Step 1: Review Your Packages

Step 2: Choose Your Integration Method

Step 3: Copy Your Script or Download Config

Option 1: Copy Script

Option 2: Download Config

Step 4: Setup Your Environment

1. Ensure you are set for organizational deployment

Please see the organizational deployment guide

2. Get the package into your environment

Option 1: Cached Package (Unreliable, Requires Internet - Same As Community)

Open Source or Commercial:
- Proxy Repository - Create a proxy nuget repository on Nexus, Artifactory Pro, or a proxy Chocolatey repository on ProGet. Point your upstream to https://community.chocolatey.org/api/v2/. Packages cache on first access automatically. Make sure your choco clients are using your proxy repository as a source and NOT the default community repository. See source command for more information.
- You can also just download the packages and push them to a repository
  Download Packages

Option 2: Internalized Package (Reliable, Scalable)

Open Source
- Download the packages:
  Download Packages
- Follow manual internalization instructions
Package Internalizer (C4B)
- Run: (additional options)
- For package and dependencies run:
- Automate package internalization

Step 5: Copy Your Script

See options you can pass to upgrade.

See best practices for scripting.

Add this to a PowerShell script or use a Batch script with tools and in places where you are calling directly to Chocolatey. If you are integrating, keep in mind enhanced exit codes.

If you do use a PowerShell script, use the following to ensure bad exit codes are shown as failures:

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###

#### We initialize a few things that are needed by this script - there are no other requirements.
$ErrorActionPreference = "Stop"

#### Set TLS 1.2 (3072) as that is the minimum required by various up-to-date repositories.
#### Use integers because the enumeration value for TLS 1.2 won't exist
#### in .NET 4.0, even though they are addressable if .NET 4.5+ is
#### installed (.NET 4.5 is an in-place upgrade).
[System.Net.ServicePointManager]::SecurityProtocol = [System.Net.ServicePointManager]::SecurityProtocol -bor 3072

#### We use this variable for future REST calls.
$RequestArguments = @{
    UseBasicParsing = $true
}

## 2. TOP LEVEL VARIABLES ##

### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
$NugetRepositoryUrl = "INTERNAL REPO URL"

### b. Internal Repository Credential ###
#### If required, add the repository access credential here
# $NugetRepositoryCredential = [PSCredential]::new(
#     "username",
#     ("password" | ConvertTo-SecureString -AsPlainText -Force)
# )
# $RequestArguments.Credential = $NugetRepositoryCredential

### c. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it
$ChocolateyDownloadUrl = "$($NugetRepositoryUrl.TrimEnd('/'))/package/chocolatey.2.2.2.nupkg"

### d. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# $ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService"

#### ii. If using a Client Salt, add it here
# $ChocolateyCentralManagementClientSalt = "clientsalt"

#### iii. If using a Service Salt, add it here
# $ChocolateyCentralManagementServiceSalt = "servicesalt"

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository

#### Download the Nupkg, appending .zip to the filename to handle archive cmdlet limitations
if (-not (Get-Command choco.exe -ErrorAction SilentlyContinue)) {
    $TempDirectory = Join-Path $env:Temp "chocolateyInstall"
    if (-not (Test-Path $TempDirectory -PathType Container)) {
        $null = New-Item -Path $TempDirectory -ItemType Directory
    }
    $DownloadedNupkg = Join-Path $TempDirectory "$(Split-Path $ChocolateyDownloadUrl -Leaf).zip"
    Invoke-WebRequest -Uri $ChocolateyDownloadUrl -OutFile $DownloadedNupkg @RequestArguments

    #### Extract the Nupkg, and run the chocolateyInstall script
    if (Get-Command Microsoft.PowerShell.Archive\Expand-Archive -ErrorAction SilentlyContinue) {
        Microsoft.PowerShell.Archive\Expand-Archive -Path $DownloadedNupkg -DestinationPath $TempDirectory -Force
    } else {
        # PowerShell versions <4.0 do not have this function available
        try {
            $shellApplication = New-Object -ComObject Shell.Application
            $zipPackage = $shellApplication.NameSpace($DownloadedNupkg)
            $destinationFolder = $shellApplication.NameSpace($TempDirectory)
            $destinationFolder.CopyHere($zipPackage.Items(), 0x10)
        } catch {
            Write-Warning "Unable to unzip package using built-in compression."
            throw $_
        }
    }

    & $(Join-Path $TempDirectory "tools\chocolateyInstall.ps1")
}

if (-not (Get-Command choco.exe -ErrorAction SilentlyContinue)) {
    refreshenv
}

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
# choco feature enable -n useFipsCompliantChecksums

### b. Apply Recommended Configuration ###
#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
choco config set --name cacheLocation --value C:\ProgramData\chocolatey\cache

#### Increase timeout to at least 4 hours
choco config set --name commandExecutionTimeoutSeconds --value 14400

#### Turn off download progress when running choco through integrations
choco feature disable --name showDownloadProgress

### c. Sources ###
#### Remove the default community package repository source
choco source list --limitoutput | ConvertFrom-Csv -Header 'Name', 'Location' -Delimiter '|' | ForEach-Object {
    if ($_.Location -eq 'https://community.chocolatey.org/api/v2/') {
        choco source remove -n $_.Name
    }
}

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE may require changes
if ($NugetRepositoryCredential) {
    choco source add --name ChocolateyInternal --source $NugetRepositoryUrl --user $NugetRepositoryCredential.UserName --password $NugetRepositoryCredential.GetNetworkCredential().Password --priority 1
} else {
    choco source add --name ChocolateyInternal --source $NugetRepositoryUrl --priority 1
}

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
choco upgrade chocolatey --confirm

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
choco install chocolatey-license --source $NugetRepositoryUrl --confirm

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
if ("chocolatey-license" -in (choco list --localonly --limitoutput | ConvertFrom-Csv -Header "Name" -Delimiter "|").Name) {
    choco source disable --name chocolatey.licensed
} else {
    Write-Warning "Not disabling 'chocolatey.licensed' feed, as Chocolatey-License has not been installed."
}

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
if ("chocolatey-license" -in (choco list --localonly --limitoutput | ConvertFrom-Csv -Header "Name" -Delimiter "|").Name) {
    choco install chocolatey.extension --source $NugetRepositoryUrl --confirm
} else {
    Write-Warning "Not installing 'chocolatey.extension', as Chocolatey-License has not been installed."
}

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
choco feature disable --name showNonElevatedWarnings
choco feature enable --name useBackgroundService
choco feature enable --name useBackgroundServiceWithNonAdministratorsOnly
choco feature enable --name allowBackgroundServiceUninstallsFromUserInstallsOnly
choco config set --name allowedBackgroundServiceCommands --value "install,upgrade,uninstall"

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
if ($ChocolateyCentralManagementUrl) {
    choco install chocolatey-agent --source $NugetRepositoryUrl --confirm
    choco config set --name CentralManagementServiceUrl --value $ChocolateyCentralManagementUrl
    if ($ChocolateyCentralManagementClientSalt) {
        choco config set --name centralManagementClientCommunicationSaltAdditivePassword --value $ChocolateyCentralManagementClientSalt
    }
    if ($ChocolateyCentralManagementServiceSalt) {
        choco config set --name centralManagementServiceCommunicationSaltAdditivePassword --value $ChocolateyCentralManagementServiceSalt
    }
    choco feature enable --name useChocolateyCentralManagement
    choco feature enable --name useChocolateyCentralManagementDeployments
}

See docs at https://docs.ansible.com/ansible/latest/modules/win_chocolatey_module.html.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. chocolatey.chocolatey
##### You will require the chocolatey.chocolatey collection to be installed
##### on all machines using this playbook.
##### Please see https://github.com/chocolatey/chocolatey-ansible/#installing-the-collection-from-ansible-galaxy

- name: Install and Configure Chocolatey
  hosts: all

## 2. TOP LEVEL VARIABLES ##
  vars:

### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
    nuget_repository_url: INTERNAL REPO URL

### b. Internal Repository Credential ###
#### If required, add the repository access credential here and
#### uncomment lines with source_username and source_password below
#    nuget_repository_username: username
#    nuget_repository_password: password

### c. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
#    chocolatey_central_management_url: https://chocolatey-central-management:24020/ChocolateyManagementService

#### ii. If using a Client Salt, add it here
#    chocolatey_central_management_client_salt: clientsalt

#### iii. If using a Service Salt, add it here
#    chocolatey_central_management_service_salt: servicesalt

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository

  tasks:
  - name: Install chocolatey
    win_chocolatey:
      name: chocolatey
      source: ""{{ nuget_repository_url }}""
      # source_username: ""{{ nuget_repository_username }}""
      # source_password: ""{{ nuget_repository_password }}""

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
#   - name: Enable FIPS compliance
#     win_chocolatey_feature:
#       name: useFipsCompliantChecksums
#       state: enabled

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
  - name: Set the cache location
    win_chocolatey_config:
      name: cacheLocation
      state: present
      value: C:\ProgramData\chocolatey\cache

#### Increase timeout to at least 4 hours
  - name: Set the command execution timeout
    win_chocolatey_config:
      name: commandExecutionTimeoutSeconds
      state: present
      value: 14400

#### Turn off download progress when running choco through integrations
  - name: Disable showing download progress
    win_chocolatey_feature:
      name: showDownloadProgress
      state: disabled

### c. Sources ###
#### Remove the default community package repository source
  - name: Remove Chocolatey Community Repository
    win_chocolatey_source:
      name: chocolatey
      state: absent

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here
#### NOTE: This EXAMPLE may require changes
  - name: Add Internal Repository
    win_chocolatey_source:
      name: ChocolateyInternal
      state: present
      source: {{ nuget_repository_url }}
      # source_username: {{ nuget_repository_username }}
      # source_password: {{ nuget_repository_password }}
      priority: 1

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
  - name: Upgrade Chocolatey
    win_chocolatey:
      name: chocolatey
      state: latest

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.
### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
  - name: Install Chocolatey License
    win_chocolatey:
      name: chocolatey-license
      source: ChocolateyInternal
      state: latest

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
  - name: Disable Chocolatey Community Repository
    win_chocolatey_source:
      name: chocolatey.licensed
      state: disabled

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
  - name: Install Chocolatey Extension
    win_chocolatey:
      name: chocolatey.extension
      source: ChocolateyInternal
      state: latest

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
  - name: Hide not-elevated warnings
    win_chocolatey_feature:
      name: showNonElevatedWarnings
      state: disabled

  - name: Use background mode for self-service
    win_chocolatey_feature:
      name: useBackgroundService
      state: enabled

  - name: Use background service for non-admins
    win_chocolatey_feature:
      name: useBackgroundServiceWithNonAdministratorsOnly
      state: enabled

  - name: Allow background uninstallation for user installs
    win_chocolatey_feature:
      name: allowBackgroundServiceUninstallsFromUserInstallsOnly
      state: enabled

  - name: Set allowed background service commands
    win_chocolatey_config:
      name: backgroundServiceAllowedCommands
      state: present
      value: install,upgrade,uninstall

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
  - name: Install Chocolatey Agent
    when: chocolatey_central_management_url is defined
    win_chocolatey:
      name: chocolatey-agent
      source: ChocolateyInternal
      state: latest

  - name: Set the Central Management Service URL
    when: chocolatey_central_management_url is defined
    win_chocolatey_config:
      name: CentralManagementServiceUrl
      state: present
      value: {{ chocolatey_central_management_url }}

  - name: Set the Central Management Client Salt
    when: chocolatey_central_management_client_salt is defined
    win_chocolatey_config:
      name: centralManagementClientCommunicationSaltAdditivePassword
      state: present
      value: {{ chocolatey_central_management_client_salt }}

  - name: Set the Central Management Service Salt
    when: chocolatey_central_management_service_salt is defined
    win_chocolatey_config:
      name: centralManagementServiceCommunicationSaltAdditivePassword
      state: present
      value: {{ chocolatey_central_management_service_salt }}

  - name: Use Central Management
    when: chocolatey_central_management_url is defined
    win_chocolatey_feature:
      name: useChocolateyCentralManagement
      state: enabled

  - name: Use Central Management Deployments
    when: chocolatey_central_management_url is defined
    win_chocolatey_feature:
      name: useChocolateyCentralManagementDeployments
      state: enabled

See docs at https://docs.chef.io/resource_chocolatey_package.html.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### The Chocolatey resources are available with any recent version of Chef.
#### We utilise the Chocolatey recipe to install the Chocolatey binaries.
include_recipe "chocolatey"

## 2. TOP LEVEL VARIABLES ##
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
NugetRepositoryUrl = "INTERNAL REPO URL"

### b. Internal Repository Credential ###
#### If required, add the repository access credential here
# NugetRepositoryUsername = "username"
# NugetRepositoryPassword = "password"

### c. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
ChocolateyNupkgUrl = "INTERNAL REPO URL/package/chocolatey.2.2.2.nupkg",

### d. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService"

#### ii. If using a Client Salt, add it here
# ChocolateyCentralManagementClientSalt = "clientsalt"

#### iii. If using a Service Salt, add it here
# ChocolateyCentralManagementServiceSalt = "servicesalt"

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
node['chocolatey']['install vars'] = {
  'chocolateyDownloadUrl' => "#{ChocolateyNupkgUrl}",
}

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
# chocolatey_feature 'useFipsCompliantChecksums' do
#   action :enable
# end

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
chocolatey_config 'cacheLocation' do
  value 'C:\ProgramData\chocolatey\cache'
end

#### Increase timeout to at least 4 hours
chocolatey_config 'commandExecutionTimeoutSeconds' do
  value '14400'
end

#### Turn off download progress when running choco through integrations
chocolatey_feature 'showDownloadProgress' do
  action :disable
end

### c. Sources ###
#### Remove the default community package repository source
chocolatey_source 'chocolatey' do
  action :remove
end

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE may require changes
chocolatey_source 'ChocolateyInternal' do
  source "#{NugetRepositoryUrl}"
  priority 1
  action   :add
end

execute 'ChocolateyInternal' do
  command "choco source add --name ChocolateyInternal -s #{NugetRepositoryUrl} -u=#{NugetRepositoryUsername} -p=#{NugetRepositoryPassword} --priority=1"
  only_if { NugetRepositoryUsername != nil || NugetRepositoryPassword != nil }
end

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
chocolatey_package 'chocolatey' do
  action :upgrade
  source "#{NugetRepositoryUrl}"
end

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
chocolatey_package 'chocolatey-license' do
  action :install
  source "#{NugetRepositoryUrl}"
end

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
chocolatey_source 'chocolatey.licensed' do
  action            :disable
end

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
chocolatey_package 'chocolatey.extention' do
  action     install
  source     "#{NugetRepositoryUrl}"
end

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
chocolatey_feature 'showNonElevatedWarnings' do
  action :disable
end

chocolatey_feature 'useBackgroundService' do
  action :enable
end

chocolatey_feature 'useBackgroundServiceWithNonAdministratorsOnly' do
  action :enable
end

chocolatey_feature 'allowBackgroundServiceUninstallsFromUserInstallsOnly' do
  action :enable
end

chocolatey_config 'backgroundServiceAllowedCommands' do
  value 'install,upgrade,uninstall'
end

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
chocolatey_package 'chocolatey-agent' do
  action     install
  source     "#{NugetRepositoryUrl}"
  # user       "#{NugetRepositoryUsername}"
  # password   "#{NugetRepositoryPassword}"
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_config 'CentralManagementServiceUrl' do
  value  "#{ChocolateyCentralManagementUrl}"
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_config 'centralManagementClientCommunicationSaltAdditivePassword' do
  value   "#{ChocolateyCentralManagementClientSalt}"
  only_if { ChocolateyCentralManagementClientSalt != nil }
end

chocolatey_config 'centralManagementServiceCommunicationSaltAdditivePassword' do
  value   "#{ChocolateyCentralManagementServiceSalt}"
  only_if { ChocolateyCentralManagementServiceSalt != nil }
end

chocolatey_feature 'useChocolateyCentralManagement' do
  action :enable
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_feature 'useChocolateyCentralManagementDeployments' do
  action :enable
  only_if { ChocolateyCentralManagementUrl != nil }
end

Requires cChoco DSC Resource. See docs at https://github.com/chocolatey/cChoco.

If Applicable - Chocolatey Configuration/Installation


#requires -Modules cChoco
## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. Requires chocolatey\cChoco DSC module to be installed on the machine compiling the DSC manifest
#### NOTE: This will need to be installed before running the DSC portion of this script
if (-not (Get-Module cChoco -ListAvailable)) {
    $null = Install-PackageProvider -Name NuGet -MinimumVersion 2.8.5.201 -Force
    if (($PSGallery = Get-PSRepository -Name PSGallery).InstallationPolicy -ne "Trusted") {
        Set-PSRepository -Name PSGallery -InstallationPolicy Trusted
    }
    Install-Module -Name cChoco
    if ($PSGallery.InstallationPolicy -ne "Trusted") {
        Set-PSRepository -Name PSGallery -InstallationPolicy $PSGallery.InstallationPolicy
    }
}

#### ii. Requires a hosted copy of the install.ps1 script
##### This should be available to download without authentication.
##### The original script can be found here: https://community.chocolatey.org/install.ps1

Configuration ChocolateyConfig {
## 2. TOP LEVEL VARIABLES ##
    param(
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
        $NugetRepositoryUrl      = "INTERNAL REPO URL",

### b. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
        $ChocolateyNupkgUrl      = "INTERNAL REPO URL/package/chocolatey.2.2.2.nupkg",

### c. Internal Repository Credential ###
#### If required, add the repository access credential here
#        $NugetRepositoryCredential = [PSCredential]::new(
#            "username",
#            ("password" | ConvertTo-SecureString -AsPlainText -Force)
#        ),

### d. Install.ps1 URL
#### The path to the hosted install script:
        $ChocolateyInstallPs1Url = "https://community.chocolatey.org/install.ps1"

### e. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
#        $ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService",

#### ii. If using a Client Salt, add it here
#        $ChocolateyCentralManagementClientSalt = "clientsalt",

#### iii. If using a Service Salt, add it here
#        $ChocolateyCentralManagementServiceSalt = "servicesalt"
    )
    Import-DscResource -ModuleName PSDesiredStateConfiguration
    Import-DscResource -ModuleName cChoco

    Node 'localhost' {
## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
        Environment chocoDownloadUrl {
            Name  = "chocolateyDownloadUrl"
            Value = $ChocolateyNupkgUrl
        }

        cChocoInstaller installChocolatey {
            DependsOn = "[Environment]chocoDownloadUrl"
            InstallDir = Join-Path $env:ProgramData "chocolatey"
            ChocoInstallScriptUrl = $ChocolateyInstallPs1Url
        }

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
#        cChocoFeature featureFipsCompliance {
#            FeatureName = "useFipsCompliantChecksums"
#        }

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
        cChocoConfig cacheLocation {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            ConfigName = "cacheLocation"
            Value      = "C:\ProgramData\chocolatey\cache"
        }

#### Increase timeout to at least 4 hours
        cChocoConfig commandExecutionTimeoutSeconds {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            ConfigName = "commandExecutionTimeoutSeconds"
            Value      = 14400
        }

#### Turn off download progress when running choco through integrations
        cChocoFeature showDownloadProgress {
            DependsOn   = "[cChocoInstaller]installChocolatey"
            FeatureName = "showDownloadProgress"
            Ensure      = "Absent"
        }

### c. Sources ###
#### Remove the default community package repository source
        cChocoSource removeCommunityRepository {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            Name       = "chocolatey"
            Ensure     = "Absent"
        }

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here.
#### NOTE: This EXAMPLE may require changes
        cChocoSource addInternalSource {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            Name        = "ChocolateyInternal"
            Source      = $NugetRepositoryUrl
            Credentials = $NugetRepositoryCredential
            Priority    = 1
        }

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
        cChocoPackageInstaller updateChocolatey {
            DependsOn   = "[cChocoSource]addInternalSource", "[cChocoSource]removeCommunityRepository"
            Name        = "chocolatey"
            AutoUpgrade = $true
        }

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
        cChocoPackageInstaller chocolateyLicense {
            DependsOn = "[cChocoPackageInstaller]updateChocolatey"
            Name      = "chocolatey-license"
        }

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
        Script disableLicensedSource {
            DependsOn  = "[cChocoPackageInstaller]chocolateyLicense"
            GetScript  = {
                $Source = choco source list --limitoutput | `
                    ConvertFrom-Csv -Delimiter '|' -Header Name, Source, Disabled | `
                    Where-Object Name -eq "chocolatey.licensed"

                return @{
                    Result = if ($Source) {
                        [bool]::Parse($Source.Disabled)
                    } else {
                        Write-Warning "Source 'chocolatey.licensed' was not present."
                        $true  # Source does not need disabling
                    }
                }
            }
            SetScript  = {
                $null = choco source disable --name "chocolatey.licensed"
            }
            TestScript = {
                $State = [ScriptBlock]::Create($GetScript).Invoke()
                return $State.Result
            }
        }

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
        cChocoPackageInstaller chocolateyLicensedExtension {
            DependsOn = "[Script]disableLicensedSource"
            Name      = "chocolatey.extension"
        }

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
        cChocoFeature hideElevatedWarnings {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "showNonElevatedWarnings"
            Ensure      = "Absent"
        }

        cChocoFeature useBackgroundService {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "useBackgroundService"
            Ensure      = "Present"
        }

        cChocoFeature useBackgroundServiceWithNonAdmins {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "useBackgroundServiceWithNonAdministratorsOnly"
            Ensure      = "Present"
        }

        cChocoFeature useBackgroundServiceUninstallsForUserInstalls {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "allowBackgroundServiceUninstallsFromUserInstallsOnly"
            Ensure      = "Present"
        }

        cChocoConfig allowedBackgroundServiceCommands {
            DependsOn   = "[cChocoFeature]useBackgroundService"
            ConfigName = "backgroundServiceAllowedCommands"
            Value       = "install,upgrade,uninstall"
        }

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
        if ($ChocolateyCentralManagementUrl) {
            cChocoPackageInstaller chocolateyAgent {
                DependsOn = "[cChocoPackageInstaller]chocolateyLicensedExtension"
                Name      = "chocolatey-agent"
            }

            cChocoConfig centralManagementServiceUrl {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                ConfigName = "CentralManagementServiceUrl"
                Value       = $ChocolateyCentralManagementUrl
            }

            if ($ChocolateyCentralManagementClientSalt) {
                cChocoConfig centralManagementClientSalt {
                    DependsOn  = "[cChocoPackageInstaller]chocolateyAgent"
                    ConfigName = "centralManagementClientCommunicationSaltAdditivePassword"
                    Value      = $ChocolateyCentralManagementClientSalt
                }
            }

            if ($ChocolateyCentralManagementServiceSalt) {
                cChocoConfig centralManagementServiceSalt {
                    DependsOn  = "[cChocoPackageInstaller]chocolateyAgent"
                    ConfigName = "centralManagementServiceCommunicationSaltAdditivePassword"
                    Value      = $ChocolateyCentralManagementServiceSalt
                }
            }

            cChocoFeature useCentralManagement {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                FeatureName = "useChocolateyCentralManagement"
                Ensure      = "Present"
            }

            cChocoFeature useCentralManagementDeployments {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                FeatureName = "useChocolateyCentralManagementDeployments"
                Ensure      = "Present"
            }
        }
    }
}

# If working this into an existing configuration with a good method for
$ConfigData = @{
    AllNodes = @(
        @{
            NodeName                    = "localhost"
            PSDscAllowPlainTextPassword = $true
        }
    )
}

try {
    Push-Location $env:Temp
    $Config = ChocolateyConfig -ConfigurationData $ConfigData
    Start-DscConfiguration -Path $Config.PSParentPath -Wait -Verbose -Force
} finally {
    Pop-Location
}

Requires Puppet Chocolatey Provider module. See docs at https://forge.puppet.com/puppetlabs/chocolatey.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. Requires puppetlabs/chocolatey module
####  See https://forge.puppet.com/puppetlabs/chocolatey


## 2. TOP LEVEL VARIABLES ##
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
$_repository_url = 'INTERNAL REPO URL'

### b. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
$_choco_download_url = 'INTERNAL REPO URL/package/chocolatey.2.2.2.nupkg'

### c. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# $_chocolatey_central_management_url = 'https://chocolatey-central-management:24020/ChocolateyManagementService'

#### ii. If using a Client Salt, add it here
# $_chocolatey_central_management_client_salt = "clientsalt"

#### iii. If using a Service Salt, add it here
# $_chocolatey_central_management_service_salt = 'servicesalt'


## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
### Note: `chocolatey_download_url is completely different than normal
###  source locations. This is directly to the bare download url for the
###  chocolatey.nupkg, similar to what you see when you browse to
###  https://community.chocolatey.org/api/v2/package/chocolatey
class {'chocolatey':
  chocolatey_download_url => $_choco_download_url,
  use_7zip                => false,
}


## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations

#chocolateyfeature {'useFipsCompliantChecksums':
#  ensure => enabled,
#}

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
chocolateyconfig {'cacheLocation':
  value => 'C:\ProgramData\chocolatey\cache',
}

#### Increase timeout to at least 4 hours
chocolateyconfig {'commandExecutionTimeoutSeconds':
  value => '14400',
}

#### Turn off download progress when running choco through integrations
chocolateyfeature {'showDownloadProgress':
  ensure => disabled,
}

### c. Sources ###
#### Remove the default community package repository source
chocolateysource {'chocolatey':
  ensure   => absent,
  location => 'https://community.chocolatey.org/api/v2/',
}

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE requires changes
chocolateysource {'internal_chocolatey':
  ensure             => present,
  location           => $_repository_url,
  priority           => 1,
  username           => 'optional',
  password           => 'optional,not ensured',
  bypass_proxy       => true,
  admin_only         => false,
  allow_self_service => false,
}

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/

package {'chocolatey':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
}


## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/guides/organizations/organizational-deployment-guide#exercise-4-create-a-package-for-the-license

# TODO: Add resource for installing/ensuring the chocolatey-license package
package {'chocolatey-license':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
}

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
## Disabled sources still need all other attributes until
## https://tickets.puppetlabs.com/browse/MODULES-4449 is resolved.
## Password is necessary with user, but not ensurable, so it should not
## matter what it is set to here. If you ever do get into trouble here,
## the password is your license GUID.
chocolateysource {'chocolatey.licensed':
  ensure   => disabled,
  priority => '10',
  user     => 'customer',
  password => '1234',
  require  => Package['chocolatey-license'],
}

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
package {'chocolatey.extension':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
  require  => Package['chocolatey-license'],
}

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
chocolateyfeature {'showNonElevatedWarnings':
  ensure => disabled,
}

chocolateyfeature {'useBackgroundService':
  ensure => enabled,
}

chocolateyfeature {'useBackgroundServiceWithNonAdministratorsOnly':
  ensure => enabled,
}

chocolateyfeature {'allowBackgroundServiceUninstallsFromUserInstallsOnly':
  ensure => enabled,
}

chocolateyconfig {'backgroundServiceAllowedCommands':
  value => 'install,upgrade,uninstall',
}

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
if $_chocolatey_central_management_url {
  package {'chocolatey-agent':
    ensure   => latest,
    provider => chocolatey,
    source   => $_repository_url,
    require  => Package['chocolatey-license'],
  }

  chocolateyconfig {'CentralManagementServiceUrl':
    value   => $_chocolatey_central_management_url,
  }

  if $_chocolatey_central_management_client_salt {
    chocolateyconfig {'centralManagementClientCommunicationSaltAdditivePassword':
      value => $_chocolatey_central_management_client_salt,
    }
  }

  if $_chocolatey_central_management_service_salt {
    chocolateyconfig {'centralManagementClientCommunicationSaltAdditivePassword':
      value => $_chocolatey_central_management_client_salt,
    }
  }

  chocolateyfeature {'useChocolateyCentralManagement':
    ensure  => enabled,
    require => Package['chocolatey-agent'],
  }

  chocolateyfeature {'useChocolateyCentralManagementDeployments':
    ensure  => enabled,
    require => Package['chocolatey-agent'],
  }
}

Need Help? View our docs or file an issue.

There is already a version of this package in your Script Builder

Current Version	New Version

Downloads:

170,032

Downloads of v 0.9.711:

441

Last Update:

07 Dec 2018

Package Maintainer(s):

Pauby

Software Author(s):

Chrissy LeMaire

Tags:

admin powershell module template dba sqlserver sql tools database

dbatools (PowerShell Module)

This is not the latest version of dbatools (PowerShell Module) available.

0.9.711 | Updated: 07 Dec 2018

Downloads:

170,032

Downloads of v 0.9.711:

441

Maintainer(s):

Pauby

Software Author(s):

Chrissy LeMaire

Tags:

admin powershell module template dba sqlserver sql tools database

dbatools (PowerShell Module) 0.9.711

This is not the latest version of dbatools (PowerShell Module) available.

Some Checks Have Failed or Are Not Yet Complete

Not All Tests Have Passed

Hide Checks

Validation Testing Passed

Verification Testing Passed

Details

Scan Testing Resulted in Investigate

Details

Learn More

Deployment Method: Individual Install, Upgrade, & Uninstall

To install dbatools (PowerShell Module), run the following command from the command line or from PowerShell:

To upgrade dbatools (PowerShell Module), run the following command from the command line or from PowerShell:

To uninstall dbatools (PowerShell Module), run the following command from the command line or from PowerShell:

NOTE

This applies to both open source and commercial editions of Chocolatey.

1. Enter Your Internal Repository Url

(this should look similar to https://community.chocolatey.org/api/v2/)

2. Setup Your Environment

1. Ensure you are set for organizational deployment

Please see the organizational deployment guide

2. Get the package into your environment

Option 1: Cached Package (Unreliable, Requires Internet - Same As Community)

Open Source or Commercial:
- Proxy Repository - Create a proxy nuget repository on Nexus, Artifactory Pro, or a proxy Chocolatey repository on ProGet. Point your upstream to https://community.chocolatey.org/api/v2/. Packages cache on first access automatically. Make sure your choco clients are using your proxy repository as a source and NOT the default community repository. See source command for more information.
- You can also just download the package and push it to a repository Download

Option 2: Internalized Package (Reliable, Scalable)

Open Source
- Download the package:
  Download
- Follow manual internalization instructions

Package Internalizer (C4B)

Run: (additional options)

choco download dbatools --internalize --version=0.9.711 --source=https://community.chocolatey.org/api/v2/

For package and dependencies run:

choco push --source="'INTERNAL REPO URL'"

Automate package internalization

3. Copy Your Script

choco upgrade dbatools -y --source="'INTERNAL REPO URL'" --version="'0.9.711'" [other options]

See options you can pass to upgrade.

See best practices for scripting.

Add this to a PowerShell script or use a Batch script with tools and in places where you are calling directly to Chocolatey. If you are integrating, keep in mind enhanced exit codes.

If you do use a PowerShell script, use the following to ensure bad exit codes are shown as failures:


choco upgrade dbatools -y --source="'INTERNAL REPO URL'" --version="'0.9.711'" 
$exitCode = $LASTEXITCODE

Write-Verbose "Exit code was $exitCode"
$validExitCodes = @(0, 1605, 1614, 1641, 3010)
if ($validExitCodes -contains $exitCode) {
  Exit 0
}

Exit $exitCode


- name: Install dbatools
  win_chocolatey:
    name: dbatools
    version: '0.9.711'
    source: INTERNAL REPO URL
    state: present

See docs at https://docs.ansible.com/ansible/latest/modules/win_chocolatey_module.html.


chocolatey_package 'dbatools' do
  action    :install
  source   'INTERNAL REPO URL'
  version  '0.9.711'
end

See docs at https://docs.chef.io/resource_chocolatey_package.html.


cChocoPackageInstaller dbatools
{
    Name     = "dbatools"
    Version  = "0.9.711"
    Source   = "INTERNAL REPO URL"
}

Requires cChoco DSC Resource. See docs at https://github.com/chocolatey/cChoco.


package { 'dbatools':
  ensure   => '0.9.711',
  provider => 'chocolatey',
  source   => 'INTERNAL REPO URL',
}

Requires Puppet Chocolatey Provider module. See docs at https://forge.puppet.com/puppetlabs/chocolatey.

4. If applicable - Chocolatey configuration/installation

See infrastructure management matrix for Chocolatey configuration elements and examples.

WARNING

There are versions of this package awaiting moderation . See the Version History section below.

Package Approved

This package was approved as a trusted package on 07 Dec 2018.

Description

dbatools logo dbatools is sort of like a command-line SQL Server Management Studio. The project initially started out as Start-SqlMigration.ps1, but has now grown into a collection of over 300 commands that help automate SQL Server tasks and encourage best practices.

NOTE: This module requires a minimum of PowerShell v3.

NOTE: This is an automatically updated package. If you find it is out of date by more than a week, please contact the maintainer(s) and let them know the package is no longer updating correctly.

Files

tools\.skipAutoUninstaller

tools\chocolateyBeforeModify.ps1

$ErrorActionPreference = 'Stop'

$moduleName = 'dbatools'      # this could be different from package name

$module = Get-Module -Name $moduleName
if ($module) {
    Write-Verbose "Module '$moduleName' is imported into the session. Removing it."
    Remove-Module -Name $moduleName -Force -ErrorAction SilentlyContinue

    if ($lib = [appdomain]::CurrentDomain.GetAssemblies() | Where-Object FullName -like "dbatools, *") {
        Write-Verbose "Found locked DLL files for module '$moduleName'."
        $moduleDir = Split-Path $module.Path -Parent
        if ($lib.Location -like "$moduleDir\*") {
            Write-Warning @"
We have detected dbatools to be already imported from '$moduleDir' and the dll files have been locked and cannot be updated.
Please close all consoles that have dbatools imported (Remove-Module dbatools is NOT enough).
"@
            throw 
        }
    }
}

tools\dbatools\bin\net452\dbatools.xml

<?xml version="1.0"?>
<doc>
    <assembly>
        <name>dbatools</name>
    </assembly>
    <members>
        <member name="T:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand">
            <summary>
            Implements the Select-DbaObject command
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.InputObject">
            <summary>
            The actual input object that is being processed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.Property">
            <summary>
            The properties to select. Supports fancy DSL
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.ExcludeProperty">
            <summary>
            Properties to skip
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.ExpandProperty">
            <summary>
            A property to expand.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.Unique">
            <summary>
            Whether to exclude duplicates
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.Last">
            <summary>
            The last number of items to pick
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.First">
            <summary>
            Pick the first n items.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.Skip">
            <summary>
            Skip n items before picking items
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.SkipLast">
            <summary>
            Skip the last n items
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.Wait">
            <summary>
            
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.Index">
            <summary>
            
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.ShowProperty">
            <summary>
            THe properties to display by default
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.ShowExcludeProperty">
            <summary>
            The properties to NOT display by default
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.TypeName">
            <summary>
            The typename to assign to the psobject
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.KeepInputObject">
            <summary>
            Keep the original input object, just add to it.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand._NonclonedProperties">
            <summary>
            List of properties to NOT clone into the hashtable used against Select-Object
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand._NoAdjustment">
            <summary>
            Whether some adjustments to the object need to be done or whether the Select-Object output can be simply passed through.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand._DisplayPropertySet">
            <summary>
            The set controlling what properties will be shown by default
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand._Pipeline">
            <summary>
            THe pipeline that is wrapped around Select-Object
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.BeginProcessing">
            <summary>
            Implements the begin action of the command
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.ProcessRecord">
            <summary>
            Implements the process action of the command
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.EndProcessing">
            <summary>
            Implements the end action of the command
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand">
            <summary>
            Implements the Set-PSFConfig command
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.FullName">
            <summary>
            The full name of the setting
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.Module">
            <summary>
            The name of the module the setting belongs to.
            Is optional due to just specifying a name is legal, in which case the first name segment becomes the module name.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.Name">
            <summary>
            The name of the setting within a module.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.Value">
            <summary>
            The value to apply.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.PersistedValue">
            <summary>
            The persisted value to apply.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.PersistedType">
            <summary>
            The persisted type to apply.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.Description">
            <summary>
            Add documentation to the setting.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.Validation">
            <summary>
            The validation script to use.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.Handler">
            <summary>
            The handling script to apply when changing the value.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.Hidden">
            <summary>
            Whether the setting should be hidden from casual discovery.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.Default">
            <summary>
            Whether the setting should be applied only when nothing exists yet.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.Initialize">
            <summary>
            Whether this is the configuration initialization call.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.SimpleExport">
            <summary>
            Enabling this will cause the module to use friendly json notation on export to file.
            This may result in loss of data precision, but is more userfriendly.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.ModuleExport">
            <summary>
            Whether this setting applies to module scope file export.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.DisableValidation">
            <summary>
            Do not apply the validation script when changing values.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.DisableHandler">
            <summary>
            Do not run the handler script when changing values.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.PassThru">
            <summary>
            Return the changed configuration setting.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.EnableException">
            <summary>
            Enable throwing exceptions.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand._Config">
            <summary>
            The configuration item changed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand._KillIt">
            <summary>
            Whether execution should be terminated silently.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand._Initialize">
            <summary>
            Whether this is an initialization execution.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand._Persisted">
            <summary>
            Whether persisted values need to be restored.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand._Exists">
            <summary>
            Whether the setting already exists.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand._PolicyEnforced">
            <summary>
            The setting to be affected was enforced by policy and cannot be changed by the user.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand._NameModule">
            <summary>
            Processed name of module.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand._NameName">
            <summary>
            Processed name of setting within module.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand._NameFull">
            <summary>
            Processed full name of setting.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand._ValidationErrorMessage">
            <summary>
            The reason validation failed.
            Filled by ApplyValue.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.BeginProcessing">
            <summary>
            Implements the begin action of Set-PSFConfig
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.ProcessRecord">
            <summary>
            Implements the process action of Set-PSFConfig
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.ApplyValue(System.Object)">
            <summary>
            Applies a value to a configuration item, invoking validation and handler scriptblocks.
            </summary>
            <param name="Value">The value to apply</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.ApplyCommonSettings">
            <summary>
            Abstracts out 
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand">
            <summary>
            Implements the Write-Message command, performing message handling and loggin
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.Level">
            <summary>
            This parameter represents the verbosity of the message. The lower the number, the more important it is for a human user to read the message.
            By default, the levels are distributed like this:
            - 1-3 Direct verbose output to the user (using Write-Host)
            - 4-6 Output only visible when requesting extra verbosity (using Write-Verbose)
            - 1-9 Debugging information, written using Write-Debug
            
            In addition, it is possible to select the level "Warning" which moves the message out of the configurable range:
            The user will always be shown this message, unless he silences the entire verbosity.
            
            Possible levels:
            Critical (1), Important / Output / Host (2), Significant (3), VeryVerbose (4), Verbose (5), SomewhatVerbose (6), System (7), Debug (8), InternalComment (9), Warning (666)
            Either one of the strings or its respective number will do as input.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.Message">
            <summary>
            The message to write/log. The function name and timestamp will automatically be prepended.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.Tag">
            <summary>
            Tags to add to the message written.
            This allows filtering and grouping by category of message, targeting specific messages.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.FunctionName">
            <summary>
            The name of the calling function.
            Will be automatically set, but can be overridden when necessary.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.ModuleName">
            <summary>
            The name of the module, the calling function is part of.
            Will be automatically set, but can be overridden when necessary.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.File">
            <summary>
            The file in which Write-Message was called.
            Will be automatically set, but can be overridden when necessary.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.Line">
            <summary>
            The line on which Write-Message was called.
            Will be automatically set, but can be overridden when necessary.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.ErrorRecord">
            <summary>
            If an error record should be noted with the message, add the full record here.
            Especially designed for use with Warning-mode, it can legally be used in either mode.
            The error will be added to the $Error variable and enqued in the logging/debugging system.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.Exception">
            <summary>
            Allows specifying an inner exception as input object. This will be passed on to the logging and used for messages.
            When specifying both ErrorRecord AND Exception, Exception wins, but ErrorRecord is still used for record metadata.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.Once">
            <summary>
            Setting this parameter will cause this function to write the message only once per session.
            The string passed here and the calling function's name are used to create a unique ID, which is then used to register the action in the configuration system.
            Thus will the lockout only be written if called once and not burden the system unduly.
            This lockout will be written as a hidden value, to see it use Get-DbaConfig -Force.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.OverrideExceptionMessage">
            <summary>
            Disables automatic appending of exception messages.
            Use in cases where you already have a speaking message interpretation and do not need the original message.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.Target">
            <summary>
            Add the object the message is all about, in order to simplify debugging / troubleshooting.
            For example, when calling this from a function targeting a remote computer, the computername could be specified here, allowing all messages to easily be correlated to the object processed.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.EnableException">
            <summary>
            This parameters disables user-friendly warnings and enables the throwing of exceptions.
            This is less user friendly, but allows catching exceptions in calling scripts.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.Breakpoint">
            <summary>
            Enables breakpoints on the current message. By default, setting '-Debug' will NOT cause an interrupt on the current position.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._timestamp">
            <summary>
            The start time of the cmdlet
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._silent">
            <summary>
            Whether this cmdlet is run in silent mode
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._fromStopFunction">
            <summary>
            Whether this cmdlet was called by Stop-Function
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._callStack">
            <summary>
            The current callstack
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._stackDepth">
            <summary>
            How many items exist on the callstack
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._message">
            <summary>
            The message to write
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._messageSimple">
            <summary>
            The message simplified without timestamps. Used for logging.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._messageColor">
            <summary>
            The message to write in color
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._messageDeveloper">
            <summary>
            Non-colored version of developermode
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._messageDeveloperColor">
            <summary>
            Colored version of developermode
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._writeHostScript">
            <summary>
            Scriptblock that writes the host messages
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._Tags">
            <summary>
            List of tags to process
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._isDebug">
            <summary>
            Whether debug mode is enabled
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._errorQualifiedMessage">
            <summary>
            The input message with the error content included if desired
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._MessageSystem">
            <summary>
            The final message to use for internal logging
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._MessageStreams">
            <summary>
            The final message to use for writing to streams, such as verbose or warning
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._MessageHost">
            <summary>
            The final message to use for host messages (write using Write-HostColor)
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._BreadCrumbsString">
            <summary>
            Provide breadcrumb queue of the callstack
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._BreadCrumbsStringColored">
            <summary>
            Provide a breadcrumb queue of the callstack in color tags
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.BeginProcessing">
            <summary>
            Processes the begin phase of the cmdlet
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.ProcessRecord">
            <summary>
            Processes the process phase of the cmdlet
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.ResolveTarget(System.Object)">
            <summary>
            Processes the target transform rules on an input object
            </summary>
            <param name="Item">The item to transform</param>
            <returns>The transformed object</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.ResolveException(System.Exception)">
            <summary>
            Processes the specified exception specified
            </summary>
            <param name="Item">The exception to process</param>
            <returns>The transformed exception</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.ResolveLevel(Sqlcollaborative.Dbatools.Message.MessageLevel)">
            <summary>
            Processs the input level and apply policy and rules
            </summary>
            <param name="Level">The original level of the message</param>
            <returns>The processed level</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.GetMessage">
            <summary>
            Builds the message item for display of Verbose, Warning and Debug streams
            </summary>
            <returns>The message to return</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.GetMessageSimple">
            <summary>
            Builds the base message for internal system use.
            </summary>
            <returns>The message to return</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.GetMessageColor">
            <summary>
            Builds the message item if needed and returns it
            </summary>
            <returns>The message to return</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.GetMessageDeveloper">
            <summary>
            Non-host output in developermode
            </summary>
            <returns>The string to write on messages that don't go straight to Write-HostColor</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.GetMessageDeveloperColor">
            <summary>
            Host output in developermode
            </summary>
            <returns>The string to write on messages that go straight to Write-HostColor</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Computer.DiskSpace">
            <summary>
            Data Container for the output of Get-DbaDiskSpace
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.ComputerName">
            <summary>
            The computer that was scanned
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.Name">
            <summary>
            Name of the disk
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.Label">
            <summary>
            Label of the disk
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.Capacity">
            <summary>
            What's the total capacity of the disk?
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.Free">
            <summary>
            How much is still free?
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.PercentFree">
            <summary>
            How much is still free
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.BlockSize">
            <summary>
            What blocksize is the object set to
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.FileSystem">
            <summary>
            What filesystem is installed on the system
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.Type">
            <summary>
            What kind of drive is it?
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.IsSqlDisk">
            <summary>
            Whether the drive is a sql disk. Nullable, because it is an optional property and may not always be included, thus a third state is necessary.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.Server">
            <summary>
            The computer that was scanned. Legacy-Name
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.DriveType">
            <summary>
            The type of drive this is in the legacy string notation
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.SizeInBytes">
            <summary>
            The total capacity in Bytes
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.FreeInBytes">
            <summary>
            The free space in Bytes
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.SizeInKB">
            <summary>
            The total capacity in KB
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.FreeInKB">
            <summary>
            The free space in KB
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.SizeInMB">
            <summary>
            The total capacity in MB
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.FreeInMB">
            <summary>
            The free space in MB
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.SizeInGB">
            <summary>
            The total capacity in GB
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.FreeInGB">
            <summary>
            The free space in GB
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.SizeInTB">
            <summary>
            The total capacity in TB
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.FreeInTB">
            <summary>
            The free space in TB
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.SizeInPB">
            <summary>
            The total capacity in PB
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.FreeInPB">
            <summary>
            The free space in PB
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Computer.DriveType">
            <summary>
            What kind of drive are you?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.DriveType.Unknown">
            <summary>
            The drive type is not actually known
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.DriveType.NoRootDirectory">
            <summary>
            The drive has no root directory
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.DriveType.RemovableDisk">
            <summary>
            The drive is a removable disk
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.DriveType.LocalDisk">
            <summary>
            The drive is a local disk
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.DriveType.NetworkDrive">
            <summary>
            The drive is a network drive
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.DriveType.CompactDisk">
            <summary>
            The drive is a compact disk
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.DriveType.RAMDisk">
            <summary>
            The drive is a RAM disk
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Computer.PageFileSetting">
            <summary>
            Data container, listing pagefile settings.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.PageFileSetting.ComputerName">
            <summary>
            The name of the computer
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.PageFileSetting.AutoPageFile">
            <summary>
            Whether Automatic PageFile management is enabled
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.PageFileSetting.FileName">
            <summary>
            The pagefile name
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.PageFileSetting.Status">
            <summary>
            The pagefile status
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.PageFileSetting.SystemManaged">
            <summary>
            Whether the pagefile is system managed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.PageFileSetting.LastModified">
            <summary>
            When were the settings last changed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.PageFileSetting.LastAccessed">
            <summary>
            When were the settings last accessed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.PageFileSetting.AllocatedBaseSize">
            <summary>
            The base allocated pagefile size in MB
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.PageFileSetting.InitialSize">
            <summary>
            The initial pagefile size in MB
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.PageFileSetting.MaximumSize">
            <summary>
            The maximum pagefile size in MB
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.PageFileSetting.PeakUsage">
            <summary>
            The maximum percent of the pagefile limit that has been used
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.PageFileSetting.CurrentUsage">
            <summary>
            The currently used percentage of the pagefile limit that is in use.
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Configuration.Config">
            <summary>
            Configuration Manager as well as individual configuration object.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.Config.Name">
            <summary>
            The Name of the setting
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Configuration.Config.FullName">
            <summary>
            The full name of the configuration entry, comprised of both Module and Name.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.Config.Module">
            <summary>
            The module of the setting. Helps being able to group configurations.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.Config.Description">
            <summary>
            A description of the specific setting
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Configuration.Config.Type">
            <summary>
            The data type of the value stored in the configuration element.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Configuration.Config.Value">
            <summary>
            The value stored in the configuration element
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Configuration.Config.SafeValue">
            <summary>
            The value stored in the configuration element, but without deserializing objects.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Configuration.Config.Unchanged">
            <summary>
            Whether the value of the configuration setting has been changed since its initialization.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.Config.Handler">
            <summary>
            The handler script that is run whenever the configuration value is set.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.Config.Validation">
            <summary>
            Validates the user input
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.Config.Hidden">
            <summary>
            Setting this to true will cause the element to not be discovered unless using the '-Force' parameter on "Get-DbaConfig"
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Configuration.Config.Initialized">
            <summary>
            Whether the setting has been initialized. This handles module imports and avoids modules overwriting settings when imported in multiple runspaces.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.Config.PolicySet">
            <summary>
            Whether this setting was set by policy
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Configuration.Config.PolicyEnforced">
            <summary>
            Whether this setting was set by policy and forbids changes to the configuration.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.Config.SimpleExport">
            <summary>
            Enabling this causes export to json to use simple json serialization for data transmission.
            This is suitable for simple data that is not sensitive to conversion losses.
            Simple export leads to exports more easily readable to the human eye.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.Config.ModuleExport">
            <summary>
            Whether this setting should be exported to a module specific file when exporting to json by modulename.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Configuration.Config.RegistryData">
            <summary>
            The finalized value to put into the registry value when using policy to set this setting.
            Deprecated property.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.Config.DefaultValue">
            <summary>
            The default value the configuration item was set to when initializing
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Configuration.Config.SetPersistedValue(Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType,System.String)">
            <summary>
            Applies the persisted value to the configuration item.
            This method should only be called by PSFramework internals
            </summary>
            <param name="Type">The type of data being specified</param>
            <param name="ValueString">The value string to register</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Configuration.Config.ResetValue">
            <summary>
            Resets the configuration value to its configured default value
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Configuration.ConfigScope">
            <summary>
            The location where a setting was applied
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigScope.UserDefault">
            <summary>
            The configuration is set as default value for the user
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigScope.UserMandatory">
            <summary>
            The configuration is enforced for the user
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigScope.SystemDefault">
            <summary>
            The configuration is set as default value for all users on the system
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigScope.SystemMandatory">
            <summary>
            The configuration is enforced for all users on the system.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigScope.FileUserLocal">
            <summary>
            The configuration is stored as Json in the per user local machine config directory.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigScope.FileUserShared">
            <summary>
            The configuration is stored as Json in the per user config directory shared across machines.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigScope.FileSystem">
            <summary>
            The configuration is stored as Json in the local computer config directory.
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Configuration.ConfigurationHost">
            <summary>
            Host class providing static configuration settings that are constant across all runspaces within the process.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationHost.Configurations">
            <summary>
            Hashtable containing all the configuration entries
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationHost.Validation">
            <summary>
            Hashtable containing all the registered validations
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationHost.ImportFromRegistryDone">
            <summary>
            Whether the import from registry has been completed. Prevents multiple imports and overwrites when importing the module multiple times.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Configuration.ConfigurationHost.ConvertToPersistedValue(System.Object)">
            <summary>
            Converts any object into its persisted state.
            </summary>
            <param name="Item">The item to convert.</param>
            <returns>Its persisted state representation.</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Configuration.ConfigurationHost.ConvertFromPersistedValue(System.String,Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType)">
            <summary>
            Converts a persisted value back to its original data type
            </summary>
            <param name="PersistedValue">The value in its persisted state</param>
            <param name="Type">The type of the persisted value</param>
            <returns>The natural state of the value originally persisted</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Configuration.ConfigurationHost.ConvertFromPersistedValue(System.String)">
            <summary>
            Converts a persisted value back to its original data type
            </summary>
            <param name="TypeQualifiedPersistedValue">The value in its persisted state, with a prefixed type identifier.</param>
            <returns>The natural state of the value originally persisted</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Configuration.ConfigurationHost.Utf8ToBase64(System.String)">
            <summary>
            Converts a plain text into a base64 string
            </summary>
            <param name="Value">The string to convert</param>
            <returns>base64 encoded version of string.</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Configuration.ConfigurationHost.Base64ToUtf8(System.String)">
            <summary>
            Converts a base64 encoded string into plain text
            </summary>
            <param name="Value">The string to convert</param>
            <returns>Plain Text string</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Configuration.ConfigurationValue">
            <summary>
            Contains all information about a configuration item's value
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Configuration.ConfigurationValue.Value">
            <summary>
            The runtime value of the setting.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Configuration.ConfigurationValue.PersistedValue">
            <summary>
            The value in its persisted state
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValue.PersistedType">
            <summary>
            The kind of 
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Configuration.ConfigurationValue.TypeQualifiedPersistedValue">
            <summary>
            The type qualified representation of the persisted value
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Configuration.ConfigurationValue.SafeValue">
            <summary>
            Ensures wanton Get-PSFConfig will not deserialize persisted objects that might have registered deserialization in their module.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValue._Value">
            <summary>
            Internal storage for the Value property
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValue._PersistedValue">
            <summary>
            Internal storage for the PersistedValue property
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Configuration.ConfigurationValue.ToString">
            <summary>
            The string representation of its actual value
            </summary>
            <returns>Returns the type-qualified string representation of its value</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Configuration.ConfigurationValue.#ctor(System.String,Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType)">
            <summary>
            Creates a value object from persisted data
            </summary>
            <param name="PersistedValue">The value that will be persisted</param>
            <param name="PersistedType">The type of the value to be persisted</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Configuration.ConfigurationValue.#ctor(System.Object)">
            <summary>
            Creates a value object from runtime data
            </summary>
            <param name="Value">The value that will be stored</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType">
            <summary>
            The data types supported by the configuration system.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType.Unknown">
            <summary>
            An unknown type, should be prevented
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType.Null">
            <summary>
            The value is as empty as the void.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType.Bool">
            <summary>
            The value is of a true/false kind
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType.Int">
            <summary>
            The value is a regular integer
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType.Double">
            <summary>
            The value is a double numeric value
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType.Long">
            <summary>
            The value is a long type
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType.String">
            <summary>
            The value is a common string
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType.Timespan">
            <summary>
            The value is a regular timespan
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType.Datetime">
            <summary>
            The value is a plain datetime
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType.ConsoleColor">
            <summary>
            The value is a fancy console color
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType.Array">
            <summary>
            The value is an array full of booty
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType.Hashtable">
            <summary>
            The value is a hashtable
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType.Object">
            <summary>
            The value is something indeterminate, but possibly complex
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Connection.ConnectionHost">
            <summary>
            Provides static tools for managing connections
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.Connections">
            <summary>
            List of all registered connections.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.BadConnectionTimeout">
            <summary>
            The time interval that must pass, before a connection using a known to not work connection protocol is reattempted
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.DisableCache">
            <summary>
            Globally disables all caching done by the Computer Management functions.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.DisableBadCredentialCache">
            <summary>
            Disables the caching of bad credentials. dbatools caches bad logon credentials for wmi/cim and will not reuse them.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.DisableCredentialAutoRegister">
            <summary>
            Disables the automatic registration of working credentials. dbatools will caches the last working credential when connecting using wmi/cim and will use those rather than using known bad credentials
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.OverrideExplicitCredential">
            <summary>
            Enabling this will force the use of the last credentials known to work, rather than even trying explicit credentials.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.EnableCredentialFailover">
            <summary>
            Enables automatic failover to working credentials, when passed credentials either are known, or turn out to not work.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.DisableCimPersistence">
            <summary>
            Globally disables the persistence of Cim sessions used to connect to a target system.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.DisableConnectionCimRM">
            <summary>
            Whether the CM connection using Cim over WinRM is disabled globally
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.DisableConnectionCimDCOM">
            <summary>
            Whether the CM connection using Cim over DCOM is disabled globally
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.DisableConnectionWMI">
            <summary>
            Whether the CM connection using WMI is disabled globally
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.DisableConnectionPowerShellRemoting">
            <summary>
            Whether the CM connection using PowerShell Remoting is disabled globally
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.SqlConnectionTimeout">
            <summary>
            The number of seconds before a sql connection attempt times out
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.PSSessions">
            <summary>
            List of all session containers used to maintain a cache
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ConnectionHost.PSSessionGet(System.Guid,System.String)">
            <summary>
            Returns a registered session for a given computer on a given runspace. Returns null if nothing is registered.
            </summary>
            <param name="Runspace">The host runspace that opened the session</param>
            <param name="ComputerName">The computer connected to</param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ConnectionHost.PSSessionSet(System.Guid,System.String,System.Management.Automation.Runspaces.PSSession)">
            <summary>
            Registeres a remote session under the owning runspace in its respective computer name
            </summary>
            <param name="Runspace">The runspace that owns the session</param>
            <param name="ComputerName">The computer the session connects to</param>
            <param name="Session">The session object</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ConnectionHost.PSSessionPurgeExpired">
            <summary>
            Searches the cache for an expired remoting session and purges it. After purging it from the list, it still needs to be closed!
            </summary>
            <returns>The session purged that then needs to be closed</returns>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.ConnectionHost.PSSessionCountExpired">
            <summary>
            The number of expired sessions 
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.PSSessionTimeout">
            <summary>
            The time until established connections will be considered expired (if available)
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.PSSessionCacheEnabled">
            <summary>
            Whether sessions should be cached at all
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Connection.ManagementConnection">
            <summary>
            Contains management connection information for a windows server
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.ManagementConnection.ComputerName">
            <summary>
            The computer to connect to
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.ManagementConnection.DisableBadCredentialCache">
            <summary>
            Locally disables the caching of bad credentials
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.ManagementConnection.DisableCredentialAutoRegister">
            <summary>
            Locally disables the caching of working credentials
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.ManagementConnection.OverrideExplicitCredential">
            <summary>
            Locally overrides explicit credentials with working ones that were cached
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.ManagementConnection.EnableCredentialFailover">
            <summary>
            Locally enables automatic failover to working credentials, when passed credentials either are known, or turn out to not work.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.ManagementConnection.DisableCimPersistence">
            <summary>
            Locally disables the persistence of Cim sessions used to connect to a target system.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.ManagementConnection.DisabledConnectionTypes">
            <summary>
            Connectiontypes that will never be used
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.RestoreDefaultConfiguration">
            <summary>
            Restores all deviations from public policy back to default
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnection.OverrideConnectionPolicy">
            <summary>
            Whether this connection adhers to the global connection lockdowns or not
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.ManagementConnection.CimRM">
            <summary>
            Did the last connection attempt using CimRM work?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnection.LastCimRM">
            <summary>
            When was the last connection attempt using CimRM?
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.ManagementConnection.CimDCOM">
            <summary>
            Did the last connection attempt using CimDCOM work?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnection.LastCimDCOM">
            <summary>
            When was the last connection attempt using CimRM?
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.ManagementConnection.Wmi">
            <summary>
            Did the last connection attempt using Wmi work?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnection.LastWmi">
            <summary>
            When was the last connection attempt using CimRM?
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.ManagementConnection.PowerShellRemoting">
            <summary>
            Did the last connection attempt using PowerShellRemoting work?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnection.LastPowerShellRemoting">
            <summary>
            When was the last connection attempt using CimRM?
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.ReportSuccess(Sqlcollaborative.Dbatools.Connection.ManagementConnectionType)">
            <summary>
            Report the successful connection against the computer of this connection
            </summary>
            <param name="Type">What connection type succeeded?</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.ReportFailure(Sqlcollaborative.Dbatools.Connection.ManagementConnectionType)">
            <summary>
            Report the failure of connecting to the target computer
            </summary>
            <param name="Type">What connection type failed?</param>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnection.Credentials">
            <summary>
            Any registered credentials to use on the connection.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnection.WindowsCredentialsAreBad">
            <summary>
            Whether the default windows credentials are known to not work against the target.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnection.UseWindowsCredentials">
            <summary>
            Whether windows credentials are known to be good. Do not build conditions on them being false, just on true.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnection.KnownBadCredentials">
            <summary>
            Credentials known to not work. They will not be used when specified.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.AddBadCredential(System.Management.Automation.PSCredential)">
            <summary>
            Adds a credentials object to the list of credentials known to not work.
            </summary>
            <param name="Credential">The bad credential that must be punished</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.AddGoodCredential(System.Management.Automation.PSCredential)">
            <summary>
            Reports a credentials object as being legit.
            </summary>
            <param name="Credential">The functioning credential that we may want to use again</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.GetCredential(System.Management.Automation.PSCredential)">
            <summary>
            Calculates, which credentials to use. Will consider input, compare it with know not-working credentials or use the configured working credentials for that.
            </summary>
            <param name="Credential">Any credential object a user may have explicitly specified.</param>
            <returns>The Credentials to use</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.IsBadCredential(System.Management.Automation.PSCredential)">
            <summary>
            Tests whether the input credential is on the list known, bad credentials
            </summary>
            <param name="Credential">The credential to test</param>
            <returns>True if the credential is known to not work, False if it is not yet known to not work</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.RemoveBadCredential(System.Management.Automation.PSCredential)">
            <summary>
            Removes an item from the list of known bad credentials
            </summary>
            <param name="Credential">The credential to remove</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.GetConnectionType(Sqlcollaborative.Dbatools.Connection.ManagementConnectionType,System.Boolean)">
            <summary>
            Returns the next connection type to try.
            </summary>
            <param name="ExcludedTypes">Exclude any type already tried and failed</param>
            <param name="Force">Overrides the timeout on bad connections</param>
            <returns>The next type to try.</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.GetConnectionTypesTimed(System.DateTime)">
            <summary>
            Returns a list of all available connection types whose inherent timeout has expired.
            </summary>
            <param name="Timestamp">All last connection failures older than this point in time are considered to be expired</param>
            <returns>A list of all valid connection types</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.GetConnectionTypesTimed(System.TimeSpan)">
            <summary>
            Returns a list of all available connection types whose inherent timeout has expired.
            </summary>
            <param name="Timespan">All last connection failures older than this far back into the past are considered to be expired</param>
            <returns>A list of all valid connection types</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.#ctor">
            <summary>
            Creates a new, empty connection object. Necessary for serialization.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.#ctor(System.String)">
            <summary>
            Creates a new default connection object, containing only its computer's name and default results.
            </summary>
            <param name="ComputerName">The computer targeted. Will be forced to lowercase.</param>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.ManagementConnection.CimWinRMOptions">
            <summary>
            The options ot use when establishing a CIM Session
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.GetDefaultCimWsmanOptions">
            <summary>
            Returns the default wsman options object
            </summary>
            <returns>Something very default-y</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.GetCimRMInstance(System.Management.Automation.PSCredential,System.String,System.String)">
            <summary>
            Get all cim instances of the appropriate class using WinRM
            </summary>
            <param name="Credential">The credentiuls to use for the connection.</param>
            <param name="Class">The class to query.</param>
            <param name="Namespace">The namespace to look in (defaults to root\cimv2).</param>
            <returns>Hopefully a mountainload of CimInstances</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.QueryCimRMInstance(System.Management.Automation.PSCredential,System.String,System.String,System.String)">
            <summary>
            Get all cim instances matching the query using WinRM
            </summary>
            <param name="Credential">The credentiuls to use for the connection.</param>
            <param name="Query">The query to use requesting information.</param>
            <param name="Dialect">Defaults to WQL.</param>
            <param name="Namespace">The namespace to look in (defaults to root\cimv2).</param>
            <returns></returns>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.ManagementConnection.CimDComOptions">
            <summary>
            The options ot use when establishing a CIM Session
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.GetDefaultCimDcomOptions">
            <summary>
            Returns the default DCom options object
            </summary>
            <returns>Something very default-y</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.GetCimDComInstance(System.Management.Automation.PSCredential,System.String,System.String)">
            <summary>
            Get all cim instances of the appropriate class using DCOM
            </summary>
            <param name="Credential">The credentiuls to use for the connection.</param>
            <param name="Class">The class to query</param>
            <param name="Namespace">The namespace to look in (defaults to root\cimv2)</param>
            <returns>Hopefully a mountainload of CimInstances</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.QueryCimDCOMInstance(System.Management.Automation.PSCredential,System.String,System.String,System.String)">
            <summary>
            Get all cim instances matching the query using DCOM
            </summary>
            <param name="Credential">The credentiuls to use for the connection.</param>
            <param name="Query">The query to use requesting information.</param>
            <param name="Dialect">Defaults to WQL.</param>
            <param name="Namespace">The namespace to look in (defaults to root\cimv2).</param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.ToString">
            <summary>
            Simple string representation
            </summary>
            <returns>Returns the computerName it is connection for</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Connection.ManagementConnectionProtocolState">
            <summary>
            The various types of state a connection-protocol may have
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnectionProtocolState.Unknown">
            <summary>
            The default initial state, before any tests are performed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnectionProtocolState.Success">
            <summary>
            A successful connection was last established
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnectionProtocolState.Error">
            <summary>
            Connecting using the relevant protocol failed last it was tried
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnectionProtocolState.Disabled">
            <summary>
            The relevant protocol has been disabled and should not be used
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Connection.ManagementConnectionType">
            <summary>
            The various ways to connect to a windows server fopr management purposes.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnectionType.None">
            <summary>
            No Connection-Type
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnectionType.CimRM">
            <summary>
            Cim over a WinRM connection
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnectionType.CimDCOM">
            <summary>
            Cim over a DCOM connection
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnectionType.Wmi">
            <summary>
            WMI Connection
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnectionType.PowerShellRemoting">
            <summary>
            Connecting with PowerShell remoting and performing WMI queries locally
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Connection.PSSessionContainer">
            <summary>
            The container that lists all sessions for a given runspace
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.PSSessionContainer.Runspace">
            <summary>
            The runspace that owns the sessions
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.PSSessionContainer.CountExpired">
            <summary>
            The count of expired sessions registered
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.PSSessionContainer.Sessions">
            <summary>
            List of sessions and their associated computer names
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.PSSessionContainer.ConnectionTimestamps">
            <summary>
            List of timestamps, when the last command was run against them
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.PSSessionContainer.#ctor(System.Guid)">
            <summary>
            Creates a list of sessions the current runspace is connected to.
            </summary>
            <param name="Runspace">The Guid of the runspace that is the owner of the registered sessions</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.PSSessionContainer.Get(System.String)">
            <summary>
            Returns the requested session.
            </summary>
            <param name="ComputerName">The name of the host whose connection to retrieve</param>
            <returns>The established connection to the host, null if none exists.</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.PSSessionContainer.Set(System.String,System.Management.Automation.Runspaces.PSSession)">
            <summary>
            Sets a session and writes its timestamp to the cache
            </summary>
            <param name="ComputerName">The hostname it connects to.</param>
            <param name="Session">The session that is being registered.</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.PSSessionContainer.GetExpiredNames">
            <summary>
            Returns the name of hostnames with expired sessions
            </summary>
            <returns>THe hostnames whose session has expired</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.PSSessionContainer.PurgeExpiredSession">
            <summary>
            Removes an expired session from the cache, an returns it, so it can be properly closed.
            </summary>
            <returns>Returns a session to disconnect</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Connection.SqlConnectionProtocol">
            <summary>
            The protocol to connect over via SMO
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.SqlConnectionProtocol.Any">
            <summary>
            Connect using any protocol available
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.SqlConnectionProtocol.TCP">
            <summary>
            Connect using TCP/IP
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.SqlConnectionProtocol.NP">
            <summary>
            Connect using named pipes or shared memory
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Database.BackupHistory">
            <summary>
            Object containing the information about the history of mankind ... or a database backup. WHo knows.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.ComputerName">
            <summary>
            The name of the computer running MSSQL Server
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.InstanceName">
            <summary>
            The Instance that was queried
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.SqlInstance">
            <summary>
            The full Instance name as seen from outside
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.Database">
            <summary>
            The Database that was backed up
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.UserName">
            <summary>
            The user that is running the backup
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.Start">
            <summary>
            When was the backup started
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.End">
            <summary>
            When did the backup end
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.Duration">
            <summary>
            What was the longest duration among the backups
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.Path">
            <summary>
            Where is the backup stored
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.TotalSize">
            <summary>
            What is the total size of the backup
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.CompressedBackupSize">
            <summary>
            What is the total compressesed size of the backup
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.CompressionRatio">
            <summary>
            What is the ratio of total size to compressed size of the backup
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.Type">
            <summary>
            The kind of backup this was
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.BackupSetId">
            <summary>
            The ID for the Backup job
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.DeviceType">
            <summary>
            What kind of backup-device was the backup stored to
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.Software">
            <summary>
            What is the name of the backup software?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.FullName">
            <summary>
            The full name of the backup
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.FileList">
            <summary>
            The files that are part of this backup
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.Position">
            <summary>
            The position of the backup
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.FirstLsn">
            <summary>
            The first Log Sequence Number
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.DatabaseBackupLsn">
            <summary>
            The Log Squence Number that marks the beginning of the backup
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.CheckpointLsn">
            <summary>
            The checkpoint's Log Sequence Number
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.LastLsn">
            <summary>
            The last Log Sequence Number
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.SoftwareVersionMajor">
            <summary>
            The primary version number of the Sql Server
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.IsCopyOnly">
            <summary>
            Was the backup performed with the CopyOnlyOption
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.LastRecoveryForkGUID">
            <summary>
            Recovery Fork backup was takeon
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.RecoveryModel">
            <summary>
            Recovery Model of the database when backup was taken
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Database.Dependency">
            <summary>
            Class containing all dependency information over a database object
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.Dependency.ComputerName">
            <summary>
            The name of the SQL server from whence the query came
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.Dependency.ServiceName">
            <summary>
            Name of the service running the database containing the dependency
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.Dependency.SqlInstance">
            <summary>
            The Instance the database containing the dependency is running in.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.Dependency.Dependent">
            <summary>
            The name of the dependent
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.Dependency.Type">
            <summary>
            The kind of object the dependent is
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.Dependency.Owner">
            <summary>
            The owner of the dependent (usually the Database)
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.Dependency.IsSchemaBound">
            <summary>
            Whether the dependency is Schemabound. If it is, then the creation statement order is of utmost importance.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.Dependency.Parent">
            <summary>
            The immediate parent of the dependent. Useful in multi-tier dependencies.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.Dependency.ParentType">
            <summary>
            The type of object the immediate parent is.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.Dependency.Script">
            <summary>
            The script used to create the object.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.Dependency.Tier">
            <summary>
            The tier in the dependency hierarchy tree. Used to determine, which dependency must be applied in which order.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.Dependency.Object">
            <summary>
            The smo object of the dependent.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.Dependency.Urn">
            <summary>
            The Uniform Resource Name of the dependent.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.Dependency.OriginalResource">
            <summary>
            The object of the original resource, from which the dependency hierachy has been calculated.
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord">
            <summary>
            An error record written by dbatools
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord.CategoryInfo">
            <summary>
            The category of the error
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord.ErrorDetails">
            <summary>
            The details on the error
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord.Exception">
            <summary>
            The actual exception thrown
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord.FullyQualifiedErrorId">
            <summary>
            The specific error identity, used to identify the target
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord.InvocationInfo">
            <summary>
            The details of how this was called.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord.ScriptStackTrace">
            <summary>
            The script's stacktrace
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord.TargetObject">
            <summary>
            The object being processed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord.FunctionName">
            <summary>
            The name of the function throwing the error
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord.Timestamp">
            <summary>
            When was the error thrown
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord.Message">
            <summary>
            The message that was written in a userfriendly manner
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord.Runspace">
            <summary>
            The runspace the error occured on.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord.#ctor">
            <summary>
            Create an empty record
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord.#ctor(System.Management.Automation.ErrorRecord,System.String,System.DateTime,System.String)">
            <summary>
            Create a filled out error record
            </summary>
            <param name="Record">The original error record</param>
            <param name="FunctionName">The function that wrote the error</param>
            <param name="Timestamp">When was the error generated</param>
            <param name="Message">What message was passed when writing the error</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord.#ctor(System.Management.Automation.ErrorRecord,System.String,System.DateTime,System.String,System.Guid)">
            <summary>
            Create a filled out error record
            </summary>
            <param name="Record">The original error record</param>
            <param name="FunctionName">The function that wrote the error</param>
            <param name="Timestamp">When was the error generated</param>
            <param name="Message">What message was passed when writing the error</param>
            <param name="Runspace">The ID of the runspace writing the error. Used to separate output between different runspaces in the same process.</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.dbaSystem.DebugHost">
            <summary>
            Hosts static debugging values and methods
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.DebugHost.ImportTimeEntries">
            <summary>
            Lists the duration for the last import of dbatools.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.dbaSystem.DebugHost.ImportTime">
            <summary>
            Returns the calculated time each phase took during the last import of dbatool.
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.dbaSystem.StartTimeEntry">
            <summary>
            Entry containing the information of a step during the import sequence
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.dbaSystem.StartTimeEntry.Action">
            <summary>
            The action that has been taken
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.dbaSystem.StartTimeEntry.Timestamp">
            <summary>
            When was the action taken?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.StartTimeEntry.Runspace">
            <summary>
            The runspace the entry was written on
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.dbaSystem.StartTimeEntry.#ctor(System.String,System.DateTime,System.Guid)">
            <summary>
            Creates a new StartTimeEntry
            </summary>
            <param name="Action">The action that has been taken</param>
            <param name="Timestamp">When was the action taken?</param>
            <param name="Runspace">The runspace the entry was written on</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.dbaSystem.StartTimeResult">
            <summary>
            The processed result how long a given step took
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.dbaSystem.StartTimeResult.Action">
            <summary>
            What action was taken?
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.dbaSystem.StartTimeResult.Duration">
            <summary>
            How long did things take?
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.dbaSystem.StartTimeResult.Start">
            <summary>
            When did this action start?
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.dbaSystem.StartTimeResult.End">
            <summary>
            When did this action end?
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.dbaSystem.StartTimeResult.#ctor(System.String,System.DateTime,System.DateTime)">
            <summary>
            Creates a new StartTimeResult with all values preconfigured
            </summary>
            <param name="Action">The action that was taken</param>
            <param name="Start">When did the action start?</param>
            <param name="End">When did the action end?</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.dbaSystem.SystemHost">
            <summary>
            Provides system-wide static resources regarding the dbatools system runtime in general
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.SystemHost.UnattendedMode">
            <summary>
            When this is set to true, functions must assume dbatools is in unattended mode. May not ask for user input of any kind.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.dbaSystem.SystemHost.ModuleBase">
            <summary>
            Path where the module was located when imported
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.SystemHost.ModuleImported">
            <summary>
            Flag whether the module has ever been imported in the current process. If that is true, several things (such as importing libraries) is no longer necessary and will be skipped on import.
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Discovery.DbaBrowserReply">
            <summary>
            The reply the browser service gave
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaBrowserReply.MachineName">
            <summary>
            The machine name of the computer
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaBrowserReply.ComputerName">
            <summary>
            the computername of the computer
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaBrowserReply.SqlInstance">
            <summary>
            The instance running on the computer
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaBrowserReply.InstanceName">
            <summary>
            The name of the instance, running on the computer
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaBrowserReply.TCPPort">
            <summary>
            The port number the instance is running under
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaBrowserReply.Version">
            <summary>
            The version of the SQL Server
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaBrowserReply.IsClustered">
            <summary>
            Whether the instance is part of a cluster or no.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Discovery.DbaBrowserReply.ToString">
            <summary>
            Override in order to make it look neater in PowerShell
            </summary>
            <returns></returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Discovery.DbaInstanceAvailability">
            <summary>
            Indiciator for whether an instance is known to be available or not
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceAvailability.Unknown">
            <summary>
            It is not known, whether the instance is available or not
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceAvailability.Available">
            <summary>
            The instance is known to be available
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceAvailability.Unavailable">
            <summary>
            The instance is known to be not available
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Discovery.DbaInstanceConfidenceLevel">
            <summary>
            How high is our confidence that this is a valid instance?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceConfidenceLevel.None">
            <summary>
            No confidence at all. There is virtually no way for this to be an instance
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceConfidenceLevel.Low">
            <summary>
            We have a few indications, but couldn't follow them up
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceConfidenceLevel.Medium">
            <summary>
            We're fairly sure this is legit, but can't guarantee it
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceConfidenceLevel.High">
            <summary>
            This absolutely is an instance
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Discovery.DbaInstanceDiscoveryType">
            <summary>
            What discovery mechanisms to use
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceDiscoveryType.IPRange">
            <summary>
            We shall sweep the network for instances, by targeting every IP within a range.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceDiscoveryType.Domain">
            <summary>
            We shall search for SQL SPNs in active directory
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceDiscoveryType.DataSourceEnumeration">
            <summary>
            We shall use the SSMS Data Sizrce Enumeration mechanism and hope for the best
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceDiscoveryType.All">
            <summary>
            We shall use all tools in our control to find stuff
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport">
            <summary>
            The report on a discovered instance
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.MachineName">
            <summary>
            The computername of the underlying machine. Usually equal to the computername, but may differ in case of clusters
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.ComputerName">
            <summary>
            The computername of the target
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.InstanceName">
            <summary>
            The name of the instance
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.FullName">
            <summary>
            The full server instance name
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.SqlInstance">
            <summary>
            The full name usable to connect via SMO
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.Port">
            <summary>
            The port number the server listens on
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.Timestamp">
            <summary>
            When the scan was concluded
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.TcpConnected">
            <summary>
            Was a TCP connect successful?
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.SqlConnected">
            <summary>
            Was a connection via SQL successful (even if we got access denied)
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.DnsResolution">
            <summary>
            The DNS Resolution object
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.Ping">
            <summary>
            The ping resolution object
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.BrowseReply">
            <summary>
            The reply received from the browse request
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.Services">
            <summary>
            The windows services for the instance
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.SystemServices">
            <summary>
            The SQL Server services that do not belong to that instance alone
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.SPNs">
            <summary>
            Service Principal Names found
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.PortsScanned">
            <summary>
            The ports that have been scanned
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.Availability">
            <summary>
            What we know about its availability
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.Confidence">
            <summary>
            How confident we are, that this is a real instance
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.ScanTypes">
            <summary>
            What we used to scan the instance
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Discovery.DbaInstanceScanType">
            <summary>
            The mechanisms we use to determine, whether a given host contains a legit instance
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceScanType.TCPPort">
            <summary>
            Try connecting to specific ports
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceScanType.SqlConnect">
            <summary>
            Try to connect to discovered instances (improves confidence)
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceScanType.SqlService">
            <summary>
            Check the windows services on the target
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceScanType.DNSResolve">
            <summary>
            Try resolving a computername in DNS
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceScanType.SPN">
            <summary>
            Scan the SPNs for the targeted computer
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceScanType.Browser">
            <summary>
            Try contacting the local browser service and demand answers
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceScanType.Ping">
            <summary>
            See whether you can ping the host
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceScanType.All">
            <summary>
            Do EVERYTHING
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceScanType.Default">
            <summary>
            Do all the things we consider sane defaults
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Discovery.DbaPortReport">
            <summary>
            We tried to connect to a port, how did it go?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaPortReport.ComputerName">
            <summary>
            The name of the computer connected to
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaPortReport.Port">
            <summary>
            The number of the port we tried to connect to.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaPortReport.IsOpen">
            <summary>
            Whether the port was open
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Discovery.DbaPortReport.#ctor">
            <summary>
            Creates an empty report (serialization uses this)
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Discovery.DbaPortReport.#ctor(System.String,System.Int32,System.Boolean)">
            <summary>
            Creates a filled in report
            </summary>
            <param name="ComputerName">The name of the computer connected to</param>
            <param name="Port">The port we tried to connect to</param>
            <param name="IsOpen">Whether things worked out</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Discovery.DbaPortReport.ToString">
            <summary>
            Displays port connection reports in a user friendly manner
            </summary>
            <returns></returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Exceptions.BloodyHellGiveMeSomethingToWorkWithException">
            <summary>
            An exception that is thrown by parameter classes when given empty input
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Exceptions.BloodyHellGiveMeSomethingToWorkWithException.ParameterClass">
            <summary>
            The parameter class that did the throwing
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Exceptions.BloodyHellGiveMeSomethingToWorkWithException.#ctor(System.String,System.Exception)">
            <summary>
            Creates an exception with a message and a nested exception
            </summary>
            <param name="Message">The message to tell</param>
            <param name="Inner">The inner exception to nest</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Exceptions.BloodyHellGiveMeSomethingToWorkWithException.#ctor(System.String,System.String)">
            <summary>
            Creates an exception with a message and a ParameterClass
            </summary>
            <param name="Message">The message to tell</param>
            <param name="ParameterClass">The Parameter Class that threw the exception</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Exceptions.BloodyHellGiveMeSomethingToWorkWithException.#ctor(System.String,System.Exception,System.String)">
            <summary>
            Creates an exception with a message, a nested exception and a ParameterClass
            </summary>
            <param name="Message">The message to tell</param>
            <param name="Inner">The inner exception to nest</param>
            <param name="ParameterClass">The Parameter Class that threw the exception</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.General.ExecutionMode">
            <summary>
            What kind of mode do you want to run a command in?
            This allows the user to choose how a dbatools function handles a bump in the execution where terminating directly may not be actually mandated.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.General.ExecutionMode.Strict">
            <summary>
            When encountering issues, terminate, or skip the currently processed input, rather than continue.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.General.ExecutionMode.Lazy">
            <summary>
            Continue as able with a best-effort attempt. Simple verbose output should do the rest.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.General.ExecutionMode.Report">
            <summary>
            Continue, but provide output that can be used to identify the operations that had issues.
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Maintenance.MaintenanceHost">
            <summary>
            Host class providing access to resources need to perform dbatools maintenance
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Maintenance.MaintenanceHost.Tasks">
            <summary>
            The register of available tasks.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Maintenance.MaintenanceHost.HasDueTasks">
            <summary>
            Whether there are any due tasks
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Maintenance.MaintenanceHost.GetNextTask(System.String[])">
            <summary>
            Returns the next task to perform. Returns null when there are no more tasks to perform
            </summary>
            <param name="Exclusions">List of tasks not to return, even if they are ready to execute again. This avoids one misconfigured task starving all lower priority tasks</param>
            <returns>The next task to perform.</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Maintenance.MaintenancePriority">
            <summary>
            How high the priority of the task. Higher priority tasks take precedence over low priority tasks.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Maintenance.MaintenancePriority.Trivial">
            <summary>
            This task is completely trivial and can be done whenever there is some spare time for it
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Maintenance.MaintenancePriority.Low">
            <summary>
            The task is not very significant, but should be dealt with at some point
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Maintenance.MaintenancePriority.Medium">
            <summary>
            Average priority task
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Maintenance.MaintenancePriority.High">
            <summary>
            An important task that will take precedence over most other tasks
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Maintenance.MaintenancePriority.Critical">
            <summary>
            A task so critical, that it should be considered to move it to synchronous execution instead.
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Maintenance.MaintenanceTask">
            <summary>
            An individual task assigned to the maintenance engine
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Maintenance.MaintenanceTask.Name">
            <summary>
            The name of the task to execute. No duplciates are possible.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Maintenance.MaintenanceTask.Once">
            <summary>
            Whether the task should be done once only
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Maintenance.MaintenanceTask.Interval">
            <summary>
            The interval at which the task should be performed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Maintenance.MaintenanceTask.Delay">
            <summary>
            If the task need not be performed right away, it can be delayed, in order to prioritize more important initialization tasks
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Maintenance.MaintenanceTask.Registered">
            <summary>
            When was the task first registered. Duplicate registration calls will not increment this value.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Maintenance.MaintenanceTask.LastExecution">
            <summary>
            When was the task last executed.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Maintenance.MaintenanceTask.Priority">
            <summary>
            How important is this task?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Maintenance.MaintenanceTask.ScriptBlock">
            <summary>
            The task code to execute
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Maintenance.MaintenanceTask.IsDue">
            <summary>
            Whether the task is due and should be executed
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Message.DbatoolsException">
            <summary>
            Wrapper class that can emulate any exception for purpose of serialization without blowing up the storage space consumed
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.DbatoolsException.GetException">
            <summary>
            Returns the original exception object that we interpreted. This is on purpose not a property, as we want to avoid messing with serialization size.
            </summary>
            <returns>The original exception that got thrown</returns>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.Message">
            <summary>
            The actual Exception Message
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.Source">
            <summary>
            The original source of the Exception
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.StackTrace">
            <summary>
            Where on the callstack did the exception occur?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.TargetSite">
            <summary>
            What was the target site on the code that caused it. This property has been altered to avoid export issues, if a string representation is not sufficient, access the original exception using GetException()
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.HResult">
            <summary>
            The HResult of the exception. Useful in debugging native code errors.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.HelpLink">
            <summary>
            Link to a proper help article.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.Data">
            <summary>
            Additional data that has been appended
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.InnerException">
            <summary>
            The inner exception in a chain of exceptions.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.ExceptionTypeName">
            <summary>
            The full namespace name of the exception that has been wrapped.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.ExceptionData">
            <summary>
            Contains additional properties other exceptions might contain.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.CategoryInfo">
            <summary>
            The category of the error
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.ErrorDetails">
            <summary>
            The details on the error
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.FullyQualifiedErrorId">
            <summary>
            The specific error identity, used to identify the target
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.InvocationInfo">
            <summary>
            The details of how this was called.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.ScriptStackTrace">
            <summary>
            The script's stacktrace
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.TargetObject">
            <summary>
            The object being processed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.FunctionName">
            <summary>
            The name of the function throwing the error
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.Timestamp">
            <summary>
            When was the error thrown
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.Runspace">
            <summary>
            The runspace the error occured on.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.ComputerName">
            <summary>
            The computer the error occured on.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.DbatoolsException.#ctor">
            <summary>
            Creates an empty exception object. Mostly for serialization support
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.DbatoolsException.#ctor(System.Exception)">
            <summary>
            Creates an exception based on an original exception object
            </summary>
            <param name="Except">The exception to wrap around</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.DbatoolsException.#ctor(System.Management.Automation.ErrorRecord)">
            <summary>
            Creates a rich information exception object based on a full error record as recorded by PowerShell
            </summary>
            <param name="Record">The error record to copy from</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.DbatoolsException.#ctor(System.Exception,System.String,System.DateTime,System.String,System.Guid,System.String)">
            <summary>
            Creates a new exception object with rich meta information from the PowerShell runtime.
            </summary>
            <param name="Except">The exception thrown</param>
            <param name="FunctionName">The name of the function in which the error occured</param>
            <param name="Timestamp">When did the error occur</param>
            <param name="Message">The message to add to the exception</param>
            <param name="Runspace">The ID of the runspace from which the exception was thrown. Useful in multi-runspace scenarios.</param>
            <param name="ComputerName">The computer the error occured on.</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.DbatoolsException.#ctor(System.Management.Automation.ErrorRecord,System.String,System.DateTime,System.String,System.Guid,System.String)">
            <summary>
            Creates a new exception object with rich meta information from the PowerShell runtime.
            </summary>
            <param name="Record">The error record written</param>
            <param name="FunctionName">The name of the function in which the error occured</param>
            <param name="Timestamp">When did the error occur</param>
            <param name="Message">The message to add to the exception</param>
            <param name="Runspace">The ID of the runspace from which the exception was thrown. Useful in multi-runspace scenarios.</param>
            <param name="ComputerName">The computer the error occured on.</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.DbatoolsException.ToString">
            <summary>
            Returns a string representation of the exception.
            </summary>
            <returns></returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Message.DbatoolsExceptionRecord">
            <summary>
            Carrier class, designed to hold an arbitrary number of exceptions. Used for exporting to XML in nice per-incident packages.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsExceptionRecord.Runspace">
            <summary>
            Runspace where shit happened.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsExceptionRecord.ComputerName">
            <summary>
            The computer name the exception was written on
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsExceptionRecord.Timestamp">
            <summary>
            When did things go bad?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsExceptionRecord.FunctionName">
            <summary>
            Name of the function, where fail happened.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsExceptionRecord.ModuleName">
            <summary>
            The module of the function where fail happened
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsExceptionRecord.Tags">
            <summary>
            The tags that were applied to the failure
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsExceptionRecord.Message">
            <summary>
            The message the poor user was shown.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.DbatoolsExceptionRecord.ExceptionType">
            <summary>
            Displays the name of the exception, the make scanning exceptions easier.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.DbatoolsExceptionRecord.TargetObject">
            <summary>
            The target object of the first exception in the list, if any
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsExceptionRecord.Exceptions">
            <summary>
            List of Exceptions that are part of the incident (usually - but not always - only one).
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.DbatoolsExceptionRecord.#ctor">
            <summary>
            Creates an empty container. Ideal for the homeworker who loves doing it all himself.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.DbatoolsExceptionRecord.#ctor(Sqlcollaborative.Dbatools.Message.DbatoolsException)">
            <summary>
            Creates a container filled with the first exception.
            </summary>
            <param name="Exception"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.DbatoolsExceptionRecord.#ctor(System.Guid,System.String,System.DateTime,System.String,System.String,System.Collections.Generic.List{System.String},System.String)">
            <summary>
            Creates a container filled with the meta information but untouched by exceptions
            </summary>
            <param name="Runspace">The runspace where it all happened</param>
            <param name="ComputerName">The computer the error was recorded</param>
            <param name="Timestamp">When did it happen?</param>
            <param name="FunctionName">Where did it happen?</param>
            <param name="ModuleName">The name of the module where fail happened</param>
            <param name="Tags">The tags that were assigned to the failure</param>
            <param name="Message">What did the witness have to say?</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Message.LogEntry">
            <summary>
            An individual entry for the message log
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntry.Message">
            <summary>
            The message logged
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntry.Type">
            <summary>
            What kind of entry was this?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntry.Timestamp">
            <summary>
            When was the message logged?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntry.FunctionName">
            <summary>
            What function wrote the message
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntry.ModuleName">
            <summary>
            The name of the module of the function that wrote the message
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntry.Tags">
            <summary>
            The tags applied to the message
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntry.Level">
            <summary>
            What level was the message?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntry.Runspace">
            <summary>
            What runspace was the message written from?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntry.ComputerName">
            <summary>
            The computer the message was generated on
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntry.TargetObject">
            <summary>
            The object that was the focus of this message.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntry.File">
            <summary>
            The file from which the message was written.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntry.Line">
            <summary>
            The line on which the message was written.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntry.CallStack">
            <summary>
            The callstack when the message was written.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntry.Username">
            <summary>
            The user that did the writing.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.LogEntry.#ctor">
            <summary>
            Creates an empty log entry
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.LogEntry.#ctor(System.String,Sqlcollaborative.Dbatools.Message.LogEntryType,System.DateTime,System.String,System.String,System.Collections.Generic.List{System.String},Sqlcollaborative.Dbatools.Message.MessageLevel,System.Guid,System.String,System.Object,System.String,System.Int32,System.Collections.Generic.IEnumerable{System.Management.Automation.CallStackFrame},System.String)">
            <summary>
            Creates a filled out log entry
            </summary>
            <param name="Message">The message that was logged</param>
            <param name="Type">The type(s) of message written</param>
            <param name="Timestamp">When was the message logged</param>
            <param name="FunctionName">What function wrote the message</param>
            <param name="ModuleName">Name of the module the function writing this message came from</param>
            <param name="Tags">Tags that were applied to the message</param>
            <param name="Level">What level was the message written at.</param>
            <param name="Runspace">The ID of the runspace that wrote the message.</param>
            <param name="ComputerName">The computer the message was generated on.</param>
            <param name="TargetObject">The object this message was all about.</param>
            <param name="File">The file of the code that wrote the message.</param>
            <param name="Line">The line on which the message was written.</param>
            <param name="CallStack">The callstack that triggered the write.</param>
            <param name="Username">The user responsible for running the code that is writing the message.</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Message.LogEntryType">
            <summary>
            The kind of information the logged entry was.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntryType.None">
            <summary>
            This entry wasn't written to any stream
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntryType.Information">
            <summary>
            A message that was written to the current host equivalent, if available also to the information stream
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntryType.Verbose">
            <summary>
            A message that was written to the verbose stream
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntryType.Debug">
            <summary>
            A message that was written to the Debug stream
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntryType.Warning">
            <summary>
            A message written to the warning stream
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Message.LogHost">
            <summary>
            Provides static information storage for logging related settings, as well as housing the logging queues.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogHost.MaxErrorCount">
            <summary>
            The maximum numbers of error records maintained in-memory.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogHost.MaxMessageCount">
            <summary>
            The maximum number of messages that can be maintained in the in-memory message queue
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogHost.MaxMessagefileBytes">
            <summary>
            The maximum size of a given logfile. When reaching this limit, the file will be abandoned and a new log created. Set to 0 to not limit the size.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogHost.MaxMessagefileCount">
            <summary>
            The maximum number of logfiles maintained at a time. Exceeding this number will cause the oldest to be culled. Set to 0 to disable the limit.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogHost.MaxErrorFileBytes">
            <summary>
            The maximum size all error files combined may have. When this number is exceeded, the oldest entry is culled.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogHost.MaxTotalFolderSize">
            <summary>
            This is the upper limit of length all items in the log folder may have combined across all processes.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogHost.LoggingPath">
            <summary>
            Path to where the logfiles live.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogHost.MaxLogFileAge">
            <summary>
            Any logfile older than this will automatically be cleansed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogHost.MessageLogFileEnabled">
            <summary>
            Governs, whether a log file for the system messages is written
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogHost.MessageLogEnabled">
            <summary>
            Governs, whether a log of recent messages is kept in memory
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogHost.ErrorLogFileEnabled">
            <summary>
            Governs, whether log files for errors are written
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogHost.ErrorLogEnabled">
            <summary>
            Governs, whether a log of recent errors is kept in memory
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogHost.OutQueueError">
            <summary>
            The outbound queue for errors. These will be processed and written to xml
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogHost.OutQueueLog">
            <summary>
            The outbound queue for logs. These will be processed and written to logfile
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.LogHost.GetErrors">
            <summary>
            Retrieves a copy of the Error stack
            </summary>
            <returns>All errors thrown by functions using the message or flowcontrol system</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.LogHost.GetLog">
            <summary>
            Retrieves a copy of the message log
            </summary>
            <returns>All messages logged this session.</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.LogHost.WriteErrorEntry(System.Management.Automation.ErrorRecord[],System.String,System.String,System.Collections.Generic.List{System.String},System.DateTime,System.String,System.Guid,System.String)">
            <summary>
            Write an error record to the log
            </summary>
            <param name="Record">The actual error record as powershell wrote it</param>
            <param name="FunctionName">The name of the function writing the error</param>
            <param name="ModuleName">The name of the module the function writing the error came from</param>
            <param name="Tags">The tags that were assigned to the error event</param>
            <param name="Timestamp">When was the error written</param>
            <param name="Message">What message was passed to the user</param>
            <param name="Runspace">The runspace the message was written from</param>
            <param name="ComputerName">The computer the error was written on</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.LogHost.WriteLogEntry(System.String,Sqlcollaborative.Dbatools.Message.LogEntryType,System.DateTime,System.String,System.String,System.Collections.Generic.List{System.String},Sqlcollaborative.Dbatools.Message.MessageLevel,System.Guid,System.String,System.String,System.Int32,System.Collections.Generic.IEnumerable{System.Management.Automation.CallStackFrame},System.String,System.Object)">
            <summary>
            Write a new entry to the log
            </summary>
            <param name="Message">The message to log</param>
            <param name="Type">The type of the message logged</param>
            <param name="Timestamp">When was the message generated</param>
            <param name="FunctionName">What function wrote the message</param>
            <param name="ModuleName">What module did the function writing this message come from?</param>
            <param name="Tags">The tags that were applied to the message</param>
            <param name="Level">At what level was the function written</param>
            <param name="Runspace">The runspace the message is coming from</param>
            <param name="ComputerName">The computer the message was generated on</param>
            <param name="File">The file from which the message was written</param>
            <param name="Line">The line on which the message was written</param>
            <param name="TargetObject">The object associated with a given message.</param>
            <param name="CallStack">The callstack at the moment the message was written.</param>
            <param name="Username">The name of the user under which the code being executed</param>
            <returns>The entry that is being written</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Message.MessageEventSubscription">
            <summary>
            Condition and logic to be executed on message events
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.Name">
            <summary>
            Name of the event subscription, must be unique.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.ScriptBlock">
            <summary>
            Scriptblock to execute if the condition is met
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageEventSubscription._MessageFilter">
            <summary>
            The internally stored filter value for Message
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.MessageFilter">
            <summary>
            The value the Message is filtered by
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.MessageFilterSet">
            <summary>
            Whether filtering by Message was enabled
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageEventSubscription._ModuleNameFilter">
            <summary>
            The internally stored filter value for ModuleName
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.ModuleNameFilter">
            <summary>
            The value the ModuleName is filtered by
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.ModuleNameFilterSet">
            <summary>
            Whether filtering by ModuleName was enabled
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageEventSubscription._FunctionNameFilter">
            <summary>
            The internally stored filter value for FunctionName
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.FunctionNameFilter">
            <summary>
            The value the FunctionName is filtered by
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.FunctionNameFilterSet">
            <summary>
            Whether filtering by FunctionName was enabled
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageEventSubscription._TargetFilter">
            <summary>
            The internally stored filter value for Target
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.TargetFilter">
            <summary>
            The value the Target is filtered by
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.TargetFilterSet">
            <summary>
            Whether filtering by Target was enabled
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageEventSubscription._LevelFilter">
            <summary>
            The internally stored filter value for Level
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.LevelFilter">
            <summary>
            The value the Level is filtered by
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.LevelFilterSet">
            <summary>
            Whether filtering by Level was enabled
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageEventSubscription._TagFilter">
            <summary>
            The internally stored filter value for Tag
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.TagFilter">
            <summary>
            The value the Tag is filtered by
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.TagFilterSet">
            <summary>
            Whether filtering by Tag was enabled
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageEventSubscription._RunspaceFilter">
            <summary>
            The internally stored filter value for Runspace
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.RunspaceFilter">
            <summary>
            The value the Runspace is filtered by
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.RunspaceFilterSet">
            <summary>
            Whether filtering by Runspace was enabled
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.Applies(Sqlcollaborative.Dbatools.Message.LogEntry)">
            <summary>
            Checks, whether a given entry matches the filter defined in this subscription
            </summary>
            <param name="Entry">The entry to validate</param>
            <returns>Whether the subscription should react to this entry</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Message.MessageHost">
            <summary>
            Provides static resources to the messaging subsystem
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.MaximumInformation">
            <summary>
            The maximum message level to still display to the user directly.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.MaximumVerbose">
            <summary>
            The maxium message level where verbose information is still written.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.MaximumDebug">
            <summary>
            The maximum message level where debug information is still written.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.MinimumInformation">
            <summary>
            The minimum required message level for messages that will be shown to the user.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.MinimumVerbose">
            <summary>
            The minimum required message level where verbose information is written.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.MinimumDebug">
            <summary>
            The minimum required message level where debug information is written.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.InfoColor">
            <summary>
            The color stuff gets written to the console in
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.InfoColorEmphasis">
            <summary>
            The color important stuff gets written to the console in
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.InfoColorSubtle">
            <summary>
            The color background stuff gets written to the console in
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.DeveloperColor">
            <summary>
            The color stuff gets written to the console in, when developer mode is enabled and the message would not have been written after all
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.DeveloperMode">
            <summary>
            Enables the developer mode. In this all messages are written to the console, in order to make it easier to troubleshoot issues.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.NestedLevelDecrement">
            <summary>
            Message levels can decrease by nested level. This causes messages to have an increasingly reduced level as the size of the callstack increases. 
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.DisableVerbosity">
            <summary>
            Globally override all verbosity
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.EnableMessageTimestamp">
            <summary>
            Include message timestamps in verbose message output
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.EnableMessageDisplayCommand">
            <summary>
            Include the message display command in the verbose message output
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.EnableMessageBreadcrumbs">
            <summary>
            Include the entire callstack in the verbose message output
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.TransformErrorQueueSize">
            <summary>
            The size of the transform error queue. When adding more than this, the oldest entry will be discarded
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.ExceptionTransforms">
            <summary>
            Provides the option to transform exceptions based on the original exception type
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.TargetTransforms">
            <summary>
            Provides the option to transform target objects based on type. This is sometimes important when working with live state objects that should not be serialized.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.TransformErrors">
            <summary>
            The list of transformation errors that occured.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.MessageHost.GetTransformErrors">
            <summary>
            Returns the current queue of failed transformations
            </summary>
            <returns>The list of transformations that failed</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.MessageHost.WriteTransformError(System.Management.Automation.ErrorRecord,System.String,System.String,System.Object,Sqlcollaborative.Dbatools.Message.TransformType,System.Guid)">
            <summary>
            Writes a new transform error
            </summary>
            <param name="Record">The record of what went wrong</param>
            <param name="FunctionName">The name of the function writing the transformed message</param>
            <param name="ModuleName">The module the function writing the transformed message is part of</param>
            <param name="Object">The object that should have been transformed</param>
            <param name="Type">The type of transform that was attempted</param>
            <param name="Runspace">The runspace it all happened on</param>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.ExceptionTransformList">
            <summary>
            List of custom transforms for exceptions
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.TargetTransformlist">
            <summary>
            List of custom transforms for targets
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.MessageLevelModifiers">
            <summary>
            List of all modifiers that apply to message levels
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.Events">
            <summary>
            List of events that subscribe to messages being written
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Message.MessageLevel">
            <summary>
            The various levels of verbosity available.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevel.Critical">
            <summary>
            Very important message, should be shown to the user as a high priority
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevel.Important">
            <summary>
            Important message, the user should read this
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevel.Output">
            <summary>
            Important message, the user should read this
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevel.Significant">
            <summary>
            Message relevant to the user.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevel.VeryVerbose">
            <summary>
            Not important to the regular user, still of some interest to the curious
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevel.Verbose">
            <summary>
            Background process information, in case the user wants some detailed information on what is currently happening.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevel.SomewhatVerbose">
            <summary>
            A footnote in current processing, rarely of interest to the user
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevel.System">
            <summary>
            A message of some interest from an internal system persepctive, but largely irrelevant to the user.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevel.Debug">
            <summary>
            Something only of interest to a debugger
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevel.InternalComment">
            <summary>
            This message barely made the cut from being culled. Of purely development internal interest, and even there is 'interest' a strong word for it.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevel.Warning">
            <summary>
            This message is a warning, sure sign something went badly wrong
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Message.MessageLevelModifier">
            <summary>
            A modification to a given message's level
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevelModifier.Name">
            <summary>
            Name of the modifier. Prevents duplication in a multi-runspace scenario.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevelModifier.Modifier">
            <summary>
            The amount to modify the level by
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevelModifier.IncludeFunctionName">
            <summary>
            Apply modifier only to messages from this function.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevelModifier.ExcludeFunctionName">
            <summary>
            Apply modifier not when the message is written by this function.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevelModifier.IncludeModuleName">
            <summary>
            Apply modifier only to messages from this module
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevelModifier.ExcludeModuleName">
            <summary>
            Do not apply modifier to messages from this module
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevelModifier.IncludeTags">
            <summary>
            Only apply this modifier to a message that includes at least one of these tags
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevelModifier.ExcludeTags">
            <summary>
            Do not apply this modifier to a message that includes any of the following tags
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.MessageLevelModifier.AppliesTo(System.String,System.String,System.Collections.Generic.List{System.String})">
            <summary>
            Tests, whether a message a message should be modified by this modiier
            </summary>
            <param name="FunctionName">The name of the function writing the message</param>
            <param name="ModuleName">The name of the module, the function writing this message comes from</param>
            <param name="Tags">The tags of the message written</param>
            <returns>Whether the message applies</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Message.TransformCondition">
            <summary>
            A condition, under which the object shall be transaformed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.TransformCondition.TypeName">
            <summary>
            Name of the type. All similar types (as determined by the '-like' operator) will be transformed.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.TransformCondition.ModuleName">
            <summary>
            The name of the module to consider, using the -Like operator
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.TransformCondition.FunctionName">
            <summary>
            The name of the function name to consider, using the -Like operator
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.TransformCondition.ScriptBlock">
            <summary>
            The scriptblock that performs the transformation
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.TransformCondition.Type">
            <summary>
            What kind of transformation is being performed?
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.TransformCondition.#ctor(System.String,System.String,System.String,System.Management.Automation.ScriptBlock,Sqlcollaborative.Dbatools.Message.TransformType)">
            <summary>
            Initializes a transform condition
            </summary>
            <param name="TypeName">Only objects of similar name will be transformed</param>
            <param name="ModuleName">Only objects coming from similar modules will be considered</param>
            <param name="FunctionName">Only objects coming from similar functions will be considered</param>
            <param name="ScriptBlock">The scriptblock used for the transformation</param>
            <param name="Type">What kind of transformation this is</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Message.TransformError">
            <summary>
            An error occured during a message transformation
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.TransformError.Record">
            <summary>
            The error record of what went wrong
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.TransformError.FunctionName">
            <summary>
            The name of the function writing the message that failed to transform
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.TransformError.ModuleName">
            <summary>
            The name of the module the command writing the message came from
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.TransformError.Timestamp">
            <summary>
            When did it all happen?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.TransformError.Object">
            <summary>
            The object that was supposed to be transformed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.TransformError.Type">
            <summary>
            The kind of transform that failed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.TransformError.Runspace">
            <summary>
            The runspace it all happened on
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.TransformError.#ctor(System.Management.Automation.ErrorRecord,System.String,System.String,System.Object,Sqlcollaborative.Dbatools.Message.TransformType,System.Guid)">
            <summary>
            Creates a new transform error
            </summary>
            <param name="Record">The record of what went wrong</param>
            <param name="FunctionName">The name of the function writing the transformed message</param>
            <param name="ModuleName">The module the function writing the transformed message is part of</param>
            <param name="Object">The object that should have been transformed</param>
            <param name="Type">The type of transform that was attempted</param>
            <param name="Runspace">The runspace it all happened on</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Message.TransformList">
            <summary>
            List engine, managing the lists for a message transformation type
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.TransformList.GetAll">
            <summary>
            Returns all entries in the list.
            </summary>
            <returns>The list of transforms contained within</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.TransformList.IsListed(Sqlcollaborative.Dbatools.Message.TransformCondition)">
            <summary>
            Returns whether the actual object is part of the list
            </summary>
            <param name="Condition">The object to test for list membership</param>
            <returns>Whether the object is listed</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.TransformList.IsContained(Sqlcollaborative.Dbatools.Message.TransformCondition)">
            <summary>
            Returns whether a condition with equal conditions already exists
            </summary>
            <param name="Condition">The condition to test</param>
            <returns>Whether the referenced condition is already listed</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.TransformList.Add(Sqlcollaborative.Dbatools.Message.TransformCondition)">
            <summary>
            Adds a condition to the list, if there is no equivalent condition present.
            </summary>
            <param name="Condition">The condition to add</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.TransformList.Remove(Sqlcollaborative.Dbatools.Message.TransformCondition)">
            <summary>
            Removes a condition from the lsit of conditional transforms
            </summary>
            <param name="Condition">The condition to remove</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.TransformList.Get(System.String,System.String,System.String)">
            <summary>
            Returns the first transform whose filter is similar enough to work out.
            </summary>
            <param name="TypeName">The name of the type to check for a transform</param>
            <param name="ModuleName">The module of the command that wrote the message with the transformable object</param>
            <param name="Functionname">The command that wrote the message with the transformable object</param>
            <returns>Either a transform or null, if no fitting transform was found</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Message.TransformType">
            <summary>
            The messaging system provides these kinds of transformations for input.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.TransformType.Target">
            <summary>
            A target transform can transform the target object specified. Used for live-state objects that should not be serialized on a second thread.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.TransformType.Exception">
            <summary>
            An exception transform allows automatic transformation of exceptions. Primarily used to unwrap exceptions from an API that wraps all exceptions.
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Parameter.DbaCmConnectionParameter">
            <summary>
            Input converter for Computer Management Information
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaCmConnectionParameter.Connection">
            <summary>
            The resolved connection object
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaCmConnectionParameter.Success">
            <summary>
            Whether input processing was successful
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaCmConnectionParameter.InputObject">
            <summary>
            The object actually passed to the class
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCmConnectionParameter.op_Implicit(Sqlcollaborative.Dbatools.Parameter.DbaCmConnectionParameter)~Sqlcollaborative.Dbatools.Connection.ManagementConnection">
            <summary>
            Implicitly convert all connection parameter objects to the connection-type
            </summary>
            <param name="Input">The parameter object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCmConnectionParameter.#ctor(System.String)">
            <summary>
            Creates a new DbaWmConnectionParameter based on an input-name
            </summary>
            <param name="ComputerName">The name of the computer the connection is stored for.</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCmConnectionParameter.#ctor(Sqlcollaborative.Dbatools.Connection.ManagementConnection)">
            <summary>
            Creates a new DbaWmConnectionParameter based on an already existing connection object.
            </summary>
            <param name="Connection">The connection to accept</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCmConnectionParameter.#ctor(System.Object)">
            <summary>
            Tries to convert a generic input object into a true input.
            </summary>
            <param name="Input">Any damn object in the world</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCmConnectionParameter.#ctor(Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter)">
            <summary>
            Creates a new DbaCmConnectionParameter based on an instance parameter
            </summary>
            <param name="Instance">The instance to interpret</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter">
            <summary>
            Parameter class that handles the various kinds of credential input
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.Credential">
            <summary>
            The credential object received
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.UserName">
            <summary>
            The name of the credential object
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.Password">
            <summary>
            The password of the credential object
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.#ctor(System.Management.Automation.PSCredential)">
            <summary>
            Creates a credential parameter from a PSCredential object
            </summary>
            <param name="Credential">A PSCredential object</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.#ctor(System.Net.NetworkCredential)">
            <summary>
            Creates a credential parameter from a NetworkCredential object
            </summary>
            <param name="Credential">The credentials to use</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.#ctor(System.Object)">
            <summary>
            Creates a credential parameter from anything it nows how to handle
            </summary>
            <param name="Credential">The object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.op_Implicit(Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter)~System.Management.Automation.PSCredential">
            <summary>
            Implicitly converts from DbaCredentialParameter to PSCredential
            </summary>
            <param name="Input">The DbaCredentialParameter to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.op_Implicit(System.Management.Automation.PSCredential)~Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter">
            <summary>
            Implicitly converts a PSCredential object to DbaCredenitalParameter
            </summary>
            <param name="Input">The PSCredential to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.op_Implicit(Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter)~System.Net.NetworkCredential">
            <summary>
            Implicitly converts from DbaCredentialParameter to NetworkCredential
            </summary>
            <param name="Input">The DbaCredentialParameter to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.op_Implicit(System.Net.NetworkCredential)~Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter">
            <summary>
            Implicitly converts a NetworkCredential object to DbaCredenitalParameter
            </summary>
            <param name="Input">The NetworkCredential to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.GetNetworkCredential">
            <summary>
            Legacy wrapper. While there exists implicit conversion, this allows using the object as before, avoiding errors for unknown method.
            </summary>
            <returns>A network credential object with the same credentials as the original object</returns>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.CredentialStore">
            <summary>
            Cached credentials, if the user stors them under a name.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.GetTypeCode">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToBoolean(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToChar(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToSByte(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToByte(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToInt16(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToUInt16(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToInt32(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToUInt32(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToInt64(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToUInt64(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToSingle(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToDouble(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToDecimal(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToDateTime(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToString(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToType(System.Type,System.IFormatProvider)">
            <summary>
            Tries to convert the credential parameter to one of its supported types
            </summary>
            <param name="TargetType">The type to convert to</param>
            <param name="Format">Irrelevant</param>
            <returns></returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Parameter.DbaDatabaseParameter">
            <summary>
            Parameter class that accepts anything pointing at a database
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaDatabaseParameter.InputObject">
            <summary>
            The original object passed to the parameter
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaDatabaseParameter.Database">
            <summary>
            The SMO Database Object
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaDatabaseParameter.Name">
            <summary>
            The name of the database
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaDatabaseParameter.#ctor(System.String)">
            <summary>
            Accepts the name of a database and converts it to a DbaDatabaseParameter
            </summary>
            <param name="Name"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaDatabaseParameter.#ctor(System.Object)">
            <summary>
            Accepts anything and tries to convert it to a live SMO Database object
            </summary>
            <param name="Item">The item to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaDatabaseParameter.ToString">
            <summary>
            Overrides the regular tostring to show something pleasant and useful
            </summary>
            <returns>The name of the database</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Parameter.DbaDatabaseSmoParameter">
            <summary>
            Parameter class that only accepts live SMO Databases
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaDatabaseSmoParameter.InputObject">
            <summary>
            The original object passed to the parameter
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaDatabaseSmoParameter.Database">
            <summary>
            The SMO Database Object
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaDatabaseSmoParameter.Name">
            <summary>
            The name of the database
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaDatabaseSmoParameter.#ctor(System.Object)">
            <summary>
            Accepts anything and tries to convert it to a live SMO Database object
            </summary>
            <param name="Item">The item to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaDatabaseSmoParameter.ToString">
            <summary>
            Overrides the regular tostring to show something pleasant and useful
            </summary>
            <returns>The name of the database</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Parameter.DbaInstanceInputType">
            <summary>
            What kind of object was bound to the parameter class?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaInstanceInputType.Default">
            <summary>
            Anything, really. An unspecific not reusable type was bound
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaInstanceInputType.Linked">
            <summary>
            A live smo linked server object was bound
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaInstanceInputType.Server">
            <summary>
            A live smo server object was bound
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaInstanceInputType.RegisteredServer">
            <summary>
            A Central Management Server RegisteredServer SMO object was bound
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaInstanceInputType.ConnectionString">
            <summary>
            An actual connection string was specified. Connection strings are directly reused for SMO connections
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaInstanceInputType.ConnectionStringLocalDB">
            <summary>
            A connection string pointing at a local, file-based DB
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaInstanceInputType.SqlConnection">
            <summary>
            An already established sql connection to was created outside of SMO
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter">
            <summary>
            Input converter for instance information
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.ComputerName">
            <summary>
            Name of the computer as resolvable by DNS
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.InstanceName">
            <summary>
            Name of the instance on the target server
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.Port">
            <summary>
            The port over which to connect to the server. Only present if non-default
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.NetworkProtocol">
            <summary>
            The network protocol to connect over
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.IsLocalHost">
            <summary>
            Verifies, whether the specified computer is localhost or not.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.FullName">
            <summary>
            Full name of the instance, including the server-name
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.FullSmoName">
            <summary>
            Full name of the instance, including the server-name, used when connecting via SMO
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.SqlComputerName">
            <summary>
            Name of the computer as used in an SQL Statement
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.SqlInstanceName">
            <summary>
            Name of the instance as used in an SQL Statement
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.SqlFullName">
            <summary>
            Full name of the instance, including the server-name as used in an SQL statement
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.IsConnectionString">
            <summary>
            Whether the input is a connection string
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.InputObject">
            <summary>
            The original object passed to the parameter class.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.Type">
            <summary>
            What kind of object was bound to the parameter class? For efficiency's purposes.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.LinkedLive">
            <summary>
            Returns, whether a live SMO object was bound for the purpose of accessing LinkedServer functionality
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.LinkedServer">
            <summary>
            Returns the available Linked Server objects from live objects only
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.op_Implicit(Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter)~System.String">
            <summary>
            Converts the parameter class to its full name
            </summary>
            <param name="Input">The parameter class object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.#ctor(System.String)">
            <summary>
            Creates a DBA Instance Parameter from string
            </summary>
            <param name="Name">The name of the instance</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.#ctor(System.Net.IPAddress)">
            <summary>
            Creates a DBA Instance Parameter from an IPAddress
            </summary>
            <param name="Address"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.#ctor(System.Net.NetworkInformation.PingReply)">
            <summary>
            Creates a DBA Instance Parameter from the reply to a ping
            </summary>
            <param name="Ping">The result of a ping</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.#ctor(System.Net.IPHostEntry)">
            <summary>
            Creates a DBA Instance Parameter from the result of a dns resolution
            </summary>
            <param name="Entry">The result of a dns resolution, to be used for targetting the default instance</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.#ctor(System.Data.SqlClient.SqlConnection)">
            <summary>
            Creates a DBA Instance Parameter from an established SQL Connection
            </summary>
            <param name="Connection">The connection to reuse</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.#ctor(Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport)">
            <summary>
            Accept and understand discovery reports.
            </summary>
            <param name="Report">The report to interpret</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.#ctor(System.Object)">
            <summary>
            Creates a DBA Instance parameter from any object
            </summary>
            <param name="Input">Object to parse</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.ToString">
            <summary>
            Overrides the regular <c>ToString()</c> to show something pleasant and useful
            </summary>
            <returns>The <see cref="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.FullSmoName"/></returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Parameter.DbaSelectParameter">
            <summary>
            Class that automatically parses input chosen for the -Property parameter of Select-PSUObject
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaSelectParameter.InputObject">
            <summary>
            The original input object
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaSelectParameter.Value">
            <summary>
            The value as Select-Object wants it
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaSelectParameter.#ctor(System.String)">
            <summary>
            Builds a property parameter from string
            </summary>
            <param name="Value">The string to interpret</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaSelectParameter.#ctor(System.Collections.Hashtable)">
            <summary>
            Builds a select parameter from a hashtable (pretty straightforward)
            </summary>
            <param name="Hash">The hashtable to accept</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Parameter.ParameterContractAttribute">
            <summary>
            The attribute used to define the elements of a ParameterClass contract
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.ParameterContractAttribute.Type">
            <summary>
            Returns the type of the element this attribute is supposed to be attached to.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.ParameterContractAttribute.Behavior">
            <summary>
            Returns the behavior to expect from the contracted element. This sets the expectations on how this element is likely to act.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.ParameterContractAttribute.#ctor(Sqlcollaborative.Dbatools.Parameter.ParameterContractType,Sqlcollaborative.Dbatools.Parameter.ParameterContractBehavior)">
            <summary>
            Ceates a perfectly common parameter contract attribute. For use with all parameter classes' public elements.
            </summary>
            <param name="Type"></param>
            <param name="Behavior"></param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Parameter.ParameterContractBehavior">
            <summary>
            Defines how this element will behave
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.ParameterContractBehavior.NotContracted">
            <summary>
            This elements is not actually part of the contract. Generally you wouldn't want to add the attribute at all in that case. However, in some places it helps avoiding confusion.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.ParameterContractBehavior.Mandatory">
            <summary>
            This element may never be null and must be considered in all assignments. Even if the element is de facto not nullable, all constructors must assign it.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.ParameterContractBehavior.Optional">
            <summary>
            This element may contain data, but is not required to. In case of a method, it may simply do nothing
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.ParameterContractBehavior.Failable">
            <summary>
            This method may throw an error when executing and should always be handled with try/catch. Use this on methods that use external calls.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.ParameterContractBehavior.Arbiter">
            <summary>
            The content of the thus marked field determines the dependent's state. Generally, only if the arbiter is true, will the dependent elements be mandatory. This behavior may only be assigned to boolean fields.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.ParameterContractBehavior.Conditional">
            <summary>
            This behavior can be assigned together with the 'Mandatory' behavior. It means the field is only mandatory if an arbiter field is present and set to true.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.ParameterContractBehavior.Conversion">
            <summary>
            Converts content. Generally applied only to operators, but some methods may also convert information.
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Parameter.ParameterContractType">
            <summary>
            Defines what kind of element is granted the contract
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.ParameterContractType.Field">
            <summary>
            The contracted element is a field containing a value
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.ParameterContractType.Method">
            <summary>
            The contracted element is a method, performing an action
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.ParameterContractType.Operator">
            <summary>
            The contracted element is an operator, facilitating type conversion. Generally into a dedicated object type this parameterclass abstracts.
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Runspace.DbaRunspaceState">
            <summary>
            Contains the state a managed, unique runspace can be in.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Runspace.DbaRunspaceState.Running">
            <summary>
            The runspace is up and running
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Runspace.DbaRunspaceState.Stopping">
            <summary>
            The runspace has received the stop order, but has not yet obeyed it
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Runspace.DbaRunspaceState.Stopped">
            <summary>
            The runspace has followed its order to stop and is currently disabled
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Runspace.RunspaceContainer">
            <summary>
            Class that contains the logic necessary to manage a unique runspace
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Runspace.RunspaceContainer.Name">
            <summary>
            The name of the runspace.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Runspace.RunspaceContainer.RunspaceGuid">
            <summary>
            The Guid of the running Runspace
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Runspace.RunspaceContainer.SetScript(System.Management.Automation.ScriptBlock)">
            <summary>
            Sets the script to execute in the runspace. Will NOT take immediate effect. Only after restarting the runspace will it be used.
            </summary>
            <param name="Script">The scriptblock to execute</param>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Runspace.RunspaceContainer.State">
            <summary>
            The state the runspace currently is in.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Runspace.RunspaceContainer.Start">
            <summary>
            Starts the Runspace.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Runspace.RunspaceContainer.SetName(System.Management.Automation.Runspaces.Runspace)">
            <summary>
            Sets the name on a runspace. This WILL FAIL for PowerShell v3!
            </summary>
            <param name="Runspace">The runspace to be named</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Runspace.RunspaceContainer.Stop">
            <summary>
            Gracefully stops the Runspace
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Runspace.RunspaceContainer.Kill">
            <summary>
            Very ungracefully kills the runspace. Use only in the most dire emergency.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Runspace.RunspaceContainer.SignalStopped">
            <summary>
            Signals the registered runspace has stopped execution
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Runspace.RunspaceContainer.#ctor(System.String,System.Management.Automation.ScriptBlock)">
            <summary>
            Creates a new runspace container with the basic information needed
            </summary>
            <param name="Name">The name of the Runspace</param>
            <param name="Script">The code using the runspace logic</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Runspace.RunspaceHost">
            <summary>
            Provides hosting for all registered runspaces
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Runspace.RunspaceHost.StopTimeoutSeconds">
            <summary>
            The number of seconds before a Stop command is interrupted and instead the runspace is gracelessly shut down.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Runspace.RunspaceHost.Runspaces">
            <summary>
            The dictionary containing the definitive list of unique Runspace
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.TabExpansion.InstanceAccess">
            <summary>
            Contains information on access to an instance
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.InstanceAccess.InstanceName">
            <summary>
            The name of the instance to access
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.InstanceAccess.IsSysAdmin">
            <summary>
            Whether the account had sysadmin privileges. On multiple user usage, the cache will prefer sysadmin accounts.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.InstanceAccess.ConnectionObject">
            <summary>
            The actual connection object to connect with to the server
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.InstanceAccess.LastAccess">
            <summary>
            When was the instance last accessed using dbatools
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.InstanceAccess.LastUpdate">
            <summary>
            When was the instance's TEPP cache last updated
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.TabExpansion.ScriptContainer">
            <summary>
            Regular container to store scripts in, that are used in TEPP
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.ScriptContainer.Name">
            <summary>
            The name of the scriptblock
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.ScriptContainer.ScriptBlock">
            <summary>
            The scriptblock doing the logic
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.ScriptContainer.LastExecution">
            <summary>
            The last time the scriptblock was called. Must be updated by the scriptblock itself
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.ScriptContainer.LastDuration">
            <summary>
            The time it took to run the last time
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.TabExpansion.TabCompletionSet">
            <summary>
            Contains information used to transmit Tepp Assignment
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabCompletionSet.Command">
            <summary>
            The name of the command to complete. "*" if all commands that have the parameter should be selected instead
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabCompletionSet.Parameter">
            <summary>
            The parameter to complete
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabCompletionSet.Script">
            <summary>
            The name of the script to complete with
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.TabExpansion.TabCompletionSet.#ctor(System.String,System.String,System.String)">
            <summary>
            Creates a new tab completion set object with all information prefilled
            </summary>
            <param name="Command">The name of the command to complete. "*" if all commands that have the parameter should be selected instead</param>
            <param name="Parameter">The parameter to complete</param>
            <param name="Script">The name of the script to complete with</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.TabExpansion.TabCompletionSet.Applies(System.String,System.String)">
            <summary>
            Tests, whether the completion set applies to the specified parameter / command combination
            </summary>
            <param name="Command">The command to test</param>
            <param name="Parameter">The parameter of the command to test</param>
            <returns>Whether this completion set applies to the specified combination of parameter / command</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost">
            <summary>
            Class that handles the static fields supporting the dbatools TabExpansion implementation
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.Scripts">
            <summary>
            Field containing the scripts that were registered.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.Cache">
            <summary>
            The cache used by scripts utilizing TabExpansionPlusPlus in dbatools
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.InstanceAccess">
            <summary>
            List of instances and when they were last accessed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.TeppGatherScriptsFast">
            <summary>
            Scripts that build the cache and are suitable for synchronous execution
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.TeppGatherScriptsSlow">
            <summary>
            Scripts that build the cache and are not suitable for synchronous execution
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.DbatoolsCommands">
            <summary>
            A list of all commands imported into dbatools
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.TabCompletionSets">
            <summary>
            List of completion sets that should be processed into Tepp Assignments. Only populate this list on first import.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.TeppAssignment">
            <summary>
            Maps a TEPP scriptblock to a command and parameter
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.SetInstance(System.String,System.Object,System.Boolean)">
            <summary>
            Registers a new instance or updates an already existing one. Should only be called from Connect-SqlInstance and Connect-DbaSqlServer
            </summary>
            <param name="InstanceName">Name of the instance connected to</param>
            <param name="Connection">To connection object containing the relevant information for accessing the instance</param>
            <param name="IsSysAdmin">Whether the account connecting to the instnace has SA privileges</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.GetTeppScript(System.String,System.String)">
            <summary>
            Returns the assigned scriptblock for a given parameter
            </summary>
            <param name="Command">The command that should be completed</param>
            <param name="Parameter">The parameter completion is provided for</param>
            <returns>Either the relevant script container or null</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.SetTeppScript(System.String,System.String,System.String)">
            <summary>
            Assigns a registered script to the parameter of a command
            </summary>
            <param name="Command">The command for which to complete</param>
            <param name="Parameter">The parameter for which to complete</param>
            <param name="Script">To name of the script with which to complete</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.AddTabCompletionSet(System.String,System.String,System.String)">
            <summary>
            Adds a completion set to the list of items to process
            </summary>
            <param name="Command">The command to complete for (accepts wildcard matching)</param>
            <param name="Parameter">The parameter to complete for (accepts wildcard matching)</param>
            <param name="Script">The script to register</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.CalculateTabExpansion">
            <summary>
            Processes the content of TabCompletionSets and Scripts into TappAssignments based on the DbatoolsCommands list.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.TeppDisabled">
            <summary>
            Whether TEPP in its entirety is disabled
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.TeppAsyncDisabled">
            <summary>
            Whether asynchronous TEPP updating should be disabled
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.TeppSyncDisabled">
            <summary>
            Whether synchronous TEPP updating should be disabled
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.TeppUpdateInterval">
            <summary>
            The interval in which asynchronous TEPP cache updates are performed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.TeppUpdateTimeout">
            <summary>
            After this timespan of no requests to a server, the updates to its cache are disabled.
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.TypeConversion.DbaCredentialParameterConverter">
            <summary>
            Converts to and from DbaCredentialparameter
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.TypeConversion.DbaCredentialParameterConverter.CanConvertTo(System.Object,System.Type)">
            <summary>
            Verifies, whether a conversion for the object to the target type is possible
            </summary>
            <param name="SourceValue">The object to convert</param>
            <param name="DestinationType">The type to convert to</param>
            <returns>Whether it's possible, duh!</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.TypeConversion.DbaCredentialParameterConverter.ConvertTo(System.Object,System.Type,System.IFormatProvider,System.Boolean)">
            <summary>
            Converts from DbaCredentialparameter to whatever destination type is attempted
            </summary>
            <param name="sourceValue">The source object. Better be a DbaCredentialparameter!</param>
            <param name="destinationType">Should be a supported destination type</param>
            <param name="formatProvider">Irrelevant</param>
            <param name="ignoreCase">Irrelevant</param>
            <returns>The target content type</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.TypeConversion.DbaCredentialParameterConverter.CanConvertFrom(System.Object,System.Type)">
            <summary>
            Verifies, whether a conversion for the object from the source type to DbaCredentialParameter is possible
            </summary>
            <param name="SourceValue">The object to convert</param>
            <param name="DestinationType">The source type to convert to</param>
            <returns>Whether it's possible, duh!</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.TypeConversion.DbaCredentialParameterConverter.ConvertFrom(System.Object,System.Type,System.IFormatProvider,System.Boolean)">
            <summary>
            Converts a source object to DbaCredentialparameter
            </summary>
            <param name="sourceValue">The source object</param>
            <param name="destinationType">The destination type. Must be DbaCredentialParameter, or red stuff happens</param>
            <param name="formatProvider">Irrelevant</param>
            <param name="ignoreCase">Irrelevant</param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.TypeConversion.DbaCredentialParameterConverter.IsSupportedType(System.Type)">
            <summary>
            Returns, whether a given type is supported for conversion
            </summary>
            <param name="type">The type to validate</param>
            <returns>Whether it's a supported conversion</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Utility.DateTimeExtension">
            <summary>
            Extends DateTime
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DateTimeExtension.CompareTo(System.DateTime,Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase)">
            <summary>
            Adds a compareTo method to DateTime to compare with DbaDateTimeBase
            </summary>
            <param name="Base">The extended DateTime object</param>
            <param name="comparedTo">The DbaDateTimeBase to compare with</param>
            <returns></returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Utility.DbaDate">
            <summary>
            A dbatools-internal datetime wrapper for neater display
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.#ctor(System.DateTime)">
            <summary>
            Constructs a generic timestamp object wrapper from an input timestamp object.
            </summary>
            <param name="Timestamp">The timestamp to wrap</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.#ctor(System.String)">
            <summary>
            Parses a string into a datetime object.
            </summary>
            <param name="Time">The time-string to parse</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.#ctor(System.Int64)">
            <summary>
            
            </summary>
            <param name="ticks"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.#ctor(System.Int64,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="ticks"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.#ctor(System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.#ctor(System.Int32,System.Int32,System.Int32,System.Globalization.Calendar)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="calendar"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Globalization.Calendar)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="calendar"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Globalization.Calendar)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
            <param name="calendar"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Globalization.Calendar,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
            <param name="calendar"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.ToString">
            <summary>
            Provids the default-formated string, using the defined default formatting.
            </summary>
            <returns>Formatted datetime-string</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.op_Implicit(Sqlcollaborative.Dbatools.Utility.DbaDate)~System.DateTime">
            <summary>
            Implicitly convert to DateTime
            </summary>
            <param name="Base">The source object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.op_Implicit(System.DateTime)~Sqlcollaborative.Dbatools.Utility.DbaDate">
            <summary>
            Implicitly convert from DateTime
            </summary>
            <param name="Base">The object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.op_Implicit(Sqlcollaborative.Dbatools.Utility.DbaDate)~Sqlcollaborative.Dbatools.Utility.DbaDateTime">
            <summary>
            Implicitly convert to DbaDate
            </summary>
            <param name="Base">The source object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.op_Implicit(Sqlcollaborative.Dbatools.Utility.DbaDate)~Sqlcollaborative.Dbatools.Utility.DbaTime">
            <summary>
            Implicitly convert to DbaTime
            </summary>
            <param name="Base">The source object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.Generate(System.DateTime)">
            <summary>
            Generates a DbaDate object based off DateTime object. Will be null if Base is the start value (Tickes == 0).
            </summary>
            <param name="Base">The Datetime to base it off</param>
            <returns>The object to generate (or null)</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Utility.DbaDateTime">
            <summary>
            A dbatools-internal datetime wrapper for neater display
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.#ctor(System.DateTime)">
            <summary>
            Constructs a generic timestamp object wrapper from an input timestamp object.
            </summary>
            <param name="Timestamp">The timestamp to wrap</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.#ctor(System.String)">
            <summary>
            Parses a string into a datetime object.
            </summary>
            <param name="Time">The time-string to parse</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.#ctor(System.Int64)">
            <summary>
            
            </summary>
            <param name="ticks"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.#ctor(System.Int64,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="ticks"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.#ctor(System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.#ctor(System.Int32,System.Int32,System.Int32,System.Globalization.Calendar)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="calendar"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Globalization.Calendar)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="calendar"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Globalization.Calendar)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
            <param name="calendar"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Globalization.Calendar,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
            <param name="calendar"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.ToString">
            <summary>
            Provids the default-formated string, using the defined default formatting.
            </summary>
            <returns>Formatted datetime-string</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.op_Implicit(Sqlcollaborative.Dbatools.Utility.DbaDateTime)~System.DateTime">
            <summary>
            Implicitly convert to DateTime
            </summary>
            <param name="Base">The source object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.op_Implicit(System.DateTime)~Sqlcollaborative.Dbatools.Utility.DbaDateTime">
            <summary>
            Implicitly convert from DateTime
            </summary>
            <param name="Base">The object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.op_Implicit(Sqlcollaborative.Dbatools.Utility.DbaDateTime)~Sqlcollaborative.Dbatools.Utility.DbaDate">
            <summary>
            Implicitly convert to DbaDate
            </summary>
            <param name="Base">The source object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.op_Implicit(Sqlcollaborative.Dbatools.Utility.DbaDateTime)~Sqlcollaborative.Dbatools.Utility.DbaTime">
            <summary>
            Implicitly convert to DbaTime
            </summary>
            <param name="Base">The source object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.Generate(System.DateTime)">
            <summary>
            Generates a DbaDateTime object based off DateTime object. Will be null if Base is the start value (Tickes == 0).
            </summary>
            <param name="Base">The Datetime to base it off</param>
            <returns>The object to generate (or null)</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase">
            <summary>
            Base class for wrapping around a DateTime object
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase._timestamp">
            <summary>
            The core resource, containing the actual timestamp
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Date">
            <summary>
            Gets the date component of this instance.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Day">
            <summary>
            Gets the day of the month represented by this instance.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.DayOfWeek">
            <summary>
            Gets the day of the week represented by this instance.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.DayOfYear">
            <summary>
            Gets the day of the year represented by this instance.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Hour">
            <summary>
            Gets the hour component of the date represented by this instance.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Kind">
            <summary>
            Gets a value that indicates whether the time represented by this instance is based on local time, Coordinated Universal Time (UTC), or neither.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Millisecond">
            <summary>
            Gets the milliseconds component of the date represented by this instance.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Minute">
            <summary>
            Gets the minute component of the date represented by this instance.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Month">
            <summary>
            Gets the month component of the date represented by this instance.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Second">
            <summary>
            Gets the seconds component of the date represented by this instance.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Ticks">
            <summary>
            Gets the number of ticks that represent the date and time of this instance.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.TimeOfDay">
            <summary>
            Gets the time of day for this instance.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Year">
            <summary>
            Gets the year component of the date represented by this instance.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.#ctor">
            <summary>
            Constructor that should never be called, since this class should never be instantiated. It's there for implicit calls on child classes.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.#ctor(System.DateTime)">
            <summary>
            Constructs a generic timestamp object wrapper from an input timestamp object.
            </summary>
            <param name="Timestamp">The timestamp to wrap</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.#ctor(System.String)">
            <summary>
            Parses a string into a datetime object.
            </summary>
            <param name="Time">The time-string to parse</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.#ctor(System.Int64)">
            <summary>
            
            </summary>
            <param name="ticks"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.#ctor(System.Int64,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="ticks"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.#ctor(System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.#ctor(System.Int32,System.Int32,System.Int32,System.Globalization.Calendar)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="calendar"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Globalization.Calendar)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="calendar"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Globalization.Calendar)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
            <param name="calendar"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Globalization.Calendar,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
            <param name="calendar"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Add(System.TimeSpan)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.AddDays(System.Double)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.AddHours(System.Double)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.AddMilliseconds(System.Double)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.AddMinutes(System.Double)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.AddMonths(System.Int32)">
            <summary>
            
            </summary>
            <param name="months"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.AddSeconds(System.Double)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.AddTicks(System.Int64)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.AddYears(System.Int32)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.CompareTo(System.Object)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.CompareTo(System.DateTime)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Equals(System.Object)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Equals(System.DateTime)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.GetDateTimeFormats">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.GetDateTimeFormats(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="provider"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.GetDateTimeFormats(System.Char)">
            <summary>
            
            </summary>
            <param name="format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.GetDateTimeFormats(System.Char,System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="format"></param>
            <param name="provider"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.GetBaseObject">
            <summary>
            Retrieve base DateTime object, this is a wrapper for
            </summary>
            <returns>Base DateTime object</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.GetHashCode">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.GetTypeCode">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.IsDaylightSavingTime">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Subtract(System.DateTime)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Subtract(System.TimeSpan)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.ToBinary">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.ToFileTime">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.ToFileTimeUtc">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.ToLocalTime">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.ToLongDateString">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.ToLongTimeString">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.ToOADate">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.ToShortDateString">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.ToShortTimeString">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.ToString(System.String)">
            <summary>
            
            </summary>
            <param name="format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.ToString(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="provider"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.ToString(System.String,System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="format"></param>
            <param name="provider"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.ToUniversalTime">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.ParseDateTime(System.String)">
            <summary>
            Parses input string into datetime
            </summary>
            <param name="Value">The string to parse</param>
            <returns>The resultant datetime.</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.op_Addition(Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase,System.TimeSpan)">
            <summary>
            
            </summary>
            <param name="Timestamp"></param>
            <param name="Duration"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.op_Subtraction(Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase,System.TimeSpan)">
            <summary>
            
            </summary>
            <param name="Timestamp"></param>
            <param name="Duration"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.op_Equality(Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase,Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase)">
            <summary>
            
            </summary>
            <param name="Timestamp1"></param>
            <param name="Timestamp2"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.op_Inequality(Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase,Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase)">
            <summary>
            
            </summary>
            <param name="Timestamp1"></param>
            <param name="Timestamp2"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.op_GreaterThan(Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase,Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase)">
            <summary>
            
            </summary>
            <param name="Timestamp1"></param>
            <param name="Timestamp2"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.op_LessThan(Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase,Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase)">
            <summary>
            
            </summary>
            <param name="Timestamp1"></param>
            <param name="Timestamp2"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.op_GreaterThanOrEqual(Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase,Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase)">
            <summary>
            
            </summary>
            <param name="Timestamp1"></param>
            <param name="Timestamp2"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.op_LessThanOrEqual(Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase,Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase)">
            <summary>
            
            </summary>
            <param name="Timestamp1"></param>
            <param name="Timestamp2"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.op_Implicit(Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase)~System.DateTime">
            <summary>
            Implicitly convert DbaDateTimeBase to DateTime
            </summary>
            <param name="Base">The source object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.op_Implicit(System.DateTime)~Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase">
            <summary>
            Implicitly convert DateTime to DbaDateTimeBase
            </summary>
            <param name="Base">The object to convert</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Utility.DbaTime">
            <summary>
            A dbatools-internal datetime wrapper for neater display
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.#ctor(System.DateTime)">
            <summary>
            Constructs a generic timestamp object wrapper from an input timestamp object.
            </summary>
            <param name="Timestamp">The timestamp to wrap</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.#ctor(System.String)">
            <summary>
            Parses a string into a datetime object.
            </summary>
            <param name="Time">The time-string to parse</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.#ctor(System.Int64)">
            <summary>
            
            </summary>
            <param name="ticks"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.#ctor(System.Int64,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="ticks"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.#ctor(System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.#ctor(System.Int32,System.Int32,System.Int32,System.Globalization.Calendar)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="calendar"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Globalization.Calendar)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="calendar"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Globalization.Calendar)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
            <param name="calendar"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Globalization.Calendar,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
            <param name="calendar"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.ToString">
            <summary>
            Provids the default-formated string, using the defined default formatting.
            </summary>
            <returns>Formatted datetime-string</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.op_Implicit(Sqlcollaborative.Dbatools.Utility.DbaTime)~System.DateTime">
            <summary>
            Implicitly convert to DateTime
            </summary>
            <param name="Base">The source object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.op_Implicit(System.DateTime)~Sqlcollaborative.Dbatools.Utility.DbaTime">
            <summary>
            Implicitly convert from DateTime
            </summary>
            <param name="Base">The object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.op_Implicit(Sqlcollaborative.Dbatools.Utility.DbaTime)~Sqlcollaborative.Dbatools.Utility.DbaDate">
            <summary>
            Implicitly convert to DbaDate
            </summary>
            <param name="Base">The source object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.op_Implicit(Sqlcollaborative.Dbatools.Utility.DbaTime)~Sqlcollaborative.Dbatools.Utility.DbaDateTime">
            <summary>
            Implicitly convert to DbaTime
            </summary>
            <param name="Base">The source object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.op_Implicit(Sqlcollaborative.Dbatools.Utility.DbaTime)~System.String">
            <summary>
            Implicitly convert to string
            </summary>
            <param name="Base">Object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.Generate(System.DateTime)">
            <summary>
            Generates a DbaDateTime object based off DateTime object. Will be null if Base is the start value (Tickes == 0).
            </summary>
            <param name="Base">The Datetime to base it off</param>
            <returns>The object to generate (or null)</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan">
            <summary>
            A wrapper class, encapsuling a regular TimeSpan object. Used to provide custom timespan display.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.Days">
            <summary>
            Gets the days component of the time interval represented by the current TimeSpan structure.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.Hours">
            <summary>
            Gets the hours component of the time interval represented by the current TimeSpan structure.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.Milliseconds">
            <summary>
            Gets the milliseconds component of the time interval represented by the current TimeSpan structure.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.Minutes">
            <summary>
            Gets the minutes component of the time interval represented by the current TimeSpan structure.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.Seconds">
            <summary>
            Gets the seconds component of the time interval represented by the current TimeSpan structure.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.Ticks">
            <summary>
            Gets the number of ticks that represent the value of the current TimeSpan structure.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.TotalDays">
            <summary>
            Gets the value of the current TimeSpan structure expressed in whole and fractional days.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.TotalHours">
            <summary>
            Gets the value of the current TimeSpan structure expressed in whole and fractional hours.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.TotalMilliseconds">
            <summary>
            Gets the value of the current TimeSpan structure expressed in whole and fractional milliseconds.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.TotalMinutes">
            <summary>
            Gets the value of the current TimeSpan structure expressed in whole and fractional minutes.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.TotalSeconds">
            <summary>
            Gets the value of the current TimeSpan structure expressed in whole and fractional seconds.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.#ctor(System.TimeSpan)">
            <summary>
            
            </summary>
            <param name="Timespan"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.#ctor(System.String)">
            <summary>
            Converts a string into a timespan
            </summary>
            <param name="Timespan">The string to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.#ctor(System.Int64)">
            <summary>
            
            </summary>
            <param name="ticks"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.#ctor(System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="hours"></param>
            <param name="minutes"></param>
            <param name="seconds"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.#ctor(System.Int32,System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="days"></param>
            <param name="hours"></param>
            <param name="minutes"></param>
            <param name="seconds"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="days"></param>
            <param name="hours"></param>
            <param name="minutes"></param>
            <param name="seconds"></param>
            <param name="milliseconds"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.ParseTimeSpan(System.String)">
            <summary>
            Parses an input string as timespan
            </summary>
            <param name="Value">The string to interpret</param>
            <returns>The interpreted timespan value</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.Add(System.TimeSpan)">
            <summary>
            
            </summary>
            <param name="ts"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.CompareTo(System.Object)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.CompareTo(System.TimeSpan)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.CompareTo(Sqlcollaborative.Dbatools.Utility.DbaTimeSpan)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.Duration">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.Equals(System.Object)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.Equals(System.TimeSpan)">
            <summary>
            
            </summary>
            <param name="obj"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.GetBaseObject">
            <summary>
            Returns the wrapped base object
            </summary>
            <returns>The base object</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.GetHashCode">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.Negate">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.Subtract(System.TimeSpan)">
            <summary>
            
            </summary>
            <param name="ts"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.ToString">
            <summary>
            Returns the default string representation of the TimeSpan object
            </summary>
            <returns>The string representation of the DbaTimeSpan object</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.ToString(System.String)">
            <summary>
            
            </summary>
            <param name="format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.ToString(System.String,System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="format"></param>
            <param name="formatProvider"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.op_Implicit(Sqlcollaborative.Dbatools.Utility.DbaTimeSpan)~System.TimeSpan">
            <summary>
            Implicitly converts a DbaTimeSpan object into a TimeSpan object
            </summary>
            <param name="Base">The original object to revert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.op_Implicit(System.TimeSpan)~Sqlcollaborative.Dbatools.Utility.DbaTimeSpan">
            <summary>
            Implicitly converts a TimeSpan object into a DbaTimeSpan object
            </summary>
            <param name="Base">The original object to wrap</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Utility.DbaTimeSpanPretty">
            <summary>
            Makes timespan great again
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpanPretty.FromMilliseconds(System.Double)">
            <summary>
            Creates a new, pretty timespan object from milliseconds
            </summary>
            <param name="Milliseconds">The milliseconds to convert from.</param>
            <returns>A pretty timespan object</returns>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.DbaTimeSpanPretty.Digits">
            <summary>
            The number of digits a pretty timespan should round to.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpanPretty.#ctor(System.TimeSpan)">
            <summary>
            
            </summary>
            <param name="Timespan"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpanPretty.#ctor(System.String)">
            <summary>
            Converts a string into a timespan
            </summary>
            <param name="Timespan">The string to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpanPretty.#ctor(System.Int64)">
            <summary>
            
            </summary>
            <param name="ticks"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpanPretty.#ctor(System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="hours"></param>
            <param name="minutes"></param>
            <param name="seconds"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpanPretty.#ctor(System.Int32,System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="days"></param>
            <param name="hours"></param>
            <param name="minutes"></param>
            <param name="seconds"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpanPretty.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="days"></param>
            <param name="hours"></param>
            <param name="minutes"></param>
            <param name="seconds"></param>
            <param name="milliseconds"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpanPretty.ToString">
            <summary>
            Creates extra-nice timespan formats
            </summary>
            <returns>Humanly readable timespans</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Utility.DbaValidatePatternAttribute">
            <summary>
            Validates that each parameter argument matches the RegexPattern
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaValidatePatternAttribute.RegexPattern">
            <summary>
            Gets the Regex pattern to be used in the validation
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaValidatePatternAttribute.Options">
            <summary>
            Gets or sets the Regex options to be used in the validation
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaValidatePatternAttribute.ErrorMessage">
             <summary>
             Gets or sets the custom error message pattern that is displayed to the user.
            
             The text representation of the object being validated and the validating regex is passed as
             the first and second formatting parameters to the ErrorMessage formatting pattern.
             <example>
             [ValidatePattern("\s+", ErrorMessage="The text '{0}' did not pass validation of regex '{1}'")]
             </example>
             </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaValidatePatternAttribute.ValidateElement(System.Object)">
            <summary>
            Validates that each parameter argument matches the RegexPattern
            </summary>
            <param name="element">object to validate</param>
            <exception cref="T:System.Management.Automation.ValidationMetadataException">if <paramref name="element"/> is not a string
             that matches the pattern
             and for invalid arguments</exception>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaValidatePatternAttribute.#ctor(System.String)">
            <summary>
            Initializes a new instance of the PsfValidatePatternAttribute class
            </summary>
            <param name="regexPattern">Pattern string to match</param>
            <exception cref="T:System.ArgumentException">for invalid arguments</exception>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Utility.DbaValidateScriptAttribute">
            <summary>
            Class for validating against a script block.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaValidateScriptAttribute.ErrorMessage">
             <summary>
             Gets or sets the custom error message that is displayed to the user.
            
             The item being validated and the validating scriptblock is passed as the first and second
             formatting argument.
            
             <example>
             [ValidateScript("$_ % 2", ErrorMessage = "The item '{0}' did not pass validation of script '{1}'")]
             </example>
             </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaValidateScriptAttribute.ScriptBlock">
            <summary>
            Gets the scriptblock to be used in the validation
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaValidateScriptAttribute.ValidateElement(System.Object)">
            <summary>
            Validates that each parameter argument matches the scriptblock
            </summary>
            <param name="element">object to validate</param>
            <exception cref="T:System.Management.Automation.ValidationMetadataException">if <paramref name="element"/> is invalid</exception>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaValidateScriptAttribute.#ctor(System.Management.Automation.ScriptBlock)">
            <summary>
            Initializes a new instance of the ValidateScriptBlockAttribute class
            </summary>
            <param name="scriptBlock">Scriptblock to match</param>
            <exception cref="T:System.ArgumentException">for invalid arguments</exception>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Utility.RegexHelper">
            <summary>
            Static class that holds useful regex patterns, ready for use
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.HostName">
            <summary>
            Pattern that checks for a valid hostname
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.HostNameEx">
            <summary>
            Pattern that checks for valid hostnames within a larger text
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.IPv4">
            <summary>
            Pattern that checks for a valid IPv4 address
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.IPv4Ex">
            <summary>
            Pattern that checks for valid IPv4 addresses within a larger text
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.IPv6">
            <summary>
            Will match a valid IPv6 address
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.IPv6Ex">
            <summary>
            Will match any IPv6 address within a larger text
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.ComputerTarget">
            <summary>
            Will match any string that in its entirety represents a valid target for dns- or ip-based targeting. Combination of HostName, IPv4 and IPv6
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.Guid">
            <summary>
            Will match a valid Guid
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.GuidEx">
            <summary>
            Will match any number of valid Guids in a larger text
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.InstanceName">
            <summary>
            Will match a mostly valid instance name.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.InstanceNameEx">
            <summary>
            Will match any instance of a mostly valid instance name.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.SqlReservedKeyword">
            <summary>
            Matches a word against the list of officially reserved keywords
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.SqlReservedKeywordEx">
            <summary>
            Will match any reserved keyword in a larger text
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.SqlReservedKeywordOdbc">
            <summary>
            Matches a word against the list of officially reserved keywords for odbc
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.SqlReservedKeywordOdbcEx">
            <summary>
            Will match any reserved odbc-keyword in a larger text
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.SqlReservedKeywordFuture">
            <summary>
            Matches a word against the list of keywords that are likely to become reserved in the future
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.SqlReservedKeywordFutureEx">
            <summary>
            Will match against the list of keywords that are likely to become reserved in the future and are used in a larger text
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Utility.Size">
            <summary>
            Class that reports File size.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.Size.Byte">
            <summary>
            Number of bytes contained in whatever object uses this object as a property
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.Size.Kilobyte">
            <summary>
            Kilobyte representation of the bytes
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.Size.Megabyte">
            <summary>
            Megabyte representation of the bytes
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.Size.Gigabyte">
            <summary>
            Gigabyte representation of the bytes
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.Size.Terabyte">
            <summary>
            Terabyte representation of the bytes
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.Size.Digits">
            <summary>
            Number if digits behind the dot.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.Size.Style">
            <summary>
            How the size object should be displayed.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.ToString">
            <summary>
            Shows the default string representation of size
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.Equals(System.Object)">
            <summary>
            Simple equality test
            </summary>
            <param name="obj">The object to test it against</param>
            <returns>True if equal, false elsewise</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.GetHashCode">
            <inheritdoc cref="M:System.Int64.GetHashCode"/>
            <remarks>The hashcode of the underlying size</remarks>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.#ctor">
            <summary>
            Creates an empty size.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.#ctor(System.Int64)">
            <summary>
            Creates a size with some content
            </summary>
            <param name="Byte">The length in bytes to set the size to</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.CompareTo(Sqlcollaborative.Dbatools.Utility.Size)">
            <inheritdoc cref="M:System.IComparable`1.CompareTo(`0)"/>
            <remarks>For sorting</remarks>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.CompareTo(System.Object)">
            <inheritdoc cref="M:System.IComparable.CompareTo(System.Object)"/>
            <remarks>For sorting</remarks>
            <exception cref="T:System.ArgumentException">If you compare with something invalid.</exception>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.op_Addition(Sqlcollaborative.Dbatools.Utility.Size,Sqlcollaborative.Dbatools.Utility.Size)">
            <summary>
            Adds two sizes
            </summary>
            <param name="a">The first size to add</param>
            <param name="b">The second size to add</param>
            <returns>The sum of both sizes</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.op_Subtraction(Sqlcollaborative.Dbatools.Utility.Size,Sqlcollaborative.Dbatools.Utility.Size)">
            <summary>
            Substracts two sizes
            </summary>
            <param name="a">The first size to substract</param>
            <param name="b">The second size to substract</param>
            <returns>The difference between both sizes</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.op_Multiply(Sqlcollaborative.Dbatools.Utility.Size,System.Double)">
            <summary>
            Multiplies two sizes with each other
            </summary>
            <param name="a">The size to multiply</param>
            <param name="b">The size to multiply with</param>
            <returns>A multiplied size.</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.op_Division(Sqlcollaborative.Dbatools.Utility.Size,System.Double)">
            <summary>
            Divides one size by another. 
            </summary>
            <param name="a">The size to divide</param>
            <param name="b">The size to divide with</param>
            <returns>Divided size (note: Cut off)</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.op_Multiply(Sqlcollaborative.Dbatools.Utility.Size,Sqlcollaborative.Dbatools.Utility.Size)">
            <summary>
            Multiplies two sizes with each other
            </summary>
            <param name="a">The size to multiply</param>
            <param name="b">The size to multiply with</param>
            <returns>A multiplied size.</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.op_Division(Sqlcollaborative.Dbatools.Utility.Size,Sqlcollaborative.Dbatools.Utility.Size)">
            <summary>
            Divides one size by another.
            </summary>
            <param name="a">The size to divide</param>
            <param name="b">The size to divide with</param>
            <returns>Divided size (note: Cut off)</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.op_Implicit(System.Int32)~Sqlcollaborative.Dbatools.Utility.Size">
            <summary>
            Implicitly converts int to size
            </summary>
            <param name="a">The number to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.op_Implicit(System.Decimal)~Sqlcollaborative.Dbatools.Utility.Size">
            <summary>
            Implicitly converts int to size
            </summary>
            <param name="a">The number to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.op_Implicit(Sqlcollaborative.Dbatools.Utility.Size)~System.Int32">
            <summary>
            Implicitly converts size to int
            </summary>
            <param name="a">The size to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.op_Implicit(System.Int64)~Sqlcollaborative.Dbatools.Utility.Size">
            <summary>
            Implicitly converts long to size
            </summary>
            <param name="a">The number to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.op_Implicit(Sqlcollaborative.Dbatools.Utility.Size)~System.Int64">
            <summary>
            Implicitly converts size to long
            </summary>
            <param name="a">The size to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.op_Implicit(System.String)~Sqlcollaborative.Dbatools.Utility.Size">
            <summary>
            Implicitly converts string to size
            </summary>
            <param name="a">The string to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.op_Implicit(System.Double)~Sqlcollaborative.Dbatools.Utility.Size">
            <summary>
            Implicitly converts double to size
            </summary>
            <param name="a">The number to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.op_Implicit(Sqlcollaborative.Dbatools.Utility.Size)~System.Double">
            <summary>
            Implicitly converts size to double
            </summary>
            <param name="a">The size to convert</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Utility.SizeStyle">
            <summary>
            How size objects should be displayed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.SizeStyle.Dynamic">
            <summary>
            The size object is styled dependend on the number stored within.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.SizeStyle.Plain">
            <summary>
            The size object is shown as a plain number
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.SizeStyle.Byte">
            <summary>
            The size object is styled as a byte number
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.SizeStyle.Kilobyte">
            <summary>
            The size object is styled as a kilobyte number
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.SizeStyle.Megabyte">
            <summary>
            The size object is styled as a megabyte number
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.SizeStyle.Gigabyte">
            <summary>
            The size object is styled as a Gigabyte number
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.SizeStyle.Terabyte">
            <summary>
            The size object is styled as a Terabyte number
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Utility.UtilityHost">
            <summary>
            Provides static resources to utility-namespaced stuff
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.UtilityHost.DisableCustomDateTime">
            <summary>
            Restores all DateTime objects to their default display behavior
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.UtilityHost.DisableCustomTimeSpan">
            <summary>
            Restores all timespan objects to their default display behavior.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.UtilityHost.FormatDate">
            <summary>
            Formating string for date-style datetime objects.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.UtilityHost.FormatDateTime">
            <summary>
            Formating string for datetime-style datetime objects
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.UtilityHost.FormatTime">
            <summary>
            Formating string for time-style datetime objects
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.UtilityHost.SizeDigits">
            <summary>
            The number of digits a size object shows by default
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.UtilityHost.SizeStyle">
            <summary>
            The way size objects are usually displayed
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.UtilityHost.IsLike(System.String,System.String,System.Boolean)">
            <summary>
            Implement's VB's Like operator logic.
            </summary>
            <param name="CaseSensitive">Whether the comparison is case sensitive</param>
            <param name="Pattern">The pattern the string is compared with</param>
            <param name="String">The string that is being compared with a pattern</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.UtilityHost.CompressString(System.String)">
            <summary>
            Compress string using default zip algorithms
            </summary>
            <param name="String">The string to compress</param>
            <returns>Returns a compressed string.</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.UtilityHost.ExpandString(System.String)">
            <summary>
            Expand a string using default zig algorithms
            </summary>
            <param name="CompressedString">The compressed string to expand</param>
            <returns>Returns an expanded string.</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.UtilityHost.CharListToSet(System.String)">
            <summary>
            Converts a string of characters to a HashSet of characters. If the string
            contains character ranges, such as A-Z, all characters in the range are
            also added to the returned set of characters.
            </summary>
            <param name="charList">Character list string</param>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.UtilityHost.Callstack">
            <summary>
            Returns the current callstack
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.UtilityHost._CallstackNew">
            <summary>
            Returns the current callstack on PS4+
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.UtilityHost._CallstackOld">
            <summary>
            Returns the current callstack on PS3
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Utility.Validation">
            <summary>
            Provides helper methods that aid in validating stuff.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Validation.IsLocalhost(System.String)">
            <summary>
            Tests whether a given string is the local host.
            Does NOT use DNS resolution, DNS aliases will NOT be recognized!
            </summary>
            <param name="Name">The name to test for being local host</param>
            <returns>Whether the name is localhost</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Validation.IsRecommendedInstanceName(System.String)">
            <summary>
            Tests whether a given string is a recommended instance name. Recommended names musst be legal, nbot on the ODBC list and not on the list of words likely to become reserved keywords in the future.
            </summary>
            <param name="InstanceName">The name to test. MAY contain server name, but will NOT test the server.</param>
            <returns>Whether the name is recommended</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Validation.IsValidComputerTarget(System.String)">
            <summary>
            Tests whether a given string is a valid target for targeting as a computer. Will first convert from idn name.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Validation.IsValidInstanceName(System.String,System.Boolean)">
            <summary>
            Tests whether a given string is a valid instance name.
            </summary>
            <param name="InstanceName">The name to test. MAY contain server name, but will NOT test the server.</param>
            <param name="Lenient">Setting this to true will make the validation ignore default and mssqlserver as illegal names (as they are illegal names for named instances, but legal for targeting)</param>
            <returns>Whether the name is legal</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Validation.LinkedServerResult">
            <summary>
            The results of testing linked server connectivity as seen from the server that was linked to.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Validation.LinkedServerResult.ComputerName">
            <summary>
            The name of the server running the tests
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Validation.LinkedServerResult.InstanceName">
            <summary>
            The name of the instance running the tests
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Validation.LinkedServerResult.SqlInstance">
            <summary>
            The full name of the instance running the tests
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Validation.LinkedServerResult.LinkedServerName">
            <summary>
            The name of the linked server, the connectivity with whom was tested
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Validation.LinkedServerResult.RemoteServer">
            <summary>
            The name of the remote computer running the linked server.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Validation.LinkedServerResult.Connectivity">
            <summary>
            The test result
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Validation.LinkedServerResult.Result">
            <summary>
            Text interpretation of the result. Contains error messages if the test failed.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Validation.LinkedServerResult.#ctor">
            <summary>
            Creates an empty object
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Validation.LinkedServerResult.#ctor(System.String,System.String,System.String,System.String,System.String,System.Boolean,System.String)">
            <summary>
            Creates a test result with prefilled values
            </summary>
            <param name="ComputerName">The name of the server running the tests</param>
            <param name="InstanceName">The name of the instance running the tests</param>
            <param name="SqlInstance">The full name of the instance running the tests</param>
            <param name="LinkedServerName">The name of the linked server, the connectivity with whom was tested</param>
            <param name="RemoteServer">The name of the remote computer running the linked server.</param>
            <param name="Connectivity">The test result</param>
            <param name="Result">Text interpretation of the result. Contains error messages if the test failed.</param>
        </member>
    </members>
</doc>

tools\dbatools\bin\netcoreapp2.1\dbatools.deps.json

{
  "runtimeTarget": {
    "name": ".NETCoreApp,Version=v2.1",
    "signature": "347fd959ec2fbdfda746c5752ff67a028ceedef4"
  },
  "compilationOptions": {},
  "targets": {
    ".NETCoreApp,Version=v2.1": {
      "dbatools/1.0.0": {
        "dependencies": {
          "Microsoft.Management.Infrastructure": "1.0.0",
          "System.Data.SqlClient": "4.5.1"
        },
        "runtime": {
          "dbatools.dll": {}
        }
      },
      "Microsoft.Management.Infrastructure/1.0.0": {
        "dependencies": {
          "System.Runtime.CompilerServices.VisualC": "4.3.0",
          "System.Runtime.Serialization.Xml": "4.3.0",
          "System.Security.SecureString": "4.3.0",
          "System.Threading.ThreadPool": "4.3.0"
        },
        "runtimeTargets": {
          "runtimes/unix/lib/netstandard1.6/Microsoft.Management.Infrastructure.Native.dll": {
            "rid": "unix",
            "assetType": "runtime",
            "assemblyVersion": "1.0.0.0",
            "fileVersion": "1.0.0.0"
          },
          "runtimes/unix/lib/netstandard1.6/Microsoft.Management.Infrastructure.dll": {
            "rid": "unix",
            "assetType": "runtime",
            "assemblyVersion": "1.0.0.0",
            "fileVersion": "10.0.10011.16384"
          },
          "runtimes/win-arm/lib/netstandard1.6/Microsoft.Management.Infrastructure.Native.dll": {
            "rid": "win-arm",
            "assetType": "runtime",
            "assemblyVersion": "1.0.0.0",
            "fileVersion": "10.0.16299.15"
          },
          "runtimes/win-arm/lib/netstandard1.6/Microsoft.Management.Infrastructure.dll": {
            "rid": "win-arm",
            "assetType": "runtime",
            "assemblyVersion": "1.0.0.0",
            "fileVersion": "10.0.16299.15"
          },
          "runtimes/win-arm64/lib/netstandard1.6/Microsoft.Management.Infrastructure.Native.dll": {
            "rid": "win-arm64",
            "assetType": "runtime",
            "assemblyVersion": "1.0.0.0",
            "fileVersion": "10.0.16299.15"
          },
          "runtimes/win-arm64/lib/netstandard1.6/Microsoft.Management.Infrastructure.dll": {
            "rid": "win-arm64",
            "assetType": "runtime",
            "assemblyVersion": "1.0.0.0",
            "fileVersion": "10.0.16299.15"
          },
          "runtimes/win10-x64/lib/netstandard1.6/Microsoft.Management.Infrastructure.Native.dll": {
            "rid": "win10-x64",
            "assetType": "runtime",
            "assemblyVersion": "1.0.0.0",
            "fileVersion": "10.0.16299.15"
          },
          "runtimes/win10-x64/lib/netstandard1.6/Microsoft.Management.Infrastructure.dll": {
            "rid": "win10-x64",
            "assetType": "runtime",
            "assemblyVersion": "1.0.0.0",
            "fileVersion": "10.0.16299.15"
          },
          "runtimes/win10-x86/lib/netstandard1.6/Microsoft.Management.Infrastructure.Native.dll": {
            "rid": "win10-x86",
            "assetType": "runtime",
            "assemblyVersion": "1.0.0.0",
            "fileVersion": "10.0.16299.15"
          },
          "runtimes/win10-x86/lib/netstandard1.6/Microsoft.Management.Infrastructure.dll": {
            "rid": "win10-x86",
            "assetType": "runtime",
            "assemblyVersion": "1.0.0.0",
            "fileVersion": "10.0.16299.15"
          },
          "runtimes/win7-x64/lib/netstandard1.6/Microsoft.Management.Infrastructure.Native.dll": {
            "rid": "win7-x64",
            "assetType": "runtime",
            "assemblyVersion": "1.0.0.0",
            "fileVersion": "10.0.16299.15"
          },
          "runtimes/win7-x64/lib/netstandard1.6/Microsoft.Management.Infrastructure.dll": {
            "rid": "win7-x64",
            "assetType": "runtime",
            "assemblyVersion": "1.0.0.0",
            "fileVersion": "10.0.16299.15"
          },
          "runtimes/win7-x86/lib/netstandard1.6/Microsoft.Management.Infrastructure.Native.dll": {
            "rid": "win7-x86",
            "assetType": "runtime",
            "assemblyVersion": "1.0.0.0",
            "fileVersion": "10.0.16299.15"
          },
          "runtimes/win7-x86/lib/netstandard1.6/Microsoft.Management.Infrastructure.dll": {
            "rid": "win7-x86",
            "assetType": "runtime",
            "assemblyVersion": "1.0.0.0",
            "fileVersion": "10.0.16299.15"
          },
          "runtimes/win8-x64/lib/netstandard1.6/Microsoft.Management.Infrastructure.Native.dll": {
            "rid": "win8-x64",
            "assetType": "runtime",
            "assemblyVersion": "1.0.0.0",
            "fileVersion": "10.0.16299.15"
          },
          "runtimes/win8-x64/lib/netstandard1.6/Microsoft.Management.Infrastructure.dll": {
            "rid": "win8-x64",
            "assetType": "runtime",
            "assemblyVersion": "1.0.0.0",
            "fileVersion": "10.0.16299.15"
          },
          "runtimes/win8-x86/lib/netstandard1.6/Microsoft.Management.Infrastructure.Native.dll": {
            "rid": "win8-x86",
            "assetType": "runtime",
            "assemblyVersion": "1.0.0.0",
            "fileVersion": "10.0.16299.15"
          },
          "runtimes/win8-x86/lib/netstandard1.6/Microsoft.Management.Infrastructure.dll": {
            "rid": "win8-x86",
            "assetType": "runtime",
            "assemblyVersion": "1.0.0.0",
            "fileVersion": "10.0.16299.15"
          },
          "runtimes/win81-x64/lib/netstandard1.6/Microsoft.Management.Infrastructure.Native.dll": {
            "rid": "win81-x64",
            "assetType": "runtime",
            "assemblyVersion": "1.0.0.0",
            "fileVersion": "10.0.16299.15"
          },
          "runtimes/win81-x64/lib/netstandard1.6/Microsoft.Management.Infrastructure.dll": {
            "rid": "win81-x64",
            "assetType": "runtime",
            "assemblyVersion": "1.0.0.0",
            "fileVersion": "10.0.16299.15"
          },
          "runtimes/win81-x86/lib/netstandard1.6/Microsoft.Management.Infrastructure.Native.dll": {
            "rid": "win81-x86",
            "assetType": "runtime",
            "assemblyVersion": "1.0.0.0",
            "fileVersion": "10.0.16299.15"
          },
          "runtimes/win81-x86/lib/netstandard1.6/Microsoft.Management.Infrastructure.dll": {
            "rid": "win81-x86",
            "assetType": "runtime",
            "assemblyVersion": "1.0.0.0",
            "fileVersion": "10.0.16299.15"
          },
          "runtimes/win-arm/native/Microsoft.Management.Infrastructure.Native.Unmanaged.dll": {
            "rid": "win-arm",
            "assetType": "native",
            "fileVersion": "10.0.16299.15"
          },
          "runtimes/win-arm/native/mi.dll": {
            "rid": "win-arm",
            "assetType": "native",
            "fileVersion": "10.0.16299.15"
          },
          "runtimes/win-arm/native/miutils.dll": {
            "rid": "win-arm",
            "assetType": "native",
            "fileVersion": "10.0.16299.15"
          },
          "runtimes/win-arm64/native/Microsoft.Management.Infrastructure.Native.Unmanaged.dll": {
            "rid": "win-arm64",
            "assetType": "native",
            "fileVersion": "10.0.16299.15"
          },
          "runtimes/win-arm64/native/mi.dll": {
            "rid": "win-arm64",
            "assetType": "native",
            "fileVersion": "10.0.16299.15"
          },
          "runtimes/win-arm64/native/miutils.dll": {
            "rid": "win-arm64",
            "assetType": "native",
            "fileVersion": "10.0.16299.15"
          },
          "runtimes/win10-x64/native/Microsoft.Management.Infrastructure.Native.Unmanaged.dll": {
            "rid": "win10-x64",
            "assetType": "native",
            "fileVersion": "10.0.14886.1000"
          },
          "runtimes/win10-x64/native/mi.dll": {
            "rid": "win10-x64",
            "assetType": "native",
            "fileVersion": "10.0.14886.1000"
          },
          "runtimes/win10-x64/native/miutils.dll": {
            "rid": "win10-x64",
            "assetType": "native",
            "fileVersion": "10.0.14886.1000"
          },
          "runtimes/win10-x86/native/Microsoft.Management.Infrastructure.Native.Unmanaged.dll": {
            "rid": "win10-x86",
            "assetType": "native",
            "fileVersion": "10.0.14394.1000"
          },
          "runtimes/win10-x86/native/mi.dll": {
            "rid": "win10-x86",
            "assetType": "native",
            "fileVersion": "10.0.14394.1000"
          },
          "runtimes/win10-x86/native/miutils.dll": {
            "rid": "win10-x86",
            "assetType": "native",
            "fileVersion": "10.0.14394.1000"
          },
          "runtimes/win7-x64/native/Microsoft.Management.Infrastructure.Native.Unmanaged.dll": {
            "rid": "win7-x64",
            "assetType": "native",
            "fileVersion": "10.0.14394.1000"
          },
          "runtimes/win7-x64/native/mi.dll": {
            "rid": "win7-x64",
            "assetType": "native",
            "fileVersion": "10.0.14394.1000"
          },
          "runtimes/win7-x64/native/miutils.dll": {
            "rid": "win7-x64",
            "assetType": "native",
            "fileVersion": "10.0.14394.1000"
          },
          "runtimes/win7-x86/native/Microsoft.Management.Infrastructure.Native.Unmanaged.dll": {
            "rid": "win7-x86",
            "assetType": "native",
            "fileVersion": "10.0.14394.1000"
          },
          "runtimes/win7-x86/native/mi.dll": {
            "rid": "win7-x86",
            "assetType": "native",
            "fileVersion": "10.0.14394.1000"
          },
          "runtimes/win7-x86/native/miutils.dll": {
            "rid": "win7-x86",
            "assetType": "native",
            "fileVersion": "10.0.14394.1000"
          },
          "runtimes/win8-x64/native/Microsoft.Management.Infrastructure.Native.Unmanaged.dll": {
            "rid": "win8-x64",
            "assetType": "native",
            "fileVersion": "10.0.14394.1000"
          },
          "runtimes/win8-x64/native/mi.dll": {
            "rid": "win8-x64",
            "assetType": "native",
            "fileVersion": "10.0.14394.1000"
          },
          "runtimes/win8-x64/native/miutils.dll": {
            "rid": "win8-x64",
            "assetType": "native",
            "fileVersion": "10.0.14394.1000"
          },
          "runtimes/win8-x86/native/Microsoft.Management.Infrastructure.Native.Unmanaged.dll": {
            "rid": "win8-x86",
            "assetType": "native",
            "fileVersion": "10.0.14394.1000"
          },
          "runtimes/win8-x86/native/mi.dll": {
            "rid": "win8-x86",
            "assetType": "native",
            "fileVersion": "10.0.14394.1000"
          },
          "runtimes/win8-x86/native/miutils.dll": {
            "rid": "win8-x86",
            "assetType": "native",
            "fileVersion": "10.0.14394.1000"
          },
          "runtimes/win81-x64/native/Microsoft.Management.Infrastructure.Native.Unmanaged.dll": {
            "rid": "win81-x64",
            "assetType": "native",
            "fileVersion": "10.0.14394.1000"
          },
          "runtimes/win81-x64/native/mi.dll": {
            "rid": "win81-x64",
            "assetType": "native",
            "fileVersion": "10.0.14394.1000"
          },
          "runtimes/win81-x64/native/miutils.dll": {
            "rid": "win81-x64",
            "assetType": "native",
            "fileVersion": "10.0.14394.1000"
          },
          "runtimes/win81-x86/native/Microsoft.Management.Infrastructure.Native.Unmanaged.dll": {
            "rid": "win81-x86",
            "assetType": "native",
            "fileVersion": "10.0.14394.1000"
          },
          "runtimes/win81-x86/native/mi.dll": {
            "rid": "win81-x86",
            "assetType": "native",
            "fileVersion": "10.0.14394.1000"
          },
          "runtimes/win81-x86/native/miutils.dll": {
            "rid": "win81-x86",
            "assetType": "native",
            "fileVersion": "10.0.14394.1000"
          }
        }
      },
      "Microsoft.Win32.Registry/4.5.0": {
        "dependencies": {
          "System.Security.AccessControl": "4.5.0",
          "System.Security.Principal.Windows": "4.5.0"
        },
        "runtimeTargets": {
          "runtime/unix/lib/_._": {
            "rid": "unix",
            "assetType": "runtime"
          },
          "runtime/win/lib/_._": {
            "rid": "win",
            "assetType": "runtime"
          }
        }
      },
      "runtime.native.System.Data.SqlClient.sni/4.4.0": {
        "dependencies": {
          "runtime.win-arm64.runtime.native.System.Data.SqlClient.sni": "4.4.0",
          "runtime.win-x64.runtime.native.System.Data.SqlClient.sni": "4.4.0",
          "runtime.win-x86.runtime.native.System.Data.SqlClient.sni": "4.4.0"
        }
      },
      "runtime.win-arm64.runtime.native.System.Data.SqlClient.sni/4.4.0": {
        "runtimeTargets": {
          "runtimes/win-arm64/native/sni.dll": {
            "rid": "win-arm64",
            "assetType": "native",
            "fileVersion": "4.6.25512.1"
          }
        }
      },
      "runtime.win-x64.runtime.native.System.Data.SqlClient.sni/4.4.0": {
        "runtimeTargets": {
          "runtimes/win-x64/native/sni.dll": {
            "rid": "win-x64",
            "assetType": "native",
            "fileVersion": "4.6.25512.1"
          }
        }
      },
      "runtime.win-x86.runtime.native.System.Data.SqlClient.sni/4.4.0": {
        "runtimeTargets": {
          "runtimes/win-x86/native/sni.dll": {
            "rid": "win-x86",
            "assetType": "native",
            "fileVersion": "4.6.25512.1"
          }
        }
      },
      "System.Collections/4.3.0": {
        "dependencies": {
          "System.Runtime": "4.3.0"
        }
      },
      "System.Collections.Concurrent/4.3.0": {
        "dependencies": {
          "System.Collections": "4.3.0",
          "System.Diagnostics.Debug": "4.3.0",
          "System.Diagnostics.Tracing": "4.3.0",
          "System.Globalization": "4.3.0",
          "System.Reflection": "4.3.0",
          "System.Resources.ResourceManager": "4.3.0",
          "System.Runtime": "4.3.0",
          "System.Runtime.Extensions": "4.3.0",
          "System.Threading": "4.3.0",
          "System.Threading.Tasks": "4.3.0"
        }
      },
      "System.Data.SqlClient/4.5.1": {
        "dependencies": {
          "Microsoft.Win32.Registry": "4.5.0",
          "System.Security.Principal.Windows": "4.5.0",
          "System.Text.Encoding.CodePages": "4.5.0",
          "runtime.native.System.Data.SqlClient.sni": "4.4.0"
        },
        "runtime": {
          "lib/netcoreapp2.1/System.Data.SqlClient.dll": {
            "assemblyVersion": "4.4.0.0",
            "fileVersion": "4.6.26606.5"
          }
        },
        "runtimeTargets": {
          "runtimes/unix/lib/netcoreapp2.1/System.Data.SqlClient.dll": {
            "rid": "unix",
            "assetType": "runtime",
            "assemblyVersion": "4.4.0.0",
            "fileVersion": "4.6.26606.5"
          },
          "runtimes/win/lib/netcoreapp2.1/System.Data.SqlClient.dll": {
            "rid": "win",
            "assetType": "runtime",
            "assemblyVersion": "4.4.0.0",
            "fileVersion": "4.6.26606.5"
          }
        }
      },
      "System.Diagnostics.Debug/4.3.0": {
        "dependencies": {
          "System.Runtime": "4.3.0"
        }
      },
      "System.Diagnostics.Tools/4.3.0": {
        "dependencies": {
          "System.Runtime": "4.3.0"
        }
      },
      "System.Diagnostics.Tracing/4.3.0": {
        "dependencies": {
          "System.Runtime": "4.3.0"
        }
      },
      "System.Globalization/4.3.0": {
        "dependencies": {
          "System.Runtime": "4.3.0"
        }
      },
      "System.IO/4.3.0": {
        "dependencies": {
          "System.Runtime": "4.3.0",
          "System.Text.Encoding": "4.3.0",
          "System.Threading.Tasks": "4.3.0"
        }
      },
      "System.IO.FileSystem/4.3.0": {
        "dependencies": {
          "System.IO": "4.3.0",
          "System.IO.FileSystem.Primitives": "4.3.0",
          "System.Runtime": "4.3.0",
          "System.Runtime.Handles": "4.3.0",
          "System.Text.Encoding": "4.3.0",
          "System.Threading.Tasks": "4.3.0"
        }
      },
      "System.IO.FileSystem.Primitives/4.3.0": {
        "dependencies": {
          "System.Runtime": "4.3.0"
        }
      },
      "System.Linq/4.3.0": {
        "dependencies": {
          "System.Collections": "4.3.0",
          "System.Diagnostics.Debug": "4.3.0",
          "System.Resources.ResourceManager": "4.3.0",
          "System.Runtime": "4.3.0",
          "System.Runtime.Extensions": "4.3.0"
        }
      },
      "System.Private.DataContractSerialization/4.3.0": {
        "dependencies": {
          "System.Collections": "4.3.0",
          "System.Collections.Concurrent": "4.3.0",
          "System.Diagnostics.Debug": "4.3.0",
          "System.Globalization": "4.3.0",
          "System.IO": "4.3.0",
          "System.Linq": "4.3.0",
          "System.Reflection": "4.3.0",
          "System.Reflection.Emit.ILGeneration": "4.3.0",
          "System.Reflection.Emit.Lightweight": "4.3.0",
          "System.Reflection.Extensions": "4.3.0",
          "System.Reflection.Primitives": "4.3.0",
          "System.Reflection.TypeExtensions": "4.3.0",
          "System.Resources.ResourceManager": "4.3.0",
          "System.Runtime": "4.3.0",
          "System.Runtime.Extensions": "4.3.0",
          "System.Runtime.Serialization.Primitives": "4.3.0",
          "System.Text.Encoding": "4.3.0",
          "System.Text.Encoding.Extensions": "4.3.0",
          "System.Text.RegularExpressions": "4.3.0",
          "System.Threading": "4.3.0",
          "System.Threading.Tasks": "4.3.0",
          "System.Xml.ReaderWriter": "4.3.0",
          "System.Xml.XDocument": "4.3.0",
          "System.Xml.XmlDocument": "4.3.0",
          "System.Xml.XmlSerializer": "4.3.0"
        }
      },
      "System.Reflection/4.3.0": {
        "dependencies": {
          "System.IO": "4.3.0",
          "System.Reflection.Primitives": "4.3.0",
          "System.Runtime": "4.3.0"
        }
      },
      "System.Reflection.Emit/4.3.0": {
        "dependencies": {
          "System.IO": "4.3.0",
          "System.Reflection": "4.3.0",
          "System.Reflection.Emit.ILGeneration": "4.3.0",
          "System.Reflection.Primitives": "4.3.0",
          "System.Runtime": "4.3.0"
        }
      },
      "System.Reflection.Emit.ILGeneration/4.3.0": {
        "dependencies": {
          "System.Reflection": "4.3.0",
          "System.Reflection.Primitives": "4.3.0",
          "System.Runtime": "4.3.0"
        }
      },
      "System.Reflection.Emit.Lightweight/4.3.0": {
        "dependencies": {
          "System.Reflection": "4.3.0",
          "System.Reflection.Emit.ILGeneration": "4.3.0",
          "System.Reflection.Primitives": "4.3.0",
          "System.Runtime": "4.3.0"
        }
      },
      "System.Reflection.Extensions/4.3.0": {
        "dependencies": {
          "System.Reflection": "4.3.0",
          "System.Runtime": "4.3.0"
        }
      },
      "System.Reflection.Primitives/4.3.0": {
        "dependencies": {
          "System.Runtime": "4.3.0"
        }
      },
      "System.Reflection.TypeExtensions/4.3.0": {
        "dependencies": {
          "System.Reflection": "4.3.0",
          "System.Runtime": "4.3.0"
        }
      },
      "System.Resources.ResourceManager/4.3.0": {
        "dependencies": {
          "System.Globalization": "4.3.0",
          "System.Reflection": "4.3.0",
          "System.Runtime": "4.3.0"
        }
      },
      "System.Runtime/4.3.0": {},
      "System.Runtime.CompilerServices.Unsafe/4.5.0": {
        "runtime": {
          "lib/netcoreapp2.0/System.Runtime.CompilerServices.Unsafe.dll": {
            "assemblyVersion": "4.0.4.0",
            "fileVersion": "0.0.0.0"
          }
        }
      },
      "System.Runtime.CompilerServices.VisualC/4.3.0": {
        "dependencies": {
          "System.Runtime": "4.3.0"
        }
      },
      "System.Runtime.Extensions/4.3.0": {
        "dependencies": {
          "System.Runtime": "4.3.0"
        }
      },
      "System.Runtime.Handles/4.3.0": {
        "dependencies": {
          "System.Runtime": "4.3.0"
        }
      },
      "System.Runtime.InteropServices/4.3.0": {
        "dependencies": {
          "System.Reflection": "4.3.0",
          "System.Reflection.Primitives": "4.3.0",
          "System.Runtime": "4.3.0",
          "System.Runtime.Handles": "4.3.0"
        }
      },
      "System.Runtime.Serialization.Primitives/4.3.0": {
        "dependencies": {
          "System.Resources.ResourceManager": "4.3.0",
          "System.Runtime": "4.3.0"
        }
      },
      "System.Runtime.Serialization.Xml/4.3.0": {
        "dependencies": {
          "System.IO": "4.3.0",
          "System.Private.DataContractSerialization": "4.3.0",
          "System.Runtime": "4.3.0",
          "System.Runtime.Serialization.Primitives": "4.3.0",
          "System.Text.Encoding": "4.3.0",
          "System.Xml.ReaderWriter": "4.3.0"
        }
      },
      "System.Security.AccessControl/4.5.0": {
        "dependencies": {
          "System.Security.Principal.Windows": "4.5.0"
        },
        "runtimeTargets": {
          "runtime/win/lib/_._": {
            "rid": "win",
            "assetType": "runtime"
          }
        }
      },
      "System.Security.Cryptography.Primitives/4.3.0": {
        "dependencies": {
          "System.Diagnostics.Debug": "4.3.0",
          "System.Globalization": "4.3.0",
          "System.IO": "4.3.0",
          "System.Resources.ResourceManager": "4.3.0",
          "System.Runtime": "4.3.0",
          "System.Threading": "4.3.0",
          "System.Threading.Tasks": "4.3.0"
        }
      },
      "System.Security.Principal.Windows/4.5.0": {
        "runtimeTargets": {
          "runtime/unix/lib/_._": {
            "rid": "unix",
            "assetType": "runtime"
          },
          "runtime/win/lib/_._": {
            "rid": "win",
            "assetType": "runtime"
          }
        }
      },
      "System.Security.SecureString/4.3.0": {
        "dependencies": {
          "System.Resources.ResourceManager": "4.3.0",
          "System.Runtime": "4.3.0",
          "System.Runtime.Handles": "4.3.0",
          "System.Runtime.InteropServices": "4.3.0",
          "System.Security.Cryptography.Primitives": "4.3.0",
          "System.Text.Encoding": "4.3.0",
          "System.Threading": "4.3.0"
        },
        "runtimeTargets": {
          "runtime/unix/lib/_._": {
            "rid": "unix",
            "assetType": "runtime"
          },
          "runtime/win/lib/_._": {
            "rid": "win",
            "assetType": "runtime"
          }
        }
      },
      "System.Text.Encoding/4.3.0": {
        "dependencies": {
          "System.Runtime": "4.3.0"
        }
      },
      "System.Text.Encoding.CodePages/4.5.0": {
        "dependencies": {
          "System.Runtime.CompilerServices.Unsafe": "4.5.0"
        },
        "runtime": {
          "lib/netstandard2.0/System.Text.Encoding.CodePages.dll": {
            "assemblyVersion": "4.1.1.0",
            "fileVersion": "4.6.26515.6"
          }
        },
        "runtimeTargets": {
          "runtimes/win/lib/netcoreapp2.0/System.Text.Encoding.CodePages.dll": {
            "rid": "win",
            "assetType": "runtime",
            "assemblyVersion": "4.1.1.0",
            "fileVersion": "4.6.26515.6"
          }
        }
      },
      "System.Text.Encoding.Extensions/4.3.0": {
        "dependencies": {
          "System.Runtime": "4.3.0",
          "System.Text.Encoding": "4.3.0"
        }
      },
      "System.Text.RegularExpressions/4.3.0": {
        "dependencies": {
          "System.Runtime": "4.3.0"
        }
      },
      "System.Threading/4.3.0": {
        "dependencies": {
          "System.Runtime": "4.3.0",
          "System.Threading.Tasks": "4.3.0"
        }
      },
      "System.Threading.Tasks/4.3.0": {
        "dependencies": {
          "System.Runtime": "4.3.0"
        }
      },
      "System.Threading.Tasks.Extensions/4.3.0": {
        "dependencies": {
          "System.Collections": "4.3.0",
          "System.Runtime": "4.3.0",
          "System.Threading.Tasks": "4.3.0"
        }
      },
      "System.Threading.ThreadPool/4.3.0": {
        "dependencies": {
          "System.Runtime": "4.3.0",
          "System.Runtime.Handles": "4.3.0"
        }
      },
      "System.Xml.ReaderWriter/4.3.0": {
        "dependencies": {
          "System.Collections": "4.3.0",
          "System.Diagnostics.Debug": "4.3.0",
          "System.Globalization": "4.3.0",
          "System.IO": "4.3.0",
          "System.IO.FileSystem": "4.3.0",
          "System.IO.FileSystem.Primitives": "4.3.0",
          "System.Resources.ResourceManager": "4.3.0",
          "System.Runtime": "4.3.0",
          "System.Runtime.Extensions": "4.3.0",
          "System.Runtime.InteropServices": "4.3.0",
          "System.Text.Encoding": "4.3.0",
          "System.Text.Encoding.Extensions": "4.3.0",
          "System.Text.RegularExpressions": "4.3.0",
          "System.Threading.Tasks": "4.3.0",
          "System.Threading.Tasks.Extensions": "4.3.0"
        }
      },
      "System.Xml.XDocument/4.3.0": {
        "dependencies": {
          "System.Collections": "4.3.0",
          "System.Diagnostics.Debug": "4.3.0",
          "System.Diagnostics.Tools": "4.3.0",
          "System.Globalization": "4.3.0",
          "System.IO": "4.3.0",
          "System.Reflection": "4.3.0",
          "System.Resources.ResourceManager": "4.3.0",
          "System.Runtime": "4.3.0",
          "System.Runtime.Extensions": "4.3.0",
          "System.Text.Encoding": "4.3.0",
          "System.Threading": "4.3.0",
          "System.Xml.ReaderWriter": "4.3.0"
        }
      },
      "System.Xml.XmlDocument/4.3.0": {
        "dependencies": {
          "System.Collections": "4.3.0",
          "System.Diagnostics.Debug": "4.3.0",
          "System.Globalization": "4.3.0",
          "System.IO": "4.3.0",
          "System.Resources.ResourceManager": "4.3.0",
          "System.Runtime": "4.3.0",
          "System.Runtime.Extensions": "4.3.0",
          "System.Text.Encoding": "4.3.0",
          "System.Threading": "4.3.0",
          "System.Xml.ReaderWriter": "4.3.0"
        }
      },
      "System.Xml.XmlSerializer/4.3.0": {
        "dependencies": {
          "System.Collections": "4.3.0",
          "System.Globalization": "4.3.0",
          "System.IO": "4.3.0",
          "System.Linq": "4.3.0",
          "System.Reflection": "4.3.0",
          "System.Reflection.Emit": "4.3.0",
          "System.Reflection.Emit.ILGeneration": "4.3.0",
          "System.Reflection.Extensions": "4.3.0",
          "System.Reflection.Primitives": "4.3.0",
          "System.Reflection.TypeExtensions": "4.3.0",
          "System.Resources.ResourceManager": "4.3.0",
          "System.Runtime": "4.3.0",
          "System.Runtime.Extensions": "4.3.0",
          "System.Text.RegularExpressions": "4.3.0",
          "System.Threading": "4.3.0",
          "System.Xml.ReaderWriter": "4.3.0",
          "System.Xml.XmlDocument": "4.3.0"
        }
      }
    }
  },
  "libraries": {
    "dbatools/1.0.0": {
      "type": "project",
      "serviceable": false,
      "sha512": ""
    },
    "Microsoft.Management.Infrastructure/1.0.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-farHXHRCm0ZaioRlsQtHjb18sZ+X2jluOv3L/aOucXW83BmfHfXC7t+GtKZSK7Gd1y2lFh6R/pr31IpvRvZbOg==",
      "path": "microsoft.management.infrastructure/1.0.0",
      "hashPath": "microsoft.management.infrastructure.1.0.0.nupkg.sha512"
    },
    "Microsoft.Win32.Registry/4.5.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-vduxuHEqRgRrTE8wYG8Wxj/+6wwzddOmZzjKZx6rFMc/91aUBxI5etAFYxesoNaIja5NpgSTcnk6cN8BeYXf9A==",
      "path": "microsoft.win32.registry/4.5.0",
      "hashPath": "microsoft.win32.registry.4.5.0.nupkg.sha512"
    },
    "runtime.native.System.Data.SqlClient.sni/4.4.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-A8v6PGmk+UGbfWo5Ixup0lPM4swuSwOiayJExZwKIOjTlFFQIsu3QnDXECosBEyrWSPryxBVrdqtJyhK3BaupQ==",
      "path": "runtime.native.system.data.sqlclient.sni/4.4.0",
      "hashPath": "runtime.native.system.data.sqlclient.sni.4.4.0.nupkg.sha512"
    },
    "runtime.win-arm64.runtime.native.System.Data.SqlClient.sni/4.4.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-LbrynESTp3bm5O/+jGL8v0Qg5SJlTV08lpIpFesXjF6uGNMWqFnUQbYBJwZTeua6E/Y7FIM1C54Ey1btLWupdg==",
      "path": "runtime.win-arm64.runtime.native.system.data.sqlclient.sni/4.4.0",
      "hashPath": "runtime.win-arm64.runtime.native.system.data.sqlclient.sni.4.4.0.nupkg.sha512"
    },
    "runtime.win-x64.runtime.native.System.Data.SqlClient.sni/4.4.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-38ugOfkYJqJoX9g6EYRlZB5U2ZJH51UP8ptxZgdpS07FgOEToV+lS11ouNK2PM12Pr6X/PpT5jK82G3DwH/SxQ==",
      "path": "runtime.win-x64.runtime.native.system.data.sqlclient.sni/4.4.0",
      "hashPath": "runtime.win-x64.runtime.native.system.data.sqlclient.sni.4.4.0.nupkg.sha512"
    },
    "runtime.win-x86.runtime.native.System.Data.SqlClient.sni/4.4.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-YhEdSQUsTx+C8m8Bw7ar5/VesXvCFMItyZF7G1AUY+OM0VPZUOeAVpJ4Wl6fydBGUYZxojTDR3I6Bj/+BPkJNA==",
      "path": "runtime.win-x86.runtime.native.system.data.sqlclient.sni/4.4.0",
      "hashPath": "runtime.win-x86.runtime.native.system.data.sqlclient.sni.4.4.0.nupkg.sha512"
    },
    "System.Collections/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-3Dcj85/TBdVpL5Zr+gEEBUuFe2icOnLalmEh9hfck1PTYbbyWuZgh4fmm2ysCLTrqLQw6t3TgTyJ+VLp+Qb+Lw==",
      "path": "system.collections/4.3.0",
      "hashPath": "system.collections.4.3.0.nupkg.sha512"
    },
    "System.Collections.Concurrent/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-ztl69Xp0Y/UXCL+3v3tEU+lIy+bvjKNUmopn1wep/a291pVPK7dxBd6T7WnlQqRog+d1a/hSsgRsmFnIBKTPLQ==",
      "path": "system.collections.concurrent/4.3.0",
      "hashPath": "system.collections.concurrent.4.3.0.nupkg.sha512"
    },
    "System.Data.SqlClient/4.5.1": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-qXTvTFkBds7bnN+ntBMHGvmH3pCAkfT4TE1z2Xvfqo4wKMQC77O4aXsYCc7dzCESC+/Gom6l0GLuebpFx7MDvg==",
      "path": "system.data.sqlclient/4.5.1",
      "hashPath": "system.data.sqlclient.4.5.1.nupkg.sha512"
    },
    "System.Diagnostics.Debug/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-ZUhUOdqmaG5Jk3Xdb8xi5kIyQYAA4PnTNlHx1mu9ZY3qv4ELIdKbnL/akbGaKi2RnNUWaZsAs31rvzFdewTj2g==",
      "path": "system.diagnostics.debug/4.3.0",
      "hashPath": "system.diagnostics.debug.4.3.0.nupkg.sha512"
    },
    "System.Diagnostics.Tools/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-UUvkJfSYJMM6x527dJg2VyWPSRqIVB0Z7dbjHst1zmwTXz5CcXSYJFWRpuigfbO1Lf7yfZiIaEUesfnl/g5EyA==",
      "path": "system.diagnostics.tools/4.3.0",
      "hashPath": "system.diagnostics.tools.4.3.0.nupkg.sha512"
    },
    "System.Diagnostics.Tracing/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-rswfv0f/Cqkh78rA5S8eN8Neocz234+emGCtTF3lxPY96F+mmmUen6tbn0glN6PMvlKQb9bPAY5e9u7fgPTkKw==",
      "path": "system.diagnostics.tracing/4.3.0",
      "hashPath": "system.diagnostics.tracing.4.3.0.nupkg.sha512"
    },
    "System.Globalization/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-kYdVd2f2PAdFGblzFswE4hkNANJBKRmsfa2X5LG2AcWE1c7/4t0pYae1L8vfZ5xvE2nK/R9JprtToA61OSHWIg==",
      "path": "system.globalization/4.3.0",
      "hashPath": "system.globalization.4.3.0.nupkg.sha512"
    },
    "System.IO/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-3qjaHvxQPDpSOYICjUoTsmoq5u6QJAFRUITgeT/4gqkF1bajbSmb1kwSxEA8AHlofqgcKJcM8udgieRNhaJ5Cg==",
      "path": "system.io/4.3.0",
      "hashPath": "system.io.4.3.0.nupkg.sha512"
    },
    "System.IO.FileSystem/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-3wEMARTnuio+ulnvi+hkRNROYwa1kylvYahhcLk4HSoVdl+xxTFVeVlYOfLwrDPImGls0mDqbMhrza8qnWPTdA==",
      "path": "system.io.filesystem/4.3.0",
      "hashPath": "system.io.filesystem.4.3.0.nupkg.sha512"
    },
    "System.IO.FileSystem.Primitives/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-6QOb2XFLch7bEc4lIcJH49nJN2HV+OC3fHDgsLVsBVBk3Y4hFAnOBGzJ2lUu7CyDDFo9IBWkSsnbkT6IBwwiMw==",
      "path": "system.io.filesystem.primitives/4.3.0",
      "hashPath": "system.io.filesystem.primitives.4.3.0.nupkg.sha512"
    },
    "System.Linq/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-5DbqIUpsDp0dFftytzuMmc0oeMdQwjcP/EWxsksIz/w1TcFRkZ3yKKz0PqiYFMmEwPSWw+qNVqD7PJ889JzHbw==",
      "path": "system.linq/4.3.0",
      "hashPath": "system.linq.4.3.0.nupkg.sha512"
    },
    "System.Private.DataContractSerialization/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-yDaJ2x3mMmjdZEDB4IbezSnCsnjQ4BxinKhRAaP6kEgL6Bb6jANWphs5SzyD8imqeC/3FxgsuXT6ykkiH1uUmA==",
      "path": "system.private.datacontractserialization/4.3.0",
      "hashPath": "system.private.datacontractserialization.4.3.0.nupkg.sha512"
    },
    "System.Reflection/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-KMiAFoW7MfJGa9nDFNcfu+FpEdiHpWgTcS2HdMpDvt9saK3y/G4GwprPyzqjFH9NTaGPQeWNHU+iDlDILj96aQ==",
      "path": "system.reflection/4.3.0",
      "hashPath": "system.reflection.4.3.0.nupkg.sha512"
    },
    "System.Reflection.Emit/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-228FG0jLcIwTVJyz8CLFKueVqQK36ANazUManGaJHkO0icjiIypKW7YLWLIWahyIkdh5M7mV2dJepllLyA1SKg==",
      "path": "system.reflection.emit/4.3.0",
      "hashPath": "system.reflection.emit.4.3.0.nupkg.sha512"
    },
    "System.Reflection.Emit.ILGeneration/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-59tBslAk9733NXLrUJrwNZEzbMAcu8k344OYo+wfSVygcgZ9lgBdGIzH/nrg3LYhXceynyvTc8t5/GD4Ri0/ng==",
      "path": "system.reflection.emit.ilgeneration/4.3.0",
      "hashPath": "system.reflection.emit.ilgeneration.4.3.0.nupkg.sha512"
    },
    "System.Reflection.Emit.Lightweight/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-oadVHGSMsTmZsAF864QYN1t1QzZjIcuKU3l2S9cZOwDdDueNTrqq1yRj7koFfIGEnKpt6NjpL3rOzRhs4ryOgA==",
      "path": "system.reflection.emit.lightweight/4.3.0",
      "hashPath": "system.reflection.emit.lightweight.4.3.0.nupkg.sha512"
    },
    "System.Reflection.Extensions/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-rJkrJD3kBI5B712aRu4DpSIiHRtr6QlfZSQsb0hYHrDCZORXCFjQfoipo2LaMUHoT9i1B7j7MnfaEKWDFmFQNQ==",
      "path": "system.reflection.extensions/4.3.0",
      "hashPath": "system.reflection.extensions.4.3.0.nupkg.sha512"
    },
    "System.Reflection.Primitives/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-5RXItQz5As4xN2/YUDxdpsEkMhvw3e6aNveFXUn4Hl/udNTCNhnKp8lT9fnc3MhvGKh1baak5CovpuQUXHAlIA==",
      "path": "system.reflection.primitives/4.3.0",
      "hashPath": "system.reflection.primitives.4.3.0.nupkg.sha512"
    },
    "System.Reflection.TypeExtensions/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-7u6ulLcZbyxB5Gq0nMkQttcdBTx57ibzw+4IOXEfR+sXYQoHvjW5LTLyNr8O22UIMrqYbchJQJnos4eooYzYJA==",
      "path": "system.reflection.typeextensions/4.3.0",
      "hashPath": "system.reflection.typeextensions.4.3.0.nupkg.sha512"
    },
    "System.Resources.ResourceManager/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-/zrcPkkWdZmI4F92gL/TPumP98AVDu/Wxr3CSJGQQ+XN6wbRZcyfSKVoPo17ilb3iOr0cCRqJInGwNMolqhS8A==",
      "path": "system.resources.resourcemanager/4.3.0",
      "hashPath": "system.resources.resourcemanager.4.3.0.nupkg.sha512"
    },
    "System.Runtime/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-JufQi0vPQ0xGnAczR13AUFglDyVYt4Kqnz1AZaiKZ5+GICq0/1MH/mO/eAJHt/mHW1zjKBJd7kV26SrxddAhiw==",
      "path": "system.runtime/4.3.0",
      "hashPath": "system.runtime.4.3.0.nupkg.sha512"
    },
    "System.Runtime.CompilerServices.Unsafe/4.5.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-6zBxkHYemB0kQiHP3vGXGRXejZVoNVuMn2paUuqKKi5Wyjkxfkp+D0rd0c3VrGwotidRINt6KpOi2smL4VkJKw==",
      "path": "system.runtime.compilerservices.unsafe/4.5.0",
      "hashPath": "system.runtime.compilerservices.unsafe.4.5.0.nupkg.sha512"
    },
    "System.Runtime.CompilerServices.VisualC/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-/dcn1oXqK/p/VnTYWNSf4OXlFIfzCRE/kqWz4+/r5B2S4zlKifB1FqklEEYs5zmE1JE3syvrJ5U4syOwsDQZbA==",
      "path": "system.runtime.compilerservices.visualc/4.3.0",
      "hashPath": "system.runtime.compilerservices.visualc.4.3.0.nupkg.sha512"
    },
    "System.Runtime.Extensions/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-guW0uK0fn5fcJJ1tJVXYd7/1h5F+pea1r7FLSOz/f8vPEqbR2ZAknuRDvTQ8PzAilDveOxNjSfr0CHfIQfFk8g==",
      "path": "system.runtime.extensions/4.3.0",
      "hashPath": "system.runtime.extensions.4.3.0.nupkg.sha512"
    },
    "System.Runtime.Handles/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-OKiSUN7DmTWeYb3l51A7EYaeNMnvxwE249YtZz7yooT4gOZhmTjIn48KgSsw2k2lYdLgTKNJw/ZIfSElwDRVgg==",
      "path": "system.runtime.handles/4.3.0",
      "hashPath": "system.runtime.handles.4.3.0.nupkg.sha512"
    },
    "System.Runtime.InteropServices/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-uv1ynXqiMK8mp1GM3jDqPCFN66eJ5w5XNomaK2XD+TuCroNTLFGeZ+WCmBMcBDyTFKou3P6cR6J/QsaqDp7fGQ==",
      "path": "system.runtime.interopservices/4.3.0",
      "hashPath": "system.runtime.interopservices.4.3.0.nupkg.sha512"
    },
    "System.Runtime.Serialization.Primitives/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-Wz+0KOukJGAlXjtKr+5Xpuxf8+c8739RI1C+A2BoQZT+wMCCoMDDdO8/4IRHfaVINqL78GO8dW8G2lW/e45Mcw==",
      "path": "system.runtime.serialization.primitives/4.3.0",
      "hashPath": "system.runtime.serialization.primitives.4.3.0.nupkg.sha512"
    },
    "System.Runtime.Serialization.Xml/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-nUQx/5OVgrqEba3+j7OdiofvVq9koWZAC7Z3xGI8IIViZqApWnZ5+lLcwYgTlbkobrl/Rat+Jb8GeD4WQESD2A==",
      "path": "system.runtime.serialization.xml/4.3.0",
      "hashPath": "system.runtime.serialization.xml.4.3.0.nupkg.sha512"
    },
    "System.Security.AccessControl/4.5.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-aVjTe36YkO8FzfNhMLoPEzv3gF9rphoW9ngFhG/MH4zzEPLx07sNrgCLwMP4Wx2leI6qarMrGv21OwQXYUKLmw==",
      "path": "system.security.accesscontrol/4.5.0",
      "hashPath": "system.security.accesscontrol.4.5.0.nupkg.sha512"
    },
    "System.Security.Cryptography.Primitives/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-7bDIyVFNL/xKeFHjhobUAQqSpJq9YTOpbEs6mR233Et01STBMXNAc/V+BM6dwYGc95gVh/Zf+iVXWzj3mE8DWg==",
      "path": "system.security.cryptography.primitives/4.3.0",
      "hashPath": "system.security.cryptography.primitives.4.3.0.nupkg.sha512"
    },
    "System.Security.Principal.Windows/4.5.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-WA9ETb/pY3BjnxKjBUHEgO59B7d/nnmjHFsqjJ2eDT780nD769CT1/bw2ia0Z6W7NqlcqokE6sKGKa6uw88XGA==",
      "path": "system.security.principal.windows/4.5.0",
      "hashPath": "system.security.principal.windows.4.5.0.nupkg.sha512"
    },
    "System.Security.SecureString/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-PnXp38O9q/2Oe4iZHMH60kinScv6QiiL2XH54Pj2t0Y6c2zKPEiAZsM/M3wBOHLNTBDFP0zfy13WN2M0qFz5jg==",
      "path": "system.security.securestring/4.3.0",
      "hashPath": "system.security.securestring.4.3.0.nupkg.sha512"
    },
    "System.Text.Encoding/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-BiIg+KWaSDOITze6jGQynxg64naAPtqGHBwDrLaCtixsa5bKiR8dpPOHA7ge3C0JJQizJE+sfkz1wV+BAKAYZw==",
      "path": "system.text.encoding/4.3.0",
      "hashPath": "system.text.encoding.4.3.0.nupkg.sha512"
    },
    "System.Text.Encoding.CodePages/4.5.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-16EVkWmNnoH3/Yj9c5s5VuLK5Uv/Dnkc3P2kMmnD7wJcUuvcHVvM2IhVJanf2hHRZUitH+cIkPCPHrBoCXc7Rw==",
      "path": "system.text.encoding.codepages/4.5.0",
      "hashPath": "system.text.encoding.codepages.4.5.0.nupkg.sha512"
    },
    "System.Text.Encoding.Extensions/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-YVMK0Bt/A43RmwizJoZ22ei2nmrhobgeiYwFzC4YAN+nue8RF6djXDMog0UCn+brerQoYVyaS+ghy9P/MUVcmw==",
      "path": "system.text.encoding.extensions/4.3.0",
      "hashPath": "system.text.encoding.extensions.4.3.0.nupkg.sha512"
    },
    "System.Text.RegularExpressions/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-RpT2DA+L660cBt1FssIE9CAGpLFdFPuheB7pLpKpn6ZXNby7jDERe8Ua/Ne2xGiwLVG2JOqziiaVCGDon5sKFA==",
      "path": "system.text.regularexpressions/4.3.0",
      "hashPath": "system.text.regularexpressions.4.3.0.nupkg.sha512"
    },
    "System.Threading/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-VkUS0kOBcUf3Wwm0TSbrevDDZ6BlM+b/HRiapRFWjM5O0NS0LviG0glKmFK+hhPDd1XFeSdU1GmlLhb2CoVpIw==",
      "path": "system.threading/4.3.0",
      "hashPath": "system.threading.4.3.0.nupkg.sha512"
    },
    "System.Threading.Tasks/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-LbSxKEdOUhVe8BezB/9uOGGppt+nZf6e1VFyw6v3DN6lqitm0OSn2uXMOdtP0M3W4iMcqcivm2J6UgqiwwnXiA==",
      "path": "system.threading.tasks/4.3.0",
      "hashPath": "system.threading.tasks.4.3.0.nupkg.sha512"
    },
    "System.Threading.Tasks.Extensions/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-npvJkVKl5rKXrtl1Kkm6OhOUaYGEiF9wFbppFRWSMoApKzt2PiPHT2Bb8a5sAWxprvdOAtvaARS9QYMznEUtug==",
      "path": "system.threading.tasks.extensions/4.3.0",
      "hashPath": "system.threading.tasks.extensions.4.3.0.nupkg.sha512"
    },
    "System.Threading.ThreadPool/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-k/+g4b7vjdd4aix83sTgC9VG6oXYKAktSfNIJUNGxPEj7ryEOfzHHhfnmsZvjxawwcD9HyWXKCXmPjX8U4zeSw==",
      "path": "system.threading.threadpool/4.3.0",
      "hashPath": "system.threading.threadpool.4.3.0.nupkg.sha512"
    },
    "System.Xml.ReaderWriter/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-GrprA+Z0RUXaR4N7/eW71j1rgMnEnEVlgii49GZyAjTH7uliMnrOU3HNFBr6fEDBCJCIdlVNq9hHbaDR621XBA==",
      "path": "system.xml.readerwriter/4.3.0",
      "hashPath": "system.xml.readerwriter.4.3.0.nupkg.sha512"
    },
    "System.Xml.XDocument/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-5zJ0XDxAIg8iy+t4aMnQAu0MqVbqyvfoUVl1yDV61xdo3Vth45oA2FoY4pPkxYAH5f8ixpmTqXeEIya95x0aCQ==",
      "path": "system.xml.xdocument/4.3.0",
      "hashPath": "system.xml.xdocument.4.3.0.nupkg.sha512"
    },
    "System.Xml.XmlDocument/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-lJ8AxvkX7GQxpC6GFCeBj8ThYVyQczx2+f/cWHJU8tjS7YfI6Cv6bon70jVEgs2CiFbmmM8b9j1oZVx0dSI2Ww==",
      "path": "system.xml.xmldocument/4.3.0",
      "hashPath": "system.xml.xmldocument.4.3.0.nupkg.sha512"
    },
    "System.Xml.XmlSerializer/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-MYoTCP7EZ98RrANESW05J5ZwskKDoN0AuZ06ZflnowE50LTpbR5yRg3tHckTVm5j/m47stuGgCrCHWePyHS70Q==",
      "path": "system.xml.xmlserializer/4.3.0",
      "hashPath": "system.xml.xmlserializer.4.3.0.nupkg.sha512"
    }
  }
}

tools\dbatools\bin\netcoreapp2.1\dbatools.dll

md5: C071E63932D16EB11E2CDC1CF133AD00 | sha1: B0259D2EE9811A433E1AEEB1AFE6C4F0EF37A55C | sha256: 2D6928D37E8DFD008A05E28373652182431866DB69C4521007686225483ABF59 | sha512: 73118BD626D4661EF8137D5B3A71E05766960596A2E9CC0B552DB2609C32BD93E62CA0ED09BF2C41C68AA66C114B3873D5C1222A98FF6C90AD3BC6324F202A38

tools\dbatools\bin\netcoreapp2.1\dbatools.pdb

tools\dbatools\bin\netcoreapp2.1\dbatools.xml

<?xml version="1.0"?>
<doc>
    <assembly>
        <name>dbatools</name>
    </assembly>
    <members>
        <member name="T:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand">
            <summary>
            Implements the Select-DbaObject command
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.InputObject">
            <summary>
            The actual input object that is being processed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.Property">
            <summary>
            The properties to select. Supports fancy DSL
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.ExcludeProperty">
            <summary>
            Properties to skip
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.ExpandProperty">
            <summary>
            A property to expand.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.Unique">
            <summary>
            Whether to exclude duplicates
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.Last">
            <summary>
            The last number of items to pick
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.First">
            <summary>
            Pick the first n items.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.Skip">
            <summary>
            Skip n items before picking items
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.SkipLast">
            <summary>
            Skip the last n items
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.Wait">
            <summary>
            
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.Index">
            <summary>
            
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.ShowProperty">
            <summary>
            THe properties to display by default
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.ShowExcludeProperty">
            <summary>
            The properties to NOT display by default
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.TypeName">
            <summary>
            The typename to assign to the psobject
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.KeepInputObject">
            <summary>
            Keep the original input object, just add to it.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand._NonclonedProperties">
            <summary>
            List of properties to NOT clone into the hashtable used against Select-Object
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand._NoAdjustment">
            <summary>
            Whether some adjustments to the object need to be done or whether the Select-Object output can be simply passed through.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand._DisplayPropertySet">
            <summary>
            The set controlling what properties will be shown by default
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand._Pipeline">
            <summary>
            THe pipeline that is wrapped around Select-Object
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.BeginProcessing">
            <summary>
            Implements the begin action of the command
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.ProcessRecord">
            <summary>
            Implements the process action of the command
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.EndProcessing">
            <summary>
            Implements the end action of the command
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand">
            <summary>
            Implements the Set-PSFConfig command
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.FullName">
            <summary>
            The full name of the setting
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.Module">
            <summary>
            The name of the module the setting belongs to.
            Is optional due to just specifying a name is legal, in which case the first name segment becomes the module name.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.Name">
            <summary>
            The name of the setting within a module.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.Value">
            <summary>
            The value to apply.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.PersistedValue">
            <summary>
            The persisted value to apply.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.PersistedType">
            <summary>
            The persisted type to apply.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.Description">
            <summary>
            Add documentation to the setting.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.Validation">
            <summary>
            The validation script to use.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.Handler">
            <summary>
            The handling script to apply when changing the value.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.Hidden">
            <summary>
            Whether the setting should be hidden from casual discovery.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.Default">
            <summary>
            Whether the setting should be applied only when nothing exists yet.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.Initialize">
            <summary>
            Whether this is the configuration initialization call.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.SimpleExport">
            <summary>
            Enabling this will cause the module to use friendly json notation on export to file.
            This may result in loss of data precision, but is more userfriendly.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.ModuleExport">
            <summary>
            Whether this setting applies to module scope file export.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.DisableValidation">
            <summary>
            Do not apply the validation script when changing values.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.DisableHandler">
            <summary>
            Do not run the handler script when changing values.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.PassThru">
            <summary>
            Return the changed configuration setting.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.EnableException">
            <summary>
            Enable throwing exceptions.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand._Config">
            <summary>
            The configuration item changed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand._KillIt">
            <summary>
            Whether execution should be terminated silently.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand._Initialize">
            <summary>
            Whether this is an initialization execution.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand._Persisted">
            <summary>
            Whether persisted values need to be restored.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand._Exists">
            <summary>
            Whether the setting already exists.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand._PolicyEnforced">
            <summary>
            The setting to be affected was enforced by policy and cannot be changed by the user.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand._NameModule">
            <summary>
            Processed name of module.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand._NameName">
            <summary>
            Processed name of setting within module.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand._NameFull">
            <summary>
            Processed full name of setting.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand._ValidationErrorMessage">
            <summary>
            The reason validation failed.
            Filled by ApplyValue.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.BeginProcessing">
            <summary>
            Implements the begin action of Set-PSFConfig
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.ProcessRecord">
            <summary>
            Implements the process action of Set-PSFConfig
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.ApplyValue(System.Object)">
            <summary>
            Applies a value to a configuration item, invoking validation and handler scriptblocks.
            </summary>
            <param name="Value">The value to apply</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.ApplyCommonSettings">
            <summary>
            Abstracts out 
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand">
            <summary>
            Implements the Write-Message command, performing message handling and loggin
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.Level">
            <summary>
            This parameter represents the verbosity of the message. The lower the number, the more important it is for a human user to read the message.
            By default, the levels are distributed like this:
            - 1-3 Direct verbose output to the user (using Write-Host)
            - 4-6 Output only visible when requesting extra verbosity (using Write-Verbose)
            - 1-9 Debugging information, written using Write-Debug
            
            In addition, it is possible to select the level "Warning" which moves the message out of the configurable range:
            The user will always be shown this message, unless he silences the entire verbosity.
            
            Possible levels:
            Critical (1), Important / Output / Host (2), Significant (3), VeryVerbose (4), Verbose (5), SomewhatVerbose (6), System (7), Debug (8), InternalComment (9), Warning (666)
            Either one of the strings or its respective number will do as input.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.Message">
            <summary>
            The message to write/log. The function name and timestamp will automatically be prepended.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.Tag">
            <summary>
            Tags to add to the message written.
            This allows filtering and grouping by category of message, targeting specific messages.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.FunctionName">
            <summary>
            The name of the calling function.
            Will be automatically set, but can be overridden when necessary.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.ModuleName">
            <summary>
            The name of the module, the calling function is part of.
            Will be automatically set, but can be overridden when necessary.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.File">
            <summary>
            The file in which Write-Message was called.
            Will be automatically set, but can be overridden when necessary.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.Line">
            <summary>
            The line on which Write-Message was called.
            Will be automatically set, but can be overridden when necessary.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.ErrorRecord">
            <summary>
            If an error record should be noted with the message, add the full record here.
            Especially designed for use with Warning-mode, it can legally be used in either mode.
            The error will be added to the $Error variable and enqued in the logging/debugging system.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.Exception">
            <summary>
            Allows specifying an inner exception as input object. This will be passed on to the logging and used for messages.
            When specifying both ErrorRecord AND Exception, Exception wins, but ErrorRecord is still used for record metadata.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.Once">
            <summary>
            Setting this parameter will cause this function to write the message only once per session.
            The string passed here and the calling function's name are used to create a unique ID, which is then used to register the action in the configuration system.
            Thus will the lockout only be written if called once and not burden the system unduly.
            This lockout will be written as a hidden value, to see it use Get-DbaConfig -Force.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.OverrideExceptionMessage">
            <summary>
            Disables automatic appending of exception messages.
            Use in cases where you already have a speaking message interpretation and do not need the original message.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.Target">
            <summary>
            Add the object the message is all about, in order to simplify debugging / troubleshooting.
            For example, when calling this from a function targeting a remote computer, the computername could be specified here, allowing all messages to easily be correlated to the object processed.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.EnableException">
            <summary>
            This parameters disables user-friendly warnings and enables the throwing of exceptions.
            This is less user friendly, but allows catching exceptions in calling scripts.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.Breakpoint">
            <summary>
            Enables breakpoints on the current message. By default, setting '-Debug' will NOT cause an interrupt on the current position.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._timestamp">
            <summary>
            The start time of the cmdlet
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._silent">
            <summary>
            Whether this cmdlet is run in silent mode
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._fromStopFunction">
            <summary>
            Whether this cmdlet was called by Stop-Function
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._callStack">
            <summary>
            The current callstack
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._stackDepth">
            <summary>
            How many items exist on the callstack
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._message">
            <summary>
            The message to write
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._messageSimple">
            <summary>
            The message simplified without timestamps. Used for logging.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._messageColor">
            <summary>
            The message to write in color
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._messageDeveloper">
            <summary>
            Non-colored version of developermode
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._messageDeveloperColor">
            <summary>
            Colored version of developermode
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._writeHostScript">
            <summary>
            Scriptblock that writes the host messages
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._Tags">
            <summary>
            List of tags to process
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._isDebug">
            <summary>
            Whether debug mode is enabled
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._errorQualifiedMessage">
            <summary>
            The input message with the error content included if desired
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._MessageSystem">
            <summary>
            The final message to use for internal logging
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._MessageStreams">
            <summary>
            The final message to use for writing to streams, such as verbose or warning
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._MessageHost">
            <summary>
            The final message to use for host messages (write using Write-HostColor)
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._BreadCrumbsString">
            <summary>
            Provide breadcrumb queue of the callstack
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._BreadCrumbsStringColored">
            <summary>
            Provide a breadcrumb queue of the callstack in color tags
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.BeginProcessing">
            <summary>
            Processes the begin phase of the cmdlet
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.ProcessRecord">
            <summary>
            Processes the process phase of the cmdlet
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.ResolveTarget(System.Object)">
            <summary>
            Processes the target transform rules on an input object
            </summary>
            <param name="Item">The item to transform</param>
            <returns>The transformed object</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.ResolveException(System.Exception)">
            <summary>
            Processes the specified exception specified
            </summary>
            <param name="Item">The exception to process</param>
            <returns>The transformed exception</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.ResolveLevel(Sqlcollaborative.Dbatools.Message.MessageLevel)">
            <summary>
            Processs the input level and apply policy and rules
            </summary>
            <param name="Level">The original level of the message</param>
            <returns>The processed level</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.GetMessage">
            <summary>
            Builds the message item for display of Verbose, Warning and Debug streams
            </summary>
            <returns>The message to return</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.GetMessageSimple">
            <summary>
            Builds the base message for internal system use.
            </summary>
            <returns>The message to return</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.GetMessageColor">
            <summary>
            Builds the message item if needed and returns it
            </summary>
            <returns>The message to return</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.GetMessageDeveloper">
            <summary>
            Non-host output in developermode
            </summary>
            <returns>The string to write on messages that don't go straight to Write-HostColor</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.GetMessageDeveloperColor">
            <summary>
            Host output in developermode
            </summary>
            <returns>The string to write on messages that go straight to Write-HostColor</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Computer.DiskSpace">
            <summary>
            Data Container for the output of Get-DbaDiskSpace
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.ComputerName">
            <summary>
            The computer that was scanned
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.Name">
            <summary>
            Name of the disk
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.Label">
            <summary>
            Label of the disk
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.Capacity">
            <summary>
            What's the total capacity of the disk?
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.Free">
            <summary>
            How much is still free?
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.PercentFree">
            <summary>
            How much is still free
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.BlockSize">
            <summary>
            What blocksize is the object set to
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.FileSystem">
            <summary>
            What filesystem is installed on the system
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.Type">
            <summary>
            What kind of drive is it?
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.IsSqlDisk">
            <summary>
            Whether the drive is a sql disk. Nullable, because it is an optional property and may not always be included, thus a third state is necessary.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.Server">
            <summary>
            The computer that was scanned. Legacy-Name
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.DriveType">
            <summary>
            The type of drive this is in the legacy string notation
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.SizeInBytes">
            <summary>
            The total capacity in Bytes
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.FreeInBytes">
            <summary>
            The free space in Bytes
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.SizeInKB">
            <summary>
            The total capacity in KB
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.FreeInKB">
            <summary>
            The free space in KB
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.SizeInMB">
            <summary>
            The total capacity in MB
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.FreeInMB">
            <summary>
            The free space in MB
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.SizeInGB">
            <summary>
            The total capacity in GB
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.FreeInGB">
            <summary>
            The free space in GB
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.SizeInTB">
            <summary>
            The total capacity in TB
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.FreeInTB">
            <summary>
            The free space in TB
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.SizeInPB">
            <summary>
            The total capacity in PB
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.FreeInPB">
            <summary>
            The free space in PB
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Computer.DriveType">
            <summary>
            What kind of drive are you?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.DriveType.Unknown">
            <summary>
            The drive type is not actually known
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.DriveType.NoRootDirectory">
            <summary>
            The drive has no root directory
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.DriveType.RemovableDisk">
            <summary>
            The drive is a removable disk
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.DriveType.LocalDisk">
            <summary>
            The drive is a local disk
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.DriveType.NetworkDrive">
            <summary>
            The drive is a network drive
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.DriveType.CompactDisk">
            <summary>
            The drive is a compact disk
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.DriveType.RAMDisk">
            <summary>
            The drive is a RAM disk
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Computer.PageFileSetting">
            <summary>
            Data container, listing pagefile settings.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.PageFileSetting.ComputerName">
            <summary>
            The name of the computer
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.PageFileSetting.AutoPageFile">
            <summary>
            Whether Automatic PageFile management is enabled
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.PageFileSetting.FileName">
            <summary>
            The pagefile name
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.PageFileSetting.Status">
            <summary>
            The pagefile status
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.PageFileSetting.SystemManaged">
            <summary>
            Whether the pagefile is system managed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.PageFileSetting.LastModified">
            <summary>
            When were the settings last changed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.PageFileSetting.LastAccessed">
            <summary>
            When were the settings last accessed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.PageFileSetting.AllocatedBaseSize">
            <summary>
            The base allocated pagefile size in MB
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.PageFileSetting.InitialSize">
            <summary>
            The initial pagefile size in MB
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.PageFileSetting.MaximumSize">
            <summary>
            The maximum pagefile size in MB
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.PageFileSetting.PeakUsage">
            <summary>
            The maximum percent of the pagefile limit that has been used
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.PageFileSetting.CurrentUsage">
            <summary>
            The currently used percentage of the pagefile limit that is in use.
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Configuration.Config">
            <summary>
            Configuration Manager as well as individual configuration object.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.Config.Name">
            <summary>
            The Name of the setting
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Configuration.Config.FullName">
            <summary>
            The full name of the configuration entry, comprised of both Module and Name.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.Config.Module">
            <summary>
            The module of the setting. Helps being able to group configurations.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.Config.Description">
            <summary>
            A description of the specific setting
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Configuration.Config.Type">
            <summary>
            The data type of the value stored in the configuration element.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Configuration.Config.Value">
            <summary>
            The value stored in the configuration element
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Configuration.Config.SafeValue">
            <summary>
            The value stored in the configuration element, but without deserializing objects.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Configuration.Config.Unchanged">
            <summary>
            Whether the value of the configuration setting has been changed since its initialization.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.Config.Handler">
            <summary>
            The handler script that is run whenever the configuration value is set.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.Config.Validation">
            <summary>
            Validates the user input
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.Config.Hidden">
            <summary>
            Setting this to true will cause the element to not be discovered unless using the '-Force' parameter on "Get-DbaConfig"
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Configuration.Config.Initialized">
            <summary>
            Whether the setting has been initialized. This handles module imports and avoids modules overwriting settings when imported in multiple runspaces.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.Config.PolicySet">
            <summary>
            Whether this setting was set by policy
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Configuration.Config.PolicyEnforced">
            <summary>
            Whether this setting was set by policy and forbids changes to the configuration.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.Config.SimpleExport">
            <summary>
            Enabling this causes export to json to use simple json serialization for data transmission.
            This is suitable for simple data that is not sensitive to conversion losses.
            Simple export leads to exports more easily readable to the human eye.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.Config.ModuleExport">
            <summary>
            Whether this setting should be exported to a module specific file when exporting to json by modulename.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Configuration.Config.RegistryData">
            <summary>
            The finalized value to put into the registry value when using policy to set this setting.
            Deprecated property.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.Config.DefaultValue">
            <summary>
            The default value the configuration item was set to when initializing
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Configuration.Config.SetPersistedValue(Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType,System.String)">
            <summary>
            Applies the persisted value to the configuration item.
            This method should only be called by PSFramework internals
            </summary>
            <param name="Type">The type of data being specified</param>
            <param name="ValueString">The value string to register</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Configuration.Config.ResetValue">
            <summary>
            Resets the configuration value to its configured default value
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Configuration.ConfigScope">
            <summary>
            The location where a setting was applied
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigScope.UserDefault">
            <summary>
            The configuration is set as default value for the user
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigScope.UserMandatory">
            <summary>
            The configuration is enforced for the user
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigScope.SystemDefault">
            <summary>
            The configuration is set as default value for all users on the system
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigScope.SystemMandatory">
            <summary>
            The configuration is enforced for all users on the system.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigScope.FileUserLocal">
            <summary>
            The configuration is stored as Json in the per user local machine config directory.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigScope.FileUserShared">
            <summary>
            The configuration is stored as Json in the per user config directory shared across machines.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigScope.FileSystem">
            <summary>
            The configuration is stored as Json in the local computer config directory.
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Configuration.ConfigurationHost">
            <summary>
            Host class providing static configuration settings that are constant across all runspaces within the process.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationHost.Configurations">
            <summary>
            Hashtable containing all the configuration entries
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationHost.Validation">
            <summary>
            Hashtable containing all the registered validations
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationHost.ImportFromRegistryDone">
            <summary>
            Whether the import from registry has been completed. Prevents multiple imports and overwrites when importing the module multiple times.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Configuration.ConfigurationHost.ConvertToPersistedValue(System.Object)">
            <summary>
            Converts any object into its persisted state.
            </summary>
            <param name="Item">The item to convert.</param>
            <returns>Its persisted state representation.</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Configuration.ConfigurationHost.ConvertFromPersistedValue(System.String,Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType)">
            <summary>
            Converts a persisted value back to its original data type
            </summary>
            <param name="PersistedValue">The value in its persisted state</param>
            <param name="Type">The type of the persisted value</param>
            <returns>The natural state of the value originally persisted</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Configuration.ConfigurationHost.ConvertFromPersistedValue(System.String)">
            <summary>
            Converts a persisted value back to its original data type
            </summary>
            <param name="TypeQualifiedPersistedValue">The value in its persisted state, with a prefixed type identifier.</param>
            <returns>The natural state of the value originally persisted</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Configuration.ConfigurationHost.Utf8ToBase64(System.String)">
            <summary>
            Converts a plain text into a base64 string
            </summary>
            <param name="Value">The string to convert</param>
            <returns>base64 encoded version of string.</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Configuration.ConfigurationHost.Base64ToUtf8(System.String)">
            <summary>
            Converts a base64 encoded string into plain text
            </summary>
            <param name="Value">The string to convert</param>
            <returns>Plain Text string</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Configuration.ConfigurationValue">
            <summary>
            Contains all information about a configuration item's value
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Configuration.ConfigurationValue.Value">
            <summary>
            The runtime value of the setting.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Configuration.ConfigurationValue.PersistedValue">
            <summary>
            The value in its persisted state
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValue.PersistedType">
            <summary>
            The kind of 
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Configuration.ConfigurationValue.TypeQualifiedPersistedValue">
            <summary>
            The type qualified representation of the persisted value
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Configuration.ConfigurationValue.SafeValue">
            <summary>
            Ensures wanton Get-PSFConfig will not deserialize persisted objects that might have registered deserialization in their module.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValue._Value">
            <summary>
            Internal storage for the Value property
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValue._PersistedValue">
            <summary>
            Internal storage for the PersistedValue property
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Configuration.ConfigurationValue.ToString">
            <summary>
            The string representation of its actual value
            </summary>
            <returns>Returns the type-qualified string representation of its value</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Configuration.ConfigurationValue.#ctor(System.String,Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType)">
            <summary>
            Creates a value object from persisted data
            </summary>
            <param name="PersistedValue">The value that will be persisted</param>
            <param name="PersistedType">The type of the value to be persisted</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Configuration.ConfigurationValue.#ctor(System.Object)">
            <summary>
            Creates a value object from runtime data
            </summary>
            <param name="Value">The value that will be stored</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType">
            <summary>
            The data types supported by the configuration system.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType.Unknown">
            <summary>
            An unknown type, should be prevented
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType.Null">
            <summary>
            The value is as empty as the void.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType.Bool">
            <summary>
            The value is of a true/false kind
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType.Int">
            <summary>
            The value is a regular integer
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType.Double">
            <summary>
            The value is a double numeric value
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType.Long">
            <summary>
            The value is a long type
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType.String">
            <summary>
            The value is a common string
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType.Timespan">
            <summary>
            The value is a regular timespan
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType.Datetime">
            <summary>
            The value is a plain datetime
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType.ConsoleColor">
            <summary>
            The value is a fancy console color
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType.Array">
            <summary>
            The value is an array full of booty
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType.Hashtable">
            <summary>
            The value is a hashtable
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType.Object">
            <summary>
            The value is something indeterminate, but possibly complex
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Connection.ConnectionHost">
            <summary>
            Provides static tools for managing connections
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.Connections">
            <summary>
            List of all registered connections.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.BadConnectionTimeout">
            <summary>
            The time interval that must pass, before a connection using a known to not work connection protocol is reattempted
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.DisableCache">
            <summary>
            Globally disables all caching done by the Computer Management functions.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.DisableBadCredentialCache">
            <summary>
            Disables the caching of bad credentials. dbatools caches bad logon credentials for wmi/cim and will not reuse them.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.DisableCredentialAutoRegister">
            <summary>
            Disables the automatic registration of working credentials. dbatools will caches the last working credential when connecting using wmi/cim and will use those rather than using known bad credentials
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.OverrideExplicitCredential">
            <summary>
            Enabling this will force the use of the last credentials known to work, rather than even trying explicit credentials.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.EnableCredentialFailover">
            <summary>
            Enables automatic failover to working credentials, when passed credentials either are known, or turn out to not work.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.DisableCimPersistence">
            <summary>
            Globally disables the persistence of Cim sessions used to connect to a target system.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.DisableConnectionCimRM">
            <summary>
            Whether the CM connection using Cim over WinRM is disabled globally
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.DisableConnectionCimDCOM">
            <summary>
            Whether the CM connection using Cim over DCOM is disabled globally
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.DisableConnectionWMI">
            <summary>
            Whether the CM connection using WMI is disabled globally
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.DisableConnectionPowerShellRemoting">
            <summary>
            Whether the CM connection using PowerShell Remoting is disabled globally
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.SqlConnectionTimeout">
            <summary>
            The number of seconds before a sql connection attempt times out
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.PSSessions">
            <summary>
            List of all session containers used to maintain a cache
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ConnectionHost.PSSessionGet(System.Guid,System.String)">
            <summary>
            Returns a registered session for a given computer on a given runspace. Returns null if nothing is registered.
            </summary>
            <param name="Runspace">The host runspace that opened the session</param>
            <param name="ComputerName">The computer connected to</param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ConnectionHost.PSSessionSet(System.Guid,System.String,System.Management.Automation.Runspaces.PSSession)">
            <summary>
            Registeres a remote session under the owning runspace in its respective computer name
            </summary>
            <param name="Runspace">The runspace that owns the session</param>
            <param name="ComputerName">The computer the session connects to</param>
            <param name="Session">The session object</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ConnectionHost.PSSessionPurgeExpired">
            <summary>
            Searches the cache for an expired remoting session and purges it. After purging it from the list, it still needs to be closed!
            </summary>
            <returns>The session purged that then needs to be closed</returns>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.ConnectionHost.PSSessionCountExpired">
            <summary>
            The number of expired sessions 
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.PSSessionTimeout">
            <summary>
            The time until established connections will be considered expired (if available)
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.PSSessionCacheEnabled">
            <summary>
            Whether sessions should be cached at all
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Connection.ManagementConnection">
            <summary>
            Contains management connection information for a windows server
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.ManagementConnection.ComputerName">
            <summary>
            The computer to connect to
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.ManagementConnection.DisableBadCredentialCache">
            <summary>
            Locally disables the caching of bad credentials
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.ManagementConnection.DisableCredentialAutoRegister">
            <summary>
            Locally disables the caching of working credentials
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.ManagementConnection.OverrideExplicitCredential">
            <summary>
            Locally overrides explicit credentials with working ones that were cached
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.ManagementConnection.EnableCredentialFailover">
            <summary>
            Locally enables automatic failover to working credentials, when passed credentials either are known, or turn out to not work.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.ManagementConnection.DisableCimPersistence">
            <summary>
            Locally disables the persistence of Cim sessions used to connect to a target system.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.ManagementConnection.DisabledConnectionTypes">
            <summary>
            Connectiontypes that will never be used
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.RestoreDefaultConfiguration">
            <summary>
            Restores all deviations from public policy back to default
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnection.OverrideConnectionPolicy">
            <summary>
            Whether this connection adhers to the global connection lockdowns or not
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.ManagementConnection.CimRM">
            <summary>
            Did the last connection attempt using CimRM work?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnection.LastCimRM">
            <summary>
            When was the last connection attempt using CimRM?
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.ManagementConnection.CimDCOM">
            <summary>
            Did the last connection attempt using CimDCOM work?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnection.LastCimDCOM">
            <summary>
            When was the last connection attempt using CimRM?
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.ManagementConnection.Wmi">
            <summary>
            Did the last connection attempt using Wmi work?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnection.LastWmi">
            <summary>
            When was the last connection attempt using CimRM?
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.ManagementConnection.PowerShellRemoting">
            <summary>
            Did the last connection attempt using PowerShellRemoting work?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnection.LastPowerShellRemoting">
            <summary>
            When was the last connection attempt using CimRM?
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.ReportSuccess(Sqlcollaborative.Dbatools.Connection.ManagementConnectionType)">
            <summary>
            Report the successful connection against the computer of this connection
            </summary>
            <param name="Type">What connection type succeeded?</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.ReportFailure(Sqlcollaborative.Dbatools.Connection.ManagementConnectionType)">
            <summary>
            Report the failure of connecting to the target computer
            </summary>
            <param name="Type">What connection type failed?</param>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnection.Credentials">
            <summary>
            Any registered credentials to use on the connection.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnection.WindowsCredentialsAreBad">
            <summary>
            Whether the default windows credentials are known to not work against the target.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnection.UseWindowsCredentials">
            <summary>
            Whether windows credentials are known to be good. Do not build conditions on them being false, just on true.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnection.KnownBadCredentials">
            <summary>
            Credentials known to not work. They will not be used when specified.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.AddBadCredential(System.Management.Automation.PSCredential)">
            <summary>
            Adds a credentials object to the list of credentials known to not work.
            </summary>
            <param name="Credential">The bad credential that must be punished</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.AddGoodCredential(System.Management.Automation.PSCredential)">
            <summary>
            Reports a credentials object as being legit.
            </summary>
            <param name="Credential">The functioning credential that we may want to use again</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.GetCredential(System.Management.Automation.PSCredential)">
            <summary>
            Calculates, which credentials to use. Will consider input, compare it with know not-working credentials or use the configured working credentials for that.
            </summary>
            <param name="Credential">Any credential object a user may have explicitly specified.</param>
            <returns>The Credentials to use</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.IsBadCredential(System.Management.Automation.PSCredential)">
            <summary>
            Tests whether the input credential is on the list known, bad credentials
            </summary>
            <param name="Credential">The credential to test</param>
            <returns>True if the credential is known to not work, False if it is not yet known to not work</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.RemoveBadCredential(System.Management.Automation.PSCredential)">
            <summary>
            Removes an item from the list of known bad credentials
            </summary>
            <param name="Credential">The credential to remove</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.GetConnectionType(Sqlcollaborative.Dbatools.Connection.ManagementConnectionType,System.Boolean)">
            <summary>
            Returns the next connection type to try.
            </summary>
            <param name="ExcludedTypes">Exclude any type already tried and failed</param>
            <param name="Force">Overrides the timeout on bad connections</param>
            <returns>The next type to try.</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.GetConnectionTypesTimed(System.DateTime)">
            <summary>
            Returns a list of all available connection types whose inherent timeout has expired.
            </summary>
            <param name="Timestamp">All last connection failures older than this point in time are considered to be expired</param>
            <returns>A list of all valid connection types</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.GetConnectionTypesTimed(System.TimeSpan)">
            <summary>
            Returns a list of all available connection types whose inherent timeout has expired.
            </summary>
            <param name="Timespan">All last connection failures older than this far back into the past are considered to be expired</param>
            <returns>A list of all valid connection types</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.#ctor">
            <summary>
            Creates a new, empty connection object. Necessary for serialization.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.#ctor(System.String)">
            <summary>
            Creates a new default connection object, containing only its computer's name and default results.
            </summary>
            <param name="ComputerName">The computer targeted. Will be forced to lowercase.</param>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.ManagementConnection.CimWinRMOptions">
            <summary>
            The options ot use when establishing a CIM Session
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.GetDefaultCimWsmanOptions">
            <summary>
            Returns the default wsman options object
            </summary>
            <returns>Something very default-y</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.GetCimRMInstance(System.Management.Automation.PSCredential,System.String,System.String)">
            <summary>
            Get all cim instances of the appropriate class using WinRM
            </summary>
            <param name="Credential">The credentiuls to use for the connection.</param>
            <param name="Class">The class to query.</param>
            <param name="Namespace">The namespace to look in (defaults to root\cimv2).</param>
            <returns>Hopefully a mountainload of CimInstances</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.QueryCimRMInstance(System.Management.Automation.PSCredential,System.String,System.String,System.String)">
            <summary>
            Get all cim instances matching the query using WinRM
            </summary>
            <param name="Credential">The credentiuls to use for the connection.</param>
            <param name="Query">The query to use requesting information.</param>
            <param name="Dialect">Defaults to WQL.</param>
            <param name="Namespace">The namespace to look in (defaults to root\cimv2).</param>
            <returns></returns>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.ManagementConnection.CimDComOptions">
            <summary>
            The options ot use when establishing a CIM Session
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.GetDefaultCimDcomOptions">
            <summary>
            Returns the default DCom options object
            </summary>
            <returns>Something very default-y</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.GetCimDComInstance(System.Management.Automation.PSCredential,System.String,System.String)">
            <summary>
            Get all cim instances of the appropriate class using DCOM
            </summary>
            <param name="Credential">The credentiuls to use for the connection.</param>
            <param name="Class">The class to query</param>
            <param name="Namespace">The namespace to look in (defaults to root\cimv2)</param>
            <returns>Hopefully a mountainload of CimInstances</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.QueryCimDCOMInstance(System.Management.Automation.PSCredential,System.String,System.String,System.String)">
            <summary>
            Get all cim instances matching the query using DCOM
            </summary>
            <param name="Credential">The credentiuls to use for the connection.</param>
            <param name="Query">The query to use requesting information.</param>
            <param name="Dialect">Defaults to WQL.</param>
            <param name="Namespace">The namespace to look in (defaults to root\cimv2).</param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.ToString">
            <summary>
            Simple string representation
            </summary>
            <returns>Returns the computerName it is connection for</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Connection.ManagementConnectionProtocolState">
            <summary>
            The various types of state a connection-protocol may have
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnectionProtocolState.Unknown">
            <summary>
            The default initial state, before any tests are performed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnectionProtocolState.Success">
            <summary>
            A successful connection was last established
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnectionProtocolState.Error">
            <summary>
            Connecting using the relevant protocol failed last it was tried
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnectionProtocolState.Disabled">
            <summary>
            The relevant protocol has been disabled and should not be used
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Connection.ManagementConnectionType">
            <summary>
            The various ways to connect to a windows server fopr management purposes.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnectionType.None">
            <summary>
            No Connection-Type
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnectionType.CimRM">
            <summary>
            Cim over a WinRM connection
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnectionType.CimDCOM">
            <summary>
            Cim over a DCOM connection
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnectionType.Wmi">
            <summary>
            WMI Connection
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnectionType.PowerShellRemoting">
            <summary>
            Connecting with PowerShell remoting and performing WMI queries locally
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Connection.PSSessionContainer">
            <summary>
            The container that lists all sessions for a given runspace
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.PSSessionContainer.Runspace">
            <summary>
            The runspace that owns the sessions
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.PSSessionContainer.CountExpired">
            <summary>
            The count of expired sessions registered
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.PSSessionContainer.Sessions">
            <summary>
            List of sessions and their associated computer names
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.PSSessionContainer.ConnectionTimestamps">
            <summary>
            List of timestamps, when the last command was run against them
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.PSSessionContainer.#ctor(System.Guid)">
            <summary>
            Creates a list of sessions the current runspace is connected to.
            </summary>
            <param name="Runspace">The Guid of the runspace that is the owner of the registered sessions</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.PSSessionContainer.Get(System.String)">
            <summary>
            Returns the requested session.
            </summary>
            <param name="ComputerName">The name of the host whose connection to retrieve</param>
            <returns>The established connection to the host, null if none exists.</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.PSSessionContainer.Set(System.String,System.Management.Automation.Runspaces.PSSession)">
            <summary>
            Sets a session and writes its timestamp to the cache
            </summary>
            <param name="ComputerName">The hostname it connects to.</param>
            <param name="Session">The session that is being registered.</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.PSSessionContainer.GetExpiredNames">
            <summary>
            Returns the name of hostnames with expired sessions
            </summary>
            <returns>THe hostnames whose session has expired</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.PSSessionContainer.PurgeExpiredSession">
            <summary>
            Removes an expired session from the cache, an returns it, so it can be properly closed.
            </summary>
            <returns>Returns a session to disconnect</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Connection.SqlConnectionProtocol">
            <summary>
            The protocol to connect over via SMO
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.SqlConnectionProtocol.Any">
            <summary>
            Connect using any protocol available
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.SqlConnectionProtocol.TCP">
            <summary>
            Connect using TCP/IP
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.SqlConnectionProtocol.NP">
            <summary>
            Connect using named pipes or shared memory
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Database.BackupHistory">
            <summary>
            Object containing the information about the history of mankind ... or a database backup. WHo knows.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.ComputerName">
            <summary>
            The name of the computer running MSSQL Server
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.InstanceName">
            <summary>
            The Instance that was queried
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.SqlInstance">
            <summary>
            The full Instance name as seen from outside
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.Database">
            <summary>
            The Database that was backed up
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.UserName">
            <summary>
            The user that is running the backup
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.Start">
            <summary>
            When was the backup started
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.End">
            <summary>
            When did the backup end
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.Duration">
            <summary>
            What was the longest duration among the backups
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.Path">
            <summary>
            Where is the backup stored
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.TotalSize">
            <summary>
            What is the total size of the backup
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.CompressedBackupSize">
            <summary>
            What is the total compressesed size of the backup
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.CompressionRatio">
            <summary>
            What is the ratio of total size to compressed size of the backup
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.Type">
            <summary>
            The kind of backup this was
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.BackupSetId">
            <summary>
            The ID for the Backup job
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.DeviceType">
            <summary>
            What kind of backup-device was the backup stored to
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.Software">
            <summary>
            What is the name of the backup software?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.FullName">
            <summary>
            The full name of the backup
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.FileList">
            <summary>
            The files that are part of this backup
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.Position">
            <summary>
            The position of the backup
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.FirstLsn">
            <summary>
            The first Log Sequence Number
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.DatabaseBackupLsn">
            <summary>
            The Log Squence Number that marks the beginning of the backup
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.CheckpointLsn">
            <summary>
            The checkpoint's Log Sequence Number
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.LastLsn">
            <summary>
            The last Log Sequence Number
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.SoftwareVersionMajor">
            <summary>
            The primary version number of the Sql Server
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.IsCopyOnly">
            <summary>
            Was the backup performed with the CopyOnlyOption
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.LastRecoveryForkGUID">
            <summary>
            Recovery Fork backup was takeon
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.RecoveryModel">
            <summary>
            Recovery Model of the database when backup was taken
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Database.Dependency">
            <summary>
            Class containing all dependency information over a database object
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.Dependency.ComputerName">
            <summary>
            The name of the SQL server from whence the query came
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.Dependency.ServiceName">
            <summary>
            Name of the service running the database containing the dependency
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.Dependency.SqlInstance">
            <summary>
            The Instance the database containing the dependency is running in.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.Dependency.Dependent">
            <summary>
            The name of the dependent
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.Dependency.Type">
            <summary>
            The kind of object the dependent is
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.Dependency.Owner">
            <summary>
            The owner of the dependent (usually the Database)
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.Dependency.IsSchemaBound">
            <summary>
            Whether the dependency is Schemabound. If it is, then the creation statement order is of utmost importance.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.Dependency.Parent">
            <summary>
            The immediate parent of the dependent. Useful in multi-tier dependencies.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.Dependency.ParentType">
            <summary>
            The type of object the immediate parent is.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.Dependency.Script">
            <summary>
            The script used to create the object.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.Dependency.Tier">
            <summary>
            The tier in the dependency hierarchy tree. Used to determine, which dependency must be applied in which order.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.Dependency.Object">
            <summary>
            The smo object of the dependent.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.Dependency.Urn">
            <summary>
            The Uniform Resource Name of the dependent.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.Dependency.OriginalResource">
            <summary>
            The object of the original resource, from which the dependency hierachy has been calculated.
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord">
            <summary>
            An error record written by dbatools
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord.CategoryInfo">
            <summary>
            The category of the error
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord.ErrorDetails">
            <summary>
            The details on the error
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord.Exception">
            <summary>
            The actual exception thrown
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord.FullyQualifiedErrorId">
            <summary>
            The specific error identity, used to identify the target
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord.InvocationInfo">
            <summary>
            The details of how this was called.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord.ScriptStackTrace">
            <summary>
            The script's stacktrace
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord.TargetObject">
            <summary>
            The object being processed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord.FunctionName">
            <summary>
            The name of the function throwing the error
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord.Timestamp">
            <summary>
            When was the error thrown
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord.Message">
            <summary>
            The message that was written in a userfriendly manner
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord.Runspace">
            <summary>
            The runspace the error occured on.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord.#ctor">
            <summary>
            Create an empty record
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord.#ctor(System.Management.Automation.ErrorRecord,System.String,System.DateTime,System.String)">
            <summary>
            Create a filled out error record
            </summary>
            <param name="Record">The original error record</param>
            <param name="FunctionName">The function that wrote the error</param>
            <param name="Timestamp">When was the error generated</param>
            <param name="Message">What message was passed when writing the error</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord.#ctor(System.Management.Automation.ErrorRecord,System.String,System.DateTime,System.String,System.Guid)">
            <summary>
            Create a filled out error record
            </summary>
            <param name="Record">The original error record</param>
            <param name="FunctionName">The function that wrote the error</param>
            <param name="Timestamp">When was the error generated</param>
            <param name="Message">What message was passed when writing the error</param>
            <param name="Runspace">The ID of the runspace writing the error. Used to separate output between different runspaces in the same process.</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.dbaSystem.DebugHost">
            <summary>
            Hosts static debugging values and methods
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.DebugHost.ImportTimeEntries">
            <summary>
            Lists the duration for the last import of dbatools.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.dbaSystem.DebugHost.ImportTime">
            <summary>
            Returns the calculated time each phase took during the last import of dbatool.
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.dbaSystem.StartTimeEntry">
            <summary>
            Entry containing the information of a step during the import sequence
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.dbaSystem.StartTimeEntry.Action">
            <summary>
            The action that has been taken
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.dbaSystem.StartTimeEntry.Timestamp">
            <summary>
            When was the action taken?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.StartTimeEntry.Runspace">
            <summary>
            The runspace the entry was written on
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.dbaSystem.StartTimeEntry.#ctor(System.String,System.DateTime,System.Guid)">
            <summary>
            Creates a new StartTimeEntry
            </summary>
            <param name="Action">The action that has been taken</param>
            <param name="Timestamp">When was the action taken?</param>
            <param name="Runspace">The runspace the entry was written on</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.dbaSystem.StartTimeResult">
            <summary>
            The processed result how long a given step took
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.dbaSystem.StartTimeResult.Action">
            <summary>
            What action was taken?
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.dbaSystem.StartTimeResult.Duration">
            <summary>
            How long did things take?
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.dbaSystem.StartTimeResult.Start">
            <summary>
            When did this action start?
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.dbaSystem.StartTimeResult.End">
            <summary>
            When did this action end?
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.dbaSystem.StartTimeResult.#ctor(System.String,System.DateTime,System.DateTime)">
            <summary>
            Creates a new StartTimeResult with all values preconfigured
            </summary>
            <param name="Action">The action that was taken</param>
            <param name="Start">When did the action start?</param>
            <param name="End">When did the action end?</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.dbaSystem.SystemHost">
            <summary>
            Provides system-wide static resources regarding the dbatools system runtime in general
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.SystemHost.UnattendedMode">
            <summary>
            When this is set to true, functions must assume dbatools is in unattended mode. May not ask for user input of any kind.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.dbaSystem.SystemHost.ModuleBase">
            <summary>
            Path where the module was located when imported
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.SystemHost.ModuleImported">
            <summary>
            Flag whether the module has ever been imported in the current process. If that is true, several things (such as importing libraries) is no longer necessary and will be skipped on import.
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Discovery.DbaBrowserReply">
            <summary>
            The reply the browser service gave
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaBrowserReply.MachineName">
            <summary>
            The machine name of the computer
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaBrowserReply.ComputerName">
            <summary>
            the computername of the computer
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaBrowserReply.SqlInstance">
            <summary>
            The instance running on the computer
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaBrowserReply.InstanceName">
            <summary>
            The name of the instance, running on the computer
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaBrowserReply.TCPPort">
            <summary>
            The port number the instance is running under
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaBrowserReply.Version">
            <summary>
            The version of the SQL Server
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaBrowserReply.IsClustered">
            <summary>
            Whether the instance is part of a cluster or no.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Discovery.DbaBrowserReply.ToString">
            <summary>
            Override in order to make it look neater in PowerShell
            </summary>
            <returns></returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Discovery.DbaInstanceAvailability">
            <summary>
            Indiciator for whether an instance is known to be available or not
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceAvailability.Unknown">
            <summary>
            It is not known, whether the instance is available or not
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceAvailability.Available">
            <summary>
            The instance is known to be available
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceAvailability.Unavailable">
            <summary>
            The instance is known to be not available
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Discovery.DbaInstanceConfidenceLevel">
            <summary>
            How high is our confidence that this is a valid instance?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceConfidenceLevel.None">
            <summary>
            No confidence at all. There is virtually no way for this to be an instance
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceConfidenceLevel.Low">
            <summary>
            We have a few indications, but couldn't follow them up
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceConfidenceLevel.Medium">
            <summary>
            We're fairly sure this is legit, but can't guarantee it
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceConfidenceLevel.High">
            <summary>
            This absolutely is an instance
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Discovery.DbaInstanceDiscoveryType">
            <summary>
            What discovery mechanisms to use
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceDiscoveryType.IPRange">
            <summary>
            We shall sweep the network for instances, by targeting every IP within a range.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceDiscoveryType.Domain">
            <summary>
            We shall search for SQL SPNs in active directory
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceDiscoveryType.DataSourceEnumeration">
            <summary>
            We shall use the SSMS Data Sizrce Enumeration mechanism and hope for the best
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceDiscoveryType.All">
            <summary>
            We shall use all tools in our control to find stuff
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport">
            <summary>
            The report on a discovered instance
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.MachineName">
            <summary>
            The computername of the underlying machine. Usually equal to the computername, but may differ in case of clusters
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.ComputerName">
            <summary>
            The computername of the target
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.InstanceName">
            <summary>
            The name of the instance
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.FullName">
            <summary>
            The full server instance name
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.SqlInstance">
            <summary>
            The full name usable to connect via SMO
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.Port">
            <summary>
            The port number the server listens on
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.Timestamp">
            <summary>
            When the scan was concluded
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.TcpConnected">
            <summary>
            Was a TCP connect successful?
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.SqlConnected">
            <summary>
            Was a connection via SQL successful (even if we got access denied)
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.DnsResolution">
            <summary>
            The DNS Resolution object
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.Ping">
            <summary>
            The ping resolution object
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.BrowseReply">
            <summary>
            The reply received from the browse request
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.Services">
            <summary>
            The windows services for the instance
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.SystemServices">
            <summary>
            The SQL Server services that do not belong to that instance alone
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.SPNs">
            <summary>
            Service Principal Names found
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.PortsScanned">
            <summary>
            The ports that have been scanned
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.Availability">
            <summary>
            What we know about its availability
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.Confidence">
            <summary>
            How confident we are, that this is a real instance
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.ScanTypes">
            <summary>
            What we used to scan the instance
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Discovery.DbaInstanceScanType">
            <summary>
            The mechanisms we use to determine, whether a given host contains a legit instance
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceScanType.TCPPort">
            <summary>
            Try connecting to specific ports
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceScanType.SqlConnect">
            <summary>
            Try to connect to discovered instances (improves confidence)
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceScanType.SqlService">
            <summary>
            Check the windows services on the target
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceScanType.DNSResolve">
            <summary>
            Try resolving a computername in DNS
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceScanType.SPN">
            <summary>
            Scan the SPNs for the targeted computer
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceScanType.Browser">
            <summary>
            Try contacting the local browser service and demand answers
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceScanType.Ping">
            <summary>
            See whether you can ping the host
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceScanType.All">
            <summary>
            Do EVERYTHING
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceScanType.Default">
            <summary>
            Do all the things we consider sane defaults
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Discovery.DbaPortReport">
            <summary>
            We tried to connect to a port, how did it go?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaPortReport.ComputerName">
            <summary>
            The name of the computer connected to
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaPortReport.Port">
            <summary>
            The number of the port we tried to connect to.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaPortReport.IsOpen">
            <summary>
            Whether the port was open
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Discovery.DbaPortReport.#ctor">
            <summary>
            Creates an empty report (serialization uses this)
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Discovery.DbaPortReport.#ctor(System.String,System.Int32,System.Boolean)">
            <summary>
            Creates a filled in report
            </summary>
            <param name="ComputerName">The name of the computer connected to</param>
            <param name="Port">The port we tried to connect to</param>
            <param name="IsOpen">Whether things worked out</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Discovery.DbaPortReport.ToString">
            <summary>
            Displays port connection reports in a user friendly manner
            </summary>
            <returns></returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Exceptions.BloodyHellGiveMeSomethingToWorkWithException">
            <summary>
            An exception that is thrown by parameter classes when given empty input
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Exceptions.BloodyHellGiveMeSomethingToWorkWithException.ParameterClass">
            <summary>
            The parameter class that did the throwing
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Exceptions.BloodyHellGiveMeSomethingToWorkWithException.#ctor(System.String,System.Exception)">
            <summary>
            Creates an exception with a message and a nested exception
            </summary>
            <param name="Message">The message to tell</param>
            <param name="Inner">The inner exception to nest</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Exceptions.BloodyHellGiveMeSomethingToWorkWithException.#ctor(System.String,System.String)">
            <summary>
            Creates an exception with a message and a ParameterClass
            </summary>
            <param name="Message">The message to tell</param>
            <param name="ParameterClass">The Parameter Class that threw the exception</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Exceptions.BloodyHellGiveMeSomethingToWorkWithException.#ctor(System.String,System.Exception,System.String)">
            <summary>
            Creates an exception with a message, a nested exception and a ParameterClass
            </summary>
            <param name="Message">The message to tell</param>
            <param name="Inner">The inner exception to nest</param>
            <param name="ParameterClass">The Parameter Class that threw the exception</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.General.ExecutionMode">
            <summary>
            What kind of mode do you want to run a command in?
            This allows the user to choose how a dbatools function handles a bump in the execution where terminating directly may not be actually mandated.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.General.ExecutionMode.Strict">
            <summary>
            When encountering issues, terminate, or skip the currently processed input, rather than continue.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.General.ExecutionMode.Lazy">
            <summary>
            Continue as able with a best-effort attempt. Simple verbose output should do the rest.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.General.ExecutionMode.Report">
            <summary>
            Continue, but provide output that can be used to identify the operations that had issues.
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Maintenance.MaintenanceHost">
            <summary>
            Host class providing access to resources need to perform dbatools maintenance
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Maintenance.MaintenanceHost.Tasks">
            <summary>
            The register of available tasks.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Maintenance.MaintenanceHost.HasDueTasks">
            <summary>
            Whether there are any due tasks
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Maintenance.MaintenanceHost.GetNextTask(System.String[])">
            <summary>
            Returns the next task to perform. Returns null when there are no more tasks to perform
            </summary>
            <param name="Exclusions">List of tasks not to return, even if they are ready to execute again. This avoids one misconfigured task starving all lower priority tasks</param>
            <returns>The next task to perform.</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Maintenance.MaintenancePriority">
            <summary>
            How high the priority of the task. Higher priority tasks take precedence over low priority tasks.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Maintenance.MaintenancePriority.Trivial">
            <summary>
            This task is completely trivial and can be done whenever there is some spare time for it
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Maintenance.MaintenancePriority.Low">
            <summary>
            The task is not very significant, but should be dealt with at some point
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Maintenance.MaintenancePriority.Medium">
            <summary>
            Average priority task
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Maintenance.MaintenancePriority.High">
            <summary>
            An important task that will take precedence over most other tasks
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Maintenance.MaintenancePriority.Critical">
            <summary>
            A task so critical, that it should be considered to move it to synchronous execution instead.
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Maintenance.MaintenanceTask">
            <summary>
            An individual task assigned to the maintenance engine
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Maintenance.MaintenanceTask.Name">
            <summary>
            The name of the task to execute. No duplciates are possible.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Maintenance.MaintenanceTask.Once">
            <summary>
            Whether the task should be done once only
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Maintenance.MaintenanceTask.Interval">
            <summary>
            The interval at which the task should be performed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Maintenance.MaintenanceTask.Delay">
            <summary>
            If the task need not be performed right away, it can be delayed, in order to prioritize more important initialization tasks
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Maintenance.MaintenanceTask.Registered">
            <summary>
            When was the task first registered. Duplicate registration calls will not increment this value.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Maintenance.MaintenanceTask.LastExecution">
            <summary>
            When was the task last executed.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Maintenance.MaintenanceTask.Priority">
            <summary>
            How important is this task?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Maintenance.MaintenanceTask.ScriptBlock">
            <summary>
            The task code to execute
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Maintenance.MaintenanceTask.IsDue">
            <summary>
            Whether the task is due and should be executed
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Message.DbatoolsException">
            <summary>
            Wrapper class that can emulate any exception for purpose of serialization without blowing up the storage space consumed
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.DbatoolsException.GetException">
            <summary>
            Returns the original exception object that we interpreted. This is on purpose not a property, as we want to avoid messing with serialization size.
            </summary>
            <returns>The original exception that got thrown</returns>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.Message">
            <summary>
            The actual Exception Message
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.Source">
            <summary>
            The original source of the Exception
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.StackTrace">
            <summary>
            Where on the callstack did the exception occur?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.TargetSite">
            <summary>
            What was the target site on the code that caused it. This property has been altered to avoid export issues, if a string representation is not sufficient, access the original exception using GetException()
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.HResult">
            <summary>
            The HResult of the exception. Useful in debugging native code errors.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.HelpLink">
            <summary>
            Link to a proper help article.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.Data">
            <summary>
            Additional data that has been appended
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.InnerException">
            <summary>
            The inner exception in a chain of exceptions.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.ExceptionTypeName">
            <summary>
            The full namespace name of the exception that has been wrapped.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.ExceptionData">
            <summary>
            Contains additional properties other exceptions might contain.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.CategoryInfo">
            <summary>
            The category of the error
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.ErrorDetails">
            <summary>
            The details on the error
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.FullyQualifiedErrorId">
            <summary>
            The specific error identity, used to identify the target
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.InvocationInfo">
            <summary>
            The details of how this was called.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.ScriptStackTrace">
            <summary>
            The script's stacktrace
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.TargetObject">
            <summary>
            The object being processed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.FunctionName">
            <summary>
            The name of the function throwing the error
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.Timestamp">
            <summary>
            When was the error thrown
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.Runspace">
            <summary>
            The runspace the error occured on.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.ComputerName">
            <summary>
            The computer the error occured on.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.DbatoolsException.#ctor">
            <summary>
            Creates an empty exception object. Mostly for serialization support
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.DbatoolsException.#ctor(System.Exception)">
            <summary>
            Creates an exception based on an original exception object
            </summary>
            <param name="Except">The exception to wrap around</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.DbatoolsException.#ctor(System.Management.Automation.ErrorRecord)">
            <summary>
            Creates a rich information exception object based on a full error record as recorded by PowerShell
            </summary>
            <param name="Record">The error record to copy from</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.DbatoolsException.#ctor(System.Exception,System.String,System.DateTime,System.String,System.Guid,System.String)">
            <summary>
            Creates a new exception object with rich meta information from the PowerShell runtime.
            </summary>
            <param name="Except">The exception thrown</param>
            <param name="FunctionName">The name of the function in which the error occured</param>
            <param name="Timestamp">When did the error occur</param>
            <param name="Message">The message to add to the exception</param>
            <param name="Runspace">The ID of the runspace from which the exception was thrown. Useful in multi-runspace scenarios.</param>
            <param name="ComputerName">The computer the error occured on.</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.DbatoolsException.#ctor(System.Management.Automation.ErrorRecord,System.String,System.DateTime,System.String,System.Guid,System.String)">
            <summary>
            Creates a new exception object with rich meta information from the PowerShell runtime.
            </summary>
            <param name="Record">The error record written</param>
            <param name="FunctionName">The name of the function in which the error occured</param>
            <param name="Timestamp">When did the error occur</param>
            <param name="Message">The message to add to the exception</param>
            <param name="Runspace">The ID of the runspace from which the exception was thrown. Useful in multi-runspace scenarios.</param>
            <param name="ComputerName">The computer the error occured on.</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.DbatoolsException.ToString">
            <summary>
            Returns a string representation of the exception.
            </summary>
            <returns></returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Message.DbatoolsExceptionRecord">
            <summary>
            Carrier class, designed to hold an arbitrary number of exceptions. Used for exporting to XML in nice per-incident packages.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsExceptionRecord.Runspace">
            <summary>
            Runspace where shit happened.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsExceptionRecord.ComputerName">
            <summary>
            The computer name the exception was written on
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsExceptionRecord.Timestamp">
            <summary>
            When did things go bad?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsExceptionRecord.FunctionName">
            <summary>
            Name of the function, where fail happened.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsExceptionRecord.ModuleName">
            <summary>
            The module of the function where fail happened
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsExceptionRecord.Tags">
            <summary>
            The tags that were applied to the failure
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsExceptionRecord.Message">
            <summary>
            The message the poor user was shown.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.DbatoolsExceptionRecord.ExceptionType">
            <summary>
            Displays the name of the exception, the make scanning exceptions easier.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.DbatoolsExceptionRecord.TargetObject">
            <summary>
            The target object of the first exception in the list, if any
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsExceptionRecord.Exceptions">
            <summary>
            List of Exceptions that are part of the incident (usually - but not always - only one).
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.DbatoolsExceptionRecord.#ctor">
            <summary>
            Creates an empty container. Ideal for the homeworker who loves doing it all himself.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.DbatoolsExceptionRecord.#ctor(Sqlcollaborative.Dbatools.Message.DbatoolsException)">
            <summary>
            Creates a container filled with the first exception.
            </summary>
            <param name="Exception"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.DbatoolsExceptionRecord.#ctor(System.Guid,System.String,System.DateTime,System.String,System.String,System.Collections.Generic.List{System.String},System.String)">
            <summary>
            Creates a container filled with the meta information but untouched by exceptions
            </summary>
            <param name="Runspace">The runspace where it all happened</param>
            <param name="ComputerName">The computer the error was recorded</param>
            <param name="Timestamp">When did it happen?</param>
            <param name="FunctionName">Where did it happen?</param>
            <param name="ModuleName">The name of the module where fail happened</param>
            <param name="Tags">The tags that were assigned to the failure</param>
            <param name="Message">What did the witness have to say?</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Message.LogEntry">
            <summary>
            An individual entry for the message log
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntry.Message">
            <summary>
            The message logged
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntry.Type">
            <summary>
            What kind of entry was this?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntry.Timestamp">
            <summary>
            When was the message logged?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntry.FunctionName">
            <summary>
            What function wrote the message
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntry.ModuleName">
            <summary>
            The name of the module of the function that wrote the message
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntry.Tags">
            <summary>
            The tags applied to the message
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntry.Level">
            <summary>
            What level was the message?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntry.Runspace">
            <summary>
            What runspace was the message written from?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntry.ComputerName">
            <summary>
            The computer the message was generated on
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntry.TargetObject">
            <summary>
            The object that was the focus of this message.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntry.File">
            <summary>
            The file from which the message was written.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntry.Line">
            <summary>
            The line on which the message was written.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntry.CallStack">
            <summary>
            The callstack when the message was written.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntry.Username">
            <summary>
            The user that did the writing.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.LogEntry.#ctor">
            <summary>
            Creates an empty log entry
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.LogEntry.#ctor(System.String,Sqlcollaborative.Dbatools.Message.LogEntryType,System.DateTime,System.String,System.String,System.Collections.Generic.List{System.String},Sqlcollaborative.Dbatools.Message.MessageLevel,System.Guid,System.String,System.Object,System.String,System.Int32,System.Collections.Generic.IEnumerable{System.Management.Automation.CallStackFrame},System.String)">
            <summary>
            Creates a filled out log entry
            </summary>
            <param name="Message">The message that was logged</param>
            <param name="Type">The type(s) of message written</param>
            <param name="Timestamp">When was the message logged</param>
            <param name="FunctionName">What function wrote the message</param>
            <param name="ModuleName">Name of the module the function writing this message came from</param>
            <param name="Tags">Tags that were applied to the message</param>
            <param name="Level">What level was the message written at.</param>
            <param name="Runspace">The ID of the runspace that wrote the message.</param>
            <param name="ComputerName">The computer the message was generated on.</param>
            <param name="TargetObject">The object this message was all about.</param>
            <param name="File">The file of the code that wrote the message.</param>
            <param name="Line">The line on which the message was written.</param>
            <param name="CallStack">The callstack that triggered the write.</param>
            <param name="Username">The user responsible for running the code that is writing the message.</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Message.LogEntryType">
            <summary>
            The kind of information the logged entry was.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntryType.None">
            <summary>
            This entry wasn't written to any stream
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntryType.Information">
            <summary>
            A message that was written to the current host equivalent, if available also to the information stream
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntryType.Verbose">
            <summary>
            A message that was written to the verbose stream
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntryType.Debug">
            <summary>
            A message that was written to the Debug stream
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntryType.Warning">
            <summary>
            A message written to the warning stream
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Message.LogHost">
            <summary>
            Provides static information storage for logging related settings, as well as housing the logging queues.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogHost.MaxErrorCount">
            <summary>
            The maximum numbers of error records maintained in-memory.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogHost.MaxMessageCount">
            <summary>
            The maximum number of messages that can be maintained in the in-memory message queue
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogHost.MaxMessagefileBytes">
            <summary>
            The maximum size of a given logfile. When reaching this limit, the file will be abandoned and a new log created. Set to 0 to not limit the size.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogHost.MaxMessagefileCount">
            <summary>
            The maximum number of logfiles maintained at a time. Exceeding this number will cause the oldest to be culled. Set to 0 to disable the limit.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogHost.MaxErrorFileBytes">
            <summary>
            The maximum size all error files combined may have. When this number is exceeded, the oldest entry is culled.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogHost.MaxTotalFolderSize">
            <summary>
            This is the upper limit of length all items in the log folder may have combined across all processes.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogHost.LoggingPath">
            <summary>
            Path to where the logfiles live.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogHost.MaxLogFileAge">
            <summary>
            Any logfile older than this will automatically be cleansed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogHost.MessageLogFileEnabled">
            <summary>
            Governs, whether a log file for the system messages is written
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogHost.MessageLogEnabled">
            <summary>
            Governs, whether a log of recent messages is kept in memory
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogHost.ErrorLogFileEnabled">
            <summary>
            Governs, whether log files for errors are written
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogHost.ErrorLogEnabled">
            <summary>
            Governs, whether a log of recent errors is kept in memory
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogHost.OutQueueError">
            <summary>
            The outbound queue for errors. These will be processed and written to xml
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogHost.OutQueueLog">
            <summary>
            The outbound queue for logs. These will be processed and written to logfile
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.LogHost.GetErrors">
            <summary>
            Retrieves a copy of the Error stack
            </summary>
            <returns>All errors thrown by functions using the message or flowcontrol system</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.LogHost.GetLog">
            <summary>
            Retrieves a copy of the message log
            </summary>
            <returns>All messages logged this session.</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.LogHost.WriteErrorEntry(System.Management.Automation.ErrorRecord[],System.String,System.String,System.Collections.Generic.List{System.String},System.DateTime,System.String,System.Guid,System.String)">
            <summary>
            Write an error record to the log
            </summary>
            <param name="Record">The actual error record as powershell wrote it</param>
            <param name="FunctionName">The name of the function writing the error</param>
            <param name="ModuleName">The name of the module the function writing the error came from</param>
            <param name="Tags">The tags that were assigned to the error event</param>
            <param name="Timestamp">When was the error written</param>
            <param name="Message">What message was passed to the user</param>
            <param name="Runspace">The runspace the message was written from</param>
            <param name="ComputerName">The computer the error was written on</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.LogHost.WriteLogEntry(System.String,Sqlcollaborative.Dbatools.Message.LogEntryType,System.DateTime,System.String,System.String,System.Collections.Generic.List{System.String},Sqlcollaborative.Dbatools.Message.MessageLevel,System.Guid,System.String,System.String,System.Int32,System.Collections.Generic.IEnumerable{System.Management.Automation.CallStackFrame},System.String,System.Object)">
            <summary>
            Write a new entry to the log
            </summary>
            <param name="Message">The message to log</param>
            <param name="Type">The type of the message logged</param>
            <param name="Timestamp">When was the message generated</param>
            <param name="FunctionName">What function wrote the message</param>
            <param name="ModuleName">What module did the function writing this message come from?</param>
            <param name="Tags">The tags that were applied to the message</param>
            <param name="Level">At what level was the function written</param>
            <param name="Runspace">The runspace the message is coming from</param>
            <param name="ComputerName">The computer the message was generated on</param>
            <param name="File">The file from which the message was written</param>
            <param name="Line">The line on which the message was written</param>
            <param name="TargetObject">The object associated with a given message.</param>
            <param name="CallStack">The callstack at the moment the message was written.</param>
            <param name="Username">The name of the user under which the code being executed</param>
            <returns>The entry that is being written</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Message.MessageEventSubscription">
            <summary>
            Condition and logic to be executed on message events
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.Name">
            <summary>
            Name of the event subscription, must be unique.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.ScriptBlock">
            <summary>
            Scriptblock to execute if the condition is met
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageEventSubscription._MessageFilter">
            <summary>
            The internally stored filter value for Message
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.MessageFilter">
            <summary>
            The value the Message is filtered by
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.MessageFilterSet">
            <summary>
            Whether filtering by Message was enabled
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageEventSubscription._ModuleNameFilter">
            <summary>
            The internally stored filter value for ModuleName
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.ModuleNameFilter">
            <summary>
            The value the ModuleName is filtered by
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.ModuleNameFilterSet">
            <summary>
            Whether filtering by ModuleName was enabled
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageEventSubscription._FunctionNameFilter">
            <summary>
            The internally stored filter value for FunctionName
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.FunctionNameFilter">
            <summary>
            The value the FunctionName is filtered by
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.FunctionNameFilterSet">
            <summary>
            Whether filtering by FunctionName was enabled
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageEventSubscription._TargetFilter">
            <summary>
            The internally stored filter value for Target
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.TargetFilter">
            <summary>
            The value the Target is filtered by
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.TargetFilterSet">
            <summary>
            Whether filtering by Target was enabled
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageEventSubscription._LevelFilter">
            <summary>
            The internally stored filter value for Level
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.LevelFilter">
            <summary>
            The value the Level is filtered by
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.LevelFilterSet">
            <summary>
            Whether filtering by Level was enabled
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageEventSubscription._TagFilter">
            <summary>
            The internally stored filter value for Tag
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.TagFilter">
            <summary>
            The value the Tag is filtered by
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.TagFilterSet">
            <summary>
            Whether filtering by Tag was enabled
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageEventSubscription._RunspaceFilter">
            <summary>
            The internally stored filter value for Runspace
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.RunspaceFilter">
            <summary>
            The value the Runspace is filtered by
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.RunspaceFilterSet">
            <summary>
            Whether filtering by Runspace was enabled
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.Applies(Sqlcollaborative.Dbatools.Message.LogEntry)">
            <summary>
            Checks, whether a given entry matches the filter defined in this subscription
            </summary>
            <param name="Entry">The entry to validate</param>
            <returns>Whether the subscription should react to this entry</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Message.MessageHost">
            <summary>
            Provides static resources to the messaging subsystem
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.MaximumInformation">
            <summary>
            The maximum message level to still display to the user directly.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.MaximumVerbose">
            <summary>
            The maxium message level where verbose information is still written.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.MaximumDebug">
            <summary>
            The maximum message level where debug information is still written.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.MinimumInformation">
            <summary>
            The minimum required message level for messages that will be shown to the user.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.MinimumVerbose">
            <summary>
            The minimum required message level where verbose information is written.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.MinimumDebug">
            <summary>
            The minimum required message level where debug information is written.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.InfoColor">
            <summary>
            The color stuff gets written to the console in
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.InfoColorEmphasis">
            <summary>
            The color important stuff gets written to the console in
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.InfoColorSubtle">
            <summary>
            The color background stuff gets written to the console in
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.DeveloperColor">
            <summary>
            The color stuff gets written to the console in, when developer mode is enabled and the message would not have been written after all
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.DeveloperMode">
            <summary>
            Enables the developer mode. In this all messages are written to the console, in order to make it easier to troubleshoot issues.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.NestedLevelDecrement">
            <summary>
            Message levels can decrease by nested level. This causes messages to have an increasingly reduced level as the size of the callstack increases. 
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.DisableVerbosity">
            <summary>
            Globally override all verbosity
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.EnableMessageTimestamp">
            <summary>
            Include message timestamps in verbose message output
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.EnableMessageDisplayCommand">
            <summary>
            Include the message display command in the verbose message output
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.EnableMessageBreadcrumbs">
            <summary>
            Include the entire callstack in the verbose message output
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.TransformErrorQueueSize">
            <summary>
            The size of the transform error queue. When adding more than this, the oldest entry will be discarded
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.ExceptionTransforms">
            <summary>
            Provides the option to transform exceptions based on the original exception type
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.TargetTransforms">
            <summary>
            Provides the option to transform target objects based on type. This is sometimes important when working with live state objects that should not be serialized.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.TransformErrors">
            <summary>
            The list of transformation errors that occured.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.MessageHost.GetTransformErrors">
            <summary>
            Returns the current queue of failed transformations
            </summary>
            <returns>The list of transformations that failed</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.MessageHost.WriteTransformError(System.Management.Automation.ErrorRecord,System.String,System.String,System.Object,Sqlcollaborative.Dbatools.Message.TransformType,System.Guid)">
            <summary>
            Writes a new transform error
            </summary>
            <param name="Record">The record of what went wrong</param>
            <param name="FunctionName">The name of the function writing the transformed message</param>
            <param name="ModuleName">The module the function writing the transformed message is part of</param>
            <param name="Object">The object that should have been transformed</param>
            <param name="Type">The type of transform that was attempted</param>
            <param name="Runspace">The runspace it all happened on</param>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.ExceptionTransformList">
            <summary>
            List of custom transforms for exceptions
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.TargetTransformlist">
            <summary>
            List of custom transforms for targets
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.MessageLevelModifiers">
            <summary>
            List of all modifiers that apply to message levels
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.Events">
            <summary>
            List of events that subscribe to messages being written
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Message.MessageLevel">
            <summary>
            The various levels of verbosity available.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevel.Critical">
            <summary>
            Very important message, should be shown to the user as a high priority
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevel.Important">
            <summary>
            Important message, the user should read this
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevel.Output">
            <summary>
            Important message, the user should read this
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevel.Significant">
            <summary>
            Message relevant to the user.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevel.VeryVerbose">
            <summary>
            Not important to the regular user, still of some interest to the curious
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevel.Verbose">
            <summary>
            Background process information, in case the user wants some detailed information on what is currently happening.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevel.SomewhatVerbose">
            <summary>
            A footnote in current processing, rarely of interest to the user
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevel.System">
            <summary>
            A message of some interest from an internal system persepctive, but largely irrelevant to the user.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevel.Debug">
            <summary>
            Something only of interest to a debugger
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevel.InternalComment">
            <summary>
            This message barely made the cut from being culled. Of purely development internal interest, and even there is 'interest' a strong word for it.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevel.Warning">
            <summary>
            This message is a warning, sure sign something went badly wrong
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Message.MessageLevelModifier">
            <summary>
            A modification to a given message's level
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevelModifier.Name">
            <summary>
            Name of the modifier. Prevents duplication in a multi-runspace scenario.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevelModifier.Modifier">
            <summary>
            The amount to modify the level by
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevelModifier.IncludeFunctionName">
            <summary>
            Apply modifier only to messages from this function.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevelModifier.ExcludeFunctionName">
            <summary>
            Apply modifier not when the message is written by this function.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevelModifier.IncludeModuleName">
            <summary>
            Apply modifier only to messages from this module
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevelModifier.ExcludeModuleName">
            <summary>
            Do not apply modifier to messages from this module
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevelModifier.IncludeTags">
            <summary>
            Only apply this modifier to a message that includes at least one of these tags
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevelModifier.ExcludeTags">
            <summary>
            Do not apply this modifier to a message that includes any of the following tags
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.MessageLevelModifier.AppliesTo(System.String,System.String,System.Collections.Generic.List{System.String})">
            <summary>
            Tests, whether a message a message should be modified by this modiier
            </summary>
            <param name="FunctionName">The name of the function writing the message</param>
            <param name="ModuleName">The name of the module, the function writing this message comes from</param>
            <param name="Tags">The tags of the message written</param>
            <returns>Whether the message applies</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Message.TransformCondition">
            <summary>
            A condition, under which the object shall be transaformed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.TransformCondition.TypeName">
            <summary>
            Name of the type. All similar types (as determined by the '-like' operator) will be transformed.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.TransformCondition.ModuleName">
            <summary>
            The name of the module to consider, using the -Like operator
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.TransformCondition.FunctionName">
            <summary>
            The name of the function name to consider, using the -Like operator
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.TransformCondition.ScriptBlock">
            <summary>
            The scriptblock that performs the transformation
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.TransformCondition.Type">
            <summary>
            What kind of transformation is being performed?
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.TransformCondition.#ctor(System.String,System.String,System.String,System.Management.Automation.ScriptBlock,Sqlcollaborative.Dbatools.Message.TransformType)">
            <summary>
            Initializes a transform condition
            </summary>
            <param name="TypeName">Only objects of similar name will be transformed</param>
            <param name="ModuleName">Only objects coming from similar modules will be considered</param>
            <param name="FunctionName">Only objects coming from similar functions will be considered</param>
            <param name="ScriptBlock">The scriptblock used for the transformation</param>
            <param name="Type">What kind of transformation this is</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Message.TransformError">
            <summary>
            An error occured during a message transformation
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.TransformError.Record">
            <summary>
            The error record of what went wrong
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.TransformError.FunctionName">
            <summary>
            The name of the function writing the message that failed to transform
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.TransformError.ModuleName">
            <summary>
            The name of the module the command writing the message came from
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.TransformError.Timestamp">
            <summary>
            When did it all happen?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.TransformError.Object">
            <summary>
            The object that was supposed to be transformed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.TransformError.Type">
            <summary>
            The kind of transform that failed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.TransformError.Runspace">
            <summary>
            The runspace it all happened on
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.TransformError.#ctor(System.Management.Automation.ErrorRecord,System.String,System.String,System.Object,Sqlcollaborative.Dbatools.Message.TransformType,System.Guid)">
            <summary>
            Creates a new transform error
            </summary>
            <param name="Record">The record of what went wrong</param>
            <param name="FunctionName">The name of the function writing the transformed message</param>
            <param name="ModuleName">The module the function writing the transformed message is part of</param>
            <param name="Object">The object that should have been transformed</param>
            <param name="Type">The type of transform that was attempted</param>
            <param name="Runspace">The runspace it all happened on</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Message.TransformList">
            <summary>
            List engine, managing the lists for a message transformation type
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.TransformList.GetAll">
            <summary>
            Returns all entries in the list.
            </summary>
            <returns>The list of transforms contained within</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.TransformList.IsListed(Sqlcollaborative.Dbatools.Message.TransformCondition)">
            <summary>
            Returns whether the actual object is part of the list
            </summary>
            <param name="Condition">The object to test for list membership</param>
            <returns>Whether the object is listed</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.TransformList.IsContained(Sqlcollaborative.Dbatools.Message.TransformCondition)">
            <summary>
            Returns whether a condition with equal conditions already exists
            </summary>
            <param name="Condition">The condition to test</param>
            <returns>Whether the referenced condition is already listed</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.TransformList.Add(Sqlcollaborative.Dbatools.Message.TransformCondition)">
            <summary>
            Adds a condition to the list, if there is no equivalent condition present.
            </summary>
            <param name="Condition">The condition to add</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.TransformList.Remove(Sqlcollaborative.Dbatools.Message.TransformCondition)">
            <summary>
            Removes a condition from the lsit of conditional transforms
            </summary>
            <param name="Condition">The condition to remove</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.TransformList.Get(System.String,System.String,System.String)">
            <summary>
            Returns the first transform whose filter is similar enough to work out.
            </summary>
            <param name="TypeName">The name of the type to check for a transform</param>
            <param name="ModuleName">The module of the command that wrote the message with the transformable object</param>
            <param name="Functionname">The command that wrote the message with the transformable object</param>
            <returns>Either a transform or null, if no fitting transform was found</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Message.TransformType">
            <summary>
            The messaging system provides these kinds of transformations for input.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.TransformType.Target">
            <summary>
            A target transform can transform the target object specified. Used for live-state objects that should not be serialized on a second thread.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.TransformType.Exception">
            <summary>
            An exception transform allows automatic transformation of exceptions. Primarily used to unwrap exceptions from an API that wraps all exceptions.
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Parameter.DbaCmConnectionParameter">
            <summary>
            Input converter for Computer Management Information
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaCmConnectionParameter.Connection">
            <summary>
            The resolved connection object
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaCmConnectionParameter.Success">
            <summary>
            Whether input processing was successful
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaCmConnectionParameter.InputObject">
            <summary>
            The object actually passed to the class
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCmConnectionParameter.op_Implicit(Sqlcollaborative.Dbatools.Parameter.DbaCmConnectionParameter)~Sqlcollaborative.Dbatools.Connection.ManagementConnection">
            <summary>
            Implicitly convert all connection parameter objects to the connection-type
            </summary>
            <param name="Input">The parameter object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCmConnectionParameter.#ctor(System.String)">
            <summary>
            Creates a new DbaWmConnectionParameter based on an input-name
            </summary>
            <param name="ComputerName">The name of the computer the connection is stored for.</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCmConnectionParameter.#ctor(Sqlcollaborative.Dbatools.Connection.ManagementConnection)">
            <summary>
            Creates a new DbaWmConnectionParameter based on an already existing connection object.
            </summary>
            <param name="Connection">The connection to accept</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCmConnectionParameter.#ctor(System.Object)">
            <summary>
            Tries to convert a generic input object into a true input.
            </summary>
            <param name="Input">Any damn object in the world</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCmConnectionParameter.#ctor(Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter)">
            <summary>
            Creates a new DbaCmConnectionParameter based on an instance parameter
            </summary>
            <param name="Instance">The instance to interpret</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter">
            <summary>
            Parameter class that handles the various kinds of credential input
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.Credential">
            <summary>
            The credential object received
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.UserName">
            <summary>
            The name of the credential object
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.Password">
            <summary>
            The password of the credential object
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.#ctor(System.Management.Automation.PSCredential)">
            <summary>
            Creates a credential parameter from a PSCredential object
            </summary>
            <param name="Credential">A PSCredential object</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.#ctor(System.Net.NetworkCredential)">
            <summary>
            Creates a credential parameter from a NetworkCredential object
            </summary>
            <param name="Credential">The credentials to use</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.#ctor(System.Object)">
            <summary>
            Creates a credential parameter from anything it nows how to handle
            </summary>
            <param name="Credential">The object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.op_Implicit(Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter)~System.Management.Automation.PSCredential">
            <summary>
            Implicitly converts from DbaCredentialParameter to PSCredential
            </summary>
            <param name="Input">The DbaCredentialParameter to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.op_Implicit(System.Management.Automation.PSCredential)~Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter">
            <summary>
            Implicitly converts a PSCredential object to DbaCredenitalParameter
            </summary>
            <param name="Input">The PSCredential to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.op_Implicit(Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter)~System.Net.NetworkCredential">
            <summary>
            Implicitly converts from DbaCredentialParameter to NetworkCredential
            </summary>
            <param name="Input">The DbaCredentialParameter to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.op_Implicit(System.Net.NetworkCredential)~Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter">
            <summary>
            Implicitly converts a NetworkCredential object to DbaCredenitalParameter
            </summary>
            <param name="Input">The NetworkCredential to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.GetNetworkCredential">
            <summary>
            Legacy wrapper. While there exists implicit conversion, this allows using the object as before, avoiding errors for unknown method.
            </summary>
            <returns>A network credential object with the same credentials as the original object</returns>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.CredentialStore">
            <summary>
            Cached credentials, if the user stors them under a name.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.GetTypeCode">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToBoolean(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToChar(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToSByte(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToByte(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToInt16(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToUInt16(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToInt32(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToUInt32(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToInt64(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToUInt64(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToSingle(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToDouble(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToDecimal(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToDateTime(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToString(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToType(System.Type,System.IFormatProvider)">
            <summary>
            Tries to convert the credential parameter to one of its supported types
            </summary>
            <param name="TargetType">The type to convert to</param>
            <param name="Format">Irrelevant</param>
            <returns></returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Parameter.DbaDatabaseParameter">
            <summary>
            Parameter class that accepts anything pointing at a database
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaDatabaseParameter.InputObject">
            <summary>
            The original object passed to the parameter
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaDatabaseParameter.Database">
            <summary>
            The SMO Database Object
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaDatabaseParameter.Name">
            <summary>
            The name of the database
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaDatabaseParameter.#ctor(System.String)">
            <summary>
            Accepts the name of a database and converts it to a DbaDatabaseParameter
            </summary>
            <param name="Name"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaDatabaseParameter.#ctor(System.Object)">
            <summary>
            Accepts anything and tries to convert it to a live SMO Database object
            </summary>
            <param name="Item">The item to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaDatabaseParameter.ToString">
            <summary>
            Overrides the regular tostring to show something pleasant and useful
            </summary>
            <returns>The name of the database</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Parameter.DbaDatabaseSmoParameter">
            <summary>
            Parameter class that only accepts live SMO Databases
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaDatabaseSmoParameter.InputObject">
            <summary>
            The original object passed to the parameter
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaDatabaseSmoParameter.Database">
            <summary>
            The SMO Database Object
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaDatabaseSmoParameter.Name">
            <summary>
            The name of the database
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaDatabaseSmoParameter.#ctor(System.Object)">
            <summary>
            Accepts anything and tries to convert it to a live SMO Database object
            </summary>
            <param name="Item">The item to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaDatabaseSmoParameter.ToString">
            <summary>
            Overrides the regular tostring to show something pleasant and useful
            </summary>
            <returns>The name of the database</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Parameter.DbaInstanceInputType">
            <summary>
            What kind of object was bound to the parameter class?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaInstanceInputType.Default">
            <summary>
            Anything, really. An unspecific not reusable type was bound
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaInstanceInputType.Linked">
            <summary>
            A live smo linked server object was bound
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaInstanceInputType.Server">
            <summary>
            A live smo server object was bound
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaInstanceInputType.RegisteredServer">
            <summary>
            A Central Management Server RegisteredServer SMO object was bound
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaInstanceInputType.ConnectionString">
            <summary>
            An actual connection string was specified. Connection strings are directly reused for SMO connections
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaInstanceInputType.ConnectionStringLocalDB">
            <summary>
            A connection string pointing at a local, file-based DB
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaInstanceInputType.SqlConnection">
            <summary>
            An already established sql connection to was created outside of SMO
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter">
            <summary>
            Input converter for instance information
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.ComputerName">
            <summary>
            Name of the computer as resolvable by DNS
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.InstanceName">
            <summary>
            Name of the instance on the target server
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.Port">
            <summary>
            The port over which to connect to the server. Only present if non-default
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.NetworkProtocol">
            <summary>
            The network protocol to connect over
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.IsLocalHost">
            <summary>
            Verifies, whether the specified computer is localhost or not.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.FullName">
            <summary>
            Full name of the instance, including the server-name
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.FullSmoName">
            <summary>
            Full name of the instance, including the server-name, used when connecting via SMO
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.SqlComputerName">
            <summary>
            Name of the computer as used in an SQL Statement
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.SqlInstanceName">
            <summary>
            Name of the instance as used in an SQL Statement
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.SqlFullName">
            <summary>
            Full name of the instance, including the server-name as used in an SQL statement
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.IsConnectionString">
            <summary>
            Whether the input is a connection string
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.InputObject">
            <summary>
            The original object passed to the parameter class.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.Type">
            <summary>
            What kind of object was bound to the parameter class? For efficiency's purposes.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.LinkedLive">
            <summary>
            Returns, whether a live SMO object was bound for the purpose of accessing LinkedServer functionality
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.LinkedServer">
            <summary>
            Returns the available Linked Server objects from live objects only
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.op_Implicit(Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter)~System.String">
            <summary>
            Converts the parameter class to its full name
            </summary>
            <param name="Input">The parameter class object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.#ctor(System.String)">
            <summary>
            Creates a DBA Instance Parameter from string
            </summary>
            <param name="Name">The name of the instance</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.#ctor(System.Net.IPAddress)">
            <summary>
            Creates a DBA Instance Parameter from an IPAddress
            </summary>
            <param name="Address"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.#ctor(System.Net.NetworkInformation.PingReply)">
            <summary>
            Creates a DBA Instance Parameter from the reply to a ping
            </summary>
            <param name="Ping">The result of a ping</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.#ctor(System.Net.IPHostEntry)">
            <summary>
            Creates a DBA Instance Parameter from the result of a dns resolution
            </summary>
            <param name="Entry">The result of a dns resolution, to be used for targetting the default instance</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.#ctor(System.Data.SqlClient.SqlConnection)">
            <summary>
            Creates a DBA Instance Parameter from an established SQL Connection
            </summary>
            <param name="Connection">The connection to reuse</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.#ctor(Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport)">
            <summary>
            Accept and understand discovery reports.
            </summary>
            <param name="Report">The report to interpret</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.#ctor(System.Object)">
            <summary>
            Creates a DBA Instance parameter from any object
            </summary>
            <param name="Input">Object to parse</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.ToString">
            <summary>
            Overrides the regular <c>ToString()</c> to show something pleasant and useful
            </summary>
            <returns>The <see cref="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.FullSmoName"/></returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Parameter.DbaSelectParameter">
            <summary>
            Class that automatically parses input chosen for the -Property parameter of Select-PSUObject
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaSelectParameter.InputObject">
            <summary>
            The original input object
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaSelectParameter.Value">
            <summary>
            The value as Select-Object wants it
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaSelectParameter.#ctor(System.String)">
            <summary>
            Builds a property parameter from string
            </summary>
            <param name="Value">The string to interpret</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaSelectParameter.#ctor(System.Collections.Hashtable)">
            <summary>
            Builds a select parameter from a hashtable (pretty straightforward)
            </summary>
            <param name="Hash">The hashtable to accept</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Parameter.ParameterContractAttribute">
            <summary>
            The attribute used to define the elements of a ParameterClass contract
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.ParameterContractAttribute.Type">
            <summary>
            Returns the type of the element this attribute is supposed to be attached to.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.ParameterContractAttribute.Behavior">
            <summary>
            Returns the behavior to expect from the contracted element. This sets the expectations on how this element is likely to act.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.ParameterContractAttribute.#ctor(Sqlcollaborative.Dbatools.Parameter.ParameterContractType,Sqlcollaborative.Dbatools.Parameter.ParameterContractBehavior)">
            <summary>
            Ceates a perfectly common parameter contract attribute. For use with all parameter classes' public elements.
            </summary>
            <param name="Type"></param>
            <param name="Behavior"></param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Parameter.ParameterContractBehavior">
            <summary>
            Defines how this element will behave
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.ParameterContractBehavior.NotContracted">
            <summary>
            This elements is not actually part of the contract. Generally you wouldn't want to add the attribute at all in that case. However, in some places it helps avoiding confusion.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.ParameterContractBehavior.Mandatory">
            <summary>
            This element may never be null and must be considered in all assignments. Even if the element is de facto not nullable, all constructors must assign it.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.ParameterContractBehavior.Optional">
            <summary>
            This element may contain data, but is not required to. In case of a method, it may simply do nothing
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.ParameterContractBehavior.Failable">
            <summary>
            This method may throw an error when executing and should always be handled with try/catch. Use this on methods that use external calls.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.ParameterContractBehavior.Arbiter">
            <summary>
            The content of the thus marked field determines the dependent's state. Generally, only if the arbiter is true, will the dependent elements be mandatory. This behavior may only be assigned to boolean fields.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.ParameterContractBehavior.Conditional">
            <summary>
            This behavior can be assigned together with the 'Mandatory' behavior. It means the field is only mandatory if an arbiter field is present and set to true.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.ParameterContractBehavior.Conversion">
            <summary>
            Converts content. Generally applied only to operators, but some methods may also convert information.
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Parameter.ParameterContractType">
            <summary>
            Defines what kind of element is granted the contract
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.ParameterContractType.Field">
            <summary>
            The contracted element is a field containing a value
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.ParameterContractType.Method">
            <summary>
            The contracted element is a method, performing an action
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.ParameterContractType.Operator">
            <summary>
            The contracted element is an operator, facilitating type conversion. Generally into a dedicated object type this parameterclass abstracts.
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Runspace.DbaRunspaceState">
            <summary>
            Contains the state a managed, unique runspace can be in.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Runspace.DbaRunspaceState.Running">
            <summary>
            The runspace is up and running
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Runspace.DbaRunspaceState.Stopping">
            <summary>
            The runspace has received the stop order, but has not yet obeyed it
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Runspace.DbaRunspaceState.Stopped">
            <summary>
            The runspace has followed its order to stop and is currently disabled
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Runspace.RunspaceContainer">
            <summary>
            Class that contains the logic necessary to manage a unique runspace
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Runspace.RunspaceContainer.Name">
            <summary>
            The name of the runspace.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Runspace.RunspaceContainer.RunspaceGuid">
            <summary>
            The Guid of the running Runspace
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Runspace.RunspaceContainer.SetScript(System.Management.Automation.ScriptBlock)">
            <summary>
            Sets the script to execute in the runspace. Will NOT take immediate effect. Only after restarting the runspace will it be used.
            </summary>
            <param name="Script">The scriptblock to execute</param>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Runspace.RunspaceContainer.State">
            <summary>
            The state the runspace currently is in.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Runspace.RunspaceContainer.Start">
            <summary>
            Starts the Runspace.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Runspace.RunspaceContainer.SetName(System.Management.Automation.Runspaces.Runspace)">
            <summary>
            Sets the name on a runspace. This WILL FAIL for PowerShell v3!
            </summary>
            <param name="Runspace">The runspace to be named</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Runspace.RunspaceContainer.Stop">
            <summary>
            Gracefully stops the Runspace
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Runspace.RunspaceContainer.Kill">
            <summary>
            Very ungracefully kills the runspace. Use only in the most dire emergency.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Runspace.RunspaceContainer.SignalStopped">
            <summary>
            Signals the registered runspace has stopped execution
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Runspace.RunspaceContainer.#ctor(System.String,System.Management.Automation.ScriptBlock)">
            <summary>
            Creates a new runspace container with the basic information needed
            </summary>
            <param name="Name">The name of the Runspace</param>
            <param name="Script">The code using the runspace logic</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Runspace.RunspaceHost">
            <summary>
            Provides hosting for all registered runspaces
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Runspace.RunspaceHost.StopTimeoutSeconds">
            <summary>
            The number of seconds before a Stop command is interrupted and instead the runspace is gracelessly shut down.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Runspace.RunspaceHost.Runspaces">
            <summary>
            The dictionary containing the definitive list of unique Runspace
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.TabExpansion.InstanceAccess">
            <summary>
            Contains information on access to an instance
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.InstanceAccess.InstanceName">
            <summary>
            The name of the instance to access
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.InstanceAccess.IsSysAdmin">
            <summary>
            Whether the account had sysadmin privileges. On multiple user usage, the cache will prefer sysadmin accounts.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.InstanceAccess.ConnectionObject">
            <summary>
            The actual connection object to connect with to the server
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.InstanceAccess.LastAccess">
            <summary>
            When was the instance last accessed using dbatools
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.InstanceAccess.LastUpdate">
            <summary>
            When was the instance's TEPP cache last updated
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.TabExpansion.ScriptContainer">
            <summary>
            Regular container to store scripts in, that are used in TEPP
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.ScriptContainer.Name">
            <summary>
            The name of the scriptblock
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.ScriptContainer.ScriptBlock">
            <summary>
            The scriptblock doing the logic
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.ScriptContainer.LastExecution">
            <summary>
            The last time the scriptblock was called. Must be updated by the scriptblock itself
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.ScriptContainer.LastDuration">
            <summary>
            The time it took to run the last time
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.TabExpansion.TabCompletionSet">
            <summary>
            Contains information used to transmit Tepp Assignment
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabCompletionSet.Command">
            <summary>
            The name of the command to complete. "*" if all commands that have the parameter should be selected instead
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabCompletionSet.Parameter">
            <summary>
            The parameter to complete
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabCompletionSet.Script">
            <summary>
            The name of the script to complete with
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.TabExpansion.TabCompletionSet.#ctor(System.String,System.String,System.String)">
            <summary>
            Creates a new tab completion set object with all information prefilled
            </summary>
            <param name="Command">The name of the command to complete. "*" if all commands that have the parameter should be selected instead</param>
            <param name="Parameter">The parameter to complete</param>
            <param name="Script">The name of the script to complete with</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.TabExpansion.TabCompletionSet.Applies(System.String,System.String)">
            <summary>
            Tests, whether the completion set applies to the specified parameter / command combination
            </summary>
            <param name="Command">The command to test</param>
            <param name="Parameter">The parameter of the command to test</param>
            <returns>Whether this completion set applies to the specified combination of parameter / command</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost">
            <summary>
            Class that handles the static fields supporting the dbatools TabExpansion implementation
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.Scripts">
            <summary>
            Field containing the scripts that were registered.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.Cache">
            <summary>
            The cache used by scripts utilizing TabExpansionPlusPlus in dbatools
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.InstanceAccess">
            <summary>
            List of instances and when they were last accessed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.TeppGatherScriptsFast">
            <summary>
            Scripts that build the cache and are suitable for synchronous execution
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.TeppGatherScriptsSlow">
            <summary>
            Scripts that build the cache and are not suitable for synchronous execution
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.DbatoolsCommands">
            <summary>
            A list of all commands imported into dbatools
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.TabCompletionSets">
            <summary>
            List of completion sets that should be processed into Tepp Assignments. Only populate this list on first import.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.TeppAssignment">
            <summary>
            Maps a TEPP scriptblock to a command and parameter
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.SetInstance(System.String,System.Object,System.Boolean)">
            <summary>
            Registers a new instance or updates an already existing one. Should only be called from Connect-SqlInstance and Connect-DbaSqlServer
            </summary>
            <param name="InstanceName">Name of the instance connected to</param>
            <param name="Connection">To connection object containing the relevant information for accessing the instance</param>
            <param name="IsSysAdmin">Whether the account connecting to the instnace has SA privileges</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.GetTeppScript(System.String,System.String)">
            <summary>
            Returns the assigned scriptblock for a given parameter
            </summary>
            <param name="Command">The command that should be completed</param>
            <param name="Parameter">The parameter completion is provided for</param>
            <returns>Either the relevant script container or null</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.SetTeppScript(System.String,System.String,System.String)">
            <summary>
            Assigns a registered script to the parameter of a command
            </summary>
            <param name="Command">The command for which to complete</param>
            <param name="Parameter">The parameter for which to complete</param>
            <param name="Script">To name of the script with which to complete</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.AddTabCompletionSet(System.String,System.String,System.String)">
            <summary>
            Adds a completion set to the list of items to process
            </summary>
            <param name="Command">The command to complete for (accepts wildcard matching)</param>
            <param name="Parameter">The parameter to complete for (accepts wildcard matching)</param>
            <param name="Script">The script to register</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.CalculateTabExpansion">
            <summary>
            Processes the content of TabCompletionSets and Scripts into TappAssignments based on the DbatoolsCommands list.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.TeppDisabled">
            <summary>
            Whether TEPP in its entirety is disabled
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.TeppAsyncDisabled">
            <summary>
            Whether asynchronous TEPP updating should be disabled
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.TeppSyncDisabled">
            <summary>
            Whether synchronous TEPP updating should be disabled
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.TeppUpdateInterval">
            <summary>
            The interval in which asynchronous TEPP cache updates are performed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.TeppUpdateTimeout">
            <summary>
            After this timespan of no requests to a server, the updates to its cache are disabled.
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.TypeConversion.DbaCredentialParameterConverter">
            <summary>
            Converts to and from DbaCredentialparameter
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.TypeConversion.DbaCredentialParameterConverter.CanConvertTo(System.Object,System.Type)">
            <summary>
            Verifies, whether a conversion for the object to the target type is possible
            </summary>
            <param name="SourceValue">The object to convert</param>
            <param name="DestinationType">The type to convert to</param>
            <returns>Whether it's possible, duh!</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.TypeConversion.DbaCredentialParameterConverter.ConvertTo(System.Object,System.Type,System.IFormatProvider,System.Boolean)">
            <summary>
            Converts from DbaCredentialparameter to whatever destination type is attempted
            </summary>
            <param name="sourceValue">The source object. Better be a DbaCredentialparameter!</param>
            <param name="destinationType">Should be a supported destination type</param>
            <param name="formatProvider">Irrelevant</param>
            <param name="ignoreCase">Irrelevant</param>
            <returns>The target content type</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.TypeConversion.DbaCredentialParameterConverter.CanConvertFrom(System.Object,System.Type)">
            <summary>
            Verifies, whether a conversion for the object from the source type to DbaCredentialParameter is possible
            </summary>
            <param name="SourceValue">The object to convert</param>
            <param name="DestinationType">The source type to convert to</param>
            <returns>Whether it's possible, duh!</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.TypeConversion.DbaCredentialParameterConverter.ConvertFrom(System.Object,System.Type,System.IFormatProvider,System.Boolean)">
            <summary>
            Converts a source object to DbaCredentialparameter
            </summary>
            <param name="sourceValue">The source object</param>
            <param name="destinationType">The destination type. Must be DbaCredentialParameter, or red stuff happens</param>
            <param name="formatProvider">Irrelevant</param>
            <param name="ignoreCase">Irrelevant</param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.TypeConversion.DbaCredentialParameterConverter.IsSupportedType(System.Type)">
            <summary>
            Returns, whether a given type is supported for conversion
            </summary>
            <param name="type">The type to validate</param>
            <returns>Whether it's a supported conversion</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Utility.DateTimeExtension">
            <summary>
            Extends DateTime
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DateTimeExtension.CompareTo(System.DateTime,Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase)">
            <summary>
            Adds a compareTo method to DateTime to compare with DbaDateTimeBase
            </summary>
            <param name="Base">The extended DateTime object</param>
            <param name="comparedTo">The DbaDateTimeBase to compare with</param>
            <returns></returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Utility.DbaDate">
            <summary>
            A dbatools-internal datetime wrapper for neater display
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.#ctor(System.DateTime)">
            <summary>
            Constructs a generic timestamp object wrapper from an input timestamp object.
            </summary>
            <param name="Timestamp">The timestamp to wrap</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.#ctor(System.String)">
            <summary>
            Parses a string into a datetime object.
            </summary>
            <param name="Time">The time-string to parse</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.#ctor(System.Int64)">
            <summary>
            
            </summary>
            <param name="ticks"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.#ctor(System.Int64,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="ticks"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.#ctor(System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.#ctor(System.Int32,System.Int32,System.Int32,System.Globalization.Calendar)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="calendar"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Globalization.Calendar)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="calendar"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Globalization.Calendar)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
            <param name="calendar"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Globalization.Calendar,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
            <param name="calendar"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.ToString">
            <summary>
            Provids the default-formated string, using the defined default formatting.
            </summary>
            <returns>Formatted datetime-string</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.op_Implicit(Sqlcollaborative.Dbatools.Utility.DbaDate)~System.DateTime">
            <summary>
            Implicitly convert to DateTime
            </summary>
            <param name="Base">The source object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.op_Implicit(System.DateTime)~Sqlcollaborative.Dbatools.Utility.DbaDate">
            <summary>
            Implicitly convert from DateTime
            </summary>
            <param name="Base">The object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.op_Implicit(Sqlcollaborative.Dbatools.Utility.DbaDate)~Sqlcollaborative.Dbatools.Utility.DbaDateTime">
            <summary>
            Implicitly convert to DbaDate
            </summary>
            <param name="Base">The source object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.op_Implicit(Sqlcollaborative.Dbatools.Utility.DbaDate)~Sqlcollaborative.Dbatools.Utility.DbaTime">
            <summary>
            Implicitly convert to DbaTime
            </summary>
            <param name="Base">The source object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.Generate(System.DateTime)">
            <summary>
            Generates a DbaDate object based off DateTime object. Will be null if Base is the start value (Tickes == 0).
            </summary>
            <param name="Base">The Datetime to base it off</param>
            <returns>The object to generate (or null)</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Utility.DbaDateTime">
            <summary>
            A dbatools-internal datetime wrapper for neater display
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.#ctor(System.DateTime)">
            <summary>
            Constructs a generic timestamp object wrapper from an input timestamp object.
            </summary>
            <param name="Timestamp">The timestamp to wrap</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.#ctor(System.String)">
            <summary>
            Parses a string into a datetime object.
            </summary>
            <param name="Time">The time-string to parse</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.#ctor(System.Int64)">
            <summary>
            
            </summary>
            <param name="ticks"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.#ctor(System.Int64,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="ticks"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.#ctor(System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.#ctor(System.Int32,System.Int32,System.Int32,System.Globalization.Calendar)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="calendar"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Globalization.Calendar)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="calendar"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Globalization.Calendar)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
            <param name="calendar"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Globalization.Calendar,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
            <param name="calendar"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.ToString">
            <summary>
            Provids the default-formated string, using the defined default formatting.
            </summary>
            <returns>Formatted datetime-string</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.op_Implicit(Sqlcollaborative.Dbatools.Utility.DbaDateTime)~System.DateTime">
            <summary>
            Implicitly convert to DateTime
            </summary>
            <param name="Base">The source object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.op_Implicit(System.DateTime)~Sqlcollaborative.Dbatools.Utility.DbaDateTime">
            <summary>
            Implicitly convert from DateTime
            </summary>
            <param name="Base">The object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.op_Implicit(Sqlcollaborative.Dbatools.Utility.DbaDateTime)~Sqlcollaborative.Dbatools.Utility.DbaDate">
            <summary>
            Implicitly convert to DbaDate
            </summary>
            <param name="Base">The source object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.op_Implicit(Sqlcollaborative.Dbatools.Utility.DbaDateTime)~Sqlcollaborative.Dbatools.Utility.DbaTime">
            <summary>
            Implicitly convert to DbaTime
            </summary>
            <param name="Base">The source object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.Generate(System.DateTime)">
            <summary>
            Generates a DbaDateTime object based off DateTime object. Will be null if Base is the start value (Tickes == 0).
            </summary>
            <param name="Base">The Datetime to base it off</param>
            <returns>The object to generate (or null)</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase">
            <summary>
            Base class for wrapping around a DateTime object
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase._timestamp">
            <summary>
            The core resource, containing the actual timestamp
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Date">
            <summary>
            Gets the date component of this instance.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Day">
            <summary>
            Gets the day of the month represented by this instance.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.DayOfWeek">
            <summary>
            Gets the day of the week represented by this instance.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.DayOfYear">
            <summary>
            Gets the day of the year represented by this instance.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Hour">
            <summary>
            Gets the hour component of the date represented by this instance.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Kind">
            <summary>
            Gets a value that indicates whether the time represented by this instance is based on local time, Coordinated Universal Time (UTC), or neither.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Millisecond">
            <summary>
            Gets the milliseconds component of the date represented by this instance.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Minute">
            <summary>
            Gets the minute component of the date represented by this instance.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Month">
            <summary>
            Gets the month component of the date represented by this instance.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Second">
            <summary>
            Gets the seconds component of the date represented by this instance.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Ticks">
            <summary>
            Gets the number of ticks that represent the date and time of this instance.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.TimeOfDay">
            <summary>
            Gets the time of day for this instance.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Year">
            <summary>
            Gets the year component of the date represented by this instance.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.#ctor">
            <summary>
            Constructor that should never be called, since this class should never be instantiated. It's there for implicit calls on child classes.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.#ctor(System.DateTime)">
            <summary>
            Constructs a generic timestamp object wrapper from an input timestamp object.
            </summary>
            <param name="Timestamp">The timestamp to wrap</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.#ctor(System.String)">
            <summary>
            Parses a string into a datetime object.
            </summary>
            <param name="Time">The time-string to parse</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.#ctor(System.Int64)">
            <summary>
            
            </summary>
            <param name="ticks"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.#ctor(System.Int64,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="ticks"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.#ctor(System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.#ctor(System.Int32,System.Int32,System.Int32,System.Globalization.Calendar)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="calendar"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Globalization.Calendar)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="calendar"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Globalization.Calendar)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
            <param name="calendar"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Globalization.Calendar,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
            <param name="calendar"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Add(System.TimeSpan)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.AddDays(System.Double)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.AddHours(System.Double)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.AddMilliseconds(System.Double)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.AddMinutes(System.Double)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.AddMonths(System.Int32)">
            <summary>
            
            </summary>
            <param name="months"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.AddSeconds(System.Double)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.AddTicks(System.Int64)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.AddYears(System.Int32)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.CompareTo(System.Object)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.CompareTo(System.DateTime)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Equals(System.Object)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Equals(System.DateTime)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.GetDateTimeFormats">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.GetDateTimeFormats(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="provider"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.GetDateTimeFormats(System.Char)">
            <summary>
            
            </summary>
            <param name="format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.GetDateTimeFormats(System.Char,System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="format"></param>
            <param name="provider"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.GetBaseObject">
            <summary>
            Retrieve base DateTime object, this is a wrapper for
            </summary>
            <returns>Base DateTime object</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.GetHashCode">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.GetTypeCode">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.IsDaylightSavingTime">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Subtract(System.DateTime)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Subtract(System.TimeSpan)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.ToBinary">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.ToFileTime">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.ToFileTimeUtc">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.ToLocalTime">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.ToLongDateString">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.ToLongTimeString">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.ToOADate">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.ToShortDateString">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.ToShortTimeString">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.ToString(System.String)">
            <summary>
            
            </summary>
            <param name="format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.ToString(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="provider"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.ToString(System.String,System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="format"></param>
            <param name="provider"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.ToUniversalTime">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.ParseDateTime(System.String)">
            <summary>
            Parses input string into datetime
            </summary>
            <param name="Value">The string to parse</param>
            <returns>The resultant datetime.</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.op_Addition(Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase,System.TimeSpan)">
            <summary>
            
            </summary>
            <param name="Timestamp"></param>
            <param name="Duration"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.op_Subtraction(Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase,System.TimeSpan)">
            <summary>
            
            </summary>
            <param name="Timestamp"></param>
            <param name="Duration"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.op_Equality(Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase,Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase)">
            <summary>
            
            </summary>
            <param name="Timestamp1"></param>
            <param name="Timestamp2"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.op_Inequality(Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase,Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase)">
            <summary>
            
            </summary>
            <param name="Timestamp1"></param>
            <param name="Timestamp2"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.op_GreaterThan(Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase,Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase)">
            <summary>
            
            </summary>
            <param name="Timestamp1"></param>
            <param name="Timestamp2"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.op_LessThan(Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase,Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase)">
            <summary>
            
            </summary>
            <param name="Timestamp1"></param>
            <param name="Timestamp2"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.op_GreaterThanOrEqual(Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase,Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase)">
            <summary>
            
            </summary>
            <param name="Timestamp1"></param>
            <param name="Timestamp2"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.op_LessThanOrEqual(Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase,Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase)">
            <summary>
            
            </summary>
            <param name="Timestamp1"></param>
            <param name="Timestamp2"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.op_Implicit(Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase)~System.DateTime">
            <summary>
            Implicitly convert DbaDateTimeBase to DateTime
            </summary>
            <param name="Base">The source object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.op_Implicit(System.DateTime)~Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase">
            <summary>
            Implicitly convert DateTime to DbaDateTimeBase
            </summary>
            <param name="Base">The object to convert</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Utility.DbaTime">
            <summary>
            A dbatools-internal datetime wrapper for neater display
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.#ctor(System.DateTime)">
            <summary>
            Constructs a generic timestamp object wrapper from an input timestamp object.
            </summary>
            <param name="Timestamp">The timestamp to wrap</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.#ctor(System.String)">
            <summary>
            Parses a string into a datetime object.
            </summary>
            <param name="Time">The time-string to parse</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.#ctor(System.Int64)">
            <summary>
            
            </summary>
            <param name="ticks"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.#ctor(System.Int64,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="ticks"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.#ctor(System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.#ctor(System.Int32,System.Int32,System.Int32,System.Globalization.Calendar)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="calendar"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Globalization.Calendar)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="calendar"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Globalization.Calendar)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
            <param name="calendar"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Globalization.Calendar,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
            <param name="calendar"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.ToString">
            <summary>
            Provids the default-formated string, using the defined default formatting.
            </summary>
            <returns>Formatted datetime-string</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.op_Implicit(Sqlcollaborative.Dbatools.Utility.DbaTime)~System.DateTime">
            <summary>
            Implicitly convert to DateTime
            </summary>
            <param name="Base">The source object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.op_Implicit(System.DateTime)~Sqlcollaborative.Dbatools.Utility.DbaTime">
            <summary>
            Implicitly convert from DateTime
            </summary>
            <param name="Base">The object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.op_Implicit(Sqlcollaborative.Dbatools.Utility.DbaTime)~Sqlcollaborative.Dbatools.Utility.DbaDate">
            <summary>
            Implicitly convert to DbaDate
            </summary>
            <param name="Base">The source object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.op_Implicit(Sqlcollaborative.Dbatools.Utility.DbaTime)~Sqlcollaborative.Dbatools.Utility.DbaDateTime">
            <summary>
            Implicitly convert to DbaTime
            </summary>
            <param name="Base">The source object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.op_Implicit(Sqlcollaborative.Dbatools.Utility.DbaTime)~System.String">
            <summary>
            Implicitly convert to string
            </summary>
            <param name="Base">Object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.Generate(System.DateTime)">
            <summary>
            Generates a DbaDateTime object based off DateTime object. Will be null if Base is the start value (Tickes == 0).
            </summary>
            <param name="Base">The Datetime to base it off</param>
            <returns>The object to generate (or null)</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan">
            <summary>
            A wrapper class, encapsuling a regular TimeSpan object. Used to provide custom timespan display.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.Days">
            <summary>
            Gets the days component of the time interval represented by the current TimeSpan structure.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.Hours">
            <summary>
            Gets the hours component of the time interval represented by the current TimeSpan structure.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.Milliseconds">
            <summary>
            Gets the milliseconds component of the time interval represented by the current TimeSpan structure.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.Minutes">
            <summary>
            Gets the minutes component of the time interval represented by the current TimeSpan structure.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.Seconds">
            <summary>
            Gets the seconds component of the time interval represented by the current TimeSpan structure.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.Ticks">
            <summary>
            Gets the number of ticks that represent the value of the current TimeSpan structure.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.TotalDays">
            <summary>
            Gets the value of the current TimeSpan structure expressed in whole and fractional days.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.TotalHours">
            <summary>
            Gets the value of the current TimeSpan structure expressed in whole and fractional hours.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.TotalMilliseconds">
            <summary>
            Gets the value of the current TimeSpan structure expressed in whole and fractional milliseconds.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.TotalMinutes">
            <summary>
            Gets the value of the current TimeSpan structure expressed in whole and fractional minutes.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.TotalSeconds">
            <summary>
            Gets the value of the current TimeSpan structure expressed in whole and fractional seconds.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.#ctor(System.TimeSpan)">
            <summary>
            
            </summary>
            <param name="Timespan"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.#ctor(System.String)">
            <summary>
            Converts a string into a timespan
            </summary>
            <param name="Timespan">The string to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.#ctor(System.Int64)">
            <summary>
            
            </summary>
            <param name="ticks"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.#ctor(System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="hours"></param>
            <param name="minutes"></param>
            <param name="seconds"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.#ctor(System.Int32,System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="days"></param>
            <param name="hours"></param>
            <param name="minutes"></param>
            <param name="seconds"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="days"></param>
            <param name="hours"></param>
            <param name="minutes"></param>
            <param name="seconds"></param>
            <param name="milliseconds"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.ParseTimeSpan(System.String)">
            <summary>
            Parses an input string as timespan
            </summary>
            <param name="Value">The string to interpret</param>
            <returns>The interpreted timespan value</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.Add(System.TimeSpan)">
            <summary>
            
            </summary>
            <param name="ts"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.CompareTo(System.Object)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.CompareTo(System.TimeSpan)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.CompareTo(Sqlcollaborative.Dbatools.Utility.DbaTimeSpan)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.Duration">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.Equals(System.Object)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.Equals(System.TimeSpan)">
            <summary>
            
            </summary>
            <param name="obj"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.GetBaseObject">
            <summary>
            Returns the wrapped base object
            </summary>
            <returns>The base object</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.GetHashCode">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.Negate">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.Subtract(System.TimeSpan)">
            <summary>
            
            </summary>
            <param name="ts"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.ToString">
            <summary>
            Returns the default string representation of the TimeSpan object
            </summary>
            <returns>The string representation of the DbaTimeSpan object</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.ToString(System.String)">
            <summary>
            
            </summary>
            <param name="format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.ToString(System.String,System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="format"></param>
            <param name="formatProvider"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.op_Implicit(Sqlcollaborative.Dbatools.Utility.DbaTimeSpan)~System.TimeSpan">
            <summary>
            Implicitly converts a DbaTimeSpan object into a TimeSpan object
            </summary>
            <param name="Base">The original object to revert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.op_Implicit(System.TimeSpan)~Sqlcollaborative.Dbatools.Utility.DbaTimeSpan">
            <summary>
            Implicitly converts a TimeSpan object into a DbaTimeSpan object
            </summary>
            <param name="Base">The original object to wrap</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Utility.DbaTimeSpanPretty">
            <summary>
            Makes timespan great again
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpanPretty.FromMilliseconds(System.Double)">
            <summary>
            Creates a new, pretty timespan object from milliseconds
            </summary>
            <param name="Milliseconds">The milliseconds to convert from.</param>
            <returns>A pretty timespan object</returns>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.DbaTimeSpanPretty.Digits">
            <summary>
            The number of digits a pretty timespan should round to.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpanPretty.#ctor(System.TimeSpan)">
            <summary>
            
            </summary>
            <param name="Timespan"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpanPretty.#ctor(System.String)">
            <summary>
            Converts a string into a timespan
            </summary>
            <param name="Timespan">The string to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpanPretty.#ctor(System.Int64)">
            <summary>
            
            </summary>
            <param name="ticks"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpanPretty.#ctor(System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="hours"></param>
            <param name="minutes"></param>
            <param name="seconds"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpanPretty.#ctor(System.Int32,System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="days"></param>
            <param name="hours"></param>
            <param name="minutes"></param>
            <param name="seconds"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpanPretty.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="days"></param>
            <param name="hours"></param>
            <param name="minutes"></param>
            <param name="seconds"></param>
            <param name="milliseconds"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpanPretty.ToString">
            <summary>
            Creates extra-nice timespan formats
            </summary>
            <returns>Humanly readable timespans</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Utility.DbaValidatePatternAttribute">
            <summary>
            Validates that each parameter argument matches the RegexPattern
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaValidatePatternAttribute.RegexPattern">
            <summary>
            Gets the Regex pattern to be used in the validation
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaValidatePatternAttribute.Options">
            <summary>
            Gets or sets the Regex options to be used in the validation
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaValidatePatternAttribute.ErrorMessage">
             <summary>
             Gets or sets the custom error message pattern that is displayed to the user.
            
             The text representation of the object being validated and the validating regex is passed as
             the first and second formatting parameters to the ErrorMessage formatting pattern.
             <example>
             [ValidatePattern("\s+", ErrorMessage="The text '{0}' did not pass validation of regex '{1}'")]
             </example>
             </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaValidatePatternAttribute.ValidateElement(System.Object)">
            <summary>
            Validates that each parameter argument matches the RegexPattern
            </summary>
            <param name="element">object to validate</param>
            <exception cref="T:System.Management.Automation.ValidationMetadataException">if <paramref name="element"/> is not a string
             that matches the pattern
             and for invalid arguments</exception>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaValidatePatternAttribute.#ctor(System.String)">
            <summary>
            Initializes a new instance of the PsfValidatePatternAttribute class
            </summary>
            <param name="regexPattern">Pattern string to match</param>
            <exception cref="T:System.ArgumentException">for invalid arguments</exception>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Utility.DbaValidateScriptAttribute">
            <summary>
            Class for validating against a script block.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaValidateScriptAttribute.ErrorMessage">
             <summary>
             Gets or sets the custom error message that is displayed to the user.
            
             The item being validated and the validating scriptblock is passed as the first and second
             formatting argument.
            
             <example>
             [ValidateScript("$_ % 2", ErrorMessage = "The item '{0}' did not pass validation of script '{1}'")]
             </example>
             </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaValidateScriptAttribute.ScriptBlock">
            <summary>
            Gets the scriptblock to be used in the validation
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaValidateScriptAttribute.ValidateElement(System.Object)">
            <summary>
            Validates that each parameter argument matches the scriptblock
            </summary>
            <param name="element">object to validate</param>
            <exception cref="T:System.Management.Automation.ValidationMetadataException">if <paramref name="element"/> is invalid</exception>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaValidateScriptAttribute.#ctor(System.Management.Automation.ScriptBlock)">
            <summary>
            Initializes a new instance of the ValidateScriptBlockAttribute class
            </summary>
            <param name="scriptBlock">Scriptblock to match</param>
            <exception cref="T:System.ArgumentException">for invalid arguments</exception>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Utility.RegexHelper">
            <summary>
            Static class that holds useful regex patterns, ready for use
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.HostName">
            <summary>
            Pattern that checks for a valid hostname
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.HostNameEx">
            <summary>
            Pattern that checks for valid hostnames within a larger text
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.IPv4">
            <summary>
            Pattern that checks for a valid IPv4 address
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.IPv4Ex">
            <summary>
            Pattern that checks for valid IPv4 addresses within a larger text
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.IPv6">
            <summary>
            Will match a valid IPv6 address
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.IPv6Ex">
            <summary>
            Will match any IPv6 address within a larger text
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.ComputerTarget">
            <summary>
            Will match any string that in its entirety represents a valid target for dns- or ip-based targeting. Combination of HostName, IPv4 and IPv6
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.Guid">
            <summary>
            Will match a valid Guid
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.GuidEx">
            <summary>
            Will match any number of valid Guids in a larger text
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.InstanceName">
            <summary>
            Will match a mostly valid instance name.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.InstanceNameEx">
            <summary>
            Will match any instance of a mostly valid instance name.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.SqlReservedKeyword">
            <summary>
            Matches a word against the list of officially reserved keywords
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.SqlReservedKeywordEx">
            <summary>
            Will match any reserved keyword in a larger text
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.SqlReservedKeywordOdbc">
            <summary>
            Matches a word against the list of officially reserved keywords for odbc
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.SqlReservedKeywordOdbcEx">
            <summary>
            Will match any reserved odbc-keyword in a larger text
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.SqlReservedKeywordFuture">
            <summary>
            Matches a word against the list of keywords that are likely to become reserved in the future
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.SqlReservedKeywordFutureEx">
            <summary>
            Will match against the list of keywords that are likely to become reserved in the future and are used in a larger text
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Utility.Size">
            <summary>
            Class that reports File size.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.Size.Byte">
            <summary>
            Number of bytes contained in whatever object uses this object as a property
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.Size.Kilobyte">
            <summary>
            Kilobyte representation of the bytes
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.Size.Megabyte">
            <summary>
            Megabyte representation of the bytes
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.Size.Gigabyte">
            <summary>
            Gigabyte representation of the bytes
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.Size.Terabyte">
            <summary>
            Terabyte representation of the bytes
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.Size.Digits">
            <summary>
            Number if digits behind the dot.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.Size.Style">
            <summary>
            How the size object should be displayed.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.ToString">
            <summary>
            Shows the default string representation of size
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.Equals(System.Object)">
            <summary>
            Simple equality test
            </summary>
            <param name="obj">The object to test it against</param>
            <returns>True if equal, false elsewise</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.GetHashCode">
            <inheritdoc cref="M:System.Int64.GetHashCode"/>
            <remarks>The hashcode of the underlying size</remarks>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.#ctor">
            <summary>
            Creates an empty size.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.#ctor(System.Int64)">
            <summary>
            Creates a size with some content
            </summary>
            <param name="Byte">The length in bytes to set the size to</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.CompareTo(Sqlcollaborative.Dbatools.Utility.Size)">
            <inheritdoc cref="M:System.IComparable`1.CompareTo(`0)"/>
            <remarks>For sorting</remarks>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.CompareTo(System.Object)">
            <inheritdoc cref="M:System.IComparable.CompareTo(System.Object)"/>
            <remarks>For sorting</remarks>
            <exception cref="T:System.ArgumentException">If you compare with something invalid.</exception>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.op_Addition(Sqlcollaborative.Dbatools.Utility.Size,Sqlcollaborative.Dbatools.Utility.Size)">
            <summary>
            Adds two sizes
            </summary>
            <param name="a">The first size to add</param>
            <param name="b">The second size to add</param>
            <returns>The sum of both sizes</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.op_Subtraction(Sqlcollaborative.Dbatools.Utility.Size,Sqlcollaborative.Dbatools.Utility.Size)">
            <summary>
            Substracts two sizes
            </summary>
            <param name="a">The first size to substract</param>
            <param name="b">The second size to substract</param>
            <returns>The difference between both sizes</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.op_Multiply(Sqlcollaborative.Dbatools.Utility.Size,System.Double)">
            <summary>
            Multiplies two sizes with each other
            </summary>
            <param name="a">The size to multiply</param>
            <param name="b">The size to multiply with</param>
            <returns>A multiplied size.</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.op_Division(Sqlcollaborative.Dbatools.Utility.Size,System.Double)">
            <summary>
            Divides one size by another. 
            </summary>
            <param name="a">The size to divide</param>
            <param name="b">The size to divide with</param>
            <returns>Divided size (note: Cut off)</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.op_Multiply(Sqlcollaborative.Dbatools.Utility.Size,Sqlcollaborative.Dbatools.Utility.Size)">
            <summary>
            Multiplies two sizes with each other
            </summary>
            <param name="a">The size to multiply</param>
            <param name="b">The size to multiply with</param>
            <returns>A multiplied size.</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.op_Division(Sqlcollaborative.Dbatools.Utility.Size,Sqlcollaborative.Dbatools.Utility.Size)">
            <summary>
            Divides one size by another.
            </summary>
            <param name="a">The size to divide</param>
            <param name="b">The size to divide with</param>
            <returns>Divided size (note: Cut off)</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.op_Implicit(System.Int32)~Sqlcollaborative.Dbatools.Utility.Size">
            <summary>
            Implicitly converts int to size
            </summary>
            <param name="a">The number to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.op_Implicit(System.Decimal)~Sqlcollaborative.Dbatools.Utility.Size">
            <summary>
            Implicitly converts int to size
            </summary>
            <param name="a">The number to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.op_Implicit(Sqlcollaborative.Dbatools.Utility.Size)~System.Int32">
            <summary>
            Implicitly converts size to int
            </summary>
            <param name="a">The size to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.op_Implicit(System.Int64)~Sqlcollaborative.Dbatools.Utility.Size">
            <summary>
            Implicitly converts long to size
            </summary>
            <param name="a">The number to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.op_Implicit(Sqlcollaborative.Dbatools.Utility.Size)~System.Int64">
            <summary>
            Implicitly converts size to long
            </summary>
            <param name="a">The size to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.op_Implicit(System.String)~Sqlcollaborative.Dbatools.Utility.Size">
            <summary>
            Implicitly converts string to size
            </summary>
            <param name="a">The string to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.op_Implicit(System.Double)~Sqlcollaborative.Dbatools.Utility.Size">
            <summary>
            Implicitly converts double to size
            </summary>
            <param name="a">The number to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.op_Implicit(Sqlcollaborative.Dbatools.Utility.Size)~System.Double">
            <summary>
            Implicitly converts size to double
            </summary>
            <param name="a">The size to convert</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Utility.SizeStyle">
            <summary>
            How size objects should be displayed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.SizeStyle.Dynamic">
            <summary>
            The size object is styled dependend on the number stored within.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.SizeStyle.Plain">
            <summary>
            The size object is shown as a plain number
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.SizeStyle.Byte">
            <summary>
            The size object is styled as a byte number
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.SizeStyle.Kilobyte">
            <summary>
            The size object is styled as a kilobyte number
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.SizeStyle.Megabyte">
            <summary>
            The size object is styled as a megabyte number
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.SizeStyle.Gigabyte">
            <summary>
            The size object is styled as a Gigabyte number
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.SizeStyle.Terabyte">
            <summary>
            The size object is styled as a Terabyte number
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Utility.UtilityHost">
            <summary>
            Provides static resources to utility-namespaced stuff
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.UtilityHost.DisableCustomDateTime">
            <summary>
            Restores all DateTime objects to their default display behavior
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.UtilityHost.DisableCustomTimeSpan">
            <summary>
            Restores all timespan objects to their default display behavior.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.UtilityHost.FormatDate">
            <summary>
            Formating string for date-style datetime objects.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.UtilityHost.FormatDateTime">
            <summary>
            Formating string for datetime-style datetime objects
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.UtilityHost.FormatTime">
            <summary>
            Formating string for time-style datetime objects
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.UtilityHost.SizeDigits">
            <summary>
            The number of digits a size object shows by default
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.UtilityHost.SizeStyle">
            <summary>
            The way size objects are usually displayed
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.UtilityHost.IsLike(System.String,System.String,System.Boolean)">
            <summary>
            Implement's VB's Like operator logic.
            </summary>
            <param name="CaseSensitive">Whether the comparison is case sensitive</param>
            <param name="Pattern">The pattern the string is compared with</param>
            <param name="String">The string that is being compared with a pattern</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.UtilityHost.CompressString(System.String)">
            <summary>
            Compress string using default zip algorithms
            </summary>
            <param name="String">The string to compress</param>
            <returns>Returns a compressed string.</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.UtilityHost.ExpandString(System.String)">
            <summary>
            Expand a string using default zig algorithms
            </summary>
            <param name="CompressedString">The compressed string to expand</param>
            <returns>Returns an expanded string.</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.UtilityHost.CharListToSet(System.String)">
            <summary>
            Converts a string of characters to a HashSet of characters. If the string
            contains character ranges, such as A-Z, all characters in the range are
            also added to the returned set of characters.
            </summary>
            <param name="charList">Character list string</param>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.UtilityHost.Callstack">
            <summary>
            Returns the current callstack
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.UtilityHost._CallstackNew">
            <summary>
            Returns the current callstack on PS4+
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.UtilityHost._CallstackOld">
            <summary>
            Returns the current callstack on PS3
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Utility.Validation">
            <summary>
            Provides helper methods that aid in validating stuff.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Validation.IsLocalhost(System.String)">
            <summary>
            Tests whether a given string is the local host.
            Does NOT use DNS resolution, DNS aliases will NOT be recognized!
            </summary>
            <param name="Name">The name to test for being local host</param>
            <returns>Whether the name is localhost</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Validation.IsRecommendedInstanceName(System.String)">
            <summary>
            Tests whether a given string is a recommended instance name. Recommended names musst be legal, nbot on the ODBC list and not on the list of words likely to become reserved keywords in the future.
            </summary>
            <param name="InstanceName">The name to test. MAY contain server name, but will NOT test the server.</param>
            <returns>Whether the name is recommended</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Validation.IsValidComputerTarget(System.String)">
            <summary>
            Tests whether a given string is a valid target for targeting as a computer. Will first convert from idn name.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Validation.IsValidInstanceName(System.String,System.Boolean)">
            <summary>
            Tests whether a given string is a valid instance name.
            </summary>
            <param name="InstanceName">The name to test. MAY contain server name, but will NOT test the server.</param>
            <param name="Lenient">Setting this to true will make the validation ignore default and mssqlserver as illegal names (as they are illegal names for named instances, but legal for targeting)</param>
            <returns>Whether the name is legal</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Validation.LinkedServerResult">
            <summary>
            The results of testing linked server connectivity as seen from the server that was linked to.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Validation.LinkedServerResult.ComputerName">
            <summary>
            The name of the server running the tests
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Validation.LinkedServerResult.InstanceName">
            <summary>
            The name of the instance running the tests
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Validation.LinkedServerResult.SqlInstance">
            <summary>
            The full name of the instance running the tests
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Validation.LinkedServerResult.LinkedServerName">
            <summary>
            The name of the linked server, the connectivity with whom was tested
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Validation.LinkedServerResult.RemoteServer">
            <summary>
            The name of the remote computer running the linked server.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Validation.LinkedServerResult.Connectivity">
            <summary>
            The test result
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Validation.LinkedServerResult.Result">
            <summary>
            Text interpretation of the result. Contains error messages if the test failed.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Validation.LinkedServerResult.#ctor">
            <summary>
            Creates an empty object
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Validation.LinkedServerResult.#ctor(System.String,System.String,System.String,System.String,System.String,System.Boolean,System.String)">
            <summary>
            Creates a test result with prefilled values
            </summary>
            <param name="ComputerName">The name of the server running the tests</param>
            <param name="InstanceName">The name of the instance running the tests</param>
            <param name="SqlInstance">The full name of the instance running the tests</param>
            <param name="LinkedServerName">The name of the linked server, the connectivity with whom was tested</param>
            <param name="RemoteServer">The name of the remote computer running the linked server.</param>
            <param name="Connectivity">The test result</param>
            <param name="Result">Text interpretation of the result. Contains error messages if the test failed.</param>
        </member>
    </members>
</doc>

tools\dbatools\bin\perfmontemplates\collectorsets.xml

<Objs Version="1.1.0.1" xmlns="http://schemas.microsoft.com/powershell/2004/04">
  <Obj RefId="0">
    <TN RefId="0">
      <T>Deserialized.System.Management.Automation.PSCustomObject</T>
      <T>Deserialized.System.Object</T>
    </TN>
    <MS>
      <S N="Name">Long Running Queries</S>
      <S N="Source">Brad McGehee</S>
    </MS>
  </Obj>
  <Obj RefId="1">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">PAL - SQL Server 2005</S>
      <S N="Source">Clint Huffman</S>
    </MS>
  </Obj>
  <Obj RefId="2">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">PAL - SQL Server 2008 and R2</S>
      <S N="Source">Clint Huffman</S>
    </MS>
  </Obj>
  <Obj RefId="3">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">PAL - SQL Server 2012</S>
      <S N="Source">Clint Huffman</S>
    </MS>
  </Obj>
  <Obj RefId="4">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">PAL - SQL Server 2014 and Up</S>
      <S N="Source">Clint Huffman</S>
    </MS>
  </Obj>
</Objs>

tools\dbatools\bin\net452\dbatools.pdb

tools\dbatools\bin\net452\dbatools.dll

md5: 06F6DB200D28C91D1E68F4C18C9102C9 | sha1: 3D72A105EFA68845B1CDBEEEEAD76DA7ACF160DB | sha256: C1A33D435B99AA2B9C8ADCA482CC7387DCC0A391819C4C6CA3359E1F349A1B25 | sha512: 8F7F17D4454EA33C31C0041B0006E8774A6E0C1A97F7218B72C1435CBA71E3BA9ADEB5917FEACC003B97A1C63DDB9ADC4EA0CA4D001C12650256EC5E3E3E598F

tools\dbatools\bin\library.ps1

# Current library Version the module expects
$currentLibraryVersion = New-Object System.Version(0, 10, 0, 70)

<#
Library Versioning 101:
The version consists of 4 segments: Major, Minor, Build, Revision

Major: Should always be equal to the main version number of the dbatools PowerShell project.
Minor: Tracks major features within a major release. Increment on new features or significant structural changes. Reset to 0 when incrementing the major version.
Build: Tracks lesser functionality upgrades. Increment on all minor upgrades, reset to 0 when introducing a new major feature or major version.
Revision: Tracks all changes. Every single update to the library - bugfix, feature or redesign - increments the revision counter. It is never reset to 0.

Updating the library version number:
When changing the library version number, it is necessary to do so in TWO places:
- At the top of this very library.ps1
- Within AssemblyInfo.cs
These two locations MUST have matching version numbers, otherwise it will keep building the library and complaining about version mismatch!
#>

<#
#---------------------------------#
# Runtime configuration variables #
#---------------------------------#

The library recognizes a few external variables in order to customize its behavior on import.

$dbatools_strictsecuritymode
Setting this to $true will cause dbatools to always load the library directly from the module directory.
This is more secure, but less convenient when it comes to updating the module, as all consoles using it must be closed.

$dbatools_alwaysbuildlibrary
Setting this to $true will cause the module to always build the library from source, rather than reuse the binaries.
Mostly for developers working on the library.

#>

#region Test whether the module had already been imported
if (([System.Management.Automation.PSTypeName]'Sqlcollaborative.Dbatools.Configuration.Config').Type) {
    # No need to load the library again, if the module was once already imported.
    Write-Verbose -Message "Library already loaded, will not load again"
    $ImportLibrary = $false
} else {
    Write-Verbose -Message "Library not present already, will import"
    $ImportLibrary = $true
}
#endregion Test whether the module had already been imported

$libraryBase = (Resolve-Path -Path ($ExecutionContext.SessionState.Module.ModuleBase + "\bin"))

if ($PSVersionTable.PSVersion.Major -ge 6) {
    $dll = (Resolve-Path -Path "$libraryBase\netcoreapp2.1\dbatools.dll" -ErrorAction Ignore)
} else {
    $dll = (Resolve-Path -Path "$libraryBase\net452\dbatools.dll" -ErrorAction Ignore)
}

if ($ImportLibrary) {
    #region Add Code
    try {
        # In strict security mode, only load from the already pre-compiled binary within the module
        if ($script:strictSecurityMode) {
            if (Test-Path -Path $dll) {
                Add-Type -Path $dll -ErrorAction Stop
            } else {
                throw "Library not found, terminating!"
            }
        }
        # Else we prioritize user convenience
else {
            try {
                $sln = (Resolve-Path -Path "$libraryBase\projects\dbatools\dbatools.sln" -ErrorAction Stop)
                $hasProject = Test-Path -Path $sln -ErrorAction Stop
            } catch {
                $null = 1
            }
            
            if (-not $dll) {
                $hasCompiledDll = $false
            } else {
                $hasCompiledDll = Test-Path -Path $dll -ErrorAction Stop
            }
            
            $reslibdll = Resolve-Path -Path "$libraryBase\dbatools.dll"
            
            if ((-not $script:alwaysBuildLibrary) -and $hasCompiledDll -and ([System.Diagnostics.FileVersionInfo]::GetVersionInfo($reslibdll).FileVersion -eq $currentLibraryVersion)) {
                $start = Get-Date
                
                try {
                    $libraryBase = Resolve-Path -Path "$libraryBase\"
                    $script:DllRoot = Resolve-Path -Path $script:DllRoot
                    Write-Verbose -Message "Found library, trying to copy & import"
                    # this looks excessive but for some reason the explicit string to string is required
                    if (("$($dll)" -ne "$(Join-Path -Path $script:DllRoot -ChildPath dbatools.dll)") -and $script:isWindows) {
                        Copy-Item -Path $dll -Destination $script:DllRoot -Force -ErrorAction Stop
                    }
                    Add-Type -Path (Resolve-Path -Path "$script:DllRoot\dbatools.dll") -ErrorAction Stop
                } catch {
                    Write-Verbose -Message "Failed to copy and import, attempting to import straight from the module directory"
                    Add-Type -Path $dll -ErrorAction Stop
                }
                Write-Verbose -Message "Total duration: $((Get-Date) - $start)"
            } elseif ($hasProject) {
                . Import-ModuleFile (Resolve-Path -Path "$($script:PSModuleRoot)\bin\build-project.ps1")
            } else {
                throw "No valid dbatools library found! Check your module integrity"
            }
        }
        
        #region PowerShell TypeData
        Update-TypeData -TypeName "Sqlcollaborative.Dbatools.dbaSystem.DbatoolsException" -SerializationDepth 2 -ErrorAction Ignore
        Update-TypeData -TypeName "Sqlcollaborative.Dbatools.dbaSystem.DbatoolsExceptionRecord" -SerializationDepth 2 -ErrorAction Ignore
        #endregion PowerShell TypeData
    } catch {
        #region Warning
        Write-Verbose @'
Dear User,

in the name of the dbatools team I apologize for the inconvenience.
Generally, when something goes wrong we try to handle and interpret in an
understandable manner. Unfortunately, something went awry with importing
our main library, so all the systems making this possible would not be initialized
yet. We have taken great pains to avoid this issue but this notification indicates
we have failed.

Please, in order to help us prevent this from happening again, visit us at:
https://github.com/sqlcollaborative/dbatools/issues
and tell us about this failure. All information will be appreciated, but
especially valuable are:
- Exports of the exception: $Error | Export-Clixml error.xml -Depth 4
- Screenshots
- Environment information (Operating System, Hardware Stats, .NET Version,
  PowerShell Version and whatever else you may consider of potential impact.)

Again, I apologize for the inconvenience and hope we will be able to speedily
resolve the issue.

Best Regards,
Friedrich Weinmann
aka "The guy who made most of The Library that Failed to import"

'@
        throw
        #endregion Warning
    }
    #endregion Add Code
}

#region Version Warning
if ($currentLibraryVersion -ne ([version](([AppDomain]::CurrentDomain.GetAssemblies() | Where-Object ManifestModule -like "dbatools.dll").CustomAttributes | Where-Object AttributeType -like "System.Reflection.AssemblyFileVersionAttribute").ConstructorArguments.Value)) {
    Write-Verbose @"
A version missmatch between the dbatools library loaded and the one expected by
this module. This usually happens when you update the dbatools module and use
Remove-Module / Import-Module in order to load the latest version without
starting a new PowerShell instance.

Please restart the console to apply the library update, or unexpected behavior will likely occur.

If the issues continue to persist, please Remove-Item '$script:PSModuleRoot\bin\dbatools.dll'
"@
}
#endregion Version Warning

tools\dbatools\bin\perfmontemplates\collectorsets\PAL - SQL Server 2012.xml

<DataCollectorSet>
<Name>PAL - SQL Server 2012</Name>
<DisplayName>PAL - SQL Server 2012</DisplayName>
<DisplayNameUnresolved>PAL - SQL Server 2012</DisplayNameUnresolved>
<Description>Data Collector Sets from PAL, a performance monitor data aggregation tool by Microsoft. The toolset was created by Microsoft PFE Clint Huffman who worked with fellow experts to create a list specialized lists of counters. You can find the project at github.com/clinthuffman/PAL</Description>
<DescriptionUnresolved>Data Collector Sets from PAL, a performance monitor data aggregation tool by Microsoft. The toolset was created by Microsoft PFE Clint Huffman who worked with fellow experts to create a list specialized lists of counters. You can find the project at github.com/clinthuffman/PAL</DescriptionUnresolved>
<SubdirectoryFormat>3</SubdirectoryFormat>
<SubdirectoryFormatPattern>yyyyMMdd\-NNNNNN</SubdirectoryFormatPattern>
<PerformanceCounterDataCollector>
    <Name>PAL - SQL Server 2012 Collector</Name>
    <SampleInterval>15</SampleInterval>
    <Counter>\Cache\Dirty Pages</Counter>
    <Counter>\Cache\Lazy Write Flushes/sec</Counter>
    <Counter>\LogicalDisk(*)\% Free Space</Counter>
    <Counter>\LogicalDisk(*)\% Idle Time</Counter>
    <Counter>\LogicalDisk(*)\Avg. Disk Bytes/Read</Counter>
    <Counter>\LogicalDisk(*)\Avg. Disk Bytes/Transfer</Counter>
    <Counter>\LogicalDisk(*)\Avg. Disk Bytes/Write</Counter>
    <Counter>\LogicalDisk(*)\Avg. Disk Queue Length</Counter>
    <Counter>\LogicalDisk(*)\Avg. Disk sec/Read</Counter>
    <Counter>\LogicalDisk(*)\Avg. Disk sec/Transfer</Counter>
    <Counter>\LogicalDisk(*)\Avg. Disk sec/Write</Counter>
    <Counter>\LogicalDisk(*)\Current Disk Queue Length</Counter>
    <Counter>\LogicalDisk(*)\Disk Bytes/sec</Counter>
    <Counter>\LogicalDisk(*)\Disk Reads/sec</Counter>
    <Counter>\LogicalDisk(*)\Disk Transfers/sec</Counter>
    <Counter>\LogicalDisk(*)\Disk Writes/sec</Counter>
    <Counter>\LogicalDisk(*)\Free Megabytes</Counter>
    <Counter>\Memory\% Committed Bytes In Use</Counter>
    <Counter>\Memory\Available MBytes</Counter>
    <Counter>\Memory\Commit Limit</Counter>
    <Counter>\Memory\Committed Bytes</Counter>
    <Counter>\Memory\Free &amp; Zero Page List Bytes</Counter>
    <Counter>\Memory\Free System Page Table Entries</Counter>
    <Counter>\Memory\Long-Term Average Standby Cache Lifetime (s)</Counter>
    <Counter>\Memory\Pages Input/sec</Counter>
    <Counter>\Memory\Pages Output/sec</Counter>
    <Counter>\Memory\Pages/sec</Counter>
    <Counter>\Memory\Pool Nonpaged Bytes</Counter>
    <Counter>\Memory\Pool Paged Bytes</Counter>
    <Counter>\Memory\Pool Paged Resident Bytes</Counter>
    <Counter>\Memory\System Cache Resident Bytes</Counter>
    <Counter>\Memory\Transition Pages RePurposed/sec</Counter>
    <Counter>\MSRS 2011 Web Service\Cache Misses/Sec</Counter>
    <Counter>\MSRS 2011 Web Service\Report Requests</Counter>
    <Counter>\MSRS 2011 Web Service\Total Memory Cache Misses</Counter>
    <Counter>\MSRS 2011 Web Service\Total Requests</Counter>
    <Counter>\Network Inspection System\Average inspection latency (sec/bytes)</Counter>
    <Counter>\Network Interface(*)\Bytes Received/sec</Counter>
    <Counter>\Network Interface(*)\Bytes Sent/sec</Counter>
    <Counter>\Network Interface(*)\Bytes Total/sec</Counter>
    <Counter>\Network Interface(*)\Current Bandwidth</Counter>
    <Counter>\Network Interface(*)\Output Queue Length</Counter>
    <Counter>\Network Interface(*)\Packets Outbound Errors</Counter>
    <Counter>\Network Interface(*)\Packets Received/sec</Counter>
    <Counter>\Network Interface(*)\Packets Sent/sec</Counter>
    <Counter>\Network Interface(*)\Packets/sec</Counter>
    <Counter>\Paging File(*)\% Usage</Counter>
    <Counter>\PhysicalDisk(*)\Avg. Disk Queue Length</Counter>
    <Counter>\PhysicalDisk(*)\Avg. Disk sec/Read</Counter>
    <Counter>\PhysicalDisk(*)\Avg. Disk sec/Write</Counter>
    <Counter>\PhysicalDisk(*)\Current Disk Queue Length</Counter>
    <Counter>\PhysicalDisk(*)\Disk Bytes/sec</Counter>
    <Counter>\Process(*)\Handle Count</Counter>
    <Counter>\Process(*)\ID Process</Counter>
    <Counter>\Process(*)\IO Data Operations/sec</Counter>
    <Counter>\Process(*)\IO Other Operations/sec</Counter>
    <Counter>\Process(*)\IO Read Operations/sec</Counter>
    <Counter>\Process(*)\IO Write Operations/sec</Counter>
    <Counter>\Process(*)\Private Bytes</Counter>
    <Counter>\Process(*)\Thread Count</Counter>
    <Counter>\Process(*)\Virtual Bytes</Counter>
    <Counter>\Process(*)\Working Set</Counter>
    <Counter>\Process(sqlservr)\% Privileged Time</Counter>
    <Counter>\Process(sqlservr)\% Processor Time</Counter>
    <Counter>\Processor Information(*)\% DPC Time</Counter>
    <Counter>\Processor Information(*)\% Interrupt Time</Counter>
    <Counter>\Processor Information(*)\% of Maximum Frequency</Counter>
    <Counter>\Processor Information(*)\% Privileged Time</Counter>
    <Counter>\Processor Information(*)\% Processor Time</Counter>
    <Counter>\Processor Information(*)\% User Time</Counter>
    <Counter>\Processor Information(*)\DPC Rate</Counter>
    <Counter>\Processor Information(*)\Parking Status</Counter>
    <Counter>\Processor(*)\% DPC Time</Counter>
    <Counter>\Processor(*)\% Interrupt Time</Counter>
    <Counter>\Processor(*)\% Privileged Time</Counter>
    <Counter>\Processor(*)\% Processor Time</Counter>
    <Counter>\Processor(*)\% User Time</Counter>
    <Counter>\Processor(*)\DPC Rate</Counter>
    <Counter>\ReportServer:Service\Errors Total</Counter>
    <Counter>\ReportServer:Service\Errors/sec</Counter>
    <Counter>\ReportServer:Service\Memory Pressure State</Counter>
    <Counter>\ReportServer:Service\Memory Shrink Amount</Counter>
    <Counter>\ReportServer:Service\Memory Shrink Notifications/sec</Counter>
    <Counter>\Server\Pool Nonpaged Failures</Counter>
    <Counter>\Server\Pool Paged Failures</Counter>
    <Counter>\SQLAgent:Jobs\Active jobs</Counter>
    <Counter>\SQLAgent:Jobs\Failed jobs</Counter>
    <Counter>\SQLAgent:Jobs\Job success rate</Counter>
    <Counter>\SQLAgent:Jobs\Successful jobs</Counter>
    <Counter>\SQLAgent:JobSteps\Active steps</Counter>
    <Counter>\SQLAgent:JobSteps\Total step retries</Counter>
    <Counter>\SQLServer:Access Methods\Forwarded Records/sec</Counter>
    <Counter>\SQLServer:Access Methods\FreeSpace Scans/sec</Counter>
    <Counter>\SQLServer:Access Methods\Full Scans/sec</Counter>
    <Counter>\SQLServer:Access Methods\Index Searches/sec</Counter>
    <Counter>\SQLServer:Access Methods\Page Splits/sec</Counter>
    <Counter>\SQLServer:Access Methods\Scan Point Revalidations/sec</Counter>
    <Counter>\SQLServer:Access Methods\Table Lock Escalations/sec</Counter>
    <Counter>\SQLServer:Access Methods\Workfiles Created/sec</Counter>
    <Counter>\SQLServer:Access Methods\Worktables Created/sec</Counter>
    <Counter>\SQLServer:Access Methods\Worktables From Cache Ratio</Counter>
    <Counter>\SQLServer:Availability Replica(*)\Bytes Received from Replica/sec</Counter>
    <Counter>\SQLServer:Availability Replica(*)\Bytes Sent to Replica/sec</Counter>
    <Counter>\SQLServer:Availability Replica(*)\Bytes Sent to Transport/sec</Counter>
    <Counter>\SQLServer:Availability Replica(_Total)\Receives from Replica/sec</Counter>
    <Counter>\SQLServer:Availability Replica(_Total)\Resent Messages/sec</Counter>
    <Counter>\SQLServer:Availability Replica(_Total)\Sends to Replica/sec</Counter>
    <Counter>\SQLServer:Buffer Manager\Background writer pages/sec</Counter>
    <Counter>\SQLServer:Buffer Manager\Buffer cache hit ratio</Counter>
    <Counter>\SQLServer:Buffer Manager\Checkpoint pages/sec</Counter>
    <Counter>\SQLServer:Buffer Manager\Free list stalls/sec</Counter>
    <Counter>\SQLServer:Buffer Manager\Free pages</Counter>
    <Counter>\SQLServer:Buffer Manager\Lazy writes/sec</Counter>
    <Counter>\SQLServer:Buffer Manager\Page life expectancy</Counter>
    <Counter>\SQLServer:Buffer Manager\Page lookups/sec</Counter>
    <Counter>\SQLServer:Buffer Manager\Page reads/sec</Counter>
    <Counter>\SQLServer:Buffer Manager\Page writes/sec</Counter>
    <Counter>\SQLServer:Buffer Manager\Readahead pages/sec</Counter>
    <Counter>\SQLServer:Buffer Manager\Target pages</Counter>
    <Counter>\SQLServer:Buffer Node(*)\Database pages</Counter>
    <Counter>\SQLServer:Buffer Node(*)\Foreign pages</Counter>
    <Counter>\SQLServer:Buffer Node(*)\Local node page lookups/sec</Counter>
    <Counter>\SQLServer:Buffer Node(*)\Page life expectancy</Counter>
    <Counter>\SQLServer:Buffer Node(*)\Remote node page lookups/sec</Counter>
    <Counter>\SQLServer:Database Replica(*)\Log Bytes Received/sec</Counter>
    <Counter>\SQLServer:Database Replica(*)\Mirrored Write Transactions/sec</Counter>
    <Counter>\SQLServer:Database Replica(*)\Recovery Queue</Counter>
    <Counter>\SQLServer:Database Replica(_Total)\Log remaining for undo</Counter>
    <Counter>\SQLServer:Database Replica(_Total)\Log Send Queue</Counter>
    <Counter>\SQLServer:Database Replica(_Total)\Redo blocked/sec</Counter>
    <Counter>\SQLServer:Database Replica(_Total)\Redo Bytes Remaining</Counter>
    <Counter>\SQLServer:Database Replica(_Total)\Redone Bytes/sec</Counter>
    <Counter>\SQLServer:Database Replica(_Total)\Total Log requiring undo</Counter>
    <Counter>\SQLServer:Database Replica(_Total)\Transaction Delay</Counter>
    <Counter>\SQLServer:Databases(*)\Active Transactions</Counter>
    <Counter>\SQLServer:Databases(*)\Backup/Restore Throughput/sec</Counter>
    <Counter>\SQLServer:Databases(*)\Bulk Copy Throughput/sec</Counter>
    <Counter>\SQLServer:Databases(*)\Data File(s) Size (KB)</Counter>
    <Counter>\SQLServer:Databases(*)\Log Bytes Flushed/sec</Counter>
    <Counter>\SQLServer:Databases(*)\Log File(s) Size (KB)</Counter>
    <Counter>\SQLServer:Databases(*)\Log File(s) Used Size (KB)</Counter>
    <Counter>\SQLServer:Databases(*)\Log Flush Wait Time</Counter>
    <Counter>\SQLServer:Databases(*)\Log Flush Waits/sec</Counter>
    <Counter>\SQLServer:Databases(*)\Log Flushes/sec</Counter>
    <Counter>\SQLServer:Databases(*)\Log Growths</Counter>
    <Counter>\SQLServer:Databases(*)\Log Shrinks</Counter>
    <Counter>\SQLServer:Databases(*)\Log Truncations</Counter>
    <Counter>\SQLServer:Databases(*)\Percent Log Used</Counter>
    <Counter>\SQLServer:Deprecated Features(*)\Usage</Counter>
    <Counter>\SQLServer:General Statistics\Active Temp Tables</Counter>
    <Counter>\SQLServer:General Statistics\Logins/sec</Counter>
    <Counter>\SQLServer:General Statistics\Logouts/sec</Counter>
    <Counter>\SQLServer:General Statistics\Temp Tables Creation Rate</Counter>
    <Counter>\SQLServer:General Statistics\Temp Tables For Destruction</Counter>
    <Counter>\SQLServer:General Statistics\User Connections</Counter>
    <Counter>\SQLServer:Latches\Latch Waits/sec</Counter>
    <Counter>\SQLServer:Latches\Total Latch Wait Time (ms)</Counter>
    <Counter>\SQLServer:Locks(*)\Average Wait Time (ms)</Counter>
    <Counter>\SQLServer:Locks(*)\Lock Requests/sec</Counter>
    <Counter>\SQLServer:Locks(*)\Lock Timeouts/sec</Counter>
    <Counter>\SQLServer:Locks(*)\Lock Wait Time (ms)</Counter>
    <Counter>\SQLServer:Locks(*)\Lock Waits/sec</Counter>
    <Counter>\SQLServer:Locks(*)\Number of Deadlocks/sec</Counter>
    <Counter>\SQLServer:Memory Manager\Granted Workspace Memory (KB)</Counter>
    <Counter>\SQLServer:Memory Manager\Maximum Workspace Memory (KB)</Counter>
    <Counter>\SQLServer:Memory Manager\Memory Grants Outstanding</Counter>
    <Counter>\SQLServer:Memory Manager\Memory Grants Pending</Counter>
    <Counter>\SQLServer:Memory Manager\Optimizer Memory (KB)</Counter>
    <Counter>\SQLServer:Memory Manager\Stolen Server Memory (KB)</Counter>
    <Counter>\SQLServer:Memory Manager\Target Server Memory (KB)</Counter>
    <Counter>\SQLServer:Memory Manager\Target Server Memory(KB)</Counter>
    <Counter>\SQLServer:Memory Manager\Total Server Memory (KB)</Counter>
    <Counter>\SQLServer:Memory Node(*)\Database Node Memory (KB)</Counter>
    <Counter>\SQLServer:Memory Node(*)\Foreign Node Memory (KB)</Counter>
    <Counter>\SQLServer:Memory Node(*)\Stolen Node Memory (KB)</Counter>
    <Counter>\SQLServer:Memory Node(*)\Target Node Memory (KB)</Counter>
    <Counter>\SQLServer:Memory Node(000)\Total Node Memory (KB)</Counter>
    <Counter>\SQLServer:Plan Cache(*)\Cache Hit Ratio</Counter>
    <Counter>\SQLServer:Resource Pool Stats(*)\CPU usage %</Counter>
    <Counter>\SQLServer:Resource Pool Stats(*)\Max memory (KB)</Counter>
    <Counter>\SQLServer:Resource Pool Stats(*)\Target memory (KB)</Counter>
    <Counter>\SQLServer:Resource Pool Stats(*)\Used memory (KB)</Counter>
    <Counter>\SQLServer:SQL Errors(*)\Errors/sec</Counter>
    <Counter>\SQLServer:SQL Statistics\Auto-Param Attempts/sec</Counter>
    <Counter>\SQLServer:SQL Statistics\Batch Requests/sec</Counter>
    <Counter>\SQLServer:SQL Statistics\Failed Auto-Params/sec</Counter>
    <Counter>\SQLServer:SQL Statistics\Safe Auto-Params/sec</Counter>
    <Counter>\SQLServer:SQL Statistics\SQL Attention rate</Counter>
    <Counter>\SQLServer:SQL Statistics\SQL Compilations/sec</Counter>
    <Counter>\SQLServer:SQL Statistics\SQL Re-Compilations/sec</Counter>
    <Counter>\SQLServer:SQL Statistics\Unsafe Auto-Params/sec</Counter>
    <Counter>\SQLServer:Transactions\Free Space in tempdb (KB)</Counter>
    <Counter>\SQLServer:Transactions\Longest Transaction Running Time</Counter>
    <Counter>\SQLServer:Transactions\NonSnapshot Version Transactions</Counter>
    <Counter>\SQLServer:Transactions\Snapshot Transactions</Counter>
    <Counter>\SQLServer:Transactions\Transactions</Counter>
    <Counter>\SQLServer:Transactions\Version Cleanup rate (KB/s)</Counter>
    <Counter>\SQLServer:Transactions\Version Generation rate (KB/s)</Counter>
    <Counter>\SQLServer:Transactions\Version Store Size (KB)</Counter>
    <Counter>\SQLServer:User Settable(*)\Query</Counter>
    <Counter>\SQLServer:Workload Group Stats(*)\Active parallel threads</Counter>
    <Counter>\SQLServer:Workload Group Stats(*)\Active requests</Counter>
    <Counter>\SQLServer:Workload Group Stats(*)\CPU usage %</Counter>
    <Counter>\SQLServer:Workload Group Stats(*)\Queued requests</Counter>
    <Counter>\SQLServer:Workload Group Stats(*)\Reduced memory grants/sec</Counter>
    <Counter>\SQLServer:Workload Group Stats(*)\Requests completed/sec</Counter>
    <Counter>\SQLServer:Workload Group Stats(*)\Suboptimal plans/sec</Counter>
    <Counter>\System\Context Switches/sec</Counter>
    <Counter>\System\Processor Queue Length</Counter>
    <Counter>\System\System Calls/sec</Counter>
    <Counter>\TCPv4\Connection Failures</Counter>
</PerformanceCounterDataCollector>
</DataCollectorSet>

tools\dbatools\bin\perfmontemplates\collectorsets\PAL - SQL Server 2014 and Up.xml

<DataCollectorSet>
<Name>PAL - SQL Server 2014 and Up</Name>
<DisplayName>PAL - SQL Server 2014 and Up</DisplayName>
<DisplayNameUnresolved>PAL - SQL Server 2014 and Up</DisplayNameUnresolved>
<Description>Data Collector Sets from PAL, a performance monitor data aggregation tool by Microsoft. The toolset was created by Microsoft PFE Clint Huffman who worked with fellow experts to create a list specialized lists of counters. You can find the project at github.com/clinthuffman/PAL</Description>
<DescriptionUnresolved>Data Collector Sets from PAL, a performance monitor data aggregation tool by Microsoft. The toolset was created by Microsoft PFE Clint Huffman who worked with fellow experts to create a list specialized lists of counters. You can find the project at github.com/clinthuffman/PAL</DescriptionUnresolved>
<SubdirectoryFormat>3</SubdirectoryFormat>
<SubdirectoryFormatPattern>yyyyMMdd\-NNNNNN</SubdirectoryFormatPattern>
<PerformanceCounterDataCollector>
    <Name>PAL - SQL Server 2014 and Up Collector</Name>
    <SampleInterval>15</SampleInterval>
    <Counter>\Cache\Dirty Pages</Counter>
    <Counter>\Cache\Lazy Write Flushes/sec</Counter>
    <Counter>\LogicalDisk(*)\% Free Space</Counter>
    <Counter>\LogicalDisk(*)\% Idle Time</Counter>
    <Counter>\LogicalDisk(*)\Avg. Disk Bytes/Read</Counter>
    <Counter>\LogicalDisk(*)\Avg. Disk Bytes/Transfer</Counter>
    <Counter>\LogicalDisk(*)\Avg. Disk Bytes/Write</Counter>
    <Counter>\LogicalDisk(*)\Avg. Disk Queue Length</Counter>
    <Counter>\LogicalDisk(*)\Avg. Disk sec/Read</Counter>
    <Counter>\LogicalDisk(*)\Avg. Disk sec/Transfer</Counter>
    <Counter>\LogicalDisk(*)\Avg. Disk sec/Write</Counter>
    <Counter>\LogicalDisk(*)\Current Disk Queue Length</Counter>
    <Counter>\LogicalDisk(*)\Disk Bytes/sec</Counter>
    <Counter>\LogicalDisk(*)\Disk Reads/sec</Counter>
    <Counter>\LogicalDisk(*)\Disk Transfers/sec</Counter>
    <Counter>\LogicalDisk(*)\Disk Writes/sec</Counter>
    <Counter>\LogicalDisk(*)\Free Megabytes</Counter>
    <Counter>\Memory\% Committed Bytes In Use</Counter>
    <Counter>\Memory\Available MBytes</Counter>
    <Counter>\Memory\Commit Limit</Counter>
    <Counter>\Memory\Committed Bytes</Counter>
    <Counter>\Memory\Free &amp; Zero Page List Bytes</Counter>
    <Counter>\Memory\Free System Page Table Entries</Counter>
    <Counter>\Memory\Long-Term Average Standby Cache Lifetime (s)</Counter>
    <Counter>\Memory\Pages Input/sec</Counter>
    <Counter>\Memory\Pages Output/sec</Counter>
    <Counter>\Memory\Pages/sec</Counter>
    <Counter>\Memory\Pool Nonpaged Bytes</Counter>
    <Counter>\Memory\Pool Paged Bytes</Counter>
    <Counter>\Memory\Pool Paged Resident Bytes</Counter>
    <Counter>\Memory\System Cache Resident Bytes</Counter>
    <Counter>\Memory\Transition Pages RePurposed/sec</Counter>
    <Counter>\MSRS 2011 Web Service\Cache Misses/Sec</Counter>
    <Counter>\MSRS 2011 Web Service\Report Requests</Counter>
    <Counter>\MSRS 2011 Web Service\Total Memory Cache Misses</Counter>
    <Counter>\MSRS 2011 Web Service\Total Requests</Counter>
    <Counter>\Network Inspection System\Average inspection latency (sec/bytes)</Counter>
    <Counter>\Network Interface(*)\Bytes Received/sec</Counter>
    <Counter>\Network Interface(*)\Bytes Sent/sec</Counter>
    <Counter>\Network Interface(*)\Bytes Total/sec</Counter>
    <Counter>\Network Interface(*)\Current Bandwidth</Counter>
    <Counter>\Network Interface(*)\Output Queue Length</Counter>
    <Counter>\Network Interface(*)\Packets Outbound Errors</Counter>
    <Counter>\Network Interface(*)\Packets Received/sec</Counter>
    <Counter>\Network Interface(*)\Packets Sent/sec</Counter>
    <Counter>\Network Interface(*)\Packets/sec</Counter>
    <Counter>\Paging File(*)\% Usage</Counter>
    <Counter>\PhysicalDisk(*)\Avg. Disk Queue Length</Counter>
    <Counter>\PhysicalDisk(*)\Avg. Disk sec/Read</Counter>
    <Counter>\PhysicalDisk(*)\Avg. Disk sec/Write</Counter>
    <Counter>\PhysicalDisk(*)\Current Disk Queue Length</Counter>
    <Counter>\PhysicalDisk(*)\Disk Bytes/sec</Counter>
    <Counter>\Process(*)\Handle Count</Counter>
    <Counter>\Process(*)\ID Process</Counter>
    <Counter>\Process(*)\IO Data Operations/sec</Counter>
    <Counter>\Process(*)\IO Other Operations/sec</Counter>
    <Counter>\Process(*)\IO Read Operations/sec</Counter>
    <Counter>\Process(*)\IO Write Operations/sec</Counter>
    <Counter>\Process(*)\Private Bytes</Counter>
    <Counter>\Process(*)\Thread Count</Counter>
    <Counter>\Process(*)\Virtual Bytes</Counter>
    <Counter>\Process(*)\Working Set</Counter>
    <Counter>\Process(sqlservr)\% Privileged Time</Counter>
    <Counter>\Process(sqlservr)\% Processor Time</Counter>
    <Counter>\Processor Information(*)\% DPC Time</Counter>
    <Counter>\Processor Information(*)\% Interrupt Time</Counter>
    <Counter>\Processor Information(*)\% of Maximum Frequency</Counter>
    <Counter>\Processor Information(*)\% Privileged Time</Counter>
    <Counter>\Processor Information(*)\% Processor Time</Counter>
    <Counter>\Processor Information(*)\% User Time</Counter>
    <Counter>\Processor Information(*)\DPC Rate</Counter>
    <Counter>\Processor Information(*)\Parking Status</Counter>
    <Counter>\Processor(*)\% DPC Time</Counter>
    <Counter>\Processor(*)\% Interrupt Time</Counter>
    <Counter>\Processor(*)\% Privileged Time</Counter>
    <Counter>\Processor(*)\% Processor Time</Counter>
    <Counter>\Processor(*)\% User Time</Counter>
    <Counter>\Processor(*)\DPC Rate</Counter>
    <Counter>\ReportServer:Service\Errors Total</Counter>
    <Counter>\ReportServer:Service\Errors/sec</Counter>
    <Counter>\ReportServer:Service\Memory Pressure State</Counter>
    <Counter>\ReportServer:Service\Memory Shrink Amount</Counter>
    <Counter>\ReportServer:Service\Memory Shrink Notifications/sec</Counter>
    <Counter>\Server\Pool Nonpaged Failures</Counter>
    <Counter>\Server\Pool Paged Failures</Counter>
    <Counter>\SQLAgent:Jobs\Active jobs</Counter>
    <Counter>\SQLAgent:Jobs\Failed jobs</Counter>
    <Counter>\SQLAgent:Jobs\Job success rate</Counter>
    <Counter>\SQLAgent:Jobs\Successful jobs</Counter>
    <Counter>\SQLAgent:JobSteps\Active steps</Counter>
    <Counter>\SQLAgent:JobSteps\Total step retries</Counter>
    <Counter>\SQLServer:Access Methods\Forwarded Records/sec</Counter>
    <Counter>\SQLServer:Access Methods\FreeSpace Scans/sec</Counter>
    <Counter>\SQLServer:Access Methods\Full Scans/sec</Counter>
    <Counter>\SQLServer:Access Methods\Index Searches/sec</Counter>
    <Counter>\SQLServer:Access Methods\Page Splits/sec</Counter>
    <Counter>\SQLServer:Access Methods\Scan Point Revalidations/sec</Counter>
    <Counter>\SQLServer:Access Methods\Table Lock Escalations/sec</Counter>
    <Counter>\SQLServer:Access Methods\Workfiles Created/sec</Counter>
    <Counter>\SQLServer:Access Methods\Worktables Created/sec</Counter>
    <Counter>\SQLServer:Access Methods\Worktables From Cache Ratio</Counter>
    <Counter>\SQLServer:Availability Replica(*)\Bytes Received from Replica/sec</Counter>
    <Counter>\SQLServer:Availability Replica(*)\Bytes Sent to Replica/sec</Counter>
    <Counter>\SQLServer:Availability Replica(*)\Bytes Sent to Transport/sec</Counter>
    <Counter>\SQLServer:Availability Replica(_Total)\Receives from Replica/sec</Counter>
    <Counter>\SQLServer:Availability Replica(_Total)\Resent Messages/sec</Counter>
    <Counter>\SQLServer:Availability Replica(_Total)\Sends to Replica/sec</Counter>
    <Counter>\SQLServer:Buffer Manager(*)\Extension page unreferenced time</Counter>
    <Counter>\SQLServer:Buffer Manager\Background writer pages/sec</Counter>
    <Counter>\SQLServer:Buffer Manager\Buffer cache hit ratio</Counter>
    <Counter>\SQLServer:Buffer Manager\Checkpoint pages/sec</Counter>
    <Counter>\SQLServer:Buffer Manager\Extension free pages</Counter>
    <Counter>\SQLServer:Buffer Manager\Extension outstanding IO counter</Counter>
    <Counter>\SQLServer:Buffer Manager\Free list stalls/sec</Counter>
    <Counter>\SQLServer:Buffer Manager\Free pages</Counter>
    <Counter>\SQLServer:Buffer Manager\Lazy writes/sec</Counter>
    <Counter>\SQLServer:Buffer Manager\Page life expectancy</Counter>
    <Counter>\SQLServer:Buffer Manager\Page lookups/sec</Counter>
    <Counter>\SQLServer:Buffer Manager\Page reads/sec</Counter>
    <Counter>\SQLServer:Buffer Manager\Page writes/sec</Counter>
    <Counter>\SQLServer:Buffer Manager\Readahead pages/sec</Counter>
    <Counter>\SQLServer:Buffer Manager\Target pages</Counter>
    <Counter>\SQLServer:Buffer Node(*)\Database pages</Counter>
    <Counter>\SQLServer:Buffer Node(*)\Foreign pages</Counter>
    <Counter>\SQLServer:Buffer Node(*)\Local node page lookups/sec</Counter>
    <Counter>\SQLServer:Buffer Node(*)\Page life expectancy</Counter>
    <Counter>\SQLServer:Buffer Node(*)\Remote node page lookups/sec</Counter>
    <Counter>\SQLServer:Database Replica(*)\Log Bytes Received/sec</Counter>
    <Counter>\SQLServer:Database Replica(*)\Mirrored Write Transactions/sec</Counter>
    <Counter>\SQLServer:Database Replica(*)\Recovery Queue</Counter>
    <Counter>\SQLServer:Database Replica(_Total)\Log remaining for undo</Counter>
    <Counter>\SQLServer:Database Replica(_Total)\Log Send Queue</Counter>
    <Counter>\SQLServer:Database Replica(_Total)\Redo blocked/sec</Counter>
    <Counter>\SQLServer:Database Replica(_Total)\Redo Bytes Remaining</Counter>
    <Counter>\SQLServer:Database Replica(_Total)\Redone Bytes/sec</Counter>
    <Counter>\SQLServer:Database Replica(_Total)\Total Log requiring undo</Counter>
    <Counter>\SQLServer:Database Replica(_Total)\Transaction Delay</Counter>
    <Counter>\SQLServer:Databases(*)\Active Transactions</Counter>
    <Counter>\SQLServer:Databases(*)\Backup/Restore Throughput/sec</Counter>
    <Counter>\SQLServer:Databases(*)\Bulk Copy Throughput/sec</Counter>
    <Counter>\SQLServer:Databases(*)\Data File(s) Size (KB)</Counter>
    <Counter>\SQLServer:Databases(*)\Log Bytes Flushed/sec</Counter>
    <Counter>\SQLServer:Databases(*)\Log File(s) Size (KB)</Counter>
    <Counter>\SQLServer:Databases(*)\Log File(s) Used Size (KB)</Counter>
    <Counter>\SQLServer:Databases(*)\Log Flush Wait Time</Counter>
    <Counter>\SQLServer:Databases(*)\Log Flush Waits/sec</Counter>
    <Counter>\SQLServer:Databases(*)\Log Flushes/sec</Counter>
    <Counter>\SQLServer:Databases(*)\Log Growths</Counter>
    <Counter>\SQLServer:Databases(*)\Log Shrinks</Counter>
    <Counter>\SQLServer:Databases(*)\Log Truncations</Counter>
    <Counter>\SQLServer:Databases(*)\Percent Log Used</Counter>
    <Counter>\SQLServer:Deprecated Features(*)\Usage</Counter>
    <Counter>\SQLServer:General Statistics\Active Temp Tables</Counter>
    <Counter>\SQLServer:General Statistics\Logins/sec</Counter>
    <Counter>\SQLServer:General Statistics\Logouts/sec</Counter>
    <Counter>\SQLServer:General Statistics\Temp Tables Creation Rate</Counter>
    <Counter>\SQLServer:General Statistics\Temp Tables For Destruction</Counter>
    <Counter>\SQLServer:General Statistics\User Connections</Counter>
    <Counter>\SQLServer:Latches\Latch Waits/sec</Counter>
    <Counter>\SQLServer:Latches\Total Latch Wait Time (ms)</Counter>
    <Counter>\SQLServer:Locks(*)\Average Wait Time (ms)</Counter>
    <Counter>\SQLServer:Locks(*)\Lock Requests/sec</Counter>
    <Counter>\SQLServer:Locks(*)\Lock Timeouts/sec</Counter>
    <Counter>\SQLServer:Locks(*)\Lock Wait Time (ms)</Counter>
    <Counter>\SQLServer:Locks(*)\Lock Waits/sec</Counter>
    <Counter>\SQLServer:Locks(*)\Number of Deadlocks/sec</Counter>
    <Counter>\SQLServer:Memory Manager\Granted Workspace Memory (KB)</Counter>
    <Counter>\SQLServer:Memory Manager\Maximum Workspace Memory (KB)</Counter>
    <Counter>\SQLServer:Memory Manager\Memory Grants Outstanding</Counter>
    <Counter>\SQLServer:Memory Manager\Memory Grants Pending</Counter>
    <Counter>\SQLServer:Memory Manager\Optimizer Memory (KB)</Counter>
    <Counter>\SQLServer:Memory Manager\Stolen Server Memory (KB)</Counter>
    <Counter>\SQLServer:Memory Manager\Target Server Memory (KB)</Counter>
    <Counter>\SQLServer:Memory Manager\Target Server Memory(KB)</Counter>
    <Counter>\SQLServer:Memory Manager\Total Server Memory (KB)</Counter>
    <Counter>\SQLServer:Memory Node(*)\Database Node Memory (KB)</Counter>
    <Counter>\SQLServer:Memory Node(*)\Foreign Node Memory (KB)</Counter>
    <Counter>\SQLServer:Memory Node(*)\Stolen Node Memory (KB)</Counter>
    <Counter>\SQLServer:Memory Node(*)\Target Node Memory (KB)</Counter>
    <Counter>\SQLServer:Memory Node(000)\Total Node Memory (KB)</Counter>
    <Counter>\SQLServer:Plan Cache(*)\Cache Hit Ratio</Counter>
    <Counter>\SQLServer:Resource Pool Stats(*)\CPU usage %</Counter>
    <Counter>\SQLServer:Resource Pool Stats(*)\Max memory (KB)</Counter>
    <Counter>\SQLServer:Resource Pool Stats(*)\Target memory (KB)</Counter>
    <Counter>\SQLServer:Resource Pool Stats(*)\Used memory (KB)</Counter>
    <Counter>\SQLServer:SQL Errors(*)\Errors/sec</Counter>
    <Counter>\SQLServer:SQL Statistics\Auto-Param Attempts/sec</Counter>
    <Counter>\SQLServer:SQL Statistics\Batch Requests/sec</Counter>
    <Counter>\SQLServer:SQL Statistics\Failed Auto-Params/sec</Counter>
    <Counter>\SQLServer:SQL Statistics\Safe Auto-Params/sec</Counter>
    <Counter>\SQLServer:SQL Statistics\SQL Attention rate</Counter>
    <Counter>\SQLServer:SQL Statistics\SQL Compilations/sec</Counter>
    <Counter>\SQLServer:SQL Statistics\SQL Re-Compilations/sec</Counter>
    <Counter>\SQLServer:SQL Statistics\Unsafe Auto-Params/sec</Counter>
    <Counter>\SQLServer:Transactions\Free Space in tempdb (KB)</Counter>
    <Counter>\SQLServer:Transactions\Longest Transaction Running Time</Counter>
    <Counter>\SQLServer:Transactions\NonSnapshot Version Transactions</Counter>
    <Counter>\SQLServer:Transactions\Snapshot Transactions</Counter>
    <Counter>\SQLServer:Transactions\Transactions</Counter>
    <Counter>\SQLServer:Transactions\Version Cleanup rate (KB/s)</Counter>
    <Counter>\SQLServer:Transactions\Version Generation rate (KB/s)</Counter>
    <Counter>\SQLServer:Transactions\Version Store Size (KB)</Counter>
    <Counter>\SQLServer:User Settable(*)\Query</Counter>
    <Counter>\SQLServer:Workload Group Stats(*)\Active parallel threads</Counter>
    <Counter>\SQLServer:Workload Group Stats(*)\Active requests</Counter>
    <Counter>\SQLServer:Workload Group Stats(*)\CPU usage %</Counter>
    <Counter>\SQLServer:Workload Group Stats(*)\Queued requests</Counter>
    <Counter>\SQLServer:Workload Group Stats(*)\Reduced memory grants/sec</Counter>
    <Counter>\SQLServer:Workload Group Stats(*)\Requests completed/sec</Counter>
    <Counter>\SQLServer:Workload Group Stats(*)\Suboptimal plans/sec</Counter>
    <Counter>\System\Context Switches/sec</Counter>
    <Counter>\System\Processor Queue Length</Counter>
    <Counter>\System\System Calls/sec</Counter>
    <Counter>\TCPv4\Connection Failures</Counter>
</PerformanceCounterDataCollector>
</DataCollectorSet>

tools\dbatools\bin\projects\dbatools\.vs\dbatools\v15\.suo

tools\dbatools\bin\diagnosticquery\SQLServerDiagnosticQueries_AzureSQLDatabase_201810.sql


-- Azure SQL Database Diagnostic Information Queries
-- Glenn Berry 
-- Last Modified: October 16, 2018
-- https://www.sqlskills.com/blogs/glenn/
-- http://sqlserverperformance.wordpress.com/
-- Twitter: GlennAlanBerry

-- Please listen to my Pluralsight courses
-- https://www.pluralsight.com/author/glenn-berry

-- If you want to find all of our SQLskills SQL101 blog posts, check out https://www.sqlskills.com/help/sql101/



--******************************************************************************
--*   Copyright (C) 2018 Glenn Berry, SQLskills.com
--*   All rights reserved. 
--*
--*   For more scripts and sample code, check out 
--*      https://www.sqlskills.com/blogs/glenn
--*
--*   You may alter this code for your own *non-commercial* purposes. You may
--*   republish altered code as long as you include this copyright and give due credit. 
--*
--*
--*   THIS CODE AND INFORMATION ARE PROVIDED "AS IS" WITHOUT WARRANTY OF 
--*   ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED 
--*   TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A
--*   PARTICULAR PURPOSE. 
--*
--******************************************************************************

-- Make sure you are connected a user database, rather than the master system database


-- Server level queries *******************************

-- SQL and OS Version information for current instance  (Query 1) (Version Info)
SELECT @@SERVERNAME AS [Server Name], @@VERSION AS [SQL Server and OS Version Info];
------

-- Azure SQL Database does not expose as much information as on-premise SQL Server does
													


-- Get instance-level configuration values for instance  (Query 2) (Configuration Values)
SELECT name, value, value_in_use, minimum, maximum, [description], is_dynamic, is_advanced
FROM sys.configurations WITH (NOLOCK)
ORDER BY name OPTION (RECOMPILE);
------

-- All of these settings are read-only in Azure SQL Database, so they are informational only



-- SQL Server NUMA Node information  (Query 3) (SQL Server NUMA Info)
SELECT node_id, node_state_desc, memory_node_id, processor_group, cpu_count, online_scheduler_count, 
       idle_scheduler_count, active_worker_count, avg_load_balance, resource_monitor_state
FROM sys.dm_os_nodes WITH (NOLOCK) 
WHERE node_state_desc <> N'ONLINE DAC' OPTION (RECOMPILE);
------

-- Gives you some useful information about the composition and relative load on your NUMA nodes
-- You want to see an equal number of schedulers on each NUMA node



-- Calculates average stalls per read, per write, and per total input/output for each database file  (Query 4) (IO Stalls by File)
SELECT DB_NAME(fs.database_id) AS [Database Name], CAST(fs.io_stall_read_ms/(1.0 + fs.num_of_reads) AS NUMERIC(10,1)) AS [avg_read_stall_ms],
CAST(fs.io_stall_write_ms/(1.0 + fs.num_of_writes) AS NUMERIC(10,1)) AS [avg_write_stall_ms],
CAST((fs.io_stall_read_ms + fs.io_stall_write_ms)/(1.0 + fs.num_of_reads + fs.num_of_writes) AS NUMERIC(10,1)) AS [avg_io_stall_ms],
fs.io_stall_read_ms, fs.num_of_reads, 
fs.io_stall_write_ms, fs.num_of_writes, fs.io_stall_read_ms + fs.io_stall_write_ms AS [io_stalls], fs.num_of_reads + fs.num_of_writes AS [total_io],
io_stall_queued_read_ms AS [Resource Governor Total Read IO Latency (ms)], io_stall_queued_write_ms AS [Resource Governor Total Write IO Latency (ms)]
FROM sys.dm_io_virtual_file_stats(null,null) AS fs
ORDER BY avg_io_stall_ms DESC OPTION (RECOMPILE);
------

-- Helps determine which database files on the entire instance have the most I/O bottlenecks
-- This can help you decide whether certain LUNs are overloaded and whether you might
-- want to move some files to a different location or perhaps improve your I/O performance
-- These latency numbers include all file activity against each SQL Server 
-- database file since SQL Server was last started



-- Get I/O utilization by database (Query 5) (IO Usage By Database)
WITH Aggregate_IO_Statistics
AS
(SELECT DB_NAME(database_id) AS [Database Name],
CAST(SUM(num_of_bytes_read + num_of_bytes_written)/1048576 AS DECIMAL(12, 2)) AS io_in_mb
FROM sys.dm_io_virtual_file_stats(NULL, NULL) AS [DM_IO_STATS]
WHERE database_id NOT IN (4, 5, 32767)
GROUP BY database_id)
SELECT ROW_NUMBER() OVER(ORDER BY io_in_mb DESC) AS [I/O Rank], [Database Name], 
      CAST(io_in_mb/ SUM(io_in_mb) OVER() * 100.0 AS DECIMAL(5,2)) AS [I/O Percent],
      io_in_mb AS [Total I/O (MB)]     
FROM Aggregate_IO_Statistics
ORDER BY [I/O Rank] OPTION (RECOMPILE);
------

-- Helps determine which database is using the most I/O resources on the instance


-- Get total buffer usage by database for current instance  (Query 6) (Total Buffer Usage by Database)
-- This make take some time to run on a busy instance
WITH AggregateBufferPoolUsage
AS
(SELECT DB_NAME(database_id) AS [Database Name], COUNT(page_id) AS [Page Count],
CAST(COUNT(*) * 8/1024.0 AS DECIMAL (10,2))  AS [CachedSize],
AVG(read_microsec) AS [Avg Read Time (microseconds)]
FROM sys.dm_os_buffer_descriptors WITH (NOLOCK)
WHERE database_id NOT IN (4, 5, 32767)
GROUP BY DB_NAME(database_id))
SELECT ROW_NUMBER() OVER(ORDER BY CachedSize DESC) AS [Buffer Pool Rank], [Database Name], 
       CAST(CachedSize / SUM(CachedSize) OVER() * 100.0 AS DECIMAL(5,2)) AS [Buffer Pool Percent],
       [Page Count], CachedSize AS [Cached Size (MB)], [Avg Read Time (microseconds)]
FROM AggregateBufferPoolUsage
ORDER BY [Buffer Pool Rank] OPTION (RECOMPILE);
------

-- Tells you how much memory (in the buffer pool) 
-- is being used by each database on the instance



-- Get a count of SQL connections by IP address (Query 7) (Connection Counts by IP Address)    
SELECT ec.client_net_address, es.[program_name], es.[host_name], es.login_name, 
COUNT(ec.session_id) AS [connection count] 
FROM sys.dm_exec_sessions AS es WITH (NOLOCK) 
INNER JOIN sys.dm_exec_connections AS ec WITH (NOLOCK) 
ON es.session_id = ec.session_id 
GROUP BY ec.client_net_address, es.[program_name], es.[host_name], es.login_name  
ORDER BY ec.client_net_address, es.[program_name] OPTION (RECOMPILE);
------

-- This helps you figure where your database load is coming from
-- and verifies connectivity from other machines

-- Solving Connectivity errors to SQL Server
-- https://bit.ly/2EgzoD0



-- Get Average Task Counts (run multiple times)  (Query 8) (Avg Task Counts)
SELECT AVG(current_tasks_count) AS [Avg Task Count], 
AVG(work_queue_count) AS [Avg Work Queue Count],
AVG(runnable_tasks_count) AS [Avg Runnable Task Count],
AVG(pending_disk_io_count) AS [Avg Pending DiskIO Count]
FROM sys.dm_os_schedulers WITH (NOLOCK)
WHERE scheduler_id < 255 OPTION (RECOMPILE);
------

-- Sustained values above 10 suggest further investigation in that area (depending on your Service Tier)
-- Avg Task Counts will be higher with lower service tiers
-- High Avg Task Counts are often caused by blocking/deadlocking or other resource contention

-- Sustained values above 1 suggest further investigation in that area
-- High Avg Runnable Task Counts are a good sign of CPU pressure
-- High Avg Pending DiskIO Counts are a sign of disk pressure



-- Detect blocking (run multiple times)  (Query 9) (Detect Blocking)						
SELECT t1.resource_type AS [lock type], DB_NAME(resource_database_id) AS [database],
t1.resource_associated_entity_id AS [blk object],t1.request_mode AS [lock req],  -- lock requested
t1.request_session_id AS [waiter sid], t2.wait_duration_ms AS [wait time],       -- spid of waiter  
(SELECT [text] FROM sys.dm_exec_requests AS r WITH (NOLOCK)                      -- get sql for waiter
CROSS APPLY sys.dm_exec_sql_text(r.[sql_handle]) 
WHERE r.session_id = t1.request_session_id) AS [waiter_batch],
(SELECT SUBSTRING(qt.[text],r.statement_start_offset/2, 
    (CASE WHEN r.statement_end_offset = -1 
    THEN LEN(CONVERT(nvarchar(max), qt.[text])) * 2 
    ELSE r.statement_end_offset END - r.statement_start_offset)/2) 
FROM sys.dm_exec_requests AS r WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(r.[sql_handle]) AS qt
WHERE r.session_id = t1.request_session_id) AS [waiter_stmt],					-- statement blocked
t2.blocking_session_id AS [blocker sid],										-- spid of blocker
(SELECT [text] FROM sys.sysprocesses AS p										-- get sql for blocker
CROSS APPLY sys.dm_exec_sql_text(p.[sql_handle]) 
WHERE p.spid = t2.blocking_session_id) AS [blocker_batch]
FROM sys.dm_tran_locks AS t1 WITH (NOLOCK)
INNER JOIN sys.dm_os_waiting_tasks AS t2 WITH (NOLOCK)
ON t1.lock_owner_address = t2.resource_address OPTION (RECOMPILE);
------

-- Helps troubleshoot blocking and deadlocking issues
-- The results will change from second to second on a busy system
-- You should run this query multiple times when you see signs of blocking



-- Page Life Expectancy (PLE) value for each NUMA node in current instance  (Query 10) (PLE by NUMA Node)
SELECT @@SERVERNAME AS [Server Name], RTRIM([object_name]) AS [Object Name], instance_name, cntr_value AS [Page Life Expectancy]
FROM sys.dm_os_performance_counters WITH (NOLOCK)
WHERE [object_name] LIKE N'%Buffer Node%' -- Handles named instances
AND counter_name = N'Page life expectancy' OPTION (RECOMPILE);
------

-- PLE is a good measurement of internal memory pressure
-- Higher PLE is better. Watch the trend over time, not the absolute value
-- This will only return one row for non-NUMA systems

-- Page Life Expectancy isn�t what you think�
-- https://bit.ly/2EgynLa


-- Memory Grants Pending value for current instance  (Query 11) (Memory Grants Pending)
SELECT @@SERVERNAME AS [Server Name], RTRIM([object_name]) AS [Object Name], cntr_value AS [Memory Grants Pending]                                                                                                       
FROM sys.dm_os_performance_counters WITH (NOLOCK)
WHERE [object_name] LIKE N'%Memory Manager%' -- Handles named instances
AND counter_name = N'Memory Grants Pending' OPTION (RECOMPILE);
------

-- Run multiple times, and run periodically if you suspect you are under memory pressure
-- Memory Grants Pending above zero for a sustained period is a very strong indicator of internal memory pressure


-- Memory Clerk Usage for instance  (Query 12) (Memory Clerk Usage)
-- Look for high value for CACHESTORE_SQLCP (Ad-hoc query plans)
SELECT TOP(10) mc.[type] AS [Memory Clerk Type], 
       CAST((SUM(mc.pages_kb)/1024.0) AS DECIMAL (15,2)) AS [Memory Usage (MB)] 
FROM sys.dm_os_memory_clerks AS mc WITH (NOLOCK)
GROUP BY mc.[type]  
ORDER BY SUM(mc.pages_kb) DESC OPTION (RECOMPILE);
------

-- MEMORYCLERK_SQLBUFFERPOOL was new for SQL Server 2012. It should be your highest consumer of memory

-- CACHESTORE_SQLCP  SQL Plans         
-- These are cached SQL statements or batches that aren't in stored procedures, functions and triggers
-- Watch out for high values for CACHESTORE_SQLCP
-- Enabling 'optimize for ad hoc workloads' at the instance level can help reduce this


-- CACHESTORE_OBJCP  Object Plans      
-- These are compiled plans for stored procedures, functions and triggers



-- Find single-use, ad-hoc and prepared queries that are bloating the plan cache  (Query 13) (Ad hoc Queries)   
SELECT TOP(50) DB_NAME(t.[dbid]) AS [Database Name], t.[text] AS [Query Text], 
cp.objtype AS [Object Type], cp.cacheobjtype AS [Cache Object Type],  
cp.size_in_bytes/1024 AS [Plan Size in KB]
FROM sys.dm_exec_cached_plans AS cp WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(plan_handle) AS t
WHERE cp.cacheobjtype = N'Compiled Plan' 
AND cp.objtype IN (N'Adhoc', N'Prepared') 
AND cp.usecounts = 1
ORDER BY cp.size_in_bytes DESC, DB_NAME(t.[dbid]) OPTION (RECOMPILE);
------

-- Gives you the text, type and size of single-use ad-hoc and prepared queries that waste space in the plan cache
-- Enabling forced parameterization for the database can help, but test first!

-- Plan cache, adhoc workloads and clearing the single-use plan cache bloat
-- https://bit.ly/2EfYOkl






-- Database specific queries *****************************************************************


-- Azure SQL Database size  (Query 14) (Azure SQL DB Size)
SELECT CAST(SUM(CAST(FILEPROPERTY(name, 'SpaceUsed') AS bigint) * 8192.) / 1024 / 1024 AS DECIMAL(15,2)) AS [Database Size In MB],
       CAST(SUM(CAST(FILEPROPERTY(name, 'SpaceUsed') AS bigint) * 8192.) / 1024 / 1024 / 1024 AS DECIMAL(15,2)) AS [Database Size In GB]
FROM sys.database_files WITH (NOLOCK)
WHERE [type_desc] = N'ROWS' OPTION (RECOMPILE);
------

-- This gives you the actual space usage within the data file only, to match what the Azure portal shows for the database size

-- Determining Database Size in Azure SQL Database V12
-- https://bit.ly/2JjrqNh



-- Individual File Sizes and space available for current database  (Query 15) (File Sizes and Space)
SELECT f.name AS [File Name] , f.physical_name AS [Physical Name], 
CAST((f.size/128.0) AS DECIMAL(15,2)) AS [Total Size in MB],
CAST(f.size/128.0 - CAST(FILEPROPERTY(f.name, 'SpaceUsed') AS int)/128.0 AS DECIMAL(15,2)) 
AS [Available Space In MB], f.[file_id], fg.name AS [Filegroup Name],
f.is_percent_growth, f.growth, fg.is_default, fg.is_read_only, 
fg.is_autogrow_all_files
FROM sys.database_files AS f WITH (NOLOCK) 
LEFT OUTER JOIN sys.filegroups AS fg WITH (NOLOCK)
ON f.data_space_id = fg.data_space_id
ORDER BY f.[file_id] OPTION (RECOMPILE);
------

-- Look at how large and how full the files are and where they are located

-- is_autogrow_all_files was new for SQL Server 2016. Equivalent to TF 1117 for user databases

-- SQL Server 2016: Changes in default behavior for autogrow and allocations for tempdb and user databases
-- http://bit.ly/2evRZSR



-- Log space usage for current database  (Query 16) (Log Space Usage)
SELECT DB_NAME(lsu.database_id) AS [Database Name], db.recovery_model_desc AS [Recovery Model],
		CAST(lsu.total_log_size_in_bytes/1048576.0 AS DECIMAL(10, 2)) AS [Total Log Space (MB)],
		CAST(lsu.used_log_space_in_bytes/1048576.0 AS DECIMAL(10, 2)) AS [Used Log Space (MB)], 
		CAST(lsu.used_log_space_in_percent AS DECIMAL(10, 2)) AS [Used Log Space %],
		CAST(lsu.log_space_in_bytes_since_last_backup/1048576.0 AS DECIMAL(10, 2)) AS [Used Log Space Since Last Backup (MB)],
		db.log_reuse_wait_desc		 
FROM sys.dm_db_log_space_usage AS lsu WITH (NOLOCK)
INNER JOIN sys.databases AS db WITH (NOLOCK)
ON lsu.database_id = db.database_id
OPTION (RECOMPILE);
------

-- Look at log file size and usage, along with the log reuse wait description for the current database


-- Get VLF Counts for current database (Query 17) (VLF Counts)
SELECT [name] AS [Database Name], [VLF Count]
FROM sys.databases AS db WITH (NOLOCK)
CROSS APPLY (SELECT file_id, COUNT(*) AS [VLF Count]
		     FROM sys.dm_db_log_info(db.database_id)
			 GROUP BY file_id) AS li
WHERE [name] <> N'master'
ORDER BY [VLF Count] DESC OPTION (RECOMPILE);
------

-- High VLF counts can affect write performance to the log file
-- and they can make full database restores and crash recovery take much longer
-- Try to keep your VLF counts under 200 in most cases (depending on log file size)

-- Important change to VLF creation algorithm in SQL Server 2014
-- https://bit.ly/2Hsjbg4



-- Status of last VLF for current database  (Query 18) (Last VLF Status)
SELECT TOP(1) DB_NAME(li.database_id) AS [Database Name], li.[file_id],
               li.vlf_size_mb, li.vlf_sequence_number, li.vlf_active, li.vlf_status
FROM sys.dm_db_log_info(DB_ID()) AS li 
ORDER BY vlf_sequence_number DESC OPTION (RECOMPILE);
------

-- Determine whether you will be able to shrink the transaction log file

-- vlf_status Values
-- 0 is inactive 
-- 1 is initialized but unused 
-- 2 is active


-- Important database properties for current database   (Query 19) (Database Properties)
SELECT db.[name] AS [Database Name], db.recovery_model_desc AS [Recovery Model], 
db.state_desc, db.containment_desc, db.log_reuse_wait_desc AS [Log Reuse Wait Description], 
db.[compatibility_level] AS [DB Compatibility Level], 
db.is_mixed_page_allocation_on, db.page_verify_option_desc AS [Page Verify Option], 
db.is_auto_create_stats_on, db.is_auto_update_stats_on, db.is_auto_update_stats_async_on, db.is_parameterization_forced, 
db.snapshot_isolation_state_desc, db.is_read_committed_snapshot_on, db.is_auto_close_on, db.is_auto_shrink_on, 
db.target_recovery_time_in_seconds, db.is_cdc_enabled, db.is_memory_optimized_elevate_to_snapshot_on, 
db.delayed_durability_desc, db.is_auto_create_stats_incremental_on,
db.is_query_store_on, db.is_sync_with_backup, db.is_temporal_history_retention_enabled,
db.is_encrypted  
FROM sys.databases AS db WITH (NOLOCK)
WHERE db.[name] <> N'master'
ORDER BY db.[name] OPTION (RECOMPILE);
------

-- Things to look at:
-- What recovery models are you using?
-- What is the log reuse wait description?
-- What compatibility level are the databases on? 
-- What is the Page Verify Option? (should be CHECKSUM)
-- Is Auto Update Statistics Asynchronously enabled?
-- Is Delayed Durability enabled?
-- Make sure auto_shrink and auto_close are not enabled!



-- Get database scoped configuration values for current database (Query 20) (Database-scoped Configurations)
SELECT configuration_id, [name], [value] AS [value_for_primary]
FROM sys.database_scoped_configurations WITH (NOLOCK) OPTION (RECOMPILE);
------

-- This lets you see the value of these new properties for the current database

-- Clear plan cache for current database
-- ALTER DATABASE SCOPED CONFIGURATION CLEAR PROCEDURE_CACHE;

-- ALTER DATABASE SCOPED CONFIGURATION (Transact-SQL)
-- https://bit.ly/2sOH7nb


-- I/O Statistics by file for the current database  (Query 21) (IO Stats By File)
SELECT DB_NAME(DB_ID()) AS [Database Name], df.name AS [Logical Name], vfs.[file_id], df.type_desc,
df.physical_name AS [Physical Name], CAST(vfs.size_on_disk_bytes/1048576.0 AS DECIMAL(10, 2)) AS [Size on Disk (MB)],
vfs.num_of_reads, vfs.num_of_writes, vfs.io_stall_read_ms, vfs.io_stall_write_ms,
CAST(100. * vfs.io_stall_read_ms/(vfs.io_stall_read_ms + vfs.io_stall_write_ms) AS DECIMAL(10,1)) AS [IO Stall Reads Pct],
CAST(100. * vfs.io_stall_write_ms/(vfs.io_stall_write_ms + vfs.io_stall_read_ms) AS DECIMAL(10,1)) AS [IO Stall Writes Pct],
(vfs.num_of_reads + vfs.num_of_writes) AS [Writes + Reads], 
CAST(vfs.num_of_bytes_read/1048576.0 AS DECIMAL(10, 2)) AS [MB Read], 
CAST(vfs.num_of_bytes_written/1048576.0 AS DECIMAL(10, 2)) AS [MB Written],
CAST(100. * vfs.num_of_reads/(vfs.num_of_reads + vfs.num_of_writes) AS DECIMAL(10,1)) AS [# Reads Pct],
CAST(100. * vfs.num_of_writes/(vfs.num_of_reads + vfs.num_of_writes) AS DECIMAL(10,1)) AS [# Write Pct],
CAST(100. * vfs.num_of_bytes_read/(vfs.num_of_bytes_read + vfs.num_of_bytes_written) AS DECIMAL(10,1)) AS [Read Bytes Pct],
CAST(100. * vfs.num_of_bytes_written/(vfs.num_of_bytes_read + vfs.num_of_bytes_written) AS DECIMAL(10,1)) AS [Written Bytes Pct]
FROM sys.dm_io_virtual_file_stats(DB_ID(), NULL) AS vfs
INNER JOIN sys.database_files AS df WITH (NOLOCK)
ON vfs.[file_id]= df.[file_id] OPTION (RECOMPILE);
------

-- This helps you characterize your workload better from an I/O perspective for this database
-- It helps you determine whether you has an OLTP or DW/DSS type of workload


-- Get recent resource usage (Query 22) (Recent Resource Usage)
SELECT dtu_limit, cpu_limit, avg_cpu_percent, avg_data_io_percent, avg_log_write_percent, avg_memory_usage_percent, xtp_storage_percent,
       max_worker_percent, max_session_percent,  avg_login_rate_percent, end_time 
FROM sys.dm_db_resource_stats WITH (NOLOCK) 
ORDER BY end_time DESC OPTION (RECOMPILE);
------

-- Returns a row of usage metrics every 15 seconds, going back 64 minutes
-- The end_time column is UTC time

-- sys.dm_db_resource_stats (Azure SQL Database)
-- https://bit.ly/2HaSpKn



-- Get recent resource usage (Query 23) (Avg/Max Resource Usage)
SELECT AVG(avg_cpu_percent) AS [Average CPU Utilization In Percent],   
       MAX(avg_cpu_percent) AS [Maximum CPU Utilization In Percent],   
       AVG(avg_data_io_percent) AS [Average Data IO In Percent],   
       MAX(avg_data_io_percent) AS [Maximum Data IO In Percent],   
       AVG(avg_log_write_percent) AS [Average Log Write Utilization In Percent],   
       MAX(avg_log_write_percent) AS [Maximum Log Write Utilization In Percent],   
       AVG(avg_memory_usage_percent) AS [Average Memory Usage In Percent],   
       MAX(avg_memory_usage_percent) AS [Maximum Memory Usage In Percent]   
FROM sys.dm_db_resource_stats WITH (NOLOCK) OPTION (RECOMPILE); 
------


-- Isolate top waits for this database since last restart or failover (Query 24) (Top DB Waits)
WITH [Waits] 
AS (SELECT wait_type, wait_time_ms/ 1000.0 AS [WaitS],
          (wait_time_ms - signal_wait_time_ms) / 1000.0 AS [ResourceS],
           signal_wait_time_ms / 1000.0 AS [SignalS],
           waiting_tasks_count AS [WaitCount],
           100.0 *  wait_time_ms / SUM (wait_time_ms) OVER() AS [Percentage],
           ROW_NUMBER() OVER(ORDER BY wait_time_ms DESC) AS [RowNum]
    FROM sys.dm_db_wait_stats WITH (NOLOCK)
    WHERE [wait_type] NOT IN (
        N'BROKER_EVENTHANDLER', N'BROKER_RECEIVE_WAITFOR', N'BROKER_TASK_STOP',
		N'BROKER_TO_FLUSH', N'BROKER_TRANSMITTER', N'CHECKPOINT_QUEUE',
        N'CHKPT', N'CLR_AUTO_EVENT', N'CLR_MANUAL_EVENT', N'CLR_SEMAPHORE',
        N'DBMIRROR_DBM_EVENT', N'DBMIRROR_EVENTS_QUEUE', N'DBMIRROR_WORKER_QUEUE',
		N'DBMIRRORING_CMD', N'DIRTY_PAGE_POLL', N'DISPATCHER_QUEUE_SEMAPHORE',
        N'EXECSYNC', N'FSAGENT', N'FT_IFTS_SCHEDULER_IDLE_WAIT', N'FT_IFTSHC_MUTEX',
        N'HADR_CLUSAPI_CALL', N'HADR_FILESTREAM_IOMGR_IOCOMPLETION', N'HADR_LOGCAPTURE_WAIT', 
		N'HADR_NOTIFICATION_DEQUEUE', N'HADR_TIMER_TASK', N'HADR_WORK_QUEUE',
        N'KSOURCE_WAKEUP', N'LAZYWRITER_SLEEP', N'LOGMGR_QUEUE', 
		N'MEMORY_ALLOCATION_EXT', N'ONDEMAND_TASK_QUEUE',
		N'PREEMPTIVE_HADR_LEASE_MECHANISM', N'PREEMPTIVE_SP_SERVER_DIAGNOSTICS',
		N'PREEMPTIVE_ODBCOPS',
		N'PREEMPTIVE_OS_LIBRARYOPS', N'PREEMPTIVE_OS_COMOPS', N'PREEMPTIVE_OS_CRYPTOPS',
		N'PREEMPTIVE_OS_PIPEOPS', N'PREEMPTIVE_OS_AUTHENTICATIONOPS',
		N'PREEMPTIVE_OS_GENERICOPS', N'PREEMPTIVE_OS_VERIFYTRUST',
		N'PREEMPTIVE_OS_FILEOPS', N'PREEMPTIVE_OS_DEVICEOPS', N'PREEMPTIVE_OS_QUERYREGISTRY',
		N'PREEMPTIVE_OS_WRITEFILE',
		N'PREEMPTIVE_XE_CALLBACKEXECUTE', N'PREEMPTIVE_XE_DISPATCHER',
		N'PREEMPTIVE_XE_GETTARGETSTATE', N'PREEMPTIVE_XE_SESSIONCOMMIT',
		N'PREEMPTIVE_XE_TARGETINIT', N'PREEMPTIVE_XE_TARGETFINALIZE',
		N'PREEMPTIVE_XHTTP',
        N'PWAIT_ALL_COMPONENTS_INITIALIZED', N'PWAIT_DIRECTLOGCONSUMER_GETNEXT',
		N'QDS_PERSIST_TASK_MAIN_LOOP_SLEEP',
		N'QDS_ASYNC_QUEUE',
        N'QDS_CLEANUP_STALE_QUERIES_TASK_MAIN_LOOP_SLEEP', N'REQUEST_FOR_DEADLOCK_SEARCH',
		N'RESOURCE_GOVERNOR_IDLE',
		N'RESOURCE_QUEUE', N'SERVER_IDLE_CHECK', N'SLEEP_BPOOL_FLUSH', N'SLEEP_DBSTARTUP',
		N'SLEEP_DCOMSTARTUP', N'SLEEP_MASTERDBREADY', N'SLEEP_MASTERMDREADY',
        N'SLEEP_MASTERUPGRADED', N'SLEEP_MSDBSTARTUP', N'SLEEP_SYSTEMTASK', N'SLEEP_TASK',
        N'SLEEP_TEMPDBSTARTUP', N'SNI_HTTP_ACCEPT', N'SP_SERVER_DIAGNOSTICS_SLEEP',
		N'SQLTRACE_BUFFER_FLUSH', N'SQLTRACE_INCREMENTAL_FLUSH_SLEEP', N'SQLTRACE_WAIT_ENTRIES',
		N'WAIT_FOR_RESULTS', N'WAITFOR', N'WAITFOR_TASKSHUTDOWN', N'WAIT_XTP_HOST_WAIT',
		N'WAIT_XTP_OFFLINE_CKPT_NEW_LOG', N'WAIT_XTP_CKPT_CLOSE', N'WAIT_XTP_RECOVERY',
		N'XE_BUFFERMGR_ALLPROCESSED_EVENT', N'XE_DISPATCHER_JOIN',
        N'XE_DISPATCHER_WAIT', N'XE_LIVE_TARGET_TVF', N'XE_TIMER_EVENT')
    AND waiting_tasks_count > 0)
SELECT
    MAX (W1.wait_type) AS [WaitType],
	CAST (MAX (W1.Percentage) AS DECIMAL (5,2)) AS [Wait Percentage],
	CAST ((MAX (W1.WaitS) / MAX (W1.WaitCount)) AS DECIMAL (16,4)) AS [AvgWait_Sec],
    CAST ((MAX (W1.ResourceS) / MAX (W1.WaitCount)) AS DECIMAL (16,4)) AS [AvgRes_Sec],
    CAST ((MAX (W1.SignalS) / MAX (W1.WaitCount)) AS DECIMAL (16,4)) AS [AvgSig_Sec],
    CAST (MAX (W1.WaitS) AS DECIMAL (16,2)) AS [Total_Wait_Sec],
    CAST (MAX (W1.ResourceS) AS DECIMAL (16,2)) AS [Resource_Sec],
    CAST (MAX (W1.SignalS) AS DECIMAL (16,2)) AS [Signal_Sec],
    MAX (W1.WaitCount) AS [Wait Count]   
FROM Waits AS W1
INNER JOIN Waits AS W2
ON W2.RowNum <= W1.RowNum
GROUP BY W1.RowNum
HAVING SUM (W2.Percentage) - MAX (W1.Percentage) < 99 -- percentage threshold
OPTION (RECOMPILE);
------

-- Cumulative wait stats are not as useful on an idle instance that is not under load or performance pressure

-- SQL Server Wait Types Library (Paul Randal)
-- https://www.sqlskills.com/help/waits/

-- The SQL Server Wait Type Repository
-- http://blogs.msdn.com/b/psssql/archive/2009/11/03/the-sql-server-wait-type-repository.aspx

-- Wait statistics, or please tell me where it hurts
-- https://www.sqlskills.com/blogs/paul/wait-statistics-or-please-tell-me-where-it-hurts/

-- SQL Server 2005 Performance Tuning using the Waits and Queues
-- http://technet.microsoft.com/en-us/library/cc966413.aspx

-- sys.dm_os_wait_stats (Transact-SQL)
-- http://msdn.microsoft.com/en-us/library/ms179984(v=sql.120).aspx



-- Get most frequently executed queries for this database (Query 25) (Query Execution Counts)
SELECT TOP(50) LEFT(t.[text], 50) AS [Short Query Text], qs.execution_count AS [Execution Count],
qs.total_logical_reads AS [Total Logical Reads],
qs.total_logical_reads/qs.execution_count AS [Avg Logical Reads],
qs.total_worker_time AS [Total Worker Time],
qs.total_worker_time/qs.execution_count AS [Avg Worker Time], 
qs.total_elapsed_time AS [Total Elapsed Time],
qs.total_elapsed_time/qs.execution_count AS [Avg Elapsed Time],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index], 
qs.creation_time AS [Creation Time]
--,t.[text] AS [Complete Query Text], qp.query_plan AS [Query Plan] -- uncomment out these columns if not copying results to Excel
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(plan_handle) AS t 
CROSS APPLY sys.dm_exec_query_plan(plan_handle) AS qp 
WHERE t.dbid = DB_ID()
ORDER BY qs.execution_count DESC OPTION (RECOMPILE);
------


-- Get top total worker time queries for this database (Query 26) (Top Worker Time Queries)		
SELECT TOP(50) DB_NAME(t.[dbid]) AS [Database Name], 
REPLACE(REPLACE(LEFT(t.[text], 50), CHAR(10),''), CHAR(13),'') AS [Short Query Text],  
qs.total_worker_time AS [Total Worker Time], qs.min_worker_time AS [Min Worker Time],
qs.total_worker_time/qs.execution_count AS [Avg Worker Time], 
qs.max_worker_time AS [Max Worker Time], 
qs.min_elapsed_time AS [Min Elapsed Time], 
qs.total_elapsed_time/qs.execution_count AS [Avg Elapsed Time], 
qs.max_elapsed_time AS [Max Elapsed Time],
qs.min_logical_reads AS [Min Logical Reads],
qs.total_logical_reads/qs.execution_count AS [Avg Logical Reads],
qs.max_logical_reads AS [Max Logical Reads], 
qs.execution_count AS [Execution Count],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index],  
qs.creation_time AS [Creation Time]
--,t.[text] AS [Query Text], qp.query_plan AS [Query Plan] -- uncomment out these columns if not copying results to Excel
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(plan_handle) AS t 
CROSS APPLY sys.dm_exec_query_plan(plan_handle) AS qp
WHERE t.dbid = DB_ID() 
ORDER BY qs.total_worker_time DESC OPTION (RECOMPILE);
------

-- Helps you find the most expensive queries from a CPU perspective for this database
-- Can also help track down parameter sniffing issues


-- Get top total logical reads queries for this database (Query 27) (Top Logical Reads Queries)    
SELECT TOP(50) DB_NAME(t.[dbid]) AS [Database Name],
REPLACE(REPLACE(LEFT(t.[text], 50), CHAR(10),''), CHAR(13),'') AS [Short Query Text], 
qs.total_logical_reads AS [Total Logical Reads],
qs.min_logical_reads AS [Min Logical Reads],
qs.total_logical_reads/qs.execution_count AS [Avg Logical Reads],
qs.max_logical_reads AS [Max Logical Reads],   
qs.min_worker_time AS [Min Worker Time],
qs.total_worker_time/qs.execution_count AS [Avg Worker Time], 
qs.max_worker_time AS [Max Worker Time], 
qs.min_elapsed_time AS [Min Elapsed Time], 
qs.total_elapsed_time/qs.execution_count AS [Avg Elapsed Time], 
qs.max_elapsed_time AS [Max Elapsed Time],
qs.execution_count AS [Execution Count],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index],   
qs.creation_time AS [Creation Time]
--,t.[text] AS [Complete Query Text], qp.query_plan AS [Query Plan] -- uncomment out these columns if not copying results to Excel
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(plan_handle) AS t 
CROSS APPLY sys.dm_exec_query_plan(plan_handle) AS qp
WHERE t.dbid = DB_ID()  
ORDER BY qs.total_logical_reads DESC OPTION (RECOMPILE);
------


-- Helps you find the most expensive queries from a memory perspective for this database
-- Can also help track down parameter sniffing issues



-- Get top average elapsed time queries for this database (Query 28) (Top Avg Elapsed Time Queries)   
SELECT TOP(50) DB_NAME(t.[dbid]) AS [Database Name], 
REPLACE(REPLACE(LEFT(t.[text], 255), CHAR(10),''), CHAR(13),'') AS [Short Query Text],  
qs.total_elapsed_time/qs.execution_count AS [Avg Elapsed Time],
qs.min_elapsed_time, qs.max_elapsed_time, qs.last_elapsed_time,
qs.execution_count AS [Execution Count],  
qs.total_logical_reads/qs.execution_count AS [Avg Logical Reads], 
qs.total_physical_reads/qs.execution_count AS [Avg Physical Reads], 
qs.total_worker_time/qs.execution_count AS [Avg Worker Time],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index],  
qs.creation_time AS [Creation Time]
, qp.query_plan AS [Query Plan] -- comment out this column if copying results to Excel
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(plan_handle) AS t 
CROSS APPLY sys.dm_exec_query_plan(plan_handle) AS qp
WHERE t.dbid = DB_ID()  
ORDER BY qs.total_elapsed_time/qs.execution_count DESC OPTION (RECOMPILE);
------

-- Helps you find the highest average elapsed time queries for this database
-- Can also help track down parameter sniffing issues



-- Top Cached SPs By Execution Count (Query 29) (SP Execution Counts)
SELECT TOP(100) p.name AS [SP Name], qs.execution_count AS [Execution Count],
ISNULL(qs.execution_count/DATEDIFF(Minute, qs.cached_time, GETDATE()), 0) AS [Calls/Minute],
qs.total_elapsed_time/qs.execution_count AS [Avg Elapsed Time],
qs.total_worker_time/qs.execution_count AS [Avg Worker Time],    
qs.total_logical_reads/qs.execution_count AS [Avg Logical Reads],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index],
FORMAT(qs.last_execution_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Last Execution Time], 
FORMAT(qs.cached_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Plan Cached Time]
-- ,qp.query_plan AS [Query Plan] -- Uncomment if you want the Query Plan
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
CROSS APPLY sys.dm_exec_query_plan(qs.plan_handle) AS qp
WHERE qs.database_id = DB_ID()
AND DATEDIFF(Minute, qs.cached_time, GETDATE()) > 0
ORDER BY qs.execution_count DESC OPTION (RECOMPILE);
------

-- Tells you which cached stored procedures are called the most often
-- This helps you characterize and baseline your workload


-- Top Cached SPs By Avg Elapsed Time (Query 30) (SP Avg Elapsed Time)
SELECT TOP(25) p.name AS [SP Name], qs.min_elapsed_time, qs.total_elapsed_time/qs.execution_count AS [avg_elapsed_time], 
qs.max_elapsed_time, qs.last_elapsed_time, qs.total_elapsed_time, qs.execution_count, 
ISNULL(qs.execution_count/DATEDIFF(Minute, qs.cached_time, GETDATE()), 0) AS [Calls/Minute], 
qs.total_worker_time/qs.execution_count AS [AvgWorkerTime], 
qs.total_worker_time AS [TotalWorkerTime],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index],
FORMAT(qs.last_execution_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Last Execution Time], 
FORMAT(qs.cached_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Plan Cached Time]
-- ,qp.query_plan AS [Query Plan] -- Uncomment if you want the Query Plan
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
CROSS APPLY sys.dm_exec_query_plan(qs.plan_handle) AS qp
WHERE qs.database_id = DB_ID()
AND DATEDIFF(Minute, qs.cached_time, GETDATE()) > 0
ORDER BY avg_elapsed_time DESC OPTION (RECOMPILE);
------

-- This helps you find high average elapsed time cached stored procedures that
-- may be easy to optimize with standard query tuning techniques



-- Top Cached SPs By Total Worker time. Worker time relates to CPU cost  (Query 31) (SP Worker Time)
SELECT TOP(25) p.name AS [SP Name], qs.total_worker_time AS [TotalWorkerTime], 
qs.total_worker_time/qs.execution_count AS [AvgWorkerTime], qs.execution_count, 
ISNULL(qs.execution_count/DATEDIFF(Minute, qs.cached_time, GETDATE()), 0) AS [Calls/Minute],
qs.total_elapsed_time, qs.total_elapsed_time/qs.execution_count AS [avg_elapsed_time],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index],
FORMAT(qs.last_execution_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Last Execution Time], 
FORMAT(qs.cached_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Plan Cached Time]
-- ,qp.query_plan AS [Query Plan] -- Uncomment if you want the Query Plan
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
CROSS APPLY sys.dm_exec_query_plan(qs.plan_handle) AS qp
WHERE qs.database_id = DB_ID()
AND DATEDIFF(Minute, qs.cached_time, GETDATE()) > 0
ORDER BY qs.total_worker_time DESC OPTION (RECOMPILE);
------

-- This helps you find the most expensive cached stored procedures from a CPU perspective
-- You should look at this if you see signs of CPU pressure


-- Top Cached SPs By Total Logical Reads. Logical reads relate to memory pressure  (Query 32) (SP Logical Reads)
SELECT TOP(25) p.name AS [SP Name], qs.total_logical_reads AS [TotalLogicalReads], 
qs.total_logical_reads/qs.execution_count AS [AvgLogicalReads],qs.execution_count, 
ISNULL(qs.execution_count/DATEDIFF(Minute, qs.cached_time, GETDATE()), 0) AS [Calls/Minute], 
qs.total_elapsed_time, qs.total_elapsed_time/qs.execution_count AS [avg_elapsed_time],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index], 
FORMAT(qs.last_execution_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Last Execution Time], 
FORMAT(qs.cached_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Plan Cached Time]
-- ,qp.query_plan AS [Query Plan] -- Uncomment if you want the Query Plan
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
CROSS APPLY sys.dm_exec_query_plan(qs.plan_handle) AS qp
WHERE qs.database_id = DB_ID()
AND DATEDIFF(Minute, qs.cached_time, GETDATE()) > 0
ORDER BY qs.total_logical_reads DESC OPTION (RECOMPILE);
------

-- This helps you find the most expensive cached stored procedures from a memory perspective
-- You should look at this if you see signs of memory pressure


-- Top Cached SPs By Total Physical Reads. Physical reads relate to disk read I/O pressure  (Query 33) (SP Physical Reads)
SELECT TOP(25) p.name AS [SP Name],qs.total_physical_reads AS [TotalPhysicalReads], 
qs.total_physical_reads/qs.execution_count AS [AvgPhysicalReads], qs.execution_count, 
qs.total_logical_reads,qs.total_elapsed_time, qs.total_elapsed_time/qs.execution_count AS [avg_elapsed_time],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index],
FORMAT(qs.last_execution_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Last Execution Time], 
FORMAT(qs.cached_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Plan Cached Time]
-- ,qp.query_plan AS [Query Plan] -- Uncomment if you want the Query Plan 
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
CROSS APPLY sys.dm_exec_query_plan(qs.plan_handle) AS qp
WHERE qs.database_id = DB_ID()
AND qs.total_physical_reads > 0
ORDER BY qs.total_physical_reads DESC, qs.total_logical_reads DESC OPTION (RECOMPILE);
------

-- This helps you find the most expensive cached stored procedures from a read I/O perspective
-- You should look at this if you see signs of I/O pressure or of memory pressure
       


-- Top Cached SPs By Total Logical Writes (Query 34) (SP Logical Writes)
-- Logical writes relate to both memory and disk I/O pressure 
SELECT TOP(25) p.name AS [SP Name], qs.total_logical_writes AS [TotalLogicalWrites], 
qs.total_logical_writes/qs.execution_count AS [AvgLogicalWrites], qs.execution_count,
ISNULL(qs.execution_count/DATEDIFF(Minute, qs.cached_time, GETDATE()), 0) AS [Calls/Minute],
qs.total_elapsed_time, qs.total_elapsed_time/qs.execution_count AS [avg_elapsed_time],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index], 
FORMAT(qs.last_execution_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Last Execution Time], 
FORMAT(qs.cached_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Plan Cached Time]
-- ,qp.query_plan AS [Query Plan] -- Uncomment if you want the Query Plan 
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
CROSS APPLY sys.dm_exec_query_plan(qs.plan_handle) AS qp
WHERE qs.database_id = DB_ID()
AND qs.total_logical_writes > 0
AND DATEDIFF(Minute, qs.cached_time, GETDATE()) > 0
ORDER BY qs.total_logical_writes DESC OPTION (RECOMPILE);
------

-- This helps you find the most expensive cached stored procedures from a write I/O perspective
-- You should look at this if you see signs of I/O pressure or of memory pressure



-- Lists the top statements by average input/output usage for the current database  (Query 35) (Top IO Statements)
SELECT TOP(50) OBJECT_NAME(qt.objectid, dbid) AS [SP Name],
(qs.total_logical_reads + qs.total_logical_writes) /qs.execution_count AS [Avg IO], qs.execution_count AS [Execution Count],
SUBSTRING(qt.[text],qs.statement_start_offset/2, 
	(CASE 
		WHEN qs.statement_end_offset = -1 
	 THEN LEN(CONVERT(nvarchar(max), qt.[text])) * 2 
		ELSE qs.statement_end_offset 
	 END - qs.statement_start_offset)/2) AS [Query Text]	
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(qs.sql_handle) AS qt
WHERE qt.[dbid] = DB_ID()
ORDER BY [Avg IO] DESC OPTION (RECOMPILE);
------

-- Helps you find the most expensive statements for I/O by SP



-- Possible Bad NC Indexes (writes > reads)  (Query 36) (Bad NC Indexes)
SELECT OBJECT_NAME(s.[object_id]) AS [Table Name], i.name AS [Index Name], i.index_id, 
i.is_disabled, i.is_hypothetical, i.has_filter, i.fill_factor,
user_updates AS [Total Writes], user_seeks + user_scans + user_lookups AS [Total Reads],
user_updates - (user_seeks + user_scans + user_lookups) AS [Difference]
FROM sys.dm_db_index_usage_stats AS s WITH (NOLOCK)
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON s.[object_id] = i.[object_id]
AND i.index_id = s.index_id
WHERE OBJECTPROPERTY(s.[object_id],'IsUserTable') = 1
AND s.database_id = DB_ID()
AND user_updates > (user_seeks + user_scans + user_lookups)
AND i.index_id > 1
ORDER BY [Difference] DESC, [Total Writes] DESC, [Total Reads] ASC OPTION (RECOMPILE);
------

-- Look for indexes with high numbers of writes and zero or very low numbers of reads
-- Consider your complete workload, and how long your instance has been running
-- Investigate further before dropping an index!


-- Missing Indexes for current database by Index Advantage  (Query 37) (Missing Indexes)
SELECT DISTINCT CONVERT(decimal(18,2), user_seeks * avg_total_user_cost * (avg_user_impact * 0.01)) AS [index_advantage], 
migs.last_user_seek, mid.[statement] AS [Database.Schema.Table],
mid.equality_columns, mid.inequality_columns, mid.included_columns,
migs.unique_compiles, migs.user_seeks, migs.avg_total_user_cost, migs.avg_user_impact,
OBJECT_NAME(mid.[object_id]) AS [Table Name], p.rows AS [Table Rows]
FROM sys.dm_db_missing_index_group_stats AS migs WITH (NOLOCK)
INNER JOIN sys.dm_db_missing_index_groups AS mig WITH (NOLOCK)
ON migs.group_handle = mig.index_group_handle
INNER JOIN sys.dm_db_missing_index_details AS mid WITH (NOLOCK)
ON mig.index_handle = mid.index_handle
INNER JOIN sys.partitions AS p WITH (NOLOCK)
ON p.[object_id] = mid.[object_id]
WHERE mid.database_id = DB_ID() 
ORDER BY index_advantage DESC OPTION (RECOMPILE);
------

-- Look at index advantage, last user seek time, number of user seeks to help determine source and importance
-- SQL Server is overly eager to add included columns, so beware
-- Do not just blindly add indexes that show up from this query!!!


-- Find missing index warnings for cached plans in the current database  (Query 38) (Missing Index Warnings)
-- Note: This query could take some time on a busy instance
SELECT TOP(25) OBJECT_NAME(objectid) AS [ObjectName], 
               cp.objtype, cp.usecounts, cp.size_in_bytes, query_plan
FROM sys.dm_exec_cached_plans AS cp WITH (NOLOCK)
CROSS APPLY sys.dm_exec_query_plan(cp.plan_handle) AS qp
WHERE CAST(query_plan AS NVARCHAR(MAX)) LIKE N'%MissingIndex%'
AND dbid = DB_ID()
ORDER BY cp.usecounts DESC OPTION (RECOMPILE);
------

-- Helps you connect missing indexes to specific stored procedures or queries
-- This can help you decide whether to add them or not


-- Breaks down buffers used by current database by object (table, index) in the buffer cache  (Query 39) (Buffer Usage)
-- Note: This query could take some time on a busy instance
SELECT OBJECT_NAME(p.[object_id]) AS [Object Name], p.index_id, 
CAST(COUNT(*)/128.0 AS DECIMAL(10, 2)) AS [Buffer size(MB)],  
COUNT(*) AS [BufferCount], p.[Rows] AS [Row Count],
p.data_compression_desc AS [Compression Type]
FROM sys.allocation_units AS a WITH (NOLOCK)
INNER JOIN sys.dm_os_buffer_descriptors AS b WITH (NOLOCK)
ON a.allocation_unit_id = b.allocation_unit_id
INNER JOIN sys.partitions AS p WITH (NOLOCK)
ON a.container_id = p.hobt_id
WHERE b.database_id = CONVERT(int, DB_ID())
AND p.[object_id] > 100
AND OBJECT_NAME(p.[object_id]) NOT LIKE N'plan_%'
AND OBJECT_NAME(p.[object_id]) NOT LIKE N'sys%'
AND OBJECT_NAME(p.[object_id]) NOT LIKE N'xml_index_nodes%'
GROUP BY p.[object_id], p.index_id, p.data_compression_desc, p.[Rows]
ORDER BY [BufferCount] DESC OPTION (RECOMPILE);
------

-- Tells you what tables and indexes are using the most memory in the buffer cache
-- It can help identify possible candidates for data compression


-- Get Table names, row counts, and compression status for clustered index or heap  (Query 40) (Table Sizes)
SELECT OBJECT_NAME(object_id) AS [ObjectName], 
SUM(Rows) AS [RowCount], data_compression_desc AS [CompressionType]
FROM sys.partitions WITH (NOLOCK)
WHERE index_id < 2 --ignore the partitions from the non-clustered index if any
AND OBJECT_NAME(object_id) NOT LIKE N'sys%'
AND OBJECT_NAME(object_id) NOT LIKE N'queue_%' 
AND OBJECT_NAME(object_id) NOT LIKE N'filestream_tombstone%' 
AND OBJECT_NAME(object_id) NOT LIKE N'fulltext%'
AND OBJECT_NAME(object_id) NOT LIKE N'ifts_comp_fragment%'
AND OBJECT_NAME(object_id) NOT LIKE N'filetable_updates%'
AND OBJECT_NAME(object_id) NOT LIKE N'xml_index_nodes%'
AND OBJECT_NAME(object_id) NOT LIKE N'sqlagent_job%'  
AND OBJECT_NAME(object_id) NOT LIKE N'plan_persist%'  
AND OBJECT_NAME(object_id) NOT LIKE N'persistent_version%'
AND OBJECT_NAME(object_id) NOT LIKE N'database_firewall%'
AND OBJECT_NAME(object_id) NOT LIKE N'wpr_bucket%'
GROUP BY object_id, data_compression_desc
ORDER BY SUM(Rows) DESC OPTION (RECOMPILE);
------

-- Gives you an idea of table sizes, and possible data compression opportunities



-- Get some key table properties (Query 41) (Table Properties)
SELECT OBJECT_NAME(t.[object_id]) AS [ObjectName], p.[rows] AS [Table Rows], p.index_id, 
       p.data_compression_desc AS [Index Data Compression],
       t.create_date, t.lock_on_bulk_load,  
       t.is_tracked_by_cdc, t.lock_escalation_desc, t.is_filetable, 
	   t.is_memory_optimized, t.durability_desc, 
	   t.temporal_type_desc
FROM sys.tables AS t WITH (NOLOCK)
INNER JOIN sys.partitions AS p WITH (NOLOCK)
ON t.[object_id] = p.[object_id]
WHERE OBJECT_NAME(t.[object_id]) NOT LIKE N'sys%'
ORDER BY OBJECT_NAME(t.[object_id]), p.index_id OPTION (RECOMPILE);
------

-- Gives you some good information about your tables
-- is_memory_optimized and durability_desc were new in SQL Server 2014
-- temporal_type_desc, is_remote_data_archive_enabled, is_external are new in SQL Server 2016

-- sys.tables (Transact-SQL)
-- https://bit.ly/2Gk7998



-- When were Statistics last updated on all indexes?  (Query 42) (Statistics Update)
SELECT SCHEMA_NAME(o.Schema_ID) + N'.' + o.[NAME] AS [Object Name], o.[type_desc] AS [Object Type],
      i.[name] AS [Index Name], STATS_DATE(i.[object_id], i.index_id) AS [Statistics Date], 
      s.auto_created, s.no_recompute, s.user_created, s.is_incremental, s.is_temporary,
	  st.row_count, st.used_page_count
FROM sys.objects AS o WITH (NOLOCK)
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON o.[object_id] = i.[object_id]
INNER JOIN sys.stats AS s WITH (NOLOCK)
ON i.[object_id] = s.[object_id] 
AND i.index_id = s.stats_id
INNER JOIN sys.dm_db_partition_stats AS st WITH (NOLOCK)
ON o.[object_id] = st.[object_id]
AND i.[index_id] = st.[index_id]
WHERE o.[type] IN ('U', 'V')
AND st.row_count > 0
ORDER BY STATS_DATE(i.[object_id], i.index_id) DESC OPTION (RECOMPILE);
------  

-- Helps discover possible problems with out-of-date statistics
-- Also gives you an idea which indexes are the most active

-- sys.stats (Transact-SQL)
-- https://bit.ly/2GyAxrn



-- Look at most frequently modified indexes and statistics (Query 43) (Volatile Indexes)
SELECT o.[name] AS [Object Name], o.[object_id], o.[type_desc], s.[name] AS [Statistics Name], 
       s.stats_id, s.no_recompute, s.auto_created, s.is_incremental, s.is_temporary,
	   sp.modification_counter, sp.[rows], sp.rows_sampled, sp.last_updated
FROM sys.objects AS o WITH (NOLOCK)
INNER JOIN sys.stats AS s WITH (NOLOCK)
ON s.object_id = o.object_id
CROSS APPLY sys.dm_db_stats_properties(s.object_id, s.stats_id) AS sp
WHERE o.[type_desc] NOT IN (N'SYSTEM_TABLE', N'INTERNAL_TABLE')
AND sp.modification_counter > 0
ORDER BY sp.modification_counter DESC, o.name OPTION (RECOMPILE);
------

-- This helps you understand your workload and make better decisions about 
-- things like data compression and adding new indexes to a table



-- Get fragmentation info for all indexes above a certain size in the current database  (Query 44) (Index Fragmentation)
-- Note: This query could take some time on a very large database
SELECT DB_NAME(ps.database_id) AS [Database Name], SCHEMA_NAME(o.[schema_id]) AS [Schema Name],
OBJECT_NAME(ps.OBJECT_ID) AS [Object Name], i.[name] AS [Index Name], ps.index_id, 
ps.index_type_desc, ps.avg_fragmentation_in_percent, 
ps.fragment_count, ps.page_count, i.fill_factor, i.has_filter, 
i.filter_definition, i.[allow_page_locks]
FROM sys.dm_db_index_physical_stats(DB_ID(),NULL, NULL, NULL , N'LIMITED') AS ps
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON ps.[object_id] = i.[object_id] 
AND ps.index_id = i.index_id
INNER JOIN sys.objects AS o WITH (NOLOCK)
ON i.[object_id] = o.[object_id]
WHERE ps.database_id = DB_ID()
AND ps.page_count > 2500
ORDER BY ps.avg_fragmentation_in_percent DESC OPTION (RECOMPILE);
------

-- Helps determine whether you have framentation in your relational indexes
-- and how effective your index maintenance strategy is


--- Index Read/Write stats (all tables in current DB) ordered by Reads  (Query 45) (Overall Index Usage - Reads)
SELECT OBJECT_NAME(i.[object_id]) AS [ObjectName], i.[name] AS [IndexName], i.index_id, 
       s.user_seeks, s.user_scans, s.user_lookups,
	   s.user_seeks + s.user_scans + s.user_lookups AS [Total Reads], 
	   s.user_updates AS [Writes],  
	   i.[type_desc] AS [Index Type], i.fill_factor AS [Fill Factor], i.has_filter, i.filter_definition, 
	   s.last_user_scan, s.last_user_lookup, s.last_user_seek
FROM sys.indexes AS i WITH (NOLOCK)
LEFT OUTER JOIN sys.dm_db_index_usage_stats AS s WITH (NOLOCK)
ON i.[object_id] = s.[object_id]
AND i.index_id = s.index_id
AND s.database_id = DB_ID()
WHERE OBJECTPROPERTY(i.[object_id],'IsUserTable') = 1
ORDER BY s.user_seeks + s.user_scans + s.user_lookups DESC OPTION (RECOMPILE); -- Order by reads
------

-- Show which indexes in the current database are most active for Reads


--- Index Read/Write stats (all tables in current DB) ordered by Writes  (Query 46) (Overall Index Usage - Writes)
SELECT OBJECT_NAME(i.[object_id]) AS [ObjectName], i.[name] AS [IndexName], i.index_id,
	   s.user_updates AS [Writes], s.user_seeks + s.user_scans + s.user_lookups AS [Total Reads], 
	   i.[type_desc] AS [Index Type], i.fill_factor AS [Fill Factor], i.has_filter, i.filter_definition,
	   s.last_system_update, s.last_user_update
FROM sys.indexes AS i WITH (NOLOCK)
LEFT OUTER JOIN sys.dm_db_index_usage_stats AS s WITH (NOLOCK)
ON i.[object_id] = s.[object_id]
AND i.index_id = s.index_id
AND s.database_id = DB_ID()
WHERE OBJECTPROPERTY(i.[object_id],'IsUserTable') = 1
ORDER BY s.user_updates DESC OPTION (RECOMPILE);						 -- Order by writes
------

-- Show which indexes in the current database are most active for Writes


-- Get in-memory OLTP index usage (Query 47) (XTP Index Usage)
SELECT OBJECT_NAME(i.[object_id]) AS [Object Name], i.index_id, i.[name] AS [Index Name],
       i.[type_desc], xis.scans_started, xis.scans_retries, 
	   xis.rows_touched, xis.rows_returned
FROM sys.dm_db_xtp_index_stats AS xis WITH (NOLOCK)
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON i.[object_id] = xis.[object_id] 
AND i.index_id = xis.index_id 
ORDER BY OBJECT_NAME(i.[object_id]) OPTION (RECOMPILE);
------

-- This gives you some index usage statistics for in-memory OLTP
-- Returns no data if you are not using in-memory OLTP

-- Guidelines for Using Indexes on Memory-Optimized Tables
-- https://bit.ly/2GCP8lF



-- Look at Columnstore index physical statistics (Query 48) (Columnstore Index Physical Stat)
SELECT OBJECT_NAME(ps.object_id) AS [TableName],  
	i.[name] AS [IndexName], ps.index_id, ps.partition_number,
	ps.delta_store_hobt_id, ps.state_desc, ps.total_rows, ps.size_in_bytes,
	ps.trim_reason_desc, ps.generation, ps.transition_to_compressed_state_desc,
	ps.has_vertipaq_optimization, ps.deleted_rows,
	100 * (ISNULL(ps.deleted_rows, 0))/ps.total_rows AS [Fragmentation]
FROM sys.dm_db_column_store_row_group_physical_stats AS ps WITH (NOLOCK)
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON ps.object_id = i.object_id 
AND ps.index_id = i.index_id
ORDER BY ps.object_id, ps.partition_number, ps.row_group_id OPTION (RECOMPILE);
------

-- sys.dm_db_column_store_row_group_physical_stats (Transact-SQL)
-- https://bit.ly/2q276XQ



-- Get lock waits for current database (Query 49) (Lock Waits)
SELECT o.name AS [table_name], i.name AS [index_name], ios.index_id, ios.partition_number,
		SUM(ios.row_lock_wait_count) AS [total_row_lock_waits], 
		SUM(ios.row_lock_wait_in_ms) AS [total_row_lock_wait_in_ms],
		SUM(ios.page_lock_wait_count) AS [total_page_lock_waits],
		SUM(ios.page_lock_wait_in_ms) AS [total_page_lock_wait_in_ms],
		SUM(ios.page_lock_wait_in_ms)+ SUM(row_lock_wait_in_ms) AS [total_lock_wait_in_ms]
FROM sys.dm_db_index_operational_stats(DB_ID(), NULL, NULL, NULL) AS ios
INNER JOIN sys.objects AS o WITH (NOLOCK)
ON ios.[object_id] = o.[object_id]
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON ios.[object_id] = i.[object_id] 
AND ios.index_id = i.index_id
WHERE o.[object_id] > 100
GROUP BY o.name, i.name, ios.index_id, ios.partition_number
HAVING SUM(ios.page_lock_wait_in_ms)+ SUM(row_lock_wait_in_ms) > 0
ORDER BY total_lock_wait_in_ms DESC OPTION (RECOMPILE);
------

-- This query is helpful for troubleshooting blocking and deadlocking issues



-- Look at UDF execution statistics (Query 50) (UDF Statistics)
SELECT OBJECT_NAME(object_id) AS [Function Name], total_worker_time,
       execution_count, total_elapsed_time,  
       total_elapsed_time/execution_count AS [avg_elapsed_time],  
       last_elapsed_time, last_execution_time, cached_time 
FROM sys.dm_exec_function_stats WITH (NOLOCK) 
WHERE database_id = DB_ID()
ORDER BY total_worker_time DESC OPTION (RECOMPILE); 
------


-- Helps you investigate scalar UDF performance issues

-- sys.dm_exec_function_stats (Transact-SQL)
-- https://bit.ly/2q1Q6BM




-- Get QueryStore Options for this database (Query 51) (QueryStore Options)
SELECT actual_state_desc, desired_state_desc,
       current_storage_size_mb, [max_storage_size_mb], 
	   query_capture_mode_desc, size_based_cleanup_mode_desc
FROM sys.database_query_store_options WITH (NOLOCK) OPTION (RECOMPILE);
------

-- New for SQL Server 2016
-- Requires that QueryStore is enabled for this database

-- Tuning Workload Performance with Query Store
-- https://bit.ly/1kHSl7w


-- Get highest aggregate duration queries over last hour (Query 52) (High Aggregate Duration Queries)
WITH AggregatedDurationLastHour
AS
(SELECT q.query_id, SUM(count_executions * avg_duration) AS total_duration,
   COUNT (distinct p.plan_id) AS number_of_plans
   FROM sys.query_store_query_text AS qt WITH (NOLOCK)
   INNER JOIN sys.query_store_query AS q WITH (NOLOCK)
   ON qt.query_text_id = q.query_text_id
   INNER JOIN sys.query_store_plan AS p WITH (NOLOCK)
   ON q.query_id = p.query_id
   INNER JOIN sys.query_store_runtime_stats AS rs WITH (NOLOCK)
   ON rs.plan_id = p.plan_id
   INNER JOIN sys.query_store_runtime_stats_interval AS rsi WITH (NOLOCK)
   ON rsi.runtime_stats_interval_id = rs.runtime_stats_interval_id
   WHERE rsi.start_time >= DATEADD(hour, -1, GETUTCDATE()) 
   AND rs.execution_type_desc = N'Regular'
   GROUP BY q.query_id),
OrderedDuration AS
(SELECT query_id, total_duration, number_of_plans, 
 ROW_NUMBER () OVER (ORDER BY total_duration DESC, query_id) AS RN
 FROM AggregatedDurationLastHour)
SELECT OBJECT_NAME(q.object_id) AS [Containing Object], qt.query_sql_text, 
od.total_duration AS [Total Duration (microsecs)], 
od.number_of_plans AS [Plan Count],
p.is_forced_plan, p.is_parallel_plan, p.is_trivial_plan,
q.query_parameterization_type_desc, p.[compatibility_level],
p.last_compile_start_time, q.last_execution_time,
CONVERT(xml, p.query_plan) AS query_plan_xml 
FROM OrderedDuration AS od 
INNER JOIN sys.query_store_query AS q WITH (NOLOCK)
ON q.query_id  = od.query_id
INNER JOIN sys.query_store_query_text AS qt WITH (NOLOCK)
ON q.query_text_id = qt.query_text_id
INNER JOIN sys.query_store_plan AS p WITH (NOLOCK)
ON q.query_id = p.query_id
WHERE od.RN <= 50 
ORDER BY total_duration DESC OPTION (RECOMPILE);
------

-- New for SQL Server 2016
-- Requires that QueryStore is enabled for this database


-- Get input buffer information for the current database (Query 53) (Input Buffer)
SELECT es.session_id, DB_NAME(es.database_id) AS [Database Name],
       es.login_time, es.cpu_time, es.logical_reads,
       es.[status], ib.event_info AS [Input Buffer]
FROM sys.dm_exec_sessions AS es WITH (NOLOCK)
CROSS APPLY sys.dm_exec_input_buffer(es.session_id, NULL) AS ib
WHERE es.database_id = DB_ID()
AND es.session_id > 50
AND es.session_id <> @@SPID OPTION (RECOMPILE);
------

-- Gives you input buffer information from all non-system sessions for the current database
-- Replaces DBCC INPUTBUFFER

-- New DMF for retrieving input buffer in SQL Server
-- https://bit.ly/2uHKMbz



-- Get any resumable index rebuild operation information (Query 54) (Resumable Index Rebuild)
SELECT OBJECT_NAME(iro.object_id) AS [Object Name], iro.index_id, iro.name AS [Index Name],
       iro.sql_text, iro.last_max_dop_used, iro.partition_number, iro.state_desc, iro.start_time, iro.percent_complete
FROM  sys.index_resumable_operations AS iro WITH (NOLOCK)
OPTION (RECOMPILE);
------ 

-- index_resumable_operations (Transact-SQL)
-- https://bit.ly/2pYSWqq


-- Get database automatic tuning options (Query 55) (Automatic Tuning Options)
SELECT [name], desired_state_desc, actual_state_desc, reason_desc
FROM sys.database_automatic_tuning_options WITH (NOLOCK)
OPTION (RECOMPILE);
------ 

-- sys.database_automatic_tuning_options (Transact-SQL)
-- https://bit.ly/2FHhLkL



-- Get geo-replication link status for all secondary databases (Query 56) (Geo-Replication Link Status)
SELECT link_guid, partner_server, partner_database, last_replication, 
       replication_lag_sec, replication_state_desc, role_desc, secondary_allow_connections_desc 
FROM sys.dm_geo_replication_link_status WITH (NOLOCK) OPTION (RECOMPILE);
------  

-- sys.dm_geo_replication_link_status (Azure SQL Database)
-- https://bit.ly/2GwIqC2



-- Retrieve some Azure SQL Database properties (Query 57) (Azure SQL DB Properties)
SELECT DATABASEPROPERTYEX (DB_NAME(DB_ID()), 'Edition') AS [Database Edition],
	   DATABASEPROPERTYEX (DB_NAME(DB_ID()), 'ServiceObjective') AS [Service Objective],
	   DATABASEPROPERTYEX (DB_NAME(DB_ID()), 'MaxSizeInBytes') AS [Max Size In Bytes],
	   DATABASEPROPERTYEX (DB_NAME(DB_ID()), 'IsXTPSupported') AS [Is XTP Supported]
	   OPTION (RECOMPILE);   
------  

-- DATABASEPROPERTYEX (Transact-SQL)
-- https://bit.ly/2ItexPg





-- Sign up for Microsoft Visual Studio Dev Essentials and get a free three month pass to Pluralsight

-- Microsoft Visual Studio Dev Essentials
-- https://bit.ly/1q6xbDL


-- Sign up for Microsoft Azure Essentials and get lots of free Azure usage credits, MCP exam voucher, three month Pluralsight subscription

-- Microsoft Azure Essentials
-- https://bit.ly/2KH91dQ

tools\dbatools\bin\smo\Accessibility.dll

md5: FC53B66F0B862A05CF533B44A1CAEDBB | sha1: 5E5BD9F1A9E6D8EA047E17BE5BE2D387CA1AB8E9 | sha256: 3594B22AB2FD554E1890B48D5E64C0A6A70A0CABD00B7453E8C921C11C08D5E6 | sha512: D45E01CA7A48124667FAA37A51F9452E95E69DC72C718D583E17A77888976C6B8378ED82CF0B9DB7BF1177E8D77FB0FC5A04846396D70867DA45BFCBE2DEB592

tools\dbatools\bin\smo\coreclr\Microsoft.Data.Tools.Schema.Sql.dll

md5: C949159E35D7BC0CE907F5F9863B44F8 | sha1: 9032020AA97E427CF64B7B7F2D9975BAC9FB5DDF | sha256: 1BD2BCAC522CABD9973B096BC4451CE148C1133D266B780CA084F418A552C2A8 | sha512: F56794D462619DA3E2294663DE2AFE81655ADBA247210F54157B799CDC071C404FD7CB1DE74B9095C40EDD4B8FCB90D8E2F0D52DBB2DBB38B9E465FB70D031EE

tools\dbatools\bin\smo\coreclr\Microsoft.Data.Tools.Sql.BatchParser.dll

md5: 7A8973D169B8DB417BD63FD476682B25 | sha1: 166E192615363BA4683ABCA46B1BE73B988E6EA0 | sha256: 8E25B727FCD8E5DAA76DB626325CE742487E7F59BB12F54B69FE542C60F3DFF1 | sha512: 2262458CCEFAB75E53481BE6CB19D5747B17A6D1B107FA63C3DC5A1CE14F270255261CE7B1942B3C7C48954B7665D936FD23CA5D98A66BE83AAF20BDD38F4FC4

tools\dbatools\bin\smo\coreclr\Microsoft.Data.Tools.Utilities.dll

md5: F6B41E593517B2EF5439D83719C5042E | sha1: B0DB12985A2DB9161389059FC35DAC273C1593B2 | sha256: 69C4506E42EA98069D89916CF53D7937D8B3D569EFDED4BAA287F67B5BAC2605 | sha512: C4742C9DB589A607C29E50AC7A5924A28C91F9C33E4E6C4847494ADBC167ACAEB47DFB26214DA24F442EF7EFEF75056575B205B4018AEB59485E0F7B39D8732F

tools\dbatools\bin\smo\coreclr\Microsoft.SqlServer.ConnectionInfo.dll

md5: 87C68BAE8942C6634787A8635FF21DCD | sha1: 1BE70E360582B34646CCACEA245542880D4C1F65 | sha256: 1C14F3FCAABD17338F606E3F576A4BACCEDB51697B5E369A26ED086D0BBD47B8 | sha512: D3AFBE4818B06DDF19B87EE3245655B1F3793C24ACBCFBBCC8D1AAC7FCFA65F7769406AE6188F22B1C23093FC79D0D48ED191E4EE050A5E31B22133F4833C6DC

tools\dbatools\bin\smo\coreclr\Microsoft.SqlServer.Dac.dll

md5: DA50A395F84D20AB342D661670BB2E88 | sha1: D2FAACC7621D68FA6B3C94DB81D61B0FEE25BD79 | sha256: 19424A535BD8F3B4053FCC4E58B6B029AF26E2B920695FF1524A4AF111DCA6B5 | sha512: E65656A1DA259701C5218C0059297FD00F72DE759730AF347304B030A87DDCB92E501E454553D597011FCC1D5C761C8A6A4C197A90B6FEE91C1AA37604DE26F5

tools\dbatools\bin\smo\coreclr\Microsoft.SqlServer.Dac.Extensions.dll

md5: F50C79A8C827DE7EF9CE07018AB1FC52 | sha1: 4FF1BE4B40AE66DDF7F417DDCE4972BD0B56DC4D | sha256: 106604D0FE26C3F3FA1749CD6777EA5270AD467B958E5180D788DC0F6CCDB450 | sha512: C38BD847A5EA5B0BC1ABABC77889A2BA05284E5FF8CA09F6DB9488FFC671E4C6B26D4E111359791921F4DE1A0A359383D77412EE41C23FD8E54F07BC4F880679

tools\dbatools\bin\diagnosticquery\SQLServerDiagnosticQueries_2017_201810.sql


-- SQL Server 2017 Diagnostic Information Queries
-- Glenn Berry 
-- Last Modified: November 20, 2018
-- https://www.sqlskills.com/blogs/glenn/
-- http://sqlserverperformance.wordpress.com/
-- Twitter: GlennAlanBerry

-- Please listen to my Pluralsight courses
-- https://www.pluralsight.com/author/glenn-berry

-- If you want to find all of our SQLskills SQL101 blog posts, check out https://bit.ly/2qLwfXW


-- Please make sure you are using the correct version of these diagnostic queries for your version of SQL Server


-- If you like PowerShell, there is a very useful community solution for running these queries in an automated fashion
-- https://dbatools.io/

-- Invoke-DbaDiagnosticQuery
-- https://dbatools.io/functions/invoke-dbadiagnosticquery/


--******************************************************************************
--*   Copyright (C) 2018 Glenn Berry, SQLskills.com
--*   All rights reserved. 
--*
--*   For more scripts and sample code, check out 
--*      https://www.sqlskills.com/blogs/glenn
--*
--*   You may alter this code for your own *non-commercial* purposes. You may
--*   republish altered code as long as you include this copyright and give due credit. 
--*
--*
--*   THIS CODE AND INFORMATION ARE PROVIDED "AS IS" WITHOUT WARRANTY OF 
--*   ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED 
--*   TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A
--*   PARTICULAR PURPOSE. 
--*
--******************************************************************************

-- Check the major product version to see if it is SQL Server 2017 CTP 1 or greater
IF NOT EXISTS (SELECT * WHERE CONVERT(varchar(128), SERVERPROPERTY('ProductVersion')) LIKE '14%')
	BEGIN
		DECLARE @ProductVersion varchar(128) = CONVERT(varchar(128), SERVERPROPERTY('ProductVersion'));
		RAISERROR ('Script does not match the ProductVersion [%s] of this instance. Many of these queries may not work on this version.' , 18 , 16 , @ProductVersion);
	END
	ELSE
		PRINT N'You have the correct major version of SQL Server for this diagnostic information script';
	

-- Instance level queries *******************************

-- SQL and OS Version information for current instance  (Query 1) (Version Info)
SELECT @@SERVERNAME AS [Server Name], @@VERSION AS [SQL Server and OS Version Info];
------

-- SQL Server 2017 Builds																		
-- Build			Description							Release Date	URL to KB Article								
-- 14.0.1.246		CTP 1.0								11/30/2016
-- 14.0.100.187		CTP 1.1								12/16/2016
-- 14.0.200.24		CTP 1.2								1/19/2017
-- 14.0.304.138		CTP 1.3								2/17/2017
-- 14.0.405.198		CTP 1.4								3/20/2017
-- 14.0.500.272		CTP 2.0								4/19/2017
-- 14.0.600.250		CTP 2.1								5/17/2017
-- 14.0.800.90		RC1									7/17/2017
-- 14.0.900.75		RC2									8/2/2017
-- 14.0.1000.169	RTM									10/2/2017
-- 14.0.3006.16		CU1									10/24/2017		https://support.microsoft.com/en-us/help/4038634
-- 14.0.3008.27		CU2									11/28/2017		https://support.microsoft.com/en-us/help/4052574
-- 14.0.3015.40		CU3									1/4/2018		https://support.microsoft.com/en-us/help/4052987
-- 14.0.3022.28		CU4									2/20/2018	    https://support.microsoft.com/en-us/help/4056498
-- 14.0.3023.8		CU5									3/20/2018		https://support.microsoft.com/en-us/help/4092643
-- 14.0.3025.34		CU6									4/17/2018	    https://support.microsoft.com/en-us/help/4101464
-- 14.0.3026.27		CU7									5/23/2018		https://support.microsoft.com/en-us/help/4229789
-- 14.0.3029.16		CU8									6/19/2018		https://support.microsoft.com/en-us/help/4338363
-- 14.0.3030.27		CU9									7/19/2018		https://support.microsoft.com/en-us/help/4341265
-- 14.0.3035.2		CU9 + Security Update				8/13/2018		https://www.microsoft.com/en-us/download/details.aspx?id=57263
-- 14.0.3037.1		CU10								8/27/2018		https://support.microsoft.com/en-us/help/4342123/cumulative-update-10-for-sql-server-2017
-- 14.0.3038.14		CU11								9/20/2018		https://support.microsoft.com/en-us/help/4462262	
-- 14.0.3045.24		CU12								10/23/2018		https://support.microsoft.com/en-us/help/4464082/cumulative-update-12-for-sql-server-2017
		
															

-- How to determine the version, edition and update level of SQL Server and its components 
-- https://bit.ly/2oAjKgW	

-- SQL Server 2017 build versions
-- https://bit.ly/2FLY88I

-- Performance and Stability Fixes in SQL Server 2017 CU Builds
-- https://bit.ly/2GV3CNM

-- What's New in SQL Server 2017 (Database Engine)
-- https://bit.ly/2HjSeyQ

-- What's New in SQL Server 2017
-- https://bit.ly/2saQ4Yh

-- Announcing the Modern Servicing Model for SQL Server
-- https://bit.ly/2xHnh0l

-- SQL Server Service Packs are discontinued starting from SQL Server 2017 
-- https://bit.ly/2GTkbgt 

-- Update Center for Microsoft SQL Server
-- https://bit.ly/2pZptuQ

-- Download SQL Server Management Studio (SSMS)
-- https://bit.ly/1OcupT9

-- Download and install Azure Data Studio  
-- https://bit.ly/2vgke1A



-- Get socket, physical core and logical core count from the SQL Server Error log. (Query 2) (Core Counts)
-- This query might take a few seconds depending on the size of your error log
EXEC sys.xp_readerrorlog 0, 1, N'detected', N'socket';
------

-- This can help you determine the exact core counts used by SQL Server and whether HT is enabled or not
-- It can also help you confirm your SQL Server licensing model
-- Be on the lookout for this message "using 40 logical processors based on SQL Server licensing" 
-- (when you have more than 40 logical cores) which means grandfathered Server/CAL licensing
-- This query will return no results if your error log has been recycled since the instance was last started



-- Get selected server properties (Query 3) (Server Properties)
SELECT SERVERPROPERTY('MachineName') AS [MachineName], 
SERVERPROPERTY('ServerName') AS [ServerName],  
SERVERPROPERTY('InstanceName') AS [Instance], 
SERVERPROPERTY('IsClustered') AS [IsClustered], 
SERVERPROPERTY('ComputerNamePhysicalNetBIOS') AS [ComputerNamePhysicalNetBIOS], 
SERVERPROPERTY('Edition') AS [Edition], 
SERVERPROPERTY('ProductLevel') AS [ProductLevel],				-- What servicing branch (RTM/SP/CU)
SERVERPROPERTY('ProductUpdateLevel') AS [ProductUpdateLevel],	-- Within a servicing branch, what CU# is applied
SERVERPROPERTY('ProductVersion') AS [ProductVersion],
SERVERPROPERTY('ProductMajorVersion') AS [ProductMajorVersion], 
SERVERPROPERTY('ProductMinorVersion') AS [ProductMinorVersion], 
SERVERPROPERTY('ProductBuild') AS [ProductBuild], 
SERVERPROPERTY('ProductBuildType') AS [ProductBuildType],			  -- Is this a GDR or OD hotfix (NULL if on a CU build)
SERVERPROPERTY('ProductUpdateReference') AS [ProductUpdateReference], -- KB article number that is applicable for this build
SERVERPROPERTY('ProcessID') AS [ProcessID],
SERVERPROPERTY('Collation') AS [Collation], 
SERVERPROPERTY('IsFullTextInstalled') AS [IsFullTextInstalled], 
SERVERPROPERTY('IsIntegratedSecurityOnly') AS [IsIntegratedSecurityOnly],
SERVERPROPERTY('FilestreamConfiguredLevel') AS [FilestreamConfiguredLevel],
SERVERPROPERTY('IsHadrEnabled') AS [IsHadrEnabled], 
SERVERPROPERTY('HadrManagerStatus') AS [HadrManagerStatus],
SERVERPROPERTY('InstanceDefaultDataPath') AS [InstanceDefaultDataPath],
SERVERPROPERTY('InstanceDefaultLogPath') AS [InstanceDefaultLogPath],
SERVERPROPERTY('BuildClrVersion') AS [Build CLR Version],
SERVERPROPERTY('IsXTPSupported') AS [IsXTPSupported],
SERVERPROPERTY('IsPolybaseInstalled') AS [IsPolybaseInstalled],				-- New for SQL Server 2016
SERVERPROPERTY('IsAdvancedAnalyticsInstalled') AS [IsRServicesInstalled];	-- New for SQL Server 2016
------

-- This gives you a lot of useful information about your instance of SQL Server,
-- such as the ProcessID for SQL Server and your collation
-- Note: Some columns will be NULL on older SQL Server builds

-- SERVERPROPERTY (Transact-SQL)
-- https://bit.ly/2eeaXeI



-- Get instance-level configuration values for instance  (Query 4) (Configuration Values)
SELECT name, value, value_in_use, minimum, maximum, [description], is_dynamic, is_advanced
FROM sys.configurations WITH (NOLOCK)
ORDER BY name OPTION (RECOMPILE);
------

-- Focus on these settings:
-- automatic soft-NUMA disabled (should be 0 in most cases)
-- backup checksum default (should be 1)
-- backup compression default (should be 1 in most cases)
-- clr enabled (only enable if it is needed)
-- cost threshold for parallelism (depends on your workload)
-- lightweight pooling (should be zero)
-- max degree of parallelism (depends on your workload and hardware)
-- max server memory (MB) (set to an appropriate value, not the default)
-- optimize for ad hoc workloads (should be 1)
-- priority boost (should be zero)
-- remote admin connections (should be 1)

-- New configuration options for SQL Server 2017
-- clr strict security is new in SQL Server 2017, and is enabled by default

-- sys.configurations (Transact-SQL)
-- https://bit.ly/2HsyDZI


-- Returns a list of all global trace flags that are enabled (Query 5) (Global Trace Flags)
DBCC TRACESTATUS (-1);
------

-- If no global trace flags are enabled, no results will be returned.
-- It is very useful to know what global trace flags are currently enabled as part of the diagnostic process.

-- Common trace flags that should be enabled in most cases
-- TF 3226 - Supresses logging of successful database backup messages to the SQL Server Error Log
--           https://bit.ly/2p6MTjS  

-- TF 6534 - Enables use of native code to improve performance with spatial data
--           https://bit.ly/2HrQUpU         

-- The behavior of TF 1117, 1118 are enabled for tempdb in SQL Server 2016 by default
-- SQL 2016 � It Just Runs Faster: -T1117 and -T1118 changes for TEMPDB and user databases
-- https://bit.ly/2lbNWxK           

-- The behavior of TF 2371 is enabled by default in SQL Server 2016 and newer (in compat level 130 and higher)

-- DBCC TRACEON - Trace Flags (Transact-SQL)
-- https://bit.ly/2FuSvPg





-- Returns status of instant file initialization (Query 6) (IFI Status)
EXEC sys.xp_readerrorlog 0, 1, N'Database Instant File Initialization';
------

-- Lets you determine whether Instant File Initialization (IFI) is enabled for the instance
-- This should be enabled in the vast majority of cases
-- SQL Server 2016 and newer lets you enable this during the SQL server installation process

-- Database Instant File Initialization
-- https://bit.ly/2nTX74y

-- Misconceptions around instant file initialization
-- https://bit.ly/2oBSKgZ



-- SQL Server Process Address space info  (Query 7) (Process Memory)
-- (shows whether locked pages is enabled, among other things)
SELECT physical_memory_in_use_kb/1024 AS [SQL Server Memory Usage (MB)],
	   locked_page_allocations_kb/1024 AS [SQL Server Locked Pages Allocation (MB)],
       large_page_allocations_kb/1024 AS [SQL Server Large Pages Allocation (MB)], 
	   page_fault_count, memory_utilization_percentage, available_commit_limit_kb, 
	   process_physical_memory_low, process_virtual_memory_low
FROM sys.dm_os_process_memory WITH (NOLOCK) OPTION (RECOMPILE);
------

-- You want to see 0 for process_physical_memory_low
-- You want to see 0 for process_virtual_memory_low
-- This indicates that you are not under internal memory pressure
-- If locked_page_allocations_kb > 0, then LPIM is enabled

-- How to enable the "locked pages" feature in SQL Server 2012
-- https://bit.ly/2F5UjOA

-- Memory Management Architecture Guide
-- https://bit.ly/2JKkadC 



-- SQL Server Services information (Query 8) (SQL Server Services Info)
SELECT servicename, process_id, startup_type_desc, status_desc, 
last_startup_time, service_account, is_clustered, cluster_nodename, [filename], 
instant_file_initialization_enabled
FROM sys.dm_server_services WITH (NOLOCK) OPTION (RECOMPILE);
------

-- Tells you the account being used for the SQL Server Service and the SQL Agent Service
-- Shows the process_id, when they were last started, and their current status
-- Also shows whether you are running on a failover cluster instance, and what node you are running on
-- Also shows whether IFI is enabled

-- sys.dm_server_services (Transact-SQL)
-- https://bit.ly/2oKa1Un


-- Last backup information by database  (Query 9) (Last Backup By Database)
SELECT ISNULL(d.[name], bs.[database_name]) AS [Database], d.recovery_model_desc AS [Recovery Model], 
       d.log_reuse_wait_desc AS [Log Reuse Wait Desc],
    MAX(CASE WHEN [type] = 'D' THEN bs.backup_finish_date ELSE NULL END) AS [Last Full Backup],
    MAX(CASE WHEN [type] = 'I' THEN bs.backup_finish_date ELSE NULL END) AS [Last Differential Backup],
    MAX(CASE WHEN [type] = 'L' THEN bs.backup_finish_date ELSE NULL END) AS [Last Log Backup]
FROM sys.databases AS d WITH (NOLOCK)
LEFT OUTER JOIN msdb.dbo.backupset AS bs WITH (NOLOCK)
ON bs.[database_name] = d.[name] 
AND bs.backup_finish_date > GETDATE()- 30
WHERE d.name <> N'tempdb'
GROUP BY ISNULL(d.[name], bs.[database_name]), d.recovery_model_desc, d.log_reuse_wait_desc, d.[name] 
ORDER BY d.recovery_model_desc, d.[name] OPTION (RECOMPILE);
------

-- This helps you spot runaway transaction logs and other issues with your backup schedule


-- Get SQL Server Agent jobs and Category information (Query 10) (SQL Server Agent Jobs)
SELECT sj.name AS [Job Name], sj.[description] AS [Job Description], SUSER_SNAME(sj.owner_sid) AS [Job Owner],
sj.date_created AS [Date Created], sj.[enabled] AS [Job Enabled], 
sj.notify_email_operator_id, sj.notify_level_email, sc.name AS [CategoryName],
s.[enabled] AS [Sched Enabled], js.next_run_date, js.next_run_time
FROM msdb.dbo.sysjobs AS sj WITH (NOLOCK)
INNER JOIN msdb.dbo.syscategories AS sc WITH (NOLOCK)
ON sj.category_id = sc.category_id
LEFT OUTER JOIN msdb.dbo.sysjobschedules AS js WITH (NOLOCK)
ON sj.job_id = js.job_id
LEFT OUTER JOIN msdb.dbo.sysschedules AS s WITH (NOLOCK)
ON js.schedule_id = s.schedule_id
ORDER BY sj.name OPTION (RECOMPILE);
------

-- Gives you some basic information about your SQL Server Agent jobs, who owns them and how they are configured
-- Look for Agent jobs that are not owned by sa
-- Look for jobs that have a notify_email_operator_id set to 0 (meaning no operator)
-- Look for jobs that have a notify_level_email set to 0 (meaning no e-mail is ever sent)
--
-- MSDN sysjobs documentation
-- https://bit.ly/2paDEOP 

-- SQL Server Maintenance Solution
-- https://bit.ly/1pgchQu  


-- Get SQL Server Agent Alert Information (Query 11) (SQL Server Agent Alerts)
SELECT name, event_source, message_id, severity, [enabled], has_notification, 
       delay_between_responses, occurrence_count, last_occurrence_date, last_occurrence_time
FROM msdb.dbo.sysalerts WITH (NOLOCK)
ORDER BY name OPTION (RECOMPILE);
------

-- Gives you some basic information about your SQL Server Agent Alerts 
-- (which are different from SQL Server Agent jobs)
-- Read more about Agent Alerts here: https://bit.ly/2Giz0Xf 



-- Host information (Query 12) (Host Info)
SELECT host_platform, host_distribution, host_release, 
       host_service_pack_level, host_sku, os_language_version 
FROM sys.dm_os_host_info WITH (NOLOCK) OPTION (RECOMPILE); 
------

-- host_release codes (only valid for Windows)
-- 10.0 is either Windows 10 or Windows Server 2016
-- 6.3 is either Windows 8.1 or Windows Server 2012 R2 
-- 6.2 is either Windows 8 or Windows Server 2012


-- host_sku codes (only valid for Windows)
-- 4 is Enterprise Edition
-- 7 is Standard Server Edition
-- 8 is Datacenter Server Edition
-- 10 is Enterprise Server Edition
-- 48 is Professional Edition
-- 161 is Pro for Workstations

-- 1033 for os_language_version is US-English

-- SQL Server 2017 requires Windows Server 2012 or newer

-- Hardware and Software Requirements for Installing SQL Server
-- https://bit.ly/2y3ka5L

-- Using SQL Server in Windows 8 and later versions of Windows operating system
-- https://bit.ly/2F7Ax0P 


-- SQL Server NUMA Node information  (Query 13) (SQL Server NUMA Info)
SELECT node_id, node_state_desc, memory_node_id, processor_group, cpu_count, online_scheduler_count, 
       idle_scheduler_count, active_worker_count, avg_load_balance, resource_monitor_state
FROM sys.dm_os_nodes WITH (NOLOCK) 
WHERE node_state_desc <> N'ONLINE DAC' OPTION (RECOMPILE);
------

-- Gives you some useful information about the composition and relative load on your NUMA nodes
-- You want to see an equal number of schedulers on each NUMA node
-- Watch out if SQL Server 2017 Standard Edition has been installed 
-- on a physical or virtual machine with more than four sockets or more than 24 physical cores

-- sys.dm_os_nodes (Transact-SQL)
-- https://bit.ly/2pn5Mw8

-- Balancing Your Available SQL Server Core Licenses Evenly Across NUMA Nodes
-- https://bit.ly/2vfC4Rq



-- Good basic information about OS memory amounts and state  (Query 14) (System Memory)
SELECT total_physical_memory_kb/1024 AS [Physical Memory (MB)], 
       available_physical_memory_kb/1024 AS [Available Memory (MB)], 
       total_page_file_kb/1024 AS [Total Page File (MB)], 
	   available_page_file_kb/1024 AS [Available Page File (MB)], 
	   system_cache_kb/1024 AS [System Cache (MB)],
       system_memory_state_desc AS [System Memory State]
FROM sys.dm_os_sys_memory WITH (NOLOCK) OPTION (RECOMPILE);
------

-- You want to see "Available physical memory is high" for System Memory State
-- This indicates that you are not under external memory pressure

-- Possible System Memory State values:
-- Available physical memory is high
-- Physical memory usage is steady
-- Available physical memory is low
-- Available physical memory is running low
-- Physical memory state is transitioning

-- sys.dm_os_sys_memory (Transact-SQL)
-- https://bit.ly/2pcV0xq



-- You can skip the next two queries if you know you don't have a clustered instance


-- Get information about your cluster nodes and their status  (Query 15) (Cluster Node Properties)
-- (if your database server is in a failover cluster)
SELECT NodeName, status_description, is_current_owner
FROM sys.dm_os_cluster_nodes WITH (NOLOCK) OPTION (RECOMPILE);
------

-- Knowing which node owns the cluster resources is critical
-- Especially when you are installing Windows or SQL Server updates
-- You will see no results if your instance is not clustered

-- Recommended hotfixes and updates for Windows Server 2012 R2-based failover clusters
-- https://bit.ly/1z5BfCw


-- Get information about any AlwaysOn AG cluster this instance is a part of (Query 16) (AlwaysOn AG Cluster)
SELECT cluster_name, quorum_type_desc, quorum_state_desc
FROM sys.dm_hadr_cluster WITH (NOLOCK) OPTION (RECOMPILE);
------

-- You will see no results if your instance is not using AlwaysOn AGs


-- Good overview of AG health and status (Query 17) (AlwaysOn AG Status)
SELECT ag.name AS [AG Name], ar.replica_server_name, ar.availability_mode_desc, adc.[database_name], 
       drs.is_local, drs.is_primary_replica, drs.synchronization_state_desc, drs.is_commit_participant, 
	   drs.synchronization_health_desc, drs.recovery_lsn, drs.truncation_lsn, drs.last_sent_lsn, 
	   drs.last_sent_time, drs.last_received_lsn, drs.last_received_time, drs.last_hardened_lsn, 
	   drs.last_hardened_time, drs.last_redone_lsn, drs.last_redone_time, drs.log_send_queue_size, 
	   drs.log_send_rate, drs.redo_queue_size, drs.redo_rate, drs.filestream_send_rate, 
	   drs.end_of_log_lsn, drs.last_commit_lsn, drs.last_commit_time, drs.database_state_desc 
FROM sys.dm_hadr_database_replica_states AS drs WITH (NOLOCK)
INNER JOIN sys.availability_databases_cluster AS adc WITH (NOLOCK)
ON drs.group_id = adc.group_id 
AND drs.group_database_id = adc.group_database_id
INNER JOIN sys.availability_groups AS ag WITH (NOLOCK)
ON ag.group_id = drs.group_id
INNER JOIN sys.availability_replicas AS ar WITH (NOLOCK)
ON drs.group_id = ar.group_id 
AND drs.replica_id = ar.replica_id
ORDER BY ag.name, ar.replica_server_name, adc.[database_name] OPTION (RECOMPILE);

-- You will see no results if your instance is not using AlwaysOn AGs

-- SQL Server 2016 � It Just Runs Faster: Always On Availability Groups Turbocharged
-- https://bit.ly/2dn1H6r


-- Hardware information from SQL Server 2017  (Query 18) (Hardware Info)
SELECT cpu_count AS [Logical CPU Count], scheduler_count, 
       (socket_count * cores_per_socket) AS [Physical Core Count], 
       socket_count AS [Socket Count], cores_per_socket, numa_node_count,
       physical_memory_kb/1024 AS [Physical Memory (MB)], 
       max_workers_count AS [Max Workers Count], 
	   affinity_type_desc AS [Affinity Type], 
       sqlserver_start_time AS [SQL Server Start Time],
	   DATEDIFF(hour, sqlserver_start_time, GETDATE()) AS [SQL Server Up Time (hrs)],
	   virtual_machine_type_desc AS [Virtual Machine Type], 
       softnuma_configuration_desc AS [Soft NUMA Configuration], 
	   sql_memory_model_desc, process_physical_affinity -- New in SQL Server 2017
FROM sys.dm_os_sys_info WITH (NOLOCK) OPTION (RECOMPILE);
------

-- Gives you some good basic hardware information about your database server
-- Note: virtual_machine_type_desc of HYPERVISOR does not automatically mean you are running SQL Server inside of a VM
-- It merely indicates that you have a hypervisor running on your host

-- sys.dm_os_sys_info (Transact-SQL)
-- https://bit.ly/2pczOYs

-- Soft NUMA configuration was a new column for SQL Server 2016
-- OFF = Soft-NUMA feature is OFF
-- ON = SQL Server automatically determines the NUMA node sizes for Soft-NUMA
-- MANUAL = Manually configured soft-NUMA

-- Configure SQL Server to Use Soft-NUMA (SQL Server)
-- https://bit.ly/2HTpKJt

-- sql_memory_model_desc values (Added in SQL Server 2016 SP1)
-- CONVENTIONAL
-- LOCK_PAGES
-- LARGE_PAGES
   

-- Get System Manufacturer and model number from SQL Server Error log (Query 19) (System Manufacturer)
EXEC sys.xp_readerrorlog 0, 1, N'Manufacturer';
------ 

-- This can help you determine the capabilities and capacities of your database server
-- Can also be used to confirm if you are running in a VM
-- This query might take a few seconds if you have not recycled your error log recently
-- This query will return no results if your error log has been recycled since the instance was started


-- Get pvscsi info from Windows Registry  (Query 20) (PVSCSI Driver Parameters)
EXEC sys.xp_instance_regread N'HKEY_LOCAL_MACHINE', N'SYSTEM\CurrentControlSet\services\pvscsi\Parameters\Device', N'DriverParameter';
------

-- This is valid for VMware VMs
-- Recommended value for intensive I/O patterns from VMware is: RequestRingPages=32,MaxQueueDepth=254
-- https://kb.vmware.com/s/article/2053145



-- Get BIOS date from Windows Registry (Query 21) (BIOS Date)
EXEC sys.xp_instance_regread N'HKEY_LOCAL_MACHINE', N'HARDWARE\DESCRIPTION\System\BIOS', N'BiosReleaseDate';
------

-- Helps you understand whether the main system BIOS is up to date, and the possible age of the hardware
-- Not as useful for virtualization


-- Get processor description from Windows Registry  (Query 22) (Processor Description)
EXEC sys.xp_instance_regread N'HKEY_LOCAL_MACHINE', N'HARDWARE\DESCRIPTION\System\CentralProcessor\0', N'ProcessorNameString';
------

-- Gives you the model number and rated clock speed of your processor(s)
-- Your processors may be running at less than the rated clock speed due
-- to the Windows Power Plan or hardware power management

-- You can use CPU-Z to get your actual CPU core speed and a lot of other useful information
-- https://bit.ly/QhR6xF

-- You can learn more about processor selection for SQL Server by following this link
-- https://bit.ly/2F3aVlP



-- See if buffer pool extension (BPE) is enabled (Query 23) (BPE Configuration)
SELECT [path], state_description, current_size_in_kb, 
CAST(current_size_in_kb/1048576.0 AS DECIMAL(10,2)) AS [Size (GB)]
FROM sys.dm_os_buffer_pool_extension_configuration WITH (NOLOCK) OPTION (RECOMPILE);
------

-- BPE is available in both Standard Edition and Enterprise Edition
-- It is a more interesting feature for Standard Edition

-- Buffer Pool Extension to SSDs in SQL Server 2014
-- https://bit.ly/1bm08m8

-- Buffer Pool Extension
-- https://bit.ly/2oBuieO



-- Look at buffer descriptors to see BPE usage by database (Query 24) (BPE Usage) 
SELECT DB_NAME(database_id) AS [Database Name], COUNT(page_id) AS [Page Count],
CAST(COUNT(*)/128.0 AS DECIMAL(10, 2)) AS [Buffer size(MB)], 
AVG(read_microsec) AS [Avg Read Time (microseconds)]
FROM sys.dm_os_buffer_descriptors WITH (NOLOCK)
WHERE database_id <> 32767
AND is_in_bpool_extension = 1
GROUP BY DB_NAME(database_id) 
ORDER BY [Buffer size(MB)] DESC OPTION (RECOMPILE);
------

-- You will see no results if BPE is not enabled or if there is no BPE usage


-- Get information on location, time and size of any memory dumps from SQL Server  (Query 25) (Memory Dump Info)
SELECT [filename], creation_time, size_in_bytes/1048576.0 AS [Size (MB)]
FROM sys.dm_server_memory_dumps WITH (NOLOCK) 
ORDER BY creation_time DESC OPTION (RECOMPILE);
------

-- This will not return any rows if you have 
-- not had any memory dumps (which is a good thing)

-- sys.dm_server_memory_dumps (Transact-SQL)
-- https://bit.ly/2elwWll



-- Look at Suspect Pages table (Query 26) (Suspect Pages)
SELECT DB_NAME(database_id) AS [Database Name], [file_id], page_id, 
       event_type, error_count, last_update_date 
FROM msdb.dbo.suspect_pages WITH (NOLOCK)
ORDER BY database_id OPTION (RECOMPILE);
------

-- event_type value descriptions
-- 1 = 823 error caused by an operating system CRC error
--     or 824 error other than a bad checksum or a torn page (for example, a bad page ID)
-- 2 = Bad checksum
-- 3 = Torn page
-- 4 = Restored (The page was restored after it was marked bad)
-- 5 = Repaired (DBCC repaired the page)
-- 7 = Deallocated by DBCC

-- Ideally, this query returns no results. The table is limited to 1000 rows.
-- If you do get results here, you should do further investigation to determine the root cause

-- Manage the suspect_pages Table
-- https://bit.ly/2Fvr1c9


-- Get number of data files in tempdb database (Query 27) (TempDB Data Files)
EXEC sys.xp_readerrorlog 0, 1, N'The tempdb database has';
------

-- Get the number of data files in the tempdb database
-- 4-8 data files that are all the same size is a good starting point
-- This query will return no results if your error log has been recycled since the instance was last started


-- File names and paths for all user and system databases on instance  (Query 28) (Database Filenames and Paths)
SELECT DB_NAME([database_id]) AS [Database Name], 
       [file_id], [name], physical_name, [type_desc], state_desc,
	   is_percent_growth, growth,
	   CONVERT(bigint, growth/128.0) AS [Growth in MB], 
       CONVERT(bigint, size/128.0) AS [Total Size in MB]
FROM sys.master_files WITH (NOLOCK)
ORDER BY DB_NAME([database_id]), [file_id] OPTION (RECOMPILE);
------

-- Things to look at:
-- Are data files and log files on different drives?
-- Is everything on the C: drive?
-- Is tempdb on dedicated drives?
-- Is there only one tempdb data file?
-- Are all of the tempdb data files the same size?
-- Are there multiple data files for user databases?
-- Is percent growth enabled for any files (which is bad)?


-- Drive information for all fixed drives visible to the operating system (Query 29) (Fixed Drives)
SELECT fixed_drive_path, drive_type_desc, 
CONVERT(DECIMAL(18,2), free_space_in_bytes/1073741824.0) AS [Available Space (GB)]
FROM sys.dm_os_enumerate_fixed_drives WITH (NOLOCK) OPTION (RECOMPILE);
------

-- This shows all of your fixed drives, not just LUNs with SQL Server database files



-- Volume info for all LUNS that have database files on the current instance (Query 30) (Volume Info)
SELECT DISTINCT vs.volume_mount_point, vs.file_system_type, vs.logical_volume_name, 
CONVERT(DECIMAL(18,2), vs.total_bytes/1073741824.0) AS [Total Size (GB)],
CONVERT(DECIMAL(18,2), vs.available_bytes/1073741824.0) AS [Available Size (GB)],  
CONVERT(DECIMAL(18,2), vs.available_bytes * 1. / vs.total_bytes * 100.) AS [Space Free %],
vs.supports_compression, vs.is_compressed, 
vs.supports_sparse_files, vs.supports_alternate_streams
FROM sys.master_files AS f WITH (NOLOCK)
CROSS APPLY sys.dm_os_volume_stats(f.database_id, f.[file_id]) AS vs 
ORDER BY vs.volume_mount_point OPTION (RECOMPILE);
------

-- Shows you the total and free space on the LUNs where you have database files
-- Being low on free space can negatively affect performance

-- sys.dm_os_volume_stats (Transact-SQL)
-- https://bit.ly/2oBPNNr



-- Drive level latency information (Query 31) (Drive Level Latency)
-- Based on code from Jimmy May
SELECT tab.[Drive], tab.volume_mount_point AS [Volume Mount Point], 
	CASE 
		WHEN num_of_reads = 0 THEN 0 
		ELSE (io_stall_read_ms/num_of_reads) 
	END AS [Read Latency],
	CASE 
		WHEN num_of_writes = 0 THEN 0 
		ELSE (io_stall_write_ms/num_of_writes) 
	END AS [Write Latency],
	CASE 
		WHEN (num_of_reads = 0 AND num_of_writes = 0) THEN 0 
		ELSE (io_stall/(num_of_reads + num_of_writes)) 
	END AS [Overall Latency],
	CASE 
		WHEN num_of_reads = 0 THEN 0 
		ELSE (num_of_bytes_read/num_of_reads) 
	END AS [Avg Bytes/Read],
	CASE 
		WHEN num_of_writes = 0 THEN 0 
		ELSE (num_of_bytes_written/num_of_writes) 
	END AS [Avg Bytes/Write],
	CASE 
		WHEN (num_of_reads = 0 AND num_of_writes = 0) THEN 0 
		ELSE ((num_of_bytes_read + num_of_bytes_written)/(num_of_reads + num_of_writes)) 
	END AS [Avg Bytes/Transfer]
FROM (SELECT LEFT(UPPER(mf.physical_name), 2) AS Drive, SUM(num_of_reads) AS num_of_reads,
	         SUM(io_stall_read_ms) AS io_stall_read_ms, SUM(num_of_writes) AS num_of_writes,
	         SUM(io_stall_write_ms) AS io_stall_write_ms, SUM(num_of_bytes_read) AS num_of_bytes_read,
	         SUM(num_of_bytes_written) AS num_of_bytes_written, SUM(io_stall) AS io_stall, vs.volume_mount_point 
      FROM sys.dm_io_virtual_file_stats(NULL, NULL) AS vfs
      INNER JOIN sys.master_files AS mf WITH (NOLOCK)
      ON vfs.database_id = mf.database_id AND vfs.file_id = mf.file_id
	  CROSS APPLY sys.dm_os_volume_stats(mf.database_id, mf.[file_id]) AS vs 
      GROUP BY LEFT(UPPER(mf.physical_name), 2), vs.volume_mount_point) AS tab
ORDER BY [Overall Latency] OPTION (RECOMPILE);
------

-- Shows you the drive-level latency for reads and writes, in milliseconds
-- Latency above 30-40ms is usually a problem
-- These latency numbers include all file activity against all SQL Server 
-- database files on each drive since SQL Server was last started


-- Calculates average stalls per read, per write, and per total input/output for each database file  (Query 32) (IO Latency by File)
SELECT DB_NAME(fs.database_id) AS [Database Name], CAST(fs.io_stall_read_ms/(1.0 + fs.num_of_reads) AS NUMERIC(10,1)) AS [avg_read_latency_ms],
CAST(fs.io_stall_write_ms/(1.0 + fs.num_of_writes) AS NUMERIC(10,1)) AS [avg_write_latency_ms],
CAST((fs.io_stall_read_ms + fs.io_stall_write_ms)/(1.0 + fs.num_of_reads + fs.num_of_writes) AS NUMERIC(10,1)) AS [avg_io_latency_ms],
CONVERT(DECIMAL(18,2), mf.size/128.0) AS [File Size (MB)], mf.physical_name, mf.type_desc, fs.io_stall_read_ms, fs.num_of_reads, 
fs.io_stall_write_ms, fs.num_of_writes, fs.io_stall_read_ms + fs.io_stall_write_ms AS [io_stalls], fs.num_of_reads + fs.num_of_writes AS [total_io],
io_stall_queued_read_ms AS [Resource Governor Total Read IO Latency (ms)], io_stall_queued_write_ms AS [Resource Governor Total Write IO Latency (ms)] 
FROM sys.dm_io_virtual_file_stats(null,null) AS fs
INNER JOIN sys.master_files AS mf WITH (NOLOCK)
ON fs.database_id = mf.database_id
AND fs.[file_id] = mf.[file_id]
ORDER BY avg_io_latency_ms DESC OPTION (RECOMPILE);
------

-- Helps determine which database files on the entire instance have the most I/O bottlenecks
-- This can help you decide whether certain LUNs are overloaded and whether you might
-- want to move some files to a different location or perhaps improve your I/O performance
-- These latency numbers include all file activity against each SQL Server 
-- database file since SQL Server was last started


-- Look for I/O requests taking longer than 15 seconds in the six most recent SQL Server Error Logs (Query 33) (IO Warnings)
CREATE TABLE #IOWarningResults(LogDate datetime, ProcessInfo sysname, LogText nvarchar(1000));

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 0, 1, N'taking longer than 15 seconds';

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 1, 1, N'taking longer than 15 seconds';

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 2, 1, N'taking longer than 15 seconds';

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 3, 1, N'taking longer than 15 seconds';

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 4, 1, N'taking longer than 15 seconds';

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 5, 1, N'taking longer than 15 seconds';

SELECT LogDate, ProcessInfo, LogText
FROM #IOWarningResults
ORDER BY LogDate DESC;

DROP TABLE #IOWarningResults;
------  

-- Finding 15 second I/O warnings in the SQL Server Error Log is useful evidence of
-- poor I/O performance (which might have many different causes)
-- Look to see if you see any patterns in the results (same files, same drives, same time of day, etc.)

-- Diagnostics in SQL Server help detect stalled and stuck I/O operations
-- https://bit.ly/2qtaw73


-- Resource Governor Resource Pool information (Query 34) (RG Resource Pools)
SELECT pool_id, [Name], statistics_start_time,
       min_memory_percent, max_memory_percent,  
       max_memory_kb/1024 AS [max_memory_mb],  
       used_memory_kb/1024 AS [used_memory_mb],   
       target_memory_kb/1024 AS [target_memory_mb],
	   min_iops_per_volume, max_iops_per_volume
FROM sys.dm_resource_governor_resource_pools WITH (NOLOCK)
OPTION (RECOMPILE);
------

-- sys.dm_resource_governor_resource_pools (Transact-SQL)
-- https://bit.ly/2MVU0Vy



-- Recovery model, log reuse wait description, log file size, log usage size  (Query 35) (Database Properties)
-- and compatibility level for all databases on instance
SELECT db.[name] AS [Database Name], SUSER_SNAME(db.owner_sid) AS [Database Owner], db.recovery_model_desc AS [Recovery Model], 
db.state_desc, db.containment_desc, db.log_reuse_wait_desc AS [Log Reuse Wait Description], 
CONVERT(DECIMAL(18,2), ls.cntr_value/1024.0) AS [Log Size (MB)], CONVERT(DECIMAL(18,2), lu.cntr_value/1024.0) AS [Log Used (MB)],
CAST(CAST(lu.cntr_value AS FLOAT) / CAST(ls.cntr_value AS FLOAT)AS DECIMAL(18,2)) * 100 AS [Log Used %], 
db.[compatibility_level] AS [DB Compatibility Level], 
db.is_mixed_page_allocation_on, db.page_verify_option_desc AS [Page Verify Option], 
db.is_auto_create_stats_on, db.is_auto_update_stats_on, db.is_auto_update_stats_async_on, db.is_parameterization_forced, 
db.snapshot_isolation_state_desc, db.is_read_committed_snapshot_on, db.is_auto_close_on, db.is_auto_shrink_on, 
db.target_recovery_time_in_seconds, db.is_cdc_enabled, db.is_published, db.is_distributor,
db.group_database_id, db.replica_id,db.is_memory_optimized_elevate_to_snapshot_on, 
db.delayed_durability_desc, db.is_auto_create_stats_incremental_on,
db.is_query_store_on, db.is_sync_with_backup, db.is_temporal_history_retention_enabled,
db.is_supplemental_logging_enabled, db.is_remote_data_archive_enabled,
db.is_encrypted, de.encryption_state, de.percent_complete, de.key_algorithm, de.key_length, db.resource_pool_id      
FROM sys.databases AS db WITH (NOLOCK)
INNER JOIN sys.dm_os_performance_counters AS lu WITH (NOLOCK)
ON db.name = lu.instance_name
INNER JOIN sys.dm_os_performance_counters AS ls WITH (NOLOCK)
ON db.name = ls.instance_name
LEFT OUTER JOIN sys.dm_database_encryption_keys AS de WITH (NOLOCK)
ON db.database_id = de.database_id
WHERE lu.counter_name LIKE N'Log File(s) Used Size (KB)%' 
AND ls.counter_name LIKE N'Log File(s) Size (KB)%'
AND ls.cntr_value > 0 
ORDER BY db.[name] OPTION (RECOMPILE);
------

-- Things to look at:
-- How many databases are on the instance?
-- What recovery models are they using?
-- What is the log reuse wait description?
-- How full are the transaction logs?
-- What compatibility level are the databases on? 
-- What is the Page Verify Option? (should be CHECKSUM)
-- Is Auto Update Statistics Asynchronously enabled?
-- Is Delayed Durability enabled
-- Make sure auto_shrink and auto_close are not enabled!

-- is_mixed_page_allocation_on is a new property for SQL Server 2016. Equivalent to TF 1118 for a user database
-- SQL Server 2016: Changes in default behavior for autogrow and allocations for tempdb and user databases
-- https://bit.ly/2evRZSR

-- A non-zero value for target_recovery_time_in_seconds means that indirect checkpoint is enabled 
-- If the setting has a zero value it indicates that automatic checkpoint is enabled

-- Changes in SQL Server 2016 Checkpoint Behavior
-- https://bit.ly/2pdggk3


-- Missing Indexes for all databases by Index Advantage  (Query 36) (Missing Indexes All Databases)
SELECT CONVERT(decimal(18,2), user_seeks * avg_total_user_cost * (avg_user_impact * 0.01)) AS [index_advantage],
FORMAT(migs.last_user_seek, 'yyyy-MM-dd HH:mm:ss') AS [last_user_seek], 
mid.[statement] AS [Database.Schema.Table],
COUNT(1) OVER(PARTITION BY mid.[statement]) AS [missing_indexes_for_table],
COUNT(1) OVER(PARTITION BY mid.[statement], equality_columns) AS [similar_missing_indexes_for_table],
mid.equality_columns, mid.inequality_columns, mid.included_columns,
migs.unique_compiles, migs.user_seeks, 
CONVERT(decimal(18,2), migs.avg_total_user_cost) AS [avg_total_user_cost], migs.avg_user_impact 
FROM sys.dm_db_missing_index_group_stats AS migs WITH (NOLOCK)
INNER JOIN sys.dm_db_missing_index_groups AS mig WITH (NOLOCK)
ON migs.group_handle = mig.index_group_handle
INNER JOIN sys.dm_db_missing_index_details AS mid WITH (NOLOCK)
ON mig.index_handle = mid.index_handle
ORDER BY index_advantage DESC OPTION (RECOMPILE);
------

-- Getting missing index information for all of the databases on the instance is very useful
-- Look at last user seek time, number of user seeks to help determine source and importance
-- Also look at avg_user_impact and avg_total_user_cost to help determine importance
-- SQL Server is overly eager to add included columns, so beware
-- Do not just blindly add indexes that show up from this query!!!

-- SQL Server Index Design Guide
-- https://bit.ly/2qtZr4N



-- Get VLF Counts for all databases on the instance (Query 37) (VLF Counts)
SELECT [name] AS [Database Name], [VLF Count]
FROM sys.databases AS db WITH (NOLOCK)
CROSS APPLY (SELECT file_id, COUNT(*) AS [VLF Count]
		     FROM sys.dm_db_log_info(db.database_id)
			 GROUP BY file_id) AS li
ORDER BY [VLF Count] DESC OPTION (RECOMPILE);
------

-- High VLF counts can affect write performance to the log file
-- and they can make full database restores and crash recovery take much longer
-- Try to keep your VLF counts under 200 in most cases (depending on log file size)

-- Important change to VLF creation algorithm in SQL Server 2014
-- https://bit.ly/2Hsjbg4

-- SQL Server Transaction Log Architecture and Management Guide
-- https://bit.ly/2JjmQRZ



-- Get CPU utilization by database (Query 38) (CPU Usage by Database)
WITH DB_CPU_Stats
AS
(SELECT pa.DatabaseID, DB_Name(pa.DatabaseID) AS [Database Name], SUM(qs.total_worker_time/1000) AS [CPU_Time_Ms]
 FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
 CROSS APPLY (SELECT CONVERT(int, value) AS [DatabaseID] 
              FROM sys.dm_exec_plan_attributes(qs.plan_handle)
              WHERE attribute = N'dbid') AS pa
 GROUP BY DatabaseID)
SELECT ROW_NUMBER() OVER(ORDER BY [CPU_Time_Ms] DESC) AS [CPU Rank],
       [Database Name], [CPU_Time_Ms] AS [CPU Time (ms)], 
       CAST([CPU_Time_Ms] * 1.0 / SUM([CPU_Time_Ms]) OVER() * 100.0 AS DECIMAL(5, 2)) AS [CPU Percent]
FROM DB_CPU_Stats
WHERE DatabaseID <> 32767 -- ResourceDB
ORDER BY [CPU Rank] OPTION (RECOMPILE);
------

-- Helps determine which database is using the most CPU resources on the instance


-- Get I/O utilization by database (Query 39) (IO Usage By Database)
WITH Aggregate_IO_Statistics
AS (SELECT DB_NAME(database_id) AS [Database Name],
    CAST(SUM(num_of_bytes_read + num_of_bytes_written) / 1048576 AS DECIMAL(12, 2)) AS [ioTotalMB],
    CAST(SUM(num_of_bytes_read ) / 1048576 AS DECIMAL(12, 2)) AS [ioReadMB],
    CAST(SUM(num_of_bytes_written) / 1048576 AS DECIMAL(12, 2)) AS [ioWriteMB]
    FROM sys.dm_io_virtual_file_stats(NULL, NULL) AS [DM_IO_STATS]
    GROUP BY database_id)
SELECT ROW_NUMBER() OVER (ORDER BY ioTotalMB DESC) AS [I/O Rank],
        [Database Name], ioTotalMB AS [Total I/O (MB)],
        CAST(ioTotalMB / SUM(ioTotalMB) OVER () * 100.0 AS DECIMAL(5, 2)) AS [Total I/O %],
        ioReadMB AS [Read I/O (MB)], 
		CAST(ioReadMB / SUM(ioReadMB) OVER () * 100.0 AS DECIMAL(5, 2)) AS [Read I/O %],
        ioWriteMB AS [Write I/O (MB)], 
		CAST(ioWriteMB / SUM(ioWriteMB) OVER () * 100.0 AS DECIMAL(5, 2)) AS [Write I/O %]
FROM Aggregate_IO_Statistics
ORDER BY [I/O Rank] OPTION (RECOMPILE);
------

-- Helps determine which database is using the most I/O resources on the instance
-- These numbers are cumulative since the last service restart
-- They include all I/O activity, not just the nominal I/O workload


-- Get total buffer usage by database for current instance  (Query 40) (Total Buffer Usage by Database)
-- This make take some time to run on a busy instance
WITH AggregateBufferPoolUsage
AS
(SELECT DB_NAME(database_id) AS [Database Name],
CAST(COUNT(*) * 8/1024.0 AS DECIMAL (10,2))  AS [CachedSize]
FROM sys.dm_os_buffer_descriptors WITH (NOLOCK)
WHERE database_id <> 32767 -- ResourceDB
GROUP BY DB_NAME(database_id))
SELECT ROW_NUMBER() OVER(ORDER BY CachedSize DESC) AS [Buffer Pool Rank], [Database Name], CachedSize AS [Cached Size (MB)],
       CAST(CachedSize / SUM(CachedSize) OVER() * 100.0 AS DECIMAL(5,2)) AS [Buffer Pool Percent]
FROM AggregateBufferPoolUsage
ORDER BY [Buffer Pool Rank] OPTION (RECOMPILE);
------

-- Tells you how much memory (in the buffer pool) 
-- is being used by each database on the instance


-- Get tempdb version store space usage by database (Query 41) (Version Store Space Usage)
SELECT DB_NAME(database_id) AS [Database Name],
       reserved_page_count AS [Version Store Reserved Page Count], 
	   reserved_space_kb/1024 AS [Version Store Reserved Space (MB)] 
FROM sys.dm_tran_version_store_space_usage WITH (NOLOCK) 
ORDER BY reserved_space_kb/1024 DESC OPTION (RECOMPILE);
------  

-- sys.dm_tran_version_store_space_usage (Transact-SQL)
-- https://bit.ly/2vh3Bmk




-- Clear Wait Stats with this command
-- DBCC SQLPERF('sys.dm_os_wait_stats', CLEAR);

-- Isolate top waits for server instance since last restart or wait statistics clear  (Query 42) (Top Waits)
WITH [Waits] 
AS (SELECT wait_type, wait_time_ms/ 1000.0 AS [WaitS],
          (wait_time_ms - signal_wait_time_ms) / 1000.0 AS [ResourceS],
           signal_wait_time_ms / 1000.0 AS [SignalS],
           waiting_tasks_count AS [WaitCount],
           100.0 *  wait_time_ms / SUM (wait_time_ms) OVER() AS [Percentage],
           ROW_NUMBER() OVER(ORDER BY wait_time_ms DESC) AS [RowNum]
    FROM sys.dm_os_wait_stats WITH (NOLOCK)
    WHERE [wait_type] NOT IN (
        N'BROKER_EVENTHANDLER', N'BROKER_RECEIVE_WAITFOR', N'BROKER_TASK_STOP',
		N'BROKER_TO_FLUSH', N'BROKER_TRANSMITTER', N'CHECKPOINT_QUEUE',
        N'CHKPT', N'CLR_AUTO_EVENT', N'CLR_MANUAL_EVENT', N'CLR_SEMAPHORE', N'CXCONSUMER',
        N'DBMIRROR_DBM_EVENT', N'DBMIRROR_EVENTS_QUEUE', N'DBMIRROR_WORKER_QUEUE',
		N'DBMIRRORING_CMD', N'DIRTY_PAGE_POLL', N'DISPATCHER_QUEUE_SEMAPHORE',
        N'EXECSYNC', N'FSAGENT', N'FT_IFTS_SCHEDULER_IDLE_WAIT', N'FT_IFTSHC_MUTEX',
        N'HADR_CLUSAPI_CALL', N'HADR_FILESTREAM_IOMGR_IOCOMPLETION', N'HADR_LOGCAPTURE_WAIT', 
		N'HADR_NOTIFICATION_DEQUEUE', N'HADR_TIMER_TASK', N'HADR_WORK_QUEUE',
        N'KSOURCE_WAKEUP', N'LAZYWRITER_SLEEP', N'LOGMGR_QUEUE', 
		N'MEMORY_ALLOCATION_EXT', N'ONDEMAND_TASK_QUEUE',
		N'PARALLEL_REDO_DRAIN_WORKER', N'PARALLEL_REDO_LOG_CACHE', N'PARALLEL_REDO_TRAN_LIST',
		N'PARALLEL_REDO_WORKER_SYNC', N'PARALLEL_REDO_WORKER_WAIT_WORK',
		N'PREEMPTIVE_HADR_LEASE_MECHANISM', N'PREEMPTIVE_SP_SERVER_DIAGNOSTICS',
		N'PREEMPTIVE_OS_LIBRARYOPS', N'PREEMPTIVE_OS_COMOPS', N'PREEMPTIVE_OS_CRYPTOPS',
		N'PREEMPTIVE_OS_PIPEOPS', N'PREEMPTIVE_OS_AUTHENTICATIONOPS',
		N'PREEMPTIVE_OS_GENERICOPS', N'PREEMPTIVE_OS_VERIFYTRUST',
		N'PREEMPTIVE_OS_FILEOPS', N'PREEMPTIVE_OS_DEVICEOPS', N'PREEMPTIVE_OS_QUERYREGISTRY',
		N'PREEMPTIVE_OS_WRITEFILE',
		N'PREEMPTIVE_XE_CALLBACKEXECUTE', N'PREEMPTIVE_XE_DISPATCHER',
		N'PREEMPTIVE_XE_GETTARGETSTATE', N'PREEMPTIVE_XE_SESSIONCOMMIT',
		N'PREEMPTIVE_XE_TARGETINIT', N'PREEMPTIVE_XE_TARGETFINALIZE',
        N'PWAIT_ALL_COMPONENTS_INITIALIZED', N'PWAIT_DIRECTLOGCONSUMER_GETNEXT',
		N'QDS_PERSIST_TASK_MAIN_LOOP_SLEEP',
		N'QDS_ASYNC_QUEUE',
        N'QDS_CLEANUP_STALE_QUERIES_TASK_MAIN_LOOP_SLEEP', N'REQUEST_FOR_DEADLOCK_SEARCH',
		N'RESOURCE_QUEUE', N'SERVER_IDLE_CHECK', N'SLEEP_BPOOL_FLUSH', N'SLEEP_DBSTARTUP',
		N'SLEEP_DCOMSTARTUP', N'SLEEP_MASTERDBREADY', N'SLEEP_MASTERMDREADY',
        N'SLEEP_MASTERUPGRADED', N'SLEEP_MSDBSTARTUP', N'SLEEP_SYSTEMTASK', N'SLEEP_TASK',
        N'SLEEP_TEMPDBSTARTUP', N'SNI_HTTP_ACCEPT', N'SP_SERVER_DIAGNOSTICS_SLEEP',
		N'SQLTRACE_BUFFER_FLUSH', N'SQLTRACE_INCREMENTAL_FLUSH_SLEEP', N'SQLTRACE_WAIT_ENTRIES',
		N'WAIT_FOR_RESULTS', N'WAITFOR', N'WAITFOR_TASKSHUTDOWN', N'WAIT_XTP_HOST_WAIT',
		N'WAIT_XTP_OFFLINE_CKPT_NEW_LOG', N'WAIT_XTP_CKPT_CLOSE', N'WAIT_XTP_RECOVERY',
		N'XE_BUFFERMGR_ALLPROCESSED_EVENT', N'XE_DISPATCHER_JOIN',
        N'XE_DISPATCHER_WAIT', N'XE_LIVE_TARGET_TVF', N'XE_TIMER_EVENT')
    AND waiting_tasks_count > 0)
SELECT
    MAX (W1.wait_type) AS [WaitType],
	CAST (MAX (W1.Percentage) AS DECIMAL (5,2)) AS [Wait Percentage],
	CAST ((MAX (W1.WaitS) / MAX (W1.WaitCount)) AS DECIMAL (16,4)) AS [AvgWait_Sec],
    CAST ((MAX (W1.ResourceS) / MAX (W1.WaitCount)) AS DECIMAL (16,4)) AS [AvgRes_Sec],
    CAST ((MAX (W1.SignalS) / MAX (W1.WaitCount)) AS DECIMAL (16,4)) AS [AvgSig_Sec], 
    CAST (MAX (W1.WaitS) AS DECIMAL (16,2)) AS [Wait_Sec],
    CAST (MAX (W1.ResourceS) AS DECIMAL (16,2)) AS [Resource_Sec],
    CAST (MAX (W1.SignalS) AS DECIMAL (16,2)) AS [Signal_Sec],
    MAX (W1.WaitCount) AS [Wait Count],
	CAST (N'https://www.sqlskills.com/help/waits/' + W1.wait_type AS XML) AS [Help/Info URL]
FROM Waits AS W1
INNER JOIN Waits AS W2
ON W2.RowNum <= W1.RowNum
GROUP BY W1.RowNum, W1.wait_type
HAVING SUM (W2.Percentage) - MAX (W1.Percentage) < 99 -- percentage threshold
OPTION (RECOMPILE);
------

-- Cumulative wait stats are not as useful on an idle instance that is not under load or performance pressure

-- SQL Server Wait Types Library (Paul Randal)
-- https://bit.ly/2ePzYO2

-- The SQL Server Wait Type Repository
-- https://bit.ly/1afzfjC

-- Wait statistics, or please tell me where it hurts
-- https://bit.ly/2wsQHQE

-- SQL Server 2005 Performance Tuning using the Waits and Queues
-- https://bit.ly/1o2NFoF

-- sys.dm_os_wait_stats (Transact-SQL)
-- https://bit.ly/2Hjq9Yl



-- Get a count of SQL connections by IP address (Query 43) (Connection Counts by IP Address)
SELECT ec.client_net_address, es.[program_name], es.[host_name], es.login_name, 
COUNT(ec.session_id) AS [connection count] 
FROM sys.dm_exec_sessions AS es WITH (NOLOCK) 
INNER JOIN sys.dm_exec_connections AS ec WITH (NOLOCK) 
ON es.session_id = ec.session_id 
GROUP BY ec.client_net_address, es.[program_name], es.[host_name], es.login_name  
ORDER BY ec.client_net_address, es.[program_name] OPTION (RECOMPILE);
------

-- This helps you figure where your database load is coming from
-- and verifies connectivity from other machines

-- Solving Connectivity errors to SQL Server
-- https://bit.ly/2EgzoD0



-- Get Average Task Counts (run multiple times)  (Query 44) (Avg Task Counts)
SELECT AVG(current_tasks_count) AS [Avg Task Count], 
AVG(work_queue_count) AS [Avg Work Queue Count],
AVG(runnable_tasks_count) AS [Avg Runnable Task Count],
AVG(pending_disk_io_count) AS [Avg Pending DiskIO Count]
FROM sys.dm_os_schedulers WITH (NOLOCK)
WHERE scheduler_id < 255 OPTION (RECOMPILE);
------

-- Sustained values above 10 suggest further investigation in that area
-- High Avg Task Counts are often caused by blocking/deadlocking or other resource contention

-- Sustained values above 1 suggest further investigation in that area
-- High Avg Runnable Task Counts are a good sign of CPU pressure
-- High Avg Pending DiskIO Counts are a sign of disk pressure

-- How to Do Some Very Basic SQL Server Monitoring
-- https://bit.ly/2q3Btgt



-- Detect blocking (run multiple times)  (Query 45) (Detect Blocking)
SELECT t1.resource_type AS [lock type], DB_NAME(resource_database_id) AS [database],
t1.resource_associated_entity_id AS [blk object],t1.request_mode AS [lock req],  -- lock requested
t1.request_session_id AS [waiter sid], t2.wait_duration_ms AS [wait time],       -- spid of waiter  
(SELECT [text] FROM sys.dm_exec_requests AS r WITH (NOLOCK)                      -- get sql for waiter
CROSS APPLY sys.dm_exec_sql_text(r.[sql_handle]) 
WHERE r.session_id = t1.request_session_id) AS [waiter_batch],
(SELECT SUBSTRING(qt.[text],r.statement_start_offset/2, 
    (CASE WHEN r.statement_end_offset = -1 
    THEN LEN(CONVERT(nvarchar(max), qt.[text])) * 2 
    ELSE r.statement_end_offset END - r.statement_start_offset)/2) 
FROM sys.dm_exec_requests AS r WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(r.[sql_handle]) AS qt
WHERE r.session_id = t1.request_session_id) AS [waiter_stmt],					-- statement blocked
t2.blocking_session_id AS [blocker sid],										-- spid of blocker
(SELECT [text] FROM sys.sysprocesses AS p										-- get sql for blocker
CROSS APPLY sys.dm_exec_sql_text(p.[sql_handle]) 
WHERE p.spid = t2.blocking_session_id) AS [blocker_batch]
FROM sys.dm_tran_locks AS t1 WITH (NOLOCK)
INNER JOIN sys.dm_os_waiting_tasks AS t2 WITH (NOLOCK)
ON t1.lock_owner_address = t2.resource_address OPTION (RECOMPILE);
------

-- Helps troubleshoot blocking and deadlocking issues
-- The results will change from second to second on a busy system
-- You should run this query multiple times when you see signs of blocking



-- Get CPU Utilization History for last 256 minutes (in one minute intervals)  (Query 46) (CPU Utilization History)
DECLARE @ts_now bigint = (SELECT cpu_ticks/(cpu_ticks/ms_ticks) FROM sys.dm_os_sys_info WITH (NOLOCK)); 

SELECT TOP(256) SQLProcessUtilization AS [SQL Server Process CPU Utilization], 
               SystemIdle AS [System Idle Process], 
               100 - SystemIdle - SQLProcessUtilization AS [Other Process CPU Utilization], 
               DATEADD(ms, -1 * (@ts_now - [timestamp]), GETDATE()) AS [Event Time] 
FROM (SELECT record.value('(./Record/@id)[1]', 'int') AS record_id, 
			record.value('(./Record/SchedulerMonitorEvent/SystemHealth/SystemIdle)[1]', 'int') 
			AS [SystemIdle], 
			record.value('(./Record/SchedulerMonitorEvent/SystemHealth/ProcessUtilization)[1]', 'int') 
			AS [SQLProcessUtilization], [timestamp] 
	  FROM (SELECT [timestamp], CONVERT(xml, record) AS [record] 
			FROM sys.dm_os_ring_buffers WITH (NOLOCK)
			WHERE ring_buffer_type = N'RING_BUFFER_SCHEDULER_MONITOR' 
			AND record LIKE N'%<SystemHealth>%') AS x) AS y 
ORDER BY record_id DESC OPTION (RECOMPILE);
------

-- Look at the trend over the entire period 
-- Also look at high sustained 'Other Process' CPU Utilization values
-- Note: This query sometimes gives inaccurate results (negative values)
-- on high core count (> 64 cores) systems


-- Get top total worker time queries for entire instance (Query 47) (Top Worker Time Queries)
SELECT TOP(50) DB_NAME(t.[dbid]) AS [Database Name], 
REPLACE(REPLACE(LEFT(t.[text], 255), CHAR(10),''), CHAR(13),'') AS [Short Query Text],  
qs.total_worker_time AS [Total Worker Time], qs.min_worker_time AS [Min Worker Time],
qs.total_worker_time/qs.execution_count AS [Avg Worker Time], 
qs.max_worker_time AS [Max Worker Time], 
qs.min_elapsed_time AS [Min Elapsed Time], 
qs.total_elapsed_time/qs.execution_count AS [Avg Elapsed Time], 
qs.max_elapsed_time AS [Max Elapsed Time],
qs.min_logical_reads AS [Min Logical Reads],
qs.total_logical_reads/qs.execution_count AS [Avg Logical Reads],
qs.max_logical_reads AS [Max Logical Reads], 
qs.execution_count AS [Execution Count],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index], 
qs.creation_time AS [Creation Time]
--,t.[text] AS [Query Text], qp.query_plan AS [Query Plan] -- uncomment out these columns if not copying results to Excel
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(plan_handle) AS t 
CROSS APPLY sys.dm_exec_query_plan(plan_handle) AS qp 
ORDER BY qs.total_worker_time DESC OPTION (RECOMPILE);
------


-- Helps you find the most expensive queries from a CPU perspective across the entire instance
-- Can also help track down parameter sniffing issues



-- Page Life Expectancy (PLE) value for each NUMA node in current instance  (Query 48) (PLE by NUMA Node)
SELECT @@SERVERNAME AS [Server Name], RTRIM([object_name]) AS [Object Name], instance_name, cntr_value AS [Page Life Expectancy]
FROM sys.dm_os_performance_counters WITH (NOLOCK)
WHERE [object_name] LIKE N'%Buffer Node%' -- Handles named instances
AND counter_name = N'Page life expectancy' OPTION (RECOMPILE);
------

-- PLE is a good measurement of internal memory pressure
-- Higher PLE is better. Watch the trend over time, not the absolute value
-- This will only return one row for non-NUMA systems

-- Page Life Expectancy isn�t what you think�
-- https://bit.ly/2EgynLa


-- Memory Grants Pending value for current instance  (Query 49) (Memory Grants Pending)
SELECT @@SERVERNAME AS [Server Name], RTRIM([object_name]) AS [Object Name], cntr_value AS [Memory Grants Pending]                                                                                                       
FROM sys.dm_os_performance_counters WITH (NOLOCK)
WHERE [object_name] LIKE N'%Memory Manager%' -- Handles named instances
AND counter_name = N'Memory Grants Pending' OPTION (RECOMPILE);
------

-- Run multiple times, and run periodically if you suspect you are under memory pressure
-- Memory Grants Pending above zero for a sustained period is a very strong indicator of internal memory pressure


-- Memory Clerk Usage for instance  (Query 50) (Memory Clerk Usage)
-- Look for high value for CACHESTORE_SQLCP (Ad-hoc query plans)
SELECT TOP(10) mc.[type] AS [Memory Clerk Type], 
       CAST((SUM(mc.pages_kb)/1024.0) AS DECIMAL (15,2)) AS [Memory Usage (MB)] 
FROM sys.dm_os_memory_clerks AS mc WITH (NOLOCK)
GROUP BY mc.[type]  
ORDER BY SUM(mc.pages_kb) DESC OPTION (RECOMPILE);
------

-- MEMORYCLERK_SQLBUFFERPOOL was new for SQL Server 2012. It should be your highest consumer of memory

-- CACHESTORE_SQLCP  SQL Plans         
-- These are cached SQL statements or batches that aren't in stored procedures, functions and triggers
-- Watch out for high values for CACHESTORE_SQLCP
-- Enabling 'optimize for ad hoc workloads' at the instance level can help reduce this
-- Running DBCC FREESYSTEMCACHE ('SQL Plans') periodically may be required to better control this

-- CACHESTORE_OBJCP  Object Plans      
-- These are compiled plans for stored procedures, functions and triggers

-- sys.dm_os_memory_clerks (Transact-SQL)
-- https://bit.ly/2H31xDR



-- Find single-use, ad-hoc and prepared queries that are bloating the plan cache  (Query 51) (Ad hoc Queries)
SELECT TOP(50) DB_NAME(t.[dbid]) AS [Database Name], t.[text] AS [Query Text], 
cp.objtype AS [Object Type], cp.cacheobjtype AS [Cache Object Type],  
cp.size_in_bytes/1024 AS [Plan Size in KB]
FROM sys.dm_exec_cached_plans AS cp WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(plan_handle) AS t
WHERE cp.cacheobjtype = N'Compiled Plan' 
AND cp.objtype IN (N'Adhoc', N'Prepared') 
AND cp.usecounts = 1
ORDER BY cp.size_in_bytes DESC, DB_NAME(t.[dbid]) OPTION (RECOMPILE);
------

-- Gives you the text, type and size of single-use ad-hoc and prepared queries that waste space in the plan cache
-- Enabling 'optimize for ad hoc workloads' for the instance can help (SQL Server 2008 and above only)
-- Running DBCC FREESYSTEMCACHE ('SQL Plans') periodically may be required to better control this
-- Enabling forced parameterization for the database can help, but test first!

-- Plan cache, adhoc workloads and clearing the single-use plan cache bloat
-- https://bit.ly/2EfYOkl


-- Get top total logical reads queries for entire instance (Query 52) (Top Logical Reads Queries)
SELECT TOP(50) DB_NAME(t.[dbid]) AS [Database Name],
REPLACE(REPLACE(LEFT(t.[text], 255), CHAR(10),''), CHAR(13),'') AS [Short Query Text], 
qs.total_logical_reads AS [Total Logical Reads],
qs.min_logical_reads AS [Min Logical Reads],
qs.total_logical_reads/qs.execution_count AS [Avg Logical Reads],
qs.max_logical_reads AS [Max Logical Reads],   
qs.min_worker_time AS [Min Worker Time],
qs.total_worker_time/qs.execution_count AS [Avg Worker Time], 
qs.max_worker_time AS [Max Worker Time], 
qs.min_elapsed_time AS [Min Elapsed Time], 
qs.total_elapsed_time/qs.execution_count AS [Avg Elapsed Time], 
qs.max_elapsed_time AS [Max Elapsed Time],
qs.execution_count AS [Execution Count], 
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index],
qs.creation_time AS [Creation Time]
--,t.[text] AS [Complete Query Text], qp.query_plan AS [Query Plan] -- uncomment out these columns if not copying results to Excel
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(plan_handle) AS t 
CROSS APPLY sys.dm_exec_query_plan(plan_handle) AS qp 
ORDER BY qs.total_logical_reads DESC OPTION (RECOMPILE);
------


-- Helps you find the most expensive queries from a memory perspective across the entire instance
-- Can also help track down parameter sniffing issues


-- Get top average elapsed time queries for entire instance (Query 53) (Top Avg Elapsed Time Queries)
SELECT TOP(50) DB_NAME(t.[dbid]) AS [Database Name], 
REPLACE(REPLACE(LEFT(t.[text], 255), CHAR(10),''), CHAR(13),'') AS [Short Query Text],  
qs.total_elapsed_time/qs.execution_count AS [Avg Elapsed Time],
qs.min_elapsed_time, qs.max_elapsed_time, qs.last_elapsed_time,
qs.execution_count AS [Execution Count],  
qs.total_logical_reads/qs.execution_count AS [Avg Logical Reads], 
qs.total_physical_reads/qs.execution_count AS [Avg Physical Reads], 
qs.total_worker_time/qs.execution_count AS [Avg Worker Time],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index],
qs.creation_time AS [Creation Time]
--,t.[text] AS [Complete Query Text], qp.query_plan AS [Query Plan] -- uncomment out these columns if not copying results to Excel
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(plan_handle) AS t 
CROSS APPLY sys.dm_exec_query_plan(plan_handle) AS qp 
ORDER BY qs.total_elapsed_time/qs.execution_count DESC OPTION (RECOMPILE);
------

-- Helps you find the highest average elapsed time queries across the entire instance
-- Can also help track down parameter sniffing issues


-- Look at UDF execution statistics (Query 54) (UDF Stats by DB)
SELECT TOP (25) DB_NAME(database_id) AS [Database Name], 
		   OBJECT_NAME(object_id, database_id) AS [Function Name],
		   total_worker_time, execution_count, total_elapsed_time,  
           total_elapsed_time/execution_count AS [avg_elapsed_time],  
           last_elapsed_time, last_execution_time, cached_time, [type_desc] 
FROM sys.dm_exec_function_stats WITH (NOLOCK) 
ORDER BY total_worker_time DESC OPTION (RECOMPILE);
------

-- sys.dm_exec_function_stats (Transact-SQL)
-- https://bit.ly/2q1Q6BM

-- Showplan Enhancements for UDFs
-- https://bit.ly/2LVqiQ1


-- Database specific queries *****************************************************************

-- **** Please switch to a user database that you are interested in! *****
--USE YourDatabaseName; -- make sure to change to an actual database on your instance, not the master system database
--GO

-- Individual File Sizes and space available for current database  (Query 55) (File Sizes and Space)
SELECT f.name AS [File Name] , f.physical_name AS [Physical Name], 
CAST((f.size/128.0) AS DECIMAL(15,2)) AS [Total Size in MB],
CAST(f.size/128.0 - CAST(FILEPROPERTY(f.name, 'SpaceUsed') AS int)/128.0 AS DECIMAL(15,2)) 
AS [Available Space In MB], f.[file_id], fg.name AS [Filegroup Name],
f.is_percent_growth, f.growth, fg.is_default, fg.is_read_only, 
fg.is_autogrow_all_files
FROM sys.database_files AS f WITH (NOLOCK) 
LEFT OUTER JOIN sys.filegroups AS fg WITH (NOLOCK)
ON f.data_space_id = fg.data_space_id
ORDER BY f.[file_id] OPTION (RECOMPILE);
------

-- Look at how large and how full the files are and where they are located
-- Make sure the transaction log is not full!!

-- is_autogrow_all_files was new for SQL Server 2016. Equivalent to TF 1117 for user databases

-- SQL Server 2016: Changes in default behavior for autogrow and allocations for tempdb and user databases
-- https://bit.ly/2evRZSR


-- Log space usage for current database  (Query 56) (Log Space Usage)
SELECT DB_NAME(lsu.database_id) AS [Database Name], db.recovery_model_desc AS [Recovery Model],
		CAST(lsu.total_log_size_in_bytes/1048576.0 AS DECIMAL(10, 2)) AS [Total Log Space (MB)],
		CAST(lsu.used_log_space_in_bytes/1048576.0 AS DECIMAL(10, 2)) AS [Used Log Space (MB)], 
		CAST(lsu.used_log_space_in_percent AS DECIMAL(10, 2)) AS [Used Log Space %],
		CAST(lsu.log_space_in_bytes_since_last_backup/1048576.0 AS DECIMAL(10, 2)) AS [Used Log Space Since Last Backup (MB)],
		db.log_reuse_wait_desc		 
FROM sys.dm_db_log_space_usage AS lsu WITH (NOLOCK)
INNER JOIN sys.databases AS db WITH (NOLOCK)
ON lsu.database_id = db.database_id
OPTION (RECOMPILE);
------

-- Look at log file size and usage, along with the log reuse wait description for the current database

-- sys.dm_db_log_space_usage (Transact-SQL)
-- https://bit.ly/2H4MQw9


-- Status of last VLF for current database  (Query 57) (Last VLF Status)
SELECT TOP(1) DB_NAME(li.database_id) AS [Database Name], li.[file_id],
              li.vlf_size_mb, li.vlf_sequence_number, li.vlf_active, li.vlf_status
FROM sys.dm_db_log_info(DB_ID()) AS li 
ORDER BY vlf_sequence_number DESC OPTION (RECOMPILE);
------

-- Determine whether you will be able to shrink the transaction log file

-- vlf_status Values
-- 0 is inactive 
-- 1 is initialized but unused 
-- 2 is active

-- sys.dm_db_log_info (Transact-SQL)
-- https://bit.ly/2EQUU1v



-- Get database scoped configuration values for current database (Query 58) (Database-scoped Configurations)
SELECT configuration_id, name, [value] AS [value_for_primary], value_for_secondary
FROM sys.database_scoped_configurations WITH (NOLOCK) OPTION (RECOMPILE);
------

-- This lets you see the value of these new properties for the current database

-- Clear plan cache for current database
-- ALTER DATABASE SCOPED CONFIGURATION CLEAR PROCEDURE_CACHE;

-- ALTER DATABASE SCOPED CONFIGURATION (Transact-SQL)
-- https://bit.ly/2sOH7nb


-- I/O Statistics by file for the current database  (Query 59) (IO Stats By File)
SELECT DB_NAME(DB_ID()) AS [Database Name], df.name AS [Logical Name], vfs.[file_id], df.type_desc,
df.physical_name AS [Physical Name], CAST(vfs.size_on_disk_bytes/1048576.0 AS DECIMAL(10, 2)) AS [Size on Disk (MB)],
vfs.num_of_reads, vfs.num_of_writes, vfs.io_stall_read_ms, vfs.io_stall_write_ms,
CAST(100. * vfs.io_stall_read_ms/(vfs.io_stall_read_ms + vfs.io_stall_write_ms) AS DECIMAL(10,1)) AS [IO Stall Reads Pct],
CAST(100. * vfs.io_stall_write_ms/(vfs.io_stall_write_ms + vfs.io_stall_read_ms) AS DECIMAL(10,1)) AS [IO Stall Writes Pct],
(vfs.num_of_reads + vfs.num_of_writes) AS [Writes + Reads], 
CAST(vfs.num_of_bytes_read/1048576.0 AS DECIMAL(10, 2)) AS [MB Read], 
CAST(vfs.num_of_bytes_written/1048576.0 AS DECIMAL(10, 2)) AS [MB Written],
CAST(100. * vfs.num_of_reads/(vfs.num_of_reads + vfs.num_of_writes) AS DECIMAL(10,1)) AS [# Reads Pct],
CAST(100. * vfs.num_of_writes/(vfs.num_of_reads + vfs.num_of_writes) AS DECIMAL(10,1)) AS [# Write Pct],
CAST(100. * vfs.num_of_bytes_read/(vfs.num_of_bytes_read + vfs.num_of_bytes_written) AS DECIMAL(10,1)) AS [Read Bytes Pct],
CAST(100. * vfs.num_of_bytes_written/(vfs.num_of_bytes_read + vfs.num_of_bytes_written) AS DECIMAL(10,1)) AS [Written Bytes Pct]
FROM sys.dm_io_virtual_file_stats(DB_ID(), NULL) AS vfs
INNER JOIN sys.database_files AS df WITH (NOLOCK)
ON vfs.[file_id]= df.[file_id] OPTION (RECOMPILE);
------

-- This helps you characterize your workload better from an I/O perspective for this database
-- It helps you determine whether you has an OLTP or DW/DSS type of workload



-- Get most frequently executed queries for this database (Query 60) (Query Execution Counts)
SELECT TOP(50) LEFT(t.[text], 50) AS [Short Query Text], qs.execution_count AS [Execution Count],
qs.total_logical_reads AS [Total Logical Reads],
qs.total_logical_reads/qs.execution_count AS [Avg Logical Reads],
qs.total_worker_time AS [Total Worker Time],
qs.total_worker_time/qs.execution_count AS [Avg Worker Time], 
qs.total_elapsed_time AS [Total Elapsed Time],
qs.total_elapsed_time/qs.execution_count AS [Avg Elapsed Time],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index], 
qs.creation_time AS [Creation Time]
--,t.[text] AS [Complete Query Text], qp.query_plan AS [Query Plan] -- uncomment out these columns if not copying results to Excel
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(plan_handle) AS t 
CROSS APPLY sys.dm_exec_query_plan(plan_handle) AS qp 
WHERE t.dbid = DB_ID()
ORDER BY qs.execution_count DESC OPTION (RECOMPILE);
------


-- Queries 61 through 66 are the "Bad Man List" for stored procedures

-- Top Cached SPs By Execution Count (Query 61) (SP Execution Counts)
SELECT TOP(100) p.name AS [SP Name], qs.execution_count AS [Execution Count],
ISNULL(qs.execution_count/DATEDIFF(Minute, qs.cached_time, GETDATE()), 0) AS [Calls/Minute],
qs.total_elapsed_time/qs.execution_count AS [Avg Elapsed Time],
qs.total_worker_time/qs.execution_count AS [Avg Worker Time],    
qs.total_logical_reads/qs.execution_count AS [Avg Logical Reads],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index],
FORMAT(qs.last_execution_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Last Execution Time], 
FORMAT(qs.cached_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Plan Cached Time]
-- ,qp.query_plan AS [Query Plan] -- Uncomment if you want the Query Plan
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
CROSS APPLY sys.dm_exec_query_plan(qs.plan_handle) AS qp
WHERE qs.database_id = DB_ID()
AND DATEDIFF(Minute, qs.cached_time, GETDATE()) > 0
ORDER BY qs.execution_count DESC OPTION (RECOMPILE);
------

-- Tells you which cached stored procedures are called the most often
-- This helps you characterize and baseline your workload


-- Top Cached SPs By Avg Elapsed Time (Query 62) (SP Avg Elapsed Time)
SELECT TOP(25) p.name AS [SP Name], qs.min_elapsed_time, qs.total_elapsed_time/qs.execution_count AS [avg_elapsed_time], 
qs.max_elapsed_time, qs.last_elapsed_time, qs.total_elapsed_time, qs.execution_count, 
ISNULL(qs.execution_count/DATEDIFF(Minute, qs.cached_time, GETDATE()), 0) AS [Calls/Minute], 
qs.total_worker_time/qs.execution_count AS [AvgWorkerTime], 
qs.total_worker_time AS [TotalWorkerTime],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index],
FORMAT(qs.last_execution_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Last Execution Time], 
FORMAT(qs.cached_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Plan Cached Time]
-- ,qp.query_plan AS [Query Plan] -- Uncomment if you want the Query Plan
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
CROSS APPLY sys.dm_exec_query_plan(qs.plan_handle) AS qp
WHERE qs.database_id = DB_ID()
AND DATEDIFF(Minute, qs.cached_time, GETDATE()) > 0
ORDER BY avg_elapsed_time DESC OPTION (RECOMPILE);
------

-- This helps you find high average elapsed time cached stored procedures that
-- may be easy to optimize with standard query tuning techniques



-- Top Cached SPs By Total Worker time. Worker time relates to CPU cost  (Query 63) (SP Worker Time)
SELECT TOP(25) p.name AS [SP Name], qs.total_worker_time AS [TotalWorkerTime], 
qs.total_worker_time/qs.execution_count AS [AvgWorkerTime], qs.execution_count, 
ISNULL(qs.execution_count/DATEDIFF(Minute, qs.cached_time, GETDATE()), 0) AS [Calls/Minute],
qs.total_elapsed_time, qs.total_elapsed_time/qs.execution_count AS [avg_elapsed_time],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index],
FORMAT(qs.last_execution_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Last Execution Time], 
FORMAT(qs.cached_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Plan Cached Time]
-- ,qp.query_plan AS [Query Plan] -- Uncomment if you want the Query Plan
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
CROSS APPLY sys.dm_exec_query_plan(qs.plan_handle) AS qp
WHERE qs.database_id = DB_ID()
AND DATEDIFF(Minute, qs.cached_time, GETDATE()) > 0
ORDER BY qs.total_worker_time DESC OPTION (RECOMPILE);
------

-- This helps you find the most expensive cached stored procedures from a CPU perspective
-- You should look at this if you see signs of CPU pressure


-- Top Cached SPs By Total Logical Reads. Logical reads relate to memory pressure  (Query 64) (SP Logical Reads)
SELECT TOP(25) p.name AS [SP Name], qs.total_logical_reads AS [TotalLogicalReads], 
qs.total_logical_reads/qs.execution_count AS [AvgLogicalReads],qs.execution_count, 
ISNULL(qs.execution_count/DATEDIFF(Minute, qs.cached_time, GETDATE()), 0) AS [Calls/Minute], 
qs.total_elapsed_time, qs.total_elapsed_time/qs.execution_count AS [avg_elapsed_time],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index], 
FORMAT(qs.last_execution_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Last Execution Time], 
FORMAT(qs.cached_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Plan Cached Time]
-- ,qp.query_plan AS [Query Plan] -- Uncomment if you want the Query Plan
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
CROSS APPLY sys.dm_exec_query_plan(qs.plan_handle) AS qp
WHERE qs.database_id = DB_ID()
AND DATEDIFF(Minute, qs.cached_time, GETDATE()) > 0
ORDER BY qs.total_logical_reads DESC OPTION (RECOMPILE);
------

-- This helps you find the most expensive cached stored procedures from a memory perspective
-- You should look at this if you see signs of memory pressure


-- Top Cached SPs By Total Physical Reads. Physical reads relate to disk read I/O pressure  (Query 65) (SP Physical Reads)
SELECT TOP(25) p.name AS [SP Name],qs.total_physical_reads AS [TotalPhysicalReads], 
qs.total_physical_reads/qs.execution_count AS [AvgPhysicalReads], qs.execution_count, 
qs.total_logical_reads,qs.total_elapsed_time, qs.total_elapsed_time/qs.execution_count AS [avg_elapsed_time],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index],
FORMAT(qs.last_execution_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Last Execution Time], 
FORMAT(qs.cached_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Plan Cached Time]
-- ,qp.query_plan AS [Query Plan] -- Uncomment if you want the Query Plan 
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
CROSS APPLY sys.dm_exec_query_plan(qs.plan_handle) AS qp
WHERE qs.database_id = DB_ID()
AND qs.total_physical_reads > 0
ORDER BY qs.total_physical_reads DESC, qs.total_logical_reads DESC OPTION (RECOMPILE);
------

-- This helps you find the most expensive cached stored procedures from a read I/O perspective
-- You should look at this if you see signs of I/O pressure or of memory pressure
       


-- Top Cached SPs By Total Logical Writes (Query 66) (SP Logical Writes)
-- Logical writes relate to both memory and disk I/O pressure 
SELECT TOP(25) p.name AS [SP Name], qs.total_logical_writes AS [TotalLogicalWrites], 
qs.total_logical_writes/qs.execution_count AS [AvgLogicalWrites], qs.execution_count,
ISNULL(qs.execution_count/DATEDIFF(Minute, qs.cached_time, GETDATE()), 0) AS [Calls/Minute],
qs.total_elapsed_time, qs.total_elapsed_time/qs.execution_count AS [avg_elapsed_time],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index], 
FORMAT(qs.last_execution_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Last Execution Time], 
FORMAT(qs.cached_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Plan Cached Time]
-- ,qp.query_plan AS [Query Plan] -- Uncomment if you want the Query Plan 
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
CROSS APPLY sys.dm_exec_query_plan(qs.plan_handle) AS qp
WHERE qs.database_id = DB_ID()
AND qs.total_logical_writes > 0
AND DATEDIFF(Minute, qs.cached_time, GETDATE()) > 0
ORDER BY qs.total_logical_writes DESC OPTION (RECOMPILE);
------

-- This helps you find the most expensive cached stored procedures from a write I/O perspective
-- You should look at this if you see signs of I/O pressure or of memory pressure


-- Lists the top statements by average input/output usage for the current database  (Query 67) (Top IO Statements)
SELECT TOP(50) OBJECT_NAME(qt.objectid, dbid) AS [SP Name],
(qs.total_logical_reads + qs.total_logical_writes) /qs.execution_count AS [Avg IO], qs.execution_count AS [Execution Count],
SUBSTRING(qt.[text],qs.statement_start_offset/2, 
	(CASE 
		WHEN qs.statement_end_offset = -1 
	 THEN LEN(CONVERT(nvarchar(max), qt.[text])) * 2 
		ELSE qs.statement_end_offset 
	 END - qs.statement_start_offset)/2) AS [Query Text]	
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(qs.sql_handle) AS qt
WHERE qt.[dbid] = DB_ID()
ORDER BY [Avg IO] DESC OPTION (RECOMPILE);
------

-- Helps you find the most expensive statements for I/O by SP



-- Possible Bad NC Indexes (writes > reads)  (Query 68) (Bad NC Indexes)
SELECT OBJECT_NAME(s.[object_id]) AS [Table Name], i.name AS [Index Name], i.index_id, 
i.is_disabled, i.is_hypothetical, i.has_filter, i.fill_factor,
s.user_updates AS [Total Writes], s.user_seeks + s.user_scans + s.user_lookups AS [Total Reads],
s.user_updates - (s.user_seeks + s.user_scans + s.user_lookups) AS [Difference]
FROM sys.dm_db_index_usage_stats AS s WITH (NOLOCK)
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON s.[object_id] = i.[object_id]
AND i.index_id = s.index_id
WHERE OBJECTPROPERTY(s.[object_id],'IsUserTable') = 1
AND s.database_id = DB_ID()
AND s.user_updates > (s.user_seeks + s.user_scans + s.user_lookups)
AND i.index_id > 1 AND i.[type_desc] = N'NONCLUSTERED'
AND i.is_primary_key = 0 AND i.is_unique_constraint = 0 AND i.is_unique = 0
ORDER BY [Difference] DESC, [Total Writes] DESC, [Total Reads] ASC OPTION (RECOMPILE);
------

-- Look for indexes with high numbers of writes and zero or very low numbers of reads
-- Consider your complete workload, and how long your instance has been running
-- Investigate further before dropping an index!


-- Missing Indexes for current database by Index Advantage  (Query 69) (Missing Indexes)
SELECT DISTINCT CONVERT(decimal(18,2), user_seeks * avg_total_user_cost * (avg_user_impact * 0.01)) AS [index_advantage], 
migs.last_user_seek, mid.[statement] AS [Database.Schema.Table],
mid.equality_columns, mid.inequality_columns, mid.included_columns,
migs.unique_compiles, migs.user_seeks, migs.avg_total_user_cost, migs.avg_user_impact,
OBJECT_NAME(mid.[object_id]) AS [Table Name], p.rows AS [Table Rows]
FROM sys.dm_db_missing_index_group_stats AS migs WITH (NOLOCK)
INNER JOIN sys.dm_db_missing_index_groups AS mig WITH (NOLOCK)
ON migs.group_handle = mig.index_group_handle
INNER JOIN sys.dm_db_missing_index_details AS mid WITH (NOLOCK)
ON mig.index_handle = mid.index_handle
INNER JOIN sys.partitions AS p WITH (NOLOCK)
ON p.[object_id] = mid.[object_id]
WHERE mid.database_id = DB_ID()
AND p.index_id < 2 
ORDER BY index_advantage DESC OPTION (RECOMPILE);
------

-- Look at index advantage, last user seek time, number of user seeks to help determine source and importance
-- SQL Server is overly eager to add included columns, so beware
-- Do not just blindly add indexes that show up from this query!!!


-- Find missing index warnings for cached plans in the current database  (Query 70) (Missing Index Warnings)
-- Note: This query could take some time on a busy instance
SELECT TOP(25) OBJECT_NAME(objectid) AS [ObjectName], 
               cp.objtype, cp.usecounts, cp.size_in_bytes, query_plan
FROM sys.dm_exec_cached_plans AS cp WITH (NOLOCK)
CROSS APPLY sys.dm_exec_query_plan(cp.plan_handle) AS qp
WHERE CAST(query_plan AS NVARCHAR(MAX)) LIKE N'%MissingIndex%'
AND dbid = DB_ID()
ORDER BY cp.usecounts DESC OPTION (RECOMPILE);
------

-- Helps you connect missing indexes to specific stored procedures or queries
-- This can help you decide whether to add them or not


-- Breaks down buffers used by current database by object (table, index) in the buffer cache  (Query 71) (Buffer Usage)
-- Note: This query could take some time on a busy instance
SELECT OBJECT_NAME(p.[object_id]) AS [Object Name], p.index_id, 
CAST(COUNT(*)/128.0 AS DECIMAL(10, 2)) AS [Buffer size(MB)],  
COUNT(*) AS [BufferCount], p.[Rows] AS [Row Count],
p.data_compression_desc AS [Compression Type]
FROM sys.allocation_units AS a WITH (NOLOCK)
INNER JOIN sys.dm_os_buffer_descriptors AS b WITH (NOLOCK)
ON a.allocation_unit_id = b.allocation_unit_id
INNER JOIN sys.partitions AS p WITH (NOLOCK)
ON a.container_id = p.hobt_id
WHERE b.database_id = CONVERT(int, DB_ID())
AND p.[object_id] > 100
AND OBJECT_NAME(p.[object_id]) NOT LIKE N'plan_%'
AND OBJECT_NAME(p.[object_id]) NOT LIKE N'sys%'
AND OBJECT_NAME(p.[object_id]) NOT LIKE N'xml_index_nodes%'
GROUP BY p.[object_id], p.index_id, p.data_compression_desc, p.[Rows]
ORDER BY [BufferCount] DESC OPTION (RECOMPILE);
------

-- Tells you what tables and indexes are using the most memory in the buffer cache
-- It can help identify possible candidates for data compression


-- Get Table names, row counts, and compression status for clustered index or heap  (Query 72) (Table Sizes)
SELECT OBJECT_NAME(object_id) AS [ObjectName], 
SUM(Rows) AS [RowCount], data_compression_desc AS [CompressionType]
FROM sys.partitions WITH (NOLOCK)
WHERE index_id < 2 --ignore the partitions from the non-clustered index if any
AND OBJECT_NAME(object_id) NOT LIKE N'sys%'
AND OBJECT_NAME(object_id) NOT LIKE N'queue_%' 
AND OBJECT_NAME(object_id) NOT LIKE N'filestream_tombstone%' 
AND OBJECT_NAME(object_id) NOT LIKE N'fulltext%'
AND OBJECT_NAME(object_id) NOT LIKE N'ifts_comp_fragment%'
AND OBJECT_NAME(object_id) NOT LIKE N'filetable_updates%'
AND OBJECT_NAME(object_id) NOT LIKE N'xml_index_nodes%'
AND OBJECT_NAME(object_id) NOT LIKE N'sqlagent_job%'  
AND OBJECT_NAME(object_id) NOT LIKE N'plan_persist%'  
GROUP BY object_id, data_compression_desc
ORDER BY SUM(Rows) DESC OPTION (RECOMPILE);
------

-- Gives you an idea of table sizes, and possible data compression opportunities



-- Get some key table properties (Query 73) (Table Properties)
SELECT OBJECT_NAME(t.[object_id]) AS [ObjectName], p.[rows] AS [Table Rows], p.index_id, 
       p.data_compression_desc AS [Index Data Compression],
       t.create_date, t.lock_on_bulk_load, t.is_replicated, t.has_replication_filter, 
       t.is_tracked_by_cdc, t.lock_escalation_desc, t.is_filetable, 
	   t.is_memory_optimized, t.durability_desc, 
	   t.temporal_type_desc, t.is_remote_data_archive_enabled, t.is_external -- new for SQL Server 2016
FROM sys.tables AS t WITH (NOLOCK)
INNER JOIN sys.partitions AS p WITH (NOLOCK)
ON t.[object_id] = p.[object_id]
WHERE OBJECT_NAME(t.[object_id]) NOT LIKE N'sys%'
ORDER BY OBJECT_NAME(t.[object_id]), p.index_id OPTION (RECOMPILE);
------

-- Gives you some good information about your tables
-- is_memory_optimized and durability_desc were new in SQL Server 2014
-- temporal_type_desc, is_remote_data_archive_enabled, is_external were new in SQL Server 2016

-- sys.tables (Transact-SQL)
-- https://bit.ly/2Gk7998



-- When were Statistics last updated on all indexes?  (Query 74) (Statistics Update)
SELECT SCHEMA_NAME(o.Schema_ID) + N'.' + o.[NAME] AS [Object Name], o.[type_desc] AS [Object Type],
      i.[name] AS [Index Name], STATS_DATE(i.[object_id], i.index_id) AS [Statistics Date], 
      s.auto_created, s.no_recompute, s.user_created, s.is_incremental, s.is_temporary,
	  st.row_count, st.used_page_count
FROM sys.objects AS o WITH (NOLOCK)
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON o.[object_id] = i.[object_id]
INNER JOIN sys.stats AS s WITH (NOLOCK)
ON i.[object_id] = s.[object_id] 
AND i.index_id = s.stats_id
INNER JOIN sys.dm_db_partition_stats AS st WITH (NOLOCK)
ON o.[object_id] = st.[object_id]
AND i.[index_id] = st.[index_id]
WHERE o.[type] IN ('U', 'V')
AND st.row_count > 0
ORDER BY STATS_DATE(i.[object_id], i.index_id) DESC OPTION (RECOMPILE);
------  

-- Helps discover possible problems with out-of-date statistics
-- Also gives you an idea which indexes are the most active

-- sys.stats (Transact-SQL)
-- https://bit.ly/2GyAxrn

-- UPDATEs to Statistics (Erin Stellato)
-- https://bit.ly/2vhrYQy




-- Look at most frequently modified indexes and statistics (Query 75) (Volatile Indexes)
SELECT o.[name] AS [Object Name], o.[object_id], o.[type_desc], s.[name] AS [Statistics Name], 
       s.stats_id, s.no_recompute, s.auto_created, s.is_incremental, s.is_temporary,
	   sp.modification_counter, sp.[rows], sp.rows_sampled, sp.last_updated
FROM sys.objects AS o WITH (NOLOCK)
INNER JOIN sys.stats AS s WITH (NOLOCK)
ON s.object_id = o.object_id
CROSS APPLY sys.dm_db_stats_properties(s.object_id, s.stats_id) AS sp
WHERE o.[type_desc] NOT IN (N'SYSTEM_TABLE', N'INTERNAL_TABLE')
AND sp.modification_counter > 0
ORDER BY sp.modification_counter DESC, o.name OPTION (RECOMPILE);
------

-- This helps you understand your workload and make better decisions about 
-- things like data compression and adding new indexes to a table



-- Get fragmentation info for all indexes above a certain size in the current database  (Query 76) (Index Fragmentation)
-- Note: This query could take some time on a very large database
SELECT DB_NAME(ps.database_id) AS [Database Name], SCHEMA_NAME(o.[schema_id]) AS [Schema Name],
OBJECT_NAME(ps.OBJECT_ID) AS [Object Name], i.[name] AS [Index Name], ps.index_id, 
ps.index_type_desc, ps.avg_fragmentation_in_percent, 
ps.fragment_count, ps.page_count, i.fill_factor, i.has_filter, 
i.filter_definition, i.[allow_page_locks]
FROM sys.dm_db_index_physical_stats(DB_ID(),NULL, NULL, NULL , N'LIMITED') AS ps
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON ps.[object_id] = i.[object_id] 
AND ps.index_id = i.index_id
INNER JOIN sys.objects AS o WITH (NOLOCK)
ON i.[object_id] = o.[object_id]
WHERE ps.database_id = DB_ID()
AND ps.page_count > 2500
ORDER BY ps.avg_fragmentation_in_percent DESC OPTION (RECOMPILE);
------

-- Helps determine whether you have framentation in your relational indexes
-- and how effective your index maintenance strategy is


--- Index Read/Write stats (all tables in current DB) ordered by Reads  (Query 77) (Overall Index Usage - Reads)
SELECT OBJECT_NAME(i.[object_id]) AS [ObjectName], i.[name] AS [IndexName], i.index_id, 
       s.user_seeks, s.user_scans, s.user_lookups,
	   s.user_seeks + s.user_scans + s.user_lookups AS [Total Reads], 
	   s.user_updates AS [Writes],  
	   i.[type_desc] AS [Index Type], i.fill_factor AS [Fill Factor], i.has_filter, i.filter_definition, 
	   s.last_user_scan, s.last_user_lookup, s.last_user_seek
FROM sys.indexes AS i WITH (NOLOCK)
LEFT OUTER JOIN sys.dm_db_index_usage_stats AS s WITH (NOLOCK)
ON i.[object_id] = s.[object_id]
AND i.index_id = s.index_id
AND s.database_id = DB_ID()
WHERE OBJECTPROPERTY(i.[object_id],'IsUserTable') = 1
ORDER BY s.user_seeks + s.user_scans + s.user_lookups DESC OPTION (RECOMPILE); -- Order by reads
------

-- Show which indexes in the current database are most active for Reads


--- Index Read/Write stats (all tables in current DB) ordered by Writes  (Query 78) (Overall Index Usage - Writes)
SELECT OBJECT_NAME(i.[object_id]) AS [ObjectName], i.[name] AS [IndexName], i.index_id,
	   s.user_updates AS [Writes], s.user_seeks + s.user_scans + s.user_lookups AS [Total Reads], 
	   i.[type_desc] AS [Index Type], i.fill_factor AS [Fill Factor], i.has_filter, i.filter_definition,
	   s.last_system_update, s.last_user_update
FROM sys.indexes AS i WITH (NOLOCK)
LEFT OUTER JOIN sys.dm_db_index_usage_stats AS s WITH (NOLOCK)
ON i.[object_id] = s.[object_id]
AND i.index_id = s.index_id
AND s.database_id = DB_ID()
WHERE OBJECTPROPERTY(i.[object_id],'IsUserTable') = 1
ORDER BY s.user_updates DESC OPTION (RECOMPILE);						 -- Order by writes
------

-- Show which indexes in the current database are most active for Writes


-- Get in-memory OLTP index usage (Query 79) (XTP Index Usage)
SELECT OBJECT_NAME(i.[object_id]) AS [Object Name], i.index_id, i.[name] AS [Index Name],
       i.[type_desc], xis.scans_started, xis.scans_retries, 
	   xis.rows_touched, xis.rows_returned
FROM sys.dm_db_xtp_index_stats AS xis WITH (NOLOCK)
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON i.[object_id] = xis.[object_id] 
AND i.index_id = xis.index_id 
ORDER BY OBJECT_NAME(i.[object_id]) OPTION (RECOMPILE);
------

-- This gives you some index usage statistics for in-memory OLTP
-- Returns no data if you are not using in-memory OLTP

-- Guidelines for Using Indexes on Memory-Optimized Tables
-- https://bit.ly/2GCP8lF



-- Look at Columnstore index physical statistics (Query 80) (Columnstore Index Physical Stat)
SELECT OBJECT_NAME(ps.object_id) AS [TableName],  
	i.[name] AS [IndexName], ps.index_id, ps.partition_number,
	ps.delta_store_hobt_id, ps.state_desc, ps.total_rows, ps.size_in_bytes,
	ps.trim_reason_desc, ps.generation, ps.transition_to_compressed_state_desc,
	ps.has_vertipaq_optimization, ps.deleted_rows,
	100 * (ISNULL(ps.deleted_rows, 0))/ps.total_rows AS [Fragmentation]
FROM sys.dm_db_column_store_row_group_physical_stats AS ps WITH (NOLOCK)
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON ps.object_id = i.object_id 
AND ps.index_id = i.index_id
ORDER BY ps.object_id, ps.partition_number, ps.row_group_id OPTION (RECOMPILE);
------

-- sys.dm_db_column_store_row_group_physical_stats (Transact-SQL)
-- https://bit.ly/2q276XQ



-- Get lock waits for current database (Query 81) (Lock Waits)
SELECT o.name AS [table_name], i.name AS [index_name], ios.index_id, ios.partition_number,
		SUM(ios.row_lock_wait_count) AS [total_row_lock_waits], 
		SUM(ios.row_lock_wait_in_ms) AS [total_row_lock_wait_in_ms],
		SUM(ios.page_lock_wait_count) AS [total_page_lock_waits],
		SUM(ios.page_lock_wait_in_ms) AS [total_page_lock_wait_in_ms],
		SUM(ios.page_lock_wait_in_ms)+ SUM(row_lock_wait_in_ms) AS [total_lock_wait_in_ms]
FROM sys.dm_db_index_operational_stats(DB_ID(), NULL, NULL, NULL) AS ios
INNER JOIN sys.objects AS o WITH (NOLOCK)
ON ios.[object_id] = o.[object_id]
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON ios.[object_id] = i.[object_id] 
AND ios.index_id = i.index_id
WHERE o.[object_id] > 100
GROUP BY o.name, i.name, ios.index_id, ios.partition_number
HAVING SUM(ios.page_lock_wait_in_ms)+ SUM(row_lock_wait_in_ms) > 0
ORDER BY total_lock_wait_in_ms DESC OPTION (RECOMPILE);
------

-- This query is helpful for troubleshooting blocking and deadlocking issues



-- Look at UDF execution statistics (Query 82) (UDF Statistics)
SELECT OBJECT_NAME(object_id) AS [Function Name], execution_count,
	   total_worker_time, total_logical_reads, total_physical_reads, total_elapsed_time, 
	   total_elapsed_time/execution_count AS [avg_elapsed_time],
	   FORMAT(cached_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Plan Cached Time]
FROM sys.dm_exec_function_stats WITH (NOLOCK) 
WHERE database_id = DB_ID()
ORDER BY total_worker_time DESC OPTION (RECOMPILE); 
------

-- New for SQL Server 2016
-- Helps you investigate scalar UDF performance issues
-- Does not return information for table valued functions

-- sys.dm_exec_function_stats (Transact-SQL)
-- https://bit.ly/2q1Q6BM


-- Get QueryStore Options for this database (Query 83) (QueryStore Options)
SELECT actual_state_desc, desired_state_desc, [interval_length_minutes],
       current_storage_size_mb, [max_storage_size_mb], 
	   query_capture_mode_desc, size_based_cleanup_mode_desc
FROM sys.database_query_store_options WITH (NOLOCK) OPTION (RECOMPILE);
------

-- New for SQL Server 2016
-- Requires that Query Store is enabled for this database

-- Make sure that the actual_state_desc is the same as desired_state_desc
-- Make sure that the current_storage_size_mb is less than the max_storage_size_mb

-- Tuning Workload Performance with Query Store
-- https://bit.ly/1kHSl7w


-- Get highest aggregate duration queries over last hour (Query 84) (High Aggregate Duration Queries)
WITH AggregatedDurationLastHour
AS
(SELECT q.query_id, SUM(rs.count_executions * rs.avg_duration) AS total_duration,
   COUNT (DISTINCT p.plan_id) AS number_of_plans
   FROM sys.query_store_query_text AS qt WITH (NOLOCK)
   INNER JOIN sys.query_store_query AS q WITH (NOLOCK)
   ON qt.query_text_id = q.query_text_id
   INNER JOIN sys.query_store_plan AS p WITH (NOLOCK)
   ON q.query_id = p.query_id
   INNER JOIN sys.query_store_runtime_stats AS rs WITH (NOLOCK)
   ON rs.plan_id = p.plan_id
   INNER JOIN sys.query_store_runtime_stats_interval AS rsi WITH (NOLOCK)
   ON rsi.runtime_stats_interval_id = rs.runtime_stats_interval_id
   WHERE rsi.start_time >= DATEADD(hour, -1, GETUTCDATE()) 
   AND rs.execution_type_desc = N'Regular'
   GROUP BY q.query_id), OrderedDuration 
AS
(SELECT query_id, total_duration, number_of_plans, 
 ROW_NUMBER () OVER (ORDER BY total_duration DESC, query_id) AS RN
 FROM AggregatedDurationLastHour)
SELECT OBJECT_NAME(q.object_id) AS [Containing Object], qt.query_sql_text, 
od.total_duration AS [Total Duration (microsecs)], 
od.number_of_plans AS [Plan Count],
p.is_forced_plan, p.is_parallel_plan, p.is_trivial_plan,
q.query_parameterization_type_desc, p.[compatibility_level],
p.last_compile_start_time, 
q.last_execution_time,
CONVERT(xml, p.query_plan) AS query_plan_xml 
FROM OrderedDuration AS od 
INNER JOIN sys.query_store_query AS q WITH (NOLOCK)
ON q.query_id  = od.query_id
INNER JOIN sys.query_store_query_text AS qt WITH (NOLOCK)
ON q.query_text_id = qt.query_text_id
INNER JOIN sys.query_store_plan AS p WITH (NOLOCK)
ON q.query_id = p.query_id
WHERE od.RN <= 50 
ORDER BY od.total_duration DESC OPTION (RECOMPILE);
------

-- New for SQL Server 2016
-- Requires that QueryStore is enabled for this database



-- Get highest aggregate CPU time queries over last hour (Query 85) (High Aggregate CPU Queries)
WITH AggregatedCPULastHour
AS
(SELECT q.query_id, SUM(rs.count_executions * rs.avg_cpu_time) AS total_cpu_time,
   COUNT (DISTINCT p.plan_id) AS number_of_plans
   FROM sys.query_store_query_text AS qt WITH (NOLOCK)
   INNER JOIN sys.query_store_query AS q WITH (NOLOCK)
   ON qt.query_text_id = q.query_text_id
   INNER JOIN sys.query_store_plan AS p WITH (NOLOCK)
   ON q.query_id = p.query_id
   INNER JOIN sys.query_store_runtime_stats AS rs WITH (NOLOCK)
   ON rs.plan_id = p.plan_id
   INNER JOIN sys.query_store_runtime_stats_interval AS rsi WITH (NOLOCK)
   ON rsi.runtime_stats_interval_id = rs.runtime_stats_interval_id
   WHERE rsi.start_time >= DATEADD(hour, -1, GETUTCDATE()) 
   AND rs.execution_type_desc = N'Regular'
   GROUP BY q.query_id), OrderedDuration 
AS
(SELECT query_id, total_cpu_time, number_of_plans, 
 ROW_NUMBER () OVER (ORDER BY total_cpu_time DESC, query_id) AS RN
 FROM AggregatedCPULastHour)
SELECT OBJECT_NAME(q.object_id) AS [Containing Object], qt.query_sql_text, 
od.total_cpu_time AS [Total CPU Time (microsecs)], 
od.number_of_plans AS [Plan Count],
p.is_forced_plan, p.is_parallel_plan, p.is_trivial_plan,
q.query_parameterization_type_desc, p.[compatibility_level],
p.last_compile_start_time, 
q.last_execution_time,
CONVERT(xml, p.query_plan) AS query_plan_xml 
FROM OrderedDuration AS od 
INNER JOIN sys.query_store_query AS q WITH (NOLOCK)
ON q.query_id  = od.query_id
INNER JOIN sys.query_store_query_text AS qt WITH (NOLOCK)
ON q.query_text_id = qt.query_text_id
INNER JOIN sys.query_store_plan AS p WITH (NOLOCK)
ON q.query_id = p.query_id
WHERE od.RN <= 50 
ORDER BY od.total_cpu_time DESC OPTION (RECOMPILE);
------

-- New for SQL Server 2016
-- Requires that QueryStore is enabled for this database


-- Get input buffer information for the current database (Query 86) (Input Buffer)
SELECT es.session_id, DB_NAME(es.database_id) AS [Database Name],
       es.login_time, es.cpu_time, es.logical_reads, es.memory_usage,
       es.[status], ib.event_info AS [Input Buffer]
FROM sys.dm_exec_sessions AS es WITH (NOLOCK)
CROSS APPLY sys.dm_exec_input_buffer(es.session_id, NULL) AS ib
WHERE es.database_id = DB_ID()
AND es.session_id > 50
AND es.session_id <> @@SPID OPTION (RECOMPILE);
------

-- Gives you input buffer information from all non-system sessions for the current database
-- Replaces DBCC INPUTBUFFER

-- New DMF for retrieving input buffer in SQL Server
-- https://bit.ly/2uHKMbz

-- sys.dm_exec_input_buffer (Transact-SQL)
-- https://bit.ly/2J5Hf9q



-- Get any resumable index rebuild operation information (Query 87) (Resumable Index Rebuild)
SELECT OBJECT_NAME(iro.object_id) AS [Object Name], iro.index_id, iro.name AS [Index Name],
       iro.sql_text, iro.last_max_dop_used, iro.partition_number, iro.state_desc, 
	   iro.start_time, iro.percent_complete
FROM  sys.index_resumable_operations AS iro WITH (NOLOCK)
OPTION (RECOMPILE);
------ 

-- index_resumable_operations (Transact-SQL)
-- https://bit.ly/2pYSWqq


-- Get database automatic tuning options (Query 88) (Automatic Tuning Options)
SELECT [name], desired_state_desc, actual_state_desc, reason_desc
FROM sys.database_automatic_tuning_options WITH (NOLOCK)
OPTION (RECOMPILE);
------ 

-- sys.database_automatic_tuning_options (Transact-SQL)
-- https://bit.ly/2FHhLkL



-- Look at recent Full backups for the current database (Query 89) (Recent Full Backups)
SELECT TOP (30) bs.machine_name, bs.server_name, bs.database_name AS [Database Name], bs.recovery_model,
CONVERT (BIGINT, bs.backup_size / 1048576 ) AS [Uncompressed Backup Size (MB)],
CONVERT (BIGINT, bs.compressed_backup_size / 1048576 ) AS [Compressed Backup Size (MB)],
CONVERT (NUMERIC (20,2), (CONVERT (FLOAT, bs.backup_size) /
CONVERT (FLOAT, bs.compressed_backup_size))) AS [Compression Ratio], bs.has_backup_checksums, bs.is_copy_only, bs.encryptor_type,
DATEDIFF (SECOND, bs.backup_start_date, bs.backup_finish_date) AS [Backup Elapsed Time (sec)],
bs.backup_finish_date AS [Backup Finish Date], bmf.physical_device_name AS [Backup Location], bmf.physical_block_size
FROM msdb.dbo.backupset AS bs WITH (NOLOCK)
INNER JOIN msdb.dbo.backupmediafamily AS bmf WITH (NOLOCK)
ON bs.media_set_id = bmf.media_set_id  
WHERE bs.database_name = DB_NAME(DB_ID())
AND bs.[type] = 'D' -- Change to L if you want Log backups
ORDER BY bs.backup_finish_date DESC OPTION (RECOMPILE);
------

-- Are your backup sizes and times changing over time?
-- Are you using backup compression?
-- Are you using backup checksums?
-- Are you doing copy_only backups?
-- Are you doing encrypted backups?
-- Have you done any backup tuning with striped backups, or changing the parameters of the backup command?

-- In SQL Server 2016, native SQL Server backup compression actually works 
-- much better with databases that are using TDE than in previous versions
-- https://bit.ly/28Rpb2x


-- These four Pluralsight Courses go into more detail about how to run these queries and interpret the results

-- SQL Server 2017: Diagnosing Configuration Issues with DMVs
-- https://bit.ly/2MSUDUL

-- SQL Server 2014 DMV Diagnostic Queries � Part 1 
-- https://bit.ly/2plxCer

-- SQL Server 2014 DMV Diagnostic Queries � Part 2
-- https://bit.ly/2IuJpzI

-- SQL Server 2014 DMV Diagnostic Queries � Part 3
-- https://bit.ly/2FIlCPb



-- Sign up for Microsoft Visual Studio Dev Essentials and get a free three month pass to Pluralsight

-- Microsoft Visual Studio Dev Essentials
-- http://bit.ly/1q6xbDL


-- Sign up for Microsoft Azure Essentials and get lots of free Azure usage credits, MCP exam voucher, three month Pluralsight subscription

-- Microsoft Azure Essentials
-- https://bit.ly/2JMWe8x


-- August 2017 blog series about upgrading and migrating to SQL Server 2016/2017
-- https://bit.ly/2ftKVrX

tools\dbatools\bin\smo\coreclr\Microsoft.SqlServer.Management.PSProvider.dll

md5: 725CFF103DB829F0A48174CDE0CB9E99 | sha1: 6A9CB5025C71E92B9CAE7B7A479A6A7B54452F40 | sha256: 291D74136F08202DEAF64DEABD45F4DA44132A509344DD4300314D7A765943A5 | sha512: CC35FCA06C0D39D4DDEAFB4FBEB753DC288F724745BD9AE36B6F52C66A1BD06C4E1F5D20F4C2D3624CDDBFA20C6C435863F7C442075D007CF634B47F0F227FBB

tools\dbatools\bin\smo\coreclr\Microsoft.SqlServer.Management.PSSnapins.dll

md5: 2F726594DFB553FD15322C69EDE08B74 | sha1: BBD5CC49B538D02E30EC1B6F7FFD9A039B05BBD4 | sha256: EACBAAD09C5624DF9985116E9449960DD0701BF12B13BEEA8F32BDD69712B13C | sha512: 597D4EA2EA7ECA3CEF1096A7EA0EA6F71774781A9DCE86EF3E277E670FF3647406709FE55DA7BCD5FB27F56E486B320F1E9BBE4E2C9CF930082A6F304F37855E

tools\dbatools\bin\smo\coreclr\Microsoft.SqlServer.Management.Sdk.Sfc.dll

md5: 76E51C34730068F32B9B7A6C49091252 | sha1: 32E101CE10BE9A22719ED1C85198ABECA7C66726 | sha256: F2FBF444E1F532E8582185CCDFDC010FB58EE4369875A9AF5EAB7B43C6CBB59B | sha512: 8955E205756E3A7F296B99DFAB7C2FD0AA0628E4EE4C01FFC66527C3F41862E5DBFA17BCAD30D4FA569A7ED8BBE6A17086A12485BC3367DD07F4E53340780D78

tools\dbatools\bin\smo\coreclr\Microsoft.SqlServer.Management.XEvent.dll

md5: 8852BE0260AAFC00E2E49757F7F3D6D3 | sha1: 682C57866A0C07F7042235D50DBADAEBD3D0F808 | sha256: E496E40C48181463645064C16698AE60FE556C6B5F9ED51DCC8C6B6368A83DD9 | sha512: FDE8C5BBAF3256B7C534BCF5D0ACA200BE431B5D215E4B554385144991EC07C712DE71A8500532D43DA74E0DFFD315F4AB0990D6EA85DE00FAA7DED579F8BDEE

tools\dbatools\bin\smo\coreclr\Microsoft.SqlServer.Management.XEventDbScoped.dll

md5: 458299069ACAC4233D7D16C375B68F12 | sha1: 32BB3DD482CB7E67BAFC806174B89ED723D744E8 | sha256: 740CC31E11E16B5BB65BCA083D0A4AE0254E59942EE4A410F1998519C0C2A7EB | sha512: EEC8CBAAD52EA17377F46C0D8C915866FD4A5C27BF5D73689B292190A738035B9CF83C5C4A48573EB3A05526585E1DC714411D3FF873F3596B9B71F8E69B35B7

tools\dbatools\bin\smo\coreclr\Microsoft.SqlServer.Management.XEventDbScopedEnum.dll

md5: 29D513C4A3E722E31658D48D392162B6 | sha1: 600D3E6E5FCE1A12251F9025AA1D0688EF7ED00E | sha256: F8625A1BCE507258D11D437E24865FD4FFFED25F7B3D9E62EDE60B705776CFB7 | sha512: D104727FEE1AB645E40DCF14DBFB2F9BE69D36A95862C56D84299DB7C074D5730B11E29C1134ABDEE4C7B8EB9CDB6DA91D5A4599B6722F0B37F476D927D71AE3

tools\dbatools\bin\smo\coreclr\Microsoft.SqlServer.Management.XEventEnum.dll

md5: 86400F50F84A857F2B101CFFD06A2738 | sha1: AB316809D2844849AC1F2971C5EF99EFCFBE8B66 | sha256: C3D4C5F0B0128BAC2E3608B95A1BBC9C313ACB4330ED7BE412494E7B90416E99 | sha512: 9D38E2D3497945492BFE6D620D2E2BAE3BDA6681A9D9AAF3F130224627D0AAE6CAFDC54278E25F4C3507A90AB7124666AAF6FF1A337A5E78A044533463F9D8E9

tools\dbatools\bin\smo\coreclr\Microsoft.SqlServer.Smo.dll

md5: 9A097C9540BF37ED08B9C554D55C430F | sha1: D1B1FC2D2308B8CD10261A2B44FF127595084EAD | sha256: C1514D8239F492E79C42E38FF95E8B745B25A7662991CD3F0301F1136F9B17B0 | sha512: 9805E72C3378412DB26C5B7EAFAABAF42715715C607B7073610BFB8A5F4EBB743A89459D104FA7D89A42E49D49D5224BC0E4133B170E99579FEF3E73061E4222

tools\dbatools\bin\smo\coreclr\Microsoft.SqlServer.SmoExtended.dll

md5: EDF3EFF15A707E08BD8BD0AA4A8DF4C2 | sha1: A5F75CACFB7D6D5211EB4008CA6759AD16609738 | sha256: BE90CE5E335D3FF0BBB51B96FC1BF0575D47466D3BC78DAEAEA927FF60659EB1 | sha512: 1167A05D1A3273E035C29C1284E2CEE396F034F607487E06153A0E70BF22F83937B1E12A712782ABDBA4B90569A74CF8B879FBE5E4B5478035194A16E09211DF

tools\dbatools\bin\diagnosticquery\SQLServerDiagnosticQueries_2016_201810.sql


-- SQL Server 2016 Diagnostic Information Queries
-- Glenn Berry 
-- Last Modified: November 14, 2018
-- https://www.sqlskills.com/blogs/glenn/
-- http://sqlserverperformance.wordpress.com/
-- Twitter: GlennAlanBerry

-- Please listen to my Pluralsight courses
-- https://www.pluralsight.com/author/glenn-berry

-- If you want to find all of our SQLskills SQL101 blog posts, check out https://www.sqlskills.com/help/sql101/


-- Please make sure you are using the correct version of these diagnostic queries for your version of SQL Server


-- If you like PowerShell, there is a very useful community solution for running these queries in an automated fashion
-- https://dbatools.io/

-- Invoke-DbaDiagnosticQuery
-- https://dbatools.io/functions/invoke-dbadiagnosticquery/


--******************************************************************************
--*   Copyright (C) 2018 Glenn Berry, SQLskills.com
--*   All rights reserved. 
--*
--*   For more scripts and sample code, check out 
--*      https://www.sqlskills.com/blogs/glenn
--*
--*   You may alter this code for your own *non-commercial* purposes. You may
--*   republish altered code as long as you include this copyright and give due credit. 
--*
--*
--*   THIS CODE AND INFORMATION ARE PROVIDED "AS IS" WITHOUT WARRANTY OF 
--*   ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED 
--*   TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A
--*   PARTICULAR PURPOSE. 
--*
--******************************************************************************

-- Check the major product version to see if it is SQL Server 2016 CTP 2 or greater
IF NOT EXISTS (SELECT * WHERE CONVERT(varchar(128), SERVERPROPERTY('ProductVersion')) LIKE '13%')
	BEGIN
		DECLARE @ProductVersion varchar(128) = CONVERT(varchar(128), SERVERPROPERTY('ProductVersion'));
		RAISERROR ('Script does not match the ProductVersion [%s] of this instance. Many of these queries may not work on this version.' , 18 , 16 , @ProductVersion);
	END
	ELSE
		PRINT N'You have the correct major version of SQL Server for this diagnostic information script';
	

-- Instance level queries *******************************

-- SQL and OS Version information for current instance  (Query 1) (Version Info)
SELECT @@SERVERNAME AS [Server Name], @@VERSION AS [SQL Server and OS Version Info];
------

-- SQL Server 2016 RTM Branch Builds								-- SQL Server 2016 SP1 Branch Builds                     -- SQL Server 2016 SP2 Branch Builds										
-- Build			Description			Release Date				Build			Description			Release Date	     Build			Description			Release Date			
-- 13.0.200.172		CTP 2.0				5/26/2015
-- 13.0.300.44		CTP 2.1				6/14/2015
-- 13.0.407.1		CTP 2.2				7/28/2015
-- 13.0.500.53		CTP 2.3				9/4/2015
-- 13.0.600.65		CTP 2.4				9/30/2015
-- 13.0.700.242		CTP 3.0				10/29/2015
-- 13.0.900.73		CTP 3.2				12/12/2015
-- 13.0.1000.276	CTP 3.3				1/27/2016
-- 13.0.1100.288	RC0					3/2/2016
-- 13.0.1200.242	RC1					3/18/2016 
-- 13.0.1300.275	RC2					3/28/2016
-- 13.0.1400.361	RC3					4/11/2016
-- 13.0.1601.5		RTM					6/1/2016
-- 13.0.1708.0		RTM-GDR				6/12/2016
-- 13.0.2149.0		RTM CU1				7/25/2016
-- 13.0.2164.0		RTM CU2				9/22/2016
-- 13.0.2186.0		RTM CU3				11/16/2016	---->			13.0.4001.0		SP1 RTM				 11/16/2016
-- 13.0.2193.0		RTM CU4				1/18/2017   ---->			13.0.4411.0		SP1 CU1				 1/18/2017
-- 13.0.2197.0		RTM CU5				3/20/2017   ---->			13.0.4422.0		SP1 CU2				 3/20/2017
-- 13.0.2204.0		RTM CU6				5/15/2017   ---->			13.0.4435.0		SP1 CU3				 5/15/2017
-- 13.0.2210.0		RTM CU7				8/8/2017    ---->			13.0.4446.0		SP1 CU4				  8/8/2017
-- 13.0.2213.0		RTM CU8				9/18/2017   ---->           13.0.4451.0		SP1 CU5				 9/18/2017
-- 13.0.2216.0		RTM CU9				11/21/2017  ---->			13.0.4457.0		SP1 CU6				 11/21/2017
--																	13.0.4466.4		SP1 CU7				  1/4/2018
--																	13.0.4474.0		SP1 CU8				  3/20/2018	---->	13.0.5026.0		SP2 RTM				4/24/2018
--                                                                  13.0.4502.0		SP1 CU9				  5/30/2018 ---->   13.0.5149.0		SP2 CU1				5/30/2018
--                                                                  13.0.4514.0     SP1 CU10			  7/16/2018 ---->   13.0.5153.0     SP2 CU2				7/16/2018
--																	13.0.4528.0		SP1 CU11			  9/17/2018	---->	13.0.5216.0		SP2 CU3				9/20/2018
--																	13.0.4541.0		SP1 CU12			 11/13/2018	---_>	13.0.5233.0		SP2 CU4			   11/13/2018			


-- How to determine the version, edition and update level of SQL Server and its components 
-- https://bit.ly/2oAjKgW														

-- How to obtain the latest Service Pack for SQL Server 2016
-- https://bit.ly/2egtfzK

-- Microsoft SQL Server 2016 SP1 Latest Cumulative Update
-- https://bit.ly/2jTwxWC

-- SQL Server 2016 build versions 
-- https://bit.ly/2epkTDT

-- Where to find information about the latest SQL Server builds
-- https://bit.ly/2IGHbfY

-- Performance and Stability Related Fixes in Post-SQL Server 2016 SP1 Builds
-- https://bit.ly/2gr7k9L

-- Performance and Stability Related Fixes in Post-SQL Server 2016 SP2 Builds
-- https://bit.ly/2K3LoPf			

-- Announcing updates to the SQL Server Incremental Servicing Model (ISM)
-- https://bit.ly/1RzYITz

-- Update Center for Microsoft SQL Server
-- https://bit.ly/2pZptuQ

-- Download SQL Server Management Studio (SSMS)
-- https://bit.ly/1OcupT9

-- Download and install Azure Data Studio 
-- https://bit.ly/2vgke1A
	


-- Get socket, physical core and logical core count from the SQL Server Error log. (Query 2) (Core Counts)
-- This query might take a few seconds depending on the size of your error log
EXEC sys.xp_readerrorlog 0, 1, N'detected', N'socket';
------

-- This can help you determine the exact core counts used by SQL Server and whether HT is enabled or not
-- It can also help you confirm your SQL Server licensing model
-- Be on the lookout for this message "using 40 logical processors based on SQL Server licensing" 
-- (when you have more than 40 logical cores) which means grandfathered Server/CAL licensing
-- This query will return no results if your error log has been recycled since the instance was last started



-- Get selected server properties (Query 3) (Server Properties)
SELECT SERVERPROPERTY('MachineName') AS [MachineName], 
SERVERPROPERTY('ServerName') AS [ServerName],  
SERVERPROPERTY('InstanceName') AS [Instance], 
SERVERPROPERTY('IsClustered') AS [IsClustered], 
SERVERPROPERTY('ComputerNamePhysicalNetBIOS') AS [ComputerNamePhysicalNetBIOS], 
SERVERPROPERTY('Edition') AS [Edition], 
SERVERPROPERTY('ProductLevel') AS [ProductLevel],				-- What servicing branch (RTM/SP/CU)
SERVERPROPERTY('ProductUpdateLevel') AS [ProductUpdateLevel],	-- Within a servicing branch, what CU# is applied
SERVERPROPERTY('ProductVersion') AS [ProductVersion],
SERVERPROPERTY('ProductMajorVersion') AS [ProductMajorVersion], 
SERVERPROPERTY('ProductMinorVersion') AS [ProductMinorVersion], 
SERVERPROPERTY('ProductBuild') AS [ProductBuild], 
SERVERPROPERTY('ProductBuildType') AS [ProductBuildType],			  -- Is this a GDR or OD hotfix (NULL if on a CU build)
SERVERPROPERTY('ProductUpdateReference') AS [ProductUpdateReference], -- KB article number that is applicable for this build
SERVERPROPERTY('ProcessID') AS [ProcessID],
SERVERPROPERTY('Collation') AS [Collation], 
SERVERPROPERTY('IsFullTextInstalled') AS [IsFullTextInstalled], 
SERVERPROPERTY('IsIntegratedSecurityOnly') AS [IsIntegratedSecurityOnly],
SERVERPROPERTY('FilestreamConfiguredLevel') AS [FilestreamConfiguredLevel],
SERVERPROPERTY('IsHadrEnabled') AS [IsHadrEnabled], 
SERVERPROPERTY('HadrManagerStatus') AS [HadrManagerStatus],
SERVERPROPERTY('InstanceDefaultDataPath') AS [InstanceDefaultDataPath],
SERVERPROPERTY('InstanceDefaultLogPath') AS [InstanceDefaultLogPath],
SERVERPROPERTY('BuildClrVersion') AS [Build CLR Version],
SERVERPROPERTY('IsXTPSupported') AS [IsXTPSupported],
SERVERPROPERTY('IsPolybaseInstalled') AS [IsPolybaseInstalled],				-- New for SQL Server 2016
SERVERPROPERTY('IsAdvancedAnalyticsInstalled') AS [IsRServicesInstalled];	-- New for SQL Server 2016
------

-- This gives you a lot of useful information about your instance of SQL Server,
-- such as the ProcessID for SQL Server and your collation
-- Note: Some columns will be NULL on older SQL Server builds

-- SERVERPROPERTY (Transact-SQL)
-- https://bit.ly/2eeaXeI



-- Get instance-level configuration values for instance  (Query 4) (Configuration Values)
SELECT name, value, value_in_use, minimum, maximum, [description], is_dynamic, is_advanced
FROM sys.configurations WITH (NOLOCK)
ORDER BY name OPTION (RECOMPILE);
------

-- Focus on these settings:
-- automatic soft-NUMA disabled (should be 0 in most cases)
-- backup checksum default (should be 1)
-- backup compression default (should be 1 in most cases)
-- clr enabled (only enable if it is needed)
-- cost threshold for parallelism (depends on your workload)
-- lightweight pooling (should be zero)
-- max degree of parallelism (depends on your workload and hardware)
-- max server memory (MB) (set to an appropriate value, not the default)
-- optimize for ad hoc workloads (should be 1)
-- priority boost (should be zero)
-- remote admin connections (should be 1)

-- New configuration options for SQL Server 2016
-- allow polybase export (Allow INSERT into a Hadoop external table)
-- automatic soft-NUMA disabled (Automatic soft-NUMA is enabled by default)
-- external scripts enabled (Allows execution of external scripts, for R Services)
-- hadoop connectivity (Configure SQL Server to connect to external Hadoop or Microsoft Azure storage blob data sources through PolyBase)
-- polybase network encryption (Configure SQL Server to encrypt control and data channels when using PolyBase)
-- remote data archive (Allow the use of the REMOTE_DATA_ARCHIVE data access for Stretch databases)

-- SQLSweet16!, Episode 1: Backup Compression for TDE-enabled Databases
-- https://bit.ly/28Rpb2x



-- Returns a list of all global trace flags that are enabled (Query 5) (Global Trace Flags)
DBCC TRACESTATUS (-1);
------

-- If no global trace flags are enabled, no results will be returned.
-- It is very useful to know what global trace flags are currently enabled as part of the diagnostic process.

-- Common trace flags that should be enabled in most cases
-- TF 3226 - Supresses logging of successful database backup messages to the SQL Server Error Log
--           https://bit.ly/2p6MTjS

-- TF 6534 - Enables use of native code to improve performance with spatial data
--           https://bit.ly/2HrQUpU

-- The behavior of TF 1117, 1118 are enabled for tempdb in SQL Server 2016 by default
-- SQL 2016 � It Just Runs Faster: -T1117 and -T1118 changes for TEMPDB and user databases
-- https://bit.ly/2lbNWxK           

-- The behavior of TF 2371 is enabled by default in SQL Server 2016 and newer (in compat level 130 and higher)

-- DBCC TRACEON - Trace Flags (Transact-SQL)
-- https://bit.ly/2FuSvPg



-- Returns status of instant file initialization (Query 6) (IFI Status)
EXEC sys.xp_readerrorlog 0, 1, N'Database Instant File Initialization';
------

-- Lets you determine whether Instant File Initialization (IFI) is enabled for the instance
-- This should be enabled in the vast majority of cases
-- SQL Server 2016 lets you enable this during the SQL server installation process

-- Database Instant File Initialization
-- https://bit.ly/2nTX74y

-- Misconceptions around instant file initialization
-- https://bit.ly/2oBSKgZ



-- SQL Server Process Address space info  (Query 7) (Process Memory)
-- (shows whether locked pages is enabled, among other things)
SELECT physical_memory_in_use_kb/1024 AS [SQL Server Memory Usage (MB)],
	   locked_page_allocations_kb/1024 AS [SQL Server Locked Pages Allocation (MB)],
       large_page_allocations_kb/1024 AS [SQL Server Large Pages Allocation (MB)], 
	   page_fault_count, memory_utilization_percentage, available_commit_limit_kb, 
	   process_physical_memory_low, process_virtual_memory_low
FROM sys.dm_os_process_memory WITH (NOLOCK) OPTION (RECOMPILE);
------

-- You want to see 0 for process_physical_memory_low
-- You want to see 0 for process_virtual_memory_low
-- This indicates that you are not under internal memory pressure
-- If locked_page_allocations_kb > 0, then LPIM is enabled

-- How to enable the "locked pages" feature in SQL Server 2012
-- https://bit.ly/2F5UjOA

-- Memory Management Architecture Guide
-- https://bit.ly/2JKkadC 



-- SQL Server Services information (Query 8) (SQL Server Services Info)
SELECT servicename, process_id, startup_type_desc, status_desc, 
last_startup_time, service_account, is_clustered, cluster_nodename, [filename], 
instant_file_initialization_enabled -- New in SQL Server 2016 SP1
FROM sys.dm_server_services WITH (NOLOCK) OPTION (RECOMPILE);
------

-- Tells you the account being used for the SQL Server Service and the SQL Agent Service
-- Shows the process_id, when they were last started, and their current status
-- Also shows whether you are running on a failover cluster instance, and what node you are running on
-- Also shows whether IFI is enabled

-- sys.dm_server_services (Transact-SQL)
-- https://bit.ly/2oKa1Un


-- Last backup information by database  (Query 9) (Last Backup By Database)
SELECT ISNULL(d.[name], bs.[database_name]) AS [Database], d.recovery_model_desc AS [Recovery Model], 
       d.log_reuse_wait_desc AS [Log Reuse Wait Desc],
    MAX(CASE WHEN [type] = 'D' THEN bs.backup_finish_date ELSE NULL END) AS [Last Full Backup],
    MAX(CASE WHEN [type] = 'I' THEN bs.backup_finish_date ELSE NULL END) AS [Last Differential Backup],
    MAX(CASE WHEN [type] = 'L' THEN bs.backup_finish_date ELSE NULL END) AS [Last Log Backup]
FROM sys.databases AS d WITH (NOLOCK)
LEFT OUTER JOIN msdb.dbo.backupset AS bs WITH (NOLOCK)
ON bs.[database_name] = d.[name] 
AND bs.backup_finish_date > GETDATE()- 30
WHERE d.name <> N'tempdb'
GROUP BY ISNULL(d.[name], bs.[database_name]), d.recovery_model_desc, d.log_reuse_wait_desc, d.[name] 
ORDER BY d.recovery_model_desc, d.[name] OPTION (RECOMPILE);
------

-- This helps you spot runaway transaction logs and other issues with your backup schedule


-- Get SQL Server Agent jobs and Category information (Query 10) (SQL Server Agent Jobs)
SELECT sj.name AS [Job Name], sj.[description] AS [Job Description], SUSER_SNAME(sj.owner_sid) AS [Job Owner],
sj.date_created AS [Date Created], sj.[enabled] AS [Job Enabled], 
sj.notify_email_operator_id, sj.notify_level_email, sc.name AS [CategoryName],
s.[enabled] AS [Sched Enabled], js.next_run_date, js.next_run_time
FROM msdb.dbo.sysjobs AS sj WITH (NOLOCK)
INNER JOIN msdb.dbo.syscategories AS sc WITH (NOLOCK)
ON sj.category_id = sc.category_id
LEFT OUTER JOIN msdb.dbo.sysjobschedules AS js WITH (NOLOCK)
ON sj.job_id = js.job_id
LEFT OUTER JOIN msdb.dbo.sysschedules AS s WITH (NOLOCK)
ON js.schedule_id = s.schedule_id
ORDER BY sj.name OPTION (RECOMPILE);
------

-- Gives you some basic information about your SQL Server Agent jobs, who owns them and how they are configured
-- Look for Agent jobs that are not owned by sa
-- Look for jobs that have a notify_email_operator_id set to 0 (meaning no operator)
-- Look for jobs that have a notify_level_email set to 0 (meaning no e-mail is ever sent)
--
-- MSDN sysjobs documentation
-- https://bit.ly/2paDEOP 

-- SQL Server Maintenance Solution
-- https://bit.ly/1pgchQu  


-- Get SQL Server Agent Alert Information (Query 11) (SQL Server Agent Alerts)
SELECT name, event_source, message_id, severity, [enabled], has_notification, 
       delay_between_responses, occurrence_count, last_occurrence_date, last_occurrence_time
FROM msdb.dbo.sysalerts WITH (NOLOCK)
ORDER BY name OPTION (RECOMPILE);
------

-- Gives you some basic information about your SQL Server Agent Alerts 
-- (which are different from SQL Server Agent jobs)
-- Read more about Agent Alerts here: https://bit.ly/2Giz0Xf 



-- Windows information (Query 12) (Windows Info)
SELECT windows_release, windows_service_pack_level, 
       windows_sku, os_language_version
FROM sys.dm_os_windows_info WITH (NOLOCK) OPTION (RECOMPILE);
------

-- Gives you major OS version, Service Pack, Edition, and language info for the operating system
-- 10.0 is either Windows 10 or Windows Server 2016
-- 6.3 is either Windows 8.1 or Windows Server 2012 R2 
-- 6.2 is either Windows 8 or Windows Server 2012


-- Windows SKU codes
-- 4 is Enterprise Edition
-- 7 is Standard Server Edition
-- 8 is Datacenter Server Edition
-- 10 is Enterprise Server Edition
-- 48 is Professional Edition
-- 161 is Pro for Workstations

-- 1033 for os_language_version is US-English

-- SQL Server 2016 requires Windows Server 2012 or newer

-- Quick-Start Installation of SQL Server 2016
-- https://bit.ly/2qtxQ3G

-- Hardware and Software Requirements for Installing SQL Server 2016
-- https://bit.ly/2JJIUTl

-- Using SQL Server in Windows 8 and later versions of Windows operating system 
-- https://bit.ly/2F7Ax0P


-- SQL Server NUMA Node information  (Query 13) (SQL Server NUMA Info)
SELECT node_id, node_state_desc, memory_node_id, processor_group, online_scheduler_count, 
       idle_scheduler_count, active_worker_count, avg_load_balance, resource_monitor_state
FROM sys.dm_os_nodes WITH (NOLOCK) 
WHERE node_state_desc <> N'ONLINE DAC' OPTION (RECOMPILE);
------

-- Gives you some useful information about the composition and relative load on your NUMA nodes
-- You want to see an equal number of schedulers on each NUMA node
-- Watch out if SQL Server 2016 Standard Edition has been installed 
-- on a physical or virtual machine with more than four sockets or more than 24 physical cores

-- sys.dm_os_nodes (Transact-SQL)
-- https://bit.ly/2pn5Mw8

-- Balancing Your Available SQL Server Core Licenses Evenly Across NUMA Nodes
-- https://bit.ly/2vfC4Rq



-- Good basic information about OS memory amounts and state  (Query 14) (System Memory)
SELECT total_physical_memory_kb/1024 AS [Physical Memory (MB)], 
       available_physical_memory_kb/1024 AS [Available Memory (MB)], 
       total_page_file_kb/1024 AS [Total Page File (MB)], 
	   available_page_file_kb/1024 AS [Available Page File (MB)], 
	   system_cache_kb/1024 AS [System Cache (MB)],
       system_memory_state_desc AS [System Memory State]
FROM sys.dm_os_sys_memory WITH (NOLOCK) OPTION (RECOMPILE);
------

-- You want to see "Available physical memory is high" for System Memory State
-- This indicates that you are not under external memory pressure

-- Possible System Memory State values:
-- Available physical memory is high
-- Physical memory usage is steady
-- Available physical memory is low
-- Available physical memory is running low
-- Physical memory state is transitioning

-- sys.dm_os_sys_memory (Transact-SQL)
-- https://bit.ly/2pcV0xq



-- You can skip the next two queries if you know you don't have a clustered instance


-- Get information about your cluster nodes and their status  (Query 15) (Cluster Node Properties)
-- (if your database server is in a failover cluster)
SELECT NodeName, status_description, is_current_owner
FROM sys.dm_os_cluster_nodes WITH (NOLOCK) OPTION (RECOMPILE);
------

-- Knowing which node owns the cluster resources is critical
-- Especially when you are installing Windows or SQL Server updates
-- You will see no results if your instance is not clustered

-- Recommended hotfixes and updates for Windows Server 2012 R2-based failover clusters
-- https://bit.ly/1z5BfCw


-- Get information about any AlwaysOn AG cluster this instance is a part of (Query 16) (AlwaysOn AG Cluster)
SELECT cluster_name, quorum_type_desc, quorum_state_desc
FROM sys.dm_hadr_cluster WITH (NOLOCK) OPTION (RECOMPILE);
------

-- You will see no results if your instance is not using AlwaysOn AGs


-- Good overview of AG health and status (Query 17) (AlwaysOn AG Status)
SELECT ag.name AS [AG Name], ar.replica_server_name, ar.availability_mode_desc, adc.[database_name], 
       drs.is_local, drs.is_primary_replica, drs.synchronization_state_desc, drs.is_commit_participant, 
	   drs.synchronization_health_desc, drs.recovery_lsn, drs.truncation_lsn, drs.last_sent_lsn, 
	   drs.last_sent_time, drs.last_received_lsn, drs.last_received_time, drs.last_hardened_lsn, 
	   drs.last_hardened_time, drs.last_redone_lsn, drs.last_redone_time, drs.log_send_queue_size, 
	   drs.log_send_rate, drs.redo_queue_size, drs.redo_rate, drs.filestream_send_rate, 
	   drs.end_of_log_lsn, drs.last_commit_lsn, drs.last_commit_time, drs.database_state_desc 
FROM sys.dm_hadr_database_replica_states AS drs WITH (NOLOCK)
INNER JOIN sys.availability_databases_cluster AS adc WITH (NOLOCK)
ON drs.group_id = adc.group_id 
AND drs.group_database_id = adc.group_database_id
INNER JOIN sys.availability_groups AS ag WITH (NOLOCK)
ON ag.group_id = drs.group_id
INNER JOIN sys.availability_replicas AS ar WITH (NOLOCK)
ON drs.group_id = ar.group_id 
AND drs.replica_id = ar.replica_id
ORDER BY ag.name, ar.replica_server_name, adc.[database_name] OPTION (RECOMPILE);

-- You will see no results if your instance is not using AlwaysOn AGs

-- SQL Server 2016 � It Just Runs Faster: Always On Availability Groups Turbocharged
-- https://bit.ly/2dn1H6r


-- Hardware information from SQL Server 2016  (Query 18) (Hardware Info)
SELECT cpu_count AS [Logical CPU Count], scheduler_count, 
       hyperthread_ratio AS [Hyperthread Ratio],
       cpu_count/hyperthread_ratio AS [Physical CPU Count], 
       physical_memory_kb/1024 AS [Physical Memory (MB)], 
	   committed_kb/1024 AS [Committed Memory (MB)],
       committed_target_kb/1024 AS [Committed Target Memory (MB)],
       max_workers_count AS [Max Workers Count], 
	   affinity_type_desc AS [Affinity Type], 
       sqlserver_start_time AS [SQL Server Start Time],
	   DATEDIFF(hour, sqlserver_start_time, GETDATE()) AS [SQL Server Up Time (hrs)],
	   virtual_machine_type_desc AS [Virtual Machine Type],
	   softnuma_configuration_desc AS [Soft NUMA Configuration], 
	   sql_memory_model_desc -- New in SQL Server 2016
FROM sys.dm_os_sys_info WITH (NOLOCK) OPTION (RECOMPILE);
------

-- Gives you some good basic hardware information about your database server
-- Note: virtual_machine_type_desc of HYPERVISOR does not automatically mean you are running SQL Server inside of a VM
-- It merely indicates that you have a hypervisor running on your host

-- sys.dm_os_sys_info (Transact-SQL)
-- https://bit.ly/2pczOYs

-- Soft NUMA configuration was a new column for SQL Server 2016
-- OFF = Soft-NUMA feature is OFF
-- ON = SQL Server automatically determines the NUMA node sizes for Soft-NUMA
-- MANUAL = Manually configured soft-NUMA

-- Configure SQL Server to Use Soft-NUMA (SQL Server)
-- https://bit.ly/2HTpKJt

-- sql_memory_model_desc values (Added in SQL Server 2016 SP1)
-- CONVENTIONAL
-- LOCK_PAGES
-- LARGE_PAGES
   

-- Get System Manufacturer and model number from SQL Server Error log (Query 19) (System Manufacturer)
EXEC sys.xp_readerrorlog 0, 1, N'Manufacturer';
------ 

-- This can help you determine the capabilities and capacities of your database server
-- Can also be used to confirm if you are running in a VM
-- This query might take a few seconds if you have not recycled your error log recently
-- This query will return no results if your error log has been recycled since the instance was started


-- Get pvscsi info from Windows Registry  (Query 20) (PVSCSI Driver Parameters)
EXEC sys.xp_instance_regread N'HKEY_LOCAL_MACHINE', N'SYSTEM\CurrentControlSet\services\pvscsi\Parameters\Device', N'DriverParameter';
------

-- This is valid for VMware VMs
-- Recommended value for intensive I/O patterns from VMware is: RequestRingPages=32,MaxQueueDepth=254
-- https://kb.vmware.com/s/article/2053145



-- Get BIOS date from Windows Registry (Query 21) (BIOS Date)
EXEC sys.xp_instance_regread N'HKEY_LOCAL_MACHINE', N'HARDWARE\DESCRIPTION\System\BIOS', N'BiosReleaseDate';
------

-- Helps you understand whether the main system BIOS is up to date, and the possible age of the hardware
-- Not as useful for virtualization


-- Get processor description from Windows Registry  (Query 22) (Processor Description)
EXEC sys.xp_instance_regread N'HKEY_LOCAL_MACHINE', N'HARDWARE\DESCRIPTION\System\CentralProcessor\0', N'ProcessorNameString';
------

-- Gives you the model number and rated clock speed of your processor(s)
-- Your processors may be running at less than the rated clock speed due
-- to the Windows Power Plan or hardware power management

-- You can use CPU-Z to get your actual CPU core speed and a lot of other useful information
-- https://bit.ly/QhR6xF

-- You can learn more about processor selection for SQL Server by following this link
-- https://bit.ly/2F3aVlP



-- See if buffer pool extension (BPE) is enabled (Query 23) (BPE Configuration)
SELECT [path], state_description, current_size_in_kb, 
CAST(current_size_in_kb/1048576.0 AS DECIMAL(10,2)) AS [Size (GB)]
FROM sys.dm_os_buffer_pool_extension_configuration WITH (NOLOCK) OPTION (RECOMPILE);
------

-- BPE is available in both Standard Edition and Enterprise Edition
-- It is a more interesting feature for Standard Edition

-- Buffer Pool Extension to SSDs in SQL Server 2014
-- https://bit.ly/1bm08m8

-- Buffer Pool Extension
-- https://bit.ly/2oBuieO



-- Look at buffer descriptors to see BPE usage by database (Query 24) (BPE Usage) 
SELECT DB_NAME(database_id) AS [Database Name], COUNT(page_id) AS [Page Count],
CAST(COUNT(*)/128.0 AS DECIMAL(10, 2)) AS [Buffer size(MB)], 
AVG(read_microsec) AS [Avg Read Time (microseconds)]
FROM sys.dm_os_buffer_descriptors WITH (NOLOCK)
WHERE database_id <> 32767
AND is_in_bpool_extension = 1
GROUP BY DB_NAME(database_id) 
ORDER BY [Buffer size(MB)] DESC OPTION (RECOMPILE);
------

-- You will see no results if BPE is not enabled or if there is no BPE usage


-- Get information on location, time and size of any memory dumps from SQL Server  (Query 25) (Memory Dump Info)
SELECT [filename], creation_time, size_in_bytes/1048576.0 AS [Size (MB)]
FROM sys.dm_server_memory_dumps WITH (NOLOCK) 
ORDER BY creation_time DESC OPTION (RECOMPILE);
------

-- This will not return any rows if you have 
-- not had any memory dumps (which is a good thing)

-- sys.dm_server_memory_dumps (Transact-SQL)
-- https://bit.ly/2elwWll



-- Look at Suspect Pages table (Query 26) (Suspect Pages)
SELECT DB_NAME(database_id) AS [Database Name], [file_id], page_id, 
       event_type, error_count, last_update_date 
FROM msdb.dbo.suspect_pages WITH (NOLOCK)
ORDER BY database_id OPTION (RECOMPILE);
------

-- event_type value descriptions
-- 1 = 823 error caused by an operating system CRC error
--     or 824 error other than a bad checksum or a torn page (for example, a bad page ID)
-- 2 = Bad checksum
-- 3 = Torn page
-- 4 = Restored (The page was restored after it was marked bad)
-- 5 = Repaired (DBCC repaired the page)
-- 7 = Deallocated by DBCC

-- Ideally, this query returns no results. The table is limited to 1000 rows.
-- If you do get results here, you should do further investigation to determine the root cause

-- Manage the suspect_pages Table
-- https://bit.ly/2Fvr1c9


-- Get number of data files in tempdb database (Query 27) (TempDB Data Files)
EXEC sys.xp_readerrorlog 0, 1, N'The tempdb database has';
------

-- Get the number of data files in the tempdb database
-- 4-8 data files that are all the same size is a good starting point
-- This query will return no results if your error log has been recycled since the instance was last started


-- File names and paths for all user and system databases on instance  (Query 28) (Database Filenames and Paths)
SELECT DB_NAME([database_id]) AS [Database Name], 
       [file_id], [name], physical_name, [type_desc], state_desc,
	   is_percent_growth, growth,
	   CONVERT(bigint, growth/128.0) AS [Growth in MB], 
       CONVERT(bigint, size/128.0) AS [Total Size in MB]
FROM sys.master_files WITH (NOLOCK)
ORDER BY DB_NAME([database_id]), [file_id] OPTION (RECOMPILE);
------

-- Things to look at:
-- Are data files and log files on different drives?
-- Is everything on the C: drive?
-- Is tempdb on dedicated drives?
-- Is there only one tempdb data file?
-- Are all of the tempdb data files the same size?
-- Are there multiple data files for user databases?
-- Is percent growth enabled for any files (which is bad)?


-- Volume info for all LUNS that have database files on the current instance (Query 29) (Volume Info)
SELECT DISTINCT vs.volume_mount_point, vs.file_system_type, vs.logical_volume_name, 
CONVERT(DECIMAL(18,2), vs.total_bytes/1073741824.0) AS [Total Size (GB)],
CONVERT(DECIMAL(18,2), vs.available_bytes/1073741824.0) AS [Available Size (GB)],  
CONVERT(DECIMAL(18,2), vs.available_bytes * 1. / vs.total_bytes * 100.) AS [Space Free %],
vs.supports_compression, vs.is_compressed, 
vs.supports_sparse_files, vs.supports_alternate_streams
FROM sys.master_files AS f WITH (NOLOCK)
CROSS APPLY sys.dm_os_volume_stats(f.database_id, f.[file_id]) AS vs 
ORDER BY vs.volume_mount_point OPTION (RECOMPILE);
------

-- Shows you the total and free space on the LUNs where you have database files
-- Being low on free space can negatively affect performance

-- sys.dm_os_volume_stats (Transact-SQL)
-- https://bit.ly/2oBPNNr



-- Drive level latency information (Query 30) (Drive Level Latency)
-- Based on code from Jimmy May
SELECT tab.[Drive], tab.volume_mount_point AS [Volume Mount Point], 
	CASE 
		WHEN num_of_reads = 0 THEN 0 
		ELSE (io_stall_read_ms/num_of_reads) 
	END AS [Read Latency],
	CASE 
		WHEN num_of_writes = 0 THEN 0 
		ELSE (io_stall_write_ms/num_of_writes) 
	END AS [Write Latency],
	CASE 
		WHEN (num_of_reads = 0 AND num_of_writes = 0) THEN 0 
		ELSE (io_stall/(num_of_reads + num_of_writes)) 
	END AS [Overall Latency],
	CASE 
		WHEN num_of_reads = 0 THEN 0 
		ELSE (num_of_bytes_read/num_of_reads) 
	END AS [Avg Bytes/Read],
	CASE 
		WHEN num_of_writes = 0 THEN 0 
		ELSE (num_of_bytes_written/num_of_writes) 
	END AS [Avg Bytes/Write],
	CASE 
		WHEN (num_of_reads = 0 AND num_of_writes = 0) THEN 0 
		ELSE ((num_of_bytes_read + num_of_bytes_written)/(num_of_reads + num_of_writes)) 
	END AS [Avg Bytes/Transfer]
FROM (SELECT LEFT(UPPER(mf.physical_name), 2) AS Drive, SUM(num_of_reads) AS num_of_reads,
	         SUM(io_stall_read_ms) AS io_stall_read_ms, SUM(num_of_writes) AS num_of_writes,
	         SUM(io_stall_write_ms) AS io_stall_write_ms, SUM(num_of_bytes_read) AS num_of_bytes_read,
	         SUM(num_of_bytes_written) AS num_of_bytes_written, SUM(io_stall) AS io_stall, vs.volume_mount_point 
      FROM sys.dm_io_virtual_file_stats(NULL, NULL) AS vfs
      INNER JOIN sys.master_files AS mf WITH (NOLOCK)
      ON vfs.database_id = mf.database_id AND vfs.file_id = mf.file_id
	  CROSS APPLY sys.dm_os_volume_stats(mf.database_id, mf.[file_id]) AS vs 
      GROUP BY LEFT(UPPER(mf.physical_name), 2), vs.volume_mount_point) AS tab
ORDER BY [Overall Latency] OPTION (RECOMPILE);
------

-- Shows you the drive-level latency for reads and writes, in milliseconds
-- Latency above 30-40ms is usually a problem
-- These latency numbers include all file activity against all SQL Server 
-- database files on each drive since SQL Server was last started


-- Calculates average stalls per read, per write, and per total input/output for each database file  (Query 31) (IO Latency by File)
SELECT DB_NAME(fs.database_id) AS [Database Name], CAST(fs.io_stall_read_ms/(1.0 + fs.num_of_reads) AS NUMERIC(10,1)) AS [avg_read_latency_ms],
CAST(fs.io_stall_write_ms/(1.0 + fs.num_of_writes) AS NUMERIC(10,1)) AS [avg_write_latency_ms],
CAST((fs.io_stall_read_ms + fs.io_stall_write_ms)/(1.0 + fs.num_of_reads + fs.num_of_writes) AS NUMERIC(10,1)) AS [avg_io_latency_ms],
CONVERT(DECIMAL(18,2), mf.size/128.0) AS [File Size (MB)], mf.physical_name, mf.type_desc, fs.io_stall_read_ms, fs.num_of_reads, 
fs.io_stall_write_ms, fs.num_of_writes, fs.io_stall_read_ms + fs.io_stall_write_ms AS [io_stalls], fs.num_of_reads + fs.num_of_writes AS [total_io],
io_stall_queued_read_ms AS [Resource Governor Total Read IO Latency (ms)], io_stall_queued_write_ms AS [Resource Governor Total Write IO Latency (ms)] 
FROM sys.dm_io_virtual_file_stats(null,null) AS fs
INNER JOIN sys.master_files AS mf WITH (NOLOCK)
ON fs.database_id = mf.database_id
AND fs.[file_id] = mf.[file_id]
ORDER BY avg_io_latency_ms DESC OPTION (RECOMPILE);
------

-- Helps determine which database files on the entire instance have the most I/O bottlenecks
-- This can help you decide whether certain LUNs are overloaded and whether you might
-- want to move some files to a different location or perhaps improve your I/O performance
-- These latency numbers include all file activity against each SQL Server 
-- database file since SQL Server was last started


-- Look for I/O requests taking longer than 15 seconds in the six most recent SQL Server Error Logs (Query 32) (IO Warnings)
CREATE TABLE #IOWarningResults(LogDate datetime, ProcessInfo sysname, LogText nvarchar(1000));

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 0, 1, N'taking longer than 15 seconds';

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 1, 1, N'taking longer than 15 seconds';

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 2, 1, N'taking longer than 15 seconds';

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 3, 1, N'taking longer than 15 seconds';

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 4, 1, N'taking longer than 15 seconds';

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 5, 1, N'taking longer than 15 seconds';

SELECT LogDate, ProcessInfo, LogText
FROM #IOWarningResults
ORDER BY LogDate DESC;

DROP TABLE #IOWarningResults;
------  

-- Finding 15 second I/O warnings in the SQL Server Error Log is useful evidence of
-- poor I/O performance (which might have many different causes)
-- Look to see if you see any patterns in the results (same files, same drives, same time of day, etc.)

-- Diagnostics in SQL Server help detect stalled and stuck I/O operations
-- https://bit.ly/2qtaw73


-- Resource Governor Resource Pool information (Query 33) (RG Resource Pools)
SELECT pool_id, [Name], statistics_start_time,
       min_memory_percent, max_memory_percent,  
       max_memory_kb/1024 AS [max_memory_mb],  
       used_memory_kb/1024 AS [used_memory_mb],   
       target_memory_kb/1024 AS [target_memory_mb],
	   min_iops_per_volume, max_iops_per_volume
FROM sys.dm_resource_governor_resource_pools WITH (NOLOCK)
OPTION (RECOMPILE);
------

-- sys.dm_resource_governor_resource_pools (Transact-SQL)
-- https://bit.ly/2MVU0Vy



-- Recovery model, log reuse wait description, log file size, log usage size  (Query 34) (Database Properties)
-- and compatibility level for all databases on instance
SELECT db.[name] AS [Database Name], SUSER_SNAME(db.owner_sid) AS [Database Owner], db.recovery_model_desc AS [Recovery Model], 
db.state_desc, db.containment_desc, db.log_reuse_wait_desc AS [Log Reuse Wait Description], 
CONVERT(DECIMAL(18,2), ls.cntr_value/1024.0) AS [Log Size (MB)], CONVERT(DECIMAL(18,2), lu.cntr_value/1024.0) AS [Log Used (MB)],
CAST(CAST(lu.cntr_value AS FLOAT) / CAST(ls.cntr_value AS FLOAT)AS DECIMAL(18,2)) * 100 AS [Log Used %], 
db.[compatibility_level] AS [DB Compatibility Level], 
db.is_mixed_page_allocation_on, db.page_verify_option_desc AS [Page Verify Option], 
db.is_auto_create_stats_on, db.is_auto_update_stats_on, db.is_auto_update_stats_async_on, db.is_parameterization_forced, 
db.snapshot_isolation_state_desc, db.is_read_committed_snapshot_on, db.is_auto_close_on, db.is_auto_shrink_on, 
db.target_recovery_time_in_seconds, db.is_cdc_enabled, db.is_published, db.is_distributor, db.is_encrypted,
db.group_database_id, db.replica_id,db.is_memory_optimized_elevate_to_snapshot_on, 
db.delayed_durability_desc, db.is_auto_create_stats_incremental_on,
db.is_query_store_on, db.is_sync_with_backup, 
db.is_supplemental_logging_enabled, db.is_remote_data_archive_enabled,
db.is_encrypted, de.encryption_state, de.percent_complete, de.key_algorithm, de.key_length      
FROM sys.databases AS db WITH (NOLOCK)
INNER JOIN sys.dm_os_performance_counters AS lu WITH (NOLOCK)
ON db.name = lu.instance_name
INNER JOIN sys.dm_os_performance_counters AS ls WITH (NOLOCK)
ON db.name = ls.instance_name
LEFT OUTER JOIN sys.dm_database_encryption_keys AS de WITH (NOLOCK)
ON db.database_id = de.database_id
WHERE lu.counter_name LIKE N'Log File(s) Used Size (KB)%' 
AND ls.counter_name LIKE N'Log File(s) Size (KB)%'
AND ls.cntr_value > 0 
ORDER BY db.[name] OPTION (RECOMPILE);
------

-- Things to look at:
-- How many databases are on the instance?
-- What recovery models are they using?
-- What is the log reuse wait description?
-- How full are the transaction logs?
-- What compatibility level are the databases on? 
-- What is the Page Verify Option? (should be CHECKSUM)
-- Is Auto Update Statistics Asynchronously enabled?
-- Is Delayed Durability enabled
-- Make sure auto_shrink and auto_close are not enabled!

-- is_mixed_page_allocation_on is a new property for SQL Server 2016. Equivalent to TF 1118 for a user database
-- SQL Server 2016: Changes in default behavior for autogrow and allocations for tempdb and user databases
-- https://bit.ly/2evRZSR

-- A non-zero value for target_recovery_time_in_seconds means that indirect checkpoint is enabled 
-- If the setting has a zero value it indicates that automatic checkpoint is enabled

-- Changes in SQL Server 2016 Checkpoint Behavior
-- https://bit.ly/2pdggk3


-- Missing Indexes for all databases by Index Advantage  (Query 35) (Missing Indexes All Databases)
SELECT CONVERT(decimal(18,2), user_seeks * avg_total_user_cost * (avg_user_impact * 0.01)) AS [index_advantage],
FORMAT(migs.last_user_seek, 'yyyy-MM-dd HH:mm:ss') AS [last_user_seek], 
mid.[statement] AS [Database.Schema.Table],
COUNT(1) OVER(PARTITION BY mid.[statement]) AS [missing_indexes_for_table],
COUNT(1) OVER(PARTITION BY mid.[statement], equality_columns) AS [similar_missing_indexes_for_table],
mid.equality_columns, mid.inequality_columns, mid.included_columns,
migs.unique_compiles, migs.user_seeks, 
CONVERT(decimal(18,2), migs.avg_total_user_cost) AS [avg_total_user_cost], migs.avg_user_impact 
FROM sys.dm_db_missing_index_group_stats AS migs WITH (NOLOCK)
INNER JOIN sys.dm_db_missing_index_groups AS mig WITH (NOLOCK)
ON migs.group_handle = mig.index_group_handle
INNER JOIN sys.dm_db_missing_index_details AS mid WITH (NOLOCK)
ON mig.index_handle = mid.index_handle
ORDER BY index_advantage DESC OPTION (RECOMPILE);
------

-- Getting missing index information for all of the databases on the instance is very useful
-- Look at last user seek time, number of user seeks to help determine source and importance
-- Also look at avg_user_impact and avg_total_user_cost to help determine importance
-- SQL Server is overly eager to add included columns, so beware
-- Do not just blindly add indexes that show up from this query!!!

-- SQL Server Index Design Guide
-- https://bit.ly/2qtZr4N



-- Get VLF Counts for all databases on the instance (Query 36) (VLF Counts)
-- (adapted from Michelle Ufford) 
CREATE TABLE #VLFInfo (RecoveryUnitID int, FileID  int,
					   FileSize bigint, StartOffset bigint,
					   FSeqNo      bigint, [Status]    bigint,
					   Parity      bigint, CreateLSN   numeric(38));
	 
CREATE TABLE #VLFCountResults(DatabaseName sysname, VLFCount int);
	 
EXEC sp_MSforeachdb N'Use [?]; 

				INSERT INTO #VLFInfo 
				EXEC sp_executesql N''DBCC LOGINFO([?])''; 
	 
				INSERT INTO #VLFCountResults 
				SELECT DB_NAME(), COUNT(*) 
				FROM #VLFInfo; 

				TRUNCATE TABLE #VLFInfo;'
	 
SELECT DatabaseName, VLFCount  
FROM #VLFCountResults
ORDER BY VLFCount DESC;
	 
DROP TABLE #VLFInfo;
DROP TABLE #VLFCountResults;
------

-- High VLF counts can affect write performance to the log file
-- and they can make full database restores and crash recovery take much longer
-- Try to keep your VLF counts under 200 in most cases (depending on log file size)

-- Important change to VLF creation algorithm in SQL Server 2014
-- https://bit.ly/2Hsjbg4

-- SQL Server Transaction Log Architecture and Management Guide
-- https://bit.ly/2JjmQRZ




-- Get CPU utilization by database (Query 37) (CPU Usage by Database)
WITH DB_CPU_Stats
AS
(SELECT pa.DatabaseID, DB_Name(pa.DatabaseID) AS [Database Name], SUM(qs.total_worker_time/1000) AS [CPU_Time_Ms]
 FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
 CROSS APPLY (SELECT CONVERT(int, value) AS [DatabaseID] 
              FROM sys.dm_exec_plan_attributes(qs.plan_handle)
              WHERE attribute = N'dbid') AS pa
 GROUP BY DatabaseID)
SELECT ROW_NUMBER() OVER(ORDER BY [CPU_Time_Ms] DESC) AS [CPU Rank],
       [Database Name], [CPU_Time_Ms] AS [CPU Time (ms)], 
       CAST([CPU_Time_Ms] * 1.0 / SUM([CPU_Time_Ms]) OVER() * 100.0 AS DECIMAL(5, 2)) AS [CPU Percent]
FROM DB_CPU_Stats
WHERE DatabaseID <> 32767 -- ResourceDB
ORDER BY [CPU Rank] OPTION (RECOMPILE);
------

-- Helps determine which database is using the most CPU resources on the instance


-- Get I/O utilization by database (Query 38) (IO Usage By Database)
WITH Aggregate_IO_Statistics
AS (SELECT DB_NAME(database_id) AS [Database Name],
    CAST(SUM(num_of_bytes_read + num_of_bytes_written) / 1048576 AS DECIMAL(12, 2)) AS [ioTotalMB],
    CAST(SUM(num_of_bytes_read ) / 1048576 AS DECIMAL(12, 2)) AS [ioReadMB],
    CAST(SUM(num_of_bytes_written) / 1048576 AS DECIMAL(12, 2)) AS [ioWriteMB]
    FROM sys.dm_io_virtual_file_stats(NULL, NULL) AS [DM_IO_STATS]
    GROUP BY database_id)
SELECT ROW_NUMBER() OVER (ORDER BY ioTotalMB DESC) AS [I/O Rank],
        [Database Name], ioTotalMB AS [Total I/O (MB)],
        CAST(ioTotalMB / SUM(ioTotalMB) OVER () * 100.0 AS DECIMAL(5, 2)) AS [Total I/O %],
        ioReadMB AS [Read I/O (MB)], 
		CAST(ioReadMB / SUM(ioReadMB) OVER () * 100.0 AS DECIMAL(5, 2)) AS [Read I/O %],
        ioWriteMB AS [Write I/O (MB)], 
		CAST(ioWriteMB / SUM(ioWriteMB) OVER () * 100.0 AS DECIMAL(5, 2)) AS [Write I/O %]
FROM Aggregate_IO_Statistics
ORDER BY [I/O Rank] OPTION (RECOMPILE);
------

-- Helps determine which database is using the most I/O resources on the instance
-- These numbers are cumulative since the last service restart
-- They include all I/O activity, not just the nominal I/O workload


-- Get total buffer usage by database for current instance  (Query 39) (Total Buffer Usage by Database)
-- This make take some time to run on a busy instance
WITH AggregateBufferPoolUsage
AS
(SELECT DB_NAME(database_id) AS [Database Name],
CAST(COUNT(*) * 8/1024.0 AS DECIMAL (10,2))  AS [CachedSize]
FROM sys.dm_os_buffer_descriptors WITH (NOLOCK)
WHERE database_id <> 32767 -- ResourceDB
GROUP BY DB_NAME(database_id))
SELECT ROW_NUMBER() OVER(ORDER BY CachedSize DESC) AS [Buffer Pool Rank], [Database Name], CachedSize AS [Cached Size (MB)],
       CAST(CachedSize / SUM(CachedSize) OVER() * 100.0 AS DECIMAL(5,2)) AS [Buffer Pool Percent]
FROM AggregateBufferPoolUsage
ORDER BY [Buffer Pool Rank] OPTION (RECOMPILE);
------

-- Tells you how much memory (in the buffer pool) 
-- is being used by each database on the instance


-- Clear Wait Stats with this command
-- DBCC SQLPERF('sys.dm_os_wait_stats', CLEAR);

-- Isolate top waits for server instance since last restart or wait statistics clear  (Query 40) (Top Waits)
WITH [Waits] 
AS (SELECT wait_type, wait_time_ms/ 1000.0 AS [WaitS],
          (wait_time_ms - signal_wait_time_ms) / 1000.0 AS [ResourceS],
           signal_wait_time_ms / 1000.0 AS [SignalS],
           waiting_tasks_count AS [WaitCount],
           100.0 *  wait_time_ms / SUM (wait_time_ms) OVER() AS [Percentage],
           ROW_NUMBER() OVER(ORDER BY wait_time_ms DESC) AS [RowNum]
    FROM sys.dm_os_wait_stats WITH (NOLOCK)
    WHERE [wait_type] NOT IN (
        N'BROKER_EVENTHANDLER', N'BROKER_RECEIVE_WAITFOR', N'BROKER_TASK_STOP',
		N'BROKER_TO_FLUSH', N'BROKER_TRANSMITTER', N'CHECKPOINT_QUEUE',
        N'CHKPT', N'CLR_AUTO_EVENT', N'CLR_MANUAL_EVENT', N'CLR_SEMAPHORE',
        N'DBMIRROR_DBM_EVENT', N'DBMIRROR_EVENTS_QUEUE', N'DBMIRROR_WORKER_QUEUE',
		N'DBMIRRORING_CMD', N'DIRTY_PAGE_POLL', N'DISPATCHER_QUEUE_SEMAPHORE',
        N'EXECSYNC', N'FSAGENT', N'FT_IFTS_SCHEDULER_IDLE_WAIT', N'FT_IFTSHC_MUTEX',
        N'HADR_CLUSAPI_CALL', N'HADR_FILESTREAM_IOMGR_IOCOMPLETION', N'HADR_LOGCAPTURE_WAIT', 
		N'HADR_NOTIFICATION_DEQUEUE', N'HADR_TIMER_TASK', N'HADR_WORK_QUEUE',
        N'KSOURCE_WAKEUP', N'LAZYWRITER_SLEEP', N'LOGMGR_QUEUE', 
		N'MEMORY_ALLOCATION_EXT', N'ONDEMAND_TASK_QUEUE',
		N'PARALLEL_REDO_DRAIN_WORKER', N'PARALLEL_REDO_LOG_CACHE', N'PARALLEL_REDO_TRAN_LIST',
		N'PARALLEL_REDO_WORKER_SYNC', N'PARALLEL_REDO_WORKER_WAIT_WORK',
		N'PREEMPTIVE_HADR_LEASE_MECHANISM', N'PREEMPTIVE_SP_SERVER_DIAGNOSTICS',
		N'PREEMPTIVE_OS_LIBRARYOPS', N'PREEMPTIVE_OS_COMOPS', N'PREEMPTIVE_OS_CRYPTOPS',
		N'PREEMPTIVE_OS_PIPEOPS', N'PREEMPTIVE_OS_AUTHENTICATIONOPS',
		N'PREEMPTIVE_OS_GENERICOPS', N'PREEMPTIVE_OS_VERIFYTRUST',
		N'PREEMPTIVE_OS_FILEOPS', N'PREEMPTIVE_OS_DEVICEOPS', N'PREEMPTIVE_OS_QUERYREGISTRY',
		N'PREEMPTIVE_OS_WRITEFILE',
		N'PREEMPTIVE_XE_CALLBACKEXECUTE', N'PREEMPTIVE_XE_DISPATCHER',
		N'PREEMPTIVE_XE_GETTARGETSTATE', N'PREEMPTIVE_XE_SESSIONCOMMIT',
		N'PREEMPTIVE_XE_TARGETINIT', N'PREEMPTIVE_XE_TARGETFINALIZE',
        N'PWAIT_ALL_COMPONENTS_INITIALIZED', N'PWAIT_DIRECTLOGCONSUMER_GETNEXT',
		N'QDS_PERSIST_TASK_MAIN_LOOP_SLEEP',
		N'QDS_ASYNC_QUEUE',
        N'QDS_CLEANUP_STALE_QUERIES_TASK_MAIN_LOOP_SLEEP', N'REQUEST_FOR_DEADLOCK_SEARCH',
		N'RESOURCE_QUEUE', N'SERVER_IDLE_CHECK', N'SLEEP_BPOOL_FLUSH', N'SLEEP_DBSTARTUP',
		N'SLEEP_DCOMSTARTUP', N'SLEEP_MASTERDBREADY', N'SLEEP_MASTERMDREADY',
        N'SLEEP_MASTERUPGRADED', N'SLEEP_MSDBSTARTUP', N'SLEEP_SYSTEMTASK', N'SLEEP_TASK',
        N'SLEEP_TEMPDBSTARTUP', N'SNI_HTTP_ACCEPT', N'SP_SERVER_DIAGNOSTICS_SLEEP',
		N'SQLTRACE_BUFFER_FLUSH', N'SQLTRACE_INCREMENTAL_FLUSH_SLEEP', N'SQLTRACE_WAIT_ENTRIES',
		N'WAIT_FOR_RESULTS', N'WAITFOR', N'WAITFOR_TASKSHUTDOWN', N'WAIT_XTP_HOST_WAIT',
		N'WAIT_XTP_OFFLINE_CKPT_NEW_LOG', N'WAIT_XTP_CKPT_CLOSE', N'WAIT_XTP_RECOVERY',
		N'XE_BUFFERMGR_ALLPROCESSED_EVENT', N'XE_DISPATCHER_JOIN',
        N'XE_DISPATCHER_WAIT', N'XE_LIVE_TARGET_TVF', N'XE_TIMER_EVENT')
    AND waiting_tasks_count > 0)
SELECT
    MAX (W1.wait_type) AS [WaitType],
	CAST (MAX (W1.Percentage) AS DECIMAL (5,2)) AS [Wait Percentage],
	CAST ((MAX (W1.WaitS) / MAX (W1.WaitCount)) AS DECIMAL (16,4)) AS [AvgWait_Sec],
    CAST ((MAX (W1.ResourceS) / MAX (W1.WaitCount)) AS DECIMAL (16,4)) AS [AvgRes_Sec],
    CAST ((MAX (W1.SignalS) / MAX (W1.WaitCount)) AS DECIMAL (16,4)) AS [AvgSig_Sec], 
    CAST (MAX (W1.WaitS) AS DECIMAL (16,2)) AS [Wait_Sec],
    CAST (MAX (W1.ResourceS) AS DECIMAL (16,2)) AS [Resource_Sec],
    CAST (MAX (W1.SignalS) AS DECIMAL (16,2)) AS [Signal_Sec],
    MAX (W1.WaitCount) AS [Wait Count],
	CAST (N'https://www.sqlskills.com/help/waits/' + W1.wait_type AS XML) AS [Help/Info URL]
FROM Waits AS W1
INNER JOIN Waits AS W2
ON W2.RowNum <= W1.RowNum
GROUP BY W1.RowNum, W1.wait_type
HAVING SUM (W2.Percentage) - MAX (W1.Percentage) < 99 -- percentage threshold
OPTION (RECOMPILE);
------

-- Cumulative wait stats are not as useful on an idle instance that is not under load or performance pressure

-- SQL Server Wait Types Library (Paul Randal)
-- https://bit.ly/2ePzYO2

-- The SQL Server Wait Type Repository
-- https://bit.ly/1afzfjC

-- Wait statistics, or please tell me where it hurts
-- https://bit.ly/2wsQHQE

-- SQL Server 2005 Performance Tuning using the Waits and Queues
-- https://bit.ly/1o2NFoF

-- sys.dm_os_wait_stats (Transact-SQL)
-- https://bit.ly/2Hjq9Yl



-- Get a count of SQL connections by IP address (Query 41) (Connection Counts by IP Address)
SELECT ec.client_net_address, es.[program_name], es.[host_name], es.login_name, 
COUNT(ec.session_id) AS [connection count] 
FROM sys.dm_exec_sessions AS es WITH (NOLOCK) 
INNER JOIN sys.dm_exec_connections AS ec WITH (NOLOCK) 
ON es.session_id = ec.session_id 
GROUP BY ec.client_net_address, es.[program_name], es.[host_name], es.login_name  
ORDER BY ec.client_net_address, es.[program_name] OPTION (RECOMPILE);
------

-- This helps you figure where your database load is coming from
-- and verifies connectivity from other machines

-- Solving Connectivity errors to SQL Server
-- https://bit.ly/2EgzoD0



-- Get Average Task Counts (run multiple times)  (Query 42) (Avg Task Counts)
SELECT AVG(current_tasks_count) AS [Avg Task Count], 
AVG(work_queue_count) AS [Avg Work Queue Count],
AVG(runnable_tasks_count) AS [Avg Runnable Task Count],
AVG(pending_disk_io_count) AS [Avg Pending DiskIO Count]
FROM sys.dm_os_schedulers WITH (NOLOCK)
WHERE scheduler_id < 255 OPTION (RECOMPILE);
------

-- Sustained values above 10 suggest further investigation in that area
-- High Avg Task Counts are often caused by blocking/deadlocking or other resource contention

-- Sustained values above 1 suggest further investigation in that area
-- High Avg Runnable Task Counts are a good sign of CPU pressure
-- High Avg Pending DiskIO Counts are a sign of disk pressure

-- How to Do Some Very Basic SQL Server Monitoring
-- https://bit.ly/2q3Btgt



-- Detect blocking (run multiple times)  (Query 43) (Detect Blocking)
SELECT t1.resource_type AS [lock type], DB_NAME(resource_database_id) AS [database],
t1.resource_associated_entity_id AS [blk object],t1.request_mode AS [lock req],  -- lock requested
t1.request_session_id AS [waiter sid], t2.wait_duration_ms AS [wait time],       -- spid of waiter  
(SELECT [text] FROM sys.dm_exec_requests AS r WITH (NOLOCK)                      -- get sql for waiter
CROSS APPLY sys.dm_exec_sql_text(r.[sql_handle]) 
WHERE r.session_id = t1.request_session_id) AS [waiter_batch],
(SELECT SUBSTRING(qt.[text],r.statement_start_offset/2, 
    (CASE WHEN r.statement_end_offset = -1 
    THEN LEN(CONVERT(nvarchar(max), qt.[text])) * 2 
    ELSE r.statement_end_offset END - r.statement_start_offset)/2) 
FROM sys.dm_exec_requests AS r WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(r.[sql_handle]) AS qt
WHERE r.session_id = t1.request_session_id) AS [waiter_stmt],					-- statement blocked
t2.blocking_session_id AS [blocker sid],										-- spid of blocker
(SELECT [text] FROM sys.sysprocesses AS p										-- get sql for blocker
CROSS APPLY sys.dm_exec_sql_text(p.[sql_handle]) 
WHERE p.spid = t2.blocking_session_id) AS [blocker_batch]
FROM sys.dm_tran_locks AS t1 WITH (NOLOCK)
INNER JOIN sys.dm_os_waiting_tasks AS t2 WITH (NOLOCK)
ON t1.lock_owner_address = t2.resource_address OPTION (RECOMPILE);
------

-- Helps troubleshoot blocking and deadlocking issues
-- The results will change from second to second on a busy system
-- You should run this query multiple times when you see signs of blocking



-- Get CPU Utilization History for last 256 minutes (in one minute intervals)  (Query 44) (CPU Utilization History)
DECLARE @ts_now bigint = (SELECT cpu_ticks/(cpu_ticks/ms_ticks) FROM sys.dm_os_sys_info WITH (NOLOCK)); 

SELECT TOP(256) SQLProcessUtilization AS [SQL Server Process CPU Utilization], 
               SystemIdle AS [System Idle Process], 
               100 - SystemIdle - SQLProcessUtilization AS [Other Process CPU Utilization], 
               DATEADD(ms, -1 * (@ts_now - [timestamp]), GETDATE()) AS [Event Time] 
FROM (SELECT record.value('(./Record/@id)[1]', 'int') AS record_id, 
			record.value('(./Record/SchedulerMonitorEvent/SystemHealth/SystemIdle)[1]', 'int') 
			AS [SystemIdle], 
			record.value('(./Record/SchedulerMonitorEvent/SystemHealth/ProcessUtilization)[1]', 'int') 
			AS [SQLProcessUtilization], [timestamp] 
	  FROM (SELECT [timestamp], CONVERT(xml, record) AS [record] 
			FROM sys.dm_os_ring_buffers WITH (NOLOCK)
			WHERE ring_buffer_type = N'RING_BUFFER_SCHEDULER_MONITOR' 
			AND record LIKE N'%<SystemHealth>%') AS x) AS y 
ORDER BY record_id DESC OPTION (RECOMPILE);
------

-- Look at the trend over the entire period 
-- Also look at high sustained 'Other Process' CPU Utilization values
-- Note: This query sometimes gives inaccurate results (negative values)
-- on high core count (> 64 cores) systems


-- Get top total worker time queries for entire instance (Query 45) (Top Worker Time Queries)
SELECT TOP(50) DB_NAME(t.[dbid]) AS [Database Name], 
REPLACE(REPLACE(LEFT(t.[text], 255), CHAR(10),''), CHAR(13),'') AS [Short Query Text],  
qs.total_worker_time AS [Total Worker Time], qs.min_worker_time AS [Min Worker Time],
qs.total_worker_time/qs.execution_count AS [Avg Worker Time], 
qs.max_worker_time AS [Max Worker Time], 
qs.min_elapsed_time AS [Min Elapsed Time], 
qs.total_elapsed_time/qs.execution_count AS [Avg Elapsed Time], 
qs.max_elapsed_time AS [Max Elapsed Time],
qs.min_logical_reads AS [Min Logical Reads],
qs.total_logical_reads/qs.execution_count AS [Avg Logical Reads],
qs.max_logical_reads AS [Max Logical Reads], 
qs.execution_count AS [Execution Count],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index], 
qs.creation_time AS [Creation Time]
--,t.[text] AS [Query Text], qp.query_plan AS [Query Plan] -- uncomment out these columns if not copying results to Excel
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(plan_handle) AS t 
CROSS APPLY sys.dm_exec_query_plan(plan_handle) AS qp 
ORDER BY qs.total_worker_time DESC OPTION (RECOMPILE);
------


-- Helps you find the most expensive queries from a CPU perspective across the entire instance
-- Can also help track down parameter sniffing issues



-- Page Life Expectancy (PLE) value for each NUMA node in current instance  (Query 46) (PLE by NUMA Node)
SELECT @@SERVERNAME AS [Server Name], RTRIM([object_name]) AS [Object Name], instance_name, cntr_value AS [Page Life Expectancy]
FROM sys.dm_os_performance_counters WITH (NOLOCK)
WHERE [object_name] LIKE N'%Buffer Node%' -- Handles named instances
AND counter_name = N'Page life expectancy' OPTION (RECOMPILE);
------

-- PLE is a good measurement of internal memory pressure
-- Higher PLE is better. Watch the trend over time, not the absolute value
-- This will only return one row for non-NUMA systems

-- Page Life Expectancy isn�t what you think�
-- https://bit.ly/2EgynLa


-- Memory Grants Pending value for current instance  (Query 47) (Memory Grants Pending)
SELECT @@SERVERNAME AS [Server Name], RTRIM([object_name]) AS [Object Name], cntr_value AS [Memory Grants Pending]                                                                                                       
FROM sys.dm_os_performance_counters WITH (NOLOCK)
WHERE [object_name] LIKE N'%Memory Manager%' -- Handles named instances
AND counter_name = N'Memory Grants Pending' OPTION (RECOMPILE);
------

-- Run multiple times, and run periodically if you suspect you are under memory pressure
-- Memory Grants Pending above zero for a sustained period is a very strong indicator of internal memory pressure


-- Memory Clerk Usage for instance  (Query 48) (Memory Clerk Usage)
-- Look for high value for CACHESTORE_SQLCP (Ad-hoc query plans)
SELECT TOP(10) mc.[type] AS [Memory Clerk Type], 
       CAST((SUM(mc.pages_kb)/1024.0) AS DECIMAL (15,2)) AS [Memory Usage (MB)] 
FROM sys.dm_os_memory_clerks AS mc WITH (NOLOCK)
GROUP BY mc.[type]  
ORDER BY SUM(mc.pages_kb) DESC OPTION (RECOMPILE);
------

-- MEMORYCLERK_SQLBUFFERPOOL was new for SQL Server 2012. It should be your highest consumer of memory

-- CACHESTORE_SQLCP  SQL Plans         
-- These are cached SQL statements or batches that aren't in stored procedures, functions and triggers
-- Watch out for high values for CACHESTORE_SQLCP
-- Enabling 'optimize for ad hoc workloads' at the instance level can help reduce this
-- Running DBCC FREESYSTEMCACHE ('SQL Plans') periodically may be required to better control this

-- CACHESTORE_OBJCP  Object Plans      
-- These are compiled plans for stored procedures, functions and triggers



-- Find single-use, ad-hoc and prepared queries that are bloating the plan cache  (Query 49) (Ad hoc Queries)
SELECT TOP(50) DB_NAME(t.[dbid]) AS [Database Name], t.[text] AS [Query Text], 
cp.objtype AS [Object Type], cp.cacheobjtype AS [Cache Object Type],  
cp.size_in_bytes/1024 AS [Plan Size in KB]
FROM sys.dm_exec_cached_plans AS cp WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(plan_handle) AS t
WHERE cp.cacheobjtype = N'Compiled Plan' 
AND cp.objtype IN (N'Adhoc', N'Prepared') 
AND cp.usecounts = 1
ORDER BY cp.size_in_bytes DESC, DB_NAME(t.[dbid]) OPTION (RECOMPILE);
------

-- Gives you the text, type and size of single-use ad-hoc and prepared queries that waste space in the plan cache
-- Enabling 'optimize for ad hoc workloads' for the instance can help (SQL Server 2008 and above only)
-- Running DBCC FREESYSTEMCACHE ('SQL Plans') periodically may be required to better control this
-- Enabling forced parameterization for the database can help, but test first!

-- Plan cache, adhoc workloads and clearing the single-use plan cache bloat
-- https://bit.ly/2EfYOkl


-- Get top total logical reads queries for entire instance (Query 50) (Top Logical Reads Queries)
SELECT TOP(50) DB_NAME(t.[dbid]) AS [Database Name],
REPLACE(REPLACE(LEFT(t.[text], 255), CHAR(10),''), CHAR(13),'') AS [Short Query Text], 
qs.total_logical_reads AS [Total Logical Reads],
qs.min_logical_reads AS [Min Logical Reads],
qs.total_logical_reads/qs.execution_count AS [Avg Logical Reads],
qs.max_logical_reads AS [Max Logical Reads],   
qs.min_worker_time AS [Min Worker Time],
qs.total_worker_time/qs.execution_count AS [Avg Worker Time], 
qs.max_worker_time AS [Max Worker Time], 
qs.min_elapsed_time AS [Min Elapsed Time], 
qs.total_elapsed_time/qs.execution_count AS [Avg Elapsed Time], 
qs.max_elapsed_time AS [Max Elapsed Time],
qs.execution_count AS [Execution Count], 
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index],
qs.creation_time AS [Creation Time]
--,t.[text] AS [Complete Query Text], qp.query_plan AS [Query Plan] -- uncomment out these columns if not copying results to Excel
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(plan_handle) AS t 
CROSS APPLY sys.dm_exec_query_plan(plan_handle) AS qp 
ORDER BY qs.total_logical_reads DESC OPTION (RECOMPILE);
------


-- Helps you find the most expensive queries from a memory perspective across the entire instance
-- Can also help track down parameter sniffing issues


-- Get top average elapsed time queries for entire instance (Query 51) (Top Avg Elapsed Time Queries)
SELECT TOP(50) DB_NAME(t.[dbid]) AS [Database Name], 
REPLACE(REPLACE(LEFT(t.[text], 255), CHAR(10),''), CHAR(13),'') AS [Short Query Text],  
qs.total_elapsed_time/qs.execution_count AS [Avg Elapsed Time],
qs.min_elapsed_time, qs.max_elapsed_time, qs.last_elapsed_time,
qs.execution_count AS [Execution Count],  
qs.total_logical_reads/qs.execution_count AS [Avg Logical Reads], 
qs.total_physical_reads/qs.execution_count AS [Avg Physical Reads], 
qs.total_worker_time/qs.execution_count AS [Avg Worker Time],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index],
qs.creation_time AS [Creation Time]
--,t.[text] AS [Complete Query Text], qp.query_plan AS [Query Plan] -- uncomment out these columns if not copying results to Excel
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(plan_handle) AS t 
CROSS APPLY sys.dm_exec_query_plan(plan_handle) AS qp 
ORDER BY qs.total_elapsed_time/qs.execution_count DESC OPTION (RECOMPILE);
------

-- Helps you find the highest average elapsed time queries across the entire instance
-- Can also help track down parameter sniffing issues


-- Look at UDF execution statistics (Query 52) (UDF Stats by DB)
SELECT TOP (25) DB_NAME(database_id) AS [Database Name], 
		   OBJECT_NAME(object_id, database_id) AS [Function Name],
		   total_worker_time, execution_count, total_elapsed_time,  
           total_elapsed_time/execution_count AS [avg_elapsed_time],  
           last_elapsed_time, last_execution_time, cached_time 
FROM sys.dm_exec_function_stats WITH (NOLOCK) 
ORDER BY total_worker_time DESC OPTION (RECOMPILE);
------

-- sys.dm_exec_function_stats (Transact-SQL)
-- https://bit.ly/2q1Q6BM

-- Showplan Enhancements for UDFs
-- https://bit.ly/2LVqiQ1


-- Database specific queries *****************************************************************

-- **** Please switch to a user database that you are interested in! *****
--USE YourDatabaseName; -- make sure to change to an actual database on your instance, not the master system database
--GO

-- Individual File Sizes and space available for current database  (Query 53) (File Sizes and Space)
SELECT f.name AS [File Name] , f.physical_name AS [Physical Name], 
CAST((f.size/128.0) AS DECIMAL(15,2)) AS [Total Size in MB],
CAST(f.size/128.0 - CAST(FILEPROPERTY(f.name, 'SpaceUsed') AS int)/128.0 AS DECIMAL(15,2)) 
AS [Available Space In MB], f.[file_id], fg.name AS [Filegroup Name],
f.is_percent_growth, f.growth, fg.is_default, fg.is_read_only, 
fg.is_autogrow_all_files -- New in SQL Server 2016
FROM sys.database_files AS f WITH (NOLOCK) 
LEFT OUTER JOIN sys.filegroups AS fg WITH (NOLOCK)
ON f.data_space_id = fg.data_space_id
ORDER BY f.[file_id] OPTION (RECOMPILE);
------

-- Look at how large and how full the files are and where they are located
-- Make sure the transaction log is not full!!

-- is_autogrow_all_files is new for SQL Server 2016. Equivalent to TF 1117 for user databases

-- SQL Server 2016: Changes in default behavior for autogrow and allocations for tempdb and user databases
-- https://bit.ly/2evRZSR


-- Log space usage for current database  (Query 54) (Log Space Usage)
SELECT DB_NAME(lsu.database_id) AS [Database Name], db.recovery_model_desc AS [Recovery Model],
		CAST(lsu.total_log_size_in_bytes/1048576.0 AS DECIMAL(10, 2)) AS [Total Log Space (MB)],
		CAST(lsu.used_log_space_in_bytes/1048576.0 AS DECIMAL(10, 2)) AS [Used Log Space (MB)], 
		CAST(lsu.used_log_space_in_percent AS DECIMAL(10, 2)) AS [Used Log Space %],
		CAST(lsu.log_space_in_bytes_since_last_backup/1048576.0 AS DECIMAL(10, 2)) AS [Used Log Space Since Last Backup (MB)],
		db.log_reuse_wait_desc		 
FROM sys.dm_db_log_space_usage AS lsu WITH (NOLOCK)
INNER JOIN sys.databases AS db WITH (NOLOCK)
ON lsu.database_id = db.database_id
OPTION (RECOMPILE);
------

-- Look at log file size and usage, along with the log reuse wait description for the current database



-- Get database scoped configuration values for current database (Query 55) (Database-scoped Configurations)
SELECT configuration_id, name, [value] AS [value_for_primary], value_for_secondary
FROM sys.database_scoped_configurations WITH (NOLOCK) OPTION (RECOMPILE);
------

-- This lets you see the value of these new properties for the current database

-- Clear plan cache for current database
-- ALTER DATABASE SCOPED CONFIGURATION CLEAR PROCEDURE_CACHE;

-- ALTER DATABASE SCOPED CONFIGURATION (Transact-SQL)
-- https://bit.ly/2sOH7nb


-- I/O Statistics by file for the current database  (Query 56) (IO Stats By File)
SELECT DB_NAME(DB_ID()) AS [Database Name], df.name AS [Logical Name], vfs.[file_id], df.type_desc,
df.physical_name AS [Physical Name], CAST(vfs.size_on_disk_bytes/1048576.0 AS DECIMAL(10, 2)) AS [Size on Disk (MB)],
vfs.num_of_reads, vfs.num_of_writes, vfs.io_stall_read_ms, vfs.io_stall_write_ms,
CAST(100. * vfs.io_stall_read_ms/(vfs.io_stall_read_ms + vfs.io_stall_write_ms) AS DECIMAL(10,1)) AS [IO Stall Reads Pct],
CAST(100. * vfs.io_stall_write_ms/(vfs.io_stall_write_ms + vfs.io_stall_read_ms) AS DECIMAL(10,1)) AS [IO Stall Writes Pct],
(vfs.num_of_reads + vfs.num_of_writes) AS [Writes + Reads], 
CAST(vfs.num_of_bytes_read/1048576.0 AS DECIMAL(10, 2)) AS [MB Read], 
CAST(vfs.num_of_bytes_written/1048576.0 AS DECIMAL(10, 2)) AS [MB Written],
CAST(100. * vfs.num_of_reads/(vfs.num_of_reads + vfs.num_of_writes) AS DECIMAL(10,1)) AS [# Reads Pct],
CAST(100. * vfs.num_of_writes/(vfs.num_of_reads + vfs.num_of_writes) AS DECIMAL(10,1)) AS [# Write Pct],
CAST(100. * vfs.num_of_bytes_read/(vfs.num_of_bytes_read + vfs.num_of_bytes_written) AS DECIMAL(10,1)) AS [Read Bytes Pct],
CAST(100. * vfs.num_of_bytes_written/(vfs.num_of_bytes_read + vfs.num_of_bytes_written) AS DECIMAL(10,1)) AS [Written Bytes Pct]
FROM sys.dm_io_virtual_file_stats(DB_ID(), NULL) AS vfs
INNER JOIN sys.database_files AS df WITH (NOLOCK)
ON vfs.[file_id]= df.[file_id] OPTION (RECOMPILE);
------

-- This helps you characterize your workload better from an I/O perspective for this database
-- It helps you determine whether you has an OLTP or DW/DSS type of workload



-- Get most frequently executed queries for this database (Query 57) (Query Execution Counts)
SELECT TOP(50) LEFT(t.[text], 50) AS [Short Query Text], qs.execution_count AS [Execution Count],
qs.total_logical_reads AS [Total Logical Reads],
qs.total_logical_reads/qs.execution_count AS [Avg Logical Reads],
qs.total_worker_time AS [Total Worker Time],
qs.total_worker_time/qs.execution_count AS [Avg Worker Time], 
qs.total_elapsed_time AS [Total Elapsed Time],
qs.total_elapsed_time/qs.execution_count AS [Avg Elapsed Time],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index], 
qs.creation_time AS [Creation Time]
--,t.[text] AS [Complete Query Text], qp.query_plan AS [Query Plan] -- uncomment out these columns if not copying results to Excel
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(plan_handle) AS t 
CROSS APPLY sys.dm_exec_query_plan(plan_handle) AS qp 
WHERE t.dbid = DB_ID()
ORDER BY qs.execution_count DESC OPTION (RECOMPILE);
------


-- Queries 56 through 61 are the "Bad Man List" for stored procedures

-- Top Cached SPs By Execution Count (Query 58) (SP Execution Counts)
SELECT TOP(100) p.name AS [SP Name], qs.execution_count AS [Execution Count],
ISNULL(qs.execution_count/DATEDIFF(Minute, qs.cached_time, GETDATE()), 0) AS [Calls/Minute],
qs.total_elapsed_time/qs.execution_count AS [Avg Elapsed Time],
qs.total_worker_time/qs.execution_count AS [Avg Worker Time],    
qs.total_logical_reads/qs.execution_count AS [Avg Logical Reads],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index],
FORMAT(qs.last_execution_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Last Execution Time], 
FORMAT(qs.cached_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Plan Cached Time]
-- ,qp.query_plan AS [Query Plan] -- Uncomment if you want the Query Plan
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
CROSS APPLY sys.dm_exec_query_plan(qs.plan_handle) AS qp
WHERE qs.database_id = DB_ID()
AND DATEDIFF(Minute, qs.cached_time, GETDATE()) > 0
ORDER BY qs.execution_count DESC OPTION (RECOMPILE);
------

-- Tells you which cached stored procedures are called the most often
-- This helps you characterize and baseline your workload


-- Top Cached SPs By Avg Elapsed Time (Query 59) (SP Avg Elapsed Time)
SELECT TOP(25) p.name AS [SP Name], qs.min_elapsed_time, qs.total_elapsed_time/qs.execution_count AS [avg_elapsed_time], 
qs.max_elapsed_time, qs.last_elapsed_time, qs.total_elapsed_time, qs.execution_count, 
ISNULL(qs.execution_count/DATEDIFF(Minute, qs.cached_time, GETDATE()), 0) AS [Calls/Minute], 
qs.total_worker_time/qs.execution_count AS [AvgWorkerTime], 
qs.total_worker_time AS [TotalWorkerTime],
FORMAT(qs.last_execution_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Last Execution Time], 
FORMAT(qs.cached_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Plan Cached Time]
-- ,qp.query_plan AS [Query Plan] -- Uncomment if you want the Query Plan
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
CROSS APPLY sys.dm_exec_query_plan(qs.plan_handle) AS qp
WHERE qs.database_id = DB_ID()
AND DATEDIFF(Minute, qs.cached_time, GETDATE()) > 0
ORDER BY avg_elapsed_time DESC OPTION (RECOMPILE);
------

-- This helps you find high average elapsed time cached stored procedures that
-- may be easy to optimize with standard query tuning techniques



-- Top Cached SPs By Total Worker time. Worker time relates to CPU cost  (Query 60) (SP Worker Time)
SELECT TOP(25) p.name AS [SP Name], qs.total_worker_time AS [TotalWorkerTime], 
qs.total_worker_time/qs.execution_count AS [AvgWorkerTime], qs.execution_count, 
ISNULL(qs.execution_count/DATEDIFF(Minute, qs.cached_time, GETDATE()), 0) AS [Calls/Minute],
qs.total_elapsed_time, qs.total_elapsed_time/qs.execution_count AS [avg_elapsed_time],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index],
FORMAT(qs.last_execution_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Last Execution Time], 
FORMAT(qs.cached_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Plan Cached Time]
-- ,qp.query_plan AS [Query Plan] -- Uncomment if you want the Query Plan
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
CROSS APPLY sys.dm_exec_query_plan(qs.plan_handle) AS qp
WHERE qs.database_id = DB_ID()
AND DATEDIFF(Minute, qs.cached_time, GETDATE()) > 0
ORDER BY qs.total_worker_time DESC OPTION (RECOMPILE);
------

-- This helps you find the most expensive cached stored procedures from a CPU perspective
-- You should look at this if you see signs of CPU pressure


-- Top Cached SPs By Total Logical Reads. Logical reads relate to memory pressure  (Query 61) (SP Logical Reads)
SELECT TOP(25) p.name AS [SP Name], qs.total_logical_reads AS [TotalLogicalReads], 
qs.total_logical_reads/qs.execution_count AS [AvgLogicalReads],qs.execution_count, 
ISNULL(qs.execution_count/DATEDIFF(Minute, qs.cached_time, GETDATE()), 0) AS [Calls/Minute], 
qs.total_elapsed_time, qs.total_elapsed_time/qs.execution_count AS [avg_elapsed_time],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index], 
FORMAT(qs.last_execution_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Last Execution Time], 
FORMAT(qs.cached_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Plan Cached Time]
-- ,qp.query_plan AS [Query Plan] -- Uncomment if you want the Query Plan
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
CROSS APPLY sys.dm_exec_query_plan(qs.plan_handle) AS qp
WHERE qs.database_id = DB_ID()
AND DATEDIFF(Minute, qs.cached_time, GETDATE()) > 0
ORDER BY qs.total_logical_reads DESC OPTION (RECOMPILE);
------

-- This helps you find the most expensive cached stored procedures from a memory perspective
-- You should look at this if you see signs of memory pressure


-- Top Cached SPs By Total Physical Reads. Physical reads relate to disk read I/O pressure  (Query 62) (SP Physical Reads)
SELECT TOP(25) p.name AS [SP Name],qs.total_physical_reads AS [TotalPhysicalReads], 
qs.total_physical_reads/qs.execution_count AS [AvgPhysicalReads], qs.execution_count, 
qs.total_logical_reads,qs.total_elapsed_time, qs.total_elapsed_time/qs.execution_count AS [avg_elapsed_time],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index],
FORMAT(qs.last_execution_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Last Execution Time], 
FORMAT(qs.cached_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Plan Cached Time]
-- ,qp.query_plan AS [Query Plan] -- Uncomment if you want the Query Plan 
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
CROSS APPLY sys.dm_exec_query_plan(qs.plan_handle) AS qp
WHERE qs.database_id = DB_ID()
AND qs.total_physical_reads > 0
ORDER BY qs.total_physical_reads DESC, qs.total_logical_reads DESC OPTION (RECOMPILE);
------

-- This helps you find the most expensive cached stored procedures from a read I/O perspective
-- You should look at this if you see signs of I/O pressure or of memory pressure
       


-- Top Cached SPs By Total Logical Writes (Query 63) (SP Logical Writes)
-- Logical writes relate to both memory and disk I/O pressure 
SELECT TOP(25) p.name AS [SP Name], qs.total_logical_writes AS [TotalLogicalWrites], 
qs.total_logical_writes/qs.execution_count AS [AvgLogicalWrites], qs.execution_count,
ISNULL(qs.execution_count/DATEDIFF(Minute, qs.cached_time, GETDATE()), 0) AS [Calls/Minute],
qs.total_elapsed_time, qs.total_elapsed_time/qs.execution_count AS [avg_elapsed_time],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index], 
FORMAT(qs.last_execution_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Last Execution Time], 
FORMAT(qs.cached_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Plan Cached Time]
-- ,qp.query_plan AS [Query Plan] -- Uncomment if you want the Query Plan 
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
CROSS APPLY sys.dm_exec_query_plan(qs.plan_handle) AS qp
WHERE qs.database_id = DB_ID()
AND qs.total_logical_writes > 0
AND DATEDIFF(Minute, qs.cached_time, GETDATE()) > 0
ORDER BY qs.total_logical_writes DESC OPTION (RECOMPILE);
------

-- This helps you find the most expensive cached stored procedures from a write I/O perspective
-- You should look at this if you see signs of I/O pressure or of memory pressure


-- Lists the top statements by average input/output usage for the current database  (Query 64) (Top IO Statements)
SELECT TOP(50) OBJECT_NAME(qt.objectid, dbid) AS [SP Name],
(qs.total_logical_reads + qs.total_logical_writes) /qs.execution_count AS [Avg IO], qs.execution_count AS [Execution Count],
SUBSTRING(qt.[text],qs.statement_start_offset/2, 
	(CASE 
		WHEN qs.statement_end_offset = -1 
	 THEN LEN(CONVERT(nvarchar(max), qt.[text])) * 2 
		ELSE qs.statement_end_offset 
	 END - qs.statement_start_offset)/2) AS [Query Text]	
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(qs.sql_handle) AS qt
WHERE qt.[dbid] = DB_ID()
ORDER BY [Avg IO] DESC OPTION (RECOMPILE);
------

-- Helps you find the most expensive statements for I/O by SP



-- Possible Bad NC Indexes (writes > reads)  (Query 65) (Bad NC Indexes)
SELECT OBJECT_NAME(s.[object_id]) AS [Table Name], i.name AS [Index Name], i.index_id, 
i.is_disabled, i.is_hypothetical, i.has_filter, i.fill_factor,
s.user_updates AS [Total Writes], s.user_seeks + s.user_scans + s.user_lookups AS [Total Reads],
s.user_updates - (s.user_seeks + s.user_scans + s.user_lookups) AS [Difference]
FROM sys.dm_db_index_usage_stats AS s WITH (NOLOCK)
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON s.[object_id] = i.[object_id]
AND i.index_id = s.index_id
WHERE OBJECTPROPERTY(s.[object_id],'IsUserTable') = 1
AND s.database_id = DB_ID()
AND s.user_updates > (s.user_seeks + s.user_scans + s.user_lookups)
AND i.index_id > 1 AND i.[type_desc] = N'NONCLUSTERED'
AND i.is_primary_key = 0 AND i.is_unique_constraint = 0 AND i.is_unique = 0
ORDER BY [Difference] DESC, [Total Writes] DESC, [Total Reads] ASC OPTION (RECOMPILE);
------

-- Look for indexes with high numbers of writes and zero or very low numbers of reads
-- Consider your complete workload, and how long your instance has been running
-- Investigate further before dropping an index!


-- Missing Indexes for current database by Index Advantage  (Query 66) (Missing Indexes)
SELECT CONVERT(decimal(18,2), user_seeks * avg_total_user_cost * (avg_user_impact * 0.01)) AS [index_advantage], 
migs.last_user_seek, mid.[statement] AS [Database.Schema.Table],
COUNT(1) OVER(PARTITION BY mid.[statement]) AS [missing_indexes_for_table],
COUNT(1) OVER(PARTITION BY mid.[statement], equality_columns) AS [similar_missing_indexes_for_table],
mid.equality_columns, mid.inequality_columns, mid.included_columns,
migs.unique_compiles, migs.user_seeks, 
CONVERT(decimal(18,2), migs.avg_total_user_cost) AS [avg_total_user_cost], migs.avg_user_impact,
OBJECT_NAME(mid.[object_id]) AS [Table Name], p.rows AS [Table Rows]
FROM sys.dm_db_missing_index_group_stats AS migs WITH (NOLOCK)
INNER JOIN sys.dm_db_missing_index_groups AS mig WITH (NOLOCK)
ON migs.group_handle = mig.index_group_handle
INNER JOIN sys.dm_db_missing_index_details AS mid WITH (NOLOCK)
ON mig.index_handle = mid.index_handle
INNER JOIN sys.partitions AS p WITH (NOLOCK)
ON p.[object_id] = mid.[object_id]
WHERE mid.database_id = DB_ID()
AND p.index_id < 2 
ORDER BY index_advantage DESC OPTION (RECOMPILE);
------

-- Look at index advantage, last user seek time, number of user seeks to help determine source and importance
-- SQL Server is overly eager to add included columns, so beware
-- Do not just blindly add indexes that show up from this query!!!


-- Find missing index warnings for cached plans in the current database  (Query 67) (Missing Index Warnings)
-- Note: This query could take some time on a busy instance
SELECT TOP(25) OBJECT_NAME(objectid) AS [ObjectName], 
               cp.objtype, cp.usecounts, cp.size_in_bytes, query_plan
FROM sys.dm_exec_cached_plans AS cp WITH (NOLOCK)
CROSS APPLY sys.dm_exec_query_plan(cp.plan_handle) AS qp
WHERE CAST(query_plan AS NVARCHAR(MAX)) LIKE N'%MissingIndex%'
AND dbid = DB_ID()
ORDER BY cp.usecounts DESC OPTION (RECOMPILE);
------

-- Helps you connect missing indexes to specific stored procedures or queries
-- This can help you decide whether to add them or not


-- Breaks down buffers used by current database by object (table, index) in the buffer cache  (Query 68) (Buffer Usage)
-- Note: This query could take some time on a busy instance
SELECT OBJECT_NAME(p.[object_id]) AS [Object Name], p.index_id, 
CAST(COUNT(*)/128.0 AS DECIMAL(10, 2)) AS [Buffer size(MB)],  
COUNT(*) AS [BufferCount], p.[Rows] AS [Row Count],
p.data_compression_desc AS [Compression Type]
FROM sys.allocation_units AS a WITH (NOLOCK)
INNER JOIN sys.dm_os_buffer_descriptors AS b WITH (NOLOCK)
ON a.allocation_unit_id = b.allocation_unit_id
INNER JOIN sys.partitions AS p WITH (NOLOCK)
ON a.container_id = p.hobt_id
WHERE b.database_id = CONVERT(int, DB_ID())
AND p.[object_id] > 100
AND OBJECT_NAME(p.[object_id]) NOT LIKE N'plan_%'
AND OBJECT_NAME(p.[object_id]) NOT LIKE N'sys%'
AND OBJECT_NAME(p.[object_id]) NOT LIKE N'xml_index_nodes%'
GROUP BY p.[object_id], p.index_id, p.data_compression_desc, p.[Rows]
ORDER BY [BufferCount] DESC OPTION (RECOMPILE);
------

-- Tells you what tables and indexes are using the most memory in the buffer cache
-- It can help identify possible candidates for data compression


-- Get Table names, row counts, and compression status for clustered index or heap  (Query 69) (Table Sizes)
SELECT OBJECT_NAME(object_id) AS [ObjectName], 
SUM(Rows) AS [RowCount], data_compression_desc AS [CompressionType]
FROM sys.partitions WITH (NOLOCK)
WHERE index_id < 2 --ignore the partitions from the non-clustered index if any
AND OBJECT_NAME(object_id) NOT LIKE N'sys%'
AND OBJECT_NAME(object_id) NOT LIKE N'queue_%' 
AND OBJECT_NAME(object_id) NOT LIKE N'filestream_tombstone%' 
AND OBJECT_NAME(object_id) NOT LIKE N'fulltext%'
AND OBJECT_NAME(object_id) NOT LIKE N'ifts_comp_fragment%'
AND OBJECT_NAME(object_id) NOT LIKE N'filetable_updates%'
AND OBJECT_NAME(object_id) NOT LIKE N'xml_index_nodes%'
AND OBJECT_NAME(object_id) NOT LIKE N'sqlagent_job%'  
AND OBJECT_NAME(object_id) NOT LIKE N'plan_persist%'  
GROUP BY object_id, data_compression_desc
ORDER BY SUM(Rows) DESC OPTION (RECOMPILE);
------

-- Gives you an idea of table sizes, and possible data compression opportunities



-- Get some key table properties (Query 70) (Table Properties)
SELECT OBJECT_NAME(t.[object_id]) AS [ObjectName], p.[rows] AS [Table Rows], p.index_id, 
       p.data_compression_desc AS [Index Data Compression],
       t.create_date, t.lock_on_bulk_load, t.is_replicated, t.has_replication_filter, 
       t.is_tracked_by_cdc, t.lock_escalation_desc, t.is_filetable, 
	   t.is_memory_optimized, t.durability_desc, 
	   t.temporal_type_desc, t.is_remote_data_archive_enabled, t.is_external -- new for SQL Server 2016
FROM sys.tables AS t WITH (NOLOCK)
INNER JOIN sys.partitions AS p WITH (NOLOCK)
ON t.[object_id] = p.[object_id]
WHERE OBJECT_NAME(t.[object_id]) NOT LIKE N'sys%'
ORDER BY OBJECT_NAME(t.[object_id]), p.index_id OPTION (RECOMPILE);
------

-- Gives you some good information about your tables
-- is_memory_optimized and durability_desc were new in SQL Server 2014
-- temporal_type_desc, is_remote_data_archive_enabled, is_external are new in SQL Server 2016

-- sys.tables (Transact-SQL)
-- https://bit.ly/2Gk7998



-- When were Statistics last updated on all indexes?  (Query 71) (Statistics Update)
SELECT SCHEMA_NAME(o.Schema_ID) + N'.' + o.[NAME] AS [Object Name], o.[type_desc] AS [Object Type],
      i.[name] AS [Index Name], STATS_DATE(i.[object_id], i.index_id) AS [Statistics Date], 
      s.auto_created, s.no_recompute, s.user_created, s.is_incremental, s.is_temporary,
	  st.row_count, st.used_page_count
FROM sys.objects AS o WITH (NOLOCK)
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON o.[object_id] = i.[object_id]
INNER JOIN sys.stats AS s WITH (NOLOCK)
ON i.[object_id] = s.[object_id] 
AND i.index_id = s.stats_id
INNER JOIN sys.dm_db_partition_stats AS st WITH (NOLOCK)
ON o.[object_id] = st.[object_id]
AND i.[index_id] = st.[index_id]
WHERE o.[type] IN ('U', 'V')
AND st.row_count > 0
ORDER BY STATS_DATE(i.[object_id], i.index_id) DESC OPTION (RECOMPILE);
------  

-- Helps discover possible problems with out-of-date statistics
-- Also gives you an idea which indexes are the most active

-- sys.stats (Transact-SQL)
-- https://bit.ly/2GyAxrn

-- UPDATEs to Statistics (Erin Stellato)
-- https://bit.ly/2vhrYQy



-- Look at most frequently modified indexes and statistics (Query 72) (Volatile Indexes)
SELECT o.[name] AS [Object Name], o.[object_id], o.[type_desc], s.[name] AS [Statistics Name], 
       s.stats_id, s.no_recompute, s.auto_created, s.is_incremental, s.is_temporary,
	   sp.modification_counter, sp.[rows], sp.rows_sampled, sp.last_updated
FROM sys.objects AS o WITH (NOLOCK)
INNER JOIN sys.stats AS s WITH (NOLOCK)
ON s.object_id = o.object_id
CROSS APPLY sys.dm_db_stats_properties(s.object_id, s.stats_id) AS sp
WHERE o.[type_desc] NOT IN (N'SYSTEM_TABLE', N'INTERNAL_TABLE')
AND sp.modification_counter > 0
ORDER BY sp.modification_counter DESC, o.name OPTION (RECOMPILE);
------

-- This helps you understand your workload and make better decisions about 
-- things like data compression and adding new indexes to a table



-- Get fragmentation info for all indexes above a certain size in the current database  (Query 73) (Index Fragmentation)
-- Note: This query could take some time on a very large database
SELECT DB_NAME(ps.database_id) AS [Database Name], SCHEMA_NAME(o.[schema_id]) AS [Schema Name],
OBJECT_NAME(ps.OBJECT_ID) AS [Object Name], i.[name] AS [Index Name], ps.index_id, 
ps.index_type_desc, ps.avg_fragmentation_in_percent, 
ps.fragment_count, ps.page_count, i.fill_factor, i.has_filter, 
i.filter_definition, i.[allow_page_locks]
FROM sys.dm_db_index_physical_stats(DB_ID(),NULL, NULL, NULL , N'LIMITED') AS ps
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON ps.[object_id] = i.[object_id] 
AND ps.index_id = i.index_id
INNER JOIN sys.objects AS o WITH (NOLOCK)
ON i.[object_id] = o.[object_id]
WHERE ps.database_id = DB_ID()
AND ps.page_count > 2500
ORDER BY ps.avg_fragmentation_in_percent DESC OPTION (RECOMPILE);
------

-- Helps determine whether you have framentation in your relational indexes
-- and how effective your index maintenance strategy is


--- Index Read/Write stats (all tables in current DB) ordered by Reads  (Query 74) (Overall Index Usage - Reads)
SELECT OBJECT_NAME(i.[object_id]) AS [ObjectName], i.[name] AS [IndexName], i.index_id, 
       s.user_seeks, s.user_scans, s.user_lookups,
	   s.user_seeks + s.user_scans + s.user_lookups AS [Total Reads], 
	   s.user_updates AS [Writes],  
	   i.[type_desc] AS [Index Type], i.fill_factor AS [Fill Factor], i.has_filter, i.filter_definition, 
	   s.last_user_scan, s.last_user_lookup, s.last_user_seek
FROM sys.indexes AS i WITH (NOLOCK)
LEFT OUTER JOIN sys.dm_db_index_usage_stats AS s WITH (NOLOCK)
ON i.[object_id] = s.[object_id]
AND i.index_id = s.index_id
AND s.database_id = DB_ID()
WHERE OBJECTPROPERTY(i.[object_id],'IsUserTable') = 1
ORDER BY s.user_seeks + s.user_scans + s.user_lookups DESC OPTION (RECOMPILE); -- Order by reads
------

-- Show which indexes in the current database are most active for Reads


--- Index Read/Write stats (all tables in current DB) ordered by Writes  (Query 75) (Overall Index Usage - Writes)
SELECT OBJECT_NAME(i.[object_id]) AS [ObjectName], i.[name] AS [IndexName], i.index_id,
	   s.user_updates AS [Writes], s.user_seeks + s.user_scans + s.user_lookups AS [Total Reads], 
	   i.[type_desc] AS [Index Type], i.fill_factor AS [Fill Factor], i.has_filter, i.filter_definition,
	   s.last_system_update, s.last_user_update
FROM sys.indexes AS i WITH (NOLOCK)
LEFT OUTER JOIN sys.dm_db_index_usage_stats AS s WITH (NOLOCK)
ON i.[object_id] = s.[object_id]
AND i.index_id = s.index_id
AND s.database_id = DB_ID()
WHERE OBJECTPROPERTY(i.[object_id],'IsUserTable') = 1
ORDER BY s.user_updates DESC OPTION (RECOMPILE);						 -- Order by writes
------

-- Show which indexes in the current database are most active for Writes


-- Get in-memory OLTP index usage (Query 76) (XTP Index Usage)
SELECT OBJECT_NAME(i.[object_id]) AS [Object Name], i.index_id, i.[name] AS [Index Name],
       i.[type_desc], xis.scans_started, xis.scans_retries, 
	   xis.rows_touched, xis.rows_returned
FROM sys.dm_db_xtp_index_stats AS xis WITH (NOLOCK)
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON i.[object_id] = xis.[object_id] 
AND i.index_id = xis.index_id 
ORDER BY OBJECT_NAME(i.[object_id]) OPTION (RECOMPILE);
------

-- This gives you some index usage statistics for in-memory OLTP
-- Returns no data if you are not using in-memory OLTP

-- Guidelines for Using Indexes on Memory-Optimized Tables
-- https://bit.ly/2GCP8lF


-- Look at Columnstore index physical statistics (Query 77) (Columnstore Index Physical Stat)
SELECT OBJECT_NAME(ps.object_id) AS [TableName],  
	i.[name] AS [IndexName], ps.index_id, ps.partition_number,
	ps.delta_store_hobt_id, ps.state_desc, ps.total_rows, ps.size_in_bytes,
	ps.trim_reason_desc, ps.generation, ps.transition_to_compressed_state_desc,
	ps.has_vertipaq_optimization, ps.deleted_rows,
	100 * (ISNULL(ps.deleted_rows, 0))/ps.total_rows AS [Fragmentation]
FROM sys.dm_db_column_store_row_group_physical_stats AS ps WITH (NOLOCK)
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON ps.object_id = i.object_id 
AND ps.index_id = i.index_id
ORDER BY ps.object_id, ps.partition_number, ps.row_group_id OPTION (RECOMPILE);
------

-- sys.dm_db_column_store_row_group_physical_stats (Transact-SQL)
-- https://bit.ly/2q276XQ


-- Get lock waits for current database (Query 78) (Lock Waits)
SELECT o.name AS [table_name], i.name AS [index_name], ios.index_id, ios.partition_number,
		SUM(ios.row_lock_wait_count) AS [total_row_lock_waits], 
		SUM(ios.row_lock_wait_in_ms) AS [total_row_lock_wait_in_ms],
		SUM(ios.page_lock_wait_count) AS [total_page_lock_waits],
		SUM(ios.page_lock_wait_in_ms) AS [total_page_lock_wait_in_ms],
		SUM(ios.page_lock_wait_in_ms)+ SUM(row_lock_wait_in_ms) AS [total_lock_wait_in_ms]
FROM sys.dm_db_index_operational_stats(DB_ID(), NULL, NULL, NULL) AS ios
INNER JOIN sys.objects AS o WITH (NOLOCK)
ON ios.[object_id] = o.[object_id]
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON ios.[object_id] = i.[object_id] 
AND ios.index_id = i.index_id
WHERE o.[object_id] > 100
GROUP BY o.name, i.name, ios.index_id, ios.partition_number
HAVING SUM(ios.page_lock_wait_in_ms)+ SUM(row_lock_wait_in_ms) > 0
ORDER BY total_lock_wait_in_ms DESC OPTION (RECOMPILE);
------

-- This query is helpful for troubleshooting blocking and deadlocking issues



-- Look at UDF execution statistics (Query 79) (UDF Statistics)
SELECT OBJECT_NAME(object_id) AS [Function Name], execution_count,
	   total_worker_time, total_logical_reads, total_physical_reads, total_elapsed_time, 
	   total_elapsed_time/execution_count AS [avg_elapsed_time],
	   FORMAT(cached_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Plan Cached Time]
FROM sys.dm_exec_function_stats WITH (NOLOCK) 
WHERE database_id = DB_ID()
ORDER BY total_worker_time DESC OPTION (RECOMPILE); 
------

-- New for SQL Server 2016
-- Helps you investigate scalar UDF performance issues
-- Does not return information for table valued functions

-- sys.dm_exec_function_stats (Transact-SQL)
-- https://bit.ly/2q1Q6BM


-- Get Query Store Options for this database (Query 80) (QueryStore Options)
SELECT actual_state_desc, desired_state_desc, [interval_length_minutes],
       current_storage_size_mb, [max_storage_size_mb], 
	   query_capture_mode_desc, size_based_cleanup_mode_desc
FROM sys.database_query_store_options WITH (NOLOCK) OPTION (RECOMPILE);
------

-- New for SQL Server 2016
-- Requires that Query Store is enabled for this database

-- Tuning Workload Performance with Query Store
-- https://bit.ly/1kHSl7w


-- Get highest aggregate duration queries over last hour (Query 81) (High Aggregate Duration Queries)
WITH AggregatedDurationLastHour
AS
(SELECT q.query_id, SUM(count_executions * avg_duration) AS total_duration,
   COUNT (distinct p.plan_id) AS number_of_plans
   FROM sys.query_store_query_text AS qt WITH (NOLOCK)
   INNER JOIN sys.query_store_query AS q WITH (NOLOCK)
   ON qt.query_text_id = q.query_text_id
   INNER JOIN sys.query_store_plan AS p WITH (NOLOCK)
   ON q.query_id = p.query_id
   INNER JOIN sys.query_store_runtime_stats AS rs WITH (NOLOCK)
   ON rs.plan_id = p.plan_id
   INNER JOIN sys.query_store_runtime_stats_interval AS rsi WITH (NOLOCK)
   ON rsi.runtime_stats_interval_id = rs.runtime_stats_interval_id
   WHERE rsi.start_time >= DATEADD(hour, -1, GETUTCDATE()) 
   AND rs.execution_type_desc = N'Regular'
   GROUP BY q.query_id),
OrderedDuration AS
(SELECT query_id, total_duration, number_of_plans, 
 ROW_NUMBER () OVER (ORDER BY total_duration DESC, query_id) AS RN
 FROM AggregatedDurationLastHour)
SELECT OBJECT_NAME(q.object_id) AS [Containing Object], qt.query_sql_text, 
od.total_duration AS [Total Duration (microsecs)], 
od.number_of_plans AS [Plan Count],
p.is_forced_plan, p.is_parallel_plan, p.is_trivial_plan,
q.query_parameterization_type_desc, p.[compatibility_level],
p.last_compile_start_time, q.last_execution_time,
CONVERT(xml, p.query_plan) AS query_plan_xml 
FROM OrderedDuration AS od 
INNER JOIN sys.query_store_query AS q WITH (NOLOCK)
ON q.query_id  = od.query_id
INNER JOIN sys.query_store_query_text AS qt WITH (NOLOCK)
ON q.query_text_id = qt.query_text_id
INNER JOIN sys.query_store_plan AS p WITH (NOLOCK)
ON q.query_id = p.query_id
WHERE od.RN <= 50 
ORDER BY total_duration DESC OPTION (RECOMPILE);
------

-- New for SQL Server 2016
-- Requires that QueryStore is enabled for this database


-- Get input buffer information for the current database (Query 82) (Input Buffer)
SELECT es.session_id, DB_NAME(es.database_id) AS [Database Name],
es.login_time, es.cpu_time, es.logical_reads,
es.[status], ib.event_info AS [Input Buffer]
FROM sys.dm_exec_sessions AS es WITH (NOLOCK)
CROSS APPLY sys.dm_exec_input_buffer(es.session_id, NULL) AS ib
WHERE es.database_id = DB_ID()
AND es.session_id > 50
AND es.session_id <> @@SPID OPTION (RECOMPILE);

-- Gives you input buffer information from all non-system sessions for the current database
-- Replaces DBCC INPUTBUFFER

-- New DMF for retrieving input buffer in SQL Server
-- https://bit.ly/2uHKMbz



-- Look at recent Full backups for the current database (Query 83) (Recent Full Backups)
SELECT TOP (30) bs.machine_name, bs.server_name, bs.database_name AS [Database Name], bs.recovery_model,
CONVERT (BIGINT, bs.backup_size / 1048576 ) AS [Uncompressed Backup Size (MB)],
CONVERT (BIGINT, bs.compressed_backup_size / 1048576 ) AS [Compressed Backup Size (MB)],
CONVERT (NUMERIC (20,2), (CONVERT (FLOAT, bs.backup_size) /
CONVERT (FLOAT, bs.compressed_backup_size))) AS [Compression Ratio], bs.has_backup_checksums, bs.is_copy_only, bs.encryptor_type,
DATEDIFF (SECOND, bs.backup_start_date, bs.backup_finish_date) AS [Backup Elapsed Time (sec)],
bs.backup_finish_date AS [Backup Finish Date], bmf.physical_device_name AS [Backup Location], bmf.physical_block_size
FROM msdb.dbo.backupset AS bs WITH (NOLOCK)
INNER JOIN msdb.dbo.backupmediafamily AS bmf WITH (NOLOCK)
ON bs.media_set_id = bmf.media_set_id  
WHERE bs.database_name = DB_NAME(DB_ID())
AND bs.[type] = 'D' -- Change to L if you want Log backups
ORDER BY bs.backup_finish_date DESC OPTION (RECOMPILE);
------

-- Are your backup sizes and times changing over time?
-- Are you using backup compression?
-- Are you using backup checksums?
-- Are you doing copy_only backups?
-- Are you doing encrypted backups?
-- Have you done any backup tuning with striped backups, or changing the parameters of the backup command?

-- In SQL Server 2016, native SQL Server backup compression actually works much better with databases that are using TDE than in previous versions
-- https://bit.ly/28Rpb2x


-- These four Pluralsight Courses go into more detail about how to run these queries and interpret the results

-- SQL Server 2017: Diagnosing Configuration Issues with DMVs
-- https://bit.ly/2MSUDUL

-- SQL Server 2014 DMV Diagnostic Queries � Part 1 
-- https://bit.ly/2plxCer

-- SQL Server 2014 DMV Diagnostic Queries � Part 2
-- https://bit.ly/2IuJpzI

-- SQL Server 2014 DMV Diagnostic Queries � Part 3
-- https://bit.ly/2FIlCPb



-- Sign up for Microsoft Visual Studio Dev Essentials and get a free three month pass to Pluralsight

-- Microsoft Visual Studio Dev Essentials
-- http://bit.ly/1q6xbDL


-- Sign up for Microsoft Azure Essentials and get lots of free Azure usage credits, MCP exam voucher, three month Pluralsight subscription

-- Microsoft Azure Essentials
-- https://bit.ly/2JMWe8x


-- August 2017 blog series about upgrading and migrating to SQL Server 2016/2017
-- https://bit.ly/2ftKVrX

tools\dbatools\bin\smo\coreclr\Microsoft.SqlServer.TransactSql.ScriptDom.dll

md5: BBB18E7001990AB4A2D88C147873D4AD | sha1: 524FDD20925B492CEEF5BB9FA56C998BF2F966EC | sha256: 2C8359841EF323BB41A4FD09E3A396E449EDE04D8BCD482E25413029155729ED | sha512: C0FC3177FE7AC359C67C9DE7E63394C6558494A95013404C8FDE0F0F982DCC1AB58D889B4AB3789B3F385EFA723E097607DB363635F16D681FD919BDA86F452A

tools\dbatools\bin\smo\coreclr\Microsoft.SqlServer.Types.dll

md5: D373482D61BB8B6DCFE0627BBBA47E20 | sha1: EDEC514041860AA053FFF21360C949D73197AD24 | sha256: E8FC85F664E3B436E55338831E995FBAD058B428024B9B50B4011AAA37EC1E00 | sha512: C14ADF6A11DAF9446E15A5BAAD1079F115E9F879C8C29B09C2324B508116CD7B73620830957C7EAA72CBF403F796271B980A087BC0907317FBAFBE5274BAA9CB

tools\dbatools\bin\smo\coreclr\System.Security.SecureString.dll

md5: CFB05BA0EA20FDA5485D22778C9C01CB | sha1: F11292760F86B90387A8FA44B0FBDED381170764 | sha256: 8DB04A3AC0369DAF0BF0AEAEBC947E4D91AF4CF853144D2C1F1977B893FBE4A6 | sha512: C62869D398E97F0DDF065043D228BB1E3EC1CCE537461A1FF29CF4C925108F232BED7F39EC9853F5A5432000AA716BF9C1B90B16852B66AA819B84D0859517AA

tools\dbatools\bin\smo\Microsoft.AnalysisServices.AppLocal.Core.dll

md5: 2ACB72F8B7FFFB8D53BC79C412FBD19A | sha1: 6B54CBF8F4305176C4F11737D75FA54C5D694904 | sha256: EAF198781427C8F148022C38FA89E8D6E77DCAD420F5EFC028FAB3E45452D7A3 | sha512: D3AABA6CFE2C6E84E6C04C46E4B9022DAE1B130A95E0D3442EF9F44A9300ED03A17022CFD575DD1FA1A6C188E2B92728293027011C0CB115488B335584473F47

tools\dbatools\bin\smo\Microsoft.AnalysisServices.AppLocal.dll

md5: FCAA6034315522B0A10F18B522A89602 | sha1: F6990976F55616AA986CCEC2719BDB17FA9C00C3 | sha256: 7C8FD89AF1C118D5DC0C46BEC6484358467E6EA278EFB8C5B4CA6B63C62B717D | sha512: 6D622B81BE12A2079BFE7724A5892245F43CEC0581EEFBA33B8A7241AF6E80DD58D239E7D2A42C47E499591865C3A098984C218ED74F6303B559067049E90EEA

tools\dbatools\bin\smo\Microsoft.Azure.KeyVault.Core.dll

md5: 8C454E6D06D56C19F355F702B15EBB15 | sha1: 6D4322B7BC25A50E0C5EFC80DD71824592D3A040 | sha256: 3A1475D6F1A99AB2A85AFEDFF3DB6454D901EBF1DE1D58E294EA2CB16516648A | sha512: 6D1C221430668BE2C7DAAE9D27AAA621038F8F52F5AC3CF9A6D02D10F33E85718E08017E5CF6CDB9E2CB10CE66EB9212DCC6C88FB17C4FB486C7D71720B6BDFB

tools\dbatools\bin\smo\Microsoft.Data.Edm.dll

md5: 383FE8CAD1F26D4A307FFD490B96D307 | sha1: B5D13E6B49B72825627B44C3501091A12580F741 | sha256: 2488A00E8045A929110BC35F4719D40C653C89F1799CB97767CB01FE94CF3E3B | sha512: E8F7A59764BE375BED343E3F60F12A7537973DA219D2101796CCCD455EB70ECD8AF784C0A2A7D96D7FB3D6A4DA73C784889DEC086019CF0D26CB700E738BB042

tools\dbatools\bin\smo\Microsoft.Data.OData.dll

md5: F631F51807B66AC4E3C9869122FC1309 | sha1: 496EBB02213A694101849ADFCE095F4671459D5B | sha256: 9E635E1F33493D570A5C42B394450569B14FF418026FE530CA364FC4AB395778 | sha512: 26FB696407D8218E80995732FA176BD7EDE900C358004AF4B7F5D359863A4ABC1B9462B6BCA3540C72A6A342CFED962252B06D58B63A469148EA48AE6D47AF53

tools\dbatools\bin\smo\Microsoft.Data.Tools.Components.dll

md5: FB02906D3F269BEEB3035CCA0F411E61 | sha1: 204B41159B0A875D24CD5762A98C6CC474A44CE2 | sha256: 5D97EC841E7A696EA54BEB6E499F52B203DED61335C82D63DE2D72C3FCD9121E | sha512: 6F5F9FB92A30038C9839E2524682ED45F0A96604E496D24B3D62E06B2D643CEB8AFD24A641B0DB0C89E52624F5C198033BE482F2539F6F0F29ED9208F56A9C9E

tools\dbatools\bin\diagnosticquery\SQLServerDiagnosticQueries_2016SP2_201810.sql


-- SQL Server 2016 SP2 Diagnostic Information Queries
-- Glenn Berry 
-- Last Modified: November 14, 2018
-- https://www.sqlskills.com/blogs/glenn/
-- http://sqlserverperformance.wordpress.com/
-- Twitter: GlennAlanBerry

-- Please listen to my Pluralsight courses
-- https://www.pluralsight.com/author/glenn-berry

-- If you want to find all of our SQLskills SQL101 blog posts, check out https://bit.ly/2qLwfXW


-- Please make sure you are using the correct version of these diagnostic queries for your version of SQL Server


-- If you like PowerShell, there is a very useful community solution for running these queries in an automated fashion
-- https://dbatools.io/

-- Invoke-DbaDiagnosticQuery
-- https://dbatools.io/functions/invoke-dbadiagnosticquery/


--******************************************************************************
--*   Copyright (C) 2018 Glenn Berry, SQLskills.com
--*   All rights reserved. 
--*
--*   For more scripts and sample code, check out 
--*      https://www.sqlskills.com/blogs/glenn
--*
--*   You may alter this code for your own *non-commercial* purposes. You may
--*   republish altered code as long as you include this copyright and give due credit. 
--*
--*
--*   THIS CODE AND INFORMATION ARE PROVIDED "AS IS" WITHOUT WARRANTY OF 
--*   ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED 
--*   TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A
--*   PARTICULAR PURPOSE. 
--*
--******************************************************************************

-- Check the major product version to see if it is SQL Server 2016 SP2 or greater
IF EXISTS (SELECT * WHERE CONVERT(varchar(128), SERVERPROPERTY('ProductVersion')) LIKE '13%')
	BEGIN
		IF CONVERT(int, SERVERPROPERTY('ProductBuild')) >= 5026
			PRINT N'You have the correct Service Pack of SQL Server 2016 for this diagnostic information script';
		IF CONVERT(int, SERVERPROPERTY('ProductBuild')) < 5026
			PRINT N'You do NOT have the correct Service Pack of SQL Server 2016 for this diagnostic information script';		
	END
ELSE
	BEGIN
		DECLARE @ProductVersion varchar(128) = CONVERT(varchar(128), SERVERPROPERTY('ProductVersion'));
		RAISERROR ('Script does not match the ProductVersion [%s] of this instance. Many of these queries may not work on this version.' , 18 , 16 , @ProductVersion);
	END
	
	

-- Instance level queries *******************************

-- SQL and OS Version information for current instance  (Query 1) (Version Info)
SELECT @@SERVERNAME AS [Server Name], @@VERSION AS [SQL Server and OS Version Info];
------

-- SQL Server 2016 Builds																		
-- Build			Description			Release Date	URL to KB Article								
-- 13.0.5026.0		SP2 RTM				4/24/2018		https://bit.ly/2FEvN2q 
-- 13.0.5149.0		SP2 CU1				5/30/2018		https://support.microsoft.com/en-us/help/4135048/cumulative-update-1-for-sql-server-2016-sp2
-- 13.0.5153.0		SP2 CU2				7/16/2018		https://support.microsoft.com/en-us/help/4340355
-- 13.0.5216.0		SP2 CU3				9/20/2018		https://support.microsoft.com/en-us/help/4458871
-- 13.0.5233.0		SP2 CU4			   11/13/2018		https://support.microsoft.com/en-us/help/4464106/cumulative-update-4-for-sql-server-2016-sp2	

		
															

-- How to determine the version, edition and update level of SQL Server and its components 
-- https://bit.ly/2oAjKgW														

-- How to obtain the latest Service Pack for SQL Server 2016
-- https://bit.ly/2egtfzK

-- SQL Server 2016 build versions 
-- https://bit.ly/2epkTDT

-- Where to find information about the latest SQL Server builds
-- https://bit.ly/2IGHbfY

-- Performance and Stability Related Fixes in Post-SQL Server 2016 SP2 Builds
-- https://bit.ly/2K3LoPf		

-- Announcing updates to the SQL Server Incremental Servicing Model (ISM)
-- https://bit.ly/1RzYITz

-- Update Center for Microsoft SQL Server
-- https://bit.ly/2pZptuQ

-- Download SQL Server Management Studio (SSMS)
-- https://bit.ly/1OcupT9

-- Download and install Azure Data Studio
-- https://bit.ly/2vgke1A



-- Get socket, physical core and logical core count from the SQL Server Error log. (Query 2) (Core Counts)
-- This query might take a few seconds depending on the size of your error log
EXEC sys.xp_readerrorlog 0, 1, N'detected', N'socket';
------

-- This can help you determine the exact core counts used by SQL Server and whether HT is enabled or not
-- It can also help you confirm your SQL Server licensing model
-- Be on the lookout for this message "using 40 logical processors based on SQL Server licensing" 
-- (when you have more than 40 logical cores) which means grandfathered Server/CAL licensing
-- This query will return no results if your error log has been recycled since the instance was last started



-- Get selected server properties (Query 3) (Server Properties)
SELECT SERVERPROPERTY('MachineName') AS [MachineName], 
SERVERPROPERTY('ServerName') AS [ServerName],  
SERVERPROPERTY('InstanceName') AS [Instance], 
SERVERPROPERTY('IsClustered') AS [IsClustered], 
SERVERPROPERTY('ComputerNamePhysicalNetBIOS') AS [ComputerNamePhysicalNetBIOS], 
SERVERPROPERTY('Edition') AS [Edition], 
SERVERPROPERTY('ProductLevel') AS [ProductLevel],				-- What servicing branch (RTM/SP/CU)
SERVERPROPERTY('ProductUpdateLevel') AS [ProductUpdateLevel],	-- Within a servicing branch, what CU# is applied
SERVERPROPERTY('ProductVersion') AS [ProductVersion],
SERVERPROPERTY('ProductMajorVersion') AS [ProductMajorVersion], 
SERVERPROPERTY('ProductMinorVersion') AS [ProductMinorVersion], 
SERVERPROPERTY('ProductBuild') AS [ProductBuild], 
SERVERPROPERTY('ProductBuildType') AS [ProductBuildType],			  -- Is this a GDR or OD hotfix (NULL if on a CU build)
SERVERPROPERTY('ProductUpdateReference') AS [ProductUpdateReference], -- KB article number that is applicable for this build
SERVERPROPERTY('ProcessID') AS [ProcessID],
SERVERPROPERTY('Collation') AS [Collation], 
SERVERPROPERTY('IsFullTextInstalled') AS [IsFullTextInstalled], 
SERVERPROPERTY('IsIntegratedSecurityOnly') AS [IsIntegratedSecurityOnly],
SERVERPROPERTY('FilestreamConfiguredLevel') AS [FilestreamConfiguredLevel],
SERVERPROPERTY('IsHadrEnabled') AS [IsHadrEnabled], 
SERVERPROPERTY('HadrManagerStatus') AS [HadrManagerStatus],
SERVERPROPERTY('InstanceDefaultDataPath') AS [InstanceDefaultDataPath],
SERVERPROPERTY('InstanceDefaultLogPath') AS [InstanceDefaultLogPath],
SERVERPROPERTY('BuildClrVersion') AS [Build CLR Version],
SERVERPROPERTY('IsXTPSupported') AS [IsXTPSupported],
SERVERPROPERTY('IsPolybaseInstalled') AS [IsPolybaseInstalled],				-- New for SQL Server 2016
SERVERPROPERTY('IsAdvancedAnalyticsInstalled') AS [IsRServicesInstalled];	-- New for SQL Server 2016
------

-- This gives you a lot of useful information about your instance of SQL Server,
-- such as the ProcessID for SQL Server and your collation
-- Note: Some columns will be NULL on older SQL Server builds

-- SERVERPROPERTY (Transact-SQL)
-- https://bit.ly/2eeaXeI



-- Get instance-level configuration values for instance  (Query 4) (Configuration Values)
SELECT name, value, value_in_use, minimum, maximum, [description], is_dynamic, is_advanced
FROM sys.configurations WITH (NOLOCK)
ORDER BY name OPTION (RECOMPILE);
------

-- Focus on these settings:
-- automatic soft-NUMA disabled (should be 0 in most cases)
-- backup checksum default (should be 1)
-- backup compression default (should be 1 in most cases)
-- clr enabled (only enable if it is needed)
-- cost threshold for parallelism (depends on your workload)
-- lightweight pooling (should be zero)
-- max degree of parallelism (depends on your workload and hardware)
-- max server memory (MB) (set to an appropriate value, not the default)
-- optimize for ad hoc workloads (should be 1)
-- priority boost (should be zero)
-- remote admin connections (should be 1)


-- sys.configurations (Transact-SQL)
-- https://bit.ly/2HsyDZI


-- Returns a list of all global trace flags that are enabled (Query 5) (Global Trace Flags)
DBCC TRACESTATUS (-1);
------

-- If no global trace flags are enabled, no results will be returned.
-- It is very useful to know what global trace flags are currently enabled as part of the diagnostic process.

-- Common trace flags that should be enabled in most cases
-- TF 3226 - Supresses logging of successful database backup messages to the SQL Server Error Log
--           https://bit.ly/2p6MTjS  

-- TF 6534 - Enables use of native code to improve performance with spatial data
--           https://bit.ly/2HrQUpU         

-- The behavior of TF 1117, 1118 are enabled for tempdb in SQL Server 2016 by default
-- SQL 2016 � It Just Runs Faster: -T1117 and -T1118 changes for TEMPDB and user databases
-- https://bit.ly/2lbNWxK           

-- The behavior of TF 2371 is enabled by default in SQL Server 2016 and newer (in compat level 130 and higher)

-- DBCC TRACEON - Trace Flags (Transact-SQL)
-- https://bit.ly/2FuSvPg





-- Returns status of instant file initialization (Query 6) (IFI Status)
EXEC sys.xp_readerrorlog 0, 1, N'Database Instant File Initialization';
------

-- Lets you determine whether Instant File Initialization (IFI) is enabled for the instance
-- This should be enabled in the vast majority of cases
-- SQL Server 2016 and newer lets you enable this during the SQL server installation process

-- Database Instant File Initialization
-- https://bit.ly/2nTX74y

-- Misconceptions around instant file initialization
-- https://bit.ly/2oBSKgZ



-- SQL Server Process Address space info  (Query 7) (Process Memory)
-- (shows whether locked pages is enabled, among other things)
SELECT physical_memory_in_use_kb/1024 AS [SQL Server Memory Usage (MB)],
	   locked_page_allocations_kb/1024 AS [SQL Server Locked Pages Allocation (MB)],
       large_page_allocations_kb/1024 AS [SQL Server Large Pages Allocation (MB)], 
	   page_fault_count, memory_utilization_percentage, available_commit_limit_kb, 
	   process_physical_memory_low, process_virtual_memory_low
FROM sys.dm_os_process_memory WITH (NOLOCK) OPTION (RECOMPILE);
------

-- You want to see 0 for process_physical_memory_low
-- You want to see 0 for process_virtual_memory_low
-- This indicates that you are not under internal memory pressure
-- If locked_page_allocations_kb > 0, then LPIM is enabled

-- How to enable the "locked pages" feature in SQL Server 2012
-- https://bit.ly/2F5UjOA

-- Memory Management Architecture Guide
-- https://bit.ly/2JKkadC 



-- SQL Server Services information (Query 8) (SQL Server Services Info)
SELECT servicename, process_id, startup_type_desc, status_desc, 
last_startup_time, service_account, is_clustered, cluster_nodename, [filename], 
instant_file_initialization_enabled 
FROM sys.dm_server_services WITH (NOLOCK) OPTION (RECOMPILE);
------

-- Tells you the account being used for the SQL Server Service and the SQL Agent Service
-- Shows the process_id, when they were last started, and their current status
-- Also shows whether you are running on a failover cluster instance, and what node you are running on
-- Also shows whether IFI is enabled

-- sys.dm_server_services (Transact-SQL)
-- https://bit.ly/2oKa1Un


-- Last backup information by database  (Query 9) (Last Backup By Database)
SELECT ISNULL(d.[name], bs.[database_name]) AS [Database], d.recovery_model_desc AS [Recovery Model], 
       d.log_reuse_wait_desc AS [Log Reuse Wait Desc],
    MAX(CASE WHEN [type] = 'D' THEN bs.backup_finish_date ELSE NULL END) AS [Last Full Backup],
    MAX(CASE WHEN [type] = 'I' THEN bs.backup_finish_date ELSE NULL END) AS [Last Differential Backup],
    MAX(CASE WHEN [type] = 'L' THEN bs.backup_finish_date ELSE NULL END) AS [Last Log Backup]
FROM sys.databases AS d WITH (NOLOCK)
LEFT OUTER JOIN msdb.dbo.backupset AS bs WITH (NOLOCK)
ON bs.[database_name] = d.[name] 
AND bs.backup_finish_date > GETDATE()- 30
WHERE d.name <> N'tempdb'
GROUP BY ISNULL(d.[name], bs.[database_name]), d.recovery_model_desc, d.log_reuse_wait_desc, d.[name] 
ORDER BY d.recovery_model_desc, d.[name] OPTION (RECOMPILE);
------

-- This helps you spot runaway transaction logs and other issues with your backup schedule


-- Get SQL Server Agent jobs and Category information (Query 10) (SQL Server Agent Jobs)
SELECT sj.name AS [Job Name], sj.[description] AS [Job Description], SUSER_SNAME(sj.owner_sid) AS [Job Owner],
sj.date_created AS [Date Created], sj.[enabled] AS [Job Enabled], 
sj.notify_email_operator_id, sj.notify_level_email, sc.name AS [CategoryName],
s.[enabled] AS [Sched Enabled], js.next_run_date, js.next_run_time
FROM msdb.dbo.sysjobs AS sj WITH (NOLOCK)
INNER JOIN msdb.dbo.syscategories AS sc WITH (NOLOCK)
ON sj.category_id = sc.category_id
LEFT OUTER JOIN msdb.dbo.sysjobschedules AS js WITH (NOLOCK)
ON sj.job_id = js.job_id
LEFT OUTER JOIN msdb.dbo.sysschedules AS s WITH (NOLOCK)
ON js.schedule_id = s.schedule_id
ORDER BY sj.name OPTION (RECOMPILE);
------

-- Gives you some basic information about your SQL Server Agent jobs, who owns them and how they are configured
-- Look for Agent jobs that are not owned by sa
-- Look for jobs that have a notify_email_operator_id set to 0 (meaning no operator)
-- Look for jobs that have a notify_level_email set to 0 (meaning no e-mail is ever sent)
--
-- MSDN sysjobs documentation
-- https://bit.ly/2paDEOP 

-- SQL Server Maintenance Solution
-- https://bit.ly/1pgchQu  


-- Get SQL Server Agent Alert Information (Query 11) (SQL Server Agent Alerts)
SELECT name, event_source, message_id, severity, [enabled], has_notification, 
       delay_between_responses, occurrence_count, last_occurrence_date, last_occurrence_time
FROM msdb.dbo.sysalerts WITH (NOLOCK)
ORDER BY name OPTION (RECOMPILE);
------

-- Gives you some basic information about your SQL Server Agent Alerts 
-- (which are different from SQL Server Agent jobs)
-- Read more about Agent Alerts here: https://bit.ly/2Giz0Xf 



-- Windows information (Query 12) (Windows Info)
SELECT windows_release, windows_service_pack_level, 
       windows_sku, os_language_version
FROM sys.dm_os_windows_info WITH (NOLOCK) OPTION (RECOMPILE);
------

-- Gives you major OS version, Service Pack, Edition, and language info for the operating system
-- 10.0 is either Windows 10 or Windows Server 2016
-- 6.3 is either Windows 8.1 or Windows Server 2012 R2 
-- 6.2 is either Windows 8 or Windows Server 2012


-- Windows SKU codes
-- 4 is Enterprise Edition
-- 7 is Standard Server Edition
-- 8 is Datacenter Server Edition
-- 10 is Enterprise Server Edition
-- 48 is Professional Edition
-- 161 is Pro for Workstations

-- 1033 for os_language_version is US-English

-- SQL Server 2016 requires Windows Server 2012 or newer

-- Quick-Start Installation of SQL Server 2016
-- https://bit.ly/2qtxQ3G

-- Hardware and Software Requirements for Installing SQL Server 2016
-- https://bit.ly/2JJIUTl

-- Using SQL Server in Windows 8 and later versions of Windows operating system 
-- https://bit.ly/2F7Ax0P


-- SQL Server NUMA Node information  (Query 13) (SQL Server NUMA Info)
SELECT node_id, node_state_desc, memory_node_id, processor_group, cpu_count, online_scheduler_count, 
       idle_scheduler_count, active_worker_count, avg_load_balance, resource_monitor_state
FROM sys.dm_os_nodes WITH (NOLOCK) 
WHERE node_state_desc <> N'ONLINE DAC' OPTION (RECOMPILE);
------

-- Gives you some useful information about the composition and relative load on your NUMA nodes
-- You want to see an equal number of schedulers on each NUMA node
-- Watch out if SQL Server 2017 Standard Edition has been installed 
-- on a physical or virtual machine with more than four sockets or more than 24 physical cores

-- sys.dm_os_nodes (Transact-SQL)
-- https://bit.ly/2pn5Mw8

-- Balancing Your Available SQL Server Core Licenses Evenly Across NUMA Nodes
-- https://bit.ly/2vfC4Rq



-- Good basic information about OS memory amounts and state  (Query 14) (System Memory)
SELECT total_physical_memory_kb/1024 AS [Physical Memory (MB)], 
       available_physical_memory_kb/1024 AS [Available Memory (MB)], 
       total_page_file_kb/1024 AS [Total Page File (MB)], 
	   available_page_file_kb/1024 AS [Available Page File (MB)], 
	   system_cache_kb/1024 AS [System Cache (MB)],
       system_memory_state_desc AS [System Memory State]
FROM sys.dm_os_sys_memory WITH (NOLOCK) OPTION (RECOMPILE);
------

-- You want to see "Available physical memory is high" for System Memory State
-- This indicates that you are not under external memory pressure

-- Possible System Memory State values:
-- Available physical memory is high
-- Physical memory usage is steady
-- Available physical memory is low
-- Available physical memory is running low
-- Physical memory state is transitioning

-- sys.dm_os_sys_memory (Transact-SQL)
-- https://bit.ly/2pcV0xq



-- You can skip the next two queries if you know you don't have a clustered instance


-- Get information about your cluster nodes and their status  (Query 15) (Cluster Node Properties)
-- (if your database server is in a failover cluster)
SELECT NodeName, status_description, is_current_owner
FROM sys.dm_os_cluster_nodes WITH (NOLOCK) OPTION (RECOMPILE);
------

-- Knowing which node owns the cluster resources is critical
-- Especially when you are installing Windows or SQL Server updates
-- You will see no results if your instance is not clustered

-- Recommended hotfixes and updates for Windows Server 2012 R2-based failover clusters
-- https://bit.ly/1z5BfCw


-- Get information about any AlwaysOn AG cluster this instance is a part of (Query 16) (AlwaysOn AG Cluster)
SELECT cluster_name, quorum_type_desc, quorum_state_desc
FROM sys.dm_hadr_cluster WITH (NOLOCK) OPTION (RECOMPILE);
------

-- You will see no results if your instance is not using AlwaysOn AGs


-- Good overview of AG health and status (Query 17) (AlwaysOn AG Status)
SELECT ag.name AS [AG Name], ar.replica_server_name, ar.availability_mode_desc, adc.[database_name], 
       drs.is_local, drs.is_primary_replica, drs.synchronization_state_desc, drs.is_commit_participant, 
	   drs.synchronization_health_desc, drs.recovery_lsn, drs.truncation_lsn, drs.last_sent_lsn, 
	   drs.last_sent_time, drs.last_received_lsn, drs.last_received_time, drs.last_hardened_lsn, 
	   drs.last_hardened_time, drs.last_redone_lsn, drs.last_redone_time, drs.log_send_queue_size, 
	   drs.log_send_rate, drs.redo_queue_size, drs.redo_rate, drs.filestream_send_rate, 
	   drs.end_of_log_lsn, drs.last_commit_lsn, drs.last_commit_time, drs.database_state_desc 
FROM sys.dm_hadr_database_replica_states AS drs WITH (NOLOCK)
INNER JOIN sys.availability_databases_cluster AS adc WITH (NOLOCK)
ON drs.group_id = adc.group_id 
AND drs.group_database_id = adc.group_database_id
INNER JOIN sys.availability_groups AS ag WITH (NOLOCK)
ON ag.group_id = drs.group_id
INNER JOIN sys.availability_replicas AS ar WITH (NOLOCK)
ON drs.group_id = ar.group_id 
AND drs.replica_id = ar.replica_id
ORDER BY ag.name, ar.replica_server_name, adc.[database_name] OPTION (RECOMPILE);

-- You will see no results if your instance is not using AlwaysOn AGs

-- SQL Server 2016 � It Just Runs Faster: Always On Availability Groups Turbocharged
-- https://bit.ly/2dn1H6r


-- Hardware information from SQL Server 2016 SP2  (Query 18) (Hardware Info)
SELECT cpu_count AS [Logical CPU Count], scheduler_count, 
       (socket_count * cores_per_socket) AS [Physical Core Count], 
       socket_count AS [Socket Count], cores_per_socket, numa_node_count,
       physical_memory_kb/1024 AS [Physical Memory (MB)], 
       max_workers_count AS [Max Workers Count], 
	   affinity_type_desc AS [Affinity Type], 
       sqlserver_start_time AS [SQL Server Start Time],
	   DATEDIFF(hour, sqlserver_start_time, GETDATE()) AS [SQL Server Up Time (hrs)],
	   virtual_machine_type_desc AS [Virtual Machine Type], 
       softnuma_configuration_desc AS [Soft NUMA Configuration], 
	   sql_memory_model_desc
FROM sys.dm_os_sys_info WITH (NOLOCK) OPTION (RECOMPILE);
------

-- Gives you some good basic hardware information about your database server
-- Note: virtual_machine_type_desc of HYPERVISOR does not automatically mean you are running SQL Server inside of a VM
-- It merely indicates that you have a hypervisor running on your host

-- sys.dm_os_sys_info (Transact-SQL)
-- https://bit.ly/2pczOYs

-- Soft NUMA configuration was a new column for SQL Server 2016
-- OFF = Soft-NUMA feature is OFF
-- ON = SQL Server automatically determines the NUMA node sizes for Soft-NUMA
-- MANUAL = Manually configured soft-NUMA

-- Configure SQL Server to Use Soft-NUMA (SQL Server)
-- https://bit.ly/2HTpKJt

-- sql_memory_model_desc values (Added in SQL Server 2016 SP1)
-- CONVENTIONAL
-- LOCK_PAGES
-- LARGE_PAGES
   

-- Get System Manufacturer and model number from SQL Server Error log (Query 19) (System Manufacturer)
EXEC sys.xp_readerrorlog 0, 1, N'Manufacturer';
------ 

-- This can help you determine the capabilities and capacities of your database server
-- Can also be used to confirm if you are running in a VM
-- This query might take a few seconds if you have not recycled your error log recently
-- This query will return no results if your error log has been recycled since the instance was started


-- Get pvscsi info from Windows Registry  (Query 20) (PVSCSI Driver Parameters)
EXEC sys.xp_instance_regread N'HKEY_LOCAL_MACHINE', N'SYSTEM\CurrentControlSet\services\pvscsi\Parameters\Device', N'DriverParameter';
------

-- This is valid for VMware VMs
-- Recommended value for intensive I/O patterns from VMware is: RequestRingPages=32,MaxQueueDepth=254
-- https://kb.vmware.com/s/article/2053145



-- Get BIOS date from Windows Registry (Query 21) (BIOS Date)
EXEC sys.xp_instance_regread N'HKEY_LOCAL_MACHINE', N'HARDWARE\DESCRIPTION\System\BIOS', N'BiosReleaseDate';
------

-- Helps you understand whether the main system BIOS is up to date, and the possible age of the hardware
-- Not as useful for virtualization


-- Get processor description from Windows Registry  (Query 22) (Processor Description)
EXEC sys.xp_instance_regread N'HKEY_LOCAL_MACHINE', N'HARDWARE\DESCRIPTION\System\CentralProcessor\0', N'ProcessorNameString';
------

-- Gives you the model number and rated clock speed of your processor(s)
-- Your processors may be running at less than the rated clock speed due
-- to the Windows Power Plan or hardware power management

-- You can use CPU-Z to get your actual CPU core speed and a lot of other useful information
-- https://bit.ly/QhR6xF

-- You can learn more about processor selection for SQL Server by following this link
-- https://bit.ly/2F3aVlP



-- See if buffer pool extension (BPE) is enabled (Query 23) (BPE Configuration)
SELECT [path], state_description, current_size_in_kb, 
CAST(current_size_in_kb/1048576.0 AS DECIMAL(10,2)) AS [Size (GB)]
FROM sys.dm_os_buffer_pool_extension_configuration WITH (NOLOCK) OPTION (RECOMPILE);
------

-- BPE is available in both Standard Edition and Enterprise Edition
-- It is a more interesting feature for Standard Edition

-- Buffer Pool Extension to SSDs in SQL Server 2014
-- https://bit.ly/1bm08m8

-- Buffer Pool Extension
-- https://bit.ly/2oBuieO



-- Look at buffer descriptors to see BPE usage by database (Query 24) (BPE Usage) 
SELECT DB_NAME(database_id) AS [Database Name], COUNT(page_id) AS [Page Count],
CAST(COUNT(*)/128.0 AS DECIMAL(10, 2)) AS [Buffer size(MB)], 
AVG(read_microsec) AS [Avg Read Time (microseconds)]
FROM sys.dm_os_buffer_descriptors WITH (NOLOCK)
WHERE database_id <> 32767
AND is_in_bpool_extension = 1
GROUP BY DB_NAME(database_id) 
ORDER BY [Buffer size(MB)] DESC OPTION (RECOMPILE);
------

-- You will see no results if BPE is not enabled or if there is no BPE usage


-- Get information on location, time and size of any memory dumps from SQL Server  (Query 25) (Memory Dump Info)
SELECT [filename], creation_time, size_in_bytes/1048576.0 AS [Size (MB)]
FROM sys.dm_server_memory_dumps WITH (NOLOCK) 
ORDER BY creation_time DESC OPTION (RECOMPILE);
------

-- This will not return any rows if you have 
-- not had any memory dumps (which is a good thing)

-- sys.dm_server_memory_dumps (Transact-SQL)
-- https://bit.ly/2elwWll



-- Look at Suspect Pages table (Query 26) (Suspect Pages)
SELECT DB_NAME(database_id) AS [Database Name], [file_id], page_id, 
       event_type, error_count, last_update_date 
FROM msdb.dbo.suspect_pages WITH (NOLOCK)
ORDER BY database_id OPTION (RECOMPILE);
------

-- event_type value descriptions
-- 1 = 823 error caused by an operating system CRC error
--     or 824 error other than a bad checksum or a torn page (for example, a bad page ID)
-- 2 = Bad checksum
-- 3 = Torn page
-- 4 = Restored (The page was restored after it was marked bad)
-- 5 = Repaired (DBCC repaired the page)
-- 7 = Deallocated by DBCC

-- Ideally, this query returns no results. The table is limited to 1000 rows.
-- If you do get results here, you should do further investigation to determine the root cause

-- Manage the suspect_pages Table
-- https://bit.ly/2Fvr1c9


-- Get number of data files in tempdb database (Query 27) (TempDB Data Files)
EXEC sys.xp_readerrorlog 0, 1, N'The tempdb database has';
------

-- Get the number of data files in the tempdb database
-- 4-8 data files that are all the same size is a good starting point
-- This query will return no results if your error log has been recycled since the instance was last started


-- File names and paths for all user and system databases on instance  (Query 28) (Database Filenames and Paths)
SELECT DB_NAME([database_id]) AS [Database Name], 
       [file_id], [name], physical_name, [type_desc], state_desc,
	   is_percent_growth, growth,
	   CONVERT(bigint, growth/128.0) AS [Growth in MB], 
       CONVERT(bigint, size/128.0) AS [Total Size in MB]
FROM sys.master_files WITH (NOLOCK)
ORDER BY DB_NAME([database_id]), [file_id] OPTION (RECOMPILE);
------

-- Things to look at:
-- Are data files and log files on different drives?
-- Is everything on the C: drive?
-- Is tempdb on dedicated drives?
-- Is there only one tempdb data file?
-- Are all of the tempdb data files the same size?
-- Are there multiple data files for user databases?
-- Is percent growth enabled for any files (which is bad)?



-- Volume info for all LUNS that have database files on the current instance (Query 29) (Volume Info)
SELECT DISTINCT vs.volume_mount_point, vs.file_system_type, vs.logical_volume_name, 
CONVERT(DECIMAL(18,2), vs.total_bytes/1073741824.0) AS [Total Size (GB)],
CONVERT(DECIMAL(18,2), vs.available_bytes/1073741824.0) AS [Available Size (GB)],  
CONVERT(DECIMAL(18,2), vs.available_bytes * 1. / vs.total_bytes * 100.) AS [Space Free %],
vs.supports_compression, vs.is_compressed, 
vs.supports_sparse_files, vs.supports_alternate_streams
FROM sys.master_files AS f WITH (NOLOCK)
CROSS APPLY sys.dm_os_volume_stats(f.database_id, f.[file_id]) AS vs 
ORDER BY vs.volume_mount_point OPTION (RECOMPILE);
------

-- Shows you the total and free space on the LUNs where you have database files
-- Being low on free space can negatively affect performance

-- sys.dm_os_volume_stats (Transact-SQL)
-- https://bit.ly/2oBPNNr



-- Drive level latency information (Query 30) (Drive Level Latency)
-- Based on code from Jimmy May
SELECT tab.[Drive], tab.volume_mount_point AS [Volume Mount Point], 
	CASE 
		WHEN num_of_reads = 0 THEN 0 
		ELSE (io_stall_read_ms/num_of_reads) 
	END AS [Read Latency],
	CASE 
		WHEN num_of_writes = 0 THEN 0 
		ELSE (io_stall_write_ms/num_of_writes) 
	END AS [Write Latency],
	CASE 
		WHEN (num_of_reads = 0 AND num_of_writes = 0) THEN 0 
		ELSE (io_stall/(num_of_reads + num_of_writes)) 
	END AS [Overall Latency],
	CASE 
		WHEN num_of_reads = 0 THEN 0 
		ELSE (num_of_bytes_read/num_of_reads) 
	END AS [Avg Bytes/Read],
	CASE 
		WHEN num_of_writes = 0 THEN 0 
		ELSE (num_of_bytes_written/num_of_writes) 
	END AS [Avg Bytes/Write],
	CASE 
		WHEN (num_of_reads = 0 AND num_of_writes = 0) THEN 0 
		ELSE ((num_of_bytes_read + num_of_bytes_written)/(num_of_reads + num_of_writes)) 
	END AS [Avg Bytes/Transfer]
FROM (SELECT LEFT(UPPER(mf.physical_name), 2) AS Drive, SUM(num_of_reads) AS num_of_reads,
	         SUM(io_stall_read_ms) AS io_stall_read_ms, SUM(num_of_writes) AS num_of_writes,
	         SUM(io_stall_write_ms) AS io_stall_write_ms, SUM(num_of_bytes_read) AS num_of_bytes_read,
	         SUM(num_of_bytes_written) AS num_of_bytes_written, SUM(io_stall) AS io_stall, vs.volume_mount_point 
      FROM sys.dm_io_virtual_file_stats(NULL, NULL) AS vfs
      INNER JOIN sys.master_files AS mf WITH (NOLOCK)
      ON vfs.database_id = mf.database_id AND vfs.file_id = mf.file_id
	  CROSS APPLY sys.dm_os_volume_stats(mf.database_id, mf.[file_id]) AS vs 
      GROUP BY LEFT(UPPER(mf.physical_name), 2), vs.volume_mount_point) AS tab
ORDER BY [Overall Latency] OPTION (RECOMPILE);
------

-- Shows you the drive-level latency for reads and writes, in milliseconds
-- Latency above 30-40ms is usually a problem
-- These latency numbers include all file activity against all SQL Server 
-- database files on each drive since SQL Server was last started


-- Calculates average stalls per read, per write, and per total input/output for each database file  (Query 31) (IO Latency by File)
SELECT DB_NAME(fs.database_id) AS [Database Name], CAST(fs.io_stall_read_ms/(1.0 + fs.num_of_reads) AS NUMERIC(10,1)) AS [avg_read_latency_ms],
CAST(fs.io_stall_write_ms/(1.0 + fs.num_of_writes) AS NUMERIC(10,1)) AS [avg_write_latency_ms],
CAST((fs.io_stall_read_ms + fs.io_stall_write_ms)/(1.0 + fs.num_of_reads + fs.num_of_writes) AS NUMERIC(10,1)) AS [avg_io_latency_ms],
CONVERT(DECIMAL(18,2), mf.size/128.0) AS [File Size (MB)], mf.physical_name, mf.type_desc, fs.io_stall_read_ms, fs.num_of_reads, 
fs.io_stall_write_ms, fs.num_of_writes, fs.io_stall_read_ms + fs.io_stall_write_ms AS [io_stalls], fs.num_of_reads + fs.num_of_writes AS [total_io],
io_stall_queued_read_ms AS [Resource Governor Total Read IO Latency (ms)], io_stall_queued_write_ms AS [Resource Governor Total Write IO Latency (ms)] 
FROM sys.dm_io_virtual_file_stats(null,null) AS fs
INNER JOIN sys.master_files AS mf WITH (NOLOCK)
ON fs.database_id = mf.database_id
AND fs.[file_id] = mf.[file_id]
ORDER BY avg_io_latency_ms DESC OPTION (RECOMPILE);
------

-- Helps determine which database files on the entire instance have the most I/O bottlenecks
-- This can help you decide whether certain LUNs are overloaded and whether you might
-- want to move some files to a different location or perhaps improve your I/O performance
-- These latency numbers include all file activity against each SQL Server 
-- database file since SQL Server was last started


-- Look for I/O requests taking longer than 15 seconds in the six most recent SQL Server Error Logs (Query 32) (IO Warnings)
CREATE TABLE #IOWarningResults(LogDate datetime, ProcessInfo sysname, LogText nvarchar(1000));

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 0, 1, N'taking longer than 15 seconds';

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 1, 1, N'taking longer than 15 seconds';

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 2, 1, N'taking longer than 15 seconds';

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 3, 1, N'taking longer than 15 seconds';

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 4, 1, N'taking longer than 15 seconds';

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 5, 1, N'taking longer than 15 seconds';

SELECT LogDate, ProcessInfo, LogText
FROM #IOWarningResults
ORDER BY LogDate DESC;

DROP TABLE #IOWarningResults;
------  

-- Finding 15 second I/O warnings in the SQL Server Error Log is useful evidence of
-- poor I/O performance (which might have many different causes)
-- Look to see if you see any patterns in the results (same files, same drives, same time of day, etc.)

-- Diagnostics in SQL Server help detect stalled and stuck I/O operations
-- https://bit.ly/2qtaw73



-- Resource Governor Resource Pool information (Query 33) (RG Resource Pools)
SELECT pool_id, [Name], statistics_start_time,
       min_memory_percent, max_memory_percent,  
       max_memory_kb/1024 AS [max_memory_mb],  
       used_memory_kb/1024 AS [used_memory_mb],   
       target_memory_kb/1024 AS [target_memory_mb],
	   min_iops_per_volume, max_iops_per_volume
FROM sys.dm_resource_governor_resource_pools WITH (NOLOCK)
OPTION (RECOMPILE);
------

-- sys.dm_resource_governor_resource_pools (Transact-SQL)
-- https://bit.ly/2MVU0Vy
   


-- Recovery model, log reuse wait description, log file size, log usage size  (Query 34) (Database Properties)
-- and compatibility level for all databases on instance
SELECT db.[name] AS [Database Name], SUSER_SNAME(db.owner_sid) AS [Database Owner], db.recovery_model_desc AS [Recovery Model], 
db.state_desc, db.containment_desc, db.log_reuse_wait_desc AS [Log Reuse Wait Description], 
CONVERT(DECIMAL(18,2), ls.cntr_value/1024.0) AS [Log Size (MB)], CONVERT(DECIMAL(18,2), lu.cntr_value/1024.0) AS [Log Used (MB)],
CAST(CAST(lu.cntr_value AS FLOAT) / CAST(ls.cntr_value AS FLOAT)AS DECIMAL(18,2)) * 100 AS [Log Used %], 
db.[compatibility_level] AS [DB Compatibility Level], 
db.is_mixed_page_allocation_on, db.page_verify_option_desc AS [Page Verify Option], 
db.is_auto_create_stats_on, db.is_auto_update_stats_on, db.is_auto_update_stats_async_on, db.is_parameterization_forced, 
db.snapshot_isolation_state_desc, db.is_read_committed_snapshot_on, db.is_auto_close_on, db.is_auto_shrink_on, 
db.target_recovery_time_in_seconds, db.is_cdc_enabled, db.is_published, db.is_distributor,
db.group_database_id, db.replica_id,db.is_memory_optimized_elevate_to_snapshot_on, 
db.delayed_durability_desc, db.is_auto_create_stats_incremental_on,
db.is_query_store_on, db.is_sync_with_backup, 
db.is_supplemental_logging_enabled, db.is_remote_data_archive_enabled,
db.is_encrypted, de.encryption_state, de.percent_complete, de.key_algorithm, de.key_length      
FROM sys.databases AS db WITH (NOLOCK)
INNER JOIN sys.dm_os_performance_counters AS lu WITH (NOLOCK)
ON db.name = lu.instance_name
INNER JOIN sys.dm_os_performance_counters AS ls WITH (NOLOCK)
ON db.name = ls.instance_name
LEFT OUTER JOIN sys.dm_database_encryption_keys AS de WITH (NOLOCK)
ON db.database_id = de.database_id
WHERE lu.counter_name LIKE N'Log File(s) Used Size (KB)%' 
AND ls.counter_name LIKE N'Log File(s) Size (KB)%'
AND ls.cntr_value > 0 
ORDER BY db.[name] OPTION (RECOMPILE);
------

-- Things to look at:
-- How many databases are on the instance?
-- What recovery models are they using?
-- What is the log reuse wait description?
-- How full are the transaction logs?
-- What compatibility level are the databases on? 
-- What is the Page Verify Option? (should be CHECKSUM)
-- Is Auto Update Statistics Asynchronously enabled?
-- Is Delayed Durability enabled
-- Make sure auto_shrink and auto_close are not enabled!

-- is_mixed_page_allocation_on is a new property for SQL Server 2016. Equivalent to TF 1118 for a user database
-- SQL Server 2016: Changes in default behavior for autogrow and allocations for tempdb and user databases
-- https://bit.ly/2evRZSR

-- A non-zero value for target_recovery_time_in_seconds means that indirect checkpoint is enabled 
-- If the setting has a zero value it indicates that automatic checkpoint is enabled

-- Changes in SQL Server 2016 Checkpoint Behavior
-- https://bit.ly/2pdggk3


-- Missing Indexes for all databases by Index Advantage  (Query 35) (Missing Indexes All Databases)
SELECT CONVERT(decimal(18,2), user_seeks * avg_total_user_cost * (avg_user_impact * 0.01)) AS [index_advantage],
FORMAT(migs.last_user_seek, 'yyyy-MM-dd HH:mm:ss') AS [last_user_seek], 
mid.[statement] AS [Database.Schema.Table],
COUNT(1) OVER(PARTITION BY mid.[statement]) AS [missing_indexes_for_table],
COUNT(1) OVER(PARTITION BY mid.[statement], equality_columns) AS [similar_missing_indexes_for_table],
mid.equality_columns, mid.inequality_columns, mid.included_columns,
migs.unique_compiles, migs.user_seeks, 
CONVERT(decimal(18,2), migs.avg_total_user_cost) AS [avg_total_user_cost], migs.avg_user_impact 
FROM sys.dm_db_missing_index_group_stats AS migs WITH (NOLOCK)
INNER JOIN sys.dm_db_missing_index_groups AS mig WITH (NOLOCK)
ON migs.group_handle = mig.index_group_handle
INNER JOIN sys.dm_db_missing_index_details AS mid WITH (NOLOCK)
ON mig.index_handle = mid.index_handle
ORDER BY index_advantage DESC OPTION (RECOMPILE);
------

-- Getting missing index information for all of the databases on the instance is very useful
-- Look at last user seek time, number of user seeks to help determine source and importance
-- Also look at avg_user_impact and avg_total_user_cost to help determine importance
-- SQL Server is overly eager to add included columns, so beware
-- Do not just blindly add indexes that show up from this query!!!

-- SQL Server Index Design Guide
-- https://bit.ly/2qtZr4N



-- Get VLF Counts for all databases on the instance (Query 36) (VLF Counts)
SELECT [name] AS [Database Name], [VLF Count]
FROM sys.databases AS db WITH (NOLOCK)
CROSS APPLY (SELECT file_id, COUNT(*) AS [VLF Count]
		     FROM sys.dm_db_log_info(db.database_id)
			 GROUP BY file_id) AS li
ORDER BY [VLF Count] DESC OPTION (RECOMPILE);
------

-- High VLF counts can affect write performance to the log file
-- and they can make full database restores and crash recovery take much longer
-- Try to keep your VLF counts under 200 in most cases (depending on log file size)

-- Important change to VLF creation algorithm in SQL Server 2014
-- https://bit.ly/2Hsjbg4

-- SQL Server Transaction Log Architecture and Management Guide
-- https://bit.ly/2JjmQRZ



-- Get CPU utilization by database (Query 37) (CPU Usage by Database)
WITH DB_CPU_Stats
AS
(SELECT pa.DatabaseID, DB_Name(pa.DatabaseID) AS [Database Name], SUM(qs.total_worker_time/1000) AS [CPU_Time_Ms]
 FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
 CROSS APPLY (SELECT CONVERT(int, value) AS [DatabaseID] 
              FROM sys.dm_exec_plan_attributes(qs.plan_handle)
              WHERE attribute = N'dbid') AS pa
 GROUP BY DatabaseID)
SELECT ROW_NUMBER() OVER(ORDER BY [CPU_Time_Ms] DESC) AS [CPU Rank],
       [Database Name], [CPU_Time_Ms] AS [CPU Time (ms)], 
       CAST([CPU_Time_Ms] * 1.0 / SUM([CPU_Time_Ms]) OVER() * 100.0 AS DECIMAL(5, 2)) AS [CPU Percent]
FROM DB_CPU_Stats
WHERE DatabaseID <> 32767 -- ResourceDB
ORDER BY [CPU Rank] OPTION (RECOMPILE);
------

-- Helps determine which database is using the most CPU resources on the instance


-- Get I/O utilization by database (Query 38) (IO Usage By Database)
WITH Aggregate_IO_Statistics
AS (SELECT DB_NAME(database_id) AS [Database Name],
    CAST(SUM(num_of_bytes_read + num_of_bytes_written) / 1048576 AS DECIMAL(12, 2)) AS [ioTotalMB],
    CAST(SUM(num_of_bytes_read ) / 1048576 AS DECIMAL(12, 2)) AS [ioReadMB],
    CAST(SUM(num_of_bytes_written) / 1048576 AS DECIMAL(12, 2)) AS [ioWriteMB]
    FROM sys.dm_io_virtual_file_stats(NULL, NULL) AS [DM_IO_STATS]
    GROUP BY database_id)
SELECT ROW_NUMBER() OVER (ORDER BY ioTotalMB DESC) AS [I/O Rank],
        [Database Name], ioTotalMB AS [Total I/O (MB)],
        CAST(ioTotalMB / SUM(ioTotalMB) OVER () * 100.0 AS DECIMAL(5, 2)) AS [Total I/O %],
        ioReadMB AS [Read I/O (MB)], 
		CAST(ioReadMB / SUM(ioReadMB) OVER () * 100.0 AS DECIMAL(5, 2)) AS [Read I/O %],
        ioWriteMB AS [Write I/O (MB)], 
		CAST(ioWriteMB / SUM(ioWriteMB) OVER () * 100.0 AS DECIMAL(5, 2)) AS [Write I/O %]
FROM Aggregate_IO_Statistics
ORDER BY [I/O Rank] OPTION (RECOMPILE);
------

-- Helps determine which database is using the most I/O resources on the instance
-- These numbers are cumulative since the last service restart
-- They include all I/O activity, not just the nominal I/O workload


-- Get total buffer usage by database for current instance  (Query 39) (Total Buffer Usage by Database)
-- This make take some time to run on a busy instance
WITH AggregateBufferPoolUsage
AS
(SELECT DB_NAME(database_id) AS [Database Name],
CAST(COUNT(*) * 8/1024.0 AS DECIMAL (10,2))  AS [CachedSize]
FROM sys.dm_os_buffer_descriptors WITH (NOLOCK)
WHERE database_id <> 32767 -- ResourceDB
GROUP BY DB_NAME(database_id))
SELECT ROW_NUMBER() OVER(ORDER BY CachedSize DESC) AS [Buffer Pool Rank], [Database Name], CachedSize AS [Cached Size (MB)],
       CAST(CachedSize / SUM(CachedSize) OVER() * 100.0 AS DECIMAL(5,2)) AS [Buffer Pool Percent]
FROM AggregateBufferPoolUsage
ORDER BY [Buffer Pool Rank] OPTION (RECOMPILE);
------

-- Tells you how much memory (in the buffer pool) 
-- is being used by each database on the instance


-- Get tempdb version store space usage by database (Query 40) (Version Store Space Usage)
SELECT DB_NAME(database_id) AS [Database Name],
       reserved_page_count AS [Version Store Reserved Page Count], 
	   reserved_space_kb/1024 AS [Version Store Reserved Space (MB)] 
FROM sys.dm_tran_version_store_space_usage WITH (NOLOCK) 
ORDER BY reserved_space_kb/1024 DESC OPTION (RECOMPILE);
------  

-- sys.dm_tran_version_store_space_usage (Transact-SQL)
-- https://bit.ly/2vh3Bmk




-- Clear Wait Stats with this command
-- DBCC SQLPERF('sys.dm_os_wait_stats', CLEAR);

-- Isolate top waits for server instance since last restart or wait statistics clear  (Query 41) (Top Waits)
WITH [Waits] 
AS (SELECT wait_type, wait_time_ms/ 1000.0 AS [WaitS],
          (wait_time_ms - signal_wait_time_ms) / 1000.0 AS [ResourceS],
           signal_wait_time_ms / 1000.0 AS [SignalS],
           waiting_tasks_count AS [WaitCount],
           100.0 *  wait_time_ms / SUM (wait_time_ms) OVER() AS [Percentage],
           ROW_NUMBER() OVER(ORDER BY wait_time_ms DESC) AS [RowNum]
    FROM sys.dm_os_wait_stats WITH (NOLOCK)
    WHERE [wait_type] NOT IN (
        N'BROKER_EVENTHANDLER', N'BROKER_RECEIVE_WAITFOR', N'BROKER_TASK_STOP',
		N'BROKER_TO_FLUSH', N'BROKER_TRANSMITTER', N'CHECKPOINT_QUEUE',
        N'CHKPT', N'CLR_AUTO_EVENT', N'CLR_MANUAL_EVENT', N'CLR_SEMAPHORE', N'CXCONSUMER',
        N'DBMIRROR_DBM_EVENT', N'DBMIRROR_EVENTS_QUEUE', N'DBMIRROR_WORKER_QUEUE',
		N'DBMIRRORING_CMD', N'DIRTY_PAGE_POLL', N'DISPATCHER_QUEUE_SEMAPHORE',
        N'EXECSYNC', N'FSAGENT', N'FT_IFTS_SCHEDULER_IDLE_WAIT', N'FT_IFTSHC_MUTEX',
        N'HADR_CLUSAPI_CALL', N'HADR_FILESTREAM_IOMGR_IOCOMPLETION', N'HADR_LOGCAPTURE_WAIT', 
		N'HADR_NOTIFICATION_DEQUEUE', N'HADR_TIMER_TASK', N'HADR_WORK_QUEUE',
        N'KSOURCE_WAKEUP', N'LAZYWRITER_SLEEP', N'LOGMGR_QUEUE', 
		N'MEMORY_ALLOCATION_EXT', N'ONDEMAND_TASK_QUEUE',
		N'PARALLEL_REDO_DRAIN_WORKER', N'PARALLEL_REDO_LOG_CACHE', N'PARALLEL_REDO_TRAN_LIST',
		N'PARALLEL_REDO_WORKER_SYNC', N'PARALLEL_REDO_WORKER_WAIT_WORK',
		N'PREEMPTIVE_HADR_LEASE_MECHANISM', N'PREEMPTIVE_SP_SERVER_DIAGNOSTICS',
		N'PREEMPTIVE_OS_LIBRARYOPS', N'PREEMPTIVE_OS_COMOPS', N'PREEMPTIVE_OS_CRYPTOPS',
		N'PREEMPTIVE_OS_PIPEOPS', N'PREEMPTIVE_OS_AUTHENTICATIONOPS',
		N'PREEMPTIVE_OS_GENERICOPS', N'PREEMPTIVE_OS_VERIFYTRUST',
		N'PREEMPTIVE_OS_FILEOPS', N'PREEMPTIVE_OS_DEVICEOPS', N'PREEMPTIVE_OS_QUERYREGISTRY',
		N'PREEMPTIVE_OS_WRITEFILE',
		N'PREEMPTIVE_XE_CALLBACKEXECUTE', N'PREEMPTIVE_XE_DISPATCHER',
		N'PREEMPTIVE_XE_GETTARGETSTATE', N'PREEMPTIVE_XE_SESSIONCOMMIT',
		N'PREEMPTIVE_XE_TARGETINIT', N'PREEMPTIVE_XE_TARGETFINALIZE',
        N'PWAIT_ALL_COMPONENTS_INITIALIZED', N'PWAIT_DIRECTLOGCONSUMER_GETNEXT',
		N'QDS_PERSIST_TASK_MAIN_LOOP_SLEEP',
		N'QDS_ASYNC_QUEUE',
        N'QDS_CLEANUP_STALE_QUERIES_TASK_MAIN_LOOP_SLEEP', N'REQUEST_FOR_DEADLOCK_SEARCH',
		N'RESOURCE_QUEUE', N'SERVER_IDLE_CHECK', N'SLEEP_BPOOL_FLUSH', N'SLEEP_DBSTARTUP',
		N'SLEEP_DCOMSTARTUP', N'SLEEP_MASTERDBREADY', N'SLEEP_MASTERMDREADY',
        N'SLEEP_MASTERUPGRADED', N'SLEEP_MSDBSTARTUP', N'SLEEP_SYSTEMTASK', N'SLEEP_TASK',
        N'SLEEP_TEMPDBSTARTUP', N'SNI_HTTP_ACCEPT', N'SP_SERVER_DIAGNOSTICS_SLEEP',
		N'SQLTRACE_BUFFER_FLUSH', N'SQLTRACE_INCREMENTAL_FLUSH_SLEEP', N'SQLTRACE_WAIT_ENTRIES',
		N'WAIT_FOR_RESULTS', N'WAITFOR', N'WAITFOR_TASKSHUTDOWN', N'WAIT_XTP_HOST_WAIT',
		N'WAIT_XTP_OFFLINE_CKPT_NEW_LOG', N'WAIT_XTP_CKPT_CLOSE', N'WAIT_XTP_RECOVERY',
		N'XE_BUFFERMGR_ALLPROCESSED_EVENT', N'XE_DISPATCHER_JOIN',
        N'XE_DISPATCHER_WAIT', N'XE_LIVE_TARGET_TVF', N'XE_TIMER_EVENT')
    AND waiting_tasks_count > 0)
SELECT
    MAX (W1.wait_type) AS [WaitType],
	CAST (MAX (W1.Percentage) AS DECIMAL (5,2)) AS [Wait Percentage],
	CAST ((MAX (W1.WaitS) / MAX (W1.WaitCount)) AS DECIMAL (16,4)) AS [AvgWait_Sec],
    CAST ((MAX (W1.ResourceS) / MAX (W1.WaitCount)) AS DECIMAL (16,4)) AS [AvgRes_Sec],
    CAST ((MAX (W1.SignalS) / MAX (W1.WaitCount)) AS DECIMAL (16,4)) AS [AvgSig_Sec], 
    CAST (MAX (W1.WaitS) AS DECIMAL (16,2)) AS [Wait_Sec],
    CAST (MAX (W1.ResourceS) AS DECIMAL (16,2)) AS [Resource_Sec],
    CAST (MAX (W1.SignalS) AS DECIMAL (16,2)) AS [Signal_Sec],
    MAX (W1.WaitCount) AS [Wait Count],
	CAST (N'https://www.sqlskills.com/help/waits/' + W1.wait_type AS XML) AS [Help/Info URL]
FROM Waits AS W1
INNER JOIN Waits AS W2
ON W2.RowNum <= W1.RowNum
GROUP BY W1.RowNum, W1.wait_type
HAVING SUM (W2.Percentage) - MAX (W1.Percentage) < 99 -- percentage threshold
OPTION (RECOMPILE);
------

-- Cumulative wait stats are not as useful on an idle instance that is not under load or performance pressure

-- SQL Server Wait Types Library (Paul Randal)
-- https://bit.ly/2ePzYO2

-- The SQL Server Wait Type Repository
-- https://bit.ly/1afzfjC

-- Wait statistics, or please tell me where it hurts
-- https://bit.ly/2wsQHQE

-- SQL Server 2005 Performance Tuning using the Waits and Queues
-- https://bit.ly/1o2NFoF

-- sys.dm_os_wait_stats (Transact-SQL)
-- https://bit.ly/2Hjq9Yl



-- Get a count of SQL connections by IP address (Query 42) (Connection Counts by IP Address)
SELECT ec.client_net_address, es.[program_name], es.[host_name], es.login_name, 
COUNT(ec.session_id) AS [connection count] 
FROM sys.dm_exec_sessions AS es WITH (NOLOCK) 
INNER JOIN sys.dm_exec_connections AS ec WITH (NOLOCK) 
ON es.session_id = ec.session_id 
GROUP BY ec.client_net_address, es.[program_name], es.[host_name], es.login_name  
ORDER BY ec.client_net_address, es.[program_name] OPTION (RECOMPILE);
------

-- This helps you figure where your database load is coming from
-- and verifies connectivity from other machines

-- Solving Connectivity errors to SQL Server
-- https://bit.ly/2EgzoD0



-- Get Average Task Counts (run multiple times)  (Query 43) (Avg Task Counts)
SELECT AVG(current_tasks_count) AS [Avg Task Count], 
AVG(work_queue_count) AS [Avg Work Queue Count],
AVG(runnable_tasks_count) AS [Avg Runnable Task Count],
AVG(pending_disk_io_count) AS [Avg Pending DiskIO Count]
FROM sys.dm_os_schedulers WITH (NOLOCK)
WHERE scheduler_id < 255 OPTION (RECOMPILE);
------

-- Sustained values above 10 suggest further investigation in that area
-- High Avg Task Counts are often caused by blocking/deadlocking or other resource contention

-- Sustained values above 1 suggest further investigation in that area
-- High Avg Runnable Task Counts are a good sign of CPU pressure
-- High Avg Pending DiskIO Counts are a sign of disk pressure

-- How to Do Some Very Basic SQL Server Monitoring
-- https://bit.ly/2q3Btgt



-- Detect blocking (run multiple times)  (Query 44) (Detect Blocking)
SELECT t1.resource_type AS [lock type], DB_NAME(resource_database_id) AS [database],
t1.resource_associated_entity_id AS [blk object],t1.request_mode AS [lock req],  -- lock requested
t1.request_session_id AS [waiter sid], t2.wait_duration_ms AS [wait time],       -- spid of waiter  
(SELECT [text] FROM sys.dm_exec_requests AS r WITH (NOLOCK)                      -- get sql for waiter
CROSS APPLY sys.dm_exec_sql_text(r.[sql_handle]) 
WHERE r.session_id = t1.request_session_id) AS [waiter_batch],
(SELECT SUBSTRING(qt.[text],r.statement_start_offset/2, 
    (CASE WHEN r.statement_end_offset = -1 
    THEN LEN(CONVERT(nvarchar(max), qt.[text])) * 2 
    ELSE r.statement_end_offset END - r.statement_start_offset)/2) 
FROM sys.dm_exec_requests AS r WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(r.[sql_handle]) AS qt
WHERE r.session_id = t1.request_session_id) AS [waiter_stmt],					-- statement blocked
t2.blocking_session_id AS [blocker sid],										-- spid of blocker
(SELECT [text] FROM sys.sysprocesses AS p										-- get sql for blocker
CROSS APPLY sys.dm_exec_sql_text(p.[sql_handle]) 
WHERE p.spid = t2.blocking_session_id) AS [blocker_batch]
FROM sys.dm_tran_locks AS t1 WITH (NOLOCK)
INNER JOIN sys.dm_os_waiting_tasks AS t2 WITH (NOLOCK)
ON t1.lock_owner_address = t2.resource_address OPTION (RECOMPILE);
------

-- Helps troubleshoot blocking and deadlocking issues
-- The results will change from second to second on a busy system
-- You should run this query multiple times when you see signs of blocking



-- Get CPU Utilization History for last 256 minutes (in one minute intervals)  (Query 45) (CPU Utilization History)
DECLARE @ts_now bigint = (SELECT cpu_ticks/(cpu_ticks/ms_ticks) FROM sys.dm_os_sys_info WITH (NOLOCK)); 

SELECT TOP(256) SQLProcessUtilization AS [SQL Server Process CPU Utilization], 
               SystemIdle AS [System Idle Process], 
               100 - SystemIdle - SQLProcessUtilization AS [Other Process CPU Utilization], 
               DATEADD(ms, -1 * (@ts_now - [timestamp]), GETDATE()) AS [Event Time] 
FROM (SELECT record.value('(./Record/@id)[1]', 'int') AS record_id, 
			record.value('(./Record/SchedulerMonitorEvent/SystemHealth/SystemIdle)[1]', 'int') 
			AS [SystemIdle], 
			record.value('(./Record/SchedulerMonitorEvent/SystemHealth/ProcessUtilization)[1]', 'int') 
			AS [SQLProcessUtilization], [timestamp] 
	  FROM (SELECT [timestamp], CONVERT(xml, record) AS [record] 
			FROM sys.dm_os_ring_buffers WITH (NOLOCK)
			WHERE ring_buffer_type = N'RING_BUFFER_SCHEDULER_MONITOR' 
			AND record LIKE N'%<SystemHealth>%') AS x) AS y 
ORDER BY record_id DESC OPTION (RECOMPILE);
------

-- Look at the trend over the entire period 
-- Also look at high sustained 'Other Process' CPU Utilization values
-- Note: This query sometimes gives inaccurate results (negative values)
-- on high core count (> 64 cores) systems


-- Get top total worker time queries for entire instance (Query 46) (Top Worker Time Queries)
SELECT TOP(50) DB_NAME(t.[dbid]) AS [Database Name], 
REPLACE(REPLACE(LEFT(t.[text], 255), CHAR(10),''), CHAR(13),'') AS [Short Query Text],  
qs.total_worker_time AS [Total Worker Time], qs.min_worker_time AS [Min Worker Time],
qs.total_worker_time/qs.execution_count AS [Avg Worker Time], 
qs.max_worker_time AS [Max Worker Time], 
qs.min_elapsed_time AS [Min Elapsed Time], 
qs.total_elapsed_time/qs.execution_count AS [Avg Elapsed Time], 
qs.max_elapsed_time AS [Max Elapsed Time],
qs.min_logical_reads AS [Min Logical Reads],
qs.total_logical_reads/qs.execution_count AS [Avg Logical Reads],
qs.max_logical_reads AS [Max Logical Reads], 
qs.execution_count AS [Execution Count],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index], 
qs.creation_time AS [Creation Time]
--,t.[text] AS [Query Text], qp.query_plan AS [Query Plan] -- uncomment out these columns if not copying results to Excel
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(plan_handle) AS t 
CROSS APPLY sys.dm_exec_query_plan(plan_handle) AS qp 
ORDER BY qs.total_worker_time DESC OPTION (RECOMPILE);
------


-- Helps you find the most expensive queries from a CPU perspective across the entire instance
-- Can also help track down parameter sniffing issues



-- Page Life Expectancy (PLE) value for each NUMA node in current instance  (Query 47) (PLE by NUMA Node)
SELECT @@SERVERNAME AS [Server Name], RTRIM([object_name]) AS [Object Name], instance_name, cntr_value AS [Page Life Expectancy]
FROM sys.dm_os_performance_counters WITH (NOLOCK)
WHERE [object_name] LIKE N'%Buffer Node%' -- Handles named instances
AND counter_name = N'Page life expectancy' OPTION (RECOMPILE);
------

-- PLE is a good measurement of internal memory pressure
-- Higher PLE is better. Watch the trend over time, not the absolute value
-- This will only return one row for non-NUMA systems

-- Page Life Expectancy isn�t what you think�
-- https://bit.ly/2EgynLa


-- Memory Grants Pending value for current instance  (Query 48) (Memory Grants Pending)
SELECT @@SERVERNAME AS [Server Name], RTRIM([object_name]) AS [Object Name], cntr_value AS [Memory Grants Pending]                                                                                                       
FROM sys.dm_os_performance_counters WITH (NOLOCK)
WHERE [object_name] LIKE N'%Memory Manager%' -- Handles named instances
AND counter_name = N'Memory Grants Pending' OPTION (RECOMPILE);
------

-- Run multiple times, and run periodically if you suspect you are under memory pressure
-- Memory Grants Pending above zero for a sustained period is a very strong indicator of internal memory pressure


-- Memory Clerk Usage for instance  (Query 49) (Memory Clerk Usage)
-- Look for high value for CACHESTORE_SQLCP (Ad-hoc query plans)
SELECT TOP(10) mc.[type] AS [Memory Clerk Type], 
       CAST((SUM(mc.pages_kb)/1024.0) AS DECIMAL (15,2)) AS [Memory Usage (MB)] 
FROM sys.dm_os_memory_clerks AS mc WITH (NOLOCK)
GROUP BY mc.[type]  
ORDER BY SUM(mc.pages_kb) DESC OPTION (RECOMPILE);
------

-- MEMORYCLERK_SQLBUFFERPOOL was new for SQL Server 2012. It should be your highest consumer of memory

-- CACHESTORE_SQLCP  SQL Plans         
-- These are cached SQL statements or batches that aren't in stored procedures, functions and triggers
-- Watch out for high values for CACHESTORE_SQLCP
-- Enabling 'optimize for ad hoc workloads' at the instance level can help reduce this
-- Running DBCC FREESYSTEMCACHE ('SQL Plans') periodically may be required to better control this

-- CACHESTORE_OBJCP  Object Plans      
-- These are compiled plans for stored procedures, functions and triggers

-- sys.dm_os_memory_clerks (Transact-SQL)
-- https://bit.ly/2H31xDR



-- Find single-use, ad-hoc and prepared queries that are bloating the plan cache  (Query 50) (Ad hoc Queries)
SELECT TOP(50) DB_NAME(t.[dbid]) AS [Database Name], t.[text] AS [Query Text], 
cp.objtype AS [Object Type], cp.cacheobjtype AS [Cache Object Type],  
cp.size_in_bytes/1024 AS [Plan Size in KB]
FROM sys.dm_exec_cached_plans AS cp WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(plan_handle) AS t
WHERE cp.cacheobjtype = N'Compiled Plan' 
AND cp.objtype IN (N'Adhoc', N'Prepared') 
AND cp.usecounts = 1
ORDER BY cp.size_in_bytes DESC, DB_NAME(t.[dbid]) OPTION (RECOMPILE);
------

-- Gives you the text, type and size of single-use ad-hoc and prepared queries that waste space in the plan cache
-- Enabling 'optimize for ad hoc workloads' for the instance can help (SQL Server 2008 and above only)
-- Running DBCC FREESYSTEMCACHE ('SQL Plans') periodically may be required to better control this
-- Enabling forced parameterization for the database can help, but test first!

-- Plan cache, adhoc workloads and clearing the single-use plan cache bloat
-- https://bit.ly/2EfYOkl


-- Get top total logical reads queries for entire instance (Query 51) (Top Logical Reads Queries)
SELECT TOP(50) DB_NAME(t.[dbid]) AS [Database Name],
REPLACE(REPLACE(LEFT(t.[text], 255), CHAR(10),''), CHAR(13),'') AS [Short Query Text], 
qs.total_logical_reads AS [Total Logical Reads],
qs.min_logical_reads AS [Min Logical Reads],
qs.total_logical_reads/qs.execution_count AS [Avg Logical Reads],
qs.max_logical_reads AS [Max Logical Reads],   
qs.min_worker_time AS [Min Worker Time],
qs.total_worker_time/qs.execution_count AS [Avg Worker Time], 
qs.max_worker_time AS [Max Worker Time], 
qs.min_elapsed_time AS [Min Elapsed Time], 
qs.total_elapsed_time/qs.execution_count AS [Avg Elapsed Time], 
qs.max_elapsed_time AS [Max Elapsed Time],
qs.execution_count AS [Execution Count], 
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index],
qs.creation_time AS [Creation Time]
--,t.[text] AS [Complete Query Text], qp.query_plan AS [Query Plan] -- uncomment out these columns if not copying results to Excel
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(plan_handle) AS t 
CROSS APPLY sys.dm_exec_query_plan(plan_handle) AS qp 
ORDER BY qs.total_logical_reads DESC OPTION (RECOMPILE);
------


-- Helps you find the most expensive queries from a memory perspective across the entire instance
-- Can also help track down parameter sniffing issues


-- Get top average elapsed time queries for entire instance (Query 52) (Top Avg Elapsed Time Queries)
SELECT TOP(50) DB_NAME(t.[dbid]) AS [Database Name], 
REPLACE(REPLACE(LEFT(t.[text], 255), CHAR(10),''), CHAR(13),'') AS [Short Query Text],  
qs.total_elapsed_time/qs.execution_count AS [Avg Elapsed Time],
qs.min_elapsed_time, qs.max_elapsed_time, qs.last_elapsed_time,
qs.execution_count AS [Execution Count],  
qs.total_logical_reads/qs.execution_count AS [Avg Logical Reads], 
qs.total_physical_reads/qs.execution_count AS [Avg Physical Reads], 
qs.total_worker_time/qs.execution_count AS [Avg Worker Time],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index],
qs.creation_time AS [Creation Time]
--,t.[text] AS [Complete Query Text], qp.query_plan AS [Query Plan] -- uncomment out these columns if not copying results to Excel
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(plan_handle) AS t 
CROSS APPLY sys.dm_exec_query_plan(plan_handle) AS qp 
ORDER BY qs.total_elapsed_time/qs.execution_count DESC OPTION (RECOMPILE);
------

-- Helps you find the highest average elapsed time queries across the entire instance
-- Can also help track down parameter sniffing issues


-- Look at UDF execution statistics (Query 53) (UDF Stats by DB)
SELECT TOP (25) DB_NAME(database_id) AS [Database Name], 
		   OBJECT_NAME(object_id, database_id) AS [Function Name],
		   total_worker_time, execution_count, total_elapsed_time,  
           total_elapsed_time/execution_count AS [avg_elapsed_time],  
           last_elapsed_time, last_execution_time, cached_time, [type_desc] 
FROM sys.dm_exec_function_stats WITH (NOLOCK) 
ORDER BY total_worker_time DESC OPTION (RECOMPILE);
------

-- sys.dm_exec_function_stats (Transact-SQL)
-- https://bit.ly/2q1Q6BM



-- Database specific queries *****************************************************************

-- **** Please switch to a user database that you are interested in! *****
--USE YourDatabaseName; -- make sure to change to an actual database on your instance, not the master system database
--GO

-- Individual File Sizes and space available for current database  (Query 54) (File Sizes and Space)
SELECT f.name AS [File Name] , f.physical_name AS [Physical Name], 
CAST((f.size/128.0) AS DECIMAL(15,2)) AS [Total Size in MB],
CAST(f.size/128.0 - CAST(FILEPROPERTY(f.name, 'SpaceUsed') AS int)/128.0 AS DECIMAL(15,2)) 
AS [Available Space In MB], f.[file_id], fg.name AS [Filegroup Name],
f.is_percent_growth, f.growth, fg.is_default, fg.is_read_only, 
fg.is_autogrow_all_files
FROM sys.database_files AS f WITH (NOLOCK) 
LEFT OUTER JOIN sys.filegroups AS fg WITH (NOLOCK)
ON f.data_space_id = fg.data_space_id
ORDER BY f.[file_id] OPTION (RECOMPILE);
------

-- Look at how large and how full the files are and where they are located
-- Make sure the transaction log is not full!!

-- is_autogrow_all_files was new for SQL Server 2016. Equivalent to TF 1117 for user databases

-- SQL Server 2016: Changes in default behavior for autogrow and allocations for tempdb and user databases
-- https://bit.ly/2evRZSR


-- Log space usage for current database  (Query 55) (Log Space Usage)
SELECT DB_NAME(lsu.database_id) AS [Database Name], db.recovery_model_desc AS [Recovery Model],
		CAST(lsu.total_log_size_in_bytes/1048576.0 AS DECIMAL(10, 2)) AS [Total Log Space (MB)],
		CAST(lsu.used_log_space_in_bytes/1048576.0 AS DECIMAL(10, 2)) AS [Used Log Space (MB)], 
		CAST(lsu.used_log_space_in_percent AS DECIMAL(10, 2)) AS [Used Log Space %],
		CAST(lsu.log_space_in_bytes_since_last_backup/1048576.0 AS DECIMAL(10, 2)) AS [Used Log Space Since Last Backup (MB)],
		db.log_reuse_wait_desc		 
FROM sys.dm_db_log_space_usage AS lsu WITH (NOLOCK)
INNER JOIN sys.databases AS db WITH (NOLOCK)
ON lsu.database_id = db.database_id
OPTION (RECOMPILE);
------

-- Look at log file size and usage, along with the log reuse wait description for the current database

-- sys.dm_db_log_space_usage (Transact-SQL)
-- https://bit.ly/2H4MQw9


-- Status of last VLF for current database  (Query 56) (Last VLF Status)
SELECT TOP(1) DB_NAME(li.database_id) AS [Database Name], li.[file_id],
              li.vlf_size_mb, li.vlf_sequence_number, li.vlf_active, li.vlf_status
FROM sys.dm_db_log_info(DB_ID()) AS li 
ORDER BY vlf_sequence_number DESC OPTION (RECOMPILE);
------

-- Determine whether you will be able to shrink the transaction log file

-- vlf_status Values
-- 0 is inactive 
-- 1 is initialized but unused 
-- 2 is active

-- sys.dm_db_log_info (Transact-SQL)
-- https://bit.ly/2EQUU1v



-- Get database scoped configuration values for current database (Query 57) (Database-scoped Configurations)
SELECT configuration_id, name, [value] AS [value_for_primary], value_for_secondary
FROM sys.database_scoped_configurations WITH (NOLOCK) OPTION (RECOMPILE);
------

-- This lets you see the value of these new properties for the current database

-- Clear plan cache for current database
-- ALTER DATABASE SCOPED CONFIGURATION CLEAR PROCEDURE_CACHE;

-- ALTER DATABASE SCOPED CONFIGURATION (Transact-SQL)
-- https://bit.ly/2sOH7nb


-- I/O Statistics by file for the current database  (Query 58) (IO Stats By File)
SELECT DB_NAME(DB_ID()) AS [Database Name], df.name AS [Logical Name], vfs.[file_id], df.type_desc,
df.physical_name AS [Physical Name], CAST(vfs.size_on_disk_bytes/1048576.0 AS DECIMAL(10, 2)) AS [Size on Disk (MB)],
vfs.num_of_reads, vfs.num_of_writes, vfs.io_stall_read_ms, vfs.io_stall_write_ms,
CAST(100. * vfs.io_stall_read_ms/(vfs.io_stall_read_ms + vfs.io_stall_write_ms) AS DECIMAL(10,1)) AS [IO Stall Reads Pct],
CAST(100. * vfs.io_stall_write_ms/(vfs.io_stall_write_ms + vfs.io_stall_read_ms) AS DECIMAL(10,1)) AS [IO Stall Writes Pct],
(vfs.num_of_reads + vfs.num_of_writes) AS [Writes + Reads], 
CAST(vfs.num_of_bytes_read/1048576.0 AS DECIMAL(10, 2)) AS [MB Read], 
CAST(vfs.num_of_bytes_written/1048576.0 AS DECIMAL(10, 2)) AS [MB Written],
CAST(100. * vfs.num_of_reads/(vfs.num_of_reads + vfs.num_of_writes) AS DECIMAL(10,1)) AS [# Reads Pct],
CAST(100. * vfs.num_of_writes/(vfs.num_of_reads + vfs.num_of_writes) AS DECIMAL(10,1)) AS [# Write Pct],
CAST(100. * vfs.num_of_bytes_read/(vfs.num_of_bytes_read + vfs.num_of_bytes_written) AS DECIMAL(10,1)) AS [Read Bytes Pct],
CAST(100. * vfs.num_of_bytes_written/(vfs.num_of_bytes_read + vfs.num_of_bytes_written) AS DECIMAL(10,1)) AS [Written Bytes Pct]
FROM sys.dm_io_virtual_file_stats(DB_ID(), NULL) AS vfs
INNER JOIN sys.database_files AS df WITH (NOLOCK)
ON vfs.[file_id]= df.[file_id] OPTION (RECOMPILE);
------

-- This helps you characterize your workload better from an I/O perspective for this database
-- It helps you determine whether you has an OLTP or DW/DSS type of workload



-- Get most frequently executed queries for this database (Query 59) (Query Execution Counts)
SELECT TOP(50) LEFT(t.[text], 50) AS [Short Query Text], qs.execution_count AS [Execution Count],
qs.total_logical_reads AS [Total Logical Reads],
qs.total_logical_reads/qs.execution_count AS [Avg Logical Reads],
qs.total_worker_time AS [Total Worker Time],
qs.total_worker_time/qs.execution_count AS [Avg Worker Time], 
qs.total_elapsed_time AS [Total Elapsed Time],
qs.total_elapsed_time/qs.execution_count AS [Avg Elapsed Time],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index], 
qs.creation_time AS [Creation Time]
--,t.[text] AS [Complete Query Text], qp.query_plan AS [Query Plan] -- uncomment out these columns if not copying results to Excel
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(plan_handle) AS t 
CROSS APPLY sys.dm_exec_query_plan(plan_handle) AS qp 
WHERE t.dbid = DB_ID()
ORDER BY qs.execution_count DESC OPTION (RECOMPILE);
------


-- Queries 60 through 65 are the "Bad Man List" for stored procedures

-- Top Cached SPs By Execution Count (Query 60) (SP Execution Counts)
SELECT TOP(100) p.name AS [SP Name], qs.execution_count AS [Execution Count],
ISNULL(qs.execution_count/DATEDIFF(Minute, qs.cached_time, GETDATE()), 0) AS [Calls/Minute],
qs.total_elapsed_time/qs.execution_count AS [Avg Elapsed Time],
qs.total_worker_time/qs.execution_count AS [Avg Worker Time],    
qs.total_logical_reads/qs.execution_count AS [Avg Logical Reads],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index],
FORMAT(qs.last_execution_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Last Execution Time], 
FORMAT(qs.cached_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Plan Cached Time]
-- ,qp.query_plan AS [Query Plan] -- Uncomment if you want the Query Plan
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
CROSS APPLY sys.dm_exec_query_plan(qs.plan_handle) AS qp
WHERE qs.database_id = DB_ID()
AND DATEDIFF(Minute, qs.cached_time, GETDATE()) > 0
ORDER BY qs.execution_count DESC OPTION (RECOMPILE);
------

-- Tells you which cached stored procedures are called the most often
-- This helps you characterize and baseline your workload


-- Top Cached SPs By Avg Elapsed Time (Query 61) (SP Avg Elapsed Time)
SELECT TOP(25) p.name AS [SP Name], qs.min_elapsed_time, qs.total_elapsed_time/qs.execution_count AS [avg_elapsed_time], 
qs.max_elapsed_time, qs.last_elapsed_time, qs.total_elapsed_time, qs.execution_count, 
ISNULL(qs.execution_count/DATEDIFF(Minute, qs.cached_time, GETDATE()), 0) AS [Calls/Minute], 
qs.total_worker_time/qs.execution_count AS [AvgWorkerTime], 
qs.total_worker_time AS [TotalWorkerTime],
FORMAT(qs.last_execution_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Last Execution Time], 
FORMAT(qs.cached_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Plan Cached Time]
-- ,qp.query_plan AS [Query Plan] -- Uncomment if you want the Query Plan
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
CROSS APPLY sys.dm_exec_query_plan(qs.plan_handle) AS qp
WHERE qs.database_id = DB_ID()
AND DATEDIFF(Minute, qs.cached_time, GETDATE()) > 0
ORDER BY avg_elapsed_time DESC OPTION (RECOMPILE);
------

-- This helps you find high average elapsed time cached stored procedures that
-- may be easy to optimize with standard query tuning techniques



-- Top Cached SPs By Total Worker time. Worker time relates to CPU cost  (Query 62) (SP Worker Time)
SELECT TOP(25) p.name AS [SP Name], qs.total_worker_time AS [TotalWorkerTime], 
qs.total_worker_time/qs.execution_count AS [AvgWorkerTime], qs.execution_count, 
ISNULL(qs.execution_count/DATEDIFF(Minute, qs.cached_time, GETDATE()), 0) AS [Calls/Minute],
qs.total_elapsed_time, qs.total_elapsed_time/qs.execution_count AS [avg_elapsed_time],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index],
FORMAT(qs.last_execution_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Last Execution Time], 
FORMAT(qs.cached_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Plan Cached Time]
-- ,qp.query_plan AS [Query Plan] -- Uncomment if you want the Query Plan
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
CROSS APPLY sys.dm_exec_query_plan(qs.plan_handle) AS qp
WHERE qs.database_id = DB_ID()
AND DATEDIFF(Minute, qs.cached_time, GETDATE()) > 0
ORDER BY qs.total_worker_time DESC OPTION (RECOMPILE);
------

-- This helps you find the most expensive cached stored procedures from a CPU perspective
-- You should look at this if you see signs of CPU pressure


-- Top Cached SPs By Total Logical Reads. Logical reads relate to memory pressure  (Query 63) (SP Logical Reads)
SELECT TOP(25) p.name AS [SP Name], qs.total_logical_reads AS [TotalLogicalReads], 
qs.total_logical_reads/qs.execution_count AS [AvgLogicalReads],qs.execution_count, 
ISNULL(qs.execution_count/DATEDIFF(Minute, qs.cached_time, GETDATE()), 0) AS [Calls/Minute], 
qs.total_elapsed_time, qs.total_elapsed_time/qs.execution_count AS [avg_elapsed_time],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index], 
FORMAT(qs.last_execution_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Last Execution Time], 
FORMAT(qs.cached_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Plan Cached Time]
-- ,qp.query_plan AS [Query Plan] -- Uncomment if you want the Query Plan
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
CROSS APPLY sys.dm_exec_query_plan(qs.plan_handle) AS qp
WHERE qs.database_id = DB_ID()
AND DATEDIFF(Minute, qs.cached_time, GETDATE()) > 0
ORDER BY qs.total_logical_reads DESC OPTION (RECOMPILE);
------

-- This helps you find the most expensive cached stored procedures from a memory perspective
-- You should look at this if you see signs of memory pressure


-- Top Cached SPs By Total Physical Reads. Physical reads relate to disk read I/O pressure  (Query 64) (SP Physical Reads)
SELECT TOP(25) p.name AS [SP Name],qs.total_physical_reads AS [TotalPhysicalReads], 
qs.total_physical_reads/qs.execution_count AS [AvgPhysicalReads], qs.execution_count, 
qs.total_logical_reads,qs.total_elapsed_time, qs.total_elapsed_time/qs.execution_count AS [avg_elapsed_time],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index],
FORMAT(qs.last_execution_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Last Execution Time], 
FORMAT(qs.cached_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Plan Cached Time]
-- ,qp.query_plan AS [Query Plan] -- Uncomment if you want the Query Plan 
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
CROSS APPLY sys.dm_exec_query_plan(qs.plan_handle) AS qp
WHERE qs.database_id = DB_ID()
AND qs.total_physical_reads > 0
ORDER BY qs.total_physical_reads DESC, qs.total_logical_reads DESC OPTION (RECOMPILE);
------

-- This helps you find the most expensive cached stored procedures from a read I/O perspective
-- You should look at this if you see signs of I/O pressure or of memory pressure
       


-- Top Cached SPs By Total Logical Writes (Query 65) (SP Logical Writes)
-- Logical writes relate to both memory and disk I/O pressure 
SELECT TOP(25) p.name AS [SP Name], qs.total_logical_writes AS [TotalLogicalWrites], 
qs.total_logical_writes/qs.execution_count AS [AvgLogicalWrites], qs.execution_count,
ISNULL(qs.execution_count/DATEDIFF(Minute, qs.cached_time, GETDATE()), 0) AS [Calls/Minute],
qs.total_elapsed_time, qs.total_elapsed_time/qs.execution_count AS [avg_elapsed_time],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index], 
FORMAT(qs.last_execution_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Last Execution Time], 
FORMAT(qs.cached_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Plan Cached Time]
-- ,qp.query_plan AS [Query Plan] -- Uncomment if you want the Query Plan 
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
CROSS APPLY sys.dm_exec_query_plan(qs.plan_handle) AS qp
WHERE qs.database_id = DB_ID()
AND qs.total_logical_writes > 0
AND DATEDIFF(Minute, qs.cached_time, GETDATE()) > 0
ORDER BY qs.total_logical_writes DESC OPTION (RECOMPILE);
------

-- This helps you find the most expensive cached stored procedures from a write I/O perspective
-- You should look at this if you see signs of I/O pressure or of memory pressure


-- Lists the top statements by average input/output usage for the current database  (Query 66) (Top IO Statements)
SELECT TOP(50) OBJECT_NAME(qt.objectid, dbid) AS [SP Name],
(qs.total_logical_reads + qs.total_logical_writes) /qs.execution_count AS [Avg IO], qs.execution_count AS [Execution Count],
SUBSTRING(qt.[text],qs.statement_start_offset/2, 
	(CASE 
		WHEN qs.statement_end_offset = -1 
	 THEN LEN(CONVERT(nvarchar(max), qt.[text])) * 2 
		ELSE qs.statement_end_offset 
	 END - qs.statement_start_offset)/2) AS [Query Text]	
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(qs.sql_handle) AS qt
WHERE qt.[dbid] = DB_ID()
ORDER BY [Avg IO] DESC OPTION (RECOMPILE);
------

-- Helps you find the most expensive statements for I/O by SP



-- Possible Bad NC Indexes (writes > reads)  (Query 67) (Bad NC Indexes)
SELECT OBJECT_NAME(s.[object_id]) AS [Table Name], i.name AS [Index Name], i.index_id, 
i.is_disabled, i.is_hypothetical, i.has_filter, i.fill_factor,
s.user_updates AS [Total Writes], s.user_seeks + s.user_scans + s.user_lookups AS [Total Reads],
s.user_updates - (s.user_seeks + s.user_scans + s.user_lookups) AS [Difference]
FROM sys.dm_db_index_usage_stats AS s WITH (NOLOCK)
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON s.[object_id] = i.[object_id]
AND i.index_id = s.index_id
WHERE OBJECTPROPERTY(s.[object_id],'IsUserTable') = 1
AND s.database_id = DB_ID()
AND s.user_updates > (s.user_seeks + s.user_scans + s.user_lookups)
AND i.index_id > 1 AND i.[type_desc] = N'NONCLUSTERED'
AND i.is_primary_key = 0 AND i.is_unique_constraint = 0 AND i.is_unique = 0
ORDER BY [Difference] DESC, [Total Writes] DESC, [Total Reads] ASC OPTION (RECOMPILE);
------

-- Look for indexes with high numbers of writes and zero or very low numbers of reads
-- Consider your complete workload, and how long your instance has been running
-- Investigate further before dropping an index!


-- Missing Indexes for current database by Index Advantage  (Query 68) (Missing Indexes)
SELECT CONVERT(decimal(18,2), user_seeks * avg_total_user_cost * (avg_user_impact * 0.01)) AS [index_advantage], 
migs.last_user_seek, mid.[statement] AS [Database.Schema.Table],
COUNT(1) OVER(PARTITION BY mid.[statement]) AS [missing_indexes_for_table],
COUNT(1) OVER(PARTITION BY mid.[statement], equality_columns) AS [similar_missing_indexes_for_table],
mid.equality_columns, mid.inequality_columns, mid.included_columns,
migs.unique_compiles, migs.user_seeks, 
CONVERT(decimal(18,2), migs.avg_total_user_cost) AS [avg_total_user_cost], migs.avg_user_impact,
OBJECT_NAME(mid.[object_id]) AS [Table Name], p.rows AS [Table Rows]
FROM sys.dm_db_missing_index_group_stats AS migs WITH (NOLOCK)
INNER JOIN sys.dm_db_missing_index_groups AS mig WITH (NOLOCK)
ON migs.group_handle = mig.index_group_handle
INNER JOIN sys.dm_db_missing_index_details AS mid WITH (NOLOCK)
ON mig.index_handle = mid.index_handle
INNER JOIN sys.partitions AS p WITH (NOLOCK)
ON p.[object_id] = mid.[object_id]
WHERE mid.database_id = DB_ID()
AND p.index_id < 2 
ORDER BY index_advantage DESC OPTION (RECOMPILE);
------

-- Look at index advantage, last user seek time, number of user seeks to help determine source and importance
-- SQL Server is overly eager to add included columns, so beware
-- Do not just blindly add indexes that show up from this query!!!


-- Find missing index warnings for cached plans in the current database  (Query 69) (Missing Index Warnings)
-- Note: This query could take some time on a busy instance
SELECT TOP(25) OBJECT_NAME(objectid) AS [ObjectName], 
               cp.objtype, cp.usecounts, cp.size_in_bytes, query_plan
FROM sys.dm_exec_cached_plans AS cp WITH (NOLOCK)
CROSS APPLY sys.dm_exec_query_plan(cp.plan_handle) AS qp
WHERE CAST(query_plan AS NVARCHAR(MAX)) LIKE N'%MissingIndex%'
AND dbid = DB_ID()
ORDER BY cp.usecounts DESC OPTION (RECOMPILE);
------

-- Helps you connect missing indexes to specific stored procedures or queries
-- This can help you decide whether to add them or not


-- Breaks down buffers used by current database by object (table, index) in the buffer cache  (Query 70) (Buffer Usage)
-- Note: This query could take some time on a busy instance
SELECT OBJECT_NAME(p.[object_id]) AS [Object Name], p.index_id, 
CAST(COUNT(*)/128.0 AS DECIMAL(10, 2)) AS [Buffer size(MB)],  
COUNT(*) AS [BufferCount], p.[Rows] AS [Row Count],
p.data_compression_desc AS [Compression Type]
FROM sys.allocation_units AS a WITH (NOLOCK)
INNER JOIN sys.dm_os_buffer_descriptors AS b WITH (NOLOCK)
ON a.allocation_unit_id = b.allocation_unit_id
INNER JOIN sys.partitions AS p WITH (NOLOCK)
ON a.container_id = p.hobt_id
WHERE b.database_id = CONVERT(int, DB_ID())
AND p.[object_id] > 100
AND OBJECT_NAME(p.[object_id]) NOT LIKE N'plan_%'
AND OBJECT_NAME(p.[object_id]) NOT LIKE N'sys%'
AND OBJECT_NAME(p.[object_id]) NOT LIKE N'xml_index_nodes%'
GROUP BY p.[object_id], p.index_id, p.data_compression_desc, p.[Rows]
ORDER BY [BufferCount] DESC OPTION (RECOMPILE);
------

-- Tells you what tables and indexes are using the most memory in the buffer cache
-- It can help identify possible candidates for data compression


-- Get Table names, row counts, and compression status for clustered index or heap  (Query 71) (Table Sizes)
SELECT OBJECT_NAME(object_id) AS [ObjectName], 
SUM(Rows) AS [RowCount], data_compression_desc AS [CompressionType]
FROM sys.partitions WITH (NOLOCK)
WHERE index_id < 2 --ignore the partitions from the non-clustered index if any
AND OBJECT_NAME(object_id) NOT LIKE N'sys%'
AND OBJECT_NAME(object_id) NOT LIKE N'queue_%' 
AND OBJECT_NAME(object_id) NOT LIKE N'filestream_tombstone%' 
AND OBJECT_NAME(object_id) NOT LIKE N'fulltext%'
AND OBJECT_NAME(object_id) NOT LIKE N'ifts_comp_fragment%'
AND OBJECT_NAME(object_id) NOT LIKE N'filetable_updates%'
AND OBJECT_NAME(object_id) NOT LIKE N'xml_index_nodes%'
AND OBJECT_NAME(object_id) NOT LIKE N'sqlagent_job%'  
AND OBJECT_NAME(object_id) NOT LIKE N'plan_persist%'  
GROUP BY object_id, data_compression_desc
ORDER BY SUM(Rows) DESC OPTION (RECOMPILE);
------

-- Gives you an idea of table sizes, and possible data compression opportunities



-- Get some key table properties (Query 72) (Table Properties)
SELECT OBJECT_NAME(t.[object_id]) AS [ObjectName], p.[rows] AS [Table Rows], p.index_id, 
       p.data_compression_desc AS [Index Data Compression],
       t.create_date, t.lock_on_bulk_load, t.is_replicated, t.has_replication_filter, 
       t.is_tracked_by_cdc, t.lock_escalation_desc, t.is_filetable, 
	   t.is_memory_optimized, t.durability_desc, 
	   t.temporal_type_desc, t.is_remote_data_archive_enabled, t.is_external -- new for SQL Server 2016
FROM sys.tables AS t WITH (NOLOCK)
INNER JOIN sys.partitions AS p WITH (NOLOCK)
ON t.[object_id] = p.[object_id]
WHERE OBJECT_NAME(t.[object_id]) NOT LIKE N'sys%'
ORDER BY OBJECT_NAME(t.[object_id]), p.index_id OPTION (RECOMPILE);
------

-- Gives you some good information about your tables
-- is_memory_optimized and durability_desc were new in SQL Server 2014
-- temporal_type_desc, is_remote_data_archive_enabled, is_external were new in SQL Server 2016

-- sys.tables (Transact-SQL)
-- https://bit.ly/2Gk7998



-- When were Statistics last updated on all indexes?  (Query 73) (Statistics Update)
SELECT SCHEMA_NAME(o.Schema_ID) + N'.' + o.[NAME] AS [Object Name], o.[type_desc] AS [Object Type],
      i.[name] AS [Index Name], STATS_DATE(i.[object_id], i.index_id) AS [Statistics Date], 
      s.auto_created, s.no_recompute, s.user_created, s.is_incremental, s.is_temporary,
	  st.row_count, st.used_page_count
FROM sys.objects AS o WITH (NOLOCK)
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON o.[object_id] = i.[object_id]
INNER JOIN sys.stats AS s WITH (NOLOCK)
ON i.[object_id] = s.[object_id] 
AND i.index_id = s.stats_id
INNER JOIN sys.dm_db_partition_stats AS st WITH (NOLOCK)
ON o.[object_id] = st.[object_id]
AND i.[index_id] = st.[index_id]
WHERE o.[type] IN ('U', 'V')
AND st.row_count > 0
ORDER BY STATS_DATE(i.[object_id], i.index_id) DESC OPTION (RECOMPILE);
------  

-- Helps discover possible problems with out-of-date statistics
-- Also gives you an idea which indexes are the most active

-- sys.stats (Transact-SQL)
-- https://bit.ly/2GyAxrn

-- UPDATEs to Statistics (Erin Stellato)
-- https://bit.ly/2vhrYQy




-- Look at most frequently modified indexes and statistics (Query 74) (Volatile Indexes)
SELECT o.[name] AS [Object Name], o.[object_id], o.[type_desc], s.[name] AS [Statistics Name], 
       s.stats_id, s.no_recompute, s.auto_created, s.is_incremental, s.is_temporary,
	   sp.modification_counter, sp.[rows], sp.rows_sampled, sp.last_updated
FROM sys.objects AS o WITH (NOLOCK)
INNER JOIN sys.stats AS s WITH (NOLOCK)
ON s.object_id = o.object_id
CROSS APPLY sys.dm_db_stats_properties(s.object_id, s.stats_id) AS sp
WHERE o.[type_desc] NOT IN (N'SYSTEM_TABLE', N'INTERNAL_TABLE')
AND sp.modification_counter > 0
ORDER BY sp.modification_counter DESC, o.name OPTION (RECOMPILE);
------

-- This helps you understand your workload and make better decisions about 
-- things like data compression and adding new indexes to a table



-- Get fragmentation info for all indexes above a certain size in the current database  (Query 75) (Index Fragmentation)
-- Note: This query could take some time on a very large database
SELECT DB_NAME(ps.database_id) AS [Database Name], SCHEMA_NAME(o.[schema_id]) AS [Schema Name],
OBJECT_NAME(ps.OBJECT_ID) AS [Object Name], i.[name] AS [Index Name], ps.index_id, 
ps.index_type_desc, ps.avg_fragmentation_in_percent, 
ps.fragment_count, ps.page_count, i.fill_factor, i.has_filter, 
i.filter_definition, i.[allow_page_locks]
FROM sys.dm_db_index_physical_stats(DB_ID(),NULL, NULL, NULL , N'LIMITED') AS ps
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON ps.[object_id] = i.[object_id] 
AND ps.index_id = i.index_id
INNER JOIN sys.objects AS o WITH (NOLOCK)
ON i.[object_id] = o.[object_id]
WHERE ps.database_id = DB_ID()
AND ps.page_count > 2500
ORDER BY ps.avg_fragmentation_in_percent DESC OPTION (RECOMPILE);
------

-- Helps determine whether you have framentation in your relational indexes
-- and how effective your index maintenance strategy is


--- Index Read/Write stats (all tables in current DB) ordered by Reads  (Query 76) (Overall Index Usage - Reads)
SELECT OBJECT_NAME(i.[object_id]) AS [ObjectName], i.[name] AS [IndexName], i.index_id, 
       s.user_seeks, s.user_scans, s.user_lookups,
	   s.user_seeks + s.user_scans + s.user_lookups AS [Total Reads], 
	   s.user_updates AS [Writes],  
	   i.[type_desc] AS [Index Type], i.fill_factor AS [Fill Factor], i.has_filter, i.filter_definition, 
	   s.last_user_scan, s.last_user_lookup, s.last_user_seek
FROM sys.indexes AS i WITH (NOLOCK)
LEFT OUTER JOIN sys.dm_db_index_usage_stats AS s WITH (NOLOCK)
ON i.[object_id] = s.[object_id]
AND i.index_id = s.index_id
AND s.database_id = DB_ID()
WHERE OBJECTPROPERTY(i.[object_id],'IsUserTable') = 1
ORDER BY s.user_seeks + s.user_scans + s.user_lookups DESC OPTION (RECOMPILE); -- Order by reads
------

-- Show which indexes in the current database are most active for Reads


--- Index Read/Write stats (all tables in current DB) ordered by Writes  (Query 77) (Overall Index Usage - Writes)
SELECT OBJECT_NAME(i.[object_id]) AS [ObjectName], i.[name] AS [IndexName], i.index_id,
	   s.user_updates AS [Writes], s.user_seeks + s.user_scans + s.user_lookups AS [Total Reads], 
	   i.[type_desc] AS [Index Type], i.fill_factor AS [Fill Factor], i.has_filter, i.filter_definition,
	   s.last_system_update, s.last_user_update
FROM sys.indexes AS i WITH (NOLOCK)
LEFT OUTER JOIN sys.dm_db_index_usage_stats AS s WITH (NOLOCK)
ON i.[object_id] = s.[object_id]
AND i.index_id = s.index_id
AND s.database_id = DB_ID()
WHERE OBJECTPROPERTY(i.[object_id],'IsUserTable') = 1
ORDER BY s.user_updates DESC OPTION (RECOMPILE);						 -- Order by writes
------

-- Show which indexes in the current database are most active for Writes


-- Get in-memory OLTP index usage (Query 78) (XTP Index Usage)
SELECT OBJECT_NAME(i.[object_id]) AS [Object Name], i.index_id, i.[name] AS [Index Name],
       i.[type_desc], xis.scans_started, xis.scans_retries, 
	   xis.rows_touched, xis.rows_returned
FROM sys.dm_db_xtp_index_stats AS xis WITH (NOLOCK)
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON i.[object_id] = xis.[object_id] 
AND i.index_id = xis.index_id 
ORDER BY OBJECT_NAME(i.[object_id]) OPTION (RECOMPILE);
------

-- This gives you some index usage statistics for in-memory OLTP
-- Returns no data if you are not using in-memory OLTP

-- Guidelines for Using Indexes on Memory-Optimized Tables
-- https://bit.ly/2GCP8lF



-- Look at Columnstore index physical statistics (Query 79) (Columnstore Index Physical Stat)
SELECT OBJECT_NAME(ps.object_id) AS [TableName],  
	i.[name] AS [IndexName], ps.index_id, ps.partition_number,
	ps.delta_store_hobt_id, ps.state_desc, ps.total_rows, ps.size_in_bytes,
	ps.trim_reason_desc, ps.generation, ps.transition_to_compressed_state_desc,
	ps.has_vertipaq_optimization, ps.deleted_rows,
	100 * (ISNULL(ps.deleted_rows, 0))/ps.total_rows AS [Fragmentation]
FROM sys.dm_db_column_store_row_group_physical_stats AS ps WITH (NOLOCK)
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON ps.object_id = i.object_id 
AND ps.index_id = i.index_id
ORDER BY ps.object_id, ps.partition_number, ps.row_group_id OPTION (RECOMPILE);
------

-- sys.dm_db_column_store_row_group_physical_stats (Transact-SQL)
-- https://bit.ly/2q276XQ



-- Get lock waits for current database (Query 80) (Lock Waits)
SELECT o.name AS [table_name], i.name AS [index_name], ios.index_id, ios.partition_number,
		SUM(ios.row_lock_wait_count) AS [total_row_lock_waits], 
		SUM(ios.row_lock_wait_in_ms) AS [total_row_lock_wait_in_ms],
		SUM(ios.page_lock_wait_count) AS [total_page_lock_waits],
		SUM(ios.page_lock_wait_in_ms) AS [total_page_lock_wait_in_ms],
		SUM(ios.page_lock_wait_in_ms)+ SUM(row_lock_wait_in_ms) AS [total_lock_wait_in_ms]
FROM sys.dm_db_index_operational_stats(DB_ID(), NULL, NULL, NULL) AS ios
INNER JOIN sys.objects AS o WITH (NOLOCK)
ON ios.[object_id] = o.[object_id]
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON ios.[object_id] = i.[object_id] 
AND ios.index_id = i.index_id
WHERE o.[object_id] > 100
GROUP BY o.name, i.name, ios.index_id, ios.partition_number
HAVING SUM(ios.page_lock_wait_in_ms)+ SUM(row_lock_wait_in_ms) > 0
ORDER BY total_lock_wait_in_ms DESC OPTION (RECOMPILE);
------

-- This query is helpful for troubleshooting blocking and deadlocking issues



-- Look at UDF execution statistics (Query 81) (UDF Statistics)
SELECT OBJECT_NAME(object_id) AS [Function Name], execution_count,
	   total_worker_time, total_logical_reads, total_physical_reads, total_elapsed_time, 
	   total_elapsed_time/execution_count AS [avg_elapsed_time],
	   FORMAT(cached_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Plan Cached Time]
FROM sys.dm_exec_function_stats WITH (NOLOCK) 
WHERE database_id = DB_ID()
ORDER BY total_worker_time DESC OPTION (RECOMPILE); 
------

-- New for SQL Server 2016
-- Helps you investigate scalar UDF performance issues
-- Does not return information for table valued functions

-- sys.dm_exec_function_stats (Transact-SQL)
-- https://bit.ly/2q1Q6BM


-- Get QueryStore Options for this database (Query 82) (QueryStore Options)
SELECT actual_state_desc, desired_state_desc, [interval_length_minutes],
       current_storage_size_mb, [max_storage_size_mb], 
	   query_capture_mode_desc, size_based_cleanup_mode_desc
FROM sys.database_query_store_options WITH (NOLOCK) OPTION (RECOMPILE);
------

-- New for SQL Server 2016
-- Requires that Query Store is enabled for this database

-- Tuning Workload Performance with Query Store
-- https://bit.ly/1kHSl7w


-- Get highest aggregate duration queries over last hour (Query 83) (High Aggregate Duration Queries)
WITH AggregatedDurationLastHour
AS
(SELECT q.query_id, SUM(count_executions * avg_duration) AS total_duration,
   COUNT (distinct p.plan_id) AS number_of_plans
   FROM sys.query_store_query_text AS qt WITH (NOLOCK)
   INNER JOIN sys.query_store_query AS q WITH (NOLOCK)
   ON qt.query_text_id = q.query_text_id
   INNER JOIN sys.query_store_plan AS p WITH (NOLOCK)
   ON q.query_id = p.query_id
   INNER JOIN sys.query_store_runtime_stats AS rs WITH (NOLOCK)
   ON rs.plan_id = p.plan_id
   INNER JOIN sys.query_store_runtime_stats_interval AS rsi WITH (NOLOCK)
   ON rsi.runtime_stats_interval_id = rs.runtime_stats_interval_id
   WHERE rsi.start_time >= DATEADD(hour, -1, GETUTCDATE()) 
   AND rs.execution_type_desc = N'Regular'
   GROUP BY q.query_id),
OrderedDuration AS
(SELECT query_id, total_duration, number_of_plans, 
 ROW_NUMBER () OVER (ORDER BY total_duration DESC, query_id) AS RN
 FROM AggregatedDurationLastHour)
SELECT OBJECT_NAME(q.object_id) AS [Containing Object], qt.query_sql_text, 
od.total_duration AS [Total Duration (microsecs)], 
od.number_of_plans AS [Plan Count],
p.is_forced_plan, p.is_parallel_plan, p.is_trivial_plan,
q.query_parameterization_type_desc, p.[compatibility_level],
p.last_compile_start_time, q.last_execution_time,
CONVERT(xml, p.query_plan) AS query_plan_xml 
FROM OrderedDuration AS od 
INNER JOIN sys.query_store_query AS q WITH (NOLOCK)
ON q.query_id  = od.query_id
INNER JOIN sys.query_store_query_text AS qt WITH (NOLOCK)
ON q.query_text_id = qt.query_text_id
INNER JOIN sys.query_store_plan AS p WITH (NOLOCK)
ON q.query_id = p.query_id
WHERE od.RN <= 50 
ORDER BY total_duration DESC OPTION (RECOMPILE);
------

-- New for SQL Server 2016
-- Requires that QueryStore is enabled for this database



-- Get highest aggregate CPU time queries over last hour (Query 84) (High Aggregate CPU Queries)
WITH AggregatedCPULastHour
AS
(SELECT q.query_id, SUM(rs.count_executions * rs.avg_cpu_time) AS total_cpu_time,
   COUNT (DISTINCT p.plan_id) AS number_of_plans
   FROM sys.query_store_query_text AS qt WITH (NOLOCK)
   INNER JOIN sys.query_store_query AS q WITH (NOLOCK)
   ON qt.query_text_id = q.query_text_id
   INNER JOIN sys.query_store_plan AS p WITH (NOLOCK)
   ON q.query_id = p.query_id
   INNER JOIN sys.query_store_runtime_stats AS rs WITH (NOLOCK)
   ON rs.plan_id = p.plan_id
   INNER JOIN sys.query_store_runtime_stats_interval AS rsi WITH (NOLOCK)
   ON rsi.runtime_stats_interval_id = rs.runtime_stats_interval_id
   WHERE rsi.start_time >= DATEADD(hour, -1, GETUTCDATE()) 
   AND rs.execution_type_desc = N'Regular'
   GROUP BY q.query_id), OrderedDuration 
AS
(SELECT query_id, total_cpu_time, number_of_plans, 
 ROW_NUMBER () OVER (ORDER BY total_cpu_time DESC, query_id) AS RN
 FROM AggregatedCPULastHour)
SELECT OBJECT_NAME(q.object_id) AS [Containing Object], qt.query_sql_text, 
od.total_cpu_time AS [Total CPU Time (microsecs)], 
od.number_of_plans AS [Plan Count],
p.is_forced_plan, p.is_parallel_plan, p.is_trivial_plan,
q.query_parameterization_type_desc, p.[compatibility_level],
p.last_compile_start_time, 
q.last_execution_time,
CONVERT(xml, p.query_plan) AS query_plan_xml 
FROM OrderedDuration AS od 
INNER JOIN sys.query_store_query AS q WITH (NOLOCK)
ON q.query_id  = od.query_id
INNER JOIN sys.query_store_query_text AS qt WITH (NOLOCK)
ON q.query_text_id = qt.query_text_id
INNER JOIN sys.query_store_plan AS p WITH (NOLOCK)
ON q.query_id = p.query_id
WHERE od.RN <= 50 
ORDER BY od.total_cpu_time DESC OPTION (RECOMPILE);
------

-- New for SQL Server 2016
-- Requires that QueryStore is enabled for this database




-- Get input buffer information for the current database (Query 85) (Input Buffer)
SELECT es.session_id, DB_NAME(es.database_id) AS [Database Name],
       es.login_time, es.cpu_time, es.logical_reads, es.memory_usage,
       es.[status], ib.event_info AS [Input Buffer]
FROM sys.dm_exec_sessions AS es WITH (NOLOCK)
CROSS APPLY sys.dm_exec_input_buffer(es.session_id, NULL) AS ib
WHERE es.database_id = DB_ID()
AND es.session_id > 50
AND es.session_id <> @@SPID OPTION (RECOMPILE);
------

-- Gives you input buffer information from all non-system sessions for the current database
-- Replaces DBCC INPUTBUFFER

-- New DMF for retrieving input buffer in SQL Server
-- https://bit.ly/2uHKMbz

-- sys.dm_exec_input_buffer (Transact-SQL)
-- https://bit.ly/2J5Hf9q



-- Look at recent Full backups for the current database (Query 86) (Recent Full Backups)
SELECT TOP (30) bs.machine_name, bs.server_name, bs.database_name AS [Database Name], bs.recovery_model,
CONVERT (BIGINT, bs.backup_size / 1048576 ) AS [Uncompressed Backup Size (MB)],
CONVERT (BIGINT, bs.compressed_backup_size / 1048576 ) AS [Compressed Backup Size (MB)],
CONVERT (NUMERIC (20,2), (CONVERT (FLOAT, bs.backup_size) /
CONVERT (FLOAT, bs.compressed_backup_size))) AS [Compression Ratio], bs.has_backup_checksums, bs.is_copy_only, bs.encryptor_type,
DATEDIFF (SECOND, bs.backup_start_date, bs.backup_finish_date) AS [Backup Elapsed Time (sec)],
bs.backup_finish_date AS [Backup Finish Date], bmf.physical_device_name AS [Backup Location], bmf.physical_block_size
FROM msdb.dbo.backupset AS bs WITH (NOLOCK)
INNER JOIN msdb.dbo.backupmediafamily AS bmf WITH (NOLOCK)
ON bs.media_set_id = bmf.media_set_id  
WHERE bs.database_name = DB_NAME(DB_ID())
AND bs.[type] = 'D' -- Change to L if you want Log backups
ORDER BY bs.backup_finish_date DESC OPTION (RECOMPILE);
------

-- Are your backup sizes and times changing over time?
-- Are you using backup compression?
-- Are you using backup checksums?
-- Are you doing copy_only backups?
-- Are you doing encrypted backups?
-- Have you done any backup tuning with striped backups, or changing the parameters of the backup command?

-- In SQL Server 2016, native SQL Server backup compression actually works 
-- much better with databases that are using TDE than in previous versions
-- https://bit.ly/28Rpb2x


-- These four Pluralsight Courses go into more detail about how to run these queries and interpret the results

-- SQL Server 2017: Diagnosing Configuration Issues with DMVs
-- https://bit.ly/2MSUDUL

-- SQL Server 2014 DMV Diagnostic Queries � Part 1 
-- https://bit.ly/2plxCer

-- SQL Server 2014 DMV Diagnostic Queries � Part 2
-- https://bit.ly/2IuJpzI

-- SQL Server 2014 DMV Diagnostic Queries � Part 3
-- https://bit.ly/2FIlCPb



-- Sign up for Microsoft Visual Studio Dev Essentials and get a free three month pass to Pluralsight

-- Microsoft Visual Studio Dev Essentials
-- http://bit.ly/1q6xbDL


-- Sign up for Microsoft Azure Essentials and get lots of free Azure usage credits, MCP exam voucher, three month Pluralsight subscription

-- Microsoft Azure Essentials
-- https://bit.ly/2JMWe8x


-- August 2017 blog series about upgrading and migrating to SQL Server 2016/2017
-- https://bit.ly/2ftKVrX

tools\dbatools\bin\smo\Microsoft.Data.Tools.Schema.Sql.dll

md5: 54A947A8CED5A122FFA7B0A84041420E | sha1: C631EA3C22410A317252CAF41950B75F4C5488BE | sha256: 17AB90D36B5E3E3F4D76E80213C9B539448FDD46FAFD2CBD306465044C1629EC | sha512: A7AF2D5E7A3E8DACDD44B9492C4A14C78633B51D0AEE58EDFE88EFC9D231C78F3CC42D66948DB8A1C58F44434B864EAE9D367C4E8F7B19A4099847D59A9DE07F

tools\dbatools\bin\smo\Microsoft.Data.Tools.Schema.SqlTasks.targets

tools\dbatools\bin\smo\Microsoft.Data.Tools.Schema.Tasks.Sql.dll

md5: B5AFC86E733FE19DAE8A6DFB71901A4E | sha1: F076620639B6EAF2A086292D46F479457730ACAA | sha256: 6387E707E5A9983C27879462AE1A9FE0AD336A27425113EE064380B7B006CD71 | sha512: 44469F97E547AE8B8EB18557BB2B607C3EAF914B0A1F9FC2691FA46493D6CDD554E52FA9F0147A7560D3C5D2E7F5B006ACDB65558340C9C5433016965AC0EC72

tools\dbatools\bin\smo\Microsoft.Data.Tools.Schema.Utilities.Sql.dll

md5: B3A6CA5EE94FF2E86811D687658555C1 | sha1: 5D22774B875DEC5AC4BDF36BF69C05E7E6280A81 | sha256: 1C3B90F76D5E7908C15688F5138EECDBC208D3C4D33ACE7CA79BCC52B3A17F14 | sha512: A76524B0D47BA4E5AE36A3EB9523AB598ABE7BB9F0C7354E2FDC278C3DFDA4CD2051749F36E8309E1D85ADD6392BEC93BB858E1622A3EE7F07B016A7AF24C314

tools\dbatools\bin\smo\Microsoft.Data.Tools.Utilities.dll

md5: C6CC649FA71CA67148297E8A5993DBE3 | sha1: 82CDF6397A03D9B8931A6BC8D6296951F790FB35 | sha256: EFF493CEFF05385D55183A1FBC45311AD92781A5484FB0E15A725016B7EFB8D9 | sha512: 6D655FE5BBE7A6B644F9A21F54613189DB9C55BD560B7D9565873650137ECB8EBAFC4DE1F04E4338E8EC670716394ECE9850C0DA654111D27F54FEDF9E15B474

tools\dbatools\bin\smo\Microsoft.DataTransfer.Common.Utils.dll

md5: B628255C8F1E2AFBCCF2D8DBF02779E4 | sha1: 2F53622D555DDD30882CF128AD69C38A1F4E392C | sha256: 25C8FBEA431843B4150E2E4A770139C3B52C8D3EEBA983D38B03313F00271D7E | sha512: 702F2036C303BD97C7A6A76EE79B03A0B46D604A0FAD306FEEE023D6857CACFFDBD291E95D094607AF5A90456F3C971E5939D91A43E8C37BBBEE911BA24B2BFB

tools\dbatools\bin\smo\Microsoft.Practices.TransientFaultHandling.Core.dll

md5: 04C9A563ED69D537D753B5A45F870B44 | sha1: 28EBC515826108FA736A5D34DDDCAE86A52FFC10 | sha256: 09AE9F682D0E610AE4C560891EB103C2F1E16B18780CC60856EEA5B953402F5D | sha512: 963CA4299050C8ECCE9D1DDD5DD569A9CC1E241880D6294D5E8D3CDD2E05A42B3ABB483013C96BF5F18B27BF1C39BF68484503F61D66DCA587C527CA7675CF22

tools\dbatools\bin\smo\Microsoft.SqlServer.BatchParser.dll

md5: 9B2DA9E2F4CA29792614DA567EEE4DB4 | sha1: C44D1E8DEBBF1E197F4DF8F1FB7786EDDB00420E | sha256: 28DB74E05232B7C15F2832C548B77998164730D959564A3652CAD4937F445221 | sha512: 9449A2A614A9D06723B7687F933DB42984414DDDD4EAE8C0D807251E21199FD6ED8A3221BC29AA813121EE4D609785F7D085140725B5274F3AE3EBFFCDBAC3C7

tools\dbatools\bin\smo\Microsoft.SqlServer.BatchParserClient.dll

md5: C253D24E75845D8BA3B483CB5937E725 | sha1: 80B24C4001B0D6D99842048272B9CE8C17020557 | sha256: 01B28FA8B11AF5100098DD026E4C636736D932C0FDFBA00ED7C85054E1AE628B | sha512: B3A9B16342B0AC540B833FD57DE9D739E3507CDCB0503492BE42C5747561444812F8F024D5D443E9241744FDFB3A1303E762AC65DCA3DD0DF6EA6B322ACE4C11

tools\dbatools\bin\smo\Microsoft.SqlServer.BulkInsertTaskConnections.dll

md5: 336D96B873E2C70F6C81370F19521E09 | sha1: 3E9DEA38211CB0FA680127CAABD358F9DA54F270 | sha256: DFD6BE0724F0ECF76A1DA670B40A5D155C3B9043E598411B79813FF4B21984E4 | sha512: A02E4B667BCFAEB68D12515D38FA5F7CBBBE6983EEC989947941FA5FD63A717CC5F6A38E8B8FB24058D3D348959B0BA1A3D043EB211BB70CDA47B1684174CCE7

tools\dbatools\bin\diagnosticquery\SQLServerDiagnosticQueries_2014_201810.sql


-- SQL Server 2014 Diagnostic Information Queries
-- Glenn Berry 
-- Last Modified: November 14, 2018
-- https://www.sqlskills.com/blogs/glenn/
-- http://sqlserverperformance.wordpress.com/
-- Twitter: GlennAlanBerry

-- Please listen to my Pluralsight courses
-- https://www.pluralsight.com/author/glenn-berry

-- If you want to find all of our SQLskills SQL101 blog posts, check out https://www.sqlskills.com/help/sql101/


-- Please make sure you are using the correct version of these diagnostic queries for your version of SQL Server!


-- If you like PowerShell, there is a very useful community solution for running these queries in an automated fashion
-- https://dbatools.io/

-- Invoke-DbaDiagnosticQuery
-- https://dbatools.io/functions/invoke-dbadiagnosticquery/


--******************************************************************************
--*   Copyright (C) 2018 Glenn Berry, SQLskills.com
--*   All rights reserved. 
--*
--*   For more scripts and sample code, check out 
--*      https://www.sqlskills.com/blogs/glenn
--*
--*   You may alter this code for your own *non-commercial* purposes. You may
--*   republish altered code as long as you include this copyright and give due credit. 
--*
--*
--*   THIS CODE AND INFORMATION ARE PROVIDED "AS IS" WITHOUT WARRANTY OF 
--*   ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED 
--*   TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A
--*   PARTICULAR PURPOSE. 
--*
--******************************************************************************

-- Check the major product version to see if it is SQL Server 2014 CTP2 or greater
IF NOT EXISTS (SELECT * WHERE CONVERT(varchar(128), SERVERPROPERTY('ProductVersion')) LIKE '12%')
	BEGIN
		DECLARE @ProductVersion varchar(128) = CONVERT(varchar(128), SERVERPROPERTY('ProductVersion'));
		RAISERROR ('Script does not match the ProductVersion [%s] of this instance. Many of these queries may not work on this version.' , 18 , 16 , @ProductVersion);
	END
	ELSE
		PRINT N'You have the correct major version of SQL Server for this diagnostic information script';
	

-- Instance level queries *******************************

-- SQL and OS Version information for current instance  (Query 1) (Version Info)
SELECT @@SERVERNAME AS [Server Name], @@VERSION AS [SQL Server and OS Version Info];
------

-- SQL Server 2014 RTM Branch Builds						SQL Server 2014 SP1 Branch Builds						SQL Server 2014 SP2 Branch Builds					SQL Server 2014 SP23 Branch Builds				
-- Build			Description			Release Date		Build			Description		Release Date			Build			Description		Release Date		Build			Description		Release Date
-- 11.0.9120        CTP1				6/2/2013
-- 12.0.1524		CTP2				10/15/2013
-- 12.0.2000        RTM					4/1/2014
-- 12.0.2342        CU1                 4/21/2014
-- 12.0.2370        CU2                 6/27/2014
-- 12.0.2402		CU3					8/18/2014
-- 12.0.2430        CU4					10/21/2014
-- 12.0.2456		CU5					12/17/2014	---->	12.0.4100		SP1 RTM			5/4/2015
-- 12.0.2474		CU5 + COD HF		2/3/2015   
-- 12.0.2480		CU6					2/16/2015
-- 12.0.2495        CU7                 4/20/2015
-- 12.0.2546		CU8					6/19/2015			12.0.4416		SP1 CU1			6/19/2015
-- 12.0.2553		CU9					8/17/2015			12.0.4422		SP1 CU2			8/17/2015
-- 12.0.2556		CU10				10/19/2015          12.0.4427		SP1 CU3			10/19/2015
-- 12.0.2560		CU11				12/21/2015			12.0.4436		SP1 CU4			12/21/2015
-- 12.0.2564		CU12				2/22/2016			12.0.4439		SP1 CU5			2/22/2016
-- 12.0.2568		CU13				4/18/2016			12.0.4449		SP1 CU6			4/18/2016 (Deprecated)
--															12.0.4457		SP1 CU6 		5/30/2016 (Re-release)
-- 12.0.2569		CU14				6/20/2016			12.0.4459		SP1 CU7			6/20/2016 ----------->	12.0.5000		SP2 RTM			7/11/2016
--															12.0.4468		SP1 CU8			8/15/2016				12.0.5511		SP2 CU1			8/25/2016
--                                                          12.0.4474		SP1 CU9		    10/17/2016				12.0.5522		SP2 CU2			10/17/2016
--															12.0.4487		SP1 CU9 + HF	11/8/2016				12.0.5532		SP2 CU2 + HF    11/8/2016  
--                                                          12.0.4491       SP1 CU10		12/28/2016				12.0.5537		SP2 CU3			12/28/2016
--															12.0.4502		SP1 CU11		2/21/2017				12.0.5540		SP2 CU4			2/21/2017
--															12.0.4511		SP1 CU12        4/17/2017				12.0.5546		SP2 CU5			4/17/2017
--															12.0.4522		SP1	CU13		7/17/2017				12.0.5552		SP2 CU6			7/17/2017
--																													12.0.5556		SP2 CU7			8/28/2017
--																													12.0.5557		SP2 CU8			10/16/2017
--																													12.0.5563		SP2 CU9			12/18/2017
--																													12.0.5571		SP2 CU10		1/16/2018
--                                                                                                                  12.0.5579		SP2 CU11		3/19/2018
--																													12.0.5589		SP2 CU12		6/18/2018
--																													12.0.5590		SP2 CU13		8/27/2018
--																													12.0.5600		SP3 CU14	   10/15/2018
--																																										12.0.6024	SP3 RTM		10/30/2018	    	



-- How to determine the version, edition and update level of SQL Server and its components 
-- https://bit.ly/2oAjKgW	

-- SQL Server 2014 build versions
-- https://bit.ly/2HpmYOG

-- Where to find information about the latest SQL Server builds
-- https://bit.ly/2IGHbfY

-- Recommended updates and configuration options for SQL Server 2012 and SQL Server 2014 used with high-performance workloads
-- https://bit.ly/2Hy3zIZ

-- Performance and Stability Related Fixes in Post-SQL Server 2014 RTM Builds
-- https://bit.ly/2Hx50HU

-- Performance and Stability Related Fixes in Post-SQL Server 2014 SP1 Builds
-- https://bit.ly/2GWLx6a

-- Performance and Stability Related Fixes in Post-SQL Server 2014 SP2 Builds
-- https://bit.ly/2iJ9G4N

-- Announcing updates to the SQL Server Incremental Servicing Model (ISM)
-- https://bit.ly/1RzYITz

-- Update Center for Microsoft SQL Server
-- https://bit.ly/2pZptuQ

-- Download SQL Server Management Studio (SSMS)
-- https://bit.ly/1OcupT9

-- Download and install Azure Data Studio 
-- https://bit.ly/2vgke1A


-- Get socket, physical core and logical core count from the SQL Server Error log. (Query 2) (Core Counts)
-- This query might take a few seconds depending on the size of your error log
EXEC sys.xp_readerrorlog 0, 1, N'detected', N'socket';
------

-- This can help you determine the exact core counts used by SQL Server and whether HT is enabled or not
-- It can also help you confirm your SQL Server licensing model
-- Be on the lookout for this message "using 40 logical processors based on SQL Server licensing" 
-- (when you have more than 40 logical cores) which means grandfathered Server/CAL licensing
-- This query will return no results if your error log has been recycled since the instance was last started



-- Get selected server properties (Query 3) (Server Properties)
SELECT SERVERPROPERTY('MachineName') AS [MachineName], 
SERVERPROPERTY('ServerName') AS [ServerName],  
SERVERPROPERTY('InstanceName') AS [Instance], 
SERVERPROPERTY('IsClustered') AS [IsClustered], 
SERVERPROPERTY('ComputerNamePhysicalNetBIOS') AS [ComputerNamePhysicalNetBIOS], 
SERVERPROPERTY('Edition') AS [Edition], 
SERVERPROPERTY('ProductLevel') AS [ProductLevel],				-- What servicing branch (RTM/SP/CU)
SERVERPROPERTY('ProductUpdateLevel') AS [ProductUpdateLevel],	-- Within a servicing branch, what CU# is applied
SERVERPROPERTY('ProductVersion') AS [ProductVersion],
SERVERPROPERTY('ProductMajorVersion') AS [ProductMajorVersion], 
SERVERPROPERTY('ProductMinorVersion') AS [ProductMinorVersion], 
SERVERPROPERTY('ProductBuild') AS [ProductBuild], 
SERVERPROPERTY('ProductBuildType') AS [ProductBuildType],		      -- Is this a GDR or OD hotfix (NULL if on a CU build)
SERVERPROPERTY('ProductUpdateReference') AS [ProductUpdateReference], -- KB article number that is applicable for this build
SERVERPROPERTY('ProcessID') AS [ProcessID],
SERVERPROPERTY('Collation') AS [Collation], 
SERVERPROPERTY('IsFullTextInstalled') AS [IsFullTextInstalled], 
SERVERPROPERTY('IsIntegratedSecurityOnly') AS [IsIntegratedSecurityOnly],
SERVERPROPERTY('FilestreamConfiguredLevel') AS [FilestreamConfiguredLevel],
SERVERPROPERTY('IsHadrEnabled') AS [IsHadrEnabled], 
SERVERPROPERTY('HadrManagerStatus') AS [HadrManagerStatus],
SERVERPROPERTY('InstanceDefaultDataPath') AS [InstanceDefaultDataPath],
SERVERPROPERTY('InstanceDefaultLogPath') AS [InstanceDefaultLogPath],
SERVERPROPERTY('BuildClrVersion') AS [Build CLR Version],
SERVERPROPERTY('IsXTPSupported') AS [IsXTPSupported];
------

-- This gives you a lot of useful information about your instance of SQL Server,
-- such as the ProcessID for SQL Server and your collation
-- Note: Some columns will be NULL on older SQL Server builds

-- SERVERPROPERTY (Transact-SQL)
-- https://bit.ly/2eeaXeI


-- Get instance-level configuration values for instance  (Query 4) (Configuration Values)
SELECT name, value, value_in_use, minimum, maximum, [description], is_dynamic, is_advanced
FROM sys.configurations WITH (NOLOCK)
ORDER BY name OPTION (RECOMPILE);
------

-- Focus on these settings:
-- backup checksum default (should be 1)
-- backup compression default (should be 1 in most cases)
-- clr enabled (only enable if it is needed)
-- cost threshold for parallelism (depends on your workload)
-- lightweight pooling (should be zero)
-- max degree of parallelism (depends on your workload and hardware)
-- max server memory (MB) (set to an appropriate value, not the default)
-- optimize for ad hoc workloads (should be 1)
-- priority boost (should be zero)
-- remote admin connections (should be 1)


-- Returns a list of all global trace flags that are enabled (Query 5) (Global Trace Flags)
DBCC TRACESTATUS (-1);
------

-- If no global trace flags are enabled, no results will be returned.
-- It is very useful to know what global trace flags are currently enabled as part of the diagnostic process.

-- Common trace flags that should be enabled in most cases
-- TF 1117 - When growing a data file, grow all files at the same time so they remain the same size, reducing allocation contention points
--           https://bit.ly/2GY1kOl
-- 
-- TF 1118 - Helps alleviate allocation contention in tempdb, SQL Server allocates full extents to each database object, 
--           thereby eliminating the contention on SGAM pages (more important with older versions of SQL Server)
--           Recommendations to reduce allocation contention in SQL Server tempdb database
--           https://bit.ly/2GY1kOl

-- TF 2371 - Lowers auto update statistics threshold for large tables (on tables with more than 25,000 rows)
--           https://bit.ly/2HySkAg

-- TF 3226 - Supresses logging of successful database backup messages to the SQL Server Error Log
--           https://bit.ly/2p6MTjS

-- TF 3449 - Enables use of dirty page manager (SQL Server 2014 SP1 CU7 and later)
--			 https://bit.ly/2uj0h5M

-- TF 6533 - Spatial performance improvements in SQL Server 2012 and 2014
--           https://bit.ly/2v7C7ze

-- TF 6534 - Enables use of native code to improve performance with spatial data
--           https://bit.ly/2HrQUpU

-- TF 8079 - Enables automatic soft-NUMA on systems with eight or more physical cores per NUMA node (with SQL Server 2014 SP2)
--           https://bit.ly/29B7oR8

-- DBCC TRACEON - Trace Flags (Transact-SQL)
-- https://bit.ly/2FuSvPg



-- Returns status of instant file initialization (Query 6) (IFI Status)
EXEC sys.xp_readerrorlog 0, 1, N'Database Instant File Initialization';
------

-- Lets you determine whether Instant File Initialization (IFI) is enabled for the instance
-- This should be enabled in the vast majority of cases


-- Database Instant File Initialization
-- https://bit.ly/2nTX74y

-- Misconceptions around instant file initialization
-- https://bit.ly/2oBSKgZ



-- SQL Server Process Address space info  (Query 7) (Process Memory)
-- (shows whether locked pages is enabled, among other things)
SELECT physical_memory_in_use_kb/1024 AS [SQL Server Memory Usage (MB)],
	   locked_page_allocations_kb/1024 AS [SQL Server Locked Pages Allocation (MB)],
       large_page_allocations_kb/1024 AS [SQL Server Large Pages Allocation (MB)], 
	   page_fault_count, memory_utilization_percentage, available_commit_limit_kb, 
	   process_physical_memory_low, process_virtual_memory_low
FROM sys.dm_os_process_memory WITH (NOLOCK) OPTION (RECOMPILE);
------

-- You want to see 0 for process_physical_memory_low
-- You want to see 0 for process_virtual_memory_low
-- This indicates that you are not under internal memory pressure
-- If locked_page_allocations_kb > 0, then LPIM is enabled

-- How to enable the "locked pages" feature in SQL Server 2012
-- https://bit.ly/2F5UjOA

-- Memory Management Architecture Guide
-- https://bit.ly/2JKkadC 



-- SQL Server Services information (Query 8) (SQL Server Services Info)
SELECT servicename, process_id, startup_type_desc, status_desc, 
last_startup_time, service_account, is_clustered, cluster_nodename, [filename]
FROM sys.dm_server_services WITH (NOLOCK) OPTION (RECOMPILE);
------

-- Tells you the account being used for the SQL Server Service and the SQL Agent Service
-- Shows the process_id, when they were last started, and their current status
-- Also shows whether you are running on a failover cluster instance, and what node you are running on

-- sys.dm_server_services (Transact-SQL)
-- https://bit.ly/2oKa1Un


-- Last backup information by database  (Query 9) (Last Backup By Database)
SELECT ISNULL(d.[name], bs.[database_name]) AS [Database], d.recovery_model_desc AS [Recovery Model], 
       d.log_reuse_wait_desc AS [Log Reuse Wait Desc],
    MAX(CASE WHEN [type] = 'D' THEN bs.backup_finish_date ELSE NULL END) AS [Last Full Backup],
    MAX(CASE WHEN [type] = 'I' THEN bs.backup_finish_date ELSE NULL END) AS [Last Differential Backup],
    MAX(CASE WHEN [type] = 'L' THEN bs.backup_finish_date ELSE NULL END) AS [Last Log Backup]
FROM sys.databases AS d WITH (NOLOCK)
LEFT OUTER JOIN msdb.dbo.backupset AS bs WITH (NOLOCK)
ON bs.[database_name] = d.[name] 
AND bs.backup_finish_date > GETDATE()- 30
WHERE d.name <> N'tempdb'
GROUP BY ISNULL(d.[name], bs.[database_name]), d.recovery_model_desc, d.log_reuse_wait_desc, d.[name] 
ORDER BY d.recovery_model_desc, d.[name] OPTION (RECOMPILE);
------

-- This helps you spot runaway transaction logs and other issues with your backup schedule


-- Get SQL Server Agent jobs and Category information (Query 10) (SQL Server Agent Jobs)
SELECT sj.name AS [Job Name], sj.[description] AS [Job Description], SUSER_SNAME(sj.owner_sid) AS [Job Owner],
sj.date_created AS [Date Created], sj.[enabled] AS [Job Enabled], 
sj.notify_email_operator_id, sj.notify_level_email, sc.name AS [CategoryName],
s.[enabled] AS [Sched Enabled], js.next_run_date, js.next_run_time
FROM msdb.dbo.sysjobs AS sj WITH (NOLOCK)
INNER JOIN msdb.dbo.syscategories AS sc WITH (NOLOCK)
ON sj.category_id = sc.category_id
LEFT OUTER JOIN msdb.dbo.sysjobschedules AS js WITH (NOLOCK)
ON sj.job_id = js.job_id
LEFT OUTER JOIN msdb.dbo.sysschedules AS s WITH (NOLOCK)
ON js.schedule_id = s.schedule_id
ORDER BY sj.name OPTION (RECOMPILE);
------

-- Gives you some basic information about your SQL Server Agent jobs, who owns them and how they are configured
-- Look for Agent jobs that are not owned by sa
-- Look for jobs that have a notify_email_operator_id set to 0 (meaning no operator)
-- Look for jobs that have a notify_level_email set to 0 (meaning no e-mail is ever sent)
--
-- MSDN sysjobs documentation
-- https://bit.ly/2paDEOP 

-- SQL Server Maintenance Solution
-- https://bit.ly/1pgchQu  


-- Get SQL Server Agent Alert Information (Query 11) (SQL Server Agent Alerts)
SELECT name, event_source, message_id, severity, [enabled], has_notification, 
       delay_between_responses, occurrence_count, last_occurrence_date, last_occurrence_time
FROM msdb.dbo.sysalerts WITH (NOLOCK)
ORDER BY name OPTION (RECOMPILE);
------

-- Gives you some basic information about your SQL Server Agent Alerts 
-- (which are different from SQL Server Agent jobs)
-- Read more about Agent Alerts here: https://bit.ly/2Giz0Xf 



-- Windows information (Query 12) (Windows Info)
SELECT windows_release, windows_service_pack_level, 
       windows_sku, os_language_version
FROM sys.dm_os_windows_info WITH (NOLOCK) OPTION (RECOMPILE);
------

-- Gives you major OS version, Service Pack, Edition, and language info for the operating system
-- 10.0 is either Windows 10 or Windows Server 2016
-- 6.3 is either Windows 8.1, or Windows Server 2012 R2  
-- 6.2 is either Windows 8 or Windows Server 2012
-- 6.1 is either Windows 7 or Windows Server 2008 R2
-- 6.0 is either Windows Vista or Windows Server 2008

-- Windows SKU codes
-- 4 is Enterprise Edition
-- 7 is Standard Server Edition
-- 8 is Datacenter Server Edition
-- 10 is Enterprise Server Edition
-- 48 is Professional Edition
-- 161 is Pro for Workstations

-- 1033 for os_language_version is US-English

-- SQL Server 2014 requires Windows Server 2008 SP2 or newer

-- Hardware and Software Requirements for Installing SQL Server 2014
-- https://bit.ly/1yRYXkQ

-- Using SQL Server in Windows 8 and later versions of Windows operating system 
-- https://bit.ly/2F7Ax0P



-- SQL Server NUMA Node information  (Query 13) (SQL Server NUMA Info)
SELECT node_id, node_state_desc, memory_node_id, processor_group, online_scheduler_count, 
       idle_scheduler_count, active_worker_count, avg_load_balance, resource_monitor_state
FROM sys.dm_os_nodes WITH (NOLOCK) 
WHERE node_state_desc <> N'ONLINE DAC' OPTION (RECOMPILE);
------

-- Gives you some useful information about the composition and relative load on your NUMA nodes
-- You want to see an equal number of schedulers on each NUMA node
-- Watch out if SQL Server 2014 Standard Edition has been installed 
-- on a physical or virtual machine with more than four sockets or more than 16 physical cores

-- sys.dm_os_nodes (Transact-SQL)
-- https://bit.ly/2pn5Mw8

-- Balancing Your Available SQL Server Core Licenses Evenly Across NUMA Nodes
-- https://bit.ly/2vfC4Rq



-- Good basic information about OS memory amounts and state  (Query 14) (System Memory)
SELECT total_physical_memory_kb/1024 AS [Physical Memory (MB)], 
       available_physical_memory_kb/1024 AS [Available Memory (MB)], 
       total_page_file_kb/1024 AS [Total Page File (MB)], 
	   available_page_file_kb/1024 AS [Available Page File (MB)], 
	   system_cache_kb/1024 AS [System Cache (MB)],
       system_memory_state_desc AS [System Memory State]
FROM sys.dm_os_sys_memory WITH (NOLOCK) OPTION (RECOMPILE);
------

-- You want to see "Available physical memory is high" for System Memory State
-- This indicates that you are not under external memory pressure

-- Possible System Memory State values:
-- Available physical memory is high
-- Physical memory usage is steady
-- Available physical memory is low
-- Available physical memory is running low
-- Physical memory state is transitioning

-- sys.dm_os_sys_memory (Transact-SQL)
-- https://bit.ly/2pcV0xq



-- You can skip the next two queries if you know you don't have a clustered instance


-- Get information about your cluster nodes and their status  (Query 15) (Cluster Node Properties)
-- (if your database server is in a failover cluster)
SELECT NodeName, status_description, is_current_owner
FROM sys.dm_os_cluster_nodes WITH (NOLOCK) OPTION (RECOMPILE);
------

-- Knowing which node owns the cluster resources is critical
-- Especially when you are installing Windows or SQL Server updates
-- You will see no results if your instance is not clustered

-- Recommended hotfixes and updates for Windows Server 2012 R2-based failover clusters
-- https://bit.ly/1z5BfCw


-- Get information about any AlwaysOn AG cluster this instance is a part of (Query 16) (AlwaysOn AG Cluster)
SELECT cluster_name, quorum_type_desc, quorum_state_desc
FROM sys.dm_hadr_cluster WITH (NOLOCK) OPTION (RECOMPILE);
------

-- You will see no results if your instance is not using AlwaysOn AGs


-- Good overview of AG health and status (Query 17) (AlwaysOn AG Status)
SELECT ag.name AS [AG Name], ar.replica_server_name, ar.availability_mode_desc, adc.[database_name], 
       drs.is_local, drs.is_primary_replica, drs.synchronization_state_desc, drs.is_commit_participant, 
	   drs.synchronization_health_desc, drs.recovery_lsn, drs.truncation_lsn, drs.last_sent_lsn, 
	   drs.last_sent_time, drs.last_received_lsn, drs.last_received_time, drs.last_hardened_lsn, 
	   drs.last_hardened_time, drs.last_redone_lsn, drs.last_redone_time, drs.log_send_queue_size, 
	   drs.log_send_rate, drs.redo_queue_size, drs.redo_rate, drs.filestream_send_rate, 
	   drs.end_of_log_lsn, drs.last_commit_lsn, drs.last_commit_time, drs.database_state_desc 
FROM sys.dm_hadr_database_replica_states AS drs WITH (NOLOCK)
INNER JOIN sys.availability_databases_cluster AS adc WITH (NOLOCK)
ON drs.group_id = adc.group_id 
AND drs.group_database_id = adc.group_database_id
INNER JOIN sys.availability_groups AS ag WITH (NOLOCK)
ON ag.group_id = drs.group_id
INNER JOIN sys.availability_replicas AS ar WITH (NOLOCK)
ON drs.group_id = ar.group_id 
AND drs.replica_id = ar.replica_id
ORDER BY ag.name, ar.replica_server_name, adc.[database_name] OPTION (RECOMPILE);

-- You will see no results if your instance is not using AlwaysOn AGs


-- Hardware information from SQL Server 2014  (Query 18) (Hardware Info)
SELECT cpu_count AS [Logical CPU Count], scheduler_count, 
       hyperthread_ratio AS [Hyperthread Ratio],
       cpu_count/hyperthread_ratio AS [Physical CPU Count], 
       physical_memory_kb/1024 AS [Physical Memory (MB)], 
	   committed_kb/1024 AS [Committed Memory (MB)],
       committed_target_kb/1024 AS [Committed Target Memory (MB)],
       max_workers_count AS [Max Workers Count], 
	   affinity_type_desc AS [Affinity Type], 
       sqlserver_start_time AS [SQL Server Start Time],
	   DATEDIFF(hour, sqlserver_start_time, GETDATE()) AS [SQL Server Up Time (hrs)],
	   virtual_machine_type_desc AS [Virtual Machine Type]
FROM sys.dm_os_sys_info WITH (NOLOCK) OPTION (RECOMPILE);
------

-- Gives you some good basic hardware information about your database server
-- Cannot distinguish between HT and multi-core
-- Note: virtual_machine_type_desc of HYPERVISOR does not automatically mean you are running SQL Server inside of a VM
-- It merely indicates that you have a hypervisor running on your host

-- sys.dm_os_sys_info (Transact-SQL)
-- https://bit.ly/2pczOYs

-- Soft NUMA configuration was a new column for SQL Server 2016
-- OFF = Soft-NUMA feature is OFF
-- ON = SQL Server automatically determines the NUMA node sizes for Soft-NUMA
-- MANUAL = Manually configured soft-NUMA

-- Configure SQL Server to Use Soft-NUMA (SQL Server)
-- https://bit.ly/2HTpKJt



-- Get System Manufacturer and model number from SQL Server Error log (Query 19) (System Manufacturer)
EXEC sys.xp_readerrorlog 0, 1, N'Manufacturer';
------ 

-- This can help you determine the capabilities and capacities of your database server
-- Can also be used to confirm if you are running in a VM
-- This query might take a few seconds if you have not recycled your error log recently
-- This query will return no results if your error log has been recycled since the instance was started


-- Get pvscsi info from Windows Registry  (Query 20) (PVSCSI Driver Parameters)
EXEC sys.xp_instance_regread N'HKEY_LOCAL_MACHINE', N'SYSTEM\CurrentControlSet\services\pvscsi\Parameters\Device', N'DriverParameter';
------

-- This is valid for VMware VMs
-- Recommended value for intensive I/O patterns from VMware is: RequestRingPages=32,MaxQueueDepth=254
-- https://kb.vmware.com/s/article/2053145


-- Get BIOS date from Windows Registry (Query 21) (BIOS Date)
EXEC sys.xp_instance_regread N'HKEY_LOCAL_MACHINE', N'HARDWARE\DESCRIPTION\System\BIOS', N'BiosReleaseDate';
------

-- Helps you understand whether the main system BIOS is up to date, and the possible age of the hardware
-- Not as useful for virtualization


-- Get processor description from Windows Registry  (Query 22) (Processor Description)
EXEC sys.xp_instance_regread N'HKEY_LOCAL_MACHINE', N'HARDWARE\DESCRIPTION\System\CentralProcessor\0', N'ProcessorNameString';
------

-- Gives you the model number and rated clock speed of your processor(s)
-- Your processors may be running at less than the rated clock speed due
-- to the Windows Power Plan or hardware power management

-- You can use CPU-Z to get your actual CPU core speed and a lot of other useful information
-- https://bit.ly/QhR6xF

-- You can learn more about processor selection for SQL Server by following this link
-- https://bit.ly/2F3aVlP



-- See if buffer pool extension (BPE) is enabled (Query 23) (BPE Configuration)
SELECT [path], state_description, current_size_in_kb, 
CAST(current_size_in_kb/1048576.0 AS DECIMAL(10,2)) AS [Size (GB)]
FROM sys.dm_os_buffer_pool_extension_configuration WITH (NOLOCK) OPTION (RECOMPILE);
------

-- BPE is available in both Standard Edition and Enterprise Edition
-- It is a more interesting feature for Standard Edition

-- Buffer Pool Extension to SSDs in SQL Server 2014
-- https://bit.ly/1bm08m8

-- Buffer Pool Extension
-- https://bit.ly/2oBuieO



-- Look at buffer descriptors to see BPE usage by database (Query 24) (BPE Usage) 
SELECT DB_NAME(database_id) AS [Database Name], COUNT(page_id) AS [Page Count],
CAST(COUNT(*)/128.0 AS DECIMAL(10, 2)) AS [Buffer size(MB)], 
AVG(read_microsec) AS [Avg Read Time (microseconds)]
FROM sys.dm_os_buffer_descriptors WITH (NOLOCK)
WHERE database_id <> 32767
AND is_in_bpool_extension = 1
GROUP BY DB_NAME(database_id) 
ORDER BY [Buffer size(MB)] DESC OPTION (RECOMPILE);
------

-- You will see no results if BPE is not enabled or if there is no BPE usage


-- Get information on location, time and size of any memory dumps from SQL Server  (Query 25) (Memory Dump Info)
SELECT [filename], creation_time, size_in_bytes/1048576.0 AS [Size (MB)]
FROM sys.dm_server_memory_dumps WITH (NOLOCK) 
ORDER BY creation_time DESC OPTION (RECOMPILE);
------

-- This will not return any rows if you have 
-- not had any memory dumps (which is a good thing)

-- sys.dm_server_memory_dumps (Transact-SQL)
-- https://bit.ly/2elwWll



-- Look at Suspect Pages table (Query 26) (Suspect Pages)
SELECT DB_NAME(database_id) AS [Database Name], [file_id], page_id, 
       event_type, error_count, last_update_date 
FROM msdb.dbo.suspect_pages WITH (NOLOCK)
ORDER BY database_id OPTION (RECOMPILE);
------

-- event_type value descriptions
-- 1 = 823 error caused by an operating system CRC error
--     or 824 error other than a bad checksum or a torn page (for example, a bad page ID)
-- 2 = Bad checksum
-- 3 = Torn page
-- 4 = Restored (The page was restored after it was marked bad)
-- 5 = Repaired (DBCC repaired the page)
-- 7 = Deallocated by DBCC

-- Ideally, this query returns no results. The table is limited to 1000 rows.
-- If you do get results here, you should do further investigation to determine the root cause

-- Manage the suspect_pages Table
-- https://bit.ly/2Fvr1c9


-- Get number of data files in tempdb database (Query 27) (Tempdb Data Files)
EXEC sys.xp_readerrorlog 0, 1, N'The tempdb database has';
------

-- Get the number of data files in the tempdb database
-- 4-8 data files that are all the same size is a good starting point
-- This query will return no results if your error log has been recycled since the instance was last started
-- This will be blank unless you have Service Pack 2 or later


-- File names and paths for all user and system databases on instance  (Query 28) (Database Filenames and Paths)
SELECT DB_NAME([database_id]) AS [Database Name], 
       [file_id], [name], physical_name, [type_desc], state_desc,
	   is_percent_growth, growth,
	   CONVERT(bigint, growth/128.0) AS [Growth in MB], 
       CONVERT(bigint, size/128.0) AS [Total Size in MB]
FROM sys.master_files WITH (NOLOCK)
ORDER BY DB_NAME([database_id]), [file_id] OPTION (RECOMPILE);
------

-- Things to look at:
-- Are data files and log files on different drives?
-- Is everything on the C: drive?
-- Is tempdb on dedicated drives?
-- Is there only one tempdb data file?
-- Are all of the tempdb data files the same size?
-- Are there multiple data files for user databases?
-- Is percent growth enabled for any files (which is bad)?


-- Volume info for all LUNS that have database files on the current instance (Query 29) (Volume Info)
SELECT DISTINCT vs.volume_mount_point, vs.file_system_type, vs.logical_volume_name, 
CONVERT(DECIMAL(18,2), vs.total_bytes/1073741824.0) AS [Total Size (GB)],
CONVERT(DECIMAL(18,2), vs.available_bytes/1073741824.0) AS [Available Size (GB)],  
CONVERT(DECIMAL(18,2), vs.available_bytes * 1. / vs.total_bytes * 100.) AS [Space Free %],
vs.supports_compression, vs.is_compressed, 
vs.supports_sparse_files, vs.supports_alternate_streams
FROM sys.master_files AS f WITH (NOLOCK)
CROSS APPLY sys.dm_os_volume_stats(f.database_id, f.[file_id]) AS vs 
ORDER BY vs.volume_mount_point OPTION (RECOMPILE);
------

-- Shows you the total and free space on the LUNs where you have database files
-- Being low on free space can negatively affect performance

-- sys.dm_os_volume_stats (Transact-SQL)
-- https://bit.ly/2oBPNNr



-- Drive level latency information (Query 30) (Drive Level Latency)
-- Based on code from Jimmy May
SELECT tab.[Drive], tab.volume_mount_point AS [Volume Mount Point], 
	CASE 
		WHEN num_of_reads = 0 THEN 0 
		ELSE (io_stall_read_ms/num_of_reads) 
	END AS [Read Latency],
	CASE 
		WHEN num_of_writes = 0 THEN 0 
		ELSE (io_stall_write_ms/num_of_writes) 
	END AS [Write Latency],
	CASE 
		WHEN (num_of_reads = 0 AND num_of_writes = 0) THEN 0 
		ELSE (io_stall/(num_of_reads + num_of_writes)) 
	END AS [Overall Latency],
	CASE 
		WHEN num_of_reads = 0 THEN 0 
		ELSE (num_of_bytes_read/num_of_reads) 
	END AS [Avg Bytes/Read],
	CASE 
		WHEN num_of_writes = 0 THEN 0 
		ELSE (num_of_bytes_written/num_of_writes) 
	END AS [Avg Bytes/Write],
	CASE 
		WHEN (num_of_reads = 0 AND num_of_writes = 0) THEN 0 
		ELSE ((num_of_bytes_read + num_of_bytes_written)/(num_of_reads + num_of_writes)) 
	END AS [Avg Bytes/Transfer]
FROM (SELECT LEFT(UPPER(mf.physical_name), 2) AS Drive, SUM(num_of_reads) AS num_of_reads,
	         SUM(io_stall_read_ms) AS io_stall_read_ms, SUM(num_of_writes) AS num_of_writes,
	         SUM(io_stall_write_ms) AS io_stall_write_ms, SUM(num_of_bytes_read) AS num_of_bytes_read,
	         SUM(num_of_bytes_written) AS num_of_bytes_written, SUM(io_stall) AS io_stall, vs.volume_mount_point 
      FROM sys.dm_io_virtual_file_stats(NULL, NULL) AS vfs
      INNER JOIN sys.master_files AS mf WITH (NOLOCK)
      ON vfs.database_id = mf.database_id AND vfs.file_id = mf.file_id
	  CROSS APPLY sys.dm_os_volume_stats(mf.database_id, mf.[file_id]) AS vs 
      GROUP BY LEFT(UPPER(mf.physical_name), 2), vs.volume_mount_point) AS tab
ORDER BY [Overall Latency] OPTION (RECOMPILE);
------

-- Shows you the drive-level latency for reads and writes, in milliseconds
-- Latency above 30-40ms is usually a problem
-- These latency numbers include all file activity against all SQL Server 
-- database files on each drive since SQL Server was last started


-- Calculates average stalls per read, per write, and per total input/output for each database file  (Query 31) (IO Latency by File)
SELECT DB_NAME(fs.database_id) AS [Database Name], CAST(fs.io_stall_read_ms/(1.0 + fs.num_of_reads) AS NUMERIC(10,1)) AS [avg_read_latency_ms],
CAST(fs.io_stall_write_ms/(1.0 + fs.num_of_writes) AS NUMERIC(10,1)) AS [avg_write_latency_ms],
CAST((fs.io_stall_read_ms + fs.io_stall_write_ms)/(1.0 + fs.num_of_reads + fs.num_of_writes) AS NUMERIC(10,1)) AS [avg_io_latency_ms],
CONVERT(DECIMAL(18,2), mf.size/128.0) AS [File Size (MB)], mf.physical_name, mf.type_desc, fs.io_stall_read_ms, fs.num_of_reads, 
fs.io_stall_write_ms, fs.num_of_writes, fs.io_stall_read_ms + fs.io_stall_write_ms AS [io_stalls], fs.num_of_reads + fs.num_of_writes AS [total_io],
io_stall_queued_read_ms AS [Resource Governor Total Read IO Latency (ms)], io_stall_queued_write_ms AS [Resource Governor Total Write IO Latency (ms)] 
FROM sys.dm_io_virtual_file_stats(null,null) AS fs
INNER JOIN sys.master_files AS mf WITH (NOLOCK)
ON fs.database_id = mf.database_id
AND fs.[file_id] = mf.[file_id]
ORDER BY avg_io_latency_ms DESC OPTION (RECOMPILE);
------

-- Helps determine which database files on the entire instance have the most I/O bottlenecks
-- This can help you decide whether certain LUNs are overloaded and whether you might
-- want to move some files to a different location or perhaps improve your I/O performance
-- These latency numbers include all file activity against each SQL Server 
-- database file since SQL Server was last started


-- Look for I/O requests taking longer than 15 seconds in the six most recent SQL Server Error Logs (Query 32) (IO Warnings)
CREATE TABLE #IOWarningResults(LogDate datetime, ProcessInfo sysname, LogText nvarchar(1000));

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 0, 1, N'taking longer than 15 seconds';

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 1, 1, N'taking longer than 15 seconds';

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 2, 1, N'taking longer than 15 seconds';

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 3, 1, N'taking longer than 15 seconds';

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 4, 1, N'taking longer than 15 seconds';

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 5, 1, N'taking longer than 15 seconds';

SELECT LogDate, ProcessInfo, LogText
FROM #IOWarningResults
ORDER BY LogDate DESC;

DROP TABLE #IOWarningResults;
------  

-- Finding 15 second I/O warnings in the SQL Server Error Log is useful evidence of
-- poor I/O performance (which might have many different causes)
-- Look to see if you see any patterns in the results (same files, same drives, same time of day, etc.)

-- Diagnostics in SQL Server help detect stalled and stuck I/O operations
-- https://bit.ly/2qtaw73


-- Resource Governor Resource Pool information (Query 33) (RG Resource Pools)
SELECT pool_id, [Name], statistics_start_time,
       min_memory_percent, max_memory_percent,  
       max_memory_kb/1024 AS [max_memory_mb],  
       used_memory_kb/1024 AS [used_memory_mb],   
       target_memory_kb/1024 AS [target_memory_mb],
	   min_iops_per_volume, max_iops_per_volume
FROM sys.dm_resource_governor_resource_pools WITH (NOLOCK)
OPTION (RECOMPILE);
------

-- sys.dm_resource_governor_resource_pools (Transact-SQL)
-- https://bit.ly/2MVU0Vy



-- Recovery model, log reuse wait description, log file size, log usage size  (Query 34) (Database Properties)
-- and compatibility level for all databases on instance
SELECT db.[name] AS [Database Name], SUSER_SNAME(db.owner_sid) AS [Database Owner], db.recovery_model_desc AS [Recovery Model], 
db.state_desc, db.containment_desc, db.log_reuse_wait_desc AS [Log Reuse Wait Description], 
CONVERT(DECIMAL(18,2), ls.cntr_value/1024.0) AS [Log Size (MB)], CONVERT(DECIMAL(18,2), lu.cntr_value/1024.0) AS [Log Used (MB)],
CAST(CAST(lu.cntr_value AS FLOAT) / CAST(ls.cntr_value AS FLOAT)AS DECIMAL(18,2)) * 100 AS [Log Used %], 
db.[compatibility_level] AS [DB Compatibility Level], db.page_verify_option_desc AS [Page Verify Option], 
db.is_auto_create_stats_on, db.is_auto_update_stats_on, db.is_auto_update_stats_async_on, db.is_parameterization_forced, 
db.snapshot_isolation_state_desc, db.is_read_committed_snapshot_on, db.is_auto_close_on, db.is_auto_shrink_on, 
db.target_recovery_time_in_seconds, db.is_cdc_enabled, db.is_published, db.is_distributor, db.is_encrypted,
db.group_database_id, db.replica_id,db.is_memory_optimized_elevate_to_snapshot_on, 
db.delayed_durability_desc, db.is_auto_create_stats_incremental_on,
db.is_encrypted, de.encryption_state, de.percent_complete, de.key_algorithm, de.key_length      
FROM sys.databases AS db WITH (NOLOCK)
INNER JOIN sys.dm_os_performance_counters AS lu WITH (NOLOCK)
ON db.name = lu.instance_name
INNER JOIN sys.dm_os_performance_counters AS ls WITH (NOLOCK)
ON db.name = ls.instance_name
LEFT OUTER JOIN sys.dm_database_encryption_keys AS de WITH (NOLOCK)
ON db.database_id = de.database_id
WHERE lu.counter_name LIKE N'Log File(s) Used Size (KB)%' 
AND ls.counter_name LIKE N'Log File(s) Size (KB)%'
AND ls.cntr_value > 0 
ORDER BY db.[name] OPTION (RECOMPILE);
------

-- Things to look at:
-- How many databases are on the instance?
-- What recovery models are they using?
-- What is the log reuse wait description?
-- How full are the transaction logs?
-- What compatibility level are the databases on? 
-- What is the Page Verify Option? (should be CHECKSUM)
-- Is Auto Update Statistics Asynchronously enabled?
-- Make sure auto_shrink and auto_close are not enabled!

 

-- Missing Indexes for all databases by Index Advantage  (Query 35) (Missing Indexes All Databases)
SELECT CONVERT(decimal(18,2), user_seeks * avg_total_user_cost * (avg_user_impact * 0.01)) AS [index_advantage],
FORMAT(migs.last_user_seek, 'yyyy-MM-dd HH:mm:ss') AS [last_user_seek], 
mid.[statement] AS [Database.Schema.Table],
COUNT(1) OVER(PARTITION BY mid.[statement]) AS [missing_indexes_for_table],
COUNT(1) OVER(PARTITION BY mid.[statement], equality_columns) AS [similar_missing_indexes_for_table],
mid.equality_columns, mid.inequality_columns, mid.included_columns,
migs.unique_compiles, migs.user_seeks, 
CONVERT(decimal(18,2), migs.avg_total_user_cost) AS [avg_total_user_cost], migs.avg_user_impact 
FROM sys.dm_db_missing_index_group_stats AS migs WITH (NOLOCK)
INNER JOIN sys.dm_db_missing_index_groups AS mig WITH (NOLOCK)
ON migs.group_handle = mig.index_group_handle
INNER JOIN sys.dm_db_missing_index_details AS mid WITH (NOLOCK)
ON mig.index_handle = mid.index_handle
ORDER BY index_advantage DESC OPTION (RECOMPILE);
------

-- Getting missing index information for all of the databases on the instance is very useful
-- Look at last user seek time, number of user seeks to help determine source and importance
-- Also look at avg_user_impact and avg_total_user_cost to help determine importance
-- SQL Server is overly eager to add included columns, so beware
-- Do not just blindly add indexes that show up from this query!!!

-- SQL Server Index Design Guide
-- https://bit.ly/2qtZr4N



-- Get VLF Counts for all databases on the instance (Query 36) (VLF Counts)
-- (adapted from Michelle Ufford) 
CREATE TABLE #VLFInfo (RecoveryUnitID int, FileID  int,
					   FileSize bigint, StartOffset bigint,
					   FSeqNo      bigint, [Status]    bigint,
					   Parity      bigint, CreateLSN   numeric(38));
	 
CREATE TABLE #VLFCountResults(DatabaseName sysname, VLFCount int);
	 
EXEC sp_MSforeachdb N'Use [?]; 

				INSERT INTO #VLFInfo 
				EXEC sp_executesql N''DBCC LOGINFO([?])''; 
	 
				INSERT INTO #VLFCountResults 
				SELECT DB_NAME(), COUNT(*) 
				FROM #VLFInfo; 

				TRUNCATE TABLE #VLFInfo;'
	 
SELECT DatabaseName, VLFCount  
FROM #VLFCountResults
ORDER BY VLFCount DESC;
	 
DROP TABLE #VLFInfo;
DROP TABLE #VLFCountResults;
------

-- High VLF counts can affect write performance to the log file 
-- and they can make full database restores and crash recovery take much longer
-- Try to keep your VLF counts under 200 in most cases (depending on log file size)

-- Important change to VLF creation algorithm in SQL Server 2014
-- https://bit.ly/2Hsjbg4

-- SQL Server Transaction Log Architecture and Management Guide
-- https://bit.ly/2JjmQRZ



-- Get CPU utilization by database (Query 37) (CPU Usage by Database)
WITH DB_CPU_Stats
AS
(SELECT pa.DatabaseID, DB_Name(pa.DatabaseID) AS [Database Name], SUM(qs.total_worker_time/1000) AS [CPU_Time_Ms]
 FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
 CROSS APPLY (SELECT CONVERT(int, value) AS [DatabaseID] 
              FROM sys.dm_exec_plan_attributes(qs.plan_handle)
              WHERE attribute = N'dbid') AS pa
 GROUP BY DatabaseID)
SELECT ROW_NUMBER() OVER(ORDER BY [CPU_Time_Ms] DESC) AS [CPU Rank],
       [Database Name], [CPU_Time_Ms] AS [CPU Time (ms)], 
       CAST([CPU_Time_Ms] * 1.0 / SUM([CPU_Time_Ms]) OVER() * 100.0 AS DECIMAL(5, 2)) AS [CPU Percent]
FROM DB_CPU_Stats
WHERE DatabaseID <> 32767 -- ResourceDB
ORDER BY [CPU Rank] OPTION (RECOMPILE);
------

-- Helps determine which database is using the most CPU resources on the instance


-- Get I/O utilization by database (Query 38) (IO Usage By Database)
WITH Aggregate_IO_Statistics
AS (SELECT DB_NAME(database_id) AS [Database Name],
    CAST(SUM(num_of_bytes_read + num_of_bytes_written) / 1048576 AS DECIMAL(12, 2)) AS [ioTotalMB],
    CAST(SUM(num_of_bytes_read ) / 1048576 AS DECIMAL(12, 2)) AS [ioReadMB],
    CAST(SUM(num_of_bytes_written) / 1048576 AS DECIMAL(12, 2)) AS [ioWriteMB]
    FROM sys.dm_io_virtual_file_stats(NULL, NULL) AS [DM_IO_STATS]
    GROUP BY database_id)
SELECT ROW_NUMBER() OVER (ORDER BY ioTotalMB DESC) AS [I/O Rank],
        [Database Name], ioTotalMB AS [Total I/O (MB)],
        CAST(ioTotalMB / SUM(ioTotalMB) OVER () * 100.0 AS DECIMAL(5, 2)) AS [Total I/O %],
        ioReadMB AS [Read I/O (MB)], 
		CAST(ioReadMB / SUM(ioReadMB) OVER () * 100.0 AS DECIMAL(5, 2)) AS [Read I/O %],
        ioWriteMB AS [Write I/O (MB)], 
		CAST(ioWriteMB / SUM(ioWriteMB) OVER () * 100.0 AS DECIMAL(5, 2)) AS [Write I/O %]
FROM Aggregate_IO_Statistics
ORDER BY [I/O Rank] OPTION (RECOMPILE);
------

-- Helps determine which database is using the most I/O resources on the instance
-- These numbers are cumulative since the last service restart
-- They include all I/O activity, not just the nominal I/O workload


-- Get total buffer usage by database for current instance  (Query 39) (Total Buffer Usage by Database)
-- This make take some time to run on a busy instance
WITH AggregateBufferPoolUsage
AS
(SELECT DB_NAME(database_id) AS [Database Name],
CAST(COUNT(*) * 8/1024.0 AS DECIMAL (10,2))  AS [CachedSize]
FROM sys.dm_os_buffer_descriptors WITH (NOLOCK)
WHERE database_id <> 32767 -- ResourceDB
GROUP BY DB_NAME(database_id))
SELECT ROW_NUMBER() OVER(ORDER BY CachedSize DESC) AS [Buffer Pool Rank], [Database Name], CachedSize AS [Cached Size (MB)],
       CAST(CachedSize / SUM(CachedSize) OVER() * 100.0 AS DECIMAL(5,2)) AS [Buffer Pool Percent]
FROM AggregateBufferPoolUsage
ORDER BY [Buffer Pool Rank] OPTION (RECOMPILE);
------

-- Tells you how much memory (in the buffer pool) 
-- is being used by each database on the instance


-- Clear Wait Stats with this command
-- DBCC SQLPERF('sys.dm_os_wait_stats', CLEAR);

-- Isolate top waits for server instance since last restart or wait statistics clear  (Query 40) (Top Waits)
WITH [Waits] 
AS (SELECT wait_type, wait_time_ms/ 1000.0 AS [WaitS],
          (wait_time_ms - signal_wait_time_ms) / 1000.0 AS [ResourceS],
           signal_wait_time_ms / 1000.0 AS [SignalS],
           waiting_tasks_count AS [WaitCount],
           100.0 *  wait_time_ms / SUM (wait_time_ms) OVER() AS [Percentage],
           ROW_NUMBER() OVER(ORDER BY wait_time_ms DESC) AS [RowNum]
    FROM sys.dm_os_wait_stats WITH (NOLOCK)
    WHERE [wait_type] NOT IN (
        N'BROKER_EVENTHANDLER', N'BROKER_RECEIVE_WAITFOR', N'BROKER_TASK_STOP',
		N'BROKER_TO_FLUSH', N'BROKER_TRANSMITTER', N'CHECKPOINT_QUEUE',
        N'CHKPT', N'CLR_AUTO_EVENT', N'CLR_MANUAL_EVENT', N'CLR_SEMAPHORE',
        N'DBMIRROR_DBM_EVENT', N'DBMIRROR_EVENTS_QUEUE', N'DBMIRROR_WORKER_QUEUE',
		N'DBMIRRORING_CMD', N'DIRTY_PAGE_POLL', N'DISPATCHER_QUEUE_SEMAPHORE',
        N'EXECSYNC', N'FSAGENT', N'FT_IFTS_SCHEDULER_IDLE_WAIT', N'FT_IFTSHC_MUTEX',
        N'HADR_CLUSAPI_CALL', N'HADR_FILESTREAM_IOMGR_IOCOMPLETION', N'HADR_LOGCAPTURE_WAIT', 
		N'HADR_NOTIFICATION_DEQUEUE', N'HADR_TIMER_TASK', N'HADR_WORK_QUEUE',
        N'KSOURCE_WAKEUP', N'LAZYWRITER_SLEEP', N'LOGMGR_QUEUE', N'ONDEMAND_TASK_QUEUE',
        N'PWAIT_ALL_COMPONENTS_INITIALIZED', 
		N'PREEMPTIVE_OS_AUTHENTICATIONOPS', N'PREEMPTIVE_OS_CREATEFILE', N'PREEMPTIVE_OS_GENERICOPS',
		N'PREEMPTIVE_OS_LIBRARYOPS', N'PREEMPTIVE_OS_QUERYREGISTRY',
		N'PREEMPTIVE_HADR_LEASE_MECHANISM', N'PREEMPTIVE_SP_SERVER_DIAGNOSTICS',
		N'QDS_PERSIST_TASK_MAIN_LOOP_SLEEP',
        N'QDS_CLEANUP_STALE_QUERIES_TASK_MAIN_LOOP_SLEEP', N'QDS_SHUTDOWN_QUEUE', N'REQUEST_FOR_DEADLOCK_SEARCH',
		N'RESOURCE_QUEUE', N'SERVER_IDLE_CHECK', N'SLEEP_BPOOL_FLUSH', N'SLEEP_DBSTARTUP',
		N'SLEEP_DCOMSTARTUP', N'SLEEP_MASTERDBREADY', N'SLEEP_MASTERMDREADY',
        N'SLEEP_MASTERUPGRADED', N'SLEEP_MSDBSTARTUP', N'SLEEP_SYSTEMTASK', N'SLEEP_TASK',
        N'SLEEP_TEMPDBSTARTUP', N'SNI_HTTP_ACCEPT', N'SP_SERVER_DIAGNOSTICS_SLEEP',
		N'SQLTRACE_BUFFER_FLUSH', N'SQLTRACE_INCREMENTAL_FLUSH_SLEEP', N'SQLTRACE_WAIT_ENTRIES',
		N'WAIT_FOR_RESULTS', N'WAITFOR', N'WAITFOR_TASKSHUTDOWN', N'WAIT_XTP_HOST_WAIT',
		N'WAIT_XTP_OFFLINE_CKPT_NEW_LOG', N'WAIT_XTP_CKPT_CLOSE', N'XE_DISPATCHER_JOIN',
        N'XE_DISPATCHER_WAIT', N'XE_TIMER_EVENT')
    AND waiting_tasks_count > 0)
SELECT
    MAX (W1.wait_type) AS [WaitType],
	CAST (MAX (W1.Percentage) AS DECIMAL (5,2)) AS [Wait Percentage],
	CAST ((MAX (W1.WaitS) / MAX (W1.WaitCount)) AS DECIMAL (16,4)) AS [AvgWait_Sec],
    CAST ((MAX (W1.ResourceS) / MAX (W1.WaitCount)) AS DECIMAL (16,4)) AS [AvgRes_Sec],
    CAST ((MAX (W1.SignalS) / MAX (W1.WaitCount)) AS DECIMAL (16,4)) AS [AvgSig_Sec], 
    CAST (MAX (W1.WaitS) AS DECIMAL (16,2)) AS [Wait_Sec],
    CAST (MAX (W1.ResourceS) AS DECIMAL (16,2)) AS [Resource_Sec],
    CAST (MAX (W1.SignalS) AS DECIMAL (16,2)) AS [Signal_Sec],
    MAX (W1.WaitCount) AS [Wait Count],
	CAST (N'https://www.sqlskills.com/help/waits/' + W1.wait_type AS XML) AS [Help/Info URL]
FROM Waits AS W1
INNER JOIN Waits AS W2
ON W2.RowNum <= W1.RowNum
GROUP BY W1.RowNum, W1.wait_type
HAVING SUM (W2.Percentage) - MAX (W1.Percentage) < 99 -- percentage threshold
OPTION (RECOMPILE);
------

-- Cumulative wait stats are not as useful on an idle instance that is not under load or performance pressure

-- SQL Server Wait Types Library (Paul Randal)
-- https://bit.ly/2ePzYO2

-- The SQL Server Wait Type Repository
-- https://bit.ly/1afzfjC

-- Wait statistics, or please tell me where it hurts
-- https://bit.ly/2wsQHQE

-- SQL Server 2005 Performance Tuning using the Waits and Queues
-- https://bit.ly/1o2NFoF

-- sys.dm_os_wait_stats (Transact-SQL)
-- https://bit.ly/2Hjq9Yl



-- Get a count of SQL connections by IP address (Query 41) (Connection Counts by IP Address)
SELECT ec.client_net_address, es.[program_name], es.[host_name], es.login_name, 
COUNT(ec.session_id) AS [connection count] 
FROM sys.dm_exec_sessions AS es WITH (NOLOCK) 
INNER JOIN sys.dm_exec_connections AS ec WITH (NOLOCK) 
ON es.session_id = ec.session_id 
GROUP BY ec.client_net_address, es.[program_name], es.[host_name], es.login_name  
ORDER BY ec.client_net_address, es.[program_name] OPTION (RECOMPILE);
------

-- This helps you figure where your database load is coming from
-- and verifies connectivity from other machines

-- Solving Connectivity errors to SQL Server
-- https://bit.ly/2EgzoD0



-- Get Average Task Counts (run multiple times)  (Query 42) (Avg Task Counts)
SELECT AVG(current_tasks_count) AS [Avg Task Count], 
AVG(work_queue_count) AS [Avg Work Queue Count],
AVG(runnable_tasks_count) AS [Avg Runnable Task Count],
AVG(pending_disk_io_count) AS [Avg Pending DiskIO Count]
FROM sys.dm_os_schedulers WITH (NOLOCK)
WHERE scheduler_id < 255 OPTION (RECOMPILE);
------

-- Sustained values above 10 suggest further investigation in that area
-- High Avg Task Counts are often caused by blocking/deadlocking or other resource contention

-- Sustained values above 1 suggest further investigation in that area
-- High Avg Runnable Task Counts are a good sign of CPU pressure
-- High Avg Pending DiskIO Counts are a sign of disk pressure

-- How to Do Some Very Basic SQL Server Monitoring
-- https://bit.ly/2q3Btgt



-- Detect blocking (run multiple times)  (Query 42) (Detect Blocking)
SELECT t1.resource_type AS [lock type], DB_NAME(resource_database_id) AS [database],
t1.resource_associated_entity_id AS [blk object],t1.request_mode AS [lock req],  -- lock requested
t1.request_session_id AS [waiter sid], t2.wait_duration_ms AS [wait time],       -- spid of waiter  
(SELECT [text] FROM sys.dm_exec_requests AS r WITH (NOLOCK)                      -- get sql for waiter
CROSS APPLY sys.dm_exec_sql_text(r.[sql_handle]) 
WHERE r.session_id = t1.request_session_id) AS [waiter_batch],
(SELECT SUBSTRING(qt.[text],r.statement_start_offset/2, 
    (CASE WHEN r.statement_end_offset = -1 
    THEN LEN(CONVERT(nvarchar(max), qt.[text])) * 2 
    ELSE r.statement_end_offset END - r.statement_start_offset)/2) 
FROM sys.dm_exec_requests AS r WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(r.[sql_handle]) AS qt
WHERE r.session_id = t1.request_session_id) AS [waiter_stmt],					-- statement blocked
t2.blocking_session_id AS [blocker sid],										-- spid of blocker
(SELECT [text] FROM sys.sysprocesses AS p										-- get sql for blocker
CROSS APPLY sys.dm_exec_sql_text(p.[sql_handle]) 
WHERE p.spid = t2.blocking_session_id) AS [blocker_batch]
FROM sys.dm_tran_locks AS t1 WITH (NOLOCK)
INNER JOIN sys.dm_os_waiting_tasks AS t2 WITH (NOLOCK)
ON t1.lock_owner_address = t2.resource_address OPTION (RECOMPILE);
------

-- Helps troubleshoot blocking and deadlocking issues
-- The results will change from second to second on a busy system
-- You should run this query multiple times when you see signs of blocking



-- Get CPU Utilization History for last 256 minutes (in one minute intervals)  (Query 44) (CPU Utilization History)
DECLARE @ts_now bigint = (SELECT cpu_ticks/(cpu_ticks/ms_ticks) FROM sys.dm_os_sys_info WITH (NOLOCK)); 

SELECT TOP(256) SQLProcessUtilization AS [SQL Server Process CPU Utilization], 
               SystemIdle AS [System Idle Process], 
               100 - SystemIdle - SQLProcessUtilization AS [Other Process CPU Utilization], 
               DATEADD(ms, -1 * (@ts_now - [timestamp]), GETDATE()) AS [Event Time] 
FROM (SELECT record.value('(./Record/@id)[1]', 'int') AS record_id, 
			record.value('(./Record/SchedulerMonitorEvent/SystemHealth/SystemIdle)[1]', 'int') 
			AS [SystemIdle], 
			record.value('(./Record/SchedulerMonitorEvent/SystemHealth/ProcessUtilization)[1]', 'int') 
			AS [SQLProcessUtilization], [timestamp] 
	  FROM (SELECT [timestamp], CONVERT(xml, record) AS [record] 
			FROM sys.dm_os_ring_buffers WITH (NOLOCK)
			WHERE ring_buffer_type = N'RING_BUFFER_SCHEDULER_MONITOR' 
			AND record LIKE N'%<SystemHealth>%') AS x) AS y 
ORDER BY record_id DESC OPTION (RECOMPILE);
------

-- Look at the trend over the entire period 
-- Also look at high sustained 'Other Process' CPU Utilization values
-- Note: This query sometimes gives inaccurate results (negative values)
-- on high core count (> 64 cores) systems


-- Get top total worker time queries for entire instance (Query 45) (Top Worker Time Queries)
SELECT TOP(50) DB_NAME(t.[dbid]) AS [Database Name], 
REPLACE(REPLACE(LEFT(t.[text], 255), CHAR(10),''), CHAR(13),'') AS [Short Query Text],  
qs.total_worker_time AS [Total Worker Time], qs.min_worker_time AS [Min Worker Time],
qs.total_worker_time/qs.execution_count AS [Avg Worker Time], 
qs.max_worker_time AS [Max Worker Time], 
qs.min_elapsed_time AS [Min Elapsed Time], 
qs.total_elapsed_time/qs.execution_count AS [Avg Elapsed Time], 
qs.max_elapsed_time AS [Max Elapsed Time],
qs.min_logical_reads AS [Min Logical Reads],
qs.total_logical_reads/qs.execution_count AS [Avg Logical Reads],
qs.max_logical_reads AS [Max Logical Reads], 
qs.execution_count AS [Execution Count],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index], 
qs.creation_time AS [Creation Time]
--,t.[text] AS [Query Text], qp.query_plan AS [Query Plan] -- uncomment out these columns if not copying results to Excel
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(plan_handle) AS t 
CROSS APPLY sys.dm_exec_query_plan(plan_handle) AS qp 
ORDER BY qs.total_worker_time DESC OPTION (RECOMPILE);
------


-- Helps you find the most expensive queries from a CPU perspective across the entire instance
-- Can also help track down parameter sniffing issues



-- Page Life Expectancy (PLE) value for each NUMA node in current instance  (Query 46) (PLE by NUMA Node)
SELECT @@SERVERNAME AS [Server Name], RTRIM([object_name]) AS [Object Name], instance_name, cntr_value AS [Page Life Expectancy]
FROM sys.dm_os_performance_counters WITH (NOLOCK)
WHERE [object_name] LIKE N'%Buffer Node%' -- Handles named instances
AND counter_name = N'Page life expectancy' OPTION (RECOMPILE);
------

-- PLE is a good measurement of internal memory pressure
-- Higher PLE is better. Watch the trend over time, not the absolute value
-- This will only return one row for non-NUMA systems

-- Page Life Expectancy isn�t what you think�
-- https://bit.ly/2EgynLa


-- Memory Grants Pending value for current instance  (Query 47) (Memory Grants Pending)
SELECT @@SERVERNAME AS [Server Name], RTRIM([object_name]) AS [Object Name], cntr_value AS [Memory Grants Pending]                                                                                                       
FROM sys.dm_os_performance_counters WITH (NOLOCK)
WHERE [object_name] LIKE N'%Memory Manager%' -- Handles named instances
AND counter_name = N'Memory Grants Pending' OPTION (RECOMPILE);
------

-- Run multiple times, and run periodically if you suspect you are under memory pressure
-- Memory Grants Pending above zero for a sustained period is a very strong indicator of internal memory pressure


-- Memory Clerk Usage for instance  (Query 48) (Memory Clerk Usage)
-- Look for high value for CACHESTORE_SQLCP (Ad-hoc query plans)
SELECT TOP(10) mc.[type] AS [Memory Clerk Type], 
       CAST((SUM(mc.pages_kb)/1024.0) AS DECIMAL (15,2)) AS [Memory Usage (MB)] 
FROM sys.dm_os_memory_clerks AS mc WITH (NOLOCK)
GROUP BY mc.[type]  
ORDER BY SUM(mc.pages_kb) DESC OPTION (RECOMPILE);
------

-- MEMORYCLERK_SQLBUFFERPOOL was new for SQL Server 2012. It should be your highest consumer of memory

-- CACHESTORE_SQLCP  SQL Plans         
-- These are cached SQL statements or batches that aren't in stored procedures, functions and triggers
-- Watch out for high values for CACHESTORE_SQLCP
-- Enabling 'optimize for ad hoc workloads' at the instance level can help reduce this
-- Running DBCC FREESYSTEMCACHE ('SQL Plans') periodically may be required to better control this

-- CACHESTORE_OBJCP  Object Plans      
-- These are compiled plans for stored procedures, functions and triggers



-- Find single-use, ad-hoc and prepared queries that are bloating the plan cache  (Query 49) (Ad hoc Queries)
SELECT TOP(50) DB_NAME(t.[dbid]) AS [Database Name], t.[text] AS [Query Text], 
cp.objtype AS [Object Type], cp.cacheobjtype AS [Cache Object Type],  
cp.size_in_bytes/1024 AS [Plan Size in KB]
FROM sys.dm_exec_cached_plans AS cp WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(plan_handle) AS t
WHERE cp.cacheobjtype = N'Compiled Plan' 
AND cp.objtype IN (N'Adhoc', N'Prepared') 
AND cp.usecounts = 1
ORDER BY cp.size_in_bytes DESC, DB_NAME(t.[dbid]) OPTION (RECOMPILE);
------

-- Gives you the text, type and size of single-use ad-hoc and prepared queries that waste space in the plan cache
-- Enabling 'optimize for ad hoc workloads' for the instance can help (SQL Server 2008 and above only)
-- Running DBCC FREESYSTEMCACHE ('SQL Plans') periodically may be required to better control this
-- Enabling forced parameterization for the database can help, but test first!

-- Plan cache, adhoc workloads and clearing the single-use plan cache bloat
-- https://bit.ly/2EfYOkl


-- Get top total logical reads queries for entire instance (Query 50) (Top Logical Reads Queries)
SELECT TOP(50) DB_NAME(t.[dbid]) AS [Database Name],
REPLACE(REPLACE(LEFT(t.[text], 255), CHAR(10),''), CHAR(13),'') AS [Short Query Text], 
qs.total_logical_reads AS [Total Logical Reads],
qs.min_logical_reads AS [Min Logical Reads],
qs.total_logical_reads/qs.execution_count AS [Avg Logical Reads],
qs.max_logical_reads AS [Max Logical Reads],   
qs.min_worker_time AS [Min Worker Time],
qs.total_worker_time/qs.execution_count AS [Avg Worker Time], 
qs.max_worker_time AS [Max Worker Time], 
qs.min_elapsed_time AS [Min Elapsed Time], 
qs.total_elapsed_time/qs.execution_count AS [Avg Elapsed Time], 
qs.max_elapsed_time AS [Max Elapsed Time],
qs.execution_count AS [Execution Count], 
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index],
qs.creation_time AS [Creation Time]
--,t.[text] AS [Complete Query Text], qp.query_plan AS [Query Plan] -- uncomment out these columns if not copying results to Excel
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(plan_handle) AS t 
CROSS APPLY sys.dm_exec_query_plan(plan_handle) AS qp 
ORDER BY qs.total_logical_reads DESC OPTION (RECOMPILE);
------


-- Helps you find the most expensive queries from a memory perspective across the entire instance
-- Can also help track down parameter sniffing issues


-- Get top average elapsed time queries for entire instance (Query 51) (Top Avg Elapsed Time Queries)
SELECT TOP(50) DB_NAME(t.[dbid]) AS [Database Name], 
REPLACE(REPLACE(LEFT(t.[text], 255), CHAR(10),''), CHAR(13),'') AS [Short Query Text],  
qs.total_elapsed_time/qs.execution_count AS [Avg Elapsed Time],
qs.min_elapsed_time, qs.max_elapsed_time, qs.last_elapsed_time,
qs.execution_count AS [Execution Count],  
qs.total_logical_reads/qs.execution_count AS [Avg Logical Reads], 
qs.total_physical_reads/qs.execution_count AS [Avg Physical Reads], 
qs.total_worker_time/qs.execution_count AS [Avg Worker Time],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index],
qs.creation_time AS [Creation Time]
--,t.[text] AS [Complete Query Text], qp.query_plan AS [Query Plan] -- uncomment out these columns if not copying results to Excel
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(plan_handle) AS t 
CROSS APPLY sys.dm_exec_query_plan(plan_handle) AS qp 
ORDER BY qs.total_elapsed_time/qs.execution_count DESC OPTION (RECOMPILE);
------

-- Helps you find the highest average elapsed time queries across the entire instance
-- Can also help track down parameter sniffing issues




-- Database specific queries *****************************************************************

-- **** Please switch to a user database that you are interested in! *****
--USE YourDatabaseName; -- make sure to change to an actual database on your instance, not the master system database
--GO

-- Individual File Sizes and space available for current database  (Query 52) (File Sizes and Space)
SELECT f.name AS [File Name] , f.physical_name AS [Physical Name], 
CAST((f.size/128.0) AS DECIMAL(15,2)) AS [Total Size in MB],
CAST(f.size/128.0 - CAST(FILEPROPERTY(f.name, 'SpaceUsed') AS int)/128.0 AS DECIMAL(15,2)) 
AS [Available Space In MB], f.[file_id], fg.name AS [Filegroup Name],
f.is_percent_growth, f.growth, fg.is_default, fg.is_read_only
FROM sys.database_files AS f WITH (NOLOCK) 
LEFT OUTER JOIN sys.filegroups AS fg WITH (NOLOCK)
ON f.data_space_id = fg.data_space_id
ORDER BY f.[file_id] OPTION (RECOMPILE);
------

-- Look at how large and how full the files are and where they are located
-- Make sure the transaction log is not full!!


-- Log space usage for current database  (Query 53) (Log Space Usage)
SELECT DB_NAME(lsu.database_id) AS [Database Name], db.recovery_model_desc AS [Recovery Model],
		CAST(lsu.total_log_size_in_bytes/1048576.0 AS DECIMAL(10, 2)) AS [Total Log Space (MB)],
		CAST(lsu.used_log_space_in_bytes/1048576.0 AS DECIMAL(10, 2)) AS [Used Log Space (MB)], 
		CAST(lsu.used_log_space_in_percent AS DECIMAL(10, 2)) AS [Used Log Space %],
		CAST(lsu.log_space_in_bytes_since_last_backup/1048576.0 AS DECIMAL(10, 2)) AS [Used Log Space Since Last Backup (MB)],
		db.log_reuse_wait_desc		 
FROM sys.dm_db_log_space_usage AS lsu WITH (NOLOCK)
INNER JOIN sys.databases AS db WITH (NOLOCK)
ON lsu.database_id = db.database_id
OPTION (RECOMPILE);
------

-- Look at log file size and usage, along with the log reuse wait description for the current database


-- I/O Statistics by file for the current database  (Query 54) (IO Stats By File)
SELECT DB_NAME(DB_ID()) AS [Database Name], df.name AS [Logical Name], vfs.[file_id], df.type_desc,
df.physical_name AS [Physical Name], CAST(vfs.size_on_disk_bytes/1048576.0 AS DECIMAL(10, 2)) AS [Size on Disk (MB)],
vfs.num_of_reads, vfs.num_of_writes, vfs.io_stall_read_ms, vfs.io_stall_write_ms,
CAST(100. * vfs.io_stall_read_ms/(vfs.io_stall_read_ms + vfs.io_stall_write_ms) AS DECIMAL(10,1)) AS [IO Stall Reads Pct],
CAST(100. * vfs.io_stall_write_ms/(vfs.io_stall_write_ms + vfs.io_stall_read_ms) AS DECIMAL(10,1)) AS [IO Stall Writes Pct],
(vfs.num_of_reads + vfs.num_of_writes) AS [Writes + Reads], 
CAST(vfs.num_of_bytes_read/1048576.0 AS DECIMAL(10, 2)) AS [MB Read], 
CAST(vfs.num_of_bytes_written/1048576.0 AS DECIMAL(10, 2)) AS [MB Written],
CAST(100. * vfs.num_of_reads/(vfs.num_of_reads + vfs.num_of_writes) AS DECIMAL(10,1)) AS [# Reads Pct],
CAST(100. * vfs.num_of_writes/(vfs.num_of_reads + vfs.num_of_writes) AS DECIMAL(10,1)) AS [# Write Pct],
CAST(100. * vfs.num_of_bytes_read/(vfs.num_of_bytes_read + vfs.num_of_bytes_written) AS DECIMAL(10,1)) AS [Read Bytes Pct],
CAST(100. * vfs.num_of_bytes_written/(vfs.num_of_bytes_read + vfs.num_of_bytes_written) AS DECIMAL(10,1)) AS [Written Bytes Pct]
FROM sys.dm_io_virtual_file_stats(DB_ID(), NULL) AS vfs
INNER JOIN sys.database_files AS df WITH (NOLOCK)
ON vfs.[file_id]= df.[file_id] OPTION (RECOMPILE);
------

-- This helps you characterize your workload better from an I/O perspective for this database
-- It helps you determine whether you has an OLTP or DW/DSS type of workload



-- Get most frequently executed queries for this database (Query 55) (Query Execution Counts)
SELECT TOP(50) LEFT(t.[text], 50) AS [Short Query Text], qs.execution_count AS [Execution Count],
qs.total_logical_reads AS [Total Logical Reads],
qs.total_logical_reads/qs.execution_count AS [Avg Logical Reads],
qs.total_worker_time AS [Total Worker Time],
qs.total_worker_time/qs.execution_count AS [Avg Worker Time], 
qs.total_elapsed_time AS [Total Elapsed Time],
qs.total_elapsed_time/qs.execution_count AS [Avg Elapsed Time],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index], 
qs.creation_time AS [Creation Time]
--,t.[text] AS [Complete Query Text], qp.query_plan AS [Query Plan] -- uncomment out these columns if not copying results to Excel
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(plan_handle) AS t 
CROSS APPLY sys.dm_exec_query_plan(plan_handle) AS qp 
WHERE t.dbid = DB_ID()
ORDER BY qs.execution_count DESC OPTION (RECOMPILE);
------


-- Queries 54 through 59 are the "Bad Man List" for stored procedures

-- Top Cached SPs By Execution Count (Query 56) (SP Execution Counts)
SELECT TOP(100) p.name AS [SP Name], qs.execution_count AS [Execution Count],
ISNULL(qs.execution_count/DATEDIFF(Minute, qs.cached_time, GETDATE()), 0) AS [Calls/Minute],
qs.total_elapsed_time/qs.execution_count AS [Avg Elapsed Time],
qs.total_worker_time/qs.execution_count AS [Avg Worker Time],    
qs.total_logical_reads/qs.execution_count AS [Avg Logical Reads],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index],
FORMAT(qs.last_execution_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Last Execution Time], 
FORMAT(qs.cached_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Plan Cached Time]
-- ,qp.query_plan AS [Query Plan] -- Uncomment if you want the Query Plan
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
CROSS APPLY sys.dm_exec_query_plan(qs.plan_handle) AS qp
WHERE qs.database_id = DB_ID()
AND DATEDIFF(Minute, qs.cached_time, GETDATE()) > 0
ORDER BY qs.execution_count DESC OPTION (RECOMPILE);
------

-- Tells you which cached stored procedures are called the most often
-- This helps you characterize and baseline your workload


-- Top Cached SPs By Avg Elapsed Time (Query 57) (SP Avg Elapsed Time)
SELECT TOP(25) p.name AS [SP Name], qs.min_elapsed_time, qs.total_elapsed_time/qs.execution_count AS [avg_elapsed_time], 
qs.max_elapsed_time, qs.last_elapsed_time, qs.total_elapsed_time, qs.execution_count, 
ISNULL(qs.execution_count/DATEDIFF(Minute, qs.cached_time, GETDATE()), 0) AS [Calls/Minute], 
qs.total_worker_time/qs.execution_count AS [AvgWorkerTime], 
qs.total_worker_time AS [TotalWorkerTime],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index],
FORMAT(qs.last_execution_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Last Execution Time], 
FORMAT(qs.cached_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Plan Cached Time]
-- ,qp.query_plan AS [Query Plan] -- Uncomment if you want the Query Plan
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
CROSS APPLY sys.dm_exec_query_plan(qs.plan_handle) AS qp
WHERE qs.database_id = DB_ID()
AND DATEDIFF(Minute, qs.cached_time, GETDATE()) > 0
ORDER BY avg_elapsed_time DESC OPTION (RECOMPILE);
------

-- This helps you find high average elapsed time cached stored procedures that
-- may be easy to optimize with standard query tuning techniques



-- Top Cached SPs By Total Worker time. Worker time relates to CPU cost  (Query 58) (SP Worker Time)
SELECT TOP(25) p.name AS [SP Name], qs.total_worker_time AS [TotalWorkerTime], 
qs.total_worker_time/qs.execution_count AS [AvgWorkerTime], qs.execution_count, 
ISNULL(qs.execution_count/DATEDIFF(Minute, qs.cached_time, GETDATE()), 0) AS [Calls/Minute],
qs.total_elapsed_time, qs.total_elapsed_time/qs.execution_count AS [avg_elapsed_time],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index],
FORMAT(qs.last_execution_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Last Execution Time], 
FORMAT(qs.cached_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Plan Cached Time]
-- ,qp.query_plan AS [Query Plan] -- Uncomment if you want the Query Plan
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
CROSS APPLY sys.dm_exec_query_plan(qs.plan_handle) AS qp
WHERE qs.database_id = DB_ID()
AND DATEDIFF(Minute, qs.cached_time, GETDATE()) > 0
ORDER BY qs.total_worker_time DESC OPTION (RECOMPILE);
------

-- This helps you find the most expensive cached stored procedures from a CPU perspective
-- You should look at this if you see signs of CPU pressure


-- Top Cached SPs By Total Logical Reads. Logical reads relate to memory pressure  (Query 59) (SP Logical Reads)
SELECT TOP(25) p.name AS [SP Name], qs.total_logical_reads AS [TotalLogicalReads], 
qs.total_logical_reads/qs.execution_count AS [AvgLogicalReads],qs.execution_count, 
ISNULL(qs.execution_count/DATEDIFF(Minute, qs.cached_time, GETDATE()), 0) AS [Calls/Minute], 
qs.total_elapsed_time, qs.total_elapsed_time/qs.execution_count AS [avg_elapsed_time],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index], 
FORMAT(qs.last_execution_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Last Execution Time], 
FORMAT(qs.cached_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Plan Cached Time]
-- ,qp.query_plan AS [Query Plan] -- Uncomment if you want the Query Plan
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
CROSS APPLY sys.dm_exec_query_plan(qs.plan_handle) AS qp
WHERE qs.database_id = DB_ID()
AND DATEDIFF(Minute, qs.cached_time, GETDATE()) > 0
ORDER BY qs.total_logical_reads DESC OPTION (RECOMPILE);
------

-- This helps you find the most expensive cached stored procedures from a memory perspective
-- You should look at this if you see signs of memory pressure


-- Top Cached SPs By Total Physical Reads. Physical reads relate to disk read I/O pressure  (Query 60) (SP Physical Reads)
SELECT TOP(25) p.name AS [SP Name],qs.total_physical_reads AS [TotalPhysicalReads], 
qs.total_physical_reads/qs.execution_count AS [AvgPhysicalReads], qs.execution_count, 
qs.total_logical_reads,qs.total_elapsed_time, qs.total_elapsed_time/qs.execution_count AS [avg_elapsed_time],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index],
FORMAT(qs.last_execution_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Last Execution Time], 
FORMAT(qs.cached_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Plan Cached Time]
-- ,qp.query_plan AS [Query Plan] -- Uncomment if you want the Query Plan 
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
CROSS APPLY sys.dm_exec_query_plan(qs.plan_handle) AS qp
WHERE qs.database_id = DB_ID()
AND qs.total_physical_reads > 0
ORDER BY qs.total_physical_reads DESC, qs.total_logical_reads DESC OPTION (RECOMPILE);
------

-- This helps you find the most expensive cached stored procedures from a read I/O perspective
-- You should look at this if you see signs of I/O pressure or of memory pressure


       
-- Top Cached SPs By Total Logical Writes (Query 61) (SP Logical Writes)
-- Logical writes relate to both memory and disk I/O pressure 
SELECT TOP(25) p.name AS [SP Name], qs.total_logical_writes AS [TotalLogicalWrites], 
qs.total_logical_writes/qs.execution_count AS [AvgLogicalWrites], qs.execution_count,
ISNULL(qs.execution_count/DATEDIFF(Minute, qs.cached_time, GETDATE()), 0) AS [Calls/Minute],
qs.total_elapsed_time, qs.total_elapsed_time/qs.execution_count AS [avg_elapsed_time],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index], 
FORMAT(qs.last_execution_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Last Execution Time], 
FORMAT(qs.cached_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Plan Cached Time]
-- ,qp.query_plan AS [Query Plan] -- Uncomment if you want the Query Plan 
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
CROSS APPLY sys.dm_exec_query_plan(qs.plan_handle) AS qp
WHERE qs.database_id = DB_ID()
AND qs.total_logical_writes > 0
AND DATEDIFF(Minute, qs.cached_time, GETDATE()) > 0
ORDER BY qs.total_logical_writes DESC OPTION (RECOMPILE);
------

-- This helps you find the most expensive cached stored procedures from a write I/O perspective
-- You should look at this if you see signs of I/O pressure or of memory pressure


-- Lists the top statements by average input/output usage for the current database  (Query 62) (Top IO Statements)
SELECT TOP(50) OBJECT_NAME(qt.objectid, dbid) AS [SP Name],
(qs.total_logical_reads + qs.total_logical_writes) /qs.execution_count AS [Avg IO], qs.execution_count AS [Execution Count],
SUBSTRING(qt.[text],qs.statement_start_offset/2, 
	(CASE 
		WHEN qs.statement_end_offset = -1 
	 THEN LEN(CONVERT(nvarchar(max), qt.[text])) * 2 
		ELSE qs.statement_end_offset 
	 END - qs.statement_start_offset)/2) AS [Query Text]	
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(qs.sql_handle) AS qt
WHERE qt.[dbid] = DB_ID()
ORDER BY [Avg IO] DESC OPTION (RECOMPILE);
------

-- Helps you find the most expensive statements for I/O by SP



-- Possible Bad NC Indexes (writes > reads)  (Query 63) (Bad NC Indexes)
SELECT OBJECT_NAME(s.[object_id]) AS [Table Name], i.name AS [Index Name], i.index_id, 
i.is_disabled, i.is_hypothetical, i.has_filter, i.fill_factor,
s.user_updates AS [Total Writes], s.user_seeks + s.user_scans + s.user_lookups AS [Total Reads],
s.user_updates - (s.user_seeks + s.user_scans + s.user_lookups) AS [Difference]
FROM sys.dm_db_index_usage_stats AS s WITH (NOLOCK)
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON s.[object_id] = i.[object_id]
AND i.index_id = s.index_id
WHERE OBJECTPROPERTY(s.[object_id],'IsUserTable') = 1
AND s.database_id = DB_ID()
AND s.user_updates > (s.user_seeks + s.user_scans + s.user_lookups)
AND i.index_id > 1 AND i.[type_desc] = N'NONCLUSTERED'
AND i.is_primary_key = 0 AND i.is_unique_constraint = 0 AND i.is_unique = 0
ORDER BY [Difference] DESC, [Total Writes] DESC, [Total Reads] ASC OPTION (RECOMPILE);
------

-- Look for indexes with high numbers of writes and zero or very low numbers of reads
-- Consider your complete workload, and how long your instance has been running
-- Investigate further before dropping an index!


-- Missing Indexes for current database by Index Advantage  (Query 64) (Missing Indexes)
SELECT CONVERT(decimal(18,2), user_seeks * avg_total_user_cost * (avg_user_impact * 0.01)) AS [index_advantage], 
migs.last_user_seek, mid.[statement] AS [Database.Schema.Table],
COUNT(1) OVER(PARTITION BY mid.[statement]) AS [missing_indexes_for_table],
COUNT(1) OVER(PARTITION BY mid.[statement], equality_columns) AS [similar_missing_indexes_for_table],
mid.equality_columns, mid.inequality_columns, mid.included_columns,
migs.unique_compiles, migs.user_seeks, 
CONVERT(decimal(18,2), migs.avg_total_user_cost) AS [avg_total_user_cost], migs.avg_user_impact,
OBJECT_NAME(mid.[object_id]) AS [Table Name], p.rows AS [Table Rows]
FROM sys.dm_db_missing_index_group_stats AS migs WITH (NOLOCK)
INNER JOIN sys.dm_db_missing_index_groups AS mig WITH (NOLOCK)
ON migs.group_handle = mig.index_group_handle
INNER JOIN sys.dm_db_missing_index_details AS mid WITH (NOLOCK)
ON mig.index_handle = mid.index_handle
INNER JOIN sys.partitions AS p WITH (NOLOCK)
ON p.[object_id] = mid.[object_id]
WHERE mid.database_id = DB_ID()
AND p.index_id < 2 
ORDER BY index_advantage DESC OPTION (RECOMPILE);
------

-- Look at index advantage, last user seek time, number of user seeks to help determine source and importance
-- SQL Server is overly eager to add included columns, so beware
-- Do not just blindly add indexes that show up from this query!!!


-- Find missing index warnings for cached plans in the current database  (Query 65) (Missing Index Warnings)
-- Note: This query could take some time on a busy instance
SELECT TOP(25) OBJECT_NAME(objectid) AS [ObjectName], 
               cp.objtype, cp.usecounts, cp.size_in_bytes, query_plan
FROM sys.dm_exec_cached_plans AS cp WITH (NOLOCK)
CROSS APPLY sys.dm_exec_query_plan(cp.plan_handle) AS qp
WHERE CAST(query_plan AS NVARCHAR(MAX)) LIKE N'%MissingIndex%'
AND dbid = DB_ID()
ORDER BY cp.usecounts DESC OPTION (RECOMPILE);
------

-- Helps you connect missing indexes to specific stored procedures or queries
-- This can help you decide whether to add them or not


-- Breaks down buffers used by current database by object (table, index) in the buffer cache  (Query 66) (Buffer Usage)
-- Note: This query could take some time on a busy instance
SELECT OBJECT_NAME(p.[object_id]) AS [Object Name], p.index_id, 
CAST(COUNT(*)/128.0 AS DECIMAL(10, 2)) AS [Buffer size(MB)],  
COUNT(*) AS [BufferCount], p.[Rows] AS [Row Count],
p.data_compression_desc AS [Compression Type]
FROM sys.allocation_units AS a WITH (NOLOCK)
INNER JOIN sys.dm_os_buffer_descriptors AS b WITH (NOLOCK)
ON a.allocation_unit_id = b.allocation_unit_id
INNER JOIN sys.partitions AS p WITH (NOLOCK)
ON a.container_id = p.hobt_id
WHERE b.database_id = CONVERT(int, DB_ID())
AND p.[object_id] > 100
AND OBJECT_NAME(p.[object_id]) NOT LIKE N'plan_%'
AND OBJECT_NAME(p.[object_id]) NOT LIKE N'sys%'
AND OBJECT_NAME(p.[object_id]) NOT LIKE N'xml_index_nodes%'
GROUP BY p.[object_id], p.index_id, p.data_compression_desc, p.[Rows]
ORDER BY [BufferCount] DESC OPTION (RECOMPILE);
------

-- Tells you what tables and indexes are using the most memory in the buffer cache
-- It can help identify possible candidates for data compression


-- Get Table names, row counts, and compression status for clustered index or heap  (Query 67) (Table Sizes)
SELECT OBJECT_NAME(object_id) AS [ObjectName], 
SUM(Rows) AS [RowCount], data_compression_desc AS [CompressionType]
FROM sys.partitions WITH (NOLOCK)
WHERE index_id < 2 --ignore the partitions from the non-clustered index if any
AND OBJECT_NAME(object_id) NOT LIKE N'sys%'
AND OBJECT_NAME(object_id) NOT LIKE N'queue_%' 
AND OBJECT_NAME(object_id) NOT LIKE N'filestream_tombstone%' 
AND OBJECT_NAME(object_id) NOT LIKE N'fulltext%'
AND OBJECT_NAME(object_id) NOT LIKE N'ifts_comp_fragment%'
AND OBJECT_NAME(object_id) NOT LIKE N'filetable_updates%'
AND OBJECT_NAME(object_id) NOT LIKE N'xml_index_nodes%'
AND OBJECT_NAME(object_id) NOT LIKE N'sqlagent_job%'
AND OBJECT_NAME(object_id) NOT LIKE N'plan_persist%'
AND OBJECT_NAME(object_id) NOT LIKE N'persistent_version_store%'
AND OBJECT_NAME(object_id) NOT LIKE N'persistent_version_store_long_term%'
GROUP BY object_id, data_compression_desc
ORDER BY SUM(Rows) DESC OPTION (RECOMPILE);
------

-- Gives you an idea of table sizes, and possible data compression opportunities



-- Get some key table properties (Query 68) (Table Properties)
SELECT OBJECT_NAME(t.[object_id]) AS [ObjectName], p.[rows] AS [Table Rows], p.index_id, 
       p.data_compression_desc AS [Index Data Compression],
       t.create_date, t.lock_on_bulk_load, t.is_replicated, t.has_replication_filter, 
       t.is_tracked_by_cdc, t.lock_escalation_desc, t.is_filetable, 
	   t.is_memory_optimized, t.durability_desc  -- new for SQL Server 2014
FROM sys.tables AS t WITH (NOLOCK)
INNER JOIN sys.partitions AS p WITH (NOLOCK)
ON t.[object_id] = p.[object_id]
WHERE OBJECT_NAME(t.[object_id]) NOT LIKE N'sys%'
ORDER BY OBJECT_NAME(t.[object_id]), p.index_id OPTION (RECOMPILE);
------

-- Gives you some good information about your tables
-- Is Memory optimized and durability description are Hekaton-related properties that were new in SQL Server 2014



-- When were Statistics last updated on all indexes?  (Query 69) (Statistics Update)
SELECT SCHEMA_NAME(o.Schema_ID) + N'.' + o.[NAME] AS [Object Name], o.[type_desc] AS [Object Type],
      i.[name] AS [Index Name], STATS_DATE(i.[object_id], i.index_id) AS [Statistics Date], 
      s.auto_created, s.no_recompute, s.user_created, s.is_incremental, s.is_temporary,
	  st.row_count, st.used_page_count
FROM sys.objects AS o WITH (NOLOCK)
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON o.[object_id] = i.[object_id]
INNER JOIN sys.stats AS s WITH (NOLOCK)
ON i.[object_id] = s.[object_id] 
AND i.index_id = s.stats_id
INNER JOIN sys.dm_db_partition_stats AS st WITH (NOLOCK)
ON o.[object_id] = st.[object_id]
AND i.[index_id] = st.[index_id]
WHERE o.[type] IN ('U', 'V')
AND st.row_count > 0
ORDER BY STATS_DATE(i.[object_id], i.index_id) DESC OPTION (RECOMPILE);
------  

-- Helps discover possible problems with out-of-date statistics
-- Also gives you an idea which indexes are the most active

-- sys.stats (Transact-SQL)
-- https://bit.ly/2GyAxrn

-- UPDATEs to Statistics (Erin Stellato)
-- https://bit.ly/2vhrYQy



-- Look at most frequently modified indexes and statistics (Query 70) (Volatile Indexes)
SELECT o.[name] AS [Object Name], o.[object_id], o.[type_desc], s.[name] AS [Statistics Name], 
       s.stats_id, s.no_recompute, s.auto_created, s.is_incremental, s.is_temporary,
	   sp.modification_counter, sp.[rows], sp.rows_sampled, sp.last_updated
FROM sys.objects AS o WITH (NOLOCK)
INNER JOIN sys.stats AS s WITH (NOLOCK)
ON s.object_id = o.object_id
CROSS APPLY sys.dm_db_stats_properties(s.object_id, s.stats_id) AS sp
WHERE o.[type_desc] NOT IN (N'SYSTEM_TABLE', N'INTERNAL_TABLE')
AND sp.modification_counter > 0
ORDER BY sp.modification_counter DESC, o.name OPTION (RECOMPILE);
------

-- This helps you understand your workload and make better decisions about 
-- things like data compression and adding new indexes to a table



-- Get fragmentation info for all indexes above a certain size in the current database  (Query 71) (Index Fragmentation)
-- Note: This query could take some time on a very large database
SELECT DB_NAME(ps.database_id) AS [Database Name], SCHEMA_NAME(o.[schema_id]) AS [Schema Name],
OBJECT_NAME(ps.OBJECT_ID) AS [Object Name], i.[name] AS [Index Name], ps.index_id, 
ps.index_type_desc, ps.avg_fragmentation_in_percent, 
ps.fragment_count, ps.page_count, i.fill_factor, i.has_filter, 
i.filter_definition, i.[allow_page_locks]
FROM sys.dm_db_index_physical_stats(DB_ID(),NULL, NULL, NULL , N'LIMITED') AS ps
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON ps.[object_id] = i.[object_id] 
AND ps.index_id = i.index_id
INNER JOIN sys.objects AS o WITH (NOLOCK)
ON i.[object_id] = o.[object_id]
WHERE ps.database_id = DB_ID()
AND ps.page_count > 2500
ORDER BY ps.avg_fragmentation_in_percent DESC OPTION (RECOMPILE);
------

-- Helps determine whether you have framentation in your relational indexes
-- and how effective your index maintenance strategy is


--- Index Read/Write stats (all tables in current DB) ordered by Reads  (Query 72) (Overall Index Usage - Reads)
SELECT OBJECT_NAME(i.[object_id]) AS [ObjectName], i.[name] AS [IndexName], i.index_id, 
       s.user_seeks, s.user_scans, s.user_lookups,
	   s.user_seeks + s.user_scans + s.user_lookups AS [Total Reads], 
	   s.user_updates AS [Writes],  
	   i.[type_desc] AS [Index Type], i.fill_factor AS [Fill Factor], i.has_filter, i.filter_definition, 
	   s.last_user_scan, s.last_user_lookup, s.last_user_seek
FROM sys.indexes AS i WITH (NOLOCK)
LEFT OUTER JOIN sys.dm_db_index_usage_stats AS s WITH (NOLOCK)
ON i.[object_id] = s.[object_id]
AND i.index_id = s.index_id
AND s.database_id = DB_ID()
WHERE OBJECTPROPERTY(i.[object_id],'IsUserTable') = 1
ORDER BY s.user_seeks + s.user_scans + s.user_lookups DESC OPTION (RECOMPILE); -- Order by reads
------

-- Show which indexes in the current database are most active for Reads


--- Index Read/Write stats (all tables in current DB) ordered by Writes  (Query 73) (Overall Index Usage - Writes)
SELECT OBJECT_NAME(i.[object_id]) AS [ObjectName], i.[name] AS [IndexName], i.index_id,
	   s.user_updates AS [Writes], s.user_seeks + s.user_scans + s.user_lookups AS [Total Reads], 
	   i.[type_desc] AS [Index Type], i.fill_factor AS [Fill Factor], i.has_filter, i.filter_definition,
	   s.last_system_update, s.last_user_update
FROM sys.indexes AS i WITH (NOLOCK)
LEFT OUTER JOIN sys.dm_db_index_usage_stats AS s WITH (NOLOCK)
ON i.[object_id] = s.[object_id]
AND i.index_id = s.index_id
AND s.database_id = DB_ID()
WHERE OBJECTPROPERTY(i.[object_id],'IsUserTable') = 1
ORDER BY s.user_updates DESC OPTION (RECOMPILE);						 -- Order by writes
------

-- Show which indexes in the current database are most active for Writes


-- Get in-memory OLTP index usage (Query 74) (XTP Index Usage)
SELECT OBJECT_NAME(i.[object_id]) AS [Object Name], i.index_id, i.[name] AS [Index Name],
       i.[type_desc], xis.scans_started, xis.scans_retries, 
	   xis.rows_touched, xis.rows_returned
FROM sys.dm_db_xtp_index_stats AS xis WITH (NOLOCK)
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON i.[object_id] = xis.[object_id] 
AND i.index_id = xis.index_id 
ORDER BY OBJECT_NAME(i.[object_id]) OPTION (RECOMPILE);
------

-- This gives you some index usage statistics for in-memory OLTP
-- Returns no data if you are not using in-memory OLTP

-- Guidelines for Using Indexes on Memory-Optimized Tables
-- https://bit.ly/2GCP8lF


-- Get lock waits for current database (Query 75) (Lock Waits)
SELECT o.name AS [table_name], i.name AS [index_name], ios.index_id, ios.partition_number,
		SUM(ios.row_lock_wait_count) AS [total_row_lock_waits], 
		SUM(ios.row_lock_wait_in_ms) AS [total_row_lock_wait_in_ms],
		SUM(ios.page_lock_wait_count) AS [total_page_lock_waits],
		SUM(ios.page_lock_wait_in_ms) AS [total_page_lock_wait_in_ms],
		SUM(ios.page_lock_wait_in_ms)+ SUM(row_lock_wait_in_ms) AS [total_lock_wait_in_ms]
FROM sys.dm_db_index_operational_stats(DB_ID(), NULL, NULL, NULL) AS ios
INNER JOIN sys.objects AS o WITH (NOLOCK)
ON ios.[object_id] = o.[object_id]
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON ios.[object_id] = i.[object_id] 
AND ios.index_id = i.index_id
WHERE o.[object_id] > 100
GROUP BY o.name, i.name, ios.index_id, ios.partition_number
HAVING SUM(ios.page_lock_wait_in_ms)+ SUM(row_lock_wait_in_ms) > 0
ORDER BY total_lock_wait_in_ms DESC OPTION (RECOMPILE);
------

-- This query is helpful for troubleshooting blocking and deadlocking issues


-- Get input buffer information for the current database (Query 76) (Input Buffer)
SELECT es.session_id, DB_NAME(es.database_id) AS [Database Name],
es.login_time, es.cpu_time, es.logical_reads,
es.[status], ib.event_info AS [Input Buffer]
FROM sys.dm_exec_sessions AS es WITH (NOLOCK)
CROSS APPLY sys.dm_exec_input_buffer(es.session_id, NULL) AS ib
WHERE es.database_id = DB_ID()
AND es.session_id > 50
AND es.session_id <> @@SPID OPTION (RECOMPILE);

-- Gives you input buffer information from all non-system sessions for the current database
-- Replaces DBCC INPUTBUFFER
-- Requires SQL Server 2014 SP2 or later

-- New DMF for retrieving input buffer in SQL Server
-- https://bit.ly/2uHKMbz


-- Look at recent Full backups for the current database (Query 77) (Recent Full Backups)
SELECT TOP (30) bs.machine_name, bs.server_name, bs.database_name AS [Database Name], bs.recovery_model,
CONVERT (BIGINT, bs.backup_size / 1048576 ) AS [Uncompressed Backup Size (MB)],
CONVERT (BIGINT, bs.compressed_backup_size / 1048576 ) AS [Compressed Backup Size (MB)],
CONVERT (NUMERIC (20,2), (CONVERT (FLOAT, bs.backup_size) /
CONVERT (FLOAT, bs.compressed_backup_size))) AS [Compression Ratio], bs.has_backup_checksums, bs.is_copy_only, bs.encryptor_type,
DATEDIFF (SECOND, bs.backup_start_date, bs.backup_finish_date) AS [Backup Elapsed Time (sec)],
bs.backup_finish_date AS [Backup Finish Date], bmf.physical_device_name AS [Backup Location], bmf.physical_block_size
FROM msdb.dbo.backupset AS bs WITH (NOLOCK)
INNER JOIN msdb.dbo.backupmediafamily AS bmf WITH (NOLOCK)
ON bs.media_set_id = bmf.media_set_id  
WHERE bs.database_name = DB_NAME(DB_ID())
AND bs.[type] = 'D' -- Change to L if you want Log backups
ORDER BY bs.backup_finish_date DESC OPTION (RECOMPILE);
------

-- Are your backup sizes and times changing over time?
-- Are you using backup compression?
-- Are you using backup checksums?
-- Are you doing copy_only backups?
-- Are you doing encrypted backups?
-- Have you done any backup tuning with striped backups, or changing the parameters of the backup command?


-- These four Pluralsight Courses go into more detail about how to run these queries and interpret the results

-- SQL Server 2017: Diagnosing Configuration Issues with DMVs
-- https://bit.ly/2MSUDUL

-- SQL Server 2014 DMV Diagnostic Queries � Part 1 
-- https://bit.ly/2plxCer

-- SQL Server 2014 DMV Diagnostic Queries � Part 2
-- https://bit.ly/2IuJpzI

-- SQL Server 2014 DMV Diagnostic Queries � Part 3
-- https://bit.ly/2FIlCPb



-- Sign up for Microsoft Visual Studio Dev Essentials and get a free three month pass to Pluralsight

-- Microsoft Visual Studio Dev Essentials
-- http://bit.ly/1q6xbDL


-- Sign up for Microsoft Azure Essentials and get lots of free Azure usage credits, MCP exam voucher, three month Pluralsight subscription

-- Microsoft Azure Essentials
-- https://bit.ly/2JMWe8x


-- August 2017 blog series about upgrading and migrating to SQL Server 2016/2017
-- https://bit.ly/2ftKVrX

tools\dbatools\bin\smo\Microsoft.SqlServer.ConnectionInfoExtended.dll

md5: 9208D9667BAE268B63C09BF8E6C79FE4 | sha1: A3DA904733DE2F8161A1103F8061C4392D97BA6C | sha256: F0A1A6600895B521AFE9C17F545D851DB218BCCE93C76A3E96608115F4F4DEBC | sha512: DADDBD541CF0DE43E9D0BEDA524453EBEE533BDC30957E8F71C3D1F5CC76D0D3339061FB06C2FA9F9F92258E5E31FF13E6179F77FA30B1B984E1419E1FE589A7

tools\dbatools\bin\smo\Microsoft.SqlServer.Dac.dll

md5: 11CE124B92362C6DAF66E038515A2DF5 | sha1: E11F403F9A92ED69CB5D3ECFF464B9286D50587C | sha256: DF15554804BB08351DF170434E2E994475F6AA3F5B6A465CA30052A13F6EAF0A | sha512: 5036C4855CE72374BC688010D4A0E5F0A9F55F08B5B4D5421C8A53EB4CB7DB53AC42493AA79D7774682427FAFDC38A47D083E16D5973E49BC821EFB88BFDD424

tools\dbatools\bin\smo\Microsoft.SqlServer.Dac.Extensions.dll

md5: 2DD7BA70365204298B4A381D500F433C | sha1: AF2655A5220761227E33EF89583346C7FFD9CD72 | sha256: 2A7D545774CAD03C72F3E6E5B06B65F75A716052B0A2D36E48DA3124BF0B54FD | sha512: 490F1D96C33FAEA13F73109D6068C887D86B86E7BDEA002DCBA42AB2DE3C47E8E63ED1C345AF252163D72FC6FE7045635A1C64BA8B3ACB3A9C50E7FF63584817

tools\dbatools\bin\smo\Microsoft.SqlServer.Dac.Extensions.xml

<?xml version="1.0"?>
<doc>
    <assembly>
        <name>Microsoft.SqlServer.Dac.Extensions</name>
    </assembly>
    <members>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisModelValidationMode">
            <summary>
            Determines the validation performed on the model prior to code analysis.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisModelValidationMode.Full">
            <summary>
            The TSqlModel is fully validated prior to code analysis.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisModelValidationMode.None">
            <summary>
            No validation is performed on the TSqlModel prior to code analysis
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisResult">
            <summary>
            The results of Code Analysis against a particular model. Will include any
            <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblem"/>s found, in addition to any errors that occurred
            during analysis
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisResult.#ctor">
            <summary>
            Creates a <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisResult"/>
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisResult.GetAllErrors">
            <summary>
            Gets all errors, whether during initialization or during the analysis process. This
            does not include the <see cref="P:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisResult.Problems"/> found during analysis since these are
            returned separately.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisResult.SerializeResultsToXml(System.String)">
            <summary>
            Serializes the results in XML format to an output file.
            
            Only the problems discovered during analysis are output. No errors that occurred during
            the analysis process will be output.  
            </summary>
            <param name="outputFilename">
            The filename for the output file. 
            This should be a fully qualified path to the file, or if a relative file path is used
            then the resolved path will be relative to the location of the executable running for 
            your process.
            If a relative file path is used this w
            </param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisResult.SerializeResultsToXml(System.IO.Stream)">
            <summary>
            Serializes the results in XML format to an output stream. For backwards compatibility 
            
            Only the problems discovered during analysis are output. No errors that occurred during
            the analysis process will be output. 
            </summary>
            <param name="output">
            An output stream to write the XML results to. This must support write
            </param>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisResult.Problems">
            <summary>
            Any problems discovered by the rules run during code analysis
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisResult.AnalysisErrors">
            <summary>
            Errors and messages that occurred during analysis. 
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisResult.InitializationErrors">
            <summary>
            Gets errors that occurred during initialization of code analysis, rule lookup,
            and anything other than the analysis itself.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisResult.SuppressionErrors">
            <summary>
            Gets errors that occurred during calling of the message suppression routine.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisResult.AnalysisSucceeded">
            <summary>
            Was analysis completed successfully? Analysis may fail for a number of reasons, for instance
            if errors already exist in the model before processing.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService">
            <summary>
            A service that runs code analysis against a model and provides results to the caller.
             
            Note that this class is not thread-safe since multiple simulataneous calls to <see cref="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService.Analyze(Microsoft.SqlServer.Dac.Model.TSqlModel)"/> are
            not supported. However it is possible to call <see cref="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService.Cancel"/> from a thread while a separate thread is
            waiting on the <see cref="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService.Analyze(Microsoft.SqlServer.Dac.Model.TSqlModel)"/> method to complete.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService.GetRules">
            <summary>
            Gets the rules loaded by the service. The current state of these rules (enabled, disabled, rule problem severity)
            can be queried, as can information about the rule such as its ID and metadata. 
            </summary>
            <returns>
            list of <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.RuleDescriptor"/> objects representing rules discovered by the service, their metadata and status
            </returns>
            <remarks>To discover any problems loading rules, <see cref="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService.GetRuleLoadErrors"/> should be called</remarks>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService.GetRuleLoadErrors">
            <summary>
            Gets any errors that may have occurred during loading of the analysis rules.
            This causes rules to be loaded by the service.
            </summary>
            <returns>A list of errors that occurred during rule loading.</returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService.ApplyRuleSettings(Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisRuleSettings)">
            <summary>
            Applies the specified rule settings against the service's configuration. 
            </summary>
            <param name="settings"><see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisRuleSettings"/> describing which rules should be run</param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService.SetProblemSuppressor(System.Predicate{Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblemSuppressionContext})">
            <summary>
            Sets the problem suppression predicate to be applied when suppressing rules. 
            This is an optional feature that supports ignoring problems raised by a rule.
            The problem might be suppressed based on the element the problem was raised against, or the source 
            that the problem was found in. 
            </summary>
            <param name="shouldSuppressProblem">
            Predicate that should examine the suppression context and decide whether the problem needs to be suppressed
            </param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService.Cancel">
            <summary>
            Cancels execution of the analysis service
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService.Analyze(Microsoft.SqlServer.Dac.Model.TSqlModel)">
            <summary>
            Performs the analysis of the model. This will initialize all required resources, run analysis
            and report back results to the caller. 
            
            If the <see cref="P:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService.ResultsFile"/> and/or <see cref="P:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService.CodeAnalysisSucceededFile"/>
            are specified then these will be deleted at the start of the analysis, and new files created at the
            end of the analysis
            </summary>
            <param name="model">The <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/> to be analyzed</param>
            <returns>
            <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisResult"/> describing the problems found and any errors that
            occurred during processing
            </returns>
            <exception cref="T:System.ArgumentNullException">If the <paramref name="model"/> is null</exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService.Execute">
            <summary>
            Main entry point for task execution.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService.ExecuteValidateElementStatusStep">
            <summary>
            Ensure the model builds successfully - otherwise there is no point in continuing analysis
            since for SCA it's assumed that the model is valid already.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService.ExecuteInitializeMessageSuppressionStep">
            <summary>
            Wrap whatever message suppression logic has been defined in a routine that will
            call into that code and catch any errors thrown by customer logic
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService.SuppressProblemCallback(Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblemSuppressionContext)">
            <summary>
            Check if the rule in context is suppressed. Handles exceptions thrown by the problem suppression code
            so that execution does not get stopped due to issues in external code
            </summary>
            <param name="context"></param>
            <returns>Return true if rule is suppressed for modelElement; false otherwise</returns>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService.ResultsFile">
            <summary>
            Optional path to a results file. If this is specified, the analysis service will save all results to
            an XML file at the end of analysis. If no file path is specified then this will not be done automatically,
            but <see cref="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisResult.SerializeResultsToXml(System.String)"/> can be used to output the results after
            analysis has completed.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService.CodeAnalysisSucceededFile">
            <summary>
            Optional path to a file that is created if analysis succeeds. This can be used to check whether analysis
            should be run or not - for instance if analyzing a dacpac, comparing the modification time for the dacpac versus
            the analysis success file can tell you whether the dacpac is more recent than the last analysis.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService.ValidationMode">
            <summary>
            Determines the validation performed on the model prior to code analysis. This can be used to bypass
            the requirement that a TSqlModel be valid prior to analysis by a code analysis rule.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService.CancellationToken">
            <summary>
            The <see cref="P:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService.CancellationToken"/> used to indicate whether execution should be canceled. 
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService.IsCanceled">
            <summary>
            Gets a value that indicates whether the analysis was canceled
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisServiceFactory">
            <summary>
            Factory class that supports creation of <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService"/> objects.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisServiceFactory.CreateAnalysisService(Microsoft.SqlServer.Dac.Model.TSqlModel)">
            <summary>
            Creates an analysis service with the standard properties and all rules turned on by default.
            
            This is a convenience method that takes the <see cref="P:Microsoft.SqlServer.Dac.Model.TSqlModel.Version"/> from the model
            and passes it to the <see cref="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisServiceFactory.CreateAnalysisService(Microsoft.SqlServer.Dac.Model.SqlServerVersion)"/>
            method.
            </summary>
            <param name="model">
            The <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/> that will be analyzed. The version of the model must be known at the
            time the service is created since only rules compatible with that <see cref="T:Microsoft.SqlServer.Dac.Model.SqlServerVersion"/>
            will be loaded and run.
            </param>
            <returns>
            A <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService"/> that can analyze the contents of the <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/>
            </returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisServiceFactory.CreateAnalysisService(Microsoft.SqlServer.Dac.Model.TSqlModel,Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisServiceSettings)">
            <summary>
            Creates an analysis service and configures it using the <paramref name="settings"/> passed to the method.
            
            The settings are a convenient way to set up the service in one step, but if you wish to
            specify some settings after creating the service this is possible via methods and properties on
            the <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService"/> itself.
            
            This is a convenience method that takes the <see cref="P:Microsoft.SqlServer.Dac.Model.TSqlModel.Version"/> from the model
            and passes it to the <see cref="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisServiceFactory.CreateAnalysisService(Microsoft.SqlServer.Dac.Model.SqlServerVersion)"/>
            method.
            </summary>
            <param name="model">
            The <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/> that will be analyzed. This must be known at the time the
            service is created since only rules compatible with the <see cref="T:Microsoft.SqlServer.Dac.Model.SqlServerVersion"/> for the model
            will be loaded and run.
            </param>
            <param name="settings">Settings object defining how to configure the service</param>
            <returns>A <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService"/> that can analyze the contents of the <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/></returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisServiceFactory.CreateAnalysisService(Microsoft.SqlServer.Dac.Model.SqlServerVersion)">
            <summary>
            Creates an analysis service with the standard properties and all rules turned on by default.
            
            </summary>
            <param name="version">
            The expected <see cref="T:Microsoft.SqlServer.Dac.Model.SqlServerVersion"/> of models to be analyzed. This should be known at the time the
            service is created since only rules compatible with this <see cref="T:Microsoft.SqlServer.Dac.Model.SqlServerVersion"/> 
            will be loaded and run. 
            </param>
            <returns>
            A <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService"/> that can analyze the contents of the <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/>
            </returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisServiceFactory.CreateAnalysisService(Microsoft.SqlServer.Dac.Model.SqlServerVersion,Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisServiceSettings)">
            <summary>
            Creates an analysis service and configures it using the <paramref name="settings"/> passed to the method.
            
            The settings are a convenient way to set up the service in one step, but if you wish to
            specify some settings after creating the service this is possible via methods and properties on
            the <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService"/> itself.
            </summary>
            <param name="version">
            The expected <see cref="T:Microsoft.SqlServer.Dac.Model.SqlServerVersion"/> of models to be analyzed. This must be known at the time the
            service is created since only rules compatible with this <see cref="T:Microsoft.SqlServer.Dac.Model.SqlServerVersion"/> 
            will be loaded and run. 
            </param>
            <param name="settings">Settings object defining how to configure the service</param>
            <returns>A <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService"/> that can analyze the contents of the <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/></returns>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisServiceSettings">
            <summary>
            Defines the optional configuration settings for a <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService"/>. This can determine which
            rules are run, how to suppress certain problems, and where to save results to.
            
            These settings can also be set on the <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService"/> after it has been created, but are included
            here to make construction more convenient.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisServiceSettings.#ctor">
            <summary>
            Creates a new <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisServiceSettings"/> object.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisServiceSettings.RuleSettings">
            <summary>
            Optional rule settings define what rules should be run during analysis and the severity of the problems created. 
            If no <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisRuleSettings"/> are specified the default behavior is to run all discovered rules.
            
            This property is applied using <see cref="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService.ApplyRuleSettings(Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisRuleSettings)"/>. 
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisServiceSettings.ShouldSuppressProblem">
            <summary>
            An optional predicate that can be used to suppress problems raised by rules during analysis.
            See <see cref="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService.SetProblemSuppressor(System.Predicate{Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblemSuppressionContext})"/> for more information.
            
            This property is applied using <see cref="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService.SetProblemSuppressor(System.Predicate{Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblemSuppressionContext})"/>. 
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisServiceSettings.ResultsFile">
            <summary>
            Optional path to a results file. If this is specified, the analysis service will save all results to
            an XML file at the end of analysis. If no file path is specified then this will not be done automatically,
            but <see cref="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisResult.SerializeResultsToXml(System.String)"/> can be used to output the results after
            analysis has completed.
            
            This property directly maps to <see cref="P:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService.ResultsFile"/>.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisServiceSettings.CodeAnalysisSucceededFile">
            <summary>
            Optional path to a file that is created if analysis succeeds. This can be used to check whether analysis
            should be run or not - for instance if analyzing a dacpac, comparing the modification time for the dacpac versus
            the analysis success file can tell you whether the dacpac is more recent than the last analysis.
            
            This property directly maps to <see cref="P:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService.CodeAnalysisSucceededFile"/>.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisServiceSettings.ValidationMode">
            <summary>
            Determines the validation performed on the model prior to code analysis. This can be used to bypass
            the requirement that a TSqlModel be valid prior to analysis by a code analysis rule.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.Internal.RuleUtils">
            <summary>
            Internal rule utilities that will never meet the conditions for sharing with the public via an open API
            or inclusion in a sample project
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Internal.RuleUtils.TryGetTSqlObject(Microsoft.SqlServer.Dac.Model.TSqlModel,Microsoft.Data.Tools.Schema.Sql.SchemaModel.ISqlModelElement,Microsoft.SqlServer.Dac.Model.TSqlObject@)">
            <summary>
            Tries to map an internal element to a public element. 
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Internal.RuleUtils.GetSchemaObjectName(Microsoft.SqlServer.Dac.Model.TSqlModel,Microsoft.SqlServer.Dac.Model.TSqlObject)">
            <summary>
            Get the schema object name in EscapedFullyQualifiedName format from an ISqlModelElement
            </summary>
            <param name="model"></param>
            <param name="element"></param>
            <returns></returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Internal.RuleUtils.GetSchemaObjectName(Microsoft.SqlServer.Dac.Model.TSqlModel,Microsoft.SqlServer.Dac.Model.ElementDescriptor)">
            <summary>
            Get the schema object name in EscapedFullyQualifiedName format from a Sql element Descriptor
            </summary>
            <param name="model"></param>
            <param name="elementDescriptor"></param>
            <returns></returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Internal.RuleUtils.GetSchemaObjectName(Microsoft.SqlServer.Dac.Model.TSqlModel,Microsoft.SqlServer.Dac.Model.ElementDescriptor,Microsoft.SqlServer.Dac.Model.ElementNameStyle)">
            <summary>
            Get the schema object name in user's choice of format from a Sql element Descriptor
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Internal.RuleUtils.GetSchemaObjectName(Microsoft.SqlServer.Dac.Model.TSqlModel,Microsoft.SqlServer.Dac.Model.TSqlObject,Microsoft.SqlServer.Dac.Model.ElementNameStyle)">
            <summary>
            Get the schema object name in user's choice of format from an ISqlModelElement
            </summary> 
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.ProblemSuppressionException">
            <summary>
            Represents an exception that occurred when running the rule problem suppression test.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.DacModelException">
            <summary>
            Exception throw from DAC model errors.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.DacModelException.#ctor">
            <summary>
             Construct a new instance of the <see cref="T:Microsoft.SqlServer.Dac.Model.DacModelException"/> class.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.DacModelException.#ctor(System.String)">
            <summary>
            Construct a new instance of the <see cref="T:Microsoft.SqlServer.Dac.Model.DacModelException"/> class with the specified error message.
            </summary>
            <param name="message"></param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.DacModelException.#ctor(System.String,System.Exception)">
            <summary>
            Construct a new instance of the <see cref="T:Microsoft.SqlServer.Dac.Model.DacModelException"/> class with the specified error message
            and a reference to the inner exception that is the cause of this exception.
            </summary>
            <param name="message">
            The message that describes the error.
            </param>
            <param name="innerException">
            The exception that is the cause of the current exception, or a null reference if no inner exception is specified.
            </param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.DacModelException.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
             <summary>
            
             </summary>
             <param name="info"></param>
             <param name="context"></param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.DacModelException.GetObjectData(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
            <summary>
            Write exception information to the supplied <see cref="T:System.Runtime.Serialization.SerializationInfo"/> object.
            </summary>
            <param name="info">
            <see cref="T:System.Runtime.Serialization.SerializationInfo"/> that holds the serialized object data.
            </param>
            <param name="context">
            <see cref="T:System.Runtime.Serialization.StreamingContext"/> that contains contextual information about the source or destination.
            </param>
            <exception cref="T:System.ArgumentNullException">
            If <paramref name="info"/> is a null reference.
            </exception>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelException.Messages">
            <summary>
            Get collection of additional error, warning, and informational messages associated with this exception.
            </summary>
            <value>
            Collection of additional messages associated with this exception.
            </value>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.ProblemSuppressionException.#ctor">
            <summary>
             Construct a new instance of the <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.ProblemSuppressionException"/> class.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.ProblemSuppressionException.#ctor(System.String)">
            <summary>
            Construct a new instance of the <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.ProblemSuppressionException"/> class with the specified error message.
            </summary>
            <param name="message"></param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.ProblemSuppressionException.#ctor(System.String,System.Exception)">
            <summary>
            Construct a new instance of the <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.ProblemSuppressionException"/> class with the specified error message
            and a reference to the inner exception that is the cause of this exception.
            </summary>
            <param name="message">
            The message that describes the error.
            </param>
            <param name="innerException">
            The exception that is the cause of the current exception, or a null reference if no inner exception is specified.
            </param>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.ProjectProblemSuppressor">
            <summary>
            Represents the problem suppressor used by SSDT projects. The <see cref="P:Microsoft.SqlServer.Dac.CodeAnalysis.ProjectProblemSuppressor.ShouldSuppressProblem"/> method
            can be passed to <see cref="P:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisServiceSettings.ShouldSuppressProblem"/> in order to use this 
            class.
            
            This reads suppression information from a file with a name matching
            <see cref="F:Microsoft.SqlServer.Dac.CodeAnalysis.ProjectProblemSuppressor.SuppressionFilename"/> ("StaticCodeAnalysis.SuppressMessages.xml") in the root directory.
            
            All relative paths will be resolved relative to the project folder defined in the constructor
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.CodeAnalysis.ProjectProblemSuppressor.SuppressionFilename">
            <summary>
            The default file name for a message suppression file within a project.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.ProjectProblemSuppressor.CreateSuppressor(Microsoft.Data.Tools.Schema.Sql.RuleEngine.MessageSuppressionFileManager)">
            <summary>
            Internal factory method that creates a new <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.ProjectProblemSuppressor"/>.
            </summary>
            <param name="suppressionFileManager">
            The file manager to use for loading/saving suppression rules. 
            </param>
            <returns><see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.ProjectProblemSuppressor"/></returns>
            <exception cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.ProblemSuppressionException">
            Thrown if there was a problem parsing the XML
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.ProjectProblemSuppressor.CreateSuppressor(System.String)">
            <summary>
            Creates a new <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.ProjectProblemSuppressor"/>.
            </summary>
            <param name="projectFolder">
            The folder in which the XML Message suppression file is found. 
            Any rule suppressed using a relative file path will base the full path off
            this folder location. 
            </param>
            <returns><see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.ProjectProblemSuppressor"/> </returns>
            <exception cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.ProblemSuppressionException">
            Thrown if the Path to the XML file was invalid or if there was a problem parsing the XML
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.ProjectProblemSuppressor.CreateSuppressor(System.String,System.String)">
            <summary>
            Creates a new <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.ProjectProblemSuppressor"/>.
            </summary>
            <param name="projectFolder">
            The folder in which the XML Message suppression file is found. 
            Any rule suppressed using a relative file path will base the full path off
            this folder location. 
            </param>
            <param name="suppressionFilename">'
            The name of the XML message suppression file. This is expected to be under the project folder.
            </param>
            <returns><see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.ProjectProblemSuppressor"/> </returns>
            <exception cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.ProblemSuppressionException">
            Thrown if the Path to the XML file was invalid or if there was a problem parsing the XML
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.ProjectProblemSuppressor.ResetSuppressedProblems">
            <summary>
            Resets the suppressed problems to their default state. If an XML suppression file for the
            project existed already then the state will be reloaded from there, otherwise it will
            be reset so that no problems are suppressed.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.ProjectProblemSuppressor.UnsuppressRulesFromFile(System.String)">
            <summary>
            Removes all problem suppression directives for a particular filename.
            
            The updated set of problems to suppress will be immediately written out to the backing XML file that describes what
            rules should be suppressed for a given file. 
            </summary>
            <param name="fileName">path to the file</param>
            <exception cref="T:System.ArgumentNullException">If the <paramref name="fileName"/> is null</exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.ProjectProblemSuppressor.GetSuppressedProblems">
            <summary>
            Gets information on what problems will be suppressed. Specifically, a set of
            <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.SuppressedProblemInfo"/> objects will be returned that defines each combination of a
            rule being suppressed and the file name for which the rule is suppressed.
            </summary>
            <returns>A list of <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.SuppressedProblemInfo"/> objects defining each combination of a
            rule being suppressed and the file name for which the rule is suppressed</returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.ProjectProblemSuppressor.AddSuppressedProblems(System.Collections.Generic.IEnumerable{Microsoft.SqlServer.Dac.CodeAnalysis.SuppressedProblemInfo})">
            <summary>
            Adds one or more instances of <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.SuppressedProblemInfo"/> to the set of suppressed problems.
            The full set of suppressed problems will be immediately written out to the backing XML file.
            </summary>
            <param name="suppressedProblems">
            An IEnumerable of <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.SuppressedProblemInfo"/> objects defining each combination of a 
            file for which some problems should be suppressed, and the specific rule whose problems should be
            suppressed.
            </param>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.ProjectProblemSuppressor.ShouldSuppressProblem">
            <summary>
            Gets the predicate that can be used to
            
            If any errors occur during
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.RuleDescriptor">
            <summary>
            Describes a rule discovered by the rule engine and supports configuration of its properties.
            Descriptors inherit properties from <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.RuleConfiguration"/>, to support enabling/disabling the rule during
            analysis and specifying the severity for problems created by the rule. 
            
            This class is not intended to be subclasses by external users - instances of <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.RuleDescriptor"/> are created
            by the analysis service.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.RuleConfiguration">
            <summary>
            Specifies how a rule should be configured - should this be enabled or disabled? What severity should be applied
            for the rule?
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.RuleConfiguration.#ctor(System.String)">
            <summary>
            Creates a new <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.RuleConfiguration"/> for a rule, using the default settings for <see cref="P:Microsoft.SqlServer.Dac.CodeAnalysis.RuleConfiguration.Enabled"/>
            and <see cref="P:Microsoft.SqlServer.Dac.CodeAnalysis.RuleConfiguration.Severity"/>.
            </summary>
            <param name="ruleId">ID of the rule this configuration specifies. Cannot be null or whitespace.</param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.RuleConfiguration.#ctor(System.String,System.Boolean,Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblemSeverity)">
            <summary>
            Creates a new <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.RuleConfiguration"/> for a rule.
            </summary>
            <param name="ruleId">ID of the rule this configuration specifies. Cannot be null or whitespace.</param>
            <param name="enabled">Is this rule enabled or disabled?</param>
            <param name="severity">What is the severity of problems identified by this rule? Should be either 
            <see cref="F:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblemSeverity.Warning"/> or <see cref="F:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblemSeverity.Error"/>.</param>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.RuleConfiguration.RuleId">
            <summary>
            Gets the unique Id used to identify the rule. This is the fully qualified ID, which would usually be
            in the form "My.Org.MyRuleName".
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.RuleConfiguration.Namespace">
            <summary>
            Gets the namespace for the rule. This is the part of the rule that precedes the final "." in the ID name.
            For instance for a rule ID "My.Org.MyRuleName", the namespace would be "My.Org".
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.RuleConfiguration.ShortRuleId">
            <summary>
            Gets the last part of the rule ID. This is the part of the rule that follows the final "." in the ID name.
            For instance for a rule ID "My.Org.MyRuleName", the short rule ID would be "MyRuleName".
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.RuleConfiguration.Enabled">
            <summary>
            Specifies if the rule is enabled and should be included in the code analysis.
            
            The default value is true
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.RuleConfiguration.Severity">
            <summary>
            What severity should problems created by the rule have?
            
            The default severity is <see cref="F:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblemSeverity.Warning"/>
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.RuleDescriptor.#ctor(System.String)">
            <summary>
            Protected constructor to be called by implementing classes.
            </summary>
            <param name="ruleId">ID of the rule being described</param>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.RuleDescriptor.DisplayDescription">
            <summary>
            The description of the rule. This should be a short human readable description of what the
            rule is intended to warn against or block.
            
            This is automatically read from the <see cref="P:Microsoft.SqlServer.Dac.CodeAnalysis.RuleDescriptor.Metadata"/> property
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.RuleDescriptor.DisplayName">
            <summary>
            Display name describing the rule.
            
            This is automatically read from the <see cref="P:Microsoft.SqlServer.Dac.CodeAnalysis.RuleDescriptor.Metadata"/> property
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.RuleDescriptor.Rule">
            <summary>
            The actual instance of the <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.SqlAnalysisRule"/>
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.RuleDescriptor.Metadata">
            <summary>
            The <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.ISqlAnalysisRuleMetadata"/> describing the rule.
            This is a required property that must be defined by subclasses.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisRuleSettings">
            <summary>
            The settings used to configure rules used during analysis. 
            
            Before analysis begins, this settings object will be applied to the rules discovered 
            by the analysis service. If DisableRulesNotInSettings is set to true then any rules 
            not included in these settings will be disabled and not run during analysis. 
            
            These settings are applied by calling the <see cref="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisRuleSettings.ApplySettingsToRules(System.Collections.Generic.IEnumerable{Microsoft.SqlServer.Dac.CodeAnalysis.RuleConfiguration})"/> method
            on rules returned by the engine.
            
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisRuleSettings.#ctor">
            <summary>
            Creates a new <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisRuleSettings"/> object.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisRuleSettings.#ctor(System.Collections.Generic.IEnumerable{Microsoft.SqlServer.Dac.CodeAnalysis.RuleConfiguration})">
            <summary>
            Creates a new <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisRuleSettings"/> containing a set of rules.
            </summary>
            <param name="rules">The rules to include</param>
            <exception cref="T:System.ArgumentNullException">If <paramref name="rules"/> is null</exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisRuleSettings.CreateFromSettingsString(System.String,System.Collections.Generic.IList{Microsoft.SqlServer.Dac.Extensibility.ExtensibilityError}@)">
            <summary>
            Creates a <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisRuleSettings"/> configuration based on a settings string like the one used
            inside SSDT project files. This string defines what rules should be disabled or have their problems treated as
            errors instead of warnings. Any rule not included in the settings string will be enabled by default.
            </summary>
            <param name="settingsString">
            A semicolon delimited string identifying rules to be disabled or have problems treated as errors.
            The format is "-My.Disabled.Rule;+!My.Enabled.RuleWithError;-!My.Disabled.RuleWithError". Hence disabled rules should have "-" 
            before their ID and enabled rules with errors should have "+!" before their ID. 
            Only rules that are to be disabled or have their problems treated as errors should be included in the settings string.
            
            If this parameter is null or contains no valid rules, a default empty configuration will be returned. This will result in all
            discovered rules being run.
            </param>
            <param name="errors">List of errors found when processing the list.</param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisRuleSettings.ConvertToSettingsString">
            <summary>
            Converts the rule configuration info in this <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisRuleSettings"/> object into a
            settings string like the one used
            inside SSDT project files. This string defines what rules should be disabled or have their problems treated as
            errors instead of warnings. Any rule not included in the settings string will be enabled by default.
            </summary>
            <returns>
            A semicolon delimited string identifying rules to be disabled or have problems treated as errors.
            The format is "-My.Disabled.Rule;+!My.Enabled.RuleWithError;-!My.Disabled.RuleWithError". Hence disabled rules have "-" 
            before their ID and enabled rules with errors have "+!" before their ID. 
            Only rules that are to be disabled or have their problems treated as errors should be included in the settings string.
            </returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisRuleSettings.AddRange(System.Collections.Generic.IEnumerable{Microsoft.SqlServer.Dac.CodeAnalysis.RuleConfiguration})">
            <summary>
            Adds multiple <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.RuleConfiguration"/> objects to the list of rules
            </summary>
            <param name="rules">The rules to include</param>
            <exception cref="T:System.ArgumentNullException">If <paramref name="rules"/> is null</exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisRuleSettings.Add(Microsoft.SqlServer.Dac.CodeAnalysis.RuleConfiguration)">
            <summary>
            Adds a new <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.RuleConfiguration"/> object to the list of rules
            </summary>
            <param name="item">item to be added</param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisRuleSettings.Remove(Microsoft.SqlServer.Dac.CodeAnalysis.RuleConfiguration)">
            <summary>
            Removes a <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.RuleConfiguration"/> object from the list of rules.
            </summary>
            <param name="item">item to be removed</param>
            <returns>true if the item was successfully removed</returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisRuleSettings.GetEnumerator">
            <summary>
            <see cref="M:System.Collections.IEnumerable.GetEnumerator"/>
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisRuleSettings.FindConfiguration(System.String)">
            <summary>
            Tries to find the <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.RuleConfiguration"/> that matches the specified
            <paramref name="ruleId"/>. If the configuration doesn't exist then null will be returned
            </summary>
            <param name="ruleId">The fully qualified rule ID</param>
            <returns><see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.RuleConfiguration"/>, or null if none matches the <paramref name="ruleId"/></returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisRuleSettings.TryGetRuleConfiguration(System.String,Microsoft.SqlServer.Dac.CodeAnalysis.RuleConfiguration@)">
            <summary>
            Tries to find the <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.RuleConfiguration"/> that matches the specified
            <paramref name="ruleId"/>.  
            </summary>
            <param name="ruleId">The fully qualified rule ID</param>
            <param name="config">out <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.RuleConfiguration"/>, or null if none matches the <paramref name="ruleId"/></param>
            <returns>true if a configuration matching the specified <paramref name="ruleId"/> was found, false otherwise</returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisRuleSettings.ApplySettingsToRules(System.Collections.Generic.IEnumerable{Microsoft.SqlServer.Dac.CodeAnalysis.RuleConfiguration})">
            <summary>
            Applies these settings to another set of rules.
            </summary>
            <param name="rules">The rules the settings should be applied to</param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisRuleSettings.EnableRule(System.String)">
            <summary>
            Includes a rule for execution
            </summary>
            <param name="ruleId">Fully qualified Id for the rule</param>
            <exception cref="T:System.ArgumentException">If the <paramref name="ruleId"/> is null or whitespace</exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisRuleSettings.DisableRule(System.String)">
            <summary>
            Excludes a rule from execution
            </summary>
            <param name="ruleId">Fully qualified Id for the rule</param>
            <exception cref="T:System.ArgumentException">If the <paramref name="ruleId"/> is null or whitespace</exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisRuleSettings.TreatRuleProblemAsWarning(System.String)">
            <summary>
            Treat any problems found a rule as warnings
            </summary>
            <param name="ruleId">Fully qualified Id for the rule</param>
            <exception cref="T:System.ArgumentException">If the <paramref name="ruleId"/> is null or whitespace</exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisRuleSettings.TreatRuleProblemAsError(System.String)">
            <summary>
            Treat any problems found a rule as errors
            </summary>
            <param name="ruleId">Fully qualified Id for the rule</param>
            <exception cref="T:System.ArgumentException">If the <paramref name="ruleId"/> is null or whitespace</exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisRuleSettings.IsRuleDisabled(System.String)">
            <summary>
            Is a particular rule in the rule settings disabled?
            </summary>
            <param name="ruleId">Fully qualified Id for the rule</param>
            <returns>true if the problem is disabled; false otherwise</returns>
            <exception cref="T:System.ArgumentException">If the <paramref name="ruleId"/> is null or whitespace</exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisRuleSettings.IsRuleProblemTreatedAsError(System.String)">
            <summary>
            Is a particular rule in the rule settings treated as error?
            </summary>
            <param name="ruleId">Fully qualified Id for the rule</param>
            <returns>true if the problem is treated as error; false otherwise</returns>
            <exception cref="T:System.ArgumentException">If the <paramref name="ruleId"/> is null or whitespace</exception>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisRuleSettings.DisableRulesNotInSettings">
            <summary>
            Should rules not found in these settings be disabled? The default is "false", so that
            any rules not explicitly covered in the settings will still be run during analysis. 
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.RuleException">
            <summary>
            Represent an exception that may occur during a code analysis run
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.RuleException.#ctor">
            <summary>
            Initialize a new instance of <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.RuleException"/> 
            Exception message and inner exceptions are set to null
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.RuleException.#ctor(System.String)">
            <summary>
            Initialize a new instance of <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.RuleException"/>  with a message
            </summary>
            <param name="message">Exception message</param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.RuleException.#ctor(System.String,System.Exception)">
            <summary>
            Initialize a new instance of <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.RuleException"/> with a message and an inner exception
            </summary>
            <param name="message">Exception message</param>
            <param name="innerException">Inner exception to attached to this exception</param>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.CommonUtilities.ElementNameAstLocatorSchemaAnalyzer">
            <summary>
            The class to locate the accurate AST that defines the name for a model element
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.SchemaAnalyzer">
            <summary>
            The base class that defines analysis events. 
            
            This analyzer works against the <see cref="T:Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment"/>s that represent 
            the exact DDL language describing an object.
            
            This makes it easier to examine the actual script/fragment structure that represents 
            an object.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.SchemaAnalyzer.BeginBatch(Microsoft.SqlServer.TransactSql.ScriptDom.TSqlBatch)">
            <summary>
            This method handles pre-batchprocessing
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.SchemaAnalyzer.EndBatch(Microsoft.SqlServer.TransactSql.ScriptDom.TSqlBatch)">
            <summary>
            This method handles post-batchprocessing
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.SchemaAnalyzer.BeginDdlStatement(Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment)">
            <summary>
            This method handles pre-DDL statement processing 
            </summary>
            <param name="fragment">Node that will be processed</param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.SchemaAnalyzer.EndDdlStatement(Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment)">
            <summary>
            This method handles post-DDL statement processing
            </summary>
            <param name="fragment">Node that was processed</param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.SchemaAnalyzer.IdentifiedElement(Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment,Microsoft.SqlServer.Dac.Model.ElementDescriptor)">
            <summary>
            This method handles the discovery of a new Symbol
            </summary>
            <param name="fragment">Fragment the symbol belongs to</param>
            <param name="elementDescriptor">The element descriptor</param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.SchemaAnalyzer.BeginDmlStatement(Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment)">
            <summary>
            This method handles the pre-DML statement processing
            </summary>
            <param name="fragment">Node that will be processed</param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.SchemaAnalyzer.EndDmlStatement(Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment)">
            <summary>
            This method handles the post-DML statement processing
            </summary>
            <param name="fragment">Node that will be processed</param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.SchemaAnalyzer.VisitFragment(Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment,Microsoft.SqlServer.Dac.Model.ElementDescriptor,Microsoft.SqlServer.Dac.Model.ElementDescriptorRelevance)">
            <summary>
            This method handles additional processing required for a node/schemaidentifier
            </summary>
            <param name="fragment">Node to be processed</param>
            <param name="elementDescriptor">Descriptor to be processed</param>
            <param name="relevance">Relevance</param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.SchemaAnalyzer.VisitAmbiguousFragment(Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment,System.Collections.Generic.IEnumerable{Microsoft.SqlServer.Dac.Model.PotentialElementDescriptor})">
            <summary>
            This method handles additional processing required for a node/schemaidentifier
            </summary>
            <param name="fragment">Node to be processed</param>
            <param name="possibilities">An enumerable of possible hits</param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.SchemaAnalyzer.IdentifiedSupportingStatement(Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment,Microsoft.SqlServer.Dac.Model.ElementDescriptor)">
            <summary>
            This method handles the discovery of a new supporting statement
            </summary>
            <param name="fragment">Node to be processed</param>
            <param name="elementDescriptor"></param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.SchemaAnalyzer.AnalyzeScript(Microsoft.SqlServer.Dac.Model.TSqlModel,Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment)">
            <summary>
            Runs the schema analysis against a fragment
            </summary>
            <param name="model"><see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/> the fragment is linked to</param>
            <param name="sqlFragment">the fragment to analyze</param>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.CommonUtilities.ElementNameAstLocatorSchemaAnalyzer.NameAstNode">
            <summary>
            The TSqlFragment referring to the name of the element
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.CommonUtilities.ElementNameAstLocatorSchemaAnalyzer.ElementAstNode">
            <summary>
            The TSqlFragment referring to the element itself
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.SqlCodeAnalysisRule">
            <summary>
            Base class for SQL static code analysis rules. An analysis rule analyzes a model / model element and returns a list of
            problems found during analysis.
            
            Implementing classes must have a <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.ExportCodeAnalysisRuleAttribute"/> defined on the
            class definition to be discovered and used during code analysis. 
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.SqlAnalysisRule">
            <summary>
            Base class for all types of analysis rule. An analysis rule analyzes a model / model element and returns a list of
            problems found during analysis. 
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.SqlAnalysisRule.Analyze(Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleExecutionContext)">
            <summary>
            Performs analysis and returns a list of problems detected
            </summary>
            <param name="ruleExecutionContext">Contains the schema model and model element to analyze</param>
            <returns>The problems detected by the rule in the given element</returns>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.SqlAnalysisRule.SupportedElementTypes">
            <summary>
            Types of elements checked by this rule. Required if the rule scope is <see cref="F:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleScope.Element"/>,
            for <see cref="F:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleScope.Model"/> scoped rules this is not relevant
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Design.DataTypeCompatibilityRule.Analyze(Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleExecutionContext)">
            <summary>
            perform actual analysis
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.RuleSchemaAnalyzer">
            <summary>
            A type of <see cref="T:Microsoft.SqlServer.Dac.Model.SchemaAnalyzer"/> that can be used by code analysis 
            rules to examine the internal structure of a <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/>.
            This analyzer works against the <see cref="T:Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment"/>s that represents 
            the exact DDL language describing an object.
            
            This makes it easier to examine the actual script/fragment structure that represents an object.
            </summary>
            <remarks>
            For some data sources such as dacpacs, the backing script and <see cref="T:Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment"/>s 
            will be auto-generated by DacFx. Any analyzer that tries to enforce stylistic rules such as
            blocking the use of brackets to escape object names should be disabled when running against 
            those sources - they would be raising issues about the default DacFx style conventions rather
            than the actual code contents of a project.
            </remarks>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.RuleSchemaAnalyzer.#ctor(Microsoft.SqlServer.Dac.CodeAnalysis.RuleDescriptor,Microsoft.SqlServer.Dac.Model.TSqlModel,Microsoft.SqlServer.Dac.Model.TSqlObject)">
            <summary>
            Creates a <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.RuleSchemaAnalyzer"/> that helps analyze an element on behalf of a rule
            </summary>
            <param name="rule">
            <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.RuleDescriptor"/> defining a rule and its metadata properties.
            This can be used to get the description for a rule and add it to any <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblem"/>, among other things
            being created, or query any other metadata information about the rule
            </param>
            <param name="schemaModel">The <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/> being analyzed</param>
            <param name="element">A specific <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> whose backing <see cref="T:Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment"/>
            is to be analyzed</param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.RuleSchemaAnalyzer.BeginBatch(Microsoft.SqlServer.TransactSql.ScriptDom.TSqlBatch)">
            <summary>
            <see cref="M:Microsoft.SqlServer.Dac.Model.SchemaAnalyzer.BeginBatch(Microsoft.SqlServer.TransactSql.ScriptDom.TSqlBatch)"/>
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.RuleSchemaAnalyzer.EndBatch(Microsoft.SqlServer.TransactSql.ScriptDom.TSqlBatch)">
            <summary>
            <see cref="M:Microsoft.SqlServer.Dac.Model.SchemaAnalyzer.EndBatch(Microsoft.SqlServer.TransactSql.ScriptDom.TSqlBatch)"/>
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.RuleSchemaAnalyzer.BeginDmlStatement(Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment)">
            <summary>
            <see cref="M:Microsoft.SqlServer.Dac.Model.SchemaAnalyzer.BeginDmlStatement(Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment)"/>
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.RuleSchemaAnalyzer.EndDmlStatement(Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment)">
            <summary>
            <see cref="M:Microsoft.SqlServer.Dac.Model.SchemaAnalyzer.EndDmlStatement(Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment)"/>
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.RuleSchemaAnalyzer.BeginDdlStatement(Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment)">
            <summary>
            <see cref="M:Microsoft.SqlServer.Dac.Model.SchemaAnalyzer.BeginDdlStatement(Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment)"/>
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.RuleSchemaAnalyzer.EndDdlStatement(Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment)">
            <summary>
            <see cref="M:Microsoft.SqlServer.Dac.Model.SchemaAnalyzer.EndDdlStatement(Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment)"/>
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.RuleSchemaAnalyzer.IdentifiedElement(Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment,Microsoft.SqlServer.Dac.Model.ElementDescriptor)">
            <summary>
            <see cref="M:Microsoft.SqlServer.Dac.Model.SchemaAnalyzer.IdentifiedElement(Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment,Microsoft.SqlServer.Dac.Model.ElementDescriptor)"/>
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.RuleSchemaAnalyzer.VisitFragment(Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment,Microsoft.SqlServer.Dac.Model.ElementDescriptor,Microsoft.SqlServer.Dac.Model.ElementDescriptorRelevance)">
            <summary>
            <see cref="M:Microsoft.SqlServer.Dac.Model.SchemaAnalyzer.VisitFragment(Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment,Microsoft.SqlServer.Dac.Model.ElementDescriptor,Microsoft.SqlServer.Dac.Model.ElementDescriptorRelevance)"/>
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.RuleSchemaAnalyzer.VisitAmbiguousFragment(Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment,System.Collections.Generic.IEnumerable{Microsoft.SqlServer.Dac.Model.PotentialElementDescriptor})">
            <summary>
            <see cref="M:Microsoft.SqlServer.Dac.Model.SchemaAnalyzer.VisitAmbiguousFragment(Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment,System.Collections.Generic.IEnumerable{Microsoft.SqlServer.Dac.Model.PotentialElementDescriptor})"/>
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.RuleSchemaAnalyzer.AnalyzeScriptForSqlRule(Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment,System.Collections.Generic.List{Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblem})">
            <summary>
            Runs rule analysis against a fragment and adds any problems found to the 
            <paramref name="problems"/> list.
            </summary>
            <param name="sqlFragment">A fragment whose contents should be analyzed</param>
            <param name="problems">Problems found by the analyzer are added to this list</param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.RuleSchemaAnalyzer.TryGetModelElementFromPossibilities(System.Collections.Generic.IEnumerable{Microsoft.SqlServer.Dac.Model.PotentialElementDescriptor},Microsoft.SqlServer.Dac.Model.TSqlModel,Microsoft.SqlServer.Dac.Model.TSqlObject@,Microsoft.SqlServer.Dac.Model.ElementDescriptor@,Microsoft.SqlServer.Dac.Model.ElementDescriptorRelevance@)">
            <summary>
            Tries to determine the correct model element from a set of possible matching element descriptors.
            </summary>
            <param name="possibilities">Descriptors for  </param>
            <param name="model">The <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/></param>
            <param name="element">out <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> that matches the best possibility, or null if lookup failed</param>
            <param name="elementDescriptor">out <see cref="T:Microsoft.SqlServer.Dac.Model.ElementDescriptor"/> for the element that was matched, or
            null if the lookup failed</param>
            <param name="relevance">out <see cref="T:Microsoft.SqlServer.Dac.Model.ElementDescriptorRelevance"/> describing the relavance of the 
            <paramref name="elementDescriptor"/> to the <paramref name="element"/></param>
            <returns>true if the lookup succeeded</returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.RuleSchemaAnalyzer.AddProblem(Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblem)">
            <summary>
            add a problem found by the current analyzer
            </summary>
            <param name="problem"></param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.RuleSchemaAnalyzer.ClearProblems">
            <summary>
            clean up all the problems
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.RuleSchemaAnalyzer.DebugWriteLine(System.String)">
            <summary>
            Print a message to debug window in Debug mode
            </summary>
            <param name="msg"></param>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.RuleSchemaAnalyzer.Problems">
            <summary>
            Get all problems identified by this analyzer
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.RuleSchemaAnalyzer.SchemaModel">
            <summary>
            get the SQL schema manager used by the current analyzer
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.RuleSchemaAnalyzer.Rule">
            <summary>
            Get the the rule associated with the current analyzer
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.RuleSchemaAnalyzer.ModelElement">
            <summary>
            Get the element for which the current analyzer works
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Design.DataTypeCompatibilitySchemaAnalyzer.#ctor(Microsoft.SqlServer.Dac.CodeAnalysis.RuleDescriptor,Microsoft.SqlServer.Dac.Model.TSqlModel,Microsoft.SqlServer.Dac.Model.TSqlObject)">
            <summary>
            constructor
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Design.TypeCompatibilityChecker">
            <summary>
            Note: This class relies on internal code that is shared with the internal validation rules. In order to minimize code 
            reuse and avoid unnecessarily duplicating code, some parts of this class directly use and call into the internal model.
            This is viewed as acceptable as upgrading to the public API isn't really necessary and would not provide significant
            benefits to external users.
            
            In addition, some internal objects such as dynamic column sources cannot be mapped to the public model and hence
            it is necessary to use the internal object model in cases where those objects might have issues
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Design.TypeCompatibilityChecker.CollectLocalColumnDefinitions(System.Collections.Generic.Dictionary{Microsoft.SqlServer.Dac.Model.ElementDescriptor,Microsoft.SqlServer.TransactSql.ScriptDom.ColumnDefinition})">
            <summary>
            convert TSql.DataType to TSqlDataTypeInfo
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Design.TypeCompatibilityChecker.CheckVariableAssignment(Microsoft.SqlServer.TransactSql.ScriptDom.VariableReference,Microsoft.Data.Tools.Schema.Sql.Common.TypeEvaluator.TSqlDataTypeInfo,Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment)">
            <summary>
            This method is used to check variable assignment from proc/function return value to a variable
            Use this if you know the type of proc/function return value
            </summary>
            <param name="variable"></param>
            <param name="fromDataType"></param>
            <param name="fragmentToReport"></param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Design.TypeCompatibilityChecker.CheckAssignmentSetClause(Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment)">
            <summary>
            we currently support
              column_name = expression, 
              @variable = expression, and
              @variable = column = expression  
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Design.TypeCompatibilityChecker.CollectParameterInfo(Microsoft.SqlServer.Dac.Model.TSqlObject,System.Collections.Generic.IList{Microsoft.SqlServer.TransactSql.ScriptDom.ExecuteParameter},Microsoft.SqlServer.Dac.Model.ModelCollationComparer,System.Collections.Generic.Dictionary{System.String,Microsoft.Data.Tools.Schema.Sql.Common.TypeEvaluator.TSqlDataTypeInfo}@,System.Collections.ObjectModel.ReadOnlyCollection{Microsoft.Data.Tools.Schema.Sql.SchemaModel.ParameterValueInfo}@)">
            <summary>
            Return a dictionary with parameter name key and type info value
            Return a list of parameter value info that is resolved using parameters from subroutine and execute statement
            </summary>
            <param name="subroutine"></param>
            <param name="executeParameterList"></param>
            <param name="comparer"></param>
            <param name="parameterNameToTypeMap"></param>
            <param name="parameterValueInfo"></param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Design.TypeCompatibilityChecker.TryGetParameters(Microsoft.SqlServer.Dac.Model.TSqlObject,System.Collections.Generic.IEnumerable{Microsoft.SqlServer.Dac.Model.TSqlObject}@)">
            <summary>
            All object types that match a subroutine are expected to have a "Parameters" relationship which we can read.
            We look up the relationship class dynamically since it will vary between Procedures, ScalarFunctions and other
            types
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Design.TypeCompatibilityChecker.TryGetReturnType(Microsoft.SqlServer.Dac.Model.TSqlObject,Microsoft.Data.Tools.Schema.Sql.Common.TypeEvaluator.TSqlDataTypeInfo@)">
            <summary>
            Attempts to look up the return type for a function
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Design.TypeCompatibilityChecker.GetTypeInfoForInsertTarget(Microsoft.SqlServer.TransactSql.ScriptDom.InsertStatement)">
            <summary>
            Must use the internal model here since dynamic object column sources aren't modelable in the public model,
            and this is a situation where those appear.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Design.TypeCompatibilityChecker.GetTypeInfoForAllColumnsOfTable(Microsoft.Data.Tools.Schema.SchemaModel.IModelElement)">
            <summary>
            This method heavily uses the internal implementation - again this whole class struggles to use the
            public model
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Design.TypeCompatibilityChecker.GetTypeInfoForColumn(Microsoft.SqlServer.Dac.Model.ElementDescriptor)">
            <summary>
            Note: This method uses internal methods
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Design.TypeCompatibilityChecker.GetTypeInfoForUdtUddt(Microsoft.SqlServer.Dac.Model.ElementDescriptor)">
            <summary>
            get TSqlDataTypeInfo for the acutal data type of a UDT and UDDT based on its 
            SqlElementDescriptor.
            </summary>
            <param name="uddtDescriptor">ElementDescriptor for the UDDT or UDT</param>
            <returns>actual data type if found, null otherwise</returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Design.TypeCompatibilityChecker.TryGetFunctionDefinition(Microsoft.SqlServer.TransactSql.ScriptDom.FunctionCall,Microsoft.SqlServer.TransactSql.ScriptDom.FunctionStatementBody@,System.Collections.Generic.List{Microsoft.Data.Tools.Schema.Sql.Common.TypeEvaluator.TSqlDataTypeInfo}@)">
            <summary>
            Again we've failed to fully use the public model in this method, if this can be reviewed
            at a future date then perhaps this can be fixed.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Design.TypeCompatibilityChecker.IsAScalarModule(Microsoft.SqlServer.Dac.Model.ElementDescriptor)">
            <summary>
            Verifies a descriptor is a type of scalar module (ScalarFunctions and Aggregates count as this) 
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Design.TypeCompatibilityChecker.GetTypeInfoForSequenceName(Microsoft.SqlServer.TransactSql.ScriptDom.SchemaObjectName)">
            <summary>
            This method heavily uses the internal implementation - again this whole class struggles to use the
            public model
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Design.IdentitySchemaAnalyzer">
            <summary>
            The SchemaAnalyzer checks for the usages of system function @@IDENTITY
            and reports its possibe misuse.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Design.IdentitySchemaAnalyzer.#ctor(Microsoft.SqlServer.Dac.CodeAnalysis.RuleDescriptor,Microsoft.SqlServer.Dac.Model.TSqlModel,Microsoft.SqlServer.Dac.Model.TSqlObject)">
            <summary>
            Constructor with SqlAnalysisRule, SqlSchemaModel, and ISqlModelElement provided
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Design.OldStyleJoinSyntaxAnalysisRule.Analyze(Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleExecutionContext)">
            <summary>
            perform actual analysis
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Design.OldStyleJoinSyntaxSchemaAnalyzer.#ctor(Microsoft.SqlServer.Dac.CodeAnalysis.RuleDescriptor,Microsoft.SqlServer.Dac.Model.TSqlModel,Microsoft.SqlServer.Dac.Model.TSqlObject)">
            <summary>
            constructor
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Design.PopulateOutputParametersRule.Analyze(Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleExecutionContext)">
            <summary>
            perform actual analysis
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Design.PopulateOutputParametersSchemaAnalyzer.#ctor(Microsoft.SqlServer.Dac.CodeAnalysis.RuleDescriptor,Microsoft.SqlServer.Dac.Model.TSqlModel,Microsoft.SqlServer.Dac.Model.TSqlObject)">
            <summary>
            constructor
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Design.SelectAsteriskSchemaAnalyzer.#ctor(Microsoft.SqlServer.Dac.CodeAnalysis.RuleDescriptor,Microsoft.SqlServer.Dac.Model.TSqlModel,Microsoft.SqlServer.Dac.Model.TSqlObject)">
            <summary>
            Creates a new <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Design.SelectAsteriskSchemaAnalyzer"/> to analyze a particular element in the model.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Design.SmallVariableLengthTypesRule">
            <summary>
            This rule checks if a small length (less than three) is used for variable-length types, 
            which include VARCHAR, NVARCHAR, and VARBINARY
            Such data types can be used in various scenarios:
                column of regular tables
                column of temporary tables
                column of common table expressions
                subroutine parameter 
                variable
                scalar function return type
                user defined data types
                
            TODO, yangg: we currently dont' handle temporary table columns, cte columns, and variables, 
                         since interpretation is not ready yet
            
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Design.SmallVariableLengthTypesRule.Analyze(Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleExecutionContext)">
            <summary>
            perform actual analysis
            </summary> 
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Naming.ReservedWordsForTypeNameAnalysisRule.Analyze(Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleExecutionContext)">
            <summary>
            perform actual analysis
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Naming.ReservedWordsForTypeNameSchemaAnalyzer.#ctor(Microsoft.SqlServer.Dac.CodeAnalysis.RuleDescriptor,Microsoft.SqlServer.Dac.Model.TSqlModel,Microsoft.SqlServer.Dac.Model.TSqlObject)">
            <summary>
            Constructor with comparison manager 
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Naming.SpecialCharactersInObjectNameRule.DynamicObjectsLookup">
            <summary>
            Provides getters for the types that need to access dynamic objects - there's no clean way to do this.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Naming.SpecialCharactersInObjectNameRule.ProcessBodyScriptElements(Microsoft.SqlServer.Dac.Model.TSqlModel,Microsoft.SqlServer.Dac.Model.TSqlObject,System.Collections.Generic.IList{Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblem})">
            <summary>
            A subset of top-level types such as Procedures have a body script containing
            dynamic objects. We don't want to miss flagging errors in these, but these
            aren't accessible via the public model. To work around this we use the internal
            model implementation for this work
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Naming.SpPrefixForStoredProceduresRule.Analyze(Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleExecutionContext)">
            <summary>
            perform actual analysis
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Performance.ExtractDeterministicFunctionCallRule.Analyze(Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleExecutionContext)">
            <summary>
            perform actual analysis
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Performance.ExtractDeterministicFunctionCallSchemaAnalyzer.#ctor(Microsoft.SqlServer.Dac.CodeAnalysis.RuleDescriptor,Microsoft.SqlServer.Dac.Model.TSqlModel,Microsoft.SqlServer.Dac.Model.TSqlObject)">
            <summary>
            constructor
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Performance.LikePercentRule">
            <summary>
            The base rule for checking LikePredicate, we suggest using "m%" instead of "%m".
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Performance.LikePercentRule.Analyze(Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleExecutionContext)">
            <summary>
            perform actual analysis
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Performance.LikePercentSchemaAnalyzer">
            <summary>
            This rule checks whether the patterns of the LIKE predicate from WHERE clauses start
            with "%" while match expression is a column, which can cause a table scan and degrade
            performance
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Performance.LikePercentSchemaAnalyzer.#ctor(Microsoft.SqlServer.Dac.CodeAnalysis.RuleDescriptor,Microsoft.SqlServer.Dac.Model.TSqlModel,Microsoft.SqlServer.Dac.Model.TSqlObject)">
            <summary>
            constructor
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Performance.ColumnInsideExpressionChecker">
            <summary>
            the class is to find out all the columns participating in an expression but not part of function call or ISNULL
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Performance.MoveColumnToOneSideRule.Analyze(Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleExecutionContext)">
            <summary>
            perform actual analysis
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Performance.MoveColumnToOneSideSchemaAnalyzer">
            <summary>
            This rule suggests moving columns to one side of en expression in the WHERE clause, 
            thus to avoid table scan. 
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Performance.MoveColumnToOneSideSchemaAnalyzer.#ctor(Microsoft.SqlServer.Dac.CodeAnalysis.RuleDescriptor,Microsoft.SqlServer.Dac.Model.TSqlModel,Microsoft.SqlServer.Dac.Model.TSqlObject)">
            <summary>
            constructor
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Performance.NonIndexedColumnFromInPredicateRule">
            <summary>
            When we see an In Predicate, we want to check whether there is Table Index
            that it could use to boost the performance. If not, we give a warning. This
            is because In Predicate is executed by a Table Scan instead of Index Seek, which
            hugely slows down the SQL query performance.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Performance.NonIndexedColumnFromInPredicateRule.Analyze(Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleExecutionContext)">
            <summary>
            perform actual analysis
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Performance.NonIndexedColumnFromInPredicateSchemaAnalyzer">
            <summary>
            This checks whether a column test expression of the IN predicate has an
            index or not. If it does not, the evaluation of the predicate can cause
            a table scan and degrade the performance.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Performance.NonIndexedColumnFromInPredicateSchemaAnalyzer.#ctor(Microsoft.SqlServer.Dac.CodeAnalysis.RuleDescriptor,Microsoft.SqlServer.Dac.Model.TSqlModel,Microsoft.SqlServer.Dac.Model.TSqlObject)">
            <summary>
            constructor
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Performance.NonIndexedColumnFromInPredicateSchemaAnalyzer.ColumnHasIndex(Microsoft.SqlServer.Dac.Model.TSqlObject)">
            <summary>
            Check whether the specified column has index or not.
            </summary>
            <returns>true when the column has index; false, otherwise</returns>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Performance.CheckNullableColumnHelper">
            <summary>
            the class is to check whether a nullable column exists in an expression
            other than ISNULL function and IS NULL / IS NOT NULL operators
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Performance.NullableColumnRule">
            <summary>
            The base rule for Nullable Column Performance Rule.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Performance.NullableColumnRule.Analyze(Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleExecutionContext)">
            <summary>
            perform actual analysis
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.Performance.NullableColumnSchemaAnalyzer">
            <summary>
            This rule is to find out all the nullable columns used in WHERE predicates which
            do not act as operands of IS NULL / IS NOT NULL or arguments of ISNULL function
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.ExportCodeAnalysisRuleAttribute">
            <summary>
            Attribute defining a rule export, and the metadata about that rule. Implements ISqlAnalysisRuleMetadata,
            which should be used on the importer side to ensure type consistency
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.ISqlAnalysisRuleMetadata">
            <summary>
            The metadata describing a rule - its namespace, id, scope etc.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.ISqlAnalysisRuleMetadata.Description">
            <summary>
            The description of the rule. This should be a short human readable description of what the
            rule is intended to warn against or block.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.ISqlAnalysisRuleMetadata.RuleScope">
            <summary>
            The scope of this rule. Choose between <see cref="F:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleScope.Element"/> and <see cref="F:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleScope.Model"/>.
            Note that for element scoped rules, the <see cref="P:Microsoft.SqlServer.Dac.CodeAnalysis.SqlAnalysisRule.SupportedElementTypes"/> property must return
            one or more element types that can are supported for analysis by the rule
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.ISqlAnalysisRuleMetadata.Category">
            <summary>
            (Optional) Category used to group the rule in Visual Studio UI. This should never be localized
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.ExportCodeAnalysisRuleAttribute.#ctor(System.String,System.String)">
            <summary>
            Constructor
            </summary>
            <param name="id">Unique ID used to identify this rule. Required parameter, rule will not load if this is missing or empty</param>
            <param name="displayName">Display name to show in the Visual Studio UI. Required parameter, rule will not load if this is missing or empty</param>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.ExportCodeAnalysisRuleAttribute.Description">
            <summary>
            The description of the rule. This should be a short human readable description of what the
            rule is intended to warn against or block. This field is localizable, but this should be done
            be subclassing <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.ExportCodeAnalysisRuleAttribute"/> and overriding the Description property. 
            </summary>
            <example>
            <code>
            // Example of an Attribute class that supports localized descriptions:
            public class TestLocalizedExportCodeAnalysisRuleAttribute : ExportCodeAnalysisRuleAttribute
            {
                private readonly string _descriptionResourceName;
                private string _descriptionValue;
            
                public TestLocalizedExportCodeAnalysisRuleAttribute(string id, string displayName, string descriptionResourceName)
                    : base(id, displayName)
                {
                    _descriptionResourceName = descriptionResourceName;
                }
            
                public override string Description
                {
                    get
                    {
                        if (_descriptionValue == null)
                        {
                            // Using the descriptionResourceName as the key for looking up the description in the resources file. 
                            // MyResources is a resource file in the same project as the LocalizedExportCodeAnalysisRuleAttribute class. 
                            // For each rule, and entry should be added to the resources file with the descriptionResourceName as the
                            // key and the description as the value
                            _descriptionValue = MyResources.ResourceManager.GetString(_descriptionResourceName);
                        }
                        return _descriptionValue;
                    }
                }
            }
            </code>
            </example>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.ExportCodeAnalysisRuleAttribute.RuleScope">
            <summary>
            <see cref="P:Microsoft.SqlServer.Dac.CodeAnalysis.ISqlAnalysisRuleMetadata.RuleScope"/>
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.ExportCodeAnalysisRuleAttribute.Category">
            <summary>
            <see cref="P:Microsoft.SqlServer.Dac.CodeAnalysis.ISqlAnalysisRuleMetadata.Category"/>
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.LocalizedExportCodeAnalysisRuleAttribute.GetAssembly">
            <summary>
            Rules in a different assembly would need to overwrite this
            </summary>
            <returns></returns>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.SqlRulesResourceString">
            <summary>
              A strongly-typed resource class, for looking up localized strings, etc.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.SqlRulesResourceString.ResourceManager">
            <summary>
              Returns the cached ResourceManager instance used by this class.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.SqlRulesResourceString.Culture">
            <summary>
              Overrides the current thread's CurrentUICulture property for all
              resource lookups using this strongly typed resource class.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.SqlRulesResourceString.DataTypeCompatibility_ProblemDescription">
            <summary>
              Looks up a localized string similar to Data types of {0}({1}) and {2}({3}) are incompatible..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.SqlRulesResourceString.DataTypeCompatibility_ProblemDescription_CompatibleCasting">
            <summary>
              Looks up a localized string similar to Expression is cast from {0} to {1}..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.SqlRulesResourceString.DataTypeCompatibility_ProblemDescription_DataLossCasting">
            <summary>
              Looks up a localized string similar to Data loss might occur when casting from {0} to {1}..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.SqlRulesResourceString.DataTypeCompatibility_ProblemDescription_ExplicitConversionReqruied">
            <summary>
              Looks up a localized string similar to Data types of {0} and {1} are not implicitly compatible. You must use the CONVERT or CAST function..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.SqlRulesResourceString.DataTypeCompatibility_ProblemDescription_IncompatibleCasting">
            <summary>
              Looks up a localized string similar to Data types of {0} and {1} are incompatible..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.SqlRulesResourceString.DataTypeCompatibility_ProblemDescription_IncorrectDataType">
            <summary>
              Looks up a localized string similar to The following data type is not valid in this context: {0}.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.SqlRulesResourceString.DataTypeCompatibility_RuleName">
            <summary>
              Looks up a localized string similar to Maintain compatibility between data types..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.SqlRulesResourceString.ExtractDeterministicFunctionCall_ProblemDescription">
            <summary>
              Looks up a localized string similar to Deterministic function call ({0}) might cause an unnecessary table scan..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.SqlRulesResourceString.ExtractDeterministicFunctionCall_RuleName">
            <summary>
              Looks up a localized string similar to Extract deterministic function calls from WHERE predicates..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.SqlRulesResourceString.Identity_ProblemDescription">
            <summary>
              Looks up a localized string similar to Potential misuse of system function @@IDENTITY..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.SqlRulesResourceString.Identity_RuleName">
            <summary>
              Looks up a localized string similar to Consider using SCOPE_IDENTITY instead of @@IDENTITY..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.SqlRulesResourceString.LikePercent_ProblemDescription">
            <summary>
              Looks up a localized string similar to Avoid using patterns that start with &quot;%&quot; in LIKE predicates.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.SqlRulesResourceString.LikePercent_RuleName">
            <summary>
              Looks up a localized string similar to Avoid using patterns that start with “%” in LIKE predicates..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.SqlRulesResourceString.MoveColumnToOneside_ProblemDescription">
            <summary>
              Looks up a localized string similar to A column in an expression to be compared in a predicate might cause a table scan and degrade performance..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.SqlRulesResourceString.MoveColumnToOneside_RuleName">
            <summary>
              Looks up a localized string similar to In the comparison, simplify the expression that includes indexed columns..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.SqlRulesResourceString.NonIndexedColumnFromInPredicate_ProblemDescription">
            <summary>
              Looks up a localized string similar to A column without an index that is used as an IN predicate test expression might degrade performance..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.SqlRulesResourceString.NonIndexedColumnFromInPredicate_RuleName">
            <summary>
              Looks up a localized string similar to Avoid using columns that do not have an index as test expressions in IN predicates..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.SqlRulesResourceString.NullableColumn_ProblemDescription">
            <summary>
              Looks up a localized string similar to Nullable columns can cause final results to be evaluated as NULL for the predicate..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.SqlRulesResourceString.NullableColumn_RuleName">
            <summary>
              Looks up a localized string similar to Use ISNULL(column, default value) on nullable columns in expressions..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.SqlRulesResourceString.OldStyleJoinSyntax_ProblemDescription">
            <summary>
              Looks up a localized string similar to Old-style JOIN syntax is used..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.SqlRulesResourceString.OldStyleJoinSyntax_RuleName">
            <summary>
              Looks up a localized string similar to Avoid using deprecated syntax when you join tables or views..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.SqlRulesResourceString.PopulateOutputParameters_ProblemDescription">
            <summary>
              Looks up a localized string similar to Output parameter ({0}) is not populated in all code paths..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.SqlRulesResourceString.PopulateOutputParameters_RuleName">
            <summary>
              Looks up a localized string similar to Specify values for output parameters in all code paths..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.SqlRulesResourceString.ReservedWordsForTypeName_FutureKeyword">
            <summary>
              Looks up a localized string similar to A future keyword.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.SqlRulesResourceString.ReservedWordsForTypeName_Keyword">
            <summary>
              Looks up a localized string similar to A keyword.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.SqlRulesResourceString.ReservedWordsForTypeName_OdbcKeyword">
            <summary>
              Looks up a localized string similar to An ODBC keyword.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.SqlRulesResourceString.ReservedWordsForTypeName_ProblemDescription">
            <summary>
              Looks up a localized string similar to {0}({1}) is used as a type name..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.SqlRulesResourceString.ReservedWordsForTypeName_RuleName">
            <summary>
              Looks up a localized string similar to Avoid using reserved words for type names..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.SqlRulesResourceString.SelectAsterisk_ProblemDescription">
            <summary>
              Looks up a localized string similar to The shape of the result set produced by a SELECT * statement will change if the underlying table or view structure changes..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.SqlRulesResourceString.SelectAsterisk_RuleName">
            <summary>
              Looks up a localized string similar to Avoid SELECT * in stored procedures, views, and table-valued functions..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.SqlRulesResourceString.SmallVariableLengthTypes_OneElement">
            <summary>
              Looks up a localized string similar to one element.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.SqlRulesResourceString.SmallVariableLengthTypes_ProblemDescription">
            <summary>
              Looks up a localized string similar to Avoid {0} of only {1}..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.SqlRulesResourceString.SmallVariableLengthTypes_RuleName">
            <summary>
              Looks up a localized string similar to Avoid using types of variable length that are size 1 or 2..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.SqlRulesResourceString.SmallVariableLengthTypes_TwoOrMoreElements">
            <summary>
              Looks up a localized string similar to {0} elements.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.SqlRulesResourceString.SpecialCharactersInObjectName_ProblemDescription">
            <summary>
              Looks up a localized string similar to Object name({0}) contains special characters..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.SqlRulesResourceString.SpecialCharactersInObjectName_RuleName">
            <summary>
              Looks up a localized string similar to Avoid using special characters in object names..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.SqlRulesResourceString.SpPrefixForStoredProcedures_ProblemDescription">
            <summary>
              Looks up a localized string similar to Stored procedure({0}) includes sp_ prefix in its name..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Rules.SqlRulesResourceString.SpPrefixForStoredProcedures_RuleName">
            <summary>
              Looks up a localized string similar to Avoid using sp_ as a prefix for stored procedures..
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.Internal.TsqlScriptDomUtils">
            <summary>
            Utility class for TransactSql.ScriptDom functionality. These functions will not be
            part of the public API, but they may be added to the public samples project so that users can
            understand how we use the ScriptDom APIs for writing rules.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Internal.TsqlScriptDomUtils.IsSubroutineViewOrTrigger(Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment)">
            <summary>
            Checks if a fragment represents the body of a subroutine, a view, 
            or a trigger. These have similar characteristics, for instance the ability to
            include select statements against tables. 
            </summary>
            <param name="fragment"><see cref="T:Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment"/> representing part of a TSQL object definition</param>
            <returns>true if this is a subroutine, a view or a trigger body</returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Internal.TsqlScriptDomUtils.RemoveParenthesis(Microsoft.SqlServer.TransactSql.ScriptDom.ScalarExpression)">
            <summary>
            recursively remove parenthesises of an TSql parser expression
            </summary>
            <param name="expression">Expression to parse</param>
            <returns>Expression without parenthesis</returns>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.CodeAnalysis.SqlCodeAnalysisConstants.StaticCodeAnalysisProblemCategory">
            <summary>
            Error category for static code analysis
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.Engine.MefRuleEngineResources">
            <summary>
              A strongly-typed resource class, for looking up localized strings, etc.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Engine.MefRuleEngineResources.ResourceManager">
            <summary>
              Returns the cached ResourceManager instance used by this class.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Engine.MefRuleEngineResources.Culture">
            <summary>
              Overrides the current thread's CurrentUICulture property for all
              resource lookups using this strongly typed resource class.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Engine.MefRuleEngineResources.ElementsListFormat">
            <summary>
              Looks up a localized string similar to {0}, {1}.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Engine.MefRuleEngineResources.InvalidRuleStatusPrefix">
            <summary>
              Looks up a localized string similar to Invalid prefix for rule key: {0}. Ignored..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Engine.MefRuleEngineResources.MissingSupportedElements">
            <summary>
              Looks up a localized string similar to Rule &apos;{0}&apos; in assembly &apos;{1}&apos; was ignored because it is missing SupportedElementTypes. This is required for Element scope rules.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Engine.MefRuleEngineResources.NoSupportedElementsFound">
            <summary>
              Looks up a localized string similar to Rule &apos;{0}&apos; in assembly &apos;{1}&apos; was ignored because it has no SupportedElementTypes that are top-level types. Only top-level types are processed during analysis. The following types were ignored: [{2}].
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Engine.MefRuleEngineResources.UnsupportedElementsFound">
            <summary>
              Looks up a localized string similar to Rule &apos;{0}&apos; in assembly &apos;{1}&apos; has one or more SupportedElementTypes that are not top-level types. These following types will be ignored during analysis: [{2}].
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.Engine.RuleEngine">
            <summary>
            Responsible for executing rules against a SQLModel.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Engine.RuleEngine.ExecuteRules(Microsoft.SqlServer.Dac.Model.TSqlModel,System.Collections.Generic.IList{Microsoft.SqlServer.Dac.Extensibility.ExtensibilityError}@)">
            <summary>
            Execute all enabled rules against the specified model and each model element found in the model
            </summary>
            <param name="schemaModel">The model against which the rules are executed</param>
            <param name="errors">The errors that occurred when executing rules</param>
            <returns>The problems detected by executing the rules</returns>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Engine.RuleEngine.AllRuleDescriptions">
            <summary>
            Used for testing purposes
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Engine.RuleEngine.ModelRuleDescriptions">
            <summary>
            Used for testing purposes
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Engine.RuleEngine.ElementRuleDescriptions">
            <summary>
            Used for testing purposes
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Engine.RuleLoader`1.CreateStandardProperties">
            <summary>
            Creates a <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.Engine.EngineProperties"/> that uses standard extension lookup 
            properties and returns this to the caller
            </summary>
            <returns><see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.Engine.EngineProperties"/></returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Engine.RuleLoader`1.SetRuleStoreFactory(Microsoft.SqlServer.Dac.CodeAnalysis.Engine.IRuleStoreFactory{`0})">
            <summary>
            For testing purposes only - injects a new rulestore factory for use when finding rules
            </summary>
            <param name="factory"></param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Engine.RuleLoader`1.#ctor(Microsoft.SqlServer.Dac.CodeAnalysis.Engine.EngineProperties)">
            <summary>
            Initializes the <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.Engine.RuleLoader`1"/> 
            </summary>
            <param name="engineProperties"><see cref="T:Microsoft.SqlServer.Dac.Extensibility.CompositionProperties"/> defining how rules should be loaded</param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Engine.RuleLoader`1.GetAllRules(System.Collections.Generic.IList{Microsoft.SqlServer.Dac.Extensibility.ExtensibilityError}@)">
            <summary>
            Gets all rules.
            </summary>
            <param name="typeLoadErrors">Output <see cref="T:System.Collections.Generic.List`1"/> containing all errors that occurred during load. This will include general load errors
            for all contributors on the machine, plus load errors relating to version mismatch between requested contributor version
            and the available contributors on the machine</param>
            <returns></returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Engine.RuleLoader`1.CreateRuleEngine(System.Collections.Generic.IList{Microsoft.SqlServer.Dac.Extensibility.ExtensibilityError}@)">
            <summary>
            Creates a RuleEngine.
            </summary>
            <param name="errors">Errors found while processing rules - are there duplicate rules or rules that do not include required metadata</param>
            <returns></returns>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.Engine.IRuleStore">
            <summary>
            A RuleStore that stores analysis rules and their metadata. Rules are accessible in their original form
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Engine.IRuleStore.GetRuleDescriptors(System.Collections.Generic.IList{Microsoft.SqlServer.Dac.Extensibility.ExtensibilityError}@)">
            <summary>
            Gets the Code Analysis rules and their metadata wrapped inside RuleDescriptorImpl objects. The EngineProperties are used to
            filter rules by platform and to run a rule descriptor updater (if present), which can flag the rule as enabled/disabled
            and update the severity 
            </summary>
            <param name="errors">Errors found while processing rules - are there duplicate rules or rules that do not include required metadata</param>
            <returns></returns>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.Engine.RuleStore">
            <summary>
            For now only ISqlCodeAnalysisRule is supported via MEF - can change in the future if other rule types are required.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Engine.RuleStore.GetRuleDescriptors(System.Collections.Generic.IList{Microsoft.SqlServer.Dac.Extensibility.ExtensibilityError}@)">
            <summary>
            Gets the Code Analysis rules and their metadata wrapped inside RuleDescriptorImpl objects. The EngineProperties are used to
            filter rules by platform and to run a rule descriptor updater (if present), which can flag the rule as enabled/disabled
            and update the severity 
            </summary>
            <param name="errors">Errors found while processing rules - are there duplicate rules or rules that do not include required metadata</param>
            <returns></returns>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.Engine.IRuleStoreFactory`1">
            <summary>
            Factory for loading rules via MEF extensibility. 
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Engine.IRuleStoreFactory`1.CreateRuleStore(Microsoft.SqlServer.Dac.CodeAnalysis.Engine.EngineProperties,System.Collections.Generic.IList{Microsoft.SqlServer.Dac.Extensibility.ExtensibilityError}@)">
            <summary>
            Creates an IRuleStore with rules found by MEF
            </summary>
            <param name="properties">Properties defining the configuration for extensibility loading etc</param>
            <param name="errors">Errors found while loading rule extensions </param>
            <returns></returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Engine.RuleStoreFactory`1.SetExtensionManagerFactory(Microsoft.SqlServer.Dac.Extensibility.IExtensionManagerFactory)">
            <summary>
            For testing purposes only - injects a new IExtensionManagerFactory which supplies types
            </summary>
            <param name="factory"></param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Engine.SourceCodePositionProvider.TryGetSourceInformation(Microsoft.SqlServer.Dac.Model.TSqlObject,Microsoft.SqlServer.Dac.SourceInformation@)">
            <summary>
            Tries to find source information for a given TSqlObject
            </summary>
            <returns>true if source information was found</returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.Engine.SourceCodePositionProvider.TryGetSourceInformation(Microsoft.SqlServer.Dac.Model.TSqlObject,Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment,Microsoft.SqlServer.Dac.SourceInformation@)">
            <summary>
            Tries to find source information for a given TSqlObject
            </summary>
            <returns>true if source information was found</returns>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblemSuppressionContext">
            <summary>
            The context information for suppressing a SCA problem
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblemSuppressionContext.#ctor(Microsoft.SqlServer.Dac.CodeAnalysis.RuleDescriptor,Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblem,Microsoft.SqlServer.Dac.Model.TSqlModel)">
            <summary>
            Initialize a new instance of SqlRuleProblemSuppressionContext
            </summary>
            <param name="rule">The Rule detecting the problem</param>
            <param name="problem">The problem</param>
            <param name="schemaModel">The Schema Model being analyzed</param>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblemSuppressionContext.ModelElement">
            <summary>
            The element for which a problem was discovered
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblemSuppressionContext.SchemaModel">
            <summary>
            The Schema Model the rule is checking against
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblemSuppressionContext.Problem">
            <summary>
            The <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblem"/> discovered by an analysis rule
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblemSuppressionContext.Rule">
            <summary>
            The Rule detecting the problem
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.Engine.EngineProperties">
            <summary>
            Properties to use when creating a rules engine. 
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Engine.EngineProperties.RuleSettingsString">
            <summary>
            Optional string that can be used to disable rules
            and set rule severity
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Engine.EngineProperties.SuppressProblem">
            <summary>
            The predicate to suppress problems detected by a rule against an element
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.Engine.EngineProperties.ExecuteCanceled">
            <summary>
            Callback function that tests whether to abort executing rules
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.ScaResources">
            <summary>
              A strongly-typed resource class, for looking up localized strings, etc.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.ScaResources.ResourceManager">
            <summary>
              Returns the cached ResourceManager instance used by this class.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.ScaResources.Culture">
            <summary>
              Overrides the current thread's CurrentUICulture property for all
              resource lookups using this strongly typed resource class.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.ScaResources.CodeAnalysis_ModelIsNotScriptBacked">
            <summary>
              Looks up a localized string similar to Static Code Analysis: Some rules may not run as expected because the model being analyzed does not contain scripts representing your schema objects. When analyzing code from a data source such as a Dacpac it is recommended that the source should be loaded as script-backed model to ensure correct rule operation.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.ScaResources.CodeAnalysisTask_Error">
            <summary>
              Looks up a localized string similar to Error.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.ScaResources.CodeAnalysisTask_InvalidElement">
            <summary>
              Looks up a localized string similar to {0} elements are in an error state.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.ScaResources.CodeAnalysisTask_MultipleProblemsFound">
            <summary>
              Looks up a localized string similar to Static Code Analysis: {0} problems have been detected..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.ScaResources.CodeAnalysisTask_NoProblemsFound">
            <summary>
              Looks up a localized string similar to Static Code Analysis: No problems have been detected..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.ScaResources.CodeAnalysisTask_OneProblemFound">
            <summary>
              Looks up a localized string similar to Static Code Analysis: One problem has been detected..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.ScaResources.CodeAnalysisTask_ProblemFormat">
            <summary>
              Looks up a localized string similar to {0}: {1}.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.ScaResources.CodeAnalysisTask_ResultsSavedIn">
            <summary>
              Looks up a localized string similar to The results are saved in {0}..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.ScaResources.SqlCodeAnalysisTask_Unknown">
            <summary>
              Looks up a localized string similar to Unknown.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.ScaResources.SqlCodeAnalysisTask_Warning">
            <summary>
              Looks up a localized string similar to Warning.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleExecutionContext">
            <summary>
            Defines the fields necessary for analysis, including the schema model and 
            model element to analyze.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleExecutionContext.SchemaModel">
            <summary>
            The <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/> being analyzed.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleExecutionContext.ModelElement">
            <summary>
            The <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> being analyzed.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleExecutionContext.RuleDescriptor">
            <summary>
            Describes the rule being executed, and can be used to access the 
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleExecutionContext.ScriptFragment">
            <summary>
            Gets the script fragment which defines the element being analyzed, if this is available. 
            May be null. 
            
            Tries to get the most suitable <see cref="T:Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment"/> for use during the rule analysis process.
            If the TSqlObject was originally built from a scripted source then the original source fragment will be returned.
            Otherwise a new AST will be generated from the <see cref="P:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleExecutionContext.ModelElement"/>/&gt;.
            This ensures that when reporting <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblem"/>s the most accurate source information can be included
            in the error messages. 
            </summary>
            <remarks>
            See <see cref="M:Microsoft.SqlServer.Dac.TSqlModelUtils.TryGetFragmentForAnalysis(Microsoft.SqlServer.Dac.Model.TSqlObject,Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment@)"/> for implementation details
            </remarks>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblem">
            <summary>
            Describes a problem found by a rule during analysis. Contains relevant information
            such as the Rule that found the problem, the SqlObject causing the problem, 
            the severity, and the error message to display.
            
            Source position information (source name, start line and column) are initially inferred based on
            the <see cref="P:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblem.ModelElement"/> and <see cref="P:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblem.Fragment"/> passed into the constructor. Note that if
            a <see cref="P:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblem.Fragment"/> is passed in then the start line/column for that <see cref="T:Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment"/>
            will be used (if present), otherwise the <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/>'s values will be used (if present).
            Note that certain models such as those generated from a dacpac may not have source position
            information.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblem.#ctor(System.String,Microsoft.SqlServer.Dac.Model.TSqlObject)">
            <summary>
            Constructs a new <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblem"/>. Source position information
            (source name, start line and column) is inferred based on the <paramref name="modelElement"/>
            parameter, as long as this information is present in the model.
            </summary>
            <param name="description">Description of the problem</param>
            <param name="modelElement">The element that caused the problem  </param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblem.#ctor(System.String,Microsoft.SqlServer.Dac.Model.TSqlObject,Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment)">
            <summary>
            Constructs a new <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblem"/>. Source position information
            (source name, start line and column) is inferred based on the <paramref name="modelElement"/>
            and <paramref name="fragment"/> parameters, as long as this information is present in the model.
            </summary>
            <param name="description">Description of the problem</param>
            <param name="modelElement">The element that caused the problem</param>
            <param name="fragment"><see cref="T:Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment"/> specifying the precise </param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblem.SetSourceInformation(Microsoft.SqlServer.Dac.SourceInformation)">
            <summary>
            Sets source position information (source name, start line and column) for this <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblem"/>,
            overriding any position information inferred when the rule was created. 
            </summary>
            <param name="sourceInformation"><see cref="T:Microsoft.SqlServer.Dac.SourceInformation"/> specifying the values to set for the
            <see cref="P:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblem.SourceName"/>, <see cref="P:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblem.StartLine"/> and <see cref="P:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblem.StartColumn"/> fields</param>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblem.Rule">
            <summary>
            Description of the rule used to detect the current problem. Does not need to be set by the rule itself
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblem.RuleId">
            <summary>
            Id of the rule that created this <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblem"/>
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblem.ModelElement">
            <summary>
            The <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> causing the current problem
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblem.Fragment">
            <summary>
            <see cref="T:Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment"/> causing the problem
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblem.Description">
            <summary>
            Problem description
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblem.Severity">
            <summary>
            The severity of this problem, can be error, warning.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblem.ErrorMessageString">
            <summary>
            The string for displaying the error message, based on rule information
            and the problem description
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblem.SourceName">
            <summary>
            Name of the source this problem was found in. This is determined based on the 
            model element passed into the constructor. May be null if no source information
            was available. For instance models loaded from Dacpac files may not have source
            information available
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblem.StartLine">
            <summary>
            The line the problem begins at, if known
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblem.StartColumn">
            <summary>
            The column the problem begins at, if known
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblemSeverity">
            <summary>
            The type of message for reporting problems
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblemSeverity.Unknown">
            <summary>
            Unknown severity
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblemSeverity.Warning">
            <summary>
            Warning
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblemSeverity.Error">
            <summary>
            Error
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleScope">
            <summary>
            The scope examined by a static code analysis rule.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleScope.Element">
            <summary>
            The rule examines a single element.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleScope.Model">
            <summary>
            The rule examines the entire model.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.CodeAnalysis.SuppressedProblemInfo">
            <summary>
            Information about a problem being suppressed for a particular source. 
            This information includes the source name and the rule whose problems should be suppressed.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.SuppressedProblemInfo.#ctor(System.String,Microsoft.SqlServer.Dac.CodeAnalysis.RuleConfiguration)">
            <summary>
            Creates a <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.SuppressedProblemInfo"/> for a given source name and rule
            </summary>
            <param name="sourceName">
            Name of the source to be suppressed. This is commonly the path to a file on disk.
            </param>
            <param name="rule">Information about the rule whose problems should be suppressed</param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.SuppressedProblemInfo.Equals(System.Object)">
            <summary>
            <see cref="M:System.Object.Equals(System.Object)"/>
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.CodeAnalysis.SuppressedProblemInfo.GetHashCode">
            <summary>
            <see cref="M:System.Object.GetHashCode"/>
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.SuppressedProblemInfo.SourceName">
            <summary>
            Gets the name of the source to be suppressed. This is commonly the path to a file on disk.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.CodeAnalysis.SuppressedProblemInfo.Rule">
            <summary>
            Gets a <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.RuleConfiguration"/> with information about the rule 
            whose problems should be suppressed
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Compare.DacSchemaComparisonMessage">
            <summary>
            Represents a problem encountered during schema comparison.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.DacSchemaComparisonMessage.Exception">
            <summary>
            Exception associated with the error, or null
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Compare.SchemaCompareApiResources">
            <summary>
              A strongly-typed resource class, for looking up localized strings, etc.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaCompareApiResources.ResourceManager">
            <summary>
              Returns the cached ResourceManager instance used by this class.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaCompareApiResources.Culture">
            <summary>
              Overrides the current thread's CurrentUICulture property for all
              resource lookups using this strongly typed resource class.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaCompareApiResources.ComparisonResultStateDoesNotAllowPublish">
            <summary>
              Looks up a localized string similar to Performing publish is not possible for this comparison result..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaCompareApiResources.ComparisonResultStateDoesNotAllowScriptGeneration">
            <summary>
              Looks up a localized string similar to Performing script generation is not possible for this comparison result..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaCompareApiResources.InvalidConnectionString">
            <summary>
              Looks up a localized string similar to The specified connection string is not valid..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaCompareApiResources.OperationFailedDueToAnUnexpectedException">
            <summary>
              Looks up a localized string similar to The operation failed..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaCompareApiResources.OperationFailedDueToException0">
            <summary>
              Looks up a localized string similar to The operation failed. The error was: {0}.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaCompareApiResources.OperationFailedDueToSourceDrift">
            <summary>
              Looks up a localized string similar to The operation could not continue because the source database was modified after schema comparison was completed..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaCompareApiResources.OperationFailedDueToSourceModelErrors">
            <summary>
              Looks up a localized string similar to The operation could not continue because the source model contains errors..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaCompareApiResources.OperationFailedDueToTargetDrift">
            <summary>
              Looks up a localized string similar to The operation could not continue because the target database was modified after schema comparison was completed..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaCompareApiResources.OperationFailedDueToTargetModelErrors">
            <summary>
              Looks up a localized string similar to The operation could not continue because the target model contains errors..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaCompareApiResources.Path0DoesntContainValidScmpFile">
            <summary>
              Looks up a localized string similar to The path &apos;{0}&apos; does not contain a valid schema compare file (.scmp file)..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaCompareApiResources.SchemaComparisonOnlySupportsDacpacAndDatabase">
            <summary>
              Looks up a localized string similar to SchemaComparison only supports database and dacpac endpoint types..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaCompareApiResources.UnableToDeserializeScmpFile">
            <summary>
              Looks up a localized string similar to The specified file could not be opened as a schema comparison file.  The file might be corrupt or it might refer to a target or source endpoint that is not of type database or dacpac. Only database endpoints and dacpac endpoints are supported..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaCompareApiResources.UpdateScriptsForDacpacsRequireDbName">
            <summary>
              Looks up a localized string similar to A non-empty database name must be specified in order to generate an update script for a SchemaCompareDacpacEndpoint..
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Compare.SchemaCompareEndpoint">
            <summary>
            Refers to a source or target for schema comparison
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Compare.SchemaCompareDacpacEndpoint">
            <summary>
            Refers to a dacpac file as either a source or target for schema comparison
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Compare.SchemaCompareDacpacEndpoint.#ctor(System.String)">
            <summary>
            Constructs a schema compare endpoint that refers to a dacpac file
            </summary>
            <param name="dacpacFilePath">Path to a dacpac file</param>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaCompareDacpacEndpoint.FilePath">
            <summary>
            The dacpac file path
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Compare.SchemaCompareDatabaseEndpoint">
            <summary>
            Refers to a database as either a source or target for schema comparison
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Compare.SchemaCompareDatabaseEndpoint.#ctor(System.String)">
            <summary>
            Constructs a schema compare endpoint that refers to a database
            </summary>
            <param name="connectionString">A connection string to a database instance</param>
            <exception cref="T:System.ArgumentNullException">The supplied connection string is null.</exception>
            <exception cref="T:System.FormatException">Invalid value within the connection string (for example, when a Boolean or numeric value was expected but not supplied).</exception>
            <exception cref="T:System.ArgumentException">The supplied connectionString is not valid.</exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Compare.SchemaCompareDatabaseEndpoint.#ctor(System.String,System.Security.SecureString)">
            <summary>
            Constructs a schema compare endpoint that refers to a database
            </summary>
            <param name="connectionString">A connection string to a database instance</param>
            <param name="password"><see cref="T:System.Security.SecureString"/> that supplies the password for the database connection used by this instance.</param>
            <exception cref="T:System.ArgumentNullException">The supplied connection string or password is null.</exception>
            <exception cref="T:System.FormatException">Invalid value within the connection string (for example, when a Boolean or numeric value was expected but not supplied).</exception>
            <exception cref="T:System.ArgumentException">The supplied connectionString is not valid.</exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Compare.SchemaCompareDatabaseEndpoint.#ctor(Microsoft.Data.Tools.Schema.Common.SqlClient.SqlConnectionFactory)">
            <summary>
            Constructs a schema compare endpoint that refers to a database
            </summary>
            <param name="connectionFactory">A connection string to a database instance</param>
            <exception cref="T:System.ArgumentNullException">The supplied connection factory is null.</exception>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaCompareDatabaseEndpoint.DatabaseName">
            <summary>
            The database name
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Compare.SchemaComparison">
            <summary>
            Class that allows comparing schema between two types of entities: databases and dacpac files
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Compare.SchemaComparison.#ctor(System.String)">
            <summary>
            SchemaComparison constructor that uses a schema compare file (.scmp file) for
            all comparison settings.  Only dacpac and/or database endpoints may be compared.
            </summary>
            <param name="scmpFilePath">The path to a schema compare file (.scmp file)</param>
            <exception cref="T:System.ArgumentException">If either the source or the target endpoint is neither a database nor a dacpac file.</exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Compare.SchemaComparison.#ctor(Microsoft.SqlServer.Dac.Compare.SchemaCompareEndpoint,Microsoft.SqlServer.Dac.Compare.SchemaCompareEndpoint)">
            <summary>
            SchemaComparison constructor that takes endpoints that specify the source and target for comparison.
            </summary>
            <param name="source">A <see cref="T:Microsoft.SqlServer.Dac.Compare.SchemaCompareEndpoint"/> that refers to a schema source.</param>
            <param name="target">An <see cref="T:Microsoft.SqlServer.Dac.Compare.SchemaCompareEndpoint"/> that refers to a target.  Comparison will update the target to match the source.</param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Compare.SchemaComparison.Compare">
            <summary>
            Performs schema comparison, populating comparison results.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Compare.SchemaComparison.SaveToFile(System.String,System.Boolean)">
            <summary>
            Saves the SchemaComparison as an scmp file.
            </summary>
            <param name="filePath"></param>
            <param name="overwrite">When true, any existing file at filePath will be overwritten. If false, save will throw an
            IOException if a file already exists at filePath.</param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Compare.SchemaComparison.SaveToStream(System.IO.Stream)">
            <summary>
            Saves the SchemaComparison as an scmp file into a stream
            </summary>
            <param name="stream">A stream that supports writing.</param>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaComparison.Source">
            <summary>
            The <see cref="T:Microsoft.SqlServer.Dac.Compare.SchemaCompareEndpoint"/> that refers to a schema source.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaComparison.Target">
            <summary>
            The <see cref="T:Microsoft.SqlServer.Dac.Compare.SchemaCompareEndpoint"/> that refers to a target.  Comparison will update the target to match the source.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaComparison.ExcludedSourceObjects">
            <summary>
            Elements in the source database model to exclude from comparison.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaComparison.ExcludedTargetObjects">
            <summary>
            Elements in the target database model to exclude from comparison.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaComparison.Options">
            <summary>
            Options that affect the behavior of package deployment.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Compare.SchemaDifferenceType">
            <summary>
            Represents the different possible types of <see cref="T:Microsoft.SqlServer.Dac.Compare.SchemaDifference"/>
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Compare.SchemaDifferenceType.Object">
            <summary>
            A model object (for example: column, parameter)
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Compare.SchemaDifferenceType.Property">
            <summary>
            A property of a model object (for example: Name, Collation)
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Compare.SchemaComparisonResult">
            <summary>
            Class that provides information about the differences between a source and target database.
            Differences are represented in a tree structure.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Compare.SchemaComparisonResult.Include(Microsoft.SqlServer.Dac.Compare.SchemaDifference)">
            <summary>
            Used to try to include a difference as part of the set of update actions that are scripted or published.
            </summary>
            <param name="node">The tree node to (possibly) modify</param>
            <returns>Returns true if, after completion, the node's state is included</returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Compare.SchemaComparisonResult.Exclude(Microsoft.SqlServer.Dac.Compare.SchemaDifference)">
            <summary>
            Used to try to exclude a difference as part of the set of update actions that are scripted or published.
            </summary>
            <param name="node">The tree node to (possibly) modify</param>
            <returns>Returns true if, after completion, the node's state is not included</returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Compare.SchemaComparisonResult.GetErrors">
            <summary>
            Provides an enumeration of errors that prevent successful schema compare operations.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Compare.SchemaComparisonResult.GenerateScript(System.String)">
            <summary>
            Generates a T-SQL update script that makes the target schema consistent with the source schema.
            </summary>
            <param name="databaseName">The name of the target database.</param>
            <returns>SchemaCompareScriptGenerationResult </returns>
            <exception cref="T:System.ArgumentException">If the target is a dacpac and a null or empty databaseName value was provided.</exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Compare.SchemaComparisonResult.PublishChangesToTarget">
            <summary>
            Generates and then executes a T-SQL update script that makes the target schema consistent with the source schema.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaComparisonResult.IsValid">
            <summary>
            Indicates whether comparison resulted in a valid, usable result
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaComparisonResult.IsEqual">
            <summary>
            Indicates whether the source and target endpoints are equal
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaComparisonResult.SourceModel">
            <summary>
            The source database model
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaComparisonResult.TargetModel">
            <summary>
            The target database model
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaComparisonResult.Differences">
            <summary>
            A tree that contains results of schema comparison of source and target endpoints.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Compare.SchemaCompareScriptGenerationResult">
            <summary>
            Result of generating scripts
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaCompareScriptGenerationResult.Script">
            <summary>
            The generated script
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaCompareScriptGenerationResult.MasterScript">
            <summary>
            When needed (e.g. for Azure SQL Database), a separate script to be executed against the master database on the target server
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaCompareScriptGenerationResult.Success">
            <summary>
            Indicates whether generating the script was successful.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaCompareScriptGenerationResult.Message">
            <summary>
            Provides context information in the event of an error.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaCompareScriptGenerationResult.Exception">
            <summary>
            Provides error information in the event of an exception.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Compare.SchemaComparePublishResult">
            <summary>
            Result of publishing comparison result
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaComparePublishResult.Script">
            <summary>
            The generated script
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaComparePublishResult.MasterScript">
            <summary>
            When needed (e.g. for Azure SQL Database), a separate script to be executed against the master database on the target server
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaComparePublishResult.Success">
            <summary>
            Indicates whether generating the script was successful.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaComparePublishResult.Errors">
            <summary>
            Any errors encountered while publishing
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Compare.SchemaDifference">
            <summary>
            Represents an object or property difference found during comparison of two database models.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaDifference.DifferenceType">
            <summary>
            Represents the type of this <see cref="T:Microsoft.SqlServer.Dac.Compare.SchemaDifference"/> node
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaDifference.UpdateAction">
            <summary>
            The update action required to make the schema of the target equal to the source schema.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaDifference.Included">
            <summary>
            Indicates whether this node and all of its children will be included during script generation or publish of the comparison result.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaDifference.IsExcludable">
            <summary>
            Indicates whether this node can be excluded from script generation and publish of the comparison result.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaDifference.Parent">
            <summary>
            The parent difference (of type <see cref="F:Microsoft.SqlServer.Dac.Compare.SchemaDifferenceType.Object"/>), if any, of this difference
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaDifference.Children">
            <summary>
            Object or property differences, if any, that relate to this difference.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaDifference.SourceObject">
            <summary>
            Object from the source database model
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaDifference.TargetObject">
            <summary>
            Object from the target database model
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaDifference.Name">
            <summary>
            Node name
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Compare.SchemaComparisonExcludedObjectId">
            <summary>
            Represents an object by name and type for use in <see cref="T:Microsoft.SqlServer.Dac.Compare.SchemaComparison"/> operations.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Compare.SchemaComparisonExcludedObjectId.#ctor(Microsoft.SqlServer.Dac.Model.ModelTypeClass,Microsoft.SqlServer.Dac.Model.ObjectIdentifier)">
            <summary>
            Constructs an identifier that refers to an object by type and name.
            </summary>
            <param name="typeClass">The type of an object</param>
            <param name="identifier">The ObjectIdentifier (name) of an object</param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Compare.SchemaComparisonExcludedObjectId.#ctor(Microsoft.SqlServer.Dac.Model.ModelTypeClass,Microsoft.SqlServer.Dac.Model.ObjectIdentifier,Microsoft.SqlServer.Dac.Model.ModelTypeClass,Microsoft.SqlServer.Dac.Model.ObjectIdentifier)">
            <summary>
            Constructs an identifier that refers to an object by type and name.
            </summary>
            <param name="typeClass">The type of an object</param>
            <param name="identifier">The ObjectIdentifier (name) of an object</param>
            <param name="parentTypeClass">The type of the parent object. This is used to refer to an unnamed object by reference to its (named) parent.</param>
            <param name="parentIdentifier">The name of the parent object. This is used to refer to an unnamed object by reference to its (named) parent.</param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Compare.SchemaComparisonExcludedObjectId.#ctor(System.String,Microsoft.SqlServer.Dac.Model.ObjectIdentifier)">
            <summary>
            Constructs an identifier that refers to an object by type and name.
            </summary>
            <param name="typeName">The type name used by schema comparison</param>
            <param name="identifier">The possibly null ObjectIdentifier (name) of an object</param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Compare.SchemaComparisonExcludedObjectId.#ctor(System.String,Microsoft.SqlServer.Dac.Model.ObjectIdentifier,System.String,Microsoft.SqlServer.Dac.Model.ObjectIdentifier)">
            <summary>
            Constructs an identifier that refers to an object by type and name.
            </summary>
            <param name="typeName">The type name used by schema comparison</param>
            <param name="identifier">The possibly null ObjectIdentifier (name) of an object</param>
            <param name="parentTypeName">The type name of the parent object. This is used to refer to an unnamed object by reference to its (named) parent.</param>
            <param name="parentIdentifier">The name of the parent object. This is used to refer to an unnamed object by reference to its (named) parent.</param>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaComparisonExcludedObjectId.TypeName">
            <summary>
            The type name used by schema comparison
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaComparisonExcludedObjectId.Identifier">
            <summary>
            Specifies the name of an object
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaComparisonExcludedObjectId.ParentTypeName">
            <summary>
            The type name of the parent object. This is used to refer to an unnamed object by reference to its (named) parent.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Compare.SchemaComparisonExcludedObjectId.ParentIdentifier">
            <summary>
            Specifies the name of the parent object. This is used to refer to an unnamed object by reference to its (named) parent.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Compare.SchemaUpdateAction">
            <summary>
            Represents a schema update action
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Compare.SchemaUpdateAction.Delete">
            <summary>
            Delete - removing an object from the database
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Compare.SchemaUpdateAction.Change">
            <summary>
            Change - modifying an object in the database
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Compare.SchemaUpdateAction.Add">
            <summary>
            Add - adding an object to the database
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.DacPackageExtensions">
            <summary>
            Provides extension methods to support manipulation of DacPackage objects.
            These extension methods work on an existing <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/>
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacPackageExtensions.UpdateModel(Microsoft.SqlServer.Dac.DacPackage,Microsoft.SqlServer.Dac.Model.TSqlModel,Microsoft.SqlServer.Dac.PackageMetadata)">
            <summary>
            Updates the model in a <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/>, replacing the current model with a new one.
            
            Before updating, the model will be validated and if errors are encountered a <see cref="T:Microsoft.SqlServer.Dac.DacServicesException"/> 
            will be thrown. If callers wish to block on warnings as well as errors, they must validate the model by calling
            <see cref="M:Microsoft.SqlServer.Dac.Model.TSqlModel.Validate"/> and checking if any errors or warnings are included in the messages returned.
            
            Note: only the model is replaced - all other artifacts such as refactor log, pre-deployment script,
            post-deployment script and and contributor artifacts are not altered. If any of these artifacts
            rely on elements that are no longer in the updated model then deployment may fail. It is the 
            responsibility of the caller to ensure that these artifacts are consistent with the new model.
            The <see cref="T:System.IO.Packaging.Package"/> API can be used to update other artifacts such as the refactor log and scripts
            and keep them consistent with the updated model.
            These artifacts are stored as package parts and are identified by their URI. 
            Package parts can be examined using <see cref="M:System.IO.Packaging.Package.GetParts"/>. Please refer to the 
            <see cref="T:System.IO.Packaging.Package"/> API for further information about updating package parts.
            
            </summary>
            <param name="dacPackage"><see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> to be updated</param>
            <param name="newModel"><see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/> representing the model to save into the package.</param>
            <param name="packageMetadata"><see cref="T:Microsoft.SqlServer.Dac.PackageMetadata"/> describing the name, version and description to use
            for the <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/>, or null if the package information should remain the same. </param>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">If the <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> contains data.</exception>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">If there are any errors saving the model to the package,
            including errors validating the model.
            </exception>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">If the <paramref name="dacPackage"/> was not loaded with <see cref="F:System.IO.FileAccess.ReadWrite"/>.</exception>
            <exception cref="T:System.ArgumentNullException">If the <paramref name="dacPackage"/> or <paramref name="newModel"/> parameters are null.</exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacPackageExtensions.BuildPackage(System.String,Microsoft.SqlServer.Dac.Model.TSqlModel,Microsoft.SqlServer.Dac.PackageMetadata)">
            <summary>
            Creates a package with the specified <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/> and saves it to the specified location.
            </summary>
            <param name="packageFilePath">Path to the package file.</param>
            <param name="model"><see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/> representing the model to save into the package.</param>
            <param name="packageMetadata">Metadata information that describes the package.</param>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">If there are any errors during package serialization, including errors validating the model.</exception>
            <exception cref="T:System.ArgumentNullException">If the <paramref name="packageFilePath"/> or <paramref name="model"/> parameters are null.</exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacPackageExtensions.BuildPackage(System.String,Microsoft.SqlServer.Dac.Model.TSqlModel,Microsoft.SqlServer.Dac.PackageMetadata,Microsoft.SqlServer.Dac.PackageOptions)">
            <summary>
            Creates a package with the specified <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/> and saves it to the specified location.
            In addition to the <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/>, other artifacts such as refactor log and deployment contributors can be specified in <paramref name="packageOptions"/>.
            </summary>
            <param name="packageFilePath">Path to the package file.</param>
            <param name="model"><see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/> representing the model to save into the package.</param>
            <param name="packageMetadata">Metadata information that describes the package.</param>
            <param name="packageOptions"><see cref="T:Microsoft.SqlServer.Dac.PackageOptions"/> defining advanced options and additional artifacts.</param>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">If there are any errors during package serialization, including errors validating the model.</exception>
            <exception cref="T:System.ArgumentNullException">If the <paramref name="packageFilePath"/> or <paramref name="model"/> parameters are null.</exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacPackageExtensions.BuildPackage(System.IO.Stream,Microsoft.SqlServer.Dac.Model.TSqlModel,Microsoft.SqlServer.Dac.PackageMetadata)">
            <summary>
            Creates a package with the specified <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/> and saves it to the specified <see cref="T:System.IO.Stream"/>.
            </summary>
            <param name="stream"><see cref="T:System.IO.Stream"/> to which the package content will be serialized.</param>
            <param name="model"><see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/> representing the model to save into the package.</param>
            <param name="packageMetadata">Metadata information that describes the package.</param>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">If there are any errors during package serialization, including errors validating the model.</exception>
            <exception cref="T:System.ArgumentNullException">If the <paramref name="stream"/> or <paramref name="model"/> parameters are null.</exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacPackageExtensions.BuildPackage(System.IO.Stream,Microsoft.SqlServer.Dac.Model.TSqlModel,Microsoft.SqlServer.Dac.PackageMetadata,Microsoft.SqlServer.Dac.PackageOptions)">
            <summary>
            Creates a package with the specified <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/> and saves it to the specified <see cref="T:System.IO.Stream"/>.
            In addition to the <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/>, other artifacts such as refactor log and deployment contributors can be specified in <paramref name="packageOptions"/>.
            </summary>
            <param name="stream"><see cref="T:System.IO.Stream"/> to which the package content will be serialized.</param>
            <param name="model"><see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/> representing the model to save into the package.</param>
            <param name="packageMetadata">Metadata information that describes the package.</param>
            <param name="packageOptions"><see cref="T:Microsoft.SqlServer.Dac.PackageOptions"/> defining advanced options and additional artifacts.</param>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">If there are any errors during package serialization, including errors validating the model.</exception>
            <exception cref="T:System.ArgumentNullException">If the <paramref name="stream"/> or <paramref name="model"/> parameters are null.</exception>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.BuildContributor">
            <summary>
            Derivatives of the BuildContributor extension are executed during a 
            project build after the project's model has been constructed and verified.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.BuildContributor.OnExecute(Microsoft.SqlServer.Dac.Deployment.BuildContributorContext,System.Collections.Generic.IList{Microsoft.SqlServer.Dac.Extensibility.ExtensibilityError})">
            <summary>
            Called after the project's model has been completely built giving the build
            contributor an opportunity to examine the model and possible output
            additional files.
            </summary>
            <param name="context"><see cref="T:Microsoft.SqlServer.Dac.Deployment.BuildContributorContext"/> object</param>
            <param name="messages">Any messages to be published as part of the build process can be added to this List. 
            May relate to errors or can also be informational</param>
            <exception cref="T:Microsoft.SqlServer.Dac.Deployment.BuildFailedException">This type of exception should be thrown if the build cannot continue.</exception>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.BuildContributorContext">
            <summary>
            Provides the context for the build process that is used by <see cref="T:Microsoft.SqlServer.Dac.Deployment.BuildContributor"/> objects
            during project build. See documentation for the <see cref="P:Microsoft.SqlServer.Dac.Deployment.BuildContributorContext.Arguments"/> and <see cref="P:Microsoft.SqlServer.Dac.Deployment.BuildContributorContext.ExtensionFiles"/>
            properties for information on how to specify these inside a project file.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.BuildContributorContext.#ctor(System.Collections.Generic.Dictionary{System.String,System.Object},System.Collections.Generic.Dictionary{System.String,System.String},Microsoft.SqlServer.Dac.Model.TSqlModel,Microsoft.Build.Framework.ITaskItem[])">
            <summary>
            Initializes a new instance of the <see cref="T:Microsoft.SqlServer.Dac.Deployment.BuildContributorContext"/> class.
            </summary>
            <param name="buildProperties">A <see cref="T:System.Collections.Generic.Dictionary`2"/> of named property values. Canno be null</param>
            <param name="arguments">A <see cref="T:System.Collections.Generic.Dictionary`2"/> of command-line arguments and values. Cannot be null.</param>
            <param name="buildModel">A reference to the <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/> of the project. Cannot be null.</param>
            <param name="extensionFiles">An array of <see cref="T:Microsoft.Build.Framework.ITaskItem"/> objects.</param>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.BuildContributorContext.BuildProperties">
            <summary>
            Gets a dictionary of named properties and their values
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.BuildContributorContext.Arguments">
            <summary>
            Gets a dictionary of command-line arguments and their values.
            When building in SSDT, arguments are available when found in a .sqlproj file or a referenced .targets file. 
            For instance to add a "RunMyContributor" argument with a value of 
            "true", the following would be added:
            
            &lt;PropertyGroup&gt;
                &lt;ContributorArguments Condition="'$(Configuration)' == 'Debug''"&gt;
                    $(ContributorArguments);RunMyContributor=True;
                &lt;/ContributorArguments&gt;
            &lt;/PropertyGroup&gt;
            
            
            In this case the argument is only added for Debug configuration.
            Using the above configuration it is possible to collect information from the MSBuild environment
            and pass it to the contributor. 
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.BuildContributorContext.Model">
            <summary>
            Gets the <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/> of the project
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.BuildContributorContext.ExtensionFiles">
            <summary>
            Gets an array of <see cref="T:Microsoft.Build.Framework.ITaskItem"/> representing 
            Files from the project system which influence the build contributors.
            
            Input configuration files can be defined in a .sqlproj file as part of the MSBuild process. 
            Inside a .sqproj file, Build Configuration files are specified as follows:
            
            &lt;ItemGroup&gt;
              &lt;BuildExtensionConfiguration Include="MyContributorName.MyFileName1.sql" /&gt;
              &lt;BuildExtensionConfiguration Include="MyContributorName.MyFileName2.sql" /&gt;
            &lt;/ItemGroup&gt;
            
            
            Note that configuration files are accessible to all contributors. Contributors may employ a
            file naming pattern to identify which input files related to that contributor.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.BuildFailedException">
            <summary>
            A BuildFailedException should be thrown to indicate that the build cannot continue.
            This will stop the build process.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.BuildFailedException.#ctor(System.String)">
            <summary>
            Constructs a <see cref="T:Microsoft.SqlServer.Dac.Deployment.BuildFailedException"/> with a string exception message
            </summary>
            <param name="message">string describing the cause of the failure</param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.BuildFailedException.#ctor(System.String,System.Exception)">
            <summary>
            Constructs a <see cref="T:Microsoft.SqlServer.Dac.Deployment.BuildFailedException"/> with a string exception message
            and an inner <see cref="T:System.Exception"/> providing more information about the failure
            </summary>
            <param name="message">string describing the cause of the failure</param>
            <param name="innerException"><see cref="T:System.Exception"/> that is the root cause of the failure</param>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.ContributorArgumentConfiguration">
            <summary>
            Instances of this class are created by Build and Deployment contributors during design-time to 
            initialize arguments that are passed to them at runtime. 
            
            In SSDT, these arguments must be specified using a ContributorArguments property
            in a .sqlproj file or a referenced .targets file. For instance to add a "RunMyContributor" argument with a value of 
            "true", the following would be added:
            &lt;PropertyGroup&gt;
                &lt;ContributorArguments Condition="'$(Configuration)' == 'Debug''"&gt;
                    $(ContributorArguments);RunMyContributor=True;
                &lt;/ContributorArguments&gt;
            &lt;PropertyGroup&gt;
            
            
            In this case the argument is only added for Debug configuration.
            Using the above configuration it is possible to collect information from the MSBuild environment
            and pass it to the contributor. 
            
            It is also possible to specify these when creating a package by using <see cref="M:Microsoft.SqlServer.Dac.DacPackageExtensions.BuildPackage(System.String,Microsoft.SqlServer.Dac.Model.TSqlModel,Microsoft.SqlServer.Dac.PackageMetadata,Microsoft.SqlServer.Dac.PackageOptions)"/> 
            and specifying <see cref="T:Microsoft.SqlServer.Dac.PackageOptions"/>.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.ContributorArgumentConfiguration.#ctor">
            <summary>
            Initializes a new instance of the <see cref="T:Microsoft.SqlServer.Dac.Deployment.ContributorArgumentConfiguration"/> class.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.ContributorArgumentConfiguration.#ctor(System.String,System.String)">
            <summary>
            Initializes a new instance of the <see cref="T:Microsoft.SqlServer.Dac.Deployment.ContributorArgumentConfiguration"/> class.
            </summary>
            <param name="name">The name of the argument.</param>
            <param name="value">The value of the argument.</param>
            <exception cref="T:System.ArgumentNullException">If the <paramref name="name"/> or <paramref name="value"/> parameters are null</exception>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.ContributorArgumentConfiguration.Name">
            <summary>
            Gets or sets the name of the argument.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.ContributorArgumentConfiguration.Value">
            <summary>
            Gets or sets the value of the argument expressed as a string.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.DeploymentContributorConfigurationStream">
            <summary>
            Represents a streamable version of a configuration file that is used by DacFx in the deployment and build processes. 
            These streams enable deployment extensions to enhance and extend the design and deployment experience.
            
            Input configuration files can be defined in a .sqlproj file as part of the MSBuild process.
            The files are treated as streams, and will be passed to contributors
            via the <see cref="M:Microsoft.SqlServer.Dac.Deployment.DeploymentContributor.EstablishDeploymentConfiguration(Microsoft.SqlServer.Dac.Deployment.DeploymentContributorConfigurationSetup)"/> method, where they can
            be copied as outputs that are stored in the generated dacpac. 
            
            These streams will then be made available 
            in the <see cref="M:Microsoft.SqlServer.Dac.Deployment.DeploymentContributor.ApplyDeploymentConfiguration(Microsoft.SqlServer.Dac.Deployment.DeploymentContributorContext,System.Collections.Generic.ICollection{Microsoft.SqlServer.Dac.Deployment.DeploymentContributorConfigurationStream})"/>, where they can be
            consumed for configuration and data during deployment. At the end of the 
            <see cref="M:Microsoft.SqlServer.Dac.Deployment.DeploymentContributor.ApplyDeploymentConfiguration(Microsoft.SqlServer.Dac.Deployment.DeploymentContributorContext,System.Collections.Generic.ICollection{Microsoft.SqlServer.Dac.Deployment.DeploymentContributorConfigurationStream})"/> method all streams will be disposed. 
            Contributors that need to obtain data from the streams must read and cache the data during this method -
            attempts to read from the stream during the <see cref="M:Microsoft.SqlServer.Dac.Deployment.DeploymentPlanContributor.OnExecute(Microsoft.SqlServer.Dac.Deployment.DeploymentPlanContributorContext)"/> method
            will fail.
            
            Inside a .sqproj file, Deployment Configuration files are specified as follows:
            &lt;ItemGroup&gt;
              &lt;DeploymentExtensionConfiguration Include="MyContributorName.MyFileName1.sql" /&gt;
              &lt;DeploymentExtensionConfiguration Include="MyContributorName.MyFileName2.sql" /&gt;
            &lt;/ItemGroup&gt;
            
            Note that configuration streams are accessible to all contributors. Contributors may employ a
            file naming pattern to identify which input files related to that contributor.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.DeploymentContributorConfigurationStream.#ctor(System.String)">
            <summary>
            Creates an instance of the <see cref="T:Microsoft.SqlServer.Dac.Deployment.DeploymentContributorConfigurationStream"/>
            </summary>
            <param name="filePath">A file path for which a stream can be created</param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.DeploymentContributorConfigurationStream.GetStream">
            <summary>
            Gets the <see cref="T:System.IO.Stream"/>
            </summary>
            <returns><see cref="T:System.IO.Stream"/></returns>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.DeploymentContributorConfigurationStream.Filename">
            <summary>
            The filename used to represent this stream
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.DeploymentContributorInformation">
            <summary>
            Information that identifies a deployment contributor
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.DeploymentContributorInformation.ExtensionId">
            <summary>
            Id of the extension that implements the 
            deployment contributor
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.DeploymentContributorInformation.Version">
            <summary>
            Version of the deployment contributor extension (optional).
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.DeploymentStepInternal">
            <summary>
            Base class for implementing deployment step types.
            It should not be used for writing extensions. Extensions
            must directly implement DeploymentStep
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.DeploymentStep">
            <summary>
            Represents a step in a deployment plan.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.DeploymentStep.ToString">
            <summary>
            Returns a string that describes this step.  The base returns the
            type of the step
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.DeploymentStep.GenerateTSQL">
            <summary>
            Returns a list of strings that represent a set of TSQL script batches to be applied
            during deployment
            </summary>
            <returns></returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.DeploymentStep.GenerateBatchScript(System.IO.TextWriter)">
            <summary>
            Helper that writes the set of batch scripts to the provided writer
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.DeploymentStep.Next">
            <summary>
            Gets the next step in the container, which is a <see cref="T:System.Collections.Generic.LinkedListNode`1"/> of type DeploymentStep.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.DeploymentStep.Previous">
            <summary>
            Gets the previous step in the container, which is a <see cref="T:System.Collections.Generic.LinkedListNode`1"/> of type DeploymentStep.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.DeploymentStepInternal.#ctor">
            <summary>
            Internal custructor as class is meant for internal purpose
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.DeploymentStepInternal.#ctor(Microsoft.Data.Tools.Schema.Sql.Deployment.DeploymentStep)">
            <summary>
            Internal custructor as class is meant for internal purpose
            </summary>
            <param name="internalStep"></param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.DeploymentStepInternal.GenerateTSQL">
            <summary>
            Returns a list of strings that represent a set of TSQL script batches to be applied
            during deployment
            </summary>
            <returns></returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.DeploymentStepInternal.ToString">
            <summary>
            Returns a string that describes this step.  The base returns the
            type of the step
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.AlterElementStep">
            <summary>
            A step in a deployment plan that represent an alter to an element. 
            This class is for read-only purpose and cannot be instantiated.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.DeploymentScriptDomStep">
            <summary>
            Base class for script based deployment steps.
            Represents a deployment step that consists of an Abstract Syntax Tree (AST) and reference to a script Domain Object Model (DOM) generator.
            This class is for read-only purpose.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.DeploymentScriptDomStep.Message">
            <summary>
            Gets an optional message describing the step
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.DeploymentScriptDomStep.IsMessageInFirstBatch">
            <summary>
            Returns true if the step's message will be the first batch when calling
            GenerateTSql()
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.DeploymentScriptDomStep.Script">
            <summary>
            Gets the script for this step.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.DeploymentScriptDomStep.ScriptGenerator">
            <summary>
            Gets the ScriptGenerator for this step
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.AlterElementStep.SourceElement">
            <summary>
            Get the source element in the alter step
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.AlterElementStep.TargetElement">
            <summary>
            Gets the target element in the alter step
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.BeginPostDeploymentScriptStep">
            <summary>
            A step in the deployment plan that represents script deployment at the beginning the post-deployment.
            This class is for read-only purpose and cannot be instantiated.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.EmptyStep">
            <summary>
            Represents an empty step in deployment plan.
            This class is for read-only purpose and cannot be instantiated.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.BeginPreDeploymentScriptStep">
            <summary>
             A step in the deployment plan that represents script deployment at the beginning of pre-deployment.
             This class is for read-only purpose and cannot be instantiated.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.CreateElementStep">
            <summary>
            The step in a deployment plan that represents a create of an element.
            This class is for read-only purpose and cannot be instantiated.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.CreateElementStep.SourceElement">
            <summary>
            Get the source element of the create element step
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.DacBulkCopyStep">
            <summary>
            The DacBulkCopyStep uploads / streams data from the dac package to the target db.
            This class is for read-only purpose and cannot be instantiated.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.DacDeleteFromTablesStep">
            <summary>
            The step in deployment plan that represents delete from table.
            This class is for read-only purpose and cannot be instantiated.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.DacDropSystemVersioningStep">
            <summary>
            The step in deployment plan that represents drop of a temporal system-versioning clause
            and system-time PERIOD.
            This class is for read-only purpose and cannot be instantiated.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.DacRestoreSystemVersioningStep">
            <summary>
            The step in deployment plan that represents creation of a temporal system-versioning clause
            and system-time PERIOD on the appropriate temporal columns.
            This class is for read-only purpose and cannot be instantiated.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.SqlAddSystemVersioningStep">
            <summary>
            The step in deployment plan that represents creation of a temporal system-versioning clause
            and system-time PERIOD on the appropriate temporal columns.
            This class is for read-only purpose and cannot be instantiated.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.SqlDropSystemVersioningStep">
            <summary>
            The step in deployment plan that represents drop of a temporal system-versioning clause
            and system-time PERIOD.
            This class is for read-only purpose and cannot be instantiated.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.DacDropTemporalSchemaBoundElementStep">
            <summary>
            The step in deployment plan that represents drop of an temporal table schema-bound objects
            This class is for read-only purpose and cannot be instantiated.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.DacDisableForeignKeysStep">
            <summary>
            The step in deployment plan that represents disabling foreign keys.
            This class is for read-only purpose and cannot be instantiated.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.DacRestoreConstraintsStep">
            <summary>
            The step in deployment plan that represents restoring constraints.
            This class is for read-only purpose and cannot be instantiated.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.DacSaveConstraintsStep">
            <summary>
            The step in deployment plan that represents saving constraints.
            This class is for read-only purpose.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.DeploymentScriptStep">
            <summary>
            The step in deployment plan that represents deploying scripts.
            This class can be instantiated and used by extensions.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.DeploymentScriptStep.#ctor(System.String)">
            <summary>
            Creates an instance of <see cref="T:Microsoft.SqlServer.Dac.Deployment.DeploymentScriptStep"/>
            </summary>
            <param name="text">script to deploy</param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.DeploymentScriptStep.#ctor(System.Collections.Generic.IEnumerable{System.String})">
            <summary>
            Initializes a <see cref="T:Microsoft.SqlServer.Dac.Deployment.DeploymentScriptStep"/> with multiple TSQL scripts
            </summary>
            <param name="batches"><see cref="T:System.Collections.Generic.IEnumerable`1"/> of strings representing
            TSQL scripts</param>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.DropElementStep">
            <summary>
            A step in deployment step that represents dropping a sql object.
            This class is for read-only purpose and cannot be instantiated.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.DropElementStep.TargetElement">
            <summary>
            Gets the target element
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.EndPostDeploymentScriptStep">
            <summary>
            A step in the deployment plan that represents script deployment at the end of post-deployment.
            This class is for read-only purpose and cannot be instantiated.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.EndPreDeploymentScriptStep">
            <summary>
            A step in the deployment plan that represents script deployment at the end of pre-deployment.
            This class is for read-only purpose and cannot be instantiated.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.SqlBeginAltersStep">
            <summary>
            Instances of this class mark the portion of the deployment plan where
            ALTERs (and CREATEs) are performed.
            This class is for read-only purpose and cannot be instantiated.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.SqlBeginDropsStep">
            <summary>
            An instance of this class marks the beginning of the "drops" portion of the
            deployment plan.  Drops occur in the plan before Alters.
            This class is for read-only purpose and cannot be instantiated.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.SqlBeginPreservationStep">
            <summary>
            This class marks the start (in a deployment plan) of the preservation of intent section of the
            plan.  These operations are ones taken to affect refactoring changes.
            This class is for read-only purpose and cannot be instantiated.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.SqlBeginTransactionStep">
            <summary>
            This step marks the beginning of the transactional section of a deployment plan.
            This class is for read-only purpose and cannot be instantiated.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.SqlChangeDatabaseStep">
            <summary>
            The step in deployment step that represents change database.
            This class is for read-only purpose and cannot be instantiated.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlChangeDatabaseStep.DatabaseName">
            <summary>
            Gets the database name
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.SqlCreateDatabaseStep">
            <summary>
            The step in deployment that represents database creation.
            This class is for read-only purpose and cannot be instantiated.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.SqlDropDatabaseStep">
            <summary>
            The step in deployment that represents database drop.
            This class is for read-only purpose and cannot be instantiated.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.SqlCreateTrackingTableStep">
            <summary>
            The step in deployment that represents the creation of the tracking table (__ScriptTrackingLogs).
            This table is used to improve the reliability of deployment to SQL Azure.
            This class is for read-only purpose and cannot be instantiated.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.SqlDropTrackingTableStep">
            <summary>
            The step in deployment that represents drop of the tracking table (__ScriptTrackingLogs).
            This class is for read-only purpose and cannot be instantiated.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.SqlEndAltersStep">
            <summary>
            Instances of this class mark the portion of the deployment plan where
            ALTERs (and CREATEs) are completed.
            This class is for read-only purpose and cannot be instantiated.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.SqlEndDropsStep">
            <summary>
            An instance of this class marks the end of the "drops" portion of the
            deployment plan.
            This class is for read-only purpose and cannot be instantiated.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.SqlEndPreservationStep">
            <summary>
            This class marks the end (in a deployment plan) of the preservation of intent section of the
            plan.  These operations are ones taken to affect refactoring changes.
            This class is for read-only purpose and cannot be instantiated.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.SqlEndTransactionStep">
            <summary>
            This step marks the end of the transactional section of a deployment script.
            This class is for read-only purpose and cannot be instantiated.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.SqlFinalizeDatabaseAccessStep">
            <summary>
            This step is represents a step in the SQL deployment plan that finalizes the access settings to the database.  These
            settings include Read-Only or Read-Write access, restricted, single user or multi-user, and online versus offline.
            This class is for read-only purpose and cannot be instantiated.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.SqlMoveSchemaStep">
            <summary>
            In the deployment plan, instances of this step represent moving the element from a previous schema to
            the new one.
            This class is for read-only purpose and cannot be instantiated.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlMoveSchemaStep.MovedElement">
            <summary>
            Gets the moved element
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlMoveSchemaStep.NewSchema">
            <summary>
            Gets the new schema
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlMoveSchemaStep.PreviousName">
            <summary>
            Gets the previous name
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.SqlPrintStep">
            <summary>
            A type of step in a Sql deployment plan that signifies a SQL "print" statement.
            This class is for read-only purpose and cannot be instantiated.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.SqlRenameStep">
            <summary>
            Represents a step in the deployment plan that renames a element.
            This class is for read-only purpose and cannot be instantiated.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlRenameStep.RenamedElement">
            <summary>
            Gets the renamed object
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlRenameStep.OldName">
            <summary>
            Gets the old name of the object
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlRenameStep.NewName">
            <summary>
            Gets the new name of the object
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.SqlTableMigrationStep">
            <summary>
            Represents a data motion step in a sql deployment plan.
            This class is for read-only purpose and cannot be instantiated.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlTableMigrationStep.SourceTable">
            <summary>
            Gets the source table object
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlTableMigrationStep.TargetTable">
            <summary>
            Gets the target table object
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.SqlColumnEncryptionMigrationStep">
            <summary>
            Represents a data motion step for column encryption in a sql deployment plan.
            This class is for read-only purpose and cannot be instantiated.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlColumnEncryptionMigrationStep.SourceTable">
            <summary>
            Gets the source table object
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlColumnEncryptionMigrationStep.TargetTable">
            <summary>
            Gets the target table object
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.SqlEnableDatabaseChangeTrackingStep">
            <summary>
            Represents a step which will enable change tracking on the database
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.SqlDisableDatabaseChangeTrackingStep">
            <summary>
            Represents a step which will disable change tracking on the database
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.SqlColumnEncryptionSPRefreshStep">
            <summary>
            Represents a step which will execute sp_refresh stored procedures
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.SqlColumnEncryptionRenameToOriginalStep">
            <summary>
            Represents a rename back to original step for column encryption in a sql deployment plan.
            This class is for read-only purpose and cannot be instantiated.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlColumnEncryptionRenameToOriginalStep.SourceTable">
            <summary>
            Gets the source table object
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlColumnEncryptionRenameToOriginalStep.TargetTable">
            <summary>
            Gets the target table object
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.ExportBuildContributorAttribute">
            <summary>
            Concrete classes implementing <see cref="T:Microsoft.SqlServer.Dac.Deployment.BuildContributor"/> must add the 
            <see cref="T:Microsoft.SqlServer.Dac.Deployment.ExportBuildContributorAttribute"/> attribute to their class definition. This ensures 
            they will be detected and available for use during build.
            <see cref="T:Microsoft.SqlServer.Dac.Deployment.BuildContributor"/>s require a unique ID which can be based on their fully qualified type name, or explicitly
            passed as a string
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.ExportBuildContributorAttribute.#ctor(System.String,System.String)">
            <summary>
            Initializes a <see cref="T:Microsoft.SqlServer.Dac.Deployment.ExportBuildContributorAttribute"/>
            </summary>
            <param name="id">Unique Id used to identify the export </param>
            <param name="version">Optional string defining the version number of the extension. 
            Must be a valid version string </param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.ExportBuildContributorAttribute.#ctor(System.Type,System.String)">
            <summary>
            Intializes a <see cref="T:Microsoft.SqlServer.Dac.Deployment.ExportBuildContributorAttribute"/>
            </summary>
            <param name="implementingType">The Concrete type that extends <see cref="T:Microsoft.SqlServer.Dac.Deployment.BuildContributor"/> - this is used
            to generate the unique Id for this Export </param>
            <param name="version">Optional string defining the version number of the extension. 
            Must be a valid version string </param>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.DeploymentPlanExecutor">
            <summary>
            This class represents a deployment constributor that executes the deployment plan.  An
            example of a constributor would be one who executes deployment steps to create a 
            report about actions performed during a deployment
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.DeploymentPlanContributor">
            <summary>
            Represents a contributor to the deployment process
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.DeploymentContributor">
            <summary>
            The base class for deployment contributors.  Subclasses of this class
            participate in a deployment by modifying a deployment plan or by executing
            the plan
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.DeploymentContributor.#ctor">
            <summary>
            Initializes a new instance of the <see cref="T:Microsoft.SqlServer.Dac.Deployment.DeploymentContributor"/> class.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.DeploymentContributor.Dispose">
            <summary>
            Inherited from <see cref="M:System.IDisposable.Dispose"/>
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.DeploymentContributor.Dispose(System.Boolean)">
            <summary>
            
            </summary>
            <param name="disposing"></param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.DeploymentContributor.PublishMessage(Microsoft.SqlServer.Dac.Extensibility.ExtensibilityError)">
            <summary>
            Publishes a message to the deployment engine. The deployment engine will process and report the message to consumers.
            </summary>
            <param name="message">A <see cref="T:Microsoft.SqlServer.Dac.Extensibility.ExtensibilityError"/> that contains the message to publish</param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.DeploymentContributor.OnEstablishDeploymentConfiguration(Microsoft.SqlServer.Dac.Deployment.DeploymentContributorConfigurationSetup)">
            <summary>
            Called by the build process in DacFx to give your code an opportunity to modify deployment configuration.
            </summary>
            <param name="setup">The current <see cref="T:Microsoft.SqlServer.Dac.Deployment.DeploymentContributorConfigurationSetup"/> object.</param>
            <exception cref="T:Microsoft.SqlServer.Dac.Deployment.BuildFailedException">If there is a critical error that should stop the build process
            from continuing, implementing contributors may throw a <see cref="T:Microsoft.SqlServer.Dac.Deployment.BuildFailedException"/>.</exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.DeploymentContributor.OnApplyDeploymentConfiguration(Microsoft.SqlServer.Dac.Deployment.DeploymentContributorContext,System.Collections.Generic.ICollection{Microsoft.SqlServer.Dac.Deployment.DeploymentContributorConfigurationStream})">
            <summary>
            Called by the deployment process in DacFx to give your code an opportunity to collect configuration information from the provided files.
            At the end of the method all streams will be disposed. 
            Contributors that need to obtain data from the streams must read and cache the data during this method -
            attempts to read from the stream during a later method such as the <see cref="M:Microsoft.SqlServer.Dac.Deployment.DeploymentPlanContributor.OnExecute(Microsoft.SqlServer.Dac.Deployment.DeploymentPlanContributorContext)"/> method
            will fail.
            </summary>
            <param name="context">A <see cref="T:Microsoft.SqlServer.Dac.Deployment.DeploymentContributorContext"/> object</param>
            <param name="configurationStreams">An <see cref="T:System.Collections.Generic.ICollection`1"/> of <see cref="T:Microsoft.SqlServer.Dac.Deployment.DeploymentContributorConfigurationStream"/> objects</param>
            <exception cref="T:Microsoft.SqlServer.Dac.Deployment.DeploymentFailedException">If there is a critical error that should stop the deployment process
            from continuing, implementing contributors may throw a <see cref="T:Microsoft.SqlServer.Dac.Deployment.DeploymentFailedException"/>.</exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.DeploymentContributor.Cancel">
            <summary>
            Cancels execution of the contributor
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.DeploymentContributor.Canceled">
            <summary>
            Gets a value that indicates whether the contributor was canceled
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.DeploymentContributor.CancellationToken">
            <summary>
            The <see cref="P:Microsoft.SqlServer.Dac.Deployment.DeploymentContributor.CancellationToken"/> used to indicate whether contributor execution should be canceled
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.DeploymentPlanContributor.OnExecute(Microsoft.SqlServer.Dac.Deployment.DeploymentPlanContributorContext)">
            <summary>
            Called by the deployment engine to allow custom contributors to execute their unique tasks
            </summary>
            <param name="context">A <see cref="T:Microsoft.SqlServer.Dac.Deployment.DeploymentContributorContext"/> object</param>
            <exception cref="T:Microsoft.SqlServer.Dac.Deployment.DeploymentFailedException">If there is a critical error the should stop the deployment process
            from continuing, implementing contributors may throw a <see cref="T:Microsoft.SqlServer.Dac.Deployment.DeploymentFailedException"/>.</exception>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.ExportDeploymentPlanExecutorAttribute">
            <summary>
            Concrete classes implementing <see cref="T:Microsoft.SqlServer.Dac.Deployment.DeploymentPlanExecutor"/> must add the 
            <see cref="T:Microsoft.SqlServer.Dac.Deployment.ExportDeploymentPlanExecutorAttribute"/> attribute to their class definition. This ensures 
            they will be detected and available for use during SQL Deployment.
            <see cref="T:Microsoft.SqlServer.Dac.Deployment.DeploymentPlanExecutor"/>s require a unique ID which can be based on their fully qualified type name, or explicitly
            passed as a string
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.ExportDeploymentPlanExecutorAttribute.#ctor(System.String,System.String)">
            <summary>
            Initializes a <see cref="T:Microsoft.SqlServer.Dac.Deployment.ExportDeploymentPlanExecutorAttribute"/>
            </summary>
            <param name="id">Unique Id used to identify the export </param>
            <param name="version">Optional string defining the version number of the extension. 
            Must be a valid version string </param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.ExportDeploymentPlanExecutorAttribute.#ctor(System.Type,System.String)">
            <summary>
            Intializes a <see cref="T:Microsoft.SqlServer.Dac.Deployment.ExportDeploymentPlanExecutorAttribute"/>
            </summary>
            <param name="implementingType">The Concrete type that extends <see cref="T:Microsoft.SqlServer.Dac.Deployment.DeploymentPlanExecutor"/> - this is used
            to generate the unique Id for this Export </param>
            <param name="version">Optional string defining the version number of the extension. 
            Must be a valid version string </param>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.DeploymentContributorConfigurationSetup">
            <summary>
            Represents the current setup for <see cref="T:Microsoft.SqlServer.Dac.Deployment.DeploymentContributor"/> objects. 
            The setup object can be used by deployment contributors during build operations to cause files 
            to be copied as outputs that are stored in the generated dacpac, or to create new files 
            that are stored in the dacpac. See the <see cref="T:Microsoft.SqlServer.Dac.Deployment.DeploymentContributorConfigurationStream"/> API
            for more information about specifying inputs.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.DeploymentContributorConfigurationSetup.EnumerateInputs">
            <summary>
            Returns an enumerable collection of <see cref="T:Microsoft.SqlServer.Dac.Deployment.DeploymentContributorConfigurationStream"/> objects.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.DeploymentContributorConfigurationSetup.OpenNewOutput(System.String,System.Collections.Generic.IDictionary{System.String,System.String})">
            <summary>
            Returns a new output configuration file stream that is open for read and write.
            </summary>
            <param name="fileName">A partial file name.</param>
            <param name="metadata">The metadata to be saved to the file.</param>
            <returns></returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.DeploymentContributorConfigurationSetup.CopyInputToOutput(Microsoft.SqlServer.Dac.Deployment.DeploymentContributorConfigurationStream)">
            <summary>
            Copies an input stream's contents into an output stream that is stored inside a package
            </summary>
            <param name="stream"><see cref="T:Microsoft.SqlServer.Dac.Deployment.DeploymentContributorConfigurationStream"/> to be copied</param>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.DeploymentContributorConfigurationSetup.Properties">
            <summary>
            Gets a dictionary that contains the current properties and settings.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.DeploymentContributorConfigurationSetup.SqlCmdVariables">
            <summary>
            Gets the SqlCmd variables defined
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.DeploymentContributorContext">
            <summary>
            Provides a context for <see cref="T:Microsoft.SqlServer.Dac.Deployment.DeploymentContributor"/> objects in DacFx
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.DeploymentContributorContext.Arguments">
            <summary>
            Gets or sets a dictionary of named arguments and their values.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.DeploymentContributorContext.Options">
            <summary>
            Gets the options being used for this deployment
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.DeploymentContributorContext.IsAzureSource">
            <summary>
            Does the <see cref="P:Microsoft.SqlServer.Dac.Deployment.DeploymentContributorContext.Source"/> model a SQL Azure database.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.DeploymentContributorContext.IsAzureTarget">
            <summary>
            Does the <see cref="P:Microsoft.SqlServer.Dac.Deployment.DeploymentContributorContext.Target"/> model a SQL Azure database.
            
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.DeploymentContributorContext.Source">
            <summary>
            Gets the Source <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/>
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.DeploymentContributorContext.Target">
            <summary>
            Gets the Target <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/>
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.DeploymentFailedException">
            <summary>
            Represents an exception that occurs during deployment.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.DeploymentFailedException.#ctor">
            <summary>
            Initializes a new instance of the <see cref="T:Microsoft.SqlServer.Dac.Deployment.DeploymentFailedException"/> class
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.DeploymentFailedException.#ctor(System.String)">
            <summary>
            Initializes a new instance of the <see cref="T:Microsoft.SqlServer.Dac.Deployment.DeploymentFailedException"/> class
            </summary>
            <param name="message">Indicates the reason for the exception.</param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.DeploymentFailedException.#ctor(System.String,System.Exception)">
            <summary>
            Initializes a new instance of the <see cref="T:Microsoft.SqlServer.Dac.Deployment.DeploymentFailedException"/> class 
            </summary>
            <param name="message">Indicates the reason for the exception.</param>
            <param name="innerException">Indicates a nested exception.</param>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.DeploymentPlan">
            <summary>
            Represents the plan that is generated for Deployment. 
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.DeploymentPlan.AddFirst(Microsoft.SqlServer.Dac.Deployment.DeploymentStep)">
            <summary>
            
            </summary>
            <param name="newStep"></param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.DeploymentPlan.AddBefore(Microsoft.SqlServer.Dac.Deployment.DeploymentStep,Microsoft.SqlServer.Dac.Deployment.DeploymentStep)">
            <summary>
            
            </summary>
            <param name="step"></param>
            <param name="newStep"></param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.DeploymentPlan.AddAfter(Microsoft.SqlServer.Dac.Deployment.DeploymentStep,Microsoft.SqlServer.Dac.Deployment.DeploymentStep)">
            <summary>
            
            </summary>
            <param name="step"></param>
            <param name="newStep"></param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.DeploymentPlan.AddLast(Microsoft.SqlServer.Dac.Deployment.DeploymentStep)">
            <summary>
            
            </summary>
            <param name="newStep"></param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.DeploymentPlan.AddLast(System.Collections.Generic.IEnumerable{Microsoft.SqlServer.Dac.Deployment.DeploymentStep})">
            <summary>
            
            </summary>
            <param name="steps"></param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.DeploymentPlan.Remove(Microsoft.SqlServer.Dac.Deployment.DeploymentStep)">
            <summary>
            
            </summary>
            <param name="step"></param>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.DeploymentPlan.StepCount">
            <summary>
            Total number of steps in the plan
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.DeploymentPlan.Head">
            <summary>
            Gets the first deployment step
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.DeploymentPlan.Tail">
            <summary>
            Gets the last deployment step
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.DeploymentPlanHandle">
            <summary>
            
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.DeploymentPlanHandle.Head">
            <summary>
            Returns the head on the plan or null if the plan is empty
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.DeploymentPlanHandle.Tail">
            <summary>
            Returns the tail of the plan or null if the plan is empty
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.DeploymentPlanContributorContext">
            <summary>
            Provides a context for <see cref="T:Microsoft.SqlServer.Dac.Deployment.DeploymentPlanContributor"/> objects.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.DeploymentPlanContributorContext.ComparisonResult">
            <summary>
            Gets the <see cref="T:Microsoft.SqlServer.Dac.Deployment.ModelComparisonResult"/>
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.DeploymentPlanContributorContext.PlanHandle">
            <summary>
            Gets the <see cref="T:Microsoft.SqlServer.Dac.Deployment.DeploymentPlanHandle"/>
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.DeploymentPlanContributorContext.DeploymentMasterPath">
            <summary>
            Set if a deployment script is also being generated against an Azure target
            (which requires that the portion executed against master be its own script)
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.DeploymentPlanContributorContext.DeploymentScriptPath">
            <summary>
            Set if a deployment script is also being generated.  This
            enables other deployment contributors to correlate error messages back to a script/file
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.DeploymentPlanModifier">
            <summary>
            Represents a constributor that can modify a deployment plan
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.DeploymentPlanModifier.AddBefore(Microsoft.SqlServer.Dac.Deployment.DeploymentPlanHandle,Microsoft.SqlServer.Dac.Deployment.DeploymentStep,Microsoft.SqlServer.Dac.Deployment.DeploymentStep)">
            <summary>
            Provides a way for subclasses to modify the plan by adding a
            step after the specified step
            </summary>
            <param name="handle">The <see cref="T:Microsoft.SqlServer.Dac.Deployment.DeploymentPlanHandle"/> for the plan</param>
            <param name="step">Identifies the <see cref="T:Microsoft.SqlServer.Dac.Deployment.DeploymentStep"/> before which the <paramref name="newStep"/> will be added.</param>
            <param name="newStep">The <see cref="T:Microsoft.SqlServer.Dac.Deployment.DeploymentStep"/> to be added</param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.DeploymentPlanModifier.AddAfter(Microsoft.SqlServer.Dac.Deployment.DeploymentPlanHandle,Microsoft.SqlServer.Dac.Deployment.DeploymentStep,Microsoft.SqlServer.Dac.Deployment.DeploymentStep)">
            <summary>
            Provides a way to modify the existing plan by adding a step after the existing step
            </summary>
            <param name="handle">The <see cref="T:Microsoft.SqlServer.Dac.Deployment.DeploymentPlanHandle"/> for the plan</param>
            <param name="step">Identifies the <see cref="T:Microsoft.SqlServer.Dac.Deployment.DeploymentStep"/> after which the <paramref name="newStep"/> will be added.</param>
            <param name="newStep">The <see cref="T:Microsoft.SqlServer.Dac.Deployment.DeploymentStep"/> to be added</param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.DeploymentPlanModifier.Remove(Microsoft.SqlServer.Dac.Deployment.DeploymentPlanHandle,Microsoft.SqlServer.Dac.Deployment.DeploymentStep)">
            <summary>
            Provides a way to remove the specified step from the plan
            </summary>
            <param name="handle">The <see cref="T:Microsoft.SqlServer.Dac.Deployment.DeploymentPlanHandle"/> for the plan</param>
            <param name="step">Identifies the <see cref="T:Microsoft.SqlServer.Dac.Deployment.DeploymentStep"/> to be removed.</param>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.ExportDeploymentPlanModifierAttribute">
            <summary>
            Concrete classes implementing <see cref="T:Microsoft.SqlServer.Dac.Deployment.DeploymentPlanModifier"/> must add the 
            <see cref="T:Microsoft.SqlServer.Dac.Deployment.ExportDeploymentPlanModifierAttribute"/> attribute to their class definition. This ensures 
            they will be detected and available for use during SQL Deployment.
            <see cref="T:Microsoft.SqlServer.Dac.Deployment.DeploymentPlanModifier"/>s require a unique ID which can be based on their fully qualified type name, or explicitly
            passed as a string
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.ExportDeploymentPlanModifierAttribute.#ctor(System.String,System.String)">
            <summary>
            Initializes a <see cref="T:Microsoft.SqlServer.Dac.Deployment.ExportDeploymentPlanModifierAttribute"/>
            </summary>
            <param name="id">Unique Id used to identify the export </param>
            <param name="version">Optional string defining the version number of the extension. 
            Must be a valid version string </param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.ExportDeploymentPlanModifierAttribute.#ctor(System.Type,System.String)">
            <summary>
            Intializes a <see cref="T:Microsoft.SqlServer.Dac.Deployment.ExportDeploymentPlanModifierAttribute"/>
            </summary>
            <param name="implementingType">The Concrete type that extends <see cref="T:Microsoft.SqlServer.Dac.Deployment.DeploymentPlanModifier"/> - this is used
            to generate the unique Id for this <see cref="T:Microsoft.SqlServer.Dac.Deployment.DeploymentPlanModifier"/> Export </param>
            <param name="version">Optional string defining the version number of the extension. 
            Must be a valid version string </param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.Internal.ContributorLoader`1.CreateLoader">
            <summary>
            Creates a <see cref="T:Microsoft.SqlServer.Dac.Deployment.Internal.ContributorLoader`1"/> that uses standard extension lookup 
            properties and returns this to the caller
            </summary>
            <returns><see cref="T:Microsoft.SqlServer.Dac.Deployment.Internal.ContributorLoader`1"/></returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.Internal.ContributorLoader`1.#ctor(Microsoft.SqlServer.Dac.Extensibility.CompositionProperties)">
            <summary>
            Initializes the <see cref="T:Microsoft.SqlServer.Dac.Deployment.Internal.ContributorLoader`1"/> 
            </summary>
            <param name="compositionProperties"><see cref="T:Microsoft.SqlServer.Dac.Extensibility.CompositionProperties"/> defining how contributors should be loaded</param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.Internal.ContributorLoader`1.GetMatchingExtensions(System.Collections.Generic.IEnumerable{Microsoft.Data.Tools.Schema.Sql.Deployment.ContributorInfo},System.Collections.Generic.List{Microsoft.SqlServer.Dac.Extensibility.ExtensibilityError}@)">
            <summary>
            Gets all matching extensions for a set of required contributors.
            </summary>
            <param name="requiredContributors"><see cref="T:System.Collections.Generic.IEnumerable`1"/> specifying contributos to load and any version matching requirements</param>
            <param name="typeLoadErrors">Output <see cref="T:System.Collections.Generic.List`1"/> containing all errors that occurred during load. This will include general load errors
            for all contributors on the machine, plus load errors relating to version mismatch between requested contributor version
            and the available contributors on the machine</param>
            <returns></returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.Internal.ContributorLoader`1.GetAllExtensions(System.Collections.Generic.List{Microsoft.SqlServer.Dac.Extensibility.ExtensibilityError}@)">
            <summary>
            Gets all extensions matching the Contributor type.
            </summary>
            <param name="typeLoadErrors">Output <see cref="T:System.Collections.Generic.List`1"/> containing all errors that occurred during load. This will include general load errors
            for all contributors on the machine, plus load errors relating to version mismatch between requested contributor version
            and the available contributors on the machine</param>
            <returns></returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.Internal.ContributorLoader`1.LoadSupportedContributorIds(System.Collections.Generic.IEnumerable{Microsoft.Data.Tools.Schema.Sql.Deployment.ContributorInfo},System.Collections.Generic.Dictionary{System.String,`0}@,System.Collections.Generic.List{Microsoft.SqlServer.Dac.Extensibility.ExtensibilityError}@)">
            <summary>
            Finds and loads all contributors that match the expected <see cref="T:Microsoft.Data.Tools.Schema.Sql.Deployment.ContributorInfo"/> data
            </summary>
            <param name="expectedContributors">Input enumerable of <see cref="T:Microsoft.Data.Tools.Schema.Sql.Deployment.ContributorInfo"/>s defining the contributors being queried</param>
            <param name="loadedContributors"><see cref="T:System.Collections.Generic.Dictionary`2"/> mapping contributor ID to an instance of the contributor</param>
            <param name="loadErrors">Any <see cref="T:Microsoft.SqlServer.Dac.Extensibility.ExtensibilityError"/>s encountered while loading the contributors</param>
            <returns>List of <see cref="T:Microsoft.Data.Tools.Schema.Sql.Deployment.ContributorInfo"/>s describing the contributors that matched the query</returns>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.ModelComparisonChangeDefinitionService">
            <summary>
            Service that provides data about a <see cref="T:Microsoft.SqlServer.Dac.Deployment.ModelComparisonChangeDefinition"/>
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.ModelComparisonResultService">
            <summary>
            Service providing data required for a ModelComparisonResult
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.ModelComparisonResultService.IsEqual">
            <summary>
            If compared elements are equal
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.ModelComparisonResultService.ElementsEqual">
            <summary>
            List of elements that have no changes
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.ModelComparisonResultService.ElementGroupsEqual">
            <summary>
            List of element groups that are equal
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.ModelComparisonResultService.ElementsToAdd">
            <summary>
            List of elements exists in source, does not exist in target
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.ModelComparisonResultService.ElementsToDrop">
            <summary>
            List of elements exists in target, does not exist in source
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.ModelComparisonResultService.ElementsChanged">
            <summary>
            List of elements are changed.
            The result will keyed by elements in source, and it will have
            what are the changes together with that changed element.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.ModelComparisonResultService.ElementsPropertyChanged">
            <summary>
            List of elements changed because of properties are changed.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.ModelComparisonResultService.ElementsRelationshipEntryChanged">
            <summary>
            List of elements changed because of relationship entries are added or dropped
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.ModelComparisonResultService.ElementsComposingChildrenChanged">
            <summary>
            List of elements changed because of composed children are changed.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.ModelComparisonResultService.ElementsHierarchicalChildrenChanged">
            <summary>
            List of elements changed because of hierarchical dhildren are changed.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.Internal.InternalDeploymentContributorHelper`1">
            <summary>
            Helper class that converts and relays calls from Internal <see cref="T:Microsoft.Data.Tools.Schema.Sql.Deployment.DeploymentContributor"/> API
            to public external API
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.Internal.InternalDeploymentContributorHelper`1.ProcessContributorMethodCall(System.String,`0,System.Action{`0})">
            <summary>
            Calls a method on a contributor, handling message passing requirements. 
            Rethrows public <see cref="T:Microsoft.SqlServer.Dac.Deployment.DeploymentFailedException"/>s as internal
            <see cref="T:Microsoft.Data.Tools.Schema.Sql.Deployment.DeploymentFailedException"/>s.
            </summary>
            <param name="contributorId">Id of the contributor to be called </param>
            <param name="contributor">contributor to be called</param>
            <param name="contributorMethodCall">Action that </param>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.Internal.InternalDeploymentPlanContributorHelper`1">
            <summary>
            Helper class that converts and relays calls from Internal <see cref="T:Microsoft.Data.Tools.Schema.Sql.Deployment.DeploymentPlanContributor"/> API
            to public external API
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.Internal.InternalDeploymentPlanExecutor">
            <summary>
            A shim between the public API and the internal DacFx API. Responsible for loading all public DeploymentPlanExecutor contributors, and 
            relaying the calls from the internal API to the public API
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.Internal.InternalDeploymentPlanModifier">
            <summary>
            A shim between the public API and the internal DacFx API. Responsible for loading all public DeploymentPlanModifier contributors, and 
            relaying the calls from the internal API to the public API
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.Internal.InternalDeploymentPlanRelay">
            <summary>
            Acts as a relay between the internal and public DeploymentPlans. Converts
            Internal DeploymentStep objects to Public objects, and vice versa. 
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.Internal.InternalDeploymentPlanRelay.InternalStep">
            <summary>
            Wraps a step from the public API, ensuring it can be used by the internal API
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService">
            <summary>
            Service that provides data about a <see cref="T:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions"/>
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.AllowDropBlockingAssemblies">
            <summary>
            Get boolean that specifies whether CLR deployment will cause blocking assemblies to be dropped.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.AllowIncompatiblePlatform">
            <summary>
            Get boolean that specifies whether deployment will block due to platform compatibility.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.BackupDatabaseBeforeChanges">
            <summary>
            Get boolean that specifies whether a database backup will be performed before proceeding 
            with the actual deployment actions.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.BlockOnPossibleDataLoss">
            <summary>
            Get boolean that specifies whether deployment should stop if the operation could cause data loss.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.BlockWhenDriftDetected">
            <summary>
            Get boolean that specifies whether the system will check for differences between the 
            present state of the database and the registered state of the database and block deployment 
            if changes are detected.  Even if this option is set to true, drift detection will only occur 
            on a database if it was previously deployed with the <see cref="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.RegisterDataTierApplication"/> option enabled.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.CommentOutSetVarDeclarations">
            <summary>
            Get boolean that specifies whether the declaration of SQLCMD variables are commented 
            out in the script header.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.CompareUsingTargetCollation">
            <summary>
            Get boolean that specifies whether the target collation will be used for identifier 
            comparison.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.CreateNewDatabase">
            <summary>
            Get boolean that specifies whether the existing database will be dropped
            and a new database created before proceeding with the actual deployment actions.
            Acquires single-user mode before dropping the existing database.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.DeployDatabaseInSingleUserMode">
            <summary>
            Get boolean that specifies whether the system will acquire single-user mode on the target
            database during the duration of the deployment operation.
            </summary>
            <remarks>
            The database will be returned to multi-user mode after all changes are applied.
            Database may remain in single-user mode if an error occurs during execution.
            </remarks>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.DisableAndReenableDdlTriggers">
            <summary>
            Get boolean that specifies if all DDL triggers will be disabled for the duration of the 
            deployment operation and then re-enabled after all changes are applied.  
            </summary>
            <remarks>
            Triggers may remain disabled if an error occurs during execution.
            </remarks>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.DoNotAlterChangeDataCaptureObjects">
            <summary>
            Get boolean that specifies whether items configured for Change Data Capture (CDC)
            should be altered during deployment.  
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.DoNotAlterReplicatedObjects">
            <summary>
            Get boolean that specifies whether items configured for Replication
            should be altered during deployment.  
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.DropConstraintsNotInSource">
            <summary>
            Get boolean that specifies whether to drop all constraints that do not
            exist in the source model.  
            </summary>
            <remarks>
            This applies to check, default, foreign key, primary key, and unique constraints.
            </remarks>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.DropDmlTriggersNotInSource">
            <summary>
            Get boolean that specifies whether to drop all DML triggers that do not
            exist in the source model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.DropExtendedPropertiesNotInSource">
            <summary>
            Get boolean that specifies whether to drop all extended properties that do 
            not exist in the source model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.DropIndexesNotInSource">
            <summary>
            Get boolean that specifies whether to drop all indexes that do not
            exist in the source model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.DropObjectsNotInSource">
            <summary>
            Get boolean that specifies whether objects that exist in the target but not source should be dropped during deployment.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.DropPermissionsNotInSource">
            <summary>
            Get boolean that specifies whether to drop all permissions that do not
            exist in the source model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.DropRoleMembersNotInSource">
            <summary>
            Get boolean that specifies whether to drop all role memberships that do not
            exist in the source model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.DropStatisticsNotInSource">
            <summary>
            Get boolean that specifies whether to drop all statistics that do not
            exist in the source model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.GenerateSmartDefaults">
            <summary>
            Get boolean that specifies whether default values should be generated to populate NULL columns that are constrained to NOT NULL values.
            </summary>
            <remarks>
            This is useful when needing to add a new NOT NULL column to an existing table with data.
            </remarks>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.IgnoreAnsiNulls">
            <summary>
            Get boolean that specifies whether to exclude the ANSI_NULL option from 
            consideration when comparing the source and target model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.IgnoreAuthorizer">
            <summary>
            Get boolean that specifies whether to exclude the AUTHORIZATION option from 
            consideration when comparing the source and target model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.IgnoreColumnCollation">
            <summary>
            Get boolean that specifies whether to exclude the collation specifier from 
            consideration when comparing the source and target model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.IgnoreColumnOrder">
            <summary>
            Get boolean that specifies whether to exclude from consideration 
            the order of columns in tables when comparing the source and target model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.IgnoreComments">
            <summary>
            Get boolean that specifies whether to exclude comments from 
            consideration when comparing the source and target model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.IgnoreCryptographicProviderFilePath">
            <summary>
            Get boolean that specifies whether to exclude the file specification 
            of a cryptographic provider from consideration when comparing the source and 
            target model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.IgnoreDdlTriggerOrder">
            <summary>
            Get boolean that specifies whether to exclude DDL trigger order from 
            consideration when comparing the source and target model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.IgnoreDdlTriggerState">
            <summary>
            Get boolean that specifies whether to exclude DDL trigger state from 
            consideration when comparing the source and target model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.IgnoreDefaultSchema">
            <summary>
            Get boolean that specifies whether to exclude the DEFAULT_SCHEMA option from 
            consideration when comparing the source and target model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.IgnoreDmlTriggerOrder">
            <summary>
            Get boolean that specifies whether to exclude DML trigger order from 
            consideration when comparing the source and target model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.IgnoreDmlTriggerState">
            <summary>
            Get boolean that specifies whether to exclude DML trigger state from 
            consideration when comparing the source and target model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.IgnoreExtendedProperties">
            <summary>
            Get boolean that specifies whether to exclude all extended properties from 
            consideration when comparing the source and target model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.IgnoreFileAndLogFilePath">
            <summary>
            Get boolean that specifies whether to exclude the FILENAME option of 
            FILE objects from consideration when comparing the source and target model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.IgnoreFilegroupPlacement">
            <summary>
            Get boolean that specifies whether to exclude the filegroup specifier 
            from consideration when comparing the source and target model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.IgnoreFileSize">
            <summary>
            Get boolean that specifies whether to exclude the SIZE option of FILE objects 
            from consideration when comparing the source and target model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.IgnoreFillFactor">
            <summary>
            Get boolean that specifies whether to exclude the FILLFACTOR option
            from consideration when comparing the source and target model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.IgnoreFullTextCatalogFilePath">
            <summary>
            Get boolean that specifies whether to exclude the path specification of 
            FULLTEXT CATALOG objects from consideration when comparing the source and target model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.IgnoreIdentitySeed">
            <summary>
            Get boolean that specifies whether to exclude the seed value of IDENTITY columns 
            from consideration when comparing the source and target model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.IgnoreIncrement">
            <summary>
            Get boolean that specifies whether to exclude the increment value of IDENTITY columns 
            from consideration when comparing the source and target model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.IgnoreIndexOptions">
            <summary>
            Get boolean that specifies whether to exclude differences in index options 
            from consideration when comparing the source and target model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.IgnoreIndexPadding">
            <summary>
            Get boolean that specifies whether to exclude the PAD_INDEX option 
            from consideration when comparing the source and target model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.IgnoreKeywordCasing">
            <summary>
            Get boolean that specifies whether to exclude difference in the casing of keywords 
            from consideration when comparing the source and target model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.IgnoreLockHintsOnIndexes">
            <summary>
            Get boolean that specifies whether to exclude the ALLOW_ROW_LOCKS and 
            ALLOW_PAGE_LOGKS options from consideration when comparing the source and target model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.IgnoreLoginSids">
            <summary>
            Get boolean that specifies whether to exclude the SID option of the LOGIN object 
            from consideration when comparing the source and target model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.IgnoreNotForReplication">
            <summary>
            Get boolean that specifies whether to exclude the NOT FOR REPLICATION option 
            from consideration when comparing the source and target model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.IgnoreObjectPlacementOnPartitionScheme">
            <summary>
            Get boolean that specifies whether to exclude the partition scheme object
            from consideration when comparing the source and target model for the following
            objects: Table, Index, Unique Key, Primary Key, and Queue.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.IgnorePartitionSchemes">
            <summary>
            Get boolean that specifies whether to exclude the parameter type and 
            boundary VALUES of a PARTITION FUNCTION from consideration when comparing the 
            source and target model.  Also excludes FILEGROUP and partition function of a 
            PARTITION SCHEMA from consideration when comparing the source and target model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.IgnorePermissions">
            <summary>
            Get boolean that specifies whether to exclude all permission statements 
            from consideration when comparing the source and target model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.IgnoreQuotedIdentifiers">
            <summary>
            Get boolean that specifies whether to exclude the QUOTED_IDENTIFIER option 
            from consideration when comparing the source and target model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.IgnoreRoleMembership">
            <summary>
            Get boolean that specifies whether to exclude all ROLE MEMBERSHIP objects 
            from consideration when comparing the source and target model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.IgnoreRouteLifetime">
            <summary>
            Get boolean that specifies whether to exclude the LIFETIME option of ROUTE objects 
            from consideration when comparing the source and target model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.IgnoreSemicolonBetweenStatements">
            <summary>
            Get boolean that specifies whether to exclude the existence or absence of semi-colons 
            from consideration when comparing the source and target model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.IgnoreTableOptions">
            <summary>
            Get boolean that specifies whether the options on the target table are updated 
            to match the source table.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.IgnoreUserSettingsObjects">
            <summary>
            Get boolean that specifies whether to exclude user settings 
            from consideration when comparing the source and target model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.IgnoreWhitespace">
            <summary>
            Get boolean that specifies whether to exclude whitespace 
            from consideration when comparing the source and target model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.IgnoreWithNocheckOnCheckConstraints">
            <summary>
            Get boolean that specifies whether to exclude the CHECK|NO CHECK option of a CHECK 
            constraint object from consideration when comparing the source and target model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.IgnoreWithNocheckOnForeignKeys">
            <summary>
            Get boolean that specifies whether to exclude the CHECK|NO CHECK option of a FOREIGN KEY  
            constraint object from consideration when comparing the source and target model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.IncludeCompositeObjects">
            <summary>
            Get boolean that specifies whether to include referenced, external elements that also 
            compose the source model and then update the target database in a single deployment operation.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.IncludeTransactionalScripts">
            <summary>
            Get boolean that specifies whether to use transations during the deployment operation 
            and commit the transaction after all changes are successfully applied.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.NoAlterStatementsToChangeClrTypes">
            <summary>
            Get boolean that specifies whether to force a change to CLR assemblies by dropping and recreating them.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.PopulateFilesOnFileGroups">
            <summary>
            Get boolean that specifies whether files are supplied for filegroups defined in the deployment source.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.RegisterDataTierApplication">
            <summary>
            Get boolean that specifies whether the database will be registered as a Data-Tier Application.  
            If the target database is already a registered Data-Tier Application, then the registration will be updated.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.ScriptDatabaseCollation">
            <summary>
            Get boolean that specifies whether the target database should be altered to match the 
            source model's collation.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.ScriptDatabaseCompatibility">
            <summary>
            Get boolean that specifies whether the target database should be altered to match the 
            source model's compatibility level.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.ScriptDatabaseOptions">
            <summary>
            Get boolean that specifies whether the database options in the target database should 
            be updated to match the source model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.ScriptDeployStateChecks">
            <summary>
            Get boolean that specifies whether the target database should be checked to ensure that 
            it exists, is online and can be updated.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.ScriptFileSize">
            <summary>
            Get boolean that specifies whether a file size is specified when adding files to file groups.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.ScriptNewConstraintValidation">
            <summary>
            Get boolean that specifies whether constraints are validated after all changes are applied.
            </summary>
            <remarks>
            Constraints are always added with NOCHECK option; as a result their validation is skipped during creation.
            </remarks>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.ScriptRefreshModule">
            <summary>
            Get boolean that specifies whether referencing procedures are refreshed when referenced objects are updated.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.TargetConnectionString">
            <summary>
            Get string that specifies the target connection string
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.TargetDatabaseExists">
            <summary>
            Gets boolean that if set specifies whether the target database exists
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.TargetDatabaseName">
            <summary>
            Gets string that specifies the target database name
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.TargetingServerless">
            <summary>
            Get boolean that specifies whether the target server is LocalDB
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.TreatVerificationErrorsAsWarnings">
            <summary>
            Get boolean that specifies whether the deployment operation should proceed when errors are 
            generated during plan verification.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.UnmodifiableObjectWarnings">
            <summary>
            Get boolean that specifies whether the deployment operation should proceed when errors are 
            generated during plan verification.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.VerifyCollationCompatibility">
            <summary>
            Get boolean that specifies whether deployment will verify that the collation specified in the 
            source model is compatible with the collation specified in the target model.
            </summary>
            <value>
            True to continue if errors are generated during plan verification; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.VerifyDeployment">
            <summary>
            Get boolean that specifies whether the plan verification phase is executed or not.
            </summary>
            <value>
            True to perform plan verification; otherwise, false to skip it.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptionsService.SqlCommandVariableValues">
            <summary>
            Get dictionary of SQL command variable values, keyed by variable name.
            </summary>
            <value>
            Dictionary of SQL command variable values, keyed by variable name.
            </value>
            <remarks>
            Valid values must be provided for every variable before deployment, or failures may occur during deployment.
            </remarks>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.ModelComparisonChangeDefinition">
            <summary>
            Contains change details for a TSqlObject.
            Including changed properties, added/dropped/ordinal changed relationship entries,
            added/dropped/changed/ordinal changed composing children and 
            added/dropped/changed/ordinal changed hierarchical children.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.ModelComparisonChangeDefinition.#ctor(Microsoft.SqlServer.Dac.Deployment.ModelComparisonChangeDefinitionService)">
            <summary>
            Constructs a ModelComparisonChangeDefinition that uses a <see cref="T:Microsoft.SqlServer.Dac.Deployment.ModelComparisonChangeDefinitionService"/>
            to retrive definition data
            </summary>
            <param name="definitionService"></param>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.ModelComparisonChangeDefinition.TargetObject">
            <summary>
            Gets the target object of the change definition
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.ModelComparisonResult">
            <summary>
            SchemaModel compare result.
            Contains same elements list, elements needed to add to target list,
            elements needed to drop in target list, and changed elements list.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.ModelComparisonResult.#ctor(Microsoft.SqlServer.Dac.Deployment.ModelComparisonResultService)">
            <summary>
            Constructs a ModelComparisonResult using a <see cref="T:Microsoft.SqlServer.Dac.Deployment.ModelComparisonResultService"/>
            to obtain the result data
            </summary>
            <param name="resultService"></param>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.ModelComparisonResult.IsEqual">
            <summary>
            If compared elements are equal
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.ModelComparisonResult.ElementsEqual">
            <summary>
            List of elements that have no changes
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.ModelComparisonResult.ElementGroupsEqual">
            <summary>
            List of element groups that are equal
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.ModelComparisonResult.ElementsToAdd">
            <summary>
            List of elements exists in source, does not exist in target
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.ModelComparisonResult.ElementsToDrop">
            <summary>
            List of elements exists in target, does not exist in source
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.ModelComparisonResult.ElementsChanged">
            <summary>
            List of elements are changed.
            The result will keyed by elements in source, and it will have
            what are the changes together with that changed element.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.ModelComparisonResult.ElementsPropertyChanged">
            <summary>
            List of elements changed because of properties are changed.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.ModelComparisonResult.ElementsRelationshipEntryChanged">
            <summary>
            List of elements changed because of relationship entries are added or dropped
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.ModelComparisonResult.ElementsComposingChildrenChanged">
            <summary>
            List of elements changed because of composed children are changed.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.ModelComparisonResult.ElementsHierarchicalChildrenChanged">
            <summary>
            List of elements changed because of hierarchical dhildren are changed.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.SchemaDeploymentResources">
            <summary>
              A strongly-typed resource class, for looking up localized strings, etc.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SchemaDeploymentResources.ResourceManager">
            <summary>
              Returns the cached ResourceManager instance used by this class.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SchemaDeploymentResources.Culture">
            <summary>
              Overrides the current thread's CurrentUICulture property for all
              resource lookups using this strongly typed resource class.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SchemaDeploymentResources.DeployPlan_StepDoesNotHaveInternalMapping">
            <summary>
              Looks up a localized string similar to This step has no mapping in the internal deployment plan..
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions">
            <summary>
            Contains deployment options values used for deployment
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.AllowDropBlockingAssemblies">
            <summary>
            Get boolean that specifies whether CLR deployment will cause blocking assemblies to be dropped.
            </summary>
            <value>
            True to drop blocking assemblies during CLR deployment; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.AllowIncompatiblePlatform">
            <summary>
            Get boolean that specifies whether deployment will block due to platform compatibility.
            </summary>
            <value>
            True to block deployment to incompatible platforms; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.BackupDatabaseBeforeChanges">
            <summary>
            Get boolean that specifies whether a database backup will be performed before proceeding 
            with the actual deployment actions.
            </summary>
            <value>
            True to perform a database backup prior to deployment; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.BlockOnPossibleDataLoss">
            <summary>
            Get boolean that specifies whether deployment should stop if the operation could cause data loss.
            </summary>
            <value>
            True to stop deployment if possible data loss if detected; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.BlockWhenDriftDetected">
            <summary>
            Get boolean that specifies whether the system will check for differences between the 
            present state of the database and the registered state of the database and block deployment 
            if changes are detected.  Even if this option is set to true, drift detection will only occur 
            on a database if it was previously deployed with the <see cref="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.RegisterDataTierApplication"/> option enabled.
            </summary>
            <value>
            True to error is drift is detected; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.CommentOutSetVarDeclarations">
            <summary>
            Get boolean that specifies whether the declaration of SQLCMD variables are commented 
            out in the script header.
            </summary>
            <value>
            True to comment out these declarations; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.CompareUsingTargetCollation">
            <summary>
            Get boolean that specifies whether the source collation will be used for identifier 
            comparison.
            </summary>
            <value>
            False to use the source collation; otherwise, true to use the target collation.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.CreateNewDatabase">
            <summary>
            Get boolean that specifies whether the existing database will be dropped
            and a new database created before proceeding with the actual deployment actions.
            Acquires single-user mode before dropping the existing database.
            </summary>
            <value>
            True to drop and re-create the database; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.DeployDatabaseInSingleUserMode">
            <summary>
            Get boolean that specifies whether the system will acquire single-user mode on the target
            database during the duration of the deployment operation.
            </summary>
            <value>
            True to acquire single-user mode during deployment; otherwise, false.
            Default is false.
            </value>
            <remarks>
            The database will be returned to multi-user mode after all changes are applied.
            Database may remain in single-user mode if an error occurs during execution.
            </remarks>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.DisableAndReenableDdlTriggers">
            <summary>
            Get boolean that specifies if all DDL triggers will be disabled for the duration of the 
            deployment operation and then re-enabled after all changes are applied.  
            </summary>
            <value>
            True to disable DDL triggers during deployment; otherwise, false.
            Default is true.
            </value>
            <remarks>
            Triggers may remain disabled if an error occurs during execution.
            </remarks>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.DoNotAlterChangeDataCaptureObjects">
            <summary>
            Get boolean that specifies whether items configured for Change Data Capture (CDC)
            should be altered during deployment.  
            </summary>
            <value>
            True to not alter objects configured for CDC; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.DoNotAlterReplicatedObjects">
            <summary>
            Get boolean that specifies whether items configured for Replication
            should be altered during deployment.  
            </summary>
            <value>
            True to not alter objects configured for Replication; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.DropConstraintsNotInSource">
            <summary>
            Get boolean that specifies whether to drop all constraints that do not
            exist in the source model.  
            </summary>
            <value>
            True to drop constraints not in the source model; otherwise, false.
            Default is true.
            </value>
            <remarks>
            This applies to check, default, foreign key, primary key, and unique constraints.
            </remarks>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.DropDmlTriggersNotInSource">
            <summary>
            Get boolean that specifies whether to drop all DML triggers that do not
            exist in the source model.
            </summary>
            <value>
            True to drop DML triggers not in the source model; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.DropExtendedPropertiesNotInSource">
            <summary>
            Get boolean that specifies whether to drop all extended properties that do 
            not exist in the source model.
            </summary>
            <value>
            True to drop extended properties not in the source model; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.DropIndexesNotInSource">
            <summary>
            Get boolean that specifies whether to drop all indexes that do not
            exist in the source model.
            </summary>
            <value>
            True to drop indexes not in the source model; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.DropObjectsNotInSource">
            <summary>
            Get boolean that specifies whether objects that exist in the target but not source should be dropped during deployment.
            </summary>
            <value>
            True if objects that exist in the target but not source should be dropped; otherwise false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.DropPermissionsNotInSource">
            <summary>
            Get boolean that specifies whether to drop all permissions that do not
            exist in the source model.
            </summary>
            <value>
            True to drop permissions not in the source model; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.DropRoleMembersNotInSource">
            <summary>
            Get boolean that specifies whether to drop all role memberships that do not
            exist in the source model.
            </summary>
            <value>
            True to drop role memberships not in the source model; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.DropStatisticsNotInSource">
            <summary>
            Get boolean that specifies whether to drop all statistics that do not
            exist in the source model.
            </summary>
            <value>
            True to drop statistics not in the source model; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.GenerateSmartDefaults">
            <summary>
            Get boolean that specifies whether default values should be generated to populate NULL columns that are constrained to NOT NULL values.
            </summary>
            <value>
            True if default values should be generated; otherwise false.
            Default is false.
            </value>
            <remarks>
            This is useful when needing to add a new NOT NULL column to an existing table with data.
            </remarks>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.IgnoreAnsiNulls">
            <summary>
            Get boolean that specifies whether to exclude the ANSI_NULL option from 
            consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in the ANSI_NULL option; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.IgnoreAuthorizer">
            <summary>
            Get boolean that specifies whether to exclude the AUTHORIZATION option from 
            consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in the AUTHORIZATION option; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.IgnoreColumnCollation">
            <summary>
            Get boolean that specifies whether to exclude the collation specifier from 
            consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in the collation specifier; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.IgnoreColumnOrder">
            <summary>
            Get boolean that specifies whether to exclude from consideration 
            the order of columns in tables when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in column order; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.IgnoreComments">
            <summary>
            Get boolean that specifies whether to exclude comments from 
            consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in comments; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.IgnoreCryptographicProviderFilePath">
            <summary>
            Get boolean that specifies whether to exclude the file specification 
            of a cryptographic provider from consideration when comparing the source and 
            target model.
            </summary>
            <value>
            True to ignore differences in a cryptographic provider's  file specification; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.IgnoreDdlTriggerOrder">
            <summary>
            Get boolean that specifies whether to exclude DDL trigger order from 
            consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in DDL trigger order; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.IgnoreDdlTriggerState">
            <summary>
            Get boolean that specifies whether to exclude DDL trigger state from 
            consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in DDL trigger state; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.IgnoreDefaultSchema">
            <summary>
            Get boolean that specifies whether to exclude the DEFAULT_SCHEMA option from 
            consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in the DEFAULT_SCHEMA options; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.IgnoreDmlTriggerOrder">
            <summary>
            Get boolean that specifies whether to exclude DML trigger order from 
            consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in DDL trigger order; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.IgnoreDmlTriggerState">
            <summary>
            Get boolean that specifies whether to exclude DML trigger state from 
            consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in DML trigger state; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.IgnoreExtendedProperties">
            <summary>
            Get boolean that specifies whether to exclude all extended properties from 
            consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in extended properties; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.IgnoreFileAndLogFilePath">
            <summary>
            Get boolean that specifies whether to exclude the FILENAME option of 
            FILE objects from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in the FILENAME option of FILE objects; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.IgnoreFilegroupPlacement">
            <summary>
            Get boolean that specifies whether to exclude the filegroup specifier 
            from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in the filegroup specifier; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.IgnoreFileSize">
            <summary>
            Get boolean that specifies whether to exclude the SIZE option of FILE objects 
            from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in the SIZE option of FILE objects; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.IgnoreFillFactor">
            <summary>
            Get boolean that specifies whether to exclude the FILLFACTOR option
            from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in the FILLFACTOR option; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.IgnoreFullTextCatalogFilePath">
            <summary>
            Get boolean that specifies whether to exclude the path specification of 
            FULLTEXT CATALOG objects from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in the path specification of FULLTEXT CATALOG objects; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.IgnoreIdentitySeed">
            <summary>
            Get boolean that specifies whether to exclude the seed value of IDENTITY columns 
            from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in the seed value of IDENTITY columns; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.IgnoreIncrement">
            <summary>
            Get boolean that specifies whether to exclude the increment value of IDENTITY columns 
            from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in the increment value of IDENTITY columns; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.IgnoreIndexOptions">
            <summary>
            Get boolean that specifies whether to exclude differences in index options 
            from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in index options; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.IgnoreIndexPadding">
            <summary>
            Get boolean that specifies whether to exclude the PAD_INDEX option 
            from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in the PAD_INDEX option; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.IgnoreKeywordCasing">
            <summary>
            Get boolean that specifies whether to exclude difference in the casing of keywords 
            from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in the casing of keywords; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.IgnoreLockHintsOnIndexes">
            <summary>
            Get boolean that specifies whether to exclude the ALLOW_ROW_LOCKS and 
            ALLOW_PAGE_LOGKS options from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore the ALLOW_ROW_LOCKS and ALLOW_PAGE_LOGKS options; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.IgnoreLoginSids">
            <summary>
            Get boolean that specifies whether to exclude the SID option of the LOGIN object 
            from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore the SID option of the LOGIN object; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.IgnoreNotForReplication">
            <summary>
            Get boolean that specifies whether to exclude the NOT FOR REPLICATION option 
            from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore the NOT FOR REPLICATION option; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.IgnoreObjectPlacementOnPartitionScheme">
            <summary>
            Get boolean that specifies whether to exclude the partition scheme object
            from consideration when comparing the source and target model for the following
            objects: Table, Index, Unique Key, Primary Key, and Queue.
            </summary>
            <value>
            True to ignore partition schemes; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.IgnorePartitionSchemes">
            <summary>
            Get boolean that specifies whether to exclude the parameter type and 
            boundary VALUES of a PARTITION FUNCTION from consideration when comparing the 
            source and target model.  Also excludes FILEGROUP and partition function of a 
            PARTITION SCHEMA from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore aspects of partition functions and schemes; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.IgnorePermissions">
            <summary>
            Get boolean that specifies whether to exclude all permission statements 
            from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore all permission statements; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.IgnoreQuotedIdentifiers">
            <summary>
            Get boolean that specifies whether to exclude the QUOTED_IDENTIFIER option 
            from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore the QUOTED_IDENTIFIER option; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.IgnoreRoleMembership">
            <summary>
            Get boolean that specifies whether to exclude all ROLE MEMBERSHIP objects 
            from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore ROLE MEMBERSHIP objects; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.IgnoreRouteLifetime">
            <summary>
            Get boolean that specifies whether to exclude the LIFETIME option of ROUTE objects 
            from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore the LIFETIME option of ROUTE objects; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.IgnoreSemicolonBetweenStatements">
            <summary>
            Get boolean that specifies whether to exclude the existence or absence of semi-colons 
            from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore semi-colons; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.IgnoreTableOptions">
            <summary>
            Get boolean that specifies whether the options on the target table are updated 
            to match the source table.
            </summary>
            <value>
            True to ignore difference in table options and not update the target table; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.IgnoreUserSettingsObjects">
            <summary>
            Get boolean that specifies whether to exclude user settings 
            from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in user settings; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.IgnoreWhitespace">
            <summary>
            Get boolean that specifies whether to exclude whitespace 
            from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences whitespace; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.IgnoreWithNocheckOnCheckConstraints">
            <summary>
            Get boolean that specifies whether to exclude the CHECK|NO CHECK option of a CHECK 
            constraint object from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore the CHECK|NO CHECK option of a CHECK constraint object; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.IgnoreWithNocheckOnForeignKeys">
            <summary>
            Get boolean that specifies whether to exclude the CHECK|NO CHECK option of a FOREIGN KEY  
            constraint object from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore the CHECK|NO CHECK option of a FOREIGN KEY constraint object; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.IncludeCompositeObjects">
            <summary>
            Get boolean that specifies whether to include referenced, external elements that also 
            compose the source model and then update the target database in a single deployment operation.
            </summary>
            <value>
            True to include composite objects; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.IncludeTransactionalScripts">
            <summary>
            Get boolean that specifies whether to use transations during the deployment operation 
            and commit the transaction after all changes are successfully applied.
            </summary>
            <value>
            True to use transactions during deployment; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.NoAlterStatementsToChangeClrTypes">
            <summary>
            Get boolean that specifies whether to force a change to CLR assemblies by dropping and recreating them.
            </summary>
            <value>
            True if CLR assemblies should be dropped; otherwise false to allow ALTER statements to change CLR assemblies.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.PopulateFilesOnFileGroups">
            <summary>
            Get boolean that specifies whether files are supplied for filegroups defined in the deployment source.
            </summary>
            <value>
            True to specify files for filegroups; otherwise false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.RegisterDataTierApplication">
            <summary>
            Get boolean that specifies whether the database will be registered as a Data-Tier Application.  
            If the target database is already a registered Data-Tier Application, then the registration will be updated.
            </summary>
            <value>
            True to register the database as a Data-Tier Application; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.ScriptDatabaseCollation">
            <summary>
            Get boolean that specifies whether the target database should be altered to match the 
            source model's collation.
            </summary>
            <value>
            True to alter the target database's collation; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.ScriptDatabaseCompatibility">
            <summary>
            Get boolean that specifies whether the target database should be altered to match the 
            source model's compatibility level.
            </summary>
            <value>
            True to alter the target database's compatibility level; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.ScriptDatabaseOptions">
            <summary>
            Get boolean that specifies whether the database options in the target database should 
            be updated to match the source model.
            </summary>
            <value>
            True to alter the target database's options; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.ScriptDeployStateChecks">
            <summary>
            Get boolean that specifies whether the target database should be checked to ensure that 
            it exists, is online and can be updated.
            </summary>
            <value>
            True to perform state checks on the target database; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.ScriptFileSize">
            <summary>
            Get boolean that specifies whether a file size is specified when adding files to file groups.
            </summary>
            <value>
            True to specify a file size when adding files to file groups; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.ScriptNewConstraintValidation">
            <summary>
            Get boolean that specifies whether constraints are validated after all changes are applied.
            </summary>
            <value>
            True to validate check constraints; otherwise, false.
            Default is true.
            </value>
            <remarks>
            Constraints are always added with NOCHECK option; as a result their validation is skipped during creation.
            </remarks>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.ScriptRefreshModule">
            <summary>
            Get boolean that specifies whether referencing procedures are refreshed when referenced objects are updated.
            </summary>
            <value>
            True to refresh referencing procedures; otherwise false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.TargetConnectionString">
            <summary>
            Get string that specifies the target connection string
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.TargetDatabaseExists">
            <summary>
            Gets boolean that if set specifies whether the target database exists
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.TargetDatabaseName">
            <summary>
            Gets string that specifies the target database name
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.TargetingServerless">
            <summary>
            Get boolean that specifies whether the target server is LocalDB
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.TreatVerificationErrorsAsWarnings">
            <summary>
            Get boolean that specifies whether to treat errors that occur during publish verification as warnings. 
            The check is performed against the generated deployment plan before the plan is executed against the target database. 
            Plan verification detects problems, such as the loss of target-only objects (for example, indexes), that must be 
            dropped to make a change. Verification also detects situations where dependencies (such as tables or views) exist 
            because of a reference to a composite project, but do not exist in the target database. You might choose to treat 
            verification errors as warnings to get a complete list of issues instead of allowing the publish 
            action to stop when the first error occurs.
            </summary>
            <value>
            True to treat errors as warnings; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.UnmodifiableObjectWarnings">
            <summary>
            Get boolean that specifies whether warnings should be generated when differences are found 
            in objects that cannot be modified, for example, if the file size or file paths were different for a file.
            </summary>
            <value>
            True to generate warnings; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.VerifyCollationCompatibility">
            <summary>
            Get boolean that specifies whether deployment will verify that the collation specified in the 
            source model is compatible with the collation specified in the target model.
            </summary>
            <value>
            True to continue if errors are generated during plan verification; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.VerifyDeployment">
            <summary>
            Get boolean that specifies whether the plan verification phase is executed or not.
            </summary>
            <value>
            True to perform plan verification; otherwise, false to skip it.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.SqlDeploymentOptions.SqlCommandVariableValues">
            <summary>
            Get dictionary of SQL command variable values, keyed by variable name.
            </summary>
            <value>
            Dictionary of SQL command variable values, keyed by variable name.
            </value>
            <remarks>
            Valid values must be provided for every variable before deployment, or failures may occur during deployment.
            </remarks>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.DacExternalQueryScopes">
            <summary>
            Defines the type of objects to query from the model.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.DacExternalQueryScopes.None">
            <summary>
            Filter out all elements.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.DacExternalQueryScopes.UserDefined">
            <summary>
            Query user defined objects.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.DacExternalQueryScopes.BuiltIn">
            <summary>
            Query built in system objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.DacExternalQueryScopes.SameDatabase">
            <summary>
            Query user defined objects from referenced models where the referenced model is for the same database.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.DacExternalQueryScopes.System">
            <summary>
            Query System objects that are not treated as built in. These are objects that appear when the master
            database is referenced
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.DacExternalQueryScopes.DifferentDatabaseSameServer">
            <summary>
            Query references to external objects that are from a different database on the same server.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.DacExternalQueryScopes.DifferentDatabaseDifferentServer">
            <summary>
            Query references to external objects that are from a different database on a different same server.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.DacExternalQueryScopes.Default">
            <summary>
            Default query scope is to query both <see cref="F:Microsoft.SqlServer.Dac.Model.DacExternalQueryScopes.UserDefined"/>
            and <see cref="F:Microsoft.SqlServer.Dac.Model.DacExternalQueryScopes.BuiltIn"/> query scopes
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.DacExternalQueryScopes.All">
            <summary>
            All elements in the model, including references to external elements.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.DacModelError">
            <summary>
            Represents a model blocking error.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelError.ErrorType">
            <summary>
            Type of model blocking error
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelError.ErrorCode">
            <summary>
            DacModelError error code
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelError.Line">
            <summary>
            Line Number of the error
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelError.Column">
            <summary>
            Column Number of the error
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelError.Prefix">
            <summary>
            DacModelError prefix
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelError.Message">
            <summary>
            Message from DacModelError
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelError.SourceName">
            <summary>
            The TSqlObject with error. 
            Can be null if the object creation failed completely.
            Could be a partially constructed object in case of partial failures in object creation.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelError.SourceType">
            <summary>
            Type of the TSqlObject associated with the error
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelError.Severity">
            <summary>
            Severity of the error
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.DisplayServices">
            <summary>
            Provides a set of services for providing user-visible values for objects in the public model API.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.DisplayServices.GetEscapedNameString(System.String)">
            <summary>
            Pass in a short name string, return back an escaped version of the name string.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.DisplayServices.GetElementName(Microsoft.SqlServer.Dac.Model.TSqlObject,Microsoft.SqlServer.Dac.Model.ElementNameStyle)">
            <summary>
            Get element name string using different display style.
            </summary>
            <param name="element"><see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> </param>
            <param name="style"></param>
            <returns></returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.DisplayServices.GetDisplayName(Microsoft.SqlServer.Dac.Model.ObjectIdentifier,Microsoft.SqlServer.Dac.Model.EscapeStyle,System.Boolean)">
            <summary>
            Get display name of an identifier, with the option to configure use of full/short name and whether to escape name parts.
            </summary>
            <param name="identifier">The name identifier that can contain multiple parts.</param>
            <param name="escapeStyle"><see cref="T:Microsoft.SqlServer.Dac.Model.EscapeStyle"/> defining whether the parts of the name should be escaped or not</param>
            <param name="fullName">Indicates if the name is constructed in full or only the significant last part is used.</param>
            <returns>Display name</returns>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ElementNameStyle">
            <summary>
            Defines the different naming styles supported by the display services
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ElementNameStyle.Unknown">
            <summary>
            Unknown or undefined style - should be avoided
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ElementNameStyle.SimpleName">
            <summary>
            A non-escaped short name style.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ElementNameStyle.EscapedSimpleName">
            <summary>
            An escaped short name style.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ElementNameStyle.FullyQualifiedName">
            <summary>
            A non-escaped fully qualified name style.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ElementNameStyle.EscapedFullyQualifiedName">
            <summary>
            An escaped fully qualified name style.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.EscapeStyle">
            <summary>
            Enum to specify escape style for displaying model name
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EscapeStyle.Escape">
            <summary>
            Names should be escaped
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EscapeStyle.DontEscape">
            <summary>
            Names should not be escaped
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EscapeStyle.EscapeIfNecessary">
            <summary>
            Names should be escaped if not doing so would cause errors
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ElementWithCommentedScriptBody`1">
            <summary>
            Base class for elements with commented out script body
            Parses the given script with all known prior platform parsers until the script is successfully parsed.
            On successful parssing, extracts the TSqlStatment specified by the type parameter T
            </summary>
            <typeparam name="T">The create sql statement</typeparam>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.ElementWithCommentedScriptBody`1.GetParsedFragment">
            <summary>
            Parse the script with all known prior parsers
            </summary>
            <returns>Successfully parsed TSqlFragment parsed. null if not able to parse</returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.ElementWithCommentedScriptBody`1.ExtractSingleTSqlStatement">
            <summary>
            Extract the single TSQLStatment contained within the successfully parsed script.
            </summary>
            <returns>Single TSQLStatment within the successfully parsed script.</returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.ElementWithCommentedScriptBody`1.GetTSqlScriptWithCommentedScriptBody">
            <summary>
            Implemented by inherited members to comment out the script body of the Statement
            </summary>
            <returns>TSqlScipt of the element with commented out script body</returns>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ElementWithCommentedScriptBody`1.SqlPlatform">
            <summary>
            The SqlPlatform parser to first employ when trying to parse the script
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ElementWithCommentedScriptBody`1.ParsedFragment">
            <summary>
            Contains the successfully parsed TSqlFragment parsed by some prior platform parser.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ElementWithCommentedScriptBody`1.Statement">
            <summary>
            The single TSQLStatment contained within the script that was successfully parsed by some prior platform parser.
            Unpon construction, null value for Statement denotes either script was not successfully parsed or there were more than one statements.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ModelAnnotationPropertyContext">
            <summary>
            Property context for properties that are converted from annotations in the internal model.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ExternalDefinitionMetadataContext">
            <summary>
            <see cref="T:Microsoft.SqlServer.Dac.Model.ModelMetadataContext"/> implementation that handles external definition actions. These
            define a mapping from an internal <see cref="T:Microsoft.Data.Tools.Schema.SchemaModel.ModelElementClass"/> to a value in a public Enum type.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ElementDescriptor">
            <summary>
            Describes a SQL model element without instantiating a <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> in the
            <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/>.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.ElementDescriptor.GetModelElement(Microsoft.SqlServer.Dac.Model.TSqlModel)">
            <summary>
            Gets the corresponding <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> that matches this descriptor from a model.
            If no object matches the descriptor then null will be returned
            </summary>
            <param name="model"><see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/> the object should be found in</param>
            <returns>
            <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> that this <see cref="T:Microsoft.SqlServer.Dac.Model.ElementDescriptor"/> maps to, or null
            if no object definitively matches this descriptor
            </returns>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ElementDescriptor.IsEmpty">
            <summary>
            Returns if descriptor is empty (doesn't contain any identifiers).  It is possible for
            a descriptor to have a generated name - i.e. based on the context of a statement
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ElementDescriptor.HasUsableName">
            <summary>
            Helper to signify whether this descriptor has a name that is usable - i.e. the
            name parts represent the name of a SQL object.  
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ElementDescriptor.IgnoreName">
            <summary>
            Gets if name should be ignored for this descriptor.  It is possible for a
            descriptor to have no name AND IgnoreName == false
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ElementDescriptor.TypeClass">
            <summary>
            Returns back the type class that maps to the ElementType.  
            
            If there is no public mapping for the internal type then null will be returned.
            
            If the internal type maps to more than one element class the first element class
            is returned.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ElementDescriptor.Identifiers">
            <summary>
            The parts of the elements name.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ElementDescriptor.ExternalReferenceParts">
            <summary>
            Returns external parts for elements name
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ElementDescriptorRelevance">
            <summary>
            Specifies how a fragment being visited is related to a descriptor
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ElementDescriptorRelevance.None">
            <summary>
            No relevance or unknown relevance
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ElementDescriptorRelevance.ContainerId">
            <summary>
            The descriptor is related to an object that contains the fragment 
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ElementDescriptorRelevance.SelfId">
            <summary>
            The descriptor represents the same concept as the fragment 
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.CreateProcedureStatementWithCommentedScriptBody">
            <summary>
            Represents substituting a CreateProcedureStatement with commented out script body
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.CreateViewStatementWithCommentedScriptBody">
            <summary>
            Represents substituting a CreateViewStatement with commented out script body
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ModelCollationComparer">
            <summary>
            Comparer that can compare strings and <see cref="T:Microsoft.SqlServer.Dac.Model.ObjectIdentifier"/>s using the collation of a <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/>.
            This can be very useful when comparing objects in the model since comparisons will be consistent with the expected comparison
            results in SQL Server
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.ModelCollationComparer.Equals(System.String,System.String)">
            <summary>
            Compare if two objects are equal.
            </summary>
            <param name="x">Source object.</param>
            <param name="y">Target object.</param>
            <returns>True if equal, otherwise false.</returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.ModelCollationComparer.Equals(System.Collections.Generic.IList{System.String},System.Collections.Generic.IList{System.String})">
            <summary>
            Test if two identifiers are equal using collation of this comparer.
            </summary>
            <param name="x">List of name parts in the first identifier.</param>
            <param name="y">List of name parts in the second identifier.</param>
            <returns></returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.ModelCollationComparer.Equals(Microsoft.SqlServer.Dac.Model.ObjectIdentifier,Microsoft.SqlServer.Dac.Model.ObjectIdentifier)">
            <summary>
            Test if two identifiers are equal using collation of this comparer.
            </summary>
            <param name="x">The first <see cref="T:Microsoft.SqlServer.Dac.Model.ObjectIdentifier"/>.</param>
            <param name="y">The second <see cref="T:Microsoft.SqlServer.Dac.Model.ObjectIdentifier"/>.</param>
            <returns></returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.ModelCollationComparer.GetHashCode(Microsoft.SqlServer.Dac.Model.ObjectIdentifier)">
            <summary>
            Gets a Hashcode for the object that's compatible with the 
            <see cref="M:Microsoft.SqlServer.Dac.Model.ModelCollationComparer.Equals(Microsoft.SqlServer.Dac.Model.ObjectIdentifier,Microsoft.SqlServer.Dac.Model.ObjectIdentifier)"/> method of this comparer
            </summary>
            <param name="obj">The object to get a hashcode for</param>
            <returns>hashcode</returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.ModelCollationComparer.GetHashCode(System.Collections.Generic.IList{System.String})">
            <summary>
            Gets a Hashcode for the object that's compatible with the 
            <see cref="M:Microsoft.SqlServer.Dac.Model.ModelCollationComparer.Equals(System.Collections.Generic.IList{System.String},System.Collections.Generic.IList{System.String})"/> method of this comparer
            </summary>
            <param name="obj">The object to get a hashcode for</param>
            <returns>hashcode</returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.ModelCollationComparer.GetHashCode(System.String)">
            <summary>
            Gets a Hashcode for the object that's compatible with the 
            <see cref="M:Microsoft.SqlServer.Dac.Model.ModelCollationComparer.Equals(System.String,System.String)"/> method of this comparer
            </summary>
            <param name="obj">The object to get a hashcode for</param>
            <returns>hashcode</returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.ModelCollationComparer.Compare(System.String,System.String)">
            <summary>
            Compare two objects using collation of this comparer.
            </summary>
            <param name="x">Source object.</param>
            <param name="y">Target object.</param>
            <returns></returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.ModelCollationComparer.Compare(System.Collections.Generic.IList{System.String},System.Collections.Generic.IList{System.String})">
            <summary>
            Compare two objects using collation of this comparer.
            </summary>
            <param name="x">Source object.</param>
            <param name="y">Target object.</param>
            <returns></returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.ModelCollationComparer.Compare(Microsoft.SqlServer.Dac.Model.ObjectIdentifier,Microsoft.SqlServer.Dac.Model.ObjectIdentifier)">
            <summary>
            Compare two objects using collation of this comparer.
            </summary>
            <param name="x">Source object.</param>
            <param name="y">Target object.</param>
            <returns></returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.InternalModelUtils.IsInlineConstraintOrIndex(Microsoft.Data.Tools.Schema.SchemaModel.IModelElement)">
            <summary>
            Checks if an internal element represents an inline constraint or annotation
            </summary>
            <param name="element">The element to check</param>
            <returns>True if the element is an inline constraint or index. False otherwise.</returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.InternalModelUtils.TryGetSingleReferencedElementInfo(Microsoft.Data.Tools.Schema.SchemaModel.ModelRelationshipClass,Microsoft.Data.Tools.Schema.SchemaModel.IModelElement,Microsoft.Data.Tools.Schema.SchemaModel.IModelElement@,Microsoft.Data.Tools.Schema.SchemaModel.ModelIdentifier@)">
            <summary>
            Tries to get info from a relationship on an element. The relationship must have single cardinality.
            If successful the information returned will at a minimum be the <see cref="T:Microsoft.Data.Tools.Schema.SchemaModel.ModelIdentifier"/>
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.PotentialElementDescriptor">
            <summary>
            This class represents an ambigous element descriptor, where it's not fully clear which
            element in the model a descriptor might map to
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PotentialElementDescriptor.Relevance">
            <summary>
            Gets the Relevance associated with the potential descriptor
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.SchemaAnalysisService">
            <summary>
            Internal service that links the public <see cref="T:Microsoft.SqlServer.Dac.Model.SchemaAnalyzer"/> code to the internal
            analyzer codebase
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.SchemaAnalysisService.CreateAnalysisService(Microsoft.SqlServer.Dac.Model.SchemaAnalyzer)">
            <summary>
            Factory method to construct a service. May want to move this into the <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObjectService"/>
            if we ever wanted to abstract away implementation details even further
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.SimpleModelRelationshipContext">
            <summary>
            Default Property context for all properties.
            </summary>
            <remarks>
            Provides default implementation for relationship access through the public model.
            </remarks>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SimpleModelRelationshipContext.CollapsedRelationshipClasses">
            <summary>
            The possible relationships for the collapsed reference lookup
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.DacModelMessage">
            <summary>
            Represents an error or a warning raised during model validation.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.DacModelResources">
            <summary>
              A strongly-typed resource class, for looking up localized strings, etc.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.ResourceManager">
            <summary>
              Returns the cached ResourceManager instance used by this class.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.Culture">
            <summary>
              Overrides the current thread's CurrentUICulture property for all
              resource lookups using this strongly typed resource class.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.AddObjectsErrorAddingObjects">
            <summary>
              Looks up a localized string similar to Add or update objects failed due to the following errors: .
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.AddObjectsModelErrorsExist">
            <summary>
              Looks up a localized string similar to Cannot add or update objects. The model has build blocking errors:.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.AstNotRetrieved">
            <summary>
              Looks up a localized string similar to The AST could not be retrieved for the specified object..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.AstNotSupportedError">
            <summary>
              Looks up a localized string similar to AST retrieval not supported for the specified object..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.AutoGeneratedCommentedScriptBodyText">
            <summary>
              Looks up a localized string similar to \nAuto generated text: The original script body has been commented in order to add this object to the model.\n.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.ConvertObject_SourceNameDifferentFromObjectSource">
            <summary>
              Looks up a localized string similar to Cannot convert object to script. The source name &apos;{0}&apos; does not match existing source name &apos;{1}&apos;. Changing source names is not supported..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.ConvertObject_SourceNameExists">
            <summary>
              Looks up a localized string similar to Cannot convert object to script. The source name &apos;{0}&apos; is already in use in this model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.ConvertObject_WhitespaceNotAllowed">
            <summary>
              Looks up a localized string similar to Source name cannot consist of whitespace.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.DacpacLoadReferenceError">
            <summary>
              Looks up a localized string similar to Cannot load package &apos;{0}&apos;. Required references are missing..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.DeleteObjectsErrorDeletingObjects">
            <summary>
              Looks up a localized string similar to Delete objects failed due to the following errors: .
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.DeleteObjectsModelErrorsExist">
            <summary>
              Looks up a localized string similar to Cannot delete objects from the model. The model has build blocking errors:.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.ErrorScriptNameValidation">
            <summary>
              Looks up a localized string similar to {0}: parameter {1} cannot be null, the empty string, all whitespace, or end in &quot;.xsd&quot;.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.GetObjectsTopLevelTypesRequiredError">
            <summary>
              Looks up a localized string similar to Type &apos;{0}&apos; is not a top-level type. Only top-level types can be queried for using the TSqlModel GetObject(s) methods..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.InconsistentPropertyTypes">
            <summary>
              Looks up a localized string similar to Not all property types match expected type &apos;{0}&apos;..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.InternalPropertyMappingInvalid">
            <summary>
              Looks up a localized string similar to Internal Error. No internal property mapped on internal type {0} for public property {1}..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.InternalPropertyTypeMismatchErrorMessage">
            <summary>
              Looks up a localized string similar to Internal Error. Data types for internal properties &apos;{0}.{1}&apos; and &apos;{2}.{3}&apos; do not match..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.InternalRelationshipMappingInvalid">
            <summary>
              Looks up a localized string similar to No internal relationship mapped on internal type {0} for public relationship {1}..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.InternalTypeMappingInvalid">
            <summary>
              Looks up a localized string similar to Internal Error. No public type mapping was found for internal type {0}, for element with id {1}..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.InvalidContextObjectErrorMessage">
            <summary>
              Looks up a localized string similar to Internal Error. Context object must implement ISqlModelElement..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.InvalidContextObjectForDefaultErrorMessage">
            <summary>
              Looks up a localized string similar to Internal Error. There is no context object to derive a default from..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.InvalidMetadataContextErrorMessage">
            <summary>
              Looks up a localized string similar to Metadata {0} has an invalid context type..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.InvalidMetadataTypeErrorMessage">
            <summary>
              Looks up a localized string similar to Data type {1} for metadata {0} cannot be cast to {2}..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.InvalidModelElementErrorMessage">
            <summary>
              Looks up a localized string similar to Internal Error. Internal elements must implement IModelElement..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.InvalidNavigationPathRelationship">
            <summary>
              Looks up a localized string similar to Relationship &apos;{0}.{1}&apos; cannot be used for type collapsing navigation as it is a one-to-many relationship..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.InvalidPropertyContextErrorMessage">
            <summary>
              Looks up a localized string similar to Property {0} has an invalid context type..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.InvalidPropertyTypeErrorMessage">
            <summary>
              Looks up a localized string similar to Data type {1} for property {0} cannot be cast to {2}..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.InvalidRelationshipContextErrorMessage">
            <summary>
              Looks up a localized string similar to Relationship {0} has an invalid context type..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.InvalidTypeErrorMessage">
            <summary>
              Looks up a localized string similar to Data type {0} cannot be cast to {1}..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.InvalidTypeNameErrorMessage">
            <summary>
              Looks up a localized string similar to The type name {0} is not valid..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.LoadScriptBackedModelFailed">
            <summary>
              Looks up a localized string similar to Loading source as a script-backed model failed due to the following errors:.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.MetadataDoesNotMapEnumErrorMessage">
            <summary>
              Looks up a localized string similar to Internal error. Type &apos;{0}&apos; is not an Enum, expected Enum for GetMetadata.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.MetadataNotSupportedOnTypeErrorMessage">
            <summary>
              Looks up a localized string similar to ModelMetadataClass {0} is not supported on type {1}..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.MissingMetadataMappingErrorMessage">
            <summary>
              Looks up a localized string similar to Metadata context must be mapped to at least one internal property..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.MissingPropertyMappingErrorMessage">
            <summary>
              Looks up a localized string similar to Internal Error. Property context must be mapped to at least one internal property..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.MissingReference">
            <summary>
              Looks up a localized string similar to No file was supplied for reference {0}; model load might fail. When {1} was created, the original referenced file was located {2}..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.MissingReference_NoPackagePath">
            <summary>
              Looks up a localized string similar to No file was supplied for reference {0}; model load might fail. When package was created, the original referenced file was located {1}..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.MissingRelationshipMappingErrorMessage">
            <summary>
              Looks up a localized string similar to Context must include at least one internal relationship mapping.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.ModelDisposedError">
            <summary>
              Looks up a localized string similar to The underlying model has been disposed..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.ModelErrorsExist">
            <summary>
              Looks up a localized string similar to The model has build blocking errors:.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.MoreThanOneObjectMatchedId">
            <summary>
              Looks up a localized string similar to More than one object matched the ID &apos;{0}&apos;..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.NoValidEnumForMetadata">
            <summary>
              Looks up a localized string similar to Type &apos;{0}&apos; does not have a mapping for the int value &apos;{1}&apos;.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.PropertiesNotSupportedForRelationshipError">
            <summary>
              Looks up a localized string similar to Properties are not supported on ModelRelationshipInstances for Relationship {0}.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.PropertyNotSupportedOnRelationshipErrorMessage">
            <summary>
              Looks up a localized string similar to ModelPropertyClass {0} is not supported on relationship {1}..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.PropertyNotSupportedOnTypeErrorMessage">
            <summary>
              Looks up a localized string similar to ModelPropertyClass {0} is not supported on type {1}..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.PublicContributorThrewExceptionMessage">
            <summary>
              Looks up a localized string similar to DeploymentContributor &apos;{0}&apos; threw exception. Message is: &apos;{1}&apos;.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.RelationshipNotSupportedOnTypeErrorMessage">
            <summary>
              Looks up a localized string similar to ModelRelationshipClass {0} is not supported on type {1}..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.SaveModelErrorsExist">
            <summary>
              Looks up a localized string similar to Cannot save package to file. The model has build blocking errors:.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.ScriptNotRetrieved">
            <summary>
              Looks up a localized string similar to The script could not be retrieved for the specified object..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.ScriptNotSupportedError">
            <summary>
              Looks up a localized string similar to Script retrieval not supported for the specified object..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.ServiceDisposedError">
            <summary>
              Looks up a localized string similar to The underlying model service has been disposed..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.UpdateModelErr">
            <summary>
              Looks up a localized string similar to Error updating model..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.UpdateModelErr_PackageContainsData">
            <summary>
              Looks up a localized string similar to Cannot update the model as the package contains data. This is not supported since it could cause errors during deployment.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DacModelResources.UpdateModelErr_UnsupportedDacpacVersion">
            <summary>
              Looks up a localized string similar to Updating package with version &apos;{0}&apos; is not supported. Only packages with version 3.0 or higher are supported for update..
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.DacQueryScopes">
            <summary>
            Defines the type of objects to query from the model.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.DacQueryScopes.None">
            <summary>
            Filter out all elements.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.DacQueryScopes.UserDefined">
            <summary>
            Query user defined objects.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.DacQueryScopes.BuiltIn">
            <summary>
            Query built in system objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.DacQueryScopes.SameDatabase">
            <summary>
            Query user defined objects from referenced models where the referenced model is for the same database.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.DacQueryScopes.System">
            <summary>
            Query System objects that are not treated as built in. These are objects that appear when the master
            database is referenced
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.DacQueryScopes.Default">
            <summary>
            Default query scope is to query both <see cref="F:Microsoft.SqlServer.Dac.Model.DacQueryScopes.UserDefined"/>
            and <see cref="F:Microsoft.SqlServer.Dac.Model.DacQueryScopes.BuiltIn"/> query scopes
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.DacQueryScopes.All">
            <summary>
            All elements in the model, not including references to external elements in non-system databases.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.SqlElementDescriptor.Equals(System.Object)">
            <summary>
            <see cref="M:System.Object.Equals(System.Object)"/>
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.SqlElementDescriptor.GetHashCode">
            <summary>
            <see cref="M:System.Object.GetHashCode"/>
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.SqlModelCollationComparer">
            <summary>
            Internal SQL implementation of the <see cref="T:Microsoft.SqlServer.Dac.Model.ModelCollationComparer"/>. Uses the
            comparer built into an internal model for the comparison
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.SqlSchemaModelLoader">
            <summary>
            Responsible for loading a model from a dacpac
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.SqlSchemaModelLoader.ModelHeaderDataLoader">
            <summary>
            Loads references, SqlCmd variables, and refactor log data from a dacpac
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlObjectService.ConvertToScriptedModel(System.Threading.CancellationToken)">
            <summary>
            Converts objects in a given scope into scriptable objects by deleting the internal representation of
            user defined objects and recreating them with a script-backed representation
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlObjectService.ConvertToScriptedObject(Microsoft.SqlServer.Dac.Model.TSqlObject,System.String)">
            <summary>
            Converts a specific top-level object in the model into a scripted representation of itself. This is done
            by scripting out the element, then dropping this element, and finally adding it back in and resolving the model
            </summary>
            <returns>New copy of the TSqlObject, which will now be script-backed</returns>
            <exception cref="T:Microsoft.SqlServer.Dac.Model.DacModelException">If the object could not be scripted out, this class of object is never scriptable,
            or errors were found in the model during the script process </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.SqlSchemaModelObjectService.#ctor(Microsoft.SqlServer.Dac.Model.TSqlModelSchema,Microsoft.Data.Tools.Schema.SchemaModel.DataSchemaModel)">
            <summary>
            Internal for testing purposes only. Use SqlSchemaModelObjectService(InternalModel.DataSchemaModel model)for
            product code.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.SqlSchemaModelObjectService.#ctor(Microsoft.Data.Tools.Schema.SchemaModel.DataSchemaModel)">
            <summary>
            Public constructor to be used by product code
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.SqlSchemaModelObjectService.CreateParserRepository">
            <summary>
            Initialize TSqlParserRepository
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.SqlSchemaModelObjectService.SetScriptBacked(System.Boolean)">
            <summary>
            Internal method that enables setting whether the model is script-backed or not. This can be used to
            warn about code analysis running against a non-scripted model, for instance.
            </summary>
            <param name="isScriptBacked"></param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.SqlSchemaModelObjectService.TryGetObject(Microsoft.Data.Tools.Schema.SchemaModel.IModelElement,Microsoft.SqlServer.Dac.Model.TSqlObject@)">
            <summary>
            Internal utility method - wraps an internal model element in a public TSqlObject. Should never be exposed as part of the service.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.SqlSchemaModelObjectService.GetObjects(System.String,Microsoft.SqlServer.Dac.Model.ModelTypeClass[])">
            <summary>
            Retrieves all TSqlObjects in a given source document filtered by ModelTypeClass specified by the types parameter
            </summary>
            <param name="sourceName">Name of the source document</param>
            <param name="types">Array of ModelTypeClass that the resulting TSqlObject should be filtered on. 
            If the parameter is a empty list, all objects will be returned.</param>
            <returns>List of TSqlObjects</returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.SqlSchemaModelObjectService.GetModelErrors">
            <summary>
            Retrieves all model errors.
            </summary>
            <returns>List of model errors</returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.SqlSchemaModelObjectService.GetModelIdForNamedObjectId(Microsoft.SqlServer.Dac.Model.ObjectIdentifier)">
            <summary>
            Gets the internal that matches a public ID
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.SqlSchemaModelObjectService.GetAsValidIModelElement(System.Object)">
            <summary>
            Converts an object to an IModelElement, throwing if the cast is invalid
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.SqlSchemaModelObjectService.IsToplevelObject(Microsoft.SqlServer.Dac.Model.TSqlObject)">
            <summary>
            Returns if an object's create script is a top level T-SQL statement.
            </summary>
            <param name="tSqlObject"><see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> to query.</param>
            <returns>True if object's create statement is a top level statement.</returns>
            <exception cref="T:System.ArgumentNullException">If <paramref name="tSqlObject"/> is null.</exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.SqlSchemaModelObjectService.TryGetAst(Microsoft.SqlServer.Dac.Model.TSqlObject,Microsoft.SqlServer.TransactSql.ScriptDom.TSqlScript@)">
            <summary>
            Generates the AST for the <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/>.
            </summary>
            <returns>True is AST generated.</returns>
            <param name="ast">Generated AST.</param>
            <param name="tSqlObject"><see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> to query.</param>
            <exception cref="T:System.ArgumentNullException">Thrown if <paramref name="tSqlObject"/> is null.</exception>
            <exception cref="T:Microsoft.SqlServer.Dac.Model.DacModelException">Thrown if the <see cref="P:Microsoft.SqlServer.Dac.Model.TSqlObject.ContextObject"/> property of <paramref name="tSqlObject"/> does not implement correct type.</exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.SqlSchemaModelObjectService.TryGetScript(Microsoft.SqlServer.Dac.Model.TSqlObject,System.String@)">
            <summary>
            Generates the script for the <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/>.
            </summary>
            <returns>True is script generated.</returns>
            <param name="tSqlObject">The <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> to be scripted</param>
            <param name="script">Generated script.</param>
            <exception cref="T:System.ArgumentNullException">Thrown if <paramref name="tSqlObject"/> is null.</exception>
            <exception cref="T:Microsoft.SqlServer.Dac.Model.DacModelException">Thrown if the <see cref="P:Microsoft.SqlServer.Dac.Model.TSqlObject.ContextObject"/> property of <paramref name="tSqlObject"/> does not implement correct type.</exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.SqlSchemaModelObjectService.CreateCacheIdentifier(System.String)">
            <summary>
            Creates an identifier that is compatible with the internal model's treatment of source names.
            Internally the ScriptCache checks for "MSSQLL::" at the beginning of a source name. 
            
            This indicates that the name isn't a path and shouldn't be auto-expanded based on the current working directory.
            We don't want to treat source names passed into the public API as paths, especially since this would result in 
            the current working directory being added in front of any source name that wasn't a fully qualified path. 
            
            The tradeoff is external users of the API don't get the benefit of us auto-resolving relative paths for them,
            but that's an acceptable tradeoff
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.SqlSchemaModelObjectService.GetSourceNameFromCacheId(System.String)">
            <summary>
            Removes the "MSSQL::" string from the beginning of a cache identifier to get the source name.
            see <see cref="M:Microsoft.SqlServer.Dac.Model.SqlSchemaModelObjectService.CreateCacheIdentifier(System.String)"/> for more information on why this behavior is needed
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.SqlSchemaModelObjectService.ExecutePackageOperationWithErrorHandling(System.Action)">
            <summary>
            Performs error handling around an operation on a DacPackage, such as creating or updating
            the package. There are a standard set of exceptions that can be thrown in this case
            </summary>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">Thrown if any error occurs when operating on the package</exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.SqlSchemaModelObjectService.GetSourceInformationInternal(Microsoft.Data.Tools.Schema.SchemaModel.ISourceInformation)">
            <summary>
            Gets source info from an internal source by stripping any cache ID info from the source name
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.SqlSchemaModelObjectService.ConvertToScriptedObject(Microsoft.SqlServer.Dac.Model.TSqlObject,System.String)">
            <summary>
            Converts a specific top-level object in the model into a scripted representation of itself. This is done
            by scripting out the element, then dropping this element, and finally adding it back in and resolving the model
            </summary>
            <returns>New copy of the TSqlObject, which will now be script-backed</returns>
            <exception cref="T:Microsoft.SqlServer.Dac.Model.DacModelException">If the object could not be scripted out, this class of object is never scriptable,
            or errors were found in the model during the script process </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.SqlSchemaModelObjectService.ConvertToScriptedObject(Microsoft.SqlServer.Dac.Model.TSqlObject,System.String,System.String)">
            <summary>
            For simplicity, keeping this method private for now. Consider exposing publicly as a perf improvement in scenarios where 
            caller clearly knows that they want to directly replace an unscripted model element (e.g. a table) with a new definition.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.SqlSchemaModelObjectService.ConvertToScriptedModel(System.Threading.CancellationToken)">
            <summary>
            Converts all user-defined objects in the model into scripted representations of themselves. This is done
            by scripting out the elements we're going to drop, then dropping all these elements, and finally adding them
            back in and resolving the model
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.SqlSchemaModelObjectService.CollectObjectsToBeRecreated(System.Collections.Generic.Dictionary{System.String,System.Tuple{Microsoft.SqlServer.Dac.Model.TSqlObject,System.String}},System.Threading.CancellationToken)">
            <summary>
            One step in converting objects to a scripted model: Must create script representations of each object to be deleted, 
            since we would like to remove them all and re-add them with only one Resolve operation. Otherwise we would have to 
            resolve after each delete and recreation to avoid unresolved references causing problems during scripting
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.SqlSchemaModelObjectService.DropAndRecreateElements(System.Collections.Generic.Dictionary{System.String,System.Tuple{Microsoft.SqlServer.Dac.Model.TSqlObject,System.String}},System.Threading.CancellationToken)">
            <summary>
            One step in converting objects to a scripted model: 
            for each of the objects to be dropped and recreated the element, its composed children and inline hierarchical 
            children are all deleted. Then they are added back into the model via the scripted representation of the objects.
            
            Note that this does not call Resolve on the model in order to support multiple updates followed by a single
            resolve, hence the caller must ensure the model is resolved once all these operations are completed.  
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.SqlSchemaModelObjectService.DoAddOrUpdateSubstitutedObject(Microsoft.Data.Tools.Schema.Sql.SchemaModel.ISqlModelElement,System.String,Microsoft.SqlServer.Dac.Model.TSqlObjectOptions,System.String,System.String)">
            <summary>
            If adding an object to the model fails due to model blocking errors and if the ModelLoadOption is set to not throw on errors,
            the original object is substituted with a replacement object whose errant parts are removed. These errors are common in case of objects with
            old deprecated syntax. 
            This method substitutes stored procedures and views with equivalent new objects that has commented out script body.
            In case of other types of objects, an empty element with just the name of the errant object is added to the model.
            </summary>
            <param name="element">The element that originally failed to add to the model.</param>
            <param name="sourceName">source name of the object</param>
            <param name="options">TSqlObjectOptions for the object</param>
            <param name="script">Script of the object</param>
            <param name="cacheIdentifier">cache identifier for the object</param>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SqlSchemaModelObjectService.ModelBuilder">
            <summary>
            Internal for testing purposes only
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SqlSchemaModelObjectService.DataSchemaModel">
            <summary>
            Internal, only to be accessed by internal services as required.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlSchemaModelObjectService.ScopeFilter._includeAll">
            <summary>
            If query scope includes all elements, even externals
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlSchemaModelObjectService.ScopeFilter._includeAllNonExternal">
            <summary>
            If query scope includes all elements, except
            non-Composite external
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlSchemaModelObjectService.ScopeFilter._includeUserDefined">
            <summary>
            If query scope includes user defined elements
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlSchemaModelObjectService.ScopeFilter._includeBuiltIn">
            <summary>
            if query scope includes built-in elements
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlSchemaModelObjectService.ScopeFilter._includeSameDatabase">
            <summary>
            If query scope includes external elements in the same database
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlSchemaModelObjectService.ScopeFilter._includeSystem">
            <summary>
            If query scope includes elements from system dacpac ("master" reference)
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlSchemaModelObjectService.ScopeFilter._includeDifferentDatabaseSameServer">
            <summary>
            If query scope includes external elements in a different database on this server (for return of ID only)
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlSchemaModelObjectService.ScopeFilter._includeDifferentDatabaseDifferentServer">
            <summary>
            If query scope includes external elements in a different database on a separate server (for return of ID only)
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.SqlSchemaModelObjectService.ScopeFilter.SetupScopeVariables(Microsoft.SqlServer.Dac.Model.DacQueryScopes)">
            <summary>
            Converts <see cref="T:Microsoft.SqlServer.Dac.Model.DacQueryScopes"/> into filter criteria to use when querying the internal model.
            </summary>
            <param name="queryScopes">QueryScope to expand.</param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.SqlSchemaModelObjectService.ScopeFilter.SetupScopeVariables(Microsoft.SqlServer.Dac.Model.DacExternalQueryScopes)">
            <summary>
            Converts <see cref="T:Microsoft.SqlServer.Dac.Model.DacExternalQueryScopes"/> into filter criteria to use when querying the internal model.
            </summary>
            <param name="queryScopes">QueryScope to expand.</param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.SqlSchemaModelObjectService.ScopeFilter.ShouldReturnElement(Microsoft.Data.Tools.Schema.SchemaModel.IModelElement)">
            <summary>
            Determines if the element matches the query criteria. Fully external elements 
            should never be returned from this method, though system elements may be supported.
            </summary>
            <param name="element">Element to consider</param>
            <returns>true if element matches query criteria. Otherwise false.</returns>
            /// <remarks></remarks>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.SqlSchemaModelObjectService.ScopeFilter.ShouldReturnIdForElement(Microsoft.Data.Tools.Schema.SchemaModel.IModelElement)">
            <summary>
            Determines if the element ID can be returned - external elements will support
            return of the external ID in a relationship instance, but should never support
            return of the actual element. 
            </summary>
            <param name="element">Element to consider</param>
            <returns>true if element matches query criteria. Otherwise false.</returns>
            /// <remarks></remarks>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SqlSchemaModelObjectService.ScopeFilter.QueryFilter">
            <summary>
            filter used when retrieving element
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ModelErrorSeverity">
            <summary>
            Represents the severity level of the model error
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelErrorSeverity.Unknown">
            <summary>
            Severity is unknown
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelErrorSeverity.Error">
            <summary>
            Model error
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelErrorSeverity.Warning">
            <summary>
            Warning in the model
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ModelErrorType">
            <summary>
            The model error type. Represents the various classification of model blocking errors.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelErrorType.ParserError">
            <summary>
            Represents a parser error in an object in the model
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelErrorType.InterpreterError">
            <summary>
            Represents a interpreter error in an object in the model
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelErrorType.ModelValidationError">
            <summary>
            Any other model blocking validation errors.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ModelExtractOptions">
            <summary>
            Defines options that affect the behavior of loading a model from a database.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.ModelExtractOptions.#ctor">
            <summary>
            Construct a new instance of the <see cref="T:Microsoft.SqlServer.Dac.Model.ModelExtractOptions"/> class.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ModelExtractOptions.ExtractReferencedServerScopedElements">
            <summary>
            Get or set boolean that specifies whether server-scoped elements referenced by the source should be extracted.
            </summary>
            <value>
            True if references server-scoped elements should be extracted; otherwise false.
            Default value is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ModelExtractOptions.ExtractApplicationScopedObjectsOnly">
            <summary>
            Get or set boolean that specifies the scope of objects extracted from the source.
            </summary>
            <value>
            True if only application-scoped objects should be extracted;
            otherwise false to extract all object types.
            Default value is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ModelExtractOptions.IgnoreExtendedProperties">
            <summary>
            Get or set boolean that specifies whether extended properties should be ignored.
            </summary>
            <value>
            True if extended properties will be ignored; otherwise false.
            Default value is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ModelExtractOptions.IgnorePermissions">
            <summary>
            Get or set boolean that specifies whether permissions should be ignored.
            </summary>
            <value>
            True if permissions will be ignored; otherwise false.
            Default value is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ModelExtractOptions.IgnoreUserLoginMappings">
            <summary>
            Get or set boolean that specifies whether mappings between users and logins should be extracted from the source.
            </summary>
            <value>
            True if user login mappings will be ignored; otherwise false.
            Default value is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ModelExtractOptions.Storage">
            <summary>
            Get the type of backing storage for the schema model used during extraction.
            </summary>
            <value>
            Enumeration value that specifies the type of backing storage for the schema model used during extraction.
            Default value is File.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ModelExtractOptions.VerifyExtraction">
            <summary>
            Get or set boolean that specifies whether the extracted package should be verified.
            </summary>
            <value>
            True if the package should be verified; otherwise false.
            Default value is false.
            </value> 
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ModelExtractOptions.LoadAsScriptBackedModel">
            <summary>
            Should the model be loaded so that objects are backed up by scripted representations? In this case objects in the 
            <see cref="F:Microsoft.SqlServer.Dac.Model.DacQueryScopes.UserDefined"/> scope will have a source name and source position information. 
            
            When loading from a Dacpac or any other non-scripted source the model will not have source information. This
            means that when running static code analysis using the <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService"/> some rules may not work 
            correctly, and that existing objects in the model could not be replaced using the 
            <see cref="M:Microsoft.SqlServer.Dac.Model.TSqlModel.AddOrUpdateObjects(System.String,System.String,Microsoft.SqlServer.Dac.Model.TSqlObjectOptions)"/> method since there
            is no script with their original definition. For scenarios that use the <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService"/> setting this
            to true is strongly recommended. Similarly if you wish to update existing objects in the model setting this to true may
            be useful.
            
            Note that there is a potentially significant performance cost involved in creating a scripted model. All 
            top level objects in the <see cref="F:Microsoft.SqlServer.Dac.Model.DacQueryScopes.UserDefined"/> scope will be scripted out as strings 
            and then replaced with their scripted representations, after which the model will then have to fully resolve all 
            relationships. This will cause a one-time performance hit at the time the model is loaded. 
            </summary>
            <remarks>Default value is false, since there is a performance hit involved in creating a script-backed model from a 
            non-scripted source</remarks>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ModelExtractOptions.ExtractUsageProperties">
            <summary>
            Usage properties include Table.RowCount, Table.IndexSize, Table.DataSize, Table.UsedPages and Table.DataPages.
            When true, these properties are extracted from the database and are accessible in the model.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ModelLoadOptions">
            <summary>
            Options for loading a model from a data source such as a Dacpac file.
            
            These options can be very important depending on the scenario. For instance
            when running static code analysis using the <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService"/> it is strongly recommended that 
            the <see cref="P:Microsoft.SqlServer.Dac.Model.ModelLoadOptions.LoadAsScriptBackedModel"/> option be set to true, as many rules expect a fully scripted source and
            may not operate as expected on a non script-backed model. 
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.ModelLoadOptions.#ctor">
            <summary>
            Constructs an instance of <see cref="T:Microsoft.SqlServer.Dac.Model.ModelLoadOptions"/> with the default options, which are
            to use <see cref="F:Microsoft.SqlServer.Dac.DacSchemaModelStorageType.Memory"/> storage and to set
            <see cref="P:Microsoft.SqlServer.Dac.Model.ModelLoadOptions.LoadAsScriptBackedModel"/> to be false.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.ModelLoadOptions.#ctor(Microsoft.SqlServer.Dac.DacSchemaModelStorageType,System.Boolean)">
            <summary>
            Constructs an instance of <see cref="T:Microsoft.SqlServer.Dac.Model.ModelLoadOptions"/> with the specified options.
            </summary>
            <param name="modelStorageType">Value for the <see cref="P:Microsoft.SqlServer.Dac.Model.ModelLoadOptions.ModelStorageType"/> property</param>
            <param name="loadAsScriptBackedModel">Value for the <see cref="P:Microsoft.SqlServer.Dac.Model.ModelLoadOptions.LoadAsScriptBackedModel"/> property</param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.ModelLoadOptions.#ctor(Microsoft.SqlServer.Dac.DacSchemaModelStorageType,System.Boolean,System.Boolean)">
            <summary>
            Constructs an instance of <see cref="T:Microsoft.SqlServer.Dac.Model.ModelLoadOptions"/> with the specified options.
            </summary>
            <param name="modelStorageType">Value for the <see cref="P:Microsoft.SqlServer.Dac.Model.ModelLoadOptions.ModelStorageType"/> property</param>
            <param name="loadAsScriptBackedModel">Value for the <see cref="P:Microsoft.SqlServer.Dac.Model.ModelLoadOptions.LoadAsScriptBackedModel"/> property</param>
            <param name="throwOnModelErrors">Value for the <see cref="P:Microsoft.SqlServer.Dac.Model.ModelLoadOptions.ThrowOnModelErrors"/> property</param>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ModelLoadOptions.ModelStorageType">
            <summary>
            Should the model be stored in memory or should a file-backed storage be used?
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ModelLoadOptions.LoadAsScriptBackedModel">
            <summary>
            Should the model be loaded so that objects are backed up by scripted representations? In this case objects in the 
            <see cref="F:Microsoft.SqlServer.Dac.Model.DacQueryScopes.UserDefined"/> scope will have a source name and source position information. 
            
            When loading from a Dacpac or any other non-scripted source the model will not have source information. This
            means that when running static code analysis using the <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService"/> some rules may not work 
            correctly, and that existing objects in the model could not be replaced using the 
            <see cref="M:Microsoft.SqlServer.Dac.Model.TSqlModel.AddOrUpdateObjects(System.String,System.String,Microsoft.SqlServer.Dac.Model.TSqlObjectOptions)"/> method since there
            is no script with their original definition. For scenarios that use the <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService"/> setting this
            to true is strongly recommended. Similarly if you wish to update existing objects in the model setting this to true may
            be useful.
            
            Note that there is a potentially significant performance cost involved in creating a scripted model. All 
            top level objects in the <see cref="F:Microsoft.SqlServer.Dac.Model.DacQueryScopes.UserDefined"/> scope will be scripted out as strings 
            and then replaced with their scripted representations, after which the model will then have to fully resolve all 
            relationships. This will cause a one-time performance hit at the time the model is loaded. 
            </summary>
            <remarks>Default value is false, since there is a performance hit involved in creating a script-backed model from a 
            non-scripted source</remarks>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ModelLoadOptions.ThrowOnModelErrors">
            <summary>
            Defines whether the model edit APIs throw a <see cref="T:Microsoft.SqlServer.Dac.Model.DacModelException"/> if there are any blocking errors present in the model.
            
            When adding a new object or deleting/modifying existing objects in the model using API calls such as 
            <see cref="M:Microsoft.SqlServer.Dac.Model.TSqlModel.AddObjects(System.String)"/>, <see cref="M:Microsoft.SqlServer.Dac.Model.TSqlModel.AddOrUpdateObjects(System.String,System.String,Microsoft.SqlServer.Dac.Model.TSqlObjectOptions)"/>, <see cref="M:Microsoft.SqlServer.Dac.Model.TSqlModel.DeleteObjects(System.String)"/> 
            and <see cref="M:Microsoft.SqlServer.Dac.Model.TSqlModel.ConvertToScriptedObject(Microsoft.SqlServer.Dac.Model.TSqlObject,System.String)"/>, the model throws <see cref="T:Microsoft.SqlServer.Dac.Model.DacModelException"/> signaling 
            the presence of model blocking errors. Model blocking errors indicates the presence of serious errors such as parser, interpreter and other errors in the objects.
            Setting this option to false allows building the model even if it has such serious errors. Subsequently those objects with model errors can be retrieved using the
            <see cref="M:Microsoft.SqlServer.Dac.Model.TSqlModel.GetModelErrors"/> method.
            
            When objects with model blocking errors are added to the model, the object is edited such that errant parts are removed or commented out in a 
            best effort manner to preserve the parts of the object that do not have errors. For instance a stored procedure that has a parser error in the procedure body 
            will have its body commented out before adding to the model. As a worst case the object is completely dropped while preserving the model errors.
            
            Note that current implementation handles objects with model errors as follows
            1) Sql procedures and views are added to the model with commented body.
            2) Other object types are completely dropped while preserving the model errors.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ModelMetadataClass">
            <summary>
            The metadata class for metadata properties.
            </summary>
            <remarks>
            <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModelSchema"/> metadata classes provide access to the structure and instance data
            within a <c>TSqlSchemaModel</c> instance.
            </remarks>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.ModelMetadataClass.GetValue``1(Microsoft.SqlServer.Dac.Model.TSqlObject)">
            <summary>
            Returns the metadata property value.
            </summary>
            <typeparam name="T"><see cref="T:System.Type"/> of the metadata property value.</typeparam>
            <param name="instance"><see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> instance to get the metadata property value from.</param>
            <returns>Metadata property value.</returns>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ModelMetadataClass.Name">
            <summary>
            Metadata property name.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ModelMetadataClass.DataType">
            <summary>
            Data type of the metadata property.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ModelMetadataClass.OwningType">
            <summary>
            Owning <see cref="T:Microsoft.SqlServer.Dac.Model.ModelTypeClass"/> for the <see cref="T:Microsoft.SqlServer.Dac.Model.ModelMetadataClass"/>.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ModelPropertyClass">
            <summary>
            The metadata class for properties.
            </summary>
            <remarks>
            <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModelSchema"/> metadata classes provide access to the structure and instance data
            within a <c>TSqlSchemaModel</c> instance.
            </remarks>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.ModelPropertyClass.GetValue``1(Microsoft.SqlServer.Dac.Model.TSqlObject)">
            <summary>
            Returns the property value.
            </summary>
            <typeparam name="T"><see cref="T:System.Type"/> of the property value.</typeparam>
            <param name="instance"><see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> instance to get the property value from.</param>
            <returns>Property value.</returns>
            <exception cref="T:System.InvalidCastException">
            If the property value cannot be cast to <typeparamref name="T"/>.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.ModelPropertyClass.GetDefaultValue``1(Microsoft.SqlServer.Dac.Model.SqlServerVersion)">
            <summary>
            Returns the default property value.
            
            Note: for <see cref="F:Microsoft.SqlServer.Dac.Model.SqlServerVersion.SqlAzure"/> the default value may depend on the
            <see cref="P:Microsoft.SqlServer.Dac.Model.TSqlModel.EngineVersion"/> being targeted. This method assumes the current default
            version is being used. To get a default value based on a particular for a particular EngineVersion, please use
            <see cref="M:Microsoft.SqlServer.Dac.Model.ModelPropertyClass.GetDefaultValue``1(Microsoft.SqlServer.Dac.Model.SqlServerVersion,System.Int32)"/>.
            </summary>
            <typeparam name="T"><see cref="T:System.Type"/> of the property value.</typeparam>
            <param name="version">The <see cref="T:Microsoft.SqlServer.Dac.Model.SqlServerVersion"/> to return the default value for.</param>
            <returns>Default value for specified <see cref="T:Microsoft.SqlServer.Dac.Model.SqlServerVersion"/>.</returns>
            <exception cref="T:System.InvalidCastException">
            If the property value cannot be cast to <typeparamref name="T"/>.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.ModelPropertyClass.GetDefaultValue(Microsoft.SqlServer.Dac.Model.SqlServerVersion)">
            <summary>
            Returns the default property value.
            
            Note: for <see cref="F:Microsoft.SqlServer.Dac.Model.SqlServerVersion.SqlAzure"/> the default value may depend on the
            <see cref="P:Microsoft.SqlServer.Dac.Model.TSqlModel.EngineVersion"/> being targeted. This method assumes the current default
            version is being used. To get a default value based on a particular for a particular EngineVersion, please use
            <see cref="M:Microsoft.SqlServer.Dac.Model.ModelPropertyClass.GetDefaultValue(Microsoft.SqlServer.Dac.Model.SqlServerVersion,System.Int32)"/>.
            </summary>
            <param name="version">The <see cref="T:Microsoft.SqlServer.Dac.Model.SqlServerVersion"/> to return the default value for.</param>
            <returns>Default value for specified <see cref="T:Microsoft.SqlServer.Dac.Model.SqlServerVersion"/>.</returns>        
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.ModelPropertyClass.IsDefaultValue(Microsoft.SqlServer.Dac.Model.TSqlObject,Microsoft.SqlServer.Dac.Model.SqlServerVersion)">
            <summary>
            Returns if the value is the platform default value.
            
            Note: for <see cref="F:Microsoft.SqlServer.Dac.Model.SqlServerVersion.SqlAzure"/> the default value may depend on the
            <see cref="P:Microsoft.SqlServer.Dac.Model.TSqlModel.EngineVersion"/> being targeted. This method assumes the current default
            version is being used. To validate the  default value based on a particular for a particular EngineVersion, please use
            <see cref="M:Microsoft.SqlServer.Dac.Model.ModelPropertyClass.IsDefaultValue(Microsoft.SqlServer.Dac.Model.TSqlObject,Microsoft.SqlServer.Dac.Model.SqlServerVersion,System.Int32)"/>.
            </summary>
            <param name="instance"><see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> instance to determine the default property value for.</param>
            <param name="version">The <see cref="T:Microsoft.SqlServer.Dac.Model.SqlServerVersion"/> to determine the default value for.</param>
            <returns>True if the property is the platform default. Otherwise false.</returns>
            <exception cref="T:Microsoft.SqlServer.Dac.Model.DacModelException">
            If the supplied <paramref name="instance"/> is not the owner of this property.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.ModelPropertyClass.GetDefaultValue``1(Microsoft.SqlServer.Dac.Model.SqlServerVersion,System.Int32)">
            <summary>
            Returns the default property value.
            Note: for <see cref="F:Microsoft.SqlServer.Dac.Model.SqlServerVersion.SqlAzure"/> the default value may depend on the
            <see cref="P:Microsoft.SqlServer.Dac.Model.TSqlModel.EngineVersion"/> being targeted. 
            </summary>
            <typeparam name="T"><see cref="T:System.Type"/> of the property value.</typeparam>
            <param name="version">The <see cref="T:Microsoft.SqlServer.Dac.Model.SqlServerVersion"/> to return the default value for.</param>
            <param name="engineVersion">
            Optional value for the engine version. This maps to the
            <see cref="P:Microsoft.SqlServer.Dac.Model.TSqlModel.EngineVersion"/> property on a model.
            </param>
            <returns>Default value for specified <see cref="T:Microsoft.SqlServer.Dac.Model.SqlServerVersion"/>.</returns>
            <exception cref="T:System.InvalidCastException">
            If the property value cannot be cast to <typeparamref name="T"/>.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.ModelPropertyClass.GetDefaultValue(Microsoft.SqlServer.Dac.Model.SqlServerVersion,System.Int32)">
            <summary>
            Returns the default property value.
            </summary>
            <param name="version">The <see cref="T:Microsoft.SqlServer.Dac.Model.SqlServerVersion"/> to return the default value for.</param>
            <param name="engineVersion">
            Optional value for the engine version. This maps to the <see cref="P:Microsoft.SqlServer.Dac.Model.TSqlModel.EngineVersion"/> property on a model.
            </param>
            <returns>Default value for specified <see cref="T:Microsoft.SqlServer.Dac.Model.SqlServerVersion"/>.</returns>        
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.ModelPropertyClass.IsDefaultValue(Microsoft.SqlServer.Dac.Model.TSqlObject,Microsoft.SqlServer.Dac.Model.SqlServerVersion,System.Int32)">
            <summary>
            Returns if the value is the platform default value.
            </summary>
            <param name="instance"><see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> instance to determine the default property value for.</param>
            <param name="version">The <see cref="T:Microsoft.SqlServer.Dac.Model.SqlServerVersion"/> to determine the default value for.</param>
            <param name="engineVersion">
            Optional value for the engine version. This maps to the <see cref="P:Microsoft.SqlServer.Dac.Model.TSqlModel.EngineVersion"/> property on a model.
            </param>
            <returns>True if the property is the platform default. Otherwise false.</returns>
            <exception cref="T:Microsoft.SqlServer.Dac.Model.DacModelException">
            If the supplied <paramref name="instance"/> is not the owner of this property.
            </exception>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ModelPropertyClass.Name">
            <summary>
            Property name.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ModelPropertyClass.DataType">
            <summary>
            Data type of the property.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ModelPropertyClass.SupportedPlatforms">
            <summary>
            The <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlPlatforms"/> versions on which this relationship is supported.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ModelPropertyClass.OwningType">
            <summary>
            Owning <see cref="T:Microsoft.SqlServer.Dac.Model.ModelTypeClass"/> for the property, where this 
            property is attached to a Type. Null if this property is on a 
            <see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipClass"/>
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ModelPropertyClass.OwningRelationship">
            <summary>
            Owning <see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipClass"/> for the property, where this 
            property is attached to a Relationship. Null if this property is on a 
            <see cref="T:Microsoft.SqlServer.Dac.Model.ModelTypeClass"/>
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipClass">
            <summary>
            The metadata class for relationships.
            </summary>
            <remarks>
            <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModelSchema"/> metadata classes provide access to the structure and instance data
            within a <c>TSqlSchemaModel</c> instance.
            </remarks>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ModelRelationshipClass.Name">
            <summary>
            Relationship name.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ModelRelationshipClass.Type">
            <summary>
            Type of the relationship.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ModelRelationshipClass.FromObjectClass">
            <summary>
            The <see cref="T:Microsoft.SqlServer.Dac.Model.ModelTypeClass"/> of the referencing object for the relationship.
            This represents the class of objects the relationship comes from
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ModelRelationshipClass.SupportedPlatforms">
            <summary>
            The <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlPlatforms"/> versions on which this relationship is supported.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ModelRelationshipClass.Properties">
            <summary>
            Properties for the relationship.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance">
            <summary>
            Represents a reference from one <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> to another, which might be unresolved.
            </summary>
            <remarks>
            <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModelSchema"/> metadata classes provide access to the structure and instance data
            within a <c>TSqlModelSchema</c> instance.
            </remarks>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance.GetProperty``1(Microsoft.SqlServer.Dac.Model.ModelPropertyClass)">
            <summary>
            Retrieves properties for this relationship instance.
            </summary>
            <typeparam name="T"><see cref="T:System.Type"/> of the property value.</typeparam>
            <param name="property"><see cref="T:Microsoft.SqlServer.Dac.Model.ModelPropertyClass"/> property to retrieve.</param>
            <returns>Property value.</returns>
            <exception cref="T:Microsoft.SqlServer.Dac.Model.DacModelException">
            If the supplied <paramref name="property"/> is not supported on this instance.
            </exception>
            <exception cref="T:System.InvalidCastException">
            If the property type cannot be cast to T.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance.GetProperty(Microsoft.SqlServer.Dac.Model.ModelPropertyClass)">
            <summary>
            Retrieves properties for this relationship instance.
            </summary>
            <param name="property"><see cref="T:Microsoft.SqlServer.Dac.Model.ModelPropertyClass"/> property to retrieve.</param>
            <returns>Property value.</returns>
            <exception cref="T:Microsoft.SqlServer.Dac.Model.DacModelException">
            If the supplied <paramref name="property"/> is not supported on this instance.
            </exception>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance.Relationship">
            <summary>
            The <see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipClass"/> this instance represents.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance.FromObject">
            <summary>
            The <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> this instance is from. This is the referencing object
            </summary>
            <remarks>
            This property returns null if the relationship is unresolved or refers to elements outside the current <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/>.
            </remarks>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance.Object">
            <summary>
            The <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> this instance references. This is the referenced object.
            </summary>
            <remarks>
            This property returns null if the relationship is unresolved or refers to elements outside the current <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/>.
            </remarks>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance.ObjectName">
            <summary>
            The <see cref="T:Microsoft.SqlServer.Dac.Model.ObjectIdentifier"/> representing the name of the referenced object.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance.PropertyContext">
            <summary>
            The context boject to use for property lookup - if this isn't set then <see cref="M:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance.GetProperty``1(Microsoft.SqlServer.Dac.Model.ModelPropertyClass)"/>
            is not supported on this <see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance"/>. For internal use only
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance.Item(Microsoft.SqlServer.Dac.Model.ModelPropertyClass)">
            <summary>
            Retrieves properties for this relationship instance.
            </summary>
            <param name="property"><see cref="T:Microsoft.SqlServer.Dac.Model.ModelPropertyClass"/> property to retrieve.</param>
            <returns>Property value.</returns>
            <exception cref="T:Microsoft.SqlServer.Dac.Model.DacModelException">
            If the supplied <paramref name="property"/> is not supported on this instance.
            </exception>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ModelSchema">
            <summary>
            Model schema for TSqlModel
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.ModelSchema.InitializeModelSchema">
            <summary>
            The ModelSchema has static state that is extremely useful when navigating a model's
            contents.  Under normal circumstances (use of ) the static state is indirectly initialized and clients 
            can use the state oblivious to how it has been initialized.  In other heads (commandline / API / unit tests) it is possible
            for the static state to be uninitialized prior to it's being used causing unexpected nulls and failures.  When implementing
            a new head that may directly use the ModelSchema prior to instantiating a TSqlModel call this method prior to
            accessing any static state.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.ModelSchema.GetViewSubroutineAndTriggerClasses">
            <summary>
            Gets the set of classes representing Views, Subroutines and Triggers. This is a common set of classes used during
            analysis
            </summary>
            <returns>The <see cref="T:Microsoft.SqlServer.Dac.Model.ModelTypeClass"/>es representing view, subroutines and triggers</returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.ModelSchema.GetSubroutineClasses">
            <summary>
            Gets the set of classes representing Subroutines. This is a common set of classes used during
            analysis
            </summary>
            <returns>The <see cref="T:Microsoft.SqlServer.Dac.Model.ModelTypeClass"/>es representing subroutines</returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.ModelSchema.GetColumnSourceClasses">
            <summary>
            Gets the set of classes representing a potential source of columns. Tables, Views, Functions can all be 
            a source for this
            </summary>
            <returns>The <see cref="T:Microsoft.SqlServer.Dac.Model.ModelTypeClass"/>es representing view, subroutines and triggers</returns>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.SchemaInstance">
            <summary>
            Instance of the model schema
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.Column">
            <summary>
            Model type class for Column
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.TableValuedFunction">
            <summary>
            Model type class for TableValuedFunction
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.ScalarFunction">
            <summary>
            Model type class for ScalarFunction
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.ClrTableOption">
            <summary>
            Model type class for ClrTableOption
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.Aggregate">
            <summary>
            Model type class for Aggregate
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.ApplicationRole">
            <summary>
            Model type class for ApplicationRole
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.Index">
            <summary>
            Model type class for Index
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.Assembly">
            <summary>
            Model type class for Assembly
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.AssemblySource">
            <summary>
            Model type class for AssemblySource
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.AsymmetricKey">
            <summary>
            Model type class for AsymmetricKey
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.AuditAction">
            <summary>
            Model type class for AuditAction
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.AuditActionGroup">
            <summary>
            Model type class for AuditActionGroup
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.AuditActionSpecification">
            <summary>
            Model type class for AuditActionSpecification
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.BrokerPriority">
            <summary>
            Model type class for BrokerPriority
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.BuiltInServerRole">
            <summary>
            Model type class for BuiltInServerRole
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.DataType">
            <summary>
            Model type class for DataType
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.Certificate">
            <summary>
            Model type class for Certificate
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.CheckConstraint">
            <summary>
            Model type class for CheckConstraint
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.ClrTypeMethod">
            <summary>
            Model type class for ClrTypeMethod
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.ClrTypeMethodParameter">
            <summary>
            Model type class for ClrTypeMethodParameter
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.ClrTypeProperty">
            <summary>
            Model type class for ClrTypeProperty
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.ColumnStoreIndex">
            <summary>
            Model type class for ColumnStoreIndex
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.Contract">
            <summary>
            Model type class for Contract
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.Credential">
            <summary>
            Model type class for Credential
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.DatabaseCredential">
            <summary>
            Model type class for DatabaseCredential
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.CryptographicProvider">
            <summary>
            Model type class for CryptographicProvider
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.DatabaseAuditSpecification">
            <summary>
            Model type class for DatabaseAuditSpecification
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.DatabaseDdlTrigger">
            <summary>
            Model type class for DatabaseDdlTrigger
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.DatabaseEncryptionKey">
            <summary>
            Model type class for DatabaseEncryptionKey
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.DatabaseEventNotification">
            <summary>
            Model type class for DatabaseEventNotification
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.DatabaseMirroringLanguageSpecifier">
            <summary>
            Model type class for DatabaseMirroringLanguageSpecifier
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.DatabaseOptions">
            <summary>
            Model type class for DatabaseOptions
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.DataCompressionOption">
            <summary>
            Model type class for DataCompressionOption
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.Default">
            <summary>
            Model type class for Default
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.DefaultConstraint">
            <summary>
            Model type class for DefaultConstraint
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.DmlTrigger">
            <summary>
            Model type class for DmlTrigger
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.Endpoint">
            <summary>
            Model type class for Endpoint
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.ErrorMessage">
            <summary>
            Model type class for ErrorMessage
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.EventGroup">
            <summary>
            Model type class for EventGroup
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.EventSession">
            <summary>
            Model type class for EventSession
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.DatabaseEventSession">
            <summary>
            Model type class for DatabaseEventSession
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.EventSessionAction">
            <summary>
            Model type class for EventSessionAction
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.EventSessionDefinitions">
            <summary>
            Model type class for EventSessionDefinitions
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.EventSessionSetting">
            <summary>
            Model type class for EventSessionSetting
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.EventSessionTarget">
            <summary>
            Model type class for EventSessionTarget
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.EventTypeSpecifier">
            <summary>
            Model type class for EventTypeSpecifier
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.ExtendedProcedure">
            <summary>
            Model type class for ExtendedProcedure
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.ExtendedProperty">
            <summary>
            Model type class for ExtendedProperty
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.ExternalDataSource">
            <summary>
            Model type class for ExternalDataSource
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.ExternalFileFormat">
            <summary>
            Model type class for ExternalFileFormat
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.ExternalTable">
            <summary>
            Model type class for ExternalTable
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.SqlFile">
            <summary>
            Model type class for SqlFile
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.Filegroup">
            <summary>
            Model type class for Filegroup
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.ForeignKeyConstraint">
            <summary>
            Model type class for ForeignKeyConstraint
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.FullTextCatalog">
            <summary>
            Model type class for FullTextCatalog
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.FullTextIndex">
            <summary>
            Model type class for FullTextIndex
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.FullTextIndexColumnSpecifier">
            <summary>
            Model type class for FullTextIndexColumnSpecifier
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.FullTextStopList">
            <summary>
            Model type class for FullTextStopList
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.HttpProtocolSpecifier">
            <summary>
            Model type class for HttpProtocolSpecifier
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.LinkedServer">
            <summary>
            Model type class for LinkedServer
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.LinkedServerLogin">
            <summary>
            Model type class for LinkedServerLogin
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.Login">
            <summary>
            Model type class for Login
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.MasterKey">
            <summary>
            Model type class for MasterKey
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.MessageType">
            <summary>
            Model type class for MessageType
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.PartitionFunction">
            <summary>
            Model type class for PartitionFunction
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.PartitionScheme">
            <summary>
            Model type class for PartitionScheme
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.PartitionValue">
            <summary>
            Model type class for PartitionValue
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.Permission">
            <summary>
            Model type class for Permission
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.PrimaryKeyConstraint">
            <summary>
            Model type class for PrimaryKeyConstraint
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.Procedure">
            <summary>
            Model type class for Procedure
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.Queue">
            <summary>
            Model type class for Queue
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.QueueEventNotification">
            <summary>
            Model type class for QueueEventNotification
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.RemoteServiceBinding">
            <summary>
            Model type class for RemoteServiceBinding
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.ResourceGovernor">
            <summary>
            Model type class for ResourceGovernor
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.ResourcePool">
            <summary>
            Model type class for ResourcePool
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.Role">
            <summary>
            Model type class for Role
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.RoleMembership">
            <summary>
            Model type class for RoleMembership
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.Route">
            <summary>
            Model type class for Route
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.Rule">
            <summary>
            Model type class for Rule
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.Schema">
            <summary>
            Model type class for Schema
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.SearchProperty">
            <summary>
            Model type class for SearchProperty
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.SearchPropertyList">
            <summary>
            Model type class for SearchPropertyList
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.SecurityPolicy">
            <summary>
            Model type class for SecurityPolicy
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.SecurityPredicate">
            <summary>
            Model type class for SecurityPredicate
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.Sequence">
            <summary>
            Model type class for Sequence
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.ServerAudit">
            <summary>
            Model type class for ServerAudit
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.ServerAuditSpecification">
            <summary>
            Model type class for ServerAuditSpecification
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.ServerDdlTrigger">
            <summary>
            Model type class for ServerDdlTrigger
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.ServerEventNotification">
            <summary>
            Model type class for ServerEventNotification
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.ServerOptions">
            <summary>
            Model type class for ServerOptions
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.ServerRoleMembership">
            <summary>
            Model type class for ServerRoleMembership
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.Service">
            <summary>
            Model type class for Service
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.ServiceBrokerLanguageSpecifier">
            <summary>
            Model type class for ServiceBrokerLanguageSpecifier
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.Signature">
            <summary>
            Model type class for Signature
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.SignatureEncryptionMechanism">
            <summary>
            Model type class for SignatureEncryptionMechanism
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.SoapLanguageSpecifier">
            <summary>
            Model type class for SoapLanguageSpecifier
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.SoapMethodSpecification">
            <summary>
            Model type class for SoapMethodSpecification
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.SpatialIndex">
            <summary>
            Model type class for SpatialIndex
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.Statistics">
            <summary>
            Model type class for Statistics
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.Parameter">
            <summary>
            Model type class for Parameter
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.SymmetricKey">
            <summary>
            Model type class for SymmetricKey
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.SymmetricKeyPassword">
            <summary>
            Model type class for SymmetricKeyPassword
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.Synonym">
            <summary>
            Model type class for Synonym
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.Table">
            <summary>
            Model type class for Table
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.FileTable">
            <summary>
            Model type class for FileTable
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.TableType">
            <summary>
            Model type class for TableType
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.TableTypeCheckConstraint">
            <summary>
            Model type class for TableTypeCheckConstraint
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.TableTypeColumn">
            <summary>
            Model type class for TableTypeColumn
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.TableTypeDefaultConstraint">
            <summary>
            Model type class for TableTypeDefaultConstraint
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.TableTypeIndex">
            <summary>
            Model type class for TableTypeIndex
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.TableTypePrimaryKeyConstraint">
            <summary>
            Model type class for TableTypePrimaryKeyConstraint
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.TableTypeUniqueConstraint">
            <summary>
            Model type class for TableTypeUniqueConstraint
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.TcpProtocolSpecifier">
            <summary>
            Model type class for TcpProtocolSpecifier
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.UniqueConstraint">
            <summary>
            Model type class for UniqueConstraint
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.User">
            <summary>
            Model type class for User
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.UserDefinedServerRole">
            <summary>
            Model type class for UserDefinedServerRole
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.UserDefinedType">
            <summary>
            Model type class for UserDefinedType
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.View">
            <summary>
            Model type class for View
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.WorkloadGroup">
            <summary>
            Model type class for WorkloadGroup
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.XmlIndex">
            <summary>
            Model type class for XmlIndex
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.SelectiveXmlIndex">
            <summary>
            Model type class for SelectiveXmlIndex
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.XmlNamespace">
            <summary>
            Model type class for XmlNamespace
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.PromotedNodePathForXQueryType">
            <summary>
            Model type class for PromotedNodePathForXQueryType
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.PromotedNodePathForSqlType">
            <summary>
            Model type class for PromotedNodePathForSqlType
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ModelSchema.XmlSchemaCollection">
            <summary>
            Model type class for XmlSchemaCollection
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ColumnType">
            <summary>
            Specifies the type of Column a TSqlObject represents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ColumnType.Column">
            <summary>
            Column
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ColumnType.ComputedColumn">
            <summary>
            ComputedColumn
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ColumnType.ColumnSet">
            <summary>
            ColumnSet
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.TableTypeColumnType">
            <summary>
            Specifies the type of TableTypeColumn a TSqlObject represents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.TableTypeColumnType.Column">
            <summary>
            Column
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.TableTypeColumnType.ComputedColumn">
            <summary>
            ComputedColumn
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.FunctionType">
            <summary>
            Specifies the type of Function a TSqlObject represents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.FunctionType.InlineTableValuedFunction">
            <summary>
            InlineTableValuedFunction
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.FunctionType.MultiStatementTableValuedFunction">
            <summary>
            MultiStatementTableValuedFunction
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.SqlDataType">
            <summary>
            SQL Server built-in data types
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlDataType.Unknown">
            <summary>
            Nothing was defined.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlDataType.BigInt">
            <summary>
            Integer (whole number) data from -2^63 (-9,223,372,036,854,775,808) through 2^63-1 (9,223,372,036,854,775,807).
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlDataType.Int">
            <summary>
            Integer (whole number) data from -2^31 (-2,147,483,648) through 2^31 - 1 (2,147,483,647).
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlDataType.SmallInt">
            <summary>
            Integer data from -2^15 (-32,768) through 2^15 - 1 (32,767).
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlDataType.TinyInt">
            <summary>
            Integer data from 0 through 255.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlDataType.Bit">
            <summary>
            Integer data with either a 1 or 0 value.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlDataType.Decimal">
            <summary>
            Fixed precision and scale numeric data from -10^38 +1 through 10^38 -1.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlDataType.Numeric">
            <summary>
            Functionally equivalent to decimal.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlDataType.Money">
            <summary>
            Monetary data values from -2^63 (-922,337,203,685,477.5808) through 2^63 - 1 (+922,337,203,685,477.5807), with accuracy to a ten-thousandth of a monetary unit.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlDataType.SmallMoney">
            <summary>
            Monetary data values from -214,748.3648 through +214,748.3647, with accuracy to a ten-thousandth of a monetary unit.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlDataType.Float">
            <summary>
            Floating precision number data with the following valid values: -1.79E + 308 through -2.23E - 308, 0 and 2.23E + 308 through 1.79E + 308.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlDataType.Real">
            <summary>
            Floating precision number data with the following valid values: -3.40E + 38 through -1.18E - 38, 0 and 1.18E - 38 through 3.40E + 38.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlDataType.DateTime">
            <summary>
            Date and time data from January 1, 1753, through December 31, 9999, with an accuracy of three-hundredths of a second, or 3.33 milliseconds.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlDataType.SmallDateTime">
            <summary>
            Date and time data from January 1, 1900, through June 6, 2079, with an accuracy of one minute.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlDataType.Char">
            <summary>
            Fixed-length non-Unicode character data with a maximum length of 8,000 characters.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlDataType.VarChar">
            <summary>
            Variable-length non-Unicode data with a maximum of 8,000 characters.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlDataType.Text">
            <summary>
            Variable-length non-Unicode data with a maximum length of 2^31 - 1 (2,147,483,647) characters.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlDataType.NChar">
            <summary>
            Fixed-length Unicode data with a maximum length of 4,000 characters.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlDataType.NVarChar">
            <summary>
            Variable-length Unicode data with a maximum length of 4,000 characters. sysname is a system-supplied user-defined data type that is functionally equivalent to nvarchar(128) and is used to reference database object names.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlDataType.NText">
            <summary>
            Variable-length Unicode data with a maximum length of 2^30 - 1 (1,073,741,823) characters.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlDataType.Binary">
            <summary>
            Fixed-length binary data with a maximum length of 8,000 bytes.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlDataType.VarBinary">
            <summary>
            Variable-length binary data with a maximum length of 8,000 bytes.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlDataType.Image">
            <summary>
            Variable-length binary data with a maximum length of 2^31 - 1 (2,147,483,647) bytes.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlDataType.Cursor">
            <summary>
            A reference to a cursor.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlDataType.Variant">
            <summary>
            A data type that stores values of various SQL Server-supported data types, except text, ntext, timestamp, and sql_variant.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlDataType.Table">
            <summary>
            A special data type used to store a result set for later processing.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlDataType.Timestamp">
            <summary>
            A database-wide unique number that gets updated every time a row gets updated.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlDataType.UniqueIdentifier">
            <summary>
            Is a 16-byte GUID
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlDataType.Xml">
            <summary>
            xml data type
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlDataType.Date">
            <summary>
            Date-only
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlDataType.Time">
            <summary>
            Time only
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlDataType.DateTime2">
            <summary>
            Combination of data and time types, better precision than DataTime
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlDataType.DateTimeOffset">
            <summary>
            Same as DateTime2 with timezone offset added
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlDataType.Rowversion">
            <summary>
            (Alias for Timestamp) A database-wide unique number that gets updated every time a row gets updated.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.PermissionType">
            <summary>
            Sql permissions
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.Unknown">
            <summary>
            Unknown
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.Insert">
            <summary>
            Insert
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.Select">
            <summary>
            Select
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.Update">
            <summary>
            Update
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.Delete">
            <summary>
            Delete
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.References">
            <summary>
            References
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.CreateDatabase">
            <summary>
            CreateDatabase
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.CreateDefault">
            <summary>
            CreateDefault
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.CreateFunction">
            <summary>
            CreateFunction
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.CreateProcedure">
            <summary>
            CreateProcedure
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.CreateRule">
            <summary>
            CreateRule
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.CreateTable">
            <summary>
            CreateTable
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.CreateView">
            <summary>
            CreateView
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.BackupDatabase">
            <summary>
            BackupDatabase
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.BackupLog">
            <summary>
            BackupLog
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.AdministerBulkOperations">
            <summary>
            AdministerBulkOperations
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.Alter">
            <summary>
            Alter
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.AlterAnyApplicationRole">
            <summary>
            AlterAnyApplicationRole
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.AlterAnyAssembly">
            <summary>
            AlterAnyAssembly
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.AlterAnyAsymmetricKey">
            <summary>
            AlterAnyAsymmetricKey
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.AlterAnyCertificate">
            <summary>
            AlterAnyCertificate
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.AlterAnyConnection">
            <summary>
            AlterAnyConnection
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.AlterAnyContract">
            <summary>
            AlterAnyContract
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.AlterAnyCredential">
            <summary>
            AlterAnyCredential
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.AlterAnyDatabase">
            <summary>
            AlterAnyDatabase
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.AlterAnyDatabaseDdlTrigger">
            <summary>
            AlterAnyDatabaseDdlTrigger
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.AlterAnyDatabaseEventNotification">
            <summary>
            AlterAnyDatabaseEventNotification
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.AlterAnyDataspace">
            <summary>
            AlterAnyDataspace
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.AlterAnyEndpoint">
            <summary>
            AlterAnyEndpoint
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.AlterAnyEventNotification">
            <summary>
            AlterAnyEventNotification
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.AlterAnyFulltextCatalog">
            <summary>
            AlterAnyFulltextCatalog
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.AlterAnyLinkedServer">
            <summary>
            AlterAnyLinkedServer
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.AlterAnyLogin">
            <summary>
            AlterAnyLogin
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.AlterAnyMessageType">
            <summary>
            AlterAnyMessageType
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.AlterAnyRemoteServiceBinding">
            <summary>
            AlterAnyRemoteServiceBinding
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.AlterAnyRole">
            <summary>
            AlterAnyRole
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.AlterAnyRoute">
            <summary>
            AlterAnyRoute
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.AlterAnySchema">
            <summary>
            AlterAnySchema
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.AlterAnyService">
            <summary>
            AlterAnyService
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.AlterAnySymmetricKey">
            <summary>
            AlterAnySymmetricKey
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.AlterAnyUser">
            <summary>
            AlterAnyUser
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.AlterResources">
            <summary>
            AlterResources
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.AlterServerState">
            <summary>
            AlterServerState
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.AlterSettings">
            <summary>
            AlterSettings
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.AlterTrace">
            <summary>
            AlterTrace
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.Authenticate">
            <summary>
            Authenticate
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.AuthenticateServer">
            <summary>
            AuthenticateServer
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.Checkpoint">
            <summary>
            Checkpoint
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.Connect">
            <summary>
            Connect
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.ConnectReplication">
            <summary>
            ConnectReplication
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.ConnectSql">
            <summary>
            ConnectSql
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.Control">
            <summary>
            Control
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.ControlServer">
            <summary>
            ControlServer
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.CreateAggregate">
            <summary>
            CreateAggregate
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.CreateAnyDatabase">
            <summary>
            CreateAnyDatabase
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.CreateAssembly">
            <summary>
            CreateAssembly
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.CreateAsymmetricKey">
            <summary>
            CreateAsymmetricKey
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.CreateCertificate">
            <summary>
            CreateCertificate
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.CreateContract">
            <summary>
            CreateContract
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.CreateDatabaseDdlEventNotification">
            <summary>
            CreateDatabaseDdlEventNotification
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.CreateDdlEventNotification">
            <summary>
            CreateDdlEventNotification
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.CreateEndpoint">
            <summary>
            CreateEndpoint
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.CreateFulltextCatalog">
            <summary>
            CreateFulltextCatalog
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.CreateMessageType">
            <summary>
            CreateMessageType
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.CreateQueue">
            <summary>
            CreateQueue
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.CreateRemoteServiceBinding">
            <summary>
            CreateRemoteServiceBinding
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.CreateRole">
            <summary>
            CreateRole
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.CreateRoute">
            <summary>
            CreateRoute
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.CreateSchema">
            <summary>
            CreateSchema
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.CreateService">
            <summary>
            CreateService
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.CreateSymmetricKey">
            <summary>
            CreateSymmetricKey
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.CreateSynonym">
            <summary>
            CreateSynonym
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.CreateTraceEventNotification">
            <summary>
            CreateTraceEventNotification
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.CreateType">
            <summary>
            CreateType
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.CreateXmlSchemaCollection">
            <summary>
            CreateXmlSchemaCollection
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.Execute">
            <summary>
            Execute
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.ExternalAccessAssembly">
            <summary>
            ExternalAccessAssembly
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.Impersonate">
            <summary>
            Impersonate
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.Receive">
            <summary>
            Receive
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.Send">
            <summary>
            Send
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.Showplan">
            <summary>
            Showplan
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.Shutdown">
            <summary>
            Shutdown
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.SubscribeQueryNotifications">
            <summary>
            SubscribeQueryNotifications
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.TakeOwnership">
            <summary>
            TakeOwnership
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.UnsafeAssembly">
            <summary>
            UnsafeAssembly
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.ViewAnyDatabase">
            <summary>
            ViewAnyDatabase
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.ViewAnyDefinition">
            <summary>
            ViewAnyDefinition
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.ViewChangeTracking">
            <summary>
            ViewChangeTracking
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.ViewDatabaseState">
            <summary>
            ViewDatabaseState
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.ViewDefinition">
            <summary>
            ViewDefinition
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.ViewServerState">
            <summary>
            ViewServerState
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.All">
            <summary>
            All
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.AlterAnyDatabaseAudit">
            <summary>
            AlterAnyDatabaseAudit
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.AlterAnyServerAudit">
            <summary>
            AlterAnyServerAudit
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.CreateSequence">
            <summary>
            CreateSequence
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.AlterAnyServerRole">
            <summary>
            AlterAnyServerRole
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.CreateServerRole">
            <summary>
            CreateServerRole
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.CreateAvailabilityGroup">
            <summary>
            CreateAvailabilityGroup
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.AlterAnyAvailabilityGroup">
            <summary>
            AlterAnyAvailabilityGroup
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.AlterAnyDatabaseEventSession">
            <summary>
            AlterAnyDatabaseEventSession
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.ConnectAnyDatabase">
            <summary>
            ConnectAnyDatabase
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.ImpersonateAnyLogin">
            <summary>
            ImpersonateAnyLogin
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.SelectAllUserSecurables">
            <summary>
            SelectAllUserSecurables
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.AlterAnySecurityPolicy">
            <summary>
            AlterAnySecurityPolicy
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.AlterAnyColumnEncryptionKey">
            <summary>
            AlterAnyColumnEncryptionKey
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.AlterAnyColumnMasterKey">
            <summary>
            AlterAnyColumnMasterKey
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.Unmask">
            <summary>
            Unmask
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.AlterAnyMask">
            <summary>
            AlterAnyMask
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.ViewAnyColumnMasterKeyDefinition">
            <summary>
            ViewAnyColumnMasterKeyDefinition
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.ViewAnyColumnEncryptionKeyDefinition">
            <summary>
            ViewAnyColumnEncryptionKeyDefinition
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.AlterAnyExternalDataSource">
            <summary>
            AlterAnyExternalDataSource
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionType.AlterAnyExternalFileFormat">
            <summary>
            AlterAnyExternalFileFormat
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.AuthenticationModes">
            <summary>
            SQL Server 2005 authentication mode
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuthenticationModes.None">
            <summary>
            None
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuthenticationModes.Basic">
            <summary>
            Basic
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuthenticationModes.Digest">
            <summary>
            Digest
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuthenticationModes.Integrated">
            <summary>
            Integrated
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuthenticationModes.Ntlm">
            <summary>
            Ntlm
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuthenticationModes.Kerberos">
            <summary>
            Kerberos
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuthenticationModes.Negotiate">
            <summary>
            Negotiate
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.LockEscalationMethod">
            <summary>
            The types of lock escalation methods
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.LockEscalationMethod.Table">
            <summary>
            Table
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.LockEscalationMethod.Disable">
            <summary>
            Disable
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.LockEscalationMethod.Auto">
            <summary>
            Auto
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.CharacterSet">
            <summary>
            Possible character sets for SOAP endpoints
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.CharacterSet.Unknown">
            <summary>
            Unknown
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.CharacterSet.Sql">
            <summary>
            Sql
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.CharacterSet.Xml">
            <summary>
            Xml
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.DatabaseMirroringRole">
            <summary>
            Database mirroring role types for SQL Server 2005
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.DatabaseMirroringRole.Unknown">
            <summary>
            Unknown
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.DatabaseMirroringRole.Witness">
            <summary>
            Witness
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.DatabaseMirroringRole.Partner">
            <summary>
            Partner
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.DatabaseMirroringRole.All">
            <summary>
            All
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.PageVerifyMode">
            <summary>
            Database page verify mode for SQL Server 2005
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PageVerifyMode.Unknown">
            <summary>
            Unknown
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PageVerifyMode.Checksum">
            <summary>
            Checksum
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PageVerifyMode.TornPageDetection">
            <summary>
            TornPageDetection
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PageVerifyMode.None">
            <summary>
            None
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.EncryptionMode">
            <summary>
            Encryption mode for service broker endpoints
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EncryptionMode.Unknown">
            <summary>
            Unknown
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EncryptionMode.Disabled">
            <summary>
            Disabled
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EncryptionMode.Supported">
            <summary>
            Supported
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EncryptionMode.Required">
            <summary>
            Required
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.HttpPorts">
            <summary>
            Listening port types associated with an endpoint.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.HttpPorts.None">
            <summary>
            None
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.HttpPorts.Clear">
            <summary>
            Clear
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.HttpPorts.Ssl">
            <summary>
            Ssl
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.SoapLoginType">
            <summary>
            Possible values for LOGIN_TYPE option in SOAP endpoint
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SoapLoginType.Unknown">
            <summary>
            Unknown
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SoapLoginType.Mixed">
            <summary>
            Mixed
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SoapLoginType.Windows">
            <summary>
            Windows
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ParameterizationOption">
            <summary>
            Parameterization options for database
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ParameterizationOption.Unknown">
            <summary>
            Unknown
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ParameterizationOption.Simple">
            <summary>
            Simple
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ParameterizationOption.Forced">
            <summary>
            Forced
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ServiceBrokerEncryptionAlgorithm">
            <summary>
            Possible encryption algorithm options for service broker endpoints
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ServiceBrokerEncryptionAlgorithm.Unknown">
            <summary>
            Unknown
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ServiceBrokerEncryptionAlgorithm.Aes">
            <summary>
            Aes
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ServiceBrokerEncryptionAlgorithm.RC4">
            <summary>
            RC4
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ServiceBrokerOption">
            <summary>
            Possible service broker options for database
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ServiceBrokerOption.Unknown">
            <summary>
            Unknown
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ServiceBrokerOption.EnableBroker">
            <summary>
            EnableBroker
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ServiceBrokerOption.DisableBroker">
            <summary>
            DisableBroker
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ServiceBrokerOption.NewBroker">
            <summary>
            NewBroker
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ServiceBrokerOption.ErrorBrokerConversations">
            <summary>
            ErrorBrokerConversations
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.SoapFormat">
            <summary>
            Possible webmethod formats for SOAP endpoints
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SoapFormat.Unknown">
            <summary>
            Unknown
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SoapFormat.AllResults">
            <summary>
            AllResults
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SoapFormat.RowsetsOnly">
            <summary>
            RowsetsOnly
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SoapFormat.None">
            <summary>
            None
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.SoapSchema">
            <summary>
            Possible schema options for webmethods in SOAP endpoints
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SoapSchema.Unknown">
            <summary>
            Unknown
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SoapSchema.None">
            <summary>
            None
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SoapSchema.Standard">
            <summary>
            Standard
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SoapSchema.Default">
            <summary>
            Default
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.AssemblyPermissionSet">
            <summary>
            Possible permission sets for an assembly
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AssemblyPermissionSet.Unknown">
            <summary>
            Unknown
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AssemblyPermissionSet.Safe">
            <summary>
            Safe
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AssemblyPermissionSet.ExternalAccess">
            <summary>
            ExternalAccess
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AssemblyPermissionSet.Unsafe">
            <summary>
            Unsafe
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.AsymmetricKeyAlgorithm">
            <summary>
            Algorithm for an asymmetric keys
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AsymmetricKeyAlgorithm.Unknown">
            <summary>
            Unknown
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AsymmetricKeyAlgorithm.Rsa512">
            <summary>
            Rsa512
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AsymmetricKeyAlgorithm.Rsa1024">
            <summary>
            Rsa1024
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AsymmetricKeyAlgorithm.Rsa2048">
            <summary>
            Rsa2048
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.SymmetricKeyAlgorithm">
            <summary>
            Algorithms used for symmetric keys
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SymmetricKeyAlgorithm.Unknown">
            <summary>
            Unknown
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SymmetricKeyAlgorithm.Des">
            <summary>
            Des
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SymmetricKeyAlgorithm.TripleDes">
            <summary>
            TripleDes
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SymmetricKeyAlgorithm.RC2">
            <summary>
            RC2
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SymmetricKeyAlgorithm.RC4">
            <summary>
            RC4
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SymmetricKeyAlgorithm.DesX">
            <summary>
            DesX
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SymmetricKeyAlgorithm.Aes128">
            <summary>
            Aes128
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SymmetricKeyAlgorithm.Aes192">
            <summary>
            Aes192
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SymmetricKeyAlgorithm.Aes256">
            <summary>
            Aes256
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SymmetricKeyAlgorithm.RC4128">
            <summary>
            RC4128
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.AuditActionGroupType">
            <summary>
            SQL Server audit action groups
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.None">
            <summary>
            None
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.SuccessfulLogin">
            <summary>
            SuccessfulLogin
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.Logout">
            <summary>
            Logout
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.ServerStateChange">
            <summary>
            ServerStateChange
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.FailedLogin">
            <summary>
            FailedLogin
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.LoginChangePassword">
            <summary>
            LoginChangePassword
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.ServerRoleMemberChange">
            <summary>
            ServerRoleMemberChange
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.ServerPrincipalImpersonation">
            <summary>
            ServerPrincipalImpersonation
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.ServerObjectOwnershipChange">
            <summary>
            ServerObjectOwnershipChange
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.DatabaseMirroringLogin">
            <summary>
            DatabaseMirroringLogin
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.BrokerLogin">
            <summary>
            BrokerLogin
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.ServerPermissionChange">
            <summary>
            ServerPermissionChange
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.ServerObjectPermissionChange">
            <summary>
            ServerObjectPermissionChange
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.ServerOperation">
            <summary>
            ServerOperation
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.TraceChange">
            <summary>
            TraceChange
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.ServerObjectChange">
            <summary>
            ServerObjectChange
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.ServerPrincipalChange">
            <summary>
            ServerPrincipalChange
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.DatabasePermissionChange">
            <summary>
            DatabasePermissionChange
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.SchemaObjectPermissionChange">
            <summary>
            SchemaObjectPermissionChange
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.DatabaseRoleMemberChange">
            <summary>
            DatabaseRoleMemberChange
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.ApplicationRoleChangePassword">
            <summary>
            ApplicationRoleChangePassword
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.SchemaObjectAccess">
            <summary>
            SchemaObjectAccess
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.BackupRestore">
            <summary>
            BackupRestore
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.Dbcc">
            <summary>
            Dbcc
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.AuditChange">
            <summary>
            AuditChange
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.DatabaseChange">
            <summary>
            DatabaseChange
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.DatabaseObjectChange">
            <summary>
            DatabaseObjectChange
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.DatabasePrincipalChange">
            <summary>
            DatabasePrincipalChange
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.SchemaObjectChange">
            <summary>
            SchemaObjectChange
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.DatabasePrincipalImpersonation">
            <summary>
            DatabasePrincipalImpersonation
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.DatabaseObjectOwnershipChange">
            <summary>
            DatabaseObjectOwnershipChange
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.DatabaseOwnershipChange">
            <summary>
            DatabaseOwnershipChange
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.SchemaObjectOwnershipChange">
            <summary>
            SchemaObjectOwnershipChange
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.DatabaseObjectPermissionChange">
            <summary>
            DatabaseObjectPermissionChange
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.DatabaseOperation">
            <summary>
            DatabaseOperation
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.DatabaseObjectAccess">
            <summary>
            DatabaseObjectAccess
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.SuccessfulDatabaseAuthenticationGroup">
            <summary>
            SuccessfulDatabaseAuthenticationGroup
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.FailedDatabaseAuthenticationGroup">
            <summary>
            FailedDatabaseAuthenticationGroup
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.DatabaseLogoutGroup">
            <summary>
            DatabaseLogoutGroup
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.UserChangePasswordGroup">
            <summary>
            UserChangePasswordGroup
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.UserDefinedAuditGroup">
            <summary>
            UserDefinedAuditGroup
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.TransactionBegin">
            <summary>
            TransactionBegin
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.TransactionCommit">
            <summary>
            TransactionCommit
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.TransactionRollback">
            <summary>
            TransactionRollback
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.StatementRollback">
            <summary>
            StatementRollback
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditActionGroupType.TransactionGroup">
            <summary>
            TransactionGroup
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.AuditTarget">
            <summary>
            SQL Server audit targets
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditTarget.File">
            <summary>
            File
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditTarget.ApplicationLog">
            <summary>
            ApplicationLog
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuditTarget.SecurityLog">
            <summary>
            SecurityLog
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ChangeTrackingOption">
            <summary>
            Change tracking options
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ChangeTrackingOption.Unknown">
            <summary>
            Unknown
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ChangeTrackingOption.Auto">
            <summary>
            Auto
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ChangeTrackingOption.Manual">
            <summary>
            Manual
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ChangeTrackingOption.Off">
            <summary>
            Off
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.SymmetricKeyCreationDisposition">
            <summary>
            Asymmetric key creation disposition
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SymmetricKeyCreationDisposition.Unknown">
            <summary>
            Unknown
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SymmetricKeyCreationDisposition.CreateNew">
            <summary>
            CreateNew
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SymmetricKeyCreationDisposition.OpenExisting">
            <summary>
            OpenExisting
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.DatabaseAuditAction">
            <summary>
            Database-level auditable action
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.DatabaseAuditAction.Select">
            <summary>
            Select
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.DatabaseAuditAction.Update">
            <summary>
            Update
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.DatabaseAuditAction.Insert">
            <summary>
            Insert
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.DatabaseAuditAction.Delete">
            <summary>
            Delete
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.DatabaseAuditAction.Execute">
            <summary>
            Execute
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.DatabaseAuditAction.Receive">
            <summary>
            Receive
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.DatabaseAuditAction.References">
            <summary>
            References
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.RecoveryMode">
            <summary>
            Database recovery mode
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.RecoveryMode.Unknown">
            <summary>
            Unknown
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.RecoveryMode.Simple">
            <summary>
            Simple
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.RecoveryMode.BulkLogged">
            <summary>
            BulkLogged
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.RecoveryMode.Full">
            <summary>
            Full
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.DelayedDurabilityMode">
            <summary>
            Database Delayed Durability mode
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.DelayedDurabilityMode.Disabled">
            <summary>
            Disabled
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.DelayedDurabilityMode.Allowed">
            <summary>
            Allowed
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.DelayedDurabilityMode.Forced">
            <summary>
            Forced
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.UserAccessOption">
            <summary>
            User access mode for the database
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.UserAccessOption.Multiple">
            <summary>
            Multiple
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.UserAccessOption.Restricted">
            <summary>
            Restricted
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.UserAccessOption.Single">
            <summary>
            Single
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.CompressionLevel">
            <summary>
            Compression level for data
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.CompressionLevel.None">
            <summary>
            None
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.CompressionLevel.Row">
            <summary>
            Row
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.CompressionLevel.Page">
            <summary>
            Page
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.CompressionLevel.ColumnStore">
            <summary>
            ColumnStore
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.CompressionLevel.ColumnStoreArchive">
            <summary>
            ColumnStoreArchive
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.Degree">
            <summary>
            Grid density level in spatial index
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.Degree.None">
            <summary>
            None
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.Degree.Low">
            <summary>
            Low
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.Degree.Medium">
            <summary>
            Medium
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.Degree.High">
            <summary>
            High
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.State">
            <summary>
            State of the endpoint
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.State.Unknown">
            <summary>
            Unknown
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.State.Disabled">
            <summary>
            Disabled
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.State.Started">
            <summary>
            Started
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.State.Stopped">
            <summary>
            Stopped
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.EventGroupType">
            <summary>
            Sql event groups
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.Unknown">
            <summary>
            Unknown
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlApplicationRoleEvents">
            <summary>
            DdlApplicationRoleEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlAssemblyEvents">
            <summary>
            DdlAssemblyEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlAuthorizationDatabaseEvents">
            <summary>
            DdlAuthorizationDatabaseEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlAvailabilityGroupEvents">
            <summary>
            DdlAvailabilityGroupEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlCertificateEvents">
            <summary>
            DdlCertificateEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlContractEvents">
            <summary>
            DdlContractEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlDatabaseAuditEvents">
            <summary>
            DdlDatabaseAuditEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlDatabaseLevelEvents">
            <summary>
            DdlDatabaseLevelEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlDatabaseSecurityEvents">
            <summary>
            DdlDatabaseSecurityEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlEventNotificationEvents">
            <summary>
            DdlEventNotificationEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlFunctionEvents">
            <summary>
            DdlFunctionEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlGdrDatabaseEvents">
            <summary>
            DdlGdrDatabaseEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlIndexEvents">
            <summary>
            DdlIndexEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlMessageTypeEvents">
            <summary>
            DdlMessageTypeEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlPartitionEvents">
            <summary>
            DdlPartitionEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlPartitionFunctionEvents">
            <summary>
            DdlPartitionFunctionEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlPartitionSchemeEvents">
            <summary>
            DdlPartitionSchemeEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlProcedureEvents">
            <summary>
            DdlProcedureEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlQueueEvents">
            <summary>
            DdlQueueEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlRemoteServiceBindingEvents">
            <summary>
            DdlRemoteServiceBindingEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlRoleEvents">
            <summary>
            DdlRoleEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlRouteEvents">
            <summary>
            DdlRouteEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlSchemaEvents">
            <summary>
            DdlSchemaEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlSecurityPolicyEvents">
            <summary>
            DdlSecurityPolicyEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlColumnMasterKeyEvents">
            <summary>
            DdlColumnMasterKeyEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlColumnEncryptionKeyEvents">
            <summary>
            DdlColumnEncryptionKeyEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlExternalResourcePoolEvents">
            <summary>
            DdlExternalResourcePoolEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlExternalLibraryEvents">
            <summary>
            DdlExternalLibraryEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlServiceEvents">
            <summary>
            DdlServiceEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlSsbEvents">
            <summary>
            DdlSsbEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlStatisticsEvents">
            <summary>
            DdlStatisticsEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlSynonymEvents">
            <summary>
            DdlSynonymEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlTableEvents">
            <summary>
            DdlTableEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlTableViewEvents">
            <summary>
            DdlTableViewEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlTriggerEvents">
            <summary>
            DdlTriggerEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlTypeEvents">
            <summary>
            DdlTypeEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlUserEvents">
            <summary>
            DdlUserEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlViewEvents">
            <summary>
            DdlViewEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlXmlSchemaCollectionEvents">
            <summary>
            DdlXmlSchemaCollectionEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlAuthorizationServerEvents">
            <summary>
            DdlAuthorizationServerEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlEndpointEvents">
            <summary>
            DdlEndpointEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlEvents">
            <summary>
            DdlEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlGdrServerEvents">
            <summary>
            DdlGdrServerEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlLoginEvents">
            <summary>
            DdlLoginEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlServerLevelEvents">
            <summary>
            DdlServerLevelEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlServerSecurityEvents">
            <summary>
            DdlServerSecurityEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlAsymmetricKeyEvents">
            <summary>
            DdlAsymmetricKeyEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlBrokerPriorityEvents">
            <summary>
            DdlBrokerPriorityEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlCryptoSignatureEvents">
            <summary>
            DdlCryptoSignatureEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlDatabaseAuditSpecificationEvents">
            <summary>
            DdlDatabaseAuditSpecificationEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlDatabaseEncryptionKeyEvents">
            <summary>
            DdlDatabaseEncryptionKeyEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlDefaultEvents">
            <summary>
            DdlDefaultEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlExtendedPropertyEvents">
            <summary>
            DdlExtendedPropertyEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlFullTextCatalogEvents">
            <summary>
            DdlFullTextCatalogEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlFullTextStopListEvents">
            <summary>
            DdlFullTextStopListEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlMasterKeyEvents">
            <summary>
            DdlMasterKeyEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlPlanGuideEvents">
            <summary>
            DdlPlanGuideEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlRuleEvents">
            <summary>
            DdlRuleEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlSearchPropertyListEvents">
            <summary>
            DdlSearchPropertyListEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlSequenceEvents">
            <summary>
            DdlSequenceEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlSymmetricKeyEvents">
            <summary>
            DdlSymmetricKeyEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlCredentialEvents">
            <summary>
            DdlCredentialEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlDatabaseEvents">
            <summary>
            DdlDatabaseEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlCryptographicProviderEvents">
            <summary>
            DdlCryptographicProviderEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlEventSessionEvents">
            <summary>
            DdlEventSessionEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlExtendedProcedureEvents">
            <summary>
            DdlExtendedProcedureEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlLinkedServerEvents">
            <summary>
            DdlLinkedServerEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlLinkedServerLoginEvents">
            <summary>
            DdlLinkedServerLoginEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlMessageEvents">
            <summary>
            DdlMessageEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlRemoteServerEvents">
            <summary>
            DdlRemoteServerEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlResourceGovernorEvents">
            <summary>
            DdlResourceGovernorEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlResourcePool">
            <summary>
            DdlResourcePool
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlServerAuditEvents">
            <summary>
            DdlServerAuditEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlServerAuditSpecificationEvents">
            <summary>
            DdlServerAuditSpecificationEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlServiceMasterKeyEvents">
            <summary>
            DdlServiceMasterKeyEvents
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.DdlWorkloadGroup">
            <summary>
            DdlWorkloadGroup
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.TrcClr">
            <summary>
            TrcClr
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.TrcDatabase">
            <summary>
            TrcDatabase
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.TrcDeprecation">
            <summary>
            TrcDeprecation
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.TrcErrorsAndWarnings">
            <summary>
            TrcErrorsAndWarnings
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.TrcFullText">
            <summary>
            TrcFullText
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.TrcLocks">
            <summary>
            TrcLocks
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.TrcObjects">
            <summary>
            TrcObjects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.TrcOledb">
            <summary>
            TrcOledb
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.TrcPerformance">
            <summary>
            TrcPerformance
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.TrcQueryNotifications">
            <summary>
            TrcQueryNotifications
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.TrcSecurityAudit">
            <summary>
            TrcSecurityAudit
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.TrcServer">
            <summary>
            TrcServer
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.TrcStoredProcedures">
            <summary>
            TrcStoredProcedures
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.TrcTSql">
            <summary>
            TrcTSql
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.TrcUserConfigurable">
            <summary>
            TrcUserConfigurable
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventGroupType.TrcAllEvents">
            <summary>
            TrcAllEvents
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.EventType">
            <summary>
            Sql Server event types
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.Unknown">
            <summary>
            Unknown
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AddRoleMember">
            <summary>
            AddRoleMember
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterApplicationRole">
            <summary>
            AlterApplicationRole
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterAssembly">
            <summary>
            AlterAssembly
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterAuthorizationDatabase">
            <summary>
            AlterAuthorizationDatabase
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterAvailabilityGroup">
            <summary>
            AlterAvailabilityGroup
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterCertificate">
            <summary>
            AlterCertificate
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterColumnEncryptionKey">
            <summary>
            AlterColumnEncryptionKey
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterDatabaseAudit">
            <summary>
            AlterDatabaseAudit
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterFunction">
            <summary>
            AlterFunction
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterIndex">
            <summary>
            AlterIndex
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterMessageType">
            <summary>
            AlterMessageType
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterPartitionFunction">
            <summary>
            AlterPartitionFunction
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterPartitionScheme">
            <summary>
            AlterPartitionScheme
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterProcedure">
            <summary>
            AlterProcedure
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterQueue">
            <summary>
            AlterQueue
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterRemoteServiceBinding">
            <summary>
            AlterRemoteServiceBinding
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterRole">
            <summary>
            AlterRole
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterRoute">
            <summary>
            AlterRoute
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterSchema">
            <summary>
            AlterSchema
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterSecurityPolicy">
            <summary>
            AlterSecurityPolicy
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterService">
            <summary>
            AlterService
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterTable">
            <summary>
            AlterTable
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterTrigger">
            <summary>
            AlterTrigger
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterUser">
            <summary>
            AlterUser
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterView">
            <summary>
            AlterView
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterXmlSchemaCollection">
            <summary>
            AlterXmlSchemaCollection
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateApplicationRole">
            <summary>
            CreateApplicationRole
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateAssembly">
            <summary>
            CreateAssembly
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateAvailabilityGroup">
            <summary>
            CreateAvailabilityGroup
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateCertificate">
            <summary>
            CreateCertificate
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateContract">
            <summary>
            CreateContract
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateColumnEncryptionKey">
            <summary>
            CreateColumnEncryptionKey
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateColumnMasterKey">
            <summary>
            CreateColumnMasterKey
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateDatabaseAudit">
            <summary>
            CreateDatabaseAudit
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateEventNotification">
            <summary>
            CreateEventNotification
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateFunction">
            <summary>
            CreateFunction
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateIndex">
            <summary>
            CreateIndex
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateMessageType">
            <summary>
            CreateMessageType
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreatePartitionFunction">
            <summary>
            CreatePartitionFunction
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreatePartitionScheme">
            <summary>
            CreatePartitionScheme
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateProcedure">
            <summary>
            CreateProcedure
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateQueue">
            <summary>
            CreateQueue
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateRemoteServiceBinding">
            <summary>
            CreateRemoteServiceBinding
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateRole">
            <summary>
            CreateRole
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateRoute">
            <summary>
            CreateRoute
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateSchema">
            <summary>
            CreateSchema
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateSecurityPolicy">
            <summary>
            CreateSecurityPolicy
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateService">
            <summary>
            CreateService
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateStatistics">
            <summary>
            CreateStatistics
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateSynonym">
            <summary>
            CreateSynonym
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateTable">
            <summary>
            CreateTable
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateTrigger">
            <summary>
            CreateTrigger
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateType">
            <summary>
            CreateType
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateUser">
            <summary>
            CreateUser
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateView">
            <summary>
            CreateView
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateXmlIndex">
            <summary>
            CreateXmlIndex
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateXmlSchemaCollection">
            <summary>
            CreateXmlSchemaCollection
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DenyDatabase">
            <summary>
            DenyDatabase
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropApplicationRole">
            <summary>
            DropApplicationRole
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropAvailabilityGroup">
            <summary>
            DropAvailabilityGroup
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropAssembly">
            <summary>
            DropAssembly
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropCertificate">
            <summary>
            DropCertificate
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropColumnEncryptionKey">
            <summary>
            DropColumnEncryptionKey
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterDatabaseScopedConfiguration">
            <summary>
            AlterDatabaseScopedConfiguration
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateExternalResourcePool">
            <summary>
            CreateExternalResourcePool
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterExternalResourcePool">
            <summary>
            AlterExternalResourcePool
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropExternalResourcePool">
            <summary>
            DropExternalResourcePool
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateExternalLibrary">
            <summary>
            CreateExternalLibrary
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterExternalLibrary">
            <summary>
            AlterExternalLibrary
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropExternalLibrary">
            <summary>
            DropExternalLibrary
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropColumnMasterKey">
            <summary>
            DropColumnMasterKey
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropContract">
            <summary>
            DropContract
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropDatabaseAudit">
            <summary>
            DropDatabaseAudit
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropEventNotification">
            <summary>
            DropEventNotification
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropFunction">
            <summary>
            DropFunction
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropIndex">
            <summary>
            DropIndex
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropMessageType">
            <summary>
            DropMessageType
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropPartitionFunction">
            <summary>
            DropPartitionFunction
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropPartitionScheme">
            <summary>
            DropPartitionScheme
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropProcedure">
            <summary>
            DropProcedure
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropQueue">
            <summary>
            DropQueue
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropRemoteServiceBinding">
            <summary>
            DropRemoteServiceBinding
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropRole">
            <summary>
            DropRole
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropRoleMember">
            <summary>
            DropRoleMember
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropRoute">
            <summary>
            DropRoute
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropSchema">
            <summary>
            DropSchema
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropSecurityPolicy">
            <summary>
            DropSecurityPolicy
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropService">
            <summary>
            DropService
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropStatistics">
            <summary>
            DropStatistics
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropSynonym">
            <summary>
            DropSynonym
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropTable">
            <summary>
            DropTable
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropTrigger">
            <summary>
            DropTrigger
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropType">
            <summary>
            DropType
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropUser">
            <summary>
            DropUser
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropView">
            <summary>
            DropView
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropXmlSchemaCollection">
            <summary>
            DropXmlSchemaCollection
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.GrantDatabase">
            <summary>
            GrantDatabase
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.RevokeDatabase">
            <summary>
            RevokeDatabase
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.UpdateStatistics">
            <summary>
            UpdateStatistics
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AddServerRoleMember">
            <summary>
            AddServerRoleMember
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterAuthorizationServer">
            <summary>
            AlterAuthorizationServer
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterDatabase">
            <summary>
            AlterDatabase
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterEndpoint">
            <summary>
            AlterEndpoint
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterLogin">
            <summary>
            AlterLogin
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateDatabase">
            <summary>
            CreateDatabase
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateEndpoint">
            <summary>
            CreateEndpoint
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateLogin">
            <summary>
            CreateLogin
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DenyServer">
            <summary>
            DenyServer
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropDatabase">
            <summary>
            DropDatabase
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropEndpoint">
            <summary>
            DropEndpoint
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropLogin">
            <summary>
            DropLogin
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropServerRoleMember">
            <summary>
            DropServerRoleMember
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.GrantServer">
            <summary>
            GrantServer
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.RevokeServer">
            <summary>
            RevokeServer
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AddSignature">
            <summary>
            AddSignature
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AddSignatureSchemaObject">
            <summary>
            AddSignatureSchemaObject
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterAsymmetricKey">
            <summary>
            AlterAsymmetricKey
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterBrokerPriority">
            <summary>
            AlterBrokerPriority
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterDatabaseAuditSpecification">
            <summary>
            AlterDatabaseAuditSpecification
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterDatabaseEncryptionKey">
            <summary>
            AlterDatabaseEncryptionKey
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterExtendedProperty">
            <summary>
            AlterExtendedProperty
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterFullTextCatalog">
            <summary>
            AlterFullTextCatalog
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterFullTextIndex">
            <summary>
            AlterFullTextIndex
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterFullTextStopList">
            <summary>
            AlterFullTextStopList
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterMasterKey">
            <summary>
            AlterMasterKey
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterPlanGuide">
            <summary>
            AlterPlanGuide
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterSymmetricKey">
            <summary>
            AlterSymmetricKey
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.BindDefault">
            <summary>
            BindDefault
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.BindRule">
            <summary>
            BindRule
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateAsymmetricKey">
            <summary>
            CreateAsymmetricKey
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateBrokerPriority">
            <summary>
            CreateBrokerPriority
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateDatabaseAuditSpecification">
            <summary>
            CreateDatabaseAuditSpecification
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateDatabaseEncryptionKey">
            <summary>
            CreateDatabaseEncryptionKey
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateDefault">
            <summary>
            CreateDefault
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateExtendedProperty">
            <summary>
            CreateExtendedProperty
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateFullTextCatalog">
            <summary>
            CreateFullTextCatalog
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateFullTextIndex">
            <summary>
            CreateFullTextIndex
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateFullTextStopList">
            <summary>
            CreateFullTextStopList
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateMasterKey">
            <summary>
            CreateMasterKey
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreatePlanGuide">
            <summary>
            CreatePlanGuide
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateRule">
            <summary>
            CreateRule
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateSpatialIndex">
            <summary>
            CreateSpatialIndex
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateSymmetricKey">
            <summary>
            CreateSymmetricKey
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropAsymmetricKey">
            <summary>
            DropAsymmetricKey
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropBrokerPriority">
            <summary>
            DropBrokerPriority
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropDatabaseAuditSpecification">
            <summary>
            DropDatabaseAuditSpecification
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropDatabaseEncryptionKey">
            <summary>
            DropDatabaseEncryptionKey
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropDefault">
            <summary>
            DropDefault
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropExtendedProperty">
            <summary>
            DropExtendedProperty
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropFullTextCatalog">
            <summary>
            DropFullTextCatalog
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropFullTextIndex">
            <summary>
            DropFullTextIndex
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropFullTextStopList">
            <summary>
            DropFullTextStopList
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropMasterKey">
            <summary>
            DropMasterKey
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropPlanGuide">
            <summary>
            DropPlanGuide
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropRule">
            <summary>
            DropRule
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropSignature">
            <summary>
            DropSignature
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropSignatureSchemaObject">
            <summary>
            DropSignatureSchemaObject
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropSymmetricKey">
            <summary>
            DropSymmetricKey
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.Rename">
            <summary>
            Rename
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.UnbindDefault">
            <summary>
            UnbindDefault
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.UnbindRule">
            <summary>
            UnbindRule
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterCredential">
            <summary>
            AlterCredential
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterCryptographicProvider">
            <summary>
            AlterCryptographicProvider
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterEventSession">
            <summary>
            AlterEventSession
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterInstance">
            <summary>
            AlterInstance
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterLinkedServer">
            <summary>
            AlterLinkedServer
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterMessage">
            <summary>
            AlterMessage
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterRemoteServer">
            <summary>
            AlterRemoteServer
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterResourceGovernorConfig">
            <summary>
            AlterResourceGovernorConfig
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterResourcePool">
            <summary>
            AlterResourcePool
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterServerAudit">
            <summary>
            AlterServerAudit
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterServerAuditSpecification">
            <summary>
            AlterServerAuditSpecification
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterServiceMasterKey">
            <summary>
            AlterServiceMasterKey
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterWorkloadGroup">
            <summary>
            AlterWorkloadGroup
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateCredential">
            <summary>
            CreateCredential
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateCryptographicProvider">
            <summary>
            CreateCryptographicProvider
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateEventSession">
            <summary>
            CreateEventSession
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateExtendedProcedure">
            <summary>
            CreateExtendedProcedure
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateLinkedServer">
            <summary>
            CreateLinkedServer
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateLinkedServerLogin">
            <summary>
            CreateLinkedServerLogin
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateMessage">
            <summary>
            CreateMessage
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateRemoteServer">
            <summary>
            CreateRemoteServer
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateResourcePool">
            <summary>
            CreateResourcePool
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateServerAudit">
            <summary>
            CreateServerAudit
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateServerAuditSpecification">
            <summary>
            CreateServerAuditSpecification
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateWorkloadGroup">
            <summary>
            CreateWorkloadGroup
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropCredential">
            <summary>
            DropCredential
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropCryptographicProvider">
            <summary>
            DropCryptographicProvider
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropEventSession">
            <summary>
            DropEventSession
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropExtendedProcedure">
            <summary>
            DropExtendedProcedure
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropLinkedServer">
            <summary>
            DropLinkedServer
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropLinkedServerLogin">
            <summary>
            DropLinkedServerLogin
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropMessage">
            <summary>
            DropMessage
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropRemoteServer">
            <summary>
            DropRemoteServer
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropResourcePool">
            <summary>
            DropResourcePool
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropServerAudit">
            <summary>
            DropServerAudit
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropServerAuditSpecification">
            <summary>
            DropServerAuditSpecification
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropWorkloadGroup">
            <summary>
            DropWorkloadGroup
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AssemblyLoad">
            <summary>
            AssemblyLoad
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AuditAddDbUserEvent">
            <summary>
            AuditAddDbUserEvent
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AuditAddLoginEvent">
            <summary>
            AuditAddLoginEvent
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AuditAddLoginToServerRoleEvent">
            <summary>
            AuditAddLoginToServerRoleEvent
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AuditAddMemberToDbRoleEvent">
            <summary>
            AuditAddMemberToDbRoleEvent
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AuditAddRoleEvent">
            <summary>
            AuditAddRoleEvent
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AuditAppRoleChangePasswordEvent">
            <summary>
            AuditAppRoleChangePasswordEvent
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AuditBackupRestoreEvent">
            <summary>
            AuditBackupRestoreEvent
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AuditChangeAuditEvent">
            <summary>
            AuditChangeAuditEvent
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AuditChangeDatabaseOwner">
            <summary>
            AuditChangeDatabaseOwner
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AuditDatabaseManagementEvent">
            <summary>
            AuditDatabaseManagementEvent
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AuditDatabaseObjectAccessEvent">
            <summary>
            AuditDatabaseObjectAccessEvent
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AuditDatabaseObjectGdrEvent">
            <summary>
            AuditDatabaseObjectGdrEvent
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AuditDatabaseObjectManagementEvent">
            <summary>
            AuditDatabaseObjectManagementEvent
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AuditDatabaseObjectTakeOwnershipEvent">
            <summary>
            AuditDatabaseObjectTakeOwnershipEvent
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AuditDatabaseOperationEvent">
            <summary>
            AuditDatabaseOperationEvent
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AuditDatabasePrincipalImpersonationEvent">
            <summary>
            AuditDatabasePrincipalImpersonationEvent
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AuditDatabasePrincipalManagementEvent">
            <summary>
            AuditDatabasePrincipalManagementEvent
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AuditDatabaseScopeGdrEvent">
            <summary>
            AuditDatabaseScopeGdrEvent
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AuditDbccEvent">
            <summary>
            AuditDbccEvent
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AuditLogin">
            <summary>
            AuditLogin
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AuditLoginChangePasswordEvent">
            <summary>
            AuditLoginChangePasswordEvent
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AuditLoginChangePropertyEvent">
            <summary>
            AuditLoginChangePropertyEvent
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AuditLoginFailed">
            <summary>
            AuditLoginFailed
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AuditLoginGdrEvent">
            <summary>
            AuditLoginGdrEvent
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AuditLogout">
            <summary>
            AuditLogout
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AuditSchemaObjectAccessEvent">
            <summary>
            AuditSchemaObjectAccessEvent
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AuditSchemaObjectGdrEvent">
            <summary>
            AuditSchemaObjectGdrEvent
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AuditSchemaObjectManagementEvent">
            <summary>
            AuditSchemaObjectManagementEvent
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AuditSchemaObjectTakeOwnershipEvent">
            <summary>
            AuditSchemaObjectTakeOwnershipEvent
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AuditServerAlterTraceEvent">
            <summary>
            AuditServerAlterTraceEvent
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AuditServerObjectGdrEvent">
            <summary>
            AuditServerObjectGdrEvent
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AuditServerObjectManagementEvent">
            <summary>
            AuditServerObjectManagementEvent
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AuditServerObjectTakeOwnershipEvent">
            <summary>
            AuditServerObjectTakeOwnershipEvent
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AuditServerOperationEvent">
            <summary>
            AuditServerOperationEvent
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AuditServerPrincipalImpersonationEvent">
            <summary>
            AuditServerPrincipalImpersonationEvent
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AuditServerPrincipalManagementEvent">
            <summary>
            AuditServerPrincipalManagementEvent
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AuditServerScopeGdrEvent">
            <summary>
            AuditServerScopeGdrEvent
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.BlockedProcessReport">
            <summary>
            BlockedProcessReport
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.BrokerQueueDisabled">
            <summary>
            BrokerQueueDisabled
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DataFileAutoGrow">
            <summary>
            DataFileAutoGrow
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DataFileAutoShrink">
            <summary>
            DataFileAutoShrink
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DatabaseMirroringStateChange">
            <summary>
            DatabaseMirroringStateChange
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DeadlockGraph">
            <summary>
            DeadlockGraph
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DeprecationAnnouncement">
            <summary>
            DeprecationAnnouncement
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DeprecationFinalSupport">
            <summary>
            DeprecationFinalSupport
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.ErrorLog">
            <summary>
            ErrorLog
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.EventLog">
            <summary>
            EventLog
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.Exception">
            <summary>
            Exception
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.ExchangeSpillEvent">
            <summary>
            ExchangeSpillEvent
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.ExecutionWarnings">
            <summary>
            ExecutionWarnings
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.FtCrawlAborted">
            <summary>
            FtCrawlAborted
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.FtCrawlStarted">
            <summary>
            FtCrawlStarted
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.FtCrawlStopped">
            <summary>
            FtCrawlStopped
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.HashWarning">
            <summary>
            HashWarning
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.LockDeadlock">
            <summary>
            LockDeadlock
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.LockDeadlockChain">
            <summary>
            LockDeadlockChain
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.LockEscalation">
            <summary>
            LockEscalation
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.LogFileAutoGrow">
            <summary>
            LogFileAutoGrow
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.LogFileAutoShrink">
            <summary>
            LogFileAutoShrink
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.MissingColumnStatistics">
            <summary>
            MissingColumnStatistics
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.MissingJoinPredicate">
            <summary>
            MissingJoinPredicate
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.MountTape">
            <summary>
            MountTape
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.ObjectAltered">
            <summary>
            ObjectAltered
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.ObjectCreated">
            <summary>
            ObjectCreated
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.ObjectDeleted">
            <summary>
            ObjectDeleted
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.OledbCallEvent">
            <summary>
            OledbCallEvent
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.OledbDataReadEvent">
            <summary>
            OledbDataReadEvent
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.OledbErrors">
            <summary>
            OledbErrors
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.OledbProviderInformation">
            <summary>
            OledbProviderInformation
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.OledbQueryInterfaceEvent">
            <summary>
            OledbQueryInterfaceEvent
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.QnDynamics">
            <summary>
            QnDynamics
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.QnParameterTable">
            <summary>
            QnParameterTable
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.QnSubscription">
            <summary>
            QnSubscription
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.QnTemplate">
            <summary>
            QnTemplate
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.QueueActivation">
            <summary>
            QueueActivation
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.ServerMemoryChange">
            <summary>
            ServerMemoryChange
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.ShowPlanAllForQueryCompile">
            <summary>
            ShowPlanAllForQueryCompile
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.ShowPlanXmlForQueryCompile">
            <summary>
            ShowPlanXmlForQueryCompile
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.ShowPlanXml">
            <summary>
            ShowPlanXml
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.ShowPlanXmlStatisticsProfile">
            <summary>
            ShowPlanXmlStatisticsProfile
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.SortWarnings">
            <summary>
            SortWarnings
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.SpCacheInsert">
            <summary>
            SpCacheInsert
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.SpCacheMiss">
            <summary>
            SpCacheMiss
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.SpCacheRemove">
            <summary>
            SpCacheRemove
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.SpRecompile">
            <summary>
            SpRecompile
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.SqlStmtRecompile">
            <summary>
            SqlStmtRecompile
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.TraceFileClose">
            <summary>
            TraceFileClose
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.UserErrorMessage">
            <summary>
            UserErrorMessage
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.UserConfigurable0">
            <summary>
            UserConfigurable0
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.UserConfigurable1">
            <summary>
            UserConfigurable1
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.UserConfigurable2">
            <summary>
            UserConfigurable2
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.UserConfigurable3">
            <summary>
            UserConfigurable3
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.UserConfigurable4">
            <summary>
            UserConfigurable4
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.UserConfigurable5">
            <summary>
            UserConfigurable5
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.UserConfigurable6">
            <summary>
            UserConfigurable6
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.UserConfigurable7">
            <summary>
            UserConfigurable7
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.UserConfigurable8">
            <summary>
            UserConfigurable8
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.UserConfigurable9">
            <summary>
            UserConfigurable9
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.XQueryStaticType">
            <summary>
            XQueryStaticType
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AuditFullText">
            <summary>
            AuditFullText
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.BitmapWarning">
            <summary>
            BitmapWarning
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CpuThresholdExceeded">
            <summary>
            CpuThresholdExceeded
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DatabaseSuspectDataPage">
            <summary>
            DatabaseSuspectDataPage
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateSequence">
            <summary>
            CreateSequence
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterSequence">
            <summary>
            AlterSequence
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropSequence">
            <summary>
            DropSequence
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateServerRole">
            <summary>
            CreateServerRole
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterServerRole">
            <summary>
            AlterServerRole
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropServerRole">
            <summary>
            DropServerRole
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterServerConfiguration">
            <summary>
            AlterServerConfiguration
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.CreateSearchPropertyList">
            <summary>
            CreateSearchPropertyList
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.AlterSearchPropertyList">
            <summary>
            AlterSearchPropertyList
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventType.DropSearchPropertyList">
            <summary>
            DropSearchPropertyList
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.DataSourceType">
            <summary>
            External data source type options
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.DataSourceType.Hadoop">
            <summary>
            Hadoop
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.DataSourceType.RDBMS">
            <summary>
            RDBMS
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.DataSourceType.ShardMapManager">
            <summary>
            ShardMapManager
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.DataSourceType.BlobStorage">
            <summary>
            BlobStorage
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.FileFormatType">
            <summary>
            External file format type options.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.FileFormatType.DelimitedText">
            <summary>
            DelimitedText
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.FileFormatType.RcFile">
            <summary>
            RcFile
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.FileFormatType.Orc">
            <summary>
            Orc
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.FileFormatType.Parquet">
            <summary>
            Parquet
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.RejectType">
            <summary>
            External table reject type options.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.RejectType.Value">
            <summary>
            Value
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.RejectType.Percentage">
            <summary>
            Percentage
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.MemoryPartitionMode">
            <summary>
            Memory partion mode for event session
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.MemoryPartitionMode.None">
            <summary>
            None
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.MemoryPartitionMode.PerNode">
            <summary>
            PerNode
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.MemoryPartitionMode.PerCpu">
            <summary>
            PerCpu
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.EventRetentionMode">
            <summary>
            Event retention mode for event session
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventRetentionMode.AllowSingleEventLoss">
            <summary>
            AllowSingleEventLoss
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventRetentionMode.AllowMultipleEventLoss">
            <summary>
            AllowMultipleEventLoss
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventRetentionMode.NoEventLoss">
            <summary>
            NoEventLoss
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ForeignKeyAction">
            <summary>
            Actions taken when a key to which existing foreign key points is updated or deleted
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ForeignKeyAction.NoAction">
            <summary>
            NoAction
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ForeignKeyAction.Cascade">
            <summary>
            Cascade
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ForeignKeyAction.SetNull">
            <summary>
            SetNull
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ForeignKeyAction.SetDefault">
            <summary>
            SetDefault
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.Tessellation">
            <summary>
            Grid tessellation in spatial index
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.Tessellation.None">
            <summary>
            None
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.Tessellation.Geometry">
            <summary>
            Geometry
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.Tessellation.Geography">
            <summary>
            Geography
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.Tessellation.AutoGeometry">
            <summary>
            AutoGeometry
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.Tessellation.AutoGeography">
            <summary>
            AutoGeography
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.LoginEncryptionOption">
            <summary>
            SQL login encryption options
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.LoginEncryptionOption.Encrypt">
            <summary>
            Encrypt
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.LoginEncryptionOption.AlreadyEncrypted">
            <summary>
            AlreadyEncrypted
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.LoginEncryptionOption.AlreadyEncryptedOld">
            <summary>
            AlreadyEncryptedOld
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.MemoryUnit">
            <summary>
            Memory units for use in SQL models
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.MemoryUnit.Unspecified">
            <summary>
            Unspecified
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.MemoryUnit.Percent">
            <summary>
            Percent
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.MemoryUnit.Bytes">
            <summary>
            Bytes
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.MemoryUnit.KB">
            <summary>
            KB
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.MemoryUnit.MB">
            <summary>
            MB
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.MemoryUnit.GB">
            <summary>
            GB
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.MemoryUnit.TB">
            <summary>
            TB
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.MemoryUnit.PB">
            <summary>
            PB
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.MemoryUnit.EB">
            <summary>
            EB
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.MessageSentBy">
            <summary>
            Specifies message sender type
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.MessageSentBy.Unknown">
            <summary>
            Unknown
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.MessageSentBy.Initiator">
            <summary>
            Initiator
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.MessageSentBy.Target">
            <summary>
            Target
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.MessageSentBy.Any">
            <summary>
            Any
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ValidationMethod">
            <summary>
            Specifies message validation method
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ValidationMethod.Unknown">
            <summary>
            Unknown
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ValidationMethod.None">
            <summary>
            None
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ValidationMethod.Empty">
            <summary>
            Empty
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ValidationMethod.WellFormedXml">
            <summary>
            WellFormedXml
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ValidationMethod.ValidXml">
            <summary>
            ValidXml
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.PartitionRange">
            <summary>
            Specifies to which side of interval, left or right, the boundary value belongs
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PartitionRange.Unknown">
            <summary>
            Unknown
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PartitionRange.Left">
            <summary>
            Left
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PartitionRange.Right">
            <summary>
            Right
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.Payload">
            <summary>
            Payload types for endpoints
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.Payload.Unknown">
            <summary>
            Unknown
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.Payload.Soap">
            <summary>
            Soap
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.Payload.TSql">
            <summary>
            TSql
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.Payload.ServiceBroker">
            <summary>
            ServiceBroker
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.Payload.DatabaseMirroring">
            <summary>
            DatabaseMirroring
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.PermissionAction">
            <summary>
            SQL permission action types
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionAction.Grant">
            <summary>
            Grant
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.PermissionAction.Deny">
            <summary>
            Deny
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.SecondaryXmlIndexType">
            <summary>
            Types of secondary XML index
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SecondaryXmlIndexType.Unknown">
            <summary>
            Unknown
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SecondaryXmlIndexType.Path">
            <summary>
            Path
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SecondaryXmlIndexType.Property">
            <summary>
            Property
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SecondaryXmlIndexType.Value">
            <summary>
            Value
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.Protocol">
            <summary>
            Protocol types for endpoints
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.Protocol.Unknown">
            <summary>
            Unknown
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.Protocol.Http">
            <summary>
            Http
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.Protocol.Tcp">
            <summary>
            Tcp
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.TimeUnit">
            <summary>
            Describes the unit for retention period.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.TimeUnit.Unknown">
            <summary>
            Unknown
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.TimeUnit.Seconds">
            <summary>
            Seconds
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.TimeUnit.Days">
            <summary>
            Days
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.TimeUnit.Hours">
            <summary>
            Hours
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.TimeUnit.Minutes">
            <summary>
            Minutes
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.SamplingStyle">
            <summary>
            Sampling styles used to create statistics
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SamplingStyle.Automatic">
            <summary>
            Automatic
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SamplingStyle.Fullscan">
            <summary>
            Fullscan
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SamplingStyle.SamplePercentRows">
            <summary>
            SamplePercentRows
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SamplingStyle.SampleAbsoluteRows">
            <summary>
            SampleAbsoluteRows
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.OrderRestriction">
            <summary>
            Trigger oder restriction types
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.OrderRestriction.None">
            <summary>
            None
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.OrderRestriction.IsFirst">
            <summary>
            IsFirst
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.OrderRestriction.IsLast">
            <summary>
            IsLast
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.TriggerType">
            <summary>
            Trigger types
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.TriggerType.Unknown">
            <summary>
            Unknown
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.TriggerType.For">
            <summary>
            For
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.TriggerType.After">
            <summary>
            After
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.TriggerType.InsteadOf">
            <summary>
            InsteadOf
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.AuthenticationType">
            <summary>
            Database user Authentication type
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuthenticationType.None">
            <summary>
            User without a login, Application Role, Database Role,  Certificate mapped user or Asymmetric key mapped user
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuthenticationType.InstanceAuthentication">
            <summary>
            User with login 
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuthenticationType.DatabaseAuthentication">
            <summary>
            User with a password
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuthenticationType.WindowsAuthentication">
            <summary>
            Windows user with login, Windows user without a login or Windows group
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.AuthenticationType.ExternalAuthenticationProvider">
            <summary>
            User supplied by an external authentication provider (e.g. Azure Active Directory).
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.XmlStyle">
            <summary>
            XML data type style
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.XmlStyle.Unknown">
            <summary>
            Unknown
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.XmlStyle.Content">
            <summary>
            Content
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.XmlStyle.Document">
            <summary>
            Document
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.Containment">
            <summary>
            Database Containment types
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.Containment.None">
            <summary>
            None
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.Containment.Partial">
            <summary>
            Partial
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.FailureAction">
            <summary>
            Action type for audit failure
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.FailureAction.Continue">
            <summary>
            Continue
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.FailureAction.Shutdown">
            <summary>
            Shutdown
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.FailureAction.FailOperation">
            <summary>
            FailOperation
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.NonTransactedFileStreamAccess">
            <summary>
            FILESTREAM non-transactional access option values
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.NonTransactedFileStreamAccess.Off">
            <summary>
            Off
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.NonTransactedFileStreamAccess.ReadOnly">
            <summary>
            ReadOnly
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.NonTransactedFileStreamAccess.Full">
            <summary>
            Full
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.Durability">
            <summary>
            Durability of a table
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.Durability.SchemaAndData">
            <summary>
            Table is durable.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.Durability.SchemaOnly">
            <summary>
            Table is non-durable.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.EventSessionScope">
            <summary>
            Scope of the event session
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventSessionScope.Server">
            <summary>
            Server
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.EventSessionScope.Database">
            <summary>
            Database
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ColumnGeneratedAlwaysType">
            <summary>
            Column system-versioned generated always type
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ColumnGeneratedAlwaysType.None">
            <summary>
            Column is not a generated always type of column.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ColumnGeneratedAlwaysType.GeneratedAlwaysAsRowStart">
            <summary>
            Column has a type of 'generated always as row start'.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.ColumnGeneratedAlwaysType.GeneratedAlwaysAsRowEnd">
            <summary>
            Column has a type of 'generated always as row end'.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.UserType">
            <summary>
            User type (for use with Azure active directory users).
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.UserType.None">
            <summary>
            No specified Azure active directory user type.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.UserType.ExternalUser">
            <summary>
            An Azure active directory user.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.UserType.ExternalGroup">
            <summary>
            An Azure active directory group.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.SecurityPredicateOperation">
            <summary>
            The operation to which a security predicate applies
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SecurityPredicateOperation.All">
            <summary>
            All
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SecurityPredicateOperation.AfterInsert">
            <summary>
            AfterInsert
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SecurityPredicateOperation.AfterUpdate">
            <summary>
            AfterUpdate
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SecurityPredicateOperation.BeforeUpdate">
            <summary>
            BeforeUpdate
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SecurityPredicateOperation.BeforeDelete">
            <summary>
            BeforeDelete
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.SecurityPredicateType">
            <summary>
            The type of the security predicate
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SecurityPredicateType.Filter">
            <summary>
            Filter
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SecurityPredicateType.Block">
            <summary>
            Block
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.QueryStoreCaptureMode">
            <summary>
            Query Store SIZE_BASED_CLEANUP_MODE option values
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.QueryStoreCaptureMode.All">
            <summary>
            Query Store captures all queries. This is the default configuration value
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.QueryStoreCaptureMode.Auto">
            <summary>
            Query Store captures relevant queries based on execution count and resource consumption.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.QueryStoreCaptureMode.None">
            <summary>
            Query Store does not capture new queries.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.QueryStoreDesiredState">
            <summary>
            Query Store Operation Mode/Desired State option values
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.QueryStoreDesiredState.Off">
            <summary>
            Query Store feature is OFF.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.QueryStoreDesiredState.ReadOnly">
            <summary>
            Query Store does not record new data.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.QueryStoreDesiredState.ReadWrite">
            <summary>
            Query store records new data.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.Column">
            <summary>
            Model schema container class for Column
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Column.TypeClass">
            <summary>
            Type class for Column
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Column.ColumnType">
            <summary>
            ColumnType metadata class of Column
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Column.Collation">
            <summary>
            Collation property class of Column
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Column.IsIdentityNotForReplication">
            <summary>
            IsIdentityNotForReplication property class of Column
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Column.Nullable">
            <summary>
            Nullable property class of Column
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Column.IsRowGuidCol">
            <summary>
            IsRowGuidCol property class of Column
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Column.Sparse">
            <summary>
            Sparse property class of Column
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Column.Expression">
            <summary>
            Expression property class of Column
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Column.Persisted">
            <summary>
            Persisted property class of Column
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Column.PersistedNullable">
            <summary>
            PersistedNullable property class of Column
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Column.Scale">
            <summary>
            Scale property class of Column
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Column.Precision">
            <summary>
            Precision property class of Column
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Column.Length">
            <summary>
            Length property class of Column
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Column.IsMax">
            <summary>
            IsMax property class of Column
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Column.XmlStyle">
            <summary>
            XmlStyle property class of Column
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Column.EncryptionAlgorithmName">
            <summary>
            EncryptionAlgorithmName property class of Column
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Column.EncryptionType">
            <summary>
            EncryptionType property class of Column
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Column.GeneratedAlwaysType">
            <summary>
            GeneratedAlwaysType property class of Column
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Column.GraphType">
            <summary>
            GraphType property class of Column
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Column.IdentityIncrement">
            <summary>
            IdentityIncrement property class of Column
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Column.IdentitySeed">
            <summary>
            IdentitySeed property class of Column
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Column.IsFileStream">
            <summary>
            IsFileStream property class of Column
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Column.IsHidden">
            <summary>
            IsHidden property class of Column
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Column.IsIdentity">
            <summary>
            IsIdentity property class of Column
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Column.IsPseudoColumn">
            <summary>
            IsPseudoColumn property class of Column
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Column.MaskingFunction">
            <summary>
            MaskingFunction property class of Column
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Column.ExpressionDependencies">
            <summary>
            ExpressionDependencies relationship class of Column
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Column.XmlSchemaCollection">
            <summary>
            XmlSchemaCollection relationship class of Column
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Column.DataType">
            <summary>
            DataType relationship class of Column
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Column.ColumnEncryptionKey">
            <summary>
            ColumnEncryptionKey relationship class of Column
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.TableValuedFunction">
            <summary>
            Model schema container class for TableValuedFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableValuedFunction.TypeClass">
            <summary>
            Type class for TableValuedFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableValuedFunction.FunctionType">
            <summary>
            FunctionType metadata class of TableValuedFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableValuedFunction.ReturnsNullOnNullInput">
            <summary>
            ReturnsNullOnNullInput property class of TableValuedFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableValuedFunction.AnsiNullsOn">
            <summary>
            AnsiNullsOn property class of TableValuedFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableValuedFunction.CalledOnNullInput">
            <summary>
            CalledOnNullInput property class of TableValuedFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableValuedFunction.ExecuteAsCaller">
            <summary>
            ExecuteAsCaller property class of TableValuedFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableValuedFunction.WithEncryption">
            <summary>
            WithEncryption property class of TableValuedFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableValuedFunction.ExecuteAsOwner">
            <summary>
            ExecuteAsOwner property class of TableValuedFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableValuedFunction.QuotedIdentifierOn">
            <summary>
            QuotedIdentifierOn property class of TableValuedFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableValuedFunction.WithSchemaBinding">
            <summary>
            WithSchemaBinding property class of TableValuedFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableValuedFunction.ExecuteAsSelf">
            <summary>
            ExecuteAsSelf property class of TableValuedFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableValuedFunction.ReturnTableVariableName">
            <summary>
            ReturnTableVariableName property class of TableValuedFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableValuedFunction.ClassName">
            <summary>
            ClassName property class of TableValuedFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableValuedFunction.DataAccess">
            <summary>
            DataAccess property class of TableValuedFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableValuedFunction.FillRowMethodName">
            <summary>
            FillRowMethodName property class of TableValuedFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableValuedFunction.Deterministic">
            <summary>
            Deterministic property class of TableValuedFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableValuedFunction.Precise">
            <summary>
            Precise property class of TableValuedFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableValuedFunction.MethodName">
            <summary>
            MethodName property class of TableValuedFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableValuedFunction.SystemDataAccess">
            <summary>
            SystemDataAccess property class of TableValuedFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableValuedFunction.IsNativeCompiled">
            <summary>
            IsNativeCompiled property class of TableValuedFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableValuedFunction.IsReplicated">
            <summary>
            IsReplicated property class of TableValuedFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableValuedFunction.Assembly">
            <summary>
            Assembly relationship class of TableValuedFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableValuedFunction.TableOption">
            <summary>
            TableOption relationship class of TableValuedFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableValuedFunction.ReturnType">
            <summary>
            ReturnType relationship class of TableValuedFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableValuedFunction.BodyDependencies">
            <summary>
            BodyDependencies relationship class of TableValuedFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableValuedFunction.Columns">
            <summary>
            Columns relationship class of TableValuedFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableValuedFunction.Login">
            <summary>
            Login relationship class of TableValuedFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableValuedFunction.Parameters">
            <summary>
            Parameters relationship class of TableValuedFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableValuedFunction.Schema">
            <summary>
            Schema relationship class of TableValuedFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableValuedFunction.User">
            <summary>
            User relationship class of TableValuedFunction
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ScalarFunction">
            <summary>
            Model schema container class for ScalarFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ScalarFunction.TypeClass">
            <summary>
            Type class for ScalarFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ScalarFunction.ReturnsNullOnNullInput">
            <summary>
            ReturnsNullOnNullInput property class of ScalarFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ScalarFunction.AnsiNullsOn">
            <summary>
            AnsiNullsOn property class of ScalarFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ScalarFunction.CalledOnNullInput">
            <summary>
            CalledOnNullInput property class of ScalarFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ScalarFunction.ExecuteAsCaller">
            <summary>
            ExecuteAsCaller property class of ScalarFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ScalarFunction.WithEncryption">
            <summary>
            WithEncryption property class of ScalarFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ScalarFunction.ExecuteAsOwner">
            <summary>
            ExecuteAsOwner property class of ScalarFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ScalarFunction.QuotedIdentifierOn">
            <summary>
            QuotedIdentifierOn property class of ScalarFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ScalarFunction.WithSchemaBinding">
            <summary>
            WithSchemaBinding property class of ScalarFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ScalarFunction.ExecuteAsSelf">
            <summary>
            ExecuteAsSelf property class of ScalarFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ScalarFunction.ClassName">
            <summary>
            ClassName property class of ScalarFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ScalarFunction.DataAccess">
            <summary>
            DataAccess property class of ScalarFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ScalarFunction.FillRowMethodName">
            <summary>
            FillRowMethodName property class of ScalarFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ScalarFunction.Deterministic">
            <summary>
            Deterministic property class of ScalarFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ScalarFunction.Precise">
            <summary>
            Precise property class of ScalarFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ScalarFunction.MethodName">
            <summary>
            MethodName property class of ScalarFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ScalarFunction.SystemDataAccess">
            <summary>
            SystemDataAccess property class of ScalarFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ScalarFunction.IsNativeCompiled">
            <summary>
            IsNativeCompiled property class of ScalarFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ScalarFunction.IsReplicated">
            <summary>
            IsReplicated property class of ScalarFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ScalarFunction.Assembly">
            <summary>
            Assembly relationship class of ScalarFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ScalarFunction.ReturnType">
            <summary>
            ReturnType relationship class of ScalarFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ScalarFunction.BodyDependencies">
            <summary>
            BodyDependencies relationship class of ScalarFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ScalarFunction.Login">
            <summary>
            Login relationship class of ScalarFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ScalarFunction.Parameters">
            <summary>
            Parameters relationship class of ScalarFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ScalarFunction.Schema">
            <summary>
            Schema relationship class of ScalarFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ScalarFunction.User">
            <summary>
            User relationship class of ScalarFunction
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ClrTableOption">
            <summary>
            Model schema container class for ClrTableOption
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ClrTableOption.TypeClass">
            <summary>
            Type class for ClrTableOption
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ClrTableOption.ClassName">
            <summary>
            ClassName property class of ClrTableOption
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ClrTableOption.OrderColumns">
            <summary>
            OrderColumns relationship class of ClrTableOption
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ClrTableOption.OrderColumnsRelationship">
            <summary>
            Model schema container class for OrderColumnsRelationship
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ClrTableOption.OrderColumnsRelationship.RelationshipClass">
            <summary>
            Relationship class for OrderColumnsRelationship
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ClrTableOption.OrderColumnsRelationship.Ascending">
            <summary>
            Ascending property class of OrderColumnsRelationship
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.Aggregate">
            <summary>
            Model schema container class for Aggregate
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Aggregate.TypeClass">
            <summary>
            Type class for Aggregate
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Aggregate.InvariantToDuplicates">
            <summary>
            InvariantToDuplicates property class of Aggregate
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Aggregate.InvariantToNulls">
            <summary>
            InvariantToNulls property class of Aggregate
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Aggregate.NullIfEmpty">
            <summary>
            NullIfEmpty property class of Aggregate
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Aggregate.ClassName">
            <summary>
            ClassName property class of Aggregate
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Aggregate.Format">
            <summary>
            Format property class of Aggregate
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Aggregate.MaxByteSize">
            <summary>
            MaxByteSize property class of Aggregate
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Aggregate.ReturnType">
            <summary>
            ReturnType relationship class of Aggregate
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Aggregate.Assembly">
            <summary>
            Assembly relationship class of Aggregate
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Aggregate.Parameters">
            <summary>
            Parameters relationship class of Aggregate
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Aggregate.Schema">
            <summary>
            Schema relationship class of Aggregate
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ApplicationRole">
            <summary>
            Model schema container class for ApplicationRole
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ApplicationRole.TypeClass">
            <summary>
            Type class for ApplicationRole
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ApplicationRole.Password">
            <summary>
            Password property class of ApplicationRole
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ApplicationRole.DefaultSchema">
            <summary>
            DefaultSchema relationship class of ApplicationRole
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.Index">
            <summary>
            Model schema container class for Index
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Index.TypeClass">
            <summary>
            Type class for Index
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Index.AllowPageLocks">
            <summary>
            AllowPageLocks property class of Index
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Index.AllowRowLocks">
            <summary>
            AllowRowLocks property class of Index
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Index.IgnoreDuplicateKey">
            <summary>
            IgnoreDuplicateKey property class of Index
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Index.RecomputeStatistics">
            <summary>
            RecomputeStatistics property class of Index
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Index.IncrementalStatistics">
            <summary>
            IncrementalStatistics property class of Index
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Index.Clustered">
            <summary>
            Clustered property class of Index
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Index.Disabled">
            <summary>
            Disabled property class of Index
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Index.FileStreamNull">
            <summary>
            FileStreamNull property class of Index
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Index.WithPadIndex">
            <summary>
            WithPadIndex property class of Index
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Index.Unique">
            <summary>
            Unique property class of Index
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Index.FilterPredicate">
            <summary>
            FilterPredicate property class of Index
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Index.Hash">
            <summary>
            Hash property class of Index
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Index.BucketCount">
            <summary>
            BucketCount property class of Index
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Index.FillFactor">
            <summary>
            FillFactor property class of Index
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Index.Columns">
            <summary>
            Columns relationship class of Index
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Index.BodyDependencies">
            <summary>
            BodyDependencies relationship class of Index
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Index.DataCompressionOptions">
            <summary>
            DataCompressionOptions relationship class of Index
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Index.Filegroup">
            <summary>
            Filegroup relationship class of Index
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Index.FileStreamFilegroup">
            <summary>
            FileStreamFilegroup relationship class of Index
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Index.FileStreamPartitionScheme">
            <summary>
            FileStreamPartitionScheme relationship class of Index
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Index.IncludedColumns">
            <summary>
            IncludedColumns relationship class of Index
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Index.IndexedObject">
            <summary>
            IndexedObject relationship class of Index
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Index.PartitionColumn">
            <summary>
            PartitionColumn relationship class of Index
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Index.PartitionScheme">
            <summary>
            PartitionScheme relationship class of Index
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.Index.ColumnsRelationship">
            <summary>
            Model schema container class for ColumnsRelationship
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Index.ColumnsRelationship.RelationshipClass">
            <summary>
            Relationship class for ColumnsRelationship
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Index.ColumnsRelationship.Ascending">
            <summary>
            Ascending property class of ColumnsRelationship
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.Assembly">
            <summary>
            Model schema container class for Assembly
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Assembly.TypeClass">
            <summary>
            Type class for Assembly
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Assembly.Visible">
            <summary>
            Visible property class of Assembly
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Assembly.PermissionSet">
            <summary>
            PermissionSet property class of Assembly
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Assembly.AssemblySources">
            <summary>
            AssemblySources relationship class of Assembly
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Assembly.Authorizer">
            <summary>
            Authorizer relationship class of Assembly
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Assembly.ReferencedAssemblies">
            <summary>
            ReferencedAssemblies relationship class of Assembly
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.AssemblySource">
            <summary>
            Model schema container class for AssemblySource
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.AssemblySource.TypeClass">
            <summary>
            Type class for AssemblySource
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.AssemblySource.Source">
            <summary>
            Source property class of AssemblySource
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.AsymmetricKey">
            <summary>
            Model schema container class for AsymmetricKey
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.AsymmetricKey.TypeClass">
            <summary>
            Type class for AsymmetricKey
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.AsymmetricKey.Password">
            <summary>
            Password property class of AsymmetricKey
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.AsymmetricKey.EncryptedWithPassword">
            <summary>
            EncryptedWithPassword property class of AsymmetricKey
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.AsymmetricKey.Algorithm">
            <summary>
            Algorithm property class of AsymmetricKey
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.AsymmetricKey.CreationDisposition">
            <summary>
            CreationDisposition property class of AsymmetricKey
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.AsymmetricKey.ExecutableFile">
            <summary>
            ExecutableFile property class of AsymmetricKey
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.AsymmetricKey.File">
            <summary>
            File property class of AsymmetricKey
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.AsymmetricKey.ProviderKeyName">
            <summary>
            ProviderKeyName property class of AsymmetricKey
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.AsymmetricKey.Assembly">
            <summary>
            Assembly relationship class of AsymmetricKey
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.AsymmetricKey.Authorizer">
            <summary>
            Authorizer relationship class of AsymmetricKey
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.AsymmetricKey.Provider">
            <summary>
            Provider relationship class of AsymmetricKey
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.AuditAction">
            <summary>
            Model schema container class for AuditAction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.AuditAction.TypeClass">
            <summary>
            Type class for AuditAction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.AuditAction.Action">
            <summary>
            Action property class of AuditAction
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.AuditActionGroup">
            <summary>
            Model schema container class for AuditActionGroup
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.AuditActionGroup.TypeClass">
            <summary>
            Type class for AuditActionGroup
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.AuditActionGroup.ActionGroup">
            <summary>
            ActionGroup property class of AuditActionGroup
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.AuditActionSpecification">
            <summary>
            Model schema container class for AuditActionSpecification
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.AuditActionSpecification.TypeClass">
            <summary>
            Type class for AuditActionSpecification
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.AuditActionSpecification.AuditsDatabase">
            <summary>
            AuditsDatabase property class of AuditActionSpecification
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.AuditActionSpecification.AuditActions">
            <summary>
            AuditActions relationship class of AuditActionSpecification
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.AuditActionSpecification.Principals">
            <summary>
            Principals relationship class of AuditActionSpecification
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.AuditActionSpecification.SecuredObject">
            <summary>
            SecuredObject relationship class of AuditActionSpecification
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.BrokerPriority">
            <summary>
            Model schema container class for BrokerPriority
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.BrokerPriority.TypeClass">
            <summary>
            Type class for BrokerPriority
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.BrokerPriority.RemoteServiceName">
            <summary>
            RemoteServiceName property class of BrokerPriority
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.BrokerPriority.PriorityLevel">
            <summary>
            PriorityLevel property class of BrokerPriority
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.BrokerPriority.ContractName">
            <summary>
            ContractName relationship class of BrokerPriority
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.BrokerPriority.LocalServiceName">
            <summary>
            LocalServiceName relationship class of BrokerPriority
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.BuiltInServerRole">
            <summary>
            Model schema container class for BuiltInServerRole
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.BuiltInServerRole.TypeClass">
            <summary>
            Type class for BuiltInServerRole
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.DataType">
            <summary>
            Model schema container class for DataType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DataType.TypeClass">
            <summary>
            Type class for DataType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DataType.UddtNullable">
            <summary>
            UddtNullable property class of DataType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DataType.UddtIsMax">
            <summary>
            UddtIsMax property class of DataType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DataType.UddtLength">
            <summary>
            UddtLength property class of DataType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DataType.UddtPrecision">
            <summary>
            UddtPrecision property class of DataType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DataType.UddtScale">
            <summary>
            UddtScale property class of DataType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DataType.SqlDataType">
            <summary>
            SqlDataType property class of DataType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DataType.Schema">
            <summary>
            Schema relationship class of DataType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DataType.Type">
            <summary>
            Type relationship class of DataType
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.Certificate">
            <summary>
            Model schema container class for Certificate
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Certificate.TypeClass">
            <summary>
            Type class for Certificate
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Certificate.ActiveForBeginDialog">
            <summary>
            ActiveForBeginDialog property class of Certificate
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Certificate.EncryptedWithPassword">
            <summary>
            EncryptedWithPassword property class of Certificate
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Certificate.EncryptionPassword">
            <summary>
            EncryptionPassword property class of Certificate
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Certificate.ExpiryDate">
            <summary>
            ExpiryDate property class of Certificate
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Certificate.StartDate">
            <summary>
            StartDate property class of Certificate
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Certificate.Subject">
            <summary>
            Subject property class of Certificate
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Certificate.PrivateKeyFilePath">
            <summary>
            PrivateKeyFilePath property class of Certificate
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Certificate.ExistingKeysFilePath">
            <summary>
            ExistingKeysFilePath property class of Certificate
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Certificate.IsExistingKeyFileExecutable">
            <summary>
            IsExistingKeyFileExecutable property class of Certificate
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Certificate.PrivateKeyDecryptionPassword">
            <summary>
            PrivateKeyDecryptionPassword property class of Certificate
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Certificate.PrivateKeyEncryptionPassword">
            <summary>
            PrivateKeyEncryptionPassword property class of Certificate
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Certificate.Authorizer">
            <summary>
            Authorizer relationship class of Certificate
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Certificate.ExistingKeysAssembly">
            <summary>
            ExistingKeysAssembly relationship class of Certificate
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.CheckConstraint">
            <summary>
            Model schema container class for CheckConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.CheckConstraint.TypeClass">
            <summary>
            Type class for CheckConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.CheckConstraint.Expression">
            <summary>
            Expression property class of CheckConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.CheckConstraint.Disabled">
            <summary>
            Disabled property class of CheckConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.CheckConstraint.NotForReplication">
            <summary>
            NotForReplication property class of CheckConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.CheckConstraint.ExpressionDependencies">
            <summary>
            ExpressionDependencies relationship class of CheckConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.CheckConstraint.Host">
            <summary>
            Host relationship class of CheckConstraint
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ClrTypeMethod">
            <summary>
            Model schema container class for ClrTypeMethod
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ClrTypeMethod.TypeClass">
            <summary>
            Type class for ClrTypeMethod
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ClrTypeMethod.Name">
            <summary>
            Name property class of ClrTypeMethod
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ClrTypeMethod.Parameters">
            <summary>
            Parameters relationship class of ClrTypeMethod
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ClrTypeMethod.ReturnType">
            <summary>
            ReturnType relationship class of ClrTypeMethod
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ClrTypeMethodParameter">
            <summary>
            Model schema container class for ClrTypeMethodParameter
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ClrTypeMethodParameter.TypeClass">
            <summary>
            Type class for ClrTypeMethodParameter
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ClrTypeMethodParameter.Name">
            <summary>
            Name property class of ClrTypeMethodParameter
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ClrTypeMethodParameter.IsOutput">
            <summary>
            IsOutput property class of ClrTypeMethodParameter
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ClrTypeMethodParameter.DataType">
            <summary>
            DataType relationship class of ClrTypeMethodParameter
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ClrTypeProperty">
            <summary>
            Model schema container class for ClrTypeProperty
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ClrTypeProperty.TypeClass">
            <summary>
            Type class for ClrTypeProperty
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ClrTypeProperty.Name">
            <summary>
            Name property class of ClrTypeProperty
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ClrTypeProperty.ClrType">
            <summary>
            ClrType relationship class of ClrTypeProperty
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ColumnStoreIndex">
            <summary>
            Model schema container class for ColumnStoreIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ColumnStoreIndex.TypeClass">
            <summary>
            Type class for ColumnStoreIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ColumnStoreIndex.Disabled">
            <summary>
            Disabled property class of ColumnStoreIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ColumnStoreIndex.Clustered">
            <summary>
            Clustered property class of ColumnStoreIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ColumnStoreIndex.FilterPredicate">
            <summary>
            FilterPredicate property class of ColumnStoreIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ColumnStoreIndex.CompressionDelay">
            <summary>
            CompressionDelay property class of ColumnStoreIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ColumnStoreIndex.Columns">
            <summary>
            Columns relationship class of ColumnStoreIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ColumnStoreIndex.BodyDependencies">
            <summary>
            BodyDependencies relationship class of ColumnStoreIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ColumnStoreIndex.DataCompressionOptions">
            <summary>
            DataCompressionOptions relationship class of ColumnStoreIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ColumnStoreIndex.Filegroup">
            <summary>
            Filegroup relationship class of ColumnStoreIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ColumnStoreIndex.IndexedObject">
            <summary>
            IndexedObject relationship class of ColumnStoreIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ColumnStoreIndex.PartitionColumn">
            <summary>
            PartitionColumn relationship class of ColumnStoreIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ColumnStoreIndex.PartitionScheme">
            <summary>
            PartitionScheme relationship class of ColumnStoreIndex
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ColumnStoreIndex.ColumnsRelationship">
            <summary>
            Model schema container class for ColumnsRelationship
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ColumnStoreIndex.ColumnsRelationship.RelationshipClass">
            <summary>
            Relationship class for ColumnsRelationship
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ColumnStoreIndex.ColumnsRelationship.Ascending">
            <summary>
            Ascending property class of ColumnsRelationship
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.Contract">
            <summary>
            Model schema container class for Contract
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Contract.TypeClass">
            <summary>
            Type class for Contract
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Contract.Messages">
            <summary>
            Messages relationship class of Contract
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Contract.Authorizer">
            <summary>
            Authorizer relationship class of Contract
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.Contract.MessagesRelationship">
            <summary>
            Model schema container class for MessagesRelationship
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Contract.MessagesRelationship.RelationshipClass">
            <summary>
            Relationship class for MessagesRelationship
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Contract.MessagesRelationship.Default">
            <summary>
            Default property class of MessagesRelationship
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Contract.MessagesRelationship.SentBy">
            <summary>
            SentBy property class of MessagesRelationship
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.Credential">
            <summary>
            Model schema container class for Credential
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Credential.TypeClass">
            <summary>
            Type class for Credential
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Credential.Identity">
            <summary>
            Identity property class of Credential
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Credential.Secret">
            <summary>
            Secret property class of Credential
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Credential.CryptographicProvider">
            <summary>
            CryptographicProvider relationship class of Credential
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.DatabaseCredential">
            <summary>
            Model schema container class for DatabaseCredential
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseCredential.TypeClass">
            <summary>
            Type class for DatabaseCredential
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseCredential.Identity">
            <summary>
            Identity property class of DatabaseCredential
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseCredential.Secret">
            <summary>
            Secret property class of DatabaseCredential
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.CryptographicProvider">
            <summary>
            Model schema container class for CryptographicProvider
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.CryptographicProvider.TypeClass">
            <summary>
            Type class for CryptographicProvider
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.CryptographicProvider.DllPath">
            <summary>
            DllPath property class of CryptographicProvider
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.CryptographicProvider.Enabled">
            <summary>
            Enabled property class of CryptographicProvider
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.DatabaseAuditSpecification">
            <summary>
            Model schema container class for DatabaseAuditSpecification
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseAuditSpecification.TypeClass">
            <summary>
            Type class for DatabaseAuditSpecification
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseAuditSpecification.WithState">
            <summary>
            WithState property class of DatabaseAuditSpecification
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseAuditSpecification.AuditActionGroups">
            <summary>
            AuditActionGroups relationship class of DatabaseAuditSpecification
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseAuditSpecification.AuditActions">
            <summary>
            AuditActions relationship class of DatabaseAuditSpecification
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseAuditSpecification.ServerAudit">
            <summary>
            ServerAudit relationship class of DatabaseAuditSpecification
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.DatabaseDdlTrigger">
            <summary>
            Model schema container class for DatabaseDdlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseDdlTrigger.TypeClass">
            <summary>
            Type class for DatabaseDdlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseDdlTrigger.AnsiNullsOn">
            <summary>
            AnsiNullsOn property class of DatabaseDdlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseDdlTrigger.ExecuteAsCaller">
            <summary>
            ExecuteAsCaller property class of DatabaseDdlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseDdlTrigger.Disabled">
            <summary>
            Disabled property class of DatabaseDdlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseDdlTrigger.WithEncryption">
            <summary>
            WithEncryption property class of DatabaseDdlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseDdlTrigger.ExecuteAsOwner">
            <summary>
            ExecuteAsOwner property class of DatabaseDdlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseDdlTrigger.QuotedIdentifierOn">
            <summary>
            QuotedIdentifierOn property class of DatabaseDdlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseDdlTrigger.ExecuteAsSelf">
            <summary>
            ExecuteAsSelf property class of DatabaseDdlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseDdlTrigger.TriggerType">
            <summary>
            TriggerType property class of DatabaseDdlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseDdlTrigger.ClassName">
            <summary>
            ClassName property class of DatabaseDdlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseDdlTrigger.MethodName">
            <summary>
            MethodName property class of DatabaseDdlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseDdlTrigger.Assembly">
            <summary>
            Assembly relationship class of DatabaseDdlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseDdlTrigger.BodyDependencies">
            <summary>
            BodyDependencies relationship class of DatabaseDdlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseDdlTrigger.EventGroup">
            <summary>
            EventGroup relationship class of DatabaseDdlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseDdlTrigger.EventType">
            <summary>
            EventType relationship class of DatabaseDdlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseDdlTrigger.Login">
            <summary>
            Login relationship class of DatabaseDdlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseDdlTrigger.User">
            <summary>
            User relationship class of DatabaseDdlTrigger
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.DatabaseEncryptionKey">
            <summary>
            Model schema container class for DatabaseEncryptionKey
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseEncryptionKey.TypeClass">
            <summary>
            Type class for DatabaseEncryptionKey
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseEncryptionKey.Algorithm">
            <summary>
            Algorithm property class of DatabaseEncryptionKey
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseEncryptionKey.Certificate">
            <summary>
            Certificate relationship class of DatabaseEncryptionKey
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseEncryptionKey.AsymmetricKey">
            <summary>
            AsymmetricKey relationship class of DatabaseEncryptionKey
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.DatabaseEventNotification">
            <summary>
            Model schema container class for DatabaseEventNotification
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseEventNotification.TypeClass">
            <summary>
            Type class for DatabaseEventNotification
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseEventNotification.WithFanIn">
            <summary>
            WithFanIn property class of DatabaseEventNotification
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseEventNotification.BrokerService">
            <summary>
            BrokerService property class of DatabaseEventNotification
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseEventNotification.BrokerInstanceSpecifier">
            <summary>
            BrokerInstanceSpecifier property class of DatabaseEventNotification
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseEventNotification.EventGroup">
            <summary>
            EventGroup relationship class of DatabaseEventNotification
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseEventNotification.EventType">
            <summary>
            EventType relationship class of DatabaseEventNotification
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.DatabaseMirroringLanguageSpecifier">
            <summary>
            Model schema container class for DatabaseMirroringLanguageSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseMirroringLanguageSpecifier.TypeClass">
            <summary>
            Type class for DatabaseMirroringLanguageSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseMirroringLanguageSpecifier.WindowsAuthenticationMode">
            <summary>
            WindowsAuthenticationMode property class of DatabaseMirroringLanguageSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseMirroringLanguageSpecifier.UseCertificateFirst">
            <summary>
            UseCertificateFirst property class of DatabaseMirroringLanguageSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseMirroringLanguageSpecifier.EncryptionAlgorithmPart1">
            <summary>
            EncryptionAlgorithmPart1 property class of DatabaseMirroringLanguageSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseMirroringLanguageSpecifier.EncryptionAlgorithmPart2">
            <summary>
            EncryptionAlgorithmPart2 property class of DatabaseMirroringLanguageSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseMirroringLanguageSpecifier.EncryptionMode">
            <summary>
            EncryptionMode property class of DatabaseMirroringLanguageSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseMirroringLanguageSpecifier.RoleType">
            <summary>
            RoleType property class of DatabaseMirroringLanguageSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseMirroringLanguageSpecifier.AuthenticationCertificate">
            <summary>
            AuthenticationCertificate relationship class of DatabaseMirroringLanguageSpecifier
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.DatabaseOptions">
            <summary>
            Model schema container class for DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.TypeClass">
            <summary>
            Type class for DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.CompatibilityLevel">
            <summary>
            CompatibilityLevel property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.AllowSnapshotIsolation">
            <summary>
            AllowSnapshotIsolation property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.AnsiNullDefaultOn">
            <summary>
            AnsiNullDefaultOn property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.AnsiNullsOn">
            <summary>
            AnsiNullsOn property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.AnsiPaddingOn">
            <summary>
            AnsiPaddingOn property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.AnsiWarningsOn">
            <summary>
            AnsiWarningsOn property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.ArithAbortOn">
            <summary>
            ArithAbortOn property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.AutoClose">
            <summary>
            AutoClose property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.AutoCreateStatistics">
            <summary>
            AutoCreateStatistics property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.AutoCreateStatisticsIncremental">
            <summary>
            AutoCreateStatisticsIncremental property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.AutoShrink">
            <summary>
            AutoShrink property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.AutoUpdateStatisticsAsync">
            <summary>
            AutoUpdateStatisticsAsync property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.AutoUpdateStatistics">
            <summary>
            AutoUpdateStatistics property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.HonorBrokerPriority">
            <summary>
            HonorBrokerPriority property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.ChangeTrackingAutoCleanup">
            <summary>
            ChangeTrackingAutoCleanup property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.ChangeTrackingEnabled">
            <summary>
            ChangeTrackingEnabled property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.ConcatNullYieldsNull">
            <summary>
            ConcatNullYieldsNull property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.CursorCloseOnCommit">
            <summary>
            CursorCloseOnCommit property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.CursorDefaultGlobalScope">
            <summary>
            CursorDefaultGlobalScope property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.DateCorrelationOptimizationOn">
            <summary>
            DateCorrelationOptimizationOn property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.DBChainingOn">
            <summary>
            DBChainingOn property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.WithEncryption">
            <summary>
            WithEncryption property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.FullTextEnabled">
            <summary>
            FullTextEnabled property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.NestedTriggersOn">
            <summary>
            NestedTriggersOn property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.NumericRoundAbortOn">
            <summary>
            NumericRoundAbortOn property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.DatabaseStateOffline">
            <summary>
            DatabaseStateOffline property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.QuotedIdentifierOn">
            <summary>
            QuotedIdentifierOn property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.TransactionIsolationReadCommittedSnapshot">
            <summary>
            TransactionIsolationReadCommittedSnapshot property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.ReadOnly">
            <summary>
            ReadOnly property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.RecursiveTriggersOn">
            <summary>
            RecursiveTriggersOn property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.SupplementalLoggingOn">
            <summary>
            SupplementalLoggingOn property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.TornPageProtectionOn">
            <summary>
            TornPageProtectionOn property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.TransformNoiseWords">
            <summary>
            TransformNoiseWords property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.Trustworthy">
            <summary>
            Trustworthy property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.VardecimalStorageFormatOn">
            <summary>
            VardecimalStorageFormatOn property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.UserAccessOption">
            <summary>
            UserAccessOption property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.DelayedDurabilityMode">
            <summary>
            DelayedDurabilityMode property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.MemoryOptimizedElevateToSnapshot">
            <summary>
            MemoryOptimizedElevateToSnapshot property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.ChangeTrackingRetentionPeriod">
            <summary>
            ChangeTrackingRetentionPeriod property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.ChangeTrackingRetentionUnit">
            <summary>
            ChangeTrackingRetentionUnit property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.Collation">
            <summary>
            Collation property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.Containment">
            <summary>
            Containment property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.DefaultFullTextLanguage">
            <summary>
            DefaultFullTextLanguage property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.DefaultLanguage">
            <summary>
            DefaultLanguage property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.FileStreamDirectoryName">
            <summary>
            FileStreamDirectoryName property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.LegacyCardinalityEstimation">
            <summary>
            LegacyCardinalityEstimation property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.LegacyCardinalityEstimationForSecondary">
            <summary>
            LegacyCardinalityEstimationForSecondary property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.MaxDop">
            <summary>
            MaxDop property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.MaxDopForSecondary">
            <summary>
            MaxDopForSecondary property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.NonTransactedFileStreamAccess">
            <summary>
            NonTransactedFileStreamAccess property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.PageVerifyMode">
            <summary>
            PageVerifyMode property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.ParameterizationOption">
            <summary>
            ParameterizationOption property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.ParameterSniffing">
            <summary>
            ParameterSniffing property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.ParameterSniffingForSecondary">
            <summary>
            ParameterSniffingForSecondary property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.QueryOptimizerHotfixes">
            <summary>
            QueryOptimizerHotfixes property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.QueryOptimizerHotfixesForSecondary">
            <summary>
            QueryOptimizerHotfixesForSecondary property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.QueryStoreCaptureMode">
            <summary>
            QueryStoreCaptureMode property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.QueryStoreDesiredState">
            <summary>
            QueryStoreDesiredState property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.QueryStoreFlushInterval">
            <summary>
            QueryStoreFlushInterval property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.QueryStoreIntervalLength">
            <summary>
            QueryStoreIntervalLength property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.QueryStoreMaxPlansPerQuery">
            <summary>
            QueryStoreMaxPlansPerQuery property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.QueryStoreMaxStorageSize">
            <summary>
            QueryStoreMaxStorageSize property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.QueryStoreStaleQueryThreshold">
            <summary>
            QueryStoreStaleQueryThreshold property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.RecoveryMode">
            <summary>
            RecoveryMode property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.RemoteDataEnabled">
            <summary>
            RemoteDataEnabled property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.ServiceBrokerOption">
            <summary>
            ServiceBrokerOption property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.TargetRecoveryTimePeriod">
            <summary>
            TargetRecoveryTimePeriod property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.TargetRecoveryTimeUnit">
            <summary>
            TargetRecoveryTimeUnit property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.TemporalHistoryRetentionEnabled">
            <summary>
            TemporalHistoryRetentionEnabled property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.TwoDigitYearCutoff">
            <summary>
            TwoDigitYearCutoff property class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.DefaultFilegroup">
            <summary>
            DefaultFilegroup relationship class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.DefaultFileStreamFilegroup">
            <summary>
            DefaultFileStreamFilegroup relationship class of DatabaseOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseOptions.GenericDatabaseScopedConfigurationOptions">
            <summary>
            GenericDatabaseScopedConfigurationOptions relationship class of DatabaseOptions
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.DataCompressionOption">
            <summary>
            Model schema container class for DataCompressionOption
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DataCompressionOption.TypeClass">
            <summary>
            Type class for DataCompressionOption
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DataCompressionOption.CompressionLevel">
            <summary>
            CompressionLevel property class of DataCompressionOption
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DataCompressionOption.PartitionNumber">
            <summary>
            PartitionNumber property class of DataCompressionOption
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.Default">
            <summary>
            Model schema container class for Default
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Default.TypeClass">
            <summary>
            Type class for Default
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Default.Expression">
            <summary>
            Expression property class of Default
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Default.BoundObjects">
            <summary>
            BoundObjects relationship class of Default
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Default.Schema">
            <summary>
            Schema relationship class of Default
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.DefaultConstraint">
            <summary>
            Model schema container class for DefaultConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DefaultConstraint.TypeClass">
            <summary>
            Type class for DefaultConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DefaultConstraint.Expression">
            <summary>
            Expression property class of DefaultConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DefaultConstraint.Disabled">
            <summary>
            Disabled property class of DefaultConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DefaultConstraint.WithValues">
            <summary>
            WithValues property class of DefaultConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DefaultConstraint.Host">
            <summary>
            Host relationship class of DefaultConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DefaultConstraint.TargetColumn">
            <summary>
            TargetColumn relationship class of DefaultConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DefaultConstraint.ExpressionDependencies">
            <summary>
            ExpressionDependencies relationship class of DefaultConstraint
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.DmlTrigger">
            <summary>
            Model schema container class for DmlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DmlTrigger.TypeClass">
            <summary>
            Type class for DmlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DmlTrigger.AnsiNullsOn">
            <summary>
            AnsiNullsOn property class of DmlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DmlTrigger.ExecuteAsCaller">
            <summary>
            ExecuteAsCaller property class of DmlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DmlTrigger.Disabled">
            <summary>
            Disabled property class of DmlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DmlTrigger.WithEncryption">
            <summary>
            WithEncryption property class of DmlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DmlTrigger.NotForReplication">
            <summary>
            NotForReplication property class of DmlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DmlTrigger.ExecuteAsOwner">
            <summary>
            ExecuteAsOwner property class of DmlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DmlTrigger.QuotedIdentifierOn">
            <summary>
            QuotedIdentifierOn property class of DmlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DmlTrigger.ExecuteAsSelf">
            <summary>
            ExecuteAsSelf property class of DmlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DmlTrigger.WithAppend">
            <summary>
            WithAppend property class of DmlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DmlTrigger.TriggerType">
            <summary>
            TriggerType property class of DmlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DmlTrigger.ClassName">
            <summary>
            ClassName property class of DmlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DmlTrigger.DeleteOrderRestriction">
            <summary>
            DeleteOrderRestriction property class of DmlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DmlTrigger.InsertOrderRestriction">
            <summary>
            InsertOrderRestriction property class of DmlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DmlTrigger.IsDeleteTrigger">
            <summary>
            IsDeleteTrigger property class of DmlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DmlTrigger.IsInsertTrigger">
            <summary>
            IsInsertTrigger property class of DmlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DmlTrigger.IsNativeCompiled">
            <summary>
            IsNativeCompiled property class of DmlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DmlTrigger.IsSchemaBound">
            <summary>
            IsSchemaBound property class of DmlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DmlTrigger.IsUpdateTrigger">
            <summary>
            IsUpdateTrigger property class of DmlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DmlTrigger.MethodName">
            <summary>
            MethodName property class of DmlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DmlTrigger.UpdateOrderRestriction">
            <summary>
            UpdateOrderRestriction property class of DmlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DmlTrigger.TriggerObject">
            <summary>
            TriggerObject relationship class of DmlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DmlTrigger.Assembly">
            <summary>
            Assembly relationship class of DmlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DmlTrigger.BodyDependencies">
            <summary>
            BodyDependencies relationship class of DmlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DmlTrigger.Login">
            <summary>
            Login relationship class of DmlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DmlTrigger.User">
            <summary>
            User relationship class of DmlTrigger
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.Endpoint">
            <summary>
            Model schema container class for Endpoint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Endpoint.TypeClass">
            <summary>
            Type class for Endpoint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Endpoint.Payload">
            <summary>
            Payload property class of Endpoint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Endpoint.Protocol">
            <summary>
            Protocol property class of Endpoint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Endpoint.State">
            <summary>
            State property class of Endpoint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Endpoint.Authorizer">
            <summary>
            Authorizer relationship class of Endpoint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Endpoint.PayloadSpecifier">
            <summary>
            PayloadSpecifier relationship class of Endpoint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Endpoint.ProtocolSpecifier">
            <summary>
            ProtocolSpecifier relationship class of Endpoint
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ErrorMessage">
            <summary>
            Model schema container class for ErrorMessage
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ErrorMessage.TypeClass">
            <summary>
            Type class for ErrorMessage
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ErrorMessage.WithLog">
            <summary>
            WithLog property class of ErrorMessage
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ErrorMessage.Language">
            <summary>
            Language property class of ErrorMessage
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ErrorMessage.MessageNumber">
            <summary>
            MessageNumber property class of ErrorMessage
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ErrorMessage.MessageText">
            <summary>
            MessageText property class of ErrorMessage
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ErrorMessage.Severity">
            <summary>
            Severity property class of ErrorMessage
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.EventGroup">
            <summary>
            Model schema container class for EventGroup
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.EventGroup.TypeClass">
            <summary>
            Type class for EventGroup
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.EventGroup.Group">
            <summary>
            Group property class of EventGroup
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.EventSession">
            <summary>
            Model schema container class for EventSession
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.EventSession.TypeClass">
            <summary>
            Type class for EventSession
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.EventSession.StartupState">
            <summary>
            StartupState property class of EventSession
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.EventSession.TrackCausality">
            <summary>
            TrackCausality property class of EventSession
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.EventSession.MaxDispatchLatency">
            <summary>
            MaxDispatchLatency property class of EventSession
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.EventSession.MaxEventSizeUnit">
            <summary>
            MaxEventSizeUnit property class of EventSession
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.EventSession.MaxMemoryUnit">
            <summary>
            MaxMemoryUnit property class of EventSession
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.EventSession.EventRetentionMode">
            <summary>
            EventRetentionMode property class of EventSession
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.EventSession.MaxEventSize">
            <summary>
            MaxEventSize property class of EventSession
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.EventSession.MaxMemory">
            <summary>
            MaxMemory property class of EventSession
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.EventSession.MemoryPartitionMode">
            <summary>
            MemoryPartitionMode property class of EventSession
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.EventSession.SessionScope">
            <summary>
            SessionScope property class of EventSession
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.EventSession.EventDefinitions">
            <summary>
            EventDefinitions relationship class of EventSession
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.EventSession.EventTargets">
            <summary>
            EventTargets relationship class of EventSession
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.DatabaseEventSession">
            <summary>
            Model schema container class for DatabaseEventSession
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseEventSession.TypeClass">
            <summary>
            Type class for DatabaseEventSession
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseEventSession.StartupState">
            <summary>
            StartupState property class of DatabaseEventSession
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseEventSession.TrackCausality">
            <summary>
            TrackCausality property class of DatabaseEventSession
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseEventSession.MaxDispatchLatency">
            <summary>
            MaxDispatchLatency property class of DatabaseEventSession
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseEventSession.MaxEventSizeUnit">
            <summary>
            MaxEventSizeUnit property class of DatabaseEventSession
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseEventSession.MaxMemoryUnit">
            <summary>
            MaxMemoryUnit property class of DatabaseEventSession
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseEventSession.EventRetentionMode">
            <summary>
            EventRetentionMode property class of DatabaseEventSession
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseEventSession.MaxEventSize">
            <summary>
            MaxEventSize property class of DatabaseEventSession
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseEventSession.MaxMemory">
            <summary>
            MaxMemory property class of DatabaseEventSession
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseEventSession.MemoryPartitionMode">
            <summary>
            MemoryPartitionMode property class of DatabaseEventSession
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseEventSession.SessionScope">
            <summary>
            SessionScope property class of DatabaseEventSession
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseEventSession.EventDefinitions">
            <summary>
            EventDefinitions relationship class of DatabaseEventSession
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.DatabaseEventSession.EventTargets">
            <summary>
            EventTargets relationship class of DatabaseEventSession
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.EventSessionAction">
            <summary>
            Model schema container class for EventSessionAction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.EventSessionAction.TypeClass">
            <summary>
            Type class for EventSessionAction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.EventSessionAction.ActionName">
            <summary>
            ActionName property class of EventSessionAction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.EventSessionAction.EventModuleGuid">
            <summary>
            EventModuleGuid property class of EventSessionAction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.EventSessionAction.EventPackageName">
            <summary>
            EventPackageName property class of EventSessionAction
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.EventSessionDefinitions">
            <summary>
            Model schema container class for EventSessionDefinitions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.EventSessionDefinitions.TypeClass">
            <summary>
            Type class for EventSessionDefinitions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.EventSessionDefinitions.WhereExpression">
            <summary>
            WhereExpression property class of EventSessionDefinitions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.EventSessionDefinitions.EventModuleGuid">
            <summary>
            EventModuleGuid property class of EventSessionDefinitions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.EventSessionDefinitions.EventName">
            <summary>
            EventName property class of EventSessionDefinitions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.EventSessionDefinitions.EventPackageName">
            <summary>
            EventPackageName property class of EventSessionDefinitions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.EventSessionDefinitions.Actions">
            <summary>
            Actions relationship class of EventSessionDefinitions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.EventSessionDefinitions.AttributeSettings">
            <summary>
            AttributeSettings relationship class of EventSessionDefinitions
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.EventSessionSetting">
            <summary>
            Model schema container class for EventSessionSetting
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.EventSessionSetting.TypeClass">
            <summary>
            Type class for EventSessionSetting
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.EventSessionSetting.SettingValue">
            <summary>
            SettingValue property class of EventSessionSetting
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.EventSessionSetting.SettingName">
            <summary>
            SettingName property class of EventSessionSetting
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.EventSessionTarget">
            <summary>
            Model schema container class for EventSessionTarget
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.EventSessionTarget.TypeClass">
            <summary>
            Type class for EventSessionTarget
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.EventSessionTarget.EventModuleGuid">
            <summary>
            EventModuleGuid property class of EventSessionTarget
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.EventSessionTarget.EventPackageName">
            <summary>
            EventPackageName property class of EventSessionTarget
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.EventSessionTarget.TargetName">
            <summary>
            TargetName property class of EventSessionTarget
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.EventSessionTarget.ParameterSettings">
            <summary>
            ParameterSettings relationship class of EventSessionTarget
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.EventTypeSpecifier">
            <summary>
            Model schema container class for EventTypeSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.EventTypeSpecifier.TypeClass">
            <summary>
            Type class for EventTypeSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.EventTypeSpecifier.EventType">
            <summary>
            EventType property class of EventTypeSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.EventTypeSpecifier.Order">
            <summary>
            Order property class of EventTypeSpecifier
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ExtendedProcedure">
            <summary>
            Model schema container class for ExtendedProcedure
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExtendedProcedure.TypeClass">
            <summary>
            Type class for ExtendedProcedure
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExtendedProcedure.ExeccuteAsCaller">
            <summary>
            ExeccuteAsCaller property class of ExtendedProcedure
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExtendedProcedure.WithEncryption">
            <summary>
            WithEncryption property class of ExtendedProcedure
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExtendedProcedure.ExecuteAsOwner">
            <summary>
            ExecuteAsOwner property class of ExtendedProcedure
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExtendedProcedure.ExecuteAsSelf">
            <summary>
            ExecuteAsSelf property class of ExtendedProcedure
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExtendedProcedure.Login">
            <summary>
            Login relationship class of ExtendedProcedure
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExtendedProcedure.Parameters">
            <summary>
            Parameters relationship class of ExtendedProcedure
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExtendedProcedure.Schema">
            <summary>
            Schema relationship class of ExtendedProcedure
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExtendedProcedure.User">
            <summary>
            User relationship class of ExtendedProcedure
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ExtendedProperty">
            <summary>
            Model schema container class for ExtendedProperty
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExtendedProperty.TypeClass">
            <summary>
            Type class for ExtendedProperty
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExtendedProperty.Value">
            <summary>
            Value property class of ExtendedProperty
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExtendedProperty.Host">
            <summary>
            Host relationship class of ExtendedProperty
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ExternalDataSource">
            <summary>
            Model schema container class for ExternalDataSource
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExternalDataSource.TypeClass">
            <summary>
            Type class for ExternalDataSource
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExternalDataSource.DatabaseName">
            <summary>
            DatabaseName property class of ExternalDataSource
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExternalDataSource.DataSourceType">
            <summary>
            DataSourceType property class of ExternalDataSource
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExternalDataSource.Location">
            <summary>
            Location property class of ExternalDataSource
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExternalDataSource.ResourceManagerLocation">
            <summary>
            ResourceManagerLocation property class of ExternalDataSource
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExternalDataSource.ShardMapName">
            <summary>
            ShardMapName property class of ExternalDataSource
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExternalDataSource.Credential">
            <summary>
            Credential relationship class of ExternalDataSource
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ExternalFileFormat">
            <summary>
            Model schema container class for ExternalFileFormat
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExternalFileFormat.TypeClass">
            <summary>
            Type class for ExternalFileFormat
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExternalFileFormat.DataCompression">
            <summary>
            DataCompression property class of ExternalFileFormat
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExternalFileFormat.DateFormat">
            <summary>
            DateFormat property class of ExternalFileFormat
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExternalFileFormat.FieldTerminator">
            <summary>
            FieldTerminator property class of ExternalFileFormat
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExternalFileFormat.FormatType">
            <summary>
            FormatType property class of ExternalFileFormat
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExternalFileFormat.SerDeMethod">
            <summary>
            SerDeMethod property class of ExternalFileFormat
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExternalFileFormat.StringDelimiter">
            <summary>
            StringDelimiter property class of ExternalFileFormat
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExternalFileFormat.UseTypeDefault">
            <summary>
            UseTypeDefault property class of ExternalFileFormat
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ExternalTable">
            <summary>
            Model schema container class for ExternalTable
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExternalTable.TypeClass">
            <summary>
            Type class for ExternalTable
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExternalTable.DistributionPolicyType">
            <summary>
            DistributionPolicyType property class of ExternalTable
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExternalTable.ExternalObjectName">
            <summary>
            ExternalObjectName property class of ExternalTable
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExternalTable.ExternalSchemaName">
            <summary>
            ExternalSchemaName property class of ExternalTable
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExternalTable.IsAnsiNullsOn">
            <summary>
            IsAnsiNullsOn property class of ExternalTable
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExternalTable.IsFileStreamNull">
            <summary>
            IsFileStreamNull property class of ExternalTable
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExternalTable.IsQuotedIdentifierOn">
            <summary>
            IsQuotedIdentifierOn property class of ExternalTable
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExternalTable.IsTableLockOnBulkLoad">
            <summary>
            IsTableLockOnBulkLoad property class of ExternalTable
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExternalTable.Location">
            <summary>
            Location property class of ExternalTable
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExternalTable.LockEscalation">
            <summary>
            LockEscalation property class of ExternalTable
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExternalTable.RejectSampleValue">
            <summary>
            RejectSampleValue property class of ExternalTable
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExternalTable.RejectType">
            <summary>
            RejectType property class of ExternalTable
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExternalTable.RejectValue">
            <summary>
            RejectValue property class of ExternalTable
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExternalTable.Columns">
            <summary>
            Columns relationship class of ExternalTable
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExternalTable.DataCompressionOptions">
            <summary>
            DataCompressionOptions relationship class of ExternalTable
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExternalTable.DataSourceName">
            <summary>
            DataSourceName relationship class of ExternalTable
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExternalTable.FileFormatName">
            <summary>
            FileFormatName relationship class of ExternalTable
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExternalTable.Filegroup">
            <summary>
            Filegroup relationship class of ExternalTable
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExternalTable.FileStreamFilegroup">
            <summary>
            FileStreamFilegroup relationship class of ExternalTable
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExternalTable.FileStreamPartitionScheme">
            <summary>
            FileStreamPartitionScheme relationship class of ExternalTable
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExternalTable.PartitionColumn">
            <summary>
            PartitionColumn relationship class of ExternalTable
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExternalTable.PartitionScheme">
            <summary>
            PartitionScheme relationship class of ExternalTable
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExternalTable.Schema">
            <summary>
            Schema relationship class of ExternalTable
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ExternalTable.ShardingColumn">
            <summary>
            ShardingColumn relationship class of ExternalTable
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.SqlFile">
            <summary>
            Model schema container class for SqlFile
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SqlFile.TypeClass">
            <summary>
            Type class for SqlFile
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SqlFile.Offline">
            <summary>
            Offline property class of SqlFile
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SqlFile.Unlimited">
            <summary>
            Unlimited property class of SqlFile
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SqlFile.FileGrowth">
            <summary>
            FileGrowth property class of SqlFile
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SqlFile.FileGrowthUnit">
            <summary>
            FileGrowthUnit property class of SqlFile
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SqlFile.FileName">
            <summary>
            FileName property class of SqlFile
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SqlFile.IsLogFile">
            <summary>
            IsLogFile property class of SqlFile
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SqlFile.MaxSize">
            <summary>
            MaxSize property class of SqlFile
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SqlFile.MaxSizeUnit">
            <summary>
            MaxSizeUnit property class of SqlFile
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SqlFile.Size">
            <summary>
            Size property class of SqlFile
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SqlFile.SizeUnit">
            <summary>
            SizeUnit property class of SqlFile
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SqlFile.Filegroup">
            <summary>
            Filegroup relationship class of SqlFile
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.Filegroup">
            <summary>
            Model schema container class for Filegroup
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Filegroup.TypeClass">
            <summary>
            Type class for Filegroup
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Filegroup.ContainsFileStream">
            <summary>
            ContainsFileStream property class of Filegroup
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Filegroup.ReadOnly">
            <summary>
            ReadOnly property class of Filegroup
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Filegroup.ContainsMemoryOptimizedData">
            <summary>
            ContainsMemoryOptimizedData property class of Filegroup
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ForeignKeyConstraint">
            <summary>
            Model schema container class for ForeignKeyConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ForeignKeyConstraint.TypeClass">
            <summary>
            Type class for ForeignKeyConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ForeignKeyConstraint.Disabled">
            <summary>
            Disabled property class of ForeignKeyConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ForeignKeyConstraint.NotForReplication">
            <summary>
            NotForReplication property class of ForeignKeyConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ForeignKeyConstraint.DeleteAction">
            <summary>
            DeleteAction property class of ForeignKeyConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ForeignKeyConstraint.UpdateAction">
            <summary>
            UpdateAction property class of ForeignKeyConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ForeignKeyConstraint.Host">
            <summary>
            Host relationship class of ForeignKeyConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ForeignKeyConstraint.Columns">
            <summary>
            Columns relationship class of ForeignKeyConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ForeignKeyConstraint.ForeignColumns">
            <summary>
            ForeignColumns relationship class of ForeignKeyConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ForeignKeyConstraint.ForeignTable">
            <summary>
            ForeignTable relationship class of ForeignKeyConstraint
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.FullTextCatalog">
            <summary>
            Model schema container class for FullTextCatalog
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FullTextCatalog.TypeClass">
            <summary>
            Type class for FullTextCatalog
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FullTextCatalog.AccentSensitivity">
            <summary>
            AccentSensitivity property class of FullTextCatalog
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FullTextCatalog.IsDefault">
            <summary>
            IsDefault property class of FullTextCatalog
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FullTextCatalog.Path">
            <summary>
            Path property class of FullTextCatalog
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FullTextCatalog.Authorizer">
            <summary>
            Authorizer relationship class of FullTextCatalog
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FullTextCatalog.Filegroup">
            <summary>
            Filegroup relationship class of FullTextCatalog
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.FullTextIndex">
            <summary>
            Model schema container class for FullTextIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FullTextIndex.TypeClass">
            <summary>
            Type class for FullTextIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FullTextIndex.ChangeTracking">
            <summary>
            ChangeTracking property class of FullTextIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FullTextIndex.UseSystemStopList">
            <summary>
            UseSystemStopList property class of FullTextIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FullTextIndex.Disabled">
            <summary>
            Disabled property class of FullTextIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FullTextIndex.Replicated">
            <summary>
            Replicated property class of FullTextIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FullTextIndex.StopListOff">
            <summary>
            StopListOff property class of FullTextIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FullTextIndex.UniqueIndexName">
            <summary>
            UniqueIndexName relationship class of FullTextIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FullTextIndex.Catalog">
            <summary>
            Catalog relationship class of FullTextIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FullTextIndex.Columns">
            <summary>
            Columns relationship class of FullTextIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FullTextIndex.Filegroup">
            <summary>
            Filegroup relationship class of FullTextIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FullTextIndex.IndexedObject">
            <summary>
            IndexedObject relationship class of FullTextIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FullTextIndex.SearchPropertyList">
            <summary>
            SearchPropertyList relationship class of FullTextIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FullTextIndex.StopList">
            <summary>
            StopList relationship class of FullTextIndex
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.FullTextIndexColumnSpecifier">
            <summary>
            Model schema container class for FullTextIndexColumnSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FullTextIndexColumnSpecifier.TypeClass">
            <summary>
            Type class for FullTextIndexColumnSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FullTextIndexColumnSpecifier.PartOfStatisticalSemantics">
            <summary>
            PartOfStatisticalSemantics property class of FullTextIndexColumnSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FullTextIndexColumnSpecifier.LanguageId">
            <summary>
            LanguageId property class of FullTextIndexColumnSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FullTextIndexColumnSpecifier.Column">
            <summary>
            Column relationship class of FullTextIndexColumnSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FullTextIndexColumnSpecifier.TypeColumn">
            <summary>
            TypeColumn relationship class of FullTextIndexColumnSpecifier
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.FullTextStopList">
            <summary>
            Model schema container class for FullTextStopList
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FullTextStopList.TypeClass">
            <summary>
            Type class for FullTextStopList
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FullTextStopList.Authorizer">
            <summary>
            Authorizer relationship class of FullTextStopList
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.HttpProtocolSpecifier">
            <summary>
            Model schema container class for HttpProtocolSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.HttpProtocolSpecifier.TypeClass">
            <summary>
            Type class for HttpProtocolSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.HttpProtocolSpecifier.CompressionEnabled">
            <summary>
            CompressionEnabled property class of HttpProtocolSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.HttpProtocolSpecifier.ListeningOnAllNoneReservedSites">
            <summary>
            ListeningOnAllNoneReservedSites property class of HttpProtocolSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.HttpProtocolSpecifier.ListeningOnAllSites">
            <summary>
            ListeningOnAllSites property class of HttpProtocolSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.HttpProtocolSpecifier.AuthenticationMode">
            <summary>
            AuthenticationMode property class of HttpProtocolSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.HttpProtocolSpecifier.AuthenticationRealm">
            <summary>
            AuthenticationRealm property class of HttpProtocolSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.HttpProtocolSpecifier.ClearPort">
            <summary>
            ClearPort property class of HttpProtocolSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.HttpProtocolSpecifier.DefaultLogonDomain">
            <summary>
            DefaultLogonDomain property class of HttpProtocolSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.HttpProtocolSpecifier.Path">
            <summary>
            Path property class of HttpProtocolSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.HttpProtocolSpecifier.Ports">
            <summary>
            Ports property class of HttpProtocolSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.HttpProtocolSpecifier.SslPort">
            <summary>
            SslPort property class of HttpProtocolSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.HttpProtocolSpecifier.Website">
            <summary>
            Website property class of HttpProtocolSpecifier
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.LinkedServer">
            <summary>
            Model schema container class for LinkedServer
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.LinkedServer.TypeClass">
            <summary>
            Type class for LinkedServer
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.LinkedServer.CollationCompatible">
            <summary>
            CollationCompatible property class of LinkedServer
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.LinkedServer.DataAccess">
            <summary>
            DataAccess property class of LinkedServer
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.LinkedServer.LazySchemaValidationEnabled">
            <summary>
            LazySchemaValidationEnabled property class of LinkedServer
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.LinkedServer.RemoteProcTransactionPromotionEnabled">
            <summary>
            RemoteProcTransactionPromotionEnabled property class of LinkedServer
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.LinkedServer.RpcEnabled">
            <summary>
            RpcEnabled property class of LinkedServer
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.LinkedServer.RpcOutEnabled">
            <summary>
            RpcOutEnabled property class of LinkedServer
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.LinkedServer.ProviderName">
            <summary>
            ProviderName property class of LinkedServer
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.LinkedServer.Catalog">
            <summary>
            Catalog property class of LinkedServer
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.LinkedServer.CollationName">
            <summary>
            CollationName property class of LinkedServer
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.LinkedServer.ConnectTimeout">
            <summary>
            ConnectTimeout property class of LinkedServer
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.LinkedServer.DataSource">
            <summary>
            DataSource property class of LinkedServer
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.LinkedServer.IsDistributor">
            <summary>
            IsDistributor property class of LinkedServer
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.LinkedServer.IsPublisher">
            <summary>
            IsPublisher property class of LinkedServer
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.LinkedServer.IsSubscriber">
            <summary>
            IsSubscriber property class of LinkedServer
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.LinkedServer.Location">
            <summary>
            Location property class of LinkedServer
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.LinkedServer.ProductName">
            <summary>
            ProductName property class of LinkedServer
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.LinkedServer.ProviderString">
            <summary>
            ProviderString property class of LinkedServer
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.LinkedServer.QueryTimeout">
            <summary>
            QueryTimeout property class of LinkedServer
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.LinkedServer.UseRemoteCollation">
            <summary>
            UseRemoteCollation property class of LinkedServer
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.LinkedServerLogin">
            <summary>
            Model schema container class for LinkedServerLogin
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.LinkedServerLogin.TypeClass">
            <summary>
            Type class for LinkedServerLogin
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.LinkedServerLogin.UseSelf">
            <summary>
            UseSelf property class of LinkedServerLogin
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.LinkedServerLogin.LinkedServerLoginName">
            <summary>
            LinkedServerLoginName property class of LinkedServerLogin
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.LinkedServerLogin.LinkedServerPassword">
            <summary>
            LinkedServerPassword property class of LinkedServerLogin
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.LinkedServerLogin.LinkedServer">
            <summary>
            LinkedServer relationship class of LinkedServerLogin
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.LinkedServerLogin.LocalLogin">
            <summary>
            LocalLogin relationship class of LinkedServerLogin
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.Login">
            <summary>
            Model schema container class for Login
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Login.TypeClass">
            <summary>
            Type class for Login
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Login.CheckExpiration">
            <summary>
            CheckExpiration property class of Login
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Login.CheckPolicy">
            <summary>
            CheckPolicy property class of Login
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Login.Disabled">
            <summary>
            Disabled property class of Login
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Login.MappedToWindowsLogin">
            <summary>
            MappedToWindowsLogin property class of Login
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Login.PasswordHashed">
            <summary>
            PasswordHashed property class of Login
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Login.PasswordMustChange">
            <summary>
            PasswordMustChange property class of Login
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Login.DefaultDatabase">
            <summary>
            DefaultDatabase property class of Login
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Login.DefaultLanguage">
            <summary>
            DefaultLanguage property class of Login
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Login.EncryptionOption">
            <summary>
            EncryptionOption property class of Login
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Login.Password">
            <summary>
            Password property class of Login
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Login.Sid">
            <summary>
            Sid property class of Login
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Login.AsymmetricKey">
            <summary>
            AsymmetricKey relationship class of Login
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Login.Certificate">
            <summary>
            Certificate relationship class of Login
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Login.Credential">
            <summary>
            Credential relationship class of Login
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.MasterKey">
            <summary>
            Model schema container class for MasterKey
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.MasterKey.TypeClass">
            <summary>
            Type class for MasterKey
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.MasterKey.Password">
            <summary>
            Password property class of MasterKey
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.MessageType">
            <summary>
            Model schema container class for MessageType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.MessageType.TypeClass">
            <summary>
            Type class for MessageType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.MessageType.ValidationMethod">
            <summary>
            ValidationMethod property class of MessageType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.MessageType.Authorizer">
            <summary>
            Authorizer relationship class of MessageType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.MessageType.XmlSchemaCollection">
            <summary>
            XmlSchemaCollection relationship class of MessageType
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.PartitionFunction">
            <summary>
            Model schema container class for PartitionFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PartitionFunction.TypeClass">
            <summary>
            Type class for PartitionFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PartitionFunction.Range">
            <summary>
            Range property class of PartitionFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PartitionFunction.ParameterType">
            <summary>
            ParameterType relationship class of PartitionFunction
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PartitionFunction.BoundaryValues">
            <summary>
            BoundaryValues relationship class of PartitionFunction
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.PartitionScheme">
            <summary>
            Model schema container class for PartitionScheme
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PartitionScheme.TypeClass">
            <summary>
            Type class for PartitionScheme
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PartitionScheme.AllToOneFilegroup">
            <summary>
            AllToOneFilegroup property class of PartitionScheme
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PartitionScheme.Filegroups">
            <summary>
            Filegroups relationship class of PartitionScheme
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PartitionScheme.PartitionFunction">
            <summary>
            PartitionFunction relationship class of PartitionScheme
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.PartitionScheme.FilegroupsRelationship">
            <summary>
            Model schema container class for FilegroupsRelationship
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PartitionScheme.FilegroupsRelationship.RelationshipClass">
            <summary>
            Relationship class for FilegroupsRelationship
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PartitionScheme.FilegroupsRelationship.IsDefault">
            <summary>
            IsDefault property class of FilegroupsRelationship
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.PartitionValue">
            <summary>
            Model schema container class for PartitionValue
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PartitionValue.TypeClass">
            <summary>
            Type class for PartitionValue
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PartitionValue.Expression">
            <summary>
            Expression property class of PartitionValue
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PartitionValue.ExpressionDependencies">
            <summary>
            ExpressionDependencies relationship class of PartitionValue
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.Permission">
            <summary>
            Model schema container class for Permission
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Permission.TypeClass">
            <summary>
            Type class for Permission
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Permission.WithAllPrivileges">
            <summary>
            WithAllPrivileges property class of Permission
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Permission.WithGrantOption">
            <summary>
            WithGrantOption property class of Permission
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Permission.PermissionType">
            <summary>
            PermissionType property class of Permission
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Permission.PermissionAction">
            <summary>
            PermissionAction property class of Permission
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Permission.ExcludedColumns">
            <summary>
            ExcludedColumns relationship class of Permission
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Permission.Grantee">
            <summary>
            Grantee relationship class of Permission
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Permission.Grantor">
            <summary>
            Grantor relationship class of Permission
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Permission.RevokedGrantOptionColumns">
            <summary>
            RevokedGrantOptionColumns relationship class of Permission
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Permission.SecuredObject">
            <summary>
            SecuredObject relationship class of Permission
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.PrimaryKeyConstraint">
            <summary>
            Model schema container class for PrimaryKeyConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PrimaryKeyConstraint.TypeClass">
            <summary>
            Type class for PrimaryKeyConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PrimaryKeyConstraint.AllowPageLocks">
            <summary>
            AllowPageLocks property class of PrimaryKeyConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PrimaryKeyConstraint.AllowRowLocks">
            <summary>
            AllowRowLocks property class of PrimaryKeyConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PrimaryKeyConstraint.IgnoreDuplicateKey">
            <summary>
            IgnoreDuplicateKey property class of PrimaryKeyConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PrimaryKeyConstraint.RecomputeStatistics">
            <summary>
            RecomputeStatistics property class of PrimaryKeyConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PrimaryKeyConstraint.Clustered">
            <summary>
            Clustered property class of PrimaryKeyConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PrimaryKeyConstraint.Disabled">
            <summary>
            Disabled property class of PrimaryKeyConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PrimaryKeyConstraint.FileStreamNull">
            <summary>
            FileStreamNull property class of PrimaryKeyConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PrimaryKeyConstraint.WithPadIndex">
            <summary>
            WithPadIndex property class of PrimaryKeyConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PrimaryKeyConstraint.Hash">
            <summary>
            Hash property class of PrimaryKeyConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PrimaryKeyConstraint.BucketCount">
            <summary>
            BucketCount property class of PrimaryKeyConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PrimaryKeyConstraint.FillFactor">
            <summary>
            FillFactor property class of PrimaryKeyConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PrimaryKeyConstraint.Host">
            <summary>
            Host relationship class of PrimaryKeyConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PrimaryKeyConstraint.Columns">
            <summary>
            Columns relationship class of PrimaryKeyConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PrimaryKeyConstraint.DataCompressionOptions">
            <summary>
            DataCompressionOptions relationship class of PrimaryKeyConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PrimaryKeyConstraint.Filegroup">
            <summary>
            Filegroup relationship class of PrimaryKeyConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PrimaryKeyConstraint.FileStreamFilegroup">
            <summary>
            FileStreamFilegroup relationship class of PrimaryKeyConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PrimaryKeyConstraint.FileStreamPartitionScheme">
            <summary>
            FileStreamPartitionScheme relationship class of PrimaryKeyConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PrimaryKeyConstraint.PartitionColumn">
            <summary>
            PartitionColumn relationship class of PrimaryKeyConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PrimaryKeyConstraint.PartitionScheme">
            <summary>
            PartitionScheme relationship class of PrimaryKeyConstraint
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.PrimaryKeyConstraint.ColumnsRelationship">
            <summary>
            Model schema container class for ColumnsRelationship
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PrimaryKeyConstraint.ColumnsRelationship.RelationshipClass">
            <summary>
            Relationship class for ColumnsRelationship
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PrimaryKeyConstraint.ColumnsRelationship.Ascending">
            <summary>
            Ascending property class of ColumnsRelationship
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.Procedure">
            <summary>
            Model schema container class for Procedure
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Procedure.TypeClass">
            <summary>
            Type class for Procedure
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Procedure.AnsiNullsOn">
            <summary>
            AnsiNullsOn property class of Procedure
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Procedure.ExecuteAsCaller">
            <summary>
            ExecuteAsCaller property class of Procedure
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Procedure.WithEncryption">
            <summary>
            WithEncryption property class of Procedure
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Procedure.ForReplication">
            <summary>
            ForReplication property class of Procedure
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Procedure.ExecuteAsOwner">
            <summary>
            ExecuteAsOwner property class of Procedure
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Procedure.QuotedIdentifierOn">
            <summary>
            QuotedIdentifierOn property class of Procedure
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Procedure.WithRecompile">
            <summary>
            WithRecompile property class of Procedure
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Procedure.ExecuteAsSelf">
            <summary>
            ExecuteAsSelf property class of Procedure
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Procedure.WithNativeCompilation">
            <summary>
            WithNativeCompilation property class of Procedure
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Procedure.WithSchemaBinding">
            <summary>
            WithSchemaBinding property class of Procedure
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Procedure.ClassName">
            <summary>
            ClassName property class of Procedure
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Procedure.IsReplicated">
            <summary>
            IsReplicated property class of Procedure
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Procedure.MethodName">
            <summary>
            MethodName property class of Procedure
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Procedure.ParentProcedure">
            <summary>
            ParentProcedure relationship class of Procedure
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Procedure.Assembly">
            <summary>
            Assembly relationship class of Procedure
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Procedure.BodyDependencies">
            <summary>
            BodyDependencies relationship class of Procedure
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Procedure.Login">
            <summary>
            Login relationship class of Procedure
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Procedure.Parameters">
            <summary>
            Parameters relationship class of Procedure
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Procedure.Schema">
            <summary>
            Schema relationship class of Procedure
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Procedure.User">
            <summary>
            User relationship class of Procedure
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.Queue">
            <summary>
            Model schema container class for Queue
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Queue.TypeClass">
            <summary>
            Type class for Queue
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Queue.ActivationStatusOn">
            <summary>
            ActivationStatusOn property class of Queue
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Queue.ActivationExecuteAsCaller">
            <summary>
            ActivationExecuteAsCaller property class of Queue
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Queue.ActivationExecuteAsOwner">
            <summary>
            ActivationExecuteAsOwner property class of Queue
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Queue.PoisonMessageHandlingStatusOn">
            <summary>
            PoisonMessageHandlingStatusOn property class of Queue
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Queue.RetentionOn">
            <summary>
            RetentionOn property class of Queue
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Queue.ActivationExecuteAsSelf">
            <summary>
            ActivationExecuteAsSelf property class of Queue
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Queue.StatusOn">
            <summary>
            StatusOn property class of Queue
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Queue.ActivationMaxQueueReaders">
            <summary>
            ActivationMaxQueueReaders property class of Queue
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Queue.ActivationProcedure">
            <summary>
            ActivationProcedure relationship class of Queue
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Queue.Columns">
            <summary>
            Columns relationship class of Queue
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Queue.Filegroup">
            <summary>
            Filegroup relationship class of Queue
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Queue.Login">
            <summary>
            Login relationship class of Queue
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Queue.PartitionColumn">
            <summary>
            PartitionColumn relationship class of Queue
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Queue.PartitionScheme">
            <summary>
            PartitionScheme relationship class of Queue
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Queue.Schema">
            <summary>
            Schema relationship class of Queue
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Queue.User">
            <summary>
            User relationship class of Queue
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.QueueEventNotification">
            <summary>
            Model schema container class for QueueEventNotification
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.QueueEventNotification.TypeClass">
            <summary>
            Type class for QueueEventNotification
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.QueueEventNotification.WithFanIn">
            <summary>
            WithFanIn property class of QueueEventNotification
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.QueueEventNotification.BrokerService">
            <summary>
            BrokerService property class of QueueEventNotification
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.QueueEventNotification.BrokerInstanceSpecifier">
            <summary>
            BrokerInstanceSpecifier property class of QueueEventNotification
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.QueueEventNotification.EventGroup">
            <summary>
            EventGroup relationship class of QueueEventNotification
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.QueueEventNotification.EventType">
            <summary>
            EventType relationship class of QueueEventNotification
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.QueueEventNotification.Queue">
            <summary>
            Queue relationship class of QueueEventNotification
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.RemoteServiceBinding">
            <summary>
            Model schema container class for RemoteServiceBinding
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.RemoteServiceBinding.TypeClass">
            <summary>
            Type class for RemoteServiceBinding
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.RemoteServiceBinding.Anonymous">
            <summary>
            Anonymous property class of RemoteServiceBinding
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.RemoteServiceBinding.Service">
            <summary>
            Service property class of RemoteServiceBinding
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.RemoteServiceBinding.User">
            <summary>
            User relationship class of RemoteServiceBinding
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.RemoteServiceBinding.Authorizer">
            <summary>
            Authorizer relationship class of RemoteServiceBinding
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ResourceGovernor">
            <summary>
            Model schema container class for ResourceGovernor
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ResourceGovernor.TypeClass">
            <summary>
            Type class for ResourceGovernor
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ResourceGovernor.Enabled">
            <summary>
            Enabled property class of ResourceGovernor
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ResourceGovernor.ClassifierFunction">
            <summary>
            ClassifierFunction relationship class of ResourceGovernor
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ResourcePool">
            <summary>
            Model schema container class for ResourcePool
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ResourcePool.TypeClass">
            <summary>
            Type class for ResourcePool
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ResourcePool.CapCpuPercent">
            <summary>
            CapCpuPercent property class of ResourcePool
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ResourcePool.MaxCpuPercent">
            <summary>
            MaxCpuPercent property class of ResourcePool
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ResourcePool.MaxIopsPerVolume">
            <summary>
            MaxIopsPerVolume property class of ResourcePool
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ResourcePool.MaxMemoryPercent">
            <summary>
            MaxMemoryPercent property class of ResourcePool
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ResourcePool.MinCpuPercent">
            <summary>
            MinCpuPercent property class of ResourcePool
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ResourcePool.MinIopsPerVolume">
            <summary>
            MinIopsPerVolume property class of ResourcePool
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ResourcePool.MinMemoryPercent">
            <summary>
            MinMemoryPercent property class of ResourcePool
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.Role">
            <summary>
            Model schema container class for Role
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Role.TypeClass">
            <summary>
            Type class for Role
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Role.Authorizer">
            <summary>
            Authorizer relationship class of Role
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.RoleMembership">
            <summary>
            Model schema container class for RoleMembership
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.RoleMembership.TypeClass">
            <summary>
            Type class for RoleMembership
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.RoleMembership.Member">
            <summary>
            Member relationship class of RoleMembership
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.RoleMembership.Role">
            <summary>
            Role relationship class of RoleMembership
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.Route">
            <summary>
            Model schema container class for Route
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Route.TypeClass">
            <summary>
            Type class for Route
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Route.BrokerInstance">
            <summary>
            BrokerInstance property class of Route
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Route.ServiceName">
            <summary>
            ServiceName property class of Route
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Route.Address">
            <summary>
            Address property class of Route
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Route.Lifetime">
            <summary>
            Lifetime property class of Route
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Route.MirrorAddress">
            <summary>
            MirrorAddress property class of Route
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Route.Authorizer">
            <summary>
            Authorizer relationship class of Route
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.Rule">
            <summary>
            Model schema container class for Rule
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Rule.TypeClass">
            <summary>
            Type class for Rule
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Rule.Expression">
            <summary>
            Expression property class of Rule
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Rule.BoundObjects">
            <summary>
            BoundObjects relationship class of Rule
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Rule.Schema">
            <summary>
            Schema relationship class of Rule
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.Schema">
            <summary>
            Model schema container class for Schema
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Schema.TypeClass">
            <summary>
            Type class for Schema
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Schema.Authorizer">
            <summary>
            Authorizer relationship class of Schema
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.SearchProperty">
            <summary>
            Model schema container class for SearchProperty
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SearchProperty.TypeClass">
            <summary>
            Type class for SearchProperty
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SearchProperty.Description">
            <summary>
            Description property class of SearchProperty
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SearchProperty.Identifier">
            <summary>
            Identifier property class of SearchProperty
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SearchProperty.PropertySetGuid">
            <summary>
            PropertySetGuid property class of SearchProperty
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SearchProperty.SearchPropertyList">
            <summary>
            SearchPropertyList relationship class of SearchProperty
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.SearchPropertyList">
            <summary>
            Model schema container class for SearchPropertyList
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SearchPropertyList.TypeClass">
            <summary>
            Type class for SearchPropertyList
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SearchPropertyList.Authorizer">
            <summary>
            Authorizer relationship class of SearchPropertyList
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.SecurityPolicy">
            <summary>
            Model schema container class for SecurityPolicy
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SecurityPolicy.TypeClass">
            <summary>
            Type class for SecurityPolicy
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SecurityPolicy.Enabled">
            <summary>
            Enabled property class of SecurityPolicy
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SecurityPolicy.IsSchemaBound">
            <summary>
            IsSchemaBound property class of SecurityPolicy
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SecurityPolicy.NotForReplication">
            <summary>
            NotForReplication property class of SecurityPolicy
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SecurityPolicy.Predicates">
            <summary>
            Predicates relationship class of SecurityPolicy
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SecurityPolicy.Schema">
            <summary>
            Schema relationship class of SecurityPolicy
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.SecurityPredicate">
            <summary>
            Model schema container class for SecurityPredicate
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SecurityPredicate.TypeClass">
            <summary>
            Type class for SecurityPredicate
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SecurityPredicate.BodyScript">
            <summary>
            BodyScript property class of SecurityPredicate
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SecurityPredicate.Operation">
            <summary>
            Operation property class of SecurityPredicate
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SecurityPredicate.PredicateType">
            <summary>
            PredicateType property class of SecurityPredicate
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SecurityPredicate.BodyDependencies">
            <summary>
            BodyDependencies relationship class of SecurityPredicate
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SecurityPredicate.TargetObject">
            <summary>
            TargetObject relationship class of SecurityPredicate
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.Sequence">
            <summary>
            Model schema container class for Sequence
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Sequence.TypeClass">
            <summary>
            Type class for Sequence
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Sequence.NoMaxValue">
            <summary>
            NoMaxValue property class of Sequence
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Sequence.NoMinValue">
            <summary>
            NoMinValue property class of Sequence
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Sequence.IncrementValue">
            <summary>
            IncrementValue property class of Sequence
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Sequence.CacheSize">
            <summary>
            CacheSize property class of Sequence
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Sequence.IsCached">
            <summary>
            IsCached property class of Sequence
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Sequence.IsCycling">
            <summary>
            IsCycling property class of Sequence
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Sequence.MaxValue">
            <summary>
            MaxValue property class of Sequence
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Sequence.MinValue">
            <summary>
            MinValue property class of Sequence
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Sequence.StartValue">
            <summary>
            StartValue property class of Sequence
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Sequence.DataType">
            <summary>
            DataType relationship class of Sequence
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Sequence.Schema">
            <summary>
            Schema relationship class of Sequence
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ServerAudit">
            <summary>
            Model schema container class for ServerAudit
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerAudit.TypeClass">
            <summary>
            Type class for ServerAudit
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerAudit.Disabled">
            <summary>
            Disabled property class of ServerAudit
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerAudit.ReserveDiskSpace">
            <summary>
            ReserveDiskSpace property class of ServerAudit
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerAudit.UnlimitedFileSize">
            <summary>
            UnlimitedFileSize property class of ServerAudit
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerAudit.UnlimitedMaxRolloverFiles">
            <summary>
            UnlimitedMaxRolloverFiles property class of ServerAudit
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerAudit.OnFailure">
            <summary>
            OnFailure property class of ServerAudit
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerAudit.PredicateExpression">
            <summary>
            PredicateExpression property class of ServerAudit
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerAudit.AuditGuid">
            <summary>
            AuditGuid property class of ServerAudit
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerAudit.AuditTarget">
            <summary>
            AuditTarget property class of ServerAudit
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerAudit.FilePath">
            <summary>
            FilePath property class of ServerAudit
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerAudit.MaxFiles">
            <summary>
            MaxFiles property class of ServerAudit
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerAudit.MaxRolloverFiles">
            <summary>
            MaxRolloverFiles property class of ServerAudit
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerAudit.MaxSize">
            <summary>
            MaxSize property class of ServerAudit
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerAudit.MaxSizeUnit">
            <summary>
            MaxSizeUnit property class of ServerAudit
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerAudit.QueueDelay">
            <summary>
            QueueDelay property class of ServerAudit
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ServerAuditSpecification">
            <summary>
            Model schema container class for ServerAuditSpecification
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerAuditSpecification.TypeClass">
            <summary>
            Type class for ServerAuditSpecification
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerAuditSpecification.StateOn">
            <summary>
            StateOn property class of ServerAuditSpecification
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerAuditSpecification.AuditActionGroups">
            <summary>
            AuditActionGroups relationship class of ServerAuditSpecification
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerAuditSpecification.ServerAudit">
            <summary>
            ServerAudit relationship class of ServerAuditSpecification
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ServerDdlTrigger">
            <summary>
            Model schema container class for ServerDdlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerDdlTrigger.TypeClass">
            <summary>
            Type class for ServerDdlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerDdlTrigger.AnsiNullsOn">
            <summary>
            AnsiNullsOn property class of ServerDdlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerDdlTrigger.ExecuteAsCaller">
            <summary>
            ExecuteAsCaller property class of ServerDdlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerDdlTrigger.Disabled">
            <summary>
            Disabled property class of ServerDdlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerDdlTrigger.WithEncryption">
            <summary>
            WithEncryption property class of ServerDdlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerDdlTrigger.ExecuteAsOwner">
            <summary>
            ExecuteAsOwner property class of ServerDdlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerDdlTrigger.QuotedIdentifierOn">
            <summary>
            QuotedIdentifierOn property class of ServerDdlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerDdlTrigger.ExecuteAsSelf">
            <summary>
            ExecuteAsSelf property class of ServerDdlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerDdlTrigger.TriggerType">
            <summary>
            TriggerType property class of ServerDdlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerDdlTrigger.ClassName">
            <summary>
            ClassName property class of ServerDdlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerDdlTrigger.IsLogon">
            <summary>
            IsLogon property class of ServerDdlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerDdlTrigger.MethodName">
            <summary>
            MethodName property class of ServerDdlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerDdlTrigger.Assembly">
            <summary>
            Assembly relationship class of ServerDdlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerDdlTrigger.BodyDependencies">
            <summary>
            BodyDependencies relationship class of ServerDdlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerDdlTrigger.EventGroup">
            <summary>
            EventGroup relationship class of ServerDdlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerDdlTrigger.EventType">
            <summary>
            EventType relationship class of ServerDdlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerDdlTrigger.Login">
            <summary>
            Login relationship class of ServerDdlTrigger
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerDdlTrigger.User">
            <summary>
            User relationship class of ServerDdlTrigger
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ServerEventNotification">
            <summary>
            Model schema container class for ServerEventNotification
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerEventNotification.TypeClass">
            <summary>
            Type class for ServerEventNotification
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerEventNotification.WithFanIn">
            <summary>
            WithFanIn property class of ServerEventNotification
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerEventNotification.BrokerService">
            <summary>
            BrokerService property class of ServerEventNotification
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerEventNotification.BrokerInstanceSpecifier">
            <summary>
            BrokerInstanceSpecifier property class of ServerEventNotification
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerEventNotification.EventGroup">
            <summary>
            EventGroup relationship class of ServerEventNotification
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerEventNotification.EventType">
            <summary>
            EventType relationship class of ServerEventNotification
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ServerOptions">
            <summary>
            Model schema container class for ServerOptions
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerOptions.TypeClass">
            <summary>
            Type class for ServerOptions
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ServerRoleMembership">
            <summary>
            Model schema container class for ServerRoleMembership
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerRoleMembership.TypeClass">
            <summary>
            Type class for ServerRoleMembership
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerRoleMembership.Member">
            <summary>
            Member relationship class of ServerRoleMembership
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServerRoleMembership.Role">
            <summary>
            Role relationship class of ServerRoleMembership
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.Service">
            <summary>
            Model schema container class for Service
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Service.TypeClass">
            <summary>
            Type class for Service
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Service.UseDefaultContract">
            <summary>
            UseDefaultContract property class of Service
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Service.Authorizer">
            <summary>
            Authorizer relationship class of Service
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Service.Contracts">
            <summary>
            Contracts relationship class of Service
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Service.Queue">
            <summary>
            Queue relationship class of Service
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ServiceBrokerLanguageSpecifier">
            <summary>
            Model schema container class for ServiceBrokerLanguageSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServiceBrokerLanguageSpecifier.TypeClass">
            <summary>
            Type class for ServiceBrokerLanguageSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServiceBrokerLanguageSpecifier.WindowsAuthenticationMode">
            <summary>
            WindowsAuthenticationMode property class of ServiceBrokerLanguageSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServiceBrokerLanguageSpecifier.UseCertificateFirst">
            <summary>
            UseCertificateFirst property class of ServiceBrokerLanguageSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServiceBrokerLanguageSpecifier.MessageForwardingEnabled">
            <summary>
            MessageForwardingEnabled property class of ServiceBrokerLanguageSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServiceBrokerLanguageSpecifier.EncryptionAlgorithmPart1">
            <summary>
            EncryptionAlgorithmPart1 property class of ServiceBrokerLanguageSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServiceBrokerLanguageSpecifier.EncryptionAlgorithmPart2">
            <summary>
            EncryptionAlgorithmPart2 property class of ServiceBrokerLanguageSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServiceBrokerLanguageSpecifier.EncryptionMode">
            <summary>
            EncryptionMode property class of ServiceBrokerLanguageSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServiceBrokerLanguageSpecifier.MessageForwardSize">
            <summary>
            MessageForwardSize property class of ServiceBrokerLanguageSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ServiceBrokerLanguageSpecifier.AuthenticationCertificate">
            <summary>
            AuthenticationCertificate relationship class of ServiceBrokerLanguageSpecifier
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.Signature">
            <summary>
            Model schema container class for Signature
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Signature.TypeClass">
            <summary>
            Type class for Signature
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Signature.IsCounterSignature">
            <summary>
            IsCounterSignature property class of Signature
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Signature.EncryptionMechanism">
            <summary>
            EncryptionMechanism relationship class of Signature
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Signature.SignedObject">
            <summary>
            SignedObject relationship class of Signature
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.SignatureEncryptionMechanism">
            <summary>
            Model schema container class for SignatureEncryptionMechanism
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SignatureEncryptionMechanism.TypeClass">
            <summary>
            Type class for SignatureEncryptionMechanism
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SignatureEncryptionMechanism.Password">
            <summary>
            Password property class of SignatureEncryptionMechanism
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SignatureEncryptionMechanism.SignedBlob">
            <summary>
            SignedBlob property class of SignatureEncryptionMechanism
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SignatureEncryptionMechanism.AsymmetricKey">
            <summary>
            AsymmetricKey relationship class of SignatureEncryptionMechanism
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SignatureEncryptionMechanism.Certificate">
            <summary>
            Certificate relationship class of SignatureEncryptionMechanism
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.SoapLanguageSpecifier">
            <summary>
            Model schema container class for SoapLanguageSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SoapLanguageSpecifier.TypeClass">
            <summary>
            Type class for SoapLanguageSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SoapLanguageSpecifier.BatchesEnabled">
            <summary>
            BatchesEnabled property class of SoapLanguageSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SoapLanguageSpecifier.SessionsEnabled">
            <summary>
            SessionsEnabled property class of SoapLanguageSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SoapLanguageSpecifier.SessionTimeoutNever">
            <summary>
            SessionTimeoutNever property class of SoapLanguageSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SoapLanguageSpecifier.CharacterSet">
            <summary>
            CharacterSet property class of SoapLanguageSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SoapLanguageSpecifier.DatabaseName">
            <summary>
            DatabaseName property class of SoapLanguageSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SoapLanguageSpecifier.HeaderLimit">
            <summary>
            HeaderLimit property class of SoapLanguageSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SoapLanguageSpecifier.IsDefaultDatabase">
            <summary>
            IsDefaultDatabase property class of SoapLanguageSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SoapLanguageSpecifier.IsDefaultNamespace">
            <summary>
            IsDefaultNamespace property class of SoapLanguageSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SoapLanguageSpecifier.IsDefaultWsdlSpName">
            <summary>
            IsDefaultWsdlSpName property class of SoapLanguageSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SoapLanguageSpecifier.LoginType">
            <summary>
            LoginType property class of SoapLanguageSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SoapLanguageSpecifier.Namespace">
            <summary>
            Namespace property class of SoapLanguageSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SoapLanguageSpecifier.SchemaType">
            <summary>
            SchemaType property class of SoapLanguageSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SoapLanguageSpecifier.SessionTimeout">
            <summary>
            SessionTimeout property class of SoapLanguageSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SoapLanguageSpecifier.WsdlSpName">
            <summary>
            WsdlSpName property class of SoapLanguageSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SoapLanguageSpecifier.WebMethods">
            <summary>
            WebMethods relationship class of SoapLanguageSpecifier
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.SoapMethodSpecification">
            <summary>
            Model schema container class for SoapMethodSpecification
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SoapMethodSpecification.TypeClass">
            <summary>
            Type class for SoapMethodSpecification
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SoapMethodSpecification.SchemaType">
            <summary>
            SchemaType property class of SoapMethodSpecification
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SoapMethodSpecification.Format">
            <summary>
            Format property class of SoapMethodSpecification
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SoapMethodSpecification.WebMethodAlias">
            <summary>
            WebMethodAlias property class of SoapMethodSpecification
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SoapMethodSpecification.WebMethodNamespace">
            <summary>
            WebMethodNamespace property class of SoapMethodSpecification
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SoapMethodSpecification.RelatedMethod">
            <summary>
            RelatedMethod relationship class of SoapMethodSpecification
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.SpatialIndex">
            <summary>
            Model schema container class for SpatialIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SpatialIndex.TypeClass">
            <summary>
            Type class for SpatialIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SpatialIndex.AllowPageLocks">
            <summary>
            AllowPageLocks property class of SpatialIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SpatialIndex.AllowRowLocks">
            <summary>
            AllowRowLocks property class of SpatialIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SpatialIndex.IgnoreDuplicateKey">
            <summary>
            IgnoreDuplicateKey property class of SpatialIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SpatialIndex.RecomputeStatistics">
            <summary>
            RecomputeStatistics property class of SpatialIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SpatialIndex.GridLevel1Density">
            <summary>
            GridLevel1Density property class of SpatialIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SpatialIndex.GridLevel2Density">
            <summary>
            GridLevel2Density property class of SpatialIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SpatialIndex.GridLevel3Density">
            <summary>
            GridLevel3Density property class of SpatialIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SpatialIndex.GridLevel4Density">
            <summary>
            GridLevel4Density property class of SpatialIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SpatialIndex.Disabled">
            <summary>
            Disabled property class of SpatialIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SpatialIndex.WithPadIndex">
            <summary>
            WithPadIndex property class of SpatialIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SpatialIndex.CellsPerObject">
            <summary>
            CellsPerObject property class of SpatialIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SpatialIndex.DataCompression">
            <summary>
            DataCompression property class of SpatialIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SpatialIndex.FillFactor">
            <summary>
            FillFactor property class of SpatialIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SpatialIndex.Tessellation">
            <summary>
            Tessellation property class of SpatialIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SpatialIndex.XMax">
            <summary>
            XMax property class of SpatialIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SpatialIndex.XMin">
            <summary>
            XMin property class of SpatialIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SpatialIndex.YMax">
            <summary>
            YMax property class of SpatialIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SpatialIndex.YMin">
            <summary>
            YMin property class of SpatialIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SpatialIndex.Column">
            <summary>
            Column relationship class of SpatialIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SpatialIndex.Filegroup">
            <summary>
            Filegroup relationship class of SpatialIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SpatialIndex.IndexedObject">
            <summary>
            IndexedObject relationship class of SpatialIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SpatialIndex.PartitionColumn">
            <summary>
            PartitionColumn relationship class of SpatialIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SpatialIndex.PartitionScheme">
            <summary>
            PartitionScheme relationship class of SpatialIndex
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.Statistics">
            <summary>
            Model schema container class for Statistics
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Statistics.TypeClass">
            <summary>
            Type class for Statistics
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Statistics.StatsStream">
            <summary>
            StatsStream property class of Statistics
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Statistics.FilterPredicate">
            <summary>
            FilterPredicate property class of Statistics
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Statistics.Incremental">
            <summary>
            Incremental property class of Statistics
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Statistics.NoRecompute">
            <summary>
            NoRecompute property class of Statistics
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Statistics.SampleSize">
            <summary>
            SampleSize property class of Statistics
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Statistics.SamplingStyle">
            <summary>
            SamplingStyle property class of Statistics
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Statistics.OnObject">
            <summary>
            OnObject relationship class of Statistics
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Statistics.Columns">
            <summary>
            Columns relationship class of Statistics
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Statistics.ExpressionDependencies">
            <summary>
            ExpressionDependencies relationship class of Statistics
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.Parameter">
            <summary>
            Model schema container class for Parameter
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Parameter.TypeClass">
            <summary>
            Type class for Parameter
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Parameter.DefaultExpression">
            <summary>
            DefaultExpression property class of Parameter
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Parameter.ReadOnly">
            <summary>
            ReadOnly property class of Parameter
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Parameter.Varying">
            <summary>
            Varying property class of Parameter
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Parameter.Scale">
            <summary>
            Scale property class of Parameter
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Parameter.Precision">
            <summary>
            Precision property class of Parameter
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Parameter.Length">
            <summary>
            Length property class of Parameter
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Parameter.IsMax">
            <summary>
            IsMax property class of Parameter
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Parameter.XmlStyle">
            <summary>
            XmlStyle property class of Parameter
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Parameter.IsNullable">
            <summary>
            IsNullable property class of Parameter
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Parameter.IsOutput">
            <summary>
            IsOutput property class of Parameter
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Parameter.XmlSchemaCollection">
            <summary>
            XmlSchemaCollection relationship class of Parameter
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Parameter.DataType">
            <summary>
            DataType relationship class of Parameter
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.SymmetricKey">
            <summary>
            Model schema container class for SymmetricKey
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SymmetricKey.TypeClass">
            <summary>
            Type class for SymmetricKey
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SymmetricKey.Algorithm">
            <summary>
            Algorithm property class of SymmetricKey
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SymmetricKey.CreationDisposition">
            <summary>
            CreationDisposition property class of SymmetricKey
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SymmetricKey.IdentityValue">
            <summary>
            IdentityValue property class of SymmetricKey
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SymmetricKey.KeySource">
            <summary>
            KeySource property class of SymmetricKey
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SymmetricKey.ProviderKeyName">
            <summary>
            ProviderKeyName property class of SymmetricKey
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SymmetricKey.AsymmetricKeys">
            <summary>
            AsymmetricKeys relationship class of SymmetricKey
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SymmetricKey.Certificates">
            <summary>
            Certificates relationship class of SymmetricKey
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SymmetricKey.Passwords">
            <summary>
            Passwords relationship class of SymmetricKey
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SymmetricKey.SymmetricKeys">
            <summary>
            SymmetricKeys relationship class of SymmetricKey
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SymmetricKey.Authorizer">
            <summary>
            Authorizer relationship class of SymmetricKey
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SymmetricKey.Provider">
            <summary>
            Provider relationship class of SymmetricKey
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.SymmetricKeyPassword">
            <summary>
            Model schema container class for SymmetricKeyPassword
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SymmetricKeyPassword.TypeClass">
            <summary>
            Type class for SymmetricKeyPassword
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SymmetricKeyPassword.Password">
            <summary>
            Password property class of SymmetricKeyPassword
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.Synonym">
            <summary>
            Model schema container class for Synonym
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Synonym.TypeClass">
            <summary>
            Type class for Synonym
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Synonym.ForObjectName">
            <summary>
            ForObjectName property class of Synonym
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Synonym.ForObject">
            <summary>
            ForObject relationship class of Synonym
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Synonym.Schema">
            <summary>
            Schema relationship class of Synonym
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.Table">
            <summary>
            Model schema container class for Table
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Table.TypeClass">
            <summary>
            Type class for Table
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Table.AnsiNullsOn">
            <summary>
            AnsiNullsOn property class of Table
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Table.ChangeDataCaptureEnabled">
            <summary>
            ChangeDataCaptureEnabled property class of Table
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Table.ChangeTrackingEnabled">
            <summary>
            ChangeTrackingEnabled property class of Table
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Table.FileStreamNull">
            <summary>
            FileStreamNull property class of Table
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Table.LargeValueTypesOutOfRow">
            <summary>
            LargeValueTypesOutOfRow property class of Table
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Table.QuotedIdentifierOn">
            <summary>
            QuotedIdentifierOn property class of Table
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Table.TableLockOnBulkLoad">
            <summary>
            TableLockOnBulkLoad property class of Table
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Table.TrackColumnsUpdated">
            <summary>
            TrackColumnsUpdated property class of Table
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Table.VardecimalStorageFormatEnabled">
            <summary>
            VardecimalStorageFormatEnabled property class of Table
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Table.MemoryOptimized">
            <summary>
            MemoryOptimized property class of Table
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Table.RowCount">
            <summary>
            RowCount property class of Table
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Table.DataSize">
            <summary>
            DataSize property class of Table
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Table.IndexSize">
            <summary>
            IndexSize property class of Table
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Table.DataPages">
            <summary>
            DataPages property class of Table
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Table.UsedPages">
            <summary>
            UsedPages property class of Table
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Table.Durability">
            <summary>
            Durability property class of Table
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Table.IsAutoGeneratedHistoryTable">
            <summary>
            IsAutoGeneratedHistoryTable property class of Table
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Table.IsEdge">
            <summary>
            IsEdge property class of Table
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Table.IsNode">
            <summary>
            IsNode property class of Table
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Table.IsReplicated">
            <summary>
            IsReplicated property class of Table
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Table.LockEscalation">
            <summary>
            LockEscalation property class of Table
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Table.RemoteDataEnabled">
            <summary>
            RemoteDataEnabled property class of Table
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Table.RetentionUnit">
            <summary>
            RetentionUnit property class of Table
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Table.RetentionValue">
            <summary>
            RetentionValue property class of Table
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Table.TextInRowSize">
            <summary>
            TextInRowSize property class of Table
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Table.Columns">
            <summary>
            Columns relationship class of Table
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Table.DataCompressionOptions">
            <summary>
            DataCompressionOptions relationship class of Table
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Table.Filegroup">
            <summary>
            Filegroup relationship class of Table
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Table.FilegroupForTextImage">
            <summary>
            FilegroupForTextImage relationship class of Table
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Table.FileStreamFilegroup">
            <summary>
            FileStreamFilegroup relationship class of Table
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Table.FileStreamPartitionScheme">
            <summary>
            FileStreamPartitionScheme relationship class of Table
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Table.PartitionColumn">
            <summary>
            PartitionColumn relationship class of Table
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Table.PartitionScheme">
            <summary>
            PartitionScheme relationship class of Table
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Table.Schema">
            <summary>
            Schema relationship class of Table
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.Table.TemporalSystemVersioningHistoryTable">
            <summary>
            TemporalSystemVersioningHistoryTable relationship class of Table
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.FileTable">
            <summary>
            Model schema container class for FileTable
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FileTable.TypeClass">
            <summary>
            Type class for FileTable
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FileTable.AnsiNullsOn">
            <summary>
            AnsiNullsOn property class of FileTable
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FileTable.FileStreamNull">
            <summary>
            FileStreamNull property class of FileTable
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FileTable.QuotedIdentifierOn">
            <summary>
            QuotedIdentifierOn property class of FileTable
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FileTable.TableLockOnBulkLoad">
            <summary>
            TableLockOnBulkLoad property class of FileTable
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FileTable.FileTableNamespaceEnabled">
            <summary>
            FileTableNamespaceEnabled property class of FileTable
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FileTable.FileTableCollateFilename">
            <summary>
            FileTableCollateFilename property class of FileTable
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FileTable.FileTableDirectory">
            <summary>
            FileTableDirectory property class of FileTable
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FileTable.LockEscalation">
            <summary>
            LockEscalation property class of FileTable
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FileTable.Columns">
            <summary>
            Columns relationship class of FileTable
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FileTable.DataCompressionOptions">
            <summary>
            DataCompressionOptions relationship class of FileTable
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FileTable.Filegroup">
            <summary>
            Filegroup relationship class of FileTable
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FileTable.FileStreamFilegroup">
            <summary>
            FileStreamFilegroup relationship class of FileTable
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FileTable.FileStreamPartitionScheme">
            <summary>
            FileStreamPartitionScheme relationship class of FileTable
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FileTable.PartitionColumn">
            <summary>
            PartitionColumn relationship class of FileTable
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FileTable.PartitionScheme">
            <summary>
            PartitionScheme relationship class of FileTable
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.FileTable.Schema">
            <summary>
            Schema relationship class of FileTable
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.TableType">
            <summary>
            Model schema container class for TableType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableType.TypeClass">
            <summary>
            Type class for TableType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableType.MemoryOptimized">
            <summary>
            MemoryOptimized property class of TableType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableType.Columns">
            <summary>
            Columns relationship class of TableType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableType.Constraints">
            <summary>
            Constraints relationship class of TableType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableType.Indexes">
            <summary>
            Indexes relationship class of TableType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableType.Schema">
            <summary>
            Schema relationship class of TableType
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.TableTypeCheckConstraint">
            <summary>
            Model schema container class for TableTypeCheckConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypeCheckConstraint.TypeClass">
            <summary>
            Type class for TableTypeCheckConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypeCheckConstraint.Expression">
            <summary>
            Expression property class of TableTypeCheckConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypeCheckConstraint.ExpressionDependencies">
            <summary>
            ExpressionDependencies relationship class of TableTypeCheckConstraint
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.TableTypeColumn">
            <summary>
            Model schema container class for TableTypeColumn
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypeColumn.TypeClass">
            <summary>
            Type class for TableTypeColumn
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypeColumn.TableTypeColumnType">
            <summary>
            TableTypeColumnType metadata class of TableTypeColumn
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypeColumn.Collation">
            <summary>
            Collation property class of TableTypeColumn
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypeColumn.IdentityIncrement">
            <summary>
            IdentityIncrement property class of TableTypeColumn
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypeColumn.IdentitySeed">
            <summary>
            IdentitySeed property class of TableTypeColumn
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypeColumn.IsIdentity">
            <summary>
            IsIdentity property class of TableTypeColumn
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypeColumn.Nullable">
            <summary>
            Nullable property class of TableTypeColumn
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypeColumn.IsRowGuidCol">
            <summary>
            IsRowGuidCol property class of TableTypeColumn
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypeColumn.Expression">
            <summary>
            Expression property class of TableTypeColumn
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypeColumn.Persisted">
            <summary>
            Persisted property class of TableTypeColumn
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypeColumn.PersistedNullable">
            <summary>
            PersistedNullable property class of TableTypeColumn
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypeColumn.Scale">
            <summary>
            Scale property class of TableTypeColumn
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypeColumn.Precision">
            <summary>
            Precision property class of TableTypeColumn
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypeColumn.Length">
            <summary>
            Length property class of TableTypeColumn
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypeColumn.IsMax">
            <summary>
            IsMax property class of TableTypeColumn
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypeColumn.XmlStyle">
            <summary>
            XmlStyle property class of TableTypeColumn
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypeColumn.ExpressionDependencies">
            <summary>
            ExpressionDependencies relationship class of TableTypeColumn
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypeColumn.XmlSchemaCollection">
            <summary>
            XmlSchemaCollection relationship class of TableTypeColumn
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypeColumn.DataType">
            <summary>
            DataType relationship class of TableTypeColumn
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.TableTypeDefaultConstraint">
            <summary>
            Model schema container class for TableTypeDefaultConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypeDefaultConstraint.TypeClass">
            <summary>
            Type class for TableTypeDefaultConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypeDefaultConstraint.Expression">
            <summary>
            Expression property class of TableTypeDefaultConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypeDefaultConstraint.TargetColumn">
            <summary>
            TargetColumn relationship class of TableTypeDefaultConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypeDefaultConstraint.ExpressionDependencies">
            <summary>
            ExpressionDependencies relationship class of TableTypeDefaultConstraint
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.TableTypeIndex">
            <summary>
            Model schema container class for TableTypeIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypeIndex.TypeClass">
            <summary>
            Type class for TableTypeIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypeIndex.Hash">
            <summary>
            Hash property class of TableTypeIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypeIndex.BucketCount">
            <summary>
            BucketCount property class of TableTypeIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypeIndex.IsDisabled">
            <summary>
            IsDisabled property class of TableTypeIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypeIndex.IsUnique">
            <summary>
            IsUnique property class of TableTypeIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypeIndex.Columns">
            <summary>
            Columns relationship class of TableTypeIndex
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.TableTypePrimaryKeyConstraint">
            <summary>
            Model schema container class for TableTypePrimaryKeyConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypePrimaryKeyConstraint.TypeClass">
            <summary>
            Type class for TableTypePrimaryKeyConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypePrimaryKeyConstraint.IgnoreDuplicateKey">
            <summary>
            IgnoreDuplicateKey property class of TableTypePrimaryKeyConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypePrimaryKeyConstraint.Clustered">
            <summary>
            Clustered property class of TableTypePrimaryKeyConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypePrimaryKeyConstraint.Hash">
            <summary>
            Hash property class of TableTypePrimaryKeyConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypePrimaryKeyConstraint.BucketCount">
            <summary>
            BucketCount property class of TableTypePrimaryKeyConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypePrimaryKeyConstraint.Columns">
            <summary>
            Columns relationship class of TableTypePrimaryKeyConstraint
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.TableTypePrimaryKeyConstraint.ColumnsRelationship">
            <summary>
            Model schema container class for ColumnsRelationship
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypePrimaryKeyConstraint.ColumnsRelationship.RelationshipClass">
            <summary>
            Relationship class for ColumnsRelationship
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypePrimaryKeyConstraint.ColumnsRelationship.Ascending">
            <summary>
            Ascending property class of ColumnsRelationship
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.TableTypeUniqueConstraint">
            <summary>
            Model schema container class for TableTypeUniqueConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypeUniqueConstraint.TypeClass">
            <summary>
            Type class for TableTypeUniqueConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypeUniqueConstraint.IgnoreDuplicateKey">
            <summary>
            IgnoreDuplicateKey property class of TableTypeUniqueConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypeUniqueConstraint.Clustered">
            <summary>
            Clustered property class of TableTypeUniqueConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypeUniqueConstraint.Hash">
            <summary>
            Hash property class of TableTypeUniqueConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypeUniqueConstraint.BucketCount">
            <summary>
            BucketCount property class of TableTypeUniqueConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypeUniqueConstraint.Columns">
            <summary>
            Columns relationship class of TableTypeUniqueConstraint
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.TableTypeUniqueConstraint.ColumnsRelationship">
            <summary>
            Model schema container class for ColumnsRelationship
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypeUniqueConstraint.ColumnsRelationship.RelationshipClass">
            <summary>
            Relationship class for ColumnsRelationship
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TableTypeUniqueConstraint.ColumnsRelationship.Ascending">
            <summary>
            Ascending property class of ColumnsRelationship
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.TcpProtocolSpecifier">
            <summary>
            Model schema container class for TcpProtocolSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TcpProtocolSpecifier.TypeClass">
            <summary>
            Type class for TcpProtocolSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TcpProtocolSpecifier.ListeningOnAllIPs">
            <summary>
            ListeningOnAllIPs property class of TcpProtocolSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TcpProtocolSpecifier.ListenerIPv4">
            <summary>
            ListenerIPv4 property class of TcpProtocolSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TcpProtocolSpecifier.ListenerIPv6">
            <summary>
            ListenerIPv6 property class of TcpProtocolSpecifier
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TcpProtocolSpecifier.ListenerPort">
            <summary>
            ListenerPort property class of TcpProtocolSpecifier
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.UniqueConstraint">
            <summary>
            Model schema container class for UniqueConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.UniqueConstraint.TypeClass">
            <summary>
            Type class for UniqueConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.UniqueConstraint.AllowPageLocks">
            <summary>
            AllowPageLocks property class of UniqueConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.UniqueConstraint.AllowRowLocks">
            <summary>
            AllowRowLocks property class of UniqueConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.UniqueConstraint.IgnoreDuplicateKey">
            <summary>
            IgnoreDuplicateKey property class of UniqueConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.UniqueConstraint.RecomputeStatistics">
            <summary>
            RecomputeStatistics property class of UniqueConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.UniqueConstraint.Clustered">
            <summary>
            Clustered property class of UniqueConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.UniqueConstraint.Disabled">
            <summary>
            Disabled property class of UniqueConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.UniqueConstraint.FileStreamNull">
            <summary>
            FileStreamNull property class of UniqueConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.UniqueConstraint.WithPadIndex">
            <summary>
            WithPadIndex property class of UniqueConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.UniqueConstraint.Hash">
            <summary>
            Hash property class of UniqueConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.UniqueConstraint.BucketCount">
            <summary>
            BucketCount property class of UniqueConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.UniqueConstraint.FillFactor">
            <summary>
            FillFactor property class of UniqueConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.UniqueConstraint.Host">
            <summary>
            Host relationship class of UniqueConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.UniqueConstraint.Columns">
            <summary>
            Columns relationship class of UniqueConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.UniqueConstraint.DataCompressionOptions">
            <summary>
            DataCompressionOptions relationship class of UniqueConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.UniqueConstraint.Filegroup">
            <summary>
            Filegroup relationship class of UniqueConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.UniqueConstraint.FileStreamFilegroup">
            <summary>
            FileStreamFilegroup relationship class of UniqueConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.UniqueConstraint.FileStreamPartitionScheme">
            <summary>
            FileStreamPartitionScheme relationship class of UniqueConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.UniqueConstraint.PartitionColumn">
            <summary>
            PartitionColumn relationship class of UniqueConstraint
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.UniqueConstraint.PartitionScheme">
            <summary>
            PartitionScheme relationship class of UniqueConstraint
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.UniqueConstraint.ColumnsRelationship">
            <summary>
            Model schema container class for ColumnsRelationship
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.UniqueConstraint.ColumnsRelationship.RelationshipClass">
            <summary>
            Relationship class for ColumnsRelationship
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.UniqueConstraint.ColumnsRelationship.Ascending">
            <summary>
            Ascending property class of ColumnsRelationship
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.User">
            <summary>
            Model schema container class for User
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.User.TypeClass">
            <summary>
            Type class for User
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.User.WithoutLogin">
            <summary>
            WithoutLogin property class of User
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.User.AuthenticationType">
            <summary>
            AuthenticationType property class of User
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.User.DefaultLanguage">
            <summary>
            DefaultLanguage property class of User
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.User.Password">
            <summary>
            Password property class of User
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.User.Sid">
            <summary>
            Sid property class of User
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.User.UserType">
            <summary>
            UserType property class of User
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.User.AsymmetricKey">
            <summary>
            AsymmetricKey relationship class of User
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.User.Certificate">
            <summary>
            Certificate relationship class of User
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.User.DefaultSchema">
            <summary>
            DefaultSchema relationship class of User
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.User.Login">
            <summary>
            Login relationship class of User
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.UserDefinedServerRole">
            <summary>
            Model schema container class for UserDefinedServerRole
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.UserDefinedServerRole.TypeClass">
            <summary>
            Type class for UserDefinedServerRole
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.UserDefinedServerRole.Authorizer">
            <summary>
            Authorizer relationship class of UserDefinedServerRole
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.UserDefinedType">
            <summary>
            Model schema container class for UserDefinedType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.UserDefinedType.TypeClass">
            <summary>
            Type class for UserDefinedType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.UserDefinedType.ByteOrdered">
            <summary>
            ByteOrdered property class of UserDefinedType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.UserDefinedType.FixedLength">
            <summary>
            FixedLength property class of UserDefinedType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.UserDefinedType.ClassName">
            <summary>
            ClassName property class of UserDefinedType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.UserDefinedType.Format">
            <summary>
            Format property class of UserDefinedType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.UserDefinedType.MaxByteSize">
            <summary>
            MaxByteSize property class of UserDefinedType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.UserDefinedType.ValidationMethodName">
            <summary>
            ValidationMethodName property class of UserDefinedType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.UserDefinedType.Assembly">
            <summary>
            Assembly relationship class of UserDefinedType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.UserDefinedType.Methods">
            <summary>
            Methods relationship class of UserDefinedType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.UserDefinedType.Properties">
            <summary>
            Properties relationship class of UserDefinedType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.UserDefinedType.Schema">
            <summary>
            Schema relationship class of UserDefinedType
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.View">
            <summary>
            Model schema container class for View
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.View.TypeClass">
            <summary>
            Type class for View
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.View.AnsiNullsOn">
            <summary>
            AnsiNullsOn property class of View
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.View.WithEncryption">
            <summary>
            WithEncryption property class of View
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.View.WithViewMetadata">
            <summary>
            WithViewMetadata property class of View
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.View.QuotedIdentifierOn">
            <summary>
            QuotedIdentifierOn property class of View
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.View.Replicated">
            <summary>
            Replicated property class of View
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.View.WithSchemaBinding">
            <summary>
            WithSchemaBinding property class of View
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.View.WithCheckOption">
            <summary>
            WithCheckOption property class of View
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.View.SelectStatement">
            <summary>
            SelectStatement property class of View
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.View.BodyDependencies">
            <summary>
            BodyDependencies relationship class of View
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.View.Columns">
            <summary>
            Columns relationship class of View
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.View.Schema">
            <summary>
            Schema relationship class of View
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.WorkloadGroup">
            <summary>
            Model schema container class for WorkloadGroup
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.WorkloadGroup.TypeClass">
            <summary>
            Type class for WorkloadGroup
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.WorkloadGroup.GroupMaxRequests">
            <summary>
            GroupMaxRequests property class of WorkloadGroup
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.WorkloadGroup.Importance">
            <summary>
            Importance property class of WorkloadGroup
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.WorkloadGroup.MaxDop">
            <summary>
            MaxDop property class of WorkloadGroup
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.WorkloadGroup.RequestMaxCpuTimeSec">
            <summary>
            RequestMaxCpuTimeSec property class of WorkloadGroup
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.WorkloadGroup.RequestMaxMemoryGrantPercent">
            <summary>
            RequestMaxMemoryGrantPercent property class of WorkloadGroup
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.WorkloadGroup.RequestMemoryGrantTimeoutSec">
            <summary>
            RequestMemoryGrantTimeoutSec property class of WorkloadGroup
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.WorkloadGroup.ResourcePool">
            <summary>
            ResourcePool relationship class of WorkloadGroup
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.XmlIndex">
            <summary>
            Model schema container class for XmlIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.XmlIndex.TypeClass">
            <summary>
            Type class for XmlIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.XmlIndex.AllowPageLocks">
            <summary>
            AllowPageLocks property class of XmlIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.XmlIndex.AllowRowLocks">
            <summary>
            AllowRowLocks property class of XmlIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.XmlIndex.IgnoreDuplicateKey">
            <summary>
            IgnoreDuplicateKey property class of XmlIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.XmlIndex.RecomputeStatistics">
            <summary>
            RecomputeStatistics property class of XmlIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.XmlIndex.Disabled">
            <summary>
            Disabled property class of XmlIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.XmlIndex.WithPadIndex">
            <summary>
            WithPadIndex property class of XmlIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.XmlIndex.SecondaryXmlIndexType">
            <summary>
            SecondaryXmlIndexType property class of XmlIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.XmlIndex.FillFactor">
            <summary>
            FillFactor property class of XmlIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.XmlIndex.IsPrimary">
            <summary>
            IsPrimary property class of XmlIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.XmlIndex.PrimaryXmlIndex">
            <summary>
            PrimaryXmlIndex relationship class of XmlIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.XmlIndex.Column">
            <summary>
            Column relationship class of XmlIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.XmlIndex.IndexedObject">
            <summary>
            IndexedObject relationship class of XmlIndex
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.SelectiveXmlIndex">
            <summary>
            Model schema container class for SelectiveXmlIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SelectiveXmlIndex.TypeClass">
            <summary>
            Type class for SelectiveXmlIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SelectiveXmlIndex.Disabled">
            <summary>
            Disabled property class of SelectiveXmlIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SelectiveXmlIndex.WithPadIndex">
            <summary>
            WithPadIndex property class of SelectiveXmlIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SelectiveXmlIndex.AllowRowLocks">
            <summary>
            AllowRowLocks property class of SelectiveXmlIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SelectiveXmlIndex.AllowPageLocks">
            <summary>
            AllowPageLocks property class of SelectiveXmlIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SelectiveXmlIndex.IgnoreDuplicateKey">
            <summary>
            IgnoreDuplicateKey property class of SelectiveXmlIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SelectiveXmlIndex.RecomputeStatistics">
            <summary>
            RecomputeStatistics property class of SelectiveXmlIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SelectiveXmlIndex.FillFactor">
            <summary>
            FillFactor property class of SelectiveXmlIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SelectiveXmlIndex.IsPrimary">
            <summary>
            IsPrimary property class of SelectiveXmlIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SelectiveXmlIndex.PrimarySelectiveXmlIndex">
            <summary>
            PrimarySelectiveXmlIndex relationship class of SelectiveXmlIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SelectiveXmlIndex.PrimaryPromotedPath">
            <summary>
            PrimaryPromotedPath relationship class of SelectiveXmlIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SelectiveXmlIndex.Column">
            <summary>
            Column relationship class of SelectiveXmlIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SelectiveXmlIndex.IndexedObject">
            <summary>
            IndexedObject relationship class of SelectiveXmlIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SelectiveXmlIndex.PromotedPaths">
            <summary>
            PromotedPaths relationship class of SelectiveXmlIndex
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.SelectiveXmlIndex.XmlNamespaces">
            <summary>
            XmlNamespaces relationship class of SelectiveXmlIndex
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.XmlNamespace">
            <summary>
            Model schema container class for XmlNamespace
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.XmlNamespace.TypeClass">
            <summary>
            Type class for XmlNamespace
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.XmlNamespace.NamespaceUri">
            <summary>
            NamespaceUri property class of XmlNamespace
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.XmlNamespace.Prefix">
            <summary>
            Prefix property class of XmlNamespace
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.PromotedNodePathForXQueryType">
            <summary>
            Model schema container class for PromotedNodePathForXQueryType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PromotedNodePathForXQueryType.TypeClass">
            <summary>
            Type class for PromotedNodePathForXQueryType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PromotedNodePathForXQueryType.IsSingleton">
            <summary>
            IsSingleton property class of PromotedNodePathForXQueryType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PromotedNodePathForXQueryType.MaxLength">
            <summary>
            MaxLength property class of PromotedNodePathForXQueryType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PromotedNodePathForXQueryType.NodePath">
            <summary>
            NodePath property class of PromotedNodePathForXQueryType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PromotedNodePathForXQueryType.Type">
            <summary>
            Type property class of PromotedNodePathForXQueryType
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.PromotedNodePathForSqlType">
            <summary>
            Model schema container class for PromotedNodePathForSqlType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PromotedNodePathForSqlType.TypeClass">
            <summary>
            Type class for PromotedNodePathForSqlType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PromotedNodePathForSqlType.Scale">
            <summary>
            Scale property class of PromotedNodePathForSqlType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PromotedNodePathForSqlType.Precision">
            <summary>
            Precision property class of PromotedNodePathForSqlType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PromotedNodePathForSqlType.Length">
            <summary>
            Length property class of PromotedNodePathForSqlType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PromotedNodePathForSqlType.IsMax">
            <summary>
            IsMax property class of PromotedNodePathForSqlType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PromotedNodePathForSqlType.IsSingleton">
            <summary>
            IsSingleton property class of PromotedNodePathForSqlType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PromotedNodePathForSqlType.NodePath">
            <summary>
            NodePath property class of PromotedNodePathForSqlType
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.PromotedNodePathForSqlType.DataType">
            <summary>
            DataType relationship class of PromotedNodePathForSqlType
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.XmlSchemaCollection">
            <summary>
            Model schema container class for XmlSchemaCollection
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.XmlSchemaCollection.TypeClass">
            <summary>
            Type class for XmlSchemaCollection
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.XmlSchemaCollection.Expression">
            <summary>
            Expression property class of XmlSchemaCollection
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.XmlSchemaCollection.Schema">
            <summary>
            Schema relationship class of XmlSchemaCollection
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ModelTypeClass">
            <summary>
             The metadata class for <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/>s.
            </summary>
            <remarks>
            <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModelSchema"/> metadata classes provide access to the structure and instance data
            within a <c>TSqlModelSchema</c> instance.
            </remarks>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ModelTypeClass.Name">
            <summary>
            Type name.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ModelTypeClass.SupportedPlatforms">
            <summary>
            The <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlPlatforms"/> versions on which this type is supported.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ModelTypeClass.Properties">
            <summary>
            Properties for the type.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ModelTypeClass.Relationships">
            <summary>
            Relationships for the type.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ModelTypeClass.Metadata">
            <summary>
            Metadata properties for the type.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ObjectIdentifier">
             <summary>
            
             </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.ObjectIdentifier.#ctor(System.String[])">
            <summary>
            Creates a object identifier with a name.
            </summary>
            <param name="parts">The parts of the identifier</param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.ObjectIdentifier.#ctor(System.Collections.Generic.IList{System.String})">
            <summary>
            Creates a object identifier with a name.
            </summary>
            <param name="parts">The parts of the identifier</param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.ObjectIdentifier.#ctor(System.Collections.Generic.IEnumerable{System.String})">
            <summary>
            Creates a object identifier with a name.
            </summary>
            <param name="parts">The parts of the identifier</param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.ObjectIdentifier.#ctor(System.Collections.Generic.IList{System.String},System.Collections.Generic.IList{System.String})">
            <summary>
            Creates a object identifier with a name that includes external parts.
            </summary>
            <param name="externalParts">External reference parts - used in 3 or 4 part references to
            objects in other databases or servers </param>
            <param name="parts">The parts of the identifier</param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.ObjectIdentifier.ToString">
            <summary>
             Formats and escapes name parts into a single string
            </summary>
            <returns>escaped name.</returns>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ObjectIdentifier.Parts">
            <summary>
            Gets the parts of the identifier.
            </summary>
            <returns>The parts of the identifier.</returns>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ObjectIdentifier.HasName">
            <summary>
            Does this ObjectIdentifier have any <see cref="P:Microsoft.SqlServer.Dac.Model.ObjectIdentifier.Parts"/>
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ObjectIdentifier.ExternalParts">
            <summary>
            Gets the external reference parts.  Null if the identifier is not external.
            </summary>
            <returns>The external reference parts.</returns>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.ObjectIdentifier.HasExternalParts">
            <summary>
            Does this ObjectIdentifier have any <see cref="P:Microsoft.SqlServer.Dac.Model.ObjectIdentifier.ExternalParts"/>
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.RelationshipType">
            <summary>
            Relationship types.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.RelationshipType.Composing">
            <summary>
            A relationship where the child object cannot be created outside the parent's DDL create statement.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.RelationshipType.Hierarchical">
            <summary>
            A relationship where the child object can be created outside the parent's DDL create statement.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.RelationshipType.Peer">
            <summary>
            A relationship where the related object must be created outside the parent's DDL create statement.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.ScriptPropertyContext">
            <summary>
            Customized Context object for properties of type <see cref="T:Microsoft.Data.Tools.Schema.Sql.SchemaModel.SqlScriptProperty"/>.    
            </summary>
            <remarks>
            Returns the value of the script string.
            </remarks>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.SimpleModelPropertyContext">
            <summary>
            Default Property context for all properties.
            </summary>
            <remarks>
            Provides default implementation for property access through the public model.
            </remarks>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.SqlSchemaModelCreator.GetCollationToUse(System.String,Microsoft.Data.Tools.Schema.SchemaModel.SqlPlatforms)">
            <summary>
            Internal for test use only
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.SqlServerVersion">
            <summary>
            Specific SQL Server releases.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlServerVersion.Sql90">
             <summary>
            on-premises, version 9.0
             </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlServerVersion.Sql100">
            <summary>
            on-premises, version 10.0
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlServerVersion.SqlAzure">
            <summary>
            Azure
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlServerVersion.Sql110">
            <summary>
            on-premises, version 11.0
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlServerVersion.Sql120">
            <summary>
            on-premises, version 12.0
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlServerVersion.Sql130">
            <summary>
            on-premises, version 13.0
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.SqlServerVersion.Sql140">
            <summary>
            on-premises, version 14.0
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.TSqlModel">
            <summary>
            Represents a model of a SQL Server database schema.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlModel.LoadFromDacpac(System.IO.Stream,Microsoft.SqlServer.Dac.Model.ModelLoadOptions)">
            <summary>
            Loads a model from a <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> or <see cref="T:Microsoft.SqlServer.Dac.BacPackage"/>
            using the specified <paramref name="options"/> to configure what kind of storage to use, and whether to load a script-backed
            model or not.
            </summary>
            <param name="dacpacStream">A stream that contains the serialized dacpac.</param>
            <param name="options">
            The <see cref="T:Microsoft.SqlServer.Dac.Model.ModelLoadOptions"/> defining how the model should be loaded. For models to be analyzed in static code analysis,
            it's recommended that the <see cref="P:Microsoft.SqlServer.Dac.Model.ModelLoadOptions.LoadAsScriptBackedModel"/> be set to true. This is important since some
            rules may not work as expected unless this is true.
            </param>
            <exception cref="T:Microsoft.SqlServer.Dac.Model.DacModelException">
            If there are problems loading the package from the specified <paramref name="dacpacStream"/>. 
            This may occur if the package does not load correctly or if references required by
            the package are not found using the original path to the reference.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlModel.LoadFromDacpac(System.IO.Stream,Microsoft.SqlServer.Dac.Model.ModelLoadOptions,System.Threading.CancellationToken)">
            <summary>
            Loads a model from a <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> or <see cref="T:Microsoft.SqlServer.Dac.BacPackage"/>
            using the specified <paramref name="options"/> to configure what kind of storage to use, and whether to load a script-backed
            model or not.
            </summary>
            <param name="dacpacStream">A stream that contains the serialized dacpac.</param>
            <param name="options">
            The <see cref="T:Microsoft.SqlServer.Dac.Model.ModelLoadOptions"/> defining how the model should be loaded. For models to be analyzed in static code analysis,
            it's recommended that the <see cref="P:Microsoft.SqlServer.Dac.Model.ModelLoadOptions.LoadAsScriptBackedModel"/> be set to true. This is important since some
            rules may not work as expected unless this is true.
            </param>
            <param name="cancellationToken">A token used for cancelling model loading.</param>
            <exception cref="T:System.OperationCanceledException">When the load operation is canceled.</exception>
            <exception cref="T:Microsoft.SqlServer.Dac.Model.DacModelException">
            If there are problems loading the package from the specified <paramref name="dacpacStream"/>. 
            This may occur if the package does not load correctly or if references required by
            the package are not found using the original path to the reference.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlModel.LoadFromDacpac(System.String,Microsoft.SqlServer.Dac.Model.ModelLoadOptions,System.Threading.CancellationToken)">
            <summary>
            Loads a model from a <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> or <see cref="T:Microsoft.SqlServer.Dac.BacPackage"/>
            using the specified <paramref name="options"/> to configure what kind of storage to use, and whether to load a script-backed
            model or not.
            </summary>
            <param name="fileName">File path to package.</param> 
            <param name="options">
            The <see cref="T:Microsoft.SqlServer.Dac.Model.ModelLoadOptions"/> defining how the model should be loaded. For models to be analyzed in static code analysis,
            it's recommended that the <see cref="P:Microsoft.SqlServer.Dac.Model.ModelLoadOptions.LoadAsScriptBackedModel"/> be set to true. This is important since some
            rules may not work as expected unless this is true.
            </param>
            <param name="cancellationToken">A token used for cancelling model loading.</param>
            <exception cref="T:System.OperationCanceledException">When the load operation is canceled.</exception>
            <exception cref="T:Microsoft.SqlServer.Dac.Model.DacModelException">
            If there are problems loading the package from the specified <paramref name="fileName"/>. 
            This may occur if the package does not load correctly or if references required by
            the package are not found in either the same directory as the package, or using the original path
            to the reference.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlModel.LoadFromDacpac(System.String,Microsoft.SqlServer.Dac.Model.ModelLoadOptions)">
            <summary>
            Loads a model from a <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> or <see cref="T:Microsoft.SqlServer.Dac.BacPackage"/>
            using the specified <paramref name="options"/> to configure what kind of storage to use, and whether to load a script-backed
            model or not.
            </summary>
            <param name="fileName">File path to package.</param> 
            <param name="options">
            The <see cref="T:Microsoft.SqlServer.Dac.Model.ModelLoadOptions"/> defining how the model should be loaded. For models to be analyzed in static code analysis,
            it's recommended that the <see cref="P:Microsoft.SqlServer.Dac.Model.ModelLoadOptions.LoadAsScriptBackedModel"/> be set to true. This is important since some
            rules may not work as expected unless this is true.
            </param>
            <exception cref="T:Microsoft.SqlServer.Dac.Model.DacModelException">
            If there are problems loading the package from the specified <paramref name="fileName"/>. 
            This may occur if the package does not load correctly or if references required by
            the package are not found in either the same directory as the package, or using the original path
            to the reference.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlModel.LoadFromDatabase(System.String,Microsoft.SqlServer.Dac.Model.ModelExtractOptions,System.Nullable{System.Threading.CancellationToken})">
            <summary>
            Loads a model from a database using the specified <paramref name="options"/>.
            </summary>
            <param name="connectionString">A connection string specifying the database and catalog to load.</param>
            <param name="options">
            Optional <see cref="T:Microsoft.SqlServer.Dac.Model.ModelExtractOptions"/> instance used to specify options that affect the behavior of package extraction.
            For models to be analyzed in static code analysis, it's recommended that the 
            <see cref="P:Microsoft.SqlServer.Dac.Model.ModelExtractOptions.LoadAsScriptBackedModel"/> be set to true. This is important since some
            rules may not work as expected unless this is true.</param> 
            <param name="cancellationToken">Optional cancellation token used to cancel a load operation.</param>
            <exception cref="T:System.ArgumentNullException">If connectionString is null.</exception>
            <exception cref="T:System.ArgumentException">If connectionString is not a valid connection string
            or options.Storage is not a valid value of the enumerated type.</exception>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">
            If there are problems extracting the model from the specified database. 
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlModel.LoadFromDatabaseWithAuthProvider(System.String,Microsoft.SqlServer.Dac.IUniversalAuthProvider,Microsoft.SqlServer.Dac.Model.ModelExtractOptions,System.Nullable{System.Threading.CancellationToken})">
            <summary>
            Loads a model from a database using the specified <paramref name="options"/>.
            </summary>
            <param name="connectionString">A connection string specifying the database and catalog to load.</param>
            <param name="authProvider"> 
            Optional universal authentication provider used to authenticate a <see cref="T:System.Data.SqlClient.SqlConnection"/> when opening a connection.</param>
            <param name="options">
            Optional <see cref="T:Microsoft.SqlServer.Dac.Model.ModelExtractOptions"/> instance used to specify options that affect the behavior of package extraction.
            For models to be analyzed in static code analysis, it's recommended that the 
            <see cref="P:Microsoft.SqlServer.Dac.Model.ModelExtractOptions.LoadAsScriptBackedModel"/> be set to true. This is important since some
            rules may not work as expected unless this is true.</param> 
            <param name="cancellationToken">Optional cancellation token used to cancel a load operation.</param>
            <exception cref="T:System.ArgumentNullException">If connectionString is null.</exception>
            <exception cref="T:System.ArgumentException">If connectionString is not a valid connection string
            or options.Storage is not a valid value of the enumerated type.</exception>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">
            If there are problems extracting the model from the specified database. 
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlModel.LoadFromDatabase(System.String,System.Security.SecureString,Microsoft.SqlServer.Dac.Model.ModelExtractOptions,System.Nullable{System.Threading.CancellationToken})">
            <summary>
            Loads a model from a database using the specified <paramref name="options"/>.
            </summary>
            <param name="connectionString">A connection string specifying the database and catalog to load.</param>
            <param name="password">This password string used when connecting to the specified database.</param>
            <param name="options">
            Optional <see cref="T:Microsoft.SqlServer.Dac.Model.ModelExtractOptions"/> instance used to specify options that affect the behavior of package extraction.
            For models to be analyzed in static code analysis, it's recommended that the 
            <see cref="P:Microsoft.SqlServer.Dac.Model.ModelExtractOptions.LoadAsScriptBackedModel"/> be set to true. This is important since some
            rules may not work as expected unless this is true.</param> 
            <param name="cancellationToken">Optional cancellation token used to cancel a load operation.</param>
            <exception cref="T:System.ArgumentNullException">If connectionString is null.</exception>
            <exception cref="T:System.ArgumentException">If connectionString is not a valid connection string
            or options.Storage is not a valid value of the enumerated type.</exception>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">
            If there are problems extracting the model from the specified database. 
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlModel.#ctor(System.String)">
            <summary>
            Loads a model from a <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> or <see cref="T:Microsoft.SqlServer.Dac.BacPackage"/>.
            
            This is equivalent to calling <see cref="M:Microsoft.SqlServer.Dac.Model.TSqlModel.LoadFromDacpac(System.String,Microsoft.SqlServer.Dac.Model.ModelLoadOptions)"/> with default values.
            </summary>
            <param name="fileName">File path to package.</param> 
            <remarks>
            By default DacSchemaModelStorageType.Memory is used for the model storage format.
            The dacpac model will not be script-backed as the <see cref="P:Microsoft.SqlServer.Dac.Model.ModelLoadOptions.LoadAsScriptBackedModel"/> will be set to false.
            Using <see cref="M:Microsoft.SqlServer.Dac.Model.TSqlModel.LoadFromDacpac(System.String,Microsoft.SqlServer.Dac.Model.ModelLoadOptions)"/> with <see cref="P:Microsoft.SqlServer.Dac.Model.ModelLoadOptions.LoadAsScriptBackedModel"/>
            set to true is recommended if the model will be used by the <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService"/> for static code analysis.
            </remarks>
            <exception cref="T:Microsoft.SqlServer.Dac.Model.DacModelException">
            If there are problems loading the package from the specified <paramref name="fileName"/>. 
            This may occur if the package does not load correctly or if references required by
            the package are not found in either the same directory as the package, or using the original path
            to the reference.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlModel.#ctor(System.String,Microsoft.SqlServer.Dac.DacSchemaModelStorageType)">
            <summary>
            Loads a model from a <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> or <see cref="T:Microsoft.SqlServer.Dac.BacPackage"/>.
            
            This is equivalent to calling <see cref="M:Microsoft.SqlServer.Dac.Model.TSqlModel.LoadFromDacpac(System.String,Microsoft.SqlServer.Dac.Model.ModelLoadOptions)"/> with default values for
            everything except the <paramref name="modelStorageType"/>.
            </summary>
            <param name="fileName">File path to package.</param>
            <param name="modelStorageType">
            Backing storage type for package instance.
            </param>
            <remarks>
            The dacpac model will not be script-backed as the <see cref="P:Microsoft.SqlServer.Dac.Model.ModelLoadOptions.LoadAsScriptBackedModel"/> will be set to false.
            Using <see cref="M:Microsoft.SqlServer.Dac.Model.TSqlModel.LoadFromDacpac(System.String,Microsoft.SqlServer.Dac.Model.ModelLoadOptions)"/> with <see cref="P:Microsoft.SqlServer.Dac.Model.ModelLoadOptions.LoadAsScriptBackedModel"/>
            set to true is recommended if the model will be used by the <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService"/> for static code analysis.
            </remarks>
            <exception cref="T:Microsoft.SqlServer.Dac.Model.DacModelException">
            If there are problems loading the package from the specified <paramref name="fileName"/>. 
            This may occur if the package does not load correctly or if references required by
            the package are not found in either the same directory as the package, or using the original path
            to the reference.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlModel.#ctor(System.String,Microsoft.SqlServer.Dac.DacSchemaModelStorageType,System.Threading.CancellationToken)">
            <summary>
            Loads a model from a <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> or <see cref="T:Microsoft.SqlServer.Dac.BacPackage"/>.
            
            This is equivalent to calling <see cref="M:Microsoft.SqlServer.Dac.Model.TSqlModel.LoadFromDacpac(System.String,Microsoft.SqlServer.Dac.Model.ModelLoadOptions)"/> with default values for
            everything except the <paramref name="modelStorageType"/>.
            </summary>
            <param name="fileName">File path to package.</param>
            <param name="modelStorageType">
            Backing storage type for package instance.
            </param>
            <param name="cancellationToken">A token used for cancelling model loading.</param>
            <remarks>
            The dacpac model will not be script-backed as the <see cref="P:Microsoft.SqlServer.Dac.Model.ModelLoadOptions.LoadAsScriptBackedModel"/> will be set to false.
            Using <see cref="M:Microsoft.SqlServer.Dac.Model.TSqlModel.LoadFromDacpac(System.String,Microsoft.SqlServer.Dac.Model.ModelLoadOptions)"/> with <see cref="P:Microsoft.SqlServer.Dac.Model.ModelLoadOptions.LoadAsScriptBackedModel"/>
            set to true is recommended if the model will be used by the <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService"/> for static code analysis.
            </remarks>
            <exception cref="T:Microsoft.SqlServer.Dac.Model.DacModelException">
            If there are problems loading the package from the specified <paramref name="fileName"/>. 
            This may occur if the package does not load correctly or if references required by
            the package are not found in either the same directory as the package, or using the original path
            to the reference.
            </exception>
            <exception cref="T:System.OperationCanceledException">When the load operation is canceled.</exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlModel.#ctor(Microsoft.SqlServer.Dac.Model.SqlServerVersion,Microsoft.SqlServer.Dac.Model.TSqlModelOptions)">
            <summary>
            Creates an empty model that targets a specific <see cref="T:Microsoft.SqlServer.Dac.Model.SqlServerVersion"/>
            </summary>
            <param name="modelTargetVersion">The version of SQL Server to target</param>
            <param name="modelCreationOptions">Options defining model properties, 
            including the collation and how to store the model (in memory or file backed)
            </param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlModel.GetObjectService">
            <summary>
            Internal method - for testing and utility purposes only
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlModel.GetObject(Microsoft.SqlServer.Dac.Model.ModelTypeClass,Microsoft.SqlServer.Dac.Model.ObjectIdentifier,Microsoft.SqlServer.Dac.Model.DacQueryScopes)">
            <summary>
            Returns <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/>s  of the specified <paramref name="objectType" value="type"/> and <paramref name="id" value="identity"/>.
            Only top level <see cref="T:Microsoft.SqlServer.Dac.Model.ModelTypeClass"/> types are supported by this method - the <paramref name="objectType" value="type"/> parameter
            must be in the types returned from the <see cref="P:Microsoft.SqlServer.Dac.Model.TSqlModelSchema.TopLevelTypes"/> method or the call will fail.
            </summary>
            <param name="objectType">Type filter. Must be in the list of <see cref="T:Microsoft.SqlServer.Dac.Model.ModelTypeClass"/> types returned from
            the <see cref="P:Microsoft.SqlServer.Dac.Model.TSqlModelSchema.TopLevelTypes"/> method or the call will fail. </param>
            <param name="id">Unique identity of <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> to return.</param>
            <param name="queryScopes">Scope filter for queried objects.</param>
            <returns>Single TSqlObject or null.</returns>
            <exception cref="T:Microsoft.SqlServer.Dac.Model.DacModelException">
            If the supplied <paramref name="objectType"/> and <paramref name="id"/> result in multiple <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/>s,
            or if the <paramref name="objectType"/> is not a top level type.
            </exception>
            <exception cref="T:System.ArgumentNullException">
            If the supplied <paramref name="id"/> is null.
            </exception>
            <exception cref="T:System.ArgumentNullException">
            If the supplied <paramref name="objectType"/> is null.
            </exception>
            <exception cref="T:System.Runtime.Remoting.RemotingException">
            If communication with the <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObjectService"/> fails.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlModel.GetObjects(Microsoft.SqlServer.Dac.Model.DacQueryScopes,Microsoft.SqlServer.Dac.Model.ModelTypeClass[])">
            <summary>
            Returns all <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/>s matching the list of <paramref name="typeFilters"/>.
            Only top level <see cref="T:Microsoft.SqlServer.Dac.Model.ModelTypeClass"/> types are supported by this method - all types in the
            <paramref name="typeFilters" value="type"/> parameter
            must be present in the <see cref="P:Microsoft.SqlServer.Dac.Model.TSqlModelSchema.TopLevelTypes"/> or the call will fail.
            </summary>
            <param name="queryScopes">Scope filter for queried objects. Must be in the list of <see cref="T:Microsoft.SqlServer.Dac.Model.ModelTypeClass"/> types returned from
            the <see cref="P:Microsoft.SqlServer.Dac.Model.TSqlModelSchema.TopLevelTypes"/> method or the call will fail.</param>
            <param name="typeFilters">List of <see cref="T:Microsoft.SqlServer.Dac.Model.ModelTypeClass"/>s to return.</param>
            <returns>All <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/>s that match <paramref name="typeFilters"/>.</returns>
            <exception cref="T:Microsoft.SqlServer.Dac.Model.DacModelException">
            If any of the types in the <paramref name="typeFilters"/> parameter are not a top level type.
            </exception>
            <remarks>
            If no <paramref name="typeFilters"/> are supplied all <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/>s are returned.
            </remarks>
            <exception cref="T:System.Runtime.Remoting.RemotingException">
            If communication with the <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObjectService"/> fails.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlModel.GetObjects(Microsoft.SqlServer.Dac.Model.ModelTypeClass,Microsoft.SqlServer.Dac.Model.ObjectIdentifier,Microsoft.SqlServer.Dac.Model.DacQueryScopes)">
            <summary>
            Returns all <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/>s that match the <see cref="T:Microsoft.SqlServer.Dac.Model.ModelTypeClass"/> and <see cref="T:Microsoft.SqlServer.Dac.Model.ObjectIdentifier"/>.
            Only top level <see cref="T:Microsoft.SqlServer.Dac.Model.ModelTypeClass"/> types are supported by this method - the <paramref name="objectType" value="type"/> parameter
            must be in the types returned from the <see cref="P:Microsoft.SqlServer.Dac.Model.TSqlModelSchema.TopLevelTypes"/> method or the call will fail.
            </summary>
            <param name="objectType">Type Filter. Must be in the list of <see cref="T:Microsoft.SqlServer.Dac.Model.ModelTypeClass"/> types returned from
            the <see cref="P:Microsoft.SqlServer.Dac.Model.TSqlModelSchema.TopLevelTypes"/> method or the call will fail.</param>
            <param name="id">Identity of the <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/>s to return.</param>
            <param name="queryScopes">Scope filter for queried objects.</param>
            <returns>All <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/>s that match the <paramref name="objectType"/> and <paramref name="id"/>.</returns>
            <exception cref="T:Microsoft.SqlServer.Dac.Model.DacModelException">
            If the <paramref name="objectType"/> is not a top level type.
            </exception>
            <exception cref="T:System.ArgumentNullException">
            If the supplied <paramref name="id"/> is null.
            </exception>
            <exception cref="T:System.ArgumentNullException">
            If the supplied <paramref name="objectType"/> is null.
            </exception>
            <exception cref="T:System.Runtime.Remoting.RemotingException">
            If communication with the <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObjectService"/> fails.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlModel.GetObjects(System.String,Microsoft.SqlServer.Dac.Model.ModelTypeClass[])">
            <summary>
            Returns all <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/>s in a given <paramref name="sourceName"/> document filtered by <see cref="T:Microsoft.SqlServer.Dac.Model.ModelTypeClass"/>s
            specified by the <paramref name="typeFilters"/> parameter.
            </summary>
            <param name="sourceName">Name of the source document</param>
            <param name="typeFilters">Array of ModelTypeClass that the resulting <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> should be filtered on.</param>
            <returns>List of <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/>s</returns>
            <remarks>
            If no <paramref name="typeFilters"/> are supplied all <see cref="T:Microsoft.SqlServer.Dac.Model.ModelTypeClass"/>s are returned.
            </remarks>
            <exception cref="T:System.Runtime.Remoting.RemotingException">
            If communication with the <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObjectService"/> fails.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlModel.GetModelErrors">
            <summary>
            Returns all <see cref="T:Microsoft.SqlServer.Dac.Model.DacModelError"/>s that are present in the model.
            </summary>
            <remarks>
            Load the model with <see cref="P:Microsoft.SqlServer.Dac.Model.ModelLoadOptions.ThrowOnModelErrors"/> set to false to retrieve model errors.
            Refer <see cref="P:Microsoft.SqlServer.Dac.Model.ModelLoadOptions.ThrowOnModelErrors"/> for more information on model errors.
            </remarks>
            <exception cref="T:System.Runtime.Remoting.RemotingException">
            If communication with the <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObjectService"/> fails.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlModel.AddObjects(System.String)">
            <summary>
            Adds objects to the model based on the contents of a TSql Script string. 
            The script should consist of valid TSql DDL statements.
            
            Objects added using this method cannot be updated or deleted at a later point 
            as update/delete requires a script name to be specified when adding the objects. If this
            is a requirement use the <see cref="M:Microsoft.SqlServer.Dac.Model.TSqlModel.AddOrUpdateObjects(System.String,System.String,Microsoft.SqlServer.Dac.Model.TSqlObjectOptions)"/> 
            method instead.
            </summary>
            <param name="inputScript">Script containing TSql DDL statements</param>
            <exception cref="T:System.ArgumentNullException">
            If the supplied <paramref name="inputScript"/> is null.
            </exception>
            <exception cref="T:System.Runtime.Remoting.RemotingException">
            If communication with the <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObjectService"/> fails.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlModel.AddObjects(System.String,Microsoft.SqlServer.Dac.Model.TSqlObjectOptions)">
            <summary>
            Add Objects to the model based on the contents of a TSql Script string, 
            plus additional metadata defined by a <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObjectOptions"/> object
            The script should consist of valid TSql DDL statements. 
            
            Objects added using this method cannot be updated or deleted at a later point 
            as update/delete requires a script name to be specified when adding the objects. If this
            is a requirement use the <see cref="M:Microsoft.SqlServer.Dac.Model.TSqlModel.AddOrUpdateObjects(System.String,System.String,Microsoft.SqlServer.Dac.Model.TSqlObjectOptions)"/> 
            method instead.
            </summary>
            <param name="inputScript">Script containing TSql DDL statements</param>
            <param name="options">Options defining how to interpret the script</param>
            <exception cref="T:System.ArgumentNullException">
            If the supplied <paramref name="inputScript"/> is null.
            </exception>
            <exception cref="T:System.Runtime.Remoting.RemotingException">
            If communication with the <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObjectService"/> fails.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlModel.AddObjects(Microsoft.SqlServer.TransactSql.ScriptDom.TSqlScript)">
            <summary>
            Adds objects to the model based on the contents of a <see cref="T:Microsoft.SqlServer.TransactSql.ScriptDom.TSqlScript"/> object. 
            The script should be valid TSql with no parse errors. 
            
            Objects added using this method cannot be updated or deleted at a later point 
            as update/delete requires a script name to be specified when adding the objects. If this
            is a requirement use the <see cref="M:Microsoft.SqlServer.Dac.Model.TSqlModel.AddOrUpdateObjects(Microsoft.SqlServer.TransactSql.ScriptDom.TSqlScript,System.String,Microsoft.SqlServer.Dac.Model.TSqlObjectOptions)"/> 
            method instead.
            </summary>
            <param name="inputScript">The <see cref="T:Microsoft.SqlServer.TransactSql.ScriptDom.TSqlScript"/> to add</param>
            <exception cref="T:System.ArgumentNullException">
            If the supplied <paramref name="inputScript"/> is null.
            </exception>
            <exception cref="T:System.Runtime.Remoting.RemotingException">
            If communication with the <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObjectService"/> fails.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlModel.AddObjects(Microsoft.SqlServer.TransactSql.ScriptDom.TSqlScript,Microsoft.SqlServer.Dac.Model.TSqlObjectOptions)">
            <summary>
            Add Objects to the model based on the contents of a <see cref="T:Microsoft.SqlServer.TransactSql.ScriptDom.TSqlScript"/> object, 
            plus additional metadata defined by a <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObjectOptions"/> object
            The script should be valid TSql with no parse errors. 
            
            Objects added using this method cannot be updated or deleted at a later point 
            as update/delete requires a script name to be specified when adding the objects. If this
            is a requirement use the <see cref="M:Microsoft.SqlServer.Dac.Model.TSqlModel.AddOrUpdateObjects(Microsoft.SqlServer.TransactSql.ScriptDom.TSqlScript,System.String,Microsoft.SqlServer.Dac.Model.TSqlObjectOptions)"/> 
            method instead.
            </summary>
            <param name="inputScript">The <see cref="T:Microsoft.SqlServer.TransactSql.ScriptDom.TSqlScript"/> to add</param>
            <param name="options">Options defining how to interpret the script</param>
            <exception cref="T:System.ArgumentNullException">
            If the supplied <paramref name="inputScript"/> is null.
            </exception>
            <exception cref="T:System.Runtime.Remoting.RemotingException">
            If communication with the <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObjectService"/> fails.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlModel.AddOrUpdateObjects(System.String,System.String,Microsoft.SqlServer.Dac.Model.TSqlObjectOptions)">
            <summary>
            Adds or updates the objects defined for a specified <paramref name="sourceName"/> with the
            objects defined in the <paramref name="inputScript"/>. If any objects were previously added
            with the same <paramref name="sourceName"/> these will be completely replaced
            The object definitions are based on the contents of a TSql Script string 
            plus additional metadata defined by a <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObjectOptions"/> object
            The script should consist of valid TSql DDL statements. 
            </summary>
            <param name="inputScript">Script containing TSql DDL statements</param>
            <param name="sourceName">
            A name to identify the <paramref name="inputScript"/>, for example a 
            fileName such as "MyTable.sql" or simply an alias like "dbo.Table". 
            Scripts are cached and TSqlObjects are linked to the source name.
            Any future Update/Delete operations will remove all existing objects
            with the same script name and replace them with the new objects.
            </param>
            <param name="options">Options defining how to interpret the script</param>
            <exception cref="T:System.ArgumentNullException">
            If the supplied <paramref name="inputScript"/> is null.
            </exception>
            <exception cref="T:System.ArgumentException">
            If the supplied <paramref name="sourceName"/> is null or whitespace, or if it ends
            in ".xsd". 
            Note: source names ending in ".xsd" are currently not supported. These relate 
            to Xml Schema Collections and adding of these is currently not supported in the public API.
            </exception>
            <exception cref="T:System.Runtime.Remoting.RemotingException">
            If communication with the <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObjectService"/> fails.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlModel.AddOrUpdateObjects(Microsoft.SqlServer.TransactSql.ScriptDom.TSqlScript,System.String,Microsoft.SqlServer.Dac.Model.TSqlObjectOptions)">
            <summary>
            Adds or updates the objects defined for a specified <paramref name="sourceName"/> with the
            objects defined in the <paramref name="inputScript"/>. If any objects were previously added
            with the same <paramref name="sourceName"/> these will be completely replaced
            The object definitions are based on the contents of a <see cref="T:Microsoft.SqlServer.TransactSql.ScriptDom.TSqlScript"/> object
            plus additional metadata defined by a <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObjectOptions"/> object
            The script should consist of valid TSql DDL statements. 
            </summary>
            <param name="inputScript">Script containing TSql DDL statements</param>
            <param name="sourceName">
            A name to identify the <paramref name="inputScript"/>, for example a 
            fileName such as "MyTable.sql" or simply an alias like "dbo.Table". 
            Scripts are cached and TSqlObjects are linked to the source name.
            Any future Update/Delete operations will remove all existing objects
            with the same script name and replace them with the new objects.
            </param>
            <param name="options">Options defining how to interpret the script</param>
            <exception cref="T:System.ArgumentNullException">
            If the supplied <paramref name="inputScript"/> is null.
            </exception>
            <exception cref="T:System.ArgumentException">
            If the supplied <paramref name="sourceName"/> is null or whitespace, or if it ends
            in ".xsd". 
            Note: source names ending in ".xsd" are currently not supported. These relate 
            to Xml Schema Collections and adding of these is currently not supported in the public API.
            </exception>
            <exception cref="T:System.Runtime.Remoting.RemotingException">
            If communication with the <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObjectService"/> fails.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlModel.DeleteObjects(System.String)">
            <summary>
            Deletes any objects that were added to the model with the specified <paramref name="sourceName"/>.
            </summary>
            <param name="sourceName">
            A name to identify the source to be deleted, for example a 
            fileName such as "MyTable.sql" or simply an alias like "dbo.Table". 
            Scripts are cached and TSqlObjects are linked to the source name.
            </param>
            <exception cref="T:System.ArgumentException">
            If the supplied <paramref name="sourceName"/> is null or whitespace, or if it ends
            in ".xsd". 
            Note: source names ending in ".xsd" are currently not supported. These relate 
            to Xml Schema Collections and adding of these is currently not supported in the public API.
            </exception>
            <exception cref="T:System.Runtime.Remoting.RemotingException">
            If communication with the <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObjectService"/> fails.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlModel.ConvertToScriptedObject(Microsoft.SqlServer.Dac.Model.TSqlObject,System.String)">
            <summary>
            Converts a specific top-level object in the model into a scripted representation of itself.
            This is useful when starting from a database sourced model and the caller wishes to modify this
            object's contents.  
            </summary>
            <param name="tSqlObject">Object to convert. Must not be null</param>
            <param name="sourceName">Optional source name. If left null a default name will be generated
            for the object. This name can be found using <see cref="M:Microsoft.SqlServer.Dac.Model.TSqlObject.GetSourceInformation"/>'s 
            SourceName property.
            </param>
            <returns>New copy of the TSqlObject, which will now be script-backed.
            Or if the object was already script-backed, will simply return this object
            </returns>
            <exception cref="T:Microsoft.SqlServer.Dac.Model.DacModelException">
            Thrown if the object could not be scripted out, this class of object is never scriptable,
            or errors were found in the model during the script process
            </exception>
            <exception cref="T:System.ArgumentException">If the oject is null, or if whitespace is used for the source name</exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlModel.Validate">
            <summary>
            Validates the model and returns a list of messages with any errors/warnings.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlModel.CheckVersionCompatibility(Microsoft.SqlServer.Dac.Model.SqlServerVersion,System.Threading.CancellationToken)">
            <summary>
            Validates the model to determine whether it contains any elements that are not compatible with a target version of SQL Server or Azure SQL Database, 
            and returns any errors or warnings.
            </summary>
            <param name="targetVersion">The target sql version of the export</param>
            <param name="cancelToken">A token used for cancelling the model check.</param>
            <returns></returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlModel.CopyModelOptions">
            <summary>
            Copies the <see cref="T:Microsoft.SqlServer.Dac.Model.DatabaseOptions"/> for the model to a <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModelOptions"/> object.
            This is useful if you wish to duplicate the options for a model when creating a new model.
            </summary>
            <returns><see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModelOptions"/> with settings matching the database options of the 
            model</returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlModel.Dispose">
            <summary>
            Releases all resources used by the <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/> object.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModel.Version">
            <summary>
            The specific SQL Server release targeted by the model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModel.EngineVersion">
            <summary>
            The specific engine version targeted by the model.
            
            For On Premises platforms this will be consistent with the <see cref="T:Microsoft.SqlServer.Dac.Model.SqlServerVersion"/> - for instance
            <see cref="F:Microsoft.SqlServer.Dac.Model.SqlServerVersion.Sql90"/> will have an engine version of 9.
            
            For Microsoft Azure SQL Database the minimum valid version is 11, and the engine version will affect
            what features are supported in the model.  
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModel.IsScriptBacked">
            <summary>
            Is this a model that is backed by scripts? In this case objects in the 
            <see cref="F:Microsoft.SqlServer.Dac.Model.DacQueryScopes.UserDefined"/> scope will have source position information including 
            a source name and information. This is important for scenarios such as use of the 
            <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.CodeAnalysisService"/>. 
            
            Any empty <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/> created will be script-backed by default. Models loaded
            from a Dacpac will only be scipt backed if the <see cref="P:Microsoft.SqlServer.Dac.Model.ModelLoadOptions.LoadAsScriptBackedModel"/>
            option is enabled. Note that creating a script-backed model will take longer than using a standard model
            loaded from a Dacpac
            
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModel.DisplayServices">
            <summary>
            Gets the <see cref="P:Microsoft.SqlServer.Dac.Model.TSqlModel.DisplayServices"/> that support producing display properties for
            objects in the model.  
            </summary>
            <returns><see cref="P:Microsoft.SqlServer.Dac.Model.TSqlModel.DisplayServices"/></returns>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModel.CollationComparer">
            <summary>
            Comparer that can compare strings and <see cref="T:Microsoft.SqlServer.Dac.Model.ObjectIdentifier"/>s using the collation of this <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/>.
            This can be very useful when comparing objects in the model since comparisons will be consistent with the expected comparison
            results in SQL Server
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.TSqlModelOptions">
            <summary>
            Defines model wide options
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.#ctor">
            <summary>
            Constructs the TSqlModelOptions
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.#ctor(Microsoft.SqlServer.Dac.Model.TSqlModelOptions)">
            <summary>
            Constructs the TSqlModelOptions based on an existing options object
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.Copy(Microsoft.SqlServer.Dac.Model.TSqlModelOptions,Microsoft.SqlServer.Dac.Model.TSqlModelOptions)">
            <summary>
            Copies deployment options between objects.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.Collation">
            <summary>
            Specifies the Collation to use for the model. This is a 
            string such as "SQL_Latin1_General_CP1_CI_AS", which must
            be a valid SQL Server Collation Name
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.StorageType">
            <summary>
            Specifies the storage type - in memory or file backed. 
            Default value is <see cref="F:Microsoft.SqlServer.Dac.DacSchemaModelStorageType.Memory"/>
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.AllowSnapshotIsolation">
            <summary>
            Specifies the ALLOW_SNAPSHOT_ISOLATION database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.TransactionIsolationReadCommittedSnapshot">
            <summary>
            Specifies the READ_COMMITTED_SNAPSHOT database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.MemoryOptimizedElevateToSnapshot">
            <summary>
            Specifies the MEMORY_OPTIMIZED_ELEVATE_TO_SNAPSHOT database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.AnsiNullDefaultOn">
            <summary>
            Specifies the ANSI_NULL_DEFAULT database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.AnsiNullsOn">
            <summary>
            Specifies the ANSI_NULLS database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.AnsiPaddingOn">
            <summary>
            Specifies the ANSI_PADDING database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.AnsiWarningsOn">
            <summary>
            Specifies the ANSI_WARNINGS database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.ArithAbortOn">
            <summary>
            Specifies the ARITH_ABORT database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.AutoClose">
            <summary>
            Specifies the AUTO_CLOSE database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.AutoCreateStatistics">
            <summary>
            Specifies the AUTO_CREATE_STATISTICS database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.AutoCreateStatisticsIncremental">
            <summary>
            Specifies the AUTO_CREATE_STATISTICS INCREMENTAL database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.AutoShrink">
            <summary>
            Specifies the AUTO_SHRINK database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.AutoUpdateStatistics">
            <summary>
            Specifies the AUTO_UPDATE_STATISTICS database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.AutoUpdateStatisticsAsync">
            <summary>
            Specifies the AUTO_UPDATE_STATISTICS_ASYNC database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.ChangeTrackingAutoCleanup">
            <summary>
            Specifies the AUTO_CLEANUP database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.ChangeTrackingEnabled">
            <summary>
            Specifies the CHANGE_TRACKING database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.ChangeTrackingRetentionPeriod">
            <summary>
            Specifies the period of the CHANGE_RETENTION database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.ChangeTrackingRetentionUnit">
            <summary>
            Specifies the unit of the CHANGE_RETENTION database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.CompatibilityLevel">
            <summary>
            Specifies the COMPATIBILITY_LEVEL database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.ConcatNullYieldsNull">
            <summary>
            Specifies the CONCAT_NULL_YIELDS_NULL database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.Containment">
            <summary>
            Specifies the CONTAINMENT database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.CursorCloseOnCommit">
            <summary>
            Specifies the CURSOR_CLOSE_ON_COMMIT database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.CursorDefaultGlobalScope">
            <summary>
            Specifies the CURSOR_DEFAULT database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.DatabaseStateOffline">
            <summary>
            Specifies the ONLINE | OFFLINE database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.DateCorrelationOptimizationOn">
            <summary>
            Specifies the DATE_CORRELATION_OPTIMIZATION database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.DefaultFullTextLanguage">
            <summary>
            Specifies the DEFAULT_FULLTEXT_LANGUAGE database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.DefaultLanguage">
            <summary>
            Specifies the DEFAULT_LANGUAGE database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.DBChainingOn">
            <summary>
            Specifies the DB_CHAINING database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.DbScopedConfigLegacyCardinalityEstimation">
            <summary>
            Specifies the Database Scoped Configuration LEGACY_CARDINALITY_ESTIMATION option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.DbScopedConfigLegacyCardinalityEstimationSecondary">
            <summary>
            Specifies the Database Scoped Configuration LEGACY_CARDINALITY_ESTIMATION option for secondaries.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.DbScopedConfigMaxDOP">
            <summary>
            Specifies the Database Scoped Configuration MAXDOP option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.DbScopedConfigMaxDOPSecondary">
            <summary>
            Specifies the Database Scoped Configuration MAXDOP option for secondaries.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.DbScopedConfigParameterSniffing">
            <summary>
            Specifies the Database Scoped Configuration PARAMETER_SNIFFING option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.DbScopedConfigParameterSniffingSecondary">
            <summary>
            Specifies the Database Scoped Configuration PARAMETER_SNIFFING option for secondaries.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.DbScopedConfigQueryOptimizerHotfixes">
            <summary>
            Specifies the Database Scoped Configuration QUERY_OPTIMIZER_HOTFIXES option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.DbScopedConfigQueryOptimizerHotfixesSecondary">
            <summary>
            Specifies the Database Scoped Configuration QUERY_OPTIMIZER_HOTFIXES option for secondaries.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.FileStreamDirectoryName">
            <summary>
            Specifies the DIRECTORY_NAME database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.FullTextEnabled">
            <summary>
            Specifies the sp_fulltext_database database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.HonorBrokerPriority">
            <summary>
            Specifies the HONOR_BROKER_PRIORITY database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.NestedTriggersOn">
            <summary>
            Specifies the NESTED_TRIGGER database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.NonTransactedFileStreamAccess">
            <summary>
            Specifies the NON_TRANSACTED_ACCESS database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.NumericRoundAbortOn">
            <summary>
            Specifies the NUMERIC_ROUNDABORT database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.PageVerifyMode">
            <summary>
            Specifies the PAGE_VERIFY database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.ParameterizationOption">
            <summary>
            Specifies the PARAMETERIZATION database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.QueryStoreCaptureMode">
            <summary>
            Specifies the query capture mode of QUERY_STORE database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.QueryStoreDesiredState">
            <summary>
            Specifies the operation mode of QUERY_STORE database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.QueryStoreFlushInterval">
            <summary>
            Specifies the Flush_Interval_Seconds setting of the QUERY_STORE database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.QueryStoreIntervalLength">
            <summary>
            Specifies the Interval_Length_Minutes setting of the QUERY_STORE database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.QueryStoreMaxStorageSize">
            <summary>
            Specifies the Max_Storage_Size_MB setting of the QUERY_STORE database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.QueryStoreMaxPlansPerQuery">
            <summary>
            Specifies the Max_Plans_Per_Query setting of the QUERY_STORE database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.QueryStoreStaleQueryThreshold">
            <summary>
            Specifies the Stale_Query_Threshold_Days setting of the QUERY_STORE database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.QuotedIdentifierOn">
            <summary>
            Specifies the QUOTED_IDENTIFIER database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.ReadOnly">
            <summary>
            Specifies the READ_ONLY | READ_WRITE database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.RecoveryMode">
            <summary>
            Specifies the RECOVERY database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.DelayedDurabilityMode">
            <summary>
            Specifies the DELAYED_DURABILITY database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.RecursiveTriggersOn">
            <summary>
            Specifies the RECURSIVE_TRIGGERS database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.ServiceBrokerOption">
            <summary>
            Specifies the ENABLE_BROKER | DISABLE_BROKER | NEW_BROKER | ERROR_BROKER_CONVERSATIONS database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.EngineVersion">
            <summary>
            Specifies what engine version should be targeted by the model.
            For On Premises platforms this value will be ignored as the engine version is fixed based on the platform.
            For the <see cref="F:Microsoft.SqlServer.Dac.Model.SqlServerVersion.SqlAzure"/> platform this value will be set and used
            to specify what T-SQL language features are supported. 
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.SupplementalLoggingOn">
            <summary>
            Specifies the SUPPLEMENTAL_LOGGING database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.TargetRecoveryTimePeriod">
            <summary>
            Specifies the period of the TARGET_RECOVERY_TIME database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.TargetRecoveryTimeUnit">
            <summary>
            Specifies the unit of the TARGET_RECOVERY_TIME database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.TornPageProtectionOn">
            <summary>
            Specifies the TORN_PAGE_DETECTION database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.TransformNoiseWords">
            <summary>
            Specifies the TRANSFORM_NOISE_WORDS database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.Trustworthy">
            <summary>
            Specifies the TRUSTWORTHY database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.TwoDigitYearCutoff">
            <summary>
            Specifies the TWO_DIGIT_YEAR_CUTOFF database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.VardecimalStorageFormatOn">
            <summary>
            Specifies the sp_db_vardecimal_storage_format database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.UserAccessOption">
            <summary>
            Specifies the SINGLE_USER | RESTRICTED_USER | MULTI_USER database option.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelOptions.WithEncryption">
            <summary>
            Specifies the ENCRYPTION database option.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.TSqlModelSchema">
            <summary>
            Defines a schema for a relational TSQL database model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelSchema.TopLevelTypes">
            <summary>
            All top level types supported in the model. These are the only types that
            can be queried for via the <see cref="M:Microsoft.SqlServer.Dac.Model.TSqlModel.GetObject(Microsoft.SqlServer.Dac.Model.ModelTypeClass,Microsoft.SqlServer.Dac.Model.ObjectIdentifier,Microsoft.SqlServer.Dac.Model.DacQueryScopes)"/> and 
            <see cref="M:Microsoft.SqlServer.Dac.Model.TSqlModel.GetObjects(Microsoft.SqlServer.Dac.Model.DacQueryScopes,Microsoft.SqlServer.Dac.Model.ModelTypeClass[])"/> 
            API calls.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlModelSchema.AllTypes">
            <summary>
            All types supported in the model. This will include types that are cannot be queried for using
            the <see cref="M:Microsoft.SqlServer.Dac.Model.TSqlModel.GetObject(Microsoft.SqlServer.Dac.Model.ModelTypeClass,Microsoft.SqlServer.Dac.Model.ObjectIdentifier,Microsoft.SqlServer.Dac.Model.DacQueryScopes)"/> and 
            <see cref="M:Microsoft.SqlServer.Dac.Model.TSqlModel.GetObjects(Microsoft.SqlServer.Dac.Model.DacQueryScopes,Microsoft.SqlServer.Dac.Model.ModelTypeClass[])"/> 
            API calls.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.TSqlObject">
            <summary>
            Represents an instance of an object for a SQL Server database schema.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlObject.TryGetAst(Microsoft.SqlServer.TransactSql.ScriptDom.TSqlScript@)">
            <summary>
            Attempts to generate an AST for the object. AST generation is only supported for top-level objects, with certain
            objects such as the <see cref="T:Microsoft.SqlServer.Dac.Model.DatabaseOptions"/> and inline constraints not supporting AST generation even though
            they are top level types.
            
            The generated AST is a newly generated object that defines the information about this <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> and any objects
            that would be scripted together with it. For example a Table would also script out the Columns and inline constraint definitions of a Table. 
            This method can be used to copy object information from one model to another, or to script out information about
            objects in the model.
            </summary>
            <param name="objectAst">Returns the generated AST if the call succeeded.</param>
            <returns>True if AST generated. Otherwise false.</returns>
            <remarks>
            The Ast will not have information about the original source position, such as the original source name and original
            position in an input script.
            </remarks>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlObject.GetAst">
            <summary>
            Generates a new <see cref="T:Microsoft.SqlServer.TransactSql.ScriptDom.TSqlScript"/> representing the AST for the <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/>, if this is
            supported for the <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/>. AST generation is only supported for top-level objects, with certain
            objects such as the <see cref="T:Microsoft.SqlServer.Dac.Model.DatabaseOptions"/> and inline constraints not supporting AST generation even though
            they are top level types. If it's unknown whether the object is capable of being scripted
            then the <see cref="M:Microsoft.SqlServer.Dac.Model.TSqlObject.TryGetAst(Microsoft.SqlServer.TransactSql.ScriptDom.TSqlScript@)"/> method should be used instead.
            
            The generated AST is a newly generated object that defines the information about this <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> and any objects
            that would be scripted together with it. For example a Table would also script out the Columns and inline constraint definitions of a Table. 
            This method can be used to copy object information from one model to another, or to script out information about
            objects in the model.
            </summary>
            <remarks>
            The AST will not have information about the original source position, such as the original source name and original
            position in an input script.
            </remarks>
            <returns>The generated AST object.</returns>
            <exception cref="T:Microsoft.SqlServer.Dac.Model.DacModelException">
            If <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> is not a top level statement object or if it does not support AST generation (for example
            if it is a <see cref="T:Microsoft.SqlServer.Dac.Model.DatabaseOptions"/> or a constraint that was originally defined inline with a Table).
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlObject.TryGetScript(System.String@)">
            <summary>
            Attempts to generate a CREATE script from the objects AST. AST generation is only supported for top-level objects, with certain
            objects such as the <see cref="T:Microsoft.SqlServer.Dac.Model.DatabaseOptions"/> and inline constraints not supporting AST generation even though
            they are top level types. If it's unknown whether the object is capable of being scripted
            then the <see cref="M:Microsoft.SqlServer.Dac.Model.TSqlObject.TryGetAst(Microsoft.SqlServer.TransactSql.ScriptDom.TSqlScript@)"/> method should be used instead.
            </summary>
            <param name="objectScript">The DDL Creation script for the object </param>
            <returns>True if the DDL creation script was created.</returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlObject.GetScript">
            <summary>
            Generates a CREATE script from the objects AST. AST generation is only supported for top-level objects, with certain
            objects such as the <see cref="T:Microsoft.SqlServer.Dac.Model.DatabaseOptions"/> and inline constraints not supporting AST generation even though
            they are top level types. If it's unknown whether the object is capable of being scripted
            then the <see cref="M:Microsoft.SqlServer.Dac.Model.TSqlObject.TryGetAst(Microsoft.SqlServer.TransactSql.ScriptDom.TSqlScript@)"/> method should be used instead.
            </summary>
            <returns>DDL Creation script</returns>
            <exception cref="T:Microsoft.SqlServer.Dac.Model.DacModelException">
            If <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> is not a top level statement object or if it does not support script generation (for example
            if it is a <see cref="T:Microsoft.SqlServer.Dac.Model.DatabaseOptions"/> or a constraint that was originally defined inline with a Table).
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlObject.GetSourceFragment">
            <summary>
            Note: Internal only for now. Dacpacs and database-targeted models will not have any source fragment information. 
             
            Gets the <see cref="T:Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment"/> which defines the object - may be null. This is the fragment from the original source,
            with original source position information (if available). 
            
            This should not be used when copying the object to a different model or when doing any external 
            manipulation of the object - in those cases the <see cref="M:Microsoft.SqlServer.Dac.Model.TSqlObject.TryGetAst(Microsoft.SqlServer.TransactSql.ScriptDom.TSqlScript@)"/> method should be used to get a 
            self-contained AST describing this Object.
            </summary>
            <returns><see cref="T:Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment"/>, or null if this was not present</returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlObject.GetProperty``1(Microsoft.SqlServer.Dac.Model.ModelPropertyClass)">
            <summary>
            Returns the property value.
            </summary>
            <typeparam name="T">Property type.</typeparam>
            <param name="property">Property.</param>
            <returns>Property Value.</returns>
            <exception cref="T:Microsoft.SqlServer.Dac.Model.DacModelException">
            If <paramref name="property"/> does not exists on the object.
            </exception>
            <exception cref="T:System.InvalidCastException">
            If the property type cannot be cast to T.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlObject.GetProperty(Microsoft.SqlServer.Dac.Model.ModelPropertyClass)">
            <summary>
            Returns the property value.
            </summary>
            <param name="property">Property.</param>
            <returns>Property Value.</returns>
            <exception cref="T:Microsoft.SqlServer.Dac.Model.DacModelException">
            If <paramref name="property"/> does not exists on the object.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlObject.GetMetadata``1(Microsoft.SqlServer.Dac.Model.ModelMetadataClass)">
            <summary>
            Returns the metadata property value.
            </summary>
            <typeparam name="T">Metadata property type.</typeparam>
            <param name="metadata">Metadata property name.</param>
            <returns>Metadata property value.</returns>
            <exception cref="T:Microsoft.SqlServer.Dac.Model.DacModelException">
            If <paramref name="metadata"/> does not exists on the object.
            </exception>
            <exception cref="T:System.InvalidCastException">
            If the metadata property type cannot be cast to T.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlObject.GetMetadata(Microsoft.SqlServer.Dac.Model.ModelMetadataClass)">
            <summary>
            Returns the metadata property value.
            </summary>
            <param name="metadata">Metadata property name.</param>
            <returns>Metadata property value.</returns>
            <exception cref="T:Microsoft.SqlServer.Dac.Model.DacModelException">
            If <paramref name="metadata"/> does not exists on the object.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlObject.GetParent">
            <summary>
            Returns the parent <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/>, if it is within the
            <see cref="F:Microsoft.SqlServer.Dac.Model.DacQueryScopes.Default"/> scope and if there is only one <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/>
            that could be the parent for this object..
            </summary>
            <returns>Parent object others null.</returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlObject.GetParent(Microsoft.SqlServer.Dac.Model.DacQueryScopes)">
            <summary>
            Returns the parent <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/>, if it is within the
            specified <see cref="T:Microsoft.SqlServer.Dac.Model.DacQueryScopes"/> scope and if there is only one <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/>
            that could be the parent for this object.
            </summary>
            <param name="queryScopes"><see cref="T:Microsoft.SqlServer.Dac.Model.DacQueryScopes"/> defining the scope objects must exist in.</param>
            <returns>Parent object or else null.</returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlObject.GetChildren">
            <summary>
            Returns all <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> child objects within the <see cref="F:Microsoft.SqlServer.Dac.Model.DacQueryScopes.Default"/> scope.
            </summary>
            <returns>All children.</returns>
            <remarks>
            References to elements not in the <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/> are not returned.
            </remarks>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlObject.GetChildren(Microsoft.SqlServer.Dac.Model.DacQueryScopes)">
            <summary>
            Returns all <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> child objects within the specified
            <see cref="T:Microsoft.SqlServer.Dac.Model.DacQueryScopes"/> scope.
            </summary>
            <param name="queryScopes"><see cref="T:Microsoft.SqlServer.Dac.Model.DacQueryScopes"/> defining the scope objects must exist in.</param>
            <returns>All children.</returns>
            <remarks>
            References to elements not in the <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/> are not returned.
            </remarks>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlObject.GetReferenced">
            <summary>
            Gets all referenced objects within the <see cref="F:Microsoft.SqlServer.Dac.Model.DacQueryScopes.Default"/> scope
            </summary>
            <returns><see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/>s referenced by this object</returns>
            <remarks>
            References to elements not in the <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/> are not returned. Use <see cref="M:Microsoft.SqlServer.Dac.Model.TSqlObject.GetReferencedRelationshipInstances"/> for a listing
            of all possible referenced elements.
            </remarks>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlObject.GetReferenced(Microsoft.SqlServer.Dac.Model.DacQueryScopes)">
            <summary>
            Gets all referenced objects within a given <see cref="T:Microsoft.SqlServer.Dac.Model.DacQueryScopes"/> scope.
            </summary>
            <param name="queryScopes"><see cref="T:Microsoft.SqlServer.Dac.Model.DacQueryScopes"/> defining the scope objects must exist in.</param>
            <returns><see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/>s referenced by this object</returns>
            <remarks>
            References to elements not in the <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/> are not returned. Use <see cref="M:Microsoft.SqlServer.Dac.Model.TSqlObject.GetReferencedRelationshipInstances"/> for a listing
            of all possible referenced elements.
            </remarks>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlObject.GetReferenced(Microsoft.SqlServer.Dac.Model.ModelRelationshipClass)">
            <summary>
            Gets referenced objects for a given <see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipClass"/>,
            where objects are within the <see cref="F:Microsoft.SqlServer.Dac.Model.DacQueryScopes.Default"/> scope
            </summary>
            <param name="relationshipType"><see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipClass"/> defining the relationship class to query for</param>
            <returns><see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/>s referenced by this object for a given <see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipClass"/></returns>
            <remarks>
            References to elements not in the <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/> are not returned. Use <see cref="M:Microsoft.SqlServer.Dac.Model.TSqlObject.GetReferencedRelationshipInstances"/> for a listing
            of all possible referenced elements.
            </remarks>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlObject.GetReferenced(Microsoft.SqlServer.Dac.Model.ModelRelationshipClass,Microsoft.SqlServer.Dac.Model.DacQueryScopes)">
            <summary>
            Gets referenced objects for a given <see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipClass"/>,
            where objects are within a given <see cref="T:Microsoft.SqlServer.Dac.Model.DacQueryScopes"/> scope.
            </summary>
            <param name="relationshipType"><see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipClass"/> defining the relationship to query for</param>
            <param name="queryScopes"><see cref="T:Microsoft.SqlServer.Dac.Model.DacQueryScopes"/> defining the scope objects must exist in.</param>
            <returns><see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/>s referenced by this object for a given <see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipClass"/></returns>
            <remarks>
            References to elements not in the <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/> are not returned. Use <see cref="M:Microsoft.SqlServer.Dac.Model.TSqlObject.GetReferencedRelationshipInstances"/> for a listing
            of all possible referenced elements.
            </remarks>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlObject.GetReferencedRelationshipInstances">
            <summary>
            For each object referenced by this <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/>, returns the <see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance"/> defining
            the relationship data. This will include the referenced object if it exists, the <see cref="T:Microsoft.SqlServer.Dac.Model.ObjectIdentifier"/> used to identify the
            referenced object, and any properties specific to this relationship.
            Only objects within the <see cref="F:Microsoft.SqlServer.Dac.Model.DacExternalQueryScopes.Default"/> scope will be returned.
            </summary>
            <returns><see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance"/>s defining the relationships between this <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> and the objects
            referenced by it</returns>
            <remarks>
            The <see cref="P:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance.Object"/> field may be null if the element is not in the <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/>. In these cases the
            <see cref="P:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance.ObjectName"/> field can be used to query information about the referenced object
            </remarks>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlObject.GetReferencedRelationshipInstances(Microsoft.SqlServer.Dac.Model.DacQueryScopes)">
            <summary>
            For each object referenced by this <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/>, returns the <see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance"/> defining
            the relationship data. This will include the referenced object if it exists, the <see cref="T:Microsoft.SqlServer.Dac.Model.ObjectIdentifier"/> used to identify the
            referenced object, and any properties specific to this relationship.
            Only objects within the specified <see cref="T:Microsoft.SqlServer.Dac.Model.DacQueryScopes"/> scope will be returned.
            To return non-composite or system references the <see cref="M:Microsoft.SqlServer.Dac.Model.TSqlObject.GetReferencedRelationshipInstances(Microsoft.SqlServer.Dac.Model.DacExternalQueryScopes)"/> method should be called instead
            </summary>
            <param name="queryScopes"><see cref="T:Microsoft.SqlServer.Dac.Model.DacQueryScopes"/> defining the scope objects must exist in.</param>
            <returns><see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance"/>s defining the relationships between this <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> and the objects
            referenced by it</returns>
            <remarks>
            The <see cref="P:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance.Object"/> field may be null if the element is not in the <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/>. In these cases the
            <see cref="P:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance.ObjectName"/> field can be used to query information about the referenced object
            </remarks>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlObject.GetReferencedRelationshipInstances(Microsoft.SqlServer.Dac.Model.ModelRelationshipClass)">
            <summary>
            For objects referenced by this <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> with a specific <see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipClass"/>, 
            returns the <see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance"/> defining
            the relationship data. This will include the referenced object if it exists, the <see cref="T:Microsoft.SqlServer.Dac.Model.ObjectIdentifier"/> used to identify the
            referenced object, and any properties specific to this relationship.
            Only objects within the <see cref="F:Microsoft.SqlServer.Dac.Model.DacExternalQueryScopes.Default"/> scope will be returned.
            </summary>
            <param name="relationshipType"><see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipClass"/> defining the relationship class to query for</param>
            <returns><see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance"/>s defining the relationships between this <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> and the objects
            referenced by it</returns>
            <remarks>
            The <see cref="P:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance.Object"/> field may be null if the element is not in the <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/>. In these cases the
            <see cref="P:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance.ObjectName"/> field can be used to query information about the referenced object
            </remarks>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlObject.GetReferencedRelationshipInstances(Microsoft.SqlServer.Dac.Model.ModelRelationshipClass,Microsoft.SqlServer.Dac.Model.DacQueryScopes)">
            <summary>
            For objects referenced by this <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> with a specific <see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipClass"/>, 
            returns the <see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance"/> defining
            the relationship data. This will include the referenced object if it exists, the <see cref="T:Microsoft.SqlServer.Dac.Model.ObjectIdentifier"/> used to identify the
            referenced object, and any properties specific to this relationship.
            Only objects within the specified <see cref="T:Microsoft.SqlServer.Dac.Model.DacQueryScopes"/> scope will be returned.
            To return non-composite or system references the <see cref="M:Microsoft.SqlServer.Dac.Model.TSqlObject.GetReferencedRelationshipInstances(Microsoft.SqlServer.Dac.Model.DacExternalQueryScopes)"/> method should be called instead
            </summary>
            <param name="relationshipType"><see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipClass"/> defining the relationship class to query for</param>
            <param name="queryScopes"><see cref="T:Microsoft.SqlServer.Dac.Model.DacQueryScopes"/> defining the scope objects must exist in.</param>
            <returns><see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance"/>s defining the relationships between this <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> and the objects
            referenced by it</returns>
            <remarks>
            The <see cref="P:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance.Object"/> field may be null if the element is not in the <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/>. In these cases the
            <see cref="P:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance.ObjectName"/> field can be used to query information about the referenced object
            </remarks>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlObject.GetReferencedRelationshipInstances(Microsoft.SqlServer.Dac.Model.DacExternalQueryScopes)">
            <summary>
            For each object referenced by this <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/>, returns the <see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance"/> defining
            the relationship data. This will include the referenced object if it exists, the <see cref="T:Microsoft.SqlServer.Dac.Model.ObjectIdentifier"/> used to identify the
            referenced object, and any properties specific to this relationship.
            Only objects within the specified <see cref="T:Microsoft.SqlServer.Dac.Model.DacQueryScopes"/> scope will be returned.
            To return non-composite or system references the scope must be set to include externals. In addition, in this case only the
            <see cref="T:Microsoft.SqlServer.Dac.Model.ObjectIdentifier"/> of the referenced object will be returned
            </summary>
            <param name="queryScopes"><see cref="T:Microsoft.SqlServer.Dac.Model.DacExternalQueryScopes"/> defining the scope objects must exist in.</param>
            <returns><see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance"/>s defining the relationships between this <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> and the objects
            referenced by it</returns>
            <remarks>
            The <see cref="P:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance.Object"/> field may be null if the element is not in the <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/>. In these cases the
            <see cref="P:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance.ObjectName"/> field can be used to query information about the referenced object
            </remarks>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlObject.GetReferencedRelationshipInstances(Microsoft.SqlServer.Dac.Model.ModelRelationshipClass,Microsoft.SqlServer.Dac.Model.DacExternalQueryScopes)">
            <summary>
            For objects referenced by this <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> with a specific <see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipClass"/>, 
            returns the <see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance"/> defining
            the relationship data. This will include the referenced object if it exists, the <see cref="T:Microsoft.SqlServer.Dac.Model.ObjectIdentifier"/> used to identify the
            referenced object, and any properties specific to this relationship.
            Only objects within the specified <see cref="T:Microsoft.SqlServer.Dac.Model.DacExternalQueryScopes"/> scope will be returned.
            To return non-composite or system references the scope must be set to include externals. In addition, in this case only the
            <see cref="T:Microsoft.SqlServer.Dac.Model.ObjectIdentifier"/> of the referenced object will be returned
            </summary>
            <param name="relationshipType"><see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipClass"/> defining the relationship class to query for</param>
            <param name="queryScopes"><see cref="T:Microsoft.SqlServer.Dac.Model.DacExternalQueryScopes"/> defining the scope objects must exist in.</param>
            <returns><see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance"/>s defining the relationships between this <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> and the objects
            referenced by it</returns>
            <remarks>
            The <see cref="P:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance.Object"/> field may be null if the element is not in the <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/>. In these cases the
            <see cref="P:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance.ObjectName"/> field can be used to query information about the referenced object
            </remarks>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlObject.VerifyRelationshipOwner(Microsoft.SqlServer.Dac.Model.ModelRelationshipClass)">
            <summary>
            Verifies this object's class owns the relationship. Only valid for referenced relationships - referencing could be anything
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlObject.GetReferencing">
            <summary>
            Gets all referencing objects within the <see cref="F:Microsoft.SqlServer.Dac.Model.DacQueryScopes.Default"/> scope
            </summary>
            <returns><see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/>s referencing this object</returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlObject.GetReferencing(Microsoft.SqlServer.Dac.Model.DacQueryScopes)">
            <summary>
            Gets all referencing objects within a given <see cref="T:Microsoft.SqlServer.Dac.Model.DacQueryScopes"/> scope.
            </summary>
            <param name="queryScopes"><see cref="T:Microsoft.SqlServer.Dac.Model.DacQueryScopes"/> defining the scope objects must exist in.</param>
            <returns><see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/>s referencing this object</returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlObject.GetReferencing(Microsoft.SqlServer.Dac.Model.ModelRelationshipClass)">
            <summary>
            Gets referencing objects, 
            where the relationship is defined by a specific <see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipClass"/> 
            and where objects are within the <see cref="F:Microsoft.SqlServer.Dac.Model.DacQueryScopes.Default"/> scope
            </summary>
            <param name="relationshipType"><see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipClass"/> defining the relationship class to query for</param>
            <returns><see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/>s referencing this object for a given <see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipClass"/></returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlObject.GetReferencing(Microsoft.SqlServer.Dac.Model.ModelRelationshipClass,Microsoft.SqlServer.Dac.Model.DacQueryScopes)">
            <summary>
            Gets referencing objects, 
            where the relationship is defined by a specific <see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipClass"/> 
            and where objects are within a given <see cref="T:Microsoft.SqlServer.Dac.Model.DacQueryScopes"/> scope.
            </summary>
            <param name="relationshipType"><see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipClass"/> defining the relationship to query for</param>
            <param name="queryScopes"><see cref="T:Microsoft.SqlServer.Dac.Model.DacQueryScopes"/> defining the scope objects must exist in.</param>
            <returns><see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/>s referencing this object for a given <see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipClass"/></returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlObject.GetReferencingRelationshipInstances">
            <summary>
            For each object referencing this <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/>, returns the <see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance"/> defining
            the relationship data. 
            This will include the referencing object - definedby the <see cref="P:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance.FromObject"/> field, 
            and any properties specific to this relationship.
            Only objects within the specified <see cref="T:Microsoft.SqlServer.Dac.Model.DacQueryScopes"/> scope will be returned.
            </summary>
            <returns><see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance"/>s defining the relationships between this <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> and the objects
            referencing it</returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlObject.GetReferencingRelationshipInstances(Microsoft.SqlServer.Dac.Model.DacQueryScopes)">
            <summary>
            For each object referencing this <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/>, returns the <see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance"/> defining
            the relationship data. 
            This will include the referencing object - definedby the <see cref="P:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance.FromObject"/> field, 
            and any properties specific to this relationship.
            Only objects within the <see cref="F:Microsoft.SqlServer.Dac.Model.DacQueryScopes.Default"/> scope will be returned.
            </summary>
            <param name="queryScopes"><see cref="T:Microsoft.SqlServer.Dac.Model.DacQueryScopes"/> defining the scope objects must exist in.</param>
            <returns><see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance"/>s defining the relationships between this <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> and the objects
            referencing it</returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlObject.GetReferencingRelationshipInstances(Microsoft.SqlServer.Dac.Model.ModelRelationshipClass)">
            <summary>
            For each object referencing this <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> with a specific <see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipClass"/>,
            returns the <see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance"/> defining the relationship data. 
            This will include the referencing object - definedby the <see cref="P:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance.FromObject"/> field, 
            and any properties specific to this relationship.
            Only objects within the <see cref="F:Microsoft.SqlServer.Dac.Model.DacQueryScopes.Default"/> scope will be returned.
            </summary>
            <param name="relationshipType"><see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipClass"/> defining the relationship class to query for</param>
            <returns><see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance"/>s defining the relationships between this <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> and the objects
            referencing it
            </returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlObject.GetReferencingRelationshipInstances(Microsoft.SqlServer.Dac.Model.ModelRelationshipClass,Microsoft.SqlServer.Dac.Model.DacQueryScopes)">
            <summary>
            For each object referencing this <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> with a specific <see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipClass"/>,
            returns the <see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance"/> defining the relationship data. 
            This will include the referencing object - definedby the <see cref="P:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance.FromObject"/> field, 
            and any properties specific to this relationship.
            Only objects within the specified <see cref="T:Microsoft.SqlServer.Dac.Model.DacQueryScopes"/> scope will be returned.
            </summary>
            <param name="relationshipType"><see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipClass"/> defining the relationship class to query for</param>
            <param name="queryScopes"><see cref="T:Microsoft.SqlServer.Dac.Model.DacQueryScopes"/> defining the scope objects must exist in.</param>
            <returns><see cref="T:Microsoft.SqlServer.Dac.Model.ModelRelationshipInstance"/>s defining the relationships between this <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> and the objects
            referencing it
            </returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlObject.GetSourceInformation">
            <summary>
            Gets the <see cref="T:Microsoft.SqlServer.Dac.SourceInformation"/> for this object, if this is available
            </summary>
            <returns>
            If source information is available returns the <see cref="T:Microsoft.SqlServer.Dac.SourceInformation"/> specifying the name of the script 
            this object is found in, plus start line and column. These values may be null or -1 if no source position information is present
            </returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlObject.Equals(System.Object)">
            <summary>
            Checks if this <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> is equal to another <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> 
            </summary>
            <param name="obj">object to compare</param>
            <returns>true if they are equal</returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlObject.GetHashCode">
            <summary>
            Gets the Hashcode for this object
            </summary>
            <returns>int hashcode</returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Model.TSqlObject.UpdateContextObject(System.Object)">
            <summary>
            Internal method that updates the context object for the public <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/>
            wrapper. Should only be called if the original context object is no longer valid, for instance
            if it has been deleted from the model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlObject.Name">
            <summary>
            Identity of the object.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlObject.ObjectType">
            <summary>
            Type of the object.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlObject.Item(Microsoft.SqlServer.Dac.Model.ModelPropertyClass)">
            <summary>
            Returns the property value.
            </summary>
            <param name="property">Property.</param>
            <returns>Property value.</returns>
            <exception cref="T:Microsoft.SqlServer.Dac.Model.DacModelException">
            If <paramref name="property"/> does not exists on the object.
            </exception>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlObject.ContextObject">
            <summary>
            Returns the context object for this Sql Object
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.TSqlObjectOptions">
            <summary>
            Defines options to be used for specific TSqlObjects 
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlObjectOptions.QuotedIdentifier">
            <summary>
            Specifies if the QUOTED_IDENTIFIER setting for objects is on or off
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Model.TSqlObjectOptions.AnsiNulls">
            <summary>
            Specifies if the the ANSI_NULLS connection setting for objects is on or off
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Model.TSqlPlatforms">
            <summary>
            Specific SQL Server releases.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.TSqlPlatforms.Sql90">
             <summary>
            on-premises, version 9.0
             </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.TSqlPlatforms.Sql100">
            <summary>
            on-premises, version 10.0
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.TSqlPlatforms.SqlAzure">
            <summary>
            Microsoft Azure SQL Database, version 11
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.TSqlPlatforms.Sql110">
            <summary>
            on-premises, version 11.0
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.TSqlPlatforms.Sql120">
            <summary>
            on-premises, version 12.0
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.TSqlPlatforms.Sql130">
            <summary>
            on-premises, version 13.0
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.TSqlPlatforms.SqlAzureV12">
            <summary>
            Microsoft Azure SQL Database, version 12
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.TSqlPlatforms.Sql140">
            <summary>
            on-premises, version 14.0
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.TSqlPlatforms.OnPremises">
            <summary>
            All on-premises versions
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.TSqlPlatforms.Cloud">
            <summary>
            All cloud releases
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.Model.TSqlPlatforms.All">
            <summary>
            Combination of all SQL Server categories
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.PackageMetadata">
            <summary>
            Metadata information that describes a package.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.PackageMetadata.Name">
            <summary>
            Package name
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.PackageMetadata.Version">
            <summary>
            Package version
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.PackageMetadata.Description">
            <summary>
            Package description
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.PackageOptions">
            <summary>
            Defines advanced options and additional artifacts for package creation.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.PackageOptions.TreatWarningsAsErrors">
            <summary>
            Indicates whether warnings should be treated as errors during model validation 
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.PackageOptions.IgnoreValidationErrors">
            <summary>
            Indicates the list of errors that will be ignored during validation
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.PackageOptions.RefactorLogPath">
            <summary>
            Path to the file to be added as the refactor log content to the .dacpac
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.PackageOptions.DeploymentContributors">
            <summary>
            List of contributors that are required in order to deploy the .dacpac
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.PackageOptions.ContributorArguments">
            <summary>
            List of contributors that are required in order to deploy the .dacpac
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.PackageOptions.DeploymentContributorConfigurationStreams">
            <summary>
            List of contributors that are required in order to deploy the .dacpac
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.SourceInformation">
            <summary>
            Represents information about an item of interest in the model, 
            for example a <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblem"/>. 
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.SourceInformation.#ctor(System.String,System.Int32,System.Int32)">
            <summary>
            Initializes an instance of a <see cref="T:Microsoft.SqlServer.Dac.SourceInformation"/> object.
            </summary>
            <param name="sourceName">Name representing the source for the information</param>
            <param name="startLine">start line, if known. May be -1 or 0 if the position is not known.</param>
            <param name="startColumn">start column, if known. May be -1 or 0 if the position is not known.</param>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.SourceInformation.SourceName">
            <summary>
            Name representing the source for the information
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.SourceInformation.StartLine">
            <summary>
            The start line. May be -1 or 0 if the position is not known.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.SourceInformation.StartColumn">
            <summary>
            The start column. May be -1 or 0 if the position is not known.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.TSqlModelUtils">
            <summary>
            Provides utility methods for the public model APIs.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.TSqlModelUtils.TryGetFragmentForAnalysis(Microsoft.SqlServer.Dac.Model.TSqlObject,Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment@)">
            <summary>
            Tries to get the most suitable <see cref="T:Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment"/> for use during the rule analysis process.
            If the TSqlObject was originally built from a scripted source then the original source fragment will be returned.
            
            Otherwise a new AST will be generated from the <paramref name="tSqlObject"/>.
             
            This ensures that when reporting <see cref="T:Microsoft.SqlServer.Dac.CodeAnalysis.SqlRuleProblem"/>s the most accurate source information can be included
            in the error messages. 
            
            Note that a fragment will only be returned if this is
            supported for the <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/>. AST generation is only supported for top-level objects, with certain
            objects such as the <see cref="T:Microsoft.SqlServer.Dac.Model.DatabaseOptions"/> and inline constraints not supporting AST generation even though
            they are top level types.
            </summary>
            <param name="tSqlObject">The <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlObject"/> whose fragment is being requested</param>
            <param name="fragment">The <see cref="T:Microsoft.SqlServer.TransactSql.ScriptDom.TSqlFragment"/> for the <paramref name="tSqlObject"/>, if it is possible to
            get fragment information for the object</param>
            <returns>true if the fragment was obtained, false otherwise.</returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.TSqlModelUtils.CalculatePlatformCompatibility(Microsoft.SqlServer.Dac.Model.SqlServerVersion)">
            <summary>
            Maps from a <see cref="T:Microsoft.SqlServer.Dac.Model.SqlServerVersion"/> to the <see cref="T:Microsoft.SqlServer.Dac.Extensibility.TSqlPlatformCompatibility"/> enum that matches it. The
            platform compatibility can be used to filter out extensions that don't support that platform, for instance code analysis
            rules.
            </summary>
            <param name="version">A <see cref="T:Microsoft.SqlServer.Dac.Model.SqlServerVersion"/>, for example the version for a <see cref="T:Microsoft.SqlServer.Dac.Model.TSqlModel"/></param>
            <returns>
            <see cref="T:Microsoft.SqlServer.Dac.Extensibility.TSqlPlatformCompatibility"/> indicating the compatibility level required for extensions. If no specific 
            version was passed into the method then the default will be to use <see cref="F:Microsoft.SqlServer.Dac.Extensibility.TSqlPlatformCompatibility.All"/> so
            that all extensions are loaded. 
            </returns>
        </member>
        <member name="T:AssemblyRef">
            <summary>
            Sets public key string for friend assemblies.
            </summary>
        </member>
        <member name="F:AssemblyRef.ProductPublicKey">
            <summary>No signing</summary>
        </member>
    </members>
</doc>

tools\dbatools\bin\smo\Microsoft.SqlServer.Dac.xml

<?xml version="1.0"?>
<doc>
    <assembly>
        <name>Microsoft.SqlServer.Dac</name>
    </assembly>
    <members>
        <member name="T:Microsoft.SqlServer.Dac.BacPackage">
            <summary>
            Representation of the artifact that contains the definition and data of a data-tier application.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.BacPackage.Dispose">
            <summary>
            Release the resources held by this instance.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.BacPackage.Unpack(System.String)">
            <summary>
            Place the contents of this package into the directory specified by <paramref name="directoryPath"/>.
            </summary>
            <param name="directoryPath">
            Base directory in which to place the package contents.
            </param>
            <exception cref="T:System.ArgumentException">
            If <paramref name="directoryPath"/> is a null reference or empty string.
            </exception>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">
            If an error occurs while attempting to unpack the package.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.BacPackage.Load(System.String)">
            <summary>
            Load a package file specified by <paramref name="fileName"/>.
            </summary>
            <param name="fileName">
            Path to the package file.
            </param>
            <returns>
            <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> instance that represents the package loaded from the specified file.
            </returns>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">
            If there is a problem reading the package; or if the package contains exported data.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.BacPackage.Load(System.String,Microsoft.SqlServer.Dac.DacSchemaModelStorageType)">
            <summary>
            Load a package file specified by <paramref name="fileName"/>.
            </summary>
            <param name="fileName">
            Path to the package file.
            </param>
            <param name="modelStorageType">
            Backing storage type for package instance.
            </param>
            <returns>
            <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> instance that represents the package loaded from the specified file.
            </returns>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">
            If there is a problem reading the package; or if the package does not contain exported data.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.BacPackage.Load(System.IO.Stream)">
            <summary>
            Load a package from the specified <see cref="T:System.IO.Stream"/>.
            </summary>
            <param name="stream">
            Stream from which to read the package.
            </param>
            <returns>
            <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> instance that represents the package loaded from the specified file.
            </returns>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">
            If there is a problem reading the package; or if the package does not contain exported data.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.BacPackage.Load(System.IO.Stream,Microsoft.SqlServer.Dac.DacSchemaModelStorageType)">
            <summary>
            Load a package from the specified <see cref="T:System.IO.Stream"/>.
            </summary>
            <param name="stream">
            Stream from which to read the package.
            </param>
            <param name="modelStorageType">
            Backing storage type for package instance.
            </param>
            <returns>
            <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> instance that represents the package loaded from the specified file.
            </returns>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">
            If there is a problem reading the package; or if the package does not contain exported data.
            </exception>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.IUniversalAuthProvider">
            <summary>
            Implement this interface to create a string access token. This access token will be used to set 
            the <see cref="P:System.Data.SqlClient.SqlConnection.AccessToken"/> for any SqlConnection instances created when connecting to a database.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.IUniversalAuthProvider.GetValidAccessToken">
            <summary>
            Returns an valid access token.
            </summary>
            <returns>The access token to be used to set the AccessToken property of the SqlConnection.</returns>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.PublishResult">
            <summary>
            Contains the results of a publish or script operation. This will contain at least one of the <see cref="P:Microsoft.SqlServer.Dac.PublishResult.DeploymentReport"/>
            or <see cref="P:Microsoft.SqlServer.Dac.PublishResult.DatabaseScript"/> properties depending on what was requested in the <see cref="T:Microsoft.SqlServer.Dac.PublishOptions"/>
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.PublishResult.#ctor(System.String,System.String,System.String)">
            <summary>
            Constructs a <see cref="T:Microsoft.SqlServer.Dac.PublishResult"/> with the specified contents
            </summary>
            <param name="deployReport">set as the <see cref="P:Microsoft.SqlServer.Dac.PublishResult.DeploymentReport"/> to return</param>
            <param name="dbScript">set as the <see cref="P:Microsoft.SqlServer.Dac.PublishResult.DatabaseScript"/> to return</param>
            <param name="masterScript">set as the <see cref="P:Microsoft.SqlServer.Dac.PublishResult.MasterDbScript"/> to return</param>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.PublishResult.DeploymentReport">
            <summary>
            A Deployment Report, if one was requested.
            This report is a high-level summary of actions being performed during deployment.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.PublishResult.DatabaseScript">
            <summary>
            The DB-level deployment script, if one was requested.
            This script contains all operations that must be done against the database during deployment.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.PublishResult.MasterDbScript">
            <summary>
            The master database-level deployment script, if one was requested.
            This script is only created if Azure SQL DB is the target as USE statements are not supported on that platform.
            It contains all operations that must be done against the master database, for instance Create Database statements
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.PublishOptions">
            <summary>
            Configures options for what will be reported when performing certain operations from <see cref="T:Microsoft.SqlServer.Dac.DacServices"/>,
            in particular whether a DeployReport and/or DeployScript will be generated
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.PublishOptions.#ctor">
            <summary>
            Configures options for what will be reported when performing certain operations from <see cref="T:Microsoft.SqlServer.Dac.DacServices"/>,
            in particular whether a DeployReport and/or DeployScript will be generated
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.PublishOptions.GenerateDeploymentScript">
            <summary>
            Sets whether Deployment Script(s) should be generated during deploy.
            If true, a script to update the database will be generated, and a script to
            update Master may also be generated if the target is an Azure SQL DB and this
            database has not yet been created.
            </summary>
            <value>Defaults to true</value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.PublishOptions.GenerateDeploymentReport">
            <summary>
            Sets whether a Deployment Report should be generated during deploy.
            This report is a high-level summary of actions being performed during deployment.
            </summary>
            <value>Defaults to false</value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.PublishOptions.DatabaseScriptPath">
            <summary>
            Optional path to write the DB-level deployment script, if <see cref="P:Microsoft.SqlServer.Dac.PublishOptions.GenerateDeploymentScript"/> is true.
            This script contains all operations that must be done against the database during deployment.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.PublishOptions.MasterDbScriptPath">
            <summary>
            Optional path to write the master database-level deployment script, if <see cref="P:Microsoft.SqlServer.Dac.PublishOptions.GenerateDeploymentScript"/> is true.
            This script is only created if Azure SQL DB is the target as USE statements are not supported on that platform.
            It contains all operations that must be done against the master database, for instance Create Database statements
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.PublishOptions.DeployOptions">
            <summary>
            Optional <see cref="T:Microsoft.SqlServer.Dac.DacDeployOptions"/> to configure a range of deployment options. 
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.PublishOptions.CancelToken">
            <summary>
            Nullable <see cref="T:System.Threading.CancellationToken"/> to allow the caller to cancel a deployment
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.KeyVault.DacKeyVaultService">
            <summary>
            Provides a service for discovering and configuring a <see cref="T:Microsoft.SqlServer.Dac.KeyVault.KeyVaultAuthenticator"/> to handle key vault access requests.
            These requests will occur during deployment if an encrypted table is being altered. It also supports initialization of general 
            key vault support in an application
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.KeyVault.DacKeyVaultService.SetExtensionProperties(Microsoft.SqlServer.Dac.Extensibility.ExtensionProperties)">
            <summary>
            Internal for testing purposes only
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.KeyVault.DacKeyVaultService.SetDependencyManager(Microsoft.SqlServer.Dac.Extensibility.IDependencyManager)">
            <summary>
            Internal for testing purposes only.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.KeyVault.DacKeyVaultService.UpdateAuthInfo(Microsoft.SqlServer.Dac.KeyVault.KeyVaultAuthInfoBase)">
            <summary>
            Passes a <see cref="T:Microsoft.SqlServer.Dac.KeyVault.KeyVaultAuthInfoBase"/> object to the <see cref="T:Microsoft.SqlServer.Dac.KeyVault.KeyVaultAuthenticator"/>, to support scenarios
            where a user changes authentication method, for instance by logging into a different Azure account
            </summary>
            <param name="authInfo"></param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.KeyVault.DacKeyVaultService.InitializeAuthenticator">
            <summary>
            Gives the authenticator the opportunity to register with the core AlwaysEncrypted callstack. This is important
            in scenarios where Interactive authentication is being used and this is the global authenticator to be used in the application
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.KeyVault.DacKeyVaultService.Validate(System.Collections.Generic.IList{System.String},System.Threading.CancellationToken)">
            <summary>
            Callback function to validate the presence of AKV token for Column Master Key access
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.KeyVault.DacKeyVaultService.Instance">
            <summary>
            Singleton instance object for the <see cref="T:Microsoft.SqlServer.Dac.KeyVault.DacKeyVaultService"/>. 
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.KeyVault.DacKeyVaultService.DependencyManager">
            <summary>
            Get DependencyManager
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.KeyVault.DacKeyVaultService.Trace">
            <summary>
            Trace object to use for tracing
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.KeyVault.DacKeyVaultService.BlockifMissingAuthentication">
            <summary>
            Gives a way to set early failure if Azure Key Vault Provider is not setup.
            When this is true, deployment fails to start if there is no Provider defined
            contrary to default mode which lets the deployment go through and fails only when key is actually used.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.KeyVault.ClientAndSecretAuthInfo">
            <summary>
            Authentication info for client ID and Secret, which is commonly supported in command line scenarios.
            This can be obtained by using the Azure SDK to log into Azure and obtain this information.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.KeyVault.KeyVaultAuthInfoBase">
            <summary>
            Data class to define authentication info that can be passed to a <see cref="T:Microsoft.SqlServer.Dac.KeyVault.KeyVaultAuthenticator"/> when
            configuring 
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.KeyVault.ClientAndSecretAuthInfo.#ctor(System.String,System.String)">
            <summary>
            Constructor
            </summary>
            <param name="clientId">Must not be null or whitespace</param>
            <param name="secret">Must not be null</param>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.KeyVault.ClientAndSecretAuthInfo.ClientId">
            <summary>
            Client ID used to log in to Azure
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.KeyVault.ClientAndSecretAuthInfo.Secret">
            <summary>
            Secret that verifies the authentication to Azure
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.KeyVault.KeyVaultAuthenticator">
            <summary>
            Base class for any Azure Key Vault authentication provider. This is responsible for logging into Azure, obtaining
            access keys and returning to the caller. 
            Notes: Only one provider is allowed per process, with the first to register being the successful provider. In order to
            support <see cref="T:Microsoft.SqlServer.Dac.DacServices"/> and related APIs being used in multiple UI tools and the SqlPackage command line the
            binding to Azure Authentication DLLs is loosely coupled to the core Dac Framework using MEF. A default provider is available
            for use in SqlPackage and other command line scenarios, supporting basic credential based authentication. This can be 
            overridden in order to integrate with custom authentication pipelines or into your UI application by extending this method
            and providing an <see cref="T:Microsoft.SqlServer.Dac.Extensibility.ExportableAttribute"/> with typeof(KeyVaultAuthenticator), a unique ID and high priority
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.KeyVault.KeyVaultAuthenticator.GetToken(System.String,System.String,System.String)">
            <summary>
            Azure Key Vault authentication callback
            </summary>
            <param name="authority"></param>
            <param name="resource"></param>
            <param name="scope"></param>
            <returns></returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.KeyVault.KeyVaultAuthenticator.UpdateAuthInfo(Microsoft.SqlServer.Dac.KeyVault.KeyVaultAuthInfoBase)">
            <summary>
            Passes a <see cref="T:Microsoft.SqlServer.Dac.KeyVault.KeyVaultAuthInfoBase"/> object to the KeyVaultAuthenticator, to support scenarios
            where a user changes authentication method, for instance by logging into a different Azure account
            </summary>
            <param name="authInfo"></param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.KeyVault.KeyVaultAuthenticator.InitializeAuthenticator">
            <summary>
            Gives the authenticator the opportunity to register with the core AlwaysEncrypted callstack. This is important
            in scenarios where Interactive authentication is being used and this is the global authenticator to be used in the application
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.KeyVault.KeyVaultAuthenticator.Validate(System.Collections.Generic.IList{System.String},System.Threading.CancellationToken)">
            <summary>
            Called before Dac operations that may cause data movement against a table with encrypted columns will occur,
            for instance deployment of a dacpac
            </summary>
            <param name="keyVaultUrls">
            A list of URLs representing every Key Vault referenced by column master keys, where the key is involved in a data motion
            operation. 
            </param>
            <param name="cancelToken"></param>
            <returns></returns>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.KeyVault.KeyVaultValidationResult">
            <summary>
            Result returned from a key vault validator. Indicates success or failure, and any 
            relevant error messages
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.KeyVault.KeyVaultValidationResult.#ctor">
            <summary>
            Default constructor
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.KeyVault.KeyVaultValidationResult.AddError(System.String)">
            <summary>
            Adds an error to the list of Validation errors
            </summary>
            <param name="message"></param>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.KeyVault.KeyVaultValidationResult.IsValid">
            <summary>
            Was validation successful?
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.KeyVault.KeyVaultValidationResult.ValidationErrors">
            <summary>
            Errors that caused validation to fail, if any
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.NestedDeploymentPropertyAttribute">
            <summary>
            This class supports the product infrastructure and is not intended to be used directly 
            from your code.
            Indicates that a deployment property should be expanded for commandline property overriding
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.NestedDeploymentPropertyAttribute.#ctor">
            <summary>
            Default Constructor
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.DacExportOptions">
            <summary>
            Defines options that affect the behavior of package export from a database.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacExportOptions.#ctor">
            <summary>
            Construct a new instance of the <see cref="T:Microsoft.SqlServer.Dac.DacExportOptions"/> class.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacExportOptions.CommandTimeout">
            <summary>
            Specifies the command timeout in seconds when executing queries against SQLServer.
            </summary>
            <value>
            The command timeout in seconds.
            Default is 60
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacExportOptions.Storage">
            <summary>
            Get the type of backing storage for the schema model used during extraction.
            </summary>
            <value>
            Enumeration value that specifies the type of backing storage for the schema model used during extraction.
            Default value is File.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacExportOptions.TargetEngineVersion">
            <summary>
            Specifies what the target engine version is expected to be. 
            This is used during export to define the allowed engine version to validate against
            and whether the features of the database match the capabilities of that engine version.
            </summary>
            <value>
            The latest version of Azure contains support for additional capabilities. When this value is
            <see cref="F:Microsoft.SqlServer.Dac.EngineVersion.Default"/> or <see cref="F:Microsoft.SqlServer.Dac.EngineVersion.V11"/>,
            the export operation will fail if the target database is found to contain any objects that
            require a newer engine version.
            
            The default value for this option is <see cref="F:Microsoft.SqlServer.Dac.EngineVersion.Latest"/>, which means that 
            validation will ensure that the export operation will only fail if the target database is 
            found to contain any objects that are not supported in the latest engine version.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacExportOptions.VerifyFullTextDocumentTypesSupported">
            <summary>
            Get or set boolean that specifies whether the supported full-text document types for Microsoft Azure SQL Database v12 should be verified.
            </summary>
            <value>
            True if the package should be verified; otherwise false.
            Default value is false.
            </value> 
        </member>
        <member name="T:Microsoft.SqlServer.Dac.DacImportOptions">
            <summary>
            Defines options that affect the behavior of package import to a database.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacImportOptions.#ctor">
            <summary>
            Construct a new instance of the <see cref="T:Microsoft.SqlServer.Dac.DacImportOptions"/> class.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacImportOptions.ImportContributors">
            <summary>
            Specifies additional deployment contributors which should run.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacImportOptions.ImportContributorArguments">
            <summary>
            Specifies additional deployment contributor arguments.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacImportOptions.DatabaseSpecification">
            <summary>
            Defines optional parameters specific to a Microsoft Azure SQL Database.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacImportOptions.CommandTimeout">
            <summary>
            Specifies the command timeout in seconds when executing queries against SQLServer.
            </summary>
            <value>
            The command timeout in seconds.
            Default is 60
            </value>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.DacOperationProgressMessage">
            <summary>
             Progress message associated with the overal progress import or export operation.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.DacMessage">
            <summary>
            Data associated with an executing operation to report status updates or errors.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacMessage.ToString">
            <summary>
            Return a string that represents the current object.
            </summary>
            <returns>
            String that represents the current object.
            </returns>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacMessage.MessageType">
            <summary>
            Get the type of the event message.
            </summary>
            <value>
            Enumeration value that specifies the type of the event message.
            </value>
            <seealso cref="P:Microsoft.SqlServer.Dac.DacMessage.Message"/>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacMessage.Number">
            <summary>
            Get numeric value associated with the event message.
            </summary>
            <value>
            Numeric value associated with the message.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacMessage.Prefix">
            <summary>
            Get string prefix associated with the source of the event message.
            </summary>
            <value>
            String prefix associated with the source of the event message.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacMessage.Message">
            <summary>
            Get friendly message for the current status of an operation.
            </summary>
            <value>
            String message for the current status of an operation.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacOperationProgressMessage.Progress">
            <summary>
            Current progress in percent complete.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.DacDataProgressMessage">
            <summary>
             Data associated with an executing data operation to report status updates or errors related to progress.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDataProgressMessage.Progress">
            <summary>
            Current progress in percent complete.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDataProgressMessage.SchemaName">
            <summary>
            The schema name of the table whose progress is being reported.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDataProgressMessage.TableName">
            <summary>
            The name of the table whose progress is being reported.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.DacDeployOptions">
            <summary>
            Defines options that affect the behavior of package deployment to a database.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacDeployOptions.#ctor">
            <summary>
            Create a new instance of the <see cref="T:Microsoft.SqlServer.Dac.DacDeployOptions"/> class
            with default options.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacDeployOptions.EnableDnrOrdering(System.Boolean)">
            <summary>
            Interal mechanism to control deployment DNR ordering behavior
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacDeployOptions.#ctor(Microsoft.Data.Tools.Schema.Sql.Deployment.SqlDeploymentOptions)">
            <summary>
            Create a new instance of the <see cref="T:Microsoft.SqlServer.Dac.DacDeployOptions"/> class
            with specified options.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacDeployOptions.#ctor(Microsoft.Data.Tools.Schema.Sql.Deployment.SqlDeploymentOptions,System.Boolean)">
            <summary>
            Create a new instance of the <see cref="T:Microsoft.SqlServer.Dac.DacDeployOptions"/> class
            with specified options.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacDeployOptions.InitializeDefaults(Microsoft.Data.Tools.Schema.Sql.Deployment.SqlDeploymentOptions)">
            <summary>
            Initialize the expected defaults for this API.
            </summary>
            <remarks>
            Only defined where default values differ from the core defaults.
            When new options are added to SqlDeploymentOptions or a default value changed,
            all clients must determine if they must override the default.
            Redundantly specifying existing defaults doesn't reduce need for this
            process when adding options or changing defaults.  Unit tests should
            be employed to validating expectations for each deployment client
            that overrides default options (e.g. power-buffer, schema-compare, this api).
            When removing or renaming an option, the compiler will complain (good).
            </remarks>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.AdditionalDeploymentContributors">
            <summary>
            Specifies additional deployment contributors which should run - in addition
            to those specified in the dacpac.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.AdditionalDeploymentContributorArguments">
            <summary>
            Specifies additional deployment contributor arguments in addition to those already listed
            in the dacpac.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.AllowDropBlockingAssemblies">
            <summary>
            Get or set boolean that specifies whether CLR deployment will cause blocking assemblies to be dropped.
            </summary>
            <value>
            True to drop blocking assemblies during CLR deployment; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.AllowIncompatiblePlatform">
            <summary>
            Get or set boolean that specifies whether deployment will block due to platform compatibility.
            </summary>
            <value>
            True to block deployment to incompatible platforms; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.BackupDatabaseBeforeChanges">
            <summary>
            Get or set boolean that specifies whether a database backup will be performed before proceeding 
            with the actual deployment actions.
            </summary>
            <value>
            True to perform a database backup prior to deployment; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.BlockOnPossibleDataLoss">
            <summary>
            Get or set boolean that specifies whether deployment should stop if the operation could cause data loss.
            </summary>
            <value>
            True to stop deployment if possible data loss if detected; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.BlockWhenDriftDetected">
            <summary>
            Get or set boolean that specifies whether the system will check for differences between the 
            present state of the database and the registered state of the database and block deployment 
            if changes are detected.  Even if this option is set to true, drift detection will only occur 
            on a database if it was previously deployed with the <see cref="P:Microsoft.SqlServer.Dac.DacDeployOptions.RegisterDataTierApplication"/> option enabled.
            </summary>
            <value>
            True to error is drift is detected; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.CommandTimeout">
            <summary>
            Specifies the command timeout in seconds when executing queries against SQLServer.
            </summary>
            <value>
            The command timeout in seconds.
            Default is 60
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.CommentOutSetVarDeclarations">
            <summary>
            Get or set boolean that specifies whether the declaration of SQLCMD variables are commented 
            out in the script header.
            </summary>
            <value>
            True to comment out these declarations; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.CompareUsingTargetCollation">
            <summary>
            Get or set boolean that specifies whether the target collation will be used for identifier 
            comparison.
            </summary>
            <value>
            False to use the source collation; otherwise, true to use the target collation.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.CreateNewDatabase">
            <summary>
            Get or set boolean that specifies whether the existing database will be dropped
            and a new database created before proceeding with the actual deployment actions.
            Acquires single-user mode before dropping the existing database.
            </summary>
            <value>
            True to drop and re-create the database; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.DatabaseSpecification">
            <summary>
            Defines optional parameters specific to a Microsoft Azure SQL Database.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.DeployDatabaseInSingleUserMode">
            <summary>
            Get or set boolean that specifies whether the system will acquire single-user mode on the target
            database during the duration of the deployment operation.
            </summary>
            <value>
            True to acquire single-user mode during deployment; otherwise, false.
            Default is false.
            </value>
            <remarks>
            The database will be returned to multi-user mode after all changes are applied.
            Database may remain in single-user mode if an error occurs during execution.
            </remarks>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.DisableAndReenableDdlTriggers">
            <summary>
            Get or set boolean that specifies if all DDL triggers will be disabled for the duration of the 
            deployment operation and then re-enabled after all changes are applied.  
            </summary>
            <value>
            True to disable DDL triggers during deployment; otherwise, false.
            Default is true.
            </value>
            <remarks>
            Triggers may remain disabled if an error occurs during execution.
            </remarks>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.DoNotAlterChangeDataCaptureObjects">
            <summary>
            Get or set boolean that specifies whether items configured for Change Data Capture (CDC)
            should be altered during deployment.  
            </summary>
            <value>
            True to not alter objects configured for CDC; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.DoNotAlterReplicatedObjects">
            <summary>
            Get or set boolean that specifies whether items configured for Replication
            should be altered during deployment.  
            </summary>
            <value>
            True to not alter objects configured for Replication; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.DoNotDropObjectTypes">
            <summary>
            Get or set a collection of object types that will not be dropped from the target when
            no corresponding object exists in the source. Note that dropping and recreating objects
            of the specified type may still be necessary due to dependencies from other objects.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.DropConstraintsNotInSource">
            <summary>
            Get or set boolean that specifies whether to drop all constraints that do not
            exist in the source model.  
            </summary>
            <value>
            True to drop constraints not in the source model; otherwise, false.
            Default is true.
            </value>
            <remarks>
            This applies to check, default, foreign key, primary key, and unique constraints.
            </remarks>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.DropDmlTriggersNotInSource">
            <summary>
            Get or set boolean that specifies whether to drop all DML triggers that do not
            exist in the source model.
            </summary>
            <value>
            True to drop DML triggers not in the source model; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.DropExtendedPropertiesNotInSource">
            <summary>
            Get or set boolean that specifies whether to drop all extended properties that do 
            not exist in the source model.
            </summary>
            <value>
            True to drop extended properties not in the source model; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.DropIndexesNotInSource">
            <summary>
            Get or set boolean that specifies whether to drop all indexes that do not
            exist in the source model.
            </summary>
            <value>
            True to drop indexes not in the source model; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.DropObjectsNotInSource">
            <summary>
            Get or set boolean that specifies whether objects that exist in the target but not source should be dropped during deployment.
            </summary>
            <value>
            True if objects that exist in the target but not source should be dropped; otherwise false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.DropPermissionsNotInSource">
            <summary>
            Get or set boolean that specifies whether to drop all permissions that do not
            exist in the source model.
            </summary>
            <value>
            True to drop permissions not in the source model; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.DropRoleMembersNotInSource">
            <summary>
            Get or set boolean that specifies whether to drop all role memberships that do not
            exist in the source model.
            </summary>
            <value>
            True to drop role memberships not in the source model; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.DropStatisticsNotInSource">
            <summary>
            Get or set boolean that specifies whether to drop all role memberships that do not
            exist in the source model.
            </summary>
            <value>
            True to drop role memberships not in the source model; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.GenerateSmartDefaults">
            <summary>
            Get or set boolean that specifies whether default values should be generated to populate NULL columns that are constrained to NOT NULL values.
            </summary>
            <value>
            True if default values should be generated; otherwise false.
            Default is false.
            </value>
            <remarks>
            This is useful when needing to add a new NOT NULL column to an existing table with data.
            </remarks>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.IgnoreAnsiNulls">
            <summary>
            Get or set boolean that specifies whether to exclude the ANSI_NULL option from 
            consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in the ANSI_NULL option; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.IgnoreAuthorizer">
            <summary>
            Get or set boolean that specifies whether to exclude the AUTHORIZATION option from 
            consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in the AUTHORIZATION option; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.IgnoreColumnCollation">
            <summary>
            Get or set boolean that specifies whether to exclude the collation specifier from 
            consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in the collation specifier; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.IgnoreColumnOrder">
            <summary>
            Get or set boolean that specifies whether to exclude from consideration 
            the order of columns in tables when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in column order; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.IgnoreComments">
            <summary>
            Get or set boolean that specifies whether to exclude comments from 
            consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in comments; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.IgnoreCryptographicProviderFilePath">
            <summary>
            Get or set boolean that specifies whether to exclude the file specification 
            of a cryptographic provider from consideration when comparing the source and 
            target model.
            </summary>
            <value>
            True to ignore differences in a cryptographic provider's  file specification; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.IgnoreDdlTriggerOrder">
            <summary>
            Get or set boolean that specifies whether to exclude DDL trigger order from 
            consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in DDL trigger order; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.IgnoreDdlTriggerState">
            <summary>
            Get or set boolean that specifies whether to exclude DDL trigger state from 
            consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in DDL trigger state; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.IgnoreDefaultSchema">
            <summary>
            Get or set boolean that specifies whether to exclude the DEFAULT_SCHEMA option from 
            consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in the DEFAULT_SCHEMA options; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.IgnoreDmlTriggerOrder">
            <summary>
            Get or set boolean that specifies whether to exclude DML trigger order from 
            consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in DDL trigger order; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.IgnoreDmlTriggerState">
            <summary>
            Get or set boolean that specifies whether to exclude DML trigger state from 
            consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in DML trigger state; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.IgnoreExtendedProperties">
            <summary>
            Get or set boolean that specifies whether to exclude all extended properties from 
            consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in extended properties; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.IgnoreFileAndLogFilePath">
            <summary>
            Get or set boolean that specifies whether to exclude the FILENAME option of 
            FILE objects from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in the FILENAME option of FILE objects; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.IgnoreFilegroupPlacement">
            <summary>
            Get or set boolean that specifies whether to exclude the filegroup specifier 
            from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in the filegroup specifier; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.IgnoreFileSize">
            <summary>
            Get or set boolean that specifies whether to exclude the SIZE option of FILE objects 
            from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in the SIZE option of FILE objects; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.IgnoreFillFactor">
            <summary>
            Get or set boolean that specifies whether to exclude the FILLFACTOR option
            from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in the FILLFACTOR option; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.IgnoreFullTextCatalogFilePath">
            <summary>
            Get or set boolean that specifies whether to exclude the path specification of 
            FULLTEXT CATALOG objects from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in the path specification of FULLTEXT CATALOG objects; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.IgnoreIdentitySeed">
            <summary>
            Get or set boolean that specifies whether to exclude the seed value of IDENTITY columns 
            from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in the seed value of IDENTITY columns; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.IgnoreIncrement">
            <summary>
            Get or set boolean that specifies whether to exclude the increment value of IDENTITY columns 
            from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in the increment value of IDENTITY columns; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.IgnoreIndexOptions">
            <summary>
            Get or set boolean that specifies whether to exclude differences in index options 
            from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in index options; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.IgnoreIndexPadding">
            <summary>
            Get or set boolean that specifies whether to exclude the PAD_INDEX option 
            from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in the PAD_INDEX option; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.IgnoreKeywordCasing">
            <summary>
            Get or set boolean that specifies whether to exclude difference in the casing of keywords 
            from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in the casing of keywords; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.IgnoreLockHintsOnIndexes">
            <summary>
            Get or set boolean that specifies whether to exclude the ALLOW_ROW_LOCKS and 
            ALLOW_PAGE_LOGKS options from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore the ALLOW_ROW_LOCKS and ALLOW_PAGE_LOGKS options; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.IgnoreLoginSids">
            <summary>
            Get or set boolean that specifies whether to exclude the SID option of the LOGIN object 
            from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore the SID option of the LOGIN object; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.ExcludeObjectTypes">
            <summary>
            Get or set a collection of object types to exclude from consideration when
            comparing the source and target model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.IgnoreNotForReplication">
            <summary>
            Get or set boolean that specifies whether to exclude the NOT FOR REPLICATION option 
            from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore the NOT FOR REPLICATION option; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.IgnoreObjectPlacementOnPartitionScheme">
            <summary>
            Get or set boolean that specifies whether to exclude the partition scheme object
            from consideration when comparing the source and target model for the following
            objects: Table, Index, Unique Key, Primary Key, and Queue.
            </summary>
            <value>
            True to ignore partition schemes; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.IgnorePartitionSchemes">
            <summary>
            Get or set boolean that specifies whether to exclude the parameter type and 
            boundary VALUES of a PARTITION FUNCTION from consideration when comparing the 
            source and target model.  Also excludes FILEGROUP and partition function of a 
            PARTITION SCHEMA from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore aspects of partition functions and schemes; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.IgnorePermissions">
            <summary>
            Get or set boolean that specifies whether to exclude all permission statements 
            from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore all permission statements; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.IgnoreQuotedIdentifiers">
            <summary>
            Get or set boolean that specifies whether to exclude the QUOTED_IDENTIFIER option 
            from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore the QUOTED_IDENTIFIER option; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.IgnoreRoleMembership">
            <summary>
            Get or set boolean that specifies whether to exclude all ROLE MEMBERSHIP objects 
            from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore ROLE MEMBERSHIP objects; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.IgnoreRouteLifetime">
            <summary>
            Get or set boolean that specifies whether to exclude the LIFETIME option of ROUTE objects 
            from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore the LIFETIME option of ROUTE objects; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.IgnoreSemicolonBetweenStatements">
            <summary>
            Get or set boolean that specifies whether to exclude the existence or absence of semi-colons 
            from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore semi-colons; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.IgnoreTableOptions">
            <summary>
            Get or set boolean that specifies whether the options on the target table are updated 
            to match the source table.
            </summary>
            <value>
            True to ignore difference in table options and not update the target table; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.IgnoreUserSettingsObjects">
            <summary>
            Get or set boolean that specifies whether to exclude user settings 
            from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences in user settings; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.IgnoreWhitespace">
            <summary>
            Get or set boolean that specifies whether to exclude whitespace 
            from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore differences whitespace; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.IgnoreWithNocheckOnCheckConstraints">
            <summary>
            Get or set boolean that specifies whether to exclude the CHECK|NO CHECK option of a CHECK 
            constraint object from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore the CHECK|NO CHECK option of a CHECK constraint object; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.IgnoreWithNocheckOnForeignKeys">
            <summary>
            Get or set boolean that specifies whether to exclude the CHECK|NO CHECK option of a FOREIGN KEY  
            constraint object from consideration when comparing the source and target model.
            </summary>
            <value>
            True to ignore the CHECK|NO CHECK option of a FOREIGN KEY constraint object; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.AllowUnsafeRowLevelSecurityDataMovement">
            <summary>
            Get or set boolean that specifies whether to ignore blocking data motion on RLS enabled tables
            </summary>
            <value>
            True to ignore block on data motion when Row level security is enabled on a table
            Default is false i.e. data motion is blocked with RLS by default.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.IncludeCompositeObjects">
            <summary>
            Get or set boolean that specifies whether to include referenced, external elements that also 
            compose the source model and then update the target database in a single deployment operation.
            </summary>
            <value>
            True to include composite objects; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.IncludeTransactionalScripts">
            <summary>
            Get or set boolean that specifies whether to use transations during the deployment operation 
            and commit the transaction after all changes are successfully applied.
            </summary>
            <value>
            True to use transactions during deployment; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.NoAlterStatementsToChangeClrTypes">
            <summary>
            Get or set boolean that specifies whether to force a change to CLR assemblies by dropping and recreating them.
            </summary>
            <value>
            True if CLR assemblies should be dropped; otherwise false to allow ALTER statements to change CLR assemblies.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.PopulateFilesOnFileGroups">
            <summary>
            Get or set boolean that specifies whether files are supplied for filegroups defined in the deployment source.
            </summary>
            <value>
            True to specify files for filegroups; otherwise false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.RegisterDataTierApplication">
            <summary>
            Get or set boolean that specifies whether the database will be registered as a Data-Tier Application.  
            If the target database is already a registered Data-Tier Application, then the registration will be updated.
            </summary>
            <value>
            True to register the database as a Data-Tier Application; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.RunDeploymentPlanExecutors">
            <summary>
            Specifies whether DeploymentPlanExecutor contributors should be run when other operations are executed.
            Default is false.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.ScriptDatabaseCollation">
            <summary>
            Get or set boolean that specifies whether the target database should be altered to match the 
            source model's collation.
            </summary>
            <value>
            True to alter the target database's collation; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.ScriptDatabaseCompatibility">
            <summary>
            Get or set boolean that specifies whether the target database should be altered to match the 
            source model's compatibility level.
            </summary>
            <value>
            True to alter the target database's compatibility level; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.ScriptDatabaseOptions">
            <summary>
            Get or set boolean that specifies whether the database options in the target database should 
            be updated to match the source model.
            </summary>
            <value>
            True to alter the target database's options; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.ScriptDeployStateChecks">
            <summary>
            Get or set boolean that specifies whether the target database should be checked to ensure that 
            it exists, is online and can be updated.
            </summary>
            <value>
            True to perform state checks on the target database; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.ScriptFileSize">
            <summary>
            Get or set boolean that specifies whether a file size is specified when adding files to file groups.
            </summary>
            <value>
            True to specify a file size when adding files to file groups; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.ScriptNewConstraintValidation">
            <summary>
            Get or set boolean that specifies whether constraints are validated after all changes are applied.
            </summary>
            <value>
            True to validate check constraints; otherwise, false.
            Default is true.
            </value>
            <remarks>
            Constraints are always added with NOCHECK option; as a result their validation is skipped during creation.
            </remarks>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.ScriptRefreshModule">
            <summary>
            Get or set boolean that specifies whether referencing procedures are refreshed when referenced objects are updated.
            </summary>
            <value>
            True to refresh referencing procedures; otherwise false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.TreatVerificationErrorsAsWarnings">
            <summary>
            Get or set boolean that specifies whether to treat errors that occur during publish verification as warnings. 
            The check is performed against the generated deployment plan before the plan is executed against the target database. 
            Plan verification detects problems, such as the loss of target-only objects (for example, indexes), that must be 
            dropped to make a change. Verification also detects situations where dependencies (such as tables or views) exist 
            because of a reference to a composite project, but do not exist in the target database. You might choose to treat 
            verification errors as warnings to get a complete list of issues instead of allowing the publish 
            action to stop when the first error occurs.
            </summary>
            <value>
            True to treat errors as warnings; otherwise, false.
            Default is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.UnmodifiableObjectWarnings">
            <summary>
            Get or set boolean that specifies whether warnings should be generated when differences are found 
            in objects that cannot be modified, for example, if the file size or file paths were different for a file.
            </summary>
            <value>
            True to generate warnings; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.VerifyCollationCompatibility">
            <summary>
            Get or set boolean that specifies whether deployment will verify that the collation specified in the 
            source model is compatible with the collation specified in the target model.
            </summary>
            <value>
            True to continue if errors are generated during plan verification; otherwise, false.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.VerifyDeployment">
            <summary>
            Get or set boolean that specifies whether the plan verification phase is executed or not.
            </summary>
            <value>
            True to perform plan verification; otherwise, false to skip it.
            Default is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacDeployOptions.SqlCommandVariableValues">
            <summary>
            Get dictionary of SQL command variable values, keyed by variable name.
            </summary>
            <value>
            Dictionary of SQL command variable values, keyed by variable name.
            </value>
            <remarks>
            Valid values must be provided for every variable before deployment, or failures may occur during deployment.
            </remarks>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.DacErrorResources">
            <summary>
              A strongly-typed resource class, for looking up localized strings, etc.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ResourceManager">
            <summary>
              Returns the cached ResourceManager instance used by this class.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.Culture">
            <summary>
              Overrides the current thread's CurrentUICulture property for all
              resource lookups using this strongly typed resource class.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.BacpacShouldNotContainDeploymentScripts">
            <summary>
              Looks up a localized string similar to BACPAC should not contain either pre-deployment or post-deployment scripts..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.CannotWriteToPackage">
            <summary>
              Looks up a localized string similar to Cannot apply updates to a package loaded for read only..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ConflictingExtendedPropertyDropSetting">
            <summary>
              Looks up a localized string similar to DropExtendedPropertiesNotInSource conflicts with the selected DoNotDropObjectType ExtendedProperties.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ConflictingPermissionsDropSetting">
            <summary>
              Looks up a localized string similar to DropPermissionsNotInSource conflicts with the selected DoNotDropObjectType Permissions.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ConflictingRoleMembershipDropSetting">
            <summary>
              Looks up a localized string similar to DropRoleMembersNotInSource conflicts with the selected DoNotDropObjectType RoleMembership.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.DacMessageFormat">
            <summary>
              Looks up a localized string similar to {0} {1}{2}: {3}.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ElementValidationFailureMessage">
            <summary>
              Looks up a localized string similar to Error validating element {0}: {1}.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorAttemptToUpgradeExistingDatabase">
            <summary>
              Looks up a localized string similar to Cannot deploy to existing database when upgrading has been disabled..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorBacpacValidationFailed">
            <summary>
              Looks up a localized string similar to Validation of the schema model for data package failed. Check the inner exception for details..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorCannotOpenBacPackageWithoutData">
            <summary>
              Looks up a localized string similar to Cannot create a BACPAC from a file that does not contain exported data..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorCannotOpenDacPackageWithData">
            <summary>
              Looks up a localized string similar to Cannot create a DAC package from a file that contains exported data..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorConnectingToDatabase">
            <summary>
              Looks up a localized string similar to Could not connect to database server..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorContainingUnsupportedFullTextDocumentTypesForAzureV12">
            <summary>
              Looks up a localized string similar to Indexing for document type {0} is not supported on {1}..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorCouldNotDetermineExistenceOfDatabase">
            <summary>
              Looks up a localized string similar to Unable to determine the existence of database &apos;{0}&apos;. You must have a user with the same password in master or database &apos;{0}&apos;..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorCouldNotDetermineProviderFromPackage">
            <summary>
              Looks up a localized string similar to Could not determine SQL platform from package..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorCouldNotDetermineServerVersion">
            <summary>
              Looks up a localized string similar to Database source is not a supported version of SQL Server {0}: {1}..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorDataTableNotFound">
            <summary>
              Looks up a localized string similar to Table with schema &quot;{0}&quot; and name &quot;{1}&quot; was specified for data import or export, but does not exist in the database schema..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorDeletingFile">
            <summary>
              Looks up a localized string similar to An error occurred when deleting file &apos;{0}&apos;.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorDeployingPackage">
            <summary>
              Looks up a localized string similar to Could not deploy package..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorExportingPackage">
            <summary>
              Looks up a localized string similar to Could not export schema and data from database..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorExtractAllTableDataTrueAndTablesNotNull">
            <summary>
              Looks up a localized string similar to Argument &apos;ExtractAllTableData&apos; has an invalid value:&apos;true&apos;. &apos;ExtractAllTableData&apos; cannot be &apos;true&apos; because individual user tables are also specified using the &apos;TableData&apos; argument. Set &apos;ExtractAllTableData&apos; to &apos;false&apos; to extract data from the specified user tables..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorExtractingFromFileTable">
            <summary>
              Looks up a localized string similar to Extracting data from FileTable {0}.{1} is not supported..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorExtractingPackageFromDatabase">
            <summary>
              Looks up a localized string similar to Could not extract package from specified database..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorForeignKeyCannotReferenceTable">
            <summary>
              Looks up a localized string similar to Foreign key {0} cannot reference table {1} when used as part of a data package..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorFoundUnsupportedElementsForDataPackage">
            <summary>
              Looks up a localized string similar to One or more unsupported elements were found in the schema used as part of a data package..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorGeneratingDeploymentReport">
            <summary>
              Looks up a localized string similar to Could not generate deployment report..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorGeneratingDeploymentResults">
            <summary>
              Looks up a localized string similar to Could not generate deployment results..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorGeneratingDeploymentScript">
            <summary>
              Looks up a localized string similar to Could not generate deployment script..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorGeneratingDriftReport">
            <summary>
              Looks up a localized string similar to Could not generate drift report..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorImportingPackage">
            <summary>
              Looks up a localized string similar to Could not import package..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorInvalidPropertyName">
            <summary>
              Looks up a localized string similar to The property {0} specified is not present in the resource {1}..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorLoadingConstraints">
            <summary>
              Looks up a localized string similar to Error loading constraint information from target database.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorLoadingPackage">
            <summary>
              Looks up a localized string similar to Could not load package..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorLoadingPackageFrom">
            <summary>
              Looks up a localized string similar to Could not load package from &apos;{0}&apos;..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorReadingDacMetadataFromPackage">
            <summary>
              Looks up a localized string similar to Could not load data-tier application metadata from package..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorReadingFromFile">
            <summary>
              Looks up a localized string similar to An error occurred reading the contents of file &apos;{0}&apos;.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorReadingModelFromPackage">
            <summary>
              Looks up a localized string similar to Could not load schema model from package..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorReadingModelHeader">
            <summary>
              Looks up a localized string similar to Could not read schema model header information from package..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorReadingProfile">
            <summary>
              Looks up a localized string similar to Could not read profile properties: {0}.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorReadingProfileProperties">
            <summary>
              Looks up a localized string similar to Could not read profile properties: {0}.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorReadingScriptFromPackage">
            <summary>
              Looks up a localized string similar to Could not load script from package..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorRegisteringApplication">
            <summary>
              Looks up a localized string similar to Could not register DAC information..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorSavingPackage">
            <summary>
              Looks up a localized string similar to Could not save package to file..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorStreamDoesNotSupportReading">
            <summary>
              Looks up a localized string similar to Stream does not support reading..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorStreamDoesNotSupportSeeking">
            <summary>
              Looks up a localized string similar to Stream does not support seeking..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorStreamDoesNotSupportWriting">
            <summary>
              Looks up a localized string similar to Stream does not support writing..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorTranslatingPackage">
            <summary>
              Looks up a localized string similar to Could not translate package..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorUnpacking_FileExists">
            <summary>
              Looks up a localized string similar to Cannot unpack to the same location twice. The file &apos;{0}&apos; already exists in the unpack directory.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorUnpackingPackage">
            <summary>
              Looks up a localized string similar to Could not unpack the package..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorUnregisteringApplication">
            <summary>
              Looks up a localized string similar to Could not unregister DAC information..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorUnsupportedClrElementForDataPackage">
            <summary>
              Looks up a localized string similar to Element {0} is an unsupported CLR element that is not allowed when used as part of a data package..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorUnsupportedContainedUserElementForDataPackage">
            <summary>
              Looks up a localized string similar to Element {0} is a contained user that is not supported when used as a part of a data package..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorUnsupportedElementForDataPackage">
            <summary>
              Looks up a localized string similar to The element {0} is not supported when used as part of a data package (.bacpac file)..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorUnsupportedElementPropertyForDataPackage">
            <summary>
              Looks up a localized string similar to Element {0} has an unsupported property {1} set and is not supported when used as part of a data package..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorUnsupportedFileStreamColumnForDataPackage">
            <summary>
              Looks up a localized string similar to Element {0} is an unsupported FILESTREAM column that is not allowed when used as part of a data package..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorUnsupportedMultiPartNameForSynonym">
            <summary>
              Looks up a localized string similar to {0} is not supported on Microsoft Azure SQL Database as it aliases the external element {1}..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorUnsupportUserDefinedTypeColumnForDataPackage">
            <summary>
              Looks up a localized string similar to Element {0} is an unsupported CLR User-defined type column that is not allowed when used as part of a data package..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorUpdatingDacHistory">
            <summary>
              Looks up a localized string similar to Could not update the dac history table..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorValidationFailed">
            <summary>
              Looks up a localized string similar to Validation of the schema model for data package failed..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ErrorVerifyingDeploymentPlan">
            <summary>
              Looks up a localized string similar to Verification of the deployment plan failed..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ExportedRowsMayBeIncomplete">
            <summary>
              Looks up a localized string similar to The row-level security policies of this database restrict some users&apos; ability to access data in these tables: &apos;{0}&apos;. Please verify that the credentials you&apos;re using have sufficient privileges to access all the data in these tables..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ExportedRowsMayContainSomeMaskedData">
            <summary>
              Looks up a localized string similar to The database permissions may restrict the ability of some users&apos; to see the actual data contained in these tables: &apos;{0}&apos;. Please verify that the credentials you&apos;re using have sufficient privileges to see all data unmasked..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.InvalidArgumentValue">
            <summary>
              Looks up a localized string similar to {0} is not a valid value for {1}..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.InvalidModelHeaderData">
            <summary>
              Looks up a localized string similar to The model header data from the package &apos;{0}&apos; is invalid..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.NoKeyVaultAuthenticatorFound">
            <summary>
              Looks up a localized string similar to Cannot proceed as Key Vault support is not present in the current application. For Key Vault support during deployment, install DacFramework.msi and run SqlPackage.exe from its install location..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.PackagingModelFailed">
            <summary>
              Looks up a localized string similar to Packaging the model failed..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ReferencedPackageDoesnotExist">
            <summary>
              Looks up a localized string similar to The referenced package &apos;{0}&apos; doesn&apos;t exist..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ScriptRequiresOneOfTwoOptions">
            <summary>
              Looks up a localized string similar to At least one of the options {0} or {1} must be enabled..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.TranslatingModelFailed">
            <summary>
              Looks up a localized string similar to Translating the model failed..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.UnknownPackageVersion">
            <summary>
              Looks up a localized string similar to The version of the supplied package, {0}, is incompatible with this version of the DAC Framework..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacErrorResources.ValidatingTheModelAgainstTargetPlatformFailed">
            <summary>
              Looks up a localized string similar to Validating the model against target platform failed..
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.DacExceptionMessage">
            <summary>
            Data associated with an error with exception information.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacExceptionMessage.Exception">
            <summary>
            Get exception associated with the event message.
            </summary>
            <value>
            Exception object associated with the message.
            </value>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.DacAzureEdition">
            <summary>
            List of possible editions for a Microsoft Azure SQL Database
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.DacAzureEdition.Web">
            <summary>
            CREATE DATABASE database_name EDITION = <b>'web'</b>
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.DacAzureEdition.Business">
            <summary>
            CREATE DATABASE database_name EDITION = <b>'business'</b>
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.DacAzureEdition.Basic">
            <summary>
            CREATE DATABASE database_name EDITION = <b>'basic'</b>
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.DacAzureEdition.Standard">
            <summary>
            CREATE DATABASE database_name EDITION = <b>'standard'</b>
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.DacAzureEdition.Premium">
            <summary>
            CREATE DATABASE database_name EDITION = <b>'premium'</b>
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.DacAzureEdition.PremiumRS">
            <summary>
            CREATE DATABASE database_name EDITION = <b>'premiumRS'</b>
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.DacAzureEdition.Default">
            <summary>
            CREATE DATABASE database_name
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.DacAzureDatabaseSpecification">
            <summary>
            Defines optional parameters specific to a Microsoft Azure SQL Database
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacAzureDatabaseSpecification.#ctor">
            <summary>
            Default constructor
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacAzureDatabaseSpecification.Edition">
            <summary>
            Database Edition
            </summary>
            <remarks>
            CREATE DATABASE database_name  [ COLLATE collation_name ]
            {
               ({edition_options} [, ...n]) 
            }
            
            {edition_options} ::= 
            {
               (MAXSIZE = { 100 MB | 500 MB | 1 | 5 | 10 | 20 | 30 ... 150 ... 500 } GB
                |<b>(EDITION = {'web' | 'business' | 'basic' | 'standard' | 'premium' | 'premiumRS'})</b>
                |<b>(SERVICE_OBJECTIVE = { 'shared' | 'basic' | 'S0' | 'S1' | 'S2' | 'S3' | 'P1' | 'P2' | 'P3' | 'P4' | 'P6' | 'P11' | 'P15' | 'PRS1' | 'PRS2' | 'PRS4' | 'PRS6' })</b>
            }
            </remarks>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacAzureDatabaseSpecification.MaximumSize">
            <summary>
            Maximum size, in GB
            </summary>
            <remarks>
            CREATE DATABASE database_name  [ COLLATE collation_name ]
            {
               ({edition_options} [, ...n]) 
            }
            
            {edition_options} ::= 
            {
               <b>(MAXSIZE = { 100 MB | 500 MB | 1 | 5 | 10 | 20 | 30 ... 150 ... 500 } GB</b>
                |(EDITION = {'web' | 'business' | 'basic' | 'standard' | 'premium' | 'premiumRS'})
                |(SERVICE_OBJECTIVE = { 'shared' | 'basic' | 'S0' | 'S1' | 'S2' | 'S3' | 'P1' | 'P2' | 'P3' | 'P4' | 'P6' | 'P11' | 'P15' | 'PRS1' | 'PRS2' | 'PRS4' | 'PRS6' })
            }
            </remarks>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacAzureDatabaseSpecification.ServiceObjective">
            <summary>
            Database Performance Level
            </summary>
            <remarks>
            CREATE DATABASE database_name  [ COLLATE collation_name ]
            {
               ({edition_options} [, ...n]) 
            }
            
            {edition_options} ::= 
            {
               (MAXSIZE = { 100 MB | 500 MB | 1 | 5 | 10 | 20 | 30 ... 150 ... 500 } GB  
                |(EDITION = {'web' | 'business' | 'basic' | 'standard' | 'premium' | 'premiumRS'})
                |<b>(SERVICE_OBJECTIVE = { 'shared' | 'basic' | 'S0' | 'S1' | 'S2' | 'S3' | 'P1' | 'P2' | 'P3' | 'P4' | 'P6' | 'P11' | 'P15' | 'PRS1' | 'PRS2' | 'PRS4' | 'PRS6' })</b>
            }
            </remarks>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.DacExtractOptions">
            <summary>
            Defines options that affect the behavior of package extraction.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacExtractOptions.#ctor">
            <summary>
            Construct a new instance of the <see cref="T:Microsoft.SqlServer.Dac.DacExtractOptions"/> class.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacExtractOptions.CommandTimeout">
            <summary>
            Specifies the command timeout in seconds when executing queries against SQLServer.
            </summary>
            <value>
            The command timeout in seconds.
            Default is 60
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacExtractOptions.ExtractAllTableData">
            <summary>
            Get or set boolean that specifies whether data for all user tables will be extracted.
            </summary>
            <value>
            True if data for all user tables will be extracted; otherwise false.
            Default value is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacExtractOptions.ExtractReferencedServerScopedElements">
            <summary>
            Get or set boolean that specifies whether server-scoped elements referenced by the source should be extracted.
            </summary>
            <value>
            True if references server-scoped elements should be extracted; otherwise false.
            Default value is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacExtractOptions.ExtractApplicationScopedObjectsOnly">
            <summary>
            Get or set boolean that specifies the scope of objects extracted from the source.
            </summary>
            <value>
            True if only application-scoped objects should be extracted;
            otherwise false to extract all object types.
            Default value is true.
            </value>        
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacExtractOptions.IgnoreExtendedProperties">
            <summary>
            Get or set boolean that specifies whether extended properties should be ignored.
            </summary>
            <value>
            True if extended properties will be ignored; otherwise false.
            Default value is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacExtractOptions.IgnorePermissions">
            <summary>
            Get or set boolean that specifies whether permissions should be ignored.
            </summary>
            <value>
            True if permissions will be ignored; otherwise false.
            Default value is true.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacExtractOptions.IgnoreUserLoginMappings">
            <summary>
            Get or set boolean that specifies whether mappings between users and logins should be extracted from the source.
            </summary>
            <value>
            True if user login mappings will be ignored; otherwise false.
            Default value is false.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacExtractOptions.Storage">
            <summary>
            Get the type of backing storage for the schema model used during extraction.
            </summary>
            <value>
            Enumeration value that specifies the type of backing storage for the schema model used during extraction.
            Default value is File.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacExtractOptions.VerifyExtraction">
            <summary>
            Get or set boolean that specifies whether the extracted package should be verified.
            </summary>
            <value>
            True if the package should be verified; otherwise false.
            Default value is false.
            </value> 
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacExtractOptions.ExtractUsageProperties">
            <summary>
            Usage properties include Table.RowCount, Table.IndexSize, Table.DataSize, Table.UsedPages and Table.DataPages.
            When true, these properties are extracted from the database and are accessible in the model.
            </summary>
            <value>
            True if usage properties will be extracted; otherwise false.
            Default value is false.
            </value>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.DacMessageEventArgs">
            <summary>
            Data associated with event raised as an executing operation reports status updates or errors.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacMessageEventArgs.Message">
            <summary>
            Message information associated with this event instance.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.DacMessageType">
            <summary>
            Specifies the type (or severity) of message associated with a given event.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.DacMessageType.Message">
            <summary>
            Informational message.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.DacMessageType.Warning">
            <summary>
            Noncritical problem.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.DacMessageType.Error">
            <summary>
            Serious, possibly fatal issue.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.DacOperationStatus">
            <summary>
            Specifies the state of a service operation.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.DacOperationStatus.Pending">
            <summary>
            Operation has not yet started.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.DacOperationStatus.Running">
            <summary>
            Operation is executing.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.DacOperationStatus.Completed">
            <summary>
            Operation has finished execution.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.DacOperationStatus.Faulted">
            <summary>
            Operation did not complete execution.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.DacOperationStatus.Cancelled">
            <summary>
            Operation was cancelled.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.DacPackage">
            <summary>
            Representation of the artifact that contains the definition of a data-tier application.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacPackage.Dispose">
            <summary>
            Release the resources held by this instance.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacPackage.Unpack(System.String)">
            <summary>
            Place the contents of this package into the directory specified by <paramref name="directoryPath"/>.
            </summary>
            <param name="directoryPath">
            Base directory in which to place the package contents.
            </param>
            <exception cref="T:System.ArgumentException">
            If <paramref name="directoryPath"/> is a null reference or empty string.
            </exception>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">
            If an error occurs while attempting to unpack the package.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacPackage.Unpack(Microsoft.SqlServer.Dac.IPackageSource,System.String)">
            <summary>
            Place the contents of this package into the directory specified by <paramref name="directoryPath"/>.
            </summary>
            <param name="packageSource">
            Object used to access package content.
            </param>
            <param name="directoryPath">
            Base directory in which to place the package contents.
            </param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacPackage.Load(System.String)">
            <summary>
            Load a package file specified by <paramref name="fileName"/>.
            </summary>
            <param name="fileName">
            Path to the package file.
            </param>
            <returns>
            <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> instance that represents the package loaded from the specified file.
            </returns>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">
            If there is a problem reading the package; or if the package contains exported data.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacPackage.Load(System.String,Microsoft.SqlServer.Dac.DacSchemaModelStorageType)">
            <summary>
            Load a package file specified by <paramref name="fileName"/>.
            </summary>
            <param name="fileName">
            Path to the package file.
            </param>
            <param name="modelStorageType">
            Backing storage type for package instance.
            </param>
            <returns>
            <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> instance that represents the package loaded from the specified file.
            </returns>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">
            If there is a problem reading the package; or if the package contains exported data.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacPackage.Load(System.String,Microsoft.SqlServer.Dac.DacSchemaModelStorageType,System.IO.FileAccess)">
            <summary>
            Load a package file specified by <paramref name="fileName"/>.
            </summary>
            <param name="fileName">
            Path to the package file.
            </param>
            <param name="modelStorageType">
            Backing storage type for package instance.
            </param>
            <param name="packageAccess">
            The access in which to open the package. Valid values are <see cref="F:System.IO.FileAccess.Read"/> or <see cref="F:System.IO.FileAccess.ReadWrite"/>.
            </param>
            <returns>
            <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> instance that represents the package loaded from the specified file.
            </returns>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">
            If there is a problem reading the package; or if the package contains exported data.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacPackage.Load(System.IO.Stream)">
            <summary>
            Load a package from the specified <see cref="T:System.IO.Stream"/>.
            </summary>
            <param name="stream">
            Stream from which to read the package.
            </param>
            <returns>
            <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> instance that represents the package loaded from the specified <see cref="T:System.IO.Stream"/>.
            </returns>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">
            If there is a problem reading the package; or if the package contains exported data.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacPackage.Load(System.IO.Stream,Microsoft.SqlServer.Dac.DacSchemaModelStorageType)">
            <summary>
            Load a package from the specified <see cref="T:System.IO.Stream"/>.
            </summary>
            <param name="stream">
            Stream from which to read the package.
            </param>
            <param name="modelStorageType">
            Backing storage type for package instance.
            </param>
            <returns>
            <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> instance that represents the package loaded from the specified <see cref="T:System.IO.Stream"/>.
            </returns>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">
            If there is a problem reading the package; or if the package contains exported data.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacPackage.Load(System.IO.Stream,Microsoft.SqlServer.Dac.DacSchemaModelStorageType,System.IO.FileAccess)">
            <summary>
            Load a package from the specified <see cref="T:System.IO.Stream"/>.
            </summary>
            <param name="stream">
            Stream from which to read the package.
            </param>
            <param name="modelStorageType">
            Backing storage type for package instance.
            </param>
            <param name="packageAccess">
            The access in which to open the package. Valid values are <see cref="F:System.IO.FileAccess.Read"/> or <see cref="F:System.IO.FileAccess.ReadWrite"/>.
            </param>
            <returns>
            <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> instance that represents the package loaded from the specified <see cref="T:System.IO.Stream"/>.
            </returns>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">
            If there is a problem reading the package; or if the package contains exported data.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacPackage.Save(System.IO.Stream,Microsoft.Data.Tools.Schema.SchemaModel.DataSchemaModel,Microsoft.Data.Tools.Schema.Sql.Dac.DacMetadata,System.Nullable{System.UInt32})">
            <summary>
            Write package with the supplied schema model and DAC metadata to the supplied <see cref="T:System.IO.Stream"/>.
            </summary>
            <param name="stream">
            <see cref="T:System.IO.Stream"/> to which to write the package.
            </param>
            <param name="model">
            Schema model to be serialized into package.
            </param>
            <param name="metadata">
            DAC metadata to be serialized into package.
            </param>
            <param name="minModelVersion">
            Optional minimum model schema version to use when saving model.
            </param>
            <returns>The model version used for the serialization</returns>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacPackage.Name">
            <summary>
            Get identifier for this package.
            </summary>
            <value>
            String identifier for this package.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacPackage.Description">
            <summary>
            Get an optional summary of this package.
            </summary>
            <value>
            String summary of this package; or null reference if there is no summary.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacPackage.Version">
            <summary>
            Get version information for this package.
            </summary>
            <value>
            <see cref="P:Microsoft.SqlServer.Dac.DacPackage.Version"/> structure that specifies the version information for this package.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacPackage.PreDeploymentScript">
            <summary>
            Get stream used to read and write script executed prior to deploying schema contained in this package.
            </summary>
            <value>
            <see cref="T:System.IO.Stream"/> instance used to read and write script contents.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacPackage.PostDeploymentScript">
            <summary>
            Get stream used to read and write script executed after deploying schema contained in this package.
            </summary>
            <value>
            <see cref="T:System.IO.Stream"/> instance used to read and write script contents.
            </value>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.DacProfile">
            <summary>
            Contains settings related to a specific deployment configuration.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacProfile.#ctor">
            <summary>
            Construct a new instance of the <see cref="T:Microsoft.SqlServer.Dac.DacProfile"/> class with a default set of deployment options.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacProfile.Load(System.String)">
            <summary>
            Create a <see cref="T:Microsoft.SqlServer.Dac.DacProfile"/> instance by reading serialized profile data from the specified file.
            </summary>
            <param name="fileName">
            Path to file with serialized profile data.
            </param>
            <returns>
            <see cref="T:Microsoft.SqlServer.Dac.DacProfile"/> instance initialized from the serialized file data.
            </returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacProfile.Load(System.IO.Stream)">
            <summary>
            Create a <see cref="T:Microsoft.SqlServer.Dac.DacProfile"/> instance by reading serialized profile data from the specified <see cref="T:System.IO.Stream"/>.
            </summary>
            <param name="stream">
            Stream from which to read serialized profile data.
            </param>
            <returns>
            <see cref="T:Microsoft.SqlServer.Dac.DacProfile"/> instance initialized from the serialized file data.
            </returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacProfile.LoadImpl(System.Func{Microsoft.Data.Tools.Schema.Sql.Deployment.PublishProfileSerializer})">
            <summary>
            Create a <see cref="T:Microsoft.SqlServer.Dac.DacProfile"/> instance by reading serialized profile data from the specified <see cref="T:System.IO.Stream"/>.
            </summary>
            <param name="serializerProvider">
            Provider that creates serializer from which to read parsed profile data.
            </param>
            <returns>
            <see cref="T:Microsoft.SqlServer.Dac.DacProfile"/> instance initialized from the serialized file data.
            </returns>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacProfile.DeployOptions">
            <summary>
            Get deployment options associated with this profile.
            </summary>
            <value>
            <see cref="T:Microsoft.SqlServer.Dac.DacDeployOptions"/> instance that specifies deployment options.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacProfile.TargetDatabaseName">
            <summary>
            Get or set name of database used as the target of a deployment.
            </summary>
            <value>
            String name of target database.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacProfile.TargetConnectionString">
            <summary>
            Get or set connection string for database server used as the target of a deployment.
            </summary>
            <value>
            String that specifies database server connection information.
            </value>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.DacProgressEventArgs">
            <summary>
            Data associated with event raised as an executing operation completes individual steps of processing.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacProgressEventArgs.Status">
            <summary>
            Get status of an active operation.
            </summary>
            <value>
            <see cref="T:Microsoft.SqlServer.Dac.DacOperationStatus"/> enumeration value that specifies the current status of an operation.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacProgressEventArgs.Message">
            <summary>
            Get a friendly message associated with the current step of an operation.
            </summary>
            <value>
            String message associated with the current step of an operation.
            </value>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacProgressEventArgs.OperationId">
            <summary>
            Gets the ID of the top level task the progress event relates to.
            </summary>
            <remarks>
                <ul>
                <li>Extract = 1</li>
                <li>Publish = 2</li>
                <li>ImportData = 3</li>
                <li>ExportData = 4</li>
                <li>Unregister = 5</li>
                <li>Register = 6</li>
                <li>DriftReport = 7</li>
                <li>DeployReport = 8</li>
                <li>Script = 9</li>
                </ul>
            </remarks>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.DacRetryMessage">
            <summary>
            This message is raised when the DacFx API retried a command or connection due to a
            transient error returned by the server.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacRetryMessage.RetryCount">
            <summary>
            The retry count when this error was encountered
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacRetryMessage.ServerErrorNumber">
            <summary>
            The number of the error from SQL Server or 0 if a different 
            exception was encountered (that invoked a retry)
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.DacSchemaModelStorageType">
            <summary>
            Specifies the type of backing storage for a schema model.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.DacSchemaModelStorageType.File">
            <summary>
            Model is back by file-based storage.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.DacSchemaModelStorageType.Memory">
            <summary>
            Model is stored completely in-memory.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.DacServicesException">
            <summary>
            Exception thrown for DAC service errors.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServicesException.#ctor">
            <summary>
            Construct a new instance of the <see cref="T:Microsoft.SqlServer.Dac.DacServicesException"/> class.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServicesException.#ctor(System.String)">
            <summary>
            Construct a new instance of the <see cref="T:Microsoft.SqlServer.Dac.DacServicesException"/> class with the specified error message.
            </summary>
            <param name="message">
            The message that describes the error.
            </param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServicesException.#ctor(System.String,System.Exception)">
            <summary>
            Construct a new instance of the <see cref="T:Microsoft.SqlServer.Dac.DacServicesException"/> class with the specified error message 
            and a reference to the inner exception that is the cause of this exception.
            </summary>
            <param name="message">
            The message that describes the error.
            </param>
            <param name="innerException">
            The exception that is the cause of the current exception, or a null reference if no inner exception is specified. 
            </param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServicesException.GetObjectData(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
            <summary>
            Write exception information to the supplied <see cref="T:System.Runtime.Serialization.SerializationInfo"/> object.
            </summary>
            <param name="info">
            <see cref="T:System.Runtime.Serialization.SerializationInfo"/> that holds the serialized object data.
            </param>
            <param name="context">
            <see cref="T:System.Runtime.Serialization.StreamingContext"/> that contains contextual information about the source or destination.
            </param>
            <exception cref="T:System.ArgumentNullException">
            If <paramref name="info"/> is a null reference.
            </exception>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DacServicesException.Messages">
            <summary>
            Get collection of additional error, warning, and informational messages associated with this exception.
            </summary>
            <value>
            Collection of additional messages associated with this exception.
            </value>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.DacServices">
            <summary>
            Provides operations to create and consume DAC packages represented by <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> instances.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.DacServices._userConnectionFactory">
            <summary>
            Connection factory using the connection string supplied by caller.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServices.Initialize">
            <summary>
            Called by classes within the API to initialize any static state
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServices.#ctor(System.String)">
            <summary>
            Construct a new instance of the <see cref="T:Microsoft.SqlServer.Dac.DacServices"/> class
            that operates against the database specified by the supplied connection string.
            </summary>
            <param name="connectionString">
            String that supplies connection information for the database connection used by this instance.
            </param>
            <exception cref="T:System.ArgumentNullException">
            If <paramref name="connectionString"/> is a null reference.
            </exception>
            <exception cref="T:System.ArgumentException">
            If the supplied <paramref name="connectionString"/> is not valid.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServices.#ctor(System.String,Microsoft.SqlServer.Dac.IUniversalAuthProvider)">
            <summary>
            Construct a new instance of the <see cref="T:Microsoft.SqlServer.Dac.DacServices"/> class
            that operates against the database specified by the supplied connection string and authentication provider.
            </summary>
            <param name="connectionString">
            String that supplies connection information for the database connection used by this instance.
            </param>
            <param name="authProvider">
            Provide the up-to-date access token for AAD Universal Login (smartcard, phone, etc) 
            </param>
            <exception cref="T:System.ArgumentNullException">
            If <paramref name="connectionString"/> is a null reference.
            If <paramref name="authProvider"/> is a null reference.
            </exception>
            <exception cref="T:System.ArgumentException">
            If the supplied <paramref name="connectionString"/> is not valid.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServices.#ctor(System.String,System.Security.SecureString)">
            <summary>
            Construct a new instance of the <see cref="T:Microsoft.SqlServer.Dac.DacServices"/> class
            that operates against the database specified by the supplied connection string.
            </summary>
            <param name="connectionString">
            String that supplies connection information for the database connection used by this instance.
            </param>
            <param name="password">
            SecureString that supplies password for the database connection used by this instance.
            </param>
            <exception cref="T:System.ArgumentNullException">
            If <paramref name="connectionString"/> is a null reference.
            </exception>
            <exception cref="T:System.ArgumentException">
            If the supplied <paramref name="connectionString"/> is not valid.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServices.Extract(System.String,System.String,System.String,System.Version,System.String,System.Collections.Generic.IEnumerable{System.Tuple{System.String,System.String}},Microsoft.SqlServer.Dac.DacExtractOptions,System.Nullable{System.Threading.CancellationToken})">
            <summary>
            Extract the schema from a database into a package.
            </summary>
            <param name="packageFileName">
            Path to the package file to be created.
            </param>
            <param name="databaseName">
            Name of the source database.
            </param>
            <param name="applicationName">
            String identifier for the DAC application.
            </param>
            <param name="applicationVersion">
            Version of the DAC application.
            </param>
            <param name="applicationDescription">
            Optional string summary of the DAC application.
            </param>
            <param name="tables">
            <para>
            Optional enumerable used to retrieve enumerator over set of tables for which reference data should be stored.
            For each <see cref="T:System.Tuple"/> in the enumeration the first item specifies the schema of the table, and the second specifies the base identifier of the table.
            </para>
            <para>
            If the value for this parameter is a null reference, no reference data will be stored.
            </para>
            </param>
            <param name="extractOptions">
            Optional <see cref="T:Microsoft.SqlServer.Dac.DacExtractOptions"/> instance used to specify options that affect the behavior of package extraction.
            </param>
            <param name="cancellationToken">
            Optional <see cref="T:System.Threading.CancellationToken"/> that can be used to indicate that the operation should be cancelled.
            Use of this object does not guarantee that the operation will be cancelled.
            </param>
            <exception cref="T:System.ArgumentException">
            If <paramref name="applicationName"/> is a null reference or empty string.
            </exception>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">
            If a problem occurs during package extraction.
            </exception>
            <exception cref="T:System.OperationCanceledException">
            If the <see cref="T:System.Threading.CancellationToken"/> has a cancellation requested and the operation could be cancelled.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServices.Extract(System.IO.Stream,System.String,System.String,System.Version,System.String,System.Collections.Generic.IEnumerable{System.Tuple{System.String,System.String}},Microsoft.SqlServer.Dac.DacExtractOptions,System.Nullable{System.Threading.CancellationToken})">
            <summary>
            Extract the schema from a database into a package.
            </summary>
            <param name="packageStream">
            <see cref="T:System.IO.Stream"/> to which to write the package.
            </param>
            <param name="databaseName">
            Name of the source database.
            </param>
            <param name="applicationName">
            String identifier for the DAC application.
            </param>
            <param name="applicationVersion">
            Version of the DAC application.
            </param>
            <param name="applicationDescription">
            Optional string summary of the DAC application.
            </param>
            <param name="tables">
            <para>
            Optional enumerable used to retrieve enumerator over set of tables for which data should be exported.
            For each <see cref="T:System.Tuple"/> in the enumeration the first item specifies the schema of the table, and the second specifies the base identifier of the table.
            </para>
            <para>
            If the value for this parameter is a null reference, no data will be exported.
            </para>
            </param>
            <param name="extractOptions">
            Optional <see cref="T:Microsoft.SqlServer.Dac.DacExtractOptions"/> instance used to specify options that affect the behavior of package extraction.
            </param>
            <param name="cancellationToken">
            Optional <see cref="T:System.Threading.CancellationToken"/> that can be used to indicate that the operation should be cancelled.
            Use of this object does not guarantee that the operation will be cancelled.
            </param>
            <exception cref="T:System.ArgumentException">
            If <paramref name="applicationName"/> is a null reference or empty string.
            </exception>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">
            If a problem occurs during package extraction; or the supplied stream is not suitable for writing the package.
            </exception>
            <exception cref="T:System.OperationCanceledException">
            If the <see cref="T:System.Threading.CancellationToken"/> has a cancellation requested and the operation could be cancelled.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServices.Script(Microsoft.SqlServer.Dac.DacPackage,System.String,Microsoft.SqlServer.Dac.PublishOptions)">
            <summary>
            Scripts the steps for a publish operation as a deployment script, deployment report, or both. 
            At least one of the <see cref="P:Microsoft.SqlServer.Dac.PublishOptions.GenerateDeploymentScript"/> or <see cref="P:Microsoft.SqlServer.Dac.PublishOptions.GenerateDeploymentReport"/> 
            options must be set to true. This method will not publish to the database 
            </summary>
            <param name="package">
            <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> containing schema to be deployed.
            </param>
            <param name="targetDatabaseName">
            Name of the target database for deployment.
            </param>
            <param name="publishOptions">
            Instance of <see cref="T:Microsoft.SqlServer.Dac.PublishOptions"/> that specifies what is reported back - the deployment script,
            deployment report, as well as how to configure various aspects of the deployment.
            </param>
            <returns><see cref="T:Microsoft.SqlServer.Dac.PublishResult"/>, containing the script(s) and/or report if requested by the caller</returns>
            <exception cref="T:System.ArgumentException">
            If the value for any of the required parameters is a null reference or an empty string.
            </exception>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">
            If an error occurs during deployment.
            </exception>
            <exception cref="T:System.OperationCanceledException">
            If the <see cref="T:System.Threading.CancellationToken"/> has a cancellation requested and the operation could be cancelled.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServices.Script(Microsoft.SqlServer.Dac.DacPackage,Microsoft.SqlServer.Dac.DacPackage,System.String,Microsoft.SqlServer.Dac.PublishOptions)">
            <summary>
            Scripts the steps for a publish operation as a deployment script, deployment report, or both. 
            At least one of the <see cref="P:Microsoft.SqlServer.Dac.PublishOptions.GenerateDeploymentScript"/> or <see cref="P:Microsoft.SqlServer.Dac.PublishOptions.GenerateDeploymentReport"/> 
            options must be set to true. This method will not modify the target
            </summary>
            <param name="sourcePackage">
            <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> containing schema to be deployed.
            </param>
            <param name="targetPackage">
            <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> containing schema representing the target database.
            </param>
            <param name="targetDatabaseName">
            Name of the target database for deployment.
            </param>
            <param name="publishOptions">
            Instance of <see cref="T:Microsoft.SqlServer.Dac.PublishOptions"/> that specifies what is reported back - the deployment script,
            deployment report, as we all how to configure various aspects of the deployment.
            </param>
            <returns><see cref="T:Microsoft.SqlServer.Dac.PublishResult"/>, containing the script(s) and/or report if requested by the caller</returns>
            <exception cref="T:System.ArgumentException">
            If the value for any of the required parameters is a null reference or an empty string.
            </exception>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">
            If an error occurs during deployment.
            </exception>
            <exception cref="T:System.OperationCanceledException">
            If the <see cref="T:System.Threading.CancellationToken"/> has a cancellation requested and the operation could be cancelled.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServices.Publish(Microsoft.SqlServer.Dac.DacPackage,System.String,Microsoft.SqlServer.Dac.PublishOptions)">
            <summary>
            Publish the supplied package to a database. This method supports returning the script used when publishing along with
            a deployment report summarizing the actions taken during Publish
            </summary>
            <param name="package">
            <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> containing schema to be deployed.
            </param>
            <param name="targetDatabaseName">
            Name of the target database for deployment.
            </param>
            <param name="publishOptions">
            Instance of <see cref="T:Microsoft.SqlServer.Dac.PublishOptions"/> that specifies what is reported back - the deployment script,
            deployment report, as we all how to configure various aspects of the deployment.
            </param>
            <returns><see cref="T:Microsoft.SqlServer.Dac.PublishResult"/>, containing the script(s) and/or report if requested by the caller</returns>
            <exception cref="T:System.ArgumentException">
            If the value for any of the required parameters is a null reference or an empty string.
            </exception>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">
            If an error occurs during deployment.
            </exception>
            <exception cref="T:System.OperationCanceledException">
            If the <see cref="T:System.Threading.CancellationToken"/> has a cancellation requested and the operation could be cancelled.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServices.Deploy(Microsoft.SqlServer.Dac.DacPackage,System.String,System.Boolean,Microsoft.SqlServer.Dac.DacDeployOptions,System.Nullable{System.Threading.CancellationToken})">
            <summary>
            Deploy the supplied package to a database.
            </summary>
            <param name="package">
            <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> containing schema to be deployed.
            </param>
            <param name="targetDatabaseName">
            Name of the target database for deployment.
            </param>
            <param name="upgradeExisting">
            True to allow modification of existing database schema in order to match schema contained in source package;
            otherwise false to block modification of existing database.
            If the database does not exist this flag has no effect.
            </param>
            <param name="options">
            Instance of <see cref="T:Microsoft.SqlServer.Dac.DacDeployOptions"/> that specifies properties that affect various aspects of the deployment.
            </param>
            <param name="cancellationToken">
            Optional <see cref="T:System.Threading.CancellationToken"/> that can be used to indicate that the operation should be cancelled.
            Use of this object does not guarantee that the operation will be cancelled.
            </param>
            <exception cref="T:System.ArgumentException">
            If the value for any of the required parameters is a null reference or an empty string.
            </exception>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">
            If <paramref name="upgradeExisting"/> is true and the target database exists;
            or if an error occurs during deployment.
            </exception>
            <exception cref="T:System.OperationCanceledException">
            If the <see cref="T:System.Threading.CancellationToken"/> has a cancellation requested and the operation could be cancelled.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServices.GenerateDeployScript(Microsoft.SqlServer.Dac.DacPackage,System.String,Microsoft.SqlServer.Dac.DacDeployOptions,System.Nullable{System.Threading.CancellationToken})">
            <summary>
            Create T-SQL script that can be used to deploy the schema of the supplied <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> to a database.
            </summary>
            <param name="package">
            <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> containing schema to be deployed.
            </param>
            <param name="targetDatabaseName">
            Name of the target database for deployment.
            </param>
            <param name="options">
            Instance of <see cref="T:Microsoft.SqlServer.Dac.DacDeployOptions"/> that specifies properties that affect various aspects of the deployment script creation.
            </param>
            <param name="cancellationToken">
            Optional <see cref="T:System.Threading.CancellationToken"/> that can be used to indicate that the operation should be cancelled.
            Use of this object does not guarantee that the operation will be cancelled.
            </param>
            <returns>
            String of T-SQL script used to create or update database schema based on the supplied <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/>.
            </returns>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">
            If a problem occurs during script generation.
            </exception>
            <exception cref="T:System.OperationCanceledException">
            If the <see cref="T:System.Threading.CancellationToken"/> has a cancellation requested and the operation could be cancelled.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServices.GenerateDeployReport(Microsoft.SqlServer.Dac.DacPackage,System.String,Microsoft.SqlServer.Dac.DacDeployOptions,System.Nullable{System.Threading.CancellationToken})">
            <summary>
            Create XML report of the steps needed to deploy the schema of the supplied <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> to a database.
            </summary>
            <param name="package">
            <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> containing schema to be deployed.
            </param>
            <param name="targetDatabaseName">
            Name of the target database for deployment.
            </param>
            <param name="options">
            Instance of <see cref="T:Microsoft.SqlServer.Dac.DacDeployOptions"/> that specifies properties that affect various aspects of the deployment report creation.
            </param>
            <param name="cancellationToken">
            Optional <see cref="T:System.Threading.CancellationToken"/> that can be used to indicate that the operation should be cancelled.
            Use of this object does not guarantee that the operation will be cancelled.
            </param>
            <returns>
            String of XML that details the steps of the package deployment.
            </returns>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">
            If a problem occurs during report generation.
            </exception>
            <exception cref="T:System.OperationCanceledException">
            If the <see cref="T:System.Threading.CancellationToken"/> has a cancellation requested and the operation could be cancelled.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServices.CreateController(Microsoft.Data.Tools.Schema.Sql.Deployment.SqlDeployment,Microsoft.Data.Tools.Schema.ErrorManager)">
            <summary>
            Creates an <see cref="T:Microsoft.Data.Tools.Schema.Sql.Deployment.IDeploymentController"/>, handling any errors thrown during contstruction
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServices.GenerateUniqueScriptFileName(System.String,System.Boolean)">
            <summary>
            Generate unique filename for a script
            </summary>
            <param name="databaseName">The target database name</param>
            <param name="isMaster">Is this the master database script</param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServices.GenerateDriftReport(System.String,System.Nullable{System.Threading.CancellationToken})">
            <summary>
            Create XML report of the drift that has occurred since the database was last registered.
            </summary>
            <param name="targetDatabaseName">
            Name of the target database for deployment.
            </param>
            <param name="cancellationToken">
            Optional <see cref="T:System.Threading.CancellationToken"/> that can be used to indicate that the operation should be cancelled.
            Use of this object does not guarantee that the operation will be cancelled.
            </param>
            <returns>
            String of XML that details the database drift, or null if the database has not been registered.
            </returns>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">
            If a problem occurs during report generation.
            </exception>
            <exception cref="T:System.OperationCanceledException">
            If the <see cref="T:System.Threading.CancellationToken"/> has a cancellation requested and the operation could be cancelled.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServices.GenerateDriftReport(System.String,Microsoft.SqlServer.Dac.DacSchemaModelStorageType,System.Nullable{System.Threading.CancellationToken})">
            <summary>
            Create XML report of the drift that has occurred since the database was last registered.
            </summary>
            <param name="targetDatabaseName">
            Name of the target database for deployment.
            </param>
            <param name="modelStorageType">
            Specifies the type of backing storage for a schema model.
            </param>
            <param name="cancellationToken">
            Optional <see cref="T:System.Threading.CancellationToken"/> that can be used to indicate that the operation should be cancelled.
            Use of this object does not guarantee that the operation will be cancelled.
            </param>
            <returns>
            String of XML that details the database drift, or null if the database has not been registered.
            </returns>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">
            If a problem occurs during report generation.
            </exception>
            <exception cref="T:System.OperationCanceledException">
            If the <see cref="T:System.Threading.CancellationToken"/> has a cancellation requested and the operation could be cancelled.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServices.Register(System.String,System.String,System.Version,System.String)">
            <summary>
            Add DAC registration information for the specified target database.
            </summary>
            <param name="targetDatabaseName">
            Name of the database for which to add registration information.
            </param>
            <param name="applicationName">
            String identifier for the DAC application.
            </param>
            <param name="applicationVersion">
            Version of the DAC application.
            </param>
            <param name="applicationDescription">
            Optional string summary of the DAC application.
            </param>
            <exception cref="T:System.ArgumentException">
            If any of the required arguments are null or zero-length strings.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServices.Register(System.String,Microsoft.SqlServer.Dac.DacSchemaModelStorageType,System.String,System.Version,System.String)">
            <summary>
            Add DAC registration information for the specified target database.
            </summary>
            <param name="targetDatabaseName">
            Name of the database for which to add registration information.
            </param>
            <param name="modelStorageType">
            Specifies the type of backing storage for a schema model.
            </param>
            <param name="applicationName">
            String identifier for the DAC application.
            </param>
            <param name="applicationVersion">
            Version of the DAC application.
            </param>
            <param name="applicationDescription">
            Optional string summary of the DAC application.
            </param>
            <exception cref="T:System.ArgumentException">
            If any of the required arguments are null or zero-length strings.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServices.Unregister(System.String)">
            <summary>
            Remove DAC registration information for the specified target database.
            </summary>
            <param name="targetDatabaseName">
            Name of the database for which to remove registration information.
            </param>
            <exception cref="T:System.ArgumentException">
            If <paramref name="targetDatabaseName"/> is null or a zero-length string.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServices.ExportBacpac(System.String,System.String,System.Collections.Generic.IEnumerable{System.Tuple{System.String,System.String}},System.Nullable{System.Threading.CancellationToken})">
            <summary>
            Extract schema and export data from a database into a "bacpac" package.
            </summary>
            <param name="packageFileName">
            Path of the target package file.
            </param>
            <param name="databaseName">
            Name of the source database.
            </param>
            <param name="tables">
            <para>
            Optional enumerable used to retrieve enumerator over set of tables for which data should be exported.
            For each <see cref="T:System.Tuple"/> in the enumeration the first item specifies the schema of the table, and the second specifies the base identifier of the table.
            </para>
            <para>
            If the value for this parameter is a null reference, data for all tables will be exported.
            </para>
            </param>
            <param name="cancellationToken">
            Optional <see cref="T:System.Threading.CancellationToken"/> that can be used to indicate that the operation should be cancelled.
            Use of this object does not guarantee that the operation will be cancelled.
            </param>
            <exception cref="T:System.ArgumentException">
            If the value for any of the required parameters is a null reference or an empty string.
            </exception>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">
            If an error occurs during schema deployment and data export;
            or if <paramref name="tables"/> specifies a table that does not exist in the schema contained in the supplied package.
            </exception>
            <exception cref="T:System.OperationCanceledException">
            If the <see cref="T:System.Threading.CancellationToken"/> has a cancellation requested and the operation could be cancelled.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServices.ExportBacpac(System.String,System.String,Microsoft.SqlServer.Dac.DacSchemaModelStorageType,System.Collections.Generic.IEnumerable{System.Tuple{System.String,System.String}},System.Nullable{System.Threading.CancellationToken})">
            <summary>
            Extract schema and export data from a database into a "bacpac" package.
            </summary>
            <param name="packageFileName">
            Path of the target package file.
            </param>
            <param name="databaseName">
            Name of the source database.
            </param>
            <param name="modelStorageType">
            Specifies the type of backing storage for a schema model.
            </param>
            <param name="tables">
            <para>
            Optional enumerable used to retrieve enumerator over set of tables for which data should be exported.
            For each <see cref="T:System.Tuple"/> in the enumeration the first item specifies the schema of the table, and the second specifies the base identifier of the table.
            </para>
            <para>
            If the value for this parameter is a null reference, data for all tables will be exported.
            </para>
            </param>
            <param name="cancellationToken">
            Optional <see cref="T:System.Threading.CancellationToken"/> that can be used to indicate that the operation should be cancelled.
            Use of this object does not guarantee that the operation will be cancelled.
            </param>
            <exception cref="T:System.ArgumentException">
            If the value for any of the required parameters is a null reference or an empty string.
            </exception>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">
            If an error occurs during schema deployment and data export;
            or if <paramref name="tables"/> specifies a table that does not exist in the schema contained in the supplied package.
            </exception>
            <exception cref="T:System.OperationCanceledException">
            If the <see cref="T:System.Threading.CancellationToken"/> has a cancellation requested and the operation could be cancelled.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServices.ExportBacpac(System.String,System.String,Microsoft.SqlServer.Dac.DacExportOptions,System.Collections.Generic.IEnumerable{System.Tuple{System.String,System.String}},System.Nullable{System.Threading.CancellationToken})">
            <summary>
            Extract schema and export data from a database into a "bacpac" package.
            </summary>
            <param name="packageFileName">
            Path of the target package file.
            </param>
            <param name="databaseName">
            Name of the source database.
            </param>
            <param name="options">
             Instance of <see cref="T:Microsoft.SqlServer.Dac.DacExportOptions"/> that specifies properties that affect various aspects of the export.
            </param>
            <param name="tables">
            Optional enumerable used to retrieve enumerator over set of tables for which data should be exported.
            For each <see cref="T:System.Tuple"/> in the enumeration the first item specifies the schema of the table, and the second specifies the base identifier of the table.
            </param>
            <param name="cancellationToken">
            Optional <see cref="T:System.Threading.CancellationToken"/> that can be used to indicate that the operation should be cancelled.
            Use of this object does not guarantee that the operation will be cancelled.
            </param>
            <exception cref="T:System.ArgumentException">
            If the value for any of the required parameters is a null reference or an empty string.
            </exception>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">
            If an error occurs during schema deployment and data export;
            or if <paramref name="options"/> specifies a table that does not exist in the schema contained in the supplied package.
            </exception>
            <exception cref="T:System.OperationCanceledException">
            If the <see cref="T:System.Threading.CancellationToken"/> has a cancellation requested and the operation could be cancelled.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServices.ExportBacpac(System.IO.Stream,System.String,System.Collections.Generic.IEnumerable{System.Tuple{System.String,System.String}},System.Nullable{System.Threading.CancellationToken})">
            <summary>
            Extract schema and export data from a database into a "bacpac" package.
            </summary>
            <param name="packageStream">
            <see cref="T:System.IO.Stream"/> to which to write the package.
            </param>
            <param name="databaseName">
            Name of the source database.
            </param>
            <param name="tables">
            <para>
            Optional enumerable used to retrieve enumerator over set of tables for which data should be exported.
            For each <see cref="T:System.Tuple"/> in the enumeration the first item specifies the schema of the table, and the second specifies the base identifier of the table.
            </para>
            <para>
            If the value for this parameter is a null reference, data for all tables will be exported.
            </para>
            </param>
            <param name="cancellationToken">
            Optional <see cref="T:System.Threading.CancellationToken"/> that can be used to indicate that the operation should be cancelled.
            Use of this object does not guarantee that the operation will be cancelled.
            </param>
            <exception cref="T:System.ArgumentException">
            If the value for any of the required parameters is a null reference or an empty string.
            </exception>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">
            If an error occurs during schema deployment and data export;
            or if <paramref name="tables"/> specifies a table that does not exist in the schema contained in the supplied package;
            or the supplied stream is not suitable for writing the package.
            </exception>
            <exception cref="T:System.OperationCanceledException">
            If the <see cref="T:System.Threading.CancellationToken"/> has a cancellation requested and the operation could be cancelled.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServices.ExportBacpac(System.IO.Stream,System.String,Microsoft.SqlServer.Dac.DacSchemaModelStorageType,System.Collections.Generic.IEnumerable{System.Tuple{System.String,System.String}},System.Nullable{System.Threading.CancellationToken})">
            <summary>
            Extract schema and export data from a database into a "bacpac" package.
            </summary>
            <param name="packageStream">
            <see cref="T:System.IO.Stream"/> to which to write the package.
            </param>
            <param name="databaseName">
            Name of the source database.
            </param>
            <param name="modelStorageType">
            Specifies the type of backing storage for a schema model.
            </param>
            <param name="tables">
            <para>
            Optional enumerable used to retrieve enumerator over set of tables for which data should be exported.
            For each <see cref="T:System.Tuple"/> in the enumeration the first item specifies the schema of the table, and the second specifies the base identifier of the table.
            </para>
            <para>
            If the value for this parameter is a null reference, data for all tables will be exported.
            </para>
            </param>
            <param name="cancellationToken">
            Optional <see cref="T:System.Threading.CancellationToken"/> that can be used to indicate that the operation should be cancelled.
            Use of this object does not guarantee that the operation will be cancelled.
            </param>
            <exception cref="T:System.ArgumentException">
            If the value for any of the required parameters is a null reference or an empty string.
            </exception>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">
            If an error occurs during schema deployment and data export;
            or if <paramref name="tables"/> specifies a table that does not exist in the schema contained in the supplied package;
            or the supplied stream is not suitable for writing the package.
            </exception>
            <exception cref="T:System.OperationCanceledException">
            If the <see cref="T:System.Threading.CancellationToken"/> has a cancellation requested and the operation could be cancelled.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServices.ExportBacpac(System.IO.Stream,System.String,Microsoft.SqlServer.Dac.DacExportOptions,System.Collections.Generic.IEnumerable{System.Tuple{System.String,System.String}},System.Nullable{System.Threading.CancellationToken})">
            <summary>
            Extract schema and export data from a database into a "bacpac" package.
            </summary>
            <param name="packageStream">
            <see cref="T:System.IO.Stream"/> to which to write the package.
            </param>
            <param name="databaseName">
            Name of the source database.
            </param>
            <param name="options">
            Optional instance of <see cref="T:Microsoft.SqlServer.Dac.DacExportOptions"/> that specifies properties that affect various aspects of the export.
            </param>
            <param name="tables">
            Optional enumerable used to retrieve enumerator over set of tables for which data should be exported.
            For each <see cref="T:System.Tuple"/> in the enumeration the first item specifies the schema of the table, and the second specifies the base identifier of the table.
            </param>
            <param name="cancellationToken">
            Optional <see cref="T:System.Threading.CancellationToken"/> that can be used to indicate that the operation should be cancelled.
            Use of this object does not guarantee that the operation will be cancelled.
            </param>
            <exception cref="T:System.ArgumentException">
            If the value for any of the required parameters is a null reference or an empty string.
            </exception>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">
            If an error occurs during schema deployment and data export;
            or if <paramref name="options"/> specifies a table that does not exist in the schema contained in the supplied package.
            </exception>
            <exception cref="T:System.OperationCanceledException">
            If the <see cref="T:System.Threading.CancellationToken"/> has a cancellation requested and the operation could be cancelled.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServices.SetAmbientSetting(System.String,System.Object)">
            <summary>
            Populates ambient setting controlling
            deployment/retry behavior down the stack.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServices.CreateSettingsContext(Microsoft.SqlServer.Dac.DacLoggingContext)">
            <summary>
            Sets up a stack context to push a configured settings object to populate
            the ambient settings for consumption further down the stack
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServices.ImportBacpac(Microsoft.SqlServer.Dac.BacPackage,System.String,System.Nullable{System.Threading.CancellationToken})">
            <summary>
            Deploy schema and import table data from the supplied package to a database.
            </summary>
            <param name="package">
            <see cref="T:Microsoft.SqlServer.Dac.BacPackage"/> containing schema to be deployed and data to be imported.
            </param>
            <param name="targetDatabaseName">
            Name of the target database for deployment.
            </param>
            <param name="cancellationToken">
            Optional <see cref="T:System.Threading.CancellationToken"/> that can be used to indicate that the operation should be cancelled.
            Use of this object does not guarantee that the operation will be cancelled.
            </param>
            <exception cref="T:System.ArgumentException">
            If the value for any of the required parameters is a null reference or an empty string.
            </exception>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">
            If an error occurs during schema deployment and data import.
            </exception>
            <exception cref="T:System.OperationCanceledException">
            If the <see cref="T:System.Threading.CancellationToken"/> has a cancellation requested and the operation could be cancelled.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServices.ImportBacpac(Microsoft.SqlServer.Dac.BacPackage,System.String,Microsoft.SqlServer.Dac.DacAzureDatabaseSpecification,System.Nullable{System.Threading.CancellationToken})">
            <summary>
            Deploy schema and import table data from the supplied package to a database.
            </summary>
            <param name="package">
            <see cref="T:Microsoft.SqlServer.Dac.BacPackage"/> containing schema to be deployed and data to be imported.
            </param>
            <param name="targetDatabaseName">
            Name of the target database for deployment.
            </param>
            <param name="creationDefaults">
            Optional default size and edition parameters used when creating a new Azure database.
            </param>
            <param name="cancellationToken">
            Optional <see cref="T:System.Threading.CancellationToken"/> that can be used to indicate that the operation should be cancelled.
            Use of this object does not guarantee that the operation will be cancelled.
            </param>
            <exception cref="T:System.ArgumentException">
            If the value for any of the required parameters is a null reference or an empty string.
            </exception>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">
            If an error occurs during schema deployment and data import.
            </exception>
            <exception cref="T:System.OperationCanceledException">
            If the <see cref="T:System.Threading.CancellationToken"/> has a cancellation requested and the operation could be cancelled.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServices.ImportBacpac(Microsoft.SqlServer.Dac.BacPackage,System.String,Microsoft.SqlServer.Dac.DacImportOptions,System.Nullable{System.Threading.CancellationToken})">
            <summary>
            Deploy schema and import table data from the supplied package to a database.
            </summary>
            <param name="package">
            <see cref="T:Microsoft.SqlServer.Dac.BacPackage"/> containing schema to be deployed and data to be imported.
            </param>
            <param name="targetDatabaseName">
            Name of the target database for deployment.
            </param>
            <param name="importOptions">
             Instance of <see cref="T:Microsoft.SqlServer.Dac.DacImportOptions"/> that specifies properties that affect various aspects of the import.
            </param>
            <param name="cancellationToken">
            Optional <see cref="T:System.Threading.CancellationToken"/> that can be used to indicate that the operation should be cancelled.
            Use of this object does not guarantee that the operation will be cancelled.
            </param>
            <exception cref="T:System.ArgumentException">
            If the value for any of the required parameters is a null reference or an empty string.
            </exception>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">
            If an error occurs during schema deployment and data import.
            </exception>
            <exception cref="T:System.OperationCanceledException">
            If the <see cref="T:System.Threading.CancellationToken"/> has a cancellation requested and the operation could be cancelled.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServices.SafeFileStreamGetter(System.String,System.IO.FileMode,System.IO.FileAccess,System.IO.FileShare,System.String)">
            <summary>
            Return FileStream after handling all acceptable exceptions.
            </summary>
            <param name="path">File path.</param>
            <param name="mode">File mode.</param>
            <param name="access">File access.</param>
            <param name="share">File share.</param>
            <param name="handledExceptionMessage">Message for handled exception.</param>
            <returns></returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServices.SafeFileAction(System.Action,System.String)">
            <summary>
            Catches common error cases when doing I/O operations and throws a <see cref="T:Microsoft.SqlServer.Dac.DacServicesException"/> with a predefined error message
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServices.GenerateCreateScript(Microsoft.SqlServer.Dac.DacPackage,System.String,Microsoft.SqlServer.Dac.DacDeployOptions)">
            <summary>
            Create T-SQL script that can be used to deploy the schema of the supplied <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> to a database.
            </summary>
            <param name="package">
            <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> containing schema to be deployed.
            </param>
            <param name="targetDatabaseName">
            Name of the target database for deployment.
            </param>
            <param name="options">
            Instance of <see cref="T:Microsoft.SqlServer.Dac.DacDeployOptions"/> that specifies properties that affect various aspects of the deployment script creation.
            </param>
            <returns>
            String of T-SQL script used to create database schema based on the supplied <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/>.
            </returns>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">
            If a problem occurs during script generation.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServices.GenerateCreateScript(System.IO.Stream,Microsoft.SqlServer.Dac.DacPackage,System.String,Microsoft.SqlServer.Dac.DacDeployOptions)">
            <summary>
            Create T-SQL script that can be used to deploy the schema of the supplied <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> to a database.
            </summary>
            <param name="outputStream">
            <see cref="T:System.IO.Stream"/> to which to write the deployment script.
            </param>
            <param name="package">
            <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> containing schema to be deployed.
            </param>
            <param name="targetDatabaseName">
            Name of the target database for deployment.
            </param>
            <param name="options">
            Instance of <see cref="T:Microsoft.SqlServer.Dac.DacDeployOptions"/> that specifies properties that affect various aspects of the deployment script creation.
            </param>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">
            If a problem occurs during script generation.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServices.GenerateDeployScript(Microsoft.SqlServer.Dac.DacPackage,Microsoft.SqlServer.Dac.DacPackage,System.String,Microsoft.SqlServer.Dac.DacDeployOptions)">
            <summary>
            Create T-SQL script that can be used to deploy the differences between the schemas of the supplied source and target <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> instances to a database.
            </summary>
            <param name="sourcePackage">
            <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> containing the source schema to be compared.
            </param>
            <param name="targetPackage">
            <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> containing the target schema to be compared.
            </param>
            <param name="targetDatabaseName">
            Name of the target database for deployment.
            </param>
            <param name="options">
            Instance of <see cref="T:Microsoft.SqlServer.Dac.DacDeployOptions"/> that specifies properties that affect various aspects of the deployment script creation.
            </param>
            <returns>
            String of T-SQL script used to create or update database schema based on the supplied <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/>.
            </returns>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">
            If a problem occurs during script generation.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServices.GenerateDeployScript(System.IO.Stream,Microsoft.SqlServer.Dac.DacPackage,Microsoft.SqlServer.Dac.DacPackage,System.String,Microsoft.SqlServer.Dac.DacDeployOptions)">
            <summary>
            Create T-SQL script that can be used to deploy the differences between the schemas of the supplied source and target <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> instances to a database.
            </summary>
            <param name="outputStream">
            <see cref="T:System.IO.Stream"/> to which to write the deployment script.
            </param>
            <param name="sourcePackage">
            <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> containing the source schema to be compared.
            </param>
            <param name="targetPackage">
            <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> containing the target schema to be compared.
            </param>
            <param name="targetDatabaseName">
            Name of the target database for deployment.
            </param>
            <param name="options">
            Instance of <see cref="T:Microsoft.SqlServer.Dac.DacDeployOptions"/> that specifies properties that affect various aspects of the deployment script creation.
            </param>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">
            If a problem occurs during script generation.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServices.GenerateDeployReport(Microsoft.SqlServer.Dac.DacPackage,Microsoft.SqlServer.Dac.DacPackage,System.String,Microsoft.SqlServer.Dac.DacDeployOptions)">
            <summary>
            Create XML report of the steps needed to deploy the differences between the schemas of the supplied source and target <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> instances to a database.
            </summary>
            <param name="sourcePackage">
            <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> containing the source schema to be compared.
            </param>
            <param name="targetPackage">
            <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> containing the target schema to be compared.
            </param>
            <param name="targetDatabaseName">
            Name of the target database for deployment.
            </param>
            <param name="options">
            Instance of <see cref="T:Microsoft.SqlServer.Dac.DacDeployOptions"/> that specifies properties that affect various aspects of the deployment report creation.
            </param>
            <returns>
            String of XML that details the steps of the deployment.
            </returns>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">
            If a problem occurs during report generation.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServices.GenerateDeployReport(System.IO.Stream,Microsoft.SqlServer.Dac.DacPackage,Microsoft.SqlServer.Dac.DacPackage,System.String,Microsoft.SqlServer.Dac.DacDeployOptions)">
            <summary>
            Create XML report of the steps needed to deploy the differences between the schemas of the supplied source and target <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> instances to a database.
            </summary>
            <param name="outputStream">
            <see cref="T:System.IO.Stream"/> to which to write the deployment report.
            </param>
            <param name="sourcePackage">
            <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> containing the source schema to be compared.
            </param>
            <param name="targetPackage">
            <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> containing the target schema to be compared.
            </param>
            <param name="targetDatabaseName">
            Name of the target database for deployment.
            </param>
            <param name="options">
            Instance of <see cref="T:Microsoft.SqlServer.Dac.DacDeployOptions"/> that specifies properties that affect various aspects of the deployment report creation.
            </param>
            <exception cref="T:Microsoft.SqlServer.Dac.DacServicesException">
            If a problem occurs during report generation.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServices.ParseAndThrowIfUnsupportedConnectionStringBuilder(Microsoft.Data.Tools.Schema.Common.SqlClient.SqlConnectionFactory)">
            <summary>
            Evaluate the connection factory and determine if supplied connection factory is valid and supported by <see cref="T:Microsoft.SqlServer.Dac.DacServices"/>.
            </summary>
            <param name="connectionFactory">
            Connection factory to be validated.
            </param>
            <returns>Validated connection factory with only supported arguments present.</returns>
            <exception cref="T:System.ArgumentException">
            If the supplied <paramref name="connectionFactory"/> is not valid or if it specifies properties 
            or property values that are not supported by <see cref="T:Microsoft.SqlServer.Dac.DacServices"/>.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DacServices.ProbeIsolatedStorageAndSetAppDomainEvidenceIfNeccessary">
            <summary>
            Some CLR hosts do not set the AppDomain Evidence which is required for IsolatedStorage to function properly.  This 
            method probes if isolated storage is usable for the current user.  If isolated storage is not usable, it will attempt 
            to fix this by setting the AppDomain Evidence using private reflection.  Fixing isolated storage is a best effort
            attempt.  This method swallows all exceptions and lets the program proceed.
            </summary>cd
        </member>
        <member name="E:Microsoft.SqlServer.Dac.DacServices.ProgressChanged">
            <summary>
            Invoked as the state of an operation changes.
            </summary>
        </member>
        <member name="E:Microsoft.SqlServer.Dac.DacServices.Message">
            <summary>
            Invoked as an operation reports status updates or errors.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Data.DataException">
            <summary>
            This class is meant to be a public exception class - i.e. when throwing it ensure
            that the exception is meaningful to the end-developer.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Data.DataResources">
            <summary>
              A strongly-typed resource class, for looking up localized strings, etc.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Data.DataResources.ResourceManager">
            <summary>
              Returns the cached ResourceManager instance used by this class.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Data.DataResources.Culture">
            <summary>
              Overrides the current thread's CurrentUICulture property for all
              resource lookups using this strongly typed resource class.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Data.DataResources.CreateTargetModelFailed">
            <summary>
              Looks up a localized string similar to Failed to retrieve information from target database {0}.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Data.DataResources.DataPlanExecutionFailed">
            <summary>
              Looks up a localized string similar to Data plan execution failed with message {0}.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Data.DataResources.FailedDetectDspType">
            <summary>
              Looks up a localized string similar to Failed to retrieve information from target database to correctly model the database.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Data.DataResources.Skipped_SelectedColumn">
            <summary>
              Looks up a localized string similar to Excluded column [{0}].[{1}].[{2}] does not exist in the source model..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Data.DataResources.Skipped_SelectedTable">
            <summary>
              Looks up a localized string similar to Selected table [{0}].[{1}] does not have data and will not be populated..
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.DatabasePointer">
            <summary>
            Logically represents a database.  Can be used to retrieve information about the database
            such as a model and data
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.DatabasePointer.AddNewConstraints(Microsoft.Data.Tools.Schema.Sql.Deployment.ConstraintManager,Microsoft.Data.Tools.Schema.Common.SqlClient.SqlConnectionFactory)">
            <summary>
            Adds new constraints to the specified constraint manager.  Will throw a DataException if a error
            occurs with the connection to the DB
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.Data.DataDeployment">
            <summary>
            Represents a "top of stack" incremental data deployment engine.  This engine acts primarly as an orchestrator
            between other more fine-grained data deployment components.  It is meant to be a fire-and-dispose component, access to and control of 
            more fine grained components is left to direct manipulation of those components directly to avoid lifetime issues
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.Data.DataDeploymentOptions.AddSelectedTable(System.Tuple{System.String,System.String})">
            <summary>
            Adds a table to be considered when creating the data deployment plan
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.Data.DataDeploymentOptions.TableSelectionPolicy">
            <summary>
            Configures how tables will be selected for data deployment
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.Data.DataDeploymentOptions.StorageType">
            <summary>
            Storage to use when creating models of the source/target databases
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Deployment.Data.DataDeploymentOptions.TargetDatabaseName">
            <summary>
            Name of the target database.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.Data.DataPlanHandle">
            <summary>
            This class represents the disposable parts of the deployment plan.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.Data.DataPlanStrategy">
            <summary>
            Base class for different data deployment plan generation strategies
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.Data.PlanCreationContext">
            <summary>
            A data transfer object used to pass state between components used in plan creation
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.Data.PlanCreationContext.PopulateIncludedTables(System.Collections.Generic.HashSet{Microsoft.Data.Tools.Schema.Sql.SchemaModel.SqlElementDescriptor})">
             <summary>
             Called to populate selected data tables and columns based on
             policy specified in the options
            
             Assumption: the Options and Source model are populted before this method is called
             </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Deployment.Data.RipReplaceStrategy.AddToListIfNeeded(System.Collections.Generic.List{Microsoft.SqlServer.Dac.Deployment.Data.RipReplaceStrategy.GraphElem}@,Microsoft.Data.Tools.Schema.SchemaModel.IModelElement,Microsoft.SqlServer.Dac.Deployment.Data.RipReplaceStrategy.GraphElem)">
            <summary>
            This method adds new element to the list of schema-bound objects we're about to drop and re-create.
            If the input element is not present in the list, we create a new graph node and establish
            parent-child relationships. If already in the list, we just update parent-child relationship lists.
            </summary>
            <param name="list"></param>
            <param name="modelObject"></param>
            <param name="child"></param>
            <returns></returns>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Deployment.PlanExecutor">
            <summary>
            Executes a deployment plan against the specified target database
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Data.LocalDb.LocalDbInstanceException">
            <summary>
            Thrown by the DeveloperInstanceManager 
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Data.LocalDb.LocalDbInstanceManager">
            <summary>
            This class encapsulates dealing with the Serverless SQL Express technology SqlStudio uses
            as a default destination for database project deployment 
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Data.LocalDb.LocalDbInstanceManager.CreateLocaldbInstanceName(System.String)">
            <summary>
            Returns a localdb instance named based on the specified named.  The returned
            name is in the format of (localdb)\namePrefix
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Data.LocalDb.LocalDbInstanceManager.CreateInstance(System.String)">
            <summary>
            If necessary creates and then starts the specified instance and returns a connection string to connect 
            to master on the specified localdb instance.
            </summary>
            <returns>
            Returns a connection string to connect to the database.  Will throw DeveloperInstanceException
            if localdb is not installed or if an error occurs during creation of the connection string
            </returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Data.LocalDb.LocalDbInstanceManager.DetachDatabase(System.String,System.String)">
            <summary>
            If the specified database exists on the instance detach it from the instance.  
            Any connections/transactions open on the database will be closed as part of the detach.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Data.LocalDb.LocalDbInstanceManager.StopInstance(System.String)">
            <summary>
            Stops the specified instance if it is running
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Data.LocalDb.LocalDbInstanceManager.TeardownInstance(System.String)">
            <summary>
            Tears down an instance by stopping and then deleting the specified instance.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Data.LocalDb.LocalDbInstanceManager.CreateConnectionString(System.String)">
            <summary>
            Helper method that creates a connection string to 
            connect to the specified data source
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Data.LocalDb.LocalDbInstanceManager.ThrowCouldNotSetup">
            <summary>
            Helper method that throws the well known "could not setup" exception
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Data.LocalDb.LocalDbInstanceManager.CreateSafeInstanceName(System.String)">
            <summary>
            Helper to create a safe name prefix
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Data.LocalDb.LocalDbInstanceManager.DoesDatabaseExist(System.Data.SqlClient.SqlConnection,System.String)">
            <summary>
            Helper to check if a database exists
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Data.LocalDb.LocalDbInstanceManager.TestLocaldbConnectivityInstalled(System.String)">
            <summary>
            If not already tested, tests whether the localdb connectivity fix has been 
            installed.  This is a QFE ontop of .net framework 4.0.  It is assumed that the
            instance has already been started.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Data.LocalDb.LocalDbInstanceManager.SetupLocalDBInstance(System.String)">
            <summary>
            Sets up the LocalDB instance.  Returns named pipe if successful
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Data.LocalDb.LocalDbInstanceManager.BeginNewDatabaseWarmup(System.Data.SqlClient.SqlConnectionStringBuilder,System.String)">
            <summary>
            Helper method to "warmup" a new database after it has been created/attached
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Data.LocalDb.LocalDbInstanceManager.BuildCreateDatabase(System.String,System.String,System.String,System.IO.DirectoryInfo,System.IO.DirectoryInfo)">
            <summary>
            Creates an AST that represents a create database statement to create a database
            on a serverless instance
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Data.LocalDb.LocalDbInstanceManager.BuildDetachDatabase(System.String)">
            <summary>
            Builds an AST that will set the specified database to single user and detach it.
            </summary>
            <param name="dbName"></param>
            <returns></returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Data.LocalDb.LocalDbInstanceManager.BuildDropDatabase(System.String)">
            <summary>
            Creates an AST to drop a database
            </summary>
            <param name="databaseName"></param>
            <returns></returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Data.LocalDb.LocalDbInstanceManager.ExecuteScript(System.Data.SqlClient.SqlConnection,Microsoft.SqlServer.TransactSql.ScriptDom.TSqlScript)">
            <summary>
            Helper method that executes a set of batches against provided connection
            </summary>
            <param name="conn"></param>
            <param name="script"></param>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Data.LocalDb.LocalDbInstanceManager.LocalDbInstalled">
            <summary>
            Returns true is localDb is install on the user's machine
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Data.LocalDb.LocalDbInstanceManager.LocalDbWrapper">
            <summary>
            This class encalsulates management of LocalDB instances via the native control .dll
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Data.LocalDb.LocalDbInstanceManager.LocalDbWrapper.Create(System.String)">
            <summary>
            Creates a new LocalDB instance using the specified instance name
            </summary>
            <returns>
            True if the instance was created or already existed
            </returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Data.LocalDb.LocalDbInstanceManager.LocalDbWrapper.Start(System.String,System.String@)">
            <summary>
            Starts the specified instance.  
            </summary>
            <param name="instanceName">The name of an instance that was already created</param>
            <param name="namedPipe">The named pipe that can be used to communicate with the instance</param>
            <returns></returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Data.LocalDb.LocalDbInstanceManager.LocalDbWrapper.Stop(System.String)">
            <summary>
            Stops the specified instance
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Data.LocalDb.LocalDbInstanceManager.LocalDbWrapper.Delete(System.String)">
            <summary>
            Deletes the specified instance.  
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Data.LocalDb.LocalDbInstanceManager.LocalDbWrapper.VerifyInstalled">
            <summary>
            Helper method to verify that LocalDB is installed - it will throw if not installed.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Data.LocalDb.LocalDbInstanceManager.LocalDbWrapper.GetFunc``1(Microsoft.SqlServer.Dac.Data.LocalDb.LocalDbInstanceManager.LocalDbWrapper.SafeLibraryHandle,System.String)">
            <summary>
            Helper to return back the specified delegate to PInvoke the specified function
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Data.LocalDb.LocalDbInstanceManager.LocalDbWrapper.TryRetrieveApiLibPath(System.String,System.String@)">
            <summary>
            Helper method that looks in the registry to find the path to the control LocalDB library.
            The control library's constract specifies that the control library must be backwards compatible
            so we always load the latest instance of the control library and then specify the version we
            are conpatible with in subsequent calls into the library.  For instance, we may load LocalDB
            control library 12 and then specify that we want version 11 in a CreateInstance call.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.Data.LocalDb.LocalDbInstanceManager.LocalDbWrapper.Installed">
            <summary>
            Returns true is LocalDB is installed
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Data.LocalDb.LocalDbInstanceManager.LocalDbWrapper.ReturnCodes">
            <summary>
            Encapsulates return codes from LocalDB
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Data.LocalDb.LocalDbInstanceManager.LocalDbWrapper.SafeLibraryHandle">
            <summary>
            Wraps the safe handle to the native library
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Data.LocalDb.LocalDbInstanceManager.LocalDbWrapper.LocalDBApi">
            <summary>
            Encapsulates the delegates that define the signatures of the functions on the control library.  These
            delegates are used to successfully PInvoke into the .dll
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Data.LocalDb.LocalDbInstanceManager.LocalDbWrapper.LocalDBFunctionNames">
            <summary>
            Encapsulates the names of the functions on the controller .dll
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Data.LocalDb.LocalDbInstanceManager.LocalDbWrapper.NativeMethods">
            <summary>
            Additional functions that we PInvoke to manage loading the control .dll and
            find the control function addresses.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DeployOperation.UpdateDatabaseData(Microsoft.Data.Tools.Schema.Sql.Dac.LoggingContext,System.Threading.CancellationToken)">
            <summary>
            Update's the target database's data using the model's / data that has already be created.  Assumption - this
            method is called after the controller has been initialized and used to update the target database
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DeployOperation.SnapshotConstraintState">
            <summary>
            Snapshots constraint state in the target database prior to the database being updated
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.EngineVersion">
            <summary>
            Represents an option specifying what engine version should be set or allowed.
            Currently this option is only used in operations related to Microsoft Azure SQL Database.
            
            For instance this can be used during export to define the allowed engine version to validate against
            and whether the features of the database match the capabilities of that engine version.
            
            Similarly when defining creation options for a public TSqlModel in the extensibility APIs, this can be
            used to define what the expected engine version of the model should be set to.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.EngineVersion.Default">
            <summary>
            Use the default engine version when creating the model.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.EngineVersion.Latest">
            <summary>
            Use the latest engine version when creating the model. 
            This will always attempt to set the highest supported engine version as the
            target, and will mean that the model will allow the latest set of T-SQL language
            features to be supported 
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.EngineVersion.V11">
            <summary>
            Version 11 
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.EngineVersion.V12">
            <summary>
            Version 12
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.Extensions.DacExtensions">
            <summary>
            Provides extensions for interacting with DAC packages represented by <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> or <see cref="T:Microsoft.SqlServer.Dac.BacPackage"/> instances.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Extensions.DacExtensions.GetCollationString(Microsoft.SqlServer.Dac.DacPackage)">
            <summary>
            Returns the database collation for the package.
            </summary>
            <param name="package">
            <see cref="T:Microsoft.SqlServer.Dac.DacPackage"/> containing collation information.
            </param>
            <returns>
            The SQL Server collation string, or null if the collation cannot be retrieved.
            </returns>
            <exception cref="T:System.ArgumentException">
            If the value for any of the required parameters is a null reference.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Extensions.DacExtensions.GetCollationString(Microsoft.SqlServer.Dac.BacPackage)">
            <summary>
            Returns the database collation for the package.
            </summary>
            <param name="package">
            <see cref="T:Microsoft.SqlServer.Dac.BacPackage"/> containing collation information.
            </param>
            <returns>
            The SQL Server collation string, or null if the collation cannot be retrieved.
            </returns>
            <exception cref="T:System.ArgumentException">
            If the value for any of the required parameters is a null reference.
            </exception>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Extensions.DacExtensions.SetServiceSetting(Microsoft.SqlServer.Dac.DacServices,System.String,System.Object)">
            <summary>
            Configures a setting on the supplied DacServices instance.
            </summary>
            <param name="service">The services instance to apply the setting</param>
            <param name="settingName">The name of the setting</param>
            <param name="settingValue">The value of the setting or null to remove the setting</param>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.ExtractOperation.SchemaModel">
            <summary>
            Get <see cref="T:Microsoft.Data.Tools.Schema.SchemaModel.DataSchemaModel"/> instance that represents the extracted database schema.
            </summary>
            <value>
            <see cref="T:Microsoft.Data.Tools.Schema.SchemaModel.DataSchemaModel"/> instance created from extracted database schema.
            </value>
            <remarks>
            Use this property after executing this operation to retrieve the resulting model.
            Callers must handle disposal of this instance, as its lifetime is not managed by this class.
            </remarks>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.ModelValidation.CheckForUnsupportedAzureV1SchemaForBacpacData(Microsoft.Data.Tools.Schema.SchemaModel.DataSchemaModel,System.Collections.Generic.IEnumerable{Microsoft.Data.Tools.Schema.Sql.SchemaModel.SqlTableBase},System.Threading.CancellationToken,System.Action{Microsoft.SqlServer.Dac.DacMessage})">
            <summary>
            Determine if the supplied schema model contains any elements that are problematic
            when used with a package that contains data.
            </summary>
            <param name="model">
            <see cref="T:Microsoft.Data.Tools.Schema.SchemaModel.DataSchemaModel"/> to query for elements.
            </param>
            <param name="tables">
            Enumerable of data tables.
            </param>
            <param name="cancellationToken">
            <see cref="T:System.Threading.CancellationToken"/> that can be used to indicate that the operation should be cancelled.
            Use of this object does not guarantee that the operation will be cancelled.
            </param>
            <param name="errorHandler">
            Callback invoked when problematic elements are identified.
            A <see cref="T:Microsoft.SqlServer.Dac.DacMessage"/> instance is supplied that contains the details for the unsupported element.
            </param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.ModelValidation.CheckForSecurityPolicy(Microsoft.Data.Tools.Schema.SchemaModel.DataSchemaModel,System.Collections.Generic.IList{Microsoft.Data.Tools.Schema.Sql.SchemaModel.SqlTableBase},Microsoft.SqlServer.Dac.DacLoggingContext)">
            <summary>
            For platforms that support row-level security the exported rows set may be incomplete if the user
            is exporting a package under a database account that doesn't have enough privileges. Issue a warning
            so users can be aware of this situation
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.ModelValidation.CheckForUnmaskPermissionsNeeded(Microsoft.Data.Tools.Schema.SchemaModel.DataSchemaModel,System.Collections.Generic.IList{Microsoft.Data.Tools.Schema.Sql.SchemaModel.SqlTableBase},Microsoft.SqlServer.Dac.DacLoggingContext)">
            <summary>
            For platforms that support data masking the exported rows set may contain some masked data if the user
            is exporting a package under a database account that doesn't have enough privileges (UNMASK permission).
            Issue a warning so users can be aware of this situation.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.ObjectType">
            <summary>
            Defines object types that exist in SQL Server.
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.Aggregates">
            <summary>
            Aggregate objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.ApplicationRoles">
            <summary>
            Application role objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.Assemblies">
            <summary>
            Assembly objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.AssemblyFiles">
            <summary>
            Assembly files
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.AsymmetricKeys">
            <summary>
            Asymmetric key objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.BrokerPriorities">
            <summary>
            Broker priority objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.Certificates">
            <summary>
            Certificate objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.ColumnEncryptionKeys">
            <summary>
            Always Encrypted column encryption key objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.ColumnMasterKeys">
            <summary>
            Always Encrypted column master key objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.Contracts">
            <summary>
            Contract objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.DatabaseOptions">
            <summary>
            Database options
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.DatabaseRoles">
            <summary>
            Database role objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.DatabaseTriggers">
            <summary>
            Database DDL trigger objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.Defaults">
            <summary>
            Default objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.ExtendedProperties">
            <summary>
            Extended property objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.ExternalDataSources">
            <summary>
            External data source objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.ExternalFileFormats">
            <summary>
            External file format objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.ExternalTables">
            <summary>
            External table objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.Filegroups">
            <summary>
            Filegroup objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.FileTables">
            <summary>
            FileTable objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.FullTextCatalogs">
            <summary>
            Full-text catalog objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.FullTextStoplists">
            <summary>
            Full-text stoplist objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.MessageTypes">
            <summary>
            Message type objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.PartitionFunctions">
            <summary>
            Partition function objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.PartitionSchemes">
            <summary>
            Partition scheme objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.Permissions">
            <summary>
            Permission objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.Queues">
            <summary>
            Queue objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.RemoteServiceBindings">
            <summary>
            Remote service binding objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.RoleMembership">
            <summary>
            Role membership objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.Rules">
            <summary>
            Rule objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.ScalarValuedFunctions">
            <summary>
            Scalar valued function objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.SearchPropertyLists">
            <summary>
            Search property list objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.SecurityPolicies">
            <summary>
            Security policy objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.Sequences">
            <summary>
            Sequence objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.Services">
            <summary>
            Service objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.Signatures">
            <summary>
            Signature objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.StoredProcedures">
            <summary>
            Stored procedure objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.SymmetricKeys">
            <summary>
            Symmetric key objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.Synonyms">
            <summary>
            Synonym objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.Tables">
            <summary>
            Table objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.TableValuedFunctions">
            <summary>
            Table valued function objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.UserDefinedDataTypes">
            <summary>
            User defined data type (non-CLR) objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.UserDefinedTableTypes">
            <summary>
            User defined table type objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.ClrUserDefinedTypes">
            <summary>
            User defined type (CLR) objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.Users">
            <summary>
            User objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.Views">
            <summary>
            View objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.XmlSchemaCollections">
            <summary>
            Xml schema collection objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.Audits">
            <summary>
            Audit objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.Credentials">
            <summary>
            Credential objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.CryptographicProviders">
            <summary>
            Cryptographic provider objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.DatabaseAuditSpecifications">
            <summary>
            Database audit specification objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.DatabaseEncryptionKeys">
            <summary>
            Database encryption keys
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.DatabaseScopedCredentials">
            <summary>
            Database scoped credential objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.Endpoints">
            <summary>
            Endpoint objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.ErrorMessages">
            <summary>
            Error message objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.EventNotifications">
            <summary>
            Error notification objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.EventSessions">
            <summary>
            Event session objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.LinkedServerLogins">
            <summary>
            Linked server login objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.LinkedServers">
            <summary>
            Linked server objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.Logins">
            <summary>
            Login objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.MasterKeys">
            <summary>
            Master keys
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.Routes">
            <summary>
            Route objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.ServerAuditSpecifications">
            <summary>
            Server audit specification objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.ServerRoleMembership">
            <summary>
            Server role membership objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.ServerRoles">
            <summary>
            Server role objects
            </summary>
        </member>
        <member name="F:Microsoft.SqlServer.Dac.ObjectType.ServerTriggers">
            <summary>
            Server DDL trigger objects
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Operation.#ctor(System.String,System.Action{System.Object,System.Threading.CancellationToken})">
            <summary>
            Construct a new instance of the <see cref="T:Microsoft.SqlServer.Dac.Operation"/> class.
            </summary>
            <param name="caption">
            String describing the operation, suitable for display to user.
            </param>
            <param name="action">
            Delegate to invoke when the operation is executed.
            
            <para>
            The first parameter of the delegate is an opaque object that represents the operation.
            A concrete example of its usage is as the sender for events fired (indirectly) by this operation
            in order to correlate these events to the operation.
            </para>
            <para>
            The second parameter is a nullable <see cref="T:System.Threading.CancellationToken"/> that can be used
            to signal that the operation should be cancelled.
            </para>
            </param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.Operation.ToString">
            <summary>
            Return string representation of this instalce.
            </summary>
            <returns>
            String caption for this <see cref="T:Microsoft.SqlServer.Dac.Operation"/> instance.
            </returns>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.OperationContext.OperationCancelled">
            <summary>
            Get boolean that indicates whether any operation associated with this context reported a cancellation.
            </summary>
            <value>
            True if an operation reported being cancelled; otherwise false.
            </value>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.OperationResources">
            <summary>
              A strongly-typed resource class, for looking up localized strings, etc.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.OperationResources.ResourceManager">
            <summary>
              Returns the cached ResourceManager instance used by this class.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.OperationResources.Culture">
            <summary>
              Overrides the current thread's CurrentUICulture property for all
              resource lookups using this strongly typed resource class.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.OperationResources.BacpacModelValidationCaption">
            <summary>
              Looks up a localized string similar to Validating schema model for data package.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.OperationResources.CreatingDeploymentPlanCaption">
            <summary>
              Looks up a localized string similar to Creating deployment plan.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.OperationResources.DeployCaption">
            <summary>
              Looks up a localized string similar to Deploying package to database.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.OperationResources.DisablingIndexesCaption">
            <summary>
              Looks up a localized string similar to Disabling indexes.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.OperationResources.EnablingIndexesCaption">
            <summary>
              Looks up a localized string similar to Enabling indexes.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.OperationResources.ExecutingDeploymentPlanCaption">
            <summary>
              Looks up a localized string similar to Executing deployment plan.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.OperationResources.ExportCaption">
            <summary>
              Looks up a localized string similar to Exporting data from database.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.OperationResources.GenerateDeployReportCaption">
            <summary>
              Looks up a localized string similar to Generating deployment report.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.OperationResources.GenerateDeployScriptCaption">
            <summary>
              Looks up a localized string similar to Generating deployment script.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.OperationResources.GenerateDriftReportCaption">
            <summary>
              Looks up a localized string similar to Generating drift report.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.OperationResources.HistoryUpdateDisabled">
            <summary>
              Looks up a localized string similar to The dac history table will not be updated..
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.OperationResources.ImportCaption">
            <summary>
              Looks up a localized string similar to Importing package schema and data into database.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.OperationResources.PackageCaption">
            <summary>
              Looks up a localized string similar to Packaging model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.OperationResources.ProcessingTable">
            <summary>
              Looks up a localized string similar to Processing table: {0}.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.OperationResources.RegisterCaption">
            <summary>
              Looks up a localized string similar to Registering metadata for database.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.OperationResources.RemoveLoginsMessage">
            <summary>
              Looks up a localized string similar to Removing references from users to logins.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.OperationResources.ReportDeploymentPlanCaption">
            <summary>
              Looks up a localized string similar to Reporting deployment plan.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.OperationResources.ResolverCaption">
            <summary>
              Looks up a localized string similar to Resolving references in schema model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.OperationResources.ReverseEngineerCaption">
            <summary>
              Looks up a localized string similar to Extracting schema from database.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.OperationResources.TranslateCaption">
            <summary>
              Looks up a localized string similar to Translating package.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.OperationResources.UnregisterCaption">
            <summary>
              Looks up a localized string similar to Unregistering metadata for database.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.OperationResources.ValidationCaption">
            <summary>
              Looks up a localized string similar to Validating schema model.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.OperationResources.VerifyingDeploymentPlanCaption">
            <summary>
              Looks up a localized string similar to Verifying deployment plan.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.OptionDescriptionAttribute">
            <summary>
            Customizes the description of an option.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.OptionDescriptionAttribute.#ctor(System.Type,System.String)">
            <summary>
            Creates a description for an option.
            </summary>
            <param name="resourceClassType">The resource class to extract the resource string from.</param>
            <param name="resourcePropertyName">The resource name to extract.</param>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.OptionDescriptionAttribute.Description">
            <summary>
            The description of the property.    
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.DeploymentPropertyAliasAttribute">
            <summary>
            This class supports the product infrastructure and is not intended to be used directly 
            from your code.
            Defines an alias for the deployment property when used for commandline property overriding
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.DeploymentPropertyAliasAttribute.#ctor(System.String)">
            <summary>
            Defines an alias for a property.
            </summary>
        </member>
        <member name="P:Microsoft.SqlServer.Dac.DeploymentPropertyAliasAttribute.Alias">
            <summary>
            Returns the alias
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.OptionDisplayNameAttribute">
            <summary>
            Customizes the display name of an option.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.OptionDisplayNameAttribute.#ctor(System.Type,System.String)">
            <summary>
            Creates a display name for an option.
            </summary>
            <param name="resourceClassType">The resource class to extract the resource string from.</param>
            <param name="resourcePropertyName">The resource name to extract.</param>        
        </member>
        <member name="P:Microsoft.SqlServer.Dac.OptionDisplayNameAttribute.DisplayName">
            <summary>
            The display name for the property.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.IPackageSource">
            <summary>
            Encapsulates the sourcing of package content, 
            and exposes methods to instantiate various types of objects used to read the package content.
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.IPackageSource.OpenSqlPackage">
            <summary>
            Opens a readonly <see cref="T:Microsoft.Data.Tools.Schema.Sql.Build.SqlPackage"/> for the source
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.IPackageSource.OpenSqlPackageForUpdate">
            <summary>
            Opens a <see cref="T:Microsoft.Data.Tools.Schema.Sql.Build.SqlPackage"/> for the source, with the
            package set to an updateable state
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.IPackageSource.GetInputStream">
            <summary>
            Return a stream that can be used to read the package content.
            This stream must be disposed when it is no longer needed.
            </summary>
            <returns>
            <see cref="T:System.IO.Stream"/> used to read package content.
            </returns>
            <remarks>
            This method is a workaround for creating <see cref="T:Microsoft.Data.Tools.Schema.Sql.Dac.Data.BacpacPackage"/> instances from streams.
            It should not be used to create objects that are returned from other methods in this interface.
            </remarks>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.ReportMessageOperation">
            <summary>
            Reports all DataSchemaErrors added to an ErrorManager through the supplied MessageHandler.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.UnownedStream">
            <summary>
            Decorator for <see cref="T:System.IO.Stream"/> that avoids disposal of the underlying stream.
            </summary>
        </member>
        <member name="T:Microsoft.SqlServer.Dac.SqlConnectionStringBuilderHelper">
            <summary>
            Public class to support SQL Authentication configuration for DacFx
            </summary>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.SqlConnectionStringBuilderHelper.IsAuthenticationSupported">
            <summary>
            Checks whether "Authentication" is supported in the runtime environment
            The keyword "Authentication" is not supported until .Net4.6. If user uses a version of .Net less than 4.6, DacFx should avoid using "Authentication"
            </summary>
            <returns>true if "Authentication" is present in current .Net version</returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.SqlConnectionStringBuilderHelper.SetAuthentication(System.Data.SqlClient.SqlConnectionStringBuilder,System.Data.SqlClient.SqlConnectionStringBuilder)">
            <summary>
            Set Authentication value from source builder to the target builder
            </summary>
            <param name="sourceBuilder">the source connection string builder</param>
            <param name="targetBuilder">the target connection string builder</param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.SqlConnectionStringBuilderHelper.SetAuthentication(System.Data.SqlClient.SqlConnectionStringBuilder,System.String)">
            <summary>
            Set Authentication using reflection
            </summary>
            <param name="sbConnectionString"></param>
            <param name="authenticationType"></param>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.SqlConnectionStringBuilderHelper.GetAuthenticationString(System.Data.SqlClient.SqlConnectionStringBuilder)">
            <summary>
            Get Authentication as string from connectionStringBuilder
            </summary>
            <param name="connectionStringBuilder"></param>
            <returns></returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.SqlConnectionStringBuilderHelper.IsAuthenticationSpecified(System.Data.SqlClient.SqlConnectionStringBuilder)">
            <summary>
            Determines whether a connection string builder has a value specified for the Authentication property.
            </summary>
            <param name="connectionStringBuilder">A connection string builder that might have authentication specified.</param>
            <returns>True if the authentication property is supported by the connection string builder and the authentication property is specified. False otherwise.</returns>
        </member>
        <member name="M:Microsoft.SqlServer.Dac.SqlConnectionStringBuilderHelper.GetConnectionStringWithAlwaysEncryptedSetting(System.Data.SqlClient.SqlConnectionStringBuilder,System.Boolean)">
            <summary>
            Sets AlwaysEncrypted setting in connection string if it is available in the .NET framework and returns the updated connection string
            No-op if there is not .NET 4.6
            </summary>
            <param name="connectionStringBuilder">A connection string builder that might have always encrypted setting specified.</param>
            <param name="enableAlwaysEncrypted">True, to enable always encrypted setting, else False</param>
            <returns>connection string with Column Encryption Setting set to Enabled or Disabled based on enableAlwaysEncrypted</returns>
        </member>
        <member name="T:AssemblyRef">
            <summary>
            Sets public key string for friend assemblies.
            </summary>
        </member>
        <member name="F:AssemblyRef.ProductPublicKey">
            <summary>No signing</summary>
        </member>
    </members>
</doc>

tools\dbatools\bin\smo\Microsoft.SqlServer.Diagnostics.Strace.dll

md5: 60A5B58D4811F7B789C46EA4A60C5D44 | sha1: E6AAE343BC4773003B778BF5093B614CDAE1A780 | sha256: 07513615219EC9F1D35F569F74F182F4A5DA7F993E7422EC3EBDA7236CC929DA | sha512: 8E2825B6A12AC3EBBF9182F37421B33139E71D1774F902A12D813F706D727E1ACCD1F0CB49972F0433CF91DD76D86667E3738AE8EDB22805763647BC48CCF9FD

tools\dbatools\bin\smo\Microsoft.SqlServer.Dmf.Common.dll

md5: F97ED27E3DFF82BB6916D9A7FCF4C96B | sha1: 619DD995541E9332B84B8ED78E67BA54EDCA1996 | sha256: 4A89D16E5729C78D05889392F92855B39B98CBABDB890593088EE70899E886DD | sha512: 13E9A1E31C20CA8DA65477016B686F22EE60801DDB81F20CE195D6521336231C45CB0505FCC162DEB6E4EB5FC97C1126937B935F90A6112B67BAC6EED72ABA86

tools\dbatools\bin\smo\Microsoft.SqlServer.Dmf.dll

md5: 8996E9E85A56CD6BE47185CB7EA7E054 | sha1: 040E099816CCD5C6894552B1F7FCF7D5938A86F9 | sha256: 359D48602701B565F9D78E88BDE599A8E57D900E80C4FF215EC953655C71F312 | sha512: 773726B775884F633CCCEFD9D4B44D9F004460EC2F3E6CDFC59B65C4AD80D1CEF3824B125B33BCC7AD1E15651D528C29618CCF1C5D8C8B58203DD0216FEDB71F

tools\dbatools\bin\smo\Microsoft.SqlServer.DmfSqlClrWrapper.dll

md5: 76CB51F60C62AED3179136345567052C | sha1: E5A923168B227C9161DB6EB325EFBBA98A29A593 | sha256: F1B48F092DD96FDCA48BF6D16CEA5087327EEA962D279A30CD1B221ECB295E97 | sha512: 6782765C846F97365DAE59F792851D555F83F6F3A8F8F754D827E59EA8BAF537B5D3D42156C4BDC16298EC06A39E3ABA27D8FCB2FE92581DF8F9A6922917A983

tools\dbatools\bin\smo\Microsoft.SqlServer.DtsServer.Interop.dll

md5: 217726D0FB27A5718769AF62538C1111 | sha1: E347612E002DD666D45BA10A8217D2A0847C2308 | sha256: 5633029110E2265F35B21BDB4A4A2561C260321A8C2F12C3BFC5A437E0B96A98 | sha512: 52CA20C1FF7A0E4294FD8DDCC859051E6296B9B4374E381BFC3990765F1B4998418EC361887518896D478D1FA41ABFBA7B7B3C5ABDACCBFD6220D355D6737E02

tools\dbatools\bin\smo\Microsoft.SqlServer.IntegrationServices.ClusterManagement.dll

md5: AD8E65431EB8DB24CF5FF5818F2EA91E | sha1: A32F02131517E57FCB83E22836FCB69BEE616959 | sha256: CFB08F61B05A200916FB0C38BF326582F1FA417D085DEFF558C27D65744FCAF8 | sha512: 6E4F1AC61A4A376FF77E1F269FF8840DA40E49CBB6D85960FCF1777BC08A917D90BE35D85FE10E10BB38F0E4A0DEE264B92D827AE7191012D81520C2B3442D76

tools\dbatools\bin\smo\Microsoft.SqlServer.IntegrationServices.ISServerDBUpgrade.dll

md5: 81246EDE8B7B4ABCA3A1E1E5BFD8E4DC | sha1: 38CB00A923BF9F895DDD5BAD9AA82D7135B55597 | sha256: E843499595D66EAAB818508EC84211735A49A7066965D5DC571FE2FA1E0ECCD8 | sha512: 475F646576E900C512BBDF2BC86C90F914FEA4F47F68951FE006FD8230F8D4E4F3BFA4198DE2C6EB62F541D2A9C86D9E040475D83821A75962F55A9741C1F296

tools\dbatools\bin\smo\Microsoft.SqlServer.IntegrationServices.Server.Common.dll

md5: D647ECCD24528FA56D7AC7BC8F2AE83E | sha1: 449020C537EC3194AAF257C1FC95D16430275263 | sha256: 12DE0550045DE4D9C9358FB8295529D293672E5B9E1C2B656A77B2D0F250D91D | sha512: 0E200918C96F4EBAAE6424F86890E256A1A78F14098C7111DC50A0D27CDC935B77D877AD816593CFDCD0BC5A1C86A02FC809A676B5C6083EAF5B8E6CD7A83005

tools\dbatools\bin\smo\Microsoft.SqlServer.IntegrationServices.Server.dll

md5: 004223AB64B373DCB3586615E3B8E4D4 | sha1: 0C4A3810F9D2866A7CEE78E3EBB2DA479EB7BDCF | sha256: E529EB3FBEBC65703A43618955FA734E85F3958A51D1BC8318D4B1234DCBF0E4 | sha512: 54EA36C5BB412EE78D8166CB3E03F7D8A9ED6CDCD9EAA98BD485A6C483B2070BCB7BD245FAEECEF6FFAD6710BAFA628879F99B189A2A26678FDE623249938022

tools\dbatools\bin\smo\Microsoft.SqlServer.IntegrationServices.Server.IPC.dll

md5: 012D68C5517F8F9C46321CA413BDA0A0 | sha1: AB98536551FD7AC656578F3DB3C7B430EC243A18 | sha256: 7E1701159A34FD657CCD8E364F973E84371A5317C23AF70735D75444A90EDAF2 | sha512: 3EBA6417A475928862CABBB05B2B1B9D351F1C67A782D5622EA117307738F2B6A4B9446EA1E6843276361B0EFB2D9AF40E27841C373593E84B2B20B6ADB52190

tools\dbatools\bin\smo\Microsoft.SqlServer.IntegrationServices.server.shared.dll

md5: 669589A39FB92BE6C172E80715F16BDE | sha1: 41E15C23E95935B59A587D0BA0BDAA563552A6F8 | sha256: 1CE7C5069F50B6F1E17CC94BFB1AA1C22D6CD240E33FF345EE09AF5A25B20A3A | sha512: 388E368C3C92700EF5E206DFD6E25CFD26CF86A500012750ED6A55AEAAF41B2FD295606222B9CEF395DB9795B73A534BE57FB04DEEA9401450A91562B806F691

tools\dbatools\bin\smo\Microsoft.SqlServer.IntegrationServices.SqlTaskScheduler.dll

md5: 85A7BAEF7FD06730AF3F01E6F0DCC6E3 | sha1: CCDC593F8DF2934C997DDF3D4596471019DC4F15 | sha256: 05DD2559C6639410472D57B1FADEDBC9CCA6EE91330ADD457F51FE8096E03268 | sha512: 8FFAC5289FBC1B653377332A5B03F0262F3CD6E761B2C1E877596607E1632F612B1E5D01B37AE588D6EA9FACC779E6A0C6DCE91AB6DD64B8A3F80A8E369B4FDE

tools\dbatools\bin\smo\Microsoft.SqlServer.IntegrationServices.TaskScheduler.dll

md5: 95F3B078B083EE46A1CD09C761B38CC8 | sha1: 1325FB4CC11A1DFFA405B274B23D9A2F0D1186AF | sha256: 64437046B67B757374662264C4A69BB1AFFA2C9F48A3AC25729716EB226E3302 | sha512: 3977034D77F146160C76758CEF6B21C27657C397294003BA66430B1F77339751DB65003B529811BC4BE31FA95362BA3857E2916439486C24C8354144766CC8C8

tools\dbatools\bin\smo\Microsoft.SqlServer.IntegrationServices.WorkerAgent.dll

md5: DB1BE51BC57A920A1677578687D1BB9D | sha1: 10E39F4C2560653F70E7DE20235A1C3F87A247D0 | sha256: CC67D9D707D0182979387A2B4576034DD744A3156E595CBD5E5EFB246CF228A1 | sha512: 7BBBF7D8313BA92DC7FB92402C5D08BB881EB3F4DA82C1BE4881B86D00525F352461DC6B15B83FC301A1E645CA5BAF9274EB2C8389F58C7B956F2C6B2AEE339F

tools\dbatools\bin\smo\Microsoft.SqlServer.Management.AlwaysEncrypted.AzureKeyVaultProvider.dll

md5: E7603CA9A6D52FF1B94961FDBA21E907 | sha1: 93820B1A32F4339D7ACD231EC274B185555D8003 | sha256: 8354A28C3D206D09408391C2BC2F742313D7BA00CF819AB71F459C4CBA8EFAAF | sha512: 8796BC8EC8E0D19B2DC35B9DC580117C198A87EA238846F3DCB5D73A04530C71F98B43CDD4E8A811F0424C432EB50C8B9C39FF9E22425FBF3F41D5A2760AE58C

tools\dbatools\bin\smo\Microsoft.SqlServer.Management.AlwaysEncrypted.Management.dll

md5: 218909BEBF9C6680C8272B80E138C203 | sha1: 856EE0E4CCF174B67FE7CAA67F32AF5B3D42590B | sha256: CF1E5D65439DA659F2E75B6D90BB70B3F2C41C8662748198E9BC140F8D3C5999 | sha512: 584C442B7CEE75DE2B310E89E64388CEC3215E71CE9802AECD343DA9B05AAD7C0592B12BCCB57C2B8EE03792336FE17698033E262839EA0A18C1024F5E35900F

tools\dbatools\bin\diagnosticquery\SQLServerDiagnosticQueries_2012_201810.sql


-- SQL Server 2012 Diagnostic Information Queries
-- Glenn Berry 
-- Last Modified: November 11, 2018
-- https://www.sqlskills.com/blogs/glenn/
-- http://sqlserverperformance.wordpress.com/
-- Twitter: GlennAlanBerry

-- Please listen to my Pluralsight courses
-- https://www.pluralsight.com/author/glenn-berry

-- If you want to find all of our SQLskills SQL101 blog posts, check out https://www.sqlskills.com/help/sql101/


-- Please make sure you are using the correct version of these diagnostic queries for your version of SQL Server


-- If you like PowerShell, there is a very useful community solution for running these queries in an automated fashion
-- https://dbatools.io/

-- Invoke-DbaDiagnosticQuery
-- https://dbatools.io/functions/invoke-dbadiagnosticquery/


--******************************************************************************
--*   Copyright (C) 2018 Glenn Berry, SQLskills.com
--*   All rights reserved. 
--*
--*   For more scripts and sample code, check out 
--*      https://www.sqlskills.com/blogs/glenn
--*
--*   You may alter this code for your own *non-commercial* purposes. You may
--*   republish altered code as long as you include this copyright and give due credit. 
--*
--*
--*   THIS CODE AND INFORMATION ARE PROVIDED "AS IS" WITHOUT WARRANTY OF 
--*   ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED 
--*   TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A
--*   PARTICULAR PURPOSE. 
--*
--******************************************************************************

-- Check the major product version to see if it is SQL Server 2012
IF NOT EXISTS (SELECT * WHERE CONVERT(varchar(128), SERVERPROPERTY('ProductVersion')) LIKE '11%')
	BEGIN
		DECLARE @ProductVersion varchar(128) = CONVERT(varchar(128), SERVERPROPERTY('ProductVersion'));
		RAISERROR ('Script does not match the ProductVersion [%s] of this instance. Many of these queries may not work on this version.' , 18 , 16 , @ProductVersion);
	END
	ELSE
		PRINT N'You have the correct major version of SQL Server for this diagnostic information script';


-- Instance level queries *******************************

-- SQL and OS Version information for current instance  (Query 1) (Version Info)
SELECT @@SERVERNAME AS [Server Name], @@VERSION AS [SQL Server and OS Version Info];
------

-- SQL Server 2012 RTM Branch Builds						SQL Server 2012 SP1 Branch Builds					SQL Server 2012 SP2 Branch Builds						SQL Server 2012 SP3 Branch Builds					SQL Server 2012 SP4 Branch Builds
-- Build			Description			Release Date		Build			Description		Release Date		Build			Description		    Release Date        Build			Description		    Release Date	Build			Description		    Release Date
-- 11.0.2100		RTM					  3/6/2012  
-- 11.0.2316		RTM CU1				 4/12/2012
-- 11.0.2325        RTM CU2				 6/18/2012 -->		11.0.3000		SP1 RTM			11/7/2012
-- 11.0.2332		RTM CU3				 8/31/2012
-- 11.0.2376	    RTM CU3 + QFE	     10/9/2012
-- 11.0.2383	    RTM CU4			    10/15/2012 -->		11.0.3321		SP1 CU1			11/20/2012
-- 11.0.2395		RTM CU5				12/17/2012 -->      11.0.3339		SP1 CU2			1/21/2013
-- 11.0.2401        RTM CU6              2/18/2013 -->      11.0.3349       SP1 CU3			3/18/2013
-- 11.0.2405        RTM CU7              4/15/2013 -->      11.0 3368       SP1 CU4         5/30/2013
-- 11.0.2410        RTM CU8              6/17/2013 -->      11.0.3373       SP1 CU5         7/15/2013
-- 11.0.2419        RTM CU9              8/20/2013 -->      11.0.3381		SP1 CU6			9/16/2013
-- 11.0.2420        RTM CU10            10/21/2013 -->		11.0.3393       SP1 CU7         11/18/2013
-- 11.0.2424        RTM CU11            12/16/2003 -->      11.0.3401       SP1 CU8         1/20/2014
--                                                          11.0.3412       SP1 CU9         3/17/2014 -->		11.0.5058		SP2 RTM			    6/10/2014
--                                                          11.0.3431       SP1 CU10        5/19/2014
--                                                          11.0.3449       SP1 CU11        7/21/2014 -->		11.0.5532		SP2 CU1			    7/23/2014
--                                                          11.0.3470       SP1 CU12        9/15/2014 -->       11.0.5548       SP2 CU2             9/15/2014
--                                                          11.0.3482		SP1 CU13        11/17/2014-->       11.0.5556		SP2 CU3            11/17/2014
--                                                          11.0.3486       SP1 CU14        1/19/2015 -->       11.0.5569       SP2 CU4             1/19/2015
--                                                                                                              11.0.5571       SP2 CU4 + COD HF     2/4/2015  
--                                                          11.0.3487		SP1 CU15		3/16/2015 -->       11.0.5582       SP2 CU5             3/16/2015
--															11.0.3492       SP1 CU16        5/18/2015 -->       11.0.5592		SP2 CU6				5/18/2015
--                                                                                                              11.0.5623       SP2 CU7				7/20/2015
--                                                                                                              11.0.5634		SP2 CU8				9/21/2015
--																												11.0.5641		SP2 CU9			   11/16/2015   ---->  11.0.6020		SP3 RTM			11/21/2015
--																												11.0.5644		SP2 CU10			1/18/2016   ---->  11.0.6518		SP3 CU1			 1/18/2016
--																												11.0.5646		SP2 CU11			3/21/2016	---->  11.0.6523		SP3 CU2			 3/21/2016
--																												11.0.5649		SP2 CU12			5/16/2016	---->  11.0.6537		SP3 CU3			 5/16/2016
--																												11.0.5655		SP2 CU13			7/18/2016	---->  11.0.6540		SP3 CU4			 7/18/2016	
--																												11.0.5657		SP2 CU14		    9/19/2016   ---->  11.0.6544		SP3 CU5			 9/20/2016
--																												11.0.5676		SP2 CU15 		   11/16/2016   ---->  11.0.6567		SP3 CU6 		11/16/2016
--																												11.0.5678		SP2 CU16			1/17/2017   ---->  11.0.6579		SP3 CU7			 1/17/2017
--																																									   11.0.6594		SP3 CU8			 3/20/2017
--																																									   11.0.6598		SP3 CU9			 5/15/2017																											                                                            				
--																																									   11.0.6607		SP3 CU10		  8/8/2017																											
--																																																							11.0.7001		SP4 RTM				10/3/2017	
-- 
-- Security Update for SQL Server 2012 SP4 (KB4057116) 
-- https://bit.ly/2F33Sc4
--                                                                                                                                                                                                                          11.0.7462	    Security Update		1/12/2018  (Security Update for SQL Server 2012 SP4 (KB4057116))
-- SQL Server 2012 Service Pack 4 (SP4) Released!
-- https://bit.ly/2qN8kr3

-- How to determine the version, edition and update level of SQL Server and its components 
-- https://bit.ly/2oAjKgW	

-- SQL Server 2012 SP3 build versions
-- https://bit.ly/2HFjAzA 

-- SQL Server 2012 SP2 build versions 
-- https://bit.ly/2qLqqcS

-- The SQL Server 2012 builds that were released after SQL Server 2012 Service Pack 1 was released
-- https://bit.ly/2HG21za

-- The SQL Server 2012 builds that were released after SQL Server 2012 was released
-- https://bit.ly/2K1xZnX

-- Where to find information about the latest SQL Server builds
-- https://bit.ly/2IGHbfY

-- Recommended updates and configuration options for SQL Server 2012 and SQL Server 2014 used with high-performance workloads
-- https://bit.ly/2Hy3zIZ

-- Performance and Stability Related Fixes in Post-SQL Server 2012 SP3 Builds
-- https://bit.ly/2woDJ4Z

-- Performance and Stability Related Fixes in Post-SQL Server 2012 SP2 Builds
-- https://bit.ly/2vuKZzp

-- Performance and Stability Related Fixes in Post-SQL Server 2012 SP1 Builds
-- https://bit.ly/2vBt1LC

-- Performance Related Fixes in Post-SQL Server 2012 RTM Builds
-- https://bit.ly/2vuIQn4

-- Announcing updates to the SQL Server Incremental Servicing Model (ISM)
-- https://bit.ly/1RzYITz

-- Update Center for Microsoft SQL Server
-- https://bit.ly/2pZptuQ

-- Download SQL Server Management Studio (SSMS)
-- https://bit.ly/1OcupT9

-- Download and install Azure Data Studio 
-- https://bit.ly/2vgke1A


-- Get socket, physical core and logical core count from the SQL Server Error log. (Query 2) (Core Counts)
-- This query might take a few seconds depending on the size of your error log 
EXEC sys.xp_readerrorlog 0, 1, N'detected', N'socket';
------

-- This can help you determine the exact core counts used by SQL Server and whether HT is enabled or not
-- It can also help you confirm your SQL Server licensing model
-- Be on the lookout for this message "using 40 logical processors based on SQL Server licensing" 
-- (when you have more than 40 logical cores) which means grandfathered Server/CAL licensing
-- This query will return no results if your error log has been recycled since the instance was last started
-- New in SQL Server 2012 SP4



-- Get selected server properties (Query 3) (Server Properties)
SELECT SERVERPROPERTY('MachineName') AS [MachineName], 
SERVERPROPERTY('ServerName') AS [ServerName],  
SERVERPROPERTY('InstanceName') AS [Instance], 
SERVERPROPERTY('IsClustered') AS [IsClustered], 
SERVERPROPERTY('ComputerNamePhysicalNetBIOS') AS [ComputerNamePhysicalNetBIOS], 
SERVERPROPERTY('Edition') AS [Edition], 
SERVERPROPERTY('ProductLevel') AS [ProductLevel],				-- What servicing branch (RTM/SP/CU)
SERVERPROPERTY('ProductUpdateLevel') AS [ProductUpdateLevel],	-- Within a servicing branch, what CU# is applied
SERVERPROPERTY('ProductVersion') AS [ProductVersion],
SERVERPROPERTY('ProductMajorVersion') AS [ProductMajorVersion], 
SERVERPROPERTY('ProductMinorVersion') AS [ProductMinorVersion], 
SERVERPROPERTY('ProductBuild') AS [ProductBuild], 
SERVERPROPERTY('ProductBuildType') AS [ProductBuildType],		      -- Is this a GDR or OD hotfix (NULL if on a CU build)
SERVERPROPERTY('ProductUpdateReference') AS [ProductUpdateReference], -- KB article number that is applicable for this build
SERVERPROPERTY('ProcessID') AS [ProcessID],
SERVERPROPERTY('Collation') AS [Collation], 
SERVERPROPERTY('IsFullTextInstalled') AS [IsFullTextInstalled], 
SERVERPROPERTY('IsIntegratedSecurityOnly') AS [IsIntegratedSecurityOnly],
SERVERPROPERTY('FilestreamConfiguredLevel') AS [FilestreamConfiguredLevel],
SERVERPROPERTY('IsHadrEnabled') AS [IsHadrEnabled], 
SERVERPROPERTY('HadrManagerStatus') AS [HadrManagerStatus],
SERVERPROPERTY('InstanceDefaultDataPath') AS [InstanceDefaultDataPath],
SERVERPROPERTY('InstanceDefaultLogPath') AS [InstanceDefaultLogPath],
SERVERPROPERTY('BuildClrVersion') AS [Build CLR Version];
------

-- This gives you a lot of useful information about your instance of SQL Server,
-- such as the ProcessID for SQL Server and your collation
-- Note: Some columns will be NULL on older SQL Server builds

-- SERVERPROPERTY (Transact-SQL)
-- https://bit.ly/2eeaXeI


-- Get instance-level configuration values for instance  (Query 4) (Configuration Values)
SELECT name, value, value_in_use, minimum, maximum, [description], is_dynamic, is_advanced
FROM sys.configurations WITH (NOLOCK)
ORDER BY name OPTION (RECOMPILE);
------

-- Focus on these settings:
-- backup compression default (should be 1 in most cases)
-- clr enabled (only enable if it is needed)
-- cost threshold for parallelism (depends on your workload)
-- lightweight pooling (should be zero)
-- max degree of parallelism (depends on your workload and hardware)
-- max server memory (MB) (set to an appropriate value, not the default)
-- optimize for ad hoc workloads (should be 1)
-- priority boost (should be zero)
-- remote admin connections (should be 1)


-- Returns a list of all global trace flags that are enabled (Query 5) (Global Trace Flags)
DBCC TRACESTATUS (-1);
------

-- If no global trace flags are enabled, no results will be returned.
-- It is very useful to know what global trace flags are currently enabled as part of the diagnostic process.

-- Common trace flags that should be enabled in most cases
-- TF 1117 - When growing a data file, grow all files at the same time so they remain the same size, reducing allocation contention points
--           https://bit.ly/2GY1kOl
-- 
-- TF 1118 - Helps alleviate allocation contention in tempdb, SQL Server allocates full extents to each database object, 
--           thereby eliminating the contention on SGAM pages (more important with older versions of SQL Server)
--           Recommendations to reduce allocation contention in SQL Server tempdb database
--           https://bit.ly/2GY1kOl

-- TF 2371 - Lowers auto update statistics threshold for large tables (on tables with more than 25,000 rows)
--           https://bit.ly/2HySkAg

-- TF 3023 - Enables backup checksum default
--           https://bit.ly/2vtjqqc

-- TF 3226 - Supresses logging of successful database backup messages to the SQL Server Error Log
--           https://bit.ly/2p6MTjS

-- TF 3449 - Enables use of dirty page manager (SQL Server 2012 SP3 CU3 and later)
--			 https://bit.ly/2uj0h5M

-- TF 6533 - Spatial performance improvements in SQL Server 2012 and 2014
--           https://bit.ly/2v7C7ze

-- TF 6534 - Enables use of native code to improve performance with spatial data
--           https://bit.ly/2HrQUpU

-- TF 8079 - Enables automatic soft-NUMA on systems with eight or more physical cores per NUMA node (with SQL Server 2012 SP4)
--           https://bit.ly/2qN8kr3

-- DBCC TRACEON - Trace Flags (Transact-SQL)
-- https://bit.ly/2FuSvPg


-- Returns status of instant file initialization (Query 6) (IFI Status)
EXEC sys.xp_readerrorlog 0, 1, N'Database Instant File Initialization';
------

-- Lets you determine whether Instant File Initialization (IFI) is enabled for the instance
-- This should be enabled in the vast majority of cases
-- (Added in SQL Server 2012 SP4)

-- Database Instant File Initialization
-- https://bit.ly/2nTX74y

-- Misconceptions around instant file initialization
-- https://bit.ly/2oBSKgZ



-- SQL Server Process Address space info  (Query 7) (Process Memory)
-- (shows whether locked pages is enabled, among other things)
SELECT physical_memory_in_use_kb/1024 AS [SQL Server Memory Usage (MB)],
	   locked_page_allocations_kb/1024 AS [SQL Server Locked Pages Allocation (MB)],
       large_page_allocations_kb/1024 AS [SQL Server Large Pages Allocation (MB)], 
	   page_fault_count, memory_utilization_percentage, available_commit_limit_kb, 
	   process_physical_memory_low, process_virtual_memory_low
FROM sys.dm_os_process_memory WITH (NOLOCK) OPTION (RECOMPILE);
------

-- You want to see 0 for process_physical_memory_low
-- You want to see 0 for process_virtual_memory_low
-- This indicates that you are not under internal memory pressure
-- If locked_page_allocations_kb > 0, then LPIM is enabled

-- How to enable the "locked pages" feature in SQL Server 2012
-- https://bit.ly/2F5UjOA

-- Memory Management Architecture Guide
-- https://bit.ly/2JKkadC 



-- SQL Server Services information (Query 8) (SQL Server Services Info)
SELECT servicename, process_id, startup_type_desc, status_desc, 
last_startup_time, service_account, is_clustered, cluster_nodename, [filename]
FROM sys.dm_server_services WITH (NOLOCK) OPTION (RECOMPILE);
------

-- Tells you the account being used for the SQL Server Service and the SQL Agent Service
-- Shows the process_id, when they were last started, and their current status
-- Also shows whether you are running on a failover cluster instance, and what node you are running on

-- sys.dm_server_services (Transact-SQL)
-- https://bit.ly/2oKa1Un


-- Last backup information by database  (Query 9) (Last Backup By Database)
SELECT ISNULL(d.[name], bs.[database_name]) AS [Database], d.recovery_model_desc AS [Recovery Model], 
       d.log_reuse_wait_desc AS [Log Reuse Wait Desc],
    MAX(CASE WHEN [type] = 'D' THEN bs.backup_finish_date ELSE NULL END) AS [Last Full Backup],
    MAX(CASE WHEN [type] = 'I' THEN bs.backup_finish_date ELSE NULL END) AS [Last Differential Backup],
    MAX(CASE WHEN [type] = 'L' THEN bs.backup_finish_date ELSE NULL END) AS [Last Log Backup]
FROM sys.databases AS d WITH (NOLOCK)
LEFT OUTER JOIN msdb.dbo.backupset AS bs WITH (NOLOCK)
ON bs.[database_name] = d.[name] 
AND bs.backup_finish_date > GETDATE()- 30
WHERE d.name <> N'tempdb'
GROUP BY ISNULL(d.[name], bs.[database_name]), d.recovery_model_desc, d.log_reuse_wait_desc, d.[name] 
ORDER BY d.recovery_model_desc, d.[name] OPTION (RECOMPILE);
------

-- This helps you spot runaway transaction logs and other issues with your backup schedule


-- Get SQL Server Agent jobs and Category information (Query 10) (SQL Server Agent Jobs)
SELECT sj.name AS [Job Name], sj.[description] AS [Job Description], SUSER_SNAME(sj.owner_sid) AS [Job Owner],
sj.date_created AS [Date Created], sj.[enabled] AS [Job Enabled], 
sj.notify_email_operator_id, sj.notify_level_email, sc.name AS [CategoryName],
s.[enabled] AS [Sched Enabled], js.next_run_date, js.next_run_time
FROM msdb.dbo.sysjobs AS sj WITH (NOLOCK)
INNER JOIN msdb.dbo.syscategories AS sc WITH (NOLOCK)
ON sj.category_id = sc.category_id
LEFT OUTER JOIN msdb.dbo.sysjobschedules AS js WITH (NOLOCK)
ON sj.job_id = js.job_id
LEFT OUTER JOIN msdb.dbo.sysschedules AS s WITH (NOLOCK)
ON js.schedule_id = s.schedule_id
ORDER BY sj.name OPTION (RECOMPILE);
------

-- Gives you some basic information about your SQL Server Agent jobs, who owns them and how they are configured
-- Look for Agent jobs that are not owned by sa
-- Look for jobs that have a notify_email_operator_id set to 0 (meaning no operator)
-- Look for jobs that have a notify_level_email set to 0 (meaning no e-mail is ever sent)
--
-- MSDN sysjobs documentation
-- https://bit.ly/2paDEOP

-- SQL Server Maintenance Solution
-- https://bit.ly/1pgchQu


-- Get SQL Server Agent Alert Information (Query 11) (SQL Server Agent Alerts)
SELECT name, event_source, message_id, severity, [enabled], has_notification, 
       delay_between_responses, occurrence_count, last_occurrence_date, last_occurrence_time
FROM msdb.dbo.sysalerts WITH (NOLOCK)
ORDER BY name OPTION (RECOMPILE);
------

-- Gives you some basic information about your SQL Server Agent Alerts (which are different from SQL Server Agent jobs)
-- Read more about Agent Alerts here: https://bit.ly/2Giz0Xf



-- Windows information (Query 12) (Windows Info)
SELECT windows_release, windows_service_pack_level, 
       windows_sku, os_language_version
FROM sys.dm_os_windows_info WITH (NOLOCK) OPTION (RECOMPILE);
------

-- Gives you major OS version, Service Pack, Edition, and language info for the operating system
-- 10.0 is either Windows 10 or Windows Server 2016
-- 6.3 is either Windows 8.1, or Windows Server 2012 R2  
-- 6.2 is either Windows 8 or Windows Server 2012
-- 6.1 is either Windows 7 or Windows Server 2008 R2
-- 6.0 is either Windows Vista or Windows Server 2008

-- Windows SKU codes
-- 4 is Enterprise Edition
-- 7 is Standard Server Edition
-- 8 is Datacenter Server Edition
-- 10 is Enterprise Server Edition
-- 48 is Professional Edition
-- 161 is Pro for Workstations

-- 1033 for os_language_version is US-English

-- SQL Server 2012 requires Windows Server 2008 SP2 or newer

-- Hardware and Software Requirements for Installing SQL Server 2012
-- https://bit.ly/1yRYXkQ

-- Using SQL Server in Windows 8 and later versions of Windows operating system 
-- https://bit.ly/2F7Ax0P



-- SQL Server NUMA Node information  (Query 13) (SQL Server NUMA Info)
SELECT node_id, node_state_desc, memory_node_id, processor_group, online_scheduler_count, 
       idle_scheduler_count, active_worker_count, avg_load_balance, resource_monitor_state
FROM sys.dm_os_nodes WITH (NOLOCK) 
WHERE node_state_desc <> N'ONLINE DAC' OPTION (RECOMPILE);
------

-- Gives you some useful information about the composition and relative load on your NUMA nodes
-- You want to see an equal number of schedulers on each NUMA node
-- Watch out if SQL Server 2012 Standard Edition has been installed 
-- on a physical or virtual machine with more than four sockets or more than 16 physical cores

-- sys.dm_os_nodes (Transact-SQL)
-- https://bit.ly/2pn5Mw8

-- Balancing Your Available SQL Server Core Licenses Evenly Across NUMA Nodes
-- https://bit.ly/2vfC4Rq



-- Good basic information about OS memory amounts and state  (Query 14) (System Memory)
SELECT total_physical_memory_kb/1024 AS [Physical Memory (MB)], 
       available_physical_memory_kb/1024 AS [Available Memory (MB)], 
       total_page_file_kb/1024 AS [Total Page File (MB)], 
	   available_page_file_kb/1024 AS [Available Page File (MB)], 
	   system_cache_kb/1024 AS [System Cache (MB)],
       system_memory_state_desc AS [System Memory State]
FROM sys.dm_os_sys_memory WITH (NOLOCK) OPTION (RECOMPILE);
------

-- You want to see "Available physical memory is high" for System Memory State
-- This indicates that you are not under external memory pressure

-- Possible System Memory State values:
-- Available physical memory is high
-- Physical memory usage is steady
-- Available physical memory is low
-- Available physical memory is running low
-- Physical memory state is transitioning

-- sys.dm_os_sys_memory (Transact-SQL)
-- https://bit.ly/2pcV0xq



-- You can skip the next two queries if you know you don't have a clustered instance


-- Get information about your cluster nodes and their status  (Query 15) (Cluster Node Properties)
-- (if your database server is in a failover cluster)
SELECT NodeName, status_description, is_current_owner
FROM sys.dm_os_cluster_nodes WITH (NOLOCK) OPTION (RECOMPILE);
------

-- Knowing which node owns the cluster resources is critical
-- Especially when you are installing Windows or SQL Server updates
-- You will see no results if your instance is not clustered

-- Recommended hotfixes and updates for Windows Server 2012 R2-based failover clusters
-- https://bit.ly/1z5BfCw


-- Get information about any AlwaysOn AG cluster this instance is a part of (Query 16) (AlwaysOn AG Cluster)
SELECT cluster_name, quorum_type_desc, quorum_state_desc
FROM sys.dm_hadr_cluster WITH (NOLOCK) OPTION (RECOMPILE);
------

-- You will see no results if your instance is not using AlwaysOn AGs



-- Hardware information from SQL Server 2012  (Query 17) (Hardware Info)
SELECT cpu_count AS [Logical CPU Count], scheduler_count, 
       hyperthread_ratio AS [Hyperthread Ratio],
       cpu_count/hyperthread_ratio AS [Physical CPU Count], 
       physical_memory_kb/1024 AS [Physical Memory (MB)], 
	   committed_kb/1024 AS [Committed Memory (MB)],
       committed_target_kb/1024 AS [Committed Target Memory (MB)],
       max_workers_count AS [Max Workers Count], 
	   affinity_type_desc AS [Affinity Type], 
       sqlserver_start_time AS [SQL Server Start Time],
	   DATEDIFF(hour, sqlserver_start_time, GETDATE()) AS [SQL Server Up Time (hrs)],
	   virtual_machine_type_desc AS [Virtual Machine Type]
FROM sys.dm_os_sys_info WITH (NOLOCK) OPTION (RECOMPILE);
------

-- Gives you some good basic hardware information about your database server
-- Cannot distinguish between HT and multi-core
-- Note: virtual_machine_type_desc of HYPERVISOR does not automatically mean you are running SQL Server inside of a VM
-- It merely indicates that you have a hypervisor running on your host

-- sys.dm_os_sys_info (Transact-SQL)
-- https://bit.ly/2pczOYs


-- Get System Manufacturer and model number from SQL Server Error log (Query 18) (System Manufacturer)
EXEC sys.xp_readerrorlog 0, 1, N'Manufacturer';
------ 

-- This can help you determine the capabilities and capacities of your database server
-- Can also be used to confirm if you are running in a VM
-- This query might take a few seconds if you have not recycled your error log recently
-- This query will return no results if your error log has been recycled since the instance was started


-- Get pvscsi info from Windows Registry  (Query 19) (PVSCSI Driver Parameters)
EXEC sys.xp_instance_regread N'HKEY_LOCAL_MACHINE', N'SYSTEM\CurrentControlSet\services\pvscsi\Parameters\Device', N'DriverParameter';
------

-- This is valid for VMware VMs
-- Recommended value for intensive I/O patterns from VMware is: RequestRingPages=32,MaxQueueDepth=254
-- https://kb.vmware.com/s/article/2053145



-- Get BIOS date from Windows Registry (Query 20) (BIOS Date)
EXEC sys.xp_instance_regread N'HKEY_LOCAL_MACHINE', N'HARDWARE\DESCRIPTION\System\BIOS', N'BiosReleaseDate';
------

-- Helps you understand whether the main system BIOS is up to date, and the possible age of the hardware
-- Not as useful for virtualization


-- Get processor description from Windows Registry  (Query 21) (Processor Description)
EXEC sys.xp_instance_regread N'HKEY_LOCAL_MACHINE', N'HARDWARE\DESCRIPTION\System\CentralProcessor\0', N'ProcessorNameString';
------

-- Gives you the model number and rated clock speed of your processor(s)
-- Your processors may be running at less than the rated clock speed due
-- to the Windows Power Plan or hardware power management

-- You can use CPU-Z to get your actual CPU core speed and a lot of other useful information
-- https://bit.ly/QhR6xF

-- You can learn more about processor selection for SQL Server by following this link
-- https://bit.ly/2F3aVlP



-- Get information on location, time and size of any memory dumps from SQL Server  (Query 22) (Memory Dump Info)
SELECT [filename], creation_time, size_in_bytes/1048576.0 AS [Size (MB)]
FROM sys.dm_server_memory_dumps WITH (NOLOCK) 
ORDER BY creation_time DESC OPTION (RECOMPILE);
------

-- This will not return any rows if you have 
-- not had any memory dumps (which is a good thing)

-- sys.dm_server_memory_dumps (Transact-SQL)
-- https://bit.ly/2elwWll



-- Look at Suspect Pages table (Query 23) (Suspect Pages)
SELECT DB_NAME(database_id) AS [Database Name], [file_id], page_id, 
       event_type, error_count, last_update_date 
FROM msdb.dbo.suspect_pages WITH (NOLOCK)
ORDER BY database_id OPTION (RECOMPILE);
------

-- event_type value descriptions
-- 1 = 823 error caused by an operating system CRC error
--     or 824 error other than a bad checksum or a torn page (for example, a bad page ID)
-- 2 = Bad checksum
-- 3 = Torn page
-- 4 = Restored (The page was restored after it was marked bad)
-- 5 = Repaired (DBCC repaired the page)
-- 7 = Deallocated by DBCC

-- Ideally, this query returns no results. The table is limited to 1000 rows.
-- If you do get results here, you should do further investigation to determine the root cause

-- Manage the suspect_pages Table
-- https://bit.ly/2Fvr1c9


-- Get number of data files in tempdb database (Query 24) (Tempdb Data Files)
EXEC sys.xp_readerrorlog 0, 1, N'The tempdb database has';
------

-- Get the number of data files in the tempdb database
-- 4-8 data files that are all the same size is a good starting point
-- This query will return no results if your error log has been recycled since the instance was last started
-- This will be blank unless you have Service Pack 4 or later


-- File names and paths for all user and system databases on instance  (Query 25) (Database Filenames and Paths)
SELECT DB_NAME([database_id]) AS [Database Name], 
       [file_id], [name], physical_name, [type_desc], state_desc,
	   is_percent_growth, growth,
	   CONVERT(bigint, growth/128.0) AS [Growth in MB], 
       CONVERT(bigint, size/128.0) AS [Total Size in MB]
FROM sys.master_files WITH (NOLOCK)
ORDER BY DB_NAME([database_id]), [file_id] OPTION (RECOMPILE);
------

-- Things to look at:
-- Are data files and log files on different drives?
-- Is everything on the C: drive?
-- Is tempdb on dedicated drives?
-- Is there only one tempdb data file?
-- Are all of the tempdb data files the same size?
-- Are there multiple data files for user databases?
-- Is percent growth enabled for any files (which is bad)?


-- Volume info for all LUNS that have database files on the current instance (Query 26) (Volume Info)
SELECT DISTINCT vs.volume_mount_point, vs.file_system_type, vs.logical_volume_name, 
CONVERT(DECIMAL(18,2), vs.total_bytes/1073741824.0) AS [Total Size (GB)],
CONVERT(DECIMAL(18,2), vs.available_bytes/1073741824.0) AS [Available Size (GB)],  
CONVERT(DECIMAL(18,2), vs.available_bytes * 1. / vs.total_bytes * 100.) AS [Space Free %],
vs.supports_compression, vs.is_compressed, 
vs.supports_sparse_files, vs.supports_alternate_streams
FROM sys.master_files AS f WITH (NOLOCK)
CROSS APPLY sys.dm_os_volume_stats(f.database_id, f.[file_id]) AS vs 
ORDER BY vs.volume_mount_point OPTION (RECOMPILE);
------

-- Shows you the total and free space on the LUNs where you have database files
-- Being low on free space can negatively affect performance

-- sys.dm_os_volume_stats (Transact-SQL)
-- https://bit.ly/2oBPNNr



-- Drive level latency information (Query 27) (Drive Level Latency)
-- Based on code from Jimmy May
SELECT tab.[Drive], tab.volume_mount_point AS [Volume Mount Point], 
	CASE 
		WHEN num_of_reads = 0 THEN 0 
		ELSE (io_stall_read_ms/num_of_reads) 
	END AS [Read Latency],
	CASE 
		WHEN num_of_writes = 0 THEN 0 
		ELSE (io_stall_write_ms/num_of_writes) 
	END AS [Write Latency],
	CASE 
		WHEN (num_of_reads = 0 AND num_of_writes = 0) THEN 0 
		ELSE (io_stall/(num_of_reads + num_of_writes)) 
	END AS [Overall Latency],
	CASE 
		WHEN num_of_reads = 0 THEN 0 
		ELSE (num_of_bytes_read/num_of_reads) 
	END AS [Avg Bytes/Read],
	CASE 
		WHEN num_of_writes = 0 THEN 0 
		ELSE (num_of_bytes_written/num_of_writes) 
	END AS [Avg Bytes/Write],
	CASE 
		WHEN (num_of_reads = 0 AND num_of_writes = 0) THEN 0 
		ELSE ((num_of_bytes_read + num_of_bytes_written)/(num_of_reads + num_of_writes)) 
	END AS [Avg Bytes/Transfer]
FROM (SELECT LEFT(UPPER(mf.physical_name), 2) AS Drive, SUM(num_of_reads) AS num_of_reads,
	         SUM(io_stall_read_ms) AS io_stall_read_ms, SUM(num_of_writes) AS num_of_writes,
	         SUM(io_stall_write_ms) AS io_stall_write_ms, SUM(num_of_bytes_read) AS num_of_bytes_read,
	         SUM(num_of_bytes_written) AS num_of_bytes_written, SUM(io_stall) AS io_stall, vs.volume_mount_point 
      FROM sys.dm_io_virtual_file_stats(NULL, NULL) AS vfs
      INNER JOIN sys.master_files AS mf WITH (NOLOCK)
      ON vfs.database_id = mf.database_id AND vfs.file_id = mf.file_id
	  CROSS APPLY sys.dm_os_volume_stats(mf.database_id, mf.[file_id]) AS vs 
      GROUP BY LEFT(UPPER(mf.physical_name), 2), vs.volume_mount_point) AS tab
ORDER BY [Overall Latency] OPTION (RECOMPILE);
------

-- Shows you the drive-level latency for reads and writes, in milliseconds
-- Latency above 30-40ms is usually a problem
-- These latency numbers include all file activity against all SQL Server 
-- database files on each drive since SQL Server was last started


-- Calculates average stalls per read, per write, and per total input/output for each database file  (Query 28) (IO Latency by File)
SELECT DB_NAME(fs.database_id) AS [Database Name], CAST(fs.io_stall_read_ms/(1.0 + fs.num_of_reads) AS NUMERIC(10,1)) AS [avg_read_latency_ms],
CAST(fs.io_stall_write_ms/(1.0 + fs.num_of_writes) AS NUMERIC(10,1)) AS [avg_write_latency_ms],
CAST((fs.io_stall_read_ms + fs.io_stall_write_ms)/(1.0 + fs.num_of_reads + fs.num_of_writes) AS NUMERIC(10,1)) AS [avg_io_latency_ms],
CONVERT(DECIMAL(18,2), mf.size/128.0) AS [File Size (MB)], mf.physical_name, mf.type_desc, fs.io_stall_read_ms, fs.num_of_reads, 
fs.io_stall_write_ms, fs.num_of_writes, fs.io_stall_read_ms + fs.io_stall_write_ms AS [io_stalls], fs.num_of_reads + fs.num_of_writes AS [total_io]
FROM sys.dm_io_virtual_file_stats(null,null) AS fs
INNER JOIN sys.master_files AS mf WITH (NOLOCK)
ON fs.database_id = mf.database_id
AND fs.[file_id] = mf.[file_id]
ORDER BY avg_io_latency_ms DESC OPTION (RECOMPILE);
------

-- Helps determine which database files on the entire instance have the most I/O bottlenecks
-- This can help you decide whether certain LUNs are overloaded and whether you might
-- want to move some files to a different location or perhaps improve your I/O performance
-- These latency numbers include all file activity against each SQL Server 
-- database file since SQL Server was last started


-- Look for I/O requests taking longer than 15 seconds in the six most recent SQL Server Error Logs (Query 29) (IO Warnings)
CREATE TABLE #IOWarningResults(LogDate datetime, ProcessInfo sysname, LogText nvarchar(1000));

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 0, 1, N'taking longer than 15 seconds';

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 1, 1, N'taking longer than 15 seconds';

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 2, 1, N'taking longer than 15 seconds';

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 3, 1, N'taking longer than 15 seconds';

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 4, 1, N'taking longer than 15 seconds';

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 5, 1, N'taking longer than 15 seconds';

SELECT LogDate, ProcessInfo, LogText
FROM #IOWarningResults
ORDER BY LogDate DESC;

DROP TABLE #IOWarningResults;
------  

-- Finding 15 second I/O warnings in the SQL Server Error Log is useful evidence of
-- poor I/O performance (which might have many different causes)
-- Look to see if you see any patterns in the results (same files, same drives, same time of day, etc.)

-- Diagnostics in SQL Server help detect stalled and stuck I/O operations
-- https://bit.ly/2qtaw73


-- Resource Governor Resource Pool information (Query 30) (RG Resource Pools)
SELECT pool_id, [Name], statistics_start_time,
       min_memory_percent, max_memory_percent,  
       max_memory_kb/1024 AS [max_memory_mb],  
       used_memory_kb/1024 AS [used_memory_mb],   
       target_memory_kb/1024 AS [target_memory_mb]
FROM sys.dm_resource_governor_resource_pools WITH (NOLOCK)
OPTION (RECOMPILE);
------

-- sys.dm_resource_governor_resource_pools (Transact-SQL)
-- https://bit.ly/2MVU0Vy



-- Recovery model, log reuse wait description, log file size, log usage size  (Query 31) (Database Properties)
-- and compatibility level for all databases on instance
SELECT db.[name] AS [Database Name], SUSER_SNAME(db.owner_sid) AS [Database Owner], db.recovery_model_desc AS [Recovery Model], 
db.state_desc, db.containment_desc, db.log_reuse_wait_desc AS [Log Reuse Wait Description], 
CONVERT(DECIMAL(18,2), ls.cntr_value/1024.0) AS [Log Size (MB)], CONVERT(DECIMAL(18,2), lu.cntr_value/1024.0) AS [Log Used (MB)],
CAST(CAST(lu.cntr_value AS FLOAT) / CAST(ls.cntr_value AS FLOAT)AS DECIMAL(18,2)) * 100 AS [Log Used %], 
db.[compatibility_level] AS [DB Compatibility Level], db.page_verify_option_desc AS [Page Verify Option], 
db.is_auto_create_stats_on, db.is_auto_update_stats_on, db.is_auto_update_stats_async_on, db.is_parameterization_forced, 
db.snapshot_isolation_state_desc, db.is_read_committed_snapshot_on, db.is_auto_close_on, db.is_auto_shrink_on, 
db.target_recovery_time_in_seconds, db.is_cdc_enabled, db.is_published, db.group_database_id, db.replica_id,
db.is_encrypted, de.encryption_state, de.percent_complete, de.key_algorithm, de.key_length
FROM sys.databases AS db WITH (NOLOCK)
INNER JOIN sys.dm_os_performance_counters AS lu WITH (NOLOCK)
ON db.name = lu.instance_name
INNER JOIN sys.dm_os_performance_counters AS ls WITH (NOLOCK)
ON db.name = ls.instance_name
LEFT OUTER JOIN sys.dm_database_encryption_keys AS de WITH (NOLOCK)
ON db.database_id = de.database_id
WHERE lu.counter_name LIKE N'Log File(s) Used Size (KB)%' 
AND ls.counter_name LIKE N'Log File(s) Size (KB)%'
AND ls.cntr_value > 0 
ORDER BY db.[name] OPTION (RECOMPILE);
------

-- Things to look at:
-- How many databases are on the instance?
-- What recovery models are they using?
-- What is the log reuse wait description?
-- How full are the transaction logs?
-- What compatibility level are the databases on? 
-- What is the Page Verify Option? (should be CHECKSUM)
-- Is Auto Update Statistics Asynchronously enabled?
-- Make sure auto_shrink and auto_close are not enabled!



-- Missing Indexes for all databases by Index Advantage  (Query 32) (Missing Indexes All Databases)
SELECT CONVERT(decimal(18,2), user_seeks * avg_total_user_cost * (avg_user_impact * 0.01)) AS [index_advantage],
FORMAT(migs.last_user_seek, 'yyyy-MM-dd HH:mm:ss') AS [last_user_seek], 
mid.[statement] AS [Database.Schema.Table],
COUNT(1) OVER(PARTITION BY mid.[statement]) AS [missing_indexes_for_table],
COUNT(1) OVER(PARTITION BY mid.[statement], equality_columns) AS [similar_missing_indexes_for_table],
mid.equality_columns, mid.inequality_columns, mid.included_columns,
migs.unique_compiles, migs.user_seeks, 
CONVERT(decimal(18,2), migs.avg_total_user_cost) AS [avg_total_user_cost], migs.avg_user_impact 
FROM sys.dm_db_missing_index_group_stats AS migs WITH (NOLOCK)
INNER JOIN sys.dm_db_missing_index_groups AS mig WITH (NOLOCK)
ON migs.group_handle = mig.index_group_handle
INNER JOIN sys.dm_db_missing_index_details AS mid WITH (NOLOCK)
ON mig.index_handle = mid.index_handle
ORDER BY index_advantage DESC OPTION (RECOMPILE);
------

-- Getting missing index information for all of the databases on the instance is very useful
-- Look at last user seek time, number of user seeks to help determine source and importance
-- Also look at avg_user_impact and avg_total_user_cost to help determine importance
-- SQL Server is overly eager to add included columns, so beware
-- Do not just blindly add indexes that show up from this query!!!

-- SQL Server Index Design Guide
-- https://bit.ly/2qtZr4N



-- Get VLF Counts for all databases on the instance (Query 33) (VLF Counts)
-- (adapted from Michelle Ufford) 
CREATE TABLE #VLFInfo (RecoveryUnitID int, FileID  int,
					   FileSize bigint, StartOffset bigint,
					   FSeqNo      bigint, [Status]    bigint,
					   Parity      bigint, CreateLSN   numeric(38));
	 
CREATE TABLE #VLFCountResults(DatabaseName sysname, VLFCount int);
	 
EXEC sp_MSforeachdb N'Use [?]; 

				INSERT INTO #VLFInfo 
				EXEC sp_executesql N''DBCC LOGINFO([?])''; 
	 
				INSERT INTO #VLFCountResults 
				SELECT DB_NAME(), COUNT(*) 
				FROM #VLFInfo; 

				TRUNCATE TABLE #VLFInfo;'
	 
SELECT DatabaseName, VLFCount  
FROM #VLFCountResults
ORDER BY VLFCount DESC;
	 
DROP TABLE #VLFInfo;
DROP TABLE #VLFCountResults;
------

-- High VLF counts can affect write performance to the log file 
-- and they can make full database restores and crash recovery take much longer
-- Try to keep your VLF counts under 200 in most cases (depending on log file size)



-- Get CPU utilization by database (Query 34) (CPU Usage by Database)
WITH DB_CPU_Stats
AS
(SELECT pa.DatabaseID, DB_Name(pa.DatabaseID) AS [Database Name], SUM(qs.total_worker_time/1000) AS [CPU_Time_Ms]
 FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
 CROSS APPLY (SELECT CONVERT(int, value) AS [DatabaseID] 
              FROM sys.dm_exec_plan_attributes(qs.plan_handle)
              WHERE attribute = N'dbid') AS pa
 GROUP BY DatabaseID)
SELECT ROW_NUMBER() OVER(ORDER BY [CPU_Time_Ms] DESC) AS [CPU Rank],
       [Database Name], [CPU_Time_Ms] AS [CPU Time (ms)], 
       CAST([CPU_Time_Ms] * 1.0 / SUM([CPU_Time_Ms]) OVER() * 100.0 AS DECIMAL(5, 2)) AS [CPU Percent]
FROM DB_CPU_Stats
WHERE DatabaseID <> 32767 -- ResourceDB
ORDER BY [CPU Rank] OPTION (RECOMPILE);
------

-- Helps determine which database is using the most CPU resources on the instance


-- Get I/O utilization by database (Query 35) (IO Usage By Database)
WITH Aggregate_IO_Statistics
AS (SELECT DB_NAME(database_id) AS [Database Name],
    CAST(SUM(num_of_bytes_read + num_of_bytes_written) / 1048576 AS DECIMAL(12, 2)) AS [ioTotalMB],
    CAST(SUM(num_of_bytes_read ) / 1048576 AS DECIMAL(12, 2)) AS [ioReadMB],
    CAST(SUM(num_of_bytes_written) / 1048576 AS DECIMAL(12, 2)) AS [ioWriteMB]
    FROM sys.dm_io_virtual_file_stats(NULL, NULL) AS [DM_IO_STATS]
    GROUP BY database_id)
SELECT ROW_NUMBER() OVER (ORDER BY ioTotalMB DESC) AS [I/O Rank],
        [Database Name], ioTotalMB AS [Total I/O (MB)],
        CAST(ioTotalMB / SUM(ioTotalMB) OVER () * 100.0 AS DECIMAL(5, 2)) AS [Total I/O %],
        ioReadMB AS [Read I/O (MB)], 
		CAST(ioReadMB / SUM(ioReadMB) OVER () * 100.0 AS DECIMAL(5, 2)) AS [Read I/O %],
        ioWriteMB AS [Write I/O (MB)], 
		CAST(ioWriteMB / SUM(ioWriteMB) OVER () * 100.0 AS DECIMAL(5, 2)) AS [Write I/O %]
FROM Aggregate_IO_Statistics
ORDER BY [I/O Rank] OPTION (RECOMPILE);
------

-- Helps determine which database is using the most I/O resources on the instance
-- These numbers are cumulative since the last service restart
-- They include all I/O activity, not just the nominal I/O workload


-- Get total buffer usage by database for current instance  (Query 36) (Total Buffer Usage by Database)
-- This make take some time to run on a busy instance
WITH AggregateBufferPoolUsage
AS
(SELECT DB_NAME(database_id) AS [Database Name],
CAST(COUNT(*) * 8/1024.0 AS DECIMAL (10,2))  AS [CachedSize]
FROM sys.dm_os_buffer_descriptors WITH (NOLOCK)
WHERE database_id <> 32767 -- ResourceDB
GROUP BY DB_NAME(database_id))
SELECT ROW_NUMBER() OVER(ORDER BY CachedSize DESC) AS [Buffer Pool Rank], [Database Name], CachedSize AS [Cached Size (MB)],
       CAST(CachedSize / SUM(CachedSize) OVER() * 100.0 AS DECIMAL(5,2)) AS [Buffer Pool Percent]
FROM AggregateBufferPoolUsage
ORDER BY [Buffer Pool Rank] OPTION (RECOMPILE);
------

-- Tells you how much memory (in the buffer pool) 
-- is being used by each database on the instance


-- Clear Wait Stats with this command
-- DBCC SQLPERF('sys.dm_os_wait_stats', CLEAR);

-- Isolate top waits for server instance since last restart or wait statistics clear  (Query 37) (Top Waits)
WITH [Waits] 
AS (SELECT wait_type, wait_time_ms/ 1000.0 AS [WaitS],
          (wait_time_ms - signal_wait_time_ms) / 1000.0 AS [ResourceS],
           signal_wait_time_ms / 1000.0 AS [SignalS],
           waiting_tasks_count AS [WaitCount],
           100.0 *  wait_time_ms / SUM (wait_time_ms) OVER() AS [Percentage],
           ROW_NUMBER() OVER(ORDER BY wait_time_ms DESC) AS [RowNum]
    FROM sys.dm_os_wait_stats WITH (NOLOCK)
    WHERE [wait_type] NOT IN (
        N'BROKER_EVENTHANDLER', N'BROKER_RECEIVE_WAITFOR', N'BROKER_TASK_STOP',
		N'BROKER_TO_FLUSH', N'BROKER_TRANSMITTER', N'CHECKPOINT_QUEUE',
        N'CHKPT', N'CLR_AUTO_EVENT', N'CLR_MANUAL_EVENT', N'CLR_SEMAPHORE',
        N'DBMIRROR_DBM_EVENT', N'DBMIRROR_EVENTS_QUEUE', N'DBMIRROR_WORKER_QUEUE',
		N'DBMIRRORING_CMD', N'DIRTY_PAGE_POLL', N'DISPATCHER_QUEUE_SEMAPHORE',
        N'EXECSYNC', N'FSAGENT', N'FT_IFTS_SCHEDULER_IDLE_WAIT', N'FT_IFTSHC_MUTEX',
        N'HADR_CLUSAPI_CALL', N'HADR_FILESTREAM_IOMGR_IOCOMPLETION', N'HADR_LOGCAPTURE_WAIT', 
		N'HADR_NOTIFICATION_DEQUEUE', N'HADR_TIMER_TASK', N'HADR_WORK_QUEUE',
        N'KSOURCE_WAKEUP', N'LAZYWRITER_SLEEP', N'LOGMGR_QUEUE', N'ONDEMAND_TASK_QUEUE',
        N'PREEMPTIVE_OS_QUERYREGISTRY', 
		N'PREEMPTIVE_HADR_LEASE_MECHANISM', N'PREEMPTIVE_SP_SERVER_DIAGNOSTICS',
		N'PWAIT_ALL_COMPONENTS_INITIALIZED', 
		N'QDS_PERSIST_TASK_MAIN_LOOP_SLEEP',
        N'QDS_CLEANUP_STALE_QUERIES_TASK_MAIN_LOOP_SLEEP', N'REQUEST_FOR_DEADLOCK_SEARCH',
		N'RESOURCE_QUEUE', N'SERVER_IDLE_CHECK', N'SLEEP_BPOOL_FLUSH', N'SLEEP_DBSTARTUP',
		N'SLEEP_DCOMSTARTUP', N'SLEEP_MASTERDBREADY', N'SLEEP_MASTERMDREADY',
        N'SLEEP_MASTERUPGRADED', N'SLEEP_MSDBSTARTUP', N'SLEEP_SYSTEMTASK', N'SLEEP_TASK',
        N'SLEEP_TEMPDBSTARTUP', N'SNI_HTTP_ACCEPT', N'SP_SERVER_DIAGNOSTICS_SLEEP',
		N'SQLTRACE_BUFFER_FLUSH', N'SQLTRACE_INCREMENTAL_FLUSH_SLEEP', N'SQLTRACE_WAIT_ENTRIES',
		N'WAIT_FOR_RESULTS', N'WAITFOR', N'WAITFOR_TASKSHUTDOWN', N'WAIT_XTP_HOST_WAIT',
		N'WAIT_XTP_OFFLINE_CKPT_NEW_LOG', N'WAIT_XTP_CKPT_CLOSE', N'XE_DISPATCHER_JOIN',
        N'XE_DISPATCHER_WAIT', N'XE_TIMER_EVENT')
    AND waiting_tasks_count > 0)
SELECT
    MAX (W1.wait_type) AS [WaitType],
	CAST (MAX (W1.Percentage) AS DECIMAL (5,2)) AS [Wait Percentage],
	CAST ((MAX (W1.WaitS) / MAX (W1.WaitCount)) AS DECIMAL (16,4)) AS [AvgWait_Sec],
    CAST ((MAX (W1.ResourceS) / MAX (W1.WaitCount)) AS DECIMAL (16,4)) AS [AvgRes_Sec],
    CAST ((MAX (W1.SignalS) / MAX (W1.WaitCount)) AS DECIMAL (16,4)) AS [AvgSig_Sec], 
    CAST (MAX (W1.WaitS) AS DECIMAL (16,2)) AS [Wait_Sec],
    CAST (MAX (W1.ResourceS) AS DECIMAL (16,2)) AS [Resource_Sec],
    CAST (MAX (W1.SignalS) AS DECIMAL (16,2)) AS [Signal_Sec],
    MAX (W1.WaitCount) AS [Wait Count],
	CAST (N'https://www.sqlskills.com/help/waits/' + W1.wait_type AS XML) AS [Help/Info URL]
FROM Waits AS W1
INNER JOIN Waits AS W2
ON W2.RowNum <= W1.RowNum
GROUP BY W1.RowNum, W1.wait_type
HAVING SUM (W2.Percentage) - MAX (W1.Percentage) < 99 -- percentage threshold
OPTION (RECOMPILE);
------

-- Cumulative wait stats are not as useful on an idle instance that is not under load or performance pressure

-- SQL Server Wait Types Library (Paul Randal)
-- https://www.sqlskills.com/help/waits/

-- The SQL Server Wait Type Repository
-- http://blogs.msdn.com/b/psssql/archive/2009/11/03/the-sql-server-wait-type-repository.aspx

-- Wait statistics, or please tell me where it hurts
-- http://www.sqlskills.com/blogs/paul/wait-statistics-or-please-tell-me-where-it-hurts/

-- SQL Server 2005 Performance Tuning using the Waits and Queues
-- http://technet.microsoft.com/en-us/library/cc966413.aspx

-- sys.dm_os_wait_stats (Transact-SQL)
-- http://msdn.microsoft.com/en-us/library/ms179984(v=sql.120).aspx



-- Get a count of SQL connections by IP address (Query 38) (Connection Counts by IP Address)
SELECT ec.client_net_address, es.[program_name], es.[host_name], es.login_name, 
COUNT(ec.session_id) AS [connection count] 
FROM sys.dm_exec_sessions AS es WITH (NOLOCK) 
INNER JOIN sys.dm_exec_connections AS ec WITH (NOLOCK) 
ON es.session_id = ec.session_id 
GROUP BY ec.client_net_address, es.[program_name], es.[host_name], es.login_name  
ORDER BY ec.client_net_address, es.[program_name] OPTION (RECOMPILE);
------

-- This helps you figure where your database load is coming from
-- and verifies connectivity from other machines

-- Solving Connectivity errors to SQL Server
-- https://bit.ly/2EgzoD0



-- Get Average Task Counts (run multiple times)  (Query 39) (Avg Task Counts)
SELECT AVG(current_tasks_count) AS [Avg Task Count], 
AVG(work_queue_count) AS [Avg Work Queue Count],
AVG(runnable_tasks_count) AS [Avg Runnable Task Count],
AVG(pending_disk_io_count) AS [Avg Pending DiskIO Count]
FROM sys.dm_os_schedulers WITH (NOLOCK)
WHERE scheduler_id < 255 OPTION (RECOMPILE);
------

-- Sustained values above 10 suggest further investigation in that area
-- High Avg Task Counts are often caused by blocking/deadlocking or other resource contention

-- Sustained values above 1 suggest further investigation in that area
-- High Avg Runnable Task Counts are a good sign of CPU pressure
-- High Avg Pending DiskIO Counts are a sign of disk pressure

-- How to Do Some Very Basic SQL Server Monitoring
-- https://bit.ly/2q3Btgt



-- Detect blocking (run multiple times)  (Query 40) (Detect Blocking)
SELECT t1.resource_type AS [lock type], DB_NAME(resource_database_id) AS [database],
t1.resource_associated_entity_id AS [blk object],t1.request_mode AS [lock req],  -- lock requested
t1.request_session_id AS [waiter sid], t2.wait_duration_ms AS [wait time],       -- spid of waiter  
(SELECT [text] FROM sys.dm_exec_requests AS r WITH (NOLOCK)                      -- get sql for waiter
CROSS APPLY sys.dm_exec_sql_text(r.[sql_handle]) 
WHERE r.session_id = t1.request_session_id) AS [waiter_batch],
(SELECT SUBSTRING(qt.[text],r.statement_start_offset/2, 
    (CASE WHEN r.statement_end_offset = -1 
    THEN LEN(CONVERT(nvarchar(max), qt.[text])) * 2 
    ELSE r.statement_end_offset END - r.statement_start_offset)/2) 
FROM sys.dm_exec_requests AS r WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(r.[sql_handle]) AS qt
WHERE r.session_id = t1.request_session_id) AS [waiter_stmt],					-- statement blocked
t2.blocking_session_id AS [blocker sid],										-- spid of blocker
(SELECT [text] FROM sys.sysprocesses AS p										-- get sql for blocker
CROSS APPLY sys.dm_exec_sql_text(p.[sql_handle]) 
WHERE p.spid = t2.blocking_session_id) AS [blocker_batch]
FROM sys.dm_tran_locks AS t1 WITH (NOLOCK)
INNER JOIN sys.dm_os_waiting_tasks AS t2 WITH (NOLOCK)
ON t1.lock_owner_address = t2.resource_address OPTION (RECOMPILE);
------

-- Helps troubleshoot blocking and deadlocking issues
-- The results will change from second to second on a busy system
-- You should run this query multiple times when you see signs of blocking



-- Get CPU Utilization History for last 256 minutes (in one minute intervals)  (Query 41) (CPU Utilization History)
DECLARE @ts_now bigint = (SELECT cpu_ticks/(cpu_ticks/ms_ticks) FROM sys.dm_os_sys_info WITH (NOLOCK)); 

SELECT TOP(256) SQLProcessUtilization AS [SQL Server Process CPU Utilization], 
               SystemIdle AS [System Idle Process], 
               100 - SystemIdle - SQLProcessUtilization AS [Other Process CPU Utilization], 
               DATEADD(ms, -1 * (@ts_now - [timestamp]), GETDATE()) AS [Event Time] 
FROM (SELECT record.value('(./Record/@id)[1]', 'int') AS record_id, 
			record.value('(./Record/SchedulerMonitorEvent/SystemHealth/SystemIdle)[1]', 'int') 
			AS [SystemIdle], 
			record.value('(./Record/SchedulerMonitorEvent/SystemHealth/ProcessUtilization)[1]', 'int') 
			AS [SQLProcessUtilization], [timestamp] 
	  FROM (SELECT [timestamp], CONVERT(xml, record) AS [record] 
			FROM sys.dm_os_ring_buffers WITH (NOLOCK)
			WHERE ring_buffer_type = N'RING_BUFFER_SCHEDULER_MONITOR' 
			AND record LIKE N'%<SystemHealth>%') AS x) AS y 
ORDER BY record_id DESC OPTION (RECOMPILE);
------

-- Look at the trend over the entire period 
-- Also look at high sustained 'Other Process' CPU Utilization values
-- Note: This query sometimes gives inaccurate results (negative values)
-- on high core count (> 64 cores) systems


-- Get top total worker time queries for entire instance (Query 42) (Top Worker Time Queries)
SELECT TOP(50) DB_NAME(t.[dbid]) AS [Database Name], 
REPLACE(REPLACE(LEFT(t.[text], 255), CHAR(10),''), CHAR(13),'') AS [Short Query Text],  
qs.total_worker_time AS [Total Worker Time], qs.min_worker_time AS [Min Worker Time],
qs.total_worker_time/qs.execution_count AS [Avg Worker Time], 
qs.max_worker_time AS [Max Worker Time], 
qs.min_elapsed_time AS [Min Elapsed Time], 
qs.total_elapsed_time/qs.execution_count AS [Avg Elapsed Time], 
qs.max_elapsed_time AS [Max Elapsed Time],
qs.min_logical_reads AS [Min Logical Reads],
qs.total_logical_reads/qs.execution_count AS [Avg Logical Reads],
qs.max_logical_reads AS [Max Logical Reads], 
qs.execution_count AS [Execution Count],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index], 
qs.creation_time AS [Creation Time]
--,t.[text] AS [Query Text], qp.query_plan AS [Query Plan] -- uncomment out these columns if not copying results to Excel
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(plan_handle) AS t 
CROSS APPLY sys.dm_exec_query_plan(plan_handle) AS qp 
ORDER BY qs.total_worker_time DESC OPTION (RECOMPILE);
------


-- Helps you find the most expensive queries from a CPU perspective across the entire instance
-- Can also help track down parameter sniffing issues



-- Page Life Expectancy (PLE) value for each NUMA node in current instance  (Query 43) (PLE by NUMA Node)
SELECT @@SERVERNAME AS [Server Name], RTRIM([object_name]) AS [Object Name], instance_name, cntr_value AS [Page Life Expectancy]
FROM sys.dm_os_performance_counters WITH (NOLOCK)
WHERE [object_name] LIKE N'%Buffer Node%' -- Handles named instances
AND counter_name = N'Page life expectancy' OPTION (RECOMPILE);
------

-- PLE is a good measurement of internal memory pressure
-- Higher PLE is better. Watch the trend over time, not the absolute value
-- This will only return one row for non-NUMA systems

-- Page Life Expectancy isn�t what you think�
-- https://bit.ly/2EgynLa


-- Memory Grants Pending value for current instance  (Query 44) (Memory Grants Pending)
SELECT @@SERVERNAME AS [Server Name], RTRIM([object_name]) AS [Object Name], cntr_value AS [Memory Grants Pending]                                                                                                       
FROM sys.dm_os_performance_counters WITH (NOLOCK)
WHERE [object_name] LIKE N'%Memory Manager%' -- Handles named instances
AND counter_name = N'Memory Grants Pending' OPTION (RECOMPILE);
------

-- Run multiple times, and run periodically if you suspect you are under memory pressure
-- Memory Grants Pending above zero for a sustained period is a very strong indicator of internal memory pressure


-- Memory Clerk Usage for instance  (Query 45) (Memory Clerk Usage)
-- Look for high value for CACHESTORE_SQLCP (Ad-hoc query plans)
SELECT TOP(10) mc.[type] AS [Memory Clerk Type], 
       CAST((SUM(mc.pages_kb)/1024.0) AS DECIMAL (15,2)) AS [Memory Usage (MB)] 
FROM sys.dm_os_memory_clerks AS mc WITH (NOLOCK)
GROUP BY mc.[type]  
ORDER BY SUM(mc.pages_kb) DESC OPTION (RECOMPILE);
------

-- MEMORYCLERK_SQLBUFFERPOOL was new for SQL Server 2012. It should be your highest consumer of memory

-- CACHESTORE_SQLCP  SQL Plans         
-- These are cached SQL statements or batches that aren't in stored procedures, functions and triggers
-- Watch out for high values for CACHESTORE_SQLCP
-- Enabling 'optimize for ad hoc workloads' at the instance level can help reduce this
-- Running DBCC FREESYSTEMCACHE ('SQL Plans') periodically may be required to better control this

-- CACHESTORE_OBJCP  Object Plans      
-- These are compiled plans for stored procedures, functions and triggers



-- Find single-use, ad-hoc and prepared queries that are bloating the plan cache  (Query 46) (Ad hoc Queries)
SELECT TOP(50) DB_NAME(t.[dbid]) AS [Database Name], t.[text] AS [Query Text], 
cp.objtype AS [Object Type], cp.cacheobjtype AS [Cache Object Type],  
cp.size_in_bytes/1024 AS [Plan Size in KB]
FROM sys.dm_exec_cached_plans AS cp WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(plan_handle) AS t
WHERE cp.cacheobjtype = N'Compiled Plan' 
AND cp.objtype IN (N'Adhoc', N'Prepared') 
AND cp.usecounts = 1
ORDER BY cp.size_in_bytes DESC, DB_NAME(t.[dbid]) OPTION (RECOMPILE);
------

-- Gives you the text, type and size of single-use ad-hoc and prepared queries that waste space in the plan cache
-- Enabling 'optimize for ad hoc workloads' for the instance can help (SQL Server 2008 and above only)
-- Running DBCC FREESYSTEMCACHE ('SQL Plans') periodically may be required to better control this
-- Enabling forced parameterization for the database can help, but test first!

-- Plan cache, adhoc workloads and clearing the single-use plan cache bloat
-- https://www.sqlskills.com/blogs/kimberly/plan-cache-adhoc-workloads-and-clearing-the-single-use-plan-cache-bloat/


-- Get top total logical reads queries for entire instance (Query 47) (Top Logical Reads Queries)
SELECT TOP(50) DB_NAME(t.[dbid]) AS [Database Name],
REPLACE(REPLACE(LEFT(t.[text], 255), CHAR(10),''), CHAR(13),'') AS [Short Query Text], 
qs.total_logical_reads AS [Total Logical Reads],
qs.min_logical_reads AS [Min Logical Reads],
qs.total_logical_reads/qs.execution_count AS [Avg Logical Reads],
qs.max_logical_reads AS [Max Logical Reads],   
qs.min_worker_time AS [Min Worker Time],
qs.total_worker_time/qs.execution_count AS [Avg Worker Time], 
qs.max_worker_time AS [Max Worker Time], 
qs.min_elapsed_time AS [Min Elapsed Time], 
qs.total_elapsed_time/qs.execution_count AS [Avg Elapsed Time], 
qs.max_elapsed_time AS [Max Elapsed Time],
qs.execution_count AS [Execution Count], 
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index],
qs.creation_time AS [Creation Time]
--,t.[text] AS [Complete Query Text], qp.query_plan AS [Query Plan] -- uncomment out these columns if not copying results to Excel
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(plan_handle) AS t 
CROSS APPLY sys.dm_exec_query_plan(plan_handle) AS qp 
ORDER BY qs.total_logical_reads DESC OPTION (RECOMPILE);
------


-- Helps you find the most expensive queries from a memory perspective across the entire instance
-- Can also help track down parameter sniffing issues


-- Get top average elapsed time queries for entire instance (Query 48) (Top Avg Elapsed Time Queries)
SELECT TOP(50) DB_NAME(t.[dbid]) AS [Database Name], 
REPLACE(REPLACE(LEFT(t.[text], 255), CHAR(10),''), CHAR(13),'') AS [Short Query Text],  
qs.total_elapsed_time/qs.execution_count AS [Avg Elapsed Time],
qs.min_elapsed_time, qs.max_elapsed_time, qs.last_elapsed_time,
qs.execution_count AS [Execution Count],  
qs.total_logical_reads/qs.execution_count AS [Avg Logical Reads], 
qs.total_physical_reads/qs.execution_count AS [Avg Physical Reads], 
qs.total_worker_time/qs.execution_count AS [Avg Worker Time],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index],
qs.creation_time AS [Creation Time]
--,t.[text] AS [Complete Query Text], qp.query_plan AS [Query Plan] -- uncomment out these columns if not copying results to Excel
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(plan_handle) AS t 
CROSS APPLY sys.dm_exec_query_plan(plan_handle) AS qp 
ORDER BY qs.total_elapsed_time/qs.execution_count DESC OPTION (RECOMPILE);
------

-- Helps you find the highest average elapsed time queries across the entire instance
-- Can also help track down parameter sniffing issues




-- Database specific queries *****************************************************************

-- **** Please switch to a user database that you are interested in! *****
--USE YourDatabaseName; -- make sure to change to an actual database on your instance, not the master system database
--GO

-- Individual File Sizes and space available for current database  (Query 49) (File Sizes and Space)
SELECT f.name AS [File Name] , f.physical_name AS [Physical Name], 
CAST((f.size/128.0) AS DECIMAL(15,2)) AS [Total Size in MB],
CAST(f.size/128.0 - CAST(FILEPROPERTY(f.name, 'SpaceUsed') AS int)/128.0 AS DECIMAL(15,2)) 
AS [Available Space In MB], f.[file_id], fg.name AS [Filegroup Name],
f.is_percent_growth, f.growth, fg.is_default, fg.is_read_only
FROM sys.database_files AS f WITH (NOLOCK) 
LEFT OUTER JOIN sys.filegroups AS fg WITH (NOLOCK)
ON f.data_space_id = fg.data_space_id
ORDER BY f.[file_id] OPTION (RECOMPILE);
------

-- Look at how large and how full the files are and where they are located
-- Make sure the transaction log is not full!!


-- I/O Statistics by file for the current database  (Query 50) (IO Stats By File)
SELECT DB_NAME(DB_ID()) AS [Database Name], df.name AS [Logical Name], vfs.[file_id], df.type_desc,
df.physical_name AS [Physical Name], CAST(vfs.size_on_disk_bytes/1048576.0 AS DECIMAL(10, 2)) AS [Size on Disk (MB)],
vfs.num_of_reads, vfs.num_of_writes, vfs.io_stall_read_ms, vfs.io_stall_write_ms,
CAST(100. * vfs.io_stall_read_ms/(vfs.io_stall_read_ms + vfs.io_stall_write_ms) AS DECIMAL(10,1)) AS [IO Stall Reads Pct],
CAST(100. * vfs.io_stall_write_ms/(vfs.io_stall_write_ms + vfs.io_stall_read_ms) AS DECIMAL(10,1)) AS [IO Stall Writes Pct],
(vfs.num_of_reads + vfs.num_of_writes) AS [Writes + Reads], 
CAST(vfs.num_of_bytes_read/1048576.0 AS DECIMAL(10, 2)) AS [MB Read], 
CAST(vfs.num_of_bytes_written/1048576.0 AS DECIMAL(10, 2)) AS [MB Written],
CAST(100. * vfs.num_of_reads/(vfs.num_of_reads + vfs.num_of_writes) AS DECIMAL(10,1)) AS [# Reads Pct],
CAST(100. * vfs.num_of_writes/(vfs.num_of_reads + vfs.num_of_writes) AS DECIMAL(10,1)) AS [# Write Pct],
CAST(100. * vfs.num_of_bytes_read/(vfs.num_of_bytes_read + vfs.num_of_bytes_written) AS DECIMAL(10,1)) AS [Read Bytes Pct],
CAST(100. * vfs.num_of_bytes_written/(vfs.num_of_bytes_read + vfs.num_of_bytes_written) AS DECIMAL(10,1)) AS [Written Bytes Pct]
FROM sys.dm_io_virtual_file_stats(DB_ID(), NULL) AS vfs
INNER JOIN sys.database_files AS df WITH (NOLOCK)
ON vfs.[file_id]= df.[file_id] OPTION (RECOMPILE);
------

-- This helps you characterize your workload better from an I/O perspective for this database
-- It helps you determine whether you has an OLTP or DW/DSS type of workload



-- Get most frequently executed queries for this database (Query 51) (Query Execution Counts)
SELECT TOP(50) LEFT(t.[text], 50) AS [Short Query Text], qs.execution_count AS [Execution Count],
qs.total_logical_reads AS [Total Logical Reads],
qs.total_logical_reads/qs.execution_count AS [Avg Logical Reads],
qs.total_worker_time AS [Total Worker Time],
qs.total_worker_time/qs.execution_count AS [Avg Worker Time], 
qs.total_elapsed_time AS [Total Elapsed Time],
qs.total_elapsed_time/qs.execution_count AS [Avg Elapsed Time],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index], 
qs.creation_time AS [Creation Time]
--,t.[text] AS [Complete Query Text], qp.query_plan AS [Query Plan] -- uncomment out these columns if not copying results to Excel
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(plan_handle) AS t 
CROSS APPLY sys.dm_exec_query_plan(plan_handle) AS qp 
WHERE t.dbid = DB_ID()
ORDER BY qs.execution_count DESC OPTION (RECOMPILE);
------


-- Queries 50 through 55 are the "Bad Man List" for stored procedures
-- Top Cached SPs By Execution Count (Query 52) (SP Execution Counts)
SELECT TOP(100) p.name AS [SP Name], qs.execution_count AS [Execution Count],
ISNULL(qs.execution_count/DATEDIFF(Minute, qs.cached_time, GETDATE()), 0) AS [Calls/Minute],
qs.total_elapsed_time/qs.execution_count AS [Avg Elapsed Time],
qs.total_worker_time/qs.execution_count AS [Avg Worker Time],    
qs.total_logical_reads/qs.execution_count AS [Avg Logical Reads],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index],
FORMAT(qs.last_execution_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Last Execution Time], 
FORMAT(qs.cached_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Plan Cached Time]
-- ,qp.query_plan AS [Query Plan] -- Uncomment if you want the Query Plan
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
CROSS APPLY sys.dm_exec_query_plan(qs.plan_handle) AS qp
WHERE qs.database_id = DB_ID()
AND DATEDIFF(Minute, qs.cached_time, GETDATE()) > 0
ORDER BY qs.execution_count DESC OPTION (RECOMPILE);
------

-- Tells you which cached stored procedures are called the most often
-- This helps you characterize and baseline your workload


-- Top Cached SPs By Avg Elapsed Time (Query 53) (SP Avg Elapsed Time)
SELECT TOP(25) p.name AS [SP Name], qs.min_elapsed_time, qs.total_elapsed_time/qs.execution_count AS [avg_elapsed_time], 
qs.max_elapsed_time, qs.last_elapsed_time, qs.total_elapsed_time, qs.execution_count, 
ISNULL(qs.execution_count/DATEDIFF(Minute, qs.cached_time, GETDATE()), 0) AS [Calls/Minute], 
qs.total_worker_time/qs.execution_count AS [AvgWorkerTime], 
qs.total_worker_time AS [TotalWorkerTime],
FORMAT(qs.last_execution_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Last Execution Time], 
FORMAT(qs.cached_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Plan Cached Time]
-- ,qp.query_plan AS [Query Plan] -- Uncomment if you want the Query Plan
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
CROSS APPLY sys.dm_exec_query_plan(qs.plan_handle) AS qp
WHERE qs.database_id = DB_ID()
AND DATEDIFF(Minute, qs.cached_time, GETDATE()) > 0
ORDER BY avg_elapsed_time DESC OPTION (RECOMPILE);
------

-- This helps you find high average elapsed time cached stored procedures that
-- may be easy to optimize with standard query tuning techniques



-- Top Cached SPs By Total Worker time. Worker time relates to CPU cost  (Query 54) (SP Worker Time)
SELECT TOP(25) p.name AS [SP Name], qs.total_worker_time AS [TotalWorkerTime], 
qs.total_worker_time/qs.execution_count AS [AvgWorkerTime], qs.execution_count, 
ISNULL(qs.execution_count/DATEDIFF(Minute, qs.cached_time, GETDATE()), 0) AS [Calls/Minute],
qs.total_elapsed_time, qs.total_elapsed_time/qs.execution_count AS [avg_elapsed_time],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index],
FORMAT(qs.last_execution_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Last Execution Time], 
FORMAT(qs.cached_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Plan Cached Time]
-- ,qp.query_plan AS [Query Plan] -- Uncomment if you want the Query Plan
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
CROSS APPLY sys.dm_exec_query_plan(qs.plan_handle) AS qp
WHERE qs.database_id = DB_ID()
AND DATEDIFF(Minute, qs.cached_time, GETDATE()) > 0
ORDER BY qs.total_worker_time DESC OPTION (RECOMPILE);
------

-- This helps you find the most expensive cached stored procedures from a CPU perspective
-- You should look at this if you see signs of CPU pressure


-- Top Cached SPs By Total Logical Reads. Logical reads relate to memory pressure  (Query 55) (SP Logical Reads)
SELECT TOP(25) p.name AS [SP Name], qs.total_logical_reads AS [TotalLogicalReads], 
qs.total_logical_reads/qs.execution_count AS [AvgLogicalReads],qs.execution_count, 
ISNULL(qs.execution_count/DATEDIFF(Minute, qs.cached_time, GETDATE()), 0) AS [Calls/Minute], 
qs.total_elapsed_time, qs.total_elapsed_time/qs.execution_count AS [avg_elapsed_time],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index], 
FORMAT(qs.last_execution_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Last Execution Time], 
FORMAT(qs.cached_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Plan Cached Time]
-- ,qp.query_plan AS [Query Plan] -- Uncomment if you want the Query Plan
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
CROSS APPLY sys.dm_exec_query_plan(qs.plan_handle) AS qp
WHERE qs.database_id = DB_ID()
AND DATEDIFF(Minute, qs.cached_time, GETDATE()) > 0
ORDER BY qs.total_logical_reads DESC OPTION (RECOMPILE);
------

-- This helps you find the most expensive cached stored procedures from a memory perspective
-- You should look at this if you see signs of memory pressure


-- Top Cached SPs By Total Physical Reads. Physical reads relate to disk read I/O pressure  (Query 56) (SP Physical Reads)
SELECT TOP(25) p.name AS [SP Name],qs.total_physical_reads AS [TotalPhysicalReads], 
qs.total_physical_reads/qs.execution_count AS [AvgPhysicalReads], qs.execution_count, 
qs.total_logical_reads,qs.total_elapsed_time, qs.total_elapsed_time/qs.execution_count AS [avg_elapsed_time],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index],
FORMAT(qs.last_execution_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Last Execution Time], 
FORMAT(qs.cached_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Plan Cached Time]
-- ,qp.query_plan AS [Query Plan] -- Uncomment if you want the Query Plan 
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
CROSS APPLY sys.dm_exec_query_plan(qs.plan_handle) AS qp
WHERE qs.database_id = DB_ID()
AND qs.total_physical_reads > 0
ORDER BY qs.total_physical_reads DESC, qs.total_logical_reads DESC OPTION (RECOMPILE);
------

-- This helps you find the most expensive cached stored procedures from a read I/O perspective
-- You should look at this if you see signs of I/O pressure or of memory pressure


       
-- Top Cached SPs By Total Logical Writes (Query 57) (SP Logical Writes)
-- Logical writes relate to both memory and disk I/O pressure 
SELECT TOP(25) p.name AS [SP Name], qs.total_logical_writes AS [TotalLogicalWrites], 
qs.total_logical_writes/qs.execution_count AS [AvgLogicalWrites], qs.execution_count,
ISNULL(qs.execution_count/DATEDIFF(Minute, qs.cached_time, GETDATE()), 0) AS [Calls/Minute],
qs.total_elapsed_time, qs.total_elapsed_time/qs.execution_count AS [avg_elapsed_time],
CASE WHEN CONVERT(nvarchar(max), qp.query_plan) LIKE N'%<MissingIndexes>%' THEN 1 ELSE 0 END AS [Has Missing Index], 
FORMAT(qs.last_execution_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Last Execution Time], 
FORMAT(qs.cached_time, 'yyyy-MM-dd HH:mm:ss', 'en-US') AS [Plan Cached Time]
-- ,qp.query_plan AS [Query Plan] -- Uncomment if you want the Query Plan 
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
CROSS APPLY sys.dm_exec_query_plan(qs.plan_handle) AS qp
WHERE qs.database_id = DB_ID()
AND qs.total_logical_writes > 0
AND DATEDIFF(Minute, qs.cached_time, GETDATE()) > 0
ORDER BY qs.total_logical_writes DESC OPTION (RECOMPILE);
------

-- This helps you find the most expensive cached stored procedures from a write I/O perspective
-- You should look at this if you see signs of I/O pressure or of memory pressure


-- Lists the top statements by average input/output usage for the current database  (Query 58) (Top IO Statements)
SELECT TOP(50) OBJECT_NAME(qt.objectid, dbid) AS [SP Name],
(qs.total_logical_reads + qs.total_logical_writes) /qs.execution_count AS [Avg IO], qs.execution_count AS [Execution Count],
SUBSTRING(qt.[text],qs.statement_start_offset/2, 
	(CASE 
		WHEN qs.statement_end_offset = -1 
	 THEN LEN(CONVERT(nvarchar(max), qt.[text])) * 2 
		ELSE qs.statement_end_offset 
	 END - qs.statement_start_offset)/2) AS [Query Text]	
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(qs.sql_handle) AS qt
WHERE qt.[dbid] = DB_ID()
ORDER BY [Avg IO] DESC OPTION (RECOMPILE);
------

-- Helps you find the most expensive statements for I/O by SP



-- Possible Bad NC Indexes (writes > reads)  (Query 59) (Bad NC Indexes)
SELECT OBJECT_NAME(s.[object_id]) AS [Table Name], i.name AS [Index Name], i.index_id, 
i.is_disabled, i.is_hypothetical, i.has_filter, i.fill_factor,
s.user_updates AS [Total Writes], s.user_seeks + s.user_scans + s.user_lookups AS [Total Reads],
s.user_updates - (s.user_seeks + s.user_scans + s.user_lookups) AS [Difference]
FROM sys.dm_db_index_usage_stats AS s WITH (NOLOCK)
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON s.[object_id] = i.[object_id]
AND i.index_id = s.index_id
WHERE OBJECTPROPERTY(s.[object_id],'IsUserTable') = 1
AND s.database_id = DB_ID()
AND s.user_updates > (s.user_seeks + s.user_scans + s.user_lookups)
AND i.index_id > 1 AND i.[type_desc] = N'NONCLUSTERED'
AND i.is_primary_key = 0 AND i.is_unique_constraint = 0 AND i.is_unique = 0
ORDER BY [Difference] DESC, [Total Writes] DESC, [Total Reads] ASC OPTION (RECOMPILE);
------

-- Look for indexes with high numbers of writes and zero or very low numbers of reads
-- Consider your complete workload, and how long your instance has been running
-- Investigate further before dropping an index!


-- Missing Indexes for current database by Index Advantage  (Query 60) (Missing Indexes)
SELECT CONVERT(decimal(18,2), user_seeks * avg_total_user_cost * (avg_user_impact * 0.01)) AS [index_advantage], 
migs.last_user_seek, mid.[statement] AS [Database.Schema.Table],
COUNT(1) OVER(PARTITION BY mid.[statement]) AS [missing_indexes_for_table],
COUNT(1) OVER(PARTITION BY mid.[statement], equality_columns) AS [similar_missing_indexes_for_table],
mid.equality_columns, mid.inequality_columns, mid.included_columns,
migs.unique_compiles, migs.user_seeks, 
CONVERT(decimal(18,2), migs.avg_total_user_cost) AS [avg_total_user_cost], migs.avg_user_impact,
OBJECT_NAME(mid.[object_id]) AS [Table Name], p.rows AS [Table Rows]
FROM sys.dm_db_missing_index_group_stats AS migs WITH (NOLOCK)
INNER JOIN sys.dm_db_missing_index_groups AS mig WITH (NOLOCK)
ON migs.group_handle = mig.index_group_handle
INNER JOIN sys.dm_db_missing_index_details AS mid WITH (NOLOCK)
ON mig.index_handle = mid.index_handle
INNER JOIN sys.partitions AS p WITH (NOLOCK)
ON p.[object_id] = mid.[object_id]
WHERE mid.database_id = DB_ID()
AND p.index_id < 2 
ORDER BY index_advantage DESC OPTION (RECOMPILE);
------

-- Look at index advantage, last user seek time, number of user seeks to help determine source and importance
-- SQL Server is overly eager to add included columns, so beware
-- Do not just blindly add indexes that show up from this query!!!


-- Find missing index warnings for cached plans in the current database  (Query 61) (Missing Index Warnings)
-- Note: This query could take some time on a busy instance
SELECT TOP(25) OBJECT_NAME(objectid) AS [ObjectName], 
               cp.objtype, cp.usecounts, cp.size_in_bytes, query_plan
FROM sys.dm_exec_cached_plans AS cp WITH (NOLOCK)
CROSS APPLY sys.dm_exec_query_plan(cp.plan_handle) AS qp
WHERE CAST(query_plan AS NVARCHAR(MAX)) LIKE N'%MissingIndex%'
AND dbid = DB_ID()
ORDER BY cp.usecounts DESC OPTION (RECOMPILE);
------

-- Helps you connect missing indexes to specific stored procedures or queries
-- This can help you decide whether to add them or not


-- Breaks down buffers used by current database by object (table, index) in the buffer cache  (Query 62) (Buffer Usage)
-- Note: This query could take some time on a busy instance
SELECT OBJECT_NAME(p.[object_id]) AS [Object Name], p.index_id, 
CAST(COUNT(*)/128.0 AS DECIMAL(10, 2)) AS [Buffer size(MB)],  
COUNT(*) AS [BufferCount], p.[Rows] AS [Row Count],
p.data_compression_desc AS [Compression Type]
FROM sys.allocation_units AS a WITH (NOLOCK)
INNER JOIN sys.dm_os_buffer_descriptors AS b WITH (NOLOCK)
ON a.allocation_unit_id = b.allocation_unit_id
INNER JOIN sys.partitions AS p WITH (NOLOCK)
ON a.container_id = p.hobt_id
WHERE b.database_id = CONVERT(int, DB_ID())
AND p.[object_id] > 100
AND OBJECT_NAME(p.[object_id]) NOT LIKE N'plan_%'
AND OBJECT_NAME(p.[object_id]) NOT LIKE N'sys%'
AND OBJECT_NAME(p.[object_id]) NOT LIKE N'xml_index_nodes%'
GROUP BY p.[object_id], p.index_id, p.data_compression_desc, p.[Rows]
ORDER BY [BufferCount] DESC OPTION (RECOMPILE);
------

-- Tells you what tables and indexes are using the most memory in the buffer cache
-- It can help identify possible candidates for data compression


-- Get Table names, row counts, and compression status for clustered index or heap  (Query 63) (Table Sizes)
SELECT OBJECT_NAME(object_id) AS [ObjectName], 
SUM(Rows) AS [RowCount], data_compression_desc AS [CompressionType]
FROM sys.partitions WITH (NOLOCK)
WHERE index_id < 2 --ignore the partitions from the non-clustered index if any
AND OBJECT_NAME(object_id) NOT LIKE N'sys%'
AND OBJECT_NAME(object_id) NOT LIKE N'queue_%' 
AND OBJECT_NAME(object_id) NOT LIKE N'filestream_tombstone%' 
AND OBJECT_NAME(object_id) NOT LIKE N'fulltext%'
AND OBJECT_NAME(object_id) NOT LIKE N'ifts_comp_fragment%'
AND OBJECT_NAME(object_id) NOT LIKE N'filetable_updates%'
AND OBJECT_NAME(object_id) NOT LIKE N'xml_index_nodes%'
AND OBJECT_NAME(object_id) NOT LIKE N'sqlagent_job%'
AND OBJECT_NAME(object_id) NOT LIKE N'plan_persist%'
GROUP BY object_id, data_compression_desc
ORDER BY SUM(Rows) DESC OPTION (RECOMPILE);
------

-- Gives you an idea of table sizes, and possible data compression opportunities



-- Get some key table properties (Query 64) (Table Properties)
SELECT OBJECT_NAME(t.[object_id]) AS [ObjectName], p.[rows] AS [Table Rows], p.index_id, 
       p.data_compression_desc AS [Index Data Compression],
       t.create_date, t.lock_on_bulk_load, t.is_replicated, t.has_replication_filter, 
       t.is_tracked_by_cdc, t.lock_escalation_desc, t.is_filetable
FROM sys.tables AS t WITH (NOLOCK)
INNER JOIN sys.partitions AS p WITH (NOLOCK)
ON t.[object_id] = p.[object_id]
WHERE OBJECT_NAME(t.[object_id]) NOT LIKE N'sys%'
ORDER BY OBJECT_NAME(t.[object_id]), p.index_id OPTION (RECOMPILE);
------

-- Gives you some good information about your tables



-- When were Statistics last updated on all indexes?  (Query 65) (Statistics Update)
SELECT SCHEMA_NAME(o.Schema_ID) + N'.' + o.NAME AS [Object Name], o.type_desc AS [Object Type],
      i.name AS [Index Name], STATS_DATE(i.[object_id], i.index_id) AS [Statistics Date], 
      s.auto_created, s.no_recompute, s.user_created, s.is_temporary,
	  st.row_count, st.used_page_count
FROM sys.objects AS o WITH (NOLOCK)
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON o.[object_id] = i.[object_id]
INNER JOIN sys.stats AS s WITH (NOLOCK)
ON i.[object_id] = s.[object_id] 
AND i.index_id = s.stats_id
INNER JOIN sys.dm_db_partition_stats AS st WITH (NOLOCK)
ON o.[object_id] = st.[object_id]
AND i.[index_id] = st.[index_id]
WHERE o.[type] IN ('U', 'V')
AND st.row_count > 0
ORDER BY STATS_DATE(i.[object_id], i.index_id) DESC OPTION (RECOMPILE);
------  

-- Helps discover possible problems with out-of-date statistics
-- Also gives you an idea which indexes are the most active

-- sys.stats (Transact-SQL)
-- https://msdn.microsoft.com/en-us/library/ms177623.aspx



-- Look at most frequently modified indexes and statistics (Query 66) (Volatile Indexes)
SELECT o.[name] AS [Object Name], o.[object_id], o.[type_desc], s.[name] AS [Statistics Name], 
       s.stats_id, s.no_recompute, s.auto_created, s.is_temporary,
	   sp.modification_counter, sp.[rows], sp.rows_sampled, sp.last_updated
FROM sys.objects AS o WITH (NOLOCK)
INNER JOIN sys.stats AS s WITH (NOLOCK)
ON s.object_id = o.object_id
CROSS APPLY sys.dm_db_stats_properties(s.object_id, s.stats_id) AS sp
WHERE o.[type_desc] NOT IN (N'SYSTEM_TABLE', N'INTERNAL_TABLE')
AND sp.modification_counter > 0
ORDER BY sp.modification_counter DESC, o.name OPTION (RECOMPILE);
------

-- This helps you understand your workload and make better decisions about 
-- things like data compression and adding new indexes to a table



-- Get fragmentation info for all indexes above a certain size in the current database  (Query 67) (Index Fragmentation)
-- Note: This query could take some time on a very large database
SELECT DB_NAME(ps.database_id) AS [Database Name], SCHEMA_NAME(o.[schema_id]) AS [Schema Name],
OBJECT_NAME(ps.OBJECT_ID) AS [Object Name], i.[name] AS [Index Name], ps.index_id, 
ps.index_type_desc, ps.avg_fragmentation_in_percent, 
ps.fragment_count, ps.page_count, i.fill_factor, i.has_filter, 
i.filter_definition, i.[allow_page_locks]
FROM sys.dm_db_index_physical_stats(DB_ID(),NULL, NULL, NULL , N'LIMITED') AS ps
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON ps.[object_id] = i.[object_id] 
AND ps.index_id = i.index_id
INNER JOIN sys.objects AS o WITH (NOLOCK)
ON i.[object_id] = o.[object_id]
WHERE ps.database_id = DB_ID()
AND ps.page_count > 2500
ORDER BY ps.avg_fragmentation_in_percent DESC OPTION (RECOMPILE);
------

-- Helps determine whether you have framentation in your relational indexes
-- and how effective your index maintenance strategy is


--- Index Read/Write stats (all tables in current DB) ordered by Reads  (Query 68) (Overall Index Usage - Reads)
SELECT OBJECT_NAME(i.[object_id]) AS [ObjectName], i.[name] AS [IndexName], i.index_id, 
       s.user_seeks, s.user_scans, s.user_lookups,
	   s.user_seeks + s.user_scans + s.user_lookups AS [Total Reads], 
	   s.user_updates AS [Writes],  
	   i.[type_desc] AS [Index Type], i.fill_factor AS [Fill Factor], i.has_filter, i.filter_definition, 
	   s.last_user_scan, s.last_user_lookup, s.last_user_seek
FROM sys.indexes AS i WITH (NOLOCK)
LEFT OUTER JOIN sys.dm_db_index_usage_stats AS s WITH (NOLOCK)
ON i.[object_id] = s.[object_id]
AND i.index_id = s.index_id
AND s.database_id = DB_ID()
WHERE OBJECTPROPERTY(i.[object_id],'IsUserTable') = 1
ORDER BY s.user_seeks + s.user_scans + s.user_lookups DESC OPTION (RECOMPILE); -- Order by reads
------

-- Show which indexes in the current database are most active for Reads


--- Index Read/Write stats (all tables in current DB) ordered by Writes  (Query 69) (Overall Index Usage - Writes)
SELECT OBJECT_NAME(i.[object_id]) AS [ObjectName], i.[name] AS [IndexName], i.index_id,
	   s.user_updates AS [Writes], s.user_seeks + s.user_scans + s.user_lookups AS [Total Reads], 
	   i.[type_desc] AS [Index Type], i.fill_factor AS [Fill Factor], i.has_filter, i.filter_definition,
	   s.last_system_update, s.last_user_update
FROM sys.indexes AS i WITH (NOLOCK)
LEFT OUTER JOIN sys.dm_db_index_usage_stats AS s WITH (NOLOCK)
ON i.[object_id] = s.[object_id]
AND i.index_id = s.index_id
AND s.database_id = DB_ID()
WHERE OBJECTPROPERTY(i.[object_id],'IsUserTable') = 1
ORDER BY s.user_updates DESC OPTION (RECOMPILE);						 -- Order by writes
------

-- Show which indexes in the current database are most active for Writes


-- Get lock waits for current database (Query 70) (Lock Waits)
SELECT o.name AS [table_name], i.name AS [index_name], ios.index_id, ios.partition_number,
		SUM(ios.row_lock_wait_count) AS [total_row_lock_waits], 
		SUM(ios.row_lock_wait_in_ms) AS [total_row_lock_wait_in_ms],
		SUM(ios.page_lock_wait_count) AS [total_page_lock_waits],
		SUM(ios.page_lock_wait_in_ms) AS [total_page_lock_wait_in_ms],
		SUM(ios.page_lock_wait_in_ms)+ SUM(row_lock_wait_in_ms) AS [total_lock_wait_in_ms]
FROM sys.dm_db_index_operational_stats(DB_ID(), NULL, NULL, NULL) AS ios
INNER JOIN sys.objects AS o WITH (NOLOCK)
ON ios.[object_id] = o.[object_id]
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON ios.[object_id] = i.[object_id] 
AND ios.index_id = i.index_id
WHERE o.[object_id] > 100
GROUP BY o.name, i.name, ios.index_id, ios.partition_number
HAVING SUM(ios.page_lock_wait_in_ms)+ SUM(row_lock_wait_in_ms) > 0
ORDER BY total_lock_wait_in_ms DESC OPTION (RECOMPILE);
------

-- This query is helpful for troubleshooting blocking and deadlocking issues


-- Look at recent Full backups for the current database (Query 71) (Recent Full Backups)
SELECT TOP (30) bs.machine_name, bs.server_name, bs.database_name AS [Database Name], bs.recovery_model,
CONVERT (BIGINT, bs.backup_size / 1048576 ) AS [Uncompressed Backup Size (MB)],
CONVERT (BIGINT, bs.compressed_backup_size / 1048576 ) AS [Compressed Backup Size (MB)],
CONVERT (NUMERIC (20,2), (CONVERT (FLOAT, bs.backup_size) /
CONVERT (FLOAT, bs.compressed_backup_size))) AS [Compression Ratio], bs.has_backup_checksums, bs.is_copy_only,
DATEDIFF (SECOND, bs.backup_start_date, bs.backup_finish_date) AS [Backup Elapsed Time (sec)],
bs.backup_finish_date AS [Backup Finish Date], bmf.physical_device_name AS [Backup Location], bmf.physical_block_size
FROM msdb.dbo.backupset AS bs WITH (NOLOCK)
INNER JOIN msdb.dbo.backupmediafamily AS bmf WITH (NOLOCK)
ON bs.media_set_id = bmf.media_set_id  
WHERE bs.database_name = DB_NAME(DB_ID())
AND bs.[type] = 'D' -- Change to L if you want Log backups
ORDER BY bs.backup_finish_date DESC OPTION (RECOMPILE);
------

-- Are your backup sizes and times changing over time?
-- Are you using backup compression?
-- Are you using backup checksums?
-- Are you doing copy_only backups?
-- Have you done any backup tuning with striped backups, or changing the parameters of the backup command?


-- These four Pluralsight Courses go into more detail about how to run these queries and interpret the results

-- SQL Server 2017: Diagnosing Configuration Issues with DMVs
-- https://bit.ly/2MSUDUL

-- SQL Server 2014 DMV Diagnostic Queries � Part 1 
-- https://bit.ly/2plxCer

-- SQL Server 2014 DMV Diagnostic Queries � Part 2
-- https://bit.ly/2IuJpzI

-- SQL Server 2014 DMV Diagnostic Queries � Part 3
-- https://bit.ly/2FIlCPb



-- Sign up for Microsoft Visual Studio Dev Essentials and get a free three month pass to Pluralsight

-- Microsoft Visual Studio Dev Essentials
-- http://bit.ly/1q6xbDL


-- Sign up for Microsoft Azure Essentials and get lots of free Azure usage credits, MCP exam voucher, three month Pluralsight subscription

-- Microsoft Azure Essentials
-- https://bit.ly/2JMWe8x


-- August 2017 blog series about upgrading and migrating to SQL Server 2016/2017
-- https://bit.ly/2ftKVrX

tools\dbatools\bin\smo\Microsoft.SqlServer.Management.AzureAuthenticationManagement.dll

md5: 42DC8D5A51A02839A0F8CAD3193B0FDA | sha1: 7242310B52222C13120CBF8E9C2BBFC78B817BB4 | sha256: 7AC2D22FC6F209D9529CB75D41E2690AEBCBC8A50B52163FE46D370135ADB2C8 | sha512: 2292FE5EE8625F85C6FEA6F1D98CF9950C58606984E3ADEBA7AF4316EC164216B9E3BEAE02A5687BEA0BF7329C80867316267B3F2C508509D8B4D0D21C43D374

tools\dbatools\bin\smo\Microsoft.SqlServer.Management.CloudAdapter.Client.dll

md5: C4E8BDA8352BAFC6479935E5BE681DE1 | sha1: D749BAB24DEA51365FC552F0DF27F7FBF7CC8C8D | sha256: A835EFA42DF0A03511F2000074FA2797C1CC0E191ADA5CC6855F1DD5BE718297 | sha512: 74921AB418C54B830F93C6CF9D75D5C6DF65A87A50FF00F6FD9B1E8BB3946FFB2DB1F45C536C8ED971E0E5633D807B8E770F58322271C8391C9C60C063CF5136

tools\dbatools\bin\smo\Microsoft.SqlServer.Management.CloudAdapter.Data.dll

md5: 39833C208E63430932C4610B13609E74 | sha1: 3D788DA305935DCCC55D37A04E0A5F55642F7101 | sha256: B540D094ED65DAEA033124DCD59644501C33E5C675BA02658C020875E9036CEA | sha512: 4DF23A3A0C2E43C30D85FCF5626F688C1BBA58E1945097887F9FE86D40CBA1DF6D05B281DFB100AEDB3DE2185C9C3A6FE039751DD96AAC04719C6843B57A0563

tools\dbatools\bin\smo\Microsoft.SqlServer.Management.Collector.dll

md5: 5E8707E3C01D543CB2CC187C9D751B13 | sha1: 48F677C285B243B3A9CB7E7F0A669885A36AEE30 | sha256: EA358BD759BF39E7AF61847FFD212D9F3F6792365818540FE4B7D34786B4D021 | sha512: DC42259F540C80C539B64B315A5AA721F57731B5B72C6A9C7F7AEA86001212C1B695A9575C452BB8B07983545945E58A1AD8CE3A9E741EA4B76952E2B94D2A88

tools\dbatools\bin\smo\Microsoft.SqlServer.Management.CollectorEnum.dll

md5: F694E2DC474791E6DCF7AE2B45C87166 | sha1: 513ACDA265B9CA1737596876B5C7C6AF1A910DCA | sha256: B2CED4D657A9C6B088B34AFCF08C7861CB2D3C0AB86368E4CE29B071143A6B9A | sha512: 19ED17B7F89FB9C4A069DBDA9C039A9CB5BF5E0D2EF08A5400737A553371D8D75F8CC798B3BDD3FB776494F37323792A69A3501CD4AAD13D77B0EEE6802A1096

tools\dbatools\bin\smo\Microsoft.SqlServer.Management.Dac.UniversalAuthProvider.dll

md5: E0B91845A09F9781E17E4D97A2DDDDB1 | sha1: 805CDED255C6E96405300DD38282DFB4448E42A8 | sha256: 118B5F900233D8829B441E2DF8D8112BD8D80D6EF01425288AF9516D582803A0 | sha512: F02AA7E0B8164C60056A59C23547C0AE3C1FE6CE8C6B2DB298FCF84DA4B7066126415497B5149BB4DB3DE13304744A6B4FED5CF5F9B4C639E89F33B725724A8B

tools\dbatools\bin\smo\Microsoft.SqlServer.Management.HadrDmf.dll

md5: 668EDCC24CA7631D69A3AFD2A397FF64 | sha1: 4763D19FE90E5E3F60D2CCF1ECF68675A5254ACC | sha256: 43C3A35AFD6AE0E3687FCF10C68BDF77FB05867DE38BFC76BC23583B217D3B35 | sha512: E3A7DA94F4D1BAB7E689970E0A933737A870ED586D14F0203EBC62CC54CDFA4A8C2290D2DABF654F1D35AAA134DB7C768B8789658FDE8D294B0BC4B4CE2CDA2D

tools\dbatools\bin\smo\Microsoft.SqlServer.Management.InMemoryOLTPMigrationAdvisor.dll

md5: 27744AA6BD5F100B8A80F1AFA3921EBE | sha1: 4BA98603E4D11DB78D51DD0547E9AFF49DC2DE78 | sha256: 19F283BE677540BF8889C71806BB66EA8D3E59B92EF6F6058E66F7CF9B3839BB | sha512: CE8F9663B537AD710D97992F53829DB11C64DD6259DB060289C6BCF566FF3253511D5F242058D084AA1B08AE3B0EE6CFAF7F65AC5F3C8B5C18B1112CED2B2B27

tools\dbatools\bin\smo\Microsoft.SqlServer.Management.IntegrationServices.dll

md5: E3DDA0352B0088E2E98172332F431E6E | sha1: CF97B69757F6A4646F655B07DF305D29636BCE9A | sha256: 4DCE941B84109D54DD51461A548BFD8BB24E278A5C29CB125BE021913662DF29 | sha512: DB9B8DB6E0946F1C27D16C0E5EEFD56458185CFA01AC4F54CC3EE5FB721BC296B675C9BA0764DF46D3CD10040B144E81290E1F11CA5E64C344461EEBE4B439FD

tools\dbatools\bin\diagnosticquery\SQLServerDiagnosticQueries_2008_201810.sql


-- SQL Server 2008 Diagnostic Information Queries
-- Glenn Berry 
-- Last Modified: November 11, 2018
-- https://sqlserverperformance.wordpress.com/
-- https://www.sqlskills.com/blogs/glenn/
-- Twitter: GlennAlanBerry

-- Please listen to my Pluralsight courses
-- https://www.pluralsight.com/author/glenn-berry

-- If you want to find all of our SQLskills SQL101 blog posts, check out https://www.sqlskills.com/help/sql101/

-- Many of these queries will not work if you have databases in 80 compatibility mode
-- Please make sure you are using the correct version of these diagnostic queries for your version of SQL Server

--******************************************************************************
--*   Copyright (C) 2018 Glenn Berry, SQLskills.com
--*   All rights reserved. 
--*
--*   For more scripts and sample code, check out 
--*      https://www.sqlskills.com/blogs/glenn
--*
--*   You may alter this code for your own *non-commercial* purposes. You may
--*   republish altered code as long as you include this copyright and give due credit. 
--*
--*
--*   THIS CODE AND INFORMATION ARE PROVIDED "AS IS" WITHOUT WARRANTY OF 
--*   ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED 
--*   TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A
--*   PARTICULAR PURPOSE. 
--*
--******************************************************************************

-- Check the major product version to see if it is SQL Server 2008
IF NOT EXISTS (SELECT * WHERE CONVERT(varchar(128), SERVERPROPERTY('ProductVersion')) LIKE '10%')
	BEGIN
		DECLARE @ProductVersion varchar(128) = CONVERT(varchar(128), SERVERPROPERTY('ProductVersion'));
		RAISERROR ('Script does not match the ProductVersion [%s] of this instance. Many of these queries may not work on this version.' , 18 , 16 , @ProductVersion);
	END
	ELSE
		PRINT N'You have the correct major version of SQL Server for this diagnostic information script';


-- Instance level queries *******************************

-- SQL and OS Version information for current instance  (Query 1) (Version Info)
SELECT @@SERVERNAME AS [Server Name], @@VERSION AS [SQL Server and OS Version Info];
------


-- SQL Server 2008 RTM Builds       SQL Server 2008 SP1 Builds       SQL Server 2008 SP2 Builds		      SQL Server 2008 SP3 Builds						SQL Server 2008 SP4 Builds
-- Build           Description      Build          Description		 Build     Description			      Build		    Description							Build		Description
-- 10.0.1600        Gold RTM
-- 10.0.1763        RTM CU1
-- 10.0.1779        RTM CU2
-- 10.0.1787        RTM CU3    -->	10.0.2531		SP1 RTM
-- 10.0.1798        RTM CU4    -->	10.0.2710       SP1 CU1
-- 10.0.1806        RTM CU5    -->	10.0.2714       SP1 CU2 
-- 10.0.1812		RTM CU6    -->	10.0.2723       SP1 CU3
-- 10.0.1818        RTM CU7    -->	10.0.2734       SP1 CU4
-- 10.0.1823        RTM CU8    -->	10.0.2746		SP1 CU5
-- 10.0.1828		RTM CU9    -->	10.0.2757		SP1 CU6
-- 10.0.1835	    RTM CU10   -->	10.0.2766		SP1 CU7
-- RTM Branch Retired          -->	10.0.2775		SP1 CU8		-->  10.0.4000	   SP2 RTM
--								    10.0.2789		SP1 CU9
--								    10.0.2799		SP1 CU10	
--								    10.0.2804		SP1 CU11	-->  10.0.4266     SP2 CU1		
--								    10.0.2808		SP1 CU12	-->  10.0.4272	   SP2 CU2	
--								    10.0.2816	    SP1 CU13    -->  10.0.4279     SP2 CU3	
--								    10.0.2821		SP1 CU14	-->  10.0.4285	   SP2 CU4	-->				10.0.5500		SP3 RTM
--								    10.0.2847		SP1 CU15	-->  10.0.4316	   SP2 CU5  
--								    10.0.2850		SP1 CU16	-->  10.0.4321	   SP2 CU6	-->				10.0.5766		SP3 CU1	      10/17/2011
--                                  SP1 Branch Retired          -->  10.0.4323     SP2 CU7  -->             10.0.5768       SP3 CU2       11/21/2011
--                                                                   10.0.4326	   SP2 CU8  -->             10.0.5770		SP3 CU3       1/16/2012
--														             10.0.4330	   SP2 CU9  -->				10.0.5775		SP3 CU4       3/19/2012
--															         10.0.4332	   SP2 CU10 -->             10.0.5785       SP3 CU5		  5/21/2012
--															         10.0.4333     SP2 CU11 -->			    10.0.5788       SP3 CU6		  7/16/2012
--															         SP2 Branch Retired					    10.0.5794       SP3 CU7		  9/17/2012
--																								            10.0.5828       SP3 CU8		  11/19/2012
--																								            10.0.5829       SP3 CU9       1/21/2013
--																								            10.0.5835       SP3 CU10      3/19/2013
--                                                                                                          10.0.5841       SP3 CU11      5/20/2013
--                                                                                                          10.0.5844       SP3 CU12      7/15/2013
--                                                                                                          10.0.5846       SP3 CU13      9/16/2013
--                                                                                                          10.0.5848       SP3 CU14      11/18/2013
--                                                                                                          10.0.5850		SP3 CU15      1/20/2014
--                                                                                                          10.0.5852       SP3 CU16      3/17/2014
--                                                                                                          10.0.5861       SP3 CU17      5/19/2014			
--                                                                                                          10.0.5867       SP3 CU17+					  10.0.6000		SP4 RTM		9/30/2014
--                                                                                                                                                        10.0.6526     SP4 + HF    2/9/2015 
-- Security Update for SQL Server 2008 SP4 (KB4057114)  https://www.microsoft.com/en-us/download/details.aspx?id=56418                                    10.0.6556		SP4 + HF	1/5/2018
--
-- SQL Server 2008 RTM is considered an "unsupported service pack" as of April 13, 2010
-- SQL Server 2008 SP1 is considered an "unsupported service pack" as of September 19, 2011
-- SQL Server 2008 SP2 is considered an "unsupported service pack" as of September 17, 2012
-- Any build older than 10.0.5500 is on an "unsupported service pack"

-- SQL Server 2008 fell out of Mainstream Support on July 8, 2014

-- The SQL Server 2008 builds that were released after SQL Server 2008 was released
-- http://support.microsoft.com/kb/956909
--
-- The SQL Server 2008 builds that were released after SQL Server 2008 Service Pack 1 was released
-- http://support.microsoft.com/kb/970365
--
-- The SQL Server 2008 builds that were released after SQL Server 2008 Service Pack 2 was released 
-- http://support.microsoft.com/kb/2402659	
--
-- The SQL Server 2008 builds that were released after SQL Server 2008 Service Pack 3 was released
-- http://support.microsoft.com/kb/2629969					   

-- Download SQL Server Management Studio (SSMS)
-- https://msdn.microsoft.com/en-us/library/mt238290.aspx



-- When was SQL Server installed  (Query 2) (SQL Server Install Date)   
SELECT @@SERVERNAME AS [Server Name], create_date AS [SQL Server Install Date] 
FROM sys.server_principals WITH (NOLOCK)
WHERE name = N'NT AUTHORITY\SYSTEM'
OR name = N'NT AUTHORITY\NETWORK SERVICE' OPTION (RECOMPILE);
------

-- Tells you the date and time that SQL Server was installed
-- It is a good idea to know how old your instance is


-- Get selected server properties (Query 3) (Server Properties)
SELECT SERVERPROPERTY('MachineName') AS [MachineName], SERVERPROPERTY('ServerName') AS [ServerName],  
SERVERPROPERTY('InstanceName') AS [Instance], SERVERPROPERTY('IsClustered') AS [IsClustered], 
SERVERPROPERTY('ComputerNamePhysicalNetBIOS') AS [ComputerNamePhysicalNetBIOS], 
SERVERPROPERTY('Edition') AS [Edition], SERVERPROPERTY('ProductLevel') AS [ProductLevel], 
SERVERPROPERTY('ProductVersion') AS [ProductVersion], SERVERPROPERTY('ProcessID') AS [ProcessID],
SERVERPROPERTY('Collation') AS [Collation], SERVERPROPERTY('IsFullTextInstalled') AS [IsFullTextInstalled], 
SERVERPROPERTY('IsIntegratedSecurityOnly') AS [IsIntegratedSecurityOnly];
------

-- This gives you a lot of useful information about your instance of SQL Server,
-- such as the ProcessID for SQL Server and your collation


-- Get SQL Server Agent jobs and Category information (Query 4) (SQL Server Agent Jobs)
SELECT sj.name AS [Job Name], sj.[description] AS [Job Description], SUSER_SNAME(sj.owner_sid) AS [Job Owner],
sj.date_created AS [Date Created], sj.[enabled] AS [Job Enabled], 
sj.notify_email_operator_id, sj.notify_level_email, sc.name AS [CategoryName],
s.[enabled] AS [Sched Enabled], js.next_run_date, js.next_run_time
FROM msdb.dbo.sysjobs AS sj WITH (NOLOCK)
INNER JOIN msdb.dbo.syscategories AS sc WITH (NOLOCK)
ON sj.category_id = sc.category_id
LEFT OUTER JOIN msdb.dbo.sysjobschedules AS js WITH (NOLOCK)
ON sj.job_id = js.job_id
LEFT OUTER JOIN msdb.dbo.sysschedules AS s WITH (NOLOCK)
ON js.schedule_id = s.schedule_id
ORDER BY sj.name OPTION (RECOMPILE);
------

-- Gives you some basic information about your SQL Server Agent jobs, who owns them and how they are configured
-- Look for Agent jobs that are not owned by sa
-- Look for jobs that have a notify_email_operator_id set to 0 (meaning no operator)
-- Look for jobs that have a notify_level_email set to 0 (meaning no e-mail is ever sent)
--
-- MSDN sysjobs documentation
-- http://msdn.microsoft.com/en-us/library/ms189817.aspx


-- Get SQL Server Agent Alert Information (Query 5) (SQL Server Agent Alerts)
SELECT name, event_source, message_id, severity, [enabled], has_notification, 
       delay_between_responses, occurrence_count, last_occurrence_date, last_occurrence_time
FROM msdb.dbo.sysalerts WITH (NOLOCK)
ORDER BY name OPTION (RECOMPILE);
------

-- Gives you some basic information about your SQL Server Agent Alerts (which are different from SQL Server Agent jobs)
-- Read more about Agent Alerts here: https://www.sqlskills.com/blogs/glenn/creating-sql-server-agent-alerts-for-critical-errors/


-- Returns a list of all global trace flags that are enabled (Query 6) (Global Trace Flags)
DBCC TRACESTATUS (-1);
------

-- If no global trace flags are enabled, no results will be returned.
-- It is very useful to know what global trace flags are currently enabled as part of the diagnostic process.

-- Common trace flags that should be enabled in most cases
-- TF 1117 - When growing a data file, grow all files at the same time so they remain the same size, reducing allocation contention points
--           http://support2.microsoft.com/kb/2154845
-- 
-- TF 1118 - Helps alleviate allocation contention in tempdb, SQL Server allocates full extents to each database object, 
--           thereby eliminating the contention on SGAM pages (more important with older versions of SQL Server)
--           Recommendations to reduce allocation contention in SQL Server tempdb database
--           http://support2.microsoft.com/kb/2154845

-- TF 2371 - Lowers auto update statistics threshold for large tables
--           http://blogs.msdn.com/b/saponsqlserver/archive/2011/09/07/changes-to-automatic-update-statistics-in-sql-server-traceflag-2371.aspx

-- TF 3226 - Supresses logging of successful database backup messages to the SQL Server Error Log
--           https://www.sqlskills.com/blogs/paul/fed-up-with-backup-success-messages-bloating-your-error-logs/


-- SQL Server NUMA Node information  (Query 7) (SQL Server NUMA Info)
SELECT node_id, node_state_desc, memory_node_id, online_scheduler_count, 
       active_worker_count, avg_load_balance, resource_monitor_state
FROM sys.dm_os_nodes WITH (NOLOCK) 
WHERE node_state_desc <> N'ONLINE DAC' OPTION (RECOMPILE);
------

-- Gives you some useful information about the composition 
-- and relative load on your NUMA nodes


-- Hardware information from SQL Server 2008  (Query 8) (Hardware Info)
-- (Cannot distinguish between HT and multi-core)
SELECT cpu_count AS [Logical CPU Count], hyperthread_ratio AS [Hyperthread Ratio],
cpu_count/hyperthread_ratio AS [Physical CPU Count], 
physical_memory_in_bytes/1048576 AS [Physical Memory (MB)], 
sqlserver_start_time,
DATEDIFF(hour, sqlserver_start_time, GETDATE()) AS [SQL Server Up Time (hrs)]
FROM sys.dm_os_sys_info WITH (NOLOCK) OPTION (RECOMPILE);
------

-- Gives you some good basic hardware information about your database server


-- Get System Manufacturer and model number from  (Query 9) (System Manufacturer)
-- SQL Server Error log. This query might take a few seconds 
-- if you have not recycled your error log recently
EXEC sys.xp_readerrorlog 0, 1, N'Manufacturer';
------ 

-- This can help you determine the capabilities
-- and capacities of your database server


-- Get processor description from Windows Registry  (Query 10) (Processor Description)
EXEC sys.xp_instance_regread N'HKEY_LOCAL_MACHINE', N'HARDWARE\DESCRIPTION\System\CentralProcessor\0', N'ProcessorNameString';
------

-- Gives you the model number and rated clock speed of your processor(s)
-- Your processors may be running at less that the rated clock speed due
-- to the Windows Power Plan or hardware power management

-- You can use CPU-Z to get your actual CPU core speed and a lot of other useful information
-- http://www.cpuid.com/softwares/cpu-z.html

-- You can learn more about processor selection for SQL Server by following this link
-- https://www.sqlskills.com/blogs/glenn/processor-selection-for-sql-server/



-- Get the current node name from your cluster nodes  (Query 11) (Cluster Node Properties)
-- (if your database server is in a failover cluster)
SELECT NodeName
FROM sys.dm_os_cluster_nodes WITH (NOLOCK) OPTION (RECOMPILE);
------

-- Knowing which node owns the cluster resources is critical
-- Especially when you are installing Windows or SQL Server updates
-- You will see no results if your instance is not clustered


-- Get configuration values for instance  (Query 12) (Configuration Values)
SELECT name, value, value_in_use, minimum, maximum, [description], is_dynamic, is_advanced
FROM sys.configurations WITH (NOLOCK)
ORDER BY name OPTION (RECOMPILE);
------

-- Focus on these settings:
-- backup compression default (should be 1 in most cases)
-- clr enabled (only enable if it is needed)
-- cost threshold for parallelism (depends on your workload)
-- lightweight pooling (should be zero)
-- max degree of parallelism (depends on your workload)
-- max server memory (MB) (set to an appropriate value, not the default)
-- optimize for ad hoc workloads (should be 1)
-- priority boost (should be zero)
-- remote admin connections (should be 1)





-- File names and paths for all user and system databases on instance   (Query 13) (Database Filenames and Paths)
SELECT DB_NAME([database_id]) AS [Database Name], 
       [file_id], [name], physical_name, [type_desc], state_desc,
	   is_percent_growth, growth,
	   CONVERT(bigint, growth/128.0) AS [Growth in MB], 
       CONVERT(bigint, size/128.0) AS [Total Size in MB]
FROM sys.master_files WITH (NOLOCK)
ORDER BY DB_NAME([database_id]), [file_id] OPTION (RECOMPILE);
------

-- Things to look at:
-- Are data files and log files on different drives?
-- Is everything on the C: drive?
-- Is TempDB on dedicated drives?
-- Is there only one TempDB data file?
-- Are all of the TempDB data files the same size?
-- Are there multiple data files for user databases?
-- Is percent growth enabled for any files (which is bad)?


-- Look for I/O requests taking longer than 15 seconds in the five most recent SQL Server Error Logs (Query 14) (IO Warnings)
CREATE TABLE #IOWarningResults(LogDate datetime, ProcessInfo sysname, LogText nvarchar(1000));

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 0, 1, N'taking longer than 15 seconds';

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 1, 1, N'taking longer than 15 seconds';

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 2, 1, N'taking longer than 15 seconds';

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 3, 1, N'taking longer than 15 seconds';

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 4, 1, N'taking longer than 15 seconds';

SELECT LogDate, ProcessInfo, LogText
FROM #IOWarningResults
ORDER BY LogDate DESC;

DROP TABLE #IOWarningResults;
------  

-- Finding 15 second I/O warnings in the SQL Server Error Log is useful evidence of
-- poor I/O performance (which might have many different causes)
-- Look to see if you see any patterns in the results (same files, same drives, same time of day, etc.)

-- Diagnostics in SQL Server help detect stalled and stuck I/O operations
-- https://support.microsoft.com/en-us/kb/897284


-- Drive level latency information (Query 15) (Drive Level Latency)
-- Based on code from Jimmy May
SELECT tab.[Drive], tab.volume_mount_point AS [Volume Mount Point], 
	CASE 
		WHEN num_of_reads = 0 THEN 0 
		ELSE (io_stall_read_ms/num_of_reads) 
	END AS [Read Latency],
	CASE 
		WHEN num_of_writes = 0 THEN 0 
		ELSE (io_stall_write_ms/num_of_writes) 
	END AS [Write Latency],
	CASE 
		WHEN (num_of_reads = 0 AND num_of_writes = 0) THEN 0 
		ELSE (io_stall/(num_of_reads + num_of_writes)) 
	END AS [Overall Latency],
	CASE 
		WHEN num_of_reads = 0 THEN 0 
		ELSE (num_of_bytes_read/num_of_reads) 
	END AS [Avg Bytes/Read],
	CASE 
		WHEN num_of_writes = 0 THEN 0 
		ELSE (num_of_bytes_written/num_of_writes) 
	END AS [Avg Bytes/Write],
	CASE 
		WHEN (num_of_reads = 0 AND num_of_writes = 0) THEN 0 
		ELSE ((num_of_bytes_read + num_of_bytes_written)/(num_of_reads + num_of_writes)) 
	END AS [Avg Bytes/Transfer]
FROM (SELECT LEFT(UPPER(mf.physical_name), 2) AS Drive, SUM(num_of_reads) AS num_of_reads,
	         SUM(io_stall_read_ms) AS io_stall_read_ms, SUM(num_of_writes) AS num_of_writes,
	         SUM(io_stall_write_ms) AS io_stall_write_ms, SUM(num_of_bytes_read) AS num_of_bytes_read,
	         SUM(num_of_bytes_written) AS num_of_bytes_written, SUM(io_stall) AS io_stall, vs.volume_mount_point 
      FROM sys.dm_io_virtual_file_stats(NULL, NULL) AS vfs
      INNER JOIN sys.master_files AS mf WITH (NOLOCK)
      ON vfs.database_id = mf.database_id AND vfs.file_id = mf.file_id
	  CROSS APPLY sys.dm_os_volume_stats(mf.database_id, mf.[file_id]) AS vs 
      GROUP BY LEFT(UPPER(mf.physical_name), 2), vs.volume_mount_point) AS tab
ORDER BY [Overall Latency] OPTION (RECOMPILE);
------

-- Shows you the drive-level latency for reads and writes, in milliseconds
-- Latency above 20-25ms is usually a problem


-- Calculates average stalls per read, per write, and per total input/output for each database file  (Query 16) (IO Stalls by File)
SELECT DB_NAME(fs.database_id) AS [Database Name], CAST(fs.io_stall_read_ms/(1.0 + fs.num_of_reads) AS NUMERIC(10,1)) AS [avg_read_stall_ms],
CAST(fs.io_stall_write_ms/(1.0 + fs.num_of_writes) AS NUMERIC(10,1)) AS [avg_write_stall_ms],
CAST((fs.io_stall_read_ms + fs.io_stall_write_ms)/(1.0 + fs.num_of_reads + fs.num_of_writes) AS NUMERIC(10,1)) AS [avg_io_stall_ms],
CONVERT(DECIMAL(18,2), mf.size/128.0) AS [File Size (MB)], mf.physical_name, mf.type_desc, fs.io_stall_read_ms, fs.num_of_reads, 
fs.io_stall_write_ms, fs.num_of_writes, fs.io_stall_read_ms + fs.io_stall_write_ms AS [io_stalls], fs.num_of_reads + fs.num_of_writes AS [total_io]
FROM sys.dm_io_virtual_file_stats(null,null) AS fs
INNER JOIN sys.master_files AS mf WITH (NOLOCK)
ON fs.database_id = mf.database_id
AND fs.[file_id] = mf.[file_id]
ORDER BY avg_io_stall_ms DESC OPTION (RECOMPILE);
------

-- Helps determine which database files on the entire instance have the most I/O bottlenecks
-- This can help you decide whether certain LUNs are overloaded and whether you might
-- want to move some files to a different location or perhaps improve your I/O performance


-- Recovery model, log reuse wait description, log file size, log usage size  (Query 17) (Database Properties)
-- and compatibility level for all databases on instance
SELECT db.[name] AS [Database Name], SUSER_SNAME(db.owner_sid) AS [Database Owner], db.recovery_model_desc AS [Recovery Model], 
db.log_reuse_wait_desc AS [Log Reuse Wait Description], 
ls.cntr_value AS [Log Size (KB)], lu.cntr_value AS [Log Used (KB)],
CAST(CAST(lu.cntr_value AS FLOAT) / CAST(ls.cntr_value AS FLOAT)AS DECIMAL(18,2)) * 100 AS [Log Used %], 
db.[compatibility_level] AS [DB Compatibility Level], 
db.page_verify_option_desc AS [Page Verify Option], db.is_auto_create_stats_on, db.is_auto_update_stats_on,
db.is_auto_update_stats_async_on, db.is_parameterization_forced, 
db.snapshot_isolation_state_desc, db.is_read_committed_snapshot_on,
db.is_auto_close_on, db.is_auto_shrink_on, db.is_cdc_enabled, db.is_published
FROM sys.databases AS db WITH (NOLOCK)
INNER JOIN sys.dm_os_performance_counters AS lu WITH (NOLOCK)
ON db.name = lu.instance_name
INNER JOIN sys.dm_os_performance_counters AS ls WITH (NOLOCK) 
ON db.name = ls.instance_name
WHERE lu.counter_name LIKE N'Log File(s) Used Size (KB)%' 
AND ls.counter_name LIKE N'Log File(s) Size (KB)%'
AND ls.cntr_value > 0 OPTION (RECOMPILE);
------

-- Things to look at:
-- How many databases are on the instance?
-- What recovery models are they using?
-- What is the log reuse wait description?
-- How full are the transaction logs ?
-- What compatibility level are the databases on? 
-- What is the Page Verify Option? (should be CHECKSUM)
-- Is Auto Update Statistics Asynchronously enabled?
-- Make sure auto_shrink and auto_close are not enabled!



-- Missing Indexes for all databases by Index Advantage  (Query 18) (Missing Indexes All Databases)
SELECT CONVERT(decimal(18,2), user_seeks * avg_total_user_cost * (avg_user_impact * 0.01)) AS [index_advantage], 
migs.last_user_seek, mid.[statement] AS [Database.Schema.Table],
mid.equality_columns, mid.inequality_columns, mid.included_columns,
migs.unique_compiles, migs.user_seeks, migs.avg_total_user_cost, migs.avg_user_impact
FROM sys.dm_db_missing_index_group_stats AS migs WITH (NOLOCK)
INNER JOIN sys.dm_db_missing_index_groups AS mig WITH (NOLOCK)
ON migs.group_handle = mig.index_group_handle
INNER JOIN sys.dm_db_missing_index_details AS mid WITH (NOLOCK)
ON mig.index_handle = mid.index_handle
ORDER BY index_advantage DESC OPTION (RECOMPILE);
------

-- Getting missing index information for all of the databases on the instance is very useful
-- Look at last user seek time, number of user seeks to help determine source and importance
-- Also look at avg_user_impact and avg_total_user_cost to help determine importance
-- SQL Server is overly eager to add included columns, so beware
-- Do not just blindly add indexes that show up from this query!!!



-- Get VLF Counts for all databases on the instance (Query 19) (VLF Counts)
-- (adapted from Michelle Ufford) 
CREATE TABLE #VLFInfo (FileID  int,
					   FileSize bigint, StartOffset bigint,
					   FSeqNo      bigint, [Status]    bigint,
					   Parity      bigint, CreateLSN   numeric(38));
	 
CREATE TABLE #VLFCountResults(DatabaseName sysname, VLFCount int);
	 
EXEC sp_MSforeachdb N'Use [?]; 

				INSERT INTO #VLFInfo 
				EXEC sp_executesql N''DBCC LOGINFO([?])''; 
	 
				INSERT INTO #VLFCountResults 
				SELECT DB_NAME(), COUNT(*) 
				FROM #VLFInfo; 

				TRUNCATE TABLE #VLFInfo;'
	 
SELECT DatabaseName, VLFCount  
FROM #VLFCountResults
ORDER BY VLFCount DESC;
	 
DROP TABLE #VLFInfo;
DROP TABLE #VLFCountResults;
------

-- High VLF counts can affect write performance 
-- and they can make full database restores and crash recovery take much longer
-- Try to keep your VLF counts under 200 in most cases



-- Get CPU utilization by database (Query 20) (CPU Usage by Database)
WITH DB_CPU_Stats
AS
(SELECT pa.DatabaseID, DB_Name(pa.DatabaseID) AS [Database Name], SUM(qs.total_worker_time/1000) AS [CPU_Time_Ms]
 FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
 CROSS APPLY (SELECT CONVERT(int, value) AS [DatabaseID] 
              FROM sys.dm_exec_plan_attributes(qs.plan_handle)
              WHERE attribute = N'dbid') AS pa
 GROUP BY DatabaseID)
SELECT ROW_NUMBER() OVER(ORDER BY [CPU_Time_Ms] DESC) AS [CPU Rank],
       [Database Name], [CPU_Time_Ms] AS [CPU Time (ms)], 
       CAST([CPU_Time_Ms] * 1.0 / SUM([CPU_Time_Ms]) OVER() * 100.0 AS DECIMAL(5, 2)) AS [CPU Percent]
FROM DB_CPU_Stats
WHERE DatabaseID <> 32767 -- ResourceDB
ORDER BY [CPU Rank] OPTION (RECOMPILE);
------

-- Helps determine which database is using the most CPU resources on the instance


-- Get I/O utilization by database (Query 21) (IO Usage By Database)
WITH Aggregate_IO_Statistics
AS
(SELECT DB_NAME(database_id) AS [Database Name],
CAST(SUM(num_of_bytes_read + num_of_bytes_written)/1048576 AS DECIMAL(12, 2)) AS io_in_mb
FROM sys.dm_io_virtual_file_stats(NULL, NULL) AS [DM_IO_STATS]
GROUP BY database_id)
SELECT ROW_NUMBER() OVER(ORDER BY io_in_mb DESC) AS [I/O Rank], [Database Name], io_in_mb AS [Total I/O (MB)],
       CAST(io_in_mb/ SUM(io_in_mb) OVER() * 100.0 AS DECIMAL(5,2)) AS [I/O Percent]
FROM Aggregate_IO_Statistics
ORDER BY [I/O Rank] OPTION (RECOMPILE);
------

-- Helps determine which database is using the most I/O resources on the instance


-- Get total buffer usage by database for current instance  (Query 22) (Total Buffer Usage by Database)
-- This make take some time to run on a busy instance
WITH AggregateBufferPoolUsage
AS
(SELECT DB_NAME(database_id) AS [Database Name],
CAST(COUNT(*) * 8/1024.0 AS DECIMAL (10,2))  AS [CachedSize]
FROM sys.dm_os_buffer_descriptors WITH (NOLOCK)
WHERE database_id <> 32767 -- ResourceDB
GROUP BY DB_NAME(database_id))
SELECT ROW_NUMBER() OVER(ORDER BY CachedSize DESC) AS [Buffer Pool Rank], [Database Name], CachedSize AS [Cached Size (MB)],
       CAST(CachedSize / SUM(CachedSize) OVER() * 100.0 AS DECIMAL(5,2)) AS [Buffer Pool Percent]
FROM AggregateBufferPoolUsage
ORDER BY [Buffer Pool Rank] OPTION (RECOMPILE);
------

-- Tells you how much memory (in the buffer pool) 
-- is being used by each database on the instance


-- Clear Wait Stats with this command
-- DBCC SQLPERF('sys.dm_os_wait_stats', CLEAR);

-- Isolate top waits for server instance since last restart or wait statistics clear (Query 23) (Top Waits)
WITH [Waits] 
AS (SELECT wait_type, wait_time_ms/ 1000.0 AS [WaitS],
          (wait_time_ms - signal_wait_time_ms) / 1000.0 AS [ResourceS],
           signal_wait_time_ms / 1000.0 AS [SignalS],
           waiting_tasks_count AS [WaitCount],
           100.0 *  wait_time_ms / SUM (wait_time_ms) OVER() AS [Percentage],
           ROW_NUMBER() OVER(ORDER BY wait_time_ms DESC) AS [RowNum]
    FROM sys.dm_os_wait_stats WITH (NOLOCK)
    WHERE [wait_type] NOT IN (
        N'BROKER_EVENTHANDLER', N'BROKER_RECEIVE_WAITFOR', N'BROKER_TASK_STOP',
		N'BROKER_TO_FLUSH', N'BROKER_TRANSMITTER', N'CHECKPOINT_QUEUE',
        N'CHKPT', N'CLR_AUTO_EVENT', N'CLR_MANUAL_EVENT', N'CLR_SEMAPHORE',
        N'DBMIRROR_DBM_EVENT', N'DBMIRROR_EVENTS_QUEUE', N'DBMIRROR_WORKER_QUEUE',
		N'DBMIRRORING_CMD', N'DIRTY_PAGE_POLL', N'DISPATCHER_QUEUE_SEMAPHORE',
        N'EXECSYNC', N'FSAGENT', N'FT_IFTS_SCHEDULER_IDLE_WAIT', N'FT_IFTSHC_MUTEX',
        N'HADR_CLUSAPI_CALL', N'HADR_FILESTREAM_IOMGR_IOCOMPLETION', N'HADR_LOGCAPTURE_WAIT', 
		N'HADR_NOTIFICATION_DEQUEUE', N'HADR_TIMER_TASK', N'HADR_WORK_QUEUE',
        N'KSOURCE_WAKEUP', N'LAZYWRITER_SLEEP', N'LOGMGR_QUEUE', N'ONDEMAND_TASK_QUEUE',
        N'PWAIT_ALL_COMPONENTS_INITIALIZED', N'QDS_PERSIST_TASK_MAIN_LOOP_SLEEP',
        N'QDS_CLEANUP_STALE_QUERIES_TASK_MAIN_LOOP_SLEEP', N'REQUEST_FOR_DEADLOCK_SEARCH',
		N'RESOURCE_QUEUE', N'SERVER_IDLE_CHECK', N'SLEEP_BPOOL_FLUSH', N'SLEEP_DBSTARTUP',
		N'SLEEP_DCOMSTARTUP', N'SLEEP_MASTERDBREADY', N'SLEEP_MASTERMDREADY',
        N'SLEEP_MASTERUPGRADED', N'SLEEP_MSDBSTARTUP', N'SLEEP_SYSTEMTASK', N'SLEEP_TASK',
        N'SLEEP_TEMPDBSTARTUP', N'SNI_HTTP_ACCEPT', N'SP_SERVER_DIAGNOSTICS_SLEEP',
		N'SQLTRACE_BUFFER_FLUSH', N'SQLTRACE_INCREMENTAL_FLUSH_SLEEP', N'SQLTRACE_WAIT_ENTRIES',
		N'WAIT_FOR_RESULTS', N'WAITFOR', N'WAITFOR_TASKSHUTDOWN', N'WAIT_XTP_HOST_WAIT',
		N'WAIT_XTP_OFFLINE_CKPT_NEW_LOG', N'WAIT_XTP_CKPT_CLOSE', N'XE_DISPATCHER_JOIN',
        N'XE_DISPATCHER_WAIT', N'XE_TIMER_EVENT')
    AND waiting_tasks_count > 0)
SELECT
    MAX (W1.wait_type) AS [WaitType],
	CAST (MAX (W1.Percentage) AS DECIMAL (5,2)) AS [Wait Percentage],
	CAST ((MAX (W1.WaitS) / MAX (W1.WaitCount)) AS DECIMAL (16,4)) AS [AvgWait_Sec],
    CAST ((MAX (W1.ResourceS) / MAX (W1.WaitCount)) AS DECIMAL (16,4)) AS [AvgRes_Sec],
    CAST ((MAX (W1.SignalS) / MAX (W1.WaitCount)) AS DECIMAL (16,4)) AS [AvgSig_Sec], 
    CAST (MAX (W1.WaitS) AS DECIMAL (16,2)) AS [Wait_Sec],
    CAST (MAX (W1.ResourceS) AS DECIMAL (16,2)) AS [Resource_Sec],
    CAST (MAX (W1.SignalS) AS DECIMAL (16,2)) AS [Signal_Sec],
    MAX (W1.WaitCount) AS [Wait Count],
	CAST (N'https://www.sqlskills.com/help/waits/' + W1.wait_type AS XML) AS [Help/Info URL]
FROM Waits AS W1
INNER JOIN Waits AS W2
ON W2.RowNum <= W1.RowNum
GROUP BY W1.RowNum, W1.wait_type
HAVING SUM (W2.Percentage) - MAX (W1.Percentage) < 99 -- percentage threshold
OPTION (RECOMPILE);
------

-- Cumulative wait stats are not as useful on an idle instance that is not under load or performance pressure

-- SQL Server Wait Types Library (Paul Randal)
-- https://www.sqlskills.com/help/waits/

-- The SQL Server Wait Type Repository
-- http://blogs.msdn.com/b/psssql/archive/2009/11/03/the-sql-server-wait-type-repository.aspx

-- Wait statistics, or please tell me where it hurts
-- https://www.sqlskills.com/blogs/paul/wait-statistics-or-please-tell-me-where-it-hurts/

-- SQL Server 2005 Performance Tuning using the Waits and Queues
-- http://technet.microsoft.com/en-us/library/cc966413.aspx

-- sys.dm_os_wait_stats (Transact-SQL)
-- http://msdn.microsoft.com/en-us/library/ms179984(v=sql.105).aspx




-- Signal Waits for instance  (Query 24) (Signal Waits)
SELECT CAST(100.0 * SUM(signal_wait_time_ms) / SUM (wait_time_ms) AS NUMERIC(20,2)) AS [% Signal (CPU) Waits],
CAST(100.0 * SUM(wait_time_ms - signal_wait_time_ms) / SUM (wait_time_ms) AS NUMERIC(20,2)) AS [% Resource Waits]
FROM sys.dm_os_wait_stats WITH (NOLOCK)
WHERE wait_type NOT IN (
        N'BROKER_EVENTHANDLER', N'BROKER_RECEIVE_WAITFOR', N'BROKER_TASK_STOP',
		N'BROKER_TO_FLUSH', N'BROKER_TRANSMITTER', N'CHECKPOINT_QUEUE',
        N'CHKPT', N'CLR_AUTO_EVENT', N'CLR_MANUAL_EVENT', N'CLR_SEMAPHORE',
        N'DBMIRROR_DBM_EVENT', N'DBMIRROR_EVENTS_QUEUE', N'DBMIRROR_WORKER_QUEUE',
		N'DBMIRRORING_CMD', N'DIRTY_PAGE_POLL', N'DISPATCHER_QUEUE_SEMAPHORE',
        N'EXECSYNC', N'FSAGENT', N'FT_IFTS_SCHEDULER_IDLE_WAIT', N'FT_IFTSHC_MUTEX',
        N'HADR_CLUSAPI_CALL', N'HADR_FILESTREAM_IOMGR_IOCOMPLETION', N'HADR_LOGCAPTURE_WAIT', 
		N'HADR_NOTIFICATION_DEQUEUE', N'HADR_TIMER_TASK', N'HADR_WORK_QUEUE',
        N'KSOURCE_WAKEUP', N'LAZYWRITER_SLEEP', N'LOGMGR_QUEUE', N'ONDEMAND_TASK_QUEUE',
        N'PWAIT_ALL_COMPONENTS_INITIALIZED', N'QDS_PERSIST_TASK_MAIN_LOOP_SLEEP',
        N'QDS_CLEANUP_STALE_QUERIES_TASK_MAIN_LOOP_SLEEP', N'REQUEST_FOR_DEADLOCK_SEARCH',
		N'RESOURCE_QUEUE', N'SERVER_IDLE_CHECK', N'SLEEP_BPOOL_FLUSH', N'SLEEP_DBSTARTUP',
		N'SLEEP_DCOMSTARTUP', N'SLEEP_MASTERDBREADY', N'SLEEP_MASTERMDREADY',
        N'SLEEP_MASTERUPGRADED', N'SLEEP_MSDBSTARTUP', N'SLEEP_SYSTEMTASK', N'SLEEP_TASK',
        N'SLEEP_TEMPDBSTARTUP', N'SNI_HTTP_ACCEPT', N'SP_SERVER_DIAGNOSTICS_SLEEP',
		N'SQLTRACE_BUFFER_FLUSH', N'SQLTRACE_INCREMENTAL_FLUSH_SLEEP', N'SQLTRACE_WAIT_ENTRIES',
		N'WAIT_FOR_RESULTS', N'WAITFOR', N'WAITFOR_TASKSHUTDOWN', N'WAIT_XTP_HOST_WAIT',
		N'WAIT_XTP_OFFLINE_CKPT_NEW_LOG', N'WAIT_XTP_CKPT_CLOSE', N'XE_DISPATCHER_JOIN',
        N'XE_DISPATCHER_WAIT', N'XE_TIMER_EVENT') OPTION (RECOMPILE);
------

-- Signal Waits above 10-15% is usually a confirming sign of CPU pressure
-- Cumulative wait stats are not as useful on an idle instance that is not under load or performance pressure
-- Resource waits are non-CPU related waits


--  Get logins that are connected and how many sessions they have (Query 25) (Connection Counts)
SELECT login_name, [program_name], COUNT(session_id) AS [session_count] 
FROM sys.dm_exec_sessions WITH (NOLOCK)
GROUP BY login_name, [program_name]
ORDER BY COUNT(session_id) DESC OPTION (RECOMPILE);
------

-- This can help characterize your workload and
-- determine whether you are seeing a normal level of activity


-- Get a count of SQL connections by IP address (Query 26) (Connection Counts by IP Address)
SELECT ec.client_net_address, es.[program_name], es.[host_name], es.login_name, 
COUNT(ec.session_id) AS [connection count] 
FROM sys.dm_exec_sessions AS es WITH (NOLOCK) 
INNER JOIN sys.dm_exec_connections AS ec WITH (NOLOCK) 
ON es.session_id = ec.session_id 
GROUP BY ec.client_net_address, es.[program_name], es.[host_name], es.login_name  
ORDER BY ec.client_net_address, es.[program_name] OPTION (RECOMPILE);
------

-- This helps you figure where your database load is coming from
-- and verifies connectivity from other machines


-- Get Average Task Counts (run multiple times) (Query 27) (Avg Task Counts)
SELECT AVG(current_tasks_count) AS [Avg Task Count], 
AVG(runnable_tasks_count) AS [Avg Runnable Task Count],
AVG(pending_disk_io_count) AS [Avg Pending DiskIO Count]
FROM sys.dm_os_schedulers WITH (NOLOCK)
WHERE scheduler_id < 255 OPTION (RECOMPILE);
------

-- Sustained values above 10 suggest further investigation in that area
-- High Avg Task Counts are often caused by blocking/deadlocking or other resource contention

-- Sustained values above 1 suggest further investigation in that area
-- High Avg Runnable Task Counts are a good sign of CPU pressure
-- High Avg Pending DiskIO Counts are a sign of disk pressure

-- How to Do Some Very Basic SQL Server Monitoring
-- https://www.sqlskills.com/blogs/glenn/how-to-do-some-very-basic-sql-server-monitoring/



-- Get CPU Utilization History for last 256 minutes (in one minute intervals)  (Query 28) (CPU Utilization History)
-- This version works with SQL Server 2008
DECLARE @ts_now bigint = (SELECT cpu_ticks/(cpu_ticks/ms_ticks) FROM sys.dm_os_sys_info WITH (NOLOCK)); 

SELECT TOP(256) SQLProcessUtilization AS [SQL Server Process CPU Utilization], 
               SystemIdle AS [System Idle Process], 
               100 - SystemIdle - SQLProcessUtilization AS [Other Process CPU Utilization], 
               DATEADD(ms, -1 * (@ts_now - [timestamp]), GETDATE()) AS [Event Time] 
FROM ( 
	  SELECT record.value('(./Record/@id)[1]', 'int') AS record_id, 
			record.value('(./Record/SchedulerMonitorEvent/SystemHealth/SystemIdle)[1]', 'int') 
			AS [SystemIdle], 
			record.value('(./Record/SchedulerMonitorEvent/SystemHealth/ProcessUtilization)[1]', 
			'int') 
			AS [SQLProcessUtilization], [timestamp] 
	  FROM ( 
			SELECT [timestamp], CONVERT(xml, record) AS [record] 
			FROM sys.dm_os_ring_buffers WITH (NOLOCK)
			WHERE ring_buffer_type = N'RING_BUFFER_SCHEDULER_MONITOR' 
			AND record LIKE N'%<SystemHealth>%') AS x 
	  ) AS y 
ORDER BY record_id DESC OPTION (RECOMPILE);
------

-- Look at the trend over the entire period. 
-- Also look at high sustained Other Process CPU Utilization values


-- Get top total worker time queries for entire instance (Query 29) (Top Worker Time Queries)
SELECT TOP(50) DB_NAME(t.[dbid]) AS [Database Name], t.[text] AS [Query Text],  
qs.total_worker_time AS [Total Worker Time], qs.min_worker_time AS [Min Worker Time],
qs.total_worker_time/qs.execution_count AS [Avg Worker Time], 
qs.max_worker_time AS [Max Worker Time], qs.execution_count AS [Execution Count], 
qs.total_elapsed_time/qs.execution_count AS [Avg Elapsed Time], 
qs.total_logical_reads/qs.execution_count AS [Avg Logical Reads], 
qs.total_physical_reads/qs.execution_count AS [Avg Physical Reads], qs.creation_time AS [Creation Time]
, qp.query_plan AS [Query Plan] -- comment out this column if copying results to Excel
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(plan_handle) AS t 
CROSS APPLY sys.dm_exec_query_plan(plan_handle) AS qp 
ORDER BY qs.total_worker_time DESC OPTION (RECOMPILE);
------


-- Helps you find the most expensive queries from a CPU perspective across the entire instance



-- Good basic information about OS memory amounts and state  (Query 30) (System Memory)
SELECT total_physical_memory_kb/1024 AS [Physical Memory (MB)], 
       available_physical_memory_kb/1024 AS [Available Memory (MB)], 
       total_page_file_kb/1024 AS [Total Page File (MB)], 
	   available_page_file_kb/1024 AS [Available Page File (MB)], 
	   system_cache_kb/1024 AS [System Cache (MB)],
       system_memory_state_desc AS [System Memory State]
FROM sys.dm_os_sys_memory WITH (NOLOCK) OPTION (RECOMPILE);
------

-- You want to see "Available physical memory is high"
-- This indicates that you are not under external memory pressure


-- SQL Server Process Address space info  (Query 31) (Process Memory) 
-- (shows whether locked pages is enabled, among other things)
SELECT physical_memory_in_use_kb/1024 AS [SQL Server Memory Usage (MB)],
       large_page_allocations_kb, locked_page_allocations_kb, page_fault_count, 
	   memory_utilization_percentage, available_commit_limit_kb, 
	   process_physical_memory_low, process_virtual_memory_low
FROM sys.dm_os_process_memory WITH (NOLOCK) OPTION (RECOMPILE);
------

-- You want to see 0 for process_physical_memory_low
-- You want to see 0 for process_virtual_memory_low
-- This indicates that you are not under internal memory pressure


-- Page Life Expectancy (PLE) value for each NUMA node in current instance  (Query 32) (PLE by NUMA Node)
SELECT @@SERVERNAME AS [Server Name], RTRIM([object_name]) AS [Object Name], instance_name, cntr_value AS [Page Life Expectancy]
FROM sys.dm_os_performance_counters WITH (NOLOCK)
WHERE [object_name] LIKE N'%Buffer Node%' -- Handles named instances
AND counter_name = N'Page life expectancy' OPTION (RECOMPILE);
------

-- PLE is a good measurement of memory pressure.
-- Higher PLE is better. Watch the trend over time, not the absolute value.
-- This will only return one row for non-NUMA systems.

-- Page Life Expectancy isn�t what you think�
-- http://www.sqlskills.com/blogs/paul/page-life-expectancy-isnt-what-you-think/



-- Memory Grants Pending value for current instance  (Query 33) (Memory Grants Pending)
SELECT @@SERVERNAME AS [Server Name], RTRIM([object_name]) AS [Object Name], cntr_value AS [Memory Grants Pending]                                                                                                       
FROM sys.dm_os_performance_counters WITH (NOLOCK)
WHERE [object_name] LIKE N'%Memory Manager%' -- Handles named instances
AND counter_name = N'Memory Grants Pending' OPTION (RECOMPILE);
------

-- Memory Grants Pending above zero for a sustained period is a very strong indicator of memory pressure


-- Memory Clerk Usage for instance  (Query 34) (Memory Clerk Usage)
-- Look for high value for CACHESTORE_SQLCP (Ad-hoc query plans)
SELECT TOP(10) [type] AS [Memory Clerk Type], SUM(single_pages_kb)/1024 AS [SPA Memory Usage (MB)] 
FROM sys.dm_os_memory_clerks WITH (NOLOCK)
GROUP BY [type]  
ORDER BY SUM(single_pages_kb) DESC OPTION (RECOMPILE);
------

-- CACHESTORE_SQLCP  SQL Plans         
-- These are cached SQL statements or batches that aren't in stored procedures, functions and triggers
-- Watch out for high values for CACHESTORE_SQLCP

-- CACHESTORE_OBJCP  Object Plans      
-- These are compiled plans for stored procedures, functions and triggers



-- Find single-use, ad-hoc and prepared queries that are bloating the plan cache  (Query 35) (Ad hoc Queries)
SELECT TOP(50) DB_NAME(t.[dbid]) AS [Database Name], t.[text] AS [Query Text], 
cp.objtype AS [Object Type], cp.cacheobjtype AS [Cache Object Type],  
cp.size_in_bytes/1024 AS [Plan Size in KB]
FROM sys.dm_exec_cached_plans AS cp WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(plan_handle) AS t
WHERE cp.cacheobjtype = N'Compiled Plan' 
AND cp.objtype IN (N'Adhoc', N'Prepared') 
AND cp.usecounts = 1
ORDER BY cp.size_in_bytes DESC, DB_NAME(t.[dbid]) OPTION (RECOMPILE);
------

-- Gives you the text, type and size of single-use ad-hoc and prepared queries that waste space in the plan cache
-- Enabling 'optimize for ad hoc workloads' for the instance can help (SQL Server 2008 and above only)
-- Running DBCC FREESYSTEMCACHE ('SQL Plans') periodically may be required to better control this.
-- Enabling forced parameterization for the database can help, but test first!

-- Plan cache, adhoc workloads and clearing the single-use plan cache bloat
-- https://www.sqlskills.com/blogs/kimberly/plan-cache-adhoc-workloads-and-clearing-the-single-use-plan-cache-bloat/



-- Database specific queries *****************************************************************

-- **** Please switch to a user database that you are interested in! *****
USE YourDatabaseName; -- make sure to change to an actual database on your instance, not the master system database
GO

-- Individual File Sizes and space available for current database  (Query 36) (File Sizes and Space)
SELECT f.name AS [File Name] , f.physical_name AS [Physical Name], 
CAST((f.size/128.0) AS DECIMAL(15,2)) AS [Total Size in MB],
CAST(f.size/128.0 - CAST(FILEPROPERTY(f.name, 'SpaceUsed') AS int)/128.0 AS DECIMAL(15,2)) 
AS [Available Space In MB], [file_id], fg.name AS [Filegroup Name]
FROM sys.database_files AS f WITH (NOLOCK) 
LEFT OUTER JOIN sys.data_spaces AS fg WITH (NOLOCK) 
ON f.data_space_id = fg.data_space_id OPTION (RECOMPILE);
------

-- Look at how large and how full the files are and where they are located
-- Make sure the transaction log is not full!!



-- I/O Statistics by file for the current database  (Query 37) (IO Stats By File)
SELECT DB_NAME(DB_ID()) AS [Database Name], df.name AS [Logical Name], vfs.[file_id], 
df.physical_name AS [Physical Name], vfs.num_of_reads, vfs.num_of_writes, vfs.io_stall_read_ms, vfs.io_stall_write_ms,
CAST(100. * vfs.io_stall_read_ms/(vfs.io_stall_read_ms + vfs.io_stall_write_ms) AS DECIMAL(10,1)) AS [IO Stall Reads Pct],
CAST(100. * vfs.io_stall_write_ms/(vfs.io_stall_write_ms + vfs.io_stall_read_ms) AS DECIMAL(10,1)) AS [IO Stall Writes Pct],
(vfs.num_of_reads + vfs.num_of_writes) AS [Writes + Reads], 
CAST(vfs.num_of_bytes_read/1048576.0 AS DECIMAL(10, 2)) AS [MB Read], 
CAST(vfs.num_of_bytes_written/1048576.0 AS DECIMAL(10, 2)) AS [MB Written],
CAST(100. * vfs.num_of_reads/(vfs.num_of_reads + vfs.num_of_writes) AS DECIMAL(10,1)) AS [# Reads Pct],
CAST(100. * vfs.num_of_writes/(vfs.num_of_reads + vfs.num_of_writes) AS DECIMAL(10,1)) AS [# Write Pct],
CAST(100. * vfs.num_of_bytes_read/(vfs.num_of_bytes_read + vfs.num_of_bytes_written) AS DECIMAL(10,1)) AS [Read Bytes Pct],
CAST(100. * vfs.num_of_bytes_written/(vfs.num_of_bytes_read + vfs.num_of_bytes_written) AS DECIMAL(10,1)) AS [Written Bytes Pct]
FROM sys.dm_io_virtual_file_stats(DB_ID(), NULL) AS vfs
INNER JOIN sys.database_files AS df WITH (NOLOCK)
ON vfs.[file_id]= df.[file_id] OPTION (RECOMPILE);
------

-- This helps you characterize your workload better from an I/O perspective for this database
-- It helps you determine whether you has an OLTP or DW/DSS type of workload



-- Top cached queries by Execution Count (SQL Server 2008)  (Query 38) (Query Execution Counts)
SELECT TOP (100) qs.execution_count, qs.total_worker_time, qs.total_logical_reads, qs.total_elapsed_time,
SUBSTRING(qt.TEXT,qs.statement_start_offset/2 +1,
(CASE WHEN qs.statement_end_offset = -1
			THEN LEN(CONVERT(NVARCHAR(MAX), qt.TEXT)) * 2
	  ELSE qs.statement_end_offset END - qs.statement_start_offset)/2) AS query_text 
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(qs.sql_handle) AS qt
ORDER BY qs.execution_count DESC OPTION (RECOMPILE);
------


-- Look at non-stored procedure queries


-- Top Cached SPs By Execution Count (SQL 2008) (Query 39) (SP Execution Counts)
SELECT TOP(100) p.name AS [SP Name], qs.execution_count,
ISNULL(qs.execution_count/DATEDIFF(Minute, qs.cached_time, GETDATE()), 0) AS [Calls/Minute],
qs.total_worker_time/qs.execution_count AS [AvgWorkerTime], qs.total_worker_time AS [TotalWorkerTime],  
qs.total_elapsed_time, qs.total_elapsed_time/qs.execution_count AS [avg_elapsed_time],
qs.cached_time
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
WHERE qs.database_id = DB_ID()
ORDER BY qs.execution_count DESC OPTION (RECOMPILE);
------

-- Tells you which cached stored procedures are called the most often
-- This helps you characterize and baseline your workload


-- Top Cached SPs By Avg Elapsed Time (SQL 2008)  (Query 40) (SP Avg Elapsed Time)
SELECT TOP(25) p.name AS [SP Name], qs.total_elapsed_time/qs.execution_count AS [avg_elapsed_time], 
qs.total_elapsed_time, qs.execution_count, ISNULL(qs.execution_count/DATEDIFF(Minute, qs.cached_time, 
GETDATE()), 0) AS [Calls/Minute], qs.total_worker_time/qs.execution_count AS [AvgWorkerTime], 
qs.total_worker_time AS [TotalWorkerTime], qs.cached_time
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
WHERE qs.database_id = DB_ID()
ORDER BY avg_elapsed_time DESC OPTION (RECOMPILE);
------

-- This helps you find long-running cached stored procedures that
-- may be easy to optimize with standard query tuning techniques


-- Top Cached SPs By Avg Elapsed Time with execution time variability   (Query 41) (SP Avg Elapsed Variable Time)
SELECT TOP(25) p.name AS [SP Name], qs.execution_count, qs.min_elapsed_time,
qs.total_elapsed_time/qs.execution_count AS [avg_elapsed_time],
qs.max_elapsed_time, qs.last_elapsed_time,  qs.cached_time
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
WHERE qs.database_id = DB_ID()
ORDER BY avg_elapsed_time DESC OPTION (RECOMPILE);
------

-- This gives you some interesting information about the variability in the
-- execution time of your cached stored procedures, which is useful for tuning


-- Top Cached SPs By Total Worker time (SQL 2008). Worker time relates to CPU cost  (Query 42) (SP Worker Time)
SELECT TOP(25) p.name AS [SP Name], qs.total_worker_time AS [TotalWorkerTime], 
qs.total_worker_time/qs.execution_count AS [AvgWorkerTime], qs.execution_count, 
ISNULL(qs.execution_count/DATEDIFF(Minute, qs.cached_time, GETDATE()), 0) AS [Calls/Minute],
qs.total_elapsed_time, qs.total_elapsed_time/qs.execution_count 
AS [avg_elapsed_time], qs.cached_time
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
WHERE qs.database_id = DB_ID()
ORDER BY qs.total_worker_time DESC OPTION (RECOMPILE);
------

-- This helps you find the most expensive cached stored procedures from a CPU perspective
-- You should look at this if you see signs of CPU pressure


-- Top Cached SPs By Total Logical Reads (SQL 2008). Logical reads relate to memory pressure  (Query 43) (SP Logical Reads)
SELECT TOP(25) p.name AS [SP Name], qs.total_logical_reads AS [TotalLogicalReads], 
qs.total_logical_reads/qs.execution_count AS [AvgLogicalReads],qs.execution_count, 
ISNULL(qs.execution_count/DATEDIFF(Minute, qs.cached_time, GETDATE()), 0) AS [Calls/Minute], 
qs.total_elapsed_time, qs.total_elapsed_time/qs.execution_count 
AS [avg_elapsed_time], qs.cached_time
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
WHERE qs.database_id = DB_ID()
ORDER BY qs.total_logical_reads DESC OPTION (RECOMPILE);
------

-- This helps you find the most expensive cached stored procedures from a memory perspective
-- You should look at this if you see signs of memory pressure


-- Top Cached SPs By Total Physical Reads (SQL 2008). Physical reads relate to disk I/O pressure  (Query 44) (SP Physical Reads)
SELECT TOP(25) p.name AS [SP Name],qs.total_physical_reads AS [TotalPhysicalReads], 
qs.total_physical_reads/qs.execution_count AS [AvgPhysicalReads], qs.execution_count, 
qs.total_logical_reads,qs.total_elapsed_time, qs.total_elapsed_time/qs.execution_count 
AS [avg_elapsed_time], qs.cached_time 
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
WHERE qs.database_id = DB_ID()
AND qs.total_physical_reads > 0
ORDER BY qs.total_physical_reads DESC, qs.total_logical_reads DESC OPTION (RECOMPILE);
------

-- This helps you find the most expensive cached stored procedures from a read I/O perspective
-- You should look at this if you see signs of I/O pressure or of memory pressure
       
-- Top Cached SPs By Total Logical Writes (SQL 2008)  (Query 45) (SP Logical Writes) 
-- Logical writes relate to both memory and disk I/O pressure 
SELECT TOP(25) p.name AS [SP Name], qs.total_logical_writes AS [TotalLogicalWrites], 
qs.total_logical_writes/qs.execution_count AS [AvgLogicalWrites], qs.execution_count,
ISNULL(qs.execution_count/DATEDIFF(Minute, qs.cached_time, GETDATE()), 0) AS [Calls/Minute],
qs.total_elapsed_time, qs.total_elapsed_time/qs.execution_count AS [avg_elapsed_time], 
qs.cached_time
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
WHERE qs.database_id = DB_ID()
AND qs.total_logical_writes > 0
ORDER BY qs.total_logical_writes DESC OPTION (RECOMPILE);
------

-- This helps you find the most expensive cached stored procedures from a write I/O perspective
-- You should look at this if you see signs of I/O pressure or of memory pressure


-- Lists the top statements by average input/output usage for the current database  (Query 46) (Top IO Statements)
SELECT TOP(50) OBJECT_NAME(qt.objectid, dbid) AS [SP Name],
(qs.total_logical_reads + qs.total_logical_writes) /qs.execution_count AS [Avg IO], qs.execution_count AS [Execution Count],
SUBSTRING(qt.[text],qs.statement_start_offset/2, 
	(CASE 
		WHEN qs.statement_end_offset = -1 
	 THEN LEN(CONVERT(nvarchar(max), qt.[text])) * 2 
		ELSE qs.statement_end_offset 
	 END - qs.statement_start_offset)/2) AS [Query Text]	
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(qs.sql_handle) AS qt
WHERE qt.[dbid] = DB_ID()
ORDER BY [Avg IO] DESC OPTION (RECOMPILE);
------

-- Helps you find the most expensive statements for I/O by SP



-- Possible Bad NC Indexes (writes > reads)  (Query 47) (Bad NC Indexes)
SELECT OBJECT_NAME(s.[object_id]) AS [Table Name], i.name AS [Index Name], i.index_id, 
i.is_disabled, i.is_hypothetical, i.has_filter, i.fill_factor,
user_updates AS [Total Writes], user_seeks + user_scans + user_lookups AS [Total Reads],
user_updates - (user_seeks + user_scans + user_lookups) AS [Difference]
FROM sys.dm_db_index_usage_stats AS s WITH (NOLOCK)
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON s.[object_id] = i.[object_id]
AND i.index_id = s.index_id
WHERE OBJECTPROPERTY(s.[object_id],'IsUserTable') = 1
AND s.database_id = DB_ID()
AND s.user_updates > (s.user_seeks + s.user_scans + s.user_lookups)
AND i.index_id > 1 AND i.[type_desc] = N'NONCLUSTERED'
AND i.is_primary_key = 0 AND i.is_unique_constraint = 0
ORDER BY [Difference] DESC, [Total Writes] DESC, [Total Reads] ASC OPTION (RECOMPILE);
------

-- Look for indexes with high numbers of writes and zero or very low numbers of reads
-- Consider your complete workload, and how long your instance has been running
-- Investigate further before dropping an index!


-- Missing Indexes for current database by Index Advantage  (Query 48) (Missing Indexes)
SELECT DISTINCT CONVERT(decimal(18,2), user_seeks * avg_total_user_cost * (avg_user_impact * 0.01)) AS [index_advantage], 
migs.last_user_seek, mid.[statement] AS [Database.Schema.Table],
mid.equality_columns, mid.inequality_columns, mid.included_columns,
migs.unique_compiles, migs.user_seeks, migs.avg_total_user_cost, migs.avg_user_impact,
OBJECT_NAME(mid.[object_id]) AS [Table Name], p.rows AS [Table Rows]
FROM sys.dm_db_missing_index_group_stats AS migs WITH (NOLOCK)
INNER JOIN sys.dm_db_missing_index_groups AS mig WITH (NOLOCK)
ON migs.group_handle = mig.index_group_handle
INNER JOIN sys.dm_db_missing_index_details AS mid WITH (NOLOCK)
ON mig.index_handle = mid.index_handle
INNER JOIN sys.partitions AS p WITH (NOLOCK)
ON p.[object_id] = mid.[object_id]
WHERE mid.database_id = DB_ID()
AND p.index_id < 2 
ORDER BY index_advantage DESC OPTION (RECOMPILE);
------

-- Look at index advantage, last user seek time, number of user seeks to help determine source and importance
-- SQL Server is overly eager to add included columns, so beware
-- Do not just blindly add indexes that show up from this query!!!


-- Find missing index warnings for cached plans in the current database  (Query 49) (Missing Index Warnings)
-- Note: This query could take some time on a busy instance
SELECT TOP(25) OBJECT_NAME(objectid) AS [ObjectName], 
               query_plan, cp.objtype, cp.usecounts
FROM sys.dm_exec_cached_plans AS cp WITH (NOLOCK)
CROSS APPLY sys.dm_exec_query_plan(cp.plan_handle) AS qp
WHERE CAST(query_plan AS NVARCHAR(MAX)) LIKE N'%MissingIndex%'
AND dbid = DB_ID()
ORDER BY cp.usecounts DESC OPTION (RECOMPILE);
------

-- Helps you connect missing indexes to specific stored procedures
-- This can help you decide whether to add them or not


-- Breaks down buffers used by current database by object (table, index) in the buffer cache  (Query 50) (Buffer Usage)
-- Note: This query could take some time on a busy instance
SELECT OBJECT_NAME(p.[object_id]) AS [Object Name], p.index_id, 
CAST(COUNT(*)/128.0 AS DECIMAL(10, 2)) AS [Buffer size(MB)],  
COUNT(*) AS [BufferCount], p.Rows AS [Row Count],
p.data_compression_desc AS [Compression Type]
FROM sys.allocation_units AS a WITH (NOLOCK)
INNER JOIN sys.dm_os_buffer_descriptors AS b WITH (NOLOCK)
ON a.allocation_unit_id = b.allocation_unit_id
INNER JOIN sys.partitions AS p WITH (NOLOCK)
ON a.container_id = p.hobt_id
WHERE b.database_id = CONVERT(int,DB_ID())
AND p.[object_id] > 100
GROUP BY p.[object_id], p.index_id, p.data_compression_desc, p.[Rows]
ORDER BY [BufferCount] DESC OPTION (RECOMPILE);
------

-- Tells you what tables and indexes are using the most memory in the buffer cache
-- It can help identify possible candidates for data compression


-- Get Table names, row counts, and compression status for clustered index or heap  (Query 51) (Table Sizes)
SELECT OBJECT_NAME(object_id) AS [ObjectName], 
SUM(Rows) AS [RowCount], data_compression_desc AS [CompressionType]
FROM sys.partitions WITH (NOLOCK)
WHERE index_id < 2 --ignore the partitions from the non-clustered index if any
AND OBJECT_NAME(object_id) NOT LIKE N'sys%'
AND OBJECT_NAME(object_id) NOT LIKE N'queue_%' 
AND OBJECT_NAME(object_id) NOT LIKE N'filestream_tombstone%' 
AND OBJECT_NAME(object_id) NOT LIKE N'fulltext%'
AND OBJECT_NAME(object_id) NOT LIKE N'ifts_comp_fragment%'
AND OBJECT_NAME(object_id) NOT LIKE N'xml_index_nodes%'
GROUP BY object_id, data_compression_desc
ORDER BY SUM(Rows) DESC OPTION (RECOMPILE);
------

-- Gives you an idea of table sizes, and possible data compression opportunities


-- Get some key table properties (Query 52) (Table Properties)
SELECT [name], create_date, lock_on_bulk_load, is_replicated, has_replication_filter, 
       is_tracked_by_cdc, lock_escalation_desc
FROM sys.tables WITH (NOLOCK) 
ORDER BY [name] OPTION (RECOMPILE);
------

-- Gives you some good information about your tables


-- Detect blocking (run multiple times)  (Query 53) (Detect Blocking)
SELECT t1.resource_type AS [lock type], DB_NAME(resource_database_id) AS [database],
t1.resource_associated_entity_id AS [blk object],t1.request_mode AS [lock req],  --- lock requested
t1.request_session_id AS [waiter sid], t2.wait_duration_ms AS [wait time],       -- spid of waiter  
(SELECT [text] FROM sys.dm_exec_requests AS r WITH (NOLOCK)                      -- get sql for waiter
CROSS APPLY sys.dm_exec_sql_text(r.[sql_handle]) 
WHERE r.session_id = t1.request_session_id) AS [waiter_batch],
(SELECT SUBSTRING(qt.[text],r.statement_start_offset/2, 
    (CASE WHEN r.statement_end_offset = -1 
    THEN LEN(CONVERT(nvarchar(max), qt.[text])) * 2 
    ELSE r.statement_end_offset END - r.statement_start_offset)/2) 
FROM sys.dm_exec_requests AS r WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(r.[sql_handle]) AS qt
WHERE r.session_id = t1.request_session_id) AS [waiter_stmt],					-- statement blocked
t2.blocking_session_id AS [blocker sid],										-- spid of blocker
(SELECT [text] FROM sys.sysprocesses AS p										-- get sql for blocker
CROSS APPLY sys.dm_exec_sql_text(p.[sql_handle]) 
WHERE p.spid = t2.blocking_session_id) AS [blocker_stmt]
FROM sys.dm_tran_locks AS t1 WITH (NOLOCK)
INNER JOIN sys.dm_os_waiting_tasks AS t2 WITH (NOLOCK)
ON t1.lock_owner_address = t2.resource_address OPTION (RECOMPILE);
------

-- Helps troubleshoot blocking and deadlocking issues
-- The results will change from second to second on a busy system
-- You should run this query multiple times when you see signs of blocking



-- When were Statistics last updated on all indexes?  (Query 54) (Statistics Update)
SELECT SCHEMA_NAME(o.Schema_ID) + N'.' + o.NAME AS [Object Name], o.type_desc AS [Object Type],
      i.name AS [Index Name], STATS_DATE(i.[object_id], i.index_id) AS [Statistics Date], 
      s.auto_created, s.no_recompute, s.user_created, st.row_count, st.used_page_count
FROM sys.objects AS o WITH (NOLOCK)
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON o.[object_id] = i.[object_id]
INNER JOIN sys.stats AS s WITH (NOLOCK)
ON i.[object_id] = s.[object_id] 
AND i.index_id = s.stats_id
INNER JOIN sys.dm_db_partition_stats AS st WITH (NOLOCK)
ON o.[object_id] = st.[object_id]
AND i.[index_id] = st.[index_id]
WHERE o.[type] IN ('U', 'V')
AND st.row_count > 0
ORDER BY STATS_DATE(i.[object_id], i.index_id) DESC OPTION (RECOMPILE); 
------ 

-- Helps discover possible problems with out-of-date statistics
-- Also gives you an idea which indexes are the most active


-- Get fragmentation info for all indexes above a certain size in the current database  (Query 55) (Index Fragmentation)
-- Note: This query could take some time on a very large database
SELECT DB_NAME(ps.database_id) AS [Database Name], OBJECT_NAME(ps.OBJECT_ID) AS [Object Name], 
i.name AS [Index Name], ps.index_id, ps.index_type_desc, ps.avg_fragmentation_in_percent, 
ps.fragment_count, ps.page_count, i.fill_factor, i.has_filter, i.filter_definition
FROM sys.dm_db_index_physical_stats(DB_ID(),NULL, NULL, NULL , N'LIMITED') AS ps
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON ps.[object_id] = i.[object_id] 
AND ps.index_id = i.index_id
WHERE ps.database_id = DB_ID()
AND ps.page_count > 2500
ORDER BY ps.avg_fragmentation_in_percent DESC OPTION (RECOMPILE);
------

-- Helps determine whether you have framentation in your relational indexes
-- and how effective your index maintenance strategy is


--- Index Read/Write stats (all tables in current DB) ordered by Reads  (Query 56) (Overall Index Usage - Reads)
SELECT OBJECT_NAME(s.[object_id]) AS [ObjectName], i.name AS [IndexName], i.index_id,
	   user_seeks + user_scans + user_lookups AS [Reads], s.user_updates AS [Writes],  
	   i.type_desc AS [IndexType], i.fill_factor AS [FillFactor], i.has_filter, i.filter_definition, 
	   s.last_user_scan, s.last_user_lookup, s.last_user_seek
FROM sys.dm_db_index_usage_stats AS s WITH (NOLOCK)
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON s.[object_id] = i.[object_id]
WHERE OBJECTPROPERTY(s.[object_id],'IsUserTable') = 1
AND i.index_id = s.index_id
AND s.database_id = DB_ID()
ORDER BY user_seeks + user_scans + user_lookups DESC OPTION (RECOMPILE); -- Order by reads
------


-- Show which indexes in the current database are most active for Reads


--- Index Read/Write stats (all tables in current DB) ordered by Writes  (Query 57) (Overall Index Usage - Writes)
SELECT OBJECT_NAME(s.[object_id]) AS [ObjectName], i.name AS [IndexName], i.index_id,
	   s.user_updates AS [Writes], user_seeks + user_scans + user_lookups AS [Reads], 
	   i.type_desc AS [IndexType], i.fill_factor AS [FillFactor], i.has_filter, i.filter_definition,
	   s.last_system_update, s.last_user_update
FROM sys.dm_db_index_usage_stats AS s WITH (NOLOCK)
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON s.[object_id] = i.[object_id]
WHERE OBJECTPROPERTY(s.[object_id],'IsUserTable') = 1
AND i.index_id = s.index_id
AND s.database_id = DB_ID()
ORDER BY s.user_updates DESC OPTION (RECOMPILE);						 -- Order by writes
------

-- Show which indexes in the current database are most active for Writes


-- Get lock waits for current database (Query 58) (Lock Waits)
SELECT o.name AS [table_name], i.name AS [index_name], ios.index_id, ios.partition_number,
		SUM(ios.row_lock_wait_count) AS [total_row_lock_waits], 
		SUM(ios.row_lock_wait_in_ms) AS [total_row_lock_wait_in_ms],
		SUM(ios.page_lock_wait_count) AS [total_page_lock_waits],
		SUM(ios.page_lock_wait_in_ms) AS [total_page_lock_wait_in_ms],
		SUM(ios.page_lock_wait_in_ms)+ SUM(row_lock_wait_in_ms) AS [total_lock_wait_in_ms]
FROM sys.dm_db_index_operational_stats(DB_ID(), NULL, NULL, NULL) AS ios
INNER JOIN sys.objects AS o WITH (NOLOCK)
ON ios.[object_id] = o.[object_id]
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON ios.[object_id] = i.[object_id] 
AND ios.index_id = i.index_id
WHERE o.[object_id] > 100
GROUP BY o.name, i.name, ios.index_id, ios.partition_number
HAVING SUM(ios.page_lock_wait_in_ms)+ SUM(row_lock_wait_in_ms) > 0
ORDER BY total_lock_wait_in_ms DESC OPTION (RECOMPILE);
------

-- This query is helpful for troubleshooting blocking and deadlocking issues


-- Look at recent Full backups for the current database (Query 59) (Recent Full Backups)
SELECT TOP (30) bs.machine_name, bs.server_name, bs.database_name AS [Database Name], bs.recovery_model,
CONVERT (BIGINT, bs.backup_size / 1048576 ) AS [Uncompressed Backup Size (MB)],
CONVERT (BIGINT, bs.compressed_backup_size / 1048576 ) AS [Compressed Backup Size (MB)],
CONVERT (NUMERIC (20,2), (CONVERT (FLOAT, bs.backup_size) /
CONVERT (FLOAT, bs.compressed_backup_size))) AS [Compression Ratio], bs.has_backup_checksums, bs.is_copy_only,
DATEDIFF (SECOND, bs.backup_start_date, bs.backup_finish_date) AS [Backup Elapsed Time (sec)],
bs.backup_finish_date AS [Backup Finish Date], bmf.physical_device_name AS [Backup Location], bmf.physical_block_size
FROM msdb.dbo.backupset AS bs WITH (NOLOCK)
INNER JOIN msdb.dbo.backupmediafamily AS bmf WITH (NOLOCK)
ON bs.media_set_id = bmf.media_set_id  
WHERE DATEDIFF (SECOND, bs.backup_start_date, bs.backup_finish_date) > 0 
AND bs.backup_size > 0
AND bs.type = 'D' -- Change to L if you want Log backups
AND database_name = DB_NAME(DB_ID())
ORDER BY bs.backup_finish_date DESC OPTION (RECOMPILE);
------

-- Are your backup sizes and times changing over time?
-- Are you using backup compression?
-- Are you using backup checksums?
-- Are you doing copy_only backups?
-- Have you done any backup tuning with striped backups, or changing the parameters of the backup command?


-- These three Pluralsight Courses go into more detail about how to run these queries and interpret the results

-- SQL Server 2014 DMV Diagnostic Queries � Part 1 
-- https://bit.ly/2plxCer

-- SQL Server 2014 DMV Diagnostic Queries � Part 2
-- https://bit.ly/2IuJpzI

-- SQL Server 2014 DMV Diagnostic Queries � Part 3
-- https://bit.ly/2FIlCPb



-- Sign up for Microsoft Visual Studio Dev Essentials and get a free three month pass to Pluralsight

-- Microsoft Visual Studio Dev Essentials
-- http://bit.ly/1q6xbDL


-- Sign up for Microsoft Azure Essentials and get lots of free Azure usage credits, MCP exam voucher, three month Pluralsight subscription

-- Microsoft Azure Essentials
-- https://bit.ly/2JMWe8x


-- August 2017 blog series about upgrading and migrating SQL Server
-- https://bit.ly/2ftKVrX

tools\dbatools\bin\smo\Microsoft.SqlServer.Management.RegisteredServers.dll

md5: 33E01BE5E65E6FAC06C95FFACE39EB51 | sha1: 74579D7B03125B349720772C1A97A4E00CAB1133 | sha256: ACB9E19B6A6CBC1B5CEE821A375ED4587D5C9D4AE5AA2DFA4F5CD62EBEF62749 | sha512: BFC124CFEAFDB4C197D7A2575252C318B48D29B6F0366AD482F296D8CE566DDC6F15C989D8932478E2969B500EEE21F737B806B7BA6A86DFE5A21DC14BBAC568

tools\dbatools\bin\smo\Microsoft.SqlServer.Management.Sdk.Scripting.dll

md5: D3D12A68A3322D2B4BCABFDEC2A06720 | sha1: 5CF6A8AD74A678BBB90094953FD541C326B9B230 | sha256: F422258ADF43DE7C6E6EB8EEB55B3AB11E1E9F996CBE8A39E853E6E2241892CB | sha512: 847B4595930C96583A5883CE96330280B2B08176E58BDB2D36AABF321D5BC3A9031811A5EABCD1CCEDAEF2E2AF2209F5C0800F71F0DEB614F5DB576C59C1641E

tools\dbatools\bin\smo\Microsoft.SqlServer.Management.Sdk.Sfc.dll

md5: A5D4E993C5F6C782AC33B49B68F1E27E | sha1: 5BD5CB47AFFFFD7E020D82189306BCB0FEC9A413 | sha256: 331194FC3A6A66982B6F775BBECF5199F7B8C5356A920BD44231160C63E02245 | sha512: 2CEC8182F0EAD3B73BB822FE9044AB8E2450159F7492577927830B11674A33AEDD8E454E0559E4694F3BAEF47EBF8320AC829F0A426338DB13FAD831F137F863

tools\dbatools\bin\smo\Microsoft.SqlServer.Management.SDK.SqlStudio.dll

md5: 8EFB3CDBE1DE83CE0670C649B766A76D | sha1: 63743941BE3158C423CC678891B8AF57E6071008 | sha256: CDCC8AD5C0F3C20BE315FBC3C766A531C9BECC89AED80F92A16DC062ECA632F5 | sha512: B226AAE407AC080E8EF23C0D9125E4710B0BE878D0CB33C0D3D90CF11290ACA9CD816BC4DB626D4ABA2F667EC962FAD4903D637FC99DF7BD29C912025FA70F88

tools\dbatools\bin\smo\Microsoft.SqlServer.Management.SmartAdminPolicies.dll

md5: 312A91796D44B1F2CE8D9D88BDD1B4E1 | sha1: C73C8477632C3547B38815A6C5A7141AF1902110 | sha256: 3C8DAA322542A081275EAF47FAF397A0E8D7B2E16FB4CF9BCED4A95C3F7D5A57 | sha512: 047C51512653A437C1B0176E1CF62975BC76783A584B2A3BC3EBC849C443C0A5624AAE6E259F44064EEFCFFBD1B842C759B45072F5312A2AF82FA5485759AAC4

tools\dbatools\bin\smo\Microsoft.SqlServer.Management.Utility.dll

md5: E2F350C2D2E5F7BCCB538FC002B1D42B | sha1: B18679210D8A2539A813C2A742C61C8970214D29 | sha256: DA19A0C3E5E3759D49E9BEF4F9B6AFAC6933DCF033F5A2A7D5ABF7B056FB90D2 | sha512: 2EAAB9572048A25D20B9D8EB707EC302C795692D807FE4DF90DBE2DAA3C708B7BAEAAD536C0D426AA10D7C4BE29BE139193690A761008DD850740ECBB21E7B66

tools\dbatools\bin\smo\Microsoft.SqlServer.Management.UtilityEnum.dll

md5: 808537ADDDBC7F9D7CB7C0C590DF692C | sha1: A59A90B4A2EB2106BCAD60E8FD2262F83794E018 | sha256: 81EF6AB722C276E6E022BAF21C1E83E879D56592BB6319AB25FEAF90D798EA62 | sha512: 070F15885253EEFAF0832BFA2502900B292FB31DE10432EECF30E23444232DD8FC9E06036ACB46BAB808FE5D663DE19105F5D01E9EBBE319C417209ACD0F8814

tools\dbatools\bin\smo\Microsoft.SqlServer.Management.XEvent.dll

md5: 277A3D4FB1362CCD4A33C7D4FF4A9EA4 | sha1: FFF47A49D5EA68C2B42663F85C07FFDF54D91807 | sha256: 74DCAF578AF7E821F8D7A278A551F4DC354C0B5929679A9CF9E849DE8CEA3EC0 | sha512: C8C75EB4C3ECFFE1B43FE6B1E7312077AD73938946E676A336160CAA427C6EBDC091F7910A41F17C7105280AC05F52E58927DEC71ED79117E8214067F50A5441

tools\dbatools\bin\smo\Microsoft.SqlServer.Management.XEventDbScoped.dll

md5: 08BD89DB5649CFB1873974BEBF95F218 | sha1: 32AE7370218C0123F80679FA38E5A94B0F87D531 | sha256: 3934CC842ECAAF05B0F7EE5F39540688BC04ED0F43F188B6F5CB127B0136CD18 | sha512: F7BA41D2B997B3447E0DEFA758C4EF93045E1491D7C9F5C013897256178EE4F62386F78E2FB80E63E7B36D2A25FFB2C4FA84CCE088915CD4571E5901B6C9A301

tools\dbatools\bin\diagnosticquery\SQLServerDiagnosticQueries_2008R2_201810.sql


-- SQL Server 2008 R2 Diagnostic Information Queries
-- Glenn Berry 
-- Last Modified: November 11, 2018
-- https://www.sqlserverperformance.wordpress.com/
-- https://www.sqlskills.com/blogs/glenn/
-- Twitter: GlennAlanBerry

-- Please listen to my Pluralsight courses
-- https://www.pluralsight.com/author/glenn-berry

-- If you want to find all of our SQLskills SQL101 blog posts, check out https://www.sqlskills.com/help/sql101/

-- Many of these queries will not work if you have databases in 80 compatibility mode
-- Please make sure you are using the correct version of these diagnostic queries for your version of SQL Server

--******************************************************************************
--*   Copyright (C) 2018 Glenn Berry, SQLskills.com
--*   All rights reserved. 
--*
--*   For more scripts and sample code, check out 
--*      https://www.sqlskills.com/blogs/glenn
--*
--*   You may alter this code for your own *non-commercial* purposes. You may
--*   republish altered code as long as you include this copyright and give due credit. 
--*
--*
--*   THIS CODE AND INFORMATION ARE PROVIDED "AS IS" WITHOUT WARRANTY OF 
--*   ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED 
--*   TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A
--*   PARTICULAR PURPOSE. 
--*
--******************************************************************************

-- Note: A number of these queries will only work on SQL Server 2008 R2 SP1 or later
-- They are all noted in the instructions

-- Check the major product version to see if it is SQL Server 2008 R2
IF NOT EXISTS (SELECT * WHERE CONVERT(varchar(128), SERVERPROPERTY('ProductVersion')) LIKE '10.5%')
	BEGIN
		DECLARE @ProductVersion varchar(128) = CONVERT(varchar(128), SERVERPROPERTY('ProductVersion'));
		RAISERROR ('Script does not match the ProductVersion [%s] of this instance. Many of these queries may not work on this version.' , 18 , 16 , @ProductVersion);
	END
	ELSE
		PRINT N'You have the correct major version of SQL Server for this diagnostic information script';


-- Instance level queries *******************************

-- SQL and OS Version information for current instance  (Query 1) (Version Info)
SELECT SERVERPROPERTY ('MachineName') AS [Server Name], @@VERSION AS [SQL Server and OS Version Info];
------


-- SQL Server 2008 R2 Builds				SQL Server 2008 R2 SP1 Builds			SQL Server 2008 R2 SP2 Builds							SQL Server 2008 R2 SP3 Builds
-- Build			Description				Build		Description					Build		Description									Build		Description
-- 10.50.1092		August 2009 CTP2		
-- 10.50.1352		November 2009 CTP3
-- 10.50.1450		Release Candidate
-- 10.50.1600		RTM
-- 10.50.1702		RTM CU1
-- 10.50.1720		RTM CU2
-- 10.50.1734		RTM CU3
-- 10.50.1746		RTM CU4
-- 10.50.1753		RTM CU5
-- 10.50.1765		RTM CU6	 --->			10.50.2500	SP1 RTM
-- 10.50.1777		RTM CU7
-- 10.50.1797		RTM CU8	 --->			10.50.2769  SP1 CU1
-- 10.50.1804       RTM CU9  --->			10.50.2772  SP1 CU2
-- 10.50.1807		RTM CU10 --->           10.50.2789  SP1 CU3
-- 10.50.1809       RTM CU11 --->			10.50.2796  SP1 CU4 
-- 10.50.1810		RTM CU12 --->			10.50.2806	SP1 CU5		--->			10.50.4000	SP2 RTM
-- 10.50.1815		RTM CU13 --->           10.50.2811  SP1 CU6
-- 10.50.1817		RTM CU14 --->			10.50.2817  SP1 CU7		--->			10.50.4260	SP2 CU1			         7/24/2012
-- RTM Branch Retired        --->			10.50.2822  SP1 CU8     --->			10.50.4263  SP2 CU2                  8/31/2012   
--											10.50.2866  SP1 CU9     --->			10.50.4266  SP2 CU3					10/15/2012
--                                          10.50.2868  SP1 CU10    --->			10.50.4270  SP2 CU4					12/17/2012
--                                          10.50.2869  SP1 CU11    --->            10.50.4276  SP2 CU5				     2/18/2013
--                                          10.50.2874  SP1 CU12    --->            10.50.4279  SP2 CU6                  4/15/2013
--                                          10.50.2876  SP1 CU13    --->            10.50.4286  SP2 CU7					 6/17/2013
--                                          10.50.2881  SP1 CU14    --->            10.50.4290  SP2 CU8                  8/22/2013
--                                                                                  10.50.4295  SP2 CU9                 10/28/2013  
--                                                                                  10.50.4297  SP2 CU10                12/16/2013 
--                                                                                  10.50.4302  SP2 CU11                 2/17/2014
--                                                                                  10.50.4305	SP2 CU12                 4/21/2014
--                                                                                  10.50.4319  SP2 CU13                 6/30/2014   
--																																			10.50.6000	SP3 RTM		9/26/2014
--                                                                                                                                          10.50.6525  SP3 + HF     2/9/2015      http://support.microsoft.com/kb/3033860
-- Security Update for SQL Server 2008 R2 SP3 (KB4057113) https://www.microsoft.com/en-us/download/details.aspx?id=56415					10.50.6560	SP3 + HF	 1/5/2018	   Hot fix for Spectre/Meltdown


-- SQL Server 2008 R2 SP3 RTM plus an on-demand hotfix (Build 10.50.6525) is the final public build of SQL Server 2008 R2, barring any later security fixes.          

-- SQL Server 2008 R2 RTM was considered an "unsupported service pack" as of July 12, 2012
-- SQL Server 2008 R2 SP1 was considered an "unsupported service pack" as of August 8, 2013										

-- The SQL Server 2008 R2 builds that were released after SQL Server 2008 R2 was released
-- http://support.microsoft.com/kb/981356

-- The SQL Server 2008 R2 builds that were released after SQL Server 2008 R2 Service Pack 1 was released 
-- http://support.microsoft.com/kb/2567616

-- The SQL Server 2008 R2 builds that were released after SQL Server 2008 R2 Service Pack 2 was released
-- http://support.microsoft.com/kb/2730301 

-- SQL Server 2008 R2 SP2 CU13 is the final cumulative update for SQL Server 2008 R2 SP2

-- SQL Server 2008 R2 SP3 Release information
-- http://support2.microsoft.com/kb/2979597

-- Download SQL Server Management Studio (SSMS)
-- https://msdn.microsoft.com/en-us/library/mt238290.aspx



-- When was SQL Server installed  (Query 2) (SQL Server Install Date) 
SELECT @@SERVERNAME AS [Server Name], create_date AS [SQL Server Install Date] 
FROM sys.server_principals WITH (NOLOCK)
WHERE name = N'NT AUTHORITY\SYSTEM'
OR name = N'NT AUTHORITY\NETWORK SERVICE' OPTION (RECOMPILE);
------

-- Tells you the date and time that SQL Server was installed
-- It is a good idea to know how old your instance is


-- Get selected server properties (Query 3) (Server Properties)
SELECT SERVERPROPERTY('MachineName') AS [MachineName], SERVERPROPERTY('ServerName') AS [ServerName],  
SERVERPROPERTY('InstanceName') AS [Instance], SERVERPROPERTY('IsClustered') AS [IsClustered], 
SERVERPROPERTY('ComputerNamePhysicalNetBIOS') AS [ComputerNamePhysicalNetBIOS], 
SERVERPROPERTY('Edition') AS [Edition], SERVERPROPERTY('ProductLevel') AS [ProductLevel], 
SERVERPROPERTY('ProductVersion') AS [ProductVersion], SERVERPROPERTY('ProcessID') AS [ProcessID],
SERVERPROPERTY('Collation') AS [Collation], SERVERPROPERTY('IsFullTextInstalled') AS [IsFullTextInstalled], 
SERVERPROPERTY('IsIntegratedSecurityOnly') AS [IsIntegratedSecurityOnly];
------

-- This gives you a lot of useful information about your instance of SQL Server,
-- such as the ProcessID for SQL Server and your collation


-- Get SQL Server Agent jobs and Category information (Query 4) (SQL Server Agent Jobs)
SELECT sj.name AS [Job Name], sj.[description] AS [Job Description], SUSER_SNAME(sj.owner_sid) AS [Job Owner],
sj.date_created AS [Date Created], sj.[enabled] AS [Job Enabled], 
sj.notify_email_operator_id, sj.notify_level_email, sc.name AS [CategoryName],
s.[enabled] AS [Sched Enabled], js.next_run_date, js.next_run_time
FROM msdb.dbo.sysjobs AS sj WITH (NOLOCK)
INNER JOIN msdb.dbo.syscategories AS sc WITH (NOLOCK)
ON sj.category_id = sc.category_id
LEFT OUTER JOIN msdb.dbo.sysjobschedules AS js WITH (NOLOCK)
ON sj.job_id = js.job_id
LEFT OUTER JOIN msdb.dbo.sysschedules AS s WITH (NOLOCK)
ON js.schedule_id = s.schedule_id
ORDER BY sj.name OPTION (RECOMPILE);
------

-- Gives you some basic information about your SQL Server Agent jobs, who owns them and how they are configured
-- Look for Agent jobs that are not owned by sa
-- Look for jobs that have a notify_email_operator_id set to 0 (meaning no operator)
-- Look for jobs that have a notify_level_email set to 0 (meaning no e-mail is ever sent)
--
-- MSDN sysjobs documentation
-- http://msdn.microsoft.com/en-us/library/ms189817.aspx


-- Get SQL Server Agent Alert Information (Query 5) (SQL Server Agent Alerts)
SELECT name, event_source, message_id, severity, [enabled], has_notification, 
       delay_between_responses, occurrence_count, last_occurrence_date, last_occurrence_time
FROM msdb.dbo.sysalerts WITH (NOLOCK)
ORDER BY name OPTION (RECOMPILE);
------

-- Gives you some basic information about your SQL Server Agent Alerts (which are different from SQL Server Agent jobs)
-- Read more about Agent Alerts here: https://www.sqlskills.com/blogs/glenn/creating-sql-server-agent-alerts-for-critical-errors/


-- Returns a list of all global trace flags that are enabled (Query 6) (Global Trace Flags)
DBCC TRACESTATUS (-1);
------

-- If no global trace flags are enabled, no results will be returned.
-- It is very useful to know what global trace flags are currently enabled as part of the diagnostic process.

-- Common trace flags that should be enabled in most cases
-- TF 1117 - When growing a data file, grow all files at the same time so they remain the same size, reducing allocation contention points
--           http://support2.microsoft.com/kb/2154845
-- 
-- TF 1118 - Helps alleviate allocation contention in tempdb, SQL Server allocates full extents to each database object, 
--           thereby eliminating the contention on SGAM pages (more important with older versions of SQL Server)
--           Recommendations to reduce allocation contention in SQL Server tempdb database
--           http://support2.microsoft.com/kb/2154845

-- TF 2371 - Lowers auto update statistics threshold for large tables
--           http://blogs.msdn.com/b/saponsqlserver/archive/2011/09/07/changes-to-automatic-update-statistics-in-sql-server-traceflag-2371.aspx

-- TF 3226 - Supresses logging of successful database backup messages to the SQL Server Error Log
--           https://www.sqlskills.com/blogs/paul/fed-up-with-backup-success-messages-bloating-your-error-logs/


-- Windows information (SQL Server 2008 R2 SP1 or greater)  (Query 7) (Windows Info)
SELECT windows_release, windows_service_pack_level, 
       windows_sku, os_language_version
FROM sys.dm_os_windows_info WITH (NOLOCK) OPTION (RECOMPILE);
------

-- Gives you major OS version, Service Pack, Edition, and language info for the operating system 
-- 6.3 is either Windows 8.1 or Windows Server 2012 R2
-- 6.2 is either Windows 8 or Windows Server 2012
-- 6.1 is either Windows 7 or Windows Server 2008 R2
-- 6.0 is either Windows Vista or Windows Server 2008
-- 5.2 is either Windows XP or Windows Server 2003

-- Windows SKU codes
-- 4 is Enterprise Edition
-- 7 is Standard Server Edition
-- 8 is Datacenter Server Edition
-- 10 is Enterprise Server Edition
-- 48 is Professional Edition

-- 1033 for os_language_version is US-English

-- Hardware and Software Requirements for Installing SQL Server 2008 R2
-- http://msdn.microsoft.com/en-us/library/ms143506(v=sql.105).aspx

-- Using SQL Server in Windows 8, Windows 8.1, Windows Server 2012 and Windows Server 2012 R2 environments
-- http://support.microsoft.com/kb/2681562


-- SQL Server Services information (SQL Server 2008 R2 SP1 or greater)  (Query 8) (SQL Server Services Info)
SELECT servicename, process_id, startup_type_desc, status_desc, 
last_startup_time, service_account, is_clustered, cluster_nodename, [filename]
FROM sys.dm_server_services WITH (NOLOCK) OPTION (RECOMPILE);
------

-- Tells you the account being used for the SQL Server Service and the SQL Agent Service
-- Shows the processid, when they were last started, and their current status
-- Shows whether you are running on a failover cluster instance


-- SQL Server NUMA Node information  (Query 9) (SQL Server NUMA Info)
SELECT node_id, node_state_desc, memory_node_id, processor_group, online_scheduler_count, 
       active_worker_count, avg_load_balance, resource_monitor_state
FROM sys.dm_os_nodes WITH (NOLOCK) 
WHERE node_state_desc <> N'ONLINE DAC' OPTION (RECOMPILE);
------

-- Gives you some useful information about the composition 
-- and relative load on your NUMA nodes


-- Hardware information from SQL Server 2008 R2  (Query 10) (Hardware Info)
-- (Cannot distinguish between HT and multi-core)
SELECT cpu_count AS [Logical CPU Count], hyperthread_ratio AS [Hyperthread Ratio],
cpu_count/hyperthread_ratio AS [Physical CPU Count], 
physical_memory_in_bytes/1048576 AS [Physical Memory (MB)], 
sqlserver_start_time,
DATEDIFF(hour, sqlserver_start_time, GETDATE()) AS [SQL Server Up Time (hrs)],
affinity_type_desc 
FROM sys.dm_os_sys_info WITH (NOLOCK) OPTION (RECOMPILE);
------

-- Gives you some good basic hardware information about your database server


-- Get System Manufacturer and model number from  (Query 11) (System Manufacturer)
-- SQL Server Error log. This query might take a few seconds 
-- if you have not recycled your error log recently
EXEC sys.xp_readerrorlog 0, 1, N'Manufacturer';
------ 

-- This can help you determine the capabilities
-- and capacities of your database server


-- Get processor description from Windows Registry  (Query 12) (Processor Description)
EXEC sys.xp_instance_regread N'HKEY_LOCAL_MACHINE', N'HARDWARE\DESCRIPTION\System\CentralProcessor\0', N'ProcessorNameString';
------

-- Gives you the model number and rated clock speed of your processor(s)
-- Your processors may be running at less than the rated clock speed due
-- to the Windows Power Plan or hardware power management

-- You can use CPU-Z to get your actual CPU core speed and a lot of other useful information
-- http://www.cpuid.com/softwares/cpu-z.html

-- You can learn more about processor selection for SQL Server by following this link
-- https://www.sqlskills.com/blogs/glenn/processor-selection-for-sql-server/



-- Get the current node name from your cluster nodes  (Query 13) (Cluster Node Properties)
-- (if your database server is in a failover cluster)
SELECT NodeName
FROM sys.dm_os_cluster_nodes WITH (NOLOCK) OPTION (RECOMPILE);
------

-- Knowing which node owns the cluster resources is critical
-- Especially when you are installing Windows or SQL Server updates
-- You will see no results if your instance is not clustered


-- Get configuration values for instance  (Query 14) (Configuration Values)
SELECT name, value, value_in_use, minimum, maximum, [description], is_dynamic, is_advanced
FROM sys.configurations WITH (NOLOCK)
ORDER BY name OPTION (RECOMPILE);
------

-- Focus on these settings:
-- backup compression default (should be 1 in most cases)
-- clr enabled (only enable if it is needed)
-- cost threshold for parallelism (depends on your workload)
-- lightweight pooling (should be zero)
-- max degree of parallelism (depends on your workload)
-- max server memory (MB) (set to an appropriate value, not the default)
-- optimize for ad hoc workloads (should be 1)
-- priority boost (should be zero)
-- remote admin connections (should be 1)




-- Get information on location, time and size of any memory dumps from SQL Server (SQL Server 2008 R2 SP1 or greater)  (Query 15) (Memory Dump Info)
SELECT [filename], creation_time, size_in_bytes/1048576.0 AS [Size (MB)]
FROM sys.dm_server_memory_dumps WITH (NOLOCK) 
ORDER BY creation_time DESC OPTION (RECOMPILE);
------

-- This will not return any rows if you have 
-- not had any memory dumps (which is a good thing)


-- File names and paths for all user and system databases on instance   (Query 16) (Database Filenames and Paths)
SELECT DB_NAME([database_id]) AS [Database Name], 
       [file_id], [name], physical_name, [type_desc], state_desc,
	   is_percent_growth, growth,
	   CONVERT(bigint, growth/128.0) AS [Growth in MB], 
       CONVERT(bigint, size/128.0) AS [Total Size in MB]
FROM sys.master_files WITH (NOLOCK)
ORDER BY DB_NAME([database_id]), [file_id] OPTION (RECOMPILE);
------

-- Things to look at:
-- Are data files and log files on different drives?
-- Is everything on the C: drive?
-- Is TempDB on dedicated drives?
-- Is there only one TempDB data file?
-- Are all of the TempDB data files the same size?
-- Are there multiple data files for user databases?
-- Is percent growth enabled for any files (which is bad)?


-- Volume info for all LUNS that have database files on the current instance (SQL Server 2008 R2 SP1 or greater)  (Query 17) (Volume Info)
SELECT DISTINCT vs.volume_mount_point, vs.file_system_type, 
vs.logical_volume_name, CONVERT(DECIMAL(18,2),vs.total_bytes/1073741824.0) AS [Total Size (GB)],
CONVERT(DECIMAL(18,2),vs.available_bytes/1073741824.0) AS [Available Size (GB)],  
CAST(CAST(vs.available_bytes AS FLOAT)/ CAST(vs.total_bytes AS FLOAT) AS DECIMAL(18,2)) * 100 AS [Space Free %] 
FROM sys.master_files AS f WITH (NOLOCK)
CROSS APPLY sys.dm_os_volume_stats(f.database_id, f.[file_id]) AS vs OPTION (RECOMPILE);
------

--Shows you the total and free space on the LUNs where you have database files


-- Look for I/O requests taking longer than 15 seconds in the five most recent SQL Server Error Logs (Query 18) (IO Warnings)
CREATE TABLE #IOWarningResults(LogDate datetime, ProcessInfo sysname, LogText nvarchar(1000));

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 0, 1, N'taking longer than 15 seconds';

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 1, 1, N'taking longer than 15 seconds';

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 2, 1, N'taking longer than 15 seconds';

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 3, 1, N'taking longer than 15 seconds';

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 4, 1, N'taking longer than 15 seconds';

SELECT LogDate, ProcessInfo, LogText
FROM #IOWarningResults
ORDER BY LogDate DESC;

DROP TABLE #IOWarningResults;
------  

-- Finding 15 second I/O warnings in the SQL Server Error Log is useful evidence of
-- poor I/O performance (which might have many different causes)
-- Look to see if you see any patterns in the results (same files, same drives, same time of day, etc.)

-- Diagnostics in SQL Server help detect stalled and stuck I/O operations
-- https://support.microsoft.com/en-us/kb/897284



-- Drive level latency information (Query 19) (Drive Level Latency)
-- Based on code from Jimmy May
SELECT tab.[Drive], tab.volume_mount_point AS [Volume Mount Point], 
	CASE 
		WHEN num_of_reads = 0 THEN 0 
		ELSE (io_stall_read_ms/num_of_reads) 
	END AS [Read Latency],
	CASE 
		WHEN num_of_writes = 0 THEN 0 
		ELSE (io_stall_write_ms/num_of_writes) 
	END AS [Write Latency],
	CASE 
		WHEN (num_of_reads = 0 AND num_of_writes = 0) THEN 0 
		ELSE (io_stall/(num_of_reads + num_of_writes)) 
	END AS [Overall Latency],
	CASE 
		WHEN num_of_reads = 0 THEN 0 
		ELSE (num_of_bytes_read/num_of_reads) 
	END AS [Avg Bytes/Read],
	CASE 
		WHEN num_of_writes = 0 THEN 0 
		ELSE (num_of_bytes_written/num_of_writes) 
	END AS [Avg Bytes/Write],
	CASE 
		WHEN (num_of_reads = 0 AND num_of_writes = 0) THEN 0 
		ELSE ((num_of_bytes_read + num_of_bytes_written)/(num_of_reads + num_of_writes)) 
	END AS [Avg Bytes/Transfer]
FROM (SELECT LEFT(UPPER(mf.physical_name), 2) AS Drive, SUM(num_of_reads) AS num_of_reads,
	         SUM(io_stall_read_ms) AS io_stall_read_ms, SUM(num_of_writes) AS num_of_writes,
	         SUM(io_stall_write_ms) AS io_stall_write_ms, SUM(num_of_bytes_read) AS num_of_bytes_read,
	         SUM(num_of_bytes_written) AS num_of_bytes_written, SUM(io_stall) AS io_stall, vs.volume_mount_point 
      FROM sys.dm_io_virtual_file_stats(NULL, NULL) AS vfs
      INNER JOIN sys.master_files AS mf WITH (NOLOCK)
      ON vfs.database_id = mf.database_id AND vfs.file_id = mf.file_id
	  CROSS APPLY sys.dm_os_volume_stats(mf.database_id, mf.[file_id]) AS vs 
      GROUP BY LEFT(UPPER(mf.physical_name), 2), vs.volume_mount_point) AS tab
ORDER BY [Overall Latency] OPTION (RECOMPILE);
------

-- Shows you the drive-level latency for reads and writes, in milliseconds
-- Latency above 20-25ms is usually a problem


-- Calculates average stalls per read, per write, and per total input/output for each database file  (Query 20) (IO Stalls by File)
SELECT DB_NAME(fs.database_id) AS [Database Name], CAST(fs.io_stall_read_ms/(1.0 + fs.num_of_reads) AS NUMERIC(10,1)) AS [avg_read_stall_ms],
CAST(fs.io_stall_write_ms/(1.0 + fs.num_of_writes) AS NUMERIC(10,1)) AS [avg_write_stall_ms],
CAST((fs.io_stall_read_ms + fs.io_stall_write_ms)/(1.0 + fs.num_of_reads + fs.num_of_writes) AS NUMERIC(10,1)) AS [avg_io_stall_ms],
CONVERT(DECIMAL(18,2), mf.size/128.0) AS [File Size (MB)], mf.physical_name, mf.type_desc, fs.io_stall_read_ms, fs.num_of_reads, 
fs.io_stall_write_ms, fs.num_of_writes, fs.io_stall_read_ms + fs.io_stall_write_ms AS [io_stalls], fs.num_of_reads + fs.num_of_writes AS [total_io]
FROM sys.dm_io_virtual_file_stats(null,null) AS fs
INNER JOIN sys.master_files AS mf WITH (NOLOCK)
ON fs.database_id = mf.database_id
AND fs.[file_id] = mf.[file_id]
ORDER BY avg_io_stall_ms DESC OPTION (RECOMPILE);
------

-- Helps determine which database files on the entire instance have the most I/O bottlenecks
-- This can help you decide whether certain LUNs are overloaded and whether you might
-- want to move some files to a different location or perhaps improve your I/O performance


-- Recovery model, log reuse wait description, log file size, log usage size  (Query 21) (Database Properties)
-- and compatibility level for all databases on instance
SELECT db.[name] AS [Database Name], db.recovery_model_desc AS [Recovery Model], 
db.log_reuse_wait_desc AS [Log Reuse Wait Description], 
ls.cntr_value AS [Log Size (KB)], lu.cntr_value AS [Log Used (KB)],
CAST(CAST(lu.cntr_value AS FLOAT) / CAST(ls.cntr_value AS FLOAT)AS DECIMAL(18,2)) * 100 AS [Log Used %], 
db.[compatibility_level] AS [DB Compatibility Level], 
db.page_verify_option_desc AS [Page Verify Option], db.is_auto_create_stats_on, db.is_auto_update_stats_on,
db.is_auto_update_stats_async_on, db.is_parameterization_forced, 
db.snapshot_isolation_state_desc, db.is_read_committed_snapshot_on,
db.is_auto_close_on, db.is_auto_shrink_on, db.is_cdc_enabled, db.is_published
FROM sys.databases AS db WITH (NOLOCK)
INNER JOIN sys.dm_os_performance_counters AS lu WITH (NOLOCK)
ON db.name = lu.instance_name
INNER JOIN sys.dm_os_performance_counters AS ls WITH (NOLOCK) 
ON db.name = ls.instance_name
WHERE lu.counter_name LIKE N'Log File(s) Used Size (KB)%' 
AND ls.counter_name LIKE N'Log File(s) Size (KB)%'
AND ls.cntr_value > 0
ORDER BY db.[name] OPTION (RECOMPILE);
------

-- Things to look at:
-- How many databases are on the instance?
-- What recovery models are they using?
-- What is the log reuse wait description?
-- How full are the transaction logs ?
-- What compatibility level are the databases on? 
-- What is the Page Verify Option? (should be CHECKSUM)
-- Is Auto Update Statistics Asynchronously enabled?
-- Make sure auto_shrink and auto_close are not enabled!



-- Missing Indexes for all databases by Index Advantage  (Query 22) (Missing Indexes All Databases)
SELECT CONVERT(decimal(18,2), user_seeks * avg_total_user_cost * (avg_user_impact * 0.01)) AS [index_advantage],  
migs.last_user_seek, mid.[statement] AS [Database.Schema.Table],
mid.equality_columns, mid.inequality_columns, mid.included_columns,
migs.unique_compiles, migs.user_seeks, migs.avg_total_user_cost, migs.avg_user_impact
FROM sys.dm_db_missing_index_group_stats AS migs WITH (NOLOCK)
INNER JOIN sys.dm_db_missing_index_groups AS mig WITH (NOLOCK)
ON migs.group_handle = mig.index_group_handle
INNER JOIN sys.dm_db_missing_index_details AS mid WITH (NOLOCK)
ON mig.index_handle = mid.index_handle
ORDER BY index_advantage DESC OPTION (RECOMPILE);
------

-- Getting missing index information for all of the databases on the instance is very useful
-- Look at last user seek time, number of user seeks to help determine source and importance
-- Also look at avg_user_impact and avg_total_user_cost to help determine importance
-- SQL Server is overly eager to add included columns, so beware
-- Do not just blindly add indexes that show up from this query!!!



-- Get VLF Counts for all databases on the instance (Query 23) (VLF Counts)
-- (adapted from Michelle Ufford) 
CREATE TABLE #VLFInfo (FileID  int,
					   FileSize bigint, StartOffset bigint,
					   FSeqNo      bigint, [Status]    bigint,
					   Parity      bigint, CreateLSN   numeric(38));
	 
CREATE TABLE #VLFCountResults(DatabaseName sysname, VLFCount int);
	 
EXEC sp_MSforeachdb N'Use [?]; 

				INSERT INTO #VLFInfo 
				EXEC sp_executesql N''DBCC LOGINFO([?])''; 
	 
				INSERT INTO #VLFCountResults 
				SELECT DB_NAME(), COUNT(*) 
				FROM #VLFInfo; 

				TRUNCATE TABLE #VLFInfo;'
	 
SELECT DatabaseName, VLFCount  
FROM #VLFCountResults
ORDER BY VLFCount DESC;
	 
DROP TABLE #VLFInfo;
DROP TABLE #VLFCountResults;
------

-- High VLF counts can affect write performance 
-- and they can make full database restores and crash recovery take much longer
-- Try to keep your VLF counts under 200 in most cases (depending on log file size)



-- Get CPU utilization by database (Query 24) (CPU Usage by Database)
WITH DB_CPU_Stats
AS
(SELECT pa.DatabaseID, DB_Name(pa.DatabaseID) AS [Database Name], SUM(qs.total_worker_time/1000) AS [CPU_Time_Ms]
 FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
 CROSS APPLY (SELECT CONVERT(int, value) AS [DatabaseID] 
              FROM sys.dm_exec_plan_attributes(qs.plan_handle)
              WHERE attribute = N'dbid') AS pa
 GROUP BY DatabaseID)
SELECT ROW_NUMBER() OVER(ORDER BY [CPU_Time_Ms] DESC) AS [CPU Rank],
       [Database Name], [CPU_Time_Ms] AS [CPU Time (ms)], 
       CAST([CPU_Time_Ms] * 1.0 / SUM([CPU_Time_Ms]) OVER() * 100.0 AS DECIMAL(5, 2)) AS [CPU Percent]
FROM DB_CPU_Stats
WHERE DatabaseID <> 32767 -- ResourceDB
ORDER BY [CPU Rank] OPTION (RECOMPILE);
------

-- Helps determine which database is using the most CPU resources on the instance


-- Get I/O utilization by database (Query 25) (IO Usage By Database)
WITH Aggregate_IO_Statistics
AS
(SELECT DB_NAME(database_id) AS [Database Name],
CAST(SUM(num_of_bytes_read + num_of_bytes_written)/1048576 AS DECIMAL(12, 2)) AS io_in_mb
FROM sys.dm_io_virtual_file_stats(NULL, NULL) AS [DM_IO_STATS]
GROUP BY database_id)
SELECT ROW_NUMBER() OVER(ORDER BY io_in_mb DESC) AS [I/O Rank], [Database Name], io_in_mb AS [Total I/O (MB)],
       CAST(io_in_mb/ SUM(io_in_mb) OVER() * 100.0 AS DECIMAL(5,2)) AS [I/O Percent]
FROM Aggregate_IO_Statistics
ORDER BY [I/O Rank] OPTION (RECOMPILE);
------

-- Helps determine which database is using the most I/O resources on the instance


-- Get total buffer usage by database for current instance  (Query 26) (Total Buffer Usage by Database)
-- This make take some time to run on a busy instance
WITH AggregateBufferPoolUsage
AS
(SELECT DB_NAME(database_id) AS [Database Name],
CAST(COUNT(*) * 8/1024.0 AS DECIMAL (10,2))  AS [CachedSize]
FROM sys.dm_os_buffer_descriptors WITH (NOLOCK)
WHERE database_id <> 32767 -- ResourceDB
GROUP BY DB_NAME(database_id))
SELECT ROW_NUMBER() OVER(ORDER BY CachedSize DESC) AS [Buffer Pool Rank], [Database Name], CachedSize AS [Cached Size (MB)],
       CAST(CachedSize / SUM(CachedSize) OVER() * 100.0 AS DECIMAL(5,2)) AS [Buffer Pool Percent]
FROM AggregateBufferPoolUsage
ORDER BY [Buffer Pool Rank] OPTION (RECOMPILE);
------

-- Tells you how much memory (in the buffer pool) 
-- is being used by each database on the instance


-- Clear Wait Stats with this command
-- DBCC SQLPERF('sys.dm_os_wait_stats', CLEAR);

-- Isolate top waits for server instance since last restart or wait statistics clear (Query 27) (Top Waits)
WITH [Waits] 
AS (SELECT wait_type, wait_time_ms/ 1000.0 AS [WaitS],
          (wait_time_ms - signal_wait_time_ms) / 1000.0 AS [ResourceS],
           signal_wait_time_ms / 1000.0 AS [SignalS],
           waiting_tasks_count AS [WaitCount],
           100.0 *  wait_time_ms / SUM (wait_time_ms) OVER() AS [Percentage],
           ROW_NUMBER() OVER(ORDER BY wait_time_ms DESC) AS [RowNum]
    FROM sys.dm_os_wait_stats WITH (NOLOCK)
    WHERE [wait_type] NOT IN (
        N'BROKER_EVENTHANDLER', N'BROKER_RECEIVE_WAITFOR', N'BROKER_TASK_STOP',
		N'BROKER_TO_FLUSH', N'BROKER_TRANSMITTER', N'CHECKPOINT_QUEUE',
        N'CHKPT', N'CLR_AUTO_EVENT', N'CLR_MANUAL_EVENT', N'CLR_SEMAPHORE',
        N'DBMIRROR_DBM_EVENT', N'DBMIRROR_EVENTS_QUEUE', N'DBMIRROR_WORKER_QUEUE',
		N'DBMIRRORING_CMD', N'DIRTY_PAGE_POLL', N'DISPATCHER_QUEUE_SEMAPHORE',
        N'EXECSYNC', N'FSAGENT', N'FT_IFTS_SCHEDULER_IDLE_WAIT', N'FT_IFTSHC_MUTEX',
        N'HADR_CLUSAPI_CALL', N'HADR_FILESTREAM_IOMGR_IOCOMPLETION', N'HADR_LOGCAPTURE_WAIT', 
		N'HADR_NOTIFICATION_DEQUEUE', N'HADR_TIMER_TASK', N'HADR_WORK_QUEUE',
        N'KSOURCE_WAKEUP', N'LAZYWRITER_SLEEP', N'LOGMGR_QUEUE', N'ONDEMAND_TASK_QUEUE',
        N'PWAIT_ALL_COMPONENTS_INITIALIZED', N'QDS_PERSIST_TASK_MAIN_LOOP_SLEEP',
        N'QDS_CLEANUP_STALE_QUERIES_TASK_MAIN_LOOP_SLEEP', N'REQUEST_FOR_DEADLOCK_SEARCH',
		N'RESOURCE_QUEUE', N'SERVER_IDLE_CHECK', N'SLEEP_BPOOL_FLUSH', N'SLEEP_DBSTARTUP',
		N'SLEEP_DCOMSTARTUP', N'SLEEP_MASTERDBREADY', N'SLEEP_MASTERMDREADY',
        N'SLEEP_MASTERUPGRADED', N'SLEEP_MSDBSTARTUP', N'SLEEP_SYSTEMTASK', N'SLEEP_TASK',
        N'SLEEP_TEMPDBSTARTUP', N'SNI_HTTP_ACCEPT', N'SP_SERVER_DIAGNOSTICS_SLEEP',
		N'SQLTRACE_BUFFER_FLUSH', N'SQLTRACE_INCREMENTAL_FLUSH_SLEEP', N'SQLTRACE_WAIT_ENTRIES',
		N'WAIT_FOR_RESULTS', N'WAITFOR', N'WAITFOR_TASKSHUTDOWN', N'WAIT_XTP_HOST_WAIT',
		N'WAIT_XTP_OFFLINE_CKPT_NEW_LOG', N'WAIT_XTP_CKPT_CLOSE', N'XE_DISPATCHER_JOIN',
        N'XE_DISPATCHER_WAIT', N'XE_TIMER_EVENT')
    AND waiting_tasks_count > 0)
SELECT
    MAX (W1.wait_type) AS [WaitType],
	CAST (MAX (W1.Percentage) AS DECIMAL (5,2)) AS [Wait Percentage],
	CAST ((MAX (W1.WaitS) / MAX (W1.WaitCount)) AS DECIMAL (16,4)) AS [AvgWait_Sec],
    CAST ((MAX (W1.ResourceS) / MAX (W1.WaitCount)) AS DECIMAL (16,4)) AS [AvgRes_Sec],
    CAST ((MAX (W1.SignalS) / MAX (W1.WaitCount)) AS DECIMAL (16,4)) AS [AvgSig_Sec], 
    CAST (MAX (W1.WaitS) AS DECIMAL (16,2)) AS [Wait_Sec],
    CAST (MAX (W1.ResourceS) AS DECIMAL (16,2)) AS [Resource_Sec],
    CAST (MAX (W1.SignalS) AS DECIMAL (16,2)) AS [Signal_Sec],
    MAX (W1.WaitCount) AS [Wait Count],
	CAST (N'https://www.sqlskills.com/help/waits/' + W1.wait_type AS XML) AS [Help/Info URL]
FROM Waits AS W1
INNER JOIN Waits AS W2
ON W2.RowNum <= W1.RowNum
GROUP BY W1.RowNum, W1.wait_type
HAVING SUM (W2.Percentage) - MAX (W1.Percentage) < 99 -- percentage threshold
OPTION (RECOMPILE);
------

-- Cumulative wait stats are not as useful on an idle instance that is not under load or performance pressure

-- SQL Server Wait Types Library (Paul Randal)
-- https://www.sqlskills.com/help/waits/

-- The SQL Server Wait Type Repository
-- http://blogs.msdn.com/b/psssql/archive/2009/11/03/the-sql-server-wait-type-repository.aspx

-- Wait statistics, or please tell me where it hurts
-- https://www.sqlskills.com/blogs/paul/wait-statistics-or-please-tell-me-where-it-hurts/

-- SQL Server 2005 Performance Tuning using the Waits and Queues
-- http://technet.microsoft.com/en-us/library/cc966413.aspx

-- sys.dm_os_wait_stats (Transact-SQL)
-- http://msdn.microsoft.com/en-us/library/ms179984(v=sql.105).aspx




-- Signal Waits for instance  (Query 28) (Signal Waits)
SELECT CAST(100.0 * SUM(signal_wait_time_ms) / SUM (wait_time_ms) AS NUMERIC(20,2)) AS [% Signal (CPU) Waits],
CAST(100.0 * SUM(wait_time_ms - signal_wait_time_ms) / SUM (wait_time_ms) AS NUMERIC(20,2)) AS [% Resource Waits]
FROM sys.dm_os_wait_stats WITH (NOLOCK)
WHERE wait_type NOT IN (
        N'BROKER_EVENTHANDLER', N'BROKER_RECEIVE_WAITFOR', N'BROKER_TASK_STOP',
		N'BROKER_TO_FLUSH', N'BROKER_TRANSMITTER', N'CHECKPOINT_QUEUE',
        N'CHKPT', N'CLR_AUTO_EVENT', N'CLR_MANUAL_EVENT', N'CLR_SEMAPHORE',
        N'DBMIRROR_DBM_EVENT', N'DBMIRROR_EVENTS_QUEUE', N'DBMIRROR_WORKER_QUEUE',
		N'DBMIRRORING_CMD', N'DIRTY_PAGE_POLL', N'DISPATCHER_QUEUE_SEMAPHORE',
        N'EXECSYNC', N'FSAGENT', N'FT_IFTS_SCHEDULER_IDLE_WAIT', N'FT_IFTSHC_MUTEX',
        N'HADR_CLUSAPI_CALL', N'HADR_FILESTREAM_IOMGR_IOCOMPLETION', N'HADR_LOGCAPTURE_WAIT', 
		N'HADR_NOTIFICATION_DEQUEUE', N'HADR_TIMER_TASK', N'HADR_WORK_QUEUE',
        N'KSOURCE_WAKEUP', N'LAZYWRITER_SLEEP', N'LOGMGR_QUEUE', N'ONDEMAND_TASK_QUEUE',
        N'PWAIT_ALL_COMPONENTS_INITIALIZED', N'QDS_PERSIST_TASK_MAIN_LOOP_SLEEP',
        N'QDS_CLEANUP_STALE_QUERIES_TASK_MAIN_LOOP_SLEEP', N'REQUEST_FOR_DEADLOCK_SEARCH',
		N'RESOURCE_QUEUE', N'SERVER_IDLE_CHECK', N'SLEEP_BPOOL_FLUSH', N'SLEEP_DBSTARTUP',
		N'SLEEP_DCOMSTARTUP', N'SLEEP_MASTERDBREADY', N'SLEEP_MASTERMDREADY',
        N'SLEEP_MASTERUPGRADED', N'SLEEP_MSDBSTARTUP', N'SLEEP_SYSTEMTASK', N'SLEEP_TASK',
        N'SLEEP_TEMPDBSTARTUP', N'SNI_HTTP_ACCEPT', N'SP_SERVER_DIAGNOSTICS_SLEEP',
		N'SQLTRACE_BUFFER_FLUSH', N'SQLTRACE_INCREMENTAL_FLUSH_SLEEP', N'SQLTRACE_WAIT_ENTRIES',
		N'WAIT_FOR_RESULTS', N'WAITFOR', N'WAITFOR_TASKSHUTDOWN', N'WAIT_XTP_HOST_WAIT',
		N'WAIT_XTP_OFFLINE_CKPT_NEW_LOG', N'WAIT_XTP_CKPT_CLOSE', N'XE_DISPATCHER_JOIN',
        N'XE_DISPATCHER_WAIT', N'XE_TIMER_EVENT') OPTION (RECOMPILE);
------

-- Signal Waits above 10-15% is usually a confirming sign of CPU pressure
-- Cumulative wait stats are not as useful on an idle instance that is not under load or performance pressure
-- Resource waits are non-CPU related waits


--  Get logins that are connected and how many sessions they have (Query 29) (Connection Counts)
SELECT login_name, [program_name], COUNT(session_id) AS [session_count] 
FROM sys.dm_exec_sessions WITH (NOLOCK)
GROUP BY login_name, [program_name]
ORDER BY COUNT(session_id) DESC OPTION (RECOMPILE);
------

-- This can help characterize your workload and
-- determine whether you are seeing a normal level of activity


-- Get a count of SQL connections by IP address (Query 30) (Connection Counts by IP Address)
SELECT ec.client_net_address, es.[program_name], es.[host_name], es.login_name, 
COUNT(ec.session_id) AS [connection count] 
FROM sys.dm_exec_sessions AS es WITH (NOLOCK) 
INNER JOIN sys.dm_exec_connections AS ec WITH (NOLOCK) 
ON es.session_id = ec.session_id 
GROUP BY ec.client_net_address, es.[program_name], es.[host_name], es.login_name  
ORDER BY ec.client_net_address, es.[program_name] OPTION (RECOMPILE);
------

-- This helps you figure where your database load is coming from
-- and verifies connectivity from other machines


-- Get Average Task Counts (run multiple times) (Query 31) (Avg Task Counts)
SELECT AVG(current_tasks_count) AS [Avg Task Count], 
AVG(runnable_tasks_count) AS [Avg Runnable Task Count],
AVG(pending_disk_io_count) AS [Avg Pending DiskIO Count]
FROM sys.dm_os_schedulers WITH (NOLOCK)
WHERE scheduler_id < 255 OPTION (RECOMPILE);
------

-- Sustained values above 10 suggest further investigation in that area
-- High Avg Task Counts are often caused by blocking/deadlocking or other resource contention

-- Sustained values above 1 suggest further investigation in that area
-- High Avg Runnable Task Counts are a good sign of CPU pressure
-- High Avg Pending DiskIO Counts are a sign of disk pressure

-- How to Do Some Very Basic SQL Server Monitoring
-- https://www.sqlskills.com/blogs/glenn/how-to-do-some-very-basic-sql-server-monitoring/



-- Get CPU Utilization History for last 256 minutes (in one minute intervals)  (Query 32) (CPU Utilization History)
-- This version works with SQL Server 2008 R2
DECLARE @ts_now bigint = (SELECT cpu_ticks/(cpu_ticks/ms_ticks) FROM sys.dm_os_sys_info WITH (NOLOCK)); 

SELECT TOP(256) SQLProcessUtilization AS [SQL Server Process CPU Utilization], 
               SystemIdle AS [System Idle Process], 
               100 - SystemIdle - SQLProcessUtilization AS [Other Process CPU Utilization], 
               DATEADD(ms, -1 * (@ts_now - [timestamp]), GETDATE()) AS [Event Time] 
FROM ( 
	  SELECT record.value('(./Record/@id)[1]', 'int') AS record_id, 
			record.value('(./Record/SchedulerMonitorEvent/SystemHealth/SystemIdle)[1]', 'int') 
			AS [SystemIdle], 
			record.value('(./Record/SchedulerMonitorEvent/SystemHealth/ProcessUtilization)[1]', 
			'int') 
			AS [SQLProcessUtilization], [timestamp] 
	  FROM ( 
			SELECT [timestamp], CONVERT(xml, record) AS [record] 
			FROM sys.dm_os_ring_buffers WITH (NOLOCK)
			WHERE ring_buffer_type = N'RING_BUFFER_SCHEDULER_MONITOR' 
			AND record LIKE N'%<SystemHealth>%') AS x 
	  ) AS y 
ORDER BY record_id DESC OPTION (RECOMPILE);
------

-- Look at the trend over the entire period. 
-- Also look at high sustained Other Process CPU Utilization values


-- Get top total worker time queries for entire instance (Query 33) (Top Worker Time Queries)
SELECT TOP(50) DB_NAME(t.[dbid]) AS [Database Name], t.[text] AS [Query Text],  
qs.total_worker_time AS [Total Worker Time], qs.min_worker_time AS [Min Worker Time],
qs.total_worker_time/qs.execution_count AS [Avg Worker Time], 
qs.max_worker_time AS [Max Worker Time], qs.execution_count AS [Execution Count], 
qs.total_elapsed_time/qs.execution_count AS [Avg Elapsed Time], 
qs.total_logical_reads/qs.execution_count AS [Avg Logical Reads], 
qs.total_physical_reads/qs.execution_count AS [Avg Physical Reads], qs.creation_time AS [Creation Time]
, qp.query_plan AS [Query Plan] -- comment out this column if copying results to Excel
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(plan_handle) AS t 
CROSS APPLY sys.dm_exec_query_plan(plan_handle) AS qp 
ORDER BY qs.total_worker_time DESC OPTION (RECOMPILE);
------


-- Helps you find the most expensive queries from a CPU perspective across the entire instance



-- Good basic information about OS memory amounts and state  (Query 34) (System Memory)
SELECT total_physical_memory_kb/1024 AS [Physical Memory (MB)], 
       available_physical_memory_kb/1024 AS [Available Memory (MB)], 
       total_page_file_kb/1024 AS [Total Page File (MB)], 
	   available_page_file_kb/1024 AS [Available Page File (MB)], 
	   system_cache_kb/1024 AS [System Cache (MB)],
       system_memory_state_desc AS [System Memory State]
FROM sys.dm_os_sys_memory WITH (NOLOCK) OPTION (RECOMPILE);
------

-- You want to see "Available physical memory is high"
-- This indicates that you are not under external memory pressure


-- SQL Server Process Address space info  (Query 35) (Process Memory) 
-- (shows whether locked pages is enabled, among other things)
SELECT physical_memory_in_use_kb/1024 AS [SQL Server Memory Usage (MB)],
       large_page_allocations_kb, locked_page_allocations_kb, page_fault_count, 
	   memory_utilization_percentage, available_commit_limit_kb, 
	   process_physical_memory_low, process_virtual_memory_low
FROM sys.dm_os_process_memory WITH (NOLOCK) OPTION (RECOMPILE);
------

-- You want to see 0 for process_physical_memory_low
-- You want to see 0 for process_virtual_memory_low
-- This indicates that you are not under internal memory pressure


-- Page Life Expectancy (PLE) value for each NUMA node in current instance  (Query 36) (PLE by NUMA Node)
SELECT @@SERVERNAME AS [Server Name], RTRIM([object_name]) AS [Object Name], instance_name, cntr_value AS [Page Life Expectancy]
FROM sys.dm_os_performance_counters WITH (NOLOCK)
WHERE [object_name] LIKE N'%Buffer Node%' -- Handles named instances
AND counter_name = N'Page life expectancy' OPTION (RECOMPILE);
------

-- PLE is a good measurement of memory pressure.
-- Higher PLE is better. Watch the trend over time, not the absolute value.
-- This will only return one row for non-NUMA systems.

-- Page Life Expectancy isn�t what you think�
-- https://www.sqlskills.com/blogs/paul/page-life-expectancy-isnt-what-you-think/



-- Memory Grants Pending value for current instance  (Query 37) (Memory Grants Pending)
SELECT @@SERVERNAME AS [Server Name], RTRIM([object_name]) AS [Object Name], cntr_value AS [Memory Grants Pending]                                                                                                       
FROM sys.dm_os_performance_counters WITH (NOLOCK)
WHERE [object_name] LIKE N'%Memory Manager%' -- Handles named instances
AND counter_name = N'Memory Grants Pending' OPTION (RECOMPILE);
------

-- Memory Grants Pending above zero for a sustained period is a very strong indicator of memory pressure


-- Memory Clerk Usage for instance  (Query 38) (Memory Clerk Usage)
-- Look for high value for CACHESTORE_SQLCP (Ad-hoc query plans)
SELECT TOP(10) [type] AS [Memory Clerk Type], SUM(single_pages_kb)/1024 AS [SPA Memory Usage (MB)] 
FROM sys.dm_os_memory_clerks WITH (NOLOCK)
GROUP BY [type]  
ORDER BY SUM(single_pages_kb) DESC OPTION (RECOMPILE);
------

-- CACHESTORE_SQLCP  SQL Plans         
-- These are cached SQL statements or batches that aren't in stored procedures, functions and triggers
-- Watch out for high values for CACHESTORE_SQLCP

-- CACHESTORE_OBJCP  Object Plans      
-- These are compiled plans for stored procedures, functions and triggers



-- Find single-use, ad-hoc and prepared queries that are bloating the plan cache  (Query 39) (Ad hoc Queries)
SELECT TOP(50) DB_NAME(t.[dbid]) AS [Database Name], t.[text] AS [Query Text], 
cp.objtype AS [Object Type], cp.cacheobjtype AS [Cache Object Type],  
cp.size_in_bytes/1024 AS [Plan Size in KB]
FROM sys.dm_exec_cached_plans AS cp WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(plan_handle) AS t
WHERE cp.cacheobjtype = N'Compiled Plan' 
AND cp.objtype IN (N'Adhoc', N'Prepared') 
AND cp.usecounts = 1
ORDER BY cp.size_in_bytes DESC, DB_NAME(t.[dbid]) OPTION (RECOMPILE);
------

-- Gives you the text, type and size of single-use ad-hoc and prepared queries that waste space in the plan cache
-- Enabling 'optimize for ad hoc workloads' for the instance can help (SQL Server 2008 and above only)
-- Running DBCC FREESYSTEMCACHE ('SQL Plans') periodically may be required to better control this.
-- Enabling forced parameterization for the database can help, but test first!

-- Plan cache, adhoc workloads and clearing the single-use plan cache bloat
-- https://www.sqlskills.com/blogs/kimberly/plan-cache-adhoc-workloads-and-clearing-the-single-use-plan-cache-bloat/



-- Database specific queries *****************************************************************

-- **** Please switch to a user database that you are interested in! *****
USE YourDatabaseName; -- make sure to change to an actual database on your instance, not the master system database
GO

-- Individual File Sizes and space available for current database  (Query 40) (File Sizes and Space)
SELECT f.name AS [File Name] , f.physical_name AS [Physical Name], 
CAST((f.size/128.0) AS DECIMAL(15,2)) AS [Total Size in MB],
CAST(f.size/128.0 - CAST(FILEPROPERTY(f.name, 'SpaceUsed') AS int)/128.0 AS DECIMAL(15,2)) 
AS [Available Space In MB], [file_id], fg.name AS [Filegroup Name]
FROM sys.database_files AS f WITH (NOLOCK) 
LEFT OUTER JOIN sys.data_spaces AS fg WITH (NOLOCK) 
ON f.data_space_id = fg.data_space_id OPTION (RECOMPILE);
------

-- Look at how large and how full the files are and where they are located
-- Make sure the transaction log is not full!!



-- I/O Statistics by file for the current database  (Query 41) (IO Stats By File)
SELECT DB_NAME(DB_ID()) AS [Database Name], df.name AS [Logical Name], vfs.[file_id], 
df.physical_name AS [Physical Name], vfs.num_of_reads, vfs.num_of_writes, vfs.io_stall_read_ms, vfs.io_stall_write_ms,
CAST(100. * vfs.io_stall_read_ms/(vfs.io_stall_read_ms + vfs.io_stall_write_ms) AS DECIMAL(10,1)) AS [IO Stall Reads Pct],
CAST(100. * vfs.io_stall_write_ms/(vfs.io_stall_write_ms + vfs.io_stall_read_ms) AS DECIMAL(10,1)) AS [IO Stall Writes Pct],
(vfs.num_of_reads + vfs.num_of_writes) AS [Writes + Reads], 
CAST(vfs.num_of_bytes_read/1048576.0 AS DECIMAL(10, 2)) AS [MB Read], 
CAST(vfs.num_of_bytes_written/1048576.0 AS DECIMAL(10, 2)) AS [MB Written],
CAST(100. * vfs.num_of_reads/(vfs.num_of_reads + vfs.num_of_writes) AS DECIMAL(10,1)) AS [# Reads Pct],
CAST(100. * vfs.num_of_writes/(vfs.num_of_reads + vfs.num_of_writes) AS DECIMAL(10,1)) AS [# Write Pct],
CAST(100. * vfs.num_of_bytes_read/(vfs.num_of_bytes_read + vfs.num_of_bytes_written) AS DECIMAL(10,1)) AS [Read Bytes Pct],
CAST(100. * vfs.num_of_bytes_written/(vfs.num_of_bytes_read + vfs.num_of_bytes_written) AS DECIMAL(10,1)) AS [Written Bytes Pct]
FROM sys.dm_io_virtual_file_stats(DB_ID(), NULL) AS vfs
INNER JOIN sys.database_files AS df WITH (NOLOCK)
ON vfs.[file_id]= df.[file_id] OPTION (RECOMPILE);
------

-- This helps you characterize your workload better from an I/O perspective for this database
-- It helps you determine whether you has an OLTP or DW/DSS type of workload



-- Top cached queries by Execution Count (SQL Server 2008 R2)  (Query 42) (Query Execution Counts)
-- SQL Server 2008 R2 SP1 and greater only
SELECT TOP (100) qs.execution_count, qs.total_rows, qs.last_rows, qs.min_rows, qs.max_rows,
qs.last_elapsed_time, qs.min_elapsed_time, qs.max_elapsed_time,
total_worker_time, total_logical_reads, 
SUBSTRING(qt.TEXT,qs.statement_start_offset/2 +1,
(CASE WHEN qs.statement_end_offset = -1
			THEN LEN(CONVERT(NVARCHAR(MAX), qt.TEXT)) * 2
	  ELSE qs.statement_end_offset END - qs.statement_start_offset)/2) AS query_text 
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(qs.sql_handle) AS qt
ORDER BY qs.execution_count DESC OPTION (RECOMPILE);
------

-- Uses several new rows returned columns to help troubleshoot performance problems


-- Top Cached SPs By Execution Count (SQL 2008 R2) (Query 43) (SP Execution Counts)
SELECT TOP(100) p.name AS [SP Name], qs.execution_count,
ISNULL(qs.execution_count/DATEDIFF(Minute, qs.cached_time, GETDATE()), 0) AS [Calls/Minute],
qs.total_worker_time/qs.execution_count AS [AvgWorkerTime], qs.total_worker_time AS [TotalWorkerTime],  
qs.total_elapsed_time, qs.total_elapsed_time/qs.execution_count AS [avg_elapsed_time],
qs.cached_time
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
WHERE qs.database_id = DB_ID()
ORDER BY qs.execution_count DESC OPTION (RECOMPILE);
------

-- Tells you which cached stored procedures are called the most often
-- This helps you characterize and baseline your workload


-- Top Cached SPs By Avg Elapsed Time (SQL 2008 R2)  (Query 44) (SP Avg Elapsed Time) 
SELECT TOP(25) p.name AS [SP Name], qs.total_elapsed_time/qs.execution_count AS [avg_elapsed_time], 
qs.total_elapsed_time, qs.execution_count, ISNULL(qs.execution_count/DATEDIFF(Minute, qs.cached_time, 
GETDATE()), 0) AS [Calls/Minute], qs.total_worker_time/qs.execution_count AS [AvgWorkerTime], 
qs.total_worker_time AS [TotalWorkerTime], qs.cached_time
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
WHERE qs.database_id = DB_ID()
ORDER BY avg_elapsed_time DESC OPTION (RECOMPILE);
------

-- This helps you find long-running cached stored procedures that
-- may be easy to optimize with standard query tuning techniques


-- Top Cached SPs By Avg Elapsed Time with execution time variability   (Query 45) (SP Avg Elapsed Variable Time)
SELECT TOP(25) p.name AS [SP Name], qs.execution_count, qs.min_elapsed_time,
qs.total_elapsed_time/qs.execution_count AS [avg_elapsed_time],
qs.max_elapsed_time, qs.last_elapsed_time,  qs.cached_time
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
WHERE qs.database_id = DB_ID()
ORDER BY avg_elapsed_time DESC OPTION (RECOMPILE);
------

-- This gives you some interesting information about the variability in the
-- execution time of your cached stored procedures, which is useful for tuning


-- Top Cached SPs By Total Worker time (SQL 2008 R2). Worker time relates to CPU cost  (Query 46) (SP Worker Time)
SELECT TOP(25) p.name AS [SP Name], qs.total_worker_time AS [TotalWorkerTime], 
qs.total_worker_time/qs.execution_count AS [AvgWorkerTime], qs.execution_count, 
ISNULL(qs.execution_count/DATEDIFF(Minute, qs.cached_time, GETDATE()), 0) AS [Calls/Minute],
qs.total_elapsed_time, qs.total_elapsed_time/qs.execution_count 
AS [avg_elapsed_time], qs.cached_time
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
WHERE qs.database_id = DB_ID()
ORDER BY qs.total_worker_time DESC OPTION (RECOMPILE);

-- This helps you find the most expensive cached stored procedures from a CPU perspective
-- You should look at this if you see signs of CPU pressure


-- Top Cached SPs By Total Logical Reads (SQL 2008 R2). Logical reads relate to memory pressure  (Query 47) (SP Logical Reads)
SELECT TOP(25) p.name AS [SP Name], qs.total_logical_reads AS [TotalLogicalReads], 
qs.total_logical_reads/qs.execution_count AS [AvgLogicalReads],qs.execution_count, 
ISNULL(qs.execution_count/DATEDIFF(Minute, qs.cached_time, GETDATE()), 0) AS [Calls/Minute], 
qs.total_elapsed_time, qs.total_elapsed_time/qs.execution_count 
AS [avg_elapsed_time], qs.cached_time
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
WHERE qs.database_id = DB_ID()
ORDER BY qs.total_logical_reads DESC OPTION (RECOMPILE);
------

-- This helps you find the most expensive cached stored procedures from a memory perspective
-- You should look at this if you see signs of memory pressure


-- Top Cached SPs By Total Physical Reads (SQL 2008 R2). Physical reads relate to disk I/O pressure  (Query 48) (SP Physical Reads)
SELECT TOP(25) p.name AS [SP Name],qs.total_physical_reads AS [TotalPhysicalReads], 
qs.total_physical_reads/qs.execution_count AS [AvgPhysicalReads], qs.execution_count, 
qs.total_logical_reads,qs.total_elapsed_time, qs.total_elapsed_time/qs.execution_count 
AS [avg_elapsed_time], qs.cached_time 
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
WHERE qs.database_id = DB_ID()
AND qs.total_physical_reads > 0
ORDER BY qs.total_physical_reads DESC, qs.total_logical_reads DESC OPTION (RECOMPILE);
------

-- This helps you find the most expensive cached stored procedures from a read I/O perspective
-- You should look at this if you see signs of I/O pressure or of memory pressure
       
-- Top Cached SPs By Total Logical Writes (SQL 2008 R2)  (Query 49) (SP Logical Writes)
-- Logical writes relate to both memory and disk I/O pressure 
SELECT TOP(25) p.name AS [SP Name], qs.total_logical_writes AS [TotalLogicalWrites], 
qs.total_logical_writes/qs.execution_count AS [AvgLogicalWrites], qs.execution_count,
ISNULL(qs.execution_count/DATEDIFF(Second, qs.cached_time, GETDATE()), 0) AS [Calls/Second],
qs.total_elapsed_time, qs.total_elapsed_time/qs.execution_count AS [avg_elapsed_time], 
qs.cached_time
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
WHERE qs.database_id = DB_ID()
AND qs.total_logical_writes > 0
ORDER BY qs.total_logical_writes DESC OPTION (RECOMPILE);
------

-- This helps you find the most expensive cached stored procedures from a write I/O perspective
-- You should look at this if you see signs of I/O pressure or of memory pressure


-- Lists the top statements by average input/output usage for the current database  (Query 50) (Top IO Statements)
SELECT TOP(50) OBJECT_NAME(qt.objectid, dbid) AS [SP Name],
(qs.total_logical_reads + qs.total_logical_writes) /qs.execution_count AS [Avg IO], qs.execution_count AS [Execution Count],
SUBSTRING(qt.[text],qs.statement_start_offset/2, 
	(CASE 
		WHEN qs.statement_end_offset = -1 
	 THEN LEN(CONVERT(nvarchar(max), qt.[text])) * 2 
		ELSE qs.statement_end_offset 
	 END - qs.statement_start_offset)/2) AS [Query Text]	
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(qs.sql_handle) AS qt
WHERE qt.[dbid] = DB_ID()
ORDER BY [Avg IO] DESC OPTION (RECOMPILE);
------

-- Helps you find the most expensive statements for I/O by SP



-- Possible Bad NC Indexes (writes > reads)  (Query 51) (Bad NC Indexes)
SELECT OBJECT_NAME(s.[object_id]) AS [Table Name], i.name AS [Index Name], i.index_id, 
i.is_disabled, i.is_hypothetical, i.has_filter, i.fill_factor,
user_updates AS [Total Writes], user_seeks + user_scans + user_lookups AS [Total Reads],
user_updates - (user_seeks + user_scans + user_lookups) AS [Difference]
FROM sys.dm_db_index_usage_stats AS s WITH (NOLOCK)
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON s.[object_id] = i.[object_id]
AND i.index_id = s.index_id
WHERE OBJECTPROPERTY(s.[object_id],'IsUserTable') = 1
AND s.database_id = DB_ID()
AND s.user_updates > (s.user_seeks + s.user_scans + s.user_lookups)
AND i.index_id > 1 AND i.[type_desc] = N'NONCLUSTERED'
AND i.is_primary_key = 0 AND i.is_unique_constraint = 0
ORDER BY [Difference] DESC, [Total Writes] DESC, [Total Reads] ASC OPTION (RECOMPILE);
------

-- Look for indexes with high numbers of writes and zero or very low numbers of reads
-- Consider your complete workload, and how long your instance has been running
-- Investigate further before dropping an index!


-- Missing Indexes for current database by Index Advantage  (Query 52) (Missing Indexes)
SELECT DISTINCT CONVERT(decimal(18,2), user_seeks * avg_total_user_cost * (avg_user_impact * 0.01)) AS [index_advantage], 
migs.last_user_seek, mid.[statement] AS [Database.Schema.Table],
mid.equality_columns, mid.inequality_columns, mid.included_columns,
migs.unique_compiles, migs.user_seeks, migs.avg_total_user_cost, migs.avg_user_impact,
OBJECT_NAME(mid.[object_id]) AS [Table Name], p.rows AS [Table Rows]
FROM sys.dm_db_missing_index_group_stats AS migs WITH (NOLOCK)
INNER JOIN sys.dm_db_missing_index_groups AS mig WITH (NOLOCK)
ON migs.group_handle = mig.index_group_handle
INNER JOIN sys.dm_db_missing_index_details AS mid WITH (NOLOCK)
ON mig.index_handle = mid.index_handle
INNER JOIN sys.partitions AS p WITH (NOLOCK)
ON p.[object_id] = mid.[object_id]
WHERE mid.database_id = DB_ID()
AND p.index_id < 2 
ORDER BY index_advantage DESC OPTION (RECOMPILE);
------

-- Look at index advantage, last user seek time, number of user seeks to help determine source and importance
-- SQL Server is overly eager to add included columns, so beware
-- Do not just blindly add indexes that show up from this query!!!


-- Find missing index warnings for cached plans in the current database  (Query 53) (Missing Index Warnings)
-- Note: This query could take some time on a busy instance
SELECT TOP(25) OBJECT_NAME(objectid) AS [ObjectName], 
               query_plan, cp.objtype, cp.usecounts
FROM sys.dm_exec_cached_plans AS cp WITH (NOLOCK)
CROSS APPLY sys.dm_exec_query_plan(cp.plan_handle) AS qp
WHERE CAST(query_plan AS NVARCHAR(MAX)) LIKE N'%MissingIndex%'
AND dbid = DB_ID()
ORDER BY cp.usecounts DESC OPTION (RECOMPILE);
------

-- Helps you connect missing indexes to specific stored procedures
-- This can help you decide whether to add them or not


-- Breaks down buffers used by current database by object (table, index) in the buffer cache  (Query 54) (Buffer Usage)
-- Note: This query could take some time on a busy instance
SELECT OBJECT_NAME(p.[object_id]) AS [Object Name], p.index_id, 
CAST(COUNT(*)/128.0 AS DECIMAL(10, 2)) AS [Buffer size(MB)],  
COUNT(*) AS [BufferCount], p.Rows AS [Row Count],
p.data_compression_desc AS [Compression Type]
FROM sys.allocation_units AS a WITH (NOLOCK)
INNER JOIN sys.dm_os_buffer_descriptors AS b WITH (NOLOCK)
ON a.allocation_unit_id = b.allocation_unit_id
INNER JOIN sys.partitions AS p WITH (NOLOCK)
ON a.container_id = p.hobt_id
WHERE b.database_id = CONVERT(int,DB_ID())
AND p.[object_id] > 100
AND OBJECT_NAME(p.[object_id]) NOT LIKE N'plan_%'
AND OBJECT_NAME(p.[object_id]) NOT LIKE N'sys%'
AND OBJECT_NAME(p.[object_id]) NOT LIKE N'xml_index_nodes%'
GROUP BY p.[object_id], p.index_id, p.data_compression_desc, p.[Rows]
ORDER BY [BufferCount] DESC OPTION (RECOMPILE);
------

-- Tells you what tables and indexes are using the most memory in the buffer cache
-- It can help identify possible candidates for data compression


-- Get Table names, row counts, and compression status for clustered index or heap  (Query 55) (Table Sizes)
SELECT OBJECT_NAME(object_id) AS [ObjectName], 
SUM(Rows) AS [RowCount], data_compression_desc AS [CompressionType]
FROM sys.partitions WITH (NOLOCK)
WHERE index_id < 2 --ignore the partitions from the non-clustered index if any
AND OBJECT_NAME(object_id) NOT LIKE N'sys%'
AND OBJECT_NAME(object_id) NOT LIKE N'queue_%' 
AND OBJECT_NAME(object_id) NOT LIKE N'filestream_tombstone%' 
AND OBJECT_NAME(object_id) NOT LIKE N'fulltext%'
AND OBJECT_NAME(object_id) NOT LIKE N'ifts_comp_fragment%'
AND OBJECT_NAME(object_id) NOT LIKE N'xml_index_nodes%'
GROUP BY object_id, data_compression_desc
ORDER BY SUM(Rows) DESC OPTION (RECOMPILE);
------

-- Gives you an idea of table sizes, and possible data compression opportunities



-- Get some key table properties (Query 56) (Table Properties)
SELECT [name], create_date, lock_on_bulk_load, is_replicated, has_replication_filter, 
       is_tracked_by_cdc, lock_escalation_desc
FROM sys.tables WITH (NOLOCK) 
ORDER BY [name] OPTION (RECOMPILE);
------

-- Gives you some good information about your tables


-- Detect blocking (run multiple times)  (Query 57) (Detect Blocking)
SELECT t1.resource_type AS [lock type], DB_NAME(resource_database_id) AS [database],
t1.resource_associated_entity_id AS [blk object],t1.request_mode AS [lock req],  --- lock requested
t1.request_session_id AS [waiter sid], t2.wait_duration_ms AS [wait time],       -- spid of waiter  
(SELECT [text] FROM sys.dm_exec_requests AS r WITH (NOLOCK)                      -- get sql for waiter
CROSS APPLY sys.dm_exec_sql_text(r.[sql_handle]) 
WHERE r.session_id = t1.request_session_id) AS [waiter_batch],
(SELECT SUBSTRING(qt.[text],r.statement_start_offset/2, 
    (CASE WHEN r.statement_end_offset = -1 
    THEN LEN(CONVERT(nvarchar(max), qt.[text])) * 2 
    ELSE r.statement_end_offset END - r.statement_start_offset)/2) 
FROM sys.dm_exec_requests AS r WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(r.[sql_handle]) AS qt
WHERE r.session_id = t1.request_session_id) AS [waiter_stmt],					-- statement blocked
t2.blocking_session_id AS [blocker sid],										-- spid of blocker
(SELECT [text] FROM sys.sysprocesses AS p										-- get sql for blocker
CROSS APPLY sys.dm_exec_sql_text(p.[sql_handle]) 
WHERE p.spid = t2.blocking_session_id) AS [blocker_stmt]
FROM sys.dm_tran_locks AS t1 WITH (NOLOCK)
INNER JOIN sys.dm_os_waiting_tasks AS t2 WITH (NOLOCK)
ON t1.lock_owner_address = t2.resource_address OPTION (RECOMPILE);
------

-- Helps troubleshoot blocking and deadlocking issues
-- The results will change from second to second on a busy system
-- You should run this query multiple times when you see signs of blocking



-- When were Statistics last updated on all indexes?  (Query 58) (Statistics Update)
SELECT SCHEMA_NAME(o.Schema_ID) + N'.' + o.NAME AS [Object Name], o.type_desc AS [Object Type],
      i.name AS [Index Name], STATS_DATE(i.[object_id], i.index_id) AS [Statistics Date], 
      s.auto_created, s.no_recompute, s.user_created, st.row_count, st.used_page_count
FROM sys.objects AS o WITH (NOLOCK)
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON o.[object_id] = i.[object_id]
INNER JOIN sys.stats AS s WITH (NOLOCK)
ON i.[object_id] = s.[object_id] 
AND i.index_id = s.stats_id
INNER JOIN sys.dm_db_partition_stats AS st WITH (NOLOCK)
ON o.[object_id] = st.[object_id]
AND i.[index_id] = st.[index_id]
WHERE o.[type] IN ('U', 'V')
AND st.row_count > 0
ORDER BY STATS_DATE(i.[object_id], i.index_id) DESC OPTION (RECOMPILE);
------  

-- Helps discover possible problems with out-of-date statistics
-- Also gives you an idea which indexes are the most active


-- Look at most frequently modified indexes and statistics (Query 59) (Volatile Indexes)
-- Requires SQL Server 2008 R2 SP2 or newer
SELECT o.name AS [Object Name], o.[object_id], o.type_desc, s.name AS [Statistics Name], 
       s.stats_id, s.no_recompute, s.auto_created, 
	   sp.modification_counter, sp.rows, sp.rows_sampled, sp.last_updated
FROM sys.objects AS o WITH (NOLOCK)
INNER JOIN sys.stats AS s WITH (NOLOCK)
ON s.object_id = o.object_id
CROSS APPLY sys.dm_db_stats_properties(s.object_id, s.stats_id) AS sp
WHERE o.type_desc NOT IN (N'SYSTEM_TABLE', N'INTERNAL_TABLE')
AND sp.modification_counter > 0
ORDER BY sp.modification_counter DESC, o.name OPTION (RECOMPILE);
------


-- Get fragmentation info for all indexes above a certain size in the current database  (Query 60) (Index Fragmentation)
-- Note: This query could take some time on a very large database
SELECT DB_NAME(ps.database_id) AS [Database Name], SCHEMA_NAME(o.[schema_id]) AS [Schema Name],
OBJECT_NAME(ps.OBJECT_ID) AS [Object Name], 
i.name AS [Index Name], ps.index_id, ps.index_type_desc, ps.avg_fragmentation_in_percent, 
ps.fragment_count, ps.page_count, i.fill_factor, i.has_filter, i.filter_definition, i.allow_page_locks
FROM sys.dm_db_index_physical_stats(DB_ID(),NULL, NULL, NULL , N'LIMITED') AS ps
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON ps.[object_id] = i.[object_id] 
AND ps.index_id = i.index_id
INNER JOIN sys.objects AS o WITH (NOLOCK)
ON i.[object_id] = o.[object_id]
WHERE ps.database_id = DB_ID()
AND ps.page_count > 2500
ORDER BY ps.avg_fragmentation_in_percent DESC OPTION (RECOMPILE);
------

-- Helps determine whether you have framentation in your relational indexes
-- and how effective your index maintenance strategy is


--- Index Read/Write stats (all tables in current DB) ordered by Reads  (Query 61) (Overall Index Usage - Reads)
SELECT OBJECT_NAME(s.[object_id]) AS [ObjectName], i.name AS [IndexName], i.index_id,
	   user_seeks + user_scans + user_lookups AS [Reads], s.user_updates AS [Writes],  
	   i.type_desc AS [IndexType], i.fill_factor AS [FillFactor], i.has_filter, i.filter_definition, 
	   s.last_user_scan, s.last_user_lookup, s.last_user_seek
FROM sys.dm_db_index_usage_stats AS s WITH (NOLOCK)
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON s.[object_id] = i.[object_id]
WHERE OBJECTPROPERTY(s.[object_id],'IsUserTable') = 1
AND i.index_id = s.index_id
AND s.database_id = DB_ID()
ORDER BY user_seeks + user_scans + user_lookups DESC OPTION (RECOMPILE); -- Order by reads
------


-- Show which indexes in the current database are most active for Reads


--- Index Read/Write stats (all tables in current DB) ordered by Writes  (Query 62) (Overall Index Usage - Writes)
SELECT OBJECT_NAME(s.[object_id]) AS [ObjectName], i.name AS [IndexName], i.index_id,
	   s.user_updates AS [Writes], user_seeks + user_scans + user_lookups AS [Reads], 
	   i.type_desc AS [IndexType], i.fill_factor AS [FillFactor], i.has_filter, i.filter_definition,
	   s.last_system_update, s.last_user_update
FROM sys.dm_db_index_usage_stats AS s WITH (NOLOCK)
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON s.[object_id] = i.[object_id]
WHERE OBJECTPROPERTY(s.[object_id],'IsUserTable') = 1
AND i.index_id = s.index_id
AND s.database_id = DB_ID()
ORDER BY s.user_updates DESC OPTION (RECOMPILE);						 -- Order by writes
------

-- Show which indexes in the current database are most active for Writes


-- Get lock waits for current database (Query 63) (Lock Waits)
SELECT o.name AS [table_name], i.name AS [index_name], ios.index_id, ios.partition_number,
		SUM(ios.row_lock_wait_count) AS [total_row_lock_waits], 
		SUM(ios.row_lock_wait_in_ms) AS [total_row_lock_wait_in_ms],
		SUM(ios.page_lock_wait_count) AS [total_page_lock_waits],
		SUM(ios.page_lock_wait_in_ms) AS [total_page_lock_wait_in_ms],
		SUM(ios.page_lock_wait_in_ms)+ SUM(row_lock_wait_in_ms) AS [total_lock_wait_in_ms]
FROM sys.dm_db_index_operational_stats(DB_ID(), NULL, NULL, NULL) AS ios
INNER JOIN sys.objects AS o WITH (NOLOCK)
ON ios.[object_id] = o.[object_id]
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON ios.[object_id] = i.[object_id] 
AND ios.index_id = i.index_id
WHERE o.[object_id] > 100
GROUP BY o.name, i.name, ios.index_id, ios.partition_number
HAVING SUM(ios.page_lock_wait_in_ms)+ SUM(row_lock_wait_in_ms) > 0
ORDER BY total_lock_wait_in_ms DESC OPTION (RECOMPILE);
------

-- This query is helpful for troubleshooting blocking and deadlocking issues


-- Look at recent Full backups for the current database (Query 64) (Recent Full Backups)
SELECT TOP (30) bs.machine_name, bs.server_name, bs.database_name AS [Database Name], bs.recovery_model,
CONVERT (BIGINT, bs.backup_size / 1048576 ) AS [Uncompressed Backup Size (MB)],
CONVERT (BIGINT, bs.compressed_backup_size / 1048576 ) AS [Compressed Backup Size (MB)],
CONVERT (NUMERIC (20,2), (CONVERT (FLOAT, bs.backup_size) /
CONVERT (FLOAT, bs.compressed_backup_size))) AS [Compression Ratio], bs.has_backup_checksums, bs.is_copy_only,
DATEDIFF (SECOND, bs.backup_start_date, bs.backup_finish_date) AS [Backup Elapsed Time (sec)],
bs.backup_finish_date AS [Backup Finish Date], bmf.physical_device_name AS [Backup Location], bmf.physical_block_size
FROM msdb.dbo.backupset AS bs WITH (NOLOCK)
INNER JOIN msdb.dbo.backupmediafamily AS bmf WITH (NOLOCK)
ON bs.media_set_id = bmf.media_set_id  
WHERE DATEDIFF (SECOND, bs.backup_start_date, bs.backup_finish_date) > 0 
AND bs.backup_size > 0
AND bs.type = 'D' -- Change to L if you want Log backups
AND database_name = DB_NAME(DB_ID())
ORDER BY bs.backup_finish_date DESC OPTION (RECOMPILE);
------

-- Are your backup sizes and times changing over time?
-- Are you using backup checksums?
-- Are you doing copy_only backups?
-- Have you done any backup tuning with striped backups, or changing the parameters of the backup command?


-- These three Pluralsight Courses go into more detail about how to run these queries and interpret the results

-- SQL Server 2014 DMV Diagnostic Queries � Part 1 
-- https://bit.ly/2plxCer

-- SQL Server 2014 DMV Diagnostic Queries � Part 2
-- https://bit.ly/2IuJpzI

-- SQL Server 2014 DMV Diagnostic Queries � Part 3
-- https://bit.ly/2FIlCPb



-- Sign up for Microsoft Visual Studio Dev Essentials and get a free three month pass to Pluralsight

-- Microsoft Visual Studio Dev Essentials
-- http://bit.ly/1q6xbDL


-- Sign up for Microsoft Azure Essentials and get lots of free Azure usage credits, MCP exam voucher, three month Pluralsight subscription

-- Microsoft Azure Essentials
-- https://bit.ly/2JMWe8x


-- August 2017 blog series about upgrading and migrating SQL Server
-- https://bit.ly/2ftKVrX

tools\dbatools\bin\smo\Microsoft.SqlServer.Management.XEventEnum.dll

md5: 57BD65925D90B9ACD8234CA0785F4656 | sha1: 74A4919CD3A1099F00FB989F0AD93F9124C42C41 | sha256: 68562C7EA2F0070C8B81A15653F8950C4A2BE8CDE8D829BF2A2DDF4288B748FF | sha512: 2EEDDE3CF5700571A072F11C7DC6824549333EFAFDE684F511B0517595149088287706EB2C9B74D58C937721C19AF1AF49E8CBB92E1100F3ADD938C5322C591C

tools\dbatools\bin\smo\Microsoft.SqlServer.OlapEnum.dll

md5: 0B480897CB1E688BCAD14B4905BDD4F0 | sha1: 24EE4CBA735262D79FBB9B7AAECF9E288ED3EF14 | sha256: 969BD6F5B1C5D559782F8E87CBDD2C627CF639CF595BDDF4B559000D656328DB | sha512: 8D363FAF072519B8E9DDEA38462A8F12400D4025B0D6928B50718D315F8C7799B6CAC3E4CD421F184F5434ACEE4B83BA6ADED993965C53A69382887351C9B129

tools\dbatools\bin\smo\Microsoft.SqlServer.PolicyEnum.dll

md5: 581FB98877A22BA2A7EA3DF6B7130282 | sha1: 2F63F652416B40222FA444CF8E91405BBA26BA3B | sha256: 3A311FBBC53F5168E6E5030F7CF446A1E096B4F00A01590C8E369BCFCC5F1E19 | sha512: 2736E9F00D491382B87A4E79B04A49C41B203D8B82D74FEDE75026FAEC31A43CCBC9E07300F19E14A057A456CCE03DCE1CCA2FA651D4A6CABF7E257247115159

tools\dbatools\bin\smo\Microsoft.SqlServer.RegSvrEnum.dll

md5: 5890D898EDE91AAE18FE5A7A610DFEFC | sha1: 6E2504763E14B59FC847124DADCEC942C03B9247 | sha256: 997A08FBB4F698562CC497A061D23B60BE2B2889F4CBD3E74EC745C9C820D53E | sha512: 3614A66B9A6AE2CD21C7E4070CBF53AB1EEABF747EBE66E28E0CC0B6AD1A9B108179BBB3C09637F05B5B95CC39ED17FA721425A967B452AF030352EB91B55AC2

tools\dbatools\bin\smo\Microsoft.SqlServer.ReplEnum.dll

md5: 7D7BE01C1C2EBB973ABA33F7587FE04E | sha1: 2EE9CD9A998450729D79DD3A570948F61886510A | sha256: FA54A93E59A7FDEF47189A89B5B44ED466F1EEC092C3668A3FCEDB1975EF30A7 | sha512: 61CBA8EF9B02F457F6B057BB76BE697D05E8265EA2C10C020EF26EB31F603CB763A3550A71EFAE186CBB7376E3FE8802B1B1A797B666A4735A01395806BFB6D5

tools\dbatools\bin\smo\Microsoft.SqlServer.Replication.BusinessLogicSupport.dll

md5: CC304F5AA02D499866C037FE08EA24B0 | sha1: 21803E2AAE89A4F74E10453881A361F9DC59A8AA | sha256: DDE7397FDEB22206308931F6DA0DD2FE0E93F8AF97C1842C4D8B1688EBC7632E | sha512: FE21E3E0A37F1BC47A8F434005ED94DD6A94341D6099E4F288E6A1F78CADC98A7624564094C62022F6F80370C8C647D8F663A8DEC515300708C69326D0F24F79

tools\dbatools\bin\smo\Microsoft.SqlServer.Replication.dll

md5: 4E575BC1534DD45D1F32069A29D261CA | sha1: 34CC055999FC47534C70DE709037A7B7CD54D04E | sha256: 10F625817467AC23F55489CF84DA1C060859219BDD6B75B77A2CDD00F16509C4 | sha512: 6D06896FD901BAA6FFC066C8DEF634FA5214C0A222B9C2E534FCBC522EA82A44F2099B0872F93C2740AD7511CF02CD7B2AAADAADF6265FB5EAA4F1F50C4F9FB6

tools\dbatools\bin\smo\Microsoft.SqlServer.Rmo.dll

md5: 56A459CAB89BF18CD183490CE1BB7909 | sha1: E90C37447D7EA4EFAEEA58ABE3307CA97249213C | sha256: C16BE1791F423EE813AAC7E17E611A8A783FF2BA9B2BA12ED1A2992D5DC943FA | sha512: A9AA3F818D07E6D0F97B80FCAC994C7E50BDA286F489A7D20785C8A982B20E9088F9A38B3AF0D8B22D04449679704D887F3EF8B8986EF4CFADC0ACF99197BB97

tools\dbatools\bin\smo\Microsoft.SqlServer.ServiceBrokerEnum.dll

md5: CA09568CB5870FE4A7A431C726EF7894 | sha1: 72B0477EE1C843ADE4DADD0836636DA3C3A188BA | sha256: 7DE4C88949F8FAAE9AE8A9F6E494196FD4429DAD42F5E6269E9074FD70273F2F | sha512: D9FCFD3C67ADF76F1E9ED32EFFDE301BE99F8EAEDC38C11552772B097EE2EB94E8F92862184678A64EB6BD5BFC81B079B4F7BF44E6037E853EADA98ADB43F243

tools\dbatools\bin\diagnosticquery\SQLServerDiagnosticQueries_2005_201810.sql


-- SQL Server 2005 Diagnostic Information Queries
-- Glenn Berry 
-- Last Modified: July 5, 2018
-- https://www.sqlserverperformance.wordpress.com/
-- https://www.sqlskills.com/blogs/glenn/
-- Twitter: GlennAlanBerry

-- Please listen to my Pluralsight courses
-- https://www.pluralsight.com/author/glenn-berry

-- If you want to find all of our SQLskills SQL101 blog posts, check out https://www.sqlskills.com/help/sql101/

-- Many of these queries will not work if you have databases in 80 compatibility mode
-- Please make sure you are using the correct version of these diagnostic queries for your version of SQL Server

--******************************************************************************
--*   Copyright (C) 2018 Glenn Berry, SQLskills.com
--*   All rights reserved. 
--*
--*   For more scripts and sample code, check out 
--*      https://www.sqlskills.com/blogs/glenn
--*
--*   You may alter this code for your own *non-commercial* purposes. You may
--*   republish altered code as long as you include this copyright and give due credit. 
--*
--*
--*   THIS CODE AND INFORMATION ARE PROVIDED "AS IS" WITHOUT WARRANTY OF 
--*   ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED 
--*   TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A
--*   PARTICULAR PURPOSE. 
--*
--******************************************************************************

-- Check the major product version to see if it is SQL Server 2005
IF NOT EXISTS (SELECT * WHERE CONVERT(varchar(128), SERVERPROPERTY('ProductVersion')) LIKE '9%')
	BEGIN
		DECLARE @ProductVersion varchar(128); 
		SET @ProductVersion = CONVERT(varchar(128), SERVERPROPERTY('ProductVersion'));
		RAISERROR ('Script does not match the ProductVersion [%s] of this instance. Many of these queries may not work on this version.' , 18 , 16 , @ProductVersion);
	END
	ELSE
		PRINT N'You have the correct major version of SQL Server for this diagnostic information script';


-- SQL Version information for current instance  (Query 1) (Version Info)
SELECT @@SERVERNAME AS [Server Name], @@VERSION AS [SQL Server and OS Version Info];
------

-- SQL Server 2005 is out of both mainstream and extended support from Microsoft
-- Build 9.0.5266 was the last cumulative update


--   SQL 2005 SP2 Builds             SQL 2005 SP3 Builds            SQL 2005 SP4 Builds
-- Build          Description         Build         Description     Build		   Description
-- 9.0.3042        SP2 RTM			  9.0.4035        SP3 RTM
-- 9.0.3161        SP2 CU1			  9.0.4207        SP3 CU1
-- 9.0.3175        SP2 CU2			  9.0.4211        SP3 CU2 
-- 9.0.3186        SP2 CU3			  9.0.4220       SP3 CU3         
-- 9.0.3200        SP2 CU4			  9.0.4226        SP3 CU4         
-- 9.0.3215        SP2 CU5			  9.0.4230		  SP3 CU5          
-- 9.0.3228		   SP2 CU6			  9.0.4266        SP3 CU6        
-- 9.0.3239        SP2 CU7			  9.0.4273		  SP3 CU7        
-- 9.0.3257        SP2 CU8			  9.0.4285        SP3 CU8
-- 9.0.3282        SP2 CU9			  9.0.4294		  SP3 CU9
-- 9.0.3294		   SP2 CU10			  9.0.4305        SP3 CU10
-- 9.0.3301		   SP2 CU11			  9.0.4309		  SP3 CU11  ---> 9.0.5000		SP4 RTM
-- 9.0.3315        SP2 CU12           9.0.4311        SP3 CU12  ---> 9.0.5254       SP4 CU1		12/22/2010
-- 9.0.3325		   SP2 CU13			  9.0.4315		  SP3 CU13
-- 9.0.3328        SP2 CU14			  9.0.4317		  SP3 CU14	---> 9.0.5259		SP4 CU2		 2/21/2011
-- 9.0.3330        SP2 CU15			  9.0.4325		  SP3 CU15	---> 9.0.5266		SP4 CU3      3/21/2011
-- 9.0.3355        SP2 CU16
-- 9.0.3356		   SP2 CU17



-- The SQL Server 2005 builds that were released after SQL Server 2005 Service Pack 2 was released
-- http://support.microsoft.com/kb/937137

-- The SQL Server 2005 builds that were released after SQL Server 2005 Service Pack 3 was released
-- http://support.microsoft.com/kb/960598

-- The SQL Server 2005 builds that were released after SQL Server 2005 Service Pack 4 was released 
-- http://support.microsoft.com/kb/2485757

-- SQL Server 2005 fell out of Mainsteam Support on April 12, 2011
-- This means no more Service Packs or Cumulative Updates
-- SQL Server 2005 ended Extended Support on April 12, 2016 

-- SQL Server 2005 Service Pack 4
-- http://www.microsoft.com/en-us/download/details.aspx?id=7218



-- When was SQL Server installed  (Query 2) (SQL Server Install Date)  
SELECT @@SERVERNAME AS [Server Name], create_date AS [SQL Server Install Date] 
FROM sys.server_principals WITH (NOLOCK)
WHERE name = N'NT AUTHORITY\SYSTEM'
OR name = N'NT AUTHORITY\NETWORK SERVICE' OPTION (RECOMPILE);
------

-- Tells you the date and time that SQL Server was installed
-- It is a good idea to know how old your instance is



-- Get selected server properties (Query 3) (Server Properties)
SELECT SERVERPROPERTY('MachineName') AS [MachineName], SERVERPROPERTY('ServerName') AS [ServerName],  
SERVERPROPERTY('InstanceName') AS [Instance], SERVERPROPERTY('IsClustered') AS [IsClustered], 
SERVERPROPERTY('ComputerNamePhysicalNetBIOS') AS [ComputerNamePhysicalNetBIOS], 
SERVERPROPERTY('Edition') AS [Edition], SERVERPROPERTY('ProductLevel') AS [ProductLevel], 
SERVERPROPERTY('ProductVersion') AS [ProductVersion], SERVERPROPERTY('ProcessID') AS [ProcessID],
SERVERPROPERTY('Collation') AS [Collation], SERVERPROPERTY('IsFullTextInstalled') AS [IsFullTextInstalled], 
SERVERPROPERTY('IsIntegratedSecurityOnly') AS [IsIntegratedSecurityOnly];
------

-- This gives you a lot of useful information about your instance of SQL Server,
-- such as the ProcessID for SQL Server and your collation


-- Get SQL Server Agent jobs and Category information (Query 4) (SQL Server Agent Jobs)
SELECT sj.name AS [Job Name], sj.[description] AS [Job Description], SUSER_SNAME(sj.owner_sid) AS [Job Owner],
sj.date_created AS [Date Created], sj.[enabled] AS [Job Enabled], 
sj.notify_email_operator_id, sj.notify_level_email, sc.name AS [CategoryName],
s.[enabled] AS [Sched Enabled], js.next_run_date, js.next_run_time
FROM msdb.dbo.sysjobs AS sj WITH (NOLOCK)
INNER JOIN msdb.dbo.syscategories AS sc WITH (NOLOCK)
ON sj.category_id = sc.category_id
LEFT OUTER JOIN msdb.dbo.sysjobschedules AS js WITH (NOLOCK)
ON sj.job_id = js.job_id
LEFT OUTER JOIN msdb.dbo.sysschedules AS s WITH (NOLOCK)
ON js.schedule_id = s.schedule_id
ORDER BY sj.name OPTION (RECOMPILE);
------

-- Gives you some basic information about your SQL Server Agent jobs, who owns them and how they are configured
-- Look for Agent jobs that are not owned by sa
-- Look for jobs that have a notify_email_operator_id set to 0 (meaning no operator)
-- Look for jobs that have a notify_level_email set to 0 (meaning no e-mail is ever sent)
--
-- MSDN sysjobs documentation
-- http://msdn.microsoft.com/en-us/library/ms189817.aspx


-- Get SQL Server Agent Alert Information (Query 5) (SQL Server Agent Alerts)
SELECT name, event_source, message_id, severity, [enabled], has_notification, 
       delay_between_responses, occurrence_count, last_occurrence_date, last_occurrence_time
FROM msdb.dbo.sysalerts WITH (NOLOCK)
ORDER BY name OPTION (RECOMPILE);
------

-- Gives you some basic information about your SQL Server Agent Alerts (which are different from SQL Server Agent jobs)
-- Read more about Agent Alerts here: https://www.sqlskills.com/blogs/glenn/creating-sql-server-agent-alerts-for-critical-errors/


-- Returns a list of all global trace flags that are enabled (Query 6) (Global Trace Flags)
DBCC TRACESTATUS (-1);
------
 
-- If no global trace flags are enabled, no results will be returned.
-- It is very useful to know what global trace flags are currently enabled as part of the diagnostic process.

-- Common trace flags that should be enabled in most cases
-- TF 1117 - When growing a data file, grow all files at the same time so they remain the same size, reducing allocation contention points
--           http://support2.microsoft.com/kb/2154845
-- 
-- TF 1118 - Helps alleviate allocation contention in tempdb, SQL Server allocates full extents to each database object, 
--           thereby eliminating the contention on SGAM pages (more important with older versions of SQL Server)
--           Recommendations to reduce allocation contention in SQL Server tempdb database
--           http://support2.microsoft.com/kb/2154845

-- TF 3226 - Supresses logging of successful database backup messages to the SQL Server Error Log
--           https://www.sqlskills.com/blogs/paul/fed-up-with-backup-success-messages-bloating-your-error-logs/


-- Hardware Information from SQL Server 2005  (Query 7) (Hardware Info)
-- (Cannot distinguish between HT and multi-core)
SELECT cpu_count AS [Logical CPU Count], hyperthread_ratio AS [Hyperthread Ratio],
cpu_count/hyperthread_ratio AS [Physical CPU Count], 
physical_memory_in_bytes/1048576 AS [Physical Memory (MB)]
FROM sys.dm_os_sys_info WITH (NOLOCK) OPTION (RECOMPILE);
------

-- Gives you some good basic hardware information about your database server


-- Get System Manufacturer and model number from (Query 8) (System Manufacturer)
-- SQL Server Error log. This query might take a few seconds 
-- if you have not recycled your error log recently  
EXEC sys.xp_readerrorlog 0, 1, N'Manufacturer';
------  

-- This can help you determine the capabilities
-- and capacities of your database server
-- This often comes back with no results on SQL Server 2005


-- Get processor description from Windows Registry  (Query 9) (Processor Description)
EXEC sys.xp_instance_regread N'HKEY_LOCAL_MACHINE', N'HARDWARE\DESCRIPTION\System\CentralProcessor\0', N'ProcessorNameString';
------

-- Gives you the model number and rated clock speed of your processor(s)
-- Your processors may be running at less that the rated clock speed due
-- to the Windows Power Plan or hardware power management

-- You can use CPU-Z to get your actual CPU core speed and a lot of other useful information
-- http://www.cpuid.com/softwares/cpu-z.html

-- You can learn more about processor selection for SQL Server by following this link
-- https://www.sqlskills.com/blogs/glenn/processor-selection-for-sql-server/



-- Get configuration values for instance  (Query 10) (Configuration Values)
SELECT name, value, value_in_use, minimum, maximum, [description], is_dynamic, is_advanced
FROM sys.configurations WITH (NOLOCK)
ORDER BY name OPTION (RECOMPILE);
------

-- Focus on these settings:)
-- backup compression default (should be 1 in most cases)
-- clr enabled (only enable if it is needed)
-- cost threshold for parallelism (depends on your workload)
-- lightweight pooling (should be zero)
-- max degree of parallelism (depends on your workload)
-- max server memory (MB) (set to an appropriate value, not the default)
-- priority boost (should be zero)
-- remote admin connections (should be 1)


-- File names and paths for all user and system databases on instance  (Query 11) (Database Filenames and Paths)
SELECT DB_NAME([database_id]) AS [Database Name], 
       [file_id], [name], physical_name, [type_desc], state_desc,
	   is_percent_growth, growth,
	   CONVERT(bigint, growth/128.0) AS [Growth in MB], 
       CONVERT(bigint, size/128.0) AS [Total Size in MB]
FROM sys.master_files WITH (NOLOCK)
ORDER BY DB_NAME([database_id]), [file_id] OPTION (RECOMPILE);
------

-- Things to look at:
-- Are data files and log files on different drives?
-- Is everything on the C: drive?
-- Is TempDB on dedicated drives?
-- Is there only one TempDB data file?
-- Are all of the TempDB data files the same size?
-- Are there multiple data files for user databases?
-- Is percent growth enabled for any files (which is bad)?


-- Look for I/O requests taking longer than 15 seconds in the five most recent SQL Server Error Logs (Query 12) (IO Warnings)
CREATE TABLE #IOWarningResults(LogDate datetime, ProcessInfo sysname, LogText nvarchar(1000));

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 0, 1, N'taking longer than 15 seconds';

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 1, 1, N'taking longer than 15 seconds';

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 2, 1, N'taking longer than 15 seconds';

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 3, 1, N'taking longer than 15 seconds';

	INSERT INTO #IOWarningResults 
	EXEC xp_readerrorlog 4, 1, N'taking longer than 15 seconds';

SELECT LogDate, ProcessInfo, LogText
FROM #IOWarningResults
ORDER BY LogDate DESC;

DROP TABLE #IOWarningResults; 
------ 

-- Finding 15 second I/O warnings in the SQL Server Error Log is useful evidence of
-- poor I/O performance (which might have many different causes)
-- Look to see if you see any patterns in the results (same files, same drives, same time of day, etc.)

-- Diagnostics in SQL Server help detect stalled and stuck I/O operations
-- https://support.microsoft.com/en-us/kb/897284


-- Drive level latency information (Query 13) (Drive Level Latency)
-- Based on code from Jimmy May
SELECT tab.[Drive], tab.volume_mount_point AS [Volume Mount Point], 
	CASE 
		WHEN num_of_reads = 0 THEN 0 
		ELSE (io_stall_read_ms/num_of_reads) 
	END AS [Read Latency],
	CASE 
		WHEN num_of_writes = 0 THEN 0 
		ELSE (io_stall_write_ms/num_of_writes) 
	END AS [Write Latency],
	CASE 
		WHEN (num_of_reads = 0 AND num_of_writes = 0) THEN 0 
		ELSE (io_stall/(num_of_reads + num_of_writes)) 
	END AS [Overall Latency],
	CASE 
		WHEN num_of_reads = 0 THEN 0 
		ELSE (num_of_bytes_read/num_of_reads) 
	END AS [Avg Bytes/Read],
	CASE 
		WHEN num_of_writes = 0 THEN 0 
		ELSE (num_of_bytes_written/num_of_writes) 
	END AS [Avg Bytes/Write],
	CASE 
		WHEN (num_of_reads = 0 AND num_of_writes = 0) THEN 0 
		ELSE ((num_of_bytes_read + num_of_bytes_written)/(num_of_reads + num_of_writes)) 
	END AS [Avg Bytes/Transfer]
FROM (SELECT LEFT(UPPER(mf.physical_name), 2) AS Drive, SUM(num_of_reads) AS num_of_reads,
	         SUM(io_stall_read_ms) AS io_stall_read_ms, SUM(num_of_writes) AS num_of_writes,
	         SUM(io_stall_write_ms) AS io_stall_write_ms, SUM(num_of_bytes_read) AS num_of_bytes_read,
	         SUM(num_of_bytes_written) AS num_of_bytes_written, SUM(io_stall) AS io_stall, vs.volume_mount_point 
      FROM sys.dm_io_virtual_file_stats(NULL, NULL) AS vfs
      INNER JOIN sys.master_files AS mf WITH (NOLOCK)
      ON vfs.database_id = mf.database_id AND vfs.file_id = mf.file_id
	  CROSS APPLY sys.dm_os_volume_stats(mf.database_id, mf.[file_id]) AS vs 
      GROUP BY LEFT(UPPER(mf.physical_name), 2), vs.volume_mount_point) AS tab
ORDER BY [Overall Latency] OPTION (RECOMPILE);
------

-- Shows you the drive-level latency for reads and writes, in milliseconds
-- Latency above 20-25ms is usually a problem


-- Calculates average stalls per read, per write, and per total input/output for each database file  (Query 14) (IO Stalls by File)
SELECT DB_NAME(fs.database_id) AS [Database Name], CAST(fs.io_stall_read_ms/(1.0 + fs.num_of_reads) AS NUMERIC(10,1)) AS [avg_read_stall_ms],
CAST(fs.io_stall_write_ms/(1.0 + fs.num_of_writes) AS NUMERIC(10,1)) AS [avg_write_stall_ms],
CAST((fs.io_stall_read_ms + fs.io_stall_write_ms)/(1.0 + fs.num_of_reads + fs.num_of_writes) AS NUMERIC(10,1)) AS [avg_io_stall_ms],
CONVERT(DECIMAL(18,2), mf.size/128.0) AS [File Size (MB)], mf.physical_name, mf.type_desc, fs.io_stall_read_ms, fs.num_of_reads, 
fs.io_stall_write_ms, fs.num_of_writes, fs.io_stall_read_ms + fs.io_stall_write_ms AS [io_stalls], fs.num_of_reads + fs.num_of_writes AS [total_io]
FROM sys.dm_io_virtual_file_stats(null,null) AS fs
INNER JOIN sys.master_files AS mf WITH (NOLOCK)
ON fs.database_id = mf.database_id
AND fs.[file_id] = mf.[file_id]
ORDER BY avg_io_stall_ms DESC OPTION (RECOMPILE);
------

-- Helps determine which database files on the entire instance have the most I/O bottlenecks
-- This can help you decide whether certain LUNs are overloaded and whether you might
-- want to move some files to a different location or perhaps improve your I/O performance


-- Recovery model, log reuse wait description, log file size, log usage size (Query 15) (Database Properties)
-- and compatibility level for all databases on instance
SELECT db.[name] AS [Database Name], SUSER_SNAME(db.owner_sid) AS [Database Owner], db.recovery_model_desc AS [Recovery Model], 
db.log_reuse_wait_desc AS [Log Reuse Wait Description], 
ls.cntr_value AS [Log Size (KB)], lu.cntr_value AS [Log Used (KB)],
CAST(CAST(lu.cntr_value AS FLOAT) / CAST(ls.cntr_value AS FLOAT)AS DECIMAL(18,2)) * 100 AS [Log Used %], 
db.[compatibility_level] AS [DB Compatibility Level], 
db.page_verify_option_desc AS [Page Verify Option], db.is_auto_create_stats_on, db.is_auto_update_stats_on,
db.is_auto_update_stats_async_on, db.is_parameterization_forced, 
db.snapshot_isolation_state_desc, db.is_read_committed_snapshot_on,
db.is_auto_close_on, db.is_auto_shrink_on, db.is_published
FROM sys.databases AS db WITH (NOLOCK)
INNER JOIN sys.dm_os_performance_counters AS lu WITH (NOLOCK)
ON db.name = lu.instance_name
INNER JOIN sys.dm_os_performance_counters AS ls WITH (NOLOCK)
ON db.name = ls.instance_name
WHERE lu.counter_name LIKE N'Log File(s) Used Size (KB)%' 
AND ls.counter_name LIKE N'Log File(s) Size (KB)%'
AND ls.cntr_value > 0 OPTION (RECOMPILE);
------

-- Things to look at:
-- How many databases are on the instance?
-- What recovery models are they using?
-- What is the log reuse wait description?
-- How full are the transaction logs ?
-- What compatibility level are the databases on? 
-- What is the Page Verify Option? (should be CHECKSUM)
-- Is Auto Update Statistics Asynchronously enabled?
-- Make sure auto_shrink and auto_close are not enabled!



-- Missing Indexes for all databases by Index Advantage  (Query 16) (Missing Indexes All Databases)
SELECT CONVERT(decimal(18,2), user_seeks * avg_total_user_cost * (avg_user_impact * 0.01)) AS [index_advantage], 
migs.last_user_seek, mid.[statement] AS [Database.Schema.Table],
mid.equality_columns, mid.inequality_columns, mid.included_columns,
migs.unique_compiles, migs.user_seeks, migs.avg_total_user_cost, migs.avg_user_impact
FROM sys.dm_db_missing_index_group_stats AS migs WITH (NOLOCK)
INNER JOIN sys.dm_db_missing_index_groups AS mig WITH (NOLOCK)
ON migs.group_handle = mig.index_group_handle
INNER JOIN sys.dm_db_missing_index_details AS mid WITH (NOLOCK)
ON mig.index_handle = mid.index_handle
ORDER BY index_advantage DESC OPTION (RECOMPILE);
------

-- Getting missing index information for all of the databases on the instance is very useful
-- Look at last user seek time, number of user seeks to help determine source and importance
-- Also look at avg_user_impact and avg_total_user_cost to help determine importance
-- SQL Server is overly eager to add included columns, so beware
-- Do not just blindly add indexes that show up from this query!!!



-- Get VLF Counts for all databases on the instance (Query 17) (VLF Counts)
-- (adapted from Michelle Ufford) 
CREATE TABLE #VLFInfo (FileID  int,
					   FileSize bigint, StartOffset bigint,
					   FSeqNo      bigint, [Status]    bigint,
					   Parity      bigint, CreateLSN   numeric(38));
	 
CREATE TABLE #VLFCountResults(DatabaseName sysname, VLFCount int);
	 
EXEC sp_MSforeachdb N'Use [?]; 

				INSERT INTO #VLFInfo 
				EXEC sp_executesql N''DBCC LOGINFO([?])''; 
	 
				INSERT INTO #VLFCountResults 
				SELECT DB_NAME(), COUNT(*) 
				FROM #VLFInfo; 

				TRUNCATE TABLE #VLFInfo;'
	 
SELECT DatabaseName, VLFCount  
FROM #VLFCountResults
ORDER BY VLFCount DESC;
	 
DROP TABLE #VLFInfo;
DROP TABLE #VLFCountResults;
------

-- High VLF counts can affect write performance 
-- and they can make full database restores and crash recovery take much longer
-- Try to keep your VLF counts under 200 in most cases



-- Get CPU utilization by database (Query 18) (CPU Usage by Database)
WITH DB_CPU_Stats
AS
(SELECT pa.DatabaseID, DB_Name(pa.DatabaseID) AS [Database Name], SUM(qs.total_worker_time/1000) AS [CPU_Time_Ms]
 FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
 CROSS APPLY (SELECT CONVERT(int, value) AS [DatabaseID] 
              FROM sys.dm_exec_plan_attributes(qs.plan_handle)
              WHERE attribute = N'dbid') AS pa
 GROUP BY DatabaseID)
SELECT ROW_NUMBER() OVER(ORDER BY [CPU_Time_Ms] DESC) AS [CPU Rank],
       [Database Name], [CPU_Time_Ms] AS [CPU Time (ms)], 
       CAST([CPU_Time_Ms] * 1.0 / SUM([CPU_Time_Ms]) OVER() * 100.0 AS DECIMAL(5, 2)) AS [CPU Percent]
FROM DB_CPU_Stats
WHERE DatabaseID <> 32767 -- ResourceDB
ORDER BY [CPU Rank] OPTION (RECOMPILE);
------

-- Helps determine which database is using the most CPU resources on the instance


-- Get I/O utilization by database (Query 19) (IO Usage By Database)
WITH Aggregate_IO_Statistics
AS
(SELECT DB_NAME(database_id) AS [Database Name],
CAST(SUM(num_of_bytes_read + num_of_bytes_written)/1048576 AS DECIMAL(12, 2)) AS io_in_mb
FROM sys.dm_io_virtual_file_stats(NULL, NULL) AS [DM_IO_STATS]
GROUP BY database_id)
SELECT ROW_NUMBER() OVER(ORDER BY io_in_mb DESC) AS [I/O Rank], [Database Name], io_in_mb AS [Total I/O (MB)],
       CAST(io_in_mb/ SUM(io_in_mb) OVER() * 100.0 AS DECIMAL(5,2)) AS [I/O Percent]
FROM Aggregate_IO_Statistics
ORDER BY [I/O Rank] OPTION (RECOMPILE);
------

-- Helps determine which database is using the most I/O resources on the instance


-- Get total buffer usage by database for current instance (Query 20) (Total Buffer Usage by Database)
-- This make take some time to run on a busy instance
WITH AggregateBufferPoolUsage
AS
(SELECT DB_NAME(database_id) AS [Database Name],
CAST(COUNT(*) * 8/1024.0 AS DECIMAL (10,2))  AS [CachedSize]
FROM sys.dm_os_buffer_descriptors WITH (NOLOCK)
WHERE database_id <> 32767 -- ResourceDB
GROUP BY DB_NAME(database_id))
SELECT ROW_NUMBER() OVER(ORDER BY CachedSize DESC) AS [Buffer Pool Rank], [Database Name], CachedSize AS [Cached Size (MB)],
       CAST(CachedSize / SUM(CachedSize) OVER() * 100.0 AS DECIMAL(5,2)) AS [Buffer Pool Percent]
FROM AggregateBufferPoolUsage
ORDER BY [Buffer Pool Rank] OPTION (RECOMPILE);
------

-- Tells you how much memory (in the buffer pool) 
-- is being used by each database on the instance


-- Clear Wait Stats with this command
-- DBCC SQLPERF('sys.dm_os_wait_stats', CLEAR);

-- Isolate top waits for server instance since last restart or wait statistics clear (Query 21) (Top Waits)
WITH [Waits] 
AS (SELECT wait_type, wait_time_ms/ 1000.0 AS [WaitS],
          (wait_time_ms - signal_wait_time_ms) / 1000.0 AS [ResourceS],
           signal_wait_time_ms / 1000.0 AS [SignalS],
           waiting_tasks_count AS [WaitCount],
           100.0 *  wait_time_ms / SUM (wait_time_ms) OVER() AS [Percentage],
           ROW_NUMBER() OVER(ORDER BY wait_time_ms DESC) AS [RowNum]
    FROM sys.dm_os_wait_stats WITH (NOLOCK)
    WHERE [wait_type] NOT IN (
        N'BROKER_EVENTHANDLER', N'BROKER_RECEIVE_WAITFOR', N'BROKER_TASK_STOP',
		N'BROKER_TO_FLUSH', N'BROKER_TRANSMITTER', N'CHECKPOINT_QUEUE',
        N'CHKPT', N'CLR_AUTO_EVENT', N'CLR_MANUAL_EVENT', N'CLR_SEMAPHORE',
        N'DBMIRROR_DBM_EVENT', N'DBMIRROR_EVENTS_QUEUE', N'DBMIRROR_WORKER_QUEUE',
		N'DBMIRRORING_CMD', N'DIRTY_PAGE_POLL', N'DISPATCHER_QUEUE_SEMAPHORE',
        N'EXECSYNC', N'FSAGENT', N'FT_IFTS_SCHEDULER_IDLE_WAIT', N'FT_IFTSHC_MUTEX',
        N'HADR_CLUSAPI_CALL', N'HADR_FILESTREAM_IOMGR_IOCOMPLETION', N'HADR_LOGCAPTURE_WAIT', 
		N'HADR_NOTIFICATION_DEQUEUE', N'HADR_TIMER_TASK', N'HADR_WORK_QUEUE',
        N'KSOURCE_WAKEUP', N'LAZYWRITER_SLEEP', N'LOGMGR_QUEUE', N'ONDEMAND_TASK_QUEUE',
        N'PWAIT_ALL_COMPONENTS_INITIALIZED', N'QDS_PERSIST_TASK_MAIN_LOOP_SLEEP',
        N'QDS_CLEANUP_STALE_QUERIES_TASK_MAIN_LOOP_SLEEP', N'REQUEST_FOR_DEADLOCK_SEARCH',
		N'RESOURCE_QUEUE', N'SERVER_IDLE_CHECK', N'SLEEP_BPOOL_FLUSH', N'SLEEP_DBSTARTUP',
		N'SLEEP_DCOMSTARTUP', N'SLEEP_MASTERDBREADY', N'SLEEP_MASTERMDREADY',
        N'SLEEP_MASTERUPGRADED', N'SLEEP_MSDBSTARTUP', N'SLEEP_SYSTEMTASK', N'SLEEP_TASK',
        N'SLEEP_TEMPDBSTARTUP', N'SNI_HTTP_ACCEPT', N'SP_SERVER_DIAGNOSTICS_SLEEP',
		N'SQLTRACE_BUFFER_FLUSH', N'SQLTRACE_INCREMENTAL_FLUSH_SLEEP', N'SQLTRACE_WAIT_ENTRIES',
		N'WAIT_FOR_RESULTS', N'WAITFOR', N'WAITFOR_TASKSHUTDOWN', N'WAIT_XTP_HOST_WAIT',
		N'WAIT_XTP_OFFLINE_CKPT_NEW_LOG', N'WAIT_XTP_CKPT_CLOSE', N'XE_DISPATCHER_JOIN',
        N'XE_DISPATCHER_WAIT', N'XE_TIMER_EVENT')
    AND waiting_tasks_count > 0)
SELECT
    MAX (W1.wait_type) AS [WaitType],
	CAST (MAX (W1.Percentage) AS DECIMAL (5,2)) AS [Wait Percentage],
	CAST ((MAX (W1.WaitS) / MAX (W1.WaitCount)) AS DECIMAL (16,4)) AS [AvgWait_Sec],
    CAST ((MAX (W1.ResourceS) / MAX (W1.WaitCount)) AS DECIMAL (16,4)) AS [AvgRes_Sec],
    CAST ((MAX (W1.SignalS) / MAX (W1.WaitCount)) AS DECIMAL (16,4)) AS [AvgSig_Sec], 
    CAST (MAX (W1.WaitS) AS DECIMAL (16,2)) AS [Wait_Sec],
    CAST (MAX (W1.ResourceS) AS DECIMAL (16,2)) AS [Resource_Sec],
    CAST (MAX (W1.SignalS) AS DECIMAL (16,2)) AS [Signal_Sec],
    MAX (W1.WaitCount) AS [Wait Count],
	CAST (N'https://www.sqlskills.com/help/waits/' + W1.wait_type AS XML) AS [Help/Info URL]
FROM Waits AS W1
INNER JOIN Waits AS W2
ON W2.RowNum <= W1.RowNum
GROUP BY W1.RowNum, W1.wait_type
HAVING SUM (W2.Percentage) - MAX (W1.Percentage) < 99 -- percentage threshold
OPTION (RECOMPILE);
------

-- Cumulative wait stats are not as useful on an idle instance that is not under load or performance pressure

-- SQL Server Wait Types Library (Paul Randal)
-- https://www.sqlskills.com/help/waits/

-- The SQL Server Wait Type Repository
-- http://blogs.msdn.com/b/psssql/archive/2009/11/03/the-sql-server-wait-type-repository.aspx

-- Wait statistics, or please tell me where it hurts
-- https://www.sqlskills.com/blogs/paul/wait-statistics-or-please-tell-me-where-it-hurts/

-- SQL Server 2005 Performance Tuning using the Waits and Queues
-- http://technet.microsoft.com/en-us/library/cc966413.aspx

-- sys.dm_os_wait_stats (Transact-SQL)
-- http://msdn.microsoft.com/en-us/library/ms179984(v=sql.105).aspx



-- Signal Waits for instance  (Query 22) (Signal Waits)
SELECT CAST(100.0 * SUM(signal_wait_time_ms) / SUM (wait_time_ms) AS NUMERIC(20,2)) AS [% Signal (CPU) Waits],
CAST(100.0 * SUM(wait_time_ms - signal_wait_time_ms) / SUM (wait_time_ms) AS NUMERIC(20,2)) AS [% Resource Waits]
FROM sys.dm_os_wait_stats WITH (NOLOCK)
WHERE wait_type NOT IN (
        N'BROKER_EVENTHANDLER', N'BROKER_RECEIVE_WAITFOR', N'BROKER_TASK_STOP',
		N'BROKER_TO_FLUSH', N'BROKER_TRANSMITTER', N'CHECKPOINT_QUEUE',
        N'CHKPT', N'CLR_AUTO_EVENT', N'CLR_MANUAL_EVENT', N'CLR_SEMAPHORE',
        N'DBMIRROR_DBM_EVENT', N'DBMIRROR_EVENTS_QUEUE', N'DBMIRROR_WORKER_QUEUE',
		N'DBMIRRORING_CMD', N'DIRTY_PAGE_POLL', N'DISPATCHER_QUEUE_SEMAPHORE',
        N'EXECSYNC', N'FSAGENT', N'FT_IFTS_SCHEDULER_IDLE_WAIT', N'FT_IFTSHC_MUTEX',
        N'HADR_CLUSAPI_CALL', N'HADR_FILESTREAM_IOMGR_IOCOMPLETION', N'HADR_LOGCAPTURE_WAIT', 
		N'HADR_NOTIFICATION_DEQUEUE', N'HADR_TIMER_TASK', N'HADR_WORK_QUEUE',
        N'KSOURCE_WAKEUP', N'LAZYWRITER_SLEEP', N'LOGMGR_QUEUE', N'ONDEMAND_TASK_QUEUE',
        N'PWAIT_ALL_COMPONENTS_INITIALIZED', N'QDS_PERSIST_TASK_MAIN_LOOP_SLEEP',
        N'QDS_CLEANUP_STALE_QUERIES_TASK_MAIN_LOOP_SLEEP', N'REQUEST_FOR_DEADLOCK_SEARCH',
		N'RESOURCE_QUEUE', N'SERVER_IDLE_CHECK', N'SLEEP_BPOOL_FLUSH', N'SLEEP_DBSTARTUP',
		N'SLEEP_DCOMSTARTUP', N'SLEEP_MASTERDBREADY', N'SLEEP_MASTERMDREADY',
        N'SLEEP_MASTERUPGRADED', N'SLEEP_MSDBSTARTUP', N'SLEEP_SYSTEMTASK', N'SLEEP_TASK',
        N'SLEEP_TEMPDBSTARTUP', N'SNI_HTTP_ACCEPT', N'SP_SERVER_DIAGNOSTICS_SLEEP',
		N'SQLTRACE_BUFFER_FLUSH', N'SQLTRACE_INCREMENTAL_FLUSH_SLEEP', N'SQLTRACE_WAIT_ENTRIES',
		N'WAIT_FOR_RESULTS', N'WAITFOR', N'WAITFOR_TASKSHUTDOWN', N'WAIT_XTP_HOST_WAIT',
		N'WAIT_XTP_OFFLINE_CKPT_NEW_LOG', N'WAIT_XTP_CKPT_CLOSE', N'XE_DISPATCHER_JOIN',
        N'XE_DISPATCHER_WAIT', N'XE_TIMER_EVENT') OPTION (RECOMPILE);
------

-- Signal Waits above 10-15% is usually a confirming sign of CPU pressure
-- Cumulative wait stats are not as useful on an idle instance that is not under load or performance pressure
-- Resource waits are non-CPU related waits


--  Get logins that are connected and how many sessions they have (Query 23) (Connection Counts)
SELECT login_name, [program_name], COUNT(session_id) AS [session_count] 
FROM sys.dm_exec_sessions WITH (NOLOCK)
GROUP BY login_name, [program_name]
ORDER BY COUNT(session_id) DESC OPTION (RECOMPILE);
------

-- This can help characterize your workload and
-- determine whether you are seeing a normal level of activity


-- Get a count of SQL connections by IP address (Query 24) (Connection Counts by IP Address)
SELECT ec.client_net_address, es.[program_name], es.[host_name], es.login_name, 
COUNT(ec.session_id) AS [connection count] 
FROM sys.dm_exec_sessions AS es WITH (NOLOCK) 
INNER JOIN sys.dm_exec_connections AS ec WITH (NOLOCK) 
ON es.session_id = ec.session_id 
GROUP BY ec.client_net_address, es.[program_name], es.[host_name], es.login_name  
ORDER BY ec.client_net_address, es.[program_name] OPTION (RECOMPILE);
------

-- This helps you figure where your database load is coming from
-- and verifies connectivity from other machines


-- Get Average Task Counts (run multiple times) (Query 25) (Avg Task Counts)
SELECT AVG(current_tasks_count) AS [Avg Task Count], 
AVG(runnable_tasks_count) AS [Avg Runnable Task Count],
AVG(pending_disk_io_count) AS [Avg Pending DiskIO Count]
FROM sys.dm_os_schedulers WITH (NOLOCK)
WHERE scheduler_id < 255 OPTION (RECOMPILE);
------

-- Sustained values above 10 suggest further investigation in that area
-- High Avg Task Counts are often caused by blocking/deadlocking or other resource contention

-- Sustained values above 1 suggest further investigation in that area
-- High Avg Runnable Task Counts are a good sign of CPU pressure
-- High Avg Pending DiskIO Counts are a sign of disk pressure

-- How to Do Some Very Basic SQL Server Monitoring
-- https://www.sqlskills.com/blogs/glenn/how-to-do-some-very-basic-sql-server-monitoring/



-- Get CPU Utilization History for last 256 minutes (in one minute intervals) (Query 26) (CPU Utilization History)
-- This version works with SQL Server 2005
DECLARE @ts_now bigint; 
SET @ts_now = (SELECT cpu_ticks / CONVERT(float, cpu_ticks_in_ms) FROM sys.dm_os_sys_info WITH (NOLOCK)); 

SELECT TOP(256) SQLProcessUtilization AS [SQL Server Process CPU Utilization], 
               SystemIdle AS [System Idle Process], 
               100 - SystemIdle - SQLProcessUtilization AS [Other Process CPU Utilization], 
               DATEADD(ms, -1 * (@ts_now - [timestamp]), GETDATE()) AS [Event Time] 
FROM ( 
	  SELECT record.value('(./Record/@id)[1]', 'int') AS record_id, 
			record.value('(./Record/SchedulerMonitorEvent/SystemHealth/SystemIdle)[1]', 'int') 
			AS [SystemIdle], 
			record.value('(./Record/SchedulerMonitorEvent/SystemHealth/ProcessUtilization)[1]', 
			'int') 
			AS [SQLProcessUtilization], [timestamp] 
	  FROM ( 
			SELECT [timestamp], CONVERT(xml, record) AS [record] 
			FROM sys.dm_os_ring_buffers WITH (NOLOCK)
			WHERE ring_buffer_type = N'RING_BUFFER_SCHEDULER_MONITOR' 
			AND record LIKE '%<SystemHealth>%') AS x 
	  ) AS y 
ORDER BY record_id DESC OPTION (RECOMPILE);
------

-- Look at the trend over the entire period. 
-- Also look at high sustained Other Process CPU Utilization values


-- Page Life Expectancy (PLE) value for each NUMA node in current instance  (Query 27) (PLE by NUMA Node)
SELECT @@SERVERNAME AS [Server Name], RTRIM([object_name]) AS [Object Name], instance_name, cntr_value AS [Page Life Expectancy]
FROM sys.dm_os_performance_counters WITH (NOLOCK)
WHERE [object_name] LIKE N'%Buffer Node%' -- Handles named instances
AND counter_name = N'Page life expectancy' OPTION (RECOMPILE);
------

-- PLE is a good measurement of memory pressure.
-- Higher PLE is better. Watch the trend over time, not the absolute value.
-- This will only return one row for non-NUMA systems.

-- Page Life Expectancy isn�t what you think�
-- https://www.sqlskills.com/blogs/paul/page-life-expectancy-isnt-what-you-think/



-- Memory Grants Pending value for current instance (Query 28) (Memory Grants Pending)
SELECT @@SERVERNAME AS [Server Name], RTRIM([object_name]) AS [Object Name], cntr_value AS [Memory Grants Pending]                                                                                                       
FROM sys.dm_os_performance_counters WITH (NOLOCK)
WHERE [object_name] LIKE N'%Memory Manager%' -- Handles named instances
AND counter_name = N'Memory Grants Pending' OPTION (RECOMPILE);
------

-- Memory Grants Pending above zero for a sustained period is a very strong indicator of memory pressure


-- Memory Clerk Usage for instance  (Query 29) (Memory Clerk Usage)
-- Look for high value for CACHESTORE_SQLCP (Ad-hoc query plans)
SELECT TOP(10) [type] AS [Memory Clerk Type], SUM(single_pages_kb)/1024 AS [SPA Memory Usage (MB)] 
FROM sys.dm_os_memory_clerks WITH (NOLOCK)
GROUP BY [type]  
ORDER BY SUM(single_pages_kb) DESC OPTION (RECOMPILE);
------

-- CACHESTORE_SQLCP  SQL Plans         
-- These are cached SQL statements or batches that aren't in stored procedures, functions and triggers
-- Watch out for high values for CACHESTORE_SQLCP

-- CACHESTORE_OBJCP  Object Plans      
-- These are compiled plans for stored procedures, functions and triggers



-- Find single-use, ad-hoc queries that are bloating the plan cache (Query 30) (Ad hoc Queries)
SELECT TOP(50) DB_NAME(t.[dbid]) AS [Database Name], t.[text] AS [Query Text], 
cp.objtype AS [Object Type], cp.cacheobjtype AS [Cache Object Type],  
cp.size_in_bytes/1024 AS [Plan Size in KB]
FROM sys.dm_exec_cached_plans AS cp WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(plan_handle) AS t
WHERE cp.cacheobjtype = N'Compiled Plan' 
AND cp.objtype IN (N'Adhoc', N'Prepared') 
AND cp.usecounts = 1
ORDER BY cp.size_in_bytes DESC, DB_NAME(t.[dbid]) OPTION (RECOMPILE);
------

-- Gives you the text and size of single-use ad-hoc queries that waste space in plan cache
-- SQL Server Agent creates lots of ad-hoc, single use query plans in SQL Server 2005
-- Running DBCC FREESYSTEMCACHE ('SQL Plans') periodically may be required to better control this.
-- Enabling forced parameterization for the database can help, but test first!

-- Plan cache, adhoc workloads and clearing the single-use plan cache bloat
-- https://www.sqlskills.com/blogs/kimberly/plan-cache-adhoc-workloads-and-clearing-the-single-use-plan-cache-bloat/



-- Database specific queries *****************************************************************

-- **** Please switch to a user database that you are interested in! *****
USE YourDatabaseName; -- make sure to change to an actual database on your instance, not the master system database
GO

-- Individual File Sizes and space available for current database  (Query 31) (File Sizes and Space)
SELECT f.name AS [File Name] , f.physical_name AS [Physical Name], 
CAST((f.size/128.0) AS DECIMAL(15,2)) AS [Total Size in MB],
CAST(f.size/128.0 - CAST(FILEPROPERTY(f.name, 'SpaceUsed') AS int)/128.0 AS DECIMAL(15,2)) 
AS [Available Space In MB], [file_id], fg.name AS [Filegroup Name]
FROM sys.database_files AS f WITH (NOLOCK) 
LEFT OUTER JOIN sys.data_spaces AS fg WITH (NOLOCK) 
ON f.data_space_id = fg.data_space_id OPTION (RECOMPILE);
------

-- Look at how large and how full the files are and where they are located
-- Make sure the transaction log is not full!!



-- I/O Statistics by file for the current database  (Query 32) (IO Stats By File)
SELECT DB_NAME(DB_ID()) AS [Database Name], df.name AS [Logical Name], vfs.[file_id], 
df.physical_name AS [Physical Name], vfs.num_of_reads, vfs.num_of_writes, vfs.io_stall_read_ms, vfs.io_stall_write_ms,
CAST(100. * vfs.io_stall_read_ms/(vfs.io_stall_read_ms + vfs.io_stall_write_ms) AS DECIMAL(10,1)) AS [IO Stall Reads Pct],
CAST(100. * vfs.io_stall_write_ms/(vfs.io_stall_write_ms + vfs.io_stall_read_ms) AS DECIMAL(10,1)) AS [IO Stall Writes Pct],
(vfs.num_of_reads + vfs.num_of_writes) AS [Writes + Reads], 
CAST(vfs.num_of_bytes_read/1048576.0 AS DECIMAL(10, 2)) AS [MB Read], 
CAST(vfs.num_of_bytes_written/1048576.0 AS DECIMAL(10, 2)) AS [MB Written],
CAST(100. * vfs.num_of_reads/(vfs.num_of_reads + vfs.num_of_writes) AS DECIMAL(10,1)) AS [# Reads Pct],
CAST(100. * vfs.num_of_writes/(vfs.num_of_reads + vfs.num_of_writes) AS DECIMAL(10,1)) AS [# Write Pct],
CAST(100. * vfs.num_of_bytes_read/(vfs.num_of_bytes_read + vfs.num_of_bytes_written) AS DECIMAL(10,1)) AS [Read Bytes Pct],
CAST(100. * vfs.num_of_bytes_written/(vfs.num_of_bytes_read + vfs.num_of_bytes_written) AS DECIMAL(10,1)) AS [Written Bytes Pct]
FROM sys.dm_io_virtual_file_stats(DB_ID(), NULL) AS vfs
INNER JOIN sys.database_files AS df WITH (NOLOCK)
ON vfs.[file_id]= df.[file_id] OPTION (RECOMPILE);
------

-- This helps you characterize your workload better from an I/O perspective
-- It helps you determine whether you has an OLTP or DW/DSS type of workload



-- Cached SP's By Execution Count (SQL 2005)  (Query 33) (SP Execution Counts)
SELECT TOP(25) OBJECT_NAME(objectid, dbid) AS [SP Name], qt.[text] AS [SP Text], 
qs.execution_count AS [Execution Count],  
qs.execution_count/DATEDIFF(Minute, qs.creation_time, GETDATE()) AS [Calls/Minute],
qs.total_worker_time/qs.execution_count AS [AvgWorkerTime],
qs.total_worker_time AS [TotalWorkerTime],
qs.total_elapsed_time/qs.execution_count AS [AvgElapsedTime],
qs.max_logical_reads, qs.max_logical_writes, qs.total_physical_reads, 
DATEDIFF(Minute, qs.creation_time, GetDate()) AS [Age in Cache]
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(qs.[sql_handle]) AS qt
WHERE qt.[dbid] = DB_ID() 
ORDER BY qs.execution_count DESC OPTION (RECOMPILE);
------

-- Tells you which cached stored procedures are called the most often
-- This helps you characterize and baseline your workload


-- Top Cached SPs By Avg Elapsed Time (SQL 2005)  (Query 34) (SP Avg Elapsed Time)
SELECT TOP(25) OBJECT_NAME(objectid, dbid) AS [SP Name], qt.[text] AS [SP Text],  
ISNULL(qs.total_elapsed_time/qs.execution_count, 0) AS [AvgElapsedTime], 
qs.execution_count AS [Execution Count], qs.total_worker_time AS [TotalWorkerTime], 
qs.total_worker_time/qs.execution_count AS [AvgWorkerTime],
ISNULL(qs.execution_count/DATEDIFF(Minute, qs.creation_time, GETDATE()), 0) AS [Calls/Minute],
qs.max_logical_reads, qs.max_logical_writes, 
DATEDIFF(Minute, qs.creation_time, GETDATE()) AS [Age in Cache]
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(qs.[sql_handle]) AS qt
WHERE qt.[dbid] = DB_ID() 
ORDER BY qs.total_elapsed_time/qs.execution_count DESC OPTION (RECOMPILE);
------

-- This helps you find long-running cached stored procedures that
-- may be easy to optimize with standard query tuning techniques

-- Cached SP's By Worker Time (SQL 2005) Worker time relates to CPU cost  (Query 35) (SP Worker Time)
SELECT TOP(25) OBJECT_NAME(objectid, dbid) AS [SP Name], qt.[text] AS [SP Text], 
qs.total_worker_time AS [TotalWorkerTime], qs.total_worker_time/qs.execution_count AS [AvgWorkerTime],
qs.execution_count AS [Execution Count], 
ISNULL(qs.execution_count/DATEDIFF(Minute, qs.creation_time, GETDATE()), 0) AS [Calls/Minute],
ISNULL(qs.total_elapsed_time/qs.execution_count, 0) AS [AvgElapsedTime], 
qs.max_logical_reads, qs.max_logical_writes, 
DATEDIFF(Minute, qs.creation_time, GETDATE()) AS [Age in Cache]
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(qs.[sql_handle]) AS qt
WHERE qt.[dbid] = DB_ID() 
ORDER BY qs.total_worker_time DESC OPTION (RECOMPILE);
------

-- This helps you find the most expensive cached stored procedures from a CPU perspective
-- You should look at this if you see signs of CPU pressure

-- Cached SP's By Logical Reads (SQL 2005) Logical reads relate to memory pressure  (Query 36) (SP Logical Reads)
SELECT TOP(25) OBJECT_NAME(objectid, dbid) AS [SP Name], qt.[text] AS [SP Text],  
total_logical_reads, qs.max_logical_reads,
total_logical_reads/qs.execution_count AS [AvgLogicalReads], qs.execution_count AS [Execution Count], 
qs.execution_count/DATEDIFF(Minute, qs.creation_time, GETDATE()) AS [Calls/Minute], 
qs.total_worker_time/qs.execution_count AS [AvgWorkerTime],
qs.total_worker_time AS [TotalWorkerTime],
qs.total_elapsed_time/qs.execution_count AS [AvgElapsedTime],
qs.total_logical_writes,
 qs.max_logical_writes, qs.total_physical_reads, 
DATEDIFF(Minute, qs.creation_time, GETDATE()) AS [Age in Cache]
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(qs.[sql_handle]) AS qt
WHERE qt.[dbid] = DB_ID() 
ORDER BY total_logical_reads DESC OPTION (RECOMPILE);
------

-- This helps you find the most expensive cached stored procedures from a memory perspective
-- You should look at this if you see signs of memory pressure


-- Cached SP's By Physical Reads (SQL 2005) Physical reads relate to read I/O pressure  (Query 37) (SP Physical Reads)
SELECT TOP(25) OBJECT_NAME(objectid, dbid) AS [SP Name], qt.[text] AS [SP Text],  
qs.total_physical_reads, total_logical_reads, qs.max_logical_reads,
total_logical_reads/qs.execution_count AS [AvgLogicalReads], qs.execution_count AS [Execution Count], 
qs.execution_count/DATEDIFF(Minute, qs.creation_time, GETDATE()) AS [Calls/Minute], 
qs.total_worker_time/qs.execution_count AS [AvgWorkerTime],
qs.total_worker_time AS [TotalWorkerTime],
qs.total_elapsed_time/qs.execution_count AS [AvgElapsedTime],
DATEDIFF(Minute, qs.creation_time, GETDATE()) AS [Age in Cache]
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(qs.[sql_handle]) AS qt
WHERE qt.[dbid] = DB_ID() -- Filter by current database
AND qs.total_physical_reads > 0
ORDER BY qs.total_physical_reads DESC OPTION (RECOMPILE);
------

-- This helps you find the most expensive cached stored procedures from a read I/O perspective
-- You should look at this if you see signs of I/O pressure or of memory pressure


-- Top Cached SPs By Total Logical Writes (SQL 2005)  (Query 38) (SP Logical Writes)
-- Logical writes relate to both memory and disk I/O pressure 
SELECT TOP(25) OBJECT_NAME(objectid, dbid) AS [SP Name], qt.[text] AS [SP Text],  
qs.total_logical_writes, qs.max_logical_writes,
qs.total_logical_writes/qs.execution_count AS [AvgLogicalWrites], qs.execution_count AS [Execution Count], 
qs.execution_count/DATEDIFF(Minute, qs.creation_time, GETDATE()) AS [Calls/Minute], 
qs.total_worker_time/qs.execution_count AS [AvgWorkerTime],
qs.total_worker_time AS [TotalWorkerTime],
qs.total_elapsed_time/qs.execution_count AS [AvgElapsedTime],
qs.total_physical_reads, 
DATEDIFF(Minute, qs.creation_time, GETDATE()) AS [Age in Cache]
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(qs.[sql_handle]) AS qt
WHERE qt.[dbid] = DB_ID()
AND qs.total_logical_writes > 0 
ORDER BY total_logical_writes DESC OPTION (RECOMPILE);
------

-- This helps you find the most expensive cached stored procedures from a write I/O perspective
-- You should look at this if you see signs of I/O pressure or of memory pressure


-- Lists the top statements by average input/output usage for the current database  (Query 39) (Top IO Statements)
SELECT TOP(50) OBJECT_NAME(qt.objectid, dbid) AS [SP Name],
(qs.total_logical_reads + qs.total_logical_writes) /qs.execution_count AS [Avg IO], qs.execution_count AS [Execution Count],
SUBSTRING(qt.[text],qs.statement_start_offset/2, 
	(CASE 
		WHEN qs.statement_end_offset = -1 
	 THEN LEN(CONVERT(nvarchar(max), qt.[text])) * 2 
		ELSE qs.statement_end_offset 
	 END - qs.statement_start_offset)/2) AS [Query Text]	
FROM sys.dm_exec_query_stats AS qs WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(qs.sql_handle) AS qt
WHERE qt.[dbid] = DB_ID()
ORDER BY [Avg IO] DESC OPTION (RECOMPILE);
------

-- Helps you find the most expensive statements for I/O by SP



-- Possible Bad NC Indexes (writes > reads)  (Query 40) (Bad NC Indexes)
SELECT OBJECT_NAME(s.[object_id]) AS [Table Name], i.name AS [Index Name], i.index_id, 
i.is_disabled, i.is_hypothetical, i.has_filter, i.fill_factor,
user_updates AS [Total Writes], user_seeks + user_scans + user_lookups AS [Total Reads],
user_updates - (user_seeks + user_scans + user_lookups) AS [Difference]
FROM sys.dm_db_index_usage_stats AS s WITH (NOLOCK)
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON s.[object_id] = i.[object_id]
AND i.index_id = s.index_id
WHERE OBJECTPROPERTY(s.[object_id],'IsUserTable') = 1
AND s.database_id = DB_ID()
AND s.user_updates > (s.user_seeks + s.user_scans + s.user_lookups)
AND i.index_id > 1 AND i.[type_desc] = N'NONCLUSTERED'
AND i.is_primary_key = 0 AND i.is_unique_constraint = 0
ORDER BY [Difference] DESC, [Total Writes] DESC, [Total Reads] ASC OPTION (RECOMPILE);
------

-- Look for indexes with high numbers of writes and zero or very low numbers of reads
-- Consider your complete workload, and how long your instance has been running
-- Investigate further before dropping an index!


-- Missing Indexes for current database by Index Advantage  (Query 41) (Missing Indexes)
SELECT DISTINCT CONVERT(decimal(18,2), user_seeks * avg_total_user_cost * (avg_user_impact * 0.01)) AS [index_advantage], 
migs.last_user_seek, mid.[statement] AS [Database.Schema.Table],
mid.equality_columns, mid.inequality_columns, mid.included_columns,
migs.unique_compiles, migs.user_seeks, migs.avg_total_user_cost, migs.avg_user_impact,
OBJECT_NAME(mid.[object_id]) AS [Table Name], p.rows AS [Table Rows]
FROM sys.dm_db_missing_index_group_stats AS migs WITH (NOLOCK)
INNER JOIN sys.dm_db_missing_index_groups AS mig WITH (NOLOCK)
ON migs.group_handle = mig.index_group_handle
INNER JOIN sys.dm_db_missing_index_details AS mid WITH (NOLOCK)
ON mig.index_handle = mid.index_handle
INNER JOIN sys.partitions AS p WITH (NOLOCK)
ON p.[object_id] = mid.[object_id]
WHERE mid.database_id = DB_ID()
AND p.index_id < 2 
ORDER BY index_advantage DESC OPTION (RECOMPILE);
------

-- Look at index advantage, last user seek time, number of user seeks to help determine source and importance
-- SQL Server is overly eager to add included columns, so beware
-- Do not just blindly add indexes that show up from this query!!!


-- Find missing index warnings for cached plans in the current database  (Query 42) (Missing Index Warnings)
-- Note: This query could take some time on a busy instance
SELECT TOP(25) OBJECT_NAME(objectid) AS [ObjectName], 
               query_plan, cp.objtype, cp.usecounts
FROM sys.dm_exec_cached_plans AS cp WITH (NOLOCK)
CROSS APPLY sys.dm_exec_query_plan(cp.plan_handle) AS qp
WHERE CAST(query_plan AS NVARCHAR(MAX)) LIKE N'%MissingIndex%'
AND dbid = DB_ID()
ORDER BY cp.usecounts DESC OPTION (RECOMPILE);
------

-- Helps you connect missing indexes to specific stored procedures
-- This can help you decide whether to add them or not


-- Breaks down buffers used by current database by object (table, index) in the buffer cache  (Query 43) (Buffer Usage)
-- Note: This query could take some time on a busy instance
SELECT OBJECT_NAME(p.[object_id]) AS [ObjectName], 
p.index_id, COUNT(*)/128 AS [buffer size(MB)],  COUNT(*) AS [buffer_count] 
FROM sys.allocation_units AS a
INNER JOIN sys.dm_os_buffer_descriptors AS b WITH (NOLOCK)
ON a.allocation_unit_id = b.allocation_unit_id
INNER JOIN sys.partitions AS p WITH (NOLOCK)
ON a.container_id = p.hobt_id
WHERE b.database_id = DB_ID()
AND p.[object_id] > 100
GROUP BY p.[object_id], p.index_id
ORDER BY buffer_count DESC OPTION (RECOMPILE);
------

-- Tells you what tables and indexes are using the most memory in the buffer cache


-- Get Table names, row counts  (Query 44) (Table Sizes)
SELECT OBJECT_NAME(object_id) AS [ObjectName], SUM(Rows) AS [RowCount]
FROM sys.partitions WITH (NOLOCK)
WHERE index_id < 2 --ignore the partitions from the non-clustered index if any
AND OBJECT_NAME(object_id) NOT LIKE N'sys%'
AND OBJECT_NAME(object_id) NOT LIKE N'queue_%' 
AND OBJECT_NAME(object_id) NOT LIKE N'filestream_tombstone%'
AND OBJECT_NAME(object_id) NOT LIKE N'fulltext%' 
GROUP BY [object_id]
ORDER BY SUM(Rows) DESC OPTION (RECOMPILE);
------

-- Gives you an idea of table sizes


-- Detect blocking (run multiple times)  (Query 45) (Detect Blocking)
SELECT t1.resource_type AS [lock type], DB_NAME(resource_database_id) AS [database],
t1.resource_associated_entity_id AS [blk object],t1.request_mode AS [lock req],  --- lock requested
t1.request_session_id AS [waiter sid], t2.wait_duration_ms AS [wait time],       -- spid of waiter  
(SELECT [text] FROM sys.dm_exec_requests AS r WITH (NOLOCK)                      -- get sql for waiter
CROSS APPLY sys.dm_exec_sql_text(r.[sql_handle]) 
WHERE r.session_id = t1.request_session_id) AS [waiter_batch],
(SELECT SUBSTRING(qt.[text],r.statement_start_offset/2, 
    (CASE WHEN r.statement_end_offset = -1 
    THEN LEN(CONVERT(nvarchar(max), qt.[text])) * 2 
    ELSE r.statement_end_offset END - r.statement_start_offset)/2) 
FROM sys.dm_exec_requests AS r WITH (NOLOCK)
CROSS APPLY sys.dm_exec_sql_text(r.[sql_handle]) AS qt
WHERE r.session_id = t1.request_session_id) AS [waiter_stmt],					-- statement blocked
t2.blocking_session_id AS [blocker sid],										-- spid of blocker
(SELECT [text] FROM sys.sysprocesses AS p										-- get sql for blocker
CROSS APPLY sys.dm_exec_sql_text(p.[sql_handle]) 
WHERE p.spid = t2.blocking_session_id) AS [blocker_stmt]
FROM sys.dm_tran_locks AS t1 WITH (NOLOCK)
INNER JOIN sys.dm_os_waiting_tasks AS t2 WITH (NOLOCK)
ON t1.lock_owner_address = t2.resource_address OPTION (RECOMPILE);
------

-- Helps troubleshoot blocking and deadlocking issues
-- The results will change from second to second on a busy system
-- You should run this query multiple times when you see signs of blocking


-- When were Statistics last updated on all indexes?  (Query 46) (Statistics Update)
SELECT SCHEMA_NAME(o.Schema_ID) + N'.' + o.NAME AS [Object Name], o.type_desc AS [Object Type],
      i.name AS [Index Name], STATS_DATE(i.[object_id], i.index_id) AS [Statistics Date], 
      s.auto_created, s.no_recompute, s.user_created, st.row_count, st.used_page_count
FROM sys.objects AS o WITH (NOLOCK)
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON o.[object_id] = i.[object_id]
INNER JOIN sys.stats AS s WITH (NOLOCK)
ON i.[object_id] = s.[object_id] 
AND i.index_id = s.stats_id
INNER JOIN sys.dm_db_partition_stats AS st WITH (NOLOCK)
ON o.[object_id] = st.[object_id]
AND i.[index_id] = st.[index_id]
WHERE o.[type] IN ('U', 'V')
AND st.row_count > 0
ORDER BY STATS_DATE(i.[object_id], i.index_id) DESC OPTION (RECOMPILE);
------  

-- Helps discover possible problems with out-of-date statistics
-- Also gives you an idea which indexes are the most active



-- Get fragmentation info for all indexes above a certain size in the current database  (Query 47) (Index Fragmentation)
-- Note: This query could take some time on a very large database
SELECT DB_NAME(ps.database_id) AS [Database Name], OBJECT_NAME(ps.OBJECT_ID) AS [Object Name], 
i.name AS [Index Name], ps.index_id, ps.index_type_desc, ps.avg_fragmentation_in_percent, 
ps.fragment_count, ps.page_count, i.fill_factor
FROM sys.dm_db_index_physical_stats(DB_ID(),NULL, NULL, NULL , N'LIMITED') AS ps
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON ps.[object_id] = i.[object_id] 
AND ps.index_id = i.index_id
WHERE ps.database_id = DB_ID()
AND ps.page_count > 2500
ORDER BY ps.avg_fragmentation_in_percent DESC OPTION (RECOMPILE);
------

-- Helps determine whether you have framentation in your relational indexes
-- and how effective your index maintenance strategy is


--- Index Read/Write stats (all tables in current DB) ordered by Reads  (Query 48) (Overall Index Usage - Reads)
SELECT OBJECT_NAME(s.[object_id]) AS [ObjectName], i.name AS [IndexName], i.index_id,
	   user_seeks + user_scans + user_lookups AS [Reads], s.user_updates AS [Writes],  
	   i.type_desc AS [IndexType], i.fill_factor AS [FillFactor]
FROM sys.dm_db_index_usage_stats AS s WITH (NOLOCK)
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON s.[object_id] = i.[object_id]
WHERE OBJECTPROPERTY(s.[object_id],'IsUserTable') = 1
AND i.index_id = s.index_id
AND s.database_id = DB_ID()
ORDER BY user_seeks + user_scans + user_lookups DESC OPTION (RECOMPILE); -- Order by reads
------

-- Show which indexes in the current database are most active for Reads


--- Index Read/Write stats (all tables in current DB) ordered by Writes  (Query 49) (Overall Index Usage - Writes)
SELECT OBJECT_NAME(s.[object_id]) AS [ObjectName], i.name AS [IndexName], i.index_id,
	   s.user_updates AS [Writes], user_seeks + user_scans + user_lookups AS [Reads], 
	   i.type_desc AS [IndexType], i.fill_factor AS [FillFactor],
	   s.last_system_update, s.last_user_update
FROM sys.dm_db_index_usage_stats AS s WITH (NOLOCK)
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON s.[object_id] = i.[object_id]
WHERE OBJECTPROPERTY(s.[object_id],'IsUserTable') = 1
AND i.index_id = s.index_id
AND s.database_id = DB_ID()
ORDER BY s.user_updates DESC OPTION (RECOMPILE);						 -- Order by writes
------

-- Show which indexes in the current database are most active for Writes


-- Get lock waits for current database (Query 50) (Lock Waits)
SELECT o.name AS [table_name], i.name AS [index_name], ios.index_id, ios.partition_number,
		SUM(ios.row_lock_wait_count) AS [total_row_lock_waits], 
		SUM(ios.row_lock_wait_in_ms) AS [total_row_lock_wait_in_ms],
		SUM(ios.page_lock_wait_count) AS [total_page_lock_waits],
		SUM(ios.page_lock_wait_in_ms) AS [total_page_lock_wait_in_ms],
		SUM(ios.page_lock_wait_in_ms)+ SUM(row_lock_wait_in_ms) AS [total_lock_wait_in_ms]
FROM sys.dm_db_index_operational_stats(DB_ID(), NULL, NULL, NULL) AS ios
INNER JOIN sys.objects AS o WITH (NOLOCK)
ON ios.[object_id] = o.[object_id]
INNER JOIN sys.indexes AS i WITH (NOLOCK)
ON ios.[object_id] = i.[object_id] 
AND ios.index_id = i.index_id
WHERE o.[object_id] > 100
GROUP BY o.name, i.name, ios.index_id, ios.partition_number
HAVING SUM(ios.page_lock_wait_in_ms)+ SUM(row_lock_wait_in_ms) > 0
ORDER BY total_lock_wait_in_ms DESC OPTION (RECOMPILE);
------

-- This query is helpful for troubleshooting blocking and deadlocking issues


-- Look at recent Full backups for the current database (Query 51) (Recent Full Backups)
SELECT TOP (30) bs.server_name, bs.database_name AS [Database Name], 
CONVERT (BIGINT, bs.backup_size / 1048576 ) AS [Backup Size (MB)],
DATEDIFF (SECOND, bs.backup_start_date, bs.backup_finish_date) AS [Backup Elapsed Time (sec)],
bs.backup_finish_date AS [Backup Finish Date], bmf.physical_device_name AS [Backup Location], bmf.physical_block_size
FROM msdb.dbo.backupset AS bs WITH (NOLOCK)
INNER JOIN msdb.dbo.backupmediafamily AS bmf WITH (NOLOCK)
ON bs.media_set_id = bmf.media_set_id  
WHERE DATEDIFF (SECOND, bs.backup_start_date, bs.backup_finish_date) > 0 
AND bs.backup_size > 0
AND bs.type = 'D' -- Change to L if you want Log backups
AND database_name = DB_NAME(DB_ID())
ORDER BY bs.backup_finish_date DESC OPTION (RECOMPILE);
------

-- Are your backup sizes and times changing over time?
-- Are you using backup compression?
-- Are you using backup checksums?
-- Are you doing copy_only backups?
-- Have you done any backup tuning with striped backups, or changing the parameters of the backup command?



-- These three Pluralsight Courses go into more detail about how to run these queries and interpret the results

-- SQL Server 2014 DMV Diagnostic Queries � Part 1 
-- https://bit.ly/2plxCer

-- SQL Server 2014 DMV Diagnostic Queries � Part 2
-- https://bit.ly/2IuJpzI

-- SQL Server 2014 DMV Diagnostic Queries � Part 3
-- https://bit.ly/2FIlCPb



-- Sign up for Microsoft Visual Studio Dev Essentials and get a free three month pass to Pluralsight

-- Microsoft Visual Studio Dev Essentials
-- http://bit.ly/1q6xbDL


-- Sign up for Microsoft Azure Essentials and get lots of free Azure usage credits, MCP exam voucher, three month Pluralsight subscription

-- Microsoft Azure Essentials
-- https://bit.ly/2JMWe8x


-- August 2017 blog series about upgrading and migrating SQL Server
-- https://bit.ly/2ftKVrX

tools\dbatools\bin\smo\Microsoft.SqlServer.SmoExtended.dll

md5: F5D99DB45C64A478C73D70531420DF36 | sha1: 397A46EF196684ABA88672B7305D7A908E421059 | sha256: 418903A38CA85F2EA4EA31E308AAFE3C3CCB11B272E4EC0379F6AF9D3954200E | sha512: B58A582324F989A66BE060413C1BC06169D7A6E632A55E5F3C9B6B2B8EE42E6BA88DC1CF6BB05AE1DF48E036B2AE2952DFFF2F9A3125052E3AF708F0DB3FB08B

tools\dbatools\bin\smo\Microsoft.SqlServer.SqlClrProvider.dll

md5: 6CC17DD0A193D295744060E928F023A9 | sha1: 4B44EEE2ED8DED8C80C2576EEB63B027F02FC035 | sha256: 10EAA6597D7088D87ED9381FBD6FCDDD54156D7A32C1BC0C6E3A2B209CD9B3C9 | sha512: BC4B6B6AFA566248E6507691F4AF1286ABEEA60773908E1E0484F6E3107689B2A0A45A9CC46C1D05DA91349B90F1EA8A85CCDCB0954471B19B85B83CC16A5D7C

tools\dbatools\bin\smo\Microsoft.SqlServer.SqlEnum.dll

md5: F61256335158769DB203C5B975A92C89 | sha1: ECF3EC80DE98A265CFABD03FA7D62D07C6D48371 | sha256: 0AE5D2C8762B761EC9DA84A7A2F6BED55B4054F8B6B6CC8F8B93CED2B0CB528C | sha512: 039082C55A3B5160E7A845F7797990B8CB266A9958077481EA7C613E37F49C0771657769739607A21A217199D189CB5EB43C49C37F194F5EA72DE70463D3358B

tools\dbatools\bin\smo\Microsoft.SqlServer.SqlTDiagm.dll

md5: 48FBD39370EE8AB525D703DCD560D059 | sha1: 0B4C3A5E9302FAE1C33B026FA3DAA22C47CEC364 | sha256: 32B79A8B4074B85489D7E0470D7E0EAE01992C7C14F6C8CF5578F4C855B5B304 | sha512: A295F434621D723B4F7FFE0C47E96AC73E10CA3AE71916054F127E25A223AD489E0B2C049BFA1FD9988000C82DB3C0AEF630C9A4CD27C5B9CAFBBC677647F581

tools\dbatools\bin\smo\Microsoft.SqlServer.SqlWmiManagement.dll

md5: 72A3A35A2991209FC316A9CA97FE93F7 | sha1: 1E81DCB081D49E9F149747754BF2D6A7598C5059 | sha256: CEF10D42FA3DDF73594685F4B6992C269E2A1D3B02B601E32E07D78C78801E5B | sha512: D3905773E84F45F41F590A1B2EFAAFDA73D181D1EB6CD8E43E0D87ADF05E16736A9E2B8B8BA74627356CAA505C9DFFEA5DDBF9AE8C4E704903773CE07E584B03

tools\dbatools\bin\smo\Microsoft.SqlServer.SString.dll

md5: 205163310761A94A9AC099CE9BDE75DD | sha1: 5B49C76A0B6B23B92FD487C4F2D48C4FD9E38F1A | sha256: 7266EC1582F9B9486D12C05BDF10787B844DB67262A3389F1119D4C747424C18 | sha512: 4F18CA9CB1CDFC954221C6E4F3FF84E845BA5D04FF4E2EF6431633BC8A21F6762A759777A19EB7C06C9CC951F852DED62EA59D2311BADC097C004D83D17DF976

tools\dbatools\bin\smo\Microsoft.SqlServer.TransactSql.ScriptDom.dll

md5: A0ED30A95E8F5D5DC8727141A4DE3EBE | sha1: C439A0A056A028467FE4AA9D5A0B69365A719448 | sha256: 89708A0EEAFEFA5153103613E45750B4774CAD15EE1FD38EB5DBC9F9FFD1A465 | sha512: B693B27A2960D8F4E87905DC70004B749D8B3D5ED08360CC91705F0CAC507688168CAE8B2479BAEC1DD2517579A9AA8952781528A533E3EB8A23095DD0ECCAFE

tools\dbatools\bin\smo\Microsoft.SqlServer.VulnerabilityAssessment.Model.dll

md5: 5CDDEC5F7A85FAB81229795D6B660E70 | sha1: C6FF70DC95C725789A1D3EF1F796E44408C1B1BA | sha256: B7FC87FB2BCBB26D124E4D97EEAC1B50B2D515C1377DEE90A857A70BA167888F | sha512: A9B86579858F45BF96A8B521E5951AC954CB97344258CC5BF0D08687049986D6DAB3EAEC27C5946CDE344657F7CF1D142E13CB43F0EBFFFF534A7D80E437BC64

tools\dbatools\bin\smo\Microsoft.SqlServer.WmiEnum.dll

md5: 93C592750C90C91F4DB29B30CCC95876 | sha1: 9A2C69ED060F6FB1B988C2EE6B33B2AF1A5DB377 | sha256: 52FBC6F7A51ED206540CF1B11C0D24FE1BC952CBFBD3AFAAC03BAB0FF5BE815F | sha512: E2860813ED0445CC09365899320306A2DF16ECCB5499FCA6569E561A83E640B851EC508D812705F4D1DC6733152650E74AFB56B135B79178FEFDDE7869BC0D25

tools\dbatools\bin\dbatools.xml

<?xml version="1.0"?>
<doc>
    <assembly>
        <name>dbatools</name>
    </assembly>
    <members>
        <member name="T:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand">
            <summary>
            Implements the Select-DbaObject command
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.InputObject">
            <summary>
            The actual input object that is being processed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.Property">
            <summary>
            The properties to select. Supports fancy DSL
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.ExcludeProperty">
            <summary>
            Properties to skip
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.ExpandProperty">
            <summary>
            A property to expand.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.Unique">
            <summary>
            Whether to exclude duplicates
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.Last">
            <summary>
            The last number of items to pick
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.First">
            <summary>
            Pick the first n items.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.Skip">
            <summary>
            Skip n items before picking items
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.SkipLast">
            <summary>
            Skip the last n items
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.Wait">
            <summary>
            
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.Index">
            <summary>
            
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.ShowProperty">
            <summary>
            THe properties to display by default
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.ShowExcludeProperty">
            <summary>
            The properties to NOT display by default
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.TypeName">
            <summary>
            The typename to assign to the psobject
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.KeepInputObject">
            <summary>
            Keep the original input object, just add to it.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand._NonclonedProperties">
            <summary>
            List of properties to NOT clone into the hashtable used against Select-Object
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand._NoAdjustment">
            <summary>
            Whether some adjustments to the object need to be done or whether the Select-Object output can be simply passed through.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand._DisplayPropertySet">
            <summary>
            The set controlling what properties will be shown by default
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand._Pipeline">
            <summary>
            THe pipeline that is wrapped around Select-Object
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.BeginProcessing">
            <summary>
            Implements the begin action of the command
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.ProcessRecord">
            <summary>
            Implements the process action of the command
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand.EndProcessing">
            <summary>
            Implements the end action of the command
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand">
            <summary>
            Implements the Set-PSFConfig command
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.FullName">
            <summary>
            The full name of the setting
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.Module">
            <summary>
            The name of the module the setting belongs to.
            Is optional due to just specifying a name is legal, in which case the first name segment becomes the module name.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.Name">
            <summary>
            The name of the setting within a module.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.Value">
            <summary>
            The value to apply.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.PersistedValue">
            <summary>
            The persisted value to apply.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.PersistedType">
            <summary>
            The persisted type to apply.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.Description">
            <summary>
            Add documentation to the setting.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.Validation">
            <summary>
            The validation script to use.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.Handler">
            <summary>
            The handling script to apply when changing the value.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.Hidden">
            <summary>
            Whether the setting should be hidden from casual discovery.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.Default">
            <summary>
            Whether the setting should be applied only when nothing exists yet.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.Initialize">
            <summary>
            Whether this is the configuration initialization call.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.SimpleExport">
            <summary>
            Enabling this will cause the module to use friendly json notation on export to file.
            This may result in loss of data precision, but is more userfriendly.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.ModuleExport">
            <summary>
            Whether this setting applies to module scope file export.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.DisableValidation">
            <summary>
            Do not apply the validation script when changing values.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.DisableHandler">
            <summary>
            Do not run the handler script when changing values.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.PassThru">
            <summary>
            Return the changed configuration setting.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.EnableException">
            <summary>
            Enable throwing exceptions.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand._Config">
            <summary>
            The configuration item changed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand._KillIt">
            <summary>
            Whether execution should be terminated silently.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand._Initialize">
            <summary>
            Whether this is an initialization execution.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand._Persisted">
            <summary>
            Whether persisted values need to be restored.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand._Exists">
            <summary>
            Whether the setting already exists.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand._PolicyEnforced">
            <summary>
            The setting to be affected was enforced by policy and cannot be changed by the user.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand._NameModule">
            <summary>
            Processed name of module.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand._NameName">
            <summary>
            Processed name of setting within module.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand._NameFull">
            <summary>
            Processed full name of setting.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand._ValidationErrorMessage">
            <summary>
            The reason validation failed.
            Filled by ApplyValue.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.BeginProcessing">
            <summary>
            Implements the begin action of Set-PSFConfig
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.ProcessRecord">
            <summary>
            Implements the process action of Set-PSFConfig
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.ApplyValue(System.Object)">
            <summary>
            Applies a value to a configuration item, invoking validation and handler scriptblocks.
            </summary>
            <param name="Value">The value to apply</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand.ApplyCommonSettings">
            <summary>
            Abstracts out 
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand">
            <summary>
            Implements the Write-Message command, performing message handling and loggin
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.Level">
            <summary>
            This parameter represents the verbosity of the message. The lower the number, the more important it is for a human user to read the message.
            By default, the levels are distributed like this:
            - 1-3 Direct verbose output to the user (using Write-Host)
            - 4-6 Output only visible when requesting extra verbosity (using Write-Verbose)
            - 1-9 Debugging information, written using Write-Debug
            
            In addition, it is possible to select the level "Warning" which moves the message out of the configurable range:
            The user will always be shown this message, unless he silences the entire verbosity.
            
            Possible levels:
            Critical (1), Important / Output / Host (2), Significant (3), VeryVerbose (4), Verbose (5), SomewhatVerbose (6), System (7), Debug (8), InternalComment (9), Warning (666)
            Either one of the strings or its respective number will do as input.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.Message">
            <summary>
            The message to write/log. The function name and timestamp will automatically be prepended.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.Tag">
            <summary>
            Tags to add to the message written.
            This allows filtering and grouping by category of message, targeting specific messages.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.FunctionName">
            <summary>
            The name of the calling function.
            Will be automatically set, but can be overridden when necessary.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.ModuleName">
            <summary>
            The name of the module, the calling function is part of.
            Will be automatically set, but can be overridden when necessary.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.File">
            <summary>
            The file in which Write-Message was called.
            Will be automatically set, but can be overridden when necessary.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.Line">
            <summary>
            The line on which Write-Message was called.
            Will be automatically set, but can be overridden when necessary.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.ErrorRecord">
            <summary>
            If an error record should be noted with the message, add the full record here.
            Especially designed for use with Warning-mode, it can legally be used in either mode.
            The error will be added to the $Error variable and enqued in the logging/debugging system.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.Exception">
            <summary>
            Allows specifying an inner exception as input object. This will be passed on to the logging and used for messages.
            When specifying both ErrorRecord AND Exception, Exception wins, but ErrorRecord is still used for record metadata.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.Once">
            <summary>
            Setting this parameter will cause this function to write the message only once per session.
            The string passed here and the calling function's name are used to create a unique ID, which is then used to register the action in the configuration system.
            Thus will the lockout only be written if called once and not burden the system unduly.
            This lockout will be written as a hidden value, to see it use Get-DbaConfig -Force.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.OverrideExceptionMessage">
            <summary>
            Disables automatic appending of exception messages.
            Use in cases where you already have a speaking message interpretation and do not need the original message.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.Target">
            <summary>
            Add the object the message is all about, in order to simplify debugging / troubleshooting.
            For example, when calling this from a function targeting a remote computer, the computername could be specified here, allowing all messages to easily be correlated to the object processed.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.EnableException">
            <summary>
            This parameters disables user-friendly warnings and enables the throwing of exceptions.
            This is less user friendly, but allows catching exceptions in calling scripts.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.Breakpoint">
            <summary>
            Enables breakpoints on the current message. By default, setting '-Debug' will NOT cause an interrupt on the current position.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._timestamp">
            <summary>
            The start time of the cmdlet
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._silent">
            <summary>
            Whether this cmdlet is run in silent mode
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._fromStopFunction">
            <summary>
            Whether this cmdlet was called by Stop-Function
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._callStack">
            <summary>
            The current callstack
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._stackDepth">
            <summary>
            How many items exist on the callstack
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._message">
            <summary>
            The message to write
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._messageSimple">
            <summary>
            The message simplified without timestamps. Used for logging.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._messageColor">
            <summary>
            The message to write in color
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._messageDeveloper">
            <summary>
            Non-colored version of developermode
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._messageDeveloperColor">
            <summary>
            Colored version of developermode
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._writeHostScript">
            <summary>
            Scriptblock that writes the host messages
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._Tags">
            <summary>
            List of tags to process
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._isDebug">
            <summary>
            Whether debug mode is enabled
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._errorQualifiedMessage">
            <summary>
            The input message with the error content included if desired
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._MessageSystem">
            <summary>
            The final message to use for internal logging
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._MessageStreams">
            <summary>
            The final message to use for writing to streams, such as verbose or warning
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._MessageHost">
            <summary>
            The final message to use for host messages (write using Write-HostColor)
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._BreadCrumbsString">
            <summary>
            Provide breadcrumb queue of the callstack
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand._BreadCrumbsStringColored">
            <summary>
            Provide a breadcrumb queue of the callstack in color tags
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.BeginProcessing">
            <summary>
            Processes the begin phase of the cmdlet
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.ProcessRecord">
            <summary>
            Processes the process phase of the cmdlet
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.ResolveTarget(System.Object)">
            <summary>
            Processes the target transform rules on an input object
            </summary>
            <param name="Item">The item to transform</param>
            <returns>The transformed object</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.ResolveException(System.Exception)">
            <summary>
            Processes the specified exception specified
            </summary>
            <param name="Item">The exception to process</param>
            <returns>The transformed exception</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.ResolveLevel(Sqlcollaborative.Dbatools.Message.MessageLevel)">
            <summary>
            Processs the input level and apply policy and rules
            </summary>
            <param name="Level">The original level of the message</param>
            <returns>The processed level</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.GetMessage">
            <summary>
            Builds the message item for display of Verbose, Warning and Debug streams
            </summary>
            <returns>The message to return</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.GetMessageSimple">
            <summary>
            Builds the base message for internal system use.
            </summary>
            <returns>The message to return</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.GetMessageColor">
            <summary>
            Builds the message item if needed and returns it
            </summary>
            <returns>The message to return</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.GetMessageDeveloper">
            <summary>
            Non-host output in developermode
            </summary>
            <returns>The string to write on messages that don't go straight to Write-HostColor</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Commands.WriteMessageCommand.GetMessageDeveloperColor">
            <summary>
            Host output in developermode
            </summary>
            <returns>The string to write on messages that go straight to Write-HostColor</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Computer.DiskSpace">
            <summary>
            Data Container for the output of Get-DbaDiskSpace
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.ComputerName">
            <summary>
            The computer that was scanned
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.Name">
            <summary>
            Name of the disk
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.Label">
            <summary>
            Label of the disk
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.Capacity">
            <summary>
            What's the total capacity of the disk?
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.Free">
            <summary>
            How much is still free?
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.PercentFree">
            <summary>
            How much is still free
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.BlockSize">
            <summary>
            What blocksize is the object set to
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.FileSystem">
            <summary>
            What filesystem is installed on the system
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.Type">
            <summary>
            What kind of drive is it?
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.IsSqlDisk">
            <summary>
            Whether the drive is a sql disk. Nullable, because it is an optional property and may not always be included, thus a third state is necessary.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.Server">
            <summary>
            The computer that was scanned. Legacy-Name
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.DriveType">
            <summary>
            The type of drive this is in the legacy string notation
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.SizeInBytes">
            <summary>
            The total capacity in Bytes
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.FreeInBytes">
            <summary>
            The free space in Bytes
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.SizeInKB">
            <summary>
            The total capacity in KB
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.FreeInKB">
            <summary>
            The free space in KB
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.SizeInMB">
            <summary>
            The total capacity in MB
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.FreeInMB">
            <summary>
            The free space in MB
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.SizeInGB">
            <summary>
            The total capacity in GB
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.FreeInGB">
            <summary>
            The free space in GB
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.SizeInTB">
            <summary>
            The total capacity in TB
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.FreeInTB">
            <summary>
            The free space in TB
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.SizeInPB">
            <summary>
            The total capacity in PB
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Computer.DiskSpace.FreeInPB">
            <summary>
            The free space in PB
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Computer.DriveType">
            <summary>
            What kind of drive are you?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.DriveType.Unknown">
            <summary>
            The drive type is not actually known
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.DriveType.NoRootDirectory">
            <summary>
            The drive has no root directory
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.DriveType.RemovableDisk">
            <summary>
            The drive is a removable disk
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.DriveType.LocalDisk">
            <summary>
            The drive is a local disk
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.DriveType.NetworkDrive">
            <summary>
            The drive is a network drive
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.DriveType.CompactDisk">
            <summary>
            The drive is a compact disk
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.DriveType.RAMDisk">
            <summary>
            The drive is a RAM disk
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Computer.PageFileSetting">
            <summary>
            Data container, listing pagefile settings.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.PageFileSetting.ComputerName">
            <summary>
            The name of the computer
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.PageFileSetting.AutoPageFile">
            <summary>
            Whether Automatic PageFile management is enabled
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.PageFileSetting.FileName">
            <summary>
            The pagefile name
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.PageFileSetting.Status">
            <summary>
            The pagefile status
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.PageFileSetting.SystemManaged">
            <summary>
            Whether the pagefile is system managed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.PageFileSetting.LastModified">
            <summary>
            When were the settings last changed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.PageFileSetting.LastAccessed">
            <summary>
            When were the settings last accessed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.PageFileSetting.AllocatedBaseSize">
            <summary>
            The base allocated pagefile size in MB
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.PageFileSetting.InitialSize">
            <summary>
            The initial pagefile size in MB
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.PageFileSetting.MaximumSize">
            <summary>
            The maximum pagefile size in MB
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.PageFileSetting.PeakUsage">
            <summary>
            The maximum percent of the pagefile limit that has been used
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Computer.PageFileSetting.CurrentUsage">
            <summary>
            The currently used percentage of the pagefile limit that is in use.
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Configuration.Config">
            <summary>
            Configuration Manager as well as individual configuration object.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.Config.Name">
            <summary>
            The Name of the setting
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Configuration.Config.FullName">
            <summary>
            The full name of the configuration entry, comprised of both Module and Name.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.Config.Module">
            <summary>
            The module of the setting. Helps being able to group configurations.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.Config.Description">
            <summary>
            A description of the specific setting
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Configuration.Config.Type">
            <summary>
            The data type of the value stored in the configuration element.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Configuration.Config.Value">
            <summary>
            The value stored in the configuration element
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Configuration.Config.SafeValue">
            <summary>
            The value stored in the configuration element, but without deserializing objects.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Configuration.Config.Unchanged">
            <summary>
            Whether the value of the configuration setting has been changed since its initialization.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.Config.Handler">
            <summary>
            The handler script that is run whenever the configuration value is set.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.Config.Validation">
            <summary>
            Validates the user input
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.Config.Hidden">
            <summary>
            Setting this to true will cause the element to not be discovered unless using the '-Force' parameter on "Get-DbaConfig"
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Configuration.Config.Initialized">
            <summary>
            Whether the setting has been initialized. This handles module imports and avoids modules overwriting settings when imported in multiple runspaces.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.Config.PolicySet">
            <summary>
            Whether this setting was set by policy
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Configuration.Config.PolicyEnforced">
            <summary>
            Whether this setting was set by policy and forbids changes to the configuration.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.Config.SimpleExport">
            <summary>
            Enabling this causes export to json to use simple json serialization for data transmission.
            This is suitable for simple data that is not sensitive to conversion losses.
            Simple export leads to exports more easily readable to the human eye.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.Config.ModuleExport">
            <summary>
            Whether this setting should be exported to a module specific file when exporting to json by modulename.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Configuration.Config.RegistryData">
            <summary>
            The finalized value to put into the registry value when using policy to set this setting.
            Deprecated property.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.Config.DefaultValue">
            <summary>
            The default value the configuration item was set to when initializing
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Configuration.Config.SetPersistedValue(Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType,System.String)">
            <summary>
            Applies the persisted value to the configuration item.
            This method should only be called by PSFramework internals
            </summary>
            <param name="Type">The type of data being specified</param>
            <param name="ValueString">The value string to register</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Configuration.Config.ResetValue">
            <summary>
            Resets the configuration value to its configured default value
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Configuration.ConfigScope">
            <summary>
            The location where a setting was applied
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigScope.UserDefault">
            <summary>
            The configuration is set as default value for the user
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigScope.UserMandatory">
            <summary>
            The configuration is enforced for the user
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigScope.SystemDefault">
            <summary>
            The configuration is set as default value for all users on the system
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigScope.SystemMandatory">
            <summary>
            The configuration is enforced for all users on the system.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigScope.FileUserLocal">
            <summary>
            The configuration is stored as Json in the per user local machine config directory.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigScope.FileUserShared">
            <summary>
            The configuration is stored as Json in the per user config directory shared across machines.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigScope.FileSystem">
            <summary>
            The configuration is stored as Json in the local computer config directory.
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Configuration.ConfigurationHost">
            <summary>
            Host class providing static configuration settings that are constant across all runspaces within the process.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationHost.Configurations">
            <summary>
            Hashtable containing all the configuration entries
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationHost.Validation">
            <summary>
            Hashtable containing all the registered validations
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationHost.ImportFromRegistryDone">
            <summary>
            Whether the import from registry has been completed. Prevents multiple imports and overwrites when importing the module multiple times.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Configuration.ConfigurationHost.ConvertToPersistedValue(System.Object)">
            <summary>
            Converts any object into its persisted state.
            </summary>
            <param name="Item">The item to convert.</param>
            <returns>Its persisted state representation.</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Configuration.ConfigurationHost.ConvertFromPersistedValue(System.String,Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType)">
            <summary>
            Converts a persisted value back to its original data type
            </summary>
            <param name="PersistedValue">The value in its persisted state</param>
            <param name="Type">The type of the persisted value</param>
            <returns>The natural state of the value originally persisted</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Configuration.ConfigurationHost.ConvertFromPersistedValue(System.String)">
            <summary>
            Converts a persisted value back to its original data type
            </summary>
            <param name="TypeQualifiedPersistedValue">The value in its persisted state, with a prefixed type identifier.</param>
            <returns>The natural state of the value originally persisted</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Configuration.ConfigurationHost.Utf8ToBase64(System.String)">
            <summary>
            Converts a plain text into a base64 string
            </summary>
            <param name="Value">The string to convert</param>
            <returns>base64 encoded version of string.</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Configuration.ConfigurationHost.Base64ToUtf8(System.String)">
            <summary>
            Converts a base64 encoded string into plain text
            </summary>
            <param name="Value">The string to convert</param>
            <returns>Plain Text string</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Configuration.ConfigurationValue">
            <summary>
            Contains all information about a configuration item's value
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Configuration.ConfigurationValue.Value">
            <summary>
            The runtime value of the setting.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Configuration.ConfigurationValue.PersistedValue">
            <summary>
            The value in its persisted state
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValue.PersistedType">
            <summary>
            The kind of 
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Configuration.ConfigurationValue.TypeQualifiedPersistedValue">
            <summary>
            The type qualified representation of the persisted value
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Configuration.ConfigurationValue.SafeValue">
            <summary>
            Ensures wanton Get-PSFConfig will not deserialize persisted objects that might have registered deserialization in their module.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValue._Value">
            <summary>
            Internal storage for the Value property
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValue._PersistedValue">
            <summary>
            Internal storage for the PersistedValue property
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Configuration.ConfigurationValue.ToString">
            <summary>
            The string representation of its actual value
            </summary>
            <returns>Returns the type-qualified string representation of its value</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Configuration.ConfigurationValue.#ctor(System.String,Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType)">
            <summary>
            Creates a value object from persisted data
            </summary>
            <param name="PersistedValue">The value that will be persisted</param>
            <param name="PersistedType">The type of the value to be persisted</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Configuration.ConfigurationValue.#ctor(System.Object)">
            <summary>
            Creates a value object from runtime data
            </summary>
            <param name="Value">The value that will be stored</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType">
            <summary>
            The data types supported by the configuration system.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType.Unknown">
            <summary>
            An unknown type, should be prevented
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType.Null">
            <summary>
            The value is as empty as the void.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType.Bool">
            <summary>
            The value is of a true/false kind
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType.Int">
            <summary>
            The value is a regular integer
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType.Double">
            <summary>
            The value is a double numeric value
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType.Long">
            <summary>
            The value is a long type
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType.String">
            <summary>
            The value is a common string
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType.Timespan">
            <summary>
            The value is a regular timespan
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType.Datetime">
            <summary>
            The value is a plain datetime
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType.ConsoleColor">
            <summary>
            The value is a fancy console color
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType.Array">
            <summary>
            The value is an array full of booty
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType.Hashtable">
            <summary>
            The value is a hashtable
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Configuration.ConfigurationValueType.Object">
            <summary>
            The value is something indeterminate, but possibly complex
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Connection.ConnectionHost">
            <summary>
            Provides static tools for managing connections
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.Connections">
            <summary>
            List of all registered connections.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.BadConnectionTimeout">
            <summary>
            The time interval that must pass, before a connection using a known to not work connection protocol is reattempted
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.DisableCache">
            <summary>
            Globally disables all caching done by the Computer Management functions.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.DisableBadCredentialCache">
            <summary>
            Disables the caching of bad credentials. dbatools caches bad logon credentials for wmi/cim and will not reuse them.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.DisableCredentialAutoRegister">
            <summary>
            Disables the automatic registration of working credentials. dbatools will caches the last working credential when connecting using wmi/cim and will use those rather than using known bad credentials
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.OverrideExplicitCredential">
            <summary>
            Enabling this will force the use of the last credentials known to work, rather than even trying explicit credentials.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.EnableCredentialFailover">
            <summary>
            Enables automatic failover to working credentials, when passed credentials either are known, or turn out to not work.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.DisableCimPersistence">
            <summary>
            Globally disables the persistence of Cim sessions used to connect to a target system.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.DisableConnectionCimRM">
            <summary>
            Whether the CM connection using Cim over WinRM is disabled globally
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.DisableConnectionCimDCOM">
            <summary>
            Whether the CM connection using Cim over DCOM is disabled globally
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.DisableConnectionWMI">
            <summary>
            Whether the CM connection using WMI is disabled globally
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.DisableConnectionPowerShellRemoting">
            <summary>
            Whether the CM connection using PowerShell Remoting is disabled globally
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.SqlConnectionTimeout">
            <summary>
            The number of seconds before a sql connection attempt times out
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.PSSessions">
            <summary>
            List of all session containers used to maintain a cache
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ConnectionHost.PSSessionGet(System.Guid,System.String)">
            <summary>
            Returns a registered session for a given computer on a given runspace. Returns null if nothing is registered.
            </summary>
            <param name="Runspace">The host runspace that opened the session</param>
            <param name="ComputerName">The computer connected to</param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ConnectionHost.PSSessionSet(System.Guid,System.String,System.Management.Automation.Runspaces.PSSession)">
            <summary>
            Registeres a remote session under the owning runspace in its respective computer name
            </summary>
            <param name="Runspace">The runspace that owns the session</param>
            <param name="ComputerName">The computer the session connects to</param>
            <param name="Session">The session object</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ConnectionHost.PSSessionPurgeExpired">
            <summary>
            Searches the cache for an expired remoting session and purges it. After purging it from the list, it still needs to be closed!
            </summary>
            <returns>The session purged that then needs to be closed</returns>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.ConnectionHost.PSSessionCountExpired">
            <summary>
            The number of expired sessions 
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.PSSessionTimeout">
            <summary>
            The time until established connections will be considered expired (if available)
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ConnectionHost.PSSessionCacheEnabled">
            <summary>
            Whether sessions should be cached at all
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Connection.ManagementConnection">
            <summary>
            Contains management connection information for a windows server
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.ManagementConnection.ComputerName">
            <summary>
            The computer to connect to
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.ManagementConnection.DisableBadCredentialCache">
            <summary>
            Locally disables the caching of bad credentials
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.ManagementConnection.DisableCredentialAutoRegister">
            <summary>
            Locally disables the caching of working credentials
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.ManagementConnection.OverrideExplicitCredential">
            <summary>
            Locally overrides explicit credentials with working ones that were cached
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.ManagementConnection.EnableCredentialFailover">
            <summary>
            Locally enables automatic failover to working credentials, when passed credentials either are known, or turn out to not work.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.ManagementConnection.DisableCimPersistence">
            <summary>
            Locally disables the persistence of Cim sessions used to connect to a target system.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.ManagementConnection.DisabledConnectionTypes">
            <summary>
            Connectiontypes that will never be used
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.RestoreDefaultConfiguration">
            <summary>
            Restores all deviations from public policy back to default
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnection.OverrideConnectionPolicy">
            <summary>
            Whether this connection adhers to the global connection lockdowns or not
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.ManagementConnection.CimRM">
            <summary>
            Did the last connection attempt using CimRM work?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnection.LastCimRM">
            <summary>
            When was the last connection attempt using CimRM?
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.ManagementConnection.CimDCOM">
            <summary>
            Did the last connection attempt using CimDCOM work?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnection.LastCimDCOM">
            <summary>
            When was the last connection attempt using CimRM?
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.ManagementConnection.Wmi">
            <summary>
            Did the last connection attempt using Wmi work?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnection.LastWmi">
            <summary>
            When was the last connection attempt using CimRM?
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.ManagementConnection.PowerShellRemoting">
            <summary>
            Did the last connection attempt using PowerShellRemoting work?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnection.LastPowerShellRemoting">
            <summary>
            When was the last connection attempt using CimRM?
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.ReportSuccess(Sqlcollaborative.Dbatools.Connection.ManagementConnectionType)">
            <summary>
            Report the successful connection against the computer of this connection
            </summary>
            <param name="Type">What connection type succeeded?</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.ReportFailure(Sqlcollaborative.Dbatools.Connection.ManagementConnectionType)">
            <summary>
            Report the failure of connecting to the target computer
            </summary>
            <param name="Type">What connection type failed?</param>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnection.Credentials">
            <summary>
            Any registered credentials to use on the connection.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnection.WindowsCredentialsAreBad">
            <summary>
            Whether the default windows credentials are known to not work against the target.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnection.UseWindowsCredentials">
            <summary>
            Whether windows credentials are known to be good. Do not build conditions on them being false, just on true.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnection.KnownBadCredentials">
            <summary>
            Credentials known to not work. They will not be used when specified.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.AddBadCredential(System.Management.Automation.PSCredential)">
            <summary>
            Adds a credentials object to the list of credentials known to not work.
            </summary>
            <param name="Credential">The bad credential that must be punished</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.AddGoodCredential(System.Management.Automation.PSCredential)">
            <summary>
            Reports a credentials object as being legit.
            </summary>
            <param name="Credential">The functioning credential that we may want to use again</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.GetCredential(System.Management.Automation.PSCredential)">
            <summary>
            Calculates, which credentials to use. Will consider input, compare it with know not-working credentials or use the configured working credentials for that.
            </summary>
            <param name="Credential">Any credential object a user may have explicitly specified.</param>
            <returns>The Credentials to use</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.IsBadCredential(System.Management.Automation.PSCredential)">
            <summary>
            Tests whether the input credential is on the list known, bad credentials
            </summary>
            <param name="Credential">The credential to test</param>
            <returns>True if the credential is known to not work, False if it is not yet known to not work</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.RemoveBadCredential(System.Management.Automation.PSCredential)">
            <summary>
            Removes an item from the list of known bad credentials
            </summary>
            <param name="Credential">The credential to remove</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.GetConnectionType(Sqlcollaborative.Dbatools.Connection.ManagementConnectionType,System.Boolean)">
            <summary>
            Returns the next connection type to try.
            </summary>
            <param name="ExcludedTypes">Exclude any type already tried and failed</param>
            <param name="Force">Overrides the timeout on bad connections</param>
            <returns>The next type to try.</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.GetConnectionTypesTimed(System.DateTime)">
            <summary>
            Returns a list of all available connection types whose inherent timeout has expired.
            </summary>
            <param name="Timestamp">All last connection failures older than this point in time are considered to be expired</param>
            <returns>A list of all valid connection types</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.GetConnectionTypesTimed(System.TimeSpan)">
            <summary>
            Returns a list of all available connection types whose inherent timeout has expired.
            </summary>
            <param name="Timespan">All last connection failures older than this far back into the past are considered to be expired</param>
            <returns>A list of all valid connection types</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.#ctor">
            <summary>
            Creates a new, empty connection object. Necessary for serialization.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.#ctor(System.String)">
            <summary>
            Creates a new default connection object, containing only its computer's name and default results.
            </summary>
            <param name="ComputerName">The computer targeted. Will be forced to lowercase.</param>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.ManagementConnection.CimWinRMOptions">
            <summary>
            The options ot use when establishing a CIM Session
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.GetDefaultCimWsmanOptions">
            <summary>
            Returns the default wsman options object
            </summary>
            <returns>Something very default-y</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.GetCimRMInstance(System.Management.Automation.PSCredential,System.String,System.String)">
            <summary>
            Get all cim instances of the appropriate class using WinRM
            </summary>
            <param name="Credential">The credentiuls to use for the connection.</param>
            <param name="Class">The class to query.</param>
            <param name="Namespace">The namespace to look in (defaults to root\cimv2).</param>
            <returns>Hopefully a mountainload of CimInstances</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.QueryCimRMInstance(System.Management.Automation.PSCredential,System.String,System.String,System.String)">
            <summary>
            Get all cim instances matching the query using WinRM
            </summary>
            <param name="Credential">The credentiuls to use for the connection.</param>
            <param name="Query">The query to use requesting information.</param>
            <param name="Dialect">Defaults to WQL.</param>
            <param name="Namespace">The namespace to look in (defaults to root\cimv2).</param>
            <returns></returns>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.ManagementConnection.CimDComOptions">
            <summary>
            The options ot use when establishing a CIM Session
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.GetDefaultCimDcomOptions">
            <summary>
            Returns the default DCom options object
            </summary>
            <returns>Something very default-y</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.GetCimDComInstance(System.Management.Automation.PSCredential,System.String,System.String)">
            <summary>
            Get all cim instances of the appropriate class using DCOM
            </summary>
            <param name="Credential">The credentiuls to use for the connection.</param>
            <param name="Class">The class to query</param>
            <param name="Namespace">The namespace to look in (defaults to root\cimv2)</param>
            <returns>Hopefully a mountainload of CimInstances</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.QueryCimDCOMInstance(System.Management.Automation.PSCredential,System.String,System.String,System.String)">
            <summary>
            Get all cim instances matching the query using DCOM
            </summary>
            <param name="Credential">The credentiuls to use for the connection.</param>
            <param name="Query">The query to use requesting information.</param>
            <param name="Dialect">Defaults to WQL.</param>
            <param name="Namespace">The namespace to look in (defaults to root\cimv2).</param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.ManagementConnection.ToString">
            <summary>
            Simple string representation
            </summary>
            <returns>Returns the computerName it is connection for</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Connection.ManagementConnectionProtocolState">
            <summary>
            The various types of state a connection-protocol may have
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnectionProtocolState.Unknown">
            <summary>
            The default initial state, before any tests are performed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnectionProtocolState.Success">
            <summary>
            A successful connection was last established
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnectionProtocolState.Error">
            <summary>
            Connecting using the relevant protocol failed last it was tried
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnectionProtocolState.Disabled">
            <summary>
            The relevant protocol has been disabled and should not be used
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Connection.ManagementConnectionType">
            <summary>
            The various ways to connect to a windows server fopr management purposes.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnectionType.None">
            <summary>
            No Connection-Type
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnectionType.CimRM">
            <summary>
            Cim over a WinRM connection
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnectionType.CimDCOM">
            <summary>
            Cim over a DCOM connection
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnectionType.Wmi">
            <summary>
            WMI Connection
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.ManagementConnectionType.PowerShellRemoting">
            <summary>
            Connecting with PowerShell remoting and performing WMI queries locally
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Connection.PSSessionContainer">
            <summary>
            The container that lists all sessions for a given runspace
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.PSSessionContainer.Runspace">
            <summary>
            The runspace that owns the sessions
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Connection.PSSessionContainer.CountExpired">
            <summary>
            The count of expired sessions registered
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.PSSessionContainer.Sessions">
            <summary>
            List of sessions and their associated computer names
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.PSSessionContainer.ConnectionTimestamps">
            <summary>
            List of timestamps, when the last command was run against them
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.PSSessionContainer.#ctor(System.Guid)">
            <summary>
            Creates a list of sessions the current runspace is connected to.
            </summary>
            <param name="Runspace">The Guid of the runspace that is the owner of the registered sessions</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.PSSessionContainer.Get(System.String)">
            <summary>
            Returns the requested session.
            </summary>
            <param name="ComputerName">The name of the host whose connection to retrieve</param>
            <returns>The established connection to the host, null if none exists.</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.PSSessionContainer.Set(System.String,System.Management.Automation.Runspaces.PSSession)">
            <summary>
            Sets a session and writes its timestamp to the cache
            </summary>
            <param name="ComputerName">The hostname it connects to.</param>
            <param name="Session">The session that is being registered.</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.PSSessionContainer.GetExpiredNames">
            <summary>
            Returns the name of hostnames with expired sessions
            </summary>
            <returns>THe hostnames whose session has expired</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Connection.PSSessionContainer.PurgeExpiredSession">
            <summary>
            Removes an expired session from the cache, an returns it, so it can be properly closed.
            </summary>
            <returns>Returns a session to disconnect</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Connection.SqlConnectionProtocol">
            <summary>
            The protocol to connect over via SMO
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.SqlConnectionProtocol.Any">
            <summary>
            Connect using any protocol available
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.SqlConnectionProtocol.TCP">
            <summary>
            Connect using TCP/IP
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Connection.SqlConnectionProtocol.NP">
            <summary>
            Connect using named pipes or shared memory
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Database.BackupHistory">
            <summary>
            Object containing the information about the history of mankind ... or a database backup. WHo knows.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.ComputerName">
            <summary>
            The name of the computer running MSSQL Server
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.InstanceName">
            <summary>
            The Instance that was queried
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.SqlInstance">
            <summary>
            The full Instance name as seen from outside
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.Database">
            <summary>
            The Database that was backed up
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.UserName">
            <summary>
            The user that is running the backup
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.Start">
            <summary>
            When was the backup started
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.End">
            <summary>
            When did the backup end
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.Duration">
            <summary>
            What was the longest duration among the backups
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.Path">
            <summary>
            Where is the backup stored
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.TotalSize">
            <summary>
            What is the total size of the backup
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.CompressedBackupSize">
            <summary>
            What is the total compressesed size of the backup
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.CompressionRatio">
            <summary>
            What is the ratio of total size to compressed size of the backup
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.Type">
            <summary>
            The kind of backup this was
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.BackupSetId">
            <summary>
            The ID for the Backup job
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.DeviceType">
            <summary>
            What kind of backup-device was the backup stored to
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.Software">
            <summary>
            What is the name of the backup software?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.FullName">
            <summary>
            The full name of the backup
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.FileList">
            <summary>
            The files that are part of this backup
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.Position">
            <summary>
            The position of the backup
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.FirstLsn">
            <summary>
            The first Log Sequence Number
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.DatabaseBackupLsn">
            <summary>
            The Log Squence Number that marks the beginning of the backup
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.CheckpointLsn">
            <summary>
            The checkpoint's Log Sequence Number
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.LastLsn">
            <summary>
            The last Log Sequence Number
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.SoftwareVersionMajor">
            <summary>
            The primary version number of the Sql Server
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.IsCopyOnly">
            <summary>
            Was the backup performed with the CopyOnlyOption
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.LastRecoveryForkGUID">
            <summary>
            Recovery Fork backup was takeon
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.BackupHistory.RecoveryModel">
            <summary>
            Recovery Model of the database when backup was taken
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Database.Dependency">
            <summary>
            Class containing all dependency information over a database object
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.Dependency.ComputerName">
            <summary>
            The name of the SQL server from whence the query came
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.Dependency.ServiceName">
            <summary>
            Name of the service running the database containing the dependency
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.Dependency.SqlInstance">
            <summary>
            The Instance the database containing the dependency is running in.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.Dependency.Dependent">
            <summary>
            The name of the dependent
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.Dependency.Type">
            <summary>
            The kind of object the dependent is
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.Dependency.Owner">
            <summary>
            The owner of the dependent (usually the Database)
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.Dependency.IsSchemaBound">
            <summary>
            Whether the dependency is Schemabound. If it is, then the creation statement order is of utmost importance.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.Dependency.Parent">
            <summary>
            The immediate parent of the dependent. Useful in multi-tier dependencies.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.Dependency.ParentType">
            <summary>
            The type of object the immediate parent is.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.Dependency.Script">
            <summary>
            The script used to create the object.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.Dependency.Tier">
            <summary>
            The tier in the dependency hierarchy tree. Used to determine, which dependency must be applied in which order.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.Dependency.Object">
            <summary>
            The smo object of the dependent.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.Dependency.Urn">
            <summary>
            The Uniform Resource Name of the dependent.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Database.Dependency.OriginalResource">
            <summary>
            The object of the original resource, from which the dependency hierachy has been calculated.
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord">
            <summary>
            An error record written by dbatools
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord.CategoryInfo">
            <summary>
            The category of the error
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord.ErrorDetails">
            <summary>
            The details on the error
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord.Exception">
            <summary>
            The actual exception thrown
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord.FullyQualifiedErrorId">
            <summary>
            The specific error identity, used to identify the target
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord.InvocationInfo">
            <summary>
            The details of how this was called.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord.ScriptStackTrace">
            <summary>
            The script's stacktrace
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord.TargetObject">
            <summary>
            The object being processed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord.FunctionName">
            <summary>
            The name of the function throwing the error
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord.Timestamp">
            <summary>
            When was the error thrown
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord.Message">
            <summary>
            The message that was written in a userfriendly manner
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord.Runspace">
            <summary>
            The runspace the error occured on.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord.#ctor">
            <summary>
            Create an empty record
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord.#ctor(System.Management.Automation.ErrorRecord,System.String,System.DateTime,System.String)">
            <summary>
            Create a filled out error record
            </summary>
            <param name="Record">The original error record</param>
            <param name="FunctionName">The function that wrote the error</param>
            <param name="Timestamp">When was the error generated</param>
            <param name="Message">What message was passed when writing the error</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.dbaSystem.DbaErrorRecord.#ctor(System.Management.Automation.ErrorRecord,System.String,System.DateTime,System.String,System.Guid)">
            <summary>
            Create a filled out error record
            </summary>
            <param name="Record">The original error record</param>
            <param name="FunctionName">The function that wrote the error</param>
            <param name="Timestamp">When was the error generated</param>
            <param name="Message">What message was passed when writing the error</param>
            <param name="Runspace">The ID of the runspace writing the error. Used to separate output between different runspaces in the same process.</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.dbaSystem.DebugHost">
            <summary>
            Hosts static debugging values and methods
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.DebugHost.ImportTimeEntries">
            <summary>
            Lists the duration for the last import of dbatools.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.dbaSystem.DebugHost.ImportTime">
            <summary>
            Returns the calculated time each phase took during the last import of dbatool.
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.dbaSystem.StartTimeEntry">
            <summary>
            Entry containing the information of a step during the import sequence
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.dbaSystem.StartTimeEntry.Action">
            <summary>
            The action that has been taken
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.dbaSystem.StartTimeEntry.Timestamp">
            <summary>
            When was the action taken?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.StartTimeEntry.Runspace">
            <summary>
            The runspace the entry was written on
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.dbaSystem.StartTimeEntry.#ctor(System.String,System.DateTime,System.Guid)">
            <summary>
            Creates a new StartTimeEntry
            </summary>
            <param name="Action">The action that has been taken</param>
            <param name="Timestamp">When was the action taken?</param>
            <param name="Runspace">The runspace the entry was written on</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.dbaSystem.StartTimeResult">
            <summary>
            The processed result how long a given step took
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.dbaSystem.StartTimeResult.Action">
            <summary>
            What action was taken?
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.dbaSystem.StartTimeResult.Duration">
            <summary>
            How long did things take?
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.dbaSystem.StartTimeResult.Start">
            <summary>
            When did this action start?
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.dbaSystem.StartTimeResult.End">
            <summary>
            When did this action end?
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.dbaSystem.StartTimeResult.#ctor(System.String,System.DateTime,System.DateTime)">
            <summary>
            Creates a new StartTimeResult with all values preconfigured
            </summary>
            <param name="Action">The action that was taken</param>
            <param name="Start">When did the action start?</param>
            <param name="End">When did the action end?</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.dbaSystem.SystemHost">
            <summary>
            Provides system-wide static resources regarding the dbatools system runtime in general
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.SystemHost.UnattendedMode">
            <summary>
            When this is set to true, functions must assume dbatools is in unattended mode. May not ask for user input of any kind.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.dbaSystem.SystemHost.ModuleBase">
            <summary>
            Path where the module was located when imported
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.dbaSystem.SystemHost.ModuleImported">
            <summary>
            Flag whether the module has ever been imported in the current process. If that is true, several things (such as importing libraries) is no longer necessary and will be skipped on import.
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Discovery.DbaBrowserReply">
            <summary>
            The reply the browser service gave
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaBrowserReply.MachineName">
            <summary>
            The machine name of the computer
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaBrowserReply.ComputerName">
            <summary>
            the computername of the computer
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaBrowserReply.SqlInstance">
            <summary>
            The instance running on the computer
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaBrowserReply.InstanceName">
            <summary>
            The name of the instance, running on the computer
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaBrowserReply.TCPPort">
            <summary>
            The port number the instance is running under
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaBrowserReply.Version">
            <summary>
            The version of the SQL Server
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaBrowserReply.IsClustered">
            <summary>
            Whether the instance is part of a cluster or no.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Discovery.DbaBrowserReply.ToString">
            <summary>
            Override in order to make it look neater in PowerShell
            </summary>
            <returns></returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Discovery.DbaInstanceAvailability">
            <summary>
            Indiciator for whether an instance is known to be available or not
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceAvailability.Unknown">
            <summary>
            It is not known, whether the instance is available or not
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceAvailability.Available">
            <summary>
            The instance is known to be available
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceAvailability.Unavailable">
            <summary>
            The instance is known to be not available
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Discovery.DbaInstanceConfidenceLevel">
            <summary>
            How high is our confidence that this is a valid instance?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceConfidenceLevel.None">
            <summary>
            No confidence at all. There is virtually no way for this to be an instance
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceConfidenceLevel.Low">
            <summary>
            We have a few indications, but couldn't follow them up
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceConfidenceLevel.Medium">
            <summary>
            We're fairly sure this is legit, but can't guarantee it
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceConfidenceLevel.High">
            <summary>
            This absolutely is an instance
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Discovery.DbaInstanceDiscoveryType">
            <summary>
            What discovery mechanisms to use
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceDiscoveryType.IPRange">
            <summary>
            We shall sweep the network for instances, by targeting every IP within a range.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceDiscoveryType.Domain">
            <summary>
            We shall search for SQL SPNs in active directory
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceDiscoveryType.DataSourceEnumeration">
            <summary>
            We shall use the SSMS Data Sizrce Enumeration mechanism and hope for the best
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceDiscoveryType.All">
            <summary>
            We shall use all tools in our control to find stuff
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport">
            <summary>
            The report on a discovered instance
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.MachineName">
            <summary>
            The computername of the underlying machine. Usually equal to the computername, but may differ in case of clusters
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.ComputerName">
            <summary>
            The computername of the target
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.InstanceName">
            <summary>
            The name of the instance
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.FullName">
            <summary>
            The full server instance name
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.SqlInstance">
            <summary>
            The full name usable to connect via SMO
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.Port">
            <summary>
            The port number the server listens on
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.Timestamp">
            <summary>
            When the scan was concluded
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.TcpConnected">
            <summary>
            Was a TCP connect successful?
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.SqlConnected">
            <summary>
            Was a connection via SQL successful (even if we got access denied)
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.DnsResolution">
            <summary>
            The DNS Resolution object
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.Ping">
            <summary>
            The ping resolution object
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.BrowseReply">
            <summary>
            The reply received from the browse request
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.Services">
            <summary>
            The windows services for the instance
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.SystemServices">
            <summary>
            The SQL Server services that do not belong to that instance alone
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.SPNs">
            <summary>
            Service Principal Names found
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.PortsScanned">
            <summary>
            The ports that have been scanned
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.Availability">
            <summary>
            What we know about its availability
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.Confidence">
            <summary>
            How confident we are, that this is a real instance
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport.ScanTypes">
            <summary>
            What we used to scan the instance
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Discovery.DbaInstanceScanType">
            <summary>
            The mechanisms we use to determine, whether a given host contains a legit instance
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceScanType.TCPPort">
            <summary>
            Try connecting to specific ports
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceScanType.SqlConnect">
            <summary>
            Try to connect to discovered instances (improves confidence)
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceScanType.SqlService">
            <summary>
            Check the windows services on the target
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceScanType.DNSResolve">
            <summary>
            Try resolving a computername in DNS
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceScanType.SPN">
            <summary>
            Scan the SPNs for the targeted computer
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceScanType.Browser">
            <summary>
            Try contacting the local browser service and demand answers
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceScanType.Ping">
            <summary>
            See whether you can ping the host
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceScanType.All">
            <summary>
            Do EVERYTHING
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaInstanceScanType.Default">
            <summary>
            Do all the things we consider sane defaults
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Discovery.DbaPortReport">
            <summary>
            We tried to connect to a port, how did it go?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaPortReport.ComputerName">
            <summary>
            The name of the computer connected to
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaPortReport.Port">
            <summary>
            The number of the port we tried to connect to.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Discovery.DbaPortReport.IsOpen">
            <summary>
            Whether the port was open
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Discovery.DbaPortReport.#ctor">
            <summary>
            Creates an empty report (serialization uses this)
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Discovery.DbaPortReport.#ctor(System.String,System.Int32,System.Boolean)">
            <summary>
            Creates a filled in report
            </summary>
            <param name="ComputerName">The name of the computer connected to</param>
            <param name="Port">The port we tried to connect to</param>
            <param name="IsOpen">Whether things worked out</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Discovery.DbaPortReport.ToString">
            <summary>
            Displays port connection reports in a user friendly manner
            </summary>
            <returns></returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Exceptions.BloodyHellGiveMeSomethingToWorkWithException">
            <summary>
            An exception that is thrown by parameter classes when given empty input
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Exceptions.BloodyHellGiveMeSomethingToWorkWithException.ParameterClass">
            <summary>
            The parameter class that did the throwing
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Exceptions.BloodyHellGiveMeSomethingToWorkWithException.#ctor(System.String,System.Exception)">
            <summary>
            Creates an exception with a message and a nested exception
            </summary>
            <param name="Message">The message to tell</param>
            <param name="Inner">The inner exception to nest</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Exceptions.BloodyHellGiveMeSomethingToWorkWithException.#ctor(System.String,System.String)">
            <summary>
            Creates an exception with a message and a ParameterClass
            </summary>
            <param name="Message">The message to tell</param>
            <param name="ParameterClass">The Parameter Class that threw the exception</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Exceptions.BloodyHellGiveMeSomethingToWorkWithException.#ctor(System.String,System.Exception,System.String)">
            <summary>
            Creates an exception with a message, a nested exception and a ParameterClass
            </summary>
            <param name="Message">The message to tell</param>
            <param name="Inner">The inner exception to nest</param>
            <param name="ParameterClass">The Parameter Class that threw the exception</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.General.ExecutionMode">
            <summary>
            What kind of mode do you want to run a command in?
            This allows the user to choose how a dbatools function handles a bump in the execution where terminating directly may not be actually mandated.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.General.ExecutionMode.Strict">
            <summary>
            When encountering issues, terminate, or skip the currently processed input, rather than continue.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.General.ExecutionMode.Lazy">
            <summary>
            Continue as able with a best-effort attempt. Simple verbose output should do the rest.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.General.ExecutionMode.Report">
            <summary>
            Continue, but provide output that can be used to identify the operations that had issues.
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Maintenance.MaintenanceHost">
            <summary>
            Host class providing access to resources need to perform dbatools maintenance
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Maintenance.MaintenanceHost.Tasks">
            <summary>
            The register of available tasks.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Maintenance.MaintenanceHost.HasDueTasks">
            <summary>
            Whether there are any due tasks
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Maintenance.MaintenanceHost.GetNextTask(System.String[])">
            <summary>
            Returns the next task to perform. Returns null when there are no more tasks to perform
            </summary>
            <param name="Exclusions">List of tasks not to return, even if they are ready to execute again. This avoids one misconfigured task starving all lower priority tasks</param>
            <returns>The next task to perform.</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Maintenance.MaintenancePriority">
            <summary>
            How high the priority of the task. Higher priority tasks take precedence over low priority tasks.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Maintenance.MaintenancePriority.Trivial">
            <summary>
            This task is completely trivial and can be done whenever there is some spare time for it
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Maintenance.MaintenancePriority.Low">
            <summary>
            The task is not very significant, but should be dealt with at some point
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Maintenance.MaintenancePriority.Medium">
            <summary>
            Average priority task
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Maintenance.MaintenancePriority.High">
            <summary>
            An important task that will take precedence over most other tasks
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Maintenance.MaintenancePriority.Critical">
            <summary>
            A task so critical, that it should be considered to move it to synchronous execution instead.
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Maintenance.MaintenanceTask">
            <summary>
            An individual task assigned to the maintenance engine
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Maintenance.MaintenanceTask.Name">
            <summary>
            The name of the task to execute. No duplciates are possible.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Maintenance.MaintenanceTask.Once">
            <summary>
            Whether the task should be done once only
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Maintenance.MaintenanceTask.Interval">
            <summary>
            The interval at which the task should be performed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Maintenance.MaintenanceTask.Delay">
            <summary>
            If the task need not be performed right away, it can be delayed, in order to prioritize more important initialization tasks
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Maintenance.MaintenanceTask.Registered">
            <summary>
            When was the task first registered. Duplicate registration calls will not increment this value.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Maintenance.MaintenanceTask.LastExecution">
            <summary>
            When was the task last executed.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Maintenance.MaintenanceTask.Priority">
            <summary>
            How important is this task?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Maintenance.MaintenanceTask.ScriptBlock">
            <summary>
            The task code to execute
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Maintenance.MaintenanceTask.IsDue">
            <summary>
            Whether the task is due and should be executed
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Message.DbatoolsException">
            <summary>
            Wrapper class that can emulate any exception for purpose of serialization without blowing up the storage space consumed
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.DbatoolsException.GetException">
            <summary>
            Returns the original exception object that we interpreted. This is on purpose not a property, as we want to avoid messing with serialization size.
            </summary>
            <returns>The original exception that got thrown</returns>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.Message">
            <summary>
            The actual Exception Message
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.Source">
            <summary>
            The original source of the Exception
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.StackTrace">
            <summary>
            Where on the callstack did the exception occur?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.TargetSite">
            <summary>
            What was the target site on the code that caused it. This property has been altered to avoid export issues, if a string representation is not sufficient, access the original exception using GetException()
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.HResult">
            <summary>
            The HResult of the exception. Useful in debugging native code errors.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.HelpLink">
            <summary>
            Link to a proper help article.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.Data">
            <summary>
            Additional data that has been appended
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.InnerException">
            <summary>
            The inner exception in a chain of exceptions.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.ExceptionTypeName">
            <summary>
            The full namespace name of the exception that has been wrapped.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.ExceptionData">
            <summary>
            Contains additional properties other exceptions might contain.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.CategoryInfo">
            <summary>
            The category of the error
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.ErrorDetails">
            <summary>
            The details on the error
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.FullyQualifiedErrorId">
            <summary>
            The specific error identity, used to identify the target
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.InvocationInfo">
            <summary>
            The details of how this was called.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.ScriptStackTrace">
            <summary>
            The script's stacktrace
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.TargetObject">
            <summary>
            The object being processed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.FunctionName">
            <summary>
            The name of the function throwing the error
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.Timestamp">
            <summary>
            When was the error thrown
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.Runspace">
            <summary>
            The runspace the error occured on.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsException.ComputerName">
            <summary>
            The computer the error occured on.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.DbatoolsException.#ctor">
            <summary>
            Creates an empty exception object. Mostly for serialization support
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.DbatoolsException.#ctor(System.Exception)">
            <summary>
            Creates an exception based on an original exception object
            </summary>
            <param name="Except">The exception to wrap around</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.DbatoolsException.#ctor(System.Management.Automation.ErrorRecord)">
            <summary>
            Creates a rich information exception object based on a full error record as recorded by PowerShell
            </summary>
            <param name="Record">The error record to copy from</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.DbatoolsException.#ctor(System.Exception,System.String,System.DateTime,System.String,System.Guid,System.String)">
            <summary>
            Creates a new exception object with rich meta information from the PowerShell runtime.
            </summary>
            <param name="Except">The exception thrown</param>
            <param name="FunctionName">The name of the function in which the error occured</param>
            <param name="Timestamp">When did the error occur</param>
            <param name="Message">The message to add to the exception</param>
            <param name="Runspace">The ID of the runspace from which the exception was thrown. Useful in multi-runspace scenarios.</param>
            <param name="ComputerName">The computer the error occured on.</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.DbatoolsException.#ctor(System.Management.Automation.ErrorRecord,System.String,System.DateTime,System.String,System.Guid,System.String)">
            <summary>
            Creates a new exception object with rich meta information from the PowerShell runtime.
            </summary>
            <param name="Record">The error record written</param>
            <param name="FunctionName">The name of the function in which the error occured</param>
            <param name="Timestamp">When did the error occur</param>
            <param name="Message">The message to add to the exception</param>
            <param name="Runspace">The ID of the runspace from which the exception was thrown. Useful in multi-runspace scenarios.</param>
            <param name="ComputerName">The computer the error occured on.</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.DbatoolsException.ToString">
            <summary>
            Returns a string representation of the exception.
            </summary>
            <returns></returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Message.DbatoolsExceptionRecord">
            <summary>
            Carrier class, designed to hold an arbitrary number of exceptions. Used for exporting to XML in nice per-incident packages.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsExceptionRecord.Runspace">
            <summary>
            Runspace where shit happened.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsExceptionRecord.ComputerName">
            <summary>
            The computer name the exception was written on
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsExceptionRecord.Timestamp">
            <summary>
            When did things go bad?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsExceptionRecord.FunctionName">
            <summary>
            Name of the function, where fail happened.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsExceptionRecord.ModuleName">
            <summary>
            The module of the function where fail happened
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsExceptionRecord.Tags">
            <summary>
            The tags that were applied to the failure
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsExceptionRecord.Message">
            <summary>
            The message the poor user was shown.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.DbatoolsExceptionRecord.ExceptionType">
            <summary>
            Displays the name of the exception, the make scanning exceptions easier.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.DbatoolsExceptionRecord.TargetObject">
            <summary>
            The target object of the first exception in the list, if any
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.DbatoolsExceptionRecord.Exceptions">
            <summary>
            List of Exceptions that are part of the incident (usually - but not always - only one).
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.DbatoolsExceptionRecord.#ctor">
            <summary>
            Creates an empty container. Ideal for the homeworker who loves doing it all himself.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.DbatoolsExceptionRecord.#ctor(Sqlcollaborative.Dbatools.Message.DbatoolsException)">
            <summary>
            Creates a container filled with the first exception.
            </summary>
            <param name="Exception"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.DbatoolsExceptionRecord.#ctor(System.Guid,System.String,System.DateTime,System.String,System.String,System.Collections.Generic.List{System.String},System.String)">
            <summary>
            Creates a container filled with the meta information but untouched by exceptions
            </summary>
            <param name="Runspace">The runspace where it all happened</param>
            <param name="ComputerName">The computer the error was recorded</param>
            <param name="Timestamp">When did it happen?</param>
            <param name="FunctionName">Where did it happen?</param>
            <param name="ModuleName">The name of the module where fail happened</param>
            <param name="Tags">The tags that were assigned to the failure</param>
            <param name="Message">What did the witness have to say?</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Message.LogEntry">
            <summary>
            An individual entry for the message log
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntry.Message">
            <summary>
            The message logged
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntry.Type">
            <summary>
            What kind of entry was this?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntry.Timestamp">
            <summary>
            When was the message logged?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntry.FunctionName">
            <summary>
            What function wrote the message
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntry.ModuleName">
            <summary>
            The name of the module of the function that wrote the message
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntry.Tags">
            <summary>
            The tags applied to the message
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntry.Level">
            <summary>
            What level was the message?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntry.Runspace">
            <summary>
            What runspace was the message written from?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntry.ComputerName">
            <summary>
            The computer the message was generated on
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntry.TargetObject">
            <summary>
            The object that was the focus of this message.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntry.File">
            <summary>
            The file from which the message was written.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntry.Line">
            <summary>
            The line on which the message was written.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntry.CallStack">
            <summary>
            The callstack when the message was written.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntry.Username">
            <summary>
            The user that did the writing.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.LogEntry.#ctor">
            <summary>
            Creates an empty log entry
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.LogEntry.#ctor(System.String,Sqlcollaborative.Dbatools.Message.LogEntryType,System.DateTime,System.String,System.String,System.Collections.Generic.List{System.String},Sqlcollaborative.Dbatools.Message.MessageLevel,System.Guid,System.String,System.Object,System.String,System.Int32,System.Collections.Generic.IEnumerable{System.Management.Automation.CallStackFrame},System.String)">
            <summary>
            Creates a filled out log entry
            </summary>
            <param name="Message">The message that was logged</param>
            <param name="Type">The type(s) of message written</param>
            <param name="Timestamp">When was the message logged</param>
            <param name="FunctionName">What function wrote the message</param>
            <param name="ModuleName">Name of the module the function writing this message came from</param>
            <param name="Tags">Tags that were applied to the message</param>
            <param name="Level">What level was the message written at.</param>
            <param name="Runspace">The ID of the runspace that wrote the message.</param>
            <param name="ComputerName">The computer the message was generated on.</param>
            <param name="TargetObject">The object this message was all about.</param>
            <param name="File">The file of the code that wrote the message.</param>
            <param name="Line">The line on which the message was written.</param>
            <param name="CallStack">The callstack that triggered the write.</param>
            <param name="Username">The user responsible for running the code that is writing the message.</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Message.LogEntryType">
            <summary>
            The kind of information the logged entry was.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntryType.None">
            <summary>
            This entry wasn't written to any stream
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntryType.Information">
            <summary>
            A message that was written to the current host equivalent, if available also to the information stream
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntryType.Verbose">
            <summary>
            A message that was written to the verbose stream
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntryType.Debug">
            <summary>
            A message that was written to the Debug stream
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogEntryType.Warning">
            <summary>
            A message written to the warning stream
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Message.LogHost">
            <summary>
            Provides static information storage for logging related settings, as well as housing the logging queues.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogHost.MaxErrorCount">
            <summary>
            The maximum numbers of error records maintained in-memory.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogHost.MaxMessageCount">
            <summary>
            The maximum number of messages that can be maintained in the in-memory message queue
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogHost.MaxMessagefileBytes">
            <summary>
            The maximum size of a given logfile. When reaching this limit, the file will be abandoned and a new log created. Set to 0 to not limit the size.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogHost.MaxMessagefileCount">
            <summary>
            The maximum number of logfiles maintained at a time. Exceeding this number will cause the oldest to be culled. Set to 0 to disable the limit.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogHost.MaxErrorFileBytes">
            <summary>
            The maximum size all error files combined may have. When this number is exceeded, the oldest entry is culled.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogHost.MaxTotalFolderSize">
            <summary>
            This is the upper limit of length all items in the log folder may have combined across all processes.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogHost.LoggingPath">
            <summary>
            Path to where the logfiles live.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogHost.MaxLogFileAge">
            <summary>
            Any logfile older than this will automatically be cleansed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogHost.MessageLogFileEnabled">
            <summary>
            Governs, whether a log file for the system messages is written
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogHost.MessageLogEnabled">
            <summary>
            Governs, whether a log of recent messages is kept in memory
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogHost.ErrorLogFileEnabled">
            <summary>
            Governs, whether log files for errors are written
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogHost.ErrorLogEnabled">
            <summary>
            Governs, whether a log of recent errors is kept in memory
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogHost.OutQueueError">
            <summary>
            The outbound queue for errors. These will be processed and written to xml
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.LogHost.OutQueueLog">
            <summary>
            The outbound queue for logs. These will be processed and written to logfile
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.LogHost.GetErrors">
            <summary>
            Retrieves a copy of the Error stack
            </summary>
            <returns>All errors thrown by functions using the message or flowcontrol system</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.LogHost.GetLog">
            <summary>
            Retrieves a copy of the message log
            </summary>
            <returns>All messages logged this session.</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.LogHost.WriteErrorEntry(System.Management.Automation.ErrorRecord[],System.String,System.String,System.Collections.Generic.List{System.String},System.DateTime,System.String,System.Guid,System.String)">
            <summary>
            Write an error record to the log
            </summary>
            <param name="Record">The actual error record as powershell wrote it</param>
            <param name="FunctionName">The name of the function writing the error</param>
            <param name="ModuleName">The name of the module the function writing the error came from</param>
            <param name="Tags">The tags that were assigned to the error event</param>
            <param name="Timestamp">When was the error written</param>
            <param name="Message">What message was passed to the user</param>
            <param name="Runspace">The runspace the message was written from</param>
            <param name="ComputerName">The computer the error was written on</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.LogHost.WriteLogEntry(System.String,Sqlcollaborative.Dbatools.Message.LogEntryType,System.DateTime,System.String,System.String,System.Collections.Generic.List{System.String},Sqlcollaborative.Dbatools.Message.MessageLevel,System.Guid,System.String,System.String,System.Int32,System.Collections.Generic.IEnumerable{System.Management.Automation.CallStackFrame},System.String,System.Object)">
            <summary>
            Write a new entry to the log
            </summary>
            <param name="Message">The message to log</param>
            <param name="Type">The type of the message logged</param>
            <param name="Timestamp">When was the message generated</param>
            <param name="FunctionName">What function wrote the message</param>
            <param name="ModuleName">What module did the function writing this message come from?</param>
            <param name="Tags">The tags that were applied to the message</param>
            <param name="Level">At what level was the function written</param>
            <param name="Runspace">The runspace the message is coming from</param>
            <param name="ComputerName">The computer the message was generated on</param>
            <param name="File">The file from which the message was written</param>
            <param name="Line">The line on which the message was written</param>
            <param name="TargetObject">The object associated with a given message.</param>
            <param name="CallStack">The callstack at the moment the message was written.</param>
            <param name="Username">The name of the user under which the code being executed</param>
            <returns>The entry that is being written</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Message.MessageEventSubscription">
            <summary>
            Condition and logic to be executed on message events
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.Name">
            <summary>
            Name of the event subscription, must be unique.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.ScriptBlock">
            <summary>
            Scriptblock to execute if the condition is met
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageEventSubscription._MessageFilter">
            <summary>
            The internally stored filter value for Message
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.MessageFilter">
            <summary>
            The value the Message is filtered by
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.MessageFilterSet">
            <summary>
            Whether filtering by Message was enabled
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageEventSubscription._ModuleNameFilter">
            <summary>
            The internally stored filter value for ModuleName
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.ModuleNameFilter">
            <summary>
            The value the ModuleName is filtered by
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.ModuleNameFilterSet">
            <summary>
            Whether filtering by ModuleName was enabled
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageEventSubscription._FunctionNameFilter">
            <summary>
            The internally stored filter value for FunctionName
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.FunctionNameFilter">
            <summary>
            The value the FunctionName is filtered by
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.FunctionNameFilterSet">
            <summary>
            Whether filtering by FunctionName was enabled
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageEventSubscription._TargetFilter">
            <summary>
            The internally stored filter value for Target
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.TargetFilter">
            <summary>
            The value the Target is filtered by
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.TargetFilterSet">
            <summary>
            Whether filtering by Target was enabled
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageEventSubscription._LevelFilter">
            <summary>
            The internally stored filter value for Level
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.LevelFilter">
            <summary>
            The value the Level is filtered by
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.LevelFilterSet">
            <summary>
            Whether filtering by Level was enabled
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageEventSubscription._TagFilter">
            <summary>
            The internally stored filter value for Tag
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.TagFilter">
            <summary>
            The value the Tag is filtered by
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.TagFilterSet">
            <summary>
            Whether filtering by Tag was enabled
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageEventSubscription._RunspaceFilter">
            <summary>
            The internally stored filter value for Runspace
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.RunspaceFilter">
            <summary>
            The value the Runspace is filtered by
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.RunspaceFilterSet">
            <summary>
            Whether filtering by Runspace was enabled
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.MessageEventSubscription.Applies(Sqlcollaborative.Dbatools.Message.LogEntry)">
            <summary>
            Checks, whether a given entry matches the filter defined in this subscription
            </summary>
            <param name="Entry">The entry to validate</param>
            <returns>Whether the subscription should react to this entry</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Message.MessageHost">
            <summary>
            Provides static resources to the messaging subsystem
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.MaximumInformation">
            <summary>
            The maximum message level to still display to the user directly.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.MaximumVerbose">
            <summary>
            The maxium message level where verbose information is still written.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.MaximumDebug">
            <summary>
            The maximum message level where debug information is still written.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.MinimumInformation">
            <summary>
            The minimum required message level for messages that will be shown to the user.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.MinimumVerbose">
            <summary>
            The minimum required message level where verbose information is written.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.MinimumDebug">
            <summary>
            The minimum required message level where debug information is written.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.InfoColor">
            <summary>
            The color stuff gets written to the console in
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.InfoColorEmphasis">
            <summary>
            The color important stuff gets written to the console in
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.InfoColorSubtle">
            <summary>
            The color background stuff gets written to the console in
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.DeveloperColor">
            <summary>
            The color stuff gets written to the console in, when developer mode is enabled and the message would not have been written after all
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.DeveloperMode">
            <summary>
            Enables the developer mode. In this all messages are written to the console, in order to make it easier to troubleshoot issues.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.NestedLevelDecrement">
            <summary>
            Message levels can decrease by nested level. This causes messages to have an increasingly reduced level as the size of the callstack increases. 
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.DisableVerbosity">
            <summary>
            Globally override all verbosity
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.EnableMessageTimestamp">
            <summary>
            Include message timestamps in verbose message output
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.EnableMessageDisplayCommand">
            <summary>
            Include the message display command in the verbose message output
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.EnableMessageBreadcrumbs">
            <summary>
            Include the entire callstack in the verbose message output
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.TransformErrorQueueSize">
            <summary>
            The size of the transform error queue. When adding more than this, the oldest entry will be discarded
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.ExceptionTransforms">
            <summary>
            Provides the option to transform exceptions based on the original exception type
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.TargetTransforms">
            <summary>
            Provides the option to transform target objects based on type. This is sometimes important when working with live state objects that should not be serialized.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.TransformErrors">
            <summary>
            The list of transformation errors that occured.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.MessageHost.GetTransformErrors">
            <summary>
            Returns the current queue of failed transformations
            </summary>
            <returns>The list of transformations that failed</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.MessageHost.WriteTransformError(System.Management.Automation.ErrorRecord,System.String,System.String,System.Object,Sqlcollaborative.Dbatools.Message.TransformType,System.Guid)">
            <summary>
            Writes a new transform error
            </summary>
            <param name="Record">The record of what went wrong</param>
            <param name="FunctionName">The name of the function writing the transformed message</param>
            <param name="ModuleName">The module the function writing the transformed message is part of</param>
            <param name="Object">The object that should have been transformed</param>
            <param name="Type">The type of transform that was attempted</param>
            <param name="Runspace">The runspace it all happened on</param>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.ExceptionTransformList">
            <summary>
            List of custom transforms for exceptions
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.TargetTransformlist">
            <summary>
            List of custom transforms for targets
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.MessageLevelModifiers">
            <summary>
            List of all modifiers that apply to message levels
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageHost.Events">
            <summary>
            List of events that subscribe to messages being written
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Message.MessageLevel">
            <summary>
            The various levels of verbosity available.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevel.Critical">
            <summary>
            Very important message, should be shown to the user as a high priority
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevel.Important">
            <summary>
            Important message, the user should read this
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevel.Output">
            <summary>
            Important message, the user should read this
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevel.Significant">
            <summary>
            Message relevant to the user.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevel.VeryVerbose">
            <summary>
            Not important to the regular user, still of some interest to the curious
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevel.Verbose">
            <summary>
            Background process information, in case the user wants some detailed information on what is currently happening.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevel.SomewhatVerbose">
            <summary>
            A footnote in current processing, rarely of interest to the user
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevel.System">
            <summary>
            A message of some interest from an internal system persepctive, but largely irrelevant to the user.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevel.Debug">
            <summary>
            Something only of interest to a debugger
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevel.InternalComment">
            <summary>
            This message barely made the cut from being culled. Of purely development internal interest, and even there is 'interest' a strong word for it.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevel.Warning">
            <summary>
            This message is a warning, sure sign something went badly wrong
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Message.MessageLevelModifier">
            <summary>
            A modification to a given message's level
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevelModifier.Name">
            <summary>
            Name of the modifier. Prevents duplication in a multi-runspace scenario.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevelModifier.Modifier">
            <summary>
            The amount to modify the level by
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevelModifier.IncludeFunctionName">
            <summary>
            Apply modifier only to messages from this function.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevelModifier.ExcludeFunctionName">
            <summary>
            Apply modifier not when the message is written by this function.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevelModifier.IncludeModuleName">
            <summary>
            Apply modifier only to messages from this module
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevelModifier.ExcludeModuleName">
            <summary>
            Do not apply modifier to messages from this module
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevelModifier.IncludeTags">
            <summary>
            Only apply this modifier to a message that includes at least one of these tags
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.MessageLevelModifier.ExcludeTags">
            <summary>
            Do not apply this modifier to a message that includes any of the following tags
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.MessageLevelModifier.AppliesTo(System.String,System.String,System.Collections.Generic.List{System.String})">
            <summary>
            Tests, whether a message a message should be modified by this modiier
            </summary>
            <param name="FunctionName">The name of the function writing the message</param>
            <param name="ModuleName">The name of the module, the function writing this message comes from</param>
            <param name="Tags">The tags of the message written</param>
            <returns>Whether the message applies</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Message.TransformCondition">
            <summary>
            A condition, under which the object shall be transaformed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.TransformCondition.TypeName">
            <summary>
            Name of the type. All similar types (as determined by the '-like' operator) will be transformed.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.TransformCondition.ModuleName">
            <summary>
            The name of the module to consider, using the -Like operator
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.TransformCondition.FunctionName">
            <summary>
            The name of the function name to consider, using the -Like operator
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.TransformCondition.ScriptBlock">
            <summary>
            The scriptblock that performs the transformation
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.TransformCondition.Type">
            <summary>
            What kind of transformation is being performed?
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.TransformCondition.#ctor(System.String,System.String,System.String,System.Management.Automation.ScriptBlock,Sqlcollaborative.Dbatools.Message.TransformType)">
            <summary>
            Initializes a transform condition
            </summary>
            <param name="TypeName">Only objects of similar name will be transformed</param>
            <param name="ModuleName">Only objects coming from similar modules will be considered</param>
            <param name="FunctionName">Only objects coming from similar functions will be considered</param>
            <param name="ScriptBlock">The scriptblock used for the transformation</param>
            <param name="Type">What kind of transformation this is</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Message.TransformError">
            <summary>
            An error occured during a message transformation
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.TransformError.Record">
            <summary>
            The error record of what went wrong
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.TransformError.FunctionName">
            <summary>
            The name of the function writing the message that failed to transform
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.TransformError.ModuleName">
            <summary>
            The name of the module the command writing the message came from
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.TransformError.Timestamp">
            <summary>
            When did it all happen?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.TransformError.Object">
            <summary>
            The object that was supposed to be transformed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.TransformError.Type">
            <summary>
            The kind of transform that failed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.TransformError.Runspace">
            <summary>
            The runspace it all happened on
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.TransformError.#ctor(System.Management.Automation.ErrorRecord,System.String,System.String,System.Object,Sqlcollaborative.Dbatools.Message.TransformType,System.Guid)">
            <summary>
            Creates a new transform error
            </summary>
            <param name="Record">The record of what went wrong</param>
            <param name="FunctionName">The name of the function writing the transformed message</param>
            <param name="ModuleName">The module the function writing the transformed message is part of</param>
            <param name="Object">The object that should have been transformed</param>
            <param name="Type">The type of transform that was attempted</param>
            <param name="Runspace">The runspace it all happened on</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Message.TransformList">
            <summary>
            List engine, managing the lists for a message transformation type
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.TransformList.GetAll">
            <summary>
            Returns all entries in the list.
            </summary>
            <returns>The list of transforms contained within</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.TransformList.IsListed(Sqlcollaborative.Dbatools.Message.TransformCondition)">
            <summary>
            Returns whether the actual object is part of the list
            </summary>
            <param name="Condition">The object to test for list membership</param>
            <returns>Whether the object is listed</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.TransformList.IsContained(Sqlcollaborative.Dbatools.Message.TransformCondition)">
            <summary>
            Returns whether a condition with equal conditions already exists
            </summary>
            <param name="Condition">The condition to test</param>
            <returns>Whether the referenced condition is already listed</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.TransformList.Add(Sqlcollaborative.Dbatools.Message.TransformCondition)">
            <summary>
            Adds a condition to the list, if there is no equivalent condition present.
            </summary>
            <param name="Condition">The condition to add</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.TransformList.Remove(Sqlcollaborative.Dbatools.Message.TransformCondition)">
            <summary>
            Removes a condition from the lsit of conditional transforms
            </summary>
            <param name="Condition">The condition to remove</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Message.TransformList.Get(System.String,System.String,System.String)">
            <summary>
            Returns the first transform whose filter is similar enough to work out.
            </summary>
            <param name="TypeName">The name of the type to check for a transform</param>
            <param name="ModuleName">The module of the command that wrote the message with the transformable object</param>
            <param name="Functionname">The command that wrote the message with the transformable object</param>
            <returns>Either a transform or null, if no fitting transform was found</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Message.TransformType">
            <summary>
            The messaging system provides these kinds of transformations for input.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.TransformType.Target">
            <summary>
            A target transform can transform the target object specified. Used for live-state objects that should not be serialized on a second thread.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Message.TransformType.Exception">
            <summary>
            An exception transform allows automatic transformation of exceptions. Primarily used to unwrap exceptions from an API that wraps all exceptions.
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Parameter.DbaCmConnectionParameter">
            <summary>
            Input converter for Computer Management Information
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaCmConnectionParameter.Connection">
            <summary>
            The resolved connection object
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaCmConnectionParameter.Success">
            <summary>
            Whether input processing was successful
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaCmConnectionParameter.InputObject">
            <summary>
            The object actually passed to the class
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCmConnectionParameter.op_Implicit(Sqlcollaborative.Dbatools.Parameter.DbaCmConnectionParameter)~Sqlcollaborative.Dbatools.Connection.ManagementConnection">
            <summary>
            Implicitly convert all connection parameter objects to the connection-type
            </summary>
            <param name="Input">The parameter object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCmConnectionParameter.#ctor(System.String)">
            <summary>
            Creates a new DbaWmConnectionParameter based on an input-name
            </summary>
            <param name="ComputerName">The name of the computer the connection is stored for.</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCmConnectionParameter.#ctor(Sqlcollaborative.Dbatools.Connection.ManagementConnection)">
            <summary>
            Creates a new DbaWmConnectionParameter based on an already existing connection object.
            </summary>
            <param name="Connection">The connection to accept</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCmConnectionParameter.#ctor(System.Object)">
            <summary>
            Tries to convert a generic input object into a true input.
            </summary>
            <param name="Input">Any damn object in the world</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCmConnectionParameter.#ctor(Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter)">
            <summary>
            Creates a new DbaCmConnectionParameter based on an instance parameter
            </summary>
            <param name="Instance">The instance to interpret</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter">
            <summary>
            Parameter class that handles the various kinds of credential input
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.Credential">
            <summary>
            The credential object received
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.UserName">
            <summary>
            The name of the credential object
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.Password">
            <summary>
            The password of the credential object
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.#ctor(System.Management.Automation.PSCredential)">
            <summary>
            Creates a credential parameter from a PSCredential object
            </summary>
            <param name="Credential">A PSCredential object</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.#ctor(System.Net.NetworkCredential)">
            <summary>
            Creates a credential parameter from a NetworkCredential object
            </summary>
            <param name="Credential">The credentials to use</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.#ctor(System.Object)">
            <summary>
            Creates a credential parameter from anything it nows how to handle
            </summary>
            <param name="Credential">The object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.op_Implicit(Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter)~System.Management.Automation.PSCredential">
            <summary>
            Implicitly converts from DbaCredentialParameter to PSCredential
            </summary>
            <param name="Input">The DbaCredentialParameter to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.op_Implicit(System.Management.Automation.PSCredential)~Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter">
            <summary>
            Implicitly converts a PSCredential object to DbaCredenitalParameter
            </summary>
            <param name="Input">The PSCredential to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.op_Implicit(Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter)~System.Net.NetworkCredential">
            <summary>
            Implicitly converts from DbaCredentialParameter to NetworkCredential
            </summary>
            <param name="Input">The DbaCredentialParameter to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.op_Implicit(System.Net.NetworkCredential)~Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter">
            <summary>
            Implicitly converts a NetworkCredential object to DbaCredenitalParameter
            </summary>
            <param name="Input">The NetworkCredential to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.GetNetworkCredential">
            <summary>
            Legacy wrapper. While there exists implicit conversion, this allows using the object as before, avoiding errors for unknown method.
            </summary>
            <returns>A network credential object with the same credentials as the original object</returns>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.CredentialStore">
            <summary>
            Cached credentials, if the user stors them under a name.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.GetTypeCode">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToBoolean(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToChar(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToSByte(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToByte(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToInt16(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToUInt16(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToInt32(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToUInt32(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToInt64(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToUInt64(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToSingle(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToDouble(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToDecimal(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToDateTime(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToString(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="Format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaCredentialParameter.ToType(System.Type,System.IFormatProvider)">
            <summary>
            Tries to convert the credential parameter to one of its supported types
            </summary>
            <param name="TargetType">The type to convert to</param>
            <param name="Format">Irrelevant</param>
            <returns></returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Parameter.DbaDatabaseParameter">
            <summary>
            Parameter class that accepts anything pointing at a database
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaDatabaseParameter.InputObject">
            <summary>
            The original object passed to the parameter
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaDatabaseParameter.Database">
            <summary>
            The SMO Database Object
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaDatabaseParameter.Name">
            <summary>
            The name of the database
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaDatabaseParameter.#ctor(System.String)">
            <summary>
            Accepts the name of a database and converts it to a DbaDatabaseParameter
            </summary>
            <param name="Name"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaDatabaseParameter.#ctor(System.Object)">
            <summary>
            Accepts anything and tries to convert it to a live SMO Database object
            </summary>
            <param name="Item">The item to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaDatabaseParameter.ToString">
            <summary>
            Overrides the regular tostring to show something pleasant and useful
            </summary>
            <returns>The name of the database</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Parameter.DbaDatabaseSmoParameter">
            <summary>
            Parameter class that only accepts live SMO Databases
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaDatabaseSmoParameter.InputObject">
            <summary>
            The original object passed to the parameter
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaDatabaseSmoParameter.Database">
            <summary>
            The SMO Database Object
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaDatabaseSmoParameter.Name">
            <summary>
            The name of the database
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaDatabaseSmoParameter.#ctor(System.Object)">
            <summary>
            Accepts anything and tries to convert it to a live SMO Database object
            </summary>
            <param name="Item">The item to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaDatabaseSmoParameter.ToString">
            <summary>
            Overrides the regular tostring to show something pleasant and useful
            </summary>
            <returns>The name of the database</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Parameter.DbaInstanceInputType">
            <summary>
            What kind of object was bound to the parameter class?
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaInstanceInputType.Default">
            <summary>
            Anything, really. An unspecific not reusable type was bound
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaInstanceInputType.Linked">
            <summary>
            A live smo linked server object was bound
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaInstanceInputType.Server">
            <summary>
            A live smo server object was bound
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaInstanceInputType.RegisteredServer">
            <summary>
            A Central Management Server RegisteredServer SMO object was bound
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaInstanceInputType.ConnectionString">
            <summary>
            An actual connection string was specified. Connection strings are directly reused for SMO connections
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaInstanceInputType.ConnectionStringLocalDB">
            <summary>
            A connection string pointing at a local, file-based DB
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaInstanceInputType.SqlConnection">
            <summary>
            An already established sql connection to was created outside of SMO
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter">
            <summary>
            Input converter for instance information
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.ComputerName">
            <summary>
            Name of the computer as resolvable by DNS
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.InstanceName">
            <summary>
            Name of the instance on the target server
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.Port">
            <summary>
            The port over which to connect to the server. Only present if non-default
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.NetworkProtocol">
            <summary>
            The network protocol to connect over
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.IsLocalHost">
            <summary>
            Verifies, whether the specified computer is localhost or not.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.FullName">
            <summary>
            Full name of the instance, including the server-name
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.FullSmoName">
            <summary>
            Full name of the instance, including the server-name, used when connecting via SMO
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.SqlComputerName">
            <summary>
            Name of the computer as used in an SQL Statement
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.SqlInstanceName">
            <summary>
            Name of the instance as used in an SQL Statement
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.SqlFullName">
            <summary>
            Full name of the instance, including the server-name as used in an SQL statement
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.IsConnectionString">
            <summary>
            Whether the input is a connection string
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.InputObject">
            <summary>
            The original object passed to the parameter class.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.Type">
            <summary>
            What kind of object was bound to the parameter class? For efficiency's purposes.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.LinkedLive">
            <summary>
            Returns, whether a live SMO object was bound for the purpose of accessing LinkedServer functionality
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.LinkedServer">
            <summary>
            Returns the available Linked Server objects from live objects only
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.op_Implicit(Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter)~System.String">
            <summary>
            Converts the parameter class to its full name
            </summary>
            <param name="Input">The parameter class object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.#ctor(System.String)">
            <summary>
            Creates a DBA Instance Parameter from string
            </summary>
            <param name="Name">The name of the instance</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.#ctor(System.Net.IPAddress)">
            <summary>
            Creates a DBA Instance Parameter from an IPAddress
            </summary>
            <param name="Address"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.#ctor(System.Net.NetworkInformation.PingReply)">
            <summary>
            Creates a DBA Instance Parameter from the reply to a ping
            </summary>
            <param name="Ping">The result of a ping</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.#ctor(System.Net.IPHostEntry)">
            <summary>
            Creates a DBA Instance Parameter from the result of a dns resolution
            </summary>
            <param name="Entry">The result of a dns resolution, to be used for targetting the default instance</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.#ctor(System.Data.SqlClient.SqlConnection)">
            <summary>
            Creates a DBA Instance Parameter from an established SQL Connection
            </summary>
            <param name="Connection">The connection to reuse</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.#ctor(Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport)">
            <summary>
            Accept and understand discovery reports.
            </summary>
            <param name="Report">The report to interpret</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.#ctor(System.Object)">
            <summary>
            Creates a DBA Instance parameter from any object
            </summary>
            <param name="Input">Object to parse</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.ToString">
            <summary>
            Overrides the regular <c>ToString()</c> to show something pleasant and useful
            </summary>
            <returns>The <see cref="P:Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter.FullSmoName"/></returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Parameter.DbaSelectParameter">
            <summary>
            Class that automatically parses input chosen for the -Property parameter of Select-PSUObject
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaSelectParameter.InputObject">
            <summary>
            The original input object
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.DbaSelectParameter.Value">
            <summary>
            The value as Select-Object wants it
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaSelectParameter.#ctor(System.String)">
            <summary>
            Builds a property parameter from string
            </summary>
            <param name="Value">The string to interpret</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.DbaSelectParameter.#ctor(System.Collections.Hashtable)">
            <summary>
            Builds a select parameter from a hashtable (pretty straightforward)
            </summary>
            <param name="Hash">The hashtable to accept</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Parameter.ParameterContractAttribute">
            <summary>
            The attribute used to define the elements of a ParameterClass contract
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.ParameterContractAttribute.Type">
            <summary>
            Returns the type of the element this attribute is supposed to be attached to.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Parameter.ParameterContractAttribute.Behavior">
            <summary>
            Returns the behavior to expect from the contracted element. This sets the expectations on how this element is likely to act.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Parameter.ParameterContractAttribute.#ctor(Sqlcollaborative.Dbatools.Parameter.ParameterContractType,Sqlcollaborative.Dbatools.Parameter.ParameterContractBehavior)">
            <summary>
            Ceates a perfectly common parameter contract attribute. For use with all parameter classes' public elements.
            </summary>
            <param name="Type"></param>
            <param name="Behavior"></param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Parameter.ParameterContractBehavior">
            <summary>
            Defines how this element will behave
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.ParameterContractBehavior.NotContracted">
            <summary>
            This elements is not actually part of the contract. Generally you wouldn't want to add the attribute at all in that case. However, in some places it helps avoiding confusion.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.ParameterContractBehavior.Mandatory">
            <summary>
            This element may never be null and must be considered in all assignments. Even if the element is de facto not nullable, all constructors must assign it.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.ParameterContractBehavior.Optional">
            <summary>
            This element may contain data, but is not required to. In case of a method, it may simply do nothing
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.ParameterContractBehavior.Failable">
            <summary>
            This method may throw an error when executing and should always be handled with try/catch. Use this on methods that use external calls.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.ParameterContractBehavior.Arbiter">
            <summary>
            The content of the thus marked field determines the dependent's state. Generally, only if the arbiter is true, will the dependent elements be mandatory. This behavior may only be assigned to boolean fields.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.ParameterContractBehavior.Conditional">
            <summary>
            This behavior can be assigned together with the 'Mandatory' behavior. It means the field is only mandatory if an arbiter field is present and set to true.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.ParameterContractBehavior.Conversion">
            <summary>
            Converts content. Generally applied only to operators, but some methods may also convert information.
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Parameter.ParameterContractType">
            <summary>
            Defines what kind of element is granted the contract
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.ParameterContractType.Field">
            <summary>
            The contracted element is a field containing a value
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.ParameterContractType.Method">
            <summary>
            The contracted element is a method, performing an action
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Parameter.ParameterContractType.Operator">
            <summary>
            The contracted element is an operator, facilitating type conversion. Generally into a dedicated object type this parameterclass abstracts.
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Runspace.DbaRunspaceState">
            <summary>
            Contains the state a managed, unique runspace can be in.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Runspace.DbaRunspaceState.Running">
            <summary>
            The runspace is up and running
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Runspace.DbaRunspaceState.Stopping">
            <summary>
            The runspace has received the stop order, but has not yet obeyed it
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Runspace.DbaRunspaceState.Stopped">
            <summary>
            The runspace has followed its order to stop and is currently disabled
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Runspace.RunspaceContainer">
            <summary>
            Class that contains the logic necessary to manage a unique runspace
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Runspace.RunspaceContainer.Name">
            <summary>
            The name of the runspace.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Runspace.RunspaceContainer.RunspaceGuid">
            <summary>
            The Guid of the running Runspace
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Runspace.RunspaceContainer.SetScript(System.Management.Automation.ScriptBlock)">
            <summary>
            Sets the script to execute in the runspace. Will NOT take immediate effect. Only after restarting the runspace will it be used.
            </summary>
            <param name="Script">The scriptblock to execute</param>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Runspace.RunspaceContainer.State">
            <summary>
            The state the runspace currently is in.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Runspace.RunspaceContainer.Start">
            <summary>
            Starts the Runspace.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Runspace.RunspaceContainer.SetName(System.Management.Automation.Runspaces.Runspace)">
            <summary>
            Sets the name on a runspace. This WILL FAIL for PowerShell v3!
            </summary>
            <param name="Runspace">The runspace to be named</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Runspace.RunspaceContainer.Stop">
            <summary>
            Gracefully stops the Runspace
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Runspace.RunspaceContainer.Kill">
            <summary>
            Very ungracefully kills the runspace. Use only in the most dire emergency.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Runspace.RunspaceContainer.SignalStopped">
            <summary>
            Signals the registered runspace has stopped execution
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Runspace.RunspaceContainer.#ctor(System.String,System.Management.Automation.ScriptBlock)">
            <summary>
            Creates a new runspace container with the basic information needed
            </summary>
            <param name="Name">The name of the Runspace</param>
            <param name="Script">The code using the runspace logic</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Runspace.RunspaceHost">
            <summary>
            Provides hosting for all registered runspaces
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Runspace.RunspaceHost.StopTimeoutSeconds">
            <summary>
            The number of seconds before a Stop command is interrupted and instead the runspace is gracelessly shut down.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Runspace.RunspaceHost.Runspaces">
            <summary>
            The dictionary containing the definitive list of unique Runspace
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.TabExpansion.InstanceAccess">
            <summary>
            Contains information on access to an instance
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.InstanceAccess.InstanceName">
            <summary>
            The name of the instance to access
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.InstanceAccess.IsSysAdmin">
            <summary>
            Whether the account had sysadmin privileges. On multiple user usage, the cache will prefer sysadmin accounts.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.InstanceAccess.ConnectionObject">
            <summary>
            The actual connection object to connect with to the server
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.InstanceAccess.LastAccess">
            <summary>
            When was the instance last accessed using dbatools
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.InstanceAccess.LastUpdate">
            <summary>
            When was the instance's TEPP cache last updated
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.TabExpansion.ScriptContainer">
            <summary>
            Regular container to store scripts in, that are used in TEPP
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.ScriptContainer.Name">
            <summary>
            The name of the scriptblock
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.ScriptContainer.ScriptBlock">
            <summary>
            The scriptblock doing the logic
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.ScriptContainer.LastExecution">
            <summary>
            The last time the scriptblock was called. Must be updated by the scriptblock itself
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.ScriptContainer.LastDuration">
            <summary>
            The time it took to run the last time
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.TabExpansion.TabCompletionSet">
            <summary>
            Contains information used to transmit Tepp Assignment
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabCompletionSet.Command">
            <summary>
            The name of the command to complete. "*" if all commands that have the parameter should be selected instead
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabCompletionSet.Parameter">
            <summary>
            The parameter to complete
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabCompletionSet.Script">
            <summary>
            The name of the script to complete with
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.TabExpansion.TabCompletionSet.#ctor(System.String,System.String,System.String)">
            <summary>
            Creates a new tab completion set object with all information prefilled
            </summary>
            <param name="Command">The name of the command to complete. "*" if all commands that have the parameter should be selected instead</param>
            <param name="Parameter">The parameter to complete</param>
            <param name="Script">The name of the script to complete with</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.TabExpansion.TabCompletionSet.Applies(System.String,System.String)">
            <summary>
            Tests, whether the completion set applies to the specified parameter / command combination
            </summary>
            <param name="Command">The command to test</param>
            <param name="Parameter">The parameter of the command to test</param>
            <returns>Whether this completion set applies to the specified combination of parameter / command</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost">
            <summary>
            Class that handles the static fields supporting the dbatools TabExpansion implementation
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.Scripts">
            <summary>
            Field containing the scripts that were registered.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.Cache">
            <summary>
            The cache used by scripts utilizing TabExpansionPlusPlus in dbatools
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.InstanceAccess">
            <summary>
            List of instances and when they were last accessed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.TeppGatherScriptsFast">
            <summary>
            Scripts that build the cache and are suitable for synchronous execution
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.TeppGatherScriptsSlow">
            <summary>
            Scripts that build the cache and are not suitable for synchronous execution
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.DbatoolsCommands">
            <summary>
            A list of all commands imported into dbatools
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.TabCompletionSets">
            <summary>
            List of completion sets that should be processed into Tepp Assignments. Only populate this list on first import.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.TeppAssignment">
            <summary>
            Maps a TEPP scriptblock to a command and parameter
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.SetInstance(System.String,System.Object,System.Boolean)">
            <summary>
            Registers a new instance or updates an already existing one. Should only be called from Connect-SqlInstance and Connect-DbaSqlServer
            </summary>
            <param name="InstanceName">Name of the instance connected to</param>
            <param name="Connection">To connection object containing the relevant information for accessing the instance</param>
            <param name="IsSysAdmin">Whether the account connecting to the instnace has SA privileges</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.GetTeppScript(System.String,System.String)">
            <summary>
            Returns the assigned scriptblock for a given parameter
            </summary>
            <param name="Command">The command that should be completed</param>
            <param name="Parameter">The parameter completion is provided for</param>
            <returns>Either the relevant script container or null</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.SetTeppScript(System.String,System.String,System.String)">
            <summary>
            Assigns a registered script to the parameter of a command
            </summary>
            <param name="Command">The command for which to complete</param>
            <param name="Parameter">The parameter for which to complete</param>
            <param name="Script">To name of the script with which to complete</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.AddTabCompletionSet(System.String,System.String,System.String)">
            <summary>
            Adds a completion set to the list of items to process
            </summary>
            <param name="Command">The command to complete for (accepts wildcard matching)</param>
            <param name="Parameter">The parameter to complete for (accepts wildcard matching)</param>
            <param name="Script">The script to register</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.CalculateTabExpansion">
            <summary>
            Processes the content of TabCompletionSets and Scripts into TappAssignments based on the DbatoolsCommands list.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.TeppDisabled">
            <summary>
            Whether TEPP in its entirety is disabled
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.TeppAsyncDisabled">
            <summary>
            Whether asynchronous TEPP updating should be disabled
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.TeppSyncDisabled">
            <summary>
            Whether synchronous TEPP updating should be disabled
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.TeppUpdateInterval">
            <summary>
            The interval in which asynchronous TEPP cache updates are performed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost.TeppUpdateTimeout">
            <summary>
            After this timespan of no requests to a server, the updates to its cache are disabled.
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.TypeConversion.DbaCredentialParameterConverter">
            <summary>
            Converts to and from DbaCredentialparameter
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.TypeConversion.DbaCredentialParameterConverter.CanConvertTo(System.Object,System.Type)">
            <summary>
            Verifies, whether a conversion for the object to the target type is possible
            </summary>
            <param name="SourceValue">The object to convert</param>
            <param name="DestinationType">The type to convert to</param>
            <returns>Whether it's possible, duh!</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.TypeConversion.DbaCredentialParameterConverter.ConvertTo(System.Object,System.Type,System.IFormatProvider,System.Boolean)">
            <summary>
            Converts from DbaCredentialparameter to whatever destination type is attempted
            </summary>
            <param name="sourceValue">The source object. Better be a DbaCredentialparameter!</param>
            <param name="destinationType">Should be a supported destination type</param>
            <param name="formatProvider">Irrelevant</param>
            <param name="ignoreCase">Irrelevant</param>
            <returns>The target content type</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.TypeConversion.DbaCredentialParameterConverter.CanConvertFrom(System.Object,System.Type)">
            <summary>
            Verifies, whether a conversion for the object from the source type to DbaCredentialParameter is possible
            </summary>
            <param name="SourceValue">The object to convert</param>
            <param name="DestinationType">The source type to convert to</param>
            <returns>Whether it's possible, duh!</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.TypeConversion.DbaCredentialParameterConverter.ConvertFrom(System.Object,System.Type,System.IFormatProvider,System.Boolean)">
            <summary>
            Converts a source object to DbaCredentialparameter
            </summary>
            <param name="sourceValue">The source object</param>
            <param name="destinationType">The destination type. Must be DbaCredentialParameter, or red stuff happens</param>
            <param name="formatProvider">Irrelevant</param>
            <param name="ignoreCase">Irrelevant</param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.TypeConversion.DbaCredentialParameterConverter.IsSupportedType(System.Type)">
            <summary>
            Returns, whether a given type is supported for conversion
            </summary>
            <param name="type">The type to validate</param>
            <returns>Whether it's a supported conversion</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Utility.DateTimeExtension">
            <summary>
            Extends DateTime
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DateTimeExtension.CompareTo(System.DateTime,Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase)">
            <summary>
            Adds a compareTo method to DateTime to compare with DbaDateTimeBase
            </summary>
            <param name="Base">The extended DateTime object</param>
            <param name="comparedTo">The DbaDateTimeBase to compare with</param>
            <returns></returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Utility.DbaDate">
            <summary>
            A dbatools-internal datetime wrapper for neater display
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.#ctor(System.DateTime)">
            <summary>
            Constructs a generic timestamp object wrapper from an input timestamp object.
            </summary>
            <param name="Timestamp">The timestamp to wrap</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.#ctor(System.String)">
            <summary>
            Parses a string into a datetime object.
            </summary>
            <param name="Time">The time-string to parse</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.#ctor(System.Int64)">
            <summary>
            
            </summary>
            <param name="ticks"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.#ctor(System.Int64,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="ticks"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.#ctor(System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.#ctor(System.Int32,System.Int32,System.Int32,System.Globalization.Calendar)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="calendar"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Globalization.Calendar)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="calendar"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Globalization.Calendar)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
            <param name="calendar"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Globalization.Calendar,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
            <param name="calendar"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.ToString">
            <summary>
            Provids the default-formated string, using the defined default formatting.
            </summary>
            <returns>Formatted datetime-string</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.op_Implicit(Sqlcollaborative.Dbatools.Utility.DbaDate)~System.DateTime">
            <summary>
            Implicitly convert to DateTime
            </summary>
            <param name="Base">The source object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.op_Implicit(System.DateTime)~Sqlcollaborative.Dbatools.Utility.DbaDate">
            <summary>
            Implicitly convert from DateTime
            </summary>
            <param name="Base">The object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.op_Implicit(Sqlcollaborative.Dbatools.Utility.DbaDate)~Sqlcollaborative.Dbatools.Utility.DbaDateTime">
            <summary>
            Implicitly convert to DbaDate
            </summary>
            <param name="Base">The source object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.op_Implicit(Sqlcollaborative.Dbatools.Utility.DbaDate)~Sqlcollaborative.Dbatools.Utility.DbaTime">
            <summary>
            Implicitly convert to DbaTime
            </summary>
            <param name="Base">The source object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDate.Generate(System.DateTime)">
            <summary>
            Generates a DbaDate object based off DateTime object. Will be null if Base is the start value (Tickes == 0).
            </summary>
            <param name="Base">The Datetime to base it off</param>
            <returns>The object to generate (or null)</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Utility.DbaDateTime">
            <summary>
            A dbatools-internal datetime wrapper for neater display
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.#ctor(System.DateTime)">
            <summary>
            Constructs a generic timestamp object wrapper from an input timestamp object.
            </summary>
            <param name="Timestamp">The timestamp to wrap</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.#ctor(System.String)">
            <summary>
            Parses a string into a datetime object.
            </summary>
            <param name="Time">The time-string to parse</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.#ctor(System.Int64)">
            <summary>
            
            </summary>
            <param name="ticks"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.#ctor(System.Int64,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="ticks"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.#ctor(System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.#ctor(System.Int32,System.Int32,System.Int32,System.Globalization.Calendar)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="calendar"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Globalization.Calendar)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="calendar"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Globalization.Calendar)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
            <param name="calendar"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Globalization.Calendar,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
            <param name="calendar"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.ToString">
            <summary>
            Provids the default-formated string, using the defined default formatting.
            </summary>
            <returns>Formatted datetime-string</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.op_Implicit(Sqlcollaborative.Dbatools.Utility.DbaDateTime)~System.DateTime">
            <summary>
            Implicitly convert to DateTime
            </summary>
            <param name="Base">The source object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.op_Implicit(System.DateTime)~Sqlcollaborative.Dbatools.Utility.DbaDateTime">
            <summary>
            Implicitly convert from DateTime
            </summary>
            <param name="Base">The object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.op_Implicit(Sqlcollaborative.Dbatools.Utility.DbaDateTime)~Sqlcollaborative.Dbatools.Utility.DbaDate">
            <summary>
            Implicitly convert to DbaDate
            </summary>
            <param name="Base">The source object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.op_Implicit(Sqlcollaborative.Dbatools.Utility.DbaDateTime)~Sqlcollaborative.Dbatools.Utility.DbaTime">
            <summary>
            Implicitly convert to DbaTime
            </summary>
            <param name="Base">The source object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTime.Generate(System.DateTime)">
            <summary>
            Generates a DbaDateTime object based off DateTime object. Will be null if Base is the start value (Tickes == 0).
            </summary>
            <param name="Base">The Datetime to base it off</param>
            <returns>The object to generate (or null)</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase">
            <summary>
            Base class for wrapping around a DateTime object
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase._timestamp">
            <summary>
            The core resource, containing the actual timestamp
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Date">
            <summary>
            Gets the date component of this instance.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Day">
            <summary>
            Gets the day of the month represented by this instance.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.DayOfWeek">
            <summary>
            Gets the day of the week represented by this instance.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.DayOfYear">
            <summary>
            Gets the day of the year represented by this instance.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Hour">
            <summary>
            Gets the hour component of the date represented by this instance.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Kind">
            <summary>
            Gets a value that indicates whether the time represented by this instance is based on local time, Coordinated Universal Time (UTC), or neither.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Millisecond">
            <summary>
            Gets the milliseconds component of the date represented by this instance.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Minute">
            <summary>
            Gets the minute component of the date represented by this instance.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Month">
            <summary>
            Gets the month component of the date represented by this instance.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Second">
            <summary>
            Gets the seconds component of the date represented by this instance.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Ticks">
            <summary>
            Gets the number of ticks that represent the date and time of this instance.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.TimeOfDay">
            <summary>
            Gets the time of day for this instance.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Year">
            <summary>
            Gets the year component of the date represented by this instance.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.#ctor">
            <summary>
            Constructor that should never be called, since this class should never be instantiated. It's there for implicit calls on child classes.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.#ctor(System.DateTime)">
            <summary>
            Constructs a generic timestamp object wrapper from an input timestamp object.
            </summary>
            <param name="Timestamp">The timestamp to wrap</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.#ctor(System.String)">
            <summary>
            Parses a string into a datetime object.
            </summary>
            <param name="Time">The time-string to parse</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.#ctor(System.Int64)">
            <summary>
            
            </summary>
            <param name="ticks"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.#ctor(System.Int64,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="ticks"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.#ctor(System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.#ctor(System.Int32,System.Int32,System.Int32,System.Globalization.Calendar)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="calendar"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Globalization.Calendar)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="calendar"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Globalization.Calendar)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
            <param name="calendar"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Globalization.Calendar,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
            <param name="calendar"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Add(System.TimeSpan)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.AddDays(System.Double)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.AddHours(System.Double)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.AddMilliseconds(System.Double)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.AddMinutes(System.Double)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.AddMonths(System.Int32)">
            <summary>
            
            </summary>
            <param name="months"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.AddSeconds(System.Double)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.AddTicks(System.Int64)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.AddYears(System.Int32)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.CompareTo(System.Object)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.CompareTo(System.DateTime)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Equals(System.Object)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Equals(System.DateTime)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.GetDateTimeFormats">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.GetDateTimeFormats(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="provider"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.GetDateTimeFormats(System.Char)">
            <summary>
            
            </summary>
            <param name="format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.GetDateTimeFormats(System.Char,System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="format"></param>
            <param name="provider"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.GetBaseObject">
            <summary>
            Retrieve base DateTime object, this is a wrapper for
            </summary>
            <returns>Base DateTime object</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.GetHashCode">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.GetTypeCode">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.IsDaylightSavingTime">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Subtract(System.DateTime)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.Subtract(System.TimeSpan)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.ToBinary">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.ToFileTime">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.ToFileTimeUtc">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.ToLocalTime">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.ToLongDateString">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.ToLongTimeString">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.ToOADate">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.ToShortDateString">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.ToShortTimeString">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.ToString(System.String)">
            <summary>
            
            </summary>
            <param name="format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.ToString(System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="provider"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.ToString(System.String,System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="format"></param>
            <param name="provider"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.ToUniversalTime">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.ParseDateTime(System.String)">
            <summary>
            Parses input string into datetime
            </summary>
            <param name="Value">The string to parse</param>
            <returns>The resultant datetime.</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.op_Addition(Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase,System.TimeSpan)">
            <summary>
            
            </summary>
            <param name="Timestamp"></param>
            <param name="Duration"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.op_Subtraction(Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase,System.TimeSpan)">
            <summary>
            
            </summary>
            <param name="Timestamp"></param>
            <param name="Duration"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.op_Equality(Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase,Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase)">
            <summary>
            
            </summary>
            <param name="Timestamp1"></param>
            <param name="Timestamp2"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.op_Inequality(Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase,Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase)">
            <summary>
            
            </summary>
            <param name="Timestamp1"></param>
            <param name="Timestamp2"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.op_GreaterThan(Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase,Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase)">
            <summary>
            
            </summary>
            <param name="Timestamp1"></param>
            <param name="Timestamp2"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.op_LessThan(Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase,Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase)">
            <summary>
            
            </summary>
            <param name="Timestamp1"></param>
            <param name="Timestamp2"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.op_GreaterThanOrEqual(Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase,Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase)">
            <summary>
            
            </summary>
            <param name="Timestamp1"></param>
            <param name="Timestamp2"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.op_LessThanOrEqual(Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase,Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase)">
            <summary>
            
            </summary>
            <param name="Timestamp1"></param>
            <param name="Timestamp2"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.op_Implicit(Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase)~System.DateTime">
            <summary>
            Implicitly convert DbaDateTimeBase to DateTime
            </summary>
            <param name="Base">The source object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase.op_Implicit(System.DateTime)~Sqlcollaborative.Dbatools.Utility.DbaDateTimeBase">
            <summary>
            Implicitly convert DateTime to DbaDateTimeBase
            </summary>
            <param name="Base">The object to convert</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Utility.DbaTime">
            <summary>
            A dbatools-internal datetime wrapper for neater display
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.#ctor(System.DateTime)">
            <summary>
            Constructs a generic timestamp object wrapper from an input timestamp object.
            </summary>
            <param name="Timestamp">The timestamp to wrap</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.#ctor(System.String)">
            <summary>
            Parses a string into a datetime object.
            </summary>
            <param name="Time">The time-string to parse</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.#ctor(System.Int64)">
            <summary>
            
            </summary>
            <param name="ticks"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.#ctor(System.Int64,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="ticks"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.#ctor(System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.#ctor(System.Int32,System.Int32,System.Int32,System.Globalization.Calendar)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="calendar"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Globalization.Calendar)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="calendar"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Globalization.Calendar)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
            <param name="calendar"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Globalization.Calendar,System.DateTimeKind)">
            <summary>
            
            </summary>
            <param name="year"></param>
            <param name="month"></param>
            <param name="day"></param>
            <param name="hour"></param>
            <param name="minute"></param>
            <param name="second"></param>
            <param name="millisecond"></param>
            <param name="calendar"></param>
            <param name="kind"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.ToString">
            <summary>
            Provids the default-formated string, using the defined default formatting.
            </summary>
            <returns>Formatted datetime-string</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.op_Implicit(Sqlcollaborative.Dbatools.Utility.DbaTime)~System.DateTime">
            <summary>
            Implicitly convert to DateTime
            </summary>
            <param name="Base">The source object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.op_Implicit(System.DateTime)~Sqlcollaborative.Dbatools.Utility.DbaTime">
            <summary>
            Implicitly convert from DateTime
            </summary>
            <param name="Base">The object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.op_Implicit(Sqlcollaborative.Dbatools.Utility.DbaTime)~Sqlcollaborative.Dbatools.Utility.DbaDate">
            <summary>
            Implicitly convert to DbaDate
            </summary>
            <param name="Base">The source object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.op_Implicit(Sqlcollaborative.Dbatools.Utility.DbaTime)~Sqlcollaborative.Dbatools.Utility.DbaDateTime">
            <summary>
            Implicitly convert to DbaTime
            </summary>
            <param name="Base">The source object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.op_Implicit(Sqlcollaborative.Dbatools.Utility.DbaTime)~System.String">
            <summary>
            Implicitly convert to string
            </summary>
            <param name="Base">Object to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTime.Generate(System.DateTime)">
            <summary>
            Generates a DbaDateTime object based off DateTime object. Will be null if Base is the start value (Tickes == 0).
            </summary>
            <param name="Base">The Datetime to base it off</param>
            <returns>The object to generate (or null)</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan">
            <summary>
            A wrapper class, encapsuling a regular TimeSpan object. Used to provide custom timespan display.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.Days">
            <summary>
            Gets the days component of the time interval represented by the current TimeSpan structure.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.Hours">
            <summary>
            Gets the hours component of the time interval represented by the current TimeSpan structure.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.Milliseconds">
            <summary>
            Gets the milliseconds component of the time interval represented by the current TimeSpan structure.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.Minutes">
            <summary>
            Gets the minutes component of the time interval represented by the current TimeSpan structure.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.Seconds">
            <summary>
            Gets the seconds component of the time interval represented by the current TimeSpan structure.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.Ticks">
            <summary>
            Gets the number of ticks that represent the value of the current TimeSpan structure.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.TotalDays">
            <summary>
            Gets the value of the current TimeSpan structure expressed in whole and fractional days.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.TotalHours">
            <summary>
            Gets the value of the current TimeSpan structure expressed in whole and fractional hours.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.TotalMilliseconds">
            <summary>
            Gets the value of the current TimeSpan structure expressed in whole and fractional milliseconds.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.TotalMinutes">
            <summary>
            Gets the value of the current TimeSpan structure expressed in whole and fractional minutes.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.TotalSeconds">
            <summary>
            Gets the value of the current TimeSpan structure expressed in whole and fractional seconds.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.#ctor(System.TimeSpan)">
            <summary>
            
            </summary>
            <param name="Timespan"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.#ctor(System.String)">
            <summary>
            Converts a string into a timespan
            </summary>
            <param name="Timespan">The string to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.#ctor(System.Int64)">
            <summary>
            
            </summary>
            <param name="ticks"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.#ctor(System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="hours"></param>
            <param name="minutes"></param>
            <param name="seconds"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.#ctor(System.Int32,System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="days"></param>
            <param name="hours"></param>
            <param name="minutes"></param>
            <param name="seconds"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="days"></param>
            <param name="hours"></param>
            <param name="minutes"></param>
            <param name="seconds"></param>
            <param name="milliseconds"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.ParseTimeSpan(System.String)">
            <summary>
            Parses an input string as timespan
            </summary>
            <param name="Value">The string to interpret</param>
            <returns>The interpreted timespan value</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.Add(System.TimeSpan)">
            <summary>
            
            </summary>
            <param name="ts"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.CompareTo(System.Object)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.CompareTo(System.TimeSpan)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.CompareTo(Sqlcollaborative.Dbatools.Utility.DbaTimeSpan)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.Duration">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.Equals(System.Object)">
            <summary>
            
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.Equals(System.TimeSpan)">
            <summary>
            
            </summary>
            <param name="obj"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.GetBaseObject">
            <summary>
            Returns the wrapped base object
            </summary>
            <returns>The base object</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.GetHashCode">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.Negate">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.Subtract(System.TimeSpan)">
            <summary>
            
            </summary>
            <param name="ts"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.ToString">
            <summary>
            Returns the default string representation of the TimeSpan object
            </summary>
            <returns>The string representation of the DbaTimeSpan object</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.ToString(System.String)">
            <summary>
            
            </summary>
            <param name="format"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.ToString(System.String,System.IFormatProvider)">
            <summary>
            
            </summary>
            <param name="format"></param>
            <param name="formatProvider"></param>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.op_Implicit(Sqlcollaborative.Dbatools.Utility.DbaTimeSpan)~System.TimeSpan">
            <summary>
            Implicitly converts a DbaTimeSpan object into a TimeSpan object
            </summary>
            <param name="Base">The original object to revert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpan.op_Implicit(System.TimeSpan)~Sqlcollaborative.Dbatools.Utility.DbaTimeSpan">
            <summary>
            Implicitly converts a TimeSpan object into a DbaTimeSpan object
            </summary>
            <param name="Base">The original object to wrap</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Utility.DbaTimeSpanPretty">
            <summary>
            Makes timespan great again
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpanPretty.FromMilliseconds(System.Double)">
            <summary>
            Creates a new, pretty timespan object from milliseconds
            </summary>
            <param name="Milliseconds">The milliseconds to convert from.</param>
            <returns>A pretty timespan object</returns>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.DbaTimeSpanPretty.Digits">
            <summary>
            The number of digits a pretty timespan should round to.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpanPretty.#ctor(System.TimeSpan)">
            <summary>
            
            </summary>
            <param name="Timespan"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpanPretty.#ctor(System.String)">
            <summary>
            Converts a string into a timespan
            </summary>
            <param name="Timespan">The string to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpanPretty.#ctor(System.Int64)">
            <summary>
            
            </summary>
            <param name="ticks"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpanPretty.#ctor(System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="hours"></param>
            <param name="minutes"></param>
            <param name="seconds"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpanPretty.#ctor(System.Int32,System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="days"></param>
            <param name="hours"></param>
            <param name="minutes"></param>
            <param name="seconds"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpanPretty.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32)">
            <summary>
            
            </summary>
            <param name="days"></param>
            <param name="hours"></param>
            <param name="minutes"></param>
            <param name="seconds"></param>
            <param name="milliseconds"></param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaTimeSpanPretty.ToString">
            <summary>
            Creates extra-nice timespan formats
            </summary>
            <returns>Humanly readable timespans</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Utility.DbaValidatePatternAttribute">
            <summary>
            Validates that each parameter argument matches the RegexPattern
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaValidatePatternAttribute.RegexPattern">
            <summary>
            Gets the Regex pattern to be used in the validation
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaValidatePatternAttribute.Options">
            <summary>
            Gets or sets the Regex options to be used in the validation
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaValidatePatternAttribute.ErrorMessage">
             <summary>
             Gets or sets the custom error message pattern that is displayed to the user.
            
             The text representation of the object being validated and the validating regex is passed as
             the first and second formatting parameters to the ErrorMessage formatting pattern.
             <example>
             [ValidatePattern("\s+", ErrorMessage="The text '{0}' did not pass validation of regex '{1}'")]
             </example>
             </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaValidatePatternAttribute.ValidateElement(System.Object)">
            <summary>
            Validates that each parameter argument matches the RegexPattern
            </summary>
            <param name="element">object to validate</param>
            <exception cref="T:System.Management.Automation.ValidationMetadataException">if <paramref name="element"/> is not a string
             that matches the pattern
             and for invalid arguments</exception>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaValidatePatternAttribute.#ctor(System.String)">
            <summary>
            Initializes a new instance of the PsfValidatePatternAttribute class
            </summary>
            <param name="regexPattern">Pattern string to match</param>
            <exception cref="T:System.ArgumentException">for invalid arguments</exception>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Utility.DbaValidateScriptAttribute">
            <summary>
            Class for validating against a script block.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaValidateScriptAttribute.ErrorMessage">
             <summary>
             Gets or sets the custom error message that is displayed to the user.
            
             The item being validated and the validating scriptblock is passed as the first and second
             formatting argument.
            
             <example>
             [ValidateScript("$_ % 2", ErrorMessage = "The item '{0}' did not pass validation of script '{1}'")]
             </example>
             </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.DbaValidateScriptAttribute.ScriptBlock">
            <summary>
            Gets the scriptblock to be used in the validation
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaValidateScriptAttribute.ValidateElement(System.Object)">
            <summary>
            Validates that each parameter argument matches the scriptblock
            </summary>
            <param name="element">object to validate</param>
            <exception cref="T:System.Management.Automation.ValidationMetadataException">if <paramref name="element"/> is invalid</exception>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.DbaValidateScriptAttribute.#ctor(System.Management.Automation.ScriptBlock)">
            <summary>
            Initializes a new instance of the ValidateScriptBlockAttribute class
            </summary>
            <param name="scriptBlock">Scriptblock to match</param>
            <exception cref="T:System.ArgumentException">for invalid arguments</exception>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Utility.RegexHelper">
            <summary>
            Static class that holds useful regex patterns, ready for use
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.HostName">
            <summary>
            Pattern that checks for a valid hostname
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.HostNameEx">
            <summary>
            Pattern that checks for valid hostnames within a larger text
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.IPv4">
            <summary>
            Pattern that checks for a valid IPv4 address
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.IPv4Ex">
            <summary>
            Pattern that checks for valid IPv4 addresses within a larger text
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.IPv6">
            <summary>
            Will match a valid IPv6 address
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.IPv6Ex">
            <summary>
            Will match any IPv6 address within a larger text
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.ComputerTarget">
            <summary>
            Will match any string that in its entirety represents a valid target for dns- or ip-based targeting. Combination of HostName, IPv4 and IPv6
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.Guid">
            <summary>
            Will match a valid Guid
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.GuidEx">
            <summary>
            Will match any number of valid Guids in a larger text
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.InstanceName">
            <summary>
            Will match a mostly valid instance name.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.InstanceNameEx">
            <summary>
            Will match any instance of a mostly valid instance name.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.SqlReservedKeyword">
            <summary>
            Matches a word against the list of officially reserved keywords
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.SqlReservedKeywordEx">
            <summary>
            Will match any reserved keyword in a larger text
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.SqlReservedKeywordOdbc">
            <summary>
            Matches a word against the list of officially reserved keywords for odbc
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.SqlReservedKeywordOdbcEx">
            <summary>
            Will match any reserved odbc-keyword in a larger text
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.SqlReservedKeywordFuture">
            <summary>
            Matches a word against the list of keywords that are likely to become reserved in the future
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.RegexHelper.SqlReservedKeywordFutureEx">
            <summary>
            Will match against the list of keywords that are likely to become reserved in the future and are used in a larger text
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Utility.Size">
            <summary>
            Class that reports File size.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.Size.Byte">
            <summary>
            Number of bytes contained in whatever object uses this object as a property
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.Size.Kilobyte">
            <summary>
            Kilobyte representation of the bytes
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.Size.Megabyte">
            <summary>
            Megabyte representation of the bytes
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.Size.Gigabyte">
            <summary>
            Gigabyte representation of the bytes
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.Size.Terabyte">
            <summary>
            Terabyte representation of the bytes
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.Size.Digits">
            <summary>
            Number if digits behind the dot.
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.Size.Style">
            <summary>
            How the size object should be displayed.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.ToString">
            <summary>
            Shows the default string representation of size
            </summary>
            <returns></returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.Equals(System.Object)">
            <summary>
            Simple equality test
            </summary>
            <param name="obj">The object to test it against</param>
            <returns>True if equal, false elsewise</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.GetHashCode">
            <inheritdoc cref="M:System.Int64.GetHashCode"/>
            <remarks>The hashcode of the underlying size</remarks>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.#ctor">
            <summary>
            Creates an empty size.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.#ctor(System.Int64)">
            <summary>
            Creates a size with some content
            </summary>
            <param name="Byte">The length in bytes to set the size to</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.CompareTo(Sqlcollaborative.Dbatools.Utility.Size)">
            <inheritdoc cref="M:System.IComparable`1.CompareTo(`0)"/>
            <remarks>For sorting</remarks>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.CompareTo(System.Object)">
            <inheritdoc cref="M:System.IComparable.CompareTo(System.Object)"/>
            <remarks>For sorting</remarks>
            <exception cref="T:System.ArgumentException">If you compare with something invalid.</exception>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.op_Addition(Sqlcollaborative.Dbatools.Utility.Size,Sqlcollaborative.Dbatools.Utility.Size)">
            <summary>
            Adds two sizes
            </summary>
            <param name="a">The first size to add</param>
            <param name="b">The second size to add</param>
            <returns>The sum of both sizes</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.op_Subtraction(Sqlcollaborative.Dbatools.Utility.Size,Sqlcollaborative.Dbatools.Utility.Size)">
            <summary>
            Substracts two sizes
            </summary>
            <param name="a">The first size to substract</param>
            <param name="b">The second size to substract</param>
            <returns>The difference between both sizes</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.op_Multiply(Sqlcollaborative.Dbatools.Utility.Size,System.Double)">
            <summary>
            Multiplies two sizes with each other
            </summary>
            <param name="a">The size to multiply</param>
            <param name="b">The size to multiply with</param>
            <returns>A multiplied size.</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.op_Division(Sqlcollaborative.Dbatools.Utility.Size,System.Double)">
            <summary>
            Divides one size by another. 
            </summary>
            <param name="a">The size to divide</param>
            <param name="b">The size to divide with</param>
            <returns>Divided size (note: Cut off)</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.op_Multiply(Sqlcollaborative.Dbatools.Utility.Size,Sqlcollaborative.Dbatools.Utility.Size)">
            <summary>
            Multiplies two sizes with each other
            </summary>
            <param name="a">The size to multiply</param>
            <param name="b">The size to multiply with</param>
            <returns>A multiplied size.</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.op_Division(Sqlcollaborative.Dbatools.Utility.Size,Sqlcollaborative.Dbatools.Utility.Size)">
            <summary>
            Divides one size by another.
            </summary>
            <param name="a">The size to divide</param>
            <param name="b">The size to divide with</param>
            <returns>Divided size (note: Cut off)</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.op_Implicit(System.Int32)~Sqlcollaborative.Dbatools.Utility.Size">
            <summary>
            Implicitly converts int to size
            </summary>
            <param name="a">The number to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.op_Implicit(System.Decimal)~Sqlcollaborative.Dbatools.Utility.Size">
            <summary>
            Implicitly converts int to size
            </summary>
            <param name="a">The number to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.op_Implicit(Sqlcollaborative.Dbatools.Utility.Size)~System.Int32">
            <summary>
            Implicitly converts size to int
            </summary>
            <param name="a">The size to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.op_Implicit(System.Int64)~Sqlcollaborative.Dbatools.Utility.Size">
            <summary>
            Implicitly converts long to size
            </summary>
            <param name="a">The number to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.op_Implicit(Sqlcollaborative.Dbatools.Utility.Size)~System.Int64">
            <summary>
            Implicitly converts size to long
            </summary>
            <param name="a">The size to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.op_Implicit(System.String)~Sqlcollaborative.Dbatools.Utility.Size">
            <summary>
            Implicitly converts string to size
            </summary>
            <param name="a">The string to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.op_Implicit(System.Double)~Sqlcollaborative.Dbatools.Utility.Size">
            <summary>
            Implicitly converts double to size
            </summary>
            <param name="a">The number to convert</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Size.op_Implicit(Sqlcollaborative.Dbatools.Utility.Size)~System.Double">
            <summary>
            Implicitly converts size to double
            </summary>
            <param name="a">The size to convert</param>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Utility.SizeStyle">
            <summary>
            How size objects should be displayed
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.SizeStyle.Dynamic">
            <summary>
            The size object is styled dependend on the number stored within.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.SizeStyle.Plain">
            <summary>
            The size object is shown as a plain number
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.SizeStyle.Byte">
            <summary>
            The size object is styled as a byte number
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.SizeStyle.Kilobyte">
            <summary>
            The size object is styled as a kilobyte number
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.SizeStyle.Megabyte">
            <summary>
            The size object is styled as a megabyte number
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.SizeStyle.Gigabyte">
            <summary>
            The size object is styled as a Gigabyte number
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.SizeStyle.Terabyte">
            <summary>
            The size object is styled as a Terabyte number
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Utility.UtilityHost">
            <summary>
            Provides static resources to utility-namespaced stuff
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.UtilityHost.DisableCustomDateTime">
            <summary>
            Restores all DateTime objects to their default display behavior
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.UtilityHost.DisableCustomTimeSpan">
            <summary>
            Restores all timespan objects to their default display behavior.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.UtilityHost.FormatDate">
            <summary>
            Formating string for date-style datetime objects.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.UtilityHost.FormatDateTime">
            <summary>
            Formating string for datetime-style datetime objects
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.UtilityHost.FormatTime">
            <summary>
            Formating string for time-style datetime objects
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.UtilityHost.SizeDigits">
            <summary>
            The number of digits a size object shows by default
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Utility.UtilityHost.SizeStyle">
            <summary>
            The way size objects are usually displayed
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.UtilityHost.IsLike(System.String,System.String,System.Boolean)">
            <summary>
            Implement's VB's Like operator logic.
            </summary>
            <param name="CaseSensitive">Whether the comparison is case sensitive</param>
            <param name="Pattern">The pattern the string is compared with</param>
            <param name="String">The string that is being compared with a pattern</param>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.UtilityHost.CompressString(System.String)">
            <summary>
            Compress string using default zip algorithms
            </summary>
            <param name="String">The string to compress</param>
            <returns>Returns a compressed string.</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.UtilityHost.ExpandString(System.String)">
            <summary>
            Expand a string using default zig algorithms
            </summary>
            <param name="CompressedString">The compressed string to expand</param>
            <returns>Returns an expanded string.</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.UtilityHost.CharListToSet(System.String)">
            <summary>
            Converts a string of characters to a HashSet of characters. If the string
            contains character ranges, such as A-Z, all characters in the range are
            also added to the returned set of characters.
            </summary>
            <param name="charList">Character list string</param>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.UtilityHost.Callstack">
            <summary>
            Returns the current callstack
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.UtilityHost._CallstackNew">
            <summary>
            Returns the current callstack on PS4+
            </summary>
        </member>
        <member name="P:Sqlcollaborative.Dbatools.Utility.UtilityHost._CallstackOld">
            <summary>
            Returns the current callstack on PS3
            </summary>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Utility.Validation">
            <summary>
            Provides helper methods that aid in validating stuff.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Validation.IsLocalhost(System.String)">
            <summary>
            Tests whether a given string is the local host.
            Does NOT use DNS resolution, DNS aliases will NOT be recognized!
            </summary>
            <param name="Name">The name to test for being local host</param>
            <returns>Whether the name is localhost</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Validation.IsRecommendedInstanceName(System.String)">
            <summary>
            Tests whether a given string is a recommended instance name. Recommended names musst be legal, nbot on the ODBC list and not on the list of words likely to become reserved keywords in the future.
            </summary>
            <param name="InstanceName">The name to test. MAY contain server name, but will NOT test the server.</param>
            <returns>Whether the name is recommended</returns>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Validation.IsValidComputerTarget(System.String)">
            <summary>
            Tests whether a given string is a valid target for targeting as a computer. Will first convert from idn name.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Utility.Validation.IsValidInstanceName(System.String,System.Boolean)">
            <summary>
            Tests whether a given string is a valid instance name.
            </summary>
            <param name="InstanceName">The name to test. MAY contain server name, but will NOT test the server.</param>
            <param name="Lenient">Setting this to true will make the validation ignore default and mssqlserver as illegal names (as they are illegal names for named instances, but legal for targeting)</param>
            <returns>Whether the name is legal</returns>
        </member>
        <member name="T:Sqlcollaborative.Dbatools.Validation.LinkedServerResult">
            <summary>
            The results of testing linked server connectivity as seen from the server that was linked to.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Validation.LinkedServerResult.ComputerName">
            <summary>
            The name of the server running the tests
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Validation.LinkedServerResult.InstanceName">
            <summary>
            The name of the instance running the tests
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Validation.LinkedServerResult.SqlInstance">
            <summary>
            The full name of the instance running the tests
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Validation.LinkedServerResult.LinkedServerName">
            <summary>
            The name of the linked server, the connectivity with whom was tested
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Validation.LinkedServerResult.RemoteServer">
            <summary>
            The name of the remote computer running the linked server.
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Validation.LinkedServerResult.Connectivity">
            <summary>
            The test result
            </summary>
        </member>
        <member name="F:Sqlcollaborative.Dbatools.Validation.LinkedServerResult.Result">
            <summary>
            Text interpretation of the result. Contains error messages if the test failed.
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Validation.LinkedServerResult.#ctor">
            <summary>
            Creates an empty object
            </summary>
        </member>
        <member name="M:Sqlcollaborative.Dbatools.Validation.LinkedServerResult.#ctor(System.String,System.String,System.String,System.String,System.String,System.Boolean,System.String)">
            <summary>
            Creates a test result with prefilled values
            </summary>
            <param name="ComputerName">The name of the server running the tests</param>
            <param name="InstanceName">The name of the instance running the tests</param>
            <param name="SqlInstance">The full name of the instance running the tests</param>
            <param name="LinkedServerName">The name of the linked server, the connectivity with whom was tested</param>
            <param name="RemoteServer">The name of the remote computer running the linked server.</param>
            <param name="Connectivity">The test result</param>
            <param name="Result">Text interpretation of the result. Contains error messages if the test failed.</param>
        </member>
    </members>
</doc>

tools\dbatools\bin\smo\Microsoft.SqlServer.XEvent.Configuration.dll

md5: CA315AB021FAE0283195955A28B22273 | sha1: CA1A95C2785AB0201A9F1CDE582FFB3A6FE5D15D | sha256: E379B6DD301EFFBCCC0F22DF1C4AAAC146529ED86D5D3C1D1E2346B6B7555F23 | sha512: 02C109B03FA403EF7705295FC5182AADAB83D365546FC99E577F24CBBD7CF72467151FBC431B8783EE48B98BF095EFE84615F08971F3BE6220D473AC6FD85FA3

tools\dbatools\bin\smo\Microsoft.SqlServer.XEvent.dll

md5: EDD9944177424E14524D0B611374EF62 | sha1: 0D9AB9196D10D422CB653243A0F246899F1E34AD | sha256: BF8FBFCF1E48CD08E320DCBCCA0817E0CD6F2DB2F6FC330E196C28146DD32D94 | sha512: 349CA5C0B0CF16AEB232D38B1DFCD869F6954CADB73642E564AF63B7EB59159DFE5644E7FA9CABF762752644F26A9520F4E3397CC255BD4A49E9577B897C4CD3

tools\dbatools\bin\smo\Microsoft.SqlServer.XEvent.Linq.dll

md5: AE6A7A45C02F5E6CA119DB7FE2AE9823 | sha1: 565A2E3169B915289202F6E0134E35B51427D6EF | sha256: 47F4E5566A37AA9E2C295695D3AF5E4777240E25821746922477856AE207B778 | sha512: 808DB8F41D649E0156A66869083C0A35CB0BC726EB9E4B550B966AAB3CA2923531E6E57424DC0C4A40E70FF712A1E779E6721D4C80B092C71507018A9FB80DB9

tools\dbatools\bin\smo\smo-deps.txt

$phase1 = @()
$leftover = @()
dir | %{

 $file = $_
 try
 {
 Add-Type -Path $_.FullName -ErrorAction Stop
 $phase1 += $_.FullName
 }
 catch { $leftover += $file.FullName }
}

$dep = @()
dir | %{
    try { Add-Type -Path $_.FullName -ErrorAction Stop }
    catch { $_.Exception.LoaderExceptions.FileName | %{ $dep += $_ }}
}
$dep | select -unique

tools\dbatools\bin\smo\sqlpackage.exe

md5: 6C1C817073FB51447EF5097D4E1ED382 | sha1: 74C64BEE4897FF3CB0868C7A8F41CF86524B41B6 | sha256: A42C4410CF8448F59D3C6D4FD0E06DE5BC3005F7AF1D14401B83A6B706F5EC54 | sha512: EA49143B8EE1E65EF4414F3F38BA0424376C6DF147811C0CBD9FCDD81C451C6573C0FE27A98DB4CD79A89F5399FDEEC4FA19EB4E886251B023AFA78BAA12999F

tools\dbatools\bin\dbatools.pdb

tools\dbatools\bin\perfmontemplates\collectorsets\Long Running Queries.xml

<?xml version="1.0" encoding="UTF-16"?>
<DataCollectorSet>
	<Status>0</Status>
	<Duration>0</Duration>
	<Description>From Brad McGehee's article "Correlating SQL Server Profiler with Performance Monitor" on red-gate.com</Description>
	<DescriptionUnresolved>From Brad McGehee's article "Correlating SQL Server Profiler with Performance Monitor" on red-gate.com
	</DescriptionUnresolved>
	<DisplayName>Long Running Queries</DisplayName>
	<DisplayNameUnresolved>Long Running Queries</DisplayNameUnresolved>
	<SchedulesEnabled>-1</SchedulesEnabled>
	<LatestOutputLocation></LatestOutputLocation>
	<Name>Long Running Queries</Name>
	<OutputLocation></OutputLocation>
	<RootPath></RootPath>
	<Segment>0</Segment>
	<SegmentMaxDuration>0</SegmentMaxDuration>
	<SegmentMaxSize>0</SegmentMaxSize>
	<SerialNumber>3</SerialNumber>
	<Server>
	</Server>
	<Subdirectory>
	</Subdirectory>
	<SubdirectoryFormat>3</SubdirectoryFormat>
	<SubdirectoryFormatPattern>yyyyMMdd\-NNNNNN</SubdirectoryFormatPattern>
	<Task>
	</Task>
	<TaskRunAsSelf>0</TaskRunAsSelf>
	<TaskArguments>
	</TaskArguments>
	<TaskUserTextArguments>
	</TaskUserTextArguments>
	<UserAccount>SYSTEM</UserAccount>
	<Security></Security>
	<StopOnCompletion>0</StopOnCompletion>
	<PerformanceCounterDataCollector>
		<DataCollectorType>0</DataCollectorType>
		<Name>Long Running Queries Collector</Name>
		<FileName>Long Running Queries Collector</FileName>
		<FileNameFormat>1</FileNameFormat>
		<FileNameFormatPattern>
		</FileNameFormatPattern>
		<LogAppend>0</LogAppend>
		<LogCircular>0</LogCircular>
		<LogOverwrite>0</LogOverwrite>
		<LatestOutputLocation></LatestOutputLocation>
		<DataSourceName>
		</DataSourceName>
		<SampleInterval>15</SampleInterval>
		<SegmentMaxRecords>0</SegmentMaxRecords>
		<LogFileFormat>3</LogFileFormat>
		<Counter>\Memory\Available MBytes</Counter>
		<Counter>\Memory\Pages/sec</Counter>
		<Counter>\Processor(_Total)\% Processor Time</Counter>
		<Counter>\System\Processor Queue Length</Counter>
		<Counter>\LogicalDisk(*)\% Disk Read Time</Counter>
		<Counter>\LogicalDisk(*)\Avg. Disk Queue Length</Counter>
		<CounterDisplayName>\Memory\Available MBytes</CounterDisplayName>
		<CounterDisplayName>\Memory\Pages/sec</CounterDisplayName>
		<CounterDisplayName>\Processor(_Total)\% Processor Time</CounterDisplayName>
		<CounterDisplayName>\System\Processor Queue Length</CounterDisplayName>
		<CounterDisplayName>\LogicalDisk(*)\% Disk Read Time</CounterDisplayName>
		<CounterDisplayName>\LogicalDisk(*)\Avg. Disk Queue Length</CounterDisplayName>
	</PerformanceCounterDataCollector>
	<DataManager>
		<Enabled>0</Enabled>
		<CheckBeforeRunning>0</CheckBeforeRunning>
		<MinFreeDisk>0</MinFreeDisk>
		<MaxSize>0</MaxSize>
		<MaxFolderCount>0</MaxFolderCount>
		<ResourcePolicy>0</ResourcePolicy>
		<ReportFileName>report.html</ReportFileName>
		<RuleTargetFileName>report.xml</RuleTargetFileName>
		<EventsFileName>
		</EventsFileName>
	</DataManager>
</DataCollectorSet>

tools\dbatools\bin\perfmontemplates\collectorsets\PAL - SQL Server 2005.xml

<DataCollectorSet>
<Name>PAL - SQL Server 2005</Name>
<DisplayName>PAL - SQL Server 2005</DisplayName>
<DisplayNameUnresolved>PAL - SQL Server 2005</DisplayNameUnresolved>
<Description>Data Collector Sets from PAL, a performance monitor data aggregation tool by Microsoft. The toolset was created by Microsoft PFE Clint Huffman who worked with fellow experts to create a list specialized lists of counters. You can find the project at github.com/clinthuffman/PAL</Description>
<DescriptionUnresolved>Data Collector Sets from PAL, a performance monitor data aggregation tool by Microsoft. The toolset was created by Microsoft PFE Clint Huffman who worked with fellow experts to create a list specialized lists of counters. You can find the project at github.com/clinthuffman/PAL</DescriptionUnresolved>
<SubdirectoryFormat>3</SubdirectoryFormat>
<SubdirectoryFormatPattern>yyyyMMdd\-NNNNNN</SubdirectoryFormatPattern>
<PerformanceCounterDataCollector>
    <Name>PAL - SQL Server 2005 Collector</Name>
    <SampleInterval>15</SampleInterval>
    <Counter>\Cache\Dirty Pages</Counter>
    <Counter>\Cache\Lazy Write Flushes/sec</Counter>
    <Counter>\LogicalDisk(*)\% Free Space</Counter>
    <Counter>\LogicalDisk(*)\% Idle Time</Counter>
    <Counter>\LogicalDisk(*)\Avg. Disk Bytes/Read</Counter>
    <Counter>\LogicalDisk(*)\Avg. Disk Bytes/Transfer</Counter>
    <Counter>\LogicalDisk(*)\Avg. Disk Bytes/Write</Counter>
    <Counter>\LogicalDisk(*)\Avg. Disk Queue Length</Counter>
    <Counter>\LogicalDisk(*)\Avg. Disk sec/Read</Counter>
    <Counter>\LogicalDisk(*)\Avg. Disk sec/Transfer</Counter>
    <Counter>\LogicalDisk(*)\Avg. Disk sec/Write</Counter>
    <Counter>\LogicalDisk(*)\Current Disk Queue Length</Counter>
    <Counter>\LogicalDisk(*)\Disk Bytes/sec</Counter>
    <Counter>\LogicalDisk(*)\Disk Reads/sec</Counter>
    <Counter>\LogicalDisk(*)\Disk Transfers/sec</Counter>
    <Counter>\LogicalDisk(*)\Disk Writes/sec</Counter>
    <Counter>\LogicalDisk(*)\Free Megabytes</Counter>
    <Counter>\Memory\% Committed Bytes In Use</Counter>
    <Counter>\Memory\Available MBytes</Counter>
    <Counter>\Memory\Commit Limit</Counter>
    <Counter>\Memory\Committed Bytes</Counter>
    <Counter>\Memory\Free &amp; Zero Page List Bytes</Counter>
    <Counter>\Memory\Free System Page Table Entries</Counter>
    <Counter>\Memory\Long-Term Average Standby Cache Lifetime (s)</Counter>
    <Counter>\Memory\Pages Input/sec</Counter>
    <Counter>\Memory\Pages Output/sec</Counter>
    <Counter>\Memory\Pages/sec</Counter>
    <Counter>\Memory\Pool Nonpaged Bytes</Counter>
    <Counter>\Memory\Pool Paged Bytes</Counter>
    <Counter>\Memory\Pool Paged Resident Bytes</Counter>
    <Counter>\Memory\System Cache Resident Bytes</Counter>
    <Counter>\Memory\Transition Pages RePurposed/sec</Counter>
    <Counter>\Network Inspection System\Average inspection latency (sec/bytes)</Counter>
    <Counter>\Network Interface(*)\Bytes Received/sec</Counter>
    <Counter>\Network Interface(*)\Bytes Sent/sec</Counter>
    <Counter>\Network Interface(*)\Bytes Total/sec</Counter>
    <Counter>\Network Interface(*)\Current Bandwidth</Counter>
    <Counter>\Network Interface(*)\Output Queue Length</Counter>
    <Counter>\Network Interface(*)\Packets Outbound Errors</Counter>
    <Counter>\Network Interface(*)\Packets Received/sec</Counter>
    <Counter>\Network Interface(*)\Packets Sent/sec</Counter>
    <Counter>\Network Interface(*)\Packets/sec</Counter>
    <Counter>\Paging File(*)\% Usage</Counter>
    <Counter>\PhysicalDisk(*)\Avg. Disk Queue Length</Counter>
    <Counter>\PhysicalDisk(*)\Avg. Disk sec/Read</Counter>
    <Counter>\PhysicalDisk(*)\Avg. Disk sec/Write</Counter>
    <Counter>\PhysicalDisk(*)\Current Disk Queue Length</Counter>
    <Counter>\PhysicalDisk(*)\Disk Bytes/sec</Counter>
    <Counter>\Process(*)\% Processor Time</Counter>
    <Counter>\Process(*)\Handle Count</Counter>
    <Counter>\Process(*)\ID Process</Counter>
    <Counter>\Process(*)\IO Data Operations/sec</Counter>
    <Counter>\Process(*)\IO Other Operations/sec</Counter>
    <Counter>\Process(*)\IO Read Operations/sec</Counter>
    <Counter>\Process(*)\IO Write Operations/sec</Counter>
    <Counter>\Process(*)\Private Bytes</Counter>
    <Counter>\Process(*)\Thread Count</Counter>
    <Counter>\Process(*)\Virtual Bytes</Counter>
    <Counter>\Process(*)\Working Set</Counter>
    <Counter>\Process(sqlservr)\% Privileged Time</Counter>
    <Counter>\Processor Information(*)\% DPC Time</Counter>
    <Counter>\Processor Information(*)\% Interrupt Time</Counter>
    <Counter>\Processor Information(*)\% of Maximum Frequency</Counter>
    <Counter>\Processor Information(*)\% Privileged Time</Counter>
    <Counter>\Processor Information(*)\% Processor Time</Counter>
    <Counter>\Processor Information(*)\% User Time</Counter>
    <Counter>\Processor Information(*)\DPC Rate</Counter>
    <Counter>\Processor Information(*)\Parking Status</Counter>
    <Counter>\Processor(*)\% DPC Time</Counter>
    <Counter>\Processor(*)\% Interrupt Time</Counter>
    <Counter>\Processor(*)\% Privileged Time</Counter>
    <Counter>\Processor(*)\% Processor Time</Counter>
    <Counter>\Processor(*)\% User Time</Counter>
    <Counter>\Processor(*)\DPC Rate</Counter>
    <Counter>\Server\Pool Nonpaged Failures</Counter>
    <Counter>\Server\Pool Paged Failures</Counter>
    <Counter>\SQLServer:Access Methods\Forwarded Records/sec</Counter>
    <Counter>\SQLServer:Access Methods\FreeSpace Scans/sec</Counter>
    <Counter>\SQLServer:Access Methods\Full Scans/sec</Counter>
    <Counter>\SQLServer:Access Methods\Index Searches/sec</Counter>
    <Counter>\SQLServer:Access Methods\Page Splits/sec</Counter>
    <Counter>\SQLServer:Access Methods\Scan Point Revalidations/sec</Counter>
    <Counter>\SQLServer:Access Methods\Workfiles Created/sec</Counter>
    <Counter>\SQLServer:Access Methods\Worktables Created/sec</Counter>
    <Counter>\SQLServer:Buffer Manager\Buffer cache hit ratio</Counter>
    <Counter>\SQLServer:Buffer Manager\Checkpoint pages/sec</Counter>
    <Counter>\SQLServer:Buffer Manager\Free pages</Counter>
    <Counter>\SQLServer:Buffer Manager\Lazy writes/sec</Counter>
    <Counter>\SQLServer:Buffer Manager\Page life expectancy</Counter>
    <Counter>\SQLServer:Buffer Manager\Page lookups/sec</Counter>
    <Counter>\SQLServer:Buffer Manager\Page reads/sec</Counter>
    <Counter>\SQLServer:Buffer Manager\Page writes/sec</Counter>
    <Counter>\SQLServer:General Statistics\Logins/sec</Counter>
    <Counter>\SQLServer:General Statistics\Logouts/sec</Counter>
    <Counter>\SQLServer:General Statistics\User Connections</Counter>
    <Counter>\SQLServer:Latches\Latch Waits/sec</Counter>
    <Counter>\SQLServer:Latches\Total Latch Wait Time (ms)</Counter>
    <Counter>\SQLServer:Locks(*)\Lock Requests/sec</Counter>
    <Counter>\SQLServer:Locks(*)\Lock Timeouts/sec</Counter>
    <Counter>\SQLServer:Locks(*)\Lock Wait Time (ms)</Counter>
    <Counter>\SQLServer:Locks(*)\Lock Waits/sec</Counter>
    <Counter>\SQLServer:Locks(*)\Number of Deadlocks/sec</Counter>
    <Counter>\SQLServer:Memory Manager\Memory Grants Pending</Counter>
    <Counter>\SQLServer:Memory Manager\Target Server Memory(KB)</Counter>
    <Counter>\SQLServer:Memory Manager\Total Server Memory (KB)</Counter>
    <Counter>\SQLServer:SQL Statistics\Batch Requests/sec</Counter>
    <Counter>\SQLServer:SQL Statistics\SQL Compilations/sec</Counter>
    <Counter>\SQLServer:SQL Statistics\SQL Re-Compilations/sec</Counter>
    <Counter>\System\Context Switches/sec</Counter>
    <Counter>\System\Processor Queue Length</Counter>
    <Counter>\System\System Calls/sec</Counter>
    <Counter>\TCPv4\Connection Failures</Counter>
</PerformanceCounterDataCollector>
</DataCollectorSet>

tools\dbatools\bin\sqlcmd\Resources\1033\SQLCMD.rll

tools\dbatools\bin\sqlcmd\SQLCMD.EXE

md5: 6F9AA3F25E87B31393521111E53481B8 | sha1: 8EBCE101C98ECDD15F3471F4268D0B835DBDC485 | sha256: EB9153A1B0EEF429572DD798179FC9016482A647049737EC0F5F02D1054DC49C | sha512: F3B21E59006672CC16B2F84EECA3231CA8818A0EC691131165C736F5F9FD6CFA4EE038A5DE0532C2A1C41C5B994DDF8D5EFC3B990A663B4CB5891855B1EC7DBF

tools\dbatools\bin\stig.sql

USE tempdb;
                GO

                IF EXISTS (SELECT 1 FROM sys.schemas WHERE name = 'STIG')
                BEGIN
	                DROP SCHEMA STIG
                END
                GO

                CREATE SCHEMA STIG
                GO

            /*
            Objects defined in this file:

            VIEW STIG.database_role_members
                Based on the system view sys.database_role_members, this presents the list of
                database role memberships using roles' and users' names rather than their id numbers.
                Although membership in database roles is hierarchical, this view lists only the direct memberships.

            FUNCTION STIG.database_roles_of(@database_principal sysname)
                Given the name of a database principal (user or role), this table-valued function returns
                a list of all the roles it belongs to, both directly and indirectly.

            FUNCTION STIG.members_of_db_role(@database_role sysname)
                Given the name of a database role, this table-valued function returns
                a list of all the roles and users that belong to it, both directly and indirectly.

            VIEW STIG.database_permissions
                Based on the system view sys.database_permissions, this provides additional, descriptive material.
                The list includes only those permissions explicitly granted (or denied) to a database user or role;
                it does not include permissions that are implicit or inherited from a higher-level role.
                Securable items that exist but have no explicit permissions assigned are included in the
                list, with the columns that describe the grantor and grantee left null.

            FUNCTION STIG.database_effective_permissions(@Grantee sysname)
                Given the name of a database principal (user or role), this table-valued function 
                returns information about permissions granted (or denied) to that user or database role,
                either directly or inherited from a higher-level role.


            VIEW STIG.server_role_members
                Based on the system view sys.server_role_members, this presents the list of
                server role memberships using roles' and users' names rather than their id numbers.
                Although membership in server roles is hierarchical, this view lists only the direct memberships.

            FUNCTION STIG.server_roles_of(@server_principal sysname)
                Given the name of a server principal (login or role), this table-valued function returns
                a list of all the roles it belongs to, both directly and indirectly.

            FUNCTION STIG.members_of_server_role(@server_role sysname)
                Given the name of a server role, this table-valued function returns
                a list of all the roles and logins that belong to it, both directly and indirectly.

            VIEW STIG.server_permissions
                Based on the system view sys.server_permissions, this provides additional, descriptive material.
                The list includes only those permissions explicitly granted (or denied) to a server login or role;
                it does not include permissions that are implicit or inherited from a higher-level role.
                Securable items that exist but have no explicit permissions assigned are included in the
                list, with columns describing the grantor and grantee left null.

            FUNCTION STIG.server_effective_permissions(@Grantee sysname)
                Given the name of a server principal (login or server role), this table-valued function 
                returns information about permissions granted (or denied) to that login or role,
                either directly or inherited from a higher-level role.
            */


            BEGIN TRY DROP VIEW STIG.database_role_members END TRY BEGIN CATCH END CATCH;
            GO

            CREATE VIEW STIG.database_role_members
            --  Based on the system view sys.database_role_members, this presents the list of
            --  database role memberships using roles' and users' names rather than their id numbers.
            --  Although membership in database roles is hierarchical, this view lists only the direct memberships.
            AS SELECT
                R.name  AS [Role],
                M.name  AS [Member]
            FROM
                <TARGETDB>.sys.database_role_members X
                INNER JOIN <TARGETDB>.sys.database_principals R ON R.principal_id = X.role_principal_id
                INNER JOIN <TARGETDB>.sys.database_principals M ON M.principal_id = X.member_principal_id
            ;
            GO


            BEGIN TRY DROP FUNCTION STIG.database_roles_of END TRY BEGIN CATCH END CATCH;
            GO

            CREATE FUNCTION STIG.database_roles_of(@database_principal sysname)
            --  Membership in database roles is hierarchical.
            --  Given the name of a database principal (user or role), this table-valued function returns
            --  a list of all the roles it belongs to, both directly and indirectly.
                RETURNS @T TABLE
                    (
                    [Member]            sysname,
                    [Role]              sysname, 
                    [via Member]        sysname, 
                    [Membership Chain]  nvarchar(max)
                    )
            AS BEGIN;
                WITH Membership AS
                (
                SELECT
                    [Member] AS [Member],
                    [Role], 
                    [Member] AS [via Member], 
                    CAST([Member] AS varchar(max)) + ' < ' + CAST([Role] AS varchar(max)) AS [Membership Chain]
                FROM
                    STIG.database_role_members
                WHERE 
                    [Member] = @database_principal
    
                UNION ALL
    
                SELECT
                    X.[Member],
                    R.[Role],
                    R.[Member] AS [via Member],
                    X.[Membership Chain] + ' < ' + CAST(R.[Role] AS varchar(max)) AS [Membership Chain]
                FROM 
                    Membership X
                    INNER JOIN STIG.database_role_members R ON X.[Role] = R.[Member]
                )
                INSERT INTO @T SELECT * FROM Membership;
            ExitFunction:
                RETURN;
            END;
            GO


            BEGIN TRY DROP FUNCTION STIG.members_of_db_role END TRY BEGIN CATCH END CATCH;
            GO

            CREATE FUNCTION STIG.members_of_db_role(@database_role sysname)
            --  Membership in database roles is hierarchical.
            --  Given the name of a database role, this table-valued function returns
            --  a list of all the roles and users that belong to it, both directly and indirectly.
                RETURNS @T TABLE
                    (
                    [Role]              sysname,
                    [Member]            sysname,
                    [via Role]          sysname, 
                    [Membership Chain]  nvarchar(max)
                    )
            AS BEGIN;
                WITH Membership AS
                (
                SELECT
                    [Role] AS [Role],
                    [Member], 
                    [Role] AS [via Role], 
                    CAST([Role] AS varchar(max)) + ' > ' + CAST([Member] AS varchar(max)) AS [Membership Chain]
                FROM
                    STIG.database_role_members
                WHERE 
                    [Role] = @database_role

                UNION ALL

                SELECT
                    X.[Role] AS [Role],
                    R.[Member],
                    R.[Role] AS [via Role],
                    X.[Membership Chain] + ' > ' + CAST(R.[Member] AS varchar(max)) AS [Membership Chain]
                FROM 
                    Membership X
                    INNER JOIN STIG.database_role_members R ON X.[Member] = R.[Role]
                )
                INSERT INTO @T SELECT * FROM Membership;
            ExitFunction:
                RETURN;
            END;
            GO




            BEGIN TRY DROP VIEW STIG.database_permissions END TRY BEGIN CATCH END CATCH;
            GO

            CREATE VIEW STIG.database_permissions
            --  Based on the system view sys.database_permissions, this provides additional, descriptive material.
            --  The list includes only those permissions explicitly granted (or denied) to a database user or role;
            --  it does not include permissions that are implicit or inherited from a higher-level role.
            --  Securable items that exist but have no explicit permissions assigned are included in the
            --  list, with the columns that describe the grantor and grantee left null.
            AS SELECT DISTINCT
                @@SERVERNAME        AS [Current Server],
                @@SERVICENAME       AS [Current Instance],
                '<TARGETDB>'        AS [Current DB],
                SYSTEM_USER         AS [Current Login],
                USER                AS [Current User],

                CASE
                    WHEN DP.class_desc = 'OBJECT_OR_COLUMN'             THEN CASE WHEN DP.minor_id > 0 THEN 'COLUMN' ELSE OB.type_desc END
                    WHEN DP.class_desc IS NOT NULL                      THEN DP.class_desc
                    WHEN DP.class_desc IS NULL AND DB.name IS NOT NULL  THEN 'DATABASE'
                    WHEN DP.class_desc IS NULL AND OB.name IS NOT NULL  THEN 'OBJECT_OR_COLUMN'
                    WHEN DP.class_desc IS NULL AND SC.name IS NOT NULL  THEN 'SCHEMA'
                    WHEN DP.class_desc IS NULL AND PR.name IS NOT NULL  THEN 'DATABASE_PRINCIPAL'
                    WHEN DP.class_desc IS NULL AND AY.name IS NOT NULL  THEN 'ASSEMBLY'
                    WHEN DP.class_desc IS NULL AND TP.name IS NOT NULL  THEN 'TYPE'
                    WHEN DP.class_desc IS NULL AND XS.name IS NOT NULL  THEN 'XML_SCHEMA_COLLECTION'
                    WHEN DP.class_desc IS NULL AND MT.name IS NOT NULL  THEN 'MESSAGE_TYPE'
                    WHEN DP.class_desc IS NULL AND VC.name IS NOT NULL  THEN 'SERVICE_CONTRACT'
                    WHEN DP.class_desc IS NULL AND SV.name IS NOT NULL  THEN 'SERVICE'
                    WHEN DP.class_desc IS NULL AND RS.name IS NOT NULL  THEN 'REMOTE_SERVICE_BINDING'
                    WHEN DP.class_desc IS NULL AND RT.name IS NOT NULL  THEN 'ROUTE'
                    WHEN DP.class_desc IS NULL AND FT.name IS NOT NULL  THEN 'FULLTEXT_CATALOG'
                    WHEN DP.class_desc IS NULL AND SK.name IS NOT NULL  THEN 'SYMMETRIC_KEY'
                    WHEN DP.class_desc IS NULL AND AK.name IS NOT NULL  THEN 'ASYMMETRIC_KEY'
                    WHEN DP.class_desc IS NULL AND CT.name IS NOT NULL  THEN 'CERTIFICATE'
                    ELSE NULL 
                END                 AS [Securable Type or Class],
                CASE
                    WHEN DP.class_desc = 'DATABASE'                     THEN PS.name
                    WHEN DP.class_desc = 'OBJECT_OR_COLUMN'             THEN schema_name(OB.schema_id)
                    WHEN DP.class_desc = 'SCHEMA'                       THEN P3.name
                    WHEN DP.class_desc = 'DATABASE_PRINCIPAL'           THEN coalesce(PR.default_schema_name, PE.name)
                    WHEN DP.class_desc = 'ASSEMBLY'                     THEN P4.name
                    WHEN DP.class_desc = 'TYPE'                         THEN schema_name(TP.schema_id)
                    WHEN DP.class_desc = 'XML_SCHEMA_COLLECTION'        THEN schema_name(XS.schema_id)
                    WHEN DP.class_desc = 'MESSAGE_TYPE'                 THEN P5.name 
                    WHEN DP.class_desc = 'SERVICE_CONTRACT'             THEN P6.name 
                    WHEN DP.class_desc = 'SERVICE'                      THEN P7.name 
                    WHEN DP.class_desc = 'REMOTE_SERVICE_BINDING'       THEN P8.name 
                    WHEN DP.class_desc = 'ROUTE'                        THEN P9.name
                    WHEN DP.class_desc = 'FULLTEXT_CATALOG'             THEN PA.name
                    WHEN DP.class_desc = 'SYMMETRIC_KEY'                THEN PB.name
                    WHEN DP.class_desc = 'ASYMMETRIC_KEY'               THEN PC.name
                    WHEN DP.class_desc = 'CERTIFICATE'                  THEN PD.name
                    WHEN DP.class_desc IS NULL AND DB.name IS NOT NULL  THEN PS.name
                    WHEN DP.class_desc IS NULL AND OB.name IS NOT NULL  THEN schema_name(OB.schema_id)
                    WHEN DP.class_desc IS NULL AND SC.name IS NOT NULL  THEN P3.name
                    WHEN DP.class_desc IS NULL AND PR.name IS NOT NULL  THEN PR.default_schema_name
                    WHEN DP.class_desc IS NULL AND AY.name IS NOT NULL  THEN P4.name
                    WHEN DP.class_desc IS NULL AND TP.name IS NOT NULL  THEN schema_name(TP.schema_id)
                    WHEN DP.class_desc IS NULL AND XS.name IS NOT NULL  THEN schema_name(XS.schema_id)
                    WHEN DP.class_desc IS NULL AND MT.name IS NOT NULL  THEN P5.name
                    WHEN DP.class_desc IS NULL AND VC.name IS NOT NULL  THEN P6.name
                    WHEN DP.class_desc IS NULL AND SV.name IS NOT NULL  THEN P7.name
                    WHEN DP.class_desc IS NULL AND RS.name IS NOT NULL  THEN P8.name
                    WHEN DP.class_desc IS NULL AND RT.name IS NOT NULL  THEN P9.name
                    WHEN DP.class_desc IS NULL AND FT.name IS NOT NULL  THEN PA.name
                    WHEN DP.class_desc IS NULL AND SK.name IS NOT NULL  THEN PB.name
                    WHEN DP.class_desc IS NULL AND AK.name IS NOT NULL  THEN PC.name
                    WHEN DP.class_desc IS NULL AND CT.name IS NOT NULL  THEN PD.name
                    ELSE NULL 
                END                 AS [Schema/Owner],
                CASE
                    WHEN DP.class_desc = 'DATABASE'                     THEN DB.name
                    WHEN DP.class_desc = 'OBJECT_OR_COLUMN'             THEN OB.name
                    WHEN DP.class_desc = 'SCHEMA'                       THEN SC.name
                    WHEN DP.class_desc = 'DATABASE_PRINCIPAL'           THEN PR.name
                    WHEN DP.class_desc = 'ASSEMBLY'                     THEN AY.name
                    WHEN DP.class_desc = 'TYPE'                         THEN TP.name
                    WHEN DP.class_desc = 'XML_SCHEMA_COLLECTION'        THEN XS.name
                    WHEN DP.class_desc = 'MESSAGE_TYPE'                 THEN cast(MT.name as sql_variant)
                    WHEN DP.class_desc = 'SERVICE_CONTRACT'             THEN cast(VC.name as sql_variant)
                    WHEN DP.class_desc = 'SERVICE'                      THEN cast(SV.name as sql_variant)
                    WHEN DP.class_desc = 'REMOTE_SERVICE_BINDING'       THEN RS.name
                    WHEN DP.class_desc = 'ROUTE'                        THEN RT.name
                    WHEN DP.class_desc = 'FULLTEXT_CATALOG'             THEN FT.name
                    WHEN DP.class_desc = 'SYMMETRIC_KEY'                THEN SK.name
                    WHEN DP.class_desc = 'ASYMMETRIC_KEY'               THEN AK.name
                    WHEN DP.class_desc = 'CERTIFICATE'                  THEN CT.name
                    WHEN DP.class_desc IS NULL AND DB.name IS NOT NULL  THEN DB.name 
                    WHEN DP.class_desc IS NULL AND OB.name IS NOT NULL  THEN OB.name
                    WHEN DP.class_desc IS NULL AND SC.name IS NOT NULL  THEN SC.name
                    WHEN DP.class_desc IS NULL AND PR.name IS NOT NULL  THEN PR.name
                    WHEN DP.class_desc IS NULL AND AY.name IS NOT NULL  THEN AY.name
                    WHEN DP.class_desc IS NULL AND TP.name IS NOT NULL  THEN TP.name
                    WHEN DP.class_desc IS NULL AND XS.name IS NOT NULL  THEN XS.name
                    WHEN DP.class_desc IS NULL AND MT.name IS NOT NULL  THEN cast(MT.name as sql_variant)
                    WHEN DP.class_desc IS NULL AND VC.name IS NOT NULL  THEN cast(VC.name as sql_variant)
                    WHEN DP.class_desc IS NULL AND SV.name IS NOT NULL  THEN cast(SV.name as sql_variant)
                    WHEN DP.class_desc IS NULL AND RS.name IS NOT NULL  THEN RS.name
                    WHEN DP.class_desc IS NULL AND RT.name IS NOT NULL  THEN RT.name
                    WHEN DP.class_desc IS NULL AND FT.name IS NOT NULL  THEN FT.name
                    WHEN DP.class_desc IS NULL AND SK.name IS NOT NULL  THEN SK.name
                    WHEN DP.class_desc IS NULL AND AK.name IS NOT NULL  THEN AK.name
                    WHEN DP.class_desc IS NULL AND CT.name IS NOT NULL  THEN CT.name
                    ELSE NULL 
                END                 AS [Securable],
                CM.name             AS [Column],
                P1.type_desc        AS [Grantee Type],
                P1.name             AS [Grantee],
                DP.permission_name  AS [Permission],    
                DP.state_desc       AS [State],
                P2.name             AS [Grantor],
                P2.type_desc        AS [Grantor Type],
                CASE
                    WHEN DP.class_desc = 'DATABASE'                     THEN 'sys.databases'
                    WHEN DP.class_desc = 'OBJECT_OR_COLUMN'             THEN 'sys.all_objects'
                    WHEN DP.class_desc = 'SCHEMA'                       THEN 'sys.schemas'
                    WHEN DP.class_desc = 'DATABASE_PRINCIPAL'           THEN 'sys.database_principals'
                    WHEN DP.class_desc = 'ASSEMBLY'                     THEN 'sys.assemblies'
                    WHEN DP.class_desc = 'TYPE'                         THEN 'sys.types'
                    WHEN DP.class_desc = 'XML_SCHEMA_COLLECTION'        THEN 'sys.xml_schema_collections'
                    WHEN DP.class_desc = 'MESSAGE_TYPE'                 THEN 'sys.service_message_types'
                    WHEN DP.class_desc = 'SERVICE_CONTRACT'             THEN 'sys.database_principals'
                    WHEN DP.class_desc = 'SERVICE'                      THEN 'sys.services'
                    WHEN DP.class_desc = 'REMOTE_SERVICE_BINDING'       THEN 'sys.remote_service_bindings'
                    WHEN DP.class_desc = 'ROUTE'                        THEN 'sys.routes'
                    WHEN DP.class_desc = 'FULLTEXT_CATALOG'             THEN 'sys.database_principals'
                    WHEN DP.class_desc = 'SYMMETRIC_KEY'                THEN 'sys.symmetric_keys'
                    WHEN DP.class_desc = 'ASYMMETRIC_KEY'               THEN 'sys.asymmetric_keys'
                    WHEN DP.class_desc = 'CERTIFICATE'                  THEN 'sys.certificates'
                    WHEN DP.class_desc IS NULL AND DB.name IS NOT NULL  THEN 'sys.databases' 
                    WHEN DP.class_desc IS NULL AND OB.name IS NOT NULL  THEN 'sys.all_objects'
                    WHEN DP.class_desc IS NULL AND SC.name IS NOT NULL  THEN 'sys.schemas'
                    WHEN DP.class_desc IS NULL AND PR.name IS NOT NULL  THEN 'sys.database_principals'
                    WHEN DP.class_desc IS NULL AND AY.name IS NOT NULL  THEN 'sys.assemblies'
                    WHEN DP.class_desc IS NULL AND TP.name IS NOT NULL  THEN 'sys.types'
                    WHEN DP.class_desc IS NULL AND XS.name IS NOT NULL  THEN 'sys.xml_schema_collections'
                    WHEN DP.class_desc IS NULL AND MT.name IS NOT NULL  THEN 'sys.service_message_types'
                    WHEN DP.class_desc IS NULL AND VC.name IS NOT NULL  THEN 'sys.database_principals'
                    WHEN DP.class_desc IS NULL AND SV.name IS NOT NULL  THEN 'sys.services'
                    WHEN DP.class_desc IS NULL AND RS.name IS NOT NULL  THEN 'sys.remote_service_bindings'
                    WHEN DP.class_desc IS NULL AND RT.name IS NOT NULL  THEN 'sys.routes'
                    WHEN DP.class_desc IS NULL AND FT.name IS NOT NULL  THEN 'sys.database_principals'
                    WHEN DP.class_desc IS NULL AND SK.name IS NOT NULL  THEN 'sys.symmetric_keys'
                    WHEN DP.class_desc IS NULL AND AK.name IS NOT NULL  THEN 'sys.asymmetric_keys'
                    WHEN DP.class_desc IS NULL AND CT.name IS NOT NULL  THEN 'sys.certificates'
                    ELSE '<TARGETDB>.sys.database_permissions'
                END                 AS [Source View]
            FROM
                <TARGETDB>.sys.database_permissions DP
                LEFT OUTER JOIN <TARGETDB>.sys.database_principals P1
                    ON  P1.principal_id = DP.grantee_principal_id
                LEFT OUTER JOIN <TARGETDB>.sys.database_principals P2
                    ON  P2.principal_id = DP.grantor_principal_id

                FULL OUTER JOIN <TARGETDB>.sys.databases DB
                    ON  DB.database_id = db_id(db_name(DP.major_id))
                    AND DP.class_desc = 'DATABASE'
                LEFT OUTER JOIN <TARGETDB>.sys.server_principals PS
                    ON  PS.sid = DB.owner_sid

                FULL OUTER JOIN <TARGETDB>.sys.all_objects OB
                    ON  DP.major_id   = OB.[object_id]
                    AND DP.class_desc = 'OBJECT_OR_COLUMN'
                LEFT OUTER JOIN <TARGETDB>.sys.all_columns CM
                    ON  CM.[object_id] = DP.major_id
                    AND CM.[column_id] = DP.minor_id

                FULL OUTER JOIN <TARGETDB>.sys.schemas SC
                    ON  DP.major_id   = SC.[schema_id]
                    AND DP.class_desc = 'SCHEMA'
                LEFT OUTER JOIN <TARGETDB>.sys.database_principals P3
                    ON  P3.principal_id = SC.principal_id

                FULL OUTER JOIN <TARGETDB>.sys.database_principals PR
                    ON  DP.major_id   = PR.principal_id
                    AND DP.class_desc = 'DATABASE_PRINCIPAL'
                LEFT OUTER JOIN <TARGETDB>.sys.database_principals PE
                    ON  PE.principal_id = PR.owning_principal_id

                FULL OUTER JOIN <TARGETDB>.sys.assemblies AY
                    ON  DP.major_id   = AY.assembly_id
                    AND DP.class_desc = 'ASSEMBLY'
                LEFT OUTER JOIN <TARGETDB>.sys.database_principals P4
                    ON  P4.principal_id = AY.principal_id

                FULL OUTER JOIN <TARGETDB>.sys.types TP
                    ON  DP.major_id   = TP.user_type_id
                    AND DP.class_desc = 'TYPE'

                FULL OUTER JOIN <TARGETDB>.sys.xml_schema_collections XS
                    ON  DP.major_id   = XS.xml_collection_id
                    AND DP.class_desc = 'XML_SCHEMA_COLLECTION'

                FULL OUTER JOIN <TARGETDB>.sys.service_message_types MT
                    ON  DP.major_id   = MT.message_type_id
                    AND DP.class_desc = 'MESSAGE_TYPE'
                LEFT OUTER JOIN <TARGETDB>.sys.database_principals P5
                    ON  P5.principal_id = MT.principal_id

                FULL OUTER JOIN <TARGETDB>.sys.service_contracts VC
                    ON  DP.major_id   = VC.service_contract_id
                    AND DP.class_desc = 'SERVICE_CONTRACT'
                LEFT OUTER JOIN <TARGETDB>.sys.database_principals P6
                    ON  P6.principal_id = VC.principal_id

                FULL OUTER JOIN <TARGETDB>.sys.services SV
                    ON  DP.major_id   = SV.service_id
                    AND DP.class_desc = 'SERVICE'
                LEFT OUTER JOIN <TARGETDB>.sys.database_principals P7
                    ON  P7.principal_id = SV.principal_id

                FULL OUTER JOIN <TARGETDB>.sys.remote_service_bindings RS
                    ON  DP.major_id   = RS.remote_service_binding_id
                    AND DP.class_desc = 'REMOTE_SERVICE_BINDING'
                LEFT OUTER JOIN <TARGETDB>.sys.database_principals P8
                    ON  P8.principal_id = RS.principal_id

                FULL OUTER JOIN <TARGETDB>.sys.routes RT
                    ON  DP.major_id   = RT.route_id
                    AND DP.class_desc = 'ROUTE'
                LEFT OUTER JOIN <TARGETDB>.sys.database_principals P9
                    ON  P9.principal_id = RT.principal_id

                FULL OUTER JOIN <TARGETDB>.sys.fulltext_catalogs FT
                    ON  DP.major_id   = FT.fulltext_catalog_id
                    AND DP.class_desc = 'FULLTEXT_CATALOG'
                LEFT OUTER JOIN <TARGETDB>.sys.database_principals PA
                    ON  PA.principal_id = FT.principal_id

                FULL OUTER JOIN <TARGETDB>.sys.symmetric_keys SK
                    ON  DP.major_id   = SK.symmetric_key_id
                    AND DP.class_desc = 'SYMMETRIC_KEY'
                LEFT OUTER JOIN <TARGETDB>.sys.database_principals PB
                    ON  PB.principal_id = SK.principal_id

                FULL OUTER JOIN <TARGETDB>.sys.asymmetric_keys AK
                    ON  DP.major_id   = AK.asymmetric_key_id
                    AND DP.class_desc = 'ASYMMETRIC_KEY'
                LEFT OUTER JOIN <TARGETDB>.sys.database_principals PC
                    ON  PC.principal_id = AK.principal_id

                FULL OUTER JOIN <TARGETDB>.sys.certificates CT
                    ON  DP.major_id   = CT.certificate_id
                    AND DP.class_desc = 'CERTIFICATE'
                LEFT OUTER JOIN <TARGETDB>.sys.database_principals PD
                    ON  PD.principal_id = CT.principal_id    
            ;
            GO



            BEGIN TRY DROP FUNCTION STIG.database_effective_permissions END TRY BEGIN CATCH END CATCH;
            GO

            CREATE FUNCTION STIG.database_effective_permissions(@Grantee sysname)
            --  Given the name of a database principal (user or role), this table-valued function 
            --  returns information about permissions granted (or denied) to that user or database role,
            --  either directly or inherited from a higher-level role.
                RETURNS @T TABLE
                    (
                    [Current Server]            sysname         null,
                    [Current Instance]          sysname         null,
                    [Current DB]                sysname         null,
                    [Current Login]             sysname         null,
                    [Current User]              sysname         null,
                    [Securable Type or Class]   nvarchar(60)    null,
                    [Schema/Owner]              sysname         null,
                    [Securable]                 sql_variant     null,
                    [Column]                    sysname         null,
                    [Effective Grantee]         sysname         null,
                    [Membership Chain]          nvarchar(max)   null,
                    [Direct Grantee]            sysname         null,
                    [Direct Grantee Type]       nvarchar(60)    null,
                    [Permission]                sysname         null,
                    [State]                     nvarchar(60)    null,
                    [Grantor]                   sysname         null,
                    [Grantor Type]              nvarchar(60)    null,
                    [source view]               sysname         null
                    )
            AS BEGIN;
                WITH Targets AS
                (
                SELECT [Role] AS [Principal], [Membership Chain], len([Membership Chain]) AS [Membership Chain Length] FROM STIG.database_roles_of(@Grantee)
                UNION ALL
                SELECT @Grantee AS [Principal], @Grantee AS [Membership Chain], len(@Grantee) AS [Membership Chain Length]    
                )
                INSERT INTO @T
                    SELECT TOP 100000000
                        P.[Current Server],
                        P.[Current Instance],
                        P.[Current DB],
                        P.[Current Login],
                        P.[Current User],
                        P.[Securable Type or Class],
                        P.[Schema/Owner],
                        P.[Securable],
                        P.[Column],
                        @Grantee                AS [Effective Grantee],
                        T.[Membership Chain]    AS [Membership Chain],
                        P.[Grantee]             AS [Direct Grantee],
                        P.[Grantee Type]        AS [Direct Grantee Type],
                        P.[Permission],
                        P.[State],
                        P.[Grantor],
                        P.[Grantor Type],
                        P.[source view]
                    FROM
                        STIG.database_permissions P
                        INNER JOIN Targets T ON T.[Principal] = P.[Grantee]
                    ORDER BY
                        P.[Securable Type or Class],
                        P.[Schema/Owner],
                        P.[Securable],
                        P.[Column],
                        T.[Membership Chain Length]
                    ;
                    UPDATE T
                    SET [State] = [State] + ' (schema denied)'
                    FROM @T T
                    WHERE
                        T.[State] <> 'DENY'
                    AND    T.[Securable Type or Class] <> 'SCHEMA'
                    AND 0 <
                        (
                        SELECT count(*) FROM @T X
                        WHERE
                            X.[Securable Type or Class] = 'SCHEMA'
                        AND X.[Securable]               = T.[Schema/Owner]
                        AND X.[Permission]              = T.[Permission]
                        AND X.[State]                   = 'DENY'
                        )
                    ;
                    UPDATE T
                    SET [State] = [State] + ' (denied)'
                    FROM @T T
                    WHERE
                        T.[State] <> 'DENY'
                    AND 0 <
                        (
                        SELECT count(*) FROM @T X
                        WHERE
                            X.[Securable Type or Class] = T.[Securable Type or Class]
                        AND    X.[Schema/Owner]         = T.[Schema/Owner]
                        AND X.[Securable]               = T.[Securable]
                        AND    (X.[Column] = T.[Column] OR (X.[Column] IS NULL) AND (T.[Column] IS NULL))
                        AND X.[Permission]              = T.[Permission]
                        AND X.[State]                   = 'DENY'
                        )
                    ;
                    UPDATE T
                    SET [State] = [State] + ' (column(s) denied)'
                    FROM @T T
                    WHERE T.[Securable Type or Class] <> 'COLUMN'
                    AND 0 <
                        (
                        SELECT count(*) FROM @T X
                        WHERE
                            X.[Securable Type or Class] = 'COLUMN'
                        AND X.[Schema/Owner]            = T.[Schema/Owner]
                        AND X.[Securable]               = T.[Securable]
                        AND X.[Permission]              = T.[Permission]
                        AND X.[State]                   = 'DENY'
                        )
                    ;
            ExitFunction:
                RETURN;
            END;
            GO



            BEGIN TRY DROP VIEW STIG.server_role_members END TRY BEGIN CATCH END CATCH;
            GO

            CREATE VIEW STIG.server_role_members
            --  Based on the system view sys.server_role_members, this presents the list of
            --  server role memberships using roles' and logins' names rather than their id numbers.
            --  Although membership in server roles is hierarchical, this view lists only the direct memberships.
            AS SELECT
                R.name    AS [Role],
                M.name    AS [Member]
            FROM
                <TARGETDB>.sys.server_role_members X
                INNER JOIN <TARGETDB>.sys.server_principals R ON R.principal_id = X.role_principal_id
                INNER JOIN <TARGETDB>.sys.server_principals M ON M.principal_id = X.member_principal_id
            ;
            GO


            BEGIN TRY DROP FUNCTION STIG.server_roles_of END TRY BEGIN CATCH END CATCH;
            GO

            CREATE FUNCTION STIG.server_roles_of(@server_principal sysname)
            --  Membership in server roles is hierarchical.
            --  Given the name of a server principal (login or role), this table-valued function returns
            --  a list of all the roles it belongs to, both directly and indirectly.
                RETURNS @T TABLE
                    (
                    [Member]            sysname,
                    [Role]              sysname, 
                    [via Member]        sysname, 
                    [Membership Chain]  nvarchar(max)
                    )
            AS BEGIN;
                WITH Membership AS
                (
                SELECT
                    [Member] AS [Member],
                    [Role], 
                    [Member] AS [via Member], 
                    CAST([Member] AS varchar(max)) + ' < ' + CAST([Role] AS varchar(max)) AS [Membership Chain]
                FROM
                    STIG.server_role_members
                WHERE 
                    [Member] = @server_principal
    
                UNION ALL
    
                SELECT
                    X.[Member],
                    R.[Role],
                    R.[Member] AS [via Member],
                    X.[Membership Chain] + ' < ' + CAST(R.[Role] AS varchar(max)) AS [Membership Chain]
                FROM 
                    Membership X
                    INNER JOIN STIG.server_role_members R ON X.[Role] = R.[Member]
                )
                INSERT INTO @T SELECT * FROM Membership;
            ExitFunction:
                RETURN;
            END;
            GO


            BEGIN TRY DROP FUNCTION STIG.members_of_server_role END TRY BEGIN CATCH END CATCH;
            GO

            CREATE FUNCTION STIG.members_of_server_role(@server_role sysname)
            --  Membership in server roles is hierarchical.
            --  Given the name of a server role, this table-valued function returns
            --  a list of all the roles and logins that belong to it, both directly and indirectly.
                RETURNS @T TABLE
                    (
                    [Role]              sysname,
                    [Member]            sysname,
                    [via Role]          sysname, 
                    [Membership Chain]  nvarchar(max)
                    )
            AS BEGIN;
                WITH Membership AS
                (
                SELECT
                    [Role] AS [Role],
                    [Member], 
                    [Role] AS [via Role], 
                    CAST([Role] AS varchar(max)) + ' > ' + CAST([Member] AS varchar(max)) AS [Membership Chain]
                FROM
                    STIG.server_role_members
                WHERE 
                    [Role] = @server_role

                UNION ALL

                SELECT
                    X.[Role] AS [Role],
                    R.[Member],
                    R.[Role] AS [via Role],
                    X.[Membership Chain] + ' > ' + CAST(R.[Member] AS varchar(max)) AS [Membership Chain]
                FROM 
                    Membership X
                    INNER JOIN STIG.server_role_members R ON X.[Member] = R.[Role]
                )
                INSERT INTO @T SELECT * FROM Membership;
            ExitFunction:
                RETURN;
            END;
            GO



            BEGIN TRY DROP VIEW STIG.server_permissions END TRY BEGIN CATCH END CATCH;
            GO

            CREATE VIEW STIG.server_permissions
            --  Based on the system view sys.server_permissions, this provides additional, descriptive material.
            --  The list includes only those permissions explicitly granted (or denied) to a server login or role;
            --  it does not include permissions that are implicit or inherited from a higher-level role.
            --  Securable items that exist but have no explicit permissions assigned are included in the
            --  list, with columns describing the grantor and grantee left null.
            AS SELECT DISTINCT
                @@SERVERNAME          AS [Current Server],
                @@SERVICENAME         AS [Current Instance],
                '<TARGETDB>'             AS [Current DB],
                SYSTEM_USER           AS [Current Login],
                USER                  AS [Current User],
                CASE
                    WHEN SP.class_desc IS NOT NULL THEN 
                        CASE
                            WHEN SP.class_desc = 'SERVER' AND S.is_linked = 0 THEN 'SERVER'
                            WHEN SP.class_desc = 'SERVER' AND S.is_linked = 1 THEN 'SERVER (linked)'
                            ELSE SP.class_desc
                        END
                    WHEN E.name IS NOT NULL THEN 'ENDPOINT'
                    WHEN S.name IS NOT NULL AND S.is_linked = 0 THEN 'SERVER'
                    WHEN S.name IS NOT NULL AND S.is_linked = 1 THEN 'SERVER (linked)'
                    WHEN P.name IS NOT NULL THEN 'SERVER_PRINCIPAL'
                    ELSE '???' 
                END                    AS [Securable Class],
                CASE
                    WHEN E.name IS NOT NULL THEN E.name
                    WHEN S.name IS NOT NULL THEN S.name 
                    WHEN P.name IS NOT NULL THEN P.name
                    ELSE '???' 
                END                    AS [Securable],
                P1.name                AS [Grantee],
                P1.type_desc           AS [Grantee Type],
                sp.permission_name     AS [Permission],
                sp.state_desc          AS [State],
                P2.name                AS [Grantor],
                P2.type_desc           AS [Grantor Type],
                CASE
                    WHEN SP.class_desc = 'SERVER'                       THEN 'sys.servers'
                    WHEN SP.class_desc = 'ENDPOINT'                     THEN 'sys.endpoints'
                    WHEN SP.class_desc = 'SERVER_PRINCIPAL'             THEN 'sys.server_principals'
                    WHEN SP.class_desc IS NULL AND S.name IS NOT NULL   THEN 'sys.servers'
                    WHEN SP.class_desc IS NULL AND E.name IS NOT NULL   THEN 'sys.endpoints' 
                    WHEN SP.class_desc IS NULL AND P.name IS NOT NULL   THEN 'sys.server_principals'
                    ELSE 'sys.server_permissions'
                END                 AS [Source View]
            FROM
                <TARGETDB>.sys.server_permissions SP
                INNER JOIN <TARGETDB>.sys.server_principals P1
                    ON P1.principal_id = SP.grantee_principal_id
                INNER JOIN <TARGETDB>.sys.server_principals P2
                    ON P2.principal_id = SP.grantor_principal_id

                FULL OUTER JOIN sys.servers S
                    ON  SP.class_desc = 'SERVER'
                    AND S.server_id = SP.major_id

                FULL OUTER JOIN <TARGETDB>.sys.endpoints E
                    ON  SP.class_desc = 'ENDPOINT'
                    AND E.endpoint_id = SP.major_id

                FULL OUTER JOIN <TARGETDB>.sys.server_principals P
                    ON  SP.class_desc = 'SERVER_PRINCIPAL'        
                    AND P.principal_id = SP.major_id
            ;
            GO


            BEGIN TRY DROP FUNCTION STIG.server_effective_permissions END TRY BEGIN CATCH END CATCH;
            GO

            CREATE FUNCTION STIG.server_effective_permissions(@Grantee sysname)
            --  Given the name of a server principal (login or server role), this table-valued function 
            --  returns information about permissions granted (or denied) to that login or role,
            --  either directly or inherited from a higher-level role.
                RETURNS @T TABLE
                    (
                    [Current Server]            sysname         null,
                    [Current Instance]          sysname         null,
                    [Current DB]                sysname         null,
                    [Current Login]             sysname         null,
                    [Current User]              sysname         null,
                    [Securable Class]           nvarchar(60)    null,
                    [Securable]                 sql_variant     null,
                    [Effective Grantee]         sysname         null,
                    [Membership Chain]          nvarchar(max)   null,
                    [Direct Grantee]            sysname         null,
                    [Direct Grantee Type]       nvarchar(60)    null,
                    [Permission]                sysname         null,
                    [State]                     nvarchar(60)    null,
                    [Grantor]                   sysname         null,
                    [Grantor Type]              nvarchar(60)    null,
                    [source view]               sysname         null
                    )
            AS BEGIN;
                WITH Targets AS
                (
                SELECT [Role] AS [Principal], [Membership Chain], len([Membership Chain]) AS [Membership Chain Length] FROM STIG.server_roles_of(@Grantee)
                UNION ALL
                SELECT @Grantee AS [Principal], @Grantee AS [Membership Chain], len(@Grantee) AS [Membership Chain Length]    
                )
                INSERT INTO @T
                    SELECT TOP 100000000
                        P.[Current Server],
                        P.[Current Instance],
                        P.[Current DB],
                        P.[Current Login],
                        P.[Current User],
                        P.[Securable Class],
                        P.[Securable],
                        @Grantee                AS [Effective Grantee],
                        T.[Membership Chain]    AS [Membership Chain],
                        P.[Grantee]             AS [Direct Grantee],
                        P.[Grantee Type]        AS [Direct Grantee Type],
                        P.[Permission],
                        P.[State],
                        P.[Grantor],
                        P.[Grantor Type],
                        P.[source view]
                    FROM
                        STIG.server_permissions P
                        INNER JOIN Targets T ON T.[Principal] = P.[Grantee]
                    ORDER BY
                        P.[Securable Class],
                        P.[Securable],
                        T.[Membership Chain Length]
                    ;
                    UPDATE T
                    SET [State] = [State] + ' (denied)'
                    FROM @T T
                    WHERE
                        T.[State] <> 'DENY'
                    AND 0 <
                        (
                        SELECT count(*) FROM @T X
                        WHERE
                            X.[Securable Class] = T.[Securable Class]
                        AND X.[Securable]       = T.[Securable]
                        AND X.[Permission]      = T.[Permission]
                        AND X.[State]           = 'DENY'
                        )
                    ;
            ExitFunction:
                RETURN;
            END;
            GO

tools\dbatools\bin\third-party-licenses\sql-server-data-tools-license-terms-vs2017.md

---
title: "SQL Server Data Tools and Visual Studio 2017 - License Terms | Microsoft Docs"
ms.custom: ""
ms.date: "08/04/2017"
ms.prod: "sql-non-specified"
ms.prod_service: "sql-non-specified"
ms.service: ""
ms.component: "ssdt"
ms.reviewer: ""
ms.suite: "sql"
ms.technology: 
  - "tools-ssdt"
ms.tgt_pltfrm: ""
ms.topic: "article"
ms.assetid: 
caps.latest.revision: 5
author: "stevestein"
ms.author: "sstein"
manager: "craigg"
ms.workload: "On Demand"
---
# SQL Server Data Tools - License Terms
[!INCLUDE[appliesto-ss-asdb-asdw-pdw-md](../includes/appliesto-ss-asdb-asdw-pdw-md.md)]
## MICROSOFT SOFTWARE LICENSE TERMS  
  
**MICROSOFT SQL SERVER DATA TOOLS**  
**MICROSOFT SQL SERVER DATA TOOLS FOR VISUAL STUDIO 2017**
---  
These license terms are an agreement between Microsoft Corporation (or based on where you live, one of its affiliates) and you. Please read them. They apply to the software named above, which includes the media on which you received it, if any. The terms also apply to any Microsoft  
* updates,  
* supplements,  
* Internet-based services, and  
* support services  
  
for this software, unless other terms accompany those items. If so, those terms apply.  
  
**BY USING THE SOFTWARE, YOU ACCEPT THESE TERMS. YOU MAY CHOOSE NOT TO ACCEPT THESE TERMS, IN WHICH CASE YOU MAY NOT USE THE SOFTWARE (IF YOU HAVE NOT ALREADY INSTALLED IT) OR WITHDRAW YOUR ACCEPTANCE ANY TIME BY UNINSTALLING THE SOFTWARE.**
  
---  
**If you comply with these license terms, you have the rights below.**  
**1.    INSTALLATION AND USE RIGHTS.**  
  
&nbsp;&nbsp;**a.    Installation and Use.**  
  
   * You may install and use any number of copies of the software on your devices to design, develop and test your programs.  
   * If the software includes Microsoft Visual Studio 2017, you may only use Microsoft Visual Studio 2017 components with Microsoft SQL Server Data Tools.
     
&nbsp;&nbsp;**b.    Other Microsoft Programs.**  

   * The software includes other Microsoft SQL Server technologies, Microsoft Visual Studio  2017, .NET Framework, Visual C++ Redistributable for Visual Studio 2017, and Microsoft Report Viewer 2016 Runtime in conjunction with the software licensed here. These components are governed by separate agreements and their own product support policies, as described in the license terms found in the installation directory for that component or in the “Licenses” folder accompanying the software.  
  
**2.    ADDITIONAL LICENSING REQUIREMENTS AND/OR USE RIGHTS.**  
  
&nbsp;&nbsp;**a.    Distributable Code.**  
  
&nbsp;&nbsp;&nbsp;&nbsp;**i.    Right to Use and Distribute. If you comply with the terms below:**  
* You may copy and distribute the object code form of the Microsoft SQL Server Data-Tier Application Framework (“**Distributable Code**”) in programs you develop; and   
* You may permit distributors of your programs to copy and distribute the Distributable Code as part of those programs.  
  
&nbsp;&nbsp;&nbsp;&nbsp;**ii.   Distribution Requirements. For any Distributable Code you distribute, you must**  
* add significant primary functionality to it in your programs; 
* for any Distributable Code having a filename extension of .lib, distribute only the results of running such Distributable Code through a linker with your program; 
* distribute Distributable Code included in a setup program only as part of that setup program without modification; 
* require distributors and external end users to agree to the Microsoft license terms included as part of our software setup program; 
* display your valid copyright notice on your programs; and 
* indemnify, defend, and hold harmless Microsoft from any claims, including attorneys’ fees, related to the distribution or use of your programs
 
  
&nbsp;&nbsp;&nbsp;&nbsp;**iii.  Distribution Restrictions. You may not**  
* alter any copyright, trademark or patent notice in the Distributable Code; 
* use Microsoft’s trademarks in your programs’ names or in a way that suggests your programs come from or are endorsed by Microsoft; 
* distribute Distributable Code to run on a platform other than the Windows platform; 
* include Distributable Code in malicious, deceptive or unlawful programs; or 
* modify or distribute the source code of any Distributable Code so that any part of it becomes subject to an Excluded License. An Excluded License is one that requires, as a condition of use, modification or distribution, that 
* the code be disclosed or distributed in source code form; or 
* others have the right to modify it. 
  
  
**3.    INTERNET-BASED SERVICES.** Microsoft provides Internet-based services with the software. It may change or cancel them at any time.  You may not use these devices in any way that could harm them or impair anyone else’s use of them.  You may not use the services to try to gain unauthorized access to any service, data, account or network by any means.  
  
&nbsp;&nbsp;**a.    SQL Server Reporting Services Map Report Item.** The software may include features that retrieve content such as maps, images and other data through the Bing Maps (or successor branded) application programming interface (the “Bing Maps APIs”). The purpose of these features is to create reports displaying data on top of maps, aerial and hybrid imagery. If these features are included, you may use them to create and view dynamic or static documents. This may be done only in conjunction with and through methods and means of access integrated in the software. You may not otherwise copy, store, archive, or create a database of the content available through the Bing Maps APIs. You may not use the following for any purpose even if they are available through the Bing Maps APIs:  
* Bing Maps APIs to provide sensor based guidance/routing, or  
* any Road Traffic Data or Bird’s Eye Imagery (or associated metadata).  
Your use of Bing Maps is also governed by the Bing Maps End User Terms of Use available at http://go.microsoft.com/?linkid=9710837 and the Bing Maps Privacy Statement available at http://go.microsoft.com/fwlink/?LinkID=248686.  
  
&nbsp;&nbsp;**b.**  This software is designed to allow users of SQL Server Integration Services (SSIS) to (a) move data between on-premises data-stores and Microsoft online services and (b) trigger certain actions in Microsoft online services. In order to do this, the software uses Internet Protocols to (i) send data, including your own data as designated by you and data about the software’s configuration, to these services, and (ii) request data, including your own data as designated by you and data about the nature and configuration of your Microsoft online services, from these services. Once you configure the software to communicate with these services, you may not receive separate notices when the software connects to these services.  
  
**4.    FEEDBACK.** If you give feedback about the software to Microsoft, you give to Microsoft, without charge, the right to use, share and commercialize your feedback in any way and for any purpose. You also give to third parties, without charge, any patent rights needed for their products, technologies and services to use or interface with any specific parts of a Microsoft software or service that includes the feedback. You will not give feedback that is subject to a license that requires Microsoft to license its software or documentation to third parties because we include your feedback in them. These rights survive this agreement.  
  
**5.  THIRD PARTY NOTICES.** The software may include third party components with separate legal notices or governed by other agreements, as may be described in the ThirdPartyNotices file accompanying the software.  Even if such components are governed by other agreements, the disclaimers and the limitations on and exclusions of damages below also apply.  
  
**6.    .NET FRAMEWORK SOFTWARE.** The software contains Microsoft .NET Framework software. This software is part of Windows. The license terms for Windows apply to your use of the .NET Framework software.  
  
**7.    SCOPE OF LICENSE.** The software is licensed, not sold. This agreement only gives you some rights to use the software. Microsoft reserves all other rights. Unless applicable law gives you more rights despite this limitation, you may use the software only as expressly permitted in this agreement. In doing so, you must comply with any technical limitations in the software that only allow you to use it in certain ways. You may not  
  
* disclose the results of any benchmark tests of the software, other than the Microsoft .NET Framework (see separate term above), to any third party without Microsoft’s prior written approval;  
* work around any technical limitations in the software;  
* reverse engineer, decompile or disassemble the software, except and only to the extent that applicable law expressly permits, despite this limitation;  
* make more copies of the software than specified in this agreement or allowed by applicable law, despite this limitation;  
* publish the software for others to copy;  
* rent, lease or lend the software;  
* transfer the software or this agreement to any third party; or  
* use the software for commercial software hosting services.  
  
**8.    EXPORT RESTRICTIONS.** The software is subject to United States export laws and regulations. You must comply with all domestic and international export laws and regulations that apply to the software. These laws include restrictions on destinations, end users and end use. For additional information, see www.microsoft.com/exporting.  
  
**9.    UPDATES.** The software may install automatic updates, which cannot be turned off. By using the software, you agree to receive automatic updates without any additional notice, and permit Microsoft to download and install them for you. You agree to obtain these updates only from Microsoft or Microsoft authorized sources. If you do not want software updates, disconnect your device from the internet or uninstall the software.  
  
**10.   SUPPORT SERVICES.** Because this software is “as is,” we may not provide support services for it.  
  
**11.   ENTIRE AGREEMENT.** This agreement, and the terms for supplements, updates, Internet-based services and support services that you use, are the entire agreement for the software and support services.  
  
**12.   APPLICABLE LAW.**  
  
&nbsp;&nbsp;**a.    United States.** If you acquired the software in the United States, Washington state law governs the interpretation of this agreement and applies to claims for breach of it, regardless of conflict of laws principles. The laws of the state where you live govern all other claims, including claims under state consumer protection laws, unfair competition laws, and in tort.  
  
&nbsp;&nbsp;**b.    Outside the United States.** If you acquired the software in any other country, the laws of that country apply.  
  
**13.   LEGAL EFFECT.** This agreement describes certain legal rights. You may have other rights under the laws of your country. You may also have rights with respect to the party from whom you acquired the software. This agreement does not change your rights under the laws of your country if the laws of your country do not permit it to do so.  
  
**14.   DISCLAIMER OF WARRANTY. The software is licensed “as-is.” You bear the risk of using it. Microsoft gives no express warranties, guarantees or conditions. You may have additional consumer rights or statutory guarantees under your local laws which this agreement cannot change. To the extent permitted under your local laws, Microsoft excludes the implied warranties of merchantability, fitness for a particular purpose and non-infringement.**  
  
&nbsp;&nbsp;FOR AUSTRALIA – You have statutory guarantees under the Australian Consumer Law and nothing in these terms is intended to affect those rights.  
  
**15.   LIMITATION ON AND EXCLUSION OF REMEDIES AND DAMAGES. You can recover from Microsoft and its suppliers only direct damages up to U.S. $5.00. You cannot recover any other damages, including consequential, lost profits, special, indirect or incidental damages.**  
  
This limitation applies to  
* anything related to the software, services, content (including code) on third party Internet sites, or third party programs; and  
* claims for breach of contract, breach of warranty, guarantee or condition, strict liability, negligence, or other tort to the extent permitted by applicable law.  
  
It also applies even if Microsoft knew or should have known about the possibility of the damages. The above limitation or exclusion may not apply to you because your country may not allow the exclusion or limitation of incidental, consequential or other damages.  
  
**Please note: As this software is distributed in Quebec, Canada, these license terms are provided below in French.**  
  
**Remarque : Ce logiciel étant distribué au Québec, Canada, certaines des clauses dans ce contrat sont fournies ci-dessous en français.**  
  
EXCLUSIONS DE GARANTIE. Le logiciel est concédé sous licence « en l’état ». Vous assumez tous les risques liés à son utilisation. Microsoft n’accorde aucune garantie ou condition expresse. Vous pouvez bénéficier de droits des consommateurs supplémentaires dans le cadre du droit local, que ce contrat ne peut modifier. Lorsque cela est autorisé par le droit local, Microsoft exclut les garanties implicites de qualité, d’adéquation à un usage particulier et d’absence de contrefaçon.  

LIMITATION ET EXCLUSION DE RECOURS ET DE DOMMAGES. Vous pouvez obtenir de Microsoft et de ses fournisseurs une indemnisation en cas de dommages directs limitée uniquement à hauteur de 5,00 $ US. Vous ne pouvez prétendre à aucune indemnisation pour les autres dommages, y compris les dommages spéciaux, indirects ou accessoires et pertes de bénéfices.  

Cette limitation concerne :  

toute affaire liée au logiciel, aux services ou au contenu (y compris le code) figurant sur des sites Internet tiers ou dans des programmes tiers et 
les réclamations au titre de violation de contrat ou de garantie, ou au titre de responsabilité stricte, de négligence ou d’une autre faute dans la limite autorisée par la loi en vigueur.  

Elle s’applique également même si Microsoft connaissait l'éventualité d'un tel dommage. La limitation ou exclusion ci-dessus peut également ne pas vous être applicable, car votre pays n’autorise pas l’exclusion ou la limitation de responsabilité pour les dommages indirects, accessoires ou de quelque nature que ce soit.  

EFFET JURIDIQUE. Le présent contrat décrit certains droits juridiques. Vous pourriez avoir d’autres droits prévus par les lois de votre pays. Le présent contrat ne modifie pas les droits que vous confèrent les lois de votre pays si celles-ci ne le permettent pas.

tools\dbatools\bin\third-party-licenses\sql-server-data-tools-license-terms.md

---
title: "SQL Server Data Tools - License Terms | Microsoft Docs"
ms.custom: ""
ms.date: "01/19/2017"
ms.prod: "sql-non-specified"
ms.prod_service: "sql-non-specified"
ms.service: ""
ms.component: "ssdt"
ms.reviewer: ""
ms.suite: "sql"
ms.technology: 
  - "tools-ssdt"
ms.tgt_pltfrm: ""
ms.topic: "article"
ms.assetid: 0ac5aa53-cdc3-4ced-9ab9-690be02aa951
caps.latest.revision: 5
author: "stevestein"
ms.author: "sstein"
manager: "jhubbard"
ms.workload: "On Demand"
---
# SQL Server Data Tools - License Terms
[!INCLUDE[appliesto-ss-asdb-asdw-pdw-md](../includes/appliesto-ss-asdb-asdw-pdw-md.md)]
## MICROSOFT SOFTWARE LICENSE TERMS  
  
**MICROSOFT SQL SERVER DATA TOOLS**  
  
---  
These license terms are an agreement between Microsoft Corporation (or based on where you live, one of its affiliates) and you. Please read them. They apply to the software named above, which includes the media on which you received it, if any. The terms also apply to any Microsoft  
* updates,  
* supplements,  
* Internet-based services, and  
* support services  
  
for this software, unless other terms accompany those items. If so, those terms apply.  
  
**BY USING THE SOFTWARE, YOU ACCEPT THESE TERMS. YOU MAY CHOOSE NOT TO ACCEPT THESE TERMS, IN WHICH CASE YOU MAY NOT USE THE SOFTWARE (IF YOU HAVE NOT ALREADY INSTALLED IT) OR WITHDRAW YOUR ACCEPTANCE ANY TIME BY UNINSTALLING THE SOFTWARE.**  
  
---  
**If you comply with these license terms, you have the rights below.**  
**1.    INSTALLATION AND USE RIGHTS.**  
  
&nbsp;&nbsp;**a.    Installation and Use.**  
  
   * You may install and use any number of copies of the software on your devices to design, develop and test your programs.  
     
&nbsp;&nbsp;**b.    Other Microsoft Programs.** The software includes other Microsoft SQL Server technologies, Microsoft Visual Studio 2015 Shell (Isolated) Redistributable Package, Microsoft Visual Studio 2015 Shell (Integrated) Redistributable Package, Microsoft Visual Studio Tools for Applications 2015, .NET Framework, Visual C++ Redistributable for Visual Studio 2015, and Microsoft Report Viewer 2016 Runtime in conjunction with the software licensed here. These components are governed by separate agreements and their own product support policies, as described in the license terms found in the installation directory for that component or in the “Licenses” folder accompanying the software.  
  
**2.    ADDITIONAL LICENSING REQUIREMENTS AND/OR USE RIGHTS.**  
  
&nbsp;&nbsp;**a.    Distributable Code.**  
  
&nbsp;&nbsp;&nbsp;&nbsp;**i.    Right to Use and Distribute. If you comply with the terms below:**  
* You may copy and distribute the object code form of the Microsoft SQL Server Data-Tier Application Framework (“**Distributable Code**”) in programs you develop; and   
* You may permit distributors of your programs to copy and distribute the Distributable Code as part of those programs.  
  
&nbsp;&nbsp;&nbsp;&nbsp;**ii.   Distribution Requirements. For any Distributable Code you distribute, you must**  
* add significant primary functionality to it in your programs;  
* for any Distributable Code having a filename extension of .lib, distribute only the results of running such Distributable Code through a linker with your program;  
* distribute Distributable Code included in a setup program only as part of that setup program without modification;  
* require distributors and external end users to agree to the Microsoft license terms included as part of our software setup program;   
* display your valid copyright notice on your programs; and  
* indemnify, defend, and hold harmless Microsoft from any claims, including attorneys’ fees, related to the distribution or use of your programs.  
  
&nbsp;&nbsp;&nbsp;&nbsp;**iii.  Distribution Restrictions. You may not**  
* alter any copyright, trademark or patent notice in the Distributable Code;  
* use Microsoft’s trademarks in your programs’ names or in a way that suggests your programs come from or are endorsed by Microsoft;  
* distribute Distributable Code to run on a platform other than the Windows platform;  
* include Distributable Code in malicious, deceptive or unlawful programs; or  
* modify or distribute the source code of any Distributable Code so that any part of it becomes subject to an Excluded License. An Excluded License is one that requires, as a condition of use, modification or distribution, that  
* the code be disclosed or distributed in source code form; or  
* others have the right to modify it.  
  
**3.    INTERNET-BASED SERVICES.** Microsoft provides Internet-based services with the software. It may change or cancel them at any time.  You may not use these devices in any way that could harm them or impair anyone else’s use of them.  You may not use the services to try to gain unauthorized access to any service, data, account or network by any means.  
  
&nbsp;&nbsp;**a.    SQL Server Reporting Services Map Report Item.** The software may include features that retrieve content such as maps, images and other data through the Bing Maps (or successor branded) application programming interface (the “Bing Maps APIs”). The purpose of these features is to create reports displaying data on top of maps, aerial and hybrid imagery. If these features are included, you may use them to create and view dynamic or static documents. This may be done only in conjunction with and through methods and means of access integrated in the software. You may not otherwise copy, store, archive, or create a database of the content available through the Bing Maps APIs. You may not use the following for any purpose even if they are available through the Bing Maps APIs:  
* Bing Maps APIs to provide sensor based guidance/routing, or  
* any Road Traffic Data or Bird’s Eye Imagery (or associated metadata).  
Your use of Bing Maps is also governed by the Bing Maps End User Terms of Use available at http://go.microsoft.com/?linkid=9710837 and the Bing Maps Privacy Statement available at http://go.microsoft.com/fwlink/?LinkID=248686.  
  
&nbsp;&nbsp;**b.**  This software is designed to allow users of SQL Server Integration Services (SSIS) to (a) move data between on-premises data-stores and Microsoft online services and (b) trigger certain actions in Microsoft online services. In order to do this, the software uses Internet Protocols to (i) send data, including your own data as designated by you and data about the software’s configuration, to these services, and (ii) request data, including your own data as designated by you and data about the nature and configuration of your Microsoft online services, from these services. Once you configure the software to communicate with these services, you may not receive separate notices when the software connects to these services.  
  
**4.    FEEDBACK.** If you give feedback about the software to Microsoft, you give to Microsoft, without charge, the right to use, share and commercialize your feedback in any way and for any purpose. You also give to third parties, without charge, any patent rights needed for their products, technologies and services to use or interface with any specific parts of a Microsoft software or service that includes the feedback. You will not give feedback that is subject to a license that requires Microsoft to license its software or documentation to third parties because we include your feedback in them. These rights survive this agreement.  
  
**5.  THIRD PARTY NOTICES.** The software may include third party components with separate legal notices or governed by other agreements, as may be described in the ThirdPartyNotices file accompanying the software.  Even if such components are governed by other agreements, the disclaimers and the limitations on and exclusions of damages below also apply.  
  
**6.    .NET FRAMEWORK SOFTWARE.** The software contains Microsoft .NET Framework software. This software is part of Windows. The license terms for Windows apply to your use of the .NET Framework software.  
  
**7.    SCOPE OF LICENSE.** The software is licensed, not sold. This agreement only gives you some rights to use the software. Microsoft reserves all other rights. Unless applicable law gives you more rights despite this limitation, you may use the software only as expressly permitted in this agreement. In doing so, you must comply with any technical limitations in the software that only allow you to use it in certain ways. You may not  
  
* disclose the results of any benchmark tests of the software, other than the Microsoft .NET Framework (see separate term above), to any third party without Microsoft’s prior written approval;  
* work around any technical limitations in the software;  
* reverse engineer, decompile or disassemble the software, except and only to the extent that applicable law expressly permits, despite this limitation;  
* make more copies of the software than specified in this agreement or allowed by applicable law, despite this limitation;  
* publish the software for others to copy;  
* rent, lease or lend the software;  
* transfer the software or this agreement to any third party; or  
* use the software for commercial software hosting services.  
  
**8.    EXPORT RESTRICTIONS.** The software is subject to United States export laws and regulations. You must comply with all domestic and international export laws and regulations that apply to the software. These laws include restrictions on destinations, end users and end use. For additional information, see www.microsoft.com/exporting.  
  
**9.    UPDATES.** The software may install automatic updates, which cannot be turned off. By using the software, you agree to receive automatic updates without any additional notice, and permit Microsoft to download and install them for you. You agree to obtain these updates only from Microsoft or Microsoft authorized sources. If you do not want software updates, disconnect your device from the internet or uninstall the software.  
  
**10.   SUPPORT SERVICES.** Because this software is “as is,” we may not provide support services for it.  
  
**11.   ENTIRE AGREEMENT.** This agreement, and the terms for supplements, updates, Internet-based services and support services that you use, are the entire agreement for the software and support services.  
  
**12.   APPLICABLE LAW.**  
  
&nbsp;&nbsp;**a.    United States.** If you acquired the software in the United States, Washington state law governs the interpretation of this agreement and applies to claims for breach of it, regardless of conflict of laws principles. The laws of the state where you live govern all other claims, including claims under state consumer protection laws, unfair competition laws, and in tort.  
  
&nbsp;&nbsp;**b.    Outside the United States.** If you acquired the software in any other country, the laws of that country apply.  
  
**13.   LEGAL EFFECT.** This agreement describes certain legal rights. You may have other rights under the laws of your country. You may also have rights with respect to the party from whom you acquired the software. This agreement does not change your rights under the laws of your country if the laws of your country do not permit it to do so.  
  
**14.   DISCLAIMER OF WARRANTY. The software is licensed “as-is.” You bear the risk of using it. Microsoft gives no express warranties, guarantees or conditions. You may have additional consumer rights or statutory guarantees under your local laws which this agreement cannot change. To the extent permitted under your local laws, Microsoft excludes the implied warranties of merchantability, fitness for a particular purpose and non-infringement.**  
  
&nbsp;&nbsp;FOR AUSTRALIA – You have statutory guarantees under the Australian Consumer Law and nothing in these terms is intended to affect those rights.  
  
**15.   LIMITATION ON AND EXCLUSION OF REMEDIES AND DAMAGES. You can recover from Microsoft and its suppliers only direct damages up to U.S. $5.00. You cannot recover any other damages, including consequential, lost profits, special, indirect or incidental damages.**  
  
This limitation applies to  
* anything related to the software, services, content (including code) on third party Internet sites, or third party programs; and  
* claims for breach of contract, breach of warranty, guarantee or condition, strict liability, negligence, or other tort to the extent permitted by applicable law.  
  
It also applies even if Microsoft knew or should have known about the possibility of the damages. The above limitation or exclusion may not apply to you because your country may not allow the exclusion or limitation of incidental, consequential or other damages.  
  
**Please note: As this software is distributed in Quebec, Canada, these license terms are provided below in French.**  
  
**Remarque : Ce logiciel étant distribué au Québec, Canada, certaines des clauses dans ce contrat sont fournies ci-dessous en français.**  
  
EXCLUSIONS DE GARANTIE. Le logiciel est concédé sous licence « en l’état ». Vous assumez tous les risques liés à son utilisation. Microsoft n’accorde aucune garantie ou condition expresse. Vous pouvez bénéficier de droits des consommateurs supplémentaires dans le cadre du droit local, que ce contrat ne peut modifier. Lorsque cela est autorisé par le droit local, Microsoft exclut les garanties implicites de qualité, d’adéquation à un usage particulier et d’absence de contrefaçon.  
  
LIMITATION ET EXCLUSION DE RECOURS ET DE DOMMAGES. Vous pouvez obtenir de Microsoft et de ses fournisseurs une indemnisation en cas de dommages directs limitée uniquement à hauteur de 5,00 $ US. Vous ne pouvez prétendre à aucune indemnisation pour les autres dommages, y compris les dommages spéciaux, indirects ou accessoires et pertes de bénéfices.  
  
Cette limitation concerne :  
  
toute affaire liée au logiciel, aux services ou au contenu (y compris le code) figurant sur des sites Internet tiers ou dans des programmes tiers et  
  
les réclamations au titre de violation de contrat ou de garantie, ou au titre de responsabilité stricte, de négligence ou d’une autre faute dans la limite autorisée par la loi en vigueur.  
  
Elle s’applique également même si Microsoft connaissait l'éventualité d'un tel dommage. La limitation ou exclusion ci-dessus peut également ne pas vous être applicable, car votre pays n’autorise pas l’exclusion ou la limitation de responsabilité pour les dommages indirects, accessoires ou de quelque nature que ce soit.  
  
EFFET JURIDIQUE. Le présent contrat décrit certains droits juridiques. Vous pourriez avoir d’autres droits prévus par les lois de votre pays. Le présent contrat ne modifie pas les droits que vous confèrent les lois de votre pays si celles-ci ne le permettent pas.

tools\dbatools\bin\third-party-licenses\ThirdPartyNoticesDacFramework.rtf

tools\dbatools\bin\thor.png

tools\dbatools\bin\perfmontemplates\collectorsets\PAL - SQL Server 2008 and R2.xml

<DataCollectorSet>
<Name>PAL - SQL Server 2008 and R2</Name>
<DisplayName>PAL - SQL Server 2008 and R2</DisplayName>
<DisplayNameUnresolved>PAL - SQL Server 2008 and R2</DisplayNameUnresolved>
<Description>Data Collector Sets from PAL, a performance monitor data aggregation tool by Microsoft. The toolset was created by Microsoft PFE Clint Huffman who worked with fellow experts to create a list specialized lists of counters. You can find the project at github.com/clinthuffman/PAL</Description>
<DescriptionUnresolved>Data Collector Sets from PAL, a performance monitor data aggregation tool by Microsoft. The toolset was created by Microsoft PFE Clint Huffman who worked with fellow experts to create a list specialized lists of counters. You can find the project at github.com/clinthuffman/PAL</DescriptionUnresolved>
<SubdirectoryFormat>3</SubdirectoryFormat>
<SubdirectoryFormatPattern>yyyyMMdd\-NNNNNN</SubdirectoryFormatPattern>
<PerformanceCounterDataCollector>
    <Name>PAL - SQL Server 2008 and R2 Collector</Name>
    <SampleInterval>15</SampleInterval>
    <Counter>\Cache\Dirty Pages</Counter>
    <Counter>\Cache\Lazy Write Flushes/sec</Counter>
    <Counter>\LogicalDisk(*)\% Free Space</Counter>
    <Counter>\LogicalDisk(*)\% Idle Time</Counter>
    <Counter>\LogicalDisk(*)\Avg. Disk Bytes/Read</Counter>
    <Counter>\LogicalDisk(*)\Avg. Disk Bytes/Transfer</Counter>
    <Counter>\LogicalDisk(*)\Avg. Disk Bytes/Write</Counter>
    <Counter>\LogicalDisk(*)\Avg. Disk Queue Length</Counter>
    <Counter>\LogicalDisk(*)\Avg. Disk sec/Read</Counter>
    <Counter>\LogicalDisk(*)\Avg. Disk sec/Transfer</Counter>
    <Counter>\LogicalDisk(*)\Avg. Disk sec/Write</Counter>
    <Counter>\LogicalDisk(*)\Current Disk Queue Length</Counter>
    <Counter>\LogicalDisk(*)\Disk Bytes/sec</Counter>
    <Counter>\LogicalDisk(*)\Disk Reads/sec</Counter>
    <Counter>\LogicalDisk(*)\Disk Transfers/sec</Counter>
    <Counter>\LogicalDisk(*)\Disk Writes/sec</Counter>
    <Counter>\LogicalDisk(*)\Free Megabytes</Counter>
    <Counter>\Memory\% Committed Bytes In Use</Counter>
    <Counter>\Memory\Available MBytes</Counter>
    <Counter>\Memory\Commit Limit</Counter>
    <Counter>\Memory\Committed Bytes</Counter>
    <Counter>\Memory\Free &amp; Zero Page List Bytes</Counter>
    <Counter>\Memory\Free System Page Table Entries</Counter>
    <Counter>\Memory\Long-Term Average Standby Cache Lifetime (s)</Counter>
    <Counter>\Memory\Pages Input/sec</Counter>
    <Counter>\Memory\Pages Output/sec</Counter>
    <Counter>\Memory\Pages/sec</Counter>
    <Counter>\Memory\Pool Nonpaged Bytes</Counter>
    <Counter>\Memory\Pool Paged Bytes</Counter>
    <Counter>\Memory\Pool Paged Resident Bytes</Counter>
    <Counter>\Memory\System Cache Resident Bytes</Counter>
    <Counter>\Memory\Transition Pages RePurposed/sec</Counter>
    <Counter>\MSRS 2008 R2 Web Service\Cache Misses/Sec</Counter>
    <Counter>\MSRS 2008 R2 Web Service\Report Requests</Counter>
    <Counter>\MSRS 2008 R2 Web Service\Total Memory Cache Misses</Counter>
    <Counter>\MSRS 2008 R2 Web Service\Total Requests</Counter>
    <Counter>\Network Inspection System\Average inspection latency (sec/bytes)</Counter>
    <Counter>\Network Interface(*)\Bytes Received/sec</Counter>
    <Counter>\Network Interface(*)\Bytes Sent/sec</Counter>
    <Counter>\Network Interface(*)\Bytes Total/sec</Counter>
    <Counter>\Network Interface(*)\Current Bandwidth</Counter>
    <Counter>\Network Interface(*)\Output Queue Length</Counter>
    <Counter>\Network Interface(*)\Packets Outbound Errors</Counter>
    <Counter>\Network Interface(*)\Packets Received/sec</Counter>
    <Counter>\Network Interface(*)\Packets Sent/sec</Counter>
    <Counter>\Network Interface(*)\Packets/sec</Counter>
    <Counter>\Paging File(*)\% Usage</Counter>
    <Counter>\PhysicalDisk(*)\Avg. Disk Queue Length</Counter>
    <Counter>\PhysicalDisk(*)\Avg. Disk sec/Read</Counter>
    <Counter>\PhysicalDisk(*)\Avg. Disk sec/Write</Counter>
    <Counter>\PhysicalDisk(*)\Current Disk Queue Length</Counter>
    <Counter>\PhysicalDisk(*)\Disk Bytes/sec</Counter>
    <Counter>\Process(*)\Handle Count</Counter>
    <Counter>\Process(*)\ID Process</Counter>
    <Counter>\Process(*)\IO Data Operations/sec</Counter>
    <Counter>\Process(*)\IO Other Operations/sec</Counter>
    <Counter>\Process(*)\IO Read Operations/sec</Counter>
    <Counter>\Process(*)\IO Write Operations/sec</Counter>
    <Counter>\Process(*)\Private Bytes</Counter>
    <Counter>\Process(*)\Thread Count</Counter>
    <Counter>\Process(*)\Virtual Bytes</Counter>
    <Counter>\Process(*)\Working Set</Counter>
    <Counter>\Process(sqlservr)\% Privileged Time</Counter>
    <Counter>\Process(sqlservr)\% Processor Time</Counter>
    <Counter>\Processor Information(*)\% DPC Time</Counter>
    <Counter>\Processor Information(*)\% Interrupt Time</Counter>
    <Counter>\Processor Information(*)\% of Maximum Frequency</Counter>
    <Counter>\Processor Information(*)\% Privileged Time</Counter>
    <Counter>\Processor Information(*)\% Processor Time</Counter>
    <Counter>\Processor Information(*)\% User Time</Counter>
    <Counter>\Processor Information(*)\DPC Rate</Counter>
    <Counter>\Processor Information(*)\Parking Status</Counter>
    <Counter>\Processor(*)\% DPC Time</Counter>
    <Counter>\Processor(*)\% Interrupt Time</Counter>
    <Counter>\Processor(*)\% Privileged Time</Counter>
    <Counter>\Processor(*)\% Processor Time</Counter>
    <Counter>\Processor(*)\% User Time</Counter>
    <Counter>\Processor(*)\DPC Rate</Counter>
    <Counter>\ReportServer:Service\Errors Total</Counter>
    <Counter>\ReportServer:Service\Errors/sec</Counter>
    <Counter>\ReportServer:Service\Memory Pressure State</Counter>
    <Counter>\ReportServer:Service\Memory Shrink Amount</Counter>
    <Counter>\ReportServer:Service\Memory Shrink Notifications/sec</Counter>
    <Counter>\Server\Pool Nonpaged Failures</Counter>
    <Counter>\Server\Pool Paged Failures</Counter>
    <Counter>\SQLAgent:Jobs\Active jobs</Counter>
    <Counter>\SQLAgent:Jobs\Failed jobs</Counter>
    <Counter>\SQLAgent:Jobs\Job success rate</Counter>
    <Counter>\SQLAgent:Jobs\Successful jobs</Counter>
    <Counter>\SQLAgent:JobSteps\Active steps</Counter>
    <Counter>\SQLAgent:JobSteps\Total step retries</Counter>
    <Counter>\SQLServer:Access Methods\Forwarded Records/sec</Counter>
    <Counter>\SQLServer:Access Methods\FreeSpace Scans/sec</Counter>
    <Counter>\SQLServer:Access Methods\Full Scans/sec</Counter>
    <Counter>\SQLServer:Access Methods\Index Searches/sec</Counter>
    <Counter>\SQLServer:Access Methods\Page Splits/sec</Counter>
    <Counter>\SQLServer:Access Methods\Scan Point Revalidations/sec</Counter>
    <Counter>\SQLServer:Access Methods\Table Lock Escalations/sec</Counter>
    <Counter>\SQLServer:Access Methods\Workfiles Created/sec</Counter>
    <Counter>\SQLServer:Access Methods\Worktables Created/sec</Counter>
    <Counter>\SQLServer:Access Methods\Worktables From Cache Ratio</Counter>
    <Counter>\SQLServer:Buffer Manager\Buffer cache hit ratio</Counter>
    <Counter>\SQLServer:Buffer Manager\Checkpoint pages/sec</Counter>
    <Counter>\SQLServer:Buffer Manager\Free list stalls/sec</Counter>
    <Counter>\SQLServer:Buffer Manager\Free pages</Counter>
    <Counter>\SQLServer:Buffer Manager\Lazy writes/sec</Counter>
    <Counter>\SQLServer:Buffer Manager\Page life expectancy</Counter>
    <Counter>\SQLServer:Buffer Manager\Page lookups/sec</Counter>
    <Counter>\SQLServer:Buffer Manager\Page reads/sec</Counter>
    <Counter>\SQLServer:Buffer Manager\Page writes/sec</Counter>
    <Counter>\SQLServer:Buffer Manager\Readahead pages/sec</Counter>
    <Counter>\SQLServer:Buffer Manager\Stolen pages</Counter>
    <Counter>\SQLServer:Buffer Node(*)\Foreign pages</Counter>
    <Counter>\SQLServer:Buffer Node(*)\Page life expectancy</Counter>
    <Counter>\SQLServer:Databases(*)\Data File(s) Size (KB)</Counter>
    <Counter>\SQLServer:Databases(*)\Log Bytes Flushed/sec</Counter>
    <Counter>\SQLServer:Databases(*)\Log File(s) Size (KB)</Counter>
    <Counter>\SQLServer:Databases(*)\Log File(s) Used Size (KB)</Counter>
    <Counter>\SQLServer:Databases(*)\Log Flush Wait Time</Counter>
    <Counter>\SQLServer:Databases(*)\Log Flush Waits/sec</Counter>
    <Counter>\SQLServer:Databases(*)\Log Flushes/sec</Counter>
    <Counter>\SQLServer:Databases(*)\Log Growths</Counter>
    <Counter>\SQLServer:Databases(*)\Log Shrinks</Counter>
    <Counter>\SQLServer:Databases(*)\Log Truncations</Counter>
    <Counter>\SQLServer:Databases(*)\Percent Log Used</Counter>
    <Counter>\SQLServer:Deprecated Features(*)\Usage</Counter>
    <Counter>\SQLServer:General Statistics\Logins/sec</Counter>
    <Counter>\SQLServer:General Statistics\Logouts/sec</Counter>
    <Counter>\SQLServer:General Statistics\User Connections</Counter>
    <Counter>\SQLServer:Latches\Latch Waits/sec</Counter>
    <Counter>\SQLServer:Latches\Total Latch Wait Time (ms)</Counter>
    <Counter>\SQLServer:Locks(*)\Average Wait Time (ms)</Counter>
    <Counter>\SQLServer:Locks(*)\Lock Requests/sec</Counter>
    <Counter>\SQLServer:Locks(*)\Lock Timeouts/sec</Counter>
    <Counter>\SQLServer:Locks(*)\Lock Wait Time (ms)</Counter>
    <Counter>\SQLServer:Locks(*)\Lock Waits/sec</Counter>
    <Counter>\SQLServer:Locks(*)\Number of Deadlocks/sec</Counter>
    <Counter>\SQLServer:Memory Manager\Granted Workspace Memory (KB)</Counter>
    <Counter>\SQLServer:Memory Manager\Maximum Workspace Memory (KB)</Counter>
    <Counter>\SQLServer:Memory Manager\Memory Grants Outstanding</Counter>
    <Counter>\SQLServer:Memory Manager\Memory Grants Pending</Counter>
    <Counter>\SQLServer:Memory Manager\Target Server Memory(KB)</Counter>
    <Counter>\SQLServer:Memory Manager\Total Server Memory (KB)</Counter>
    <Counter>\SQLServer:Plan Cache(*)\Cache Hit Ratio</Counter>
    <Counter>\SQLServer:Resource Pool Stats(*)\CPU usage %</Counter>
    <Counter>\SQLServer:Resource Pool Stats(*)\Max memory (KB)</Counter>
    <Counter>\SQLServer:Resource Pool Stats(*)\Target memory (KB)</Counter>
    <Counter>\SQLServer:Resource Pool Stats(*)\Used memory (KB)</Counter>
    <Counter>\SQLServer:SQL Errors(*)\Errors/sec</Counter>
    <Counter>\SQLServer:SQL Statistics\Auto-Param Attempts/sec</Counter>
    <Counter>\SQLServer:SQL Statistics\Batch Requests/sec</Counter>
    <Counter>\SQLServer:SQL Statistics\Failed Auto-Params/sec</Counter>
    <Counter>\SQLServer:SQL Statistics\Safe Auto-Params/sec</Counter>
    <Counter>\SQLServer:SQL Statistics\SQL Attention rate</Counter>
    <Counter>\SQLServer:SQL Statistics\SQL Compilations/sec</Counter>
    <Counter>\SQLServer:SQL Statistics\SQL Re-Compilations/sec</Counter>
    <Counter>\SQLServer:SQL Statistics\Unsafe Auto-Params/sec</Counter>
    <Counter>\SQLServer:SSIS Pipeline 10.0\Buffer memory</Counter>
    <Counter>\SQLServer:SSIS Pipeline 10.0\Buffers in use</Counter>
    <Counter>\SQLServer:SSIS Pipeline 10.0\Buffers spooled</Counter>
    <Counter>\SQLServer:SSIS Pipeline 10.0\Flat buffers in use</Counter>
    <Counter>\SQLServer:SSIS Pipeline 10.0\Private buffers in use</Counter>
    <Counter>\SQLServer:Transactions\Free Space in tempdb (KB)</Counter>
    <Counter>\SQLServer:Transactions\Longest Transaction Running Time</Counter>
    <Counter>\SQLServer:Transactions\NonSnapshot Version Transactions</Counter>
    <Counter>\SQLServer:Transactions\Snapshot Transactions</Counter>
    <Counter>\SQLServer:Transactions\Version Cleanup rate (KB/s)</Counter>
    <Counter>\SQLServer:Transactions\Version Generation rate (KB/s)</Counter>
    <Counter>\SQLServer:Workload Group Stats(*)\CPU usage %</Counter>
    <Counter>\SQLServer:Workload Group Stats(*)\Queued requests</Counter>
    <Counter>\SQLServer:Workload Group Stats(*)\Requests completed/sec</Counter>
    <Counter>\System\Context Switches/sec</Counter>
    <Counter>\System\Processor Queue Length</Counter>
    <Counter>\System\System Calls/sec</Counter>
    <Counter>\TCPv4\Connection Failures</Counter>
</PerformanceCounterDataCollector>
</DataCollectorSet>

tools\dbatools\bin\PSScriptAnalyzerRules.psd1

@{
    IncludeRules = @(
                    'PSAvoidUsingCmdletAliases',
                    'PSAvoidUsingWriteHost',
                    'PSAvoidDefaultValueSwitchParameter',
                    'PSReservedCmdletChar',
                    'PSReservedParams',
                    'PSAvoidUsingUserNameAndPassWordParams',
                    'PSAvoidUsingPlaintTextForPassword',
                    'PSAvoidUsingWMICmdlet',
                    'PSAvoidUsingWriteHost',
                    'PSMisleadingBacktick',
                    'PSMissingModuleMainifestField',
                    'PSPossibleIncorrectComparisonWithNull',
                    'PSUseApprovedVerbs',
                    'PSUseOutputTypeCorrectly',
                    'PSShouldProcess',
                    'PSUserToExportFieldsInManifest',
                    'PSUseSingularNouns',
                    'PSAvoidUsingInvokeExpression',
                    'PSUseShouldProcessForStateChangingFunctions',
                    'PSUseDeclaredVarsMoreThanAssignments'
                    )
}

tools\dbatools\bin\smo\coreclr\Microsoft.SqlServer.Management.Dmf.dll

md5: E67B50A873949BA1FFDD48DF0AC04DEC | sha1: 664B57EFFC0128B6396545CDE4852DB50BFC6EF8 | sha256: 3CE94BD138CAF3BB208809DA90BB38E5EC6172470C567717184CC0CDC964B43D | sha512: D36AE3C6096E533579D69DC11DC637C89B96BABEFFC4B9D85F595CBF62745A54AA130894F7BDF32991A1B86E537A8EB5F336CDA54DAD92C15C48BD4B465D617F

tools\dbatools\bin\smo\coreclr\Microsoft.SqlServer.SqlEnum.dll

md5: F4E0078E482C8A26FB8E1BB767B22C68 | sha1: 0030462F3F7CC23FE406DDF32BDC2C9DD51E724A | sha256: CE00B225FF860295DA3CCCAEFA2730EA2D96C35C4D84F49189DC282FE3665219 | sha512: FF5CF7666B0EBE6CCF4A2FD66364708BEB3D584B4B895EC3BE48FADECE152FA40E068F07BA8C43EE2714867652CB164F755B3E61D3F1BE603CE7AA40EBCECD1C

tools\dbatools\bin\smo\Microsoft.Data.Tools.Contracts.dll

md5: E388AB530054F8C12D01549D1106F57D | sha1: 5BD95EF1303E453B75E443D3E3F6CEB9C327C767 | sha256: 0570A8B2D205954D402DAC7CDE1C5D52C3774E6D96404959D5DD70FAA6248D52 | sha512: 03C5ACB9A4C0E5A49C3B86E2ABAE2B11485BD644E44B157E89B59C716945DB69F6BC2538BF744B6AA0C5B9F39D645B7ECC778BC12F804772F6AE4381E3622357

tools\dbatools\bin\smo\Microsoft.SqlServer.ConnectionInfo.dll

md5: 7446B5C8FFCBA09039ABF785D1BB4A88 | sha1: 6AD988335E008315F06A43A722DF69AB5B4722F0 | sha256: 3407221FE6F297E845AEB91A4886BB7B268A79CA2A73E273BDC2D36ECA26ADA6 | sha512: 752433FCFAE9F16292B07F18A9416A7FE786F82038BB7E0C30E79FD1B2ED68BC9DB60143B68F29B05CE412DB8ACE34E3A7609CDBE0FF14B0AB28AEEE98A43CB9

tools\dbatools\bin\smo\Microsoft.SqlServer.Management.AlwaysEncrypted.Types.dll

md5: 48A4AB642B38CE7A622393F14CF7FE3D | sha1: AE4D13678665596300E674B42F234CB31B4C2951 | sha256: B18D0599D9F09E0BFD994B738985CFB9BC9B16222E007520866532EBC23BBAF4 | sha512: C9ED2BAA2F57922394DC6EE69D246E889454B83994E46C579751007E02B148DB5854C1C874134BAB6B4BA99FD19C5B229FB8796683A2C7AC0B3E4485EC1CEC12

tools\dbatools\bin\smo\Microsoft.SqlServer.Management.IntegrationServicesEnum.dll

md5: 277465E94385E56877A2DD957576CB64 | sha1: 15A7EB00B77509DCF0536C1630DD4DA14AAF8B44 | sha256: DB4546E7CAD2261223EA2C47CC4BAAE99F694085D9348F370DF1CADF46FA0075 | sha512: D2903B3BDF1C96CC35B29A379482EB453F3F36C4BF8228C38412CA6CA7FC2F8FE5F61ADEEF4AC37DAE239E8AF73A86A8E6108630B7D71A7AFB35DD466A609610

tools\dbatools\bin\smo\Microsoft.SqlServer.Management.XEventDbScopedEnum.dll

md5: 1E712AF4C36FB1E35F9BF79CA217E159 | sha1: FFEBD9FCB08005A35FA53963183B9E661F9B2263 | sha256: B3EAC5B9B2B5D608861FFDAAC7F788E027EE4329949621FFEC709DBD4D2232E9 | sha512: 2C1F9F494BD6F2551FC9083BE629DD840C68AA7C5E37323F071E0F5DFA239A6EAA6630ADCB7A46B73E8397C2529A595074BBE16CAB596D2F38DADED02BC857DB

tools\dbatools\bin\smo\Microsoft.SqlServer.Smo.dll

md5: 6097BEBF3019EB269D6F0182899FDB51 | sha1: 90859109A74C7EAADD3D8E0A7BBC88198604F397 | sha256: F447685772B53977788255529661E372E43BB5FB776115E284BFD1A822E9E0C8 | sha512: 9AD640031D6323B4C90AE4968B45C1894FF4DEDD8B518FFF268FDE2C13E7E916EA9633F5BFDAEDE3C559E8436B72B3D511CB0B5C0FC0CF4F447511BC7F0D392F

tools\dbatools\bin\smo\Microsoft.SqlServer.XE.Core.dll

md5: E2534DF2B4AAAD8D152A4436B141F895 | sha1: 1EE6EA02FC5CF603FAFDCA4DF8587F467E66402C | sha256: 74013AB7594C22571AE440D348EB2280B1DEA3187E362281769593D21625A731 | sha512: 4532E4B44D354C423855A94D8812EC7F183234D9992CD030E939621888109FE8DDECF9BFBFBEF162FE3D4B1C6C578D23103963EC03EEACF0FD6447418B7C6250

tools\dbatools\bin\dbatools.dll

md5: 06F6DB200D28C91D1E68F4C18C9102C9 | sha1: 3D72A105EFA68845B1CDBEEEEAD76DA7ACF160DB | sha256: C1A33D435B99AA2B9C8ADCA482CC7387DCC0A391819C4C6CA3359E1F349A1B25 | sha512: 8F7F17D4454EA33C31C0041B0006E8774A6E0C1A97F7218B72C1435CBA71E3BA9ADEB5917FEACC003B97A1C63DDB9ADC4EA0CA4D001C12650256EC5E3E3E598F

tools\dbatools\bin\dbatools-index.json

[
    {
        "CommandName":  "Add-DbaAgDatabase",
        "Description":  "Adds a database to an availability group on a SQL Server instance.\n\nBefore joining the replica databases to the availablity group, the databases will be initialized with automatic seeding or full/log backup.",
        "Tags":  [
                     "AvailabilityGroup",
                     "HA",
                     "AG"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. Server version must be SQL Server version 2012 or higher.\nThis should be the primary replica.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the SqlInstance instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AvailabilityGroup",
                           "The availability group where the databases will be added.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database or databases to add.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Secondary",
                           "Not required - the command will figure this out. But if you\u0027d like to be explicit about replicas, this will help.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SecondarySqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Enables piping from Get-DbaDatabase, Get-DbaDbSharePoint and more.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SeedingMode",
                           "Specifies how the secondary replica will be initially seeded.\nAutomatic enables direct seeding. This method will seed the secondary replica over the network. This method does not require you to backup and restore a copy of the primary database on the replica.\nManual requires you to create a backup of the database on the primary replica and manually restore that backup on the secondary replica.\nIf not specified, the setting from the availability group replica will be used. Otherwise the setting will be updated.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SharedPath",
                           "The network share where the backups will be backed up and restored from.\nEach SQL Server service account must have access to this share.\nNOTE: If a backup / restore is performed, the backups will be left in tact on the network share.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "UseLastBackup",
                           "Use the last full backup of database.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Adds a database to an availability group on a SQL Server instance.",
        "Name":  "Add-DbaAgDatabase",
        "Links":  "https://dbatools.io/Add-DbaAgDatabase",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eAdd-DbaAgDatabase -SqlInstance sql2017a -AvailabilityGroup ag1 -Database db1, db2 -Confirm\nAdds db1 and db2 to ag1 on sql2017a. Prompts for confirmation.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDatabase -SqlInstance sql2017a | Out-GridView -Passthru | Add-DbaAgDatabase -AvailabilityGroup ag1\nAdds selected databases from sql2017a to ag1\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaDbSharePoint -SqlInstance sqlcluster | Add-DbaAgDatabase -AvailabilityGroup SharePoint\nAdds SharePoint databases as found in SharePoint_Config on sqlcluster to ag1 on sqlcluster\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaDbSharePoint -SqlInstance sqlcluster -ConfigDatabase SharePoint_Config_2019 | Add-DbaAgDatabase -AvailabilityGroup SharePoint\nAdds SharePoint databases as found in SharePoint_Config_2019 on sqlcluster to ag1 on sqlcluster",
        "Syntax":  "Add-DbaAgDatabase [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [-AvailabilityGroup] \u003cString\u003e [[-Database] \u003cString[]\u003e] [[-Secondary] \u003cDbaInstanceParameter[]\u003e] [[-SecondarySqlCredential] \u003cPSCredential\u003e] [[-InputObject] \u003cDatabase[]\u003e] [[-SeedingMode] \u003cString\u003e] [[-SharedPath] \u003cString\u003e] [-UseLastBackup] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Add-DbaAgListener",
        "Description":  "Adds a listener to an availability group on a SQL Server instance.",
        "Tags":  [
                     "AvailabilityGroup",
                     "HA",
                     "AG"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. Server version must be SQL Server version 2012 or higher.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the SqlInstance instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AvailabilityGroup",
                           "The Availability Group to which a listener will be bestowed upon.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "IPAddress",
                           "Sets the IP address of the availability group listener.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SubnetMask",
                           "Sets the subnet IP mask of the availability group listener. Defaults to 255.255.255.0.",
                           "",
                           false,
                           "false",
                           "255.255.255.0"
                       ],
                       [
                           "Port",
                           "Sets the port number used to communicate with the availability group. Defaults to 1433.",
                           "",
                           false,
                           "false",
                           "1433"
                       ],
                       [
                           "Dhcp",
                           "Indicates whether the listener uses DHCP.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Passthru",
                           "Don\u0027t create the listener, just pass thru an object that can be further customized before creation.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "InputObject",
                           "Enables piping from Get-DbaAvailabilityGroup",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Adds a listener to an availability group on a SQL Server instance.",
        "Name":  "Add-DbaAgListener",
        "Links":  "https://dbatools.io/Add-DbaAgListener",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eAdd-DbaAgListener -SqlInstance sql2017 -AvailabilityGroup SharePoint -IPAddress 10.0.20.20\nCreates a listener on 10.0.20.20 port 1433 for the SharePoint availability group on sql2017.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaAvailabilityGroup -SqlInstance sql2017 -AvailabilityGroup availabilitygroup1 | Add-DbaAgListener -Dhcp\nCreates a listener on port 1433 with a dynamic IP for the group1 availability group on sql2017.",
        "Syntax":  "Add-DbaAgListener [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-AvailabilityGroup] \u003cString[]\u003e] [[-IPAddress] \u003cIPAddress\u003e] [[-SubnetMask] \u003cIPAddress\u003e] [[-Port] \u003cInt32\u003e] [-Dhcp] [-Passthru] [[-InputObject] \u003cAvailabilityGroup[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Add-DbaAgReplica",
        "Description":  "Adds a replica to an availability group on a SQL Server instance.\n\nAutomatically creates a database mirroring endpoint if required.",
        "Tags":  [
                     "AvailabilityGroup",
                     "HA",
                     "AG"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. Server version must be SQL Server version 2012 or higher.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the SqlInstance instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Name",
                           "The name of the replica. Defaults to the SQL Server instance name.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AvailabilityMode",
                           "Sets the availability mode of the availability group replica. Options are: AsynchronousCommit and SynchronousCommit. SynchronousCommit is default.",
                           "",
                           false,
                           "false",
                           "SynchronousCommit"
                       ],
                       [
                           "FailoverMode",
                           "Sets the failover mode of the availability group replica. Options are Automatic and Manual. Automatic is default.",
                           "",
                           false,
                           "false",
                           "Automatic"
                       ],
                       [
                           "BackupPriority",
                           "Sets the backup priority availability group replica. Default is 50.",
                           "",
                           false,
                           "false",
                           "50"
                       ],
                       [
                           "ConnectionModeInPrimaryRole",
                           "Specifies the connection intent modes of an Availability Replica in primary role. AllowAllConnections by default.",
                           "",
                           false,
                           "false",
                           "AllowAllConnections"
                       ],
                       [
                           "ConnectionModeInSecondaryRole",
                           "Specifies the connection modes of an Availability Replica in secondary role. AllowAllConnections by default.",
                           "",
                           false,
                           "false",
                           "AllowAllConnections"
                       ],
                       [
                           "SeedingMode",
                           "Specifies how the secondary replica will be initially seeded.\nAutomatic enables direct seeding. This method will seed the secondary replica over the network. This method does not require you to backup and restore a copy of the primary database on the replica.\nManual requires you to create a backup of the database on the primary replica and manually restore that backup on the secondary replica.",
                           "",
                           false,
                           "false",
                           "Automatic"
                       ],
                       [
                           "Endpoint",
                           "By default, this command will attempt to find a DatabaseMirror endpoint. If one does not exist, it will create it.\nIf an endpoint must be created, the name \"hadr_endpoint\" will be used. If an alternative is preferred, use Endpoint.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Passthru",
                           "Don\u0027t create the replica, just pass thru an object that can be further customized before creation.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "ReadonlyRoutingConnectionUrl",
                           "Sets the read only routing connection url for the availability replica.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Certificate",
                           "Specifies that the endpoint is to authenticate the connection using the certificate specified by certificate_name to establish identity for authorization.\nThe far endpoint must have a certificate with the public key matching the private key of the specified certificate.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Enables piping from Get-DbaAvailabilityGroup.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Adds a replica to an availability group on a SQL Server instance.",
        "Name":  "Add-DbaAgReplica",
        "Links":  "https://dbatools.io/Add-DbaAgReplica",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaAvailabilityGroup -SqlInstance sql2017a -AvailabilityGroup SharePoint | Add-DbaAgReplica -SqlInstance sql2017b\nAdds sql2017b to the SharePoint availability group on sql2017a\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaAvailabilityGroup -SqlInstance sql2017a -AvailabilityGroup SharePoint | Add-DbaAgReplica -SqlInstance sql2017b -FailoverMode Manual\nAdds sql2017b to the SharePoint availability group on sql2017a with a manual failover mode.",
        "Syntax":  "Add-DbaAgReplica [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Name] \u003cString\u003e] [[-AvailabilityMode] \u003cString\u003e] [[-FailoverMode] \u003cString\u003e] [[-BackupPriority] \u003cInt32\u003e] [[-ConnectionModeInPrimaryRole] \u003cString\u003e] [[-ConnectionModeInSecondaryRole] \u003cString\u003e] [[-SeedingMode] \u003cString\u003e] [[-Endpoint] \u003cString\u003e] [-Passthru] [[-ReadonlyRoutingConnectionUrl] \u003cString\u003e] [[-Certificate] \u003cString\u003e] [-InputObject] \u003cAvailabilityGroup\u003e [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Add-DbaCmsRegServer",
        "Description":  "Adds registered servers to SQL Server Central Management Server (CMS). If you need more flexiblity, look into Import-DbaCmsRegServer which\naccepts multiple kinds of input and allows you to add reg servers from different CMSes.",
        "Tags":  [
                     "RegisteredServer",
                     "CMS"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance",
                           "ServerInstance,SqlServer",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ServerName",
                           "Server Name is the actual SQL instance name (labeled Server Name)",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "Name",
                           "Name is basically the nickname in SSMS CMS interface (labeled Registered Server Name)",
                           "",
                           false,
                           "false",
                           "$ServerName"
                       ],
                       [
                           "Description",
                           "Adds a description for the registered server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Group",
                           "Adds the registered server to a specific group.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Allows the piping of a registered server group",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Add-DbaRegisteredServer",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Adds registered servers to SQL Server Central Management Server (CMS)",
        "Name":  "Add-DbaCmsRegServer",
        "Links":  "https://dbatools.io/Add-DbaCmsRegServer",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eAdd-DbaCmsRegServer -SqlInstance sql2008 -ServerName sql01\nCreates a registered server on sql2008\u0027s CMS which points to the SQL Server, sql01. When scrolling in CMS, the name \"sql01\" will be visible.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eAdd-DbaCmsRegServer -SqlInstance sql2008 -ServerName sql01 -Name \"The 2008 Clustered Instance\" -Description \"HR\u0027s Dedicated SharePoint instance\"\nCreates a registered server on sql2008\u0027s CMS which points to the SQL Server, sql01. When scrolling in CMS, \"The 2008 Clustered Instance\" will be visible.\r\nClearly this is hard to explain ;)\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eAdd-DbaCmsRegServer -SqlInstance sql2008 -ServerName sql01 -Group hr\\Seattle\nCreates a registered server on sql2008\u0027s CMS which points to the SQL Server, sql01. When scrolling in CMS, the name \"sql01\" will be visible within the Seattle group which is in the hr group.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaCmsRegServerGroup -SqlInstance sql2008 -Group hr\\Seattle | Add-DbaCmsRegServer -ServerName sql01111\nCreates a registered server on sql2008\u0027s CMS which points to the SQL Server, sql01. When scrolling in CMS, the name \"sql01\" will be visible within the Seattle group which is in the hr group.",
        "Syntax":  "Add-DbaCmsRegServer [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [-ServerName] \u003cString\u003e [[-Name] \u003cString\u003e] [[-Description] \u003cString\u003e] [[-Group] \u003cObject\u003e] [[-InputObject] \u003cServerGroup[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Add-DbaCmsRegServerGroup",
        "Description":  "Adds registered server groups to SQL Server Central Management Server (CMS). If you need more flexibility, look into Import-DbaCmsRegServer which accepts multiple kinds of input and allows you to add reg servers and groups from different CMS.",
        "Tags":  [
                     "RegisteredServer",
                     "CMS"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance",
                           "ServerInstance,SqlServer",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Name",
                           "The name of the registered server group",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "Description",
                           "The description for the registered server group",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Group",
                           "The SQL Server Central Management Server group. If no groups are specified, the new group will be created at the root.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Allows results from Get-DbaCmsRegServerGroup to be piped in",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Add-DbaRegisteredServerGroup",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Adds registered server groups to SQL Server Central Management Server (CMS)",
        "Name":  "Add-DbaCmsRegServerGroup",
        "Links":  "https://dbatools.io/Add-DbaCmsRegServerGroup",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eAdd-DbaCmsRegServerGroup -SqlInstance sql2012 -Name HR\nCreates a registered server group called HR, in the root of sql2012\u0027s CMS\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eAdd-DbaCmsRegServerGroup -SqlInstance sql2012, sql2014 -Name sub-folder -Group HR\nCreates a registered server group on sql2012 and sql2014 called sub-folder within the HR group\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaCmsRegServerGroup -SqlInstance sql2012, sql2014 -Group HR | Add-DbaCmsRegServerGroup -Name sub-folder\nCreates a registered server group on sql2012 and sql2014 called sub-folder within the HR group of each server",
        "Syntax":  "Add-DbaCmsRegServerGroup [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [-Name] \u003cString\u003e [[-Description] \u003cString\u003e] [[-Group] \u003cString\u003e] [[-InputObject] \u003cServerGroup[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Add-DbaComputerCertificate",
        "Description":  "Adds a computer certificate from a local or remote computer.",
        "Tags":  "Certificate",
        "Params":  [
                       [
                           "ComputerName",
                           "The target SQL Server instance or instances. Defaults to localhost.",
                           "ServerInstance,SqlServer,SqlInstance",
                           false,
                           "false",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Allows you to login to $ComputerName using alternative credentials.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SecurePassword",
                           "The password for the certificate, if it is password protected.",
                           "Password",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Certificate",
                           "The target certificate object.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Path",
                           "The local path to the target certificate object.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Store",
                           "Certificate store. Default is LocalMachine.",
                           "",
                           false,
                           "false",
                           "LocalMachine"
                       ],
                       [
                           "Folder",
                           "Certificate folder. Default is My (Personal).",
                           "",
                           false,
                           "false",
                           "My"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Adds a computer certificate - useful for older systems.",
        "Name":  "Add-DbaComputerCertificate",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eAdd-DbaComputerCertificate -ComputerName Server1 -Path C:\\temp\\cert.cer\nAdds the local C:\\temp\\cert.cer to the remote server Server1 in LocalMachine\\My (Personal).\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eAdd-DbaComputerCertificate -Path C:\\temp\\cert.cer\nAdds the local C:\\temp\\cert.cer to the local computer\u0027s LocalMachine\\My (Personal) certificate store.",
        "Syntax":  "Add-DbaComputerCertificate [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [[-SecurePassword] \u003cSecureString\u003e] [[-Certificate] \u003cX509Certificate2[]\u003e] [[-Path] \u003cString\u003e] [[-Store] \u003cString\u003e] [[-Folder] \u003cString\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Add-DbaDbMirrorMonitor",
        "Description":  "Creates a database mirroring monitor job that periodically updates the mirroring status for every mirrored database on the server instance.\n\nBasically executes sp_dbmmonitoraddmonitoring.",
        "Tags":  [
                     "Mirror",
                     "HA"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternate Windows or SQL Login Authentication. Accepts credential objects (Get-Credential).",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Creates a database mirroring monitor job that periodically updates the mirroring status for every mirrored database on the server instance.",
        "Name":  "Add-DbaDbMirrorMonitor",
        "Links":  "https://dbatools.io/Add-DbaDbMirrorMonitor",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eAdd-DbaDbMirrorMonitor -SqlInstance sql2008, sql2012\nCreates a database mirroring monitor job that periodically updates the mirroring status for every mirrored database on sql2008 and sql2012.",
        "Syntax":  "Add-DbaDbMirrorMonitor [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Add-DbaPfDataCollectorCounter",
        "Description":  "Adds a Performance Data Collector Counter.",
        "Tags":  "PerfMon",
        "Params":  [
                       [
                           "ComputerName",
                           "The target computer. Defaults to localhost.",
                           "",
                           false,
                           "false",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Allows you to login to $ComputerName using alternative credentials. To use:\n$cred = Get-Credential, then pass $cred object to the -Credential parameter.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "CollectorSet",
                           "The Collector Set name.",
                           "DataCollectorSet",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Collector",
                           "The Collector name.",
                           "DataCollector",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Counter",
                           "The Counter name. This must be in the form of \u0027\\Processor(_Total)\\% Processor Time\u0027.",
                           "Name",
                           true,
                           "true (ByPropertyName)",
                           ""
                       ],
                       [
                           "InputObject",
                           "Accepts the object output by Get-DbaPfDataCollector via the pipeline.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Adds a Performance Data Collector Counter.",
        "Name":  "Add-DbaPfDataCollectorCounter",
        "Links":  "https://dbatools.io/Add-DbaPfDataCollectorCounter",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eAdd-DbaPfDataCollectorCounter -ComputerName sql2017 -CollectorSet \u0027System Correlation\u0027 -Collector DataCollector01  -Counter \u0027\\LogicalDisk(*)\\Avg. Disk Queue Length\u0027\nAdds the \u0027\\LogicalDisk(*)\\Avg. Disk Queue Length\u0027 counter within the DataCollector01 collector within the System Correlation collector set on sql2017.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaPfDataCollector | Out-GridView -PassThru | Add-DbaPfDataCollectorCounter -Counter \u0027\\LogicalDisk(*)\\Avg. Disk Queue Length\u0027 -Confirm\nAllows you to select which Data Collector you\u0027d like to add the counter \u0027\\LogicalDisk(*)\\Avg. Disk Queue Length\u0027 on localhost and prompts for confirmation.",
        "Syntax":  "Add-DbaPfDataCollectorCounter [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [[-CollectorSet] \u003cString[]\u003e] [[-Collector] \u003cString[]\u003e] [-Counter] \u003cObject[]\u003e [[-InputObject] \u003cObject[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Backup-DbaDatabase",
        "Description":  "Performs a backup of a specified type of 1 or more databases on a single SQL Server Instance. These backups may be Full, Differential or Transaction log backups.",
        "Tags":  [
                     "DisasterRecovery",
                     "Backup",
                     "Restore"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The SQL Server instance hosting the databases to be backed up.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Credentials to connect to the SQL Server instance if the calling user does not have permission.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process. This list is auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude. This list is auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "BackupDirectory",
                           "Path in which to place the backup files. If not specified, the backups will be placed in the default backup location for SqlInstance.\r\nIf multiple paths are specified, the backups will be striped across these locations. This will overwrite the FileCount option.\nIf the path does not exist, Sql Server will attempt to create it. Folders are created by the Sql Instance, and checks will be made for write permissions.\nFile Names with be suffixed with x-of-y to enable identifying striped sets, where y is the number of files in the set and x ranges from 1 to y.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "BackupFileName",
                           "The name of the file to backup to. This is only accepted for single database backups.\r\nIf no name is specified then the backup files will be named DatabaseName_yyyyMMddHHmm (i.e. \"Database1_201714022131\") with the appropriate extension.\nIf the same name is used repeatedly, SQL Server will add backups to the same file at an incrementing position.\nSQL Server needs permissions to write to the specified location. Path names are based on the SQL Server (C:\\ is the C drive on the SQL Server, not the machine running the script).\nPassing in NUL as the BackupFileName will backup to the NUL: device",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ReplaceInName",
                           "If this switch is set, the following list of strings will be replaced in the BackupFileName and BackupDirectory strings:\r\n    instancename - will be replaced with the instance Name\r\n    servername - will be replaced with the server name\r\n    dbname - will be replaced with the database name\r\n    timestamp - will be replaced with the timestamp (either the default, or the format provided)\r\n    backuptype - will be replaced with Full, Log or Differential as appropriate",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "CopyOnly",
                           "If this switch is enabled, CopyOnly backups will be taken. By default function performs a normal backup, these backups interfere with the restore chain of the database. CopyOnly backups will not \r\ninterfere with the restore chain of the database.\nFor more details please refer to this MSDN article - https://msdn.microsoft.com/en-us/library/ms191495.aspx",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Type",
                           "The type of SQL Server backup to perform. Accepted values are \"Full\", \"Log\", \"Differential\", \"Diff\", \"Database\"",
                           "",
                           false,
                           "false",
                           "Database"
                       ],
                       [
                           "InputObject",
                           "Internal parameter",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "CreateFolder",
                           "If this switch is enabled, each database will be backed up into a separate folder on each of the paths specified by BackupDirectory.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "FileCount",
                           "This is the number of striped copies of the backups you wish to create.    This value is overwritten if you specify multiple Backup Directories.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "CompressBackup",
                           "If this switch is enabled, the function will try to perform a compressed backup if supported by the version and edition of SQL Server. Otherwise, this function will use the server(s) default setting \r\nfor compression.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Checksum",
                           "If this switch is enabled, the backup checksum will be calculated.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Verify",
                           "If this switch is enabled, the backup will be verified by running a RESTORE VERIFYONLY against the SqlInstance",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "MaxTransferSize",
                           "Sets the size of the unit of transfer. Values must be a multiple of 64kb.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "BlockSize",
                           "Specifies the block size to use. Must be one of 0.5KB, 1KB, 2KB, 4KB, 8KB, 16KB, 32KB or 64KB. This can be specified in bytes.\r\nRefer to https://msdn.microsoft.com/en-us/library/ms178615.aspx for more detail",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "BufferCount",
                           "Number of I/O buffers to use to perform the operation.\r\nRefer to https://msdn.microsoft.com/en-us/library/ms178615.aspx for more detail",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "AzureBaseUrl",
                           "The URL to the base container of an Azure Storage account to write backups to.\nIf specified, the only other parameters than can be used are \"NoCopyOnly\", \"Type\", \"CompressBackup\", \"Checksum\", \"Verify\", \"AzureCredential\", \"CreateFolder\".",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AzureCredential",
                           "The name of the credential on the SQL instance that can write to the AzureBaseUrl, only needed if using Storage access keys\r\nIf using SAS credentials, the command will look for a credential with a name matching the AzureBaseUrl",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "NoRecovery",
                           "This is passed in to perform a tail log backup if needed",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "BuildPath",
                           "By default this command will not attempt to create missing paths, this switch will change the behaviour so that it will",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WithFormat",
                           "Formats the media as the first step of the backup operation. NOTE: This will set Initialize and SkipTapeHeader to $true.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Initialize",
                           "Initializes the media as part of the backup operation.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "SkipTapeHeader",
                           "Initializes the media as part of the backup operation.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "TimeStampFormat",
                           "By default the command timestamps backups using the format yyyyMMddHHmm. Using this parameter this can be overridden. The timestamp format should be defined using the Get-Date formats, illegal \r\nformats will cause an error to be thrown",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "IgnoreFileChecks",
                           "This switch stops the function from checking for the validity of paths. This can be useful if SQL Server only has read access to the backup area.\r\nNote, that as we cannot check the path you may well end up with errors.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "OutputScriptOnly",
                           "Switch causes only the T-SQL script for the backup to be generated. Will not create any paths if they do not exist",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Stuart Moore (@napalmgram), stuart-moore.com",
        "Synopsis":  "Backup one or more SQL Sever databases from a single SQL Server SqlInstance.",
        "Name":  "Backup-DbaDatabase",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eBackup-DbaDatabase -SqlInstance Server1 -Database HR, Finance\nThis will perform a full database backup on the databases HR and Finance on SQL Server Instance Server1 to Server1 default backup directory.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eBackup-DbaDatabase -SqlInstance sql2016 -BackupDirectory C:\\temp -Database AdventureWorks2014 -Type Full\nBacks up AdventureWorks2014 to sql2016 C:\\temp folder.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eBackup-DbaDatabase -SqlInstance sql2016 -AzureBaseUrl https://dbatoolsaz.blob.core.windows.net/azbackups/ -AzureCredential dbatoolscred -Type Full -CreateFolder\nPerforms a full backup of all databases on the sql2016 instance to their own containers under the https://dbatoolsaz.blob.core.windows.net/azbackups/ container on Azure blog storage using the sql \r\ncredential \"dbatoolscred\" registered on the sql2016 instance.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eBackup-DbaDatabase -SqlInstance sql2016 -AzureBaseUrl https://dbatoolsaz.blob.core.windows.net/azbackups/  -Type Full\nPerforms a full backup of all databases on the sql2016 instance to the https://dbatoolsaz.blob.core.windows.net/azbackups/ container on Azure blog storage using the Shared Access Signature sql \r\ncredential \"https://dbatoolsaz.blob.core.windows.net/azbackups\" registered on the sql2016 instance.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eBackup-Dbadatabase -SqlInstance Server1\\Prod -Database db1 -BackupDirectory \\\\filestore\\backups\\servername\\instancename\\dbname\\backuptype -Type Full -ReplaceInName\nPerforms a full backup of db1 into the folder \\\\filestore\\backups\\server1\\prod\\db1\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eBackup-Dbadatabase -SqlInstance Server1\\Prod -BackupDirectory \\\\filestore\\backups\\servername\\instancename\\dbname\\backuptype -BackupFileName dbname-backuptype-timestamp.trn -Type Log \r\n-ReplaceInName\nPerforms a log backup for every database. For the database db1 this would results in backup files in \\\\filestore\\backups\\server1\\prod\\db1\\Log\\db1-log-31102018.trn\n-------------------------- EXAMPLE 7 --------------------------\nPS C:\\\u003eBackup-DbaDatabase -SqlInstance Sql2017 -Database master -BackupFileName NUL\nPerforms a backup of master, but sends the output to the NUL device (ie; throws it away)",
        "Syntax":  "Backup-DbaDatabase [-SqlCredential \u003cPSCredential\u003e] [-Database \u003cObject[]\u003e] [-ExcludeDatabase \u003cObject[]\u003e] [-BackupDirectory \u003cString[]\u003e] [-BackupFileName \u003cString\u003e] [-ReplaceInName] [-CopyOnly] [-Type \u003cString\u003e] [-CreateFolder] [-FileCount \u003cInt32\u003e] [-CompressBackup] [-Checksum] [-Verify] [-MaxTransferSize \u003cInt32\u003e] [-BlockSize \u003cInt32\u003e] [-BufferCount \u003cInt32\u003e] [-AzureBaseUrl \u003cString\u003e] [-AzureCredential \u003cString\u003e] [-NoRecovery] [-BuildPath] [-WithFormat] [-Initialize] [-SkipTapeHeader] [-TimeStampFormat \u003cString\u003e] [-IgnoreFileChecks] [-OutputScriptOnly] [-EnableException] [-WhatIf] [-Confirm] \r\n[\u003cCommonParameters\u003e]\nBackup-DbaDatabase -SqlInstance \u003cDbaInstanceParameter\u003e [-SqlCredential \u003cPSCredential\u003e] [-Database \u003cObject[]\u003e] [-ExcludeDatabase \u003cObject[]\u003e] [-BackupDirectory \u003cString[]\u003e] [-BackupFileName \u003cString\u003e] [-ReplaceInName] [-CopyOnly] [-Type \u003cString\u003e] [-CreateFolder] [-FileCount \u003cInt32\u003e] [-CompressBackup] [-Checksum] [-Verify] [-MaxTransferSize \u003cInt32\u003e] [-BlockSize \u003cInt32\u003e] [-BufferCount \u003cInt32\u003e] [-AzureBaseUrl \u003cString\u003e] [-AzureCredential \u003cString\u003e] [-NoRecovery] [-BuildPath] [-WithFormat] [-Initialize] [-SkipTapeHeader] [-TimeStampFormat \u003cString\u003e] [-IgnoreFileChecks] [-OutputScriptOnly] \r\n[-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nBackup-DbaDatabase [-SqlCredential \u003cPSCredential\u003e] [-Database \u003cObject[]\u003e] [-ExcludeDatabase \u003cObject[]\u003e] [-BackupDirectory \u003cString[]\u003e] [-BackupFileName \u003cString\u003e] [-ReplaceInName] [-CopyOnly] [-Type \u003cString\u003e] -InputObject \u003cObject[]\u003e [-CreateFolder] [-FileCount \u003cInt32\u003e] [-CompressBackup] [-Checksum] [-Verify] [-MaxTransferSize \u003cInt32\u003e] [-BlockSize \u003cInt32\u003e] [-BufferCount \u003cInt32\u003e] [-AzureBaseUrl \u003cString\u003e] [-AzureCredential \u003cString\u003e] [-NoRecovery] [-BuildPath] [-WithFormat] [-Initialize] [-SkipTapeHeader] [-TimeStampFormat \u003cString\u003e] [-IgnoreFileChecks] [-OutputScriptOnly] [-EnableException] \r\n[-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Backup-DbaDbCertificate",
        "Description":  "Exports database certificates from SQL Server using SMO and outputs the .cer and .pvk files.",
        "Tags":  [
                     "Migration",
                     "Certificate"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Certificate",
                           "Exports certificate that matches the name(s).",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Exports the encryptor for specific database(s).",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "Database(s) to skip when exporting encryptors.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EncryptionPassword",
                           "A string value that specifies the system path to encrypt the private key.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "DecryptionPassword",
                           "A string value that specifies the system path to decrypt the private key.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Path",
                           "The path to output the files to. The path is relative to the SQL Server itself. If no path is specified, the default data directory will be used.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Suffix",
                           "The suffix of the filename of the exported certificate.",
                           "",
                           false,
                           "false",
                           "\"$(Get-Date -format \u0027yyyyMMddHHmmssms\u0027)\""
                       ],
                       [
                           "InputObject",
                           "Enables piping from Get-DbaDbCertificate",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Backup-DbaDatabaseCertificate",
        "Author":  "Jess Pomfret (@jpomfret)",
        "Synopsis":  "Exports database certificates from SQL Server using SMO.",
        "Name":  "Backup-DbaDbCertificate",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eBackup-DbaDbCertificate -SqlInstance Server1\nExports all the certificates on the specified SQL Server to the default data path for the instance.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e$cred = Get-Credential sqladmin\nPS C:\\\u003e Backup-DbaDbCertificate -SqlInstance Server1 -SqlCredential $cred\nConnects using sqladmin credential and exports all the certificates on the specified SQL Server to the default data path for the instance.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eBackup-DbaDbCertificate -SqlInstance Server1 -Certificate Certificate1\nExports only the certificate named Certificate1 on the specified SQL Server to the default data path for the instance.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eBackup-DbaDbCertificate -SqlInstance Server1 -Database AdventureWorks\nExports only the certificates for AdventureWorks on the specified SQL Server to the default data path for the instance.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eBackup-DbaDbCertificate -SqlInstance Server1 -ExcludeDatabase AdventureWorks\nExports all certificates except those for AdventureWorks on the specified SQL Server to the default data path for the instance.\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eBackup-DbaDbCertificate -SqlInstance Server1 -Path \\\\Server1\\Certificates -EncryptionPassword (ConvertTo-SecureString -force -AsPlainText GoodPass1234!!)\nExports all the certificates and private keys on the specified SQL Server.\n-------------------------- EXAMPLE 7 --------------------------\nPS C:\\\u003e$EncryptionPassword = ConvertTo-SecureString -AsPlainText \"GoodPass1234!!\" -force\nPS C:\\\u003e $DecryptionPassword = ConvertTo-SecureString -AsPlainText \"Password4567!!\" -force\r\nPS C:\\\u003e Backup-DbaDbCertificate -SqlInstance Server1 -EncryptionPassword $EncryptionPassword -DecryptionPassword $DecryptionPassword\nExports all the certificates on the specified SQL Server using the supplied DecryptionPassword, since an EncryptionPassword is specified private keys are also exported.\n-------------------------- EXAMPLE 8 --------------------------\nPS C:\\\u003eBackup-DbaDbCertificate -SqlInstance Server1 -Path \\\\Server1\\Certificates\nExports all certificates on the specified SQL Server to the specified path.\n-------------------------- EXAMPLE 9 --------------------------\nPS C:\\\u003eBackup-DbaDbCertificate -SqlInstance Server1 -Suffix DbaTools\nExports all certificates on the specified SQL Server to the specified path, appends DbaTools to the end of the filenames.\n-------------------------- EXAMPLE 10 --------------------------\nPS C:\\\u003eGet-DbaDbCertificate -SqlInstance sql2016 | Backup-DbaDbCertificate\nExports all certificates found on sql2016 to the default data directory.",
        "Syntax":  "Backup-DbaDbCertificate [-SqlCredential \u003cPSCredential\u003e] [-EncryptionPassword \u003cSecureString\u003e] [-DecryptionPassword \u003cSecureString\u003e] [-Path \u003cFileInfo\u003e] [-Suffix \u003cString\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nBackup-DbaDbCertificate -SqlInstance \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Certificate \u003cObject[]\u003e] [-Database \u003cObject[]\u003e] [-ExcludeDatabase \u003cObject[]\u003e] [-EncryptionPassword \u003cSecureString\u003e] [-DecryptionPassword \u003cSecureString\u003e] [-Path \u003cFileInfo\u003e] [-Suffix \u003cString\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nBackup-DbaDbCertificate [-SqlCredential \u003cPSCredential\u003e] [-EncryptionPassword \u003cSecureString\u003e] [-DecryptionPassword \u003cSecureString\u003e] [-Path \u003cFileInfo\u003e] [-Suffix \u003cString\u003e] [-InputObject \u003cCertificate[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Backup-DbaDbMasterKey",
        "Description":  "Backs up specified database master key.",
        "Tags":  [
                     "Certificate",
                     "Database"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to login to SQL Server using alternative credentials.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Credential",
                           "Pass a credential object for the password",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Backup master key from specific database(s).",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SecurePassword",
                           "The password to encrypt the exported key. This must be a SecureString.",
                           "Password",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Path",
                           "The directory to export the key. If no path is specified, the default backup directory for the instance will be used.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Database object piped in from Get-DbaDatabase",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Backup-DbaDatabaseMasterKey",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Backs up specified database master key.",
        "Name":  "Backup-DbaDbMasterKey",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eBackup-DbaDbMasterKey -SqlInstance server1\\sql2016\n```\r\nComputerName : SERVER1\r\nInstanceName : SQL2016\r\nSqlInstance  : SERVER1\\SQL2016\r\nDatabase     : master\r\nFilename     : E:\\MSSQL13.SQL2016\\MSSQL\\Backup\\server1$sql2016-master-20170614162311.key\r\nStatus       : Success\r\n```\nPrompts for export password, then logs into server1\\sql2016 with Windows credentials then backs up all database keys to the default backup directory.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eBackup-DbaDbMasterKey -SqlInstance Server1 -Database db1 -Path \\\\nas\\sqlbackups\\keys\nLogs into sql2016 with Windows credentials then backs up db1\u0027s keys to the \\\\nas\\sqlbackups\\keys directory.",
        "Syntax":  "Backup-DbaDbMasterKey [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Credential] \u003cPSCredential\u003e] [[-Database] \u003cString[]\u003e] [[-ExcludeDatabase] \u003cString[]\u003e] [[-SecurePassword] \u003cSecureString\u003e] [[-Path] \u003cString\u003e] [[-InputObject] \u003cDatabase[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Clear-DbaConnectionPool",
        "Description":  "This command resets (or empties) the connection pool.\n\nIf there are connections in use at the time of the call, they are marked appropriately and will be discarded (instead of being returned to the pool) when Close() is called on them.\n\nRef: https://msdn.microsoft.com/en-us/library/system.data.sqlclient.sqlconnection.clearallpools(v=vs.110).aspx",
        "Tags":  "Connection",
        "Params":  [
                       [
                           "ComputerName",
                           "Target computer(s). If no computer name is specified, the local computer is targeted.",
                           "cn,host,Server",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Alternate credential object to use for accessing the target computer(s).",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Clear-DbaSqlConnectionPool",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Resets (or empties) the connection pool.",
        "Name":  "Clear-DbaConnectionPool",
        "Links":  "https://dbatools.io/Clear-DbaConnectionPool",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eClear-DbaConnectionPool\nClears all local connection pools.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eClear-DbaConnectionPool -ComputerName workstation27\nClears all connection pools on workstation27.",
        "Syntax":  "Clear-DbaConnectionPool [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Clear-DbaLatchStatistics",
        "Description":  "Reset the aggregated statistics - basically just executes DBCC SQLPERF (N\u0027sys.dm_os_latch_stats\u0027, CLEAR)",
        "Tags":  [
                     "LatchStatistic",
                     "Waits"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "Allows you to specify a comma separated list of servers to query.",
                           "ServerInstance,SqlServer,SqlServers",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Patrick Flynn (@sqllensman)",
        "Synopsis":  "Clears Latch Statistics",
        "Name":  "Clear-DbaLatchStatistics",
        "Links":  "https://dbatools.io/Clear-DbaLatchStatistics",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eClear-DbaLatchStatistics -SqlInstance sql2008, sqlserver2012\nAfter confirmation, clears latch statistics on servers sql2008 and sqlserver2012\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eClear-DbaLatchStatistics -SqlInstance sql2008, sqlserver2012 -Confirm:$false\nClears latch statistics on servers sql2008 and sqlserver2012, without prompting\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003e\u0027sql2008\u0027,\u0027sqlserver2012\u0027 | Clear-DbaLatchStatistics\nAfter confirmation, clears latch statistics on servers sql2008 and sqlserver2012\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003e$cred = Get-Credential sqladmin\nPS C:\\\u003e Clear-DbaLatchStatistics -SqlInstance sql2008 -SqlCredential $cred\nConnects using sqladmin credential and clears latch statistics on servers sql2008 and sqlserver2012",
        "Syntax":  "Clear-DbaLatchStatistics [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Clear-DbaPlanCache",
        "Description":  "Checks ad-hoc and prepared plan cache for each database, if over 100 MBs removes from the cache.\n\nThis command automates that process.\n\nReferences: https://www.sqlskills.com/blogs/kimberly/plan-cache-adhoc-workloads-and-clearing-the-single-use-plan-cache-bloat/",
        "Tags":  "Memory",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer,SqlServers",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Threshold",
                           "Memory used threshold.",
                           "",
                           false,
                           "false",
                           "100"
                       ],
                       [
                           "InputObject",
                           "Enables results to be piped in from Get-DbaPlanCache.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Tracy Boggiano, databasesuperhero.com",
        "Synopsis":  "Removes ad-hoc and prepared plan caches is single use plans are over defined threshold.",
        "Name":  "Clear-DbaPlanCache",
        "Links":  "https://dbatools.io/Clear-DbaPlanCache",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eClear-DbaPlanCache -SqlInstance sql2017 -Threshold 200\nLogs into the SQL Server instance \"sql2017\" and removes plan caches if over 200 MB.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eClear-DbaPlanCache -SqlInstance sql2017 -SqlCredential sqladmin\nLogs into the SQL instance using the SQL Login \u0027sqladmin\u0027 and then Windows instance as \u0027ad\\sqldba\u0027\r\nand removes if Threshold over 100 MB.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eFind-DbaInstance -ComputerName localhost | Get-DbaPlanCache | Clear-DbaPlanCache -Threshold 200\nScans localhost for instances using the browser service, traverses all instances and gets the plan cache for each, clears them out if they are above 200 MB.",
        "Syntax":  "Clear-DbaPlanCache [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Threshold] \u003cInt32\u003e] [[-InputObject] \u003cObject[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Clear-DbaWaitStatistics",
        "Description":  "Reset the aggregated statistics - basically just executes DBCC SQLPERF (N\u0027sys.dm_os_wait_stats\u0027, CLEAR)",
        "Tags":  [
                     "WaitStatistic",
                     "Waits"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer,SqlServers",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl)",
        "Synopsis":  "Clears wait statistics",
        "Name":  "Clear-DbaWaitStatistics",
        "Links":  "https://dbatools.io/Clear-DbaWaitStatistics",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eClear-DbaWaitStatistics -SqlInstance sql2008, sqlserver2012\nAfter confirmation, clears wait stats on servers sql2008 and sqlserver2012\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eClear-DbaWaitStatistics -SqlInstance sql2008, sqlserver2012 -Confirm:$false\nClears wait stats on servers sql2008 and sqlserver2012, without prompting",
        "Syntax":  "Clear-DbaWaitStatistics [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Connect-DbaInstance",
        "Description":  "This command is robust because it initializes properties that do not cause enumeration by default. It also supports both Windows and SQL Server authentication methods, and detects which to use based upon the provided credentials.\n\nBy default, this command also sets the connection\u0027s ApplicationName property  to \"dbatools PowerShell module - dbatools.io - custom connection\". If you\u0027re doing anything that requires profiling, you can look for this client name.\n\nAlternatively, you can pass in whichever client name you\u0027d like using the -ClientName parameter. There are a ton of other parameters for you to explore as well.\n\nSee https://msdn.microsoft.com/en-us/library/system.data.sqlclient.sqlconnection.connectionstring.aspx\nand https://msdn.microsoft.com/en-us/library/system.data.sqlclient.sqlconnectionstringbuilder.aspx,\nand https://msdn.microsoft.com/en-us/library/system.data.sqlclient.sqlconnection.aspx\n\nTo execute SQL commands, you can use $server.ConnectionContext.ExecuteReader($sql) or $server.Databases[\u0027master\u0027].ExecuteNonQuery($sql)",
        "Tags":  [
                     "Connect",
                     "Connection"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Credential object used to connect to the SQL Server Instance as a different user. This can be a Windows or SQL Server account. Windows users are determined by the existence of a backslash, so if you \r\nare intending to use an alternative Windows connection instead of a SQL login, ensure it contains a backslash.",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process. This list is auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AccessToken",
                           "Gets or sets the access token for the connection.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ApplicationIntent",
                           "Declares the application workload type when connecting to a server.\nValid values are \"ReadOnly\" and \"ReadWrite\".",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "BatchSeparator",
                           "A string to separate groups of SQL statements being executed. By default, this is \"GO\".",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ClientName",
                           "By default, this command sets the client\u0027s ApplicationName property to \"dbatools PowerShell module - dbatools.io - custom connection\" if you\u0027re doing anything that requires profiling, you can look \r\nfor this client name. Using -ClientName allows you to set your own custom client application name.",
                           "",
                           false,
                           "false",
                           "dbatools PowerShell module - dbatools.io - custom connection"
                       ],
                       [
                           "ConnectTimeout",
                           "The length of time (in seconds) to wait for a connection to the server before terminating the attempt and generating an error.\nValid values are integers between 0 and 2147483647.\nWhen opening a connection to a Azure SQL Database, set the connection timeout to 30 seconds.",
                           "",
                           false,
                           "false",
                           "([Sqlcollaborative.Dbatools.Connection.ConnectionHost]::SqlConnectionTimeout)"
                       ],
                       [
                           "EncryptConnection",
                           "If this switch is enabled, SQL Server uses SSL encryption for all data sent between the client and server if the server has a certificate installed.\nFor more information, see Connection String Syntax. https://docs.microsoft.com/en-us/dotnet/framework/data/adonet/connection-string-syntax\nBeginning in .NET Framework 4.5, when TrustServerCertificate is false and Encrypt is true, the server name (or IP address) in a SQL Server SSL certificate must exactly match the server name (or IP \r\naddress) specified in the connection string. Otherwise, the connection attempt will fail. For information about support for certificates whose subject starts with a wildcard character (*), see \r\nAccepted wildcards used by server certificates for server authentication. https://support.microsoft.com/en-us/help/258858/accepted-wildcards-used-by-server-certificates-for-server-authenticati",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "FailoverPartner",
                           "The name of the failover partner server where database mirroring is configured.\nIf the value of this key is \"\" (an empty string), then Initial Catalog must be present in the connection string, and its value must not be \"\".\nThe server name can be 128 characters or less.\nIf you specify a failover partner but the failover partner server is not configured for database mirroring and the primary server (specified with the Server keyword) is not available, then the \r\nconnection will fail.\nIf you specify a failover partner and the primary server is not configured for database mirroring, the connection to the primary server (specified with the Server keyword) will succeed if the primary \r\nserver is available.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "LockTimeout",
                           "Sets the time in seconds required for the connection to time out when the current transaction is locked.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "MaxPoolSize",
                           "Sets the maximum number of connections allowed in the connection pool for this specific connection string.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "MinPoolSize",
                           "Sets the minimum number of connections allowed in the connection pool for this specific connection string.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "MultipleActiveResultSets",
                           "If this switch is enabled, an application can maintain multiple active result sets (MARS).\nIf this switch is not enabled, an application must process or cancel all result sets from one batch before it can execute any other batch on that connection.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "MultiSubnetFailover",
                           "If this switch is enabled, and your application is connecting to an AlwaysOn availability group (AG) on different subnets, detection of and connection to the currently active server will be faster. \r\nFor more information about SqlClient support for Always On Availability Groups, see \r\nhttps://docs.microsoft.com/en-us/dotnet/framework/data/adonet/sql/sqlclient-support-for-high-availability-disaster-recovery",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "NetworkProtocol",
                           "Explicitly sets the network protocol used to connect to the server.\nValid values are \"TcpIp\",\"NamedPipes\",\"Multiprotocol\",\"AppleTalk\",\"BanyanVines\",\"Via\",\"SharedMemory\" and \"NWLinkIpxSpx\"",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "NonPooledConnection",
                           "If this switch is enabled, a non-pooled connection will be requested.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "PacketSize",
                           "Sets the size in bytes of the network packets used to communicate with an instance of SQL Server. Must match at server.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "PooledConnectionLifetime",
                           "When a connection is returned to the pool, its creation time is compared with the current time and the connection is destroyed if that time span (in seconds) exceeds the value specified by Connection \r\nLifetime. This is useful in clustered configurations to force load balancing between a running server and a server just brought online.\nA value of zero (0) causes pooled connections to have the maximum connection timeout.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "SqlExecutionModes",
                           "The SqlExecutionModes enumeration contains values that are used to specify whether the commands sent to the referenced connection to the server are executed immediately or saved in a buffer.\nValid values include \"CaptureSql\", \"ExecuteAndCaptureSql\" and \"ExecuteSql\".",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "StatementTimeout",
                           "Sets the number of seconds a statement is given to run before failing with a timeout error.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "TrustServerCertificate",
                           "When this switch is enabled, the channel will be encrypted while bypassing walking the certificate chain to validate trust.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WorkstationId",
                           "Sets the name of the workstation connecting to SQL Server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AppendConnectionString",
                           "Appends to the current connection string. Note that you cannot pass authentication information using this method. Use -SqlInstance and optionally -SqlCredential to set authentication information.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlConnectionOnly",
                           "Instead of returning a rich SMO server object, this command will only return a SqlConnection object when setting this switch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "DisableException",
                           "By default in most of our commands, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\nThis command, however, gifts you  with \"sea of red\" exceptions, by default, because it is useful for advanced scripting.\nUsing this switch turns our \"nice by default\" feature on which makes errors into pretty warnings.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Connect-DbaServer,Get-DbaInstance",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Creates a robust SMO SQL Server object.",
        "Name":  "Connect-DbaInstance",
        "Links":  "https://dbatools.io/Connect-DbaInstance",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eConnect-DbaInstance -SqlInstance sql2014\nCreates an SMO Server object that connects using Windows Authentication\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e$wincred = Get-Credential ad\\sqladmin\nPS C:\\\u003e Connect-DbaInstance -SqlInstance sql2014 -SqlCredential $wincred\nCreates an SMO Server object that connects using alternative Windows credentials\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003e$sqlcred = Get-Credential sqladmin\nPS C:\\\u003e $server = Connect-DbaInstance -SqlInstance sql2014 -SqlCredential $sqlcred\nLogin to sql2014 as SQL login sqladmin.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003e$server = Connect-DbaInstance -SqlInstance sql2014 -ClientName \"my connection\"\nCreates an SMO Server object that connects using Windows Authentication and uses the client name \"my connection\". So when you open up profiler or use extended events, you can search for \"my \r\nconnection\".\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003e$server = Connect-DbaInstance -SqlInstance sql2014 -AppendConnectionString \"Packet Size=4096;AttachDbFilename=C:\\MyFolder\\MyDataFile.mdf;User Instance=true;\"\nCreates an SMO Server object that connects to sql2014 using Windows Authentication, then it sets the packet size (this can also be done via -PacketSize) and other connection attributes.\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003e$server = Connect-DbaInstance -SqlInstance sql2014 -NetworkProtocol TcpIp -MultiSubnetFailover\nCreates an SMO Server object that connects using Windows Authentication that uses TCP/IP and has MultiSubnetFailover enabled.\n-------------------------- EXAMPLE 7 --------------------------\nPS C:\\\u003e$server = Connect-DbaInstance sql2016 -ApplicationIntent ReadOnly\nConnects with ReadOnly ApplicationIntent.",
        "Syntax":  "Connect-DbaInstance [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-AccessToken] \u003cString\u003e] [[-ApplicationIntent] \u003cString\u003e] [[-BatchSeparator] \u003cString\u003e] [[-ClientName] \u003cString\u003e] [[-ConnectTimeout] \u003cInt32\u003e] [-EncryptConnection] [[-FailoverPartner] \u003cString\u003e] [[-LockTimeout] \u003cInt32\u003e] [[-MaxPoolSize] \u003cInt32\u003e] [[-MinPoolSize] \u003cInt32\u003e] [-MultipleActiveResultSets] [-MultiSubnetFailover] [[-NetworkProtocol] \u003cString\u003e] [-NonPooledConnection] [[-PacketSize] \u003cInt32\u003e] [[-PooledConnectionLifetime] \u003cInt32\u003e] [[-SqlExecutionModes] \u003cString\u003e] \r\n[[-StatementTimeout] \u003cInt32\u003e] [-TrustServerCertificate] [[-WorkstationId] \u003cString\u003e] [[-AppendConnectionString] \u003cString\u003e] [-SqlConnectionOnly] [-DisableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "ConvertTo-DbaDataTable",
        "Description":  "Creates a DataTable based on an object\u0027s properties. This allows you to easily write to SQL Server tables.\n\nThanks to Chad Miller, this is based on his script. https://gallery.technet.microsoft.com/scriptcenter/4208a159-a52e-4b99-83d4-8048468d29dd\n\nIf the attempt to convert to data table fails, try the -Raw parameter for less accurate datatype detection.",
        "Tags":  [
                     "DataTable",
                     "Table",
                     "Data"
                 ],
        "Params":  [
                       [
                           "InputObject",
                           "The object to transform into a DataTable.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "TimeSpanType",
                           "Specifies the type to convert TimeSpan objects into. Default is \u0027TotalMilliseconds\u0027. Valid options are: \u0027Ticks\u0027, \u0027TotalDays\u0027, \u0027TotalHours\u0027, \u0027TotalMinutes\u0027, \u0027TotalSeconds\u0027, \u0027TotalMilliseconds\u0027, and \r\n\u0027String\u0027.",
                           "",
                           false,
                           "false",
                           "TotalMilliseconds"
                       ],
                       [
                           "SizeType",
                           "Specifies the type to convert DbaSize objects to. Default is \u0027Int64\u0027. Valid options are \u0027Int32\u0027, \u0027Int64\u0027, and \u0027String\u0027.",
                           "",
                           false,
                           "false",
                           "Int64"
                       ],
                       [
                           "IgnoreNull",
                           "If this switch is enabled, objects with null values will be ignored (empty rows will be added by default).",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Raw",
                           "If this switch is enabled, the DataTable will be created with strings. No attempt will be made to parse/determine data types.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Out-DbaDataTable",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Creates a DataTable for an object.",
        "Name":  "ConvertTo-DbaDataTable",
        "Links":  "https://dbatools.io/ConvertTo-DbaDataTable",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-Service | ConvertTo-DbaDataTable\nCreates a DataTable from the output of Get-Service.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eConvertTo-DbaDataTable -InputObject $csv.cheesetypes\nCreates a DataTable from the CSV object $csv.cheesetypes.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003e$dblist | ConvertTo-DbaDataTable\nCreates a DataTable from the $dblist object passed in via pipeline.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-Process | ConvertTo-DbaDataTable -TimeSpanType TotalSeconds\nCreates a DataTable with the running processes and converts any TimeSpan property to TotalSeconds.",
        "Syntax":  "ConvertTo-DbaDataTable [-InputObject] \u003cPSObject[]\u003e [[-TimeSpanType] \u003cString\u003e] [-SizeType \u003cString\u003e] [-IgnoreNull] [-Raw] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "ConvertTo-DbaTimeline",
        "Description":  "This function accepts input as pipeline from the following dbatools functions:\nGet-DbaAgentJobHistory\nGet-DbaBackupHistory\n(more to come...)\nAnd generates Bootstrap based, HTML file with Google Chart Timeline",
        "Tags":  "Chart",
        "Params":  [
                       [
                           "InputObject",
                           "Pipe input, must an output from the above functions.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Marcin Gminski (@marcingminski)",
        "Synopsis":  "Converts InputObject to a html timeline using Google Chart",
        "Name":  "ConvertTo-DbaTimeline",
        "Links":  "https://dbatools.io/ConvertTo-DbaTimeline",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaAgentJobHistory -SqlInstance sql-1 -StartDate \u00272018-08-13 00:00\u0027 -EndDate \u00272018-08-13 23:59\u0027 -ExcludeJobSteps | ConvertTo-DbaTimeline | Out-File C:\\temp\\DbaAgentJobHistory.html \r\n-Encoding ASCII\nCreates an output file containing a pretty timeline for all of the agent job history results for sql-1 the whole day of 2018-08-13\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaCmsRegServer -SqlInstance sqlcm | Get-DbaBackupHistory -Since \u00272018-08-13 00:00\u0027 | ConvertTo-DbaTimeline | Out-File C:\\temp\\DbaBackupHistory.html -Encoding ASCII\nCreates an output file containing a pretty timeline for the agent job history since 2018-08-13 for all of the registered servers on sqlcm\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003e$messageParameters = @{\n\u003e\u003e Subject = \"Backup history for sql2017 and sql2016\"\r\n\u003e\u003e Body = Get-DbaBackupHistory -SqlInstance sql2017, sql2016 -Since \u00272018-08-13 00:00\u0027 | ConvertTo-DbaTimeline\r\n\u003e\u003e From = \"[email protected]\"\r\n\u003e\u003e To = \"[email protected]\"\r\n\u003e\u003e SmtpServer = \"smtp.ad.local\"\r\n\u003e\u003e }\r\n\u003e\u003e\r\nPS C:\\\u003e Send-MailMessage @messageParameters -BodyAsHtml\nSends an email to [email protected] with the results of Get-DbaBackupHistory. Note that viewing these reports may not be supported in all email clients.",
        "Syntax":  "ConvertTo-DbaTimeline [-InputObject] \u003cObject[]\u003e [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "ConvertTo-DbaXESession",
        "Description":  "Uses a slightly modified version of sp_SQLskills_ConvertTraceToExtendedEvents.sql to convert Traces to Extended Events.\n\nT-SQL code by: Jonathan M. Kehayias, SQLskills.com. T-SQL can be found in this module directory and at\nhttps://www.sqlskills.com/blogs/jonathan/converting-sql-trace-to-extended-events-in-sql-server-2012/",
        "Tags":  [
                     "Trace",
                     "ExtendedEvent"
                 ],
        "Params":  [
                       [
                           "InputObject",
                           "Specifies a Trace object output by Get-DbaTrace.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Name",
                           "The name of the Trace to convert. If the name exists, characters will be appended to it.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "OutputScriptOnly",
                           "Outputs the T-SQL script to create the XE session and does not execute it.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Uses a slightly modified version of sp_SQLskills_ConvertTraceToExtendedEvents.sql to convert Traces to Extended Events.",
        "Name":  "ConvertTo-DbaXESession",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaTrace -SqlInstance sql2017, sql2012 | Where Id -eq 2 | ConvertTo-DbaXESession -Name \u0027Test\u0027\nConverts Trace with ID 2 to a Session named Test on SQL Server instances named sql2017 and sql2012 and creates the Session on each respective server.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaTrace -SqlInstance sql2014 | Out-GridView -PassThru | ConvertTo-DbaXESession -Name \u0027Test\u0027 | Start-DbaXESession\nConverts selected traces on sql2014 to sessions, creates the session, and starts it.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaTrace -SqlInstance sql2014 | Where Id -eq 1 | ConvertTo-DbaXESession -Name \u0027Test\u0027 -OutputScriptOnly\nConverts trace ID 1 on sql2014 to an Extended Event and outputs the resulting T-SQL.",
        "Syntax":  "ConvertTo-DbaXESession [-InputObject] \u003cObject[]\u003e [-Name] \u003cString\u003e [-OutputScriptOnly] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Copy-DbaAgentAlert",
        "Description":  "By default, all alerts are copied. The -Alert parameter is auto-populated for command-line completion and can be used to copy only specific alerts.\n\nIf the alert already exists on the destination, it will be skipped unless -Force is used.",
        "Tags":  [
                     "Migration",
                     "Agent"
                 ],
        "Params":  [
                       [
                           "Source",
                           "Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SourceSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Destination",
                           "Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "DestinationSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Alert",
                           "The alert(s) to process. This list is auto-populated from the server. If unspecified, all alerts will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeAlert",
                           "The alert(s) to exclude. This list is auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "IncludeDefaults",
                           "Copy SQL Agent defaults such as FailSafeEmailAddress, ForwardingServer, and PagerSubjectTemplate.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Force",
                           "If this switch is enabled, the Alert will be dropped and recreated on Destination.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Copy-SqlAlert",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Copy-DbaAgentAlert migrates alerts from one SQL Server to another.",
        "Name":  "Copy-DbaAgentAlert",
        "Links":  "https://dbatools.io/Copy-DbaAgentAlert",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eCopy-DbaAgentAlert -Source sqlserver2014a -Destination sqlcluster\nCopies all alerts from sqlserver2014a to sqlcluster using Windows credentials. If alerts with the same name exist on sqlcluster, they will be skipped.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eCopy-DbaAgentAlert -Source sqlserver2014a -Destination sqlcluster -Alert PSAlert -SourceSqlCredential $cred -Force\nCopies a only the alert named PSAlert from sqlserver2014a to sqlcluster using SQL credentials for sqlserver2014a and Windows credentials for sqlcluster. If an alert with the same name exists on \r\nsqlcluster, it will be dropped and recreated because -Force was used.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eCopy-DbaAgentAlert -Source sqlserver2014a -Destination sqlcluster -WhatIf -Force\nShows what would happen if the command were executed using force.",
        "Syntax":  "Copy-DbaAgentAlert [-Source] \u003cDbaInstanceParameter\u003e [[-SourceSqlCredential] \u003cPSCredential\u003e] [-Destination] \u003cDbaInstanceParameter[]\u003e [[-DestinationSqlCredential] \u003cPSCredential\u003e] [[-Alert] \u003cObject[]\u003e] [[-ExcludeAlert] \u003cObject[]\u003e] [-IncludeDefaults] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Copy-DbaAgentJob",
        "Description":  "By default, all jobs are copied. The -Job parameter is auto-populated for command-line completion and can be used to copy only specific jobs.\n\nIf the job already exists on the destination, it will be skipped unless -Force is used.",
        "Tags":  [
                     "Migration",
                     "Agent",
                     "Job"
                 ],
        "Params":  [
                       [
                           "Source",
                           "Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SourceSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Destination",
                           "Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "DestinationSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Job",
                           "The job(s) to process. This list is auto-populated from the server. If unspecified, all jobs will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeJob",
                           "The job(s) to exclude. This list is auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "DisableOnSource",
                           "If this switch is enabled, the job will be disabled on the source server.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "DisableOnDestination",
                           "If this switch is enabled, the newly migrated job will be disabled on the destination server.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Force",
                           "If this switch is enabled, the Job will be dropped and recreated on Destination.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Copy-SqlJob",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Copy-DbaAgentJob migrates jobs from one SQL Server to another.",
        "Name":  "Copy-DbaAgentJob",
        "Links":  "https://dbatools.io/Copy-DbaAgentJob",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eCopy-DbaAgentJob -Source sqlserver2014a -Destination sqlcluster\nCopies all jobs from sqlserver2014a to sqlcluster, using Windows credentials. If jobs with the same name exist on sqlcluster, they will be skipped.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eCopy-DbaAgentJob -Source sqlserver2014a -Destination sqlcluster -Job PSJob -SourceSqlCredential $cred -Force\nCopies a single job, the PSJob job from sqlserver2014a to sqlcluster, using SQL credentials for sqlserver2014a and Windows credentials for sqlcluster. If a job with the same name exists on \r\nsqlcluster, it will be dropped and recreated because -Force was used.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eCopy-DbaAgentJob -Source sqlserver2014a -Destination sqlcluster -WhatIf -Force\nShows what would happen if the command were executed using force.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaAgentJob -SqlInstance sqlserver2014a | Where-Object Category -eq \"Report Server\" | ForEach-Object {Copy-DbaAgentJob -Source $_.SqlInstance -Job $_.Name -Destination sqlserver2014b}\nCopies all SSRS jobs (subscriptions) from AlwaysOn Primary SQL instance sqlserver2014a to AlwaysOn Secondary SQL instance sqlserver2014b",
        "Syntax":  "Copy-DbaAgentJob [-Source] \u003cDbaInstanceParameter\u003e [[-SourceSqlCredential] \u003cPSCredential\u003e] [-Destination] \u003cDbaInstanceParameter[]\u003e [[-DestinationSqlCredential] \u003cPSCredential\u003e] [[-Job] \u003cObject[]\u003e] [[-ExcludeJob] \u003cObject[]\u003e] [-DisableOnSource] [-DisableOnDestination] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Copy-DbaAgentJobCategory",
        "Description":  "By default, all SQL Agent categories for Jobs, Operators and Alerts are copied.\n\nThe -OperatorCategories parameter is auto-populated for command-line completion and can be used to copy only specific operator categories.\nThe -AgentCategories parameter is auto-populated for command-line completion and can be used to copy only specific agent categories.\nThe -JobCategories parameter is auto-populated for command-line completion and can be used to copy only specific job categories.\n\nIf the category already exists on the destination, it will be skipped unless -Force is used.",
        "Tags":  [
                     "Migration",
                     "Agent"
                 ],
        "Params":  [
                       [
                           "Source",
                           "Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SourceSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Destination",
                           "Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "DestinationSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "CategoryType",
                           "Specifies the Category Type to migrate. Valid options are \"Job\", \"Alert\" and \"Operator\". When CategoryType is specified, all categories from the selected type will be migrated. For granular \r\nmigrations, use the three parameters below.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "JobCategory",
                           "This parameter is auto-populated for command-line completion and can be used to copy only specific job categories.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AgentCategory",
                           "This parameter is auto-populated for command-line completion and can be used to copy only specific agent categories.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "OperatorCategory",
                           "This parameter is auto-populated for command-line completion and can be used to copy only specific operator categories.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Force",
                           "If this switch is enabled, the Category will be dropped and recreated on Destination.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Copy-DbaAgentCategory,Copy-SqlAgentCategory",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Copy-DbaAgentJobCategory migrates SQL Agent categories from one SQL Server to another. This is similar to sp_add_category.\n\nhttps://msdn.microsoft.com/en-us/library/ms181597.aspx",
        "Name":  "Copy-DbaAgentJobCategory",
        "Links":  "https://dbatools.io/Copy-DbaAgentJobCategory",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eCopy-DbaAgentJobCategory -Source sqlserver2014a -Destination sqlcluster\nCopies all operator categories from sqlserver2014a to sqlcluster using Windows authentication. If operator categories with the same name exist on sqlcluster, they will be skipped.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eCopy-DbaAgentJobCategory -Source sqlserver2014a -Destination sqlcluster -OperatorCategory PSOperator -SourceSqlCredential $cred -Force\nCopies a single operator category, the PSOperator operator category from sqlserver2014a to sqlcluster using SQL credentials to authenticate to sqlserver2014a and Windows credentials for sqlcluster. \r\nIf an operator category with the same name exists on sqlcluster, it will be dropped and recreated because -Force was used.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eCopy-DbaAgentJobCategory -Source sqlserver2014a -Destination sqlcluster -WhatIf -Force\nShows what would happen if the command were executed using force.",
        "Syntax":  "Copy-DbaAgentJobCategory -Source \u003cDbaInstanceParameter\u003e [-SourceSqlCredential \u003cPSCredential\u003e] -Destination \u003cDbaInstanceParameter[]\u003e [-DestinationSqlCredential \u003cPSCredential\u003e] [-JobCategory \u003cString[]\u003e] [-AgentCategory \u003cString[]\u003e] [-OperatorCategory \u003cString[]\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nCopy-DbaAgentJobCategory -Source \u003cDbaInstanceParameter\u003e [-SourceSqlCredential \u003cPSCredential\u003e] -Destination \u003cDbaInstanceParameter[]\u003e [-DestinationSqlCredential \u003cPSCredential\u003e] [-CategoryType \u003cString[]\u003e] [-JobCategory \u003cString[]\u003e] [-AgentCategory \u003cString[]\u003e] [-OperatorCategory \u003cString[]\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Copy-DbaAgentOperator",
        "Description":  "By default, all operators are copied. The -Operators parameter is auto-populated for command-line completion and can be used to copy only specific operators.\n\nIf the associated credentials for the operator do not exist on the destination, it will be skipped. If the operator already exists on the destination, it will be skipped unless -Force is used.",
        "Tags":  [
                     "Migration",
                     "Agent",
                     "Operator"
                 ],
        "Params":  [
                       [
                           "Source",
                           "Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SourceSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Destination",
                           "Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "DestinationSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Operator",
                           "The operator(s) to process. This list is auto-populated from the server. If unspecified, all operators will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeOperator",
                           "The operators(s) to exclude. This list is auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Force",
                           "If this switch is enabled, the Operator will be dropped and recreated on Destination.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Copy-SqlOperator",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Copy-DbaAgentOperator migrates operators from one SQL Server to another.",
        "Name":  "Copy-DbaAgentOperator",
        "Links":  "https://dbatools.io/Copy-DbaAgentOperator",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eCopy-DbaAgentOperator -Source sqlserver2014a -Destination sqlcluster\nCopies all operators from sqlserver2014a to sqlcluster using Windows credentials. If operators with the same name exist on sqlcluster, they will be skipped.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eCopy-DbaAgentOperator -Source sqlserver2014a -Destination sqlcluster -Operator PSOperator -SourceSqlCredential $cred -Force\nCopies only the PSOperator operator from sqlserver2014a to sqlcluster using SQL credentials for sqlserver2014a and Windows credentials for sqlcluster. If an operator with the same name exists on \r\nsqlcluster, it will be dropped and recreated because -Force was used.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eCopy-DbaAgentOperator -Source sqlserver2014a -Destination sqlcluster -WhatIf -Force\nShows what would happen if the command were executed using force.",
        "Syntax":  "Copy-DbaAgentOperator [-Source] \u003cDbaInstanceParameter\u003e [[-SourceSqlCredential] \u003cPSCredential\u003e] [-Destination] \u003cDbaInstanceParameter[]\u003e [[-DestinationSqlCredential] \u003cPSCredential\u003e] [[-Operator] \u003cObject[]\u003e] [[-ExcludeOperator] \u003cObject[]\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Copy-DbaAgentProxy",
        "Description":  "By default, all proxy accounts are copied. The -ProxyAccounts parameter is auto-populated for command-line completion and can be used to copy only specific proxy accounts.\n\nIf the associated credential for the account does not exist on the destination, it will be skipped. If the proxy account already exists on the destination, it will be skipped unless -Force is used.",
        "Tags":  [
                     "Migration",
                     "Agent"
                 ],
        "Params":  [
                       [
                           "Source",
                           "Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SourceSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Destination",
                           "Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "DestinationSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ProxyAccount",
                           "Only migrate specific proxy accounts",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeProxyAccount",
                           "Migrate all proxy accounts except the ones explicitly excluded",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Force",
                           "If this switch is enabled, the Operator will be dropped and recreated on Destination.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Copy-DbaAgentProxyAccount,Copy-SqlProxyAccount",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Copy-DbaAgentProxy migrates proxy accounts from one SQL Server to another.",
        "Name":  "Copy-DbaAgentProxy",
        "Links":  "https://dbatools.io/Copy-DbaAgentProxy",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eCopy-DbaAgentProxy -Source sqlserver2014a -Destination sqlcluster\nCopies all proxy accounts from sqlserver2014a to sqlcluster using Windows credentials. If proxy accounts with the same name exist on sqlcluster, they will be skipped.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eCopy-DbaAgentProxy -Source sqlserver2014a -Destination sqlcluster -ProxyAccount PSProxy -SourceSqlCredential $cred -Force\nCopies only the PSProxy proxy account from sqlserver2014a to sqlcluster using SQL credentials for sqlserver2014a and Windows credentials for sqlcluster. If a proxy account with the same name exists \r\non sqlcluster, it will be dropped and recreated because -Force was used.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eCopy-DbaAgentProxy -Source sqlserver2014a -Destination sqlcluster -WhatIf -Force\nShows what would happen if the command were executed using force.",
        "Syntax":  "Copy-DbaAgentProxy [-Source] \u003cDbaInstanceParameter\u003e [[-SourceSqlCredential] \u003cPSCredential\u003e] [-Destination] \u003cDbaInstanceParameter[]\u003e [[-DestinationSqlCredential] \u003cPSCredential\u003e] [[-ProxyAccount] \u003cString[]\u003e] [[-ExcludeProxyAccount] \u003cString[]\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Copy-DbaAgentSchedule",
        "Description":  "All shared job schedules are copied.\n\nIf the associated credential for the account does not exist on the destination, it will be skipped. If the shared job schedule already exists on the destination, it will be skipped unless -Force is used.",
        "Tags":  [
                     "Migration",
                     "Agent"
                 ],
        "Params":  [
                       [
                           "Source",
                           "Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SourceSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Destination",
                           "Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "DestinationSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Force",
                           "If this switch is enabled, the Operator will be dropped and recreated on Destination.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Copy-DbaAgentSharedSchedule,Copy-SqlSharedSchedule",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Copy-DbaAgentSchedule migrates shared job schedules from one SQL Server to another.",
        "Name":  "Copy-DbaAgentSchedule",
        "Links":  "https://dbatools.io/Copy-DbaAgentSchedule",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eCopy-DbaAgentSchedule -Source sqlserver2014a -Destination sqlcluster\nCopies all shared job schedules from sqlserver2014a to sqlcluster using Windows credentials. If shared job schedules with the same name exist on sqlcluster, they will be skipped.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eCopy-DbaAgentSchedule -Source sqlserver2014a -Destination sqlcluster -WhatIf -Force\nShows what would happen if the command were executed using force.",
        "Syntax":  "Copy-DbaAgentSchedule [-Source] \u003cDbaInstanceParameter\u003e [[-SourceSqlCredential] \u003cPSCredential\u003e] [-Destination] \u003cDbaInstanceParameter[]\u003e [[-DestinationSqlCredential] \u003cPSCredential\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Copy-DbaAgentServer",
        "Description":  "A wrapper function that calls the associated Copy command for each of the object types seen in SSMS under SQL Server Agent. This also copies all of the the SQL Agent properties (job history max rows, DBMail profile name, etc.).\n\nYou must have sysadmin access and server version must be SQL Server version 2000 or greater.",
        "Tags":  [
                     "Migration",
                     "SqlServerAgent",
                     "SqlAgent"
                 ],
        "Params":  [
                       [
                           "Source",
                           "Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SourceSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Destination",
                           "Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "DestinationSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "DisableJobsOnDestination",
                           "If this switch is enabled, the jobs will be disabled on Destination after copying.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "DisableJobsOnSource",
                           "If this switch is enabled, the jobs will be disabled on Source after copying.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Force",
                           "If this switch is enabled, existing objects on Destination with matching names from Source will be dropped, then copied.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Copy-DbaSqlServerAgent,Copy-SqlServerAgent",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Copy SQL Server Agent from one server to another.",
        "Name":  "Copy-DbaAgentServer",
        "Links":  "https://dbatools.io/Copy-DbaAgentServer",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eCopy-DbaAgentServer -Source sqlserver2014a -Destination sqlcluster\nCopies all job server objects from sqlserver2014a to sqlcluster using Windows credentials for authentication. If job objects with the same name exist on sqlcluster, they will be skipped.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eCopy-DbaAgentServer -Source sqlserver2014a -Destination sqlcluster -SourceSqlCredential $cred\nCopies all job objects from sqlserver2014a to sqlcluster using SQL credentials to authentication to sqlserver2014a and Windows credentials to authenticate to sqlcluster.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eCopy-DbaAgentServer -Source sqlserver2014a -Destination sqlcluster -WhatIf\nShows what would happen if the command were executed.",
        "Syntax":  "Copy-DbaAgentServer [-Source] \u003cDbaInstanceParameter\u003e [[-SourceSqlCredential] \u003cPSCredential\u003e] [-Destination] \u003cDbaInstanceParameter[]\u003e [[-DestinationSqlCredential] \u003cPSCredential\u003e] [-DisableJobsOnDestination] [-DisableJobsOnSource] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Copy-DbaBackupDevice",
        "Description":  "Backups are migrated using Admin shares. If the destination directory does not exist, SQL Server\u0027s default backup directory will be used.\n\nIf a backup device with same name exists on destination, it will not be dropped and recreated unless -Force is used.",
        "Tags":  [
                     "Migration",
                     "Backup"
                 ],
        "Params":  [
                       [
                           "Source",
                           "Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SourceSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Destination",
                           "Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "DestinationSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "BackupDevice",
                           "BackupDevice to be copied. Auto-populated list of devices. If not provided all BackupDevice(s) will be copied.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Force",
                           "If this switch is enabled, backup device(s) will be dropped and recreated if they already exists on destination.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Copy-SqlBackupDevice",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Copies backup devices one by one. Copies both SQL code and the backup file itself.",
        "Name":  "Copy-DbaBackupDevice",
        "Links":  "https://dbatools.io/Copy-DbaBackupDevice",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eCopy-DbaBackupDevice -Source sqlserver2014a -Destination sqlcluster\nCopies all server backup devices from sqlserver2014a to sqlcluster using Windows credentials. If backup devices with the same name exist on sqlcluster, they will be skipped.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eCopy-DbaBackupDevice -Source sqlserver2014a -Destination sqlcluster -BackupDevice backup01 -SourceSqlCredential $cred -Force\nCopies only the backup device named backup01 from sqlserver2014a to sqlcluster using SQL credentials for sqlserver2014a    and Windows credentials for sqlcluster. If a backup device with the same \r\nname exists on sqlcluster, it will be dropped and recreated because -Force was used.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eCopy-DbaBackupDevice -Source sqlserver2014a -Destination sqlcluster -WhatIf -Force\nShows what would happen if the command were executed using force.",
        "Syntax":  "Copy-DbaBackupDevice [-Source] \u003cDbaInstanceParameter\u003e [[-SourceSqlCredential] \u003cPSCredential\u003e] [-Destination] \u003cDbaInstanceParameter[]\u003e [[-DestinationSqlCredential] \u003cPSCredential\u003e] [[-BackupDevice] \u003cObject[]\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Copy-DbaCmsRegServer",
        "Description":  "Copy-DbaCmsRegServer copies all groups, subgroups, and server instances from one SQL Server to another.",
        "Tags":  "Migration",
        "Params":  [
                       [
                           "Source",
                           "Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SourceSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Destination",
                           "Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "DestinationSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Group",
                           "This is an auto-populated array that contains your Central Management Server top-level groups on Source. You can specify one, many or none.\nIf Group is not specified, all groups in your Central Management Server will be copied.",
                           "CMSGroup",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SwitchServerName",
                           "If this switch is enabled, all instance names will be changed from Source to Destination.\nCentral Management Server does not allow you to add a shared registered server with the same name as the Configuration Server.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Force",
                           "If this switch is enabled, group(s) will be dropped and recreated if they already exists on destination.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Copy-DbaCentralManagementServer,Copy-SqlCentralManagementServer",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Migrates SQL Server Central Management groups and server instances from one SQL Server to another.",
        "Name":  "Copy-DbaCmsRegServer",
        "Links":  "https://dbatools.io/Copy-DbaCmsRegServer",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eCopy-DbaCmsRegServer -Source sqlserver2014a -Destination sqlcluster\nAll groups, subgroups, and server instances are copied from sqlserver2014a CMS to sqlcluster CMS.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eCopy-DbaCmsRegServer -Source sqlserver2014a -Destination sqlcluster -Group Group1,Group3\nTop-level groups Group1 and Group3 along with their subgroups and server instances are copied from sqlserver to sqlcluster.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eCopy-DbaCmsRegServer -Source sqlserver2014a -Destination sqlcluster -Group Group1,Group3 -SwitchServerName -SourceSqlCredential $SourceSqlCredential -DestinationSqlCredential \r\n$DestinationSqlCredential\nTop-level groups Group1 and Group3 along with their subgroups and server instances are copied from sqlserver to sqlcluster. When adding sql instances to sqlcluster, if the server name of the \r\nmigrating instance is \"sqlcluster\", it will be switched to \"sqlserver\".\nIf SwitchServerName is not specified, \"sqlcluster\" will be skipped.",
        "Syntax":  "Copy-DbaCmsRegServer [-Source] \u003cDbaInstanceParameter\u003e [[-SourceSqlCredential] \u003cPSCredential\u003e] [-Destination] \u003cDbaInstanceParameter[]\u003e [[-DestinationSqlCredential] \u003cPSCredential\u003e] [[-Group] \u003cString[]\u003e] [-SwitchServerName] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Copy-DbaCredential",
        "Description":  "By using password decryption techniques provided by Antti Rantasaari (NetSPI, 2014), this script migrates SQL Server Credentials from one server to another while maintaining username and password.\n\nCredit: https://blog.netspi.com/decrypting-mssql-database-link-server-passwords/",
        "Tags":  [
                     "WSMan",
                     "Migration"
                 ],
        "Params":  [
                       [
                           "Source",
                           "Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SourceSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Credential",
                           "This command requires access to the Windows OS via PowerShell remoting. Use this credential to connect to Windows using alternative credentials.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Destination",
                           "Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "DestinationSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Name",
                           "Only include specific names\r\nNote: if spaces exist in the credential name, you will have to type \"\" or \u0027\u0027 around it.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeName",
                           "Excluded credential names",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Identity",
                           "Only include specific identities\r\nNote: if spaces exist in the credential identity, you will have to type \"\" or \u0027\u0027 around it.",
                           "CredentialIdentity",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeIdentity",
                           "Excluded identities",
                           "ExcludeCredentialIdentity",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Force",
                           "If this switch is enabled, the Credential will be dropped and recreated if it already exists on Destination.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Copy-SqlCredential",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Copy-DbaCredential migrates SQL Server Credentials from one SQL Server to another while maintaining Credential passwords.",
        "Name":  "Copy-DbaCredential",
        "Links":  "https://dbatools.io/Copy-DbaCredential",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eCopy-DbaCredential -Source sqlserver2014a -Destination sqlcluster\nCopies all SQL Server Credentials on sqlserver2014a to sqlcluster. If Credentials exist on destination, they will be skipped.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eCopy-DbaCredential -Source sqlserver2014a -Destination sqlcluster -Name \"PowerShell Proxy Account\" -Force\nCopies over one SQL Server Credential (PowerShell Proxy Account) from sqlserver to sqlcluster. If the Credential already exists on the destination, it will be dropped and recreated.",
        "Syntax":  "Copy-DbaCredential [-Source] \u003cDbaInstanceParameter\u003e [[-SourceSqlCredential] \u003cPSCredential\u003e] [[-Credential] \u003cPSCredential\u003e] [-Destination] \u003cDbaInstanceParameter[]\u003e [[-DestinationSqlCredential] \u003cPSCredential\u003e] [[-Name] \u003cString[]\u003e] [[-ExcludeName] \u003cString[]\u003e] [[-Identity] \u003cString[]\u003e] [[-ExcludeIdentity] \u003cString[]\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Copy-DbaCustomError",
        "Description":  "By default, all custom errors are copied. The -CustomError parameter is auto-populated for command-line completion and can be used to copy only specific custom errors.\n\nIf the custom error already exists on the destination, it will be skipped unless -Force is used. The us_english version must be created first. If you drop the us_english version, all the other languages will be dropped for that specific ID as well.",
        "Tags":  [
                     "Migration",
                     "CustomError"
                 ],
        "Params":  [
                       [
                           "Source",
                           "Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SourceSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Destination",
                           "Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "DestinationSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "CustomError",
                           "The custom error(s) to process. This list is auto-populated from the server. If unspecified, all custom errors will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeCustomError",
                           "The custom error(s) to exclude. This list is auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Force",
                           "If this switch is enabled, the custom error will be dropped and recreated if it already exists on Destination.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Copy-SqlCustomError",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Copy-DbaCustomError migrates custom errors (user defined messages), by the custom error ID, from one SQL Server to another.",
        "Name":  "Copy-DbaCustomError",
        "Links":  "https://dbatools.io/Copy-DbaCustomError",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eCopy-DbaCustomError -Source sqlserver2014a -Destination sqlcluster\nCopies all server custom errors from sqlserver2014a to sqlcluster using Windows credentials. If custom errors with the same name exist on sqlcluster, they will be skipped.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eCopy-DbaCustomError -Source sqlserver2014a -SourceSqlCredential $scred -Destination sqlcluster -DestinationSqlCredential $dcred -CustomError 60000 -Force\nCopies only the custom error with ID number 60000 from sqlserver2014a to sqlcluster using SQL credentials for sqlserver2014a and Windows credentials for sqlcluster. If a custom error with the same \r\nname exists on sqlcluster, it will be updated because -Force was used.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eCopy-DbaCustomError -Source sqlserver2014a -Destination sqlcluster -ExcludeCustomError 60000 -Force\nCopies all the custom errors found on sqlserver2014a except the custom error with ID number 60000 to sqlcluster. If a custom error with the same name exists on sqlcluster, it will be updated because \r\n-Force was used.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eCopy-DbaCustomError -Source sqlserver2014a -Destination sqlcluster -WhatIf -Force\nShows what would happen if the command were executed using force.",
        "Syntax":  "Copy-DbaCustomError [-Source] \u003cDbaInstanceParameter\u003e [[-SourceSqlCredential] \u003cPSCredential\u003e] [-Destination] \u003cDbaInstanceParameter[]\u003e [[-DestinationSqlCredential] \u003cPSCredential\u003e] [[-CustomError] \u003cObject[]\u003e] [[-ExcludeCustomError] \u003cObject[]\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Copy-DbaDatabase",
        "Description":  "This script provides the ability to migrate databases using detach/copy/attach or backup/restore. This script works with named instances, clusters and SQL Server Express Edition.\n\nBy default, databases will be migrated to the destination SQL Server\u0027s default data and log directories. You can override this by specifying -ReuseSourceFolderStructure. Filestreams and filegroups are also migrated. Safety is emphasized.",
        "Tags":  [
                     "Migration",
                     "Backup",
                     "Restore"
                 ],
        "Params":  [
                       [
                           "Source",
                           "Source SQL Server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SourceSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Destination",
                           "Destination SQL Server. You may specify multiple servers.\nNote that when using -BackupRestore with multiple servers, the backup will only be performed once and backups will be deleted at the end (if you didn\u0027t specify -NoBackupCleanup).\nWhen using -DetachAttach with multiple servers, -Reattach must be specified.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "DestinationSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Migrates only specified databases. This list is auto-populated from the server for tab completion. Multiple databases may be specified as a collection.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "Excludes specified databases when performing -AllDatabases migrations. This list is auto-populated from the Source for tab completion.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AllDatabases",
                           "If this switch is enabled, all user databases will be migrated. System and support databases will not be migrated. Requires -BackupRestore or -DetachAttach.",
                           "All",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "BackupRestore",
                           "If this switch is enabled, the copy-only backup and restore method will be used to migrate the database(s). This method requires that you specify -SharedPath in a valid UNC format (\\\\server\\share).\nBackups will be immediately deleted after use unless -NoBackupCleanup is specified.",
                           "",
                           true,
                           "false",
                           "False"
                       ],
                       [
                           "SharedPath",
                           "Specifies the network location for the backup files. The SQL Server service accounts must have read/write permission on this path.",
                           "NetworkShare",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "WithReplace",
                           "If this switch is enabled, the restore is executed with WITH REPLACE.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "NoRecovery",
                           "If this switch is enabled, the restore is executed with WITH NORECOVERY. Ideal for staging.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "NoBackupCleanup",
                           "If this switch is enabled, backups generated by this cmdlet will not be deleted after they are restored. The default behavior is to delete these backups.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "NumberFiles",
                           "Number of files to split the backup. Default is 3.",
                           "",
                           false,
                           "false",
                           "3"
                       ],
                       [
                           "DetachAttach",
                           "If this switch is enabled, the detach/copy/attach method is used to perform database migrations. No files are deleted on Source. If Destination attachment fails, the Source database will be \r\nreattached. File copies are performed over administrative shares (\\\\server\\x$\\mssql) using BITS. If a database is being mirrored, the mirror will be broken prior to migration.",
                           "",
                           true,
                           "false",
                           "False"
                       ],
                       [
                           "Reattach",
                           "If this switch is enabled, all databases are reattached to Source after DetachAttach migration.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "SetSourceReadOnly",
                           "If this switch is enabled, all migrated databases are set to ReadOnly on Source prior to detach/attach \u0026 backup/restore.\nIf -Reattach is used, databases are set to read-only after reattaching.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "ReuseSourceFolderStructure",
                           "If this switch is enabled, databases will be migrated to a data and log directory structure on Destination mirroring that used on Source. By default, the default data and log directories for \r\nDestination will be used when the databases are migrated.\nThe structure on Source  will be kept exactly, so consider this if you\u0027re migrating between different versions and use part of Microsoft\u0027s default Sql structure (MSSql12.INSTANCE, etc)\nTo reuse Destination folder structure, use the  -WithReplace switch.",
                           "ReuseFolderStructure",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "IncludeSupportDbs",
                           "If this switch is enabled, ReportServer, ReportServerTempDb, SSISDB, and distribution databases will be copied if they exist on Source. A log file named $SOURCE-$destinstance-$date-Sqls.csv will be \r\nwritten to the current directory.\nUse of this switch requires -BackupRestore or -DetachAttach as well.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "UseLastBackup",
                           "Use the last full, diff and logs instead of performing backups. Note that the backups must exist in a location accessible by all destination servers, such a network share.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Continue",
                           "If specified, will to attempt to restore transaction log backups on top of existing database(s) in Recovering or Standby states. Only usable with -UseLastBackup",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "InputObject",
                           "Enables piped input from Get-DbaDatabase",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "NoCopyOnly",
                           "If this switch is enabled, backups will be taken without COPY_ONLY. This will break the LSN backup chain, which will interfere with the restore chain of the database.\nBy default this switch is disabled, so backups will be taken with COPY_ONLY. This will preserve the LSN backup chain.\nFor more details please refer to this MSDN article - https://msdn.microsoft.com/en-us/library/ms191495.aspx",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "SetSourceOffline",
                           "If this switch is enabled, the Source database will be set to Offline after being copied.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "NewName",
                           "If a single database is being copied, this will be used to rename the database during the copy process. Any occurrence of the original database name in the physical file names will be replaced with \r\nNewName\r\nIf specified with multiple databases a warning will be raised and the copy stopped\nThis option is mutually exclusive of Prefix",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Prefix",
                           "All copied database names and physical files will be prefixed with this string\nThis option is mutually exclusive of NewName",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Force",
                           "If this switch is enabled, existing databases on Destination with matching names from Source will be dropped. If using -DetachReattach, mirrors will be broken and the database(s) dropped from \r\nAvailability Groups.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Copy-SqlDatabase",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Migrates SQL Server databases from one SQL Server to another.",
        "Name":  "Copy-DbaDatabase",
        "Links":  "https://dbatools.io/Copy-DbaDatabase",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eCopy-DbaDatabase -Source sql2014a -Destination sql2014b -Database TestDB -BackupRestore -SharedPath \\\\fileshare\\sql\\migration\nMigrates a single user database TestDB using Backup and restore from instance sql2014a to sql2014b. Backup files are stored in \\\\fileshare\\sql\\migration.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eCopy-DbaDatabase -Source sql2012 -Destination sql2014, sql2016 -DetachAttach -Reattach\nDatabases will be migrated from sql2012 to both sql2014 and sql2016 using the detach/copy files/attach method.The following will be performed: kick all users out of the database, detach all data/log \r\nfiles, move files across the network over an admin share (\\\\SqlSERVER\\M$\\MSSql...), attach file on destination server, reattach at source. If the database files (*.mdf, *.ndf, *.ldf) on *destination* \r\nexist and aren\u0027t in use, they will be overwritten.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eCopy-DbaDatabase -Source sql2014a -Destination sqlcluster, sql2016 -BackupRestore -UseLastBackup -Force\nMigrates all user databases to sqlcluster and sql2016 using the last Full, Diff and Log backups from sql204a. If the databases exists on the destinations, they will be dropped prior to attach.\nNote that the backups must exist in a location accessible by all destination servers, such a network share.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eCopy-DbaDatabase -Source sql2014a -Destination sqlcluster -ExcludeDatabase Northwind, pubs -IncludeSupportDbs -Force -BackupRestore -SharedPath \\\\fileshare\\sql\\migration\nMigrates all user databases except for Northwind and pubs by using backup/restore (copy-only). Backup files are stored in \\\\fileshare\\sql\\migration. If the database exists on the destination, it will \r\nbe dropped prior to attach.\nIt also includes the support databases (ReportServer, ReportServerTempDb, distribution).",
        "Syntax":  "Copy-DbaDatabase [-Source \u003cDbaInstanceParameter\u003e] [-SourceSqlCredential \u003cPSCredential\u003e] -Destination \u003cDbaInstanceParameter[]\u003e [-DestinationSqlCredential \u003cPSCredential\u003e] [-Database \u003cObject[]\u003e] [-ExcludeDatabase \u003cObject[]\u003e] [-AllDatabases] -BackupRestore [-SharedPath \u003cString\u003e] [-WithReplace] [-NoRecovery] [-NoBackupCleanup] [-NumberFiles \u003cInt32\u003e] [-SetSourceReadOnly] [-ReuseSourceFolderStructure] [-IncludeSupportDbs] [-UseLastBackup] [-Continue] [-InputObject \u003cDatabase[]\u003e] [-NoCopyOnly] [-SetSourceOffline] [-NewName \u003cString\u003e] [-Prefix \u003cString\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] \r\n[\u003cCommonParameters\u003e]\nCopy-DbaDatabase [-Source \u003cDbaInstanceParameter\u003e] [-SourceSqlCredential \u003cPSCredential\u003e] -Destination \u003cDbaInstanceParameter[]\u003e [-DestinationSqlCredential \u003cPSCredential\u003e] [-Database \u003cObject[]\u003e] [-ExcludeDatabase \u003cObject[]\u003e] [-AllDatabases] -DetachAttach [-Reattach] [-SetSourceReadOnly] [-ReuseSourceFolderStructure] [-IncludeSupportDbs] [-InputObject \u003cDatabase[]\u003e] [-NoCopyOnly] [-SetSourceOffline] [-NewName \u003cString\u003e] [-Prefix \u003cString\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Copy-DbaDataCollector",
        "Description":  "By default, all data collector objects are migrated. If the object already exists on the destination, it will be skipped unless -Force is used.\n\nThe -CollectionSet parameter is auto-populated for command-line completion and can be used to copy only specific objects.",
        "Tags":  [
                     "Migration",
                     "DataCollection"
                 ],
        "Params":  [
                       [
                           "Source",
                           "Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2008 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SourceSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Destination",
                           "Destination Sql Server. You must have sysadmin access and server version must be SQL Server version 2008 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "DestinationSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "CollectionSet",
                           "The collection set(s) to process - this list is auto-populated from the server. If unspecified, all collection sets will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeCollectionSet",
                           "The collection set(s) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "NoServerReconfig",
                           "Upcoming parameter to enable server reconfiguration",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Force",
                           "If collection sets exists on destination server, it will be dropped and recreated.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Copy-DbaSqlDataCollector,Copy-SqlDataCollector",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Migrates user SQL Data Collector collection sets. SQL Data Collector configuration is on the agenda, but it\u0027s hard.",
        "Name":  "Copy-DbaDataCollector",
        "Links":  "https://dbatools.io/Copy-DbaDataCollector",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eCopy-DbaDataCollector -Source sqlserver2014a -Destination sqlcluster\nCopies all Data Collector Objects and Configurations from sqlserver2014a to sqlcluster, using Windows credentials.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eCopy-DbaDataCollector -Source sqlserver2014a -Destination sqlcluster -SourceSqlCredential $cred\nCopies all Data Collector Objects and Configurations from sqlserver2014a to sqlcluster, using SQL credentials for sqlserver2014a and Windows credentials for sqlcluster.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eCopy-DbaDataCollector -Source sqlserver2014a -Destination sqlcluster -WhatIf\nShows what would happen if the command were executed.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eCopy-DbaDataCollector -Source sqlserver2014a -Destination sqlcluster -CollectionSet \u0027Server Activity\u0027, \u0027Table Usage Analysis\u0027\nCopies two Collection Sets, Server Activity and Table Usage Analysis, from sqlserver2014a to sqlcluster.",
        "Syntax":  "Copy-DbaDataCollector [-Source] \u003cDbaInstanceParameter\u003e [[-SourceSqlCredential] \u003cPSCredential\u003e] [-Destination] \u003cDbaInstanceParameter[]\u003e [[-DestinationSqlCredential] \u003cPSCredential\u003e] [[-CollectionSet] \u003cObject[]\u003e] [[-ExcludeCollectionSet] \u003cObject[]\u003e] [-NoServerReconfig] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Copy-DbaDbAssembly",
        "Description":  "By default, all assemblies are copied.\n\nIf the assembly already exists on the destination, it will be skipped unless -Force is used.\n\nThis script does not yet copy dependencies or dependent objects.",
        "Tags":  [
                     "Migration",
                     "Assembly"
                 ],
        "Params":  [
                       [
                           "Source",
                           "Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SourceSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Destination",
                           "Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "DestinationSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Assembly",
                           "The assembly(ies) to process. This list is auto-populated from the server. If unspecified, all assemblies will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeAssembly",
                           "The assembly(ies) to exclude. This list is auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Force",
                           "If this switch is enabled, existing assemblies on Destination with matching names from Source will be dropped.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Copy-DbaDatabaseAssembly,Copy-SqlDatabaseAssembly",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Copy-DbaDbAssembly migrates assemblies from one SQL Server to another.",
        "Name":  "Copy-DbaDbAssembly",
        "Links":  "http://dbatools.io/Get-SqlDatabaseAssembly",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eCopy-DbaDbAssembly -Source sqlserver2014a -Destination sqlcluster\nCopies all assemblies from sqlserver2014a to sqlcluster using Windows credentials. If assemblies with the same name exist on sqlcluster, they will be skipped.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eCopy-DbaDbAssembly -Source sqlserver2014a -Destination sqlcluster -Assembly dbname.assemblyname, dbname3.anotherassembly -SourceSqlCredential $cred -Force\nCopies two assemblies, the dbname.assemblyname and dbname3.anotherassembly from sqlserver2014a to sqlcluster using SQL credentials for sqlserver2014a and Windows credentials for sqlcluster. If an \r\nassembly with the same name exists on sqlcluster, it will be dropped and recreated because -Force was used.\nIn this example, anotherassembly will be copied to the dbname3 database on the server sqlcluster.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eCopy-DbaDbAssembly -Source sqlserver2014a -Destination sqlcluster -WhatIf -Force\nShows what would happen if the command were executed using force.",
        "Syntax":  "Copy-DbaDbAssembly [-Source] \u003cDbaInstanceParameter\u003e [[-SourceSqlCredential] \u003cPSCredential\u003e] [-Destination] \u003cDbaInstanceParameter[]\u003e [[-DestinationSqlCredential] \u003cPSCredential\u003e] [[-Assembly] \u003cObject[]\u003e] [[-ExcludeAssembly] \u003cObject[]\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Copy-DbaDbMail",
        "Description":  "By default, all mail configurations for Profiles, Accounts, Mail Servers and Configs are copied.",
        "Tags":  [
                     "Migration",
                     "Mail"
                 ],
        "Params":  [
                       [
                           "Source",
                           "Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "Destination",
                           "Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "Type",
                           "Specifies the object type to migrate. Valid options are \"Job\", \"Alert\" and \"Operator\". When Type is specified, all categories from the selected type will be migrated.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SourceSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "DestinationSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Force",
                           "If this switch is enabled, existing objects on Destination with matching names from Source will be dropped.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Copy-DbaDatabaseMail,Copy-SqlDatabaseMail",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Migrates Mail Profiles, Accounts, Mail Servers and Mail Server Configs from one SQL Server to another.",
        "Name":  "Copy-DbaDbMail",
        "Links":  "https://dbatools.io/Copy-DbaDbMail",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eCopy-DbaDbMail -Source sqlserver2014a -Destination sqlcluster\nCopies all database mail objects from sqlserver2014a to sqlcluster using Windows credentials. If database mail objects with the same name exist on sqlcluster, they will be skipped.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eCopy-DbaDbMail -Source sqlserver2014a -Destination sqlcluster -SourceSqlCredential $cred\nCopies all database mail objects from sqlserver2014a to sqlcluster using SQL credentials for sqlserver2014a and Windows credentials for sqlcluster.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eCopy-DbaDbMail -Source sqlserver2014a -Destination sqlcluster -WhatIf\nShows what would happen if the command were executed.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eCopy-DbaDbMail -Source sqlserver2014a -Destination sqlcluster -EnableException\nPerforms execution of function, and will throw a terminating exception if something breaks",
        "Syntax":  "Copy-DbaDbMail -Source \u003cDbaInstanceParameter\u003e -Destination \u003cDbaInstanceParameter[]\u003e [-SourceSqlCredential \u003cPSCredential\u003e] [-DestinationSqlCredential \u003cPSCredential\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nCopy-DbaDbMail -Source \u003cDbaInstanceParameter\u003e -Destination \u003cDbaInstanceParameter[]\u003e [-Type \u003cString[]\u003e] [-SourceSqlCredential \u003cPSCredential\u003e] [-DestinationSqlCredential \u003cPSCredential\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Copy-DbaDbQueryStoreOption",
        "Description":  "Copies the configuration of a Query Store enabled database and sets the copied configuration on other databases.",
        "Tags":  "QueryStore",
        "Params":  [
                       [
                           "Source",
                           "Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2016 or higher.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SourceSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SourceDatabase",
                           "Specifies the database to copy the Query Store configuration from.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Destination",
                           "Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2016 or higher.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "DestinationSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "DestinationDatabase",
                           "Specifies a list of databases that will receive a copy of the Query Store configuration of the SourceDatabase.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Exclude",
                           "Specifies a list of databases which will NOT receive a copy of the Query Store configuration.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AllDatabases",
                           "If this switch is enabled, the Query Store configuration will be copied to all databases on the destination instance.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Copy-DbaQueryStoreConfig",
        "Author":  "Enrico van de Laar (@evdlaar)",
        "Synopsis":  "Copies the configuration of a Query Store enabled database and sets the copied configuration on other databases.",
        "Name":  "Copy-DbaDbQueryStoreOption",
        "Links":  "https://dbatools.io/Copy-QueryStoreConfig",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eCopy-DbaDbQueryStoreOption -Source ServerA\\SQL -SourceDatabase AdventureWorks -Destination ServerB\\SQL -AllDatabases\nCopy the Query Store configuration of the AdventureWorks database in the ServerA\\SQL instance and apply it on all user databases in the ServerB\\SQL Instance.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eCopy-DbaDbQueryStoreOption -Source ServerA\\SQL -SourceDatabase AdventureWorks -Destination ServerB\\SQL -DestinationDatabase WorldWideTraders\nCopy the Query Store configuration of the AdventureWorks database in the ServerA\\SQL instance and apply it to the WorldWideTraders database in the ServerB\\SQL Instance.",
        "Syntax":  "Copy-DbaDbQueryStoreOption [-Source] \u003cDbaInstanceParameter\u003e [[-SourceSqlCredential] \u003cPSCredential\u003e] [-SourceDatabase] \u003cObject\u003e [-Destination] \u003cDbaInstanceParameter[]\u003e [[-DestinationSqlCredential] \u003cPSCredential\u003e] [[-DestinationDatabase] \u003cObject[]\u003e] [[-Exclude] \u003cObject[]\u003e] [-AllDatabases] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Copy-DbaDbTableData",
        "Description":  "Copies data between SQL Server tables using SQL Bulk Copy.\nThe same can be achieved also doing\n$sourcetable = Invoke-DbaQuery -SqlInstance instance1 ... -As DataTable\nWrite-DbaDataTable -SqlInstance ... -InputObject $sourcetable\nbut it will force buffering the contents on the table in memory (high RAM usage for large tables).\nWith this function, a streaming copy will be done in the most speedy and least resource-intensive way.",
        "Tags":  "Migration",
        "Params":  [
                       [
                           "SqlInstance",
                           "Source SQL Server.You must have sysadmin access and server version must be SQL Server version 2000 or greater.",
                           "ServerInstance,SqlServer,Source",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Destination",
                           "Destination Sql Server. You must have sysadmin access and server version must be SQL Server version 2000 or greater.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "DestinationSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database to copy the table from.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "DestinationDatabase",
                           "The database to copy the table to. If not specified, it is assumed to be the same of Database",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Table",
                           "Define a specific table you would like to use as source. You can specify a three-part name like db.sch.tbl.\r\nIf the object has special characters please wrap them in square brackets [ ].\r\nThis dbo.First.Table will try to find table named \u0027Table\u0027 on schema \u0027First\u0027 and database \u0027dbo\u0027.\r\nThe correct way to find table named \u0027First.Table\u0027 on schema \u0027dbo\u0027 is passing dbo.[First.Table]",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Query",
                           "If you want to copy only a portion of a table or selected tables, specify the query.\r\nEnsure to select all required columns. Calculated Columns or columns with default values may be excluded.\r\nThe tablename should be a full three-part name in form [Database].[Schema].[Table]",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AutoCreateTable",
                           "Creates the destination table if it does not already exist, based off of the \"Export...\" script of the source table.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "BatchSize",
                           "The BatchSize for the import defaults to 5000.",
                           "",
                           false,
                           "false",
                           "50000"
                       ],
                       [
                           "NotifyAfter",
                           "Sets the option to show the notification after so many rows of import",
                           "",
                           false,
                           "false",
                           "5000"
                       ],
                       [
                           "DestinationTable",
                           "The table you want to use as destination. If not specified, it is assumed to be the same of Table",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "NoTableLock",
                           "If this switch is enabled, a table lock (TABLOCK) will not be placed on the destination table. By default, this operation will lock the destination table while running.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "CheckConstraints",
                           "If this switch is enabled, the SqlBulkCopy option to process check constraints will be enabled.\nPer Microsoft \"Check constraints while data is being inserted. By default, constraints are not checked.\"",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "FireTriggers",
                           "If this switch is enabled, the SqlBulkCopy option to fire insert triggers will be enabled.\nPer Microsoft \"When specified, cause the server to fire the insert triggers for the rows being inserted into the Database.\"",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "KeepIdentity",
                           "If this switch is enabled, the SqlBulkCopy option to preserve source identity values will be enabled.\nPer Microsoft \"Preserve source identity values. When not specified, identity values are assigned by the destination.\"",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "KeepNulls",
                           "If this switch is enabled, the SqlBulkCopy option to preserve NULL values will be enabled.\nPer Microsoft \"Preserve null values in the destination table regardless of the settings for default values. When not specified, null values are replaced by default values where applicable.\"",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Truncate",
                           "If this switch is enabled, the destination table will be truncated after prompting for confirmation.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "bulkCopyTimeOut",
                           "Value in seconds for the BulkCopy operations timeout. The default is 30 seconds.",
                           "",
                           false,
                           "false",
                           "5000"
                       ],
                       [
                           "InputObject",
                           "Enables piping of Table objects from Get-DbaDbTable",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Copy-DbaTableData",
        "Author":  "Simone Bizzotto (@niphlod)",
        "Synopsis":  "Copies data between SQL Server tables.",
        "Name":  "Copy-DbaDbTableData",
        "Links":  "https://dbatools.io/Copy-DbaDbTableData",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eCopy-DbaDbTableData -SqlInstance sql1 -Destination sql2 -Database dbatools_from -Table dbo.test_table\nCopies all the data from table dbo.test_table in database dbatools_from on sql1 to table test_table in database dbatools_from on sql2.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eCopy-DbaDbTableData -SqlInstance sql1 -Destination sql2 -Database dbatools_from -DestinationDatabase dbatools_dest -Table [Schema].[test table]\nCopies all the data from table [Schema].[test table] in database dbatools_from on sql1 to table [Schema].[test table] in database dbatools_dest on sql2\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaDbTable -SqlInstance sql1 -Database tempdb -Table tb1, tb2 | Copy-DbaDbTableData -DestinationTable tb3\nCopies all data from tables tb1 and tb2 in tempdb on sql1 to tb3 in tempdb on sql1\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaDbTable -SqlInstance sql1 -Database tempdb -Table tb1, tb2 | Copy-DbaDbTableData -Destination sql2\nCopies data from tbl1 in tempdb on sql1 to tbl1 in tempdb on sql2\r\nthen\r\nCopies data from tbl2 in tempdb on sql1 to tbl2 in tempdb on sql2\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eCopy-DbaDbTableData -SqlInstance sql1 -Destination sql2 -Database dbatools_from -Table test_table -KeepIdentity -Truncate\nCopies all the data in table test_table from sql1 to sql2, using the database dbatools_from, keeping identity columns and truncating the destination\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003e$params = @{\n\u003e\u003e SourceSqlInstance = \u0027sql1\u0027\r\n\u003e\u003e DestinationSqlInstance = \u0027sql2\u0027\r\n\u003e\u003e Database = \u0027dbatools_from\u0027\r\n\u003e\u003e DestinationDatabase = \u0027dbatools_dest\u0027\r\n\u003e\u003e Table = \u0027[Schema].[Table]\u0027\r\n\u003e\u003e DestinationTable = \u0027[dbo].[Table.Copy]\u0027\r\n\u003e\u003e KeepIdentity = $true\r\n\u003e\u003e KeepNulls = $true\r\n\u003e\u003e Truncate = $true\r\n\u003e\u003e BatchSize = 10000\r\n\u003e\u003e }\r\n\u003e\u003e\r\nPS C:\\\u003e Copy-DbaDbTableData @params\nCopies all the data from table [Schema].[Table] in database dbatools_from on sql1 to table [dbo].[Table.Copy] in database dbatools_dest on sql2\r\nKeeps identity columns and Nulls, truncates the destination and processes in BatchSize of 10000.",
        "Syntax":  "Copy-DbaDbTableData [[-SqlInstance] \u003cDbaInstanceParameter\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Destination] \u003cDbaInstanceParameter[]\u003e] [[-DestinationSqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cString\u003e] [[-DestinationDatabase] \u003cString\u003e] [[-Table] \u003cString[]\u003e] [[-Query] \u003cString\u003e] [-AutoCreateTable] [[-BatchSize] \u003cInt32\u003e] [[-NotifyAfter] \u003cInt32\u003e] [[-DestinationTable] \u003cString\u003e] [-NoTableLock] [-CheckConstraints] [-FireTriggers] [-KeepIdentity] [-KeepNulls] [-Truncate] [[-bulkCopyTimeOut] \u003cInt32\u003e] [[-InputObject] \u003cTable[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Copy-DbaEndpoint",
        "Description":  "By default, all endpoints are copied.\n\nIf the endpoint already exists on the destination, it will be skipped unless -Force is used.",
        "Tags":  [
                     "Migration",
                     "Endpoint"
                 ],
        "Params":  [
                       [
                           "Source",
                           "Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SourceSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Destination",
                           "Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "DestinationSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Endpoint",
                           "The endpoint(s) to process. This list is auto-populated from the server. If unspecified, all endpoints will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeEndpoint",
                           "The endpoint(s) to exclude. This list is auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Force",
                           "If this switch is enabled, existing endpoints on Destination with matching names from Source will be dropped.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Copy-SqlEndpoint",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Copy-DbaEndpoint migrates server endpoints from one SQL Server to another.",
        "Name":  "Copy-DbaEndpoint",
        "Links":  "https://dbatools.io/Copy-DbaEndpoint",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eCopy-DbaEndpoint -Source sqlserver2014a -Destination sqlcluster\nCopies all server endpoints from sqlserver2014a to sqlcluster, using Windows credentials. If endpoints with the same name exist on sqlcluster, they will be skipped.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eCopy-DbaEndpoint -Source sqlserver2014a -SourceSqlCredential $cred -Destination sqlcluster -Endpoint tg_noDbDrop -Force\nCopies only the tg_noDbDrop endpoint from sqlserver2014a to sqlcluster using SQL credentials for sqlserver2014a and Windows credentials for sqlcluster. If an endpoint with the same name exists on \r\nsqlcluster, it will be dropped and recreated because -Force was used.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eCopy-DbaEndpoint -Source sqlserver2014a -Destination sqlcluster -WhatIf -Force\nShows what would happen if the command were executed using force.",
        "Syntax":  "Copy-DbaEndpoint [-Source] \u003cDbaInstanceParameter\u003e [[-SourceSqlCredential] \u003cPSCredential\u003e] [-Destination] \u003cDbaInstanceParameter[]\u003e [[-DestinationSqlCredential] \u003cPSCredential\u003e] [[-Endpoint] \u003cObject[]\u003e] [[-ExcludeEndpoint] \u003cObject[]\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Copy-DbaLinkedServer",
        "Description":  "By using password decryption techniques provided by Antti Rantasaari (NetSPI, 2014), this script migrates SQL Server Linked Servers from one server to another, while maintaining username and password.\n\nCredit: https://blog.netspi.com/decrypting-mssql-database-link-server-passwords/",
        "Tags":  [
                     "WSMan",
                     "Migration",
                     "LinkedServer"
                 ],
        "Params":  [
                       [
                           "Source",
                           "Source SQL Server (2005 and above). You must have sysadmin access to both SQL Server and Windows.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SourceSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Destination",
                           "Destination SQL Server (2005 and above). You must have sysadmin access to both SQL Server and Windows.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "DestinationSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "LinkedServer",
                           "The linked server(s) to process - this list is auto-populated from the server. If unspecified, all linked servers will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeLinkedServer",
                           "The linked server(s) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "UpgradeSqlClient",
                           "Upgrade any SqlClient Linked Server to the current Version",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Force",
                           "By default, if a Linked Server exists on the source and destination, the Linked Server is not copied over. Specifying -force will drop and recreate the Linked Server on the Destination server.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Copy-SqlLinkedServer",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Copy-DbaLinkedServer migrates Linked Servers from one SQL Server to another. Linked Server logins and passwords are migrated as well.",
        "Name":  "Copy-DbaLinkedServer",
        "Links":  "https://dbatools.io/Copy-DbaLinkedServer",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eCopy-DbaLinkedServer -Source sqlserver2014a -Destination sqlcluster\nCopies all SQL Server Linked Servers on sqlserver2014a to sqlcluster. If Linked Server exists on destination, it will be skipped.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eCopy-DbaLinkedServer -Source sqlserver2014a -Destination sqlcluster -LinkedServer SQL2K5,SQL2k -Force\nCopies over two SQL Server Linked Servers (SQL2K and SQL2K2) from sqlserver to sqlcluster. If the credential already exists on the destination, it will be dropped.",
        "Syntax":  "Copy-DbaLinkedServer [-Source] \u003cDbaInstanceParameter\u003e [[-SourceSqlCredential] \u003cPSCredential\u003e] [-Destination] \u003cDbaInstanceParameter[]\u003e [[-DestinationSqlCredential] \u003cPSCredential\u003e] [[-LinkedServer] \u003cObject[]\u003e] [[-ExcludeLinkedServer] \u003cObject[]\u003e] [-UpgradeSqlClient] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Copy-DbaLogin",
        "Description":  "SQL Server 2000: Migrates logins with SIDs, passwords, server roles and database roles.\n\nSQL Server 2005 \u0026 newer: Migrates logins with SIDs, passwords, defaultdb, server roles \u0026 securables, database permissions \u0026 securables, login attributes (enforce password policy, expiration, etc.)\n\nThe login hash algorithm changed in SQL Server 2012, and is not backwards compatible with previous SQL Server versions. This means that while SQL Server 2000 logins can be migrated to SQL Server 2012, logins created in SQL Server 2012 can only be migrated to SQL Server 2012 and above.",
        "Tags":  [
                     "Migration",
                     "Login"
                 ],
        "Params":  [
                       [
                           "Source",
                           "Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SourceSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Destination",
                           "Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "DestinationSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Login",
                           "The login(s) to process. Options for this list are auto-populated from the server. If unspecified, all logins will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeLogin",
                           "The login(s) to exclude. Options for this list are auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeSystemLogins",
                           "If this switch is enabled, NT SERVICE accounts will be skipped.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "SyncOnly",
                           "If this switch is enabled, only SQL Server login permissions, roles, etc. will be synced. Logins and users will not be added or dropped.  If a matching Login does not exist on the destination, the \r\nLogin will be skipped.\r\nCredential removal is not currently supported for this parameter.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "SyncSaName",
                           "If this switch is enabled, the name of the sa account will be synced between Source and Destination",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "OutFile",
                           "Calls Export-DbaLogin and exports all logins to a T-SQL formatted file. This does not perform a copy, so no destination is required.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Takes the parameters required from a Login object that has been piped into the command",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "LoginRenameHashtable",
                           "Pass a hash table into this parameter to be passed into Rename-DbaLogin to update the Login and mappings after the Login is completed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "KillActiveConnection",
                           "If this switch and -Force are enabled, all active connections and sessions on Destination will be killed.\nA login cannot be dropped when it has active connections on the instance.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Force",
                           "If this switch is enabled, the Login(s) will be dropped and recreated on Destination. Logins that own Agent jobs cannot be dropped at this time.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "ExcludePermissionSync",
                           "Skips permission syncs",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Copy-SqlLogin",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Migrates logins from source to destination SQL Servers. Supports SQL Server versions 2000 and newer.",
        "Name":  "Copy-DbaLogin",
        "Links":  "https://dbatools.io/Copy-DbaLogin",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eCopy-DbaLogin -Source sqlserver2014a -Destination sqlcluster -Force\nCopies all logins from Source Destination. If a SQL Login on Source exists on the Destination, the Login on Destination will be dropped and recreated.\nIf active connections are found for a login, the copy of that Login will fail as it cannot be dropped.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eCopy-DbaLogin -Source sqlserver2014a -Destination sqlcluster -Force -KillActiveConnection\nCopies all logins from Source Destination. If a SQL Login on Source exists on the Destination, the Login on Destination will be dropped and recreated.\nIf any active connections are found they will be killed.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eCopy-DbaLogin -Source sqlserver2014a -Destination sqlcluster -ExcludeLogin realcajun -SourceSqlCredential $scred -DestinationSqlCredential $dcred\nCopies all Logins from Source to Destination except for realcajun using SQL Authentication to connect to both instances.\nIf a Login already exists on the destination, it will not be migrated.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eCopy-DbaLogin -Source sqlserver2014a -Destination sqlcluster -Login realcajun, netnerds -force\nCopies ONLY Logins netnerds and realcajun. If Login realcajun or netnerds exists on Destination, the existing Login(s) will be dropped and recreated.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eCopy-DbaLogin -Source sqlserver2014a -Destination sqlcluster -SyncOnly\nSyncs only SQL Server login permissions, roles, etc. Does not add or drop logins or users.\nIf a matching Login does not exist on Destination, the Login will be skipped.\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eCopy-DbaLogin -LoginRenameHashtable @{ \"PreviousUser\" = \"newlogin\" } -Source $Sql01 -Destination Localhost -SourceSqlCredential $sqlcred\nCopies PreviousUser and then renames it to newlogin.\n-------------------------- EXAMPLE 7 --------------------------\nPS C:\\\u003eGet-DbaLogin -SqlInstance sql2016 | Out-GridView -Passthru | Copy-DbaLogin -Destination sql2017\nDisplays all available logins on sql2016 in a grid view, then copies all selected logins to sql2017.",
        "Syntax":  "Copy-DbaLogin [-SourceSqlCredential \u003cPSCredential\u003e] -Destination \u003cDbaInstanceParameter[]\u003e [-DestinationSqlCredential \u003cPSCredential\u003e] [-Login \u003cObject[]\u003e] [-ExcludeLogin \u003cObject[]\u003e] [-ExcludeSystemLogins] [-SyncOnly] [-LoginRenameHashtable \u003cHashtable\u003e] [-KillActiveConnection] [-Force] [-ExcludePermissionSync] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nCopy-DbaLogin -Source \u003cDbaInstanceParameter\u003e [-SourceSqlCredential \u003cPSCredential\u003e] -Destination \u003cDbaInstanceParameter[]\u003e [-DestinationSqlCredential \u003cPSCredential\u003e] [-Login \u003cObject[]\u003e] [-ExcludeLogin \u003cObject[]\u003e] [-ExcludeSystemLogins] [-SyncOnly] [-SyncSaName] [-LoginRenameHashtable \u003cHashtable\u003e] [-KillActiveConnection] [-Force] [-ExcludePermissionSync] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nCopy-DbaLogin [-SourceSqlCredential \u003cPSCredential\u003e] -Destination \u003cDbaInstanceParameter[]\u003e [-DestinationSqlCredential \u003cPSCredential\u003e] [-Login \u003cObject[]\u003e] [-ExcludeLogin \u003cObject[]\u003e] [-ExcludeSystemLogins] [-SyncOnly] [-SyncSaName] [-LoginRenameHashtable \u003cHashtable\u003e] [-KillActiveConnection] [-Force] [-ExcludePermissionSync] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nCopy-DbaLogin [-SourceSqlCredential \u003cPSCredential\u003e] -Destination \u003cDbaInstanceParameter[]\u003e [-DestinationSqlCredential \u003cPSCredential\u003e] [-Login \u003cObject[]\u003e] [-ExcludeLogin \u003cObject[]\u003e] [-ExcludeSystemLogins] [-SyncOnly] -OutFile \u003cString\u003e [-LoginRenameHashtable \u003cHashtable\u003e] [-KillActiveConnection] [-Force] [-ExcludePermissionSync] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nCopy-DbaLogin [-SourceSqlCredential \u003cPSCredential\u003e] -Destination \u003cDbaInstanceParameter[]\u003e [-DestinationSqlCredential \u003cPSCredential\u003e] [-Login \u003cObject[]\u003e] [-ExcludeLogin \u003cObject[]\u003e] [-ExcludeSystemLogins] [-SyncOnly] [-InputObject \u003cObject\u003e] [-LoginRenameHashtable \u003cHashtable\u003e] [-KillActiveConnection] [-Force] [-ExcludePermissionSync] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Copy-DbaPolicyManagement",
        "Description":  "By default, all policies and conditions are copied. If an object already exist on the destination, it will be skipped unless -Force is used.\n\nThe -Policy and -Condition parameters are auto-populated for command-line completion and can be used to copy only specific objects.",
        "Tags":  "Migration",
        "Params":  [
                       [
                           "Source",
                           "Source SQL Server.You must have sysadmin access and server version must be SQL Server version 2008 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SourceSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Destination",
                           "Destination Sql Server. You must have sysadmin access and server version must be SQL Server version 2008 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "DestinationSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Policy",
                           "The policy(ies) to process - this list is auto-populated from the server. If unspecified, all policies will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludePolicy",
                           "The policy(ies) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Condition",
                           "The condition(s) to process - this list is auto-populated from the server. If unspecified, all conditions will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeCondition",
                           "The condition(s) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Force",
                           "If policies exists on destination server, it will be dropped and recreated.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Copy-DbaSqlPolicyManagement,Copy-SqlPolicyManagement",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Migrates SQL Policy Based Management Objects, including both policies and conditions.",
        "Name":  "Copy-DbaPolicyManagement",
        "Links":  "https://dbatools.io/Copy-DbaPolicyManagement",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eCopy-DbaPolicyManagement -Source sqlserver2014a -Destination sqlcluster\nCopies all policies and conditions from sqlserver2014a to sqlcluster, using Windows credentials.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eCopy-DbaPolicyManagement -Source sqlserver2014a -Destination sqlcluster -SourceSqlCredential $cred\nCopies all policies and conditions from sqlserver2014a to sqlcluster, using SQL credentials for sqlserver2014a and Windows credentials for sqlcluster.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eCopy-DbaPolicyManagement -Source sqlserver2014a -Destination sqlcluster -WhatIf\nShows what would happen if the command were executed.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eCopy-DbaPolicyManagement -Source sqlserver2014a -Destination sqlcluster -Policy \u0027xp_cmdshell must be disabled\u0027\nCopies only one policy, \u0027xp_cmdshell must be disabled\u0027 from sqlserver2014a to sqlcluster. No conditions are migrated.",
        "Syntax":  "Copy-DbaPolicyManagement [-Source] \u003cDbaInstanceParameter\u003e [[-SourceSqlCredential] \u003cPSCredential\u003e] [-Destination] \u003cDbaInstanceParameter[]\u003e [[-DestinationSqlCredential] \u003cPSCredential\u003e] [[-Policy] \u003cObject[]\u003e] [[-ExcludePolicy] \u003cObject[]\u003e] [[-Condition] \u003cObject[]\u003e] [[-ExcludeCondition] \u003cObject[]\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Copy-DbaResourceGovernor",
        "Description":  "By default, all non-system resource pools are migrated. If the pool already exists on the destination, it will be skipped unless -Force is used.\n\nThe -ResourcePool parameter is auto-populated for command-line completion and can be used to copy only specific objects.",
        "Tags":  [
                     "Migration",
                     "ResourceGovernor"
                 ],
        "Params":  [
                       [
                           "Source",
                           "Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2008 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SourceSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Destination",
                           "Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2008 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "DestinationSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ResourcePool",
                           "Specifies the resource pool(s) to process. Options for this list are auto-populated from the server. If unspecified, all resource pools will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeResourcePool",
                           "Specifies the resource pool(s) to exclude. Options for this list are auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Force",
                           "If this switch is enabled, the policies will be dropped and recreated on Destination.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Copy-SqlResourceGovernor",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Migrates Resource Pools",
        "Name":  "Copy-DbaResourceGovernor",
        "Links":  "https://dbatools.io/Copy-DbaResourceGovernor",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eCopy-DbaResourceGovernor -Source sqlserver2014a -Destination sqlcluster\nCopies all all non-system resource pools from sqlserver2014a to sqlcluster using Windows credentials to connect to the SQL Server instances..\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eCopy-DbaResourceGovernor -Source sqlserver2014a -Destination sqlcluster -SourceSqlCredential $cred\nCopies all all non-system resource pools from sqlserver2014a to sqlcluster using SQL credentials to connect to sqlserver2014a and Windows credentials to connect to sqlcluster.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eCopy-DbaResourceGovernor -Source sqlserver2014a -Destination sqlcluster -WhatIf\nShows what would happen if the command were executed.",
        "Syntax":  "Copy-DbaResourceGovernor [-Source] \u003cDbaInstanceParameter\u003e [[-SourceSqlCredential] \u003cPSCredential\u003e] [-Destination] \u003cDbaInstanceParameter[]\u003e [[-DestinationSqlCredential] \u003cPSCredential\u003e] [[-ResourcePool] \u003cObject[]\u003e] [[-ExcludeResourcePool] \u003cObject[]\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Copy-DbaServerAudit",
        "Description":  "By default, all audits are copied. The -Audit parameter is auto-populated for command-line completion and can be used to copy only specific audits.\n\nIf the audit already exists on the destination, it will be skipped unless -Force is used.",
        "Tags":  "Migration",
        "Params":  [
                       [
                           "Source",
                           "Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SourceSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Destination",
                           "Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "DestinationSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Audit",
                           "The audit(s) to process. Options for this list are auto-populated from the server. If unspecified, all audits will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeAudit",
                           "The audit(s) to exclude. Options for this list are auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Path",
                           "Destination file path. If not specified, the file path of the source will be used (or the default data directory).",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Force",
                           "If this switch is enabled, the audits will be dropped and recreated on Destination.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Copy-SqlAudit",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Copy-DbaServerAudit migrates server audits from one SQL Server to another.",
        "Name":  "Copy-DbaServerAudit",
        "Links":  "https://dbatools.io/Copy-DbaServerAudit",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eCopy-DbaServerAudit -Source sqlserver2014a -Destination sqlcluster\nCopies all server audits from sqlserver2014a to sqlcluster, using Windows credentials. If audits with the same name exist on sqlcluster, they will be skipped.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eCopy-DbaServerAudit -Source sqlserver2014a -Destination sqlcluster -Audit tg_noDbDrop -SourceSqlCredential $cred -Force\nCopies a single audit, the tg_noDbDrop audit from sqlserver2014a to sqlcluster, using SQL credentials for sqlserver2014a and Windows credentials for sqlcluster. If an audit with the same name exists \r\non sqlcluster, it will be dropped and recreated because -Force was used.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eCopy-DbaServerAudit -Source sqlserver2014a -Destination sqlcluster -WhatIf -Force\nShows what would happen if the command were executed using force.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eCopy-DbaServerAudit -Source sqlserver-0 -Destination sqlserver-1 -Audit audit1 -Path \u0027C:\\audit1\u0027\nCopies audit audit1 from sqlserver-0 to sqlserver-1. The file path on sqlserver-1 will be set to \u0027C:\\audit1\u0027.",
        "Syntax":  "Copy-DbaServerAudit [-Source] \u003cDbaInstanceParameter\u003e [[-SourceSqlCredential] \u003cPSCredential\u003e] [-Destination] \u003cDbaInstanceParameter[]\u003e [[-DestinationSqlCredential] \u003cPSCredential\u003e] [[-Audit] \u003cObject[]\u003e] [[-ExcludeAudit] \u003cObject[]\u003e] [[-Path] \u003cString\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Copy-DbaServerAuditSpecification",
        "Description":  "By default, all audits are copied. The -AuditSpecification parameter is auto-populated for command-line completion and can be used to copy only specific audits.\n\nIf the audit specification already exists on the destination, it will be skipped unless -Force is used.",
        "Tags":  [
                     "Migration",
                     "ServerAudit",
                     "AuditSpecification"
                 ],
        "Params":  [
                       [
                           "Source",
                           "Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SourceSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Destination",
                           "Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "DestinationSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AuditSpecification",
                           "The Server Audit Specification(s) to process. Options for this list are auto-populated from the server. If unspecified, all Server Audit Specifications will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeAuditSpecification",
                           "The Server Audit Specification(s) to exclude. Options for this list are auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Force",
                           "If this switch is enabled, the Audits Specifications will be dropped and recreated on Destination.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Copy-SqlAuditSpecification",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Copy-DbaServerAuditSpecification migrates server audit specifications from one SQL Server to another.",
        "Name":  "Copy-DbaServerAuditSpecification",
        "Links":  "https://dbatools.io/Copy-DbaServerAuditSpecification",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eCopy-DbaServerAuditSpecification -Source sqlserver2014a -Destination sqlcluster\nCopies all server audits from sqlserver2014a to sqlcluster using Windows credentials to connect. If audits with the same name exist on sqlcluster, they will be skipped.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eCopy-DbaServerAuditSpecification -Source sqlserver2014a -Destination sqlcluster -AuditSpecification tg_noDbDrop -SourceSqlCredential $cred -Force\nCopies a single audit, the tg_noDbDrop audit from sqlserver2014a to sqlcluster using SQL credentials to connect to sqlserver2014a and Windows credentials to connect to sqlcluster. If an audit \r\nspecification with the same name exists on sqlcluster, it will be dropped and recreated because -Force was used.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eCopy-DbaServerAuditSpecification -Source sqlserver2014a -Destination sqlcluster -WhatIf -Force\nShows what would happen if the command were executed using force.",
        "Syntax":  "Copy-DbaServerAuditSpecification [-Source] \u003cDbaInstanceParameter\u003e [[-SourceSqlCredential] \u003cPSCredential\u003e] [-Destination] \u003cDbaInstanceParameter[]\u003e [[-DestinationSqlCredential] \u003cPSCredential\u003e] [[-AuditSpecification] \u003cObject[]\u003e] [[-ExcludeAuditSpecification] \u003cObject[]\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Copy-DbaServerTrigger",
        "Description":  "By default, all triggers are copied. The -ServerTrigger parameter is auto-populated for command-line completion and can be used to copy only specific triggers.\n\nIf the trigger already exists on the destination, it will be skipped unless -Force is used.",
        "Tags":  "Migration",
        "Params":  [
                       [
                           "Source",
                           "Source SQL Server.You must have sysadmin access and server version must be SQL Server version 2000 or greater.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SourceSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Destination",
                           "Destination Sql Server. You must have sysadmin access and server version must be SQL Server version 2000 or greater.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "DestinationSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ServerTrigger",
                           "The Server Trigger(s) to process - this list is auto-populated from the server. If unspecified, all Server Triggers will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeServerTrigger",
                           "The Server Trigger(s) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Force",
                           "Drops and recreates the Trigger if it exists",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Copy-SqlServerTrigger",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Copy-DbaServerTrigger migrates server triggers from one SQL Server to another.",
        "Name":  "Copy-DbaServerTrigger",
        "Links":  "https://dbatools.io/Copy-DbaServerTrigger",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eCopy-DbaServerTrigger -Source sqlserver2014a -Destination sqlcluster\nCopies all server triggers from sqlserver2014a to sqlcluster, using Windows credentials. If triggers with the same name exist on sqlcluster, they will be skipped.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eCopy-DbaServerTrigger -Source sqlserver2014a -Destination sqlcluster -ServerTrigger tg_noDbDrop -SourceSqlCredential $cred -Force\nCopies a single trigger, the tg_noDbDrop trigger from sqlserver2014a to sqlcluster, using SQL credentials for sqlserver2014a and Windows credentials for sqlcluster. If a trigger with the same name \r\nexists on sqlcluster, it will be dropped and recreated because -Force was used.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eCopy-DbaServerTrigger -Source sqlserver2014a -Destination sqlcluster -WhatIf -Force\nShows what would happen if the command were executed using force.",
        "Syntax":  "Copy-DbaServerTrigger [-Source] \u003cDbaInstanceParameter\u003e [[-SourceSqlCredential] \u003cPSCredential\u003e] [-Destination] \u003cDbaInstanceParameter[]\u003e [[-DestinationSqlCredential] \u003cPSCredential\u003e] [[-ServerTrigger] \u003cObject[]\u003e] [[-ExcludeServerTrigger] \u003cObject[]\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Copy-DbaSpConfigure",
        "Description":  "By default, all configuration values are copied. The -ConfigName parameter is auto-populated for command-line completion and can be used to copy only specific configs.",
        "Tags":  [
                     "Migration",
                     "Configure",
                     "SpConfigure"
                 ],
        "Params":  [
                       [
                           "Source",
                           "Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SourceSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Destination",
                           "Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "DestinationSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ConfigName",
                           "Specifies the configuration setting to process. Options for this list are auto-populated from the server. If unspecified, all ConfigNames will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeConfigName",
                           "Specifies the configuration settings to exclude. Options for this list are auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Copy-SqlSpConfigure",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Copy-DbaSpConfigure migrates configuration values from one SQL Server to another.",
        "Name":  "Copy-DbaSpConfigure",
        "Links":  "https://dbatools.io/Copy-DbaSpConfigure",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eCopy-DbaSpConfigure -Source sqlserver2014a -Destination sqlcluster\nCopies all sp_configure settings from sqlserver2014a to sqlcluster\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eCopy-DbaSpConfigure -Source sqlserver2014a -Destination sqlcluster -ConfigName DefaultBackupCompression, IsSqlClrEnabled -SourceSqlCredential $cred\nCopies the values for IsSqlClrEnabled and DefaultBackupCompression from sqlserver2014a to sqlcluster using SQL credentials to authenticate to sqlserver2014a and Windows credentials to authenticate to \r\nsqlcluster.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eCopy-DbaSpConfigure -Source sqlserver2014a -Destination sqlcluster -ExcludeConfigName DefaultBackupCompression, IsSqlClrEnabled\nCopies all configs except for IsSqlClrEnabled and DefaultBackupCompression, from sqlserver2014a to sqlcluster.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eCopy-DbaSpConfigure -Source sqlserver2014a -Destination sqlcluster -WhatIf\nShows what would happen if the command were executed.",
        "Syntax":  "Copy-DbaSpConfigure [-Source] \u003cDbaInstanceParameter\u003e [[-SourceSqlCredential] \u003cPSCredential\u003e] [-Destination] \u003cDbaInstanceParameter[]\u003e [[-DestinationSqlCredential] \u003cPSCredential\u003e] [[-ConfigName] \u003cObject[]\u003e] [[-ExcludeConfigName] \u003cObject[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Copy-DbaSsisCatalog",
        "Description":  "By default, all folders, projects, and environments are copied. The -Project parameter can be specified to copy only one project, if desired.\n\nThe parameters get more granular from the Folder level. For example, specifying -Folder will only deploy projects/environments from within that folder.",
        "Tags":  [
                     "Migration",
                     "SSIS"
                 ],
        "Params":  [
                       [
                           "Source",
                           "Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2012 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "Destination",
                           "Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2012 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SourceSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "DestinationSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Project",
                           "Specifies a source Project name.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Folder",
                           "Specifies a source folder name.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Environment",
                           "Specifies an environment to copy.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "CreateCatalogPassword",
                           "Specifies a secure string to use in creating an SSISDB catalog on Destination. If this is specified, prompts for the password will be skipped.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableSqlClr",
                           "If this switch is enabled and Destination does not have the SQL CLR configuration option enabled, user prompts for enabling it on Destination will be skipped. SQL CLR is required for SSISDB.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Force",
                           "If this switch is enabled, the SSIS Catalog will be dropped and recreated on Destination if it already exists.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Copy-SqlSsisCatalog",
        "Author":  "Phil Schwartz (philschwartz.me, @pschwartzzz)",
        "Synopsis":  "Copy-DbaSsisCatalog migrates Folders, SSIS projects, and environments from one SQL Server to another.",
        "Name":  "Copy-DbaSsisCatalog",
        "Links":  "https://dbatools.io/Copy-DbaSsisCatalog",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eCopy-DbaSsisCatalog -Source sqlserver2014a -Destination sqlcluster\nCopies all folders, environments and SSIS Projects from sqlserver2014a to sqlcluster, using Windows credentials to authenticate to both instances. If folders with the same name exist on the \r\ndestination they will be skipped, but projects will be redeployed.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eCopy-DbaSsisCatalog -Source sqlserver2014a -Destination sqlcluster -Project Archive_Tables -SourceSqlCredential $cred -Force\nCopies a single Project, the Archive_Tables Project, from sqlserver2014a to sqlcluster using SQL credentials to authenticate to sqlserver2014a and Windows credentials to authenticate to sqlcluster. \r\nIf a Project with the same name exists on sqlcluster, it will be deleted and recreated because -Force was used.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eCopy-DbaSsisCatalog -Source sqlserver2014a -Destination sqlcluster -WhatIf -Force\nShows what would happen if the command were executed using force.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003e$SecurePW = Read-Host \"Enter password\" -AsSecureString\nPS C:\\\u003e Copy-DbaSsisCatalog -Source sqlserver2014a -Destination sqlcluster -CreateCatalogPassword $SecurePW\nDeploy entire SSIS catalog to an instance without a destination catalog. User prompts for creating the catalog on Destination will be bypassed.",
        "Syntax":  "Copy-DbaSsisCatalog [-Source] \u003cDbaInstanceParameter\u003e [-Destination] \u003cDbaInstanceParameter[]\u003e [[-SourceSqlCredential] \u003cPSCredential\u003e] [[-DestinationSqlCredential] \u003cPSCredential\u003e] [[-Project] \u003cString\u003e] [[-Folder] \u003cString\u003e] [[-Environment] \u003cString\u003e] [[-CreateCatalogPassword] \u003cSecureString\u003e] [-EnableSqlClr] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Copy-DbaSysDbUserObject",
        "Description":  "Imports all user objects found in source SQL Server\u0027s master, msdb and model databases to the destination. This is useful because many DBAs store backup/maintenance procs/tables/triggers/etc (among other things) in master or msdb.\n\nIt is also useful for migrating objects within the model database.",
        "Tags":  [
                     "Migration",
                     "SystemDatabase",
                     "UserObject"
                 ],
        "Params":  [
                       [
                           "Source",
                           "Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SourceSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Destination",
                           "Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "DestinationSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Force",
                           "Drop destination objects first. Has no effect if you use Classic. This doesn\u0027t work really well, honestly.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Classic",
                           "Perform the migration the old way",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Copy-SqlSysDbUserObjects",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Imports all user objects found in source SQL Server\u0027s master, msdb and model databases to the destination.",
        "Name":  "Copy-DbaSysDbUserObject",
        "Links":  "https://dbatools.io/Copy-DbaSysDbUserObject",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eCopy-DbaSysDbUserObject -Source $sourceServer -Destination $destserver\nCopies user objects from source to destination",
        "Syntax":  "Copy-DbaSysDbUserObject [-Source] \u003cDbaInstanceParameter\u003e [[-SourceSqlCredential] \u003cPSCredential\u003e] [-Destination] \u003cDbaInstanceParameter[]\u003e [[-DestinationSqlCredential] \u003cPSCredential\u003e] [-Force] [-Classic] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Copy-DbaXESession",
        "Description":  "Migrates SQL Extended Event Sessions except the two default sessions, AlwaysOn_health and system_health.\n\nBy default, all non-system Extended Events are migrated.",
        "Tags":  [
                     "Migration",
                     "ExtendedEvent",
                     "XEvent"
                 ],
        "Params":  [
                       [
                           "Source",
                           "Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "Destination",
                           "Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SourceSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "DestinationSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "XeSession",
                           "The Extended Event Session(s) to process. This list is auto-populated from the server. If unspecified, all Extended Event Sessions will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeXeSession",
                           "The Extended Event Session(s) to exclude. This list is auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Force",
                           "If this switch is enabled, existing Extended Events sessions on Destination with matching names from Source will be dropped.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Copy-DbaExtendedEvent,Copy-SqlExtendedEvent",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Migrates SQL Extended Event Sessions except the two default sessions, AlwaysOn_health and system_health.",
        "Name":  "Copy-DbaXESession",
        "Links":  "https://dbatools.io/Copy-DbaXESession",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eCopy-DbaXESession -Source sqlserver2014a -Destination sqlcluster\nCopies all Extended Event sessions from sqlserver2014a to sqlcluster using Windows credentials.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eCopy-DbaXESession -Source sqlserver2014a -Destination sqlcluster -SourceSqlCredential $cred\nCopies all Extended Event sessions from sqlserver2014a to sqlcluster using SQL credentials for sqlserver2014a and Windows credentials for sqlcluster.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eCopy-DbaXESession -Source sqlserver2014a -Destination sqlcluster -WhatIf\nShows what would happen if the command were executed.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eCopy-DbaXESession -Source sqlserver2014a -Destination sqlcluster -XeSession CheckQueries, MonitorUserDefinedException\nCopies only the Extended Events named CheckQueries and MonitorUserDefinedException from sqlserver2014a to sqlcluster.",
        "Syntax":  "Copy-DbaXESession [-Source] \u003cDbaInstanceParameter\u003e [-Destination] \u003cDbaInstanceParameter[]\u003e [[-SourceSqlCredential] \u003cPSCredential\u003e] [[-DestinationSqlCredential] \u003cPSCredential\u003e] [[-XeSession] \u003cObject[]\u003e] [[-ExcludeXeSession] \u003cObject[]\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Copy-DbaXESessionTemplate",
        "Description":  "Copies non-Microsoft templates from the dbatools template repository (\\bin\\xetemplates\\) to $home\\Documents\\SQL Server Management Studio\\Templates\\XEventTemplates.\n\nUseful for when you want to use the SSMS GUI.",
        "Tags":  [
                     "ExtendedEvent",
                     "XE",
                     "XEvent"
                 ],
        "Params":  [
                       [
                           "Path",
                           "The path to the template directory. Defaults to the dbatools template repository (\\bin\\xetemplates\\).",
                           "",
                           false,
                           "false",
                           "\"$script:PSModuleRoot\\bin\\xetemplates\""
                       ],
                       [
                           "Destination",
                           "Path to the Destination directory, defaults to $home\\Documents\\SQL Server Management Studio\\Templates\\XEventTemplates.",
                           "",
                           false,
                           "false",
                           "\"$home\\Documents\\SQL Server Management Studio\\Templates\\XEventTemplates\""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Copies non-Microsoft templates from the dbatools template repository (\\bin\\xetemplates\\) to $home\\Documents\\SQL Server Management Studio\\Templates\\XEventTemplates.",
        "Name":  "Copy-DbaXESessionTemplate",
        "Links":  "https://dbatools.io/Copy-DbaXESessionTemplate",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eCopy-DbaXESessionTemplate\nCopies non-Microsoft templates from the dbatools template repository (\\bin\\xetemplates\\) to $home\\Documents\\SQL Server Management Studio\\Templates\\XEventTemplates.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eCopy-DbaXESessionTemplate -Path C:\\temp\\xetemplates\nCopies your templates from C:\\temp\\xetemplates to $home\\Documents\\SQL Server Management Studio\\Templates\\XEventTemplates.",
        "Syntax":  "Copy-DbaXESessionTemplate [[-Path] \u003cString[]\u003e] [[-Destination] \u003cString\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Disable-DbaAgHadr",
        "Description":  "In order to build an AG a cluster has to be built and then the Hadr enabled for the SQL Server\nservice. This function disables that feature for the SQL Server service.",
        "Tags":  [
                     "Hadr",
                     "AG",
                     "AvailabilityGroup"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Credential",
                           "Credential object used to connect to the Windows server as a different user",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Force",
                           "Will restart SQL Server and SQL Server Agent service to apply the change.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Shawn Melton (@wsmelton), http://wsmelton.github.io",
        "Synopsis":  "Disables the Hadr service setting on the specified SQL Server.",
        "Name":  "Disable-DbaAgHadr",
        "Links":  "https://dbatools.io/Disable-DbaAgHadr",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eDisable-DbaAgHadr -SqlInstance sql2016\nSets Hadr service to disabled for the instance sql2016 but changes will not be applied until the next time the server restarts.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eDisable-DbaAgHadr -SqlInstance sql2016 -Force\nSets Hadr service to disabled for the instance sql2016, and restart the service to apply the change.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eDisable-DbaAgHadr -SqlInstance sql2012\\dev1 -Force\nSets Hadr service to disabled for the instance dev1 on sq2012, and restart the service to apply the change.",
        "Syntax":  "Disable-DbaAgHadr [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-Credential] \u003cPSCredential\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Disable-DbaFilestream",
        "Description":  "Connects to the specified SQL Server instances, and sets the status of the FileStream feature to the required value\n\nTo perform the action, the SQL Server instance must be restarted. By default we will prompt for confirmation for this action, this can be overridden with the -Force switch",
        "Tags":  "Filestream",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. Defaults to localhost.",
                           "",
                           true,
                           "true (ByPropertyName)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "true (ByPropertyName)",
                           ""
                       ],
                       [
                           "Credential",
                           "Login to the target server using alternative credentials.",
                           "",
                           false,
                           "true (ByPropertyName)",
                           ""
                       ],
                       [
                           "Force",
                           "Restart SQL Instance after changes. Use this parameter with care as it overrides whatif.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command runs. The command is not run unless Force is specified.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before running the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Stuart Moore ( @napalmgram ) | Chrissy LeMaire ( @cl )",
        "Synopsis":  "Sets the status of FileStream on specified SQL Server instances both at the server level and the instance level",
        "Name":  "Disable-DbaFilestream",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eDisable-DbaFilestream -SqlInstance server1\\instance2\nPrompts for confirmation. Disables filestream on the service and instance levels.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eDisable-DbaFilestream -SqlInstance server1\\instance2 -Confirm:$false\nDoes not prompt for confirmation. Disables filestream on the service and instance levels.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaFilestream -SqlInstance server1\\instance2, server5\\instance5, prod\\hr | Where-Object InstanceAccessLevel -gt 0 | Disable-DbaFilestream -Force\nUsing this pipeline you can scan a range of SQL instances and disable filestream on only those on which it\u0027s enabled.",
        "Syntax":  "Disable-DbaFilestream [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Credential] \u003cPSCredential\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Disable-DbaForceNetworkEncryption",
        "Description":  "Disables Force Encryption for a SQL Server instance. Note that this requires access to the Windows Server, not the SQL instance itself.\n\nThis setting is found in Configuration Manager.",
        "Tags":  "Certificate",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. Defaults to localhost.",
                           "ServerInstance,SqlServer,ComputerName",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Allows you to login to the computer (not SQL Server instance) using alternative Windows credentials.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Disables Force Encryption for a SQL Server instance",
        "Name":  "Disable-DbaForceNetworkEncryption",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eDisable-DbaForceNetworkEncryption\nDisables Force Encryption on the default (MSSQLSERVER) instance on localhost - requires (and checks for) RunAs admin.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eDisable-DbaForceNetworkEncryption -SqlInstance sql01\\SQL2008R2SP2\nDisables Force Network Encryption for the SQL2008R2SP2 on sql01. Uses Windows Credentials to both login and modify the registry.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eDisable-DbaForceNetworkEncryption -SqlInstance sql01\\SQL2008R2SP2 -WhatIf\nShows what would happen if the command were executed.",
        "Syntax":  "Disable-DbaForceNetworkEncryption [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Disable-DbaTraceFlag",
        "Description":  "The function will disable a Trace Flag that is currently running globally on the SQL Server instance(s) listed",
        "Tags":  "TraceFlag",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer,SqlServers",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "TraceFlag",
                           "Trace flag number to enable globally",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Garry Bargsley (@gbargsley), http://blog.garrybargsley.com",
        "Synopsis":  "Disable a Global Trace Flag that is currently running",
        "Name":  "Disable-DbaTraceFlag",
        "Links":  "https://dbatools.io/Disable-DbaTraceFlag",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eDisable-DbaTraceFlag -SqlInstance sql2016 -TraceFlag 3226\nDisable the globally running trace flag 3226 on SQL Server instance sql2016",
        "Syntax":  "Disable-DbaTraceFlag [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] -TraceFlag \u003cInt32[]\u003e [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Dismount-DbaDatabase",
        "Description":  "This command detaches one or more SQL Server databases. If necessary, -Force can be used to break mirrors and remove databases from availability groups prior to detaching.",
        "Tags":  "Database",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to detach.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "A collection of databases (such as returned by Get-DbaDatabase), to be detached.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "UpdateStatistics",
                           "If this switch is enabled, statistics for the database will be updated prior to detaching it.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Force",
                           "If this switch is enabled and the database is part of a mirror, the mirror will be broken. If the database is part of an Availability Group, it will be removed from the AG.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Detach-DbaDatabase",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Detach a SQL Server Database.",
        "Name":  "Dismount-DbaDatabase",
        "Links":  "https://dbatools.io/Dismount-DbaDatabase",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eDetach-DbaDatabase -SqlInstance sql2016b -Database SharePoint_Config, WSS_Logging\nDetaches SharePoint_Config and WSS_Logging from sql2016b\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDatabase -SqlInstance sql2016b -Database \u0027PerformancePoint Service Application_10032db0fa0041df8f913f558a5dc0d4\u0027 | Detach-DbaDatabase -Force\nDetaches \u0027PerformancePoint Service Application_10032db0fa0041df8f913f558a5dc0d4\u0027 from sql2016b. Since Force was specified, if the database is part of mirror, the mirror will be broken prior to \r\ndetaching.\nIf the database is part of an Availability Group, it will first be dropped prior to detachment.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaDatabase -SqlInstance sql2016b -Database WSS_Logging | Detach-DbaDatabase -Force -WhatIf\nShows what would happen if the command were to execute (without actually executing the detach/break/remove commands).",
        "Syntax":  "Dismount-DbaDatabase [-SqlCredential \u003cPSCredential\u003e] [-UpdateStatistics] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nDismount-DbaDatabase -SqlInstance \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] -Database \u003cString[]\u003e [-UpdateStatistics] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nDismount-DbaDatabase [-SqlCredential \u003cPSCredential\u003e] -InputObject \u003cDatabase[]\u003e [-UpdateStatistics] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Enable-DbaAgHadr",
        "Description":  "In order to build an AG a cluster has to be built and then the Hadr enabled for the SQL Server\nservice. This function enables that feature for the SQL Server service.",
        "Tags":  [
                     "Hadr",
                     "HA",
                     "AG",
                     "AvailabilityGroup"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Credential",
                           "Credential object used to connect to the Windows server as a different user",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Force",
                           "Will restart SQL Server and SQL Server Agent service to apply the change.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Shawn Melton (@wsmelton), http://wsmelton.github.io",
        "Synopsis":  "Enables the Hadr service setting on the specified SQL Server.",
        "Name":  "Enable-DbaAgHadr",
        "Links":  "https://dbatools.io/Enable-DbaAgHadr",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eEnable-DbaAgHadr -SqlInstance sql2016\nSets Hadr service to enabled for the instance sql2016 but changes will not be applied until the next time the server restarts.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eEnable-DbaAgHadr -SqlInstance sql2016 -Force\nSets Hadr service to enabled for the instance sql2016, and restart the service to apply the change.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eEnable-DbaAgHadr -SqlInstance sql2012\\dev1 -Force\nSets Hadr service to disabled for the instance dev1 on sq2012, and restart the service to apply the change.",
        "Syntax":  "Enable-DbaAgHadr [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-Credential] \u003cPSCredential\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Enable-DbaFilestream",
        "Description":  "Connects to the specified SQL Server instances, and Enables the FileStream feature to the required value\n\nTo perform the action, the SQL Server instance must be restarted. By default we will prompt for confirmation for this action, this can be overridden with the -Force switch",
        "Tags":  "Filestream",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. Defaults to localhost.",
                           "",
                           true,
                           "true (ByPropertyName)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "true (ByPropertyName)",
                           ""
                       ],
                       [
                           "Credential",
                           "Login to the target server using alternative credentials.",
                           "",
                           false,
                           "true (ByPropertyName)",
                           ""
                       ],
                       [
                           "FileStreamLevel",
                           "The level to of FileStream to be enabled:\r\n1 or TSql - T-Sql Access Only\r\n2 or TSqlIoStreaming - T-Sql and Win32 access enabled\r\n3 or TSqlIoStreamingRemoteClient T-Sql, Win32 and Remote access enabled",
                           "",
                           false,
                           "false",
                           "1"
                       ],
                       [
                           "ShareName",
                           "Specifies the Windows file share name to be used for storing the FILESTREAM data.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Force",
                           "Restart SQL Instance after changes. Use this parameter with care as it overrides whatif.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command runs. The command is not run unless Force is specified.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before running the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Stuart Moore ( @napalmgram ) | Chrissy LeMaire ( @cl )",
        "Synopsis":  "Enables FileStream on specified SQL Server instances",
        "Name":  "Enable-DbaFilestream",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eEnable-DbaFilestream -SqlInstance server1\\instance2 -FileStreamLevel TSql\nPS C:\\\u003e Enable-DbaFilestream -SqlInstance server1\\instance2 -FileStreamLevel 1\nThese commands are functionally equivalent, both will set Filestream level on server1\\instance2 to T-Sql Only\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaFilestream -SqlInstance server1\\instance2, server5\\instance5, prod\\hr | Where-Object InstanceAccessLevel -eq 0 | Enable-DbaFilestream -FileStreamLevel TSqlIoStreamingRemoteClient -Force\nUsing this pipeline you can scan a range of SQL instances and enable filestream on only those on which it\u0027s disabled.",
        "Syntax":  "Enable-DbaFilestream [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Credential] \u003cPSCredential\u003e] [[-FileStreamLevel] \u003cString\u003e] [[-ShareName] \u003cString\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Enable-DbaForceNetworkEncryption",
        "Description":  "Enables Force Encryption for a SQL Server instance. Note that this requires access to the Windows Server, not the SQL instance itself.\n\nThis setting is found in Configuration Manager.",
        "Tags":  [
                     "Certificate",
                     "Encryption"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer,ComputerName",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Allows you to login to the computer (not SQL Server instance) using alternative Windows credentials",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Enables Force Encryption for a SQL Server instance.",
        "Name":  "Enable-DbaForceNetworkEncryption",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eEnable-DbaForceNetworkEncryption\nEnables Force Encryption on the default (MSSQLSERVER) instance on localhost. Requires (and checks for) RunAs admin.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eEnable-DbaForceNetworkEncryption -SqlInstance sql01\\SQL2008R2SP2\nEnables Force Network Encryption for the SQL2008R2SP2 on sql01. Uses Windows Credentials to both connect and modify the registry.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eEnable-DbaForceNetworkEncryption -SqlInstance sql01\\SQL2008R2SP2 -WhatIf\nShows what would happen if the command were executed.",
        "Syntax":  "Enable-DbaForceNetworkEncryption [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Enable-DbaTraceFlag",
        "Description":  "The function will set one or multiple trace flags on the SQL Server instance(s) listed",
        "Tags":  "TraceFlag",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer,SqlServers",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "TraceFlag",
                           "Trace flag number(s) to enable globally",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Garry Bargsley (@gbargsley), http://blog.garrybargsley.com",
        "Synopsis":  "Enable Global Trace Flag(s)",
        "Name":  "Enable-DbaTraceFlag",
        "Links":  "https://dbatools.io/Enable-DbaTraceFlag",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eEnable-DbaTraceFlag -SqlInstance sql2016 -TraceFlag 3226\nEnable the trace flag 3226 on SQL Server instance sql2016\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eEnable-DbaTraceFlag -SqlInstance sql2016 -TraceFlag 1117, 1118\nEnable multiple trace flags on SQL Server instance sql2016",
        "Syntax":  "Enable-DbaTraceFlag [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] -TraceFlag \u003cInt32[]\u003e [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Expand-DbaDbLogFile",
        "Description":  "As you may already know, having a transaction log file with too many Virtual Log Files (VLFs) can hurt your database performance in many ways.\n\nExample:\nToo many VLFs can cause transaction log backups to slow down and can also slow down database recovery and, in extreme cases, even impact insert/update/delete performance.\n\nReferences:\nhttp://www.sqlskills.com/blogs/kimberly/transaction-log-vlfs-too-many-or-too-few/\nhttp://blogs.msdn.com/b/saponsqlserver/archive/2012/02/22/too-many-virtual-log-files-vlfs-can-cause-slow-database-recovery.aspx\nhttp://www.brentozar.com/blitz/high-virtual-log-file-vlf-count/\n\nIn order to get rid of this fragmentation we need to grow the file taking the following into consideration:\n- How many VLFs are created when we perform a grow operation or when an auto-grow is invoked?\n\nNote: In SQL Server 2014 this algorithm has changed (http://www.sqlskills.com/blogs/paul/important-change-vlf-creation-algorithm-sql-server-2014/)\n\nAttention:\nWe are growing in MB instead of GB because of known issue prior to SQL 2012:\nMore detail here:\nhttp://www.sqlskills.com/BLOGS/PAUL/post/Bug-log-file-growth-broken-for-multiples-of-4GB.aspx\nand\nhttp://connect.microsoft.com/SqlInstance/feedback/details/481594/log-growth-not-working-properly-with-specific-growth-sizes-vlfs-also-not-created-appropriately\nor\nhttps://connect.microsoft.com/SqlInstance/feedback/details/357502/transaction-log-file-size-will-not-grow-exactly-4gb-when-filegrowth-4gb\n\nUnderstanding related problems:\nhttp://www.sqlskills.com/blogs/kimberly/transaction-log-vlfs-too-many-or-too-few/\nhttp://blogs.msdn.com/b/saponsqlserver/archive/2012/02/22/too-many-virtual-log-files-vlfs-can-cause-slow-database-recovery.aspx\nhttp://www.brentozar.com/blitz/high-virtual-log-file-vlf-count/\n\nKnown bug before SQL Server 2012\nhttp://www.sqlskills.com/BLOGS/PAUL/post/Bug-log-file-growth-broken-for-multiples-of-4GB.aspx\nhttp://connect.microsoft.com/SqlInstance/feedback/details/481594/log-growth-not-working-properly-with-specific-growth-sizes-vlfs-also-not-created-appropriately\nhttps://connect.microsoft.com/SqlInstance/feedback/details/357502/transaction-log-file-size-will-not-grow-exactly-4gb-when-filegrowth-4gb\n\nHow it works?\nThe transaction log will grow in chunks until it reaches the desired size.\nExample: If you have a log file with 8192MB and you say that the target size is 81920MB (80GB) it will grow in chunks of 8192MB until it reaches 81920MB. 8192 -\u003e 16384 -\u003e 24576 ... 73728 -\u003e 81920",
        "Tags":  [
                     "Storage",
                     "Backup"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude. Options for this list are auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "TargetLogSize",
                           "Specifies the target size of the transaction log file in megabytes.",
                           "TargetLogSizeMB",
                           true,
                           "false",
                           "0"
                       ],
                       [
                           "IncrementSize",
                           "Specifies the amount the transaction log should grow in megabytes. If this value differs from the suggested value based on your TargetLogSize, you will be prompted to confirm your choice.\nThis value will be calculated if not specified.",
                           "IncrementSizeMB",
                           false,
                           "false",
                           "-1"
                       ],
                       [
                           "LogFileId",
                           "Specifies the file number(s) of additional transaction log files to grow.\nIf this value is not specified, only the first transaction log file will be processed.",
                           "",
                           false,
                           "false",
                           "-1"
                       ],
                       [
                           "ShrinkLogFile",
                           "If this switch is enabled, your transaction log files will be shrunk.",
                           "",
                           true,
                           "false",
                           "False"
                       ],
                       [
                           "ShrinkSize",
                           "Specifies the target size of the transaction log file for the shrink operation in megabytes.",
                           "ShrinkSizeMB",
                           true,
                           "false",
                           "0"
                       ],
                       [
                           "BackupDirectory",
                           "Specifies the location of your backups. Backups must be performed to shrink the transaction log.\nIf this value is not specified, the SQL Server instance\u0027s default backup directory will be used.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDiskSpaceValidation",
                           "If this switch is enabled, the validation for enough disk space using Get-DbaDiskSpace command will be skipped.\r\nThis can be useful when you know that you have enough space to grow your TLog but you don\u0027t have PowerShell Remoting enabled to validate it.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Expand-DbaTLogResponsibly,Expand-SqlTLogResponsibly",
        "Author":  "Claudio Silva (@ClaudioESSilva)",
        "Synopsis":  "This command will help you to automatically grow your transaction log  file in a responsible way (preventing the generation of too many VLFs).",
        "Name":  "Expand-DbaDbLogFile",
        "Links":  "https://dbatools.io/Expand-DbaDbLogFile",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eExpand-DbaDbLogFile -SqlInstance sqlcluster -Database db1 -TargetLogSize 50000\nGrows the transaction log for database db1 on sqlcluster to 50000 MB and calculates the increment size.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eExpand-DbaDbLogFile -SqlInstance sqlcluster -Database db1, db2 -TargetLogSize 10000 -IncrementSize 200\nGrows the transaction logs for databases db1 and db2 on sqlcluster to 1000MB and sets the growth increment to 200MB.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eExpand-DbaDbLogFile -SqlInstance sqlcluster -Database db1 -TargetLogSize 10000 -LogFileId 9\nGrows the transaction log file  with FileId 9 of the db1 database on sqlcluster instance to 10000MB.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eExpand-DbaDbLogFile -SqlInstance sqlcluster -Database (Get-Content D:\\DBs.txt) -TargetLogSize 50000\nGrows the transaction log of the databases specified in the file \u0027D:\\DBs.txt\u0027 on sqlcluster instance to 50000MB.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eExpand-DbaDbLogFile -SqlInstance SqlInstance -Database db1,db2 -TargetLogSize 100 -IncrementSize 10 -ShrinkLogFile -ShrinkSize 10 -BackupDirectory R:\\MSSQL\\Backup\nGrows the transaction logs for databases db1 and db2 on SQL server SQLInstance to 100MB, sets the incremental growth to 10MB, shrinks the transaction log to 10MB and uses the directory \r\nR:\\MSSQL\\Backup for the required backups.",
        "Syntax":  "Expand-DbaDbLogFile [-SqlInstance] \u003cDbaInstanceParameter\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-Database \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [-TargetLogSize] \u003cInt32\u003e [[-IncrementSize] \u003cInt32\u003e] [[-LogFileId] \u003cInt32\u003e] [-ExcludeDiskSpaceValidation] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nExpand-DbaDbLogFile [-SqlInstance] \u003cDbaInstanceParameter\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-Database \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [-TargetLogSize] \u003cInt32\u003e [[-IncrementSize] \u003cInt32\u003e] [[-LogFileId] \u003cInt32\u003e] [-ShrinkLogFile] [-ShrinkSize] \u003cInt32\u003e [[-BackupDirectory] \u003cString\u003e] [-ExcludeDiskSpaceValidation] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Export-DbaAvailabilityGroup",
        "Description":  "Exports SQL Server Availability Groups creation scripts to a T-SQL file. This is a function that is not available in SSMS.",
        "Tags":  [
                     "Hadr",
                     "HA",
                     "AG",
                     "AvailabilityGroup"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. SQL Server 2012 and above supported.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AvailabilityGroup",
                           "The Availability Group(s) to export - this list is auto-populated from the server. If unspecified, all logins will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeAvailabilityGroup",
                           "The Availability Group(s) to exclude - this list is auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Path",
                           "The directory name where the output files will be written. A sub directory with the format \u0027ServerName$InstanceName\u0027 will be created. A T-SQL scripts named \u0027AGName.sql\u0027 will be created under this \r\nsubdirectory for each scripted Availability Group.",
                           "OutputLocation,FilePath",
                           false,
                           "false",
                           "\"$([Environment]::GetFolderPath(\"MyDocuments\"))\\SqlAgExport\""
                       ],
                       [
                           "NoClobber",
                           "Do not overwrite existing export files.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows you what it\u0027d output if you were to run the command",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Confirms each step/line of output",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chris Sommer (@cjsommer), cjsommer.com",
        "Synopsis":  "Exports SQL Server Availability Groups to a T-SQL file.",
        "Name":  "Export-DbaAvailabilityGroup",
        "Links":  "https://dbatools.io/Export-DbaAvailabilityGroup",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eExport-DbaAvailabilityGroup -SqlInstance sql2012\nExports all Availability Groups from SQL server \"sql2012\". Output scripts are written to the Documents\\SqlAgExports directory by default.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eExport-DbaAvailabilityGroup -SqlInstance sql2012 -Path C:\\temp\\availability_group_exports\nExports all Availability Groups from SQL server \"sql2012\". Output scripts are written to the C:\\temp\\availability_group_exports directory.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eExport-DbaAvailabilityGroup -SqlInstance sql2012 -Path \u0027C:\\dir with spaces\\availability_group_exports\u0027 -AvailabilityGroup AG1,AG2\nExports Availability Groups AG1 and AG2 from SQL server \"sql2012\". Output scripts are written to the C:\\dir with spaces\\availability_group_exports directory.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eExport-DbaAvailabilityGroup -SqlInstance sql2014 -Path C:\\temp\\availability_group_exports -NoClobber\nExports all Availability Groups from SQL server \"sql2014\". Output scripts are written to the C:\\temp\\availability_group_exports directory. If the export file already exists it will not be overwritten.",
        "Syntax":  "Export-DbaAvailabilityGroup [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-AvailabilityGroup] \u003cObject[]\u003e] [[-ExcludeAvailabilityGroup] \u003cObject[]\u003e] [[-Path] \u003cString\u003e] [-NoClobber] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Export-DbaCmsRegServer",
        "Description":  "Exports registered servers and registered server groups to file",
        "Tags":  [
                     "RegisteredServer",
                     "CMS"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Enables piping from Get-DbaCmsRegServer, Get-DbaCmsRegServerGroup, CSVs and other objects.\nIf importing from CSV or other object, a column named ServerName is required. Optional columns include Name, Description and Group.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Path",
                           "The path to the exported file. If no path is specified, one will be created.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "CredentialPersistenceType",
                           "Used to specify how the login and passwords are persisted. Valid values include None, PersistLoginName and PersistLoginNameAndPassword.",
                           "",
                           false,
                           "false",
                           "None"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Export-DbaRegisteredServer",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Exports registered servers and registered server groups to file",
        "Name":  "Export-DbaCmsRegServer",
        "Links":  "https://dbatools.io/Export-DbaCmsRegServer",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eExport-DbaCmsRegServer -SqlInstance sql2008\nExports all Registered Server and Registered Server Groups on sql2008 to an automatically generated file name in the current directory\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaCmsRegServer -SqlInstance sql2008, sql2012 | Export-DbaCmsRegServer\nExports all registered servers on sql2008 and sql2012. Warning - each one will have its own individual file. Consider piping groups.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaCmsRegServerGroup -SqlInstance sql2008, sql2012 | Export-DbaCmsRegServer\nExports all registered servers on sql2008 and sql2012, organized by group.",
        "Syntax":  "Export-DbaCmsRegServer [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-InputObject] \u003cObject[]\u003e] [[-Path] \u003cString\u003e] [[-CredentialPersistenceType] \u003cString\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Export-DbaCredential",
        "Description":  "Exports credentials INCLUDING PASSWORDS, unless specified otherwise, to sql file.\n\nRequires remote Windows access if exporting the password.",
        "Tags":  "Credential",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Identity",
                           "The credentials to export. If unspecified, all credentials will be exported.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Credential",
                           "Login to the target OS using alternative credentials. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Path",
                           "The path to the exported sql file.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludePassword",
                           "Exports the SQL credential without any sensitive information.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Append",
                           "Append to Path",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "InputObject",
                           "Allow credentials to be piped in from Get-DbaCredential",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Exports credentials INCLUDING PASSWORDS, unless specified otherwise, to sql file.",
        "Name":  "Export-DbaCredential",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eExport-DbaCredential -SqlInstance sql2017 -Path C:\\temp\\cred.sql\nExports credentials, including passwords, from sql2017 to the file C:\\temp\\cred.sql",
        "Syntax":  "Export-DbaCredential [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-Identity] \u003cString[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Credential] \u003cPSCredential\u003e] [[-Path] \u003cString\u003e] [-ExcludePassword] [-Append] [[-InputObject] \u003cCredential[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Export-DbaDacPackage",
        "Description":  "Using SQLPackage, export a dacpac from an instance of SQL Server.\n\nNote - Extract from SQL Server is notoriously flaky - for example if you have three part references to external databases it will not work.\n\nFor help with the extract action parameters and properties, refer to https://msdn.microsoft.com/en-us/library/hh550080(v=vs.103).aspx",
        "Tags":  [
                     "Migration",
                     "Database",
                     "Dacpac"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to login to servers using alternative logins instead Integrated, accepts Credential object created by Get-Credential",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AllUserDatabases",
                           "Run command against all user databases",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Path",
                           "The directory where the .dacpac files will be exported to. Defaults to documents.",
                           "",
                           false,
                           "false",
                           "\"$home\\Documents\""
                       ],
                       [
                           "DacOption",
                           "Export options for a corresponding export type. Can be created by New-DbaDacOption -Type Dacpac | Bacpac",
                           "ExtractOptions,ExportOptions,DacExtractOptions,DacExportOptions,Options,Option",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExtendedParameters",
                           "Optional parameters used to extract the DACPAC. More information can be found at\r\nhttps://msdn.microsoft.com/en-us/library/hh550080.aspx",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExtendedProperties",
                           "Optional properties used to extract the DACPAC. More information can be found at\r\nhttps://msdn.microsoft.com/en-us/library/hh550080.aspx",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Type",
                           "Selecting the type of the export: Dacpac (default) or Bacpac.",
                           "",
                           false,
                           "false",
                           "Dacpac"
                       ],
                       [
                           "Table",
                           "List of the tables to include into the export. Should be provided as an array of strings: dbo.Table1, Table2, Schema1.Table3.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Export-DbaDacpac",
        "Author":  "Richie lee (@richiebzzzt)",
        "Synopsis":  "Exports a dacpac from a server.",
        "Name":  "Export-DbaDacPackage",
        "Links":  "https://dbatools.io/Export-DbaDacPackage",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eExport-DbaDacPackage -SqlInstance sql2016 -Database SharePoint_Config\nExports the dacpac for SharePoint_Config on sql2016 to $home\\Documents\\SharePoint_Config.dacpac\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e$options = New-DbaDacOption -Type Dacpac -Action Export\nPS C:\\\u003e $options.ExtractAllTableData = $true\r\nPS C:\\\u003e $options.CommandTimeout = 0\r\nPS C:\\\u003e Export-DbaDacPackage -SqlInstance sql2016 -Database DB1 -Options $options\nUses DacOption object to set the CommandTimeout to 0 then extracts the dacpac for DB1 on sql2016 to $home\\Documents\\DB1.dacpac including all table data.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eExport-DbaDacPackage -SqlInstance sql2016 -AllUserDatabases -ExcludeDatabase \"DBMaintenance\",\"DBMonitoring\" C:\\temp\nExports dacpac packages for all USER databases, excluding \"DBMaintenance\" \u0026 \"DBMonitoring\", on sql2016 and saves them to C:\\temp\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003e$moreparams = \"/OverwriteFiles:$true /Quiet:$true\"\nPS C:\\\u003e Export-DbaDacPackage -SqlInstance sql2016 -Database SharePoint_Config -Path C:\\temp -ExtendedParameters $moreparams\nUsing extended parameters to over-write the files and performs the extraction in quiet mode. Uses command line instead of SMO behind the scenes.",
        "Syntax":  "Export-DbaDacPackage -SqlInstance \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Database \u003cObject[]\u003e] [-ExcludeDatabase \u003cObject[]\u003e] [-AllUserDatabases] [-Path \u003cString\u003e] [-DacOption \u003cObject\u003e] [-Type \u003cString\u003e] [-Table \u003cString[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]\nExport-DbaDacPackage -SqlInstance \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Database \u003cObject[]\u003e] [-ExcludeDatabase \u003cObject[]\u003e] [-AllUserDatabases] [-Path \u003cString\u003e] [-ExtendedParameters \u003cString\u003e] [-ExtendedProperties \u003cString\u003e] [-Type \u003cString\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Export-DbaDiagnosticQuery",
        "Description":  "The default output format of Invoke-DbaDiagnosticQuery is a custom object. It can also output to CSV and Excel.\nHowever, CSV output can generate a lot of files and Excel output depends on the ImportExcel module by Doug Finke (https://github.com/dfinke/ImportExcel)\nExport-DbaDiagnosticQuery can be used to convert from the default export type to the other available export types.",
        "Tags":  "Query",
        "Params":  [
                       [
                           "InputObject",
                           "Specifies the objects to convert",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "ConvertTo",
                           "Specifies the output type. Valid choices are Excel and CSV. CSV is the default.",
                           "",
                           false,
                           "false",
                           "Csv"
                       ],
                       [
                           "Path",
                           "Specifies the path to the output files.",
                           "",
                           false,
                           "false",
                           "[Environment]::GetFolderPath(\"mydocuments\")"
                       ],
                       [
                           "Suffix",
                           "Suffix for the filename. It\u0027s datetime by default.",
                           "",
                           false,
                           "false",
                           "\"$(Get-Date -format \u0027yyyyMMddHHmmssms\u0027)\""
                       ],
                       [
                           "NoPlanExport",
                           "Use this switch to suppress exporting of .sqlplan files",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "NoQueryExport",
                           "Use this switch to suppress exporting of .sql files",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Andre Kamman (@AndreKamman), http://clouddba.io",
        "Synopsis":  "Export-DbaDiagnosticQuery can convert output generated by Invoke-DbaDiagnosticQuery to CSV or Excel",
        "Name":  "Export-DbaDiagnosticQuery",
        "Links":  "https://dbatools.io/Export-DbaDiagnosticQuery",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eInvoke-DbaDiagnosticQuery -SqlInstance sql2016 | Export-DbaDiagnosticQuery -Path c:\\temp\nConverts output from Invoke-DbaDiagnosticQuery to multiple CSV files\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e$output = Invoke-DbaDiagnosticQuery -SqlInstance sql2016\nPS C:\\\u003e Export-DbaDiagnosticQuery -InputObject $output -ConvertTo Excel\nConverts output from Invoke-DbaDiagnosticQuery to Excel worksheet(s) in the Documents folder",
        "Syntax":  "Export-DbaDiagnosticQuery [-InputObject] \u003cObject[]\u003e [[-ConvertTo] \u003cString\u003e] [[-Path] \u003cFileInfo\u003e] [[-Suffix] \u003cString\u003e] [-NoPlanExport] [-NoQueryExport] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Export-DbaExecutionPlan",
        "Description":  "Exports execution plans to disk. Can pipe from Get-DbaExecutionPlan\n\nThanks to\nhttps://www.simple-talk.com/sql/t-sql-programming/dmvs-for-query-plan-metadata/\nand\nhttp://www.scarydba.com/2017/02/13/export-plans-cache-sqlplan-file/\nfor the idea and query.",
        "Tags":  [
                     "Performance",
                     "ExecutionPlan"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Credential object used to connect to the SQL Server as a different user",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Path",
                           "The directory where all of the sqlxml files will be exported",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SinceCreation",
                           "Datetime object used to narrow the results to a date",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SinceLastExecution",
                           "Datetime object used to narrow the results to a date",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "PipedObject",
                           "Internal parameter",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Exports execution plans to disk.",
        "Name":  "Export-DbaExecutionPlan",
        "Links":  "https://dbatools.io/Export-DbaExecutionPlan",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eExport-DbaExecutionPlan -SqlInstance sqlserver2014a -Path C:\\Temp\nExports all execution plans for sqlserver2014a. Files saved in to C:\\Temp\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eExport-DbaExecutionPlan -SqlInstance sqlserver2014a -Database db1, db2 -SinceLastExecution \u00272016-07-01 10:47:00\u0027 -Path C:\\Temp\nExports all execution plans for databases db1 and db2 on sqlserver2014a since July 1, 2016 at 10:47 AM. Files saved in to C:\\Temp\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaExecutionPlan -SqlInstance sqlserver2014a | Export-DbaExecutionPlan -Path C:\\Temp\nGets all execution plans for sqlserver2014a. Using Pipeline exports them all to C:\\Temp\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaExecutionPlan -SqlInstance sqlserver2014a | Export-DbaExecutionPlan -Path C:\\Temp -WhatIf\nGets all execution plans for sqlserver2014a. Then shows what would happen if the results where piped to Export-DbaExecutionPlan",
        "Syntax":  "Export-DbaExecutionPlan [-Database \u003cObject[]\u003e] [-ExcludeDatabase \u003cObject[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nExport-DbaExecutionPlan -SqlInstance \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Database \u003cObject[]\u003e] [-ExcludeDatabase \u003cObject[]\u003e] -Path \u003cString\u003e [-SinceCreation \u003cDateTime\u003e] [-SinceLastExecution \u003cDateTime\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nExport-DbaExecutionPlan [-Database \u003cObject[]\u003e] [-ExcludeDatabase \u003cObject[]\u003e] -Path \u003cString\u003e -PipedObject \u003cObject[]\u003e [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Export-DbaInstance",
        "Description":  "Export-DbaInstance consolidates most of the export scripts in dbatools into one command.\n\nThis is useful when you\u0027re looking to Export entire instances. It less flexible than using the underlying functions.\nThink of it as an easy button. Unless an -Exclude is specified, it exports:\n\nAll database restore scripts.\nAll logins.\nAll database mail objects.\nAll credentials.\nAll objects within the Job Server (SQL Agent).\nAll linked servers.\nAll groups and servers within Central Management Server.\nAll SQL Server configuration objects (everything in sp_configure).\nAll user objects in system databases.\nAll system triggers.\nAll system backup devices.\nAll Audits.\nAll Endpoints.\nAll Extended Events.\nAll Policy Management objects.\nAll Resource Governor objects.\nAll Server Audit Specifications.\nAll Custom Errors (User Defined Messages).\nAll Server Roles.\nAll Availability Groups.",
        "Tags":  "Export",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instances",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Credential",
                           "Alternative Windows credentials for exporting Linked Servers and Credentials. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Path",
                           "The path to the export file",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "NoRecovery",
                           "If this switch is used, databases will be left in the No Recovery state to enable further backups to be added.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "IncludeDbMasterKey",
                           "Exports the db master key then logs into the server to copy it to the $Path",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Exclude",
                           "Exclude one or more objects to export\nDatabases\r\nLogins\r\nAgentServer\r\nCredentials\r\nLinkedServers\r\nSpConfigure\r\nCentralManagementServer\r\nDatabaseMail\r\nSysDbUserObjects\r\nSystemTriggers\r\nBackupDevices\r\nAudits\r\nEndpoints\r\nExtendedEvents\r\nPolicyManagement\r\nResourceGovernor\r\nServerAuditSpecifications\r\nCustomErrors\r\nServerRoles\r\nAvailabilityGroups\r\nReplicationSettings",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "BatchSeparator",
                           "Batch separator for scripting output. \"GO\" by default.",
                           "",
                           false,
                           "false",
                           "GO"
                       ],
                       [
                           "ScriptingOption",
                           "Add scripting options to scripting output for all objects except Registered Servers and Extended Events.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Exports SQL Server *ALL* database restore scripts, logins, database mail profiles/accounts, credentials, SQL Agent objects, linked servers,\nCentral Management Server objects, server configuration settings (sp_configure), user objects in systems databases,\nsystem triggers and backup devices from one SQL Server to another.\n\nFor more granular control, please use one of the -Exclude parameters and use the other functions available within the dbatools module.",
        "Name":  "Export-DbaInstance",
        "Links":  "https://dbatools.io/Export-DbaInstance",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eExport-DbaInstance -SqlInstance sqlserver\\instance\nAll databases, logins, job objects and sp_configure options will be exported from\r\nsqlserver\\instance to an automatically generated folder name in Documents.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eExport-DbaInstance -SqlInstance sqlcluster -Exclude Databases, Logins -Path C:\\dr\\sqlcluster\nExports everything but logins and database restore scripts to C:\\dr\\sqlcluster",
        "Syntax":  "Export-DbaInstance [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Credential] \u003cPSCredential\u003e] [[-Path] \u003cString\u003e] [-NoRecovery] [-IncludeDbMasterKey] [[-Exclude] \u003cString[]\u003e] [[-BatchSeparator] \u003cString\u003e] [[-ScriptingOption] \u003cScriptingOptions\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Export-DbaLinkedServer",
        "Description":  "Exports linked servers INCLUDING PASSWORDS, unless specified otherwise, to sql file.\n\nRequires remote Windows access if exporting the password.",
        "Tags":  "LinkedServer",
        "Params":  [
                       [
                           "SqlInstance",
                           "Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2005 or higher.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "LinkedServer",
                           "The linked server(s) to export. If unspecified, all linked servers will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative linked servers. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Credential",
                           "Login to the target OS using alternative linked servers. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Path",
                           "The path to the exported sql file.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludePassword",
                           "Exports the linked server without any sensitive information.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Append",
                           "Append to Path",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "InputObject",
                           "Allow credentials to be piped in from Get-DbaLinkedServer",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Exports linked servers INCLUDING PASSWORDS, unless specified otherwise, to sql file.",
        "Name":  "Export-DbaLinkedServer",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eExport-DbaLinkedServer -SqlInstance sql2017 -Path C:\\temp\\ls.sql\nExports the linked servers, including passwords, from sql2017 to the file C:\\temp\\ls.sql\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eExport-DbaLinkedServer -SqlInstance sql2017 -Path C:\\temp\\ls.sql -ExcludePassword\nExports the linked servers, without passwords, from sql2017 to the file C:\\temp\\ls.sql",
        "Syntax":  "Export-DbaLinkedServer [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-LinkedServer] \u003cString[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Credential] \u003cPSCredential\u003e] [[-Path] \u003cString\u003e] [-ExcludePassword] [-Append] [[-InputObject] \u003cLinkedServer[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Export-DbaLogin",
        "Description":  "Exports Windows and SQL Logins to a T-SQL file. Export includes login, SID, password, default database, default language, server permissions, server roles, db permissions, db roles.",
        "Tags":  [
                     "Export",
                     "Login"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. SQL Server 2000 and above supported.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Login",
                           "The login(s) to process. Options for this list are auto-populated from the server. If unspecified, all logins will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeLogin",
                           "The login(s) to exclude. Options for this list are auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Path",
                           "The file to write to.",
                           "OutFile,FilePath,FileName",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "NoClobber",
                           "If this switch is enabled, a file already existing at the path specified by Path will not be overwritten.",
                           "NoOverwrite",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Append",
                           "If this switch is enabled, content will be appended to a file already existing at the path specified by Path. If the file does not exist, it will be created.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "ExcludeDatabases",
                           "If this switch is enabled, mappings for databases will not be exported.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "ExcludeJobs",
                           "If this switch is enabled, Agent job ownership will not be exported.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "ExcludeGoBatchSeparator",
                           "If specified, will NOT script the \u0027GO\u0027 batch separator.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "DestinationVersion",
                           "To say to which version the script should be generated. If not specified will use instance major version.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Export-SqlLogin",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Exports Windows and SQL Logins to a T-SQL file. Export includes login, SID, password, default database, default language, server permissions, server roles, db permissions, db roles.",
        "Name":  "Export-DbaLogin",
        "Links":  "https://dbatools.io/Export-DbaLogin",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eExport-DbaLogin -SqlInstance sql2005 -Path C:\\temp\\sql2005-logins.sql\nExports the logins for SQL Server \"sql2005\" and writes them to the file \"C:\\temp\\sql2005-logins.sql\"\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eExport-DbaLogin -SqlInstance sqlserver2014a -ExcludeLogin realcajun -SqlCredential $scred -Path C:\\temp\\logins.sql -Append\nAuthenticates to sqlserver2014a using SQL Authentication. Exports all logins except for realcajun to C:\\temp\\logins.sql, and appends to the file if it exists. If not, the file will be created.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eExport-DbaLogin -SqlInstance sqlserver2014a -Login realcajun, netnerds -Path C:\\temp\\logins.sql\nExports ONLY logins netnerds and realcajun FROM sqlserver2014a to the file  C:\\temp\\logins.sql\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eExport-DbaLogin -SqlInstance sqlserver2014a -Login realcajun, netnerds -Database HR, Accounting\nExports ONLY logins netnerds and realcajun FROM sqlserver2014a with the permissions on databases HR and Accounting\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eExport-DbaLogin -SqlInstance sqlserver2008 -Login realcajun, netnerds -Path C:\\temp\\login.sql -ExcludeGoBatchSeparator\nExports ONLY logins netnerds and realcajun FROM sqlserver2008 server, to the C:\\temp\\login.sql file without the \u0027GO\u0027 batch separator.\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eExport-DbaLogin -SqlInstance sqlserver2008 -Login realcajun -Path C:\\temp\\users.sql -DestinationVersion SQLServer2016\nExports login realcajun from sqlserver2008 to the file C:\\temp\\users.sql with syntax to run on SQL Server 2016",
        "Syntax":  "Export-DbaLogin [-SqlInstance] \u003cDbaInstanceParameter\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Login] \u003cObject[]\u003e] [[-ExcludeLogin] \u003cObject[]\u003e] [[-Database] \u003cObject[]\u003e] [[-Path] \u003cString\u003e] [-NoClobber] [-Append] [-ExcludeDatabases] [-ExcludeJobs] [-EnableException] [-ExcludeGoBatchSeparator] [[-DestinationVersion] \u003cString\u003e] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Export-DbaPfDataCollectorSetTemplate",
        "Description":  "Exports a Data Collector Set XML Template from Get-DbaPfDataCollectorSet. Exports to \"$home\\Documents\\Performance Monitor Templates\" by default.",
        "Tags":  [
                     "Performance",
                     "DataCollector"
                 ],
        "Params":  [
                       [
                           "ComputerName",
                           "The target computer. Defaults to localhost.",
                           "",
                           false,
                           "false",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Allows you to login to $ComputerName using alternative credentials. To use:\n$cred = Get-Credential, then pass $cred object to the -Credential parameter.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "CollectorSet",
                           "The name of the collector set(s) to export.",
                           "DataCollectorSet",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Path",
                           "The path to export the file. Can be .xml or directory.",
                           "",
                           false,
                           "false",
                           "\"$home\\Documents\\Performance Monitor Templates\""
                       ],
                       [
                           "InputObject",
                           "Accepts the object output by Get-DbaPfDataCollectorSetTemplate via the pipeline.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Exports a new Data Collector Set XML Template.",
        "Name":  "Export-DbaPfDataCollectorSetTemplate",
        "Links":  "https://dbatools.io/Export-DbaPfDataCollectorSetTemplate",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eExport-DbaPfDataCollectorSetTemplate -ComputerName sql2017 -Path C:\\temp\\pf\nExports all data collector sets from to the C:\\temp\\pf folder.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaPfDataCollectorSet ComputerName sql2017 -CollectorSet \u0027System Correlation\u0027 | Export-DbaPfDataCollectorSetTemplate -Path C:\\temp\nExports the \u0027System Correlation\u0027 data collector set from sql2017 to C:\\temp.",
        "Syntax":  "Export-DbaPfDataCollectorSetTemplate [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [[-CollectorSet] \u003cString[]\u003e] [[-Path] \u003cString\u003e] [[-InputObject] \u003cObject[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Export-DbaRepServerSetting",
        "Description":  "Exports replication server settings to file.",
        "Tags":  "Replication",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances",
                           "ServerInstance,SqlServer",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Path",
                           "Specifies the path to a file which will contain the output.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ScriptOption",
                           "Not real sure how to use this yet",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Allows piping from Get-DbaRepServer",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Encoding",
                           "Specifies the file encoding. The default is UTF8.\nValid values are:\r\n-- ASCII: Uses the encoding for the ASCII (7-bit) character set.\r\n-- BigEndianUnicode: Encodes in UTF-16 format using the big-endian byte order.\r\n-- Byte: Encodes a set of characters into a sequence of bytes.\r\n-- String: Uses the encoding type for a string.\r\n-- Unicode: Encodes in UTF-16 format using the little-endian byte order.\r\n-- UTF7: Encodes in UTF-7 format.\r\n-- UTF8: Encodes in UTF-8 format.\r\n-- Unknown: The encoding type is unknown or invalid. The data can be treated as binary.",
                           "",
                           false,
                           "false",
                           "UTF8"
                       ],
                       [
                           "Passthru",
                           "Output script to console",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "NoClobber",
                           "Do not overwrite file",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Append",
                           "Append to file",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Exports replication server settings to file.",
        "Name":  "Export-DbaRepServerSetting",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eExport-DbaRepServerSetting -SqlInstance sql2017 -Path C:\\temp\\replication.sql\nExports the replication settings on sql2017 to the file C:\\temp\\replication.sql\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaRepServer -SqlInstance sql2017 | Export-DbaRepServerSettings -Path C:\\temp\\replication.sql\nExports the replication settings on sql2017 to the file C:\\temp\\replication.sql",
        "Syntax":  "Export-DbaRepServerSetting [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Path] \u003cString\u003e] [[-ScriptOption] \u003cObject[]\u003e] [[-InputObject] \u003cReplicationServer[]\u003e] [[-Encoding] \u003cString\u003e] [-Passthru] [-NoClobber] [-Append] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Export-DbaScript",
        "Description":  "Exports scripts from SQL Management Objects",
        "Tags":  [
                     "Migration",
                     "Backup",
                     "Export"
                 ],
        "Params":  [
                       [
                           "InputObject",
                           "A SQL Management Object such as the one returned from Get-DbaLogin",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "ScriptingOptionsObject",
                           "An SMO Scripting Object that can be used to customize the output - see New-DbaScriptingOption",
                           "ScriptingOptionObject",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Path",
                           "The output filename and location. If no path is specified, one will be created. If the file already exists, the output will be appended.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Encoding",
                           "Specifies the file encoding. The default is UTF8.\nValid values are:\r\n-- ASCII: Uses the encoding for the ASCII (7-bit) character set.\r\n-- BigEndianUnicode: Encodes in UTF-16 format using the big-endian byte order.\r\n-- Byte: Encodes a set of characters into a sequence of bytes.\r\n-- String: Uses the encoding type for a string.\r\n-- Unicode: Encodes in UTF-16 format using the little-endian byte order.\r\n-- UTF7: Encodes in UTF-7 format.\r\n-- UTF8: Encodes in UTF-8 format.\r\n-- Unknown: The encoding type is unknown or invalid. The data can be treated as binary.",
                           "",
                           false,
                           "false",
                           "UTF8"
                       ],
                       [
                           "BatchSeparator",
                           "Specifies the Batch Separator to use. Default is None",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "NoPrefix",
                           "Do not include a Prefix",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Passthru",
                           "Output script to console",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "NoClobber",
                           "Do not overwrite file",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Append",
                           "Append to file",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Exports scripts from SQL Management Objects (SMO)",
        "Name":  "Export-DbaScript",
        "Links":  "https://dbatools.io/Export-DbaScript",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaAgentJob -SqlInstance sql2016 | Export-DbaScript\nExports all jobs on the SQL Server sql2016 instance using a trusted connection - automatically determines filename as .\\sql2016-Job-Export-date.sql\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaAgentJob -SqlInstance sql2016 | Export-DbaScript -Path C:\\temp\\export.sql -Append\nExports all jobs on the SQL Server sql2016 instance using a trusted connection - Will append the output to the file C:\\temp\\export.sql if it already exists\r\nScript does not include Batch Separator and will not compile\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaDbTable -SqlInstance sql2016 -Database MyDatabase -Table \u0027dbo.Table1\u0027, \u0027dbo.Table2\u0027 -SqlCredential sqladmin | Export-DbaScript -Path C:\\temp\\export.sql\nExports only script for \u0027dbo.Table1\u0027 and \u0027dbo.Table2\u0027 in MyDatabase to C:temp\\export.sql and uses the SQL login \"sqladmin\" to login to sql2016\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaAgentJob -SqlInstance sql2016 -Job syspolicy_purge_history, \u0027Hourly Log Backups\u0027 -SqlCredential sqladmin | Export-DbaScript -Path C:\\temp\\export.sql -NoPrefix\nExports only syspolicy_purge_history and \u0027Hourly Log Backups\u0027 to C:temp\\export.sql and uses the SQL login \"sqladmin\" to login to sql2016\r\nSuppress the output of a Prefix\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003e$options = New-DbaScriptingOption\nPS C:\\\u003e $options.ScriptSchema = $true\r\nPS C:\\\u003e $options.IncludeDatabaseContext  = $true\r\nPS C:\\\u003e $options.IncludeHeaders = $false\r\nPS C:\\\u003e $Options.NoCommandTerminator = $false\r\nPS C:\\\u003e $Options.ScriptBatchTerminator = $true\r\nPS C:\\\u003e $Options.AnsiFile = $true\r\nPS C:\\\u003e Get-DbaAgentJob -SqlInstance sql2016 -Job syspolicy_purge_history, \u0027Hourly Log Backups\u0027 -SqlCredential sqladmin | Export-DbaScript -Path C:\\temp\\export.sql -ScriptingOptionsObject $options\nExports only syspolicy_purge_history and \u0027Hourly Log Backups\u0027 to C:temp\\export.sql and uses the SQL login \"sqladmin\" to login to sql2016\r\nAppends a batch separator at end of each script.\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eGet-DbaAgentJob -SqlInstance sql2014 | Export-DbaScript -Passthru | ForEach-Object { $_.Replace(\u0027sql2014\u0027,\u0027sql2016\u0027) } | Set-Content -Path C:\\temp\\export.sql\nExports jobs and replaces all instances of the servername \"sql2014\" with \"sql2016\" then writes to C:\\temp\\export.sql\n-------------------------- EXAMPLE 7 --------------------------\nPS C:\\\u003e$options = New-DbaScriptingOption\nPS C:\\\u003e $options.ScriptSchema = $true\r\nPS C:\\\u003e $options.IncludeDatabaseContext  = $true\r\nPS C:\\\u003e $options.IncludeHeaders = $false\r\nPS C:\\\u003e $Options.NoCommandTerminator = $false\r\nPS C:\\\u003e $Options.ScriptBatchTerminator = $true\r\nPS C:\\\u003e $Options.AnsiFile = $true\r\nPS C:\\\u003e $Databases = Get-DbaDatabase -SqlInstance sql2016 -ExcludeDatabase master, model, msdb, tempdb\r\nPS C:\\\u003e foreach ($db in $Databases) {\r\n\u003e\u003e        Export-DbaScript -InputObject $db -Path C:\\temp\\export.sql -Append -Encoding UTF8 -ScriptingOptionsObject $options -NoPrefix\r\n\u003e\u003e }\nExports Script for each database on sql2016 excluding system databases\r\nUses Scripting options to ensure Batch Terminator is set\r\nWill append the output to the file C:\\temp\\export.sql if it already exists",
        "Syntax":  "Export-DbaScript [-InputObject] \u003cObject[]\u003e [[-ScriptingOptionsObject] \u003cScriptingOptions\u003e] [[-Path] \u003cString\u003e] [[-Encoding] \u003cString\u003e] [[-BatchSeparator] \u003cString\u003e] [-NoPrefix] [-Passthru] [-NoClobber] [-Append] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Export-DbaSpConfigure",
        "Description":  "Exports advanced sp_configure global configuration options to sql file.",
        "Tags":  [
                     "SpConfig",
                     "Configure",
                     "Configuration"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input.\r\nYou must have sysadmin access if needs to set \u0027show advanced options\u0027 to 1 and server version must be SQL Server version 2005 or higher.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Path",
                           "Specifies the path to a file which will contain the sp_configure queries necessary to replicate the configuration settings on another instance. This file is suitable for input into \r\nImport-DbaSPConfigure.\r\nIf not specified will output to My Documents folder with default name of ServerName-MMDDYYYYhhmmss-sp_configure.sql\r\nIf a directory is passed then uses default name of ServerName-MMDDYYYYhhmmss-sp_configure.sql",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Export-SqlSpConfigure",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Exports advanced sp_configure global configuration options to sql file.",
        "Name":  "Export-DbaSpConfigure",
        "Links":  "https://dbatools.io/Export-DbaSpConfigure",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eExport-DbaSpConfigure -SqlInstance sourceserver\nExports the SPConfigure settings on sourceserver. As no Path was defined outputs to My Documents folder with default name format of Servername-MMDDYYYYhhmmss-sp_configure.sql\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eExport-DbaSpConfigure -SqlInstance sourceserver -Path C:\\temp\nExports the SPConfigure settings on sourceserver to the directory C:\\temp using the default name format\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003e$cred = Get-Credential sqladmin\nPS C:\\\u003e Export-DbaSpConfigure -SqlInstance sourceserver -SqlCredential $cred -Path C:\\temp\\sp_configure.sql\nExports the SPConfigure settings on sourceserver to the file C:\\temp\\sp_configure.sql. Uses SQL Authentication to connect. Will require SysAdmin rights if needs to set \u0027show advanced options\u0027\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003e\u0027Server1\u0027, \u0027Server2\u0027 | Export-DbaSpConfigure -Path C:\\temp\\configure.sql\nExports the SPConfigure settings for Server1 and Server2 using pipeline. As more than 1 Server adds prefix of Servername and date to the file name and saves to file like  \r\nC:\\temp\\Servername-MMDDYYYYhhmmss-configure.sql",
        "Syntax":  "Export-DbaSpConfigure [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Path] \u003cString\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Export-DbatoolsConfig",
        "Description":  "Exports configuration items to a Json file.",
        "Params":  [
                       [
                           "FullName",
                           "Select the configuration objects to export by filtering by their full name.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "Module",
                           "Select the configuration objects to export by filtering by their module name.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "Name",
                           "Select the configuration objects to export by filtering by their name.",
                           "",
                           false,
                           "false",
                           "*"
                       ],
                       [
                           "Config",
                           "The configuration object(s) to export.\r\nReturned by Get-DbatoolsConfig.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "ModuleName",
                           "Exports all configuration pertinent to a module to a predefined path.\r\nExported configuration items include all settings marked as \u0027ModuleExport\u0027 that have been changed from the default value.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "ModuleVersion",
                           "The configuration version of the module-settings to write.",
                           "",
                           false,
                           "false",
                           "1"
                       ],
                       [
                           "Scope",
                           "Which predefined path to write module specific settings to.\r\nOnly file scopes are considered.\r\nBy default it writes to the suer profile.",
                           "",
                           false,
                           "false",
                           "FileUserShared"
                       ],
                       [
                           "OutPath",
                           "The path (filename included) to export to.\r\nWill fail if the folder does not exist, will overwrite the file if it exists.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SkipUnchanged",
                           "If set, configuration objects whose value was not changed from its original value will not be exported.\r\n(Note: Settings that were updated with the same value as the original default will still be considered changed)",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "This parameters disables user-friendly warnings and enables the throwing of exceptions.\r\nThis is less user friendly, but allows catching exceptions in calling scripts.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Synopsis":  "Exports configuration items to a Json file.",
        "Name":  "Export-DbatoolsConfig",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbatoolsConfig | Export-DbatoolsConfig -OutPath \u0027~/export.json\u0027\nExports all current settings to json.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eExport-DbatoolsConfig -Module message -OutPath \u0027~/export.json\u0027 -SkipUnchanged\nExports all settings of the module \u0027message\u0027 that are no longer the original default values to json.",
        "Syntax":  "Export-DbatoolsConfig [-FullName] \u003cString\u003e [-OutPath] \u003cString\u003e [-SkipUnchanged] [-EnableException] [\u003cCommonParameters\u003e]\nExport-DbatoolsConfig [-Module] \u003cString\u003e [[-Name] \u003cString\u003e] [-OutPath] \u003cString\u003e [-SkipUnchanged] [-EnableException] [\u003cCommonParameters\u003e]\nExport-DbatoolsConfig [-Config] \u003cConfig[]\u003e [-OutPath] \u003cString\u003e [-SkipUnchanged] [-EnableException] [\u003cCommonParameters\u003e]\nExport-DbatoolsConfig -ModuleName \u003cString\u003e [-ModuleVersion \u003cInt32\u003e] [-Scope {UserDefault | UserMandatory | SystemDefault | SystemMandatory | FileUserLocal | FileUserShared | FileSystem}] [-SkipUnchanged] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Export-DbaUser",
        "Description":  "Exports users creation and its permissions to a T-SQL file or host. Export includes user, create and add to role(s), database level permissions, object level permissions.",
        "Tags":  [
                     "User",
                     "Export"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. SQL Server 2000 and above supported.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to login to servers using alternative credentials\n$scred = Get-Credential, then pass $scred object to the -SqlCredential parameter\nWindows Authentication will be used if SqlCredential is not specified",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "User",
                           "Export only the specified database user(s). If not specified will export all users from the database(s)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "DestinationVersion",
                           "To say to which version the script should be generated. If not specified will use database compatibility level",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Path",
                           "Specifies the full path of a file to write the script to.",
                           "OutFile,FilePath,FileName",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "NoClobber",
                           "Do not overwrite file",
                           "NoOverwrite",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Append",
                           "Append to file",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "ScriptingOptionsObject",
                           "A Microsoft.SqlServer.Management.Smo.ScriptingOptions object with the options that you want to use to generate the t-sql script.\r\nYou can use the NEw-DbaScriptingOption to generate it.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeGoBatchSeparator",
                           "If specified, will NOT script the \u0027GO\u0027 batch separator.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Export-SqlUser",
        "Author":  "Claudio Silva (@ClaudioESSilva)",
        "Synopsis":  "Exports users creation and its permissions to a T-SQL file or host.",
        "Name":  "Export-DbaUser",
        "Links":  "https://dbatools.io/Export-DbaUser",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eExport-DbaUser -SqlInstance sql2005 -Path C:\\temp\\sql2005-users.sql\nExports SQL for the users in server \"sql2005\" and writes them to the file \"C:\\temp\\sql2005-users.sql\"\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eExport-DbaUser -SqlInstance sqlserver2014a $scred -Path C:\\temp\\users.sql -Append\nAuthenticates to sqlserver2014a using SQL Authentication. Exports all users to C:\\temp\\users.sql, and appends to the file if it exists. If not, the file will be created.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eExport-DbaUser -SqlInstance sqlserver2014a -User User1, User2 -Path C:\\temp\\users.sql\nExports ONLY users User1 and User2 from sqlserver2014a to the file  C:\\temp\\users.sql\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eExport-DbaUser -SqlInstance sqlserver2008 -User User1 -Path C:\\temp\\users.sql -DestinationVersion SQLServer2016\nExports user User1 from sqlserver2008 to the file C:\\temp\\users.sql with syntax to run on SQL Server 2016\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eExport-DbaUser -SqlInstance sqlserver2008 -Database db1,db2 -Path C:\\temp\\users.sql\nExports ONLY users from db1 and db2 database on sqlserver2008 server, to the C:\\temp\\users.sql file.\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003e$options = New-DbaScriptingOption\nPS C:\\\u003e $options.ScriptDrops = $false\r\nPS C:\\\u003e $options.WithDependencies = $true\r\nPS C:\\\u003e Export-DbaUser -SqlInstance sqlserver2008 -Database db1,db2 -Path C:\\temp\\users.sql -ScriptingOptionsObject $options\nExports ONLY users from db1 and db2 database on sqlserver2008 server, to the C:\\temp\\users.sql file.\r\nIt will not script drops but will script dependencies.\n-------------------------- EXAMPLE 7 --------------------------\nPS C:\\\u003eExport-DbaUser -SqlInstance sqlserver2008 -Database db1,db2 -Path C:\\temp\\users.sql -ExcludeGoBatchSeparator\nExports ONLY users from db1 and db2 database on sqlserver2008 server, to the C:\\temp\\users.sql file without the \u0027GO\u0027 batch separator.",
        "Syntax":  "Export-DbaUser [-SqlInstance] \u003cDbaInstanceParameter\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [[-User] \u003cObject[]\u003e] [[-DestinationVersion] \u003cString\u003e] [[-Path] \u003cString\u003e] [-NoClobber] [-Append] [-EnableException] [[-ScriptingOptionsObject] \u003cScriptingOptions\u003e] [-ExcludeGoBatchSeparator] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Export-DbaXECsv",
        "Description":  "Exports Extended Events to a CSV file.",
        "Tags":  [
                     "ExtendedEvent",
                     "XE",
                     "XEvent"
                 ],
        "Params":  [
                       [
                           "InputObject",
                           "Allows Piping",
                           "FullName",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Path",
                           "Specifies the InputObject to the output CSV file",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Gianluca Sartori (@spaghettidba)",
        "Synopsis":  "Exports Extended Events to a CSV file.",
        "Name":  "Export-DbaXECsv",
        "Links":  "https://dbatools.io/Export-DbaXECsv",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-ChildItem -Path C:\\temp\\sample.xel | Export-DbaXECsv -Path c:\\temp\\sample.csv\nWrites Extended Events data to the file \"C:\\temp\\events.csv\".\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaXESession -SqlInstance sql2014 -Session deadlocks | Export-DbaXECsv -Path c:\\temp\\events.csv\nWrites Extended Events data to the file \"C:\\temp\\events.csv\".",
        "Syntax":  "Export-DbaXECsv [-InputObject] \u003cObject[]\u003e [-Path] \u003cString\u003e [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Export-DbaXESessionTemplate",
        "Description":  "Exports an XESession XML Template either from the Target SQL Server or XE Session(s) output by Get-DbaXESession. Exports to \"$home\\Documents\\SQL Server Management Studio\\Templates\\XEventTemplates\" by default",
        "Tags":  [
                     "ExtendedEvent",
                     "XE",
                     "XEvent"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2008 or higher.",
                           "ServerInstance,SqlServer",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Session",
                           "The Name of the session(s) to export.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Path",
                           "The path to export the file into. Can be .xml or directory.",
                           "",
                           false,
                           "false",
                           "\"$home\\Documents\\SQL Server Management Studio\\Templates\\XEventTemplates\""
                       ],
                       [
                           "InputObject",
                           "Specifies an XE Session output by Get-DbaXESession.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Exports an XESession XML Template using XE Session(s) output by Get-DbaXESession",
        "Name":  "Export-DbaXESessionTemplate",
        "Links":  "https://dbatools.io/Export-DbaXESessionTemplate",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eExport-DbaXESessionTemplate -SqlInstance sql2017 -Path C:\\temp\\xe\nExports an XESession XML Template for all Extended Event Sessions on sql2017 to the C:\\temp\\xe folder.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaXESession -SqlInstance sql2017 -Session system_health | Export-DbaXESessionTemplate -Path C:\\temp\\xe\nGets the system_health Extended Events Session from sql2017 and then exports as an XESession XML Template to C:\\temp\\xe",
        "Syntax":  "Export-DbaXESessionTemplate [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Session] \u003cObject[]\u003e] [[-Path] \u003cString\u003e] [[-InputObject] \u003cSession[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Find-DbaAgentJob",
        "Description":  "This command filters SQL Agent jobs giving the DBA a list of jobs that may need attention or could possibly be options for removal.",
        "Tags":  [
                     "Agent",
                     "Job"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2000 or higher.",
                           "ServerInstance,SqlServer,SqlServers",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to login to servers using SQL Logins as opposed to Windows Auth/Integrated/Trusted.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "JobName",
                           "Filter agent jobs to only the name(s) you list.\r\nSupports regular expression (e.g. MyJob*) being passed in.",
                           "Name",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeJobName",
                           "Allows you to enter an array of agent job names to ignore",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "StepName",
                           "Filter based on StepName.\r\nSupports regular expression (e.g. MyJob*) being passed in.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "LastUsed",
                           "Find all jobs that havent ran in the INT number of previous day(s)",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "IsDisabled",
                           "Find all jobs that are disabled",
                           "Disabled",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "IsFailed",
                           "Find all jobs that have failed",
                           "Failed",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "IsNotScheduled",
                           "Find all jobs with no schedule assigned",
                           "NoSchedule",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "IsNoEmailNotification",
                           "Find all jobs without email notification configured",
                           "NoEmailNotification",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Category",
                           "Filter based on agent job categories",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Owner",
                           "Filter based on owner of the job/s",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Since",
                           "Datetime object used to narrow the results to a date",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Stephen Bennett (https://sqlnotesfromtheunderground.wordpress.com/)",
        "Synopsis":  "Find-DbaAgentJob finds agent jobs that fit certain search filters.",
        "Name":  "Find-DbaAgentJob",
        "Links":  "https://dbatools.io/Find-DbaAgentJob",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eFind-DbaAgentJob -SqlInstance Dev01 -JobName *backup*\nReturns all agent job(s) that have backup in the name\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eFind-DbaAgentJob -SqlInstance Dev01, Dev02 -JobName Mybackup\nReturns all agent job(s) that are named exactly Mybackup\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eFind-DbaAgentJob -SqlInstance Dev01 -LastUsed 10\nReturns all agent job(s) that have not ran in 10 days\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eFind-DbaAgentJob -SqlInstance Dev01 -IsDisabled -IsNoEmailNotification -IsNotScheduled\nReturns all agent job(s) that are either disabled, have no email notification or don\u0027t have a schedule. returned with detail\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003e$servers | Find-DbaAgentJob -IsFailed | Start-DbaAgentJob\nFinds all failed job then starts them. Consider using a -WhatIf at the end of Start-DbaAgentJob to see what it\u0027ll do first\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eFind-DbaAgentJob -SqlInstance Dev01 -LastUsed 10 -Exclude \"Yearly - RollUp Workload\", \"SMS - Notification\"\nReturns all agent jobs that have not ran in the last 10 days ignoring jobs \"Yearly - RollUp Workload\" and \"SMS - Notification\"\n-------------------------- EXAMPLE 7 --------------------------\nPS C:\\\u003eFind-DbaAgentJob -SqlInstance Dev01 -Category \"REPL-Distribution\", \"REPL-Snapshot\" | Format-Table -AutoSize -Wrap\nReturns all job/s on Dev01 that are in either category \"REPL-Distribution\" or \"REPL-Snapshot\"\n-------------------------- EXAMPLE 8 --------------------------\nPS C:\\\u003eFind-DbaAgentJob -SqlInstance Dev01, Dev02 -IsFailed -Since \u00272016-07-01 10:47:00\u0027\nReturns all agent job(s) on Dev01 and Dev02 that have failed since July of 2016 (and still have history in msdb)\n-------------------------- EXAMPLE 9 --------------------------\nPS C:\\\u003eGet-DbaCmsRegServer -SqlInstance CMSServer -Group Production | Find-DbaAgentJob -Disabled -IsNotScheduled | Format-Table -AutoSize -Wrap\nQueries CMS server to return all SQL instances in the Production folder and then list out all agent jobs that have either been disabled or have no schedule.",
        "Syntax":  "Find-DbaAgentJob [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-JobName \u003cString[]\u003e] [-ExcludeJobName \u003cString[]\u003e] [-StepName \u003cString[]\u003e] [-LastUsed \u003cInt32\u003e] [-IsDisabled] [-IsFailed] [-IsNotScheduled] [-IsNoEmailNotification] [-Category \u003cString[]\u003e] [-Owner \u003cString\u003e] [-Since \u003cDateTime\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Find-DbaBackup",
        "Description":  "Provides all of the same functionality for finding SQL backups to remove from disk as a standard maintenance plan would.\n\nAs an addition you have the ability to check the Archive bit on files before deletion. This will allow you to ensure backups have been archived to your archive location before removal.",
        "Tags":  "Backup",
        "Params":  [
                       [
                           "Path",
                           "Specifies the name of the base level folder to search for backup files.",
                           "BackupFolder",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "BackupFileExtension",
                           "Specifies the filename extension of the backup files you wish to find (typically \u0027bak\u0027, \u0027trn\u0027 or \u0027log\u0027). Do not include the period.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "RetentionPeriod",
                           "Specifies the retention period for backup files. Correct format is ##U.\n## is the retention value and must be an integer value\r\nU signifies the units where the valid units are:\r\nh = hours\r\nd = days\r\nw = weeks\r\nm = months\nFormatting Examples:\r\n\u002748h\u0027 = 48 hours\r\n\u00277d\u0027 = 7 days\r\n\u00274w\u0027 = 4 weeks\r\n\u00271m\u0027 = 1 month",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "CheckArchiveBit",
                           "If this switch is enabled, the filesystem Archive bit is checked.\r\nIf this bit is set (which translates to \"it has not been backed up to another location yet\"), the file won\u0027t be included.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chris Sommer (@cjsommer), www.cjsommer.com",
        "Synopsis":  "Finds SQL Server backups on disk.",
        "Name":  "Find-DbaBackup",
        "Links":  "https://dbatools.io/Find-DbaBackup",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eFind-DbaBackup -Path \u0027C:\\MSSQL\\SQL Backup\\\u0027 -BackupFileExtension trn -RetentionPeriod 48h\nSearches for all trn files in C:\\MSSQL\\SQL Backup\\ and all subdirectories that are more than 48 hours old will be included.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eFind-DbaBackup -Path \u0027C:\\MSSQL\\Backup\\\u0027 -BackupFileExtension bak -RetentionPeriod 7d -CheckArchiveBit\nSearches for all bak files in C:\\MSSQL\\Backup\\ and all subdirectories that are more than 7 days old will be included, but only if the files have been backed up to another location as verified by \r\nchecking the Archive bit.",
        "Syntax":  "Find-DbaBackup [-Path] \u003cString\u003e [-BackupFileExtension] \u003cString\u003e [-RetentionPeriod] \u003cString\u003e [-CheckArchiveBit] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Find-DbaCommand",
        "Description":  "Finds dbatools commands searching through the inline help text, building a consolidated json index and querying it because Get-Help is too slow",
        "Tags":  [
                     "Find",
                     "Help",
                     "Command"
                 ],
        "Params":  [
                       [
                           "Pattern",
                           "Searches help for all commands in dbatools for the specified pattern and displays all results",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Tag",
                           "Finds all commands tagged with this auto-populated tag",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Author",
                           "Finds all commands tagged with this author",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "MinimumVersion",
                           "Finds all commands tagged with this auto-populated minimum version",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "MaximumVersion",
                           "Finds all commands tagged with this auto-populated maximum version",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Rebuild",
                           "Rebuilds the index",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Displays what would happen if the command is run",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Confirms overwrite of index",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Simone Bizzotto (@niphold)",
        "Synopsis":  "Finds dbatools commands searching through the inline help text",
        "Name":  "Find-DbaCommand",
        "Links":  "https://dbatools.io/Find-DbaCommand",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eFind-DbaCommand \"snapshot\"\nFor lazy typers: finds all commands searching the entire help for \"snapshot\"\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eFind-DbaCommand -Pattern \"snapshot\"\nFor rigorous typers: finds all commands searching the entire help for \"snapshot\"\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eFind-DbaCommand -Tag copy\nFinds all commands tagged with \"copy\"\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eFind-DbaCommand -Tag copy,user\nFinds all commands tagged with BOTH \"copy\" and \"user\"\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eFind-DbaCommand -Author chrissy\nFinds every command whose author contains our beloved \"chrissy\"\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eFind-DbaCommand -Author chrissy -Tag copy\nFinds every command whose author contains our beloved \"chrissy\" and it tagged as \"copy\"\n-------------------------- EXAMPLE 7 --------------------------\nPS C:\\\u003eFind-DbaCommand -Pattern snapshot -Rebuild\nFinds all commands searching the entire help for \"snapshot\", rebuilding the index (good for developers)",
        "Syntax":  "Find-DbaCommand [[-Pattern] \u003cString\u003e] [[-Tag] \u003cString[]\u003e] [[-Author] \u003cString\u003e] [[-MinimumVersion] \u003cString\u003e] [[-MaximumVersion] \u003cString\u003e] [-Rebuild] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Find-DbaDatabase",
        "Description":  "Allows you to search SQL Server instances for database that have either the same name, owner or service broker guid.\n\nThere a several reasons for the service broker guid not matching on a restored database primarily using alter database new broker. or turn off broker to return a guid of 0000-0000-0000-0000.",
        "Tags":  "Database",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Credential object used to connect to the SQL Server as a different user",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Property",
                           "What you would like to search on. Either Database Name, Owner, or Service Broker GUID. Database name is the default.",
                           "",
                           false,
                           "false",
                           "Name"
                       ],
                       [
                           "Pattern",
                           "Value that is searched for. This is a regular expression match but you can just use a plain ol string like \u0027dbareports\u0027",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "Exact",
                           "Search for an exact match instead of a pattern",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Detailed",
                           "Output all properties, will be depreciated in 1.0.0 release.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Stephen Bennett, https://sqlnotesfromtheunderground.wordpress.com/",
        "Synopsis":  "Find database/s on multiple servers that match criteria you input",
        "Name":  "Find-DbaDatabase",
        "Links":  "https://dbatools.io/Find-DbaDatabase",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eFind-DbaDatabase -SqlInstance \"DEV01\", \"DEV02\", \"UAT01\", \"UAT02\", \"PROD01\", \"PROD02\" -Pattern Report\nReturns all database from the SqlInstances that have a database with Report in the name\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eFind-DbaDatabase -SqlInstance \"DEV01\", \"DEV02\", \"UAT01\", \"UAT02\", \"PROD01\", \"PROD02\" -Pattern TestDB -Exact | Select-Object *\nReturns all database from the SqlInstances that have a database named TestDB with a detailed output.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eFind-DbaDatabase -SqlInstance \"DEV01\", \"DEV02\", \"UAT01\", \"UAT02\", \"PROD01\", \"PROD02\" -Property ServiceBrokerGuid -Pattern \u0027-faeb-495a-9898-f25a782835f5\u0027 | Select-Object *\nReturns all database from the SqlInstances that have the same Service Broker GUID with a detailed output",
        "Syntax":  "Find-DbaDatabase [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Property] \u003cString\u003e] [-Pattern] \u003cString\u003e [-Exact] [-Detailed] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Find-DbaDbGrowthEvent",
        "Description":  "Finds any database AutoGrow events in the Default Trace.\n\nThe following events are included:\n92 - Data File Auto Grow\n93 - Log File Auto Grow\n94 - Data File Auto Shrink\n95 - Log File Auto Shrink",
        "Tags":  [
                     "AutoGrow",
                     "Growth",
                     "Database"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EventType",
                           "Provide a filter on growth event type to filter the results.\nAllowed values: Growth, Shrink",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "FileType",
                           "Provide a filter on file type to filter the results.\nAllowed values: Data, Log",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "UseLocalTime",
                           "Return the local time of the instance instead of converting to UTC.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Find-DbaDatabaseGrowthEvent",
        "Author":  "Aaron Nelson",
        "Synopsis":  "Finds any database AutoGrow events in the Default Trace.",
        "Name":  "Find-DbaDbGrowthEvent",
        "Links":  "https://dbatools.io/Find-DbaDatabaseGrowthEvent",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eFind-DbaDatabaseGrowthEvent -SqlInstance localhost\nReturns any database AutoGrow events in the Default Trace with UTC time for the instance for every database on the localhost instance.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eFind-DbaDatabaseGrowthEvent -SqlInstance localhost -UseLocalTime\nReturns any database AutoGrow events in the Default Trace with the local time of the instance for every database on the localhost instance.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eFind-DbaDatabaseGrowthEvent -SqlInstance ServerA\\SQL2016, ServerA\\SQL2014\nReturns any database AutoGrow events in the Default Traces for every database on ServerA\\sql2016 \u0026 ServerA\\SQL2014.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eFind-DbaDatabaseGrowthEvent -SqlInstance ServerA\\SQL2016 | Format-Table -AutoSize -Wrap\nReturns any database AutoGrow events in the Default Trace for every database on the ServerA\\SQL2016 instance in a table format.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eFind-DbaDatabaseGrowthEvent -SqlInstance ServerA\\SQL2016 -EventType Shrink\nReturns any database Auto Shrink events in the Default Trace for every database on the ServerA\\SQL2016 instance.\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eFind-DbaDatabaseGrowthEvent -SqlInstance ServerA\\SQL2016 -EventType Growth -FileType Data\nReturns any database Auto Growth events on data files in the Default Trace for every database on the ServerA\\SQL2016 instance.",
        "Syntax":  "Find-DbaDbGrowthEvent [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [[-EventType] \u003cString\u003e] [[-FileType] \u003cString\u003e] [-UseLocalTime] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Find-DbaDbUnusedIndex",
        "Description":  "This command will help you to find Unused indexes on a database or a list of databases\n\nFor now only supported for CLUSTERED and NONCLUSTERED indexes",
        "Tags":  "Index",
        "Params":  [
                       [
                           "SqlInstance",
                           "The SQL Server you want to check for unused indexes.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "Specifies the database(s) to exclude from processing. Options for this list are auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "IgnoreUptime",
                           "Less than 7 days uptime can mean that analysis of unused indexes is unreliable, and normally no results will be returned. By setting this option results will be returned even if the Instance has been \r\nrunning for less that 7 days.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "InputObject",
                           "Enables piping from Get-DbaDatabase",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Find-SqlUnusedIndex",
        "Author":  "Aaron Nelson (@SQLvariant), SQLvariant.com",
        "Synopsis":  "Find unused indexes",
        "Name":  "Find-DbaDbUnusedIndex",
        "Links":  "https://dbatools.io/Find-DbaDbUnusedIndex",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eFind-DbaDbUnusedIndex -SqlInstance sql2016 -Database db1, db2\nFinds unused databases on db1 and db2 on sql2016\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eFind-DbaDbUnusedIndex -SqlInstance sql2016 -SqlCredential $cred\nFinds unused databases on db1 and db2 on sql2016 using SQL Authentication to connect to the server\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaDatabase -SqlInstance sql2016 | Find-DbaDbUnusedIndex\nFinds unused databases on all databases on sql2016",
        "Syntax":  "Find-DbaDbUnusedIndex [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [-IgnoreUptime] [[-InputObject] \u003cDatabase[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Find-DbaDisabledIndex",
        "Description":  "This command will help you to find disabled indexes on a database or a list of databases.",
        "Tags":  "Index",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "Specifies the database(s) to exclude from processing. Options for this list are auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "NoClobber",
                           "If this switch is enabled, the output file will not be overwritten.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Append",
                           "If this switch is enabled, content will be appended to the output file.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Jason Squires, sqlnotnull.com",
        "Synopsis":  "Find Disabled indexes",
        "Name":  "Find-DbaDisabledIndex",
        "Links":  "https://dbatools.io/Find-DbadisabledIndex",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eFind-DbaDisabledIndex -SqlInstance sql2005\nGenerates the SQL statements to drop the selected disabled indexes on server \"sql2005\".\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eFind-DbaDisabledIndex -SqlInstance sqlserver2016 -SqlCredential $cred\nGenerates the SQL statements to drop the selected disabled indexes on server \"sqlserver2016\", using SQL Authentication to connect to the database.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eFind-DbaDisabledIndex -SqlInstance sqlserver2016 -Database db1, db2\nGenerates the SQL Statement to drop selected indexes in databases db1 \u0026 db2 on server \"sqlserver2016\".\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eFind-DbaDisabledIndex -SqlInstance sqlserver2016\nGenerates the SQL statements to drop selected indexes on all user databases.",
        "Syntax":  "Find-DbaDisabledIndex [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [-NoClobber] [-Append] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Find-DbaDuplicateIndex",
        "Description":  "This command will help you to find duplicate and overlapping indexes on a database or a list of databases.\n\nOn SQL Server 2008 and higher, the IsFiltered property will also be checked\n\nOnly supports CLUSTERED and NONCLUSTERED indexes.\n\nOutput:\nTableName\nIndexName\nKeyColumns\nIncludedColumns\nIndexSizeMB\nIndexType\nCompressionDescription (When 2008+)\n[RowCount]\nIsDisabled\nIsFiltered (When 2008+)",
        "Tags":  "Index",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "IncludeOverlapping",
                           "If this switch is enabled, indexes which are partially duplicated will be returned.\nExample: If the first key column is the same between two indexes, but one has included columns and the other not, this will be shown.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Find-SqlDuplicateIndex",
        "Author":  "Claudio Silva (@ClaudioESSilva)",
        "Synopsis":  "Find duplicate and overlapping indexes.",
        "Name":  "Find-DbaDuplicateIndex",
        "Links":  "https://dbatools.io/Find-DbaDuplicateIndex",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eFind-DbaDuplicateIndex -SqlInstance sql2005\nReturns duplicate indexes found on sql2005\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eFind-DbaDuplicateIndex -SqlInstance sql2017 -SqlCredential sqladmin\nFinds exact duplicate indexes on all user databases present on sql2017, using SQL authentication.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eFind-DbaDuplicateIndex -SqlInstance sql2017 -Database db1, db2\nFinds exact duplicate indexes on the db1 and db2 databases.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eFind-DbaDuplicateIndex -SqlInstance sql2017 -IncludeOverlapping\nFinds both duplicate and overlapping indexes on all user databases.",
        "Syntax":  "Find-DbaDuplicateIndex [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [-IncludeOverlapping] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Find-DbaInstance",
        "Description":  "This function searches for SQL Server Instances.\n\nIt supports a variety of scans for this purpose which can be separated in two categories:\n- Discovery\n- Scan\n\nDiscovery:\nThis is where it compiles a list of computers / addresses to check.\nIt supports several methods of generating such lists (including Active Directory lookup or IP Ranges), but also supports specifying a list of computers to check.\n- For details on discovery, see the documentation on the \u0027-DiscoveryType\u0027 parameter\n- For details on explicitly providing a list, see the documentation on the \u0027-ComputerName\u0027 parameter\n\nScan:\nOnce a list of computers has been provided, this command will execute a variety of actions to determine any instances present for each of them.\nThis is described in more detail in the documentation on the \u0027-ScanType\u0027 parameter.\nAdditional parameters allow more granular control over individual scans (e.g. Credentials to use).\n\nNote on logging and auditing:\nThe Discovery phase is un-problematic since it is non-intrusive, however during the scan phase, all targeted computers may be accessed repeatedly.\nThis may cause issues with security teams, due to many logon events and possibly failed authentication.\nThis action constitutes a network scan, which may be illegal depending on the nation you are in and whether you own the network you scan.\nIf you are unsure whether you may use this command in your environment, check the detailed description on the \u0027-ScanType\u0027 parameter and contact your IT security team for advice.",
        "Tags":  [
                     "Instance",
                     "Connect",
                     "SqlServer"
                 ],
        "Params":  [
                       [
                           "ComputerName",
                           "The computer to scan. Can be a variety of input types, including text or the output of Get-ADComputer.\r\nAny extra instance information (such as connection strings or live sql server connections) beyond the computername will be discarded.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "DiscoveryType",
                           "The mechanisms to be used to discover instances.\r\nSupports any combination of:\r\n- Service Principal Name lookup (\u0027Domain\u0027; from Active Directory)\r\n- SQL Instance Enumeration (\u0027DataSourceEnumeration\u0027; same as SSMS uses)\r\n- IP Address range (\u0027IPRange\u0027; all IP Addresses will be scanned)\nSPN Lookup:\r\nThe function tries to connect active directory to look up all computers with registered SQL Instances.\r\nNot all instances need to be registered properly, making this not 100% reliable.\r\nBy default, your nearest Domain Controller is contacted for this scan.\r\nHowever it is possible to explicitly state the DC to contact using its DistinguishedName and the \u0027-DomainController\u0027 parameter.\r\nIf credentials were specified using the \u0027-Credential\u0027 parameter, those same credentials are used to perform this lookup, allowing the scan of other domains.\nSQL Instance Enumeration:\r\nThis uses the default UDP Broadcast based instance enumeration used by SSMS to detect instances.\r\nNote that the result from this is not used in the actual scan, but only to compile a list of computers to scan.\r\nTo enable the same results for the scan, ensure that the \u0027Browser\u0027 scan is enabled.\nIP Address range:\r\nThis \u0027Discovery\u0027 uses a range of IPAddresses and simply passes them on to be tested.\r\nSee the \u0027Description\u0027 part of help on security issues of network scanning.\r\nBy default, it will enumerate all ethernet network adapters on the local computer and scan the entire subnet they are on.\r\nBy using the \u0027-IpAddress\u0027 parameter, custom network ranges can be specified.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "Credential",
                           "The credentials to use on windows network connection.\r\nThese credentials are used for:\r\n- Contact to domain controllers for SPN lookups (only if explicit Domain Controller is specified)\r\n- CIM/WMI contact to the scanned computers during the scan phase (see the \u0027-ScanType\u0027 parameter documentation on affected scans).",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "The credentials used to connect to SqlInstances to during the scan phase.\r\nSee the \u0027-ScanType\u0027 parameter documentation on affected scans.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ScanType",
                           "The scans are the individual methods used to retrieve information about the scanned computer and any potentially installed instances.\r\nThis parameter is optional, by default all scans except for establishing an actual SQL connection are performed.\r\nScans can be specified in any arbitrary combination, however at least one instance detecting scan needs to be specified in order for data to be returned.\nScans:\r\n Browser\r\n- Tries discovering all instances via the browser service\r\n- This scan detects instances.\nSQLService\r\n- Tries listing all SQL Services using CIM/WMI\r\n- This scan uses credentials specified in the \u0027-Credential\u0027 parameter if any.\r\n- This scan detects instances.\r\n- Success in this scan guarantees high confidence (See parameter \u0027-MinimumConfidence\u0027 for details).\nSPN\r\n- Tries looking up the Service Principal Names for each instance\r\n- Will use the nearest Domain Controller by default\r\n- Target a specific domain controller using the \u0027-DomainController\u0027 parameter\r\n- If using the \u0027-DomainController\u0027 parameter, use the \u0027-Credential\u0027 parameter to specify the credentials used to connect\nTCPPort\r\n- Tries connecting to the TCP Ports.\r\n- By default, port 1433 is connected to.\r\n- The parameter \u0027-TCPPort\u0027 can be used to provide a list of port numbers to scan.\r\n- This scan detects possible instances. Since other services might bind to a given port, this is not the most reliable test.\r\n- This scan is also used to validate found SPNs if both scans are used in combination\nDNSResolve\r\n- Tries resolving the computername in DNS\nPing\r\n- Tries pinging the computer. Failure will NOT terminate scans.\nSqlConnect\r\n- Tries to establish a SQL connection to the server\r\n- Uses windows credentials by default\r\n- Specify custom credentials using the \u0027-SqlCredential\u0027 parameter\r\n- This scan is not used by default\r\n- Success in this scan guarantees high confidence (See parameter \u0027-MinimumConfidence\u0027 for details).\nAll\r\n- All of the above",
                           "",
                           false,
                           "false",
                           "Default"
                       ],
                       [
                           "IpAddress",
                           "This parameter can be used to override the defaults for the IPRange discovery.\r\nThis parameter accepts a list of strings supporting any combination of:\r\n- Plain IP Addresses (e.g.: \"10.1.1.1\")\r\n- IP Address Ranges (e.g.: \"10.1.1.1-10.1.1.5\")\r\n- IP Address \u0026 Subnet Mask (e.g.: \"10.1.1.1/255.255.255.0\")\r\n- IP Address \u0026 Subnet Length: (e.g.: \"10.1.1.1/24)\r\nOverlapping addresses will not result in duplicate scans.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "DomainController",
                           "The domain controller to contact for SPN lookups / searches.\r\nUses the credentials from the \u0027-Credential\u0027 parameter if specified.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "TCPPort",
                           "The ports to scan in the TCP Port Scan method.\r\nDefaults to 1433.",
                           "",
                           false,
                           "false",
                           "1433"
                       ],
                       [
                           "MinimumConfidence",
                           "This command tries to discover instances, which isn\u0027t always a sure thing.\r\nDepending on the number and type of scans completed, we have different levels of confidence in our results.\r\nBy default, we will return anything that we have at least a low confidence of being an instance.\r\nThese are the confidence levels we support and how they are determined:\r\n- High: Established SQL Connection (including rejection for bad credentials) or service scan.\r\n- Medium: Browser reply or a combination of TCPConnect _and_ SPN test.\r\n- Low: Either TCPConnect _or_ SPN\r\n- None: Computer existence could be verified, but no sign of an SQL Instance",
                           "",
                           false,
                           "false",
                           "Low"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Scott Sutherland, 2018 NetSPI | Friedrich Weinmann (@FredWeinmann)",
        "Synopsis":  "Search for SQL Server Instances.",
        "Name":  "Find-DbaInstance",
        "Links":  "https://dbatools.io/Find-DbaInstance",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eFind-DbaInstance -DiscoveryType Domain, DataSourceEnumeration\nPerforms a network search for SQL Instances by:\r\n- Looking up the Service Principal Names of computers in active directory\r\n- Using the UDP broadcast based auto-discovery of SSMS\r\nAfter that it will extensively scan all hosts thus discovered for instances.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eFind-DbaInstance -DiscoveryType All\nPerforms a network search for SQL Instances, using all discovery protocols:\r\n- Active directory search for Service Principal Names\r\n- SQL Instance Enumeration (same as SSMS does)\r\n- All IPAddresses in the current computer\u0027s subnets of all connected network interfaces\r\nNote: This scan will take a long time, due to including the IP Scan\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-ADComputer -Filter \"*\" | Find-DbaInstance\nScans all computers in the domain for SQL Instances, using a deep probe:\r\n- Tries resolving the name in DNS\r\n- Tries pinging the computer\r\n- Tries listing all SQL Services using CIM/WMI\r\n- Tries discovering all instances via the browser service\r\n- Tries connecting to the default TCP Port (1433)\r\n- Tries connecting to the TCP port of each discovered instance\r\n- Tries to establish a SQL connection to the server using default windows credentials\r\n- Tries looking up the Service Principal Names for each instance\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-Content .\\servers.txt | Find-DbaInstance -SqlCredential $cred -ScanType Browser, SqlConnect\nReads all servers from the servers.txt file (one server per line),\r\nthen scans each of them for instances using the browser service\r\nand finally attempts to connect to each instance found using the specified credentials.\r\nthen scans each of them for instances using the browser service and SqlService\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eFind-DbaInstance -ComputerName localhost | Get-DbaDatabase | Format-Table -Wrap\nScans localhost for instances using the browser service, traverses all instances for all databases and displays all information in a formatted table.\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eFind-DbaInstance -ComputerName localhost | Get-DbaDatabase | Select-Object SqlInstance, Name, Status, RecoveryModel, SizeMB, Compatibility, Owner, LastFullBackup, LastDiffBackup, LastLogBackup \r\n| Format-Table -Wrap\nScans localhost for instances using the browser service, traverses all instances for all databases and displays a subset of the important information in a formatted table.\nUsing this method reguarly is not recommended. Use Get-DbaService or Get-DbaCmsRegServer instead.",
        "Syntax":  "Find-DbaInstance -ComputerName \u003cDbaInstanceParameter[]\u003e [-Credential \u003cPSCredential\u003e] [-SqlCredential \u003cPSCredential\u003e] [-ScanType {TCPPort | SqlConnect | SqlService | DNSResolve | SPN | Browser | Ping | Default | All}] [-DomainController \u003cString\u003e] [-TCPPort \u003cInt32[]\u003e] [-MinimumConfidence {None | Low | Medium | High}] [-EnableException] [\u003cCommonParameters\u003e]\nFind-DbaInstance -DiscoveryType {IPRange | Domain | DataSourceEnumeration | All} [-Credential \u003cPSCredential\u003e] [-SqlCredential \u003cPSCredential\u003e] [-ScanType {TCPPort | SqlConnect | SqlService | DNSResolve | SPN | Browser | Ping | Default | All}] [-IpAddress \u003cString[]\u003e] [-DomainController \u003cString\u003e] [-TCPPort \u003cInt32[]\u003e] [-MinimumConfidence {None | Low | Medium | High}] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Find-DbaLoginInGroup",
        "Description":  "Outputs all the active directory groups members for a server, or limits it to find a specific AD user in the groups",
        "Tags":  [
                     "Login",
                     "Group",
                     "Security"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "PSCredential object to connect under. If not specified, current Windows login will be used.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Login",
                           "Find all AD Groups used on the instance that an individual login is a member of.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Stephen Bennett, https://sqlnotesfromtheunderground.wordpress.com/ | Simone Bizzotto (@niphlod)",
        "Synopsis":  "Finds Logins in Active Directory groups that have logins on the SQL Instance.",
        "Name":  "Find-DbaLoginInGroup",
        "Links":  "https://dbatools.io/Find-DbaLoginInGroup",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eFind-DbaLoginInGroup -SqlInstance DEV01 -Login \"MyDomain\\Stephen.Bennett\"\nReturns all active directory groups with logins on Sql Instance DEV01 that contain the AD user Stephen.Bennett.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eFind-DbaLoginInGroup -SqlInstance DEV01\nReturns all active directory users within all windows AD groups that have logins on the instance.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eFind-DbaLoginInGroup -SqlInstance DEV01 | Where-Object Login -like \u0027*stephen*\u0027\nReturns all active directory users within all windows AD groups that have logins on the instance whose login contains \"stephen\"",
        "Syntax":  "Find-DbaLoginInGroup [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Login] \u003cString[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Find-DbaOrphanedFile",
        "Description":  "This command searches all directories associated with SQL database files for database files that are not currently in use by the SQL Server instance.\n\nBy default, it looks for orphaned .mdf, .ldf and .ndf files in the root\\data directory, the default data path, the default log path, the system paths and any directory in use by any attached directory.\n\nYou can specify additional filetypes using the -FileType parameter, and additional paths to search using the -Path parameter.",
        "Tags":  [
                     "Orphan",
                     "Database",
                     "DatabaseFile"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2000 or higher.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Path",
                           "Specifies one or more directories to search in addition to the default data and log directories.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "FileType",
                           "Specifies file extensions other than mdf, ldf and ndf to search for. Do not include the dot (\".\") when specifying the extension.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "LocalOnly",
                           "If this switch is enabled, only local filenames will be returned. Using this switch with multiple servers is not recommended since it does not return the associated server name.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "RemoteOnly",
                           "If this switch is enabled, only remote filenames will be returned.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Sander Stad (@sqlstad), sqlstad.nl",
        "Synopsis":  "Find-DbaOrphanedFile finds orphaned database files. Orphaned database files are files not associated with any attached database.",
        "Name":  "Find-DbaOrphanedFile",
        "Links":  "https://dbatools.io/Find-DbaOrphanedFile",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eFind-DbaOrphanedFile -SqlInstance sqlserver2014a\nConnects to sqlserver2014a, authenticating with Windows credentials, and searches for orphaned files. Returns server name, local filename, and unc path to file.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eFind-DbaOrphanedFile -SqlInstance sqlserver2014a -SqlCredential $cred\nConnects to sqlserver2014a, authenticating with SQL Server authentication, and searches for orphaned files. Returns server name, local filename, and unc path to file.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eFind-DbaOrphanedFile -SqlInstance sql2014 -Path \u0027E:\\Dir1\u0027, \u0027E:\\Dir2\u0027\nFinds the orphaned files in \"E:\\Dir1\" and \"E:Dir2\" in addition to the default directories.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eFind-DbaOrphanedFile -SqlInstance sql2014 -LocalOnly\nReturns only the local file paths for orphaned files.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eFind-DbaOrphanedFile -SqlInstance sql2014 -RemoteOnly\nReturns only the remote file path for orphaned files.\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eFind-DbaOrphanedFile -SqlInstance sql2014, sql2016 -FileType fsf, mld\nFinds the orphaned ending with \".fsf\" and \".mld\" in addition to the default filetypes \".mdf\", \".ldf\", \".ndf\" for both the servers sql2014 and sql2016.",
        "Syntax":  "Find-DbaOrphanedFile [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Path] \u003cString[]\u003e] [[-FileType] \u003cString[]\u003e] [-LocalOnly] [-RemoteOnly] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Find-DbaSimilarTable",
        "Description":  "This function can either run against specific databases or all databases searching all/specific tables and views including in system databases.\nTypically one would use this to find for example archive version(s) of a table whose structures are similar.\nThis can also be used to find tables/views that are very similar to a given table/view structure to see where a table/view might be used.\n\nMore information can be found here: https://sqljana.wordpress.com/2017/03/31/sql-server-find-tables-with-similar-table-structure/",
        "Tags":  "Table",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input",
                           "ServerInstance,SqlServer,SqlServers",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SchemaName",
                           "If you are looking in a specific schema whose table structures is to be used as reference structure, provide the name of the schema.\r\nIf no schema is provided, looks at all schemas",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "TableName",
                           "If you are looking in a specific table whose structure is to be used as reference structure, provide the name of the table.\r\nIf no table is provided, looks at all tables\r\nIf the table name exists in multiple schemas, all of them would qualify",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeViews",
                           "By default, views are included. You can exclude them by setting this switch to $false\r\nThis excludes views in both matching and matched list",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "IncludeSystemDatabases",
                           "By default system databases are ignored but you can include them within the search using this parameter",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "MatchPercentThreshold",
                           "The minimum percentage of column names that should match between the matching and matched objects.\r\nEntries with no matches are eliminated",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Jana Sattainathan (@SQLJana), http://sqljana.wordpress.com",
        "Synopsis":  "Returns all tables/views that are similar in structure by comparing the column names of matching and matched tables/views",
        "Name":  "Find-DbaSimilarTable",
        "Links":  "https://dbatools.io/Find-DbaSimilarTable",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eFind-DbaSimilarTable -SqlInstance DEV01\nSearches all user database tables and views for each, returns all tables or views with their matching tables/views and match percent\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eFind-DbaSimilarTable -SqlInstance DEV01 -Database AdventureWorks\nSearches AdventureWorks database and lists tables/views and their corresponding matching tables/views with match percent\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eFind-DbaSimilarTable -SqlInstance DEV01 -Database AdventureWorks -SchemaName HumanResource\nSearches AdventureWorks database and lists tables/views in the HumanResource schema with their corresponding matching tables/views with match percent\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eFind-DbaSimilarTable -SqlInstance DEV01 -Database AdventureWorks -SchemaName HumanResource -Table Employee\nSearches AdventureWorks database and lists tables/views in the HumanResource schema and table Employee with its corresponding matching tables/views with match percent\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eFind-DbaSimilarTable -SqlInstance DEV01 -Database AdventureWorks -MatchPercentThreshold 60\nSearches AdventureWorks database and lists all tables/views with its corresponding matching tables/views with match percent greater than or equal to 60",
        "Syntax":  "Find-DbaSimilarTable [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Database \u003cObject[]\u003e] [-ExcludeDatabase \u003cObject[]\u003e] [-SchemaName \u003cString\u003e] [-TableName \u003cString\u003e] [-ExcludeViews] [-IncludeSystemDatabases] [-MatchPercentThreshold \u003cInt32\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Find-DbaStoredProcedure",
        "Description":  "This function can either run against specific databases or all databases searching all user or user and system stored procedures.",
        "Tags":  [
                     "StoredProcedure",
                     "Proc"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input",
                           "ServerInstance,SqlServer,SqlServers",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Pattern",
                           "String pattern that you want to search for in the stored procedure text body",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "IncludeSystemObjects",
                           "By default, system stored procedures are ignored but you can include them within the search using this parameter.\nWarning - this will likely make it super slow if you run it on all databases.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "IncludeSystemDatabases",
                           "By default system databases are ignored but you can include them within the search using this parameter",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Stephen Bennett, https://sqlnotesfromtheunderground.wordpress.com/",
        "Synopsis":  "Returns all stored procedures that contain a specific case-insensitive string or regex pattern.",
        "Name":  "Find-DbaStoredProcedure",
        "Links":  "https://dbatools.io/Find-DbaStoredProcedure",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eFind-DbaStoredProcedure -SqlInstance DEV01 -Pattern whatever\nSearches all user databases stored procedures for \"whatever\" in the text body\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eFind-DbaStoredProcedure -SqlInstance sql2016 -Pattern \u0027\\w+@\\w+\\.\\w+\u0027\nSearches all databases for all stored procedures that contain a valid email pattern in the text body\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eFind-DbaStoredProcedure -SqlInstance DEV01 -Database MyDB -Pattern \u0027some string\u0027 -Verbose\nSearches in \"mydb\" database stored procedures for \"some string\" in the text body\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eFind-DbaStoredProcedure -SqlInstance sql2016 -Database MyDB -Pattern RUNTIME -IncludeSystemObjects\nSearches in \"mydb\" database stored procedures for \"runtime\" in the text body",
        "Syntax":  "Find-DbaStoredProcedure [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Database \u003cObject[]\u003e] [-ExcludeDatabase \u003cObject[]\u003e] -Pattern \u003cString\u003e [-IncludeSystemObjects] [-IncludeSystemDatabases] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Find-DbaTrigger",
        "Description":  "This function search on Instance, Database and Object level.\nIf you specify one or more databases, search on Server level will not be preformed.",
        "Tags":  "Trigger",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input",
                           "ServerInstance,SqlServer,SqlServers",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Pattern",
                           "String pattern that you want to search for in the trigger text body",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "TriggerLevel",
                           "Allows specify the trigger level that you want to search. By default is All (Server, Database, Object).",
                           "",
                           false,
                           "false",
                           "All"
                       ],
                       [
                           "IncludeSystemObjects",
                           "By default, system triggers are ignored but you can include them within the search using this parameter.\nWarning - this will likely make it super slow if you run it on all databases.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "IncludeSystemDatabases",
                           "By default system databases are ignored but you can include them within the search using this parameter",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Claudio Silva (@ClaudioESSilva)",
        "Synopsis":  "Returns all triggers that contain a specific case-insensitive string or regex pattern.",
        "Name":  "Find-DbaTrigger",
        "Links":  "https://dbatools.io/Find-DbaTrigger",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eFind-DbaTrigger -SqlInstance DEV01 -Pattern whatever\nSearches all user databases triggers for \"whatever\" in the text body\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eFind-DbaTrigger -SqlInstance sql2016 -Pattern \u0027\\w+@\\w+\\.\\w+\u0027\nSearches all databases for all triggers that contain a valid email pattern in the text body\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eFind-DbaTrigger -SqlInstance DEV01 -Database MyDB -Pattern \u0027some string\u0027 -Verbose\nSearches in \"mydb\" database triggers for \"some string\" in the text body\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eFind-DbaTrigger -SqlInstance sql2016 -Database MyDB -Pattern RUNTIME -IncludeSystemObjects\nSearches in \"mydb\" database triggers for \"runtime\" in the text body",
        "Syntax":  "Find-DbaTrigger [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Database \u003cObject[]\u003e] [-ExcludeDatabase \u003cObject[]\u003e] -Pattern \u003cString\u003e [-TriggerLevel \u003cString\u003e] [-IncludeSystemObjects] [-IncludeSystemDatabases] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Find-DbaUserObject",
        "Description":  "Looks at the below list of objects to see if they are either owned by a user or a specific user (using the parameter -Pattern)\nDatabase Owner\nAgent Job Owner\nUsed in Credential\nUSed in Proxy\nSQL Agent Steps using a Proxy\nEndpoints\nServer Roles\nDatabase Schemas\nDatabase Roles\nDatabase Assembles\nDatabase Synonyms",
        "Tags":  "Object",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input",
                           "ServerInstance,SqlServer,SqlInstances",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Pattern",
                           "The regex pattern that the command will search for",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Stephen Bennett, https://sqlnotesfromtheunderground.wordpress.com/",
        "Synopsis":  "Searches SQL Server to find user-owned objects (i.e. not dbo or sa) or for any object owned by a specific user specified by the Pattern parameter.",
        "Name":  "Find-DbaUserObject",
        "Links":  "https://dbatools.io/Find-DbaUserObject",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eFind-DbaUserObject -SqlInstance DEV01 -Pattern ad\\stephen\nSearches user objects for owner ad\\stephen\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eFind-DbaUserObject -SqlInstance DEV01 -Verbose\nShows all user owned (non-sa, non-dbo) objects and verbose output",
        "Syntax":  "Find-DbaUserObject [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Pattern \u003cString\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Find-DbaView",
        "Description":  "This function can either run against specific databases or all databases searching all user or user and system views.",
        "Tags":  "View",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input",
                           "ServerInstance,SqlServer,SqlServers",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Pattern",
                           "String pattern that you want to search for in the view text body",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "IncludeSystemObjects",
                           "By default, system views are ignored but you can include them within the search using this parameter.\nWarning - this will likely make it super slow if you run it on all databases.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "IncludeSystemDatabases",
                           "By default system databases are ignored but you can include them within the search using this parameter",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Claudio Silva  (@ClaudioESSilva)",
        "Synopsis":  "Returns all views that contain a specific case-insensitive string or regex pattern.",
        "Name":  "Find-DbaView",
        "Links":  "https://dbatools.io/Find-DbaView",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eFind-DbaView -SqlInstance DEV01 -Pattern whatever\nSearches all user databases views for \"whatever\" in the text body\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eFind-DbaView -SqlInstance sql2016 -Pattern \u0027\\w+@\\w+\\.\\w+\u0027\nSearches all databases for all views that contain a valid email pattern in the text body\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eFind-DbaView -SqlInstance DEV01 -Database MyDB -Pattern \u0027some string\u0027 -Verbose\nSearches in \"mydb\" database views for \"some string\" in the text body\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eFind-DbaView -SqlInstance sql2016 -Database MyDB -Pattern RUNTIME -IncludeSystemObjects\nSearches in \"mydb\" database views for \"runtime\" in the text body",
        "Syntax":  "Find-DbaView [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Database \u003cObject[]\u003e] [-ExcludeDatabase \u003cObject[]\u003e] -Pattern \u003cString\u003e [-IncludeSystemObjects] [-IncludeSystemDatabases] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Format-DbaBackupInformation",
        "Description":  "Performs various mapping on Backup History, ready restoring\nOptions include changing restore paths, backup paths, database name and many others",
        "Tags":  [
                     "DisasterRecovery",
                     "Backup",
                     "Restore"
                 ],
        "Params":  [
                       [
                           "BackupHistory",
                           "A dbatools backupHistory object, normally this will have been created using Select-DbaBackupInformation",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "ReplaceDatabaseName",
                           "If a single value is provided, this will be replaced do all occurrences a database name\r\nIf a Hashtable is passed in, each database name mention will be replaced as specified. If a database\u0027s name does not appear it will not be replace\r\nDatabaseName will also be replaced where it  occurs in the file paths of data and log files.\r\nPlease note, that this won\u0027t change the Logical Names of data files, that has to be done with a separate Alter DB call",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ReplaceDbNameInFile",
                           "If set, will replace the old database name with the new name if it occurs in the file name",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "DataFileDirectory",
                           "This will move ALL restored files to this location during the restore",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "LogFileDirectory",
                           "This will move all log files to this location, overriding DataFileDirectory",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "DestinationFileStreamDirectory",
                           "This move the FileStream folder and contents to the new location, overriding DataFileDirectory",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "DatabaseNamePrefix",
                           "This string will be prefixed to all restored database\u0027s name",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "DatabaseFilePrefix",
                           "A string that will be prefixed to every file restored",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "DatabaseFileSuffix",
                           "A string that will be suffixed to every file restored",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "RebaseBackupFolder",
                           "Use this to rebase where your backups are stored.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Continue",
                           "Indicates that this is a continuing restore",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "FileMapping",
                           "A hashtable that can be used to move specific files to a location.\r\n`$FileMapping = @{\u0027DataFile1\u0027=\u0027c:\\restoredfiles\\Datafile1.mdf\u0027;\u0027DataFile3\u0027=\u0027d:\\DataFile3.mdf\u0027}`\r\nAnd files not specified in the mapping will be restored to their original location\r\nThis Parameter is exclusive with DestinationDataDirectory\r\nIf specified, this will override any other file renaming/relocation options.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "PathSep",
                           "By default is Windows\u0027s style (`\\`) but you can pass also, e.g., `/` for Unix\u0027s style paths",
                           "",
                           false,
                           "false",
                           "\\"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Stuart Moore (@napalmgram), stuart-moore.com",
        "Synopsis":  "Transforms the data in a dbatools BackupHistory object for a restore",
        "Name":  "Format-DbaBackupInformation",
        "Links":  "https://dbatools.io/Format-DbaBackupInformation",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003e$History | Format-DbaBackupInformation -ReplaceDatabaseName NewDb\nChanges as database name references to NewDb, both in the database name and any restore paths. Note, this will fail if the BackupHistory object contains backups for more than 1 database\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e$History | Format-DbaBackupInformation -ReplaceDatabaseName @{\u0027OldB\u0027=\u0027NewDb\u0027;\u0027ProdHr\u0027=\u0027DevHr\u0027}\nWill change all occurrences of original database name in the backup history (names and restore paths) using the mapping in the hashtable.\r\nIn this example any occurrence of OldDb will be replaced with NewDb and ProdHr with DevPR\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003e$History | Format-DbaBackupInformation -DataFileDirectory \u0027D:\\DataFiles\\\u0027 -LogFileDirectory \u0027E:\\LogFiles\\\nThis example with change the restore path for all data files (everything that is not a log file) to d:\\datafiles\r\nAnd all Transaction Log files will be restored to E:\\Logfiles\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003e$History | Format-DbaBackupInformation -RebaseBackupFolder f:\\backups\nThis example changes the location that SQL Server will look for the backups. This is useful if you\u0027ve moved the backups to a different location",
        "Syntax":  "Format-DbaBackupInformation [-BackupHistory] \u003cObject[]\u003e [[-ReplaceDatabaseName] \u003cObject\u003e] [-ReplaceDbNameInFile] [[-DataFileDirectory] \u003cString\u003e] [[-LogFileDirectory] \u003cString\u003e] [[-DestinationFileStreamDirectory] \u003cString\u003e] [[-DatabaseNamePrefix] \u003cString\u003e] [[-DatabaseFilePrefix] \u003cString\u003e] [[-DatabaseFileSuffix] \u003cString\u003e] [[-RebaseBackupFolder] \u003cString\u003e] [-Continue] [[-FileMapping] \u003cHashtable\u003e] [[-PathSep] \u003cString\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaAgDatabase",
        "Description":  "Gets availability group databases from a SQL Server instance.\n\nDefault view provides most common set of properties for information on the database in an availability group.\n\nInformation returned on the database will be specific to that replica, whether it is primary or a secondary.",
        "Tags":  [
                     "Hadr",
                     "HA",
                     "AG",
                     "AvailabilityGroup",
                     "Replica"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. Server version must be SQL Server version 2012 or higher.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the SqlInstance instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AvailabilityGroup",
                           "Specify the availability groups to query.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Specify the database or databases to return. This list is auto-populated from the server for tab completion. Multiple databases can be specified. If none are specified all databases will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Enables piped input from Get-DbaAvailabilityGroup.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Shawn Melton (@wsmelton), https://wsmelton.github.io",
        "Synopsis":  "Gets availability group databases from a SQL Server instance.",
        "Name":  "Get-DbaAgDatabase",
        "Links":  "https://dbatools.io/Get-DbaAgDatabase",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaAgDatabase -SqlInstance sql2017a\nReturns all the databases in each availability group found on sql2017a\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaAgDatabase -SqlInstance sql2017a -AvailabilityGroup AG101\nReturns all the databases in the availability group AG101 on sql2017a\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaAvailabilityGroup -SqlInstance sqlcluster -AvailabilityGroup SharePoint -Database Sharepoint_Config | Get-DbaAgDatabase\nReturns the database Sharepoint_Config found in the availability group SharePoint on server sqlcluster",
        "Syntax":  "Get-DbaAgDatabase [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-AvailabilityGroup] \u003cString[]\u003e] [[-Database] \u003cString[]\u003e] [[-InputObject] \u003cAvailabilityGroup[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaAgentAlert",
        "Description":  "This function returns SQL Agent alerts.",
        "Tags":  [
                     "Agent",
                     "SMO"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.",
                           "ServerInstance,Instance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Klaas Vandenberghe (@PowerDBAKlaas)",
        "Synopsis":  "Returns all SQL Agent alerts on a SQL Server Agent.",
        "Name":  "Get-DbaAgentAlert",
        "Links":  "https://dbatools.io/Get-DbaAgentAlert",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaAgentAlert -SqlInstance ServerA,ServerB\\instanceB\nReturns all SQL Agent alerts on serverA and serverB\\instanceB\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e\u0027serverA\u0027,\u0027serverB\\instanceB\u0027 | Get-DbaAgentAlert\nReturns all SQL Agent alerts  on serverA and serverB\\instanceB",
        "Syntax":  "Get-DbaAgentAlert [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaAgentJob",
        "Description":  "The Get-DbaAgentJob returns connected SMO object for SQL Agent Job information for each instance(s) of SQL Server.",
        "Tags":  [
                     "Job",
                     "Agent"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Job",
                           "The job(s) to process - this list is auto-populated from the server. If unspecified, all jobs will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeJob",
                           "The job(s) to exclude - this list is auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Return jobs with T-SQL job steps associated with specific databases",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Category",
                           "Return jobs associated with specific category",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDisabledJobs",
                           "Switch will exclude disabled jobs from the output.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Garry Bargsley (@gbargsley), http://blog.garrybargsley.com",
        "Synopsis":  "Gets SQL Agent Job information for each instance(s) of SQL Server.",
        "Name":  "Get-DbaAgentJob",
        "Links":  "https://dbatools.io/Get-DbaAgentJob",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaAgentJob -SqlInstance localhost\nReturns all SQL Agent Jobs on the local default SQL Server instance\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaAgentJob -SqlInstance localhost, sql2016\nReturns all SQl Agent Jobs for the local and sql2016 SQL Server instances\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaAgentJob -SqlInstance localhost -Job BackupData, BackupDiff\nReturns all SQL Agent Jobs named BackupData and BackupDiff from the local SQL Server instance.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaAgentJob -SqlInstance localhost -ExcludeJob BackupDiff\nReturns all SQl Agent Jobs for the local SQL Server instances, except the BackupDiff Job.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eGet-DbaAgentJob -SqlInstance localhost -ExcludeDisabledJobs\nReturns all SQl Agent Jobs for the local SQL Server instances, excluding the disabled jobs.\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003e$servers | Get-DbaAgentJob | Out-GridView -PassThru | Start-DbaAgentJob -WhatIf\nFind all of your Jobs from SQL Server instances in the $servers collection, select the jobs you want to start then see jobs would start if you ran Start-DbaAgentJob\n-------------------------- EXAMPLE 7 --------------------------\nPS C:\\\u003eGet-DbaAgentJob -SqlInstance sqlserver2014a | Where-Object Category -eq \"Report Server\" | Export-DbaScript -Path \"C:\\temp\\sqlserver2014a_SSRSJobs.sql\"\nExports all SSRS jobs from SQL instance sqlserver2014a to a file.",
        "Syntax":  "Get-DbaAgentJob [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Job \u003cString[]\u003e] [-ExcludeJob \u003cString[]\u003e] [-Database \u003cString[]\u003e] [-Category \u003cString[]\u003e] [-ExcludeDisabledJobs] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaAgentJobCategory",
        "Description":  "Get-DbaAgentJobCategory makes it possible to retrieve the job categories.",
        "Tags":  [
                     "Agent",
                     "Job",
                     "JobCategory"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Category",
                           "The name of the category to filter out. If no category is used all categories will be returned.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "CategoryType",
                           "The type of category. This can be \"LocalJob\", \"MultiServerJob\" or \"None\".\r\nIf no category is used all categories types will be returned.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Force",
                           "The force parameter will ignore some errors in the parameters and assume defaults.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Get-DbaJobCategory",
        "Author":  "Sander Stad (@sqlstad), sqlstad.nl",
        "Synopsis":  "Get-DbaAgentJobCategory retrieves the job categories.",
        "Name":  "Get-DbaAgentJobCategory",
        "Links":  "https://dbatools.io/Get-DbaAgentJobCategory",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaAgentJobCategory -SqlInstance sql1\nReturn all the job categories.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaAgentJobCategory -SqlInstance sql1 -Category \u0027Log Shipping\u0027\nReturn all the job categories that have the name \u0027Log Shipping\u0027.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaAgentJobCategory -SqlInstance sstad-pc -CategoryType MultiServerJob\nReturn all the job categories that have a type MultiServerJob.",
        "Syntax":  "Get-DbaAgentJobCategory [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Category] \u003cString[]\u003e] [[-CategoryType] \u003cString\u003e] [-Force] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaAgentJobHistory",
        "Description":  "Get-DbaAgentJobHistory returns all information on the executions still available on each instance(s) of SQL Server submitted.\nThe cleanup of SQL Agent history determines how many records are kept.\n\nhttps://msdn.microsoft.com/en-us/library/ms201680.aspx\nhttps://msdn.microsoft.com/en-us/library/microsoft.sqlserver.management.smo.agent.jobhistoryfilter(v=sql.120).aspx",
        "Tags":  [
                     "Job",
                     "Agent"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Job",
                           "The name of the job from which the history is wanted. If unspecified, all jobs will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeJob",
                           "The job(s) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "StartDate",
                           "The DateTime starting from which the history is wanted. If unspecified, all available records will be processed.",
                           "",
                           false,
                           "false",
                           "1900-01-01"
                       ],
                       [
                           "EndDate",
                           "The DateTime before which the history is wanted. If unspecified, all available records will be processed.",
                           "",
                           false,
                           "false",
                           "$(Get-Date)"
                       ],
                       [
                           "ExcludeJobSteps",
                           "Use this switch to discard all job steps, and return only the job totals",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WithOutputFile",
                           "Use this switch to retrieve the output file (only if you want step details). Bonus points, we handle the quirks\r\nof SQL Agent tokens to the best of our knowledge (https://technet.microsoft.com/it-it/library/ms175575(v=sql.110).aspx)",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "JobCollection",
                           "An array of SMO jobs",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Klaas Vandenberghe (@PowerDbaKlaas) | Simone Bizzotto (@niphold)",
        "Synopsis":  "Gets execution history of SQL Agent Job on instance(s) of SQL Server.",
        "Name":  "Get-DbaAgentJobHistory",
        "Links":  "https://dbatools.io/Get-DbaAgentJobHistory",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaAgentJobHistory -SqlInstance localhost\nReturns all SQL Agent Job execution results on the local default SQL Server instance.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaAgentJobHistory -SqlInstance localhost, sql2016\nReturns all SQL Agent Job execution results for the local and sql2016 SQL Server instances.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003e\u0027sql1\u0027,\u0027sql2\\Inst2K17\u0027 | Get-DbaAgentJobHistory\nReturns all SQL Agent Job execution results for sql1 and sql2\\Inst2K17.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaAgentJobHistory -SqlInstance sql2\\Inst2K17 | Select-Object *\nReturns all properties for all SQl Agent Job execution results on sql2\\Inst2K17.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eGet-DbaAgentJobHistory -SqlInstance sql2\\Inst2K17 -Job \u0027Output File Cleanup\u0027\nReturns all properties for all SQl Agent Job execution results of the \u0027Output File Cleanup\u0027 job on sql2\\Inst2K17.\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eGet-DbaAgentJobHistory -SqlInstance sql2\\Inst2K17 -Job \u0027Output File Cleanup\u0027 -WithOutputFile\nReturns all properties for all SQl Agent Job execution results of the \u0027Output File Cleanup\u0027 job on sql2\\Inst2K17,\r\nwith additional properties that show the output filename path\n-------------------------- EXAMPLE 7 --------------------------\nPS C:\\\u003eGet-DbaAgentJobHistory -SqlInstance sql2\\Inst2K17 -ExcludeJobSteps\nReturns the SQL Agent Job execution results for the whole jobs on sql2\\Inst2K17, leaving out job step execution results.\n-------------------------- EXAMPLE 8 --------------------------\nPS C:\\\u003eGet-DbaAgentJobHistory -SqlInstance sql2\\Inst2K17 -StartDate \u00272017-05-22\u0027 -EndDate \u00272017-05-23 12:30:00\u0027\nReturns the SQL Agent Job execution results between 2017/05/22 00:00:00 and 2017/05/23 12:30:00 on sql2\\Inst2K17.\n-------------------------- EXAMPLE 9 --------------------------\nPS C:\\\u003eGet-DbaAgentJob -SqlInstance sql2016 | Where-Object Name -Match backup | Get-DbaAgentJobHistory\nGets all jobs with the name that match the regex pattern \"backup\" and then gets the job history from those. You can also use -Like *backup* in this example.",
        "Syntax":  "Get-DbaAgentJobHistory [-SqlCredential \u003cPSCredential\u003e] [-Job \u003cObject[]\u003e] [-ExcludeJob \u003cObject[]\u003e] [-StartDate \u003cDateTime\u003e] [-EndDate \u003cDateTime\u003e] [-ExcludeJobSteps] [-WithOutputFile] [-EnableException] [\u003cCommonParameters\u003e]\nGet-DbaAgentJobHistory -SqlInstance \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Job \u003cObject[]\u003e] [-ExcludeJob \u003cObject[]\u003e] [-StartDate \u003cDateTime\u003e] [-EndDate \u003cDateTime\u003e] [-ExcludeJobSteps] [-WithOutputFile] [-EnableException] [\u003cCommonParameters\u003e]\nGet-DbaAgentJobHistory [-SqlCredential \u003cPSCredential\u003e] [-Job \u003cObject[]\u003e] [-ExcludeJob \u003cObject[]\u003e] [-StartDate \u003cDateTime\u003e] [-EndDate \u003cDateTime\u003e] [-ExcludeJobSteps] [-WithOutputFile] -JobCollection \u003cJob\u003e [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaAgentJobOutputFile",
        "Description":  "This function returns for one or more SQL Instances the output file value for each step of one or many agent job with the Job Names\nprovided dynamically. It will not return anything if there is no Output File",
        "Tags":  [
                     "Agent",
                     "Job"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue, ByPropertyName)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Credential object used to connect to the SQL Server as a different user be it Windows or SQL Server. Windows users are determined by the existence of a backslash, so if you are intending to use an \r\nalternative Windows connection instead of a SQL login, ensure it contains a backslash.",
                           "",
                           false,
                           "true (ByPropertyName)",
                           ""
                       ],
                       [
                           "Job",
                           "The job(s) to process - this list is auto-populated from the server. If unspecified, all jobs will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeJob",
                           "The job(s) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Rob Sewell (https://sqldbawithabeard.com) | Simone Bizzotto (@niphold)",
        "Synopsis":  "Returns the Output File for each step of one or many agent job with the Job Names provided dynamically if\nrequired for one or more SQL Instances",
        "Name":  "Get-DbaAgentJobOutputFile",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaAgentJobOutputFile -SqlInstance SERVERNAME -Job \u0027The Agent Job\u0027\nThis will return the configured paths to the output files for each of the job step of the The Agent Job Job\r\non the SERVERNAME instance\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaAgentJobOutputFile -SqlInstance SERVERNAME\nThis will return the configured paths to the output files for each of the job step of all the Agent Jobs\r\non the SERVERNAME instance\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaAgentJobOutputFile -SqlInstance SERVERNAME,SERVERNAME2 -Job \u0027The Agent Job\u0027\nThis will return the configured paths to the output files for each of the job step of the The Agent Job Job\r\non the SERVERNAME instance and SERVERNAME2\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003e$Servers = \u0027SERVER\u0027,\u0027SERVER\\INSTANCE1\u0027\nGet-DbaAgentJobOutputFile -SqlInstance $Servers -Job \u0027The Agent Job\u0027 -OpenFile\nThis will return the configured paths to the output files for each of the job step of the The Agent Job Job\r\non the SERVER instance and the SERVER\\INSTANCE1 and open the files if they are available\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eGet-DbaAgentJobOutputFile -SqlInstance SERVERNAME  | Out-GridView\nThis will return the configured paths to the output files for each of the job step of all the Agent Jobs\r\non the SERVERNAME instance and Pipe them to Out-GridView\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003e(Get-DbaAgentJobOutputFile -SqlInstance SERVERNAME | Out-GridView -PassThru).FileName | Invoke-Item\nThis will return the configured paths to the output files for each of the job step of all the Agent Jobs\r\non the SERVERNAME instance and Pipe them to Out-GridView and enable you to choose the output\r\nfile and open it\n-------------------------- EXAMPLE 7 --------------------------\nPS C:\\\u003eGet-DbaAgentJobOutputFile -SqlInstance SERVERNAME -Verbose\nThis will return the configured paths to the output files for each of the job step of all the Agent Jobs\r\non the SERVERNAME instance and also show the job steps without an output file",
        "Syntax":  "Get-DbaAgentJobOutputFile [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-Job \u003cObject[]\u003e] [-ExcludeJob \u003cObject[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaAgentJobStep",
        "Description":  "The Get-DbaAgentJobStep returns connected SMO object for SQL Agent Job Step for each instance(s) of SQL Server.",
        "Tags":  [
                     "Job",
                     "Agent"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Job",
                           "The job(s) to process - this list is auto-populated from the server. If unspecified, all jobs will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeJob",
                           "The job(s) to exclude - this list is auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDisabledJobs",
                           "Switch will exclude disabled jobs from the output.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Klaas Vandenberghe (@PowerDbaKlaas), http://powerdba.eu",
        "Synopsis":  "Gets SQL Agent Job Step information for each instance(s) of SQL Server.",
        "Name":  "Get-DbaAgentJobStep",
        "Links":  "https://dbatools.io/Get-DbaAgentJobStep",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaAgentJobStep -SqlInstance localhost\nReturns all SQL Agent Job Steps on the local default SQL Server instance\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaAgentJobStep -SqlInstance localhost, sql2016\nReturns all SQL Agent Job Steps for the local and sql2016 SQL Server instances\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaAgentJobStep -SqlInstance localhost -Job BackupData, BackupDiff\nReturns all SQL Agent Job Steps for the jobs named BackupData and BackupDiff from the local SQL Server instance.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaAgentJobStep -SqlInstance localhost -ExcludeJob BackupDiff\nReturns all SQL Agent Job Steps for the local SQL Server instances, except for the BackupDiff Job.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eGet-DbaAgentJobStep -SqlInstance localhost -ExcludeDisabledJobs\nReturns all SQL Agent Job Steps for the local SQL Server instances, excluding the disabled jobs.\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003e$servers | Get-DbaAgentJobStep\nFind all of your Job Steps from SQL Server instances in the $servers collection",
        "Syntax":  "Get-DbaAgentJobStep [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Job \u003cObject[]\u003e] [-ExcludeJob \u003cObject[]\u003e] [-ExcludeDisabledJobs] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaAgentLog",
        "Description":  "Gets the \"SQL Agent Error Log\" of an instance. Returns all 10 error logs by default.",
        "Tags":  "Logging",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.",
                           "ServerInstance,SqlServer",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to login to servers using SQL Logins as opposed to Windows Auth/Integrated/Trusted.",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "LogNumber",
                           "An Int32 value that specifies the index number of the error log required. Error logs are listed 0 through 9 where 0 is the current error log and 9 is the oldest.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Gets the \"SQL Agent Error Log\" of an instance",
        "Name":  "Get-DbaAgentLog",
        "Links":  "https://dbatools.io/Get-DbaAgentLog",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaAgentLog -SqlInstance sql01\\sharepoint\nReturns the entire error log for the SQL Agent on sql01\\sharepoint\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaAgentLog -SqlInstance sql01\\sharepoint -LogNumber 3, 6\nReturns log numbers 3 and 6 for the SQL Agent on sql01\\sharepoint\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003e$servers = \"sql2014\",\"sql2016\", \"sqlcluster\\sharepoint\"\nPS C:\\\u003e $servers | Get-DbaAgentLog -LogNumber 0\nReturns the most recent SQL Agent error logs for \"sql2014\",\"sql2016\" and \"sqlcluster\\sharepoint\"",
        "Syntax":  "Get-DbaAgentLog [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-LogNumber] \u003cInt32[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaAgentOperator",
        "Description":  "This function returns SQL Agent operators.",
        "Tags":  [
                     "Agent",
                     "Operator"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Operator",
                           "The operator(s) to process - this list is auto-populated from the server. If unspecified, all operators will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeOperator",
                           "The operator(s) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Klaas Vandenberghe (@PowerDBAKlaas)",
        "Synopsis":  "Returns all SQL Agent operators on a SQL Server Agent.",
        "Name":  "Get-DbaAgentOperator",
        "Links":  "https://dbatools.io/Get-DbaAgentOperator",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaAgentOperator -SqlInstance ServerA,ServerB\\instanceB\nReturns any SQL Agent operators on serverA and serverB\\instanceB\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e\u0027ServerA\u0027,\u0027ServerB\\instanceB\u0027 | Get-DbaAgentOperator\nReturns all SQL Agent operators  on serverA and serverB\\instanceB\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaAgentOperator -SqlInstance ServerA -Operator Dba1,Dba2\nReturns only the SQL Agent Operators Dba1 and Dba2 on ServerA.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaAgentOperator -SqlInstance ServerA,ServerB -ExcludeOperator Dba3\nReturns all the SQL Agent operators on ServerA and ServerB, except the Dba3 operator.",
        "Syntax":  "Get-DbaAgentOperator [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Operator \u003cObject[]\u003e] [-ExcludeOperator \u003cObject[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaAgentProxy",
        "Description":  "This function returns SQL Agent proxies.",
        "Tags":  [
                     "Agent",
                     "SMO"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.",
                           "ServerInstance,Instance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Proxy",
                           "The proxy to process - this list is auto-populated from the server. If unspecified, all proxies will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Returns all SQL Agent proxies on a SQL Server Agent.",
        "Name":  "Get-DbaAgentProxy",
        "Links":  "https://dbatools.io/Get-DbaAgentProxy",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaAgentProxy -SqlInstance ServerA,ServerB\\instanceB\nReturns all SQL Agent proxies on serverA and serverB\\instanceB\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e\u0027serverA\u0027,\u0027serverB\\instanceB\u0027 | Get-DbaAgentProxy\nReturns all SQL Agent proxies  on serverA and serverB\\instanceB",
        "Syntax":  "Get-DbaAgentProxy [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Proxy \u003cString[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaAgentSchedule",
        "Description":  "This function returns SQL Agent Shared Schedules.",
        "Tags":  [
                     "Agent",
                     "Schedule"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.",
                           "ServerInstance,Instance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Schedule",
                           "Parameter to filter the schedules returned",
                           "Schedules",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chris McKeown (@devopsfu), http://www.devopsfu.com",
        "Synopsis":  "Returns all SQL Agent Shared Schedules on a SQL Server Agent.",
        "Name":  "Get-DbaAgentSchedule",
        "Links":  "https://dbatools.io/Get-DbaAgentSchedule",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaAgentSchedule -SqlInstance localhost\nReturns all SQL Agent Shared Schedules on the local default SQL Server instance\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaAgentSchedule -SqlInstance localhost, sql2016\nReturns all SQL Agent Shared Schedules for the local and sql2016 SQL Server instances\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaAgentSchedule -SqlInstance sql2016 -Schedule \"Maintenance10min\",\"Maintenance60min\"\nReturns the \"Maintenance10min\" \u0026 \"Maintenance60min\" schedules from the sql2016 SQL Server instance",
        "Syntax":  "Get-DbaAgentSchedule [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-Schedule \u003cObject[]\u003e] [-SqlCredential \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaAgentServer",
        "Description":  "The Get-DbaAgentServer returns connected SMO object for SQL Agent Server information for each instance(s) of SQL Server.",
        "Tags":  [
                     "Job",
                     "Agent"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Cláudio Silva (@claudioessilva), https://claudioessilva.eu",
        "Synopsis":  "Gets SQL Agent Server information for each instance(s) of SQL Server.",
        "Name":  "Get-DbaAgentServer",
        "Links":  "https://dbatools.io/Get-DbaAgentServer",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaAgentServer -SqlInstance localhost\nReturns SQL Agent Server on the local default SQL Server instance\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaAgentServer -SqlInstance localhost, sql2016\nReturns SQL Agent Servers for the localhost and sql2016 SQL Server instances",
        "Syntax":  "Get-DbaAgentServer [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaAgHadr",
        "Description":  "Gets the Hadr setting, from the service level, and returns true or false for the specified SQL Server instance.",
        "Tags":  [
                     "Hadr",
                     "HA",
                     "AG",
                     "AvailabilityGroup"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Shawn Melton (@wsmelton), http://wsmelton.github.io",
        "Synopsis":  "Gets the Hadr service setting on the specified SQL Server instance.",
        "Name":  "Get-DbaAgHadr",
        "Links":  "https://dbatools.io/Get-DbaAgHadr",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaAgHadr -SqlInstance sql2016\nReturns a status of the Hadr setting for sql2016 SQL Server instance.",
        "Syntax":  "Get-DbaAgHadr [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaAgListener",
        "Description":  "Returns availability group listeners.",
        "Tags":  [
                     "AG",
                     "HA",
                     "AvailabilityGroup",
                     "Listener"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. Server version must be SQL Server version 2012 or higher.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the SqlInstance instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AvailabilityGroup",
                           "Specify the availability groups to query.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Listener",
                           "Return only specific listeners.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Enables piped input from Get-DbaAvailabilityGroup.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Viorel Ciucu (@viorelciucu)",
        "Synopsis":  "Returns availability group listeners.",
        "Name":  "Get-DbaAgListener",
        "Links":  "https://dbatools.io/Get-DbaAgListener",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaAgListener -SqlInstance sql2017a\nReturns all listeners found on sql2017a\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaAgListener -SqlInstance sql2017a -AvailabilityGroup AG-a\nReturns all listeners found on sql2017a on sql2017a for the availability group AG-a\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaAvailabilityGroup -SqlInstance sql2017a -AvailabilityGroup OPP | Get-DbaAgListener\nReturns all listeners found on sql2017a on sql2017a for the availability group OPP",
        "Syntax":  "Get-DbaAgListener [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-AvailabilityGroup] \u003cString[]\u003e] [[-Listener] \u003cString[]\u003e] [[-InputObject] \u003cAvailabilityGroup[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaAgReplica",
        "Description":  "Returns the availability group replica object found on the server.",
        "Tags":  [
                     "AG",
                     "HA",
                     "AvailabilityGroup",
                     "Replica"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. Server version must be SQL Server version 2012 or higher.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the SqlInstance instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AvailabilityGroup",
                           "Specify the availability groups to query.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Replica",
                           "Return only specific replicas.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Enables piped input from Get-DbaAvailabilityGroup.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Shawn Melton (@wsmelton) | Chrissy LeMaire (@cl)",
        "Synopsis":  "Returns the availability group replica object found on the server.",
        "Name":  "Get-DbaAgReplica",
        "Links":  "https://dbatools.io/Get-DbaAgReplica",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaAgReplica -SqlInstance sql2017a\nReturns basic information on all the availability group replicas found on sql2017a\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaAgReplica -SqlInstance sql2017a -AvailabilityGroup SharePoint\nShows basic information on the replicas found on availability group SharePoint on sql2017a\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaAgReplica -SqlInstance sql2017a | Select-Object *\nReturns full object properties on all availability group replicas found on sql2017a",
        "Syntax":  "Get-DbaAgReplica [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-AvailabilityGroup] \u003cString[]\u003e] [[-Replica] \u003cString[]\u003e] [[-InputObject] \u003cAvailabilityGroup[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaAvailabilityGroup",
        "Description":  "Returns availability group objects from a SQL Server instance.\n\nDefault view provides most common set of properties for information on the Availability Group(s).",
        "Tags":  [
                     "Hadr",
                     "HA",
                     "AG",
                     "AvailabilityGroup"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2012 or higher.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AvailabilityGroup",
                           "Return only specific availability groups.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "IsPrimary",
                           "If this switch is enabled, a boolean indicating whether SqlInstance is the Primary replica in the AG is returned.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Shawn Melton (@wsmelton) | Chrissy LeMaire (@cl)",
        "Synopsis":  "Returns availability group objects from a SQL Server instance.",
        "Name":  "Get-DbaAvailabilityGroup",
        "Links":  "https://dbatools.io/Get-DbaAvailabilityGroup",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaAvailabilityGroup -SqlInstance sqlserver2014a\nReturns basic information on all the Availability Group(s) found on sqlserver2014a.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaAvailabilityGroup -SqlInstance sqlserver2014a -AvailabilityGroup AG-a\nShows basic information on the Availability Group AG-a on sqlserver2014a.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaAvailabilityGroup -SqlInstance sqlserver2014a | Select *\nReturns full object properties on all Availability Group(s) on sqlserver2014a.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaAvailabilityGroup -SqlInstance sqlserver2014a | Select-Object -ExpandProperty PrimaryReplicaServerName\nReturns the SQL Server instancename of the primary replica as a string\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eGet-DbaAvailabilityGroup -SqlInstance sqlserver2014a -AvailabilityGroup AG-a -IsPrimary\nReturns true/false if the server, sqlserver2014a, is the primary replica for AG-a Availability Group.",
        "Syntax":  "Get-DbaAvailabilityGroup [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-AvailabilityGroup] \u003cString[]\u003e] [-IsPrimary] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaAvailableCollation",
        "Description":  "The Get-DbaAvailableCollation function returns the list of collations available on each SQL Server.\nOnly the connect permission is required to get this information.",
        "Tags":  [
                     "Collation",
                     "Configuration"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "TThe target SQL Server instance or instances. Only connect permission is required.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Bryan Hamby (@galador)",
        "Synopsis":  "Function to get available collations for a given SQL Server",
        "Name":  "Get-DbaAvailableCollation",
        "Links":  "https://dbatools.io/Get-DbaAvailableCollation",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaAvailableCollation -SqlInstance sql2016\nGets all the collations from server sql2016 using NT authentication",
        "Syntax":  "Get-DbaAvailableCollation [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaBackupDevice",
        "Description":  "The Get-DbaBackupDevice command gets SQL Backup Device information for each instance(s) of SQL Server.",
        "Tags":  "Backup",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function\r\nto be executed against multiple SQL Server instances.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Garry Bargsley (@gbargsley), http://blog.garrybargsley.com",
        "Synopsis":  "Gets SQL Backup Device information for each instance(s) of SQL Server.",
        "Name":  "Get-DbaBackupDevice",
        "Links":  "https://dbatools.io/Get-DbaBackupDevice",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaBackupDevice -SqlInstance localhost\nReturns all Backup Devices on the local default SQL Server instance\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaBackupDevice -SqlInstance localhost, sql2016\nReturns all Backup Devices for the local and sql2016 SQL Server instances",
        "Syntax":  "Get-DbaBackupDevice [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaBackupHistory",
        "Description":  "Returns backup history details for some or all databases on a SQL Server.\n\nYou can even get detailed information (including file path) for latest full, differential and log files.\n\nBackups taken with the CopyOnly option will NOT be returned, unless the IncludeCopyOnly switch is present\n\nReference: http://www.sqlhub.com/2011/07/find-your-backup-history-in-sql-server.html",
        "Tags":  [
                     "DisasterRecovery",
                     "Backup"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Credential object used to connect to the SQL Server Instance as a different user. This can be a Windows or SQL Server account. Windows users are determined by the existence of a backslash, so if you \r\nare intending to use an alternative Windows connection instead of a SQL login, ensure it contains a backslash.",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Specifies one or more database(s) to process. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "Specifies one or more database(s) to exclude from processing.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "IncludeCopyOnly",
                           "By default Get-DbaBackupHistory will ignore backups taken with the CopyOnly option. This switch will include them",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Force",
                           "If this switch is enabled, a large amount of information is returned, similar to what SQL Server itself returns.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Since",
                           "Specifies a DateTime object to use as the starting point for the search for backups.",
                           "",
                           false,
                           "false",
                           "(Get-Date \u002701/01/1970\u0027)"
                       ],
                       [
                           "RecoveryFork",
                           "Specifies the Recovery Fork you want backup history for",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Last",
                           "If this switch is enabled, the most recent full chain of full, diff and log backup sets is returned.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "LastFull",
                           "If this switch is enabled, the most recent full backup set is returned.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "LastDiff",
                           "If this switch is enabled, the most recent differential backup set is returned.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "LastLog",
                           "If this switch is enabled, the most recent log backup is returned.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "DeviceType",
                           "Specifies a filter for backup sets based on DeviceTypes. Valid options are \u0027Disk\u0027,\u0027Permanent Disk Device\u0027, \u0027Tape\u0027, \u0027Permanent Tape Device\u0027,\u0027Pipe\u0027,\u0027Permanent Pipe Device\u0027,\u0027Virtual Device\u0027, in addition \r\nto custom integers for your own DeviceTypes.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Raw",
                           "If this switch is enabled, one object per backup file is returned. Otherwise, media sets (striped backups across multiple files) will be grouped into a single return object.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "LastLsn",
                           "Specifies a minimum LSN to use in filtering backup history. Only backups with an LSN greater than this value will be returned, which helps speed the retrieval process.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Type",
                           "Specifies one or more types of backups to return. Valid options are \u0027Full\u0027, \u0027Log\u0027, \u0027Differential\u0027, \u0027File\u0027, \u0027Differential File\u0027, \u0027Partial Full\u0027, and \u0027Partial Differential\u0027. Otherwise, all types of \r\nbackups will be returned unless one of the -Last* switches is enabled.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl) | Stuart Moore (@napalmgram)",
        "Synopsis":  "Returns backup history details for databases on a SQL Server.",
        "Name":  "Get-DbaBackupHistory",
        "Links":  "https://dbatools.io/Get-DbaBackupHistory",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaBackupHistory -SqlInstance SqlInstance2014a\nReturns server name, database, username, backup type, date for all database backups still in msdb history on SqlInstance2014a. This may return many rows; consider using filters that are included in \r\nother examples.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e$cred = Get-Credential sqladmin\nGet-DbaBackupHistory -SqlInstance SqlInstance2014a -SqlCredential $cred\nDoes the same as above but connect to SqlInstance2014a as SQL user \"sqladmin\"\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaBackupHistory -SqlInstance SqlInstance2014a -Database db1, db2 -Since \u00272016-07-01 10:47:00\u0027\nReturns backup information only for databases db1 and db2 on SqlInstance2014a since July 1, 2016 at 10:47 AM.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaBackupHistory -SqlInstance sql2014 -Database AdventureWorks2014, pubs -Force | Format-Table\nReturns information only for AdventureWorks2014 and pubs and formats the results as a table.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eGet-DbaBackupHistory -SqlInstance sql2014 -Database AdventureWorks2014 -Last\nReturns information about the most recent full, differential and log backups for AdventureWorks2014 on sql2014.\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eGet-DbaBackupHistory -SqlInstance sql2014 -Database AdventureWorks2014 -Last -DeviceType Disk\nReturns information about the most recent full, differential and log backups for AdventureWorks2014 on sql2014, but only for backups to disk.\n-------------------------- EXAMPLE 7 --------------------------\nPS C:\\\u003eGet-DbaBackupHistory -SqlInstance sql2014 -Database AdventureWorks2014 -Last -DeviceType 148,107\nReturns information about the most recent full, differential and log backups for AdventureWorks2014 on sql2014, but only for backups with device_type 148 and 107.\n-------------------------- EXAMPLE 8 --------------------------\nPS C:\\\u003eGet-DbaBackupHistory -SqlInstance sql2014 -Database AdventureWorks2014 -LastFull\nReturns information about the most recent full backup for AdventureWorks2014 on sql2014.\n-------------------------- EXAMPLE 9 --------------------------\nPS C:\\\u003eGet-DbaBackupHistory -SqlInstance sql2014 -Database AdventureWorks2014 -Type Full\nReturns information about all Full backups for AdventureWorks2014 on sql2014.\n-------------------------- EXAMPLE 10 --------------------------\nPS C:\\\u003eGet-DbaCmsRegServer -SqlInstance sql2016 | Get-DbaBackupHistory\nReturns database backup information for every database on every server listed in the Central Management Server on sql2016.\n-------------------------- EXAMPLE 11 --------------------------\nPS C:\\\u003eGet-DbaBackupHistory -SqlInstance SqlInstance2014a, sql2016 -Force\nReturns detailed backup history for all databases on SqlInstance2014a and sql2016.\n-------------------------- EXAMPLE 12 --------------------------\nPS C:\\\u003eGet-DbaBackupHistory -SqlInstance sql2016 -Database db1 -RecoveryFork 38e5e84a-3557-4643-a5d5-eed607bef9c6 -Last\nIf db1 has multiple recovery forks, specifying the RecoveryFork GUID will restrict the search to that fork.",
        "Syntax":  "Get-DbaBackupHistory -SqlInstance \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Database \u003cObject[]\u003e] [-ExcludeDatabase \u003cObject[]\u003e] [-IncludeCopyOnly] [-Since \u003cDateTime\u003e] [-RecoveryFork \u003cString\u003e] [-DeviceType \u003cString[]\u003e] [-Raw] [-LastLsn \u003cBigInteger\u003e] [-Type \u003cString[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]\nGet-DbaBackupHistory -SqlInstance \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Database \u003cObject[]\u003e] [-ExcludeDatabase \u003cObject[]\u003e] [-IncludeCopyOnly] [-Force] [-Since \u003cDateTime\u003e] [-RecoveryFork \u003cString\u003e] [-DeviceType \u003cString[]\u003e] [-Raw] [-LastLsn \u003cBigInteger\u003e] [-Type \u003cString[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]\nGet-DbaBackupHistory -SqlInstance \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Database \u003cObject[]\u003e] [-ExcludeDatabase \u003cObject[]\u003e] [-IncludeCopyOnly] [-Since \u003cDateTime\u003e] [-RecoveryFork \u003cString\u003e] [-Last] [-LastFull] [-LastDiff] [-LastLog] [-DeviceType \u003cString[]\u003e] [-Raw] [-LastLsn \u003cBigInteger\u003e] [-Type \u003cString[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaBackupInformation",
        "Description":  "Upon being passed a list of potential backups files this command will scan the files, select those that contain SQL Server\nbackup sets. It will then filter those files down to a set\n\nThe function defaults to working on a remote instance. This means that all paths passed in must be relative to the remote instance.\nXpDirTree will be used to perform the file scans\n\nVarious means can be used to pass in a list of files to be considered. The default is to non recursively scan the folder\npassed in.",
        "Tags":  [
                     "DisasterRecovery",
                     "Backup",
                     "Restore"
                 ],
        "Params":  [
                       [
                           "Path",
                           "Path to SQL Server backup files.\nPaths passed in as strings will be scanned using the desired method, default is a non recursive folder scan\r\nAccepts multiple paths separated by \u0027,\u0027\nOr it can consist of FileInfo objects, such as the output of Get-ChildItem or Get-Item. This allows you to work with\r\nyour own file structures as needed",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlInstance",
                           "The SQL Server instance to be used to read the headers of the backup files",
                           "ServerInstance,SqlServer",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to login to servers using SQL Logins as opposed to Windows Auth/Integrated/Trusted.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "DatabaseName",
                           "An array of Database Names to filter by. If empty all databases are returned.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SourceInstance",
                           "If provided only backup originating from this destination will be returned. This SQL instance will not be connected to or involved in this work",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "NoXpDirTree",
                           "If this switch is set, then Files will be parsed as locally files. This can cause failures if the running user can see files that the parsing SQL Instance cannot",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "DirectoryRecurse",
                           "If specified the provided path/directory will be traversed (only applies if not using XpDirTree)",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "Replaces user friendly yellow warnings with bloody red exceptions of doom!\r\nUse this if you want the function to throw terminating errors you want to catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "MaintenanceSolution",
                           "This switch tells the function that the folder is the root of a Ola Hallengren backup folder",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "IgnoreLogBackup",
                           "This switch only works with the MaintenanceSolution switch. With an Ola Hallengren style backup we can be sure that the LOG folder contains only log backups and skip it.\r\nFor all other scenarios we need to read the file headers to be sure.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "ExportPath",
                           "If specified the output will export via CliXml format to the specified file. This allows you to store the backup history object for later usage, or move it between computers",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AzureCredential",
                           "The name of the SQL Server credential to be used if restoring from an Azure hosted backup",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Import",
                           "When specified along with a path the command will import a previously exported BackupHistory object from an xml file.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Anonymise",
                           "If specified we will output the results with ComputerName, InstanceName, Database, UserName, Paths, and Logical and Physical Names hashed out\r\nThis options is mainly for use if we need you to submit details for fault finding to the dbatools team",
                           "Anonymize",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "NoClobber",
                           "If specified will stop Export from overwriting an existing file, the default is to overwrite",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "PassThru",
                           "When data is exported the cmdlet will return no other output, this switch means it will also return the normal output which can be then piped into another command",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl) | Stuart Moore (@napalmgram)",
        "Synopsis":  "Scan backup files and creates a set, compatible with Restore-DbaDatabase",
        "Name":  "Get-DbaBackupInformation",
        "Links":  "https://dbatools.io/Get-DbaBackupInformation",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaBackupInformation -SqlInstance Server1 -Path c:\\backups\\ -DirectoryRecurse\nWill use the Server1 instance to recursively read all backup files under c:\\backups, and return a dbatools BackupHistory object\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaBackupInformation -SqlInstance Server1 -Path c:\\backups\\ -DirectoryRecurse -ExportPath c:\\store\\BackupHistory.xml\nPS C:\\\u003e robocopy c:\\store\\ \\\\remoteMachine\\C$\\store\\ BackupHistory.xml\r\nPS C:\\\u003e Get-DbaBackupInformation -Import -Path  c:\\store\\BackupHistory.xml | Restore-DbaDatabase -SqlInstance Server2 -TrustDbBackupHistory\nThis example creates backup history output from server1 and copies the file to the remote machine in order to preserve backup history. It is then used to restore the databases onto server2.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaBackupInformation -SqlInstance Server1 -Path c:\\backups\\ -DirectoryRecurse -ExportPath C:\\store\\BackupHistory.xml -PassThru | Restore-DbaDatabase -SqlInstance Server2 \r\n-TrustDbBackupHistory\nIn this example we gather backup information, export it to an xml file, and then pass it on through to Restore-DbaDatabase.\r\nThis allows us to repeat the restore without having to scan all the backup files again\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-ChildItem c:\\backups\\ -recurse -files | Where-Object {$_.extension -in (\u0027.bak\u0027,\u0027.trn\u0027) -and $_.LastWriteTime -gt (get-date).AddMonths(-1)} | Get-DbaBackupInformation -SqlInstance Server1 \r\n-ExportPath C:\\backupHistory.xml\nThis lets you keep a record of all backup history from the last month on hand to speed up refreshes\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003e$Backups = Get-DbaBackupInformation -SqlInstance Server1 -Path \\\\network\\backups\nPS C:\\\u003e $Backups += Get-DbaBackupInformation -SqlInstance Server2 -NoXpDirTree -Path c:\\backups\nScan the unc folder \\\\network\\backups with Server1, and then scan the C:\\backups folder on\r\nServer2 not using xp_dirtree, adding the results to the first set.\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003e$Backups = Get-DbaBackupInformation -SqlInstance Server1 -Path \\\\network\\backups -MaintenanceSolution\nWhen MaintenanceSolution is indicated we know we are dealing with the output from Ola Hallengren backup scripts. So we make sure that a FULL folder exists in the first level of Path, if not we \r\nshortcut scanning all the files as we have nothing to work with\n-------------------------- EXAMPLE 7 --------------------------\nPS C:\\\u003e$Backups = Get-DbaBackupInformation -SqlInstance Server1 -Path \\\\network\\backups -MaintenanceSolution -IgnoreLogBackup\nAs we know we are dealing with an Ola Hallengren style backup folder from the MaintenanceSolution switch, when IgnoreLogBackup is also included we can ignore the LOG folder to skip any scanning of \r\nlog backups. Note this also means they WON\u0027T be restored",
        "Syntax":  "Get-DbaBackupInformation -Path \u003cObject[]\u003e -SqlInstance \u003cDbaInstanceParameter\u003e [-SqlCredential \u003cPSCredential\u003e] [-DatabaseName \u003cString[]\u003e] [-SourceInstance \u003cString[]\u003e] [-NoXpDirTree] [-DirectoryRecurse] [-EnableException] [-MaintenanceSolution] [-IgnoreLogBackup] [-ExportPath \u003cString\u003e] [-AzureCredential \u003cString\u003e] [-Anonymise] [-NoClobber] [-PassThru] [\u003cCommonParameters\u003e]\nGet-DbaBackupInformation -Path \u003cObject[]\u003e [-DatabaseName \u003cString[]\u003e] [-SourceInstance \u003cString[]\u003e] [-EnableException] [-MaintenanceSolution] [-IgnoreLogBackup] [-ExportPath \u003cString\u003e] [-AzureCredential \u003cString\u003e] [-Import] [-Anonymise] [-NoClobber] [-PassThru] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaBuildReference",
        "Description":  "Returns info about the specific build of a SQL instance, including the SP, the CU and the reference KB, wherever possible.\nIt also includes End Of Support dates as specified on Microsoft Life Cycle Policy",
        "Tags":  "SqlBuild",
        "Params":  [
                       [
                           "Build",
                           "Instead of connecting to a real instance, pass a string identifying the build to get the info back.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Kb",
                           "Get a KB information based on its number. Supported format: KBXXXXXX, or simply XXXXXX.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "MajorVersion",
                           "Get a KB information based on SQL Server version. Can be refined further by -ServicePack and -CumulativeUpdate parameters.\r\nExamples: SQL2008 | 2008R2 | 2016",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ServicePack",
                           "Get a KB information based on SQL Server Service Pack version. Can be refined further by -CumulativeUpdate parameter.\r\nExamples: SP0 | 2 | RTM",
                           "SP",
                           false,
                           "false",
                           "RTM"
                       ],
                       [
                           "CumulativeUpdate",
                           "Get a KB information based on SQL Server Cumulative Update version.\r\n Examples: CU0 | CU13 | CU0",
                           "CU",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlInstance",
                           "Target any number of instances, in order to return their build state.",
                           "ServerInstance,SqlServer",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "When connecting to an instance, use the credentials specified.",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Update",
                           "Looks online for the most up to date reference, replacing the local one.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Get-DbaSqlBuildReference",
        "Author":  "Simone Bizzotto (@niphold) | Friedrich Weinmann (@FredWeinmann)",
        "Synopsis":  "Returns SQL Server Build infos on a SQL instance",
        "Name":  "Get-DbaBuildReference",
        "Links":  "https://dbatools.io/Get-DbaBuildReference",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaBuildReference -Build \"12.00.4502\"\nReturns information about a build identified by  \"12.00.4502\" (which is SQL 2014 with SP1 and CU11)\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaBuildReference -Build \"12.00.4502\" -Update\nReturns information about a build trying to fetch the most up to date index online. When the online version is newer, the local one gets overwritten\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaBuildReference -Build \"12.0.4502\",\"10.50.4260\"\nReturns information builds identified by these versions strings\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaCmsRegServer -SqlInstance sqlserver2014a | Get-DbaBuildReference\nIntegrate with other cmdlets to have builds checked for all your registered servers on sqlserver2014a",
        "Syntax":  "Get-DbaBuildReference [[-Build] \u003cVersion[]\u003e] [[-Kb] \u003cString[]\u003e] [[-MajorVersion] \u003cString\u003e] [[-ServicePack] \u003cString\u003e] [[-CumulativeUpdate] \u003cString\u003e] [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [-Update] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaClientAlias",
        "Description":  "Gets SQL Server alias by reading HKLM:\\SOFTWARE\\Microsoft\\MSSQLServer\\Client",
        "Tags":  "Alias",
        "Params":  [
                       [
                           "ComputerName",
                           "The target computer where the alias has been created",
                           "",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Allows you to login to remote computers using alternative credentials",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Gets any SQL Server alias for the specified server(s)",
        "Name":  "Get-DbaClientAlias",
        "Links":  "https://dbatools.io/Get-DbaClientAlias",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaClientAlias\nGets all SQL Server client aliases on the local computer\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaClientAlias -ComputerName workstationx\nGets all SQL Server client aliases on Workstationx\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaClientAlias -ComputerName workstationx -Credential ad\\sqldba\nLogs into workstationx as ad\\sqldba then retrieves all SQL Server client aliases on Workstationx\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003e\u0027Server1\u0027, \u0027Server2\u0027 | Get-DbaClientAlias\nGets all SQL Server client aliases on Server1 and Server2",
        "Syntax":  "Get-DbaClientAlias [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaClientProtocol",
        "Description":  "Gets the SQL Server related client protocols on one or more computers.\n\nRequires Local Admin rights on destination computer(s).\nThe client protocols can be enabled and disabled when retrieved via WSMan.",
        "Tags":  "Protocol",
        "Params":  [
                       [
                           "ComputerName",
                           "The target SQL Server instance or instances.",
                           "cn,host,Server",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Credential object used to connect to the computer as a different user.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Klaas Vandenberghe (@PowerDBAKlaas)",
        "Synopsis":  "Gets the SQL Server related client protocols on a computer.",
        "Name":  "Get-DbaClientProtocol",
        "Links":  "https://dbatools.io/Get-DbaClientProtocol",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaClientProtocol -ComputerName sqlserver2014a\nGets the SQL Server related client protocols on computer sqlserver2014a.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e\u0027sql1\u0027,\u0027sql2\u0027,\u0027sql3\u0027 | Get-DbaClientProtocol\nGets the SQL Server related client protocols on computers sql1, sql2 and sql3.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaClientProtocol -ComputerName sql1,sql2 | Out-GridView\nGets the SQL Server related client protocols on computers sql1 and sql2, and shows them in a grid view.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003e(Get-DbaClientProtocol -ComputerName sql2 | Where { $_.DisplayName = \u0027via\u0027 }).Disable()\nDisables the VIA ClientNetworkProtocol on computer sql2.\r\nIf successful, return code 0 is shown.",
        "Syntax":  "Get-DbaClientProtocol [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaCmConnection",
        "Description":  "Retrieves windows management connections from the cache",
        "Tags":  [
                     "ComputerManagement",
                     "CIM"
                 ],
        "Params":  [
                       [
                           "ComputerName",
                           "The computername to ComputerName for.",
                           "Filter",
                           false,
                           "true (ByValue)",
                           "*"
                       ],
                       [
                           "UserName",
                           "Username on credentials to look for. Will not find connections using the default windows credentials.",
                           "",
                           false,
                           "false",
                           "*"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Friedrich Weinmann (@FredWeinmann)",
        "Synopsis":  "Retrieves windows management connections from the cache",
        "Name":  "Get-DbaCmConnection",
        "Links":  "https://dbatools.io/Get-DbaCmConnection",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaCmConnection\nList all cached connections.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaCmConnection sql2014\nList the cached connection - if any - to the server sql2014.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaCmConnection -UserName \"*charles*\"\nList all cached connection that use a username containing \"charles\" as default or override credentials.",
        "Syntax":  "Get-DbaCmConnection [[-ComputerName] \u003cString[]\u003e] [-UserName \u003cString\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaCmObject",
        "Description":  "This function centralizes all requests for information retrieved from Get-WmiObject or Get-CimInstance.\nIt uses different protocols as available in this order:\n- Cim over WinRM\n- Cim over DCOM\n- Wmi\n- Wmi over PowerShell Remoting\nIt remembers channels that didn\u0027t work and will henceforth avoid them. It remembers invalid credentials and will avoid reusing them.\nMuch of its behavior can be configured using Test-DbaCmConnection.",
        "Tags":  [
                     "ComputerManagement",
                     "CIM"
                 ],
        "Params":  [
                       [
                           "ClassName",
                           "The name of the class to retrieve.",
                           "Class",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "Query",
                           "The Wmi/Cim query tu run against the server.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "ComputerName",
                           "The computer(s) to connect to. Defaults to localhost.",
                           "",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Credentials to use. Invalid credentials will be stored in a credentials cache and not be reused.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Namespace",
                           "The namespace of the class to use.",
                           "",
                           false,
                           "false",
                           "root\\cimv2"
                       ],
                       [
                           "DoNotUse",
                           "Connection Protocols that should not be used.",
                           "",
                           false,
                           "false",
                           "None"
                       ],
                       [
                           "Force",
                           "Overrides some checks that might otherwise halt execution as a precaution\r\n- Ignores timeout on bad connections",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "SilentlyContinue",
                           "Use in conjunction with the -EnableException switch.\r\nBy default, Get-DbaCmObject will throw a terminating exception when connecting to a target is impossible in exception enabled mode.\r\nSetting this switch will cause it write a non-terminating exception and continue with the next computer.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Friedrich Weinmann (@FredWeinmann)",
        "Synopsis":  "Retrieves Wmi/Cim-Style information from computers.",
        "Name":  "Get-DbaCmObject",
        "Links":  "https://dbatools.io/Get-DbaCmObject",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaCmObject win32_OperatingSystem\nRetrieves the common operating system information from the local computer.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaCmObject -Computername \"sql2014\" -ClassName Win32_OperatingSystem -Credential $cred -DoNotUse CimRM\nRetrieves the common operating system information from the server sql2014.\r\nIt will use the Credentials stored in $cred to connect, unless they are known to not work, in which case they will default to windows credentials (unless another default has been set).",
        "Syntax":  "Get-DbaCmObject [-ClassName] \u003cString\u003e [-ComputerName \u003cDbaCmConnectionParameter[]\u003e] [-Credential \u003cPSCredential\u003e] [-Namespace \u003cString\u003e] [-DoNotUse {None | CimRM | CimDCOM | Wmi | PowerShellRemoting}] [-Force] [-SilentlyContinue] [-EnableException] [\u003cCommonParameters\u003e]\nGet-DbaCmObject [-Query] \u003cString\u003e [-ComputerName \u003cDbaCmConnectionParameter[]\u003e] [-Credential \u003cPSCredential\u003e] [-Namespace \u003cString\u003e] [-DoNotUse {None | CimRM | CimDCOM | Wmi | PowerShellRemoting}] [-Force] [-SilentlyContinue] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaCmsRegServer",
        "Description":  "Returns an array of servers found in the CMS.",
        "Tags":  [
                     "RegisteredServer",
                     "CMS"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Name",
                           "Specifies one or more names to include. Name is the visible name in SSMS CMS interface (labeled Registered Server Name)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ServerName",
                           "Specifies one or more server names to include. Server Name is the actual instance name (labeled Server Name)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Group",
                           "Specifies one or more groups to include from SQL Server Central Management Server.",
                           "Groups",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeGroup",
                           "Specifies one or more Central Management Server groups to exclude.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Id",
                           "Get server by Id(s)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "IncludeSelf",
                           "If this switch is enabled, the CMS server itself will be included in the results, along with all other Registered Servers.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "ExcludeCmsServer",
                           "Deprecated, now follows the Microsoft convention of not including it by default. If you\u0027d like to include the CMS Server, use -IncludeSelf",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "ResolveNetworkName",
                           "If this switch is enabled, the NetBIOS name and IP address(es) of each server will be returned.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Get-DbaCmsRegServerName,Get-DbaRegisteredServer,Get-SqlRegisteredServerName",
        "Author":  "Bryan Hamby (@galador)",
        "Synopsis":  "Gets list of SQL Server objects stored in SQL Server Central Management Server (CMS).",
        "Name":  "Get-DbaCmsRegServer",
        "Links":  "https://dbatools.io/Get-DbaCmsRegServer",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaCmsRegServer -SqlInstance sqlserver2014a\nGets a list of servers from the CMS on sqlserver2014a, using Windows Credentials.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaCmsRegServer -SqlInstance sqlserver2014a -IncludeSelf\nGets a list of servers from the CMS on sqlserver2014a and includes sqlserver2014a in the output results.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaCmsRegServer -SqlInstance sqlserver2014a -SqlCredential $credential | Select-Object -Unique -ExpandProperty ServerName\nReturns only the server names from the CMS on sqlserver2014a, using SQL Authentication to authenticate to the server.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaCmsRegServer -SqlInstance sqlserver2014a -Group HR, Accounting\nGets a list of servers in the HR and Accounting groups from the CMS on sqlserver2014a.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eGet-DbaCmsRegServer -SqlInstance sqlserver2014a -Group HR\\Development\nReturns a list of servers in the HR and sub-group Development from the CMS on sqlserver2014a.",
        "Syntax":  "Get-DbaCmsRegServer [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Name] \u003cString[]\u003e] [[-ServerName] \u003cString[]\u003e] [[-Group] \u003cObject[]\u003e] [[-ExcludeGroup] \u003cObject[]\u003e] [[-Id] \u003cInt32[]\u003e] [-IncludeSelf] [-ExcludeCmsServer] [-ResolveNetworkName] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaCmsRegServerGroup",
        "Description":  "Returns an array of Server Groups found in the CMS.",
        "Tags":  [
                     "RegisteredServer",
                     "CMS"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Group",
                           "Specifies one or more groups to include from SQL Server Central Management Server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeGroup",
                           "Specifies one or more Central Management Server groups to exclude.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Id",
                           "Get group by Id(s). This parameter only works if the group has a registered server in it.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Get-DbaRegisteredServerGroup",
        "Author":  "Tony Wilhelm (@tonywsql)",
        "Synopsis":  "Gets list of Server Groups objects stored in SQL Server Central Management Server (CMS).",
        "Name":  "Get-DbaCmsRegServerGroup",
        "Links":  "https://dbatools.io/Get-DbaCmsRegServerGroup",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaCmsRegServerGroup -SqlInstance sqlserver2014a\nGets the top level groups from the CMS on sqlserver2014a, using Windows Credentials.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaCmsRegServerGroup -SqlInstance sqlserver2014a -SqlCredential $credential\nGets the top level groups from the CMS on sqlserver2014a, using alternative credentials to authenticate to the server.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaCmsRegServerGroup -SqlInstance sqlserver2014a -Group HR, Accounting\nGets the HR and Accounting groups from the CMS on sqlserver2014a.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaCmsRegServerGroup -SqlInstance sqlserver2014a -Group HR\\Development\nReturns the sub-group Development of the HR group from the CMS on sqlserver2014a.",
        "Syntax":  "Get-DbaCmsRegServerGroup [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Group] \u003cObject[]\u003e] [[-ExcludeGroup] \u003cObject[]\u003e] [[-Id] \u003cInt32[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaCmsRegServerStore",
        "Description":  "Returns a SQL Server Registered Server Store object - useful for working with Central Management Store",
        "Tags":  [
                     "RegisteredServer",
                     "CMS"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function\r\nto be executed against multiple SQL Server instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Get-DbaRegisteredServerStore",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Returns a SQL Server Registered Server Store Object",
        "Name":  "Get-DbaCmsRegServerStore",
        "Links":  "https://dbatools.io/Get-DbaCmsRegServerStore",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaCmsRegServerStore -SqlInstance sqlserver2014a\nReturns a SQL Server Registered Server Store Object from sqlserver2014a\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaCmsRegServerStore -SqlInstance sqlserver2014a -SqlCredential sqladmin\nReturns a SQL Server Registered Server Store Object from sqlserver2014a  by logging in with the sqladmin login",
        "Syntax":  "Get-DbaCmsRegServerStore [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaComputerCertificate",
        "Description":  "Gets computer certificates on localhost that are candidates for using with SQL Server\u0027s network encryption",
        "Tags":  "Certificate",
        "Params":  [
                       [
                           "ComputerName",
                           "The target SQL Server instance or instances. Defaults to localhost. If target is a cluster, you must specify the distinct nodes.",
                           "ServerInstance,SqlServer,SqlInstance",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Allows you to login to $ComputerName using alternative credentials.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Store",
                           "Certificate store - defaults to LocalMachine",
                           "",
                           false,
                           "false",
                           "LocalMachine"
                       ],
                       [
                           "Folder",
                           "Certificate folder - defaults to My (Personal)",
                           "",
                           false,
                           "false",
                           "My"
                       ],
                       [
                           "Path",
                           "The path to a certificate - basically changes the path into a certificate object",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Thumbprint",
                           "Return certificate based on thumbprint",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Simplifies finding computer certificates that are candidates for using with SQL Server\u0027s network encryption",
        "Name":  "Get-DbaComputerCertificate",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaComputerCertificate\nGets computer certificates on localhost that are candidates for using with SQL Server\u0027s network encryption\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaComputerCertificate -ComputerName sql2016\nGets computer certificates on sql2016 that are candidates for using with SQL Server\u0027s network encryption\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaComputerCertificate -ComputerName sql2016 -Thumbprint 8123472E32AB412ED4288888B83811DB8F504DED, 04BFF8B3679BB01A986E097868D8D494D70A46D6\nGets computer certificates on sql2016 that match thumbprints 8123472E32AB412ED4288888B83811DB8F504DED or 04BFF8B3679BB01A986E097868D8D494D70A46D6",
        "Syntax":  "Get-DbaComputerCertificate [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [[-Store] \u003cString\u003e] [[-Folder] \u003cString\u003e] [[-Path] \u003cString\u003e] [[-Thumbprint] \u003cString[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaComputerSystem",
        "Description":  "Gets computer system information from the server and returns as an object.",
        "Tags":  "ServerInfo",
        "Params":  [
                       [
                           "ComputerName",
                           "Target computer(s). If no computer name is specified, the local computer is targeted",
                           "cn,host,Server",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Alternate credential object to use for accessing the target computer(s).",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "IncludeAws",
                           "If computer is hosted in AWS Infrastructure as a Service (IaaS), additional information will be included.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Shawn Melton (@wsmelton), https://wsmelton.github.io",
        "Synopsis":  "Gets computer system information from the server.",
        "Name":  "Get-DbaComputerSystem",
        "Links":  "https://dbatools.io/Get-DbaComputerSystem",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaComputerSystem\nReturns information about the local computer\u0027s computer system\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaComputerSystem -ComputerName sql2016\nReturns information about the sql2016\u0027s computer system\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaComputerSystem -ComputerName sql2016 -IncludeAws\nReturns information about the sql2016\u0027s computer system and includes additional properties around the EC2 instance.",
        "Syntax":  "Get-DbaComputerSystem [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [-IncludeAws] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaConnection",
        "Description":  "Returns a bunch of information from dm_exec_connections which, according to Microsoft:\n\"Returns information about the connections established to this instance of SQL Server and the details of each connection. Returns server wide connection information for SQL Server. Returns current database connection information for SQL Database.\"",
        "Tags":  "Connection",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. Server(s) must be SQL Server 2005 or higher.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "Credential,Cred",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Returns a bunch of information from dm_exec_connections.",
        "Name":  "Get-DbaConnection",
        "Links":  "https://dbatools.io/Get-DbaConnection",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaConnection -SqlInstance sql2016, sql2017\nReturns client connection information from sql2016 and sql2017",
        "Syntax":  "Get-DbaConnection [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaCpuRingBuffer",
        "Description":  "This command is based off of Glen Berry\u0027s diagnostic query for average CPU\n\nThe sys.dm_os_ring_buffers stores the average CPU utilization history\nby the current instance of SQL Server, plus the summed average CPU utilization\nby all other processes on your machine are captured in one minute increments\nfor the past 256 minutes.\n\nReference: https://www.sqlskills.com/blogs/glenn/sql-server-diagnostic-information-queries-detailed-day-16//",
        "Tags":  "CPU",
        "Params":  [
                       [
                           "SqlInstance",
                           "Allows you to specify a comma separated list of servers to query.",
                           "ServerInstance,SqlServer,SqlServers",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to login to servers using SQL Logins as opposed to Windows Auth/Integrated/Trusted. To use:\r\n$cred = Get-Credential, this pass this $cred to the param.\nWindows Authentication will be used if DestinationSqlCredential is not specified. To connect as a different Windows user, run PowerShell as that user.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "CollectionMinutes",
                           "Allows you to specify a Collection Period in Minutes. Default is 60 minutes",
                           "",
                           false,
                           "false",
                           "60"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Patrick Flynn (@sqllensman)",
        "Synopsis":  "Collects CPU data from sys.dm_os_ring_buffers.  Works on SQL Server 2005 and above.",
        "Name":  "Get-DbaCpuRingBuffer",
        "Links":  "https://dbatools.io/Get-DbaCpuRingBuffer",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaCpuRingBuffer -SqlInstance sql2008, sqlserver2012\nGets CPU Statistics from sys.dm_os_ring_buffers for servers sql2008 and sqlserver2012 for last 60 minutes.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaCpuRingBuffer -SqlInstance sql2008 -CollectionMinutes 240\nGets CPU Statistics from sys.dm_os_ring_buffers for server sql2008 for last 240 minutes\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003e$output = Get-DbaCpuRingBuffer -SqlInstance sql2008 -CollectionMinutes 240 | Select * | ConvertTo-DbaDataTable\nGets CPU Statistics from sys.dm_os_ring_buffers for server sql2008 for last 240 minutes into a Data Table.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003e\u0027sql2008\u0027,\u0027sql2012\u0027 | Get-DbaCpuRingBuffer\nGets CPU Statistics from sys.dm_os_ring_buffers for servers sql2008 and sqlserver2012\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003e$cred = Get-Credential sqladmin\nPS C:\\\u003e Get-DbaCpuRingBuffer -SqlInstance sql2008 -SqlCredential $cred\nConnects using sqladmin credential and returns CPU Statistics from sys.dm_os_ring_buffers from sql2008",
        "Syntax":  "Get-DbaCpuRingBuffer [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-CollectionMinutes] \u003cInt32\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaCpuUsage",
        "Description":  "\"If there are a lot of processes running on your instance and the CPU is very high,\nthen it\u0027s hard to find the exact process eating up your CPU using just the SQL Server\ntools. One way to correlate the data between what is running within SQL Server and at\nthe Windows level is to use SPID and KPID values to get the exact process.\"\n\nThis command automates that process.\n\nReferences: https://www.mssqltips.com/sqlservertip/2454/how-to-find-out-how-much-cpu-a-sql-server-process-is-really-using/\n\nNote: This command returns results from all SQL instances on the destination server but the process\ncolumn is specific to -SqlInstance passed.",
        "Tags":  "CPU",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer,SqlServers",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to login to the SQL instance using alternative credentials.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Credential",
                           "Allows you to login to the Windows Server using alternative credentials.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Threshold",
                           "CPU threshold.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Provides detailed CPU usage information about a SQL Server\u0027s process",
        "Name":  "Get-DbaCpuUsage",
        "Links":  "https://dbatools.io/Get-DbaCpuUsage",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaCpuUsage -SqlInstance sql2017\nLogs into the SQL Server instance \"sql2017\" and also the Computer itself (via WMI) to gather information\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e$usage = Get-DbaCpuUsage -SqlInstance sql2017\nPS C:\\\u003e $usage.Process\nExplores the processes (from Get-DbaProcess) associated with the usage results\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaCpuUsage -SqlInstance sql2017 -SqlCredential sqladmin -Credential ad\\sqldba\nLogs into the SQL instance using the SQL Login \u0027sqladmin\u0027 and then Windows instance as \u0027ad\\sqldba\u0027",
        "Syntax":  "Get-DbaCpuUsage [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Credential] \u003cPSCredential\u003e] [[-Threshold] \u003cInt32\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaCredential",
        "Description":  "The Get-DbaCredential command gets SQL Credential information for each instance(s) of SQL Server.",
        "Tags":  "Credential",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function\r\nto be executed against multiple SQL Server instances.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Name",
                           "Only include specific names\r\nNote: if spaces exist in the credential name, you will have to type \"\" or \u0027\u0027 around it.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeName",
                           "Excluded credential names",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Identity",
                           "Only include specific identities\r\nNote: if spaces exist in the credential identity, you will have to type \"\" or \u0027\u0027 around it.",
                           "CredentialIdentity",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeIdentity",
                           "Excluded identities",
                           "ExcludeCredentialIdentity",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Garry Bargsley (@gbargsley), http://blog.garrybargsley.com",
        "Synopsis":  "Gets SQL Credential information for each instance(s) of SQL Server.",
        "Name":  "Get-DbaCredential",
        "Links":  "https://dbatools.io/Get-DbaCredential",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaCredential -SqlInstance localhost\nReturns all SQL Credentials on the local default SQL Server instance\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaCredential -SqlInstance localhost, sql2016 -Name \u0027PowerShell Proxy\u0027\nReturns the SQL Credentials named \u0027PowerShell Proxy\u0027 for the local and sql2016 SQL Server instances\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaCredential -SqlInstance localhost, sql2016 -Identity ad\\powershell\nReturns the SQL Credentials for the account \u0027ad\\powershell\u0027 on the local and sql2016 SQL Server instances",
        "Syntax":  "Get-DbaCredential [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Name \u003cString[]\u003e] [-ExcludeName \u003cString[]\u003e] [-Identity \u003cString[]\u003e] [-ExcludeIdentity \u003cString[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaCustomError",
        "Description":  "The Get-DbaCustomError command gets SQL Custom Error Message information for each instance(s) of SQL Server.",
        "Tags":  [
                     "Error",
                     "CustomError"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function\r\nto be executed against multiple SQL Server instances.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Garry Bargsley (@gbargsley), http://blog.garrybargsley.com",
        "Synopsis":  "Gets SQL Custom Error Message information for each instance(s) of SQL Server.",
        "Name":  "Get-DbaCustomError",
        "Links":  "https://dbatools.io/Get-DbaCustomError",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaCustomError -SqlInstance localhost\nReturns all Custom Error Message(s) on the local default SQL Server instance\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaCustomError -SqlInstance localhost, sql2016\nReturns all Custom Error Message(s) for the local and sql2016 SQL Server instances",
        "Syntax":  "Get-DbaCustomError [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDatabase",
        "Description":  "The Get-DbaDatabase command gets SQL database information for each database that is present on the target instance(s) of\nSQL Server. If the name of the database is provided, the command will return only the specific database information.",
        "Tags":  "Database",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. Defaults to localhost.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Specifies one or more database(s) to process. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "Specifies one or more database(s) to exclude from processing.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeUser",
                           "If this switch is enabled, only databases which are not User databases will be processed.\nThis parameter cannot be used with -ExcludeSystem.",
                           "SystemDbOnly,NoUserDb,ExcludeAllUserDb",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "ExcludeSystem",
                           "If this switch is enabled, only databases which are not System databases will be processed.\nThis parameter cannot be used with -ExcludeUser.",
                           "UserDbOnly,NoSystemDb,ExcludeAllSystemDb",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Owner",
                           "Specifies one or more database owners. Only databases owned by the listed owner(s) will be returned.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Encrypted",
                           "If this switch is enabled, only databases which have Transparent Data Encryption (TDE) enabled will be returned.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Status",
                           "Specifies one or more database statuses to filter on. Only databases in the status(es) listed will be returned. Valid options for this parameter are \u0027Emergency\u0027, \u0027Normal\u0027, \u0027Offline\u0027, \u0027Recovering\u0027, \r\n\u0027Restoring\u0027, \u0027Standby\u0027, and \u0027Suspect\u0027.",
                           "",
                           false,
                           "false",
                           "@(\u0027EmergencyMode\u0027, \u0027Normal\u0027, \u0027Offline\u0027, \u0027Recovering\u0027, \u0027Restoring\u0027, \u0027Standby\u0027, \u0027Suspect\u0027)"
                       ],
                       [
                           "Access",
                           "Filters databases returned by their access type. Valid options for this parameter are \u0027ReadOnly\u0027 and \u0027ReadWrite\u0027. If omitted, no filtering is performed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "RecoveryModel",
                           "Filters databases returned by their recovery model. Valid options for this parameter are \u0027Full\u0027, \u0027Simple\u0027, and \u0027BulkLogged\u0027.",
                           "",
                           false,
                           "false",
                           "@(\u0027Full\u0027, \u0027Simple\u0027, \u0027BulkLogged\u0027)"
                       ],
                       [
                           "NoFullBackup",
                           "If this switch is enabled, only databases without a full backup recorded by SQL Server will be returned. This will also indicate which of these databases only have CopyOnly full backups.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "NoFullBackupSince",
                           "Only databases which haven\u0027t had a full backup since the specified DateTime will be returned.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "NoLogBackup",
                           "If this switch is enabled, only databases without a log backup recorded by SQL Server will be returned. This will also indicate which of these databases only have CopyOnly log backups.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "NoLogBackupSince",
                           "Only databases which haven\u0027t had a log backup since the specified DateTime will be returned.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "IncludeLastUsed",
                           "If this switch is enabled, the last used read \u0026 write times for each database will be returned. This data is retrieved from sys.dm_db_index_usage_stats which is reset when SQL Server is restarted.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "OnlyAccessible",
                           "If this switch is enabled, only accessible databases are returned (huge speedup in SMO enumeration)",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Garry Bargsley (@gbargsley), http://blog.garrybargsley.com | Klaas Vandenberghe (@PowerDbaKlaas) | Simone Bizzotto ( @niphlod )",
        "Synopsis":  "Gets SQL Database information for each database that is present on the target instance(s) of SQL Server.",
        "Name":  "Get-DbaDatabase",
        "Links":  "https://dbatools.io/Get-DbaDatabase",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDatabase -SqlInstance localhost\nReturns all databases on the local default SQL Server instance.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDatabase -SqlInstance localhost -ExcludeUser\nReturns only the system databases on the local default SQL Server instance.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaDatabase -SqlInstance localhost -ExcludeSystem\nReturns only the user databases on the local default SQL Server instance.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003e\u0027localhost\u0027,\u0027sql2016\u0027 | Get-DbaDatabase\nReturns databases on multiple instances piped into the function.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eGet-DbaDatabase -SqlInstance SQL1\\SQLExpress -RecoveryModel full,Simple\nReturns only the user databases in Full or Simple recovery model from SQL Server instance SQL1\\SQLExpress.\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eGet-DbaDatabase -SqlInstance SQL1\\SQLExpress -Status Normal\nReturns only the user databases with status \u0027normal\u0027 from SQL Server instance SQL1\\SQLExpress.\n-------------------------- EXAMPLE 7 --------------------------\nPS C:\\\u003eGet-DbaDatabase -SqlInstance SQL1\\SQLExpress -IncludeLastUsed\nReturns the databases from SQL Server instance SQL1\\SQLExpress and includes the last used information\r\nfrom the sys.dm_db_index_usage_stats DMV.\n-------------------------- EXAMPLE 8 --------------------------\nPS C:\\\u003eGet-DbaDatabase -SqlInstance SQL1\\SQLExpress,SQL2 -ExcludeDatabase model,master\nReturns all databases except master and model from SQL Server instances SQL1\\SQLExpress and SQL2.\n-------------------------- EXAMPLE 9 --------------------------\nPS C:\\\u003eGet-DbaDatabase -SqlInstance SQL1\\SQLExpress,SQL2 -Encrypted\nReturns only databases using TDE from SQL Server instances SQL1\\SQLExpress and SQL2.\n-------------------------- EXAMPLE 10 --------------------------\nPS C:\\\u003eGet-DbaDatabase -SqlInstance SQL1\\SQLExpress,SQL2 -Access ReadOnly\nReturns only read only databases from SQL Server instances SQL1\\SQLExpress and SQL2.\n-------------------------- EXAMPLE 11 --------------------------\nPS C:\\\u003eGet-DbaDatabase -SqlInstance SQL2,SQL3 -Database OneDB,OtherDB\nReturns databases \u0027OneDb\u0027 and \u0027OtherDB\u0027 from SQL Server instances SQL2 and SQL3 if databases by those names exist on those instances.",
        "Syntax":  "Get-DbaDatabase [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Database \u003cObject[]\u003e] [-ExcludeDatabase \u003cObject[]\u003e] [-ExcludeUser] [-ExcludeSystem] [-Owner \u003cString[]\u003e] [-Encrypted] [-Status \u003cString[]\u003e] [-Access \u003cString\u003e] [-RecoveryModel \u003cString[]\u003e] [-NoFullBackup] [-NoFullBackupSince \u003cDateTime\u003e] [-NoLogBackup] [-NoLogBackupSince \u003cDateTime\u003e] [-EnableException] [-IncludeLastUsed] [-OnlyAccessible] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbAssembly",
        "Description":  "The Get-DbaDbAssembly command gets SQL Database Assembly information for each instance(s) of SQL Server.",
        "Tags":  [
                     "Assembly",
                     "Database"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function\r\nto be executed against multiple SQL Server instances.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Get-DbaDatabaseAssembly",
        "Author":  "Garry Bargsley (@gbargsley), http://blog.garrybargsley.com",
        "Synopsis":  "Gets SQL Database Assembly information for each instance(s) of SQL Server.",
        "Name":  "Get-DbaDbAssembly",
        "Links":  "https://dbatools.io/Get-DbaDbAssembly",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDbAssembly -SqlInstance localhost\nReturns all Database Assembly on the local default SQL Server instance\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDbAssembly -SqlInstance localhost, sql2016\nReturns all Database Assembly for the local and sql2016 SQL Server instances",
        "Syntax":  "Get-DbaDbAssembly [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbccHelp",
        "Description":  "Returns the results of DBCC HELP\n\nRead more:\n    - https://docs.microsoft.com/en-us/sql/t-sql/database-console-commands/dbcc-help-transact-sql",
        "Tags":  "DBCC",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Statement",
                           "Is the name of the DBCC command for which to receive syntax information.\r\nProvide only the part of the DBCC command that follows DBCC,\r\n    for example, CHECKDB instead of DBCC CHECKDB.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "IncludeUndocumented",
                           "Allows getting help for undocumented DBCC commands. Requires Traceflag 2588\r\nThis only works for SQL Server 2005 or Higher",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Patrick Flynn (@sqllensman)",
        "Synopsis":  "Execution of Database Console Command DBCC HELP",
        "Name":  "Get-DbaDbccHelp",
        "Links":  "https://dbatools.io/Get-DbaDbccUserOptions",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDbccHelp -SqlInstance SQLInstance -Statement FREESYSTEMCACHE -Verbose | Format-List\nRuns the command DBCC HELP(FREESYSTEMCACHE) WITH NO_INFOMSGS against the SQL Server instance SQLInstance\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDbccHelp -SqlInstance LensmanSB -Statement WritePage -IncludeUndocumented | Format-List\nSets TraeFlag 2588 on for session and then runs the command DBCC HELP(WritePage) WITH NO_INFOMSGS against the SQL Server instance SQLInstance",
        "Syntax":  "Get-DbaDbccHelp [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Statement] \u003cString\u003e] [-IncludeUndocumented] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbccMemoryStatus",
        "Description":  "This command is used to run the DBCC MEMORYSTATUS comand and collect results in a single usable recordset\n\nReference:\n    - https://blogs.msdn.microsoft.com/timchapman/2012/08/16/how-to-parse-dbcc-memorystatus-via-powershell/\n    - https://support.microsoft.com/en-us/help/907877/how-to-use-the-dbcc-memorystatus-command-to-monitor-memory-usage-on-sq",
        "Tags":  [
                     "DBCC",
                     "Memory"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Patrick Flynn (@sqllensman)",
        "Synopsis":  "Gets the results of DBCC MEMORYSTATUS.  Works on SQL Server 2000-2019.",
        "Name":  "Get-DbaDbccMemoryStatus",
        "Links":  "https://dbatools.io/Get-DbaMemoryStatus",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDbccMemoryStatus -SqlInstance sqlcluster, sqlserver2012\nGet output of DBCC MEMORYSTATUS for instances \"sqlcluster\" and \"sqlserver2012\". Returns results in a single recordset.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaCmsRegServer -SqlInstance sqlcluster | Get-DbaDbccMemoryStatus\nGet output of DBCC MEMORYSTATUS for all servers in Server Central Management Server",
        "Syntax":  "Get-DbaDbccMemoryStatus [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbccProcCache",
        "Description":  "Returns the results of DBCC PROCCACHE\n\nRead more:\n    - https://docs.microsoft.com/en-us/sql/t-sql/database-console-commands/dbcc-proccache-transact-sql",
        "Tags":  "DBCC",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Patrick Flynn (@sqllensman)",
        "Synopsis":  "Execution of Database Console Command DBCC PROCCACHE",
        "Name":  "Get-DbaDbccProcCache",
        "Links":  "https://dbatools.io/Get-DbaDbccProcCache",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDbccProcCache -SqlInstance Server1\nGet results of DBCC PROCCACHE for Instance Server1\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e\u0027Sql1\u0027,\u0027Sql2/sqlexpress\u0027 | Get-DbaDbccProcCache\nGet results of DBCC PROCCACHE for Instances Sql1 and Sql2/sqlexpress\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003e$cred = Get-Credential sqladmin\nPS C:\\\u003e Get-DbaDbccProcCache -SqlInstance Server1 -SqlCredential $cred\nConnects using sqladmin credential and gets results of DBCC PROCCACHE for Instance Server1 using",
        "Syntax":  "Get-DbaDbccProcCache [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbccUserOption",
        "Description":  "Returns the results of DBCC USEROPTIONS\n\nRead more:\n    - https://docs.microsoft.com/en-us/sql/t-sql/database-console-commands/dbcc-useroptions-transact-sql",
        "Tags":  "DBCC",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Option",
                           "Return only specific options. Returns all results if not specified.\r\nAccepts any values in set \u0027ansi_null_dflt_on\u0027, \u0027ansi_nulls\u0027, \u0027ansi_padding\u0027, \u0027ansi_warnings\u0027, \u0027arithabort\u0027, \u0027concat_null_yields_null\u0027, \u0027datefirst\u0027, \u0027dateformat\u0027, \u0027isolation level\u0027, \u0027language\u0027, \r\n\u0027lock_timeout\u0027, \u0027quoted_identifier\u0027, \u0027textsize\u0027",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Patrick Flynn (@sqllensman)",
        "Synopsis":  "Execution of Database Console Command DBCC USEROPTIONS",
        "Name":  "Get-DbaDbccUserOption",
        "Links":  "https://dbatools.io/Get-DbaDbccUserOptions",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDbccUserOptions -SqlInstance Server1\nGet results of DBCC USEROPTIONS for Instance Server1\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e\u0027Sql1\u0027,\u0027Sql2/sqlexpress\u0027 | Get-DbaDbccUserOptions\nGet results of DBCC USEROPTIONS for Instances Sql1 and Sql2/sqlexpress\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003e$cred = Get-Credential sqladmin\nPS C:\\\u003e Get-DbaDbccUserOptions -SqlInstance Server1 -SqlCredential $cred\nConnects using sqladmin credential and gets results of DBCC USEROPTIONS for Instance Server1\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaDbccUserOptions -SqlInstance Server1 -Option ansi_nulls, ansi_warnings, datefirst\nGets results of DBCC USEROPTIONS for Instance Server1. Only display results for the options ansi_nulls, ansi_warnings, datefirst",
        "Syntax":  "Get-DbaDbccUserOption [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Option] \u003cString[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbCertificate",
        "Description":  "Gets database certificates",
        "Tags":  "Certificate",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance",
                           "ServerInstance,SqlServer",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to login to SQL Server using alternative credentials",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Get certificate from specific database",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "Database(s) to ignore when retrieving certificates",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Certificate",
                           "Get specific certificate by name",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Subject",
                           "sometimes it\u0027s text, other times cert",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Enables piping from Get-DbaDatabase",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Get-DbaDatabaseCertificate",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Gets database certificates",
        "Name":  "Get-DbaDbCertificate",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDbCertificate -SqlInstance sql2016\nGets all certificates\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDbCertificate -SqlInstance Server1 -Database db1\nGets the certificate for the db1 database\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaDbCertificate -SqlInstance Server1 -Database db1 -Certificate cert1\nGets the cert1 certificate within the db1 database\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaDbCertificate -SqlInstance Server1 -Database db1 -Subject \u0027Availability Group Cert\u0027\nGets the cert1 certificate within the db1 database",
        "Syntax":  "Get-DbaDbCertificate [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cString[]\u003e] [[-ExcludeDatabase] \u003cString[]\u003e] [[-Certificate] \u003cObject[]\u003e] [[-Subject] \u003cString[]\u003e] [[-InputObject] \u003cDatabase[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbCheckConstraint",
        "Description":  "Gets database Checks constraints.",
        "Tags":  "Database",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to login to SQL Server using alternative credentials",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "To get Checks from specific database(s)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeSystemTable",
                           "This switch removes all system objects from the table collection",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Claudio Silva (@ClaudioESSilva), https://claudioessilva.eu",
        "Synopsis":  "Gets database Check constraints.",
        "Name":  "Get-DbaDbCheckConstraint",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDbCheckConstraint -SqlInstance sql2016\nGets all database check constraints.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDbCheckConstraint -SqlInstance Server1 -Database db1\nGets the check constraints for the db1 database.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaDbCheckConstraint -SqlInstance Server1 -ExcludeDatabase db1\nGets the check constraints for all databases except db1.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaDbCheckConstraint -SqlInstance Server1 -ExcludeSystemTable\nGets the check constraints for all databases that are not system objects.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003e\u0027Sql1\u0027,\u0027Sql2/sqlexpress\u0027 | Get-DbaDbCheckConstraint\nGets the check constraints for the databases on Sql1 and Sql2/sqlexpress.",
        "Syntax":  "Get-DbaDbCheckConstraint [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [-ExcludeSystemTable] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbCompatibility",
        "Description":  "Get the current database compatibility level for all databases on a server or list of databases passed in to the function.",
        "Tags":  [
                     "Compatibility",
                     "Database"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "SqlCredential object used to connect to the SQL Server as a different user.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database or databases to process. If unspecified, all databases will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "A collection of databases (such as returned by Get-DbaDatabase)",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Garry Bargsley, http://blog.garrybargsley.com/",
        "Synopsis":  "Displays the compatibility level for SQL Server databases.",
        "Name":  "Get-DbaDbCompatibility",
        "Links":  "https://dbatools.io/Get-DbaDbCompatibility",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDbCompatibility -SqlInstance localhost\\sql2017\nDisplays database compatibility level for all user databases on server localhost\\sql2017\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDbCompatibility -SqlInstance localhost\\sql2017 -Database Test\nDisplays database compatibility level for database Test on server localhost\\sql2017",
        "Syntax":  "Get-DbaDbCompatibility [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cString[]\u003e] [[-InputObject] \u003cDatabase[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbCompression",
        "Description":  "This function gets the current size and compression for all objects in the specified database(s), if no database is specified it will return all objects in all user databases.",
        "Tags":  [
                     "Compression",
                     "Table",
                     "Database"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process - this list is auto populated from the server. If unspecified, all databases will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Jess Pomfret (@jpomfret), jesspomfret.com",
        "Synopsis":  "Gets tables and indexes size and current compression settings.",
        "Name":  "Get-DbaDbCompression",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDbCompression -SqlInstance localhost\nReturns objects size and current compression level for all user databases.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDbCompression -SqlInstance localhost -Database TestDatabase\nReturns objects size and current compression level for objects within the TestDatabase database.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaDbCompression -SqlInstance localhost -ExcludeDatabase TestDatabases\nReturns objects size and current compression level for objects in all databases except the TestDatabase database.",
        "Syntax":  "Get-DbaDbCompression [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbEncryption",
        "Description":  "Shows if a database has Transparent Data Encryption (TDE), any certificates, asymmetric keys or symmetric keys with details for each.",
        "Tags":  [
                     "Encryption",
                     "Database"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "IncludeSystemDBs",
                           "Switch parameter that when used will display system database information.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Get-DbaDatabaseEncryption",
        "Author":  "Stephen Bennett, https://sqlnotesfromtheunderground.wordpress.com/",
        "Synopsis":  "Returns a summary of encryption used on databases passed to it.",
        "Name":  "Get-DbaDbEncryption",
        "Links":  "https://dbatools.io/Get-DbaDbEncryption",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDbEncryption -SqlInstance DEV01\nList all encryption found on the instance by database\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDbEncryption -SqlInstance DEV01 -Database MyDB\nList all encryption found for the MyDB database.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaDbEncryption -SqlInstance DEV01 -ExcludeDatabase MyDB\nList all encryption found for all databases except MyDB.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaDbEncryption -SqlInstance DEV01 -IncludeSystemDBs\nList all encryption found for all databases including the system databases.",
        "Syntax":  "Get-DbaDbEncryption [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [-IncludeSystemDBs] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbExtentDiff",
        "Description":  "This is only an implementation of the script created by Paul S. Randal to find what percentage of a database has changed since the last full backup.\nhttps://www.sqlskills.com/blogs/paul/new-script-how-much-of-the-database-has-changed-since-the-last-full-backup/",
        "Tags":  [
                     "Backup",
                     "Database"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Viorel Ciucu, cviorel.com",
        "Synopsis":  "What percentage of a database has changed since the last full backup",
        "Name":  "Get-DbaDbExtentDiff",
        "Links":  "http://dbatools.io/Get-DbaDbExtentDiff",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDbExtentDiff -SqlInstance SQL2016 -Database DBA\nGet the changes for the DBA database.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e$Cred = Get-Credential sqladmin\nPS C:\\\u003e Get-DbaDbExtentDiff -SqlInstance SQL2017N1, SQL2017N2, SQL2016 -Database DB01 -SqlCredential $Cred\nGet the changes for the DB01 database on multiple servers.",
        "Syntax":  "Get-DbaDbExtentDiff [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbFeatureUsage",
        "Description":  "Shows features that are enabled in the database but not supported on all editions of SQL Server.\n\nBasically checks for Enterprise feature usage.\n\nThis feature must be removed before the database can be migrated to all available editions of SQL Server.",
        "Tags":  "Deprecated",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance",
                           "ServerInstance,SqlServer,SqlServers",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternate Windows or SQL Login Authentication. Accepts credential objects (Get-Credential).",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "A collection of databases (such as returned by Get-DbaDatabase), to be tested.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Brandon Abshire, netnerds.net",
        "Synopsis":  "Shows features that are enabled in the database but not supported on all editions of SQL Server. Basically checks for Enterprise feature usage.",
        "Name":  "Get-DbaDbFeatureUsage",
        "Links":  "https://dbatools.io/Get-DbaDbFeatureUsage",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDatabase -SqlInstance sql2008 -Database testdb, db2 | Get-DbaDbFeatureUsage\nShows features that are enabled in the testdb and db2 databases but\r\nnot supported on the all the editions of SQL Server.",
        "Syntax":  "Get-DbaDbFeatureUsage [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cString[]\u003e] [[-ExcludeDatabase] \u003cString[]\u003e] [[-InputObject] \u003cDatabase[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbFile",
        "Description":  "Returns detailed information about database files. Does not use SMO - SMO causes enumeration and this command avoids that.",
        "Tags":  "Database",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Credentials to connect to the SQL Server instance if the calling user doesn\u0027t have permission",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "A piped collection of database objects",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Get-DbaDatabaseFile",
        "Author":  "Stuart Moore (@napalmgram), stuart-moore.com",
        "Synopsis":  "Returns detailed information about database files.",
        "Name":  "Get-DbaDbFile",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDbFile -SqlInstance sql2016\nWill return an object containing all file groups and their contained files for every database on the sql2016 SQL Server instance\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDbFile -SqlInstance sql2016 -Database Impromptu\nWill return an object containing all file groups and their contained files for the Impromptu Database on the sql2016 SQL Server instance\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaDbFile -SqlInstance sql2016 -Database Impromptu, Trading\nWill return an object containing all file groups and their contained files for the Impromptu and Trading databases on the sql2016 SQL Server instance",
        "Syntax":  "Get-DbaDbFile [-SqlCredential \u003cPSCredential\u003e] [-Database \u003cObject[]\u003e] [-ExcludeDatabase \u003cObject[]\u003e] [-InputObject \u003cObject[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]\nGet-DbaDbFile -SqlInstance \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Database \u003cObject[]\u003e] [-ExcludeDatabase \u003cObject[]\u003e] [-InputObject \u003cObject[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbForeignKey",
        "Description":  "Gets database Foreign Keys.",
        "Tags":  [
                     "Database",
                     "ForeignKey",
                     "Table"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to login to SQL Server using alternative credentials",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "To get Foreign Keys from specific database(s)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeSystemTable",
                           "This switch removes all system objects from the tables collection",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Claudio Silva (@ClaudioESSilva), https://claudioessilva.eu",
        "Synopsis":  "Gets database Foreign Keys.",
        "Name":  "Get-DbaDbForeignKey",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDbForeignKey -SqlInstance sql2016\nGets all database Foreign Keys.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDbForeignKey -SqlInstance Server1 -Database db1\nGets the Foreign Keys for the db1 database.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaDbForeignKey -SqlInstance Server1 -ExcludeDatabase db1\nGets the Foreign Keys for all databases except db1.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaDbForeignKey -SqlInstance Server1 -ExcludeSystemTable\nGets the Foreign Keys from all tables that are not system objects from all databases.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003e\u0027Sql1\u0027,\u0027Sql2/sqlexpress\u0027 | Get-DbaDbForeignKey\nGets the Foreign Keys for the databases on Sql1 and Sql2/sqlexpress.",
        "Syntax":  "Get-DbaDbForeignKey [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [-ExcludeSystemTable] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbLogShipError",
        "Description":  "When your log shipping fails it\u0027s sometimes hard to see why is fails.\nUsing this function you\u0027ll be able to find out what went wrong in a short amount of time.",
        "Tags":  "LogShipping",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2000 or greater.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Allows you to filter the results to only return the databases you\u0027re interested in. This can be one or more values separated by commas.\r\nThis is not a wildcard and should be the exact database name. See examples for more info.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "Allows you to filter the results to only return the databases you\u0027re not interested in. This can be one or more values separated by commas.\r\nThis is not a wildcard and should be the exact database name.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Action",
                           "Filter to get the log shipping action that has occurred like Backup, Copy, Restore.\r\nBy default all the actions are returned.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "DateTimeFrom",
                           "Filter the results based on the date starting from datetime X",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "DateTimeTo",
                           "Filter the results based on the date ending with datetime X",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Primary",
                           "Allows to filter the results to only return values that apply to the primary instance.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Secondary",
                           "Allows to filter the results to only return values that apply to the secondary instance.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Get-DbaLogShippingError",
        "Author":  "Sander Stad (@sqlstad), sqlstad.nl",
        "Synopsis":  "Get-DbaDbLogShipError returns all the log shipping errors that occurred",
        "Name":  "Get-DbaDbLogShipError",
        "Links":  "https://dbatools.io/Get-DbaDbLogShipError",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDbLogShipError -SqlInstance sql1\nGet all the log shipping errors that occurred\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDbLogShipError -SqlInstance sql1 -Action Backup\nGet the errors that have something to do with the backup of the databases\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaDbLogShipError -SqlInstance sql1 -Secondary\nGet the errors that occurred on the secondary instance.\r\nThis will return the copy of the restore actions because those only occur on the secondary instance\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaDbLogShipError -SqlInstance sql1 -DateTimeFrom \"01/05/2018\"\nGet the errors that have occurred from \"01/05/2018\". This can also be of format \"yyyy-MM-dd\"\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eGet-DbaDbLogShipError -SqlInstance sql1 -Secondary -DateTimeFrom \"01/05/2018\" -DateTimeTo \"2018-01-07\"\nGet the errors that have occurred between \"01/05/2018\" and \"01/07/2018\".\r\nSee that is doesn\u0027t matter how the date is represented.",
        "Syntax":  "Get-DbaDbLogShipError [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cString[]\u003e] [[-ExcludeDatabase] \u003cString[]\u003e] [[-Action] \u003cString[]\u003e] [[-DateTimeFrom] \u003cDateTime\u003e] [[-DateTimeTo] \u003cDateTime\u003e] [-Primary] [-Secondary] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbMail",
        "Description":  "Gets the database mail from SQL Server",
        "Tags":  [
                     "DatabaseMail",
                     "DBMail",
                     "Mail"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "TThe target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Gets the database mail from SQL Server",
        "Name":  "Get-DbaDbMail",
        "Links":  "https://dbatools.io/Get-DbaDbMail",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDbMail -SqlInstance sql01\\sharepoint\nReturns the db mail server object on sql01\\sharepoint\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDbMail -SqlInstance sql01\\sharepoint | Select *\nReturns the db mail server object on sql01\\sharepoint then return a bunch more columns\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003e$servers = \"sql2014\",\"sql2016\", \"sqlcluster\\sharepoint\"\nPS C:\\\u003e $servers | Get-DbaDbMail\nReturns the db mail server object for \"sql2014\",\"sql2016\" and \"sqlcluster\\sharepoint\"",
        "Syntax":  "Get-DbaDbMail [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbMailAccount",
        "Description":  "Gets database mail accounts from SQL Server",
        "Tags":  [
                     "DatabaseMail",
                     "DbMail",
                     "Mail"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Account",
                           "Specifies one or more account(s) to get. If unspecified, all accounts will be returned.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeAccount",
                           "Specifies one or more account(s) to exclude.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Accepts pipeline input from Get-DbaDbMail",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Gets database mail accounts from SQL Server",
        "Name":  "Get-DbaDbMailAccount",
        "Links":  "https://dbatools.io/Get-DbaDbMailAccount",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDbMailAccount -SqlInstance sql01\\sharepoint\nReturns Database Mail accounts on sql01\\sharepoint\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDbMailAccount -SqlInstance sql01\\sharepoint -Account \u0027The DBA Team\u0027\nReturns The DBA Team Database Mail account from sql01\\sharepoint\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaDbMailAccount -SqlInstance sql01\\sharepoint | Select *\nReturns the Database Mail accounts on sql01\\sharepoint then return a bunch more columns\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003e$servers = \"sql2014\",\"sql2016\", \"sqlcluster\\sharepoint\"\nPS C:\\\u003e $servers | Get-DbaDbMail | Get-DbaDbMailAccount\nReturns the Database Mail accounts for \"sql2014\",\"sql2016\" and \"sqlcluster\\sharepoint\"",
        "Syntax":  "Get-DbaDbMailAccount [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Account] \u003cString[]\u003e] [[-ExcludeAccount] \u003cString[]\u003e] [[-InputObject] \u003cSqlMail[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbMailConfig",
        "Description":  "Gets database mail configs from SQL Server",
        "Tags":  [
                     "DatabaseMail",
                     "DBMail",
                     "Mail"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "TThe target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Name",
                           "Specifies one or more config(s) to get. If unspecified, all configs will be returned.",
                           "Config,ConfigName",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Accepts pipeline input from Get-DbaDbMail",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Gets database mail configs from SQL Server",
        "Name":  "Get-DbaDbMailConfig",
        "Links":  "https://dbatools.io/Get-DbaDbMailConfig",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDbMailConfig -SqlInstance sql01\\sharepoint\nReturns DBMail configs on sql01\\sharepoint\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDbMailConfig -SqlInstance sql01\\sharepoint -Name ProhibitedExtensions\nReturns the ProhibitedExtensions configuration on sql01\\sharepoint\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaDbMailConfig -SqlInstance sql01\\sharepoint | Select *\nReturns the DBMail configs on sql01\\sharepoint then return a bunch more columns\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003e$servers = \"sql2014\",\"sql2016\", \"sqlcluster\\sharepoint\"\nPS C:\\\u003e $servers | Get-DbaDbMail | Get-DbaDbMailConfig\nReturns the DBMail configs for \"sql2014\",\"sql2016\" and \"sqlcluster\\sharepoint\"",
        "Syntax":  "Get-DbaDbMailConfig [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Name] \u003cString[]\u003e] [[-InputObject] \u003cSqlMail[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbMailHistory",
        "Description":  "Gets the history of mail sent from a SQL instance",
        "Tags":  [
                     "DatabaseMail",
                     "DBMail",
                     "Mail"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "TThe target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to login to servers using SQL Logins as opposed to Windows Auth/Integrated/Trusted.",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Since",
                           "Datetime object used to narrow the results to the send request date",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Status",
                           "Narrow the results by status. Valid values include Unsent, Sent, Failed and Retrying",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Gets the history of mail sent from a SQL instance",
        "Name":  "Get-DbaDbMailHistory",
        "Links":  "https://dbatools.io/Get-DbaDbMailHistory",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDbMailHistory -SqlInstance sql01\\sharepoint\nReturns the entire DBMail history on sql01\\sharepoint\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDbMailHistory -SqlInstance sql01\\sharepoint | Select *\nReturns the entire DBMail history on sql01\\sharepoint then return a bunch more columns\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003e$servers = \"sql2014\",\"sql2016\", \"sqlcluster\\sharepoint\"\nPS C:\\\u003e $servers | Get-DbaDbMailHistory\nReturns the all DBMail history for \"sql2014\",\"sql2016\" and \"sqlcluster\\sharepoint\"",
        "Syntax":  "Get-DbaDbMailHistory [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Since] \u003cDateTime\u003e] [[-Status] \u003cString\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbMailLog",
        "Description":  "Gets the DBMail log from a SQL instance",
        "Tags":  [
                     "DatabaseMail",
                     "DBMail",
                     "Mail"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "TThe target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to login to servers using SQL Logins as opposed to Windows Auth/Integrated/Trusted.",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Since",
                           "Datetime object used to narrow the results to the send request date",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Type",
                           "Narrow the results by type. Valid values include Error, Warning, Success, Information, Internal",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Gets the DBMail log from a SQL instance",
        "Name":  "Get-DbaDbMailLog",
        "Links":  "https://dbatools.io/Get-DbaDbMailLog",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDbMailLog -SqlInstance sql01\\sharepoint\nReturns the entire DBMail log on sql01\\sharepoint\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDbMailLog -SqlInstance sql01\\sharepoint | Select *\nReturns the entire DBMail log on sql01\\sharepoint, includes all returned information.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003e$servers = \"sql2014\",\"sql2016\", \"sqlcluster\\sharepoint\"\nPS C:\\\u003e $servers | Get-DbaDbMailLog -Type Error, Information\nReturns only the Error and Information DBMail log for \"sql2014\",\"sql2016\" and \"sqlcluster\\sharepoint\"",
        "Syntax":  "Get-DbaDbMailLog [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Since] \u003cDateTime\u003e] [[-Type] \u003cString[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbMailProfile",
        "Description":  "Gets database mail profiles from SQL Server",
        "Tags":  [
                     "DatabaseMail",
                     "DBMail",
                     "Mail"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "TThe target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Profile",
                           "Specifies one or more profile(s) to get. If unspecified, all profiles will be returned.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeProfile",
                           "Specifies one or more profile(s) to exclude.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Accepts pipeline input from Get-DbaDbMail",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Gets database mail profiles from SQL Server",
        "Name":  "Get-DbaDbMailProfile",
        "Links":  "https://dbatools.io/Get-DbaDbMailProfile",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDbMailProfile -SqlInstance sql01\\sharepoint\nReturns DBMail profiles on sql01\\sharepoint\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDbMailProfile -SqlInstance sql01\\sharepoint -Profile \u0027The DBA Team\u0027\nReturns The DBA Team DBMail profile from sql01\\sharepoint\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaDbMailProfile -SqlInstance sql01\\sharepoint | Select *\nReturns the DBMail profiles on sql01\\sharepoint then return a bunch more columns\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003e$servers = \"sql2014\",\"sql2016\", \"sqlcluster\\sharepoint\"\nPS C:\\\u003e $servers | Get-DbaDbMail | Get-DbaDbMailProfile\nReturns the DBMail profiles for \"sql2014\",\"sql2016\" and \"sqlcluster\\sharepoint\"",
        "Syntax":  "Get-DbaDbMailProfile [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Profile] \u003cString[]\u003e] [[-ExcludeProfile] \u003cString[]\u003e] [[-InputObject] \u003cSqlMail[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbMailServer",
        "Description":  "Gets database mail servers from SQL Server",
        "Tags":  [
                     "DatabaseMail",
                     "DBMail",
                     "Mail"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "TThe target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Server",
                           "Specifies one or more server(s) to get. If unspecified, all servers will be returned.",
                           "Name",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Account",
                           "Get only the mail server associated with specific accounts",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Accepts pipeline input from Get-DbaDbMail",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Gets database mail servers from SQL Server",
        "Name":  "Get-DbaDbMailServer",
        "Links":  "https://dbatools.io/Get-DbaDbMailServer",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDbMailServer -SqlInstance sql01\\sharepoint\nReturns all DBMail servers on sql01\\sharepoint\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDbMailServer -SqlInstance sql01\\sharepoint -Server DbaTeam\nReturns The DBA Team DBMail server from sql01\\sharepoint\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaDbMailServer -SqlInstance sql01\\sharepoint | Select *\nReturns the DBMail servers on sql01\\sharepoint then return a bunch more columns\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003e$servers = \"sql2014\",\"sql2016\", \"sqlcluster\\sharepoint\"\nPS C:\\\u003e $servers | Get-DbaDbMail | Get-DbaDbMailServer\nReturns the DBMail servers for \"sql2014\",\"sql2016\" and \"sqlcluster\\sharepoint\"",
        "Syntax":  "Get-DbaDbMailServer [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Server] \u003cString[]\u003e] [[-Account] \u003cString[]\u003e] [[-InputObject] \u003cSqlMail[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbMasterKey",
        "Description":  "Gets specified database master key",
        "Tags":  [
                     "Certificate",
                     "Database"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance",
                           "ServerInstance,SqlServer",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to login to SQL Server using alternative credentials",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Get master key from specific database",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Database object piped in from Get-DbaDatabase",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Get-DbaDatabaseMasterKey",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Gets specified database master key",
        "Name":  "Get-DbaDbMasterKey",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDbMasterKey -SqlInstance sql2016\nGets all master database keys\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDbMasterKey -SqlInstance Server1 -Database db1\nGets the master key for the db1 database",
        "Syntax":  "Get-DbaDbMasterKey [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cString[]\u003e] [[-ExcludeDatabase] \u003cString[]\u003e] [[-InputObject] \u003cDatabase[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbMemoryUsage",
        "Description":  "This command can be utilized to determine which databases on a given instance are consuming buffer pool memory.\n\nThis command is based on query provided by Aaron Bertrand.\nReference: https://www.mssqltips.com/sqlservertip/2393/determine-sql-server-memory-use-by-database-and-object/",
        "Tags":  [
                     "Memory",
                     "Database"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer,SqlServers",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential).",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.",
                           "",
                           false,
                           "true (ByPropertyName)",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "IncludeSystemDb",
                           "Switch to have the output include system database memory consumption.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Shawn Melton (@wsmelton), https://wsmelton.github.io",
        "Synopsis":  "Determine buffer pool usage by database.",
        "Name":  "Get-DbaDbMemoryUsage",
        "Links":  "https://dbatools.io/Get-DbaDbMemoryUsage",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDbMemoryUsage -SqlInstance sqlserver2014a\nReturns the buffer pool consumption for all user databases\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDbMemoryUsage -SqlInstance sqlserver2014a -IncludeSystemDb\nReturns the buffer pool consumption for all user databases and system databases\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaDbMemoryUsage -SqlInstance sql1 -IncludeSystemDb -Database tempdb\nReturns the buffer pool consumption for tempdb database only\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaDbMemoryUsage -SqlInstance sql2 -IncludeSystemDb -Exclude \u0027master\u0027,\u0027model\u0027,\u0027msdb\u0027,\u0027ResourceDb\u0027\nReturns the buffer pool consumption for all user databases and tempdb database",
        "Syntax":  "Get-DbaDbMemoryUsage [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Database \u003cObject[]\u003e] [-ExcludeDatabase \u003cObject[]\u003e] [-IncludeSystemDb] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbMirror",
        "Description":  "Gets properties of database mirrors and mirror witnesses.",
        "Tags":  [
                     "Mirror",
                     "HA"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function\r\nto be executed against multiple SQL Server instances.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Gets properties of database mirrors and mirror witnesses.",
        "Name":  "Get-DbaDbMirror",
        "Links":  "https://dbatools.io/Get-DbaDbMirror",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDbMirror -SqlInstance localhost\nGets properties of database mirrors and mirror witnesses on localhost\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDbMirror -SqlInstance localhost, sql2016\nGets properties of database mirrors and mirror witnesses on localhost and sql2016 SQL Server instances",
        "Syntax":  "Get-DbaDbMirror [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbMirrorMonitor",
        "Description":  "Returns status rows for a monitored database from the status table in which database mirroring monitoring history is stored and allows you to choose whether the procedure obtains the latest status beforehand.\n\nBasically executes sp_dbmmonitorresults.",
        "Tags":  [
                     "Mirror",
                     "HA"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternate Windows or SQL Login Authentication. Accepts credential objects (Get-Credential).",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The target database.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Allows piping from Get-DbaDatabase.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Update",
                           "Updates the status for the database by calling sp_dbmmonitorupdate before computing the results.\r\nHowever, if the status table has been updated within the previous 15 seconds, or the user is not a member of the sysadmin fixed server role, the command runs without updating the status.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "LimitResults",
                           "Limit results. Defaults to last two hours.\nOptions include:\r\nLastRow\r\nLastTwoHours\r\nLastFourHours\r\nLastEightHours\r\nLastDay\r\nLastTwoDays\r\nLast100Rows\r\nLast500Rows\r\nLast1000Rows\r\nLast1000000Rows",
                           "",
                           false,
                           "false",
                           "LastTwoHours"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Returns status rows for a monitored database from the status table in which database mirroring monitoring history is stored and allows you to choose whether the procedure obtains the latest status beforehand.",
        "Name":  "Get-DbaDbMirrorMonitor",
        "Links":  "https://dbatools.io/Get-DbaDbMirrorMonitor",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDbMirrorMonitor -SqlInstance sql2008, sql2012\nReturns last two hours\u0027 worth of status rows for a monitored database from the status table on sql2008 and sql2012.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDbMirrorMonitor -SqlInstance sql2005 -LimitResults LastDay -Update\nUpdates monitor stats then returns the last 24 hours worth of status rows for a monitored database from the status table on sql2008 and sql2012.",
        "Syntax":  "Get-DbaDbMirrorMonitor [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cString[]\u003e] [[-InputObject] \u003cDatabase[]\u003e] [-Update] [[-LimitResults] \u003cString\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbPageInfo",
        "Description":  "Get-DbaDbPageInfo is able to return information about the pages in a database.\nIt\u0027s possible to return the information for multiple databases and filter on specific databases, schemas and tables.",
        "Tags":  [
                     "Database",
                     "Page"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances",
                           "ServerInstance,SqlServer",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Filter to only get specific databases",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Schema",
                           "Filter to only get specific schemas",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Table",
                           "Filter to only get specific tables",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Enables piping from Get-DbaDatabase",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Get-DbaDbPageInfo will return page information for a database",
        "Name":  "Get-DbaDbPageInfo",
        "Links":  "https://dbatools.io/Get-DbaDbPageInfo",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eet-DbaDbPageInfo -SqlInstance sql2017\nReturns page information for all databases on sql2017\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDbPageInfo -SqlInstance sql2017, sql2016 -Database testdb\nReturns page information for the testdb on sql2017 and sql2016\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003e$servers | Get-DbaDatabase -Database testdb | Get-DbaDbPageInfo\nReturns page information for the testdb on all $servers",
        "Syntax":  "Get-DbaDbPageInfo [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cString[]\u003e] [[-Schema] \u003cString[]\u003e] [[-Table] \u003cString[]\u003e] [[-InputObject] \u003cDatabase[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbPartitionFunction",
        "Description":  "Gets database Partition Functions",
        "Tags":  "Database",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to login to SQL Server using alternative credentials",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "To get users from specific database(s)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Get-DbaDatabasePartitionFunction",
        "Author":  "Klaas Vandenberghe ( @PowerDbaKlaas )",
        "Synopsis":  "Gets database Partition Functions",
        "Name":  "Get-DbaDbPartitionFunction",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDbPartitionFunction -SqlInstance sql2016\nGets all database Partition Functions\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDbPartitionFunction -SqlInstance Server1 -Database db1\nGets the Partition Functions for the db1 database\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaDbPartitionFunction -SqlInstance Server1 -ExcludeDatabase db1\nGets the Partition Functions for all databases except db1\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003e\u0027Sql1\u0027,\u0027Sql2/sqlexpress\u0027 | Get-DbaDbPartitionFunction\nGets the Partition Functions for the databases on Sql1 and Sql2/sqlexpress",
        "Syntax":  "Get-DbaDbPartitionFunction [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbPartitionScheme",
        "Description":  "Gets database Partition Schemes",
        "Tags":  "Database",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to login to SQL Server using alternative credentials",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "To get users from specific database(s)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Get-DbaDatabasePartitionScheme",
        "Author":  "Klaas Vandenberghe (@PowerDbaKlaas)",
        "Synopsis":  "Gets database Partition Schemes",
        "Name":  "Get-DbaDbPartitionScheme",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDbPartitionScheme -SqlInstance sql2016\nGets all database Partition Schemes\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDbPartitionScheme -SqlInstance Server1 -Database db1\nGets the Partition Schemes for the db1 database\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaDbPartitionScheme -SqlInstance Server1 -ExcludeDatabase db1\nGets the Partition Schemes for all databases except db1\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003e\u0027Sql1\u0027,\u0027Sql2/sqlexpress\u0027 | Get-DbaDbPartitionScheme\nGets the Partition Schemes for the databases on Sql1 and Sql2/sqlexpress",
        "Syntax":  "Get-DbaDbPartitionScheme [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbQueryStoreOption",
        "Description":  "Retrieves and returns the Query Store configuration for every database that has the Query Store feature enabled.",
        "Tags":  "QueryStore",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "SqlCredential object used to connect to the SQL Server as a different user.",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Get-DbaDbQueryStoreOptions,Get-DbaQueryStoreConfig",
        "Author":  "Enrico van de Laar (@evdlaar) | Klaas Vandenberghe (@PowerDBAKlaas)",
        "Synopsis":  "Get the Query Store configuration for Query Store enabled databases.",
        "Name":  "Get-DbaDbQueryStoreOption",
        "Links":  "https://dbatools.io/Get-DbaQueryStoreOptions",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDbQueryStoreOption -SqlInstance ServerA\\sql\nReturns Query Store configuration settings for every database on the ServerA\\sql instance.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDbQueryStoreOption -SqlInstance ServerA\\sql | Where-Object {$_.ActualState -eq \"ReadWrite\"}\nReturns the Query Store configuration for all databases on ServerA\\sql where the Query Store feature is in Read/Write mode.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaDbQueryStoreOption -SqlInstance localhost | format-table -AutoSize -Wrap\nReturns Query Store configuration settings for every database on the ServerA\\sql instance inside a table format.",
        "Syntax":  "Get-DbaDbQueryStoreOption [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbRecoveryModel",
        "Description":  "Get-DbaDbRecoveryModel displays the Recovery Model for all databases. This is the default, you can filter using -Database, -ExcludeDatabase, -RecoveryModel",
        "Tags":  [
                     "Recovery",
                     "RecoveryModel",
                     "Simple",
                     "Full",
                     "Bulk",
                     "BulkLogged"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "RecoveryModel",
                           "Filters the output based on Recovery Model. Valid options are Simple, Full and BulkLogged\nDetails about the recovery models can be found here:\r\nhttps://docs.microsoft.com/en-us/sql/relational-databases/backup-restore/recovery-models-sql-server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process - this list is auto-populated from the server. if unspecified, all databases will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Viorel Ciucu (@viorelciucu), https://www.cviorel.com",
        "Synopsis":  "Get-DbaDbRecoveryModel displays the Recovery Model.",
        "Name":  "Get-DbaDbRecoveryModel",
        "Links":  "https://dbatools.io/Get-DbaDbRecoveryModel",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDbRecoveryModel -SqlInstance sql2014 -RecoveryModel BulkLogged -Verbose\nGets all databases on SQL Server instance sql2014 having RecoveryModel set to BulkLogged.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDbRecoveryModel -SqlInstance sql2014 -Database TestDB\nGets recovery model information for TestDB. If TestDB does not exist on the instance nothing is returned.",
        "Syntax":  "Get-DbaDbRecoveryModel [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-RecoveryModel] \u003cString[]\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbRestoreHistory",
        "Description":  "By default, this command will return the server name, database, username, restore type, date, from file and to files.\n\nThanks to https://www.mssqltips.com/SqlInstancetip/1724/when-was-the-last-time-your-sql-server-database-was-restored/ for the query and https://sqlstudies.com/2016/07/27/when-was-this-database-restored/ for the idea.",
        "Tags":  [
                     "DisasterRecovery",
                     "Backup",
                     "Restore"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "Specifies the SQL Server instance(s) to operate on. Requires SQL Server 2005 or higher.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Specifies the database(s) to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "Specifies the database(s) to exclude from processing. Options for this list are auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Since",
                           "Specifies a datetime to use as the starting point for searching backup history.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Force",
                           "Deprecated.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Last",
                           "If this switch is enabled, the last restore action performed on each database is returned.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Get-DbaRestoreHistory",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Returns restore history details for databases on a SQL Server.",
        "Name":  "Get-DbaDbRestoreHistory",
        "Links":  "https://dbatools.io/Get-DbaDbRestoreHistory",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDbRestoreHistory -SqlInstance sql2016\nReturns server name, database, username, restore type, date for all restored databases on sql2016.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDbRestoreHistory -SqlInstance sql2016 -Database db1, db2 -Since \u00272016-07-01 10:47:00\u0027\nReturns restore information only for databases db1 and db2 on sql2016 since July 1, 2016 at 10:47 AM.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaDbRestoreHistory -SqlInstance sql2014, sql2016 -Exclude db1\nReturns restore information for all databases except db1 on sql2014 and sql2016.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003e$cred = Get-Credential sqladmin\nPS C:\\\u003e Get-DbaDbRestoreHistory -SqlInstance sql2014 -Database AdventureWorks2014, pubs -SqlCredential $cred | Format-Table\nReturns database restore information for AdventureWorks2014 and pubs database on sql2014, connects using SQL Authentication via sqladmin account. Formats the data as a table.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eGet-DbaCmsRegServer -SqlInstance sql2016 | Get-DbaDbRestoreHistory\nReturns database restore information for every database on every server listed in the Central Management Server on sql2016.",
        "Syntax":  "Get-DbaDbRestoreHistory [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [[-Since] \u003cDateTime\u003e] [-Force] [-Last] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbRoleMember",
        "Description":  "The Get-DbaDbRoleMember returns connected SMO object for database roles for each instance(s) of SQL Server.",
        "Tags":  [
                     "Role",
                     "Database",
                     "Security",
                     "Login"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternate Windows or SQL Login Authentication. Accepts credential objects (Get-Credential).",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process. This list is auto-populated from the server. If unspecified, all databases will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude. This list is auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Role",
                           "The role(s) to process. If unspecified, all roles will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeRole",
                           "The role(s) to exclude.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeFixedRole",
                           "Excludes all members of fixed roles.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "IncludeSystemUser",
                           "Includes system users. By default system users are not included.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Get-DbaRoleMember",
        "Author":  "Klaas Vandenberghe (@PowerDBAKlaas)",
        "Synopsis":  "Get members of database roles for each instance(s) of SQL Server.",
        "Name":  "Get-DbaDbRoleMember",
        "Links":  "https://dbatools.io/Get-DbaDbRoleMember",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDbRoleMember -SqlInstance localhost\nReturns all members of all database roles on the local default SQL Server instance\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDbRoleMember -SqlInstance localhost, sql2016\nReturns all members of all database roles on the local and sql2016 SQL Server instances\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003e$servers = Get-Content C:\\servers.txt\nPS C:\\\u003e $servers | Get-DbaDbRoleMember\nReturns all members of all database roles for every server in C:\\servers.txt\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaDbRoleMember -SqlInstance localhost -Database msdb\nReturns non-system members of all roles in the msdb database on localhost.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eGet-DbaDbRoleMember -SqlInstance localhost -Database msdb -IncludeSystemUser -ExcludeFixedRole\nReturns all members of non-fixed roles in the msdb database on localhost.\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eGet-DbaDbRoleMember -SqlInstance localhost -Database msdb -Role \u0027db_owner\u0027\nReturns all members of the db_owner role in the msdb database on localhost.",
        "Syntax":  "Get-DbaDbRoleMember [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Database \u003cString[]\u003e] [-ExcludeDatabase \u003cString[]\u003e] [-Role \u003cString[]\u003e] [-ExcludeRole \u003cString[]\u003e] [-ExcludeFixedRole] [-IncludeSystemUser] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbSharePoint",
        "Description":  "Returns databases that are part of a SharePoint Farm, as found in the SharePoint Configuration database.\n\nBy default, this command checks SharePoint_Config. To use an alternate database, use the ConfigDatabase parameter.",
        "Tags":  "SharePoint",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternate Windows or SQL Login Authentication. Accepts credential objects (Get-Credential).",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ConfigDatabase",
                           "The name of the SharePoint Configuration database. Defaults to SharePoint_Config.",
                           "",
                           false,
                           "false",
                           "SharePoint_Config"
                       ],
                       [
                           "InputObject",
                           "Allows piping from Get-DbaDatabase.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Returns databases that are part of a SharePoint Farm.",
        "Name":  "Get-DbaDbSharePoint",
        "Links":  "https://dbatools.io/Get-DbaDbSharePoint",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDbSharePoint -SqlInstance sqlcluster\nReturns databases that are part of a SharePoint Farm, as found in SharePoint_Config on sqlcluster\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDatabase -SqlInstance sqlcluster -Database SharePoint_Config_2016 | Get-DbaDbSharePoint\nReturns databases that are part of a SharePoint Farm, as found in SharePoint_Config_2016 on sqlcluster",
        "Syntax":  "Get-DbaDbSharePoint [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-ConfigDatabase] \u003cString[]\u003e] [[-InputObject] \u003cDatabase[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbSnapshot",
        "Description":  "Retrieves the list of database snapshot available, along with their base (the db they are the snapshot of) and creation time",
        "Tags":  "Snapshot",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Credential object used to connect to the SQL Server as a different user",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Return information for only specific databases",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Snapshot",
                           "Return information for only specific snapshots",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeSnapshot",
                           "The snapshot(s) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Get-DbaDatabaseSnapshot",
        "Author":  "Simone Bizzotto (@niphlod)",
        "Synopsis":  "Get database snapshots with details",
        "Name":  "Get-DbaDbSnapshot",
        "Links":  "https://dbatools.io/Get-DbaDbSnapshot",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDbSnapshot -SqlInstance sqlserver2014a\nReturns a custom object displaying Server, Database, DatabaseCreated, SnapshotOf, SizeMB, DatabaseCreated\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDbSnapshot -SqlInstance sqlserver2014a -Database HR, Accounting\nReturns information for database snapshots having HR and Accounting as base dbs\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaDbSnapshot -SqlInstance sqlserver2014a -Snapshot HR_snapshot, Accounting_snapshot\nReturns information for database snapshots HR_snapshot and Accounting_snapshot",
        "Syntax":  "Get-DbaDbSnapshot [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [[-Snapshot] \u003cObject[]\u003e] [[-ExcludeSnapshot] \u003cObject[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbSpace",
        "Description":  "This function returns database file space information for a SQL Instance or group of SQL Instances. Information is based on a query against sys.database_files and the FILEPROPERTY function to query and return information.\n\nFile free space script borrowed and modified from Glenn Berry\u0027s DMV scripts (http://www.sqlskills.com/blogs/glenn/category/dmv-queries/)",
        "Tags":  [
                     "Database",
                     "Space",
                     "Storage"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Specifies the database(s) to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "Specifies the database(s) to exclude from processing. Options for this list are auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "IncludeSystemDBs",
                           "If this switch is enabled, system databases will be processed. By default, only user databases are processed.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Get-DbaDatabaseFreeSpace,Get-DbaDatabaseSpace",
        "Author":  "Michael Fal (@Mike_Fal), http://mikefal.net",
        "Synopsis":  "Returns database file space information for database files on a SQL instance.",
        "Name":  "Get-DbaDbSpace",
        "Links":  "https://dbatools.io/Get-DbaDbSpace",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDbSpace -SqlInstance localhost\nReturns all user database files and free space information for the localhost.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDbSpace -SqlInstance localhost | Where-Object {$_.PercentUsed -gt 80}\nReturns all user database files and free space information for the local host. Filters the output object by any files that have a percent used of greater than 80%.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003e\u0027localhost\u0027,\u0027localhost\\namedinstance\u0027 | Get-DbaDbSpace\nReturns all user database files and free space information for the localhost and localhost\\namedinstance SQL Server instances. Processes data via the pipeline.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaDbSpace -SqlInstance localhost -Database db1, db2 | Where-Object { $_.SpaceUntilMaxSize.Megabyte -lt 1 }\nReturns database files and free space information for the db1 and db2 on localhost where there is only 1MB left until the space is maxed out\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eGet-DbaDbSpace -SqlInstance localhost -Database db1, db2 | Where-Object { $_.SpaceUntilMaxSize.Gigabyte -lt 1 }\nReturns database files and free space information for the db1 and db2 on localhost where there is only 1GB left until the space is maxed out",
        "Syntax":  "Get-DbaDbSpace [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cString[]\u003e] [[-ExcludeDatabase] \u003cString[]\u003e] [-IncludeSystemDBs] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbState",
        "Description":  "Gets some common \"states\" on databases:\n- \"RW\" options : READ_ONLY or READ_WRITE\n- \"Status\" options : ONLINE, OFFLINE, EMERGENCY, RESTORING\n- \"Access\" options : SINGLE_USER, RESTRICTED_USER, MULTI_USER\n\nReturns an object with SqlInstance, Database, RW, Status, Access",
        "Tags":  "Database",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Credential object used to connect to the SQL Server as a different user",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Get-DbaDatabaseState",
        "Author":  "Simone Bizzotto (@niphold)",
        "Synopsis":  "Gets various options for databases, hereby called \"states\"",
        "Name":  "Get-DbaDbState",
        "Links":  "https://dbatools.io/Get-DbaDbState",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDbState -SqlInstance sqlserver2014a\nGets options for all databases of the sqlserver2014a instance\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDbState -SqlInstance sqlserver2014a -Database HR, Accounting\nGets options for both HR and Accounting database of the sqlserver2014a instance\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaDbState -SqlInstance sqlserver2014a -Exclude HR\nGets options for all databases of the sqlserver2014a instance except HR\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003e\u0027sqlserver2014a\u0027, \u0027sqlserver2014b\u0027 | Get-DbaDbState\nGets options for all databases of sqlserver2014a and sqlserver2014b instances",
        "Syntax":  "Get-DbaDbState [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbStoredProcedure",
        "Description":  "Gets database Stored Procedures",
        "Tags":  [
                     "Database",
                     "StoredProcedure",
                     "Proc"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to login to SQL Server using alternative credentials",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "To get Stored Procedures from specific database(s)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeSystemSp",
                           "This switch removes all system objects from the Stored Procedure collection",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Klaas Vandenberghe (@PowerDbaKlaas)",
        "Synopsis":  "Gets database Stored Procedures",
        "Name":  "Get-DbaDbStoredProcedure",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDbStoredProcedure -SqlInstance sql2016\nGets all database Stored Procedures\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDbStoredProcedure -SqlInstance Server1 -Database db1\nGets the Stored Procedures for the db1 database\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaDbStoredProcedure -SqlInstance Server1 -ExcludeDatabase db1\nGets the Stored Procedures for all databases except db1\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaDbStoredProcedure -SqlInstance Server1 -ExcludeSystemSp\nGets the Stored Procedures for all databases that are not system objects\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003e\u0027Sql1\u0027,\u0027Sql2/sqlexpress\u0027 | Get-DbaDbStoredProcedure\nGets the Stored Procedures for the databases on Sql1 and Sql2/sqlexpress",
        "Syntax":  "Get-DbaDbStoredProcedure [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [-ExcludeSystemSp] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbTable",
        "Description":  "Shows table information around table row and data sizes and if it has any table type information.",
        "Tags":  [
                     "Database",
                     "Tables"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "IncludeSystemDBs",
                           "Switch parameter that when used will display system database information",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Table",
                           "Define a specific table you would like to query. You can specify up to three-part name like db.sch.tbl.\nIf the object has special characters please wrap them in square brackets [ ].\r\nUsing dbo.First.Table will try to find table named \u0027Table\u0027 on schema \u0027First\u0027 and database \u0027dbo\u0027.\r\nThe correct way to find table named \u0027First.Table\u0027 on schema \u0027dbo\u0027 is by passing dbo.[First.Table]\r\nAny actual usage of the ] must be escaped by duplicating the ] character.\r\nThe correct way to find a table Name] in schema Schema.Name is by passing [Schema.Name].[Name]]]",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Get-DbaTable",
        "Author":  "Stephen Bennett, https://sqlnotesfromtheunderground.wordpress.com/",
        "Synopsis":  "Returns a summary of information on the tables",
        "Name":  "Get-DbaDbTable",
        "Links":  "https://dbatools.io/Get-DbaDbTable",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDbTable -SqlInstance DEV01 -Database Test1\nReturn all tables in the Test1 database\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDbTable -SqlInstance DEV01 -Database MyDB -Table MyTable\nReturn only information on the table MyTable from the database MyDB\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaDbTable -SqlInstance DEV01 -Table MyTable\nReturns information on table called MyTable if it exists in any database on the server, under any schema\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaDbTable -SqlInstance DEV01 -Table dbo.[First.Table]\nReturns information on table called First.Table on schema dbo if it exists in any database on the server\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003e\u0027localhost\u0027,\u0027localhost\\namedinstance\u0027 | Get-DbaDbTable -Database DBA -Table Commandlog\nReturns information on the CommandLog table in the DBA database on both instances localhost and the named instance localhost\\namedinstance\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eGet-DbaDbTable -SqlInstance DEV01 -Table \"[[DbName]]].[Schema.With.Dots].[`\"[Process]]`\"]\" -Verbose\nFor the instance Dev01 Returns information for a table named: \"[Process]\" in schema named: Schema.With.Dots in database named: [DbName]\r\nThe Table name, Schema name and Database name must be wrapped in square brackets [ ]\r\nSpecial charcters like \" must be escaped by a ` charcter.\r\nIn addition any actual instance of the ] character must be escaped by being duplicated.",
        "Syntax":  "Get-DbaDbTable [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [-IncludeSystemDBs] [[-Table] \u003cString[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbTrigger",
        "Description":  "Get all existing database triggers on one or more SQL instances.",
        "Tags":  [
                     "Database",
                     "Trigger"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "SqlCredential object used to connect to the SQL Server as a different user.",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Allow pipedline input from Get-DbaDatabase",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/ca",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Get all existing database triggers on one or more SQL instances.",
        "Name":  "Get-DbaDbTrigger",
        "Links":  "https://dbatools.io/Get-DbaDbTrigger",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDbTrigger -SqlInstance sql2017\nReturns all database triggers\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDatabase -SqlInstance sql2017 -Database supa | Get-DbaDbTrigger\nReturns all triggers for database supa on sql2017\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaDbTrigger -SqlInstance sql2017 -Database supa\nReturns all triggers for database supa on sql2017",
        "Syntax":  "Get-DbaDbTrigger [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [[-InputObject] \u003cDatabase[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbUdf",
        "Description":  "Gets database User Defined Functions",
        "Tags":  [
                     "Security",
                     "Database"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to login to SQL Server using alternative credentials",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "To get User Defined Functions from specific database(s)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeSystemUdf",
                           "This switch removes all system objects from the UDF collection",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Get-DbaDatabaseUdf",
        "Author":  "Klaas Vandenberghe (@PowerDbaKlaas)",
        "Synopsis":  "Gets database User Defined Functions",
        "Name":  "Get-DbaDbUdf",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDbUdf -SqlInstance sql2016\nGets all database User Defined Functions\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDbUdf -SqlInstance Server1 -Database db1\nGets the User Defined Functions for the db1 database\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaDbUdf -SqlInstance Server1 -ExcludeDatabase db1\nGets the User Defined Functions for all databases except db1\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaDbUdf -SqlInstance Server1 -ExcludeSystemUdf\nGets the User Defined Functions for all databases that are not system objects (there can be 100+ system User Defined Functions in each DB)\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003e\u0027Sql1\u0027,\u0027Sql2/sqlexpress\u0027 | Get-DbaDbUdf\nGets the User Defined Functions for the databases on Sql1 and Sql2/sqlexpress",
        "Syntax":  "Get-DbaDbUdf [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [-ExcludeSystemUdf] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbUser",
        "Description":  "Gets database users",
        "Tags":  [
                     "Security",
                     "Database"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to login to SQL Server using alternative credentials",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "To get users from specific database(s)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeSystemUser",
                           "This switch removes all system objects from the user collection",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Get-DbaDatabaseUser",
        "Author":  "Klaas Vandenberghe (@PowerDbaKlaas)",
        "Synopsis":  "Gets database users",
        "Name":  "Get-DbaDbUser",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDbUser -SqlInstance sql2016\nGets all database users\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDbUser -SqlInstance Server1 -Database db1\nGets the users for the db1 database\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaDbUser -SqlInstance Server1 -ExcludeDatabase db1\nGets the users for all databases except db1\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaDbUser -SqlInstance Server1 -ExcludeSystemUser\nGets the users for all databases that are not system objects, like \u0027dbo\u0027, \u0027guest\u0027 or \u0027INFORMATION_SCHEMA\u0027\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003e\u0027Sql1\u0027,\u0027Sql2/sqlexpress\u0027 | Get-DbaDbUser\nGets the users for the databases on Sql1 and Sql2/sqlexpress",
        "Syntax":  "Get-DbaDbUser [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [-ExcludeSystemUser] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbView",
        "Description":  "Gets database views for each SqlInstance.",
        "Tags":  [
                     "Security",
                     "Database"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "To get views from specific database(s) - this list is auto populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeSystemView",
                           "This switch removes all system objects from the view collection.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Get-DbaDatabaseView",
        "Author":  "Klaas Vandenberghe (@PowerDbaKlaas)",
        "Synopsis":  "Gets database views for each SqlInstance.",
        "Name":  "Get-DbaDbView",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDbView -SqlInstance sql2016\nGets all database views\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDbView -SqlInstance Server1 -Database db1\nGets the views for the db1 database\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaDbView -SqlInstance Server1 -ExcludeDatabase db1\nGets the views for all databases except db1\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaDbView -SqlInstance Server1 -ExcludeSystemView\nGets the views for all databases that are not system objects (there can be 400+ system views in each DB)\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003e\u0027Sql1\u0027,\u0027Sql2/sqlexpress\u0027 | Get-DbaDbView\nGets the views for the databases on Sql1 and Sql2/sqlexpress",
        "Syntax":  "Get-DbaDbView [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [-ExcludeSystemView] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDbVirtualLogFile",
        "Description":  "Having a transaction log file with too many virtual log files (VLFs) can hurt database performance.\n\nToo many VLFs can cause transaction log backups to slow down and can also slow down database recovery and, in extreme cases, even affect insert/update/delete performance.\n\nReferences:\nhttp://www.sqlskills.com/blogs/kimberly/transaction-log-vlfs-too-many-or-too-few/\nhttp://blogs.msdn.com/b/saponsqlserver/archive/2012/02/22/too-many-virtual-log-files-vlfs-can-cause-slow-database-recovery.aspx\n\nIf you\u0027ve got a high number of VLFs, you can use Expand-SqlTLogResponsibly to reduce the number.",
        "Tags":  [
                     "VLF",
                     "Database",
                     "LogFile"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Specifies the database(s) to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "Specifies the database(s) to exclude from processing. Options for this list are auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "IncludeSystemDBs",
                           "If this switch is enabled, system database information will be displayed.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Returns database virtual log file information for database files on a SQL instance.",
        "Name":  "Get-DbaDbVirtualLogFile",
        "Links":  "https://dbatools.io/Get-DbaDbVirtualLogFile",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDbVirtualLogFile -SqlInstance sqlcluster\nReturns all user database virtual log file details for the sqlcluster instance.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDbVirtualLogFile -SqlInstance sqlserver | Group-Object -Property Database | Where-Object Count -gt 50\nReturns user databases that have 50 or more VLFs.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003e\u0027sqlserver\u0027,\u0027sqlcluster\u0027 | Get-DbaDbVirtualLogFile\nReturns all VLF information for the sqlserver and sqlcluster SQL Server instances. Processes data via the pipeline.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaDbVirtualLogFile -SqlInstance sqlcluster -Database db1, db2\nReturns the VLF counts for the db1 and db2 databases on sqlcluster.",
        "Syntax":  "Get-DbaDbVirtualLogFile [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [-IncludeSystemDBs] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDefaultPath",
        "Description":  "Gets the default SQL Server paths for data, logs and backups",
        "Tags":  "Config",
        "Params":  [
                       [
                           "SqlInstance",
                           "TThe target SQL Server instance or instances.",
                           "ServerInstance,Instance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to login to servers using SQL Logins as opposed to Windows Auth/Integrated/Trusted.",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Gets the default SQL Server paths for data, logs and backups",
        "Name":  "Get-DbaDefaultPath",
        "Links":  "https://dbatools.io/Get-DbaDefaultPath",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDefaultPath -SqlInstance sql01\\sharepoint\nReturns the default file paths for sql01\\sharepoint\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e$servers = \"sql2014\",\"sql2016\", \"sqlcluster\\sharepoint\"\nPS C:\\\u003e $servers | Get-DbaDefaultPath\nReturns the default file paths for \"sql2014\",\"sql2016\" and \"sqlcluster\\sharepoint\"",
        "Syntax":  "Get-DbaDefaultPath [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDependency",
        "Description":  "This function recursively finds all objects that depends on the input.\nIt will then retrieve rich information from them, including their creation scripts and the order in which it should be applied.\n\nBy using the \u0027Parents\u0027 switch, the function will instead retrieve all items that the input depends on (including their creation scripts).\n\nFor more details on dependency, see:\nhttps://technet.microsoft.com/en-us/library/ms345449(v=sql.105).aspx",
        "Tags":  [
                     "Database",
                     "Dependent",
                     "Dependency",
                     "Object"
                 ],
        "Params":  [
                       [
                           "InputObject",
                           "The SMO object to parse",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "AllowSystemObjects",
                           "Normally, system objects are ignored by this function as dependencies.\r\nThis switch overrides that behavior.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Parents",
                           "Causes the function to retrieve all objects that the input depends on, rather than retrieving everything that depends on the input.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "IncludeSelf",
                           "Includes the object whose dependencies are retrieves itself.\r\nUseful when exporting an entire logic structure in order to recreate it in another database.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Finds object dependencies and their relevant creation scripts.",
        "Name":  "Get-DbaDependency",
        "Links":  "https://dbatools.io/Get-DbaDependency",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003e$table = (Get-DbaDatabase -SqlInstance sql2012 -Database Northwind).tables | Where Name -eq Customers\nPS C:\\\u003e $table | Get-DbaDependency\nReturns everything that depends on the \"Customers\" table",
        "Syntax":  "Get-DbaDependency [[-InputObject] \u003cObject\u003e] [-AllowSystemObjects] [-Parents] [-IncludeSelf] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDeprecatedFeature",
        "Description":  "Displays information relating to deprecated features for SQL Server 2005 and above.",
        "Tags":  "Deprecated",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance",
                           "ServerInstance,SqlServer,SqlServers",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternate Windows or SQL Login Authentication. Accepts credential objects (Get-Credential).",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Displays information relating to deprecated features for SQL Server 2005 and above.",
        "Name":  "Get-DbaDeprecatedFeature",
        "Links":  "https://dbatools.io/Get-DbaDeprecatedFeature",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDeprecatedFeature -SqlInstance sql2008, sqlserver2012\nCheck deprecated features for all databases on the servers sql2008 and sqlserver2012.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDeprecatedFeature -SqlInstance sql2008\nCheck deprecated features on server sql2008.",
        "Syntax":  "Get-DbaDeprecatedFeature [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDetachedDatabaseInfo",
        "Description":  "Gathers the following information from detached database files: database name, SQL Server version (compatibility level), collation, and file structure.\n\n\"Data files\" and \"Log file\" report the structure of the data and log files as they were when the database was detached. \"Database version\" is the compatibility level.\n\nMDF files are most easily read by using a SQL Server to interpret them. Because of this, you must specify a SQL Server and the path must be relative to the SQL Server.",
        "Tags":  [
                     "Database",
                     "Detach"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "Source SQL Server. This instance must be online and is required to parse the information contained with in the detached database file.\nThis function will not attach the database file, it will only use SQL Server to read its contents.",
                           "ServerInstance,SqlServer",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "Path",
                           "Specifies the path to the MDF file to be read. This path must be readable by the SQL Server service account. Ideally, the MDF will be located on the SQL Server itself, or on a network share to which \r\nthe SQL Server service account has access.",
                           "Mdf",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Get detailed information about detached SQL Server database files.",
        "Name":  "Get-DbaDetachedDatabaseInfo",
        "Links":  "https://dbatools.io/Get-DbaDetachedDatabaseInfo",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDetachedDatabaseInfo -SqlInstance sql2016 -Path M:\\Archive\\mydb.mdf\nReturns information about the detached database file M:\\Archive\\mydb.mdf using the SQL Server instance sql2016. The M drive is relative to the SQL Server instance.",
        "Syntax":  "Get-DbaDetachedDatabaseInfo [-SqlInstance] \u003cDbaInstanceParameter\u003e [-Path] \u003cString\u003e [[-SqlCredential] \u003cPSCredential\u003e] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDiskSpace",
        "Description":  "Returns a custom object with server name, name of disk, label of disk, total size, free size, percent free, block size and filesystem.\n\nBy default, this function only shows drives of types 2 and 3 (removable disk and local disk).\n\nRequires Windows administrator access on SQL Servers",
        "Tags":  [
                     "Storage",
                     "Disk"
                 ],
        "Params":  [
                       [
                           "ComputerName",
                           "The target computer. Defaults to localhost.",
                           "ServerInstance,SqlInstance,SqlServer",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Credential object used to connect to the computer as a different user.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Unit",
                           "This parameter has been deprecated and will be removed in 1.0.0\r\nAll properties previously generated through this command are present at the same time, but hidden by default.",
                           "",
                           false,
                           "false",
                           "GB"
                       ],
                       [
                           "CheckForSql",
                           "If this switch is enabled, disks will be checked for SQL Server data and log files. Windows Authentication is always used for this.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDrive",
                           "Filter out drives - format is C:\\",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "CheckFragmentation",
                           "If this switch is enabled, fragmentation of all filesystems will be checked.\nThis will increase the runtime of the function by seconds or even minutes per volume.",
                           "Detailed,AllDrives",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Force",
                           "Enabling this switch will cause the command to include ALL drives.\r\nBy default, only local disks and removable disks are shown, and hidden volumes are excluded.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Get-DiskSpace",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net | Jakob Bindslet",
        "Synopsis":  "Displays disk information for all local disk on a server.",
        "Name":  "Get-DbaDiskSpace",
        "Links":  "https://dbatools.io/Get-DbaDiskSpace",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDiskSpace -ComputerName srv0042\nGet disk space for the server srv0042.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDiskSpace -ComputerName srv0042 -Unit MB\nGet disk space for the server srv0042 and displays in megabytes (MB).\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaDiskSpace -ComputerName srv0042, srv0007 -Unit TB\nGet disk space from two servers and displays in terabytes (TB).\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaDiskSpace -ComputerName srv0042 -Force\nGet all disk and volume space information.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eGet-DbaDiskSpace -ComputerName srv0042 -ExcludeDrive \u0027C:\\\u0027\nGet all disk and volume space information.",
        "Syntax":  "Get-DbaDiskSpace [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [[-Unit] \u003cString\u003e] [-CheckForSql] [[-SqlCredential] \u003cPSCredential\u003e] [[-ExcludeDrive] \u003cString[]\u003e] [-CheckFragmentation] [-Force] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaDump",
        "Description":  "The type of dump included in the search include minidump, all-thread dump, or a full dump.  The files have an extendion of .mdmp.",
        "Tags":  [
                     "Engine",
                     "Corruption"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Garry Bargsley (@gbargsley), http://blog.garrybargsley.com",
        "Synopsis":  "Locate a SQL Server that has generated any memory dump files.",
        "Name":  "Get-DbaDump",
        "Links":  "https://dbatools.io/Get-DbaDump",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDump -SqlInstance sql2016\nShows the detailed information for memory dump(s) located on sql2016 instance\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDump -SqlInstance sql2016 -SqlCredential sqladmin\nShows the detailed information for memory dump(s) located on sql2016 instance. Logs into the SQL Server using the SQL login \u0027sqladmin\u0027",
        "Syntax":  "Get-DbaDump [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaEndpoint",
        "Description":  "Returns endpoint objects from a SQL Server instance.",
        "Tags":  "Endpoint",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Endpoint",
                           "Return only specific endpoints.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Type",
                           "Return only specific types of endpoints. Options include: DatabaseMirroring, ServiceBroker, Soap, and TSql.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Garry Bargsley (@gbargsley), http://blog.garrybargsley.com",
        "Synopsis":  "Returns endpoint objects from a SQL Server instance.",
        "Name":  "Get-DbaEndpoint",
        "Links":  "https://dbatools.io/Get-DbaEndpoint",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaEndpoint -SqlInstance localhost\nReturns all endpoints on the local default SQL Server instance\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaEndpoint -SqlInstance localhost, sql2016\nReturns all endpoints for the local and sql2016 SQL Server instances",
        "Syntax":  "Get-DbaEndpoint [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Endpoint \u003cString[]\u003e] [-Type \u003cString[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaErrorLog",
        "Description":  "Gets the \"SQL Error Log\" of an instance. Returns all 10 error logs by default.",
        "Tags":  [
                     "Instance",
                     "ErrorLog"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "TThe target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to login to servers using SQL Logins as opposed to Windows Auth/Integrated/Trusted.",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "LogNumber",
                           "An Int32 value that specifies the index number of the error log required.\r\nError logs are listed 0 through 99, where 0 is the current error log and 99 is potential oldest log file.\nSQL Server errorlog rollover defaults to 6, but can be increased to 99. https://docs.microsoft.com/en-us/sql/database-engine/configure-windows/scm-services-configure-sql-server-error-logs",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Source",
                           "Filter results based on the Source of the error (e.g. Logon, Server, etc.)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Text",
                           "Filter results based on a pattern of text (e.g. \"login failed\", \"error: 12345\").",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "After",
                           "Filter the results based on datetime value.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Before",
                           "Filter the results based on datetime value.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Get-DbaLog",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Gets the \"SQL Error Log\" of an instance",
        "Name":  "Get-DbaErrorLog",
        "Links":  "https://dbatools.io/Get-DbaErrorLog",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaErrorLog -SqlInstance sql01\\sharepoint\nReturns every log entry from sql01\\sharepoint SQL Server instance.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaErrorLog -SqlInstance sql01\\sharepoint -LogNumber 3, 6\nReturns all log entries for log number 3 and 6 on sql01\\sharepoint SQL Server instance.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaErrorLog -SqlInstance sql01\\sharepoint -Source Logon\nReturns every log entry, with a source of Logon, from sql01\\sharepoint SQL Server instance.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaErrorLog -SqlInstance sql01\\sharepoint -LogNumber 3 -Text \"login failed\"\nReturns every log entry for log number 3, with \"login failed\" in the text, from sql01\\sharepoint SQL Server instance.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003e$servers = \"sql2014\",\"sql2016\", \"sqlcluster\\sharepoint\"\nPS C:\\\u003e $servers | Get-DbaErrorLog -LogNumber 0\nReturns the most recent SQL Server error logs for \"sql2014\",\"sql2016\" and \"sqlcluster\\sharepoint\"\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eGet-DbaErrorLog -SqlInstance sql01\\sharepoint -After \u00272016-11-14 00:00:00\u0027\nReturns every log entry found after the date 14 November 2016 from sql101\\sharepoint SQL Server instance.\n-------------------------- EXAMPLE 7 --------------------------\nPS C:\\\u003eGet-DbaErrorLog -SqlInstance sql01\\sharepoint -Before \u00272016-08-16 00:00:00\u0027\nReturns every log entry found before the date 16 August 2016 from sql101\\sharepoint SQL Server instance.",
        "Syntax":  "Get-DbaErrorLog [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-LogNumber] \u003cInt32[]\u003e] [[-Source] \u003cObject[]\u003e] [[-Text] \u003cString\u003e] [[-After] \u003cDateTime\u003e] [[-Before] \u003cDateTime\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaErrorLogConfig",
        "Description":  "Pulls the configuration for the ErrorLog on a given SQL Server instance.\n\nIncludes error log path, number of log files configured and size (SQL Server 2012+ only)",
        "Tags":  [
                     "Instance",
                     "ErrorLog"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Shawn Melton (@wsmelton), https://wsmelton.github.io",
        "Synopsis":  "Pulls the configuration for the ErrorLog on a given SQL Server instance",
        "Name":  "Get-DbaErrorLogConfig",
        "Links":  "https://dbatools.io/Get-DbaErrorLogConfig",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaErrorLogConfig -SqlInstance server2017,server2014\nReturns error log configuration for server2017 and server2014",
        "Syntax":  "Get-DbaErrorLogConfig [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaEstimatedCompletionTime",
        "Description":  "Gets execution and estimated completion time information for queries\n\nPercent complete will show for the following commands\n\nALTER INDEX REORGANIZE\nAUTO_SHRINK option with ALTER DATABASE\nBACKUP DATABASE\nDBCC CHECKDB\nDBCC CHECKFILEGROUP\nDBCC CHECKTABLE\nDBCC INDEXDEFRAG\nDBCC SHRINKDATABASE\nDBCC SHRINKFILE\nRECOVERY\nRESTORE DATABASE\nROLLBACK\nTDE ENCRYPTION\n\nFor additional information, check out https://blogs.sentryone.com/loriedwards/patience-dm-exec-requests/ and https://docs.microsoft.com/en-us/sql/relational-databases/system-dynamic-management-views/sys-dm-exec-requests-transact-sql",
        "Tags":  "Database",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "SqlCredential object used to connect to the SQL Server as a different user.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Gets execution and estimated completion time information for queries",
        "Name":  "Get-DbaEstimatedCompletionTime",
        "Links":  "https://dbatools.io/Get-DbaEstimatedCompletionTime",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaEstimatedCompletionTime -SqlInstance sql2016\nGets estimated completion times for queries performed against the entire server\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaEstimatedCompletionTime -SqlInstance sql2016 | Select *\nGets estimated completion times for queries performed against the entire server PLUS the SQL query text of each command\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaEstimatedCompletionTime -SqlInstance sql2016 | Where-Object { $_.Text -match \u0027somequerytext\u0027 }\nGets results for commands whose queries only match specific text (match is like LIKE but way more powerful)\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaEstimatedCompletionTime -SqlInstance sql2016 -Database Northwind,pubs,Adventureworks2014\nGets estimated completion times for queries performed against the Northwind, pubs, and Adventureworks2014 databases",
        "Syntax":  "Get-DbaEstimatedCompletionTime [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaExecutionPlan",
        "Description":  "Gets execution plans and metadata. Can pipe to Export-DbaExecutionPlan\n\nThanks to following for the queries:\nhttps://www.simple-talk.com/sql/t-sql-programming/dmvs-for-query-plan-metadata/\nhttp://www.scarydba.com/2017/02/13/export-plans-cache-sqlplan-file/",
        "Tags":  "Performance",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Credential object used to connect to the SQL Server as a different user",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Return execution plans and metadata for only specific databases.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "Return execution plans and metadata for all but these specific databases",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SinceCreation",
                           "Datetime object used to narrow the results to a date",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SinceLastExecution",
                           "Datetime object used to narrow the results to a date",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeEmptyQueryPlan",
                           "Exclude results with empty query plan",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Force",
                           "Returns a ton of raw information about the execution plans",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Gets execution plans and metadata",
        "Name":  "Get-DbaExecutionPlan",
        "Links":  "https://dbatools.io/Get-DbaExecutionPlan",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaExecutionPlan -SqlInstance sqlserver2014a\nGets all execution plans on  sqlserver2014a\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaExecutionPlan -SqlInstance sqlserver2014a -Database db1, db2 -SinceLastExecution \u00272016-07-01 10:47:00\u0027\nGets all execution plans for databases db1 and db2 on sqlserver2014a since July 1, 2016 at 10:47 AM.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaExecutionPlan -SqlInstance sqlserver2014a, sql2016 -Exclude db1 | Format-Table\nGets execution plan info for all databases except db1 on sqlserver2014a and sql2016 and makes the output pretty\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaExecutionPlan -SqlInstance sql2014 -Database AdventureWorks2014, pubs -Force\nGets super detailed information for execution plans on only for AdventureWorks2014 and pubs\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003e$servers = \"sqlserver2014a\",\"sql2016t\"\nPS C:\\\u003e $servers | Get-DbaExecutionPlan -Force\nGets super detailed information for execution plans on sqlserver2014a and sql2016",
        "Syntax":  "Get-DbaExecutionPlan [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [[-SinceCreation] \u003cDateTime\u003e] [[-SinceLastExecution] \u003cDateTime\u003e] [-ExcludeEmptyQueryPlan] [-Force] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaFeature",
        "Description":  "Runs the SQL Server feature discovery report (setup.exe /Action=RunDiscovery)\n\nInspired by Dave Mason\u0027s (@BeginTry) post at\nhttps://itsalljustelectrons.blogspot.be/2018/04/SQL-Server-Discovery-Report.html\n\nAssumptions:\n1. The sub-folder \"Microsoft SQL Server\" exists in $env:ProgramFiles,\neven if SQL was installed to a non-default path. This has been\nverified on SQL 2008R2 and SQL 2012. Further verification may be needed.\n2. The discovery report displays installed components for the version of SQL\nServer associated with setup.exe, along with installed components of all\nlesser versions of SQL Server that are installed.",
        "Tags":  [
                     "Feature",
                     "Component"
                 ],
        "Params":  [
                       [
                           "ComputerName",
                           "The target computer. If the target is not localhost, it must have PowerShell remoting enabled.\nNote that this is not the SqlInstance, but rather the ComputerName",
                           "",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Allows you to login to servers using alternative credentials. To use:\n$cred = Get-Credential, then pass $cred object to the -Credential parameter.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Get-DbaSqlFeature",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Runs the SQL Server feature discovery report (setup.exe /Action=RunDiscovery)",
        "Name":  "Get-DbaFeature",
        "Links":  "https://dbatools.io/Get-DbaFeature",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaFeature -ComputerName sql2017, sql2016, sql2005\nGets all SQL Server features for all instances on sql2017, sql2016 and sql2005.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaFeature -Verbose\nGets all SQL Server features for all instances on localhost. Outputs to screen if no instances are found.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaFeature -ComputerName sql2017 -Credential ad\\sqldba\nGets all SQL Server features for all instances on sql2017 using the ad\\sqladmin credential (which has access to the Windows Server).",
        "Syntax":  "Get-DbaFeature [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaFile",
        "Description":  "This command searches all specified directories, allowing a DBA to see file information on a server without direct access\n\nYou can filter by extension using the -FileType parameter. By default, the default data directory will be returned. You can provide and additional paths to search using the -Path parameter.\n\nThanks to serg-52 for the query:  https://www.sqlservercentral.com/Forums/Topic1642213-391-1.aspx",
        "Tags":  "Discovery",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to login to servers using alternative credentials",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Path",
                           "Used to specify extra directories to search in addition to the default data directory.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "FileType",
                           "Used to specify filter by filetype. No dot required, just pass the extension.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Depth",
                           "Used to specify recursive folder depth.  Default is 1, non-recursive.",
                           "",
                           false,
                           "false",
                           "1"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Brandon Abshire, netnerds.net",
        "Synopsis":  "Get-DbaFile finds files in any directory specified on a remote SQL Server",
        "Name":  "Get-DbaFile",
        "Links":  "https://dbatools.io/Get-DbaFile",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaFile -SqlInstance sqlserver2014a -Path E:\\Dir1\nLogs into the SQL Server \"sqlserver2014a\" using Windows credentials and searches E:\\Dir for all files\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaFile -SqlInstance sqlserver2014a -SqlCredential $cred -Path \u0027E:\\sql files\u0027\nLogs into the SQL Server \"sqlserver2014a\" using alternative credentials and returns all files in \u0027E:\\sql files\u0027\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003e$all = Get-DbaDefaultPath -SqlInstance sql2014\nPS C:\\\u003e Get-DbaFile -SqlInstance sql2014 -Path $all.Data, $all.Log, $all.Backup -Depth 3\nReturns the files in the default data, log and backup directories on sql2014, 3 directories deep (recursively).\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaFile -SqlInstance sql2014 -Path \u0027E:\\Dir1\u0027, \u0027E:\\Dir2\u0027\nReturns the files in \"E:\\Dir1\" and \"E:Dir2\" on sql2014\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eGet-DbaFile -SqlInstance sql2014, sql2016 -Path \u0027E:\\Dir1\u0027 -FileType fsf, mld\nFinds files in E:\\Dir1 ending with \".fsf\" and \".mld\" for both the servers sql2014 and sql2016.",
        "Syntax":  "Get-DbaFile [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Path] \u003cString[]\u003e] [[-FileType] \u003cString[]\u003e] [[-Depth] \u003cInt32\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaFilestream",
        "Description":  "Returns the status of Filestream on specified SQL Server for both the Service and Instance levels.",
        "Tags":  "Filestream",
        "Params":  [
                       [
                           "SqlInstance",
                           "SQL Server name or SMO object representing the SQL Server to connect to. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Credential",
                           "Login to the target Windows server using alternative credentials.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Stuart Moore ( @napalmgram ) | Chrissy LeMaire ( @cl )",
        "Synopsis":  "Returns the status of Filestream on specified SQL Server for both the Service and Instance levels.",
        "Name":  "Get-DbaFilestream",
        "Links":  "https://dbatools.io/Get-DbaFilestream",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaFilestream -SqlInstance server1\\instance2\nWill return the status of Filestream configuration for the service and instance server1\\instance2\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaFilestream -SqlInstance server1\\instance2 -SqlCredential sqladmin\nPrompts for the password to the SQL Login \"sqladmin\" then returns the status of Filestream configuration for the service and instance server1\\instance2",
        "Syntax":  "Get-DbaFilestream [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Credential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaForceNetworkEncryption",
        "Description":  "Gets Force Encryption settings for a SQL Server instance. Note that this requires access to the Windows Server - not the SQL instance itself.\n\nThis setting is found in Configuration Manager.",
        "Tags":  "Certificate",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. Defaults to localhost.",
                           "ServerInstance,SqlServer,ComputerName",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Allows you to login to the computer (not sql instance) using alternative Windows credentials",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Gets Force Encryption settings for a SQL Server instance",
        "Name":  "Get-DbaForceNetworkEncryption",
        "Links":  "https://dbatools.io/Get-DbaForceNetworkEncryption",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaForceNetworkEncryption\nGets Force Encryption properties on the default (MSSQLSERVER) instance on localhost - requires (and checks for) RunAs admin.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaForceNetworkEncryption -SqlInstance sql01\\SQL2008R2SP2\nGets Force Network Encryption for the SQL2008R2SP2 on sql01. Uses Windows Credentials to both login and view the registry.",
        "Syntax":  "Get-DbaForceNetworkEncryption [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaHelpIndex",
        "Description":  "This function will return detailed information on indexes (and optionally statistics) for all indexes in a database, or a given index should one be passed along.\nAs this uses SQL Server DMVs to access the data it will only work in 2005 and up (sorry folks still running SQL Server 2000).\nFor performance reasons certain statistics information will not be returned from SQL Server 2005 if an ObjectName is not provided.\n\nThe data includes:\n- ObjectName: the table containing the index\n- IndexType: clustered/non-clustered/columnstore and whether the index is unique/primary key\n- KeyColumns: the key columns of the index\n- IncludeColumns: any include columns in the index\n- FilterDefinition: any filter that may have been used in the index\n- DataCompression: row/page/none depending upon whether or not compression has been used\n- IndexReads: the number of reads of the index since last restart or index rebuild\n- IndexUpdates: the number of writes to the index since last restart or index rebuild\n- SizeKB: the size the index in KB\n- IndexRows: the number of the rows in the index (note filtered indexes will have fewer rows than exist in the table)\n- IndexLookups: the number of lookups that have been performed (only applicable for the heap or clustered index)\n- MostRecentlyUsed: when the index was most recently queried (default to 1900 for when never read)\n- StatsSampleRows: the number of rows queried when the statistics were built/rebuilt (not included in SQL Server 2005 unless ObjectName is specified)\n- StatsRowMods: the number of changes to the statistics since the last rebuild\n- HistogramSteps: the number of steps in the statistics histogram (not included in SQL Server 2005 unless ObjectName is specified)\n- StatsLastUpdated: when the statistics were last rebuilt (not included in SQL Server 2005 unless ObjectName is specified)",
        "Tags":  "Index",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process. This list is auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude. This list is auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Allows piping from Get-DbaDatabase",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "ObjectName",
                           "The name of a table for which you want to obtain the index information. If the two part naming convention for an object is not used it will use the default schema for the executing user. If not \r\npassed it will return data on all indexes in a given database.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "IncludeStats",
                           "If this switch is enabled, statistics as well as indexes will be returned in the output (statistics information such as the StatsRowMods will always be returned for indexes).",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "IncludeDataTypes",
                           "If this switch is enabled, the output will include the data type of each column that makes up a part of the index definition (key and include columns).",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Raw",
                           "If this switch is enabled, results may be less user-readable but more suitable for processing by other code.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "IncludeFragmentation",
                           "If this switch is enabled, the output will include fragmentation information.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Nic Cain, https://sirsql.net/",
        "Synopsis":  "Returns size, row and configuration information for indexes in databases.",
        "Name":  "Get-DbaHelpIndex",
        "Links":  "https://dbatools.io/Get-DbaHelpIndex",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaHelpIndex -SqlInstance localhost -Database MyDB\nReturns information on all indexes on the MyDB database on the localhost.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaHelpIndex -SqlInstance localhost -Database MyDB,MyDB2\nReturns information on all indexes on the MyDB \u0026 MyDB2 databases.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaHelpIndex -SqlInstance localhost -Database MyDB -ObjectName dbo.Table1\nReturns index information on the object dbo.Table1 in the database MyDB.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaHelpIndex -SqlInstance localhost -Database MyDB -ObjectName dbo.Table1 -IncludeStats\nReturns information on the indexes and statistics for the table dbo.Table1 in the MyDB database.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eGet-DbaHelpIndex -SqlInstance localhost -Database MyDB -ObjectName dbo.Table1 -IncludeDataTypes\nReturns the index information for the table dbo.Table1 in the MyDB database, and includes the data types for the key and include columns.\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eGet-DbaHelpIndex -SqlInstance localhost -Database MyDB -ObjectName dbo.Table1 -Raw\nReturns the index information for the table dbo.Table1 in the MyDB database, and returns the numerical data without localized separators.\n-------------------------- EXAMPLE 7 --------------------------\nPS C:\\\u003eGet-DbaHelpIndex -SqlInstance localhost -Database MyDB -IncludeStats -Raw\nReturns the index information for all indexes in the MyDB database as well as their statistics, and formats the numerical data without localized separators.\n-------------------------- EXAMPLE 8 --------------------------\nPS C:\\\u003eGet-DbaHelpIndex -SqlInstance localhost -Database MyDB -IncludeFragmentation\nReturns the index information for all indexes in the MyDB database as well as their fragmentation\n-------------------------- EXAMPLE 9 --------------------------\nPS C:\\\u003eGet-DbaDatabase -SqlInstance sql2017 -Database MyDB | Get-DbaHelpIndex\nReturns the index information for all indexes in the MyDB database",
        "Syntax":  "Get-DbaHelpIndex [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [[-InputObject] \u003cDatabase[]\u003e] [[-ObjectName] \u003cString\u003e] [-IncludeStats] [-IncludeDataTypes] [-Raw] [-IncludeFragmentation] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaInstanceProperty",
        "Description":  "The Get-DbaInstanceProperty command gets SQL Server instance properties from the SMO object sqlserver.",
        "Tags":  [
                     "Instance",
                     "Configure",
                     "Configuration"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InstanceProperty",
                           "SQL Server instance property(ies) to include.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeInstanceProperty",
                           "SQL Server instance property(ies) to exclude.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Get-DbaSqlInstanceProperty",
        "Author":  "Klaas Vandenberghe (@powerdbaklaas)",
        "Synopsis":  "Gets SQL Server instance properties of one or more instance(s) of SQL Server.",
        "Name":  "Get-DbaInstanceProperty",
        "Links":  "https://dbatools.io/Get-DbaInstanceProperty",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaInstanceProperty -SqlInstance localhost\nReturns SQL Server instance properties on the local default SQL Server instance\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaInstanceProperty -SqlInstance sql2, sql4\\sqlexpress\nReturns SQL Server instance properties on default instance on sql2 and sqlexpress instance on sql4\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003e\u0027sql2\u0027,\u0027sql4\u0027 | Get-DbaInstanceProperty\nReturns SQL Server instance properties on sql2 and sql4\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaInstanceProperty -SqlInstance sql2,sql4 -InstanceProperty DefaultFile\nReturns SQL Server instance property DefaultFile on instance sql2 and sql4\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eGet-DbaInstanceProperty -SqlInstance sql2,sql4 -ExcludeInstanceProperty DefaultFile\nReturns all SQL Server instance properties except DefaultFile on instance sql2 and sql4\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003e$cred = Get-Credential sqladmin\nPS C:\\\u003e Get-DbaInstanceProperty -SqlInstance sql2 -SqlCredential $cred\nConnects using sqladmin credential and returns SQL Server instance properties from sql2",
        "Syntax":  "Get-DbaInstanceProperty [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-InstanceProperty \u003cObject[]\u003e] [-ExcludeInstanceProperty \u003cObject[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaInstanceUserOption",
        "Description":  "The Get-DbaInstanceUserOption command gets SQL Instance user options from the SMO object sqlserver.",
        "Tags":  [
                     "Instance",
                     "Configure",
                     "UserOption"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.\r\nThis can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Get-DbaSqlInstanceUserOption",
        "Author":  "Klaas Vandenberghe (@powerdbaklaas)",
        "Synopsis":  "Gets SQL Instance user options of one or more instance(s) of SQL Server.",
        "Name":  "Get-DbaInstanceUserOption",
        "Links":  "https://dbatools.io/Get-DbaInstanceUserOption",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaInstanceUserOption -SqlInstance localhost\nReturns SQL Instance user options on the local default SQL Server instance\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaInstanceUserOption -SqlInstance sql2, sql4\\sqlexpress\nReturns SQL Instance user options on default instance on sql2 and sqlexpress instance on sql4\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003e\u0027sql2\u0027,\u0027sql4\u0027 | Get-DbaInstanceUserOption\nReturns SQL Instance user options on sql2 and sql4",
        "Syntax":  "Get-DbaInstanceUserOption [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaIoLatency",
        "Description":  "This command is based off of Paul Randal\u0027s post \"Advanced SQL Server performance tuning\"\n\nReturns both raw and aggregate information\n\nReference:  https://www.sqlskills.com/blogs/paul/how-to-examine-io-subsystem-latencies-from-within-sql-server/\n            https://www.sqlskills.com/blogs/paul/capturing-io-latencies-period-time/",
        "Tags":  "IOLatency",
        "Params":  [
                       [
                           "SqlInstance",
                           "The SQL Server instance. Server version must be SQL Server version 2008 or higher.",
                           "ServerInstance,SqlServer,SqlServers",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Patrick Flynn (@sqllensman)",
        "Synopsis":  "Displays IO subsystem latency statistics from sys.dm_io_virtual_file_stats.  Works on SQL Server 2005 and above.",
        "Name":  "Get-DbaIoLatency",
        "Links":  "https://dbatools.io/Get-DbaIoLatency",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaIoLatency -SqlInstance sql2008, sqlserver2012\nGet IO subsystem latency statistics for servers sql2008 and sqlserver2012.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e$output = Get-DbaIoLatency -SqlInstance sql2008 | Select * | ConvertTo-DbaDataTable\nCollects all IO subsystem latency statistics on server sql2008 into a Data Table.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003e\u0027sql2008\u0027,\u0027sqlserver2012\u0027 | Get-DbaIoLatency\nGet IO subsystem latency statistics for servers sql2008 and sqlserver2012 via pipline\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003e$cred = Get-Credential sqladmin\nPS C:\\\u003e Get-DbaIoLatency -SqlInstance sql2008 -SqlCredential $cred\nConnects using sqladmin credential and returns IO subsystem latency statistics from sql2008",
        "Syntax":  "Get-DbaIoLatency [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaLastBackup",
        "Description":  "Retrieves and compares the date/time for the last known backups, as well as the creation date/time for the database.\n\nDefault output includes columns Server, Database, RecoveryModel, LastFullBackup, LastDiffBackup, LastLogBackup, SinceFull, SinceDiff, SinceLog, Status, DatabaseCreated, DaysSinceDbCreated.",
        "Tags":  [
                     "DisasterRecovery",
                     "Backup"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Specifies one or more database(s) to process. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "Specifies one or more database(s) to exclude from processing.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "If this switch is enabled exceptions will be thrown to the caller, which will need to perform its own exception processing. Otherwise, the function will try to catch the exception, interpret it and \r\nprovide a friendly error message.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Klaas Vandenberghe (@PowerDBAKlaas)",
        "Synopsis":  "Get date/time for last known backups of databases.",
        "Name":  "Get-DbaLastBackup",
        "Links":  "https://dbatools.io/Get-DbaLastBackup",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaLastBackup -SqlInstance ServerA\\sql987\nReturns a custom object displaying Server, Database, RecoveryModel, LastFullBackup, LastDiffBackup, LastLogBackup, SinceFull, SinceDiff, SinceLog, Status, DatabaseCreated, DaysSinceDbCreated\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaLastBackup -SqlInstance ServerA\\sql987\nReturns a custom object with Server name, Database name, and the date the last time backups were performed.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaLastBackup -SqlInstance ServerA\\sql987 | Select *\nReturns a custom object with Server name, Database name, and the date the last time backups were performed, and also recoverymodel and calculations on how long ago backups were taken and what the \r\nstatus is.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaLastBackup -SqlInstance ServerA\\sql987 | Select * | Out-Gridview\nReturns a gridview displaying Server, Database, RecoveryModel, LastFullBackup, LastDiffBackup, LastLogBackup, SinceFull, SinceDiff, SinceLog, Status, DatabaseCreated, DaysSinceDbCreated.",
        "Syntax":  "Get-DbaLastBackup [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaLastGoodCheckDb",
        "Description":  "Retrieves and compares the date/time for the last known good DBCC CHECKDB, as well as the creation date/time for the database.\n\nThis function supports SQL Server 2005 and higher.\n\nPlease note that this script uses the DBCC DBINFO() WITH TABLERESULTS. DBCC DBINFO has several known weak points, such as:\n- DBCC DBINFO is an undocumented feature/command.\n- The LastKnowGood timestamp is updated when a DBCC CHECKFILEGROUP is performed.\n- The LastKnowGood timestamp is updated when a DBCC CHECKDB WITH PHYSICAL_ONLY is performed.\n- The LastKnowGood timestamp does not get updated when a database in READ_ONLY.\n\nAn empty ($null) LastGoodCheckDb result indicates that a good DBCC CHECKDB has never been performed.\n\nSQL Server 2008R2 has a \"bug\" that causes each databases to possess two dbi_dbccLastKnownGood fields, instead of the normal one.\n\nThis script will only display this function to only display the newest timestamp. If -Verbose is specified, the function will announce every time more than one dbi_dbccLastKnownGood fields is encountered.",
        "Tags":  [
                     "CHECKDB",
                     "Database"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. Defaults to localhost.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Specifies one or more database(s) to process. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "Specifies one or more database(s) to exclude from processing.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Jakob Bindslet ([email protected])",
        "Synopsis":  "Get date/time for last known good DBCC CHECKDB",
        "Name":  "Get-DbaLastGoodCheckDb",
        "Links":  "https://dbatools.io/Get-DbaLastGoodCheckDb",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaLastGoodCheckDb -SqlInstance ServerA\\sql987\nReturns a custom object displaying Server, Database, DatabaseCreated, LastGoodCheckDb, DaysSinceDbCreated, DaysSinceLastGoodCheckDb, Status and DataPurityEnabled\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaLastGoodCheckDb -SqlInstance ServerA\\sql987 -SqlCredential sqladmin | Format-Table -AutoSize\nReturns a formatted table displaying Server, Database, DatabaseCreated, LastGoodCheckDb, DaysSinceDbCreated, DaysSinceLastGoodCheckDb, Status and DataPurityEnabled. Authenticates using SQL Server \r\nauthentication.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaLastGoodCheckDb -SqlInstance sql2016 -ExcludeDatabase \"TempDB\" | Format-Table -AutoSize\nReturns a formatted table displaying Server, Database, DatabaseCreated, LastGoodCheckDb, DaysSinceDbCreated, DaysSinceLastGoodCheckDb, Status and DataPurityEnabled. All databases except for \"TempDB\" \r\nwill be displayed in the output.",
        "Syntax":  "Get-DbaLastGoodCheckDb [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaLatchStatistic",
        "Description":  "This command is based off of Paul Randal\u0027s post \"Advanced SQL Server performance tuning\"\n\nReturns:\n        LatchClass\n        WaitSeconds\n        WaitCount\n        Percentage\n        AverageWaitSeconds\n        URL\n\nReference:  https://www.sqlskills.com/blogs/paul/advanced-performance-troubleshooting-waits-latches-spinlocks/\n            https://www.sqlskills.com/blogs/paul/most-common-latch-classes-and-what-they-mean/",
        "Tags":  [
                     "LatchStatistics",
                     "Waits"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The SQL Server instance. Server version must be SQL Server version 2005 or higher.",
                           "ServerInstance,SqlServer,SqlServers",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Threshold",
                           "Threshold, in percentage of all latch stats on the system. Default per Paul\u0027s post is 95%.",
                           "",
                           false,
                           "false",
                           "95"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Patrick Flynn (@sqllensman)",
        "Synopsis":  "Displays latch statistics from sys.dm_os_latch_stats",
        "Name":  "Get-DbaLatchStatistic",
        "Links":  "https://dbatools.io/Get-DbaLatchStatistic",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaLatchStatistic -SqlInstance sql2008, sqlserver2012\nCheck latch statistics for servers sql2008 and sqlserver2012\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaLatchStatistic -SqlInstance sql2008 -Threshold 98\nCheck latch statistics on server sql2008 for thresholds above 98%\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003e$output = Get-DbaLatchStatistic -SqlInstance sql2008 -Threshold 100 | Select * | ConvertTo-DbaDataTable\nCollects all latch statistics on server sql2008 into a Data Table.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003e\u0027sql2008\u0027,\u0027sqlserver2012\u0027 | Get-DbaLatchStatistic\nGet latch statistics for servers sql2008 and sqlserver2012 via pipline\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003e$cred = Get-Credential sqladmin\nPS C:\\\u003e Get-DbaLatchStatistic -SqlInstance sql2008 -SqlCredential $cred\nConnects using sqladmin credential and returns latch statistics from sql2008\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003e$output = Get-DbaLatchStatistic -SqlInstance sql2008\nPS C:\\\u003e $output\r\nPS C:\\\u003e foreach ($row in ($output | Sort-Object -Unique Url)) { Start-Process ($row).Url }\nDisplays the output then loads the associated sqlskills website for each result. Opens one tab per unique URL.",
        "Syntax":  "Get-DbaLatchStatistic [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Threshold] \u003cInt32\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaLinkedServer",
        "Description":  "Retrieves information about each linked server on the instance(s).",
        "Tags":  [
                     "LinkedServer",
                     "Linked"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function\r\nto be executed against multiple SQL Server instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "LinkedServer",
                           "The linked server(s) to process - this list is auto-populated from the server. If unspecified, all linked servers will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeLinkedServer",
                           "The linked server(s) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Stephen Bennett, https://sqlnotesfromtheunderground.wordpress.com/",
        "Synopsis":  "Gets all linked servers and a summary of information from the linked servers listed.",
        "Name":  "Get-DbaLinkedServer",
        "Links":  "https://dbatools.io/Get-DbaLinkedServer",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaLinkedServer -SqlInstance DEV01\nReturns all linked servers for the SQL Server instance DEV01\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaCmsRegServer -SqlInstance DEV01 -Group SQLDEV | Get-DbaLinkedServer | Out-GridView\nReturns all linked servers for a group of servers from SQL Server Central Management Server (CMS). Send output to GridView.",
        "Syntax":  "Get-DbaLinkedServer [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-LinkedServer] \u003cObject[]\u003e] [[-ExcludeLinkedServer] \u003cObject[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaLocaleSetting",
        "Description":  "Gets the Locale settings on one or more computers.\n\nRequires Local Admin rights on destination computer(s).",
        "Tags":  "OS",
        "Params":  [
                       [
                           "ComputerName",
                           "The target SQL Server instance or instances.",
                           "cn,host,Server",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Credential object used to connect to the computer as a different user.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Klaas Vandenberghe (@PowerDBAKlaas)",
        "Synopsis":  "Gets the Locale settings on a computer.",
        "Name":  "Get-DbaLocaleSetting",
        "Links":  "https://dbatools.io/Get-DbaLocaleSetting",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaLocaleSetting -ComputerName sqlserver2014a\nGets the Locale settings on computer sqlserver2014a.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e\u0027sql1\u0027,\u0027sql2\u0027,\u0027sql3\u0027 | Get-DbaLocaleSetting\nGets the Locale settings on computers sql1, sql2 and sql3.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaLocaleSetting -ComputerName sql1,sql2 -SqlCredential $credential | Out-Gridview\nGets the Locale settings on computers sql1 and sql2 using SQL Authentication to authenticate to the servers, and shows them in a grid view.",
        "Syntax":  "Get-DbaLocaleSetting [[-ComputerName] \u003cString[]\u003e] [[-Credential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaLogin",
        "Description":  "The Get-DbaLogin function returns an SMO Login object for the logins passed, if there are no users passed it will return all logins.",
        "Tags":  [
                     "Login",
                     "Security"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.You must have sysadmin access and server version must be SQL Server version 2000 or higher.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to login to servers using SQL Logins as opposed to Windows Auth/Integrated/Trusted.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Login",
                           "The login(s) to process - this list is auto-populated from the server. If unspecified, all logins will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "IncludeFilter",
                           "A list of logins to include - accepts wildcard patterns",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeLogin",
                           "The login(s) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeFilter",
                           "A list of logins to exclude - accepts wildcard patterns",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeSystemLogin",
                           "A Switch to remove System Logins from the output.",
                           "ExcludeSystemLogins",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Type",
                           "Filters logins by their type. Valid options are Windows and SQL.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "HasAccess",
                           "A Switch to return Logins that have access to the instance of SQL Server.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "SqlLogins",
                           "Deprecated. Please use -Type SQL",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WindowsLogins",
                           "Deprecated. Please use -Type Windows.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Locked",
                           "A Switch to return locked Logins.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Disabled",
                           "A Switch to return disabled Logins.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Mitchell Hamann (@SirCaptainMitch) | Rob Sewell (@SQLDBaWithBeard)",
        "Synopsis":  "Function to get an SMO login object of the logins for a given SQL Server instance. Takes a server object from the pipeline.",
        "Name":  "Get-DbaLogin",
        "Links":  "https://dbatools.io/Get-DbaLogin",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaLogin -SqlInstance sql2016\nGets all the logins from server sql2016 using NT authentication and returns the SMO login objects\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaLogin -SqlInstance sql2016 -SqlCredential $sqlcred\nGets all the logins for a given SQL Server using a passed credential object and returns the SMO login objects\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaLogin -SqlInstance sql2016 -SqlCredential $sqlcred -Login dbatoolsuser,TheCaptain\nGet specific logins from server sql2016 returned as SMO login objects.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaLogin -SqlInstance sql2016 -IncludeFilter \u0027##*\u0027,\u0027NT *\u0027\nGet all user objects from server sql2016 beginning with \u0027##\u0027 or \u0027NT \u0027, returned as SMO login objects.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eGet-DbaLogin -SqlInstance sql2016 -ExcludeLogin dbatoolsuser\nGet all user objects from server sql2016 except the login dbatoolsuser, returned as SMO login objects.\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eGet-DbaLogin -SqlInstance sql2016 -Type Windows\nGet all user objects from server sql2016 that are Windows Logins\n-------------------------- EXAMPLE 7 --------------------------\nPS C:\\\u003eGet-DbaLogin -SqlInstance sql2016 -Type Windows -IncludeFilter *Rob*\nGet all user objects from server sql2016 that are Windows Logins and have Rob in the name\n-------------------------- EXAMPLE 8 --------------------------\nPS C:\\\u003eGet-DbaLogin -SqlInstance sql2016 -Type SQL\nGet all user objects from server sql2016 that are SQL Logins\n-------------------------- EXAMPLE 9 --------------------------\nPS C:\\\u003eGet-DbaLogin -SqlInstance sql2016 -Type SQL -IncludeFilter *Rob*\nGet all user objects from server sql2016 that are SQL Logins and have Rob in the name\n-------------------------- EXAMPLE 10 --------------------------\nPS C:\\\u003eGet-DbaLogin -SqlInstance sql2016 -ExcludeSystemLogin\nGet all user objects from server sql2016 that are not system objects\n-------------------------- EXAMPLE 11 --------------------------\nPS C:\\\u003eGet-DbaLogin -SqlInstance sql2016 -ExcludeFilter \u0027##*\u0027,\u0027NT *\u0027\nGet all user objects from server sql2016 except any beginning with \u0027##\u0027 or \u0027NT \u0027, returned as SMO login objects.\n-------------------------- EXAMPLE 12 --------------------------\nPS C:\\\u003e\u0027sql2016\u0027, \u0027sql2014\u0027 | Get-DbaLogin -SqlCredential $sqlcred\nUsing Get-DbaLogin on the pipeline, you can also specify which names you would like with -Login.\n-------------------------- EXAMPLE 13 --------------------------\nPS C:\\\u003e\u0027sql2016\u0027, \u0027sql2014\u0027 | Get-DbaLogin -SqlCredential $sqlcred -Locked\nUsing Get-DbaLogin on the pipeline to get all locked logins on servers sql2016 and sql2014.\n-------------------------- EXAMPLE 14 --------------------------\nPS C:\\\u003e\u0027sql2016\u0027, \u0027sql2014\u0027 | Get-DbaLogin -SqlCredential $sqlcred -HasAccess -Disabled\nUsing Get-DbaLogin on the pipeline to get all Disabled logins that have access on servers sql2016 or sql2014.",
        "Syntax":  "Get-DbaLogin [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Login \u003cObject[]\u003e] [-IncludeFilter \u003cObject[]\u003e] [-ExcludeLogin \u003cObject[]\u003e] [-ExcludeFilter \u003cObject[]\u003e] [-ExcludeSystemLogin] [-Type \u003cString\u003e] [-HasAccess] [-SqlLogins] [-WindowsLogins] [-Locked] [-Disabled] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaMaintenanceSolutionLog",
        "Description":  "Ola wrote a .sql script to get the content from the commandLog table. However, if LogToTable=\u0027N\u0027, there will be no logging in that table. This function reads the text files that are written in the SQL Instance\u0027s Log directory.",
        "Tags":  [
                     "Ola",
                     "Maintenance"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "LogType",
                           "Accepts \u0027IndexOptimize\u0027, \u0027DatabaseBackup\u0027, \u0027DatabaseIntegrityCheck\u0027. ATM only IndexOptimize parsing is available",
                           "",
                           false,
                           "false",
                           "IndexOptimize"
                       ],
                       [
                           "Since",
                           "Consider only files generated since this date",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Path",
                           "Where to search for log files. By default it\u0027s the SQL instance errorlogpath path",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Klaas Vandenberghe (@powerdbaklaas) | Simone Bizzotto ( @niphlod )",
        "Synopsis":  "Reads the log files generated by the IndexOptimize Agent Job from Ola Hallengren\u0027s MaintenanceSolution.",
        "Name":  "Get-DbaMaintenanceSolutionLog",
        "Links":  "https://dbatools.io/Get-DbaMaintenanceSolutionLog",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaMaintenanceSolutionLog -SqlInstance sqlserver2014a\nGets the outcome of the IndexOptimize job on sql instance sqlserver2014a.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaMaintenanceSolutionLog -SqlInstance sqlserver2014a -SqlCredential $credential\nGets the outcome of the IndexOptimize job on sqlserver2014a, using SQL Authentication.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003e\u0027sqlserver2014a\u0027, \u0027sqlserver2020test\u0027 | Get-DbaMaintenanceSolutionLog\nGets the outcome of the IndexOptimize job on sqlserver2014a and sqlserver2020test.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaMaintenanceSolutionLog -SqlInstance sqlserver2014a -Path \u0027D:\\logs\\maintenancesolution\\\u0027\nGets the outcome of the IndexOptimize job on sqlserver2014a, reading the log files in their custom location.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eGet-DbaMaintenanceSolutionLog -SqlInstance sqlserver2014a -Since \u00272017-07-18\u0027\nGets the outcome of the IndexOptimize job on sqlserver2014a, starting from july 18, 2017.\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eGet-DbaMaintenanceSolutionLog -SqlInstance sqlserver2014a -LogType IndexOptimize\nGets the outcome of the IndexOptimize job on sqlserver2014a, the other options are not yet available! sorry",
        "Syntax":  "Get-DbaMaintenanceSolutionLog [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-LogType] \u003cString[]\u003e] [[-Since] \u003cDateTime\u003e] [[-Path] \u003cString\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaManagementObject",
        "Description":  "The Get-DbaManagementObject returns an object with the Version and the\nAdd-Type Load Template for each version on the server.",
        "Tags":  "SMO",
        "Params":  [
                       [
                           "ComputerName",
                           "The name of the Windows Server(s) you would like to check.",
                           "ServerInstance,SqlServer,SqlInstance",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "This command uses Windows credentials. This parameter allows you to connect remotely as a different user.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "VersionNumber",
                           "This is the specific version number you are looking for. The function will look\r\nfor that version only.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Get-DbaSqlManagementObject",
        "Author":  "Ben Miller (@DBAduck), http://dbaduck.com",
        "Synopsis":  "Gets SQL Mangaement Object versions installed on the machine.",
        "Name":  "Get-DbaManagementObject",
        "Links":  "https://dbatools.io/Get-DbaManagementObject",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaManagementObject\nReturns all versions of SMO on the computer\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaManagementObject -VersionNumber 13\nReturns just the version specified. If the version does not exist then it will return nothing.",
        "Syntax":  "Get-DbaManagementObject [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [[-VersionNumber] \u003cInt32\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaMaxMemory",
        "Description":  "This command retrieves the SQL Server \u0027Max Server Memory\u0027 configuration setting as well as the total physical installed on the server.\n\nResults are turned in megabytes (MB).",
        "Tags":  [
                     "MaxMemory",
                     "Memory"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Get-SqlMaxMemory",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Gets the \u0027Max Server Memory\u0027 configuration setting and the memory of the server.  Works on SQL Server 2000-2014.",
        "Name":  "Get-DbaMaxMemory",
        "Links":  "https://dbatools.io/Get-DbaMaxMemory",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaMaxMemory -SqlInstance sqlcluster, sqlserver2012\nGet memory settings for instances \"sqlcluster\" and \"sqlserver2012\". Returns results in megabytes (MB).\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaCmsRegServer -SqlInstance sqlcluster | Get-DbaMaxMemory | Where-Object { $_.MaxValue -gt $_.Total }\nFind all servers in Server Central Management Server that have \u0027Max Server Memory\u0027 set to higher than the total memory of the server (think 2147483647)\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eFind-DbaInstance -ComputerName localhost | Get-DbaMaxMemory | Format-Table -AutoSize\nScans localhost for instances using the browser service, traverses all instances and displays memory settings in a formatted table.",
        "Syntax":  "Get-DbaMaxMemory [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaMemoryCondition",
        "Description":  "The information from SQL Server ring buffers can be used to determine the memory conditions on the server when paging occurs.\n\nThis command is based on a query provided by Microsoft support.\nReference KB article: https://support.microsoft.com/en-us/help/918483/how-to-reduce-paging-of-buffer-pool-memory-in-the-64-bit-version-of-sq",
        "Tags":  "Memory",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer,SqlServers",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential).",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "IJeb Reitsma",
        "Synopsis":  "Determine the memory conditions from SQL Server ring buffers.",
        "Name":  "Get-DbaMemoryCondition",
        "Links":  "https://dbatools.io/Get-DbaMemoryCondition",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaMemoryCondition -SqlInstance sqlserver2014a\nReturns the memory conditions for the selected instance\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaCmsRegServer -SqlInstance sqlserver2014a -Group GroupName | Get-DbaMemoryCondition | Out-GridView\nReturns the memory conditions for a group of servers from SQL Server Central Management Server (CMS). Send output to GridView.",
        "Syntax":  "Get-DbaMemoryCondition [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaMemoryUsage",
        "Description":  "Retrieves the amount of memory per performance counter. Default output includes columns Server, counter instance, counter, number of pages, memory in KB, memory in MB\nSSAS and SSIS are included.\n\nSSRS does not have memory counters, only memory shrinks and memory pressure state.\n\nThis function requires local admin role on the targeted computers.",
        "Tags":  "Memory",
        "Params":  [
                       [
                           "ComputerName",
                           "The Windows Server that you are connecting to. Note that this will return all instances, but Out-GridView makes it easy to filter to specific instances.",
                           "Host,cn,Server",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Credential object used to connect to the SQL Server as a different user",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Klaas Vandenberghe (@PowerDBAKlaas)",
        "Synopsis":  "Get amount of memory in use by *all* SQL Server components and instances",
        "Name":  "Get-DbaMemoryUsage",
        "Links":  "https://dbatools.io/Get-DbaMemoryUsage",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaMemoryUsage -ComputerName sql2017\nReturns a custom object displaying Server, counter instance, counter, number of pages, memory\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaMemoryUsage -ComputerName sql2017\\sqlexpress -SqlCredential sqladmin | Where-Object { $_.Memory.Megabyte -gt 100 }\nLogs into the sql2017\\sqlexpress as sqladmin using SQL Authentication then returns results only where memory exceeds 100 MB\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003e$servers | Get-DbaMemoryUsage | Out-Gridview\nGets results from an array of $servers then diplays them in a gridview.",
        "Syntax":  "Get-DbaMemoryUsage [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaModule",
        "Description":  "Quickly find modules (Stored Procs, Functions, Views, Constraints, Rules, Triggers, etc) that have been modified in a database, or across all databases.\nResults will exclude the module definition, but can be queried explicitly.",
        "Tags":  [
                     "StoredProcedure",
                     "Trigger"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ModifiedSince",
                           "DateTime value to use as minimum modified date of module.",
                           "",
                           false,
                           "false",
                           "1900-01-01"
                       ],
                       [
                           "Type",
                           "Limit by specific type of module. Valid choices include: View, TableValuedFunction, DefaultConstraint, StoredProcedure, Rule, InlineTableValuedFunction, Trigger, ScalarFunction",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeSystemDatabases",
                           "Allows you to suppress output on system databases",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "ExcludeSystemObjects",
                           "Allows you to suppress output on system objects",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Get-DbaSqlModule",
        "Author":  "Brandon Abshire, netnerds.net",
        "Synopsis":  "Displays all objects in sys.sys_modules after specified modification date.  Works on SQL Server 2008 and above.",
        "Name":  "Get-DbaModule",
        "Links":  "https://dbatools.io/Get-DbaModule",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaModule -SqlInstance sql2008, sqlserver2012\nReturn all modules for servers sql2008 and sqlserver2012 sorted by Database, Modify_Date ASC.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaModule -SqlInstance sql2008, sqlserver2012 | Select *\nShows hidden definition column (informative wall of text).\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaModule -SqlInstance sql2008 -Database TestDB -ModifiedSince \"2017-01-01 10:00:00\"\nReturn all modules on server sql2008 for only the TestDB database with a modified date after 1 January 2017 10:00:00 AM.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaModule -SqlInstance sql2008 -Type View, Trigger, ScalarFunction\nReturn all modules on server sql2008 for all databases that are triggers, views or scalar functions.",
        "Syntax":  "Get-DbaModule [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [[-ModifiedSince] \u003cDateTime\u003e] [[-Type] \u003cString[]\u003e] [-ExcludeSystemDatabases] [-ExcludeSystemObjects] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaMsdtc",
        "Description":  "Returns a custom object with Computer name, state of the MSDTC Service, security settings of MSDTC and CID\u0027s\n\nRequires: Windows administrator access on Servers",
        "Tags":  [
                     "Msdtc",
                     "dtc"
                 ],
        "Params":  [
                       [
                           "ComputerName",
                           "The target computer.",
                           "cn,host,Server",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Klaas Vandenberghe (@powerdbaklaas)",
        "Synopsis":  "Displays information about the Distributed Transaction Coordinator (MSDTC) on a server",
        "Name":  "Get-DbaMsdtc",
        "Links":  "https://dbatools.io/Get-DbaMsdtc",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaMsdtc -ComputerName srv0042\nGet DTC status for the server srv0042\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e$Computers = (Get-Content D:\\configfiles\\SQL\\MySQLInstances.txt | % {$_.split(\u0027\\\u0027)[0]})\nPS C:\\\u003e $Computers | Get-DbaMsdtc\nGet DTC status for all the computers in a .txt file\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaMsdtc -Computername $Computers | where { $_.dtcservicestate -ne \u0027running\u0027 }\nGet DTC status for all the computers where the MSDTC Service is not running\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaMsdtc -ComputerName srv0042 | Out-Gridview\nGet DTC status for the computer srv0042 and show in a grid view",
        "Syntax":  "Get-DbaMsdtc [[-ComputerName] \u003cString[]\u003e] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaNetworkActivity",
        "Description":  "Gets the Current traffic on every Network Interface on a computer.\nSee https://msdn.microsoft.com/en-us/library/aa394293(v=vs.85).aspx\n\nRequires Local Admin rights on destination computer(s).",
        "Tags":  "Network",
        "Params":  [
                       [
                           "ComputerName",
                           "The target SQL Server instance or instances.",
                           "cn,host,Server",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Credential object used to connect to the computer as a different user.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Klaas Vandenberghe (@PowerDBAKlaas)",
        "Synopsis":  "Gets the Current traffic on every Network Interface on a computer.",
        "Name":  "Get-DbaNetworkActivity",
        "Links":  "https://dbatools.io/Get-DbaNetworkActivity",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaNetworkActivity -ComputerName sqlserver2014a\nGets the Current traffic on every Network Interface on computer sqlserver2014a.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e\u0027sql1\u0027,\u0027sql2\u0027,\u0027sql3\u0027 | Get-DbaNetworkActivity\nGets the Current traffic on every Network Interface on computers sql1, sql2 and sql3.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaNetworkActivity -ComputerName sql1,sql2 | Out-Gridview\nGets the Current traffic on every Network Interface on computers sql1 and sql2, and shows them in a grid view.",
        "Syntax":  "Get-DbaNetworkActivity [[-ComputerName] \u003cString[]\u003e] [[-Credential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaNetworkCertificate",
        "Description":  "Gets computer certificates on localhost that are candidates for using with SQL Server\u0027s network encryption",
        "Tags":  "Certificate",
        "Params":  [
                       [
                           "ComputerName",
                           "The target SQL Server instance or instances. Defaults to localhost. If target is a cluster, you must specify the distinct nodes.",
                           "ServerInstance,SqlServer,SqlInstance",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Allows you to login to $ComputerName using alternative credentials.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Simplifies finding computer certificates that are candidates for using with SQL Server\u0027s network encryption",
        "Name":  "Get-DbaNetworkCertificate",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaNetworkCertificate\nGets computer certificates on localhost that are candidates for using with SQL Server\u0027s network encryption\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaNetworkCertificate -ComputerName sql2016\nGets computer certificates on sql2016 that are being used for SQL Server network encryption",
        "Syntax":  "Get-DbaNetworkCertificate [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaOpenTransaction",
        "Description":  "This command is based on open transaction script published by Paul Randal.\nReference: https://www.sqlskills.com/blogs/paul/script-open-transactions-with-text-and-plans/",
        "Tags":  [
                     "Database",
                     "Process",
                     "Session",
                     "ActivityMonitor"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The SQL Server instance",
                           "ServerInstance,SqlServer,SqlServers",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Connect using alternative credentials",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Displays all open transactions.",
        "Name":  "Get-DbaOpenTransaction",
        "Links":  "https://dbatools.io/Get-DbaOpenTransaction",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaOpenTransaction -SqlInstance sqlserver2014a\nReturns open transactions for sqlserver2014a\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaOpenTransaction -SqlInstance sqlserver2014a -SqlCredential sqladmin\nLogs into sqlserver2014a using the login \"sqladmin\"",
        "Syntax":  "Get-DbaOpenTransaction [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaOperatingSystem",
        "Description":  "Gets operating system information from the server and returns as an object.",
        "Tags":  [
                     "ServerInfo",
                     "OperatingSystem"
                 ],
        "Params":  [
                       [
                           "ComputerName",
                           "Target computer(s). If no computer name is specified, the local computer is targeted",
                           "cn,host,Server",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Alternate credential object to use for accessing the target computer(s).",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Shawn Melton (@wsmelton), https://wsmelton.github.io",
        "Synopsis":  "Gets operating system information from the server.",
        "Name":  "Get-DbaOperatingSystem",
        "Links":  "https://dbatools.io/Get-DbaOperatingSystem",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaOperatingSystem\nReturns information about the local computer\u0027s operating system\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaOperatingSystem -ComputerName sql2016\nReturns information about the sql2016\u0027s operating system\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003e$wincred = Get-Credential ad\\sqladmin\nPS C:\\\u003e \u0027sql2016\u0027, \u0027sql2017\u0027 | Get-DbaOperatingSystem -Credential $wincred\nReturns information about the sql2016 and sql2017 operating systems using alternative Windows credentials\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-Content .\\servers.txt | Get-DbaOperatingSystem\nReturns information about all the servers operating system that are stored in the file. Every line in the file can only contain one hostname for a server.",
        "Syntax":  "Get-DbaOperatingSystem [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaOrphanUser",
        "Description":  "An orphan user is defined by a user that does not have their matching login. (Login property = \"\").",
        "Tags":  [
                     "Orphan",
                     "Database",
                     "User",
                     "Security",
                     "Login"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Specifies the database(s) to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "Specifies the database(s) to exclude from processing. Options for this list are auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Claudio Silva (@ClaudioESSilva) | Garry Bargsley (@gbargsley) | Simone Bizzotto (@niphlod)",
        "Synopsis":  "Get orphaned users.",
        "Name":  "Get-DbaOrphanUser",
        "Links":  "https://dbatools.io/Get-DbaOrphanUser",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaOrphanUser -SqlInstance localhost\\sql2016\nFinds all orphan users without matching Logins in all databases present on server \u0027localhost\\sql2016\u0027.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaOrphanUser -SqlInstance localhost\\sql2016 -SqlCredential $cred\nFinds all orphan users without matching Logins in all databases present on server \u0027localhost\\sql2016\u0027. SQL Server authentication will be used in connecting to the server.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaOrphanUser -SqlInstance localhost\\sql2016 -Database db1\nFinds orphan users without matching Logins in the db1 database present on server \u0027localhost\\sql2016\u0027.",
        "Syntax":  "Get-DbaOrphanUser [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaPageFileSetting",
        "Description":  "This command uses CIM (or other, related computer management tools) to detect the page file configuration of the target computer(s).\n\nNote that this may require local administrator privileges for the relevant computers.",
        "Tags":  "CIM",
        "Params":  [
                       [
                           "ComputerName",
                           "The target SQL Server instance or instances.\r\nThis can be the name of a computer, a SMO object, an IP address, an AD Computer object, a connection string or a SQL Instance.",
                           "cn,host,ServerInstance,Server,SqlServer",
                           false,
                           "true (ByValue, ByPropertyName)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Credential object used to connect to the Computer as a different user",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Klaas Vandenberghe (@PowerDBAKlaas)",
        "Synopsis":  "Returns information on the page file configuration of the target computer.",
        "Name":  "Get-DbaPageFileSetting",
        "Links":  "https://dbatools.io/Get-DbaPageFileSetting",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaPageFileSetting -ComputerName ServerA,ServerB\nReturns a custom object displaying ComputerName, AutoPageFile, FileName, Status, LastModified, LastAccessed, AllocatedBaseSize, InitialSize, MaximumSize, PeakUsage, CurrentUsage  for ServerA and \r\nServerB\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e\u0027ServerA\u0027 | Get-DbaPageFileSetting\nReturns a custom object displaying ComputerName, AutoPageFile, FileName, Status, LastModified, LastAccessed, AllocatedBaseSize, InitialSize, MaximumSize, PeakUsage, CurrentUsage  for ServerA",
        "Syntax":  "Get-DbaPageFileSetting [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [-Credential \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaPbmCategory",
        "Description":  "Returns policy categories from policy based management from an instance.",
        "Tags":  [
                     "Policy",
                     "PolicyBasedManagement",
                     "PBM"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.",
                           "ServerInstance,SqlServer",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Category",
                           "Filters results to only show specific condition",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Allows piping from Get-DbaPbmStore",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "ExcludeSystemObject",
                           "By default system objects are include. Use this parameter to exclude them.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Returns policy categories from policy based management from an instance.",
        "Name":  "Get-DbaPbmCategory",
        "Links":  "https://dbatools.io/Get-DbaPbmCategory",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaPbmCategory -SqlInstance sql2016\nReturns all policy categories from the sql2016 PBM server\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaPbmCategory -SqlInstance sql2016 -SqlCredential $cred\nUses a credential $cred to connect and return all policy categories from the sql2016 PBM server",
        "Syntax":  "Get-DbaPbmCategory [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Category] \u003cString[]\u003e] [[-InputObject] \u003cPolicyStore[]\u003e] [-ExcludeSystemObject] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaPbmCategorySubscription",
        "Description":  "Returns policy category subscriptions from policy based management from an instance.",
        "Tags":  [
                     "Policy",
                     "PolicyBasedManagement",
                     "PBM"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.",
                           "ServerInstance,SqlServer",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Allows piping from Get-DbaPbmStore",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Returns policy category subscriptions from policy based management from an instance.",
        "Name":  "Get-DbaPbmCategorySubscription",
        "Links":  "https://dbatools.io/Get-DbaPbmCategorySubscription",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaPbmCategorySubscription -SqlInstance sql2016\nReturns all policy category subscriptions from the sql2016 PBM server\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaPbmCategorySubscription -SqlInstance sql2016 -SqlCredential $cred\nUses a credential $cred to connect and return all policy category subscriptions from the sql2016 PBM server",
        "Syntax":  "Get-DbaPbmCategorySubscription [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-InputObject] \u003cPolicyStore[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaPbmCondition",
        "Description":  "Returns conditions from policy based management from an instance.",
        "Tags":  [
                     "Policy",
                     "PolicyBasedManagement",
                     "PBM"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.",
                           "ServerInstance,SqlServer",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Condition",
                           "Filters results to only show specific condition",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Allows piping from Get-DbaPbmStore",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "IncludeSystemObject",
                           "By default system objects are filtered out. Use this parameter to include them.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Returns conditions from policy based management from an instance.",
        "Name":  "Get-DbaPbmCondition",
        "Links":  "https://dbatools.io/Get-DbaPbmCondition",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaPbmCondition -SqlInstance sql2016\nReturns all conditions from the sql2016 PBM server\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaPbmCondition -SqlInstance sql2016 -SqlCredential $cred\nUses a credential $cred to connect and return all conditions from the sql2016 PBM server",
        "Syntax":  "Get-DbaPbmCondition [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Condition] \u003cString[]\u003e] [[-InputObject] \u003cPolicyStore[]\u003e] [-IncludeSystemObject] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaPbmObjectSet",
        "Description":  "Returns object sets from policy based management.",
        "Tags":  [
                     "Policy",
                     "PolicyBasedManagement",
                     "PBM"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.",
                           "ServerInstance,SqlServer",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ObjectSet",
                           "Filters results to only show specific object set",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Allows piping from Get-DbaPbmStore",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "IncludeSystemObject",
                           "By default system objects are filtered out. Use this parameter to include them.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Returns object sets from policy based management.",
        "Name":  "Get-DbaPbmObjectSet",
        "Links":  "https://dbatools.io/Get-DbaPbmObjectSet",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaPbmObjectSet -SqlInstance sql2016\nReturns all object sets from the sql2016 PBM instance\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaPbmObjectSet -SqlInstance sql2016 -SqlCredential $cred\nUses a credential $cred to connect and return all object sets from the sql2016 PBM instance",
        "Syntax":  "Get-DbaPbmObjectSet [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-ObjectSet] \u003cString[]\u003e] [[-InputObject] \u003cPolicyStore[]\u003e] [-IncludeSystemObject] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaPbmPolicy",
        "Description":  "Returns details of policies with the option to filter on Category and SystemObjects.",
        "Tags":  [
                     "Policy",
                     "PolicyBasedManagement",
                     "PBM"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.",
                           "ServerInstance,SqlServer",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Policy",
                           "Filters results to only show specific policy",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Category",
                           "Filters results to only show policies in the category selected",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Allows piping from Get-DbaPbmStore",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "IncludeSystemObject",
                           "By default system objects are filtered out. Use this parameter to INCLUDE them .",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Get-DbaPolicy",
        "Author":  "Stephen Bennett, https://sqlnotesfromtheunderground.wordpress.com/",
        "Synopsis":  "Returns policies from Policy-Based Management from an instance.",
        "Name":  "Get-DbaPbmPolicy",
        "Links":  "https://dbatools.io/Get-DbaPbmPolicy",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaPbmPolicy -SqlInstance sql2016\nReturns all policies from sql2016 server\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaPbmPolicy -SqlInstance sql2016 -SqlCredential $cred\nUses a credential $cred to connect and return all policies from sql2016 instance\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaPbmPolicy -SqlInstance sql2016 -Category MorningCheck\nReturns all policies from sql2016 server that part of the PolicyCategory MorningCheck",
        "Syntax":  "Get-DbaPbmPolicy [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Policy] \u003cString[]\u003e] [[-Category] \u003cString[]\u003e] [[-InputObject] \u003cPolicyStore[]\u003e] [-IncludeSystemObject] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaPbmStore",
        "Description":  "Returns the policy based management store.",
        "Tags":  [
                     "Policy",
                     "PolicyBasedManagement",
                     "PBM"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Returns the policy based management store.",
        "Name":  "Get-DbaPbmStore",
        "Links":  "https://dbatools.io/Get-DbaPbmStore",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaPbmStore -SqlInstance sql2016\nReturn the policy store from the sql2016 instance\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaPbmStore -SqlInstance sql2016 -SqlCredential $cred\nUses a credential $cred to connect and return the policy store from the sql2016 instance",
        "Syntax":  "Get-DbaPbmStore [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaPermission",
        "Description":  "Retrieves a list of permissions\n\nPermissions link principals to securables.\nPrincipals exist on Windows, Instance and Database level.\nSecurables exist on Instance and Database level.\nA permission state can be GRANT, DENY or REVOKE.\nThe permission type can be SELECT, CONNECT, EXECUTE and more.\n\nSee https://msdn.microsoft.com/en-us/library/ms191291.aspx for more information",
        "Tags":  [
                     "Permissions",
                     "Databases"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. Defaults to localhost.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Specifies one or more database(s) to process. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "Specifies one or more database(s) to exclude from processing.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "IncludeServerLevel",
                           "If this switch is enabled, information about Server Level Permissions will be output.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "ExcludeSystemObjects",
                           "If this switch is enabled, permissions on system securables will be excluded.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "If this switch is enabled exceptions will be thrown to the caller, which will need to perform its own exception processing. Otherwise, the function will try to catch the exception, interpret it and \r\nprovide a friendly error message.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Klaas Vandenberghe (@PowerDBAKlaas)",
        "Synopsis":  "Get a list of Server and Database level permissions",
        "Name":  "Get-DbaPermission",
        "Links":  "https://dbatools.io/Get-DbaPermission",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaPermission -SqlInstance ServerA\\sql987\nReturns a custom object with Server name, Database name, permission state, permission type, grantee and securable.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaPermission -SqlInstance ServerA\\sql987 | Format-Table -AutoSize\nReturns a formatted table displaying Server, Database, permission state, permission type, grantee, granteetype, securable and securabletype.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaPermission -SqlInstance ServerA\\sql987 -ExcludeSystemObjects -IncludeServerLevel\nReturns a custom object with Server name, Database name, permission state, permission type, grantee and securable\r\nin all databases and on the server level, but not on system securables.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaPermission -SqlInstance sql2016 -Database master\nReturns a custom object with permissions for the master database.",
        "Syntax":  "Get-DbaPermission [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [-IncludeServerLevel] [-ExcludeSystemObjects] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaPfAvailableCounter",
        "Description":  "Gathers list of all available counters on local or remote machines. Note, if you pass a credential object, it will be included in the output for easy reuse in your next piped command.\n\nThanks to Daniel Streefkerk for this super fast way of counters\nhttps://daniel.streefkerkonline.com/2016/02/18/use-powershell-to-list-all-windows-performance-counters-and-their-numeric-ids",
        "Tags":  [
                     "Performance",
                     "DataCollector",
                     "PerfCounter"
                 ],
        "Params":  [
                       [
                           "ComputerName",
                           "The target computer. Defaults to localhost.",
                           "",
                           false,
                           "false",
                           "$env:ComputerName"
                       ],
                       [
                           "Credential",
                           "Allows you to login to servers using alternative credentials. To use:\n$scred = Get-Credential, then pass $scred object to the -Credential parameter.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Pattern",
                           "Specify a pattern for filtering.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Gathers list of all available counters on local or remote machines.",
        "Name":  "Get-DbaPfAvailableCounter",
        "Links":  "https://dbatools.io/Get-DbaPfAvailableCounter",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaPfAvailableCounter\nGets all available counters on the local machine.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaPfAvailableCounter -Pattern *sql*\nGets all counters matching sql on the local machine.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaPfAvailableCounter -ComputerName sql2017 -Pattern *sql*\nGets all counters matching sql on the remote server sql2017.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaPfAvailableCounter -Pattern *sql*\nGets all counters matching sql on the local machine.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eGet-DbaPfAvailableCounter -Pattern *sql* | Add-DbaPfDataCollectorCounter -CollectorSet \u0027Test Collector Set\u0027 -Collector DataCollector01\nAdds all counters matching \"sql\" to the DataCollector01 within the \u0027Test Collector Set\u0027 CollectorSet.",
        "Syntax":  "Get-DbaPfAvailableCounter [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [[-Pattern] \u003cString\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaPfDataCollector",
        "Description":  "Gets Performance Monitor Data Collectors.",
        "Tags":  [
                     "Performance",
                     "DataCollector",
                     "PerfCounter"
                 ],
        "Params":  [
                       [
                           "ComputerName",
                           "The target computer. Defaults to localhost.",
                           "",
                           false,
                           "false",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Allows you to login to servers using alternative credentials. To use:\n$scred = Get-Credential, then pass $scred object to the -Credential parameter.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "CollectorSet",
                           "The Collector Set name.",
                           "DataCollectorSet",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Collector",
                           "The Collector name.",
                           "DataCollector",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Accepts the object output by Get-DbaPfDataCollectorSet via the pipeline.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Gets Performance Monitor Data Collectors.",
        "Name":  "Get-DbaPfDataCollector",
        "Links":  "https://dbatools.io/Get-DbaPfDataCollector",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaPfDataCollector\nGets all Collectors on localhost.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaPfDataCollector -ComputerName sql2017\nGets all Collectors on sql2017.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaPfDataCollector -ComputerName sql2017, sql2016 -Credential ad\\sqldba -CollectorSet \u0027System Correlation\u0027\nGets all Collectors for the \u0027System Correlation\u0027 CollectorSet on sql2017 and sql2016 using alternative credentials.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaPfDataCollectorSet -CollectorSet \u0027System Correlation\u0027 | Get-DbaPfDataCollector\nGets all Collectors for the \u0027System Correlation\u0027 CollectorSet.",
        "Syntax":  "Get-DbaPfDataCollector [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [[-CollectorSet] \u003cString[]\u003e] [[-Collector] \u003cString[]\u003e] [[-InputObject] \u003cObject[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaPfDataCollectorCounter",
        "Description":  "Gets Performance Counters.",
        "Tags":  [
                     "Performance",
                     "DataCollector",
                     "PerfCounter"
                 ],
        "Params":  [
                       [
                           "ComputerName",
                           "The target computer. Defaults to localhost.",
                           "",
                           false,
                           "false",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Allows you to login to servers using alternative credentials. To use:\n$scred = Get-Credential, then pass $scred object to the -Credential parameter.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "CollectorSet",
                           "The Collector Set name.",
                           "DataCollectorSet",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Collector",
                           "The Collector name.",
                           "DataCollector",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Counter",
                           "The Counter name to capture. This must be in the form of \u0027\\Processor(_Total)\\% Processor Time\u0027.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Accepts the object output by Get-DbaPfDataCollectorSet via the pipeline.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Gets Performance Counters.",
        "Name":  "Get-DbaPfDataCollectorCounter",
        "Links":  "https://dbatools.io/Get-DbaPfDataCollectorCounter",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaPfDataCollectorCounter\nGets all counters for all Collector Sets on localhost.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaPfDataCollectorCounter -ComputerName sql2017\nGets all counters for all Collector Sets on  on sql2017.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaPfDataCollectorCounter -ComputerName sql2017 -Counter \u0027\\Processor(_Total)\\% Processor Time\u0027\nGets the \u0027\\Processor(_Total)\\% Processor Time\u0027 counter on sql2017.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaPfDataCollectorCounter -ComputerName sql2017, sql2016 -Credential ad\\sqldba -CollectorSet \u0027System Correlation\u0027\nGets all counters for the \u0027System Correlation\u0027 CollectorSet on sql2017 and sql2016 using alternative credentials.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eGet-DbaPfDataCollectorSet -CollectorSet \u0027System Correlation\u0027 | Get-DbaPfDataCollector | Get-DbaPfDataCollectorCounter\nGets all counters for the \u0027System Correlation\u0027 CollectorSet.",
        "Syntax":  "Get-DbaPfDataCollectorCounter [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [[-CollectorSet] \u003cString[]\u003e] [[-Collector] \u003cString[]\u003e] [[-Counter] \u003cString[]\u003e] [[-InputObject] \u003cObject[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaPfDataCollectorCounterSample",
        "Description":  "Gets Performance Counter Samples.",
        "Tags":  [
                     "Performance",
                     "DataCollector",
                     "PerfCounter"
                 ],
        "Params":  [
                       [
                           "ComputerName",
                           "The target computer. Defaults to localhost.",
                           "",
                           false,
                           "false",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Allows you to login to servers using alternative credentials. To use:\n$scred = Get-Credential, then pass $scred object to the -Credential parameter.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "CollectorSet",
                           "The Collector Set name.",
                           "DataCollectorSet",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Collector",
                           "The Collector name.",
                           "DataCollector",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Counter",
                           "The Counter name. This must be in the form of \u0027\\Processor(_Total)\\% Processor Time\u0027.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Continuous",
                           "If this switch is enabled, samples will be retrieved continuously until you press CTRL+C. By default, this command gets only one counter sample. You can use the SampleInterval parameter to set the \r\ninterval for continuous sampling.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "ListSet",
                           "Gets the specified performance counter sets on the computers. Enter the names of the counter sets. Wildcards are permitted.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "MaxSamples",
                           "Specifies the number of samples to get from each counter. The default is 1 sample. To get samples continuously (no maximum sample size), use the Continuous parameter.\nTo collect a very large data set, consider running a Get-DbaPfDataCollectorCounterSample command as a Windows PowerShell background job.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "SampleInterval",
                           "Specifies the time between samples in seconds. The minimum value and the default value are 1 second.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "InputObject",
                           "Accepts the object output by Get-DbaPfDataCollectorCounter via the pipeline.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Gets Performance Counter Samples.",
        "Name":  "Get-DbaPfDataCollectorCounterSample",
        "Links":  "https://dbatools.io/Get-DbaPfDataCollectorCounterSample",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaPfDataCollectorCounterSample\nGets a single sample for all counters for all Collector Sets on localhost.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaPfDataCollectorCounterSample -Counter \u0027\\Processor(_Total)\\% Processor Time\u0027\nGets a single sample for all counters for all Collector Sets on localhost.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaPfDataCollectorCounter -ComputerName sql2017, sql2016 | Out-GridView -PassThru | Get-DbaPfDataCollectorCounterSample -MaxSamples 10\nGets 10 samples for all counters for all Collector Sets for servers sql2016 and sql2017.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaPfDataCollectorCounterSample -ComputerName sql2017\nGets a single sample for all counters for all Collector Sets on sql2017.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eGet-DbaPfDataCollectorCounterSample -ComputerName sql2017, sql2016 -Credential ad\\sqldba -CollectorSet \u0027System Correlation\u0027\nGets a single sample for all counters for the \u0027System Correlation\u0027 CollectorSet on sql2017 and sql2016 using alternative credentials.\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eGet-DbaPfDataCollectorCounterSample -CollectorSet \u0027System Correlation\u0027\nGets a single sample for all counters for the \u0027System Correlation\u0027 CollectorSet.",
        "Syntax":  "Get-DbaPfDataCollectorCounterSample [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [[-CollectorSet] \u003cString[]\u003e] [[-Collector] \u003cString[]\u003e] [[-Counter] \u003cString[]\u003e] [-Continuous] [[-ListSet]] [[-MaxSamples] \u003cInt32\u003e] [[-SampleInterval] \u003cInt32\u003e] [[-InputObject] \u003cObject[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaPfDataCollectorSet",
        "Description":  "Gets Performance Monitor Data Collector Set.",
        "Tags":  [
                     "Performance",
                     "DataCollector",
                     "PerfCounter"
                 ],
        "Params":  [
                       [
                           "ComputerName",
                           "The target computer. Defaults to localhost.",
                           "",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Allows you to login to servers using alternative credentials. To use:\n$scred = Get-Credential, then pass $scred object to the -Credential parameter.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "CollectorSet",
                           "The Collector set name.",
                           "DataCollectorSet",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Gets Performance Monitor Data Collector Set.",
        "Name":  "Get-DbaPfDataCollectorSet",
        "Links":  "https://dbatools.io/Get-DbaPfDataCollectorSet",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaPfDataCollectorSet\nGets all Collector Sets on localhost.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaPfDataCollectorSet -ComputerName sql2017\nGets all Collector Sets on sql2017.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaPfDataCollectorSet -ComputerName sql2017 -Credential ad\\sqldba -CollectorSet \u0027System Correlation\u0027\nGets the \u0027System Correlation\u0027 CollectorSet on sql2017 using alternative credentials.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaPfDataCollectorSet | Select-Object *\nDisplays extra columns and also exposes the original COM object in DataCollectorSetObject.",
        "Syntax":  "Get-DbaPfDataCollectorSet [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [[-CollectorSet] \u003cString[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaPfDataCollectorSetTemplate",
        "Description":  "Parses Perf Monitor XML templates. Defaults to parsing templates in the dbatools template repository (\\bin\\perfmontemplates\\).",
        "Tags":  [
                     "Performance",
                     "DataCollector",
                     "PerfCounter"
                 ],
        "Params":  [
                       [
                           "Path",
                           "The path to the template directory. Defaults to the dbatools template repository (\\bin\\perfmontemplates\\).",
                           "",
                           false,
                           "false",
                           "\"$script:PSModuleRoot\\bin\\perfmontemplates\\collectorsets\""
                       ],
                       [
                           "Pattern",
                           "Specify a pattern for filtering. Alternatively, you can use Out-GridView -Passthru to select objects and pipe them to Import-DbaPfDataCollectorSetTemplate.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Template",
                           "Specifies one or more of the templates provided by dbatools. Press tab to cycle through the list to the options.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Parses Perf Monitor templates. Defaults to parsing templates in the dbatools template repository (\\bin\\perfmontemplates\\).",
        "Name":  "Get-DbaPfDataCollectorSetTemplate",
        "Links":  "https://dbatools.io/Get-DbaPfDataCollectorSetTemplate",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaPfDataCollectorSetTemplate\nReturns information about all the templates in the local dbatools repository.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaPfDataCollectorSetTemplate | Out-GridView -PassThru | Import-DbaPfDataCollectorSetTemplate -ComputerName sql2017 | Start-DbaPfDataCollectorSet\nAllows you to select a template, then deploys it to sql2017 and immediately starts the DataCollectorSet.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaPfDataCollectorSetTemplate | Select-Object *\nReturns more information about the template, including the full path/filename.",
        "Syntax":  "Get-DbaPfDataCollectorSetTemplate [[-Path] \u003cString[]\u003e] [[-Pattern] \u003cString\u003e] [[-Template] \u003cString[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaPlanCache",
        "Description":  "Checks adhoc and prepared plan cache for each database, if over 100 MB you should consider using Remove-DbaQueryPlan to clear the plan caches or turning on \"optimize for adhoc workloads\" configuration if running 2008 or later.\n\nReferences: https://www.sqlskills.com/blogs/kimberly/plan-cache-adhoc-workloads-and-clearing-the-single-use-plan-cache-bloat/\n\nNote: This command returns results from all SQL server instances on the destination server but the process column is specific to -SqlInstance passed.",
        "Tags":  "Memory",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer,SqlServers",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Tracy Boggiano, databasesuperhero.com",
        "Synopsis":  "Provides information about adhoc and prepared plan cache usage",
        "Name":  "Get-DbaPlanCache",
        "Links":  "https://dbatools.io/Get-DbaPlanCache",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaPlanCache -SqlInstance sql2017\nReturns the single use plan cache usage information for SQL Server instance 2017\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaPlanCache -SqlInstance sql2017 -SqlCredential sqladmin\nReturns the single use plan cache usage information for SQL Server instance 2017 using login \u0027sqladmin\u0027",
        "Syntax":  "Get-DbaPlanCache [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaPowerPlan",
        "Description":  "Gets the Power Plan settings on a computer against best practices recommendations.",
        "Tags":  "PowerPlan",
        "Params":  [
                       [
                           "ComputerName",
                           "The server(s) to check Power Plan settings on.",
                           "ServerInstance,SqlServer,SqlInstance",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Credential",
                           "Specifies a PSCredential object to use in authenticating to the server(s), instead of the current user account.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Gets the Power Plan settings for compliance with best practices, which recommend High Performance for SQL Server.",
        "Name":  "Get-DbaPowerPlan",
        "Links":  "https://dbatools.io/Get-DbaPowerPlan",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaPowerPlan -ComputerName sql2017\nGets the Power Plan settings for sql2017\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaPowerPlan -ComputerName sql2017 -Credential ad\\admin\nGets the Power Plan settings for sql2017 using an alternative credential",
        "Syntax":  "Get-DbaPowerPlan [-ComputerName] \u003cDbaInstanceParameter[]\u003e [[-Credential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaPrivilege",
        "Description":  "Gets the users with local privileges \u0027Lock Pages in Memory\u0027, \u0027Instant File Initialization\u0027, \u0027Logon as Batch\u0027 on one or more computers.\n\nRequires Local Admin rights on destination computer(s).",
        "Tags":  "Privilege",
        "Params":  [
                       [
                           "ComputerName",
                           "The target SQL Server instance or instances.",
                           "cn,host,Server",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Credential object used to connect to the computer as a different user.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Klaas Vandenberghe (@PowerDBAKlaas)",
        "Synopsis":  "Gets the users with local privileges on one or more computers.",
        "Name":  "Get-DbaPrivilege",
        "Links":  "https://dbatools.io/Get-DbaPrivilege",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaPrivilege -ComputerName sqlserver2014a\nGets the local privileges on computer sqlserver2014a.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e\u0027sql1\u0027,\u0027sql2\u0027,\u0027sql3\u0027 | Get-DbaPrivilege\nGets the local privileges on computers sql1, sql2 and sql3.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaPrivilege -ComputerName sql1,sql2 | Out-GridView\nGets the local privileges on computers sql1 and sql2, and shows them in a grid view.",
        "Syntax":  "Get-DbaPrivilege [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaProcess",
        "Description":  "This command displays processes associated with a spid, login, host, program or database.\n\nThanks to Michael J Swart at https://sqlperformance.com/2017/07/sql-performance/find-database-connection-leaks for the query to get the last executed SQL statement, minutesasleep and host process ID.",
        "Tags":  [
                     "Process",
                     "Session",
                     "ActivityMonitor"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Spid",
                           "Specifies one or more process IDs (Spid) to be displayed. Options for this parameter are auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeSpid",
                           "Specifies one ore more process IDs to exclude from display. Options for this parameter are auto-populated from the server.\nThis is the last filter to run, so even if a Spid matches another filter, it will be excluded by this filter.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Specifies one or more databases with active processes to look for. Options for this parameter are auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Login",
                           "Specifies one or more Login names with active processes to look for. Options for this parameter are auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Hostname",
                           "Specifies one or more hostnames with active processes to look for. Options for this parameter are auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Program",
                           "Specifies one or more program names with active processes to look for. Options for this parameter are auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeSystemSpids",
                           "If this switch is enabled, system Spids will be ignored.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "This command displays SQL Server processes.",
        "Name":  "Get-DbaProcess",
        "Links":  "https://dbatools.io/Get-DbaProcess",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaProcess -SqlInstance sqlserver2014a -Login base\\ctrlb, sa\nShows information about the processes for base\\ctrlb and sa on sqlserver2014a. Windows Authentication is used in connecting to sqlserver2014a.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaProcess -SqlInstance sqlserver2014a -SqlCredential $credential -Spid 56, 77\nShows information about the processes for spid 56 and 57. Uses alternative (SQL or Windows) credentials to authenticate to sqlserver2014a.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaProcess -SqlInstance sqlserver2014a -Program \u0027Microsoft SQL Server Management Studio\u0027\nShows information about the processes that were created in Microsoft SQL Server Management Studio.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaProcess -SqlInstance sqlserver2014a -Host workstationx, server100\nShows information about the processes that were initiated by hosts (computers/clients) workstationx and server 1000.",
        "Syntax":  "Get-DbaProcess [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Spid] \u003cInt32[]\u003e] [[-ExcludeSpid] \u003cInt32[]\u003e] [[-Database] \u003cString[]\u003e] [[-Login] \u003cString[]\u003e] [[-Hostname] \u003cString[]\u003e] [[-Program] \u003cString[]\u003e] [-ExcludeSystemSpids] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaProductKey",
        "Description":  "This command find the product key for all installed instances. Clustered instances are supported as well.\n\nUses key decoder by Jakob Bindslet (http://goo.gl/1jiwcB)",
        "Tags":  "ProductKey",
        "Params":  [
                       [
                           "ComputerName",
                           "The target SQL Server instance or instances.",
                           "SqlInstance",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "This command logs into the SQL instance to gather additional information.\nUse this parameter to connect to the discovered SQL instances using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Credential",
                           "Login to the target Windows instance using alternative credentials. Windows Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Get-DbaSqlProductKey,Get-SqlServerKey",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Gets SQL Server Product Keys from local or destination SQL Servers. Works with SQL Server 2005-2017",
        "Name":  "Get-DbaProductKey",
        "Links":  "https://dbatools.io/Get-DbaProductKey",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaProductKey -ComputerName winxp, sqlservera, sqlserver2014a, win2k8\nGets SQL Server versions, editions and product keys for all instances within each server or workstation.",
        "Syntax":  "Get-DbaProductKey [-ComputerName] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Credential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaQueryExecutionTime",
        "Description":  "Quickly find slow query executions within a database.  Results will include stored procedures and individual SQL statements.",
        "Tags":  [
                     "Query",
                     "Performance"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer,SqlServers",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "MaxResultsPerDb",
                           "Allows you to limit the number of results returned, as many systems can have very large amounts of query plans.  Default value is 100 results.",
                           "",
                           false,
                           "false",
                           "100"
                       ],
                       [
                           "MinExecs",
                           "Allows you to limit the scope to queries that have been executed a minimum number of time. Default value is 100 executions.",
                           "",
                           false,
                           "false",
                           "100"
                       ],
                       [
                           "MinExecMs",
                           "Allows you to limit the scope to queries with a specified average execution time.  Default value is 500 (ms).",
                           "",
                           false,
                           "false",
                           "500"
                       ],
                       [
                           "ExcludeSystem",
                           "Allows you to suppress output on system databases",
                           "ExcludeSystemDatabases",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Brandon Abshire, netnerds.net",
        "Synopsis":  "Displays Stored Procedures and Ad hoc queries with the highest execution times.  Works on SQL Server 2008 and above.",
        "Name":  "Get-DbaQueryExecutionTime",
        "Links":  "https://dbatools.io/Get-DbaQueryExecutionTime",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaQueryExecutionTime -SqlInstance sql2008, sqlserver2012\nReturn the top 100 slowest stored procedures or statements for servers sql2008 and sqlserver2012.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaQueryExecutionTime -SqlInstance sql2008 -Database TestDB\nReturn the top 100 slowest stored procedures or statements on server sql2008 for only the TestDB database.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaQueryExecutionTime -SqlInstance sql2008 -Database TestDB -MaxResultsPerDb 100 -MinExecs 200 -MinExecMs 1000\nReturn the top 100 slowest stored procedures or statements on server sql2008 for only the TestDB database, limiting results to queries with more than 200 total executions and an execution time over \r\n1000ms or higher.",
        "Syntax":  "Get-DbaQueryExecutionTime [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Database \u003cObject[]\u003e] [-ExcludeDatabase \u003cObject[]\u003e] [[-MaxResultsPerDb] \u003cInt32\u003e] [[-MinExecs] \u003cInt32\u003e] [[-MinExecMs] \u003cInt32\u003e] [[-ExcludeSystem]] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaRegistryRoot",
        "Description":  "Uses SQL WMI to find the Registry Root of each SQL Server instance on a computer",
        "Tags":  [
                     "Configuration",
                     "Registry"
                 ],
        "Params":  [
                       [
                           "ComputerName",
                           "The target computer. This is not a SQL Server service, though if you pass a named SQL instance, it\u0027ll parse properly down to the computer name",
                           "",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Allows you to login to $ComputerName using alternative Windows credentials",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Get-DbaSqlRegistryRoot",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Uses SQL WMI to find the Registry Root of each SQL Server instance on a computer",
        "Name":  "Get-DbaRegistryRoot",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaRegistryRoot\nGets the registry root for all instances on localhost\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaRegistryRoot -ComputerName server1\nGets the registry root for all instances on server1",
        "Syntax":  "Get-DbaRegistryRoot [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaRepDistributor",
        "Description":  "This function locates and enumerates distributor information for a given SQL Server instance.",
        "Tags":  "Replication",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer,SqlServers",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Get-DbaDistributor",
        "Author":  "William Durkin (@sql_williamd)",
        "Synopsis":  "Gets the information about a replication distributor for a given SQL Server instance.",
        "Name":  "Get-DbaRepDistributor",
        "Links":  "https://dbatools.io/Get-DbaRepDistributor",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaRepDistributor -SqlInstance sql2008, sqlserver2012\nRetrieve distributor information for servers sql2008 and sqlserver2012.",
        "Syntax":  "Get-DbaRepDistributor [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaRepPublication",
        "Description":  "Quickly find all transactional, merge, and snapshot publications on a specific server or database.",
        "Tags":  "Replication",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process. If unspecified, all databases will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "PublicationType",
                           "Limit by specific type of publication. Valid choices include: Transactional, Merge, Snapshot",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "byng this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Colin Douglas",
        "Synopsis":  "Displays all publications for a server or database.",
        "Name":  "Get-DbaRepPublication",
        "Links":  "https://dbatools.io/Get-DbaRepPublication",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaRepPublication -SqlInstance sql2008, sqlserver2012\nReturn all publications for servers sql2008 and sqlserver2012.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaRepPublication -SqlInstance sql2008 -Database TestDB\nReturn all publications on server sql2008 for only the TestDB database\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaRepPublication -SqlInstance sql2008 -PublicationType Transactional\nReturn all publications on server sql2008 for all databases that have Transactional publications",
        "Syntax":  "Get-DbaRepPublication [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-Database] \u003cObject[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-PublicationType] \u003cObject[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaRepServer",
        "Description":  "Gets a replication server object",
        "Tags":  "Replication",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Gets a replication server object",
        "Name":  "Get-DbaRepServer",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaRepServer -SqlInstance sql2016\nGets the replication server object for sql2016 using Windows authentication\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaRepServer -SqlInstance sql2016 -SqlCredential repadmin\nGets the replication server object for sql2016 using SQL authentication",
        "Syntax":  "Get-DbaRepServer [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaResourceGovernor",
        "Description":  "Gets the Resource Governor object",
        "Tags":  "ResourceGovernor",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to login to SQL Server using alternative credentials",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Gets the Resource Governor object",
        "Name":  "Get-DbaResourceGovernor",
        "Links":  "https://dbatools.io/Get-DbaResourceGovernor",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaResourceGovernor -SqlInstance sql2016\nGets the resource governor object of the SqlInstance sql2016\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e\u0027Sql1\u0027,\u0027Sql2/sqlexpress\u0027 | Get-DbaResourceGovernor\nGets the resource governor object on Sql1 and Sql2/sqlexpress instances",
        "Syntax":  "Get-DbaResourceGovernor [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaRgClassifierFunction",
        "Description":  "Gets the Resource Governor custom classifier Function which is used for customize the workload groups usage",
        "Tags":  [
                     "Migration",
                     "ResourceGovernor"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to login to SQL Server using alternative credentials",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Allows input to be piped from Get-DbaResourceGovernor",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Alessandro Alpi (@suxstellino), alessandroalpi.blog",
        "Synopsis":  "Gets the Resource Governor custom classifier Function",
        "Name":  "Get-DbaRgClassifierFunction",
        "Links":  "https://dbatools.io/Get-DbaRgClassifierFunction",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaRgClassifierFunction -SqlInstance sql2016\nGets the classifier function from sql2016\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e\u0027Sql1\u0027,\u0027Sql2/sqlexpress\u0027 | Get-DbaResourceGovernor | Get-DbaRgClassifierFunction\nGets the classifier function object on Sql1 and Sql2/sqlexpress instances",
        "Syntax":  "Get-DbaRgClassifierFunction [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-InputObject] \u003cResourceGovernor[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaRgResourcePool",
        "Description":  "Gets Resource Governor Pool objects, including internal or external",
        "Tags":  "ResourceGovernor",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to login to SQL Server using alternative credentials",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Type",
                           "Internal or External",
                           "",
                           false,
                           "false",
                           "Internal"
                       ],
                       [
                           "InputObject",
                           "Allows input to be piped from Get-DbaResourceGovernor",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Gets Resource Governor Pool objects, including internal or external",
        "Name":  "Get-DbaRgResourcePool",
        "Links":  "https://dbatools.io/Get-DbaRgResourcePool",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaRgResourcePool -SqlInstance sql2016\nGets the internal resource pools on sql2016\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e\u0027Sql1\u0027,\u0027Sql2/sqlexpress\u0027 | Get-DbaResourceGovernor | Get-DbaRgResourcePool\nGets the internal resource pools on Sql1 and Sql2/sqlexpress instances\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003e\u0027Sql1\u0027,\u0027Sql2/sqlexpress\u0027 | Get-DbaResourceGovernor | Get-DbaRgResourcePool -Type External\nGets the external resource pools on Sql1 and Sql2/sqlexpress instances",
        "Syntax":  "Get-DbaRgResourcePool [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Type] \u003cString\u003e] [[-InputObject] \u003cResourceGovernor[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaRgWorkloadGroup",
        "Description":  "Gets all Resource Governor Pool objects, including both internal and external",
        "Tags":  "ResourceGovernor",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to login to SQL Server using alternative credentials",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Allows input to be piped from Get-DbaRgResourcePool",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Gets all Resource Governor Pool objects, including both internal and external",
        "Name":  "Get-DbaRgWorkloadGroup",
        "Links":  "https://dbatools.io/Get-DbaRgWorkloadGroup",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaRgWorkloadGroup -SqlInstance sql2017\nGets the workload groups on sql2017\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaResourceGovernor -SqlInstance sql2017 | Get-DbaRgResourcePool | Get-DbaRgWorkloadGroup\nGets the workload groups on sql2017",
        "Syntax":  "Get-DbaRgWorkloadGroup [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-InputObject] \u003cResourcePool[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaRunningJob",
        "Description":  "This function returns agent jobs that active on the SQL Server instance when calling the command",
        "Tags":  [
                     "Agent",
                     "Job"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Enables piped input from Get-DbaAgentJob",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Stephen Bennett, https://sqlnotesfromtheunderground.wordpress.com/",
        "Synopsis":  "Returns all non-idle Agent jobs running on the server",
        "Name":  "Get-DbaRunningJob",
        "Links":  "https://dbatools.io/Get-DbaRunningJob",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaRunningJob -SqlInstance sql2017\nReturns any active jobs on sql2017\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaAgentJob -SqlInstance sql2017, sql2019 | Get-DbaRunningJob\nReturns all active jobs on multiple instances piped into the function.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003e$servers | Get-DbaRunningJob\nReturns all active jobs on multiple instances piped into the function.",
        "Syntax":  "Get-DbaRunningJob [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-InputObject] \u003cJob[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaSchemaChangeHistory",
        "Description":  "Queries the default system trace for any DDL changes in the specified time frame\nOnly works with SQL 2005 and later, as the system trace didn\u0027t exist before then",
        "Tags":  [
                     "Migration",
                     "Backup",
                     "Database"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Since",
                           "A date from which DDL changes should be returned. Default is to start at the beginning of the current trace file",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Object",
                           "The name of a SQL Server object you want to look for changes on",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Stuart Moore (@napalmgram - http://stuart-moore.com)",
        "Synopsis":  "Gets DDL changes logged in the system trace.",
        "Name":  "Get-DbaSchemaChangeHistory",
        "Links":  "https://dbatools.io/Get-DbaSchemaChangeHistory",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaSchemaChangeHistory -SqlInstance localhost\nReturns all DDL changes made in all databases on the SQL Server instance localhost since the system trace began\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaSchemaChangeHistory -SqlInstance localhost -Since (Get-Date).AddDays(-7)\nReturns all DDL changes made in all databases on the SQL Server instance localhost in the last 7 days\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaSchemaChangeHistory -SqlInstance localhost -Database Finance, Prod -Since (Get-Date).AddDays(-7)\nReturns all DDL changes made in the Prod and Finance databases on the SQL Server instance localhost in the last 7 days\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaSchemaChangeHistory -SqlInstance localhost -Database Finance -Object AccountsTable -Since (Get-Date).AddDays(-7)\nReturns all DDL changes made  to the AccountsTable object in the Finance database on the SQL Server instance localhost in the last 7 days",
        "Syntax":  "Get-DbaSchemaChangeHistory [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Database \u003cObject[]\u003e] [-ExcludeDatabase \u003cObject[]\u003e] [-Since \u003cDbaDateTime\u003e] [-Object \u003cString[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaServerAudit",
        "Description":  "The Get-DbaServerAudit command gets SQL Security Audit information for each instance(s) of SQL Server.",
        "Tags":  [
                     "Audit",
                     "Security",
                     "SqlAudit"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function\r\nto be executed against multiple SQL Server instances.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Audit",
                           "Return only specific audits",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeAudit",
                           "Exclude specific audits",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Garry Bargsley (@gbargsley), http://blog.garrybargsley.com",
        "Synopsis":  "Gets SQL Security Audit information for each instance(s) of SQL Server.",
        "Name":  "Get-DbaServerAudit",
        "Links":  "https://dbatools.io/Get-DbaServerAudit",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaServerAudit -SqlInstance localhost\nReturns all Security Audits on the local default SQL Server instance\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaServerAudit -SqlInstance localhost, sql2016\nReturns all Security Audits for the local and sql2016 SQL Server instances",
        "Syntax":  "Get-DbaServerAudit [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Audit \u003cString[]\u003e] [-ExcludeAudit \u003cString[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaServerAuditSpecification",
        "Description":  "The Get-DbaServerAuditSpecification command gets SQL Security Audit Specification information for each instance(s) of SQL Server.",
        "Tags":  [
                     "Audit",
                     "Security",
                     "SqlAudit"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function\r\nto be executed against multiple SQL Server instances.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Garry Bargsley (@gbargsley), http://blog.garrybargsley.com",
        "Synopsis":  "Gets SQL Security Audit Specification information for each instance(s) of SQL Server.",
        "Name":  "Get-DbaServerAuditSpecification",
        "Links":  "https://dbatools.io/Get-DbaServerAuditSpecification",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaServerAuditSpecification -SqlInstance localhost\nReturns all Security Audit Specifications on the local default SQL Server instance\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaServerAuditSpecification -SqlInstance localhost, sql2016\nReturns all Security Audit Specifications for the local and sql2016 SQL Server instances",
        "Syntax":  "Get-DbaServerAuditSpecification [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaServerInstallDate",
        "Description":  "This command returns:\nSqlInstallDate\nWindowsInstallDate (use -IncludeWindows)",
        "Tags":  "Install",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer,ComputerName",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Credential object used to connect to the SQL Server using SQL Authentication as a different user",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Credential",
                           "Credential object used to connect to the SQL Server as a different Windows user",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "IncludeWindows",
                           "Includes the Windows Server Install date information",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Mitchell Hamann (@SirCaptainMitch), mitchellhamann.com",
        "Synopsis":  "Returns the install date of a SQL Instance and Windows Server.",
        "Name":  "Get-DbaServerInstallDate",
        "Links":  "https://dbatools.io/Get-DbaServerInstallDate",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaServerInstallDate -SqlInstance SqlBox1\\Instance2\nReturns an object with SQL Instance Install date as a string.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaServerInstallDate -SqlInstance winserver\\sqlexpress, sql2016\nReturns an object with SQL Instance Install date as a string for both SQLInstances that are passed to the cmdlet.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003e\u0027sqlserver2014a\u0027, \u0027sql2016\u0027 | Get-DbaServerInstallDate\nReturns an object with SQL Instance Install date as a string for both SQLInstances that are passed to the cmdlet via the pipeline.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaServerInstallDate -SqlInstance sqlserver2014a, sql2016 -IncludeWindows\nReturns an object with the Windows Install date and the SQL install date as a string.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eGet-DbaCmsRegServer -SqlInstance sql2014 | Get-DbaServerInstallDate\nReturns an object with SQL Instance install date as a string for every server listed in the Central Management Server on sql2014",
        "Syntax":  "Get-DbaServerInstallDate [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Credential] \u003cPSCredential\u003e] [-IncludeWindows] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaServerProtocol",
        "Description":  "Gets the SQL Server related server protocols on one or more computers.\n\nRequires Local Admin rights on destination computer(s).\nThe server protocols can be enabled and disabled when retrieved via WSMan.",
        "Tags":  "Protocol",
        "Params":  [
                       [
                           "ComputerName",
                           "The target SQL Server instance or instances.",
                           "cn,host,Server",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Credential object used to connect to the computer as a different user.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Klaas Vandenberghe ( @PowerDBAKlaas )",
        "Synopsis":  "Gets the SQL Server related server protocols on a computer.",
        "Name":  "Get-DbaServerProtocol",
        "Links":  "https://dbatools.io/Get-DbaServerProtocol",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaServerProtocol -ComputerName sqlserver2014a\nGets the SQL Server related server protocols on computer sqlserver2014a.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e\u0027sql1\u0027,\u0027sql2\u0027,\u0027sql3\u0027 | Get-DbaServerProtocol\nGets the SQL Server related server protocols on computers sql1, sql2 and sql3.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaServerProtocol -ComputerName sql1,sql2 | Out-GridView\nGets the SQL Server related server protocols on computers sql1 and sql2, and shows them in a grid view.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003e(Get-DbaServerProtocol -ComputerName sql1 | Where { $_.DisplayName = \u0027via\u0027 }).Disable()\nDisables the VIA ServerNetworkProtocol on computer sql1.\r\nIf successful, return code 0 is shown.",
        "Syntax":  "Get-DbaServerProtocol [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaServerRole",
        "Description":  "Gets the list of server-level roles for SQL Server instance.",
        "Tags":  [
                     "ServerRole",
                     "Security"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. Server version must be SQL Server version 2005 or higher.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ServerRole",
                           "Server-Level role to filter results to that role only.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeServerRole",
                           "Server-Level role to exclude from results.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeFixedRole",
                           "Filter the fixed server-level roles. Only applies to SQL Server 2017 that supports creation of server-level roles.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message. This avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because \r\nit basically disables advanced scripting. Using this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Shawn Melton (@wsmelton)",
        "Synopsis":  "Gets the list of server-level roles.",
        "Name":  "Get-DbaServerRole",
        "Links":  "https://dbatools.io/Get-DbaServerRole",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaServerRole -SqlInstance sql2016a\nOutputs list of server-level roles for sql2016a instance.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaServerRole -SqlInstance sql2017a -ExcludeFixedRole\nOutputs the server-level role(s) that are not fixed roles on sql2017a instance.",
        "Syntax":  "Get-DbaServerRole [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-ServerRole \u003cString[]\u003e] [-ExcludeServerRole \u003cString[]\u003e] [-ExcludeFixedRole] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaServerRoleMember",
        "Description":  "The Get-DbaServerRoleMember returns connected SMO object for server roles for each instance(s) of SQL Server.",
        "Tags":  [
                     "ServerRole",
                     "Security",
                     "Login"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternate Windows or SQL Login Authentication. Accepts credential objects (Get-Credential).",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ServerRole",
                           "The role(s) to process. If unspecified, all roles will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeServerRole",
                           "The role(s) to exclude.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Login",
                           "The login(s) to process. If unspecified, all logins will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeFixedRole",
                           "Filter the fixed server-level roles. Only applies to SQL Server 2017 that supports creation of server-level roles.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Klaas Vandenberghe (@PowerDBAKlaas)",
        "Synopsis":  "Get members of server roles for each instance(s) of SQL Server.",
        "Name":  "Get-DbaServerRoleMember",
        "Links":  "https://dbatools.io/Get-DbaServerRoleMember",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaServerRoleMember -SqlInstance localhost\nReturns all members of all server roles on the local default SQL Server instance\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaServerRoleMember -SqlInstance localhost, sql2016\nReturns all members of all server roles on the local and sql2016 SQL Server instances\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003e$servers = Get-Content C:\\servers.txt\nPS C:\\\u003e $servers | Get-DbaServerRoleMember\nReturns all members of all server roles for every server in C:\\servers.txt\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaServerRoleMember -SqlInstance localhost -ServerRole \u0027sysadmin\u0027, \u0027dbcreator\u0027\nReturns all members of the sysadmin or dbcreator roles on localhost.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eGet-DbaServerRoleMember -SqlInstance localhost -ExcludeServerRole \u0027sysadmin\u0027\nReturns all members of server-level roles other than sysadmin.\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eGet-DbaServerRoleMember -SqlInstance sql2017a -ExcludeFixedRole\nReturns all members of server-level role(s) that are not fixed roles on sql2017a instance.\n-------------------------- EXAMPLE 7 --------------------------\nPS C:\\\u003eGet-DbaServerRoleMember -SqlInstance localhost -Login \u0027MyFriendlyDeveloper\u0027\nReturns all server-level role(s) for the MyFriendlyDeveloper login on localhost.",
        "Syntax":  "Get-DbaServerRoleMember [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-ServerRole \u003cString[]\u003e] [-ExcludeServerRole \u003cString[]\u003e] [-Login \u003cObject[]\u003e] [-ExcludeFixedRole] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaServerTrigger",
        "Description":  "Get all existing server triggers on one or more SQL instances.",
        "Tags":  [
                     "Database",
                     "Trigger"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "SqlCredential object used to connect to the SQL Server as a different user.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Get all existing server triggers on one or more SQL instances.",
        "Name":  "Get-DbaServerTrigger",
        "Links":  "https://dbatools.io/Get-DbaServerTrigger",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaServerTrigger -SqlInstance sql2017\nReturns all server triggers on sql2017",
        "Syntax":  "Get-DbaServerTrigger [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaService",
        "Description":  "Gets the SQL Server related services on one or more computers.\n\nRequires Local Admin rights on destination computer(s).",
        "Tags":  [
                     "Service",
                     "SqlServer",
                     "Instance",
                     "Connect"
                 ],
        "Params":  [
                       [
                           "ComputerName",
                           "The target SQL Server instance or instances.",
                           "cn,host,Server",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "InstanceName",
                           "Only returns services that belong to the specific instances.",
                           "Instance",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Credential",
                           "Credential object used to connect to the computer as a different user.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Type",
                           "Use -Type to collect only services of the desired SqlServiceType.\r\nCan be one of the following: \"Agent\",\"Browser\",\"Engine\",\"FullText\",\"SSAS\",\"SSIS\",\"SSRS\", \"PolyBase\"",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ServiceName",
                           "Can be used to specify service names explicitly, without looking for service types/instances.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AdvancedProperties",
                           "Collect additional properties from the SqlServiceAdvancedProperty Namespace\r\nThis collects information about Version, Service Pack Level\", SkuName, Clustered status and the Cluster Service Name\r\nThis adds additional overhead to the command.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Get-DbaSqlService",
        "Author":  "Klaas Vandenberghe ( @PowerDBAKlaas )",
        "Synopsis":  "Gets the SQL Server related services on a computer.",
        "Name":  "Get-DbaService",
        "Links":  "https://dbatools.io/Get-DbaService",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaService -ComputerName sqlserver2014a\nGets the SQL Server related services on computer sqlserver2014a.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e\u0027sql1\u0027,\u0027sql2\u0027,\u0027sql3\u0027 | Get-DbaService -AdvancedProperties\nGets the SQL Server related services on computers sql1, sql2 and sql3. Includes Advanced Properties from the SqlServiceAdvancedProperty Namespace\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003e$cred = Get-Credential WindowsUser\nPS C:\\\u003e Get-DbaService -ComputerName sql1,sql2 -Credential $cred  | Out-GridView\nGets the SQL Server related services on computers sql1 and sql2 via the user WindowsUser, and shows them in a grid view.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaService -ComputerName sql1,sql2 -InstanceName MSSQLSERVER\nGets the SQL Server related services related to the default instance MSSQLSERVER on computers sql1 and sql2.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eGet-DbaService -ComputerName $MyServers -Type SSRS\nGets the SQL Server related services of type \"SSRS\" (Reporting Services) on computers in the variable MyServers.\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003e$MyServers =  Get-Content .\\servers.txt\nPS C:\\\u003e Get-DbaService -ComputerName $MyServers -ServiceName MSSQLSERVER,SQLSERVERAGENT\nGets the SQL Server related services with ServiceName MSSQLSERVER or SQLSERVERAGENT  for all the servers that are stored in the file. Every line in the file can only contain one hostname for a server.\n-------------------------- EXAMPLE 7 --------------------------\nPS C:\\\u003e$services = Get-DbaService -ComputerName sql1 -Type Agent,Engine\nPS C:\\\u003e $services.ChangeStartMode(\u0027Manual\u0027)\nGets the SQL Server related services of types Sql Agent and DB Engine on computer sql1 and changes their startup mode to \u0027Manual\u0027.\n-------------------------- EXAMPLE 8 --------------------------\nPS C:\\\u003e(Get-DbaService -ComputerName sql1 -Type Engine).Restart($true)\nCalls a Restart method for each Engine service on computer sql1.",
        "Syntax":  "Get-DbaService [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [-InstanceName \u003cString[]\u003e] [-Credential \u003cPSCredential\u003e] [-Type \u003cString[]\u003e] [-AdvancedProperties] [-EnableException] [\u003cCommonParameters\u003e]\nGet-DbaService [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [-Credential \u003cPSCredential\u003e] [-ServiceName \u003cString[]\u003e] [-AdvancedProperties] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaSpConfigure",
        "Description":  "This function returns server level system configuration (sys.configuration/sp_configure) information. The information is gathered through SMO Configuration.Properties.\nThe data includes the default value for each configuration, for quick identification of values that may have been changed.",
        "Tags":  [
                     "SpConfig",
                     "Configure",
                     "Configuration"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input",
                           "ServerInstance,SqlServer,SqlServers",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Name",
                           "Return only specific configurations. Name can be either values from (sys.configuration/sp_configure) or from SMO object",
                           "Config,ConfigName",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeName",
                           "Exclude specific configurations. Name can be either values from (sys.configuration/sp_configure) or from SMO object",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Nic Cain, https://sirsql.net/",
        "Synopsis":  "Returns all server level system configuration (sys.configuration/sp_configure) information",
        "Name":  "Get-DbaSpConfigure",
        "Links":  "https://dbatools.io/Get-DbaSpConfigure",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaSpConfigure -SqlInstance localhost\nReturns all system configuration information on the localhost.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e\u0027localhost\u0027,\u0027localhost\\namedinstance\u0027 | Get-DbaSpConfigure\nReturns system configuration information on multiple instances piped into the function\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaSpConfigure -SqlInstance sql2012 -Name \u0027max server memory (MB)\u0027\nReturns only the system configuration for MaxServerMemory on sql2012.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaSpConfigure -SqlInstance sql2012 -ExcludeName \u0027max server memory (MB)\u0027, RemoteAccess | Out-GridView\nReturns system configuration information on sql2012 but excludes for max server memory (MB) and remote access. Values returned in grid view\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003e$cred = Get-Credential SqlCredential\nPS C:\\\u003e \u0027sql2012\u0027 | Get-DbaSpConfigure -SqlCredential $cred -Name RemoteAccess, \u0027max server memory (MB)\u0027 -ExcludeName \u0027remote access\u0027 | Out-GridView\nReturns system configuration information on sql2012 using SQL Server Authentication. Only MaxServerMemory is returned as RemoteAccess was also excluded.",
        "Syntax":  "Get-DbaSpConfigure [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Name \u003cString[]\u003e] [-ExcludeName \u003cString[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaSpinLockStatistic",
        "Description":  "This command is based off of Paul Randal\u0027s post \"Advanced SQL Server performance tuning\"\n\nReturns:\n        SpinLockName\n        Collisions\n        Spins\n        SpinsPerCollision\n        SleepTime\n        Backoffs\n\nReference:  https://www.sqlskills.com/blogs/paul/advanced-performance-troubleshooting-waits-latches-spinlocks/",
        "Tags":  [
                     "SpinLockStatistics",
                     "Waits"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The SQL Server instance. Server version must be SQL Server version 2008 or higher.",
                           "ServerInstance,SqlServer,SqlServers",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Patrick Flynn (@sqllensman)",
        "Synopsis":  "Displays information from sys.dm_os_spinlock_stats.  Works on SQL Server 2008 and above.",
        "Name":  "Get-DbaSpinLockStatistic",
        "Links":  "https://dbatools.io/Get-DbaSpinLockStatistic",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaSpinLockStatistic -SqlInstance sql2008, sqlserver2012\nGet SpinLock Statistics for servers sql2008 and sqlserver2012.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e$output = Get-DbaSpinLockStatistic -SqlInstance sql2008 | Select * | ConvertTo-DbaDataTable\nCollects all SpinLock Statistics on server sql2008 into a Data Table.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003e\u0027sql2008\u0027,\u0027sqlserver2012\u0027 | Get-DbaSpinLockStatistic\nGet SpinLock Statistics for servers sql2008 and sqlserver2012 via pipline\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003e$cred = Get-Credential sqladmin\nPS C:\\\u003e Get-DbaSpinLockStatistic -SqlInstance sql2008 -SqlCredential $cred\nConnects using sqladmin credential and returns SpinLock Statistics from sql2008",
        "Syntax":  "Get-DbaSpinLockStatistic [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaSpn",
        "Description":  "Get a list of set SPNs. SPNs are set at the AD account level. You can either retrieve set SPNs for a computer, or any SPNs set for\na given active directory account. You can query one, or both. You\u0027ll get a list of every SPN found for either search term.",
        "Tags":  "SPN",
        "Params":  [
                       [
                           "ComputerName",
                           "The servers you want to return set SPNs for. This is defaulted automatically to localhost.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "AccountName",
                           "The accounts you want to retrieve set SPNs for.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Credential",
                           "User credential to connect to the remote servers or active directory.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Drew Furgiuele (@pittfurg), http://www.port1433.com",
        "Synopsis":  "Returns a list of set service principal names for a given computer/AD account",
        "Name":  "Get-DbaSpn",
        "Links":  "https://dbatools.io/Get-DbaSpn",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaSpn -ComputerName SQLSERVERA -Credential ad\\sqldba\nReturns a custom object with SearchTerm (ServerName) and the SPNs that were found\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaSpn -AccountName domain\\account -Credential ad\\sqldba\nReturns a custom object with SearchTerm (domain account) and the SPNs that were found\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaSpn -ComputerName SQLSERVERA,SQLSERVERB -Credential ad\\sqldba\nReturns a custom object with SearchTerm (ServerName) and the SPNs that were found for multiple computers",
        "Syntax":  "Get-DbaSpn [[-ComputerName] \u003cString[]\u003e] [[-AccountName] \u003cString[]\u003e] [[-Credential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaSsisEnvironmentVariable",
        "Description":  "This command gets all variables from specified environment from SSIS Catalog. All sensitive values are decrypted.\nThe function communicates directly with SSISDB database, \"SQL Server Integration Services\" service isn\u0027t queried there.\nEach parameter (besides SqlInstance and SqlCredential) acts as the filter to only include or exclude particular element",
        "Tags":  [
                     "SSIS",
                     "SSISDB",
                     "Variable"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.\r\nThis can be a collection and receive pipeline input to allow the function\r\nto be executed against multiple SQL Server instances.",
                           "SqlServer,ServerInstance",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Environment",
                           "The SSIS Environments names that we want to get variables from",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnvironmentExclude",
                           "The SSIS Environments to exclude. Acts as a filter for environments, best used without \u0027Environment\u0027 parameter\r\nto get variables for all environments but excluded ones",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Folder",
                           "The Folders names that contain the environments",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "FolderExclude",
                           "The Folders names to exclude. Acts as a filter for folders containing environments, best user without \u0027Folder\u0027 parameter\r\nto get variables for all folders but excluded ones",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Bartosz Ratajczyk (@b_ratajczyk)",
        "Synopsis":  "This command gets specified SSIS Environment and all its variables",
        "Name":  "Get-DbaSsisEnvironmentVariable",
        "Links":  "https://dbatools.io/Get-DbaSsisEnvironmentVariable",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaSsisEnvironmentVariable -SqlInstance localhost -Environment DEV -Folder DWH_ETL\nGets variables of \u0027DEV\u0027 environment located in \u0027DWH_ETL\u0027 folder on \u0027localhost\u0027 Server\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaSsisEnvironmentVariable -SqlInstance localhost -Environment DEV -Folder DWH_ETL, DEV2, QA\nGets variables of \u0027DEV\u0027 environment(s) located in folders \u0027DWH_ETL\u0027, \u0027DEV2\u0027 and \u0027QA\u0027 on \u0027localhost\u0027 server\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaSsisEnvironmentVariable -SqlInstance localhost -Environment DEV -FolderExclude DWH_ETL, DEV2, QA\nGets variables of \u0027DEV\u0027 environments located in folders other than \u0027DWH_ETL\u0027, \u0027DEV2\u0027 and \u0027QA\u0027 on \u0027localhost\u0027 server\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaSsisEnvironmentVariable -SqlInstance localhost -Environment DEV, PROD -Folder DWH_ETL, DEV2, QA\nGets variables of \u0027DEV\u0027 and \u0027PROD\u0027 environment(s) located in folders \u0027DWH_ETL\u0027, \u0027DEV2\u0027 and \u0027QA\u0027 on \u0027localhost\u0027 server\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eGet-DbaSsisEnvironmentVariable -SqlInstance localhost -EnvironmentExclude DEV, PROD -Folder DWH_ETL, DEV2, QA\nGets variables of environments other than \u0027DEV\u0027 and \u0027PROD\u0027 located in folders \u0027DWH_ETL\u0027, \u0027DEV2\u0027 and \u0027QA\u0027 on \u0027localhost\u0027 server\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eGet-DbaSsisEnvironmentVariable -SqlInstance localhost -EnvironmentExclude DEV, PROD -FolderExclude DWH_ETL, DEV2, QA\nGets variables of environments other than \u0027DEV\u0027 and \u0027PROD\u0027 located in folders other than \u0027DWH_ETL\u0027, \u0027DEV2\u0027 and \u0027QA\u0027 on \u0027localhost\u0027 server\n-------------------------- EXAMPLE 7 --------------------------\nPS C:\\\u003e\u0027localhost\u0027 | Get-DbaSsisEnvironmentVariable -EnvironmentExclude DEV, PROD\nGets all SSIS environments except \u0027DEV\u0027 and \u0027PROD\u0027 from \u0027localhost\u0027 server. The server name comes from pipeline\n-------------------------- EXAMPLE 8 --------------------------\nPS C:\\\u003e\u0027SRV1\u0027, \u0027SRV3\u0027 | Get-DbaSsisEnvironmentVariable\nGets all SSIS environments from \u0027SRV1\u0027 and \u0027SRV3\u0027 servers. The server\u0027s names come from pipeline\n-------------------------- EXAMPLE 9 --------------------------\nPS C:\\\u003e\u0027SRV1\u0027, \u0027SRV2\u0027 | Get-DbaSsisEnvironmentVariable DEV | Out-GridView\nGets all variables from \u0027DEV\u0027 Environment(s) on servers \u0027SRV1\u0027 and \u0027SRV2\u0027 and outputs it as the GridView.\r\nThe server names come from the pipeline.\n-------------------------- EXAMPLE 10 --------------------------\nPS C:\\\u003e\u0027localhost\u0027 | Get-DbaSsisEnvironmentVariable -EnvironmentExclude DEV, PROD | Select-Object -Property Name, Value | Where-Object {$_.Name -match \u0027^a\u0027} | Out-GridView\nGets all variables from Environments other than \u0027DEV\u0027 and \u0027PROD\u0027 on \u0027localhost\u0027 server,\r\nselects Name and Value properties for variables that names start with letter \u0027a\u0027 and outputs it as the GridView",
        "Syntax":  "Get-DbaSsisEnvironmentVariable [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Environment] \u003cObject[]\u003e] [[-EnvironmentExclude] \u003cObject[]\u003e] [[-Folder] \u003cObject[]\u003e] [[-FolderExclude] \u003cObject[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaSsisExecutionHistory",
        "Description":  "This command gets execution history for SSIS executison given one or more instances and can be filtered by Project, Environment,Folder or Status.",
        "Tags":  [
                     "Migration",
                     "SSIS"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.\r\nThis can be a collection and receive pipeline input to allow the function\r\nto be executed against multiple SQL Server instances.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Since",
                           "Datetime object used to narrow the results to a date",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Status",
                           "Specifies a filter by status (created,running,cancelled,failed,pending,halted,succeeded,stopping,completed)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Project",
                           "Specifies a filter by project",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Folder",
                           "Specifies a filter by folder",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Environment",
                           "Specifies a filter by environment",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chris Tucker (@ChrisTuc47368095)",
        "Synopsis":  "Get-DbaSsisHistory Retreives SSIS project and package execution History, and environments from one SQL Server to another.",
        "Name":  "Get-DbaSsisExecutionHistory",
        "Links":  "https://dbatools.io/Get-DbaSsisExecutionHistory",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaSsisExecutionHistory -SqlInstance SMTQ01 -Folder SMTQ_PRC\nGet all history items for SMTQ01 in folder SMTQ_PRC.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaSsisExecutionHistory -SqlInstance SMTQ01 -Status Failed,Cancelled\nGets all failed or canceled executions for SMTQ01.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaSsisExecutionHistory -SqlInstance SMTQ01,SMTQ02 -Status Failed,Cancelled -Whatif\nShows what would happen if the command were executed and would return the SQL statement that would be executed per instance.",
        "Syntax":  "Get-DbaSsisExecutionHistory [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Since] \u003cDateTime\u003e] [[-Status] \u003cString[]\u003e] [[-Project] \u003cString[]\u003e] [[-Folder] \u003cString[]\u003e] [[-Environment] \u003cString[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaStartupParameter",
        "Description":  "Displays values for a detailed list of SQL Server Startup Parameters including Master Data Path, Master Log path, Error Log, Trace Flags, Parameter String and much more.\n\nThis command relies on remote Windows Server (SQL WMI/WinRm) access. You can pass alternative Windows credentials by using the -Credential parameter.\n\nSee https://msdn.microsoft.com/en-us/library/ms190737.aspx for more information.",
        "Tags":  [
                     "WSMan",
                     "SQLWMI",
                     "Memory"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Credential",
                           "Allows you to login to servers using alternate Windows credentials.\n$scred = Get-Credential, then pass $scred object to the -Credential parameter.",
                           "SqlCredential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Simple",
                           "If this switch is enabled, simplified output will be produced including only Server, Master Data Path, Master Log path, ErrorLog, TraceFlags and ParameterString.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "If this switch is enabled, exceptions will be thrown to the caller, which will need to perform its own exception processing. Otherwise, the function will try to catch the exception, interpret it and \r\nprovide a friendly error message.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Displays values for a detailed list of SQL Server Startup Parameters.",
        "Name":  "Get-DbaStartupParameter",
        "Links":  "https://dbatools.io/Get-DbaStartupParameter",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaStartupParameter -SqlInstance sql2014\nLogs into SQL WMI as the current user then displays the values for numerous startup parameters.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e$wincred = Get-Credential ad\\sqladmin\nPS C:\\\u003e Get-DbaStartupParameter -SqlInstance sql2014 -Credential $wincred -Simple\nLogs in to WMI using the ad\\sqladmin credential and gathers simplified information about the SQL Server Startup Parameters.",
        "Syntax":  "Get-DbaStartupParameter [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-Credential] \u003cPSCredential\u003e] [-Simple] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaSuspectPage",
        "Description":  "This function returns any records that were stored due to suspect pages in databases on a SQL Server Instance.",
        "Tags":  [
                     "Pages",
                     "DBCC"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Database",
                           "The database to return. If unspecified, all records will be returned.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "A credential to use to connect to the SQL Instance rather than using Windows Authentication",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Garry Bargsley (@gbargsley), http://blog.garrybargsley.com",
        "Synopsis":  "Returns data that is stored in SQL for Suspect Pages on the specified SQL Server Instance",
        "Name":  "Get-DbaSuspectPage",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaSuspectPage -SqlInstance sql2016\nRetrieve any records stored for Suspect Pages on the sql2016 SQL Server.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaSuspectPage -SqlInstance sql2016 -Database Test\nRetrieve any records stored for Suspect Pages on the sql2016 SQL Server and the Test database only.",
        "Syntax":  "Get-DbaSuspectPage [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-Database \u003cObject\u003e] [-SqlCredential \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaTcpPort",
        "Description":  "By default, this function returns just the TCP port used by the specified SQL Server.\n\nIf -All is specified, the server name, IPAddress (ipv4 and ipv6), port number and an indicator of whether or not the port assignment is static are returned.\n\nRemote sqlwmi is used by default. If this doesn\u0027t work, then remoting is used. If neither work, it defaults to T-SQL which can provide only the port.",
        "Tags":  [
                     "SQLWMI",
                     "tcp"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to connect to servers using alternate Windows credentials\n$scred = Get-Credential, then pass $scred object to the -SqlCredential parameter.",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Detailed",
                           "Output all properties, will be deprecated in 1.0.0 release. Use All instead.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "All",
                           "If this switch is enabled, an object with server name, IPAddress (ipv4 and ipv6), port and static ($true/$false) for one or more SQL Servers is returned.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "ExcludeIpv6",
                           "If this switch is enabled, IPv6 information is excluded from All output.",
                           "Ipv4",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Returns the TCP port used by the specified SQL Server.",
        "Name":  "Get-DbaTcpPort",
        "Links":  "https://dbatools.io/Get-DbaTcpPort",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaTcpPort -SqlInstance sqlserver2014a\nReturns just the port number for the default instance on sqlserver2014a.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaTcpPort -SqlInstance winserver\\sqlexpress, sql2016\nReturns an object with server name and port number for the sqlexpress on winserver and the default instance on sql2016.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaTcpPort -SqlInstance sqlserver2014a, sql2016 -All\nReturns an object with server name, IPAddress (ipv4 and ipv6), port and static ($true/$false) for sqlserver2014a and sql2016.\nRemote sqlwmi is used by default. If this doesn\u0027t work, then remoting is used. If neither work, it defaults to T-SQL which can provide only the port.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaCmsRegServer -SqlInstance sql2014 | Get-DbaTcpPort -ExcludeIpv6 -All\nReturns an object with server name, IPAddress (just ipv4), port and static ($true/$false) for every server listed in the Central Management Server on sql2014.",
        "Syntax":  "Get-DbaTcpPort [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-Detailed] [-All] [-ExcludeIpv6] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaTempdbUsage",
        "Description":  "This function queries DMVs for running sessions using tempdb and returns results if those sessions have user or internal space allocated or deallocated against them.",
        "Tags":  [
                     "Tempdb",
                     "Space"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "If you want to use alternative credentials to connect to the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Gets Tempdb usage for running queries.",
        "Name":  "Get-DbaTempdbUsage",
        "Links":  "https://dbatools.io/Get-DbaTempdbUsage",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaTempdbUsage -SqlInstance localhost\\SQLDEV2K14\nGets tempdb usage for localhost\\SQLDEV2K14",
        "Syntax":  "Get-DbaTempdbUsage [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbatoolsConfig",
        "Description":  "Retrieves configuration elements by name.\nCan be used to search the existing configuration list.",
        "Tags":  [
                     "Config",
                     "Module"
                 ],
        "Params":  [
                       [
                           "FullName",
                           "Default: \"*\"\r\nSearch for configurations using the full name",
                           "",
                           false,
                           "false",
                           "*"
                       ],
                       [
                           "Name",
                           "Default: \"*\"\r\nThe name of the configuration element(s) to retrieve.\r\nMay be any string, supports wildcards.",
                           "",
                           false,
                           "false",
                           "*"
                       ],
                       [
                           "Module",
                           "Default: \"*\"\r\nSearch configuration by module.",
                           "",
                           false,
                           "false",
                           "*"
                       ],
                       [
                           "Force",
                           "Overrides the default behavior and also displays hidden configuration values.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Get-DbaConfig",
        "Author":  "Friedrich Weinmann (@FredWeinmann)",
        "Synopsis":  "Retrieves configuration elements by name.",
        "Name":  "Get-DbatoolsConfig",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbatoolsConfig \u0027Mail.To\u0027\nRetrieves the configuration element for the key \"Mail.To\"\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbatoolsConfig -Force\nRetrieve all configuration elements from all modules, even hidden ones.",
        "Syntax":  "Get-DbatoolsConfig [[-FullName] \u003cString\u003e] [-Force] [\u003cCommonParameters\u003e]\nGet-DbatoolsConfig [[-Name] \u003cString\u003e] [[-Module] \u003cString\u003e] [-Force] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbatoolsConfigValue",
        "Description":  "Returns the configuration value stored under the specified name.\nIt requires the full name (\u003cModule\u003e.\u003cName\u003e) and is usually only called by functions.",
        "Tags":  [
                     "Config",
                     "Module"
                 ],
        "Params":  [
                       [
                           "FullName",
                           "The full name (\u003cModule\u003e.\u003cName\u003e) of the configured value to return.",
                           "Name",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "Fallback",
                           "A fallback value to use, if no value was registered to a specific configuration element.\r\nThis basically is a default value that only applies on a \"per call\" basis, rather than a system-wide default.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "NotNull",
                           "By default, this function returns null if one tries to retrieve the value from either a Configuration that does not exist or a Configuration whose value was set to null.\r\nHowever, sometimes it may be important that some value was returned.\r\nBy specifying this parameter, the function will throw an error if no value was found at all.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Get-DbaConfigValue",
        "Author":  "Friedrich Weinmann (@FredWeinmann)",
        "Synopsis":  "Returns the configuration value stored under the specified name.",
        "Name":  "Get-DbatoolsConfigValue",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbatoolsConfigValue -Name \u0027System.MailServer\u0027\nReturns the configured value that was assigned to the key \u0027System.MailServer\u0027\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbatoolsConfigValue -Name \u0027Default.CoffeeMilk\u0027 -Fallback 0\nReturns the configured value for \u0027Default.CoffeeMilk\u0027. If no such value is configured, it returns \u00270\u0027 instead.",
        "Syntax":  "Get-DbatoolsConfigValue [-FullName] \u003cString\u003e [[-Fallback] \u003cObject\u003e] [-NotNull] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbatoolsLog",
        "Description":  "Returns log entries for dbatools. Handy when debugging or developing a script using it.",
        "Tags":  "Debug",
        "Params":  [
                       [
                           "FunctionName",
                           "Default: \"*\"\r\nOnly messages written by similar functions will be returned.",
                           "",
                           false,
                           "false",
                           "*"
                       ],
                       [
                           "ModuleName",
                           "Default: \"*\"\r\nOnly messages written by commands from similar modules will be returned.",
                           "",
                           false,
                           "false",
                           "*"
                       ],
                       [
                           "Target",
                           "Only messags handling the specified target will be returned.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Tag",
                           "Only messages containing one of these tags will be returned.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Last",
                           "Only messages written by the last X executions will be returned.\r\nUses Get-History to determine execution. Ignores Get-message commands.\r\nBy default, this will also include messages from other runspaces. If your command executes in parallel, that\u0027s useful.\r\nIf it doesn\u0027t and you were offloading executions to other runspaces, consider also filtering by runspace using \u0027-Runspace\u0027",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "Skip",
                           "How many executions to skip when specifying \u0027-Last\u0027.\r\nHas no effect without the \u0027-Last\u0027 parameter.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "Runspace",
                           "The guid of the runspace to return messages from.\r\nBy default, messages from all runspaces are returned.\r\nRun the following line to see the list of guids:\nGet-Runspace | ft Id, Name, InstanceId -Autosize",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Level",
                           "Limit the message selection by level.\r\nMessage levels have a numeric value, making it easier to select a range:\n-Level (1..6)\nWill select the first 6 levels (Critical - SomewhatVerbose).",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Raw",
                           "By default, messages such as SQL statements are flattened. Use raw to see the output without flattened formatting.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Errors",
                           "Instead of log entries, the error entries will be retrieved",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Friedrich Weinmann (@FredWeinmann)",
        "Synopsis":  "Returns log entries for dbatools",
        "Name":  "Get-DbatoolsLog",
        "Links":  "https://dbatools.io/Get-DbatoolsLog",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbatoolsLog\nReturns all log entries currently in memory.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbatoolsLog -Target \"a\" -Last 1 -Skip 1\nReturns all log entries that targeted the object \"a\" in the second last execution sent.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbatoolsLog -Tag \"fail\" -Last 5\nReturns all log entries within the last 5 executions that contained the tag \"fail\"",
        "Syntax":  "Get-DbatoolsLog [[-FunctionName] \u003cString\u003e] [[-ModuleName] \u003cString\u003e] [[-Target] \u003cObject\u003e] [[-Tag] \u003cString[]\u003e] [[-Last] \u003cInt32\u003e] [[-Skip] \u003cInt32\u003e] [[-Runspace] \u003cGuid\u003e] [[-Level] {Critical | Important | Output | Significant | VeryVerbose | Verbose | SomewhatVerbose | System | Debug | InternalComment | Warning}] [-Raw] [-Errors] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaTopResourceUsage",
        "Description":  "Returns the top 20 resource consumers for cached queries based on four different metrics: duration, frequency, IO, and CPU.\n\nThis command is based off of queries provided by Michael J. Swart at http://michaeljswart.com/go/Top20\n\nPer Michael: \"I\u0027ve posted queries like this before, and others have written many other versions of this query. All these queries are based on sys.dm_exec_query_stats.\"",
        "Tags":  [
                     "Query",
                     "Performance"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer,SqlServers",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Type",
                           "By default, all Types run but you can specify one or more of the following: Duration, Frequency, IO, or CPU",
                           "",
                           false,
                           "false",
                           "All"
                       ],
                       [
                           "Limit",
                           "By default, these query the Top 20 worst offenders (though more than 20 results can be returned if each of the top 20 have more than 1 subsequent result)",
                           "",
                           false,
                           "false",
                           "20"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "ExcludeSystem",
                           "This will exclude system objects like replication procedures from being returned.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Returns the top 20 resource consumers for cached queries based on four different metrics: duration, frequency, IO, and CPU.",
        "Name":  "Get-DbaTopResourceUsage",
        "Links":  "https://dbatools.io/Get-DbaTopResourceUsage",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaTopResourceUsage -SqlInstance sql2008, sql2012\nReturn the 80 (20 x 4 types) top usage results by duration, frequency, IO, and CPU servers for servers sql2008 and sql2012\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaTopResourceUsage -SqlInstance sql2008 -Type Duration, Frequency -Database TestDB\nReturn the highest usage by duration (top 20) and frequency (top 20) for the TestDB on sql2008\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaTopResourceUsage -SqlInstance sql2016 -Limit 30\nReturn the highest usage by duration (top 30) and frequency (top 30) for the TestDB on sql2016\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaTopResourceUsage -SqlInstance sql2008, sql2012 -ExcludeSystem\nReturn the 80 (20 x 4 types) top usage results by duration, frequency, IO, and CPU servers for servers sql2008 and sql2012 without any System Objects\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eGet-DbaTopResourceUsage -SqlInstance sql2016| Select-Object *\nReturn all the columns plus the QueryPlan column",
        "Syntax":  "Get-DbaTopResourceUsage [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Database \u003cObject[]\u003e] [-ExcludeDatabase \u003cObject[]\u003e] [-Type \u003cString[]\u003e] [-Limit \u003cInt32\u003e] [-EnableException] [-ExcludeSystem] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaTrace",
        "Description":  "This function returns a list of traces on a SQL Server instance and identifies the default trace file",
        "Tags":  [
                     "Security",
                     "Trace"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "A credential to use to connect to the SQL Instance rather than using Windows Authentication",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Id",
                           "The id(s) of the Trace",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Default",
                           "Switch that will only return the information for the default system trace",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Get-DbaTraceFile",
        "Author":  "Garry Bargsley (@gbargsley), http://blog.garrybargsley.com",
        "Synopsis":  "Gets a list of trace(s) from specified SQL Server Instance",
        "Name":  "Get-DbaTrace",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaTrace -SqlInstance sql2016\nLists all the trace files on the sql2016 SQL Server.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaTrace -SqlInstance sql2016 -Default\nLists the default trace information on the sql2016 SQL Server.",
        "Syntax":  "Get-DbaTrace [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Id \u003cInt32[]\u003e] [-Default] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaTraceFlag",
        "Description":  "Returns Trace Flags that are enabled globally on each instance(s) of SQL Server as an object.",
        "Tags":  "TraceFlag",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "TraceFlag",
                           "Use this switch to filter to a specific Trace Flag.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Kevin Bullen (@sqlpadawan)",
        "Synopsis":  "Get global Trace Flag(s) information for each instance(s) of SQL Server.",
        "Name":  "Get-DbaTraceFlag",
        "Links":  "https://dbatools.io/Get-DbaTraceFlag",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaTraceFlag -SqlInstance localhost\nReturns all Trace Flag information on the local default SQL Server instance\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaTraceFlag -SqlInstance localhost, sql2016\nReturns all Trace Flag(s) for the local and sql2016 SQL Server instances\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaTraceFlag -SqlInstance localhost -TraceFlag 4199,3205\nReturns Trace Flag status for TF 4199 and 3205 for the local SQL Server instance if they are enabled.",
        "Syntax":  "Get-DbaTraceFlag [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-TraceFlag \u003cInt32[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaUptime",
        "Description":  "By default, this command returns for each SQL Server instance passed in:\nSQL Instance last startup time, Uptime as a PS TimeSpan, Uptime as a formatted string\nHosting Windows server last startup time, Uptime as a PS TimeSpan, Uptime as a formatted string",
        "Tags":  "CIM",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer,ComputerName",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to login to servers using SQL Logins instead of Windows Authentication (AKA Integrated or Trusted). To use:\n$scred = Get-Credential, then pass $scred object to the -SqlCredential parameter.\nWindows Authentication will be used if SqlCredential is not specified. SQL Server does not accept Windows credentials being passed as credentials.\nTo connect to SQL Server as a different Windows user, run PowerShell as that user.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Credential",
                           "Allows you to login to the computer (not SQL Server instance) using alternative Windows credentials.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Stuart Moore (@napalmgram), stuart-moore.com",
        "Synopsis":  "Returns the uptime of the SQL Server instance, and if required the hosting windows server",
        "Name":  "Get-DbaUptime",
        "Links":  "https://dbatools.io/Get-DbaUptime",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaUptime -SqlInstance SqlBox1\\Instance2\nReturns an object with SQL Server start time, uptime as TimeSpan object, uptime as a string, and Windows host boot time, host uptime as TimeSpan objects and host uptime as a string for the sqlexpress \r\ninstance on winserver\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaUptime -SqlInstance winserver\\sqlexpress, sql2016\nReturns an object with SQL Server start time, uptime as TimeSpan object, uptime as a string, and Windows host boot time, host uptime as TimeSpan objects and host uptime as a string for the sqlexpress \r\ninstance on host winserver  and the default instance on host sql2016\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaCmsRegServer -SqlInstance sql2014 | Get-DbaUptime\nReturns an object with SQL Server start time, uptime as TimeSpan object, uptime as a string, and Windows host boot time, host uptime as TimeSpan objects and host uptime as a string for every server \r\nlisted in the Central Management Server on sql2014",
        "Syntax":  "Get-DbaUptime [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Credential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaUserPermission",
        "Description":  "This command will display all server logins, server level securable, database logins and database securables.\n\nDISA STIG implementators will find this command useful as it uses Permissions.sql provided by DISA.\n\nNote that if you Ctrl-C out of this command and end it prematurely, it will leave behind a STIG schema in tempdb.",
        "Tags":  [
                     "Discovery",
                     "Permissions",
                     "Security"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer,SqlServers",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeSystemDatabase",
                           "Allows you to suppress output on system databases",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "IncludePublicGuest",
                           "Allows you to include output for public and guest grants.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "IncludeSystemObjects",
                           "Allows you to include output on sys schema objects.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Get-DbaUserLevelPermission",
        "Author":  "Brandon Abshire, netnerds.net",
        "Synopsis":  "Displays detailed permissions information for the server and database roles and securables.",
        "Name":  "Get-DbaUserPermission",
        "Links":  "https://dbatools.io/Get-DbaUserPermission",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaUserPermission -SqlInstance sql2008, sqlserver2012\nCheck server and database permissions for servers sql2008 and sqlserver2012.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaUserPermission -SqlInstance sql2008 -Database TestDB\nCheck server and database permissions on server sql2008 for only the TestDB database\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaUserPermission -SqlInstance sql2008 -Database TestDB -IncludePublicGuest -IncludeSystemObjects\nCheck server and database permissions on server sql2008 for only the TestDB database,\r\nincluding public and guest grants, and sys schema objects.",
        "Syntax":  "Get-DbaUserPermission [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Database \u003cObject[]\u003e] [-ExcludeDatabase \u003cObject[]\u003e] [[-ExcludeSystemDatabase]] [-IncludePublicGuest] [-IncludeSystemObjects] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaWaitingTask",
        "Description":  "This command is based on waiting task T-SQL script published by Paul Randal.\nReference: https://www.sqlskills.com/blogs/paul/updated-sys-dm_os_waiting_tasks-script-2/",
        "Tags":  [
                     "Waits",
                     "Task",
                     "WaitTask"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. Server version must be SQL Server version XXXX or higher.",
                           "ServerInstance,SqlServer,SqlServers",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Spid",
                           "Find the waiting task of one or more specific process ids",
                           "",
                           false,
                           "true (ByPropertyName)",
                           ""
                       ],
                       [
                           "IncludeSystemSpid",
                           "If this switch is enabled, the output will include the system sessions.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Shawn Melton (@wsmelton), https://wsmelton.github.io",
        "Synopsis":  "Displays waiting task.",
        "Name":  "Get-DbaWaitingTask",
        "Links":  "https://dbatools.io/Get-DbaWaitingTask",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaWaitingTask -SqlInstance sqlserver2014a\nReturns the waiting task for all sessions on sqlserver2014a\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaWaitingTask -SqlInstance sqlserver2014a -IncludeSystemSpid\nReturns the waiting task for all sessions (user and system) on sqlserver2014a",
        "Syntax":  "Get-DbaWaitingTask [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Spid \u003cObject[]\u003e] [-IncludeSystemSpid] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaWaitResource",
        "Description":  "Given a wait resource in the form of \u0027PAGE: 10:1:9180084\u0027 returns the database, data file and the system object which is being waited up.\n\nGiven a wait resource in the form of \u0027KEY: 7:35457594073541168 (de21f92a1572)\u0027, returns the database, object and index that is being waited on, With the -row switch the row data will also be returned.",
        "Tags":  [
                     "Pages",
                     "DBCC"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to login to servers using SQL Logins as opposed to Windows Auth/Integrated/Trusted.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "WaitResource",
                           "The wait resource value as supplied in sys.dm_exec_requests",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Row",
                           "If this switch provided also returns the value of the row being waited on with KEY wait resources",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "Replaces user friendly yellow warnings with bloody red exceptions of doom!\r\nUse this if you want the function to throw terminating errors you want to catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Stuart Moore (@napalmgram), stuart-moore.com",
        "Synopsis":  "Returns the resource being waited upon",
        "Name":  "Get-DbaWaitResource",
        "Links":  "https://dbatools.io/Get-DbaWaitResource",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaWaitResource -SqlInstance server1 -WaitResource \u0027PAGE: 10:1:9180084\u0027\nWill return an object containing; database name, data file name, schema name and the object which owns the resource\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaWaitResource -SqlInstance server2 -WaitResource \u0027KEY: 7:35457594073541168 (de21f92a1572)\u0027\nWill return an object containing; database name, schema name and index name which is being waited on.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaWaitResource -SqlInstance server2 -WaitResource \u0027KEY: 7:35457594073541168 (de21f92a1572)\u0027 -row\nWill return an object containing; database name, schema name and index name which is being waited on, and in addition the contents of the locked row at the time the command is run.",
        "Syntax":  "Get-DbaWaitResource [-SqlInstance] \u003cDbaInstanceParameter\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-WaitResource] \u003cString\u003e [-Row] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaWaitStatistic",
        "Description":  "This command is based off of Paul Randal\u0027s post \"Wait statistics, or please tell me where it hurts\"\n\nReturns:\nWaitType\nCategory\nWaitSeconds\nResourceSeconds\nSignalSeconds\nWaitCount\nPercentage\nAverageWaitSeconds\nAverageResourceSeconds\nAverageSignalSeconds\nURL\n\nReference: https://www.sqlskills.com/blogs/paul/wait-statistics-or-please-tell-me-where-it-hurts/",
        "Tags":  "WaitStatistic",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. Server version must be SQL Server version 2005 or higher.",
                           "ServerInstance,SqlServer,SqlServers",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Threshold",
                           "Threshold, in percentage of all waits on the system. Default per Paul\u0027s post is 95%.",
                           "",
                           false,
                           "false",
                           "95"
                       ],
                       [
                           "IncludeIgnorable",
                           "Some waits are no big deal and can be safely ignored in most circumstances. If you\u0027ve got weird issues with mirroring or AGs.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Displays wait statistics",
        "Name":  "Get-DbaWaitStatistic",
        "Links":  "https://dbatools.io/Get-DbaWaitStatistic",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaWaitStatistic -SqlInstance sql2008, sqlserver2012\nCheck wait statistics for servers sql2008 and sqlserver2012\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaWaitStatistic -SqlInstance sql2008 -Threshold 98 -IncludeIgnorable\nCheck wait statistics on server sql2008 for thresholds above 98% and include wait stats that are most often, but not always, ignorable\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaWaitStatistic -SqlInstance sql2008 | Select *\nShows detailed notes, if available, from Paul\u0027s post\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003e$output = Get-DbaWaitStatistic -SqlInstance sql2008 -Threshold 100 -IncludeIgnorable | Select-Object * | ConvertTo-DbaDataTable\nCollects all Wait Statistics (including ignorable waits) on server sql2008 into a Data Table.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003e$output = Get-DbaWaitStatistic -SqlInstance sql2008\nPS C:\\\u003e foreach ($row in ($output | Sort-Object -Unique Url)) { Start-Process ($row).Url }\nDisplays the output then loads the associated sqlskills website for each result. Opens one tab per unique URL.",
        "Syntax":  "Get-DbaWaitStatistic [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Threshold] \u003cInt32\u003e] [-IncludeIgnorable] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaWindowsLog",
        "Description":  "Gets Windows Application events associated with an instance",
        "Tags":  "Logging",
        "Params":  [
                       [
                           "SqlInstance",
                           "The instance(s) to retrieve the event logs from",
                           "ServerInstance,SqlServer",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Start",
                           "Default: 1970\r\nRetrieve all events starting from this timestamp.",
                           "",
                           false,
                           "false",
                           "1/1/1970 00:00:00"
                       ],
                       [
                           "End",
                           "Default: Now\r\nRetrieve all events that happened before this timestamp",
                           "",
                           false,
                           "false",
                           "(Get-Date)"
                       ],
                       [
                           "Credential",
                           "Credential to be used to connect to the Server. Note this is a Windows credential, as this command requires we communicate with the computer and not with the SQL instance.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "MaxThreads",
                           "Default: Unlimited\r\nThe maximum number of parallel threads used on the local computer.\r\nGiven that those will mostly be waiting for the remote system, there is usually no need to limit this.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "MaxRemoteThreads",
                           "Default: 2\r\nThe maximum number of parallel threads that are executed on the target sql server.\r\nThese processes will cause considerable CPU load, so a low limit is advisable in most scenarios.\r\nAny value lower than 1 disables the limit",
                           "",
                           false,
                           "false",
                           "2"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Drew Furgiuele | Friedrich Weinmann (@FredWeinmann)",
        "Synopsis":  "Gets Windows Application events associated with an instance",
        "Name":  "Get-DbaWindowsLog",
        "Links":  "https://dbatools.io/Get-DbaWindowsLog",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003e$ErrorLogs = Get-DbaWindowsLog -SqlInstance sql01\\sharepoint\nPS C:\\\u003e $ErrorLogs | Where-Object ErrorNumber -eq 18456\nReturns all lines in the errorlogs that have event number 18456 in them\nThis exists to ignore the Script Analyzer rule for Start-Runspace",
        "Syntax":  "Get-DbaWindowsLog [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-Start] \u003cDateTime\u003e] [[-End] \u003cDateTime\u003e] [[-Credential] \u003cPSCredential\u003e] [[-MaxThreads] \u003cInt32\u003e] [[-MaxRemoteThreads] \u003cInt32\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaWsfcAvailableDisk",
        "Description":  "Gets information about the disks that can support Failover Clustering and are visible to all nodes, but are not yet part of the set of clustered disks.\n\nAll Windows Server Failover Clustering (Wsfc) commands require local admin on each member node.",
        "Tags":  [
                     "Cluster",
                     "WSFC",
                     "FCI",
                     "HA"
                 ],
        "Params":  [
                       [
                           "ComputerName",
                           "The target cluster name. Can be a node or the cluster name itself.",
                           "",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Allows you to login to the cluster using alternative credentials.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Gets information about the disks that can support Failover Clustering and are visible to all nodes, but are not yet part of the set of clustered disks.",
        "Name":  "Get-DbaWsfcAvailableDisk",
        "Links":  "https://dbatools.io/Get-DbaWsfcAvailableDisk",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaWsfcAvailableDisk -ComputerName cluster01\nGets available disks from the failover cluster cluster01",
        "Syntax":  "Get-DbaWsfcAvailableDisk [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaWsfcCluster",
        "Description":  "Gets information about one or more failover clusters in a given domain.\n\nAll Windows Server Failover Clustering (Wsfc) commands require local admin on each member node.",
        "Tags":  [
                     "Cluster",
                     "WSFC",
                     "FCI",
                     "HA"
                 ],
        "Params":  [
                       [
                           "ComputerName",
                           "The target cluster name. Can be a node or the cluster name itself.",
                           "",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Allows you to login to the cluster using alternative credentials.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Gets information about one or more failover clusters in a given domain.",
        "Name":  "Get-DbaWsfcCluster",
        "Links":  "https://dbatools.io/Get-DbaWsfcCluster",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaWsfcCluster -ComputerName cluster01\nGets failover cluster information about cluster01\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaWsfcCluster -ComputerName cluster01 | Select *\nShows all cluster values, including the ones not shown in the default view",
        "Syntax":  "Get-DbaWsfcCluster [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaWsfcDisk",
        "Description":  "Gets information about the clustered disks on one or more failover clusters in a given domain.\n\nAll Windows Server Failover Clustering (Wsfc) commands require local admin on each member node.",
        "Tags":  [
                     "Cluster",
                     "WSFC",
                     "FCI",
                     "HA"
                 ],
        "Params":  [
                       [
                           "ComputerName",
                           "The target cluster name. Can be a node or the cluster name itself.",
                           "",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Allows you to login to the cluster using alternative credentials.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Gets information about the clustered disks on one or more failover clusters in a given domain.",
        "Name":  "Get-DbaWsfcDisk",
        "Links":  "https://dbatools.io/Get-DbaWsfcDisk",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaWsfcDisk -ComputerName cluster01\nGets disk information from the failover cluster cluster01",
        "Syntax":  "Get-DbaWsfcDisk [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaWsfcNetwork",
        "Description":  "Gets information about one or more networks in a failover cluster.\n\nAll Windows Server Failover Clustering (Wsfc) commands require local admin on each member node.",
        "Tags":  [
                     "Cluster",
                     "WSFC",
                     "FCI",
                     "HA"
                 ],
        "Params":  [
                       [
                           "ComputerName",
                           "The target cluster name. Can be a Network or the cluster name itself.",
                           "",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Allows you to login to the cluster using alternative credentials.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Gets information about one or more networks in a failover cluster.",
        "Name":  "Get-DbaWsfcNetwork",
        "Links":  "https://dbatools.io/Get-DbaWsfcNetwork",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaWsfcNetwork -ComputerName cluster01\nGets network information from the failover cluster cluster01",
        "Syntax":  "Get-DbaWsfcNetwork [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaWsfcNetworkInterface",
        "Description":  "Gets information about one or more network adapters in a failover cluster.\n\nAll Windows Server Failover Clustering (Wsfc) commands require local admin on each member node.",
        "Tags":  [
                     "Cluster",
                     "WSFC",
                     "FCI",
                     "HA"
                 ],
        "Params":  [
                       [
                           "ComputerName",
                           "The target cluster name. Can be a Network or the cluster name itself.",
                           "",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Allows you to login to the cluster using alternative credentials.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Gets information about one or more network adapters in a failover cluster.",
        "Name":  "Get-DbaWsfcNetworkInterface",
        "Links":  "https://dbatools.io/Get-DbaWsfcNetworkInterface",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaWsfcNetworkInterface -ComputerName cluster01\nGets network interface information from the failover cluster cluster01\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaWsfcNetworkInterface -ComputerName cluster01 | Select *\nShows all network interface  values, including the ones not shown in the default view",
        "Syntax":  "Get-DbaWsfcNetworkInterface [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaWsfcNode",
        "Description":  "Gets information about one or more nodes, or servers, in a failover cluster.\n\nAll Windows Server Failover Clustering (Wsfc) commands require local admin on each member node.",
        "Tags":  [
                     "Cluster",
                     "WSFC",
                     "FCI",
                     "HA"
                 ],
        "Params":  [
                       [
                           "ComputerName",
                           "The target cluster name. Can be a node or the cluster name itself.",
                           "",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Allows you to login to the cluster using alternative credentials.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Gets information about one or more nodes, or servers, in a failover cluster.",
        "Name":  "Get-DbaWsfcNode",
        "Links":  "https://dbatools.io/Get-DbaWsfcNode",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaWsfcNode -ComputerName cluster01\nGets node information from the failover cluster cluster01\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaWsfcNode -ComputerName cluster01 | Select-Object *\nShows all node values, including the ones not shown in the default view",
        "Syntax":  "Get-DbaWsfcNode [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaWsfcResource",
        "Description":  "Gets information about one or more resources in a failover cluster.\n\nAll Windows Server Failover Clustering (Wsfc) commands require local admin on each member node.",
        "Tags":  [
                     "Cluster",
                     "WSFC",
                     "FCI",
                     "HA"
                 ],
        "Params":  [
                       [
                           "ComputerName",
                           "The target cluster name. Can be a node or the cluster name itself.",
                           "",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Allows you to login to the cluster using alternative credentials.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Gets information about one or more resources in a failover cluster.",
        "Name":  "Get-DbaWsfcResource",
        "Links":  "https://dbatools.io/Get-DbaWsfcResource",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaWsfcResource -ComputerName cluster01\nGets resource information from the failover cluster cluster01\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaWsfcResource -ComputerName cluster01 | Select *\nShows all resource values, including the ones not shown in the default view",
        "Syntax":  "Get-DbaWsfcResource [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaWsfcResourceType",
        "Description":  "Gets information about one or more resource types in a failover cluster.\n\nAll Windows Server Failover Clustering (Wsfc) commands require local admin on each member node.",
        "Tags":  [
                     "Cluster",
                     "WSFC",
                     "FCI",
                     "HA"
                 ],
        "Params":  [
                       [
                           "ComputerName",
                           "The target cluster name. Can be a node or the cluster name itself.",
                           "",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Allows you to login to the cluster using alternative credentials.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Gets information about one or more resource types in a failover cluster.",
        "Name":  "Get-DbaWsfcResourceType",
        "Links":  "https://dbatools.io/Get-DbaWsfcResourceType",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaWsfcResourceType -ComputerName cluster01\nGets resource type information from the failover cluster cluster01",
        "Syntax":  "Get-DbaWsfcResourceType [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaWsfcRole",
        "Description":  "Gets information about one or more clustered roles (resource groups) in a failover cluster.\n\nAll Windows Server Failover Clustering (Wsfc) commands require local admin on each member node.",
        "Tags":  [
                     "Cluster",
                     "WSFC",
                     "FCI",
                     "HA"
                 ],
        "Params":  [
                       [
                           "ComputerName",
                           "The target cluster name. Can be a Role or the cluster name itself.",
                           "",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Allows you to login to the cluster using alternative credentials.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Gets information about one or more clustered roles (resource groups) in a failover cluster.",
        "Name":  "Get-DbaWsfcRole",
        "Links":  "https://dbatools.io/Get-DbaWsfcRole",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaWsfcRole -ComputerName cluster01\nGets role information from the failover cluster cluster01\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaWsfcRole -ComputerName cluster01 | Select *\nShows all role values, including the ones not shown in the default view",
        "Syntax":  "Get-DbaWsfcRole [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaWsfcSharedVolume",
        "Description":  "Gets information about Cluster Shared Volumes in a failover cluster.\n\nAll Windows Server Failover Clustering (Wsfc) commands require local admin on each member node.",
        "Tags":  [
                     "Cluster",
                     "WSFC",
                     "FCI",
                     "HA"
                 ],
        "Params":  [
                       [
                           "ComputerName",
                           "The target cluster name. Can be a node or the cluster name itself.",
                           "",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Allows you to login to the cluster using alternative credentials.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Gets information about Cluster Shared Volumes in a failover cluster.",
        "Name":  "Get-DbaWsfcSharedVolume",
        "Links":  "https://dbatools.io/Get-DbaWsfcSharedVolume",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaWsfcSharedVolume -ComputerName cluster01\nGets shared volume (CSV) information from the failover cluster cluster01",
        "Syntax":  "Get-DbaWsfcSharedVolume [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaXEObject",
        "Description":  "This function returns a list of extended events objects exposed by event packages from specified SQL Server instance(s).",
        "Tags":  [
                     "ExtendedEvent",
                     "XE",
                     "XEvent"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2008 or higher.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Type",
                           "Used to specify the type. Valid types include:\nAction\r\nEvent\r\nMap\r\nMessage\r\nPredicateComparator\r\nPredicateSource\r\nTarget\r\nType",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message. This avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because \r\nit basically disables advanced scripting. Using this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Gets a list of extended events objects exposed by event packages from specified SQL Server instance(s).",
        "Name":  "Get-DbaXEObject",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaXEObject -SqlInstance sql2016\nLists all the XE Objects on the sql2016 SQL Server.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaXEObject -SqlInstance sql2017 -Type Action, Event\nLists all the XE Objects of type Action and Event on the sql2017 SQL Server.",
        "Syntax":  "Get-DbaXEObject [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Type \u003cString[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaXESession",
        "Description":  "Retrieves a list of Extended Events Sessions present on the specified SQL Server instance(s).",
        "Tags":  [
                     "ExtendedEvent",
                     "XE",
                     "XEvent"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2008 or higher.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Session",
                           "Only return specific sessions. Options for this parameter are auto-populated from the server.",
                           "Sessions",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Get-DbaXEventSession",
        "Author":  "Klaas Vandenberghe (@PowerDBAKlaas)",
        "Synopsis":  "Gets a list of Extended Events Sessions from the specified SQL Server instance(s).",
        "Name":  "Get-DbaXESession",
        "Links":  "https://dbatools.io/Get-DbaXESession",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaXESession -SqlInstance ServerA\\sql987\nReturns a custom object with ComputerName, SQLInstance, Session, StartTime, Status and other properties.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaXESession -SqlInstance ServerA\\sql987 | Format-Table ComputerName, SqlInstance, Session, Status -AutoSize\nReturns a formatted table displaying ComputerName, SqlInstance, Session, and Status.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003e\u0027ServerA\\sql987\u0027,\u0027ServerB\u0027 | Get-DbaXESession\nReturns a custom object with ComputerName, SqlInstance, Session, StartTime, Status and other properties, from multiple SQL instances.",
        "Syntax":  "Get-DbaXESession [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Session] \u003cObject[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaXESessionTarget",
        "Description":  "Retrieves a list of Extended Events Session Targets from the specified SQL Server instance(s).",
        "Tags":  [
                     "ExtendedEvent",
                     "XE",
                     "XEvent"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2008 or higher.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Session",
                           "Only return a specific session. Options for this parameter are auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Target",
                           "Only return a specific target.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Specifies an XE session returned by Get-DbaXESession to search.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Get-DbaXEventSessionTarget",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Get a list of Extended Events Session Targets from the specified SQL Server instance(s).",
        "Name":  "Get-DbaXESessionTarget",
        "Links":  "https://dbatools.io/Get-DbaXESessionTarget",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaXESessionTarget -SqlInstance ServerA\\sql987 -Session system_health\nShows targets for the system_health session on ServerA\\sql987.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaXESession -SqlInstance sql2016 -Session system_health | Get-DbaXESessionTarget\nReturns the targets for the system_health session on sql2016.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaXESession -SqlInstance sql2016 -Session system_health | Get-DbaXESessionTarget -Target package0.event_file\nReturn only the package0.event_file target for the system_health session on sql2016.",
        "Syntax":  "Get-DbaXESessionTarget [-SqlCredential \u003cPSCredential\u003e] [-Session \u003cString[]\u003e] [-Target \u003cString[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]\nGet-DbaXESessionTarget -SqlInstance \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Session \u003cString[]\u003e] [-Target \u003cString[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]\nGet-DbaXESessionTarget [-SqlCredential \u003cPSCredential\u003e] [-Session \u003cString[]\u003e] [-Target \u003cString[]\u003e] -InputObject \u003cSession[]\u003e [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaXESessionTemplate",
        "Description":  "Parses Extended Event XML templates. Defaults to parsing templates in the dbatools template repository (\\bin\\xetemplates\\).\n\nThe default repository contains templates from:\nMicrosoft\u0027s Templates that come with SSMS\nJes Borland\u0027s \"Everyday Extended Events\" presentation and GitHub repository (https://github.com/grrlgeek/extended-events)\nChristian Grafe (@ChrGraefe) XE Repo: https://github.com/chrgraefe/sqlscripts/blob/master/XE-Events/\nErin Stellato\u0027s Blog: https://www.sqlskills.com/blogs/erin/\n\nSome profile templates converted using:\nsp_SQLskills_ConvertTraceToExtendedEvents.sql\nJonathan M. Kehayias, SQLskills.com\nhttp://sqlskills.com/blogs/jonathan",
        "Tags":  [
                     "ExtendedEvent",
                     "XE",
                     "XEvent"
                 ],
        "Params":  [
                       [
                           "Path",
                           "The path to the template directory. Defaults to the dbatools template repository (\\bin\\xetemplates\\).",
                           "",
                           false,
                           "false",
                           "\"$script:PSModuleRoot\\bin\\xetemplates\""
                       ],
                       [
                           "Pattern",
                           "Specify a pattern for filtering. Alternatively, you can use Out-GridView -Passthru to select objects and pipe them to Import-DbaXESessionTemplate",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Template",
                           "Specifies one or more of the templates provided by dbatools. Press tab to cycle through the list of options.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Parses Extended Event XML templates. Defaults to parsing templates in the dbatools template repository (\\bin\\xetemplates\\).",
        "Name":  "Get-DbaXESessionTemplate",
        "Links":  "https://dbatools.io/Get-DbaXESessionTemplate",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaXESessionTemplate\nReturns information about all the templates in the local dbatools repository.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaXESessionTemplate | Out-GridView -PassThru | Import-DbaXESessionTemplate -SqlInstance sql2017 | Start-DbaXESession\nAllows you to select a Session template, then import it to the specified instance and start the session.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaXESessionTemplate -Path \"$home\\Documents\\SQL Server Management Studio\\Templates\\XEventTemplates\"\nReturns information about all the templates in your local XEventTemplates repository.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaXESessionTemplate -Pattern duration\nReturns information about all the templates that match the word \"duration\" in the title, category or body.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eGet-DbaXESessionTemplate | Select-Object *\nReturns more information about the template, including the full path/filename.",
        "Syntax":  "Get-DbaXESessionTemplate [[-Path] \u003cString[]\u003e] [[-Pattern] \u003cString\u003e] [[-Template] \u003cString[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaXESmartTarget",
        "Description":  "Gets an XESmartTarget PowerShell job created by Start-DbaXESmartTarget.",
        "Tags":  [
                     "ExtendedEvent",
                     "XE",
                     "XEvent"
                 ],
        "Params":  [
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl) | SmartTarget by Gianluca Sartori (@spaghettidba)",
        "Synopsis":  "Gets an XESmartTarget PowerShell job created by Start-DbaXESmartTarget.",
        "Name":  "Get-DbaXESmartTarget",
        "Links":  "https://dbatools.io/Get-DbaXESmartTarget",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaXESmartTarget\nGets an XESmartTarget PowerShell Job created by Start-DbaXESmartTarget.",
        "Syntax":  "Get-DbaXESmartTarget [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Get-DbaXEStore",
        "Description":  "Get a Extended Events store",
        "Tags":  [
                     "ExtendedEvent",
                     "XE",
                     "XEvent"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2008 or higher.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Get a Extended Events store",
        "Name":  "Get-DbaXEStore",
        "Links":  "https://dbatools.io/Get-DbaXEStore",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaXEStore -SqlInstance ServerA\\sql987\nReturns an XEvent Store.",
        "Syntax":  "Get-DbaXEStore [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Grant-DbaAgPermission",
        "Description":  "Grants endpoint and availability group permissions to a login. If the account is a Windows login and does not exist, it will be automatically added.",
        "Tags":  [
                     "AvailabilityGroup",
                     "HA",
                     "AG"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Login",
                           "The login or logins to modify.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AvailabilityGroup",
                           "Only modify specific availability groups.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Type",
                           "Specify type: Endpoint or AvailabilityGroup. Endpoint will modify the DatabaseMirror endpoint type.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "Permission",
                           "Grants one or more permissions:\r\n    Alter\r\n    Connect\r\n    Control\r\n    CreateSequence\r\n    CreateAnyDatabase\r\n    Delete\r\n    Execute\r\n    Impersonate\r\n    Insert\r\n    Receive\r\n    References\r\n    Select\r\n    Send\r\n    TakeOwnership\r\n    Update\r\n    ViewChangeTracking\r\n    ViewDefinition\n    CreateAnyDatabase\nConnect is default.",
                           "",
                           false,
                           "false",
                           "Connect"
                       ],
                       [
                           "InputObject",
                           "Enables piping from Get-DbaLogin.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Grants endpoint and availability group permissions to a login.",
        "Name":  "Grant-DbaAgPermission",
        "Links":  "https://dbatools.io/Grant-DbaAgPermission",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGrant-DbaAgPermission -SqlInstance sql2017a -Type AvailabilityGroup -AvailabilityGroup SharePoint -Login ad\\spservice -Permission CreateAnyDatabase\nAdds CreateAnyDatabase permissions to ad\\spservice on the SharePoint availability group on sql2017a. Does not prompt for confirmation.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGrant-DbaAgPermission -SqlInstance sql2017a -Type AvailabilityGroup -AvailabilityGroup ag1, ag2 -Login ad\\spservice -Permission CreateAnyDatabase -Confirm\nAdds CreateAnyDatabase permissions to ad\\spservice on the ag1 and ag2 availability groups on sql2017a. Prompts for confirmation.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaLogin -SqlInstance sql2017a | Out-GridView -Passthru | Grant-DbaAgPermission -Type EndPoint\nGrants the selected logins Connect permissions on the DatabaseMirroring endpoint for sql2017a",
        "Syntax":  "Grant-DbaAgPermission [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Login] \u003cString[]\u003e] [[-AvailabilityGroup] \u003cString[]\u003e] [-Type] \u003cString[]\u003e [[-Permission] \u003cString[]\u003e] [[-InputObject] \u003cLogin[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Import-DbaCmsRegServer",
        "Description":  "Imports registered servers and registered server groups to SQL Server Central Management Server (CMS)",
        "Tags":  [
                     "RegisteredServer",
                     "CMS"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Path",
                           "Optional path to exported reg server XML",
                           "FullName",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Enables piping from Get-DbaCmsRegServer, Get-DbaCmsRegServerGroup, CSVs and other objects.\nIf importing from CSV or other object, a column named ServerName is required. Optional columns include Name, Description and Group.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Group",
                           "Imports to specific group",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Import-DbaRegisteredServer",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Imports registered servers and registered server groups to SQL Server Central Management Server (CMS)",
        "Name":  "Import-DbaCmsRegServer",
        "Links":  "https://dbatools.io/Import-DbaCmsRegServer",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eImport-DbaCmsRegServer -SqlInstance sql2012 -Path C:\\temp\\corp-regservers.xml\nImports C:\\temp\\corp-regservers.xml to the CMS on sql2012\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eImport-DbaCmsRegServer -SqlInstance sql2008 -Group hr\\Seattle -Path C:\\temp\\Seattle.xml\nImports C:\\temp\\Seattle.xml to Seattle subgroup within the hr group on sql2008\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaCmsRegServer -SqlInstance sql2008, sql2012 | Import-DbaCmsRegServer -SqlInstance sql2017\nImports all registered servers from sql2008 and sql2012 to sql2017\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaCmsRegServerGroup -SqlInstance sql2008 -Group hr\\Seattle | Import-DbaCmsRegServer -SqlInstance sql2017 -Group Seattle\nImports all registered servers from the hr\\Seattle group on sql2008 to the Seattle group on sql2017",
        "Syntax":  "Import-DbaCmsRegServer [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Path] \u003cString[]\u003e] [[-InputObject] \u003cObject[]\u003e] [[-Group] \u003cObject\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Import-DbaCsv",
        "Description":  "Import-DbaCsv takes advantage of .NET\u0027s super fast SqlBulkCopy class to import CSV files into SQL Server.\n\nThe entire import is performed within a transaction, so if a failure occurs or the script is aborted, no changes will persist.\n\nIf the table or view specified does not exist and -AutoCreateTable, it will be automatically created using slow and efficient but accomodating data types.",
        "Tags":  [
                     "Migration",
                     "Import"
                 ],
        "Params":  [
                       [
                           "Path",
                           "Specifies path to the CSV file(s) to be imported. Multiple files may be imported at once.",
                           "Csv,FullPath",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlInstance",
                           "The SQL Server Instance to import data into.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Specifies the name of the database the CSV will be imported into. Options for this this parameter are  auto-populated from the server.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "Table",
                           "Specifies the SQL table or view where CSV will be imported into.\nIf a table name is not specified, the table name will be automatically determined from the filename.\nIf the table specified does not exist and -AutoCreateTable, it will be automatically created using slow and efficient but accomodating data types.\nIf the automatically generated table datatypes do not work for you, please create the table prior to import.\nIf you want to import specific columns from a CSV, create a view with corresponding columns.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Schema",
                           "Specifies the schema in which the SQL table or view where CSV will be imported into resides. Default is dbo\nIf a schema name is not specified, and a CSV name with multiple dots is specified (ie; something.data.csv) then this will be interpreted as a request to import into a table [data] in the schema \r\n[something].\nIf a schema does not currently exist, it will be created, after a prompt to confirm this. Authorization will be set to dbo by default",
                           "",
                           false,
                           "false",
                           "dbo"
                       ],
                       [
                           "Truncate",
                           "If this switch is enabled, the destination table will be truncated prior to import.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Delimiter",
                           "Specifies the delimiter used in the imported file(s). If no delimiter is specified, comma is assumed.\nValid delimiters are \u0027`t`, \u0027|\u0027, \u0027;\u0027,\u0027 \u0027 and \u0027,\u0027 (tab, pipe, semicolon, space, and comma).",
                           "",
                           false,
                           "false",
                           ","
                       ],
                       [
                           "SingleColumn",
                           "Specifies that the file contains a single column of data. Otherwise, the delimiter check bombs.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "BatchSize",
                           "Specifies the batch size for the import. Defaults to 50000.",
                           "",
                           false,
                           "false",
                           "50000"
                       ],
                       [
                           "NotifyAfter",
                           "Specifies the import row count interval for reporting progress. A notification will be shown after each group of this many rows has been imported.",
                           "",
                           false,
                           "false",
                           "50000"
                       ],
                       [
                           "TableLock",
                           "If this switch is enabled, the SqlBulkCopy option to acquire a table lock will be used. This is automatically used if -Turbo is enabled.\nPer Microsoft \"Obtain a bulk update lock for the duration of the bulk copy operation. When not\r\nspecified, row locks are used.\"",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "CheckConstraints",
                           "If this switch is enabled, the SqlBulkCopy option to check constraints will be used.\nPer Microsoft \"Check constraints while data is being inserted. By default, constraints are not checked.\"",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "FireTriggers",
                           "If this switch is enabled, the SqlBulkCopy option to allow insert triggers to be executed will be used.\nPer Microsoft \"When specified, cause the server to fire the insert triggers for the rows being inserted into the database.\"",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "KeepIdentity",
                           "If this switch is enabled, the SqlBulkCopy option to keep identity values from the source will be used.\nPer Microsoft \"Preserve source identity values. When not specified, identity values are assigned by the destination.\"",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "KeepNulls",
                           "If this switch is enabled, the SqlBulkCopy option to keep NULL values in the table will be used.\nPer Microsoft \"Preserve null values in the destination table regardless of the settings for default values. When not specified, null values are replaced by default values where applicable.\"",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Column",
                           "Import only specific columns. To remap column names, use the ColumnMap.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ColumnMap",
                           "By default, the bulk copy tries to automap columns. When it doesn\u0027t work as desired, this parameter will help. Check out the examples for more information.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AutoCreateTable",
                           "Creates a table if it does not already exist. The table will be created with sub-optimal data types such as nvarchar(max)",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "NoProgress",
                           "The progress bar is pretty but can slow down imports. Use this parameter to quietly import.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "NoHeaderRow",
                           "By default, the first row is used to determine column names for the data being imported.\nUse this switch if the first row contains data and not column names.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Import-DbaCsvToSql",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Efficiently imports very large (and small) CSV files into SQL Server.",
        "Name":  "Import-DbaCsv",
        "Links":  "https://dbatools.io/Import-DbaCsv",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eImport-DbaCsv -Path C:\\temp\\housing.csv -SqlInstance sql001 -Database markets\nImports the entire comma-delimited housing.csv to the SQL \"markets\" database on a SQL Server named sql001, using the first row as column names.\nSince a table name was not specified, the table name is automatically determined from filename as \"housing\".\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eImport-DbaCsv -Path .\\housing.csv -SqlInstance sql001 -Database markets -Table housing -Delimiter \"`t\" -NoHeaderRow\nImports the entire comma-delimited housing.csv, including the first row which is not used for colum names, to the SQL markets database, into the housing table, on a SQL Server named sql001.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eImport-DbaCsv -Path C:\\temp\\huge.txt -SqlInstance sqlcluster -Database locations -Table latitudes -Delimiter \"|\"\nImports the entire pipe-delimited huge.txt to the locations database, into the latitudes table on a SQL Server named sqlcluster.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eImport-DbaCsv -Path c:\\temp\\SingleColumn.csv -SqlInstance sql001 -Database markets -Table TempTable -SingleColumn\nImports the single column CSV into TempTable\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eGet-ChildItem -Path \\\\FileServer\\csvs | Import-DbaCsv -SqlInstance sql001, sql002 -Database tempdb -AutoCreateTable\nImports every CSV in the \\\\FileServer\\csvs path into both sql001 and sql002\u0027s tempdb database. Each CSV will be imported into an automatically determined table name.\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eGet-ChildItem -Path \\\\FileServer\\csvs | Import-DbaCsv -SqlInstance sql001, sql002 -Database tempdb -AutoCreateTable -WhatIf\nShows what would happen if the command were to be executed\n-------------------------- EXAMPLE 7 --------------------------\nPS C:\\\u003eImport-DbaCsv -Path c:\\temp\\dataset.csv -SqlInstance sql2016 -Database tempdb -Column Name, Address, Mobile\nImport only Name, Address and Mobile even if other columns exist. All other columns are ignored and therefore null or default values.\n-------------------------- EXAMPLE 8 --------------------------\nPS C:\\\u003e$columns = @{\n\u003e\u003e Text = \u0027FirstName\u0027\r\n\u003e\u003e Number = \u0027PhoneNumber\u0027\r\n\u003e\u003e }\r\nPS C:\\\u003e Import-DbaCsv -Path c:\\temp\\supersmall.csv -SqlInstance sql2016 -Database tempdb -ColumnMap $columns\nThe CSV column \u0027Text\u0027 is inserted into SQL column \u0027FirstName\u0027 and CSV column Number is inserted into the SQL Column \u0027PhoneNumber\u0027. All other columns are ignored and therefore null or default values.",
        "Syntax":  "Import-DbaCsv [[-Path] \u003cObject[]\u003e] [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-Database] \u003cString\u003e [[-Table] \u003cString\u003e] [[-Schema] \u003cString\u003e] [-Truncate] [[-Delimiter] \u003cString\u003e] [-SingleColumn] [[-BatchSize] \u003cInt32\u003e] [[-NotifyAfter] \u003cInt32\u003e] [-TableLock] [-CheckConstraints] [-FireTriggers] [-KeepIdentity] [-KeepNulls] [[-Column] \u003cString[]\u003e] [[-ColumnMap] \u003cHashtable[]\u003e] [-AutoCreateTable] [-NoProgress] [-NoHeaderRow] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Import-DbaPfDataCollectorSetTemplate",
        "Description":  "Imports a new Performance Monitor Data Collector Set Template either from the dbatools repository or a file you specify.\nWhen importing data collector sets from the local instance, Run As Admin is required.\n\nNote: The included counters will be added for all SQL instances on the machine by default.\nFor specific instances in addition to the default, use -Instance.\n\nSee https://msdn.microsoft.com/en-us/library/windows/desktop/aa371952 for more information",
        "Tags":  [
                     "Performance",
                     "DataCollector",
                     "PerfCounter"
                 ],
        "Params":  [
                       [
                           "ComputerName",
                           "The target computer. Defaults to localhost.",
                           "",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Allows you to login to servers using alternative credentials. To use:\n$scred = Get-Credential, then pass $scred object to the -Credential parameter.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "DisplayName",
                           "Sets the display name of the data collector set.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SchedulesEnabled",
                           "If this switch is enabled, sets a value that indicates whether the schedules are enabled.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "RootPath",
                           "Sets the base path where the subdirectories are created.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Segment",
                           "Sets a value that indicates whether PLA creates new logs if the maximum size or segment duration is reached before the data collector set is stopped.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "SegmentMaxDuration",
                           "Sets the duration that the data collector set can run before it begins writing to new log files.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "SegmentMaxSize",
                           "Sets the maximum size of any log file in the data collector set.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "Subdirectory",
                           "Sets a base subdirectory of the root path where the next instance of the data collector set will write its logs.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SubdirectoryFormat",
                           "Sets flags that describe how to decorate the subdirectory name. PLA appends the decoration to the folder name. For example, if you specify plaMonthDayHour, PLA appends the current month, day, and \r\nhour values to the folder name. If the folder name is MyFile, the result could be MyFile110816.",
                           "",
                           false,
                           "false",
                           "3"
                       ],
                       [
                           "SubdirectoryFormatPattern",
                           "Sets a format pattern to use when decorating the folder name. Default is \u0027yyyyMMdd\\-NNNNNN\u0027.",
                           "",
                           false,
                           "false",
                           "yyyyMMdd\\-NNNNNN"
                       ],
                       [
                           "Task",
                           "Sets the name of a Task Scheduler job to start each time the data collector set stops, including between segments.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "TaskRunAsSelf",
                           "If this switch is enabled, sets a value that determines whether the task runs as the data collector set user or as the user specified in the task.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "TaskArguments",
                           "Sets the command-line arguments to pass to the Task Scheduler job specified in the IDataCollectorSet::Task property.\r\nSee https://msdn.microsoft.com/en-us/library/windows/desktop/aa371992 for more information.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "TaskUserTextArguments",
                           "Sets the command-line arguments that are substituted for the {usertext} substitution variable in the IDataCollectorSet::TaskArguments property.\r\nSee https://msdn.microsoft.com/en-us/library/windows/desktop/aa371993 for more information.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "StopOnCompletion",
                           "If this switch is enabled, sets a value that determines whether the data collector set stops when all the data collectors in the set are in a completed state.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Path",
                           "The path to the xml file or files.",
                           "FullName",
                           false,
                           "true (ByPropertyName)",
                           ""
                       ],
                       [
                           "Template",
                           "From one or more of the templates from the dbatools repository. Press Tab to cycle through the available options.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Instance",
                           "By default, the template will be applied to all instances. If you want to set specific ones in addition to the default, supply just the instance name.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Imports a new Performance Monitor Data Collector Set Template either from the dbatools repository or a file you specify.",
        "Name":  "Import-DbaPfDataCollectorSetTemplate",
        "Links":  "https://dbatools.io/Import-DbaPfDataCollectorSetTemplate",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eImport-DbaPfDataCollectorSetTemplate -ComputerName sql2017 -Template \u0027Long Running Query\u0027\nCreates a new data collector set named \u0027Long Running Query\u0027 from the dbatools repository on the SQL Server sql2017.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eImport-DbaPfDataCollectorSetTemplate -ComputerName sql2017 -Template \u0027Long Running Query\u0027 -DisplayName \u0027New Long running query\u0027 -Confirm\nCreates a new data collector set named \"New Long Running Query\" using the \u0027Long Running Query\u0027 template. Forces a confirmation if the template exists.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaPfDataCollectorSet -ComputerName sql2017 -Session db_ola_health | Remove-DbaPfDataCollectorSet\nImport-DbaPfDataCollectorSetTemplate -ComputerName sql2017 -Template db_ola_health | Start-DbaPfDataCollectorSet\nImports a session if it exists, then recreates it using a template.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaPfDataCollectorSetTemplate | Out-GridView -PassThru | Import-DbaPfDataCollectorSetTemplate -ComputerName sql2017\nAllows you to select a Session template then import to an instance named sql2017.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eImport-DbaPfDataCollectorSetTemplate -ComputerName sql2017 -Template \u0027Long Running Query\u0027 -Instance SHAREPOINT\nCreates a new data collector set named \u0027Long Running Query\u0027 from the dbatools repository on the SQL Server sql2017 for both the default and the SHAREPOINT instance.\nIf you\u0027d like to remove counters for the default instance, use Remove-DbaPfDataCollectorCounter.",
        "Syntax":  "Import-DbaPfDataCollectorSetTemplate [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [[-DisplayName] \u003cString\u003e] [-SchedulesEnabled] [[-RootPath] \u003cString\u003e] [-Segment] [[-SegmentMaxDuration] \u003cInt32\u003e] [[-SegmentMaxSize] \u003cInt32\u003e] [[-Subdirectory] \u003cString\u003e] [[-SubdirectoryFormat] \u003cInt32\u003e] [[-SubdirectoryFormatPattern] \u003cString\u003e] [[-Task] \u003cString\u003e] [-TaskRunAsSelf] [[-TaskArguments] \u003cString\u003e] [[-TaskUserTextArguments] \u003cString\u003e] [-StopOnCompletion] [[-Path] \u003cString[]\u003e] [[-Template] \u003cString[]\u003e] [[-Instance] \u003cString[]\u003e] [-EnableException] [-WhatIf] [-Confirm] \r\n[\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Import-DbaSpConfigure",
        "Description":  "Updates sp_configure settings on destination server.",
        "Tags":  [
                     "SpConfig",
                     "Configure",
                     "Configuration"
                 ],
        "Params":  [
                       [
                           "Source",
                           "Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Destination",
                           "Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SourceSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "DestinationSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlInstance",
                           "Specifies a SQL Server instance to set up sp_configure values on using a SQL file.",
                           "ServerInstance,SqlServer",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Path",
                           "Specifies the path to a SQL script file holding sp_configure queries for each of the settings to be changed. Export-DbaSPConfigure creates a suitable file as its output.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Use this SQL credential if you are setting up sp_configure values from a SQL file.\nLogin to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Force",
                           "If this switch is enabled, no version check between Source and Destination is performed. By default, the major and minor versions of Source and Destination must match when copying sp_configure \r\nsettings.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Import-SqlSpConfigure",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Updates sp_configure settings on destination server.",
        "Name":  "Import-DbaSpConfigure",
        "Links":  "https://dbatools.io/Import-DbaSpConfigure",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eImport-DbaSpConfigure -Source sqlserver -Destination sqlcluster\nImports the sp_configure settings from the source server sqlserver and sets them on the sqlcluster server using Windows Authentication\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eImport-DbaSpConfigure -Source sqlserver -Destination sqlcluster -Force\nImports the sp_configure settings from the source server sqlserver and sets them on the sqlcluster server using Windows Authentication. Will not do a version check between Source and Destination\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eImport-DbaSpConfigure -Source sqlserver -Destination sqlcluster -SourceSqlCredential $SourceSqlCredential -DestinationSqlCredential $DestinationSqlCredential\nImports the sp_configure settings from the source server sqlserver and sets them on the sqlcluster server using the SQL credentials stored in the variables $SourceSqlCredential and \r\n$DestinationSqlCredential\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eImport-DbaSpConfigure -SqlInstance sqlserver -Path .\\spconfig.sql -SqlCredential $SqlCredential\nImports the sp_configure settings from the file .\\spconfig.sql and sets them on the sqlserver server using the SQL credential stored in the variable $SqlCredential",
        "Syntax":  "Import-DbaSpConfigure [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nImport-DbaSpConfigure [-Source \u003cDbaInstanceParameter\u003e] [-Destination \u003cDbaInstanceParameter\u003e] [-SourceSqlCredential \u003cPSCredential\u003e] [-DestinationSqlCredential \u003cPSCredential\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nImport-DbaSpConfigure [-SqlInstance \u003cDbaInstanceParameter\u003e] [-Path \u003cString\u003e] [-SqlCredential \u003cPSCredential\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Import-DbatoolsConfig",
        "Description":  "Imports a json configuration file into the configuration system.",
        "Params":  [
                       [
                           "Path",
                           "The path to the json file to import.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "ModuleName",
                           "Import configuration items specific to a module from the default configuration paths.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "ModuleVersion",
                           "The configuration version of the module-settings to load.",
                           "",
                           false,
                           "false",
                           "1"
                       ],
                       [
                           "Scope",
                           "Where to import the module specific configuration items form.\r\nOnly file-based scopes are supported for this.\r\nBy default, all locations are queried, with user settings beating system settings.",
                           "",
                           false,
                           "false",
                           "FileUserLocal, FileUserShared, FileSystem"
                       ],
                       [
                           "IncludeFilter",
                           "If specified, only elements with names that are similar (-like) to names in this list will be imported.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeFilter",
                           "Elements that are similar (-like) to names in this list will not be imported.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Peek",
                           "Rather than applying the setting, return the configuration items that would have been applied.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "This parameters disables user-friendly warnings and enables the throwing of exceptions.\r\nThis is less user friendly, but allows catching exceptions in calling scripts.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Synopsis":  "Imports a json configuration file into the configuration system.",
        "Name":  "Import-DbatoolsConfig",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eImport-DbatoolsConfig -Path \u0027.\\config.json\u0027\nImports the configuration stored in \u0027.\\config.json\u0027\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eImport-DbatoolsConfig -ModuleName message\nImports all the module specific settings that have been persisted in any of the default file system paths.",
        "Syntax":  "Import-DbatoolsConfig -Path \u003cString[]\u003e [-IncludeFilter \u003cString[]\u003e] [-ExcludeFilter \u003cString[]\u003e] [-Peek] [-EnableException] [\u003cCommonParameters\u003e]\nImport-DbatoolsConfig -ModuleName \u003cString\u003e [-ModuleVersion \u003cInt32\u003e] [-Scope {UserDefault | UserMandatory | SystemDefault | SystemMandatory | FileUserLocal | FileUserShared | FileSystem}] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Import-DbaXESessionTemplate",
        "Description":  "Imports a new XESession XML Template either from the dbatools repository or a file you specify.",
        "Tags":  [
                     "ExtendedEvent",
                     "XE",
                     "XEvent"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2008 or higher.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Name",
                           "The Name of the session to create.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Path",
                           "The path to the xml file or files for the session(s).",
                           "FullName",
                           false,
                           "true (ByPropertyName)",
                           ""
                       ],
                       [
                           "Template",
                           "Specifies the name of one of the templates from the dbatools repository. Press tab to cycle through the provided templates.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "TargetFilePath",
                           "By default, files will be created in the default xel directory. Use TargetFilePath to change all instances of\r\nfilename = \"file.xel\" to filename = \"$TargetFilePath\\file.xel\". Only specify the directory, not the file itself.\nThis path is relative to the destination directory",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "TargetFileMetadataPath",
                           "By default, files will be created in the default xem directory. Use TargetFileMetadataPath to change all instances of\r\nfilename = \"file.xem\" to filename = \"$TargetFilePath\\file.xem\". Only specify the directory, not the file itself.\nThis path is relative to the destination directory",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Imports a new XESession XML Template",
        "Name":  "Import-DbaXESessionTemplate",
        "Links":  "https://dbatools.io/Import-DbaXESessionTemplate",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eImport-DbaXESessionTemplate -SqlInstance sql2017 -Template db_query_wait_stats\nCreates a new XESession named db_query_wait_stats from the dbatools repository to the SQL Server sql2017.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eImport-DbaXESessionTemplate -SqlInstance sql2017 -Template db_query_wait_stats -Name \"Query Wait Stats\"\nCreates a new XESession named \"Query Wait Stats\" using the db_query_wait_stats template.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaXESession -SqlInstance sql2017 -Session db_ola_health | Remove-DbaXESession\nPS C:\\\u003e Import-DbaXESessionTemplate -SqlInstance sql2017 -Template db_ola_health | Start-DbaXESession\nImports a session if it exists, then recreates it using a template.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaXESessionTemplate | Out-GridView -PassThru | Import-DbaXESessionTemplate -SqlInstance sql2017\nAllows you to select a Session template then import to an instance named sql2017.",
        "Syntax":  "Import-DbaXESessionTemplate [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Name] \u003cString\u003e] [[-Path] \u003cString[]\u003e] [[-Template] \u003cString[]\u003e] [[-TargetFilePath] \u003cString\u003e] [[-TargetFileMetadataPath] \u003cString\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Install-DbaFirstResponderKit",
        "Description":  "Downloads, extracts and installs the First Responder Kit stored procedures:\nsp_Blitz, sp_BlitzWho, sp_BlitzFirst, sp_BlitzIndex, sp_BlitzCache and sp_BlitzTrace, etc.\n\nFirst Responder Kit links:\nhttp://FirstResponderKit.org\nhttps://github.com/BrentOzarULTD/SQL-Server-First-Responder-Kit",
        "Tags":  [
                     "BrentOzar",
                     "FRK",
                     "FirstResponderKit"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Branch",
                           "Specifies an alternate branch of the First Responder Kit to install. (master or dev)",
                           "",
                           false,
                           "false",
                           "master"
                       ],
                       [
                           "Database",
                           "Specifies the database to instal the First Responder Kit stored procedures into",
                           "",
                           false,
                           "false",
                           "master"
                       ],
                       [
                           "LocalFile",
                           "Specifies the path to a local file to install FRK from. This *should* be the zipfile as distributed by the maintainers.\r\nIf this parameter is not specified, the latest version will be downloaded and installed from https://github.com/BrentOzarULTD/SQL-Server-First-Responder-Kit",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Force",
                           "If this switch is enabled, the FRK will be downloaded from the internet even if previously cached.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts to confirm actions",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Tara Kizer, Brent Ozar Unlimited (https://www.brentozar.com/)",
        "Synopsis":  "Installs or updates the First Responder Kit stored procedures.",
        "Name":  "Install-DbaFirstResponderKit",
        "Links":  "https://dbatools.io/Install-DbaFirstResponderKit",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eInstall-DbaFirstResponderKit -SqlInstance server1 -Database master\nLogs into server1 with Windows authentication and then installs the FRK in the master database.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eInstall-DbaFirstResponderKit -SqlInstance server1\\instance1 -Database DBA\nLogs into server1\\instance1 with Windows authentication and then installs the FRK in the DBA database.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eInstall-DbaFirstResponderKit -SqlInstance server1\\instance1 -Database master -SqlCredential $cred\nLogs into server1\\instance1 with SQL authentication and then installs the FRK in the master database.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eInstall-DbaFirstResponderKit -SqlInstance sql2016\\standardrtm, sql2016\\sqlexpress, sql2014\nLogs into sql2016\\standardrtm, sql2016\\sqlexpress and sql2014 with Windows authentication and then installs the FRK in the master database.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003e$servers = \"sql2016\\standardrtm\", \"sql2016\\sqlexpress\", \"sql2014\"\nPS C:\\\u003e $servers | Install-DbaFirstResponderKit\nLogs into sql2016\\standardrtm, sql2016\\sqlexpress and sql2014 with Windows authentication and then installs the FRK in the master database.\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eInstall-DbaFirstResponderKit -SqlInstance sql2016 -Branch dev\nInstalls the dev branch version of the FRK in the master database on sql2016 instance.",
        "Syntax":  "Install-DbaFirstResponderKit [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Branch] \u003cString\u003e] [[-Database] \u003cObject\u003e] [[-LocalFile] \u003cString\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Install-DbaMaintenanceSolution",
        "Description":  "This script will download and install the latest version of SQL Server Maintenance Solution created by Ola Hallengren",
        "Tags":  [
                     "Ola",
                     "Maintenance"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance onto which the Maintenance Solution will be installed.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database where Ola Hallengren\u0027s solution will be installed. Defaults to master.",
                           "",
                           false,
                           "false",
                           "master"
                       ],
                       [
                           "BackupLocation",
                           "Location of the backup root directory. If this is not supplied, the default backup directory will be used.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "CleanupTime",
                           "Time in hours, after which backup files are deleted.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "OutputFileDirectory",
                           "Specify the output file directory where the Maintenance Solution will write to.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ReplaceExisting",
                           "If this switch is enabled, objects already present in the target database will be dropped and recreated.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "LogToTable",
                           "If this switch is enabled, the Maintenance Solution will be configured to log commands to a table.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Solution",
                           "Specifies which portion of the Maintenance solution to install. Valid values are All (full solution), Backup, IntegrityCheck and IndexOptimize.",
                           "",
                           false,
                           "false",
                           "All"
                       ],
                       [
                           "InstallJobs",
                           "If this switch is enabled, the corresponding SQL Agent Jobs will be created.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "LocalFile",
                           "Specifies the path to a local file to install Ola\u0027s solution from. This *should* be the zipfile as distributed by the maintainers.\r\nIf this parameter is not specified, the latest version will be downloaded and installed from https://github.com/olahallengren/sql-server-maintenance-solution",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Force",
                           "If this switch is enabled, the Ola\u0027s solution will be downloaded from the internet even if previously cached.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Viorel Ciucu, cviorel.com",
        "Synopsis":  "Download and Install SQL Server Maintenance Solution created by Ola Hallengren (https://ola.hallengren.com)",
        "Name":  "Install-DbaMaintenanceSolution",
        "Links":  "http://dbatools.io/Install-DbaMaintenanceSolution",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eInstall-DbaMaintenanceSolution -SqlInstance RES14224 -Database DBA -CleanupTime 72\nInstalls Ola Hallengren\u0027s Solution objects on RES14224 in the DBA database.\r\nBackups will default to the default Backup Directory.\r\nIf the Maintenance Solution already exists, the script will be halted.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eInstall-DbaMaintenanceSolution -SqlInstance RES14224 -Database DBA -BackupLocation \"Z:\\SQLBackup\" -CleanupTime 72\nThis will create the Ola Hallengren\u0027s Solution objects. Existing objects are not affected in any way.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eInstall-DbaMaintenanceSolution -SqlInstance RES14224 -Database DBA -BackupLocation \"Z:\\SQLBackup\" -CleanupTime 72 -ReplaceExisting\nThis will drop and then recreate the Ola Hallengren\u0027s Solution objects\r\nThe cleanup script will drop and recreate:\r\n- TABLE [dbo].[CommandLog]\r\n- STORED PROCEDURE [dbo].[CommandExecute]\r\n- STORED PROCEDURE [dbo].[DatabaseBackup]\r\n- STORED PROCEDURE [dbo].[DatabaseIntegrityCheck]\r\n- STORED PROCEDURE [dbo].[IndexOptimize]\nThe following SQL Agent jobs will be deleted:\r\n- \u0027Output File Cleanup\u0027\r\n- \u0027IndexOptimize - USER_DATABASES\u0027\r\n- \u0027sp_delete_backuphistory\u0027\r\n- \u0027DatabaseBackup - USER_DATABASES - LOG\u0027\r\n- \u0027DatabaseBackup - SYSTEM_DATABASES - FULL\u0027\r\n- \u0027DatabaseBackup - USER_DATABASES - FULL\u0027\r\n- \u0027sp_purge_jobhistory\u0027\r\n- \u0027DatabaseIntegrityCheck - SYSTEM_DATABASES\u0027\r\n- \u0027CommandLog Cleanup\u0027\r\n- \u0027DatabaseIntegrityCheck - USER_DATABASES\u0027\r\n- \u0027DatabaseBackup - USER_DATABASES - DIFF\u0027",
        "Syntax":  "Install-DbaMaintenanceSolution [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject\u003e] [[-BackupLocation] \u003cString\u003e] [[-CleanupTime] \u003cInt32\u003e] [[-OutputFileDirectory] \u003cString\u003e] [-ReplaceExisting] [-LogToTable] [[-Solution] \u003cString\u003e] [-InstallJobs] [[-LocalFile] \u003cString\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Install-DbaSqlWatch",
        "Description":  "Downloads, extracts and installs or updates SqlWatch.\nhttps://sqlwatch.io/",
        "Tags":  "SqlWatch",
        "Params":  [
                       [
                           "SqlInstance",
                           "SQL Server name or SMO object representing the SQL Server to connect to.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Specifies the database to install SqlWatch into. Defaults to SQLWATCH.",
                           "",
                           false,
                           "false",
                           "SQLWATCH"
                       ],
                       [
                           "LocalFile",
                           "Specifies the path to a local file to install SqlWatch from. This *should* be the zipfile as distributed by the maintainers.\r\nIf this parameter is not specified, the latest version will be downloaded and installed from https://github.com/marcingminski/sqlwatch",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Force",
                           "If this switch is enabled, SqlWatch will be downloaded from the internet even if previously cached.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts to confirm actions",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Ken K (github.com/koglerk)",
        "Synopsis":  "Installs or updates SqlWatch.",
        "Name":  "Install-DbaSqlWatch",
        "Links":  "https://dbatools.io/Install-DbaSqlWatch",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eInstall-DbaSqlWatch -SqlInstance server1\nLogs into server1 with Windows authentication and then installs SqlWatch in the SQLWATCH database.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eInstall-DbaSqlWatch -SqlInstance server1\\instance1 -Database DBA\nLogs into server1\\instance1 with Windows authentication and then installs SqlWatch in the DBA database.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eInstall-DbaSqlWatch -SqlInstance server1\\instance1 -Database DBA -SqlCredential $cred\nLogs into server1\\instance1 with SQL authentication and then installs SqlWatch in the DBA database.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eInstall-DbaSqlWatch -SqlInstance sql2016\\standardrtm, sql2016\\sqlexpress, sql2014\nLogs into sql2016\\standardrtm, sql2016\\sqlexpress and sql2014 with Windows authentication and then installs SqlWatch in the SQLWATCH database.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003e$servers = \"sql2016\\standardrtm\", \"sql2016\\sqlexpress\", \"sql2014\"\n$servers | Install-DbaSqlWatch\nLogs into sql2016\\standardrtm, sql2016\\sqlexpress and sql2014 with Windows authentication and then installs SqlWatch in the SQLWATCH database.",
        "Syntax":  "Install-DbaSqlWatch [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cString\u003e] [[-LocalFile] \u003cString\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Install-DbaWatchUpdate",
        "Description":  "Adds the scheduled task to support Watch-DbaUpdate.",
        "Tags":  "Module",
        "Params":  [
                       [
                           "TaskName",
                           "Provide custom name for the Scheduled Task",
                           "",
                           false,
                           "false",
                           "dbatools version check"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Adds the scheduled task to support Watch-DbaUpdate.",
        "Name":  "Install-DbaWatchUpdate",
        "Links":  "https://dbatools.io/Install-DbaWatchUpdate",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eInstall-DbaWatchUpdate\nAdds the scheduled task needed by Watch-DbaUpdate\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eInstall-DbaWatchUpdate -TaskName MyScheduledTask\nWill create the scheduled task as the name MyScheduledTask",
        "Syntax":  "Install-DbaWatchUpdate [[-TaskName] \u003cString\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Install-DbaWhoIsActive",
        "Description":  "This command downloads, extracts and installs sp_WhoisActive with Adam\u0027s permission. To read more about sp_WhoisActive, please visit http://whoisactive.com and http://sqlblog.com/blogs/adam_machanic/archive/tags/who+is+active/default.aspx\n\nPlease consider donating to Adam if you find this stored procedure helpful: http://tinyurl.com/WhoIsActiveDonate\n\nNote that you will be prompted a bunch of times to confirm an action.",
        "Tags":  [
                     "AdamMechanic",
                     "WhoIsActive",
                     "SpWhoIsActive"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. Server version must be SQL Server version 2005 or higher.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "LocalFile",
                           "Specifies the path to a local file to install sp_WhoisActive from. This can be either the zipfile as distributed by the website or the expanded SQL script. If this parameter is not specified, the \r\nlatest version will be downloaded and installed from https://whoisactive.com/",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database to install sp_WhoisActive into. This parameter is mandatory when executing this command unattended.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Force",
                           "If this switch is enabled, the sp_WhoisActive will be downloaded from the internet even if previously cached.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Install-SqlWhoIsActive",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Automatically installs or updates sp_WhoisActive by Adam Machanic.",
        "Name":  "Install-DbaWhoIsActive",
        "Links":  "https://dbatools.io/Install-DbaWhoIsActive",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eInstall-DbaWhoIsActive -SqlInstance sqlserver2014a -Database master\nDownloads sp_WhoisActive from the internet and installs to sqlserver2014a\u0027s master database. Connects to SQL Server using Windows Authentication.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eInstall-DbaWhoIsActive -SqlInstance sqlserver2014a -SqlCredential $cred\nPops up a dialog box asking which database on sqlserver2014a you want to install the procedure into. Connects to SQL Server using SQL Authentication.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eInstall-DbaWhoIsActive -SqlInstance sqlserver2014a -Database master -LocalFile c:\\SQLAdmin\\whoisactive_install.sql\nInstalls sp_WhoisActive to sqlserver2014a\u0027s master database from the local file whoisactive_install.sql\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003e$instances = Get-DbaCmsRegServer sqlserver\nPS C:\\\u003e Install-DbaWhoIsActive -SqlInstance $instances -Database master\nInstalls sp_WhoisActive to all servers within CMS",
        "Syntax":  "Install-DbaWhoIsActive [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-LocalFile \u003cString\u003e] [-Database \u003cObject\u003e] [-EnableException] [-Force] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Invoke-DbaAdvancedRestore",
        "Description":  "This is the final piece in the Restore-DbaDatabase Stack. Usually a BackupHistory object will arrive here from `Restore-Dbadatabase` via the following pipeline:\n`Get-DbaBackupInformation  | Select-DbaBackupInformation | Format-DbaBackupInformation | Test-DbaBackupInformation | Invoke-DbaAdvancedRestore`\n\nWe have exposed these functions publicly to allow advanced users to perform operations that we don\u0027t support, or won\u0027t add as they would make things too complex for the majority of our users\n\nFor example if you wanted to do some very complex redirection during a migration, then doing the rewrite of destinations may be better done with your own custom scripts rather than via `Format-DbaBackupInformation`\n\nWe would recommend ALWAYS pushing your input through `Test-DbaBackupInformation` just to make sure that it makes sense to us.",
        "Tags":  [
                     "Restore",
                     "Backup"
                 ],
        "Params":  [
                       [
                           "BackupHistory",
                           "The BackupHistory object to be restored.\r\nCan be passed in on the pipeline",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlInstance",
                           "The SqlInstance to which the backups should be restored",
                           "ServerInstance,SqlServer",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "SqlCredential to be used to connect to the target SqlInstance",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "OutputScriptOnly",
                           "If set, the restore will not be performed, but the T-SQL scripts to perform it will be returned",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "VerifyOnly",
                           "If set, performs a Verify of the backups rather than a full restore",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "RestoreTime",
                           "Point in Time to which the database should be restored.\nThis should be the same value or earlier, as used in the previous pipeline stages",
                           "",
                           false,
                           "false",
                           "(Get-Date).AddDays(2)"
                       ],
                       [
                           "StandbyDirectory",
                           "A folder path where a standby file should be created to put the recovered databases in a standby mode",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "NoRecovery",
                           "Leave the database in a restoring state so that further restore may be made",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "MaxTransferSize",
                           "Parameter to set the unit of transfer. Values must be a multiple by 64kb",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "BlockSize",
                           "Specifies the block size to use. Must be one of 0.5kb,1kb,2kb,4kb,8kb,16kb,32kb or 64kb\r\nCan be specified in bytes\r\nRefer to https://msdn.microsoft.com/en-us/library/ms178615.aspx for more detail",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "BufferCount",
                           "Number of I/O buffers to use to perform the operation.\r\nRefer to https://msdn.microsoft.com/en-us/library/ms178615.aspx for more detail",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "Continue",
                           "Indicates that the restore is continuing a restore, so target database must be in Recovering or Standby states",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "AzureCredential",
                           "AzureCredential required to connect to blob storage holding the backups",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "WithReplace",
                           "Indicated that if the database already exists it should be replaced",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "KeepCDC",
                           "Indicates whether CDC information should be restored as part of the database",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "PageRestore",
                           "The output from Get-DbaSuspect page containing the suspect pages to be restored.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "Replaces user friendly yellow warnings with bloody red exceptions of doom!\r\nUse this if you want the function to throw terminating errors you want to catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the cmdlet runs. The cmdlet is not run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before running the cmdlet.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Stuart Moore (@napalmgram - http://stuart-moore.com)",
        "Synopsis":  "Allows the restore of modified BackupHistory Objects\nFor 90% of users Restore-DbaDatabase should be your point of access to this function. The other 10% use it at their own risk",
        "Name":  "Invoke-DbaAdvancedRestore",
        "Links":  "https://dbatools.io/Invoke-DbaAdvancedRestore",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003e$BackupHistory | Invoke-DbaAdvancedRestore -SqlInstance MyInstance\nWill restore all the backups in the BackupHistory object according to the transformations it contains\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e$BackupHistory | Invoke-DbaAdvancedRestore -SqlInstance MyInstance -OutputScriptOnly\nPS C:\\\u003e $BackupHistory | Invoke-DbaAdvancedRestore -SqlInstance MyInstance\nFirst generates just the T-SQL restore scripts so they can be sanity checked, and then if they are good perform the full restore.\r\nBy reusing the BackupHistory object there is no need to rescan all the backup files again",
        "Syntax":  "Invoke-DbaAdvancedRestore [-BackupHistory] \u003cObject[]\u003e [[-SqlInstance] \u003cDbaInstanceParameter\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [-OutputScriptOnly] [-VerifyOnly] [[-RestoreTime] \u003cDateTime\u003e] [[-StandbyDirectory] \u003cString\u003e] [-NoRecovery] [[-MaxTransferSize] \u003cInt32\u003e] [[-BlockSize] \u003cInt32\u003e] [[-BufferCount] \u003cInt32\u003e] [-Continue] [[-AzureCredential] \u003cString\u003e] [-WithReplace] [-KeepCDC] [[-PageRestore] \u003cObject[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Invoke-DbaAgFailover",
        "Description":  "Failover an availability group.",
        "Tags":  [
                     "AG",
                     "AvailabilityGroup",
                     "HA"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The SQL Server instance. Server version must be SQL Server version 2012 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential).",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AvailabilityGroup",
                           "Only failover specific availability groups.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Enables piping from Get-DbaAvailabilityGroup",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Force",
                           "Force Failover and allow data loss",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Failover an availability group.",
        "Name":  "Invoke-DbaAgFailover",
        "Links":  "https://dbatools.io/Invoke-DbaAgFailover",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eInvoke-DbaAgFailover -SqlInstance sql2017 -AvailabilityGroup SharePoint\nSafely (no potential data loss) fails over the SharePoint AG to sql2017. Prompts for confirmation.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaAvailabilityGroup -SqlInstance sql2017 | Out-GridView -Passthru | Invoke-DbaAgFailover -Confirm:$false\nSafely (no potential data loss) fails over the selected availability groups to sql2017. Does not prompt for confirmation.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eInvoke-DbaAgFailover -SqlInstance sql2017 -AvailabilityGroup SharePoint -Force\nForcefully (with potential data loss) fails over the SharePoint AG to sql2017. Prompts for confirmation.",
        "Syntax":  "Invoke-DbaAgFailover [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-AvailabilityGroup] \u003cString[]\u003e] [[-InputObject] \u003cAvailabilityGroup[]\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Invoke-DbaBalanceDataFiles",
        "Description":  "When you have a large database with a single data file and add another file, SQL Server will only use the new file until it\u0027s about the same size.\nYou may want to balance the data between all the data files.\n\nThe function will check the server version and edition to see if the it allows for online index rebuilds.\nIf the server does support it, it will try to rebuild the index online.\nIf the server doesn\u0027t support it, it will rebuild the index offline. Be carefull though, this can cause downtime\n\nThe tables must have a clustered index to be able to balance out the data.\nThe function does NOT yet support heaps.\n\nThe function will also check if the file groups are subject to balance out.\nA file group whould have at least have 2 data files and should be writable.\nIf a table is within such a file group it will be subject for processing. If not the table will be skipped.",
        "Tags":  [
                     "Database",
                     "FileManagement",
                     "File",
                     "Space"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Table",
                           "The tables(s) of the database to process. If unspecified, all tables will be processed.",
                           "Tables",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "RebuildOffline",
                           "Will set all the indexes to rebuild offline.\r\nThis option is also needed when the server version is below 2005.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Force",
                           "This will disable the check for enough disk space for the action to be successful.\r\nUse this with caution!!",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts for confirmation of every step. For example:\nThe server does not support online rebuilds of indexes.\r\nDo you want to rebuild the indexes offline?\r\n[Y] Yes  [N] No   [?] Help (default is \"Y\"):",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Sander Stad (@sqlstad), sqlstad.nl",
        "Synopsis":  "Re-balance data between data files",
        "Name":  "Invoke-DbaBalanceDataFiles",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eInvoke-DbaBalanceDataFiles -SqlInstance sql1 -Database db1\nThis command will distribute the data in database db1 on instance sql1\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eInvoke-DbaBalanceDataFiles -SqlInstance sql1 -Database db1 | Select-Object -ExpandProperty DataFilesEnd\nThis command will distribute the data in database db1 on instance sql1\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eInvoke-DbaBalanceDataFiles -SqlInstance sql1 -Database db1 -Table table1,table2,table5\nThis command will distribute the data for only the tables table1,table2 and table5\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eInvoke-DbaBalanceDataFiles -SqlInstance sql1 -Database db1 -RebuildOffline\nThis command will consider the fact that there might be a SQL Server edition that does not support online rebuilds of indexes.\r\nBy supplying this parameter you give permission to do the rebuilds offline if the edition does not support it.",
        "Syntax":  "Invoke-DbaBalanceDataFiles [-SqlCredential \u003cPSCredential\u003e] [-Database \u003cObject[]\u003e] [-Table \u003cObject[]\u003e] [-RebuildOffline] [-EnableException] [-Force] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nInvoke-DbaBalanceDataFiles -SqlInstance \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Database \u003cObject[]\u003e] [-Table \u003cObject[]\u003e] [-RebuildOffline] [-EnableException] [-Force] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Invoke-DbaCycleErrorLog",
        "Description":  "Cycles the current error log for the instance (SQL Server) and/or SQL Server Agent.",
        "Tags":  [
                     "Log",
                     "Cycle"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.You must have sysadmin access and server version must be SQL Server version 2000 or higher.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Type",
                           "The log to cycle.\r\nAccepts: instance or agent.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Shawn Melton (@wsmelton), https://wsmelton.github.io",
        "Synopsis":  "Cycles the current instance or agent log.",
        "Name":  "Invoke-DbaCycleErrorLog",
        "Links":  "https://dbatools.io/Invoke-DbaCycleLog",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eInvoke-DbaCycleLog -SqlInstance sql2016 -Type agent\nCycles the current error log for the SQL Server Agent on SQL Server instance sql2016\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eInvoke-DbaCycleLog -SqlInstance sql2016 -Type instance\nCycles the current error log for the SQL Server instance on SQL Server instance sql2016\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eInvoke-DbaCycleLog -SqlInstance sql2016\nCycles the current error log for both SQL Server instance and SQL Server Agent on SQL Server instance sql2016",
        "Syntax":  "Invoke-DbaCycleErrorLog [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Type] \u003cString\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Invoke-DbaDbccFreeCache",
        "Description":  "Allows execution of Database Console Commands that act at Server Level to clear Memory caches\n\nAllows execution of the following commands\n    DBCC FREEPROCCACHE\n    DBCC FREESESSIONCACHE\n    DBCC FREESYSTEMCACHE\n\nRead more:\n    - https://docs.microsoft.com/en-us/sql/t-sql/database-console-commands/dbcc-freeproccache-transact-sql\n    - https://docs.microsoft.com/en-us/sql/t-sql/database-console-commands/dbcc-freesessioncache-transact-sql\n    - https://docs.microsoft.com/en-us/sql/t-sql/database-console-commands/dbcc-freesystemcache-transact-sql",
        "Tags":  "DBCC",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Operation",
                           "DBCC Operation to Perform - Supports specific set of operations",
                           "",
                           false,
                           "false",
                           "FreeProcCache"
                       ],
                       [
                           "InputValue",
                           "Value used for Operation - meaning depends on Operation\r\nDBCC FREEPROCCACHE accepts\r\n    a plan_handle of type varbinary(64)\r\n    a sql_handle of type varbinary(64)\r\n    or the name of a Resource Governor resource pool of type sysname\r\n    If blank then clears all elements from the plan cache\r\nDBCC FREESYSTEMCACHE accepts\r\n    \u0027ALL\u0027 for ALL specifies all supported caches\r\n    or name of a Resource Governor pool cache\r\nNot required for other values",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "NoInformationalMessages",
                           "Suppresses all informational messages.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "MarkInUseForRemoval",
                           "Used when Operation = DBCC FREESYSTEMCACHE\r\nAsynchronously frees currently used entries from their respective caches after they become unused",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the cmdlet runs. The cmdlet is not run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before running the cmdlet.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Patrick Flynn (@sqllensman)",
        "Synopsis":  "Execution of Database Console Commands that clear Server level Memory caches",
        "Name":  "Invoke-DbaDbccFreeCache",
        "Links":  "https://dbatools.io/Invoke-DbaDbccFreeCache",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eInvoke-DbaDbccFreeCache -SqlInstance SqlServer2017 -Operation FREEPROCCACHE\nRuns the command DBCC FREEPROCCACHE against the instance SqlServer2017 using Windows Authentication\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eInvoke-DbaDbccFreeCache -SqlInstance SqlServer2017 -Operation FREESESSIONCACHE -NoInformationalMessages\nRuns the command DBCC FREESESSIONCACHE WITH NO_INFOMSGS against the instance SqlServer2017 using Windows Authentication\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eInvoke-DbaDbccFreeCache -SqlInstance SqlServer2017 -Operation FREESYSTEMCACHE -NoInformationalMessages\nRuns the command DBCC FREESYSTEMCACHE WITH NO_INFOMSGS against the instance SqlServer2017 using Windows Authentication\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eInvoke-DbaDbccFreeCache -SqlInstance SqlServer2017 -Operation FREEPROCCACHE -InputValue 0x060006001ECA270EC0215D05000000000000000000000000\nRemove a specific plan with plan_handle 0x060006001ECA270EC0215D05000000000000000000000000 from the cache via the command DBCC FREEPROCCACHE(0x060006001ECA270EC0215D05000000000000000000000000) \r\nagainst the instance SqlServer2017 using Windows Authentication\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eInvoke-DbaDbccFreeCache -SqlInstance SqlServer2017 -Operation FREEPROCCACHE -InputValue default\nRuns the command DBCC FREEPROCCACHE(\u0027default\u0027) against the instance SqlServer2017 using Windows Authentication. This clears all cache entries associated with a resource pool \u0027default\u0027.\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eInvoke-DbaDbccFreeCache -SqlInstance SqlServer2017 -Operation FREESYSTEMCACHE -InputValue default\nRuns the command DBCC FREESYSTEMCACHE (\u0027ALL\u0027, default) against the instance SqlServer2017 using Windows Authentication. This will clean all the caches with entries specific to the resource pool named \r\n\"default\".\n-------------------------- EXAMPLE 7 --------------------------\nPS C:\\\u003eInvoke-DbaDbccFreeCache -SqlInstance SqlServer2017 -Operation FREESYSTEMCACHE -InputValue default -MarkInUseForRemoval\nRuns the command DBCC FREESYSTEMCACHE (\u0027ALL\u0027, default) WITH MARK_IN_USE_FOR_REMOVAL against the instance SqlServer2017 using Windows Authentication. This will to release entries once the entries \r\nbecome unused for all the caches with entries specific to the resource pool named \"default\".",
        "Syntax":  "Invoke-DbaDbccFreeCache [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Operation] \u003cString\u003e] [[-InputValue] \u003cString\u003e] [-NoInformationalMessages] [-MarkInUseForRemoval] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Invoke-DbaDbClone",
        "Description":  "Clones a database schema and statistics.\n\nThis can be useful for testing query performance without requiring all the space needed for the data in the database.\n\nRead more:\n    - https://sqlperformance.com/2016/08/sql-statistics/expanding-dbcc-clonedatabase\n    - https://support.microsoft.com/en-us/help/3177838/how-to-use-dbcc-clonedatabase-to-generate-a-schema-and-statistics-only\n\nThanks to Microsoft Tiger Team for the code and idea https://github.com/Microsoft/tigertoolbox/",
        "Tags":  [
                     "Statistics",
                     "Performance",
                     "Clone"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database to clone - this list is auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Enables piping from Get-DbaDatabase",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "CloneDatabase",
                           "The name(s) to clone to.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeStatistics",
                           "Exclude the statistics in the cloned database",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "ExcludeQueryStore",
                           "Exclude the QueryStore data in the cloned database",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "UpdateStatistics",
                           "Update the statistics prior to cloning (per Microsoft Tiger Team formula)",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Invoke-DbaDatabaseClone",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Clones a database schema and statistics",
        "Name":  "Invoke-DbaDbClone",
        "Links":  "https://dbatools.io/Invoke-DbaDbClone",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eInvoke-DbaDbClone -SqlInstance sql2016 -Database mydb -CloneDatabase myclone\nClones mydb to myclone on sql2016\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDatabase -SqlInstance sql2016 -Database mydb | Invoke-DbaDbClone -CloneDatabase myclone, myclone2 -UpdateStatistics\nUpdates the statistics of mydb then clones to myclone and myclone2",
        "Syntax":  "Invoke-DbaDbClone [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cString[]\u003e] [[-InputObject] \u003cDatabase[]\u003e] [[-CloneDatabase] \u003cString[]\u003e] [-ExcludeStatistics] [-ExcludeQueryStore] [-UpdateStatistics] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Invoke-DbaDbDecryptObject",
        "Description":  "When a procedure or a function is created with encryption and you lost the code you\u0027re in trouble.\nYou cannot alter the object or view the definition.\nWith this command you can search for the object and decrypt the it.\n\nThe command will output the results to the console.\nThere is an option to export all the results to a folder creating .sql files.\n\nMake sure the instance allowed dedicated administrator connections (DAC).\nThe binary versions of the objects can only be retrieved using a DAC connection.\nYou can check the DAC connection with:\n\u0027Get-DbaSpConfigure -SqlInstance [yourinstance] -ConfigName RemoteDacConnectionsEnabled\u0027\nIt should say 1 in the ConfiguredValue.\n\nTo change the configurations you can use the Set-DbaSpConfigure command:\n\u0027Set-DbaSpConfigure -SqlInstance [yourinstance] -ConfigName RemoteDacConnectionsEnabled -Value 1\u0027\nIn some cases you may need to reboot the instance.",
        "Tags":  [
                     "Encryption",
                     "Decrypt",
                     "Database"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Database to look through for the object.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "ObjectName",
                           "The name of the object to search for in the database.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EncodingType",
                           "The encoding that\u0027s used to decrypt and encrypt values.",
                           "",
                           false,
                           "false",
                           "ASCII"
                       ],
                       [
                           "ExportDestination",
                           "Used for exporting the results to.\r\nThe destiation will use the instance name, database name and object type i.e.: C:\\temp\\decrypt\\SQLDB1\\DB1\\StoredProcedure",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Sander Stad (@sqlstad), sqlstad.nl",
        "Synopsis":  "Invoke-DbaDbDecryptObject returns the decrypted version of an object",
        "Name":  "Invoke-DbaDbDecryptObject",
        "Links":  "https://dbatools.io/Invoke-DbaDbDecryptObject",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eInvoke-DbaDbDecryptObject -SqlInstance SQLDB1 -Database DB1 -ObjectName Function1\nDecrypt object \"Function1\" in DB1 of instance SQLDB1 and output the data to the user.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eInvoke-DbaDbDecryptObject -SqlInstance SQLDB1 -Database DB1 -ObjectName Function1 -ExportDestination C:\\temp\\decrypt\nDecrypt object \"Function1\" in DB1 of instance SQLDB1 and output the data to the folder \"C:\\temp\\decrypt\".\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eInvoke-DbaDbDecryptObject -SqlInstance SQLDB1 -Database DB1 -ExportDestination C:\\temp\\decrypt\nDecrypt all objects in DB1 of instance SQLDB1 and output the data to the folder \"C:\\temp\\decrypt\"\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eInvoke-DbaDbDecryptObject -SqlInstance SQLDB1 -Database DB1 -ObjectName Function1, Function2\nDecrypt objects \"Function1\" and \"Function2\" and output the data to the user.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003e\"SQLDB1\" | Invoke-DbaDbDecryptObject -Database DB1 -ObjectName Function1, Function2\nDecrypt objects \"Function1\" and \"Function2\" and output the data to the user using a pipeline for the instance.",
        "Syntax":  "Invoke-DbaDbDecryptObject [-SqlInstance] \u003cDbaInstanceParameter\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-Database] \u003cObject[]\u003e [[-ObjectName] \u003cString[]\u003e] [[-EncodingType] \u003cString\u003e] [[-ExportDestination] \u003cString\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Invoke-DbaDbLogShipping",
        "Description":  "Invoke-DbaDbLogShipping helps to easily set up log shipping for one or more databases.\n\nThis function will make a lot of decisions for you assuming you want default values like a daily interval for the schedules with a 15 minute interval on the day.\nThere are some settings that cannot be made by the function and they need to be prepared before the function is executed.\n\nThe following settings need to be made before log shipping can be initiated:\n- Backup destination (the folder and the privileges)\n- Copy destination (the folder and the privileges)\n\n* Privileges\nMake sure your agent service on both the primary and the secondary instance is an Active Directory account.\nAlso have the credentials ready to set the folder permissions\n\n** Network share\nThe backup destination needs to be shared and have the share privileges of FULL CONTROL to Everyone.\n\n** NTFS permissions\nThe backup destination must have at least read/write permissions for the primary instance agent account.\nThe backup destination must have at least read permissions for the secondary instance agent account.\nThe copy destination must have at least read/write permission for the secondary instance agent acount.",
        "Tags":  "LogShipping",
        "Params":  [
                       [
                           "SourceSqlInstance",
                           "Source SQL Server instance which contains the databases to be log shipped.\r\nYou must have sysadmin access and server version must be SQL Server version 2000 or greater.",
                           "SourceServerInstance,SourceSqlServerSqlServer,Source",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "DestinationSqlInstance",
                           "Destination SQL Server instance which contains the databases to be log shipped.\r\nYou must have sysadmin access and server version must be SQL Server version 2000 or greater.",
                           "DestinationServerInstance,DestinationSqlServer,Destination",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SourceSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SourceCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "DestinationSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "DestinationCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Database to set up log shipping for.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "BackupNetworkPath",
                           "The backup unc path to place the backup files. This is the root directory.\r\nA directory with the name of the database will be created in this path.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "BackupLocalPath",
                           "If the backup path is locally for the source server you can also set this value.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "BackupJob",
                           "Name of the backup that will be created in the SQL Server agent.\r\nThe parameter works as a prefix where the name of the database will be added to the backup job name.\r\nThe default is \"LSBackup_[databasename]\"",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "BackupRetention",
                           "The backup retention period in minutes. Default is 4320 / 72 hours",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "BackupSchedule",
                           "Name of the backup schedule created for the backup job.\r\nThe parameter works as a prefix where the name of the database will be added to the backup job schedule name.\r\nDefault is \"LSBackupSchedule_[databasename]\"",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "BackupScheduleDisabled",
                           "Parameter to set the backup schedule to disabled upon creation.\r\nBy default the schedule is enabled.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "BackupScheduleFrequencyType",
                           "A value indicating when a job is to be executed.\r\nAllowed values are \"Daily\", \"AgentStart\", \"IdleComputer\"",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "BackupScheduleFrequencyInterval",
                           "The number of type periods to occur between each execution of the backup job.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "BackupScheduleFrequencySubdayType",
                           "Specifies the units for the sub-day FrequencyInterval.\r\nAllowed values are \"Time\", \"Seconds\", \"Minutes\", \"Hours\"",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "BackupScheduleFrequencySubdayInterval",
                           "The number of sub-day type periods to occur between each execution of the backup job.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "BackupScheduleFrequencyRelativeInterval",
                           "A job\u0027s occurrence of FrequencyInterval in each month, if FrequencyInterval is 32 (monthlyrelative).",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "BackupScheduleFrequencyRecurrenceFactor",
                           "The number of weeks or months between the scheduled execution of a job. FrequencyRecurrenceFactor is used only if FrequencyType is 8, \"Weekly\", 16, \"Monthly\", 32 or \"MonthlyRelative\".",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "BackupScheduleStartDate",
                           "The date on which execution of a job can begin.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "BackupScheduleEndDate",
                           "The date on which execution of a job can stop.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "BackupScheduleStartTime",
                           "The time on any day to begin execution of a job. Format HHMMSS / 24 hour clock.\r\nExample: \u0027010000\u0027 for 01:00:00 AM.\r\nExample: \u0027140000\u0027 for 02:00:00 PM.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "BackupScheduleEndTime",
                           "The time on any day to end execution of a job. Format HHMMSS / 24 hour clock.\r\nExample: \u0027010000\u0027 for 01:00:00 AM.\r\nExample: \u0027140000\u0027 for 02:00:00 PM.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "BackupThreshold",
                           "Is the length of time, in minutes, after the last backup before a threshold alert error is raised.\r\nThe default is 60.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "CompressBackup",
                           "Do the backups need to be compressed. By default the backups are not compressed.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "CopyDestinationFolder",
                           "The path to copy the transaction log backup files to. This is the root directory.\r\nA directory with the name of the database will be created in this path.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "CopyJob",
                           "Name of the copy job that will be created in the SQL Server agent.\r\nThe parameter works as a prefix where the name of the database will be added to the copy job name.\r\nThe default is \"LSBackup_[databasename]\"",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "CopyRetention",
                           "The copy retention period in minutes. Default is 4320 / 72 hours",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "CopySchedule",
                           "Name of the backup schedule created for the copy job.\r\nThe parameter works as a prefix where the name of the database will be added to the copy job schedule name.\r\nDefault is \"LSCopy_[DestinationServerName]_[DatabaseName]\"",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "CopyScheduleDisabled",
                           "Parameter to set the copy schedule to disabled upon creation.\r\nBy default the schedule is enabled.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "CopyScheduleFrequencyType",
                           "A value indicating when a job is to be executed.\r\nAllowed values are \"Daily\", \"AgentStart\", \"IdleComputer\"",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "CopyScheduleFrequencyInterval",
                           "The number of type periods to occur between each execution of the copy job.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "CopyScheduleFrequencySubdayType",
                           "Specifies the units for the subday FrequencyInterval.\r\nAllowed values are \"Time\", \"Seconds\", \"Minutes\", \"Hours\"",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "CopyScheduleFrequencySubdayInterval",
                           "The number of subday type periods to occur between each execution of the copy job.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "CopyScheduleFrequencyRelativeInterval",
                           "A job\u0027s occurrence of FrequencyInterval in each month, if FrequencyInterval is 32 (monthlyrelative).",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "CopyScheduleFrequencyRecurrenceFactor",
                           "The number of weeks or months between the scheduled execution of a job. FrequencyRecurrenceFactor is used only if FrequencyType is 8, \"Weekly\", 16, \"Monthly\", 32 or \"MonthlyRelative\".",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "CopyScheduleStartDate",
                           "The date on which execution of a job can begin.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "CopyScheduleEndDate",
                           "The date on which execution of a job can stop.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "CopyScheduleStartTime",
                           "The time on any day to begin execution of a job. Format HHMMSS / 24 hour clock.\r\nExample: \u0027010000\u0027 for 01:00:00 AM.\r\nExample: \u0027140000\u0027 for 02:00:00 PM.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "CopyScheduleEndTime",
                           "The time on any day to end execution of a job. Format HHMMSS / 24 hour clock.\r\nExample: \u0027010000\u0027 for 01:00:00 AM.\r\nExample: \u0027140000\u0027 for 02:00:00 PM.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "DisconnectUsers",
                           "If this parameter is set in combinations of standby the users will be disconnected during restore.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "FullBackupPath",
                           "Path to an existing full backup. Use this when an existing backup needs to used to initialize the database on the secondary instance.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "GenerateFullBackup",
                           "If the database is not initialized on the secondary instance it can be done by creating a new full backup and\r\nrestore it for you.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "HistoryRetention",
                           "Is the length of time in minutes in which the history is retained.\r\nThe default value is 14420",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "NoRecovery",
                           "If this parameter is set the database will be in recovery mode. The database will not be readable.\r\nThis setting is default.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "NoInitialization",
                           "If this parameter is set the secondary database will not be initialized.\r\nThe database needs to be on the secondary instance in recovery mode.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "PrimaryMonitorServer",
                           "Is the name of the monitor server for the primary server.\r\nThe default is the name of the primary sql server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "PrimaryMonitorCredential",
                           "Allows you to login to enter a secure credential. Only needs to be used when the PrimaryMonitorServerSecurityMode is 0 or \"sqlserver\"\r\nTo use: $scred = Get-Credential, then pass $scred object to the -PrimaryMonitorCredential parameter.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "PrimaryMonitorServerSecurityMode",
                           "The security mode used to connect to the monitor server for the primary server. Allowed values are 0, \"sqlserver\", 1, \"windows\"\r\nThe default is 1 or Windows.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "PrimaryThresholdAlertEnabled",
                           "Enables the Threshold alert for the primary database",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "RestoreDataFolder",
                           "Folder to be used to restore the database data files. Only used when parameter GenerateFullBackup or UseExistingFullBackup are set.\r\nIf the parameter is not set the default data folder of the secondary instance will be used including the name of the database.\r\nIf the folder is set but doesn\u0027t exist the default data folder of the secondary instance will be used including the name of the database.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "RestoreLogFolder",
                           "Folder to be used to restore the database log files. Only used when parameter GenerateFullBackup or UseExistingFullBackup are set.\r\nIf the parameter is not set the default transaction log folder of the secondary instance will be used.\r\nIf the folder is set but doesn\u0027t exist the default transaction log folder of the secondary instance will be used.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "RestoreDelay",
                           "In case a delay needs to be set for the restore.\r\nThe default is 0.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "RestoreAlertThreshold",
                           "The amount of minutes after which an alert will be raised is no restore has taken place.\r\nThe default is 45 minutes.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "RestoreJob",
                           "Name of the restore job that will be created in the SQL Server agent.\r\nThe parameter works as a prefix where the name of the database will be added to the restore job name.\r\nThe default is \"LSRestore_[databasename]\"",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "RestoreRetention",
                           "The backup retention period in minutes. Default is 4320 / 72 hours",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "RestoreSchedule",
                           "Name of the backup schedule created for the restore job.\r\nThe parameter works as a prefix where the name of the database will be added to the restore job schedule name.\r\nDefault is \"LSRestore_[DestinationServerName]_[DatabaseName]\"",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "RestoreScheduleDisabled",
                           "Parameter to set the restore schedule to disabled upon creation.\r\nBy default the schedule is enabled.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "RestoreScheduleFrequencyType",
                           "A value indicating when a job is to be executed.\r\nAllowed values are \"Daily\", \"AgentStart\", \"IdleComputer\"",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "RestoreScheduleFrequencyInterval",
                           "The number of type periods to occur between each execution of the restore job.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "RestoreScheduleFrequencySubdayType",
                           "Specifies the units for the subday FrequencyInterval.\r\nAllowed values are \"Time\", \"Seconds\", \"Minutes\", \"Hours\"",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "RestoreScheduleFrequencySubdayInterval",
                           "The number of subday type periods to occur between each execution of the restore job.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "RestoreScheduleFrequencyRelativeInterval",
                           "A job\u0027s occurrence of FrequencyInterval in each month, if FrequencyInterval is 32 (monthlyrelative).",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "RestoreScheduleFrequencyRecurrenceFactor",
                           "The number of weeks or months between the scheduled execution of a job. FrequencyRecurrenceFactor is used only if FrequencyType is 8, \"Weekly\", 16, \"Monthly\", 32 or \"MonthlyRelative\".",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "RestoreScheduleStartDate",
                           "The date on which execution of a job can begin.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "RestoreScheduleEndDate",
                           "The date on which execution of a job can stop.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "RestoreScheduleStartTime",
                           "The time on any day to begin execution of a job. Format HHMMSS / 24 hour clock.\r\nExample: \u0027010000\u0027 for 01:00:00 AM.\r\nExample: \u0027140000\u0027 for 02:00:00 PM.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "RestoreScheduleEndTime",
                           "The time on any day to end execution of a job. Format HHMMSS / 24 hour clock.\r\nExample: \u0027010000\u0027 for 01:00:00 AM.\r\nExample: \u0027140000\u0027 for 02:00:00 PM.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "RestoreThreshold",
                           "The number of minutes allowed to elapse between restore operations before an alert is generated.\r\nThe default value = 0",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "SecondaryDatabasePrefix",
                           "The secondary database can be renamed to include a prefix.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SecondaryDatabaseSuffix",
                           "The secondary database can be renamed to include a suffix.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SecondaryMonitorServer",
                           "Is the name of the monitor server for the secondary server.\r\nThe default is the name of the secondary sql server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SecondaryMonitorCredential",
                           "Allows you to login to enter a secure credential. Only needs to be used when the SecondaryMonitorServerSecurityMode is 0 or \"sqlserver\"\r\nTo use: $scred = Get-Credential, then pass $scred object to the -SecondaryMonitorCredential parameter.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SecondaryMonitorServerSecurityMode",
                           "The security mode used to connect to the monitor server for the secondary server. Allowed values are 0, \"sqlserver\", 1, \"windows\"\r\nThe default is 1 or Windows.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SecondaryThresholdAlertEnabled",
                           "Enables the Threshold alert for the secondary database",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Standby",
                           "If this parameter is set the database will be set to standby mode making the database readable.\r\nIf not set the database will be in recovery mode.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "StandbyDirectory",
                           "Directory to place the standby file(s) in",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "UseExistingFullBackup",
                           "If the database is not initialized on the secondary instance it can be done by selecting an existing full backup\r\nand restore it for you.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "UseBackupFolder",
                           "This enables the user to specify a specific backup folder containing one or more backup files to initialize the database on the secondary instance.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Force",
                           "The force parameter will ignore some errors in the parameters and assume defaults.\r\nIt will also remove the any present schedules with the same name for the specific job.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "Use this switch to disable any kind of verbose messages",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Invoke-DbaLogShipping",
        "Author":  "Sander Stad (@sqlstad), sqlstad.nl",
        "Synopsis":  "Invoke-DbaDbLogShipping sets up log shipping for one or more databases",
        "Name":  "Invoke-DbaDbLogShipping",
        "Links":  "https://dbatools.io/Invoke-DbaDbLogShipping",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003e$params = @{\n\u003e\u003e SourceSqlInstance = \u0027sql1\u0027\r\n\u003e\u003e DestinationSqlInstance = \u0027sql2\u0027\r\n\u003e\u003e Database = \u0027db1\u0027\r\n\u003e\u003e BackupNetworkPath= \u0027\\\\sql1\\logshipping\u0027\r\n\u003e\u003e BackupLocalPath= \u0027D:\\Data\\logshipping\u0027\r\n\u003e\u003e BackupScheduleFrequencyType = \u0027daily\u0027\r\n\u003e\u003e BackupScheduleFrequencyInterval = 1\r\n\u003e\u003e CompressBackup = $true\r\n\u003e\u003e CopyScheduleFrequencyType = \u0027daily\u0027\r\n\u003e\u003e CopyScheduleFrequencyInterval = 1\r\n\u003e\u003e GenerateFullBackup = $true\r\n\u003e\u003e RestoreScheduleFrequencyType = \u0027daily\u0027\r\n\u003e\u003e RestoreScheduleFrequencyInterval = 1\r\n\u003e\u003e SecondaryDatabaseSuffix = \u0027DR\u0027\r\n\u003e\u003e CopyDestinationFolder = \u0027\\\\sql2\\logshippingdest\u0027\r\n\u003e\u003e Force = $true\r\n\u003e\u003e }\r\n\u003e\u003e\r\nPS C:\\\u003e Invoke-DbaDbLogShipping @params\nSets up log shipping for database \"db1\" with the backup path to a network share allowing local backups.\r\nIt creates daily schedules for the backup, copy and restore job with all the defaults to be executed every 15 minutes daily.\r\nThe secondary database will be called \"db1_LS\".\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e$params = @{\n\u003e\u003e SourceSqlInstance = \u0027sql1\u0027\r\n\u003e\u003e DestinationSqlInstance = \u0027sql2\u0027\r\n\u003e\u003e Database = \u0027db1\u0027\r\n\u003e\u003e BackupNetworkPath= \u0027\\\\sql1\\logshipping\u0027\r\n\u003e\u003e GenerateFullBackup = $true\r\n\u003e\u003e Force = $true\r\n\u003e\u003e }\r\n\u003e\u003e\r\nPS C:\\\u003e Invoke-DbaDbLogShipping @params\nSets up log shipping with all defaults except that a backup file is generated.\r\nThe script will show a message that the copy destination has not been supplied and asks if you want to use the default which would be the backup directory of the secondary server with the folder \r\n\"logshipping\" i.e. \"D:\\SQLBackup\\Logshiping\".",
        "Syntax":  "Invoke-DbaDbLogShipping [-SourceSqlInstance] \u003cObject\u003e [-DestinationSqlInstance] \u003cObject[]\u003e [[-SourceSqlCredential] \u003cPSCredential\u003e] [[-SourceCredential] \u003cPSCredential\u003e] [[-DestinationSqlCredential] \u003cPSCredential\u003e] [[-DestinationCredential] \u003cPSCredential\u003e] [-Database] \u003cObject[]\u003e [-BackupNetworkPath] \u003cString\u003e [[-BackupLocalPath] \u003cString\u003e] [[-BackupJob] \u003cString\u003e] [[-BackupRetention] \u003cInt32\u003e] [[-BackupSchedule] \u003cString\u003e] [-BackupScheduleDisabled] [[-BackupScheduleFrequencyType] \u003cObject\u003e] [[-BackupScheduleFrequencyInterval] \u003cObject[]\u003e] [[-BackupScheduleFrequencySubdayType] \u003cObject\u003e] \r\n[[-BackupScheduleFrequencySubdayInterval] \u003cInt32\u003e] [[-BackupScheduleFrequencyRelativeInterval] \u003cObject\u003e] [[-BackupScheduleFrequencyRecurrenceFactor] \u003cInt32\u003e] [[-BackupScheduleStartDate] \u003cString\u003e] [[-BackupScheduleEndDate] \u003cString\u003e] [[-BackupScheduleStartTime] \u003cString\u003e] [[-BackupScheduleEndTime] \u003cString\u003e] [[-BackupThreshold] \u003cInt32\u003e] [-CompressBackup] [[-CopyDestinationFolder] \u003cString\u003e] [[-CopyJob] \u003cString\u003e] [[-CopyRetention] \u003cInt32\u003e] [[-CopySchedule] \u003cString\u003e] [-CopyScheduleDisabled] [[-CopyScheduleFrequencyType] \u003cObject\u003e] [[-CopyScheduleFrequencyInterval] \u003cObject[]\u003e] \r\n[[-CopyScheduleFrequencySubdayType] \u003cObject\u003e] [[-CopyScheduleFrequencySubdayInterval] \u003cInt32\u003e] [[-CopyScheduleFrequencyRelativeInterval] \u003cObject\u003e] [[-CopyScheduleFrequencyRecurrenceFactor] \u003cInt32\u003e] [[-CopyScheduleStartDate] \u003cString\u003e] [[-CopyScheduleEndDate] \u003cString\u003e] [[-CopyScheduleStartTime] \u003cString\u003e] [[-CopyScheduleEndTime] \u003cString\u003e] [-DisconnectUsers] [[-FullBackupPath] \u003cString\u003e] [-GenerateFullBackup] [[-HistoryRetention] \u003cInt32\u003e] [-NoRecovery] [-NoInitialization] [[-PrimaryMonitorServer] \u003cString\u003e] [[-PrimaryMonitorCredential] \u003cPSCredential\u003e] [[-PrimaryMonitorServerSecurityMode] \u003cObject\u003e] \r\n[-PrimaryThresholdAlertEnabled] [[-RestoreDataFolder] \u003cString\u003e] [[-RestoreLogFolder] \u003cString\u003e] [[-RestoreDelay] \u003cInt32\u003e] [[-RestoreAlertThreshold] \u003cInt32\u003e] [[-RestoreJob] \u003cString\u003e] [[-RestoreRetention] \u003cInt32\u003e] [[-RestoreSchedule] \u003cString\u003e] [-RestoreScheduleDisabled] [[-RestoreScheduleFrequencyType] \u003cObject\u003e] [[-RestoreScheduleFrequencyInterval] \u003cObject[]\u003e] [[-RestoreScheduleFrequencySubdayType] \u003cObject\u003e] [[-RestoreScheduleFrequencySubdayInterval] \u003cInt32\u003e] [[-RestoreScheduleFrequencyRelativeInterval] \u003cObject\u003e] [[-RestoreScheduleFrequencyRecurrenceFactor] \u003cInt32\u003e] [[-RestoreScheduleStartDate] \r\n\u003cString\u003e] [[-RestoreScheduleEndDate] \u003cString\u003e] [[-RestoreScheduleStartTime] \u003cString\u003e] [[-RestoreScheduleEndTime] \u003cString\u003e] [[-RestoreThreshold] \u003cInt32\u003e] [[-SecondaryDatabasePrefix] \u003cString\u003e] [[-SecondaryDatabaseSuffix] \u003cString\u003e] [[-SecondaryMonitorServer] \u003cString\u003e] [[-SecondaryMonitorCredential] \u003cPSCredential\u003e] [[-SecondaryMonitorServerSecurityMode] \u003cObject\u003e] [-SecondaryThresholdAlertEnabled] [-Standby] [[-StandbyDirectory] \u003cString\u003e] [-UseExistingFullBackup] [[-UseBackupFolder] \u003cString\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Invoke-DbaDbLogShipRecovery",
        "Description":  "By default all the databases for a particular instance are recovered.\nIf the database is in the right state, either standby or recovering, the process will try to recover the database.\n\nAt first the function will check if the backup source directory can still be reached.\nIf so it will look up the last transaction log backup for the database. If that backup file is not the last copied file the log shipping copy job will be started.\nIf the directory cannot be reached for the function will continue to the restoring process.\nAfter the copy job check is performed the job is disabled to prevent the job to run.\n\nFor the restore the log shipping status is checked in the msdb database.\nIf the last restored file is not the same as the last file name found, the log shipping restore job will be executed.\nAfter the restore job check is performed the job is disabled to prevent the job to run\n\nThe last part is to set the database online by restoring the databases with recovery",
        "Tags":  "LogShipping",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Database to perform the restore for. This value can also be piped enabling multiple databases to be recovered.\r\nIf this value is not supplied all databases will be recovered.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "NoRecovery",
                           "Allows you to choose to not restore the database to a functional state (Normal) in the final steps of the process.\r\nBy default the database is restored to a functional state (Normal).",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Force",
                           "Use this parameter to force the function to continue and perform any adjusting actions to successfully execute",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "InputObject",
                           "Allows piped input from Get-DbaDatabase",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Delay",
                           "Set the delay in seconds to wait for the copy and/or restore jobs.\r\nBy default the delay is 5 seconds",
                           "",
                           false,
                           "false",
                           "5"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Invoke-DbaLogShippingRecovery",
        "Author":  "Sander Stad (@sqlstad), sqlstad.nl",
        "Synopsis":  "Invoke-DbaDbLogShipRecovery recovers log shipped databases to a normal state to act upon a migration or disaster.",
        "Name":  "Invoke-DbaDbLogShipRecovery",
        "Links":  "https://dbatools.io/Invoke-DbaDbLogShipRecovery",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eInvoke-DbaDbLogShipRecovery -SqlInstance server1\nRecovers all the databases on the instance that are enabled for log shipping\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eInvoke-DbaDbLogShipRecovery -SqlInstance server1 -SqlCredential $cred -Verbose\nRecovers all the databases on the instance that are enabled for log shipping using a credential\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eInvoke-DbaDbLogShipRecovery -SqlInstance server1 -database db_logship -Verbose\nRecovers the database \"db_logship\" to a normal status\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003edb1, db2, db3, db4 | Invoke-DbaDbLogShipRecovery -SqlInstance server1 -Verbose\nRecovers the database db1, db2, db3, db4 to a normal status\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eInvoke-DbaDbLogShipRecovery -SqlInstance server1 -WhatIf\nShows what would happen if the command were executed.",
        "Syntax":  "Invoke-DbaDbLogShipRecovery [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-Database] \u003cString[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [-NoRecovery] [-EnableException] [-Force] [[-InputObject] \u003cDatabase[]\u003e] [[-Delay] \u003cInt32\u003e] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Invoke-DbaDbMirrorFailover",
        "Description":  "Failover a mirrored database",
        "Tags":  [
                     "Mirror",
                     "HA"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "SQL Server name or SMO object representing the primary SQL Server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the primary instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database or databases to mirror",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Allows piping from Get-DbaDatabase",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Force",
                           "Force Failover and allow data loss",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Failover a mirrored database",
        "Name":  "Invoke-DbaDbMirrorFailover",
        "Links":  "https://dbatools.io/Invoke-DbaDbMirrorFailover",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eInvoke-DbaDbMirrorFailover -SqlInstance sql2016 -Database pubs\nFails over the pubs database on sql2016. Prompts for confirmation.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDatabase -SqlInstance sql2016 -Database pubs | Invoke-DbaDbMirrorFailover -Force -Confirm:$false\nForces the failover of the pubs database on sql2016 and allows data loss.\r\nDoes not prompt for confirmation.",
        "Syntax":  "Invoke-DbaDbMirrorFailover [[-SqlInstance] \u003cDbaInstanceParameter\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cString[]\u003e] [[-InputObject] \u003cDatabase[]\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Invoke-DbaDbMirroring",
        "Description":  "Automates the creation of database mirrors.\n\n* Verifies that a mirror is possible\n* Sets the recovery model to Full if needed\n* If the database does not exist on mirror or witness, a backup/restore is performed\n* Sets up endpoints if necessary\n* Creates a login and grants permissions to service accounts if needed\n* Starts endpoints if needed\n* Sets up partner for mirror\n* Sets up partner for primary\n* Sets up witness if one is specified\n\nNOTE: If a backup / restore is performed, the backups will be left in tact on the network share.",
        "Tags":  [
                     "Mirror",
                     "HA"
                 ],
        "Params":  [
                       [
                           "Primary",
                           "SQL Server name or SMO object representing the primary SQL Server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "PrimarySqlCredential",
                           "Login to the primary instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Mirror",
                           "SQL Server name or SMO object representing the mirror SQL Server.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "MirrorSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Witness",
                           "SQL Server name or SMO object representing the witness SQL Server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "WitnessSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database or databases to mirror.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SharedPath",
                           "The network share where the backups will be backed up and restored from.\nEach SQL Server service account must have access to this share.\nNOTE: If a backup / restore is performed, the backups will be left in tact on the network share.",
                           "NetworkShare",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Enables piping from Get-DbaDatabase.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "UseLastBackup",
                           "Use the last full backup of database.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Force",
                           "Drop and recreate the database on remote servers using fresh backup.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Automates the creation of database mirrors.",
        "Name":  "Invoke-DbaDbMirroring",
        "Links":  "https://dbatools.io/Invoke-DbaDbMirroring",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003e$params = @{\n\u003e\u003e Primary = \u0027sql2017a\u0027\r\n\u003e\u003e Mirror = \u0027sql2017b\u0027\r\n\u003e\u003e MirrorSqlCredential = \u0027sqladmin\u0027\r\n\u003e\u003e Witness = \u0027sql2019\u0027\r\n\u003e\u003e Database = \u0027pubs\u0027\r\n\u003e\u003e SharedPath = \u0027\\\\nas\\sql\\share\u0027\r\n\u003e\u003e }\r\n\u003e\u003e\r\nPS C:\\\u003e Invoke-DbaDbMirror @params\nPerforms a bunch of checks to ensure the pubs database on sql2017a\r\ncan be mirrored from sql2017a to sql2017b. Logs in to sql2019 and sql2017a\r\nusing Windows credentials and sql2017b using a SQL credential.\nPrompts for confirmation for most changes. To avoid confirmation, use -Confirm:$false or\r\nuse the syntax in the second example.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e$params = @{\n\u003e\u003e Primary = \u0027sql2017a\u0027\r\n\u003e\u003e Mirror = \u0027sql2017b\u0027\r\n\u003e\u003e MirrorSqlCredential = \u0027sqladmin\u0027\r\n\u003e\u003e Witness = \u0027sql2019\u0027\r\n\u003e\u003e Database = \u0027pubs\u0027\r\n\u003e\u003e SharedPath = \u0027\\\\nas\\sql\\share\u0027\r\n\u003e\u003e Force = $true\r\n\u003e\u003e Confirm = $false\r\n\u003e\u003e }\r\n\u003e\u003e\r\nPS C:\\\u003e Invoke-DbaDbMirror @params\nPerforms a bunch of checks to ensure the pubs database on sql2017a\r\ncan be mirrored from sql2017a to sql2017b. Logs in to sql2019 and sql2017a\r\nusing Windows credentials and sql2017b using a SQL credential.\nDrops existing pubs database on Mirror and Witness and restores them with\r\na fresh backup.\nDoes all the things in the decription, does not prompt for confirmation.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003e$map = @{ \u0027database_data\u0027 = \u0027M:\\Data\\database_data.mdf\u0027 \u0027database_log\u0027 = \u0027L:\\Log\\database_log.ldf\u0027 }\nPS C:\\\u003e Get-ChildItem \\\\nas\\seed | Restore-DbaDatabase -SqlInstance sql2017b -FileMapping $map -NoRecovery\r\nPS C:\\\u003e Get-DbaDatabase -SqlInstance sql2017a -Database pubs | Invoke-DbaDbMirroring -Mirror sql2017b -Confirm:$false\nRestores backups from sql2017a to a specific file struture on sql2017b then creates mirror with no prompts for confirmation.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaDatabase -SqlInstance sql2017a -Database pubs |\n\u003e\u003e Invoke-DbaDbMirroring -Mirror sql2017b -UseLastBackup -Confirm:$false\nMirrors pubs on sql2017a to sql2017b and uses the last full and logs from sql2017a to seed. Doesn\u0027t prompt for confirmation.",
        "Syntax":  "Invoke-DbaDbMirroring [[-Primary] \u003cDbaInstanceParameter\u003e] [[-PrimarySqlCredential] \u003cPSCredential\u003e] [-Mirror] \u003cDbaInstanceParameter[]\u003e [[-MirrorSqlCredential] \u003cPSCredential\u003e] [[-Witness] \u003cDbaInstanceParameter\u003e] [[-WitnessSqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cString[]\u003e] [[-SharedPath] \u003cString\u003e] [[-InputObject] \u003cDatabase[]\u003e] [-UseLastBackup] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Invoke-DbaDbShrink",
        "Description":  "Shrinks all files in a database. Databases should be shrunk only when completely necessary.\n\nMany awesome SQL people have written about why you should not shrink your data files. Paul Randal and Kalen Delaney wrote great posts about this topic:\n\nhttp://www.sqlskills.com/blogs/paul/why-you-should-not-shrink-your-data-files\nhttp://sqlmag.com/sql-server/shrinking-data-files\n\nHowever, there are some cases where a database will need to be shrunk. In the event that you must shrink your database:\n\n1. Ensure you have plenty of space for your T-Log to grow\n2. Understand that shrinks require a lot of CPU and disk resources\n3. Consider running DBCC INDEXDEFRAG or ALTER INDEX ... REORGANIZE after the shrink is complete.",
        "Tags":  [
                     "Shrink",
                     "Database"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. Defaults to the default instance on localhost.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential).",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AllUserDatabases",
                           "Run command against all user databases.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "PercentFreeSpace",
                           "Specifies how much free space to leave, defaults to 0.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "ShrinkMethod",
                           "Specifies the method that is used to shrink the database\r\nDefault\r\nData in pages located at the end of a file is moved to pages earlier in the file. Files are truncated to reflect allocated space.\r\nEmptyFile\r\nMigrates all of the data from the referenced file to other files in the same filegroup. (DataFile and LogFile objects only).\r\nNoTruncate\r\nData in pages located at the end of a file is moved to pages earlier in the file.\r\nTruncateOnly\r\nData distribution is not affected. Files are truncated to reflect allocated space, recovering free space at the end of any file.",
                           "",
                           false,
                           "false",
                           "Default"
                       ],
                       [
                           "FileType",
                           "Specifies the files types that will be shrunk\r\nAll - All Data and Log files are shrunk, using database shrink (Default)\r\nData - Just the Data files are shrunk using file shrink\r\nLog - Just the Log files are shrunk using file shrink",
                           "",
                           false,
                           "false",
                           "All"
                       ],
                       [
                           "StepSize",
                           "Measured in bits - but no worries! PowerShell has a very cool way of formatting bits. Just specify something like: 1MB or 10GB. See the examples for more information.\nIf specified, this will chunk a larger shrink operation into multiple smaller shrinks.\r\nIf shrinking a file by a large amount there are benefits of doing multiple smaller chunks.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "StatementTimeout",
                           "Timeout in minutes. Defaults to infinity (shrinks can take a while).",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "LogsOnly",
                           "Deprecated. Use FileType instead.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "ExcludeIndexStats",
                           "Exclude statistics about fragmentation.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "ExcludeUpdateUsage",
                           "Exclude DBCC UPDATE USAGE for database.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts for confirmation of every step. For example:\nAre you sure you want to perform this action?\r\nPerforming the operation \"Shrink database\" on target \"pubs on SQL2016\\VNEXT\".\r\n[Y] Yes  [A] Yes to All  [N] No  [L] No to All  [S] Suspend  [?] Help (default is \"Y\"):",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Invoke-DbaDatabaseShrink",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Shrinks all files in a database. This is a command that should rarely be used.\n\n- Shrinks can cause severe index fragmentation (to the tune of 99%)\n- Shrinks can cause massive growth in the database\u0027s transaction log\n- Shrinks can require a lot of time and system resources to perform data movement",
        "Name":  "Invoke-DbaDbShrink",
        "Links":  "https://dbatools.io/Invoke-DbaDbShrink",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eInvoke-DbaDbShrink -SqlInstance sql2016 -Database Northwind,pubs,Adventureworks2014\nShrinks Northwind, pubs and Adventureworks2014 to have as little free space as possible.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eInvoke-DbaDbShrink -SqlInstance sql2014 -Database AdventureWorks2014 -PercentFreeSpace 50\nShrinks AdventureWorks2014 to have 50% free space. So let\u0027s say AdventureWorks2014 was 1GB and it\u0027s using 100MB space. The database free space would be reduced to 50MB.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eInvoke-DbaDbShrink -SqlInstance sql2014 -Database AdventureWorks2014 -PercentFreeSpace 50 -FileType Data -StepSize 25MB\nShrinks AdventureWorks2014 to have 50% free space, runs shrinks in 25MB chunks for improved performance.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eInvoke-DbaDbShrink -SqlInstance sql2012 -AllUserDatabases\nShrinks all databases on SQL2012 (not ideal for production)",
        "Syntax":  "Invoke-DbaDbShrink [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [-AllUserDatabases] [[-PercentFreeSpace] \u003cInt32\u003e] [[-ShrinkMethod] \u003cString\u003e] [[-FileType] \u003cString\u003e] [[-StepSize] \u003cInt32\u003e] [[-StatementTimeout] \u003cInt32\u003e] [-LogsOnly] [-ExcludeIndexStats] [-ExcludeUpdateUsage] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Invoke-DbaDbUpgrade",
        "Description":  "Updates compatibility level, then runs CHECKDB with data_purity, DBCC updateusage, sp_updatestats and finally sp_refreshview against all user views.",
        "Tags":  [
                     "Shrink",
                     "Database"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "SqlCredential object used to connect to the SQL Server as a different user.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process - this list is autopopulated from the server. If unspecified, all databases will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is autopopulated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "NoCheckDb",
                           "Skip checkdb",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "NoUpdateUsage",
                           "Skip usage update",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "NoUpdateStats",
                           "Skip stats update",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "NoRefreshView",
                           "Skip view update",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "AllUserDatabases",
                           "Run command against all user databases",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Force",
                           "Don\u0027t skip over databases that are already at the same level the instance is",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "InputObject",
                           "A collection of databases (such as returned by Get-DbaDatabase)",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts for confirmation of every step. For example:\nAre you sure you want to perform this action?\r\nPerforming the operation \"Update database\" on target \"pubs on SQL2016\\VNEXT\".\r\n[Y] Yes  [A] Yes to All  [N] No  [L] No to All  [S] Suspend  [?] Help (default is \"Y\"):",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Invoke-DbaDatabaseUpgrade",
        "Author":  "Stephen Bennett, https://sqlnotesfromtheunderground.wordpress.com/",
        "Synopsis":  "Take a database and upgrades it to compatibility of the SQL Instance its hosted on. Based on https://thomaslarock.com/2014/06/upgrading-to-sql-server-2014-a-dozen-things-to-check/",
        "Name":  "Invoke-DbaDbUpgrade",
        "Links":  "https://dbatools.io/Invoke-DbaDbUpgrade",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eInvoke-DbaDbUpgrade -SqlInstance PRD-SQL-MSD01 -Database Test\nRuns the below processes against the databases\r\n-- Puts compatibility of database to level of SQL Instance\r\n-- Runs CHECKDB DATA_PURITY\r\n-- Runs DBCC UPDATESUSAGE\r\n-- Updates all users statistics\r\n-- Runs sp_refreshview against every view in the database\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eInvoke-DbaDbUpgrade -SqlInstance PRD-SQL-INT01 -Database Test -NoRefreshView\nRuns the upgrade command skipping the sp_refreshview update on all views\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eInvoke-DbaDbUpgrade -SqlInstance PRD-SQL-INT01 -Database Test -Force\nIf database Test is already at the correct compatibility, runs every necessary step\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaDatabase -SqlInstance sql2016 | Out-GridView -Passthru | Invoke-DbaDbUpgrade\nGet only specific databases using GridView and pass those to Invoke-DbaDbUpgrade",
        "Syntax":  "Invoke-DbaDbUpgrade [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [-SqlCredential \u003cPSCredential\u003e] [-Database \u003cObject[]\u003e] [-ExcludeDatabase \u003cObject[]\u003e] [-NoCheckDb] [-NoUpdateUsage] [-NoUpdateStats] [-NoRefreshView] [-AllUserDatabases] [-Force] [-InputObject \u003cDatabase[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Invoke-DbaDiagnosticQuery",
        "Description":  "This is the main function of the Sql Server Diagnostic Queries related functions in dbatools.\nThe diagnostic queries are developed and maintained by Glenn Berry and they can be found here along with a lot of documentation:\nhttp://www.sqlskills.com/blogs/glenn/category/dmv-queries/\n\nThe most recent version of the diagnostic queries are included in the dbatools module.\nBut it is possible to download a newer set or a specific version to an alternative location and parse and run those scripts.\nIt will run all or a selection of those scripts on one or multiple servers and return the result as a PowerShell Object",
        "Tags":  [
                     "Database",
                     "DMV"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. Can be either a string or SMO server",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process. If unspecified, all databases will be processed",
                           "DatabaseName",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeQuery",
                           "The Queries to exclude",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows alternative Windows or SQL login credentials to be used",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Path",
                           "Alternate path for the diagnostic scripts",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "QueryName",
                           "Only run specific query",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "UseSelectionHelper",
                           "Provides a gridview with all the queries to choose from and will run the selection made by the user on the Sql Server instance specified.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "InstanceOnly",
                           "Run only instance level queries",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "DatabaseSpecific",
                           "Run only database level queries",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "ExcludeQueryTextColumn",
                           "Use this switch to exclude the [Complete Query Text] column from relevant queries",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "ExcludePlanColumn",
                           "Use this switch to exclude the [Query Plan] column from relevant queries",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "NoColumnParsing",
                           "Does not parse the [Complete Query Text] and [Query Plan] columns and disregards the ExcludeQueryTextColumn and NoColumnParsing switches",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "OutputPath",
                           "Directory to parsed diagnostict queries to. This will split them based on server, databasename, and query.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExportQueries",
                           "Use this switch to export the diagnostic queries to sql files. I\r\nnstead of running the queries, the server will be evaluated to find the appropriate queries to run based on SQL Version.\r\nThese sql files will then be created in the OutputDirectory",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command would execute, but does not actually perform the command",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts to confirm certain actions",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Andre Kamman (@AndreKamman), http://clouddba.io",
        "Synopsis":  "Invoke-DbaDiagnosticQuery runs the scripts provided by Glenn Berry\u0027s DMV scripts on specified servers",
        "Name":  "Invoke-DbaDiagnosticQuery",
        "Links":  "https://dbatools.io/Invoke-DbaDiagnosticQuery",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eInvoke-DbaDiagnosticQuery -SqlInstance sql2016\nRun the selection made by the user on the Sql Server instance specified.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eInvoke-DbaDiagnosticQuery -SqlInstance sql2016 -UseSelectionHelper | Export-DbaDiagnosticQuery -Path C:\\temp\\gboutput\nProvides a gridview with all the queries to choose from and will run the selection made by the user on the SQL Server instance specified.\r\nThen it will export the results to Export-DbaDiagnosticQuery.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eInvoke-DbaDiagnosticQuery -sqlinstance localhost -ExportQueries -outputpath \"C:\\temp\\DiagnosticQueries\"\nExport All Queries to Disk\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eInvoke-DbaDiagnosticQuery -sqlinstance localhost -DatabaseSpecific -DatabaseName \u0027tempdb\u0027 -ExportQueries -outputpath \"C:\\temp\\DiagnosticQueries\"\nExport Database Specific Queries for all User Dbs\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eInvoke-DbaDiagnosticQuery -sqlinstance localhost -DatabaseSpecific -DatabaseName \u0027tempdb\u0027 -ExportQueries -outputpath \"C:\\temp\\DiagnosticQueries\"\nExport Database Specific Queries For One Target Database\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eInvoke-DbaDiagnosticQuery -sqlinstance localhost -DatabaseSpecific -DatabaseName \u0027tempdb\u0027 -ExportQueries -outputpath \"C:\\temp\\DiagnosticQueries\" -queryname \u0027Database-scoped Configurations\u0027\nExport Database Specific Queries For One Target Database and One Specific Query\n-------------------------- EXAMPLE 7 --------------------------\nPS C:\\\u003eInvoke-DbaDiagnosticQuery -sqlinstance localhost -UseSelectionHelper\nChoose Queries To Export\n-------------------------- EXAMPLE 8 --------------------------\nPS C:\\\u003e[PSObject[]]$results = Invoke-DbaDiagnosticQuery -SqlInstance localhost -whatif\nParse the appropriate diagnostic queries by connecting to server, and instead of running them, return as [PSCustomObject[]] to work with further\n-------------------------- EXAMPLE 9 --------------------------\nPS C:\\\u003e$results = Invoke-DbaDiagnosticQuery -SqlInstance Sql2017 -DatabaseSpecific -queryname \u0027Database-scoped Configurations\u0027 -databasename TestStuff\nRun diagnostic queries targeted at specific database, and only run database level queries against this database.",
        "Syntax":  "Invoke-DbaDiagnosticQuery [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-Database \u003cObject[]\u003e] [-ExcludeDatabase \u003cObject[]\u003e] [-ExcludeQuery \u003cObject[]\u003e] [-SqlCredential \u003cPSCredential\u003e] [-Path \u003cFileInfo\u003e] [-QueryName \u003cString[]\u003e] [-UseSelectionHelper] [-InstanceOnly] [-DatabaseSpecific] [-ExcludeQueryTextColumn] [-ExcludePlanColumn] [-NoColumnParsing] [-OutputPath \u003cString\u003e] [-ExportQueries] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Invoke-DbaPfRelog",
        "Description":  "Pipeline-compatible wrapper for the relog command. Relog is useful for converting Windows Perfmon.\n\nExtracts performance counters from performance counter logs into other formats,\nsuch as text-TSV (for tab-delimited text), text-CSV (for comma-delimited text), binary-BIN, or SQL.\n\n`relog \"C:\\PerfLogs\\Admin\\System Correlation\\WORKSTATIONX_20180112-000001\\DataCollector01.blg\" -o C:\\temp\\foo.csv -f tsv`\n\nIf you find any input hangs, please send us the output so we can accommodate for it then use -Raw for an immediate solution.",
        "Tags":  [
                     "Performance",
                     "DataCollector",
                     "PerfCounter",
                     "Relog"
                 ],
        "Params":  [
                       [
                           "Path",
                           "Specifies the pathname of an existing performance counter log or performance counter path. You can specify multiple input files.",
                           "FullName",
                           false,
                           "true (ByPropertyName)",
                           ""
                       ],
                       [
                           "Destination",
                           "Specifies the pathname of the output file or SQL database where the counters will be written. Defaults to the same directory as the source.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Type",
                           "The output format. Defaults to tsv. Options include tsv, csv, bin, and sql.\nFor a SQL database, the output file specifies the DSN!counter_log. You can specify the database location by using the ODBC manager to configure the DSN (Database System Name).\nFor more information, read here: https://technet.microsoft.com/en-us/library/bb490958.aspx",
                           "",
                           false,
                           "false",
                           "tsv"
                       ],
                       [
                           "Append",
                           "If this switch is enabled, output will be appended to the specified file instead of overwriting. This option does not apply to SQL format where the default is always to append.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "AllowClobber",
                           "If this switch is enabled, the destination file will be overwritten if it exists.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "PerformanceCounter",
                           "Specifies the performance counter path to log.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "PerformanceCounterPath",
                           "Specifies the pathname of the text file that lists the performance counters to be included in a relog file. Use this option to list counter paths in an input file, one per line. Default setting is \r\nall counters in the original log file are relogged.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Interval",
                           "Specifies sample intervals in \"n\" records. Includes every nth data point in the relog file. Default is every data point.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "BeginTime",
                           "This is is Get-Date object and we format it for you.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EndTime",
                           "Specifies end time for copying last record from the input file. This is is Get-Date object and we format it for you.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ConfigPath",
                           "Specifies the pathname of the settings file that contains command-line parameters.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Summary",
                           "If this switch is enabled, the performance counters and time ranges of log files specified in the input file will be displayed.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "InputObject",
                           "Accepts the output of Get-DbaPfDataCollector and Get-DbaPfDataCollectorSet as input via the pipeline.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Multithread",
                           "If this switch is enabled, processing will be done in parallel. This may speed up large batches or large files.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "AllTime",
                           "If this switch is enabled and a datacollector or datacollectorset is passed in via the pipeline, collects all logs, not just the latest.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Raw",
                           "If this switch is enabled, the results of the DOS command instead of Get-ChildItem will be displayed. This does not run in parallel.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Pipeline-compatible wrapper for the relog command which is available on modern Windows platforms.",
        "Name":  "Invoke-DbaPfRelog",
        "Links":  "https://dbatools.io/Invoke-DbaPfRelog",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eInvoke-DbaPfRelog -Path C:\\temp\\perfmon.blg\nCreates C:\\temp\\perfmon.tsv from C:\\temp\\perfmon.blg.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eInvoke-DbaPfRelog -Path C:\\temp\\perfmon.blg -Destination C:\\temp\\a\\b\\c\nCreates the temp, a, and b directories if needed, then generates c.tsv (tab separated) from C:\\temp\\perfmon.blg.\nReturns the newly created file as a file object.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaPfDataCollectorSet -ComputerName sql2016 | Get-DbaPfDataCollector | Invoke-DbaPfRelog -Destination C:\\temp\\perf\nCreates C:\\temp\\perf if needed, then generates computername-datacollectorname.tsv (tab separated) from the latest logs of all data collector sets on sql2016. This destination format was chosen to \r\navoid naming conflicts with piped input.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eInvoke-DbaPfRelog -Path C:\\temp\\perfmon.blg -Destination C:\\temp\\a\\b\\c -Raw\n```\r\n[Invoke-DbaPfRelog][21:21:35] relog \"C:\\temp\\perfmon.blg\" -f csv -o C:\\temp\\a\\b\\c\nInput\r\n----------------\r\nFile(s):\r\nC:\\temp\\perfmon.blg (Binary)\nBegin:    1/13/2018 5:13:23\r\nEnd:      1/13/2018 14:29:55\r\nSamples:  2227\n100.00%\nOutput\r\n----------------\r\nFile:     C:\\temp\\a\\b\\c.csv\nBegin:    1/13/2018 5:13:23\r\nEnd:      1/13/2018 14:29:55\r\nSamples:  2227\nThe command completed successfully.\r\n```\nCreates the temp, a, and b directories if needed, then generates c.tsv (tab separated) from C:\\temp\\perfmon.blg then outputs the raw results of the relog command.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eInvoke-DbaPfRelog -Path \u0027C:\\temp\\perflog with spaces.blg\u0027 -Destination C:\\temp\\a\\b\\c -Type csv -BeginTime ((Get-Date).AddDays(-30)) -EndTime ((Get-Date).AddDays(-1))\nCreates the temp, a, and b directories if needed, then generates c.csv (comma separated) from C:\\temp\\perflog with spaces.blg\u0027, starts 30 days ago and ends one day ago.\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003e$servers | Get-DbaPfDataCollectorSet | Get-DbaPfDataCollector | Invoke-DbaPfRelog -Multithread -AllowClobber\nRelogs latest data files from all collectors within the servers listed in $servers.\n-------------------------- EXAMPLE 7 --------------------------\nPS C:\\\u003eGet-DbaPfDataCollector -Collector DataCollector01 | Invoke-DbaPfRelog -AllowClobber -AllTime\nRelogs all the log files from the DataCollector01 on the local computer and allows overwrite.",
        "Syntax":  "Invoke-DbaPfRelog [[-Path] \u003cString[]\u003e] [[-Destination] \u003cString\u003e] [[-Type] \u003cString\u003e] [-Append] [-AllowClobber] [[-PerformanceCounter] \u003cString[]\u003e] [[-PerformanceCounterPath] \u003cString\u003e] [[-Interval] \u003cInt32\u003e] [[-BeginTime] \u003cDateTime\u003e] [[-EndTime] \u003cDateTime\u003e] [[-ConfigPath] \u003cString\u003e] [-Summary] [[-InputObject] \u003cObject[]\u003e] [-Multithread] [-AllTime] [-Raw] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Invoke-DbaQuery",
        "Description":  "This function is a wrapper command around Invoke-DbaAsync, which in turn is based on Invoke-SqlCmd2.\nIt was designed to be more convenient to use in a pipeline and to behave in a way consistent with the rest of our functions.",
        "Tags":  [
                     "Database",
                     "Query"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.",
                           "ServerInstance,SqlServer",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Credential object used to connect to the SQL Server Instance as a different user. This can be a Windows or SQL Server account. Windows users are determined by the existence of a backslash, so if you \r\nare intending to use an alternative Windows connection instead of a SQL login, ensure it contains a backslash.",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database to select before running the query. This list is auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Query",
                           "Specifies one or more queries to be run. The queries can be Transact-SQL, XQuery statements, or sqlcmd commands. Multiple queries in a single batch may be separated by a semicolon or a GO\nEscape any double quotation marks included in the string.\nConsider using bracketed identifiers such as [MyTable] instead of quoted identifiers such as \"MyTable\".",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "QueryTimeout",
                           "Specifies the number of seconds before the queries time out.",
                           "",
                           false,
                           "false",
                           "600"
                       ],
                       [
                           "File",
                           "Specifies the path to one or several files to be used as the query input.",
                           "InputFile",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SqlObject",
                           "Specify on or multiple SQL objects. Those will be converted to script and their scripts run on the target system(s).",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "As",
                           "Specifies output type. Valid options for this parameter are \u0027DataSet\u0027, \u0027DataTable\u0027, \u0027DataRow\u0027, \u0027PSObject\u0027, and \u0027SingleValue\u0027\nPSObject output introduces overhead but adds flexibility for working with results: http://powershell.org/wp/forums/topic/dealing-with-dbnull/",
                           "",
                           false,
                           "false",
                           "DataRow"
                       ],
                       [
                           "SqlParameters",
                           "Specifies a hashtable of parameters for parameterized SQL queries.  http://blog.codinghorror.com/give-me-parameterized-sql-or-give-me-death/",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AppendServerInstance",
                           "If this switch is enabled, the SQL Server instance will be appended to PSObject and DataRow output.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "MessagesToOutput",
                           "Use this switch to have on the output stream messages too (e.g. PRINT statements). Output will hold the resultset too. See examples for detail",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "InputObject",
                           "A collection of databases (such as returned by Get-DbaDatabase)",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Invoke-DbaCmd,Invoke-DbaSqlQuery",
        "Author":  "Friedrich Weinmann (@FredWeinmann)",
        "Synopsis":  "A command to run explicit T-SQL commands or files.",
        "Name":  "Invoke-DbaQuery",
        "Links":  "https://dbatools.io/Invoke-DbaQuery",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eInvoke-DbaQuery -SqlInstance server\\instance -Query \u0027SELECT foo FROM bar\u0027\nRuns the sql query \u0027SELECT foo FROM bar\u0027 against the instance \u0027server\\instance\u0027\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaCmsRegServer -SqlInstance [SERVERNAME] -Group [GROUPNAME] | Invoke-DbaQuery -Query \u0027SELECT foo FROM bar\u0027\nRuns the sql query \u0027SELECT foo FROM bar\u0027 against all instances in the group [GROUPNAME] on the CMS [SERVERNAME]\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003e\"server1\", \"server1\\nordwind\", \"server2\" | Invoke-DbaQuery -File \"C:\\scripts\\sql\\rebuild.sql\"\nRuns the sql commands stored in rebuild.sql against the instances \"server1\", \"server1\\nordwind\" and \"server2\"\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaDatabase -SqlInstance \"server1\", \"server1\\nordwind\", \"server2\" | Invoke-DbaQuery -File \"C:\\scripts\\sql\\rebuild.sql\"\nRuns the sql commands stored in rebuild.sql against all accessible databases of the instances \"server1\", \"server1\\nordwind\" and \"server2\"",
        "Syntax":  "Invoke-DbaQuery [-SqlInstance \u003cDbaInstanceParameter[]\u003e] [-SqlCredential \u003cPSCredential\u003e] [-Database \u003cString\u003e] [-Query] \u003cString\u003e [-QueryTimeout \u003cInt32\u003e] [-As \u003cString\u003e] [-SqlParameters \u003cIDictionary\u003e] [-AppendServerInstance] [-MessagesToOutput] [-InputObject \u003cDatabase[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]\nInvoke-DbaQuery [-SqlInstance \u003cDbaInstanceParameter[]\u003e] [-SqlCredential \u003cPSCredential\u003e] [-Database \u003cString\u003e] [-QueryTimeout \u003cInt32\u003e] -File \u003cObject[]\u003e [-As \u003cString\u003e] [-SqlParameters \u003cIDictionary\u003e] [-AppendServerInstance] [-MessagesToOutput] [-InputObject \u003cDatabase[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]\nInvoke-DbaQuery [-SqlInstance \u003cDbaInstanceParameter[]\u003e] [-SqlCredential \u003cPSCredential\u003e] [-Database \u003cString\u003e] [-QueryTimeout \u003cInt32\u003e] -SqlObject \u003cSqlSmoObject[]\u003e [-As \u003cString\u003e] [-SqlParameters \u003cIDictionary\u003e] [-AppendServerInstance] [-MessagesToOutput] [-InputObject \u003cDatabase[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Invoke-DbatoolsFormatter",
        "Description":  "Uses PSSA\u0027s Invoke-Formatter to format the target files and saves it without the BOM.",
        "Tags":  "Formatting",
        "Params":  [
                       [
                           "Path",
                           "The path to the ps1 file that needs to be formatted",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Simone Bizzotto",
        "Synopsis":  "Helps formatting function files to dbatools\u0027 standards",
        "Name":  "Invoke-DbatoolsFormatter",
        "Links":  "https://dbatools.io/Invoke-DbatoolsFormatter",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eInvoke-DbatoolsFormatter -Path C:\\dbatools\\functions\\Get-DbaDatabase.ps1\nReformats C:\\dbatools\\functions\\Get-DbaDatabase.ps1 to dbatools\u0027 standards",
        "Syntax":  "Invoke-DbatoolsFormatter [-Path] \u003cObject[]\u003e [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Invoke-DbatoolsRenameHelper",
        "Description":  "Older dbatools command names have been changed. This script helps keep up.",
        "Tags":  "Module",
        "Params":  [
                       [
                           "InputObject",
                           "A piped in object from Get-ChildItem",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Encoding",
                           "Specifies the file encoding. The default is UTF8.\nValid values are:\r\n-- ASCII: Uses the encoding for the ASCII (7-bit) character set.\r\n-- BigEndianUnicode: Encodes in UTF-16 format using the big-endian byte order.\r\n-- Byte: Encodes a set of characters into a sequence of bytes.\r\n-- String: Uses the encoding type for a string.\r\n-- Unicode: Encodes in UTF-16 format using the little-endian byte order.\r\n-- UTF7: Encodes in UTF-7 format.\r\n-- UTF8: Encodes in UTF-8 format.\r\n-- Unknown: The encoding type is unknown or invalid. The data can be treated as binary.",
                           "",
                           false,
                           "false",
                           "UTF8"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Older dbatools command names have been changed. This script helps keep up.",
        "Name":  "Invoke-DbatoolsRenameHelper",
        "Links":  "https://dbatools.io/Invoke-DbatoolsRenameHelper",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-ChildItem C:\\temp\\ps\\*.ps1 -Recurse | Invoke-DbatoolsRenameHelper\nChecks to see if any ps1 file in C:\\temp\\ps matches an old command name.\r\nIf so, then the command name within the text is updated and the resulting changes are written to disk in UTF-8.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-ChildItem C:\\temp\\ps\\*.ps1 -Recurse | Invoke-DbatoolsRenameHelper -Encoding Ascii -WhatIf\nShows what would happen if the command would run. If the command would run and there were matches,\r\nthe resulting changes would be written to disk as Ascii encoded.",
        "Syntax":  "Invoke-DbatoolsRenameHelper [-InputObject] \u003cFileInfo[]\u003e [[-Encoding] \u003cString\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Invoke-DbaWhoIsActive",
        "Description":  "Output results of Adam Machanic\u0027s sp_WhoIsActive\n\nThis command was built with Adam\u0027s permission. To read more about sp_WhoIsActive, please visit:\n\nUpdates: http://sqlblog.com/blogs/adam_machanic/archive/tags/who+is+active/default.aspx\n\nAlso, consider donating to Adam if you find this stored procedure helpful: http://tinyurl.com/WhoIsActiveDonate",
        "Tags":  [
                     "AdamMechanic",
                     "WhoIsActive",
                     "SpWhoIsActive"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2000 or higher.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database where sp_WhoIsActive is installed. Defaults to master. If the sp_WhoIsActive is not installed, the command will warn and exit.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Filter",
                           "FiltersBoth inclusive and exclusive\r\nSet either filter to \u0027\u0027 to disable\r\nSession is a session ID, and either 0 or \u0027\u0027 can be used to indicate \"all\" sessions\r\nAll other filter types support % or _ as wildcards",
                           "As",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "FilterType",
                           "Valid filter types are: session, program, database, login, and host",
                           "",
                           false,
                           "false",
                           "Session"
                       ],
                       [
                           "NotFilter",
                           "FiltersBoth inclusive and exclusive\r\nSet either filter to \u0027\u0027 to disable\r\nSession is a session ID, and either 0 or \u0027\u0027 can be used to indicate \"all\" sessions\r\nAll other filter types support % or _ as wildcards",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "NotFilterType",
                           "Valid filter types are: session, program, database, login, and host",
                           "",
                           false,
                           "false",
                           "Session"
                       ],
                       [
                           "ShowOwnSpid",
                           "Retrieve data about the calling session?",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "ShowSystemSpids",
                           "Retrieve data about system sessions?",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "ShowSleepingSpids",
                           "Controls how sleeping SPIDs are handled, based on the idea of levels of interest\r\n0 does not pull any sleeping SPIDs\r\n1 pulls only those sleeping SPIDs that also have an open transaction\r\n2 pulls all sleeping SPIDs",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "GetFullInnerText",
                           "If 1, gets the full stored procedure or running batch, when available\r\nIf 0, gets only the actual statement that is currently running in the batch or procedure",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "GetPlans",
                           "Get associated query plans for running tasks, if available\r\nIf 1, gets the plan based on the request\u0027s statement offset\r\nIf 2, gets the entire plan based on the request\u0027s plan_handle",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "GetOuterCommand",
                           "Get the associated outer ad hoc query or stored procedure call, if available",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "GetTransactionInfo",
                           "Enables pulling transaction log write info and transaction duration",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "GetTaskInfo",
                           "Get information on active tasks, based on three interest levels\r\nLevel 0 does not pull any task-related information\r\nLevel 1 is a lightweight mode that pulls the top non-CXPACKET wait, giving preference to blockers\r\nLevel 2 pulls all available task-based metrics, including:\r\nnumber of active tasks, current wait stats, physical I/O, context switches, and blocker information",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "GetLocks",
                           "Gets associated locks for each request, aggregated in an XML format",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "GetAverageTime",
                           "Get average time for past runs of an active query\r\n(based on the combination of plan handle, sql handle, and offset)",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "GetAdditonalInfo",
                           "Get additional non-performance-related information about the session or request\r\ntext_size, language, date_format, date_first, quoted_identifier, arithabort, ansi_null_dflt_on,\r\nansi_defaults, ansi_warnings, ansi_padding, ansi_nulls, concat_null_yields_null,\r\ntransaction_isolation_level, lock_timeout, deadlock_priority, row_count, command_type\nIf a SQL Agent job is running, an subnode called agent_info will be populated with some or all of\r\nthe following: job_id, job_name, step_id, step_name, msdb_query_error (in the event of an error)\nIf @get_task_info is set to 2 and a lock wait is detected, a subnode called block_info will be\r\npopulated with some or all of the following: lock_type, database_name, object_id, file_id, hobt_id,\r\napplock_hash, metadata_resource, metadata_class_id, object_name, schema_name",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "FindBlockLeaders",
                           "Walk the blocking chain and count the number of\r\ntotal SPIDs blocked all the way down by a given session\r\nAlso enables task_info Level 1, if @get_task_info is set to 0",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "DeltaInterval",
                           "Pull deltas on various metrics\r\nInterval in seconds to wait before doing the second data pull",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "OutputColumnList",
                           "List of desired output columns, in desired order\r\nNote that the final output will be the intersection of all enabled features and all\r\ncolumns in the list. Therefore, only columns associated with enabled features will\r\nactually appear in the output. Likewise, removing columns from this list may effectively\r\ndisable features, even if they are turned on\nEach element in this list must be one of the valid output column names. Names must be\r\ndelimited by square brackets. White space, formatting, and additional characters are\r\nallowed, as long as the list contains exact matches of delimited valid column names.",
                           "",
                           false,
                           "false",
                           "[dd%][session_id][sql_text][sql_command][login_name][wait_info][tasks][tran_log%][cpu%][temp%][block%][reads%][writes%][context%][physical%][query_plan][locks][%]"
                       ],
                       [
                           "SortOrder",
                           "Column(s) by which to sort output, optionally with sort directions.\r\nValid column choices:\r\nsession_id, physical_io, reads, physical_reads, writes, tempdb_allocations,\r\ntempdb_current, CPU, context_switches, used_memory, physical_io_delta,\r\nreads_delta, physical_reads_delta, writes_delta, tempdb_allocations_delta,\r\ntempdb_current_delta, CPU_delta, context_switches_delta, used_memory_delta,\r\ntasks, tran_start_time, open_tran_count, blocking_session_id, blocked_session_count,\r\npercent_complete, host_name, login_name, database_name, start_time, login_time\nNote that column names in the list must be bracket-delimited. Commas and/or white\r\nspace are not required.",
                           "",
                           false,
                           "false",
                           "[start_time] ASC"
                       ],
                       [
                           "FormatOutput",
                           "Formats some of the output columns in a more \"human readable\" form\r\n0 disables output format\r\n1 formats the output for variable-width fonts\r\n2 formats the output for fixed-width fonts",
                           "",
                           false,
                           "false",
                           "1"
                       ],
                       [
                           "DestinationTable",
                           "If set to a non-blank value, the script will attempt to insert into the specified destination table. Please note that the script will not verify that the table exists, or that it has the correct \r\nschema, before doing the insert. Table can be specified in one, two, or three-part format",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ReturnSchema",
                           "If set to 1, no data collection will happen and no result set will be returned; instead,\r\na CREATE TABLE statement will be returned via the @schema parameter, which will match\r\nthe schema of the result set that would be returned by using the same collection of the\r\nrest of the parameters. The CREATE TABLE statement will have a placeholder token of\r\n\u003ctable_name\u003e in place of an actual table name.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Schema",
                           "If set to 1, no data collection will happen and no result set will be returned; instead,\r\na CREATE TABLE statement will be returned via the @schema parameter, which will match\r\nthe schema of the result set that would be returned by using the same collection of the\r\nrest of the parameters. The CREATE TABLE statement will have a placeholder token of\r\n\u003ctable_name\u003e in place of an actual table name.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Help",
                           "Help! What do I do?",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Show-SqlWhoIsActive",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Outputs results of Adam Machanic\u0027s sp_WhoIsActive DataTable",
        "Name":  "Invoke-DbaWhoIsActive",
        "Links":  "https://dbatools.io/Invoke-DbaWhoIsActive",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eInvoke-DbaWhoIsActive -SqlInstance sqlserver2014a\nExecute sp_whoisactive on sqlserver2014a. This command expects sp_WhoIsActive to be in the master database. Logs into the SQL Server with Windows credentials.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eInvoke-DbaWhoIsActive -SqlInstance sqlserver2014a -SqlCredential $credential -Database dbatools\nExecute sp_whoisactive on sqlserver2014a. This command expects sp_WhoIsActive to be in the dbatools database. Logs into the SQL Server with SQL Authentication.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eInvoke-DbaWhoIsActive -SqlInstance sqlserver2014a -GetAverageTime\nSimilar to running sp_WhoIsActive @get_avg_time\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eInvoke-DbaWhoIsActive -SqlInstance sqlserver2014a -GetOuterCommand -FindBlockLeaders\nSimilar to running sp_WhoIsActive @get_outer_command = 1, @find_block_leaders = 1",
        "Syntax":  "Invoke-DbaWhoIsActive [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject\u003e] [[-Filter] \u003cString\u003e] [[-FilterType] \u003cString\u003e] [[-NotFilter] \u003cString\u003e] [[-NotFilterType] \u003cString\u003e] [-ShowOwnSpid] [-ShowSystemSpids] [[-ShowSleepingSpids] \u003cInt32\u003e] [-GetFullInnerText] [[-GetPlans] \u003cInt32\u003e] [-GetOuterCommand] [-GetTransactionInfo] [[-GetTaskInfo] \u003cInt32\u003e] [-GetLocks] [-GetAverageTime] [-GetAdditonalInfo] [-FindBlockLeaders] [[-DeltaInterval] \u003cInt32\u003e] [[-OutputColumnList] \u003cString\u003e] [[-SortOrder] \u003cString\u003e] [[-FormatOutput] \u003cInt32\u003e] [[-DestinationTable] \u003cString\u003e] \r\n[-ReturnSchema] [[-Schema] \u003cString\u003e] [-Help] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Invoke-DbaXeReplay",
        "Description":  "This command replays events from Read-DbaXEFile. It is simplistic in its approach.\n\n- Writes all queries to a temp sql file\n- Executes temp file using . $sqlcmd so that batches are executed properly\n- Deletes temp file",
        "Tags":  [
                     "ExtendedEvent",
                     "XE",
                     "XEvent"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "Target SQL Server(s)",
                           "ServerInstance,SqlServer",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Used to provide alternative credentials.",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The initial starting database.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Event",
                           "Each Response can be limited to processing specific events, while ignoring all the other ones. When this attribute is omitted, all events are processed.",
                           "",
                           false,
                           "false",
                           "@(\u0027sql_batch_completed\u0027, \u0027rcp_completed\u0027)"
                       ],
                       [
                           "InputObject",
                           "Accepts the object output of Read-DbaXESession.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Raw",
                           "By dafault, the results of . $sqlcmd are collected, cleaned up and displayed. If you\u0027d like to see all results immeidately, use Raw.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "This command replays events from Read-DbaXEFile on one or more target servers",
        "Name":  "Invoke-DbaXeReplay",
        "Links":  "https://dbatools.io/Invoke-DbaXEReplay",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRead-DbaXEFile -Path C:\\temp\\sample.xel | Invoke-DbaXeReplay -SqlInstance sql2017\nRuns all batch_text for sql_batch_completed against tempdb on sql2017.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eRead-DbaXEFile -Path C:\\temp\\sample.xel | Invoke-DbaXeReplay -SqlInstance sql2017 -Database planning -Event sql_batch_completed\nSets the *initial* database to planning then runs only sql_batch_completed against sql2017.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eRead-DbaXEFile -Path C:\\temp\\sample.xel | Invoke-DbaXeReplay -SqlInstance sql2017, sql2016\nRuns all batch_text for sql_batch_completed against tempdb on sql2017 and sql2016.",
        "Syntax":  "Invoke-DbaXeReplay [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cString[]\u003e] [[-Event] \u003cString[]\u003e] [-InputObject] \u003cObject\u003e [-Raw] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Join-DbaAvailabilityGroup",
        "Description":  "Joins a secondary replica to an availability group on a SQL Server instance.",
        "Tags":  [
                     "AvailabilityGroup",
                     "HA",
                     "AG"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. Server version must be SQL Server version 2012 or higher.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the SqlInstance instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AvailabilityGroup",
                           "The availability group to join.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ClusterType",
                           "Cluster type of the Availability Group. Only supported in SQL Server 2017 and above.\r\nOptions include: External, Wsfc or None.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Enables piped input from Get-DbaAvailabilityGroup.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Joins a secondary replica to an availability group on a SQL Server instance.",
        "Name":  "Join-DbaAvailabilityGroup",
        "Links":  "https://dbatools.io/Join-DbaAvailabilityGroup",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaAvailabilityGroup -SqlInstance sql01 -AvailabilityGroup SharePoint | Join-DbaAvailabilityGroup -SqlInstance sql02\nJoins sql02 to the SharePoint availability group on sql01\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e$ag = Get-DbaAvailabilityGroup -SqlInstance sql01 -AvailabilityGroup SharePoint\nPS C:\\\u003e Join-DbaAvailabilityGroup -SqlInstance sql02 -InputObject $ag\nJoins sql02 to the SharePoint availability group on sql01\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaAvailabilityGroup -SqlInstance sql01 -AvailabilityGroup SharePoint | Join-DbaAvailabilityGroup -SqlInstance sql02 -WhatIf\nShows what would happen if the command were to run. No actions are actually performed.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaAvailabilityGroup -SqlInstance sql01 -AvailabilityGroup SharePoint | Join-DbaAvailabilityGroup -SqlInstance sql02 -Confirm\nPrompts for confirmation then joins sql02 to the SharePoint availability group on sql01.",
        "Syntax":  "Join-DbaAvailabilityGroup [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-AvailabilityGroup] \u003cString[]\u003e] [[-ClusterType] \u003cString\u003e] [[-InputObject] \u003cAvailabilityGroup[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Join-DbaPath",
        "Description":  "Performs multisegment path joins.",
        "Params":  [
                       [
                           "Path",
                           "The basepath to join on.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "Child",
                           "Any number of child paths to add.",
                           "",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Synopsis":  "Performs multisegment path joins.",
        "Name":  "Join-DbaPath",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eJoin-DbaPath -Path \u0027C:\\temp\u0027 \u0027Foo\u0027 \u0027Bar\u0027\nReturns \u0027C:\\temp\\Foo\\Bar\u0027 on windows.\r\nReturns \u0027C:/temp/Foo/Bar\u0027 on non-windows.",
        "Syntax":  "Join-DbaPath [-Path] \u003cString\u003e [-Child \u003cString[]\u003e] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Measure-DbaBackupThroughput",
        "Description":  "Returns backup history details for one or more databases on a SQL Server.\n\nOutput looks like this:\nSqlInstance     : sql2016\nDatabase        : SharePoint_Config\nAvgThroughput   : 1.07 MB\nAvgSize         : 24.17\nAvgDuration     : 00:00:01.1000000\nMinThroughput   : 0.02 MB\nMaxThroughput   : 2.26 MB\nMinBackupDate   : 8/6/2015 10:22:01 PM\nMaxBackupDate   : 6/19/2016 12:57:45 PM\nBackupCount     : 10",
        "Tags":  [
                     "Backup",
                     "Database"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,Instance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude. Options for this list are auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Since",
                           "All backups taken on or after the point in time represented by this datetime object will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Last",
                           "If this switch is enabled, only the last backup will be measured.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Type",
                           "By default, this command measures the speed of Full backups. Valid options are \"Full\", \"Log\" and \"Differential\".",
                           "",
                           false,
                           "false",
                           "Full"
                       ],
                       [
                           "DeviceType",
                           "Specifies one or more DeviceTypes to use in filtering backup sets. Valid values are \"Disk\", \"Permanent Disk Device\", \"Tape\", \"Permanent Tape Device\", \"Pipe\", \"Permanent Pipe Device\" and \"Virtual \r\nDevice\", as well as custom integers for your own DeviceTypes.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Determines how quickly SQL Server is backing up databases to media.",
        "Name":  "Measure-DbaBackupThroughput",
        "Links":  "https://dbatools.io/Measure-DbaBackupThroughput",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eMeasure-DbaBackupThroughput -SqlInstance sql2016\nParses every backup in msdb\u0027s backuphistory for stats on all databases.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eMeasure-DbaBackupThroughput -SqlInstance sql2016 -Database AdventureWorks2014\nParses every backup in msdb\u0027s backuphistory for stats on AdventureWorks2014.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eMeasure-DbaBackupThroughput -SqlInstance sql2005 -Last\nProcesses the last full, diff and log backups every backup for all databases on sql2005.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eMeasure-DbaBackupThroughput -SqlInstance sql2005 -Last -Type Log\nProcesses the last log backups every backup for all databases on sql2005.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eMeasure-DbaBackupThroughput -SqlInstance sql2016 -Since (Get-Date).AddDays(-7) | Where-Object { $_.MinThroughput.Gigabyte -gt 1 }\nGets backup calculations for the last week and filters results that have a minimum of 1GB throughput\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eMeasure-DbaBackupThroughput -SqlInstance sql2016 -Since (Get-Date).AddDays(-365) -Database bigoldb\nGets backup calculations, limited to the last year and only the bigoldb database",
        "Syntax":  "Measure-DbaBackupThroughput [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Database \u003cObject[]\u003e] [-ExcludeDatabase \u003cObject[]\u003e] [-Since \u003cDateTime\u003e] [-Last] [-Type \u003cString\u003e] [-DeviceType \u003cString[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Measure-DbaDiskSpaceRequirement",
        "Description":  "Returns a file list from source and destination where source file may overwrite destination. Complex scenarios where a new file may exist is taken into account.\nThis command will accept a hash object in pipeline with the following keys: Source, SourceDatabase, Destination. Using this command will provide a way to prepare before a complex migration with multiple databases from different sources and destinations.",
        "Tags":  [
                     "Database",
                     "DiskSpace",
                     "Migration"
                 ],
        "Params":  [
                       [
                           "Source",
                           "Source SQL Server.",
                           "",
                           true,
                           "true (ByPropertyName)",
                           ""
                       ],
                       [
                           "Database",
                           "The database to copy. It MUST exist.",
                           "",
                           true,
                           "true (ByPropertyName)",
                           ""
                       ],
                       [
                           "SourceSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "true (ByPropertyName)",
                           ""
                       ],
                       [
                           "Destination",
                           "Destination SQL Server instance.",
                           "",
                           true,
                           "true (ByPropertyName)",
                           ""
                       ],
                       [
                           "DestinationDatabase",
                           "The database name at destination.\r\nMay or may not be present, if unspecified it will default to the database name provided in SourceDatabase.",
                           "",
                           false,
                           "true (ByPropertyName)",
                           ""
                       ],
                       [
                           "DestinationSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "true (ByPropertyName)",
                           ""
                       ],
                       [
                           "Credential",
                           "The credentials to use to connect via CIM/WMI/PowerShell remoting.",
                           "",
                           false,
                           "true (ByPropertyName)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Pollus Brodeur (@pollusb)",
        "Synopsis":  "Calculate the space needed to copy and possibly replace a database from one SQL server to another.",
        "Name":  "Measure-DbaDiskSpaceRequirement",
        "Links":  "https://dbatools.io/Measure-DbaDiskSpaceRequirement",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eMeasure-DbaDiskSpaceRequirement -Source INSTANCE1 -Database DB1 -Destination INSTANCE2\nCalculate space needed for a simple migration with one database with the same name at destination.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e@(\n\u003e\u003e [PSCustomObject]@{Source=\u0027SQL1\u0027;Destination=\u0027SQL2\u0027;Database=\u0027DB1\u0027},\r\n\u003e\u003e [PSCustomObject]@{Source=\u0027SQL1\u0027;Destination=\u0027SQL2\u0027;Database=\u0027DB2\u0027}\r\n\u003e\u003e ) | Measure-DbaDiskSpaceRequirement\nUsing a PSCustomObject with 2 databases to migrate on SQL2.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eImport-Csv -Path .\\migration.csv -Delimiter \"`t\" | Measure-DbaDiskSpaceRequirement | Format-Table -AutoSize\nUsing a CSV file. You will need to use this header line \"Source\u003ctab\u003eDestination\u003ctab\u003eDatabase\u003ctab\u003eDestinationDatabase\".\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003e$qry = \"SELECT Source, Destination, Database FROM dbo.Migrations\"\nPS C:\\\u003e Invoke-DbaCmd -SqlInstance DBA -Database Migrations -Query $qry | Measure-DbaDiskSpaceRequirement\nUsing a SQL table. We are DBA after all!",
        "Syntax":  "Measure-DbaDiskSpaceRequirement [-Source] \u003cDbaInstanceParameter\u003e [-Database] \u003cString\u003e [[-SourceSqlCredential] \u003cPSCredential\u003e] [-Destination] \u003cDbaInstanceParameter\u003e [[-DestinationDatabase] \u003cString\u003e] [[-DestinationSqlCredential] \u003cPSCredential\u003e] [[-Credential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Measure-DbatoolsImport",
        "Description":  "Displays the import load times of the dbatools PowerShell module",
        "Tags":  "Debug",
        "Params":  [

                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Displays the import load times of the dbatools PowerShell module",
        "Name":  "Measure-DbatoolsImport",
        "Links":  "https://dbatools.io/Measure-DbatoolsImport",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eMeasure-DbatoolsImport\nDisplays the import load times of the dbatools PowerShell module\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eImport-Module dbatools\nPS C:\\\u003e Measure-DbatoolsImport\nDisplays the import load times of the dbatools PowerShell module",
        "Syntax":  "Measure-DbatoolsImport [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Mount-DbaDatabase",
        "Description":  "This command will attach a SQL Server database.",
        "Tags":  "Database",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to attach.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "FileStructure",
                           "A StringCollection object value that contains a list database files. If FileStructure is not specified, BackupHistory will be used to guess the structure.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "DatabaseOwner",
                           "Sets the database owner for the database. The sa account (or equivalent) will be used if DatabaseOwner is not specified.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AttachOption",
                           "An AttachOptions object value that contains the attachment options. Valid options are \"None\", \"RebuildLog\", \"EnableBroker\", \"NewBroker\" and \"ErrorBrokerConversations\".",
                           "",
                           false,
                           "false",
                           "None"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Attach-DbaDatabase",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Attach a SQL Server Database - aliased to Attach-DbaDatabase",
        "Name":  "Mount-DbaDatabase",
        "Links":  "https://dbatools.io/Mount-DbaDatabase",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003e$fileStructure = New-Object System.Collections.Specialized.StringCollection\nPS C:\\\u003e $fileStructure.Add(\"E:\\archive\\example.mdf\")\r\nPS C:\\\u003e $filestructure.Add(\"E:\\archive\\example.ldf\")\r\nPS C:\\\u003e $filestructure.Add(\"E:\\archive\\example.ndf\")\r\nPS C:\\\u003e Mount-DbaDatabase -SqlInstance sql2016 -Database example -FileStructure $fileStructure\nAttaches a database named \"example\" to sql2016 with the files \"E:\\archive\\example.mdf\", \"E:\\archive\\example.ldf\" and \"E:\\archive\\example.ndf\". The database owner will be set to sa and the attach \r\noption is None.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eMount-DbaDatabase -SqlInstance sql2016 -Database example\nSince the FileStructure was not provided, this command will attempt to determine it based on backup history. If found, a database named example will be attached to sql2016.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eMount-DbaDatabase -SqlInstance sql2016 -Database example -WhatIf\nShows what would happen if the command were executed (without actually performing the command)",
        "Syntax":  "Mount-DbaDatabase [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-Database] \u003cString[]\u003e [[-FileStructure] \u003cStringCollection\u003e] [[-DatabaseOwner] \u003cString\u003e] [[-AttachOption] \u003cString\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Move-DbaCmsRegServer",
        "Description":  "Moves registered servers around SQL Server Central Management Server (CMS)",
        "Tags":  [
                     "RegisteredServer",
                     "CMS"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Name",
                           "Specifies one or more reg servers to move. Name is the visible name in SSMS CMS interface (labeled Registered Server Name)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ServerName",
                           "Specifies one or more reg servers to move. Server Name is the actual instance name (labeled Server Name)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "NewGroup",
                           "The new group. If no new group is specified, the default root will used",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Allows results from Get-DbaCmsRegServer to be piped in",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Move-DbaRegisteredServer",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Moves registered servers around SQL Server Central Management Server (CMS)",
        "Name":  "Move-DbaCmsRegServer",
        "Links":  "https://dbatools.io/Move-DbaCmsRegServer",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eMove-DbaCmsRegServer -SqlInstance sql2012 -Name \u0027Web SQL Cluster\u0027 -NewGroup HR\\Prod\nMoves the registered server on sql2012 titled \u0027Web SQL Cluster\u0027 to the Prod group within the HR group\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaCmsRegServer -SqlInstance sql2017 -Name \u0027Web SQL Cluster\u0027 | Move-DbaCmsRegServer -NewGroup Web\nMoves the registered server \u0027Web SQL Cluster\u0027 on sql2017 to the Web group, also on sql2017",
        "Syntax":  "Move-DbaCmsRegServer [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Name] \u003cString[]\u003e] [[-ServerName] \u003cString[]\u003e] [[-NewGroup] \u003cString\u003e] [[-InputObject] \u003cRegisteredServer[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Move-DbaCmsRegServerGroup",
        "Description":  "Moves registered server groups around SQL Server Central Management Server (CMS).",
        "Tags":  [
                     "RegisteredServer",
                     "CMS"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Group",
                           "Specifies one or more groups to include from SQL Server Central Management Server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "NewGroup",
                           "The new location.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Allows results from Get-DbaCmsRegServerGroup to be piped in",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Move-DbaRegisteredServerGroup",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Moves registered server groups around SQL Server Central Management Server (CMS).",
        "Name":  "Move-DbaCmsRegServerGroup",
        "Links":  "https://dbatools.io/Move-DbaCmsRegServerGroup",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eMove-DbaCmsRegServerGroup -SqlInstance sql2012 -Group HR\\Development -NewGroup AD\\Prod\nMoves the Development group within HR to the Prod group within AD\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaCmsRegServerGroup -SqlInstance sql2017 -Group HR\\Development| Move-DbaCmsRegServer -NewGroup Web\nMoves the Development group within HR to the Web group",
        "Syntax":  "Move-DbaCmsRegServerGroup [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Group] \u003cString[]\u003e] [-NewGroup] \u003cString\u003e [[-InputObject] \u003cServerGroup[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "New-DbaAgentJob",
        "Description":  "New-DbaAgentJob makes is possible to create a job in the SQL Server Agent.\nIt returns an array of the job(s) created",
        "Tags":  [
                     "Agent",
                     "Job",
                     "JobStep"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2000 or greater.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Job",
                           "The name of the job. The name must be unique and cannot contain the percent (%) character.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "Schedule",
                           "Schedule to attach to job. This can be more than one schedule.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ScheduleId",
                           "Schedule ID to attach to job. This can be more than one schedule ID.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Disabled",
                           "Sets the status of the job to disabled. By default a job is enabled.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Description",
                           "The description of the job.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "StartStepId",
                           "The identification number of the first step to execute for the job.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "Category",
                           "The category of the job.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "OwnerLogin",
                           "The name of the login that owns the job.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EventLogLevel",
                           "Specifies when to place an entry in the Microsoft Windows application log for this job.\r\nAllowed values 0, \"Never\", 1, \"OnSuccess\", 2, \"OnFailure\", 3, \"Always\"\r\nThe text value can either be lowercase, uppercase or something in between as long as the text is correct.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EmailLevel",
                           "Specifies when to send an e-mail upon the completion of this job.\r\nAllowed values 0, \"Never\", 1, \"OnSuccess\", 2, \"OnFailure\", 3, \"Always\"\r\nThe text value can either be lowercase, uppercase or something in between as long as the text is correct.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "PageLevel",
                           "Specifies when to send a page upon the completion of this job.\r\nAllowed values 0, \"Never\", 1, \"OnSuccess\", 2, \"OnFailure\", 3, \"Always\"\r\nThe text value can either be lowercase, uppercase or something in between as long as the text is correct.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EmailOperator",
                           "The e-mail name of the operator to whom the e-mail is sent when EmailLevel is reached.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "NetsendOperator",
                           "The name of the operator to whom the network message is sent.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "PageOperator",
                           "The name of the operator to whom a page is sent.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "DeleteLevel",
                           "Specifies when to delete the job.\r\nAllowed values 0, \"Never\", 1, \"OnSuccess\", 2, \"OnFailure\", 3, \"Always\"\r\nThe text value can either be lowercase, uppercase or something in between as long as the text is correct.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Force",
                           "The force parameter will ignore some errors in the parameters and assume defaults.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Sander Stad (@sqlstad), sqlstad.nl",
        "Synopsis":  "New-DbaAgentJob creates a new job",
        "Name":  "New-DbaAgentJob",
        "Links":  "https://dbatools.io/New-DbaAgentJob",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eNew-DbaAgentJob -SqlInstance sql1 -Job \u0027Job One\u0027 -Description \u0027Just another job\u0027\nCreates a job with the name \"Job1\" and a small description\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eNew-DbaAgentJob -SqlInstance sql1 -Job \u0027Job One\u0027 -Disabled\nCreates the job but sets it to disabled\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eNew-DbaAgentJob -SqlInstance sql1 -Job \u0027Job One\u0027 -EventLogLevel OnSuccess\nCreates the job and sets the notification to write to the Windows Application event log on success\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eNew-DbaAgentJob -SqlInstance SSTAD-PC -Job \u0027Job One\u0027 -EmailLevel OnFailure -EmailOperator dba\nCreates the job and sets the notification to send an e-mail to the e-mail operator\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eNew-DbaAgentJob -SqlInstance sql1 -Job \u0027Job One\u0027 -Description \u0027Just another job\u0027 -Whatif\nDoesn\u0027t create the job but shows what would happen.\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eNew-DbaAgentJob -SqlInstance sql1, sql2, sql3 -Job \u0027Job One\u0027\nCreates a job with the name \"Job One\" on multiple servers\n-------------------------- EXAMPLE 7 --------------------------\nPS C:\\\u003e\"sql1\", \"sql2\", \"sql3\" | New-DbaAgentJob -Job \u0027Job One\u0027\nCreates a job with the name \"Job One\" on multiple servers using the pipe line",
        "Syntax":  "New-DbaAgentJob [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-Job] \u003cString\u003e [[-Schedule] \u003cObject[]\u003e] [[-ScheduleId] \u003cInt32[]\u003e] [-Disabled] [[-Description] \u003cString\u003e] [[-StartStepId] \u003cInt32\u003e] [[-Category] \u003cString\u003e] [[-OwnerLogin] \u003cString\u003e] [[-EventLogLevel] \u003cObject\u003e] [[-EmailLevel] \u003cObject\u003e] [[-PageLevel] \u003cObject\u003e] [[-EmailOperator] \u003cString\u003e] [[-NetsendOperator] \u003cString\u003e] [[-PageOperator] \u003cString\u003e] [[-DeleteLevel] \u003cObject\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "New-DbaAgentJobCategory",
        "Description":  "New-DbaAgentJobCategory makes it possible to create a job category that can be used with jobs.\nIt returns an array of the job(s) created .",
        "Tags":  [
                     "Agent",
                     "Job",
                     "JobCategory"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2000 or greater.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Category",
                           "The name of the category",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "CategoryType",
                           "The type of category. This can be \"LocalJob\", \"MultiServerJob\" or \"None\".\r\nThe default is \"LocalJob\" and will automatically be set when no option is chosen.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Force",
                           "The force parameter will ignore some errors in the parameters and assume defaults.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Sander Stad (@sqlstad), sqlstad.nl",
        "Synopsis":  "New-DbaAgentJobCategory creates a new job category.",
        "Name":  "New-DbaAgentJobCategory",
        "Links":  "https://dbatools.io/New-DbaAgentJobCategory",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eNew-DbaAgentJobCategory -SqlInstance sql1 -Category \u0027Category 1\u0027\nCreates a new job category with the name \u0027Category 1\u0027.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eNew-DbaAgentJobCategory -SqlInstance sql1 -Category \u0027Category 2\u0027 -CategoryType MultiServerJob\nCreates a new job category with the name \u0027Category 2\u0027 and assign the category type for a multi server job.",
        "Syntax":  "New-DbaAgentJobCategory [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-Category] \u003cString[]\u003e [[-CategoryType] \u003cString\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "New-DbaAgentJobStep",
        "Description":  "New-DbaAgentJobStep creates a new job in the SQL Server Agent for a specific job",
        "Tags":  [
                     "Agent",
                     "Job",
                     "JobStep"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2000 or greater.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Job",
                           "The name of the job to which to add the step.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "StepId",
                           "The sequence identification number for the job step. Step identification numbers start at 1 and increment without gaps.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "StepName",
                           "The name of the step.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "Subsystem",
                           "The subsystem used by the SQL Server Agent service to execute command.\r\nAllowed values \u0027ActiveScripting\u0027,\u0027AnalysisCommand\u0027,\u0027AnalysisQuery\u0027,\u0027CmdExec\u0027,\u0027Distribution\u0027,\u0027LogReader\u0027,\u0027Merge\u0027,\u0027PowerShell\u0027,\u0027QueueReader\u0027,\u0027Snapshot\u0027,\u0027Ssis\u0027,\u0027TransactSql\u0027\r\nThe default is \u0027TransactSql\u0027",
                           "",
                           false,
                           "false",
                           "TransactSql"
                       ],
                       [
                           "SubsystemServer",
                           "The subsystems AnalysisScripting, AnalysisCommand, AnalysisQuery ned the server property to be able to apply",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Command",
                           "The commands to be executed by SQLServerAgent service through subsystem.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "CmdExecSuccessCode",
                           "The value returned by a CmdExec subsystem command to indicate that command executed successfully.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "OnSuccessAction",
                           "The action to perform if the step succeeds.\r\nAllowed values  \"QuitWithSuccess\" (default), \"QuitWithFailure\", \"GoToNextStep\", \"GoToStep\".\r\nThe text value van either be lowercase, uppercase or something in between as long as the text is correct.",
                           "",
                           false,
                           "false",
                           "QuitWithSuccess"
                       ],
                       [
                           "OnSuccessStepId",
                           "The ID of the step in this job to execute if the step succeeds and OnSuccessAction is \"GoToStep\".",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "OnFailAction",
                           "The action to perform if the step fails.\r\nAllowed values  \"QuitWithSuccess\" (default), \"QuitWithFailure\", \"GoToNextStep\", \"GoToStep\".\r\nThe text value van either be lowercase, uppercase or something in between as long as the text is correct.",
                           "",
                           false,
                           "false",
                           "QuitWithFailure"
                       ],
                       [
                           "OnFailStepId",
                           "The ID of the step in this job to execute if the step fails and OnFailAction is \"GoToStep\".",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "Database",
                           "The name of the database in which to execute a Transact-SQL step. The default is \u0027master\u0027.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "DatabaseUser",
                           "The name of the user account to use when executing a Transact-SQL step.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "RetryAttempts",
                           "The number of retry attempts to use if this step fails. The default is 0.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "RetryInterval",
                           "The amount of time in minutes between retry attempts. The default is 0.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "OutputFileName",
                           "The name of the file in which the output of this step is saved.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Flag",
                           "Sets the flag(s) for the job step.\nFlag                                    Description\r\n----------------------------------------------------------------------------\r\nAppendAllCmdExecOutputToJobHistory      Job history, including command output, is appended to the job history file.\r\nAppendToJobHistory                      Job history is appended to the job history file.\r\nAppendToLogFile                         Job history is appended to the SQL Server log file.\r\nAppendToTableLog                        Job history is appended to a log table.\r\nLogToTableWithOverwrite                 Job history is written to a log table, overwriting previous contents.\r\nNone                                    Job history is not appended to a file.\r\nProvideStopProcessEvent                 Job processing is stopped.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ProxyName",
                           "The name of the proxy that the job step runs as.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Force",
                           "The force parameter will ignore some errors in the parameters and assume defaults.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Sander Stad (@sqlstad), sqlstad.nl",
        "Synopsis":  "New-DbaAgentJobStep creates a new job step for a job",
        "Name":  "New-DbaAgentJobStep",
        "Links":  "https://dbatools.io/New-DbaAgentJobStep",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eNew-DbaAgentJobStep -SqlInstance sql1 -Job Job1 -StepName Step1\nCreate a step in \"Job1\" with the name Step1 with the default subsystem TransactSql.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eNew-DbaAgentJobStep -SqlInstance sql1 -Job Job1 -StepName Step1 -Database msdb\nCreate a step in \"Job1\" with the name Step1 where the database will the msdb\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eNew-DbaAgentJobStep -SqlInstance sql1, sql2, sql3 -Job Job1 -StepName Step1 -Database msdb\nCreate a step in \"Job1\" with the name Step1 where the database will the \"msdb\" for multiple servers\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eNew-DbaAgentJobStep -SqlInstance sql1, sql2, sql3 -Job Job1, Job2, \u0027Job Three\u0027 -StepName Step1 -Database msdb\nCreate a step in \"Job1\" with the name Step1 where the database will the \"msdb\" for multiple servers for multiple jobs\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003esql1, sql2, sql3 | New-DbaAgentJobStep -Job Job1 -StepName Step1 -Database msdb\nCreate a step in \"Job1\" with the name Step1 where the database will the \"msdb\" for multiple servers using pipeline",
        "Syntax":  "New-DbaAgentJobStep [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-Job] \u003cObject[]\u003e [[-StepId] \u003cInt32\u003e] [-StepName] \u003cString\u003e [[-Subsystem] \u003cString\u003e] [[-SubsystemServer] \u003cString\u003e] [[-Command] \u003cString\u003e] [[-CmdExecSuccessCode] \u003cInt32\u003e] [[-OnSuccessAction] \u003cString\u003e] [[-OnSuccessStepId] \u003cInt32\u003e] [[-OnFailAction] \u003cString\u003e] [[-OnFailStepId] \u003cInt32\u003e] [[-Database] \u003cObject\u003e] [[-DatabaseUser] \u003cString\u003e] [[-RetryAttempts] \u003cInt32\u003e] [[-RetryInterval] \u003cInt32\u003e] [[-OutputFileName] \u003cString\u003e] [[-Flag] \u003cString[]\u003e] [[-ProxyName] \u003cString\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] \r\n[\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "New-DbaAgentProxy",
        "Description":  "Adds one or more proxies to SQL Server Agent",
        "Tags":  [
                     "Agent",
                     "Proxy"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.You must have sysadmin access and server version must be SQL Server version 2000 or higher.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Name",
                           "The name of the proxy or proxies you want to create",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "ProxyCredential",
                           "The associated SQL Server Credential. The credential must be created prior to creating the Proxy.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SubSystem",
                           "The associated subsystem or subsystems. Defaults to CmdExec.\nValid options include:\r\nActiveScripting\r\nAnalysisCommand\r\nAnalysisQuery\r\nCmdExec\r\nDistribution\r\nLogReader\r\nMerge\r\nPowerShell\r\nQueueReader\r\nSnapshot\r\nSsis\r\nTransactSql",
                           "",
                           false,
                           "false",
                           "CmdExec"
                       ],
                       [
                           "Description",
                           "A description of the proxy",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Login",
                           "The SQL Server login or logins (known as proxy principals) to assign to the proxy",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ServerRole",
                           "The SQL Server role or roles (known as proxy principals) to assign to the proxy",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "MsdbRole",
                           "The msdb role or roles (known as proxy principals) to assign to the proxy",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Disabled",
                           "Create the proxy as disabled",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Force",
                           "Drop and recreate the proxy if it already exists",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Adds one or more proxies to SQL Server Agent",
        "Name":  "New-DbaAgentProxy",
        "Links":  "https://dbatools.io/New-DbaAgentProxy",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eNew-DbaAgentProxy -SqlInstance sql2016 -Name STIG -ProxyCredential \u0027PowerShell Proxy\u0027\nCreates an Agent Proxy on sql2016 with the name STIG with the \u0027PowerShell Proxy\u0027 credential.\r\nThe proxy is automatically added to the CmdExec subsystem.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eNew-DbaAgentProxy -SqlInstance localhost\\sql2016 -Name STIG -ProxyCredential \u0027PowerShell Proxy\u0027 -Description \"Used for auditing purposes\" -Login ad\\sqlstig -SubSystem CmdExec, PowerShell \r\n-ServerRole securtyadmin -MsdbRole ServerGroupAdministratorRole\nCreates an Agent Proxy on sql2016 with the name STIG with the \u0027PowerShell Proxy\u0027 credential and the following principals:\nLogin: ad\\sqlstig\r\nServerRole: securtyadmin\r\nMsdbRole: ServerGroupAdministratorRole\nBy default, only sysadmins have access to create job steps with proxies. This will allow 3 additional principals access:\r\nThe proxy is then added to the CmdExec and PowerShell subsystems",
        "Syntax":  "New-DbaAgentProxy [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-Name] \u003cString[]\u003e [-ProxyCredential] \u003cString[]\u003e [[-SubSystem] \u003cString[]\u003e] [[-Description] \u003cString\u003e] [[-Login] \u003cString[]\u003e] [[-ServerRole] \u003cString[]\u003e] [[-MsdbRole] \u003cString[]\u003e] [-Disabled] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "New-DbaAgentSchedule",
        "Description":  "New-DbaAgentSchedule will help create a new schedule for a job.\nIf the job parameter is not supplied the schedule will not be attached to a job.",
        "Tags":  [
                     "Agent",
                     "Job",
                     "JobStep"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2000 or greater.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Job",
                           "The name of the job that has the schedule.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Schedule",
                           "The name of the schedule.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Disabled",
                           "Set the schedule to disabled. Default is enabled",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "FrequencyType",
                           "A value indicating when a job is to be executed.\nAllowed values: Once, Daily, Weekly, Monthly, MonthlyRelative, AgentStart or IdleComputer\nIf force is used the default will be \"Once\".",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "FrequencyInterval",
                           "The days that a job is executed\nAllowed values: Sunday, Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, Weekdays, Weekend or EveryDay.\r\nThe other allowed values are the numbers 1 to 31 for each day of the month.\nIf \"Weekdays\", \"Weekend\" or \"EveryDay\" is used it over writes any other value that has been passed before.\nIf force is used the default will be 1.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "FrequencySubdayType",
                           "Specifies the units for the subday FrequencyInterval.\nAllowed values: Time, Seconds, Minutes, or Hours",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "FrequencySubdayInterval",
                           "The number of subday type periods to occur between each execution of a job.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "FrequencyRelativeInterval",
                           "A job\u0027s occurrence of FrequencyInterval in each month, if FrequencyInterval is 32 (monthlyrelative).\nAllowed values: First, Second, Third, Fourth or Last",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "FrequencyRecurrenceFactor",
                           "The number of weeks or months between the scheduled execution of a job.\nFrequencyRecurrenceFactor is used only if FrequencyType is \"Weekly\", \"Monthly\" or \"MonthlyRelative\".",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "StartDate",
                           "The date on which execution of a job can begin.\nIf force is used the start date will be the current day",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EndDate",
                           "The date on which execution of a job can stop.\nIf force is used the end date will be \u00279999-12-31\u0027",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "StartTime",
                           "The time on any day to begin execution of a job. Format HHMMSS / 24 hour clock.\r\nExample: \u0027010000\u0027 for 01:00:00 AM.\r\nExample: \u0027140000\u0027 for 02:00:00 PM.\nIf force is used the start time will be \u002700:00:00\u0027",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EndTime",
                           "The time on any day to end execution of a job. Format HHMMSS / 24 hour clock.\r\nExample: \u0027010000\u0027 for 01:00:00 AM.\r\nExample: \u0027140000\u0027 for 02:00:00 PM.\nIf force is used the start time will be \u002723:59:59\u0027",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Force",
                           "The force parameter will ignore some errors in the parameters and assume defaults.\r\nIt will also remove the any present schedules with the same name for the specific job.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Sander Stad (@sqlstad), sqlstad.nl",
        "Synopsis":  "New-DbaAgentSchedule creates a new schedule in the msdb database.",
        "Name":  "New-DbaAgentSchedule",
        "Links":  "https://dbatools.io/New-DbaAgentSchedule",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eNew-DbaAgentSchedule -SqlInstance localhost\\SQL2016 -Schedule daily -FrequencyType Daily -FrequencyInterval Everyday -Force\nCreates a schedule with a daily frequency every day. It assumes default values for the start date, start time, end date and end time due to -Force.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eNew-DbaAgentSchedule -SqlInstance sstad-pc -Schedule MonthlyTest -FrequencyType Monthly -FrequencyInterval 10 -FrequencyRecurrenceFactor 1 -Force\nCreate a schedule with a monhtly frequency occuring every 10th of the month. It assumes default values for the start date, start time, end date and end time due to -Force.",
        "Syntax":  "New-DbaAgentSchedule [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Job] \u003cObject[]\u003e] [[-Schedule] \u003cObject\u003e] [-Disabled] [[-FrequencyType] \u003cObject\u003e] [[-FrequencyInterval] \u003cObject[]\u003e] [[-FrequencySubdayType] \u003cObject\u003e] [[-FrequencySubdayInterval] \u003cInt32\u003e] [[-FrequencyRelativeInterval] \u003cObject\u003e] [[-FrequencyRecurrenceFactor] \u003cInt32\u003e] [[-StartDate] \u003cString\u003e] [[-EndDate] \u003cString\u003e] [[-StartTime] \u003cString\u003e] [[-EndTime] \u003cString\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "New-DbaAvailabilityGroup",
        "Description":  "Automates the creation of availability groups.\n\n* Checks prerequisites\n* Creates Availability Group and adds primary replica\n* Grants cluster permissions if necessary\n* Adds secondary replica if supplied\n* Adds databases if supplied\n* Performs backup/restore if seeding mode is manual\n* Performs backup to NUL if seeding mode is automatic\n* Adds listener to primary if supplied\n* Joins secondaries to availability group\n* Grants endpoint connect permissions to service accounts\n* Grants CreateAnyDatabase permissions if seeding mode is automatic\n* Returns Availability Group object from primary\n\nNOTE: If a backup / restore is performed, the backups will be left intact on the network share.\n\nThanks for this, Thomas Stringer! https://blogs.technet.microsoft.com/heyscriptingguy/2013/04/29/set-up-an-alwayson-availability-group-with-powershell/",
        "Tags":  "HA",
        "Params":  [
                       [
                           "Primary",
                           "The primary SQL Server instance. Server version must be SQL Server version 2012 or higher.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "PrimarySqlCredential",
                           "Login to the primary instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Secondary",
                           "The target SQL Server instance or instances. Server version must be SQL Server version 2012 or higher.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SecondarySqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Name",
                           "The name of the Availability Group.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "DtcSupport",
                           "Indicates whether the DtcSupport is enabled",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "ClusterType",
                           "Cluster type of the Availability Group. Only supported in SQL Server 2017 and above.\r\nOptions include: External, Wsfc or None. None by default.",
                           "",
                           false,
                           "false",
                           "External"
                       ],
                       [
                           "AutomatedBackupPreference",
                           "Specifies how replicas in the primary role are treated in the evaluation to pick the desired replica to perform a backup.",
                           "",
                           false,
                           "false",
                           "Secondary"
                       ],
                       [
                           "FailureConditionLevel",
                           "Specifies the different conditions that can trigger an automatic failover in Availability Group.",
                           "",
                           false,
                           "false",
                           "OnServerDown"
                       ],
                       [
                           "HealthCheckTimeout",
                           "This setting used to specify the length of time, in milliseconds, that the SQL Server resource DLL should wait for information returned by the sp_server_diagnostics stored procedure before reporting \r\nthe Always On Failover Cluster Instance (FCI) as unresponsive.\nChanges that are made to the timeout settings are effective immediately and do not require a restart of the SQL Server resource.\nDefaults to 30000 (30 seconds).",
                           "",
                           false,
                           "false",
                           "30000"
                       ],
                       [
                           "Basic",
                           "Indicates whether the availability group is basic. Basic availability groups like pumpkin spice and uggs.\nhttps://docs.microsoft.com/en-us/sql/database-engine/availability-groups/windows/basic-availability-groups-always-on-availability-groups",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "DatabaseHealthTrigger",
                           "Indicates whether the availability group triggers the database health.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Passthru",
                           "Don\u0027t create the availability group, just pass thru an object that can be further customized before creation.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Database",
                           "The database or databases to add.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SharedPath",
                           "The network share where the backups will be backed up and restored from.\nEach SQL Server service account must have access to this share.\nNOTE: If a backup / restore is performed, the backups will be left in tact on the network share.",
                           "NetworkShare",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "UseLastBackup",
                           "Use the last full backup of database.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Force",
                           "Drop and recreate the database on remote servers using fresh backup.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "AvailabilityMode",
                           "Sets the availability mode of the availability group replica. Options are: AsynchronousCommit and SynchronousCommit. SynchronousCommit is default.",
                           "",
                           false,
                           "false",
                           "SynchronousCommit"
                       ],
                       [
                           "FailoverMode",
                           "Sets the failover mode of the availability group replica. Options are Automatic, Manual and External. Automatic is default.",
                           "",
                           false,
                           "false",
                           "Automatic"
                       ],
                       [
                           "BackupPriority",
                           "Sets the backup priority availability group replica. Default is 50.",
                           "",
                           false,
                           "false",
                           "50"
                       ],
                       [
                           "ConnectionModeInPrimaryRole",
                           "Specifies the connection intent modes of an Availability Replica in primary role. AllowAllConnections by default.",
                           "",
                           false,
                           "false",
                           "AllowAllConnections"
                       ],
                       [
                           "ConnectionModeInSecondaryRole",
                           "Specifies the connection modes of an Availability Replica in secondary role. AllowAllConnections by default.",
                           "",
                           false,
                           "false",
                           "AllowAllConnections"
                       ],
                       [
                           "SeedingMode",
                           "Specifies how the secondary replica will be initially seeded.\nAutomatic enables direct seeding. This method will seed the secondary replica over the network. This method does not require you to backup and restore a copy of the primary database on the replica.\nManual requires you to create a backup of the database on the primary replica and manually restore that backup on the secondary replica.",
                           "",
                           false,
                           "false",
                           "Manual"
                       ],
                       [
                           "Endpoint",
                           "By default, this command will attempt to find a DatabaseMirror endpoint. If one does not exist, it will create it.\nIf an endpoint must be created, the name \"hadr_endpoint\" will be used. If an alternative is preferred, use Endpoint.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ReadonlyRoutingConnectionUrl",
                           "Sets the read only routing connection url for the availability replica.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Certificate",
                           "Specifies that the endpoint is to authenticate the connection using the certificate specified by certificate_name to establish identity for authorization.\nThe far endpoint must have a certificate with the public key matching the private key of the specified certificate.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "IPAddress",
                           "Sets the IP address of the availability group listener.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SubnetMask",
                           "Sets the subnet IP mask of the availability group listener.",
                           "",
                           false,
                           "false",
                           "255.255.255.0"
                       ],
                       [
                           "Port",
                           "Sets the number of the port used to communicate with the availability group.",
                           "",
                           false,
                           "false",
                           "1433"
                       ],
                       [
                           "Dhcp",
                           "Indicates whether the object is DHCP.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Automates the creation of availability groups.",
        "Name":  "New-DbaAvailabilityGroup",
        "Links":  "https://dbatools.io/New-DbaAvailabilityGroup",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eNew-DbaAvailabilityGroup -Primary sql2016a -Name SharePoint\nCreates a new availability group on sql2016a named SharePoint\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eNew-DbaAvailabilityGroup -Primary sql2016a -Name SharePoint -Secondary sql2016b\nCreates a new availability group on sql2016b named SharePoint with a secondary replica, sql2016b\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eNew-DbaAvailabilityGroup -Primary sql2016std -Name BAG1 -Basic -Confirm:$false\nCreates a basic availability group named BAG1 on sql2016std and does not confirm when setting up\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eNew-DbaAvailabilityGroup -Primary sql2016b -Name AG1 -ClusterType Wsfc -Dhcp -Database db1 -UseLastBackup\nCreates an availability group on sql2016b with the name ag1. Uses the last backups available to add the database db1 to the AG.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eNew-DbaAvailabilityGroup -Primary sql2017 -Name SharePoint -ClusterType None -FailoverMode Manual\nCreates a new availability group on sql2017 named SharePoint with a cluster type of none and a failover mode of manual\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eNew-DbaAvailabilityGroup -Primary sql1 -Secondary sql2 -Name ag1 -Database pubs -ClusterType None -SeedingMode Automatic -FailoverMode Manual\nCreates a new availability group with a primary replica on sql1 and a secondary on sql2. Automatically adds the database pubs.\n-------------------------- EXAMPLE 7 --------------------------\nPS C:\\\u003e$cred = Get-Credential sqladmin\nPS C:\\\u003e $params = @{\r\n\u003e\u003e Primary = \"sql1\"\r\n\u003e\u003e PrimarySqlCredential = $cred\r\n\u003e\u003e Secondary = \"sql2\"\r\n\u003e\u003e SecondarySqlCredential = $cred\r\n\u003e\u003e Name = \"test-ag\"\r\n\u003e\u003e Database = \"pubs\"\r\n\u003e\u003e ClusterType = \"None\"\r\n\u003e\u003e SeedingMode = \"Automatic\"\r\n\u003e\u003e FailoverMode = \"Manual\"\r\n\u003e\u003e Confirm = $false\r\n\u003e\u003e }\r\nPS C:\\\u003e New-DbaAvailabilityGroup @params\nThis exact command was used to create an availability group on docker!",
        "Syntax":  "New-DbaAvailabilityGroup [[-Primary] \u003cDbaInstanceParameter\u003e] [[-PrimarySqlCredential] \u003cPSCredential\u003e] [[-Secondary] \u003cDbaInstanceParameter[]\u003e] [[-SecondarySqlCredential] \u003cPSCredential\u003e] [-Name] \u003cString\u003e [-DtcSupport] [[-ClusterType] \u003cString\u003e] [[-AutomatedBackupPreference] \u003cString\u003e] [[-FailureConditionLevel] \u003cString\u003e] [[-HealthCheckTimeout] \u003cInt32\u003e] [-Basic] [-DatabaseHealthTrigger] [-Passthru] [[-Database] \u003cString[]\u003e] [[-SharedPath] \u003cString\u003e] [-UseLastBackup] [-Force] [[-AvailabilityMode] \u003cString\u003e] [[-FailoverMode] \u003cString\u003e] [[-BackupPriority] \u003cInt32\u003e] [[-ConnectionModeInPrimaryRole] \u003cString\u003e] \r\n[[-ConnectionModeInSecondaryRole] \u003cString\u003e] [[-SeedingMode] \u003cString\u003e] [[-Endpoint] \u003cString\u003e] [[-ReadonlyRoutingConnectionUrl] \u003cString\u003e] [[-Certificate] \u003cString\u003e] [[-IPAddress] \u003cIPAddress[]\u003e] [[-SubnetMask] \u003cIPAddress\u003e] [[-Port] \u003cInt32\u003e] [-Dhcp] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "New-DbaClientAlias",
        "Description":  "Creates/updates a SQL Server alias by altering HKLM:\\SOFTWARE\\Microsoft\\MSSQLServer\\Client",
        "Tags":  "Alias",
        "Params":  [
                       [
                           "ComputerName",
                           "The target computer where the alias will be created",
                           "",
                           false,
                           "false",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Allows you to login to remote computers using alternative credentials",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ServerName",
                           "The target SQL Server",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Alias",
                           "The alias to be created",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "Protocol",
                           "The protocol for the connection, either TCPIP or NetBIOS. Defaults to TCPIP.",
                           "",
                           false,
                           "false",
                           "TCPIP"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Creates/updates a sql alias for the specified server - mimics cliconfg.exe",
        "Name":  "New-DbaClientAlias",
        "Links":  "https://dbatools.io/New-DbaClientAlias",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eNew-DbaClientAlias -ServerName sqlcluster\\sharepoint -Alias sp\nCreates a new TCP alias on the local workstation called sp, which points sqlcluster\\sharepoint\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eNew-DbaClientAlias -ServerName \u0027sqlcluster,14443\u0027 -Alias spinstance\nCreates a new TCP alias on the local workstation called spinstance, which points to sqlcluster, port 14443.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eNew-DbaClientAlias -ServerName sqlcluster\\sharepoint -Alias sp -Protocol NamedPipes\nCreates a new NamedPipes alias on the local workstation called sp, which points sqlcluster\\sharepoint",
        "Syntax":  "New-DbaClientAlias [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [-ServerName] \u003cDbaInstanceParameter[]\u003e [-Alias] \u003cString\u003e [[-Protocol] \u003cString\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "New-DbaCmConnection",
        "Description":  "Generates a connection object for use in remote computer management.\nThose objects are used for the purpose of cim/wmi queries, caching which protocol worked, optimizing performance and minimizing authentication errors.\n\nNew-DbaCmConnection will create a NEW object and overwrite any existing ones for the specified computer.\nFurthermore, information stored in the input beyond the computername will be discarded in favor of the new settings.\n\nUnless the connection cache has been disabled, all connections will automatically be registered in the cache, so no further action is necessary.\nThe output is primarily for information purposes, however it may be used to pass objects and circumvent the cache with those.\n\nNOTE: Generally, this function need not be used, as a first connection to a computer using any connecting function such as \"Get-DbaCmObject\" will automatically register a new default connection for it.\n\nThis function exists to be able to preconfigure connections.",
        "Tags":  [
                     "ComputerManagement",
                     "CIM"
                 ],
        "Params":  [
                       [
                           "ComputerName",
                           "The computer to build the connection object for.",
                           "",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "The credential to register.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "UseWindowsCredentials",
                           "Whether using the default windows credentials is legit.\r\nNot setting this will not exclude using windows credentials, but only not pre-confirm them as working.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "OverrideExplicitCredential",
                           "Setting this will enable the credential override.\r\nThe override will cause the system to ignore explicitly specified credentials, so long as known, good credentials are available.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "DisabledConnectionTypes",
                           "Exlicitly disable connection types.\r\nThese types will then not be used for connecting to the computer.",
                           "",
                           false,
                           "false",
                           "None"
                       ],
                       [
                           "DisableBadCredentialCache",
                           "Will prevent the caching of credentials if set to true.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "DisableCimPersistence",
                           "Will prevent Cim-Sessions to be reused.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "DisableCredentialAutoRegister",
                           "Will prevent working credentials from being automatically cached",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableCredentialFailover",
                           "Will enable automatic failing over to known to work credentials, when using bad credentials.\r\nBy default, passing bad credentials will cause the Computer Management functions to interrupt with a warning (Or exception if in silent mode).",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WindowsCredentialsAreBad",
                           "Will prevent the windows credentials of the currently logged on user from being used for the remote connection.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "CimWinRMOptions",
                           "Specify a set of options to use when connecting to the target computer using CIM over WinRM.\r\nUse \u0027New-CimSessionOption\u0027 to create such an object.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "CimDCOMOptions",
                           "Specify a set of options to use when connecting to the target computer using CIM over DCOM.\r\nUse \u0027New-CimSessionOption\u0027 to create such an object.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Synopsis":  "Generates a connection object for use in remote computer management.",
        "Name":  "New-DbaCmConnection",
        "Links":  "https://dbatools.io/New-DbaCmConnection",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eNew-DbaCmConnection -ComputerName sql2014 -UseWindowsCredentials -OverrideExplicitCredential -DisabledConnectionTypes CimRM\nReturns a new configuration object for connecting to the computer sql2014.\r\n- The current user credentials are set as valid\r\n- The connection is configured to ignore explicit credentials (so all connections use the windows credentials)\r\n- The connections will not try using CIM over WinRM\nUnless caching is globally disabled, this is automatically stored in the connection cache and will be applied automatically.\r\nIn that (the default) case, the output is for information purposes only and need not be used.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-Content computers.txt | New-DbaCmConnection -Credential $cred -CimWinRMOptions $options -DisableBadCredentialCache -OverrideExplicitCredential\nGathers a list of computers from a text file, then creates and registers connections for each of them, setting them to ...\r\n- use the credentials stored in $cred\r\n- use the options stored in $options when connecting using CIM over WinRM\r\n- not store credentials that are known to not work\r\n- to ignore explicitly specified credentials\nEssentially, this configures all connections to those computers to prefer failure with the specified credentials over using alternative credentials.",
        "Syntax":  "New-DbaCmConnection [-ComputerName \u003cDbaCmConnectionParameter[]\u003e] [-Credential \u003cPSCredential\u003e] [-OverrideExplicitCredential] [-DisabledConnectionTypes {None | CimRM | CimDCOM | Wmi | PowerShellRemoting}] [-DisableBadCredentialCache] [-DisableCimPersistence] [-DisableCredentialAutoRegister] [-EnableCredentialFailover] [-WindowsCredentialsAreBad] [-CimWinRMOptions \u003cWSManSessionOptions\u003e] [-CimDCOMOptions \u003cDComSessionOptions\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nNew-DbaCmConnection [-ComputerName \u003cDbaCmConnectionParameter[]\u003e] [-UseWindowsCredentials] [-OverrideExplicitCredential] [-DisabledConnectionTypes {None | CimRM | CimDCOM | Wmi | PowerShellRemoting}] [-DisableBadCredentialCache] [-DisableCimPersistence] [-DisableCredentialAutoRegister] [-EnableCredentialFailover] [-CimWinRMOptions \u003cWSManSessionOptions\u003e] [-CimDCOMOptions \u003cDComSessionOptions\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "New-DbaComputerCertificate",
        "Description":  "Creates a new computer certificate - self-signed or signed by an Active Directory CA, using the Web Server certificate.\n\nBy default, a key with a length of 1024 and a friendly name of the machines FQDN is generated.\n\nThis command was originally intended to help automate the process so that SSL certificates can be available for enforcing encryption on connections.\n\nIt makes a lot of assumptions - namely, that your account is allowed to auto-enroll and that you have permission to do everything it needs to do ;)\n\nReferences:\nhttp://sqlmag.com/sql-server/7-steps-ssl-encryption\nhttps://azurebi.jppp.org/2016/01/23/using-lets-encrypt-certificates-for-secure-sql-server-connections/\nhttps://blogs.msdn.microsoft.com/sqlserverfaq/2016/09/26/creating-and-registering-ssl-certificates/\n\nThe certificate is generated using AD\u0027s webserver SSL template on the client machine and pushed to the remote machine.",
        "Tags":  "Certificate",
        "Params":  [
                       [
                           "ComputerName",
                           "The target SQL Server instance or instances. Defaults to localhost. If target is a cluster, you must also specify ClusterInstanceName (see below)",
                           "ServerInstance,SqlServer,SqlInstance",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Allows you to login to $ComputerName using alternative credentials.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "CaServer",
                           "Optional - the CA Server where the request will be sent to",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "CaName",
                           "The properly formatted CA name of the corresponding CaServer",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ClusterInstanceName",
                           "When creating certs for a cluster, use this parameter to create the certificate for the cluster node name. Use ComputerName for each of the nodes.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SecurePassword",
                           "Password to encrypt/decrypt private key for export to remote machine",
                           "Password",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "FriendlyName",
                           "The FriendlyName listed in the certificate. This defaults to the FQDN of the $ComputerName",
                           "",
                           false,
                           "false",
                           "SQL Server"
                       ],
                       [
                           "CertificateTemplate",
                           "The domain\u0027s Certificate Template - WebServer by default.",
                           "",
                           false,
                           "false",
                           "WebServer"
                       ],
                       [
                           "KeyLength",
                           "The length of the key - defaults to 1024",
                           "",
                           false,
                           "false",
                           "1024"
                       ],
                       [
                           "Store",
                           "Certificate store - defaults to LocalMachine",
                           "",
                           false,
                           "false",
                           "LocalMachine"
                       ],
                       [
                           "Folder",
                           "Certificate folder - defaults to My (Personal)",
                           "",
                           false,
                           "false",
                           "My"
                       ],
                       [
                           "Dns",
                           "Specify the Dns entries listed in SAN. By default, it will be ComputerName + FQDN, or in the case of clusters, clustername + cluster FQDN.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SelfSigned",
                           "Creates a self-signed certificate. All other parameters can still apply except CaServer and CaName because the command does not go and get the certificate signed.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Creates a new computer certificate useful for Forcing Encryption",
        "Name":  "New-DbaComputerCertificate",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eNew-DbaComputerCertificate\nCreates a computer certificate signed by the local domain CA for the local machine with the keylength of 1024.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eNew-DbaComputerCertificate -ComputerName Server1\nCreates a computer certificate signed by the local domain CA _on the local machine_ for server1 with the keylength of 1024.\nThe certificate is then copied to the new machine over WinRM and imported.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eNew-DbaComputerCertificate -ComputerName sqla, sqlb -ClusterInstanceName sqlcluster -KeyLength 4096\nCreates a computer certificate for sqlcluster, signed by the local domain CA, with the keylength of 4096.\nThe certificate is then copied to sqla _and_ sqlb over WinRM and imported.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eNew-DbaComputerCertificate -ComputerName Server1 -WhatIf\nShows what would happen if the command were run\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eNew-DbaComputerCertificate -SelfSigned\nCreates a self-signed certificate",
        "Syntax":  "New-DbaComputerCertificate [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [[-CaServer] \u003cString\u003e] [[-CaName] \u003cString\u003e] [[-ClusterInstanceName] \u003cString\u003e] [[-SecurePassword] \u003cSecureString\u003e] [[-FriendlyName] \u003cString\u003e] [[-CertificateTemplate] \u003cString\u003e] [[-KeyLength] \u003cInt32\u003e] [[-Store] \u003cString\u003e] [[-Folder] \u003cString\u003e] [[-Dns] \u003cString[]\u003e] [-SelfSigned] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "New-DbaConnectionString",
        "Description":  "Builds or extracts a SQL Server Connection String\n\nSee https://msdn.microsoft.com/en-us/library/system.data.sqlclient.sqlconnection.connectionstring.aspx\nand https://msdn.microsoft.com/en-us/library/system.data.sqlclient.sqlconnectionstringbuilder.aspx\nand https://msdn.microsoft.com/en-us/library/system.data.sqlclient.sqlconnection.aspx",
        "Tags":  [
                     "Connection",
                     "Connect",
                     "ConnectionString"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Credential",
                           "Credential object used to connect to the SQL Server as a different user be it Windows or SQL Server. Windows users are determined by the existence of a backslash, so if you are intending to use an \r\nalternative Windows connection instead of a SQL login, ensure it contains a backslash.",
                           "SqlCredential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AccessToken",
                           "Gets or sets the access token for the connection.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ApplicationIntent",
                           "Declares the application workload type when connecting to a server. Possible values are ReadOnly and ReadWrite.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "BatchSeparator",
                           "By default, this is \"GO\"",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ClientName",
                           "By default, this command sets the client to \"dbatools PowerShell module - dbatools.io - custom connection\" if you\u0027re doing anything that requires profiling, you can look for this client name. Using \r\n-ClientName allows you to set your own custom client.",
                           "",
                           false,
                           "false",
                           "custom connection"
                       ],
                       [
                           "ConnectTimeout",
                           "The length of time (in seconds) to wait for a connection to the server before terminating the attempt and generating an error.\nValid values are greater than or equal to 0 and less than or equal to 2147483647.\nWhen opening a connection to a Azure SQL Database, set the connection timeout to 30 seconds.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "EncryptConnection",
                           "When true, SQL Server uses SSL encryption for all data sent between the client and server if the server has a certificate installed. Recognized values are true, false, yes, and no. For more \r\ninformation, see Connection String Syntax.\nBeginning in .NET Framework 4.5, when TrustServerCertificate is false and Encrypt is true, the server name (or IP address) in a SQL Server SSL certificate must exactly match the server name (or IP \r\naddress) specified in the connection string. Otherwise, the connection attempt will fail. For information about support for certificates whose subject starts with a wildcard character (*), see \r\nAccepted wildcards used by server certificates for server authentication.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "FailoverPartner",
                           "The name of the failover partner server where database mirroring is configured.\nIf the value of this key is \"\", then Initial Catalog must be present, and its value must not be \"\".\nThe server name can be 128 characters or less.\nIf you specify a failover partner but the failover partner server is not configured for database mirroring and the primary server (specified with the Server keyword) is not available, then the \r\nconnection will fail.\nIf you specify a failover partner and the primary server is not configured for database mirroring, the connection to the primary server (specified with the Server keyword) will succeed if the primary \r\nserver is available.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "IsActiveDirectoryUniversalAuth",
                           "Azure related",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "LockTimeout",
                           "Sets the time in seconds required for the connection to time out when the current transaction is locked.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "MaxPoolSize",
                           "Sets the maximum number of connections allowed in the connection pool for this specific connection string.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "MinPoolSize",
                           "Sets the minimum number of connections allowed in the connection pool for this specific connection string.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "MultipleActiveResultSets",
                           "When used, an application can maintain multiple active result sets (MARS). When false, an application must process or cancel all result sets from one batch before it can execute any other batch on \r\nthat connection.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "MultiSubnetFailover",
                           "If your application is connecting to an AlwaysOn availability group (AG) on different subnets, setting MultiSubnetFailover provides faster detection of and connection to the (currently) active \r\nserver. For more information about SqlClient support for Always On Availability Groups",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "NetworkProtocol",
                           "Connect explicitly using \u0027TcpIp\u0027,\u0027NamedPipes\u0027,\u0027Multiprotocol\u0027,\u0027AppleTalk\u0027,\u0027BanyanVines\u0027,\u0027Via\u0027,\u0027SharedMemory\u0027 and \u0027NWLinkIpxSpx\u0027",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "NonPooledConnection",
                           "Request a non-pooled connection",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "PacketSize",
                           "Sets the size in bytes of the network packets used to communicate with an instance of SQL Server. Must match at server.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "PooledConnectionLifetime",
                           "When a connection is returned to the pool, its creation time is compared with the current time, and the connection is destroyed if that time span (in seconds) exceeds the value specified by \r\nConnection Lifetime. This is useful in clustered configurations to force load balancing between a running server and a server just brought online.\nA value of zero (0) causes pooled connections to have the maximum connection timeout.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "SqlExecutionModes",
                           "The SqlExecutionModes enumeration contains values that are used to specify whether the commands sent to the referenced connection to the server are executed immediately or saved in a buffer.\nValid values include CaptureSql, ExecuteAndCaptureSql and ExecuteSql.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "StatementTimeout",
                           "Sets the number of seconds a statement is given to run before failing with a time-out error.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "TrustServerCertificate",
                           "Sets a value that indicates whether the channel will be encrypted while bypassing walking the certificate chain to validate trust.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WorkstationId",
                           "Sets the name of the workstation connecting to SQL Server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AppendConnectionString",
                           "Appends to the current connection string. Note that you cannot pass authentication information using this method. Use -SqlInstance and, optionally, -SqlCredential to set authentication information.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "New-DbaSqlConnectionString",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Builds or extracts a SQL Server Connection String",
        "Name":  "New-DbaConnectionString",
        "Links":  "https://dbatools.io/New-DbaConnectionString",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eNew-DbaConnectionString -SqlInstance sql2014\nCreates a connection string that connects using Windows Authentication\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eConnect-DbaInstance -SqlInstance sql2016 | New-DbaConnectionString\nBuilds a connected SMO object using Connect-DbaInstance then extracts and displays the connection string\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003e$wincred = Get-Credential ad\\sqladmin\nPS C:\\\u003e New-DbaConnectionString -SqlInstance sql2014 -Credential $wincred\nCreates a connection string that connects using alternative Windows credentials\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003e$sqlcred = Get-Credential sqladmin\nPS C:\\\u003e $server = New-DbaConnectionString -SqlInstance sql2014 -Credential $sqlcred\nLogin to sql2014 as SQL login sqladmin.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003e$server = New-DbaConnectionString -SqlInstance sql2014 -ClientName \"mah connection\"\nCreates a connection string that connects using Windows Authentication and uses the client name \"mah connection\". So when you open up profiler or use extended events, you can search for \"mah \r\nconnection\".\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003e$server = New-DbaConnectionString -SqlInstance sql2014 -AppendConnectionString \"Packet Size=4096;AttachDbFilename=C:\\MyFolder\\MyDataFile.mdf;User Instance=true;\"\nCreates a connection string that connects to sql2014 using Windows Authentication, then it sets the packet size (this can also be done via -PacketSize) and other connection attributes.\n-------------------------- EXAMPLE 7 --------------------------\nPS C:\\\u003e$server = New-DbaConnectionString -SqlInstance sql2014 -NetworkProtocol TcpIp -MultiSubnetFailover\nCreates a connection string with Windows Authentication that uses TCPIP and has MultiSubnetFailover enabled.\n-------------------------- EXAMPLE 8 --------------------------\nPS C:\\\u003e$connstring = New-DbaConnectionString sql2016 -ApplicationIntent ReadOnly\nCreates a connection string with ReadOnly ApplicationIntent.",
        "Syntax":  "New-DbaConnectionString [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-Credential] \u003cPSCredential\u003e] [[-AccessToken] \u003cString\u003e] [[-ApplicationIntent] \u003cString\u003e] [[-BatchSeparator] \u003cString\u003e] [[-ClientName] \u003cString\u003e] [[-ConnectTimeout] \u003cInt32\u003e] [-EncryptConnection] [[-FailoverPartner] \u003cString\u003e] [-IsActiveDirectoryUniversalAuth] [[-LockTimeout] \u003cInt32\u003e] [[-MaxPoolSize] \u003cInt32\u003e] [[-MinPoolSize] \u003cInt32\u003e] [-MultipleActiveResultSets] [-MultiSubnetFailover] [[-NetworkProtocol] \u003cString\u003e] [-NonPooledConnection] [[-PacketSize] \u003cInt32\u003e] [[-PooledConnectionLifetime] \u003cInt32\u003e] [[-SqlExecutionModes] \u003cString\u003e] \r\n[[-StatementTimeout] \u003cInt32\u003e] [-TrustServerCertificate] [[-WorkstationId] \u003cString\u003e] [[-AppendConnectionString] \u003cString\u003e] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "New-DbaConnectionStringBuilder",
        "Description":  "Creates a System.Data.SqlClient.SqlConnectionStringBuilder from a connection string.",
        "Tags":  [
                     "SqlBuild",
                     "ConnectionString",
                     "Connection"
                 ],
        "Params":  [
                       [
                           "ConnectionString",
                           "A Connection String",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "ApplicationName",
                           "The application name to tell SQL Server the connection is associated with.",
                           "",
                           false,
                           "false",
                           "dbatools Powershell Module"
                       ],
                       [
                           "DataSource",
                           "The Sql Server to connect to.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InitialCatalog",
                           "The initial database on the server to connect to.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "IntegratedSecurity",
                           "Set to true to use windows authentication.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "UserName",
                           "Sql User Name to connect with.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Password",
                           "Password to use to connect with.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "MultipleActiveResultSets",
                           "Enable Multiple Active Result Sets.",
                           "MARS",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "ColumnEncryptionSetting",
                           "Enable Always Encrypted.",
                           "AlwaysEncrypted",
                           false,
                           "false",
                           "Enabled"
                       ],
                       [
                           "WorkstationId",
                           "Set the Workstation Id that is associated with the connection.",
                           "",
                           false,
                           "false",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "New-DbaSqlConnectionStringBuilder",
        "Author":  "zippy1981 | Chrissy LeMaire (@cl)",
        "Synopsis":  "Returns a System.Data.SqlClient.SqlConnectionStringBuilder with the string specified",
        "Name":  "New-DbaConnectionStringBuilder",
        "Links":  "https://dbatools.io/New-DbaConnectionStringBuilder",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eNew-DbaConnectionStringBuilder\nReturns an empty ConnectionStringBuilder\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e\"Data Source=localhost,1433;Initial Catalog=AlwaysEncryptedSample;UID=sa;PWD=alwaysB3Encrypt1ng;Application Name=Always Encrypted Sample MVC App;Column Encryption Setting=enabled\" | \r\nNew-DbaConnectionStringBuilder\nReturns a connection string builder that can be used to connect to the local sql server instance on the default port.",
        "Syntax":  "New-DbaConnectionStringBuilder [[-ConnectionString] \u003cString[]\u003e] [[-ApplicationName] \u003cString\u003e] [[-DataSource] \u003cString\u003e] [[-InitialCatalog] \u003cString\u003e] [[-IntegratedSecurity] \u003cNullable`1\u003e] [[-UserName] \u003cString\u003e] [[-Password] \u003cString\u003e] [-MultipleActiveResultSets] [[-ColumnEncryptionSetting] {Disabled | Enabled}] [[-WorkstationId] \u003cString\u003e] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "New-DbaCredential",
        "Description":  "Creates a new credential",
        "Tags":  "Certificate",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server(s)",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to login to SQL Server using alternative credentials",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Name",
                           "The Credential name",
                           "",
                           false,
                           "false",
                           "$Identity"
                       ],
                       [
                           "Identity",
                           "The Credential Identity",
                           "CredentialIdentity",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SecurePassword",
                           "Secure string used to authenticate the Credential Identity",
                           "Password",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "MappedClassType",
                           "Sets the class associated with the credential.",
                           "",
                           false,
                           "false",
                           "None"
                       ],
                       [
                           "ProviderName",
                           "Sets the name of the provider",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Force",
                           "If credential exists, drop and recreate",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Creates a new SQL Server credential",
        "Name":  "New-DbaCredential",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eNew-DbaCredential -SqlInstance Server1\nYou will be prompted to securely enter your password, then a credential will be created in the master database on server1 if it does not exist.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eNew-DbaCredential -SqlInstance Server1 -Confirm:$false\nSuppresses all prompts to install but prompts to securely enter your password and creates a credential on Server1.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eNew-DbaCredential -SqlInstance Server1 -Name AzureBackupBlobStore -Identity \u0027\u003cAzure Storage Account Name\u003e\u0027 -SecurePassword (ConvertTo-SecureString \u0027\u003cAzure Storage Account Access Key\u003e\u0027 \r\n-AsPlainText -Force)\nCreate credential on SQL Server 2012 CU2, SQL Server 2014 for use with BACKUP TO URL.\r\nCredentialIdentity needs to be supplied with the Azure Storage Account Name.\r\nPassword needs to be one of the Access Keys for the account.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eNew-DbaCredential -SqlInstance Server1 -Name \u0027https://\u003cAzure Storage Account Name\u003e.blob.core.windows.net/\u003cBlob Store Container Name\u003e\u0027 -Identity \u0027SHARED ACCESS SIGNATURE\u0027 -SecurePassword \r\n(ConvertTo-SecureString \u0027\u003cShared Access Token\u003e\u0027 -AsPlainText -Force)\nCreate Credential on SQL Server 2016 or higher for use with BACKUP TO URL.\r\nName has to be the full URL for the blob store container that will be the backup target.\r\nPassword needs to be passed the Shared Access Token (SAS Key).",
        "Syntax":  "New-DbaCredential [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Name] \u003cObject[]\u003e] [-Identity] \u003cString[]\u003e [[-SecurePassword] \u003cSecureString\u003e] [[-MappedClassType] \u003cString\u003e] [[-ProviderName] \u003cString\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "New-DbaDacOption",
        "Description":  "Creates a new Microsoft.SqlServer.Dac.DacExtractOptions/DacExportOptions object that can be used during DacPackage extract. Basically saves you the time from remembering the SMO assembly name ;)\n\nSee:\nhttps://msdn.microsoft.com/en-us/library/microsoft.sqlserver.dac.dacexportoptions.aspx\nhttps://msdn.microsoft.com/en-us/library/microsoft.sqlserver.dac.dacextractoptions.aspx\nfor more information",
        "Tags":  [
                     "Migration",
                     "Database",
                     "Dacpac"
                 ],
        "Params":  [
                       [
                           "Type",
                           "Selecting the type of the export: Dacpac (default) or Bacpac.",
                           "",
                           false,
                           "false",
                           "Dacpac"
                       ],
                       [
                           "Action",
                           "Choosing an intended action: Publish or Export.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "PublishXml",
                           "Specifies the publish profile which will include options and sqlCmdVariables.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Kirill Kravtsov (@nvarscar), nvarscar.wordpress.com",
        "Synopsis":  "Creates a new Microsoft.SqlServer.Dac.DacExtractOptions/DacExportOptions object depending on the chosen Type",
        "Name":  "New-DbaDacOption",
        "Links":  "https://dbatools.io/New-DbaDacOption",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003e$options = New-DbaDacOption -Type Dacpac -Action Export\nPS C:\\\u003e $options.ExtractAllTableData = $true\r\nPS C:\\\u003e $options.CommandTimeout = 0\r\nPS C:\\\u003e Export-DbaDacPackage -SqlInstance sql2016 -Database DB1 -Options $options\nUses DacOption object to set the CommandTimeout to 0 then extracts the dacpac for SharePoint_Config on sql2016 to C:\\temp\\SharePoint_Config.dacpac including all table data.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e$options = New-DbaDacOption -Type Dacpac -Action Publish\nPS C:\\\u003e $options.DeployOptions.DropObjectsNotInSource = $true\r\nPS C:\\\u003e Publish-DbaDacPackage -SqlInstance sql2016 -Database DB1 -Options $options -Path c:\\temp\\db.dacpac\nUses DacOption object to set Deployment Options and publish the db.dacpac dacpac file as DB1 on sql2016",
        "Syntax":  "New-DbaDacOption [[-Type] \u003cString\u003e] [-Action] \u003cString\u003e [[-PublishXml] \u003cString\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "New-DbaDacProfile",
        "Description":  "The New-DbaDacProfile command generates a standard publish profile xml file that can be used by the DacFx (this and everything else) to control the deployment of your dacpac\nThis generates a standard template XML which is enough to dpeloy a dacpac but it is highly recommended that you add additional options to the publish profile.\nIf you use Visual Studio you can open a publish.xml file and use the ui to edit the file -\nTo create a new file, right click on an SSDT project, choose \"Publish\" then \"Load Profile\" and load your profile or create a new one.\nOnce you have loaded it in Visual Studio, clicking advanced shows you the list of options available to you.\nFor a full list of options that you can add to the profile, google \"sqlpackage.exe command line switches\" or (https://msdn.microsoft.com/en-us/library/hh550080(v=vs.103).aspx)",
        "Tags":  "Dacpac",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. Alternatively, you can provide a ConnectionString.",
                           "ServerInstance,SqlServer",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to login to servers using alternative logins instead Integrated, accepts Credential object created by Get-Credential",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database name you are targeting",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "Path",
                           "The directory where you would like to save the profile xml file(s).",
                           "",
                           false,
                           "false",
                           "\"$home\\Documents\""
                       ],
                       [
                           "ConnectionString",
                           "The connection string to the database you are upgrading.\nAlternatively, you can provide a SqlInstance (and optionally SqlCredential) and the script will connect and generate the connectionstring.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "PublishOptions",
                           "Optional hashtable to set publish options. Key/value pairs in the hashtable get converted to strings of \"\u003ckey\u003evalue\u003c/key\u003e\".",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "New-DbaPublishProfile",
        "Author":  "Richie lee (@richiebzzzt)",
        "Synopsis":  "Creates a new Publish Profile.",
        "Name":  "New-DbaDacProfile",
        "Links":  "https://dbatools.io/New-DbaDacProfile",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eNew-DbaDacProfile -SqlInstance sql2017 -SqlCredential ad\\sqldba -Database WorldWideImporters -Path C:\\temp\nIn this example, a prompt will appear for alternative credentials, then a connection will be made to sql2017. Using that connection,\r\nthe ConnectionString will be extracted and used within the Publish Profile XML file which will be created at C:\\temp\\sql2017-WorldWideImporters-publish.xml\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eNew-DbaDacProfile -Database WorldWideImporters -Path C:\\temp -ConnectionString \"SERVER=(localdb)\\MSSQLLocalDB;Integrated Security=True;Database=master\"\nIn this example, no connections are made, and a Publish Profile XML would be created at C:\\temp\\localdb-MSSQLLocalDB-WorldWideImporters-publish.xml",
        "Syntax":  "New-DbaDacProfile [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [-Database] \u003cString[]\u003e [[-Path] \u003cString\u003e] [[-ConnectionString] \u003cString[]\u003e] [[-PublishOptions] \u003cHashtable\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "New-DbaDatabase",
        "Description":  "This command creates a new database.\n\nIt allows creation with multiple files, and sets all growth settings to be fixed size rather than percentage growth.",
        "Tags":  "Database",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Name",
                           "The name of the new database or databases to be created.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Collation",
                           "The database collation, if not supplied the default server collation will be used.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Recoverymodel",
                           "The recovery model for the database, if not supplied the recovery model from the model database will be used.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Owner",
                           "The login that will be used as the database owner.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "DataFilePath",
                           "The location that data files will be placed, otherwise the default SQL Server data path will be used.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "LogFilePath",
                           "The location the log file will be placed, otherwise the default SQL Server log path will be used.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "PrimaryFilesize",
                           "The size in MB for the Primary file. If this is less than the primary file size for the model database, then the model size will be used instead.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "PrimaryFileGrowth",
                           "The size in MB that the Primary file will autogrow by.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "PrimaryFileMaxSize",
                           "The maximum permitted size in MB for the Primary File. If this is less the primary file size for the model database, then the model size will be used instead.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "LogSize",
                           "The size in MB that the Transaction log will be created.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "LogGrowth",
                           "The amount in MB that the log file will be set to autogrow by.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "SecondaryFilesize",
                           "The size in MB of the files to be added to the Secondary filegroup. Each file added will be created with this size setting.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "SecondaryFileGrowth",
                           "The amount in MB that the Secondary files will be set to autogrow by. Use 0 for no growth allowed. Each file added will be created with this growth setting.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "SecondaryFileMaxSize",
                           "The maximum permitted size in MB for the Secondary data files to grow to. Each file added will be created with this max size setting.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "SecondaryFileCount",
                           "The number of files to create in the Secondary filegroup for the database.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "DefaultFileGroup",
                           "Sets the default file group. Either primary or secondary.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Matthew Darwin (@evoDBA, naturalselectiondba.wordpress.com)  | Chrissy LeMaire (@cl)",
        "Synopsis":  "Creates a new database",
        "Name":  "New-DbaDatabase",
        "Links":  "https://dbatools.io/New-DbaDatabase",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eNew-DbaDatabase -SqlInstance sql1\nCreates a randomly named database (random-N) on instance sql1\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eNew-DbaDatabase -SqlInstance sql1 -Name dbatools, dbachecks\nCreates a database named dbatools and a database named dbachecks on sql1\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eNew-DbaDatabase -SqlInstance sql1, sql2, sql3 -Name multidb, multidb2 -SecondaryFilesize 20 -SecondaryFileGrowth 20 -LogSize 20 -LogGrowth 20\nCreates two databases, multidb and multidb2, on 3 instances (sql1, sql2 and sql3) and sets the secondary data file size to 20MB, the file growth to 20MB and the log growth to 20MB for each\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eNew-DbaDatabase -SqlInstance sql1 -Name nondefault -DataFilePath M:\\Data -LogFilePath \u0027L:\\Logs with spaces\u0027 -SecondaryFileCount 2\nCreates a database named nondefault and places data files in in the M:\\data directory and log files in \"L:\\Logs with spaces\".\nCreates a secondary group with 2 files in the Secondary filegroup.",
        "Syntax":  "New-DbaDatabase [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Name] \u003cString[]\u003e] [[-Collation] \u003cString\u003e] [[-Recoverymodel] \u003cString\u003e] [[-Owner] \u003cString\u003e] [[-DataFilePath] \u003cString\u003e] [[-LogFilePath] \u003cString\u003e] [[-PrimaryFilesize] \u003cInt32\u003e] [[-PrimaryFileGrowth] \u003cInt32\u003e] [[-PrimaryFileMaxSize] \u003cInt32\u003e] [[-LogSize] \u003cInt32\u003e] [[-LogGrowth] \u003cInt32\u003e] [[-SecondaryFilesize] \u003cInt32\u003e] [[-SecondaryFileGrowth] \u003cInt32\u003e] [[-SecondaryFileMaxSize] \u003cInt32\u003e] [[-SecondaryFileCount] \u003cInt32\u003e] [[-DefaultFileGroup] \u003cString\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "New-DbaDbCertificate",
        "Description":  "Creates a new database certificate. If no database is specified, the certificate will be created in master.",
        "Tags":  "Certificate",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to login to SQL Server using alternative credentials.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Name",
                           "Optional name to create the certificate. Defaults to database name.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database where the certificate will be created. Defaults to master.",
                           "",
                           false,
                           "false",
                           "master"
                       ],
                       [
                           "Subject",
                           "Optional subject to create the certificate.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "StartDate",
                           "Optional secure string used to create the certificate.",
                           "",
                           false,
                           "false",
                           "(Get-Date)"
                       ],
                       [
                           "ExpirationDate",
                           "Optional secure string used to create the certificate.",
                           "",
                           false,
                           "false",
                           "$StartDate.AddYears(5)"
                       ],
                       [
                           "ActiveForServiceBrokerDialog",
                           "Optional secure string used to create the certificate.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "SecurePassword",
                           "Optional password - if no password is supplied, the password will be protected by the master key",
                           "Password",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Enables piping from Get-DbaDatabase",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "New-DbaDatabaseCertificate",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Creates a new database certificate",
        "Name":  "New-DbaDbCertificate",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eNew-DbaDbCertificate -SqlInstance Server1\nYou will be prompted to securely enter your password, then a certificate will be created in the master database on server1 if it does not exist.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eNew-DbaDbCertificate -SqlInstance Server1 -Database db1 -Confirm:$false\nSuppresses all prompts to install but prompts to securely enter your password and creates a certificate in the \u0027db1\u0027 database",
        "Syntax":  "New-DbaDbCertificate [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Name] \u003cString[]\u003e] [[-Database] \u003cString[]\u003e] [[-Subject] \u003cString[]\u003e] [[-StartDate] \u003cDateTime\u003e] [[-ExpirationDate] \u003cDateTime\u003e] [-ActiveForServiceBrokerDialog] [[-SecurePassword] \u003cSecureString\u003e] [[-InputObject] \u003cDatabase[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "New-DbaDbMasterKey",
        "Description":  "Creates a new database master key. If no database is specified, the master key will be created in master.",
        "Tags":  "Certificate",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to login to SQL Server using alternative credentials.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Credential",
                           "Enables easy creation of a secure password.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database where the master key will be created. Defaults to master.",
                           "",
                           false,
                           "false",
                           "master"
                       ],
                       [
                           "SecurePassword",
                           "Secure string used to create the key.",
                           "Password",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Database object piped in from Get-DbaDatabase.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "New-DbaDatabaseMasterKey",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Creates a new database master key",
        "Name":  "New-DbaDbMasterKey",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eNew-DbaDbMasterKey -SqlInstance Server1\nYou will be prompted to securely enter your password, then a master key will be created in the master database on server1 if it does not exist.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eNew-DbaDbMasterKey -SqlInstance Server1 -Credential usernamedoesntmatter\nYou will be prompted by a credential interface to securely enter your password, then a master key will be created in the master database on server1 if it does not exist.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eNew-DbaDbMasterKey -SqlInstance Server1 -Database db1 -Confirm:$false\nSuppresses all prompts to install but prompts in th console to securely enter your password and creates a master key in the \u0027db1\u0027 database",
        "Syntax":  "New-DbaDbMasterKey [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Credential] \u003cPSCredential\u003e] [[-Database] \u003cString[]\u003e] [[-SecurePassword] \u003cSecureString\u003e] [[-InputObject] \u003cDatabase[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "New-DbaDbSnapshot",
        "Description":  "Creates database snapshots without hassles",
        "Tags":  [
                     "Snapshot",
                     "Restore",
                     "Database"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Credential object used to connect to the SQL Server as a different user",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AllDatabases",
                           "Creates snapshot for all eligible databases",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Name",
                           "The specific snapshot name you want to create. Works only if you target a single database. If you need to create multiple snapshot,\r\nyou must use the NameSuffix parameter",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "NameSuffix",
                           "When you pass a simple string, it\u0027ll be appended to use it to build the name of the snapshot. By default snapshots are created with yyyyMMdd_HHmmss suffix\r\nYou can also pass a standard placeholder, in which case it\u0027ll be interpolated (e.g. \u0027{0}\u0027 gets replaced with the database name)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Path",
                           "Snapshot files will be created here (by default the filestructure will be created in the same folder as the base db)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Force",
                           "Databases with Filestream FG can be snapshotted, but the Filestream FG is marked offline\r\nin the snapshot. To create a \"partial\" snapshot, you need to pass -Force explicitely\nNB: You can\u0027t then restore the Database from the newly-created snapshot.\r\nFor details, check https://msdn.microsoft.com/en-us/library/bb895334.aspx",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "InputObject",
                           "Allows Piping from Get-DbaDatabase",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts for confirmation of every step.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "New-DbaDatabaseSnapshot",
        "Author":  "Simone Bizzotto (@niphold)",
        "Synopsis":  "Creates database snapshots",
        "Name":  "New-DbaDbSnapshot",
        "Links":  "https://dbatools.io/New-DbaDbSnapshot",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eNew-DbaDbSnapshot -SqlInstance sqlserver2014a -Database HR, Accounting\nCreates snapshot for HR and Accounting, returning a custom object displaying Server, Database, DatabaseCreated, SnapshotOf, SizeMB, DatabaseCreated, PrimaryFilePath, Status, Notes\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eNew-DbaDbSnapshot -SqlInstance sqlserver2014a -Database HR -Name HR_snap\nCreates snapshot named \"HR_snap\" for HR\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eNew-DbaDbSnapshot -SqlInstance sqlserver2014a -Database HR -NameSuffix \u0027fool_{0}_snap\u0027\nCreates snapshot named \"fool_HR_snap\" for HR\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eNew-DbaDbSnapshot -SqlInstance sqlserver2014a -Database HR, Accounting -Path F:\\snapshotpath\nCreates snapshots for HR and Accounting databases, storing files under the F:\\snapshotpath\\ dir\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eGet-DbaDatabase -SqlInstance sql2016 -Database df | New-DbaDbSnapshot\nCreates a snapshot for the database df on sql2016",
        "Syntax":  "New-DbaDbSnapshot [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [-AllDatabases] [[-Name] \u003cString\u003e] [[-NameSuffix] \u003cString\u003e] [[-Path] \u003cString\u003e] [-Force] [[-InputObject] \u003cDatabase[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "New-DbaDbUser",
        "Description":  "Creates a new user for a specified database with provided specifications.",
        "Tags":  [
                     "Database",
                     "User"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. Defaults to the default instance on localhost.",
                           "ServerInstance,SqlServer",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to login to servers using SQL Logins instead of Windows Authentication (AKA Integrated or Trusted). To use:\n$scred = Get-Credential, then pass $scred object to the -SqlCredential parameter.\nWindows Authentication will be used if SqlCredential is not specified. SQL Server does not accept Windows credentials being passed as credentials.\nTo connect to SQL Server as a different Windows user, run PowerShell as that user.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Specifies the database(s) to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "Specifies the database(s) to exclude from processing. Options for this list are auto-populated from the server. By default, system databases are excluded.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "IncludeSystem",
                           "If this switch is enabled, the user will be added to system databases.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Login",
                           "When specified, the user will be associated to this SQL login and have the same name as the Login.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Username",
                           "When specified, the user will have this name.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Force",
                           "If user exists, drop and recreate.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Frank Henninger (@osiris687)",
        "Synopsis":  "Creates a new user for the specified database.",
        "Name":  "New-DbaDbUser",
        "Links":  "https://dbatools.io/New-DbaDbUser",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eNew-DbaDbUser -SqlInstance sqlserver2014 -Database DB1 -Login user1\nCreates a new sql user with login named user1 in the specified database.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eNew-DbaDbUser -SqlInstance sqlserver2014 -Database DB1 -Username user1\nCreates a new sql user without login named user1 in the specified database.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eNew-DbaDbUser -SqlInstance sqlserver2014 -Database DB1 -Login Login1 -Username user1\nCreates a new sql user named user1 mapped to Login1 in the specified database.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaDbUser -SqlInstance sqlserver1 -Database DB1 | New-DbaDbUser -SqlInstance sqlserver2 -Database DB1\nCopies users from sqlserver1.DB1 to sqlserver2.DB1. Does not copy permissions!",
        "Syntax":  "New-DbaDbUser [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Database \u003cObject[]\u003e] [-ExcludeDatabase \u003cObject[]\u003e] [-IncludeSystem] [-Username \u003cString[]\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nNew-DbaDbUser [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Database \u003cObject[]\u003e] [-ExcludeDatabase \u003cObject[]\u003e] [-IncludeSystem] [-Login \u003cString[]\u003e] [-Username \u003cString[]\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "New-DbaDirectory",
        "Description":  "Uses master.dbo.xp_create_subdir to create the path\nReturns $true if the path can be created, $false otherwise",
        "Tags":  [
                     "Path",
                     "Directory",
                     "Folder"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The SQL Server you want to run the test on.",
                           "ServerInstance,SqlServer",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "Path",
                           "The Path to tests. Can be a file or directory.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "New-DbaSqlDirectory",
        "Author":  "Stuart Moore",
        "Synopsis":  "Creates new path as specified by the path variable",
        "Name":  "New-DbaDirectory",
        "Links":  "https://dbatools.io/New-DbaDirectory",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eNew-DbaDirectory -SqlInstance sqlcluster -Path L:\\MSAS12.MSSQLSERVER\\OLAP\nIf the SQL Server instance sqlcluster can create the path L:\\MSAS12.MSSQLSERVER\\OLAP it will do and return $true, if not it will return $false.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e$credential = Get-Credential\nPS C:\\\u003e New-DbaDirectory -SqlInstance sqlcluster -SqlCredential $credential -Path L:\\MSAS12.MSSQLSERVER\\OLAP\nIf the SQL Server instance sqlcluster can create the path L:\\MSAS12.MSSQLSERVER\\OLAP it will do and return $true, if not it will return $false. Uses a SqlCredential to connect",
        "Syntax":  "New-DbaDirectory [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-Path] \u003cString\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "New-DbaEndpoint",
        "Description":  "Creates endpoints on a SQL Server instance.",
        "Tags":  "Endpoint",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Name",
                           "The name of the endpoint. If a name is not specified, one will be auto-generated.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Type",
                           "The type of endpoint. Defaults to DatabaseMirroring. Options: DatabaseMirroring, ServiceBroker, Soap, TSql",
                           "",
                           false,
                           "false",
                           "DatabaseMirroring"
                       ],
                       [
                           "Protocol",
                           "The type of protocol. Defaults to tcp. Options: Tcp, NamedPipes, Http, Via, SharedMemory",
                           "",
                           false,
                           "false",
                           "Tcp"
                       ],
                       [
                           "Role",
                           "The type of role. Defaults to All. Options: All, None, Partner, Witness",
                           "",
                           false,
                           "false",
                           "All"
                       ],
                       [
                           "EndpointEncryption",
                           "Used to specify the state of encryption on the endpoint. Defaults to required.\r\nDisabled\r\nRequired\r\nSupported",
                           "",
                           false,
                           "false",
                           "Required"
                       ],
                       [
                           "EncryptionAlgorithm",
                           "Specifies an encryption algorithm used on an endpoint. Defaults to Aes.\nOptions are:\r\nAesRC4\r\nAes\r\nNone\r\nRC4\r\nRC4Aes",
                           "",
                           false,
                           "false",
                           "Aes"
                       ],
                       [
                           "Certificate",
                           "Database certificate used for authentication.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Port",
                           "Port for TCP. If one is not provided, it will be autogenerated.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "SslPort",
                           "Port for SSL",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "Owner",
                           "Owner of the endpoint. Defaults to sa.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Creates endpoints on a SQL Server instance.",
        "Name":  "New-DbaEndpoint",
        "Links":  "https://dbatools.io/New-DbaEndpoint",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eNew-DbaEndpoint -SqlInstance localhost\nCreates all Endpoint(s) on the local default SQL Server instance\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eNew-DbaEndpoint -SqlInstance localhost, sql2016\nReturns all Endpoint(s) for the local and sql2016 SQL Server instances",
        "Syntax":  "New-DbaEndpoint [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Name \u003cString\u003e] [-Type \u003cString\u003e] [-Protocol \u003cString\u003e] [-Role \u003cString\u003e] [-EndpointEncryption \u003cString\u003e] [-EncryptionAlgorithm \u003cString\u003e] [-Certificate \u003cString\u003e] [-Port \u003cInt32\u003e] [-SslPort \u003cInt32\u003e] [-Owner \u003cString\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "New-DbaLogin",
        "Description":  "Creates a new SQL Server login with provided specifications",
        "Tags":  [
                     "Login",
                     "Security"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server(s)",
                           "ServerInstance,SqlServer",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to login to SQL Server using alternative credentials",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Login",
                           "The Login name(s)",
                           "Name,LoginName",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Takes the parameters required from a Login object that has been piped into the command",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "LoginRenameHashtable",
                           "Pass a hash table into this parameter to change login names when piping objects into the procedure",
                           "Rename",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SecurePassword",
                           "Secure string used to authenticate the Login",
                           "Password",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "HashedPassword",
                           "Hashed password string used to authenticate the Login",
                           "Hash,PasswordHash",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "MapToCertificate",
                           "Map the login to a certificate",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "MapToAsymmetricKey",
                           "Map the login to an asymmetric key",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "MapToCredential",
                           "Map the login to a credential",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Sid",
                           "Provide an explicit Sid that should be used when creating the account. Can be [byte[]] or hex [string] (\u00270xFFFF...\u0027)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "DefaultDatabase",
                           "Default database for the login",
                           "DefaulDB",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Language",
                           "Login\u0027s default language",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "PasswordExpiration",
                           "Enforces password expiration policy. Requires PasswordPolicy to be enabled. Can be $true or $false(default)",
                           "Expiration,CheckExpiration",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "PasswordPolicy",
                           "Enforces password complexity policy. Can be $true or $false(default)",
                           "Policy,CheckPolicy",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Disabled",
                           "Create the login in a disabled state",
                           "Disable",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "NewSid",
                           "Ignore sids from the piped login object to generate new sids on the server. Useful when copying login onto the same server",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Force",
                           "If login exists, drop and recreate",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Kirill Kravtsov (@nvarscar)",
        "Synopsis":  "Creates a new SQL Server login",
        "Name":  "New-DbaLogin",
        "Links":  "https://dbatools.io/New-DbaLogin",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eNew-DbaLogin -SqlInstance Server1,Server2 -Login Newlogin\nYou will be prompted to securely enter the password for a login [Newlogin]. The login would be created on servers Server1 and Server2 with default parameters.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e$securePassword = Read-Host \"Input password\" -AsSecureString\nPS C:\\\u003e New-DbaLogin -SqlInstance Server1\\sql1 -Login Newlogin -Password $securePassword -PasswordPolicy -PasswordExpiration\nCreates a login on Server1\\sql1 with a predefined password. The login will have password and expiration policies enforced onto it.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaLogin -SqlInstance sql1 -Login Oldlogin | New-DbaLogin -SqlInstance sql1 -LoginRenameHashtable @{Oldlogin = \u0027Newlogin\u0027} -Force -NewSid -Disabled:$false\nCopies a login [Oldlogin] to the same instance sql1 with the same parameters (including password). New login will have a new sid, a new name [Newlogin] and will not be disabled. Existing login \r\n[Newlogin] will be removed prior to creation.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaLogin -SqlInstance sql1 -Login Login1,Login2 | New-DbaLogin -SqlInstance sql2 -PasswordPolicy -PasswordExpiration -DefaultDatabase tempdb -Disabled\nCopies logins [Login1] and [Login2] from instance sql1 to instance sql2, but enforces password and expiration policies for the new logins. New logins will also have a default database set to [tempdb] \r\nand will be created in a disabled state.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eNew-DbaLogin -SqlInstance sql1 -Login domain\\user\nCreates a new Windows Authentication backed login on sql1. The login will be part of the public server role.",
        "Syntax":  "New-DbaLogin [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [[-Login] \u003cString[]\u003e] [-InputObject \u003cObject[]\u003e] [-LoginRenameHashtable \u003cHashtable\u003e] [[-SecurePassword] \u003cSecureString\u003e] [-MapToCredential \u003cString\u003e] [-Sid \u003cObject\u003e] [-DefaultDatabase \u003cString\u003e] [-Language \u003cString\u003e] [-PasswordExpiration] [-PasswordPolicy] [-Disabled] [-NewSid] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nNew-DbaLogin [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Login \u003cString[]\u003e] [-InputObject \u003cObject[]\u003e] [-LoginRenameHashtable \u003cHashtable\u003e] [-MapToAsymmetricKey \u003cString\u003e] [-MapToCredential \u003cString\u003e] [-Sid \u003cObject\u003e] [-Disabled] [-NewSid] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nNew-DbaLogin [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Login \u003cString[]\u003e] [-InputObject \u003cObject[]\u003e] [-LoginRenameHashtable \u003cHashtable\u003e] [-MapToCertificate \u003cString\u003e] [-MapToCredential \u003cString\u003e] [-Sid \u003cObject\u003e] [-Disabled] [-NewSid] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nNew-DbaLogin [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Login \u003cString[]\u003e] [-InputObject \u003cObject[]\u003e] [-LoginRenameHashtable \u003cHashtable\u003e] [-HashedPassword \u003cString\u003e] [-MapToCredential \u003cString\u003e] [-Sid \u003cObject\u003e] [-DefaultDatabase \u003cString\u003e] [-Language \u003cString\u003e] [-PasswordExpiration] [-PasswordPolicy] [-Disabled] [-NewSid] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "New-DbaScriptingOption",
        "Description":  "Creates a new Microsoft.SqlServer.Management.Smo.ScriptingOptions object. Basically saves you the time from remembering the SMO assembly name ;)\n\nSee https://msdn.microsoft.com/en-us/library/microsoft.sqlserver.management.smo.scriptingoptions.aspx for more information",
        "Tags":  [
                     "Migration",
                     "Backup",
                     "DR"
                 ],
        "Params":  [

                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Creates a new Microsoft.SqlServer.Management.Smo.ScriptingOptions object",
        "Name":  "New-DbaScriptingOption",
        "Links":  "https://dbatools.io/New-DbaScriptingOption",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003e$options = New-DbaScriptingOption\nPS C:\\\u003e $options.ScriptDrops = $false\r\nPS C:\\\u003e $options.WithDependencies = $true\r\nPS C:\\\u003e Get-DbaAgentJob -SqlInstance sql2016 | Export-DbaScript -ScriptingOptionObject $options\nExports Agent Jobs with the Scripting Options ScriptDrops set to $false and WithDependencies set to true",
        "Syntax":  "New-DbaScriptingOption [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "New-DbaServiceMasterKey",
        "Description":  "Creates a new service master key in the master database.",
        "Tags":  "Certificate",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to login to SQL Server using alternative credentials.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Credential",
                           "Enables easy creation of a secure password.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SecurePassword",
                           "Secure string used to create the key.",
                           "Password",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Creates a new service master key.",
        "Name":  "New-DbaServiceMasterKey",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eNew-DbaServiceMasterKey -SqlInstance Server1\nYou will be prompted to securely enter your Service Key password, then a master key will be created in the master database on server1 if it does not exist.",
        "Syntax":  "New-DbaServiceMasterKey [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Credential] \u003cPSCredential\u003e] [[-SecurePassword] \u003cSecureString\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "New-DbaSsisCatalog",
        "Description":  "After installing the SQL Server Engine and SSIS you still have to enable the SSIS Catalog. This function will enable the catalog and gives the option of supplying the password.",
        "Tags":  [
                     "SSIS",
                     "SSISDB",
                     "Catalog"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "SQL Server you wish to run the function on.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Credentials used to connect to the SQL Server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Credential",
                           "Use a credential object instead of a securepassword",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SecurePassword",
                           "Required password that will be used for the security key in SSISDB.",
                           "Password",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SsisCatalog",
                           "SSIS catalog name. By default, this is SSISDB.",
                           "",
                           false,
                           "false",
                           "SSISDB"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Stephen Bennett, https://sqlnotesfromtheunderground.wordpress.com/",
        "Synopsis":  "Enables the SSIS Catalog on a SQL Server 2012+",
        "Name":  "New-DbaSsisCatalog",
        "Links":  "https://dbatools.io/New-DbaSsisCatalog",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003e$SecurePassword = Read-Host -AsSecureString -Prompt \"Enter password\"\nPS C:\\\u003e New-DbaSsisCatalog -SqlInstance DEV01 -SecurePassword $SecurePassword\nCreates the SSIS Catalog on server DEV01 with the specified password.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eNew-DbaSsisCatalog -SqlInstance sql2016 -Credential usernamedoesntmatter\nCreates the SSIS Catalog on server DEV01 with the specified password in the credential prompt. As the example username suggets the username does not matter.\r\nThis is simply an easier way to get a secure password.",
        "Syntax":  "New-DbaSsisCatalog [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Credential] \u003cPSCredential\u003e] [[-SecurePassword] \u003cSecureString\u003e] [[-SsisCatalog] \u003cString\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "New-DbatoolsSupportPackage",
        "Description":  "This function creates an extensive debugging package that can help with reproducing and fixing issues.\n\nThe file will be created on the desktop by default and will contain quite a bit of information:\n- OS Information\n- Hardware Information (CPU, Ram, things like that)\n- .NET Information\n- PowerShell Information\n- Your input history\n- The In-Memory message log\n- The In-Memory error log\n- Screenshot of the console buffer (Basically, everything written in your current console, even if you have to scroll upwards to see it.",
        "Tags":  "Debug",
        "Params":  [
                       [
                           "Path",
                           "The folder where to place the output xml in.",
                           "",
                           false,
                           "false",
                           "\"$($env:USERPROFILE)\\Desktop\""
                       ],
                       [
                           "Variables",
                           "Name of additional variables to attach.\r\nThis allows you to add the content of variables to the support package, if you believe them to be relevant to the case.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Friedrich Weinmann (@FredWeinmann)",
        "Synopsis":  "Creates a package of troubleshooting information that can be used by dbatools to help debug issues.",
        "Name":  "New-DbatoolsSupportPackage",
        "Links":  "https://dbatools.io/New-DbatoolsSupportPackage",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eNew-DbatoolsSupportPackage\nCreates a large support pack in order to help us troubleshoot stuff.",
        "Syntax":  "New-DbatoolsSupportPackage [[-Path] \u003cString\u003e] [[-Variables] \u003cString[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "New-DbaXESession",
        "Description":  "Creates a new XESession object - for the dogged (very manual, Import-DbaXESession is recommended). See the following for more info:\n\nhttps://docs.microsoft.com/en-us/sql/relational-databases/extended-events/use-the-powershell-provider-for-extended-events",
        "Tags":  [
                     "ExtendedEvent",
                     "XE",
                     "XEvent"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2008 or higher.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Name",
                           "The Name of the session to be created.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Creates a new XESession object - for the dogged.",
        "Name":  "New-DbaXESession",
        "Links":  "https://dbatools.io/New-DbaXESession",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003e$session = New-DbaXESession -SqlInstance sql2017 -Name XeSession_Test\nPS C:\\\u003e $event = $session.AddEvent(\"sqlserver.file_written\")\r\nPS C:\\\u003e $event.AddAction(\"package0.callstack\")\r\nPS C:\\\u003e $session.Create()\nReturns a new XE Session object from sql2017 then adds an event, an action then creates it.",
        "Syntax":  "New-DbaXESession [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-Name] \u003cString\u003e [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "New-DbaXESmartCsvWriter",
        "Description":  "This response type is used to write Extended Events to a CSV file.",
        "Tags":  [
                     "ExtendedEvent",
                     "XE",
                     "XEvent"
                 ],
        "Params":  [
                       [
                           "OutputFile",
                           "Specifies the path to the output CSV file.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "Overwrite",
                           "Specifies whether any existiting file should be overwritten or not.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Event",
                           "Specifies a list of events to be processed (with others being ignored. By default, all events are processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "OutputColumn",
                           "Specifies the list of columns to output from the events. XESmartTarget will capture in memory and write to the target table only the columns (fields or targets) that are present in this list.\nFields and actions are matched in a case-sensitive manner.\nExpression columns are supported. Specify a column with ColumnName AS Expression to add an expression column (Example: Total AS Reads + Writes)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Filter",
                           "Specifies a filter expression in the same form as you would use in the WHERE clause of a SQL query.\nExample: duration \u003e 10000 AND cpu_time \u003e 10000",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl) | SmartTarget by Gianluca Sartori (@spaghettidba)",
        "Synopsis":  "This response type is used to write Extended Events to a CSV file.",
        "Name":  "New-DbaXESmartCsvWriter",
        "Links":  "https://dbatools.io/New-DbaXESmartCsvWriter",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003e$columns = \"cpu_time\", \"duration\", \"physical_reads\", \"logical_reads\", \"writes\", \"row_count\"\nPS C:\\\u003e $response = New-DbaXESmartCsvWriter -OutputFile c:\\temp\\workload.csv -OutputColumn $columns -OverWrite -Event \"sql_batch_completed\"\r\nPS C:\\\u003e Start-DbaXESmartTarget -SqlInstance localhost\\sql2017 -Session \"Profiler Standard\" -Responder $response\nWrites Extended Events to the file \"C:\\temp\\workload.csv\".",
        "Syntax":  "New-DbaXESmartCsvWriter [-OutputFile] \u003cString\u003e [-Overwrite] [[-Event] \u003cString[]\u003e] [[-OutputColumn] \u003cString[]\u003e] [[-Filter] \u003cString\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "New-DbaXESmartEmail",
        "Description":  "This response type can be used to send an email each time an event is captured.",
        "Tags":  [
                     "ExtendedEvent",
                     "XE",
                     "XEvent"
                 ],
        "Params":  [
                       [
                           "SmtpServer",
                           "Address of the SMTP server for outgoing mail.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "Sender",
                           "Sender\u0027s email address.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "To",
                           "Address of the To recipient(s).",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "Cc",
                           "Address of the Cc recipient(s).",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Bcc",
                           "Address of the Bcc recipient(s).",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Credential",
                           "Credential object containing username and password used to authenticate on the SMTP server. When blank, no authentication is performed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Subject",
                           "Subject of the mail message. Accepts placeholders in the text.\nPlaceholders are in the form {PropertyName}, where PropertyName is one of the fields or actions available in the Event object.\nFor instance, a valid Subject in a configuration file looks like this: \"An event of name {Name} occurred at {collection_time}\"",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "Body",
                           "Body of the mail message. The body can be static text or any property taken from the underlying event. See Subject for a description of how placeholders work.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "Attachment",
                           "Data to attach to the email message. At this time, it can be any of the fields/actions of the underlying event. The data from the field/action is attached to the message as an ASCII stream. A single \r\nattachment is supported.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AttachmentFileName",
                           "File name to assign to the attachment.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "PlainText",
                           "If this switch is enabled, the email will be sent in plain text. By default, HTML formatting is used.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Event",
                           "Each Response can be limited to processing specific events, while ignoring all the other ones. When this attribute is omitted, all events are processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Filter",
                           "You can specify a filter expression by using this attribute. The filter expression is in the same form that you would use in a SQL query. For example, a valid example looks like this: duration \u003e \r\n10000 AND cpu_time \u003e 10000",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl) | SmartTarget by Gianluca Sartori (@spaghettidba)",
        "Synopsis":  "This response type can be used to send an email each time an event is captured.",
        "Name":  "New-DbaXESmartEmail",
        "Links":  "https://dbatools.io/New-DbaXESmartEmail",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003e$params = @{\n\u003e\u003e SmtpServer = \"smtp.ad.local\"\r\n\u003e\u003e To = \"[email protected]\"\r\n\u003e\u003e Sender = \"[email protected]\"\r\n\u003e\u003e Subject = \"Query executed\"\r\n\u003e\u003e Body = \"Query executed at {collection_time}\"\r\n\u003e\u003e Attachment = \"batch_text\"\r\n\u003e\u003e AttachmentFileName = \"query.sql\"\r\n\u003e\u003e }\r\n\u003e\u003e\r\nPS C:\\\u003e $emailresponse = New-DbaXESmartEmail @params\r\nPS C:\\\u003e Start-DbaXESmartTarget -SqlInstance sql2017 -Session querytracker -Responder $emailresponse\nSends an email each time a querytracker event is captured.",
        "Syntax":  "New-DbaXESmartEmail [-SmtpServer] \u003cString\u003e [-Sender] \u003cString\u003e [-To] \u003cString[]\u003e [[-Cc] \u003cString[]\u003e] [[-Bcc] \u003cString[]\u003e] [[-Credential] \u003cPSCredential\u003e] [-Subject] \u003cString\u003e [-Body] \u003cString\u003e [[-Attachment] \u003cString\u003e] [[-AttachmentFileName] \u003cString\u003e] [[-PlainText] \u003cString\u003e] [[-Event] \u003cString[]\u003e] [[-Filter] \u003cString\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "New-DbaXESmartQueryExec",
        "Description":  "This response type executes a T-SQL command against a target database whenever an event is recorded.",
        "Tags":  [
                     "ExtendedEvent",
                     "XE",
                     "XEvent"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2008 or higher.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Specifies the name of the database that contains the target table.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Query",
                           "The T-SQL command to execute. This string can contain placeholders for properties taken from the events.\nPlaceholders are in the form {PropertyName}, where PropertyName is one of the fields or actions available in the Event object.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Event",
                           "Each Response can be limited to processing specific events, while ignoring all the other ones. When this attribute is omitted, all events are processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Filter",
                           "You can specify a filter expression by using this attribute. The filter expression is in the same form that you would use in a SQL query. For example, a valid example looks like this: duration \u003e \r\n10000 AND cpu_time \u003e 10000",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl) | SmartTarget by Gianluca Sartori (@spaghettidba)",
        "Synopsis":  "This response type executes a T-SQL command against a target database whenever an event is recorded.",
        "Name":  "New-DbaXESmartQueryExec",
        "Links":  "https://dbatools.io/New-DbaXESmartQueryExec",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003e$response = New-DbaXESmartQueryExec -SqlInstance sql2017 -Database dbadb -Query \"update table set whatever = 1\"\nPS C:\\\u003e Start-DbaXESmartTarget -SqlInstance sql2017 -Session deadlock_tracker -Responder $response\nExecutes a T-SQL command against dbadb on sql2017 whenever a deadlock event is recorded.",
        "Syntax":  "New-DbaXESmartQueryExec [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cString\u003e] [[-Query] \u003cString\u003e] [-EnableException] [[-Event] \u003cString[]\u003e] [[-Filter] \u003cString\u003e] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "New-DbaXESmartReplay",
        "Description":  "This response type can be used to replay execution related events to a target SQL Server instance. The events that you can replay are of the type sql_batch_completed and rpc_completed: all other events are ignored.",
        "Tags":  [
                     "ExtendedEvent",
                     "XE",
                     "XEvent"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2008 or higher.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Name of the initial catalog to connect to. Statements will be replayed by changing database to the same database where the event was originally captured, so this property only controls the initial \r\ndatabase to connect to.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Event",
                           "Each Response can be limited to processing specific events, while ignoring all the other ones. When this attribute is omitted, all events are processed.",
                           "",
                           false,
                           "false",
                           "sql_batch_completed"
                       ],
                       [
                           "Filter",
                           "Specifies a filter expression in the same form as you would use in the WHERE clause of a SQL query.\nExample: duration \u003e 10000 AND cpu_time \u003e 10000",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "DelaySeconds",
                           "Specifies the duration of the delay in seconds.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "StopOnError",
                           "If this switch is enabled, the replay will be stopped when the first error is encountered. By default, error messages are piped to the log and console output, and replay proceeds.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "ReplayIntervalSeconds",
                           "Specifies the duration of the replay interval in seconds.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl) | SmartTarget by Gianluca Sartori (@spaghettidba)",
        "Synopsis":  "This response type can be used to replay execution related events to a target SQL Server instance.",
        "Name":  "New-DbaXESmartReplay",
        "Links":  "https://dbatools.io/New-DbaXESmartReplay",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003e$response = New-DbaXESmartReplay -SqlInstance sql2017 -Database planning\nPS C:\\\u003e Start-DbaXESmartTarget -SqlInstance sql2016 -Session loadrelay -Responder $response\nReplays events from sql2016 on sql2017 in the planning database. Returns a PowerShell job object.\nTo see a list of all SmartTarget job objects, use Get-DbaXESmartTarget.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e$response = New-DbaXESmartReplay -SqlInstance sql2017 -Database planning\nPS C:\\\u003e Start-DbaXESmartTarget -SqlInstance sql2017 -Session \u0027Profiler Standard\u0027 -Responder $response -NotAsJob\nReplays events from the \u0027Profiler Standard\u0027 session on sql2016 to sql2017\u0027s planning database. Does not run as a job so you can see the raw output.",
        "Syntax":  "New-DbaXESmartReplay [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cString\u003e] [[-Event] \u003cString[]\u003e] [[-Filter] \u003cString\u003e] [[-DelaySeconds] \u003cInt32\u003e] [-StopOnError] [[-ReplayIntervalSeconds] \u003cInt32\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "New-DbaXESmartTableWriter",
        "Description":  "This response type is used to write Extended Events to a database table. The events are temporarily stored in memory before being written to the database at regular intervals.\n\nThe target table can be created manually upfront or you can let the TableAppenderResponse create a target table based on the fields and actions available in the events captured.\n\nThe columns of the target table and the fields/actions of the events are mapped by name (case-sensitive).",
        "Tags":  [
                     "ExtendedEvent",
                     "XE",
                     "XEvent"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2008 or higher.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Specifies the name of the database that contains the target table.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "Table",
                           "Specifies the name of the target table.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "AutoCreateTargetTable",
                           "If this switch is enabled, XESmartTarget will infer the definition of the target table from the columns captured in the Extended Events session.\nIf the target table already exists, it will not be recreated.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "UploadIntervalSeconds",
                           "Specifies the number of seconds XESmartTarget will keep the events in memory before dumping them to the target table. The default is 10 seconds.",
                           "",
                           false,
                           "false",
                           "10"
                       ],
                       [
                           "Event",
                           "Specifies a list of events to be processed (with others being ignored. By default, all events are processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "OutputColumn",
                           "Specifies the list of columns to output from the events. XESmartTarget will capture in memory and write to the target table only the columns (fields or targets) that are present in this list.\nFields and actions are matched in a case-sensitive manner.\nExpression columns are supported. Specify a column with ColumnName AS Expression to add an expression column (Example: Total AS Reads + Writes)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Filter",
                           "Specifies a filter expression in the same form as you would use in the WHERE clause of a SQL query.\nExample: duration \u003e 10000 AND cpu_time \u003e 10000",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl) | SmartTarget by Gianluca Sartori (@spaghettidba)",
        "Synopsis":  "This response type is used to write Extended Events to a database table.",
        "Name":  "New-DbaXESmartTableWriter",
        "Links":  "https://dbatools.io/New-DbaXESmartTableWriter",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003e$columns = \"cpu_time\", \"duration\", \"physical_reads\", \"logical_reads\", \"writes\", \"row_count\", \"batch_text\"\nPS C:\\\u003e $response = New-DbaXESmartTableWriter -SqlInstance sql2017 -Database dbadb -Table deadlocktracker -OutputColumn $columns -Filter \"duration \u003e 10000\"\r\nPS C:\\\u003e Start-DbaXESmartTarget -SqlInstance sql2017 -Session deadlock_tracker -Responder $response\nWrites Extended Events to the deadlocktracker table in dbadb on sql2017.",
        "Syntax":  "New-DbaXESmartTableWriter [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-Database] \u003cString\u003e [-Table] \u003cString\u003e [-AutoCreateTargetTable] [[-UploadIntervalSeconds] \u003cInt32\u003e] [[-Event] \u003cString[]\u003e] [[-OutputColumn] \u003cString[]\u003e] [[-Filter] \u003cString\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Publish-DbaDacPackage",
        "Description":  "Deploying a dacpac uses the DacFx which historically needed to be installed on a machine prior to use. In 2016 the DacFx was supplied by Microsoft as a nuget package (Microsoft.Data.Tools.MSBuild) and this uses that nuget package.",
        "Tags":  [
                     "Migration",
                     "Database",
                     "Dacpac"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Path",
                           "Specifies the filesystem path to the DACPAC",
                           "",
                           true,
                           "true (ByPropertyName)",
                           ""
                       ],
                       [
                           "PublishXml",
                           "Specifies the publish profile which will include options and sqlCmdVariables.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Specifies the name of the database being published.",
                           "",
                           true,
                           "true (ByPropertyName)",
                           ""
                       ],
                       [
                           "ConnectionString",
                           "Specifies the connection string to the database you are upgrading. This is not required if SqlInstance is specified.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "GenerateDeploymentScript",
                           "If this switch is enabled, the publish script will be generated.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "GenerateDeploymentReport",
                           "If this switch is enabled, the publish XML report  will be generated.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "ScriptOnly",
                           "If this switch is enabled, only the change scripts will be generated.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Type",
                           "Selecting the type of the export: Dacpac (default) or Bacpac.",
                           "",
                           false,
                           "false",
                           "Dacpac"
                       ],
                       [
                           "OutputPath",
                           "Specifies the filesystem path (directory) where output files will be generated.",
                           "",
                           false,
                           "false",
                           "\"$home\\Documents\""
                       ],
                       [
                           "IncludeSqlCmdVars",
                           "If this switch is enabled, SqlCmdVars in publish.xml will have their values overwritten.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "DacOption",
                           "Export options for a corresponding export type. Can be created by New-DbaDacOption -Type Dacpac | Bacpac",
                           "Option",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "DacFxPath",
                           "Path to the dac dll. If this is ommited, then the version of dac dll which is packaged with dbatools is used.",
                           "",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Publish-DbaDacpac",
        "Author":  "Richie lee (@richiebzzzt)",
        "Synopsis":  "The Publish-DbaDacPackage command takes a dacpac which is the output from an SSDT project and publishes it to a database. Changing the schema to match the dacpac and also to run any scripts in the dacpac (pre/post deploy scripts).",
        "Name":  "Publish-DbaDacPackage",
        "Links":  "https://dbatools.io/Publish-DbaDacPackage",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003e$options = New-DbaDacOption -Type Dacpac -Action Publish\nPS C:\\\u003e $options.DeployOptions.DropObjectsNotInSource = $true\r\nPS C:\\\u003e Publish-DbaDacPackage -SqlInstance sql2016 -Database DB1 -DacOption $options -Path c:\\temp\\db.dacpac\nUses DacOption object to set Deployment Options and updates DB1 database on sql2016 from the db.dacpac dacpac file, dropping objects that are missing from source\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003ePublish-DbaDacPackage -SqlInstance sql2017 -Database WideWorldImporters -Path C:\\temp\\sql2016-WideWorldImporters.dacpac -PublishXml C:\\temp\\sql2016-WideWorldImporters-publish.xml\nUpdates WideWorldImporters on sql2017 from the sql2016-WideWorldImporters.dacpac using the sql2016-WideWorldImporters-publish.xml publish profile\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eNew-DbaDacProfile -SqlInstance sql2016 -Database db2 -Path C:\\temp\nPS C:\\\u003e Export-DbaDacPackage -SqlInstance sql2016 -Database db2 | Publish-DbaDacPackage -PublishXml C:\\temp\\sql2016-db2-publish.xml -Database db1, db2 -SqlInstance sql2017\nCreates a publish profile at C:\\temp\\sql2016-db2-publish.xml, exports the .dacpac to $home\\Documents\\sql2016-db2.dacpac\r\nthen publishes it to the sql2017 server database db2\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003e$loc = \"C:\\Users\\bob\\source\\repos\\Microsoft.Data.Tools.Msbuild\\lib\\net46\\Microsoft.SqlServer.Dac.dll\"\nPS C:\\\u003e Publish-DbaDacPackage -SqlInstance \"local\" -Database WideWorldImporters -Path C:\\temp\\WideWorldImporters.dacpac -PublishXml C:\\temp\\WideWorldImporters.publish.xml -DacFxPath $loc\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003ePublish-DbaDacPackage -SqlInstance sql2017 -Database WideWorldImporters -Path C:\\temp\\sql2016-WideWorldImporters.dacpac -PublishXml C:\\temp\\sql2016-WideWorldImporters-publish.xml \r\n-GenerateDeploymentScript -ScriptOnly\nDoes not deploy the changes, but will generate the deployment script that would be executed against WideWorldImporters.\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003ePublish-DbaDacPackage -SqlInstance sql2017 -Database WideWorldImporters -Path C:\\temp\\sql2016-WideWorldImporters.dacpac -PublishXml C:\\temp\\sql2016-WideWorldImporters-publish.xml \r\n-GenerateDeploymentReport -ScriptOnly\nDoes not deploy the changes, but will generate the deployment report that would be executed against WideWorldImporters.",
        "Syntax":  "Publish-DbaDacPackage [-SqlInstance \u003cDbaInstanceParameter[]\u003e] [-SqlCredential \u003cPSCredential\u003e] -Path \u003cString\u003e -Database \u003cString[]\u003e [-ConnectionString \u003cString[]\u003e] [-ScriptOnly] [-Type \u003cString\u003e] [-OutputPath \u003cString\u003e] [-IncludeSqlCmdVars] [-DacOption \u003cObject\u003e] [-EnableException] [-DacFxPath \u003cString\u003e] [\u003cCommonParameters\u003e]\nPublish-DbaDacPackage [-SqlInstance \u003cDbaInstanceParameter[]\u003e] [-SqlCredential \u003cPSCredential\u003e] -Path \u003cString\u003e -PublishXml \u003cString\u003e -Database \u003cString[]\u003e [-ConnectionString \u003cString[]\u003e] [-GenerateDeploymentScript] [-GenerateDeploymentReport] [-ScriptOnly] [-Type \u003cString\u003e] [-OutputPath \u003cString\u003e] [-IncludeSqlCmdVars] [-EnableException] [-DacFxPath \u003cString\u003e] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Read-DbaAuditFile",
        "Description":  "Read Audit details from *.sqlaudit files.",
        "Tags":  [
                     "ExtendedEvent",
                     "Audit"
                 ],
        "Params":  [
                       [
                           "Path",
                           "The path to the *.sqlaudit file. This is relative to the computer executing the command. UNC paths are supported.",
                           "FullName",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Exact",
                           "If this switch is enabled, only an exact search will be used for the Path. By default, this command will add a wildcard to the Path because Eventing uses the file name as a template and adds \r\ncharacters.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Raw",
                           "If this switch is enabled, the Microsoft.SqlServer.XEvent.Linq.PublishedEvent enumeration object will be returned.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Read Audit details from *.sqlaudit files.",
        "Name":  "Read-DbaAuditFile",
        "Links":  "https://dbatools.io/Read-DbaAuditFile",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRead-DbaAuditFile -Path C:\\temp\\logins.sqlaudit\nReturns events from C:\\temp\\logins.sqlaudit.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-ChildItem C:\\temp\\audit\\*.sqlaudit | Read-DbaAuditFile\nReturns events from all .sqlaudit files in C:\\temp\\audit.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaServerAudit -SqlInstance sql2014 -Audit LoginTracker | Read-DbaAuditFile\nReads remote Audit details by accessing the file over the admin UNC share.",
        "Syntax":  "Read-DbaAuditFile [-Path] \u003cObject[]\u003e [-Exact] [-Raw] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Read-DbaBackupHeader",
        "Description":  "Reads full, differential and transaction log backups. An online SQL Server is required to parse the backup files and the path specified must be relative to that SQL Server.",
        "Tags":  [
                     "DisasterRecovery",
                     "Backup",
                     "Restore"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Path",
                           "Path to SQL Server backup file. This can be a full, differential or log backup file. Accepts valid filesystem paths and URLs.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Simple",
                           "If this switch is enabled, fewer columns are returned, giving an easy overview.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "FileList",
                           "If this switch is enabled, detailed information about the files within the backup is returned.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "AzureCredential",
                           "Name of the SQL Server credential that should be used for Azure storage access.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message. This avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because \r\nit basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Reads and displays detailed information about a SQL Server backup.",
        "Name":  "Read-DbaBackupHeader",
        "Links":  "https://dbatools.io/Read-DbaBackupHeader",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRead-DbaBackupHeader -SqlInstance sql2016 -Path S:\\backups\\mydb\\mydb.bak\nLogs into sql2016 using Windows authentication and reads the local file on sql2016, S:\\backups\\mydb\\mydb.bak.\nIf you are running this command on a workstation and connecting remotely, remember that sql2016 cannot access files on your own workstation.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eRead-DbaBackupHeader -SqlInstance sql2016 -Path \\\\nas\\sql\\backups\\mydb\\mydb.bak, \\\\nas\\sql\\backups\\otherdb\\otherdb.bak\nLogs into sql2016 and reads two backup files - mydb.bak and otherdb.bak. The SQL Server service account must have rights to read this file.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eRead-DbaBackupHeader -SqlInstance . -Path C:\\temp\\myfile.bak -Simple\nLogs into the local workstation (or computer) and shows simplified output about C:\\temp\\myfile.bak. The SQL Server service account must have rights to read this file.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003e$backupinfo = Read-DbaBackupHeader -SqlInstance . -Path C:\\temp\\myfile.bak\nPS C:\\\u003e $backupinfo.FileList\nDisplays detailed information about each of the datafiles contained in the backupset.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eRead-DbaBackupHeader -SqlInstance . -Path C:\\temp\\myfile.bak -FileList\nAlso returns detailed information about each of the datafiles contained in the backupset.\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003e\"C:\\temp\\myfile.bak\", \"\\backupserver\\backups\\myotherfile.bak\" | Read-DbaBackupHeader -SqlInstance sql2016  | Where-Object { $_.BackupSize.Megabyte -gt 100 }\nReads the two files and returns only backups larger than 100 MB\n-------------------------- EXAMPLE 7 --------------------------\nPS C:\\\u003eGet-ChildItem \\\\nas\\sql\\*.bak | Read-DbaBackupHeader -SqlInstance sql2016\nGets a list of all .bak files on the \\\\nas\\sql share and reads the headers using the server named \"sql2016\". This means that the server, sql2016, must have read access to the \\\\nas\\sql share.\n-------------------------- EXAMPLE 8 --------------------------\nPS C:\\\u003eRead-DbaBackupHeader -Path https://dbatoolsaz.blob.core.windows.net/azbackups/restoretime/restoretime_201705131850.bak -AzureCredential AzureBackupUser\nGets the backup header information from the SQL Server backup file stored at https://dbatoolsaz.blob.core.windows.net/azbackups/restoretime/restoretime_201705131850.bak on Azure",
        "Syntax":  "Read-DbaBackupHeader [-SqlInstance] \u003cDbaInstanceParameter\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-Path] \u003cObject[]\u003e [-Simple] [-FileList] [[-AzureCredential] \u003cString\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Read-DbaTraceFile",
        "Description":  "Using the fn_trace_gettable function, a trace file is read and returned as a PowerShell object\n\nThis function returns the whole of the trace file. The information is presented in the format that the trace subsystem uses.",
        "Tags":  [
                     "Security",
                     "Trace"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByPropertyName)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "true (ByPropertyName)",
                           ""
                       ],
                       [
                           "Path",
                           "Path to the trace file. This path is relative to the SQL Server instance.",
                           "",
                           false,
                           "true (ByPropertyName)",
                           ""
                       ],
                       [
                           "Database",
                           "Search for results only with specific DatabaseName. Uses IN for comparisons.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Login",
                           "Search for results only with specific Logins. Uses IN for comparisons.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Spid",
                           "Search for results only with specific Spids. Uses IN for comparisons.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EventClass",
                           "Search for results only with specific EventClasses. Uses IN for comparisons.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ObjectType",
                           "Search for results only with specific ObjectTypes. Uses IN for comparisons.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ErrorId",
                           "Search for results only with specific Errors. Filters \u0027Error in ($ErrorId)\u0027  Uses IN for comparisons.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EventSequence",
                           "Search for results only with specific EventSequences. Uses IN for comparisons.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "TextData",
                           "Search for results only with specific TextData. Uses LIKE for comparisons.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ApplicationName",
                           "Search for results only with specific ApplicationNames. Uses LIKE for comparisons.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ObjectName",
                           "Search for results only with specific ObjectNames. Uses LIKE for comparisons.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Where",
                           "Custom where clause - use without the word \"WHERE\". Here are the available columns:\nTextData\r\nBinaryData\r\nDatabaseID\r\nTransactionID\r\nLineNumber\r\nNTUserName\r\nNTDomainName\r\nHostName\r\nClientProcessID\r\nApplicationName\r\nLoginName\r\nSPID\r\nDuration\r\nStartTime\r\nEndTime\r\nReads\r\nWrites\r\nCPU\r\nPermissions\r\nSeverity\r\nEventSubClass\r\nObjectID\r\nSuccess\r\nIndexID\r\nIntegerData\r\nServerName\r\nEventClass\r\nObjectType\r\nNestLevel\r\nState\r\nError\r\nMode\r\nHandle\r\nObjectName\r\nDatabaseName\r\nFileName\r\nOwnerName\r\nRoleName\r\nTargetUserName\r\nDBUserName\r\nLoginSid\r\nTargetLoginName\r\nTargetLoginSid\r\nColumnPermissions\r\nLinkedServerName\r\nProviderName\r\nMethodName\r\nRowCounts\r\nRequestID\r\nXactSequence\r\nEventSequence\r\nBigintData1\r\nBigintData2\r\nGUID\r\nIntegerData2\r\nObjectID2\r\nType\r\nOwnerID\r\nParentName\r\nIsSystem\r\nOffset\r\nSourceDatabaseID\r\nSqlHandle\r\nSessionLoginName\r\nPlanHandle\r\nGroupID",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Reads SQL Server trace files",
        "Name":  "Read-DbaTraceFile",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRead-DbaTraceFile -SqlInstance sql2016 -Database master, tempdb -Path C:\\traces\\big.trc\nReads the tracefile C:\\traces\\big.trc, stored on the sql2016 sql server. Filters only results that have master or tempdb as the DatabaseName.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eRead-DbaTraceFile -SqlInstance sql2016 -Database master, tempdb -Path C:\\traces\\big.trc -TextData \u0027EXEC SP_PROCOPTION\u0027\nReads the tracefile C:\\traces\\big.trc, stored on the sql2016 sql server.\r\nFilters only results that have master or tempdb as the DatabaseName and that have \u0027EXEC SP_PROCOPTION\u0027 somewhere in the text.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eRead-DbaTraceFile -SqlInstance sql2016 -Path C:\\traces\\big.trc -Where \"LinkedServerName = \u0027myls\u0027 and StartTime \u003e \u00275/30/2017 4:27:52 PM\u0027\"\nReads the tracefile C:\\traces\\big.trc, stored on the sql2016 sql server.\r\nFilters only results where LinkServerName = myls and StartTime is greater than \u00275/30/2017 4:27:52 PM\u0027.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaTrace -SqlInstance sql2014 | Read-DbaTraceFile\nReads every trace file on sql2014",
        "Syntax":  "Read-DbaTraceFile [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Path \u003cString[]\u003e] [-Database \u003cString[]\u003e] [-Login \u003cString[]\u003e] [-Spid \u003cInt32[]\u003e] [-EventClass \u003cString[]\u003e] [-ObjectType \u003cString[]\u003e] [-ErrorId \u003cInt32[]\u003e] [-EventSequence \u003cInt32[]\u003e] [-TextData \u003cString[]\u003e] [-ApplicationName \u003cString[]\u003e] [-ObjectName \u003cString[]\u003e] [-Where \u003cString\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Read-DbaTransactionLog",
        "Description":  "Using the fn_dblog function, the live transaction log is read and returned as a PowerShell object\n\nThis function returns the whole of the log. The information is presented in the format that the logging subsystem uses.\n\nA soft limit of 0.5GB of log as been implemented. This is based on testing. This limit can be overridden\nat the users request, but please be aware that this may have an impact on your target databases and on the\nsystem running this function",
        "Tags":  [
                     "Database",
                     "Log",
                     "LogFile"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances",
                           "ServerInstance,SqlServer",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "A credential to use to connect to the SQL Instance rather than using Windows Authentication",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Database to read the transaction log of",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "IgnoreLimit",
                           "Switch to indicate that you wish to bypass the recommended limits of the function",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "RowLimit",
                           "Will limit the number of rows returned from the transaction log",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Stuart Moore (@napalmgram), stuart-moore.com",
        "Synopsis":  "Reads the live Transaction log from specified SQL Server Database",
        "Name":  "Read-DbaTransactionLog",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003e$Log = Read-DbaTransactionLog -SqlInstance sql2016 -Database MyDatabase\nWill read the contents of the transaction log of MyDatabase on SQL Server Instance sql2016 into the local PowerShell object $Log\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e$Log = Read-DbaTransactionLog -SqlInstance sql2016 -Database MyDatabase -IgnoreLimit\nWill read the contents of the transaction log of MyDatabase on SQL Server Instance sql2016 into the local PowerShell object $Log, ignoring the recommendation of not returning more that 0.5GB of log",
        "Syntax":  "Read-DbaTransactionLog [-SqlInstance] \u003cDbaInstanceParameter\u003e [-SqlCredential \u003cPSCredential\u003e] -Database \u003cObject\u003e [-IgnoreLimit] [-RowLimit \u003cInt32\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Read-DbaXEFile",
        "Description":  "Read XEvents from a *.xel or *.xem file.",
        "Tags":  [
                     "ExtendedEvent",
                     "XE",
                     "XEvent"
                 ],
        "Params":  [
                       [
                           "Path",
                           "The path to the *.xem or *.xem file. This is relative to the computer executing the command. UNC paths are supported.",
                           "FullName",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Exact",
                           "If this switch is enabled, only an exact search will be used for the Path. By default, this command will add a wildcard to the Path because Eventing uses the file name as a template and adds \r\ncharacters.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Raw",
                           "If this switch is enabled, the Microsoft.SqlServer.XEvent.Linq.PublishedEvent enumeration object will be returned.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Read-DbaXEventFile",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Read XEvents from a *.xel or *.xem file.",
        "Name":  "Read-DbaXEFile",
        "Links":  "https://dbatools.io/Read-DbaXEFile",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRead-DbaXEFile -Path C:\\temp\\deadocks.xel\nReturns events from C:\\temp\\deadocks.xel.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-ChildItem C:\\temp\\xe\\*.xel | Read-DbaXEFile\nReturns events from all .xel files in C:\\temp\\xe.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaXESession -SqlInstance sql2014 -Session deadlocks | Read-DbaXEFile\nReads remote XEvents by accessing the file over the admin UNC share.",
        "Syntax":  "Read-DbaXEFile [-Path] \u003cObject[]\u003e [-Exact] [-Raw] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Register-DbatoolsConfig",
        "Description":  "Registers an existing configuration object in registry.\nThis allows simple persisting of settings across powershell consoles.\nIt also can be used to generate a registry template, which can then be used to create policies.",
        "Params":  [
                       [
                           "Config",
                           "The configuration object to write to registry.\r\nCan be retrieved using Get-DbatoolsConfig.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "FullName",
                           "The full name of the setting to be written to registry.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Module",
                           "The name of the module, whose settings should be written to registry.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "Name",
                           "Default: \"*\"\r\nUsed in conjunction with the -Module parameter to restrict the number of configuration items written to registry.",
                           "",
                           false,
                           "false",
                           "*"
                       ],
                       [
                           "Scope",
                           "Default: UserDefault\r\nWho will be affected by this export how? Current user or all? Default setting or enforced?\r\nLegal values: UserDefault, UserMandatory, SystemDefault, SystemMandatory",
                           "",
                           false,
                           "false",
                           "UserDefault"
                       ],
                       [
                           "EnableException",
                           "This parameters disables user-friendly warnings and enables the throwing of exceptions.\r\nThis is less user friendly, but allows catching exceptions in calling scripts.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Register-DbaConfig",
        "Synopsis":  "Registers an existing configuration object in registry.",
        "Name":  "Register-DbatoolsConfig",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbatoolsConfig message.style.* | Register-DbatoolsConfig\nRetrieves all configuration items that that start with message.style. and registers them in registry for the current user.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eRegister-DbatoolsConfig -FullName \"message.consoleoutput.disable\" -Scope SystemDefault\nRetrieves the configuration item \"message.consoleoutput.disable\" and registers it in registry as the default setting for all users on this machine.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eRegister-DbatoolsConfig -Module Message -Scope SystemMandatory\nRetrieves all configuration items of the module Message, then registers them in registry to enforce them for all users on the current system.",
        "Syntax":  "Register-DbatoolsConfig [[-Config] \u003cConfig[]\u003e] [[-FullName] \u003cString[]\u003e] [-Scope {UserDefault | UserMandatory | SystemDefault | SystemMandatory | FileUserLocal | FileUserShared | FileSystem}] [-EnableException] [\u003cCommonParameters\u003e]\nRegister-DbatoolsConfig [-Module] \u003cString\u003e [[-Name] \u003cString\u003e] [-Scope {UserDefault | UserMandatory | SystemDefault | SystemMandatory | FileUserLocal | FileUserShared | FileSystem}] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Remove-DbaAgDatabase",
        "Description":  "Removes a database from an availability group on a SQL Server instance.",
        "Tags":  [
                     "AvailabilityGroup",
                     "HA",
                     "AG"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. Server version must be SQL Server version 2012 or higher.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the SqlInstance instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database or databases to remove.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AvailabilityGroup",
                           "Only remove databases from specific availability groups.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Enables piping from Get-DbaDatabase",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Removes a database from an availability group on a SQL Server instance.",
        "Name":  "Remove-DbaAgDatabase",
        "Links":  "https://dbatools.io/Remove-DbaAgDatabase",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRemove-DbaAgDatabase -SqlInstance sqlserver2012 -AvailabilityGroup ag1, ag2 -Confirm:$false\nRemoves the ag1 and ag2 availability groups on sqlserver2012.  Does not prompt for confirmation.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaAvailabilityGroup -SqlInstance sqlserver2012 -AvailabilityGroup availabilitygroup1 | Remove-DbaAgDatabase\nRemoves the availability groups returned from the Get-DbaAvailabilityGroup function. Prompts for confirmation.",
        "Syntax":  "Remove-DbaAgDatabase [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cString[]\u003e] [[-AvailabilityGroup] \u003cString[]\u003e] [[-InputObject] \u003cObject[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Remove-DbaAgentJob",
        "Description":  "Remove-DbaAgentJob removes a job in the SQL Server Agent.",
        "Tags":  [
                     "Agent",
                     "Job"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.",
                           "ServerInstance,SqlServer",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Job",
                           "The name of the job. Can be null if the the job id is being used.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "KeepHistory",
                           "Specifies to keep the history for the job. By default history is deleted.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "KeepUnusedSchedule",
                           "Specifies to keep the schedules attached to this job if they are not attached to any other job.\r\nBy default the unused schedule is deleted.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Mode",
                           "Default: Strict\r\nHow strict does the command take lesser issues?\r\nStrict: Interrupt if the job specified doesn\u0027t exist.\r\nLazy:   Silently skip over jobs that don\u0027t exist.",
                           "",
                           false,
                           "false",
                           "(Get-DbatoolsConfigValue -FullName \u0027message.mode.default\u0027 -Fallback \"Strict\")"
                       ],
                       [
                           "InputObject",
                           "Accepts piped input from Get-DbaAgentJob",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Sander Stad (@sqlstad, sqlstad.nl)",
        "Synopsis":  "Remove-DbaAgentJob removes a job.",
        "Name":  "Remove-DbaAgentJob",
        "Links":  "https://dbatools.io/Remove-DbaAgentJob",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRemove-DbaAgentJob -SqlInstance sql1 -Job Job1\nRemoves the job from the instance with the name Job1\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGetDbaAgentJob -SqlInstance sql1 -Job Job1 | Remove-DbaAgentJob -KeepHistory\nRemoves teh job but keeps the history\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eRemove-DbaAgentJob -SqlInstance sql1 -Job Job1 -KeepUnusedSchedule\nRemoves the job but keeps the unused schedules\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eRemove-DbaAgentJob -SqlInstance sql1, sql2, sql3 -Job Job1\nRemoves the job from multiple servers",
        "Syntax":  "Remove-DbaAgentJob [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Job] \u003cObject[]\u003e] [-KeepHistory] [-KeepUnusedSchedule] [[-Mode] {Strict | Lazy | Report}] [[-InputObject] \u003cJob[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Remove-DbaAgentJobCategory",
        "Description":  "Remove-DbaAgentJobCategory makes it possible to remove a job category.\nBe assured that the category you want to remove is not used with other jobs. If another job uses this category it will be get the category [Uncategorized (Local)].",
        "Tags":  [
                     "Agent",
                     "Job",
                     "JobCategory"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2000 or greater.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Category",
                           "The name of the category",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Force",
                           "The force parameter will ignore some errors in the parameters and assume defaults.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Sander Stad (@sqlstad, sqlstad.nl)",
        "Synopsis":  "Remove-DbaAgentJobCategory removes a job category.",
        "Name":  "Remove-DbaAgentJobCategory",
        "Links":  "https://dbatools.io/Remove-DbaAgentJobCategory",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRemove-DbaAgentJobCategory -SqlInstance sql1 -Category \u0027Category 1\u0027\nRemove the job category Category 1 from the instance.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eRemove-DbaAgentJobCategory -SqlInstance sql1 -Category Category1, Category2, Category3\nRemove multiple job categories from the instance.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eRemove-DbaAgentJobCategory -SqlInstance sql1, sql2, sql3 -Category Category1, Category2, Category3\nRemove multiple job categories from the multiple instances.",
        "Syntax":  "Remove-DbaAgentJobCategory [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Category] \u003cString[]\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Remove-DbaAgentJobStep",
        "Description":  "Removes a job step from a SQL Server Agent job.",
        "Tags":  [
                     "Agent",
                     "Job",
                     "JobStep"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Job",
                           "The name of the job.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "StepName",
                           "The name of the job step.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "Mode",
                           "Default: Strict\r\nHow strict does the command take lesser issues?\r\nStrict: Interrupt if the configuration already has the same value as the one specified.\r\nLazy:   Silently skip over instances that already have this configuration at the specified value.",
                           "",
                           false,
                           "false",
                           "(Get-DbatoolsConfigValue -Name \u0027message.mode.default\u0027 -Fallback \"Strict\")"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Sander Stad (@sqlstad), sqlstad.nl",
        "Synopsis":  "Removes a step from the specified SQL Agent job.",
        "Name":  "Remove-DbaAgentJobStep",
        "Links":  "https://dbatools.io/Remove-DbaAgentJobStep",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRemove-DbaAgentJobStep -SqlInstance sql1 -Job Job1 -StepName Step1\nRemove \u0027Step1\u0027 from job \u0027Job1\u0027 on sql1.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eRemove-DbaAgentJobStep -SqlInstance sql1 -Job Job1, Job2, Job3 -StepName Step1\nRemove the job step from multiple jobs.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eRemove-DbaAgentJobStep -SqlInstance sql1, sql2, sql3 -Job Job1 -StepName Step1\nRemove the job step from the job on multiple servers.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003esql1, sql2, sql3 | Remove-DbaAgentJobStep -Job Job1 -StepName Step1\nRemove the job step from the job on multiple servers using pipeline.",
        "Syntax":  "Remove-DbaAgentJobStep [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-Job] \u003cObject[]\u003e [-StepName] \u003cString\u003e [[-Mode] {Strict | Lazy | Report}] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Remove-DbaAgentSchedule",
        "Description":  "Remove-DbaAgentJobSchedule removes a job in the SQL Server Agent.",
        "Tags":  [
                     "Agent",
                     "Job",
                     "Schedule"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2000 or greater.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Schedule",
                           "The name of the job schedule.",
                           "Schedules",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "A collection of schedule (such as returned by Get-DbaAgentSchedule), to be removed.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Force",
                           "The force parameter will ignore some errors in the parameters and assume defaults.\r\nIt will also remove the any present schedules with the same name for the specific job.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Sander Stad (@sqlstad), sqlstad.nl",
        "Synopsis":  "Remove-DbaAgentJobSchedule removes a job schedule.",
        "Name":  "Remove-DbaAgentSchedule",
        "Links":  "https://dbatools.io/Remove-DbaAgentJobSchedule",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRemove-DbaAgentSchedule -SqlInstance sql1 -Schedule weekly\nRemove the schedule weekly\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eRemove-DbaAgentSchedule -SqlInstance sql1 -Schedule weekly -Force\nRemove the schedule weekly from the job even if the schedule is being used by another job.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eRemove-DbaAgentSchedule -SqlInstance sql1 -Schedule daily, weekly\nRemove multiple schedule\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eRemove-DbaAgentSchedule -SqlInstance sql1, sql2, sql3 -Schedule daily, weekly\nRemove the schedule on multiple servers for multiple schedules\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003esql1, sql2, sql3 | Remove-DbaAgentSchedule -Schedule daily, weekly\nRemove the schedule on multiple servers using pipe line\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eGet-DbaAgentSchedule -SqlInstance sql1 -Schedule sched1, sched2, sched3 | Remove-DbaAgentSchedule\nRemove the schedules using a pipeline",
        "Syntax":  "Remove-DbaAgentSchedule -SqlInstance \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] -Schedule \u003cObject[]\u003e [-EnableException] [-Force] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nRemove-DbaAgentSchedule [-SqlCredential \u003cPSCredential\u003e] -InputObject \u003cScheduleBase[]\u003e [-EnableException] [-Force] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Remove-DbaAgListener",
        "Description":  "Removes a listener from an availability group on a SQL Server instance.",
        "Tags":  [
                     "AvailabilityGroup",
                     "HA",
                     "AG"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. Server version must be SQL Server version 2012 or higher.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the SqlInstance instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Listener",
                           "The listener or listeners to remove.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AvailabilityGroup",
                           "Only remove listeners from specific availability groups.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Enables piping from Get-DbaListener",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Removes a listener from an availability group on a SQL Server instance.",
        "Name":  "Remove-DbaAgListener",
        "Links":  "https://dbatools.io/Remove-DbaAgListener",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRemove-DbaAgListener -SqlInstance sqlserver2012 -AvailabilityGroup ag1, ag2 -Confirm:$false\nRemoves the ag1 and ag2 availability groups on sqlserver2012. Does not prompt for confirmation.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaAvailabilityGroup -SqlInstance sqlserver2012 -AvailabilityGroup availabilitygroup1 | Remove-DbaAgListener\nRemoves the listeners returned from the Get-DbaAvailabilityGroup function. Prompts for confirmation.",
        "Syntax":  "Remove-DbaAgListener [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Listener] \u003cString[]\u003e] [[-AvailabilityGroup] \u003cString[]\u003e] [[-InputObject] \u003cAvailabilityGroupListener[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Remove-DbaAgReplica",
        "Description":  "Removes availability group replicas from availability groups.",
        "Tags":  [
                     "AG",
                     "HA",
                     "AvailabilityGroup",
                     "Replica"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. Server version must be SQL Server version 2012 or higher.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the SqlInstance instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AvailabilityGroup",
                           "The specific availability group to query.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Replica",
                           "The replica to remove.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Enables piped input from Get-DbaAgReplica.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Removes availability group replicas from availability groups.",
        "Name":  "Remove-DbaAgReplica",
        "Links":  "https://dbatools.io/Remove-DbaAgReplica",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRemove-DbaAgReplica -SqlInstance sql2017a -AvailabilityGroup SharePoint -Replica sp1\nRemoves the sp1 replica from the SharePoint ag on sql2017a. Prompts for confirmation.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eRemove-DbaAgReplica -SqlInstance sql2017a | Select-Object *\nReturns full object properties on all availability group replicas found on sql2017a",
        "Syntax":  "Remove-DbaAgReplica [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-AvailabilityGroup] \u003cString[]\u003e] [[-Replica] \u003cString[]\u003e] [[-InputObject] \u003cAvailabilityReplica[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Remove-DbaAvailabilityGroup",
        "Description":  "Removes availability groups on a SQL Server instance.\n\nIf possible, remove the availability group only while connected to the server instance that hosts the primary replica.\nWhen the availability group is dropped from the primary replica, changes are allowed in the former primary databases (without high availability protection).\nDeleting an availability group from a secondary replica leaves the primary replica in the RESTORING state, and changes are not allowed on the databases.\n\nAvoid dropping an availability group when the Windows Server Failover Clustering (WSFC) cluster has no quorum.\nIf you must drop an availability group while the cluster lacks quorum, the metadata availability group that is stored in the cluster is not removed.\nAfter the cluster regains quorum, you will need to drop the availability group again to remove it from the WSFC cluster.\n\nFor more information: https://docs.microsoft.com/en-us/sql/t-sql/statements/drop-availability-group-transact-sql",
        "Tags":  [
                     "AvailabilityGroup",
                     "HA",
                     "AG"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. Server version must be SQL Server version 2012 or higher.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the SqlInstance instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AvailabilityGroup",
                           "Only remove specific availability groups.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AllAvailabilityGroups",
                           "Remove all availability groups on an instance.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "InputObject",
                           "Enables piping from Get-DbaAvailabilityGroup.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Removes availability groups on a SQL Server instance.",
        "Name":  "Remove-DbaAvailabilityGroup",
        "Links":  "https://dbatools.io/Remove-DbaAvailabilityGroup",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRemove-DbaAvailabilityGroup -SqlInstance sqlserver2012 -AllAvailabilityGroups\nRemoves all availability groups on the sqlserver2014 instance. Prompts for confirmation.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eRemove-DbaAvailabilityGroup -SqlInstance sqlserver2012 -AvailabilityGroup ag1, ag2 -Confirm:$false\nRemoves the ag1 and ag2 availability groups on sqlserver2012.  Does not prompt for confirmation.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaAvailabilityGroup -SqlInstance sqlserver2012 -AvailabilityGroup availabilitygroup1 | Remove-DbaAvailabilityGroup\nRemoves the availability groups returned from the Get-DbaAvailabilityGroup function. Prompts for confirmation.",
        "Syntax":  "Remove-DbaAvailabilityGroup [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-AvailabilityGroup] \u003cString[]\u003e] [-AllAvailabilityGroups] [[-InputObject] \u003cAvailabilityGroup[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Remove-DbaBackup",
        "Description":  "Removes SQL Server backups from disk.\n\nProvides all of the same functionality for removing SQL backups from disk as a standard maintenance plan would.\n\nAs an addition you have the ability to check the Archive bit on files before deletion. This will allow you to ensure backups have been archived to your archive location before removal.\n\nAlso included is the ability to remove empty folders as part of this cleanup activity.",
        "Tags":  [
                     "Storage",
                     "DisasterRecovery",
                     "Backup"
                 ],
        "Params":  [
                       [
                           "Path",
                           "Specifies the name of the base level folder to search for backup files. Deletion of backup files will be recursive from this location.",
                           "BackupFolder",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "BackupFileExtension",
                           "Specifies the filename extension of the backup files you wish to remove (typically \u0027bak\u0027, \u0027trn\u0027 or \u0027log\u0027). Do not include the period.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "RetentionPeriod",
                           "Specifies the retention period for backup files. Correct format is ##U.\n## is the retention value and must be an integer value\r\nU signifies the units where the valid units are:\r\nh = hours\r\nd = days\r\nw = weeks\r\nm = months\nFormatting Examples:\r\n\u002748h\u0027 = 48 hours\r\n\u00277d\u0027 = 7 days\r\n\u00274w\u0027 = 4 weeks\r\n\u00271m\u0027 = 1 month",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "CheckArchiveBit",
                           "If this switch is enabled, the filesystem Archive bit is checked before deletion. If this bit is set (which translates to \"it has not been backed up to another location yet\", the file won\u0027t be \r\ndeleted.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "RemoveEmptyBackupFolder",
                           "If this switch is enabled, empty folders will be removed after the cleanup process is complete.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.i",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chris Sommer (@cjsommer), www.cjsommer.com",
        "Synopsis":  "Removes SQL Server backups from disk.",
        "Name":  "Remove-DbaBackup",
        "Links":  "https://dbatools.io/Remove-DbaBackup",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRemove-DbaBackup -Path \u0027C:\\MSSQL\\SQL Backup\\\u0027 -BackupFileExtension trn -RetentionPeriod 48h\n\u0027*.trn\u0027 files in \u0027C:\\MSSQL\\SQL Backup\\\u0027 and all subdirectories that are more than 48 hours old will be removed.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eRemove-DbaBackup -Path \u0027C:\\MSSQL\\SQL Backup\\\u0027 -BackupFileExtension trn -RetentionPeriod 48h -WhatIf\nSame as example #1, but doesn\u0027t actually remove any files. The function will instead show you what would be done.\r\nThis is useful when first experimenting with using the function.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eRemove-DbaBackup -Path \u0027C:\\MSSQL\\Backup\\\u0027 -BackupFileExtension bak -RetentionPeriod 7d -CheckArchiveBit\n\u0027*.bak\u0027 files in \u0027C:\\MSSQL\\Backup\\\u0027 and all subdirectories that are more than 7 days old will be removed, but only if the files have been backed up to another location as verified by checking the \r\nArchive bit.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eRemove-DbaBackup -Path \u0027C:\\MSSQL\\Backup\\\u0027 -BackupFileExtension bak -RetentionPeriod 1w -RemoveEmptyBackupFolder\n\u0027*.bak\u0027 files in \u0027C:\\MSSQL\\Backup\\\u0027 and all subdirectories that are more than 1 week old will be removed. Any folders left empty will be removed as well.",
        "Syntax":  "Remove-DbaBackup [-Path] \u003cString\u003e [-BackupFileExtension] \u003cString\u003e [-RetentionPeriod] \u003cString\u003e [-CheckArchiveBit] [-RemoveEmptyBackupFolder] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Remove-DbaClientAlias",
        "Description":  "Removes a sql alias for the specified server by altering HKLM:\\SOFTWARE\\Microsoft\\MSSQLServer\\Client - mimics cliconfg.exe.",
        "Tags":  "Alias",
        "Params":  [
                       [
                           "ComputerName",
                           "The target computer where the alias will be created.",
                           "",
                           false,
                           "true (ByPropertyName)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Allows you to login to remote computers using alternative credentials",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Alias",
                           "The alias or array of aliases to be deleted",
                           "AliasName",
                           true,
                           "true (ByPropertyName)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Removes a sql alias for the specified server - mimics cliconfg.exe",
        "Name":  "Remove-DbaClientAlias",
        "Links":  "https://dbatools.io/Remove-DbaClientAlias",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRemove-DbaClientAlias -ComputerName workstationx -Alias sqlps\nRemoves the sqlps SQL client alias on workstationx\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaClientAlias | Remove-DbaClientAlias\nRemoves all SQL Server client aliases on the local computer",
        "Syntax":  "Remove-DbaClientAlias [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [-Alias] \u003cString[]\u003e [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Remove-DbaCmConnection",
        "Description":  "Removes connection objects from the connection cache used for remote computer management.",
        "Tags":  [
                     "ComputerManagement",
                     "CIM"
                 ],
        "Params":  [
                       [
                           "ComputerName",
                           "The target computer. Accepts both text as well as the output of Get-DbaCmConnection.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Friedrich Weinmann (@FredWeinmann)",
        "Synopsis":  "Removes connection objects from the connection cache used for remote computer management.",
        "Name":  "Remove-DbaCmConnection",
        "Links":  "https://dbatools.io/Remove-DbaCmConnection",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRemove-DbaCmConnection -ComputerName sql2014\nRemoves the cached connection to the server sql2014 from the cache.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaCmConnection | Remove-DbaCmConnection\nClears the entire connection cache.",
        "Syntax":  "Remove-DbaCmConnection [-ComputerName] \u003cDbaCmConnectionParameter[]\u003e [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Remove-DbaCmsRegServer",
        "Description":  "Removes registered servers found in SQL Server Central Management Server (CMS).",
        "Tags":  [
                     "RegisteredServer",
                     "CMS"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Name",
                           "Specifies one or more names to include. Name is the visible name in SSMS CMS interface (labeled Registered Server Name)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ServerName",
                           "Specifies one or more server names to include. Server Name is the actual instance name (labeled Server Name)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Group",
                           "Specifies one or more groups to include from SQL Server Central Management Server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Allows results from Get-DbaCmsRegServer to be piped in",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Remove-DbaRegisteredServer",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Removes registered servers found in SQL Server Central Management Server (CMS).",
        "Name":  "Remove-DbaCmsRegServer",
        "Links":  "https://dbatools.io/Remove-DbaCmsRegServer",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRemove-DbaCmsRegServer -SqlInstance sql2012 -Group HR, Accounting\nRemoves all servers from the HR and Accounting groups on sql2012\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eRemove-DbaCmsRegServer -SqlInstance sql2012 -Group HR\\Development\nRemoves all servers from the HR and sub-group Development from the CMS on sql2012.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eRemove-DbaCmsRegServer -SqlInstance sql2012 -Confirm:$false\nRemoves all registered servers on sql2012 and turns off all prompting",
        "Syntax":  "Remove-DbaCmsRegServer [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Name] \u003cString[]\u003e] [[-ServerName] \u003cString[]\u003e] [[-Group] \u003cString[]\u003e] [[-InputObject] \u003cRegisteredServer[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Remove-DbaCmsRegServerGroup",
        "Description":  "Returns an array of Server Groups found in the CMS.",
        "Tags":  [
                     "RegisteredServer",
                     "CMS"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Name",
                           "Specifies one or more groups to include from SQL Server Central Management Server.",
                           "Group",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Allows results from Get-DbaCmsRegServerGroup to be piped in",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Remove-DbaRegisteredServerGroup",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Gets list of Server Groups objects stored in SQL Server Central Management Server (CMS).",
        "Name":  "Remove-DbaCmsRegServerGroup",
        "Links":  "https://dbatools.io/Remove-DbaCmsRegServerGroup",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRemove-DbaCmsRegServerGroup -SqlInstance sql2012 -Group HR, Accounting\nRemoves the HR and Accounting groups on sql2012\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eRemove-DbaCmsRegServerGroup -SqlInstance sql2012 -Group HR\\Development -Confirm:$false\nRemoves the Development subgroup within the HR group on sql2012 and turns off all prompting",
        "Syntax":  "Remove-DbaCmsRegServerGroup [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Name] \u003cString[]\u003e] [[-InputObject] \u003cServerGroup[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Remove-DbaComputerCertificate",
        "Description":  "Removes a computer certificate from a local or remote compuer",
        "Tags":  "Certificate",
        "Params":  [
                       [
                           "ComputerName",
                           "The target computer. Defaults to localhost.",
                           "ServerInstance,SqlServer,SqlInstance",
                           false,
                           "false",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Allows you to login to $ComputerName using alternative credentials",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Thumbprint",
                           "The thumbprint of the certificate object",
                           "",
                           true,
                           "true (ByPropertyName)",
                           ""
                       ],
                       [
                           "Store",
                           "Certificate store - defaults to LocalMachine (otherwise exceptions can be thrown on remote connections)",
                           "",
                           false,
                           "false",
                           "LocalMachine"
                       ],
                       [
                           "Folder",
                           "Certificate folder",
                           "",
                           false,
                           "false",
                           "My"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Removes a computer certificate - useful for removing easily certs from remote computers",
        "Name":  "Remove-DbaComputerCertificate",
        "Links":  "https://dbatools.io/Remove-DbaComputerCertificate",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRemove-DbaComputerCertificate -ComputerName Server1 -Thumbprint C2BBE81A94FEE7A26FFF86C2DFDAF6BFD28C6C94\nRemoves certificate with thumbprint C2BBE81A94FEE7A26FFF86C2DFDAF6BFD28C6C94 in the LocalMachine store on Server1\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaComputerCertificate | Where-Object Thumbprint -eq E0A071E387396723C45E92D42B2D497C6A182340 | Remove-DbaComputerCertificate\nRemoves certificate using the pipeline\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eRemove-DbaComputerCertificate -ComputerName Server1 -Thumbprint C2BBE81A94FEE7A26FFF86C2DFDAF6BFD28C6C94 -Store User -Folder My\nRemoves certificate with thumbprint C2BBE81A94FEE7A26FFF86C2DFDAF6BFD28C6C94 in the User\\My (Personal) store on Server1",
        "Syntax":  "Remove-DbaComputerCertificate [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [-Thumbprint] \u003cString[]\u003e [[-Store] \u003cString\u003e] [[-Folder] \u003cString\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Remove-DbaDatabase",
        "Description":  "Tries a bunch of different ways to remove a database or two or more.",
        "Tags":  [
                     "Delete",
                     "Databases"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.You must have sysadmin access and server version must be SQL Server version 2000 or higher.",
                           "ServerInstance,SqlServer",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "A collection of databases (such as returned by Get-DbaDatabase), to be removed.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "IncludeSystemDb",
                           "Use this switch to disable any kind of verbose messages",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Drops a database, hopefully even the really stuck ones.",
        "Name":  "Remove-DbaDatabase",
        "Links":  "https://dbatools.io/Remove-DbaDatabase",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRemove-DbaDatabase -SqlInstance sql2016 -Database containeddb\nPrompts then removes the database containeddb on SQL Server sql2016\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eRemove-DbaDatabase -SqlInstance sql2016 -Database containeddb, mydb\nPrompts then removes the databases containeddb and mydb on SQL Server sql2016\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eRemove-DbaDatabase -SqlInstance sql2016 -Database containeddb -Confirm:$false\nDoes not prompt and swiftly removes containeddb on SQL Server sql2016\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaDatabase -SqlInstance server\\instance -ExcludeSystem | Remove-DbaDatabase\nRemoves all the user databases from server\\instance\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eGet-DbaDatabase -SqlInstance server\\instance -ExcludeSystem | Remove-DbaDatabase -Confirm:$false\nRemoves all the user databases from server\\instance without any confirmation",
        "Syntax":  "Remove-DbaDatabase [-SqlCredential \u003cPSCredential\u003e] [-IncludeSystemDb] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nRemove-DbaDatabase -SqlInstance \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] -Database \u003cObject[]\u003e [-IncludeSystemDb] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nRemove-DbaDatabase [-SqlCredential \u003cPSCredential\u003e] -InputObject \u003cDatabase[]\u003e [-IncludeSystemDb] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Remove-DbaDatabaseSafely",
        "Description":  "Performs a DBCC CHECKDB on the database, backs up the database with Checksum and verify only to a final (golden) backup location, creates an Agent Job to restore from that backup, drops the database, runs the agent job to restore the database, performs a DBCC CHECKDB and drops the database.\n\nWith huge thanks to Grant Fritchey and his verify your backups video. Take a look, it\u0027s only 3 minutes long. http://sqlps.io/backuprant",
        "Tags":  [
                     "Database",
                     "Remove"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2000 or higher.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Specifies one or more databases to remove.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Destination",
                           "If specified, Agent jobs will be created on this server. By default, the jobs will be created on the server specified by SqlInstance. You must have sysadmin access and the server must be SQL Server \r\n2000 or higher. The SQL Agent service will be started if it is not already running.",
                           "",
                           false,
                           "false",
                           "$sqlinstance"
                       ],
                       [
                           "DestinationCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "NoDbccCheckDb",
                           "If this switch is enabled, the initial DBCC CHECK DB will be skipped. This will make the process quicker but will also allow you to create an Agent job that restores a database backup containing a \r\ncorrupt database.\nA second DBCC CHECKDB is performed on the restored database so you will still be notified BUT USE THIS WITH CARE.",
                           "NoCheck",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "BackupFolder",
                           "Specifies the path to a folder where the final backups of the removed databases will be stored. If you are using separate source and destination servers, you must specify a UNC path such as  \r\n\\\\SERVER1\\BACKUPSHARE\\",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "CategoryName",
                           "Specifies the Category Name for the Agent job that is created for restoring the database(s). By default, the name is \"Rationalisation\".",
                           "",
                           false,
                           "false",
                           "Rationalisation"
                       ],
                       [
                           "JobOwner",
                           "Specifies the name of the account which will own the Agent jobs. By default, sa is used.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AllDatabases",
                           "If this switch is enabled, all user databases on the server will be removed. This is useful when decommissioning a server. You should use a Destination with this switch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "BackupCompression",
                           "If this switch is enabled, compression will be used for the backup regardless of the SQL Server instance setting. By default, the SQL Server instance setting for backup compression is used.",
                           "",
                           false,
                           "false",
                           "Default"
                       ],
                       [
                           "ReuseSourceFolderStructure",
                           "If this switch is enabled, the source folder structure will be used when restoring instead of using the destination instance default folder structure.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Force",
                           "If this switch is enabled, all actions will be performed even if DBCC errors are detected. An Agent job will be created with \u0027DBCCERROR\u0027 in the name and the backup file will have \u0027DBCC\u0027 in its name.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Remove-SqlDatabaseSafely",
        "Author":  "Rob Sewell (@SQLDBAWithBeard), sqldbawithabeard.com",
        "Synopsis":  "Safely removes a SQL Database and creates an Agent Job to restore it.",
        "Name":  "Remove-DbaDatabaseSafely",
        "Links":  "https://dbatools.io/Remove-DbaDatabaseSafely",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRemove-DbaDatabaseSafely -SqlInstance \u0027Fade2Black\u0027 -Database RideTheLightning -BackupFolder \u0027C:\\MSSQL\\Backup\\Rationalised - DO NOT DELETE\u0027\nPerforms a DBCC CHECKDB on database RideTheLightning on server Fade2Black. If there are no errors, the database is backup to the folder C:\\MSSQL\\Backup\\Rationalised - DO NOT DELETE. Then, an Agent \r\njob to restore the database from that backup is created. The database is then dropped, the Agent job to restore it run, a DBCC CHECKDB run against the restored database, and then it is dropped again.\nAny DBCC errors will be written to your documents folder\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e$Database = \u0027DemoNCIndex\u0027,\u0027RemoveTestDatabase\u0027\nPS C:\\\u003e Remove-DbaDatabaseSafely -SqlInstance \u0027Fade2Black\u0027 -Database $Database -BackupFolder \u0027C:\\MSSQL\\Backup\\Rationalised - DO NOT DELETE\u0027\nPerforms a DBCC CHECKDB on two databases, \u0027DemoNCIndex\u0027 and \u0027RemoveTestDatabase\u0027 on server Fade2Black. Then, an Agent job to restore each database from those backups is created. The databases are \r\nthen dropped, the Agent jobs to restore them run, a DBCC CHECKDB run against the restored databases, and then they are dropped again.\nAny DBCC errors will be written to your documents folder\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eRemove-DbaDatabaseSafely -SqlInstance \u0027Fade2Black\u0027 -Destination JusticeForAll -Database RideTheLightning -BackupFolder \u0027\\\\BACKUPSERVER\\BACKUPSHARE\\MSSQL\\Rationalised - DO NOT DELETE\u0027\nPerforms a DBCC CHECKDB on database RideTheLightning on server Fade2Black. If there are no errors, the database is backup to the folder \\\\BACKUPSERVER\\BACKUPSHARE\\MSSQL\\Rationalised - DO NOT DELETE . \r\nThen, an Agent job is created on server JusticeForAll to restore the database from that backup is created. The database is then dropped on Fade2Black, the Agent job to restore it on JusticeForAll is \r\nrun, a DBCC CHECKDB run against the restored database, and then it is dropped from JusticeForAll.\nAny DBCC errors will be written to your documents folder\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eRemove-DbaDatabaseSafely -SqlInstance IronMaiden -Database $Database -Destination TheWildHearts -BackupFolder Z:\\Backups -NoDbccCheckDb -JobOwner \u0027THEBEARD\\Rob\u0027\nFor the databases $Database on the server IronMaiden a DBCC CHECKDB will not be performed before backing up the databases to the folder Z:\\Backups. Then, an Agent job is created on server \r\nTheWildHearts with a Job Owner of THEBEARD\\Rob to restore each database from that backup using the instance\u0027s default file paths. The database(s) is(are) then dropped on IronMaiden, the Agent job(s) \r\nrun, a DBCC CHECKDB run on the restored database(s), and then the database(s) is(are) dropped.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eRemove-DbaDatabaseSafely -SqlInstance IronMaiden -Database $Database -Destination TheWildHearts -BackupFolder Z:\\Backups\nThe databases $Database on the server IronMaiden will be backed up the to the folder Z:\\Backups. Then, an Agent job is created on server TheWildHearts with a Job Owner of THEBEARD\\Rob to restore each \r\ndatabase from that backup using the instance\u0027s default file paths. The database(s) is(are) then dropped on IronMaiden, the Agent job(s) run, a DBCC CHECKDB run on the restored database(s), and then \r\nthe database(s) is(are) dropped.\nIf there is a DBCC Error, the function  will continue to perform rest of the actions and will create an Agent job with \u0027DBCCERROR\u0027 in the name and a Backup file with \u0027DBCCError\u0027 in the name.",
        "Syntax":  "Remove-DbaDatabaseSafely [-SqlInstance] \u003cDbaInstanceParameter\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-Destination] \u003cDbaInstanceParameter\u003e] [[-DestinationCredential] \u003cPSCredential\u003e] [-NoDbccCheckDb] [-BackupFolder] \u003cString\u003e [[-CategoryName] \u003cString\u003e] [[-JobOwner] \u003cString\u003e] [-AllDatabases] [[-BackupCompression] \u003cString\u003e] [-ReuseSourceFolderStructure] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Remove-DbaDbBackupRestoreHistory",
        "Description":  "Reduces the size of the backup and restore history tables by deleting the entries for backup sets.\n\nCan be used at server level, in this case a retention period -KeepDays can be set (default is 30 days).\nCan also be used at database level, in this case the complete history for the database(s) is deleted.\n\nThe backup and restore history tables reside in the msdb database.\n\nTo periodically remove old data from backup and restore history tables it is recommended to schedule the agent job sp_delete_backuphistory from the\nSQL Server Maintenance Solution created by Ola Hallengren (https://ola.hallengren.com).",
        "Tags":  "Delete",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2000 or higher.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "KeepDays",
                           "The number of days of history to keep. Defaults to 30 days.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "Database",
                           "The database(s) to process. If unspecified, all databases will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Enables piped input from Get-DbaDatabase",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "IJeb Reitsma",
        "Synopsis":  "Reduces the size of the backup and restore history tables by deleting old entries for backup sets.",
        "Name":  "Remove-DbaDbBackupRestoreHistory",
        "Links":  "https://dbatools.io/Remove-DbaDbBackupRestoreHistory",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRemove-DbaDbBackupRestoreHistory -SqlInstance sql2016\nPrompts for confirmation then deletes backup and restore history on SQL Server sql2016 older than 30 days (default period)\nPS C:\\\u003e Remove-DbaDbBackupRestoreHistory -SqlInstance sql2016 -KeepDays 100 -Confirm:$false\nRemove backup and restore history on SQL Server sql2016 older than 100 days. Does not prompt for confirmation.\nPS C:\\\u003e Remove-DbaDbBackupRestoreHistory -SqlInstance sql2016 -Database db1\nPrompts for confirmation then deletes all backup and restore history for database db1 on SQL Server sql2016\nPS C:\\\u003e Get-DbaDatabase -SqlInstance sql2016 | Remove-DbaDbBackupRestoreHistory -WhatIf\nRemove complete backup and restore history for all databases on SQL Server sql2016",
        "Syntax":  "Remove-DbaDbBackupRestoreHistory [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-KeepDays] \u003cInt32\u003e] [[-Database] \u003cString[]\u003e] [[-InputObject] \u003cDatabase[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Remove-DbaDbCertificate",
        "Description":  "Deletes specified database certificate",
        "Tags":  "Certificate",
        "Params":  [
                       [
                           "SqlInstance",
                           "The SQL Server to create the certificates on.",
                           "ServerInstance,SqlServer",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to login to SQL Server using alternative credentials.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database where the certificate will be removed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Certificate",
                           "The certificate that will be removed",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Piped certificate objects",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Remove-DbaDatabaseCertificate",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Deletes specified database certificate",
        "Name":  "Remove-DbaDbCertificate",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRemove-DbaDbCertificate -SqlInstance Server1\nThe certificate in the master database on server1 will be removed if it exists.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eRemove-DbaDbCertificate -SqlInstance Server1 -Database db1 -Confirm:$false\nSuppresses all prompts to remove the certificate in the \u0027db1\u0027 database and drops the key.",
        "Syntax":  "Remove-DbaDbCertificate [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cString[]\u003e] [[-Certificate] \u003cString[]\u003e] [[-InputObject] \u003cCertificate[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Remove-DbaDbMasterKey",
        "Description":  "Deletes specified database master key",
        "Tags":  [
                     "Certificate",
                     "Masterkey"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to login to SQL Server using alternative credentials",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database where the master key will be removed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "List of databases to exclude from clearing all master keys",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "All",
                           "Purge the master keys from all databases on an instance",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "InputObject",
                           "Enables pipeline input from Get-DbaDatabase",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Remove-DbaDatabaseMasterKey",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Deletes specified database master key",
        "Name":  "Remove-DbaDbMasterKey",
        "Links":  "https://dbatools.io/Remove-DbaMasterKey",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRemove-DbaDbMasterKey -SqlInstance sql2017, sql2016 -Database pubs\nThe master key in the pubs database on sql2017 and sql2016 will be removed if it exists.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eRemove-DbaDbMasterKey -SqlInstance sql2017 -Database db1 -Confirm:$false\nSuppresses all prompts to remove the master key in the \u0027db1\u0027 database and drops the key.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaDbMasterKey -SqlInstance sql2017 -Database db1 | Remove-DbaDbMasterKey -Confirm:$false\nSuppresses all prompts to remove the master key in the \u0027db1\u0027 database and drops the key.",
        "Syntax":  "Remove-DbaDbMasterKey [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cString[]\u003e] [[-ExcludeDatabase] \u003cString[]\u003e] [-All] [[-InputObject] \u003cMasterKey[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Remove-DbaDbMirror",
        "Description":  "Removes database mirrors. Does not set databases in recovery to recovered.",
        "Tags":  [
                     "Mirror",
                     "HA"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function\r\nto be executed against multiple SQL Server instances.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The target database.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Allows piping from Get-DbaDatabase.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Removes database mirrors.",
        "Name":  "Remove-DbaDbMirror",
        "Links":  "https://dbatools.io/Set-DbaDbMirror",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eSet-DbaDbMirror -SqlInstance localhost\nReturns all Endpoint(s) on the local default SQL Server instance\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eSet-DbaDbMirror -SqlInstance localhost, sql2016\nReturns all Endpoint(s) for the local and sql2016 SQL Server instances",
        "Syntax":  "Remove-DbaDbMirror [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cString[]\u003e] [[-InputObject] \u003cDatabase[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Remove-DbaDbMirrorMonitor",
        "Description":  "Stops and deletes the mirroring monitor job for all the databases on the server instance.\n\nBasically executes sp_dbmmonitordropmonitoring.",
        "Tags":  [
                     "Mirror",
                     "HA",
                     "Monitor"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternate Windows or SQL Login Authentication. Accepts credential objects (Get-Credential).",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Stops and deletes the mirroring monitor job for all the databases on the server instance.",
        "Name":  "Remove-DbaDbMirrorMonitor",
        "Links":  "https://dbatools.io/Remove-DbaDbMirrorMonitor",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRemove-DbaDbMirrorMonitor -SqlInstance sql2008, sql2012\nStops and deletes the mirroring monitor job for all the databases on sql2008 and sql2012.",
        "Syntax":  "Remove-DbaDbMirrorMonitor [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Remove-DbaDbSnapshot",
        "Description":  "Removes (drops) database snapshots from the server",
        "Tags":  [
                     "Snapshot",
                     "Database"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances",
                           "ServerInstance,SqlServer",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Credential object used to connect to the SQL Server as a different user",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Removes snapshots for only this specific base db",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "Removes snapshots excluding this specific base dbs",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Snapshot",
                           "Restores databases from snapshot with this name only",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Enables input from Get-DbaDbSnapshot",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "AllSnapshots",
                           "Specifies that you want to remove all snapshots from the server",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Force",
                           "Will forcibly kill all running queries that prevent the drop process.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts for confirmation of every step.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Remove-DbaDatabaseSnapshot",
        "Author":  "Simone Bizzotto (@niphold)",
        "Synopsis":  "Removes database snapshots",
        "Name":  "Remove-DbaDbSnapshot",
        "Links":  "https://dbatools.io/Remove-DbaDbSnapshot",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRemove-DbaDbSnapshot -SqlInstance sql2014 -Snapshot HR_snap_20161201, HR_snap_20161101\nRemoves database snapshots named HR_snap_20161201 and HR_snap_20161101\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eRemove-DbaDbSnapshot -SqlInstance sql2014 -Database HR, Accounting\nRemoves all database snapshots having HR and Accounting as base dbs\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaDbSnapshot -SqlInstance sql2014 -Database HR, Accounting | Remove-DbaDbSnapshot\nRemoves all database snapshots having HR and Accounting as base dbs\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eRemove-DbaDbSnapshot -SqlInstance sql2014 -Snapshot HR_snapshot, Accounting_snapshot\nRemoves HR_snapshot and Accounting_snapshot\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eGet-DbaDbSnapshot -SqlInstance sql2016 | Where SnapshotOf -like \u0027*dumpsterfire*\u0027 | Remove-DbaDbSnapshot\nRemoves all snapshots associated with databases that have dumpsterfire in the name\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eGet-DbaDbSnapshot -SqlInstance sql2016 | Out-GridView -Passthru | Remove-DbaDbSnapshot\nAllows the selection of snapshots on sql2016 to remove\n-------------------------- EXAMPLE 7 --------------------------\nPS C:\\\u003eRemove-DbaDbSnapshot -SqlInstance sql2014 -AllSnapshots\nRemoves all database snapshots from sql2014\n-------------------------- EXAMPLE 8 --------------------------\nPS C:\\\u003eRemove-DbaDbSnapshot -SqlInstance sql2014 -AllSnapshots -Confirm\nRemoves all database snapshots from sql2014 and prompts for each database",
        "Syntax":  "Remove-DbaDbSnapshot [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cString[]\u003e] [[-ExcludeDatabase] \u003cString[]\u003e] [[-Snapshot] \u003cString[]\u003e] [[-InputObject] \u003cDatabase[]\u003e] [-AllSnapshots] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Remove-DbaDbUser",
        "Description":  "If user is the owner of a schema with the same name and if if the schema does not have any underlying objects the schema will be\ndropped.  If user owns more than one schema, the owner of the schemas that does not have the same name as the user, will be\nchanged to \u0027dbo\u0027. If schemas have underlying objects, you must specify the -Force parameter so the user can be dropped.",
        "Tags":  [
                     "Database",
                     "User",
                     "Login",
                     "Security"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Credential object used to connect to the SQL Server as a different user.",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Specifies the database(s) to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "Specifies the database(s) to exclude from processing. Options for this list are auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "User",
                           "Specifies the list of users to remove.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Support piping from Get-DbaDbUser.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Force",
                           "If enabled this will force the change of the owner to \u0027dbo\u0027 for any schema which owner is the User.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Doug Meyers (@dgmyrs)",
        "Synopsis":  "Drop database user",
        "Name":  "Remove-DbaDbUser",
        "Links":  "https://dbatools.io/Remove-DbaDbUser",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRemove-DbaDbUser -SqlInstance sqlserver2014 -User user1\nDrops user1 from all databases it exists in on server \u0027sqlserver2014\u0027.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eRemove-DbaDbUser -SqlInstance sqlserver2014 -Database database1 -User user1\nDrops user1 from the database1 database on server \u0027sqlserver2014\u0027.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eRemove-DbaDbUser -SqlInstance sqlserver2014 -ExcludeDatabase model -User user1\nDrops user1 from all databases it exists in on server \u0027sqlserver2014\u0027 except for the model database.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaDbUser sqlserver2014 | Where-Object Name -In \"user1\" | Remove-DbaDbUser\nDrops user1 from all databases it exists in on server \u0027sqlserver2014\u0027.",
        "Syntax":  "Remove-DbaDbUser [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Database \u003cObject[]\u003e] [-ExcludeDatabase \u003cObject[]\u003e] -User \u003cObject[]\u003e [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nRemove-DbaDbUser -InputObject \u003cUser[]\u003e [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Remove-DbaEndpoint",
        "Description":  "Removes endpoints from a SQL Server instance.",
        "Tags":  "Endpoint",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EndPoint",
                           "Only remove specific endpoints.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AllEndpoints",
                           "Remove all endpoints on an instance.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "InputObject",
                           "Enables piping from Get-Endpoint.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Removes endpoints from a SQL Server instance.",
        "Name":  "Remove-DbaEndpoint",
        "Links":  "https://dbatools.io/Remove-DbaEndpoint",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRemove-DbaEndpoint -SqlInstance sqlserver2012 -AllEndpoints\nRemoves all endpoints on the sqlserver2014 instance. Prompts for confirmation.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eRemove-DbaEndpoint -SqlInstance sqlserver2012 -Endpoint endpoint1,endpoint2 -Confirm:$false\nRemoves the endpoint1 and endpoint2 endpoints. Does not prompt for confirmation.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaEndpoint -SqlInstance sqlserver2012 -Endpoint endpoint1 | Remove-DbaEndpoint\nRemoves the endpoints returned from the Get-DbaEndpoint function. Prompts for confirmation.",
        "Syntax":  "Remove-DbaEndpoint [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-EndPoint] \u003cString[]\u003e] [-AllEndpoints] [[-InputObject] \u003cEndpoint[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Remove-DbaLogin",
        "Description":  "Tries a bunch of different ways to remove a Login or two or more.",
        "Tags":  [
                     "Delete",
                     "Login"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to login to servers using alternative credentials.",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Login",
                           "The Login(s) to process - this list is auto-populated from the server. If unspecified, all Logins will be processed.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "A collection of Logins (such as returned by Get-DbaLogin), to be removed.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Force",
                           "Kills any sessions associated with the login prior to drop",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Drops a Login",
        "Name":  "Remove-DbaLogin",
        "Links":  "https://dbatools.io/Remove-DbaLogin",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRemove-DbaLogin -SqlInstance sql2016 -Login mylogin\nPrompts then removes the Login mylogin on SQL Server sql2016\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eRemove-DbaLogin -SqlInstance sql2016 -Login mylogin, yourlogin\nPrompts then removes the Logins mylogin and yourlogin on SQL Server sql2016\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eRemove-DbaLogin -SqlInstance sql2016 -Login mylogin -Confirm:$false\nDoes not prompt and swiftly removes mylogin on SQL Server sql2016\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaLogin -SqlInstance server\\instance -Login yourlogin | Remove-DbaLogin\nRemoves mylogin on SQL Server server\\instance",
        "Syntax":  "Remove-DbaLogin [-SqlCredential \u003cPSCredential\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nRemove-DbaLogin -SqlInstance \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] -Login \u003cString[]\u003e [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nRemove-DbaLogin [-SqlCredential \u003cPSCredential\u003e] -InputObject \u003cLogin[]\u003e [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Remove-DbaNetworkCertificate",
        "Description":  "Removes the network certificate for SQL Server instance. This setting is found in Configuration Manager.",
        "Tags":  "Certificate",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. Defaults to localhost. If target is a cluster, you must also specify InstanceClusterName (see below)",
                           "ServerInstance,SqlServer,ComputerName",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Allows you to login to the computer (not sql instance) using alternative credentials.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Removes the network certificate for SQL Server instance",
        "Name":  "Remove-DbaNetworkCertificate",
        "Links":  "https://dbatools.io/Remove-DbaNetworkCertificate",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRemove-DbaNetworkCertificate\nRemoves the Network Certificate for the default instance (MSSQLSERVER) on localhost\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eRemove-DbaNetworkCertificate -SqlInstance sql1\\SQL2008R2SP2\nRemoves the Network Certificate for the SQL2008R2SP2 instance on sql1\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eRemove-DbaNetworkCertificate -SqlInstance localhost\\SQL2008R2SP2 -WhatIf\nShows what would happen if the command were run",
        "Syntax":  "Remove-DbaNetworkCertificate [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Remove-DbaOrphanUser",
        "Description":  "An orphan user is defined by a user that does not have their matching login. (Login property = \"\").\n\nIf user is the owner of the schema with the same name and if if the schema does not have any underlying objects the schema will be dropped.\n\nIf user owns more than one schema, the owner of the schemas that does not have the same name as the user, will be changed to \u0027dbo\u0027. If schemas have underlying objects, you must specify the -Force parameter so the user can be dropped.\n\nIf exists a login to map the drop will not be performed unless you specify the -Force parameter (only when calling from Repair-DbaOrphanUser.",
        "Tags":  [
                     "Orphan",
                     "Database",
                     "Security",
                     "Login"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Specifies the database(s) to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "Specifies the database(s) to exclude from processing. Options for this list are auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "User",
                           "Specifies the list of users to remove.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Force",
                           "If this switch is enabled:\r\nIf exists any schema which owner is the User, this will force the change of the owner to \u0027dbo\u0027.\r\nIf exists a login to map the drop will not be performed unless you specify this parameter.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Remove-SqlOrphanUser",
        "Author":  "Claudio Silva (@ClaudioESSilva) | Simone Bizzotto (@niphlod)",
        "Synopsis":  "Drop orphan users with no existing login to map",
        "Name":  "Remove-DbaOrphanUser",
        "Links":  "https://dbatools.io/Remove-DbaOrphanUser",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRemove-DbaOrphanUser -SqlInstance sql2005\nFinds and drops all orphan users without matching Logins in all databases present on server \u0027sql2005\u0027.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eRemove-DbaOrphanUser -SqlInstance sqlserver2014a -SqlCredential $cred\nFinds and drops all orphan users without matching Logins in all databases present on server \u0027sqlserver2014a\u0027. SQL Server authentication will be used in connecting to the server.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eRemove-DbaOrphanUser -SqlInstance sqlserver2014a -Database db1, db2 -Force\nFinds and drops orphan users even if they have a matching Login on both db1 and db2 databases.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eRemove-DbaOrphanUser -SqlInstance sqlserver2014a -ExcludeDatabase db1, db2 -Force\nFinds and drops orphan users even if they have a matching Login from all databases except db1 and db2.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eRemove-DbaOrphanUser -SqlInstance sqlserver2014a -User OrphanUser\nRemoves user OrphanUser from all databases only if there is no matching login.\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eRemove-DbaOrphanUser -SqlInstance sqlserver2014a -User OrphanUser -Force\nRemoves user OrphanUser from all databases even if they have a matching Login. Any schema that the user owns will change ownership to dbo.",
        "Syntax":  "Remove-DbaOrphanUser [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [[-User] \u003cObject[]\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Remove-DbaPfDataCollectorCounter",
        "Description":  "Removes a Performance Data Collector Counter.",
        "Tags":  "PerfMon",
        "Params":  [
                       [
                           "ComputerName",
                           "The target computer. Defaults to localhost.",
                           "",
                           false,
                           "false",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Allows you to login to the target computer using alternative credentials. To use:\n$cred = Get-Credential, then pass $cred object to the -Credential parameter.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "CollectorSet",
                           "The name of the Collector Set to search.",
                           "DataCollectorSet",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Collector",
                           "The name of the Collector to remove.",
                           "DataCollector",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Counter",
                           "The name of the Counter - in the form of \u0027\\Processor(_Total)\\% Processor Time\u0027.",
                           "Name",
                           true,
                           "true (ByPropertyName)",
                           ""
                       ],
                       [
                           "InputObject",
                           "Accepts the object output by Get-DbaPfDataCollectorSet via the pipeline.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Removes a Performance Data Collector Counter.",
        "Name":  "Remove-DbaPfDataCollectorCounter",
        "Links":  "https://dbatools.io/Remove-DbaPfDataCollectorCounter",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRemove-DbaPfDataCollectorCounter -ComputerName sql2017 -CollectorSet \u0027System Correlation\u0027 -Collector DataCollector01  -Counter \u0027\\LogicalDisk(*)\\Avg. Disk Queue Length\u0027\nPrompts for confirmation then removes the \u0027\\LogicalDisk(*)\\Avg. Disk Queue Length\u0027 counter within the DataCollector01 collector within the System Correlation collector set on sql2017.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaPfDataCollectorCounter | Out-GridView -PassThru | Remove-DbaPfDataCollectorCounter -Confirm:$false\nAllows you to select which counters you\u0027d like on localhost and does not prompt for confirmation.",
        "Syntax":  "Remove-DbaPfDataCollectorCounter [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [[-CollectorSet] \u003cString[]\u003e] [[-Collector] \u003cString[]\u003e] [-Counter] \u003cObject[]\u003e [[-InputObject] \u003cObject[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Remove-DbaPfDataCollectorSet",
        "Description":  "Removes a Performance Monitor Data Collector Set. When removing data collector sets from the local instance, Run As Admin is required.",
        "Tags":  "PerfMon",
        "Params":  [
                       [
                           "ComputerName",
                           "The target computer. Defaults to localhost.",
                           "",
                           false,
                           "false",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Allows you to login to the target computer using alternative credentials. To use:\n$cred = Get-Credential, then pass $cred object to the -Credential parameter.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "CollectorSet",
                           "The name of the Collector Set to remove.",
                           "DataCollectorSet",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Accepts the object output by Get-DbaPfDataCollectorSet via the pipeline.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Removes a Performance Monitor Data Collector Set",
        "Name":  "Remove-DbaPfDataCollectorSet",
        "Links":  "https://dbatools.io/Remove-DbaPfDataCollectorSet",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRemove-DbaPfDataCollectorSet\nPrompts for confirmation then removes all ready Collectors on localhost.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eRemove-DbaPfDataCollectorSet -ComputerName sql2017 -Confirm:$false\nAttempts to remove all ready Collectors on localhost and does not prompt to confirm.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eRemove-DbaPfDataCollectorSet -ComputerName sql2017, sql2016 -Credential ad\\sqldba -CollectorSet \u0027System Correlation\u0027\nPrompts for confirmation then removes the \u0027System Correlation\u0027 Collector on sql2017 and sql2016 using alternative credentials.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaPfDataCollectorSet -CollectorSet \u0027System Correlation\u0027 | Remove-DbaPfDataCollectorSet\nRemoves the \u0027System Correlation\u0027 Collector.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eGet-DbaPfDataCollectorSet -CollectorSet \u0027System Correlation\u0027 | Stop-DbaPfDataCollectorSet | Remove-DbaPfDataCollectorSet\nStops and removes the \u0027System Correlation\u0027 Collector.",
        "Syntax":  "Remove-DbaPfDataCollectorSet [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [[-CollectorSet] \u003cString[]\u003e] [[-InputObject] \u003cObject[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Remove-DbaSpn",
        "Description":  "This function will connect to Active Directory and search for an account. If the account is found, it will attempt to remove the specified SPN. Once the SPN is removed, the function will also remove delegation to that service.\n\nIn order to run this function, the credential you provide must have write access to Active Directory.",
        "Tags":  "SPN",
        "Params":  [
                       [
                           "SPN",
                           "The SPN you want to remove",
                           "RequiredSPN",
                           true,
                           "true (ByPropertyName)",
                           ""
                       ],
                       [
                           "ServiceAccount",
                           "The account you want the SPN remove from",
                           "InstanceServiceAccount,AccountName",
                           true,
                           "true (ByPropertyName)",
                           ""
                       ],
                       [
                           "Credential",
                           "The credential you want to use to connect to Active Directory to make the changes",
                           "",
                           false,
                           "true (ByPropertyName)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command was executed",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Turns confirmations before changes on or off",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Drew Furgiuele (@pittfurg), http://www.port1433.com",
        "Synopsis":  "Removes an SPN for a given service account in active directory and also removes delegation to the same SPN, if found",
        "Name":  "Remove-DbaSpn",
        "Links":  "https://dbatools.io/Remove-DbaSpn",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRemove-DbaSpn -SPN MSSQLSvc\\SQLSERVERA.domain.something -ServiceAccount domain\\account\nConnects to Active Directory and removes a provided SPN from the given account (and also the relative delegation)\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eRemove-DbaSpn -SPN MSSQLSvc\\SQLSERVERA.domain.something -ServiceAccount domain\\account -EnableException\nConnects to Active Directory and removes a provided SPN from the given account, suppressing all error messages and throw exceptions that can be caught instead\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eRemove-DbaSpn -SPN MSSQLSvc\\SQLSERVERA.domain.something -ServiceAccount domain\\account -Credential ad\\sqldba\nConnects to Active Directory and removes a provided SPN to the given account. Uses alternative account to connect to AD.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eTest-DbaSpn -ComputerName sql2005 | Where { $_.isSet -eq $true } | Remove-DbaSpn -WhatIf\nShows what would happen trying to remove all set SPNs for sql2005 and the relative delegations\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eTest-DbaSpn -ComputerName sql2005 | Where { $_.isSet -eq $true } | Remove-DbaSpn\nRemoves all set SPNs for sql2005 and the relative delegations",
        "Syntax":  "Remove-DbaSpn [-SPN] \u003cString\u003e [-ServiceAccount] \u003cString\u003e [[-Credential] \u003cPSCredential\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Remove-DbaTrace",
        "Description":  "Stops and closes the specified trace and deletes its definition from the server.",
        "Tags":  [
                     "Security",
                     "Trace"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Id",
                           "A list of trace ids.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Internal parameter for piping.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Stops and closes the specified trace and deletes its definition from the server.",
        "Name":  "Remove-DbaTrace",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRemove-DbaTrace -SqlInstance sql2008\nStops and removes all traces on sql2008\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eRemove-DbaTrace -SqlInstance sql2008 -Id 1\nStops and removes all trace with ID 1 on sql2008\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaTrace -SqlInstance sql2008 | Out-GridView -PassThru | Remove-DbaTrace\nStops and removes selected traces on sql2008",
        "Syntax":  "Remove-DbaTrace [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Id] \u003cInt32[]\u003e] [[-InputObject] \u003cObject[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Remove-DbaXESession",
        "Description":  "This script removes Extended Events sessions on a SQL Server instance.",
        "Tags":  [
                     "ExtendedEvent",
                     "XE",
                     "XEvent"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2008 or higher.",
                           "ServerInstance,SqlServer",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Session",
                           "Specifies a list of Extended Events sessions to remove.",
                           "Sessions",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "AllSessions",
                           "If this switch is enabled, all Extended Events sessions will be removed except the packaged sessions AlwaysOn_health, system_health, telemetry_xevents.",
                           "",
                           true,
                           "false",
                           "False"
                       ],
                       [
                           "InputObject",
                           "Accepts a collection of XEsession objects as output by Get-DbaXESession.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Removes Extended Events sessions.",
        "Name":  "Remove-DbaXESession",
        "Links":  "https://dbatools.io/Remove-DbaXESession",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRemove-DbaXESession -SqlInstance sql2012 -AllSessions\nRemoves all Extended Event Session on the sqlserver2014 instance.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eRemove-DbaXESession -SqlInstance sql2012 -Session xesession1,xesession2\nRemoves the xesession1 and xesession2 Extended Event sessions.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaXESession -SqlInstance sql2017 | Remove-DbaXESession -Confirm:$false\nRemoves all sessions from sql2017, bypassing prompts.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaXESession -SqlInstance sql2012 -Session xesession1 | Remove-DbaXESession\nRemoves the sessions returned from the Get-DbaXESession function.",
        "Syntax":  "Remove-DbaXESession [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] -Session \u003cObject[]\u003e [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nRemove-DbaXESession [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] -AllSessions [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nRemove-DbaXESession -InputObject \u003cSession[]\u003e [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Remove-DbaXESmartTarget",
        "Description":  "Removes XESmartTarget PowerShell jobs.",
        "Tags":  [
                     "ExtendedEvent",
                     "XE",
                     "XEvent"
                 ],
        "Params":  [
                       [
                           "InputObject",
                           "Specifies one or more XESmartTarget job objects as output by Get-DbaXESmartTarget.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl) | SmartTarget by Gianluca Sartori (@spaghettidba)",
        "Synopsis":  "Removes XESmartTarget PowerShell jobs.",
        "Name":  "Remove-DbaXESmartTarget",
        "Links":  "https://dbatools.io/Remove-DbaXESmartTarget",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaXESmartTarget | Remove-DbaXESmartTarget\nRemoves all XESmartTarget jobs.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaXESmartTarget | Where-Object Id -eq 2 | Remove-DbaXESmartTarget\nRemoves a specific XESmartTarget job.",
        "Syntax":  "Remove-DbaXESmartTarget [-InputObject] \u003cObject[]\u003e [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Rename-DbaDatabase",
        "Description":  "Can change every database metadata that can be renamed.\nThe ultimate goal is choosing to have a default template to enforce in your environment\nso your naming convention for every bit can be put in place in no time.\nThe process is as follows (it follows the hierarchy of the entities):\n- database name is changed (optionally, forcing users out)\n- filegroup name(s) are changed accordingly\n- logical name(s) are changed accordingly\n- physical file(s) are changed accordingly\n- if Move is specified, the database will be taken offline and the move will initiate, then it will be taken online\n- if Move is not specified, the database remains online (unless SetOffline), and you are in charge of moving files\nIf any of the above fails, the process stops.\nPlease take a backup of your databases BEFORE using this, and remember to backup AFTER (also a FULL backup of master)\n\nIt returns an object for each database with all the renames done, plus hidden properties showing a \"human\" representation of them.\n\nIt\u0027s better you store the resulting object in a variable so you can inspect it in case of issues, e.g. \"$result = Rename-DbaDatabase .....\"\n\nTo get a grasp without worrying of what would happen under the hood, use \"Rename-DbaDatabase .... -Preview | Select-Object *\"",
        "Tags":  [
                     "Database",
                     "Rename"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "Target any number of instances, in order to return their build state.",
                           "ServerInstance,SqlServer",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "When connecting to an instance, use the credentials specified.",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Targets only specified databases",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "Excludes only specified databases",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AllDatabases",
                           "If you want to apply the naming convention system wide, you need to pass this parameter",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "DatabaseName",
                           "Pass a template to rename the database name. Valid placeholders are:\r\n- \u003cDBN\u003e current database name\r\n- \u003cDATE\u003e date (yyyyMMdd)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "FileGroupName",
                           "Pass a template to rename file group name. Valid placeholders are:\r\n- \u003cFGN\u003e current filegroup name\r\n- \u003cDBN\u003e current database name\r\n- \u003cDATE\u003e date (yyyyMMdd)\r\nIf distinct names cannot be generated, a counter will be appended (0001, 0002, 0003, etc)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "LogicalName",
                           "Pass a template to rename logical name. Valid placeholders are:\r\n- \u003cFT\u003e file type (ROWS, LOG)\r\n- \u003cLGN\u003e current logical name\r\n- \u003cFGN\u003e current filegroup name\r\n- \u003cDBN\u003e current database name\r\n- \u003cDATE\u003e date (yyyyMMdd)\r\nIf distinct names cannot be generated, a counter will be appended (0001, 0002, 0003, etc)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "FileName",
                           "Pass a template to rename file name. Valid placeholders are:\r\n- \u003cFNN\u003e current file name (the basename, without directory nor extension)\r\n- \u003cFT\u003e file type (ROWS, LOG, MMO, FS)\r\n- \u003cLGN\u003e current logical name\r\n- \u003cFGN\u003e current filegroup name\r\n- \u003cDBN\u003e current database name\r\n- \u003cDATE\u003e date (yyyyMMdd)\r\nIf distinct names cannot be generated, a counter will be appended (0001, 0002, 0003, etc)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ReplaceBefore",
                           "If you pass this switch, all upper level \"current names\" will be inspected and replaced BEFORE doing the\r\nrename according to the template in the current level (remember the hierarchy):\r\nLet\u0027s say you have a database named \"dbatools_HR\", composed by 3 files\r\n- dbatools_HR_Data.mdf\r\n- dbatools_HR_Index.ndf\r\n- dbatools_HR_log.ldf\r\nRename-DbaDatabase .... -Database \"dbatools_HR\" -DatabaseName \"dbatools_HRARCHIVE\" -FileName \u0027\u003cDBN\u003e\u003cFNN\u003e\u0027\r\nwould end up with this logic:\r\n- database --\u003e no placeholders specified\r\n- dbatools_HR to dbatools_HRARCHIVE\r\n- filenames placeholders specified\r\n\u003cDBN\u003e\u003cFNN\u003e --\u003e current database name + current filename\"\r\n- dbatools_HR_Data.mdf to dbatools_HRARCHIVEdbatools_HR_Data.mdf\r\n- dbatools_HR_Index.mdf to dbatools_HRARCHIVEdbatools_HR_Data.mdf\r\n- dbatools_HR_log.ldf to dbatools_HRARCHIVEdbatools_HR_log.ldf\r\nPassing this switch, instead, e.g.\r\nRename-DbaDatabase .... -Database \"dbatools_HR\" -DatabaseName \"dbatools_HRARCHIVE\" -FileName \u0027\u003cDBN\u003e\u003cFNN\u003e\u0027 -ReplaceBefore\r\nend up with this logic instead:\r\n- database --\u003e no placeholders specified\r\n- dbatools_HR to dbatools_HRARCHIVE\r\n- filenames placeholders specified,\r\n\u003cDBN\u003e\u003cFNN\u003e, plus -ReplaceBefore --\u003e current database name + replace OLD \"upper level\" names inside the current filename\r\n- dbatools_HR_Data.mdf to dbatools_HRARCHIVE_Data.mdf\r\n- dbatools_HR_Index.mdf to dbatools_HRARCHIVE_Data.mdf\r\n- dbatools_HR_log.ldf to dbatools_HRARCHIVE_log.ldf",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Force",
                           "Kills any open session to be able to do renames.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Move",
                           "If you want this function to move files, else you\u0027re the one in charge of it.\r\nThis enables the same functionality as SetOffline, killing open transactions and putting the database\r\noffline, then do the actual rename and setting it online again afterwards",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "SetOffline",
                           "Kills any open session and sets the database offline to be able to move files",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Preview",
                           "Shows the renames without performing any operation (recommended to find your way around this function parameters ;-) )",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "InputObject",
                           "Accepts piped database objects",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Simone Bizzotto (@niphold)",
        "Synopsis":  "Changes database name, logical file names, file group names and physical file names (optionally handling the move). BETA VERSION.",
        "Name":  "Rename-DbaDatabase",
        "Links":  "https://dbatools.io/Rename-DbaDatabase",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRename-DbaDatabase -SqlInstance sqlserver2014a -Database HR -DatabaseName HR2 -Preview | select *\nShows the detailed result set you\u0027ll get renaming the HR database to HR2 without doing anything\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eRename-DbaDatabase -SqlInstance sqlserver2014a -Database HR -DatabaseName HR2\nRenames the HR database to HR2\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaDatabase -SqlInstance sqlserver2014a -Database HR | Rename-DbaDatabase -DatabaseName HR2\nSame as before, but with a piped database (renames the HR database to HR2)\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eRename-DbaDatabase -SqlInstance sqlserver2014a -Database HR -DatabaseName \"dbatools_\u003cDBN\u003e\"\nRenames the HR database to dbatools_HR\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eRename-DbaDatabase -SqlInstance sqlserver2014a -Database HR -DatabaseName \"dbatools_\u003cDBN\u003e_\u003cDATE\u003e\"\nRenames the HR database to dbatools_HR_20170807 (if today is 07th Aug 2017)\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eRename-DbaDatabase -SqlInstance sqlserver2014a -Database HR -FileGroupName \"dbatools_\u003cFGN\u003e\"\nRenames every FileGroup within HR to \"dbatools_[the original FileGroup name]\"\n-------------------------- EXAMPLE 7 --------------------------\nPS C:\\\u003eRename-DbaDatabase -SqlInstance sqlserver2014a -Database HR -DatabaseName \"dbatools_\u003cDBN\u003e\" -FileGroupName \"\u003cDBN\u003e_\u003cFGN\u003e\"\nRenames the HR database to \"dbatools_HR\", then renames every FileGroup within to \"dbatools_HR_[the original FileGroup name]\"\n-------------------------- EXAMPLE 8 --------------------------\nPS C:\\\u003eRename-DbaDatabase -SqlInstance sqlserver2014a -Database HR -FileGroupName \"dbatools_\u003cDBN\u003e_\u003cFGN\u003e\"\nPS C:\\\u003e Rename-DbaDatabase -SqlInstance sqlserver2014a -Database HR -DatabaseName \"dbatools_\u003cDBN\u003e\"\nRenames the HR database to \"dbatools_HR\", then renames every FileGroup within to \"dbatools_HR_[the original FileGroup name]\"\n-------------------------- EXAMPLE 9 --------------------------\nPS C:\\\u003eRename-DbaDatabase -SqlInstance sqlserver2014a -Database HR -DatabaseName \"dbatools_\u003cDBN\u003e\" -FileName \"\u003cDBN\u003e_\u003cFGN\u003e_\u003cFNN\u003e\"\nRenames the HR database to \"dbatools_HR\" and then all filenames as \"dbatools_HR_[Name of the FileGroup]_[original_filename]\"\r\nThe db stays online (watch out!). You can then proceed manually to move/copy files by hand, set the db offline and then online again to finish the rename process\n-------------------------- EXAMPLE 10 --------------------------\nPS C:\\\u003eRename-DbaDatabase -SqlInstance sqlserver2014a -Database HR -DatabaseName \"dbatools_\u003cDBN\u003e\" -FileName \"\u003cDBN\u003e_\u003cFGN\u003e_\u003cFNN\u003e\" -SetOffline\nRenames the HR database to \"dbatools_HR\" and then all filenames as \"dbatools_HR_[Name of the FileGroup]_[original_filename]\"\r\nThe db is then set offline (watch out!). You can then proceed manually to move/copy files by hand and then set it online again to finish the rename process\n-------------------------- EXAMPLE 11 --------------------------\nPS C:\\\u003eRename-DbaDatabase -SqlInstance sqlserver2014a -Database HR -DatabaseName \"dbatools_\u003cDBN\u003e\" -FileName \"\u003cDBN\u003e_\u003cFGN\u003e_\u003cFNN\u003e\" -Move\nRenames the HR database to \"dbatools_HR\" and then all filenames as \"dbatools_HR_[Name of the FileGroup]_[original_filename]\"\r\nThe db is then set offline (watch out!). The function tries to do a simple rename and then sets the db online again to finish the rename process",
        "Syntax":  "Rename-DbaDatabase -SqlInstance \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Database \u003cObject[]\u003e] [-ExcludeDatabase \u003cObject[]\u003e] [-AllDatabases] [-DatabaseName \u003cString\u003e] [-FileGroupName \u003cString\u003e] [-LogicalName \u003cString\u003e] [-FileName \u003cString\u003e] [-ReplaceBefore] [-Force] [-Move] [-SetOffline] [-Preview] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nRename-DbaDatabase [-SqlCredential \u003cPSCredential\u003e] [-ExcludeDatabase \u003cObject[]\u003e] [-AllDatabases] [-DatabaseName \u003cString\u003e] [-FileGroupName \u003cString\u003e] [-LogicalName \u003cString\u003e] [-FileName \u003cString\u003e] [-ReplaceBefore] [-Force] [-Move] [-SetOffline] [-Preview] -InputObject \u003cDatabase[]\u003e [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Rename-DbaLogin",
        "Description":  "There are times where you might want to rename a login that was copied down, or if the name is not descriptive for what it does.\n\nIt can be a pain to update all of the mappings for a specific user, this does it for you.",
        "Tags":  "Login",
        "Params":  [
                       [
                           "SqlInstance",
                           "Source SQL Server.You must have sysadmin access and server version must be SQL Server version 2000 or greater.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Login",
                           "The current Login on the server - this list is auto-populated from the server.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "NewLogin",
                           "The new Login that you wish to use. If it is a windows user login, then the SID must match.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts to confirm actions",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Mitchell Hamann (@SirCaptainMitch)",
        "Synopsis":  "Rename-DbaLogin will rename login and database mapping for a specified login.",
        "Name":  "Rename-DbaLogin",
        "Links":  "https://dbatools.io/Rename-DbaLogin",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRename-DbaLogin -SqlInstance localhost -Login DbaToolsUser -NewLogin captain\nSQL Login Example\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eRename-DbaLogin -SqlInstance localhost -Login domain\\oldname -NewLogin domain\\newname\nChange the windowsuser login name.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eRename-DbaLogin -SqlInstance localhost -Login dbatoolsuser -NewLogin captain -WhatIf\nWhatIf Example",
        "Syntax":  "Rename-DbaLogin [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-Login] \u003cString\u003e [-NewLogin] \u003cString\u003e [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Repair-DbaDbMirror",
        "Description":  "Attempts to repair a suspended mirroring database.\n\nRestarts the endpoints then sets the partner to resume. See this article for more info:\n\nhttp://www.sqlservercentral.com/blogs/vivekssqlnotes/2016/09/03/how-to-resume-suspended-database-mirroring-in-sql-server-/",
        "Tags":  [
                     "Mirror",
                     "HA"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function\r\nto be executed against multiple SQL Server instances.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The target database.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Allows piping from Get-DbaDatabase.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Attempts to repair a suspended or paused mirroring database.",
        "Name":  "Repair-DbaDbMirror",
        "Links":  "https://dbatools.io/Repair-DbaDbMirror",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRepair-DbaDbMirror -SqlInstance sql2017 -Database pubs\nAttempts to repair the mirrored but suspended pubs database on sql2017.\r\nRestarts the endpoints then sets the partner to resume. Prompts for confirmation.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDatabase -SqlInstance sql2017 -Database pubs | Repair-DbaDbMirror -Confirm:$false\nAttempts to repair the mirrored but suspended pubs database on sql2017.\r\nRestarts the endpoints then sets the partner to resume. Does not prompt for confirmation.",
        "Syntax":  "Repair-DbaDbMirror [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cString[]\u003e] [[-InputObject] \u003cDatabase[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Repair-DbaOrphanUser",
        "Description":  "An orphan user is defined by a user that does not have a matching login (Login property = \"\").\n\nIf the matching login exists it must be:\nEnabled\nNot a system object\nNot locked\nHave the same name that user\n\nYou can drop users that does not have their matching login by specifying the parameter -RemoveNotExisting.",
        "Tags":  "Orphan",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Specifies the database(s) to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "Specifies the database(s) to exclude from processing. Options for this list are auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Users",
                           "Specifies the list of usernames to repair.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "RemoveNotExisting",
                           "If this switch is enabled, all users that do not have a matching login will be dropped from the database.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Force",
                           "Forces alter schema to dbo owner so users can be dropped.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Repair-SqlOrphanUser",
        "Author":  "Claudio Silva (@ClaudioESSilva) | Simone Bizzotto (@niphlod)",
        "Synopsis":  "Finds orphan users with existing login and remaps them.",
        "Name":  "Repair-DbaOrphanUser",
        "Links":  "https://dbatools.io/Repair-DbaOrphanUser",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRepair-DbaOrphanUser -SqlInstance sql2005\nFinds and repairs all orphan users of all databases present on server \u0027sql2005\u0027\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eRepair-DbaOrphanUser -SqlInstance sqlserver2014a -SqlCredential $cred\nFinds and repair all orphan users in all databases present on server \u0027sqlserver2014a\u0027. SQL credentials are used to authenticate to the server.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eRepair-DbaOrphanUser -SqlInstance sqlserver2014a -Database db1, db2\nFinds and repairs all orphan users in both db1 and db2 databases.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eRepair-DbaOrphanUser -SqlInstance sqlserver2014a -Database db1 -Users OrphanUser\nFinds and repairs user \u0027OrphanUser\u0027 in \u0027db1\u0027 database.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eRepair-DbaOrphanUser -SqlInstance sqlserver2014a -Users OrphanUser\nFinds and repairs user \u0027OrphanUser\u0027 on all databases\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eRepair-DbaOrphanUser -SqlInstance sqlserver2014a -RemoveNotExisting\nFinds all orphan users of all databases present on server \u0027sqlserver2014a\u0027. Removes all users that do not have  matching Logins.",
        "Syntax":  "Repair-DbaOrphanUser [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [[-Users] \u003cObject[]\u003e] [-RemoveNotExisting] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Repair-DbaServerName",
        "Description":  "When a SQL Server\u0027s host OS is renamed, the SQL Server should be as well. This helps with Availability Groups and Kerberos.\n\nThis command renames @@SERVERNAME to match with the Windows name. The new name is automatically determined. It does not matter if you use an alias to connect to the SQL instance.\n\nIf the automatically determined new name matches the old name, the command will not run.\n\nhttps://www.mssqltips.com/sqlservertip/2525/steps-to-change-the-server-name-for-a-sql-server-machine/",
        "Tags":  "SPN",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AutoFix",
                           "If this switch is enabled, the repair will be performed automatically.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Force",
                           "If this switch is enabled, most confirmation prompts will be skipped.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Renames @@SERVERNAME to match with the Windows name.",
        "Name":  "Repair-DbaServerName",
        "Links":  "https://dbatools.io/Repair-DbaServerName",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRepair-DbaServerName -SqlInstance sql2014\nChecks to see if the server name is updatable and changes the name with a number of prompts.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eRepair-DbaServerName -SqlInstance sql2014 -AutoFix\nChecks to see if the server name is updatable and automatically performs the change. Replication or mirroring will be broken if necessary.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eRepair-DbaServerName -SqlInstance sql2014 -AutoFix -Force\nChecks to see if the server name is updatable and automatically performs the change, bypassing most prompts and confirmations. Replication or mirroring will be broken if necessary.",
        "Syntax":  "Repair-DbaServerName [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-AutoFix] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Reset-DbaAdmin",
        "Description":  "This function allows administrators to regain access to local or remote SQL Servers by either resetting the sa password, adding the sysadmin role to existing login, or adding a new login (SQL or Windows) and granting it sysadmin privileges.\n\nThis is accomplished by stopping the SQL services or SQL Clustered Resource Group, then restarting SQL via the command-line using the /mReset-DbaAdmin parameter which starts the server in Single-User mode and only allows this script to connect.\n\nOnce the service is restarted, the following tasks are performed:\n- Login is added if it doesn\u0027t exist\n- If login is a Windows User, an attempt is made to ensure it exists\n- If login is a SQL Login, password policy will be set to OFF when creating the login, and SQL Server authentication will be set to Mixed Mode.\n- Login will be enabled and unlocked\n- Login will be added to sysadmin role\n\nIf failures occur at any point, a best attempt is made to restart the SQL Server.\n\nIn order to make this script as portable as possible, System.Data.SqlClient and Get-WmiObject are used (as opposed to requiring the Failover Cluster Admin tools or SMO).\n\nIf using this function against a remote SQL Server, ensure WinRM is configured and accessible. If this is not possible, run the script locally.\n\nTested on Windows XP, 7, 8.1, Server 2012 and Windows Server Technical Preview 2.\nTested on SQL Server 2005 SP4 through 2016 CTP2.",
        "Tags":  "WSMan",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. SQL Server must be 2005 and above, and can be a clustered or stand-alone instance.",
                           "ServerInstance,SqlServer",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Instead of using Login and SecurePassword, you can just pass in a credential object.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Login",
                           "By default, the Login parameter is \"sa\" but any other SQL or Windows account can be specified. If a login does not currently exist, it will be added.\nWhen adding a Windows login to remote servers, ensure the SQL Server can add the login (ie, don\u0027t add WORKSTATION\\Admin to remoteserver\\instance. Domain users and Groups are valid input.",
                           "",
                           false,
                           "false",
                           "sa"
                       ],
                       [
                           "SecurePassword",
                           "By default, if a SQL Login is detected, you will be prompted for a password. Use this to securely bypass the prompt.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Force",
                           "If this switch is enabled, the Login(s) will be dropped and recreated on Destination. Logins that own Agent jobs cannot be dropped at this time.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Reset-SqlAdmin",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "This function allows administrators to regain access to SQL Servers in the event that passwords or access was lost.\n\nSupports SQL Server 2005 and above. Windows administrator access is required.",
        "Name":  "Reset-DbaAdmin",
        "Links":  "https://dbatools.io/Reset-DbaAdmin",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eReset-DbaAdmin -SqlInstance sqlcluster -SqlCredential sqladmin\nPrompts for password, then resets the \"sqladmin\" account password on sqlcluster.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eReset-DbaAdmin -SqlInstance sqlserver\\sqlexpress -Login ad\\administrator -Confirm:$false\nAdds the domain account \"ad\\administrator\" as a sysadmin to the SQL instance.\nIf the account already exists, it will be added to the sysadmin role.\nDoes not prompt for a password since it is not a SQL login. Does not prompt for confirmation since -Confirm is set to $false.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eReset-DbaAdmin -SqlInstance sqlserver\\sqlexpress -Login sqladmin -Force\nSkips restart confirmation, prompts for password, then adds a SQL Login \"sqladmin\" with sysadmin privileges.\r\nIf the account already exists, it will be added to the sysadmin role and the password will be reset.",
        "Syntax":  "Reset-DbaAdmin [-SqlInstance] \u003cDbaInstanceParameter\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Login] \u003cString\u003e] [[-SecurePassword] \u003cSecureString\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Reset-DbatoolsConfig",
        "Description":  "This command can be used to revert a configuration item to the value it was initialized with.\nGenerally, this amounts to reverting it to its default value.\n\nIn order for a reset to be possible, two conditions must be met:\n- The setting must have been initialized.\n- The setting cannot have been enforced by policy.",
        "Params":  [
                       [
                           "ConfigurationItem",
                           "A configuration object as returned by Get-DbatoolsConfig.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "FullName",
                           "The full name of the setting to reset, offering the maximum of precision.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Module",
                           "The name of the module, from which configurations should be reset.\r\nUsed in conjunction with the -Name parameter to filter a specific set of items.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "Name",
                           "Used in conjunction with the -Module parameter to select which settings to reset using wildcard comparison.",
                           "",
                           false,
                           "false",
                           "*"
                       ],
                       [
                           "EnableException",
                           "This parameters disables user-friendly warnings and enables the throwing of exceptions.\r\nThis is less user friendly, but allows catching exceptions in calling scripts.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Synopsis":  "Reverts a configuration item to its default value.",
        "Name":  "Reset-DbatoolsConfig",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eReset-DbatoolsConfig -Module MyModule\nResets all configuration items of the MyModule to default.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbatoolsConfig | Reset-DbatoolsConfig\nResets ALL configuration items to default.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eReset-DbatoolsConfig -FullName MyModule.Group.Setting1\nResets the configuration item named \u0027MyModule.Group.Setting1\u0027.",
        "Syntax":  "Reset-DbatoolsConfig [-ConfigurationItem \u003cConfig[]\u003e] [-FullName \u003cString[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]\nReset-DbatoolsConfig -Module \u003cString\u003e [-Name \u003cString\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Resolve-DbaNetworkName",
        "Description":  "Retrieves the IPAddress, ComputerName from one computer.\nThe object can be used to take action against its name or IPAddress.\n\nFirst ICMP is used to test the connection, and get the connected IPAddress.\n\nMultiple protocols (e.g. WMI, CIM, etc) are attempted before giving up.\n\nImportant: Remember that FQDN doesn\u0027t always match \"ComputerName dot Domain\" as AD intends.\nThere are network setup (google \"disjoint domain\") where AD and DNS do not match.\n\"Full computer name\" (as reported by sysdm.cpl) is the only match between the two,\nand it matches the \"DNSHostName\"  property of the computer object stored in AD.\nThis means that the notation of FQDN that matches \"ComputerName dot Domain\" is incorrect\nin those scenarios.\nIn other words, the \"suffix\" of the FQDN CAN be different from the AD Domain.\n\nThis cmdlet has been providing good results since its inception but for lack of useful\nnames some doubts may arise.\nLet this clear the doubts:\n- InputName: whatever has been passed in\n- ComputerName: hostname only\n- IPAddress: IP Address\n- DNSHostName: hostname only, coming strictly from DNS (as reported from the calling computer)\n- DNSDomain: domain only, coming strictly from DNS (as reported from the calling computer)\n- Domain: domain only, coming strictly from AD (i.e. the domain the ComputerName is joined to)\n- DNSHostEntry: Fully name as returned by DNS [System.Net.Dns]::GetHostEntry\n- FQDN: \"legacy\" notation of ComputerName \"dot\" Domain (coming from AD)\n- FullComputerName: Full name as configured from within the Computer (i.e. the only secure match between AD and DNS)\n\nSo, if you need to use something, go with FullComputerName, always, as it is the most correct in every scenario.",
        "Tags":  [
                     "Network",
                     "Resolve"
                 ],
        "Params":  [
                       [
                           "ComputerName",
                           "The target SQL Server instance or instances.\r\nThis can be the name of a computer, a SMO object, an IP address or a SQL Instance.",
                           "cn,host,ServerInstance,Server,SqlInstance",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Credential object used to connect to the SQL Server as a different user",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Turbo",
                           "Resolves without accessing the server itself. Faster but may be less accurate because it relies on DNS only,\r\nso it may fail spectacularly for disjoin-domain setups. Also, everyone has its own DNS (i.e. results may vary\r\nchanging the computer where the function runs)",
                           "FastParrot",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Klaas Vandenberghe (@PowerDBAKlaas) | Simone Bizzotto (@niphold)",
        "Synopsis":  "Returns information about the network connection of the target computer including NetBIOS name, IP Address, domain name and fully qualified domain name (FQDN).",
        "Name":  "Resolve-DbaNetworkName",
        "Links":  "https://dbatools.io/Resolve-DbaNetworkName",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eResolve-DbaNetworkName -ComputerName ServerA\nReturns a custom object displaying InputName, ComputerName, IPAddress, DNSHostName, DNSDomain, Domain, DNSHostEntry, FQDN, DNSHostEntry for ServerA\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eResolve-DbaNetworkName -SqlInstance sql2016\\sqlexpress\nReturns a custom object displaying InputName, ComputerName, IPAddress, DNSHostName, DNSDomain, Domain, DNSHostEntry, FQDN, DNSHostEntry  for the SQL instance sql2016\\sqlexpress\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eResolve-DbaNetworkName -SqlInstance sql2016\\sqlexpress, sql2014\nReturns a custom object displaying InputName, ComputerName, IPAddress, DNSHostName, DNSDomain, Domain, DNSHostEntry, FQDN, DNSHostEntry  for the SQL instance sql2016\\sqlexpress and sql2014\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaCmsRegServer -SqlInstance sql2014 | Resolve-DbaNetworkName\nReturns a custom object displaying InputName, ComputerName, IPAddress, DNSHostName, Domain, FQDN for all SQL Servers returned by Get-DbaCmsRegServer",
        "Syntax":  "Resolve-DbaNetworkName [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [-Turbo] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Resolve-DbaPath",
        "Description":  "Resolves a path.\nWill try to resolve to paths including some basic path validation and resolution.\nWill fail if the path cannot be resolved (so an existing path must be reached at).",
        "Params":  [
                       [
                           "Path",
                           "The path to validate.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Provider",
                           "Ensure the path is of the expected provider.\r\nAllows ensuring one does not operate in the wrong provider.\r\nCommon providers include the filesystem, the registry or the active directory.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SingleItem",
                           "Ensure the path should resolve to a single path only.\r\nThis may - intentionally or not - trip up wildcard paths.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "NewChild",
                           "Assumes one wishes to create a new child item.\r\nThe parent path will be resolved and must validate true.\r\nThe final leaf will be treated as a leaf item that does not exist yet.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Synopsis":  "Resolves a path.",
        "Name":  "Resolve-DbaPath",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eResolve-DbaPath -Path report.log -Provider FileSystem -NewChild -SingleItem\nEnsures the resolved path is a FileSystem path.\r\nThis will resolve to the current folder and the file report.log.\r\nWill not ensure the file exists or doesn\u0027t exist.\r\nIf the current path is in a different provider, it will throw an exception.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eResolve-DbaPath -Path ..\\*\nThis will resolve all items in the parent folder, whatever the current path or drive might be.",
        "Syntax":  "Resolve-DbaPath [-Path] \u003cString[]\u003e [-Provider \u003cString\u003e] [-SingleItem] [-NewChild] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Restart-DbaService",
        "Description":  "Restarts the SQL Server related services on one or more computers. Will follow SQL Server service dependencies.\n\nRequires Local Admin rights on destination computer(s).",
        "Tags":  [
                     "Service",
                     "Instance",
                     "Restart"
                 ],
        "Params":  [
                       [
                           "ComputerName",
                           "The target SQL Server instance or instances.",
                           "cn,host,Server",
                           false,
                           "false",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "InstanceName",
                           "Only affects services that belong to the specific instances.",
                           "Instance",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Type",
                           "Use -Type to collect only services of the desired SqlServiceType.\r\nCan be one of the following: \"Agent\",\"Browser\",\"Engine\",\"FullText\",\"SSAS\",\"SSIS\",\"SSRS\"",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "A collection of services from Get-DbaService",
                           "ServiceCollection",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Timeout",
                           "How long to wait for the start/stop request completion before moving on. Specify 0 to wait indefinitely.",
                           "",
                           false,
                           "false",
                           "60"
                       ],
                       [
                           "Credential",
                           "Credential object used to connect to the computer as a different user.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Force",
                           "Will stop dependent SQL Server agents when stopping Engine services.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the cmdlet runs. The cmdlet is not run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before running the cmdlet.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Restart-DbaSqlService",
        "Author":  "Kirill Kravtsov (@nvarscar)",
        "Synopsis":  "Restarts SQL Server services on a computer.",
        "Name":  "Restart-DbaService",
        "Links":  "https://dbatools.io/Restart-DbaService",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRestart-DbaService -ComputerName sqlserver2014a\nRestarts the SQL Server related services on computer sqlserver2014a.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e\u0027sql1\u0027,\u0027sql2\u0027,\u0027sql3\u0027| Get-DbaService | Restart-DbaService\nGets the SQL Server related services on computers sql1, sql2 and sql3 and restarts them.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eRestart-DbaService -ComputerName sql1,sql2 -Instance MSSQLSERVER\nRestarts the SQL Server services related to the default instance MSSQLSERVER on computers sql1 and sql2.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eRestart-DbaService -ComputerName $MyServers -Type SSRS\nRestarts the SQL Server related services of type \"SSRS\" (Reporting Services) on computers in the variable MyServers.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eRestart-DbaService -ComputerName sql1 -Type Engine -Force\nRestarts SQL Server database engine services on sql1 forcing dependent SQL Server Agent services to restart as well.",
        "Syntax":  "Restart-DbaService [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [-InstanceName \u003cString[]\u003e] [-Type \u003cString[]\u003e] [-Timeout \u003cInt32\u003e] [-Credential \u003cPSCredential\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nRestart-DbaService [-InstanceName \u003cString[]\u003e] [-Type \u003cString[]\u003e] -InputObject \u003cObject[]\u003e [-Timeout \u003cInt32\u003e] [-Credential \u003cPSCredential\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Restore-DbaBackupFromDirectory",
        "Description":  "Please use `Get-ChildItem | Restore-DbaDatabase` instead. This command is no longer supported.",
        "Tags":  [
                     "DisasterRecovery",
                     "Backup",
                     "Restore"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The SQL Server instance to which you will be restoring the database.",
                           "ServerInstance,SqlServer",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "Path",
                           "Specifies the full path to the directory that contains the database backups. The SQL Server service must have read access to this path.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "NoRecovery",
                           "If this switch is enabled, the database is left in the No Recovery state to enable further backups to be added.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "ReuseSourceFolderStructure",
                           "If this switch is enabled, the folder structure used on the instance where the backup was made will be recreated. By default, the database files will be restored to the default data and log \r\ndirectories for the instance you\u0027re restoring onto.",
                           "ReuseFolderStructure",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Force",
                           "If this switch is enabled, any existing database matching the name of a database being restored will be overwritten.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Restore-SqlBackupFromDirectory",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Please use `Get-ChildItem | Restore-DbaDatabase` instead. This command is no longer supported.",
        "Name":  "Restore-DbaBackupFromDirectory",
        "Links":  "https://dbatools.io/Restore-SqlBackupFromDirectory",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRestore-SqlBackupFromDirectory -SqlInstance sqlcluster -Path \\\\fileserver\\share\\sqlbackups\\SQLSERVER2014A\nAll user databases contained within \\\\fileserver\\share\\sqlbackups\\SQLSERVERA will be restored to sqlcluster, down the most recent full/differential/logs.\nRequires -Version 3.0",
        "Syntax":  "Restore-DbaBackupFromDirectory [-SqlInstance] \u003cDbaInstanceParameter\u003e [-Path] \u003cString\u003e [-NoRecovery] [-ReuseSourceFolderStructure] [[-SqlCredential] \u003cPSCredential\u003e] [-Force] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Restore-DbaDatabase",
        "Description":  "Upon being passed a list of potential backups files this command will scan the files, select those that contain SQL Server\nbackup sets. It will then filter those files down to a set that can perform the requested restore, checking that we have a\nfull restore chain to the point in time requested by the caller.\n\nThe function defaults to working on a remote instance. This means that all paths passed in must be relative to the remote instance.\nXpDirTree will be used to perform the file scans\n\nVarious means can be used to pass in a list of files to be considered. The default is to non recursively scan the folder\npassed in.",
        "Tags":  [
                     "DisasterRecovery",
                     "Backup",
                     "Restore"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to login to servers using SQL Logins as opposed to Windows Auth/Integrated/Trusted.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Path",
                           "Path to SQL Server backup files.\nPaths passed in as strings will be scanned using the desired method, default is a non recursive folder scan\r\nAccepts multiple paths separated by \u0027,\u0027\nOr it can consist of FileInfo objects, such as the output of Get-ChildItem or Get-Item. This allows you to work with\r\nyour own file structures as needed",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "DatabaseName",
                           "Name to restore the database under.\r\nOnly works with a single database restore. If multiple database are found in the provided paths then we will exit",
                           "Name",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "DestinationDataDirectory",
                           "Path to restore the SQL Server backups to on the target instance.\r\nIf only this parameter is specified, then all database files (data and log) will be restored to this location",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "DestinationLogDirectory",
                           "Path to restore the database log files to.\r\nThis parameter can only be specified alongside DestinationDataDirectory.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "DestinationFileStreamDirectory",
                           "Path to restore FileStream data to\r\nThis parameter can only be specified alongside DestinationDataDirectory",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "RestoreTime",
                           "Specify a DateTime object to which you want the database restored to. Default is to the latest point  available in the specified backups",
                           "",
                           false,
                           "false",
                           "(Get-Date).AddYears(1)"
                       ],
                       [
                           "NoRecovery",
                           "Indicates if the databases should be recovered after last restore. Default is to recover",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WithReplace",
                           "Switch indicated is the restore is allowed to replace an existing database.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "XpDirTree",
                           "Switch that indicated file scanning should be performed by the SQL Server instance using xp_dirtree\r\nThis will scan recursively from the passed in path\r\nYou must have sysadmin role membership on the instance for this to work.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "OutputScriptOnly",
                           "Switch indicates that ONLY T-SQL scripts should be generated, no restore takes place",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "VerifyOnly",
                           "Switch indicate that restore should be verified",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "MaintenanceSolutionBackup",
                           "Switch to indicate the backup files are in a folder structure as created by Ola Hallengreen\u0027s maintenance scripts.\r\nThis switch enables a faster check for suitable backups. Other options require all files to be read first to ensure we have an anchoring full backup. Because we can rely on specific locations for \r\nbackups performed with OlaHallengren\u0027s backup solution, we can rely on file locations.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "FileMapping",
                           "A hashtable that can be used to move specific files to a location.\r\n`$FileMapping = @{\u0027DataFile1\u0027=\u0027c:\\restoredfiles\\Datafile1.mdf\u0027;\u0027DataFile3\u0027=\u0027d:\\DataFile3.mdf\u0027}`\r\nAnd files not specified in the mapping will be restored to their original location\r\nThis Parameter is exclusive with DestinationDataDirectory",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "IgnoreLogBackup",
                           "This switch tells the function to ignore transaction log backups. The process will restore to the latest full or differential backup point only",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "UseDestinationDefaultDirectories",
                           "Switch that tells the restore to use the default Data and Log locations on the target server. If they don\u0027t exist, the function will try to create them",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "ReuseSourceFolderStructure",
                           "By default, databases will be migrated to the destination Sql Server\u0027s default data and log directories. You can override this by specifying -ReuseSourceFolderStructure.\r\nThe same structure on the SOURCE will be kept exactly, so consider this if you\u0027re migrating between different versions and use part of Microsoft\u0027s default Sql structure (MSSql12.INSTANCE, etc)\n*Note, to reuse destination folder structure, specify -WithReplace",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "DestinationFilePrefix",
                           "This value will be prefixed to ALL restored files (log and data). This is just a simple string prefix. If you want to perform more complex rename operations then please use the FileMapping parameter\nThis will apply to all file move options, except for FileMapping",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "RestoredDatabaseNamePrefix",
                           "A string which will be prefixed to the start of the restore Database\u0027s Name\r\nUseful if restoring a copy to the same sql server for testing.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "TrustDbBackupHistory",
                           "This switch can be used when piping the output of Get-DbaBackupHistory or Backup-DbaDatabase into this command.\r\nIt allows the user to say that they trust that the output from those commands is correct, and skips the file header read portion of the process. This means a faster process, but at the risk of not \r\nknowing till halfway through the restore that something is wrong with a file.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "MaxTransferSize",
                           "Parameter to set the unit of transfer. Values must be a multiple by 64kb",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "BlockSize",
                           "Specifies the block size to use. Must be one of 0.5kb,1kb,2kb,4kb,8kb,16kb,32kb or 64kb\r\nCan be specified in bytes\r\nRefer to https://msdn.microsoft.com/en-us/library/ms178615.aspx for more detail",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "BufferCount",
                           "Number of I/O buffers to use to perform the operation.\r\nRefer to https://msdn.microsoft.com/en-us/library/ms178615.aspx for more detail",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "DirectoryRecurse",
                           "If specified the specified directory will be recursed into",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "StandbyDirectory",
                           "If a directory is specified the database(s) will be restored into a standby state, with the standby file placed into this directory (which must exist, and be writable by the target Sql Server \r\ninstance)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Continue",
                           "If specified we will to attempt to recover more transaction log backups onto  database(s) in Recovering or Standby states",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "AzureCredential",
                           "The name of the SQL Server credential to be used if restoring from an Azure hosted backup using Storage Access Keys\r\nIf a backup path beginning http is passed in and this parameter is not specified then if a credential with a name matching the URL",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ReplaceDbNameInFile",
                           "If switch set and occurrence of the original database\u0027s name in a data or log file will be replace with the name specified in the DatabaseName parameter",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "DestinationFileSuffix",
                           "This value will be suffixed to ALL restored files (log and data). This is just a simple string suffix. If you want to perform more complex rename operations then please use the FileMapping parameter\nThis will apply to all file move options, except for FileMapping",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Recover",
                           "If set will perform recovery on the indicated database",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "KeepCDC",
                           "Indicates whether CDC information should be restored as part of the database",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "AllowContinue",
                           "By default, Restore-DbaDatabase will stop restoring any databases if it comes across an error.\r\nUse this switch to enable it to restore all databases without issues.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "GetBackupInformation",
                           "Passing a string value into this parameter will cause a global variable to be created holding the output of Get-DbaBackupInformation",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "StopAfterGetBackupInformation",
                           "Switch which will cause the function to exit after returning GetBackupInformation",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "SelectBackupInformation",
                           "Passing a string value into this parameter will cause a global variable to be created holding the output of Select-DbaBackupInformation",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "StopAfterSelectBackupInformation",
                           "Switch which will cause the function to exit after returning SelectBackupInformation",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "FormatBackupInformation",
                           "Passing a string value into this parameter will cause a global variable to be created holding the output of Format-DbaBackupInformation",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "StopAfterFormatBackupInformation",
                           "Switch which will cause the function to exit after returning FormatBackupInformation",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "TestBackupInformation",
                           "Passing a string value into this parameter will cause a global variable to be created holding the output of Test-DbaBackupInformation",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "StopAfterTestBackupInformation",
                           "Switch which will cause the function to exit after returning TestBackupInformation",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "PageRestore",
                           "Passes in an object from Get-DbaSuspectPages containing suspect pages from a single database.\r\nSetting this Parameter will cause an Online Page restore if the target Instance is Enterprise Edition, or offline if not.\r\nThis will involve taking a tail log backup, so you must check your restore chain once it has completed",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "PageRestoreTailFolder",
                           "This parameter passes in a location for the tail log backup required for page level restore",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "StatementTimeout",
                           "Timeout in minutes. Defaults to infinity (restores can take a while.)",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command would execute, but does not actually perform the command",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts to confirm certain actions",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Stuart Moore (@napalmgram), stuart-moore.com",
        "Synopsis":  "Restores a SQL Server Database from a set of backup files",
        "Name":  "Restore-DbaDatabase",
        "Links":  "https://dbatools.io/Restore-DbaDatabase",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRestore-DbaDatabase -SqlInstance server1\\instance1 -Path \\\\server2\\backups\nScans all the backup files in \\\\server2\\backups, filters them and restores the database to server1\\instance1\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eRestore-DbaDatabase -SqlInstance server1\\instance1 -Path \\\\server2\\backups -MaintenanceSolutionBackup -DestinationDataDirectory c:\\restores\nScans all the backup files in \\\\server2\\backups$ stored in an Ola Hallengren style folder structure,\r\nfilters them and restores the database to the c:\\restores folder on server1\\instance1\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-ChildItem c:\\SQLbackups1\\, \\\\server\\sqlbackups2 | Restore-DbaDatabase -SqlInstance server1\\instance1\nTakes the provided files from multiple directories and restores them on  server1\\instance1\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003e$RestoreTime = Get-Date(\u002711:19 23/12/2016\u0027)\nPS C:\\\u003e Restore-DbaDatabase -SqlInstance server1\\instance1 -Path \\\\server2\\backups -MaintenanceSolutionBackup -DestinationDataDirectory c:\\restores -RestoreTime $RestoreTime\nScans all the backup files in \\\\server2\\backups stored in an Ola Hallengren style folder structure,\r\nfilters them and restores the database to the c:\\restores folder on server1\\instance1 up to 11:19 23/12/2016\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003e$result = Restore-DbaDatabase -SqlInstance server1\\instance1 -Path \\\\server2\\backups -DestinationDataDirectory c:\\restores -OutputScriptOnly\nPS C:\\\u003e $result | Select-Object -ExpandProperty Tsql | Out-File -Filepath c:\\scripts\\restore.sql\nScans all the backup files in \\\\server2\\backups stored in an Ola Hallengren style folder structure,\r\nfilters them and generate the T-SQL Scripts to restore the database to the latest point in time,\r\nand then stores the output in a file for later retrieval\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eRestore-DbaDatabase -SqlInstance server1\\instance1 -Path c:\\backups -DestinationDataDirectory c:\\DataFiles -DestinationLogDirectory c:\\LogFile\nScans all the files in c:\\backups and then restores them onto the SQL Server Instance server1\\instance1, placing data files\r\nc:\\DataFiles and all the log files into c:\\LogFiles\n-------------------------- EXAMPLE 7 --------------------------\nPS C:\\\u003eRestore-DbaDatabase -SqlInstance server1\\instance1 -Path http://demo.blob.core.windows.net/backups/dbbackup.bak -AzureCredential MyAzureCredential\nWill restore the backup held at  http://demo.blob.core.windows.net/backups/dbbackup.bak to server1\\instance1. The connection to Azure will be made using the\r\ncredential MyAzureCredential held on instance Server1\\instance1\n-------------------------- EXAMPLE 8 --------------------------\nPS C:\\\u003eRestore-DbaDatabase -SqlInstance server1\\instance1 -Path http://demo.blob.core.windows.net/backups/dbbackup.bak\nWill attempt to restore the backups from http://demo.blob.core.windows.net/backups/dbbackup.bak if a SAS credential with the name http://demo.blob.core.windows.net/backups exists on server1\\instance1\n-------------------------- EXAMPLE 9 --------------------------\nPS C:\\\u003e$File = Get-ChildItem c:\\backups, \\\\server1\\backups -recurse\nPS C:\\\u003e $File | Restore-DbaDatabase -SqlInstance Server1\\Instance -UseDestinationDefaultDirectories\nThis will take all of the files found under the folders c:\\backups and \\\\server1\\backups, and pipeline them into\r\nRestore-DbaDatabase. Restore-DbaDatabase will then scan all of the files, and restore all of the databases included\r\nto the latest point in time covered by their backups. All data and log files will be moved to the default SQL Server\r\nfolder for those file types as defined on the target instance.\n-------------------------- EXAMPLE 10 --------------------------\nPS C:\\\u003e$files = Get-ChildItem C:\\dbatools\\db1\nPS C:\\\u003e $files | Restore-DbaDatabase -SqlInstance server\\instance1 `\r\n\u003e\u003e -DestinationFilePrefix prefix -DatabaseName Restored  `\r\n\u003e\u003e -RestoreTime (get-date \"14:58:30 22/05/2017\") `\r\n\u003e\u003e -NoRecovery -WithReplace -StandbyDirectory C:\\dbatools\\standby\r\n\u003e\u003e\r\nPS C:\\\u003e #It\u0027s in standby so we can peek at it\r\nPS C:\\\u003e Invoke-DbaQuery -SQLInstance server\\instance1 -Query \"select top 1 * from Restored.dbo.steps order by dt desc\"\r\nPS C:\\\u003e #Not quite there so let\u0027s roll on a bit:\r\nPS C:\\\u003e $files | Restore-DbaDatabase -SqlInstance server\\instance1 `\r\n\u003e\u003e -DestinationFilePrefix prefix -DatabaseName Restored `\r\n\u003e\u003e -continue -WithReplace -RestoreTime (get-date \"15:09:30 22/05/2017\") `\r\n\u003e\u003e -StandbyDirectory C:\\dbatools\\standby\r\n\u003e\u003e\r\nPS C:\\\u003e Invoke-DbaQuery -SQLInstance server\\instance1 -Query \"select top 1 * from restored.dbo.steps order by dt desc\"\r\nPS C:\\\u003e Restore-DbaDatabase -SqlInstance server\\instance1 -DestinationFilePrefix prefix -DatabaseName Restored -Continue -WithReplace\nIn this example we step through the backup files held in c:\\dbatools\\db1 folder.\r\nFirst we restore the database to a point in time in standby mode. This means we can check some details in the databases\r\nWe then roll it on a further 9 minutes to perform some more checks\r\nAnd finally we continue by rolling it all the way forward to the latest point in the backup.\r\nAt each step, only the log files needed to roll the database forward are restored.\n-------------------------- EXAMPLE 11 --------------------------\nPS C:\\\u003eRestore-DbaDatabase -SqlInstance server\\instance1 -Path c:\\backups -DatabaseName example1 -NoRecovery\nPS C:\\\u003e Restore-DbaDatabase -SqlInstance server\\instance1 -Recover -DatabaseName example1\nIn this example we restore example1 database with no recovery, and then the second call is to set the database to recovery.\n-------------------------- EXAMPLE 12 --------------------------\nPS C:\\\u003eGet-DbaBackupHistory - SqlInstance server\\instance1 -Database ProdFinance -Last | Restore-DbaDatabase -PageRestore\nPS C:\\\u003e $SuspectPage -PageRestoreTailFolder c:\\temp -TrustDbBackupHistory -AllowContinues\nGets a list of Suspect Pages using Get-DbaSuspectPage. The uses Get-DbaBackupHistory and Restore-DbaDatabase to perform a restore of the suspect pages and bring them up to date\r\nIf server\\instance1 is Enterprise edition this will be done online, if not it will be performed offline\r\nAllowContinue is required to make sure we cope with existing files\n-------------------------- EXAMPLE 13 --------------------------\nPS C:\\\u003e$BackupHistory = Get-DbaBackupInformation -SqlInstance sql2005 -Path \\\\backups\\sql2000\\ProdDb\nPS C:\\\u003e $BackupHistory | Restore-DbaDatabase -SqlInstance sql2000 -TrustDbBackupHistory\nDue to SQL Server 2000 not returning all the backup headers we cannot restore directly. As this is an issues with the SQL engine all we can offer is the following workaround\r\nThis will use a SQL Server instance \u003e 2000 to read the headers, and then pass them in to Restore-DbaDatabase as a BackupHistory object.\n-------------------------- EXAMPLE 14 --------------------------\nPS C:\\\u003eRestore-DbaDatabase -SqlInstance server1\\instance1 -Path \"C:\\Temp\\devops_prod_full.bak\" -DatabaseName \"DevOps_DEV\" -ReplaceDbNameInFile\nPS C:\\\u003e Rename-DbaDatabase -SqlInstance server1\\instance1 -Database \"DevOps_DEV\" -LogicalName \"\u003cDBN\u003e_\u003cFT\u003e\"\nThis will restore the database from the \"C:\\Temp\\devops_prod_full.bak\" file, with the new name \"DevOps_DEV\" and store the different physical files with the new name. It will use the system default \r\nconfigured data and log locations.\r\nAfter the restore the logical names of the database files will be renamed with the \"DevOps_DEV_ROWS\" for MDF/NDF and \"DevOps_DEV_LOG\" for LDF\n-------------------------- EXAMPLE 15 --------------------------\nPS C:\\\u003e$FileStructure = @{\n\u003e\u003e \u0027database_data\u0027 = \u0027C:\\Data\\database_data.mdf\u0027\r\n\u003e\u003e \u0027database_log\u0027 = \u0027C:\\Log\\database_log.ldf\u0027\r\n\u003e\u003e }\r\n\u003e\u003e\r\nPS C:\\\u003e Restore-DbaDatabase -SqlInstance server1 -Path \\\\ServerName\\ShareName\\File -DatabaseName database -FileMapping $FileStructure\nRestores \u0027database\u0027 to \u0027server1\u0027 and moves the files to new locations. The format for the $FileStructure HashTable is the file logical name as the Key, and the new location as the Value.",
        "Syntax":  "Restore-DbaDatabase -SqlInstance \u003cDbaInstanceParameter\u003e [-SqlCredential \u003cPSCredential\u003e] -Path \u003cObject[]\u003e [-DatabaseName \u003cObject[]\u003e] [-DestinationDataDirectory \u003cString\u003e] [-DestinationLogDirectory \u003cString\u003e] [-DestinationFileStreamDirectory \u003cString\u003e] [-RestoreTime \u003cDateTime\u003e] [-NoRecovery] [-WithReplace] [-XpDirTree] [-OutputScriptOnly] [-VerifyOnly] [-MaintenanceSolutionBackup] [-FileMapping \u003cHashtable\u003e] [-IgnoreLogBackup] [-UseDestinationDefaultDirectories] [-ReuseSourceFolderStructure] [-DestinationFilePrefix \u003cString\u003e] [-RestoredDatabaseNamePrefix \u003cString\u003e] [-TrustDbBackupHistory] \r\n[-MaxTransferSize \u003cInt32\u003e] [-BlockSize \u003cInt32\u003e] [-BufferCount \u003cInt32\u003e] [-DirectoryRecurse] [-EnableException] [-StandbyDirectory \u003cString\u003e] [-Continue] [-AzureCredential \u003cString\u003e] [-ReplaceDbNameInFile] [-DestinationFileSuffix \u003cString\u003e] [-KeepCDC] [-AllowContinue] [-GetBackupInformation \u003cString\u003e] [-StopAfterGetBackupInformation] [-SelectBackupInformation \u003cString\u003e] [-StopAfterSelectBackupInformation] [-FormatBackupInformation \u003cString\u003e] [-StopAfterFormatBackupInformation] [-TestBackupInformation \u003cString\u003e] [-StopAfterTestBackupInformation] [-StatementTimeout \u003cInt32\u003e] [-WhatIf] [-Confirm] \r\n[\u003cCommonParameters\u003e]\nRestore-DbaDatabase -SqlInstance \u003cDbaInstanceParameter\u003e [-SqlCredential \u003cPSCredential\u003e] -Path \u003cObject[]\u003e [-DatabaseName \u003cObject[]\u003e] [-OutputScriptOnly] [-TrustDbBackupHistory] [-MaxTransferSize \u003cInt32\u003e] [-BlockSize \u003cInt32\u003e] [-BufferCount \u003cInt32\u003e] [-EnableException] [-AzureCredential \u003cString\u003e] [-AllowContinue] [-GetBackupInformation \u003cString\u003e] [-StopAfterGetBackupInformation] [-SelectBackupInformation \u003cString\u003e] [-StopAfterSelectBackupInformation] [-FormatBackupInformation \u003cString\u003e] [-StopAfterFormatBackupInformation] [-TestBackupInformation \u003cString\u003e] [-StopAfterTestBackupInformation] \r\n-PageRestore \u003cObject\u003e -PageRestoreTailFolder \u003cString\u003e [-StatementTimeout \u003cInt32\u003e] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nRestore-DbaDatabase -SqlInstance \u003cDbaInstanceParameter\u003e [-SqlCredential \u003cPSCredential\u003e] [-DatabaseName \u003cObject[]\u003e] [-OutputScriptOnly] [-EnableException] [-AzureCredential \u003cString\u003e] [-Recover] [-AllowContinue] [-GetBackupInformation \u003cString\u003e] [-StopAfterGetBackupInformation] [-SelectBackupInformation \u003cString\u003e] [-StopAfterSelectBackupInformation] [-FormatBackupInformation \u003cString\u003e] [-StopAfterFormatBackupInformation] [-TestBackupInformation \u003cString\u003e] [-StopAfterTestBackupInformation] [-StatementTimeout \u003cInt32\u003e] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Restore-DbaDbCertificate",
        "Description":  "Imports certificates from.cer files using SMO.",
        "Tags":  [
                     "Migration",
                     "Certificate"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Path",
                           "The Path the contains the certificate and private key files. The path can be a directory or a specific certificate.",
                           "FullName",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EncryptionPassword",
                           "If specified this will be used to encrypt the private key.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database where the certificate imports into. Defaults to master.",
                           "",
                           false,
                           "false",
                           "master"
                       ],
                       [
                           "SecurePassword",
                           "Secure string used to decrypt the private key.",
                           "Password",
                           false,
                           "false",
                           "(Read-Host \"Password\" -AsSecureString)"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Restore-DbaDatabaseCertificate",
        "Author":  "Jess Pomfret (@jpomfret), jesspomfret.com",
        "Synopsis":  "Imports certificates from .cer files using SMO.",
        "Name":  "Restore-DbaDbCertificate",
        "Links":  "https://dbatools.io/Restore-DbaDbCertificate",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRestore-DbaDbCertificate -SqlInstance Server1 -Path \\\\Server1\\Certificates -SecurePassword (ConvertTo-SecureString -Force -AsPlainText GoodPass1234!!)\nRestores all the certificates in the specified path, password is used to both decrypt and encrypt the private key.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eRestore-DbaDbCertificate -SqlInstance Server1 -Path \\\\Server1\\Certificates\\DatabaseTDE.cer -SecurePassword (ConvertTo-SecureString -force -AsPlainText GoodPass1234!!)\nRestores the DatabaseTDE certificate to Server1 and uses the MasterKey to encrypt the private key.",
        "Syntax":  "Restore-DbaDbCertificate [-SqlInstance] \u003cDbaInstanceParameter\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-Path] \u003cObject[]\u003e [[-EncryptionPassword] \u003cSecureString\u003e] [[-Database] \u003cString\u003e] [[-SecurePassword] \u003cSecureString\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Restore-DbaDbSnapshot",
        "Description":  "Restores the database from the snapshot, discarding every modification made to the database\nNB: Restoring to a snapshot will result in every other snapshot of the same database to be dropped\nIt also fixes some long-standing bugs in SQL Server when restoring from snapshots",
        "Tags":  [
                     "Snapshot",
                     "Backup",
                     "Restore",
                     "Database"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances",
                           "ServerInstance,SqlServer",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Credential object used to connect to the SQL Server as a different user",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Restores from the last snapshot databases with this names only. You can pass either Databases or Snapshots",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Snapshot",
                           "Restores databases from snapshots with this names only. You can pass either Databases or Snapshots",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Allows piping from other Snapshot commands",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Force",
                           "If restoring from a snapshot involves dropping any other snapshot, you need to explicitly\r\nuse -Force to let this command delete the ones not involved in the restore process.\r\nAlso, -Force will forcibly kill all running queries that prevent the restore process.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts for confirmation of every step.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Restore-DbaDatabaseSnapshot",
        "Author":  "Simone Bizzotto (@niphold)",
        "Synopsis":  "Restores databases from snapshots",
        "Name":  "Restore-DbaDbSnapshot",
        "Links":  "https://dbatools.io/Restore-DbaDbSnapshot",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRestore-DbaDbSnapshot -SqlInstance sql2014 -Database HR, Accounting\nRestores HR and Accounting databases using the latest snapshot available\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eRestore-DbaDbSnapshot -SqlInstance sql2014 -Database HR -Force\nRestores HR database from latest snapshot and kills any active connections in the database on sql2014.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaDbSnapshot -SqlInstance sql2016 -Database HR | Restore-DbaDbSnapshot -Force\nRestores HR database from latest snapshot and kills any active connections in the database on sql2016.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaDbSnapshot -SqlInstance sql2016 | Out-GridView -PassThru | Restore-DbaDbSnapshot\nAllows the selection of snapshots on sql2016 to restore\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eRestore-DbaDbSnapshot -SqlInstance sql2014 -Snapshot HR_snap_20161201, Accounting_snap_20161101\nRestores databases from snapshots named HR_snap_20161201 and Accounting_snap_20161101",
        "Syntax":  "Restore-DbaDbSnapshot [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [[-Snapshot] \u003cObject[]\u003e] [[-InputObject] \u003cDatabase[]\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Resume-DbaAgDbDataMovement",
        "Description":  "Resumes data movement for an availability group database on a SQL Server instance.",
        "Tags":  [
                     "AvailabilityGroup",
                     "HA",
                     "AG"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. Server version must be SQL Server version 2012 or higher.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the SqlInstance instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AvailabilityGroup",
                           "The availability group where the database movement will be resumeed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database or databases to resume movement upon.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Enables piping from Get-DbaAgDatabase",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Resumes data movement for an availability group database on a SQL Server instance.",
        "Name":  "Resume-DbaAgDbDataMovement",
        "Links":  "https://dbatools.io/Resume-DbaAgDbDataMovement",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eResume-DbaAgDbDataMovement -SqlInstance sql2017a -AvailabilityGroup ag1 -Database db1, db2\nResumes data movement on db1 and db2 to ag1 on sql2017a. Prompts for confirmation.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaAgDatabase -SqlInstance sql2017a, sql2019 | Out-GridView -Passthru | Resume-DbaAgDbDataMovement -Confirm:$false\nResumes data movement on the selected availability group databases. Does not prompt for confirmation.",
        "Syntax":  "Resume-DbaAgDbDataMovement [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-AvailabilityGroup] \u003cString\u003e] [[-Database] \u003cString[]\u003e] [[-InputObject] \u003cAvailabilityDatabase[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Revoke-DbaAgPermission",
        "Description":  "Revokes endpoint and availability group permissions to a login.",
        "Tags":  [
                     "AvailabilityGroup",
                     "HA",
                     "AG"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. Server version must be SQL Server version 2012 or higher.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the SqlInstance instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Login",
                           "The login or logins to modify.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AvailabilityGroup",
                           "Only modify specific availability groups.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Type",
                           "Specify type: Endpoint or AvailabilityGroup. Endpoint will modify the DatabaseMirror endpoint type.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "Permission",
                           "Revokes one or more permissions:\r\n    Alter\r\n    Connect\r\n    Control\r\n    CreateAnyDatabase\r\n    CreateSequence\r\n    Delete\r\n    Execute\r\n    Impersonate\r\n    Insert\r\n    Receive\r\n    References\r\n    Select\r\n    Send\r\n    TakeOwnership\r\n    Update\r\n    ViewChangeTracking\r\n    ViewDefinition\nConnect is default.",
                           "",
                           false,
                           "false",
                           "Connect"
                       ],
                       [
                           "InputObject",
                           "Enables piping from Get-DbaLogin.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Revokes endpoint and availability group permissions to a login.",
        "Name":  "Revoke-DbaAgPermission",
        "Links":  "https://dbatools.io/Revoke-DbaAgPermission",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eRevoke-DbaAgPermission -SqlInstance sql2017a -Type AvailabilityGroup -AvailabilityGroup SharePoint -Login ad\\spservice -Permission CreateAnyDatabase\nRemoves CreateAnyDatabase permissions from ad\\spservice on the SharePoint availability group on sql2017a. Does not prompt for confirmation.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eRevoke-DbaAgPermission -SqlInstance sql2017a -Type AvailabilityGroup -AvailabilityGroup ag1, ag2 -Login ad\\spservice -Permission CreateAnyDatabase -Confirm\nRemoves CreateAnyDatabase permissions from ad\\spservice on the ag1 and ag2 availability groups on sql2017a. Prompts for confirmation.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaLogin -SqlInstance sql2017a | Out-GridView -Passthru | Revoke-DbaAgPermission -Type EndPoint\nRevokes the selected logins Connect permissions on the DatabaseMirroring endpoint for sql2017a.",
        "Syntax":  "Revoke-DbaAgPermission [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Login] \u003cString[]\u003e] [[-AvailabilityGroup] \u003cString[]\u003e] [-Type] \u003cString[]\u003e [[-Permission] \u003cString[]\u003e] [[-InputObject] \u003cLogin[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Save-DbaDiagnosticQueryScript",
        "Description":  "The dbatools module will have the diagnostic queries pre-installed. Use this only to update to a more recent version or specific versions.\n\nThis function is mainly used by Invoke-DbaDiagnosticQuery, but can also be used independently to download the Glenn Berry DMV scripts.\n\nUse this function to pre-download the scripts from a device with an Internet connection.\n\nThe function Invoke-DbaDiagnosticQuery will try to download these scripts automatically, but it obviously needs an internet connection to do that.",
        "Tags":  [
                     "Diagnostic",
                     "DMV",
                     "Troubleshooting"
                 ],
        "Params":  [
                       [
                           "Path",
                           "Specifies the path to the output",
                           "",
                           false,
                           "false",
                           "[Environment]::GetFolderPath(\"mydocuments\")"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Andre Kamman (@AndreKamman), http://clouddba.io",
        "Synopsis":  "Save-DbaDiagnosticQueryScript downloads the most recent version of all Glenn Berry DMV scripts",
        "Name":  "Save-DbaDiagnosticQueryScript",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eSave-DbaDiagnosticQueryScript -Path c:\\temp\nDownloads the most recent version of all Glenn Berry DMV scripts to the specified location.\r\nIf Path is not specified, the \"My Documents\" location will be used.",
        "Syntax":  "Save-DbaDiagnosticQueryScript [[-Path] \u003cFileInfo\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Select-DbaBackupInformation",
        "Description":  "Select-DbaBackupInformation filters out a subset of backups from the dbatools backup history object with parameters supplied.",
        "Tags":  [
                     "Backup",
                     "Restore"
                 ],
        "Params":  [
                       [
                           "BackupHistory",
                           "A dbatools.BackupHistory object containing backup history records",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "RestoreTime",
                           "The point in time you want to restore to",
                           "",
                           false,
                           "false",
                           "(get-date).addmonths(1)"
                       ],
                       [
                           "IgnoreLogs",
                           "This switch will cause Log Backups to be ignored. So will restore to the last Full or Diff backup only",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "IgnoreDiffs",
                           "This switch will cause Differential backups to be ignored. Unless IgnoreLogs is specified, restore to point in time will still occur, just using all available log backups",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "DatabaseName",
                           "A string array of Database Names that you want to filter to",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ServerName",
                           "A string array of Server Names that you want to filter",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ContinuePoints",
                           "The Output of Get-RestoreContinuableDatabase while provides \u0027Database\u0027,redo_start_lsn,\u0027FirstRecoveryForkID\u0027 values. Used to filter backups to continue a restore on a database\r\nSets IgnoreDiffs, and also filters databases to only those within the ContinuePoints object, or the ContinuePoints object AND DatabaseName if both specified",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "LastRestoreType",
                           "The Output of Get-DbaDbRestoreHistory -last\r\nThis is used to check the last type of backup to a database to see if a differential backup can be restored",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Stuart Moore (@napalmgram), stuart-moore.com",
        "Synopsis":  "Select a subset of backups from a dbatools backup history object",
        "Name":  "Select-DbaBackupInformation",
        "Links":  "https://dbatools.io/Select-DbaBackupInformation",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003e$Backups = Get-DbaBackupInformation -SqlInstance Server1 -Path \\\\server1\\backups$\nPS C:\\\u003e $FilteredBackups = $Backups | Select-DbaBackupInformation -RestoreTime (Get-Date).AddHours(-1)\nReturns all backups needed to restore all the backups in \\\\server1\\backups$ to 1 hour ago\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e$Backups = Get-DbaBackupInformation -SqlInstance Server1 -Path \\\\server1\\backups$\nPS C:\\\u003e $FilteredBackups = $Backups | Select-DbaBackupInformation -RestoreTime (Get-Date).AddHours(-1) -DatabaseName ProdFinance\nReturns all the backups needed to restore Database ProdFinance to an hour ago\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003e$Backups = Get-DbaBackupInformation -SqlInstance Server1 -Path \\\\server1\\backups$\nPS C:\\\u003e $FilteredBackups = $Backups | Select-DbaBackupInformation -RestoreTime (Get-Date).AddHours(-1) -IgnoreLogs\nReturns all the backups in \\\\server1\\backups$ to restore to as close prior to 1 hour ago as can be managed with only full and differential backups\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003e$Backups = Get-DbaBackupInformation -SqlInstance Server1 -Path \\\\server1\\backups$\nPS C:\\\u003e $FilteredBackups = $Backups | Select-DbaBackupInformation -RestoreTime (Get-Date).AddHours(-1) -IgnoreDiffs\nReturns all the backups in \\\\server1\\backups$ to restore to 1 hour ago using only Full and Diff backups.",
        "Syntax":  "Select-DbaBackupInformation [-BackupHistory] \u003cObject\u003e [[-RestoreTime] \u003cDateTime\u003e] [-IgnoreLogs] [-IgnoreDiffs] [[-DatabaseName] \u003cString[]\u003e] [[-ServerName] \u003cString[]\u003e] [[-ContinuePoints] \u003cObject\u003e] [[-LastRestoreType] \u003cObject\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Set-DbaAgentAlert",
        "Description":  "Set-DbaAgentAlert updates an alert in the SQL Server Agent with parameters supplied.",
        "Tags":  [
                     "Agent",
                     "Alert"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2000 or greater.",
                           "ServerInstance,SqlServer",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Alert",
                           "The name of the alert.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "NewName",
                           "The new name for the alert.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Enabled",
                           "Enabled the alert.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Disabled",
                           "Disabled the alert.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Force",
                           "The force parameter will ignore some errors in the parameters and assume defaults.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "InputObject",
                           "Enables piping alert objects",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Garry Bargsley (@gbargsley), garrybargsley.com",
        "Synopsis":  "Set-DbaAgentAlert updates a the status of a SQL Agent Alert.",
        "Name":  "Set-DbaAgentAlert",
        "Links":  "https://dbatools.io/Set-DbaAgentAlert",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eSet-DbaAgentAlert -SqlInstance sql1 -Alert \u0027Severity 025: Fatal Error\u0027 -Disabled\nChanges the alert to disabled.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eSet-DbaAgentAlert -SqlInstance sql1 -Alert \u0027Severity 025: Fatal Error\u0027, \u0027Error Number 825\u0027, \u0027Error Number 824\u0027 -Enabled\nChanges multiple alerts to enabled.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eSet-DbaAgentAlert -SqlInstance sql1, sql2, sql3 -Alert \u0027Severity 025: Fatal Error\u0027, \u0027Error Number 825\u0027, \u0027Error Number 824\u0027 -Enabled\nChanges multiple alerts to enabled on multiple servers.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eSet-DbaAgentAlert -SqlInstance sql1 -Alert \u0027Severity 025: Fatal Error\u0027 -Disabled -WhatIf\nDoesn\u0027t Change the alert but shows what would happen.",
        "Syntax":  "Set-DbaAgentAlert [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Alert] \u003cObject[]\u003e] [[-NewName] \u003cString\u003e] [-Enabled] [-Disabled] [-Force] [[-InputObject] \u003cAlert[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Set-DbaAgentJob",
        "Description":  "Set-DbaAgentJob updates a job in the SQL Server Agent with parameters supplied.",
        "Tags":  [
                     "Agent",
                     "Job"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2000 or greater.",
                           "ServerInstance,SqlServer",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Job",
                           "The name of the job.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Schedule",
                           "Schedule to attach to job. This can be more than one schedule.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ScheduleId",
                           "Schedule ID to attach to job. This can be more than one schedule ID.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "NewName",
                           "The new name for the job.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Enabled",
                           "Enabled the job.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Disabled",
                           "Disabled the job",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Description",
                           "The description of the job.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "StartStepId",
                           "The identification number of the first step to execute for the job.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "Category",
                           "The category of the job.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "OwnerLogin",
                           "The name of the login that owns the job.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EventLogLevel",
                           "Specifies when to place an entry in the Microsoft Windows application log for this job.\r\nAllowed values 0, \"Never\", 1, \"OnSuccess\", 2, \"OnFailure\", 3, \"Always\"\r\nThe text value van either be lowercase, uppercase or something in between as long as the text is correct.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EmailLevel",
                           "Specifies when to send an e-mail upon the completion of this job.\r\nAllowed values 0, \"Never\", 1, \"OnSuccess\", 2, \"OnFailure\", 3, \"Always\"\r\nThe text value van either be lowercase, uppercase or something in between as long as the text is correct.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "NetsendLevel",
                           "Specifies when to send a network message upon the completion of this job.\r\nAllowed values 0, \"Never\", 1, \"OnSuccess\", 2, \"OnFailure\", 3, \"Always\"\r\nThe text value van either be lowercase, uppercase or something in between as long as the text is correct.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "PageLevel",
                           "Specifies when to send a page upon the completion of this job.\r\nAllowed values 0, \"Never\", 1, \"OnSuccess\", 2, \"OnFailure\", 3, \"Always\"\r\nThe text value van either be lowercase, uppercase or something in between as long as the text is correct.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EmailOperator",
                           "The e-mail name of the operator to whom the e-mail is sent when EmailLevel is reached.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "NetsendOperator",
                           "The name of the operator to whom the network message is sent.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "PageOperator",
                           "The name of the operator to whom a page is sent.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "DeleteLevel",
                           "Specifies when to delete the job.\r\nAllowed values 0, \"Never\", 1, \"OnSuccess\", 2, \"OnFailure\", 3, \"Always\"\r\nThe text value van either be lowercase, uppercase or something in between as long as the text is correct.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Force",
                           "The force parameter will ignore some errors in the parameters and assume defaults.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "InputObject",
                           "Enables piping job objects",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Sander Stad (@sqlstad), sqlstad.nl",
        "Synopsis":  "Set-DbaAgentJob updates a job.",
        "Name":  "Set-DbaAgentJob",
        "Links":  "https://dbatools.io/Set-DbaAgentJob",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eSet-DbaAgentJob sql1 -Job Job1 -Disabled\nChanges the job to disabled\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eSet-DbaAgentJob sql1 -Job Job1 -OwnerLogin user1\nChanges the owner of the job\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eSet-DbaAgentJob -SqlInstance sql1 -Job Job1 -EventLogLevel OnSuccess\nChanges the job and sets the notification to write to the Windows Application event log on success\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eSet-DbaAgentJob -SqlInstance sql1 -Job Job1 -EmailLevel OnFailure -EmailOperator dba\nChanges the job and sets the notification to send an e-mail to the e-mail operator\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eSet-DbaAgentJob -SqlInstance sql1 -Job Job1, Job2, Job3 -Enabled\nChanges multiple jobs to enabled\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eSet-DbaAgentJob -SqlInstance sql1, sql2, sql3 -Job Job1, Job2, Job3 -Enabled\nChanges multiple jobs to enabled on multiple servers\n-------------------------- EXAMPLE 7 --------------------------\nPS C:\\\u003eSet-DbaAgentJob -SqlInstance sql1 -Job Job1 -Description \u0027Just another job\u0027 -Whatif\nDoesn\u0027t Change the job but shows what would happen.\n-------------------------- EXAMPLE 8 --------------------------\nPS C:\\\u003eSet-DbaAgentJob -SqlInstance sql1, sql2, sql3 -Job \u0027Job One\u0027 -Description \u0027Job One\u0027\nChanges a job with the name \"Job1\" on multiple servers to have another description\n-------------------------- EXAMPLE 9 --------------------------\nPS C:\\\u003esql1, sql2, sql3 | Set-DbaAgentJob -Job Job1 -Description \u0027Job One\u0027\nChanges a job with the name \"Job1\" on multiple servers to have another description using pipe line",
        "Syntax":  "Set-DbaAgentJob [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Job] \u003cObject[]\u003e] [[-Schedule] \u003cObject[]\u003e] [[-ScheduleId] \u003cInt32[]\u003e] [[-NewName] \u003cString\u003e] [-Enabled] [-Disabled] [[-Description] \u003cString\u003e] [[-StartStepId] \u003cInt32\u003e] [[-Category] \u003cString\u003e] [[-OwnerLogin] \u003cString\u003e] [[-EventLogLevel] \u003cObject\u003e] [[-EmailLevel] \u003cObject\u003e] [[-NetsendLevel] \u003cObject\u003e] [[-PageLevel] \u003cObject\u003e] [[-EmailOperator] \u003cString\u003e] [[-NetsendOperator] \u003cString\u003e] [[-PageOperator] \u003cString\u003e] [[-DeleteLevel] \u003cObject\u003e] [-Force] [[-InputObject] \u003cJob[]\u003e] [-EnableException] [-WhatIf] [-Confirm] \r\n[\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Set-DbaAgentJobCategory",
        "Description":  "Set-DbaAgentJobCategory makes it possible to change a job category.",
        "Tags":  [
                     "Agent",
                     "Job",
                     "JobCategory"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2000 or greater.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Category",
                           "The name of the category",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "NewName",
                           "New name of the job category",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Force",
                           "The force parameter will ignore some errors in the parameters and assume defaults.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Sander Stad (@sqlstad), sqlstad.nl",
        "Synopsis":  "Set-DbaAgentJobCategory changes a job category.",
        "Name":  "Set-DbaAgentJobCategory",
        "Links":  "https://dbatools.io/Set-DbaAgentJobCategory",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eNew-DbaAgentJobCategory -SqlInstance sql1 -Category \u0027Category 1\u0027 -NewName \u0027Category 2\u0027\nChange the name of the category from \u0027Category 1\u0027 to \u0027Category 2\u0027.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eSet-DbaAgentJobCategory -SqlInstance sql1, sql2 -Category Category1, Category2 -NewName cat1, cat2\nRename multiple jobs in one go on multiple servers.",
        "Syntax":  "Set-DbaAgentJobCategory [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Category] \u003cString[]\u003e] [[-NewName] \u003cString[]\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Set-DbaAgentJobOutputFile",
        "Description":  "Sets the Output File for a step of an agent job with the Job Names and steps provided dynamically if required",
        "Tags":  [
                     "Agent",
                     "Job",
                     "SqlAgent"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue, ByPropertyName)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Credential object used to connect to the SQL Server as a different user be it Windows or SQL Server. Windows users are determined by the existence of a backslash, so if you are intending to use an \r\nalternative Windows connection instead of a SQL login, ensure it contains a backslash.",
                           "",
                           false,
                           "true (ByValue, ByPropertyName)",
                           ""
                       ],
                       [
                           "Job",
                           "The job to process - this list is auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Step",
                           "The Agent Job Step to provide Output File Path for. Also available dynamically",
                           "",
                           false,
                           "true (ByValue, ByPropertyName)",
                           ""
                       ],
                       [
                           "OutputFile",
                           "The Full Path to the New Output file",
                           "",
                           true,
                           "true (ByValue, ByPropertyName)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Rob Sewell, https://sqldbawithabeard.com",
        "Synopsis":  "Set the output file for a step within an Agent job.",
        "Name":  "Set-DbaAgentJobOutputFile",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eSet-DbaAgentJobOutputFile -SqlInstance SERVERNAME -Job \u0027The Agent Job\u0027 -OutPutFile E:\\Logs\\AgentJobStepOutput.txt\nSets the Job step for The Agent job on SERVERNAME to E:\\Logs\\AgentJobStepOutput.txt",
        "Syntax":  "Set-DbaAgentJobOutputFile [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Job \u003cObject[]\u003e] [-Step \u003cObject[]\u003e] -OutputFile \u003cString\u003e [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Set-DbaAgentJobOwner",
        "Description":  "This function alters SQL Agent Job ownership to match a specified login if their current owner does not match the target login. By default, the target login will be \u0027sa\u0027,\nbut the the user may specify a different login for ownership. This be applied to all jobs or only to a select collection of jobs.\n\nBest practice reference: http://sqlmag.com/blog/sql-server-tip-assign-ownership-jobs-sysadmin-account\n\nIf the \u0027sa\u0027 account was renamed, the new name will be used.",
        "Tags":  [
                     "Agent",
                     "Job"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Job",
                           "Specifies the job(s) to process. Options for this list are auto-populated from the server. If unspecified, all jobs will be processed.",
                           "Jobs",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeJob",
                           "Specifies the job(s) to exclude from processing. Options for this list are auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Enables piped input from Get-DbaAgentJob",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Login",
                           "Specifies the login that you wish check for ownership. This defaults to \u0027sa\u0027 or the sysadmin name if sa was renamed. This must be a valid security principal which exists on the target server.",
                           "TargetLogin",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Set-DbaJobOwner",
        "Author":  "Michael Fal (@Mike_Fal), http://mikefal.net",
        "Synopsis":  "Sets SQL Agent job owners with a desired login if jobs do not match that owner.",
        "Name":  "Set-DbaAgentJobOwner",
        "Links":  "https://dbatools.io/Set-DbaAgentJobOwner",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eSet-DbaAgentJobOwner -SqlInstance localhost\nSets SQL Agent Job owner to sa on all jobs where the owner does not match sa.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eSet-DbaAgentJobOwner -SqlInstance localhost -Login DOMAIN\\account\nSets SQL Agent Job owner to \u0027DOMAIN\\account\u0027 on all jobs where the owner does not match \u0027DOMAIN\\account\u0027. Note\r\nthat Login must be a valid security principal that exists on the target server.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eSet-DbaAgentJobOwner -SqlInstance localhost -Job job1, job2\nSets SQL Agent Job owner to \u0027sa\u0027 on the job1 and job2 jobs if their current owner does not match \u0027sa\u0027.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003e\u0027sqlserver\u0027,\u0027sql2016\u0027 | Set-DbaAgentJobOwner\nSets SQL Agent Job owner to sa on all jobs where the owner does not match sa on both sqlserver and sql2016.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eGet-DbaAgentJob -SqlInstance vmsql | Where-Object OwnerLoginName -eq login1 | Set-DbaAgentJobOwner -TargetLogin login2 | Out-Gridview\nSets SQL Agent Job owner to login2 where their current owner is login1 on instance vmsql. Send result to gridview.",
        "Syntax":  "Set-DbaAgentJobOwner [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Job] \u003cObject[]\u003e] [[-ExcludeJob] \u003cObject[]\u003e] [[-InputObject] \u003cJob[]\u003e] [[-Login] \u003cString\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Set-DbaAgentJobStep",
        "Description":  "Set-DbaAgentJobStep updates a job step in the SQL Server Agent with parameters supplied.",
        "Tags":  [
                     "Agent",
                     "Job",
                     "JobStep"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2000 or greater.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Job",
                           "The name of the job. Can be null if the the job id is being used.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "StepName",
                           "The name of the step.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "NewName",
                           "The new name for the step in case it needs to be renamed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Subsystem",
                           "The subsystem used by the SQL Server Agent service to execute command.\r\nAllowed values \u0027ActiveScripting\u0027,\u0027AnalysisCommand\u0027,\u0027AnalysisQuery\u0027,\u0027CmdExec\u0027,\u0027Distribution\u0027,\u0027LogReader\u0027,\u0027Merge\u0027,\u0027PowerShell\u0027,\u0027QueueReader\u0027,\u0027Snapshot\u0027,\u0027Ssis\u0027,\u0027TransactSql\u0027",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Command",
                           "The commands to be executed by SQLServerAgent service through subsystem.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "CmdExecSuccessCode",
                           "The value returned by a CmdExec subsystem command to indicate that command executed successfully.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "OnSuccessAction",
                           "The action to perform if the step succeeds.\r\nAllowed values  \"QuitWithSuccess\" (default), \"QuitWithFailure\", \"GoToNextStep\", \"GoToStep\".\r\nThe text value van either be lowercase, uppercase or something in between as long as the text is correct.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "OnSuccessStepId",
                           "The ID of the step in this job to execute if the step succeeds and OnSuccessAction is \"GoToNextStep\".",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "OnFailAction",
                           "The action to perform if the step fails.\r\nAllowed values  \"QuitWithSuccess\" (default), \"QuitWithFailure\", \"GoToNextStep\", \"GoToStep\".\r\nThe text value van either be lowercase, uppercase or something in between as long as the text is correct.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "OnFailStepId",
                           "The ID of the step in this job to execute if the step fails and OnFailAction is \"GoToNextStep\".",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "Database",
                           "The name of the database in which to execute a Transact-SQL step. The default is \u0027master\u0027.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "DatabaseUser",
                           "The name of the user account to use when executing a Transact-SQL step. The default is \u0027sa\u0027.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "RetryAttempts",
                           "The number of retry attempts to use if this step fails. The default is 0.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "RetryInterval",
                           "The amount of time in minutes between retry attempts. The default is 0.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "OutputFileName",
                           "The name of the file in which the output of this step is saved.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Flag",
                           "Sets the flag(s) for the job step.\nFlag                                    Description\r\n----------------------------------------------------------------------------\r\nAppendAllCmdExecOutputToJobHistory      Job history, including command output, is appended to the job history file.\r\nAppendToJobHistory                      Job history is appended to the job history file.\r\nAppendToLogFile                         Job history is appended to the SQL Server log file.\r\nAppendToTableLog                        Job history is appended to a log table.\r\nLogToTableWithOverwrite                 Job history is written to a log table, overwriting previous contents.\r\nNone                                    Job history is not appended to a file.\r\nProvideStopProcessEvent                 Job processing is stopped.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ProxyName",
                           "The name of the proxy that the job step runs as.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Force",
                           "The force parameter will ignore some errors in the parameters and assume defaults.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Sander Stad (@sqlstad), sqlstad.nl",
        "Synopsis":  "Set-DbaAgentJobStep updates a job step.",
        "Name":  "Set-DbaAgentJobStep",
        "Links":  "https://dbatools.io/Set-DbaAgentJobStep",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eSet-DbaAgentJobStep -SqlInstance sql1 -Job Job1 -StepName Step1 -NewName Step2\nChanges the name of the step in \"Job1\" with the name Step1 to Step2\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eSet-DbaAgentJobStep -SqlInstance sql1 -Job Job1 -StepName Step1 -Database msdb\nChanges the database of the step in \"Job1\" with the name Step1 to msdb\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eSet-DbaAgentJobStep -SqlInstance sql1 -Job Job1, Job2 -StepName Step1 -Database msdb\nChanges job steps in multiple jobs with the name Step1 to msdb\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eSet-DbaAgentJobStep -SqlInstance sql1, sql2, sql3 -Job Job1, Job2 -StepName Step1 -Database msdb\nChanges job steps in multiple jobs on multiple servers with the name Step1 to msdb\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eSet-DbaAgentJobStep -SqlInstance sql1, sql2, sql3 -Job Job1 -StepName Step1 -Database msdb\nChanges the database of the step in \"Job1\" with the name Step1 to msdb for multiple servers\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003esql1, sql2, sql3 | Set-DbaAgentJobStep -Job Job1 -StepName Step1 -Database msdb\nChanges the database of the step in \"Job1\" with the name Step1 to msdb for multiple servers using pipeline",
        "Syntax":  "Set-DbaAgentJobStep [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-Job] \u003cObject[]\u003e [-StepName] \u003cString\u003e [[-NewName] \u003cString\u003e] [[-Subsystem] \u003cString\u003e] [[-Command] \u003cString\u003e] [[-CmdExecSuccessCode] \u003cInt32\u003e] [[-OnSuccessAction] \u003cString\u003e] [[-OnSuccessStepId] \u003cInt32\u003e] [[-OnFailAction] \u003cString\u003e] [[-OnFailStepId] \u003cInt32\u003e] [[-Database] \u003cString\u003e] [[-DatabaseUser] \u003cString\u003e] [[-RetryAttempts] \u003cInt32\u003e] [[-RetryInterval] \u003cInt32\u003e] [[-OutputFileName] \u003cString\u003e] [[-Flag] \u003cString[]\u003e] [[-ProxyName] \u003cString\u003e] [-EnableException] [-Force] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Set-DbaAgentSchedule",
        "Description":  "Set-DbaAgentSchedule will help update a schedule for a job. It does not attach the schedule to a job.",
        "Tags":  [
                     "Agent",
                     "Job",
                     "JobStep"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2000 or greater.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Job",
                           "The name of the job that has the schedule.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "ScheduleName",
                           "The name of the schedule.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "NewName",
                           "The new name for the schedule.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Enabled",
                           "Set the schedule to enabled.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Disabled",
                           "Set the schedule to disabled.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "FrequencyType",
                           "A value indicating when a job is to be executed.\r\nAllowed values are 1, \"Once\", 4, \"Daily\", 8, \"Weekly\", 16, \"Monthly\", 32, \"MonthlyRelative\", 64, \"AgentStart\", 128 or \"IdleComputer\"",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "FrequencyInterval",
                           "The days that a job is executed\r\nAllowed values are 1, \"Sunday\", 2, \"Monday\", 4, \"Tuesday\", 8, \"Wednesday\", 16, \"Thursday\", 32, \"Friday\", 64, \"Saturday\", 62, \"Weekdays\", 65, \"Weekend\", 127, \"EveryDay\".\r\nIf 62, \"Weekdays\", 65, \"Weekend\", 127, \"EveryDay\" is used it overwwrites any other value that has been passed before.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "FrequencySubdayType",
                           "Specifies the units for the subday FrequencyInterval.\r\nAllowed values are 1, \"Time\", 2, \"Seconds\", 4, \"Minutes\", 8 or \"Hours\"",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "FrequencySubdayInterval",
                           "The number of subday type periods to occur between each execution of a job.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "FrequencyRelativeInterval",
                           "A job\u0027s occurrence of FrequencyInterval in each month, if FrequencyInterval is 32 (monthlyrelative).",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "FrequencyRecurrenceFactor",
                           "The number of weeks or months between the scheduled execution of a job. FrequencyRecurrenceFactor is used only if FrequencyType is 8, \"Weekly\", 16, \"Monthly\", 32 or \"MonthlyRelative\".",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "StartDate",
                           "The date on which execution of a job can begin.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EndDate",
                           "The date on which execution of a job can stop.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "StartTime",
                           "The time on any day to begin execution of a job. Format HHMMSS / 24 hour clock.\r\nExample: \u0027010000\u0027 for 01:00:00 AM.\r\nExample: \u0027140000\u0027 for 02:00:00 PM.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EndTime",
                           "The time on any day to end execution of a job. Format HHMMSS / 24 hour clock.\r\nExample: \u0027010000\u0027 for 01:00:00 AM.\r\nExample: \u0027140000\u0027 for 02:00:00 PM.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Force",
                           "The force parameter will ignore some errors in the parameters and assume defaults.\r\nIt will also remove the any present schedules with the same name for the specific job.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Sander Stad (@sqlstad, sqlstad.nl)",
        "Synopsis":  "Set-DbaAgentSchedule updates a schedule in the msdb database.",
        "Name":  "Set-DbaAgentSchedule",
        "Links":  "https://dbatools.io/Set-DbaAgentSchedule",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eSet-DbaAgentSchedule -SqlInstance sql1 -Job Job1 -ScheduleName daily -Enabled\nChanges the schedule for Job1 with the name \u0027daily\u0027 to enabled\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eSet-DbaAgentSchedule -SqlInstance sql1 -Job Job1 -ScheduleName daily -NewName weekly -FrequencyType Weekly -FrequencyInterval Monday, Wednesday, Friday\nChanges the schedule for Job1 with the name daily to have a new name weekly\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eSet-DbaAgentSchedule -SqlInstance sql1 -Job Job1, Job2, Job3 -ScheduleName daily -StartTime \u0027230000\u0027\nChanges the start time of the schedule for Job1 to 11 PM for multiple jobs\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eSet-DbaAgentSchedule -SqlInstance sql1, sql2, sql3 -Job Job1 -ScheduleName daily -Enabled\nChanges the schedule for Job1 with the name daily to enabled on multiple servers\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003esql1, sql2, sql3 | Set-DbaAgentSchedule -Job Job1 -ScheduleName \u0027daily\u0027 -Enabled\nChanges the schedule for Job1 with the name \u0027daily\u0027 to enabled on multiple servers using pipe line",
        "Syntax":  "Set-DbaAgentSchedule [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-Job] \u003cObject[]\u003e [-ScheduleName] \u003cString\u003e [[-NewName] \u003cString\u003e] [-Enabled] [-Disabled] [[-FrequencyType] \u003cObject\u003e] [[-FrequencyInterval] \u003cObject[]\u003e] [[-FrequencySubdayType] \u003cObject\u003e] [[-FrequencySubdayInterval] \u003cInt32\u003e] [[-FrequencyRelativeInterval] \u003cObject\u003e] [[-FrequencyRecurrenceFactor] \u003cInt32\u003e] [[-StartDate] \u003cString\u003e] [[-EndDate] \u003cString\u003e] [[-StartTime] \u003cString\u003e] [[-EndTime] \u003cString\u003e] [-EnableException] [-Force] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Set-DbaAgentServer",
        "Description":  "Set-DbaAgentServer updates properties in the SQL Server Server with parameters supplied.",
        "Tags":  [
                     "Agent",
                     "Server"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2000 or greater.",
                           "ServerInstance,SqlServer",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Enables piping agent server objects",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "AgentLogLevel",
                           "Specifies the agent log level.\r\nAllowed values 1, \"Errors\", 2, \"Warnings\", 3, \"Errors, Warnings\", 4, \"Informational\", 5, \"Errors, Informational\", 6, \"Warnings, Informational\", 7, \"All\"\r\nThe text value can either be lowercase, uppercase or something in between as long as the text is correct.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AgentMailType",
                           "Specifies the agent mail type.\r\nAllowed values 0, \"SqlAgentMail\", 1, \"DatabaseMail\"\r\nThe text value can either be lowercase, uppercase or something in between as long as the text is correct.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AgentShutdownWaitTime",
                           "The Agent Shutdown Wait Time value of the server agent.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "DatabaseMailProfile",
                           "The Database Mail Profile to be used. Must exists on database mail profiles.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ErrorLogFile",
                           "Error log file location",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "IdleCpuDuration",
                           "Idle CPU Duration value to be used",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "IdleCpuPercentage",
                           "Idle CPU Percentage value to be used",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "CpuPolling",
                           "Enable or Disable the Polling.\r\nAllowed values Enabled, Disabled",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "LocalHostAlias",
                           "The value for Local Host Alias configuration",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "LoginTimeout",
                           "The value for Login Timeout configuration",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "MaximumHistoryRows",
                           "Indicates the Maximum job history log size (in rows). If you want to turn it off use the value -1",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "MaximumJobHistoryRows",
                           "Indicates the Maximum job history rows per job. If you want to turn it off use the value 0",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "NetSendRecipient",
                           "The Net send recipient value",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ReplaceAlertTokens",
                           "Enable or Disable the Token replacement property.\r\nAllowed values Enabled, Disabled",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SaveInSentFolder",
                           "Enable or Disable the copy of the sent messages is save in the Sent Items folder.\r\nAllowed values Enabled, Disabled",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlAgentAutoStart",
                           "Enable or Disable the SQL Agent Auto Start.\r\nAllowed values Enabled, Disabled",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlAgentMailProfile",
                           "The SQL Server Agent Mail Profile to be used. Must exists on database mail profiles.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlAgentRestart",
                           "Enable or Disable the SQL Agent Restart.\r\nAllowed values Enabled, Disabled",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlServerRestart",
                           "Enable or Disable the SQL Server Restart.\r\nAllowed values Enabled, Disabled",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "WriteOemErrorLog",
                           "Enable or Disable the Write OEM Error Log.\r\nAllowed values Enabled, Disabled",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Cláudio Silva (@claudioessilva), https://claudioessilva.com",
        "Synopsis":  "Set-DbaAgentServer updates properties of a SQL Agent Server.",
        "Name":  "Set-DbaAgentServer",
        "Links":  "https://dbatools.io/Set-DbaAgentServer",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eSet-DbaAgentServer -SqlInstance sql1 -MaximumHistoryRows 10000 -MaximumJobHistoryRows 100\nChanges the job history retention to 10000 rows with an maximum of 100 rows per job.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eSet-DbaAgentServer -SqlInstance sql1 -CpuPolling Enabled\nEnable the CPU Polling configurations.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eSet-DbaAgentServer -SqlInstance sql1, sql2, sql3 -AgentLogLevel \u0027Errors, Warnings\u0027\nSet the agent log level to Errors and Warnings on multiple servers.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eSet-DbaAgentServer -SqlInstance sql1 -CpuPolling Disabled\nDisable the CPU Polling configurations.",
        "Syntax":  "Set-DbaAgentServer [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-InputObject] \u003cJobServer[]\u003e] [[-AgentLogLevel] \u003cObject\u003e] [[-AgentMailType] \u003cObject\u003e] [[-AgentShutdownWaitTime] \u003cInt32\u003e] [[-DatabaseMailProfile] \u003cString\u003e] [[-ErrorLogFile] \u003cString\u003e] [[-IdleCpuDuration] \u003cInt32\u003e] [[-IdleCpuPercentage] \u003cInt32\u003e] [[-CpuPolling] \u003cString\u003e] [[-LocalHostAlias] \u003cString\u003e] [[-LoginTimeout] \u003cInt32\u003e] [[-MaximumHistoryRows] \u003cInt32\u003e] [[-MaximumJobHistoryRows] \u003cInt32\u003e] [[-NetSendRecipient] \u003cString\u003e] [[-ReplaceAlertTokens] \u003cString\u003e] [[-SaveInSentFolder] \u003cString\u003e] \r\n[[-SqlAgentAutoStart] \u003cString\u003e] [[-SqlAgentMailProfile] \u003cString\u003e] [[-SqlAgentRestart] \u003cString\u003e] [[-SqlServerRestart] \u003cString\u003e] [[-WriteOemErrorLog] \u003cString\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Set-DbaAgListener",
        "Description":  "Sets a listener property for an availability group on a SQL Server instance.\n\nBasically, only the port is settable at this time, so this command updates the listener port.",
        "Tags":  [
                     "AvailabilityGroup",
                     "HA",
                     "AG"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. Server version must be SQL Server version 2012 or higher.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the SqlInstance instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AvailabilityGroup",
                           "The Availability Group to which a property will be changed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Listener",
                           "Modify only specific listeners.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Port",
                           "Sets the port number used to communicate with the availability group.",
                           "",
                           true,
                           "false",
                           "0"
                       ],
                       [
                           "InputObject",
                           "Enables piping from Get-DbaAvailabilityGroup",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Sets a listener property for an availability group on a SQL Server instance.",
        "Name":  "Set-DbaAgListener",
        "Links":  "https://dbatools.io/Set-DbaAgListener",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eSet-DbaAgListener -SqlInstance sql2017 -AvailabilityGroup SharePoint -Port 14333\nChanges the port for the SharePoint AG Listener on sql2017. Prompts for confirmation.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaAgListener -SqlInstance sql2017 | Out-GridView -Passthru | Set-DbaAgListener -Port 1433 -Confirm:$false\nChanges the port for selected AG listeners to 1433. Does not prompt for confirmation.",
        "Syntax":  "Set-DbaAgListener [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-AvailabilityGroup] \u003cString[]\u003e] [[-Listener] \u003cString[]\u003e] [-Port] \u003cInt32\u003e [[-InputObject] \u003cAvailabilityGroup[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Set-DbaAgReplica",
        "Description":  "Sets the properties for a replica to an availability group on a SQL Server instance.\n\nAutomatically creates a database mirroring endpoint if required.",
        "Tags":  [
                     "AvailabilityGroup",
                     "HA",
                     "AG"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. Server version must be SQL Server version 2012 or higher.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the SqlInstance instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AvailabilityGroup",
                           "The availability group of the replica.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Replica",
                           "The replicas to modify.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AvailabilityMode",
                           "Sets the availability mode of the availability group replica. Options are: AsynchronousCommit and SynchronousCommit. SynchronousCommit is default.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "FailoverMode",
                           "Sets the failover mode of the availability group replica. Options are Automatic and Manual.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "BackupPriority",
                           "Sets the backup priority availability group replica. Default is 50.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "ConnectionModeInPrimaryRole",
                           "Sets the connection intent modes of an Availability Replica in primary role.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ConnectionModeInSecondaryRole",
                           "Sets the connection modes of an Availability Replica in secondary role.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SeedingMode",
                           "Specifies how the secondary replica will be initially seeded.\nAutomatic enables direct seeding. This method will seed the secondary replica over the network. This method does not require you to backup and restore a copy of the primary database on the replica.\nManual requires you to create a backup of the database on the primary replica and manually restore that backup on the secondary replica.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EndpointUrl",
                           "The endpoint URL.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ReadonlyRoutingConnectionUrl",
                           "Sets the read only routing connection url for the availability replica.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Enables piping from Get-DbaAgReplica.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Sets the properties for a replica to an availability group on a SQL Server instance.",
        "Name":  "Set-DbaAgReplica",
        "Links":  "https://dbatools.io/Set-DbaAgReplica",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eSet-DbaAgReplica -SqlInstance sql2016 -Replica sql2016 -AvailabilityGroup SharePoint -BackupPriority 5000\nSets the backup priority to 5000 for the sql2016 replica for the SharePoint availability group on sql2016\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaAgReplica -SqlInstance sql2016 | Out-GridView -Passthru | Set-DbaAgReplica -BackupPriority 5000\nSets the backup priority to 5000 for the selected availability groups.",
        "Syntax":  "Set-DbaAgReplica [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-AvailabilityGroup] \u003cString\u003e] [[-Replica] \u003cString\u003e] [[-AvailabilityMode] \u003cString\u003e] [[-FailoverMode] \u003cString\u003e] [[-BackupPriority] \u003cInt32\u003e] [[-ConnectionModeInPrimaryRole] \u003cString\u003e] [[-ConnectionModeInSecondaryRole] \u003cString\u003e] [[-SeedingMode] \u003cString\u003e] [[-EndpointUrl] \u003cString\u003e] [[-ReadonlyRoutingConnectionUrl] \u003cString\u003e] [[-InputObject] \u003cAvailabilityReplica\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Set-DbaAvailabilityGroup",
        "Description":  "Sets availability group properties on a SQL Server instance.",
        "Tags":  [
                     "AvailabilityGroup",
                     "HA",
                     "AG"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. Server version must be SQL Server version 2012 or higher.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the SqlInstance instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AvailabilityGroup",
                           "Only set specific availability group properties.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AllAvailabilityGroups",
                           "Set properties for all availability group on an instance.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "DtcSupportEnabled",
                           "Enables DtcSupport.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "ClusterType",
                           "Cluster type of the Availability Group. Only supported in SQL Server 2017 and above.\r\nOptions include: External, Wsfc or None.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AutomatedBackupPreference",
                           "Specifies how replicas in the primary role are treated in the evaluation to pick the desired replica to perform a backup.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "FailureConditionLevel",
                           "Specifies the different conditions that can trigger an automatic failover in Availability Group.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "HealthCheckTimeout",
                           "This setting used to specify the length of time, in milliseconds, that the SQL Server resource DLL should wait for information returned by the sp_server_diagnostics stored procedure before reporting \r\nthe Always On Failover Cluster Instance (FCI) as unresponsive.\nChanges that are made to the timeout settings are effective immediately and do not require a restart of the SQL Server resource.\nDefaults is 30000 (30 seconds).",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "BasicAvailabilityGroup",
                           "Indicates whether the availability group is basic. Basic availability groups like pumpkin spice and uggs.\nhttps://docs.microsoft.com/en-us/sql/database-engine/availability-groups/windows/basic-availability-groups-always-on-availability-groups",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "DatabaseHealthTrigger",
                           "Indicates whether the availability group triggers the database health.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "IsDistributedAvailabilityGroup",
                           "Indicates whether the availability group is distributed.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "InputObject",
                           "Enables piping from Get-DbaAvailabilityGroup.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Sets availability group properties on a SQL Server instance.",
        "Name":  "Set-DbaAvailabilityGroup",
        "Links":  "https://dbatools.io/Set-DbaAvailabilityGroup",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaAvailabilityGroup -SqlInstance sql2016 | Set-DbaAvailabilityGroup -DtcSupportEnabled\nEnables DTC for all availability groups on sql2016\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaAvailabilityGroup -SqlInstance sql2016 -AvailabilityGroup AG1 | Set-DbaAvailabilityGroup -DtcSupportEnabled:$false\nDisables DTC support for the availability group AG1\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eSet-DbaAvailabilityGroup -SqlInstance sql2016 -AvailabilityGroup AG1 -DtcSupportEnabled:$false\nDisables DTC support for the availability group AG1",
        "Syntax":  "Set-DbaAvailabilityGroup [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-AvailabilityGroup] \u003cString[]\u003e] [-AllAvailabilityGroups] [-DtcSupportEnabled] [[-ClusterType] \u003cString\u003e] [[-AutomatedBackupPreference] \u003cString\u003e] [[-FailureConditionLevel] \u003cString\u003e] [[-HealthCheckTimeout] \u003cInt32\u003e] [-BasicAvailabilityGroup] [-DatabaseHealthTrigger] [-IsDistributedAvailabilityGroup] [[-InputObject] \u003cAvailabilityGroup[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Set-DbaCmConnection",
        "Description":  "Configures a connection object for use in remote computer management.\nThis function will either create new records for computers that have no connection registered so far, or it will configure existing connections if already present.\n\nAs such it can be handy in making bulk-edits on connections or manually adjusting some settings.",
        "Tags":  [
                     "ComputerManagement",
                     "CIM"
                 ],
        "Params":  [
                       [
                           "ComputerName",
                           "The computer to build the connection object for.",
                           "",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "The credential to register.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "UseWindowsCredentials",
                           "Whether using the default windows credentials is legit.\r\nNot setting this will not exclude using windows credentials, but only not pre-confirm them as working.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "OverrideExplicitCredential",
                           "Setting this will enable the credential override.\r\nThe override will cause the system to ignore explicitly specified credentials, so long as known, good credentials are available.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "OverrideConnectionPolicy",
                           "Setting this will configure the connection policy override.\r\nBy default, global configurations enforce, which connection type is available at all and which is disabled.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "DisabledConnectionTypes",
                           "Explicitly disable connection types.\r\nThese types will then not be used for connecting to the computer.",
                           "",
                           false,
                           "false",
                           "None"
                       ],
                       [
                           "DisableBadCredentialCache",
                           "Will prevent the caching of credentials if set to true.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "DisableCimPersistence",
                           "Will prevent Cim-Sessions to be reused.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "DisableCredentialAutoRegister",
                           "Will prevent working credentials from being automatically cached",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableCredentialFailover",
                           "Will enable automatic failing over to known to work credentials, when using bad credentials.\r\nBy default, passing bad credentials will cause the Computer Management functions to interrupt with a warning (Or exception if in silent mode).",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WindowsCredentialsAreBad",
                           "Will prevent the windows credentials of the currently logged on user from being used for the remote connection.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "CimWinRMOptions",
                           "Specify a set of options to use when connecting to the target computer using CIM over WinRM.\r\nUse \u0027New-CimSessionOption\u0027 to create such an object.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "CimDCOMOptions",
                           "Specify a set of options to use when connecting to the target computer using CIM over DCOM.\r\nUse \u0027New-CimSessionOption\u0027 to create such an object.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AddBadCredential",
                           "Adds credentials to the bad credential cache.\r\nThese credentials will not be used when connecting to the target remote computer.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "RemoveBadCredential",
                           "Removes credentials from the bad credential cache.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ClearBadCredential",
                           "Clears the cache of credentials that didn\u0027t worked.\r\nWill be applied before adding entries to the credential cache.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "ClearCredential",
                           "Clears the cache of credentials that worked.\r\nWill be applied before adding entries to the credential cache.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "ResetCredential",
                           "Resets all credential-related caches:\r\n- Clears bad credential cache\r\n- Removes last working credential\r\n- Un-Confirms the windows credentials as working\r\n- Un-Confirms the windows credentials as not working\nAutomatically implies the parameters -ClearCredential and -ClearBadCredential. Using them together is redundant.\r\nWill be applied before adding entries to the credential cache.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "ResetConnectionStatus",
                           "Restores all connection status to default, as if no connection protocol had ever been tested.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "ResetConfiguration",
                           "Restores the configuration back to system default.\r\nConfiguration elements are the basic behavior controlling settings, such as whether to cache bad credentials, etc.\r\nThese can be configured globally using the dbatools configuration system and overridden locally on a per-connection basis.\r\nFor a list of all available settings, use \"Get-DbatoolsConfig -Module ComputerManagement\".",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Friedrich Weinmann (@FredWeinmann)",
        "Synopsis":  "Configures a connection object for use in remote computer management.",
        "Name":  "Set-DbaCmConnection",
        "Links":  "https://dbatools.io/set-DbaCmConnection",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaCmConnection sql2014 | Set-DbaCmConnection -ClearBadCredential -UseWindowsCredentials\nRetrieves the already existing connection to sql2014, removes the list of not working credentials and configures it to default to the credentials of the logged on user.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaCmConnection | Set-DbaCmConnection -RemoveBadCredential $cred\nRemoves the credentials stored in $cred from all connections\u0027 list of \"known to not work\" credentials.\r\nHandy to update changes in privilege.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaCmConnection | Export-Clixml .\\connections.xml\nPS C:\\\u003e Import-Clixml .\\connections.xml | Set-DbaCmConnection -ResetConfiguration\nAt first, the current cached connections are stored in an xml file. At a later time - possibly in the profile when starting the console again - those connections are imported again and applied again \r\nto the connection cache.\nIn this example, the configuration settings will also be reset, since after re-import those will be set to explicit, rather than deriving them from the global settings.\r\nIn many cases, using the default settings is desirable. For specific settings, use New-DbaCmConnection as part of the profile in order to explicitly configure a connection.",
        "Syntax":  "Set-DbaCmConnection [-ComputerName \u003cDbaCmConnectionParameter[]\u003e] [-Credential \u003cPSCredential\u003e] [-OverrideExplicitCredential] [-OverrideConnectionPolicy] [-DisabledConnectionTypes {None | CimRM | CimDCOM | Wmi | PowerShellRemoting}] [-DisableBadCredentialCache] [-DisableCimPersistence] [-DisableCredentialAutoRegister] [-EnableCredentialFailover] [-WindowsCredentialsAreBad] [-CimWinRMOptions \u003cWSManSessionOptions\u003e] [-CimDCOMOptions \u003cDComSessionOptions\u003e] [-AddBadCredential \u003cPSCredential[]\u003e] [-RemoveBadCredential \u003cPSCredential[]\u003e] [-ClearBadCredential] [-ClearCredential] [-ResetCredential] \r\n[-ResetConnectionStatus] [-ResetConfiguration] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nSet-DbaCmConnection [-ComputerName \u003cDbaCmConnectionParameter[]\u003e] [-UseWindowsCredentials] [-OverrideExplicitCredential] [-OverrideConnectionPolicy] [-DisabledConnectionTypes {None | CimRM | CimDCOM | Wmi | PowerShellRemoting}] [-DisableBadCredentialCache] [-DisableCimPersistence] [-DisableCredentialAutoRegister] [-EnableCredentialFailover] [-CimWinRMOptions \u003cWSManSessionOptions\u003e] [-CimDCOMOptions \u003cDComSessionOptions\u003e] [-AddBadCredential \u003cPSCredential[]\u003e] [-RemoveBadCredential \u003cPSCredential[]\u003e] [-ClearBadCredential] [-ClearCredential] [-ResetCredential] [-ResetConnectionStatus] \r\n[-ResetConfiguration] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Set-DbaDbCompatibility",
        "Description":  "Sets the current database compatibility level for all databases on a server or list of databases passed in to the function.",
        "Tags":  [
                     "Compatibility",
                     "Database"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "SqlCredential object used to connect to the SQL Server as a different user.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database or databases to process. If unspecified, all databases will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "TargetCompatibility",
                           "The target compatibility level version. This is an int and follows Microsoft\u0027s versioning:\n9 = SQL Server 2005\r\n10 = SQL Server 2008\r\n11 = SQL Server 2012\r\n12 = SQL Server 2014\r\n13 = SQL Server 2016\r\n14 = SQL Server 2017\r\n15 = SQL Server 2019",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "InputObject",
                           "A collection of databases (such as returned by Get-DbaDatabase)",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts for confirmation of every step. For example:\nAre you sure you want to perform this action?\r\nPerforming the operation \"Update database\" on target \"pubs on SQL2016\\VNEXT\".\r\n[Y] Yes  [A] Yes to All  [N] No  [L] No to All  [S] Suspend  [?] Help (default is \"Y\"):",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Garry Bargsley, http://blog.garrybargsley.com/",
        "Synopsis":  "Sets the compatibility level for SQL Server databases.",
        "Name":  "Set-DbaDbCompatibility",
        "Links":  "https://dbatools.io/Set-DbaDbCompatibility",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eSet-DbaDbCompatibility -SqlInstance localhost\\sql2017\nChanges database compatibility level for all user databases on server localhost\\sql2017 that have a Compatibility level that do not match\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eSet-DbaDbCompatibility -SqlInstance localhost\\sql2017 -TargetCompatibility 12\nChanges database compatibility level for all user databases on server localhost\\sql2017 to Version120\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eSet-DbaDbCompatibility -SqlInstance localhost\\sql2017 -Database Test -TargetCompatibility 12\nChanges database compatibility level for database Test on server localhost\\sql2017 to Version 120",
        "Syntax":  "Set-DbaDbCompatibility [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cString[]\u003e] [[-TargetCompatibility] \u003cInt32\u003e] [[-InputObject] \u003cDatabase[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Set-DbaDbCompression",
        "Description":  "This function sets the appropriate compression recommendation, determined either by using the Tiger Team\u0027s query or set to the CompressionType parameter.\n\nRemember Uptime is critical for the Tiger Team query, the longer uptime, the more accurate the analysis is.\nYou would probably be best if you utilized Get-DbaUptime first, before running this command.\n\nSet-DbaDbCompression script derived from GitHub and the tigertoolbox\n(https://github.com/Microsoft/tigertoolbox/tree/master/Evaluate-Compression-Gains)",
        "Tags":  [
                     "Compression",
                     "Table",
                     "Database"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process - this list is auto populated from the server. If unspecified, all databases will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "CompressionType",
                           "Control the compression type applied. Default is \u0027Recommended\u0027 which uses the Tiger Team query to use the most appropriate setting per object. Other option is to compress all objects to either Row or \r\nPage.",
                           "",
                           false,
                           "false",
                           "Recommended"
                       ],
                       [
                           "MaxRunTime",
                           "Will continue to alter tables and indexes for the given amount of minutes.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "PercentCompression",
                           "Will only work on the tables/indexes that have the calculated savings at and higher for the given number provided.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "InputObject",
                           "Takes the output of Test-DbaDbCompression as an object and applied compression based on those recommendations.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Jason Squires (@js_0505), [email protected]",
        "Synopsis":  "Sets tables and indexes with preferred compression setting.",
        "Name":  "Set-DbaDbCompression",
        "Links":  "https://dbatools.io/Set-DbaDbCompression",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eSet-DbaDbCompression -SqlInstance localhost -MaxRunTime 60 -PercentCompression 25\nSet the compression run time to 60 minutes and will start the compression of tables/indexes that have a difference of 25% or higher between current and recommended.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eSet-DbaDbCompression -SqlInstance ServerA -Database DBName -CompressionType Page\nUtilizes Page compression for all objects in DBName on ServerA with no time limit.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eSet-DbaDbCompression -SqlInstance ServerA -Database DBName -PercentCompression 25 | Out-GridView\nWill compress tables/indexes within the specified database that would show any % improvement with compression and with no time limit. The results will be piped into a nicely formatted GridView.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003e$testCompression = Test-DbaDbCompression -SqlInstance ServerA -Database DBName\nPS C:\\\u003e Set-DbaDbCompression -SqlInstance ServerA -Database DBName -InputObject $testCompression\nGets the compression suggestions from Test-DbaDbCompression into a variable, this can then be reviewed and passed into Set-DbaDbCompression.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003e$cred = Get-Credential sqladmin\nPS C:\\\u003e Set-DbaDbCompression -SqlInstance ServerA -ExcludeDatabase Database -SqlCredential $cred -MaxRunTime 60 -PercentCompression 25\nSet the compression run time to 60 minutes and will start the compression of tables/indexes for all databases except the specified excluded database. Only objects that have a difference of 25% or \r\nhigher between current and recommended will be compressed.\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003e$servers = \u0027Server1\u0027,\u0027Server2\u0027\nPS C:\\\u003e foreach ($svr in $servers) {\r\n\u003e\u003e Set-DbaDbCompression -SqlInstance $svr -MaxRunTime 60 -PercentCompression 25 | Export-Csv -Path C:\\temp\\CompressionAnalysisPAC.csv -Append\r\n\u003e\u003e }\nSet the compression run time to 60 minutes and will start the compression of tables/indexes across all listed servers that have a difference of 25% or higher between current and recommended. Output \r\nof command is exported to a csv.",
        "Syntax":  "Set-DbaDbCompression [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [[-CompressionType] \u003cObject\u003e] [[-MaxRunTime] \u003cInt32\u003e] [[-PercentCompression] \u003cInt32\u003e] [[-InputObject] \u003cObject\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Set-DbaDbMirror",
        "Description":  "Sets properties of database mirrors.",
        "Tags":  [
                     "Mirror",
                     "HA"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function\r\nto be executed against multiple SQL Server instances.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The target database.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Partner",
                           "Sets the partner fqdn.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Witness",
                           "Sets the witness fqdn.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SafetyLevel",
                           "Sets the mirroring safety level.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "State",
                           "Sets the mirror state.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Allows piping from Get-DbaDatabase.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Sets properties of database mirrors.",
        "Name":  "Set-DbaDbMirror",
        "Links":  "https://dbatools.io/Set-DbaDbMirror",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eSet-DbaDbMirror -SqlInstance sql2005 -Database dbatools -Partner TCP://SQL2008.ad.local:5374\nPrompts for confirmation then sets the partner to TCP://SQL2008.ad.local:5374 for the database \"dbtools\"\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eSet-DbaDbMirror -SqlInstance sql2005 -Database dbatools -Witness TCP://SQL2012.ad.local:5502 -Confirm:$false\nDoes not prompt for confirmation and sets the witness to TCP://SQL2012.ad.local:5502 for the database \"dbtools\"\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaDatabase -SqlInstance sql2005 | Out-GridView -PassThru | Set-DbaDbMirror -SafetyLevel Full -Confirm:$false\nSets the safety level to Full for databases selected from a grid view. Does not prompt for confirmation.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eSet-DbaDbMirror -SqlInstance sql2005 -Database dbatools -State Suspend -Confirm:$false\nDoes not prompt for confirmation and sets the state to suspend for the database \"dbtools\"",
        "Syntax":  "Set-DbaDbMirror [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cString[]\u003e] [[-Partner] \u003cString\u003e] [[-Witness] \u003cString\u003e] [[-SafetyLevel] \u003cString\u003e] [[-State] \u003cString\u003e] [[-InputObject] \u003cDatabase[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Set-DbaDbOwner",
        "Description":  "This function will alter database ownership to match a specified login if their current owner does not match the target login. By default, the target login will be \u0027sa\u0027, but the function will allow the user to specify a different login for  ownership. The user can also apply this to all databases or only to a select list of databases (passed as either a comma separated list or a string array).\n\nBest Practice reference: http://weblogs.sqlteam.com/dang/archive/2008/01/13/Database-Owner-Troubles.aspx",
        "Tags":  [
                     "Database",
                     "Owner",
                     "DbOwner"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Specifies the database(s) to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "Specifies the database(s) to exclude from processing. Options for this list are auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "TargetLogin",
                           "Specifies the login that you wish check for ownership. This defaults to \u0027sa\u0027 or the sysadmin name if sa was renamed. This must be a valid security principal which exists on the target server.",
                           "Login",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Set-DbaDatabaseOwner",
        "Author":  "Michael Fal (@Mike_Fal), http://mikefal.net",
        "Synopsis":  "Sets database owners with a desired login if databases do not match that owner.",
        "Name":  "Set-DbaDbOwner",
        "Links":  "https://dbatools.io/Set-DbaDbOwner",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eSet-DbaDbOwner -SqlInstance localhost\nSets database owner to \u0027sa\u0027 on all databases where the owner does not match \u0027sa\u0027.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eSet-DbaDbOwner -SqlInstance localhost -TargetLogin DOMAIN\\account\nSets the database owner to DOMAIN\\account on all databases where the owner does not match DOMAIN\\account.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eSet-DbaDbOwner -SqlInstance sqlserver -Database db1, db2\nSets database owner to \u0027sa\u0027 on the db1 and db2 databases if their current owner does not match \u0027sa\u0027.",
        "Syntax":  "Set-DbaDbOwner [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [[-TargetLogin] \u003cString\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Set-DbaDbQueryStoreOption",
        "Description":  "Configure Query Store settings for a specific or multiple databases.",
        "Tags":  "QueryStore",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "SqlCredential object used to connect to the SQL Server as a different user.",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AllDatabases",
                           "Run command against all user databases",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "State",
                           "Set the state of the Query Store. Valid options are \"ReadWrite\", \"ReadOnly\" and \"Off\".",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "FlushInterval",
                           "Set the flush to disk interval of the Query Store in seconds.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "CollectionInterval",
                           "Set the runtime statistics collection interval of the Query Store in minutes.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "MaxSize",
                           "Set the maximum size of the Query Store in MB.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "CaptureMode",
                           "Set the query capture mode of the Query Store. Valid options are \"Auto\" and \"All\".",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "CleanupMode",
                           "Set the query cleanup mode policy. Valid options are \"Auto\" and \"Off\".",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "StaleQueryThreshold",
                           "Set the stale query threshold in days.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts for confirmation of every step. For example:\nAre you sure you want to perform this action?\r\nPerforming the operation \"Changing Desired State\" on target \"pubs on SQL2016\\VNEXT\".\r\n[Y] Yes  [A] Yes to All  [N] No  [L] No to All  [S] Suspend  [?] Help (default is \"Y\"):",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Set-DbaDbQueryStoreOptions,Set-DbaQueryStoreConfig",
        "Author":  "Enrico van de Laar (@evdlaar)",
        "Synopsis":  "Configure Query Store settings for a specific or multiple databases.",
        "Name":  "Set-DbaDbQueryStoreOption",
        "Links":  "https://dbatools.io/Set-DbaQueryStoreOptions",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eSet-DbaDbQueryStoreOption -SqlInstance ServerA\\SQL -State ReadWrite -FlushInterval 600 -CollectionInterval 10 -MaxSize 100 -CaptureMode All -CleanupMode Auto -StaleQueryThreshold 100 \r\n-AllDatabases\nConfigure the Query Store settings for all user databases in the ServerA\\SQL Instance.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eSet-DbaDbQueryStoreOption -SqlInstance ServerA\\SQL -FlushInterval 600\nOnly configure the FlushInterval setting for all Query Store databases in the ServerA\\SQL Instance.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eSet-DbaDbQueryStoreOption -SqlInstance ServerA\\SQL -Database AdventureWorks -State ReadWrite -FlushInterval 600 -CollectionInterval 10 -MaxSize 100 -CaptureMode all -CleanupMode Auto \r\n-StaleQueryThreshold 100\nConfigure the Query Store settings for the AdventureWorks database in the ServerA\\SQL Instance.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eSet-DbaDbQueryStoreOption -SqlInstance ServerA\\SQL -Exclude AdventureWorks -State ReadWrite -FlushInterval 600 -CollectionInterval 10 -MaxSize 100 -CaptureMode all -CleanupMode Auto \r\n-StaleQueryThreshold 100\nConfigure the Query Store settings for all user databases except the AdventureWorks database in the ServerA\\SQL Instance.",
        "Syntax":  "Set-DbaDbQueryStoreOption [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [-AllDatabases] [[-State] \u003cString[]\u003e] [[-FlushInterval] \u003cInt64\u003e] [[-CollectionInterval] \u003cInt64\u003e] [[-MaxSize] \u003cInt64\u003e] [[-CaptureMode] \u003cString[]\u003e] [[-CleanupMode] \u003cString[]\u003e] [[-StaleQueryThreshold] \u003cInt64\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Set-DbaDbRecoveryModel",
        "Description":  "Set-DbaDbRecoveryModel sets the Recovery Model for user databases.",
        "Tags":  [
                     "RecoveryModel",
                     "Database"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "RecoveryModel",
                           "Recovery Model to be set. Valid options are \u0027Simple\u0027, \u0027Full\u0027, \u0027BulkLogged\u0027\nDetails about the recovery models can be found here:\r\nhttps://docs.microsoft.com/en-us/sql/relational-databases/backup-restore/recovery-models-sql-server",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process - this list is auto-populated from the server. if unspecified, all databases will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AllDatabases",
                           "This is a parameter that was included for safety, so you don\u0027t accidentally set options on all databases without specifying",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "InputObject",
                           "A collection of databases (such as returned by Get-DbaDatabase)",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts for confirmation. For example:\nAre you sure you want to perform this action?\r\nPerforming the operation \"ALTER DATABASE [model] SET RECOVERY Full\" on target \"[model] on WERES14224\".\r\n[Y] Yes  [A] Yes to All  [N] No  [L] No to All  [S] Suspend  [?] Help (default is \"Y\"):",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Viorel Ciucu (@viorelciucu), https://www.cviorel.com",
        "Synopsis":  "Set-DbaDbRecoveryModel sets the Recovery Model.",
        "Name":  "Set-DbaDbRecoveryModel",
        "Links":  "https://dbatools.io/Set-DbaDbRecoveryModel",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eSet-DbaDbRecoveryModel -SqlInstance sql2014 -RecoveryModel BulkLogged -Database model -Confirm:$true -Verbose\nSets the Recovery Model to BulkLogged for database [model] on SQL Server instance sql2014. User is requested to confirm the action.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDatabase -SqlInstance sql2014 -Database TestDB | Set-DbaDbRecoveryModel -RecoveryModel Simple  -Confirm:$false\nSets the Recovery Model to Simple for database [TestDB] on SQL Server instance sql2014. Confirmation is not required.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eSet-DbaDbRecoveryModel -SqlInstance sql2014 -RecoveryModel Simple -Database TestDB -Confirm:$false\nSets the Recovery Model to Simple for database [TestDB] on SQL Server instance sql2014. Confirmation is not required.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eSet-DbaDbRecoveryModel -SqlInstance sql2014 -RecoveryModel Simple -AllDatabases -Confirm:$false\nSets the Recovery Model to Simple for ALL uses databases MODEL database on SQL Server instance sql2014. Runs without asking for confirmation.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eSet-DbaDbRecoveryModel -SqlInstance sql2014 -RecoveryModel BulkLogged -Database TestDB1, TestDB2 -Confirm:$false -Verbose\nSets the Recovery Model to BulkLogged for [TestDB1] and [TestDB2] databases on SQL Server instance sql2014. Runs without asking for confirmation.",
        "Syntax":  "Set-DbaDbRecoveryModel [-SqlCredential \u003cPSCredential\u003e] -RecoveryModel \u003cString\u003e [-Database \u003cObject[]\u003e] [-ExcludeDatabase \u003cObject[]\u003e] [-AllDatabases] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nSet-DbaDbRecoveryModel -SqlInstance \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] -RecoveryModel \u003cString\u003e [-Database \u003cObject[]\u003e] [-ExcludeDatabase \u003cObject[]\u003e] [-AllDatabases] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nSet-DbaDbRecoveryModel [-SqlCredential \u003cPSCredential\u003e] -RecoveryModel \u003cString\u003e [-Database \u003cObject[]\u003e] [-ExcludeDatabase \u003cObject[]\u003e] [-AllDatabases] [-EnableException] -InputObject \u003cDatabase[]\u003e [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Set-DbaDbState",
        "Description":  "Sets some common \"states\" on databases:\n- \"RW\" options (ReadOnly, ReadWrite)\n- \"Status\" options (Online, Offline, Emergency, plus a special \"Detached\")\n- \"Access\" options (SingleUser, RestrictedUser, MultiUser)\n\nReturns an object with SqlInstance, Database, RW, Status, Access, Notes\n\nNotes gets filled when something went wrong setting the state",
        "Tags":  [
                     "Database",
                     "State"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByPropertyName)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Credential object used to connect to the SQL Server as a different user",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process - this list is auto-populated from the server. if unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AllDatabases",
                           "This is a parameter that was included for safety, so you don\u0027t accidentally set options on all databases without specifying",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "ReadOnly",
                           "RW Option : Sets the database as READ_ONLY",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "ReadWrite",
                           "RW Option : Sets the database as READ_WRITE",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Online",
                           "Status Option : Sets the database as ONLINE",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Offline",
                           "Status Option : Sets the database as OFFLINE",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Emergency",
                           "Status Option : Sets the database as EMERGENCY",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Detached",
                           "Status Option : Detaches the database",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "SingleUser",
                           "Access Option : Sets the database as SINGLE_USER",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "RestrictedUser",
                           "Access Option : Sets the database as RESTRICTED_USER",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "MultiUser",
                           "Access Option : Sets the database as MULTI_USER",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Force",
                           "For most options, this translates to instantly rolling back any open transactions\r\nthat may be stopping the process.\r\nFor -Detached it is required to break mirroring and Availability Groups",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "InputObject",
                           "Accepts piped database objects",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Set-DbaDatabaseState",
        "Author":  "Simone Bizzotto (@niphold)",
        "Synopsis":  "Sets various options for databases, hereby called \"states\"",
        "Name":  "Set-DbaDbState",
        "Links":  "https://dbatools.io/Set-DbaDbState",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eSet-DbaDbState -SqlInstance sqlserver2014a -Database HR -Offline\nSets the HR database as OFFLINE\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eSet-DbaDbState -SqlInstance sqlserver2014a -AllDatabases -Exclude HR -ReadOnly -Force\nSets all databases of the sqlserver2014a instance, except for HR, as READ_ONLY\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaDbState -SqlInstance sql2016 | Where-Object Status -eq \u0027Offline\u0027 | Set-DbaDbState -Online\nFinds all offline databases and sets them to online\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eSet-DbaDbState -SqlInstance sqlserver2014a -Database HR -SingleUser\nSets the HR database as SINGLE_USER\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eSet-DbaDbState -SqlInstance sqlserver2014a -Database HR -SingleUser -Force\nSets the HR database as SINGLE_USER, dropping all other connections (and rolling back open transactions)\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eGet-DbaDatabase -SqlInstance sqlserver2014a -Database HR | Set-DbaDbState -SingleUser -Force\nGets the databases from Get-DbaDatabase, and sets them as SINGLE_USER, dropping all other connections (and rolling back open transactions)",
        "Syntax":  "Set-DbaDbState [-SqlCredential \u003cPSCredential\u003e] [-Database \u003cObject[]\u003e] [-ExcludeDatabase \u003cObject[]\u003e] [-AllDatabases] [-ReadOnly] [-ReadWrite] [-Online] [-Offline] [-Emergency] [-Detached] [-SingleUser] [-RestrictedUser] [-MultiUser] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nSet-DbaDbState -SqlInstance \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Database \u003cObject[]\u003e] [-ExcludeDatabase \u003cObject[]\u003e] [-AllDatabases] [-ReadOnly] [-ReadWrite] [-Online] [-Offline] [-Emergency] [-Detached] [-SingleUser] [-RestrictedUser] [-MultiUser] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nSet-DbaDbState [-SqlCredential \u003cPSCredential\u003e] [-Database \u003cObject[]\u003e] [-ExcludeDatabase \u003cObject[]\u003e] [-AllDatabases] [-ReadOnly] [-ReadWrite] [-Online] [-Offline] [-Emergency] [-Detached] [-SingleUser] [-RestrictedUser] [-MultiUser] [-Force] [-EnableException] -InputObject \u003cPSObject[]\u003e [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Set-DbaEndpoint",
        "Description":  "Sets endpoint properties on a SQL Server instance.",
        "Tags":  "Endpoint",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EndPoint",
                           "Only set specific endpoint properties.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Owner",
                           "Change the endpoint owner.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Type",
                           "Change the endpoint type. Options: DatabaseMirroring, ServiceBroker, Soap, TSql",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AllEndpoints",
                           "Set all endpoint properties on an instance.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "InputObject",
                           "Enables piping from Get-Endpoint.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Sets endpoint properties on a SQL Server instance.",
        "Name":  "Set-DbaEndpoint",
        "Links":  "https://dbatools.io/Set-DbaEndpoint",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eSet-DbaEndpoint -SqlInstance sql2016 -AllEndpoints -Owner sa\nSets all endpoint owners to sa on sql2016\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaEndpoint -SqlInstance sql2016 -Endpoint ep1 | Set-DbaEndpoint -Type TSql\nChanges the endpoint type to tsql on endpoint ep1",
        "Syntax":  "Set-DbaEndpoint [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-EndPoint] \u003cString[]\u003e] [[-Owner] \u003cString\u003e] [[-Type] \u003cString\u003e] [-AllEndpoints] [[-InputObject] \u003cEndpoint[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Set-DbaErrorLogConfig",
        "Description":  "Sets the number of log files configured on all versions, and size in KB in SQL Server 2012+ and above.\n\nTo set the Path to the ErrorLog, use Set-DbaStartupParameter -ErrorLog. Note that this command requires\nremote, administrative access to the Windows/WMI server, similar to SQL Configuration Manager.",
        "Tags":  [
                     "Instance",
                     "ErrorLog"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances",
                           "",
                           true,
                           "true (ByPropertyName)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "LogCount",
                           "Integer value between 6 and 99 for setting the number of error log files to keep for SQL Server instance.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "LogSize",
                           "Integer value for the size in KB that you want the error log file to grow. This is feature only in SQL Server 2012 and higher. When the file reaches that limit SQL Server will roll the error log over.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Shawn Melton (@wsmelton), https://wsmelton.github.com",
        "Synopsis":  "Set the configuration for the ErrorLog on a given SQL Server instance",
        "Name":  "Set-DbaErrorLogConfig",
        "Links":  "https://dbatools.io/Set-DbaErrorLogConfig",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eSet-DbaErrorLogConfig -SqlInstance sql2017,sql2014 -LogCount 25\nSets the number of error log files to 25 on sql2017 and sql2014\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eSet-DbaErrorLogConfig -SqlInstance sql2014 -LogSize 102400\nSets the size of the error log file, before it rolls over, to 102400 KB (100 MB) on sql2014\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eSet-DbaErrorLogConfig -SqlInstance sql2012 -LogCount 25 -LogSize 500\nSets the number of error log files to 25 and size before it will roll over to 500 KB on sql2012",
        "Syntax":  "Set-DbaErrorLogConfig [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-LogCount] \u003cInt32\u003e] [[-LogSize] \u003cInt32\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Set-DbaLogin",
        "Description":  "Set-DbaLogin will enable you to change the password, unlock, rename, disable or enable, deny or grant login privileges to the login. It\u0027s also possible to add or remove server roles from the login.",
        "Tags":  "Login",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2000 or greater.",
                           "ServerInstance,SqlServer",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Login",
                           "The login that needs to be changed",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SecurePassword",
                           "The new password for the login This can be either a credential or a secure string.",
                           "Password",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Unlock",
                           "Switch to unlock an account. This will only be used in conjunction with the -SecurePassword parameter.\r\nThe default is false.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "MustChange",
                           "Does the user need to change his/her password. This will only be used in conjunction with the -SecurePassword parameter.\r\nThe default is false.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "NewName",
                           "The new name for the login.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Disable",
                           "Disable the login",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Enable",
                           "Enable the login",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "DenyLogin",
                           "Deny access to SQL Server",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "GrantLogin",
                           "Grant access to SQL Server",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "PasswordPolicyEnforced",
                           "Should the password policy be enforced.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "AddRole",
                           "Add one or more server roles to the login\r\nThe following roles can be used \"bulkadmin\", \"dbcreator\", \"diskadmin\", \"processadmin\", \"public\", \"securityadmin\", \"serveradmin\", \"setupadmin\", \"sysadmin\".",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "RemoveRole",
                           "Remove one or more server roles to the login\r\nThe following roles can be used \"bulkadmin\", \"dbcreator\", \"diskadmin\", \"processadmin\", \"public\", \"securityadmin\", \"serveradmin\", \"setupadmin\", \"sysadmin\".",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Allows logins to be piped in from Get-DbaLogin",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Sander Stad (@sqlstad), sqlstad.nl",
        "Synopsis":  "Set-DbaLogin makes it possible to make changes to one or more logins.",
        "Name":  "Set-DbaLogin",
        "Links":  "https://dbatools.io/Set-DbaLogin",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003e$SecurePassword = ConvertTo-SecureString \"PlainTextPassword\" -AsPlainText -Force\nPS C:\\\u003e $cred = New-Object System.Management.Automation.PSCredential (\"username\", $SecurePassword)\r\nPS C:\\\u003e Set-DbaLogin -SqlInstance sql1 -Login login1 -SecurePassword $cred -Unlock -MustChange\nSet the new password for login1 using a credential, unlock the account and set the option\r\nthat the user must change password at next logon.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eSet-DbaLogin -SqlInstance sql1 -Login login1 -Enable\nEnable the login\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eSet-DbaLogin -SqlInstance sql1 -Login login1, login2, login3, login4 -Enable\nEnable multiple logins\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eSet-DbaLogin -SqlInstance sql1, sql2, sql3 -Login login1, login2, login3, login4 -Enable\nEnable multiple logins on multiple instances\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eSet-DbaLogin -SqlInstance sql1 -Login login1 -Disable\nDisable the login\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eSet-DbaLogin -SqlInstance sql1 -Login login1 -DenyLogin\nDeny the login to connect to the instance\n-------------------------- EXAMPLE 7 --------------------------\nPS C:\\\u003eSet-DbaLogin -SqlInstance sql1 -Login login1 -GrantLogin\nGrant the login to connect to the instance\n-------------------------- EXAMPLE 8 --------------------------\nPS C:\\\u003eSet-DbaLogin -SqlInstance sql1 -Login login1 -PasswordPolicyEnforced\nEnforces the password policy on a login\n-------------------------- EXAMPLE 9 --------------------------\nPS C:\\\u003eSet-DbaLogin -SqlInstance sql1 -Login login1 -PasswordPolicyEnforced:$false\nDisables enforcement of the password policy on a login\n-------------------------- EXAMPLE 10 --------------------------\nPS C:\\\u003eSet-DbaLogin -SqlInstance sql1 -Login test -AddRole serveradmin\nAdd the server role \"serveradmin\" to the login\n-------------------------- EXAMPLE 11 --------------------------\nPS C:\\\u003eSet-DbaLogin -SqlInstance sql1 -Login test -RemoveRole bulkadmin\nRemove the server role \"bulkadmin\" to the login\n-------------------------- EXAMPLE 12 --------------------------\nPS C:\\\u003e$login = Get-DbaLogin -SqlInstance sql1 -Login test\nPS C:\\\u003e $login | Set-DbaLogin -Disable\nDisable the login from the pipeline",
        "Syntax":  "Set-DbaLogin [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Login] \u003cString[]\u003e] [[-SecurePassword] \u003cObject\u003e] [-Unlock] [-MustChange] [[-NewName] \u003cString\u003e] [-Disable] [-Enable] [-DenyLogin] [-GrantLogin] [-PasswordPolicyEnforced] [[-AddRole] \u003cString[]\u003e] [[-RemoveRole] \u003cString[]\u003e] [[-InputObject] \u003cLogin[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Set-DbaMaxDop",
        "Description":  "Uses the Test-DbaMaxDop command to get the recommended value if -MaxDop parameter is not specified.\n\nThese are just general recommendations for SQL Server and are a good starting point for setting the \"max degree of parallelism\" option.\n\nYou can set MaxDop database scoped configurations if the server is version 2016 or higher",
        "Tags":  [
                     "MaxDop",
                     "SpConfigure"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. Defaults to localhost.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Specifies one or more databases to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "Specifies one or more databases to exclude from processing. Options for this list are auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "MaxDop",
                           "Specifies the Max DOP value to set.",
                           "",
                           false,
                           "false",
                           "-1"
                       ],
                       [
                           "InputObject",
                           "If Test-SqlMaxDop has been executed prior to this function, the results may be passed in via this parameter.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "AllDatabases",
                           "If this switch is enabled, Max DOP will be set on all databases. This switch is only useful on SQL Server 2016 and higher.",
                           "All",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the cmdlet runs. The cmdlet is not run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before running the cmdlet.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Claudio Silva (@claudioessilva)",
        "Synopsis":  "Sets SQL Server maximum degree of parallelism (Max DOP), then displays information relating to SQL Server Max DOP configuration settings. Works on SQL Server 2005 and higher.",
        "Name":  "Set-DbaMaxDop",
        "Links":  "https://dbatools.io/Set-DbaMaxDop",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eSet-DbaMaxDop -SqlInstance sql2008, sql2012\nSets Max DOP to the recommended value for servers sql2008 and sql2012.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eSet-DbaMaxDop -SqlInstance sql2014 -MaxDop 4\nSets Max DOP to 4 for server sql2014.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eTest-DbaMaxDop -SqlInstance sql2008 | Set-DbaMaxDop\nGets the recommended Max DOP from Test-DbaMaxDop and applies it to to sql2008.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eSet-DbaMaxDop -SqlInstance sql2016 -Database db1\nSet recommended Max DOP for database db1 on server sql2016.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eSet-DbaMaxDop -SqlInstance sql2016 -AllDatabases\nSet recommended Max DOP for all databases on server sql2016.",
        "Syntax":  "Set-DbaMaxDop [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Database \u003cObject[]\u003e] [-ExcludeDatabase \u003cObject[]\u003e] [-MaxDop \u003cInt32\u003e] [-InputObject \u003cPSObject\u003e] [-AllDatabases] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Set-DbaMaxMemory",
        "Description":  "Sets SQL Server max memory then displays information relating to SQL Server Max Memory configuration settings.\n\nInspired by Jonathan Kehayias\u0027s post about SQL Server Max memory (http://bit.ly/sqlmemcalc), this uses a formula to\ndetermine the default optimum RAM to use, then sets the SQL max value to that number.\n\nJonathan notes that the formula used provides a *general recommendation* that doesn\u0027t account for everything that may\nbe going on in your specific environment.",
        "Tags":  [
                     "MaxMemory",
                     "Memory"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Max",
                           "Specifies the max megabytes (MB)",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "InputObject",
                           "A InputObject returned by Test-DbaMaxMemory",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the cmdlet runs. The cmdlet is not run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before running the cmdlet.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Set-SqlMaxMemory",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Sets SQL Server \u0027Max Server Memory\u0027 configuration setting to a new value then displays information this setting.",
        "Name":  "Set-DbaMaxMemory",
        "Links":  "https://dbatools.io/Set-DbaMaxMemory",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eSet-DbaMaxMemory sqlserver1\nSet max memory to the recommended on just one server named \"sqlserver1\"\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eSet-DbaMaxMemory -SqlInstance sqlserver1 -Max 2048\nExplicitly set max memory to 2048 on just one server, \"sqlserver1\"\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaCmsRegServer -SqlInstance sqlserver | Test-DbaMaxMemory | Where-Object { $_.MaxValue -gt $_.Total } | Set-DbaMaxMemory\nFind all servers in SQL Server Central Management Server that have Max SQL memory set to higher than the total memory\r\nof the server (think 2147483647), then pipe those to Set-DbaMaxMemory and use the default recommendation.",
        "Syntax":  "Set-DbaMaxMemory [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Max] \u003cInt32\u003e] [[-InputObject] \u003cPSObject[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Set-DbaNetworkCertificate",
        "Description":  "Sets the network certificate for SQL Server instance. This setting is found in Configuration Manager.\n\nThis command also grants read permissions for the service account on the certificate\u0027s private key.\n\nReferences:\nhttp://sqlmag.com/sql-server/7-steps-ssl-encryption\nhttps://azurebi.jppp.org/2016/01/23/using-lets-encrypt-certificates-for-secure-sql-server-connections/\nhttps://blogs.msdn.microsoft.com/sqlserverfaq/2016/09/26/creating-and-registering-ssl-certificates/",
        "Tags":  "Certificate",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. Defaults to localhost.",
                           "ServerInstance,SqlServer,ComputerName",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Allows you to login to the computer (not sql instance) using alternative credentials.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Certificate",
                           "The target certificate object",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Thumbprint",
                           "The thumbprint of the target certificate",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Sets the network certificate for SQL Server instance",
        "Name":  "Set-DbaNetworkCertificate",
        "Links":  "https://dbatools.io/Set-DbaNetworkCertificate",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eNew-DbaComputerCertificate | Set-DbaNetworkCertificate -SqlInstance localhost\\SQL2008R2SP2\nCreates and imports a new certificate signed by an Active Directory CA on localhost then sets the network certificate for the SQL2008R2SP2 to that newly created certificate.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eSet-DbaNetworkCertificate -SqlInstance sql1\\SQL2008R2SP2 -Thumbprint 1223FB1ACBCA44D3EE9640F81B6BA14A92F3D6E2\nSets the network certificate for the SQL2008R2SP2 instance to the certificate with the thumbprint of 1223FB1ACBCA44D3EE9640F81B6BA14A92F3D6E2 in LocalMachine\\My on sql1",
        "Syntax":  "Set-DbaNetworkCertificate [-SqlInstance \u003cDbaInstanceParameter[]\u003e] [-Credential \u003cPSCredential\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nSet-DbaNetworkCertificate [-SqlInstance \u003cDbaInstanceParameter[]\u003e] [-Credential \u003cPSCredential\u003e] -Certificate \u003cX509Certificate2\u003e [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nSet-DbaNetworkCertificate [-SqlInstance \u003cDbaInstanceParameter[]\u003e] [-Credential \u003cPSCredential\u003e] -Thumbprint \u003cString\u003e [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Set-DbaPowerPlan",
        "Description":  "Sets the SQL Server OS\u0027s Power Plan. Defaults to High Performance which is best practice.\n\nIf your organization uses a custom power plan that is considered best practice, specify -CustomPowerPlan.\n\nReferences:\nhttps://support.microsoft.com/en-us/kb/2207548\nhttp://www.sqlskills.com/blogs/glenn/windows-power-plan-effects-on-newer-intel-processors/",
        "Tags":  [
                     "PowerPlan",
                     "OS",
                     "Configure"
                 ],
        "Params":  [
                       [
                           "ComputerName",
                           "The server(s) to set the Power Plan on.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Credential",
                           "Specifies a PSCredential object to use in authenticating to the server(s), instead of the current user account.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "PowerPlan",
                           "Specifies the Power Plan that you wish to use. Valid options for this match the Windows default Power Plans of \"Power Saver\", \"Balanced\", and \"High Performance\".",
                           "",
                           false,
                           "false",
                           "High Performance"
                       ],
                       [
                           "CustomPowerPlan",
                           "Specifies the name of a custom Power Plan to use.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Enables piping from Get-DbaPowerPlan",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Sets the SQL Server OS\u0027s Power Plan.",
        "Name":  "Set-DbaPowerPlan",
        "Links":  "https://dbatools.io/Set-DbaPowerPlan",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eSet-DbaPowerPlan -ComputerName sql2017\nSets the Power Plan to High Performance. Skips it if its already set.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e\u0027Server1\u0027, \u0027Server2\u0027 | Set-DbaPowerPlan -PowerPlan Balanced\nSets the Power Plan to Balanced for Server1 and Server2. Skips it if its already set.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003e$cred = Get-Credential \u0027Domain\\User\u0027\nPS C:\\\u003e Set-DbaPowerPlan -ComputerName sql2017 -Credential $cred\nConnects using alternative Windows credential and sets the Power Plan to High Performance. Skips it if its already set.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eSet-DbaPowerPlan -ComputerName sqlcluster -CustomPowerPlan \u0027Maximum Performance\u0027\nSets the Power Plan to the custom power plan called \"Maximum Performance\". Skips it if its already set.",
        "Syntax":  "Set-DbaPowerPlan [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [[-PowerPlan] \u003cString\u003e] [[-CustomPowerPlan] \u003cString\u003e] [[-InputObject] \u003cPSObject\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Set-DbaPrivilege",
        "Description":  "Adds the SQL Service account to local privileges \u0027Lock Pages in Memory\u0027, \u0027Instant File Initialization\u0027, \u0027Logon as Batch\u0027 on one or more computers.\n\nRequires Local Admin rights on destination computer(s).",
        "Tags":  "Privilege",
        "Params":  [
                       [
                           "ComputerName",
                           "The target SQL Server instance or instances.",
                           "cn,host,Server",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Credential object used to connect to the computer as a different user.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Type",
                           "Use this to choose the privilege(s) to which you want to add the SQL Service account.\r\nAccepts \u0027IFI\u0027, \u0027LPIM\u0027 and/or \u0027BatchLogon\u0027 for local privileges \u0027Instant File Initialization\u0027, \u0027Lock Pages in Memory\u0027 and \u0027Logon as Batch\u0027.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Klaas Vandenberghe ( @PowerDBAKlaas )",
        "Synopsis":  "Adds the SQL Service account to local privileges on one or more computers.",
        "Name":  "Set-DbaPrivilege",
        "Links":  "https://dbatools.io/Set-DbaPrivilege",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eSet-DbaPrivilege -ComputerName sqlserver2014a -Type LPIM,IFI\nAdds the SQL Service account(s) on computer sqlserver2014a to the local privileges \u0027SeManageVolumePrivilege\u0027 and \u0027SeLockMemoryPrivilege\u0027.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e\u0027sql1\u0027,\u0027sql2\u0027,\u0027sql3\u0027 | Set-DbaPrivilege -Type IFI\nAdds the SQL Service account(s) on computers sql1, sql2 and sql3 to the local privilege \u0027SeManageVolumePrivilege\u0027.",
        "Syntax":  "Set-DbaPrivilege [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [-Type] \u003cString[]\u003e [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Set-DbaSpConfigure",
        "Description":  "This function changes the configured value for sp_configure settings. If the setting is dynamic this setting will be used, otherwise the user will be warned that a restart of SQL is required.\nThis is designed to be safe and will not allow for configurations to be set outside of the defined configuration min and max values.\nWhile it is possible to set below the min, or above the max this can cause serious problems with SQL Server (including startup failures), and so is not permitted.",
        "Tags":  "SpConfigure",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a\r\ncollection and receive pipeline input",
                           "ServerInstance,SqlServer",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Value",
                           "The new value for the configuration",
                           "NewValue,NewConfig",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "Name",
                           "The name of the configuration to be set -- Configs is auto-populated for tabbing convenience.",
                           "Config,ConfigName",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Piped objects from Get-DbaSpConfigure",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Nic Cain, https://sirsql.net/",
        "Synopsis":  "Changes the server level system configuration (sys.configuration/sp_configure) value for a given configuration",
        "Name":  "Set-DbaSpConfigure",
        "Links":  "https://dbatools.io/Set-DbaSpConfigure",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eSet-DbaSpConfigure -SqlInstance localhost -Name ScanForStartupProcedures -Value 1\nAdjusts the Scan for startup stored procedures configuration value to 1 and notifies the user that this requires a SQL restart to take effect\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaSpConfigure -SqlInstance sql2017, sql2014 -Name XPCmdShellEnabled, IsSqlClrEnabled | Set-DbaSpConfigure -Value $false\nSets the values for XPCmdShellEnabled and IsSqlClrEnabled on sql2017 and sql2014 to False\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eSet-DbaSpConfigure -SqlInstance localhost -Name XPCmdShellEnabled -Value 1\nAdjusts the xp_cmdshell configuration value to 1.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eSet-DbaSpConfigure -SqlInstance localhost -Name XPCmdShellEnabled -Value 1 -WhatIf\nReturns information on the action that would be performed. No actual change will be made.",
        "Syntax":  "Set-DbaSpConfigure [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Value] \u003cInt32\u003e] [[-Name] \u003cString[]\u003e] [[-InputObject] \u003cObject[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Set-DbaSpn",
        "Description":  "This function will connect to Active Directory and search for an account. If the account is found, it will attempt to add an SPN. Once the SPN is added, the function will also set delegation to that service, unless -NoDelegation is specified. In order to run this function, the credential you provide must have write access to Active Directory.\n\nNote: This function supports -WhatIf",
        "Tags":  "SPN",
        "Params":  [
                       [
                           "SPN",
                           "The SPN you want to add",
                           "RequiredSPN",
                           true,
                           "true (ByPropertyName)",
                           ""
                       ],
                       [
                           "ServiceAccount",
                           "The account you want the SPN added to",
                           "InstanceServiceAccount,AccountName",
                           true,
                           "true (ByPropertyName)",
                           ""
                       ],
                       [
                           "Credential",
                           "The credential you want to use to connect to Active Directory to make the changes",
                           "",
                           false,
                           "true (ByPropertyName)",
                           ""
                       ],
                       [
                           "NoDelegation",
                           "Skips setting the delegation",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command was executed",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Turns confirmations before changes on or off",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Drew Furgiuele (@pittfurg), http://www.port1433.com",
        "Synopsis":  "Sets an SPN for a given service account in active directory (and also enables delegation to the same SPN by default)",
        "Name":  "Set-DbaSpn",
        "Links":  "https://dbatools.io/Set-DbaSpn",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eSet-DbaSpn -SPN MSSQLSvc\\SQLSERVERA.domain.something -ServiceAccount domain\\account\nPS C:\\\u003e Set-DbaSpn -SPN MSSQLSvc\\SQLSERVERA.domain.something -ServiceAccount domain\\account -EnableException\nConnects to Active Directory and adds a provided SPN to the given account.\r\nConnects to Active Directory and adds a provided SPN to the given account, suppressing all error messages and throw exceptions that can be caught instead\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eSet-DbaSpn -SPN MSSQLSvc\\SQLSERVERA.domain.something -ServiceAccount domain\\account -Credential ad\\sqldba\nConnects to Active Directory and adds a provided SPN to the given account. Uses alternative account to connect to AD.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eSet-DbaSpn -SPN MSSQLSvc\\SQLSERVERA.domain.something -ServiceAccount domain\\account -NoDelegation\nConnects to Active Directory and adds a provided SPN to the given account, without the delegation.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eTest-DbaSpn -ComputerName sql2016 | Where { $_.isSet -eq $false } | Set-DbaSpn\nSets all missing SPNs for sql2016\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eTest-DbaSpn -ComputerName sql2016 | Where { $_.isSet -eq $false } | Set-DbaSpn -WhatIf\nDisplays what would happen trying to set all missing SPNs for sql2016",
        "Syntax":  "Set-DbaSpn [-SPN] \u003cString\u003e [-ServiceAccount] \u003cString\u003e [[-Credential] \u003cPSCredential\u003e] [-NoDelegation] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Set-DbaStartupParameter",
        "Description":  "Modifies the startup parameters for a specified SQL Server Instance\n\nFor full details of what each parameter does, please refer to this MSDN article - https://msdn.microsoft.com/en-us/library/ms190737(v=sql.105).aspx",
        "Tags":  [
                     "Startup",
                     "Parameter",
                     "Configure"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The SQL Server instance to be modified\nIf the Sql Instance is offline path parameters will be ignored as we cannot test the instance\u0027s access to the path. If you want to force this to work then please use the Force switch",
                           "ServerInstance,SqlServer",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Windows or Sql Login Credential with permission to log into the SQL instance",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Credential",
                           "Windows Credential with permission to log on to the server running the SQL instance",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "MasterData",
                           "Path to the data file for the Master database\nWill be ignored if SqlInstance is offline or the Offline switch is set. To override this behaviour use the Force switch. This is to ensure you understand the risk as we cannot validate the path if \r\nthe instance is offline",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "MasterLog",
                           "Path to the log file for the Master database\nWill be ignored if SqlInstance is offline or the Offline switch is set. To override this behaviour use the Force switch. This is to ensure you understand the risk as we cannot validate the path if \r\nthe instance is offline",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ErrorLog",
                           "Path to the SQL Server error log file\nWill be ignored if SqlInstance is offline or the Offline switch is set. To override this behaviour use the Force switch. This is to ensure you understand the risk as we cannot validate the path if \r\nthe instance is offline",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "TraceFlags",
                           "A comma separated list of TraceFlags to be applied at SQL Server startup\r\nBy default these will be appended to any existing trace flags set",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "CommandPromptStart",
                           "Shortens startup time when starting SQL Server from the command prompt. Typically, the SQL Server Database Engine starts as a service by calling the Service Control Manager.\r\nBecause the SQL Server Database Engine does not start as a service when starting from the command prompt",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "MinimalStart",
                           "Starts an instance of SQL Server with minimal configuration. This is useful if the setting of a configuration value (for example, over-committing memory) has\r\nprevented the server from starting. Starting SQL Server in minimal configuration mode places SQL Server in single-user mode",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "MemoryToReserve",
                           "Specifies an integer number of megabytes (MB) of memory that SQL Server will leave available for memory allocations within the SQL Server process,\r\nbut outside the SQL Server memory pool. The memory outside of the memory pool is the area used by SQL Server for loading items such as extended procedure .dll files,\r\nthe OLE DB providers referenced by distributed queries, and automation objects referenced in Transact-SQL statements. The default is 256 MB.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "SingleUser",
                           "Start Sql Server in single user mode",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "SingleUserDetails",
                           "The username for single user",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "NoLoggingToWinEvents",
                           "Don\u0027t use Windows Application events log",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "StartAsNamedInstance",
                           "Allows you to start a named instance of SQL Server",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "DisableMonitoring",
                           "Disables the following monitoring features:\nSQL Server performance monitor counters\r\nKeeping CPU time and cache-hit ratio statistics\r\nCollecting information for the DBCC SQLPERF command\r\nCollecting information for some dynamic management views\r\nMany extended-events event points\n** Warning *\\* When you use the -x startup option, the information that is available for you to diagnose performance and functional problems with SQL Server is greatly reduced.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "IncreasedExtents",
                           "Increases the number of extents that are allocated for each file in a filegroup.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "TraceFlagsOverride",
                           "Overrides the default behaviour and replaces any existing trace flags. If not trace flags specified will just remove existing ones",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "StartUpConfig",
                           "Pass in a previously saved SQL Instance startup config\r\nusing this parameter will set TraceFlagsOverride to true, so existing Trace Flags will be overridden",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Offline",
                           "Setting this switch will try perform the requested actions without connect to the SQL Server Instance, this will speed things up if you know the Instance is offline.\nWhen working offline, path inputs (MasterData, MasterLog and ErrorLog) will be ignored, unless Force is specified",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Force",
                           "By default we test the values passed in via MasterData, MasterLog, ErrorLog",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Stuart Moore (@napalmgram), stuart-moore.com",
        "Synopsis":  "Sets the Startup Parameters for a SQL Server instance",
        "Name":  "Set-DbaStartupParameter",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eSet-DbaStartupParameter -SqlInstance server1\\instance1 -SingleUser\nWill configure the SQL Instance server1\\instance1 to startup up in Single User mode at next startup\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eSet-DbaStartupParameter -SqlInstance sql2016 -IncreasedExtents\nWill configure the SQL Instance sql2016 to IncreasedExtents = True (-E)\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eSet-DbaStartupParameter -SqlInstance sql2016  -IncreasedExtents:$false -WhatIf\nShows what would happen if you attempted to configure the SQL Instance sql2016 to IncreasedExtents = False (no -E)\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eSet-DbaStartupParameter -SqlInstance server1\\instance1 -SingleUser -TraceFlags 8032,8048\nThis will append Trace Flags 8032 and 8048 to the startup parameters\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eSet-DbaStartupParameter -SqlInstance sql2016 -SingleUser:$false -TraceFlagsOverride\nThis will remove all trace flags and set SingleUser to false\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eSet-DbaStartupParameter -SqlInstance server1\\instance1 -SingleUser -TraceFlags 8032,8048 -TraceFlagsOverride\nThis will set Trace Flags 8032 and 8048 to the startup parameters, removing any existing Trace Flags\n-------------------------- EXAMPLE 7 --------------------------\nPS C:\\\u003eSet-DbaStartupParameter -SqlInstance sql2016 -SingleUser:$false -TraceFlagsOverride -Offline\nThis will remove all trace flags and set SingleUser to false from an offline instance\n-------------------------- EXAMPLE 8 --------------------------\nPS C:\\\u003eSet-DbaStartupParameter -SqlInstance sql2016 -ErrorLog c:\\Sql\\ -Offline\nThis will attempt to change the ErrorLog path to c:\\sql\\. However, with the offline switch this will not happen. To force it, use the -Force switch like so:\nSet-DbaStartupParameter -SqlInstance sql2016 -ErrorLog c:\\Sql\\ -Offline -Force\n-------------------------- EXAMPLE 9 --------------------------\nPS C:\\\u003e$StartupConfig = Get-DbaStartupParameter -SqlInstance server1\\instance1\nPS C:\\\u003e Set-DbaStartupParameter -SqlInstance server1\\instance1 -SingleUser -NoLoggingToWinEvents\r\nPS C:\\\u003e #Restart your SQL instance with the tool of choice\r\nPS C:\\\u003e #Do Some work\r\nPS C:\\\u003e Set-DbaStartupParameter -SqlInstance server1\\instance1 -StartUpConfig $StartUpConfig\r\nPS C:\\\u003e #Restart your SQL instance with the tool of choice and you\u0027re back to normal\nIn this example we take a copy of the existing startup configuration of server1\\instance1\nWe then change the startup parameters ahead of some work\nAfter the work has been completed, we can push the original startup parameters back to server1\\instance1 and resume normal operation",
        "Syntax":  "Set-DbaStartupParameter [-SqlInstance] \u003cDbaInstanceParameter\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Credential] \u003cPSCredential\u003e] [[-MasterData] \u003cString\u003e] [[-MasterLog] \u003cString\u003e] [[-ErrorLog] \u003cString\u003e] [[-TraceFlags] \u003cString[]\u003e] [-CommandPromptStart] [-MinimalStart] [[-MemoryToReserve] \u003cInt32\u003e] [-SingleUser] [[-SingleUserDetails] \u003cString\u003e] [-NoLoggingToWinEvents] [-StartAsNamedInstance] [-DisableMonitoring] [-IncreasedExtents] [-TraceFlagsOverride] [[-StartUpConfig] \u003cObject\u003e] [-Offline] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Set-DbaTcpPort",
        "Description":  "This function changes the TCP port used by the specified SQL Server.",
        "Tags":  [
                     "Service",
                     "Port",
                     "TCP",
                     "Configure"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Credential",
                           "Credential object used to connect to the Windows server itself as a different user (like SQL Configuration Manager)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Port",
                           "TCPPort that SQLService should listen on.",
                           "",
                           true,
                           "false",
                           "0"
                       ],
                       [
                           "IpAddress",
                           "Which IpAddress should the portchange , if omitted allip (0.0.0.0) will be changed with the new port number.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "@H0s0n77",
        "Synopsis":  "Changes the TCP port used by the specified SQL Server.",
        "Name":  "Set-DbaTcpPort",
        "Links":  "https://dbatools.io/Set-DbaTcpPort",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eSet-DbaTcpPort -SqlInstance sql2017 -Port 1433\nSets the port number 1433 for all IP Addresses on the default instance on sql2017. Prompts for confirmation.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eSet-DbaTcpPort -SqlInstance winserver\\sqlexpress -IpAddress 192.168.1.22 -Port 1433 -Confirm:$false\nSets the port number 1433 for IP 192.168.1.22 on the sqlexpress instance on winserver. Does not prompt for confirmation.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eSet-DbaTcpPort -SqlInstance sql2017, sql2019 -port 1337 -Credential ad\\dba\nSets the port number 1337 for all IP Addresses on SqlInstance sql2017 and sql2019 using the credentials for ad\\dba. Prompts for confirmation.",
        "Syntax":  "Set-DbaTcpPort [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-Credential] \u003cPSCredential\u003e] [-Port] \u003cInt32\u003e [[-IpAddress] \u003cIPAddress[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Set-DbaTempdbConfig",
        "Description":  "Calculates tempdb size and file configurations based on passed parameters, calculated values, and Microsoft best practices. User must declare SQL Server to be configured and total data file size as mandatory values. Function then calculates the number of data files based on logical cores on the target host and create evenly sized data files based on the total data size declared by the user, with a log file 25% of the total data file size.\n\nOther parameters can adjust the settings as the user desires (such as different file paths, number of data files, and log file size). No functions that shrink or delete data files are performed. If you wish to do this, you will need to resize tempdb so that it is \"smaller\" than what the function will size it to before running the function.",
        "Tags":  [
                     "Tempdb",
                     "Space",
                     "Configure",
                     "Configuration"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "DataFileCount",
                           "Specifies the number of data files to create. If this number is not specified, the number of logical cores of the host will be used.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "DataFileSize",
                           "Specifies the total data file size in megabytes. This is distributed across the total number of data files.",
                           "",
                           true,
                           "false",
                           "0"
                       ],
                       [
                           "LogFileSize",
                           "Specifies the log file size in megabytes. If not specified, this will be set to 25% of total data file size.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "DataFileGrowth",
                           "Specifies the growth amount for the data file(s) in megabytes. The default is 512 MB.",
                           "",
                           false,
                           "false",
                           "512"
                       ],
                       [
                           "LogFileGrowth",
                           "Specifies the growth amount for the log file in megabytes. The default is 512 MB.",
                           "",
                           false,
                           "false",
                           "512"
                       ],
                       [
                           "DataPath",
                           "Specifies the filesystem path in which to create the tempdb data files. If not specified, current tempdb location will be used.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "LogPath",
                           "Specifies the filesystem path in which to create the tempdb log file. If not specified, current tempdb location will be used.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "OutFile",
                           "Specifies the filesystem path into which the generated T-SQL script will be saved.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "OutputScriptOnly",
                           "If this switch is enabled, only the T-SQL script to change the tempdb configuration is created and output.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "DisableGrowth",
                           "If this switch is enabled, the tempdb files will be configured to not grow. This overrides -DataFileGrowth and -LogFileGrowth.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Set-DbaTempDbConfiguration,Set-SqlTempDbConfiguration",
        "Author":  "Michael Fal (@Mike_Fal), http://mikefal.net",
        "Synopsis":  "Sets tempdb data and log files according to best practices.",
        "Name":  "Set-DbaTempdbConfig",
        "Links":  "https://dbatools.io/Set-DbaTempdbConfig",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eSet-DbaTempdbConfig -SqlInstance localhost -DataFileSize 1000\nCreates tempdb with a number of data files equal to the logical cores where each file is equal to 1000MB divided by the number of logical cores, with a log file of 250MB.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eSet-DbaTempdbConfig -SqlInstance localhost -DataFileSize 1000 -DataFileCount 8\nCreates tempdb with 8 data files, each one sized at 125MB, with a log file of 250MB.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eSet-DbaTempdbConfig -SqlInstance localhost -DataFileSize 1000 -OutputScriptOnly\nProvides a SQL script output to configure tempdb according to the passed parameters.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eSet-DbaTempdbConfig -SqlInstance localhost -DataFileSize 1000 -DisableGrowth\nDisables the growth for the data and log files.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eSet-DbaTempdbConfig -SqlInstance localhost -DataFileSize 1000 -OutputScriptOnly\nReturns the T-SQL script representing tempdb configuration.",
        "Syntax":  "Set-DbaTempdbConfig [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-DataFileCount] \u003cInt32\u003e] [-DataFileSize] \u003cInt32\u003e [[-LogFileSize] \u003cInt32\u003e] [[-DataFileGrowth] \u003cInt32\u003e] [[-LogFileGrowth] \u003cInt32\u003e] [[-DataPath] \u003cString\u003e] [[-LogPath] \u003cString\u003e] [[-OutFile] \u003cString\u003e] [-OutputScriptOnly] [-DisableGrowth] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Show-DbaDbList",
        "Description":  "Shows a list of databases in a GUI. Returns a string holding the name of the selected database. Hitting cancel returns null.",
        "Tags":  [
                     "Database",
                     "FileSystem"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances..",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Title",
                           "Title of the window being displayed. Default is \"Select Database\".",
                           "",
                           false,
                           "false",
                           "Select Database"
                       ],
                       [
                           "Header",
                           "Header text displayed above the database listing. Default is \"Select the database:\".",
                           "",
                           false,
                           "false",
                           "Select the database:"
                       ],
                       [
                           "DefaultDb",
                           "Specify a database to have selected when the window appears.",
                           "",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Show-DbaDatabaseList,Show-SqlDatabaseList",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Shows a list of databases in a GUI.",
        "Name":  "Show-DbaDbList",
        "Links":  "https://dbatools.io/Show-DbaDbList",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eShow-DbaDbList -SqlInstance sqlserver2014a\nShows a GUI list of databases using Windows Authentication to connect to the SQL Server. Returns a string of the selected database.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eShow-DbaDbList -SqlInstance sqlserver2014a -SqlCredential $cred\nShows a GUI list of databases using SQL credentials to connect to the SQL Server. Returns a string of the selected database.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eShow-DbaDbList -SqlInstance sqlserver2014a -DefaultDb master\nShows a GUI list of databases using Windows Authentication to connect to the SQL Server. The \"master\" database will be selected when the lists shows. Returns a string of the selected database.",
        "Syntax":  "Show-DbaDbList [-SqlInstance] \u003cDbaInstanceParameter\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Title] \u003cString\u003e] [[-Header] \u003cString\u003e] [[-DefaultDb] \u003cString\u003e] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Show-DbaServerFileSystem",
        "Description":  "Similar to the remote file system popup you see when browsing a remote SQL Server in SQL Server Management Studio, this function allows you to traverse the remote SQL Server\u0027s file structure.\n\nShow-DbaServerFileSystem uses SQL Management Objects to browse the directories and what you see is limited to the permissions of the account running the command.",
        "Tags":  [
                     "Storage",
                     "FileSystem"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. Defaults to localhost.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Show-SqlServerFileSystem",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Shows file system on remote SQL Server in a local GUI and returns the selected directory name",
        "Name":  "Show-DbaServerFileSystem",
        "Links":  "https://dbatools.io/Show-DbaServerFileSystem",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eShow-DbaServerFileSystem -SqlInstance sql2017\nShows a list of databases using Windows Authentication to connect to the SQL Server. Returns a string of the selected path.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eShow-DbaServerFileSystem -SqlInstance sql2017 -SqlCredential $cred\nShows a list of databases using SQL credentials to connect to the SQL Server. Returns a string of the selected path.",
        "Syntax":  "Show-DbaServerFileSystem [-SqlInstance] \u003cDbaInstanceParameter\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Start-DbaAgentJob",
        "Description":  "This command starts a job then returns connected SMO object for SQL Agent Job information for each instance(s) of SQL Server.",
        "Tags":  [
                     "Job",
                     "Agent"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Job",
                           "The job(s) to process - this list is auto-populated from the server. If unspecified, all jobs will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeJob",
                           "The job(s) to exclude - this list is auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Internal parameter that enables piping",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "AllJobs",
                           "Retrieve all the jobs",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Wait",
                           "Wait for output until the job has started",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WaitPeriod",
                           "Wait period in seconds to use when -Wait is used",
                           "",
                           false,
                           "false",
                           "3"
                       ],
                       [
                           "SleepPeriod",
                           "Period in milliseconds to wait after a job has started",
                           "",
                           false,
                           "false",
                           "300"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Starts a running SQL Server Agent Job.",
        "Name":  "Start-DbaAgentJob",
        "Links":  "https://dbatools.io/Start-DbaAgentJob",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eStart-DbaAgentJob -SqlInstance localhost\nStarts all running SQL Agent Jobs on the local SQL Server instance\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaAgentJob -SqlInstance sql2016 -Job cdc.DBWithCDC_capture | Start-DbaAgentJob\nStarts the cdc.DBWithCDC_capture SQL Agent Job on sql2016\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eStart-DbaAgentJob -SqlInstance sql2016 -Job cdc.DBWithCDC_capture\nStarts the cdc.DBWithCDC_capture SQL Agent Job on sql2016\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003e$servers | Find-DbaAgentJob -IsFailed | Start-DbaAgentJob\nRestarts all failed jobs on all servers in the $servers collection\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eStart-DbaAgentJob -SqlInstance sql2016 -AllJobs\nStart all the jobs",
        "Syntax":  "Start-DbaAgentJob [-SqlCredential \u003cPSCredential\u003e] [-Job \u003cString[]\u003e] [-ExcludeJob \u003cString[]\u003e] [-AllJobs] [-Wait] [-WaitPeriod \u003cInt32\u003e] [-SleepPeriod \u003cInt32\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nStart-DbaAgentJob -SqlInstance \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Job \u003cString[]\u003e] [-ExcludeJob \u003cString[]\u003e] [-AllJobs] [-Wait] [-WaitPeriod \u003cInt32\u003e] [-SleepPeriod \u003cInt32\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nStart-DbaAgentJob [-SqlCredential \u003cPSCredential\u003e] [-Job \u003cString[]\u003e] [-ExcludeJob \u003cString[]\u003e] -InputObject \u003cJob[]\u003e [-AllJobs] [-Wait] [-WaitPeriod \u003cInt32\u003e] [-SleepPeriod \u003cInt32\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Start-DbaEndpoint",
        "Description":  "Starts endpoints on a SQL Server instance.",
        "Tags":  "Endpoint",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EndPoint",
                           "Only start specific endpoints.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AllEndpoints",
                           "Start all endpoints on an instance.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "InputObject",
                           "Enables piping from Get-Endpoint.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Starts endpoints on a SQL Server instance.",
        "Name":  "Start-DbaEndpoint",
        "Links":  "https://dbatools.io/Start-DbaEndpoint",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eStart-DbaEndpoint -SqlInstance sqlserver2012 -AllEndpoints\nStarts all endpoints on the sqlserver2014 instance.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eStart-DbaEndpoint -SqlInstance sqlserver2012 -Endpoint endpoint1,endpoint2 -SqlCredential sqladmin\nLogs into sqlserver2012 using alternative credentials and starts the endpoint1 and endpoint2 endpoints.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-Endpoint -SqlInstance sqlserver2012 -Endpoint endpoint1 | Start-DbaEndpoint\nStarts the endpoints returned from the Get-Endpoint function.",
        "Syntax":  "Start-DbaEndpoint [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-EndPoint] \u003cString[]\u003e] [-AllEndpoints] [[-InputObject] \u003cEndpoint[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Start-DbaMigration",
        "Description":  "Start-DbaMigration consolidates most of the migration tools in dbatools into one command.  This is useful when you\u0027re looking to migrate entire instances. It less flexible than using the underlying functions. Think of it as an easy button. It migrates:\n\nAll user databases to exclude support databases such as ReportServerTempDB (Use -IncludeSupportDbs for this). Use -Exclude Databases to skip.\nAll logins. Use -Exclude Logins to skip.\nAll database mail objects. Use -Exclude DatabaseMail\nAll credentials. Use -Exclude Credentials to skip.\nAll objects within the Job Server (SQL Agent). Use -Exclude AgentServer to skip.\nAll linked servers. Use -Exclude LinkedServers to skip.\nAll groups and servers within Central Management Server. Use -Exclude CentralManagementServer to skip.\nAll SQL Server configuration objects (everything in sp_configure). Use -Exclude SpConfigure to skip.\nAll user objects in system databases. Use -Exclude SysDbUserObjects to skip.\nAll system triggers. Use -Exclude SystemTriggers to skip.\nAll system backup devices. Use -Exclude BackupDevices to skip.\nAll Audits. Use -Exclude Audits to skip.\nAll Endpoints. Use -Exclude Endpoints to skip.\nAll Extended Events. Use -Exclude ExtendedEvents to skip.\nAll Policy Management objects. Use -Exclude PolicyManagement to skip.\nAll Resource Governor objects. Use -Exclude ResourceGovernor to skip.\nAll Server Audit Specifications. Use -Exclude ServerAuditSpecifications to skip.\nAll Custom Errors (User Defined Messages). Use -Exclude CustomErrors to skip.\nCopies All Data Collector collection sets. Does not configure the server. Use -Exclude DataCollector to skip.\n\nThis script provides the ability to migrate databases using detach/copy/attach or backup/restore. SQL Server logins, including passwords, SID and database/server roles can also be migrated. In addition, job server objects can be migrated and server configuration settings can be exported or migrated. This script works with named instances, clusters and SQL Express.\n\nBy default, databases will be migrated to the destination SQL Server\u0027s default data and log directories. You can override this by specifying -ReuseSourceFolderStructure. Filestreams and filegroups are also migrated. Safety is emphasized.",
        "Tags":  "Migration",
        "Params":  [
                       [
                           "Source",
                           "Source SQL Server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Destination",
                           "Destination SQL Server. You may specify multiple servers.\nNote that when using -BackupRestore with multiple servers, the backup will only be performed once and backups will be deleted at the end (if you didn\u0027t specify -ExcludeBackupCleanup).\nWhen using -DetachAttach with multiple servers, -Reattach must be specified.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "DetachAttach",
                           "If this switch is enabled, the the detach/copy/attach method is used to perform database migrations. No files are deleted on Source. If the destination attachment fails, the source database will be \r\nreattached. File copies are performed over administrative shares (\\\\server\\x$\\mssql) using BITS. If a database is being mirrored, the mirror will be broken prior to migration.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Reattach",
                           "If this switch is enabled, all databases are reattached to Source after a DetachAttach migration is complete.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "BackupRestore",
                           "If this switch is enabled, the Copy-Only backup and restore method is used to perform database migrations. You must specify -SharedPath with a valid UNC format as well (\\\\server\\share).",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "SharedPath",
                           "Specifies the network location for the backup files. The SQL Server service accounts on both Source and Destination must have read/write permission to access this location.",
                           "NetworkShare",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "WithReplace",
                           "If this switch is enabled, databases are restored from backup using WITH REPLACE. This is useful if you want to stage some complex file paths.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "NoRecovery",
                           "If this switch is enabled, databases will be left in the No Recovery state to enable further backups to be added.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "SetSourceReadOnly",
                           "If this switch is enabled, all migrated databases will be set to ReadOnly on the source instance prior to detach/attach \u0026 backup/restore. If -Reattach is specified, the database is set to read-only \r\nafter reattaching.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "ReuseSourceFolderStructure",
                           "If this switch is enabled, the data and log directory structures on Source will be kept on Destination. Otherwise, databases will be migrated to Destination\u0027s default data and log directories.\nConsider this if you\u0027re migrating between different versions and use part of Microsoft\u0027s default SQL structure (MSSQL12.INSTANCE, etc.).",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "IncludeSupportDbs",
                           "If this switch is enabled, the ReportServer, ReportServerTempDb, SSIDb, and distribution databases will be migrated if they exist. A logfile named $SOURCE-$DESTINATION-$date-Sqls.csv will be written \r\nto the current directory. Requires -BackupRestore or -DetachAttach.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "SourceSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "DestinationSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Exclude",
                           "Exclude one or more objects to migrate\nDatabases\r\nLogins\r\nAgentServer\r\nCredentials\r\nLinkedServers\r\nSpConfigure\r\nCentralManagementServer\r\nDatabaseMail\r\nSysDbUserObjects\r\nSystemTriggers\r\nBackupDevices\r\nAudits\r\nEndpoints\r\nExtendedEvents\r\nPolicyManagement\r\nResourceGovernor\r\nServerAuditSpecifications\r\nCustomErrors\r\nDataCollector",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "DisableJobsOnDestination",
                           "If this switch is enabled, migrated SQL Agent jobs will be disabled on the destination instance.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "DisableJobsOnSource",
                           "If this switch is enabled, SQL Agent jobs will be disabled on the source instance.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "ExcludeSaRename",
                           "If this switch is enabled, the sa account will not be renamed on the destination instance to match the source.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "UseLastBackup",
                           "Use the last full, diff and logs instead of performing backups. Note that the backups must exist in a location accessible by all destination servers, such a network share.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Continue",
                           "If specified, will to attempt to restore transaction log backups on top of existing database(s) in Recovering or Standby states. Only usable with -UseLastBackup",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Force",
                           "If migrating users, forces drop and recreate of SQL and Windows logins.\r\nIf migrating databases, deletes existing databases with matching names.\r\nIf using -DetachAttach, -Force will break mirrors and drop dbs from Availability Groups.\nFor other migration objects, it will just drop existing items and readd, if -force is supported within the underlying function.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Start-SqlMigration",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Migrates SQL Server *ALL* databases, logins, database mail profiles/accounts, credentials, SQL Agent objects, linked servers,\nCentral Management Server objects, server configuration settings (sp_configure), user objects in systems databases,\nsystem triggers and backup devices from one SQL Server to another.\n\nFor more granular control, please use Exclude or use the other functions available within the dbatools module.",
        "Name":  "Start-DbaMigration",
        "Links":  "https://dbatools.io/Start-DbaMigration",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eStart-DbaMigration -Source sqlserver\\instance -Destination sqlcluster -DetachAttach\nAll databases, logins, job objects and sp_configure options will be migrated from sqlserver\\instance to sqlcluster. Databases will be migrated using the detach/copy files/attach method. Dbowner will \r\nbe updated. User passwords, SIDs, database roles and server roles will be migrated along with the login.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e$params = @{\n\u003e\u003e Source = \"sqlcluster\"\r\n\u003e\u003e Destination = \"sql2016\"\r\n\u003e\u003e SourceSqlCredential = $scred\r\n\u003e\u003e DestinationSqlCredential = $cred\r\n\u003e\u003e SharedPath = \"\\\\fileserver\\share\\sqlbackups\\Migration\"\r\n\u003e\u003e BackupRestore = $true\r\n\u003e\u003e ReuseSourceFolderStructure = $true\r\n\u003e\u003e Force = $true\r\n\u003e\u003e }\r\n\u003e\u003e\r\nPS C:\\\u003e Start-DbaMigration @params -Verbose\nUtilizes splatting technique to set all the needed parameters. This will migrate databases using the backup/restore method. It will also include migration of the logins, database mail configuration, \r\ncredentials, SQL Agent, Central Management Server, and SQL Server global configuration.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eStart-DbaMigration -Verbose -Source sqlcluster -Destination sql2016 -DetachAttach -Reattach -SetSourceReadonly\nMigrates databases using detach/copy/attach. Reattach at source and set source databases read-only. Also migrates everything else.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003e$PSDefaultParameters = @{\n\u003e\u003e \"dbatools:Source\" = \"sqlcluster\"\r\n\u003e\u003e \"dbatools:Destination\" = \"sql2016\"\r\n\u003e\u003e }\r\n\u003e\u003e\r\nPS C:\\\u003e Start-DbaMigration -Verbose -Exclude Databases, Logins\nUtilizes the PSDefaultParameterValues system variable, and sets the Source and Destination parameters for any function in the module that has those parameter names. This prevents the need from \r\npassing them in constantly.\r\nThe execution of the function will migrate everything but logins and databases.",
        "Syntax":  "Start-DbaMigration [[-Source] \u003cDbaInstanceParameter\u003e] [[-Destination] \u003cDbaInstanceParameter[]\u003e] [-DetachAttach] [-Reattach] [-BackupRestore] [[-SharedPath] \u003cString\u003e] [-WithReplace] [-NoRecovery] [-SetSourceReadOnly] [-ReuseSourceFolderStructure] [-IncludeSupportDbs] [[-SourceSqlCredential] \u003cPSCredential\u003e] [[-DestinationSqlCredential] \u003cPSCredential\u003e] [[-Exclude] \u003cString[]\u003e] [-DisableJobsOnDestination] [-DisableJobsOnSource] [-ExcludeSaRename] [-UseLastBackup] [-Continue] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Start-DbaPfDataCollectorSet",
        "Description":  "Starts Performance Monitor Data Collector Set.",
        "Tags":  "PerfMon",
        "Params":  [
                       [
                           "ComputerName",
                           "The target computer. Defaults to localhost.",
                           "",
                           false,
                           "false",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Allows you to login to $ComputerName using alternative credentials. To use:\n$cred = Get-Credential, then pass $cred object to the -Credential parameter.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "CollectorSet",
                           "The name of the Collector Set to start.",
                           "DataCollectorSet",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Accepts the object output by Get-DbaPfDataCollectorSet via the pipeline.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "NoWait",
                           "If this switch is enabled, the collector is started and the results are returned immediately.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Starts Performance Monitor Data Collector Set.",
        "Name":  "Start-DbaPfDataCollectorSet",
        "Links":  "https://dbatools.io/Start-DbaPfDataCollectorSet",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eStart-DbaPfDataCollectorSet\nAttempts to start all ready Collectors on localhost.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eStart-DbaPfDataCollectorSet -ComputerName sql2017\nAttempts to start all ready Collectors on localhost.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eStart-DbaPfDataCollectorSet -ComputerName sql2017, sql2016 -Credential ad\\sqldba -CollectorSet \u0027System Correlation\u0027\nStarts the \u0027System Correlation\u0027 Collector on sql2017 and sql2016 using alternative credentials.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaPfDataCollectorSet -CollectorSet \u0027System Correlation\u0027 | Start-DbaPfDataCollectorSet\nStarts the \u0027System Correlation\u0027 Collector.",
        "Syntax":  "Start-DbaPfDataCollectorSet [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [[-CollectorSet] \u003cString[]\u003e] [[-InputObject] \u003cObject[]\u003e] [-NoWait] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Start-DbaService",
        "Description":  "Starts the SQL Server related services on one or more computers. Will follow SQL Server service dependencies.\n\nRequires Local Admin rights on destination computer(s).",
        "Tags":  [
                     "Service",
                     "SqlServer",
                     "Instance",
                     "Connect"
                 ],
        "Params":  [
                       [
                           "ComputerName",
                           "The target SQL Server instance or instances.",
                           "cn,host,Server",
                           false,
                           "false",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "InstanceName",
                           "Only affects services that belong to the specific instances.",
                           "Instance",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Type",
                           "Use -Type to collect only services of the desired SqlServiceType.\r\nCan be one of the following: \"Agent\",\"Browser\",\"Engine\",\"FullText\",\"SSAS\",\"SSIS\",\"SSRS\"",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "A collection of services from Get-DbaService",
                           "ServiceCollection",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Timeout",
                           "How long to wait for the start/stop request completion before moving on. Specify 0 to wait indefinitely.",
                           "",
                           false,
                           "false",
                           "60"
                       ],
                       [
                           "Credential",
                           "Credential object used to connect to the computer as a different user.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the cmdlet runs. The cmdlet is not run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before running the cmdlet.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Start-DbaSqlService",
        "Author":  "Kirill Kravtsov (@nvarscar)",
        "Synopsis":  "Starts SQL Server services on a computer.",
        "Name":  "Start-DbaService",
        "Links":  "https://dbatools.io/Start-DbaService",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eStart-DbaService -ComputerName sqlserver2014a\nStarts the SQL Server related services on computer sqlserver2014a.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e\u0027sql1\u0027,\u0027sql2\u0027,\u0027sql3\u0027| Get-DbaService | Start-DbaService\nGets the SQL Server related services on computers sql1, sql2 and sql3 and starts them.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eStart-DbaService -ComputerName sql1,sql2 -Instance MSSQLSERVER\nStarts the SQL Server services related to the default instance MSSQLSERVER on computers sql1 and sql2.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eStart-DbaService -ComputerName $MyServers -Type SSRS\nStarts the SQL Server related services of type \"SSRS\" (Reporting Services) on computers in the variable MyServers.",
        "Syntax":  "Start-DbaService [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [-InstanceName \u003cString[]\u003e] [-Type \u003cString[]\u003e] [-Timeout \u003cInt32\u003e] [-Credential \u003cPSCredential\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nStart-DbaService [-InstanceName \u003cString[]\u003e] [-Type \u003cString[]\u003e] -InputObject \u003cObject[]\u003e [-Timeout \u003cInt32\u003e] [-Credential \u003cPSCredential\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Start-DbaTrace",
        "Description":  "Starts SQL Server traces",
        "Tags":  [
                     "Security",
                     "Trace"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance",
                           "ServerInstance,SqlServer",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Id",
                           "A list of trace ids",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Internal parameter for piping",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Starts SQL Server traces",
        "Name":  "Start-DbaTrace",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eStart-DbaTrace -SqlInstance sql2008\nStarts all traces on sql2008\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eStart-DbaTrace -SqlInstance sql2008 -Id 1\nStarts all trace with ID 1 on sql2008\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaTrace -SqlInstance sql2008 | Out-GridView -PassThru | Start-DbaTrace\nStarts selected traces on sql2008",
        "Syntax":  "Start-DbaTrace [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Id] \u003cInt32[]\u003e] [[-InputObject] \u003cObject[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Start-DbaXESession",
        "Description":  "This script starts Extended Events sessions on a SQL Server instance.",
        "Tags":  [
                     "ExtendedEvent",
                     "XE",
                     "XEvent"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2008 or higher.",
                           "ServerInstance,SqlServer",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Session",
                           "Only start specific Extended Events sessions.",
                           "Sessions",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "StopAt",
                           "Specifies a datetime at which the session will be stopped. This is done via a self-deleting schedule.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AllSessions",
                           "Start all Extended Events sessions on an instance, ignoring the packaged sessions: AlwaysOn_health, system_health, telemetry_xevents.",
                           "",
                           true,
                           "false",
                           "False"
                       ],
                       [
                           "InputObject",
                           "Internal parameter to support piping from Get-DbaXESession",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Doug Meyers",
        "Synopsis":  "Starts Extended Events sessions.",
        "Name":  "Start-DbaXESession",
        "Links":  "https://dbatools.io/Start-DbaXESession",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eStart-DbaXESession -SqlInstance sqlserver2012 -AllSessions\nStarts all Extended Event Session on the sqlserver2014 instance.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eStart-DbaXESession -SqlInstance sqlserver2012 -Session xesession1,xesession2\nStarts the xesession1 and xesession2 Extended Event sessions.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eStart-DbaXESession -SqlInstance sqlserver2012 -Session xesession1,xesession2 -StopAt (Get-Date).AddMinutes(30)\nStarts the xesession1 and xesession2 Extended Event sessions and stops them in 30 minutes.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaXESession -SqlInstance sqlserver2012 -Session xesession1 | Start-DbaXESession\nStarts the sessions returned from the Get-DbaXESession function.",
        "Syntax":  "Start-DbaXESession [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] -Session \u003cObject[]\u003e [-StopAt \u003cDateTime\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nStart-DbaXESession [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-StopAt \u003cDateTime\u003e] -AllSessions [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nStart-DbaXESession [-StopAt \u003cDateTime\u003e] -InputObject \u003cSession[]\u003e [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Start-DbaXESmartTarget",
        "Description":  "XESmartTarget offers the ability to set up complex actions in response to Extended Events captured in sessions, without writing a single line of code.\n\nSee more at https://github.com/spaghettidba/XESmartTarget/wiki",
        "Tags":  [
                     "ExtendedEvent",
                     "XE",
                     "XEvent"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2008 or higher.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Specifies the name of the database that contains the target table.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Session",
                           "Name of the Extended Events session to attach to.\nYou can monitor a single session with an instance of XESmartTarget. In case you need to perform action on multiple sessions, run an additional instance of XESmartTarget, with its own configuration \r\nfile.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "FailOnProcessingError",
                           "If this switch is enabled, the a processing error will trigger a failure.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Responder",
                           "The list of responses can include zero or more Response objects, each to be configured by specifying values for their public members.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Template",
                           "Path to the dbatools built-in templates",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "NotAsJob",
                           "If this switch is enabled, output will be sent to screen indefinitely. BY default, a job will be run in the background.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl) | SmartTarget by Gianluca Sartori (@spaghettidba)",
        "Synopsis":  "XESmartTarget runs as a client application for an Extended Events session running on a SQL Server instance.",
        "Name":  "Start-DbaXESmartTarget",
        "Links":  "https://dbatools.io/Start-DbaXESmartTarget",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003e$response = New-DbaXESmartQueryExec -SqlInstance sql2017 -Database dbadb -Query \"update table set whatever = 1\"\nPS C:\\\u003eStart-DbaXESmartTarget -SqlInstance sql2017 -Session deadlock_tracker -Responder $response\nExecutes a T-SQL command against dbadb on sql2017 whenever a deadlock event is recorded.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e$response = New-DbaXESmartQueryExec -SqlInstance sql2017 -Database dbadb -Query \"update table set whatever = 1\"\nPS C:\\\u003e$params = @{\r\n\u003e\u003e SmtpServer = \"smtp.ad.local\"\r\n\u003e\u003e To = \"[email protected]\"\r\n\u003e\u003e Sender = \"[email protected]\"\r\n\u003e\u003e Subject = \"Query executed\"\r\n\u003e\u003e Body = \"Query executed at {collection_time}\"\r\n\u003e\u003e Attachment = \"batch_text\"\r\n\u003e\u003e AttachmentFileName = \"query.sql\"\r\n\u003e\u003e }\r\nPS C:\\\u003e $emailresponse = New-DbaXESmartEmail @params\r\nPS C:\\\u003e Start-DbaXESmartTarget -SqlInstance sql2017 -Session querytracker -Responder $response, $emailresponse\nExecutes a T-SQL command against dbadb on sql2017 and sends an email whenever a querytracker event is recorded.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003e$columns = \"cpu_time\", \"duration\", \"physical_reads\", \"logical_reads\", \"writes\", \"row_count\", \"batch_text\"\nPS C:\\\u003e $response = New-DbaXESmartTableWriter -SqlInstance sql2017 -Database dbadb -Table deadlocktracker -OutputColumns $columns -Filter \"duration \u003e 10000\"\r\nPS C:\\\u003e Start-DbaXESmartTarget -SqlInstance sql2017 -Session deadlock_tracker -Responder $response\nWrites Extended Events to the deadlocktracker table in dbadb on sql2017.",
        "Syntax":  "Start-DbaXESmartTarget [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cString\u003e] [-Session] \u003cString\u003e [-FailOnProcessingError] [[-Responder] \u003cObject[]\u003e] [[-Template] \u003cString[]\u003e] [-NotAsJob] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Stop-DbaAgentJob",
        "Description":  "This command stops a job then returns connected SMO object for SQL Agent Job information for each instance(s) of SQL Server.",
        "Tags":  [
                     "Job",
                     "Agent"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Job",
                           "The job(s) to process - this list is auto-populated from the server. If unspecified, all jobs will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeJob",
                           "The job(s) to exclude - this list is auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Internal parameter that enables piping",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Wait",
                           "Wait for output until the job has completely stopped",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Stops a running SQL Server Agent Job.",
        "Name":  "Stop-DbaAgentJob",
        "Links":  "https://dbatools.io/Stop-DbaAgentJob",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eStop-DbaAgentJob -SqlInstance localhost\nStops all running SQL Agent Jobs on the local SQL Server instance\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaAgentJob -SqlInstance sql2016 -Job cdc.DBWithCDC_capture | Stop-DbaAgentJob\nStops the cdc.DBWithCDC_capture SQL Agent Job on sql2016\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eStop-DbaAgentJob -SqlInstance sql2016 -Job cdc.DBWithCDC_capture\nStops the cdc.DBWithCDC_capture SQL Agent Job on sql2016",
        "Syntax":  "Stop-DbaAgentJob [-SqlCredential \u003cPSCredential\u003e] [-Job \u003cString[]\u003e] [-ExcludeJob \u003cString[]\u003e] [-Wait] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nStop-DbaAgentJob -SqlInstance \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Job \u003cString[]\u003e] [-ExcludeJob \u003cString[]\u003e] [-Wait] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nStop-DbaAgentJob [-SqlCredential \u003cPSCredential\u003e] [-Job \u003cString[]\u003e] [-ExcludeJob \u003cString[]\u003e] -InputObject \u003cJob[]\u003e [-Wait] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Stop-DbaEndpoint",
        "Description":  "Stops endpoints on a SQL Server instance.",
        "Tags":  "Endpoint",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EndPoint",
                           "Only stop specific endpoints.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AllEndpoints",
                           "Stops all endpoints on an instance.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "InputObject",
                           "Enables piping from Get-Endpoint.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Stops endpoints on a SQL Server instance.",
        "Name":  "Stop-DbaEndpoint",
        "Links":  "https://dbatools.io/Stop-DbaEndpoint",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eStop-DbaEndpoint -SqlInstance sql2017a -AllEndpoints\nStops all endpoints on the sqlserver2014 instance.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eStop-DbaEndpoint -SqlInstance sql2017a -Endpoint endpoint1,endpoint2\nStops the endpoint1 and endpoint2 endpoints.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-Endpoint -SqlInstance sql2017a -Endpoint endpoint1 | Stop-DbaEndpoint\nStops the endpoints returned from the Get-Endpoint command.",
        "Syntax":  "Stop-DbaEndpoint [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-EndPoint] \u003cString[]\u003e] [-AllEndpoints] [[-InputObject] \u003cEndpoint[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Stop-DbaPfDataCollectorSet",
        "Description":  "Stops Performance Monitor Data Collector Set.",
        "Tags":  "PerfMon",
        "Params":  [
                       [
                           "ComputerName",
                           "The target computer. Defaults to localhost.",
                           "",
                           false,
                           "false",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Allows you to login to $ComputerName using alternative credentials. To use:\n$cred = Get-Credential, then pass $cred object to the -Credential parameter.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "CollectorSet",
                           "The name of the Collector Set to stop.",
                           "DataCollectorSet",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Accepts the object output by Get-DbaPfDataCollectorSet via the pipeline.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "NoWait",
                           "If this switch is enabled, the collector is stopped and the results are returned immediately.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Stops Performance Monitor Data Collector Set.",
        "Name":  "Stop-DbaPfDataCollectorSet",
        "Links":  "https://dbatools.io/Stop-DbaPfDataCollectorSet",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eStop-DbaPfDataCollectorSet\nAttempts to stop all ready Collectors on localhost.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eStop-DbaPfDataCollectorSet -ComputerName sql2017\nAttempts to stop all ready Collectors on localhost.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eStop-DbaPfDataCollectorSet -ComputerName sql2017, sql2016 -Credential ad\\sqldba -CollectorSet \u0027System Correlation\u0027\nStops the \u0027System Correlation\u0027 Collector on sql2017 and sql2016 using alternative credentials.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaPfDataCollectorSet -CollectorSet \u0027System Correlation\u0027 | Stop-DbaPfDataCollectorSet\nStops the \u0027System Correlation\u0027 Collector.",
        "Syntax":  "Stop-DbaPfDataCollectorSet [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [[-CollectorSet] \u003cString[]\u003e] [[-InputObject] \u003cObject[]\u003e] [-NoWait] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Stop-DbaProcess",
        "Description":  "This command kills all spids associated with a spid, login, host, program or database.\n\nIf you are attempting to kill your own login sessions, the process performing the kills will be skipped.",
        "Tags":  "Processes",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Spid",
                           "Specifies one or more spids to be killed. Options for this parameter are auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeSpid",
                           "Specifies one or more spids which will not be killed. Options for this parameter are auto-populated from the server.\nExclude is the last filter to run, so even if a spid matches (for example) Hosts, if it\u0027s listed in Exclude it wil be excluded.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Specifies one or more databases whose processes will be killed. Options for this parameter are auto-populated from the server and only databases that have active processes are offered.\nThis parameter is auto-populated from -SqlInstance and allows only database names that have active processes. You can specify one or more Databases whose processes will be killed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Login",
                           "Specifies one or more login names whose processes will be killed. Options for this parameter are auto-populated from the server and only login names that have active processes are offered.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Hostname",
                           "Specifies one or more client hostnames whose processes will be killed. Options for this parameter are auto-populated from the server and only hostnames that have active processes are offered.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Program",
                           "Specifies one or more client programs whose processes will be killed. Options for this parameter are auto-populated from the server and only programs that have active processes are offered.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "This is the process object passed by Get-DbaProcess if using a pipeline.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "This command finds and kills SQL Server processes.",
        "Name":  "Stop-DbaProcess",
        "Links":  "https://dbatools.io/Stop-DbaProcess",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eStop-DbaProcess -SqlInstance sqlserver2014a -Login base\\ctrlb, sa\nFinds all processes for base\\ctrlb and sa on sqlserver2014a, then kills them. Uses Windows Authentication to login to sqlserver2014a.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eStop-DbaProcess -SqlInstance sqlserver2014a -SqlCredential $credential -Spid 56, 77\nFinds processes for spid 56 and 57, then kills them. Uses alternative (SQL or Windows) credentials to login to sqlserver2014a.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eStop-DbaProcess -SqlInstance sqlserver2014a -Program \u0027Microsoft SQL Server Management Studio\u0027\nFinds processes that were created in Microsoft SQL Server Management Studio, then kills them.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eStop-DbaProcess -SqlInstance sqlserver2014a -Hostname workstationx, server100\nFinds processes that were initiated (computers/clients) workstationx and server 1000, then kills them.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eStop-DbaProcess -SqlInstance sqlserver2014  -Database tempdb -WhatIf\nShows what would happen if the command were executed.\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eGet-DbaProcess -SqlInstance sql2016 -Program \u0027dbatools PowerShell module - dbatools.io\u0027 | Stop-DbaProcess\nFinds processes that were created with dbatools, then kills them.",
        "Syntax":  "Stop-DbaProcess [-SqlCredential \u003cPSCredential\u003e] [-Spid \u003cInt32[]\u003e] [-ExcludeSpid \u003cInt32[]\u003e] [-Database \u003cString[]\u003e] [-Login \u003cString[]\u003e] [-Hostname \u003cString[]\u003e] [-Program \u003cString[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nStop-DbaProcess -SqlInstance \u003cDbaInstanceParameter\u003e [-SqlCredential \u003cPSCredential\u003e] [-Spid \u003cInt32[]\u003e] [-ExcludeSpid \u003cInt32[]\u003e] [-Database \u003cString[]\u003e] [-Login \u003cString[]\u003e] [-Hostname \u003cString[]\u003e] [-Program \u003cString[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nStop-DbaProcess [-SqlCredential \u003cPSCredential\u003e] [-Spid \u003cInt32[]\u003e] [-ExcludeSpid \u003cInt32[]\u003e] [-Database \u003cString[]\u003e] [-Login \u003cString[]\u003e] [-Hostname \u003cString[]\u003e] [-Program \u003cString[]\u003e] -InputObject \u003cObject[]\u003e [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Stop-DbaService",
        "Description":  "Stops the SQL Server related services on one or more computers. Will follow SQL Server service dependencies.\n\nRequires Local Admin rights on destination computer(s).",
        "Tags":  [
                     "Service",
                     "Stop"
                 ],
        "Params":  [
                       [
                           "ComputerName",
                           "The target SQL Server instance or instances.",
                           "cn,host,Server",
                           false,
                           "false",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "InstanceName",
                           "Only affects services that belong to the specific instances.",
                           "Instance",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Type",
                           "Use -Type to collect only services of the desired SqlServiceType.\r\nCan be one of the following: \"Agent\",\"Browser\",\"Engine\",\"FullText\",\"SSAS\",\"SSIS\",\"SSRS\"",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "A collection of services from Get-DbaService",
                           "ServiceCollection",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Timeout",
                           "How long to wait for the start/stop request completion before moving on. Specify 0 to wait indefinitely.",
                           "",
                           false,
                           "false",
                           "60"
                       ],
                       [
                           "Credential",
                           "Credential object used to connect to the computer as a different user.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Force",
                           "Use this switch to stop dependent services before proceeding with the specified service",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the cmdlet runs. The cmdlet is not run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before running the cmdlet.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Stop-DbaSqlService",
        "Author":  "Kirill Kravtsov (@nvarscar)",
        "Synopsis":  "Stops SQL Server services on a computer.",
        "Name":  "Stop-DbaService",
        "Links":  "https://dbatools.io/Stop-DbaService",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eStop-DbaService -ComputerName sqlserver2014a\nStops the SQL Server related services on computer sqlserver2014a.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e\u0027sql1\u0027,\u0027sql2\u0027,\u0027sql3\u0027| Get-DbaService | Stop-DbaService\nGets the SQL Server related services on computers sql1, sql2 and sql3 and stops them.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eStop-DbaService -ComputerName sql1,sql2 -Instance MSSQLSERVER\nStops the SQL Server services related to the default instance MSSQLSERVER on computers sql1 and sql2.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eStop-DbaService -ComputerName $MyServers -Type SSRS\nStops the SQL Server related services of type \"SSRS\" (Reporting Services) on computers in the variable MyServers.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eStop-DbaService -ComputerName sql1 -Type Engine -Force\nStops SQL Server database engine services on sql1 forcing dependent SQL Server Agent services to stop as well.",
        "Syntax":  "Stop-DbaService [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [-InstanceName \u003cString[]\u003e] [-Type \u003cString[]\u003e] [-Timeout \u003cInt32\u003e] [-Credential \u003cPSCredential\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nStop-DbaService [-InstanceName \u003cString[]\u003e] [-Type \u003cString[]\u003e] -InputObject \u003cObject[]\u003e [-Timeout \u003cInt32\u003e] [-Credential \u003cPSCredential\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Stop-DbaTrace",
        "Description":  "Stops SQL Server traces",
        "Tags":  [
                     "Security",
                     "Trace"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance",
                           "ServerInstance,SqlServer",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Id",
                           "A list of trace ids",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Internal parameter for piping",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Stops SQL Server traces",
        "Name":  "Stop-DbaTrace",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eStop-DbaTrace -SqlInstance sql2008\nStops all traces on sql2008\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eStop-DbaTrace -SqlInstance sql2008 -Id 1\nStops all trace with ID 1 on sql2008\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaTrace -SqlInstance sql2008 | Out-GridView -PassThru | Stop-DbaTrace\nStops selected traces on sql2008",
        "Syntax":  "Stop-DbaTrace [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Id] \u003cInt32[]\u003e] [[-InputObject] \u003cObject[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Stop-DbaXESession",
        "Description":  "This script stops Extended Events sessions on a SQL Server instance.",
        "Tags":  [
                     "ExtendedEvent",
                     "XE",
                     "XEvent"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2008 or higher.",
                           "ServerInstance,SqlServer",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Session",
                           "Specifies individual Extended Events sessions to stop.",
                           "Sessions",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "AllSessions",
                           "If this switch is enabled, all Extended Events sessions will be stopped except the packaged sessions AlwaysOn_health, system_health, telemetry_xevents.",
                           "",
                           true,
                           "false",
                           "False"
                       ],
                       [
                           "InputObject",
                           "Accepts the object output by Get-DbaXESession as the list of sessions to be stopped.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Doug Meyers",
        "Synopsis":  "Stops Extended Events sessions.",
        "Name":  "Stop-DbaXESession",
        "Links":  "https://dbatools.io/Stop-DbaXESession",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eStop-DbaXESession -SqlInstance sqlserver2012 -AllSessions\nStops all Extended Event Session on the sqlserver2014 instance.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eStop-DbaXESession -SqlInstance sqlserver2012 -Session xesession1,xesession2\nStops the xesession1 and xesession2 Extended Event sessions.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaXESession -SqlInstance sqlserver2012 -Session xesession1 | Stop-DbaXESession\nStops the sessions returned from the Get-DbaXESession function.",
        "Syntax":  "Stop-DbaXESession [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] -Session \u003cObject[]\u003e [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nStop-DbaXESession [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] -AllSessions [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nStop-DbaXESession -InputObject \u003cSession[]\u003e [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Stop-DbaXESmartTarget",
        "Description":  "Stops an XESmartTarget PowerShell job. Useful if you want to run a target, but not right now.",
        "Tags":  [
                     "ExtendedEvent",
                     "XE",
                     "XEvent"
                 ],
        "Params":  [
                       [
                           "InputObject",
                           "The XESmartTarget job object.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl) | SmartTarget by Gianluca Sartori (@spaghettidba)",
        "Synopsis":  "Stops an XESmartTarget PowerShell job. Useful if you want to run a target, but not right now.",
        "Name":  "Stop-DbaXESmartTarget",
        "Links":  "https://dbatools.io/Stop-DbaXESmartTarget\nhttps://github.com/spaghettidba/XESmartTarget/wiki",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaXESmartTarget | Stop-DbaXESmartTarget\nStops all XESmartTarget jobs.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaXESmartTarget | Where-Object Id -eq 2 | Stop-DbaXESmartTarget\nStops a specific XESmartTarget job.",
        "Syntax":  "Stop-DbaXESmartTarget [-InputObject] \u003cObject[]\u003e [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Suspend-DbaAgDbDataMovement",
        "Description":  "Suspends data movement for an availability group database on a SQL Server instance.",
        "Tags":  [
                     "AvailabilityGroup",
                     "HA",
                     "AG"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. Server version must be SQL Server version 2012 or higher.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the SqlInstance instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AvailabilityGroup",
                           "The availability group where the database movement will be suspended.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database or databases to suspend movement upon.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Enables piping from Get-DbaAgDatabase",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Suspends data movement for an availability group database on a SQL Server instance.",
        "Name":  "Suspend-DbaAgDbDataMovement",
        "Links":  "https://dbatools.io/Suspend-DbaAgDbDataMovement",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eSuspend-DbaAgDbDataMovement -SqlInstance sql2017a -AvailabilityGroup ag1 -Database db1, db2\nSuspends data movement on db1 and db2 to ag1 on sql2017a. Prompts for confirmation.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaAgDatabase -SqlInstance sql2017a, sql2019 | Out-GridView -Passthru | Suspend-DbaAgDbDataMovement -Confirm:$false\nSuspends data movement on the selected availability group databases. Does not prompt for confirmation.",
        "Syntax":  "Suspend-DbaAgDbDataMovement [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-AvailabilityGroup] \u003cString\u003e] [[-Database] \u003cString[]\u003e] [[-InputObject] \u003cAvailabilityDatabase[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Sync-DbaAvailabilityGroup",
        "Description":  "Syncs depdendent objects for availability groups. Such objects include:\n\nSpConfigure\nCustomErrors\nCredentials\nDatabaseMail\nLinkedServers\nLogins\nLoginPermissions\nSystemTriggers\nDatabaseOwner\nAgentCategory\nAgentOperator\nAgentAlert\nAgentProxy\nAgentSchedule\nAgentJob\n\nNote that any of these can be excluded. For specific object exclusions (such as a single job), using the underlying Copy-Dba* command will be required.\n\nThis command does not filter by which logins are in use by the ag databases or which linked servers are used. All objects that are not excluded will be copied like hulk smash.",
        "Tags":  "HA",
        "Params":  [
                       [
                           "Primary",
                           "The primary SQL Server instance. Server version must be SQL Server version 2012 or higher.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "PrimarySqlCredential",
                           "Login to the primary instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Secondary",
                           "The target SQL Server instance or instances. Server version must be SQL Server version 2012 or higher.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SecondarySqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "AvailabilityGroup",
                           "The name of the Availability Group.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Exclude",
                           "Exclude one or more objects to export\nSpConfigure\r\nCustomErrors\r\nCredentials\r\nDatabaseMail\r\nLinkedServers\r\nLogins\r\nLoginPermissions\r\nSystemTriggers\r\nDatabaseOwner\r\nAgentCategory\r\nAgentOperator\r\nAgentAlert\r\nAgentProxy\r\nAgentSchedule\r\nAgentJob",
                           "ExcludeType",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Login",
                           "Specific logins to sync. If unspecified, all logins will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeLogin",
                           "Specific logins to exclude when performing the sync. If unspecified, all logins will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Job",
                           "Specific jobs to sync. If unspecified, all logins will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeJob",
                           "Specific jobs to exclude when performing the sync. If unspecified, all logins will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Enables piping from Get-DbaAvailabilityGroup.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Force",
                           "If this switch is enabled, the objects will dropped and recreated on Destination.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Syncs depdendent objects such as jobs, logins and custom errors for availability groups",
        "Name":  "Sync-DbaAvailabilityGroup",
        "Links":  "https://dbatools.io/Sync-DbaAvailabilityGroup",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eSync-DbaAvailabilityGroup -Primary sql2016a -AvailabilityGroup db3\nSyncs the following on all replicas found in the db3 AG:\r\nSpConfigure, CustomErrors, Credentials, DatabaseMail, LinkedServers\r\nLogins, LoginPermissions, SystemTriggers, DatabaseOwner, AgentCategory,\r\nAgentOperator, AgentAlert, AgentProxy, AgentScheduleAgentJob\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaAvailabilityGroup -SqlInstance sql2016a | Sync-DbaAvailabilityGroup -ExcludeType LoginPermissions, LinkedServers -ExcludeLogin login1, login2 -Job job1, job2\nSyncs the following on all replicas found in the db3 AG:\r\nSpConfigure, CustomErrors, Credentials, DatabaseMail, Logins,\r\nSystemTriggers, DatabaseOwner, AgentCategory, AgentOperator\r\nAgentAlert, AgentProxy, AgentScheduleAgentJob.\nCopies all logins except for login1 and login2 and only syncs job1 and job2\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaAvailabilityGroup -SqlInstance sql2016a | Sync-DbaAvailabilityGroup -WhatIf\nShows what would happen if the command were to run but doesn\u0027t actually perform the action.",
        "Syntax":  "Sync-DbaAvailabilityGroup [[-Primary] \u003cDbaInstanceParameter\u003e] [[-PrimarySqlCredential] \u003cPSCredential\u003e] [[-Secondary] \u003cDbaInstanceParameter[]\u003e] [[-SecondarySqlCredential] \u003cPSCredential\u003e] [[-AvailabilityGroup] \u003cString\u003e] [[-Exclude] \u003cString[]\u003e] [[-Login] \u003cString[]\u003e] [[-ExcludeLogin] \u003cString[]\u003e] [[-Job] \u003cString[]\u003e] [[-ExcludeJob] \u003cString[]\u003e] [[-InputObject] \u003cAvailabilityGroup[]\u003e] [-Force] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Sync-DbaLoginPermission",
        "Description":  "Syncs only SQL Server login permissions, roles, etc. Does not add or drop logins. If a matching login does not exist on the destination, the login will be skipped. Credential removal is not currently supported for this operation.",
        "Tags":  [
                     "Migration",
                     "Login"
                 ],
        "Params":  [
                       [
                           "Source",
                           "Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SourceSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Destination",
                           "Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "DestinationSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Login",
                           "The login(s) to process. Options for this list are auto-populated from the server. If unspecified, all logins will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeLogin",
                           "The login(s) to exclude. Options for this list are auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Sync-DbaSqlLoginPermission,Sync-SqlLoginPermissions",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Copies SQL login permissions from one server to another.",
        "Name":  "Sync-DbaLoginPermission",
        "Links":  "https://dbatools.io/Sync-DbaLoginPermission",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eSync-DbaLoginPermission -Source sqlserver2014a -Destination sqlcluster\nSyncs only SQL Server login permissions, roles, etc. Does not add or drop logins or users. To copy logins and their permissions, use Copy-SqlLogin.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eSync-DbaLoginPermission -Source sqlserver2014a -Destination sqlcluster -Exclude realcajun -SourceSqlCredential $scred -DestinationSqlCredential $dcred\nCopies all login permissions except for realcajun using SQL Authentication to connect to each server. If a login already exists on the destination, the permissions will not be migrated.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eSync-DbaLoginPermission -Source sqlserver2014a -Destination sqlcluster -Login realcajun, netnerds\nCopies permissions ONLY for logins netnerds and realcajun.",
        "Syntax":  "Sync-DbaLoginPermission [-Source] \u003cDbaInstanceParameter\u003e [[-SourceSqlCredential] \u003cPSCredential\u003e] [-Destination] \u003cDbaInstanceParameter[]\u003e [[-DestinationSqlCredential] \u003cPSCredential\u003e] [[-Login] \u003cString[]\u003e] [[-ExcludeLogin] \u003cString[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Test-DbaBackupInformation",
        "Description":  "Input is normally from a backup history object generated from `Format-DbaBackupInformation`. This is then parse to check that it\u0027s valid for restore. Tests performed include:\n  - Checking unbroken LSN chain\n  - If the target database exists and WithReplace has been provided\n  - If any files already exist, but owned by other databases\n  - Creates any new folders required\n  - That the backup files exists at the location specified, and can be seen by the Sql Instance\n  - If no errors are found then the objects for that database will me marked as Verified",
        "Tags":  [
                     "Backup",
                     "Restore",
                     "DisasterRecovery"
                 ],
        "Params":  [
                       [
                           "BackupHistory",
                           "dbatools BackupHistory object. Normally this will have been process with `Select-` and then `Format-DbaBackupInformation`",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlInstance",
                           "The Sql Server instance that wil be performing the restore",
                           "ServerInstance,SqlServer",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "A Sql Credential to connect to $SqlInstance",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "WithReplace",
                           "By default we won\u0027t overwrite an existing database, this switch tells us you want to",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Continue",
                           "Switch to indicate a continuing restore",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "VerifyOnly",
                           "This switch indicates that you only wish to verify a restore, so runs a smaller number of tests as you won\u0027t be writing anything to the restore server",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "OutputScriptOnly",
                           "Switch to disable path creation. Will write a warning that a path does not exist",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the cmdlet runs. The cmdlet is not run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before running the cmdlet.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Stuart Moore (@napalmgram), stuart-moore.com",
        "Synopsis":  "Tests a dbatools backup history object is correct for restoring",
        "Name":  "Test-DbaBackupInformation",
        "Links":  "https://dbatools.io/Test-DbaBackupInformation",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003e$BackupHistory | Test-DbaBackupInformation -SqlInstance MyInstance\nPS C:\\\u003e $PassedDbs = $BackupHistory | Where-Object {$_.IsVerified -eq $True}\r\nPS C:\\\u003e $FailedDbs = $BackupHistory | Where-Object {$_.IsVerified -ne $True}\nPass in a BackupHistory object to be tested against MyInstance.\r\nThose records that pass are marked as verified. We can then use the IsVerified property to divide the failures and successes",
        "Syntax":  "Test-DbaBackupInformation [-BackupHistory] \u003cObject[]\u003e [[-SqlInstance] \u003cDbaInstanceParameter\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [-WithReplace] [-Continue] [-VerifyOnly] [-OutputScriptOnly] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Test-DbaBuild",
        "Description":  "Returns info about the specific build of a SQL instance, including the SP, the CU and the reference KB, End Of Support, wherever possible. It adds a Compliance property as true/false, and adds details about the \"targeted compliance\".",
        "Tags":  [
                     "SqlBuild",
                     "Version"
                 ],
        "Params":  [
                       [
                           "Build",
                           "Instead of connecting to a real instance, pass a string identifying the build to get the info back.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "MinimumBuild",
                           "This is the build version to test \"compliance\" against. Anything below this is flagged as not compliant.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "MaxBehind",
                           "Instead of using a specific MinimumBuild here you can pass \"how many service packs and cu back\" is the targeted compliance level. You can use xxSP or xxCU or both, where xx is a number. See the \r\nExamples for more information.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Latest",
                           "Shortcut for specifying the very most up-to-date build available.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "SqlInstance",
                           "Target any number of instances, in order to return their compliance state.",
                           "ServerInstance,SqlServer",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "When connecting to an instance, use the credentials specified.",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Update",
                           "Looks online for the most up to date reference, replacing the local one.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Quiet",
                           "Makes the function just return $true/$false. It\u0027s useful if you use Test-DbaBuild in your own scripts.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Test-DbaSqlBuild",
        "Author":  "Simone Bizzotto (@niphold) | Friedrich Weinmann (@FredWeinmann)",
        "Synopsis":  "Returns SQL Server Build \"compliance\" level on a build.",
        "Name":  "Test-DbaBuild",
        "Links":  "https://dbatools.io/Test-DbaBuild",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eTest-DbaBuild -Build \"12.0.5540\" -MinimumBuild \"12.0.5557\"\nReturns information about a build identified by \"12.0.5540\" (which is SQL 2014 with SP2 and CU4), which is not compliant as the minimum required\r\nbuild is \"12.0.5557\" (which is SQL 2014 with SP2 and CU8).\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eTest-DbaBuild -Build \"12.0.5540\" -MaxBehind \"1SP\"\nReturns information about a build identified by \"12.0.5540\", making sure it is AT MOST 1 Service Pack \"behind\". For that version,\r\nthat identifies an SP2, means accepting as the lowest compliance version as \"12.0.4110\", that identifies 2014 with SP1.\nOutput column CUTarget is not relevant (empty). SPTarget and BuildTarget are filled in the result.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eTest-DbaBuild -Build \"12.0.5540\" -MaxBehind \"1SP 1CU\"\nReturns information about a build identified by \"12.0.5540\", making sure it is AT MOST 1 Service Pack \"behind\", plus 1 CU \"behind\". For that version,\r\nthat identifies an SP2 and CU, rolling back 1 SP brings you to \"12.0.4110\", but given the latest CU for SP1 is CU13, the target \"compliant\" build\r\nwill be \"12.0.4511\", which is 2014 with SP1 and CU12.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eTest-DbaBuild -Build \"12.0.5540\" -MaxBehind \"0CU\"\nReturns information about a build identified by \"12.0.5540\", making sure it is the latest CU release.\nOutput columns CUTarget, SPTarget and BuildTarget are relevant. If the latest build is a service pack (not a CU), CUTarget will be empty.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eTest-DbaBuild -Build \"12.0.5540\" -Latest\nReturns information about a build identified by \"12.0.5540\", making sure it is the latest build available.\nOutput columns CUTarget and SPTarget are not relevant (empty), only the BuildTarget is.\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eTest-DbaBuild -Build \"12.00.4502\" -MinimumBuild \"12.0.4511\" -Update\nSame as before, but tries to fetch the most up to date index online. When the online version is newer, the local one gets overwritten.\n-------------------------- EXAMPLE 7 --------------------------\nPS C:\\\u003eTest-DbaBuild -Build \"12.0.4502\",\"10.50.4260\" -MinimumBuild \"12.0.4511\"\nReturns information builds identified by these versions strings.\n-------------------------- EXAMPLE 8 --------------------------\nPS C:\\\u003eGet-DbaCmsRegServer -SqlInstance sqlserver2014a | Test-DbaBuild -MinimumBuild \"12.0.4511\"\nIntegrate with other cmdlets to have builds checked for all your registered servers on sqlserver2014a.",
        "Syntax":  "Test-DbaBuild [[-Build] \u003cVersion[]\u003e] [[-MinimumBuild] \u003cVersion\u003e] [[-MaxBehind] \u003cString\u003e] [-Latest] [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [-Update] [-Quiet] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Test-DbaCmConnection",
        "Description":  "Tests over which paths a computer can be managed.\n\nThis function tries out the connectivity for:\n- Cim over WinRM\n- Cim over DCOM\n- Wmi\n- PowerShellRemoting\nResults will be written to the connectivity cache and will cause Get-DbaCmObject and Invoke-DbaCmMethod to connect using the way most likely to succeed. This way, it is likely the other commands will take less time to execute. These others too cache their results, in order to dynamically update connection statistics.\n\nThis function ignores global configuration settings limiting which protocols may be used.",
        "Tags":  [
                     "ComputerManagement",
                     "CIM"
                 ],
        "Params":  [
                       [
                           "ComputerName",
                           "The computer to test against.",
                           "",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "The credentials to use when running the test. Bad credentials are automatically cached as non-working. This behavior can be disabled by the \u0027Cache.Management.Disable.BadCredentialList\u0027 configuration.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Type",
                           "The connection protocol types to test.\r\nBy default, all types are tested.\nNote that this function will ignore global configurations limiting the types of connections available and test all connections specified here instead.\nAvailable connection protocol types: \"CimRM\", \"CimDCOM\", \"Wmi\", \"PowerShellRemoting\"",
                           "",
                           false,
                           "false",
                           "@(\"CimRM\", \"CimDCOM\", \"Wmi\", \"PowerShellRemoting\")"
                       ],
                       [
                           "Force",
                           "If this switch is enabled, the Alert will be dropped and recreated on Destination.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Friedrich Weinmann (@FredWeinmann)",
        "Synopsis":  "Tests over which paths a computer can be managed.",
        "Name":  "Test-DbaCmConnection",
        "Links":  "https://dbatools.io/Test-DbaCmConnection",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eTest-DbaCmConnection -ComputerName sql2014\nPerforms a full-spectrum connection test against the computer sql2014. The results will be reported and registered. Future calls from Get-DbaCmObject will recognize the results and optimize the query.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eTest-DbaCmConnection -ComputerName sql2014 -Credential $null -Type CimDCOM, CimRM\nThis test will run a connectivity test of CIM over DCOM and CIM over WinRM against the computer sql2014 using Windows Authentication.\nThe results will be reported and registered. Future calls from Get-DbaCmObject will recognize the results and optimize the query.",
        "Syntax":  "Test-DbaCmConnection [[-ComputerName] \u003cDbaCmConnectionParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [[-Type] {None | CimRM | CimDCOM | Wmi | PowerShellRemoting}] [-Force] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Test-DbaConnection",
        "Description":  "Tests the ability to connect to an SQL Server instance outputting information about the server and instance.",
        "Tags":  [
                     "CIM",
                     "Test",
                     "Connection"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The SQL Server Instance to test connection",
                           "ServerInstance,SqlServer",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Credential",
                           "Credential object used to connect to the Computer as a different user",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Test-SqlConnection",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Tests the connection to a single instance.",
        "Name":  "Test-DbaConnection",
        "Links":  "https://dbatools.io/Test-DbaConnection",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eTest-DbaConnection SQL2016\n```\r\nComputerName         : SQL2016\r\nInstanceName         : MSSQLSERVER\r\nSqlInstance          : sql2016\r\nSqlVersion           : 13.0.4001\r\nConnectingAsUser     : BASE\\ctrlb\r\nConnectSuccess       : True\r\nAuthType             : Windows Authentication\r\nAuthScheme           : KERBEROS\r\nTcpPort              : 1433\r\nIPAddress            : 10.2.1.5\r\nNetBiosName          : sql2016.base.local\r\nIsPingable           : True\r\nPSRemotingAccessible : True\r\nDomainName           : base.local\r\nLocalWindows         : 10.0.15063.0\r\nLocalPowerShell      : 5.1.15063.502\r\nLocalCLR             : 4.0.30319.42000\r\nLocalSMOVersion      : 13.0.0.0\r\nLocalDomainUser      : True\r\nLocalRunAsAdmin      : False\r\n```\nTest connection to SQL2016 and outputs information collected",
        "Syntax":  "Test-DbaConnection [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Test-DbaConnectionAuthScheme",
        "Description":  "By default, this command will return the ConnectName, ServerName, Transport and AuthScheme of the current connection.\n\nConnectName is the name you used to connect. ServerName is the name that the SQL Server reports as its @@SERVERNAME which is used to register its SPN. If you were expecting a Kerberos connection and got NTLM instead, ensure ConnectName and ServerName match.\n\nIf -Kerberos or -Ntlm is specified, the $true/$false results of the test will be returned. Returns $true or $false by default for one server. Returns Server name and Results for more than one server.",
        "Tags":  [
                     "SPN",
                     "Kerberos"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. Server(s) must be SQL Server 2005 or higher.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "Credential,Cred",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Kerberos",
                           "If this switch is enabled, checks will be made for Kerberos authentication.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Ntlm",
                           "If this switch is enabled, checks will be made for NTLM authentication.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Detailed",
                           "Output all properties, will be deprecated in 1.0.0 release.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Returns the transport protocol and authentication scheme of the connection. This is useful to determine if your connection is using Kerberos.",
        "Name":  "Test-DbaConnectionAuthScheme",
        "Links":  "https://dbatools.io/Test-DbaConnectionAuthScheme",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eTest-DbaConnectionAuthScheme -SqlInstance sqlserver2014a, sql2016\nReturns ConnectName, ServerName, Transport and AuthScheme for sqlserver2014a and sql2016.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eTest-DbaConnectionAuthScheme -SqlInstance sqlserver2014a -Kerberos\nReturns $true or $false depending on if the connection is Kerberos or not.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eTest-DbaConnectionAuthScheme -SqlInstance sqlserver2014a | Select-Object *\nReturns the results of \"SELECT * from sys.dm_exec_connections WHERE session_id = @@SPID\"",
        "Syntax":  "Test-DbaConnectionAuthScheme [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-Kerberos] [-Ntlm] [-Detailed] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Test-DbaDbCollation",
        "Description":  "Compares Database Collations to Server Collation",
        "Tags":  [
                     "Database",
                     "Collation"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Specifies the database(s) to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "Specifies the database(s) to exclude from processing. Options for this list are auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Detailed",
                           "Output all properties, will be deprecated in 1.0.0 release.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Test-DbaDatabaseCollation",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Compares Database Collations to Server Collation",
        "Name":  "Test-DbaDbCollation",
        "Links":  "https://dbatools.io/Test-DbaDbCollation",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eTest-DbaDbCollation -SqlInstance sqlserver2014a\nReturns server name, database name and true/false if the collations match for all databases on sqlserver2014a.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eTest-DbaDbCollation -SqlInstance sqlserver2014a -Database db1, db2\nReturns information for the db1 and db2 databases on sqlserver2014a.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eTest-DbaDbCollation -SqlInstance sqlserver2014a, sql2016 -Exclude db1\nReturns information for database and server collations for all databases except db1 on sqlserver2014a and sql2016.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaCmsRegServer -SqlInstance sql2016 | Test-DbaDbCollation\nReturns db/server collation information for every database on every server listed in the Central Management Server on sql2016.",
        "Syntax":  "Test-DbaDbCollation [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [-Detailed] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Test-DbaDbCompatibility",
        "Description":  "Compares Database Compatibility level to Server Compatibility",
        "Tags":  [
                     "Database",
                     "Compatibility"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Credential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Specifies the database(s) to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "Specifies the database(s) to exclude from processing. Options for this list are auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Detailed",
                           "Will be deprecated in 1.0.0 release.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Test-DbaDatabaseCompatibility",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Compares Database Compatibility level to Server Compatibility",
        "Name":  "Test-DbaDbCompatibility",
        "Links":  "https://dbatools.io/Test-DbaDbCompatibility",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eTest-DbaDbCompatibility -SqlInstance sqlserver2014a\nReturns server name, database name and true/false if the compatibility level match for all databases on sqlserver2014a.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eTest-DbaDbCompatibility -SqlInstance sqlserver2014a -Database db1, db2\nReturns detailed information for database and server compatibility level for the db1 and db2 databases on sqlserver2014a.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eTest-DbaDbCompatibility -SqlInstance sqlserver2014a, sql2016 -Exclude db1\nReturns detailed information for database and server compatibility level for all databases except db1 on sqlserver2014a and sql2016.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaCmsRegServer -SqlInstance sql2014 | Test-DbaDbCompatibility\nReturns db/server compatibility information for every database on every server listed in the Central Management Server on sql2016.",
        "Syntax":  "Test-DbaDbCompatibility [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-Credential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [-Detailed] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Test-DbaDbCompression",
        "Description":  "This function returns the results of a full table/index compression analysis and the estimated, best option to date for either NONE, Page, or Row Compression.\n\nRemember Uptime is critical, the longer uptime, the more accurate the analysis is, and it would be best if you utilized Get-DbaUptime first, before running this command.\n\nTest-DbaDbCompression script derived from GitHub and the tigertoolbox\n(https://github.com/Microsoft/tigertoolbox/tree/master/Evaluate-Compression-Gains)\nIn the output, you will find the following information:\n- Column Percent_Update shows the percentage of update operations on a specific table, index, or partition, relative to total operations on that object. The lower the percentage of Updates (that is, the table, index, or partition is infrequently updated), the better candidate it is for page compression.\n- Column Percent_Scan shows the percentage of scan operations on a table, index, or partition, relative to total operations on that object. The higher the value of Scan (that is, the table, index, or partition is mostly scanned), the better candidate it is for page compression.\n- Column Compression_Type_Recommendation can have four possible outputs indicating where there is most gain, if any: \u0027PAGE\u0027, \u0027ROW\u0027, \u0027NO_GAIN\u0027 or \u0027?\u0027. When the output is \u0027?\u0027 this approach could not give a recommendation, so as a rule of thumb I would lean to ROW if the object suffers mainly UPDATES, or PAGE if mainly INSERTS, but this is where knowing your workload is essential. When the output is \u0027NO_GAIN\u0027 well, that means that according to sp_estimate_data_compression_savings no space gains will be attained when compressing, as in the above output example, where compressing would grow the affected object.\n\nThis script will execute on the context of the current database.\nAlso be aware that this may take a while to execute on large objects, because if the IS locks taken by the\nsp_estimate_data_compression_savings cannot be honored, the SP will be blocked.\nIt only considers Row or Page Compression (not column compression)\nIt only evaluates User Tables",
        "Tags":  [
                     "Compression",
                     "Table",
                     "Database"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Schema",
                           "Filter to only get specific schemas If unspecified, all schemas will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Table",
                           "Filter to only get specific tables If unspecified, all User tables will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ResultSize",
                           "Allows you to limit the number of results returned, as some systems can have very large number of tables.  Default value is no restriction.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "Rank",
                           "Allows you to specify the field used for ranking when determining the ResultSize\r\nCan be either TotalPages, UsedPages or TotalRows with default of TotalPages. Only applies when ResultSize is used.",
                           "",
                           false,
                           "false",
                           "TotalPages"
                       ],
                       [
                           "FilterBy",
                           "Allows you to specify level of filtering when determining the ResultSize\r\nCan be at either Table, Index or Partition level with default of Partition. Only applies when ResultSize is used.",
                           "",
                           false,
                           "false",
                           "Partition"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Jason Squires (@js_0505), [email protected]",
        "Synopsis":  "Returns tables and indexes with preferred compression setting.",
        "Name":  "Test-DbaDbCompression",
        "Links":  "https://dbatools.io/Test-DbaDbCompression",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eTest-DbaDbCompression -SqlInstance localhost\nReturns results of all potential compression options for all databases for the default instance on the local host. Returns a recommendation of either Page, Row or NO_GAIN\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eTest-DbaDbCompression -SqlInstance ServerA\nReturns results of all potential compression options for all databases on the instance ServerA\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eTest-DbaDbCompression -SqlInstance ServerA -Database DBName | Out-GridView\nReturns results of all potential compression options for a single database DBName with the recommendation of either Page or Row or NO_GAIN in a nicely formatted GridView\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003e$cred = Get-Credential sqladmin\nPS C:\\\u003e Test-DbaDbCompression -SqlInstance ServerA -ExcludeDatabase MyDatabase -SqlCredential $cred\nReturns results of all potential compression options for all databases except MyDatabase on instance ServerA using SQL credentials to authentication to ServerA.\r\nReturns the recommendation of either Page, Row or NO_GAIN\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eTest-DbaDbCompression -SqlInstance ServerA -Schema Test -Table MyTable\nReturns results of all potential compression options for the Table Test.MyTable in instance ServerA on ServerA and ServerB.\r\nReturns the recommendation of either Page, Row or NO_GAIN.\r\nReturns a result for each partition of any Heap, Clustered or NonClustered index.\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eTest-DbaDbCompression -SqlInstance ServerA, ServerB -ResultSize 10\nReturns results of all potential compression options for all databases on ServerA and ServerB.\r\nReturns the recommendation of either Page, Row or NO_GAIN.\r\nReturns results for the top 10 partitions by TotalPages used per database.\n-------------------------- EXAMPLE 7 --------------------------\nPS C:\\\u003eServerA | Test-DbaDbCompression -Schema Test -ResultSize 10 -Rank UsedPages -FilterBy Table\nReturns results of all potential compression options for all databases on ServerA containing a schema Test\r\nReturns results for the top 10 Tables by Used Pages per database.\r\nResults are split by Table, Index and Partition so more than 10 results may be returned.\n-------------------------- EXAMPLE 8 --------------------------\nPS C:\\\u003e$servers = \u0027Server1\u0027,\u0027Server2\u0027\nPS C:\\\u003e $servers | Test-DbaDbCompression -Database DBName | Out-GridView\nReturns results of all potential compression options for a single database DBName on Server1 or Server2\r\nReturns the recommendation of either Page, Row or NO_GAIN in a nicely formatted GridView\n-------------------------- EXAMPLE 9 --------------------------\nPS C:\\\u003e$cred = Get-Credential sqladmin\nPS C:\\\u003e Test-DbaDbCompression -SqlInstance ServerA -Database MyDB -SqlCredential $cred -Schema Test -Table Test1, Test2\nReturns results of all potential compression options for objects in Database MyDb on instance ServerA using SQL credentials to authentication to ServerA.\r\nReturns the recommendation of either Page, Row or NO_GAIN for tables with SchemA Test and name in Test1 or Test2\n-------------------------- EXAMPLE 10 --------------------------\nPS C:\\\u003e$servers = \u0027Server1\u0027,\u0027Server2\u0027\nPS C:\\\u003e foreach ($svr in $servers) {\r\n\u003e\u003e Test-DbaDbCompression -SqlInstance $svr | Export-Csv -Path C:\\temp\\CompressionAnalysisPAC.csv -Append\r\n\u003e\u003e }\nThis produces a full analysis of all your servers listed and is pushed to a csv for you to analyze.",
        "Syntax":  "Test-DbaDbCompression [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [[-Schema] \u003cString[]\u003e] [[-Table] \u003cString[]\u003e] [[-ResultSize] \u003cInt32\u003e] [[-Rank] \u003cString\u003e] [[-FilterBy] \u003cString\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Test-DbaDbLogShipStatus",
        "Description":  "Most of the time your log shipping \"just works\".\nChecking your log shipping status can be done really easy with this function.\n\nMake sure you\u0027re connecting to the monitoring instance of your log shipping infrastructure.\n\nThe function will return the status for a database. This can be one or more messages in a comma separated list.\nIf everything is OK with the database than you should only see the message \"All OK\".",
        "Tags":  "LogShipping",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2000 or greater.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Allows you to filter the results to only return the databases you\u0027re interested in. This can be one or more values separated by commas.\r\nThis is not a wildcard and should be the exact database name. See examples for more info.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "Allows you to filter the results to only return the databases you\u0027re not interested in. This can be one or more values separated by commas.\r\nThis is not a wildcard and should be the exact database name.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Simple",
                           "By default all the information will be returned.\r\nIf this parameter is used you get an overview with the SQL Instance, Database, Instance Type and the status",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Primary",
                           "Allows to filter the results to only return values that apply to the primary instance.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Secondary",
                           "Allows to filter the results to only return values that apply to the secondary instance.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Test-DbaLogShippingStatus",
        "Author":  "Sander Stad (@sqlstad), sqlstad.nl",
        "Synopsis":  "Test-DbaDbLogShipStatus returns the status of your log shipping databases",
        "Name":  "Test-DbaDbLogShipStatus",
        "Links":  "https://dbatools.io/Test-DbaDbLogShipStatus",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eTest-DbaDbLogShipStatus -SqlInstance sql1\nRetrieves the log ship information from sql1 and displays all the information present including the status.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eTest-DbaDbLogShipStatus -SqlInstance sql1 -Database AdventureWorks2014\nRetrieves the log ship information for just the database AdventureWorks.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eTest-DbaDbLogShipStatus -SqlInstance sql1 -Primary\nRetrieves the log ship information and only returns the information for the databases on the primary instance.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eTest-DbaDbLogShipStatus -SqlInstance sql1 -Secondary\nRetrieves the log ship information and only returns the information for the databases on the secondary instance.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eTest-DbaDbLogShipStatus -SqlInstance sql1 -Simple\nRetrieves the log ship information and only returns the columns SQL Instance, Database, Instance Type and Status",
        "Syntax":  "Test-DbaDbLogShipStatus [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cString[]\u003e] [[-ExcludeDatabase] \u003cString[]\u003e] [-Simple] [-Primary] [-Secondary] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Test-DbaDbOwner",
        "Description":  "This function will check all databases on an instance against a SQL login to validate if that\nlogin owns those databases or not. By default, the function will check against \u0027sa\u0027 for\nownership, but the user can pass a specific login if they use something else.\n\nBest Practice reference: http://weblogs.sqlteam.com/dang/archive/2008/01/13/Database-Owner-Troubles.aspx",
        "Tags":  [
                     "Database",
                     "Owner",
                     "DbOwner"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Specifies the database(s) to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "Specifies the database(s) to exclude from processing. Options for this list are auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "TargetLogin",
                           "Specifies the login that you wish check for ownership. This defaults to \u0027sa\u0027 or the sysadmin name if sa was renamed. This must be a valid security principal which exists on the target server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Detailed",
                           "Will be deprecated in 1.0.0 release.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "InputObject",
                           "Enables piped input from Get-DbaDatabase.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Test-DbaDatabaseOwner",
        "Author":  "Michael Fal (@Mike_Fal), http://mikefal.net",
        "Synopsis":  "Checks database owners against a login to validate which databases do not match that owner.",
        "Name":  "Test-DbaDbOwner",
        "Links":  "https://dbatools.io/Test-DbaDbOwner",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eTest-DbaDbOwner -SqlInstance localhost\nReturns all databases where the owner does not match \u0027sa\u0027.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eTest-DbaDbOwner -SqlInstance localhost -TargetLogin \u0027DOMAIN\\account\u0027\nReturns all databases where the owner does not match \u0027DOMAIN\\account\u0027.",
        "Syntax":  "Test-DbaDbOwner [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [[-TargetLogin] \u003cString\u003e] [-Detailed] [[-InputObject] \u003cDatabase[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Test-DbaDbRecoveryModel",
        "Description":  "When you switch a database into FULL recovery model, it will behave like a SIMPLE recovery model until a full backup is taken in order to begin a log backup chain.\n\nHowever, you may also desire to validate if a database is SIMPLE or BULK LOGGED on an instance.\n\nInspired by Paul Randal\u0027s post (http://www.sqlskills.com/blogs/paul/new-script-is-that-database-really-in-the-full-recovery-mode/)",
        "Tags":  [
                     "DisasterRecovery",
                     "Backup"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Database",
                           "Specifies the database(s) to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "Specifies the database(s) to exclude from processing. Options for this list are auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "RecoveryModel",
                           "Specifies the type of recovery model you wish to test. By default it will test for FULL Recovery Model.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Detailed",
                           "Output all properties, will be deprecated in 1.0.0 release.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Test-DbaFullRecoveryModel,Test-DbaRecoveryModel",
        "Author":  "Claudio Silva (@ClaudioESSilva)",
        "Synopsis":  "Find if database is really a specific recovery model or not.",
        "Name":  "Test-DbaDbRecoveryModel",
        "Links":  "https://dbatools.io/Test-DbaDbRecoveryModel",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eTest-DbaDbRecoveryModel -SqlInstance sql2005\nShows all databases where the configured recovery model is FULL and indicates whether or not they are really in FULL recovery model.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eTest-DbaDbRecoveryModel -SqlInstance . | Where-Object {$_.ActualRecoveryModel -ne \"FULL\"}\nOnly shows the databases that are functionally in \u0027simple\u0027 mode.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eTest-DbaDbRecoveryModel -SqlInstance sql2008 -RecoveryModel Bulk_Logged | Sort-Object Server  -Descending\nShows all databases where the configured recovery model is BULK_LOGGED and sort them by server name descending\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eTest-DbaDbRecoveryModel -SqlInstance localhost | Select-Object -Property *\nShows all of the properties for the databases that have Full Recovery Model",
        "Syntax":  "Test-DbaDbRecoveryModel [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-RecoveryModel] \u003cObject\u003e] [-Detailed] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Test-DbaDbVirtualLogFile",
        "Description":  "Having a transaction log file with too many virtual log files (VLFs) can hurt database performance.\n\nToo many VLFs can cause transaction log backups to slow down and can also slow down database recovery and, in extreme cases, even affect insert/update/delete performance.\n\nReferences:\nhttp://www.sqlskills.com/blogs/kimberly/transaction-log-vlfs-too-many-or-too-few/\nhttp://blogs.msdn.com/b/saponsqlserver/archive/2012/02/22/too-many-virtual-log-files-vlfs-can-cause-slow-database-recovery.aspx\n\nIf you\u0027ve got a high number of VLFs, you can use Expand-SqlTLogResponsibly to reduce the number.",
        "Tags":  [
                     "VLF",
                     "Database"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Specifies the database(s) to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "Specifies the database(s) to exclude from processing. Options for this list are auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "IncludeSystemDBs",
                           "If this switch is enabled, system database information will be displayed.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Test-DbaVirtualLogFile",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Returns calculations on the database virtual log files for database on a SQL instance.",
        "Name":  "Test-DbaDbVirtualLogFile",
        "Links":  "https://dbatools.io/Test-DbaDbVirtualLogFile",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eTest-DbaDbVirtualLogFile -SqlInstance sqlcluster\nReturns all user database virtual log file counts for the sqlcluster instance.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eTest-DbaDbVirtualLogFile -SqlInstance sqlserver | Where-Object {$_.Count -ge 50}\nReturns user databases that have 50 or more VLFs.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003e@(\u0027sqlserver\u0027,\u0027sqlcluster\u0027) | Test-DbaDbVirtualLogFile\nReturns all VLF information for the sqlserver and sqlcluster SQL Server instances. Processes data via the pipeline.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eTest-DbaDbVirtualLogFile -SqlInstance sqlcluster -Database db1, db2\nReturns VLF counts for the db1 and db2 databases on sqlcluster.",
        "Syntax":  "Test-DbaDbVirtualLogFile [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [-IncludeSystemDBs] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Test-DbaDeprecatedFeature",
        "Description":  "Displays information relating to deprecated features for SQL Server 2005 and above.",
        "Tags":  "Deprecated",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance",
                           "ServerInstance,SqlServer,SqlServers",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternate Windows or SQL Login Authentication. Accepts credential objects (Get-Credential).",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "A collection of databases (such as returned by Get-DbaDatabase), to be tested.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Displays information relating to deprecated features for SQL Server 2005 and above.",
        "Name":  "Test-DbaDeprecatedFeature",
        "Links":  "https://dbatools.io/Test-DbaDeprecatedFeature",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbaDatabase -SqlInstance sql2008 -Database testdb, db2 | Test-DbaDeprecatedFeature\nCheck deprecated features on server sql2008 for only the testdb and db2 databases\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaDatabase -SqlInstance sql2008 -Database testdb, db2 | Test-DbaDeprecatedFeature | Select *\nSee the object definition in the output as well\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eTest-DbaDeprecatedFeature -SqlInstance sql2008, sqlserver2012\nCheck deprecated features for all databases on the servers sql2008 and sqlserver2012.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eTest-DbaDeprecatedFeature -SqlInstance sql2008 -Database TestDB\nCheck deprecated features on server sql2008 for only the TestDB database",
        "Syntax":  "Test-DbaDeprecatedFeature [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cString[]\u003e] [[-ExcludeDatabase] \u003cString[]\u003e] [[-InputObject] \u003cDatabase[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Test-DbaDiskAlignment",
        "Description":  "Returns $true or $false by default for one server. Returns Server name and IsBestPractice for more than one server.\n\nPlease refer to your storage vendor best practices before following any advice below.\n\nBy default issues with disk alignment should be resolved by a new installation of Windows Server 2008, Windows Vista, or later operating systems, but verifying disk alignment continues to be recommended as a best practice.\nWhile some versions of Windows use different starting alignments, if you are starting anew 1MB is generally the best practice offset for current operating systems (because it ensures that the partition offset % common stripe unit sizes == 0 )\n\nCaveats:\n* Dynamic drives (or those provisioned via third party software) may or may not have accurate results when polled by any of the built in tools, see your vendor for details.\n* Windows does not have a reliable way to determine stripe unit Sizes. These values are obtained from vendor disk management software or from your SAN administrator.\n* System drives in versions previous to Windows Server 2008 cannot be aligned, but it is generally not recommended to place SQL Server databases on system drives.",
        "Tags":  "Storage",
        "Params":  [
                       [
                           "ComputerName",
                           "The target computer or computers.",
                           "ServerInstance,SqlServer,SqlInstance",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Credential",
                           "Specifies an alternate Windows account to use when enumerating drives on the server. May require Administrator privileges. To use:\n$cred = Get-Credential, then pass $cred object to the -Credential parameter.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "NoSqlCheck",
                           "If this switch is enabled, the disk(s) will not be checked for SQL Server data or log files.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Constantine Kokkinos (@mobileck), https://constantinekokkinos.com",
        "Synopsis":  "Verifies that your non-dynamic disks are aligned according to physical constraints.",
        "Name":  "Test-DbaDiskAlignment",
        "Links":  "https://dbatools.io/Test-DbaDiskAlignment",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eTest-DbaDiskAlignment -ComputerName sqlserver2014a\nTests the disk alignment of a single server named sqlserver2014a\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eTest-DbaDiskAlignment -ComputerName sqlserver2014a, sqlserver2014b, sqlserver2014c\nTests the disk alignment of multiple servers",
        "Syntax":  "Test-DbaDiskAlignment [-ComputerName] \u003cDbaInstanceParameter[]\u003e [[-Credential] \u003cPSCredential\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [-NoSqlCheck] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Test-DbaDiskAllocation",
        "Description":  "Checks all disks on a computer for disk allocation units that match best practice recommendations. If one server is checked, only $true or $false is returned. If multiple servers are checked, each server\u0027s name and an IsBestPractice field are returned.\n\nReferences:\nhttps://technet.microsoft.com/en-us/library/dd758814(v=sql.100).aspx - \"The performance question here is usually not one of correlation per the formula, but whether the cluster size has been explicitly defined at 64 KB, which is a best practice for SQL Server.\"",
        "Tags":  [
                     "CIM",
                     "Storage"
                 ],
        "Params":  [
                       [
                           "ComputerName",
                           "The server(s) to check disk configuration on.",
                           "ServerInstance,SqlServer,SqlInstance",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "NoSqlCheck",
                           "If this switch is enabled, the disk(s) will not be checked for SQL Server data or log files.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Credential",
                           "Specifies an alternate Windows account to use when enumerating drives on the server. May require Administrator privileges. To use:\n$cred = Get-Credential, then pass $cred object to the -Credential parameter.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Detailed",
                           "Output all properties, will be deprecated in 1.0.0 release.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Test-SqlDiskAllocation",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Checks all disks on a computer to see if they are formatted with allocation units of 64KB.",
        "Name":  "Test-DbaDiskAllocation",
        "Links":  "https://dbatools.io/Test-DbaDiskAllocation",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eTest-DbaDiskAllocation -ComputerName sqlserver2014a\nScans all disks on server sqlserver2014a for best practice allocation unit size.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eTest-DbaDiskAllocation -ComputerName sqlserver2014 | Select-Output *\nScans all disks on server sqlserver2014a for allocation unit size and returns detailed results for each.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eTest-DbaDiskAllocation -ComputerName sqlserver2014a -NoSqlCheck\nScans all disks not hosting SQL Server data or log files on server sqlserver2014a for best practice allocation unit size.",
        "Syntax":  "Test-DbaDiskAllocation [-ComputerName] \u003cObject[]\u003e [-NoSqlCheck] [[-SqlCredential] \u003cPSCredential\u003e] [[-Credential] \u003cPSCredential\u003e] [-Detailed] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Test-DbaDiskSpeed",
        "Description":  "Tests how disks are performing.\n\nThis command uses a query from Rich Benner which was adapted from David Pless\u0027s article:\nhttps://blogs.msdn.microsoft.com/dpless/2010/12/01/leveraging-sys-dm_io_virtual_file_stats/\nhttps://github.com/RichBenner/PersonalCode/blob/master/Disk_Speed_Check.sql",
        "Tags":  "Performance",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer,SqlServers",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to login to the SQL Server using alternative credentials.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Tests how disks are performing.",
        "Name":  "Test-DbaDiskSpeed",
        "Links":  "https://dbatools.io/Test-DbaDiskSpeed",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eTest-DbaDiskSpeed -SqlInstance sql2008, sqlserver2012\nTests how disks are performing on sql2008 and sqlserver2012.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eTest-DbaDiskSpeed -SqlInstance sql2008 -Database tempdb\nTests how disks storing tempdb files on sql2008 are performing.",
        "Syntax":  "Test-DbaDiskSpeed [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Database \u003cObject[]\u003e] [-ExcludeDatabase \u003cObject[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Test-DbaEndpoint",
        "Description":  "Performs a simple connectivity test for TCP and SSL enabled endpoints. Tests if port is accessible, not if endpoint is working.\n\nNote that if an endpoint does not have a tcp listener port, it will be skipped.",
        "Tags":  "Endpoint",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Endpoint",
                           "Test only specific endpoint or endpoints.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Enables piping from Get-DbaEndpoint.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Performs a simple connectivity test for TCP and SSL enabled endpoints.",
        "Name":  "Test-DbaEndpoint",
        "Links":  "https://dbatools.io/Test-DbaEndpoint",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eTest-DbaEndpoint -SqlInstance localhost\nTests all endpoints on the local default SQL Server instance.\nNote that if an endpoint does not have a tcp listener port, it will be skipped.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaEndpoint -SqlInstance localhost, sql2016 -Endpoint Mirror | Test-DbaEndpoint\nTests all endpoints named Mirroring on sql2016 and localhost.\nNote that if an endpoint does not have a tcp listener port, it will be skipped.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eTest-DbaEndpoint -SqlInstance localhost, sql2016 -Endpoint Mirror\nTests all endpoints named Mirroring on sql2016 and localhost.\nNote that if an endpoint does not have a tcp listener port, it will be skipped.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eTest-DbaEndpoint -SqlInstance localhost -Verbose\nTests all endpoints on the local default SQL Server instance.\nSee all endpoints that were skipped due to not having a tcp listener port.",
        "Syntax":  "Test-DbaEndpoint [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Endpoint] \u003cString[]\u003e] [[-InputObject] \u003cEndpoint[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Test-DbaIdentityUsage",
        "Description":  "IDENTITY seeds have max values based off of their data type.  This module will locate identity columns and report the seed usage.",
        "Tags":  [
                     "Identity",
                     "Table",
                     "Column"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer,SqlServers",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude - this list is auto-populated from the server",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Threshold",
                           "Allows you to specify a minimum % of the seed range being utilized.  This can be used to ignore seeds that have only utilized a small fraction of the range.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "ExcludeSystem",
                           "Allows you to suppress output on system databases",
                           "ExcludeSystemDb",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Brandon Abshire, netnerds.net",
        "Synopsis":  "Displays information relating to IDENTITY seed usage.  Works on SQL Server 2008 and above.",
        "Name":  "Test-DbaIdentityUsage",
        "Links":  "https://dbatools.io/Test-DbaIdentityUsage",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eTest-DbaIdentityUsage -SqlInstance sql2008, sqlserver2012\nCheck identity seeds for servers sql2008 and sqlserver2012.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eTest-DbaIdentityUsage -SqlInstance sql2008 -Database TestDB\nCheck identity seeds on server sql2008 for only the TestDB database\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eTest-DbaIdentityUsage -SqlInstance sql2008 -Database TestDB -Threshold 20\nCheck identity seeds on server sql2008 for only the TestDB database, limiting results to 20% utilization of seed range or higher",
        "Syntax":  "Test-DbaIdentityUsage [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Database \u003cObject[]\u003e] [-ExcludeDatabase \u003cObject[]\u003e] [[-Threshold] \u003cInt32\u003e] [[-ExcludeSystem]] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Test-DbaLastBackup",
        "Description":  "Restores all or some of the latest backups and performs a DBCC CHECKDB.\n\n1. Gathers information about the last full backups\n2. Restores the backups to the Destination with a new name. If no Destination is specified, the originating SQL Server instance wil be used.\n3. The database is restored as \"dbatools-testrestore-$databaseName\" by default, but you can change dbatools-testrestore to whatever you would like using -Prefix\n4. The internal file names are also renamed to prevent conflicts with original database\n5. A DBCC CHECKDB is then performed\n6. And the test database is finally dropped",
        "Tags":  [
                     "DisasterRecovery",
                     "Backup",
                     "Restore"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. Unlike many of the other commands, you cannot specify more than one server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database backups to test. If -Database is not provided, all database backups will be tested.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "Exclude specific Database backups to test.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Destination",
                           "The destination server to use to test the restore. By default, the Destination will be set to the source server\nIf a different Destination server is specified, you must ensure that the database backups are on a shared location",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "DestinationCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "DataDirectory",
                           "Specifies an alternative directory for mdfs, ndfs and so on. The command uses the SQL Server\u0027s default data directory for all restores.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "LogDirectory",
                           "Specifies an alternative directory for ldfs. The command uses the SQL Server\u0027s default log directory for all restores.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Prefix",
                           "The database is restored as \"dbatools-testrestore-$databaseName\" by default. You can change dbatools-testrestore to whatever you would like using this parameter.",
                           "",
                           false,
                           "false",
                           "dbatools-testrestore-"
                       ],
                       [
                           "VerifyOnly",
                           "If this switch is enabled, VERIFYONLY will be performed. An actual restore will not be executed.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "NoCheck",
                           "If this switch is enabled, DBCC CHECKDB will be skipped",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "NoDrop",
                           "If this switch is enabled, the newly-created test database will not be dropped.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "CopyFile",
                           "If this switch is enabled, the backup file will be copied to the destination default backup location unless CopyPath is specified.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "CopyPath",
                           "Specifies a path relative to the SQL Server to copy backups when CopyFile is specified. If not specified will use destination default backup location. If destination SQL Server is not local, admin \r\nUNC paths will be utilized for the copy.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "MaxSize",
                           "Max size in MB. Databases larger than this value will not be restored.",
                           "MaxMB",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "IncludeCopyOnly",
                           "If this switch is enabled, copy only backups will not be counted as a last backup.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "IgnoreLogBackup",
                           "If this switch is enabled, transaction log backups will be ignored. The restore will stop at the latest full or differential backup point.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "AzureCredential",
                           "The name of the SQL Server credential on the destination instance that holds the key to the azure storage account.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Enables piping from Get-DbaDatabase",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Quickly and easily tests the last set of full backups for a server.",
        "Name":  "Test-DbaLastBackup",
        "Links":  "https://dbatools.io/Test-DbaLastBackup",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eTest-DbaLastBackup -SqlInstance sql2016\nDetermines the last full backup for ALL databases, attempts to restore all databases (with a different name and file structure), then performs a DBCC CHECKDB. Once the test is complete, the test \r\nrestore will be dropped.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eTest-DbaLastBackup -SqlInstance sql2016 -Database SharePoint_Config\nDetermines the last full backup for SharePoint_Config, attempts to restore it, then performs a DBCC CHECKDB.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaDatabase -SqlInstance sql2016, sql2017 | Test-DbaLastBackup\nTests every database backup on sql2016 and sql2017\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaDatabase -SqlInstance sql2016, sql2017 -Database SharePoint_Config | Test-DbaLastBackup\nTests the database backup for the SharePoint_Config database on sql2016 and sql2017\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eTest-DbaLastBackup -SqlInstance sql2016 -Database model, master -VerifyOnly\nSkips performing an action restore of the database and simply verifies the backup using VERIFYONLY option of the restore.\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003eTest-DbaLastBackup -SqlInstance sql2016 -NoCheck -NoDrop\nSkips the DBCC CHECKDB check. This can help speed up the tests but makes it less tested. The test restores will remain on the server.\n-------------------------- EXAMPLE 7 --------------------------\nPS C:\\\u003eTest-DbaLastBackup -SqlInstance sql2016 -DataDirectory E:\\bigdrive -LogDirectory L:\\bigdrive -MaxSize 10240\nRestores data and log files to alternative locations and only restores databases that are smaller than 10 GB.\n-------------------------- EXAMPLE 8 --------------------------\nPS C:\\\u003eTest-DbaLastBackup -SqlInstance sql2014 -Destination sql2016 -CopyFile\nCopies the backup files for sql2014 databases to sql2016 default backup locations and then attempts restore from there.\n-------------------------- EXAMPLE 9 --------------------------\nPS C:\\\u003eTest-DbaLastBackup -SqlInstance sql2014 -Destination sql2016 -CopyFile -CopyPath \"\\\\BackupShare\\TestRestore\\\"\nCopies the backup files for sql2014 databases to sql2016 default backup locations and then attempts restore from there.",
        "Syntax":  "Test-DbaLastBackup [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [[-Destination] \u003cDbaInstanceParameter\u003e] [[-DestinationCredential] \u003cObject\u003e] [[-DataDirectory] \u003cString\u003e] [[-LogDirectory] \u003cString\u003e] [[-Prefix] \u003cString\u003e] [-VerifyOnly] [-NoCheck] [-NoDrop] [-CopyFile] [[-CopyPath] \u003cString\u003e] [[-MaxSize] \u003cInt32\u003e] [-IncludeCopyOnly] [-IgnoreLogBackup] [[-AzureCredential] \u003cString\u003e] [[-InputObject] \u003cDatabase[]\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Test-DbaLinkedServerConnection",
        "Description":  "Test each linked server on the instance",
        "Tags":  "LinkedServer",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Credential object used to connect to the SQL Server as a different user",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Thomas LaRock ( https://thomaslarock.com )",
        "Synopsis":  "Test all linked servers from the sql servers passed",
        "Name":  "Test-DbaLinkedServerConnection",
        "Links":  "https://dbatools.io/Test-DbaLinkedServerConnection",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eTest-DbaLinkedServerConnection -SqlInstance DEV01\nTest all Linked Servers for the SQL Server instance DEV01\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eTest-DbaLinkedServerConnection -SqlInstance sql2016 | Out-File C:\\temp\\results.txt\nTest all Linked Servers for the SQL Server instance sql2016 and output results to file\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eTest-DbaLinkedServerConnection -SqlInstance sql2016, sql2014, sql2012\nTest all Linked Servers for the SQL Server instances sql2016, sql2014 and sql2012\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003e$servers = \"sql2016\",\"sql2014\",\"sql2012\"\nPS C:\\\u003e $servers | Test-DbaLinkedServerConnection -SqlCredential sqladmin\nTest all Linked Servers for the SQL Server instances sql2016, sql2014 and sql2012 using SQL login credentials\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003e$servers | Get-DbaLinkedServer | Test-DbaLinkedServerConnection\nTest all Linked Servers for the SQL Server instances sql2016, sql2014 and sql2012",
        "Syntax":  "Test-DbaLinkedServerConnection [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Test-DbaLoginPassword",
        "Description":  "The purpose of this function is to find SQL Server logins that have no password or the same password as login. You can add your own password to check for or add them to a csv file.\nBy default it will test for empty password and the same password as username.",
        "Tags":  [
                     "Login",
                     "Security"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The SQL Server instance you\u0027re checking logins on. You must have sysadmin access and server version must be SQL Server version 2008 or higher.",
                           "ServerInstance,SqlServer,SqlServers",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Allows you to login to servers using SQL Logins instead of Windows Authentication (AKA Integrated or Trusted). To use:\n$scred = Get-Credential, then pass $scred object to the -SqlCredential parameter.\nWindows Authentication will be used if SqlCredential is not specified. SQL Server does not accept Windows credentials being passed as credentials.\nTo connect as a different Windows user, run PowerShell as that user.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Login",
                           "The login(s) to process.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Dictionary",
                           "Specifies a list of passwords to include in the test for weak passwords.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Allows piping from Get-DbaLogin.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Peter Samuelsson",
        "Synopsis":  "Test-DbaLoginPassword finds any logins on SQL instance that are SQL Logins and have a password that is either null or same as the login",
        "Name":  "Test-DbaLoginPassword",
        "Links":  "https://dbatools.io/Test-DbaLoginPassword",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eTest-DbaLoginPassword -SqlInstance Dev01\nTest all SQL logins that the password is null or same as username on SQL server instance Dev01\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eTest-DbaLoginPassword -SqlInstance Dev01 -Login sqladmin\nTest the \u0027sqladmin\u0027 SQL login that the password is null or same as username on SQL server instance Dev01\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eTest-DbaLoginPassword -SqlInstance Dev01 -Dictionary Test1,test2\nTest all SQL logins that the password is null, same as username or Test1,Test2 on SQL server instance Dev0\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaLogin -SqlInstance \"sql2017\",\"sql2016\" | Test-DbaLoginPassword\nTest all logins on sql2017 and sql2016\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003e$servers | Get-DbaLogin | Out-GridView -PassThru | Test-DbaLoginPassword\nTest selected logins on all servers in the $servers variable",
        "Syntax":  "Test-DbaLoginPassword [[-SqlInstance] \u003cDbaInstanceParameter[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-Login] \u003cString[]\u003e] [[-Dictionary] \u003cString[]\u003e] [[-InputObject] \u003cLogin[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Test-DbaManagementObject",
        "Description":  "The Test-DbaManagementObject returns True if the Version is on the computer, and False if it does not exist.",
        "Tags":  "SMO",
        "Params":  [
                       [
                           "ComputerName",
                           "The name of the target you would like to check",
                           "ServerInstance,SqlServer,SqlInstance",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "This command uses Windows credentials. This parameter allows you to connect remotely as a different user.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "VersionNumber",
                           "This is the specific version number you are looking for and the return will be True.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Test-DbaSqlManagementObject",
        "Author":  "Ben Miller (@DBAduck), http://dbaduck.com",
        "Synopsis":  "Tests to see if the SMO version specified exists on the computer.",
        "Name":  "Test-DbaManagementObject",
        "Links":  "https://dbatools.io/Test-DbaManagementObject",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eTest-DbaManagementObject -VersionNumber 13\nReturns True if the version exists, if it does not exist it will return False",
        "Syntax":  "Test-DbaManagementObject [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [-VersionNumber] \u003cInt32[]\u003e [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Test-DbaMaxDop",
        "Description":  "Inspired by Sakthivel Chidambaram\u0027s post about SQL Server MAXDOP Calculator (https://blogs.msdn.microsoft.com/sqlsakthi/p/maxdop-calculator-SqlInstance/),\nthis script displays a SQL Server\u0027s: max dop configured, and the calculated recommendation.\n\nFor SQL Server 2016 shows:\n- Instance max dop configured and the calculated recommendation\n- max dop configured per database (new feature)\n\nMore info:\nhttps://support.microsoft.com/en-us/kb/2806535\nhttps://blogs.msdn.microsoft.com/sqlsakthi/2012/05/23/wow-we-have-maxdop-calculator-for-sql-server-it-makes-my-job-easier/\n\nThese are just general recommendations for SQL Server and are a good starting point for setting the \"max degree of parallelism\" option.",
        "Tags":  [
                     "MaxDop",
                     "SpConfigure"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer,SqlServers",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Detailed",
                           "Output all properties, will be deprecated in 1.0.0 release.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Claudio Silva (@claudioessilva)",
        "Synopsis":  "Displays information relating to SQL Server Max Degree of Parallelism setting. Works on SQL Server 2005-2016.",
        "Name":  "Test-DbaMaxDop",
        "Links":  "https://dbatools.io/Test-DbaMaxDop",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eTest-DbaMaxDop -SqlInstance sql2008, sqlserver2012\nGet Max DOP setting for servers sql2008 and sqlserver2012 and also the recommended one.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eTest-DbaMaxDop -SqlInstance sql2014 | Select-Object *\nShows Max DOP setting for server sql2014 with the recommended value. Piping the output to Select-Object * will also show the \u0027NumaNodes\u0027 and \u0027NumberOfCores\u0027 of each instance\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eTest-DbaMaxDop -SqlInstance sqlserver2016 | Select-Object *\nGet Max DOP setting for servers sql2016 with the recommended value. Piping the output to Select-Object * will also show the \u0027NumaNodes\u0027 and \u0027NumberOfCores\u0027 of each instance. Because it is an 2016 \r\ninstance will be shown \u0027InstanceVersion\u0027, \u0027Database\u0027 and \u0027DatabaseMaxDop\u0027 columns.",
        "Syntax":  "Test-DbaMaxDop [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Detailed] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Test-DbaMaxMemory",
        "Description":  "Inspired by Jonathan Kehayias\u0027s post about SQL Server Max memory (http://bit.ly/sqlmemcalc), this script displays a SQL Server\u0027s: total memory, currently configured SQL max memory, and the calculated recommendation.\n\nJonathan notes that the formula used provides a *general recommendation* that doesn\u0027t account for everything that may be going on in your specific environment.",
        "Tags":  [
                     "MaxMemory",
                     "Memory"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Windows or Sql Login Credential with permission to log into the SQL instance",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Credential",
                           "Windows Credential with permission to log on to the server running the SQL instance",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Calculates the recommended value for SQL Server \u0027Max Server Memory\u0027 configuration setting. Works on SQL Server 2000-2014.",
        "Name":  "Test-DbaMaxMemory",
        "Links":  "https://dbatools.io/Test-DbaMaxMemory",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eTest-DbaMaxMemory -SqlInstance sqlcluster,sqlserver2012\nCalculate the \u0027Max Server Memory\u0027 for SQL Server instances sqlcluster and sqlserver2012\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eGet-DbaCmsRegServer -SqlInstance sqlcluster | Test-DbaMaxMemory\nCalculate the \u0027Max Server Memory\u0027 settings for all servers within the SQL Server Central Management Server \"sqlcluster\"\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaCmsRegServer -SqlInstance sqlcluster | Test-DbaMaxMemory | Where-Object { $_.MaxValue -gt $_.Total } | Set-DbaMaxMemory\nFind all servers in CMS that have Max SQL memory set to higher than the total memory of the server (think 2147483647) and set it to recommended value.",
        "Syntax":  "Test-DbaMaxMemory [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Credential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Test-DbaMigrationConstraint",
        "Description":  "When you want to migrate from a higher edition to a lower one there are some features that can\u0027t be used.\nThis function will validate if you have any of this features in use and will report to you.\nThe validation will be made ONLY on on SQL Server 2008 or higher using the \u0027sys.dm_db_persisted_sku_features\u0027 dmv.\n\nThis function only validate SQL Server 2008 versions or higher.\nThe editions supported by this function are:\n- Enterprise\n- Developer\n- Evaluation\n- Standard\n- Express\n\nTake into account the new features introduced on SQL Server 2016 SP1 for all versions. More information at https://blogs.msdn.microsoft.com/sqlreleaseservices/sql-server-2016-service-pack-1-sp1-released/\n\nThe -Database parameter is auto-populated for command-line completion.",
        "Tags":  "Migration",
        "Params":  [
                       [
                           "Source",
                           "Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SourceSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Destination",
                           "Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "DestinationSqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.",
                           "Databases",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeDatabase",
                           "The database(s) to exclude. Options for this list are auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Test-SqlMigrationConstraint",
        "Author":  "Claudio Silva (@ClaudioESSilva)",
        "Synopsis":  "Show if you can migrate the database(s) between the servers.",
        "Name":  "Test-DbaMigrationConstraint",
        "Links":  "https://dbatools.io/Test-DbaMigrationConstraint",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eTest-DbaMigrationConstraint -Source sqlserver2014a -Destination sqlcluster\nAll databases on sqlserver2014a will be verified for features in use that can\u0027t be supported on sqlcluster.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eTest-DbaMigrationConstraint -Source sqlserver2014a -Destination sqlcluster -SourceSqlCredential $cred\nAll databases will be verified for features in use that can\u0027t be supported on the destination server. SQL credentials are used to authenticate against sqlserver2014a and Windows Authentication is \r\nused for sqlcluster.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eTest-DbaMigrationConstraint -Source sqlserver2014a -Destination sqlcluster -Database db1\nOnly db1 database will be verified for features in use that can\u0027t be supported on the destination server.",
        "Syntax":  "Test-DbaMigrationConstraint [-Source] \u003cDbaInstanceParameter\u003e [[-SourceSqlCredential] \u003cPSCredential\u003e] [-Destination] \u003cDbaInstanceParameter\u003e [[-DestinationSqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject[]\u003e] [[-ExcludeDatabase] \u003cObject[]\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Test-DbaNetworkLatency",
        "Description":  "This function is intended to help measure SQL Server network latency by establishing a connection and executing a simple query. This is a better than a simple ping because it actually creates the connection to the SQL Server and measures the time required for only the entire routine, but the duration of the query as well how long it takes for the results to be returned.\n\nBy default, this command will execute \"SELECT TOP 100 * FROM INFORMATION_SCHEMA.TABLES\" three times. It will then output how long the entire connection and command took, as well as how long *only* the execution of the command took.\n\nThis allows you to see if the issue is with the connection or the SQL Server itself.",
        "Tags":  [
                     "Performance",
                     "Network"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The SQL Server you want to run the test on.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Query",
                           "Specifies the query to be executed. By default, \"SELECT TOP 100 * FROM INFORMATION_SCHEMA.TABLES\" will be executed on master. To execute in other databases, use fully qualified object names.",
                           "",
                           false,
                           "false",
                           "select top 100 * from INFORMATION_SCHEMA.TABLES"
                       ],
                       [
                           "Count",
                           "Specifies how many times the query should be executed. By default, the query is executed three times.",
                           "",
                           false,
                           "false",
                           "3"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Test-SqlNetworkLatency",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Tests how long a query takes to return from SQL Server",
        "Name":  "Test-DbaNetworkLatency",
        "Links":  "https://dbatools.io/Test-DbaNetworkLatency",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eTest-DbaNetworkLatency -SqlInstance sqlserver2014a, sqlcluster\nTests the round trip return of \"SELECT TOP 100 * FROM INFORMATION_SCHEMA.TABLES\" on sqlserver2014a and sqlcluster using Windows credentials.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eTest-DbaNetworkLatency -SqlInstance sqlserver2014a -SqlCredential $cred\nTests the execution results return of \"SELECT TOP 100 * FROM INFORMATION_SCHEMA.TABLES\" on sqlserver2014a using SQL credentials.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eTest-DbaNetworkLatency -SqlInstance sqlserver2014a, sqlcluster, sqlserver -Query \"select top 10 * from otherdb.dbo.table\" -Count 10\nTests the execution results return of \"select top 10 * from otherdb.dbo.table\" 10 times on sqlserver2014a, sqlcluster, and sqlserver using Windows credentials.",
        "Syntax":  "Test-DbaNetworkLatency [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Query] \u003cString\u003e] [[-Count] \u003cInt32\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Test-DbaOptimizeForAdHoc",
        "Description":  "When this option is set, plan cache size is further reduced for single-use ad hoc OLTP workload.\n\nMore info: https://msdn.microsoft.com/en-us/library/cc645587.aspx\nhttp://www.sqlservercentral.com/blogs/glennberry/2011/02/25/some-suggested-sql-server-2008-r2-instance-configuration-settings/\n\nThese are just general recommendations for SQL Server and are a good starting point for setting the \"optimize for ad-hoc workloads\" option.",
        "Tags":  [
                     "Configure",
                     "SPConfigure"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "A collection of one or more SQL Server instance names to query.",
                           "ServerInstance,SqlServer,SqlServers",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message. This avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because \r\nit basically disables advanced scripting. Using this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Brandon Abshire, netnerds.net",
        "Synopsis":  "Displays information relating to SQL Server Optimize for AdHoc Workloads setting.  Works on SQL Server 2008-2016.",
        "Name":  "Test-DbaOptimizeForAdHoc",
        "Links":  "https://dbatools.io/Test-DbaOptimizeForAdHoc",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eTest-DbaOptimizeForAdHoc -SqlInstance sql2008, sqlserver2012\nValidates whether Optimize for AdHoc Workloads setting is enabled for servers sql2008 and sqlserver2012.",
        "Syntax":  "Test-DbaOptimizeForAdHoc [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Test-DbaPath",
        "Description":  "Uses master.dbo.xp_fileexist to determine if a file or directory exists.",
        "Tags":  [
                     "Path",
                     "ServiceAccount"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The SQL Server you want to run the test on.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Path",
                           "The Path to test. This can be a file or directory",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Test-DbaSqlPath,Test-SqlPath",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Tests if file or directory exists from the perspective of the SQL Server service account.",
        "Name":  "Test-DbaPath",
        "Links":  "https://dbatools.io/Test-DbaPath",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eTest-DbaPath -SqlInstance sqlcluster -Path L:\\MSAS12.MSSQLSERVER\\OLAP\nTests whether the service account running the \"sqlcluster\" SQL Server instance can access L:\\MSAS12.MSSQLSERVER\\OLAP. Logs into sqlcluster using Windows credentials.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e$credential = Get-Credential\nPS C:\\\u003e Test-DbaPath -SqlInstance sqlcluster -SqlCredential $credential -Path L:\\MSAS12.MSSQLSERVER\\OLAP\nTests whether the service account running the \"sqlcluster\" SQL Server instance can access L:\\MSAS12.MSSQLSERVER\\OLAP. Logs into sqlcluster using SQL authentication.",
        "Syntax":  "Test-DbaPath [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-Path] \u003cObject\u003e [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Test-DbaPowerPlan",
        "Description":  "Checks the Power Plan settings on a computer against best practices recommendations. If one server is checked, only $true or $false is returned. If multiple servers are checked, each server\u0027s name and an isBestPractice field are returned.\n\nReferences:\nhttps://support.microsoft.com/en-us/kb/2207548\nhttp://www.sqlskills.com/blogs/glenn/windows-power-plan-effects-on-newer-intel-processors/",
        "Tags":  "PowerPlan",
        "Params":  [
                       [
                           "ComputerName",
                           "The server(s) to check Power Plan settings on.",
                           "ServerInstance,SqlServer,SqlInstance",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Specifies a PSCredential object to use in authenticating to the server(s), instead of the current user account.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "CustomPowerPlan",
                           "If your organization uses a custom power plan that\u0027s considered best practice, specify it here.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Enables piping from Get-DbaPowerPlan",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Detailed",
                           "Output all properties, will be deprecated in 1.0.0 release.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Checks the Power Plan settings for compliance with best practices, which recommend High Performance for SQL Server.",
        "Name":  "Test-DbaPowerPlan",
        "Links":  "https://dbatools.io/Test-DbaPowerPlan",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eTest-DbaPowerPlan -ComputerName sqlserver2014a\nChecks the Power Plan settings for sqlserver2014a and indicates whether or not it complies with best practices.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eTest-DbaPowerPlan -ComputerName sqlserver2014a -CustomPowerPlan \u0027Maximum Performance\u0027\nChecks the Power Plan settings for sqlserver2014a and indicates whether or not it is set to the custom plan \"Maximum Performance\".",
        "Syntax":  "Test-DbaPowerPlan [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [[-Credential] \u003cPSCredential\u003e] [[-CustomPowerPlan] \u003cString\u003e] [[-InputObject] \u003cPSObject\u003e] [-Detailed] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Test-DbaRepLatency",
        "Description":  "Creates tracer tokens to determine latency between the publisher/distributor and the distributor/subscriber\nfor all transactional publications for a server, database, or publication.",
        "Tags":  "Replication",
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Database",
                           "The database(s) to process. If unspecified, all databases will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "PublicationName",
                           "The publication(s) to process. If unspecified, all publications will be processed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "TimeToLive",
                           "How long, in seconds, to wait for a tracer token to complete its journey from the publisher to the subscriber.\r\nIf unspecified, all tracer tokens will take as long as they need to process results.",
                           "",
                           false,
                           "false",
                           "0"
                       ],
                       [
                           "RetainToken",
                           "Retains the tracer tokens created for each publication. If unspecified, all tracer tokens created will be discarded.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "DisplayTokenHistory",
                           "Displays all tracer tokens in each publication. If unspecified, the current tracer token created will be only token displayed.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Colin Douglas",
        "Synopsis":  "Displays replication latency for all transactional publications for a server or database.",
        "Name":  "Test-DbaRepLatency",
        "Links":  "https://dbatools.io/Test-DbaRepLatency",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eTest-DbaRepLatency -SqlInstance sql2008, sqlserver2012\nReturn replication latency for all transactional publications for servers sql2008 and sqlserver2012.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eTest-DbaRepLatency -SqlInstance sql2008 -Database TestDB\nReturn replication latency for all transactional publications on server sql2008 for only the TestDB database\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eTest-DbaRepLatency -SqlInstance sql2008 -Database TestDB -PublicationName TestDB_Pub\nReturn replication latency for the TestDB_Pub publication for the TestDB database located on the server sql2008.",
        "Syntax":  "Test-DbaRepLatency [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-Database] \u003cObject[]\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-PublicationName] \u003cObject[]\u003e] [[-TimeToLive] \u003cInt32\u003e] [-RetainToken] [-DisplayTokenHistory] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Test-DbaServerName",
        "Description":  "When a SQL Server\u0027s host OS is renamed, the SQL Server should be as well. This helps with Availability Groups and Kerberos.\n\nThis command helps determine if your OS and SQL Server names match, and whether a rename is required.\n\nIt then checks conditions that would prevent a rename, such as database mirroring and replication.\n\nhttps://www.mssqltips.com/sqlservertip/2525/steps-to-change-the-server-name-for-a-sql-server-machine/",
        "Tags":  [
                     "SPN",
                     "ServerName"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Detailed",
                           "Output all properties, will be deprecated in 1.0.0 release.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "ExcludeSsrs",
                           "If this switch is enabled, checking for SQL Server Reporting Services will be skipped.",
                           "NoWarning",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Tests to see if it\u0027s possible to easily rename the server at the SQL Server instance level, or if it even needs to be changed.",
        "Name":  "Test-DbaServerName",
        "Links":  "https://dbatools.io/Test-DbaServerName",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eTest-DbaServerName -SqlInstance sqlserver2014a\nReturns ServerInstanceName, SqlServerName, IsEqual and RenameRequired for sqlserver2014a.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eTest-DbaServerName -SqlInstance sqlserver2014a, sql2016\nReturns ServerInstanceName, SqlServerName, IsEqual and RenameRequired for sqlserver2014a and sql2016.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eTest-DbaServerName -SqlInstance sqlserver2014a, sql2016 -ExcludeSsrs\nReturns ServerInstanceName, SqlServerName, IsEqual and RenameRequired for sqlserver2014a and sql2016, but skips validating if SSRS is installed on both instances.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eTest-DbaServerName -SqlInstance sqlserver2014a, sql2016 | Select-Object *\nReturns ServerInstanceName, SqlServerName, IsEqual and RenameRequired for sqlserver2014a and sql2016.\r\nIf a Rename is required, it will also show Updatable, and Reasons if the server name is not updatable.",
        "Syntax":  "Test-DbaServerName [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-Detailed] [-ExcludeSsrs] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Test-DbaSpn",
        "Description":  "This function is designed to take in a server name(s) and attempt to determine required SPNs. It was initially written to mimic the (previously) broken functionality of the Microsoft Kerberos Configuration manager and SQL Server 2016.\n\n- For any instances with TCP/IP enabled, the script will determine which port(s) the instances are listening on and generate the required SPNs.\n- For named instances NOT using dynamic ports, the script will generate a port-based SPN for those instances as well.\n- At a minimum, the script will test a base, port-less SPN for each instance discovered.\n\nOnce the required SPNs are generated, the script will connect to Active Directory and search for any of the SPNs (if any) that are already set. The function will return a custom object(s) that contains the server name checked, the instance name discovered, the account the service is running under, and what the \"required\" SPN should be. It will also return a boolean property indicating if the SPN is set in Active Directory or not.",
        "Tags":  "SPN",
        "Params":  [
                       [
                           "ComputerName",
                           "The computer you want to discover any SQL Server instances on. This parameter is required.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Credential",
                           "The credential you want to use to connect to the remote server and active directory.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "",
        "Author":  "Drew Furgiuele (@pittfurg), http://www.port1433.com | niphlod",
        "Synopsis":  "Test-DbaSpn will determine what SPNs *should* be set for a given server (and any instances of SQL running on it) and return\nwhether the SPNs are set or not.",
        "Name":  "Test-DbaSpn",
        "Links":  "https://dbatools.io/Test-DbaSpn",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eTest-DbaSpn -ComputerName SQLSERVERA -Credential ad\\sqldba\nConnects to a computer (SQLSERVERA) and queries WMI for all SQL instances and return \"required\" SPNs. It will then take each SPN it generates\r\nand query Active Directory to make sure the SPNs are set.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eTest-DbaSpn -ComputerName SQLSERVERA,SQLSERVERB -Credential ad\\sqldba\nConnects to multiple computers (SQLSERVERA, SQLSERVERB) and queries WMI for all SQL instances and return \"required\" SPNs.\r\nIt will then take each SPN it generates and query Active Directory to make sure the SPNs are set.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eTest-DbaSpn -ComputerName SQLSERVERC -Credential ad\\sqldba\nConnects to a computer (SQLSERVERC) on a specified and queries WMI for all SQL instances and return \"required\" SPNs.\r\nIt will then take each SPN it generates and query Active Directory to make sure the SPNs are set. Note that the credential you pass must have be a valid login with appropriate rights on the domain",
        "Syntax":  "Test-DbaSpn [-ComputerName] \u003cDbaInstanceParameter[]\u003e [[-Credential] \u003cPSCredential\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Test-DbaTempdbConfig",
        "Description":  "Evaluates tempdb against a set of rules to match best practices. The rules are:\n\n* TF 1118 enabled - Is Trace Flag 1118 enabled (See KB328551).\n* File Count - Does the count of data files in tempdb match the number of logical cores, up to 8?\n* File Growth - Are any files set to have percentage growth? Best practice is all files have an explicit growth value.\n* File Location - Is tempdb located on the C:\\? Best practice says to locate it elsewhere.\n* File MaxSize Set (optional) - Do any files have a max size value? Max size could cause tempdb problems if it isn\u0027t allowed to grow.\n* Data File Size Equal - Are the sizes of all the tempdb data files the same?\n\nOther rules can be added at a future date.",
        "Tags":  [
                     "tempdb",
                     "configuration"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. SQL Server 2005 and higher are supported.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Detailed",
                           "Output all properties, will be depreciated in 1.0.0 release.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Test-DbaTempDbConfiguration,Test-SqlTempDbConfiguration",
        "Author":  "Michael Fal (@Mike_Fal), http://mikefal.net",
        "Synopsis":  "Evaluates tempdb against several rules to match best practices.",
        "Name":  "Test-DbaTempdbConfig",
        "Links":  "https://dbatools.io/Test-DbaTempdbConfig",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eTest-DbaTempdbConfig -SqlInstance localhost\nChecks tempdb on the localhost machine.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eTest-DbaTempdbConfig -SqlInstance localhost | Select-Object *\nChecks tempdb on the localhost machine. All rest results are shown.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaCmsRegServer -SqlInstance sqlserver2014a | Test-DbaTempdbConfig | Select-Object * | Out-GridView\nChecks tempdb configuration for a group of servers from SQL Server Central Management Server (CMS). Output includes all columns. Send output to GridView.",
        "Syntax":  "Test-DbaTempdbConfig [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [-Detailed] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Test-DbaWindowsLogin",
        "Description":  "The purpose of this function is to find SQL Server logins that are used by active directory users that are either disabled or removed from the domain. It allows you to keep your logins accurate and up to date by removing accounts that are no longer needed.",
        "Tags":  [
                     "Login",
                     "Security"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The SQL Server instance you\u0027re checking logins on. You must have sysadmin access and server version must be SQL Server version 2000 or higher.",
                           "ServerInstance,SqlServer,SqlServers",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Login",
                           "Specifies a list of logins to include in the results. Options for this list are auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ExcludeLogin",
                           "Specifies a list of logins to exclude from the results. Options for this list are auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "FilterBy",
                           "Specifies the object types to return. By default, both Logins and Groups are returned. Valid options for this parameter are \u0027GroupsOnly\u0027 and \u0027LoginsOnly\u0027.",
                           "",
                           false,
                           "false",
                           "None"
                       ],
                       [
                           "IgnoreDomains",
                           "Specifies a list of Active Directory domains to ignore. By default, all domains in the forest as well as all trusted domains are traversed.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Detailed",
                           "Output all properties, will be depreciated in 1.0.0 release.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Test-DbaValidLogin",
        "Author":  "Stephen Bennett, https://sqlnotesfromtheunderground.wordpress.com/ | Chrissy LeMaire (@cl)",
        "Synopsis":  "Test-DbaWindowsLogin finds any logins on SQL instance that are AD logins with either disabled AD user accounts or ones that no longer exist",
        "Name":  "Test-DbaWindowsLogin",
        "Links":  "https://dbatools.io/Test-DbaWindowsLogin",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eTest-DbaWindowsLogin -SqlInstance Dev01\nTests all logins in the current Active Directory domain that are either disabled or do not exist on the SQL Server instance Dev01\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eTest-DbaWindowsLogin -SqlInstance Dev01 -FilterBy GroupsOnly | Select-Object -Property *\nTests all Active Directory groups that have logins on Dev01, and shows all information for those logins\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eTest-DbaWindowsLogin -SqlInstance Dev01 -IgnoreDomains testdomain\nTests all Domain logins excluding any that are from the testdomain",
        "Syntax":  "Test-DbaWindowsLogin [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [-SqlCredential \u003cPSCredential\u003e] [-Login \u003cObject[]\u003e] [-ExcludeLogin \u003cObject[]\u003e] [-FilterBy \u003cString\u003e] [-IgnoreDomains \u003cString[]\u003e] [-Detailed] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Uninstall-DbaSqlWatch",
        "Description":  "Deletes all user objects, agent jobs, and historical data associated with SqlWatch.",
        "Tags":  "SqlWatch",
        "Params":  [
                       [
                           "SqlInstance",
                           "SQL Server name or SMO object representing the SQL Server to connect to.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "Specifies the database to install SqlWatch into. Defaults to master.",
                           "",
                           false,
                           "false",
                           "master"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts to confirm actions",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Ken K (github.com/koglerk)",
        "Synopsis":  "Uninstalls SqlWatch.",
        "Name":  "Uninstall-DbaSqlWatch",
        "Links":  "https://dbatools.io/Uninstall-DbaSqlWatch",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eUninstall-DbaSqlWatch -SqlInstance server1\nDeletes all user objects, agent jobs, and historical data associated with SqlWatch from the master database.",
        "Syntax":  "Uninstall-DbaSqlWatch [-SqlInstance] \u003cDbaInstanceParameter[]\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cString\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Uninstall-DbaWatchUpdate",
        "Description":  "Removes the scheduled task created for Watch-DbaUpdate by Install-DbaWatchUpdate so that notifications no longer pop up.",
        "Tags":  [
                     "JustForFun",
                     "Module"
                 ],
        "Params":  [

                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Removes the scheduled task created for Watch-DbaUpdate by Install-DbaWatchUpdate so that notifications no longer pop up.",
        "Name":  "Uninstall-DbaWatchUpdate",
        "Links":  "https://dbatools.io/Uninstall-DbaWatchUpdate",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eUninstall-DbaWatchUpdate\nRemoves the scheduled task created by Install-DbaWatchUpdate.",
        "Syntax":  "Uninstall-DbaWatchUpdate [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Unregister-DbatoolsConfig",
        "Description":  "Removes registered configuration settings.\nThis function can be used to remove settings that have been persisted for either user or computer.\n\nNote: This command has no effect on configuration setings currently in memory.",
        "Params":  [
                       [
                           "ConfigurationItem",
                           "A configuration object as returned by Get-DbatoolsConfig.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "FullName",
                           "The full name of the configuration setting to purge.",
                           "",
                           false,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Module",
                           "The module, amongst which settings should be unregistered.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "Name",
                           "The name of the setting to unregister.\r\nFor use together with the module parameter, to limit the amount of settings that are unregistered.",
                           "",
                           false,
                           "false",
                           "*"
                       ],
                       [
                           "Scope",
                           "Settings can be set to either default or enforced, for user or the entire computer.\r\nBy default, only DefaultSettings for the user are unregistered.\r\nUse this parameter to choose the actual scope for the command to process.",
                           "",
                           false,
                           "false",
                           "UserDefault"
                       ]
                   ],
        "Alias":  "",
        "Synopsis":  "Removes registered configuration settings.",
        "Name":  "Unregister-DbatoolsConfig",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eGet-DbatoolsConfig | Unregister-DbatoolsConfig\nCompletely removes all registered configurations currently loaded in memory.\r\nIn most cases, this will mean removing all registered configurations.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eUnregister-DbatoolsConfig -Scope SystemDefault -FullName \u0027MyModule.Path.DefaultExport\u0027\nUnregisters the setting \u0027MyModule.Path.DefaultExport\u0027 from the list of computer-wide defaults.\r\nNote: Changing system wide settings requires running the console with elevation.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eUnregister-DbatoolsConfig -Module MyModule\nUnregisters all configuration settings for the module MyModule.",
        "Syntax":  "Unregister-DbatoolsConfig [-ConfigurationItem \u003cConfig[]\u003e] [-FullName \u003cString[]\u003e] [-Scope {UserDefault | UserMandatory | SystemDefault | SystemMandatory | FileUserLocal | FileUserShared | FileSystem}] [\u003cCommonParameters\u003e]\nUnregister-DbatoolsConfig -Module \u003cString\u003e [-Name \u003cString\u003e] [-Scope {UserDefault | UserMandatory | SystemDefault | SystemMandatory | FileUserLocal | FileUserShared | FileSystem}] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Update-DbaInstance",
        "Description":  "Starts and automated process of updating SQL Server installation to a specific version defined in the parameters.\nThe command will:\n\n* Search for SQL Server installations in a remote registry\n* Check if current settings are applicable to the current SQL Server versions\n* Search for a KB executable in a folder specified in -Path\n* Establish a PSRemote connection to the target machine if necessary\n* Extract KB to a temporary folder in a current user\u0027s profile\n* Run the installation from the temporary folder updating all instances on the computer at once\n* Remove temporary files\n* Restart the computer (if -Restart is specified)\n* Repeat for each consequent KB and computer\n\nThe impact of this function is set to High, if you don\u0027t want to receive interactive prompts, set -Confirm to $false.\nCredentials are a required parameter for remote machines. Without specifying -Credential, the installation will fail due to lack of permissions.\n\nCredSSP is a recommended transport for running the updates remotely. Update-DbaInstance will attempt to reconfigure\nlocal and remote hosts to support CredSSP, which is why it is desirable to run this command in an elevated console at all times.\nCVE-2018-0886 security update is required for both local and remote hosts. If CredSSP connections are failing, make sure to\napply recent security updates prior to doing anything else.\n\nAlways backup databases and configurations prior to upgrade.",
        "Tags":  [
                     "Install",
                     "Patching",
                     "SP",
                     "CU",
                     "Instance"
                 ],
        "Params":  [
                       [
                           "ComputerName",
                           "Target computer with SQL instance or instsances.",
                           "cn,host,Server",
                           false,
                           "true (ByValue)",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Windows Credential with permission to log on to the remote server. Must be specified for any remote connection.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Version",
                           "A target version of the installation you want to reach. If not specified, a latest available version would be used by default.\r\nCan be defined using the following general pattern: \u003cMajorVersion\u003e\u003cSPX\u003e\u003cCUX\u003e.\r\nAny part of the pattern can be ommitted if needed:\r\n2008R2SP1 - will update SQL 2008R2 to SP1\r\n2016CU3 - will update SQL 2016 to CU3 of current Service Pack installed\r\nSP0CU3 - will update all existing SQL Server versions to RTM CU3 without installing any service packs\r\nSP1CU7 - will update all existing SQL Server versions to SP1 and then (after restart if -Restart is specified) to SP1CU7\r\nCU7 - will update all existing SQL Server versions to CU7 of current Service Pack installed",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Type",
                           "Type of the update: All | ServicePack | CumulativeUpdate.\r\nDefault: All\r\nUse -Version to limit upgrade to a certain Major version of SQL Server.",
                           "",
                           false,
                           "false",
                           "@(\u0027All\u0027)"
                       ],
                       [
                           "KB",
                           "Install a specific update or list of updates. Can be a number of a string KBXXXXXXX.",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "InstanceName",
                           "Only updates a specific instance(s).",
                           "Instance",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Path",
                           "Path to the folder(s) with SQL Server patches downloaded. It will be scanned recursively for available patches.\r\nPath should be available from both server with SQL Server installation and client that runs the command.\r\nAll file names should match the pattern used by Microsoft: SQLServer####*-KB###-*x##*.exe\r\nIf a file is missing in the repository, the installation will fail.\r\nConsider setting the following configuration if you want to omit this parameter: `Set-DbatoolsConfig -Name Path.SQLServerUpdates -Value \u0027\\\\path\\to\\updates\u0027`",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Restart",
                           "Restart computer automatically after a successful installation of a patch and wait until it comes back online.\r\nUsing this parameter is the only way to chain-install more than 1 patch on a computer, since every single patch will require a restart of said computer.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Continue",
                           "Continues a failed installation attempt when specified. Will abort a previously failed installation otherwise.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Throttle",
                           "Maximum number of computers updated in parallel. Once reached, the update operations will queue up.\r\nDefault: 50",
                           "",
                           false,
                           "false",
                           "50"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Kirill Kravtsov (@nvarscar) https://nvarscar.wordpress.com/",
        "Synopsis":  "Invokes installation of SQL Server Service Packs and Cumulative Updates on local and remote servers.",
        "Name":  "Update-DbaInstance",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eUpdate-DbaInstance -ComputerName SQL1 -Version SP3 -Path \\\\network\\share\nUpdates all applicable SQL Server installations on SQL1 to SP3.\r\nBinary files for the update will be searched among all files and folders recursively in \\\\network\\share.\r\nPrompts for confirmation before the update.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eUpdate-DbaInstance -ComputerName SQL1, SQL2 -Restart -Path \\\\network\\share -Confirm:$false\nUpdates all applicable SQL Server installations on SQL1 and SQL2 with the most recent patch.\r\nIt will install latest ServicePack, restart the computers, install latest Cumulative Update, and finally restart the computer once again.\r\nBinary files for the update will be searched among all files and folders recursively in \\\\network\\share.\r\nDoes not prompt for confirmation.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eUpdate-DbaInstance -ComputerName SQL1 -Version 2012 -Type ServicePack -Path \\\\network\\share\nUpdates SQL Server 2012 on SQL1 with the most recent ServicePack found in your patch repository.\r\nBinary files for the update will be searched among all files and folders recursively in \\\\network\\share.\r\nPrompts for confirmation before the update.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eUpdate-DbaInstance -ComputerName SQL1 -KB 123456 -Restart -Path \\\\network\\share -Confirm:$false\nInstalls KB 123456 on SQL1 and restarts the computer.\r\nBinary files for the update will be searched among all files and folders recursively in \\\\network\\share.\r\nDoes not prompt for confirmation.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003eUpdate-DbaInstance -ComputerName Server1 -Version SQL2012SP3, SQL2016SP2CU3 -Path \\\\network\\share -Restart -Confirm:$false\nUpdates SQL 2012 to SP3 and SQL 2016 to SP2CU3 on Server1. Each update will be followed by a restart.\r\nBinary files for the update will be searched among all files and folders recursively in \\\\network\\share.\r\nDoes not prompt for confirmation.",
        "Syntax":  "Update-DbaInstance [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [-Credential \u003cPSCredential\u003e] [-Version \u003cString[]\u003e] [-Type \u003cString[]\u003e] [-InstanceName \u003cString\u003e] [-Path \u003cString[]\u003e] [-Restart] [-Continue] [-Throttle \u003cInt32\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nUpdate-DbaInstance [[-ComputerName] \u003cDbaInstanceParameter[]\u003e] [-Credential \u003cPSCredential\u003e] -KB \u003cString[]\u003e [-InstanceName \u003cString\u003e] [-Path \u003cString[]\u003e] [-Restart] [-Continue] [-Throttle \u003cInt32\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Update-DbaServiceAccount",
        "Description":  "Reconfigure the service account or update the password of the specified SQL Server service. The service will be restarted in the event of changing the account.",
        "Tags":  [
                     "Service",
                     "SqlServer",
                     "Instance",
                     "Connect"
                 ],
        "Params":  [
                       [
                           "ComputerName",
                           "The target SQL Server instance or instances.",
                           "cn,host,Server",
                           false,
                           "false",
                           "$env:COMPUTERNAME"
                       ],
                       [
                           "Credential",
                           "Windows Credential with permission to log on to the server running the SQL instance",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "A collection of services. Basically, any object that has ComputerName and ServiceName properties. Can be piped from Get-DbaService.",
                           "ServiceCollection",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "ServiceName",
                           "A name of the service on which the action is performed. E.g. MSSQLSERVER or SqlAgent$INSTANCENAME",
                           "Name,Service",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "Username",
                           "Username of the service account. Cannot be used with -ServiceCredential. For local service accounts use one of the following usernames omitting the -SecurePassword parameter:\r\nLOCALSERVICE\r\nNETWORKSERVICE\r\nLOCALSYSTEM",
                           "User",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ServiceCredential",
                           "Windows Credential object under which the service will be setup to run. Cannot be used with -Username. For local service accounts use one of the following usernames with empty password:\r\nLOCALSERVICE\r\nNETWORKSERVICE\r\nLOCALSYSTEM",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "PreviousPassword",
                           "An old password of the service account. Optional when run under local admin privileges.",
                           "",
                           false,
                           "false",
                           "(New-Object System.Security.SecureString)"
                       ],
                       [
                           "SecurePassword",
                           "New password of the service account. The function will ask for a password if not specified. MSAs and local system accounts will ignore the password.",
                           "Password,NewPassword",
                           false,
                           "false",
                           "(New-Object System.Security.SecureString)"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "Shows what would happen if the command were to run. No actions are actually performed.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "Prompts you for confirmation before executing any changing operations within the command.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "Update-DbaSqlServiceAccount",
        "Author":  "Kirill Kravtsov (@nvarscar)",
        "Synopsis":  "Changes service account (or just its password) of the SQL Server service.",
        "Name":  "Update-DbaServiceAccount",
        "Links":  null,
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003e$SecurePassword = ConvertTo-SecureString \u0027Qwerty1234\u0027 -AsPlainText -Force\nUpdate-DbaServiceAccount -ComputerName sql1 -ServiceName \u0027MSSQL$MYINSTANCE\u0027 -SecurePassword $SecurePassword\nChanges the current service account\u0027s password of the service MSSQL$MYINSTANCE to \u0027Qwerty1234\u0027\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e$cred = Get-Credential\nPS C:\\\u003e Get-DbaService sql1 -Type Engine,Agent -Instance MYINSTANCE | Update-DbaServiceAccount -ServiceCredential $cred\nRequests credentials from the user and configures them as a service account for the SQL Server engine and agent services of the instance sql1\\MYINSTANCE\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eUpdate-DbaServiceAccount -ComputerName sql1,sql2 -ServiceName \u0027MSSQLSERVER\u0027,\u0027SQLSERVERAGENT\u0027 -Username NETWORKSERVICE\nConfigures SQL Server engine and agent services on the machines sql1 and sql2 to run under Network Service system user.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003eGet-DbaService sql1 -Type Engine -Instance MSSQLSERVER | Update-DbaServiceAccount -Username \u0027MyDomain\\sqluser1\u0027\nConfigures SQL Server engine service on the machine sql1 to run under MyDomain\\sqluser1. Will request user to input the account password.",
        "Syntax":  "Update-DbaServiceAccount [-ComputerName \u003cDbaInstanceParameter[]\u003e] [-Credential \u003cPSCredential\u003e] [-ServiceName] \u003cString[]\u003e [-Username \u003cString\u003e] [-ServiceCredential \u003cPSCredential\u003e] [-PreviousPassword \u003cSecureString\u003e] [-SecurePassword \u003cSecureString\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]\nUpdate-DbaServiceAccount [-Credential \u003cPSCredential\u003e] -InputObject \u003cObject[]\u003e [-Username \u003cString\u003e] [-ServiceCredential \u003cPSCredential\u003e] [-PreviousPassword \u003cSecureString\u003e] [-SecurePassword \u003cSecureString\u003e] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Update-Dbatools",
        "Description":  "Exported function. Updates dbatools. Deletes current copy and replaces it with freshest copy.",
        "Tags":  "Module",
        "Params":  [
                       [
                           "Development",
                           "If this switch is enabled, the current development branch will be installed. By default, the latest official release is installed.",
                           "dev,devbranch",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Exported function. Updates dbatools. Deletes current copy and replaces it with freshest copy.",
        "Name":  "Update-Dbatools",
        "Links":  "https://dbatools.io/Update-DbaTools",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eUpdate-Dbatools\nUpdates dbatools. Deletes current copy and replaces it with freshest copy.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eUpdate-Dbatools -dev\nUpdates dbatools to the current development branch. Deletes current copy and replaces it with latest from github.",
        "Syntax":  "Update-Dbatools [-Development] [-EnableException] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Watch-DbaDbLogin",
        "Description":  "Watch-DbaDbLogin uses SQL Server DMV\u0027s to track logins into a SQL Server table. This is helpful when you need to migrate a SQL Server and update connection strings, but have inadequate documentation on which servers/applications are logging into your SQL instance.\n\nRunning this script every 5 minutes for a week should give you a sufficient idea about database and login usage.",
        "Tags":  "Login",
        "Params":  [
                       [
                           "SqlInstance",
                           "The SQL Server that stores the Watch database.",
                           "ServerInstance,SqlServer",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The name of the Watch database.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Table",
                           "The name of the Watch table. By default, this is DbaTools-WatchDbLogins.",
                           "",
                           false,
                           "false",
                           "DbaTools-WatchDbLogins"
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "SqlCms",
                           "Specifies a Central Management Server to query for a list of servers to watch.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "ServersFromFile",
                           "Specifies a file containing a list of servers to watch. This file must contain one server name per line.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Watch-SqlDbLogin",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Tracks SQL Server logins: which host they came from, what database they\u0027re using, and what program is being used to log in.",
        "Name":  "Watch-DbaDbLogin",
        "Links":  "https://dbatools.io/Watch-DbaDbLogin",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eWatch-DbaDbLogin -SqlInstance sqlserver -SqlCms SqlCms1\nA list of all database instances within the Central Management Server SqlCms1 is generated. Using this list, the script enumerates all the processes and gathers login information and saves it to the \r\ntable Dblogins in the DatabaseLogins database on SQL Server sqlserver.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eWatch-DbaDbLogin -SqlInstance sqlcluster -Database CentralAudit -ServersFromFile .\\sqlservers.txt\nA list of servers is gathered from the file sqlservers.txt in the current directory. Using this list, the script enumerates all the processes and gathers login information and saves it to the table \r\nDblogins in the CentralAudit database on SQL Server sqlcluster.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eWatch-DbaDbLogin -SqlInstance sqlserver -SqlCms SqlCms1 -SqlCredential $cred\nA list of servers is generated using database instance names within the SQL2014Clusters group on the Central Management Server SqlCms1. Using this list, the script enumerates all the processes and \r\ngathers login information and saves it to the table Dblogins in the DatabaseLogins database on sqlserver.",
        "Syntax":  "Watch-DbaDbLogin [-SqlInstance] \u003cDbaInstanceParameter\u003e [[-Database] \u003cObject\u003e] [[-Table] \u003cString\u003e] [[-SqlCredential] \u003cPSCredential\u003e] [[-SqlCms] \u003cString\u003e] [[-ServersFromFile] \u003cString\u003e] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Watch-DbaUpdate",
        "Description":  "Just for fun - checks the PowerShell Gallery every 1 hour for updates to dbatools. Notifies once max per release.\n\nAnyone know how to make it clickable so that it opens an URL?",
        "Tags":  [
                     "JustForFun",
                     "Module"
                 ],
        "Params":  [

                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Just for fun - checks the PowerShell Gallery every 1 hour for updates to dbatools. Notifies once per release.",
        "Name":  "Watch-DbaUpdate",
        "Links":  "https://dbatools.io/Watch-DbaUpdate",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eWatch-DbaUpdate\nWatches the gallery for updates to dbatools.",
        "Syntax":  "Watch-DbaUpdate [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Watch-DbaXESession",
        "Description":  "Watch live XEvent Data as it happens. This command runs until you stop the session, kill the PowerShell session, or Ctrl-C.\n\nThanks to Dave Mason (@BeginTry) for some straightforward code samples https://itsalljustelectrons.blogspot.be/2017/01/SQL-Server-Extended-Event-Handling-Via-Powershell.html",
        "Tags":  [
                     "ExtendedEvent",
                     "XE",
                     "XEvent"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2008 or higher.",
                           "ServerInstance,SqlServer",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Session",
                           "Only return a specific session. Options for this parameter are auto-populated from the server.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "Accepts an XESession object returned by Get-DbaXESession.",
                           "",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Raw",
                           "If this switch is enabled, the Microsoft.SqlServer.XEvent.Linq.QueryableXEventData enumeration object is returned.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ]
                   ],
        "Alias":  "Watch-DbaXEventSession",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Watch live XEvent Data as it happens",
        "Name":  "Watch-DbaXESession",
        "Links":  "https://dbatools.io/Watch-DbaXESession",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003eWatch-DbaXESession -SqlInstance sql2017 -Session system_health\nShows events for the system_health session as it happens.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003eWatch-DbaXESession -SqlInstance sql2017 -Session system_health | Export-Csv -NoTypeInformation -Path C:\\temp\\system_health.csv\nExports live events to CSV. Ctrl-C may not not cancel out of it - fastest way is to stop the session.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003eGet-DbaXESession -SqlInstance sql2017 -Session system_health | Start-DbaXESession | Watch-DbaXESession | Export-Csv -NoTypeInformation -Path C:\\temp\\system_health.csv\nExports live events to CSV. Ctrl-C may not not cancel out of this. The fastest way to do so is to stop the session.",
        "Syntax":  "Watch-DbaXESession [-SqlCredential \u003cPSCredential\u003e] [-Session \u003cString\u003e] [-Raw] [-EnableException] [\u003cCommonParameters\u003e]\nWatch-DbaXESession -SqlInstance \u003cDbaInstanceParameter\u003e [-SqlCredential \u003cPSCredential\u003e] [-Session \u003cString\u003e] [-Raw] [-EnableException] [\u003cCommonParameters\u003e]\nWatch-DbaXESession [-SqlCredential \u003cPSCredential\u003e] [-Session \u003cString\u003e] -InputObject \u003cSession\u003e [-Raw] [-EnableException] [\u003cCommonParameters\u003e]"
    },
    {
        "CommandName":  "Write-DbaDataTable",
        "Description":  "Writes a .NET DataTable to a SQL Server table using SQL Bulk Copy.",
        "Tags":  [
                     "DataTable",
                     "Insert"
                 ],
        "Params":  [
                       [
                           "SqlInstance",
                           "The target SQL Server instance or instances.",
                           "ServerInstance,SqlServer",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "SqlCredential",
                           "Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)",
                           "Credential",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Database",
                           "The database to import the table into.",
                           "",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "InputObject",
                           "This is the DataTable (or data row) to import to SQL Server.",
                           "DataTable",
                           true,
                           "true (ByValue)",
                           ""
                       ],
                       [
                           "Table",
                           "The table name to import data into. You can specify a one, two, or three part table name. If you specify a one or two part name, you must also use -Database.\nIf the table does not exist, you can use -AutoCreateTable to automatically create the table with inefficient data types.\nIf the object has special characters please wrap them in square brackets [ ].\r\nUsing dbo.First.Table will try to import to a table named \u0027Table\u0027 on schema \u0027First\u0027 and database \u0027dbo\u0027.\r\nThe correct way to import to a table named \u0027First.Table\u0027 on schema \u0027dbo\u0027 is by passing dbo.[First.Table]\r\nAny actual usage of the ] must be escaped by duplicating the ] character.\r\nThe correct way to import to a table Name] in schema Schema.Name is by passing [Schema.Name].[Name]]]",
                           "",
                           true,
                           "false",
                           ""
                       ],
                       [
                           "Schema",
                           "Defaults to dbo if no schema is specified.",
                           "",
                           false,
                           "false",
                           "dbo"
                       ],
                       [
                           "BatchSize",
                           "The BatchSize for the import defaults to 5000.",
                           "",
                           false,
                           "false",
                           "50000"
                       ],
                       [
                           "NotifyAfter",
                           "Sets the option to show the notification after so many rows of import",
                           "",
                           false,
                           "false",
                           "5000"
                       ],
                       [
                           "AutoCreateTable",
                           "If this switch is enabled, the table will be created if it does not already exist. The table will be created with sub-optimal data types such as nvarchar(max)",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "NoTableLock",
                           "If this switch is enabled, a table lock (TABLOCK) will not be placed on the destination table. By default, this operation will lock the destination table while running.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "CheckConstraints",
                           "If this switch is enabled, the SqlBulkCopy option to process check constraints will be enabled.\nPer Microsoft \"Check constraints while data is being inserted. By default, constraints are not checked.\"",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "FireTriggers",
                           "If this switch is enabled, the SqlBulkCopy option to fire insert triggers will be enabled.\nPer Microsoft \"When specified, cause the server to fire the insert triggers for the rows being inserted into the Database.\"",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "KeepIdentity",
                           "If this switch is enabled, the SqlBulkCopy option to preserve source identity values will be enabled.\nPer Microsoft \"Preserve source identity values. When not specified, identity values are assigned by the destination.\"",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "KeepNulls",
                           "If this switch is enabled, the SqlBulkCopy option to preserve NULL values will be enabled.\nPer Microsoft \"Preserve null values in the destination table regardless of the settings for default values. When not specified, null values are replaced by default values where applicable.\"",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "Truncate",
                           "If this switch is enabled, the destination table will be truncated after prompting for confirmation.",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "bulkCopyTimeOut",
                           "Value in seconds for the BulkCopy operations timeout. The default is 30 seconds.",
                           "",
                           false,
                           "false",
                           "5000"
                       ],
                       [
                           "RegularUser",
                           "Deprecated - now all connections are regular user (don\u0027t require admin)",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "EnableException",
                           "By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.\r\nThis avoids overwhelming you with \"sea of red\" exceptions, but is inconvenient because it basically disables advanced scripting.\r\nUsing this switch turns this \"nice by default\" feature off and enables you to catch exceptions with your own try/catch.",
                           "Silent",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "UseDynamicStringLength",
                           "By default, all string columns will be NVARCHAR(MAX).\r\nIf this switch is enabled, all columns will get the length specified by the column\u0027s MaxLength property (if specified)",
                           "",
                           false,
                           "false",
                           "False"
                       ],
                       [
                           "WhatIf",
                           "If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.",
                           "wi",
                           false,
                           "false",
                           ""
                       ],
                       [
                           "Confirm",
                           "If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.",
                           "cf",
                           false,
                           "false",
                           ""
                       ]
                   ],
        "Alias":  "",
        "Author":  "Chrissy LeMaire (@cl), netnerds.net",
        "Synopsis":  "Writes data to a SQL Server Table.",
        "Name":  "Write-DbaDataTable",
        "Links":  "https://dbatools.io/Write-DbaDataTable",
        "Examples":  "-------------------------- EXAMPLE 1 --------------------------\nPS C:\\\u003e$DataTable = Import-Csv C:\\temp\\customers.csv\nPS C:\\\u003e Write-DbaDataTable -SqlInstance sql2014 -InputObject $DataTable -Table mydb.dbo.customers\nPerforms a bulk insert of all the data in customers.csv into database mydb, schema dbo, table customers. A progress bar will be shown as rows are inserted. If the destination table does not exist, \r\nthe import will be halted.\n-------------------------- EXAMPLE 2 --------------------------\nPS C:\\\u003e$DataTable = Import-Csv C:\\temp\\customers.csv\nPS C:\\\u003e $DataTable | Write-DbaDataTable -SqlInstance sql2014 -Table mydb.dbo.customers\nPerforms a row by row insert of the data in customers.csv. This is significantly slower than a bulk insert and will not show a progress bar.\r\nThis method is not recommended. Use -InputObject instead.\n-------------------------- EXAMPLE 3 --------------------------\nPS C:\\\u003e$DataTable = Import-Csv C:\\temp\\customers.csv\nPS C:\\\u003e Write-DbaDataTable -SqlInstance sql2014 -InputObject $DataTable -Table mydb.dbo.customers -AutoCreateTable -Confirm\nPerforms a bulk insert of all the data in customers.csv. If mydb.dbo.customers does not exist, it will be created with inefficient but forgiving DataTypes.\nPrompts for confirmation before a variety of steps.\n-------------------------- EXAMPLE 4 --------------------------\nPS C:\\\u003e$DataTable = Import-Csv C:\\temp\\customers.csv\nPS C:\\\u003e Write-DbaDataTable -SqlInstance sql2014 -InputObject $DataTable -Table mydb.dbo.customers -Truncate\nPerforms a bulk insert of all the data in customers.csv. Prior to importing into mydb.dbo.customers, the user is informed that the table will be truncated and asks for confirmation. The user is \r\nprompted again to perform the import.\n-------------------------- EXAMPLE 5 --------------------------\nPS C:\\\u003e$DataTable = Import-Csv C:\\temp\\customers.csv\nPS C:\\\u003e Write-DbaDataTable -SqlInstance sql2014 -InputObject $DataTable -Database mydb -Table customers -KeepNulls\nPerforms a bulk insert of all the data in customers.csv into mydb.dbo.customers. Because Schema was not specified, dbo was used. NULL values in the destination table will be preserved.\n-------------------------- EXAMPLE 6 --------------------------\nPS C:\\\u003e$passwd = ConvertTo-SecureString \"P@ssw0rd\" -AsPlainText -Force\nPS C:\\\u003e $AzureCredential = New-Object System.Management.Automation.PSCredential(\"AzureAccount\"),$passwd)\r\nPS C:\\\u003e $DataTable = Import-Csv C:\\temp\\customers.csv\r\nPS C:\\\u003e Write-DbaDataTable -SqlInstance AzureDB.database.windows.net -InputObject $DataTable -Database mydb -Table customers -KeepNulls -Credential $AzureCredential -BulkCopyTimeOut 300\nThis performs the same operation as the previous example, but against a SQL Azure Database instance using the required credentials.\n-------------------------- EXAMPLE 7 --------------------------\nPS C:\\\u003e$process = Get-Process\nPS C:\\\u003e Write-DbaDataTable -InputObject $process -SqlInstance sql2014 -Table \"[[DbName]]].[Schema.With.Dots].[`\"[Process]]`\"]\" -AutoCreateTable\nCreates a table based on the Process object with over 60 columns, converted from PowerShell data types to SQL Server data types. After the table is created a bulk insert is performed to add process \r\ninformation into the table\r\nWrites the results of Get-Process to a table named: \"[Process]\" in schema named: Schema.With.Dots in database named: [DbName]\r\nThe Table name, Schema name and Database name must be wrapped in square brackets [ ]\r\nSpecial charcters like \" must be escaped by a ` charcter.\r\nIn addition any actual instance of the ] character must be escaped by being duplicated.\nThis is an example of the type conversion in action. All process properties are converted, including special types like TimeSpan. Script properties are resolved before the type conversion starts \r\nthanks to ConvertTo-DbaDataTable.",
        "Syntax":  "Write-DbaDataTable [-SqlInstance] \u003cDbaInstanceParameter\u003e [[-SqlCredential] \u003cPSCredential\u003e] [[-Database] \u003cObject\u003e] -InputObject \u003cObject\u003e [-Table] \u003cString\u003e [[-Schema] \u003cString\u003e] [-BatchSize \u003cInt32\u003e] [-NotifyAfter \u003cInt32\u003e] [-AutoCreateTable] [-NoTableLock] [-CheckConstraints] [-FireTriggers] [-KeepIdentity] [-KeepNulls] [-Truncate] [-bulkCopyTimeOut \u003cInt32\u003e] [-RegularUser] [-EnableException] [-UseDynamicStringLength] [-WhatIf] [-Confirm] [\u003cCommonParameters\u003e]"
    }
]

tools\dbatools\bin\XEtemplates\AlwaysOn Health Enhanced.xml

<event_sessions xmlns="http://schemas.microsoft.com/sqlserver/2008/07/extendedeventsconfig">
   <event_session name="AlwaysOn Health Enhanced" maxMemory="4" eventRetentionMode="allowSingleEventLoss" trackCausality="false" dispatchLatency="30" maxEventSize="0" memoryPartitionMode="none">
      <templateCategory><!-- _locID_text="templateCategory" _locComment = "" -->System Monitoring</templateCategory>
      <templateName><!-- _locID_text = "templateName" _locComment = "" -->AlwaysOn Health Enhanced</templateName>
      <templateDescription><!-- _locID_text = "templateDescription" _locComment = "" -->Enhanced version of AlwaysOn_health</templateDescription>
      <event package="sqlserver" name="alwayson_ddl_executed">
         <action package="sqlserver" name="server_instance_name" />
      </event>
      <event package="sqlserver" name="availability_group_lease_expired">
         <action package="sqlserver" name="server_instance_name" />
      </event>
      <event package="sqlserver" name="availability_replica_automatic_failover_validation">
         <action package="sqlserver" name="server_instance_name" />
      </event>
      <event package="sqlserver" name="availability_replica_manager_state_change">
         <action package="sqlserver" name="server_instance_name" />
      </event>
      <event package="sqlserver" name="availability_replica_state">
         <action package="sqlserver" name="server_instance_name" />
      </event>
      <event package="sqlserver" name="availability_replica_state_change">
         <action package="sqlserver" name="server_instance_name" />
      </event>
      <event package="sqlserver" name="error_reported">
         <action package="sqlserver" name="server_instance_name" />
         <predicate>
            <or>
               <or>
                  <or>
                     <or>
                        <or>
                           <or>
                              <or>
                                 <or>
                                    <or>
                                       <or>
                                          <or>
                                             <or>
                                                <or>
                                                   <or>
                                                      <or>
                                                         <or>
                                                            <or>
                                                               <or>
                                                                  <or>
                                                                     <or>
                                                                        <or>
                                                                           <or>
                                                                              <or>
                                                                                 <or>
                                                                                    <or>
                                                                                       <or>
                                                                                          <or>
                                                                                             <or>
                                                                                                <or>
                                                                                                   <or>
                                                                                                      <leaf>
                                                                                                         <comparator name="equal_int64" package="package0" />
                                                                                                         <event name="error_reported" package="sqlserver" field="error_number" />
                                                                                                         <value>9691</value>
                                                                                                      </leaf>
                                                                                                      <leaf>
                                                                                                         <comparator name="equal_int64" package="package0" />
                                                                                                         <event name="error_reported" package="sqlserver" field="error_number" />
                                                                                                         <value>35204</value>
                                                                                                      </leaf>
                                                                                                   </or>
                                                                                                   <leaf>
                                                                                                      <comparator name="equal_int64" package="package0" />
                                                                                                      <event name="error_reported" package="sqlserver" field="error_number" />
                                                                                                      <value>9693</value>
                                                                                                   </leaf>
                                                                                                </or>
                                                                                                <leaf>
                                                                                                   <comparator name="equal_int64" package="package0" />
                                                                                                   <event name="error_reported" package="sqlserver" field="error_number" />
                                                                                                   <value>26024</value>
                                                                                                </leaf>
                                                                                             </or>
                                                                                             <leaf>
                                                                                                <comparator name="equal_int64" package="package0" />
                                                                                                <event name="error_reported" package="sqlserver" field="error_number" />
                                                                                                <value>28047</value>
                                                                                             </leaf>
                                                                                          </or>
                                                                                          <leaf>
                                                                                             <comparator name="equal_int64" package="package0" />
                                                                                             <event name="error_reported" package="sqlserver" field="error_number" />
                                                                                             <value>26023</value>
                                                                                          </leaf>
                                                                                       </or>
                                                                                       <leaf>
                                                                                          <comparator name="equal_int64" package="package0" />
                                                                                          <event name="error_reported" package="sqlserver" field="error_number" />
                                                                                          <value>9692</value>
                                                                                       </leaf>
                                                                                    </or>
                                                                                    <leaf>
                                                                                       <comparator name="equal_int64" package="package0" />
                                                                                       <event name="error_reported" package="sqlserver" field="error_number" />
                                                                                       <value>28034</value>
                                                                                    </leaf>
                                                                                 </or>
                                                                                 <leaf>
                                                                                    <comparator name="equal_int64" package="package0" />
                                                                                    <event name="error_reported" package="sqlserver" field="error_number" />
                                                                                    <value>28036</value>
                                                                                 </leaf>
                                                                              </or>
                                                                              <leaf>
                                                                                 <comparator name="equal_int64" package="package0" />
                                                                                 <event name="error_reported" package="sqlserver" field="error_number" />
                                                                                 <value>28048</value>
                                                                              </leaf>
                                                                           </or>
                                                                           <leaf>
                                                                              <comparator name="equal_int64" package="package0" />
                                                                              <event name="error_reported" package="sqlserver" field="error_number" />
                                                                              <value>28080</value>
                                                                           </leaf>
                                                                        </or>
                                                                        <leaf>
                                                                           <comparator name="equal_int64" package="package0" />
                                                                           <event name="error_reported" package="sqlserver" field="error_number" />
                                                                           <value>28091</value>
                                                                        </leaf>
                                                                     </or>
                                                                     <leaf>
                                                                        <comparator name="equal_int64" package="package0" />
                                                                        <event name="error_reported" package="sqlserver" field="error_number" />
                                                                        <value>26022</value>
                                                                     </leaf>
                                                                  </or>
                                                                  <leaf>
                                                                     <comparator name="equal_int64" package="package0" />
                                                                     <event name="error_reported" package="sqlserver" field="error_number" />
                                                                     <value>9642</value>
                                                                  </leaf>
                                                               </or>
                                                               <leaf>
                                                                  <comparator name="equal_int64" package="package0" />
                                                                  <event name="error_reported" package="sqlserver" field="error_number" />
                                                                  <value>35201</value>
                                                               </leaf>
                                                            </or>
                                                            <leaf>
                                                               <comparator name="equal_int64" package="package0" />
                                                               <event name="error_reported" package="sqlserver" field="error_number" />
                                                               <value>35202</value>
                                                            </leaf>
                                                         </or>
                                                         <leaf>
                                                            <comparator name="equal_int64" package="package0" />
                                                            <event name="error_reported" package="sqlserver" field="error_number" />
                                                            <value>35206</value>
                                                         </leaf>
                                                      </or>
                                                      <leaf>
                                                         <comparator name="equal_int64" package="package0" />
                                                         <event name="error_reported" package="sqlserver" field="error_number" />
                                                         <value>35207</value>
                                                      </leaf>
                                                   </or>
                                                   <leaf>
                                                      <comparator name="equal_int64" package="package0" />
                                                      <event name="error_reported" package="sqlserver" field="error_number" />
                                                      <value>26069</value>
                                                   </leaf>
                                                </or>
                                                <leaf>
                                                   <comparator name="equal_int64" package="package0" />
                                                   <event name="error_reported" package="sqlserver" field="error_number" />
                                                   <value>26070</value>
                                                </leaf>
                                             </or>
                                             <and>
                                                <leaf>
                                                   <comparator name="greater_than_int64" package="package0" />
                                                   <event name="error_reported" package="sqlserver" field="error_number" />
                                                   <value>41047</value>
                                                </leaf>
                                                <leaf>
                                                   <comparator name="less_than_int64" package="package0" />
                                                   <event name="error_reported" package="sqlserver" field="error_number" />
                                                   <value>41056</value>
                                                </leaf>
                                             </and>
                                          </or>
                                          <leaf>
                                             <comparator name="equal_int64" package="package0" />
                                             <event name="error_reported" package="sqlserver" field="error_number" />
                                             <value>41142</value>
                                          </leaf>
                                       </or>
                                       <leaf>
                                          <comparator name="equal_int64" package="package0" />
                                          <event name="error_reported" package="sqlserver" field="error_number" />
                                          <value>41144</value>
                                       </leaf>
                                    </or>
                                    <leaf>
                                       <comparator name="equal_int64" package="package0" />
                                       <event name="error_reported" package="sqlserver" field="error_number" />
                                       <value>1480</value>
                                    </leaf>
                                 </or>
                                 <leaf>
                                    <comparator name="equal_int64" package="package0" />
                                    <event name="error_reported" package="sqlserver" field="error_number" />
                                    <value>823</value>
                                 </leaf>
                              </or>
                              <leaf>
                                 <comparator name="equal_int64" package="package0" />
                                 <event name="error_reported" package="sqlserver" field="error_number" />
                                 <value>824</value>
                              </leaf>
                           </or>
                           <leaf>
                              <comparator name="equal_int64" package="package0" />
                              <event name="error_reported" package="sqlserver" field="error_number" />
                              <value>829</value>
                           </leaf>
                        </or>
                        <leaf>
                           <comparator name="equal_int64" package="package0" />
                           <event name="error_reported" package="sqlserver" field="error_number" />
                           <value>35264</value>
                        </leaf>
                     </or>
                     <leaf>
                        <comparator name="equal_int64" package="package0" />
                        <event name="error_reported" package="sqlserver" field="error_number" />
                        <value>35265</value>
                     </leaf>
                  </or>
                  <leaf>
                     <comparator name="equal_int64" package="package0" />
                     <event name="error_reported" package="sqlserver" field="error_number" />
                     <value>41188</value>
                  </leaf>
               </or>
               <leaf>
                  <comparator name="equal_int64" package="package0" />
                  <event name="error_reported" package="sqlserver" field="error_number" />
                  <value>41189</value>
               </leaf>
            </or>
         </predicate>
      </event>
      <event package="sqlserver" name="hadr_db_partner_set_sync_state">
         <action package="sqlserver" name="server_instance_name" />
      </event>
      <event package="sqlserver" name="lock_redo_blocked">
         <action package="sqlserver" name="server_instance_name" />
      </event>
      <target package="package0" name="event_file">
         <parameter name="filename" value="AlwaysOn Health Enhanced" />
         <parameter name="max_file_size" value="5" />
         <parameter name="max_rollover_files" value="4" />
      </target>
   </event_session>
</event_sessions>

tools\dbatools\bin\dbatools-buildref-index.json

{
    "LastUpdated": "2018-11-14T00:00:00",
    "Data": [
    {
        "Version":  "8.0.47",
        "Name": "2000"
    },
    {
        "Version":  "8.0.78"
    },
    {
        "Version":  "8.0.100"
    },
    {
        "Version":  "8.0.190"
    },
    {
        "SP":  "RTM",
        "Version":  "8.0.194",
        "SupportedUntil":  "2000-11-30T00:00:00"
    },
    {
        "Version":  "8.0.204",
        "KBList":  "274329"
    },
    {
        "Version":  "8.0.205",
        "KBList":  "274330"
    },
    {
        "Version":  "8.0.210",
        "KBList":  "275900"
    },
    {
        "Version":  "8.0.211",
        "KBList":  "276329"
    },
    {
        "Version":  "8.0.217",
        "KBList":  "279293"
    },
    {
        "Version":  "8.0.218",
        "KBList":  "279183"
    },
    {
        "Version":  "8.0.222",
        "KBList":  "281769"
    },
    {
        "Version":  "8.0.223",
        "KBList":  "280380"
    },
    {
        "Version":  "8.0.225",
        "KBList":  "281663"
    },
    {
        "Version":  "8.0.226",
        "KBList":  "278239"
    },
    {
        "Version":  "8.0.231",
        "KBList":  "282279"
    },
    {
        "Version":  "8.0.233",
        "KBList":  "282416"
    },
    {
        "Version":  "8.0.239",
        "KBList":  "285290"
    },
    {
        "Version":  "8.0.249",
        "KBList":  "288122"
    },
    {
        "Version":  "8.0.250",
        "KBList":  "291683"
    },
    {
        "Version":  "8.0.251",
        "KBList":  "300194"
    },
    {
        "Version":  "8.0.287",
        "KBList":  "297209"
    },
    {
        "Version":  "8.0.296",
        "KBList":  "299717"
    },
    {
        "SP":  "SP1",
        "Version":  "8.0.384",
        "SupportedUntil":  "2002-02-28T00:00:00",
        "KBList":  "306908"
    },
    {
        "Version":  "8.0.428",
        "KBList":  "304850"
    },
    {
        "Version":  "8.0.443",
        "KBList":  "307538"
    },
    {
        "Version":  "8.0.444",
        "KBList":  [
                       "307655",
                       "30754"
                   ]
    },
    {
        "Version":  "8.0.452",
        "KBList":  "308547"
    },
    {
        "Version":  "8.0.469",
        "KBList":  "313005"
    },
    {
        "Version":  "8.0.471",
        "KBList":  "313302"
    },
    {
        "Version":  "8.0.473",
        "KBList":  "314003"
    },
    {
        "Version":  "8.0.474",
        "KBList":  "315395"
    },
    {
        "Version":  "8.0.475"
    },
    {
        "SP":  "SP2",
        "Version":  "8.0.532",
        "SupportedUntil":  "2003-04-07T00:00:00",
        "KBList":  "306908"
    },
    {
        "Version":  "8.0.534",
        "KBList":  "306908"
    },
    {
        "Version":  "8.0.552",
        "KBList":  [
                       "313002",
                       "313005"
                   ]
    },
    {
        "Version":  "8.0.558",
        "KBList":  [
                       "314003",
                       "315395"
                   ]
    },
    {
        "Version":  "8.0.561"
    },
    {
        "Version":  "8.0.568",
        "KBList":  "317748"
    },
    {
        "Version":  "8.0.578",
        "KBList":  [
                       "318405",
                       "317979"
                   ]
    },
    {
        "Version":  "8.0.584",
        "KBList":  "318530"
    },
    {
        "Version":  "8.0.594",
        "KBList":  [
                       "356774",
                       "319477"
                   ]
    },
    {
        "Version":  "8.0.599",
        "KBList":  "319869"
    },
    {
        "Version":  "8.0.604"
    },
    {
        "Version":  "8.0.608",
        "KBList":  "319507"
    },
    {
        "Version":  "8.0.644",
        "KBList":  "324186"
    },
    {
        "Version":  "8.0.650",
        "KBList":  "322853"
    },
    {
        "Version":  "8.0.652",
        "KBList":  "810010"
    },
    {
        "Version":  "8.0.655"
    },
    {
        "Version":  "8.0.661",
        "KBList":  "326999"
    },
    {
        "Version":  "8.0.665"
    },
    {
        "Version":  "8.0.667"
    },
    {
        "Version":  "8.0.678",
        "KBList":  "328354"
    },
    {
        "Version":  "8.0.679",
        "KBList":  "316333"
    },
    {
        "Version":  "8.0.682",
        "KBList":  "319851"
    },
    {
        "Version":  "8.0.686",
        "KBList":  "316333"
    },
    {
        "Version":  "8.0.688",
        "KBList":  "329487"
    },
    {
        "Version":  "8.0.689",
        "KBList":  "329499"
    },
    {
        "Version":  "8.0.690",
        "KBList":  "311104"
    },
    {
        "Version":  "8.0.693",
        "KBList":  "330212"
    },
    {
        "Version":  "8.0.695",
        "KBList":  [
                       "331965",
                       "331855"
                   ]
    },
    {
        "Version":  "8.0.696",
        "KBList":  [
                       "810052",
                       "810072"
                   ]
    },
    {
        "Version":  "8.0.700",
        "KBList":  "810072"
    },
    {
        "Version":  "8.0.701",
        "KBList":  [
                       "810163",
                       "810026"
                   ]
    },
    {
        "Version":  "8.0.702",
        "KBList":  "328551"
    },
    {
        "Version":  "8.0.703",
        "KBList":  "810526"
    },
    {
        "Version":  "8.0.705",
        "KBList":  "810920"
    },
    {
        "Version":  "8.0.710",
        "KBList":  "811052"
    },
    {
        "Version":  "8.0.713",
        "KBList":  "811205"
    },
    {
        "Version":  "8.0.714",
        "KBList":  "811478"
    },
    {
        "Version":  "8.0.715",
        "KBList":  [
                       "810688",
                       "811611"
                   ]
    },
    {
        "Version":  "8.0.718",
        "KBList":  "811703"
    },
    {
        "Version":  "8.0.721",
        "KBList":  [
                       "812393",
                       "81225"
                   ]
    },
    {
        "Version":  "8.0.723",
        "KBList":  "812798"
    },
    {
        "Version":  "8.0.725",
        "KBList":  [
                       "813494",
                       "812995"
                   ]
    },
    {
        "Version":  "8.0.728",
        "KBList":  "814460"
    },
    {
        "Version":  "8.0.730",
        "KBList":  "813769"
    },
    {
        "Version":  "8.0.733",
        "KBList":  "813759"
    },
    {
        "Version":  "8.0.735",
        "KBList":  "814889"
    },
    {
        "Version":  "8.0.736",
        "KBList":  "816937"
    },
    {
        "Version":  "8.0.741",
        "KBList":  "818096"
    },
    {
        "Version":  "8.0.743",
        "KBList":  [
                       "818406",
                       "818763"
                   ]
    },
    {
        "SP":  "SP3",
        "Version":  "8.0.760",
        "SupportedUntil":  "2007-07-10T00:00:00",
        "KBList":  "306908"
    },
    {
        "Version":  "8.0.762",
        "KBList":  "814032"
    },
    {
        "Version":  "8.0.763",
        "KBList":  "814113"
    },
    {
        "Version":  "8.0.765",
        "KBList":  [
                       "811611",
                       "810688",
                       "810163",
                       "813769"
                   ]
    },
    {
        "Version":  "8.0.769",
        "KBList":  [
                       "814892",
                       "814889"
                   ]
    },
    {
        "Version":  "8.0.775",
        "KBList":  "815115"
    },
    {
        "Version":  "8.0.779",
        "KBList":  "814035"
    },
    {
        "Version":  "8.0.780",
        "KBList":  [
                       "816084",
                       "816039",
                       "801185"
                   ]
    },
    {
        "Version":  "8.0.781",
        "KBList":  "815057"
    },
    {
        "Version":  "8.0.788",
        "KBList":  "816985"
    },
    {
        "Version":  "8.0.789",
        "KBList":  "816840"
    },
    {
        "Version":  "8.0.790",
        "KBList":  "817081"
    },
    {
        "Version":  "8.0.791",
        "KBList":  "815249"
    },
    {
        "Version":  "8.0.794",
        "KBList":  [
                       "817709",
                       "816440",
                       "813524",
                       "817464"
                   ]
    },
    {
        "Version":  "8.0.798",
        "KBList":  "817464"
    },
    {
        "Version":  "8.0.800",
        "KBList":  [
                       "818188",
                       "818097"
                   ]
    },
    {
        "Version":  "8.0.801",
        "KBList":  "181540"
    },
    {
        "Version":  "8.0.804",
        "KBList":  "818729"
    },
    {
        "Version":  "8.0.807",
        "KBList":  "818899"
    },
    {
        "Version":  "8.0.811",
        "KBList":  [
                       "891662",
                       "819248",
                       "818897"
                   ]
    },
    {
        "Version":  "8.0.814",
        "KBList":  "819662"
    },
    {
        "Version":  "8.0.816",
        "KBList":  "818766"
    },
    {
        "Version":  "8.0.818",
        "KBList":  [
                       "821280",
                       "826161",
                       "821277"
                   ]
    },
    {
        "Version":  "8.0.819",
        "KBList":  "826161"
    },
    {
        "Version":  "8.0.837",
        "KBList":  [
                       "823514",
                       "821740",
                       "821548",
                       "821741",
                       "820788"
                   ]
    },
    {
        "Version":  "8.0.839",
        "KBList":  [
                       "824027",
                       "823877"
                   ]
    },
    {
        "Version":  "8.0.840",
        "KBList":  "319477"
    },
    {
        "Version":  "8.0.841",
        "KBList":  "825225"
    },
    {
        "Version":  "8.0.842",
        "KBList":  "825043"
    },
    {
        "Version":  "8.0.844",
        "KBList":  "826080"
    },
    {
        "Version":  "8.0.845",
        "KBList":  [
                       "825854",
                       "826364"
                   ]
    },
    {
        "Version":  "8.0.847",
        "KBList":  "826433"
    },
    {
        "Version":  "8.0.848",
        "KBList":  "826822"
    },
    {
        "Version":  "8.0.850",
        "KBList":  [
                       "826906",
                       "826815",
                       "826860"
                   ]
    },
    {
        "Version":  "8.0.851",
        "KBList":  "826754"
    },
    {
        "Version":  "8.0.852",
        "KBList":  [
                       "827954",
                       "830466"
                   ]
    },
    {
        "Version":  "8.0.854",
        "KBList":  "828699"
    },
    {
        "Version":  "8.0.856",
        "KBList":  "828096"
    },
    {
        "Version":  "8.0.857",
        "KBList":  [
                       "828308",
                       "827714",
                       "828017"
                   ]
    },
    {
        "Version":  "8.0.858",
        "KBList":  "828637"
    },
    {
        "Version":  "8.0.859",
        "KBList":  "821334"
    },
    {
        "Version":  "8.0.863",
        "KBList":  [
                       "829444",
                       "829205"
                   ]
    },
    {
        "Version":  "8.0.865",
        "KBList":  [
                       "828945",
                       "830395"
                   ]
    },
    {
        "Version":  "8.0.866",
        "KBList":  "830366"
    },
    {
        "Version":  "8.0.869",
        "KBList":  "830588"
    },
    {
        "Version":  "8.0.870",
        "KBList":  "830262"
    },
    {
        "Version":  "8.0.871",
        "KBList":  [
                       "830860",
                       "830767"
                   ]
    },
    {
        "Version":  "8.0.873",
        "KBList":  "830887"
    },
    {
        "Version":  "8.0.876",
        "KBList":  [
                       "831997",
                       "830912"
                   ]
    },
    {
        "Version":  "8.0.878",
        "KBList":  "831950"
    },
    {
        "Version":  "8.0.879",
        "KBList":  "832977"
    },
    {
        "Version":  "8.0.891",
        "KBList":  "836141"
    },
    {
        "Version":  "8.0.892",
        "KBList":  "833710"
    },
    {
        "Version":  "8.0.904",
        "KBList":  "834453"
    },
    {
        "Version":  "8.0.908",
        "KBList":  "834290"
    },
    {
        "Version":  "8.0.910",
        "KBList":  "834798"
    },
    {
        "Version":  "8.0.911",
        "KBList":  "837957"
    },
    {
        "Version":  "8.0.913",
        "KBList":  "836651"
    },
    {
        "Version":  "8.0.915",
        "KBList":  "837401"
    },
    {
        "Version":  "8.0.916",
        "KBList":  "317989"
    },
    {
        "Version":  "8.0.919",
        "KBList":  "837957"
    },
    {
        "Version":  "8.0.922",
        "KBList":  "837970"
    },
    {
        "Version":  "8.0.923",
        "KBList":  "838460"
    },
    {
        "Version":  "8.0.926",
        "KBList":  "839523"
    },
    {
        "Version":  "8.0.927",
        "KBList":  "839688"
    },
    {
        "Version":  "8.0.928",
        "KBList":  "839589"
    },
    {
        "Version":  "8.0.929",
        "KBList":  "839529"
    },
    {
        "Version":  "8.0.933",
        "KBList":  "840856"
    },
    {
        "Version":  "8.0.934",
        "KBList":  "841404"
    },
    {
        "Version":  "8.0.935",
        "KBList":  "841404"
    },
    {
        "Version":  "8.0.936",
        "KBList":  "841627"
    },
    {
        "Version":  "8.0.937",
        "KBList":  "841776"
    },
    {
        "Version":  "8.0.944",
        "KBList":  "839280"
    },
    {
        "Version":  "8.0.948",
        "KBList":  "843263"
    },
    {
        "Version":  "8.0.949",
        "KBList":  "843266"
    },
    {
        "Version":  "8.0.952",
        "KBList":  [
                       "867880",
                       "867879",
                       "867878"
                   ]
    },
    {
        "Version":  "8.0.954",
        "KBList":  "843282"
    },
    {
        "Version":  "8.0.955",
        "KBList":  "867798"
    },
    {
        "Version":  "8.0.957",
        "KBList":  "870994"
    },
    {
        "Version":  "8.0.959",
        "KBList":  "878500"
    },
    {
        "Version":  "8.0.961",
        "KBList":  "873446"
    },
    {
        "Version":  "8.0.962",
        "KBList":  "883415"
    },
    {
        "Version":  "8.0.967",
        "KBList":  "878501"
    },
    {
        "Version":  "8.0.970",
        "KBList":  "872842"
    },
    {
        "Version":  "8.0.972",
        "KBList":  "885290"
    },
    {
        "Version":  "8.0.973",
        "KBList":  "884554"
    },
    {
        "Version":  "8.0.977",
        "KBList":  "888007"
    },
    {
        "Version":  "8.0.980",
        "KBList":  "887974"
    },
    {
        "Version":  "8.0.985",
        "KBList":  "889239"
    },
    {
        "Version":  "8.0.988",
        "KBList":  "889166"
    },
    {
        "Version":  "8.0.990",
        "KBList":  "890200"
    },
    {
        "Version":  "8.0.991",
        "KBList":  "889314"
    },
    {
        "Version":  "8.0.993",
        "KBList":  [
                       "890742",
                       "888444",
                       "890925"
                   ]
    },
    {
        "Version":  "8.0.994",
        "KBList":  [
                       "890767",
                       "890768",
                       "890942"
                   ]
    },
    {
        "Version":  "8.0.996",
        "KBList":  [
                       "891268",
                       "891017"
                   ]
    },
    {
        "Version":  "8.0.997",
        "KBList":  "891311"
    },
    {
        "Version":  "8.0.1000",
        "KBList":  "891585"
    },
    {
        "Version":  "8.0.1001",
        "KBList":  "892205"
    },
    {
        "Version":  "8.0.1003",
        "KBList":  "892923"
    },
    {
        "Version":  "8.0.1007",
        "KBList":  "893312"
    },
    {
        "Version":  "8.0.1009",
        "KBList":  "894257"
    },
    {
        "Version":  "8.0.1013",
        "KBList":  "891866"
    },
    {
        "Version":  "8.0.1014",
        "KBList":  [
                       "895187",
                       "895123"
                   ]
    },
    {
        "Version":  "8.0.1017",
        "KBList":  "896425"
    },
    {
        "Version":  "8.0.1019",
        "KBList":  "897572"
    },
    {
        "Version":  "8.0.1020",
        "KBList":  "896985"
    },
    {
        "Version":  "8.0.1021",
        "KBList":  "887700"
    },
    {
        "Version":  "8.0.1024",
        "KBList":  "898709"
    },
    {
        "Version":  "8.0.1025",
        "KBList":  [
                       "899430",
                       "899428"
                   ]
    },
    {
        "Version":  "8.0.1027",
        "KBList":  "900416"
    },
    {
        "Version":  "8.0.1029",
        "KBList":  "902852"
    },
    {
        "Version":  "8.0.1034",
        "KBList":  "915328"
    },
    {
        "Version":  "8.0.1035",
        "KBList":  "917593"
    },
    {
        "Version":  "8.0.1036",
        "KBList":  "929410"
    },
    {
        "Version":  "8.0.1037",
        "KBList":  "930484"
    },
    {
        "Version":  "8.0.1077",
        "KBList":  "983814"
    },
    {
        "Version":  "8.0.1547",
        "KBList":  "899410"
    },
    {
        "Version":  "8.0.2026"
    },
    {
        "SP":  [
                   "SP4",
                   "LATEST"
               ],
        "Version":  "8.0.2039",
        "SupportedUntil":  "2013-04-09T00:00:00",
        "KBList":  "306908"
    },
    {
        "Version":  "8.0.2040",
        "KBList":  "899761"
    },
    {
        "Version":  "8.0.2050",
        "KBList":  [
                       "941203",
                       "94811"
                   ]
    },
    {
        "Version":  "8.0.2055",
        "KBList":  "959240"
    },
    {
        "Version":  "8.0.2145",
        "KBList":  [
                       "826906",
                       "836651"
                   ]
    },
    {
        "Version":  "8.0.2147",
        "KBList":  "899410"
    },
    {
        "Version":  "8.0.2148",
        "KBList":  [
                       "899430",
                       "899431",
                       "900390",
                       "900404",
                       "901212",
                       "902150",
                       "902955"
                   ]
    },
    {
        "Version":  "8.0.2151",
        "KBList":  [
                       "903742",
                       "904244"
                   ]
    },
    {
        "Version":  "8.0.2156"
    },
    {
        "Version":  "8.0.2159",
        "KBList":  "907250"
    },
    {
        "Version":  "8.0.2162",
        "KBList":  "904660"
    },
    {
        "Version":  "8.0.2166",
        "KBList":  "909734"
    },
    {
        "Version":  "8.0.2168",
        "KBList":  "907813"
    },
    {
        "Version":  "8.0.2171",
        "KBList":  "909369"
    },
    {
        "Version":  "8.0.2172",
        "KBList":  "910707"
    },
    {
        "Version":  "8.0.2175",
        "KBList":  "911678"
    },
    {
        "Version":  "8.0.2180",
        "KBList":  [
                       "913684",
                       "913789"
                   ]
    },
    {
        "Version":  "8.0.2187",
        "KBList":  [
                       "916287",
                       "914384",
                       "898709",
                       "915065",
                       "915340"
                   ]
    },
    {
        "Version":  "8.0.2189",
        "KBList":  [
                       "916652",
                       "913438"
                   ]
    },
    {
        "Version":  "8.0.2191",
        "KBList":  [
                       "826906",
                       "836651"
                   ]
    },
    {
        "Version":  "8.0.2192",
        "KBList":  "917606"
    },
    {
        "Version":  "8.0.2194",
        "KBList":  [
                       "917972",
                       "917565"
                   ]
    },
    {
        "Version":  "8.0.2196",
        "KBList":  "919165"
    },
    {
        "Version":  "8.0.2197",
        "KBList":  [
                       "919133",
                       "919068",
                       "919399"
                   ]
    },
    {
        "Version":  "8.0.2199",
        "KBList":  "919221"
    },
    {
        "Version":  "8.0.2201",
        "KBList":  "920930"
    },
    {
        "Version":  "8.0.2207",
        "KBList":  "923344"
    },
    {
        "Version":  "8.0.2209",
        "KBList":  "923797"
    },
    {
        "Version":  "8.0.2215",
        "KBList":  [
                       "924662",
                       "923563",
                       "923796"
                   ]
    },
    {
        "Version":  "8.0.2217",
        "KBList":  "924664"
    },
    {
        "Version":  "8.0.2218",
        "KBList":  "925297"
    },
    {
        "Version":  "8.0.2223",
        "KBList":  [
                       "925678",
                       "925419"
                   ]
    },
    {
        "Version":  "8.0.2226",
        "KBList":  [
                       "925684",
                       "925732"
                   ]
    },
    {
        "Version":  "8.0.2229",
        "KBList":  "927186"
    },
    {
        "Version":  "8.0.2231",
        "KBList":  "928079"
    },
    {
        "Version":  "8.0.2232",
        "KBList":  "928568"
    },
    {
        "Version":  "8.0.2234",
        "KBList":  [
                       "929440",
                       "929131"
                   ]
    },
    {
        "Version":  "8.0.2236",
        "KBList":  "930484"
    },
    {
        "Version":  "8.0.2238",
        "KBList":  "931932"
    },
    {
        "Version":  "8.0.2242",
        "KBList":  "929131"
    },
    {
        "Version":  "8.0.2244",
        "KBList":  "934203"
    },
    {
        "Version":  "8.0.2245",
        "KBList":  "933573"
    },
    {
        "Version":  "8.0.2246",
        "KBList":  "935465"
    },
    {
        "Version":  "8.0.2248",
        "KBList":  "935950"
    },
    {
        "Version":  "8.0.2249",
        "KBList":  "936232"
    },
    {
        "Version":  "8.0.2253",
        "KBList":  "939317"
    },
    {
        "Version":  "8.0.2265",
        "KBList":  "944985"
    },
    {
        "Version":  "8.0.2271",
        "KBList":  "946584"
    },
    {
        "Version":  "8.0.2273",
        "KBList":  [
                       "941203",
                       "948111"
                   ]
    },
    {
        "Version":  "8.0.2279",
        "KBList":  "959678"
    },
    {
        "Version":  "8.0.2282",
        "KBList":  "960083"
    },
    {
        "Version":  "8.0.2283",
        "KBList":  "971524"
    },
    {
        "Version":  "8.0.2301",
        "KBList":  "983809"
    },
    {
        "Version":  "8.0.2305",
        "KBList":  "983811"
    },
    {
        "Version":  "9.0.0",
        "Name": "2005"
    },
    {
        "SP":  "RTM",
        "Version":  "9.0.1399",
        "SupportedUntil":  "2007-07-10T00:00:00"
    },
    {
        "Version":  "9.0.1406",
        "KBList":  "932557"
    },
    {
        "Version":  "9.0.1500",
        "KBList":  "910416"
    },
    {
        "Version":  "9.0.1502",
        "KBList":  "915793"
    },
    {
        "Version":  "9.0.1503",
        "KBList":  "911662"
    },
    {
        "Version":  "9.0.1514",
        "KBList":  "912471"
    },
    {
        "Version":  "9.0.1518",
        "KBList":  [
                       "913371",
                       "912472",
                       "913941"
                   ]
    },
    {
        "Version":  "9.0.1519",
        "KBList":  "913494"
    },
    {
        "Version":  "9.0.1528",
        "KBList":  [
                       "915122",
                       "915306",
                       "915307",
                       "915308",
                       "915309"
                   ]
    },
    {
        "Version":  "9.0.1531",
        "KBList":  "915918"
    },
    {
        "Version":  "9.0.1532",
        "KBList":  "916046"
    },
    {
        "Version":  "9.0.1533",
        "KBList":  "916086"
    },
    {
        "Version":  "9.0.1534",
        "KBList":  "916706"
    },
    {
        "Version":  "9.0.1536",
        "KBList":  "917016"
    },
    {
        "Version":  "9.0.1538",
        "KBList":  "917824"
    },
    {
        "Version":  "9.0.1539",
        "KBList":  "917738"
    },
    {
        "Version":  "9.0.1541",
        "KBList":  [
                       "917971",
                       "917888"
                   ]
    },
    {
        "Version":  "9.0.1545",
        "KBList":  "917905"
    },
    {
        "Version":  "9.0.1547",
        "KBList":  "918276"
    },
    {
        "Version":  "9.0.1550",
        "KBList":  [
                       "921106",
                       "917887"
                   ]
    },
    {
        "Version":  "9.0.1551",
        "KBList":  [
                       "922804",
                       "922527"
                   ]
    },
    {
        "Version":  "9.0.1554",
        "KBList":  "926292"
    },
    {
        "Version":  "9.0.1558",
        "KBList":  "926493"
    },
    {
        "Version":  "9.0.1561",
        "KBList":  "932556"
    },
    {
        "Version":  "9.0.2029"
    },
    {
        "Version":  "9.0.2040"
    },
    {
        "SP":  "SP1",
        "Version":  "9.0.2047",
        "SupportedUntil":  "2008-04-08T00:00:00",
        "KBList":  "913090"
    },
    {
        "Version":  "9.0.2050",
        "KBList":  "932555"
    },
    {
        "Version":  "9.0.2153",
        "KBList":  [
                       "919224",
                       "918222"
                   ]
    },
    {
        "Version":  "9.0.2156",
        "KBList":  "919611"
    },
    {
        "Version":  "9.0.2164",
        "KBList":  [
                       "919775",
                       "919636",
                       "918882",
                       "920206",
                       "921003",
                       "919929",
                       "920347",
                       "920346",
                       "919243"
                   ]
    },
    {
        "Version":  "9.0.2167",
        "KBList":  "920974"
    },
    {
        "Version":  "9.0.2174",
        "KBList":  "922063"
    },
    {
        "Version":  "9.0.2175",
        "KBList":  [
                       "921536",
                       "922438",
                       "922578",
                       "917905",
                       "921395"
                   ]
    },
    {
        "Version":  "9.0.2176",
        "KBList":  [
                       "923296",
                       "922594"
                   ]
    },
    {
        "Version":  "9.0.2181",
        "KBList":  [
                       "923634",
                       "923605"
                   ]
    },
    {
        "Version":  "9.0.2187",
        "KBList":  "923849"
    },
    {
        "Version":  "9.0.2189",
        "KBList":  "925153"
    },
    {
        "Version":  "9.0.2190",
        "KBList":  "925227"
    },
    {
        "Version":  "9.0.2191",
        "KBList":  "925135"
    },
    {
        "Version":  "9.0.2192",
        "KBList":  [
                       "925335",
                       "924954"
                   ]
    },
    {
        "Version":  "9.0.2194",
        "KBList":  "925744"
    },
    {
        "Version":  "9.0.2195",
        "KBList":  "926240"
    },
    {
        "Version":  "9.0.2196",
        "KBList":  [
                       "926335",
                       "926285"
                   ]
    },
    {
        "Version":  "9.0.2198",
        "KBList":  [
                       "925277",
                       "924808",
                       "926611",
                       "926773",
                       "926612",
                       "924624",
                       "924807",
                       "926106",
                       "926613"
                   ]
    },
    {
        "Version":  "9.0.2201",
        "KBList":  "927289"
    },
    {
        "Version":  "9.0.2202",
        "KBList":  "927643"
    },
    {
        "Version":  "9.0.2206",
        "KBList":  [
                       "928529",
                       "926493",
                       "928537",
                       "928083"
                   ]
    },
    {
        "Version":  "9.0.2207",
        "KBList":  [
                       "928789",
                       "928732",
                       "928394"
                   ]
    },
    {
        "Version":  "9.0.2208",
        "KBList":  "929179"
    },
    {
        "Version":  "9.0.2209",
        "KBList":  "929278"
    },
    {
        "Version":  "9.0.2211",
        "KBList":  [
                       "930283",
                       "930284"
                   ]
    },
    {
        "Version":  "9.0.2214",
        "KBList":  [
                       "929240",
                       "930505"
                   ]
    },
    {
        "Version":  "9.0.2216",
        "KBList":  "931821"
    },
    {
        "Version":  "9.0.2218",
        "KBList":  "931843"
    },
    {
        "Version":  "9.0.2219",
        "KBList":  "932115"
    },
    {
        "Version":  "9.0.2221",
        "KBList":  "931593"
    },
    {
        "Version":  "9.0.2223",
        "KBList":  "932393"
    },
    {
        "Version":  "9.0.2226",
        "KBList":  [
                       "933762",
                       "934065"
                   ]
    },
    {
        "Version":  "9.0.2227",
        "KBList":  "933265"
    },
    {
        "Version":  "9.0.2229",
        "KBList":  "935446"
    },
    {
        "Version":  "9.0.2230",
        "KBList":  "936179"
    },
    {
        "Version":  "9.0.2231",
        "KBList":  "934812"
    },
    {
        "Version":  "9.0.2232",
        "KBList":  "937277"
    },
    {
        "Version":  "9.0.2233",
        "KBList":  [
                       "937544",
                       "933499",
                       "937545"
                   ]
    },
    {
        "Version":  "9.0.2234",
        "KBList":  "937343"
    },
    {
        "Version":  "9.0.2236",
        "KBList":  [
                       "940286",
                       "940287"
                   ]
    },
    {
        "Version":  "9.0.2237",
        "KBList":  "940719"
    },
    {
        "Version":  "9.0.2239",
        "KBList":  "940961"
    },
    {
        "Version":  "9.0.2242",
        "KBList":  [
                       "943888",
                       "943389"
                   ]
    },
    {
        "Version":  "9.0.2243",
        "KBList":  "944968"
    },
    {
        "Version":  "9.0.2245",
        "KBList":  "933573"
    },
    {
        "Version":  "9.0.2249",
        "KBList":  "948344"
    },
    {
        "Version":  "9.0.3026",
        "KBList":  "929376"
    },
    {
        "Version":  "9.0.3027"
    },
    {
        "Version":  "9.0.3033"
    },
    {
        "SP":  "SP2",
        "Version":  "9.0.3042",
        "SupportedUntil":  "2010-01-12T00:00:00",
        "KBList":  "921896"
    },
    {
        "Version":  "9.0.3043",
        "KBList":  "933508"
    },
    {
        "Version":  "9.0.3050",
        "KBList":  "933508"
    },
    {
        "Version":  "9.0.3054",
        "KBList":  "934458"
    },
    {
        "Version":  "9.0.3068",
        "KBList":  "948109"
    },
    {
        "Version":  "9.0.3073",
        "KBList":  "954606"
    },
    {
        "Version":  "9.0.3077",
        "KBList":  "959420"
    },
    {
        "Version":  "9.0.3080",
        "KBList":  "970895"
    },
    {
        "Version":  "9.0.3152"
    },
    {
        "Version":  "9.0.3153",
        "KBList":  "937137"
    },
    {
        "Version":  "9.0.3154",
        "KBList":  "937137"
    },
    {
        "Version":  "9.0.3155",
        "KBList":  "937137"
    },
    {
        "Version":  "9.0.3156"
    },
    {
        "Version":  "9.0.3159"
    },
    {
        "Version":  "9.0.3161",
        "CU":  "CU1"
    },
    {
        "Version":  "9.0.3162",
        "KBList":  "937137"
    },
    {
        "Version":  "9.0.3166",
        "KBList":  "937137"
    },
    {
        "Version":  "9.0.3169",
        "KBList":  "937137"
    },
    {
        "Version":  "9.0.3171",
        "KBList":  "937745"
    },
    {
        "Version":  "9.0.3175",
        "CU":  "CU2"
    },
    {
        "Version":  "9.0.3177",
        "KBList":  "937137"
    },
    {
        "Version":  "9.0.3178",
        "KBList":  "937137"
    },
    {
        "Version":  "9.0.3179",
        "KBList":  "937137"
    },
    {
        "Version":  "9.0.3180",
        "KBList":  "939942"
    },
    {
        "Version":  "9.0.3182",
        "KBList":  "937137"
    },
    {
        "Version":  "9.0.3186",
        "CU":  "CU3"
    },
    {
        "Version":  "9.0.3194",
        "KBList":  "937137"
    },
    {
        "Version":  "9.0.3195"
    },
    {
        "Version":  "9.0.3200",
        "CU":  "CU4"
    },
    {
        "Version":  "9.0.3203",
        "KBList":  "937137"
    },
    {
        "Version":  "9.0.3205",
        "KBList":  "937137"
    },
    {
        "Version":  "9.0.3206"
    },
    {
        "Version":  "9.0.3208"
    },
    {
        "Version":  "9.0.3209"
    },
    {
        "Version":  "9.0.3215",
        "CU":  "CU5"
    },
    {
        "Version":  "9.0.3221",
        "KBList":  [
                       "942908",
                       "945442",
                       "945443",
                       "945916"
                   ]
    },
    {
        "Version":  "9.0.3222",
        "KBList":  [
                       "945640",
                       "945641",
                       "947196",
                       "947197"
                   ]
    },
    {
        "Version":  "9.0.3224",
        "KBList":  "947463"
    },
    {
        "Version":  "9.0.3228",
        "CU":  "CU6"
    },
    {
        "Version":  "9.0.3230",
        "KBList":  "949199"
    },
    {
        "Version":  "9.0.3231",
        "KBList":  [
                       "949595",
                       "949687"
                   ]
    },
    {
        "Version":  "9.0.3232",
        "KBList":  "949959"
    },
    {
        "Version":  "9.0.3233",
        "KBList":  "948108"
    },
    {
        "Version":  "9.0.3235",
        "KBList":  "950189"
    },
    {
        "Version":  "9.0.3239",
        "CU":  "CU7"
    },
    {
        "Version":  "9.0.3240",
        "KBList":  "951204"
    },
    {
        "Version":  "9.0.3242",
        "KBList":  "951190"
    },
    {
        "Version":  "9.0.3244",
        "KBList":  "952330"
    },
    {
        "Version":  "9.0.3246",
        "KBList":  "952233"
    },
    {
        "CU":  "CU8",
        "Version":  "9.0.3257",
        "KBList":  "951217"
    },
    {
        "Version":  "9.0.3259",
        "KBList":  [
                       "954669",
                       "954831"
                   ]
    },
    {
        "Version":  "9.0.3260",
        "KBList":  "954950"
    },
    {
        "Version":  "9.0.3282",
        "CU":  "CU9"
    },
    {
        "Version":  "9.0.3294",
        "CU":  "CU10"
    },
    {
        "CU":  "CU11",
        "Version":  "9.0.3301",
        "KBList":  "958735"
    },
    {
        "Version":  "9.0.3302",
        "KBList":  [
                       "961479",
                       "961648"
                   ]
    },
    {
        "Version":  "9.0.3303",
        "KBList":  "962290"
    },
    {
        "Version":  "9.0.3310",
        "KBList":  "960090"
    },
    {
        "CU":  "CU12",
        "Version":  "9.0.3315",
        "KBList":  "962970"
    },
    {
        "Version":  "9.0.3318",
        "KBList":  "967199"
    },
    {
        "Version":  "9.0.3320",
        "KBList":  "969142"
    },
    {
        "CU":  "CU13",
        "Version":  "9.0.3325",
        "KBList":  "967908"
    },
    {
        "Version":  "9.0.3327",
        "CU":  "CU14"
    },
    {
        "CU":  "CU15",
        "Version":  "9.0.3328",
        "KBList":  "970278"
    },
    {
        "Version":  "9.0.3353",
        "KBList":  "970896"
    },
    {
        "CU":  "CU16",
        "Version":  "9.0.3355",
        "KBList":  "974647"
    },
    {
        "CU":  "CU17",
        "Version":  "9.0.3356",
        "KBList":  "976952"
    },
    {
        "Version":  "9.0.4028"
    },
    {
        "SP":  "SP3",
        "Version":  "9.0.4035",
        "SupportedUntil":  "2012-01-10T00:00:00"
    },
    {
        "Version":  "9.0.4053",
        "KBList":  "970892"
    },
    {
        "Version":  "9.0.4060",
        "KBList":  "2494113"
    },
    {
        "Version":  "9.0.4207",
        "CU":  "CU1"
    },
    {
        "Version":  "9.0.4211",
        "CU":  "CU2"
    },
    {
        "Version":  "9.0.4216",
        "KBList":  "967101"
    },
    {
        "CU":  "CU3",
        "Version":  "9.0.4220",
        "KBList":  "967909"
    },
    {
        "Version":  "9.0.4224",
        "KBList":  "917606"
    },
    {
        "Version":  "9.0.4226",
        "CU":  "CU4"
    },
    {
        "CU":  "CU5",
        "Version":  "9.0.4230",
        "KBList":  "972511"
    },
    {
        "Version":  "9.0.4262",
        "KBList":  "970894"
    },
    {
        "CU":  "CU6",
        "Version":  "9.0.4266",
        "KBList":  "974648"
    },
    {
        "Version":  "9.0.4268",
        "KBList":  "977151"
    },
    {
        "CU":  "CU7",
        "Version":  "9.0.4273",
        "KBList":  "976951"
    },
    {
        "CU":  "CU8",
        "Version":  "9.0.4285",
        "KBList":  "978915"
    },
    {
        "CU":  "CU9",
        "Version":  "9.0.4294",
        "KBList":  "980176"
    },
    {
        "CU":  "CU10",
        "Version":  "9.0.4305",
        "KBList":  "983329"
    },
    {
        "CU":  "CU11",
        "Version":  "9.0.4309",
        "KBList":  "2258854"
    },
    {
        "CU":  "CU12",
        "Version":  "9.0.4311",
        "KBList":  "2345449"
    },
    {
        "CU":  "CU13",
        "Version":  "9.0.4315",
        "KBList":  "2438344"
    },
    {
        "CU":  "CU14",
        "Version":  "9.0.4317",
        "KBList":  "2489375"
    },
    {
        "CU":  "CU15",
        "Version":  "9.0.4325",
        "KBList":  "2507766"
    },
    {
        "Version":  "9.0.4340",
        "KBList":  "2494112"
    },
    {
        "Version":  "9.0.4912"
    },
    {
        "SP":  [
                   "SP4",
                   "LATEST"
               ],
        "Version":  "9.0.5000",
        "SupportedUntil":  "2016-04-12T00:00:00",
        "KBList":  "2463332"
    },
    {
        "Version":  "9.0.5057",
        "KBList":  "2494120"
    },
    {
        "Version":  "9.0.5069",
        "KBList":  "2716429"
    },
    {
        "CU":  "CU1",
        "Version":  "9.0.5254",
        "KBList":  "2464079"
    },
    {
        "CU":  "CU2",
        "Version":  "9.0.5259",
        "KBList":  "2489409"
    },
    {
        "CU":  "CU3",
        "Version":  "9.0.5266",
        "KBList":  "2507769"
    },
    {
        "Version":  "9.0.5292",
        "KBList":  "2494123"
    },
    {
        "Version":  "9.0.5294",
        "KBList":  "2572407"
    },
    {
        "Version":  "9.0.5295",
        "KBList":  "2598903"
    },
    {
        "Version":  "9.0.5296",
        "KBList":  "2615425"
    },
    {
        "Version":  "9.0.5324",
        "KBList":  "2716427"
    },
    {
        "Version":  "10.0.0",
        "Name": "2008"
    },
    {
        "Version":  "10.0.1019"
    },
    {
        "Version":  "10.0.1049"
    },
    {
        "Version":  "10.0.1075"
    },
    {
        "Version":  "10.0.1300"
    },
    {
        "Version":  "10.0.1442"
    },
    {
        "SP":  "RTM",
        "Version":  "10.0.1600",
        "SupportedUntil":  "2010-04-13T00:00:00"
    },
    {
        "Version":  "10.0.1750",
        "KBList":  "956718"
    },
    {
        "Version":  "10.0.1755",
        "KBList":  "957387"
    },
    {
        "CU":  "CU1",
        "Version":  "10.0.1763",
        "KBList":  "956717"
    },
    {
        "Version":  "10.0.1767",
        "KBList":  "958208"
    },
    {
        "Version":  "10.0.1771",
        "KBList":  "958611"
    },
    {
        "CU":  "CU2",
        "Version":  "10.0.1779",
        "KBList":  "958186"
    },
    {
        "CU":  "CU3",
        "Version":  "10.0.1787",
        "KBList":  "960484"
    },
    {
        "CU":  "CU4",
        "Version":  "10.0.1798",
        "KBList":  "963036"
    },
    {
        "CU":  "CU5",
        "Version":  "10.0.1806",
        "KBList":  "969531"
    },
    {
        "CU":  "CU6",
        "Version":  "10.0.1812",
        "KBList":  "971490"
    },
    {
        "CU":  "CU7",
        "Version":  "10.0.1818",
        "KBList":  "973601"
    },
    {
        "CU":  "CU8",
        "Version":  "10.0.1823",
        "KBList":  "975976"
    },
    {
        "CU":  "CU9",
        "Version":  "10.0.1828",
        "KBList":  "977444"
    },
    {
        "CU":  "CU10",
        "Version":  "10.0.1835",
        "KBList":  "979064"
    },
    {
        "Version":  "10.0.2520",
        "KBList":  "968369"
    },
    {
        "SP":  "SP1",
        "Version":  "10.0.2531",
        "SupportedUntil":  "2011-10-11T00:00:00",
        "KBList":  "968369"
    },
    {
        "Version":  "10.0.2573",
        "KBList":  "2494096"
    },
    {
        "CU":  "CU1",
        "Version":  "10.0.2710",
        "KBList":  "969099"
    },
    {
        "Version":  "10.0.2712",
        "KBList":  "970507"
    },
    {
        "CU":  "CU2",
        "Version":  "10.0.2714",
        "KBList":  "970315"
    },
    {
        "CU":  "CU3",
        "Version":  "10.0.2723",
        "KBList":  "971491"
    },
    {
        "CU":  "CU4",
        "Version":  "10.0.2734",
        "KBList":  "973602"
    },
    {
        "Version":  "10.0.2740",
        "KBList":  "976761"
    },
    {
        "CU":  "CU5",
        "Version":  "10.0.2746",
        "KBList":  "975977"
    },
    {
        "CU":  "CU6",
        "Version":  "10.0.2757",
        "KBList":  "977443"
    },
    {
        "CU":  "CU7",
        "Version":  "10.0.2766",
        "KBList":  "979065"
    },
    {
        "CU":  "CU8",
        "Version":  "10.0.2775",
        "KBList":  "981702"
    },
    {
        "Version":  "10.0.2787",
        "KBList":  "2231277"
    },
    {
        "CU":  "CU9",
        "Version":  "10.0.2789",
        "KBList":  "2083921"
    },
    {
        "CU":  "CU10",
        "Version":  "10.0.2799",
        "KBList":  "2279604"
    },
    {
        "CU":  "CU11",
        "Version":  "10.0.2804",
        "KBList":  "2413738"
    },
    {
        "CU":  "CU12",
        "Version":  "10.0.2808",
        "KBList":  "2467236"
    },
    {
        "CU":  "CU13",
        "Version":  "10.0.2816",
        "KBList":  "2497673"
    },
    {
        "CU":  "CU14",
        "Version":  "10.0.2821",
        "KBList":  "2527187"
    },
    {
        "Version":  "10.0.2841"
    },
    {
        "CU":  "CU15",
        "Version":  "10.0.2847",
        "KBList":  "2555406"
    },
    {
        "CU":  "CU16",
        "Version":  "10.0.2850",
        "KBList":  "2582282"
    },
    {
        "Version":  "10.0.3798",
        "KBList":  "979450"
    },
    {
        "SP":  "SP2",
        "Version":  "10.0.4000",
        "SupportedUntil":  "2012-10-09T00:00:00",
        "KBList":  "979450"
    },
    {
        "Version":  "10.0.4064",
        "KBList":  "2494088"
    },
    {
        "Version":  "10.0.4067",
        "KBList":  "2716434"
    },
    {
        "CU":  "CU1",
        "Version":  "10.0.4266",
        "KBList":  "2289254"
    },
    {
        "CU":  "CU2",
        "Version":  "10.0.4272",
        "KBList":  "2467239"
    },
    {
        "CU":  "CU3",
        "Version":  "10.0.4279",
        "KBList":  "2498535"
    },
    {
        "CU":  "CU4",
        "Version":  "10.0.4285",
        "KBList":  "2527180"
    },
    {
        "CU":  "CU5",
        "Version":  "10.0.4316",
        "KBList":  "2555408"
    },
    {
        "CU":  "CU6",
        "Version":  "10.0.4321",
        "KBList":  "2582285"
    },
    {
        "CU":  "CU7",
        "Version":  "10.0.4323",
        "KBList":  "2617148"
    },
    {
        "CU":  "CU8",
        "Version":  "10.0.4326",
        "KBList":  "2648096"
    },
    {
        "CU":  "CU9",
        "Version":  "10.0.4330",
        "KBList":  "2402659"
    },
    {
        "CU":  "CU10",
        "Version":  "10.0.4332",
        "KBList":  "2696625"
    },
    {
        "CU":  "CU11",
        "Version":  "10.0.4333",
        "KBList":  "2715951"
    },
    {
        "Version":  "10.0.4371",
        "KBList":  "2716433"
    },
    {
        "Version":  "10.0.5416",
        "KBList":  "2546945"
    },
    {
        "SP":  "SP3",
        "Version":  "10.0.5500",
        "SupportedUntil":  "2015-10-13T00:00:00",
        "KBList":  "2546951"
    },
    {
        "Version":  "10.0.5512",
        "KBList":  "2716436"
    },
    {
        "Version":  "10.0.5520",
        "KBList":  "2977321"
    },
    {
        "Version":  "10.0.5538",
        "KBList":  "3045305"
    },
    {
        "Version":  "10.0.5544",
        "KBList":  "3135244"
    },
    {
        "CU":  "CU1",
        "Version":  "10.0.5766",
        "KBList":  "2617146"
    },
    {
        "CU":  "CU2",
        "Version":  "10.0.5768",
        "KBList":  "2633143"
    },
    {
        "CU":  "CU3",
        "Version":  "10.0.5770",
        "KBList":  "2648098"
    },
    {
        "CU":  "CU4",
        "Version":  "10.0.5775",
        "KBList":  "2673383"
    },
    {
        "CU":  "CU5",
        "Version":  "10.0.5785",
        "KBList":  "2696626"
    },
    {
        "CU":  "CU6",
        "Version":  "10.0.5788",
        "KBList":  "271953"
    },
    {
        "CU":  "CU7",
        "Version":  "10.0.5794",
        "KBList":  "2738350"
    },
    {
        "Version":  "10.0.5826",
        "KBList":  "2716435"
    },
    {
        "CU":  "CU8",
        "Version":  "10.0.5828",
        "KBList":  "2771833"
    },
    {
        "CU":  "CU9",
        "Version":  "10.0.5829",
        "KBList":  "2799883"
    },
    {
        "Version":  "10.0.5835",
        "KBList":  "2814783"
    },
    {
        "CU":  "CU10",
        "Version":  "10.0.5840",
        "KBList":  "2834048"
    },
    {
        "CU":  "CU11",
        "Version":  "10.0.5841",
        "KBList":  "2834048"
    },
    {
        "CU":  "CU12",
        "Version":  "10.0.5844",
        "KBList":  "2863205"
    },
    {
        "CU":  "CU13",
        "Version":  "10.0.5846",
        "KBList":  "2880350"
    },
    {
        "CU":  "CU14",
        "Version":  "10.0.5848",
        "KBList":  "2893410"
    },
    {
        "CU":  "CU15",
        "Version":  "10.0.5850",
        "KBList":  "2923520"
    },
    {
        "CU":  "CU16",
        "Version":  "10.0.5852",
        "KBList":  "2936421"
    },
    {
        "CU":  "CU17",
        "Version":  "10.0.5861",
        "KBList":  "2958696"
    },
    {
        "Version":  "10.0.5867",
        "KBList":  "2877204"
    },
    {
        "Version":  "10.0.5869",
        "KBList":  "2977322"
    },
    {
        "Version":  "10.0.5890",
        "KBList":  "3045303"
    },
    {
        "Version":  "10.0.5894",
        "KBList":  "3135244"
    },
    {
        "SP":  [
                   "SP4",
                   "LATEST"
               ],
        "Version":  "10.0.6000",
        "SupportedUntil":  "2019-07-09T00:00:00",
        "KBList":  "2979596"
    },
    {
        "Version":  "10.0.6241",
        "KBList":  "3045311"
    },
    {
        "Version":  "10.0.6526",
        "KBList":  "3034373"
    },
    {
        "Version":  "10.0.6535",
        "KBList":  "3045308"
    },
    {
        "Version":  "10.0.6543",
        "KBList":  "3135244"
    },
    {
        "Version":  "10.0.6547",
        "KBList":  "3146034"
    },
    {
        "Version": "10.0.6556",
        "KBList": "4057114"
    },
    {
        "Version":  "10.50.1092",
        "Name": "2008R2"
    },
    {
        "Version":  "10.50.1352"
    },
    {
        "SP":  "RTM",
        "Version":  "10.50.1600",
        "SupportedUntil":  "2012-07-10T00:00:00"
    },
    {
        "Version":  "10.50.1617",
        "KBList":  "2494088"
    },
    {
        "CU":  "CU1",
        "Version":  "10.50.1702",
        "KBList":  "981355"
    },
    {
        "CU":  "CU2",
        "Version":  "10.50.1720",
        "KBList":  "2072493"
    },
    {
        "CU":  "CU3",
        "Version":  "10.50.1734",
        "KBList":  "2261464"
    },
    {
        "CU":  "CU4",
        "Version":  "10.50.1746",
        "KBList":  "2345451"
    },
    {
        "CU":  "CU5",
        "Version":  "10.50.1753",
        "KBList":  "2438347"
    },
    {
        "CU":  "CU6",
        "Version":  "10.50.1765",
        "KBList":  "2489376"
    },
    {
        "Version":  "10.50.1769",
        "KBList":  "2520808"
    },
    {
        "CU":  "CU7",
        "Version":  "10.50.1777",
        "KBList":  "2507770"
    },
    {
        "Version":  "10.50.1790",
        "KBList":  "2494086"
    },
    {
        "CU":  "CU8",
        "Version":  "10.50.1797",
        "KBList":  "2534352"
    },
    {
        "Version":  "10.50.1804",
        "KBList":  "2567713"
    },
    {
        "CU":  "CU9",
        "Version":  "10.50.1807",
        "KBList":  "2591746"
    },
    {
        "CU":  "CU10",
        "Version":  "10.50.1809",
        "KBList":  "2633145"
    },
    {
        "CU":  "CU11",
        "Version":  "10.50.1810",
        "KBList":  "2659692"
    },
    {
        "CU":  "CU12",
        "Version":  "10.50.1815",
        "KBList":  "2679366"
    },
    {
        "CU":  "CU13",
        "Version":  "10.50.1817",
        "KBList":  "2703280"
    },
    {
        "CU":  "CU14",
        "Version":  "10.50.2425",
        "KBList":  "2463333"
    },
    {
        "SP":  "SP1",
        "Version":  "10.50.2500",
        "SupportedUntil":  "2013-10-08T00:00:00",
        "KBList":  "2528583"
    },
    {
        "Version":  "10.50.2550",
        "KBList":  "27116440"
    },
    {
        "CU":  "CU1",
        "Version":  "10.50.2769",
        "KBList":  "2544793"
    },
    {
        "CU":  "CU2",
        "Version":  "10.50.2772",
        "KBList":  "2567714"
    },
    {
        "Version":  "10.50.2776"
    },
    {
        "CU":  "CU3",
        "Version":  "10.50.2789",
        "KBList":  "2591748"
    },
    {
        "CU":  "CU4",
        "Version":  "10.50.2796",
        "KBList":  "2633146"
    },
    {
        "Version":  "10.50.2799"
    },
    {
        "CU":  "CU5",
        "Version":  "10.50.2806",
        "KBList":  "2659694"
    },
    {
        "Version":  "10.50.2807"
    },
    {
        "CU":  "CU6",
        "Version":  "10.50.2811",
        "KBList":  "2679367"
    },
    {
        "CU":  "CU7",
        "Version":  "10.50.2817",
        "KBList":  "2703282"
    },
    {
        "CU":  "CU8",
        "Version":  "10.50.2822",
        "KBList":  "2723743"
    },
    {
        "Version":  "10.50.2861",
        "KBList":  "2716439"
    },
    {
        "CU":  "CU9",
        "Version":  "10.50.2866",
        "KBList":  "2756574"
    },
    {
        "CU":  "CU10",
        "Version":  "10.50.2868",
        "KBList":  "2783135"
    },
    {
        "CU":  "CU11",
        "Version":  "10.50.2869",
        "KBList":  "2812683"
    },
    {
        "CU":  "CU12",
        "Version":  "10.50.2874",
        "KBList":  "2828727"
    },
    {
        "CU":  "CU13",
        "Version":  "10.50.2876",
        "KBList":  "2855792"
    },
    {
        "Version":  "10.50.2881",
        "KBList":  "2868244"
    },
    {
        "Version":  "10.50.3720",
        "KBList":  "2630455"
    },
    {
        "SP":  "SP2",
        "Version":  "10.50.4000",
        "SupportedUntil":  "2015-10-13T00:00:00",
        "KBList":  "2630458"
    },
    {
        "Version":  "10.50.4033",
        "KBList":  "2977320"
    },
    {
        "Version":  "10.50.4042",
        "KBList":  "3045313"
    },
    {
        "CU":  "CU1",
        "Version":  "10.50.4260",
        "KBList":  "2720425"
    },
    {
        "CU":  "CU2",
        "Version":  "10.50.4263",
        "KBList":  "2740411"
    },
    {
        "CU":  "CU3",
        "Version":  "10.50.4266",
        "KBList":  "2754552"
    },
    {
        "CU":  "CU4",
        "Version":  "10.50.4270",
        "KBList":  "2777358"
    },
    {
        "CU":  "CU5",
        "Version":  "10.50.4276",
        "KBList":  "2797460"
    },
    {
        "Version":  "10.50.4279",
        "KBList":  "2830140"
    },
    {
        "CU":  "CU6",
        "Version":  "10.50.4285",
        "KBList":  "2830140"
    },
    {
        "CU":  "CU7",
        "Version":  "10.50.4286",
        "KBList":  "2844090"
    },
    {
        "CU":  "CU8",
        "Version":  "10.50.4290",
        "KBList":  "2871401"
    },
    {
        "CU":  "CU9",
        "Version":  "10.50.4295",
        "KBList":  "2887606"
    },
    {
        "CU":  "CU10",
        "Version":  "10.50.4297",
        "KBList":  "2908087"
    },
    {
        "CU":  "CU11",
        "Version":  "10.50.4302",
        "KBList":  "2926028"
    },
    {
        "CU":  "CU12",
        "Version":  "10.50.4305",
        "KBList":  "2938478"
    },
    {
        "CU":  "CU13",
        "Version":  "10.50.4319",
        "KBList":  "2967540"
    },
    {
        "Version":  "10.50.4339",
        "KBList":  "3045312"
    },
    {
        "Version":  "10.50.4343",
        "KBList":  "3135244"
    },
    {
        "SP":  [
                   "SP3",
                   "LATEST"
               ],
        "Version":  "10.50.6000",
        "SupportedUntil":  "2019-07-09T00:00:00",
        "KBList":  "2979597"
    },
    {
        "Version":  "10.50.6220",
        "KBList":  "3045316"
    },
    {
        "Version":  "10.50.6525",
        "KBList":  "3033860"
    },
    {
        "Version":  "10.50.6529",
        "KBList":  "3045314"
    },
    {
        "Version":  "10.50.6537",
        "KBList":  "3135244"
    },
    {
        "Version":  "10.50.6542",
        "KBList":  "3146034"
    },
    {
        "Version": "10.50.6560",
        "KBList": "4057113"
    },
    {
        "Version":  "11.0.1103",
        "Name": "2012"
    },
    {
        "Version":  "11.0.1440"
    },
    {
        "Version":  "11.0.1750"
    },
    {
        "Version":  "11.0.1913"
    },
    {
        "SP":  "RTM",
        "Version":  "11.0.2100",
        "SupportedUntil":  "2014-01-14T00:00:00"
    },
    {
        "Version":  "11.0.2214",
        "KBList":  "2685308"
    },
    {
        "Version":  "11.0.2218",
        "KBList":  "2716442"
    },
    {
        "CU":  "CU1",
        "Version":  "11.0.2316",
        "KBList":  "2679368"
    },
    {
        "CU":  "CU2",
        "Version":  "11.0.2325",
        "KBList":  "2703275"
    },
    {
        "CU":  "CU3",
        "Version":  "11.0.2332",
        "KBList":  "2723749"
    },
    {
        "Version":  "11.0.2376",
        "KBList":  "2716441"
    },
    {
        "CU":  "CU4",
        "Version":  "11.0.2383",
        "KBList":  "2758687"
    },
    {
        "CU":  "CU5",
        "Version":  "11.0.2395",
        "KBList":  "2777772"
    },
    {
        "CU":  "CU6",
        "Version":  "11.0.2401",
        "KBList":  "2728897"
    },
    {
        "CU":  "CU7",
        "Version":  "11.0.2405",
        "KBList":  "2823247"
    },
    {
        "CU":  "CU8",
        "Version":  "11.0.2410",
        "KBList":  "2844205"
    },
    {
        "CU":  "CU9",
        "Version":  "11.0.2419",
        "KBList":  "2867319"
    },
    {
        "CU":  "CU10",
        "Version":  "11.0.2420",
        "KBList":  "2891666"
    },
    {
        "CU":  "CU11",
        "Version":  "11.0.2424",
        "KBList":  "2908007"
    },
    {
        "Version":  "11.0.2809"
    },
    {
        "Version":  "11.0.2845"
    },
    {
        "SP":  "SP1",
        "Version":  "11.0.3000",
        "SupportedUntil":  "2015-07-14T00:00:00",
        "KBList":  "2674319"
    },
    {
        "Version":  "11.0.3128",
        "KBList":  "2793634"
    },
    {
        "Version":  "11.0.3153",
        "KBList":  "2977326"
    },
    {
        "Version":  "11.0.3156",
        "KBList":  "3045318"
    },
    {
        "CU":  "CU1",
        "Version":  "11.0.3321",
        "KBList":  "2765331"
    },
    {
        "Version":  "11.0.3335",
        "KBList":  "2800050"
    },
    {
        "CU":  "CU2",
        "Version":  "11.0.3339",
        "KBList":  "2790947"
    },
    {
        "CU":  "CU3",
        "Version":  "11.0.3349",
        "KBList":  "2812412"
    },
    {
        "Version":  "11.0.3350",
        "KBList":  "2832017"
    },
    {
        "CU":  "CU4",
        "Version":  "11.0.3368",
        "KBList":  "2833645"
    },
    {
        "CU":  "CU5",
        "Version":  "11.0.3373",
        "KBList":  "2861107"
    },
    {
        "CU":  "CU6",
        "Version":  "11.0.3381",
        "KBList":  "2874879"
    },
    {
        "CU":  "CU7",
        "Version":  "11.0.3393",
        "KBList":  "2894115"
    },
    {
        "CU":  "CU8",
        "Version":  "11.0.3401",
        "KBList":  "2917531"
    },
    {
        "CU":  "CU9",
        "Version":  "11.0.3412",
        "KBList":  "2931078"
    },
    {
        "CU":  "CU10",
        "Version":  "11.0.3431",
        "KBList":  "2954099"
    },
    {
        "Version":  "11.0.3437",
        "KBList":  "2969896"
    },
    {
        "CU":  "CU11",
        "Version":  "11.0.3449",
        "KBList":  "2975396"
    },
    {
        "CU":  "CU12",
        "Version":  "11.0.3460",
        "KBList":  "2977325"
    },
    {
        "CU":  "CU13",
        "Version":  "11.0.3470",
        "KBList":  "2991533"
    },
    {
        "Version":  "11.0.3482",
        "KBList":  "3002044"
    },
    {
        "CU":  "CU14",
        "Version":  "11.0.3486",
        "KBList":  "3023636"
    },
    {
        "CU":  "CU15",
        "Version":  "11.0.3487",
        "KBList":  "3038001"
    },
    {
        "CU":  "CU16",
        "Version":  "11.0.3492",
        "KBList":  "3052476"
    },
    {
        "Version":  "11.0.3513",
        "KBList":  "3045317"
    },
    {
        "SP":  "SP2",
        "Version":  "11.0.5058",
        "SupportedUntil":  "2017-01-10T00:00:00",
        "KBList":  "2958429"
    },
    {
        "Version":  "11.0.5343",
        "KBList":  "3045321"
    },
    {
        "Version":  "11.0.5352",
        "KBList":  "3135244"
    },
    {
        "Version":  "11.0.5388",
        "KBList":  "3194719"
    },
    {
        "Version":  "11.0.5522",
        "KBList":  "2969896"
    },
    {
        "CU":  "CU1",
        "Version":  "11.0.5532",
        "KBList":  "2976982"
    },
    {
        "CU":  "CU2",
        "Version":  "11.0.5548",
        "KBList":  "2983175"
    },
    {
        "CU":  "CU3",
        "Version":  "11.0.5556",
        "KBList":  "3002049"
    },
    {
        "CU":  "CU4",
        "Version":  "11.0.5569",
        "KBList":  "3007556"
    },
    {
        "Version":  "11.0.5571",
        "KBList":  "3034679"
    },
    {
        "CU":  "CU5",
        "Version":  "11.0.5582",
        "KBList":  "3037255"
    },
    {
        "CU":  "CU6",
        "Version":  "11.0.5592",
        "KBList":  "3052468"
    },
    {
        "Version":  "11.0.5613",
        "KBList":  "3045319"
    },
    {
        "CU":  "CU7",
        "Version":  "11.0.5623",
        "KBList":  "3072100"
    },
    {
        "Version":  "11.0.5629",
        "KBList":  "3087872"
    },
    {
        "CU":  "CU8",
        "Version":  "11.0.5634",
        "KBList":  "3082561"
    },
    {
        "Version":  "11.0.5636",
        "KBList":  "3097636"
    },
    {
        "CU":  "CU9",
        "Version":  "11.0.5641",
        "KBList":  "3098512"
    },
    {
        "CU":  "CU10",
        "Version":  "11.0.5644",
        "KBList":  "3120313"
    },
    {
        "CU":  "CU11",
        "Version":  "11.0.5646",
        "KBList":  "3137745"
    },
    {
        "CU":  "CU12",
        "Version":  "11.0.5649",
        "KBList":  "3152637"
    },
    {
        "CU":  "CU13",
        "Version":  "11.0.5655",
        "KBList":  "3165266"
    },
    {
        "CU":  "CU14",
        "Version":  "11.0.5657",
        "KBList":  "3180914"
    },
    {
        "CU":  "CU15",
        "Version":  "11.0.5676",
        "KBList":  [
                       "3205416",
                       "3194725"
                   ]
    },
    {
        "CU":  "CU16",
        "Version":  "11.0.5678",
        "KBList":  "3205054"
    },
    {
        "SP":  "SP3",
        "Version":  "11.0.6020",
        "SupportedUntil":  "2018-10-09T00:00:00",
        "KBList":  "3072779"
    },
    {
        "Version":  "11.0.6216",
        "KBList":  "3135244"
    },
    {
        "Version":  "11.0.6248",
        "KBList":  "3194721"
    },
    {
       "Version":  "11.0.6251",
       "KBList":  "4019092"
    },
    {
        "Version": "11.0.6260",
        "KBList": "4057115"
    },
    {
        "CU":  "CU1",
        "Version":  "11.0.6518",
        "KBList":  "3123299"
    },
    {
        "CU":  "CU2",
        "Version":  "11.0.6523",
        "KBList":  "3137746"
    },
    {
        "CU":  "CU3",
        "Version":  "11.0.6537",
        "KBList":  "3152635"
    },
    {
        "CU":  "CU4",
        "Version":  "11.0.6540",
        "KBList":  "3165264"
    },
    {
        "CU":  "CU5",
        "Version":  "11.0.6544",
        "KBList":  "3180915"
    },
    {
        "CU":  "CU6",
        "Version":  "11.0.6567",
        "KBList":  [
                       "3194992",
                       "3194724"
                   ]
    },
    {
        "CU":  "CU7",
        "Version":  "11.0.6579",
        "KBList":  "3205051"
    },
    {
        "CU":  "CU8",
        "Version":  "11.0.6594",
        "KBList":  "4013104"
    },
    {
        "CU":  "CU9",
        "Version":  "11.0.6598",
        "KBList":  "4016762"
    },
    {
        "CU":  "CU10",
        "Version":  "11.0.6607",
        "KBList":  [
                       "4025925",
                       "4019090"
                   ]
    },
    {
        "Version":  "11.0.6615",
        "KBList":  "4057121"
    },
    {
        "SP":  [
                   "SP4",
                   "LATEST"
               ],
        "SupportedUntil":  "2022-07-12T00:00:00",
        "Version":  "11.0.7001",
        "KBList":  "4018073"
    },
    {
        "Version": "11.0.7462",
        "KBList": "4057116"
    },
    {
        "Version": "11.0.7469",
        "KBList": "4091266"
    },
    {
        "Version":  "12.0.1524",
        "Name": "2014"
    },
    {
        "SP":  "RTM",
        "Version":  "12.0.2000",
        "SupportedUntil":  "2016-07-12T00:00:00"
    },
    {
        "Version":  "12.0.2254",
        "KBList":  "2977315"
    },
    {
        "Version":  "12.0.2269",
        "KBList":  "3045324"
    },
    {
        "Version":  "12.0.2271"
    },
    {
        "CU":  "CU1",
        "Version":  "12.0.2342",
        "KBList":  "2931693"
    },
    {
        "CU":  "CU2",
        "Version":  "12.0.2370",
        "KBList":  "2967546"
    },
    {
        "Version":  "12.0.2381",
        "KBList":  "2977316"
    },
    {
        "CU":  "CU3",
        "Version":  "12.0.2402",
        "KBList":  "2984923"
    },
    {
        "Version":  "12.0.2405",
        "KBList":  "2999809"
    },
    {
        "Version":  "12.0.2423",
        "KBList":  "3007050"
    },
    {
        "CU":  "CU4",
        "Version":  "12.0.2430",
        "KBList":  "2999197"
    },
    {
        "Version":  "12.0.2436",
        "KBList":  "3014867"
    },
    {
        "CU":  "CU5",
        "Version":  "12.0.2456",
        "KBList":  "3011055"
    },
    {
        "Version":  "12.0.2464",
        "KBList":  "3024815"
    },
    {
        "Version":  "12.0.2472",
        "KBList":  "3032087"
    },
    {
        "Version":  "12.0.2474",
        "KBList":  "3034679"
    },
    {
        "CU":  "CU6",
        "Version":  "12.0.2480",
        "KBList":  "3031047"
    },
    {
        "Version":  "12.0.2485",
        "KBList":  "3043788"
    },
    {
        "Version":  "12.0.2488",
        "KBList":  "3048751"
    },
    {
        "CU":  "CU7",
        "Version":  "12.0.2495",
        "KBList":  "3046038"
    },
    {
        "Version":  "12.0.2504",
        "KBList":  [
                       "3058512",
                       "2999809"
                   ]
    },
    {
        "Version":  "12.0.2505",
        "KBList":  "3052167"
    },
    {
        "Version":  "12.0.2506",
        "KBList":  "3063054"
    },
    {
        "CU":  "CU8",
        "Version":  "12.0.2546",
        "KBList":  "3067836"
    },
    {
        "Version":  "12.0.2548",
        "KBList":  "3045323"
    },
    {
        "CU":  "CU9",
        "Version":  "12.0.2553",
        "KBList":  "3075949"
    },
    {
        "CU":  "CU10",
        "Version":  "12.0.2556",
        "KBList":  "3094220"
    },
    {
        "CU":  "CU11",
        "Version":  "12.0.2560",
        "KBList":  "3106659"
    },
    {
        "CU":  "CU12",
        "Version":  "12.0.2564",
        "KBList":  "3130923"
    },
    {
        "CU":  "CU13",
        "Version":  "12.0.2568",
        "KBList":  "3144517"
    },
    {
        "CU":  "CU14",
        "Version":  "12.0.2569",
        "KBList":  "3158271"
    },
    {
        "SP":  "SP1",
        "Version":  "12.0.4100",
        "SupportedUntil":  "2017-10-10T00:00:00",
        "KBList":  "3058865"
    },
    {
        "Version":  "12.0.4213",
        "KBList":  "3070446"
    },
    {
        "Version":  "12.0.4219"
    },
    {
        "Version":  "12.0.4232",
        "KBList":  "3194720"
    },
    {
        "Version":  "12.0.4237",
        "KBList":  "4019091"
    },
    {
        "CU":  "CU1",
        "Version":  "12.0.4416",
        "KBList":  "3067839"
    },
    {
        "Version":  "12.0.4419",
        "KBList":  "3078973"
    },
    {
        "CU":  "CU2",
        "Version":  "12.0.4422",
        "KBList":  "3075950"
    },
    {
        "CU":  "CU3",
        "Version":  "12.0.4427",
        "KBList":  "3094221"
    },
    {
        "Version":  "12.0.4432",
        "KBList":  [
                       "3097972",
                       "319472"
                   ]
    },
    {
        "Version":  "12.0.4433",
        "KBList":  "3119148"
    },
    {
        "CU":  "CU4",
        "Version":  "12.0.4436",
        "KBList":  "3106660"
    },
    {
        "Version":  "12.0.4437",
        "KBList":  "3130999"
    },
    {
        "CU":  "CU5",
        "Version":  "12.0.4439",
        "KBList":  "3130926"
    },
    {
        "Version":  "12.0.4449",
        "KBList":  "3144524"
    },
    {
        "CU":  "CU6",
        "Version":  "12.0.4457",
        "KBList":  "3167392"
    },
    {
        "CU":  "CU7",
        "Version":  "12.0.4459",
        "KBList":  "3162659"
    },
    {
        "Version":  "12.0.4463",
        "KBList":  "3174370"
    },
    {
        "CU":  "CU8",
        "Version":  "12.0.4468",
        "KBList":  "917606"
    },
    {
        "CU":  "CU9",
        "Version":  "12.0.4474",
        "KBList":  "3186964"
    },
    {
        "Version":  "12.0.4487",
        "KBList":  "3194722"
    },
    {
        "CU":  "CU10",
        "Version":  "12.0.4491",
        "KBList":  "3204399"
    },
    {
        "Version":  "12.0.4502",
        "CU":  "CU11",
        "KBList":  "4010392"
    },
    {
        "Version":  "12.0.4511",
        "CU":  "CU12",
        "KBList":  "4017793"
    },
    {
        "Version":  "12.0.4522",
        "CU":  "CU13",
        "KBList":  [
                       "4019099",
                       "4032542"
                   ]
    },
    {
        "SP":  "SP2",
        "Version":  "12.0.5000",
        "SupportedUntil":  "2024-07-09T00:00:00",
        "KBList":  "3171021"
    },
    {
        "Version":  "12.0.5203",
        "KBList":  "3194714"
    },
    {
        "Version": "12.0.5207",
        "KBList": "4019093"
    },
    {
        "Version": "12.0.5214",
        "KBList": "4057120"
    },
    {
        "CU":  "CU1",
        "Version":  "12.0.5511",
        "KBList":  "3178925"
    },
    {
        "CU":  "CU2",
        "Version":  "12.0.5522",
        "KBList":  "3188778"
    },
    {
        "Version":  "12.0.5532",
        "KBList":  "3194718"
    },
    {
        "CU":  "CU3",
        "Version":  "12.0.5538",
        "KBList":  "3204388"
    },
    {
        "CU":  "CU4",
        "Version":  "12.0.5540",
        "KBList":  "4010394"
    },
    {
        "CU":  "CU5",
        "Version":  "12.0.5546",
        "KBList":  "4013098"
    },
    {
        "Version":  "12.0.5553",
        "CU":  "CU6",
        "KBList":  [
                       "4019094",
                       "4036996"
                   ]
    },
    {
        "CU":  "CU7",
        "Version":  "12.0.5556",
        "KBList":  "4032541"
    },
    {
        "CU":  "CU8",
        "Version":  "12.0.5557",
        "KBList":  "4037356"
    },
    {
        "CU": "CU9",
        "Version": "12.0.5563",
        "KBList": "4055557"
    },
    {
        "CU": "CU10",
        "Version": "12.0.5571",
        "KBList": "4052725"
    },
    {
        "CU": "CU11",
        "Version": "12.0.5579",
        "KBList": "4077063"
    },
    {
        "CU": "CU12",
        "Version": "12.0.5589",
        "KBList": "4130489"
    },
    {
        "CU": "CU13",
        "Version": "12.0.5590",
        "KBList": "4456287"
    },
    {
        "CU": "CU14",
        "Version": "12.0.5600",
        "KBList": "4459860"
    },
    {
        "SP": [
            "SP3",
            "LATEST"
        ],
        "Version": "12.0.6024",
        "SupportedUntil": "2019-09-07T00:00:00",
        "KBList": "4022619"
    },
    {
        "Version":  "13.0.200",
        "Name": "2016"
    },
    {
        "Version":  "13.0.300"
    },
    {
        "Version":  "13.0.407"
    },
    {
        "Version":  "13.0.500"
    },
    {
        "Version":  "13.0.600"
    },
    {
        "Version":  "13.0.700"
    },
    {
        "Version":  "13.0.800"
    },
    {
        "Version":  "13.0.900"
    },
    {
        "Version":  "13.0.1000"
    },
    {
        "Version":  "13.0.1100"
    },
    {
        "Version":  "13.0.1200"
    },
    {
        "Version":  "13.0.1250"
    },
    {
        "Version":  "13.0.1300"
    },
    {
        "Version":  "13.0.1400"
    },
    {
        "SP":  "RTM",
        "Version":  "13.0.1601",
        "SupportedUntil":  "2018-01-09T00:00:00"
    },
    {
        "Version":  "13.0.1708",
        "KBList":  "3164398"
    },
    {
        "Version":  "13.0.1722",
        "KBList":  "3194716"
    },
    {
        "Version":  "13.0.1728",
        "KBList":  "3210111"
    },
    {
        "Version":  "13.0.1742",
        "KBList":  "4019088"
    },
    {
        "Version": "13.0.1745",
        "KBList": "4058560"
    },
    {
        "CU":  "CU1",
        "Version":  "13.0.2149",
        "KBList":  "3164674"
    },
    {
        "CU":  "CU2",
        "Version":  "13.0.2164",
        "KBList":  "3182270"
    },
    {
        "Version":  "13.0.2169",
        "KBList":  "3195813"
    },
    {
        "Version":  "13.0.2170",
        "KBList":  "3199171"
    },
    {
        "CU":  "CU3",
        "Version":  "13.0.2186",
        "KBList":  [
                       "3205413",
                       "3194717"
                   ]
    },
    {
        "Version":  "13.0.2190",
        "KBList":  "3210110"
    },
    {
        "CU":  "CU4",
        "Version":  "13.0.2193",
        "KBList":  "3205052"
    },
    {
        "CU":  "CU5",
        "Version":  "13.0.2197",
        "KBList":  "4013105"
    },
    {
        "CU":  "CU6",
        "Version":  "13.0.2204",
        "KBList":  "4019914"
    },
    {
        "Version":  "13.0.2210",
        "CU":  "CU7",
        "KBList":  [
                       "4024304",
                       "4019086"
                   ]
    },
    {
        "CU":  "CU8",
        "Version":  "13.0.2213",
        "KBList":  "4040713"
    },
    {
        "CU": "CU9",
        "Version": "13.0.2216",
        "KBList": "4037357"
    },
    {
        "Version": "13.0.2218",
        "KBList": "4058559"
    },
    {
        "SP":  "SP1",
        "Version":  "13.0.4001",
        "SupportedUntil":  "2019-09-07T00:00:00",
        "KBList":  "3182545"
    },
    {
        "Version":  "13.0.4199",
        "KBList":  "3207512"
    },
    {
        "Version":  "13.0.4202",
        "KBList":  "3210089"
    },
    {
        "Version": "13.0.4206",
        "KBList": "4019089"
    },
    {
        "Version": "13.0.4210",
        "KBList": "4057118"
    },
    {
        "Version": "13.0.4224",
        "KBList": "4458842"
    },
    {
        "CU":  "CU1",
        "Version":  "13.0.4411",
        "KBList":  "3208177"
    },
    {
        "CU":  "CU2",
        "Version":  "13.0.4422",
        "KBList":  "4013106"
    },
    {
        "CU":  "CU3",
        "Version":  "13.0.4435",
        "KBList":  "4019916"
    },
    {
        "Version":  "13.0.4446",
        "CU":  "CU4",
        "KBList":  [
                       "4024305",
                       "4019095"
                   ]
    },
    {
        "CU":  "CU5",
        "Version":  "13.0.4451",
        "KBList":  "4040714"
    },
    {
        "CU": "CU6",
        "Version": "13.0.4457",
        "KBList": "4037354"
    },
    {
        "CU": "CU7",
        "Version": "13.0.4466",
        "KBList": "4057119"
    },
    {
        "CU": "CU8",
        "Version": "13.0.4474",
        "KBList": "4077064"
    },
    {
        "CU": "CU9",
        "Version": "13.0.4502",
        "KBList": "4100997"
    },
    {
        "CU": "CU10",
        "Version": "13.0.4514",
        "KBList": "4341569"
    },
    {
        "Version": "13.0.4522",
        "KBList": "4293808"
    },
    {
        "CU": "CU11",
        "Version": "13.0.4528",
        "KBList": "4459676"
    },
    {
        "CU": "CU12",
        "Version": "13.0.4541",
        "KBList": "4464343"
    },
    {
        "SP": [
            "SP2",
            "LATEST"
        ],
        "Version": "13.0.5026",
        "SupportedUntil": "2026-07-14T00:00:00",
        "KBList": "4052908"
    },
    {
        "Version": "13.0.5081",
        "KBList": "4293802"
    },
    {
        "CU": "CU1",
        "Version": "13.0.5149",
        "KBList": "4135048"
    },
    {
        "CU": "CU2",
        "Version": "13.0.5153",
        "KBList": "4340355"
    },
    {
        "Version": "13.0.5161",
        "KBList": "4293807"
    },
    {
        "Version": "13.0.5201",
        "KBList": "4458621"
    },
    {
        "CU": "CU3",
        "Version": "13.0.5216",
        "KBList": "4458871"
    },
    {
        "CU": "CU4",
        "Version": "13.0.5233",
        "KBList": "4464106"
    },
    {
        "Version":  "14.0.1",
        "Name": "2017"
    },
    {
        "Version":  "14.0.100"
    },
    {
        "Version":  "14.0.200"
    },
    {
        "Version":  "14.0.304"
    },
    {
        "Version":  "14.0.405"
    },
    {
        "Version":  "14.0.500"
    },
    {
        "Version":  "14.0.600"
    },
    {
        "Version":  "14.0.800"
    },
    {
        "Version":  "14.0.900"
    },
    {
        "SP":  [
                   "RTM",
                   "LATEST"
               ],
        "Version":  "14.0.1000",
        "SupportedUntil":  "2027-10-12T00:00:00"
    },
    {
        "Version": "14.0.2000",
        "KBList": "4057122"
    },
    {
        "Version": "14.0.2002",
        "KBList": "4293803"
    },
    {
        "CU":  "CU1",
        "Version":  "14.0.3006",
        "KBList":  "4038634"
    },
    {
        "CU": "CU2",
        "Version": "14.0.3008",
        "KBList": "4052574"
    },
    {
        "CU": "CU3",
        "Version": "14.0.3015",
        "KBList": "4052987"
    },
    {
        "CU": "CU4",
        "Version": "14.0.3022",
        "KBList": "4056498"
    },
    {
        "CU": "CU5",
        "Version": "14.0.3023",
        "KBList": "4092643"
    },
    {
        "CU": "CU6",
        "Version": "14.0.3025",
        "KBList": "4101464"
    },
    {
        "CU": "CU7",
        "Version": "14.0.3026",
        "KBList": "4229789"
    },
    {
        "CU": "CU8",
        "Version": "14.0.3029",
        "KBList": "4338363"
    },
    {
        "CU": "CU9",
        "Version": "14.0.3030",
        "KBList": "4341265"
    },
    {
        "Version": "14.0.3035",
        "KBList": "4293805"
    },
    {
        "CU": "CU10",
        "Version": "14.0.3037",
        "KBList": "4293805"
    },
    {
        "CU": "CU11",
        "Version": "14.0.3038",
        "KBList": "4462262"
    },
    {
        "CU": "CU12",
        "Version": "14.0.3045",
        "KBList": "4464082"
    }
    ]
}

tools\dbatools\bin\XEtemplates\Connection Detail Tracking.xml

<event_sessions xmlns="http://schemas.microsoft.com/sqlserver/2008/07/extendedeventconfig">
  <event_session name="Connection Detail Tracking" maxMemory="4" eventRetentionMode="allowSingleEventLoss" trackCausality="true" dispatchLatency="30" maxEventSize="0" memoryPartitionMode="none">
    <templateCategory>
      <!-- _locID_text="templateCategory" _locComment = "" -->System Monitoring</templateCategory>
    <templateName>
      <!-- _locID_text = "templateName" _locComment = "" -->Connection Detail Tracking</templateName>
    <templateDescription>
      <!-- _locID_text = "templateDescription" _locComment = "" -->Tracks connection activity for a server. Normal connection activity is tracked using the login and logout events, and problems are recorded using the connectivity_ring_buffer_recorded event.</templateDescription>
    <event package="sqlserver" name="connectivity_ring_buffer_recorded">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_connection_id" />
      <action package="sqlserver" name="client_hostname" />
      <action package="sqlserver" name="context_info" />
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="session_id" />
    </event>
    <event package="sqlserver" name="login">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_connection_id" />
      <action package="sqlserver" name="client_hostname" />
      <action package="sqlserver" name="context_info" />
      <action package="sqlserver" name="server_instance_name" />
      <action package="sqlserver" name="server_principal_name" />
      <parameter name="collect_options_text" value="1" />
    </event>
    <event package="sqlserver" name="logout">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_connection_id" />
      <action package="sqlserver" name="client_hostname" />
      <action package="sqlserver" name="context_info" />
      <action package="sqlserver" name="server_instance_name" />
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="session_id" />
    </event>
    <target package="package0" name="ring_buffer" />
  </event_session>
</event_sessions>

tools\dbatools\bin\csv\LumenWorks.Framework.IO.dll

md5: C76D91D1714B0A395844F80FCC28514E | sha1: 7E6241585218C1578FBCD31233B57B55DEF3877A | sha256: 8B86914D50465C35119F85AAAF9364316E9F98B2C2BE80CA2CA6E4D862E68782 | sha512: C7C77C66CF09EDF58D13952F007599E3F73DD3B223340427277FDDE8277EA088F449A31B18DD2A2B4239E87A99277EEC2ADC2E7794BA4236AD127CA346FE9C2B

tools\dbatools\bin\build-project.ps1

[CmdletBinding()]
param (
    [string]$ProjectPath = (Resolve-Path -Path (Join-Path -Path $PSModuleRoot -ChildPath 'bin\projects\dbatools\dbatools.sln')),
    [ValidateSet('ps3', 'ps4', 'Release', 'Debug')]
    [string]$MsbuildConfiguration = "Release",
    [string]$MsbuildOptions = "",
    [Parameter(HelpMessage = 'Target to run instead of build')]
    [string]$MsbuildTarget = 'Build'
)

if (-not $PSBoundParameters.ContainsKey('MsbuildConfiguration')) {
    $_MsbuildConfiguration = switch ($PSVersionTable.PSVersion.Major) {
        3 {
            "ps3"
        }
        4 {
            "ps4"
        }
        default {
            "Release"
        }
    }
} else {
    $_MsbuildConfiguration = $MsbuildConfiguration
}

function Get-MsBuildPath {
    [CmdletBinding()]
    [OutputType([string])]
    param ()
    process {
        $rawPath = "$(Split-Path ([string].Assembly.Location))\msbuild.exe"
        (Resolve-Path $rawPath).Path
    }
}

$start = Get-Date
$msbuild = Get-MsBuildPath

if (-not (Test-Path $msbuild)) {
    throw "msbuild not found, cannot compile library! Check your .NET installation health, then try again. Path checked: $msbuild"
}

if ($env:APPVEYOR -eq 'True') {
    $MsbuildOptions = $MsbuildOptions + '/logger:"C:\Program Files\AppVeyor\BuildAgent\Appveyor.MSBuildLogger.dll" '
    $_MsbuildConfiguration = 'Debug'
    
    if (-not (Test-Path "C:\Program Files\AppVeyor\BuildAgent\Appveyor.MSBuildLogger.dll")) {
        throw "msbuild logger not found, cannot compile library! Check your .NET installation health, then try again. Path checked: $msbuild"
    }
}

#$MsbuildOptions = $MsbuildOptions + '/logger:BinaryLogger,"{0}";"{1}" ' -f (Join-Path $PSScriptRoot 'StructuredLogger.dll'), (Resolve-Path '..\msbuild.bin.log').Path

if (-not (Test-Path $ProjectPath)) {
    throw new-object 'System.IO.FileNotFoundException' 'Could not file project or solution', $ProjectPath
}

Write-Verbose -Message "Building the library with command $msbuild $ProjectPath /p:Configuration=$_MsbuildConfiguration $MsbuildOptions /t:$MsBuildTarget"
& $msbuild $ProjectPath "/p:Configuration=$_MsbuildConfiguration" $MsbuildOptions "/t:$MsBuildTarget"

if ($MsbuildTarget -eq 'Build') {
    try {
        Write-Verbose -Message "Found library, trying to copy & import"
        if ($script:alwaysBuildLibrary) {
            Move-Item -Path (Resolve-Path -Path "$PSModuleRoot\bin\dbatools.dll") -Destination $script:DllRoot -Force -ErrorAction Stop
        } else {
            Copy-Item -Path (Resolve-Path -Path "$PSModuleRoot\bin\dbatools.dll") -Destination $script:DllRoot -Force -ErrorAction Stop
        }
        Add-Type -Path (Resolve-Path -Path "$PSModuleRoot\dbatools.dll") -ErrorAction Stop
    } catch {
        Write-Verbose -Message "Failed to copy & import, attempting to import straight from the module directory"
        Add-Type -Path (Resolve-Path -Path "$PSModuleRoot\bin\dbatools.dll") -ErrorAction Stop
    }
    Write-Verbose -Message "Total duration: $((Get-Date) - $start)"
}

tools\dbatools\bin\bcp\Resources\1033\bcp.rll

tools\dbatools\bin\bcp\bcp.exe

md5: 0056F153E8574FD9C429946E4983E962 | sha1: 41E89575060091A52A52EAA1656B93D7DF67EA01 | sha256: D59D296E846CBD83F5E55CB5852CC2AAA9E1DECC8E0A324B7D0964C4CDF7B425 | sha512: 61F6608BA778FB3B5D1FC02F3F8EB2A006E5378ED629A70F095A62F116A4E4FA0C34B3033D618BF371E7EAB0EAC9FAD27E2AD586C7EF527BAAF72558F12BCD43

tools\dbatools\allcommands.zip

md5: A2AD4C96818D67DD88AA6F0A0715D9BC | sha1: 54EEDEDD699236D19CAFD31DF0A8D0BAD7EDBF70 | sha256: B1C93FEBD243B2590B9CD55D81F3CC3E54987F4B308FF184FC75F2D584F2AC26 | sha512: F99C362AEC71B468F25C4B35D59C6B5BB61C31B4AA5C23ED013EA75F8F490F9B0FA91E726962DBF8CD90AC28A4363B88E92421616536AFBBAEFAA3DA81D7076A

tools\chocolateyUninstall.ps1

$ErrorActionPreference = 'Stop'

$moduleName = 'dbatools'
$sourcePath = Join-Path -Path $env:ProgramFiles -ChildPath "WindowsPowerShell\Modules\$moduleName"

Write-Verbose "Removing all version of '$moduleName' from '$sourcePath'."
Remove-Item -Path $sourcePath -Recurse -Force -ErrorAction SilentlyContinue

if ($PSVersionTable.PSVersion.Major -lt 4) {
    $modulePaths = [Environment]::GetEnvironmentVariable('PSModulePath', 'Machine') -split ';'

    Write-Verbose "Removing '$sourcePath' from PSModulePath."
    $newModulePath = $modulePaths | Where-Object { $_ -ne $sourcePath }

    [Environment]::SetEnvironmentVariable('PSModulePath', $newModulePath, 'Machine')
    $env:PSModulePath = $newModulePath
}

tools\chocolateyInstall.ps1

$ErrorActionPreference = 'Stop'

$toolsDir   = "$(Split-Path -parent $MyInvocation.MyCommand.Definition)"
$moduleName = 'dbatools'  # this may be different from the package name and different case

if ($PSVersionTable.PSVersion.Major -lt 3) {
    throw "$moduleName) module requires a minimum of PowerShell v3."
}

# module may already be installed outside of Chocolatey
Remove-Module -Name $moduleName -Force -ErrorAction SilentlyContinue

$sourcePath = Join-Path -Path $toolsDir -ChildPath "$modulename\*"
$destPath   = Join-Path -Path $env:ProgramFiles -ChildPath "WindowsPowerShell\Modules\$moduleName"

if ($PSVersionTable.PSVersion.Major -ge 5)
{
    $manifestFile = Join-Path -Path $toolsDir -ChildPath "$moduleName\$moduleName.psd1"
    $manifest     = Test-ModuleManifest -Path $manifestFile -WarningAction Ignore -ErrorAction Stop
    $destPath     = Join-Path -Path $destPath -ChildPath $manifest.Version.ToString()
}

Write-Verbose "Creating destination directory '$destPath' for module."
New-Item -Path $destPath -ItemType Directory -Force -ErrorAction SilentlyContinue | Out-Null

Write-Verbose "Moving '$moduleName' files from '$sourcePath' to '$destPath'."
Move-Item -Path $sourcePath -Destination $destPath -Force

if ($PSVersionTable.PSVersion.Major -lt 4)
{
    $modulePaths = [Environment]::GetEnvironmentVariable('PSModulePath', 'Machine') -split ';'
    if ($modulePaths -notcontains $destPath)
    {
        Write-Verbose "Adding '$destPath' to PSModulePath."
        $newModulePath = @($destPath, $modulePaths) -join ';'

        [Environment]::SetEnvironmentVariable('PSModulePath', $newModulePath, 'Machine')
        $env:PSModulePath = $newModulePath
    }
}

tools\dbatools\bin\sqlcmd\Resources\1033\license_SQLCMD.txt

MICROSOFT PRE-RELEASE SOFTWARE LICENSE TERMS
MICROSOFT SQL SERVER VNEXT COMMUNITY TECHNOLOGY PREVIEW 1 (CTP1)
These license terms are an agreement between Microsoft Corporation (or based on where you live, one of its affiliates) and you. Please read them. They apply to the pre-release software named above, which includes the media on which you received it, if any. The terms also apply to any Microsoft
•	updates,
•	supplements,
•	Internet-based services, and 
•	support services
for this software, unless other terms accompany those items. If so, those terms apply.
BY USING THE SOFTWARE, YOU ACCEPT THESE TERMS.  YOU MAY CHOOSE NOT TO ACCEPT THESE TERMS, IN WHICH CASE YOU MAY NOT USE THE SOFTWARE (IF YOU HAVE NOT ALREADY INSTALLED IT) OR WITHDRAW YOUR ACCEPTANCE ANY TIME BY UNINSTALLING THE SOFTWARE. 
We collect data about how you interact with this software. This includes data about the performance of the services, any problems you experience with them, and the features you use. This also includes data about your device and the network you use to connect to our services, including IP address, device identifiers, regional and language settings. It includes information about the operating systems and other software installed on your device, including product keys. By using this software, you consent to Microsoft’s collection of usage and performance data related to your use of the software.

If you comply with these license terms, you have the rights below.
1.	INSTALLATION AND USE RIGHTS. 
a.	Installation and Use.
•	You may install any number of copies of the software on your premises solely to internally evaluate it and provide feedback to Microsoft. 
•	You may not test the software in a live operating environment unless Microsoft permits you to do so under another agreement.
b.	Third Party Programs.  
The software may include third party components with separate legal notices or governed by other agreements, as may be described in the ThirdPartyNotices file accompanying the software.  Even if such components are governed by other agreements, the disclaimers and the limitations on and exclusions of damages below also apply.
2.	TERM. The term of this agreement is until 6/30/2017.
3.	PRE-RELEASE SOFTWARE. This software is a pre-release version. It may not work the way a final version of the software will. We may change it for the final, commercial version. We also may not release a commercial version.
4.	FEEDBACK. If you give feedback about the software to Microsoft, you give to Microsoft, without charge, the right to use, share and commercialize your feedback in any way and for any purpose. You also give to third parties, without charge, any patent rights needed for their products, technologies and services to use or interface with any specific parts of a Microsoft software or service that includes the feedback. You will not give feedback that is subject to a license that requires Microsoft to license its software or documentation to third parties because we include your feedback in them. These rights survive this agreement.
5.	SCOPE OF LICENSE. The software is licensed, not sold. This agreement only gives you some rights to use the software. Microsoft reserves all other rights. Unless applicable law gives you more rights despite this limitation, you may use the software only as expressly permitted in this agreement. In doing so, you must comply with any technical limitations in the software that only allow you to use it in certain ways. You may not
•	disclose the results of any benchmark tests of the software to any third party without Microsoft’s prior written approval;
•	work around any technical limitations in the software;
•	reverse engineer, decompile or disassemble the software, except and only to the extent that applicable law expressly permits, despite this limitation;
•	make more copies of the software than specified in this agreement or allowed by applicable law, despite this limitation;
•	publish the software for others to copy;
•	rent, lease or lend the software;
•	transfer the software or this agreement to any third party; or
•	use the software for commercial software hosting services.
6.	EXPORT RESTRICTIONS. The software is subject to United States export laws and regulations. You must comply with all domestic and international export laws and regulations that apply to the software. These laws include restrictions on destinations, end users and end use. For additional information, see www.microsoft.com/exporting. 
7.	SUPPORT SERVICES. Because this software is “as is,” we may not provide support services for it.
8.	ENTIRE AGREEMENT. This agreement, and the terms for supplements, updates, Internet-based services and support services that you use, are the entire agreement for the software and support services.
9.	APPLICABLE LAW.
a.	United States. If you acquired the software in the United States, Washington state law governs the interpretation of this agreement and applies to claims for breach of it, regardless of conflict of laws principles. The laws of the state where you live govern all other claims, including claims under state consumer protection laws, unfair competition laws, and in tort.
b.	Outside the United States. If you acquired the software in any other country, the laws of that country apply.
10.	LEGAL EFFECT. This agreement describes certain legal rights. You may have other rights under the laws of your country. You may also have rights with respect to the party from whom you acquired the software. This agreement does not change your rights under the laws of your country if the laws of your country do not permit it to do so.
11.	DISCLAIMER OF WARRANTY. THE SOFTWARE IS LICENSED “AS-IS.” YOU BEAR THE RISK OF USING IT. MICROSOFT GIVES NO EXPRESS WARRANTIES, GUARANTEES OR CONDITIONS. YOU MAY HAVE ADDITIONAL CONSUMER RIGHTS OR STATUTORY GUARANTEES UNDER YOUR LOCAL LAWS WHICH THIS AGREEMENT CANNOT CHANGE. TO THE EXTENT PERMITTED UNDER YOUR LOCAL LAWS, MICROSOFT EXCLUDES THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
FOR AUSTRALIA – YOU HAVE STATUTORY GUARANTEES UNDER THE AUSTRALIAN CONSUMER LAW AND NOTHING IN THESE TERMS IS INTENDED TO AFFECT THOSE RIGHTS.
12.	LIMITATION ON AND EXCLUSION OF REMEDIES AND DAMAGES. YOU CAN RECOVER FROM MICROSOFT AND ITS SUPPLIERS ONLY DIRECT DAMAGES UP TO U.S. $5.00. YOU CANNOT RECOVER ANY OTHER DAMAGES, INCLUDING CONSEQUENTIAL, LOST PROFITS, SPECIAL, INDIRECT OR INCIDENTAL DAMAGES.
This limitation applies to
•	anything related to the software, services, content (including code) on third party Internet sites, or third party programs; and
•	claims for breach of contract, breach of warranty, guarantee or condition, strict liability, negligence, or other tort to the extent permitted by applicable law.
It also applies even if Microsoft knew or should have known about the possibility of the damages. The above limitation or exclusion may not apply to you because your country may not allow the exclusion or limitation of incidental, consequential or other damages.
Please note: As this software is distributed in Quebec, Canada, these license terms are provided below in French.
Remarque : Ce logiciel étant distribué au Québec, Canada, certaines des clauses dans ce contrat sont fournies ci-dessous en français.
EXCLUSIONS DE GARANTIE. Le logiciel est concédé sous licence « en l’état ». Vous assumez tous les risques liés à son utilisation. Microsoft n’accorde aucune garantie ou condition expresse. Vous pouvez bénéficier de droits des consommateurs supplémentaires dans le cadre du droit local, que ce contrat ne peut modifier. Lorsque cela est autorisé par le droit local, Microsoft exclut les garanties implicites de qualité, d’adéquation à un usage particulier et d’absence de contrefaçon.

LIMITATION ET EXCLUSION DE RECOURS ET DE DOMMAGES. Vous pouvez obtenir de Microsoft et de ses fournisseurs une indemnisation en cas de dommages directs limitée uniquement à hauteur de 5,00 $ US. Vous ne pouvez prétendre à aucune indemnisation pour les autres dommages, y compris les dommages spéciaux, indirects ou accessoires et pertes de bénéfices.
Cette limitation concerne :
•	toute affaire liée au logiciel, aux services ou au contenu (y compris le code) figurant sur des sites Internet tiers ou dans des programmes tiers et
•	les réclamations au titre de violation de contrat ou de garantie, ou au titre de responsabilité stricte, de négligence ou d’une autre faute dans la limite autorisée par la loi en vigueur.
Elle s’applique également même si Microsoft connaissait l'éventualité d'un tel dommage. La limitation ou exclusion ci-dessus peut également ne pas vous être applicable, car votre pays n’autorise pas l’exclusion ou la limitation de responsabilité pour les dommages indirects, accessoires ou de quelque nature que ce soit.

EFFET JURIDIQUE. Le présent contrat décrit certains droits juridiques. Vous pourriez avoir d’autres droits prévus par les lois de votre pays. Le présent contrat ne modifie pas les droits que vous confèrent les lois de votre pays si celles-ci ne le permettent pas.

tools\dbatools\bin\type-extensions.ps1

# Only update on first import
if (-not ([Sqlcollaborative.Dbatools.dbaSystem.SystemHost]::ModuleImported)) {
    # Implement query accelerator for the server object
    Update-TypeData -TypeName Microsoft.SqlServer.Management.Smo.Server -MemberName Query -MemberType ScriptMethod -Value {
        param (
            $Query,

            $Database = "master",

            $AllTables = $false
        )

        if ($AllTables) { ($this.Databases[$Database].ExecuteWithResults($Query)).Tables }
        else { ($this.Databases[$Database].ExecuteWithResults($Query)).Tables[0] }
    } -ErrorAction Ignore

    Update-TypeData -TypeName Microsoft.SqlServer.Management.Smo.Server -MemberName Invoke -MemberType ScriptMethod -Value {
        param (
            $Command,

            $Database = "master"
        )

        $this.Databases[$Database].ExecuteNonQuery($Command)
    } -ErrorAction Ignore

    Update-TypeData -TypeName Microsoft.SqlServer.Management.Smo.Database -MemberName Query -MemberType ScriptMethod -Value {
        param (
            $Query,

            $AllTables = $false
        )

        if ($AllTables) { ($this.ExecuteWithResults($Query)).Tables }
        else { ($this.ExecuteWithResults($Query)).Tables[0] }
    } -ErrorAction Ignore

    Update-TypeData -TypeName Microsoft.SqlServer.Management.Smo.Database -MemberName Invoke -MemberType ScriptMethod -Value {
        param (
            $Command
        )

        $this.ExecuteNonQuery($Command)
    } -ErrorAction Ignore
}

tools\dbatools\bin\typealiases.ps1

# Obtain a reference to the TypeAccelerators type
$TAType = [psobject].Assembly.GetType("System.Management.Automation.TypeAccelerators")

# Define our type aliases
$TypeAliasTable = @{
    DbaInstance              = "Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter"
    DbaCmConnectionParameter = "Sqlcollaborative.Dbatools.Parameter.DbaCmConnectionParameter"
    DbaInstanceParameter     = "Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter"
    dbargx                   = "Sqlcollaborative.Dbatools.Utility.RegexHelper"
    dbatime                  = "Sqlcollaborative.Dbatools.Utility.DbaTime"
    dbadatetime              = "Sqlcollaborative.Dbatools.Utility.DbaDateTime"
    dbadate                  = "Sqlcollaborative.Dbatools.Utility.DbaDate"
    dbatimespan              = "Sqlcollaborative.Dbatools.Utility.DbaTimeSpan"
    prettytimespan           = "Sqlcollaborative.Dbatools.Utility.DbaTimeSpanPretty"
    dbasize                  = "Sqlcollaborative.Dbatools.Utility.Size"
    dbavalidate              = "Sqlcollaborative.Dbatools.Utility.Validation"
    DbaMode                  = "Sqlcollaborative.Dbatools.General.ExecutionMode"
    DbaCredential            = "Sqlcollaborative.Dbatools.Parameter.DbaCredentialparameter"
    DbaCredentialParameter   = "Sqlcollaborative.Dbatools.Parameter.DbaCredentialparameter"
    DbaDatabaseSmo           = "SqlCollaborative.Dbatools.Parameter.DbaDatabaseSmoParameter"
    DbaDatabaseSmoParameter  = "SqlCollaborative.Dbatools.Parameter.DbaDatabaseSmoParameter"
    DbaDatabase              = "SqlCollaborative.Dbatools.Parameter.DbaDatabaseParameter"
    DbaDatabaseParameter     = "SqlCollaborative.Dbatools.Parameter.DbaDatabaseParameter"
    DbaValidatePattern       = "Sqlcollaborative.Dbatools.Utility.DbaValidatePatternAttribute"
    DbaValidateScript        = "Sqlcollaborative.Dbatools.Utility.DbaValidateScriptAttribute"
}

# Add all type aliases
foreach ($TypeAlias in $TypeAliasTable.Keys) {
    try {
        $TAType::Add($TypeAlias, $TypeAliasTable[$TypeAlias])
    } catch {
    }
}

tools\dbatools\bin\XESmartTarget\CommandLine.dll

md5: EC0E2DD54144D6F6A317B7DAA715D418 | sha1: 62C2E04BBA8436912D9BCEC1EC4D4C7AFC843A47 | sha256: 4923528D3D18689D58FA30B3D822AB72A13BE21A57F13E0BC59B55B864424F7A | sha512: CCAF01F89FAB001EF2DED15B352E1DD2AB3967584A8720ACB7C6B7203240F9C896F7D46600B12E0E86B25B30779B1E5ED59CE97FB3F295AFB11D6391670265EF

tools\dbatools\bin\XESmartTarget\CsvHelper.dll

md5: C899757ED1CF951D4529025FCE183EC4 | sha1: 5C677F74BC6C460B1AFFEADFBA7F3CC4C81ED438 | sha256: 3C4F05B0EC0D23AEF09D09CE4AF8EA2C198FED0A154B72DFE353F350C6358EFA | sha512: EE823343B1E0EDCFCD3FA11249C8078B925A44D7E3A37B061C9D5DE86F7129E1BCAD2A7E182C8DD9D21CFD86698A0F2AA8FD8753152BFC3BA595FCD70C60BE64

tools\dbatools\bin\XESmartTarget\DouglasCrockford.JsMin.dll

md5: F5676A290241101B94366C062D8455CC | sha1: 4AF1BECC059E3F6F73AE1A8B29DF5B798F3A3C6F | sha256: 065884D15E79EA73630B430A7848F7ED6136FCFFC0B9E6C8AE37564EFACF3AE9 | sha512: 35426B8E728B0E5900B0C2A001824F2EABED3B5363AFF868A237CF9A182D71C419E5564D4D7EE9A1423554D0F18ACFD0958E4EF18487DA52D66CB5BF0B3C1732

tools\dbatools\bin\XESmartTarget\NLog.dll

md5: 169A2802F25F1F083432FC099F4B5E6C | sha1: E9AD81EA61A436303978AADC2E96F7968BCD2C5D | sha256: 4B8399F36A0ABEBD8B2A0DC58AF5D83F3A6AE5F2228AC49E1FE9F70497975635 | sha512: D4F6170448183D5839E44C3F5C971327824CC8B9A760DBEF325F3F866D4CA76AAB58D56A3BCE0A802FFC80CD67F0CF4C7A7DD62C48A9B0033098E2811185351B

tools\dbatools\bin\XESmartTarget\NLog.dll.nlog

tools\dbatools\bin\XESmartTarget\SmartFormat.dll

md5: 0B49B13390BF422346590320BB4AC4EC | sha1: 6EB23F32517DC5E7E1466E84AE5E244AE109EFCE | sha256: 59C1973BCD707DBD46FC1367CFFAC884D9BB1B5963553E34CB5555A071F6F606 | sha512: 203947FC6D8B33FDCD3735BC85914A20081B8D8E014B04BFB004D900D6BF4C76153B4212C8D77A3DC25ACF037CAF6EA40EB9B7937CBCD75BC324DC22D7A10AB9

tools\dbatools\bin\XESmartTarget\XESmartTarget.Core.dll

md5: C46795EBDE8392054108D1B8A15F52BB | sha1: 0F135490A1067797684D176E05013FDF8F7DE1EA | sha256: 73330EF03E9C01D02005EEE4CE98DCE2B313311D99F814791D411853DE44AF5E | sha512: ABCF30F6D69258DB2406D1FCD53ACCF320A8168CAD9DB39FD658D6C7E79A9FCDB6F6D21307D5B4CB2D95649647D30D19D43E8741A53C18AE3DE89BB6CAE6D74E

tools\dbatools\bin\xetemplates-metadata.xml

<Objs Version="1.1.0.1" xmlns="http://schemas.microsoft.com/powershell/2004/04">
  <Obj RefId="0">
    <TN RefId="0">
      <T>Deserialized.Selected.System.Management.Automation.PSCustomObject</T>
      <T>Deserialized.System.Management.Automation.PSCustomObject</T>
      <T>Deserialized.System.Object</T>
    </TN>
    <MS>
      <S N="Name">15 Second IO Error</S>
      <S N="Source">Jes Borland</S>
      <I32 N="Compatibility">2012</I32>
      <Nil N="VeryHighLoad" />
    </MS>
  </Obj>
  <Obj RefId="1">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">Activity Detail Tracking</S>
      <S N="Source">Microsoft</S>
      <I32 N="Compatibility">2012</I32>
      <Nil N="VeryHighLoad" />
    </MS>
  </Obj>
  <Obj RefId="2">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">Activity Tracking</S>
      <S N="Source">Microsoft</S>
      <I32 N="Compatibility">2014</I32>
      <Nil N="VeryHighLoad" />
    </MS>
  </Obj>
  <Obj RefId="3">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">Capture SELECT</S>
      <S N="Source">Jes Borland</S>
      <I32 N="Compatibility">2012</I32>
      <Nil N="VeryHighLoad" />
    </MS>
  </Obj>
  <Obj RefId="4">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">Connection Detail Tracking</S>
      <S N="Source">Microsoft</S>
      <I32 N="Compatibility">2012</I32>
      <Nil N="VeryHighLoad" />
    </MS>
  </Obj>
  <Obj RefId="5">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">Connection Tracking</S>
      <S N="Source">Microsoft</S>
      <I32 N="Compatibility">2012</I32>
      <Nil N="VeryHighLoad" />
    </MS>
  </Obj>
  <Obj RefId="6">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">Count Query Locks</S>
      <S N="Source">Microsoft</S>
      <I32 N="Compatibility">2012</I32>
      <Nil N="VeryHighLoad" />
    </MS>
  </Obj>
  <Obj RefId="7">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">Database File I/O</S>
      <S N="Source">Jes Borland</S>
      <I32 N="Compatibility">2012</I32>
      <Nil N="VeryHighLoad" />
    </MS>
  </Obj>
  <Obj RefId="8">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">Database Health 2014</S>
      <S N="Source">Ola Hallengren</S>
      <I32 N="Compatibility">2014</I32>
      <Nil N="VeryHighLoad" />
    </MS>
  </Obj>
  <Obj RefId="9">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">Deadlock Graphs</S>
      <S N="Source">Jes Borland</S>
      <I32 N="Compatibility">2014</I32>
      <Nil N="VeryHighLoad" />
    </MS>
  </Obj>
  <Obj RefId="10">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">Default Profiler Trace</S>
      <S N="Source">Chrissy LeMaire</S>
      <I32 N="Compatibility">2012</I32>
      <Nil N="VeryHighLoad" />
    </MS>
  </Obj>
  <Obj RefId="11">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">Deprecated Feature Usage</S>
      <S N="Source">Christian Gräfe</S>
      <I32 N="Compatibility">2012</I32>
      <Nil N="VeryHighLoad" />
    </MS>
  </Obj>
  <Obj RefId="12">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">Execution Plans</S>
      <S N="Source">Jes Borland</S>
      <I32 N="Compatibility">2012</I32>
      <B N="VeryHighLoad">true</B>
    </MS>
  </Obj>
  <Obj RefId="13">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">Function Executions</S>
      <S N="Source">Jes Borland</S>
      <I32 N="Compatibility">2012</I32>
      <Nil N="VeryHighLoad" />
    </MS>
  </Obj>
  <Obj RefId="14">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">Index Page Splits</S>
      <S N="Source">Jes Borland</S>
      <I32 N="Compatibility">2012</I32>
      <Nil N="VeryHighLoad" />
    </MS>
  </Obj>
  <Obj RefId="15">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">Log File IO Detail Tracking</S>
      <S N="Source">Microsoft</S>
      <I32 N="Compatibility">2012</I32>
      <Nil N="VeryHighLoad" />
    </MS>
  </Obj>
  <Obj RefId="16">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">Log File IO Tracking</S>
      <S N="Source">Microsoft</S>
      <I32 N="Compatibility">2012</I32>
      <Nil N="VeryHighLoad" />
    </MS>
  </Obj>
  <Obj RefId="17">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">Profiler SP Counts</S>
      <S N="Source">Microsoft</S>
      <I32 N="Compatibility">2012</I32>
      <Nil N="VeryHighLoad" />
    </MS>
  </Obj>
  <Obj RefId="18">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">Profiler Standard</S>
      <S N="Source">Microsoft</S>
      <I32 N="Compatibility">2012</I32>
      <Nil N="VeryHighLoad" />
    </MS>
  </Obj>
  <Obj RefId="19">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">Profiler TSQL Duration</S>
      <S N="Source">Microsoft</S>
      <I32 N="Compatibility">2012</I32>
      <Nil N="VeryHighLoad" />
    </MS>
  </Obj>
  <Obj RefId="20">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">Profiler TSQL Locks</S>
      <S N="Source">Microsoft</S>
      <I32 N="Compatibility">2012</I32>
      <Nil N="VeryHighLoad" />
    </MS>
  </Obj>
  <Obj RefId="21">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">Profiler TSQL Replay</S>
      <S N="Source">Microsoft</S>
      <I32 N="Compatibility">2012</I32>
      <Nil N="VeryHighLoad" />
    </MS>
  </Obj>
  <Obj RefId="22">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">Profiler TSQL SPs</S>
      <S N="Source">Microsoft</S>
      <I32 N="Compatibility">2012</I32>
      <Nil N="VeryHighLoad" />
    </MS>
  </Obj>
  <Obj RefId="23">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">Profiler TSQL</S>
      <S N="Source">Microsoft</S>
      <I32 N="Compatibility">2012</I32>
      <Nil N="VeryHighLoad" />
    </MS>
  </Obj>
  <Obj RefId="24">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">Profiler Tuning</S>
      <S N="Source">Microsoft</S>
      <I32 N="Compatibility">2012</I32>
      <Nil N="VeryHighLoad" />
    </MS>
  </Obj>
  <Obj RefId="25">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">Queries and Resources</S>
      <S N="Source">Jes Borland</S>
      <I32 N="Compatibility">2012</I32>
      <Nil N="VeryHighLoad" />
    </MS>
  </Obj>
  <Obj RefId="26">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">Query Batch Detail Sampling</S>
      <S N="Source">Microsoft</S>
      <I32 N="Compatibility">2012</I32>
      <B N="VeryHighLoad">true</B>
    </MS>
  </Obj>
  <Obj RefId="27">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">Query Batch Sampling</S>
      <S N="Source">Microsoft</S>
      <I32 N="Compatibility">2012</I32>
      <Nil N="VeryHighLoad" />
    </MS>
  </Obj>
  <Obj RefId="28">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">Query Batch Tracking</S>
      <S N="Source">Microsoft</S>
      <I32 N="Compatibility">2012</I32>
      <B N="VeryHighLoad">true</B>
    </MS>
  </Obj>
  <Obj RefId="29">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">Query Detail Sampling</S>
      <S N="Source">Microsoft</S>
      <I32 N="Compatibility">2012</I32>
      <Nil N="VeryHighLoad" />
    </MS>
  </Obj>
  <Obj RefId="30">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">Query Detail Tracking</S>
      <S N="Source">Microsoft</S>
      <I32 N="Compatibility">2012</I32>
      <B N="VeryHighLoad">true</B>
    </MS>
  </Obj>
  <Obj RefId="31">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">Query Timeouts</S>
      <S N="Source">Christian Gräfe</S>
      <I32 N="Compatibility">2012</I32>
      <Nil N="VeryHighLoad" />
    </MS>
  </Obj>
  <Obj RefId="32">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">Query Wait Statistics Detail</S>
      <S N="Source">Microsoft</S>
      <I32 N="Compatibility">2012</I32>
      <Nil N="VeryHighLoad" />
    </MS>
  </Obj>
  <Obj RefId="33">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">Query Wait Statistics</S>
      <S N="Source">Jes Borland</S>
      <I32 N="Compatibility">2014</I32>
      <Nil N="VeryHighLoad" />
    </MS>
  </Obj>
  <Obj RefId="34">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">Stored Procedure Parameters</S>
      <S N="Source">Jes Borland</S>
      <I32 N="Compatibility">2012</I32>
      <Nil N="VeryHighLoad" />
    </MS>
  </Obj>
  <Obj RefId="35">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">Blocked Process Report</S>
      <S N="Source">Erin Stellato</S>
      <I32 N="Compatibility">2012</I32>
      <Nil N="VeryHighLoad" />
    </MS>
  </Obj>
  <Obj RefId="36">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">Database Health 2012</S>
      <S N="Source">Ola Hallengren</S>
      <I32 N="Compatibility">2012</I32>
      <Nil N="VeryHighLoad" />
    </MS>
  </Obj>
  <Obj RefId="37">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">Long Running Queries</S>
      <S N="Source">Peter Schott</S>
      <I32 N="Compatibility">2012</I32>
      <Nil N="VeryHighLoad" />
    </MS>
  </Obj><Obj RefId="38">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">Overly Complex Queries</S>
      <S N="Source">Pétur Grétarsson</S>
      <I32 N="Compatibility">2012</I32>
      <Nil N="VeryHighLoad" />
    </MS>
  </Obj>
  <Obj RefId="39">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">Database Health 2016 and Above</S>
      <S N="Source">Ola Hallengren</S>
      <I32 N="Compatibility">2016</I32>
      <Nil N="VeryHighLoad" />
    </MS>
  </Obj>
    <Obj RefId="40">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">AlwaysOn Health Enhanced</S>
      <S N="Source">Jonathan Kehayias</S>
      <I32 N="Compatibility">2014</I32>
      <Nil N="VeryHighLoad" />
    </MS>
  </Obj>
    <Obj RefId="41">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">Login Tracker</S>
      <S N="Source">Chrissy LeMaire</S>
      <I32 N="Compatibility">2012</I32>
      <Nil N="VeryHighLoad" />
    </MS>
  </Obj>
    <Obj RefId="42">
    <TNRef RefId="0" />
    <MS>
      <S N="Name">Failing Queries</S>
      <S N="Source">Sander Stad</S>
      <I32 N="Compatibility">2012</I32>
      <Nil N="VeryHighLoad" />
    </MS>
  </Obj>
</Objs>

tools\dbatools\bin\XEtemplates\Profiler Standard.xml

<event_sessions xmlns="http://schemas.microsoft.com/sqlserver/2008/07/extendedeventconfig">
  <event_session name="Profiler Standard" maxMemory="8" eventRetentionMode="allowSingleEventLoss" trackCausality="true" dispatchLatency="1" maxEventSize="0" memoryPartitionMode="perCpu">
    <templateCategory>
      <!-- _locID_text="templateCategory" _locComment = "" -->Profiler Equivalents</templateCategory>
    <templateName>
      <!-- _locID_text = "templateName" _locComment = "" -->Profiler Standard</templateName>
    <templateDescription>
      <!-- _locID_text = "templateDescription" _locComment = "" -->Matches the 'Standard' template in Profiler. Generic starting point for creating a trace. Captures all stored procedures and Transact-SQL batches that are run. Use to monitor general database server activity.</templateDescription>    
    <event package="sqlserver" name="login">
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_pid" />
      <action package="sqlserver" name="nt_username" />
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="session_id" />
      <parameter name="collect_options_text" value="1" />
    </event>
    <event package="sqlserver" name="logout">
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_pid" />
      <action package="sqlserver" name="nt_username" />
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="session_id" />
    </event>
    <event package="sqlserver" name="existing_connection">
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_pid" />
      <action package="sqlserver" name="nt_username" />
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="session_id" />
      <parameter name="collect_options_text" value="1" />
    </event>
    <event package="sqlserver" name="rpc_completed">
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_pid" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="nt_username" />
      <action package="sqlserver" name="query_hash" />
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="session_id" />
      <predicate>
        <leaf>
          <comparator name="equal_boolean" package="package0"></comparator>
          <global name="is_system" package="sqlserver"></global>
          <value>false</value>
        </leaf>
      </predicate>
    </event>
    <event package="sqlserver" name="sql_batch_completed">
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_pid" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="nt_username" />
      <action package="sqlserver" name="query_hash" />
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="session_id" />
      <predicate>
        <leaf>
          <comparator name="equal_boolean" package="package0"></comparator>
          <global name="is_system" package="sqlserver"></global>
          <value>false</value>
        </leaf>
      </predicate>
    </event>
    <event package="sqlserver" name="sql_batch_starting">
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_pid" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="nt_username" />
      <action package="sqlserver" name="query_hash" />
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="session_id" />
      <predicate>
        <leaf>
          <comparator name="equal_boolean" package="package0"></comparator>
          <global name="is_system" package="sqlserver"></global>
          <value>false</value>
        </leaf>
      </predicate>
    </event>
    <event package="sqlserver" name="attention">
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_pid" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="nt_username" />
      <action package="sqlserver" name="query_hash" />
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="session_id" />
      <predicate>
        <leaf>
          <comparator name="equal_boolean" package="package0"></comparator>
          <global name="is_system" package="sqlserver"></global>
          <value>false</value>
        </leaf>
      </predicate>
    </event>
  </event_session>
</event_sessions>

tools\dbatools\bin\XEtemplates\Profiler TSQL Duration.xml

<event_sessions xmlns="http://schemas.microsoft.com/sqlserver/2008/07/extendedeventconfig">
  <event_session name="Profiler TSQL Duration" maxMemory="4" eventRetentionMode="allowSingleEventLoss" trackCausality="true" dispatchLatency="30" maxEventSize="0" memoryPartitionMode="none">
    <templateCategory>
      <!-- _locID_text="templateCategory" _locComment = "" -->Profiler Equivalents</templateCategory>
    <templateName>
      <!-- _locID_text = "templateName" _locComment = "" -->Profiler TSQL Duration</templateName>
    <templateDescription>
      <!-- _locID_text = "templateDescription" _locComment = "" -->Matches the 'TSQL_Duration' template in Profiler. Captures all Transact-SQL statements submitted to SQL Server by clients and their execution time (in microseconds). Use to identify slow queries. </templateDescription>
    <event package="sqlserver" name="rpc_completed">
      <action package="sqlserver" name="session_id" />              
      <parameter name="collect_data_stream" value="1" />      
      <predicate>
        <and>
          <leaf>
            <comparator name="greater_than_uint64" package="package0"></comparator>
            <global name="database_id" package="sqlserver"></global>
            <value>4</value>
          </leaf>
          <leaf>
            <comparator name="equal_boolean" package="package0"></comparator>
            <global name="is_system" package="sqlserver"></global>
            <value>false</value>
          </leaf>
        </and>
      </predicate>
    </event>
    <event package="sqlserver" name="sql_batch_completed">
      <action package="sqlserver" name="session_id" />
      <predicate>
        <and>
          <leaf>
            <comparator name="greater_than_uint64" package="package0"></comparator>
            <global name="database_id" package="sqlserver"></global>
            <value>4</value>
          </leaf>
          <leaf>
            <comparator name="equal_boolean" package="package0"></comparator>
            <global name="is_system" package="sqlserver"></global>
            <value>false</value>
          </leaf>
        </and>
      </predicate>
    </event>
  </event_session>
</event_sessions>

tools\dbatools\bin\XEtemplates\15 Second IO Error.xml

<event_sessions xmlns="http://schemas.microsoft.com/sqlserver/2008/07/extendedeventconfig">
   <event_session name="15 Second IO Error" maxMemory="4" eventRetentionMode="allowSingleEventLoss" trackCausality="false" dispatchLatency="30" maxEventSize="0" memoryPartitionMode="none">
    <templateCategory>
      <!-- _locID_text="templateCategory" _locComment = "" -->Everyday Extended Events</templateCategory>
    <templateName>
      <!-- _locID_text = "templateName" _locComment = "" -->15 Second IO Error</templateName>
    <templateDescription>
      <!-- _locID_text = "templateDescription" _locComment = "" -->Captures query for reads > 15 seconds and writes > 15 seconds.</templateDescription>
      <event package="sqlserver" name="file_read_completed">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="client_hostname" />
         <action package="sqlserver" name="database_id" />
         <action package="sqlserver" name="database_name" />
         <action package="sqlserver" name="is_system" />
         <action package="sqlserver" name="session_id" />
         <action package="sqlserver" name="sql_text" />
         <parameter name="collect_io_data" value="1" />
         <parameter name="collect_path" value="1" />
         <predicate>
            <leaf>
               <comparator name="greater_than_uint64" package="package0" />
               <event name="file_read_completed" package="sqlserver" field="duration" />
               <value>15000</value>
            </leaf>
         </predicate>
      </event>
      <event package="sqlserver" name="file_write_completed">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="client_hostname" />
         <action package="sqlserver" name="database_id" />
         <action package="sqlserver" name="database_name" />
         <action package="sqlserver" name="is_system" />
         <action package="sqlserver" name="session_id" />
         <action package="sqlserver" name="sql_text" />
         <parameter name="collect_path" value="1" />
         <predicate>
            <leaf>
               <comparator name="greater_than_uint64" package="package0" />
               <event name="file_write_completed" package="sqlserver" field="duration" />
               <value>15000</value>
            </leaf>
         </predicate>
      </event>
      <target package="package0" name="event_file">
         <parameter name="filename" value="15_second_io_error" />
      </target>
   </event_session>
</event_sessions>

tools\dbatools\bin\XEtemplates\Activity Detail Tracking.xml

<event_sessions xmlns="http://schemas.microsoft.com/sqlserver/2008/07/extendedeventconfig">
  <event_session name="Activity Detail Tracking" maxMemory="4" eventRetentionMode="allowSingleEventLoss" trackCausality="true" dispatchLatency="30" maxEventSize="0" memoryPartitionMode="none">
    <templateCategory>
      <!-- _locID_text="templateCategory" _locComment = "" -->System Monitoring</templateCategory>
    <templateName>
      <!-- _locID_text = "templateName" _locComment = "" -->Activity Detail Tracking</templateName>
    <templateDescription>
      <!-- _locID_text = "templateDescription" _locComment = "" -->Similar to the 'Default Trace' that exists in the SQL Trace system. Use this template to track general activity on your system. The difference between this template and the 'Default Trace' is that this template does not include security audit events. If you would like to audit your system you should use the SQL Server Audit feature.</templateDescription>
    <event package="sqlserver" name="database_file_size_change">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_hostname" />
      <action package="sqlserver" name="client_pid" />
      <action package="sqlserver" name="database_id" />
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="is_system" />
      <action package="sqlserver" name="nt_username" />
      <action package="sqlserver" name="server_instance_name" />
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="server_principal_sid" />
      <action package="sqlserver" name="session_id" />
      <action package="sqlserver" name="session_server_principal_name" />
      <parameter name="collect_database_name" value="1" />
    </event>
    <event package="sqlserver" name="database_mirroring_state_change">
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="database_name" />
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="is_system" />
      <action package="sqlserver" name="request_id" />
      <action package="sqlserver" name="server_instance_name" />
      <action package="sqlserver" name="server_principal_sid" />
      <action package="sqlserver" name="session_id" />
      <action package="sqlserver" name="session_server_principal_name" />
      <action package="sqlserver" name="transaction_id" />
    </event>
    <event package="sqlserver" name="error_reported">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_hostname" />
      <action package="sqlserver" name="client_pid" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="database_name" />
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="is_system" />
      <action package="sqlserver" name="nt_username" />
      <action package="sqlserver" name="request_id" />
      <action package="sqlserver" name="server_instance_name" />
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="server_principal_sid" />
      <action package="sqlserver" name="session_id" />
      <action package="sqlserver" name="session_server_principal_name" />
      <action package="sqlserver" name="transaction_id" />
      <predicate>
        <or>
          <or>
            <or>
              <or>
                <leaf>
                  <comparator name="equal_int64" package="package0"></comparator>
                  <event name="error_reported" package="sqlserver" field="error_number"></event>
                  <value>8957</value>
                </leaf>
                <leaf>
                  <comparator name="equal_int64" package="package0"></comparator>
                  <event name="error_reported" package="sqlserver" field="error_number"></event>
                  <value>17550</value>
                </leaf>
              </or>
              <leaf>
                <comparator name="equal_int64" package="package0"></comparator>
                <event name="error_reported" package="sqlserver" field="error_number"></event>
                <value>17551</value>
              </leaf>
            </or>
            <leaf>
              <comparator name="equal_int64" package="package0"></comparator>
              <event name="error_reported" package="sqlserver" field="error_number"></event>
              <value>15457</value>
            </leaf>
          </or>
          <leaf>
            <comparator name="greater_than_int64" package="package0"></comparator>
            <event name="error_reported" package="sqlserver" field="severity"></event>
            <value>18</value>
          </leaf>
        </or>
      </predicate>
    </event>
    <event package="sqlserver" name="full_text_crawl_started">
      <action package="sqlserver" name="database_id" />
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="is_system" />
      <action package="sqlserver" name="server_instance_name" />
      <action package="sqlserver" name="session_id" />
      <action package="sqlserver" name="session_server_principal_name" />
      <action package="sqlserver" name="transaction_id" />
    </event>
    <event package="sqlserver" name="full_text_crawl_stopped">
      <action package="sqlserver" name="database_id" />
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="is_system" />
      <action package="sqlserver" name="server_instance_name" />
      <action package="sqlserver" name="session_id" />
      <action package="sqlserver" name="session_server_principal_name" />
      <action package="sqlserver" name="transaction_id" />
    </event>
    <event package="sqlserver" name="hash_warning">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_hostname" />
      <action package="sqlserver" name="client_pid" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="database_name" />
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="is_system" />
      <action package="sqlserver" name="nt_username" />
      <action package="sqlserver" name="request_id" />
      <action package="sqlserver" name="server_instance_name" />
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="server_principal_sid" />
      <action package="sqlserver" name="session_id" />
      <action package="sqlserver" name="session_resource_group_id" />
      <action package="sqlserver" name="session_server_principal_name" />
      <action package="sqlserver" name="transaction_id" />
      <action package="sqlserver" name="transaction_sequence" />
    </event>
    <event package="sqlserver" name="missing_column_statistics">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_hostname" />
      <action package="sqlserver" name="client_pid" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="database_name" />
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="is_system" />
      <action package="sqlserver" name="nt_username" />
      <action package="sqlserver" name="request_id" />
      <action package="sqlserver" name="server_instance_name" />
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="server_principal_sid" />
      <action package="sqlserver" name="session_id" />
      <action package="sqlserver" name="session_resource_group_id" />
      <action package="sqlserver" name="session_server_principal_name" />
      <action package="sqlserver" name="transaction_id" />
      <action package="sqlserver" name="transaction_sequence" />
    </event>
    <event package="sqlserver" name="missing_join_predicate">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_hostname" />
      <action package="sqlserver" name="client_pid" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="database_name" />
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="is_system" />
      <action package="sqlserver" name="nt_username" />
      <action package="sqlserver" name="request_id" />
      <action package="sqlserver" name="server_instance_name" />
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="server_principal_sid" />
      <action package="sqlserver" name="session_id" />
      <action package="sqlserver" name="session_resource_group_id" />
      <action package="sqlserver" name="session_server_principal_name" />
      <action package="sqlserver" name="transaction_id" />
      <action package="sqlserver" name="transaction_sequence" />
    </event>
    <event package="sqlserver" name="object_altered">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_hostname" />
      <action package="sqlserver" name="client_pid" />
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="is_system" />
      <action package="sqlserver" name="nt_username" />
      <action package="sqlserver" name="request_id" />
      <action package="sqlserver" name="server_instance_name" />
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="server_principal_sid" />
      <action package="sqlserver" name="session_id" />
      <action package="sqlserver" name="session_resource_group_id" />
      <action package="sqlserver" name="session_server_principal_name" />
      <action package="sqlserver" name="transaction_sequence" />
      <parameter name="collect_database_name" value="1" />
      <predicate>
        <or>
          <leaf>
            <comparator name="not_equal_uint64" package="package0"></comparator>
            <event name="object_altered" package="sqlserver" field="database_id"></event>
            <value>2</value>
          </leaf>
          <and>
            <leaf>
              <comparator name="greater_than_int64" package="package0"></comparator>
              <event name="object_altered" package="sqlserver" field="object_id"></event>
              <value>0</value>
            </leaf>
            <not>
              <leaf>
                <comparator name="like_i_sql_unicode_string" package="sqlserver"></comparator>
                <event name="object_altered" package="sqlserver" field="object_name"></event>
                <value><![CDATA[#%]]></value>
              </leaf>
            </not>
          </and>
        </or>
      </predicate>
    </event>
    <event package="sqlserver" name="object_created">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_hostname" />
      <action package="sqlserver" name="client_pid" />
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="is_system" />
      <action package="sqlserver" name="nt_username" />
      <action package="sqlserver" name="request_id" />
      <action package="sqlserver" name="server_instance_name" />
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="server_principal_sid" />
      <action package="sqlserver" name="session_id" />
      <action package="sqlserver" name="session_resource_group_id" />
      <action package="sqlserver" name="session_server_principal_name" />
      <action package="sqlserver" name="transaction_sequence" />
      <parameter name="collect_database_name" value="1" />
      <predicate>
        <or>
          <leaf>
            <comparator name="not_equal_uint64" package="package0"></comparator>
            <event name="object_created" package="sqlserver" field="database_id"></event>
            <value>2</value>
          </leaf>
          <and>
            <leaf>
              <comparator name="greater_than_int64" package="package0"></comparator>
              <event name="object_created" package="sqlserver" field="object_id"></event>
              <value>0</value>
            </leaf>
            <not>
              <leaf>
                <comparator name="like_i_sql_unicode_string" package="sqlserver"></comparator>
                <event name="object_created" package="sqlserver" field="object_name"></event>
                <value><![CDATA[#%]]></value>
              </leaf>
            </not>
          </and>
        </or>
      </predicate>
    </event>
    <event package="sqlserver" name="object_deleted">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_hostname" />
      <action package="sqlserver" name="client_pid" />
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="is_system" />
      <action package="sqlserver" name="nt_username" />
      <action package="sqlserver" name="request_id" />
      <action package="sqlserver" name="server_instance_name" />
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="server_principal_sid" />
      <action package="sqlserver" name="session_id" />
      <action package="sqlserver" name="session_resource_group_id" />
      <action package="sqlserver" name="session_server_principal_name" />
      <action package="sqlserver" name="transaction_sequence" />
      <parameter name="collect_database_name" value="1" />
      <predicate>
        <or>
          <leaf>
            <comparator name="not_equal_uint64" package="package0"></comparator>
            <event name="object_deleted" package="sqlserver" field="database_id"></event>
            <value>2</value>
          </leaf>
          <and>
            <leaf>
              <comparator name="greater_than_int64" package="package0"></comparator>
              <event name="object_deleted" package="sqlserver" field="object_id"></event>
              <value>0</value>
            </leaf>
            <not>
              <leaf>
                <comparator name="like_i_sql_unicode_string" package="sqlserver"></comparator>
                <event name="object_deleted" package="sqlserver" field="object_name"></event>
                <value><![CDATA[#%]]></value>
              </leaf>
            </not>
          </and>
        </or>
      </predicate>
    </event>
    <event package="sqlserver" name="plan_guide_unsuccessful">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_hostname" />
      <action package="sqlserver" name="client_pid" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="database_name" />
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="is_system" />
      <action package="sqlserver" name="nt_username" />
      <action package="sqlserver" name="request_id" />
      <action package="sqlserver" name="server_instance_name" />
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="server_principal_sid" />
      <action package="sqlserver" name="session_id" />
      <action package="sqlserver" name="session_server_principal_name" />
      <action package="sqlserver" name="transaction_id" />
      <action package="sqlserver" name="transaction_sequence" />
    </event>
    <event package="sqlserver" name="server_memory_change">
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="is_system" />
      <action package="sqlserver" name="request_id" />
      <action package="sqlserver" name="server_instance_name" />
      <action package="sqlserver" name="session_id" />
      <action package="sqlserver" name="session_server_principal_name" />
      <action package="sqlserver" name="transaction_id" />
      <action package="sqlserver" name="transaction_sequence" />
    </event>
    <event package="sqlserver" name="server_start_stop">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_hostname" />
      <action package="sqlserver" name="client_pid" />
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="is_system" />
      <action package="sqlserver" name="nt_username" />
      <action package="sqlserver" name="request_id" />
      <action package="sqlserver" name="server_instance_name" />
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="server_principal_sid" />
      <action package="sqlserver" name="session_id" />
      <action package="sqlserver" name="session_server_principal_name" />
    </event>
    <event package="sqlserver" name="sort_warning">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_hostname" />
      <action package="sqlserver" name="client_pid" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="database_name" />
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="is_system" />
      <action package="sqlserver" name="nt_username" />
      <action package="sqlserver" name="request_id" />
      <action package="sqlserver" name="server_instance_name" />
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="server_principal_sid" />
      <action package="sqlserver" name="session_id" />
      <action package="sqlserver" name="session_resource_group_id" />
      <action package="sqlserver" name="session_server_principal_name" />
      <action package="sqlserver" name="transaction_id" />
      <action package="sqlserver" name="transaction_sequence" />
    </event>
  </event_session>
</event_sessions>

tools\dbatools\bin\XEtemplates\Profiler TSQL SPs.xml

<event_sessions xmlns="http://schemas.microsoft.com/sqlserver/2008/07/extendedeventconfig">
  <event_session name="Profiler TSQL SPs" maxMemory="4" eventRetentionMode="allowSingleEventLoss" trackCausality="true" dispatchLatency="30" maxEventSize="0" memoryPartitionMode="none">
    <templateCategory>
      <!-- _locID_text="templateCategory" _locComment = "" -->Profiler Equivalents</templateCategory>
    <templateName>
      <!-- _locID_text = "templateName" _locComment = "" -->Profiler TSQL SPs</templateName>
    <templateDescription>
      <!-- _locID_text = "templateDescription" _locComment = "" -->Matches the 'TSQL_SPs' template in Profiler. Captures detailed information about all executing stored procedures. Use to analyze the component steps of stored procedures. Add the sql_statement_recompile event if you suspect that procedures are being recompiled.</templateDescription>
    <event package="sqlserver" name="existing_connection">
      <action package="sqlserver" name="database_id" />            
      <action package="sqlserver" name="database_name" />            
      <action package="sqlserver" name="session_id" />            
      <action package="sqlserver" name="server_instance_name" />            
    </event>
    <event package="sqlserver" name="login">
      <action package="sqlserver" name="database_id" />            
      <action package="sqlserver" name="database_name" />            
      <action package="sqlserver" name="session_id" />            
      <action package="sqlserver" name="server_instance_name" />            
      <parameter name="collect_options_text" value="1" />
    </event>
    <event package="sqlserver" name="logout">
      <action package="sqlserver" name="database_id" />            
      <action package="sqlserver" name="database_name" />            
      <action package="sqlserver" name="session_id" />            
      <action package="sqlserver" name="server_instance_name" />            
    </event>
    <event package="sqlserver" name="module_end">
      <action package="sqlserver" name="database_id" />            
      <action package="sqlserver" name="database_name" />            
      <action package="sqlserver" name="session_id" />            
      <action package="sqlserver" name="server_instance_name" />                  
    </event>
    <event package="sqlserver" name="module_start">
      <action package="sqlserver" name="database_id" />            
      <action package="sqlserver" name="database_name" />            
      <action package="sqlserver" name="session_id" />            
      <action package="sqlserver" name="server_instance_name" />            
    </event>       
    <event package="sqlserver" name="rpc_starting">
      <action package="sqlserver" name="database_id" />            
      <action package="sqlserver" name="database_name" />            
      <action package="sqlserver" name="session_id" />            
      <action package="sqlserver" name="server_instance_name" />            
      <predicate>
        <and>
          <leaf>
            <comparator name="greater_than_uint64" package="package0"></comparator>
            <global name="database_id" package="sqlserver"></global>
            <value>4</value>
          </leaf>
          <leaf>
            <comparator name="equal_boolean" package="package0"></comparator>
            <global name="is_system" package="sqlserver"></global>
            <value>false</value>
          </leaf>
        </and>
      </predicate>
    </event>
    <event package="sqlserver" name="sp_statement_starting">
      <action package="sqlserver" name="database_id" />            
      <action package="sqlserver" name="database_name" />            
      <action package="sqlserver" name="session_id" />            
      <action package="sqlserver" name="server_instance_name" />            
      <predicate>
        <and>
          <leaf>
            <comparator name="greater_than_uint64" package="package0"></comparator>
            <global name="database_id" package="sqlserver"></global>
            <value>4</value>
          </leaf>
          <leaf>
            <comparator name="equal_boolean" package="package0"></comparator>
            <global name="is_system" package="sqlserver"></global>
            <value>false</value>
          </leaf>
        </and>
      </predicate>
    </event>       
    <event package="sqlserver" name="sql_batch_starting">
      <action package="sqlserver" name="database_id" />            
      <action package="sqlserver" name="database_name" />            
      <action package="sqlserver" name="session_id" />            
      <action package="sqlserver" name="server_instance_name" />            
      <predicate>
        <and>
          <leaf>
            <comparator name="greater_than_uint64" package="package0"></comparator>
            <global name="database_id" package="sqlserver"></global>
            <value>4</value>
          </leaf>
          <leaf>
            <comparator name="equal_boolean" package="package0"></comparator>
            <global name="is_system" package="sqlserver"></global>
            <value>false</value>
          </leaf>
        </and>
      </predicate>
    </event>        
  </event_session>
</event_sessions>

tools\dbatools\bin\XEtemplates\Profiler TSQL.xml

<event_sessions xmlns="http://schemas.microsoft.com/sqlserver/2008/07/extendedeventconfig">
  <event_session name="Profiler TSQL" maxMemory="8" eventRetentionMode="allowSingleEventLoss" trackCausality="true" dispatchLatency="5" maxEventSize="0" memoryPartitionMode="perCpu">
    <templateCategory>
      <!-- _locID_text="templateCategory" _locComment = "" -->Profiler Equivalents</templateCategory>
    <templateName>
      <!-- _locID_text = "templateName" _locComment = "" -->Profiler TSQL</templateName>
    <templateDescription>
      <!-- _locID_text = "templateDescription" _locComment = "" -->Matches the 'TSQL' template in Profiler. Captures all Transact-SQL statements that are submitted to SQL Server by clients and the time issued. Use to debug client applications.</templateDescription>
    <event package="sqlserver" name="login">
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="session_id" />
      <parameter name="collect_options_text" value="1" />
    </event>
    <event package="sqlserver" name="logout">
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="session_id" />
    </event>
    <event package="sqlserver" name="existing_connection">
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="session_id" />
    </event>
    <event package="sqlserver" name="rpc_starting">
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="session_id" />
      <predicate>
        <leaf>
          <comparator name="equal_boolean" package="package0"></comparator>
          <global name="is_system" package="sqlserver"></global>
          <value>false</value>
        </leaf>
      </predicate>
    </event>
    <event package="sqlserver" name="sql_batch_starting">
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="session_id" />
      <predicate>
        <leaf>
          <comparator name="equal_boolean" package="package0"></comparator>
          <global name="is_system" package="sqlserver"></global>
          <value>false</value>
        </leaf>
      </predicate>
    </event>
  </event_session>
</event_sessions>

tools\dbatools\bin\smo\sqlpackage.exe.config

<?xml version="1.0" encoding="utf-8"?>
<configuration>
  <startup useLegacyV2RuntimeActivationPolicy="true">
    <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.6"/>
  </startup>
  <system.diagnostics>
    <!-- 
      Uncomment the settings below to enable tracing.
      Update the initializeData for the TextLogger with the desired trace file path.
    -->
    <!--
    <sources>
      <source name="Microsoft.Data.Tools.Diagnostics.Tracer" switchValue="Error">
        <listeners>
          <add name="TextLogger"
               type="System.Diagnostics.TextWriterTraceListener"
               initializeData="sqlpackage.trace.log"
               traceOutputOptions="DateTime, ThreadId" />
        </listeners>
      </source>
    </sources>
    -->
  </system.diagnostics>
  <!--
  The below runtime setting is a workaround for an issue resulting from a known breaking change in the SQL Server 2012 version of the System CLR Types. The original breaking change and resulting issue are both documented in the “SQL CLR Data Types” section of http://go.microsoft.com/fwlink/?LinkID=271559.
  -->
  <runtime>
    <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
      <dependentAssembly>
        <assemblyIdentity name="Microsoft.SqlServer.Types" publicKeyToken="89845dcd8080cc91" culture="neutral" />
        <bindingRedirect oldVersion="10.0.0.0-13.0.0.0" newVersion="14.0.0.0" />
      </dependentAssembly>
      <dependentAssembly>
        <assemblyIdentity name="Microsoft.SqlServer.TransactSql.ScriptDom" publicKeyToken="89845dcd8080cc91" culture="neutral"/>
        <bindingRedirect oldVersion="12.0.0.0-13.100.0.0" newVersion="14.0.0.0"/>
      </dependentAssembly>
      <dependentAssembly>
        <assemblyIdentity name="Microsoft.SqlServer.Dac" publicKeyToken="b03f5f7f11d50a3a" culture="neutral" />
        <bindingRedirect oldVersion="11.0.0.0-13.0.0.0" newVersion="14.0.0.0" />
      </dependentAssembly>
      <dependentAssembly>
        <assemblyIdentity name="Microsoft.SqlServer.Dac.Extensions" publicKeyToken="b03f5f7f11d50a3a" culture="neutral" />
        <bindingRedirect oldVersion="11.0.0.0-13.0.0.0" newVersion="14.0.0.0" />
      </dependentAssembly>
    </assemblyBinding>
  </runtime>
</configuration>

tools\dbatools\bin\sp_SQLskills_ConvertTraceToEEs.sql


/*****************************************************************************
*   FileName:  sp_SQLskills_ConvertTraceToExtendedEvents.sql
*
*   Summary:   Converts a SQL Trace definition on a SQL Server to a Extended
*                       Events Session using the SQLskills_Trace_XE_Column_Map table
*              to map the column definitions across.
*
*   Date:      October 2014
*
*   SQL Server Versions:
*                       2012, 2014
*         
******************************************************************************
*   Copyright (C) 2011 Jonathan M. Kehayias, SQLskills.com
*   All rights reserved. 
*
*   For more scripts and sample code, check out 
*      http://sqlskills.com/blogs/jonathan
*
*   You may alter this code for your own *non-commercial* purposes. You may
*   republish altered code as long as you include this copyright and give 
*      due credit. 
*
*
*   THIS CODE AND INFORMATION ARE PROVIDED "AS IS" WITHOUT WARRANTY OF 
*   ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED 
*   TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A
*   PARTICULAR PURPOSE. 
*
******************************************************************************/

-- Slight modifications and performance optimizations 
-- by Gianluca Sartori and Chrissy LeMaire

DECLARE @TraceID INT = --TRACEID--
DECLARE @SessionName NVARCHAR(128) = '--SESSIONNAME--'
DECLARE @PrintOutput BIT = 1
DECLARE @Execute BIT = 0

SET NOCOUNT ON

CREATE TABLE [#SQLskills_Trace_XE_Column_Map](
       [trace_event_id] [int] NOT NULL,
       [trace_column_id] [int] NOT NULL,
       [event_package_name] [nvarchar](60) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
       [xe_event_name] [nvarchar](60) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
       [column_name] [nvarchar](256) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
       [action_package_name] [nvarchar](60) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
       [xe_action_name] [nvarchar](60) COLLATE SQL_Latin1_General_CP1_CI_AS NULL
) ON [PRIMARY]

CREATE CLUSTERED INDEX CX_#SQLskills_Trace_XE_Column_Map ON [#SQLskills_Trace_XE_Column_Map](trace_event_id, trace_column_id)
INSERT INTO [#SQLskills_Trace_XE_Column_Map]
SELECT 
       te.trace_event_id,
       tc.trace_column_id AS trace_column_id,
       txem.package_name AS event_package_name,
       txem.xe_event_name,
       tab.column_name,
       CASE WHEN tab.column_name IS NOT NULL THEN NULL ELSE txam.package_name END AS action_package_name,
       CASE WHEN tab.column_name IS NOT NULL THEN NULL ELSE txam.xe_action_name END AS xe_action_name
FROM sys.trace_events AS te
JOIN sys.trace_categories AS cat
       ON te.category_id = cat.category_id
JOIN sys.trace_event_bindings AS teb
       ON te.trace_event_id = teb.trace_event_id
JOIN sys.trace_columns AS tc
       ON teb.trace_column_id = tc.trace_column_id
JOIN sys.trace_xe_event_map AS txem
       ON te.trace_event_id = txem.trace_event_id
LEFT JOIN (
          SELECT  p.name AS event_package_name,
                  o.name AS event_name,
                  oc.name AS column_name
          FROM sys.dm_xe_objects AS o
          INNER JOIN sys.dm_xe_object_columns AS oc 
              ON o.name = oc.object_name 	
              AND o.package_guid = oc.object_package_guid
          CROSS APPLY (
              SELECT name
              FROM sys.dm_xe_packages
              WHERE guid = o.package_guid
                  AND (capabilities IS NULL OR capabilities & 1 = 0)
          ) AS p
          WHERE (o.capabilities IS NULL OR o.capabilities & 1 = 0)
              AND o.object_type = 'event'
              AND oc.column_type = 'data'
       ) as tab
       ON tab.event_package_name COLLATE SQL_Latin1_General_CP1_CI_AS = txem.package_name COLLATE SQL_Latin1_General_CP1_CI_AS
              AND tab.event_name COLLATE SQL_Latin1_General_CP1_CI_AS = txem.xe_event_name COLLATE SQL_Latin1_General_CP1_CI_AS
              AND CASE
                        WHEN tc.name = 'ObjectID' THEN 'object_id'
                        WHEN tc.name = 'Type' THEN 'object_type'
                        --WHEN tc.name = 'NestLevel' THEN 'nest_level'
                        WHEN tc.name = 'ObjectName' THEN 'object_name'
                        WHEN tc.name = 'DatabaseID' THEN 'database_id'
                        WHEN tc.name = 'DatabaseName' THEN 'database_name'
                        WHEN tc.name = 'IndexID' THEN 'index_id'
                        WHEN tc.name = 'Reads' THEN 'logical_reads'
                        WHEN tc.name = 'CPU' THEN 'cpu_time'
                        WHEN tc.name = 'RowCounts' THEN 'row_count'
                        --WHEN tc.name = 'Severity' THEN 'error_severity'
                        --WHEN tc.name = 'Type' THEN 'object_type'
                        WHEN tc.name = 'Error' THEN 'error_number'
                        ELSE tc.name
                  END = tab.column_name
LEFT JOIN sys.trace_xe_action_map AS txam
       ON tc.trace_column_id = txam.trace_column_id
WHERE cat.name NOT IN ('User configurable')
  AND tc.name NOT IN ('EventClass', 'StartTime', 'EndTime')
  AND (tab.column_name IS NOT NULL
              OR txam.xe_action_name IS NOT NULL)
UNION ALL 
SELECT 
       CAST(trace_event_id AS INT) AS trace_event_id, 
--     trace_event_name, 
       CAST(trace_column_id AS INT) AS trace_column_id, 
--     trace_column_name, 
       event_package_name, 
       xe_event_name, 
       NULLIF(column_name, '') AS column_name, 
       NULLIF(action_package_name, '') AS action_package_name,
       NULLIF(xe_action_name, '') AS xe_action_name
FROM
(
       VALUES 
              ('10', 'RPC:Completed', '1', 'TextData', 'sqlserver', 'rpc_completed', 'statement', '', ''),
              ('10', 'RPC:Completed', '31', 'Error', 'sqlserver', 'rpc_completed', 'result', '', ''),
              ('11', 'RPC:Starting', '1', 'TextData', 'sqlserver', 'rpc_starting', 'statement', '', ''),
              ('12', 'SQL:BatchCompleted', '1', 'TextData', 'sqlserver', 'sql_batch_completed', 'batch_text', '', ''),
              ('12', 'SQL:BatchCompleted', '31', 'Error', 'sqlserver', 'sql_batch_completed', 'result', '', ''),
              ('13', 'SQL:BatchStarting', '1', 'TextData', 'sqlserver', 'sql_batch_starting', 'batch_text', '', ''),
              ('14', 'Audit Login', '1', 'TextData', 'sqlserver', 'login', 'options_text', '', ''),
              ('14', 'Audit Login', '2', 'BinaryData', 'sqlserver', 'login', 'options', '', ''),
              ('14', 'Audit Login', '25', 'IntegerData', 'sqlserver', 'login', 'packet_size', '', ''),
              ('17', 'ExistingConnection', '1', 'TextData', 'sqlserver', 'existing_connection', 'options_text', '', ''),
              ('17', 'ExistingConnection', '2', 'BinaryData', 'sqlserver', 'existing_connection', 'options', '', ''),
              ('17', 'ExistingConnection', '25', 'IntegerData', 'sqlserver', 'existing_connection', 'packet_size', '', ''),
              ('18', 'Audit Server Starts And Stops', '21', 'EventSubClass', 'sqlserver', 'server_start_stop', 'operation', '', ''),
              ('19', 'DTCTransaction', '2', 'BinaryData', 'sqlserver', 'dtc_transaction', 'unit_of_work_id', '', ''),
              ('19', 'DTCTransaction', '21', 'EventSubClass', 'sqlserver', 'dtc_transaction', 'transaction_state', '', ''),
              ('19', 'DTCTransaction', '25', 'IntegerData', 'sqlserver', 'dtc_transaction', 'isolation_level', '', ''),
              ('21', 'EventLog', '1', 'TextData', 'sqlserver', 'error_reported', 'message', '', ''),
              ('22', 'ErrorLog', '1', 'TextData', 'sqlserver', 'errorlog_written', 'message', '', ''),
              ('23', 'Lock:Released', '1', 'TextData', 'sqlserver', 'lock_released', 'resource_description', '', ''),
              ('23', 'Lock:Released', '2', 'BinaryData', 'sqlserver', 'lock_released', 'lockspace_workspace_id', '', ''),
              ('23', 'Lock:Released', '52', 'BigintData1', 'sqlserver', 'lock_released', 'resource_2', '', ''),
              ('23', 'Lock:Released', '56', 'ObjectID2', 'sqlserver', 'lock_released', 'associated_object_id', '', ''),
              ('23', 'Lock:Released', '57', 'Type', 'sqlserver', 'lock_released', 'resource_type', '', ''),
              ('23', 'Lock:Released', '58', 'OwnerID', 'sqlserver', 'lock_released', 'owner_type', '', ''),
              ('24', 'Lock:Acquired', '1', 'TextData', 'sqlserver', 'lock_acquired', 'resource_description', '', ''),
              ('24', 'Lock:Acquired', '2', 'BinaryData', 'sqlserver', 'lock_acquired', 'lockspace_workspace_id', '', ''),
              ('24', 'Lock:Acquired', '52', 'BigintData1', 'sqlserver', 'lock_acquired', 'resource_2', '', ''),
              ('24', 'Lock:Acquired', '56', 'ObjectID2', 'sqlserver', 'lock_acquired', 'associated_object_id', '', ''),
              ('24', 'Lock:Acquired', '57', 'Type', 'sqlserver', 'lock_acquired', 'resource_type', '', ''),
              ('24', 'Lock:Acquired', '58', 'OwnerID', 'sqlserver', 'lock_acquired', 'owner_type', '', ''),
              ('25', 'Lock:Deadlock', '1', 'TextData', 'sqlserver', 'lock_deadlock', 'resource_description', '', ''),
              ('25', 'Lock:Deadlock', '2', 'BinaryData', 'sqlserver', 'lock_deadlock', 'lockspace_workspace_id', '', ''),
              ('25', 'Lock:Deadlock', '25', 'IntegerData', 'sqlserver', 'lock_deadlock', 'deadlock_id', '', ''),
              ('25', 'Lock:Deadlock', '56', 'ObjectID2', 'sqlserver', 'lock_deadlock', 'associated_object_id', '', ''),
              ('25', 'Lock:Deadlock', '57', 'Type', 'sqlserver', 'lock_deadlock', 'resource_type', '', ''),
              ('25', 'Lock:Deadlock', '58', 'OwnerID', 'sqlserver', 'lock_deadlock', 'owner_type', '', ''),
              ('26', 'Lock:Cancel', '1', 'TextData', 'sqlserver', 'lock_cancel', 'resource_description', '', ''),
              ('26', 'Lock:Cancel', '2', 'BinaryData', 'sqlserver', 'lock_cancel', 'lockspace_workspace_id', '', ''),
              ('26', 'Lock:Cancel', '52', 'BigintData1', 'sqlserver', 'lock_cancel', 'resource_2', '', ''),
              ('26', 'Lock:Cancel', '56', 'ObjectID2', 'sqlserver', 'lock_cancel', 'associated_object_id', '', ''),
              ('26', 'Lock:Cancel', '57', 'Type', 'sqlserver', 'lock_cancel', 'resource_type', '', ''),
              ('26', 'Lock:Cancel', '58', 'OwnerID', 'sqlserver', 'lock_cancel', 'owner_type', '', ''),
              ('27', 'Lock:Timeout', '1', 'TextData', 'sqlserver', 'lock_timeout', 'resource_description', '', ''),
              ('27', 'Lock:Timeout', '2', 'BinaryData', 'sqlserver', 'lock_timeout', 'lockspace_workspace_id', '', ''),
              ('27', 'Lock:Timeout', '56', 'ObjectID2', 'sqlserver', 'lock_timeout', 'associated_object_id', '', ''),
              ('27', 'Lock:Timeout', '57', 'Type', 'sqlserver', 'lock_timeout', 'resource_type', '', ''),
              ('27', 'Lock:Timeout', '58', 'OwnerID', 'sqlserver', 'lock_timeout', 'owner_type', '', ''),
              ('28', 'Degree of Parallelism', '2', 'BinaryData', 'sqlserver', 'degree_of_parallelism', 'dop', '', ''),
              ('28', 'Degree of Parallelism', '21', 'EventSubClass', 'sqlserver', 'degree_of_parallelism', 'statement_type', '', ''),
              ('28', 'Degree of Parallelism', '25', 'IntegerData', 'sqlserver', 'degree_of_parallelism', 'workspace_memory_grant_kb', '', ''),
              ('34', 'SP:CacheMiss', '1', 'TextData', 'sqlserver', 'sp_cache_miss', 'cached_text', '', ''),
              ('34', 'SP:CacheMiss', '28', 'ObjectType', 'sqlserver', 'sp_cache_miss', 'object_type', '', ''),
              ('35', 'SP:CacheInsert', '1', 'TextData', 'sqlserver', 'sp_cache_insert', 'cached_text', '', ''),
              ('35', 'SP:CacheInsert', '28', 'ObjectType', 'sqlserver', 'sp_cache_insert', 'object_type', '', ''),
              ('36', 'SP:CacheRemove', '1', 'TextData', 'sqlserver', 'sp_cache_remove', 'cached_text', '', ''),
              ('36', 'SP:CacheRemove', '21', 'EventSubClass', 'sqlserver', 'sp_cache_remove', 'remove_method', '', ''),
              ('36', 'SP:CacheRemove', '28', 'ObjectType', 'sqlserver', 'sp_cache_remove', 'object_type', '', ''),
              ('37', 'SP:Recompile', '1', 'TextData', 'sqlserver', 'sql_statement_recompile', 'statement', '', ''),
              ('37', 'SP:Recompile', '21', 'EventSubClass', 'sqlserver', 'sql_statement_recompile', 'recompile_cause', '', ''),
              ('37', 'SP:Recompile', '28', 'ObjectType', 'sqlserver', 'sql_statement_recompile', 'object_type', '', ''),
              ('37', 'SP:Recompile', '29', 'NestLevel', 'sqlserver', 'sql_statement_recompile', 'nest_level', '', ''),
              ('37', 'SP:Recompile', '55', 'IntegerData2', 'sqlserver', 'sql_statement_recompile', 'offset_end', '', ''),
              ('38', 'SP:CacheHit', '1', 'TextData', 'sqlserver', 'sp_cache_hit', 'cached_text', '', ''),
              ('38', 'SP:CacheHit', '28', 'ObjectType', 'sqlserver', 'sp_cache_hit', 'object_type', '', ''),
              ('40', 'SQL:StmtStarting', '1', 'TextData', 'sqlserver', 'sql_statement_starting', 'statement', '', ''),
              ('40', 'SQL:StmtStarting', '29', 'NestLevel', 'sqlserver', 'sql_statement_starting', '', 'sqlserver', 'tsql_stack'),
              ('40', 'SQL:StmtStarting', '55', 'IntegerData2', 'sqlserver', 'sql_statement_starting', 'offset_end', '', ''),
              ('41', 'SQL:StmtCompleted', '1', 'TextData', 'sqlserver', 'sql_statement_completed', 'statement', '', ''),
              ('41', 'SQL:StmtCompleted', '25', 'IntegerData', 'sqlserver', 'sql_statement_completed', 'row_count', '', ''),
              ('41', 'SQL:StmtCompleted', '29', 'NestLevel', 'sqlserver', 'sql_statement_completed', '', 'sqlserver', 'tsql_stack'),
              ('41', 'SQL:StmtCompleted', '55', 'IntegerData2', 'sqlserver', 'sql_statement_completed', 'offset_end', '', ''),
              ('42', 'SP:Starting', '1', 'TextData', 'sqlserver', 'module_start', 'statement', '', ''),
              ('42', 'SP:Starting', '28', 'ObjectType', 'sqlserver', 'module_start', 'object_type', '', ''),
              ('42', 'SP:Starting', '29', 'NestLevel', 'sqlserver', 'module_start', '', 'sqlserver', 'tsql_stack'),
              ('42', 'SP:Starting', '62', 'SourceDatabaseID', 'sqlserver', 'module_start', 'source_database_id', '', ''),
              ('43', 'SP:Completed', '1', 'TextData', 'sqlserver', 'module_end', 'statement', '', ''),
              ('43', 'SP:Completed', '28', 'ObjectType', 'sqlserver', 'module_end', 'object_type', '', ''),
              ('43', 'SP:Completed', '29', 'NestLevel', 'sqlserver', 'module_end', '', 'sqlserver', 'tsql_stack'),
              ('43', 'SP:Completed', '62', 'SourceDatabaseID', 'sqlserver', 'module_end', 'source_database_id', '', ''),
              ('44', 'SP:StmtStarting', '1', 'TextData', 'sqlserver', 'sp_statement_starting', 'statement', '', ''),
              ('44', 'SP:StmtStarting', '28', 'ObjectType', 'sqlserver', 'sp_statement_starting', 'object_type', '', ''),
              ('44', 'SP:StmtStarting', '29', 'NestLevel', 'sqlserver', 'sp_statement_starting', 'nest_level', '', ''),
              ('44', 'SP:StmtStarting', '55', 'IntegerData2', 'sqlserver', 'sp_statement_starting', 'offset_end', '', ''),
              ('44', 'SP:StmtStarting', '62', 'SourceDatabaseID', 'sqlserver', 'sp_statement_starting', 'source_database_id', '', ''),
              ('45', 'SP:StmtCompleted', '1', 'TextData', 'sqlserver', 'sp_statement_completed', 'statement', '', ''),
              ('45', 'SP:StmtCompleted', '28', 'ObjectType', 'sqlserver', 'sp_statement_completed', 'object_type', '', ''),
              ('45', 'SP:StmtCompleted', '29', 'NestLevel', 'sqlserver', 'sp_statement_completed', 'nest_level', '', ''),
              ('45', 'SP:StmtCompleted', '55', 'IntegerData2', 'sqlserver', 'sp_statement_completed', 'offset_end', '', ''),
              ('45', 'SP:StmtCompleted', '62', 'SourceDatabaseID', 'sqlserver', 'sp_statement_completed', 'source_database_id', '', ''),
              ('46', 'Object:Created', '21', 'EventSubClass', 'sqlserver', 'object_created', 'ddl_phase', '', ''),
              --('46', 'Object:Created', '25', 'IntegerData', 'sqlserver', 'object_created', '', 'package0', 'attach_activity_id'),
              ('46', 'Object:Created', '28', 'ObjectType', 'sqlserver', 'object_created', 'object_type', '', ''),
              ('46', 'Object:Created', '56', 'ObjectID2', 'sqlserver', 'object_created', 'related_object_id', '', ''),
              ('47', 'Object:Deleted', '21', 'EventSubClass', 'sqlserver', 'object_deleted', 'ddl_phase', '', ''),
              --('47', 'Object:Deleted', '25', 'IntegerData', 'sqlserver', 'object_deleted', '', 'package0', 'attach_activity_id'),
              ('47', 'Object:Deleted', '28', 'ObjectType', 'sqlserver', 'object_deleted', 'object_type', '', ''),
              ('47', 'Object:Deleted', '56', 'ObjectID2', 'sqlserver', 'object_deleted', 'related_object_id', '', ''),
              ('50', 'SQLTransaction', '21', 'EventSubClass', 'sqlserver', 'sql_transaction', 'transaction_state', '', ''),
              ('50', 'SQLTransaction', '25', 'IntegerData', 'sqlserver', 'sql_transaction', 'transaction_type', '', ''),
              ('53', 'CursorOpen', '25', 'IntegerData', 'sqlserver', 'cursor_open', 'cursor_type', '', ''),
              ('53', 'CursorOpen', '33', 'Handle', 'sqlserver', 'cursor_open', 'protocol_execution_id', '', ''),
              ('54', 'TransactionLog', '22', 'ObjectID', 'sqlserver', 'transaction_log', 'alloc_unit_id', '', ''),
              ('54', 'TransactionLog', '24', 'IndexID', 'sqlserver', 'transaction_log', 'alloc_unit_id', '', ''),
              ('55', 'Hash Warning', '21', 'EventSubClass', 'sqlserver', 'hash_warning', 'hash_warning_type', '', ''),
              ('55', 'Hash Warning', '22', 'ObjectID', 'sqlserver', 'hash_warning', 'query_operation_node_id', '', ''),
              ('55', 'Hash Warning', '25', 'IntegerData', 'sqlserver', 'hash_warning', 'recursion_level', '', ''),
              ('58', 'Auto Stats', '1', 'TextData', 'sqlserver', 'auto_stats', 'statistics_list', '', ''),
              ('58', 'Auto Stats', '21', 'EventSubClass', 'sqlserver', 'auto_stats', 'status', '', ''),
              ('58', 'Auto Stats', '25', 'IntegerData', 'sqlserver', 'auto_stats', 'count', '', ''),
              ('58', 'Auto Stats', '31', 'Error', 'sqlserver', 'auto_stats', 'last_error', '', ''),
              ('58', 'Auto Stats', '55', 'IntegerData2', 'sqlserver', 'auto_stats', 'job_id', '', ''),
              ('58', 'Auto Stats', '57', 'Type', 'sqlserver', 'auto_stats', 'job_type', '', ''),
              ('59', 'Lock:Deadlock Chain', '1', 'TextData', 'sqlserver', 'lock_deadlock_chain', 'resource_description', '', ''),
              ('59', 'Lock:Deadlock Chain', '2', 'BinaryData', 'sqlserver', 'lock_deadlock_chain', 'lockspace_workspace_id', '', ''),
              ('59', 'Lock:Deadlock Chain', '21', 'EventSubClass', 'sqlserver', 'lock_deadlock_chain', 'resource_owner_type', '', ''),
              ('59', 'Lock:Deadlock Chain', '25', 'IntegerData', 'sqlserver', 'lock_deadlock_chain', 'deadlock_id', '', ''),
              ('59', 'Lock:Deadlock Chain', '56', 'ObjectID2', 'sqlserver', 'lock_deadlock_chain', 'associated_object_id', '', ''),
              ('59', 'Lock:Deadlock Chain', '57', 'Type', 'sqlserver', 'lock_deadlock_chain', 'resource_type', '', ''),
              ('59', 'Lock:Deadlock Chain', '58', 'OwnerID', 'sqlserver', 'lock_deadlock_chain', 'owner_type', '', ''),
              ('60', 'Lock:Escalation', '1', 'TextData', 'sqlserver', 'lock_escalation', 'statement', '', ''),
              ('60', 'Lock:Escalation', '21', 'EventSubClass', 'sqlserver', 'lock_escalation', 'escalation_cause', '', ''),
              ('60', 'Lock:Escalation', '25', 'IntegerData', 'sqlserver', 'lock_escalation', 'hobt_lock_count', '', ''),
              ('60', 'Lock:Escalation', '55', 'IntegerData2', 'sqlserver', 'lock_escalation', 'escalated_lock_count', '', ''),
              ('60', 'Lock:Escalation', '56', 'ObjectID2', 'sqlserver', 'lock_escalation', 'hobt_id', '', ''),
              ('60', 'Lock:Escalation', '57', 'Type', 'sqlserver', 'lock_escalation', 'resource_type', '', ''),
              ('60', 'Lock:Escalation', '58', 'OwnerID', 'sqlserver', 'lock_escalation', 'owner_type', '', ''),
              ('61', 'OLEDB Errors', '1', 'TextData', 'sqlserver', 'oledb_error', 'parameters', '', ''),
              ('61', 'OLEDB Errors', '31', 'Error', 'sqlserver', 'oledb_error', 'hresult', '', ''),
              ('61', 'OLEDB Errors', '45', 'LinkedServerName', 'sqlserver', 'oledb_error', 'linked_server_name', '', ''),
              ('61', 'OLEDB Errors', '46', 'ProviderName', 'sqlserver', 'oledb_error', 'provider_name', '', ''),
              ('61', 'OLEDB Errors', '47', 'MethodName', 'sqlserver', 'oledb_error', 'method_name', '', ''),
              ('67', 'Execution Warnings', '1', 'TextData', 'sqlserver', 'execution_warning', 'server_memory_grants', '', ''),
              ('67', 'Execution Warnings', '21', 'EventSubClass', 'sqlserver', 'execution_warning', 'warning_type', '', ''),
              ('68', 'Showplan Text (Unencoded)', '1', 'TextData', 'sqlserver', 'query_pre_execution_showplan', 'showplan_xml', '', ''),
              ('68', 'Showplan Text (Unencoded)', '2', 'BinaryData', 'sqlserver', 'query_pre_execution_showplan', 'estimated_cost', '', ''),
              ('68', 'Showplan Text (Unencoded)', '25', 'IntegerData', 'sqlserver', 'query_pre_execution_showplan', 'estimated_rows', '', ''),
              ('68', 'Showplan Text (Unencoded)', '28', 'ObjectType', 'sqlserver', 'query_pre_execution_showplan', 'object_type', '', ''),
              ('68', 'Showplan Text (Unencoded)', '29', 'NestLevel', 'sqlserver', 'query_pre_execution_showplan', 'nest_level', '', ''),
              ('69', 'Sort Warnings', '21', 'EventSubClass', 'sqlserver', 'sort_warning', 'sort_warning_type', '', ''),
              ('70', 'CursorPrepare', '33', 'Handle', 'sqlserver', 'cursor_prepare', 'protocol_execution_id', '', ''),
              ('71', 'Prepare SQL', '33', 'Handle', 'sqlserver', 'prepare_sql', 'statement_handle', '', ''),
              ('72', 'Exec Prepared SQL', '33', 'Handle', 'sqlserver', 'exec_prepared_sql', 'statement_handle', '', ''),
              ('73', 'Unprepare SQL', '33', 'Handle', 'sqlserver', 'unprepare_sql', 'statement_handle', '', ''),
              ('74', 'CursorExecute', '25', 'IntegerData', 'sqlserver', 'cursor_execute', 'cursor_type', '', ''),
              ('74', 'CursorExecute', '33', 'Handle', 'sqlserver', 'cursor_execute', 'protocol_execution_id', '', ''),
              ('76', 'CursorImplicitConversion', '2', 'BinaryData', 'sqlserver', 'cursor_implicit_conversion', 'final_cursor_type', '', ''),
              ('76', 'CursorImplicitConversion', '25', 'IntegerData', 'sqlserver', 'cursor_implicit_conversion', 'initial_cursor_type', '', ''),
              ('76', 'CursorImplicitConversion', '33', 'Handle', 'sqlserver', 'cursor_implicit_conversion', 'protocol_execution_id', '', ''),
              ('77', 'CursorUnprepare', '33', 'Handle', 'sqlserver', 'cursor_unprepare', 'protocol_execution_id', '', ''),
              ('78', 'CursorClose', '33', 'Handle', 'sqlserver', 'cursor_close', 'protocol_execution_id', '', ''),
              ('79', 'Missing Column Statistics', '1', 'TextData', 'sqlserver', 'missing_column_statistics', 'column_list', '', ''),
              ('81', 'Server Memory Change', '21', 'EventSubClass', 'sqlserver', 'server_memory_change', 'memory_change', '', ''),
              ('81', 'Server Memory Change', '25', 'IntegerData', 'sqlserver', 'server_memory_change', 'new_memory_size_mb', '', ''),
              ('92', 'Data File Auto Grow', '25', 'IntegerData', 'sqlserver', 'database_file_size_change', 'size_change_kb', '', ''),
              ('92', 'Data File Auto Grow', '36', 'FileName', 'sqlserver', 'database_file_size_change', 'file_name', '', ''),
              ('93', 'Log File Auto Grow', '25', 'IntegerData', 'sqlserver', 'database_file_size_change', 'size_change_kb', '', ''),
              ('93', 'Log File Auto Grow', '36', 'FileName', 'sqlserver', 'database_file_size_change', 'file_name', '', ''),
              ('94', 'Data File Auto Shrink', '25', 'IntegerData', 'sqlserver', 'database_file_size_change', 'size_change_kb', '', ''),
              ('94', 'Data File Auto Shrink', '36', 'FileName', 'sqlserver', 'database_file_size_change', 'file_name', '', ''),
              ('95', 'Log File Auto Shrink', '25', 'IntegerData', 'sqlserver', 'database_file_size_change', 'size_change_kb', '', ''),
              ('95', 'Log File Auto Shrink', '36', 'FileName', 'sqlserver', 'database_file_size_change', 'file_name', '', ''),
              ('96', 'Showplan Text', '2', 'BinaryData', 'sqlserver', 'query_pre_execution_showplan', 'estimated_cost', '', ''),
              ('96', 'Showplan Text', '25', 'IntegerData', 'sqlserver', 'query_pre_execution_showplan', 'estimated_rows', '', ''),
              ('96', 'Showplan Text', '28', 'ObjectType', 'sqlserver', 'query_pre_execution_showplan', 'object_type', '', ''),
              ('96', 'Showplan Text', '29', 'NestLevel', 'sqlserver', 'query_pre_execution_showplan', 'nest_level', '', ''),
              ('97', 'Showplan All', '2', 'BinaryData', 'sqlserver', 'query_pre_execution_showplan', 'estimated_cost', '', ''),
              ('97', 'Showplan All', '25', 'IntegerData', 'sqlserver', 'query_pre_execution_showplan', 'estimated_rows', '', ''),
              ('97', 'Showplan All', '28', 'ObjectType', 'sqlserver', 'query_pre_execution_showplan', 'object_type', '', ''),
              ('97', 'Showplan All', '29', 'NestLevel', 'sqlserver', 'query_pre_execution_showplan', 'nest_level', '', ''),
              ('98', 'Showplan Statistics Profile', '2', 'BinaryData', 'sqlserver', 'query_post_execution_showplan', 'estimated_cost', '', ''),
              ('98', 'Showplan Statistics Profile', '25', 'IntegerData', 'sqlserver', 'query_post_execution_showplan', 'estimated_rows', '', ''),
              ('98', 'Showplan Statistics Profile', '28', 'ObjectType', 'sqlserver', 'query_post_execution_showplan', 'object_type', '', ''),
              ('98', 'Showplan Statistics Profile', '29', 'NestLevel', 'sqlserver', 'query_post_execution_showplan', 'nest_level', '', ''),
              ('100', 'RPC Output Parameter', '1', 'TextData', 'sqlserver', 'rpc_completed', 'output_parameters', '', ''),
              ('119', 'OLEDB Call Event', '1', 'TextData', 'sqlserver', 'oledb_call', 'parameters', '', ''),
              ('119', 'OLEDB Call Event', '21', 'EventSubClass', 'sqlserver', 'oledb_call', 'opcode', '', ''),
              ('119', 'OLEDB Call Event', '31', 'Error', 'sqlserver', 'oledb_call', 'hresult', '', ''),
              ('119', 'OLEDB Call Event', '45', 'LinkedServerName', 'sqlserver', 'oledb_call', 'linked_server_name', '', ''),
              ('119', 'OLEDB Call Event', '46', 'ProviderName', 'sqlserver', 'oledb_call', 'provider_name', '', ''),
              ('119', 'OLEDB Call Event', '47', 'MethodName', 'sqlserver', 'oledb_call', 'method_name', '', ''),
              ('120', 'OLEDB QueryInterface Event', '1', 'TextData', 'sqlserver', 'oledb_query_interface', 'parameters', '', ''),
              ('120', 'OLEDB QueryInterface Event', '21', 'EventSubClass', 'sqlserver', 'oledb_query_interface', 'opcode', '', ''),
              ('120', 'OLEDB QueryInterface Event', '31', 'Error', 'sqlserver', 'oledb_query_interface', 'hresult', '', ''),
              ('120', 'OLEDB QueryInterface Event', '45', 'LinkedServerName', 'sqlserver', 'oledb_query_interface', 'linked_server_name', '', ''),
              ('120', 'OLEDB QueryInterface Event', '46', 'ProviderName', 'sqlserver', 'oledb_query_interface', 'provider_name', '', ''),
              ('120', 'OLEDB QueryInterface Event', '47', 'MethodName', 'sqlserver', 'oledb_query_interface', 'method_name', '', ''),
              ('121', 'OLEDB DataRead Event', '1', 'TextData', 'sqlserver', 'oledb_data_read', 'parameters', '', ''),
              ('121', 'OLEDB DataRead Event', '21', 'EventSubClass', 'sqlserver', 'oledb_data_read', 'opcode', '', ''),
              ('121', 'OLEDB DataRead Event', '31', 'Error', 'sqlserver', 'oledb_data_read', 'hresult', '', ''),
              ('121', 'OLEDB DataRead Event', '45', 'LinkedServerName', 'sqlserver', 'oledb_data_read', 'linked_server_name', '', ''),
              ('121', 'OLEDB DataRead Event', '46', 'ProviderName', 'sqlserver', 'oledb_data_read', 'provider_name', '', ''),
              ('121', 'OLEDB DataRead Event', '47', 'MethodName', 'sqlserver', 'oledb_data_read', 'method_name', '', ''),
              ('122', 'Showplan XML', '1', 'TextData', 'sqlserver', 'query_pre_execution_showplan', 'showplan_xml', '', ''),
              ('122', 'Showplan XML', '2', 'BinaryData', 'sqlserver', 'query_pre_execution_showplan', 'estimated_cost', '', ''),
              ('122', 'Showplan XML', '25', 'IntegerData', 'sqlserver', 'query_pre_execution_showplan', 'estimated_rows', '', ''),
              ('122', 'Showplan XML', '28', 'ObjectType', 'sqlserver', 'query_pre_execution_showplan', 'object_type', '', ''),
              ('122', 'Showplan XML', '29', 'NestLevel', 'sqlserver', 'query_pre_execution_showplan', 'nest_level', '', ''),
              ('124', 'Broker:Conversation', '1', 'TextData', 'sqlserver', 'broker_conversation', 'conversation_state', '', ''),
              ('124', 'Broker:Conversation', '21', 'EventSubClass', 'sqlserver', 'broker_conversation', 'conversation_action', '', ''),
              ('124', 'Broker:Conversation', '34', 'ObjectName', 'sqlserver', 'broker_conversation', 'conversation_handle', '', ''),
              ('124', 'Broker:Conversation', '38', 'RoleName', 'sqlserver', 'broker_conversation', 'is_initiator', '', ''),
              ('124', 'Broker:Conversation', '42', 'TargetLoginName', 'sqlserver', 'broker_conversation', 'service_contract_name', '', ''),
              ('124', 'Broker:Conversation', '47', 'MethodName', 'sqlserver', 'broker_conversation', 'conversation_group_id', '', ''),
              ('124', 'Broker:Conversation', '54', 'GUID', 'sqlserver', 'broker_conversation', 'conversation_id', '', ''),
              ('125', 'Deprecation Announcement', '1', 'TextData', 'sqlserver', 'deprecation_announcement', 'message', '', ''),
              ('125', 'Deprecation Announcement', '22', 'ObjectID', 'sqlserver', 'deprecation_announcement', 'feature_id', '', ''),
              ('125', 'Deprecation Announcement', '34', 'ObjectName', 'sqlserver', 'deprecation_announcement', 'feature', '', ''),
              ('125', 'Deprecation Announcement', '55', 'IntegerData2', 'sqlserver', 'deprecation_announcement', '', 'sqlserver', 'tsql_frame'),
              ('126', 'Deprecation Final Support', '1', 'TextData', 'sqlserver', 'deprecation_final_support', 'message', '', ''),
              ('126', 'Deprecation Final Support', '22', 'ObjectID', 'sqlserver', 'deprecation_final_support', 'feature_id', '', ''),
              ('126', 'Deprecation Final Support', '34', 'ObjectName', 'sqlserver', 'deprecation_final_support', 'feature', '', ''),
              ('126', 'Deprecation Final Support', '55', 'IntegerData2', 'sqlserver', 'deprecation_final_support', '', 'sqlserver', 'tsql_frame'),
              ('127', 'Exchange Spill Event', '21', 'EventSubClass', 'sqlserver', 'exchange_spill', 'opcode', '', ''),
              ('127', 'Exchange Spill Event', '22', 'ObjectID', 'sqlserver', 'exchange_spill', 'query_operation_node_id', '', ''),
              ('136', 'Broker:Conversation Group', '21', 'EventSubClass', 'sqlserver', 'broker_conversation_group', 'conversation_group_action', '', ''),
              ('136', 'Broker:Conversation Group', '54', 'GUID', 'sqlserver', 'broker_conversation_group', 'conversation_group_id', '', ''),
              ('137', 'Blocked process report', '1', 'TextData', 'sqlserver', 'blocked_process_report', 'blocked_process', '', ''),
              ('137', 'Blocked process report', '32', 'Mode', 'sqlserver', 'blocked_process_report', 'lock_mode', '', ''),
              ('138', 'Broker:Connection', '1', 'TextData', 'ucs', 'ucs_connection_setup', 'error_message', '', ''),
              ('138', 'Broker:Connection', '21', 'EventSubClass', 'ucs', 'ucs_connection_setup', 'setup_event', '', ''),
              ('138', 'Broker:Connection', '34', 'ObjectName', 'ucs', 'ucs_connection_setup', 'connection_id', '', ''),
              ('138', 'Broker:Connection', '54', 'GUID', 'ucs', 'ucs_connection_setup', 'address', '', ''),
              ('139', 'Broker:Forwarded Message Sent', '22', 'ObjectID', 'sqlserver', 'broker_forwarded_message_sent', 'time_to_live_sec', '', ''),
              ('139', 'Broker:Forwarded Message Sent', '23', 'Success', 'sqlserver', 'broker_forwarded_message_sent', 'live_time_sec', '', ''),
              ('139', 'Broker:Forwarded Message Sent', '24', 'IndexID', 'sqlserver', 'broker_forwarded_message_sent', 'remaining_hop_count', '', ''),
              ('139', 'Broker:Forwarded Message Sent', '25', 'IntegerData', 'sqlserver', 'broker_forwarded_message_sent', 'fragment_number', '', ''),
              ('139', 'Broker:Forwarded Message Sent', '36', 'FileName', 'sqlserver', 'broker_forwarded_message_sent', 'to_service_name', '', ''),
              ('139', 'Broker:Forwarded Message Sent', '37', 'OwnerName', 'sqlserver', 'broker_forwarded_message_sent', 'to_broker_name', '', ''),
              ('139', 'Broker:Forwarded Message Sent', '38', 'RoleName', 'sqlserver', 'broker_forwarded_message_sent', 'is_initiator', '', ''),
              ('139', 'Broker:Forwarded Message Sent', '39', 'TargetUserName', 'sqlserver', 'broker_forwarded_message_sent', 'from_service_name', '', ''),
              ('139', 'Broker:Forwarded Message Sent', '40', 'DBUserName', 'sqlserver', 'broker_forwarded_message_sent', 'from_broker_name', '', ''),
              ('139', 'Broker:Forwarded Message Sent', '42', 'TargetLoginName', 'sqlserver', 'broker_forwarded_message_sent', 'to_broker_name', '', ''),
              ('139', 'Broker:Forwarded Message Sent', '47', 'MethodName', 'sqlserver', 'broker_forwarded_message_sent', 'message_type_name', '', ''),
              ('139', 'Broker:Forwarded Message Sent', '52', 'BigintData1', 'sqlserver', 'broker_forwarded_message_sent', 'message_sequence', '', ''),
              ('139', 'Broker:Forwarded Message Sent', '54', 'GUID', 'sqlserver', 'broker_forwarded_message_sent', 'conversation_id', '', ''),
              ('140', 'Broker:Forwarded Message Dropped', '1', 'TextData', 'sqlserver', 'broker_forwarded_message_dropped', 'dropped_reason', '', ''),
              ('140', 'Broker:Forwarded Message Dropped', '20', 'Severity', 'sqlserver', 'broker_forwarded_message_dropped', 'error_severity', '', ''),
              ('140', 'Broker:Forwarded Message Dropped', '22', 'ObjectID', 'sqlserver', 'broker_forwarded_message_dropped', 'time_to_live_sec', '', ''),
              ('140', 'Broker:Forwarded Message Dropped', '24', 'IndexID', 'sqlserver', 'broker_forwarded_message_dropped', 'remaining_hop_count', '', ''),
              ('140', 'Broker:Forwarded Message Dropped', '25', 'IntegerData', 'sqlserver', 'broker_forwarded_message_dropped', 'fragment_number', '', ''),
              ('140', 'Broker:Forwarded Message Dropped', '30', 'State', 'sqlserver', 'broker_forwarded_message_dropped', 'error_state', '', ''),
              ('140', 'Broker:Forwarded Message Dropped', '36', 'FileName', 'sqlserver', 'broker_forwarded_message_dropped', 'to_service_name', '', ''),
              ('140', 'Broker:Forwarded Message Dropped', '37', 'OwnerName', 'sqlserver', 'broker_forwarded_message_dropped', 'to_broker_name', '', ''),
              ('140', 'Broker:Forwarded Message Dropped', '38', 'RoleName', 'sqlserver', 'broker_forwarded_message_dropped', 'is_initiator', '', ''),
              ('140', 'Broker:Forwarded Message Dropped', '39', 'TargetUserName', 'sqlserver', 'broker_forwarded_message_dropped', 'from_service_name', '', ''),
              ('140', 'Broker:Forwarded Message Dropped', '40', 'DBUserName', 'sqlserver', 'broker_forwarded_message_dropped', 'from_broker_name', '', ''),
              ('140', 'Broker:Forwarded Message Dropped', '42', 'TargetLoginName', 'sqlserver', 'broker_forwarded_message_dropped', 'to_broker_name', '', ''),
              ('140', 'Broker:Forwarded Message Dropped', '47', 'MethodName', 'sqlserver', 'broker_forwarded_message_dropped', 'message_type_name', '', ''),
              ('140', 'Broker:Forwarded Message Dropped', '52', 'BigintData1', 'sqlserver', 'broker_forwarded_message_dropped', 'message_sequence', '', ''),
              ('140', 'Broker:Forwarded Message Dropped', '54', 'GUID', 'sqlserver', 'broker_forwarded_message_dropped', 'conversation_id', '', ''),
              ('141', 'Broker:Message Classify', '21', 'EventSubClass', 'sqlserver', 'broker_message_classify', 'route_type', '', ''),
              ('141', 'Broker:Message Classify', '31', 'Error', 'sqlserver', 'broker_message_classify', 'delayed_error_number', '', ''),
              ('141', 'Broker:Message Classify', '36', 'FileName', 'sqlserver', 'broker_message_classify', 'to_service_name', '', ''),
              ('141', 'Broker:Message Classify', '37', 'OwnerName', 'sqlserver', 'broker_message_classify', 'to_broker_instance', '', ''),
              ('141', 'Broker:Message Classify', '38', 'RoleName', 'sqlserver', 'broker_message_classify', 'is_initiator', '', ''),
              ('141', 'Broker:Message Classify', '45', 'LinkedServerName', 'sqlserver', 'broker_message_classify', 'message_source', '', ''),
              ('141', 'Broker:Message Classify', '54', 'GUID', 'sqlserver', 'broker_message_classify', 'conversation_id', '', ''),
              ('142', 'Broker:Transmission', '20', 'Severity', 'sqlserver', 'broker_transmission_exception', 'error_severity', '', ''),
              ('142', 'Broker:Transmission', '30', 'State', 'sqlserver', 'broker_transmission_exception', 'error_state', '', ''),
              ('146', 'Showplan XML Statistics Profile', '1', 'TextData', 'sqlserver', 'query_post_execution_showplan', 'showplan_xml', '', ''),
              ('146', 'Showplan XML Statistics Profile', '2', 'BinaryData', 'sqlserver', 'query_post_execution_showplan', 'estimated_cost', '', ''),
              ('146', 'Showplan XML Statistics Profile', '25', 'IntegerData', 'sqlserver', 'query_post_execution_showplan', 'estimated_rows', '', ''),
              ('146', 'Showplan XML Statistics Profile', '28', 'ObjectType', 'sqlserver', 'query_post_execution_showplan', 'object_type', '', ''),
              ('146', 'Showplan XML Statistics Profile', '29', 'NestLevel', 'sqlserver', 'query_post_execution_showplan', 'nest_level', '', ''),
              ('148', 'Deadlock graph', '1', 'TextData', 'sqlserver', 'xml_deadlock_report', 'xml_report', '', ''),
              ('149', 'Broker:Remote Message Acknowledgement', '21', 'EventSubClass', 'sqlserver', 'broker_remote_message_acknowledgement', 'acknowledgement_type', '', ''),
              ('149', 'Broker:Remote Message Acknowledgement', '25', 'IntegerData', 'sqlserver', 'broker_remote_message_acknowledgement', 'acknowledgement_fragment_number', '', ''),
              ('149', 'Broker:Remote Message Acknowledgement', '38', 'RoleName', 'sqlserver', 'broker_remote_message_acknowledgement', 'is_initiator', '', ''),
              ('149', 'Broker:Remote Message Acknowledgement', '52', 'BigintData1', 'sqlserver', 'broker_remote_message_acknowledgement', 'acknowlegment_message_sequence', '', ''),
              ('149', 'Broker:Remote Message Acknowledgement', '53', 'BigintData2', 'sqlserver', 'broker_remote_message_acknowledgement', 'message_sequence', '', ''),
              ('149', 'Broker:Remote Message Acknowledgement', '54', 'GUID', 'sqlserver', 'broker_remote_message_acknowledgement', 'conversation_id', '', ''),
              ('149', 'Broker:Remote Message Acknowledgement', '55', 'IntegerData2', 'sqlserver', 'broker_remote_message_acknowledgement', 'fragment_number', '', ''),
              ('155', 'FT:Crawl Started', '1', 'TextData', 'sqlserver', 'full_text_crawl_started', 'crawl_operation', '', ''),
              ('160', 'Broker:Message Undeliverable', '1', 'TextData', 'sqlserver', 'broker_message_undeliverable', 'message_drop_reason', '', ''),
              ('160', 'Broker:Message Undeliverable', '20', 'Severity', 'sqlserver', 'broker_message_undeliverable', 'error_severity', '', ''),
              ('160', 'Broker:Message Undeliverable', '21', 'EventSubClass', 'sqlserver', 'broker_message_undeliverable', 'sequenced_message', '', ''),
              ('160', 'Broker:Message Undeliverable', '25', 'IntegerData', 'sqlserver', 'broker_message_undeliverable', 'message_fragment_number', '', ''),
              ('160', 'Broker:Message Undeliverable', '30', 'State', 'sqlserver', 'broker_message_undeliverable', 'error_state', '', ''),
              ('160', 'Broker:Message Undeliverable', '38', 'RoleName', 'sqlserver', 'broker_message_undeliverable', 'is_initiator', '', ''),
              ('160', 'Broker:Message Undeliverable', '52', 'BigintData1', 'sqlserver', 'broker_message_undeliverable', 'message_sequence_number', '', ''),
              ('160', 'Broker:Message Undeliverable', '53', 'BigintData2', 'sqlserver', 'broker_message_undeliverable', 'acknowledgement_sequence_number', '', ''),
              ('160', 'Broker:Message Undeliverable', '54', 'GUID', 'sqlserver', 'broker_message_undeliverable', 'conversation_id', '', ''),
              ('160', 'Broker:Message Undeliverable', '55', 'IntegerData2', 'sqlserver', 'broker_message_undeliverable', 'acknowledgement_fragment_number', '', ''),
              ('161', 'Broker:Corrupted Message', '1', 'TextData', 'sqlserver', 'broker_corrupted_message', 'corruption_description', '', ''),
              ('161', 'Broker:Corrupted Message', '20', 'Severity', 'sqlserver', 'broker_corrupted_message', 'error_severity', '', ''),
              ('161', 'Broker:Corrupted Message', '30', 'State', 'sqlserver', 'broker_corrupted_message', 'error_state', '', ''),
              ('162', 'User Error Message', '1', 'TextData', 'sqlserver', 'error_reported', 'message', '', ''),
              ('163', 'Broker:Activation', '1', 'TextData', 'sqlserver', 'broker_activation', 'activation_message', '', ''),
              ('163', 'Broker:Activation', '21', 'EventSubClass', 'sqlserver', 'broker_activation', 'activation_state', '', ''),
              ('163', 'Broker:Activation', '22', 'ObjectID', 'sqlserver', 'broker_activation', 'queue_id', '', ''),
              ('163', 'Broker:Activation', '25', 'IntegerData', 'sqlserver', 'broker_activation', 'active_task_count', '', ''),
              ('164', 'Object:Altered', '21', 'EventSubClass', 'sqlserver', 'object_altered', 'ddl_phase', '', ''),
              --('164', 'Object:Altered', '25', 'IntegerData', 'sqlserver', 'object_altered', '', 'package0', 'attach_activity_id'),
              ('164', 'Object:Altered', '28', 'ObjectType', 'sqlserver', 'object_altered', 'object_type', '', ''),
              ('164', 'Object:Altered', '56', 'ObjectID2', 'sqlserver', 'object_altered', 'related_object_id', '', ''),
              ('165', 'Performance statistics', '1', 'TextData', 'sqlserver', 'query_cache_removal_statistics', 'execution_statistics', '', ''),
              ('165', 'Performance statistics', '1', 'TextData', 'sqlserver', 'query_pre_execution_showplan', 'showplan_xml', '', ''),
              ('165', 'Performance statistics', '1', 'TextData', 'sqlserver', 'uncached_sql_batch_statistics', 'statement', '', ''),
              ('165', 'Performance statistics', '2', 'BinaryData', 'sqlserver', 'query_pre_execution_showplan', 'estimated_cost', '', ''),
              ('165', 'Performance statistics', '22', 'ObjectID', 'sqlserver', 'query_cache_removal_statistics', 'compiled_object_id', '', ''),
              ('165', 'Performance statistics', '25', 'IntegerData', 'sqlserver', 'query_cache_removal_statistics', 'begin_offset', '', ''),
              ('165', 'Performance statistics', '25', 'IntegerData', 'sqlserver', 'query_pre_execution_showplan', 'estimated_rows', '', ''),
              ('165', 'Performance statistics', '28', 'ObjectType', 'sqlserver', 'query_cache_removal_statistics', 'compiled_object_type', '', ''),
              ('165', 'Performance statistics', '28', 'ObjectType', 'sqlserver', 'query_pre_execution_showplan', 'object_type', '', ''),
              ('165', 'Performance statistics', '52', 'BigintData1', 'sqlserver', 'query_cache_removal_statistics', 'recompile_count', '', ''),
              ('165', 'Performance statistics', '55', 'IntegerData2', 'sqlserver', 'query_cache_removal_statistics', 'end_offset', '', ''),
              ('166', 'SQL:StmtRecompile', '1', 'TextData', 'sqlserver', 'sql_statement_recompile', 'statement', '', ''),
              ('166', 'SQL:StmtRecompile', '21', 'EventSubClass', 'sqlserver', 'sql_statement_recompile', 'recompile_cause', '', ''),
              ('166', 'SQL:StmtRecompile', '28', 'ObjectType', 'sqlserver', 'sql_statement_recompile', 'object_type', '', ''),
              ('166', 'SQL:StmtRecompile', '29', 'NestLevel', 'sqlserver', 'sql_statement_recompile', 'nest_level', '', ''),
              ('166', 'SQL:StmtRecompile', '55', 'IntegerData2', 'sqlserver', 'sql_statement_recompile', 'offset_end', '', ''),
              ('167', 'Database Mirroring State Change', '1', 'TextData', 'sqlserver', 'database_mirroring_state_change', 'state_change_desc', '', ''),
              ('167', 'Database Mirroring State Change', '25', 'IntegerData', 'sqlserver', 'database_mirroring_state_change', 'prior_state', '', ''),
              ('167', 'Database Mirroring State Change', '30', 'State', 'sqlserver', 'database_mirroring_state_change', 'new_state', '', ''),
              ('168', 'Showplan XML For Query Compile', '1', 'TextData', 'sqlserver', 'query_post_compilation_showplan', 'showplan_xml', '', ''),
              ('168', 'Showplan XML For Query Compile', '2', 'BinaryData', 'sqlserver', 'query_post_compilation_showplan', 'estimated_cost', '', ''),
              ('168', 'Showplan XML For Query Compile', '25', 'IntegerData', 'sqlserver', 'query_post_compilation_showplan', 'estimated_rows', '', ''),
              ('168', 'Showplan XML For Query Compile', '28', 'ObjectType', 'sqlserver', 'query_post_compilation_showplan', 'object_type', '', ''),
              ('168', 'Showplan XML For Query Compile', '29', 'NestLevel', 'sqlserver', 'query_post_compilation_showplan', 'nest_level', '', ''),
              ('169', 'Showplan All For Query Compile', '2', 'BinaryData', 'sqlserver', 'query_post_compilation_showplan', 'estimated_cost', '', ''),
              ('169', 'Showplan All For Query Compile', '25', 'IntegerData', 'sqlserver', 'query_post_compilation_showplan', 'estimated_rows', '', ''),
              ('169', 'Showplan All For Query Compile', '28', 'ObjectType', 'sqlserver', 'query_post_compilation_showplan', 'object_type', '', ''),
              ('169', 'Showplan All For Query Compile', '29', 'NestLevel', 'sqlserver', 'query_post_compilation_showplan', 'nest_level', '', ''),
              ('181', 'TM: Begin Tran starting', '1', 'TextData', 'sqlserver', 'begin_tran_starting', 'statement', '', ''),
              ('182', 'TM: Begin Tran completed', '1', 'TextData', 'sqlserver', 'begin_tran_completed', 'statement', '', ''),
              ('184', 'TM: Promote Tran completed', '2', 'BinaryData', 'sqlserver', 'promote_tran_completed', 'dtc_trasaction_token', '', ''),
              ('185', 'TM: Commit Tran starting', '1', 'TextData', 'sqlserver', 'commit_tran_starting', 'statement', '', ''),
              ('185', 'TM: Commit Tran starting', '21', 'EventSubClass', 'sqlserver', 'commit_tran_starting', 'new_transaction_started', '', ''),
              ('186', 'TM: Commit Tran completed', '1', 'TextData', 'sqlserver', 'commit_tran_completed', 'statement', '', ''),
              ('186', 'TM: Commit Tran completed', '21', 'EventSubClass', 'sqlserver', 'commit_tran_completed', 'new_transaction_started', '', ''),
              ('187', 'TM: Rollback Tran starting', '1', 'TextData', 'sqlserver', 'rollback_tran_starting', 'statement', '', ''),
              ('187', 'TM: Rollback Tran starting', '21', 'EventSubClass', 'sqlserver', 'rollback_tran_starting', 'new_transaction_started', '', ''),
              ('188', 'TM: Rollback Tran completed', '1', 'TextData', 'sqlserver', 'rollback_tran_completed', 'statement', '', ''),
              ('188', 'TM: Rollback Tran completed', '21', 'EventSubClass', 'sqlserver', 'rollback_tran_completed', 'new_transaction_started', '', ''),
              ('189', 'Lock:Timeout (timeout > 0)', '1', 'TextData', 'sqlserver', 'lock_timeout_greater_than_0', 'resource_description', '', ''),
              ('189', 'Lock:Timeout (timeout > 0)', '2', 'BinaryData', 'sqlserver', 'lock_timeout_greater_than_0', 'lockspace_workspace_id', '', ''),
              ('189', 'Lock:Timeout (timeout > 0)', '56', 'ObjectID2', 'sqlserver', 'lock_timeout_greater_than_0', 'associated_object_id', '', ''),
              ('189', 'Lock:Timeout (timeout > 0)', '57', 'Type', 'sqlserver', 'lock_timeout_greater_than_0', 'resource_type', '', ''),
              ('189', 'Lock:Timeout (timeout > 0)', '58', 'OwnerID', 'sqlserver', 'lock_timeout_greater_than_0', 'owner_type', '', ''),
              ('190', 'Progress Report: Online Index Operation', '21', 'EventSubClass', 'sqlserver', 'progress_report_online_index_operation', 'build_stage', '', ''),
              ('190', 'Progress Report: Online Index Operation', '52', 'BigintData1', 'sqlserver', 'progress_report_online_index_operation', 'rows_inserted', '', ''),
              ('190', 'Progress Report: Online Index Operation', '53', 'BigintData2', 'sqlserver', 'progress_report_online_index_operation', 'parallel_process_thread_id', '', ''),
              ('191', 'TM: Save Tran starting', '1', 'TextData', 'sqlserver', 'save_tran_starting', 'statement', '', ''),
              ('192', 'TM: Save Tran completed', '1', 'TextData', 'sqlserver', 'save_tran_completed', 'statement', '', ''),
              ('193', 'Background Job Error', '20', 'Severity', 'sqlserver', 'background_job_error', 'error_severity', '', ''),
              ('193', 'Background Job Error', '21', 'EventSubClass', 'sqlserver', 'background_job_error', 'job_failure_type', '', ''),
              ('193', 'Background Job Error', '25', 'IntegerData', 'sqlserver', 'background_job_error', 'retries', '', ''),
              ('193', 'Background Job Error', '30', 'State', 'sqlserver', 'background_job_error', 'error_state', '', ''),
              ('193', 'Background Job Error', '55', 'IntegerData2', 'sqlserver', 'background_job_error', 'job_id', '', ''),
              ('193', 'Background Job Error', '57', 'Type', 'sqlserver', 'background_job_error', 'job_type', '', ''),
              ('194', 'OLEDB Provider Information', '1', 'TextData', 'sqlserver', 'oledb_provider_information', 'parameters', '', ''),
              ('194', 'OLEDB Provider Information', '45', 'LinkedServerName', 'sqlserver', 'oledb_provider_information', 'linked_server_name', '', ''),
              ('194', 'OLEDB Provider Information', '46', 'ProviderName', 'sqlserver', 'oledb_provider_information', 'provider_name', '', ''),
              ('196', 'Assembly Load', '1', 'TextData', 'sqlserver', 'assembly_load', 'success', '', ''),
              ('196', 'Assembly Load', '22', 'ObjectID', 'sqlserver', 'assembly_load', 'assembly_id', '', ''),
              ('196', 'Assembly Load', '34', 'ObjectName', 'sqlserver', 'assembly_load', 'assembly_name', '', ''),
              ('198', 'XQuery Static Type', '1', 'TextData', 'sqlserver', 'xquery_static_type', 'inferred_type', '', ''),
              ('198', 'XQuery Static Type', '47', 'MethodName', 'sqlserver', 'xquery_static_type', 'oledb_method', '', ''),
              ('199', 'QN: Subscription', '1', 'TextData', 'sqlserver', 'qn_subscription', 'query_notification_xml_information', '', ''),
              ('199', 'QN: Subscription', '21', 'EventSubClass', 'sqlserver', 'qn_subscription', 'activity', '', ''),
              ('200', 'QN: Parameter table', '1', 'TextData', 'sqlserver', 'qn_parameter_table', 'query_notification_xml_information', '', ''),
              ('200', 'QN: Parameter table', '21', 'EventSubClass', 'sqlserver', 'qn_parameter_table', 'activity', '', ''),
              ('201', 'QN: Template', '1', 'TextData', 'sqlserver', 'qn_template', 'query_notification_xml_information', '', ''),
              ('201', 'QN: Template', '21', 'EventSubClass', 'sqlserver', 'qn_template', 'activity', '', ''),
              ('202', 'QN: Dynamics', '1', 'TextData', 'sqlserver', 'qn_dynamics', 'query_notification_xml_information', '', ''),
              ('202', 'QN: Dynamics', '21', 'EventSubClass', 'sqlserver', 'qn_dynamics', 'activity', '', ''),
              ('212', 'Bitmap Warning', '22', 'ObjectID', 'sqlserver', 'bitmap_disabled_warning', 'query_operation_node_id', '', ''),
              ('213', 'Database Suspect Data Page', '31', 'Error', 'sqlserver', 'database_suspect_data_page', 'page_error', '', ''),
              ('214', 'CPU threshold exceeded', '58', 'OwnerID', 'sqlserver', 'cpu_threshold_exceeded', 'session_id', '', ''),
              ('215', 'PreConnect:Starting', '21', 'EventSubClass', 'sqlserver', 'preconnect_starting', 'preconnect_type', '', ''),
              ('215', 'PreConnect:Starting', '28', 'ObjectType', 'sqlserver', 'preconnect_starting', 'object_type', '', ''),
              ('216', 'PreConnect:Completed', '21', 'EventSubClass', 'sqlserver', 'preconnect_completed', 'preconnect_type', '', ''),
              ('216', 'PreConnect:Completed', '28', 'ObjectType', 'sqlserver', 'preconnect_completed', 'object_type', '', ''),
              ('216', 'PreConnect:Completed', '30', 'State', 'sqlserver', 'preconnect_completed', 'error_state', '', ''),
              ('216', 'PreConnect:Completed', '39', 'TargetUserName', 'sqlserver', 'preconnect_completed', 'workload_group_name', '', '')
) AS tab (trace_event_id, trace_event_name, trace_column_id, trace_column_name, event_package_name, xe_event_name, column_name, action_package_name, xe_action_name)

-- Create table variable to hold the trace definition
DECLARE @TraceInfo TABLE
(
       eventid INT,
       te_name NVARCHAR(128) COLLATE SQL_Latin1_General_CP1_CI_AS,
       columnid INT,
       columnname NVARCHAR(128) COLLATE SQL_Latin1_General_CP1_CI_AS,
       event_package_name NVARCHAR(128) COLLATE SQL_Latin1_General_CP1_CI_AS,
       xe_event_name NVARCHAR(128) COLLATE SQL_Latin1_General_CP1_CI_AS,
       column_name NVARCHAR(128) COLLATE SQL_Latin1_General_CP1_CI_AS,
       action_package_name NVARCHAR(128) COLLATE SQL_Latin1_General_CP1_CI_AS,
       xe_action_name NVARCHAR(128) COLLATE SQL_Latin1_General_CP1_CI_AS,
       filter_operator NVARCHAR(128) COLLATE SQL_Latin1_General_CP1_CI_AS,
       filter_value sql_variant 
)

-- Query the trace functions to get the trace definition 
INSERT INTO @TraceInfo 
       (eventid, te_name, columnid, columnname, event_package_name, xe_event_name, 
        column_name, action_package_name, xe_action_name, filter_operator, filter_value)
SELECT 
       eventid,
       te.name,
       tgei.columnid,
       tc.name,
       event_package_name,
       xe_event_name,
       column_name,
       action_package_name,
       xe_action_name,
       CASE comparison_operator
              WHEN 0 THEN '='
              WHEN 1 THEN '<>'
              WHEN 2 THEN '>'
              WHEN 3 THEN '<'
              WHEN 4 THEN '>='
              WHEN 5 THEN '<='
              WHEN 6 THEN 'LIKE'
              WHEN 7 THEN 'NOT LIKE'
       END AS filter_operator,
       value AS filter_value
FROM sys.fn_trace_geteventinfo(@TraceID) AS tgei
LEFT JOIN sys.fn_trace_getfilterinfo(@TraceID) AS tfgi
       ON tgei.columnid = tfgi.columnid
              AND CAST(value AS NVARCHAR) NOT LIKE 'SQL Server Profiler%'
JOIN sys.trace_columns AS tc
       ON tgei.columnid = tc.trace_column_id
JOIN sys.trace_events AS te
       ON tgei.eventid = te.trace_event_id
LEFT JOIN [#SQLskills_Trace_XE_Column_Map] AS txcm
       ON tgei.eventid = txcm.trace_event_id
              AND tgei.columnid = txcm.trace_column_id
ORDER BY tgei.eventid, tgei.columnid

-- Generate the drop command for the Event Session if it already exists
DECLARE @DropCmd NVARCHAR(MAX) = 'IF EXISTS (SELECT 1 FROM sys.server_event_sessions WHERE name = '''+@SessionName+''')' + CHAR(10) +
'      DROP EVENT SESSION '+QUOTENAME(@SessionName)+' ON SERVER;' + CHAR(10)

-- Execute the drop command if @Execute = 1
IF @Execute = 1
       EXECUTE(@DropCmd);

-- Generate the start of the create statement for the Event Sesssion
DECLARE @sqlcmd NVARCHAR(MAX) = 'CREATE EVENT SESSION '+QUOTENAME(@SessionName)+ CHAR(10) +
'ON SERVER' + CHAR(10)

DECLARE @event_list NVARCHAR(MAX) = ''

-- Generate the Event list DDL definition for the event session
SELECT @event_list = @event_list + 
-- Add Events to Session
       CASE 
              WHEN event_package_name IS NULL 
                     THEN '/* ' + tab.te_name + ' is not implemented in Extended Events it may be a Server Audit Event */' + CHAR(10)
              WHEN event_package_name IS NOT NULL AND RowID <> 1
                     THEN '/* ' + tab.te_name + ' is implemented as the ' + tab.event_package_name + '.' + tab.xe_event_name + ' event in Extended Events */' + CHAR(10)
              ELSE
                     'ADD EVENT ' + event_package_name + '.' + xe_event_name + '(' + CHAR(10) +
                           -- Determine whether to create an Action List for Event
                           CASE 
                                  WHEN NOT EXISTS (SELECT 1
                                                                     FROM @TraceInfo AS ti
                                                                     WHERE ti.eventid = tab.eventid
                                                                       AND column_name IS NULL)
                                         OR RowID <> 1
                                         THEN ''
                                  ELSE 
                                         -- Build Action List for Event
                                         CHAR(9) + 'ACTION ' + CHAR(10) +
                                         CHAR(9) + '(' + CHAR(10) +
                                         STUFF((
                                                       SELECT 
                                                              CASE 
                                                                     WHEN action_package_name IS NULL AND columnname NOT IN ('StartTime', 'EndTime')
                                                                           THEN CHAR(9) + CHAR(9) + CHAR(9) + '-- ' + columnname + ' not implemented in XE for this event' + CHAR(10)
                                                                     WHEN num > 1 THEN  CHAR(9) + CHAR(9) + CHAR(9) + '-- ' + columnname + ' implemented by another Action in XE already' + CHAR(10)
                                                                     ELSE CHAR(9) + CHAR(9) + CHAR(9) + ', '+ action_package_name + '.' + xe_action_name  + CHAR(9) + '-- ' + columnname + ' from SQLTrace' + CHAR(10)
                                                              END
                                                       FROM (
                                                              SELECT eventid, action_package_name, xe_action_name, columnname, column_name, row_number() over (partition by eventid, action_package_name, xe_action_name order by columnname) AS num
                                                              FROM @TraceInfo AS ti
                                                              ) AS ti
                                                       WHERE ti.eventid = tab.eventid
                                                         AND column_name IS NULL
                                                       ORDER BY CASE WHEN xe_action_name IS NULL THEN 1 ELSE 0 END, xe_action_name
                                                       FOR XML PATH('')), 1, 4, CHAR(9) + CHAR(9) + CHAR(9)+' ') -- Actions
                                         + CHAR(9) + ')' + CHAR(10) 
                           END +
                     -- Build in Predicate information
                           CASE 
                                  WHEN NOT EXISTS (SELECT 1
                                                                     FROM @TraceInfo AS ti
                                                                     WHERE ti.eventid = tab.eventid
                                                                       AND filter_operator IS NOT NULL)
                                         THEN ''
                                  ELSE 
                                         CHAR(9) + 'WHERE ' + CHAR(10) +
                                         CHAR(9) + '(' + CHAR(10) +
                                         REPLACE(
                                                REPLACE(
                                                       STUFF(
                                                                     (
                                                                           SELECT 
                                                                                  CASE 
                                                                                         WHEN action_package_name IS NULL 
                                                                                                THEN CHAR(9) + CHAR(9) + CHAR(9) + 'AND ' + column_name + ' ' + filter_operator + ' ' + 
                                                                                                       CASE 
                                                                                                              WHEN SQL_VARIANT_PROPERTY(filter_value, 'BaseType') IN ('nvarchar', 'varchar', 'char', 'nchar') 
                                                                                                                     THEN '''%'+CAST(filter_value AS NVARCHAR)+'%'''
                                                                                                              ELSE CAST(filter_value AS NVARCHAR)
                                                                                                       END + CHAR(10)
                                                                                         ELSE CHAR(9) + CHAR(9) + CHAR(9) + 'AND '+ action_package_name + '.' + xe_action_name + ' ' + filter_operator + ' ' + 
                                                                                                       CASE 
                                                                                                              WHEN SQL_VARIANT_PROPERTY(filter_value, 'BaseType') IN ('nvarchar', 'varchar', 'char', 'nchar') 
                                                                                                                     THEN '''%'+CAST(filter_value AS NVARCHAR)+'%'''
                                                                                                              ELSE CAST(filter_value AS NVARCHAR)
                                                                                                       END + CHAR(10)
                                                                                  END
                                                                           FROM @TraceInfo AS ti
                                                                           WHERE ti.eventid = tab.eventid
                                                                             AND filter_operator IS NOT NULL
                                                                           ORDER BY xe_action_name
                                                                           FOR XML PATH('')
                                                                     ), 1, 7, CHAR(9) + CHAR(9) + CHAR(9)+'')
                                                              , '&gt;', '>')
                                                       , '&lt;', '<') -- Predicates
                                         + CHAR(9) + ')' 
                           END 
              + CHAR(10) + '),' + CHAR(10)
       END
FROM
(      
       SELECT eventid, te_name, event_package_name, xe_event_name, ROW_NUMBER() OVER (PARTITION BY event_package_name, xe_event_name ORDER BY eventid) AS RowID
       FROM
       (
              SELECT DISTINCT eventid, te_name, event_package_name, xe_event_name, ROW_NUMBER() OVER (PARTITION BY eventid ORDER BY event_package_name DESC) AS Row_ID
              FROM @TraceInfo
       ) AS tab2
       WHERE Row_ID = 1
) AS tab;

-- Add Event List to the output command
SET @sqlcmd = @sqlcmd + SUBSTRING(@event_list, 0, LEN(@event_list)-1)+CHAR(10)

-- Add target definitions to the output command based on trace configuration
SELECT @sqlcmd = @sqlcmd + 
CASE 
       WHEN path IS NULL THEN 'ADD TARGET package0.ring_buffer' + CHAR(10)
       ELSE 
'ADD TARGET package0.event_file' + CHAR(10) +
'(' + CHAR(10) +
'      SET filename = '''+ SUBSTRING(path, 0, LEN(path)-CHARINDEX('\', REVERSE(path))+1) + '\'+@SessionName+'.xel'',' + CHAR(10) +
'             max_file_size = ' + CAST(max_size AS NVARCHAR) + ',' + CHAR(10) +
'             max_rollover_files = ' + CAST(max_files AS NVARCHAR) + CHAR(10) +
')' + CHAR(10) 
END
FROM sys.traces   
WHERE id = @TraceID

-- Print the DDL for the Event Session
IF @PrintOutput = 1
BEGIN
       DECLARE @Position INT = 1, 
                     @Next INT = 0, 
                     @Delimeter NCHAR(1) = CHAR(10),
                     @WorkString VARCHAR(MAX) = @DropCmd + 'GO' + CHAR(10) + @sqlcmd;

       WHILE (1 = 1)
       BEGIN
              SELECT @Next = CHARINDEX(@Delimeter, @WorkString, @Position)

              IF (@Next = 0) 
                     BREAK

              IF (@Position <> @Next)
                     SELECT SUBSTRING(@WorkString, @Position, @Next - @Position) as SqlString

              SELECT @Position = @Next + 1
    END
END
DROP TABLE [#SQLskills_Trace_XE_Column_Map]

tools\dbatools\bin\XEtemplates\Query Batch Detail Sampling.xml

<event_sessions xmlns="http://schemas.microsoft.com/sqlserver/2008/07/extendedeventconfig">
  <event_session name="Query Batch Detail Sampling" maxMemory="4" eventRetentionMode="allowSingleEventLoss" trackCausality="true" dispatchLatency="30" maxEventSize="0" memoryPartitionMode="none">
    <templateCategory>
      <!-- _locID_text="templateCategory" _locComment = "" -->Query Execution</templateCategory>
    <templateName>
      <!-- _locID_text = "templateName" _locComment = "" -->Query Batch Detail Sampling</templateName>
    <templateDescription>
      <!-- _locID_text = "templateDescription" _locComment = "" -->Collects batch and RPC level statements as well as error information. You can use this template to understand the flow of queries that are executing on your system and track errors back to the queries that caused them. Events are only collected from 20% of the active sessions on the server at any given time. You can change the sampling rate by modifying the filter for the event session.</templateDescription>
    <event package="sqlserver" name="error_reported">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="query_hash" />
      <action package="sqlserver" name="session_id" />
      <predicate>
        <and>
          <and>
            <leaf>
              <comparator name="divides_by_uint64" package="package0"></comparator>
              <global name="session_id" package="sqlserver"></global>
              <value>5</value>
            </leaf>
            <leaf>
              <comparator name="greater_than_uint64" package="package0"></comparator>
              <global name="database_id" package="sqlserver"></global>
              <value>4</value>
            </leaf>
          </and>
          <leaf>
            <comparator name="equal_boolean" package="package0"></comparator>
            <global name="is_system" package="sqlserver"></global>
            <value>false</value>
          </leaf>
        </and>
      </predicate>
    </event>
    <event package="sqlserver" name="rpc_completed">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="query_hash" />
      <action package="sqlserver" name="session_id" />
      <predicate>
        <and>
          <and>
            <leaf>
              <comparator name="divides_by_uint64" package="package0"></comparator>
              <global name="session_id" package="sqlserver"></global>
              <value>5</value>
            </leaf>
            <leaf>
              <comparator name="greater_than_uint64" package="package0"></comparator>
              <global name="database_id" package="sqlserver"></global>
              <value>4</value>
            </leaf>
          </and>
          <leaf>
            <comparator name="equal_boolean" package="package0"></comparator>
            <global name="is_system" package="sqlserver"></global>
            <value>false</value>
          </leaf>
        </and>
      </predicate>
    </event>
    <event package="sqlserver" name="sql_batch_completed">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="query_hash" />
      <action package="sqlserver" name="session_id" />
      <predicate>
        <and>
          <and>
            <leaf>
              <comparator name="divides_by_uint64" package="package0"></comparator>
              <global name="session_id" package="sqlserver"></global>
              <value>5</value>
            </leaf>
            <leaf>
              <comparator name="greater_than_uint64" package="package0"></comparator>
              <global name="database_id" package="sqlserver"></global>
              <value>4</value>
            </leaf>
          </and>
          <leaf>
            <comparator name="equal_boolean" package="package0"></comparator>
            <global name="is_system" package="sqlserver"></global>
            <value>false</value>
          </leaf>
        </and>
      </predicate>
    </event>
    <target package="package0" name="ring_buffer" />
  </event_session>
</event_sessions>

tools\dbatools\bin\XEtemplates\Activity Tracking.xml

<event_sessions xmlns="http://schemas.microsoft.com/sqlserver/2008/07/extendedeventconfig">
  <event_session name="Activity Tracking" maxMemory="4" eventRetentionMode="allowSingleEventLoss" trackCausality="true" dispatchLatency="30" maxEventSize="0" memoryPartitionMode="none">
    <templateCategory>
      <!-- _locID_text="templateCategory" _locComment = "" -->System Monitoring</templateCategory>
    <templateName>
      <!-- _locID_text = "templateName" _locComment = "" -->Activity Tracking</templateName>
    <templateDescription>
      <!-- _locID_text = "templateDescription" _locComment = "" -->Similar to the 'Default Trace' that exists in the SQL Trace system. Use this template to track general activity on your system. The difference between this template and the 'Default Trace' is that this template does not include security audit events. If you would like to audit your system you should use the SQL Server Audit feature.</templateDescription>
    <event package="sqlserver" name="error_reported">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_hostname" />
      <action package="sqlserver" name="client_pid" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="database_name" />
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="username" />
      <action package="sqlserver" name="request_id" />
      <action package="sqlserver" name="session_id" />
      <action package="sqlserver" name="transaction_id" />
      <predicate>
        <or>
          <or>
            <or>
              <or>
                <leaf>
                  <comparator name="equal_int64" package="package0"></comparator>
                  <event name="error_reported" package="sqlserver" field="error_number"></event>
                  <value>8957</value>
                </leaf>
                <leaf>
                  <comparator name="equal_int64" package="package0"></comparator>
                  <event name="error_reported" package="sqlserver" field="error_number"></event>
                  <value>17550</value>
                </leaf>
              </or>
              <leaf>
                <comparator name="equal_int64" package="package0"></comparator>
                <event name="error_reported" package="sqlserver" field="error_number"></event>
                <value>17551</value>
              </leaf>
            </or>
            <leaf>
              <comparator name="equal_int64" package="package0"></comparator>
              <event name="error_reported" package="sqlserver" field="error_number"></event>
              <value>15457</value>
            </leaf>
          </or>
          <leaf>
            <comparator name="greater_than_int64" package="package0"></comparator>
            <event name="error_reported" package="sqlserver" field="severity"></event>
            <value>18</value>
          </leaf>
        </or>
      </predicate>
    </event>
    <event package="sqlserver" name="full_text_crawl_started">
      <action package="sqlserver" name="database_id" />
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="session_id" />
      <action package="sqlserver" name="transaction_id" />
    </event>
    <event package="sqlserver" name="fulltextlog_written">
      <action package="sqlserver" name="database_id" />
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="session_id" />
      <action package="sqlserver" name="transaction_id" />
    </event>
    <event package="sqlserver" name="hash_warning">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_hostname" />
      <action package="sqlserver" name="client_pid" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="database_name" />
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="username" />
      <action package="sqlserver" name="request_id" />
      <action package="sqlserver" name="session_id" />
      <action package="sqlserver" name="transaction_id" />

    </event>
    <event package="sqlserver" name="missing_column_statistics">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_hostname" />
      <action package="sqlserver" name="client_pid" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="database_name" />
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="username" />
      <action package="sqlserver" name="request_id" />
      <action package="sqlserver" name="session_id" />
      <action package="sqlserver" name="transaction_id" />

    </event>
    <event package="sqlserver" name="missing_join_predicate">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_hostname" />
      <action package="sqlserver" name="client_pid" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="database_name" />
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="username" />
      <action package="sqlserver" name="request_id" />
      <action package="sqlserver" name="session_id" />
      <action package="sqlserver" name="transaction_id" />
    </event>
    <event package="sqlserver" name="object_altered">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_hostname" />
      <action package="sqlserver" name="client_pid" />
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="username" />
      <action package="sqlserver" name="request_id" />
      <action package="sqlserver" name="session_id" />
      <parameter name="collect_database_name" value="1" />
      <predicate>
        <or>
          <leaf>
            <comparator name="not_equal_uint64" package="package0"></comparator>
            <event name="object_altered" package="sqlserver" field="database_id"></event>
            <value>2</value>
          </leaf>
          <and>
            <leaf>
              <comparator name="greater_than_int64" package="package0"></comparator>
              <event name="object_altered" package="sqlserver" field="object_id"></event>
              <value>0</value>
            </leaf>
            <not>
              <leaf>
                <comparator name="like_i_sql_unicode_string" package="sqlserver"></comparator>
                <event name="object_altered" package="sqlserver" field="object_name"></event>
                <value><![CDATA[#%]]></value>
              </leaf>
            </not>
          </and>
        </or>
      </predicate>
    </event>
    <event package="sqlserver" name="object_created">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_hostname" />
      <action package="sqlserver" name="client_pid" />
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="username" />
      <action package="sqlserver" name="request_id" />
      <action package="sqlserver" name="session_id" />

      <parameter name="collect_database_name" value="1" />
      <predicate>
        <or>
          <leaf>
            <comparator name="not_equal_uint64" package="package0"></comparator>
            <event name="object_created" package="sqlserver" field="database_id"></event>
            <value>2</value>
          </leaf>
          <and>
            <leaf>
              <comparator name="greater_than_int64" package="package0"></comparator>
              <event name="object_created" package="sqlserver" field="object_id"></event>
              <value>0</value>
            </leaf>
            <not>
              <leaf>
                <comparator name="like_i_sql_unicode_string" package="sqlserver"></comparator>
                <event name="object_created" package="sqlserver" field="object_name"></event>
                <value><![CDATA[#%]]></value>
              </leaf>
            </not>
          </and>
        </or>
      </predicate>
    </event>
    <event package="sqlserver" name="object_deleted">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_hostname" />
      <action package="sqlserver" name="client_pid" />
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="username" />
      <action package="sqlserver" name="request_id" />
      <action package="sqlserver" name="session_id" />
      <parameter name="collect_database_name" value="1" />
      <predicate>
        <or>
          <leaf>
            <comparator name="not_equal_uint64" package="package0"></comparator>
            <event name="object_deleted" package="sqlserver" field="database_id"></event>
            <value>2</value>
          </leaf>
          <and>
            <leaf>
              <comparator name="greater_than_int64" package="package0"></comparator>
              <event name="object_deleted" package="sqlserver" field="object_id"></event>
              <value>0</value>
            </leaf>
            <not>
              <leaf>
                <comparator name="like_i_sql_unicode_string" package="sqlserver"></comparator>
                <event name="object_deleted" package="sqlserver" field="object_name"></event>
                <value><![CDATA[#%]]></value>
              </leaf>
            </not>
          </and>
        </or>
      </predicate>
    </event>
    <event package="sqlserver" name="sort_warning">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_hostname" />
      <action package="sqlserver" name="client_pid" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="database_name" />
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="username" />
      <action package="sqlserver" name="request_id" />
      <action package="sqlserver" name="session_id" />
      <action package="sqlserver" name="transaction_id" />
    </event>
  </event_session>
</event_sessions>

tools\dbatools\bin\XEtemplates\Blocked Process Report.xml

<event_sessions xmlns="http://schemas.microsoft.com/sqlserver/2008/07/extendedeventsconfig">
   <event_session name="Blocked Process Report" maxMemory="8" eventRetentionMode="allowSingleEventLoss" trackCausality="false" dispatchLatency="30" maxEventSize="0" memoryPartitionMode="none">
    <templateCategory>
      <!-- _locID_text="templateCategory" _locComment = "" -->System Monitoring</templateCategory>
    <templateName>
      <!-- _locID_text = "templateName" _locComment = "" -->Blocked Process Report</templateName>
    <templateDescription>
      <!-- _locID_text = "templateDescription" _locComment = "" -->Captures the blocked process report. In order to capture a blocked process report, you must have the blocked process threshold system configuration option enabled (To capture blocking processes, configure blocked threshold (Set-DbaSpConfigure -SqlInstance sql2017 -ConfigName BlockedProcessThreshold -Value 5). </templateDescription>
      <event package="sqlserver" name="blocked_process_report" />
      <target package="package0" name="event_file">
         <parameter name="filename" value="Blocked Process Report" />
      </target>
   </event_session>
</event_sessions>

tools\dbatools\bin\XEtemplates\Deprecated Feature Usage.xml

<event_sessions xmlns="http://schemas.microsoft.com/sqlserver/2008/07/extendedeventconfig">
   <event_session name="Deprecated Feature Usage" maxMemory="4" eventRetentionMode="allowSingleEventLoss" trackCausality="true" dispatchLatency="30" maxEventSize="0" memoryPartitionMode="none">
    <templateCategory>
      <!-- _locID_text="templateCategory" _locComment = "" -->Features</templateCategory>
    <templateName>
      <!-- _locID_text = "templateName" _locComment = "" -->Deprecated Feature Usage</templateName>
    <templateDescription>
      <!-- _locID_text = "templateDescription" _locComment = "" -->Tracks deprecated feature usage.</templateDescription>
      <event package="sqlserver" name="deprecation_announcement">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="client_hostname" />
         <action package="sqlserver" name="database_id" />
         <action package="sqlserver" name="nt_username" />
         <action package="sqlserver" name="session_id" />
         <action package="sqlserver" name="session_nt_username" />
         <action package="sqlserver" name="sql_text" />
         <action package="sqlserver" name="username" />
         <predicate>
            <and>
               <leaf>
                  <comparator name="greater_than_uint64" package="package0" />
                  <global name="database_id" package="sqlserver" />
                  <value>4</value>
               </leaf>
               <leaf>
                  <comparator name="not_equal_i_sql_unicode_string" package="sqlserver" />
                  <global name="client_app_name" package="sqlserver" />
                  <value><![CDATA[Microsoft SQL Server Management Studio - Transact-SQL IntelliSense]]></value>
               </leaf>
            </and>
         </predicate>
      </event>
      <event package="sqlserver" name="deprecation_final_support">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="client_hostname" />
         <action package="sqlserver" name="database_id" />
         <action package="sqlserver" name="nt_username" />
         <action package="sqlserver" name="session_id" />
         <action package="sqlserver" name="session_nt_username" />
         <action package="sqlserver" name="sql_text" />
         <action package="sqlserver" name="username" />
         <predicate>
            <and>
               <leaf>
                  <comparator name="greater_than_uint64" package="package0" />
                  <global name="database_id" package="sqlserver" />
                  <value>4</value>
               </leaf>
               <leaf>
                  <comparator name="not_equal_i_sql_unicode_string" package="sqlserver" />
                  <global name="client_app_name" package="sqlserver" />
                  <value><![CDATA[Microsoft SQL Server Management Studio - Transact-SQL IntelliSense]]></value>
               </leaf>
            </and>
         </predicate>
      </event>
      <target package="package0" name="event_file">
         <parameter name="filename" value="Deprecated Feature Usage" />
         <parameter name="max_rollover_files" value="25" />
      </target>
   </event_session>
</event_sessions>

tools\dbatools\bin\XEtemplates\Failing Queries.xml

<event_sessions xmlns="http://schemas.microsoft.com/sqlserver/2008/07/extendedeventsconfig">
   <event_session name="Failing Queries" maxMemory="4" eventRetentionMode="allowSingleEventLoss" trackCausality="false" dispatchLatency="30" maxEventSize="0" memoryPartitionMode="none">
    <templateCategory>
      <!-- _locID_text="templateCategory" _locComment = "" -->Query Execution</templateCategory>
    <templateName>
      <!-- _locID_text = "templateName" _locComment = "" -->Failing Queries</templateName>
    <templateDescription>
      <!-- _locID_text = "templateDescription" _locComment = "" -->Tracks failed queries.</templateDescription>   
	  <event package="sqlserver" name="error_reported">
         <action package="sqlserver" name="client_hostname" />
         <action package="sqlserver" name="database_id" />
         <action package="sqlserver" name="sql_text" />
         <action package="sqlserver" name="tsql_stack" />
         <action package="sqlserver" name="username" />
         <predicate>
            <leaf>
               <comparator name="greater_than_int64" package="package0" />
               <event name="error_reported" package="sqlserver" field="severity" />
               <value>10</value>
            </leaf>
         </predicate>
      </event>
   </event_session>
</event_sessions>

tools\dbatools\bin\XEtemplates\Function Executions.xml

<event_sessions xmlns="http://schemas.microsoft.com/sqlserver/2008/07/extendedeventconfig">
   <event_session name="Function Executions" maxMemory="4" eventRetentionMode="allowSingleEventLoss" trackCausality="false" dispatchLatency="30" maxEventSize="0" memoryPartitionMode="none">
    <templateCategory>
      <!-- _locID_text="templateCategory" _locComment = "" -->Everyday Extended Events</templateCategory>
    <templateName>
      <!-- _locID_text = "templateName" _locComment = "" -->Function Executions</templateName>
    <templateDescription>
      <!-- _locID_text = "templateDescription" _locComment = "" -->Use this to count the number of times a function is executed from a single SELECT statement.</templateDescription>
      <event package="sqlserver" name="sp_statement_completed">
         <action package="sqlserver" name="sql_text" />
         <action package="sqlserver" name="tsql_stack" />
      </event>
      <event package="sqlserver" name="sql_statement_completed">
         <action package="sqlserver" name="sql_text" />
         <action package="sqlserver" name="tsql_stack" />
      </event>
      <target package="package0" name="ring_buffer" />
   </event_session>
</event_sessions>

tools\dbatools\bin\XEtemplates\Index Page Splits.xml

<event_sessions xmlns="http://schemas.microsoft.com/sqlserver/2008/07/extendedeventconfig">
   <event_session name="Index Page Splits" maxMemory="4" eventRetentionMode="allowSingleEventLoss" trackCausality="false" dispatchLatency="30" maxEventSize="0" memoryPartitionMode="none">
    <templateCategory>
      <!-- _locID_text="templateCategory" _locComment = "" -->Everyday Extended Events</templateCategory>
    <templateName>
      <!-- _locID_text = "templateName" _locComment = "" -->Index Page Splits</templateName>
    <templateDescription>
      <!-- _locID_text = "templateDescription" _locComment = "" -->See index page splits in action.</templateDescription>
      <event package="sqlserver" name="page_split">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="client_hostname" />
         <action package="sqlserver" name="database_id" />
         <action package="sqlserver" name="database_name" />
         <action package="sqlserver" name="sql_text" />
      </event>
      <target package="package0" name="event_file">
         <parameter name="filename" value="page_splits" />
         <parameter name="max_rollover_files" value="0" />
      </target>
   </event_session>
</event_sessions>

tools\dbatools\bin\XEtemplates\Query Wait Statistics.xml

<event_sessions xmlns="http://schemas.microsoft.com/sqlserver/2008/07/extendedeventconfig">
   <event_session name="Query Wait Statistics" maxMemory="4" eventRetentionMode="allowSingleEventLoss" trackCausality="false" dispatchLatency="30" maxEventSize="0" memoryPartitionMode="none">
    <templateCategory>
      <!-- _locID_text="templateCategory" _locComment = "" -->Everyday Extended Events</templateCategory>
    <templateName>
      <!-- _locID_text = "templateName" _locComment = "" -->Query Wait Statistics</templateName>
    <templateDescription>
      <!-- _locID_text = "templateDescription" _locComment = "" -->Tracks internal and external wait statistics.</templateDescription>
      <event package="sqlos" name="wait_completed">
         <action package="sqlserver" name="database_id" />
         <action package="sqlserver" name="database_name" />
         <action package="sqlserver" name="is_system" />
         <action package="sqlserver" name="session_id" />
         <parameter name="collect_wait_resource" value="1" />
         <predicate>
            <and>
               <leaf>
                  <comparator name="greater_than_uint64" package="package0" />
                  <global name="database_id" package="sqlserver" />
                  <value>4</value>
               </leaf>
               <leaf>
                  <comparator name="not_equal_boolean" package="package0" />
                  <global name="is_system" package="sqlserver" />
                  <value>false</value>
               </leaf>
            </and>
         </predicate>
      </event>
      <event package="sqlos" name="wait_info">
         <action package="sqlserver" name="database_id" />
         <action package="sqlserver" name="database_name" />
         <action package="sqlserver" name="is_system" />
         <action package="sqlserver" name="session_id" />
         <predicate>
            <and>
               <leaf>
                  <comparator name="greater_than_uint64" package="package0" />
                  <global name="database_id" package="sqlserver" />
                  <value>4</value>
               </leaf>
               <leaf>
                  <comparator name="not_equal_boolean" package="package0" />
                  <global name="is_system" package="sqlserver" />
                  <value>false</value>
               </leaf>
            </and>
         </predicate>
      </event>
      <event package="sqlos" name="wait_info_external">
         <action package="sqlserver" name="database_id" />
         <action package="sqlserver" name="database_name" />
         <action package="sqlserver" name="is_system" />
         <action package="sqlserver" name="session_id" />
         <predicate>
            <and>
               <leaf>
                  <comparator name="greater_than_uint64" package="package0" />
                  <global name="database_id" package="sqlserver" />
                  <value>4</value>
               </leaf>
               <leaf>
                  <comparator name="not_equal_boolean" package="package0" />
                  <global name="is_system" package="sqlserver" />
                  <value>false</value>
               </leaf>
            </and>
         </predicate>
      </event>
      <target package="package0" name="ring_buffer">
         <parameter name="max_memory" value="102400" />
      </target>
   </event_session>
</event_sessions>

tools\dbatools\bin\XEtemplates\Log File IO Detail Tracking.xml

<event_sessions xmlns="http://schemas.microsoft.com/sqlserver/2008/07/extendedeventconfig">
  <event_session name="Log File IO Detail Tracking" maxMemory="4" eventRetentionMode="allowSingleEventLoss" trackCausality="false" dispatchLatency="30" maxEventSize="0" memoryPartitionMode="none">
    <templateCategory>
      <!-- _locID_text="templateCategory" _locComment = "" -->System Monitoring</templateCategory>
    <templateName>
      <!-- _locID_text = "templateName" _locComment = "" -->Log File IO Detail Tracking</templateName>
    <templateDescription>
      <!-- _locID_text = "templateDescription" _locComment = "" -->Monitors the IO for database log files on a server by tracking asynchronous IO, database log flushes, file writes, spinlock backoffs of type LOGFLUSHQ and waits of type WRITELOG. This template collects data in two ways: raw data is collected to a ring buffer and spinlock backoff information is aggregated based on the input buffer (sql_text). The session is filtered for a single log file per database; if you have multiple log files you can modify the filter for the file_write_completed and file_written events to include more than just file_id = 2.</templateDescription>
    <event package="sqlos" name="async_io_completed" />
    <event package="sqlos" name="async_io_requested" />
    <event package="sqlos" name="spinlock_backoff">
      <action package="sqlserver" name="sql_text" />
      <predicate>
        <leaf>
          <comparator name="equal_uint64" package="package0"></comparator>
          <event name="spinlock_backoff" package="sqlos" field="type"></event>
          <value>85</value>
        </leaf>
      </predicate>
    </event>
    <event package="sqlos" name="wait_info">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="is_system" />
      <action package="sqlserver" name="session_id" />
      <predicate>
        <and>
          <leaf>
            <comparator name="equal_uint64" package="package0"></comparator>
            <event name="wait_info" package="sqlos" field="opcode"></event>
            <value>1</value>
          </leaf>
          <leaf>
            <comparator name="equal_uint64" package="package0"></comparator>
            <event name="wait_info" package="sqlos" field="wait_type"></event>
            <value>182</value>
          </leaf>
        </and>
      </predicate>
    </event>
    <event package="sqlserver" name="databases_log_flush" />
    <event package="sqlserver" name="file_write_completed">
      <parameter name="collect_path" value="1" />
      <predicate>
        <leaf>
          <comparator name="equal_uint64" package="package0"></comparator>
          <event name="file_write_completed" package="sqlserver" field="file_id"></event>
          <value>2</value>
        </leaf>
      </predicate>
    </event>
    <event package="sqlserver" name="file_written">
      <parameter name="collect_path" value="1" />
      <predicate>
        <leaf>
          <comparator name="equal_uint64" package="package0"></comparator>
          <event name="file_written" package="sqlserver" field="file_id"></event>
          <value>2</value>
        </leaf>
      </predicate>
    </event>
    <target package="package0" name="histogram">
      <parameter name="filtering_event_name" value="sqlos.spinlock_backoff" />
      <parameter name="source" value="sqlserver.sql_text" />
    </target>
    <target package="package0" name="ring_buffer" />
  </event_session>
</event_sessions>

tools\dbatools\bin\XEtemplates\Log File IO Tracking.xml

<event_sessions xmlns="http://schemas.microsoft.com/sqlserver/2008/07/extendedeventconfig">
  <event_session name="Log File IO Tracking" maxMemory="4" eventRetentionMode="allowSingleEventLoss" trackCausality="false" dispatchLatency="30" maxEventSize="0" memoryPartitionMode="none">
    <templateCategory>
      <!-- _locID_text="templateCategory" _locComment = "" -->System Monitoring</templateCategory>
    <templateName>
      <!-- _locID_text = "templateName" _locComment = "" -->Log File IO Tracking</templateName>
    <templateDescription>
      <!-- _locID_text = "templateDescription" _locComment = "" -->Monitors the IO for database log files by tracking waits of type WRITELOG.</templateDescription>
    <event package="sqlos" name="wait_info">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="session_id" />
      <predicate>
        <and>
          <leaf>
            <comparator name="equal_uint64" package="package0"></comparator>
            <event name="wait_info" package="sqlos" field="opcode"></event>
            <value>1</value>
          </leaf>
          <leaf>
            <comparator name="equal_uint64" package="package0"></comparator>
            <event name="wait_info" package="sqlos" field="wait_type"></event>
            <value>182</value>
          </leaf>
        </and>
      </predicate>
    </event>
    <target package="package0" name="ring_buffer" />
  </event_session>
</event_sessions>

tools\dbatools\bin\XEtemplates\Login Tracker.xml

<event_sessions xmlns="http://schemas.microsoft.com/sqlserver/2008/07/extendedeventsconfig">
   <event_session name="Login Tracker" maxMemory="4" eventRetentionMode="allowSingleEventLoss" trackCausality="false" dispatchLatency="1" maxEventSize="0" memoryPartitionMode="none">
       <templateCategory>
      <!-- _locID_text="templateCategory" _locComment = "" -->System Monitoring</templateCategory>
    <templateName>
      <!-- _locID_text = "templateName" _locComment = "" -->Login Tracker</templateName>
    <templateDescription>
      <!-- _locID_text = "templateDescription" _locComment = "" -->Monitors logins to databases</templateDescription>
      <event package="sqlserver" name="sql_statement_starting">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="client_hostname" />
         <action package="sqlserver" name="database_name" />
         <action package="sqlserver" name="server_instance_name" />
         <action package="sqlserver" name="server_principal_name" />
         <parameter name="collect_statement" value="0" />
         <predicate>
            <and>
               <and>
                  <and>
                     <leaf>
                        <comparator name="equal_boolean" package="package0" />
                        <global name="is_system" package="sqlserver" />
                        <value>false</value>
                     </leaf>
                     <not>
                        <leaf>
                           <comparator name="like_i_sql_unicode_string" package="sqlserver" />
                           <global name="client_app_name" package="sqlserver" />
                           <value><![CDATA[%dbatools%]]></value>
                        </leaf>
                     </not>
                  </and>
                  <not>
                     <leaf>
                        <comparator name="like_i_sql_unicode_string" package="sqlserver" />
                        <global name="client_app_name" package="sqlserver" />
                        <value><![CDATA[%management studio%]]></value>
                     </leaf>
                  </not>
               </and>
               <leaf>
                  <comparator name="not_equal_i_sql_unicode_string" package="sqlserver" />
                  <global name="database_name" package="sqlserver" />
                  <value><![CDATA[tempdb]]></value>
               </leaf>
            </and>
         </predicate>
      </event>
      <target package="package0" name="event_file">
         <parameter name="filename" value="Login Tracker" />
         <parameter name="max_file_size" value="10" />
      </target>
   </event_session>
</event_sessions>

tools\dbatools\bin\XEtemplates\Long Running Queries.xml

<event_sessions xmlns="http://schemas.microsoft.com/sqlserver/2008/07/extendedeventsconfig">
   <event_session name="Long Running Queries" maxMemory="4" eventRetentionMode="allowSingleEventLoss" trackCausality="true" dispatchLatency="30" maxEventSize="0" memoryPartitionMode="none">
    <templateCategory>
      <!-- _locID_text="templateCategory" _locComment = "" -->Query Execution</templateCategory>
    <templateName>
      <!-- _locID_text = "templateName" _locComment = "" -->Long Running Queries</templateName>
    <templateDescription>
      <!-- _locID_text = "templateDescription" _locComment = "" -->Tracks queries that take longer than 10 seconds to run.</templateDescription>
      <event package="sqlserver" name="rpc_completed">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="client_hostname" />
         <action package="sqlserver" name="database_id" />
         <action package="sqlserver" name="database_name" />
         <action package="sqlserver" name="nt_username" />
         <action package="sqlserver" name="query_hash" />
         <action package="sqlserver" name="server_principal_name" />
         <action package="sqlserver" name="session_id" />
         <action package="sqlserver" name="sql_text" />
         <predicate>
            <and>
               <and>
                  <leaf>
                     <comparator name="greater_than_uint64" package="package0" />
                     <global name="database_id" package="sqlserver" />
                     <value>4</value>
                  </leaf>
                  <leaf>
                     <comparator name="equal_boolean" package="package0" />
                     <global name="is_system" package="sqlserver" />
                     <value>false</value>
                  </leaf>
               </and>
               <leaf>
                  <comparator name="greater_than_equal_uint64" package="package0" />
                  <event name="rpc_completed" package="sqlserver" field="duration" />
                  <value>10000000</value>
               </leaf>
            </and>
         </predicate>
      </event>
      <event package="sqlserver" name="sql_batch_completed">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="database_id" />
         <action package="sqlserver" name="query_hash" />
         <action package="sqlserver" name="session_id" />
         <parameter name="collect_batch_text" value="1" />
         <predicate>
            <and>
               <and>
                  <leaf>
                     <comparator name="greater_than_uint64" package="package0" />
                     <global name="database_id" package="sqlserver" />
                     <value>4</value>
                  </leaf>
                  <leaf>
                     <comparator name="equal_boolean" package="package0" />
                     <global name="is_system" package="sqlserver" />
                     <value>false</value>
                  </leaf>
               </and>
               <leaf>
                  <comparator name="greater_than_equal_uint64" package="package0" />
                  <event name="sql_batch_completed" package="sqlserver" field="duration" />
                  <value>10000000</value>
               </leaf>
            </and>
         </predicate>
      </event>
      <target package="package0" name="event_file">
         <parameter name="filename" value="Long Running Queries" />
         <parameter name="max_file_size" value="100" />
      </target>
      <target package="package0" name="ring_buffer" />
   </event_session>
</event_sessions>

tools\dbatools\bin\XEtemplates\Overly Complex Queries.xml

<event_sessions xmlns="http://schemas.microsoft.com/sqlserver/2008/07/extendedeventsconfig">
   <event_session name="Overly Complex Queries" maxMemory="100" eventRetentionMode="allowSingleEventLoss" trackCausality="false" dispatchLatency="5" maxEventSize="0" memoryPartitionMode="none">
    <templateCategory>
      <!-- _locID_text="templateCategory" _locComment = "" -->Performance Store</templateCategory>
    <templateName>
      <!-- _locID_text = "templateName" _locComment = "" -->Overly Complex Queries</templateName>
    <templateDescription>
      <!-- _locID_text = "templateDescription" _locComment = "" -->Captures queries that report errors 16 and 8623. This generally means that the query was unnecessarily complex.</templateDescription>
      <event package="sqlserver" name="error_reported">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="client_hostname" />
         <action package="sqlserver" name="client_pid" />
         <action package="sqlserver" name="database_id" />
         <action package="sqlserver" name="database_name" />
         <action package="sqlserver" name="nt_username" />
         <action package="sqlserver" name="plan_handle" />
         <action package="sqlserver" name="session_id" />
         <action package="sqlserver" name="sql_text" />
         <action package="sqlserver" name="transaction_id" />
         <action package="sqlserver" name="tsql_frame" />
         <action package="sqlserver" name="username" />
         <predicate>
            <and>
               <leaf>
                  <comparator name="equal_int64" package="package0" />
                  <event name="error_reported" package="sqlserver" field="severity" />
                  <value>16</value>
               </leaf>
               <leaf>
                  <comparator name="equal_int64" package="package0" />
                  <event name="error_reported" package="sqlserver" field="error_number" />
                  <value>8623</value>
               </leaf>
            </and>
         </predicate>
      </event>
      <target package="package0" name="event_file">
         <parameter name="filename" value="Overly Complex Queries" />
         <parameter name="max_file_size" value="200" />
         <parameter name="max_rollover_files" value="5" />
         <parameter name="metadatafile" value=" Overly Complex Queries.xem" />
      </target>
   </event_session>
</event_sessions>

tools\dbatools\bin\XEtemplates\Profiler SP Counts.xml

<event_sessions xmlns="http://schemas.microsoft.com/sqlserver/2008/07/extendedeventconfig">
  <event_session name="Profiler SP Counts" maxMemory="4" eventRetentionMode="allowSingleEventLoss" trackCausality="true" dispatchLatency="30" maxEventSize="0" memoryPartitionMode="none">
    <templateCategory>
      <!-- _locID_text="templateCategory" _locComment = "" -->Profiler Equivalents</templateCategory>
    <templateName>
      <!-- _locID_text = "templateName" _locComment = "" -->Profiler SP Counts</templateName>
    <templateDescription>
      <!-- _locID_text = "templateDescription" _locComment = "" -->Matches the 'SP_Counts' template in Profiler. 	Captures stored procedure execution behavior over time. </templateDescription>
    <event package="sqlserver" name="module_start">
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="database_name" />
      <action package="sqlserver" name="server_instance_name" />
      <predicate>
        <and>
          <leaf>
            <comparator name="greater_than_uint64" package="package0"></comparator>
            <global name="database_id" package="sqlserver"></global>
            <value>4</value>
          </leaf>
          <leaf>
            <comparator name="equal_boolean" package="package0"></comparator>
            <global name="is_system" package="sqlserver"></global>
            <value>false</value>
          </leaf>
        </and>
      </predicate>
    </event>
  </event_session>
</event_sessions>

tools\dbatools\bin\XEtemplates\Profiler TSQL Locks.xml

<event_sessions xmlns="http://schemas.microsoft.com/sqlserver/2008/07/extendedeventconfig">
  <event_session name="Profiler TSQL Locks" maxMemory="4" eventRetentionMode="allowSingleEventLoss" trackCausality="true" dispatchLatency="30" maxEventSize="0" memoryPartitionMode="none">
    <templateCategory>
      <!-- _locID_text="templateCategory" _locComment = "" -->Profiler Equivalents</templateCategory>
    <templateName>
      <!-- _locID_text = "templateName" _locComment = "" -->Profiler TSQL Locks</templateName>
    <templateDescription>
      <!-- _locID_text = "templateDescription" _locComment = "" -->Matches the 'TSQL_Locks' template in Profiler. Captures all of the Transact-SQL statements that are submitted to SQL Server by clients along with exceptional lock events. Use to troubleshoot deadlocks, lock time-out, and lock escalation events. </templateDescription>
    <event package="sqlserver" name="blocked_process_report">
      <action package="sqlserver" name="session_id" />      
    </event>
    <event package="sqlserver" name="lock_cancel">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_pid" />
      <action package="sqlserver" name="database_name" />
      <action package="sqlserver" name="nt_username" />
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="session_id" />
    </event>
    <event package="sqlserver" name="lock_deadlock">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_pid" />
      <action package="sqlserver" name="database_name" />
      <action package="sqlserver" name="nt_username" />
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="session_id" />
    </event>
    <event package="sqlserver" name="lock_deadlock_chain">
      <action package="sqlserver" name="database_name" />
      <action package="sqlserver" name="session_id" />
    </event>
    <event package="sqlserver" name="lock_escalation">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_pid" />
      <action package="sqlserver" name="database_name" />
      <action package="sqlserver" name="nt_username" />
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="session_id" />
    </event>
    <event package="sqlserver" name="lock_timeout_greater_than_0">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_pid" />
      <action package="sqlserver" name="database_name" />
      <action package="sqlserver" name="nt_username" />
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="session_id" />
    </event>
    <event package="sqlserver" name="sp_statement_completed">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_pid" />
      <action package="sqlserver" name="database_name" />
      <action package="sqlserver" name="nt_username" />
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="session_id" />
      <parameter name="collect_statement" value="1" />
      <predicate>
        <and>
          <leaf>
            <comparator name="greater_than_uint64" package="package0"></comparator>
            <global name="database_id" package="sqlserver"></global>
            <value>4</value>
          </leaf>
          <leaf>
            <comparator name="equal_boolean" package="package0"></comparator>
            <global name="is_system" package="sqlserver"></global>
            <value>false</value>
          </leaf>
        </and>
      </predicate>
    </event>
    <event package="sqlserver" name="sp_statement_starting">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_pid" />
      <action package="sqlserver" name="database_name" />
      <action package="sqlserver" name="nt_username" />
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="session_id" />
      <parameter name="collect_statement" value="1" />
      <predicate>
        <and>
          <leaf>
            <comparator name="greater_than_uint64" package="package0"></comparator>
            <global name="database_id" package="sqlserver"></global>
            <value>4</value>
          </leaf>
          <leaf>
            <comparator name="equal_boolean" package="package0"></comparator>
            <global name="is_system" package="sqlserver"></global>
            <value>false</value>
          </leaf>
        </and>
      </predicate>
    </event>
    <event package="sqlserver" name="sql_statement_completed">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_pid" />
      <action package="sqlserver" name="database_name" />
      <action package="sqlserver" name="nt_username" />
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="session_id" />
      <predicate>
        <and>
          <leaf>
            <comparator name="greater_than_uint64" package="package0"></comparator>
            <global name="database_id" package="sqlserver"></global>
            <value>4</value>
          </leaf>
          <leaf>
            <comparator name="equal_boolean" package="package0"></comparator>
            <global name="is_system" package="sqlserver"></global>
            <value>false</value>
          </leaf>
        </and>
      </predicate>
    </event>   
    <event package="sqlserver" name="sql_statement_starting">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="query_hash" />
      <action package="sqlserver" name="query_plan_hash" />
      <action package="sqlserver" name="session_id" />
      <predicate>
        <and>
          <and>
            <leaf>
              <comparator name="divides_by_uint64" package="package0"></comparator>
              <global name="session_id" package="sqlserver"></global>
              <value>5</value>
            </leaf>
            <leaf>
              <comparator name="greater_than_uint64" package="package0"></comparator>
              <global name="database_id" package="sqlserver"></global>
              <value>4</value>
            </leaf>
          </and>
          <leaf>
            <comparator name="equal_boolean" package="package0"></comparator>
            <global name="is_system" package="sqlserver"></global>
            <value>false</value>
          </leaf>
        </and>
      </predicate>
    </event>
    <event package="sqlserver" name="xml_deadlock_report">
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="session_id" />
    </event>
  </event_session>
</event_sessions>

tools\dbatools\en-us\about_dbatools_support.help.txt

TOPIC
	about_dbatools_support
	
SHORT DESCRIPTION
	Describes how to contact support and what information we need
	
LONG DESCRIPTION
	Welcome to the dbatools support guide.
	If you are reading this, odds are, something went wrong and you are looking
	for support. Sorry for the inconvenience - we try our best to have dbatools
	as free of bugs as we can manage. Doesn't always work out.
	
	This article describes how you can reach us and what information we need
	when you do.
	
	
	#-------------------------------------------------------------------------#
	#                           Table of Contents                             #
	#-------------------------------------------------------------------------#

	- Getting Help
	- Troubleshooting Support
	- A matter of timing
	- What happens now?
	- The world need not burn
	
	
	#-------------------------------------------------------------------------#
	#                              Getting Help                               #
	#-------------------------------------------------------------------------#
	
	When something breaks unexpectedly, you'll probably want help. Well, most of
	us in the team work on dbatools, because we a) have fun coding and b) like
	the community (there is no pay involved whatsoever). So, come see us in our
	Slack channel or file an issue on github. We will gladly attempt to help you
	with any technical issues using our module (we love our module, we'll remove
	any malfunctioning blemishes that we can!).
	
	In order to find us, you can visit us on Slack by following this link:
	https://dbatools.io/slack/
	This has the advantage of the easiest interaction and often the fastest
	resolution times for smaller issues.
	
	Alternatively, you can file an issue on github:
	https://github.com/sqlcollaborative/dbatools/issues
	(Don't worry: It's relatively straightforward and easy to do)
	
	When you describe an error, please be prepared to provide some information,
	such as what code you were trying to execute and what the error was. For
	more details on this, see the next chapter: "Troubleshooting Support"
	
	
	#-------------------------------------------------------------------------#
	#                         Troubleshooting Support                         #
	#-------------------------------------------------------------------------#
	
	When trying to figure out, what went wrong, we usually need information,
	quite a bit of it, in fact. Usual information we care about:
	- Code/line you were running
	- Output / Error / Warning received
	- Exception contents
	- Execution log
	- PowerShell Version
	- Operating System
	Now, we rarely need all of that, but often we don't know what of it we need
	before looking at it in more detail. That said, I highly recommend providing
	the first three points immediately, as they are fast to gather and already
	help a lot. We may ask for more as it comes up.
	
	# Code/line you were running #
	#----------------------------#
	
	Literally the code you executed. Make it as simple as possible and still
	produce the error. Make sure to replace sensitive data before posting it.
	If you can reduce it to a single line, that's great! (But don't sweat it if
	it's still more)
	
	# Output / Error / Warning received #
	#-----------------------------------#
	
	Generally, we catch errors and write warnings by default. Report what it
	wrote if that is the case. Same for red exception textes. Sometimes however,
	a command may just refuse to do anything at all. In that case it might just
	return nothing. If it doesn't write a warning or throw an exception, tell us
	what you expected it to do and what it did instead.
	Screenshots work very well for this.
	
	# Exception Contents #
	#--------------------#
	
	If the code threw an exception or wrote a warning, behind the scenes some
	code failed to work as designed. This failure information is usually the
	most valuable piece of information for troubleshooting. Generally, you can
	see that exception content by running the following line:
	
	  $error[0] | Select *
	
	Directly after the command failed. Screenshot it.
	
	# Execution Log #
	#---------------#
	
	Dbatools logs a lot of information about how a function processes its logic.
	You can access that information by running Get-DbatoolsLog. In order to 
	send in this information, start a new process and produce the error, then
	execute the following line:
	
	  Get-DbatoolsLog | Export-Csv messagelog.csv
	
	This will export the entire log into a csv file. You may want to edit out
	confidential information (replace it with something harmles) before
	submitting it.
	
	# PowerShell Version #
	#--------------------#
	
	We try to support versions 3-5.1 of PowerShell. Sometimes however we mess up
	and something doesn't work on all versions. Thus the actual PowerShell
	version is often of interest. You can find this information by running the
	following line:
	
	  $PSVersionTable
	
	# Operating System #
	#------------------#
	
	What version of Windows are you running your code on?
	
	# Ugh, this is a bit much, can't you just gather what you need yourself?! #
	#-------------------------------------------------------------------------#
	
	Yes, we can! We've got a command that gathers all the data that it can and
	bundles it in a zip file for submission. Beware though: It is seriously hard
	to hide or redact data from it, as it gathers a lot and stores it in an XML
	file that must be edited from PowerShell, if at all. If you don't
	particularly worry about sharing the data though, simply run this command:
	
	  New-DbatoolsSupportPackage
	
	It'll handle the gathering. Just submit the resultant zip file and we have
	all the information your console has to give.
	
	
	#-------------------------------------------------------------------------#
	#                            A matter of timing                           #
	#-------------------------------------------------------------------------#
	
	When gathering information for an error, we highly recommend taking the
	following steps:
	
	- Start a new PowerShell console
	- Perform the action necessary to reproduce the error
	- Gather data
	
	This has two key benefits:
	- The least amount of data gets collected, meaning we have to search through
	  less material to find the cause.
	- Reduces the likelyhood of accidentally sharing confidential data
	
	
	#-------------------------------------------------------------------------#
	#                            What happens now?                            #
	#-------------------------------------------------------------------------#
	
	Alright, you've gathered the data needed and told us about the issue? Good.
	What happens next usually depends on what kind of issue it is and where you
	went to report it:
	
	Reported on Slack
	- Minor bug: When you report what turns out to be a minor bug (minor
	  refering to the technical complexity of the issue, not your problem that
	  lead you to us), especially on the slack channels, odds are, on of us
	  picked it up and immediately resolved it. In this case we'll tell you
	  "it's handled" and that's it as far as you go: In the next release, the
	  issue will be gone.
	- Major issue: Some bugs are just too technically complex to solve on the
	  fly. In those cases we will ask you to file an issue or file it for you,
	  whichever you prefer. We'll try to see it resolved in a timely manner and
	  inform you as it has been resolved or ask you to try out a current build
	  and confirm it.
	
	Reported on GitHub
	The key differences between reporting a problem on Github and doing so on
	Slack is that are:
	
	a) We cannot ask questions directly as you post.
	b) Reporting the issue does not require team members to be present.
	
	We often ARE there, hanging out in Slack, but it is not automatically
	guaranteed. That being said, after you have filed an issue on GitHub, please
	keep track of that issue, as we will likely ask questions or ask you to test
	out solutions. Really, the process is mostly the same, only that since we
	can't make sure all the information we need is there when you report it, we
	may need to ask for it.
	
	
	#-------------------------------------------------------------------------#
	#                         The world need not burn                         #
	#-------------------------------------------------------------------------#
	
	Thank you for reading our advisory on receiving support. Note however: It is
	totally not necessary to wait until something breaks to contact us: Come on
	over into the slack channels and hang out, discuss sql server or the
	benefits of the	local breweries.
	
	
KEYWORDS
	dbatools general support help

tools\dbatools\functions\Add-DbaAgDatabase.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Add-DbaAgDatabase {
    <#
    .SYNOPSIS
        Adds a database to an availability group on a SQL Server instance.

    .DESCRIPTION
        Adds a database to an availability group on a SQL Server instance.

        Before joining the replica databases to the availablity group, the databases will be initialized with automatic seeding or full/log backup.

   .PARAMETER SqlInstance
        The target SQL Server instance or instances. Server version must be SQL Server version 2012 or higher.

        This should be the primary replica.

    .PARAMETER SqlCredential
        Login to the SqlInstance instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The database or databases to add.

    .PARAMETER AvailabilityGroup
        The availability group where the databases will be added.

    .PARAMETER Secondary
        Not required - the command will figure this out. But if you'd like to be explicit about replicas, this will help.

    .PARAMETER SecondarySqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER InputObject
        Enables piping from Get-DbaDatabase, Get-DbaDbSharePoint and more.

    .PARAMETER SeedingMode
        Specifies how the secondary replica will be initially seeded.

        Automatic enables direct seeding. This method will seed the secondary replica over the network. This method does not require you to backup and restore a copy of the primary database on the replica.

        Manual requires you to create a backup of the database on the primary replica and manually restore that backup on the secondary replica.

        If not specified, the setting from the availability group replica will be used. Otherwise the setting will be updated.

    .PARAMETER SharedPath
        The network share where the backups will be backed up and restored from.

        Each SQL Server service account must have access to this share.

        NOTE: If a backup / restore is performed, the backups will be left in tact on the network share.

    .PARAMETER UseLastBackup
        Use the last full backup of database.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: AvailabilityGroup, HA, AG
        Author: Chrissy LeMaire (@cl), netnerds.net
        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Add-DbaAgDatabase

    .EXAMPLE
        PS C:\> Add-DbaAgDatabase -SqlInstance sql2017a -AvailabilityGroup ag1 -Database db1, db2 -Confirm

        Adds db1 and db2 to ag1 on sql2017a. Prompts for confirmation.

    .EXAMPLE
        PS C:\> Get-DbaDatabase -SqlInstance sql2017a | Out-GridView -Passthru | Add-DbaAgDatabase -AvailabilityGroup ag1

        Adds selected databases from sql2017a to ag1

    .EXAMPLE
        PS C:\> Get-DbaDbSharePoint -SqlInstance sqlcluster | Add-DbaAgDatabase -AvailabilityGroup SharePoint

        Adds SharePoint databases as found in SharePoint_Config on sqlcluster to ag1 on sqlcluster

    .EXAMPLE
        PS C:\> Get-DbaDbSharePoint -SqlInstance sqlcluster -ConfigDatabase SharePoint_Config_2019 | Add-DbaAgDatabase -AvailabilityGroup SharePoint

        Adds SharePoint databases as found in SharePoint_Config_2019 on sqlcluster to ag1 on sqlcluster
    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'Low')]
    param (
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [parameter(Mandatory)]
        [string]$AvailabilityGroup,
        [string[]]$Database,
        [DbaInstanceParameter[]]$Secondary,
        [PSCredential]$SecondarySqlCredential,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Database[]]$InputObject,
        [ValidateSet('Automatic', 'Manual')]
        [string]$SeedingMode,
        [string]$SharedPath,
        [switch]$UseLastBackup,
        [switch]$EnableException
    )
    process {
        if ((Test-Bound -ParameterName SqlInstance)) {
            if ((Test-Bound -Not -ParameterName Database) -or (Test-Bound -Not -ParameterName AvailabilityGroup)) {
                Stop-Function -Message "You must specify one or more databases and one Availability Group when using the SqlInstance parameter."
                return
            }
        }

        foreach ($instance in $SqlInstance) {
            $InputObject += Get-DbaDatabase -SqlInstance $instance -SqlCredential $SqlCredential -Database $Database
        }

        foreach ($db in $InputObject) {
            $allbackups = @{
            }

            $Primary = $db.Parent
            # check primary, should be run against primary
            $ag = Get-DbaAvailabilityGroup -SqlInstance $db.Parent -AvailabilityGroup $AvailabilityGroup

            if ($ag.AvailabilityDatabases.Name -contains $db.Name) {
                Stop-Function -Message "$($db.Name) is already joined to $($ag.Name)" -Continue
            }

            if (-not $Secondary) {
                $secondaryReplicas = $ag.AvailabilityReplicas | Where-Object Role -eq Secondary
            } else {
                $secondaryReplicas = Get-DbaAgReplica -SqlInstance $Secondary -SqlCredential $SecondarySqlCredential -AvailabilityGroup $ag.Name | Where-Object Role -eq Secondary
            }

            if ($SeedingMode -eq "Automatic") {
                # first check
                if ($Pscmdlet.ShouldProcess($Primary, "Backing up $db to NUL")) {
                    $null = Backup-DbaDatabase -BackupFileName NUL -SqlInstance $Primary -SqlCredential $SqlCredential -Database $db
                }
            }

            if ($Pscmdlet.ShouldProcess($ag.Parent.Name, "Adding availability group $db to $($db.Parent.Name)")) {
                try {
                    $agdb = New-Object Microsoft.SqlServer.Management.Smo.AvailabilityDatabase($ag, $db.Name)
                    # something is up with .net create(), force a stop
                    Invoke-Create -Object $agdb
                    Get-DbaAgDatabase -SqlInstance $ag.Parent -Database $db.Name
                } catch {
                    Stop-Function -Message "Failure" -ErrorRecord $_ -Continue
                }
            }

            foreach ($replica in $secondaryReplicas) {

                $agreplica = Get-DbaAgReplica -SqlInstance $Primary -SqlCredential $SqlCredential -AvailabilityGroup $ag.name -Replica $replica.Name

                if ($SeedingMode) {
                    $agreplica.SeedingMode = $SeedingMode
                    $agreplica.alter()
                }
                $agreplica.refresh()
                $SeedingModeReplica = $agreplica.SeedingMode

                $primarydb = Get-DbaDatabase -SqlInstance $Primary -SqlCredential $SqlCredential -Database $db.name

                if ($SeedingModeReplica -ne 'Automatic') {
                    try {
                        if (-not $allbackups[$db]) {
                            if ($UseLastBackup) {
                                $allbackups[$db] = Get-DbaBackupHistory -SqlInstance $primarydb.Parent -Database $primarydb.Name -IncludeCopyOnly -Last -EnableException
                            } else {
                                $fullbackup = $primarydb | Backup-DbaDatabase -BackupDirectory $SharedPath -Type Full -EnableException
                                $logbackup = $primarydb | Backup-DbaDatabase -BackupDirectory $SharedPath -Type Log -EnableException
                                $allbackups[$db] = $fullbackup, $logbackup
                            }
                            Write-Message -Level Verbose -Message "Backups still exist on $SharedPath"
                        }
                        if ($Pscmdlet.ShouldProcess("$Secondary", "restoring full and log backups of $primarydb from $Primary")) {
                            # keep going to ensure output is shown even if dbs aren't added well.
                            $null = $allbackups[$db] | Restore-DbaDatabase -SqlInstance $replica.Parent.Parent -WithReplace -NoRecovery -TrustDbBackupHistory -EnableException
                        }
                    } catch {
                        Stop-Function -Message "Failure" -ErrorRecord $_ -Continue
                    }
                }

                $replicadb = Get-DbaAgDatabase -SqlInstance $replica.Parent.Parent -Database $db.Name -AvailabilityGroup $ag.Name   #credential of secondary !!

                if ($replicadb -and -not ($SeedingModeReplica -eq 'Automatic')) {
                    if ($Pscmdlet.ShouldProcess($ag.Parent.Name, "Joining availability group $db to $($db.Parent.Name)")) {
                        $timeout = 1
                        do {
                            try {
                                Write-Message -Level Verbose -Message "Trying to add $($replicadb.Name) to $($replica.Name)"
                                $timeout++
                                $replicadb.JoinAvailablityGroup()
                                $replicadb.Refresh()
                                Start-Sleep -Seconds 1
                            } catch {
                                Stop-Function -Message "Error joining database to availability group" -ErrorRecord $_ -Continue
                            }
                        } while (-not $replicadb.IsJoined -and $timeout -lt 10)

                        if ($replicadb.IsJoined) {
                            $replicadb
                        } else {
                            Stop-Function -Continue -Message "Could not join $($replicadb.Name) to $($replica.Name)"
                        }
                    }
                } else {
                    $replicadb
                }
            }
        }
    }
}

tools\dbatools\functions\Add-DbaAgListener.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Add-DbaAgListener {
    <#
    .SYNOPSIS
        Adds a listener to an availability group on a SQL Server instance.

    .DESCRIPTION
        Adds a listener to an availability group on a SQL Server instance.

   .PARAMETER SqlInstance
        The target SQL Server instance or instances. Server version must be SQL Server version 2012 or higher.

    .PARAMETER SqlCredential
        Login to the SqlInstance instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER AvailabilityGroup
        The Availability Group to which a listener will be bestowed upon.

    .PARAMETER IPAddress
        Sets the IP address of the availability group listener.

    .PARAMETER SubnetMask
        Sets the subnet IP mask of the availability group listener. Defaults to 255.255.255.0.

    .PARAMETER Port
        Sets the port number used to communicate with the availability group. Defaults to 1433.

    .PARAMETER Dhcp
        Indicates whether the listener uses DHCP.

    .PARAMETER Passthru
        Don't create the listener, just pass thru an object that can be further customized before creation.

    .PARAMETER InputObject
        Enables piping from Get-DbaAvailabilityGroup

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: AvailabilityGroup, HA, AG
        Author: Chrissy LeMaire (@cl), netnerds.net
        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Add-DbaAgListener

    .EXAMPLE
        PS C:\> Add-DbaAgListener -SqlInstance sql2017 -AvailabilityGroup SharePoint -IPAddress 10.0.20.20

        Creates a listener on 10.0.20.20 port 1433 for the SharePoint availability group on sql2017.

    .EXAMPLE
        PS C:\> Get-DbaAvailabilityGroup -SqlInstance sql2017 -AvailabilityGroup availabilitygroup1 | Add-DbaAgListener -Dhcp

        Creates a listener on port 1433 with a dynamic IP for the group1 availability group on sql2017.

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'Low')]
    param (
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$AvailabilityGroup,
        [ipaddress]$IPAddress,
        [ipaddress]$SubnetMask = "255.255.255.0",
        [int]$Port = 1433,
        [switch]$Dhcp,
        [switch]$Passthru,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.AvailabilityGroup[]]$InputObject,
        [switch]$EnableException
    )
    process {
        if ((Test-Bound -ParameterName SqlInstance) -and (Test-Bound -Not -ParameterName AvailabilityGroup)) {
            Stop-Function -Message "You must specify one or more databases and one or more Availability Groups when using the SqlInstance parameter."
            return
        }

        if ($SqlInstance) {
            $InputObject += Get-DbaAvailabilityGroup -SqlInstance $SqlInstance -SqlCredential $SqlCredential -AvailabilityGroup $AvailabilityGroup
        }

        foreach ($ag in $InputObject) {
            if ((Test-Bound -Not -ParameterName Name)) {
                $Name = $ag.Name
            }
            if ($Pscmdlet.ShouldProcess($ag.Parent.Name, "Adding $($IPAddress.IPAddressToString) to $($ag.Name)")) {
                try {
                    $aglistener = New-Object Microsoft.SqlServer.Management.Smo.AvailabilityGroupListener -ArgumentList $ag, $Name
                    $aglistener.PortNumber = $Port
                    $listenerip = New-Object Microsoft.SqlServer.Management.Smo.AvailabilityGroupListenerIPAddress -ArgumentList $aglistener

                    if (Test-Bound -ParameterName IPAddress) {
                        $listenerip.IPAddress = $IPAddress.IPAddressToString
                        $listenerip.SubnetMask = $SubnetMask.IPAddressToString
                    }

                    $listenerip.IsDHCP = $Dhcp
                    $aglistener.AvailabilityGroupListenerIPAddresses.Add($listenerip)

                    if ($Passthru) {
                        return $aglistener
                    } else {
                        # something is up with .net create(), force a stop
                        Invoke-Create -Object $aglistener
                    }
                } catch {
                    Stop-Function -Message "Failure" -ErrorRecord $_
                }
                Get-DbaAgListener -SqlInstance $ag.Parent -AvailabilityGroup $ag.Name -Listener $Name
            }
        }
    }
}

tools\dbatools\functions\Add-DbaAgReplica.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Add-DbaAgReplica {
    <#
    .SYNOPSIS
        Adds a replica to an availability group on a SQL Server instance.

    .DESCRIPTION
        Adds a replica to an availability group on a SQL Server instance.

        Automatically creates a database mirroring endpoint if required.

   .PARAMETER SqlInstance
        The target SQL Server instance or instances. Server version must be SQL Server version 2012 or higher.

    .PARAMETER SqlCredential
        Login to the SqlInstance instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Name
        The name of the replica. Defaults to the SQL Server instance name.

    .PARAMETER AvailabilityMode
        Sets the availability mode of the availability group replica. Options are: AsynchronousCommit and SynchronousCommit. SynchronousCommit is default.

    .PARAMETER FailoverMode
        Sets the failover mode of the availability group replica. Options are Automatic and Manual. Automatic is default.

    .PARAMETER BackupPriority
        Sets the backup priority availability group replica. Default is 50.

    .PARAMETER Endpoint
        By default, this command will attempt to find a DatabaseMirror endpoint. If one does not exist, it will create it.

        If an endpoint must be created, the name "hadr_endpoint" will be used. If an alternative is preferred, use Endpoint.

    .PARAMETER Passthru
        Don't create the replica, just pass thru an object that can be further customized before creation.

    .PARAMETER InputObject
        Enables piping from Get-DbaAvailabilityGroup.

    .PARAMETER ConnectionModeInPrimaryRole
        Specifies the connection intent modes of an Availability Replica in primary role. AllowAllConnections by default.

    .PARAMETER ConnectionModeInSecondaryRole
        Specifies the connection modes of an Availability Replica in secondary role. AllowAllConnections by default.

    .PARAMETER ReadonlyRoutingConnectionUrl
        Sets the read only routing connection url for the availability replica.

    .PARAMETER SeedingMode
        Specifies how the secondary replica will be initially seeded.

        Automatic enables direct seeding. This method will seed the secondary replica over the network. This method does not require you to backup and restore a copy of the primary database on the replica.

        Manual requires you to create a backup of the database on the primary replica and manually restore that backup on the secondary replica.

    .PARAMETER Certificate
        Specifies that the endpoint is to authenticate the connection using the certificate specified by certificate_name to establish identity for authorization.

        The far endpoint must have a certificate with the public key matching the private key of the specified certificate.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: AvailabilityGroup, HA, AG
        Author: Chrissy LeMaire (@cl), netnerds.net
        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Add-DbaAgReplica

    .EXAMPLE
        PS C:\> Get-DbaAvailabilityGroup -SqlInstance sql2017a -AvailabilityGroup SharePoint | Add-DbaAgReplica -SqlInstance sql2017b

        Adds sql2017b to the SharePoint availability group on sql2017a

    .EXAMPLE
        PS C:\> Get-DbaAvailabilityGroup -SqlInstance sql2017a -AvailabilityGroup SharePoint | Add-DbaAgReplica -SqlInstance sql2017b -FailoverMode Manual

        Adds sql2017b to the SharePoint availability group on sql2017a with a manual failover mode.
    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'Low')]
    param (
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string]$Name,
        [ValidateSet('AsynchronousCommit', 'SynchronousCommit')]
        [string]$AvailabilityMode = "SynchronousCommit",
        [ValidateSet('Automatic', 'Manual', 'External')]
        [string]$FailoverMode = "Automatic",
        [int]$BackupPriority = 50,
        [ValidateSet('AllowAllConnections', 'AllowReadWriteConnections')]
        [string]$ConnectionModeInPrimaryRole = 'AllowAllConnections',
        [ValidateSet('AllowAllConnections', 'AllowNoConnections', 'AllowReadIntentConnectionsOnly')]
        [string]$ConnectionModeInSecondaryRole = 'AllowAllConnections',
        [ValidateSet('Automatic', 'Manual')]
        [string]$SeedingMode = 'Automatic',
        [string]$Endpoint,
        [switch]$Passthru,
        [string]$ReadonlyRoutingConnectionUrl,
        [string]$Certificate,
        [parameter(ValueFromPipeline, Mandatory)]
        [Microsoft.SqlServer.Management.Smo.AvailabilityGroup]$InputObject,
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 11
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            if ($Certificate) {
                $cert = Get-DbaDbCertificate -SqlInstance $server -Certificate $Certificate
                if (-not $cert) {
                    Stop-Function -Message "Certificate $Certificate does not exist on $instance" -ErrorRecord $_ -Target $Certificate -Continue
                }
            }

            $ep = Get-DbaEndpoint -SqlInstance $server -Type DatabaseMirroring

            if (-not $ep) {
                if ($Pscmdlet.ShouldProcess($server.Name, "Adding endpoint named $Endpoint to $instance")) {
                    if (-not $Endpoint) {
                        $Endpoint = "hadr_endpoint"
                    }
                    $ep = New-DbaEndpoint -SqlInstance $server -Name hadr_endpoint -Type DatabaseMirroring -EndpointEncryption Supported -EncryptionAlgorithm Aes -Certificate $Certificate
                    $null = $ep | Start-DbaEndpoint
                }
            }

            if ((Test-Bound -Not -ParameterName Name)) {
                $Name = $server.DomainInstanceName
            }

            if ($Pscmdlet.ShouldProcess($server.Name, "Creating a replica for $($InputObject.Name) named $Name")) {
                try {
                    $replica = New-Object Microsoft.SqlServer.Management.Smo.AvailabilityReplica -ArgumentList $InputObject, $Name
                    $replica.EndpointUrl = $ep.Fqdn
                    $replica.FailoverMode = [Microsoft.SqlServer.Management.Smo.AvailabilityReplicaFailoverMode]::$FailoverMode
                    $replica.AvailabilityMode = [Microsoft.SqlServer.Management.Smo.AvailabilityReplicaAvailabilityMode]::$AvailabilityMode
                    if ($server.EngineEdition -ne "Standard") {
                        $replica.ConnectionModeInPrimaryRole = [Microsoft.SqlServer.Management.Smo.AvailabilityReplicaConnectionModeInPrimaryRole]::$ConnectionModeInPrimaryRole
                        $replica.ConnectionModeInSecondaryRole = [Microsoft.SqlServer.Management.Smo.AvailabilityReplicaConnectionModeInSecondaryRole]::$ConnectionModeInSecondaryRole
                    }
                    $replica.BackupPriority = $BackupPriority

                    if ($ReadonlyRoutingConnectionUrl) {
                        $replica.ReadonlyRoutingConnectionUrl = $ReadonlyRoutingConnectionUrl
                    }

                    if ($SeedingMode -and $server.VersionMajor -ge 13) {
                        $replica.SeedingMode = $SeedingMode
                    }

                    if ($Passthru) {
                        return $replica
                    }

                    $defaults = 'ComputerName', 'InstanceName', 'SqlInstance', 'AvailabilityGroup', 'Name', 'Role', 'RollupSynchronizationState', 'AvailabilityMode', 'BackupPriority', 'EndpointUrl', 'SessionTimeout', 'FailoverMode', 'ReadonlyRoutingList'
                    $InputObject.AvailabilityReplicas.Add($replica)
                    $agreplica = $InputObject.AvailabilityReplicas[$Name]
                    if ($InputObject.State -eq 'Existing') {
                        Invoke-Create -Object $replica
                        $null = Join-DbaAvailabilityGroup -SqlInstance $instance -SqlCredential $SqlCredential -AvailabilityGroup $InputObject.Name
                    }
                    Add-Member -Force -InputObject $agreplica -MemberType NoteProperty -Name ComputerName -value $agreplica.Parent.ComputerName
                    Add-Member -Force -InputObject $agreplica -MemberType NoteProperty -Name InstanceName -value $agreplica.Parent.InstanceName
                    Add-Member -Force -InputObject $agreplica -MemberType NoteProperty -Name SqlInstance -value $agreplica.Parent.SqlInstance
                    Add-Member -Force -InputObject $agreplica -MemberType NoteProperty -Name AvailabilityGroup -value $agreplica.Parent.Name
                    Add-Member -Force -InputObject $agreplica -MemberType NoteProperty -Name Replica -value $agreplica.Name # backwards compat

                    Select-DefaultView -InputObject $agreplica -Property $defaults
                } catch {
                    $msg = $_.Exception.InnerException.InnerException.Message
                    if (-not $msg) {
                        $msg = $_
                    }
                    Stop-Function -Message $msg -ErrorRecord $_ -Continue
                }
            }
        }
    }
}

tools\dbatools\functions\Add-DbaCmsRegServer.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Add-DbaCmsRegServer {
    <#
    .SYNOPSIS
        Adds registered servers to SQL Server Central Management Server (CMS)

    .DESCRIPTION
        Adds registered servers to SQL Server Central Management Server (CMS). If you need more flexiblity, look into Import-DbaCmsRegServer which
        accepts multiple kinds of input and allows you to add reg servers from different CMSes.

    .PARAMETER SqlInstance
        The target SQL Server instance

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER ServerName
        Server Name is the actual SQL instance name (labeled Server Name)

    .PARAMETER Name
        Name is basically the nickname in SSMS CMS interface (labeled Registered Server Name)

    .PARAMETER Description
        Adds a description for the registered server

    .PARAMETER Group
        Adds the registered server to a specific group.

    .PARAMETER InputObject
        Allows the piping of a registered server group

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.

        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.

        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: RegisteredServer, CMS
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Add-DbaCmsRegServer

    .EXAMPLE
        PS C:\> Add-DbaCmsRegServer -SqlInstance sql2008 -ServerName sql01

        Creates a registered server on sql2008's CMS which points to the SQL Server, sql01. When scrolling in CMS, the name "sql01" will be visible.

    .EXAMPLE
        PS C:\> Add-DbaCmsRegServer -SqlInstance sql2008 -ServerName sql01 -Name "The 2008 Clustered Instance" -Description "HR's Dedicated SharePoint instance"

        Creates a registered server on sql2008's CMS which points to the SQL Server, sql01. When scrolling in CMS, "The 2008 Clustered Instance" will be visible.
        Clearly this is hard to explain ;)

    .EXAMPLE
        PS C:\> Add-DbaCmsRegServer -SqlInstance sql2008 -ServerName sql01 -Group hr\Seattle

        Creates a registered server on sql2008's CMS which points to the SQL Server, sql01. When scrolling in CMS, the name "sql01" will be visible within the Seattle group which is in the hr group.

    .EXAMPLE
        PS C:\> Get-DbaCmsRegServerGroup -SqlInstance sql2008 -Group hr\Seattle | Add-DbaCmsRegServer -ServerName sql01111

        Creates a registered server on sql2008's CMS which points to the SQL Server, sql01. When scrolling in CMS, the name "sql01" will be visible within the Seattle group which is in the hr group.

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [parameter(Mandatory)]
        [string]$ServerName,
        [string]$Name = $ServerName,
        [string]$Description,
        [object]$Group,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.RegisteredServers.ServerGroup[]]$InputObject,
        [switch]$EnableException
    )
    process {
        if (-not $InputObject -and -not $SqlInstance) {
            Stop-Function -Message "You must either pipe in a registered server group or specify a sqlinstance"
            return
        }

        # double check in case a null name was bound
        if (-not $Name) {
            $Name = $ServerName
        }

        foreach ($instance in $SqlInstance) {
            if (($Group)) {
                if ($Group -is [Microsoft.SqlServer.Management.RegisteredServers.ServerGroup]) {
                    $InputObject += Get-DbaCmsRegServerGroup -SqlInstance $instance -SqlCredential $SqlCredential -Group $Group.Name
                } else {
                    $InputObject += Get-DbaCmsRegServerGroup -SqlInstance $instance -SqlCredential $SqlCredential -Group $Group
                }
            } else {
                $InputObject += Get-DbaCmsRegServerGroup -SqlInstance $instance -SqlCredential $SqlCredential -Id 1
            }

            if (-not $InputObject) {
                Stop-Function -Message "No matching groups found on $instance" -Continue
            }
        }

        foreach ($reggroup in $InputObject) {
            $parentserver = Get-RegServerParent -InputObject $reggroup

            if ($null -eq $parentserver) {
                Stop-Function -Message "Something went wrong and it's hard to explain, sorry. This basically shouldn't happen." -Continue
            }

            $server = $parentserver.ServerConnection.SqlConnectionObject

            if ($Pscmdlet.ShouldProcess($parentserver.SqlInstance, "Adding $ServerName")) {
                try {
                    $newserver = New-Object Microsoft.SqlServer.Management.RegisteredServers.RegisteredServer($reggroup, $Name)
                    $newserver.ServerName = $ServerName
                    $newserver.Description = $Description
                    $newserver.Create()

                    Get-DbaCmsRegServer -SqlInstance $server -Name $Name -ServerName $ServerName
                } catch {
                    Stop-Function -Message "Failed to add $ServerName on $($parentserver.SqlInstance)" -ErrorRecord $_ -Continue
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias Add-DbaRegisteredServer
    }
}

tools\dbatools\functions\Add-DbaCmsRegServerGroup.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Add-DbaCmsRegServerGroup {
    <#
    .SYNOPSIS
        Adds registered server groups to SQL Server Central Management Server (CMS)

    .DESCRIPTION
        Adds registered server groups to SQL Server Central Management Server (CMS). If you need more flexibility, look into Import-DbaCmsRegServer which accepts multiple kinds of input and allows you to add reg servers and groups from different CMS.

    .PARAMETER SqlInstance
        The target SQL Server instance

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Name
        The name of the registered server group

    .PARAMETER Description
        The description for the registered server group

    .PARAMETER Group
        The SQL Server Central Management Server group. If no groups are specified, the new group will be created at the root.

    .PARAMETER InputObject
        Allows results from Get-DbaCmsRegServerGroup to be piped in

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.

        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.

        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: RegisteredServer, CMS
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Add-DbaCmsRegServerGroup

    .EXAMPLE
        PS C:\> Add-DbaCmsRegServerGroup -SqlInstance sql2012 -Name HR

        Creates a registered server group called HR, in the root of sql2012's CMS

    .EXAMPLE
        PS C:\> Add-DbaCmsRegServerGroup -SqlInstance sql2012, sql2014 -Name sub-folder -Group HR

        Creates a registered server group on sql2012 and sql2014 called sub-folder within the HR group

    .EXAMPLE
        PS C:\> Get-DbaCmsRegServerGroup -SqlInstance sql2012, sql2014 -Group HR | Add-DbaCmsRegServerGroup -Name sub-folder

        Creates a registered server group on sql2012 and sql2014 called sub-folder within the HR group of each server

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [parameter(Mandatory)]
        [string]$Name,
        [string]$Description,
        [string]$Group,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.RegisteredServers.ServerGroup[]]$InputObject,
        [switch]$EnableException
    )
    process {
        if (-not $InputObject -and -not $SqlInstance) {
            Stop-Function -Message "You must either pipe in a registered server group or specify a sqlinstance"
            return
        }
        foreach ($instance in $SqlInstance) {
            if ((Test-Bound -ParameterName Group)) {
                $InputObject += Get-DbaCmsRegServerGroup -SqlInstance $instance -SqlCredential $SqlCredential -Group $Group
            } else {
                $InputObject += Get-DbaCmsRegServerGroup -SqlInstance $instance -SqlCredential $SqlCredential -Id 1
            }
        }

        foreach ($reggroup in $InputObject) {
            $parentserver = Get-RegServerParent -InputObject $reggroup
            $server = $parentserver.ServerConnection.ServerInstance.SqlConnectionObject

            if ($null -eq $parentserver) {
                Stop-Function -Message "Something went wrong and it's hard to explain, sorry. This basically shouldn't happen." -Continue
            }

            if ($Pscmdlet.ShouldProcess($parentserver.SqlInstance, "Adding $Name")) {
                try {
                    $newgroup = New-Object Microsoft.SqlServer.Management.RegisteredServers.ServerGroup($reggroup, $Name)
                    $newgroup.Description = $Description
                    $newgroup.Create()

                    Get-DbaCmsRegServerGroup -SqlInstance $parentserver.ServerConnection.SqlConnectionObject -Group (Get-RegServerGroupReverseParse -object $newgroup)
                    $parentserver.ServerConnection.Disconnect()
                } catch {
                    Stop-Function -Message "Failed to add $reggroup on $server" -ErrorRecord $_ -Continue
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias Add-DbaRegisteredServerGroup
    }
}

tools\dbatools\functions\Add-DbaComputerCertificate.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Add-DbaComputerCertificate {
    <#
    .SYNOPSIS
        Adds a computer certificate - useful for older systems.

    .DESCRIPTION
        Adds a computer certificate from a local or remote computer.

    .PARAMETER ComputerName
        The target SQL Server instance or instances. Defaults to localhost.

    .PARAMETER Credential
        Allows you to login to $ComputerName using alternative credentials.

    .PARAMETER SecurePassword
        The password for the certificate, if it is password protected.

    .PARAMETER Certificate
        The target certificate object.

    .PARAMETER Path
        The local path to the target certificate object.

    .PARAMETER Store
        Certificate store. Default is LocalMachine.

    .PARAMETER Folder
        Certificate folder. Default is My (Personal).

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .NOTES
        Tags: Certificate
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Add-DbaComputerCertificate -ComputerName Server1 -Path C:\temp\cert.cer

        Adds the local C:\temp\cert.cer to the remote server Server1 in LocalMachine\My (Personal).

    .EXAMPLE
        PS C:\> Add-DbaComputerCertificate -Path C:\temp\cert.cer

        Adds the local C:\temp\cert.cer to the local computer's LocalMachine\My (Personal) certificate store.

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "Low")]
    param (
        [Alias("ServerInstance", "SqlServer", "SqlInstance")]
        [DbaInstance[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [Alias("Password")]
        [SecureString]$SecurePassword,
        [parameter(ValueFromPipeline)]
        [System.Security.Cryptography.X509Certificates.X509Certificate2[]]$Certificate,
        [string]$Path,
        [string]$Store = "LocalMachine",
        [string]$Folder = "My",
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {

        if ($Path) {
            if (!(Test-Path -Path $Path)) {
                Stop-Function -Message "Path ($Path) does not exist." -Category InvalidArgument
                return
            }

            try {
                # This may be too much, but oh well
                $bytes = [System.IO.File]::ReadAllBytes($Path)
                $Certificate = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2
                $Certificate.Import($bytes, $SecurePassword, [System.Security.Cryptography.X509Certificates.X509KeyStorageFlags]::DefaultKeySet)
            } catch {
                Stop-Function -Message "Can't import certificate." -ErrorRecord $_
                return
            }
        }

        #region Remoting Script
        $scriptBlock = {

            param (
                $CertificateData,

                [SecureString]$SecurePassword,

                $Store,

                $Folder
            )

            $cert = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2
            $cert.Import($CertificateData, $SecurePassword, [System.Security.Cryptography.X509Certificates.X509KeyStorageFlags]::DefaultKeySet)
            Write-Message -Level Verbose -Message "Importing cert to $Folder\$Store"
            $tempStore = New-Object System.Security.Cryptography.X509Certificates.X509Store($Folder, $Store)
            $tempStore.Open('ReadWrite')
            $tempStore.Add($cert)
            $tempStore.Close()

            Write-Message -Level Verbose -Message "Searching Cert:\$Store\$Folder"
            Get-ChildItem "Cert:\$Store\$Folder" -Recurse | Where-Object { $_.Thumbprint -eq $cert.Thumbprint }
        }
        #endregion Remoting Script
    }
    process {
        if (Test-FunctionInterrupt) { return }

        if (-not $Certificate) {
            Stop-Function -Message "You must specify either Certificate or Path" -Category InvalidArgument
            return
        }

        foreach ($cert in $Certificate) {

            try {
                $certData = $cert.Export([System.Security.Cryptography.X509Certificates.X509ContentType]::PFX, $SecurePassword)
            } catch {
                Stop-Function -Message "Can't export certificate" -ErrorRecord $_ -Continue
            }

            foreach ($computer in $ComputerName) {

                if ($PSCmdlet.ShouldProcess("local", "Connecting to $computer to import cert")) {
                    try {
                        Invoke-Command2 -ComputerName $computer -Credential $Credential -ArgumentList $certdata, $SecurePassword, $Store, $Folder -ScriptBlock $scriptblock -ErrorAction Stop |
                            Select-DefaultView -Property FriendlyName, DnsNameList, Thumbprint, NotBefore, NotAfter, Subject, Issuer
                    } catch {
                        Stop-Function -Message "Failure" -ErrorRecord $_ -Target $computer -Continue
                    }
                }
            }
        }
    }
}

tools\dbatools\bin\XEtemplates\Profiler TSQL Replay.xml

<event_sessions xmlns="http://schemas.microsoft.com/sqlserver/2008/07/extendedeventconfig">
  <event_session name="Profiler TSQL Replay" maxMemory="4" eventRetentionMode="allowSingleEventLoss" trackCausality="true" dispatchLatency="30" maxEventSize="0" memoryPartitionMode="none">
    <templateCategory>
      <!-- _locID_text="templateCategory" _locComment = "" -->Profiler Equivalents</templateCategory>
    <templateName>
      <!-- _locID_text = "templateName" _locComment = "" -->Profiler TSQL Replay</templateName>
    <templateDescription>
      <!-- _locID_text = "templateDescription" _locComment = "" -->Matches the 'TSQL_Replay' template in Profiler. Use to perform iterative tuning, such as benchmark testing.</templateDescription>
    <event package="sqlserver" name="attention">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_pid" />
      <action package="sqlserver" name="client_hostname" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="database_name" />
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="is_system" />
      <action package="sqlserver" name="nt_username" />
      <action package="sqlserver" name="request_id" />
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="server_instance_name" />
      <action package="sqlserver" name="session_id" />      
    </event>
    <event package="sqlserver" name="cursor_close">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_pid" />
      <action package="sqlserver" name="client_hostname" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="database_name" />
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="is_system" />
      <action package="sqlserver" name="nt_username" />
      <action package="sqlserver" name="request_id" />
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="server_instance_name" />
      <action package="sqlserver" name="session_id" />      
    </event>
    <event package="sqlserver" name="cursor_execute">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_pid" />
      <action package="sqlserver" name="client_hostname" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="database_name" />
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="is_system" />
      <action package="sqlserver" name="nt_username" />
      <action package="sqlserver" name="request_id" />
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="server_instance_name" />
      <action package="sqlserver" name="session_id" />      
    </event>
    <event package="sqlserver" name="cursor_open">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_pid" />
      <action package="sqlserver" name="client_hostname" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="database_name" />
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="is_system" />
      <action package="sqlserver" name="nt_username" />
      <action package="sqlserver" name="request_id" />
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="server_instance_name" />
      <action package="sqlserver" name="session_id" />      
    </event>
    <event package="sqlserver" name="cursor_prepare">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_pid" />
      <action package="sqlserver" name="client_hostname" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="database_name" />
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="is_system" />
      <action package="sqlserver" name="nt_username" />
      <action package="sqlserver" name="request_id" />
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="server_instance_name" />
      <action package="sqlserver" name="session_id" />      
    </event>
    <event package="sqlserver" name="cursor_unprepare">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_pid" />
      <action package="sqlserver" name="client_hostname" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="database_name" />
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="is_system" />
      <action package="sqlserver" name="nt_username" />
      <action package="sqlserver" name="request_id" />
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="server_instance_name" />
      <action package="sqlserver" name="session_id" />      
    </event>
    <event package="sqlserver" name="exec_prepared_sql">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_pid" />
      <action package="sqlserver" name="client_hostname" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="database_name" />
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="is_system" />
      <action package="sqlserver" name="nt_username" />
      <action package="sqlserver" name="request_id" />
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="server_instance_name" />
      <action package="sqlserver" name="session_id" />      
    </event>
    <event package="sqlserver" name="existing_connection">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_pid" />
      <action package="sqlserver" name="client_hostname" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="database_name" />
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="is_system" />
      <action package="sqlserver" name="nt_username" />
      <action package="sqlserver" name="request_id" />
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="server_instance_name" />
      <action package="sqlserver" name="session_id" />      
    </event>
    <event package="sqlserver" name="login">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_pid" />
      <action package="sqlserver" name="client_hostname" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="database_name" />
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="is_system" />
      <action package="sqlserver" name="nt_username" />
      <action package="sqlserver" name="request_id" />
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="server_instance_name" />
      <action package="sqlserver" name="session_id" />      
      <parameter name="collect_options_text" value="1" />
    </event>
    <event package="sqlserver" name="logout">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_pid" />
      <action package="sqlserver" name="client_hostname" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="database_name" />
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="is_system" />
      <action package="sqlserver" name="nt_username" />
      <action package="sqlserver" name="request_id" />
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="server_instance_name" />
      <action package="sqlserver" name="session_id" />      
    </event>
    <event package="sqlserver" name="prepare_sql">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_pid" />
      <action package="sqlserver" name="client_hostname" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="database_name" />
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="is_system" />
      <action package="sqlserver" name="nt_username" />
      <action package="sqlserver" name="request_id" />
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="server_instance_name" />
      <action package="sqlserver" name="session_id" />      
    </event>    
    <event package="sqlserver" name="rpc_completed">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_pid" />
      <action package="sqlserver" name="client_hostname" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="database_name" />
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="is_system" />
      <action package="sqlserver" name="nt_username" />
      <action package="sqlserver" name="request_id" />
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="server_instance_name" />
      <action package="sqlserver" name="session_id" />      
    </event>
    <event package="sqlserver" name="rpc_starting">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_pid" />
      <action package="sqlserver" name="client_hostname" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="database_name" />
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="is_system" />
      <action package="sqlserver" name="nt_username" />
      <action package="sqlserver" name="request_id" />
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="server_instance_name" />
      <action package="sqlserver" name="session_id" />      
    </event>
    <event package="sqlserver" name="sql_batch_completed">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_pid" />
      <action package="sqlserver" name="client_hostname" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="database_name" />
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="is_system" />
      <action package="sqlserver" name="nt_username" />
      <action package="sqlserver" name="request_id" />
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="server_instance_name" />
      <action package="sqlserver" name="session_id" />
    </event>
    <event package="sqlserver" name="sql_batch_starting">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_pid" />
      <action package="sqlserver" name="client_hostname" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="database_name" />
      <action package="package0" name="event_sequence" />
      <action package="sqlserver" name="is_system" />
      <action package="sqlserver" name="nt_username" />
      <action package="sqlserver" name="request_id" />
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="server_instance_name" />
      <action package="sqlserver" name="session_id" />
    </event>
  </event_session>
</event_sessions>

tools\dbatools\functions\Add-DbaPfDataCollectorCounter.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Add-DbaPfDataCollectorCounter {
    <#
    .SYNOPSIS
        Adds a Performance Data Collector Counter.

    .DESCRIPTION
        Adds a Performance Data Collector Counter.

    .PARAMETER ComputerName
        The target computer. Defaults to localhost.

    .PARAMETER Credential
        Allows you to login to $ComputerName using alternative credentials. To use:

        $cred = Get-Credential, then pass $cred object to the -Credential parameter.

    .PARAMETER CollectorSet
        The Collector Set name.

    .PARAMETER Collector
        The Collector name.

    .PARAMETER Counter
        The Counter name. This must be in the form of '\Processor(_Total)\% Processor Time'.

    .PARAMETER InputObject
        Accepts the object output by Get-DbaPfDataCollector via the pipeline.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: PerfMon
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Add-DbaPfDataCollectorCounter

    .EXAMPLE
        PS C:\> Add-DbaPfDataCollectorCounter -ComputerName sql2017 -CollectorSet 'System Correlation' -Collector DataCollector01  -Counter '\LogicalDisk(*)\Avg. Disk Queue Length'

        Adds the '\LogicalDisk(*)\Avg. Disk Queue Length' counter within the DataCollector01 collector within the System Correlation collector set on sql2017.

    .EXAMPLE
        PS C:\> Get-DbaPfDataCollector | Out-GridView -PassThru | Add-DbaPfDataCollectorCounter -Counter '\LogicalDisk(*)\Avg. Disk Queue Length' -Confirm

        Allows you to select which Data Collector you'd like to add the counter '\LogicalDisk(*)\Avg. Disk Queue Length' on localhost and prompts for confirmation.

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "Low")]
    param (
        [DbaInstance[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [Alias("DataCollectorSet")]
        [string[]]$CollectorSet,
        [Alias("DataCollector")]
        [string[]]$Collector,
        [Alias("Name")]
        [parameter(Mandatory, ValueFromPipelineByPropertyName)]
        [object[]]$Counter,
        [parameter(ValueFromPipeline)]
        [object[]]$InputObject,
        [switch]$EnableException
    )
    begin {
        $setscript = {
            $setname = $args[0]; $Addxml = $args[1]
            $set = New-Object -ComObject Pla.DataCollectorSet
            $set.SetXml($Addxml)
            $set.Commit($setname, $null, 0x0003) #add or modify.
            $set.Query($setname, $Null)
        }
    }
    process {
        if ($InputObject.Credential -and (Test-Bound -ParameterName Credential -Not)) {
            $Credential = $InputObject.Credential
        }

        if (($InputObject | Get-Member -MemberType NoteProperty -ErrorAction SilentlyContinue).Count -le 3 -and $InputObject.ComputerName -and $InputObject.Name) {
            # it's coming from Get-DbaPfAvailableCounter
            $ComputerName = $InputObject.ComputerName
            $Counter = $InputObject.Name
            $InputObject = $null
        }

        if (-not $InputObject -or ($InputObject -and (Test-Bound -ParameterName ComputerName))) {
            foreach ($computer in $ComputerName) {
                $InputObject += Get-DbaPfDataCollector -ComputerName $computer -Credential $Credential -CollectorSet $CollectorSet -Collector $Collector
            }
        }

        if ($InputObject) {
            if (-not $InputObject.DataCollectorObject) {
                Stop-Function -Message "InputObject is not of the right type. Please use Get-DbaPfDataCollector or Get-DbaPfAvailableCounter."
                return
            }
        }

        foreach ($object in $InputObject) {
            $computer = $InputObject.ComputerName
            $null = Test-ElevationRequirement -ComputerName $computer -Continue
            $setname = $InputObject.DataCollectorSet
            $collectorname = $InputObject.Name
            $xml = [xml]($InputObject.DataCollectorSetXml)

            foreach ($countername in $counter) {
                $node = $xml.SelectSingleNode("//Name[.='$collectorname']")
                $newitem = $xml.CreateElement('Counter')
                $null = $newitem.PsBase.InnerText = $countername
                $null = $node.ParentNode.AppendChild($newitem)
                $newitem = $xml.CreateElement('CounterDisplayName')
                $null = $newitem.PsBase.InnerText = $countername
                $null = $node.ParentNode.AppendChild($newitem)
            }
            $plainxml = $xml.OuterXml

            if ($Pscmdlet.ShouldProcess("$computer", "Adding $counters to $collectorname with the $setname collection set")) {
                try {
                    $results = Invoke-Command2 -ComputerName $computer -Credential $Credential -ScriptBlock $setscript -ArgumentList $setname, $plainxml -ErrorAction Stop
                    Write-Message -Level Verbose -Message " $results"
                    Get-DbaPfDataCollectorCounter -ComputerName $computer -Credential $Credential -CollectorSet $setname -Collector $collectorname -Counter $counter
                } catch {
                    Stop-Function -Message "Failure importing $Countername to $computer." -ErrorRecord $_ -Target $computer -Continue
                }
            }
        }
    }
}

tools\dbatools\functions\Backup-DbaDatabase.ps1

function Backup-DbaDatabase {
    <#
    .SYNOPSIS
        Backup one or more SQL Sever databases from a single SQL Server SqlInstance.

    .DESCRIPTION
        Performs a backup of a specified type of 1 or more databases on a single SQL Server Instance. These backups may be Full, Differential or Transaction log backups.

    .PARAMETER SqlInstance
        The SQL Server instance hosting the databases to be backed up.

    .PARAMETER SqlCredential
        Credentials to connect to the SQL Server instance if the calling user does not have permission.

    .PARAMETER Database
        The database(s) to process. This list is auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        The database(s) to exclude. This list is auto-populated from the server.

    .PARAMETER BackupFileName
        The name of the file to backup to. This is only accepted for single database backups.
        If no name is specified then the backup files will be named DatabaseName_yyyyMMddHHmm (i.e. "Database1_201714022131") with the appropriate extension.

        If the same name is used repeatedly, SQL Server will add backups to the same file at an incrementing position.

        SQL Server needs permissions to write to the specified location. Path names are based on the SQL Server (C:\ is the C drive on the SQL Server, not the machine running the script).

        Passing in NUL as the BackupFileName will backup to the NUL: device

    .PARAMETER TimeStampFormat
        By default the command timestamps backups using the format yyyyMMddHHmm. Using this parameter this can be overridden. The timestamp format should be defined using the Get-Date formats, illegal formats will cause an error to be thrown

    .PARAMETER BackupDirectory
        Path in which to place the backup files. If not specified, the backups will be placed in the default backup location for SqlInstance.
        If multiple paths are specified, the backups will be striped across these locations. This will overwrite the FileCount option.

        If the path does not exist, Sql Server will attempt to create it. Folders are created by the Sql Instance, and checks will be made for write permissions.

        File Names with be suffixed with x-of-y to enable identifying striped sets, where y is the number of files in the set and x ranges from 1 to y.

    .PARAMETER ReplaceInName
        If this switch is set, the following list of strings will be replaced in the BackupFileName and BackupDirectory strings:
            instancename - will be replaced with the instance Name
            servername - will be replaced with the server name
            dbname - will be replaced with the database name
            timestamp - will be replaced with the timestamp (either the default, or the format provided)
            backuptype - will be replaced with Full, Log or Differential as appropriate

    .PARAMETER CopyOnly
        If this switch is enabled, CopyOnly backups will be taken. By default function performs a normal backup, these backups interfere with the restore chain of the database. CopyOnly backups will not interfere with the restore chain of the database.

        For more details please refer to this MSDN article - https://msdn.microsoft.com/en-us/library/ms191495.aspx

    .PARAMETER Type
        The type of SQL Server backup to perform. Accepted values are "Full", "Log", "Differential", "Diff", "Database"

    .PARAMETER FileCount
        This is the number of striped copies of the backups you wish to create.    This value is overwritten if you specify multiple Backup Directories.

    .PARAMETER CreateFolder
        If this switch is enabled, each database will be backed up into a separate folder on each of the paths specified by BackupDirectory.

    .PARAMETER CompressBackup
        If this switch is enabled, the function will try to perform a compressed backup if supported by the version and edition of SQL Server. Otherwise, this function will use the server(s) default setting for compression.

    .PARAMETER MaxTransferSize
        Sets the size of the unit of transfer. Values must be a multiple of 64kb.

    .PARAMETER Blocksize
        Specifies the block size to use. Must be one of 0.5KB, 1KB, 2KB, 4KB, 8KB, 16KB, 32KB or 64KB. This can be specified in bytes.
        Refer to https://msdn.microsoft.com/en-us/library/ms178615.aspx for more detail

    .PARAMETER BufferCount
        Number of I/O buffers to use to perform the operation.
        Refer to https://msdn.microsoft.com/en-us/library/ms178615.aspx for more detail

    .PARAMETER Checksum
        If this switch is enabled, the backup checksum will be calculated.

    .PARAMETER Verify
        If this switch is enabled, the backup will be verified by running a RESTORE VERIFYONLY against the SqlInstance

    .PARAMETER WithFormat
        Formats the media as the first step of the backup operation. NOTE: This will set Initialize and SkipTapeHeader to $true.

    .PARAMETER Initialize
        Initializes the media as part of the backup operation.

    .PARAMETER SkipTapeHeader
        Initializes the media as part of the backup operation.

    .PARAMETER InputObject
        Internal parameter

    .PARAMETER AzureBaseUrl
        The URL to the base container of an Azure Storage account to write backups to.

        If specified, the only other parameters than can be used are "NoCopyOnly", "Type", "CompressBackup", "Checksum", "Verify", "AzureCredential", "CreateFolder".

    .PARAMETER AzureCredential
        The name of the credential on the SQL instance that can write to the AzureBaseUrl, only needed if using Storage access keys
        If using SAS credentials, the command will look for a credential with a name matching the AzureBaseUrl

    .PARAMETER NoRecovery
        This is passed in to perform a tail log backup if needed

    .PARAMETER BuildPath
        By default this command will not attempt to create missing paths, this switch will change the behaviour so that it will

    .PARAMETER IgnoreFileChecks
        This switch stops the function from checking for the validity of paths. This can be useful if SQL Server only has read access to the backup area.
        Note, that as we cannot check the path you may well end up with errors.

    .PARAMETER OutputScriptOnly
        Switch causes only the T-SQL script for the backup to be generated. Will not create any paths if they do not exist

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .NOTES
        Tags: DisasterRecovery, Backup, Restore
        Author: Stuart Moore (@napalmgram), stuart-moore.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Backup-DbaDatabase -SqlInstance Server1 -Database HR, Finance

        This will perform a full database backup on the databases HR and Finance on SQL Server Instance Server1 to Server1 default backup directory.

    .EXAMPLE
        PS C:\> Backup-DbaDatabase -SqlInstance sql2016 -BackupDirectory C:\temp -Database AdventureWorks2014 -Type Full

        Backs up AdventureWorks2014 to sql2016 C:\temp folder.

    .EXAMPLE
        PS C:\> Backup-DbaDatabase -SqlInstance sql2016 -AzureBaseUrl https://dbatoolsaz.blob.core.windows.net/azbackups/ -AzureCredential dbatoolscred -Type Full -CreateFolder

        Performs a full backup of all databases on the sql2016 instance to their own containers under the https://dbatoolsaz.blob.core.windows.net/azbackups/ container on Azure blog storage using the sql credential "dbatoolscred" registered on the sql2016 instance.

    .EXAMPLE
        PS C:\> Backup-DbaDatabase -SqlInstance sql2016 -AzureBaseUrl https://dbatoolsaz.blob.core.windows.net/azbackups/  -Type Full

        Performs a full backup of all databases on the sql2016 instance to the https://dbatoolsaz.blob.core.windows.net/azbackups/ container on Azure blog storage using the Shared Access Signature sql credential "https://dbatoolsaz.blob.core.windows.net/azbackups" registered on the sql2016 instance.

    .EXAMPLE
        PS C:\> Backup-Dbadatabase -SqlInstance Server1\Prod -Database db1 -BackupDirectory \\filestore\backups\servername\instancename\dbname\backuptype -Type Full -ReplaceInName

        Performs a full backup of db1 into the folder \\filestore\backups\server1\prod\db1

    .EXAMPLE
        PS C:\> Backup-Dbadatabase -SqlInstance Server1\Prod -BackupDirectory \\filestore\backups\servername\instancename\dbname\backuptype -BackupFileName dbname-backuptype-timestamp.trn -Type Log -ReplaceInName

        Performs a log backup for every database. For the database db1 this would results in backup files in \\filestore\backups\server1\prod\db1\Log\db1-log-31102018.trn

    .EXAMPLE
        PS C:\> Backup-DbaDatabase -SqlInstance Sql2017 -Database master -BackupFileName NUL

        Performs a backup of master, but sends the output to the NUL device (ie; throws it away)
    #>
    [CmdletBinding(DefaultParameterSetName = "Default", SupportsShouldProcess)]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSAvoidUsingPlainTextForPassword", "")] #For AzureCredential
    param (
        [parameter(ParameterSetName = "Pipe", Mandatory)]
        [DbaInstanceParameter]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [string[]]$BackupDirectory,
        [string]$BackupFileName,
        [switch]$ReplaceInName,
        [switch]$CopyOnly,
        [ValidateSet('Full', 'Log', 'Differential', 'Diff', 'Database')]
        [string]$Type = 'Database',
        [parameter(ParameterSetName = "NoPipe", Mandatory, ValueFromPipeline)]
        [object[]]$InputObject,
        [switch]$CreateFolder,
        [int]$FileCount = 0,
        [switch]$CompressBackup,
        [switch]$Checksum,
        [switch]$Verify,
        [int]$MaxTransferSize,
        [int]$BlockSize,
        [int]$BufferCount,
        [string]$AzureBaseUrl,
        [string]$AzureCredential,
        [switch]$NoRecovery,
        [switch]$BuildPath,
        [switch]$WithFormat,
        [switch]$Initialize,
        [switch]$SkipTapeHeader,
        [string]$TimeStampFormat,
        [switch]$IgnoreFileChecks,
        [switch]$OutputScriptOnly,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        if (-not (Test-Bound 'TimeStampFormat')) {
            Write-Message -Message 'Setting Default timestampformat' -Level Verbose
            $TimeStampFormat = "yyyyMMddHHmm"
        }
        if ($SqlInstance.length -ne 0) {
            try {
                $Server = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential -AzureUnsupported
            } catch {
                Stop-Function -Message "Cannot connect to $SqlInstance" -ErrorRecord $_
                return
            }

            if ($Database) {
                $InputObject = $server.Databases | Where-Object Name -in $Database
            } else {
                $InputObject = $server.Databases | Where-Object Name -ne 'tempdb'
            }

            if ($ExcludeDatabase) {
                $InputObject = $InputObject | Where-Object Name -notin $ExcludeDatabase
            }

            if ($null -eq $BackupDirectory -and $backupfileName -ne 'NUL') {
                Write-Message -Message 'No backupfolder passed in, setting it to instance default' -Level Verbose
                $BackupDirectory = (Get-DbaDefaultPath -SqlInstance $SqlInstance).Backup
            }

            if ($BackupDirectory.Count -gt 1) {
                Write-Message -Level Verbose -Message "Multiple Backup Directories, striping"
                $Filecount = $BackupDirectory.Count
            }

            if ($InputObject.Count -gt 1 -and $BackupFileName -ne '' -and $True -ne $ReplaceInFile) {
                Stop-Function -Message "1 BackupFile specified, but more than 1 database."
                return
            }

            if (($MaxTransferSize % 64kb) -ne 0 -or $MaxTransferSize -gt 4mb) {
                Stop-Function -Message "MaxTransferSize value must be a multiple of 64kb and no greater than 4MB"
                return
            }
            if ($BlockSize) {
                if ($BlockSize -notin (0.5kb, 1kb, 2kb, 4kb, 8kb, 16kb, 32kb, 64kb)) {
                    Stop-Function -Message "Block size must be one of 0.5kb,1kb,2kb,4kb,8kb,16kb,32kb,64kb"
                    return
                }
            }
            if ('' -ne $AzureBaseUrl) {
                $AzureBaseUrl = $AzureBaseUrl.Trim("/")
                if ('' -ne $AzureCredential) {
                    Write-Message -Message "Azure Credential name passed in, will proceed assuming it's value" -Level Verbose
                    $FileCount = 1
                } else {
                    Write-Message -Message "AzureUrl and no credential, testing for SAS credential"
                    if (Get-DbaCredential -SqlInstance $server -Name $AzureBaseUrl) {
                        Write-Message -Message "Found a SAS backup credental" -Level Verbose
                    } else {
                        Stop-Function -Message "You must provide the credential name for the Azure Storage Account"
                        return
                    }
                }
                $BackupDirectory = $AzureBaseUrl
            }

            if ($OutputScriptOnly) {
                $IgnoreFileChecks = $true
            }
        }
    }

    process {
        if (!$SqlInstance -and !$InputObject) {
            Stop-Function -Message "You must specify a server and database or pipe some databases"
            return
        }

        Write-Message -Level Verbose -Message "$($InputObject.Count) database to backup"

        foreach ($Database in $InputObject) {
            $ProgressId = Get-Random
            $failures = @()
            $dbname = $Database.Name

            if ($dbname -eq "tempdb") {
                Stop-Function -Message "Backing up tempdb not supported" -Continue
            }

            if ('Normal' -notin ($Database.Status -split ',')) {
                Stop-Function -Message "Database status not Normal. $dbname skipped." -Continue
            }

            if ($Database.DatabaseSnapshotBaseName) {
                Stop-Function -Message "Backing up snapshots not supported. $dbname skipped." -Continue
            }

            if ($null -eq $server) { $server = $Database.Parent }

            Write-Message -Level Verbose -Message "Backup database $database"

            if ($null -eq $Database.RecoveryModel) {
                $Database.RecoveryModel = $server.Databases[$Database.Name].RecoveryModel
                Write-Message -Level Verbose -Message "$dbname is in $($Database.RecoveryModel) recovery model"
            }

            # Fixes one-off cases of StackOverflowException crashes, see issue 1481
            $dbRecovery = $Database.RecoveryModel.ToString()
            if ($dbRecovery -eq 'Simple' -and $Type -eq 'Log') {
                $failreason = "$database is in simple recovery mode, cannot take log backup"
                $failures += $failreason
                Write-Message -Level Warning -Message "$failreason"
            }

            $lastfull = $database.Refresh().LastBackupDate.Year

            if ($Type -notin @("Database", "Full") -and $lastfull -eq 1) {
                $failreason = "$database does not have an existing full backup, cannot take log or differentialbackup"
                $failures += $failreason
                Write-Message -Level Warning -Message "$failreason"
            }

            if ($CopyOnly -ne $true) {
                $CopyOnly = $false
            }

            $server.ConnectionContext.StatementTimeout = 0
            $backup = New-Object Microsoft.SqlServer.Management.Smo.Backup
            $backup.Database = $Database.Name
            $Suffix = "bak"

            if ($CompressBackup) {
                if ($database.EncryptionEnabled) {
                    Write-Message -Level Warning -Message "$dbname is enabled for encryption, will not compress"
                    $backup.CompressionOption = 2
                } elseif ($server.Edition -like 'Express*' -or ($server.VersionMajor -eq 10 -and $server.VersionMinor -eq 0 -and $server.Edition -notlike '*enterprise*') -or $server.VersionMajor -lt 10) {
                    Write-Message -Level Warning -Message "Compression is not supported with this version/edition of Sql Server"
                } else {
                    Write-Message -Level Verbose -Message "Compression enabled"
                    $backup.CompressionOption = 1
                }
            }

            if ($Checksum) {
                $backup.Checksum = $true
            }

            if ($Type -in 'Diff', 'Differential') {
                Write-Message -Level VeryVerbose -Message "Creating differential backup"
                $SMOBackuptype = "Database"
                $backup.Incremental = $true
                $outputType = 'Differential'
            }
            $Backup.NoRecovery = $false
            if ($Type -eq "Log") {
                Write-Message -Level VeryVerbose -Message "Creating log backup"
                $Suffix = "trn"
                $OutputType = 'Log'
                $SMOBackupType = 'Log'
                $Backup.NoRecovery = $NoRecovery
            }

            if ($Type -in 'Full', 'Database') {
                Write-Message -Level VeryVerbose -Message "Creating full backup"
                $SMOBackupType = "Database"
                $OutputType = 'Full'
            }

            $backup.CopyOnly = $copyonly
            $backup.Action = $SMOBackupType
            if ('' -ne $AzureBaseUrl -and $null -ne $AzureCredential) {
                $backup.CredentialName = $AzureCredential
            }

            Write-Message -Level Verbose -Message "Building file name"

            $BackupFinalName = ''
            $FinalBackupPath = @()
            $timestamp = Get-Date -Format $TimeStampFormat
            if ('NUL' -eq $BackupFileName) {
                $FinalBackupPath += 'NUL:'
                $IgnoreFileChecks = $true
            } elseif ('' -ne $BackupFileName) {
                $File = New-Object System.IO.FileInfo($BackupFileName)
                $BackupFinalName = $file.Name
                $suffix = $file.extension -Replace '^\.', ''
                if ( '' -ne (Split-Path $BackupFileName)) {
                    Write-Message -Level Verbose -Message "Fully qualified path passed in"
                    $FinalBackupPath += [IO.Path]::GetFullPath($file.DirectoryName)
                }
            } else {
                Write-Message -Level VeryVerbose -Message "Setting filename - $timestamp"
                $BackupFinalName = "$($dbname)_$timestamp.$suffix"
            }

            Write-Message -Level Verbose -Message "Building backup path"
            if ($FinalBackupPath.Count -eq 0) {
                $FinalBackupPath += $BackupDirectory
            }

            if ($BackupDirectory.Count -eq 1 -and $Filecount -gt 1) {
                for ($i = 0; $i -lt ($Filecount - 1); $i++) {
                    $FinalBackupPath += $FinalBackupPath[0]
                }
            }

            if ($AzureBaseUrl -or $AzureCredential) {
                $slash = "/"
            } else {
                $slash = "\"
            }
            if ($FinalBackupPath.Count -gt 1) {
                $File = New-Object System.IO.FileInfo($BackupFinalName)
                for ($i = 0; $i -lt $FinalBackupPath.Count; $i++) {
                    $FinalBackupPath[$i] = $FinalBackupPath[$i] + $slash + $($File.BaseName) + "-$($i+1)-of-$FileCount.$suffix"
                }
            } elseif ($FinalBackupPath[0] -ne 'NUL:') {
                $FinalBackupPath[0] = $FinalBackupPath[0] + $slash + $BackupFinalName
            }

            if ($CreateFolder -and $FinalBackupPath[0] -ne 'NUL:') {
                for ($i = 0; $i -lt $FinalBackupPath.Count; $i++) {
                    $parent = [IO.Path]::GetDirectoryName($FinalBackupPath[$i])
                    $leaf = [IO.Path]::GetFileName($FinalBackupPath[$i])
                    $FinalBackupPath[$i] = [IO.Path]::Combine($parent, $dbname, $leaf)
                }
            }

            if ($True -eq $ReplaceInName) {
                for ($i = 0; $i -lt $FinalBackupPath.count; $i++) {
                    $FinalBackupPath[$i] = $FinalBackupPath[$i] -replace ('dbname', $dbname)
                    $FinalBackupPath[$i] = $FinalBackupPath[$i] -replace ('instancename', $SqlInstance.InstanceName)
                    $FinalBackupPath[$i] = $FinalBackupPath[$i] -replace ('servername', $SqlInstance.ComputerName)
                    $FinalBackupPath[$i] = $FinalBackupPath[$i] -replace ('timestamp', $timestamp)
                    $FinalBackupPath[$i] = $FinalBackupPath[$i] -replace ('backuptype', $outputType)
                }
            }

            if (-not $IgnoreFileChecks -and -not $AzureBaseUrl) {
                $parentPaths = ($FinalBackupPath | ForEach-Object { Split-Path $_ } | Select-Object -Unique)
                foreach ($parentPath in $parentPaths) {
                    if (-not (Test-DbaPath -SqlInstance $server -Path $parentPath)) {
                        if (($BuildPath -eq $true) -or ($CreateFolder -eq $True)) {
                            $null = New-DbaDirectory -SqlInstance $server -Path $parentPath
                        } else {
                            $failreason += "SQL Server cannot check if $parentPath exists. You can try disabling this check with -IgnoreFileChecks"
                            $failures += $failreason
                            Write-Message -Level Warning -Message "$failreason"
                        }
                    }
                }
            }


            if ('' -eq $AzureBaseUrl -and $BackupDirectory) {
                $FinalBackupPath = $FinalBackupPath | ForEach-Object { [IO.Path]::GetFullPath($_) }
            }


            $script = $null
            $backupComplete = $false

            if (!$failures) {
                $Filecount = $FinalBackupPath.Count

                foreach ($backupfile in $FinalBackupPath) {
                    $device = New-Object Microsoft.SqlServer.Management.Smo.BackupDeviceItem
                    if ('' -ne $AzureBaseUrl) {
                        $device.DeviceType = "URL"
                    } else {
                        $device.DeviceType = "File"
                    }

                    if ($WithFormat) {
                        Write-Message -Message "WithFormat specified. Ensuring Initialize and SkipTapeHeader are set to true." -Level Verbose
                        $Initialize = $true
                        $SkipTapeHeader = $true
                    }

                    $backup.FormatMedia = $WithFormat
                    $backup.Initialize = $Initialize
                    $backup.SkipTapeHeader = $SkipTapeHeader
                    $device.Name = $backupfile
                    $backup.Devices.Add($device)
                }
                $humanBackupFile = $FinalBackupPath -Join ','
                Write-Message -Level Verbose -Message "Devices added"
                $percent = [Microsoft.SqlServer.Management.Smo.PercentCompleteEventHandler] {
                    Write-Progress -id $ProgressId -activity "Backing up database $dbname to $humanBackupFile" -percentcomplete $_.Percent -status ([System.String]::Format("Progress: {0} %", $_.Percent))
                }
                $backup.add_PercentComplete($percent)
                $backup.PercentCompleteNotification = 1
                $backup.add_Complete($complete)

                if ($MaxTransferSize) {
                    $backup.MaxTransferSize = $MaxTransferSize
                }
                if ($BufferCount) {
                    $backup.BufferCount = $BufferCount
                }
                if ($BlockSize) {
                    $backup.Blocksize = $BlockSize
                }

                Write-Progress -id $ProgressId -activity "Backing up database $dbname to $humanBackupFile" -percentcomplete 0 -status ([System.String]::Format("Progress: {0} %", 0))

                try {
                    if ($Pscmdlet.ShouldProcess($server.Name, "Backing up $dbname to $humanBackupFile")) {
                        $CurrentLsn = (Read-DbaTransactionLog -SqlInstance $server -Database $dbname -RowLimit 1).'Current LSN'
                        $NumericLSN = (Convert-DbaLSN -LSN $CurrentLsn).Numeric
                        if ($OutputScriptOnly -ne $True) {
                            $Filelist = @()
                            $FileList += $server.Databases[$dbname].FileGroups.Files | Select-Object @{ Name = "FileType"; Expression = { "D" } }, @{ Name = "Type"; Expression = { "D" } }, @{ Name = "LogicalName"; Expression = { $_.Name } }, @{ Name = "PhysicalName"; Expression = { $_.FileName } }
                            $FileList += $server.Databases[$dbname].LogFiles | Select-Object @{ Name = "FileType"; Expression = { "L" } }, @{ Name = "Type"; Expression = { "L" } }, @{ Name = "LogicalName"; Expression = { $_.Name } }, @{ Name = "PhysicalName"; Expression = { $_.FileName } }

                            $backup.SqlBackup($server)
                            $script = $backup.Script($server)
                            Write-Progress -id $ProgressId -activity "Backing up database $dbname to $backupfile" -status "Complete" -Completed
                            $BackupComplete = $true
                            if ($server.VersionMajor -eq '8') {
                                $HeaderInfo = Get-BackupAncientHistory -SqlInstance $server -Database $dbname
                            } else {
                                $HeaderInfo = Get-DbaBackupHistory -SqlInstance $server -Database $dbname -Last -IncludeCopyOnly -LastLsn $NumericLsn -RecoveryFork $database.RecoveryForkGuid  | Sort-Object -Property End -Descending | Select-Object -First 1
                            }
                            $Verified = $false
                            if ($Verify) {
                                $verifiedresult = [PSCustomObject]@{
                                    SqlInstance          = $server.name
                                    DatabaseName         = $dbname
                                    BackupComplete       = $BackupComplete
                                    BackupFilesCount     = $FinalBackupPath.Count
                                    BackupFile           = (Split-Path $FinalBackupPath -Leaf)
                                    BackupFolder         = (Split-Path $FinalBackupPath | Sort-Object -Unique)
                                    BackupPath           = ($FinalBackupPath | Sort-Object -Unique)
                                    Script               = $script
                                    Notes                = $failures -join (',')
                                    FullName             = ($FinalBackupPath | Sort-Object -Unique)
                                    FileList             = $FileList
                                    SoftwareVersionMajor = $server.VersionMajor
                                    Type                 = $outputType
                                    FirstLsn             = $HeaderInfo.FirstLsn
                                    DatabaseBackupLsn    = $HeaderInfo.DatabaseBackupLsn
                                    CheckPointLsn        = $HeaderInfo.CheckPointLsn
                                    LastLsn              = $HeaderInfo.LastLsn
                                    BackupSetId          = $HeaderInfo.BackupSetId
                                    LastRecoveryForkGUID = $HeaderInfo.LastRecoveryForkGUID
                                } | Restore-DbaDatabase -SqlInstance $server -DatabaseName DbaVerifyOnly -VerifyOnly -TrustDbBackupHistory -DestinationFilePrefix DbaVerifyOnly
                                if ($verifiedResult[0] -eq "Verify successful") {
                                    $failures += $verifiedResult[0]
                                    $Verified = $true
                                } else {
                                    $failures += $verifiedResult[0]
                                    $Verified = $false
                                }
                            }
                            $HeaderInfo | Add-Member -Type NoteProperty -Name BackupComplete -Value $BackupComplete
                            $HeaderInfo | Add-Member -Type NoteProperty -Name BackupFile -Value (Split-Path $FinalBackupPath -Leaf)
                            $HeaderInfo | Add-Member -Type NoteProperty -Name BackupFilesCount -Value $FinalBackupPath.Count
                            if ($FinalBackupPath[0] -eq 'NUL:') {
                                $pathresult = "NUL:"
                            } else {
                                $pathresult = (Split-Path $FinalBackupPath | Sort-Object -Unique)
                            }
                            $HeaderInfo | Add-Member -Type NoteProperty -Name BackupFolder -Value $pathresult
                            $HeaderInfo | Add-Member -Type NoteProperty -Name BackupPath -Value ($FinalBackupPath | Sort-Object -Unique)
                            $HeaderInfo | Add-Member -Type NoteProperty -Name DatabaseName -Value $dbname
                            $HeaderInfo | Add-Member -Type NoteProperty -Name Notes -Value ($failures -join (','))
                            $HeaderInfo | Add-Member -Type NoteProperty -Name Script -Value $script
                            $HeaderInfo | Add-Member -Type NoteProperty -Name Verified -Value $Verified
                        } else {
                            $backup.Script($server)
                        }
                    }
                } catch {
                    if ($NoRecovery -and ($_.Exception.InnerException.InnerException.InnerException -like '*cannot be opened. It is in the middle of a restore.')) {
                        Write-Message -Message "Exception thrown by db going into restoring mode due to recovery" -Leve Verbose
                    } else {
                        Write-Progress -id $ProgressId -activity "Backup" -status "Failed" -completed
                        Stop-Function -message "Backup Failed" -ErrorRecord $_ -Continue
                        $BackupComplete = $false
                    }
                }
            }
            $OutputExclude = 'FullName', 'FileList', 'SoftwareVersionMajor'
            if ($failures.Count -eq 0) {
                $OutputExclude += ('Notes', 'FirstLsn', 'DatabaseBackupLsn', 'CheckpointLsn', 'LastLsn', 'BackupSetId', 'LastRecoveryForkGuid')
            }
            $headerinfo | Select-DefaultView -ExcludeProperty $OutputExclude
            $BackupFileName = $null
        }
    }
}

tools\dbatools\functions\Backup-DbaDbCertificate.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Backup-DbaDbCertificate {
    <#
    .SYNOPSIS
        Exports database certificates from SQL Server using SMO.

    .DESCRIPTION
        Exports database certificates from SQL Server using SMO and outputs the .cer and .pvk files.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Certificate
        Exports certificate that matches the name(s).

    .PARAMETER Database
        Exports the encryptor for specific database(s).

    .PARAMETER ExcludeDatabase
        Database(s) to skip when exporting encryptors.

    .PARAMETER EncryptionPassword
        A string value that specifies the system path to encrypt the private key.

    .PARAMETER DecryptionPassword
        A string value that specifies the system path to decrypt the private key.

    .PARAMETER Path
        The path to output the files to. The path is relative to the SQL Server itself. If no path is specified, the default data directory will be used.

    .PARAMETER Suffix
        The suffix of the filename of the exported certificate.

    .PARAMETER InputObject
        Enables piping from Get-DbaDbCertificate

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .NOTES
        Tags: Migration, Certificate
        Author: Jess Pomfret (@jpomfret)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Backup-DbaDbCertificate -SqlInstance Server1

        Exports all the certificates on the specified SQL Server to the default data path for the instance.

    .EXAMPLE
        PS C:\> $cred = Get-Credential sqladmin
        PS C:\> Backup-DbaDbCertificate -SqlInstance Server1 -SqlCredential $cred

        Connects using sqladmin credential and exports all the certificates on the specified SQL Server to the default data path for the instance.

    .EXAMPLE
        PS C:\> Backup-DbaDbCertificate -SqlInstance Server1 -Certificate Certificate1

        Exports only the certificate named Certificate1 on the specified SQL Server to the default data path for the instance.

    .EXAMPLE
        PS C:\> Backup-DbaDbCertificate -SqlInstance Server1 -Database AdventureWorks

        Exports only the certificates for AdventureWorks on the specified SQL Server to the default data path for the instance.

    .EXAMPLE
        PS C:\> Backup-DbaDbCertificate -SqlInstance Server1 -ExcludeDatabase AdventureWorks

        Exports all certificates except those for AdventureWorks on the specified SQL Server to the default data path for the instance.

    .EXAMPLE
        PS C:\> Backup-DbaDbCertificate -SqlInstance Server1 -Path \\Server1\Certificates -EncryptionPassword (ConvertTo-SecureString -force -AsPlainText GoodPass1234!!)

        Exports all the certificates and private keys on the specified SQL Server.

    .EXAMPLE
        PS C:\> $EncryptionPassword = ConvertTo-SecureString -AsPlainText "GoodPass1234!!" -force
        PS C:\> $DecryptionPassword = ConvertTo-SecureString -AsPlainText "Password4567!!" -force
        PS C:\> Backup-DbaDbCertificate -SqlInstance Server1 -EncryptionPassword $EncryptionPassword -DecryptionPassword $DecryptionPassword

        Exports all the certificates on the specified SQL Server using the supplied DecryptionPassword, since an EncryptionPassword is specified private keys are also exported.

    .EXAMPLE
        PS C:\> Backup-DbaDbCertificate -SqlInstance Server1 -Path \\Server1\Certificates

        Exports all certificates on the specified SQL Server to the specified path.

    .EXAMPLE
        PS C:\> Backup-DbaDbCertificate -SqlInstance Server1 -Suffix DbaTools

        Exports all certificates on the specified SQL Server to the specified path, appends DbaTools to the end of the filenames.

    .EXAMPLE
        PS C:\> Get-DbaDbCertificate -SqlInstance sql2016 | Backup-DbaDbCertificate

        Exports all certificates found on sql2016 to the default data directory.

    #>
    [CmdletBinding(DefaultParameterSetName = "Default", SupportsShouldProcess, ConfirmImpact = 'Low')]
    param (
        [parameter(Mandatory, ParameterSetName = "instance")]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [parameter(ParameterSetName = "instance")]
        [object[]]$Certificate,
        [parameter(ParameterSetName = "instance")]
        [object[]]$Database,
        [parameter(ParameterSetName = "instance")]
        [object[]]$ExcludeDatabase,
        [Security.SecureString]$EncryptionPassword,
        [Security.SecureString]$DecryptionPassword,
        [System.IO.FileInfo]$Path,
        [string]$Suffix = "$(Get-Date -format 'yyyyMMddHHmmssms')",
        [parameter(ValueFromPipeline, ParameterSetName = "collection")]
        [Microsoft.SqlServer.Management.Smo.Certificate[]]$InputObject,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        if (-not $EncryptionPassword -and $DecryptionPassword) {
            Stop-Function -Message "If you specify a decryption password, you must also specify an encryption password" -Target $DecryptionPassword
        }

        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias Backup-DbaDatabaseCertificate

        function export-cert ($cert) {
            $certName = $cert.Name
            $db = $cert.Parent
            $server = $db.Parent
            $instance = $server.Name
            $actualPath = $Path

            if ($null -eq $actualPath) {
                $actualPath = Get-SqlDefaultPaths -SqlInstance $server -filetype Data
            }

            $actualPath = "$actualPath".TrimEnd('\')
            $fullCertName = "$actualPath\$certName$Suffix"
            $exportPathKey = "$fullCertName.pvk"

            if (!(Test-DbaPath -SqlInstance $server -Path $actualPath)) {
                Stop-Function -Message "$SqlInstance cannot access $actualPath" -Target $actualPath
            }

            if ($Pscmdlet.ShouldProcess($instance, "Exporting certificate $certName from $db on $instance to $actualPath")) {
                Write-Message -Level Verbose -Message "Exporting Certificate: $certName to $fullCertName"
                try {

                    $exportPathCert = "$fullCertName.cer"

                    # because the password shouldn't go to memory...
                    if ($EncryptionPassword.Length -gt 0 -and $DecryptionPassword.Length -gt 0) {

                        Write-Message -Level Verbose -Message "Both passwords passed in. Will export both cer and pvk."

                        $cert.export(
                            $exportPathCert,
                            $exportPathKey,
                            [System.Runtime.InteropServices.marshal]::PtrToStringAuto([System.Runtime.InteropServices.marshal]::SecureStringToBSTR($EncryptionPassword)),
                            [System.Runtime.InteropServices.marshal]::PtrToStringAuto([System.Runtime.InteropServices.marshal]::SecureStringToBSTR($DecryptionPassword))
                        )
                    } elseif ($EncryptionPassword.Length -gt 0 -and $DecryptionPassword.Length -eq 0) {
                        Write-Message -Level Verbose -Message "Only encryption password passed in. Will export both cer and pvk."

                        $cert.export(
                            $exportPathCert,
                            $exportPathKey,
                            [System.Runtime.InteropServices.marshal]::PtrToStringAuto([System.Runtime.InteropServices.marshal]::SecureStringToBSTR($EncryptionPassword))
                        )
                    } else {
                        Write-Message -Level Verbose -Message "No passwords passed in. Will export just cer."
                        $exportPathKey = "Password required to export key"
                        $cert.export($exportPathCert)
                    }

                    [pscustomobject]@{
                        ComputerName   = $server.ComputerName
                        InstanceName   = $server.ServiceName
                        SqlInstance    = $server.DomainInstanceName
                        Database       = $db.Name
                        Certificate    = $certName
                        Path           = $exportPathCert
                        Key            = $exportPathKey
                        ExportPath     = $exportPathCert
                        ExportKey      = $exportPathKey
                        exportPathCert = $exportPathCert
                        exportPathKey  = $exportPathKey
                        Status         = "Success"
                    } | Select-DefaultView -ExcludeProperty exportPathCert, exportPathKey, ExportPath, ExportKey
                } catch {

                    if ($_.Exception.InnerException) {
                        $exception = $_.Exception.InnerException.ToString() -Split "System.Data.SqlClient.SqlException: "
                        $exception = ($exception[1] -Split "at Microsoft.SqlServer.Management.Common.ConnectionManager")[0]
                    } else {
                        $exception = $_.Exception
                    }
                    [pscustomobject]@{
                        ComputerName   = $server.ComputerName
                        InstanceName   = $server.ServiceName
                        SqlInstance    = $server.DomainInstanceName
                        Database       = $db.Name
                        Certificate    = $certName
                        Path           = $exportPathCert
                        Key            = $exportPathKey
                        ExportPath     = $exportPathCert
                        ExportKey      = $exportPathKey
                        exportPathCert = $exportPathCert
                        exportPathKey  = $exportPathKey
                        Status         = "Failure: $exception"
                    } | Select-DefaultView -ExcludeProperty exportPathCert, exportPathKey, ExportPath, ExportKey
                    Stop-Function -Message "$certName from $db on $instance cannot be exported." -Continue -Target $cert -ErrorRecord $_
                }
            }
        }
    }

    process {
        if (Test-FunctionInterrupt) { return }

        if ($SqlInstance) {
            $InputObject += Get-DbaDbCertificate -SqlInstance $SqlInstance -SqlCredential $SqlCredential -Database $Database -ExcludeDatabase $ExcludeDatabase
        }

        foreach ($cert in $InputObject) {
            if ($cert.Name.StartsWith("##")) {
                Write-Message -Level Output -Message "Skipping system cert $cert"
            } else {
                export-cert $cert
            }
        }
    }
}

tools\dbatools\functions\Backup-DbaDbMasterKey.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Backup-DbaDbMasterKey {
    <#
    .SYNOPSIS
        Backs up specified database master key.

    .DESCRIPTION
        Backs up specified database master key.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Allows you to login to SQL Server using alternative credentials.

    .PARAMETER Database
        Backup master key from specific database(s).

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto-populated from the server.

    .PARAMETER Path
        The directory to export the key. If no path is specified, the default backup directory for the instance will be used.

    .PARAMETER Credential
        Pass a credential object for the password

    .PARAMETER SecurePassword
        The password to encrypt the exported key. This must be a SecureString.

    .PARAMETER InputObject
        Database object piped in from Get-DbaDatabase

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Certificate, Database
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Backup-DbaDbMasterKey -SqlInstance server1\sql2016
        ```
        ComputerName : SERVER1
        InstanceName : SQL2016
        SqlInstance  : SERVER1\SQL2016
        Database     : master
        Filename     : E:\MSSQL13.SQL2016\MSSQL\Backup\server1$sql2016-master-20170614162311.key
        Status       : Success
        ```

        Prompts for export password, then logs into server1\sql2016 with Windows credentials then backs up all database keys to the default backup directory.

    .EXAMPLE
        PS C:\> Backup-DbaDbMasterKey -SqlInstance Server1 -Database db1 -Path \\nas\sqlbackups\keys

        Logs into sql2016 with Windows credentials then backs up db1's keys to the \\nas\sqlbackups\keys directory.

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'Low')]
    param (
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [PSCredential]$Credential,
        [string[]]$Database,
        [string[]]$ExcludeDatabase,
        [Alias("Password")]
        [Security.SecureString]$SecurePassword,
        [string]$Path,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Database[]]$InputObject,
        [switch]$EnableException
    )
    begin {
        if ($Credential) {
            $SecurePassword = $Credential.Password
        }
    }
    process {
        foreach ($instance in $SqlInstance) {
            $InputObject += Get-DbaDatabase -SqlInstance $SqlInstance -SqlCredential $SqlCredential -Database $Database -ExcludeDatabase $ExcludeDatabase
        }

        foreach ($db in $InputObject) {
            $server = $db.Parent

            if (Test-Bound -ParameterName Path -Not) {
                $Path = $server.BackupDirectory
            }

            if (-not $Path) {
                Stop-Function -Message "Path discovery failed. Please explicitly specify -Path" -Target $server -Continue
            }

            if (!(Test-DbaPath -SqlInstance $server -Path $Path)) {
                Stop-Function -Message "$instance cannot access $Path" -Target $server -ErrorRecord $_ -Continue
            }

            if (!$db.IsAccessible) {
                Write-Message -Level Warning -Message "Database $db is not accessible. Skipping."
                continue
            }

            $masterkey = $db.MasterKey

            if (!$masterkey) {
                Write-Message -Message "No master key exists in the $db database on $instance" -Target $db -Level Verbose
                continue
            }

            # If you pass a password param, then you will not be prompted for each database, but it wouldn't be a good idea to build in insecurity
            if (-not $SecurePassword -and -not $Credential) {
                $SecurePassword = Read-Host -AsSecureString -Prompt "You must enter Service Key password for $instance"
                $SecurePassword2 = Read-Host -AsSecureString -Prompt "Type the password again"

                if (([System.Runtime.InteropServices.marshal]::PtrToStringAuto([System.Runtime.InteropServices.marshal]::SecureStringToBSTR($SecurePassword))) -ne ([System.Runtime.InteropServices.marshal]::PtrToStringAuto([System.Runtime.InteropServices.marshal]::SecureStringToBSTR($SecurePassword2)))) {
                    Stop-Function -Message "Passwords do not match" -Continue
                }
            }

            $time = (Get-Date -Format yyyMMddHHmmss)
            $dbname = $db.name
            $Path = $Path.TrimEnd("\")
            $fileinstance = $instance.ToString().Replace('\', '$')
            $filename = "$Path\$fileinstance-$dbname-$time.key"

            if ($Pscmdlet.ShouldProcess($instance, "Backing up master key to $filename")) {
                try {
                    $masterkey.Export($filename, [System.Runtime.InteropServices.marshal]::PtrToStringAuto([System.Runtime.InteropServices.marshal]::SecureStringToBSTR($SecurePassword)))
                    $status = "Success"
                } catch {
                    $status = "Failure"
                    Write-Message -Level Warning -Message "Backup failure: $($_.Exception.InnerException)"
                }

                Add-Member -Force -InputObject $masterkey -MemberType NoteProperty -Name ComputerName -value $server.ComputerName
                Add-Member -Force -InputObject $masterkey -MemberType NoteProperty -Name InstanceName -value $server.ServiceName
                Add-Member -Force -InputObject $masterkey -MemberType NoteProperty -Name SqlInstance -value $server.DomainInstanceName
                Add-Member -Force -InputObject $masterkey -MemberType NoteProperty -Name Database -value $dbname
                Add-Member -Force -InputObject $masterkey -MemberType NoteProperty -Name Filename -value $filename
                Add-Member -Force -InputObject $masterkey -MemberType NoteProperty -Name Status -value $status

                Select-DefaultView -InputObject $masterkey -Property ComputerName, InstanceName, SqlInstance, Database, 'Filename as Path', Status
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Backup-DbaDatabaseMasterKey
    }
}

tools\dbatools\bin\XEtemplates\Profiler Tuning.xml

<event_sessions xmlns="http://schemas.microsoft.com/sqlserver/2008/07/extendedeventconfig">
  <event_session name="Profiler Tuning" maxMemory="4" eventRetentionMode="allowSingleEventLoss" trackCausality="true" dispatchLatency="30" maxEventSize="0" memoryPartitionMode="none">
    <templateCategory>
      <!-- _locID_text="templateCategory" _locComment = "" -->Profiler Equivalents</templateCategory>
    <templateName>
      <!-- _locID_text = "templateName" _locComment = "" -->Profiler Tuning</templateName>
    <templateDescription>
      <!-- _locID_text = "templateDescription" _locComment = "" -->Matches the 'Tuning' template in Profiler. Captures information about stored procedures and Transact-SQL batch execution.</templateDescription>
    <event package="sqlserver" name="rpc_completed">
      <action package="sqlserver" name="database_id" />            
      <action package="sqlserver" name="database_name" />            
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="session_id" />                    
      <parameter name="collect_data_stream" value="1" />      
      <predicate>
        <and>
          <leaf>
            <comparator name="greater_than_uint64" package="package0"></comparator>
            <global name="database_id" package="sqlserver"></global>
            <value>4</value>
          </leaf>
          <leaf>
            <comparator name="equal_boolean" package="package0"></comparator>
            <global name="is_system" package="sqlserver"></global>
            <value>false</value>
          </leaf>
        </and>
      </predicate>
    </event>
    <event package="sqlserver" name="sp_statement_completed">
      <action package="sqlserver" name="database_id" />            
      <action package="sqlserver" name="database_name" />            
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="session_id" />                    
      <predicate>
        <and>
          <leaf>
            <comparator name="greater_than_uint64" package="package0"></comparator>
            <global name="database_id" package="sqlserver"></global>
            <value>4</value>
          </leaf>
          <leaf>
            <comparator name="equal_boolean" package="package0"></comparator>
            <global name="is_system" package="sqlserver"></global>
            <value>false</value>
          </leaf>
        </and>
      </predicate>
    </event>
    <event package="sqlserver" name="sql_batch_completed">
      <action package="sqlserver" name="database_id" />            
      <action package="sqlserver" name="database_name" />            
      <action package="sqlserver" name="server_principal_name" />
      <action package="sqlserver" name="session_id" />                    
      <predicate>
        <and>
          <leaf>
            <comparator name="greater_than_uint64" package="package0"></comparator>
            <global name="database_id" package="sqlserver"></global>
            <value>4</value>
          </leaf>
          <leaf>
            <comparator name="equal_boolean" package="package0"></comparator>
            <global name="is_system" package="sqlserver"></global>
            <value>false</value>
          </leaf>
        </and>
      </predicate>
    </event>
  </event_session>
</event_sessions>

tools\dbatools\bin\XEtemplates\Queries and Resources.xml

<event_sessions xmlns="http://schemas.microsoft.com/sqlserver/2008/07/extendedeventconfig">
   <event_session name="Queries and Resources" maxMemory="4" eventRetentionMode="allowSingleEventLoss" trackCausality="true" dispatchLatency="30" maxEventSize="0" memoryPartitionMode="none">
    <templateCategory>
      <!-- _locID_text="templateCategory" _locComment = "" -->Everyday Extended Events</templateCategory>
    <templateName>
      <!-- _locID_text = "templateName" _locComment = "" -->Queries and Resources</templateName>
    <templateDescription>
      <!-- _locID_text = "templateDescription" _locComment = "" -->Captures query activity.</templateDescription>
      <event package="sqlserver" name="rpc_completed">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="database_id" />
         <action package="sqlserver" name="query_hash" />
         <action package="sqlserver" name="session_id" />
         <parameter name="collect_statement" value="1" />
         <predicate>
            <and>
               <leaf>
                  <comparator name="greater_than_uint64" package="package0" />
                  <global name="database_id" package="sqlserver" />
                  <value>4</value>
               </leaf>
               <leaf>
                  <comparator name="equal_boolean" package="package0" />
                  <global name="is_system" package="sqlserver" />
                  <value>false</value>
               </leaf>
            </and>
         </predicate>
      </event>
      <event package="sqlserver" name="sp_statement_completed">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="database_id" />
         <action package="sqlserver" name="query_hash" />
         <action package="sqlserver" name="query_plan_hash" />
         <action package="sqlserver" name="session_id" />
         <parameter name="collect_object_name" value="1" />
         <predicate>
            <and>
               <leaf>
                  <comparator name="greater_than_uint64" package="package0" />
                  <global name="database_id" package="sqlserver" />
                  <value>4</value>
               </leaf>
               <leaf>
                  <comparator name="equal_boolean" package="package0" />
                  <global name="is_system" package="sqlserver" />
                  <value>false</value>
               </leaf>
            </and>
         </predicate>
      </event>
      <event package="sqlserver" name="sql_batch_completed">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="database_id" />
         <action package="sqlserver" name="query_hash" />
         <action package="sqlserver" name="session_id" />
         <predicate>
            <and>
               <leaf>
                  <comparator name="greater_than_uint64" package="package0" />
                  <global name="database_id" package="sqlserver" />
                  <value>4</value>
               </leaf>
               <leaf>
                  <comparator name="equal_boolean" package="package0" />
                  <global name="is_system" package="sqlserver" />
                  <value>false</value>
               </leaf>
            </and>
         </predicate>
      </event>
      <event package="sqlserver" name="sql_statement_completed">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="database_id" />
         <action package="sqlserver" name="query_hash" />
         <action package="sqlserver" name="query_plan_hash" />
         <action package="sqlserver" name="session_id" />
         <predicate>
            <and>
               <leaf>
                  <comparator name="greater_than_uint64" package="package0" />
                  <global name="database_id" package="sqlserver" />
                  <value>4</value>
               </leaf>
               <leaf>
                  <comparator name="equal_boolean" package="package0" />
                  <global name="is_system" package="sqlserver" />
                  <value>false</value>
               </leaf>
            </and>
         </predicate>
      </event>
      <target package="package0" name="event_file">
         <parameter name="filename" value="capture_queries_and_resources" />
         <parameter name="max_rollover_files" value="0" />
      </target>
      <target package="package0" name="ring_buffer">
         <parameter name="max_memory" value="1048576" />
      </target>
   </event_session>
</event_sessions>

tools\dbatools\functions\Clear-DbaPlanCache.ps1

function Clear-DbaPlanCache {
    <#
    .SYNOPSIS
        Removes ad-hoc and prepared plan caches is single use plans are over defined threshold.

    .DESCRIPTION
        Checks ad-hoc and prepared plan cache for each database, if over 100 MBs removes from the cache.

        This command automates that process.

        References: https://www.sqlskills.com/blogs/kimberly/plan-cache-adhoc-workloads-and-clearing-the-single-use-plan-cache-bloat/

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Threshold
        Memory used threshold.

    .PARAMETER InputObject
        Enables results to be piped in from Get-DbaPlanCache.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Memory
        Author: Tracy Boggiano, databasesuperhero.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Clear-DbaPlanCache

    .EXAMPLE
        PS C:\> Clear-DbaPlanCache -SqlInstance sql2017 -Threshold 200

        Logs into the SQL Server instance "sql2017" and removes plan caches if over 200 MB.

    .EXAMPLE
        PS C:\> Clear-DbaPlanCache -SqlInstance sql2017 -SqlCredential sqladmin

        Logs into the SQL instance using the SQL Login 'sqladmin' and then Windows instance as 'ad\sqldba'
        and removes if Threshold over 100 MB.

    .EXAMPLE
        PS C:\> Find-DbaInstance -ComputerName localhost | Get-DbaPlanCache | Clear-DbaPlanCache -Threshold 200

        Scans localhost for instances using the browser service, traverses all instances and gets the plan cache for each, clears them out if they are above 200 MB.
    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [Alias("ServerInstance", "SqlServer", "SqlServers")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [int]$Threshold = 100,
        [parameter(ValueFromPipeline)]
        [object[]]$InputObject,
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            $InputObject += Get-DbaPlanCache -SqlInstance $instance -SqlCredential $SqlCredential
        }

        foreach ($result in $InputObject) {
            if ($result.MB -ge $Threshold) {
                if ($Pscmdlet.ShouldProcess($($result.SqlInstance), "Cleared SQL Plans plan cache")) {
                    try {
                        $server = Connect-SqlInstance -SqlInstance $result.SqlInstance -SqlCredential $SqlCredential
                    } catch {
                        Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
                    }

                    $server.Query("DBCC FREESYSTEMCACHE('SQL Plans')")
                    [PSCustomObject]@{
                        ComputerName = $result.ComputerName
                        InstanceName = $result.InstanceName
                        SqlInstance  = $result.SqlInstance
                        Size         = $result.Size
                        Status       = "Plan cache cleared"
                    }
                }
            } else {
                if ($Pscmdlet.ShouldProcess($($result.SqlInstance), "Results $($result.Size) below threshold")) {
                    [PSCustomObject]@{
                        ComputerName = $result.ComputerName
                        InstanceName = $result.InstanceName
                        SqlInstance  = $result.SqlInstance
                        Size         = $result.Size
                        Status       = "Plan cache size below threshold ($Threshold) "
                    }
                    Write-Message -Level Verbose -Message "Plan cache size below threshold ($Threshold) "
                }
            }
        }
    }
}

tools\dbatools\bin\XEtemplates\Query Batch Sampling.xml

<event_sessions xmlns="http://schemas.microsoft.com/sqlserver/2008/07/extendedeventconfig">
  <event_session name="Query Batch Sampling" maxMemory="4" eventRetentionMode="allowSingleEventLoss" trackCausality="true" dispatchLatency="30" maxEventSize="0" memoryPartitionMode="none">
    <templateCategory>
      <!-- _locID_text="templateCategory" _locComment = "" -->Query Execution</templateCategory>
    <templateName>
      <!-- _locID_text = "templateName" _locComment = "" -->Query Batch Sampling</templateName>
    <templateDescription>
      <!-- _locID_text = "templateDescription" _locComment = "" -->Collects batch and RPC level statements as well as error information. You can use this template to understand the flow of queries that are executing on your system and track errors back to the queries that caused them. Events are only collected from 20% of the active sessions on the server at any given time. You can change the sampling rate by modifying the filter for the event session.</templateDescription>
    <event package="sqlserver" name="error_reported">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="query_hash" />
      <action package="sqlserver" name="session_id" />
      <predicate>
        <and>
            <leaf>
              <comparator name="divides_by_uint64" package="package0"></comparator>
              <global name="session_id" package="sqlserver"></global>
              <value>5</value>
            </leaf>
            <leaf>
              <comparator name="greater_than_uint64" package="package0"></comparator>
              <global name="database_id" package="sqlserver"></global>
              <value>4</value>
            </leaf>
        </and>
      </predicate>
    </event>
    <event package="sqlserver" name="rpc_completed">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="query_hash" />
      <action package="sqlserver" name="session_id" />
      <predicate>
        <and>
			<leaf>
			  <comparator name="divides_by_uint64" package="package0"></comparator>
			  <global name="session_id" package="sqlserver"></global>
			  <value>5</value>
			</leaf>
			<leaf>
			  <comparator name="greater_than_uint64" package="package0"></comparator>
			  <global name="database_id" package="sqlserver"></global>
			  <value>4</value>
			</leaf>
		</and>
      </predicate>
    </event>
    <event package="sqlserver" name="sql_batch_completed">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="query_hash" />
      <action package="sqlserver" name="session_id" />
      <predicate>
        <and>
			 <leaf>
			  <comparator name="divides_by_uint64" package="package0"></comparator>
			  <global name="session_id" package="sqlserver"></global>
			  <value>5</value>
			</leaf>
			<leaf>
			  <comparator name="greater_than_uint64" package="package0"></comparator>
			  <global name="database_id" package="sqlserver"></global>
			  <value>4</value>
			</leaf>
        </and>
      </predicate>
    </event>
    <target package="package0" name="ring_buffer" />
  </event_session>
</event_sessions>

tools\dbatools\bin\XEtemplates\Connection Tracking.xml

<event_sessions xmlns="http://schemas.microsoft.com/sqlserver/2008/07/extendedeventconfig">
  <event_session name="Connection Tracking" maxMemory="4" eventRetentionMode="allowSingleEventLoss" trackCausality="true" dispatchLatency="30" maxEventSize="0" memoryPartitionMode="none">
    <templateCategory>
      <!-- _locID_text="templateCategory" _locComment = "" -->System Monitoring</templateCategory>
    <templateName>
      <!-- _locID_text = "templateName" _locComment = "" -->Connection Tracking</templateName>
    <templateDescription>
      <!-- _locID_text = "templateDescription" _locComment = "" -->Tracks connection activity for a server. Normal connection activity is tracked using the login and logout events</templateDescription>
    <event package="sqlserver" name="login">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_connection_id" />
      <action package="sqlserver" name="client_hostname" />
      <action package="sqlserver" name="context_info" />
      <parameter name="collect_options_text" value="1" />
    </event>
    <event package="sqlserver" name="logout">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="client_connection_id" />
      <action package="sqlserver" name="client_hostname" />
      <action package="sqlserver" name="context_info" />
      <action package="sqlserver" name="session_id" />
    </event>
    <target package="package0" name="ring_buffer" />
  </event_session>
</event_sessions>

tools\dbatools\bin\XEtemplates\Count Query Locks.xml

<event_sessions xmlns="http://schemas.microsoft.com/sqlserver/2008/07/extendedeventconfig">
  <event_session name="Count Query Locks" maxMemory="4" eventRetentionMode="allowSingleEventLoss" trackCausality="true" dispatchLatency="30" maxEventSize="0" memoryPartitionMode="none">
    <templateCategory>
      <!-- _locID_text="templateCategory" _locComment = "" -->Locks and Blocks</templateCategory>
    <templateName>
      <!-- _locID_text = "templateName" _locComment = "" -->Count Query Locks</templateName>
    <templateDescription>
      <!-- _locID_text = "templateDescription" _locComment = "" -->Counts the number of locks acquired by each query based on the query_hash value. You can use this template to identify the most lock intensive queries for investigation and tuning.</templateDescription>
    <event package="sqlserver" name="lock_acquired">
      <action package="sqlserver" name="query_hash" />
      <predicate>
        <and>
          <leaf>
            <comparator name="greater_than_uint64" package="package0"></comparator>
            <event name="lock_acquired" package="sqlserver" field="database_id"></event>
            <value>4</value>
          </leaf>
          <leaf>
            <comparator name="equal_boolean" package="package0"></comparator>
            <global name="is_system" package="sqlserver"></global>
            <value>false</value>
          </leaf>
        </and>
      </predicate>
    </event>
    <target package="package0" name="histogram">
      <parameter name="filtering_event_name" value="sqlserver.lock_acquired" />
      <parameter name="source" value="sqlserver.query_hash" />
    </target>
  </event_session>
</event_sessions>

tools\dbatools\bin\XEtemplates\Database File IO.xml

<event_sessions xmlns="http://schemas.microsoft.com/sqlserver/2008/07/extendedeventconfig">
   <event_session name="Database File I/O" maxMemory="4" eventRetentionMode="allowSingleEventLoss" trackCausality="false" dispatchLatency="30" maxEventSize="0" memoryPartitionMode="none">
    <templateCategory>
      <!-- _locID_text="templateCategory" _locComment = "" -->Everyday Extended Events</templateCategory>
    <templateName>
      <!-- _locID_text = "templateName" _locComment = "" -->Database File IO</templateName>
    <templateDescription>
      <!-- _locID_text = "templateDescription" _locComment = "" -->Use event counter and histogram to see which database file(s) have the most reads and writes.</templateDescription>
      <event package="sqlserver" name="file_read_completed">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="client_hostname" />
         <action package="sqlserver" name="database_id" />
         <action package="sqlserver" name="database_name" />
         <action package="sqlserver" name="plan_handle" />
         <action package="sqlserver" name="sql_text" />
         <parameter name="collect_io_data" value="1" />
         <parameter name="collect_path" value="1" />
         <predicate>
            <leaf>
               <comparator name="greater_than_uint64" package="package0" />
               <global name="database_id" package="sqlserver" />
               <value>4</value>
            </leaf>
         </predicate>
      </event>
      <event package="sqlserver" name="file_write_completed">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="client_hostname" />
         <action package="sqlserver" name="database_id" />
         <action package="sqlserver" name="database_name" />
         <action package="sqlserver" name="plan_handle" />
         <action package="sqlserver" name="sql_text" />
         <parameter name="collect_path" value="1" />
         <predicate>
            <leaf>
               <comparator name="greater_than_uint64" package="package0" />
               <global name="database_id" package="sqlserver" />
               <value>4</value>
            </leaf>
         </predicate>
      </event>
      <target package="package0" name="event_counter" />
      <target package="package0" name="histogram">
         <parameter name="filtering_event_name" value="sqlserver.file_read_completed" />
         <parameter name="source" value="file_id" />
         <parameter name="source_type" value="0" />
      </target>
   </event_session>
</event_sessions>

tools\dbatools\bin\XEtemplates\Database Health 2012.xml

<event_sessions xmlns="http://schemas.microsoft.com/sqlserver/2008/07/extendedeventsconfig">
   <event_session name="Database Health 2012" maxMemory="4" eventRetentionMode="allowMultipleEventLoss" trackCausality="true" dispatchLatency="30" maxEventSize="0" memoryPartitionMode="perNode">
   <templateCategory>
      <!-- _locID_text="templateCategory" _locComment = "" -->Performance Store</templateCategory>
    <templateName>
      <!-- _locID_text = "templateName" _locComment = "" -->Database Health 2012</templateName>
    <templateDescription>
      <!-- _locID_text = "templateDescription" _locComment = "" -->Similar to system_health but for SQL Server 2012 databases by Ola Hallengren. This Extended Event captures most of the valuable data for troubleshooting such as deadlocks, blocking processes, slow statements, errors, file size changes, info for tempdb troubleshooting etc. To capture blocking processes, configure blocked threshold (Set-DbaSpConfigure -SqlInstance sql2017 -ConfigName BlockedProcessThreshold -Value 5)</templateDescription>
      <event package="sqlos" name="wait_info">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="client_hostname" />
         <action package="sqlserver" name="client_pid" />
         <action package="sqlserver" name="database_id" />
         <action package="sqlserver" name="database_name" />
         <action package="sqlserver" name="nt_username" />
         <action package="sqlserver" name="plan_handle" />
         <action package="sqlserver" name="query_hash_signed" />
         <action package="sqlserver" name="query_plan_hash_signed" />
         <action package="sqlserver" name="request_id" />
         <action package="sqlserver" name="session_id" />
         <action package="sqlserver" name="session_resource_group_id" />
         <action package="sqlserver" name="transaction_id" />
         <action package="sqlserver" name="tsql_frame" />
         <action package="sqlserver" name="username" />
         <predicate>
            <and>
               <and>
                  <and>
                     <and>
                        <and>
                           <and>
                              <and>
                                 <leaf>
                                    <comparator name="equal_uint64" package="package0" />
                                    <event name="wait_info" package="sqlos" field="opcode" />
                                    <value>1</value>
                                 </leaf>
                                 <leaf>
                                    <comparator name="equal_boolean" package="package0" />
                                    <global name="is_system" package="sqlserver" />
                                    <value>false</value>
                                 </leaf>
                              </and>
                              <leaf>
                                 <comparator name="greater_than_equal_uint64" package="package0" />
                                 <event name="wait_info" package="sqlos" field="duration" />
                                 <value>5000</value>
                              </leaf>
                           </and>
                           <leaf>
                              <comparator name="not_equal_uint64" package="package0" />
                              <event name="wait_info" package="sqlos" field="wait_type" />
                              <value>225</value>
                           </leaf>
                        </and>
                        <leaf>
                           <comparator name="not_equal_uint64" package="package0" />
                           <event name="wait_info" package="sqlos" field="wait_type" />
                           <value>223</value>
                        </leaf>
                     </and>
                     <leaf>
                        <comparator name="not_equal_uint64" package="package0" />
                        <event name="wait_info" package="sqlos" field="wait_type" />
                        <value>377</value>
                     </leaf>
                  </and>
                  <leaf>
                     <comparator name="not_equal_uint64" package="package0" />
                     <event name="wait_info" package="sqlos" field="wait_type" />
                     <value>645</value>
                  </leaf>
               </and>
               <leaf>
                  <comparator name="not_equal_uint64" package="package0" />
                  <event name="wait_info" package="sqlos" field="wait_type" />
                  <value>738</value>
               </leaf>
            </and>
         </predicate>
      </event>
      <event package="sqlos" name="wait_info_external">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="client_hostname" />
         <action package="sqlserver" name="client_pid" />
         <action package="sqlserver" name="database_id" />
         <action package="sqlserver" name="database_name" />
         <action package="sqlserver" name="nt_username" />
         <action package="sqlserver" name="plan_handle" />
         <action package="sqlserver" name="query_hash_signed" />
         <action package="sqlserver" name="query_plan_hash_signed" />
         <action package="sqlserver" name="request_id" />
         <action package="sqlserver" name="session_id" />
         <action package="sqlserver" name="session_resource_group_id" />
         <action package="sqlserver" name="transaction_id" />
         <action package="sqlserver" name="tsql_frame" />
         <action package="sqlserver" name="username" />
         <predicate>
            <and>
               <and>
                  <leaf>
                     <comparator name="equal_uint64" package="package0" />
                     <event name="wait_info_external" package="sqlos" field="opcode" />
                     <value>1</value>
                  </leaf>
                  <leaf>
                     <comparator name="equal_boolean" package="package0" />
                     <global name="is_system" package="sqlserver" />
                     <value>false</value>
                  </leaf>
               </and>
               <leaf>
                  <comparator name="greater_than_equal_uint64" package="package0" />
                  <event name="wait_info_external" package="sqlos" field="duration" />
                  <value>5000</value>
               </leaf>
            </and>
         </predicate>
      </event>
      <event package="sqlserver" name="blocked_process_report" />
      <event package="sqlserver" name="database_file_size_change">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="client_hostname" />
         <action package="sqlserver" name="client_pid" />
         <action package="sqlserver" name="nt_username" />
         <action package="sqlserver" name="plan_handle" />
         <action package="sqlserver" name="request_id" />
         <action package="sqlserver" name="session_id" />
         <action package="sqlserver" name="session_resource_group_id" />
         <action package="sqlserver" name="transaction_id" />
         <action package="sqlserver" name="username" />
         <parameter name="collect_database_name" value="1" />
      </event>
      <event package="sqlserver" name="error_reported">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="client_hostname" />
         <action package="sqlserver" name="client_pid" />
         <action package="sqlserver" name="database_id" />
         <action package="sqlserver" name="database_name" />
         <action package="sqlserver" name="nt_username" />
         <action package="sqlserver" name="plan_handle" />
         <action package="sqlserver" name="request_id" />
         <action package="sqlserver" name="session_id" />
         <action package="sqlserver" name="session_resource_group_id" />
         <action package="sqlserver" name="transaction_id" />
         <action package="sqlserver" name="tsql_frame" />
         <action package="sqlserver" name="username" />
         <predicate>
            <leaf>
               <comparator name="greater_than_int64" package="package0" />
               <event name="error_reported" package="sqlserver" field="severity" />
               <value>10</value>
            </leaf>
         </predicate>
      </event>
      <event package="sqlserver" name="module_end">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="client_hostname" />
         <action package="sqlserver" name="client_pid" />
         <action package="sqlserver" name="database_id" />
         <action package="sqlserver" name="database_name" />
         <action package="sqlserver" name="nt_username" />
         <action package="sqlserver" name="plan_handle" />
         <action package="sqlserver" name="request_id" />
         <action package="sqlserver" name="session_id" />
         <action package="sqlserver" name="session_resource_group_id" />
         <action package="sqlserver" name="transaction_id" />
         <action package="sqlserver" name="tsql_frame" />
         <action package="sqlserver" name="username" />
         <predicate>
            <and>
               <leaf>
                  <comparator name="equal_boolean" package="package0" />
                  <global name="is_system" package="sqlserver" />
                  <value>false</value>
               </leaf>
               <leaf>
                  <comparator name="greater_than_equal_uint64" package="package0" />
                  <event name="module_end" package="sqlserver" field="duration" />
                  <value>5000000</value>
               </leaf>
            </and>
         </predicate>
      </event>
      <event package="sqlserver" name="rpc_completed">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="client_hostname" />
         <action package="sqlserver" name="client_pid" />
         <action package="sqlserver" name="database_id" />
         <action package="sqlserver" name="database_name" />
         <action package="sqlserver" name="nt_username" />
         <action package="sqlserver" name="request_id" />
         <action package="sqlserver" name="session_id" />
         <action package="sqlserver" name="session_resource_group_id" />
         <action package="sqlserver" name="transaction_id" />
         <action package="sqlserver" name="username" />
         <predicate>
            <and>
               <leaf>
                  <comparator name="equal_boolean" package="package0" />
                  <global name="is_system" package="sqlserver" />
                  <value>false</value>
               </leaf>
               <or>
                  <leaf>
                     <comparator name="greater_than_equal_uint64" package="package0" />
                     <event name="rpc_completed" package="sqlserver" field="duration" />
                     <value>5000000</value>
                  </leaf>
                  <leaf>
                     <comparator name="not_equal_uint64" package="package0" />
                     <event name="rpc_completed" package="sqlserver" field="result" />
                     <value>0</value>
                  </leaf>
               </or>
            </and>
         </predicate>
      </event>
      <event package="sqlserver" name="sql_batch_completed">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="client_hostname" />
         <action package="sqlserver" name="client_pid" />
         <action package="sqlserver" name="database_id" />
         <action package="sqlserver" name="database_name" />
         <action package="sqlserver" name="nt_username" />
         <action package="sqlserver" name="request_id" />
         <action package="sqlserver" name="session_id" />
         <action package="sqlserver" name="session_resource_group_id" />
         <action package="sqlserver" name="transaction_id" />
         <action package="sqlserver" name="username" />
         <parameter name="collect_batch_text" value="1" />
         <predicate>
            <and>
               <leaf>
                  <comparator name="equal_boolean" package="package0" />
                  <global name="is_system" package="sqlserver" />
                  <value>false</value>
               </leaf>
               <or>
                  <leaf>
                     <comparator name="greater_than_equal_uint64" package="package0" />
                     <event name="sql_batch_completed" package="sqlserver" field="duration" />
                     <value>5000000</value>
                  </leaf>
                  <leaf>
                     <comparator name="not_equal_uint64" package="package0" />
                     <event name="sql_batch_completed" package="sqlserver" field="result" />
                     <value>0</value>
                  </leaf>
               </or>
            </and>
         </predicate>
      </event>
      <event package="sqlserver" name="xml_deadlock_report" />
      <target package="package0" name="event_file">
         <parameter name="filename" value="Database Health 2012" />
         <parameter name="max_file_size" value="5" />
         <parameter name="max_rollover_files" value="100" />
      </target>
   </event_session>
</event_sessions>

tools\dbatools\functions\configuration\Register-DbatoolsConfig.ps1

function Register-DbatoolsConfig
{
<#
    .SYNOPSIS
        Registers an existing configuration object in registry.
    
    .DESCRIPTION
        Registers an existing configuration object in registry.
        This allows simple persisting of settings across powershell consoles.
        It also can be used to generate a registry template, which can then be used to create policies.
    
    .PARAMETER Config
        The configuration object to write to registry.
        Can be retrieved using Get-DbatoolsConfig.
    
    .PARAMETER FullName
        The full name of the setting to be written to registry.
    
    .PARAMETER Module
        The name of the module, whose settings should be written to registry.
    
    .PARAMETER Name
        Default: "*"
        Used in conjunction with the -Module parameter to restrict the number of configuration items written to registry.
    
    .PARAMETER Scope
        Default: UserDefault
        Who will be affected by this export how? Current user or all? Default setting or enforced?
        Legal values: UserDefault, UserMandatory, SystemDefault, SystemMandatory
    
    .PARAMETER EnableException
        This parameters disables user-friendly warnings and enables the throwing of exceptions.
        This is less user friendly, but allows catching exceptions in calling scripts.
    
    .EXAMPLE
        PS C:\> Get-DbatoolsConfig message.style.* | Register-DbatoolsConfig
    
        Retrieves all configuration items that that start with message.style. and registers them in registry for the current user.
    
    .EXAMPLE
        PS C:\> Register-DbatoolsConfig -FullName "message.consoleoutput.disable" -Scope SystemDefault
    
        Retrieves the configuration item "message.consoleoutput.disable" and registers it in registry as the default setting for all users on this machine.
    
    .EXAMPLE
        PS C:\> Register-DbatoolsConfig -Module Message -Scope SystemMandatory
    
        Retrieves all configuration items of the module Message, then registers them in registry to enforce them for all users on the current system.
#>
    [CmdletBinding(DefaultParameterSetName = "Default")]
    Param (
        [Parameter(ParameterSetName = "Default", Position = 0, ValueFromPipeline = $true)]
        [Sqlcollaborative.Dbatools.Configuration.Config[]]
        $Config,
        
        [Parameter(ParameterSetName = "Default", Position = 0, ValueFromPipeline = $true)]
        [string[]]
        $FullName,
        
        [Parameter(Mandatory = $true, ParameterSetName = "Name", Position = 0)]
        [string]
        $Module,
        
        [Parameter(ParameterSetName = "Name", Position = 1)]
        [string]
        $Name = "*",
        
        [Sqlcollaborative.Dbatools.Configuration.ConfigScope]
        $Scope = "UserDefault",
        
        [switch]
        $EnableException
    )
    
    begin
    {
        if ($script:NoRegistry -and ($Scope -band 14))
        {
            Stop-Function -Message "Cannot register configurations on non-windows machines to registry. Please specify a file-based scope" -Tag 'NotSupported' -Category NotImplemented
            return
        }
        
        # Linux and MAC default to local user store file
        if ($script:NoRegistry -and ($Scope -eq "UserDefault"))
        {
            $Scope = [Sqlcollaborative.Dbatools.Configuration.ConfigScope]::FileUserLocal
        }
        # Linux and MAC get redirection for SystemDefault to FileSystem
        if ($script:NoRegistry -and ($Scope -eq "SystemDefault"))
        {
            $Scope = [Sqlcollaborative.Dbatools.Configuration.ConfigScope]::FileSystem
        }
        
        $parSet = $PSCmdlet.ParameterSetName
        
        function Write-Config
        {
            [CmdletBinding()]
            Param (
                [Sqlcollaborative.Dbatools.Configuration.Config]
                $Config,
                
                [Sqlcollaborative.Dbatools.Configuration.ConfigScope]
                $Scope,
                
                [bool]
                $EnableException,
                
                [string]
                $FunctionName = (Get-PSCallStack)[0].Command
            )
            
            if (-not $Config -or ($Config.RegistryData -eq "<type not supported>"))
            {
                Stop-Function -Message "Invalid Input, cannot export $($Config.FullName), type not supported" -EnableException $EnableException -Category InvalidArgument -Tag "config", "fail" -Target $Config -FunctionName $FunctionName
                return
            }
            
            try
            {
                Write-Message -Level Verbose -Message "Registering $($Config.FullName) for $Scope" -Tag "Config" -Target $Config -FunctionName $FunctionName
                #region User Default
                if (1 -band $Scope)
                {
                    Ensure-RegistryPath -Path $script:path_RegistryUserDefault -ErrorAction Stop
                    Set-ItemProperty -Path $script:path_RegistryUserDefault -Name $Config.FullName -Value $Config.RegistryData -ErrorAction Stop
                }
                #endregion User Default
                
                #region User Mandatory
                if (2 -band $Scope)
                {
                    Ensure-RegistryPath -Path $script:path_RegistryUserEnforced -ErrorAction Stop
                    Set-ItemProperty -Path $script:path_RegistryUserEnforced -Name $Config.FullName -Value $Config.RegistryData -ErrorAction Stop
                }
                #endregion User Mandatory
                
                #region System Default
                if (4 -band $Scope)
                {
                    Ensure-RegistryPath -Path $script:path_RegistryMachineDefault -ErrorAction Stop
                    Set-ItemProperty -Path $script:path_RegistryMachineDefault -Name $Config.FullName -Value $Config.RegistryData -ErrorAction Stop
                }
                #endregion System Default
                
                #region System Mandatory
                if (8 -band $Scope)
                {
                    Ensure-RegistryPath -Path $script:path_RegistryMachineEnforced -ErrorAction Stop
                    Set-ItemProperty -Path $script:path_RegistryMachineEnforced -Name $Config.FullName -Value $Config.RegistryData -ErrorAction Stop
                }
                #endregion System Mandatory
            }
            catch
            {
                Stop-Function -Message "Failed to export $($Config.FullName), to scope $Scope" -EnableException $EnableException -Tag "config", "fail" -Target $Config -ErrorRecord $_ -FunctionName $FunctionName
                return
            }
        }
        
        function Ensure-RegistryPath
        {
            [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseApprovedVerbs", "")]
            [CmdletBinding()]
            Param (
                [string]
                $Path
            )
            
            if (-not (Test-Path $Path))
            {
                $null = New-Item $Path -Force
            }
        }
        
        # For file based persistence
        $configurationItems = @()
    }
    process
    {
        if (Test-FunctionInterrupt) { return }
        
        #region Registry Based
        if ($Scope -band 15)
        {
            switch ($parSet)
            {
                "Default"
                {
                    foreach ($item in $Config)
                    {
                        Write-Config -Config $item -Scope $Scope -EnableException $EnableException
                    }
                    
                    foreach ($item in $FullName)
                    {
                        if ([Sqlcollaborative.Dbatools.Configuration.ConfigurationHost]::Configurations.ContainsKey($item.ToLower()))
                        {
                            Write-Config -Config ([Sqlcollaborative.Dbatools.Configuration.ConfigurationHost]::Configurations[$item.ToLower()]) -Scope $Scope -EnableException $EnableException
                        }
                    }
                }
                "Name"
                {
                    foreach ($item in ([Sqlcollaborative.Dbatools.Configuration.ConfigurationHost]::Configurations.Values | Where-Object Module -EQ $Module | Where-Object Name -Like $Name))
                    {
                        Write-Config -Config $item -Scope $Scope -EnableException $EnableException
                    }
                }
            }
        }
        #endregion Registry Based
        
        #region File Based
        else
        {
            switch ($parSet)
            {
                "Default"
                {
                    foreach ($item in $Config)
                    {
                        if ($configurationItems.FullName -notcontains $item.FullName) { $configurationItems += $item }
                    }
                    
                    foreach ($item in $FullName)
                    {
                        if (($configurationItems.FullName -notcontains $item) -and ([Sqlcollaborative.Dbatools.Configuration.ConfigurationHost]::Configurations.ContainsKey($item.ToLower())))
                        {
                            $configurationItems += [Sqlcollaborative.Dbatools.Configuration.ConfigurationHost]::Configurations[$item.ToLower()]
                        }
                    }
                }
                "Name"
                {
                    foreach ($item in ([Sqlcollaborative.Dbatools.Configuration.ConfigurationHost]::Configurations.Values | Where-Object Module -EQ $Module | Where-Object Name -Like $Name))
                    {
                        if ($configurationItems.FullName -notcontains $item.FullName) { $configurationItems += $item }
                    }
                }
            }
        }
        #endregion File Based
    }
    end
    {
        if (Test-FunctionInterrupt) { return }
        
        #region Finish File Based Persistence
        if ($Scope -band 16)
        {
            Write-DbatoolsConfigFile -Config $configurationItems -Path (Join-Path $script:path_FileUserLocal "psf_config.json")
        }
        if ($Scope -band 32)
        {
            Write-DbatoolsConfigFile -Config $configurationItems -Path (Join-Path $script:path_FileUserShared "psf_config.json")
        }
        if ($Scope -band 64)
        {
            Write-DbatoolsConfigFile -Config $configurationItems -Path (Join-Path $script:path_FileSystem "psf_config.json")
        }
        #endregion Finish File Based Persistence
    }
}

tools\dbatools\functions\configuration\Reset-DbatoolsConfig.ps1

function Reset-DbatoolsConfig
{
<#
    .SYNOPSIS
        Reverts a configuration item to its default value.
    
    .DESCRIPTION
        This command can be used to revert a configuration item to the value it was initialized with.
        Generally, this amounts to reverting it to its default value.
        
        In order for a reset to be possible, two conditions must be met:
        - The setting must have been initialized.
        - The setting cannot have been enforced by policy.
    
    .PARAMETER ConfigurationItem
        A configuration object as returned by Get-DbatoolsConfig.
    
    .PARAMETER FullName
        The full name of the setting to reset, offering the maximum of precision.
    
    .PARAMETER Module
        The name of the module, from which configurations should be reset.
        Used in conjunction with the -Name parameter to filter a specific set of items.
    
    .PARAMETER Name
        Used in conjunction with the -Module parameter to select which settings to reset using wildcard comparison.
    
    .PARAMETER EnableException
        This parameters disables user-friendly warnings and enables the throwing of exceptions.
        This is less user friendly, but allows catching exceptions in calling scripts.
    
    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.
    
    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.
    
    .EXAMPLE
        PS C:\> Reset-DbatoolsConfig -Module MyModule
    
        Resets all configuration items of the MyModule to default.
    
    .EXAMPLE
        PS C:\> Get-DbatoolsConfig | Reset-DbatoolsConfig
    
        Resets ALL configuration items to default.
    
    .EXAMPLE
        PS C:\> Reset-DbatoolsConfig -FullName MyModule.Group.Setting1
    
        Resets the configuration item named 'MyModule.Group.Setting1'.
#>
    [CmdletBinding(DefaultParameterSetName = 'Pipeline')]
    param (
        [Parameter(ValueFromPipeline = $true, ParameterSetName = 'Pipeline')]
        [Sqlcollaborative.Dbatools.Configuration.Config[]]
        $ConfigurationItem,
        
        [Parameter(ValueFromPipeline = $true, ParameterSetName = 'Pipeline')]
        [string[]]
        $FullName,
        
        [Parameter(Mandatory = $true, ParameterSetName = 'Module')]
        [string]
        $Module,
        
        [Parameter(ParameterSetName = 'Module')]
        [string]
        $Name = "*",
        
        [switch]
        $EnableException
    )
    
    process
    {
        #region By configuration Item
        foreach ($item in $ConfigurationItem)
        {
            if ($PSCmdlet.ShouldProcess($item.FullName, 'Reset to default value'))
            {
                try { $item.ResetValue() }
                catch { Stop-Function -Message "Failed to reset the configuration item." -ErrorRecord $_ -Continue -EnableException $EnableException }
            }
        }
        #endregion By configuration Item
        
        #region By FullName
        foreach ($nameItem in $FullName)
        {
            # The configuration items themselves can be cast to string, so they need to be filtered out,
            # otherwise on bind they would execute for this code-path as well.
            if ($nameItem -ceq "Sqlcollaborative.Dbatools.Configuration.Config") { continue }
            
            foreach ($item in (Get-DbatoolsConfig -FullName $nameItem))
            {
                if ($PSCmdlet.ShouldProcess($item.FullName, 'Reset to default value'))
                {
                    try { $item.ResetValue() }
                    catch { Stop-Function -Message "Failed to reset the configuration item." -ErrorRecord $_ -Continue -EnableException $EnableException }
                }
            }
        }
        #endregion By FullName
        if ($Module)
        {
            foreach ($item in (Get-DbatoolsConfig -Module $Module -Name $Name))
            {
                if ($PSCmdlet.ShouldProcess($item.FullName, 'Reset to default value'))
                {
                    try { $item.ResetValue() }
                    catch { Stop-Function -Message "Failed to reset the configuration item." -ErrorRecord $_ -Continue -EnableException $EnableException }
                }
            }
        }
    }
}

tools\dbatools\functions\configuration\Unregister-DbatoolsConfig.ps1

function Unregister-DbatoolsConfig
{
<#
    .SYNOPSIS
        Removes registered configuration settings.
    
    .DESCRIPTION
        Removes registered configuration settings.
        This function can be used to remove settings that have been persisted for either user or computer.
    
        Note: This command has no effect on configuration setings currently in memory.
    
    .PARAMETER ConfigurationItem
        A configuration object as returned by Get-DbatoolsConfig.
    
    .PARAMETER FullName
        The full name of the configuration setting to purge.
    
    .PARAMETER Module
        The module, amongst which settings should be unregistered.
    
    .PARAMETER Name
        The name of the setting to unregister.
        For use together with the module parameter, to limit the amount of settings that are unregistered.
    
    .PARAMETER Scope
        Settings can be set to either default or enforced, for user or the entire computer.
        By default, only DefaultSettings for the user are unregistered.
        Use this parameter to choose the actual scope for the command to process.
    
    .EXAMPLE
        PS C:\> Get-DbatoolsConfig | Unregister-DbatoolsConfig
    
        Completely removes all registered configurations currently loaded in memory.
        In most cases, this will mean removing all registered configurations.
    
    .EXAMPLE
        PS C:\> Unregister-DbatoolsConfig -Scope SystemDefault -FullName 'MyModule.Path.DefaultExport'
    
        Unregisters the setting 'MyModule.Path.DefaultExport' from the list of computer-wide defaults.
        Note: Changing system wide settings requires running the console with elevation.
    
    .EXAMPLE
        PS C:\> Unregister-DbatoolsConfig -Module MyModule
    
        Unregisters all configuration settings for the module MyModule.
#>
    [CmdletBinding(DefaultParameterSetName = 'Pipeline')]
    param (
        [Parameter(ValueFromPipeline = $true, ParameterSetName = 'Pipeline')]
        [Sqlcollaborative.Dbatools.Configuration.Config[]]
        $ConfigurationItem,
        
        [Parameter(ValueFromPipeline = $true, ParameterSetName = 'Pipeline')]
        [string[]]
        $FullName,
        
        [Parameter(Mandatory = $true, ParameterSetName = 'Module')]
        [string]
        $Module,
        
        [Parameter(ParameterSetName = 'Module')]
        [string]
        $Name = "*",
        
        [Sqlcollaborative.Dbatools.Configuration.ConfigScope]
        $Scope = "UserDefault"
    )
    
    begin
    {
        if (($PSVersionTable.PSVersion.Major -ge 6) -and ($PSVersionTable.OS -notlike "*Windows*") -and ($Scope -band 15))
        {
            Stop-Function -Message "Cannot unregister configurations from registry on non-windows machines." -Tag 'NotSupported' -Category ResourceUnavailable
            return
        }
        
        #region Initialize Collection
        $registryProperties = @()
        if ($Scope -band 1)
        {
            if (Test-Path $script:path_RegistryUserDefault) { $registryProperties += Get-ItemProperty -Path $script:path_RegistryUserDefault }
        }
        if ($Scope -band 2)
        {
            if (Test-Path $script:path_RegistryUserEnforced) { $registryProperties += Get-ItemProperty -Path $script:path_RegistryUserEnforced }
        }
        if ($Scope -band 4)
        {
            if (Test-Path $script:path_RegistryMachineDefault) { $registryProperties += Get-ItemProperty -Path $script:path_RegistryMachineDefault }
        }
        if ($Scope -band 8)
        {
            if (Test-Path $script:path_RegistryMachineEnforced) { $registryProperties += Get-ItemProperty -Path $script:path_RegistryMachineEnforced }
        }
        $pathProperties = @()
        if ($Scope -band 16)
        {
            $fileUserLocalSettings = @()
            if (Test-Path (Join-Path $script:path_FileUserLocal "psf_config.json")) { $fileUserLocalSettings = Get-Content (Join-Path $script:path_FileUserLocal "psf_config.json") -Encoding UTF8 | ConvertFrom-Json }
            if ($fileUserLocalSettings)
            {
                $pathProperties += [pscustomobject]@{
                    Path       = (Join-Path $script:path_FileUserLocal "psf_config.json")
                    Properties = $fileUserLocalSettings
                    Changed    = $false
                }
            }
        }
        if ($Scope -band 32)
        {
            $fileUserSharedSettings = @()
            if (Test-Path (Join-Path $script:path_FileUserShared "psf_config.json")) { $fileUserSharedSettings = Get-Content (Join-Path $script:path_FileUserShared "psf_config.json") -Encoding UTF8 | ConvertFrom-Json }
            if ($fileUserSharedSettings)
            {
                $pathProperties += [pscustomobject]@{
                    Path       = (Join-Path $script:path_FileUserShared "psf_config.json")
                    Properties = $fileUserSharedSettings
                    Changed    = $false
                }
            }
        }
        if ($Scope -band 64)
        {
            $fileSystemSettings = @()
            if (Test-Path (Join-Path $script:path_FileSystem "psf_config.json")) { $fileSystemSettings = Get-Content (Join-Path $script:path_FileSystem "psf_config.json") -Encoding UTF8 | ConvertFrom-Json }
            if ($fileSystemSettings)
            {
                $pathProperties += [pscustomobject]@{
                    Path       = (Join-Path $script:path_FileSystem "psf_config.json")
                    Properties = $fileSystemSettings
                    Changed    = $false
                }
            }
        }
        #endregion Initialize Collection
        
        $common = 'PSPath', 'PSParentPath', 'PSChildName', 'PSDrive', 'PSProvider'
    }
    process
    {
        if (Test-FunctionInterrupt) { return }
        # Silently skip since no action necessary
        if (-not ($pathProperties -or $registryProperties)) { return }
        
        foreach ($item in $ConfigurationItem)
        {
            # Registry
            foreach ($hive in ($registryProperties | Where-Object { $_.PSObject.Properties.Name -eq $item.FullName }))
            {
                Remove-ItemProperty -Path $hive.PSPath -Name $item.FullName
            }
            # Prepare file
            foreach ($fileConfig in ($pathProperties | Where-Object { $_.Properties.FullName -contains $item.FullName }))
            {
                $fileConfig.Properties = $fileConfig.Properties | Where-Object FullName -NE $item.FullName
                $fileConfig.Changed = $true
            }
        }
        
        foreach ($item in $FullName)
        {
            # Ignore string-casted configurations
            if ($item -ceq "Sqlcollaborative.Dbatools.Configuration.Config") { continue }
            
            # Registry
            foreach ($hive in ($registryProperties | Where-Object { $_.PSObject.Properties.Name -eq $item }))
            {
                Remove-ItemProperty -Path $hive.PSPath -Name $item
            }
            # Prepare file
            foreach ($fileConfig in ($pathProperties | Where-Object { $_.Properties.FullName -contains $item }))
            {
                $fileConfig.Properties = $fileConfig.Properties | Where-Object FullName -NE $item
                $fileConfig.Changed = $true
            }
        }
        
        if ($Module)
        {
            $compoundName = "{0}.{1}" -f $Module, $Name
            
            # Registry
            foreach ($hive in ($registryProperties | Where-Object { $_.PSObject.Properties.Name -like $compoundName }))
            {
                foreach ($propName in $hive.PSObject.Properties.Name)
                {
                    if ($propName -in $common) { continue }
                    
                    if ($propName -like $compoundName)
                    {
                        Remove-ItemProperty -Path $hive.PSPath -Name $propName
                    }
                }
            }
            # Prepare file
            foreach ($fileConfig in ($pathProperties | Where-Object { $_.Properties.FullName -like $compoundName }))
            {
                $fileConfig.Properties = $fileConfig.Properties | Where-Object FullName -NotLike $compoundName
                $fileConfig.Changed = $true
            }
        }
    }
    end
    {
        if (Test-FunctionInterrupt) { return }
        
        foreach ($fileConfig in $pathProperties)
        {
            if (-not $fileConfig.Changed) { continue }
            
            if ($fileConfig.Properties)
            {
                $fileConfig.Properties | ConvertTo-Json | Set-Content -Path $fileConfig.Path -Encoding UTF8
            }
            else
            {
                Remove-Item $fileConfig.Path
            }
        }
    }
}

tools\dbatools\functions\Connect-DbaInstance.ps1

function Connect-DbaInstance {
    <#
    .SYNOPSIS
        Creates a robust SMO SQL Server object.

    .DESCRIPTION
        This command is robust because it initializes properties that do not cause enumeration by default. It also supports both Windows and SQL Server authentication methods, and detects which to use based upon the provided credentials.

        By default, this command also sets the connection's ApplicationName property  to "dbatools PowerShell module - dbatools.io - custom connection". If you're doing anything that requires profiling, you can look for this client name.

        Alternatively, you can pass in whichever client name you'd like using the -ClientName parameter. There are a ton of other parameters for you to explore as well.

        See https://msdn.microsoft.com/en-us/library/system.data.sqlclient.sqlconnection.connectionstring.aspx
        and https://msdn.microsoft.com/en-us/library/system.data.sqlclient.sqlconnectionstringbuilder.aspx,
        and https://msdn.microsoft.com/en-us/library/system.data.sqlclient.sqlconnection.aspx

        To execute SQL commands, you can use $server.ConnectionContext.ExecuteReader($sql) or $server.Databases['master'].ExecuteNonQuery($sql)

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Credential object used to connect to the SQL Server Instance as a different user. This can be a Windows or SQL Server account. Windows users are determined by the existence of a backslash, so if you are intending to use an alternative Windows connection instead of a SQL login, ensure it contains a backslash.

    .PARAMETER Database
        The database(s) to process. This list is auto-populated from the server.

    .PARAMETER AccessToken
        Gets or sets the access token for the connection.

    .PARAMETER AppendConnectionString
        Appends to the current connection string. Note that you cannot pass authentication information using this method. Use -SqlInstance and optionally -SqlCredential to set authentication information.

    .PARAMETER ApplicationIntent
        Declares the application workload type when connecting to a server.

        Valid values are "ReadOnly" and "ReadWrite".

    .PARAMETER BatchSeparator
        A string to separate groups of SQL statements being executed. By default, this is "GO".

    .PARAMETER ClientName
        By default, this command sets the client's ApplicationName property to "dbatools PowerShell module - dbatools.io - custom connection" if you're doing anything that requires profiling, you can look for this client name. Using -ClientName allows you to set your own custom client application name.

    .PARAMETER ConnectTimeout
        The length of time (in seconds) to wait for a connection to the server before terminating the attempt and generating an error.

        Valid values are integers between 0 and 2147483647.

        When opening a connection to a Azure SQL Database, set the connection timeout to 30 seconds.

    .PARAMETER EncryptConnection
        If this switch is enabled, SQL Server uses SSL encryption for all data sent between the client and server if the server has a certificate installed.

        For more information, see Connection String Syntax. https://docs.microsoft.com/en-us/dotnet/framework/data/adonet/connection-string-syntax

        Beginning in .NET Framework 4.5, when TrustServerCertificate is false and Encrypt is true, the server name (or IP address) in a SQL Server SSL certificate must exactly match the server name (or IP address) specified in the connection string. Otherwise, the connection attempt will fail. For information about support for certificates whose subject starts with a wildcard character (*), see Accepted wildcards used by server certificates for server authentication. https://support.microsoft.com/en-us/help/258858/accepted-wildcards-used-by-server-certificates-for-server-authenticati

    .PARAMETER FailoverPartner
        The name of the failover partner server where database mirroring is configured.

        If the value of this key is "" (an empty string), then Initial Catalog must be present in the connection string, and its value must not be "".

        The server name can be 128 characters or less.

        If you specify a failover partner but the failover partner server is not configured for database mirroring and the primary server (specified with the Server keyword) is not available, then the connection will fail.

        If you specify a failover partner and the primary server is not configured for database mirroring, the connection to the primary server (specified with the Server keyword) will succeed if the primary server is available.

    .PARAMETER LockTimeout
        Sets the time in seconds required for the connection to time out when the current transaction is locked.

    .PARAMETER MaxPoolSize
        Sets the maximum number of connections allowed in the connection pool for this specific connection string.

    .PARAMETER MinPoolSize
        Sets the minimum number of connections allowed in the connection pool for this specific connection string.

    .PARAMETER MultipleActiveResultSets
        If this switch is enabled, an application can maintain multiple active result sets (MARS).

        If this switch is not enabled, an application must process or cancel all result sets from one batch before it can execute any other batch on that connection.

    .PARAMETER MultiSubnetFailover
        If this switch is enabled, and your application is connecting to an AlwaysOn availability group (AG) on different subnets, detection of and connection to the currently active server will be faster. For more information about SqlClient support for Always On Availability Groups, see https://docs.microsoft.com/en-us/dotnet/framework/data/adonet/sql/sqlclient-support-for-high-availability-disaster-recovery

    .PARAMETER NetworkProtocol
        Explicitly sets the network protocol used to connect to the server.

        Valid values are "TcpIp","NamedPipes","Multiprotocol","AppleTalk","BanyanVines","Via","SharedMemory" and "NWLinkIpxSpx"

    .PARAMETER NonPooledConnection
        If this switch is enabled, a non-pooled connection will be requested.

    .PARAMETER PacketSize
        Sets the size in bytes of the network packets used to communicate with an instance of SQL Server. Must match at server.

    .PARAMETER PooledConnectionLifetime
        When a connection is returned to the pool, its creation time is compared with the current time and the connection is destroyed if that time span (in seconds) exceeds the value specified by Connection Lifetime. This is useful in clustered configurations to force load balancing between a running server and a server just brought online.

        A value of zero (0) causes pooled connections to have the maximum connection timeout.

    .PARAMETER SqlExecutionModes
        The SqlExecutionModes enumeration contains values that are used to specify whether the commands sent to the referenced connection to the server are executed immediately or saved in a buffer.

        Valid values include "CaptureSql", "ExecuteAndCaptureSql" and "ExecuteSql".

    .PARAMETER StatementTimeout
        Sets the number of seconds a statement is given to run before failing with a timeout error.

    .PARAMETER TrustServerCertificate
        When this switch is enabled, the channel will be encrypted while bypassing walking the certificate chain to validate trust.

    .PARAMETER WorkstationId
        Sets the name of the workstation connecting to SQL Server.

    .PARAMETER SqlConnectionOnly
        Instead of returning a rich SMO server object, this command will only return a SqlConnection object when setting this switch.

    .PARAMETER DisableException
        By default in most of our commands, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.

        This command, however, gifts you  with "sea of red" exceptions, by default, because it is useful for advanced scripting.

        Using this switch turns our "nice by default" feature on which makes errors into pretty warnings.

    .NOTES
        Tags: Connect, Connection
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Connect-DbaInstance

    .EXAMPLE
        PS C:\> Connect-DbaInstance -SqlInstance sql2014

        Creates an SMO Server object that connects using Windows Authentication

    .EXAMPLE
        PS C:\> $wincred = Get-Credential ad\sqladmin
        PS C:\> Connect-DbaInstance -SqlInstance sql2014 -SqlCredential $wincred

        Creates an SMO Server object that connects using alternative Windows credentials

    .EXAMPLE
        PS C:\> $sqlcred = Get-Credential sqladmin
        PS C:\> $server = Connect-DbaInstance -SqlInstance sql2014 -SqlCredential $sqlcred

        Login to sql2014 as SQL login sqladmin.

    .EXAMPLE
        PS C:\> $server = Connect-DbaInstance -SqlInstance sql2014 -ClientName "my connection"

        Creates an SMO Server object that connects using Windows Authentication and uses the client name "my connection". So when you open up profiler or use extended events, you can search for "my connection".

    .EXAMPLE
        PS C:\> $server = Connect-DbaInstance -SqlInstance sql2014 -AppendConnectionString "Packet Size=4096;AttachDbFilename=C:\MyFolder\MyDataFile.mdf;User Instance=true;"

        Creates an SMO Server object that connects to sql2014 using Windows Authentication, then it sets the packet size (this can also be done via -PacketSize) and other connection attributes.

    .EXAMPLE
        PS C:\> $server = Connect-DbaInstance -SqlInstance sql2014 -NetworkProtocol TcpIp -MultiSubnetFailover

        Creates an SMO Server object that connects using Windows Authentication that uses TCP/IP and has MultiSubnetFailover enabled.

    .EXAMPLE
        PS C:\> $server = Connect-DbaInstance sql2016 -ApplicationIntent ReadOnly

        Connects with ReadOnly ApplicationIntent.

    #>
    [CmdletBinding()]
    param (
        [Parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [object[]]$Database,
        [string]$AccessToken,
        [ValidateSet('ReadOnly', 'ReadWrite')]
        [string]$ApplicationIntent,
        [string]$BatchSeparator,
        [string]$ClientName = "dbatools PowerShell module - dbatools.io - custom connection",
        [int]$ConnectTimeout = ([Sqlcollaborative.Dbatools.Connection.ConnectionHost]::SqlConnectionTimeout),
        [switch]$EncryptConnection,
        [string]$FailoverPartner,
        [int]$LockTimeout,
        [int]$MaxPoolSize,
        [int]$MinPoolSize,
        [switch]$MultipleActiveResultSets,
        [switch]$MultiSubnetFailover,
        [ValidateSet('TcpIp', 'NamedPipes', 'Multiprotocol', 'AppleTalk', 'BanyanVines', 'Via', 'SharedMemory', 'NWLinkIpxSpx')]
        [string]$NetworkProtocol,
        [switch]$NonPooledConnection,
        [int]$PacketSize,
        [int]$PooledConnectionLifetime,
        [ValidateSet('CaptureSql', 'ExecuteAndCaptureSql', 'ExecuteSql')]
        [string]$SqlExecutionModes,
        [int]$StatementTimeout,
        [switch]$TrustServerCertificate,
        [string]$WorkstationId,
        [string]$AppendConnectionString,
        [switch]$SqlConnectionOnly,
        [switch]$DisableException
    )
    begin {
        if ($DisableException) {
            $EnableException = $false
        } else {
            $EnableException = $true
        }

        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Connect-DbaServer
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Get-DbaInstance

        $loadedSmoVersion = [AppDomain]::CurrentDomain.GetAssemblies() | Where-Object {
            $_.Fullname -like "Microsoft.SqlServer.SMO,*"
        }

        if ($loadedSmoVersion) {
            $loadedSmoVersion = $loadedSmoVersion | ForEach-Object {
                if ($_.Location -match "__") {
                    ((Split-Path (Split-Path $_.Location) -Leaf) -split "__")[0]
                } else {
                    ((Get-ChildItem -Path $_.Location).VersionInfo.ProductVersion)
                }
            }
        }
        #'PrimaryFilePath' seems the culprit for slow SMO on databases
        $Fields2000_Db = 'Collation', 'CompatibilityLevel', 'CreateDate', 'ID', 'IsAccessible', 'IsFullTextEnabled', 'IsSystemObject', 'IsUpdateable', 'LastBackupDate', 'LastDifferentialBackupDate', 'LastLogBackupDate', 'Name', 'Owner', 'ReadOnly', 'RecoveryModel', 'ReplicationOptions', 'Status', 'Version'
        $Fields200x_Db = $Fields2000_Db + @('BrokerEnabled', 'DatabaseSnapshotBaseName', 'IsMirroringEnabled', 'Trustworthy')
        $Fields201x_Db = $Fields200x_Db + @('ActiveConnections', 'AvailabilityDatabaseSynchronizationState', 'AvailabilityGroupName', 'ContainmentType', 'EncryptionEnabled')

        $Fields2000_Login = 'CreateDate', 'DateLastModified', 'DefaultDatabase', 'DenyWindowsLogin', 'IsSystemObject', 'Language', 'LanguageAlias', 'LoginType', 'Name', 'Sid', 'WindowsLoginAccessType'
        $Fields200x_Login = $Fields2000_Login + @('AsymmetricKey', 'Certificate', 'Credential', 'ID', 'IsDisabled', 'IsLocked', 'IsPasswordExpired', 'MustChangePassword', 'PasswordExpirationEnabled', 'PasswordPolicyEnforced')
        $Fields201x_Login = $Fields200x_Login + @('PasswordHashAlgorithm')
    }
    process {
        foreach ($instance in $SqlInstance) {
            #region Safely convert input into instance parameters
            if ($instance.GetType() -eq [Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter]) {
                [DbaInstanceParameter]$ConvertedSqlInstance = $instance
                if ($ConvertedSqlInstance.Type -like "SqlConnection") {
                    [DbaInstanceParameter]$ConvertedSqlInstance = New-Object Microsoft.SqlServer.Management.Smo.Server($ConvertedSqlInstance.InputObject)
                }
            } else {
                [DbaInstanceParameter]$ConvertedSqlInstance = [DbaInstanceParameter]($instance | Select-Object -First 1)

                if ($instance.Count -gt 1) {
                    Write-Message -Level Warning -EnableException $true -Message "More than on server was specified when calling Connect-SqlInstance from $((Get-PSCallStack)[1].Command)"
                }
            }
            #endregion Safely convert input into instance parameters
            if ($instance.Type -like "Server") {
                if ($instance.InputObject.ConnectionContext.IsOpen -eq $false) {
                    $instance.InputObject.ConnectionContext.Connect()
                }
                if ($SqlConnectionOnly) {
                    return $instance.InputObject.ConnectionContext.SqlConnectionObject
                } else {
                    return $instance.InputObject
                }
            }
            if ($instance.Type -like "SqlConnection") {
                $server = New-Object Microsoft.SqlServer.Management.Smo.Server($instance.InputObject)

                if ($server.ConnectionContext.IsOpen -eq $false) {
                    $server.ConnectionContext.Connect()
                }
                if ($SqlConnectionOnly) {
                    return $server.ConnectionContext.SqlConnectionObject
                } else {
                    if (-not $server.ComputerName) {
                        if (-not $server.NetName -or $SqlInstance -match '\.') {
                            $parsedcomputername = $ConvertedSqlInstance.ComputerName
                        } else {
                            $parsedcomputername = $server.NetName
                        }
                        Add-Member -InputObject $server -NotePropertyName ComputerName -NotePropertyValue $parsedcomputername -Force
                    }
                    return $server
                }
            }

            if ($instance.IsConnectionString) {
                $server = New-Object Microsoft.SqlServer.Management.Smo.Server($instance.InputObject)
            } else {
                $server = New-Object Microsoft.SqlServer.Management.Smo.Server $instance.FullSmoName
            }

            if ($AppendConnectionString) {
                $connstring = $server.ConnectionContext.ConnectionString
                $server.ConnectionContext.ConnectionString = "$connstring;$appendconnectionstring"
                $server.ConnectionContext.Connect()
            } else {

                $server.ConnectionContext.ApplicationName = $ClientName

                if (Test-Bound -ParameterName 'AccessToken') {
                    $server.ConnectionContext.AccessToken = $AccessToken
                }
                if (Test-Bound -ParameterName 'BatchSeparator') {
                    $server.ConnectionContext.BatchSeparator = $BatchSeparator
                }
                if (Test-Bound -ParameterName 'ConnectTimeout') {
                    $server.ConnectionContext.ConnectTimeout = $ConnectTimeout
                }
                if (Test-Bound -ParameterName 'Database') {
                    $server.ConnectionContext.DatabaseName = $Database
                }
                if (Test-Bound -ParameterName 'EncryptConnection') {
                    $server.ConnectionContext.EncryptConnection = $true
                }
                if (Test-Bound -ParameterName 'LockTimeout') {
                    $server.ConnectionContext.LockTimeout = $LockTimeout
                }
                if (Test-Bound -ParameterName 'MaxPoolSize') {
                    $server.ConnectionContext.MaxPoolSize = $MaxPoolSize
                }
                if (Test-Bound -ParameterName 'MinPoolSize') {
                    $server.ConnectionContext.MinPoolSize = $MinPoolSize
                }
                if (Test-Bound -ParameterName 'MultipleActiveResultSets') {
                    $server.ConnectionContext.MultipleActiveResultSets = $true
                }
                if (Test-Bound -ParameterName 'NetworkProtocol') {
                    $server.ConnectionContext.NetworkProtocol = $NetworkProtocol
                }
                if (Test-Bound -ParameterName 'NonPooledConnection') {
                    $server.ConnectionContext.NonPooledConnection = $true
                }
                if (Test-Bound -ParameterName 'PacketSize') {
                    $server.ConnectionContext.PacketSize = $PacketSize
                }
                if (Test-Bound -ParameterName 'PooledConnectionLifetime') {
                    $server.ConnectionContext.PooledConnectionLifetime = $PooledConnectionLifetime
                }
                if (Test-Bound -ParameterName 'StatementTimeout') {
                    $server.ConnectionContext.StatementTimeout = $StatementTimeout
                }
                if (Test-Bound -ParameterName 'SqlExecutionModes') {
                    $server.ConnectionContext.SqlExecutionModes = $SqlExecutionModes
                }
                if (Test-Bound -ParameterName 'TrustServerCertificate') {
                    $server.ConnectionContext.TrustServerCertificate = $true
                }
                if (Test-Bound -ParameterName 'WorkstationId') {
                    $server.ConnectionContext.WorkstationId = $WorkstationId
                }

                $connstring = $server.ConnectionContext.ConnectionString
                if (Test-Bound -ParameterName 'MultiSubnetFailover') {
                    $connstring = "$connstring;MultiSubnetFailover=True"
                }
                if (Test-Bound -ParameterName 'FailoverPartner') {
                    $connstring = "$connstring;Failover Partner=$FailoverPartner"
                }
                if (Test-Bound -ParameterName 'ApplicationIntent') {
                    $connstring = "$connstring;ApplicationIntent=$ApplicationIntent"
                }

                if ($connstring -ne $server.ConnectionContext.ConnectionString) {
                    $server.ConnectionContext.ConnectionString = $connstring
                }

                try {
                    if ($null -ne $SqlCredential.UserName) {
                        $username = ($SqlCredential.UserName).TrimStart("\")

                        # support both ad\username and username@ad
                        if ($username -like "*\*" -or $username -like "*@*") {
                            if ($username -like "*\*") {
                                $domain, $login = $username.Split("\")
                                $authtype = "Windows Authentication with Credential"
                                if ($domain) {
                                    $formatteduser = "$login@$domain"
                                } else {
                                    $formatteduser = $username.Split("\")[1]
                                }
                            } else {
                                $formatteduser = $SqlCredential.UserName
                            }

                            $server.ConnectionContext.LoginSecure = $true
                            $server.ConnectionContext.ConnectAsUser = $true
                            $server.ConnectionContext.ConnectAsUserName = $formatteduser
                            $server.ConnectionContext.ConnectAsUserPassword = ($SqlCredential).GetNetworkCredential().Password
                        } else {
                            $authtype = "SQL Authentication"
                            $server.ConnectionContext.LoginSecure = $false
                            $server.ConnectionContext.set_Login($username)
                            $server.ConnectionContext.set_SecurePassword($SqlCredential.Password)
                        }
                    }

                    if ($NonPooled) {
                        $server.ConnectionContext.Connect()
                    } elseif ($authtype -eq "Windows Authentication with Credential") {
                        # Make it connect in a natural way, hard to explain.
                        $null = $server.Information.Version
                        if ($server.ConnectionContext.IsOpen -eq $false) {
                            $server.ConnectionContext.Connect()
                        }
                    } else {
                        $server.ConnectionContext.SqlConnectionObject.Open()
                    }
                } catch {
                    $originalException = $_.Exception
                    try {
                        $message = $originalException.InnerException.InnerException.ToString()
                    } catch {
                        $message = $originalException.ToString()
                    }
                    $message = ($message -Split '-->')[0]
                    $message = ($message -Split 'at System.Data.SqlClient')[0]
                    $message = ($message -Split 'at System.Data.ProviderBase')[0]

                    Stop-Function -Message "Can't connect to $instance" -ErrorRecord $_ -Continue
                }
            }

            if ($loadedSmoVersion -ge 11) {
                if ($server.VersionMajor -eq 8) {
                    # 2000
                    $initFieldsDb = New-Object System.Collections.Specialized.StringCollection
                    [void]$initFieldsDb.AddRange($Fields2000_Db)
                    $initFieldsLogin = New-Object System.Collections.Specialized.StringCollection
                    [void]$initFieldsLogin.AddRange($Fields2000_Login)
                    $server.SetDefaultInitFields([Microsoft.SqlServer.Management.Smo.Database], $initFieldsDb)
                    $server.SetDefaultInitFields([Microsoft.SqlServer.Management.Smo.Login], $initFieldsLogin)
                } elseif ($server.VersionMajor -eq 9 -or $server.VersionMajor -eq 10) {
                    # 2005 and 2008
                    $initFieldsDb = New-Object System.Collections.Specialized.StringCollection
                    [void]$initFieldsDb.AddRange($Fields200x_Db)
                    $initFieldsLogin = New-Object System.Collections.Specialized.StringCollection
                    [void]$initFieldsLogin.AddRange($Fields200x_Login)
                    $server.SetDefaultInitFields([Microsoft.SqlServer.Management.Smo.Database], $initFieldsDb)
                    $server.SetDefaultInitFields([Microsoft.SqlServer.Management.Smo.Login], $initFieldsLogin)
                } else {
                    # 2012 and above
                    $initFieldsDb = New-Object System.Collections.Specialized.StringCollection
                    [void]$initFieldsDb.AddRange($Fields201x_Db)
                    $initFieldsLogin = New-Object System.Collections.Specialized.StringCollection
                    [void]$initFieldsLogin.AddRange($Fields201x_Login)
                    $server.SetDefaultInitFields([Microsoft.SqlServer.Management.Smo.Database], $initFieldsDb)
                    $server.SetDefaultInitFields([Microsoft.SqlServer.Management.Smo.Login], $initFieldsLogin)
                }
            }

            if ($SqlConnectionOnly) {
                return $server.ConnectionContext.SqlConnectionObject
            } else {
                if (-not $server.ComputerName) {
                    if (-not $server.NetName -or $SqlInstance -match '\.') {
                        $parsedcomputername = $ConvertedSqlInstance.ComputerName
                    } else {
                        $parsedcomputername = $server.NetName
                    }
                    Add-Member -InputObject $server -NotePropertyName ComputerName -NotePropertyValue $parsedcomputername -Force
                }
            }
            $server
        }
    }
}

tools\dbatools\functions\ConvertTo-DbaDataTable.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function ConvertTo-DbaDataTable {
    <#
    .SYNOPSIS
        Creates a DataTable for an object.

    .DESCRIPTION
        Creates a DataTable based on an object's properties. This allows you to easily write to SQL Server tables.

        Thanks to Chad Miller, this is based on his script. https://gallery.technet.microsoft.com/scriptcenter/4208a159-a52e-4b99-83d4-8048468d29dd

        If the attempt to convert to data table fails, try the -Raw parameter for less accurate datatype detection.

    .PARAMETER InputObject
        The object to transform into a DataTable.

    .PARAMETER TimeSpanType
        Specifies the type to convert TimeSpan objects into. Default is 'TotalMilliseconds'. Valid options are: 'Ticks', 'TotalDays', 'TotalHours', 'TotalMinutes', 'TotalSeconds', 'TotalMilliseconds', and 'String'.

    .PARAMETER SizeType
        Specifies the type to convert DbaSize objects to. Default is 'Int64'. Valid options are 'Int32', 'Int64', and 'String'.

    .PARAMETER IgnoreNull
        If this switch is enabled, objects with null values will be ignored (empty rows will be added by default).

    .PARAMETER Raw
        If this switch is enabled, the DataTable will be created with strings. No attempt will be made to parse/determine data types.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: DataTable, Table, Data
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io/
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/ConvertTo-DbaDataTable

    .OUTPUTS
        System.Object[]

    .EXAMPLE
        PS C:\> Get-Service | ConvertTo-DbaDataTable

        Creates a DataTable from the output of Get-Service.

    .EXAMPLE
        PS C:\> ConvertTo-DbaDataTable -InputObject $csv.cheesetypes

        Creates a DataTable from the CSV object $csv.cheesetypes.

    .EXAMPLE
        PS C:\> $dblist | ConvertTo-DbaDataTable

        Creates a DataTable from the $dblist object passed in via pipeline.

    .EXAMPLE
        PS C:\> Get-Process | ConvertTo-DbaDataTable -TimeSpanType TotalSeconds

        Creates a DataTable with the running processes and converts any TimeSpan property to TotalSeconds.

    #>
    [CmdletBinding()]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseOutputTypeCorrectly", "", Justification = "PSSA Rule Ignored by BOH")]
    [OutputType([System.Object[]])]
    param (
        [Parameter(Position = 0,
            Mandatory,
            ValueFromPipeline)]
        [AllowNull()]
        [PSObject[]]$InputObject,
        [Parameter(Position = 1)]
        [ValidateSet("Ticks",
            "TotalDays",
            "TotalHours",
            "TotalMinutes",
            "TotalSeconds",
            "TotalMilliseconds",
            "String")]
        [ValidateNotNullOrEmpty()]
        [string]$TimeSpanType = "TotalMilliseconds",
        [ValidateSet("Int64", "Int32", "String")]
        [string]$SizeType = "Int64",
        [switch]$IgnoreNull,
        [switch]$Raw,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        Write-Message -Level Debug -Message "Bound parameters: $($PSBoundParameters.Keys -join ", ")"
        Write-Message -Level Debug -Message "TimeSpanType = $TimeSpanType | SizeType = $SizeType"
        Test-DbaDeprecation -DeprecatedOn 1.0.0 -Alias Out-DbaDataTable

        function Convert-Type {
            # This function will check so that the type is an accepted type which could be used when inserting into a table.
            # If a type is accepted (included in the $type array) then it will be passed on, otherwise it will first change type before passing it on.
            # Special types will have both their types converted as well as the value.
            # TimeSpan is a special type and will be converted into the $timespantype. (default: TotalMilliseconds) so that the timespan can be stored in a database further down the line.
            [CmdletBinding()]
            param (
                $type,
                $value,
                $timespantype = 'TotalMilliseconds',
                $sizetype = 'Int64'
            )

            $types = [System.Collections.ArrayList]@(
                'System.Int32',
                'System.UInt32',
                'System.Int16',
                'System.UInt16',
                'System.Int64',
                'System.UInt64',
                'System.Decimal',
                'System.Single',
                'System.Double',
                'System.Byte',
                'System.SByte',
                'System.Boolean',
                'System.DateTime',
                'System.Guid',
                'System.Char'
            )

            # The $special variable is used to mark the return value if a conversion was made on the value itself.
            # If this is set to true the original value will later be ignored when updating the DataTable.
            # And the value returned from this function will be used instead. (cannot modify existing properties)
            $special = $false
            $specialType = ""

            # Special types need to be converted in some way.
            # This attempt is to convert timespan into something that works in a table.
            # I couldn't decide on what to convert it to so the user can decide.
            # If the parameter is not used, TotalMilliseconds will be used as default.
            # Ticks are more accurate but I think milliseconds are more useful most of the time.
            if (($type -eq 'System.TimeSpan') -or ($type -eq 'Sqlcollaborative.Dbatools.Utility.DbaTimeSpan') -or ($type -eq 'Sqlcollaborative.Dbatools.Utility.DbaTimeSpanPretty')) {
                $special = $true
                if ($timespantype -eq 'String') {
                    $value = $value.ToString()
                    $type = 'System.String'
                } else {
                    # Let's use Int64 for all other types than string.
                    # We could match the type more closely with the timespantype but that can be added in the future if needed.
                    $value = $value.$timespantype
                    $type = 'System.Int64'
                }
                $specialType = 'Timespan'
            } elseif ($type -eq 'Sqlcollaborative.Dbatools.Utility.Size') {
                $special = $true
                switch ($sizetype) {
                    'Int64' {
                        $value = $value.Byte
                        $type = 'System.Int64'
                    }
                    'Int32' {
                        $value = $value.Byte
                        $type = 'System.Int32'
                    }
                    'String' {
                        $value = $value.ToString()
                        $type = 'System.String'
                    }
                }
                $specialType = 'Size'
            } elseif (-not ($type -in $types)) {
                # All types which are not found in the array will be converted into strings.
                # In this way we don't ignore it completely and it will be clear in the end why it looks as it does.
                $type = 'System.String'
            }

            # return a hashtable instead of an object. I like hashtables :)
            return @{ type = $type; Value = $value; Special = $special; SpecialType = $specialType }
        }

        function Convert-SpecialType {
            <#
            .SYNOPSIS
                Converts a value for a known column.

            .DESCRIPTION
                Converts a value for a known column.

            .PARAMETER Value
                The value to convert

            .PARAMETER Type
                The special type for which to convert

            .PARAMETER SizeType
                The size type defined by the user

            .PARAMETER TimeSpanType
                The timespan type defined by the user
        #>
            [CmdletBinding()]
            param (
                $Value,
                [ValidateSet('Timespan', 'Size')]
                [string]$Type,
                [string]$SizeType,
                [string]$TimeSpanType
            )

            switch ($Type) {
                'Size' {
                    if ($SizeType -eq 'String') { return $Value.ToString() }
                    else { return $Value.Byte }
                }
                'Timespan' {
                    if ($TimeSpanType -eq 'String') {
                        $Value.ToString()
                    } else {
                        $Value.$TimeSpanType
                    }
                }
            }
        }

        function Add-Column {
            <#
            .SYNOPSIS
                Adds a column to the datatable in progress.

            .DESCRIPTION
                Adds a column to the datatable in progress.

            .PARAMETER Property
                The property for which to add a column.

            .PARAMETER DataTable
                Autofilled. The table for which to add a column.

            .PARAMETER TimeSpanType
                Autofilled. How should timespans be handled?

            .PARAMETER SizeType
                Autofilled. How should sizes be handled?

            .PARAMETER Raw
                Autofilled. Whether the column should be string, no matter the input.
        #>
            [CmdletBinding()]
            param (
                [System.Management.Automation.PSPropertyInfo]$Property,
                [System.Data.DataTable]$DataTable = $datatable,
                [string]$TimeSpanType = $TimeSpanType,
                [string]$SizeType = $SizeType,
                [bool]$Raw = $Raw
            )

            $type = $property.TypeNameOfValue
            try {
                if ($Property.MemberType -like 'ScriptProperty') {
                    $type = $Property.GetType().FullName
                }
            } catch { $type = 'System.String' }

            $converted = Convert-Type -type $type -value $property.Value -timespantype $TimeSpanType -sizetype $SizeType

            $column = New-Object System.Data.DataColumn
            $column.ColumnName = $property.Name.ToString()
            if (-not $Raw) {
                $column.DataType = [System.Type]::GetType($converted.type)
            }
            $null = $DataTable.Columns.Add($column)
            $converted
        }

        $datatable = New-Object System.Data.DataTable

        # Accelerate subsequent lookups of columns and special type columns
        $columns = @()
        $specialColumns = @()
        $specialColumnsType = @{ }

        $ShouldCreateColumns = $true
    }

    process {
        #region Handle null objects
        if ($null -eq $InputObject) {
            if (-not $IgnoreNull) {
                $datarow = $datatable.NewRow()
                $datatable.Rows.Add($datarow)
            }

            # Only ends the current process block
            return
        }
        #endregion Handle null objects


        foreach ($object in $InputObject) {
            #region Handle null objects
            if ($null -eq $object) {
                if (-not $IgnoreNull) {
                    $datarow = $datatable.NewRow()
                    $datatable.Rows.Add($datarow)
                }
                continue
            }
            #endregion Handle null objects

            #Handle rows already being System.Data.DataRow
            if ($object.GetType().FullName -eq 'System.Data.DataRow') {
                if ($ShouldCreateColumns) {
                    $datatable = $object.Table.Copy()
                    $ShouldCreateColumns = $false
                }
                continue
            }

            # The new row to insert
            $datarow = $datatable.NewRow()

            #region Process Properties
            $objectProperties = $object.PSObject.Properties
            foreach ($property in $objectProperties) {
                #region Create Columns as needed
                if ($ShouldCreateColumns) {
                    $newColumn = Add-Column -Property $property
                    $columns += $property.Name
                    if ($newColumn.Special) {
                        $specialColumns += $property.Name
                        $specialColumnsType[$property.Name] = $newColumn.SpecialType
                    }
                }
                #endregion Create Columns as needed

                # Handle null properties, as well as properties with access errors
                try {
                    $propValueLength = $property.value.length
                } catch {
                    $propValueLength = 0
                }

                #region Insert value into column of row
                if ($propValueLength -gt 0) {
                    # If the typename was a special typename we want to use the value returned from Convert-Type instead.
                    # We might get error if we try to change the value for $property.value if it is read-only. That's why we use $converted.value instead.
                    if ($property.Name -in $specialColumns) {
                        $datarow.Item($property.Name) = Convert-SpecialType -Value $property.value -Type $specialColumnsType[$property.Name] -SizeType $SizeType -TimeSpanType $TimeSpanType
                    } else {
                        if ($property.value.ToString().length -eq 15) {
                            if ($property.value.ToString() -eq 'System.Object[]') {
                                $value = $property.value -join ", "
                            } elseif ($property.value.ToString() -eq 'System.String[]') {
                                $value = $property.value -join ", "
                            } else {
                                $value = $property.value
                            }
                        } else {
                            $value = $property.value
                        }

                        try {
                            $datarow.Item($property.Name) = $value
                        } catch {
                            if ($property.Name -notin $columns) {
                                try {
                                    $newColumn = Add-Column -Property $property
                                    $columns += $property.Name
                                    if ($newColumn.Special) {
                                        $specialColumns += $property.Name
                                        $specialColumnsType[$property.Name] = $newColumn.SpecialType
                                    }

                                    $datarow.Item($property.Name) = $newColumn.Value
                                } catch {
                                    Write-Message -Level Warning -Message "Failed to add property $($property.Name) from $object" -ErrorRecord $_ -Target $object
                                }
                            } else {
                                Write-Message -Level Warning -Message "Failed to add property $($property.Name) from $object" -ErrorRecord $_ -Target $object
                            }
                        }
                    }
                }
                #endregion Insert value into column of row
            }

            $datatable.Rows.Add($datarow)
            # If this is the first non-null object then the columns has just been created.
            # Set variable to false to skip creating columns from now on.
            if ($ShouldCreateColumns) {
                $ShouldCreateColumns = $false
            }
            #endregion Process Properties
        }
    }
    end {
        Write-Message -Level InternalComment -Message "Finished."
        , $datatable
    }
}

tools\dbatools\functions\ConvertTo-DbaTimeline.ps1

function ConvertTo-DbaTimeline {
    <#
    .SYNOPSIS
        Converts InputObject to a html timeline using Google Chart

    .DESCRIPTION
        This function accepts input as pipeline from the following dbatools functions:
        Get-DbaAgentJobHistory
        Get-DbaBackupHistory
        (more to come...)
        And generates Bootstrap based, HTML file with Google Chart Timeline

    .PARAMETER InputObject

        Pipe input, must an output from the above functions.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Chart
        Author: Marcin Gminski (@marcingminski)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        Dependency: ConvertTo-JsDate, Convert-DbaTimelineStatusColor

    .LINK
        https://dbatools.io/ConvertTo-DbaTimeline

    .EXAMPLE
        PS C:\> Get-DbaAgentJobHistory -SqlInstance sql-1 -StartDate '2018-08-13 00:00' -EndDate '2018-08-13 23:59' -ExcludeJobSteps | ConvertTo-DbaTimeline | Out-File C:\temp\DbaAgentJobHistory.html -Encoding ASCII

        Creates an output file containing a pretty timeline for all of the agent job history results for sql-1 the whole day of 2018-08-13

    .EXAMPLE
        PS C:\> Get-DbaCmsRegServer -SqlInstance sqlcm | Get-DbaBackupHistory -Since '2018-08-13 00:00' | ConvertTo-DbaTimeline | Out-File C:\temp\DbaBackupHistory.html -Encoding ASCII

        Creates an output file containing a pretty timeline for the agent job history since 2018-08-13 for all of the registered servers on sqlcm

    .EXAMPLE
        PS C:\> $messageParameters = @{
        >> Subject = "Backup history for sql2017 and sql2016"
        >> Body = Get-DbaBackupHistory -SqlInstance sql2017, sql2016 -Since '2018-08-13 00:00' | ConvertTo-DbaTimeline
        >> From = "[email protected]"
        >> To = "[email protected]"
        >> SmtpServer = "smtp.ad.local"
        >> }
        >>
        PS C:\> Send-MailMessage @messageParameters -BodyAsHtml

        Sends an email to [email protected] with the results of Get-DbaBackupHistory. Note that viewing these reports may not be supported in all email clients.

    #>
    [CmdletBinding()]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseOutputTypeCorrectly", "", Justification = "PSSA Rule Ignored by BOH")]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [object[]]$InputObject,
        [switch]$EnableException
    )
    begin {
        $body = $servers = @()
        $begin = @"
<html>
<head>
<!-- Developed by Marcin Gminski, https://marcin.gminski.net, 2018 -->
<!-- Load jQuery required to autosize timeline -->
<script src="https://code.jquery.com/jquery-3.3.1.min.js" integrity="sha256-FgpCb/KJQlLNfOu91ta32o/NMZxltwRo8QtmkMRdAu8=" crossorigin="anonymous"></script>
<!-- Load Bootstrap -->
<script src="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.7/js/bootstrap.min.js" integrity="sha384-Tc5IQib027qvyjSMfHjOMaLkfuWVxZxUPnCJA7l2mCWNIpG9mGCD8wGNIcPD7Txa" crossorigin="anonymous"></script>
<link rel="stylesheet" href="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.7/css/bootstrap.min.css" integrity="sha384-BVYiiSIFeK1dGmJRAkycuHAHRg32OmUcww7on3RYdg4Va+PmSTsz/K68vbdEjh4u" crossorigin="anonymous">
<link rel="stylesheet" href="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.7/css/bootstrap-theme.min.css" integrity="sha384-rHyoN1iRsVXV4nD0JutlnGaslCJuC7uwjduW9SVrLvRYooPp2bWYgmgJQIXwl/Sp" crossorigin="anonymous">
<!-- Load Google Charts library -->
<script type="text/javascript" src="https://www.gstatic.com/charts/loader.js"></script>
<!-- a bit of custom styling to work with bootstrap grid -->
<style>

    html,body{height:100%;background-color:#c2c2c2;}
    .viewport {height:100%}

    .chart{
        background-color:#fff;
        text-align:left;
        padding:0;
        border:1px solid #7D7D7D;
        -webkit-box-shadow:1px 1px 3px 0 rgba(0,0,0,.45);
        -moz-box-shadow:1px 1px 3px 0 rgba(0,0,0,.45);
        box-shadow:1px 1px 3px 0 rgba(0,0,0,.45)
    }
    .badge-custom{background-color:#939}
    .container {
        height:100%;
    }
    .fill{
        width:100%;
        height:100%;
        min-height:100%;
        padding:10px;
    }
    .timeline-tooltip{
        border:1px solid #E0E0E0;
        font-family:Arial,Helvetica;
        font-size:10pt;
        padding:12px
    }
    .timeline-tooltip div{padding:6px}
    .timeline-tooltip span{font-weight:700}
</style>
    <script type="text/javascript">
    google.charts.load('43', {'packages':['timeline']});
    google.charts.setOnLoadCallback(drawChart);
    function drawChart() {
        var container = document.getElementById('Chart');
        var chart = new google.visualization.Timeline(container);
        var dataTable = new google.visualization.DataTable();
        dataTable.addColumn({type: 'string', id: 'vLabel'});
        dataTable.addColumn({type: 'string', id: 'hLabel'});
        dataTable.addColumn({type: 'string', role: 'style' });
        dataTable.addColumn({type: 'date', id: 'date_start'});
        dataTable.addColumn({type: 'date', id: 'date_end'});

        dataTable.addRows([
"@
    }

    process {
        # create server list to support multiple servers
        if ($InputObject[0].SqlInstance -notin $servers) {
            $servers += $InputObject[0].SqlInstance
        }
        # This is where do column mapping.

        # Check for types - this will help support if someone assigns a variable then pipes
        # AgentJobHistory is a forced type while backuphistory is a legit type
        if ($InputObject[0].TypeName -eq 'AgentJobHistory') {
            $CallerName = "Get-DbaAgentJobHistory"
            $data = $InputObject | Select-Object @{ Name = "SqlInstance"; Expression = { $_.SqlInstance } }, @{ Name = "InstanceName"; Expression = { $_.InstanceName } }, @{ Name = "vLabel"; Expression = { $_.Job -replace "\'", ''} }, @{ Name = "hLabel"; Expression = { $_.Status } }, @{ Name = "Style"; Expression = { $(Convert-DbaTimelineStatusColor($_.Status)) } }, @{ Name = "StartDate"; Expression = { $(ConvertTo-JsDate($_.StartDate)) } }, @{ Name = "EndDate"; Expression = { $(ConvertTo-JsDate($_.EndDate)) } }

        } elseif ($InputObject[0] -is [Sqlcollaborative.Dbatools.Database.BackupHistory]) {
            $CallerName = "Get-DbaBackupHistory"
            $data = $InputObject | Select-Object @{ Name = "SqlInstance"; Expression = { $_.SqlInstance } }, @{ Name = "InstanceName"; Expression = { $_.InstanceName } }, @{ Name = "vLabel"; Expression = { $_.Database } }, @{ Name = "hLabel"; Expression = { $_.Type } }, @{ Name = "StartDate"; Expression = { $(ConvertTo-JsDate($_.Start)) } }, @{ Name = "EndDate"; Expression = { $(ConvertTo-JsDate($_.End)) } }
        } else {
            # sorry to be so formal, can't help it ;)
            Stop-Function -Message "Unsupported input data. To request support for additional commands, please file an issue at dbatools.io/issues and we'll take a look"
            return
        }
        $body += "$($data | ForEach-Object{ "['$($_.vLabel)','$($_.hLabel)','$($_.Style)',$($_.StartDate), $($_.EndDate)]," })"
    }
    end {
        if (Test-FunctionInterrupt) { return }
        $end = @"
]);
        var paddingHeight = 20;
        var rowHeight = dataTable.getNumberOfRows() * 41;
        var chartHeight = rowHeight + paddingHeight;
        dataTable.insertColumn(2, {type: 'string', role: 'tooltip', p: {html: true}});
        var dateFormat = new google.visualization.DateFormat({
          pattern: 'dd/MM/yy HH:mm:ss'
        });
        for (var i = 0; i < dataTable.getNumberOfRows(); i++) {
          var duration = (dataTable.getValue(i, 5).getTime() - dataTable.getValue(i, 4).getTime()) / 1000;
          var hours = parseInt( duration / 3600 ) % 24;
          var minutes = parseInt( duration / 60 ) % 60;
          var seconds = duration % 60;
          var tooltip = '<div class="timeline-tooltip"><span>' +
            dataTable.getValue(i, 1).split(",").join("<br />")  + '</span></div><div class="timeline-tooltip"><span>' +
            dataTable.getValue(i, 0) + '</span>: ' +
            dateFormat.formatValue(dataTable.getValue(i, 4)) + ' - ' +
            dateFormat.formatValue(dataTable.getValue(i, 5)) + '</div>' +
            '<div class="timeline-tooltip"><span>Duration: </span>' +
            hours + 'h ' + minutes + 'm ' + seconds + 's ';
          dataTable.setValue(i, 2, tooltip);
        }
        var options = {
            timeline: {
                rowLabelStyle: { },
                barLabelStyle: { },
            },
            hAxis: {
                format: 'dd/MM HH:mm',
            },
        }
        // Autosize chart. It would not be enough to just count rows and expand based on row height as there can be overlapping rows.
        // this will draw the chart, get the size of the underlying div and apply that size to the parent container and redraw:
        chart.draw(dataTable, options);
        // get the size of the chold div:
        var realheight= parseInt(`$("#Chart div:first-child div:first-child div:first-child div svg").attr( "height"))+70;
        // set the height:
        options.height=realheight
        // draw again:
        chart.draw(dataTable, options);
    }
</script>
</head>
<body>
    <div class="container-fluid">
    <div class="pull-left"><h3><code>$($CallerName)</code> timeline for server <code>$($servers -join ', ')</code></h3></div><div class="pull-right text-right"><img class="text-right" style="vertical-align:bottom; margin-top: 10px;" src="https://dbatools.io/wp-content/uploads/2016/05/dbatools-logo-1.png" width=150></div>
         <div class="clearfix"></div>
         <div class="col-12">
            <div class="chart" id="Chart"></div>
         </div>
         <hr>
    <p><a href="https://dbatools.io">dbatools.io</a> - the community's sql powershell module. Find us on Twitter: <a href="https://twitter.com/psdbatools">@psdbatools</a> | Chart by <a href="https://twitter.com/marcingminski">@marcingminski</a></p>
</div>
</body>
</html>
"@
        $begin, $body, $end
    }
}

tools\dbatools\functions\ConvertTo-DbaXESession.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function ConvertTo-DbaXESession {
    <#
    .SYNOPSIS
        Uses a slightly modified version of sp_SQLskills_ConvertTraceToExtendedEvents.sql to convert Traces to Extended Events.

    .DESCRIPTION
        Uses a slightly modified version of sp_SQLskills_ConvertTraceToExtendedEvents.sql to convert Traces to Extended Events.

        T-SQL code by: Jonathan M. Kehayias, SQLskills.com. T-SQL can be found in this module directory and at
        https://www.sqlskills.com/blogs/jonathan/converting-sql-trace-to-extended-events-in-sql-server-2012/

    .PARAMETER InputObject
        Specifies a Trace object output by Get-DbaTrace.

    .PARAMETER Name
        The name of the Trace to convert. If the name exists, characters will be appended to it.

    .PARAMETER OutputScriptOnly
        Outputs the T-SQL script to create the XE session and does not execute it.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Trace, ExtendedEvent
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Get-DbaTrace -SqlInstance sql2017, sql2012 | Where Id -eq 2 | ConvertTo-DbaXESession -Name 'Test'

        Converts Trace with ID 2 to a Session named Test on SQL Server instances named sql2017 and sql2012 and creates the Session on each respective server.

    .EXAMPLE
        PS C:\> Get-DbaTrace -SqlInstance sql2014 | Out-GridView -PassThru | ConvertTo-DbaXESession -Name 'Test' | Start-DbaXESession

        Converts selected traces on sql2014 to sessions, creates the session, and starts it.

    .EXAMPLE
        PS C:\> Get-DbaTrace -SqlInstance sql2014 | Where Id -eq 1 | ConvertTo-DbaXESession -Name 'Test' -OutputScriptOnly

        Converts trace ID 1 on sql2014 to an Extended Event and outputs the resulting T-SQL.

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [object[]]$InputObject,
        [parameter(Mandatory)]
        [string]$Name,
        [switch]$OutputScriptOnly,
        [switch]$EnableException
    )
    begin {
        $rawsql = Get-Content "$script:PSModuleRoot\bin\sp_SQLskills_ConvertTraceToEEs.sql" -Raw
    }
    process {
        foreach ($trace in $InputObject) {
            if (-not $trace.id -and -not $trace.Parent) {
                Stop-Function -Message "Input is of the wrong type. Use Get-DbaTrace." -Continue
                return
            }

            $server = $trace.Parent

            if ($server.VersionMajor -lt 11) {
                Stop-Function -Message "SQL Server version 2012+ required - $server not supported."
                return
            }

            $tempdb = $server.Databases['tempdb']
            $traceid = $trace.id

            if ((Get-DbaXESession -SqlInstance $server -Session $PSBoundParameters.Name)) {
                $oldname = $name
                $Name = "$name-$traceid"
                Write-Message -Level Output -Message "XE Session $oldname already exists on $server, trying $name."
            }

            if ((Get-DbaXESession -SqlInstance $server -Session $Name)) {
                $oldname = $name
                $Name = "$name-$(Get-Random)"
                Write-Message -Level Output -Message "XE Session $oldname already exists on $server, trying $name."
            }

            $sql = $rawsql.Replace("--TRACEID--", $traceid)
            $sql = $sql.Replace("--SESSIONNAME--", $name)

            try {
                Write-Message -Level Verbose -Message "Executing SQL in tempdb."
                $results = $tempdb.ExecuteWithResults($sql).Tables.Rows.SqlString
            } catch {
                Stop-Function -Message "Issue creating, dropping or executing sp_SQLskills_ConvertTraceToExtendedEvents in tempdb on $server." -Target $server -ErrorRecord $_
            }

            $results = $results -join "`r`n"

            if ($OutputScriptOnly) {
                $results
            } else {
                Write-Message -Level Verbose -Message "Creating XE Session $name."
                try {
                    $tempdb.ExecuteNonQuery($results)
                } catch {
                    Stop-Function -Message "Issue creating extended event $name on $server." -Target $server -ErrorRecord $_
                }
                Get-DbaXESession -SqlInstance $server -Session $name
            }
        }
    }
}

tools\dbatools\functions\Copy-DbaAgentAlert.ps1

function Copy-DbaAgentAlert {
    <#
    .SYNOPSIS
        Copy-DbaAgentAlert migrates alerts from one SQL Server to another.

    .DESCRIPTION
        By default, all alerts are copied. The -Alert parameter is auto-populated for command-line completion and can be used to copy only specific alerts.

        If the alert already exists on the destination, it will be skipped unless -Force is used.

    .PARAMETER Source
        Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.

    .PARAMETER SourceSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Destination
        Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.

    .PARAMETER DestinationSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Alert
        The alert(s) to process. This list is auto-populated from the server. If unspecified, all alerts will be processed.

    .PARAMETER ExcludeAlert
        The alert(s) to exclude. This list is auto-populated from the server.

    .PARAMETER IncludeDefaults
        Copy SQL Agent defaults such as FailSafeEmailAddress, ForwardingServer, and PagerSubjectTemplate.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER Force
        If this switch is enabled, the Alert will be dropped and recreated on Destination.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Migration, Agent
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        Requires: sysadmin access on SQL Servers

    .LINK
        https://dbatools.io/Copy-DbaAgentAlert

    .EXAMPLE
        PS C:\> Copy-DbaAgentAlert -Source sqlserver2014a -Destination sqlcluster

        Copies all alerts from sqlserver2014a to sqlcluster using Windows credentials. If alerts with the same name exist on sqlcluster, they will be skipped.

    .EXAMPLE
        PS C:\> Copy-DbaAgentAlert -Source sqlserver2014a -Destination sqlcluster -Alert PSAlert -SourceSqlCredential $cred -Force

        Copies a only the alert named PSAlert from sqlserver2014a to sqlcluster using SQL credentials for sqlserver2014a and Windows credentials for sqlcluster. If an alert with the same name exists on sqlcluster, it will be dropped and recreated because -Force was used.

    .EXAMPLE
        PS C:\> Copy-DbaAgentAlert -Source sqlserver2014a -Destination sqlcluster -WhatIf -Force

        Shows what would happen if the command were executed using force.

    #>
    [cmdletbinding(DefaultParameterSetName = "Default", SupportsShouldProcess)]
    param (
        [parameter(Mandatory)]
        [DbaInstanceParameter]$Source,
        [PSCredential]$SourceSqlCredential,
        [parameter(Mandatory)]
        [DbaInstanceParameter[]]$Destination,
        [PSCredential]$DestinationSqlCredential,
        [object[]]$Alert,
        [object[]]$ExcludeAlert,
        [switch]$IncludeDefaults,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {
        try {
            $sourceServer = Connect-SqlInstance -SqlInstance $Source -SqlCredential $SourceSqlCredential
            $serverAlerts = $sourceServer.JobServer.Alerts
        } catch {
            Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $Source
            return
        }
    }
    process {
        if (Test-FunctionInterrupt) { return }
        foreach ($destinstance in $Destination) {
            try {
                $destServer = Connect-SqlInstance -SqlInstance $destinstance -SqlCredential $DestinationSqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $destinstance -Continue
            }
            $destAlerts = $destServer.JobServer.Alerts

            if ($IncludeDefaults -eq $true) {
                if ($PSCmdlet.ShouldProcess($destinstance, "Creating Alert Defaults")) {
                    $copyAgentAlertStatus = [pscustomobject]@{
                        SourceServer      = $sourceServer.Name
                        DestinationServer = $destServer.Name
                        Name              = "Alert Defaults"
                        Type              = "Alert Defaults"
                        Status            = $null
                        Notes             = $null
                        DateTime          = [Sqlcollaborative.Dbatools.Utility.DbaDateTime](Get-Date)
                    }
                    try {
                        Write-Message -Message "Creating Alert Defaults" -Level Verbose
                        $sql = $sourceServer.JobServer.AlertSystem.Script() | Out-String
                        $sql = $sql -replace [Regex]::Escape("'$source'"), "'$destinstance'"

                        Write-Message -Message $sql -Level Debug
                        $null = $destServer.Query($sql)

                        $copyAgentAlertStatus.Status = "Successful"
                    } catch {
                        $copyAgentAlertStatus.Status = "Failed"
                        $copyAgentAlertStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                        Stop-Function -Message "Issue creating alert defaults." -Category InvalidOperation -ErrorRecord $_ -Target $destServer -Continue
                    }
                    $copyAgentAlertStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                }
            }

            foreach ($serverAlert in $serverAlerts) {
                $alertName = $serverAlert.name
                $copyAgentAlertStatus = [pscustomobject]@{
                    SourceServer      = $sourceServer.Name
                    DestinationServer = $destServer.Name
                    Name              = $alertName
                    Type              = "Agent Alert"
                    Notes             = $null
                    Status            = $null
                    DateTime          = [Sqlcollaborative.Dbatools.Utility.DbaDateTime](Get-Date)
                }
                if (($Alert -and $Alert -notcontains $alertName) -or ($ExcludeAlert -and $ExcludeAlert -contains $alertName)) {
                    continue
                }

                if ($destAlerts.name -contains $serverAlert.name) {
                    if ($force -eq $false) {
                        if ($PSCmdlet.ShouldProcess($destinstance, "Alert [$alertName] exists at destination. Use -Force to drop and migrate.")) {
                            $copyAgentAlertStatus.Status = "Skipped"
                            $copyAgentAlertStatus.Notes = "Already exists on destination"
                            $copyAgentAlertStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                            Write-Message -Message "Alert [$alertName] exists at destination. Use -Force to drop and migrate." -Level Verbose
                        }
                        continue
                    }

                    if ($PSCmdlet.ShouldProcess($destinstance, "Dropping alert $alertName and recreating")) {
                        try {
                            Write-Message -Message "Dropping Alert $alertName on $destServer." -Level Verbose

                            $sql = "EXEC msdb.dbo.sp_delete_alert @name = N'$($alertname)';"
                            Write-Message -Message $sql -Level Debug
                            $null = $destServer.Query($sql)
                            $destAlerts.Refresh()
                        } catch {
                            $copyAgentAlertStatus.Status = "Failed"
                            $copyAgentAlertStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                            Stop-Function -Message "Issue dropping/recreating alert" -Category InvalidOperation -ErrorRecord $_ -Target $destServer -Continue
                        }
                    }
                }

                if ($destAlerts | Where-Object { $_.Severity -eq $serverAlert.Severity -and $_.MessageID -eq $serverAlert.MessageID -and $_.DatabaseName -eq $serverAlert.DatabaseName -and $_.EventDescriptionKeyword -eq $serverAlert.EventDescriptionKeyword }) {
                    if ($PSCmdlet.ShouldProcess($destinstance, "Checking for conflicts")) {
                        $conflictMessage = "Alert [$alertName] has already been defined to use"
                        if ($serverAlert.Severity -gt 0) { $conflictMessage += " severity $($serverAlert.Severity)" }
                        if ($serverAlert.MessageID -gt 0) { $conflictMessage += " error number $($serverAlert.MessageID)" }
                        if ($serverAlert.DatabaseName) { $conflictMessage += " on database '$($serverAlert.DatabaseName)'" }
                        if ($serverAlert.EventDescriptionKeyword) { $conflictMessage += " with error text '$($serverAlert.Severity)'" }
                        $conflictMessage += ". Skipping."

                        Write-Message -Level Verbose -Message $conflictMessage
                        $copyAgentAlertStatus.Status = "Skipped"
                        $copyAgentAlertStatus.Notes = $conflictMessage
                        $copyAgentAlertStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                    }
                    continue
                }
                if ($serverAlert.JobName -and $destServer.JobServer.Jobs.Name -NotContains $serverAlert.JobName) {
                    Write-Message -Level Verbose -Message "Alert [$alertName] has job [$($serverAlert.JobName)] configured as response. The job does not exist on destination $destServer. Skipping."
                    if ($PSCmdlet.ShouldProcess($destinstance, "Checking for conflicts")) {
                        $copyAgentAlertStatus.Status = "Skipped"
                        $copyAgentAlertStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                    }
                    continue
                }

                if ($PSCmdlet.ShouldProcess($destinstance, "Creating Alert $alertName")) {
                    try {
                        Write-Message -Message "Copying Alert $alertName" -Level Verbose
                        $sql = $serverAlert.Script() | Out-String
                        $sql = $sql -replace "@job_id=N'........-....-....-....-............", "@job_id=N'00000000-0000-0000-0000-000000000000"

                        Write-Message -Message $sql -Level Debug
                        $null = $destServer.Query($sql)

                        $copyAgentAlertStatus.Status = "Successful"
                        $copyAgentAlertStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                    } catch {
                        $copyAgentAlertStatus.Status = "Failed"
                        $copyAgentAlertStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                        Stop-Function -Message "Issue creating alert" -Category InvalidOperation -ErrorRecord $_ -Target $destServer -Continue
                    }
                }

                $destServer.JobServer.Alerts.Refresh()
                $destServer.JobServer.Jobs.Refresh()

                $newAlert = $destServer.JobServer.Alerts[$alertName]
                $notifications = $serverAlert.EnumNotifications()
                $jobName = $serverAlert.JobName

                # JobId = 00000000-0000-0000-0000-000 means the Alert does not execute/is attached to a SQL Agent Job.
                if ($serverAlert.JobId -ne '00000000-0000-0000-0000-000000000000') {
                    $copyAgentAlertStatus = [pscustomobject]@{
                        SourceServer      = $sourceServer.Name
                        DestinationServer = $destServer.Name
                        Name              = $alertName
                        Type              = "Agent Alert Job Association"
                        Notes             = "Associated with $jobName"
                        Status            = $null
                        DateTime          = [Sqlcollaborative.Dbatools.Utility.DbaDateTime](Get-Date)
                    }
                    if ($PSCmdlet.ShouldProcess($destinstance, "Adding $alertName to $jobName")) {
                        try {
                            <# THERE needs to be validation within this block to see if the $jobName actually exists on the source server. #>
                            Write-Message -Message "Adding $alertName to $jobName" -Level Verbose
                            $newJob = $destServer.JobServer.Jobs[$jobName]
                            $newJobId = ($newJob.JobId) -replace " ", ""
                            $sql = $sql -replace '00000000-0000-0000-0000-000000000000', $newJobId
                            $sql = $sql -replace 'sp_add_alert', 'sp_update_alert'

                            Write-Message -Message $sql -Level Debug
                            $null = $destServer.Query($sql)

                            $copyAgentAlertStatus.Status = "Successful"
                            $copyAgentAlertStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                        } catch {
                            $copyAgentAlertStatus.Status = "Failed"
                            $copyAgentAlertStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                            Stop-Function -Message "Issue adding alert to job" -Category InvalidOperation -ErrorRecord $_ -Target $destServer
                        }
                    }
                }

                if ($PSCmdlet.ShouldProcess($destinstance, "Moving Notifications $alertName")) {
                    try {
                        $copyAgentAlertStatus = [pscustomobject]@{
                            SourceServer      = $sourceServer.Name
                            DestinationServer = $destServer.Name
                            Name              = $alertName
                            Type              = "Agent Alert Notification"
                            Notes             = $null
                            Status            = $null
                            DateTime          = [Sqlcollaborative.Dbatools.Utility.DbaDateTime](Get-Date)
                        }
                        # can't add them this way, we need to modify the existing one or give all options that are supported.
                        foreach ($notify in $notifications) {
                            $notifyCollection = @()
                            if ($notify.UseNetSend -eq $true) {
                                Write-Message -Message "Adding net send" -Level Verbose
                                $notifyCollection += "NetSend"
                            }

                            if ($notify.UseEmail -eq $true) {
                                Write-Message -Message "Adding email" -Level Verbose
                                $notifyCollection += "NotifyEmail"
                            }

                            if ($notify.UsePager -eq $true) {
                                Write-Message -Message "Adding pager" -Level Verbose
                                $notifyCollection += "Pager"
                            }

                            $notifyMethods = $notifyCollection -join ", "
                            $newAlert.AddNotification($notify.OperatorName, [Microsoft.SqlServer.Management.Smo.Agent.NotifyMethods]$notifyMethods)
                        }
                        $copyAgentAlertStatus.Status = "Successful"
                        $copyAgentAlertStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                    } catch {
                        $copyAgentAlertStatus.Status = "Failed"
                        $copyAgentAlertStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                        Stop-Function -Message "Issue moving notifications for the alert" -Category InvalidOperation -ErrorRecord $_ -Target $destServer
                    }
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Copy-SqlAlert
    }
}

tools\dbatools\functions\Copy-DbaAgentJob.ps1

function Copy-DbaAgentJob {
    <#
    .SYNOPSIS
        Copy-DbaAgentJob migrates jobs from one SQL Server to another.

    .DESCRIPTION
        By default, all jobs are copied. The -Job parameter is auto-populated for command-line completion and can be used to copy only specific jobs.

        If the job already exists on the destination, it will be skipped unless -Force is used.

    .PARAMETER Source
        Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.

    .PARAMETER SourceSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Destination
        Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.

    .PARAMETER DestinationSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Job
        The job(s) to process. This list is auto-populated from the server. If unspecified, all jobs will be processed.

    .PARAMETER ExcludeJob
        The job(s) to exclude. This list is auto-populated from the server.

    .PARAMETER DisableOnSource
        If this switch is enabled, the job will be disabled on the source server.

    .PARAMETER DisableOnDestination
        If this switch is enabled, the newly migrated job will be disabled on the destination server.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER Force
        If this switch is enabled, the Job will be dropped and recreated on Destination.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Migration, Agent, Job
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Copy-DbaAgentJob

    .EXAMPLE
        PS C:\> Copy-DbaAgentJob -Source sqlserver2014a -Destination sqlcluster

        Copies all jobs from sqlserver2014a to sqlcluster, using Windows credentials. If jobs with the same name exist on sqlcluster, they will be skipped.

    .EXAMPLE
        PS C:\> Copy-DbaAgentJob -Source sqlserver2014a -Destination sqlcluster -Job PSJob -SourceSqlCredential $cred -Force

        Copies a single job, the PSJob job from sqlserver2014a to sqlcluster, using SQL credentials for sqlserver2014a and Windows credentials for sqlcluster. If a job with the same name exists on sqlcluster, it will be dropped and recreated because -Force was used.

    .EXAMPLE
        PS C:\> Copy-DbaAgentJob -Source sqlserver2014a -Destination sqlcluster -WhatIf -Force

        Shows what would happen if the command were executed using force.
        
    .EXAMPLE
        PS C:\> Get-DbaAgentJob -SqlInstance sqlserver2014a | Where-Object Category -eq "Report Server" | ForEach-Object {Copy-DbaAgentJob -Source $_.SqlInstance -Job $_.Name -Destination sqlserver2014b}
        
        Copies all SSRS jobs (subscriptions) from AlwaysOn Primary SQL instance sqlserver2014a to AlwaysOn Secondary SQL instance sqlserver2014b
    #>
    [cmdletbinding(DefaultParameterSetName = "Default", SupportsShouldProcess)]
    param (
        [parameter(Mandatory)]
        [DbaInstanceParameter]$Source,
        [PSCredential]$SourceSqlCredential,
        [parameter(Mandatory)]
        [DbaInstanceParameter[]]$Destination,
        [PSCredential]$DestinationSqlCredential,
        [object[]]$Job,
        [object[]]$ExcludeJob,
        [switch]$DisableOnSource,
        [switch]$DisableOnDestination,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {
        try {
            $sourceServer = Connect-SqlInstance -SqlInstance $Source -SqlCredential $SourceSqlCredential
        } catch {
            Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $Source
            return
        }

        $serverJobs = $sourceServer.JobServer.Jobs
    }
    process {
        if (Test-FunctionInterrupt) { return }
        foreach ($destinstance in $Destination) {
            try {
                $destServer = Connect-SqlInstance -SqlInstance $destinstance -SqlCredential $DestinationSqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $destinstance -Continue
            }
            $destJobs = $destServer.JobServer.Jobs

            foreach ($serverJob in $serverJobs) {
                $jobName = $serverJob.name
                $jobId = $serverJob.JobId

                $copyJobStatus = [pscustomobject]@{
                    SourceServer      = $sourceServer.Name
                    DestinationServer = $destServer.Name
                    Name              = $jobName
                    Type              = "Agent Job"
                    Status            = $null
                    Notes             = $null
                    DateTime          = [DbaDateTime](Get-Date)
                }

                if ($Job -and $jobName -notin $Job -or $jobName -in $ExcludeJob) {
                    Write-Message -Level Verbose -Message "Job [$jobName] filtered. Skipping."
                    continue
                }
                Write-Message -Message "Working on job: $jobName" -Level Verbose
                $sql = "
                SELECT sp.[name] AS MaintenancePlanName
                FROM msdb.dbo.sysmaintplan_plans AS sp
                INNER JOIN msdb.dbo.sysmaintplan_subplans AS sps
                    ON sps.plan_id = sp.id
                WHERE job_id = '$($jobId)'"
                Write-Message -Message $sql -Level Debug

                $MaintenancePlanName = $sourceServer.Query($sql).MaintenancePlanName

                if ($MaintenancePlanName) {
                    if ($Pscmdlet.ShouldProcess($destinstance, "Job [$jobName] is associated with Maintenance Plan: $MaintenancePlanNam")) {
                        $copyJobStatus.Status = "Skipped"
                        $copyJobStatus.Notes = "Job is associated with maintenance plan"
                        $copyJobStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                        Write-Message -Level Verbose -Message "Job [$jobName] is associated with Maintenance Plan: $MaintenancePlanName"
                    }
                    continue
                }

                $dbNames = ($serverJob.JobSteps | where-object {$_.SubSystem -ne 'ActiveScripting'}).DatabaseName | Where-Object { $_.Length -gt 0 }
                $missingDb = $dbNames | Where-Object { $destServer.Databases.Name -notcontains $_ }

                if ($missingDb.Count -gt 0 -and $dbNames.Count -gt 0) {
                    if ($Pscmdlet.ShouldProcess($destinstance, "Database(s) $missingDb doesn't exist on destination. Skipping job [$jobName].")) {
                        $missingDb = ($missingDb | Sort-Object | Get-Unique) -join ", "
                        $copyJobStatus.Status = "Skipped"
                        $copyJobStatus.Notes = "Job is dependent on database: $missingDb"
                        $copyJobStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                        Write-Message -Level Verbose -Message "Database(s) $missingDb doesn't exist on destination. Skipping job [$jobName]."
                    }
                    continue
                }

                $missingLogin = $serverJob.OwnerLoginName | Where-Object { $destServer.Logins.Name -notcontains $_ }

                if ($missingLogin.Count -gt 0) {
                    if ($force -eq $false) {
                        if ($Pscmdlet.ShouldProcess($destinstance, "Login(s) $missingLogin doesn't exist on destination. Use -Force to set owner to [sa]. Skipping job [$jobName].")) {
                            $missingLogin = ($missingLogin | Sort-Object | Get-Unique) -join ", "
                            $copyJobStatus.Status = "Skipped"
                            $copyJobStatus.Notes = "Job is dependent on login $missingLogin"
                            $copyJobStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                            Write-Message -Level Verbose -Message "Login(s) $missingLogin doesn't exist on destination. Use -Force to set owner to [sa]. Skipping job [$jobName]."
                        }
                        continue
                    }
                }

                $proxyNames = ($serverJob.JobSteps | Where-Object ProxyName).ProxyName
                $missingProxy = $proxyNames | Where-Object { $destServer.JobServer.ProxyAccounts.Name -notcontains $_ }

                if ($missingProxy -and $proxyNames) {
                    if ($Pscmdlet.ShouldProcess($destinstance, "Proxy Account(s) $missingProxy doesn't exist on destination. Skipping job [$jobName].")) {
                        $missingProxy = ($missingProxy | Sort-Object | Get-Unique) -join ", "
                        $copyJobStatus.Status = "Skipped"
                        $copyJobStatus.Notes = "Job is dependent on proxy $missingProxy"
                        $copyJobStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                        Write-Message -Level Verbose -Message "Proxy Account(s) $missingProxy doesn't exist on destination. Skipping job [$jobName]."
                    }
                    continue
                }

                $operators = $serverJob.OperatorToEmail, $serverJob.OperatorToNetSend, $serverJob.OperatorToPage | Where-Object { $_.Length -gt 0 }
                $missingOperators = $operators | Where-Object { $destServer.JobServer.Operators.Name -notcontains $_ }

                if ($missingOperators.Count -gt 0 -and $operators.Count -gt 0) {
                    if ($Pscmdlet.ShouldProcess($destinstance, "Operator(s) $($missingOperator) doesn't exist on destination. Skipping job [$jobName]")) {
                        $missingOperator = ($operators | Sort-Object | Get-Unique) -join ", "
                        $copyJobStatus.Status = "Skipped"
                        $copyJobStatus.Notes = "Job is dependent on operator $missingOperator"
                        $copyJobStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                        Write-Message -Level Verbose -Message "Operator(s) $($missingOperator) doesn't exist on destination. Skipping job [$jobName]"
                    }
                    continue
                }

                if ($destJobs.name -contains $serverJob.name) {
                    if ($force -eq $false) {
                        if ($Pscmdlet.ShouldProcess($destinstance, "Job $jobName exists at destination. Use -Force to drop and migrate.")) {
                            $copyJobStatus.Status = "Skipped"
                            $copyJobStatus.Notes = "Already exists on destination"
                            $copyJobStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                            Write-Message -Level Verbose -Message "Job $jobName exists at destination. Use -Force to drop and migrate."
                        }
                        continue
                    } else {
                        if ($Pscmdlet.ShouldProcess($destinstance, "Dropping job $jobName and recreating")) {
                            try {
                                Write-Message -Message "Dropping Job $jobName" -Level Verbose
                                $destServer.JobServer.Jobs[$jobName].Drop()
                            } catch {
                                $copyJobStatus.Status = "Failed"
                                $copyJobStatus.Notes = (Get-ErrorMessage -Record $_).Message
                                $copyJobStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                                Stop-Function -Message "Issue dropping job" -Target $jobName -ErrorRecord $_ -Continue
                            }
                        }
                    }
                }

                if ($Pscmdlet.ShouldProcess($destinstance, "Creating Job $jobName")) {
                    try {
                        Write-Message -Message "Copying Job $jobName" -Level Verbose
                        $sql = $serverJob.Script() | Out-String

                        if ($missingLogin.Count -gt 0 -and $force) {
                            $saLogin = Get-SqlSaLogin -SqlInstance $destServer
                            $sql = $sql -replace [Regex]::Escape("@owner_login_name=N'$missingLogin'"), [Regex]::Escape("@owner_login_name=N'$saLogin'")
                        }

                        Write-Message -Message $sql -Level Debug
                        $destServer.Query($sql)

                        $destServer.JobServer.Jobs.Refresh()
                        $destServer.JobServer.Jobs[$serverJob.name].IsEnabled = $sourceServer.JobServer.Jobs[$serverJob.name].IsEnabled
                        $destServer.JobServer.Jobs[$serverJob.name].Alter()
                    } catch {
                        $copyJobStatus.Status = "Failed"
                        $copyJobStatus.Notes = (Get-ErrorMessage -Record $_)
                        $copyJobStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                        Stop-Function -Message "Issue copying job" -Target $jobName -ErrorRecord $_ -Continue
                    }
                }

                if ($DisableOnDestination) {
                    if ($Pscmdlet.ShouldProcess($destinstance, "Disabling $jobName")) {
                        Write-Message -Message "Disabling $jobName on $destinstance" -Level Verbose
                        $destServer.JobServer.Jobs[$serverJob.name].IsEnabled = $False
                        $destServer.JobServer.Jobs[$serverJob.name].Alter()
                    }
                }

                if ($DisableOnSource) {
                    if ($Pscmdlet.ShouldProcess($source, "Disabling $jobName")) {
                        Write-Message -Message "Disabling $jobName on $source" -Level Verbose
                        $serverJob.IsEnabled = $false
                        $serverJob.Alter()
                    }
                }
                if ($Pscmdlet.ShouldProcess($destinstance, "Reporting status of migration for $jobname")) {
                    $copyJobStatus.Status = "Successful"
                    $copyJobStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Copy-SqlJob
    }
}

tools\dbatools\functions\Copy-DbaAgentJobCategory.ps1

#ValidationTags#Messaging#
function Copy-DbaAgentJobCategory {
    <#
    .SYNOPSIS
        Copy-DbaAgentJobCategory migrates SQL Agent categories from one SQL Server to another. This is similar to sp_add_category.

        https://msdn.microsoft.com/en-us/library/ms181597.aspx

    .DESCRIPTION
        By default, all SQL Agent categories for Jobs, Operators and Alerts are copied.

        The -OperatorCategories parameter is auto-populated for command-line completion and can be used to copy only specific operator categories.
        The -AgentCategories parameter is auto-populated for command-line completion and can be used to copy only specific agent categories.
        The -JobCategories parameter is auto-populated for command-line completion and can be used to copy only specific job categories.

        If the category already exists on the destination, it will be skipped unless -Force is used.

    .PARAMETER Source
        Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.

    .PARAMETER SourceSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Destination
        Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.

    .PARAMETER DestinationSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER CategoryType
        Specifies the Category Type to migrate. Valid options are "Job", "Alert" and "Operator". When CategoryType is specified, all categories from the selected type will be migrated. For granular migrations, use the three parameters below.

    .PARAMETER OperatorCategory
        This parameter is auto-populated for command-line completion and can be used to copy only specific operator categories.

    .PARAMETER AgentCategory
        This parameter is auto-populated for command-line completion and can be used to copy only specific agent categories.

    .PARAMETER JobCategory
        This parameter is auto-populated for command-line completion and can be used to copy only specific job categories.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER Force
        If this switch is enabled, the Category will be dropped and recreated on Destination.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Migration, Agent
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        Requires: sysadmin access on SQL Servers

    .LINK
        https://dbatools.io/Copy-DbaAgentJobCategory

    .EXAMPLE
        PS C:\> Copy-DbaAgentJobCategory -Source sqlserver2014a -Destination sqlcluster

        Copies all operator categories from sqlserver2014a to sqlcluster using Windows authentication. If operator categories with the same name exist on sqlcluster, they will be skipped.

    .EXAMPLE
        PS C:\> Copy-DbaAgentJobCategory -Source sqlserver2014a -Destination sqlcluster -OperatorCategory PSOperator -SourceSqlCredential $cred -Force

        Copies a single operator category, the PSOperator operator category from sqlserver2014a to sqlcluster using SQL credentials to authenticate to sqlserver2014a and Windows credentials for sqlcluster. If an operator category with the same name exists on sqlcluster, it will be dropped and recreated because -Force was used.

    .EXAMPLE
        PS C:\> Copy-DbaAgentJobCategory -Source sqlserver2014a -Destination sqlcluster -WhatIf -Force

        Shows what would happen if the command were executed using force.

    #>
    [CmdletBinding(DefaultParameterSetName = "Default", SupportsShouldProcess)]
    param (
        [parameter(Mandatory)]
        [DbaInstanceParameter]$Source,
        [PSCredential]$SourceSqlCredential,
        [parameter(Mandatory)]
        [DbaInstanceParameter[]]$Destination,
        [PSCredential]$DestinationSqlCredential,
        [Parameter(ParameterSetName = 'SpecificAlerts')]
        [ValidateSet('Job', 'Alert', 'Operator')]
        [string[]]$CategoryType,
        [string[]]$JobCategory,
        [string[]]$AgentCategory,
        [string[]]$OperatorCategory,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias Copy-DbaAgentCategory
        function Copy-JobCategory {
            <#
                .SYNOPSIS
                    Copy-JobCategory migrates job categories from one SQL Server to another.

                .DESCRIPTION
                    By default, all job categories are copied. The -JobCategories parameter is auto-populated for command-line completion and can be used to copy only specific job categories.

                    If the associated credential for the category does not exist on the destination, it will be skipped. If the job category already exists on the destination, it will be skipped unless -Force is used.
            #>
            param (
                [string[]]$jobCategories
            )

            process {

                $serverJobCategories = $sourceServer.JobServer.JobCategories | Where-Object ID -ge 100
                $destJobCategories = $destServer.JobServer.JobCategories | Where-Object ID -ge 100

                foreach ($jobCategory in $serverJobCategories) {
                    $categoryName = $jobCategory.Name

                    $copyJobCategoryStatus = [pscustomobject]@{
                        SourceServer      = $sourceServer.Name
                        DestinationServer = $destServer.Name
                        Name              = $categoryName
                        Type              = "Agent Job Category"
                        Status            = $null
                        Notes             = $null
                        DateTime          = [Sqlcollaborative.Dbatools.Utility.DbaDateTime](Get-Date)
                    }

                    if ($jobCategories.Count -gt 0 -and $jobCategories -notcontains $categoryName) {
                        continue
                    }

                    if ($destJobCategories.Name -contains $jobCategory.name) {
                        if ($force -eq $false) {
                            $copyJobCategoryStatus.Status = "Skipped"
                            $copyJobCategoryStatus.Notes = "Already exists on destination"
                            $copyJobCategoryStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                            Write-Message -Level Verbose -Message "Job category $categoryName exists at destination. Use -Force to drop and migrate."
                            continue
                        } else {
                            if ($Pscmdlet.ShouldProcess($destinstance, "Dropping job category $categoryName")) {
                                try {
                                    Write-Message -Level Verbose -Message "Dropping Job category $categoryName"
                                    $destServer.JobServer.JobCategories[$categoryName].Drop()
                                } catch {
                                    $copyJobCategoryStatus.Status = "Failed"
                                    $copyJobCategoryStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                                    Stop-Function -Message "Issue dropping job category" -Target $categoryName -ErrorRecord $_ -Continue
                                }
                            }
                        }
                    }

                    if ($Pscmdlet.ShouldProcess($destinstance, "Creating Job category $categoryName")) {
                        try {
                            Write-Message -Level Verbose -Message "Copying Job category $categoryName"
                            $sql = $jobCategory.Script() | Out-String
                            Write-Message -Level Debug -Message "SQL Statement: $sql"
                            $destServer.Query($sql)

                            $copyJobCategoryStatus.Status = "Successful"
                            $copyJobCategoryStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                        } catch {
                            $copyJobCategoryStatus.Status = "Failed"
                            $copyJobCategoryStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                            Stop-Function -Message "Issue copying job category" -Target $categoryName -ErrorRecord $_
                        }
                    }
                }
            }
        }

        function Copy-OperatorCategory {
            <#
                .SYNOPSIS
                    Copy-OperatorCategory migrates operator categories from one SQL Server to another.

                .DESCRIPTION
                    By default, all operator categories are copied. The -OperatorCategories parameter is auto-populated for command-line completion and can be used to copy only specific operator categories.

                    If the associated credential for the category does not exist on the destination, it will be skipped. If the operator category already exists on the destination, it will be skipped unless -Force is used.
            #>
            [CmdletBinding(DefaultParameterSetName = "Default", SupportsShouldProcess)]
            param (
                [string[]]$operatorCategories
            )
            process {
                $serverOperatorCategories = $sourceServer.JobServer.OperatorCategories | Where-Object ID -ge 100
                $destOperatorCategories = $destServer.JobServer.OperatorCategories | Where-Object ID -ge 100

                foreach ($operatorCategory in $serverOperatorCategories) {
                    $categoryName = $operatorCategory.Name

                    $copyOperatorCategoryStatus = [pscustomobject]@{
                        SourceServer      = $sourceServer.Name
                        DestinationServer = $destServer.Name
                        Type              = "Agent Operator Category"
                        Name              = $categoryName
                        Status            = $null
                        Notes             = $null
                        DateTime          = [Sqlcollaborative.Dbatools.Utility.DbaDateTime](Get-Date)
                    }

                    if ($operatorCategories.Count -gt 0 -and $operatorCategories -notcontains $categoryName) {
                        continue
                    }

                    if ($destOperatorCategories.Name -contains $operatorCategory.Name) {
                        if ($force -eq $false) {
                            $copyOperatorCategoryStatus.Status = "Skipped"
                            $copyOperatorCategoryStatus.Notes = "Already exists on destination"
                            $copyOperatorCategoryStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                            Write-Message -Level Verbose -Message "Operator category $categoryName exists at destination. Use -Force to drop and migrate."
                            continue
                        } else {
                            if ($Pscmdlet.ShouldProcess($destinstance, "Dropping operator category $categoryName and recreating")) {
                                try {
                                    Write-Message -Level Verbose -Message "Dropping Operator category $categoryName"
                                    $destServer.JobServer.OperatorCategories[$categoryName].Drop()
                                    Write-Message -Level Verbose -Message "Copying Operator category $categoryName"
                                    $sql = $operatorCategory.Script() | Out-String
                                    Write-Message -Level Debug -Message $sql
                                    $destServer.Query($sql)
                                } catch {
                                    $copyOperatorCategoryStatus.Status = "Failed"
                                    $copyOperatorCategoryStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                                    Stop-Function -Message "Issue dropping operator category" -Target $categoryName -ErrorRecord $_
                                }
                            }
                        }
                    } else {
                        if ($Pscmdlet.ShouldProcess($destinstance, "Creating Operator category $categoryName")) {
                            try {
                                Write-Message -Level Verbose -Message "Copying Operator category $categoryName"
                                $sql = $operatorCategory.Script() | Out-String
                                Write-Message -Level Debug -Message $sql
                                $destServer.Query($sql)

                                $copyOperatorCategoryStatus.Status = "Successful"
                                $copyOperatorCategoryStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                            } catch {
                                $copyOperatorCategoryStatus.Status = "Failed"
                                $copyOperatorCategoryStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                                Stop-Function -Message "Issue copying operator category" -Target $categoryName -ErrorRecord $_
                            }
                        }
                    }
                }
            }
        }

        function Copy-AlertCategory {
            <#
                .SYNOPSIS
                    Copy-AlertCategory migrates alert categories from one SQL Server to another.

                .DESCRIPTION
                    By default, all alert categories are copied. The -AlertCategories parameter is auto-populated for command-line completion and can be used to copy only specific alert categories.

                    If the associated credential for the category does not exist on the destination, it will be skipped. If the alert category already exists on the destination, it will be skipped unless -Force is used.
            #>
            [CmdletBinding(DefaultParameterSetName = "Default", SupportsShouldProcess)]
            param (
                [string[]]$AlertCategories
            )

            process {
                if ($sourceServer.VersionMajor -lt 9 -or $destServer.VersionMajor -lt 9) {
                    throw "Server AlertCategories are only supported in SQL Server 2005 and above. Quitting."
                }

                $serverAlertCategories = $sourceServer.JobServer.AlertCategories | Where-Object ID -ge 100
                $destAlertCategories = $destServer.JobServer.AlertCategories | Where-Object ID -ge 100

                foreach ($alertCategory in $serverAlertCategories) {
                    $categoryName = $alertCategory.Name

                    $copyAlertCategoryStatus = [pscustomobject]@{
                        SourceServer      = $sourceServer.Name
                        DestinationServer = $destServer.Name
                        Type              = "Agent Alert Category"
                        Name              = $categoryName
                        Status            = $null
                        Notes             = $null
                        DateTime          = [Sqlcollaborative.Dbatools.Utility.DbaDateTime](Get-Date)
                    }

                    if ($alertCategories.Length -gt 0 -and $alertCategories -notcontains $categoryName) {
                        continue
                    }

                    if ($destAlertCategories.Name -contains $alertCategory.name) {
                        if ($force -eq $false) {
                            $copyAlertCategoryStatus.Status = "Skipped"
                            $copyAlertCategoryStatus.Notes = "Already exists on destination"
                            $copyAlertCategoryStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                            Write-Message -Level Verbose -Message "Alert category $categoryName exists at destination. Use -Force to drop and migrate."
                            continue
                        } else {
                            if ($Pscmdlet.ShouldProcess($destinstance, "Dropping alert category $categoryName and recreating")) {
                                try {
                                    Write-Message -Level Verbose -Message "Dropping Alert category $categoryName"
                                    $destServer.JobServer.AlertCategories[$categoryName].Drop()
                                    Write-Message -Level Verbose -Message "Copying Alert category $categoryName"
                                    $sql = $alertcategory.Script() | Out-String
                                    Write-Message -Level Debug -Message "SQL Statement: $sql"
                                    $destServer.Query($sql)
                                } catch {
                                    $copyAlertCategoryStatus.Status = "Failed"
                                    $copyAlertCategoryStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                                    Stop-Function -Message "Issue dropping alert category" -Target $categoryName -ErrorRecord $_
                                }
                            }
                        }
                    } else {
                        if ($Pscmdlet.ShouldProcess($destinstance, "Creating Alert category $categoryName")) {
                            try {
                                Write-Message -Level Verbose -Message "Copying Alert category $categoryName"
                                $sql = $alertCategory.Script() | Out-String
                                Write-Message -Level Debug -Message $sql
                                $destServer.Query($sql)

                                $copyAlertCategoryStatus.Status = "Successful"
                                $copyAlertCategoryStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                            } catch {
                                $copyAlertCategoryStatus.Status = "Failed"
                                $copyAlertCategoryStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                                Stop-Function -Message "Issue creating alert category" -Target $categoryName -ErrorRecord $_
                            }
                        }
                    }
                }
            }
        }

        try {
            $sourceServer = Connect-SqlInstance -SqlInstance $Source -SqlCredential $SourceSqlCredential
        } catch {
            Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $Source
            return
        }
    }
    process {
        if (Test-FunctionInterrupt) { return }
        foreach ($destinstance in $Destination) {
            try {
                $destServer = Connect-SqlInstance -SqlInstance $destinstance -SqlCredential $DestinationSqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $destinstance -Continue
            }

            if ($CategoryType.count -gt 0) {

                switch ($CategoryType) {
                    "Job" {
                        Copy-JobCategory
                    }

                    "Alert" {
                        Copy-AlertCategory
                    }

                    "Operator" {
                        Copy-OperatorCategory
                    }
                }
                continue
            }

            if (($OperatorCategory.Count + $AlertCategory.Count + $jobCategory.Count) -gt 0) {

                if ($OperatorCategory.Count -gt 0) {
                    Copy-OperatorCategory -OperatorCategories $OperatorCategory
                }

                if ($AlertCategory.Count -gt 0) {
                    Copy-AlertCategory -AlertCategories $AlertCategory
                }

                if ($jobCategory.Count -gt 0) {
                    Copy-JobCategory -JobCategories $jobCategory
                }
                continue
            }
            Copy-OperatorCategory
            Copy-AlertCategory
            Copy-JobCategory
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Copy-SqlAgentCategory
    }
}

tools\dbatools\functions\Copy-DbaAgentOperator.ps1

function Copy-DbaAgentOperator {
    <#
    .SYNOPSIS
        Copy-DbaAgentOperator migrates operators from one SQL Server to another.

    .DESCRIPTION
        By default, all operators are copied. The -Operators parameter is auto-populated for command-line completion and can be used to copy only specific operators.

        If the associated credentials for the operator do not exist on the destination, it will be skipped. If the operator already exists on the destination, it will be skipped unless -Force is used.

    .PARAMETER Source
        Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.

    .PARAMETER SourceSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Destination
        Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.

    .PARAMETER DestinationSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Operator
        The operator(s) to process. This list is auto-populated from the server. If unspecified, all operators will be processed.

    .PARAMETER ExcludeOperator
        The operators(s) to exclude. This list is auto-populated from the server.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER Force
        If this switch is enabled, the Operator will be dropped and recreated on Destination.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Migration, Agent, Operator
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        Requires: sysadmin access on SQL Servers

    .LINK
        https://dbatools.io/Copy-DbaAgentOperator

    .EXAMPLE
        PS C:\> Copy-DbaAgentOperator -Source sqlserver2014a -Destination sqlcluster

        Copies all operators from sqlserver2014a to sqlcluster using Windows credentials. If operators with the same name exist on sqlcluster, they will be skipped.

    .EXAMPLE
        PS C:\> Copy-DbaAgentOperator -Source sqlserver2014a -Destination sqlcluster -Operator PSOperator -SourceSqlCredential $cred -Force

        Copies only the PSOperator operator from sqlserver2014a to sqlcluster using SQL credentials for sqlserver2014a and Windows credentials for sqlcluster. If an operator with the same name exists on sqlcluster, it will be dropped and recreated because -Force was used.

    .EXAMPLE
        PS C:\> Copy-DbaAgentOperator -Source sqlserver2014a -Destination sqlcluster -WhatIf -Force

        Shows what would happen if the command were executed using force.

    #>
    [CmdletBinding(DefaultParameterSetName = "Default", SupportsShouldProcess)]
    param (
        [parameter(Mandatory)]
        [DbaInstanceParameter]$Source,
        [PSCredential]
        $SourceSqlCredential,
        [parameter(Mandatory)]
        [DbaInstanceParameter[]]$Destination,
        [PSCredential]
        $DestinationSqlCredential,
        [object[]]$Operator,
        [object[]]$ExcludeOperator,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        try {
            $sourceServer = Connect-SqlInstance -SqlInstance $Source -SqlCredential $SourceSqlCredential
        } catch {
            Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $Source
            return
        }
        $serverOperator = $sourceServer.JobServer.Operators
    }
    process {
        if (Test-FunctionInterrupt) { return }
        foreach ($destinstance in $Destination) {
            try {
                $destServer = Connect-SqlInstance -SqlInstance $destinstance -SqlCredential $DestinationSqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $destinstance -Continue
            }

            $destOperator = $destServer.JobServer.Operators
            $failsafe = $destServer.JobServer.AlertSystem | Select-Object FailSafeOperator
            foreach ($sOperator in $serverOperator) {
                $operatorName = $sOperator.Name

                $copyOperatorStatus = [pscustomobject]@{
                    SourceServer      = $sourceServer.Name
                    DestinationServer = $destServer.Name
                    Name              = $operatorName
                    Type              = "Agent Operator"
                    Status            = $null
                    Notes             = $null
                    DateTime          = [DbaDateTime](Get-Date)
                }

                if ($Operator -and $Operator -notcontains $operatorName -or $ExcludeOperator -in $operatorName) {
                    continue
                }

                if ($destOperator.Name -contains $sOperator.Name) {
                    if ($force -eq $false) {
                        if ($Pscmdlet.ShouldProcess($destinstance, "Operator $operatorName exists at destination. Use -Force to drop and migrate.")) {
                            $copyOperatorStatus.Status = "Skipped"
                            $copyOperatorStatus.Notes = "Already exists on destination"
                            $copyOperatorStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                            Write-Message -Level Verbose -Message "Operator $operatorName exists at destination. Use -Force to drop and migrate."
                        }
                        continue
                    } else {
                        if ($failsafe.FailSafeOperator -eq $operatorName) {
                            Write-Message -Level Verbose -Message "$operatorName is the failsafe operator. Skipping drop."
                            continue
                        }

                        if ($Pscmdlet.ShouldProcess($destinstance, "Dropping operator $operatorName and recreating")) {
                            try {
                                Write-Message -Level Verbose -Message "Dropping Operator $operatorName"
                                $destServer.JobServer.Operators[$operatorName].Drop()
                            } catch {
                                $copyOperatorStatus.Status = "Failed"
                                $copyOperatorStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                                Stop-Function -Message "Issue dropping operator" -Category InvalidOperation -ErrorRecord $_ -Target $destServer -Continue
                            }
                        }
                    }
                }

                if ($Pscmdlet.ShouldProcess($destinstance, "Creating Operator $operatorName")) {
                    try {
                        Write-Message -Level Verbose -Message "Copying Operator $operatorName"
                        $sql = $sOperator.Script() | Out-String
                        Write-Message -Level Debug -Message $sql
                        $destServer.Query($sql)

                        $copyOperatorStatus.Status = "Successful"
                        $copyOperatorStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                    } catch {
                        $copyOperatorStatus.Status = "Failed"
                        $copyOperatorStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                        Stop-Function -Message "Issue creating operator." -Category InvalidOperation -ErrorRecord $_ -Target $destServer
                    }
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Copy-SqlOperator
    }
}

tools\dbatools\functions\Copy-DbaAgentProxy.ps1

function Copy-DbaAgentProxy {
    <#
    .SYNOPSIS
        Copy-DbaAgentProxy migrates proxy accounts from one SQL Server to another.

    .DESCRIPTION
        By default, all proxy accounts are copied. The -ProxyAccounts parameter is auto-populated for command-line completion and can be used to copy only specific proxy accounts.

        If the associated credential for the account does not exist on the destination, it will be skipped. If the proxy account already exists on the destination, it will be skipped unless -Force is used.

    .PARAMETER Source
        Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.

    .PARAMETER SourceSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Destination
        Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.

    .PARAMETER DestinationSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER ProxyAccount
        Only migrate specific proxy accounts

    .PARAMETER ExcludeProxyAccount
        Migrate all proxy accounts except the ones explicitly excluded

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER Force
        If this switch is enabled, the Operator will be dropped and recreated on Destination.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Migration, Agent
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        Requires: sysadmin access on SQL Servers

    .LINK
        https://dbatools.io/Copy-DbaAgentProxy

    .EXAMPLE
        PS C:\> Copy-DbaAgentProxy -Source sqlserver2014a -Destination sqlcluster

        Copies all proxy accounts from sqlserver2014a to sqlcluster using Windows credentials. If proxy accounts with the same name exist on sqlcluster, they will be skipped.

    .EXAMPLE
        PS C:\> Copy-DbaAgentProxy -Source sqlserver2014a -Destination sqlcluster -ProxyAccount PSProxy -SourceSqlCredential $cred -Force

        Copies only the PSProxy proxy account from sqlserver2014a to sqlcluster using SQL credentials for sqlserver2014a and Windows credentials for sqlcluster. If a proxy account with the same name exists on sqlcluster, it will be dropped and recreated because -Force was used.

    .EXAMPLE
        PS C:\> Copy-DbaAgentProxy -Source sqlserver2014a -Destination sqlcluster -WhatIf -Force

        Shows what would happen if the command were executed using force.

    #>
    [CmdletBinding(DefaultParameterSetName = "Default", SupportsShouldProcess)]
    param (
        [parameter(Mandatory)]
        [DbaInstanceParameter]$Source,
        [PSCredential]$SourceSqlCredential,
        [parameter(Mandatory)]
        [DbaInstanceParameter[]]$Destination,
        [PSCredential]$DestinationSqlCredential,
        [string[]]$ProxyAccount,
        [string[]]$ExcludeProxyAccount,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias Copy-DbaAgentProxyAccount
        try {
            $sourceServer = Connect-SqlInstance -SqlInstance $Source -SqlCredential $SourceSqlCredential -MinimumVersion 9
        } catch {
            Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $Source
            return
        }
        $serverProxyAccounts = $sourceServer.JobServer.ProxyAccounts
        if ($ProxyAccount) {
            $serverProxyAccounts | Where-Object Name -in $ProxyAccount
        }
        if ($ExcludeProxyAccount) {
            $serverProxyAccounts | Where-Object Name -notin $ProxyAccount
        }
    }
    process {
        if (Test-FunctionInterrupt) { return }
        foreach ($destinstance in $Destination) {
            try {
                $destServer = Connect-SqlInstance -SqlInstance $destinstance -SqlCredential $DestinationSqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $destinstance -Continue
            }

            $destProxyAccounts = $destServer.JobServer.ProxyAccounts

            foreach ($account in $serverProxyAccounts) {
                $proxyName = $account.Name

                $copyAgentProxyAccountStatus = [pscustomobject]@{
                    SourceServer      = $sourceServer.Name
                    DestinationServer = $destServer.Name
                    Name              = $null
                    Type              = "Agent Proxy"
                    Status            = $null
                    Notes             = $null
                    DateTime          = [Sqlcollaborative.Dbatools.Utility.DbaDateTime](Get-Date)
                }

                $credentialName = $account.CredentialName
                $copyAgentProxyAccountStatus.Name = $proxyName
                $copyAgentProxyAccountStatus.Type = "Credential"

                # Proxy accounts rely on Credential accounts
                if (-not $CredentialName) {
                    $copyAgentProxyAccountStatus.Status = "Skipped"
                    $copyAgentProxyAccountStatus.Notes = "Skipping migration of $proxyName due to misconfigured (empty) credential name"
                    $copyAgentProxyAccountStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                    Write-Message -Level Verbose -Message "Skipping migration of $proxyName due to misconfigured (empty) credential name"
                    continue
                }

                try {
                    $credentialtest = $destServer.Credentials[$CredentialName]
                } catch {
                    #here to avoid an empty catch
                    $null = 1
                }

                if ($null -eq $credentialtest) {
                    $copyAgentProxyAccountStatus.Status = "Skipped"
                    $copyAgentProxyAccountStatus.Notes = "Associated credential account, $CredentialName, does not exist on $destinstance"
                    $copyAgentProxyAccountStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                    Write-Message -Level Verbose -Message "Associated credential account, $CredentialName, does not exist on $destinstance"
                    continue
                }

                if ($destProxyAccounts.Name -contains $proxyName) {
                    $copyAgentProxyAccountStatus.Name = $proxyName
                    $copyAgentProxyAccountStatus.Type = "ProxyAccount"

                    if ($force -eq $false) {
                        $copyAgentProxyAccountStatus.Status = "Skipped"
                        $copyAgentProxyAccountStatus.Notes = "Already exists on destination"
                        $copyAgentProxyAccountStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                        Stop-Function -Message "Server proxy account $proxyName exists at destination. Use -Force to drop and migrate." -Continue
                    } else {
                        if ($Pscmdlet.ShouldProcess($destinstance, "Dropping server proxy account $proxyName and recreating")) {
                            try {
                                Write-Message -Level Verbose -Message "Dropping server proxy account $proxyName"
                                $destServer.JobServer.ProxyAccounts[$proxyName].Drop()
                            } catch {
                                $copyAgentProxyAccountStatus.Status = "Failed"
                                $copyAgentProxyAccountStatus.Notes = "Could not drop"
                                $copyAgentProxyAccountStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                                Stop-Function -Message "Issue dropping proxy account" -Target $proxyName -ErrorRecord $_ -Continue
                            }
                        }
                    }
                }

                if ($Pscmdlet.ShouldProcess($destinstance, "Creating server proxy account $proxyName")) {
                    $copyAgentProxyAccountStatus.Name = $proxyName
                    $copyAgentProxyAccountStatus.Type = "ProxyAccount"

                    try {
                        Write-Message -Level Verbose -Message "Copying server proxy account $proxyName"
                        $sql = $account.Script() | Out-String
                        Write-Message -Level Debug -Message $sql
                        $destServer.Query($sql)

                        # Will fixing this misspelled status cause problems downstream?
                        $copyAgentProxyAccountStatus.Status = "Successful"
                        $copyAgentProxyAccountStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                    } catch {
                        $exceptionstring = $_.Exception.InnerException.ToString()
                        if ($exceptionstring -match 'subsystem') {
                            $copyAgentProxyAccountStatus.Status = "Skipping"
                            $copyAgentProxyAccountStatus.Notes = "Failure"
                            $copyAgentProxyAccountStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                            Write-Message -Level Verbose -Message "One or more subsystems do not exist on the destination server. Skipping that part."
                        } else {
                            $copyAgentProxyAccountStatus.Status = "Failed"
                            $copyAgentProxyAccountStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                            Stop-Function -Message "Issue creating proxy account" -Target $proxyName -ErrorRecord $_
                        }
                    }
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Copy-SqlProxyAccount
    }
}

tools\dbatools\functions\Copy-DbaAgentSchedule.ps1

function Copy-DbaAgentSchedule {
    <#
    .SYNOPSIS
        Copy-DbaAgentSchedule migrates shared job schedules from one SQL Server to another.

    .DESCRIPTION
        All shared job schedules are copied.

        If the associated credential for the account does not exist on the destination, it will be skipped. If the shared job schedule already exists on the destination, it will be skipped unless -Force is used.

    .PARAMETER Source
        Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.

    .PARAMETER SourceSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Destination
        Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.

    .PARAMETER DestinationSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER Force
        If this switch is enabled, the Operator will be dropped and recreated on Destination.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Migration, Agent
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        Requires: sysadmin access on SQL Servers

    .LINK
        https://dbatools.io/Copy-DbaAgentSchedule

    .EXAMPLE
        PS C:\> Copy-DbaAgentSchedule -Source sqlserver2014a -Destination sqlcluster

        Copies all shared job schedules from sqlserver2014a to sqlcluster using Windows credentials. If shared job schedules with the same name exist on sqlcluster, they will be skipped.

    .EXAMPLE
        PS C:\> Copy-DbaAgentSchedule -Source sqlserver2014a -Destination sqlcluster -WhatIf -Force

        Shows what would happen if the command were executed using force.

    #>
    [CmdletBinding(DefaultParameterSetName = "Default", SupportsShouldProcess)]
    param (
        [parameter(Mandatory)]
        [DbaInstanceParameter]$Source,
        [PSCredential]
        $SourceSqlCredential,
        [parameter(Mandatory)]
        [DbaInstanceParameter[]]$Destination,
        [PSCredential]
        $DestinationSqlCredential,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias Copy-DbaAgentSharedSchedule
        try {
            $sourceServer = Connect-SqlInstance -SqlInstance $Source -SqlCredential $SourceSqlCredential -MinimumVersion 9
        } catch {
            Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $Source
            return
        }
        $serverSchedules = $sourceServer.JobServer.SharedSchedules
    }
    process {
        if (Test-FunctionInterrupt) { return }
        foreach ($destinstance in $Destination) {
            try {
                $destServer = Connect-SqlInstance -SqlInstance $destinstance -SqlCredential $DestinationSqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $destinstance -Continue
            }

            $destSchedules = $destServer.JobServer.SharedSchedules
            foreach ($schedule in $serverSchedules) {
                $scheduleName = $schedule.Name
                $copySharedScheduleStatus = [pscustomobject]@{
                    SourceServer      = $sourceServer.Name
                    DestinationServer = $destServer.Name
                    Type              = "Agent Schedule"
                    Name              = $scheduleName
                    Status            = $null
                    Notes             = $null
                    DateTime          = [Sqlcollaborative.Dbatools.Utility.DbaDateTime](Get-Date)
                }

                if ($schedules.Length -gt 0 -and $schedules -notcontains $scheduleName) {
                    continue
                }

                if ($destSchedules.Name -contains $scheduleName) {
                    if ($force -eq $false) {
                        if ($Pscmdlet.ShouldProcess($destinstance, "Shared job schedule $scheduleName exists at destination. Use -Force to drop and migrate.")) {
                            $copySharedScheduleStatus.Status = "Skipped"
                            $copySharedScheduleStatus.Notes = "Already exists on destination"
                            $copySharedScheduleStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                            Write-Message -Level Verbose -Message "Shared job schedule $scheduleName exists at destination. Use -Force to drop and migrate."
                            continue
                        }
                    } else {
                        if ($Pscmdlet.ShouldProcess($destinstance, "Schedule [$scheduleName] has associated jobs. Skipping.")) {
                            if ($destServer.JobServer.Jobs.JobSchedules.Name -contains $scheduleName) {
                                $copySharedScheduleStatus.Status = "Skipped"
                                $copySharedScheduleStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                                Write-Message -Level Verbose -Message "Schedule [$scheduleName] has associated jobs. Skipping."
                            }
                            continue
                        } else {
                            if ($Pscmdlet.ShouldProcess($destinstance, "Dropping schedule $scheduleName and recreating")) {
                                try {
                                    Write-Message -Level Verbose -Message "Dropping schedule $scheduleName"
                                    $destServer.JobServer.SharedSchedules[$scheduleName].Drop()
                                } catch {
                                    $copySharedScheduleStatus.Status = "Failed"
                                    $copySharedScheduleStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                                    Stop-Function -Message "Issue dropping schedule" -Target $scheduleName -ErrorRecord $_ -Continue
                                }
                            }
                        }
                    }
                }

                if ($Pscmdlet.ShouldProcess($destinstance, "Creating schedule $scheduleName")) {
                    try {
                        Write-Message -Level Verbose -Message "Copying schedule $scheduleName"
                        $sql = $schedule.Script() | Out-String

                        Write-Message -Level Debug -Message $sql
                        $destServer.Query($sql)

                        $copySharedScheduleStatus.Status = "Successful"
                        $copySharedScheduleStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                    } catch {
                        $copySharedScheduleStatus.Status = "Failed"
                        $copySharedScheduleStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                        Stop-Function -Message "Issue creating schedule" -Target $scheduleName -ErrorRecord $_ -Continue
                    }
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Copy-SqlSharedSchedule
    }
}

tools\dbatools\functions\Copy-DbaAgentServer.ps1

function Copy-DbaAgentServer {
    <#
    .SYNOPSIS
        Copy SQL Server Agent from one server to another.

    .DESCRIPTION
        A wrapper function that calls the associated Copy command for each of the object types seen in SSMS under SQL Server Agent. This also copies all of the the SQL Agent properties (job history max rows, DBMail profile name, etc.).

        You must have sysadmin access and server version must be SQL Server version 2000 or greater.

    .PARAMETER Source
        Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.

    .PARAMETER SourceSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Destination
        Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.

    .PARAMETER DestinationSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER DisableJobsOnDestination
        If this switch is enabled, the jobs will be disabled on Destination after copying.

    .PARAMETER DisableJobsOnSource
        If this switch is enabled, the jobs will be disabled on Source after copying.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER Force
        If this switch is enabled, existing objects on Destination with matching names from Source will be dropped, then copied.

    .NOTES
        Tags: Migration, SqlServerAgent, SqlAgent
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        Requires: sysadmin access on SQL Servers

    .LINK
        https://dbatools.io/Copy-DbaAgentServer

    .EXAMPLE
        PS C:\> Copy-DbaAgentServer -Source sqlserver2014a -Destination sqlcluster

        Copies all job server objects from sqlserver2014a to sqlcluster using Windows credentials for authentication. If job objects with the same name exist on sqlcluster, they will be skipped.

    .EXAMPLE
        PS C:\> Copy-DbaAgentServer -Source sqlserver2014a -Destination sqlcluster -SourceSqlCredential $cred

        Copies all job objects from sqlserver2014a to sqlcluster using SQL credentials to authentication to sqlserver2014a and Windows credentials to authenticate to sqlcluster.

    .EXAMPLE
        PS C:\> Copy-DbaAgentServer -Source sqlserver2014a -Destination sqlcluster -WhatIf

        Shows what would happen if the command were executed.

    #>
    [cmdletbinding(SupportsShouldProcess)]
    param (
        [parameter(Mandatory)]
        [DbaInstanceParameter]$Source,
        [PSCredential]$SourceSqlCredential,
        [parameter(Mandatory)]
        [DbaInstanceParameter[]]$Destination,
        [PSCredential]$DestinationSqlCredential,
        [Switch]$DisableJobsOnDestination,
        [Switch]$DisableJobsOnSource,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        try {
            $sourceServer = Connect-SqlInstance -SqlInstance $Source -SqlCredential $SourceSqlCredential
        } catch {
            Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $Source
            return
        }
        Invoke-SmoCheck -SqlInstance $sourceServer
        $sourceAgent = $sourceServer.JobServer
    }
    process {
        if (Test-FunctionInterrupt) { return }
        foreach ($destinstance in $Destination) {
            try {
                $destServer = Connect-SqlInstance -SqlInstance $destinstance -SqlCredential $DestinationSqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $destinstance -Continue
            }
            Invoke-SmoCheck -SqlInstance $destServer
            # All of these support whatif inside of them
            Copy-DbaAgentJobCategory -Source $sourceServer -Destination $destServer -Force:$force

            $destServer.JobServer.JobCategories.Refresh()
            $destServer.JobServer.OperatorCategories.Refresh()
            $destServer.JobServer.AlertCategories.Refresh()

            Copy-DbaAgentOperator -Source $sourceServer -Destination $destServer -Force:$force
            $destServer.JobServer.Operators.Refresh()

            Copy-DbaAgentAlert -Source $sourceServer -Destination $destServer -Force:$force -IncludeDefaults
            $destServer.JobServer.Alerts.Refresh()

            Copy-DbaAgentProxy -Source $sourceServer -Destination $destServer -Force:$force
            $destServer.JobServer.ProxyAccounts.Refresh()

            Copy-DbaAgentSchedule -Source $sourceServer -Destination $destServer -Force:$force
            $destServer.JobServer.SharedSchedules.Refresh()

            $destServer.JobServer.Refresh()
            $destServer.Refresh()
            Copy-DbaAgentJob -Source $sourceServer -Destination $destServer -Force:$force -DisableOnDestination:$DisableJobsOnDestination -DisableOnSource:$DisableJobsOnSource

            # To do
            <#
            Copy-DbaAgentMasterServer -Source $sourceServer -Destination $destServer -Force:$force
            Copy-DbaAgentTargetServer -Source $sourceServer -Destination $destServer -Force:$force
            Copy-DbaAgentTargetServerGroup -Source $sourceServer -Destination $destServer -Force:$force
        #>

            <# Here are the properties which must be migrated separately #>
            $copyAgentPropStatus = [pscustomobject]@{
                SourceServer      = $sourceServer.Name
                DestinationServer = $destServer.Name
                Name              = "Server level properties"
                Type              = "Agent Properties"
                Status            = $null
                Notes             = $null
                DateTime          = [DbaDateTime](Get-Date)
            }

            if ($Pscmdlet.ShouldProcess($destinstance, "Copying Agent Properties")) {
                try {
                    Write-Message -Level Verbose -Message "Copying SQL Agent Properties"
                    $sql = $sourceAgent.Script() | Out-String
                    $sql = $sql -replace [Regex]::Escape("'$source'"), "'$destinstance'"
                    $sql = $sql -replace [Regex]::Escape("@errorlog_file="), [Regex]::Escape("--@errorlog_file=")
                    $sql = $sql -replace [Regex]::Escape("@auto_start="), [Regex]::Escape("--@auto_start=")
                    Write-Message -Level Debug -Message $sql
                    $null = $destServer.Query($sql)

                    $copyAgentPropStatus.Status = "Successful"
                    $copyAgentPropStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                } catch {
                    $message = $_.Exception.InnerException.InnerException.InnerException.Message
                    if (-not $message) { $message = $_.Exception.Message }
                    $copyAgentPropStatus.Status = "Failed"
                    $copyAgentPropStatus.Notes = $message
                    $copyAgentPropStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                    Stop-Function -Message $message -Target $destinstance
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Copy-SqlServerAgent
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Copy-DbaSqlServerAgent
    }
}

tools\dbatools\functions\Copy-DbaBackupDevice.ps1

function Copy-DbaBackupDevice {
    <#
    .SYNOPSIS
        Copies backup devices one by one. Copies both SQL code and the backup file itself.

    .DESCRIPTION
        Backups are migrated using Admin shares. If the destination directory does not exist, SQL Server's default backup directory will be used.

        If a backup device with same name exists on destination, it will not be dropped and recreated unless -Force is used.

    .PARAMETER Source
        Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.

    .PARAMETER SourceSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Destination
        Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.

    .PARAMETER DestinationSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER BackupDevice
        BackupDevice to be copied. Auto-populated list of devices. If not provided all BackupDevice(s) will be copied.

    .PARAMETER Force
        If this switch is enabled, backup device(s) will be dropped and recreated if they already exists on destination.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Migration, Backup
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        Requires: sysadmin access on SQL Servers

    .LINK
        https://dbatools.io/Copy-DbaBackupDevice

    .EXAMPLE
        PS C:\> Copy-DbaBackupDevice -Source sqlserver2014a -Destination sqlcluster

        Copies all server backup devices from sqlserver2014a to sqlcluster using Windows credentials. If backup devices with the same name exist on sqlcluster, they will be skipped.

    .EXAMPLE
        PS C:\> Copy-DbaBackupDevice -Source sqlserver2014a -Destination sqlcluster -BackupDevice backup01 -SourceSqlCredential $cred -Force

        Copies only the backup device named backup01 from sqlserver2014a to sqlcluster using SQL credentials for sqlserver2014a    and Windows credentials for sqlcluster. If a backup device with the same name exists on sqlcluster, it will be dropped and recreated because -Force was used.

    .EXAMPLE
        PS C:\> Copy-DbaBackupDevice -Source sqlserver2014a -Destination sqlcluster -WhatIf -Force

        Shows what would happen if the command were executed using force.

    #>
    [CmdletBinding(DefaultParameterSetName = "Default", SupportsShouldProcess)]
    param (
        [parameter(Mandatory)]
        [DbaInstanceParameter]$Source,
        [PSCredential]$SourceSqlCredential,
        [parameter(Mandatory)]
        [DbaInstanceParameter[]]$Destination,
        [PSCredential]$DestinationSqlCredential,
        [object[]]$BackupDevice,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {
        if (-not $script:isWindows) {
            Stop-Function -Message "Copy-DbaBackupDevice does not support Linux yet though it looks doable"
            return
        }
        try {
            $sourceServer = Connect-SqlInstance -SqlInstance $Source -SqlCredential $SourceSqlCredential
        } catch {
            Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $Source
            return
        }
        $serverBackupDevices = $sourceServer.BackupDevices
        $sourceNetBios = $Source.ComputerName
    }
    process {
        if (Test-FunctionInterrupt) { return }
        foreach ($destinstance in $Destination) {
            try {
                $destServer = Connect-SqlInstance -SqlInstance $destinstance -SqlCredential $DestinationSqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $destinstance -Continue
            }
            $destBackupDevices = $destServer.BackupDevices
            $destNetBios = $destinstance.ComputerName

            foreach ($currentBackupDevice in $serverBackupDevices) {
                $deviceName = $currentBackupDevice.Name

                $copyBackupDeviceStatus = [pscustomobject]@{
                    SourceServer      = $sourceServer.Name
                    DestinationServer = $destServer.Name
                    Name              = $deviceName
                    Type              = "Backup Device"
                    Status            = $null
                    Notes             = $null
                    DateTime          = [Sqlcollaborative.Dbatools.Utility.DbaDateTime](Get-Date)
                }

                if ($BackupDevice -and $BackupDevice -notcontains $deviceName) {
                    continue
                }

                if ($destBackupDevices.Name -contains $deviceName) {
                    if ($force -eq $false) {
                        $copyBackupDeviceStatus.Status = "Skipped"
                        $copyBackupDeviceStatus.Notes = "Already exists on destination"
                        $copyBackupDeviceStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                        Write-Message -Level Verbose -Message "backup device $deviceName exists at destination. Use -Force to drop and migrate."
                        continue
                    } else {
                        if ($Pscmdlet.ShouldProcess($destinstance, "Dropping backup device $deviceName")) {
                            try {
                                Write-Message -Level Verbose -Message "Dropping backup device $deviceName"
                                $destServer.BackupDevices[$deviceName].Drop()
                            } catch {
                                $copyBackupDeviceStatus.Status = "Failed"
                                $copyBackupDeviceStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                                Stop-Function -Message "Issue dropping backup device" -Target $deviceName -ErrorRecord $_ -Continue
                            }
                        }
                    }
                }

                if ($Pscmdlet.ShouldProcess($destinstance, "Generating SQL code for $deviceName")) {
                    Write-Message -Level Verbose -Message "Scripting out SQL for $deviceName"
                    try {
                        $sql = $currentBackupDevice.Script() | Out-String
                        $sql = $sql -replace [Regex]::Escape("'$source'"), "'$destinstance'"
                    } catch {
                        $copyBackupDeviceStatus.Status = "Failed"
                        $copyBackupDeviceStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                        Stop-Function -Message "Issue scripting out backup device" -Target $deviceName -ErrorRecord $_ -Continue
                    }
                }

                if ($Pscmdlet.ShouldProcess("console", "Stating that the actual file copy is about to occur")) {
                    Write-Message -Level Verbose -Message "Preparing to copy actual backup file"
                }

                $path = Split-Path $sourceServer.BackupDevices[$deviceName].PhysicalLocation
                $destPath = Join-AdminUnc $destNetBios $path
                $sourcepath = Join-AdminUnc $sourceNetBios $sourceServer.BackupDevices[$deviceName].PhysicalLocation

                Write-Message -Level Verbose -Message "Checking if directory $destPath exists"

                if ($(Test-DbaPath -SqlInstance $destServer -Path $path) -eq $false) {
                    $backupDirectory = $destServer.BackupDirectory
                    $destPath = Join-AdminUnc $destNetBios $backupDirectory

                    if ($Pscmdlet.ShouldProcess($destinstance, "Updating create code to use new path")) {
                        Write-Message -Level Verbose -Message "$path doesn't exist on $destinstance"
                        Write-Message -Level Verbose -Message "Using default backup directory $backupDirectory"

                        try {
                            Write-Message -Level Verbose -Message "Updating $deviceName to use $backupDirectory"
                            $sql = $sql -replace [Regex]::Escape($path), $backupDirectory
                        } catch {
                            $copyBackupDeviceStatus.Status = "Failed"
                            $copyBackupDeviceStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                            Stop-Function -Message "Issue updating script of backup device with new path" -Target $deviceName -ErrorRecord $_ -Continue
                        }
                    }
                }

                if ($Pscmdlet.ShouldProcess($destinstance, "Copying $sourcepath to $destPath using BITSTransfer")) {
                    try {
                        Start-BitsTransfer -Source $sourcepath -Destination $destPath -ErrorAction Stop
                        Write-Message -Level Verbose -Message "Backup device $deviceName successfully copied"
                    } catch {
                        $copyBackupDeviceStatus.Status = "Failed"
                        $copyBackupDeviceStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                        Stop-Function -Message "Issue copying backup device to destination" -Target $deviceName -ErrorRecord $_ -Continue
                    }
                }

                if ($Pscmdlet.ShouldProcess($destinstance, "Adding backup device $deviceName")) {
                    Write-Message -Level Verbose -Message "Adding backup device $deviceName on $destinstance"
                    try {
                        $destServer.Query($sql)
                        $destServer.BackupDevices.Refresh()

                        $copyBackupDeviceStatus.Status = "Successful"
                        $copyBackupDeviceStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                    } catch {
                        $copyBackupDeviceStatus.Status = "Failed"
                        $copyBackupDeviceStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                        Stop-Function -Message "Issue adding backup device" -Target $deviceName -ErrorRecord $_ -Continue
                    }
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Copy-SqlBackupDevice
    }
}

tools\dbatools\functions\Copy-DbaCmsRegServer.ps1

function Copy-DbaCmsRegServer {
    <#
    .SYNOPSIS
        Migrates SQL Server Central Management groups and server instances from one SQL Server to another.

    .DESCRIPTION
        Copy-DbaCmsRegServer copies all groups, subgroups, and server instances from one SQL Server to another.

    .PARAMETER Source
        Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.

    .PARAMETER SourceSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Destination
        Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.

    .PARAMETER DestinationSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Group
        This is an auto-populated array that contains your Central Management Server top-level groups on Source. You can specify one, many or none.

        If Group is not specified, all groups in your Central Management Server will be copied.

    .PARAMETER SwitchServerName
        If this switch is enabled, all instance names will be changed from Source to Destination.

        Central Management Server does not allow you to add a shared registered server with the same name as the Configuration Server.

    .PARAMETER Force
        If this switch is enabled, group(s) will be dropped and recreated if they already exists on destination.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Migration
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        Requires: sysadmin access on SQL Servers

    .LINK
        https://dbatools.io/Copy-DbaCmsRegServer

    .EXAMPLE
        PS C:\> Copy-DbaCmsRegServer -Source sqlserver2014a -Destination sqlcluster

        All groups, subgroups, and server instances are copied from sqlserver2014a CMS to sqlcluster CMS.

    .EXAMPLE
        PS C:\> Copy-DbaCmsRegServer -Source sqlserver2014a -Destination sqlcluster -Group Group1,Group3

        Top-level groups Group1 and Group3 along with their subgroups and server instances are copied from sqlserver to sqlcluster.

    .EXAMPLE
        PS C:\> Copy-DbaCmsRegServer -Source sqlserver2014a -Destination sqlcluster -Group Group1,Group3 -SwitchServerName -SourceSqlCredential $SourceSqlCredential -DestinationSqlCredential $DestinationSqlCredential

        Top-level groups Group1 and Group3 along with their subgroups and server instances are copied from sqlserver to sqlcluster. When adding sql instances to sqlcluster, if the server name of the migrating instance is "sqlcluster", it will be switched to "sqlserver".

        If SwitchServerName is not specified, "sqlcluster" will be skipped.

    #>
    [CmdletBinding(DefaultParameterSetName = "Default", SupportsShouldProcess)]
    param (
        [parameter(Mandatory)]
        [DbaInstanceParameter]$Source,
        [PSCredential]$SourceSqlCredential,
        [parameter(Mandatory)]
        [DbaInstanceParameter[]]$Destination,
        [PSCredential]$DestinationSqlCredential,
        [Alias('CMSGroup')]
        [string[]]$Group,
        [switch]$SwitchServerName,
        [switch]$Force,
        [switch]$EnableException
    )
    begin {
        if (-not $script:isWindows) {
            Stop-Function -Message "Copy-DbaCmsRegServer does not support Linux - we're still waiting for the Core SMOs from Microsoft"
            return
        }
        
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias Copy-DbaCentralManagementServer
        function Invoke-ParseServerGroup {
            [cmdletbinding()]
            param (
                $sourceGroup,
                $destinationGroup,
                $SwitchServerName
            )
            if ($destinationGroup.Name -eq "DatabaseEngineServerGroup" -and $sourceGroup.Name -ne "DatabaseEngineServerGroup") {
                $currentServerGroup = $destinationGroup
                $groupName = $sourceGroup.Name
                $destinationGroup = $destinationGroup.ServerGroups[$groupName]

                $copyDestinationGroupStatus = [pscustomobject]@{
                    SourceServer      = $sourceServer.Name
                    DestinationServer = $destServer.Name
                    Name              = $groupName
                    Type              = "CMS Destination Group"
                    Status            = $null
                    Notes             = $null
                    DateTime          = [Sqlcollaborative.Dbatools.Utility.DbaDateTime](Get-Date)
                }

                if ($null -ne $destinationGroup) {

                    if ($force -eq $false) {
                        if ($Pscmdlet.ShouldProcess($destinstance, "Checking to see if $groupName exists")) {
                            $copyDestinationGroupStatus.Status = "Skipped"
                            $copyDestinationGroupStatus.Notes = "Already exists on destination"
                            $copyDestinationGroupStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                            Write-Message -Level Verbose -Message "Destination group $groupName exists at destination. Use -Force to drop and migrate."
                        }
                        continue
                    }
                    if ($Pscmdlet.ShouldProcess($destinstance, "Dropping group $groupName")) {
                        try {
                            Write-Message -Level Verbose -Message "Dropping group $groupName"
                            $destinationGroup.Drop()
                        } catch {
                            $copyDestinationGroupStatus.Status = "Failed"
                            $copyDestinationGroupStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                            Stop-Function -Message "Issue dropping group" -Target $groupName -ErrorRecord $_ -Continue
                        }
                    }
                }

                if ($Pscmdlet.ShouldProcess($destinstance, "Creating group $groupName")) {
                    Write-Message -Level Verbose -Message "Creating group $($sourceGroup.Name)"
                    $destinationGroup = New-Object Microsoft.SqlServer.Management.RegisteredServers.ServerGroup($currentServerGroup, $sourceGroup.Name)
                    $destinationGroup.Create()

                    $copyDestinationGroupStatus.Status = "Successful"
                    $copyDestinationGroupStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                }
            }

            # Add Servers
            foreach ($instance in $sourceGroup.RegisteredServers) {
                $instanceName = $instance.Name
                $serverName = $instance.ServerName

                $copyInstanceStatus = [pscustomobject]@{
                    SourceServer      = $sourceServer.Name
                    DestinationServer = $destServer.Name
                    Name              = $instanceName
                    Type              = "CMS Instance"
                    Status            = $null
                    Notes             = $null
                    DateTime          = [Sqlcollaborative.Dbatools.Utility.DbaDateTime](Get-Date)
                }

                if ($serverName.ToLower() -eq $toCmStore.DomainInstanceName.ToLower()) {
                    if ($Pscmdlet.ShouldProcess($destinstance, "Checking to see if server is the CMS equals current server name")) {
                        if ($SwitchServerName) {
                            $serverName = $fromCmStore.DomainInstanceName
                            $instanceName = $fromCmStore.DomainInstanceName
                            Write-Message -Level Verbose -Message "SwitchServerName was used and new CMS equals current server name. $($toCmStore.DomainInstanceName.ToLower()) changed to $serverName."
                        } else {
                            $copyInstanceStatus.Status = "Skipped"
                            $copyInstanceStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                            Write-Message -Level Verbose -Message "$serverName is Central Management Server. Add prohibited. Skipping."
                            continue
                        }
                    }
                }

                if ($destinationGroup.RegisteredServers.Name -contains $instanceName) {

                    if ($force -eq $false) {
                        if ($Pscmdlet.ShouldProcess($destinstance, "Checking to see if $instanceName in $groupName exists")) {
                            $copyInstanceStatus.Status = "Skipped"
                            $copyInstanceStatus.Notes = "Already exists on destination"
                            $copyInstanceStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                            Write-Message -Level Verbose -Message "Instance $instanceName exists in group $groupName at destination. Use -Force to drop and migrate."
                        }
                        continue
                    }

                    if ($Pscmdlet.ShouldProcess($destinstance, "Dropping instance $instanceName from $groupName and recreating")) {
                        try {
                            Write-Message -Level Verbose -Message "Dropping instance $instance from $groupName"
                            $destinationGroup.RegisteredServers[$instanceName].Drop()
                        } catch {
                            $copyInstanceStatus.Status = "Failed"
                            $copyInstanceStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                            Stop-Function -Message "Issue dropping instance from group" -Target $instanceName -ErrorRecord $_ -Continue
                        }
                    }
                }

                if ($Pscmdlet.ShouldProcess($destinstance, "Copying $instanceName")) {
                    $newServer = New-Object Microsoft.SqlServer.Management.RegisteredServers.RegisteredServer($destinationGroup, $instanceName)
                    $newServer.ServerName = $serverName
                    $newServer.Description = $instance.Description

                    if ($serverName -ne $fromCmStore.DomainInstanceName) {
                        $newServer.SecureConnectionString = $instance.SecureConnectionString.ToString()
                        $newServer.ConnectionString = $instance.ConnectionString.ToString()
                    }

                    try {
                        $newServer.Create()

                        $copyInstanceStatus.Status = "Successful"
                        $copyInstanceStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                    } catch {
                        $copyInstanceStatus.Status = "Failed"
                        $copyInstanceStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                        if ($_.Exception -match "same name") {
                            Stop-Function -Message "Could not add Switched Server instance name." -Target $instanceName -ErrorRecord $_ -Continue
                        } else {
                            Stop-Function -Message "Failed to add $serverName" -Target $instanceName -ErrorRecord $_ -Continue
                        }
                    }
                    Write-Message -Level Verbose -Message "Added Server $serverName as $instanceName to $($destinationGroup.Name)"
                }
            }

            # Add Groups
            foreach ($fromSubGroup in $sourceGroup.ServerGroups) {
                $fromSubGroupName = $fromSubGroup.Name
                $toSubGroup = $destinationGroup.ServerGroups[$fromSubGroupName]

                $copyGroupStatus = [pscustomobject]@{
                    SourceServer      = $sourceServer.Name
                    DestinationServer = $destServer.Name
                    Name              = $fromSubGroupName
                    Type              = "CMS Group"
                    Status            = $null
                    Notes             = $null
                    DateTime          = [Sqlcollaborative.Dbatools.Utility.DbaDateTime](Get-Date)
                }

                if ($null -ne $toSubGroup) {
                    if ($force -eq $false) {
                        if ($Pscmdlet.ShouldProcess($destinstance, "Checking to see if subgroup $fromSubGroupName exists")) {
                            $copyGroupStatus.Status = "Skipped"
                            $copyGroupStatus.Notes = "Already exists on destination"
                            $copyGroupStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                            Write-Message -Level Verbose -Message "Subgroup $fromSubGroupName exists at destination. Use -Force to drop and migrate."
                        }
                        continue
                    }

                    if ($Pscmdlet.ShouldProcess($destinstance, "Dropping subgroup $fromSubGroupName recreating")) {
                        try {
                            Write-Message -Level Verbose -Message "Dropping subgroup $fromSubGroupName"
                            $toSubGroup.Drop()
                        } catch {
                            $copyGroupStatus.Status = "Failed"
                            $copyGroupStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                            Stop-Function -Message "Issue dropping subgroup" -Target $toSubGroup -ErrorRecord $_ -Continue
                        }
                    }
                }

                if ($Pscmdlet.ShouldProcess($destinstance, "Creating group $($fromSubGroup.Name)")) {
                    Write-Message -Level Verbose -Message "Creating group $($fromSubGroup.Name)"
                    $toSubGroup = New-Object Microsoft.SqlServer.Management.RegisteredServers.ServerGroup($destinationGroup, $fromSubGroup.Name)
                    $toSubGroup.create()

                    $copyGroupStatus.Status = "Successful"
                    $copyGroupStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                }

                Invoke-ParseServerGroup -sourceGroup $fromSubGroup -destinationgroup $toSubGroup -SwitchServerName $SwitchServerName
            }
        }

        try {
            $sourceServer = Connect-SqlInstance -SqlInstance $Source -SqlCredential $SourceSqlCredential -MinimumVersion 10
            $fromCmStore = Get-DbaCmsRegServerStore -SqlInstance $sourceServer
        } catch {
            Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $Source
            return
        }
    }

    process {
        if (Test-FunctionInterrupt) { return }
        foreach ($destinstance in $Destination) {
            try {
                $destServer = Connect-SqlInstance -SqlInstance $destinstance -SqlCredential $DestinationSqlCredential -MinimumVersion 10
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $destinstance -Continue
            }
            $toCmStore = Get-DbaCmsRegServerStore -SqlInstance $destServer

            $stores = $fromCmStore.DatabaseEngineServerGroup
            if ($Group) {
                $stores = @();
                foreach ($groupName in $Group) {
                    $stores += $fromCmStore.DatabaseEngineServerGroup.ServerGroups[$groupName]
                }
            }

            foreach ($store in $stores) {
                Invoke-ParseServerGroup -sourceGroup $store -destinationgroup $toCmStore.DatabaseEngineServerGroup -SwitchServerName $SwitchServerName
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Copy-SqlCentralManagementServer
    }
}

tools\dbatools\functions\Copy-DbaCredential.ps1

function Copy-DbaCredential {
    <#
    .SYNOPSIS
        Copy-DbaCredential migrates SQL Server Credentials from one SQL Server to another while maintaining Credential passwords.

    .DESCRIPTION
        By using password decryption techniques provided by Antti Rantasaari (NetSPI, 2014), this script migrates SQL Server Credentials from one server to another while maintaining username and password.

        Credit: https://blog.netspi.com/decrypting-mssql-database-link-server-passwords/

    .PARAMETER Source
        Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.

    .PARAMETER SourceSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Destination
        Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.

    .PARAMETER DestinationSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Credential
        This command requires access to the Windows OS via PowerShell remoting. Use this credential to connect to Windows using alternative credentials.

    .PARAMETER Name
        Only include specific names
        Note: if spaces exist in the credential name, you will have to type "" or '' around it.

    .PARAMETER ExcludeName
        Excluded credential names

    .PARAMETER Identity
        Only include specific identities
        Note: if spaces exist in the credential identity, you will have to type "" or '' around it.

    .PARAMETER ExcludeIdentity
        Excluded identities

    .PARAMETER Force
        If this switch is enabled, the Credential will be dropped and recreated if it already exists on Destination.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: WSMan, Migration
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        Requires:
        - PowerShell Version 3.0
        - Administrator access on Windows
        - sysadmin access on SQL Server.
        - DAC access enabled for local (default)

    .LINK
        https://dbatools.io/Copy-DbaCredential

    .EXAMPLE
        PS C:\> Copy-DbaCredential -Source sqlserver2014a -Destination sqlcluster

        Copies all SQL Server Credentials on sqlserver2014a to sqlcluster. If Credentials exist on destination, they will be skipped.

    .EXAMPLE
        PS C:\> Copy-DbaCredential -Source sqlserver2014a -Destination sqlcluster -Name "PowerShell Proxy Account" -Force

        Copies over one SQL Server Credential (PowerShell Proxy Account) from sqlserver to sqlcluster. If the Credential already exists on the destination, it will be dropped and recreated.

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [parameter(Mandatory)]
        [DbaInstanceParameter]$Source,
        [PSCredential]
        $SourceSqlCredential,
        [PSCredential]
        $Credential,
        [parameter(Mandatory)]
        [DbaInstanceParameter[]]$Destination,
        [PSCredential]$DestinationSqlCredential,
        [string[]]$Name,
        [string[]]$ExcludeName,
        [Alias('CredentialIdentity')]
        [string[]]$Identity,
        [Alias('ExcludeCredentialIdentity')]
        [string[]]$ExcludeIdentity,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )
    
    begin {
        if (-not $script:isWindows) {
            Stop-Function -Message "Copy-DbaCredential is only supported on Windows"
            return
        }
        $null = Test-ElevationRequirement -ComputerName $Source.ComputerName

        function Copy-Credential {
            <#
                .SYNOPSIS
                    Copies Credentials from one server to another using a combination of SMO's .Script() and manual password updates.

                .OUTPUT
                    System.Data.DataTable
            #>
            [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSAvoidUsingPlainTextForPassword", "", Justification = "For Credentials")]
            param (
                [string[]]$Credentials,
                [bool]$Force
            )

            Write-Message -Level Verbose -Message "Collecting Credential logins and passwords on $($sourceServer.Name)"
            $sourceCredentials = Get-DecryptedObject -SqlInstance $sourceServer -Type Credential
            $credentialList = Get-DbaCredential -SqlInstance $sourceServer -Name $Name -ExcludeName $ExcludeName -Identity $Identity -ExcludeIdentity $ExcludeIdentity

            Write-Message -Level Verbose -Message "Starting migration"
            foreach ($credential in $credentialList) {
                $destServer.Credentials.Refresh()
                $credentialName = $credential.Name

                $copyCredentialStatus = [pscustomobject]@{
                    SourceServer      = $sourceServer.Name
                    DestinationServer = $destServer.Name
                    Type              = "Credential"
                    Name              = $credentialName
                    Status            = $null
                    Notes             = $null
                    DateTime          = [DbaDateTime](Get-Date)
                }

                if ($null -ne $destServer.Credentials[$credentialName]) {
                    if (!$force) {
                        $copyCredentialStatus.Status = "Skipping"
                        $copyCredentialStatus.Notes = "Already exists on destination"
                        $copyCredentialStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                        Write-Message -Level Verbose -Message "$credentialName exists $($destServer.Name). Skipping."
                        continue
                    } else {
                        if ($Pscmdlet.ShouldProcess($destinstance.Name, "Dropping $identity")) {
                            $destServer.Credentials[$credentialName].Drop()
                            $destServer.Credentials.Refresh()
                        }
                    }
                }

                Write-Message -Level Verbose -Message "Attempting to migrate $credentialName"
                try {
                    $currentCred = $sourceCredentials | Where-Object { $_.Name -eq "[$credentialName]" }
                    $sqlcredentialName = $credentialName.Replace("'", "''")
                    $identity = $currentCred.Identity.Replace("'", "''")
                    $password = $currentCred.Password.Replace("'", "''")
                    if ($Pscmdlet.ShouldProcess($destinstance.Name, "Copying $identity")) {
                        $destServer.Query("CREATE CREDENTIAL [$sqlcredentialName] WITH IDENTITY = N'$identity', SECRET = N'$password'")
                        $destServer.Credentials.Refresh()
                        Write-Message -Level Verbose -Message "$credentialName successfully copied"
                    }

                    $copyCredentialStatus.Status = "Successful"
                    $copyCredentialStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                } catch {
                    $copyCredentialStatus.Status = "Failed"
                    $copyCredentialStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                    Stop-Function -Message "Error creating credential" -Target $credentialName -ErrorRecord $_
                }
            }
        }

        try {
            $sourceServer = Connect-SqlInstance -SqlInstance $Source -SqlCredential $SourceSqlCredential -MinimumVersion 9
        } catch {
            Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance
            return
        }

        if ($null -ne $SourceSqlCredential.Username) {
            Write-Message -Level Verbose -Message "You are using SQL credentials and this script requires Windows admin access to the $Source server. Trying anyway."
        }

        $sourceNetBios = Resolve-NetBiosName $sourceServer

        Invoke-SmoCheck -SqlInstance $sourceServer

        Write-Message -Level Verbose -Message "Checking if Remote Registry is enabled on $source"
        try {
            Invoke-Command2 -ComputerName $sourceNetBios -Credential $credential -ScriptBlock { Get-ItemProperty -Path "HKLM:\SOFTWARE\" }
        } catch {
            Stop-Function -Message "Can't connect to registry on $source" -Target $sourceNetBios -ErrorRecord $_
            return
        }
    }
    process {
        if (Test-FunctionInterrupt) { return }

        foreach ($destinstance in $Destination) {
            try {
                $destServer = Connect-SqlInstance -SqlInstance $destinstance -SqlCredential $DestinationSqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $destinstance -Continue
            }
            Invoke-SmoCheck -SqlInstance $destServer

            Copy-Credential $credentials -force:$force
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Copy-SqlCredential
    }
}

tools\dbatools\functions\Copy-DbaCustomError.ps1

function Copy-DbaCustomError {
    <#
    .SYNOPSIS
        Copy-DbaCustomError migrates custom errors (user defined messages), by the custom error ID, from one SQL Server to another.

    .DESCRIPTION
        By default, all custom errors are copied. The -CustomError parameter is auto-populated for command-line completion and can be used to copy only specific custom errors.

        If the custom error already exists on the destination, it will be skipped unless -Force is used. The us_english version must be created first. If you drop the us_english version, all the other languages will be dropped for that specific ID as well.

    .PARAMETER Source
        Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.

    .PARAMETER SourceSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Destination
        Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.

    .PARAMETER DestinationSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER CustomError
        The custom error(s) to process. This list is auto-populated from the server. If unspecified, all custom errors will be processed.

    .PARAMETER ExcludeCustomError
        The custom error(s) to exclude. This list is auto-populated from the server.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER Force
        If this switch is enabled, the custom error will be dropped and recreated if it already exists on Destination.

    .NOTES
        Tags: Migration, CustomError
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        Requires: sysadmin access on SQL Servers

    .LINK
        https://dbatools.io/Copy-DbaCustomError

    .EXAMPLE
        PS C:\> Copy-DbaCustomError -Source sqlserver2014a -Destination sqlcluster

        Copies all server custom errors from sqlserver2014a to sqlcluster using Windows credentials. If custom errors with the same name exist on sqlcluster, they will be skipped.

    .EXAMPLE
        PS C:\> Copy-DbaCustomError -Source sqlserver2014a -SourceSqlCredential $scred -Destination sqlcluster -DestinationSqlCredential $dcred -CustomError 60000 -Force

        Copies only the custom error with ID number 60000 from sqlserver2014a to sqlcluster using SQL credentials for sqlserver2014a and Windows credentials for sqlcluster. If a custom error with the same name exists on sqlcluster, it will be updated because -Force was used.

    .EXAMPLE
        PS C:\> Copy-DbaCustomError -Source sqlserver2014a -Destination sqlcluster -ExcludeCustomError 60000 -Force

        Copies all the custom errors found on sqlserver2014a except the custom error with ID number 60000 to sqlcluster. If a custom error with the same name exists on sqlcluster, it will be updated because -Force was used.

    .EXAMPLE
        PS C:\> Copy-DbaCustomError -Source sqlserver2014a -Destination sqlcluster -WhatIf -Force

        Shows what would happen if the command were executed using force.

    #>
    [CmdletBinding(DefaultParameterSetName = "Default", SupportsShouldProcess)]
    param (
        [parameter(Mandatory)]
        [DbaInstanceParameter]$Source,
        [PSCredential]
        $SourceSqlCredential,
        [parameter(Mandatory)]
        [DbaInstanceParameter[]]$Destination,
        [PSCredential]
        $DestinationSqlCredential,
        [object[]]$CustomError,
        [object[]]$ExcludeCustomError,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        try {
            $sourceServer = Connect-SqlInstance -SqlInstance $Source -SqlCredential $SourceSqlCredential -MinimumVersion 9
        } catch {
            Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $Source
            return
        }
        $orderedCustomErrors = @($sourceServer.UserDefinedMessages | Where-Object Language -eq "us_english")
        $orderedCustomErrors += $sourceServer.UserDefinedMessages | Where-Object Language -ne "us_english"
    }
    process {
        if (Test-FunctionInterrupt) { return }
        foreach ($destinstance in $Destination) {
            try {
                $destServer = Connect-SqlInstance -SqlInstance $destinstance -SqlCredential $DestinationSqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $destinstance -Continue
            }
            # US has to go first
            $destCustomErrors = $destServer.UserDefinedMessages

            foreach ($currentCustomError in $orderedCustomErrors) {
                $customErrorId = $currentCustomError.ID
                $language = $currentCustomError.Language.ToString()

                $copyCustomErrorStatus = [pscustomobject]@{
                    SourceServer      = $sourceServer.Name
                    DestinationServer = $destServer.Name
                    Type              = "Custom error"
                    Name              = $currentCustomError
                    Status            = $null
                    Notes             = $null
                    DateTime          = [DbaDateTime](Get-Date)
                }

                if ($CustomError -and ($customErrorId -notin $CustomError -or $customErrorId -in $ExcludeCustomError)) {
                    continue
                }

                if ($destCustomErrors.ID -contains $customErrorId) {
                    if ($force -eq $false) {
                        $copyCustomErrorStatus.Status = "Skipped"
                        $copyCustomErrorStatus.Notes = "Already exists on destination"
                        $copyCustomErrorStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                        Write-Message -Level Verbose -Message "Custom error $customErrorId $language exists at destination. Use -Force to drop and migrate."
                        continue
                    } else {
                        If ($Pscmdlet.ShouldProcess($destinstance, "Dropping custom error $customErrorId $language and recreating")) {
                            try {
                                Write-Message -Level Verbose -Message "Dropping custom error $customErrorId (drops all languages for custom error $customErrorId)"
                                $destServer.UserDefinedMessages[$customErrorId, $language].Drop()
                            } catch {
                                $copyCustomErrorStatus.Status = "Failed"
                                $copyCustomErrorStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                                Stop-Function -Message "Issue dropping custom error" -Target $customErrorId -ErrorRecord $_ -Continue
                            }
                        }
                    }
                }

                if ($Pscmdlet.ShouldProcess($destinstance, "Creating custom error $customErrorId $language")) {
                    try {
                        Write-Message -Level Verbose -Message "Copying custom error $customErrorId $language"
                        $sql = $currentCustomError.Script() | Out-String
                        Write-Message -Level Debug -Message $sql
                        $destServer.Query($sql)

                        $copyCustomErrorStatus.Status = "Successful"
                        $copyCustomErrorStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                    } catch {
                        $copyCustomErrorStatus.Status = "Failed"
                        $copyCustomErrorStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                        Stop-Function -Message "Issue creating custom error" -Target $customErrorId -ErrorRecord $_
                    }
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Copy-SqlCustomError
    }
}

tools\dbatools\functions\Copy-DbaDatabase.ps1

function Copy-DbaDatabase {
    <#
    .SYNOPSIS
        Migrates SQL Server databases from one SQL Server to another.

    .DESCRIPTION
        This script provides the ability to migrate databases using detach/copy/attach or backup/restore. This script works with named instances, clusters and SQL Server Express Edition.

        By default, databases will be migrated to the destination SQL Server's default data and log directories. You can override this by specifying -ReuseSourceFolderStructure. Filestreams and filegroups are also migrated. Safety is emphasized.

    .PARAMETER Source
        Source SQL Server.

    .PARAMETER SourceSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Destination
        Destination SQL Server. You may specify multiple servers.

        Note that when using -BackupRestore with multiple servers, the backup will only be performed once and backups will be deleted at the end (if you didn't specify -NoBackupCleanup).

        When using -DetachAttach with multiple servers, -Reattach must be specified.

    .PARAMETER DestinationSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        Migrates only specified databases. This list is auto-populated from the server for tab completion. Multiple databases may be specified as a collection.

    .PARAMETER ExcludeDatabase
        Excludes specified databases when performing -AllDatabases migrations. This list is auto-populated from the Source for tab completion.

    .PARAMETER AllDatabases
        If this switch is enabled, all user databases will be migrated. System and support databases will not be migrated. Requires -BackupRestore or -DetachAttach.

    .PARAMETER BackupRestore
        If this switch is enabled, the copy-only backup and restore method will be used to migrate the database(s). This method requires that you specify -SharedPath in a valid UNC format (\\server\share).

        Backups will be immediately deleted after use unless -NoBackupCleanup is specified.

    .PARAMETER SharedPath
        Specifies the network location for the backup files. The SQL Server service accounts must have read/write permission on this path.

    .PARAMETER WithReplace
        If this switch is enabled, the restore is executed with WITH REPLACE.

    .PARAMETER NoRecovery
        If this switch is enabled, the restore is executed with WITH NORECOVERY. Ideal for staging.

    .PARAMETER NoBackupCleanup
        If this switch is enabled, backups generated by this cmdlet will not be deleted after they are restored. The default behavior is to delete these backups.

    .PARAMETER NumberFiles
        Number of files to split the backup. Default is 3.

    .PARAMETER DetachAttach
        If this switch is enabled, the detach/copy/attach method is used to perform database migrations. No files are deleted on Source. If Destination attachment fails, the Source database will be reattached. File copies are performed over administrative shares (\\server\x$\mssql) using BITS. If a database is being mirrored, the mirror will be broken prior to migration.

    .PARAMETER Reattach
        If this switch is enabled, all databases are reattached to Source after DetachAttach migration.

    .PARAMETER SetSourceReadOnly
        If this switch is enabled, all migrated databases are set to ReadOnly on Source prior to detach/attach & backup/restore.

        If -Reattach is used, databases are set to read-only after reattaching.

    .PARAMETER ReuseSourceFolderStructure
        If this switch is enabled, databases will be migrated to a data and log directory structure on Destination mirroring that used on Source. By default, the default data and log directories for Destination will be used when the databases are migrated.

        The structure on Source  will be kept exactly, so consider this if you're migrating between different versions and use part of Microsoft's default Sql structure (MSSql12.INSTANCE, etc)

        To reuse Destination folder structure, use the  -WithReplace switch.

    .PARAMETER IncludeSupportDbs
        If this switch is enabled, ReportServer, ReportServerTempDb, SSISDB, and distribution databases will be copied if they exist on Source. A log file named $SOURCE-$destinstance-$date-Sqls.csv will be written to the current directory.

        Use of this switch requires -BackupRestore or -DetachAttach as well.

    .PARAMETER InputObject
        Enables piped input from Get-DbaDatabase

    .PARAMETER UseLastBackup
        Use the last full, diff and logs instead of performing backups. Note that the backups must exist in a location accessible by all destination servers, such a network share.

    .PARAMETER Continue
        If specified, will to attempt to restore transaction log backups on top of existing database(s) in Recovering or Standby states. Only usable with -UseLastBackup

    .PARAMETER NoCopyOnly
        If this switch is enabled, backups will be taken without COPY_ONLY. This will break the LSN backup chain, which will interfere with the restore chain of the database.

        By default this switch is disabled, so backups will be taken with COPY_ONLY. This will preserve the LSN backup chain.

        For more details please refer to this MSDN article - https://msdn.microsoft.com/en-us/library/ms191495.aspx

    .PARAMETER NewName
        If a single database is being copied, this will be used to rename the database during the copy process. Any occurrence of the original database name in the physical file names will be replaced with NewName
        If specified with multiple databases a warning will be raised and the copy stopped

        This option is mutually exclusive of Prefix

    .PARAMETER Prefix
        All copied database names and physical files will be prefixed with this string

        This option is mutually exclusive of NewName

    .PARAMETER SetSourceOffline
        If this switch is enabled, the Source database will be set to Offline after being copied.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER Force
        If this switch is enabled, existing databases on Destination with matching names from Source will be dropped. If using -DetachReattach, mirrors will be broken and the database(s) dropped from Availability Groups.

    .NOTES
        Tags: Migration, Backup, Restore
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        Requires: sysadmin access on SQL Servers

        Limitations:
        - Doesn't cover what it doesn't cover (replication, certificates, etc)
        - SQL Server 2000 databases cannot be directly migrated to SQL Server 2012 and above.
        - Logins within SQL Server 2012 and above logins cannot be migrated to SQL Server 2008 R2 and below.

    .LINK
        https://dbatools.io/Copy-DbaDatabase

    .EXAMPLE
        PS C:\> Copy-DbaDatabase -Source sql2014a -Destination sql2014b -Database TestDB -BackupRestore -SharedPath \\fileshare\sql\migration

        Migrates a single user database TestDB using Backup and restore from instance sql2014a to sql2014b. Backup files are stored in \\fileshare\sql\migration.

    .EXAMPLE
        PS C:\> Copy-DbaDatabase -Source sql2012 -Destination sql2014, sql2016 -DetachAttach -Reattach

        Databases will be migrated from sql2012 to both sql2014 and sql2016 using the detach/copy files/attach method.The following will be performed: kick all users out of the database, detach all data/log files, move files across the network over an admin share (\\SqlSERVER\M$\MSSql...), attach file on destination server, reattach at source. If the database files (*.mdf, *.ndf, *.ldf) on *destination* exist and aren't in use, they will be overwritten.

    .EXAMPLE
        PS C:\> Copy-DbaDatabase -Source sql2014a -Destination sqlcluster, sql2016 -BackupRestore -UseLastBackup -Force

        Migrates all user databases to sqlcluster and sql2016 using the last Full, Diff and Log backups from sql204a. If the databases exists on the destinations, they will be dropped prior to attach.

        Note that the backups must exist in a location accessible by all destination servers, such a network share.

    .EXAMPLE
        PS C:\> Copy-DbaDatabase -Source sql2014a -Destination sqlcluster -ExcludeDatabase Northwind, pubs -IncludeSupportDbs -Force -BackupRestore -SharedPath \\fileshare\sql\migration

        Migrates all user databases except for Northwind and pubs by using backup/restore (copy-only). Backup files are stored in \\fileshare\sql\migration. If the database exists on the destination, it will be dropped prior to attach.

        It also includes the support databases (ReportServer, ReportServerTempDb, distribution).

    #>
    [CmdletBinding(DefaultParameterSetName = "DbBackup", SupportsShouldProcess)]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseOutputTypeCorrectly", "", Justification = "PSSA Rule Ignored by BOH")]
    param (
        [DbaInstanceParameter]$Source,
        [PSCredential]$SourceSqlCredential,
        [parameter(Mandatory)]
        [DbaInstanceParameter[]]$Destination,
        [PSCredential]$DestinationSqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [Alias("All")]
        [parameter(ParameterSetName = "DbBackup")]
        [parameter(ParameterSetName = "DbAttachDetach")]
        [switch]$AllDatabases,
        [parameter(Mandatory, ParameterSetName = "DbBackup")]
        [switch]$BackupRestore,
        [Alias("NetworkShare")]
        [parameter(ParameterSetName = "DbBackup",
            HelpMessage = "Specify a valid network share in the format \\server\share that can be accessed by your account and the SQL Server service accounts for both Source and Destination.")]
        [string]$SharedPath,
        [parameter(ParameterSetName = "DbBackup")]
        [switch]$WithReplace,
        [parameter(ParameterSetName = "DbBackup")]
        [switch]$NoRecovery,
        [parameter(ParameterSetName = "DbBackup")]
        [switch]$NoBackupCleanup,
        [parameter(ParameterSetName = "DbBackup")]
        [ValidateRange(1, 64)]
        [int]$NumberFiles = 3,
        [parameter(Mandatory, ParameterSetName = "DbAttachDetach")]
        [switch]$DetachAttach,
        [parameter(ParameterSetName = "DbAttachDetach")]
        [switch]$Reattach,
        [parameter(ParameterSetName = "DbBackup")]
        [parameter(ParameterSetName = "DbAttachDetach")]
        [switch]$SetSourceReadOnly,
        [Alias("ReuseFolderStructure")]
        [parameter(ParameterSetName = "DbBackup")]
        [parameter(ParameterSetName = "DbAttachDetach")]
        [switch]$ReuseSourceFolderStructure,
        [parameter(ParameterSetName = "DbBackup")]
        [parameter(ParameterSetName = "DbAttachDetach")]
        [switch]$IncludeSupportDbs,
        [parameter(ParameterSetName = "DbBackup")]
        [switch]$UseLastBackup,
        [parameter(ParameterSetName = "DbBackup")]
        [switch]$Continue,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Database[]]$InputObject,
        [switch]$NoCopyOnly,
        [switch]$SetSourceOffline,
        [string]$NewName,
        [string]$Prefix,
        [switch]$Force,
        [switch]$EnableException
    )
    begin {
        Test-DbaDeprecation -DeprecatedOn 1.0.0 -Parameter NetworkShare -CustomMessage "Using the parameter NetworkShare is deprecated. This parameter will be removed in version 1.0.0 or before. Use SharedPath instead."

        $CopyOnly = -not $NoCopyOnly

        if ($BackupRestore -and (-not $SharedPath -and -not $UseLastBackup)) {
            Stop-Function -Message "When using -BackupRestore, you must specify -SharedPath or -UseLastBackup"
            return
        }
        if ($SharedPath -and $UseLastBackup) {
            Stop-Function -Message "-SharedPath cannot be used with -UseLastBackup because the backup path is determined by the paths in the last backups"
            return
        }
        if ($DetachAttach -and -not $Reattach -and $Destination.Count -gt 1) {
            Stop-Function -Message "When using -DetachAttach with multiple servers, you must specify -Reattach to reattach database at source"
            return
        }
        if ($Continue -and -not $UseLastBackup) {
            Stop-Function -Message "-Continue cannot be used without -UseLastBackup"
            return
        }

        function Join-Path {
            <#
        An internal command that does not require the local path to exist

        Boo, this does not work, but keeping it for future ref.
        #>
            [CmdletBinding()]
            param (
                [string]$Path,
                [string]$ChildPath
            )
            process {
                try {
                    [IO.Path]::Combine($Path, $ChildPath)
                } catch {
                    "$Path\$ChildPath"
                }
            }
        }

        function Join-AdminUnc {
            <#
        .SYNOPSIS
        Internal function. Parses a path to make it an admin UNC.
        #>
            [CmdletBinding()]
            param (
                [Parameter(Mandatory)]
                [ValidateNotNullOrEmpty()]
                [string]$servername,
                [Parameter(Mandatory)]
                [ValidateNotNullOrEmpty()]
                [string]$filepath

            )

            if ($script:sameserver -or (-not $script:isWindows)) {
                return $filepath
            }
            if (-not $filepath) {
                return
            }
            if ($filepath.StartsWith("\\")) {
                return $filepath
            }

            $servername = $servername.Split("\")[0]

            if ($filepath -and $filepath -ne [System.DbNull]::Value) {
                $newpath = Join-Path "\\$servername\" $filepath.replace(':', '$')
                return $newpath
            } else {
                return
            }
        }

        function Get-SqlFileStructure {
            $dbcollection = @{
            };
            $databaseProgressbar = 0

            foreach ($db in $databaseList) {
                Write-Progress -Id 1 -Activity "Processing database file structure" -PercentComplete ($databaseProgressbar / $dbCount * 100) -Status "Processing $databaseProgressbar of $dbCount."
                $dbName = $db.Name
                Write-Message -Level Verbose -Message $dbName

                $databaseProgressbar++
                $dbStatus = $db.status.toString()
                if ($dbStatus.StartsWith("Normal") -eq $false) {
                    continue
                }
                $destinstancefiles = @{
                }; $sourcefiles = @{
                }

                $where = "Filetype <> 'LOG' and Filetype <> 'FULLTEXT'"

                $datarows = $dbFileTable.Tables.Select("dbname = '$dbName' and $where")

                # Data Files
                foreach ($file in $datarows) {
                    # Destination File Structure
                    $d = @{
                    }
                    if ($ReuseSourceFolderStructure) {
                        $d.physical = $file.filename
                    } elseif ($WithReplace) {
                        $name = $file.Name
                        $destfile = $remoteDbFileTable.Tables[0].Select("dbname = '$dbName' and name = '$name'")
                        $d.physical = $destfile.filename

                        if ($null -eq $d.physical) {
                            $directory = Get-SqlDefaultPaths $destServer data
                            $fileName = Split-Path $file.filename -Leaf
                            $d.physical = "$directory\$fileName"
                        }
                    } else {
                        $directory = Get-SqlDefaultPaths $destServer data
                        $fileName = Split-Path $file.filename -Leaf
                        $d.physical = "$directory\$fileName"
                    }
                    $d.logical = $file.Name

                    $d.remotefilename = Join-AdminUNC $destNetBios $d.physical
                    $destinstancefiles.add($file.Name, $d)

                    # Source File Structure
                    $s = @{
                    }
                    $s.logical = $file.Name
                    $s.physical = $file.filename
                    $s.remotefilename = Join-AdminUNC $sourceNetBios $s.physical
                    $sourcefiles.add($file.Name, $s)
                }

                # Add support for Full Text Catalogs in SQL Server 2005 and below
                if ($sourceServer.VersionMajor -lt 10) {
                    try {
                        $fttable = $null = $sourceServer.Databases[$dbName].ExecuteWithResults('sp_help_fulltext_catalogs')
                        $allrows = $fttable.Tables[0].rows
                    } catch {
                        # Nothing, it's just not enabled
                        # here to avoid an empty catch
                        $null = 1
                    }

                    foreach ($ftc in $allrows) {
                        # Destination File Structure
                        $d = @{
                        }
                        $pre = "sysft_"
                        $name = $ftc.Name
                        $physical = $ftc.Path # RootPath
                        $logical = "$pre$name"
                        if ($ReuseSourceFolderStructure) {
                            $d.physical = $physical
                        } else {
                            $directory = Get-SqlDefaultPaths $destServer data
                            if ($destServer.VersionMajor -lt 10) {
                                $directory = "$directory\FTDATA"
                            }
                            $fileName = Split-Path($physical) -leaf
                            $d.physical = "$directory\$fileName"
                        }
                        $d.logical = $logical
                        $d.remotefilename = Join-AdminUNC $destNetBios $d.physical
                        $destinstancefiles.add($logical, $d)

                        # Source File Structure
                        $s = @{
                        }
                        $pre = "sysft_"
                        $name = $ftc.Name
                        $physical = $ftc.Path # RootPath
                        $logical = "$pre$name"

                        $s.logical = $logical
                        $s.physical = $physical
                        $s.remotefilename = Join-AdminUNC $sourceNetBios $s.physical
                        $sourcefiles.add($logical, $s)
                    }
                }

                $where = "Filetype = 'LOG'"
                $datarows = $dbFileTable.Tables[0].Select("dbname = '$dbName' and $where")

                # Log Files
                foreach ($file in $datarows) {
                    $d = @{
                    }
                    if ($ReuseSourceFolderStructure) {
                        $d.physical = $file.filename
                    } elseif ($WithReplace) {
                        $name = $file.Name
                        $destfile = $remoteDbFileTable.Tables[0].Select("dbname = '$dbName' and name = '$name'")
                        $d.physical = $destfile.filename

                        if ($null -eq $d.physical) {
                            $directory = Get-SqlDefaultPaths $destServer data
                            $fileName = Split-Path $file.filename -Leaf
                            $d.physical = "$directory\$fileName"
                        }
                    } else {
                        $directory = Get-SqlDefaultPaths $destServer log
                        $fileName = Split-Path $file.filename -Leaf
                        $d.physical = "$directory\$fileName"
                    }
                    $d.logical = $file.Name
                    $d.remotefilename = Join-AdminUNC $destNetBios $d.physical
                    $destinstancefiles.add($file.Name, $d)

                    $s = @{
                    }
                    $s.logical = $file.Name
                    $s.physical = $file.filename
                    $s.remotefilename = Join-AdminUNC $sourceNetBios $s.physical
                    $sourcefiles.add($file.Name, $s)
                }

                $location = @{
                }
                $location.add("Destination", $destinstancefiles)
                $location.add("Source", $sourcefiles)
                $dbcollection.Add($($db.Name), $location)
            }

            $fileStructure = [pscustomobject]@{
                "databases" = $dbcollection
            }
            Write-Progress -id 1 -Activity "Processing database file structure" -Status "Completed" -Completed
            return $fileStructure
        }

        function Dismount-SqlDatabase {
            [CmdletBinding()]
            param (
                [object]$server,
                [string]$dbName
            )

            $currentdb = $server.databases[$dbName]
            if ($currentdb.IsMirroringEnabled) {
                try {
                    Write-Message -Level Verbose -Message "Breaking mirror for $dbName"
                    $currentdb.ChangeMirroringState([Microsoft.SqlServer.Management.Smo.MirroringOption]::Off)
                    $currentdb.Alter()
                    $currentdb.Refresh()
                    Write-Message -Level Verbose -Message "Could not break mirror for $dbName. Skipping."
                } catch {
                    Stop-Function -Message "Issue breaking mirror." -Target $dbName -ErrorRecord $_
                    return $false
                }
            }

            if ($currentdb.AvailabilityGroupName) {
                $agName = $currentdb.AvailabilityGroupName
                Write-Message -Level Verbose -Message "Attempting remove from Availability Group $agName."
                try {
                    $server.AvailabilityGroups[$currentdb.AvailabilityGroupName].AvailabilityDatabases[$dbName].Drop()
                    Write-Message -Level Verbose -Message "Successfully removed $dbName from  detach from $agName on $($server.Name)."
                } catch {
                    Stop-Function -Message "Could not remove $dbName from $agName on $($server.Name)." -Target $dbName -ErrorRecord $_
                    return $false
                }
            }

            Write-Message -Level Verbose -Message "Attempting detach from $dbName from $source."

            ####### Using Sql to detach does not modify the $currentdb collection #######

            $server.KillAllProcesses($dbName)

            try {
                $sql = "ALTER DATABASE [$dbName] SET SINGLE_USER WITH ROLLBACK IMMEDIATE"
                Write-Message -Level Verbose -Message $sql
                $null = $server.Query($sql)
                Write-Message -Level Verbose -Message "Successfully set $dbName to single-user from $source."
            } catch {
                Stop-Function -Message "Issue setting database to single-user." -Target $dbName -ErrorRecord $_
            }

            try {
                $sql = "EXEC master.dbo.sp_detach_db N'$dbName'"
                Write-Message -Level Verbose -Message $sql
                $null = $server.Query($sql)
                Write-Message -Level Verbose -Message "Successfully detached $dbName from $source."
                return $true
            } catch {
                Stop-Function -Message "Issue detaching database." -Target $dbName -ErrorRecord $_
                return $false
            }
        }

        function Mount-SqlDatabase {
            [CmdletBinding()]
            param (
                [object]$server,
                [string]$dbName,
                [object]$fileStructure,
                [string]$dbOwner
            )

            if ($null -eq $server.Logins.Item($dbOwner)) {
                try {
                    $dbOwner = ($destServer.logins | Where-Object {
                            $_.id -eq 1
                        }).Name
                } catch {
                    $dbOwner = "sa"
                }
            }
            try {
                $null = $server.AttachDatabase($dbName, $fileStructure, $dbOwner, [Microsoft.SqlServer.Management.Smo.AttachOptions]::None)
                return $true
            } catch {
                Stop-Function -Message "Issue mounting database." -ErrorRecord $_
                return $false
            }
        }

        function Start-SqlFileTransfer {
            <#

            SYNOPSIS
            Internal function. Uses BITS to transfer detached files (.mdf, .ndf, .ldf, and filegroups) to
            another server over admin UNC paths. Locations of data files are kept in the
            custom object generated by Get-SqlFileStructure

            #>
            [CmdletBinding(SupportsShouldProcess)]
            param (
                [object]$fileStructure,
                [string]$dbName
            )
            $filestructure
            $copydb = $fileStructure.databases[$dbName]
            $dbsource = $copydb.source
            $dbdestination = $copydb.destination

            foreach ($file in $dbsource.keys) {
                if ($Pscmdlet.ShouldProcess($file, "Starting Sql File Transfer")) {
                    $remotefilename = $dbdestination[$file].remotefilename
                    $from = $dbsource[$file].remotefilename
                    try {
                        if (Test-Path $from -pathtype container) {
                            $null = New-Item -ItemType Directory -Path $remotefilename -Force
                            Start-BitsTransfer -Source "$from\*.*" -Destination $remotefilename

                            $directories = (Get-ChildItem -recurse $from | Where-Object {
                                    $_.PsIsContainer
                                }).FullName
                            foreach ($directory in $directories) {
                                $newdirectory = $directory.replace($from, $remotefilename)
                                $null = New-Item -ItemType Directory -Path $newdirectory -Force
                                Start-BitsTransfer -Source "$directory\*.*" -Destination $newdirectory
                            }
                        } else {
                            Write-Message -Level Verbose -Message "Copying $from for $dbName."
                            Start-BitsTransfer -Source $from -Destination $remotefilename
                        }
                    } catch {
                        try {
                            # Sometimes BITS trips out temporarily on cloned drives.
                            Start-BitsTransfer -Source $from -Destination $remotefilename
                        } catch {
                            Write-Message -Level Verbose -Message "Start-BitsTransfer did not succeed. Now attempting with Copy-Item - no progress bar will be shown."
                            try {
                                Copy-Item -Path $from -Destination $remotefilename -ErrorAction Stop
                                $remotefilename
                            } catch {
                                Write-Message -Level Verbose -Message "Access denied. This can happen for a number of reasons including issues with cloned disks."
                                Stop-Function -Message "Alternatively, you may need to run PowerShell as Administrator, especially when running on localhost." -Target $from -ErrorRecord $_
                                return
                            }
                        }
                    }
                }
            }
            return $true
        }

        function Start-SqlDetachAttach {
            <#

            .SYNOPSIS
            Internal function. Performs checks, then executes Dismount-SqlDatabase on a database, copies its files to the new server,    then performs Mount-SqlDatabase. $sourceServer and $destServer are SMO server objects.

            $fileStructure is a custom object generated by Get-SqlFileStructure

            #>
            [CmdletBinding(SupportsShouldProcess)]
            param (
                [object]$sourceServer,
                [object]$destServer,
                [object]$fileStructure,
                [string]$dbName
            )
            if ($Pscmdlet.ShouldProcess($dbname, "Starting detaching and re-attaching from $sourceServer to $destServer")) {
                $destfilestructure = New-Object System.Collections.Specialized.StringCollection
                $sourceFileStructure = New-Object System.Collections.Specialized.StringCollection
                $dbOwner = $sourceServer.databases[$dbName].owner
                $destDbName = $fileStructure.databases[$dbName].destinationDbName

                if ($null -eq $dbOwner) {
                    try {
                        $dbOwner = ($destServer.logins | Where-Object {
                                $_.id -eq 1
                            }).Name
                    } catch {
                        $dbOwner = "sa"
                    }
                }

                foreach ($file in $fileStructure.databases[$dbName].destination.values) {
                    $null = $destfilestructure.add($file.physical)
                }
                foreach ($file in $fileStructure.databases[$dbName].source.values) {
                    $null = $sourceFileStructure.add($file.physical)
                }

                $detachresult = Dismount-SqlDatabase $sourceServer $dbName

                if ($detachresult) {

                    $transfer = Start-SqlFileTransfer $fileStructure $dbName
                    if ($transfer -eq $false) {
                        Write-Message -Level Verbose -Message "Could not copy files."
                        return "Could not copy files."
                    }
                    $attachresult = Mount-SqlDatabase $destServer $destDbName $destfilestructure $dbOwner

                    if ($attachresult -eq $true) {
                        # add to added dbs because ATTACH was successful
                        Write-Message -Level Verbose -Message "Successfully attached $dbName to $destinstance."
                        return $true
                    } else {
                        # add to failed because ATTACH was unsuccessful
                        Write-Message -Level Verbose -Message "Could not attach $dbName."
                        return "Could not attach database."
                    }
                } else {
                    # add to failed because DETACH was unsuccessful
                    Write-Message -Level Verbose -Message "Could not detach $dbName."
                    return "Could not detach database."
                }
            }
        }
        $backupCollection = @()
    }
    process {
        if (Test-FunctionInterrupt) {
            return
        }

        # testing twice for whatif reasons
        if ($BackupRestore -and (-not $SharedPath -and -not $UseLastBackup)) {
            Stop-Function -Message "When using -BackupRestore, you must specify -SharedPath or -UseLastBackup"
            return
        }
        if ($SharedPath -and $UseLastBackup) {
            Stop-Function -Message "-SharedPath cannot be used with -UseLastBackup because the backup path is determined by the paths in the last backups"
            return
        }
        if ($DetachAttach -and -not $Reattach -and $Destination.Count -gt 1) {
            Stop-Function -Message "When using -DetachAttach with multiple servers, you must specify -Reattach to reattach database at source"
            return
        }
        if (($AllDatabases -or $IncludeSupportDbs -or $Database) -and !$DetachAttach -and !$BackupRestore) {
            Stop-Function -Message "You must specify -DetachAttach or -BackupRestore when migrating databases."
            return
        }

        if (-not $AllDatabases -and -not $IncludeSupportDbs -and -not $Database -and -not $InputObject) {
            Stop-Function -Message "You must specify a -AllDatabases or -Database to continue."
            return
        }

        if ((Test-Bound 'NewName') -and (Test-Bound 'Prefix')) {
            Stop-Function -Message "NewName and Prefix are exclusive options, cannot specify both"
            return
        }

        if ($InputObject) {
            $Source = $InputObject[0].Parent
            $Database = $InputObject.Name
        }


        if ($Database -contains "master" -or $Database -contains "msdb" -or $Database -contains "tempdb") {
            Stop-Function -Message "Migrating system databases is not currently supported." -Continue
        }

        try {
            $sourceServer = Connect-SqlInstance -SqlInstance $Source -SqlCredential $SourceSqlCredential
        } catch {
            Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $Source
            return
        }

        Invoke-SmoCheck -SqlInstance $sourceServer
        $sourceNetBios = $sourceServer.ComputerName

        Write-Message -Level Verbose -Message "Ensuring user databases exist (counting databases)."

        if ($sourceserver.Databases.IsSystemObject -notcontains $false) {
            Stop-Function -Message "No user databases to migrate"
            return
        }

        foreach ($destinstance in $Destination) {
            try {
                $destServer = Connect-SqlInstance -SqlInstance $destinstance -SqlCredential $DestinationSqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $destinstance -Continue
            }

            if ($sourceServer.ComputerName -eq $destServer.ComputerName) {
                $script:sameserver = $true
            } else {
                $script:sameserver = $false
            }

            if ($script:sameserver -and $DetachAttach) {
                if (-not (Test-ElevationRequirement -ComputerName $sourceServer)) {
                    return
                }
            }

            $destVersionLower = $destServer.VersionMajor -lt $sourceServer.VersionMajor
            $destVersionMinorLow = ($destServer.VersionMajor -eq 10 -and $sourceServer.VersionMajor -eq 10) -and ($destServer.VersionMinor -lt $sourceServer.VersionMinor)

            if ($destVersionLower -or $destVersionMinorLow) {
                Stop-Function -Message "Error: copy database cannot be made from newer $($sourceServer.VersionString) to older $($destServer.VersionString) SQL Server version."
                return
            }

            if ($DetachAttach) {
                if ($sourceServer.ComputerName -eq $env:COMPUTERNAME -or $destServer.ComputerName -eq $env:COMPUTERNAME) {
                    if (-not ([Security.Principal.WindowsPrincipal][Security.Principal.WindowsIdentity]::GetCurrent()).IsInRole([Security.Principal.WindowsBuiltInRole] "Administrator")) {
                        Write-Message -Level Verbose -Message "When running DetachAttach locally on the console, it's possible you'll need to Run As Administrator. Trying anyway."
                    }
                }
            }

            if ($SharedPath) {
                if ($(Test-DbaPath -SqlInstance $sourceServer -Path $SharedPath) -eq $false) {
                    Write-Message -Level Verbose -Message "$Source may not be able to access $SharedPath. Trying anyway."
                }

                if ($(Test-DbaPath -SqlInstance $destServer -Path $SharedPath) -eq $false) {
                    Write-Message -Level Verbose -Message "$destinstance may not be able to access $SharedPath. Trying anyway."
                }

                if ($SharedPath.StartsWith('\\')) {
                    try {
                        $shareServer = ($SharedPath -split "\\")[2]
                        $hostEntry = ([Net.Dns]::GetHostEntry($shareServer)).HostName -split "\."

                        if ($shareServer -ne $hostEntry[0]) {
                            Write-Message -Level Verbose -Message "Using CNAME records for the network share may present an issue if an SPN has not been created. Trying anyway. If it doesn't work, use a different (A record) hostname."
                        }
                    } catch {
                        Stop-Function -Message "Error validating unc path: $_"
                        return
                    }
                }
            }

            $destNetBios = $destserver.ComputerName

            Write-Message -Level Verbose -Message "Performing SMO version check."
            Invoke-SmoCheck -SqlInstance $destServer

            Write-Message -Level Verbose -Message "Checking to ensure the source isn't the same as the destination."
            if ($source -eq $destinstance) {
                Stop-Function -Message "Source and Destination SQL Servers instances are the same. Quitting." -Continue
            }

            Write-Message -Level Verbose -Message "Checking to ensure server is not SQL Server 7 or below."
            if ($sourceServer.VersionMajor -lt 8 -and $destServer.VersionMajor -lt 8) {
                Stop-Function -Message "This script can only be run on SQL Server 2000 and above. Quitting." -Continue
            }

            Write-Message -Level Verbose -Message "Checking to ensure detach/attach is not attempted on SQL Server 2000."
            if ($destServer.VersionMajor -lt 9 -and $DetachAttach) {
                Stop-Function -Message "Detach/Attach not supported when destination SQL Server is version 2000. Quitting." -Target $destServer -Continue
            }

            Write-Message -Level Verbose -Message "Checking to ensure SQL Server 2000 migration isn't directly attempted to SQL Server 2012."
            if ($sourceServer.VersionMajor -lt 9 -and $destServer.VersionMajor -gt 10) {
                Stop-Function -Message "SQL Server 2000 databases cannot be migrated to SQL Server versions 2012 and above. Quitting." -Target $destServer -Continue
            }

            Write-Message -Level Verbose -Message "Warning if migration from 2005 to 2012 and above and attach/detach is used."
            if ($sourceServer.VersionMajor -eq 9 -and $destServer.VersionMajor -gt 9 -and !$BackupRestore -and !$Force -and $DetachAttach) {
                Stop-Function -Message "Backup and restore is the safest method for migrating from SQL Server 2005 to other SQL Server versions. Please use the -BackupRestore switch or override this requirement by specifying -Force." -Continue
            }

            if ($sourceServer.Collation -ne $destServer.Collation) {
                Write-Message -Level Verbose -Message "Warning on different collation."
                Write-Message -Level Verbose -Message "Collation on $Source, $($sourceServer.Collation) differs from the $destinstance, $($destServer.Collation)."
            }

            Write-Message -Level Verbose -Message "Ensuring destination server version is equal to or greater than source."
            if ($sourceServer.VersionMajor -ge $destServer.VersionMajor) {
                if ($sourceServer.VersionMinor -gt $destServer.VersionMinor) {
                    Stop-Function -Message "Source SQL Server version build must be <= destination SQL Server for database migration." -Continue
                }
            }

            # SMO's filestreamlevel is sometimes null
            $sql = "select coalesce(SERVERPROPERTY('FilestreamConfiguredLevel'),0) as fs"
            $sourceFilestream = $sourceServer.ConnectionContext.ExecuteScalar($sql)
            $destFilestream = $destServer.ConnectionContext.ExecuteScalar($sql)
            if ($sourceFilestream -gt 0 -and $destFilestream -eq 0) {
                $fsWarning = $true
            }

            Write-Message -Level Verbose -Message "Writing warning about filestream being enabled."
            if ($fsWarning) {
                Write-Message -Level Verbose -Message "FILESTREAM enabled on $source but not $destinstance. Databases that use FILESTREAM will be skipped."
            }

            if ($DetachAttach -eq $true) {
                Write-Message -Level Verbose -Message "Checking access to remote directories."
                $remoteSourcePath = Join-AdminUNC $sourceNetBios (Get-SqlDefaultPaths -SqlInstance $sourceServer -filetype data)

                if ((Test-Path $remoteSourcePath) -ne $true -and $DetachAttach) {
                    Write-Message -Level Warning -Message "Can't access remote Sql directories on $source which is required to perform detach/copy/attach."
                    Write-Message -Level Warning -Message "You can manually try accessing $remoteSourcePath to diagnose any issues."
                    Stop-Function -Message "Halting database migration"
                    return
                }

                $remoteDestPath = Join-AdminUNC $destNetBios (Get-SqlDefaultPaths -SqlInstance $destServer -filetype data)
                If ((Test-Path $remoteDestPath) -ne $true -and $DetachAttach) {
                    Write-Message -Level Warning -Message "Can't access remote Sql directories on $destinstance which is required to perform detach/copy/attach."
                    Write-Message -Level Warning -Message "You can manually try accessing $remoteDestPath to diagnose any issues."
                    Stop-Function -Message "Halting database migration" -Continue
                }
            }

            if (($Database -or $ExcludeDatabase -or $IncludeSupportDbs) -and (!$DetachAttach -and !$BackupRestore)) {
                Stop-Function -Message "You did not select a migration method. Please use -BackupRestore or -DetachAttach."
                return
            }

            if ((!$Database -and !$AllDatabases -and !$IncludeSupportDbs) -and ($DetachAttach -or $BackupRestore)) {
                Stop-Function -Message "You did not select any databases to migrate. Please use -AllDatabases or -Database or -IncludeSupportDbs."
                return
            }

            Write-Message -Level Verbose -Message "Building database list."
            $databaseList = New-Object System.Collections.ArrayList
            $SupportDBs = "ReportServer", "ReportServerTempDB", "distribution"
            foreach ($currentdb in ($sourceServer.Databases | Where-Object IsAccessible)) {
                $dbName = $currentdb.Name
                $dbOwner = $currentdb.Owner

                if ($currentdb.Id -le 4) {
                    continue
                }
                if ($Database -and $Database -notcontains $dbName) {
                    continue
                }
                if ($IncludeSupportDBs -eq $false -and $SupportDBs -contains $dbName) {
                    continue
                }
                if ($IncludeSupportDBs -eq $true -and $SupportDBs -notcontains $dbName) {
                    if ($AllDatabases -eq $false -and $Database.length -eq 0) {
                        continue
                    }
                }
                $null = $databaseList.Add($currentdb)
            }

            Write-Message -Level Verbose -Message "Performing count."
            $dbCount = $databaseList.Count

            if ((Test-Bound 'NewName') -and $dbCount -gt 1) {
                Stop-Function -Message "Cannot use NewName when copying multiple databases"
                return
            }


            Write-Message -Level Verbose -Message "Building file structure inventory for $dbCount databases."

            if ($sourceServer.VersionMajor -eq 8) {
                $sql = "select DB_NAME (dbid) as dbname, name, filename, CASE WHEN groupid = 0 THEN 'LOG' ELSE 'ROWS' END as filetype from sysaltfiles"
            } else {
                $sql = "SELECT db.Name AS dbname, type_desc AS FileType, mf.Name, Physical_Name AS filename FROM sys.master_files mf INNER JOIN  sys.databases db ON db.database_id = mf.database_id"
            }

            $dbFileTable = $sourceServer.Databases['master'].ExecuteWithResults($sql)

            if ($destServer.VersionMajor -eq 8) {
                $sql = "select DB_NAME (dbid) as dbname, name, filename, CASE WHEN groupid = 0 THEN 'LOG' ELSE 'ROWS' END as filetype from sysaltfiles"
            } else {
                $sql = "SELECT db.Name AS dbname, type_desc AS FileType, mf.Name, Physical_Name AS filename FROM sys.master_files mf INNER JOIN  sys.databases db ON db.database_id = mf.database_id"
            }

            $remoteDbFileTable = $destServer.Databases['master'].ExecuteWithResults($sql)

            $fileStructure = Get-SqlFileStructure -sourceserver $sourceServer -destserver $destServer -databaselist $databaseList -ReuseSourceFolderStructure $ReuseSourceFolderStructure

            $elapsed = [System.Diagnostics.Stopwatch]::StartNew()
            $started = Get-Date
            $script:TimeNow = (Get-Date -UFormat "%m%d%Y%H%M%S")

            if ($AllDatabases -or $ExcludeDatabase -or $IncludeSupportDbs -or $Database) {
                foreach ($currentdb in $databaseList) {
                    $dbName = $currentdb.Name
                    $dbOwner = $currentdb.Owner
                    $destinationDbName = $dbName
                    if ((Test-Bound "NewName")) {
                        Write-Message -Level Verbose -Message "NewName specified, copying $dbname as $NewName"
                        $destinationDbName = $NewName
                        $replaceInFile = $True
                    }
                    if ($(Test-Bound "Prefix")) {
                        $destinationDbName = $prefix + $destinationDbName
                        Write-Message -Level Verbose -Message "Prefix supplied, copying $dbname as $destinationDbName"
                    }

                    $filestructure.databases[$dbname].Add('destinationDbName', $destinationDbName)
                    ForEach ($key in $filestructure.databases[$dbname].Destination.Keys) {
                        $splitFileName = Split-Path $fileStructure.databases[$dbname].Destination[$key].remotefilename -Leaf
                        $SplitPath = Split-Path $fileStructure.databases[$dbname].Destination[$key].remotefilename
                        if ($replaceInFile) {
                            $splitFileName = $splitFileName.replace($dbname, $destinationDbName)
                        }
                        $splitFileName = $prefix + $splitFileName
                        $filestructure.databases[$dbname].Destination.$key.remotefilename = Join-Path $SplitPath $splitFileName
                        $splitFileName = Split-Path $filestructure.databases[$dbname].Destination[$key].physical -Leaf
                        $SplitPath = Split-Path $fileStructure.databases[$dbname].Destination[$key].physical
                        if ($replaceInFile) {
                            $splitFileName = $splitFileName.replace($dbname, $destinationDbName)
                        }
                        $splitFileName = $prefix + $splitFileName
                        $filestructure.databases[$dbname].Destination.$key.physical = Join-Path $SplitPath $splitFileName
                    }

                    $copyDatabaseStatus = [pscustomobject]@{
                        SourceServer        = $sourceServer.Name
                        DestinationServer   = $destServer.Name
                        Name                = $dbName
                        DestinationDatabase = $DestinationDbname
                        Type                = "Database"
                        Status              = $null
                        Notes               = $null
                        DateTime            = [DbaDateTime](Get-Date)
                    }

                    Write-Message -Level Verbose -Message "`n######### Database: $dbName #########"
                    $dbStart = Get-Date

                    if ($ExcludeDatabase -contains $dbName) {
                        Write-Message -Level Verbose -Message "$dbName excluded. Skipping."
                        continue
                    }

                    Write-Message -Level Verbose -Message "Checking for accessibility."
                    if ($currentdb.IsAccessible -eq $false) {
                        if ($Pscmdlet.ShouldProcess($destinstance, "Skipping $dbName. Database is inaccessible.")) {
                            Write-Message -Level Verbose -Message "Skipping $dbName. Database is inaccessible."

                            $copyDatabaseStatus.Status = "Skipped"
                            $copyDatabaseStatus.Notes = "Database is not accessible"
                            $copyDatabaseStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                        }
                        continue
                    }

                    if ($fsWarning) {
                        $fsRows = $dbFileTable.Tables[0].Select("dbname = '$dbName' and FileType = 'FileStream'")

                        if ($fsRows.Count -gt 0) {
                            if ($Pscmdlet.ShouldProcess($destinstance, "Skipping $dbName (contains FILESTREAM).")) {
                                Write-Message -Level Verbose -Message "Skipping $dbName (contains FILESTREAM)."
                                $copyDatabaseStatus.Status = "Skipped"
                                $copyDatabaseStatus.Notes = "Contains FILESTREAM"
                                $copyDatabaseStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                            }
                            continue
                        }
                    }

                    if ($ReuseSourceFolderStructure) {
                        $fgRows = $dbFileTable.Tables[0].Select("dbname = '$dbName' and FileType = 'ROWS'")[0]
                        $remotePath = Split-Path $fgRows.Filename

                        if (!(Test-DbaPath -SqlInstance $destServer -Path $remotePath)) {
                            if ($Pscmdlet.ShouldProcess($destinstance, "$remotePath does not exist on $destinstance and ReuseSourceFolderStructure was specified")) {
                                # Stop-Function -Message "Cannot resolve $remotePath on $source. `n`nYou have specified ReuseSourceFolderStructure and exact folder structure does not exist. Halting script."
                                $copyDatabaseStatus.Status = "Failed"
                                $copyDatabaseStatus.Notes = "$remotePath does not exist on $destinstance and ReuseSourceFolderStructure was specified" #"Can't resolve $remotePath"
                                $copyDatabaseStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                            }
                            continue
                        }
                    }

                    Write-Message -Level Verbose -Message "Checking Availability Group status."
                    if ($currentdb.AvailabilityGroupName -and !$force -and $DetachAttach) {
                        $agName = $currentdb.AvailabilityGroupName
                        Write-Message -Level Verbose -Message "Database is part of an Availability Group ($agName). Use -Force to drop from $agName and migrate. Alternatively, you can use the safer backup/restore method."
                        continue
                    }

                    $dbStatus = $currentdb.Status.ToString()

                    if ($dbStatus.StartsWith("Normal") -eq $false) {
                        if ($Pscmdlet.ShouldProcess($destinstance, "$dbName is not in a Normal state. Skipping.")) {
                            Write-Message -Level Verbose -Message "$dbName is not in a Normal state. Skipping."

                            $copyDatabaseStatus.Status = "Skipped"
                            $copyDatabaseStatus.Notes = "Not in normal state"
                            $copyDatabaseStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                        }
                        continue
                    }

                    if ($currentdb.ReplicationOptions -ne "None" -and $DetachAttach -eq $true) {
                        if ($Pscmdlet.ShouldProcess($destinstance, "$dbName is part of replication. Skipping.")) {
                            Write-Message -Level Verbose -Message "$dbName is part of replication. Skipping."

                            $copyDatabaseStatus.Status = "Skipped"
                            $copyDatabaseStatus.Notes = "Part of replication"
                            $copyDatabaseStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                        }
                        continue
                    }

                    if ($currentdb.IsMirroringEnabled -and !$force -and $DetachAttach) {
                        if ($Pscmdlet.ShouldProcess($destinstance, "Database is being mirrored. Use -Force to break mirror and migrate. Alternatively, you can use the safer backup/restore method.")) {
                            Write-Message -Level Verbose -Message "Database is being mirrored. Use -Force to break mirror and migrate. Alternatively, you can use the safer backup/restore method."

                            $copyDatabaseStatus.Status = "Skipped"
                            $copyDatabaseStatus.Notes = "Database is mirrored"
                            $copyDatabaseStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                        }

                        continue
                    }

                    if (($null -ne $destServer.Databases[$DestinationdbName]) -and !$force -and !$WithReplace) {
                        if ($Pscmdlet.ShouldProcess($destinstance, "$DestinationdbName exists at destination. Use -Force to drop and migrate. Aborting routine for this database.")) {
                            Write-Message -Level Verbose -Message "$DestinationdbName exists at destination. Use -Force to drop and migrate. Aborting routine for this database."

                            $copyDatabaseStatus.Status = "Skipped"
                            $copyDatabaseStatus.Notes = "Already exists on destination"
                            $copyDatabaseStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                        }
                        continue
                    } elseif ($null -ne $destServer.Databases[$DestinationdbName] -and $force) {
                        if ($Pscmdlet.ShouldProcess($destinstance, "DROP DATABASE $DestinationdbName")) {
                            Write-Message -Level Verbose -Message "$DestinationdbName already exists. -Force was specified. Dropping $DestinationdbName on $destinstance."
                            $removeresult = Remove-DbaDatabase -SqlInstance $destserver -Database $DestinationdbName -Confirm:$false
                            $dropResult = $removeresult.Status -eq 'Dropped'

                            if ($dropResult -eq $false) {
                                Write-Message -Level Verbose -Message "Database could not be dropped. Aborting routine for this database."

                                $copyDatabaseStatus.Status = "Failed"
                                $copyDatabaseStatus.Notes = "Could not drop database"
                                $copyDatabaseStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                                continue
                            }
                        }
                    }

                    if ($force) {
                        $WithReplace = $true
                    }

                    Write-Message -Level Verbose -Message "Started: $dbStart."

                    if ($sourceServer.VersionMajor -ge 9) {
                        $sourceDbOwnerChaining = $sourceServer.Databases[$dbName].DatabaseOwnershipChaining
                        $sourceDbTrustworthy = $sourceServer.Databases[$dbName].Trustworthy
                        $sourceDbBrokerEnabled = $sourceServer.Databases[$dbName].BrokerEnabled
                    }

                    $sourceDbReadOnly = $sourceServer.Databases[$dbName].ReadOnly

                    if ($SetSourceReadOnly) {
                        If ($Pscmdlet.ShouldProcess($source, "Set $dbName to read-only")) {
                            Write-Message -Level Verbose -Message "Setting database to read-only."
                            try {
                                $result = Set-DbaDbState -SqlInstance $sourceServer -Database $dbName -ReadOnly -EnableException
                            } catch {
                                Stop-Function -Continue -Message "Couldn't set database to read-only. Aborting routine for this database" -ErrorRecord $_
                            }
                        }
                    }

                    if ($BackupRestore) {
                        if ($UseLastBackup) {
                            $whatifmsg = "Gathering last backup information for $dbName from $Source and restoring"
                        } else {
                            $whatifmsg = "Backup $dbName from $source and restoring"
                        }
                        If ($Pscmdlet.ShouldProcess($destinstance, $whatifmsg)) {
                            if ($UseLastBackup) {
                                $backupTmpResult = Get-DbaBackupHistory -SqlInstance $sourceServer -Database $dbName -IncludeCopyOnly -Last
                                if (-not $backupTmpResult) {
                                    $copyDatabaseStatus.Type = "Database (BackupRestore)"
                                    $copyDatabaseStatus.Status = "Failed"
                                    $copyDatabaseStatus.Notes = "No backups for $dbName on $source"
                                    $copyDatabaseStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                                    continue
                                }
                            } else {
                                $backupTmpResult = $backupCollection | Where-Object Database -eq $dbName
                                if (-not $backupTmpResult) {
                                    $backupTmpResult = Backup-DbaDatabase -SqlInstance $sourceServer -Database $dbName -BackupDirectory $SharedPath -FileCount $numberfiles -CopyOnly:$CopyOnly
                                }
                                if ($backupTmpResult) {
                                    $backupCollection += $backupTmpResult
                                }
                                $backupResult = $BackupTmpResult.BackupComplete
                                if (-not $backupResult) {
                                    $serviceAccount = $sourceServer.ServiceAccount
                                    Write-Message -Level Verbose -Message "Backup Failed. Does SQL Server account $serviceAccount have access to $($SharedPath)? Aborting routine for this database."

                                    $copyDatabaseStatus.Status = "Failed"
                                    $copyDatabaseStatus.Notes = "Backup failed. Verify service account access to $SharedPath."
                                    $copyDatabaseStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                                    continue
                                }
                            }
                            Write-Message -Level Verbose -Message "Reuse = $ReuseSourceFolderStructure."
                            try {
                                $msg = $null
                                $restoreResultTmp = $backupTmpResult | Restore-DbaDatabase -SqlInstance $destServer -DatabaseName $DestinationdbName -ReuseSourceFolderStructure:$ReuseSourceFolderStructure -NoRecovery:$NoRecovery -TrustDbBackupHistory -WithReplace:$WithReplace -Continue:$Continue -EnableException -ReplaceDbNameInFile
                            } catch {
                                $msg = $_.Exception.InnerException.InnerException.InnerException.InnerException.Message
                                Stop-Function -Message "Failure attempting to restore $dbName to $destinstance" -Exception $_.Exception.InnerException.InnerException.InnerException.InnerException
                            }
                            $restoreResult = $restoreResultTmp.RestoreComplete

                            if ($restoreResult -eq $true) {
                                Write-Message -Level Verbose -Message "Successfully restored $dbName to $destinstance."
                                $copyDatabaseStatus.Status = "Successful"
                                $copyDatabaseStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                            } else {
                                if ($ReuseSourceFolderStructure) {
                                    Write-Message -Level Verbose -Message "Failed to restore $dbName to $destinstance. You specified -ReuseSourceFolderStructure. Does the exact same destination directory structure exist?"
                                    Write-Message -Level Verbose -Message "Aborting routine for this database."

                                    $copyDatabaseStatus.Status = "Failed"
                                    $copyDatabaseStatus.Notes = "Failed to restore. ReuseSourceFolderStructure was specified, verify same directory structure exist on destination."
                                    $copyDatabaseStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                                    continue
                                } else {
                                    Write-Message -Level Verbose -Message "Failed to restore $dbName to $destinstance. Aborting routine for this database."

                                    $copyDatabaseStatus.Status = "Failed"
                                    if (-not $msg) {
                                        $msg = "Failed to restore database"
                                    }
                                    $copyDatabaseStatus.Notes = $msg
                                    $copyDatabaseStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                                    continue
                                }
                            }
                            if (-not $NoBackupCleanUp -and $Destination.Count -eq 1) {
                                foreach ($backupFile in ($backupTmpResult.BackupPath)) {
                                    try {
                                        if (Test-Path $backupFile -ErrorAction Stop) {
                                            Write-Message -Level Verbose -Message "Deleting $backupFile."
                                            Remove-Item $backupFile -ErrorAction Stop
                                        }
                                    } catch {
                                        try {
                                            Write-Message -Level Verbose -Message "Trying alternate SQL method to delete $backupFile."
                                            $sql = "EXEC master.sys.xp_delete_file 0, '$backupFile'"
                                            Write-Message -Level Debug -Message $sql
                                            $null = $sourceServer.Query($sql)
                                        } catch {
                                            Write-Message -Level Verbose -Message "Cannot delete backup file $backupFile."

                                            # Set NoBackupCleanup so that there's a warning at the end
                                            $NoBackupCleanup = $true
                                        }
                                    }
                                }
                            }
                        }

                        $dbFinish = Get-Date
                        if ($NoRecovery -eq $false) {
                            # needed because the newly restored database doesn't show up
                            $destServer.Databases.Refresh()
                            $dbOwner = $sourceServer.Databases[$dbName].Owner
                            if ($null -eq $dbOwner -or $destServer.Logins.Name -notcontains $dbOwner) {
                                $dbOwner = Get-SaLoginName -SqlInstance $destServer
                            }
                            Write-Message -Level Verbose -Message "Updating database owner to $dbOwner."
                            $OwnerResult = Set-DbaDbOwner -SqlInstance $destServer -Database $dbName -TargetLogin $dbOwner -EnableException
                            if ($OwnerResult.Length -eq 0) {
                                Write-Message -Level Verbose -Message "Failed to update database owner."
                            }
                        }
                    }

                    if ($DetachAttach) {

                        $copyDatabaseStatus.Type = "Database (DetachAttach)"

                        $sourceFileStructure = New-Object System.Collections.Specialized.StringCollection
                        foreach ($file in $fileStructure.Databases[$dbName].Source.Values) {
                            $null = $sourceFileStructure.Add($file.Physical)
                        }

                        $dbOwner = $sourceServer.Databases[$dbName].Owner

                        if ($null -eq $dbOwner -or $destServer.Logins.Name -notcontains $dbOwner) {
                            $dbOwner = Get-SaLoginName -SqlInstance $destServer
                        }

                        if ($Pscmdlet.ShouldProcess($destinstance, "Detach $dbName from $source and attach, then update dbowner")) {
                            $migrationResult = Start-SqlDetachAttach $sourceServer $destServer $fileStructure $dbName

                            $dbFinish = Get-Date

                            if ($reattach -eq $true) {
                                $sourceServer.Databases.Refresh()
                                $destServer.Databases.Refresh()
                                $result = Mount-SqlDatabase $sourceServer $dbName $sourceFileStructure $dbOwner

                                if ($result -eq $true) {
                                    $sourceServer.Databases[$dbName].DatabaseOwnershipChaining = $sourceDbOwnerChaining
                                    $sourceServer.Databases[$dbName].Trustworthy = $sourceDbTrustworthy
                                    $sourceServer.Databases[$dbName].BrokerEnabled = $sourceDbBrokerEnabled
                                    $sourceServer.Databases[$dbName].Alter()

                                    if ($SetSourceReadOnly -or $sourceDbReadOnly) {
                                        try {
                                            $result = Set-DbaDbState -SqlInstance $sourceServer -Database $dbName -ReadOnly -EnableException
                                        } catch {
                                            Stop-Function -Message "Couldn't set database to read-only" -ErrorRecord $_
                                        }
                                    }
                                    Write-Message -Level Verbose -Message "Successfully reattached $dbName to $source."
                                } else {
                                    Write-Message -Level Verbose -Message "Could not reattach $dbName to $source."
                                    $copyDatabaseStatus.Status = "Failed"
                                    $copyDatabaseStatus.Notes = "Could not reattach database to $source"
                                    $copyDatabaseStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                                }
                            }

                            if ($migrationResult -eq $true) {
                                Write-Message -Level Verbose -Message "Successfully attached $dbName to $destinstance."
                                $copyDatabaseStatus.Status = "Successful"
                                $copyDatabaseStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                            } else {
                                Write-Message -Level Verbose -Message "Failed to attach $dbName to $destinstance. Aborting routine for this database."

                                $copyDatabaseStatus.Status = "Failed"
                                $copyDatabaseStatus.Notes = "Failed to attach database to destination"
                                $copyDatabaseStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                                continue
                            }
                        }
                    }
                    $NewDatabase = Get-DbaDatabase -SqlInstance $destServer -database $DestinationdbName

                    # restore potentially lost settings
                    if ($destServer.VersionMajor -ge 9 -and $NoRecovery -eq $false) {
                        if ($sourceDbOwnerChaining -ne $NewDatabase.DatabaseOwnershipChaining) {
                            if ($Pscmdlet.ShouldProcess($destinstance, "Updating DatabaseOwnershipChaining on $DestinationdbName")) {
                                try {
                                    $NewDatabase.DatabaseOwnershipChaining = $sourceDbOwnerChaining
                                    $NewDatabase.Alter()
                                    Write-Message -Level Verbose -Message "Successfully updated DatabaseOwnershipChaining for $sourceDbOwnerChaining on $DestinationdbName on $destinstance."
                                } catch {
                                    $copyDatabaseStatus.Status = "Successful - failed to apply DatabaseOwnershipChaining."
                                    $copyDatabaseStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                                    Stop-Function -Message "Failed to update DatabaseOwnershipChaining for $sourceDbOwnerChaining on $DestinationdbName on $destinstance." -Target $destinstance -ErrorRecord $_ -Continue
                                }
                            }
                        }

                        if ($sourceDbTrustworthy -ne $NewDatabase.Trustworthy) {
                            if ($Pscmdlet.ShouldProcess($destinstance, "Updating Trustworthy on $DestinationdbName")) {
                                try {
                                    $NewDatabase.Trustworthy = $sourceDbTrustworthy
                                    $NewDatabase.Alter()
                                    Write-Message -Level Verbose -Message "Successfully updated Trustworthy to $sourceDbTrustworthy for $DestinationdbName on $destinstance"
                                } catch {
                                    $copyDatabaseStatus.Status = "Successful - failed to apply Trustworthy"
                                    $copyDatabaseStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                                    Stop-Function -Message "Failed to update Trustworthy to $sourceDbTrustworthy for $DestinationdbName on $destinstance." -Target $destinstance -ErrorRecord $_ -Continue
                                }
                            }
                        }

                        if ($sourceDbBrokerEnabled -ne $NewDatabase.BrokerEnabled) {
                            if ($Pscmdlet.ShouldProcess($destinstance, "Updating BrokerEnabled on $dbName")) {
                                try {
                                    $NewDatabase.BrokerEnabled = $sourceDbBrokerEnabled
                                    $NewDatabase.Alter()
                                    Write-Message -Level Verbose -Message "Successfully updated BrokerEnabled to $sourceDbBrokerEnabled for $DestinationdbName on $destinstance."
                                } catch {
                                    $copyDatabaseStatus.Status = "Successful - failed to apply BrokerEnabled"
                                    $copyDatabaseStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                                    Stop-Function -Message "Failed to update BrokerEnabled to $sourceDbBrokerEnabled for $DestinationdbName on $destinstance." -Target $destinstance -ErrorRecord $_ -Continue
                                }
                            }
                        }
                    }

                    if ($sourceDbReadOnly -ne $NewDatabase.ReadOnly -and -not $NoRecovery) {
                        if ($Pscmdlet.ShouldProcess($destinstance, "Updating ReadOnly status on $DestinationdbName")) {
                            try {
                                if ($sourceDbReadOnly) {
                                    $result = Set-DbaDbState -SqlInstance $destserver -Database $DestinationdbName -ReadOnly -EnableException
                                } else {
                                    $result = Set-DbaDbState -SqlInstance $destserver -Database $DestinationdbName -ReadWrite -EnableException
                                }
                            } catch {
                                $copyDatabaseStatus.Status = "Successful - failed to apply ReadOnly."
                                $copyDatabaseStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                                Stop-Function -Message "Failed to update ReadOnly status on $DestinationdbName." -Target $destinstance -ErrorRecord $_ -Continue
                            }
                        }
                    }

                    if ($SetSourceOffline -and $sourceServer.databases[$DestinationdbName].status -notlike '*offline*') {
                        if ($Pscmdlet.ShouldProcess($destinstance, "Setting $DestinationdbName offline on $source")) {
                            Stop-DbaProcess -SqlInstance $sourceServer -Database $DestinationdbName
                            Set-DbaDbState -SqlInstance $sourceServer -SqlCredential $SourceSqlCredential -database $DestinationdbName -Offline
                        }
                    }

                    $dbTotalTime = $dbFinish - $dbStart
                    $dbTotalTime = ($dbTotalTime.ToString().Split(".")[0])

                    Write-Message -Level Verbose -Message "Finished: $dbFinish."
                    Write-Message -Level Verbose -Message "Elapsed time: $dbTotalTime."

                } # end db by db processing
            }
        }
    }
    end {
        if (Test-FunctionInterrupt) {
            return
        }
        if (-not $NoBackupCleanUp -and $Destination.Count -gt 1) {
            foreach ($backupFile in ($backupCollection.BackupPath)) {
                try {
                    if (Test-Path $backupFile -ErrorAction Stop) {
                        Write-Message -Level Verbose -Message "Deleting $backupFile."
                        Remove-Item $backupFile -ErrorAction Stop
                    }
                } catch {
                    try {
                        Write-Message -Level Verbose -Message "Trying alternate SQL method to delete $backupFile."
                        $sql = "EXEC master.sys.xp_delete_file 0, '$backupFile'"
                        Write-Message -Level Debug -Message $sql
                        $null = $sourceServer.Query($sql)
                    } catch {
                        Write-Message -Level Verbose -Message "Cannot delete backup file $backupFile."
                    }
                }
            }
        }
        if (Test-FunctionInterrupt) {
            return
        }
        if ($null -ne $elapsed) {
            $totalTime = ($elapsed.Elapsed.toString().Split(".")[0])

            Write-Message -Level Verbose -Message "`nDatabase migration finished"
            Write-Message -Level Verbose -Message "Migration started: $started"
            Write-Message -Level Verbose -Message "Migration completed: $(Get-Date)"
            Write-Message -Level Verbose -Message "Total Elapsed time: $totalTime"

            if ($SharedPath -and $NoBackupCleanup) {
                Write-Message -Level Verbose -Message "Backups still exist at $SharedPath."
            }
        } else {
            Write-Message -Level Verbose -Message "No work was done, as we stopped during setup phase"
        }
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Copy-SqlDatabase
    }
}

tools\dbatools\functions\Copy-DbaDataCollector.ps1

function Copy-DbaDataCollector {
    <#
    .SYNOPSIS
        Migrates user SQL Data Collector collection sets. SQL Data Collector configuration is on the agenda, but it's hard.

    .DESCRIPTION
        By default, all data collector objects are migrated. If the object already exists on the destination, it will be skipped unless -Force is used.

        The -CollectionSet parameter is auto-populated for command-line completion and can be used to copy only specific objects.

    .PARAMETER Source
        Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2008 or higher.

    .PARAMETER SourceSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Destination
        Destination Sql Server. You must have sysadmin access and server version must be SQL Server version 2008 or higher.

    .PARAMETER DestinationSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER CollectionSet
        The collection set(s) to process - this list is auto-populated from the server. If unspecified, all collection sets will be processed.

    .PARAMETER ExcludeCollectionSet
        The collection set(s) to exclude - this list is auto-populated from the server

    .PARAMETER NoServerReconfig
        Upcoming parameter to enable server reconfiguration

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER Force
        If collection sets exists on destination server, it will be dropped and recreated.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Migration,DataCollection
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        Requires: sysadmin access on SQL Servers

    .LINK
        https://dbatools.io/Copy-DbaDataCollector

    .EXAMPLE
        PS C:\> Copy-DbaDataCollector -Source sqlserver2014a -Destination sqlcluster

        Copies all Data Collector Objects and Configurations from sqlserver2014a to sqlcluster, using Windows credentials.

    .EXAMPLE
        PS C:\> Copy-DbaDataCollector -Source sqlserver2014a -Destination sqlcluster -SourceSqlCredential $cred

        Copies all Data Collector Objects and Configurations from sqlserver2014a to sqlcluster, using SQL credentials for sqlserver2014a and Windows credentials for sqlcluster.

    .EXAMPLE
        PS C:\> Copy-DbaDataCollector -Source sqlserver2014a -Destination sqlcluster -WhatIf

        Shows what would happen if the command were executed.

    .EXAMPLE
        PS C:\> Copy-DbaDataCollector -Source sqlserver2014a -Destination sqlcluster -CollectionSet 'Server Activity', 'Table Usage Analysis'

        Copies two Collection Sets, Server Activity and Table Usage Analysis, from sqlserver2014a to sqlcluster.

    #>
    [CmdletBinding(DefaultParameterSetName = "Default", SupportsShouldProcess)]
    param (
        [parameter(Mandatory)]
        [DbaInstanceParameter]$Source,
        [PSCredential]
        $SourceSqlCredential,
        [parameter(Mandatory)]
        [DbaInstanceParameter[]]$Destination,
        [PSCredential]
        $DestinationSqlCredential,
        [object[]]$CollectionSet,
        [object[]]$ExcludeCollectionSet,
        [switch]$NoServerReconfig,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {
        if (-not $script:isWindows) {
            Stop-Function -Message "Copy-DbaDataCollector does not support Linux - we're still waiting for the Core SMOs from Microsoft"
            return
        }
        try {
            $sourceServer = Connect-SqlInstance -SqlInstance $Source -SqlCredential $SourceSqlCredential -MinimumVersion 10
        } catch {
            Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $Source
            return
        }
        $sourceSqlConn = $sourceServer.ConnectionContext.SqlConnectionObject
        $sourceSqlStoreConnection = New-Object Microsoft.SqlServer.Management.Sdk.Sfc.SqlStoreConnection $sourceSqlConn
        $sourceStore = New-Object Microsoft.SqlServer.Management.Collector.CollectorConfigStore $sourceSqlStoreConnection
        $configDb = $sourceStore.ScriptAlter().GetScript() | Out-String
        $configDb = $configDb -replace [Regex]::Escape("'$source'"), "'$destReplace'"
    }
    process {
        if (Test-FunctionInterrupt) { return }
        foreach ($destinstance in $Destination) {

            try {
                $destServer = Connect-SqlInstance -SqlInstance $destinstance -SqlCredential $DestinationSqlCredential -MinimumVersion 10
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $destinstance -Continue
            }
            if ($NoServerReconfig -eq $false) {
                if ($Pscmdlet.ShouldProcess($destinstance, "Server reconfiguration not yet supported. Only Collection Set migration will be migrated at this time.")) {
                    Write-Message -Level Verbose -Message "Server reconfiguration not yet supported. Only Collection Set migration will be migrated at this time."
                    $NoServerReconfig = $true

                    <# for future use when this support is added #>
                    $copyServerConfigStatus = [pscustomobject]@{
                        SourceServer      = $sourceServer.Name
                        DestinationServer = $destServer.Name
                        Name              = $userName
                        Type              = "Data Collection Server Config"
                        Status            = "Skipped"
                        Notes             = "Not supported at this time"
                        DateTime          = [DbaDateTime](Get-Date)
                    }
                    $copyServerConfigStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                }
            }
            $destSqlConn = $destServer.ConnectionContext.SqlConnectionObject
            $destSqlStoreConnection = New-Object Microsoft.SqlServer.Management.Sdk.Sfc.SqlStoreConnection $destSqlConn
            $destStore = New-Object Microsoft.SqlServer.Management.Collector.CollectorConfigStore $destSqlStoreConnection

            if (!$NoServerReconfig) {
                if ($Pscmdlet.ShouldProcess($destinstance, "Attempting to modify Data Collector configuration")) {
                    try {
                        $sql = "Unknown at this time"
                        $destServer.Query($sql)
                        $destStore.Alter()
                    } catch {
                        $copyServerConfigStatus.Status = "Failed"
                        $copyServerConfigStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                        Stop-Function -Message "Issue modifying Data Collector configuration" -Target $destServer -ErrorRecord $_
                    }
                }
            }

            if ($destStore.Enabled -eq $false) {
                Write-Message -Level Verbose -Message "The Data Collector must be setup initially for Collection Sets to be migrated. Setup the Data Collector and try again."
                continue
            }

            $storeCollectionSets = $sourceStore.CollectionSets | Where-Object { $_.IsSystem -eq $false }
            if ($CollectionSet) {
                $storeCollectionSets = $storeCollectionSets | Where-Object Name -In $CollectionSet
            }
            if ($ExcludeCollectionSet) {
                $storeCollectionSets = $storeCollectionSets | Where-Object Name -NotIn $ExcludeCollectionSet
            }

            Write-Message -Level Verbose -Message "Migrating collection sets"
            foreach ($set in $storeCollectionSets) {
                $collectionName = $set.Name

                $copyCollectionSetStatus = [pscustomobject]@{
                    SourceServer      = $sourceServer.Name
                    DestinationServer = $destServer.Name
                    Name              = $collectionName
                    Type              = "Collection Set"
                    Status            = $null
                    Notes             = $null
                    DateTime          = [DbaDateTime](Get-Date)
                }

                if ($null -ne $destStore.CollectionSets[$collectionName]) {
                    if ($force -eq $false) {
                        if ($Pscmdlet.ShouldProcess($destinstance, "Collection Set '$collectionName' was skipped because it already exists on $destinstance. Use -Force to drop and recreate")) {
                            Write-Message -Level Verbose -Message "Collection Set '$collectionName' was skipped because it already exists on $destinstance. Use -Force to drop and recreate"

                            $copyCollectionSetStatus.Status = "Skipped"
                            $copyCollectionSetStatus.Notes = "Already exists on destination"
                            $copyCollectionSetStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                        }
                        continue
                    } else {
                        if ($Pscmdlet.ShouldProcess($destinstance, "Attempting to drop $collectionName")) {
                            Write-Message -Level Verbose -Message "Collection Set '$collectionName' exists on $destinstance"
                            Write-Message -Level Verbose -Message "Force specified. Dropping $collectionName."

                            try {
                                $destStore.CollectionSets[$collectionName].Drop()
                            } catch {
                                $copyCollectionSetStatus.Status = "Failed to drop on destination"
                                $copyCollectionSetStatus.Notes = (Get-ErrorMessage -Record $_)
                                $copyCollectionSetStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                                Stop-Function -Message "Issue dropping collection" -Target $collectionName -ErrorRecord $_ -Continue
                            }
                        }
                    }
                }

                if ($Pscmdlet.ShouldProcess($destinstance, "Migrating collection set $collectionName")) {
                    try {
                        $sql = $set.ScriptCreate().GetScript() | Out-String
                        $sql = $sql -replace [Regex]::Escape("'$source'"), "'$destinstance'"
                        Write-Message -Level Debug -Message $sql
                        Write-Message -Level Verbose -Message "Migrating collection set $collectionName"
                        $destServer.Query($sql)

                        $copyCollectionSetStatus.Status = "Successful"
                        $copyCollectionSetStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                    } catch {
                        $copyCollectionSetStatus.Status = "Failed to create collection"
                        $copyCollectionSetStatus.Notes = (Get-ErrorMessage -Record $_)

                        Stop-Function -Message "Issue creating collection set" -Target $collectionName -ErrorRecord $_
                    }

                    try {
                        if ($set.IsRunning) {
                            Write-Message -Level Verbose -Message "Starting collection set $collectionName"
                            $destStore.CollectionSets.Refresh()
                            $destStore.CollectionSets[$collectionName].Start()
                        }

                        $copyCollectionSetStatus.Status = "Successful started Collection"
                        $copyCollectionSetStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                    } catch {
                        $copyCollectionSetStatus.Status = "Failed to start collection"
                        $copyCollectionSetStatus.Notes = (Get-ErrorMessage -Record $_)
                        $copyCollectionSetStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                        Stop-Function -Message "Issue starting collection set" -Target $collectionName -ErrorRecord $_
                    }
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Copy-SqlDataCollector
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Copy-DbaSqlDataCollector
        if (Test-FunctionInterrupt) { return }
    }
}

tools\dbatools\functions\Copy-DbaDbAssembly.ps1

function Copy-DbaDbAssembly {
    <#
    .SYNOPSIS
        Copy-DbaDbAssembly migrates assemblies from one SQL Server to another.

    .DESCRIPTION
        By default, all assemblies are copied.

        If the assembly already exists on the destination, it will be skipped unless -Force is used.

        This script does not yet copy dependencies or dependent objects.

    .PARAMETER Source
        Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.

    .PARAMETER SourceSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Destination
        Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.

    .PARAMETER DestinationSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Assembly
        The assembly(ies) to process. This list is auto-populated from the server. If unspecified, all assemblies will be processed.

    .PARAMETER ExcludeAssembly
        The assembly(ies) to exclude. This list is auto-populated from the server.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER Force
        If this switch is enabled, existing assemblies on Destination with matching names from Source will be dropped.

    .NOTES
        Tags: Migration, Assembly
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        Requires: sysadmin access on SQL Servers

    .LINK
        http://dbatools.io/Get-SqlDatabaseAssembly

    .EXAMPLE
        PS C:\> Copy-DbaDbAssembly -Source sqlserver2014a -Destination sqlcluster

        Copies all assemblies from sqlserver2014a to sqlcluster using Windows credentials. If assemblies with the same name exist on sqlcluster, they will be skipped.

    .EXAMPLE
        PS C:\> Copy-DbaDbAssembly -Source sqlserver2014a -Destination sqlcluster -Assembly dbname.assemblyname, dbname3.anotherassembly -SourceSqlCredential $cred -Force

        Copies two assemblies, the dbname.assemblyname and dbname3.anotherassembly from sqlserver2014a to sqlcluster using SQL credentials for sqlserver2014a and Windows credentials for sqlcluster. If an assembly with the same name exists on sqlcluster, it will be dropped and recreated because -Force was used.

        In this example, anotherassembly will be copied to the dbname3 database on the server sqlcluster.

    .EXAMPLE
        PS C:\> Copy-DbaDbAssembly -Source sqlserver2014a -Destination sqlcluster -WhatIf -Force

        Shows what would happen if the command were executed using force.

    #>
    [CmdletBinding(DefaultParameterSetName = "Default", SupportsShouldProcess)]
    param (
        [parameter(Mandatory)]
        [DbaInstanceParameter]$Source,
        [PSCredential]$SourceSqlCredential,
        [parameter(Mandatory)]
        [DbaInstanceParameter[]]$Destination,
        [PSCredential]$DestinationSqlCredential,
        [object[]]$Assembly,
        [object[]]$ExcludeAssembly,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {
        try {
            $sourceServer = Connect-SqlInstance -SqlInstance $Source -SqlCredential $SourceSqlCredential -MinimumVersion 9
        } catch {
            Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $Source
            return
        }
        $sourceAssemblies = @()
        foreach ($database in ($sourceServer.Databases | Where-Object IsAccessible)) {
            Write-Message -Level Verbose -Message "Processing $database on source"

            try {
                # a bug here requires a try/catch
                $userAssemblies = $database.Assemblies | Where-Object IsSystemObject -eq $false
                foreach ($assembly in $userAssemblies) {
                    $sourceAssemblies += $assembly
                }
            } catch {
                #here to avoid an empty catch
                $null = 1
            }
        }
    }
    process {
        if (Test-FunctionInterrupt) { return }
        foreach ($destinstance in $Destination) {
            try {
                $destServer = Connect-SqlInstance -SqlInstance $destinstance -SqlCredential $DestinationSqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $destinstance -Continue
            }

            $destAssemblies = @()
            foreach ($database in $destServer.Databases) {
                Write-Message -Level VeryVerbose -Message "Processing $database on destination"
                try {
                    # a bug here requires a try/catch
                    $userAssemblies = $database.Assemblies | Where-Object IsSystemObject -eq $false
                    foreach ($assembly in $userAssemblies) {
                        $destAssemblies += $assembly
                    }
                } catch {
                    #here to avoid an empty catch
                    $null = 1
                }
            }
            foreach ($currentAssembly in $sourceAssemblies) {
                $assemblyName = $currentAssembly.Name
                $dbName = $currentAssembly.Parent.Name
                $destDb = $destServer.Databases[$dbName]
                Write-Message -Level VeryVerbose -Message "Processing $assemblyName on $dbname"
                $copyDbAssemblyStatus = [pscustomobject]@{
                    SourceServer        = $sourceServer.Name
                    SourceDatabase      = $dbName
                    DestinationServer   = $destServer.Name
                    DestinationDatabase = $destDb
                    type                = "Database Assembly"
                    Name                = $assemblyName
                    Status              = $null
                    Notes               = $null
                    DateTime            = [Sqlcollaborative.Dbatools.Utility.DbaDateTime](Get-Date)
                }


                if (!$destDb) {
                    $copyDbAssemblyStatus.Status = "Skipped"
                    $copyDbAssemblyStatus.Notes = "Destination database does not exist"
                    $copyDbAssemblyStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                    Write-Message -Level Verbose -Message "Destination database $dbName does not exist. Skipping $assemblyName.";
                    continue
                }

                if ((Test-Bound -ParameterName Assembly) -and $Assembly -notcontains "$dbName.$assemblyName" -or $ExcludeAssembly -contains "$dbName.$assemblyName") {
                    continue
                }

                if ($currentAssembly.AssemblySecurityLevel -eq "External" -and -not $destDb.Trustworthy) {
                    if ($Pscmdlet.ShouldProcess($destinstance, "Setting $dbName to External")) {
                        Write-Message -Level Verbose -Message "Setting $dbName Security Level to External on $destinstance."
                        $sql = "ALTER DATABASE $dbName SET TRUSTWORTHY ON"
                        try {
                            Write-Message -Level Debug -Message $sql
                            $destServer.Query($sql)
                        } catch {
                            $copyDbAssemblyStatus.Status = "Failed"
                            $copyDbAssemblyStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                            Stop-Function -Message "Issue setting security level." -Target $destDb -ErrorRecord $_
                        }
                    }
                }

                if ($destServer.Databases[$dbName].Assemblies.Name -contains $currentAssembly.name) {
                    if ($force -eq $false) {
                        $copyDbAssemblyStatus.Status = "Skipped"
                        $copyDbAssemblyStatus.Notes = "Already exists on destination"
                        $copyDbAssemblyStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                        Write-Message -Level Verbose -Message "Assembly $assemblyName exists at destination in the $dbName database. Use -Force to drop and migrate."
                        continue
                    } else {
                        if ($Pscmdlet.ShouldProcess($destinstance, "Dropping assembly $assemblyName and recreating")) {
                            try {
                                Write-Message -Level Verbose -Message "Dropping assembly $assemblyName."
                                Write-Message -Level Verbose -Message "This won't work if there are dependencies."
                                $destServer.Databases[$dbName].Assemblies[$assemblyName].Drop()
                                Write-Message -Level Verbose -Message "Copying assembly $assemblyName."
                                $sql = $currentAssembly.Script()
                                Write-Message -Level Debug -Message $sql
                                $destServer.Query($sql, $dbName)
                            } catch {
                                $copyDbAssemblyStatus.Status = "Failed"
                                $copyDbAssemblyStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                                Stop-Function -Message "Issue dropping assembly." -Target $assemblyName -ErrorRecord $_ -Continue
                            }
                        }
                    }
                }

                if ($Pscmdlet.ShouldProcess($destinstance, "Creating assembly $assemblyName")) {
                    try {
                        Write-Message -Level Verbose -Message "Copying assembly $assemblyName from database."
                        $sql = $currentAssembly.Script()
                        Write-Message -Level Debug -Message $sql
                        $destServer.Query($sql, $dbName)

                        $copyDbAssemblyStatus.Status = "Successful"
                        $copyDbAssemblyStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                    } catch {
                        $copyDbAssemblyStatus.Status = "Failed"
                        $copyDbAssemblyStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                        Stop-Function -Message "Issue creating assembly." -Target $assemblyName -ErrorRecord $_
                    }
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Copy-SqlDatabaseAssembly
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Copy-DbaDatabaseAssembly
    }
}

tools\dbatools\functions\Copy-DbaDbMail.ps1

function Copy-DbaDbMail {
    <#
    .SYNOPSIS
        Migrates Mail Profiles, Accounts, Mail Servers and Mail Server Configs from one SQL Server to another.

    .DESCRIPTION
        By default, all mail configurations for Profiles, Accounts, Mail Servers and Configs are copied.

    .PARAMETER Source
        Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.

    .PARAMETER SourceSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Destination
        Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.

    .PARAMETER DestinationSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Type
        Specifies the object type to migrate. Valid options are "Job", "Alert" and "Operator". When Type is specified, all categories from the selected type will be migrated.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER Force
        If this switch is enabled, existing objects on Destination with matching names from Source will be dropped.

    .NOTES
        Tags: Migration, Mail
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        Requires: sysadmin access on SQL Servers

    .LINK
        https://dbatools.io/Copy-DbaDbMail

    .EXAMPLE
        PS C:\> Copy-DbaDbMail -Source sqlserver2014a -Destination sqlcluster

        Copies all database mail objects from sqlserver2014a to sqlcluster using Windows credentials. If database mail objects with the same name exist on sqlcluster, they will be skipped.

    .EXAMPLE
        PS C:\> Copy-DbaDbMail -Source sqlserver2014a -Destination sqlcluster -SourceSqlCredential $cred

        Copies all database mail objects from sqlserver2014a to sqlcluster using SQL credentials for sqlserver2014a and Windows credentials for sqlcluster.

    .EXAMPLE
        PS C:\> Copy-DbaDbMail -Source sqlserver2014a -Destination sqlcluster -WhatIf

        Shows what would happen if the command were executed.

    .EXAMPLE
        PS C:\> Copy-DbaDbMail -Source sqlserver2014a -Destination sqlcluster -EnableException

        Performs execution of function, and will throw a terminating exception if something breaks

    #>
    [cmdletbinding(DefaultParameterSetName = "Default", SupportsShouldProcess)]
    param (
        [parameter(Mandatory)]
        [DbaInstanceParameter]$Source,
        [parameter(Mandatory)]
        [DbaInstanceParameter[]]$Destination,
        [Parameter(ParameterSetName = 'SpecificTypes')]
        [ValidateSet('ConfigurationValues', 'Profiles', 'Accounts', 'mailServers')]
        [string[]]$Type,
        [PSCredential]$SourceSqlCredential,
        [PSCredential]$DestinationSqlCredential,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {
        function Copy-DbaDbMailConfig {
            [cmdletbinding(SupportsShouldProcess)]
            param ()

            Write-Message -Message "Migrating mail server configuration values." -Level Verbose
            $copyMailConfigStatus = [pscustomobject]@{
                SourceServer      = $sourceServer.Name
                DestinationServer = $destServer.Name
                Name              = "Server Configuration"
                Type              = "Mail Configuration"
                Status            = $null
                Notes             = $null
                DateTime          = [Sqlcollaborative.Dbatools.Utility.DbaDateTime](Get-Date)
            }
            if ($pscmdlet.ShouldProcess($destinstance, "Migrating all mail server configuration values.")) {
                try {
                    $sql = $mail.ConfigurationValues.Script() | Out-String
                    $sql = $sql -replace [Regex]::Escape("'$source'"), "'$destinstance'"
                    Write-Message -Message $sql -Level Debug
                    $destServer.Query($sql) | Out-Null
                    $mail.ConfigurationValues.Refresh()
                    $copyMailConfigStatus.Status = "Successful"
                } catch {
                    $copyMailConfigStatus.Status = "Failed"
                    $copyMailConfigStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                    Stop-Function -Message "Unable to migrate mail configuration." -Category InvalidOperation -InnerErrorRecord $_ -Target $destServer
                }
                $copyMailConfigStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
            }
        }

        function Copy-DbaDatabaseAccount {
            [cmdletbinding(SupportsShouldProcess)]
            $sourceAccounts = $sourceServer.Mail.Accounts
            $destAccounts = $destServer.Mail.Accounts

            Write-Message -Message "Migrating accounts." -Level Verbose
            foreach ($account in $sourceAccounts) {
                $accountName = $account.name
                $copyMailAccountStatus = [pscustomobject]@{
                    SourceServer      = $sourceServer.Name
                    DestinationServer = $destServer.Name
                    Name              = $accountName
                    Type              = "Mail Account"
                    Status            = $null
                    Notes             = $null
                    DateTime          = [Sqlcollaborative.Dbatools.Utility.DbaDateTime](Get-Date)
                }

                if ($accounts.count -gt 0 -and $accounts -notcontains $accountName) {
                    continue
                }

                if ($destAccounts.name -contains $accountName) {
                    if ($force -eq $false) {
                        If ($pscmdlet.ShouldProcess($destinstance, "Account $accountName exists at destination. Use -Force to drop and migrate.")) {
                            $copyMailAccountStatus.Status = "Skipped"
                            $copyMailAccountStatus.Notes = "Already exists on destination"
                            $copyMailAccountStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                            Write-Message -Message "Account $accountName exists at destination. Use -Force to drop and migrate." -Level Verbose
                        }
                        continue
                    }

                    If ($pscmdlet.ShouldProcess($destinstance, "Dropping account $accountName and recreating.")) {
                        try {
                            Write-Message -Message "Dropping account $accountName." -Level Verbose
                            $destServer.Mail.Accounts[$accountName].Drop()
                            $destServer.Mail.Accounts.Refresh()
                        } catch {
                            $copyMailAccountStatus.Status = "Failed"
                            $copyMailAccountStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                            Stop-Function -Message "Issue dropping account." -Target $accountName -Category InvalidOperation -InnerErrorRecord $_ -Continue
                        }
                    }
                }

                if ($pscmdlet.ShouldProcess($destinstance, "Migrating account $accountName.")) {
                    try {
                        Write-Message -Message "Copying mail account $accountName." -Level Verbose
                        $sql = $account.Script() | Out-String
                        $sql = $sql -replace [Regex]::Escape("'$source'"), "'$destinstance'"
                        Write-Message -Message $sql -Level Debug
                        $destServer.Query($sql) | Out-Null
                        $copyMailAccountStatus.Status = "Successful"
                    } catch {
                        $copyMailAccountStatus.Status = "Failed"
                        $copyMailAccountStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                        Stop-Function -Message "Issue copying mail account." -Target $accountName -Category InvalidOperation -InnerErrorRecord $_
                    }
                    $copyMailAccountStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                }
            }
        }

        function Copy-DbaDbMailProfile {

            $sourceProfiles = $sourceServer.Mail.Profiles
            $destProfiles = $destServer.Mail.Profiles

            Write-Message -Message "Migrating mail profiles." -Level Verbose
            foreach ($profile in $sourceProfiles) {

                $profileName = $profile.name
                $copyMailProfileStatus = [pscustomobject]@{
                    SourceServer      = $sourceServer.Name
                    DestinationServer = $destServer.Name
                    Name              = $profileName
                    Type              = "Mail Profile"
                    Status            = $null
                    Notes             = $null
                    DateTime          = [Sqlcollaborative.Dbatools.Utility.DbaDateTime](Get-Date)
                }

                if ($profiles.count -gt 0 -and $profiles -notcontains $profileName) {
                    continue
                }

                if ($destProfiles.name -contains $profileName) {
                    if ($force -eq $false) {
                        If ($pscmdlet.ShouldProcess($destinstance, "Profile $profileName exists at destination. Use -Force to drop and migrate.")) {
                            $copyMailProfileStatus.Status = "Skipped"
                            $copyMailProfileStatus.Notes = "Already exists on destination"
                            $copyMailProfileStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                            Write-Message -Message "Profile $profileName exists at destination. Use -Force to drop and migrate." -Level Verbose
                        }
                        continue
                    }

                    If ($pscmdlet.ShouldProcess($destinstance, "Dropping profile $profileName and recreating.")) {
                        try {
                            Write-Message -Message "Dropping profile $profileName." -Level Verbose
                            $destServer.Mail.Profiles[$profileName].Drop()
                            $destServer.Mail.Profiles.Refresh()
                        } catch {
                            $copyMailProfileStatus.Status = "Failed"
                            $copyMailProfileStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                            Stop-Function -Message "Issue dropping profile." -Target $profileName -Category InvalidOperation -InnerErrorRecord $_ -Continue
                        }
                    }
                }

                if ($pscmdlet.ShouldProcess($destinstance, "Migrating mail profile $profileName.")) {
                    try {
                        Write-Message -Message "Copying mail profile $profileName." -Level Verbose
                        $sql = $profile.Script() | Out-String
                        $sql = $sql -replace [Regex]::Escape("'$source'"), "'$destinstance'"
                        Write-Message -Message $sql -Level Debug
                        $destServer.Query($sql) | Out-Null
                        $destServer.Mail.Profiles.Refresh()
                        $copyMailProfileStatus.Status = "Successful"
                    } catch {
                        $copyMailProfileStatus.Status = "Failed"
                        $copyMailProfileStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                        Stop-Function -Message "Issue copying mail profile." -Target $profileName -Category InvalidOperation -InnerErrorRecord $_
                    }
                    $copyMailProfileStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                }
            }
        }

        function Copy-DbaDbMailServer {
            [cmdletbinding(SupportsShouldProcess)]
            $sourceMailServers = $sourceServer.Mail.Accounts.MailServers
            $destMailServers = $destServer.Mail.Accounts.MailServers

            Write-Message -Message "Migrating mail servers." -Level Verbose
            foreach ($mailServer in $sourceMailServers) {
                $mailServerName = $mailServer.name
                $copyMailServerStatus = [pscustomobject]@{
                    SourceServer      = $sourceServer.Name
                    DestinationServer = $destServer.Name
                    Name              = $mailServerName
                    Type              = "Mail Server"
                    Status            = $null
                    Notes             = $null
                    DateTime          = [Sqlcollaborative.Dbatools.Utility.DbaDateTime](Get-Date)
                }
                if ($mailServers.count -gt 0 -and $mailServers -notcontains $mailServerName) {
                    continue
                }

                if ($destMailServers.name -contains $mailServerName) {
                    if ($force -eq $false) {
                        if ($pscmdlet.ShouldProcess($destinstance, "Mail server $mailServerName exists at destination. Use -Force to drop and migrate.")) {
                            $copyMailServerStatus.Status = "Skipped"
                            $copyMailServerStatus.Notes = "Already exists on destination"
                            $copyMailServerStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                            Write-Message -Message "Mail server $mailServerName exists at destination. Use -Force to drop and migrate." -Level Verbose
                        }
                        continue
                    }

                    If ($pscmdlet.ShouldProcess($destinstance, "Dropping mail server $mailServerName and recreating.")) {
                        try {
                            Write-Message -Message "Dropping mail server $mailServerName." -Level Verbose
                            $destServer.Mail.Accounts.MailServers[$mailServerName].Drop()
                        } catch {
                            $copyMailServerStatus.Status = "Failed"
                            $copyMailServerStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                            Stop-Function -Message "Issue dropping mail server." -Target $mailServerName -Category InvalidOperation -InnerErrorRecord $_ -Continue
                        }
                    }
                }

                if ($pscmdlet.ShouldProcess($destinstance, "Migrating account mail server $mailServerName.")) {
                    try {
                        Write-Message -Message "Copying mail server $mailServerName." -Level Verbose
                        $sql = $mailServer.Script() | Out-String
                        $sql = $sql -replace [Regex]::Escape("'$source'"), "'$destinstance'"
                        Write-Message -Message $sql -Level Debug
                        $destServer.Query($sql) | Out-Null
                        $copyMailServerStatus.Status = "Successful"
                    } catch {
                        $copyMailServerStatus.Status = "Failed"
                        $copyMailServerStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                        Stop-Function -Message "Issue copying mail server" -Target $mailServerName -Category InvalidOperation -InnerErrorRecord $_
                    }
                    $copyMailServerStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                }
            }
        }

        try {
            $sourceServer = Connect-SqlInstance -SqlInstance $Source -SqlCredential $SourceSqlCredential -MinimumVersion 9
        } catch {
            Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $Source
            return
        }
        $mail = $sourceServer.mail
    }
    process {
        if (Test-FunctionInterrupt) { return }
        foreach ($destinstance in $Destination) {
            try {
                $destServer = Connect-SqlInstance -SqlInstance $destinstance -SqlCredential $DestinationSqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $destinstance -Continue
            }

            if ($type.Count -gt 0) {

                switch ($type) {
                    "ConfigurationValues" {
                        Copy-DbaDbMailConfig
                        $destServer.Mail.ConfigurationValues.Refresh()
                    }

                    "Profiles" {
                        Copy-DbaDbMailProfile
                        $destServer.Mail.Profiles.Refresh()
                    }

                    "Accounts" {
                        Copy-DbaDatabaseAccount
                        $destServer.Mail.Accounts.Refresh()
                    }

                    "mailServers" {
                        Copy-DbaDbMailServer
                    }
                }

                continue
            }

            if (($profiles.count + $accounts.count + $mailServers.count) -gt 0) {

                if ($profiles.count -gt 0) {
                    Copy-DbaDbMailProfile -Profiles $profiles
                    $destServer.Mail.Profiles.Refresh()
                }

                if ($accounts.count -gt 0) {
                    Copy-DbaDatabaseAccount -Accounts $accounts
                    $destServer.Mail.Accounts.Refresh()
                }

                if ($mailServers.count -gt 0) {
                    Copy-DbaDbMailServer -mailServers $mailServers
                }

                continue
            }

            Copy-DbaDbMailConfig
            $destServer.Mail.ConfigurationValues.Refresh()
            Copy-DbaDatabaseAccount
            $destServer.Mail.Accounts.Refresh()
            Copy-DbaDbMailProfile
            $destServer.Mail.Profiles.Refresh()
            Copy-DbaDbMailServer
            $copyMailConfigStatus
            $copyMailAccountStatus
            $copyMailProfileStatus
            $copyMailServerStatus
            $enableDBMailStatus

            <# ToDo: Use Get/Set-DbaSpConfigure once the dynamic parameters are replaced. #>

            if (($sourceDbMailEnabled -eq 1) -and ($destDbMailEnabled -eq 0)) {
                if ($pscmdlet.ShouldProcess($destinstance, "Enabling Database Mail")) {
                    $sourceDbMailEnabled = ($sourceServer.Configuration.DatabaseMailEnabled).ConfigValue
                    Write-Message -Message "$sourceServer DBMail configuration value: $sourceDbMailEnabled." -Level Verbose

                    $destDbMailEnabled = ($destServer.Configuration.DatabaseMailEnabled).ConfigValue
                    Write-Message -Message "$destServer DBMail configuration value: $destDbMailEnabled." -Level Verbose
                    $enableDBMailStatus = [pscustomobject]@{
                        SourceServer      = $sourceServer.name
                        DestinationServer = $destServer.name
                        Name              = "Enabled on Destination"
                        Type              = "Mail Configuration"
                        Status            = if ($destDbMailEnabled -eq 1) { "Enabled" } else { $null }
                        DateTime          = [Sqlcollaborative.Dbatools.Utility.DbaDateTime](Get-Date)
                    }
                    try {
                        Write-Message -Message "Enabling Database Mail on $destServer." -Level Verbose
                        $destServer.Configuration.DatabaseMailEnabled.ConfigValue = 1
                        $destServer.Alter()
                        $enableDBMailStatus.Status = "Successful"
                    } catch {
                        $enableDBMailStatus.Status = "Failed"
                        $enableDBMailStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                        Stop-Function -Message "Cannot enable Database Mail." -Category InvalidOperation -ErrorRecord $_ -Target $destServer
                    }
                    $enableDBMailStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Copy-SqlDatabaseMail
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Copy-DbaDatabaseMail
    }
}

tools\dbatools\functions\Copy-DbaDbQueryStoreOption.ps1

function Copy-DbaDbQueryStoreOption {
    <#
    .SYNOPSIS
        Copies the configuration of a Query Store enabled database and sets the copied configuration on other databases.

    .DESCRIPTION
        Copies the configuration of a Query Store enabled database and sets the copied configuration on other databases.

    .PARAMETER Source
        Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2016 or higher.

    .PARAMETER SourceSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER SourceDatabase
        Specifies the database to copy the Query Store configuration from.

    .PARAMETER Destination
        Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2016 or higher.

    .PARAMETER DestinationSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER DestinationDatabase
        Specifies a list of databases that will receive a copy of the Query Store configuration of the SourceDatabase.

    .PARAMETER Exclude
        Specifies a list of databases which will NOT receive a copy of the Query Store configuration.

    .PARAMETER AllDatabases
        If this switch is enabled, the Query Store configuration will be copied to all databases on the destination instance.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: QueryStore
        Author: Enrico van de Laar (@evdlaar)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Copy-QueryStoreConfig

    .EXAMPLE
        PS C:\> Copy-DbaDbQueryStoreOption -Source ServerA\SQL -SourceDatabase AdventureWorks -Destination ServerB\SQL -AllDatabases

        Copy the Query Store configuration of the AdventureWorks database in the ServerA\SQL instance and apply it on all user databases in the ServerB\SQL Instance.

    .EXAMPLE
        PS C:\> Copy-DbaDbQueryStoreOption -Source ServerA\SQL -SourceDatabase AdventureWorks -Destination ServerB\SQL -DestinationDatabase WorldWideTraders

        Copy the Query Store configuration of the AdventureWorks database in the ServerA\SQL instance and apply it to the WorldWideTraders database in the ServerB\SQL Instance.

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [DbaInstanceParameter]$Source,
        [PSCredential]$SourceSqlCredential,
        [parameter(Mandatory, ValueFromPipeline)]
        [object]$SourceDatabase,
        [parameter(Mandatory, ValueFromPipeline)]
        [DbaInstanceParameter[]]$Destination,
        [PSCredential]$DestinationSqlCredential,
        [object[]]$DestinationDatabase,
        [object[]]$Exclude,
        [switch]$AllDatabases,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias Copy-DbaQueryStoreConfig
        try {
            $sourceServer = Connect-SqlInstance -SqlInstance $Source -SqlCredential $SourceSqlCredential
        } catch {
            Stop-Function -Message "Can't connect to $Source." -ErrorRecord $_ -Target $Source
            return
        }
    }

    process {
        if (Test-FunctionInterrupt) { return }
        foreach ($destinstance in $Destination) {
            # Grab the Query Store configuration from the SourceDatabase through the Get-DbaQueryStoreConfig function
            $SourceQSConfig = Get-DbaDbQueryStoreOption -SqlInstance $sourceServer -Database $SourceDatabase

            if (!$DestinationDatabase -and !$Exclude -and !$AllDatabases) {
                Stop-Function -Message "You must specify databases to execute against using either -DestinationDatabase, -Exclude or -AllDatabases." -Continue
            }

            foreach ($destinationServer in $destinstance) {

                try {
                    $destServer = Connect-SqlInstance -SqlInstance $destinstance -SqlCredential $DestinationSqlCredential
                } catch {
                    Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $destinstance -Continue
                }

                # We have to exclude all the system databases since they cannot have the Query Store feature enabled
                $dbs = Get-DbaDatabase -SqlInstance $destServer -ExcludeSystem

                if ($DestinationDatabase.count -gt 0) {
                    $dbs = $dbs | Where-Object { $DestinationDatabase -contains $_.Name }
                }

                if ($Exclude.count -gt 0) {
                    $dbs = $dbs | Where-Object { $exclude -notcontains $_.Name }
                }

                if ($dbs.count -eq 0) {
                    Stop-Function -Message "No matching databases found. Check the spelling and try again." -Continue
                }

                foreach ($db in $dbs) {
                    # skipping the database if the source and destination are the same instance
                    if (($sourceServer.Name -eq $destinationServer) -and ($SourceDatabase -eq $db.Name)) {
                        continue
                    }
                    Write-Message -Message "Processing destination database: $db on $destinationServer." -Level Verbose
                    $copyQueryStoreStatus = [pscustomobject]@{
                        SourceServer      = $sourceServer.name
                        SourceDatabase    = $SourceDatabase
                        DestinationServer = $destinationServer
                        Name              = $db.name
                        Type              = "QueryStore Configuration"
                        Status            = $null
                        DateTime          = [Sqlcollaborative.Dbatools.Utility.DbaDateTime](Get-Date)
                    }

                    if ($db.IsAccessible -eq $false) {
                        $copyQueryStoreStatus.Status = "Skipped"
                        Stop-Function -Message "The database $db on server $destinationServer is not accessible. Skipping database." -Continue
                    }

                    Write-Message -Message "Executing Set-DbaQueryStoreConfig." -Level Verbose
                    # Set the Query Store configuration through the Set-DbaQueryStoreConfig function
                    if ($PSCmdlet.ShouldProcess("$db", "Copying QueryStoreConfig")) {
                        try {

                            $setDbaDbQueryStoreOptionParameters = @{

                                SqlInstance         = $destinationServer;
                                SqlCredential       = $DestinationSqlCredential;
                                Database            = $db.name;
                                State               = $SourceQSConfig.ActualState;
                                FlushInterval       = $SourceQSConfig.DataFlushIntervalInSeconds;
                                CollectionInterval  = $SourceQSConfig.StatisticsCollectionIntervalInMinutes;
                                MaxSize             = $SourceQSConfig.MaxStorageSizeInMB;
                                CaptureMode         = $SourceQSConfig.QueryCaptureMode;
                                CleanupMode         = $SourceQSConfig.SizeBasedCleanupMode;
                                StaleQueryThreshold = $SourceQSConfig.StaleQueryThresholdInDays;
                            }

                            $null = Set-DbaDbQueryStoreOption @setDbaDbQueryStoreOptionParameters;
                            $copyQueryStoreStatus.Status = "Successful"
                        } catch {
                            $copyQueryStoreStatus.Status = "Failed"
                            Stop-Function -Message "Issue setting Query Store on $db." -Target $db -ErrorRecord $_ -Continue
                        }
                        $copyQueryStoreStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                    }
                }
            }
        }
    }
}

tools\dbatools\functions\Copy-DbaDbTableData.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Copy-DbaDbTableData {
    <#
    .SYNOPSIS
        Copies data between SQL Server tables.

    .DESCRIPTION
        Copies data between SQL Server tables using SQL Bulk Copy.
        The same can be achieved also doing
        $sourcetable = Invoke-DbaQuery -SqlInstance instance1 ... -As DataTable
        Write-DbaDataTable -SqlInstance ... -InputObject $sourcetable
        but it will force buffering the contents on the table in memory (high RAM usage for large tables).
        With this function, a streaming copy will be done in the most speedy and least resource-intensive way.

    .PARAMETER SqlInstance
        Source SQL Server.You must have sysadmin access and server version must be SQL Server version 2000 or greater.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Destination
        Destination Sql Server. You must have sysadmin access and server version must be SQL Server version 2000 or greater.

    .PARAMETER DestinationSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The database to copy the table from.

    .PARAMETER DestinationDatabase
        The database to copy the table to. If not specified, it is assumed to be the same of Database

    .PARAMETER Table
        Define a specific table you would like to use as source. You can specify a three-part name like db.sch.tbl.
        If the object has special characters please wrap them in square brackets [ ].
        This dbo.First.Table will try to find table named 'Table' on schema 'First' and database 'dbo'.
        The correct way to find table named 'First.Table' on schema 'dbo' is passing dbo.[First.Table]

    .PARAMETER DestinationTable
        The table you want to use as destination. If not specified, it is assumed to be the same of Table

    .PARAMETER Query
        If you want to copy only a portion of a table or selected tables, specify the query.
        Ensure to select all required columns. Calculated Columns or columns with default values may be excluded.
        The tablename should be a full three-part name in form [Database].[Schema].[Table]

    .PARAMETER AutoCreateTable
        Creates the destination table if it does not already exist, based off of the "Export..." script of the source table.

    .PARAMETER BatchSize
        The BatchSize for the import defaults to 5000.

    .PARAMETER NotifyAfter
        Sets the option to show the notification after so many rows of import

    .PARAMETER NoTableLock
        If this switch is enabled, a table lock (TABLOCK) will not be placed on the destination table. By default, this operation will lock the destination table while running.

    .PARAMETER CheckConstraints
        If this switch is enabled, the SqlBulkCopy option to process check constraints will be enabled.

        Per Microsoft "Check constraints while data is being inserted. By default, constraints are not checked."

    .PARAMETER FireTriggers
        If this switch is enabled, the SqlBulkCopy option to fire insert triggers will be enabled.

        Per Microsoft "When specified, cause the server to fire the insert triggers for the rows being inserted into the Database."

    .PARAMETER KeepIdentity
        If this switch is enabled, the SqlBulkCopy option to preserve source identity values will be enabled.

        Per Microsoft "Preserve source identity values. When not specified, identity values are assigned by the destination."

    .PARAMETER KeepNulls
        If this switch is enabled, the SqlBulkCopy option to preserve NULL values will be enabled.

        Per Microsoft "Preserve null values in the destination table regardless of the settings for default values. When not specified, null values are replaced by default values where applicable."

    .PARAMETER Truncate
        If this switch is enabled, the destination table will be truncated after prompting for confirmation.

    .PARAMETER BulkCopyTimeOut
        Value in seconds for the BulkCopy operations timeout. The default is 30 seconds.

    .PARAMETER InputObject
        Enables piping of Table objects from Get-DbaDbTable

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Migration
        Author: Simone Bizzotto (@niphlod)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Copy-DbaDbTableData

    .EXAMPLE
        PS C:\> Copy-DbaDbTableData -SqlInstance sql1 -Destination sql2 -Database dbatools_from -Table dbo.test_table

        Copies all the data from table dbo.test_table in database dbatools_from on sql1 to table test_table in database dbatools_from on sql2.

    .EXAMPLE
        PS C:\> Copy-DbaDbTableData -SqlInstance sql1 -Destination sql2 -Database dbatools_from -DestinationDatabase dbatools_dest -Table [Schema].[test table]

        Copies all the data from table [Schema].[test table] in database dbatools_from on sql1 to table [Schema].[test table] in database dbatools_dest on sql2

    .EXAMPLE
        PS C:\> Get-DbaDbTable -SqlInstance sql1 -Database tempdb -Table tb1, tb2 | Copy-DbaDbTableData -DestinationTable tb3

        Copies all data from tables tb1 and tb2 in tempdb on sql1 to tb3 in tempdb on sql1

    .EXAMPLE
        PS C:\> Get-DbaDbTable -SqlInstance sql1 -Database tempdb -Table tb1, tb2 | Copy-DbaDbTableData -Destination sql2

        Copies data from tbl1 in tempdb on sql1 to tbl1 in tempdb on sql2
        then
        Copies data from tbl2 in tempdb on sql1 to tbl2 in tempdb on sql2

    .EXAMPLE
        PS C:\> Copy-DbaDbTableData -SqlInstance sql1 -Destination sql2 -Database dbatools_from -Table test_table -KeepIdentity -Truncate

        Copies all the data in table test_table from sql1 to sql2, using the database dbatools_from, keeping identity columns and truncating the destination

    .EXAMPLE
        PS C:\> $params = @{
        >> SourceSqlInstance = 'sql1'
        >> DestinationSqlInstance = 'sql2'
        >> Database = 'dbatools_from'
        >> DestinationDatabase = 'dbatools_dest'
        >> Table = '[Schema].[Table]'
        >> DestinationTable = '[dbo].[Table.Copy]'
        >> KeepIdentity = $true
        >> KeepNulls = $true
        >> Truncate = $true
        >> BatchSize = 10000
        >> }
        >>
        PS C:\> Copy-DbaDbTableData @params

        Copies all the data from table [Schema].[Table] in database dbatools_from on sql1 to table [dbo].[Table.Copy] in database dbatools_dest on sql2
        Keeps identity columns and Nulls, truncates the destination and processes in BatchSize of 10000.

       #>
    [CmdletBinding(DefaultParameterSetName = "Default", SupportsShouldProcess)]
    param (
        [Alias("ServerInstance", "SqlServer", "Source")]
        [DbaInstanceParameter]$SqlInstance,
        [PSCredential]$SqlCredential,
        [DbaInstanceParameter[]]$Destination,
        [PSCredential]$DestinationSqlCredential,
        [string]$Database,
        [string]$DestinationDatabase,
        [string[]]$Table,
        [string]$Query,
        [switch]$AutoCreateTable,
        [int]$BatchSize = 50000,
        [int]$NotifyAfter = 5000,
        [string]$DestinationTable,
        [switch]$NoTableLock,
        [switch]$CheckConstraints,
        [switch]$FireTriggers,
        [switch]$KeepIdentity,
        [switch]$KeepNulls,
        [switch]$Truncate,
        [int]$bulkCopyTimeOut = 5000,
        [Parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Table[]]$InputObject,
        [switch]$EnableException
    )

    begin {
        # Getting the total rows copied is a challenge. Use SqlBulkCopyExtension.
        # http://stackoverflow.com/questions/1188384/sqlbulkcopy-row-count-when-complete

        $sourcecode = 'namespace System.Data.SqlClient {
            using Reflection;

            public static class SqlBulkCopyExtension
            {
                const String _rowsCopiedFieldName = "_rowsCopied";
                static FieldInfo _rowsCopiedField = null;

                public static int RowsCopiedCount(this SqlBulkCopy bulkCopy)
                {
                    if (_rowsCopiedField == null) _rowsCopiedField = typeof(SqlBulkCopy).GetField(_rowsCopiedFieldName, BindingFlags.NonPublic | BindingFlags.GetField | BindingFlags.Instance);
                    return (int)_rowsCopiedField.GetValue(bulkCopy);
                }
            }
        }'
        
        Add-Type -ReferencedAssemblies System.Data.dll -TypeDefinition $sourcecode -ErrorAction Stop
        if (-not $script:core) {
            try {
                Add-Type -ReferencedAssemblies System.Data.dll -TypeDefinition $sourcecode -ErrorAction Stop
            } catch {
                $null = 1
            }
        }
        
        $bulkCopyOptions = 0
        $options = "TableLock", "CheckConstraints", "FireTriggers", "KeepIdentity", "KeepNulls", "Default"

        foreach ($option in $options) {
            $optionValue = Get-Variable $option -ValueOnly -ErrorAction SilentlyContinue
            if ($option -eq "TableLock" -and (!$NoTableLock)) {
                $optionValue = $true
            }
            if ($optionValue -eq $true) {
                $bulkCopyOptions += $([Data.SqlClient.SqlBulkCopyOptions]::$option).value__
            }
        }
    }

    process {
        if ((Test-Bound -Not -ParameterName Table, SqlInstance) -and (Test-Bound -Not -ParameterName InputObject)) {
            Stop-Function -Message "You must pipe in a table or specify SqlInstance, Database and Table."
            return
        }

        if ($SqlInstance) {
            if ((Test-Bound -Not -ParameterName Database)) {
                Stop-Function -Message "Database is required when passing a SqlInstance" -Target $Table
                return
            }

            if ((Test-Bound -Not -ParameterName Destination, DestinationDatabase, DestinationTable)) {
                Stop-Function -Message "Cannot copy $Table into itself. One of destination Server, Database or Table must be specified " -Target $Table
                return
            }

            try {
                $server = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $SqlInstance
                return
            }

            if ($Database -notin $server.Databases.Name) {
                Stop-Function -Message "Database $Database doesn't exist on $server"
                return
            }

            try {
                foreach ($tbl in $Table) {
                    $dbTable = Get-DbaDbTable -SqlInstance $server -Table $tbl -Database $Database -EnableException -Verbose:$false
                    if ($dbTable.Count -eq 1) {
                        $InputObject += $dbTable
                    } else {
                        Stop-Function -Message "The table $tbl matches $($dbTable.Count) objects. Unable to determine which object to copy" -Continue
                    }
                }
            } catch {
                Stop-Function -Message "Unable to determine source table : $Table"
                return
            }
        }

        foreach ($sqltable in $InputObject) {
            $Database = $sqltable.Parent.Name
            $server = $sqltable.Parent.Parent

            if ((Test-Bound -Not -ParameterName DestinationTable)) {
                $DestinationTable = '[' + $sqltable.Schema + '].[' + $sqltable.Name + ']'
            }

            $newTableParts = Get-TableNameParts $DestinationTable
            #using FQTN to determine database name
            if ($newTableParts.Database) {
                $DestinationDatabase = $newTableParts.Database
            } elseif ((Test-Bound -Not -ParameterName DestinationDatabase)) {
                $DestinationDatabase = $Database
            }

            if (-not $Destination) {
                $Destination = $server
            }

            foreach ($destinationserver in $Destination) {
                try {
                    $destServer = Connect-SqlInstance -SqlInstance $destinationserver -SqlCredential $DestinationSqlCredential
                } catch {
                    Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $destinationserver
                    return
                }

                if ($DestinationDatabase -notin $destServer.Databases.Name) {
                    Stop-Function -Message "Database $DestinationDatabase doesn't exist on $destServer"
                    return
                }

                $desttable = Get-DbaDbTable -SqlInstance $destServer -Table $DestinationTable -Database $DestinationDatabase -Verbose:$false | Select-Object -First 1
                if (-not $desttable -and $AutoCreateTable) {
                    try {
                        $tablescript = $sqltable | Export-DbaScript -Passthru | Out-String
                        #replacing table name
                        if ($newTableParts.Table) {
                            $rX = "(CREATE TABLE \[$([regex]::Escape($sqltable.Schema))\]\.\[)$([regex]::Escape($sqltable.Name))(\]\()"
                            $tablescript = $tablescript -replace $rX, "`$1$($newTableParts.Table)`$2"
                        }
                        #replacing table schema
                        if ($newTableParts.Schema) {
                            $rX = "(CREATE TABLE \[)$([regex]::Escape($sqltable.Schema))(\]\.\[$([regex]::Escape($newTableParts.Schema))\]\()"
                            $tablescript = $tablescript -replace $rX, "`$1$($newTableParts.Schema)`$2"
                        }

                        if ($PSCmdlet.ShouldProcess($destServer, "Creating new table: $DestinationTable")) {
                            Write-Message -Message "New table script: $tablescript" -Level VeryVerbose
                            Invoke-DbaQuery -SqlInstance $destServer -Database $DestinationDatabase -Query "$tablescript" -EnableException # add some string assurance there
                            #table list was updated, let's grab a fresh one
                            $destServer.Databases[$DestinationDatabase].Tables.Refresh()
                            $desttable = Get-DbaDbTable -SqlInstance $destServer -Table $DestinationTable -Database $DestinationDatabase -Verbose:$false
                            Write-Message -Message "New table created: $desttable" -Level Verbose
                        }
                    } catch {
                        Stop-Function -Message "Unable to determine destination table: $DestinationTable" -ErrorRecord $_
                        return
                    }
                }
                if (-not $desttable) {
                    Stop-Function -Message "Table $DestinationTable cannot be found in $DestinationDatabase. Use -AutoCreateTable to automatically create the table on the destination." -Continue
                }

                $connstring = $destServer.ConnectionContext.ConnectionString

                if ($server.DatabaseEngineType -eq "SqlAzureDatabase") {
                    $fqtnfrom = "$sqltable"
                } else {
                    $fqtnfrom = "$($server.Databases[$Database]).$sqltable"
                }

                if ($destServer.DatabaseEngineType -eq "SqlAzureDatabase") {
                    $fqtndest = "$desttable"
                } else {
                    $fqtndest = "$($destServer.Databases[$DestinationDatabase]).$desttable"
                }

                if ($fqtndest -eq $fqtnfrom -and $server.Name -eq $destServer.Name) {
                    Stop-Function -Message "Cannot copy $fqtnfrom on $($server.Name) into $fqtndest on ($destServer.Name). Source and Destination must be different " -Target $Table
                    return
                }


                if (Test-Bound -ParameterName Query -Not) {
                    $Query = "SELECT * FROM $fqtnfrom"
                }
                try {
                    if ($Truncate -eq $true) {
                        if ($Pscmdlet.ShouldProcess($destServer, "Truncating table $fqtndest")) {
                            $null = $destServer.Databases[$DestinationDatabase].ExecuteNonQuery("TRUNCATE TABLE $fqtndest")
                        }
                    }
                    if ($Pscmdlet.ShouldProcess($server, "Copy data from $fqtnfrom")) {
                        $cmd = $server.ConnectionContext.SqlConnectionObject.CreateCommand()
                        $cmd.CommandText = $Query
                        if ($server.ConnectionContext.IsOpen -eq $false) {
                            $server.ConnectionContext.SqlConnectionObject.Open()
                        }
                        $bulkCopy = New-Object Data.SqlClient.SqlBulkCopy("$connstring;Database=$DestinationDatabase", $bulkCopyOptions)
                        $bulkCopy.DestinationTableName = $fqtndest
                        $bulkCopy.EnableStreaming = $true
                        $bulkCopy.BatchSize = $BatchSize
                        $bulkCopy.NotifyAfter = $NotifyAfter
                        $bulkCopy.BulkCopyTimeOut = $BulkCopyTimeOut

                        $elapsed = [System.Diagnostics.Stopwatch]::StartNew()
                        # Add RowCount output
                        $bulkCopy.Add_SqlRowsCopied( {
                                $RowsPerSec = [math]::Round($args[1].RowsCopied / $elapsed.ElapsedMilliseconds * 1000.0, 1)
                                Write-Progress -id 1 -activity "Inserting rows" -Status ([System.String]::Format("{0} rows ({1} rows/sec)", $args[1].RowsCopied, $RowsPerSec))
                            })
                    }

                    if ($Pscmdlet.ShouldProcess($destServer, "Writing rows to $fqtndest")) {
                        $reader = $cmd.ExecuteReader()
                        $bulkCopy.WriteToServer($reader)
                        if ($script:core) {
                            $RowsTotal = "Unsupported in Core"
                        } else {
                            $RowsTotal = [System.Data.SqlClient.SqlBulkCopyExtension]::RowsCopiedCount($bulkCopy)
                        }
                        $TotalTime = [math]::Round($elapsed.Elapsed.TotalSeconds, 1)
                        Write-Message -Level Verbose -Message "$RowsTotal rows inserted in $TotalTime sec"
                        if ($rowCount -is [int]) {
                            Write-Progress -id 1 -activity "Inserting rows" -status "Complete" -Completed
                        }

                        $bulkCopy.Close()
                        $bulkCopy.Dispose()
                        $reader.Close()

                        [pscustomobject]@{
                            SourceInstance      = $server.Name
                            SourceDatabase      = $Database
                            SourceTable         = $sqltable.Name
                            DestinationInstance = $destServer.name
                            DestinationDatabase = $DestinationDatabase
                            DestinationTable    = $desttable.Name
                            RowsCopied          = $rowstotal
                            Elapsed             = [prettytimespan]$elapsed.Elapsed
                        }
                    }
                } catch {
                    Stop-Function -Message "Something went wrong" -ErrorRecord $_ -Target $server -continue
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Copy-DbaTableData
    }
}

tools\dbatools\functions\Copy-DbaEndpoint.ps1

function Copy-DbaEndpoint {
    <#
    .SYNOPSIS
        Copy-DbaEndpoint migrates server endpoints from one SQL Server to another.

    .DESCRIPTION
        By default, all endpoints are copied.

        If the endpoint already exists on the destination, it will be skipped unless -Force is used.

    .PARAMETER Source
        Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.

    .PARAMETER SourceSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Destination
        Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.

    .PARAMETER DestinationSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Endpoint
        The endpoint(s) to process. This list is auto-populated from the server. If unspecified, all endpoints will be processed.

    .PARAMETER ExcludeEndpoint
        The endpoint(s) to exclude. This list is auto-populated from the server.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER Force
        If this switch is enabled, existing endpoints on Destination with matching names from Source will be dropped.

    .NOTES
        Tags: Migration, Endpoint
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        Requires: sysadmin access on SQL Servers

    .LINK
        https://dbatools.io/Copy-DbaEndpoint

    .EXAMPLE
        PS C:\> Copy-DbaEndpoint -Source sqlserver2014a -Destination sqlcluster

        Copies all server endpoints from sqlserver2014a to sqlcluster, using Windows credentials. If endpoints with the same name exist on sqlcluster, they will be skipped.

    .EXAMPLE
        PS C:\> Copy-DbaEndpoint -Source sqlserver2014a -SourceSqlCredential $cred -Destination sqlcluster -Endpoint tg_noDbDrop -Force

        Copies only the tg_noDbDrop endpoint from sqlserver2014a to sqlcluster using SQL credentials for sqlserver2014a and Windows credentials for sqlcluster. If an endpoint with the same name exists on sqlcluster, it will be dropped and recreated because -Force was used.

    .EXAMPLE
        PS C:\> Copy-DbaEndpoint -Source sqlserver2014a -Destination sqlcluster -WhatIf -Force

        Shows what would happen if the command were executed using force.

    #>
    [CmdletBinding(DefaultParameterSetName = "Default", SupportsShouldProcess)]
    param (
        [parameter(Mandatory)]
        [DbaInstanceParameter]$Source,
        [PSCredential]
        $SourceSqlCredential,
        [parameter(Mandatory)]
        [DbaInstanceParameter[]]$Destination,
        [PSCredential]
        $DestinationSqlCredential,
        [object[]]$Endpoint,
        [object[]]$ExcludeEndpoint,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        try {
            $sourceServer = Connect-SqlInstance -SqlInstance $Source -SqlCredential $SourceSqlCredential -MinimumVersion 9
        } catch {
            Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $Source
            return
        }
        $serverEndpoints = $sourceServer.Endpoints | Where-Object IsSystemObject -eq $false
    }
    process {
        if (Test-FunctionInterrupt) { return }
        foreach ($destinstance in $Destination) {
            try {
                $destServer = Connect-SqlInstance -SqlInstance $destinstance -SqlCredential $DestinationSqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $destinstance -Continue
            }
            $destEndpoints = $destServer.Endpoints

            foreach ($currentEndpoint in $serverEndpoints) {
                $endpointName = $currentEndpoint.Name

                $copyEndpointStatus = [pscustomobject]@{
                    SourceServer      = $sourceServer.Name
                    DestinationServer = $destServer.Name
                    Name              = $endpointName
                    Type              = "Endpoint"
                    Status            = $null
                    Notes             = $null
                    DateTime          = [DbaDateTime](Get-Date)
                }

                if ($Endpoint -and $Endpoint -notcontains $endpointName -or $ExcludeEndpoint -contains $endpointName) {
                    continue
                }

                if ($destEndpoints.Name -contains $endpointName) {
                    if ($force -eq $false) {
                        $copyEndpointStatus.Status = "Skipped"
                        $copyEndpointStatus.Notes = "Already exists on destination"
                        $copyEndpointStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                        Write-Message -Level Verbose -Message "Server endpoint $endpointName exists at destination. Use -Force to drop and migrate."
                        continue
                    } else {
                        if ($Pscmdlet.ShouldProcess($destinstance, "Dropping server endpoint $endpointName and recreating.")) {
                            try {
                                Write-Message -Level Verbose -Message "Dropping server endpoint $endpointName."
                                $destServer.Endpoints[$endpointName].Drop()
                            } catch {
                                $copyEndpointStatus.Status = "Failed"
                                $copyEndpointStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                                Stop-Function -Message "Issue dropping server endpoint." -Target $endpointName -ErrorRecord $_ -Continue
                            }
                        }
                    }
                }

                if ($Pscmdlet.ShouldProcess($destinstance, "Creating server endpoint $endpointName.")) {
                    try {
                        Write-Message -Level Verbose -Message "Copying server endpoint $endpointName."
                        $destServer.Query($currentEndpoint.Script()) | Out-Null

                        $copyEndpointStatus.Status = "Successful"
                        $copyEndpointStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                    } catch {
                        $copyEndpointStatus.Status = "Failed"
                        $copyEndpointStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                        Stop-Function -Message "Issue creating server endpoint." -Target $endpointName -ErrorRecord $_
                    }
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Copy-SqlEndpoint
    }
}

tools\dbatools\functions\Copy-DbaLinkedServer.ps1

function Copy-DbaLinkedServer {
    <#
    .SYNOPSIS
        Copy-DbaLinkedServer migrates Linked Servers from one SQL Server to another. Linked Server logins and passwords are migrated as well.

    .DESCRIPTION
        By using password decryption techniques provided by Antti Rantasaari (NetSPI, 2014), this script migrates SQL Server Linked Servers from one server to another, while maintaining username and password.

        Credit: https://blog.netspi.com/decrypting-mssql-database-link-server-passwords/

    .PARAMETER Source
        Source SQL Server (2005 and above). You must have sysadmin access to both SQL Server and Windows.

    .PARAMETER SourceSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Destination
        Destination SQL Server (2005 and above). You must have sysadmin access to both SQL Server and Windows.

    .PARAMETER DestinationSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER LinkedServer
        The linked server(s) to process - this list is auto-populated from the server. If unspecified, all linked servers will be processed.

    .PARAMETER ExcludeLinkedServer
        The linked server(s) to exclude - this list is auto-populated from the server

    .PARAMETER UpgradeSqlClient
        Upgrade any SqlClient Linked Server to the current Version

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER Force
        By default, if a Linked Server exists on the source and destination, the Linked Server is not copied over. Specifying -force will drop and recreate the Linked Server on the Destination server.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: WSMan, Migration, LinkedServer
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        Requires: sysadmin access on SQL Servers
        Limitations: This just copies the SQL portion. It does not copy files (i.e. a local SQLite database, or Microsoft Access DB), nor does it configure ODBC entries.

    .LINK
        https://dbatools.io/Copy-DbaLinkedServer

    .EXAMPLE
        PS C:\> Copy-DbaLinkedServer -Source sqlserver2014a -Destination sqlcluster

        Copies all SQL Server Linked Servers on sqlserver2014a to sqlcluster. If Linked Server exists on destination, it will be skipped.

    .EXAMPLE
        PS C:\> Copy-DbaLinkedServer -Source sqlserver2014a -Destination sqlcluster -LinkedServer SQL2K5,SQL2k -Force

        Copies over two SQL Server Linked Servers (SQL2K and SQL2K2) from sqlserver to sqlcluster. If the credential already exists on the destination, it will be dropped.

    #>
    [CmdletBinding(DefaultParameterSetName = "Default", SupportsShouldProcess)]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseSingularNouns", "", Justification = "Internal functions are ignored")]
    param (
        [parameter(Mandatory)]
        [DbaInstanceParameter]$Source,
        [PSCredential]$SourceSqlCredential,
        [parameter(Mandatory)]
        [DbaInstanceParameter[]]$Destination,
        [PSCredential]$DestinationSqlCredential,
        [object[]]$LinkedServer,
        [object[]]$ExcludeLinkedServer,
        [switch]$UpgradeSqlClient,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {
        if (-not $script:isWindows) {
            Stop-Function -Message "Copy-DbaCredential is only supported on Windows"
            return
        }
        $null = Test-ElevationRequirement -ComputerName $Source.ComputerName
        function Copy-DbaLinkedServers {
            param (
                [string[]]$LinkedServer,
                [bool]$force
            )

            Write-Message -Level Verbose -Message "Collecting Linked Server logins and passwords on $($sourceServer.Name)."
            $sourcelogins = Get-DecryptedObject -SqlInstance $sourceServer -Type LinkedServer

            $serverlist = $sourceServer.LinkedServers

            if ($LinkedServer) {
                $serverlist = $serverlist | Where-Object Name -In $LinkedServer
            }
            if ($ExcludeLinkedServer) {
                $serverList = $serverlist | Where-Object Name -NotIn $ExcludeLinkedServer
            }

            foreach ($currentLinkedServer in $serverlist) {
                $provider = $currentLinkedServer.ProviderName
                try {
                    $destServer.LinkedServers.Refresh()
                    $destServer.LinkedServers.LinkedServerLogins.Refresh()
                } catch {
                    #here to avoid an empty catch
                    $null = 1
                }

                $linkedServerName = $currentLinkedServer.Name
                $linkedServerDataSource = $currentLinkedServer.DataSource

                $copyLinkedServer = [pscustomobject]@{
                    SourceServer      = $sourceServer.Name
                    DestinationServer = $destServer.Name
                    Name              = $linkedServerName
                    DataSource        = $linkedServerDataSource
                    Type              = "Linked Server"
                    Status            = $null
                    Notes             = $provider
                    DateTime          = [DbaDateTime](Get-Date)
                }

                # This does a check to warn of missing OleDbProviderSettings but should only be checked on SQL on Windows
                if ($destServer.Settings.OleDbProviderSettings.Name.Length -ne 0) {
                    if (!$destServer.Settings.OleDbProviderSettings.Name -contains $provider -and !$provider.StartsWith("SQLN")) {
                        $copyLinkedServer.Status = "Skipped"
                        $copyLinkedServer.Notes = "Missing provider"
                        $copyLinkedServer | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                        Write-Message -Level Verbose -Message "$($destServer.Name) does not support the $provider provider. Skipping $linkedServerName."
                        continue
                    }
                }

                if ($null -ne $destServer.LinkedServers[$linkedServerName]) {
                    if (!$force) {
                        if ($Pscmdlet.ShouldProcess($destinstance, "$linkedServerName exists $($destServer.Name). Skipping.")) {
                            $copyLinkedServer.Status = "Skipped"
                            $copyLinkedServer.Notes = "Already exists on destination"
                            $copyLinkedServer | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                            Write-Message -Level Verbose -Message "$linkedServerName exists $($destServer.Name). Skipping."
                        }
                        continue
                    } else {
                        if ($Pscmdlet.ShouldProcess($destinstance, "Dropping $linkedServerName")) {
                            if ($currentLinkedServer.Name -eq 'repl_distributor') {
                                Write-Message -Level Verbose -Message "repl_distributor cannot be dropped. Not going to try."
                                continue
                            }

                            $destServer.LinkedServers[$linkedServerName].Drop($true)
                            $destServer.LinkedServers.refresh()
                        }
                    }
                }

                Write-Message -Level Verbose -Message "Attempting to migrate: $linkedServerName."
                If ($Pscmdlet.ShouldProcess($destinstance, "Migrating $linkedServerName")) {
                    try {
                        $sql = $currentLinkedServer.Script() | Out-String
                        Write-Message -Level Debug -Message $sql

                        if ($UpgradeSqlClient -and $sql -match "sqlncli") {
                            $destProviders = $destServer.Settings.OleDbProviderSettings | Where-Object { $_.Name -like 'SQLNCLI*' }
                            $newProvider = $destProviders | Sort-Object Name -Descending | Select-Object -First 1 -ExpandProperty Name

                            Write-Message -Level Verbose -Message "Changing sqlncli to $newProvider"
                            $sql = $sql -replace ("sqlncli[0-9]+", $newProvider)
                        }

                        $destServer.Query($sql)

                        if ($copyLinkedServer.Name -ne $copyLinkedServer.DataSource) {
                            $sql2 = "EXEC sp_setnetname '$($copyLinkedServer.Name)', '$($copyLinkedServer.DataSource)'; "
                            $destServer.Query($sql2)
                        }

                        $destServer.LinkedServers.Refresh()
                        Write-Message -Level Verbose -Message "$linkedServerName successfully copied."

                        $copyLinkedServer.Status = "Successful"
                        $copyLinkedServer | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                    } catch {
                        $copyLinkedServer.Status = "Failed"
                        $copyLinkedServer | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                        Stop-Function -Message "Issue adding linked server $destServer." -Target $linkedServerName -InnerErrorRecord $_
                        $skiplogins = $true
                    }
                }

                if ($skiplogins -ne $true) {
                    $destlogins = $destServer.LinkedServers[$linkedServerName].LinkedServerLogins
                    $lslogins = $sourcelogins | Where-Object { $_.Name -eq $linkedServerName }

                    foreach ($login in $lslogins) {
                        if ($Pscmdlet.ShouldProcess($destinstance, "Migrating $($login.Login)")) {
                            $currentlogin = $destlogins | Where-Object { $_.RemoteUser -eq $login.Identity }

                            $copyLinkedServer.Type = $login.Identity

                            if ($currentlogin.RemoteUser.length -ne 0) {
                                try {
                                    $currentlogin.SetRemotePassword($login.Password)
                                    $currentlogin.Alter()

                                    $copyLinkedServer.Status = "Successful"
                                    $copyLinkedServer | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                                } catch {
                                    $copyLinkedServer.Status = "Failed"
                                    $copyLinkedServer | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                                    Stop-Function -Message "Failed to copy login." -Target $login -InnerErrorRecord $_
                                }
                            }
                        }
                    }
                }
            }
        }

        if ($null -ne $SourceSqlCredential.Username) {
            Write-Message -Level Verbose -Message "You are using a SQL Credential. Note that this script requires Windows Administrator access on the source server. Attempting with $($SourceSqlCredential.Username)."
        }
        try {
            $sourceServer = Connect-SqlInstance -SqlInstance $Source -SqlCredential $SourceSqlCredential
            return
        } catch {
            Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $Source
            return
        }
        if (!(Test-SqlSa -SqlInstance $sourceServer -SqlCredential $SourceSqlCredential)) {
            Stop-Function -Message "Not a sysadmin on $source. Quitting." -Target $sourceServer
            return
        }
        Write-Message -Level Verbose -Message "Getting NetBios name for $source."
        $sourceNetBios = Resolve-NetBiosName $sourceserver

        Write-Message -Level Verbose -Message "Checking if Remote Registry is enabled on $source."
        try {
            Invoke-Command2 -Raw -Credential $Credential -ComputerName $sourceNetBios -ScriptBlock { Get-ItemProperty -Path "HKLM:\SOFTWARE\" } -ErrorAction Stop
        } catch {
            Stop-Function -Message "Can't connect to registry on $source." -Target $sourceNetBios -ErrorRecord $_
            return
        }
    }
    process {
        if (Test-FunctionInterrupt) { return }

        foreach ($destinstance in $Destination) {
            try {
                $destServer = Connect-SqlInstance -SqlInstance $destinstance -SqlCredential $DestinationSqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $destinstance -Continue
            }
            if (!(Test-SqlSa -SqlInstance $destServer -SqlCredential $DestinationSqlCredential)) {
                Stop-Function -Message "Not a sysadmin on $destinstance" -Target $destServer -Continue
            }

            # Magic happens here
            Copy-DbaLinkedServers $LinkedServer -Force:$force
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Copy-SqlLinkedServer
    }
}

tools\dbatools\functions\Copy-DbaLogin.ps1

function Copy-DbaLogin {
    <#
    .SYNOPSIS
        Migrates logins from source to destination SQL Servers. Supports SQL Server versions 2000 and newer.

    .DESCRIPTION
        SQL Server 2000: Migrates logins with SIDs, passwords, server roles and database roles.

        SQL Server 2005 & newer: Migrates logins with SIDs, passwords, defaultdb, server roles & securables, database permissions & securables, login attributes (enforce password policy, expiration, etc.)

        The login hash algorithm changed in SQL Server 2012, and is not backwards compatible with previous SQL Server versions. This means that while SQL Server 2000 logins can be migrated to SQL Server 2012, logins created in SQL Server 2012 can only be migrated to SQL Server 2012 and above.

    .PARAMETER Source
        Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.

    .PARAMETER SourceSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Destination
        Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.

    .PARAMETER DestinationSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Login
        The login(s) to process. Options for this list are auto-populated from the server. If unspecified, all logins will be processed.

    .PARAMETER ExcludeLogin
        The login(s) to exclude. Options for this list are auto-populated from the server.

    .PARAMETER ExcludeSystemLogins
        If this switch is enabled, NT SERVICE accounts will be skipped.

    .PARAMETER ExcludePermissionSync
        Skips permission syncs

    .PARAMETER SyncOnly
        If this switch is enabled, only SQL Server login permissions, roles, etc. will be synced. Logins and users will not be added or dropped.  If a matching Login does not exist on the destination, the Login will be skipped.
        Credential removal is not currently supported for this parameter.

    .PARAMETER SyncSaName
        If this switch is enabled, the name of the sa account will be synced between Source and Destination

    .PARAMETER OutFile
        Calls Export-DbaLogin and exports all logins to a T-SQL formatted file. This does not perform a copy, so no destination is required.

    .PARAMETER InputObject
        Takes the parameters required from a Login object that has been piped into the command

    .PARAMETER LoginRenameHashtable
        Pass a hash table into this parameter to be passed into Rename-DbaLogin to update the Login and mappings after the Login is completed.

    .PARAMETER KillActiveConnection
        If this switch and -Force are enabled, all active connections and sessions on Destination will be killed.

        A login cannot be dropped when it has active connections on the instance.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER Force
        If this switch is enabled, the Login(s) will be dropped and recreated on Destination. Logins that own Agent jobs cannot be dropped at this time.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Migration, Login
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        Requires: sysadmin access on SQL Servers

    .LINK
        https://dbatools.io/Copy-DbaLogin

    .EXAMPLE
        PS C:\> Copy-DbaLogin -Source sqlserver2014a -Destination sqlcluster -Force

        Copies all logins from Source Destination. If a SQL Login on Source exists on the Destination, the Login on Destination will be dropped and recreated.

        If active connections are found for a login, the copy of that Login will fail as it cannot be dropped.

    .EXAMPLE
        PS C:\> Copy-DbaLogin -Source sqlserver2014a -Destination sqlcluster -Force -KillActiveConnection

        Copies all logins from Source Destination. If a SQL Login on Source exists on the Destination, the Login on Destination will be dropped and recreated.

        If any active connections are found they will be killed.

    .EXAMPLE
        PS C:\> Copy-DbaLogin -Source sqlserver2014a -Destination sqlcluster -ExcludeLogin realcajun -SourceSqlCredential $scred -DestinationSqlCredential $dcred

        Copies all Logins from Source to Destination except for realcajun using SQL Authentication to connect to both instances.

        If a Login already exists on the destination, it will not be migrated.

    .EXAMPLE
        PS C:\> Copy-DbaLogin -Source sqlserver2014a -Destination sqlcluster -Login realcajun, netnerds -force

        Copies ONLY Logins netnerds and realcajun. If Login realcajun or netnerds exists on Destination, the existing Login(s) will be dropped and recreated.

    .EXAMPLE
        PS C:\> Copy-DbaLogin -Source sqlserver2014a -Destination sqlcluster -SyncOnly

        Syncs only SQL Server login permissions, roles, etc. Does not add or drop logins or users.

        If a matching Login does not exist on Destination, the Login will be skipped.

    .EXAMPLE
        PS C:\> Copy-DbaLogin -LoginRenameHashtable @{ "PreviousUser" = "newlogin" } -Source $Sql01 -Destination Localhost -SourceSqlCredential $sqlcred

        Copies PreviousUser and then renames it to newlogin.

    .EXAMPLE
        PS C:\> Get-DbaLogin -SqlInstance sql2016 | Out-GridView -Passthru | Copy-DbaLogin -Destination sql2017

        Displays all available logins on sql2016 in a grid view, then copies all selected logins to sql2017.

    #>
    [CmdletBinding(DefaultParameterSetName = "Default", SupportsShouldProcess)]
    param (
        [parameter(ParameterSetName = "SqlInstance", Mandatory)]
        [DbaInstanceParameter]$Source,
        [PSCredential]$SourceSqlCredential,
        [parameter(Mandatory)]
        [DbaInstanceParameter[]]$Destination,
        [PSCredential]$DestinationSqlCredential,
        [object[]]$Login,
        [object[]]$ExcludeLogin,
        [switch]$ExcludeSystemLogins,
        [switch]$SyncOnly,
        [parameter(ParameterSetName = "Live")]
        [parameter(ParameterSetName = "SqlInstance")]
        [switch]$SyncSaName,
        [parameter(ParameterSetName = "File", Mandatory)]
        [string]$OutFile,
        [parameter(ParameterSetName = "InputObject", ValueFromPipeline)]
        [object]$InputObject,
        [hashtable]$LoginRenameHashtable,
        [switch]$KillActiveConnection,
        [switch]$Force,
        [switch]$ExcludePermissionSync,
        [switch]$EnableException
    )

    begin {
        function Copy-Login {
            foreach ($sourceLogin in $sourceServer.Logins) {
                $userName = $sourceLogin.name

                $copyLoginStatus = [pscustomobject]@{
                    SourceServer      = $sourceServer.Name
                    DestinationServer = $destServer.Name
                    Type              = "Login - $($sourceLogin.LoginType)"
                    Name              = $userName
                    DestinationLogin  = $userName
                    SourceLogin       = $userName
                    Status            = $null
                    Notes             = $null
                    DateTime          = [DbaDateTime](Get-Date)
                }

                if ($Login -and $Login -notcontains $userName -or $ExcludeLogin -contains $userName) { continue }

                if ($sourceLogin.id -eq 1) { continue }

                if ($userName.StartsWith("##") -or $userName -eq 'sa') {
                    Write-Message -Level Verbose -Message "Skipping $userName."
                    continue
                }

                $serverName = Resolve-NetBiosName $sourceServer

                $currentLogin = $sourceServer.ConnectionContext.truelogin

                if ($currentLogin -eq $userName -and $force) {
                    if ($Pscmdlet.ShouldProcess("console", "Stating $userName is skipped because it is performing the migration.")) {
                        Write-Message -Level Verbose -Message "Cannot drop login performing the migration. Skipping."
                        $copyLoginStatus.Status = "Skipped"
                        $copyLoginStatus.Notes = "Current login"
                        $copyLoginStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                    }
                    continue
                }

                if (($destServer.LoginMode -ne [Microsoft.SqlServer.Management.Smo.ServerLoginMode]::Mixed) -and ($sourceLogin.LoginType -eq [Microsoft.SqlServer.Management.Smo.LoginType]::SqlLogin)) {
                    Write-Message -Level Verbose -Message "$Destination does not have Mixed Mode enabled. [$userName] is an SQL Login. Enable mixed mode authentication after the migration completes to use this type of login."
                }

                $userBase = ($userName.Split("\")[0]).ToLower()

                if ($serverName -eq $userBase -or $userName.StartsWith("NT ")) {
                    if ($sourceServer.ComputerName -ne $destServer.ComputerName) {
                        if ($Pscmdlet.ShouldProcess("console", "Stating $userName was skipped because it is a local machine name.")) {
                            Write-Message -Level Verbose -Message "$userName was skipped because it is a local machine name."
                            $copyLoginStatus.Status = "Skipped"
                            $copyLoginStatus.Notes = "Local machine name"
                            $copyLoginStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                        }
                        continue
                    } else {
                        if ($ExcludeSystemLogins) {
                            if ($Pscmdlet.ShouldProcess("console", "$userName was skipped because ExcludeSystemLogins was specified.")) {
                                Write-Message -Level Verbose -Message "$userName was skipped because ExcludeSystemLogins was specified."

                                $copyLoginStatus.Status = "Skipped"
                                $copyLoginStatus.Notes = "System login"
                                $copyLoginStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                            }
                            continue
                        }

                        if ($Pscmdlet.ShouldProcess("console", "Stating local login $userName since the source and destination server reside on the same machine.")) {
                            Write-Message -Level Verbose -Message "Copying local login $userName since the source and destination server reside on the same machine."
                        }
                    }
                }

                if ($null -ne $destServer.Logins.Item($userName) -and !$force) {
                    if ($Pscmdlet.ShouldProcess("console", "Stating $userName is skipped because it exists at destination.")) {
                        Write-Message -Level Verbose -Message "$userName already exists in destination. Use -Force to drop and recreate."
                        $copyLoginStatus.Status = "Skipped"
                        $copyLoginStatus.Notes = "Already exists on destination"
                        $copyLoginStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                    }
                    continue
                }

                if ($null -ne $destServer.Logins.Item($userName) -and $force) {
                    if ($userName -eq $destServer.ServiceAccount) {
                        if ($Pscmdlet.ShouldProcess("console", "$userName is the destination service account. Skipping drop.")) {
                            Write-Message -Level Verbose -Message "$userName is the destination service account. Skipping drop."

                            $copyLoginStatus.Status = "Skipped"
                            $copyLoginStatus.Notes = "Destination service account"
                            $copyLoginStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                        }
                        continue
                    }

                    if ($Pscmdlet.ShouldProcess($destinstance, "Dropping $userName")) {

                        # Kill connections, delete user
                        Write-Message -Level Verbose -Message "Attempting to migrate $userName"
                        Write-Message -Level Verbose -Message "Force was specified. Attempting to drop $userName on $destinstance."

                        try {
                            $ownedDbs = $destServer.Databases | Where-Object Owner -eq $userName

                            foreach ($ownedDb in $ownedDbs) {
                                Write-Message -Level Verbose -Message "Changing database owner for $($ownedDb.name) from $userName to sa."
                                $ownedDb.SetOwner('sa')
                                $ownedDb.Alter()
                            }

                            $ownedJobs = $destServer.JobServer.Jobs | Where-Object OwnerLoginName -eq $userName

                            foreach ($ownedJob in $ownedJobs) {
                                Write-Message -Level Verbose -Message "Changing job owner for $($ownedJob.name) from $userName to sa."
                                $ownedJob.Set_OwnerLoginName('sa')
                                $ownedJob.Alter()
                            }

                            $activeConnections = $destServer.EnumProcesses() | Where-Object Login -eq $userName

                            if ($activeConnections -and $KillActiveConnection) {
                                if (!$destServer.Logins.Item($userName).IsDisabled) {
                                    $disabled = $true
                                    $destServer.Logins.Item($userName).Disable()
                                }

                                $activeConnections | ForEach-Object { $destServer.KillProcess($_.Spid) }
                                Write-Message -Level Verbose -Message "-KillActiveConnection was provided. There are $($activeConnections.Count) active connections killed."
                                # just in case the kill didn't work, it'll leave behind a disabled account
                                if ($disabled) { $destServer.Logins.Item($userName).Enable() }
                            } elseif ($activeConnections) {
                                Write-Message -Level Verbose -Message "There are $($activeConnections.Count) active connections found for the login $userName. Utilize -KillActiveConnection with -Force to kill the connections."
                            }
                            $destServer.Logins.Item($userName).Drop()

                            Write-Message -Level Verbose -Message "Successfully dropped $userName on $destinstance."
                        } catch {
                            $copyLoginStatus.Status = "Failed"
                            $copyLoginStatus.Notes = (Get-ErrorMessage -Record $_).Message
                            $copyLoginStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                            Stop-Function -Message "Could not drop $userName." -Category InvalidOperation -ErrorRecord $_ -Target $destServer -Continue 3>$null
                        }
                    }
                }

                if ($Pscmdlet.ShouldProcess($destinstance, "Adding SQL login $userName")) {

                    Write-Message -Level Verbose -Message "Attempting to add $userName to $destinstance."
                    $destLogin = New-Object Microsoft.SqlServer.Management.Smo.Login($destServer, $userName)

                    Write-Message -Level Verbose -Message "Setting $userName SID to source username SID."
                    $destLogin.Set_Sid($sourceLogin.Get_Sid())

                    $defaultDb = $sourceLogin.DefaultDatabase

                    Write-Message -Level Verbose -Message "Setting login language to $($sourceLogin.Language)."
                    $destLogin.Language = $sourceLogin.Language

                    if ($null -eq $destServer.databases[$defaultDb]) {
                        # we end up here when the default database on source doesn't exist on dest
                        # if source login is a sysadmin, then set the default database to master
                        # if not, set it to tempdb (see #303)
                        $OrigdefaultDb = $defaultDb
                        try { $sourcesysadmins = $sourceServer.roles['sysadmin'].EnumMemberNames() }
                        catch { $sourcesysadmins = $sourceServer.roles['sysadmin'].EnumServerRoleMembers() }
                        if ($sourcesysadmins -contains $userName) {
                            $defaultDb = "master"
                        } else {
                            $defaultDb = "tempdb"
                        }
                        Write-Message -Level Verbose -Message "$OrigdefaultDb does not exist on destination. Setting defaultdb to $defaultDb."
                    }

                    Write-Message -Level Verbose -Message "Set $userName defaultdb to $defaultDb."
                    $destLogin.DefaultDatabase = $defaultDb

                    $checkexpiration = "ON"; $checkpolicy = "ON"

                    if ($sourceLogin.PasswordPolicyEnforced -eq $false) { $checkpolicy = "OFF" }

                    if (!$sourceLogin.PasswordExpirationEnabled) { $checkexpiration = "OFF" }

                    $destLogin.PasswordPolicyEnforced = $sourceLogin.PasswordPolicyEnforced
                    $destLogin.PasswordExpirationEnabled = $sourceLogin.PasswordExpirationEnabled

                    # Attempt to add SQL Login User
                    if ($sourceLogin.LoginType -eq "SqlLogin") {
                        $destLogin.LoginType = "SqlLogin"
                        $sourceLoginname = $sourceLogin.name

                        switch ($sourceServer.versionMajor) {
                            0 { $sql = "SELECT CONVERT(VARBINARY(256),password) as hashedpass FROM master.dbo.syslogins WHERE loginname='$sourceLoginname'" }
                            8 { $sql = "SELECT CONVERT(VARBINARY(256),password) as hashedpass FROM dbo.syslogins WHERE name='$sourceLoginname'" }
                            9 { $sql = "SELECT CONVERT(VARBINARY(256),password_hash) as hashedpass FROM sys.sql_logins where name='$sourceLoginname'" }
                            default {
                                $sql = "SELECT CAST(CONVERT(VARCHAR(256), CAST(LOGINPROPERTY(name,'PasswordHash')
                        AS VARBINARY(256)), 1) AS NVARCHAR(max)) AS hashedpass FROM sys.server_principals
                        WHERE principal_id = $($sourceLogin.id)"
                            }
                        }

                        try {
                            $hashedPass = $sourceServer.ConnectionContext.ExecuteScalar($sql)
                        } catch {
                            $hashedPassDt = $sourceServer.Databases['master'].ExecuteWithResults($sql)
                            $hashedPass = $hashedPassDt.Tables[0].Rows[0].Item(0)
                        }

                        if ($hashedPass.GetType().Name -ne "String") {
                            $passString = "0x"; $hashedPass | ForEach-Object { $passString += ("{0:X}" -f $_).PadLeft(2, "0") }
                            $hashedPass = $passString
                        }

                        try {
                            $destLogin.Create($hashedPass, [Microsoft.SqlServer.Management.Smo.LoginCreateOptions]::IsHashed)
                            $destLogin.Refresh()
                            Write-Message -Level Verbose -Message "Successfully added $userName to $destinstance."

                            $copyLoginStatus.Status = "Successful"
                            $copyLoginStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                        } catch {
                            try {
                                $sid = "0x"; $sourceLogin.sid | ForEach-Object { $sid += ("{0:X}" -f $_).PadLeft(2, "0") }
                                $sql = "CREATE LOGIN [$userName] WITH PASSWORD = $hashedPass HASHED, SID = $sid,
                                                DEFAULT_DATABASE = [$defaultDb], CHECK_POLICY = $checkpolicy,
                                                CHECK_EXPIRATION = $checkexpiration, DEFAULT_LANGUAGE = [$($sourceLogin.Language)]"

                                $null = $destServer.Query($sql)

                                $destLogin = $destServer.logins[$userName]
                                Write-Message -Level Verbose -Message "Successfully added $userName to $destinstance."

                                $copyLoginStatus.Status = "Successful"
                                $copyLoginStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                            } catch {
                                $copyLoginStatus.Status = "Failed"
                                $copyLoginStatus.Notes = (Get-ErrorMessage -Record $_).Message
                                $copyLoginStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                                Stop-Function -Message "Failed to add $userName to $destinstance." -Category InvalidOperation -ErrorRecord $_ -Target $destServer -Continue 3>$null
                            }
                        }
                    }
                    # Attempt to add Windows User
                    elseif ($sourceLogin.LoginType -eq "WindowsUser" -or $sourceLogin.LoginType -eq "WindowsGroup") {
                        Write-Message -Level Verbose -Message "Adding as login type $($sourceLogin.LoginType)"
                        $destLogin.LoginType = $sourceLogin.LoginType

                        Write-Message -Level Verbose -Message "Setting language as $($sourceLogin.Language)"
                        $destLogin.Language = $sourceLogin.Language

                        try {
                            $destLogin.Create()
                            $destLogin.Refresh()
                            Write-Message -Level Verbose -Message "Successfully added $userName to $destinstance."

                            $copyLoginStatus.Status = "Successful"
                            $copyLoginStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                        } catch {
                            $copyLoginStatus.Status = "Failed"
                            $copyLoginStatus.Notes = (Get-ErrorMessage -Record $_).Message
                            $copyLoginStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                            Stop-Function -Message "Failed to add $userName to $destinstance" -Category InvalidOperation -ErrorRecord $_ -Target $destServer -Continue 3>$null
                        }
                    }
                    # This script does not currently support certificate mapped or asymmetric key users.
                    else {
                        Write-Message -Level Verbose -Message "$($sourceLogin.LoginType) logins not supported. $($sourceLogin.name) skipped."

                        $copyLoginStatus.Status = "Skipped"
                        $copyLoginStatus.Notes = "$($sourceLogin.LoginType) not supported"
                        $copyLoginStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                        continue
                    }

                    if ($sourceLogin.IsDisabled) {
                        try {
                            $destLogin.Disable()
                        } catch {
                            $copyLoginStatus.Status = "Successful - but could not disable on destination"
                            $copyLoginStatus.Notes = (Get-ErrorMessage -Record $_).Message
                            $copyLoginStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                            Stop-Function -Message "$userName disabled on source, could not be disabled on $destinstance." -Category InvalidOperation -ErrorRecord $_ -Target $destServer  3>$null
                        }
                    }
                    if ($sourceLogin.DenyWindowsLogin) {
                        try {
                            $destLogin.DenyWindowsLogin = $true
                        } catch {
                            $copyLoginStatus.Status = "Successful - but could not deny login on destination"
                            $copyLoginStatus.Notes = (Get-ErrorMessage -Record $_).Message
                            $copyLoginStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                            Stop-Function -Message "$userName denied login on source, could not be denied login on $destinstance." -Category InvalidOperation -ErrorRecord $_ -Target $destServer 3>$null
                        }
                    }
                }

                if (-not $ExcludePermissionSync) {
                    if ($Pscmdlet.ShouldProcess($destinstance, "Updating SQL login $userName permissions")) {
                        Update-SqlPermission -sourceserver $sourceServer -sourcelogin $sourceLogin -destserver $destServer -destlogin $destLogin
                    }
                }

                if ($LoginRenameHashtable.Keys -contains $userName) {
                    $NewLogin = $LoginRenameHashtable[$userName]

                    if ($Pscmdlet.ShouldProcess($destinstance, "Renaming SQL Login $userName to $NewLogin")) {
                        try {
                            Rename-DbaLogin -SqlInstance $destServer -Login $userName -NewLogin $NewLogin

                            $copyLoginStatus.DestinationLogin = $NewLogin
                            $copyLoginStatus.Status = "Successful"
                            $copyLoginStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                        } catch {
                            $copyLoginStatus.DestinationLogin = $NewLogin
                            $copyLoginStatus.Status = "Failed to rename"
                            $copyLoginStatus.Notes = (Get-ErrorMessage -Record $_).Message
                            $copyLoginStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                            Stop-Function -Message "Issue renaming $userName to $NewLogin" -Category InvalidOperation -ErrorRecord $_ -Target $destServer 3>$null
                        }
                    }
                }
            }
        }
    }
    process {
        if (Test-FunctionInterrupt) { return }
        if ($InputObject) {
            $Source = $InputObject[0].Parent.Name
            $Sourceserver = $InputObject[0].Parent
            $Login = $InputObject.Name
        } else {
            try {
                $sourceServer = Connect-SqlInstance -SqlInstance $Source -SqlCredential $SourceSqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $Source
                return
            }
        }
        $sourceVersionMajor = $sourceServer.VersionMajor

        if ($OutFile) {
            Export-DbaLogin -SqlInstance $sourceServer -FilePath $OutFile -Login $Login -ExcludeLogin $ExcludeLogin
            continue
        }

        foreach ($destinstance in $Destination) {
            try {
                $destServer = Connect-SqlInstance -SqlInstance $destinstance -SqlCredential $DestinationSqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $destinstance -Continue
            }

            $destVersionMajor = $destServer.VersionMajor
            if ($sourceVersionMajor -gt 10 -and $destVersionMajor -lt 11) {
                Stop-Function -Message "Login migration from version $sourceVersionMajor to $destVersionMajor is not supported." -Category InvalidOperation -ErrorRecord $_ -Target $sourceServer
            }

            if ($sourceVersionMajor -lt 8 -or $destVersionMajor -lt 8) {
                Stop-Function -Message "SQL Server 7 and below are not supported." -Category InvalidOperation -ErrorRecord $_ -Target $sourceServer
            }

            if ($SyncOnly) {
                if ($Pscmdlet.ShouldProcess($destinstance, "Syncing $Login permissions")) {
                    Sync-DbaLoginPermission -Source $sourceServer -Destination $destServer -Login $Login -ExcludeLogin $ExcludeLogin
                    continue
                }
            }

            Write-Message -Level Verbose -Message "Attempting Login Migration."
            Copy-Login -sourceserver $sourceServer -destserver $destServer -Login $Login -Exclude $ExcludeLogin

            if ($SyncSaName) {
                $sa = $sourceServer.Logins | Where-Object id -eq 1
                $destSa = $destServer.Logins | Where-Object id -eq 1
                $saName = $sa.Name
                if ($saName -ne $destSa.name) {
                    Write-Message -Level Verbose -Message "Changing sa username to match source ($saName)."
                    if ($Pscmdlet.ShouldProcess($destinstance, "Changing sa username to match source ($saName)")) {
                        $destSa.Rename($saName)
                        $destSa.Alter()
                    }
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Copy-SqlLogin
    }
}

tools\dbatools\functions\Copy-DbaPolicyManagement.ps1

function Copy-DbaPolicyManagement {
    <#
    .SYNOPSIS
        Migrates SQL Policy Based Management Objects, including both policies and conditions.

    .DESCRIPTION
        By default, all policies and conditions are copied. If an object already exist on the destination, it will be skipped unless -Force is used.

        The -Policy and -Condition parameters are auto-populated for command-line completion and can be used to copy only specific objects.

    .PARAMETER Source
        Source SQL Server.You must have sysadmin access and server version must be SQL Server version 2008 or higher.

    .PARAMETER SourceSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Destination
        Destination Sql Server. You must have sysadmin access and server version must be SQL Server version 2008 or higher.

    .PARAMETER DestinationSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Policy
        The policy(ies) to process - this list is auto-populated from the server. If unspecified, all policies will be processed.

    .PARAMETER ExcludePolicy
        The policy(ies) to exclude - this list is auto-populated from the server

    .PARAMETER Condition
        The condition(s) to process - this list is auto-populated from the server. If unspecified, all conditions will be processed.

    .PARAMETER ExcludeCondition
        The condition(s) to exclude - this list is auto-populated from the server

    .PARAMETER Force
        If policies exists on destination server, it will be dropped and recreated.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Migration
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        Requires: sysadmin access on SQL Servers

    .LINK
        https://dbatools.io/Copy-DbaPolicyManagement

    .EXAMPLE
        PS C:\> Copy-DbaPolicyManagement -Source sqlserver2014a -Destination sqlcluster

        Copies all policies and conditions from sqlserver2014a to sqlcluster, using Windows credentials.

    .EXAMPLE
        PS C:\> Copy-DbaPolicyManagement -Source sqlserver2014a -Destination sqlcluster -SourceSqlCredential $cred

        Copies all policies and conditions from sqlserver2014a to sqlcluster, using SQL credentials for sqlserver2014a and Windows credentials for sqlcluster.

    .EXAMPLE
        PS C:\> Copy-DbaPolicyManagement -Source sqlserver2014a -Destination sqlcluster -WhatIf

        Shows what would happen if the command were executed.

    .EXAMPLE
        PS C:\> Copy-DbaPolicyManagement -Source sqlserver2014a -Destination sqlcluster -Policy 'xp_cmdshell must be disabled'

        Copies only one policy, 'xp_cmdshell must be disabled' from sqlserver2014a to sqlcluster. No conditions are migrated.

    #>
    [CmdletBinding(DefaultParameterSetName = "Default", SupportsShouldProcess)]
    param (
        [parameter(Mandatory)]
        [DbaInstanceParameter]$Source,
        [PSCredential]
        $SourceSqlCredential,
        [parameter(Mandatory)]
        [DbaInstanceParameter[]]$Destination,
        [PSCredential]
        $DestinationSqlCredential,
        [object[]]$Policy,
        [object[]]$ExcludePolicy,
        [object[]]$Condition,
        [object[]]$ExcludeCondition,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )
    
    begin {
        if (-not $script:isWindows) {
            Stop-Function -Message "Copy-DbaPolicyManagement does not support Linux - we're still waiting for the Core SMOs from Microsoft"
            return
        }
        try {
            $sourceServer = Connect-SqlInstance -SqlInstance $Source -SqlCredential $SourceSqlCredential -MinimumVersion 10
        } catch {
            Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $Source
            return
        }
        $sourceSqlConn = $sourceServer.ConnectionContext.SqlConnectionObject
        $sourceSqlStoreConnection = New-Object Microsoft.SqlServer.Management.Sdk.Sfc.SqlStoreConnection $sourceSqlConn
        $sourceStore = New-Object  Microsoft.SqlServer.Management.DMF.PolicyStore $sourceSqlStoreConnection
        $storePolicies = $sourceStore.Policies | Where-Object { $_.IsSystemObject -eq $false }
        $storeConditions = $sourceStore.Conditions | Where-Object { $_.IsSystemObject -eq $false }
    }
    process {
        if (Test-FunctionInterrupt) { return }
        foreach ($destinstance in $Destination) {
            try {
                $destServer = Connect-SqlInstance -SqlInstance $destinstance -SqlCredential $DestinationSqlCredential -MinimumVersion 10
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $destinstance -Continue
            }
            $destSqlConn = $destServer.ConnectionContext.SqlConnectionObject
            $destSqlStoreConnection = New-Object Microsoft.SqlServer.Management.Sdk.Sfc.SqlStoreConnection $destSqlConn
            $destStore = New-Object  Microsoft.SqlServer.Management.DMF.PolicyStore $destSqlStoreConnection

            if ($Policy) {
                $storePolicies = $storePolicies | Where-Object Name -In $Policy
            }
            if ($ExcludePolicy) {
                $storePolicies = $storePolicies | Where-Object Name -NotIn $ExcludePolicy
            }
            if ($Condition) {
                $storeConditions = $storeConditions | Where-Object Name -In $Condition
            }
            if ($ExcludeCondition) {
                $storeConditions = $storeConditions | Where-Object Name -NotIn $ExcludeCondition
            }

            if ($Policy -and $Condition) {
                $storeConditions = $null
                $storePolicies = $null
            }

            <#
                        Conditions
        #>

            Write-Message -Level Verbose -Message "Migrating conditions"
            foreach ($condition in $storeConditions) {
                $conditionName = $condition.Name

                $copyConditionStatus = [pscustomobject]@{
                    SourceServer      = $sourceServer.Name
                    DestinationServer = $destServer.Name
                    Name              = $conditionName
                    Type              = "Policy Condition"
                    Status            = $null
                    Notes             = $null
                    DateTime          = [DbaDateTime](Get-Date)
                }

                if ($null -ne $destStore.Conditions[$conditionName]) {
                    if ($force -eq $false) {
                        Write-Message -Level Verbose -Message "condition '$conditionName' was skipped because it already exists on $destinstance. Use -Force to drop and recreate"

                        $copyConditionStatus.Status = "Skipped"
                        $copyConditionStatus.Notes = "Already exists on destination"
                        $copyConditionStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                        continue
                    } else {
                        if ($Pscmdlet.ShouldProcess($destinstance, "Attempting to drop $conditionName")) {
                            Write-Message -Level Verbose -Message "Condition '$conditionName' exists on $destinstance. Force specified. Dropping $conditionName."

                            try {
                                $dependentPolicies = $destStore.Conditions[$conditionName].EnumDependentPolicies()
                                foreach ($dependent in $dependentPolicies) {
                                    $dependent.Drop()
                                    $destStore.Conditions.Refresh()
                                }
                                $destStore.Conditions[$conditionName].Drop()
                            } catch {
                                $copyConditionStatus.Status = "Failed"
                                $copyConditionStatus.Notes = (Get-ErrorMessage -Record $_).Message
                                $copyConditionStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                                Stop-Function -Message "Issue dropping condition on $destinstance" -Target $conditionName -ErrorRecord $_ -Continue
                            }
                        }
                    }
                }

                if ($Pscmdlet.ShouldProcess($destinstance, "Migrating condition $conditionName")) {
                    try {
                        $sql = $condition.ScriptCreate().GetScript() | Out-String
                        Write-Message -Level Debug -Message $sql
                        Write-Message -Level Verbose -Message "Copying condition $conditionName"
                        $null = $destServer.Query($sql)
                        $destStore.Conditions.Refresh()

                        $copyConditionStatus.Status = "Successful"
                        $copyConditionStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                    } catch {
                        $copyConditionStatus.Status = "Failed"
                        $copyConditionStatus.Notes = (Get-ErrorMessage -Record $_).Message
                        $copyConditionStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                        Stop-Function -Message "Issue creating condition on $destinstance" -Target $conditionName -ErrorRecord $_
                    }
                }
            }

            <#
                        Policies
        #>

            Write-Message -Level Verbose -Message "Migrating policies"
            foreach ($policy in $storePolicies) {
                $policyName = $policy.Name

                $copyPolicyStatus = [pscustomobject]@{
                    SourceServer      = $sourceServer.Name
                    DestinationServer = $destServer.Name
                    Name              = $policyName
                    Type              = "Policy"
                    Status            = $null
                    Notes             = $null
                    DateTime          = [DbaDateTime](Get-Date)
                }

                if ($null -ne $destStore.Policies[$policyName]) {
                    if ($force -eq $false) {
                        Write-Message -Level Verbose -Message "Policy '$policyName' was skipped because it already exists on $destinstance. Use -Force to drop and recreate"

                        $copyPolicyStatus.Status = "Skipped"
                        $copyPolicyStatus.Notes = "Already exists on destination"
                        $copyPolicyStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                        continue
                    } else {
                        if ($Pscmdlet.ShouldProcess($destinstance, "Attempting to drop $policyName")) {
                            Write-Message -Level Verbose -Message "Policy '$policyName' exists on $destinstance. Force specified. Dropping $policyName."

                            try {
                                $destStore.Policies[$policyName].Drop()
                                $destStore.Policies.refresh()
                            } catch {
                                $copyPolicyStatus.Status = "Failed"
                                $copyPolicyStatus.Notes = (Get-ErrorMessage -Record $_).Message
                                $copyPolicyStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                                Stop-Function -Message "Issue dropping policy on $destinstance" -Target $policyName -ErrorRecord $_ -Continue
                            }
                        }
                    }
                }

                if ($Pscmdlet.ShouldProcess($destinstance, "Migrating policy $policyName")) {
                    try {
                        $destStore.Conditions.Refresh()
                        $destStore.Policies.Refresh()
                        $sql = $policy.ScriptCreateWithDependencies().GetScript() | Out-String
                        Write-Message -Level Debug -Message $sql
                        Write-Message -Level Verbose -Message "Copying policy $policyName"
                        $null = $destServer.Query($sql)

                        $copyPolicyStatus.Status = "Successful"
                        $copyPolicyStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                    } catch {
                        $copyPolicyStatus.Status = "Failed"
                        $copyPolicyStatus.Notes = (Get-ErrorMessage -Record $_).Message
                        $copyPolicyStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                        # This is usually because of a duplicate dependent from above. Just skip for now.
                        Stop-Function -Message "Issue creating policy on $destinstance" -Target $policyName -ErrorRecord $_ -Continue
                    }
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Copy-SqlPolicyManagement
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Copy-DbaSqlPolicyManagement
    }
}

tools\dbatools\functions\Copy-DbaResourceGovernor.ps1

function Copy-DbaResourceGovernor {
    <#
    .SYNOPSIS
        Migrates Resource Pools

    .DESCRIPTION
        By default, all non-system resource pools are migrated. If the pool already exists on the destination, it will be skipped unless -Force is used.

        The -ResourcePool parameter is auto-populated for command-line completion and can be used to copy only specific objects.

    .PARAMETER Source
        Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2008 or higher.

    .PARAMETER SourceSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Destination
        Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2008 or higher.

    .PARAMETER DestinationSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER ResourcePool
        Specifies the resource pool(s) to process. Options for this list are auto-populated from the server. If unspecified, all resource pools will be processed.

    .PARAMETER ExcludeResourcePool
        Specifies the resource pool(s) to exclude. Options for this list are auto-populated from the server

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER Force
        If this switch is enabled, the policies will be dropped and recreated on Destination.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Migration, ResourceGovernor
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        Requires: sysadmin access on SQL Servers

    .LINK
        https://dbatools.io/Copy-DbaResourceGovernor

    .EXAMPLE
        PS C:\> Copy-DbaResourceGovernor -Source sqlserver2014a -Destination sqlcluster

        Copies all all non-system resource pools from sqlserver2014a to sqlcluster using Windows credentials to connect to the SQL Server instances..

    .EXAMPLE
        PS C:\> Copy-DbaResourceGovernor -Source sqlserver2014a -Destination sqlcluster -SourceSqlCredential $cred

        Copies all all non-system resource pools from sqlserver2014a to sqlcluster using SQL credentials to connect to sqlserver2014a and Windows credentials to connect to sqlcluster.

    .EXAMPLE
        PS C:\> Copy-DbaResourceGovernor -Source sqlserver2014a -Destination sqlcluster -WhatIf

        Shows what would happen if the command were executed.

    #>
    [CmdletBinding(DefaultParameterSetName = "Default", SupportsShouldProcess)]
    param (
        [parameter(Mandatory)]
        [DbaInstanceParameter]$Source,
        [PSCredential]$SourceSqlCredential,
        [parameter(Mandatory)]
        [DbaInstanceParameter[]]$Destination,
        [PSCredential]$DestinationSqlCredential,
        [object[]]$ResourcePool,
        [object[]]$ExcludeResourcePool,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )
    process {
        try {
            $sourceServer = Connect-SqlInstance -SqlInstance $Source -SqlCredential $SourceSqlCredential -MinimumVersion 10
        } catch {
            Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $Source
            return
        }
        $sourceClassifierFunction = Get-DbaRgClassifierFunction -SqlInstance $sourceServer

        foreach ($destinstance in $Destination) {
            try {
                $destServer = Connect-SqlInstance -SqlInstance $destinstance -SqlCredential $DestinationSqlCredential -MinimumVersion 10
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $destinstance -Continue
            }
            $destClassifierFunction = Get-DbaRgClassifierFunction -SqlInstance $destServer

            $copyResourceGovSetting = [pscustomobject]@{
                SourceServer      = $sourceServer.Name
                DestinationServer = $destServer.Name
                Type              = "Resource Governor Settings"
                Name              = "All Settings"
                Status            = $null
                Notes             = $null
                DateTime          = [DbaDateTime](Get-Date)
            }

            $copyResourceGovClassifierFunc = [pscustomobject]@{
                SourceServer      = $sourceServer.Name
                DestinationServer = $destServer.Name
                Type              = "Resource Governor Settings"
                Name              = "Classifier Function"
                Status            = $null
                Notes             = $null
                DateTime          = [DbaDateTime](Get-Date)
            }

            if ($Pscmdlet.ShouldProcess($destinstance, "Updating Resource Governor settings")) {
                if ($destServer.Edition -notmatch 'Enterprise' -and $destServer.Edition -notmatch 'Datacenter' -and $destServer.Edition -notmatch 'Developer') {
                    Write-Message -Level Verbose -Message "The resource governor is not available in this edition of SQL Server. You can manipulate resource governor metadata but you will not be able to apply resource governor configuration. Only Enterprise edition of SQL Server supports resource governor."
                } else {
                    try {
                        Write-Message -Level Verbose -Message "Managing classifier function."
                        if (!$sourceClassifierFunction) {
                            $copyResourceGovClassifierFunc.Status = "Skipped"
                            $copyResourceGovClassifierFunc.Notes = $null
                            $copyResourceGovClassifierFunc | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                        } else {
                            $fullyQualifiedFunctionName = $sourceClassifierFunction.Schema + "." + $sourceClassifierFunction.Name

                            if (!$destClassifierFunction) {
                                $destServer = Connect-SqlInstance -SqlInstance $destinstance -SqlCredential $DestinationSqlCredential
                                $destFunction = $destServer.Databases["master"].UserDefinedFunctions[$sourceClassifierFunction.Name]
                                if ($destFunction) {
                                    Write-Message -Level Verbose -Message "Dropping the function with the source classifier function name."
                                    $destFunction.Drop()
                                }

                                Write-Message -Level Verbose -Message "Creating function."
                                $destServer.Query($sourceClassifierFunction.Script())

                                $sql = "ALTER RESOURCE GOVERNOR WITH (CLASSIFIER_FUNCTION = $fullyQualifiedFunctionName);"
                                Write-Message -Level Debug -Message $sql
                                Write-Message -Level Verbose -Message "Mapping Resource Governor classifier function."
                                $destServer.Query($sql)

                                $copyResourceGovClassifierFunc.Status = "Successful"
                                $copyResourceGovClassifierFunc.Notes = "The new classifier function has been created"
                                $copyResourceGovClassifierFunc | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                                $sql = "ALTER RESOURCE GOVERNOR RECONFIGURE;"
                                Write-Message -Level Debug -Message $sql
                                Write-Message -Level Verbose -Message "Reconfiguring Resource Governor."
                                $destServer.Query($sql)
                            } else {
                                if ($Force -eq $false) {
                                    $copyResourceGovClassifierFunc.Status = "Skipped"
                                    $copyResourceGovClassifierFunc.Notes = "Already exists on destination"
                                    $copyResourceGovClassifierFunc | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                                } else {

                                    $sql = "ALTER RESOURCE GOVERNOR WITH (CLASSIFIER_FUNCTION = NULL);"
                                    Write-Message -Level Debug -Message $sql
                                    Write-Message -Level Verbose -Message "Disabling the Resource Governor."
                                    $destServer.Query($sql)

                                    $sql = "ALTER RESOURCE GOVERNOR RECONFIGURE;"
                                    Write-Message -Level Debug -Message $sql
                                    Write-Message -Level Verbose -Message "Reconfiguring Resource Governor."
                                    $destServer.Query($sql)

                                    Write-Message -Level Verbose -Message "Dropping the destination classifier function."
                                    $destServer = Connect-SqlInstance -SqlInstance $destinstance -SqlCredential $DestinationSqlCredential
                                    $destFunction = $destServer.Databases["master"].UserDefinedFunctions[$sourceClassifierFunction.Name]
                                    $destClassifierFunction.Drop()

                                    Write-Message -Level Verbose -Message "Re-creating the Resource Governor classifier function."
                                    $destServer.Query($sourceClassifierFunction.Script())

                                    $sql = "ALTER RESOURCE GOVERNOR WITH (CLASSIFIER_FUNCTION = $fullyQualifiedFunctionName);"
                                    Write-Message -Level Debug -Message $sql
                                    Write-Message -Level Verbose -Message "Mapping Resource Governor classifier function."
                                    $destServer.Query($sql)

                                    $sql = "ALTER RESOURCE GOVERNOR RECONFIGURE;"
                                    Write-Message -Level Debug -Message $sql
                                    Write-Message -Level Verbose -Message "Reconfiguring Resource Governor."
                                    $destServer.Query($sql)

                                    $copyResourceGovClassifierFunc.Status = "Successful"
                                    $copyResourceGovClassifierFunc.Notes = "The old classifier function has been overwritten."
                                    $copyResourceGovClassifierFunc | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                                }
                            }
                        }
                    } catch {
                        $copyResourceGovSetting.Status = "Failed"
                        $copyResourceGovSetting.Notes = (Get-ErrorMessage -Record $_)
                        $copyResourceGovSetting | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                        $sql = "ALTER RESOURCE GOVERNOR RECONFIGURE;"
                        Write-Message -Level Debug -Message $sql
                        Write-Message -Level Verbose -Message "Reconfiguring Resource Governor."
                        $destServer.Query($sql)

                        Stop-Function -Message "Not able to update settings." -Target $destServer -ErrorRecord $_
                    }
                }
            }

            # Pools
            if ($ResourcePool) {
                $pools = $sourceServer.ResourceGovernor.ResourcePools | Where-Object Name -In $ResourcePool
            } elseif ($ExcludeResourcePool) {
                $pool = $sourceServer.ResourceGovernor.ResourcePools | Where-Object Name -NotIn $ExcludeResourcePool
            } else {
                $pools = $sourceServer.ResourceGovernor.ResourcePools | Where-Object { $_.Name -notin "internal", "default" }
            }

            Write-Message -Level Verbose -Message "Migrating pools."
            foreach ($pool in $pools) {
                $poolName = $pool.Name

                $copyResourceGovPool = [pscustomobject]@{
                    SourceServer      = $sourceServer.Name
                    DestinationServer = $destServer.Name
                    Type              = "Resource Governor Pool"
                    Name              = $poolName
                    Status            = $null
                    Notes             = $null
                    DateTime          = [DbaDateTime](Get-Date)
                }

                if ($null -ne $destServer.ResourceGovernor.ResourcePools[$poolName]) {
                    if ($force -eq $false) {
                        Write-Message -Level Verbose -Message "Pool '$poolName' was skipped because it already exists on $destinstance. Use -Force to drop and recreate."

                        $copyResourceGovPool.Status = "Skipped"
                        $copyResourceGovPool.Notes = "Already exists on destination"
                        $copyResourceGovPool | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                        continue
                    } else {
                        if ($Pscmdlet.ShouldProcess($destinstance, "Attempting to drop $poolName")) {
                            Write-Message -Level Verbose -Message "Pool '$poolName' exists on $destinstance."
                            Write-Message -Level Verbose -Message "Force specified. Dropping $poolName."

                            try {
                                $destServer = Connect-SqlInstance -SqlInstance $destinstance -SqlCredential $DestinationSqlCredential
                                $destPool = $destServer.ResourceGovernor.ResourcePools[$poolName]
                                $workloadGroups = $destPool.WorkloadGroups
                                foreach ($workloadGroup in $workloadGroups) {
                                    $workloadGroup.Drop()
                                }
                                $destPool.Drop()
                                $destServer.ResourceGovernor.Alter()
                            } catch {
                                $copyResourceGovPool.Status = "Failed to drop from Destination"
                                $copyResourceGovPool.Notes = (Get-ErrorMessage -Record $_)
                                $copyResourceGovPool | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                                Stop-Function -Message "Unable to drop: $_ Moving on." -Target $destPool -ErrorRecord $_ -Continue

                                $sql = "ALTER RESOURCE GOVERNOR RECONFIGURE;"
                                Write-Message -Level Debug -Message $sql
                                Write-Message -Level Verbose -Message "Reconfiguring Resource Governor."
                                $destServer.Query($sql)
                            }
                        }
                    }
                }

                if ($Pscmdlet.ShouldProcess($destinstance, "Migrating pool $poolName")) {
                    try {
                        $sql = $pool.Script() | Out-String
                        Write-Message -Level Debug -Message $sql
                        Write-Message -Level Verbose -Message "Copying pool $poolName."
                        $destServer.Query($sql)

                        $copyResourceGovPool.Status = "Successful"
                        $copyResourceGovPool | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                        $workloadGroups = $pool.WorkloadGroups
                        foreach ($workloadGroup in $workloadGroups) {
                            $workgroupName = $workloadGroup.Name

                            $copyResourceGovWorkGroup = [pscustomobject]@{
                                SourceServer      = $sourceServer.Name
                                DestinationServer = $destServer.Name
                                Type              = "Resource Governor Pool Workgroup"
                                Name              = $workgroupName
                                Status            = $null
                                Notes             = $null
                                DateTime          = [DbaDateTime](Get-Date)
                            }

                            $sql = $workloadGroup.Script() | Out-String
                            Write-Message -Level Debug -Message $sql
                            Write-Message -Level Verbose -Message "Copying $workgroupName."
                            $destServer.Query($sql)

                            $copyResourceGovWorkGroup.Status = "Successful"
                            $copyResourceGovWorkGroup | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                            $sql = "ALTER RESOURCE GOVERNOR RECONFIGURE;"
                            Write-Message -Level Debug -Message $sql
                            Write-Message -Level Verbose -Message "Reconfiguring Resource Governor."
                            $destServer.Query($sql)
                        }
                    } catch {
                        if ($copyResourceGovWorkGroup) {
                            $copyResourceGovWorkGroup.Status = "Failed"
                            $copyResourceGovWorkGroup.Notes = (Get-ErrorMessage -Record $_)
                            $copyResourceGovWorkGroup | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                        }
                        Stop-Function -Message "Unable to migrate pool." -Target $pool -ErrorRecord $_
                    }
                }
            }

            if ($Pscmdlet.ShouldProcess($destinstance, "Reconfiguring")) {
                if ($destServer.Edition -notmatch 'Enterprise' -and $destServer.Edition -notmatch 'Datacenter' -and $destServer.Edition -notmatch 'Developer') {
                    Write-Message -Level Verbose -Message "The resource governor is not available in this edition of SQL Server. You can manipulate resource governor metadata but you will not be able to apply resource governor configuration. Only Enterprise edition of SQL Server supports resource governor."
                } else {

                    Write-Message -Level Verbose -Message "Reconfiguring Resource Governor."
                    try {
                        if (!$sourceServer.ResourceGovernor.Enabled) {
                            $sql = "ALTER RESOURCE GOVERNOR DISABLE"
                            $destServer.Query($sql)

                            $sql = "ALTER RESOURCE GOVERNOR RECONFIGURE;"
                            Write-Message -Level Debug -Message $sql
                            Write-Message -Level Verbose -Message "Reconfiguring Resource Governor."
                            $destServer.Query($sql)
                        } else {
                            $sql = "ALTER RESOURCE GOVERNOR RECONFIGURE"
                            $destServer.Query($sql)
                        }
                    } catch {
                        $altermsg = $_.Exception
                    }


                    $copyResourceGovReconfig = [pscustomobject]@{
                        SourceServer      = $sourceServer.Name
                        DestinationServer = $destServer.Name
                        Type              = "Reconfigure Resource Governor"
                        Name              = "Reconfigure Resource Governor"
                        Status            = "Successful"
                        Notes             = $altermsg
                        DateTime          = [DbaDateTime](Get-Date)
                    }
                    $copyResourceGovReconfig | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Copy-SqlResourceGovernor
    }
}

tools\dbatools\functions\Copy-DbaServerAudit.ps1

function Copy-DbaServerAudit {
    <#
    .SYNOPSIS
        Copy-DbaServerAudit migrates server audits from one SQL Server to another.

    .DESCRIPTION
        By default, all audits are copied. The -Audit parameter is auto-populated for command-line completion and can be used to copy only specific audits.

        If the audit already exists on the destination, it will be skipped unless -Force is used.

    .PARAMETER Source
        Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.

    .PARAMETER SourceSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Destination
        Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.

    .PARAMETER DestinationSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Audit
        The audit(s) to process. Options for this list are auto-populated from the server. If unspecified, all audits will be processed.

    .PARAMETER ExcludeAudit
        The audit(s) to exclude. Options for this list are auto-populated from the server.

    .PARAMETER Path
        Destination file path. If not specified, the file path of the source will be used (or the default data directory).

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER Force
        If this switch is enabled, the audits will be dropped and recreated on Destination.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Migration
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        Requires: sysadmin access on SQL Servers

    .LINK
        https://dbatools.io/Copy-DbaServerAudit

    .EXAMPLE
        PS C:\> Copy-DbaServerAudit -Source sqlserver2014a -Destination sqlcluster

        Copies all server audits from sqlserver2014a to sqlcluster, using Windows credentials. If audits with the same name exist on sqlcluster, they will be skipped.

    .EXAMPLE
        PS C:\> Copy-DbaServerAudit -Source sqlserver2014a -Destination sqlcluster -Audit tg_noDbDrop -SourceSqlCredential $cred -Force

        Copies a single audit, the tg_noDbDrop audit from sqlserver2014a to sqlcluster, using SQL credentials for sqlserver2014a and Windows credentials for sqlcluster. If an audit with the same name exists on sqlcluster, it will be dropped and recreated because -Force was used.

    .EXAMPLE
        PS C:\> Copy-DbaServerAudit -Source sqlserver2014a -Destination sqlcluster -WhatIf -Force

        Shows what would happen if the command were executed using force.

    .EXAMPLE
        PS C:\> Copy-DbaServerAudit -Source sqlserver-0 -Destination sqlserver-1 -Audit audit1 -Path 'C:\audit1'

        Copies audit audit1 from sqlserver-0 to sqlserver-1. The file path on sqlserver-1 will be set to 'C:\audit1'.
    #>
    [CmdletBinding(DefaultParameterSetName = "Default", SupportsShouldProcess)]
    param (
        [parameter(Mandatory)]
        [DbaInstanceParameter]$Source,
        [PSCredential]
        $SourceSqlCredential,
        [parameter(Mandatory)]
        [DbaInstanceParameter[]]$Destination,
        [PSCredential]
        $DestinationSqlCredential,
        [object[]]$Audit,
        [object[]]$ExcludeAudit,
        [string]$Path,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        try {
            $sourceServer = Connect-SqlInstance -SqlInstance $Source -SqlCredential $SourceSqlCredential -MinimumVersion 10
        } catch {
            Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $Source
            return
        }
        $serverAudits = $sourceServer.Audits
    }
    process {
        if (Test-FunctionInterrupt) { return }
        foreach ($destinstance in $Destination) {

            try {
                $destServer = Connect-SqlInstance -SqlInstance $destinstance -SqlCredential $DestinationSqlCredential -MinimumVersion 10
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $destinstance -Continue
            }
            $destAudits = $destServer.Audits
            foreach ($currentAudit in $serverAudits) {
                $auditName = $currentAudit.Name

                $copyAuditStatus = [pscustomobject]@{
                    SourceServer      = $sourceServer.Name
                    DestinationServer = $destServer.Name
                    Name              = $auditName
                    Type              = "Server Audit"
                    Status            = $null
                    Notes             = $null
                    DateTime          = [DbaDateTime](Get-Date)
                }

                if ($Audit -and $auditName -notin $Audit -or $auditName -in $ExcludeAudit) {
                    continue
                }

                if ($Path) {
                    $currentAudit.FilePath = $Path
                }

                if ($destAudits.Name -contains $auditName) {
                    if ($force -eq $false) {
                        if ($Pscmdlet.ShouldProcess($destinstance, "Server audit $auditName exists at destination. Use -Force to drop and migrate.")) {
                            $copyAuditStatus.Status = "Skipped"
                            $copyAuditStatus.Notes = "Already exists on destination"
                            Write-Message -Level Verbose -Message "Server audit $auditName exists at destination. Use -Force to drop and migrate."
                        }
                        continue
                    } else {
                        if ($Pscmdlet.ShouldProcess($destinstance, "Dropping server audit $auditName")) {
                            try {
                                Write-Message -Level Verbose -Message "Dropping server audit $auditName."
                                foreach ($spec in $destServer.ServerAuditSpecifications) {
                                    if ($auditSpecification.Auditname -eq $auditName) {
                                        $auditSpecification.Drop()
                                    }
                                }

                                $destServer.audits[$auditName].Disable()
                                $destServer.audits[$auditName].Alter()
                                $destServer.audits[$auditName].Drop()
                            } catch {
                                $copyAuditStatus.Status = "Failed"
                                $copyAuditStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                                Stop-Function -Message "Issue dropping audit from destination." -Target $auditName -ErrorRecord $_
                            }
                        }
                    }
                }

                if ($null -ne ($currentAudit.Filepath) -and -not (Test-DbaPath -SqlInstance $destServer -Path $currentAudit.Filepath)) {
                    if ($Force -eq $false) {
                        if ($Pscmdlet.ShouldProcess($destinstance, "$($currentAudit.Filepath) does not exist on $destinstance. Skipping $auditName. Specify -Force to create the directory.")) {
                            $copyAuditStatus.Status = "Skipped"
                            $copyAuditStatus.Notes = "$($currentAudit.Filepath) does not exist on $destinstance. Skipping $auditName. Specify -Force to create the directory."
                            $copyAuditStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                        }
                        continue
                    } else {
                        Write-Message -Level Verbose -Message "Force specified. Creating directory."

                        $destNetBios = Resolve-NetBiosName $destServer
                        $root = $currentAudit.Filepath.Substring(0, 3)
                        $rootUnc = Join-AdminUnc $destNetBios $root

                        if ((Test-Path $rootUnc) -eq $true) {
                            if ($Pscmdlet.ShouldProcess($destinstance, "Creating directory $($currentAudit.Filepath)")) {
                                try {
                                    $null = New-DbaDirectory -SqlInstance $destServer -Path $currentAudit.Filepath -EnableException
                                } catch {
                                    Write-Message -Level Warning -Message "Couldn't create directory $($currentAudit.Filepath). Using default data directory."
                                    $datadir = Get-SqlDefaultPaths $destServer data
                                    $currentAudit.FilePath = $datadir
                                }
                            }
                        } else {
                            $datadir = Get-SqlDefaultPaths $destServer data
                            $currentAudit.FilePath = $datadir
                        }
                    }
                }
                if ($Pscmdlet.ShouldProcess($destinstance, "Creating server audit $auditName")) {
                    try {
                        Write-Message -Level Verbose -Message "File path $($currentAudit.Filepath) exists on $destinstance."
                        Write-Message -Level Verbose -Message "Copying server audit $auditName."
                        $sql = $currentAudit.Script() | Out-String
                        $destServer.Query($sql)
                        $copyAuditStatus.Status = "Successful"
                        $copyAuditStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                    } catch {
                        $copyAuditStatus.Status = "Failed"
                        $copyAuditStatus.Notes = (Get-ErrorMessage -Record $_)
                        $copyAuditStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                        Stop-Function -Message "Issue creating audit." -Target $auditName -ErrorRecord $_
                    }
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Copy-SqlAudit
    }
}

tools\dbatools\functions\Copy-DbaServerAuditSpecification.ps1

function Copy-DbaServerAuditSpecification {
    <#
    .SYNOPSIS
        Copy-DbaServerAuditSpecification migrates server audit specifications from one SQL Server to another.

    .DESCRIPTION
        By default, all audits are copied. The -AuditSpecification parameter is auto-populated for command-line completion and can be used to copy only specific audits.

        If the audit specification already exists on the destination, it will be skipped unless -Force is used.

    .PARAMETER Source
        Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.

    .PARAMETER SourceSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Destination
        Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.

    .PARAMETER DestinationSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER AuditSpecification
        The Server Audit Specification(s) to process. Options for this list are auto-populated from the server. If unspecified, all Server Audit Specifications will be processed.

    .PARAMETER ExcludeAuditSpecification
        The Server Audit Specification(s) to exclude. Options for this list are auto-populated from the server

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER Force
        If this switch is enabled, the Audits Specifications will be dropped and recreated on Destination.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Migration,ServerAudit,AuditSpecification
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        Requires: sysadmin access on SQL Servers

    .LINK
        https://dbatools.io/Copy-DbaServerAuditSpecification

    .EXAMPLE
        PS C:\> Copy-DbaServerAuditSpecification -Source sqlserver2014a -Destination sqlcluster

        Copies all server audits from sqlserver2014a to sqlcluster using Windows credentials to connect. If audits with the same name exist on sqlcluster, they will be skipped.

    .EXAMPLE
        PS C:\> Copy-DbaServerAuditSpecification -Source sqlserver2014a -Destination sqlcluster -AuditSpecification tg_noDbDrop -SourceSqlCredential $cred -Force

        Copies a single audit, the tg_noDbDrop audit from sqlserver2014a to sqlcluster using SQL credentials to connect to sqlserver2014a and Windows credentials to connect to sqlcluster. If an audit specification with the same name exists on sqlcluster, it will be dropped and recreated because -Force was used.

    .EXAMPLE
        PS C:\> Copy-DbaServerAuditSpecification -Source sqlserver2014a -Destination sqlcluster -WhatIf -Force

        Shows what would happen if the command were executed using force.

    #>
    [CmdletBinding(DefaultParameterSetName = "Default", SupportsShouldProcess)]
    param (
        [parameter(Mandatory)]
        [DbaInstanceParameter]$Source,
        [PSCredential]$SourceSqlCredential,
        [parameter(Mandatory)]
        [DbaInstanceParameter[]]$Destination,
        [PSCredential]$DestinationSqlCredential,
        [object[]]$AuditSpecification,
        [object[]]$ExcludeAuditSpecification,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        try {
            $sourceServer = Connect-SqlInstance -SqlInstance $Source -SqlCredential $SourceSqlCredential -MinimumVersion 10
        } catch {
            Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $Source
            return
        }

        if (!(Test-SqlSa -SqlInstance $sourceServer -SqlCredential $SourceSqlCredential)) {
            Stop-Function -Message "Not a sysadmin on $source. Quitting."
            return
        }

        $AuditSpecifications = $sourceServer.ServerAuditSpecifications
    }
    process {
        if (Test-FunctionInterrupt) { return }
        foreach ($destinstance in $Destination) {
            try {
                $destServer = Connect-SqlInstance -SqlInstance $destinstance -SqlCredential $DestinationSqlCredential -MinimumVersion 10
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $destinstance -Continue
            }

            if (!(Test-SqlSa -SqlInstance $destServer -SqlCredential $DestinationSqlCredential)) {
                Stop-Function -Message "Not a sysadmin on $destinstance. Quitting."
                return
            }

            if ($destServer.VersionMajor -lt $sourceServer.VersionMajor) {
                Stop-Function -Message "Migration from version $($destServer.VersionMajor) to version $($sourceServer.VersionMajor) is not supported."
                return
            }
            $destAudits = $destServer.ServerAuditSpecifications
            foreach ($auditSpec in $AuditSpecifications) {
                $auditSpecName = $auditSpec.Name

                $copyAuditSpecStatus = [pscustomobject]@{
                    SourceServer      = $sourceServer.Name
                    DestinationServer = $destServer.Name
                    Type              = "Server Audit Specification"
                    Name              = $auditSpecName
                    Status            = $null
                    Notes             = $null
                    DateTime          = [DbaDateTime](Get-Date)
                }

                if ($AuditSpecification -and $auditSpecName -notin $AuditSpecification -or $auditSpecName -in $ExcludeAuditSpecification) {
                    continue
                }

                $destServer.Audits.Refresh()
                if ($destServer.Audits.Name -notcontains $auditSpec.AuditName) {
                    if ($Pscmdlet.ShouldProcess($destinstance, "Audit $($auditSpec.AuditName) does not exist on $destinstance. Skipping $auditSpecName.")) {
                        $copyAuditSpecStatus.Status = "Skipped"
                        $copyAuditSpecStatus.Notes = "Audit $($auditSpec.AuditName) does not exist on $destinstance. Skipping $auditSpecName."
                        Write-Message -Level Warning -Message "Audit $($auditSpec.AuditName) does not exist on $destinstance. Skipping $auditSpecName."
                        $copyAuditSpecStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                    }
                    continue
                }

                if ($destAudits.name -contains $auditSpecName) {
                    if ($force -eq $false) {
                        Write-Message -Level Verbose -Message "Server audit $auditSpecName exists at destination. Use -Force to drop and migrate."

                        $copyAuditSpecStatus.Status = "Skipped"
                        $copyAuditSpecStatus.Notes = "Already exists on destination"
                        $copyAuditSpecStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                        continue
                    } else {
                        if ($Pscmdlet.ShouldProcess($destinstance, "Dropping server audit $auditSpecName and recreating")) {
                            try {
                                Write-Message -Level Verbose -Message "Dropping server audit $auditSpecName"
                                $destServer.ServerAuditSpecifications[$auditSpecName].Drop()
                            } catch {
                                $copyAuditSpecStatus.Status = "Failed"
                                $copyAuditSpecStatus.Notes = (Get-ErrorMessage -Record $_)
                                $copyAuditSpecStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                                Stop-Function -Message "Issue dropping audit spec" -Target $auditSpecName -ErrorRecord $_ -Continue
                            }
                        }
                    }
                }
                if ($Pscmdlet.ShouldProcess($destinstance, "Creating server audit $auditSpecName")) {
                    try {
                        Write-Message -Level Verbose -Message "Copying server audit $auditSpecName"
                        $sql = $auditSpec.Script() | Out-String
                        Write-Message -Level Debug -Message $sql
                        $destServer.Query($sql)

                        $copyAuditSpecStatus.Status = "Successful"
                        $copyAuditSpecStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                    } catch {
                        $copyAuditSpecStatus.Status = "Failed"
                        $copyAuditSpecStatus.Notes = (Get-ErrorMessage -Record $_)
                        $copyAuditSpecStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                        Stop-Function -Message "Issue creating audit spec on destination" -Target $auditSpecName -ErrorRecord $_
                    }
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Copy-SqlAuditSpecification
    }
}

tools\dbatools\functions\Copy-DbaServerTrigger.ps1

function Copy-DbaServerTrigger {
    <#
    .SYNOPSIS
        Copy-DbaServerTrigger migrates server triggers from one SQL Server to another.

    .DESCRIPTION
        By default, all triggers are copied. The -ServerTrigger parameter is auto-populated for command-line completion and can be used to copy only specific triggers.

        If the trigger already exists on the destination, it will be skipped unless -Force is used.

    .PARAMETER Source
        Source SQL Server.You must have sysadmin access and server version must be SQL Server version 2000 or greater.

    .PARAMETER SourceSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Destination
        Destination Sql Server. You must have sysadmin access and server version must be SQL Server version 2000 or greater.

    .PARAMETER DestinationSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER ServerTrigger
        The Server Trigger(s) to process - this list is auto-populated from the server. If unspecified, all Server Triggers will be processed.

    .PARAMETER ExcludeServerTrigger
        The Server Trigger(s) to exclude - this list is auto-populated from the server

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER Force
        Drops and recreates the Trigger if it exists

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Migration
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        Requires: sysadmin access on SQL Servers

    .LINK
        https://dbatools.io/Copy-DbaServerTrigger

    .EXAMPLE
        PS C:\> Copy-DbaServerTrigger -Source sqlserver2014a -Destination sqlcluster

        Copies all server triggers from sqlserver2014a to sqlcluster, using Windows credentials. If triggers with the same name exist on sqlcluster, they will be skipped.

    .EXAMPLE
        PS C:\> Copy-DbaServerTrigger -Source sqlserver2014a -Destination sqlcluster -ServerTrigger tg_noDbDrop -SourceSqlCredential $cred -Force

        Copies a single trigger, the tg_noDbDrop trigger from sqlserver2014a to sqlcluster, using SQL credentials for sqlserver2014a and Windows credentials for sqlcluster. If a trigger with the same name exists on sqlcluster, it will be dropped and recreated because -Force was used.

    .EXAMPLE
        PS C:\> Copy-DbaServerTrigger -Source sqlserver2014a -Destination sqlcluster -WhatIf -Force

        Shows what would happen if the command were executed using force.

    #>
    [CmdletBinding(DefaultParameterSetName = "Default", SupportsShouldProcess)]
    param (
        [parameter(Mandatory)]
        [DbaInstanceParameter]$Source,
        [PSCredential]
        $SourceSqlCredential,
        [parameter(Mandatory)]
        [DbaInstanceParameter[]]$Destination,
        [PSCredential]
        $DestinationSqlCredential,
        [object[]]$ServerTrigger,
        [object[]]$ExcludeServerTrigger,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        try {
            $sourceServer = Connect-SqlInstance -SqlInstance $Source -SqlCredential $SourceSqlCredential -MinimumVersion 9
        } catch {
            Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $Source
            return
        }
        $serverTriggers = $sourceServer.Triggers
    }
    process {
        if (Test-FunctionInterrupt) { return }
        foreach ($destinstance in $Destination) {
            try {
                $destServer = Connect-SqlInstance -SqlInstance $destinstance -SqlCredential $DestinationSqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $destinstance -Continue
            }
            if ($destServer.VersionMajor -lt $sourceServer.VersionMajor) {
                Stop-Function -Message "Migration from version $($destServer.VersionMajor) to version $($sourceServer.VersionMajor) is not supported."
                return
            }
            $destTriggers = $destServer.Triggers

            foreach ($trigger in $serverTriggers) {
                $triggerName = $trigger.Name

                $copyTriggerStatus = [pscustomobject]@{
                    SourceServer      = $sourceServer.Name
                    DestinationServer = $destServer.Name
                    Name              = $triggerName
                    Type              = "Server Trigger"
                    Status            = $null
                    Notes             = $null
                    DateTime          = [DbaDateTime](Get-Date)
                }

                if ($ServerTrigger -and $triggerName -notin $ServerTrigger -or $triggerName -in $ExcludeServerTrigger) {
                    continue
                }

                if ($destTriggers.Name -contains $triggerName) {
                    if ($force -eq $false) {
                        Write-Message -Level Verbose -Message "Server trigger $triggerName exists at destination. Use -Force to drop and migrate."

                        $copyTriggerStatus.Status = "Skipped"
                        $copyTriggerStatus.Notes = "Already exists on destination"
                        $copyTriggerStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                        continue
                    } else {
                        if ($Pscmdlet.ShouldProcess($destinstance, "Dropping server trigger $triggerName and recreating")) {
                            try {
                                Write-Message -Level Verbose -Message "Dropping server trigger $triggerName"
                                $destServer.Triggers[$triggerName].Drop()
                            } catch {
                                $copyTriggerStatus.Status = "Failed"
                                $copyTriggerStatus.Notes = (Get-ErrorMessage -Record $_)
                                $copyTriggerStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                                Stop-Function -Message "Issue dropping trigger on destination" -Target $triggerName -ErrorRecord $_ -Continue
                            }
                        }
                    }
                }

                if ($Pscmdlet.ShouldProcess($destinstance, "Creating server trigger $triggerName")) {
                    try {
                        Write-Message -Level Verbose -Message "Copying server trigger $triggerName"
                        $sql = $trigger.Script() | Out-String
                        $sql = $sql -replace "CREATE TRIGGER", "`nGO`nCREATE TRIGGER"
                        $sql = $sql -replace "ENABLE TRIGGER", "`nGO`nENABLE TRIGGER"
                        Write-Message -Level Debug -Message $sql

                        foreach ($query in ($sql -split '\nGO\b')) {
                            $destServer.Query($query) | Out-Null
                        }

                        $copyTriggerStatus.Status = "Successful"
                        $copyTriggerStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                    } catch {
                        $copyTriggerStatus.Status = "Failed"
                        $copyTriggerStatus.Notes = (Get-ErrorMessage -Record $_)
                        $copyTriggerStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                        Stop-Function -Message "Issue creating trigger on destination" -Target $triggerName -ErrorRecord $_
                    }
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Copy-SqlServerTrigger
    }
}

tools\dbatools\bin\XEtemplates\Database Health 2014.xml

<event_sessions xmlns="http://schemas.microsoft.com/sqlserver/2008/07/extendedeventsconfig">
   <event_session name="Database Health 2014" maxMemory="4" eventRetentionMode="allowMultipleEventLoss" trackCausality="true" dispatchLatency="30" maxEventSize="0" memoryPartitionMode="perNode">
	<templateCategory>
      <!-- _locID_text="templateCategory" _locComment = "" -->Performance Store</templateCategory>
    <templateName>
      <!-- _locID_text = "templateName" _locComment = "" -->Database Health 2014</templateName>
    <templateDescription>
      <!-- _locID_text = "templateDescription" _locComment = "" -->Similar to system_health but for SQL Server 2014 databases by Ola Hallengren. This Extended Event captures most of the valuable data for troubleshooting such as deadlocks, blocking processes, slow statements, errors, file size changes, info for tempdb troubleshooting etc. To capture blocking processes, configure blocked threshold (Set-DbaSpConfigure -SqlInstance sql2017 -ConfigName BlockedProcessThreshold -Value 5)</templateDescription>
            <event package="sqlos" name="wait_completed">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="client_hostname" />
         <action package="sqlserver" name="client_pid" />
         <action package="sqlserver" name="database_id" />
         <action package="sqlserver" name="database_name" />
         <action package="sqlserver" name="nt_username" />
         <action package="sqlserver" name="plan_handle" />
         <action package="sqlserver" name="query_hash_signed" />
         <action package="sqlserver" name="query_plan_hash_signed" />
         <action package="sqlserver" name="request_id" />
         <action package="sqlserver" name="session_id" />
         <action package="sqlserver" name="session_resource_group_id" />
         <action package="sqlserver" name="transaction_id" />
         <action package="sqlserver" name="tsql_frame" />
         <action package="sqlserver" name="username" />
         <predicate>
            <and>
               <and>
                  <and>
                     <and>
                        <and>
                           <and>
                              <leaf>
                                 <comparator name="equal_boolean" package="package0" />
                                 <global name="is_system" package="sqlserver" />
                                 <value>false</value>
                              </leaf>
                              <leaf>
                                 <comparator name="greater_than_equal_uint64" package="package0" />
                                 <event name="wait_completed" package="sqlos" field="duration" />
                                 <value>5000</value>
                              </leaf>
                           </and>
                           <leaf>
                              <comparator name="not_equal_uint64" package="package0" />
                              <event name="wait_completed" package="sqlos" field="wait_type" />
                              <value>233</value>
                           </leaf>
                        </and>
                        <leaf>
                           <comparator name="not_equal_uint64" package="package0" />
                           <event name="wait_completed" package="sqlos" field="wait_type" />
                           <value>231</value>
                        </leaf>
                     </and>
                     <leaf>
                        <comparator name="not_equal_uint64" package="package0" />
                        <event name="wait_completed" package="sqlos" field="wait_type" />
                        <value>395</value>
                     </leaf>
                  </and>
                  <leaf>
                     <comparator name="not_equal_uint64" package="package0" />
                     <event name="wait_completed" package="sqlos" field="wait_type" />
                     <value>666</value>
                  </leaf>
               </and>
               <leaf>
                  <comparator name="not_equal_uint64" package="package0" />
                  <event name="wait_completed" package="sqlos" field="wait_type" />
                  <value>766</value>
               </leaf>
            </and>
         </predicate>
      </event>
      <event package="sqlos" name="wait_info_external">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="client_hostname" />
         <action package="sqlserver" name="client_pid" />
         <action package="sqlserver" name="database_id" />
         <action package="sqlserver" name="database_name" />
         <action package="sqlserver" name="nt_username" />
         <action package="sqlserver" name="plan_handle" />
         <action package="sqlserver" name="query_hash_signed" />
         <action package="sqlserver" name="query_plan_hash_signed" />
         <action package="sqlserver" name="request_id" />
         <action package="sqlserver" name="session_id" />
         <action package="sqlserver" name="session_resource_group_id" />
         <action package="sqlserver" name="transaction_id" />
         <action package="sqlserver" name="tsql_frame" />
         <action package="sqlserver" name="username" />
         <predicate>
            <and>
               <and>
                  <leaf>
                     <comparator name="equal_uint64" package="package0" />
                     <event name="wait_info_external" package="sqlos" field="opcode" />
                     <value>1</value>
                  </leaf>
                  <leaf>
                     <comparator name="equal_boolean" package="package0" />
                     <global name="is_system" package="sqlserver" />
                     <value>false</value>
                  </leaf>
               </and>
               <leaf>
                  <comparator name="greater_than_equal_uint64" package="package0" />
                  <event name="wait_info_external" package="sqlos" field="duration" />
                  <value>5000</value>
               </leaf>
            </and>
         </predicate>
      </event>
      <event package="sqlserver" name="blocked_process_report" />
      <event package="sqlserver" name="database_file_size_change">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="client_hostname" />
         <action package="sqlserver" name="client_pid" />
         <action package="sqlserver" name="nt_username" />
         <action package="sqlserver" name="plan_handle" />
         <action package="sqlserver" name="request_id" />
         <action package="sqlserver" name="session_id" />
         <action package="sqlserver" name="session_resource_group_id" />
         <action package="sqlserver" name="transaction_id" />
         <action package="sqlserver" name="username" />
         <parameter name="collect_database_name" value="1" />
      </event>
      <event package="sqlserver" name="error_reported">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="client_hostname" />
         <action package="sqlserver" name="client_pid" />
         <action package="sqlserver" name="database_id" />
         <action package="sqlserver" name="database_name" />
         <action package="sqlserver" name="nt_username" />
         <action package="sqlserver" name="plan_handle" />
         <action package="sqlserver" name="request_id" />
         <action package="sqlserver" name="session_id" />
         <action package="sqlserver" name="session_resource_group_id" />
         <action package="sqlserver" name="transaction_id" />
         <action package="sqlserver" name="tsql_frame" />
         <action package="sqlserver" name="username" />
         <predicate>
            <leaf>
               <comparator name="greater_than_int64" package="package0" />
               <event name="error_reported" package="sqlserver" field="severity" />
               <value>10</value>
            </leaf>
         </predicate>
      </event>
      <event package="sqlserver" name="module_end">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="client_hostname" />
         <action package="sqlserver" name="client_pid" />
         <action package="sqlserver" name="database_id" />
         <action package="sqlserver" name="database_name" />
         <action package="sqlserver" name="nt_username" />
         <action package="sqlserver" name="plan_handle" />
         <action package="sqlserver" name="request_id" />
         <action package="sqlserver" name="session_id" />
         <action package="sqlserver" name="session_resource_group_id" />
         <action package="sqlserver" name="transaction_id" />
         <action package="sqlserver" name="tsql_frame" />
         <action package="sqlserver" name="username" />
         <predicate>
            <and>
               <leaf>
                  <comparator name="equal_boolean" package="package0" />
                  <global name="is_system" package="sqlserver" />
                  <value>false</value>
               </leaf>
               <leaf>
                  <comparator name="greater_than_equal_uint64" package="package0" />
                  <event name="module_end" package="sqlserver" field="duration" />
                  <value>5000000</value>
               </leaf>
            </and>
         </predicate>
      </event>
      <event package="sqlserver" name="rpc_completed">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="client_hostname" />
         <action package="sqlserver" name="client_pid" />
         <action package="sqlserver" name="database_id" />
         <action package="sqlserver" name="database_name" />
         <action package="sqlserver" name="nt_username" />
         <action package="sqlserver" name="request_id" />
         <action package="sqlserver" name="session_id" />
         <action package="sqlserver" name="session_resource_group_id" />
         <action package="sqlserver" name="transaction_id" />
         <action package="sqlserver" name="username" />
         <predicate>
            <and>
               <leaf>
                  <comparator name="equal_boolean" package="package0" />
                  <global name="is_system" package="sqlserver" />
                  <value>false</value>
               </leaf>
               <or>
                  <leaf>
                     <comparator name="greater_than_equal_uint64" package="package0" />
                     <event name="rpc_completed" package="sqlserver" field="duration" />
                     <value>5000000</value>
                  </leaf>
                  <leaf>
                     <comparator name="not_equal_uint64" package="package0" />
                     <event name="rpc_completed" package="sqlserver" field="result" />
                     <value>0</value>
                  </leaf>
               </or>
            </and>
         </predicate>
      </event>
      <event package="sqlserver" name="sql_batch_completed">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="client_hostname" />
         <action package="sqlserver" name="client_pid" />
         <action package="sqlserver" name="database_id" />
         <action package="sqlserver" name="database_name" />
         <action package="sqlserver" name="nt_username" />
         <action package="sqlserver" name="request_id" />
         <action package="sqlserver" name="session_id" />
         <action package="sqlserver" name="session_resource_group_id" />
         <action package="sqlserver" name="transaction_id" />
         <action package="sqlserver" name="username" />
         <parameter name="collect_batch_text" value="1" />
         <predicate>
            <and>
               <leaf>
                  <comparator name="equal_boolean" package="package0" />
                  <global name="is_system" package="sqlserver" />
                  <value>false</value>
               </leaf>
               <or>
                  <leaf>
                     <comparator name="greater_than_equal_uint64" package="package0" />
                     <event name="sql_batch_completed" package="sqlserver" field="duration" />
                     <value>5000000</value>
                  </leaf>
                  <leaf>
                     <comparator name="not_equal_uint64" package="package0" />
                     <event name="sql_batch_completed" package="sqlserver" field="result" />
                     <value>0</value>
                  </leaf>
               </or>
            </and>
         </predicate>
      </event>
      <event package="sqlserver" name="xml_deadlock_report">
         <action package="sqlserver" name="database_name" />
      </event>
      <target package="package0" name="event_file">
         <parameter name="filename" value="Database Health 2014" />
         <parameter name="max_file_size" value="5" />
         <parameter name="max_rollover_files" value="100" />
      </target>
   </event_session>
</event_sessions>

tools\dbatools\bin\XEtemplates\Database Health 2016 and Above.xml

<event_sessions xmlns="http://schemas.microsoft.com/sqlserver/2008/07/extendedeventsconfig">
   <event_session name="Database Health 2016 and Above" maxMemory="4" eventRetentionMode="allowMultipleEventLoss" trackCausality="true" dispatchLatency="30" maxEventSize="0" memoryPartitionMode="perNode">
      <templateCategory>
      <!-- _locID_text="templateCategory" _locComment = "" -->Performance Store</templateCategory>
    <templateName>
      <!-- _locID_text = "templateName" _locComment = "" -->Database Health 2016 and Above</templateName>
    <templateDescription>
      <!-- _locID_text = "templateDescription" _locComment = "" -->Similar to system_health but for SQL Server 2016+ databases by Ola Hallengren. This Extended Event captures most of the valuable data for troubleshooting such as deadlocks, blocking processes, slow statements, errors, file size changes, info for tempdb troubleshooting etc. To capture blocking processes, configure blocked threshold (Set-DbaSpConfigure -SqlInstance sql2017 -ConfigName BlockedProcessThreshold -Value 5)</templateDescription>
    <event package="sqlos" name="wait_completed">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="client_hostname" />
         <action package="sqlserver" name="client_pid" />
         <action package="sqlserver" name="database_id" />
         <action package="sqlserver" name="database_name" />
         <action package="sqlserver" name="nt_username" />
         <action package="sqlserver" name="plan_handle" />
         <action package="sqlserver" name="query_hash_signed" />
         <action package="sqlserver" name="query_plan_hash_signed" />
         <action package="sqlserver" name="request_id" />
         <action package="sqlserver" name="session_id" />
         <action package="sqlserver" name="session_resource_group_id" />
         <action package="sqlserver" name="transaction_id" />
         <action package="sqlserver" name="tsql_frame" />
         <action package="sqlserver" name="username" />
         <predicate>
            <and>
               <and>
                  <and>
                     <and>
                        <and>
                           <and>
                              <and>
                                 <and>
                                    <leaf>
                                       <comparator name="equal_boolean" package="package0" />
                                       <global name="is_system" package="sqlserver" />
                                       <value>false</value>
                                    </leaf>
                                    <leaf>
                                       <comparator name="greater_than_equal_uint64" package="package0" />
                                       <event name="wait_completed" package="sqlos" field="duration" />
                                       <value>5000</value>
                                    </leaf>
                                 </and>
                                 <leaf>
                                    <comparator name="not_equal_uint64" package="package0" />
                                    <event name="wait_completed" package="sqlos" field="wait_type" />
                                    <value>233</value>
                                 </leaf>
                              </and>
                              <leaf>
                                 <comparator name="not_equal_uint64" package="package0" />
                                 <event name="wait_completed" package="sqlos" field="wait_type" />
                                 <value>231</value>
                              </leaf>
                           </and>
                           <leaf>
                              <comparator name="not_equal_uint64" package="package0" />
                              <event name="wait_completed" package="sqlos" field="wait_type" />
                              <value>395</value>
                           </leaf>
                        </and>
                        <leaf>
                           <comparator name="not_equal_uint64" package="package0" />
                           <event name="wait_completed" package="sqlos" field="wait_type" />
                           <value>666</value>
                        </leaf>
                     </and>
                     <leaf>
                        <comparator name="not_equal_uint64" package="package0" />
                        <event name="wait_completed" package="sqlos" field="wait_type" />
                        <value>766</value>
                     </leaf>
                  </and>
                  <leaf>
                     <comparator name="not_equal_uint64" package="package0" />
                     <event name="wait_completed" package="sqlos" field="wait_type" />
                     <value>1114</value>
                  </leaf>
               </and>
               <leaf>
                  <comparator name="not_equal_uint64" package="package0" />
                  <event name="wait_completed" package="sqlos" field="wait_type" />
                  <value>1013</value>
               </leaf>
            </and>
         </predicate>
      </event>
      <event package="sqlos" name="wait_info_external">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="client_hostname" />
         <action package="sqlserver" name="client_pid" />
         <action package="sqlserver" name="database_id" />
         <action package="sqlserver" name="database_name" />
         <action package="sqlserver" name="nt_username" />
         <action package="sqlserver" name="plan_handle" />
         <action package="sqlserver" name="query_hash_signed" />
         <action package="sqlserver" name="query_plan_hash_signed" />
         <action package="sqlserver" name="request_id" />
         <action package="sqlserver" name="session_id" />
         <action package="sqlserver" name="session_resource_group_id" />
         <action package="sqlserver" name="transaction_id" />
         <action package="sqlserver" name="tsql_frame" />
         <action package="sqlserver" name="username" />
         <predicate>
            <and>
               <and>
                  <leaf>
                     <comparator name="equal_uint64" package="package0" />
                     <event name="wait_info_external" package="sqlos" field="opcode" />
                     <value>1</value>
                  </leaf>
                  <leaf>
                     <comparator name="equal_boolean" package="package0" />
                     <global name="is_system" package="sqlserver" />
                     <value>false</value>
                  </leaf>
               </and>
               <leaf>
                  <comparator name="greater_than_equal_uint64" package="package0" />
                  <event name="wait_info_external" package="sqlos" field="duration" />
                  <value>5000</value>
               </leaf>
            </and>
         </predicate>
      </event>
      <event package="sqlserver" name="blocked_process_report" />
      <event package="sqlserver" name="database_file_size_change">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="client_hostname" />
         <action package="sqlserver" name="client_pid" />
         <action package="sqlserver" name="nt_username" />
         <action package="sqlserver" name="plan_handle" />
         <action package="sqlserver" name="request_id" />
         <action package="sqlserver" name="session_id" />
         <action package="sqlserver" name="session_resource_group_id" />
         <action package="sqlserver" name="transaction_id" />
         <action package="sqlserver" name="username" />
         <parameter name="collect_database_name" value="1" />
      </event>
      <event package="sqlserver" name="error_reported">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="client_hostname" />
         <action package="sqlserver" name="client_pid" />
         <action package="sqlserver" name="database_id" />
         <action package="sqlserver" name="database_name" />
         <action package="sqlserver" name="nt_username" />
         <action package="sqlserver" name="plan_handle" />
         <action package="sqlserver" name="request_id" />
         <action package="sqlserver" name="session_id" />
         <action package="sqlserver" name="session_resource_group_id" />
         <action package="sqlserver" name="transaction_id" />
         <action package="sqlserver" name="tsql_frame" />
         <action package="sqlserver" name="username" />
         <predicate>
            <leaf>
               <comparator name="greater_than_int64" package="package0" />
               <event name="error_reported" package="sqlserver" field="severity" />
               <value>10</value>
            </leaf>
         </predicate>
      </event>
      <event package="sqlserver" name="module_end">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="client_hostname" />
         <action package="sqlserver" name="client_pid" />
         <action package="sqlserver" name="database_id" />
         <action package="sqlserver" name="database_name" />
         <action package="sqlserver" name="nt_username" />
         <action package="sqlserver" name="plan_handle" />
         <action package="sqlserver" name="request_id" />
         <action package="sqlserver" name="session_id" />
         <action package="sqlserver" name="session_resource_group_id" />
         <action package="sqlserver" name="transaction_id" />
         <action package="sqlserver" name="tsql_frame" />
         <action package="sqlserver" name="username" />
         <predicate>
            <and>
               <leaf>
                  <comparator name="equal_boolean" package="package0" />
                  <global name="is_system" package="sqlserver" />
                  <value>false</value>
               </leaf>
               <leaf>
                  <comparator name="greater_than_equal_uint64" package="package0" />
                  <event name="module_end" package="sqlserver" field="duration" />
                  <value>5000000</value>
               </leaf>
            </and>
         </predicate>
      </event>
      <event package="sqlserver" name="rpc_completed">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="client_hostname" />
         <action package="sqlserver" name="client_pid" />
         <action package="sqlserver" name="database_id" />
         <action package="sqlserver" name="database_name" />
         <action package="sqlserver" name="nt_username" />
         <action package="sqlserver" name="request_id" />
         <action package="sqlserver" name="session_id" />
         <action package="sqlserver" name="session_resource_group_id" />
         <action package="sqlserver" name="transaction_id" />
         <action package="sqlserver" name="username" />
         <predicate>
            <and>
               <leaf>
                  <comparator name="equal_boolean" package="package0" />
                  <global name="is_system" package="sqlserver" />
                  <value>false</value>
               </leaf>
               <or>
                  <leaf>
                     <comparator name="greater_than_equal_uint64" package="package0" />
                     <event name="rpc_completed" package="sqlserver" field="duration" />
                     <value>5000000</value>
                  </leaf>
                  <leaf>
                     <comparator name="not_equal_uint64" package="package0" />
                     <event name="rpc_completed" package="sqlserver" field="result" />
                     <value>0</value>
                  </leaf>
               </or>
            </and>
         </predicate>
      </event>
      <event package="sqlserver" name="sql_batch_completed">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="client_hostname" />
         <action package="sqlserver" name="client_pid" />
         <action package="sqlserver" name="database_id" />
         <action package="sqlserver" name="database_name" />
         <action package="sqlserver" name="nt_username" />
         <action package="sqlserver" name="request_id" />
         <action package="sqlserver" name="session_id" />
         <action package="sqlserver" name="session_resource_group_id" />
         <action package="sqlserver" name="transaction_id" />
         <action package="sqlserver" name="username" />
         <parameter name="collect_batch_text" value="1" />
         <predicate>
            <and>
               <leaf>
                  <comparator name="equal_boolean" package="package0" />
                  <global name="is_system" package="sqlserver" />
                  <value>false</value>
               </leaf>
               <or>
                  <leaf>
                     <comparator name="greater_than_equal_uint64" package="package0" />
                     <event name="sql_batch_completed" package="sqlserver" field="duration" />
                     <value>5000000</value>
                  </leaf>
                  <leaf>
                     <comparator name="not_equal_uint64" package="package0" />
                     <event name="sql_batch_completed" package="sqlserver" field="result" />
                     <value>0</value>
                  </leaf>
               </or>
            </and>
         </predicate>
      </event>
      <event package="sqlserver" name="xml_deadlock_report">
         <action package="sqlserver" name="database_name" />
      </event>
      <target package="package0" name="event_file">
         <parameter name="filename" value="Database Health 2016 and Above" />
         <parameter name="max_file_size" value="5" />
         <parameter name="max_rollover_files" value="100" />
      </target>
   </event_session>
</event_sessions>

tools\dbatools\bin\XEtemplates\Deadlock Graphs.xml

<event_sessions xmlns="http://schemas.microsoft.com/sqlserver/2008/07/extendedeventconfig">
   <event_session name="Deadlock Graphs" maxMemory="4" eventRetentionMode="allowSingleEventLoss" trackCausality="false" dispatchLatency="30" maxEventSize="0" memoryPartitionMode="none">
    <templateCategory>
      <!-- _locID_text="templateCategory" _locComment = "" -->Everyday Extended Events</templateCategory>
    <templateName>
      <!-- _locID_text = "templateName" _locComment = "" -->Deadlock Graphs</templateName>
    <templateDescription>
      <!-- _locID_text = "templateDescription" _locComment = "" -->Captures deadlock information. Careful, the Deadlock tab is sneaky!</templateDescription>
      <event package="sqlserver" name="database_xml_deadlock_report">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="client_hostname" />
         <action package="sqlserver" name="database_id" />
         <action package="sqlserver" name="database_name" />
         <action package="sqlserver" name="plan_handle" />
         <action package="sqlserver" name="sql_text" />
      </event>
      <event package="sqlserver" name="xml_deadlock_report">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="client_hostname" />
         <action package="sqlserver" name="database_id" />
         <action package="sqlserver" name="database_name" />
         <action package="sqlserver" name="plan_handle" />
         <action package="sqlserver" name="sql_text" />
      </event>
      <target package="package0" name="event_file">
         <parameter name="filename" value="capture_deadlock_graphs" />
      </target>
   </event_session>
</event_sessions>

tools\dbatools\bin\XEtemplates\Default Profiler Trace.xml

<event_sessions xmlns="http://schemas.microsoft.com/sqlserver/2008/07/extendedeventconfig">
   <event_session name="Default Profiler Trace" maxMemory="4" eventRetentionMode="allowSingleEventLoss" trackCausality="false" dispatchLatency="1" maxEventSize="0" memoryPartitionMode="none">
      <templateCategory><!-- _locID_text="templateCategory" _locComment = "" -->System Monitoring</templateCategory>
      <templateName><!-- _locID_text = "templateName" _locComment = "" -->Default Profiler Trace</templateName>
      <templateDescription><!-- _locID_text = "templateDescription" _locComment = "" -->The default profiler trace, converted using sp_SQLskills_ConvertTraceToExtendedEvents.</templateDescription>
      <event package="sqlserver" name="existing_connection">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="client_pid" />
         <action package="sqlserver" name="nt_username" />
         <action package="sqlserver" name="server_principal_name" />
         <action package="sqlserver" name="session_id" />
      </event>
      <event package="sqlserver" name="login">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="client_pid" />
         <action package="sqlserver" name="nt_username" />
         <action package="sqlserver" name="server_principal_name" />
         <action package="sqlserver" name="session_id" />
      </event>
      <event package="sqlserver" name="logout">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="client_pid" />
         <action package="sqlserver" name="nt_username" />
         <action package="sqlserver" name="server_principal_name" />
         <action package="sqlserver" name="session_id" />
      </event>
      <event package="sqlserver" name="rpc_completed">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="client_pid" />
         <action package="sqlserver" name="nt_username" />
         <action package="sqlserver" name="server_principal_name" />
         <action package="sqlserver" name="session_id" />
      </event>
      <event package="sqlserver" name="sql_batch_completed">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="client_pid" />
         <action package="sqlserver" name="nt_username" />
         <action package="sqlserver" name="server_principal_name" />
         <action package="sqlserver" name="session_id" />
      </event>
      <event package="sqlserver" name="sql_batch_starting">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="client_pid" />
         <action package="sqlserver" name="nt_username" />
         <action package="sqlserver" name="server_principal_name" />
         <action package="sqlserver" name="session_id" />
      </event>
      <target package="package0" name="ring_buffer" />
   </event_session>
</event_sessions>

tools\dbatools\bin\XEtemplates\Query Detail Tracking.xml

<event_sessions xmlns="http://schemas.microsoft.com/sqlserver/2008/07/extendedeventconfig">
  <event_session name="Query Detail Tracking" maxMemory="4" eventRetentionMode="allowSingleEventLoss" trackCausality="true" dispatchLatency="30" maxEventSize="0" memoryPartitionMode="none">
    <templateCategory>
      <!-- _locID_text="templateCategory" _locComment = "" -->Query Execution</templateCategory>
    <templateName>
      <!-- _locID_text = "templateName" _locComment = "" -->Query Detail Tracking</templateName>
    <templateDescription>
      <!-- _locID_text = "templateDescription" _locComment = "" -->Collects detailed statement and error information. You can use this template to track each statement has executed on your system as a result of query batches or stored procedures and then track errors back to the specific statement that caused them. This template also collects the query hash and query plan hash for every statement it tracks. All statement events are collected in this session so collection size may be very large. To reduce the collection size consider using the Query Detail Sampling template, which already includes a filter.</templateDescription>
    <event package="sqlserver" name="error_reported">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="query_hash" />
      <action package="sqlserver" name="session_id" />
      <predicate>
        <and>
          <leaf>
            <comparator name="greater_than_uint64" package="package0"></comparator>
            <global name="database_id" package="sqlserver"></global>
            <value>4</value>
          </leaf>
          <leaf>
            <comparator name="equal_boolean" package="package0"></comparator>
            <global name="is_system" package="sqlserver"></global>
            <value>false</value>
          </leaf>
        </and>
      </predicate>
    </event>
    <event package="sqlserver" name="module_end">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="query_hash" />
      <action package="sqlserver" name="session_id" />
      <parameter name="collect_statement" value="1" />
      <predicate>
        <and>
          <leaf>
            <comparator name="greater_than_uint64" package="package0"></comparator>
            <global name="database_id" package="sqlserver"></global>
            <value>4</value>
          </leaf>
          <leaf>
            <comparator name="equal_boolean" package="package0"></comparator>
            <global name="is_system" package="sqlserver"></global>
            <value>false</value>
          </leaf>
        </and>
      </predicate>
    </event>
    <event package="sqlserver" name="rpc_completed">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="query_hash" />
      <action package="sqlserver" name="session_id" />
      <predicate>
        <and>
          <leaf>
            <comparator name="greater_than_uint64" package="package0"></comparator>
            <global name="database_id" package="sqlserver"></global>
            <value>4</value>
          </leaf>
          <leaf>
            <comparator name="equal_boolean" package="package0"></comparator>
            <global name="is_system" package="sqlserver"></global>
            <value>false</value>
          </leaf>
        </and>
      </predicate>
    </event>
    <event package="sqlserver" name="sp_statement_completed">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="query_hash" />
      <action package="sqlserver" name="query_plan_hash" />
      <action package="sqlserver" name="session_id" />
      <parameter name="collect_object_name" value="1" />
      <predicate>
        <and>
          <leaf>
            <comparator name="greater_than_uint64" package="package0"></comparator>
            <global name="database_id" package="sqlserver"></global>
            <value>4</value>
          </leaf>
          <leaf>
            <comparator name="equal_boolean" package="package0"></comparator>
            <global name="is_system" package="sqlserver"></global>
            <value>false</value>
          </leaf>
        </and>
      </predicate>
    </event>
    <event package="sqlserver" name="sql_batch_completed">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="query_hash" />
      <action package="sqlserver" name="session_id" />
      <predicate>
        <and>
          <leaf>
            <comparator name="greater_than_uint64" package="package0"></comparator>
            <global name="database_id" package="sqlserver"></global>
            <value>4</value>
          </leaf>
          <leaf>
            <comparator name="equal_boolean" package="package0"></comparator>
            <global name="is_system" package="sqlserver"></global>
            <value>false</value>
          </leaf>
        </and>
      </predicate>
    </event>
    <event package="sqlserver" name="sql_statement_completed">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="query_hash" />
      <action package="sqlserver" name="query_plan_hash" />
      <action package="sqlserver" name="session_id" />
      <predicate>
        <and>
          <leaf>
            <comparator name="greater_than_uint64" package="package0"></comparator>
            <global name="database_id" package="sqlserver"></global>
            <value>4</value>
          </leaf>
          <leaf>
            <comparator name="equal_boolean" package="package0"></comparator>
            <global name="is_system" package="sqlserver"></global>
            <value>false</value>
          </leaf>
        </and>
      </predicate>
    </event>
    <target package="package0" name="ring_buffer" />
  </event_session>
</event_sessions>

tools\dbatools\bin\XEtemplates\Query Timeouts.xml

<event_sessions xmlns="http://schemas.microsoft.com/sqlserver/2008/07/extendedeventconfig">
   <event_session name="Query Timeouts" maxMemory="4" eventRetentionMode="allowSingleEventLoss" trackCausality="true" dispatchLatency="5" maxEventSize="0" memoryPartitionMode="none">
    <templateCategory>
      <!-- _locID_text="templateCategory" _locComment = "" -->Query Execution</templateCategory>
    <templateName>
      <!-- _locID_text = "templateName" _locComment = "" -->Query Timeouts</templateName>
    <templateDescription>
      <!-- _locID_text = "templateDescription" _locComment = "" -->Tracks query timeouts.</templateDescription>
      <event package="sqlserver" name="sql_statement_completed">
         <action package="sqlserver" name="query_hash" />
         <action package="sqlserver" name="session_id" />
         <action package="sqlserver" name="tsql_stack" />
      </event>
      <event package="sqlserver" name="sql_statement_starting">
         <action package="sqlserver" name="query_hash" />
         <action package="sqlserver" name="session_id" />
         <action package="sqlserver" name="tsql_stack" />
      </event>
      <target package="package0" name="pair_matching">
         <parameter name="begin_event" value="sqlserver.sql_statement_starting" />
         <parameter name="begin_matching_actions" value="sqlserver.session_id, sqlserver.tsql_stack" />
         <parameter name="end_event" value="sqlserver.sql_statement_completed" />
         <parameter name="end_matching_actions" value="sqlserver.session_id, sqlserver.tsql_stack" />
         <parameter name="respond_to_memory_pressure" value="0" />
      </target>
   </event_session>
</event_sessions>

tools\dbatools\bin\XEtemplates\Query Wait Statistics Detail.xml

<event_sessions xmlns="http://schemas.microsoft.com/sqlserver/2008/07/extendedeventconfig">
  <event_session name="Query Wait Statistics Detail" maxMemory="4" eventRetentionMode="allowSingleEventLoss" trackCausality="true" dispatchLatency="30" maxEventSize="0" memoryPartitionMode="none">
    <templateCategory>
      <!-- _locID_text="templateCategory" _locComment = "" -->Query Execution</templateCategory>
    <templateName>
      <!-- _locID_text = "templateName" _locComment = "" -->Query Wait Statistics Detail</templateName>
    <templateDescription>
      <!-- _locID_text = "templateDescription" _locComment = "" -->Tracks internal and external wait statistics for individual query statements, batches and RPCs. This template also collects the query hash and query plan hash for every statement it tracks. Events are only collected from 20% of the active sessions on the server at any given time. You can change the sampling rate by modifying the filter for the event session.</templateDescription>
    <event package="sqlos" name="wait_info">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="query_hash" />
      <action package="sqlserver" name="query_plan_hash" />
      <action package="sqlserver" name="session_id" />
      <predicate>
        <and>
          <and>
            <leaf>
              <comparator name="divides_by_uint64" package="package0"></comparator>
              <global name="session_id" package="sqlserver"></global>
              <value>5</value>
            </leaf>
            <leaf>
              <comparator name="greater_than_uint64" package="package0"></comparator>
              <global name="database_id" package="sqlserver"></global>
              <value>4</value>
            </leaf>
          </and>
          <leaf>
            <comparator name="equal_boolean" package="package0"></comparator>
            <global name="is_system" package="sqlserver"></global>
            <value>false</value>
          </leaf>
        </and>
      </predicate>
    </event>
    <event package="sqlos" name="wait_info_external">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="query_hash" />
      <action package="sqlserver" name="query_plan_hash" />
      <action package="sqlserver" name="session_id" />
      <predicate>
        <and>
          <and>
            <leaf>
              <comparator name="divides_by_uint64" package="package0"></comparator>
              <global name="session_id" package="sqlserver"></global>
              <value>5</value>
            </leaf>
            <leaf>
              <comparator name="greater_than_uint64" package="package0"></comparator>
              <global name="database_id" package="sqlserver"></global>
              <value>4</value>
            </leaf>
          </and>
          <leaf>
            <comparator name="equal_boolean" package="package0"></comparator>
            <global name="is_system" package="sqlserver"></global>
            <value>false</value>
          </leaf>
        </and>
      </predicate>
    </event>
    <event package="sqlserver" name="rpc_completed">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="query_hash" />
      <action package="sqlserver" name="session_id" />
      <predicate>
        <and>
          <and>
            <leaf>
              <comparator name="divides_by_uint64" package="package0"></comparator>
              <global name="session_id" package="sqlserver"></global>
              <value>5</value>
            </leaf>
            <leaf>
              <comparator name="greater_than_uint64" package="package0"></comparator>
              <global name="database_id" package="sqlserver"></global>
              <value>4</value>
            </leaf>
          </and>
          <leaf>
            <comparator name="equal_boolean" package="package0"></comparator>
            <global name="is_system" package="sqlserver"></global>
            <value>false</value>
          </leaf>
        </and>
      </predicate>
    </event>
    <event package="sqlserver" name="rpc_starting">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="query_hash" />
      <action package="sqlserver" name="session_id" />
      <predicate>
        <and>
          <and>
            <leaf>
              <comparator name="divides_by_uint64" package="package0"></comparator>
              <global name="session_id" package="sqlserver"></global>
              <value>5</value>
            </leaf>
            <leaf>
              <comparator name="greater_than_uint64" package="package0"></comparator>
              <global name="database_id" package="sqlserver"></global>
              <value>4</value>
            </leaf>
          </and>
          <leaf>
            <comparator name="equal_boolean" package="package0"></comparator>
            <global name="is_system" package="sqlserver"></global>
            <value>false</value>
          </leaf>
        </and>
      </predicate>
    </event>
    <event package="sqlserver" name="sp_statement_completed">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="query_hash" />
      <action package="sqlserver" name="query_plan_hash" />
      <action package="sqlserver" name="session_id" />
      <parameter name="collect_object_name" value="1" />
      <parameter name="collect_statement" value="1" />
      <predicate>
        <and>
          <and>
            <leaf>
              <comparator name="divides_by_uint64" package="package0"></comparator>
              <global name="session_id" package="sqlserver"></global>
              <value>5</value>
            </leaf>
            <leaf>
              <comparator name="greater_than_uint64" package="package0"></comparator>
              <global name="database_id" package="sqlserver"></global>
              <value>4</value>
            </leaf>
          </and>
          <leaf>
            <comparator name="equal_boolean" package="package0"></comparator>
            <global name="is_system" package="sqlserver"></global>
            <value>false</value>
          </leaf>
        </and>
      </predicate>
    </event>
    <event package="sqlserver" name="sp_statement_starting">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="query_hash" />
      <action package="sqlserver" name="query_plan_hash" />
      <action package="sqlserver" name="session_id" />
      <predicate>
        <and>
          <and>
            <leaf>
              <comparator name="divides_by_uint64" package="package0"></comparator>
              <global name="session_id" package="sqlserver"></global>
              <value>5</value>
            </leaf>
            <leaf>
              <comparator name="greater_than_uint64" package="package0"></comparator>
              <global name="database_id" package="sqlserver"></global>
              <value>4</value>
            </leaf>
          </and>
          <leaf>
            <comparator name="equal_boolean" package="package0"></comparator>
            <global name="is_system" package="sqlserver"></global>
            <value>false</value>
          </leaf>
        </and>
      </predicate>
    </event>
    <event package="sqlserver" name="sql_batch_completed">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="query_hash" />
      <action package="sqlserver" name="session_id" />
      <predicate>
        <and>
          <and>
            <leaf>
              <comparator name="divides_by_uint64" package="package0"></comparator>
              <global name="session_id" package="sqlserver"></global>
              <value>5</value>
            </leaf>
            <leaf>
              <comparator name="greater_than_uint64" package="package0"></comparator>
              <global name="database_id" package="sqlserver"></global>
              <value>4</value>
            </leaf>
          </and>
          <leaf>
            <comparator name="equal_boolean" package="package0"></comparator>
            <global name="is_system" package="sqlserver"></global>
            <value>false</value>
          </leaf>
        </and>
      </predicate>
    </event>
    <event package="sqlserver" name="sql_batch_starting">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="query_hash" />
      <action package="sqlserver" name="session_id" />
      <predicate>
        <and>
          <and>
            <leaf>
              <comparator name="divides_by_uint64" package="package0"></comparator>
              <global name="session_id" package="sqlserver"></global>
              <value>5</value>
            </leaf>
            <leaf>
              <comparator name="greater_than_uint64" package="package0"></comparator>
              <global name="database_id" package="sqlserver"></global>
              <value>4</value>
            </leaf>
          </and>
          <leaf>
            <comparator name="equal_boolean" package="package0"></comparator>
            <global name="is_system" package="sqlserver"></global>
            <value>false</value>
          </leaf>
        </and>
      </predicate>
    </event>
    <event package="sqlserver" name="sql_statement_completed">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="query_hash" />
      <action package="sqlserver" name="query_plan_hash" />
      <action package="sqlserver" name="session_id" />
      <predicate>
        <and>
          <and>
            <leaf>
              <comparator name="divides_by_uint64" package="package0"></comparator>
              <global name="session_id" package="sqlserver"></global>
              <value>5</value>
            </leaf>
            <leaf>
              <comparator name="greater_than_uint64" package="package0"></comparator>
              <global name="database_id" package="sqlserver"></global>
              <value>4</value>
            </leaf>
          </and>
          <leaf>
            <comparator name="equal_boolean" package="package0"></comparator>
            <global name="is_system" package="sqlserver"></global>
            <value>false</value>
          </leaf>
        </and>
      </predicate>
    </event>
    <event package="sqlserver" name="sql_statement_starting">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="query_hash" />
      <action package="sqlserver" name="query_plan_hash" />
      <action package="sqlserver" name="session_id" />
      <predicate>
        <and>
          <and>
            <leaf>
              <comparator name="divides_by_uint64" package="package0"></comparator>
              <global name="session_id" package="sqlserver"></global>
              <value>5</value>
            </leaf>
            <leaf>
              <comparator name="greater_than_uint64" package="package0"></comparator>
              <global name="database_id" package="sqlserver"></global>
              <value>4</value>
            </leaf>
          </and>
          <leaf>
            <comparator name="equal_boolean" package="package0"></comparator>
            <global name="is_system" package="sqlserver"></global>
            <value>false</value>
          </leaf>
        </and>
      </predicate>
    </event>
    <target package="package0" name="event_file">
      <parameter name="filename" value="query_wait_analysis" />
    </target>
  </event_session>
</event_sessions>

tools\dbatools\bin\XEtemplates\Stored Procedure Parameters.xml

<event_sessions xmlns="http://schemas.microsoft.com/sqlserver/2008/07/extendedeventconfig">
   <event_session name="Stored Procedure Parameters" maxMemory="4" eventRetentionMode="allowSingleEventLoss" trackCausality="false" dispatchLatency="30" maxEventSize="0" memoryPartitionMode="none">
    <templateCategory>
      <!-- _locID_text="templateCategory" _locComment = "" -->Everyday Extended Events</templateCategory>
    <templateName>
      <!-- _locID_text = "templateName" _locComment = "" -->Stored Procedure Parameters</templateName>
    <templateDescription>
      <!-- _locID_text = "templateDescription" _locComment = "" -->Captures what parameters were used when a stored procedure was executed.</templateDescription>
      <event package="sqlserver" name="rpc_completed">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="client_hostname" />
         <action package="sqlserver" name="database_id" />
         <action package="sqlserver" name="database_name" />
         <action package="sqlserver" name="query_hash" />
         <action package="sqlserver" name="query_plan_hash" />
         <action package="sqlserver" name="sql_text" />
         <parameter name="collect_output_parameters" value="1" />
         <parameter name="collect_statement" value="1" />
         <predicate>
            <leaf>
               <comparator name="greater_than_uint64" package="package0" />
               <global name="database_id" package="sqlserver" />
               <value>4</value>
            </leaf>
         </predicate>
      </event>
      <event package="sqlserver" name="sql_batch_completed">
         <action package="sqlserver" name="client_app_name" />
         <action package="sqlserver" name="client_hostname" />
         <action package="sqlserver" name="database_id" />
         <action package="sqlserver" name="database_name" />
         <action package="sqlserver" name="query_hash" />
         <action package="sqlserver" name="query_plan_hash" />
         <action package="sqlserver" name="sql_text" />
         <predicate>
            <leaf>
               <comparator name="greater_than_uint64" package="package0" />
               <global name="database_id" package="sqlserver" />
               <value>4</value>
            </leaf>
         </predicate>
      </event>
      <target package="package0" name="event_file">
         <parameter name="filename" value="capture_parameters" />
         <parameter name="max_rollover_files" value="0" />
      </target>
   </event_session>
</event_sessions>

tools\dbatools\changelog.md

# Changelog
All notable changes to this project will be documented in this file.

The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
    and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).

## [0.9.711] - 2018-12-7
### Added
* Multi-threading to Update-DbaInstance
* System db export capabilities to Export-DbaDacPackage

### Fixed
* Ag replica now works when run outside of New-DbaAvailabilityGroup

## [0.9.710] - 2018-12-5
### Fixed
* Start-DbaMigration xplat support

## [0.9.709] - 2018-12-4
### Fixed
* Invoke-DbaAgFailover try/catch wrap to make errors pretty.
* Renamed Set-DbaJobOwner to Set-DbaAgentJobOwner
* Failed logic in Remove-DbaOrphanUser
* Removed ability to specify both KeepDays and Database from Remove-DbaDbBackupRestoreHistory

# Added
* VSCode default settings
* Pipe support in Test-DbaDbOwner

## [0.9.708] - 2018-12-4
### Fixed
* Sync AG bug having to do with read-only dbs

# Added
* Update-DbaInstance final touches

## [0.9.707] - 2018-12-3
### Fixed
* Explicit export of cmdlet module members (fixes older OS/PS issues)

## [0.9.705] - 2018-12-3
### Fixed
* Docker support for AGs

## [0.9.704] - 2018-12-3
### Fixed
* Issue where the dll was repeatedly copied in Windows
* Command exports

## [0.9.703] - 2018-12-3
### Added
* Faster import by uisng zip instead of big ol' ps1

## [0.9.702] - 2018-12-2
### Fixed
* Core support for Copy-DbaDbDatatable, Write-DbaDataTable,
* Parameter names for Copy-DbaDbQueryStoreOption

### Added
* Core support for Import-DbaCsv

## [0.9.700] - 2018-12-1
### Added
* For real true xplat including library and configs 🎉🎉🎉🎉🎉
* Added Update-DbaInstance 🎉🎉🎉🎉🎉

## [0.9.538] - 2018-11-30

### Fixed
* ComputerName resolution for fqdn in Connect-*Instance
* Stop-Function -Continue bug in Set-DbaPrivilege

## [0.9.537] - 2018-11-29
### Added
* Invoke-DbaDbccFreeCache
* Get-DbaDbccUserOption
* Added PolyBase support to Get-DbaService

## [0.9.535] - 2018-11-29
### Fixed
- Backup recoveryfork bug
- Standardized output for Copy command notes
- New-DbaAgentJobStep issue with server / SubSystemServer

### Added
* Get-DbaDbccHelp
* Get-DbaDbccMemoryStatus
* Get-DbaDbccProcCache

## [0.9.534] - 2018-11-29
### Fixed
- Removed mandatory=$false on parameters because it's implied

### Added
* Get-DbaAgentServer
* Set-DbaAgentServer
* Path parameter to audit copies


## [0.9.533] - 2018-11-27
### Fixed
- Removed mandatory=$false on parameters because it's implied

### Added
- Extra include and exclude options to `Sync-DbaAvailabilityGroup`
- Extra column parameters to `Import-DbaCsv`

## [0.9.532] - 2018-11-26
### Fixed
- Publish-DbaDacpackage param issues introduced by core fixes
- Resolve-DbaNetworkName resolution issue introduced by core fixes
- Some long-standing `Get-DbaBackupHistory -Force` problems were resolved

### Added
- Added VS Code recommendations

## [0.9.531] - 2018-11-24
### Added
- Support for Core and Certs
- Solution file upgraded to Core combination and VS 2017

## [0.9.531] - 2018-11-24
### Added
- Support for Core and Certs
- Solution file upgraded to Core combination and VS 2017

## [0.9.530] - 2018-11-24
### Fixed
- Fixed non-Windows imports. "Fixed" used loosely - disabled configuration to speed up import. Xplat still not fully delivered.

### Added
- Seeding support to Add-DbaAgDatabase
- More integration tests!
- Category and Database filters to Get-DbaAgentJob

## [0.9.525] - 2018-11-23
### Added
- CROSS PLATFORM SUPPORT INCLUDING MACOS AND LINUX 🎉

![image](https://user-images.githubusercontent.com/8278033/48960127-ac3c3980-ef6a-11e8-90ca-1e8e56df8ee0.png)

## [0.9.524] - 2018-11-23
### Added
- $script:core for easy core detection in functions

### Fixed
- Resolve-Path added to core import routine

## [0.9.523] - 2018-11-23
### Added
- Support for Dacfx for core 🎉

### Fixed
- Weird thing in Core where a string comparison didn't work so it tried to copy dbatools.dll onto itself
- Get-DbaDbFile now works for CS collation

## [0.9.522] - 2018-11-23
### Added
- Support for PS Core on Windows 🎉
- SMO core DLLs from the SqlServer module

### Fixed
- AG versioning bugs

## [0.9.521] - 2018-11-22
### Added
- This changelog.md! 🎉

### Removed
- Extra DLLs that did not seem necessary

### Changed
- Updated Glen Berry's scripts


## changelog background and additional info

### Types of changes
* Added for new features.
* Changed for changes in existing functionality.
* Deprecated for soon-to-be removed features.
* Removed for now removed features.
* Fixed for any bug fixes.
* Security in case of vulnerabilities.

### Guiding Principles
* Changelogs are for humans, not machines.
* There should be an entry for every single version.
* The same types of changes should be grouped.
* Versions and sections should be linkable.
* The latest version comes first.
* The release date of each version is displayed.
* Mention whether you follow Semantic Versioning.

tools\dbatools\contributing.md

Here, we'll help you understand how to contribute to the project, and talk about fun stuff like styles and guidelines.
# Contributing
Let's sum this up saying that we'd love your help. We're slowly getting ready for the 1.0 release albeit a bit too slowly!

There are several ways to contribute:
 - Create new commands (PowerShell/T-SQL knowledge required)
 - Report bugs (everyone can do it)
 - Tests (Pester knowledge required)
 - Documentation: functions, website, this guide, everything can be improved (everyone can)
 - Code review (PowerShell/T-SQL knowledge required)

If you wanna help reaching 1.0
   - Standardize param names (@wsmelton)
   - Create tests for existing functions (@cl and @niphlod)
   - Review existing function documentation (@alevyinroc or @gbargsley)
   - Prepare for 1.0 with "code style" (Bill of Health, more on that later)

We strive to make any area doubtless. In any case, the Slack channel is pretty active and every area has one (or more) volunteers to refer to in case of doubts.

## Documentation
Documentation is really the area we welcome any help possible. The documentation refers to both the CBH (Comment Based Help) and the [website documentation](https://dbatools.io/functions). The CBH documentation is included with each command and is the content you see when you run `Get-Help Function-Name`. If any of that content is not clear enough or if the examples in the functions are not working, you should say so (e.g. raise an issue on GitHub or comment in Slack). Even if you are a casual user or a PowerShell newbie, we need your angle to make it as straight forward and clear as possible.

## Contribute New Commands
Start out reviewing the [list of functions on the website](https://dbatools.io/functions/), or pulling the list from the module with `Get-Command -Module dbatools -CommandType Function | Out-GridView`. If you find something similar already exists, open [a new issue on GitHub](https://GitHub.com/sqlcollaborative/dbatools/issues/new) to request an enhancement to that command. New ideas already accepted can be found on [Feature](https://github.com/sqlcollaborative/dbatools/labels/Feature) tagged issues. If nothing similar pops up, either ping @cl on Slack with your idea about the new command or open a new issue on GitHub with details or requirements you need.

## Report Bugs
[Open a new issue](https://dbatools.io/new-issue/) on GitHub and fill in all the details. The title should report the affected function, followed by a brief description (e.g. _Get-DbaDatabase - Add property x to default view_). The provided template holds most of the details coders need to fix the issue.

## Fix Bugs
We have a [step-by-step guide](https://dbatools.io/firstpull) if you don't know Github enough.
[Open a PR](https://GitHub.com/sqlcollaborative/dbatools/pulls) targeting ideally just one ps1 file (the PR needs to target the *development* branch), with the name of the function being fixed as a title. Everyone will chime in reviewing the code and either approve the PR or request changes. The more targeted and focused the PR, the easier to merge, the fastest to go into the next release. Keep them as simple as possible to speed up the process.

## Standardize Parameters and Variables
As a reference: when we refer to parameters these are the `$SqlInstance` type variables within the `param()` block that allow a function to accept input. A variable will be any `$whateverName` used within a function's code.

We chose to follow the standards below when creating parameters and variables for a function:

1) Any variable used in the parameter block must have first letter of each word capitalized. (e.g. `$SqlInstance`, `$ExcludeLogin`)
2) Any variable used in the parameter block **is required** to be singular.
3) Any variable not part of the parameter block, that is multiple words, will follow the camelCase format. (e.g. `$currentLogin`, `$dbLogin`)
4) Refrain from using single character variable names (e.g. `$i` or `$x`). Try to make them "readable" in the sense that if someone sees the variable name they can get a hint what it presents (e.g. `$db`, `$operatorName`).

When you are working with "objects" in SQL Server, say with databases, what variable name you use should be based on what operation you are doing. You can find examples of various situations in the current code of the module to see more detailed examples. As an example: in situations where you are looping over the databases for an instance, try to use a plural variable name for the collection and then single or abbreviated name in the loop for each object of that collection. e.g. `foreach ($db in $databases) {...`.

[This page](https://github.com/sqlcollaborative/dbatools/wiki/Standard-Documentation) sums up what we currently use. We aim at standardizing and reducing to a set of self-documenting and reusable parameters. If you have any questions around the above do not hesitate to ask in Slack.

## Standardize formatting and indentation

We favour consistency throughout the project and accept PRs coming from anybody. Just know that you can reformat your new function leveraging Invoke-DbaFormatter which does the groundwork for you.

## Tests
Remember that tests are needed to make sure dbatools code behaves properly. The ultimate goal is for any user to be able to run dbatools' tests within their environment and, depending on the result, be sure everything works as expected. Dbatools works on a matrix of environments that will hardly be fully covered by a Continuous Integration system. That being said, we have AppVeyor (see later) set up to run at each and every commit.

### How to write tests
To save resources and be more flexible, we split tests with tags into two main categories, "UnitTests" and "IntegrationTests". Below is a starting list of things to consider when writing your test:
- "UnitTests" do not require an instance to be up and running, and are easily the most flexible to be ran on every user computer. - "IntegrationTests" instead require one or more active instances, and there is a bit of setup to do in order to run them.
- Every one of the "IntegrationTests" may need to create a resource (e.g. a database).
- Every resource should be named with the "dbatoolsci_" prefix. _The test should attempt to clean up after itself leaving a pristine environment._
- Try to write tests thinking they may run in each and every user's test environment.

The dbatools-templates repository holds examples, but you can also inspect/copy/cannibalize existing tests. You'll see that every test file is named with a simple convention _Verb-Noun*.Tests.ps1_, and this is required by [Pester](https://GitHub.com/pester/Pester), which is the de-facto standard for running tests in PowerShell.

Tests make sure a "contract" is made between the code and its behavior: once a test is formalized, changes to the code itself or enhancement will be written making sure existing functionality is retained, making the entire dbatools experience more stable.

TODO: how to run tests in your environment, tests\manual.pester.ps1

### AppVeyor setup

AppVeyor is hooked up to test any commit, including PRs. Each commit triggers 5 builds, each referred to as a "scenario":
 - 2008R2 : a server with a single SQL Server 2008 R2 Express Edition instance available ($script:instance1)
 - 2016 : a server with a single SQL Server 2016 Developer Edition instance available ($script:instance2)
 - 2016_service: used to test service restarts
 - 2016_2017 : a server with two instances available, 2016 and 2017 Developer Edition
 - default: a server with two instances available, one SQL Server 2008 R2 Express Edition and a SQL Server 2016 Developer Edition

Builds are split among "scenario"(s) because not every test requires everything to be up and running, and resources on AppVeyor are constrained.

Ideally:
 1) Whenever possible, write UnitTests.
 2) You should write IntegrationTests ideally running in **EITHER** the 2008R2 or the 2016 "scenario".
 3) Default and 216_2017 are the most resource constrained and are left to run the Copy-* commands which are the only ones **needing** two active instances.
 4) If you want to write tests that, e.g, target **BOTH** 2008R2 and 2016, try to avoid writing tests that need both instances to be active at the same time.

AppVeyor is set up to recognize what "scenario" is required by your test, simply inspecting for the presence of combinations of "$script:instance1", "$script:instance2" and "$script:instance3". If you need to fall into case (4), write two test files, e.g. _Get-DbaFoo.first.Tests.ps1 (targeting $script:instance1 only) and _Get-DbaFoo.second.Tests.ps1_ (targeting $script:instance2 only). If you don't want to wait for the entire test suite to run (i.e. you need to run only Get-DbaFoo on AppVeyor), you can use a "magic command" within the commit message, namely `(do Get-DbaFoo)` . This will run only test files within the test folder matching this mask `tests\*Get-DbaFoo*.Tests.ps1`.

TODO: how to run your own AppVeyor before pushing a PR

### Code Coverage, AKA improving tests
A recent introduction in our CI pipeline is code coverage. [Dbatools' CodeCov](https://codecov.io/gh/sqlcollaborative/dbatools/branch/development) shows the percentage of the coverage. Each commit on GitHub triggers a build on AppVeyor. Every build on AppVeyor triggers a code coverage calculation, which is reported to codecov.io for public consumption. The more code covered the more stable the code will be. Once it reaches 100%, you can be pretty sure there will be zero surprises when you'll use the command.

If you want to start contributing new tests, choose the ones with no coverage. You can also inspect functions with low coverage and improve existing tests (https://dbatools.io/improving-tests/)


## Bill of Health

In order to reach 1.0, on top of everything discussed above, we choose to wait for each and every command to adhere to a fixed set of standards. Given most of those "checks" are on a function-by-function basis (with one or more activities tied to each "check"), we came up with the "Bill of Health". You can find it bill at [sqlcollaborative.github.io/boh](https://sqlcollaborative.github.io/boh).

When each and every function is healthy enough, the module itself will be ready for 1.0 release. We may continue to use the same approach (with different checks) for later releases.

There are a few checks which need a core developer to manually sign off the "check", but there are a lot everyone else can fix too, namely ScriptAnalyzer and CodeCoverage.

tools\dbatools\dbatools.psd1

#
# Module manifest for module 'dbatools'
#
# Generated by: Chrissy LeMaire
#
# Generated on: 9/8/2015
#
@{

    # Script module or binary module file associated with this manifest.
    RootModule             = 'dbatools.psm1'

    # Version number of this module.
    ModuleVersion          = '0.9.711'

    # ID used to uniquely identify this module
    GUID                   = '9d139310-ce45-41ce-8e8b-d76335aa1789'

    # Author of this module
    Author                 = 'Chrissy LeMaire'

    # Company or vendor of this module
    CompanyName            = 'dbatools.io'

    # Copyright statement for this module
    Copyright              = 'Copyright (c) 2018 by dbatools, licensed under MIT'

    # Description of the functionality provided by this module
    Description            = "The community module that enables SQL Server Pros to automate database development and server administration"

    # Minimum version of the Windows PowerShell engine required by this module
    PowerShellVersion      = '3.0'

    # Name of the Windows PowerShell host required by this module
    PowerShellHostName     = ''

    # Minimum version of the Windows PowerShell host required by this module
    PowerShellHostVersion  = ''

    # Minimum version of the .NET Framework required by this module
    DotNetFrameworkVersion = ''

    # Minimum version of the common language runtime (CLR) required by this module
    CLRVersion             = ''

    # Processor architecture (None, X86, Amd64, IA64) required by this module
    ProcessorArchitecture  = ''

    # Modules that must be imported into the global environment prior to importing this module
    RequiredModules        = @()

    # Assemblies that must be loaded prior to importing this module
    RequiredAssemblies     = @()

    # Script files () that are run in the caller's environment prior to importing this module
    ScriptsToProcess       = @()

    # Type files (xml) to be loaded when importing this module
    TypesToProcess         = @("xml\dbatools.Types.ps1xml")

    # Format files (xml) to be loaded when importing this module
    # "xml\dbatools.Format.ps1xml"
    FormatsToProcess       = @("xml\dbatools.Format.ps1xml")

    # Modules to import as nested modules of the module specified in ModuleToProcess
    NestedModules          = @()

    # Functions to export from this module
    # Specific functions to export for Core, etc are also found in psm1
    # FunctionsToExport specifically helps with AUTO-LOADING so do not remove
    FunctionsToExport      = @(
        'Start-DbaMigration',
        'Copy-DbaDatabase',
        'Copy-DbaLogin',
        'Copy-DbaAgentServer',
        'Copy-DbaSpConfigure',
        'Copy-DbaDbMail',
        'Copy-DbaDbAssembly',
        'Copy-DbaAgentSchedule',
        'Copy-DbaAgentOperator',
        'Copy-DbaAgentJob',
        'Copy-DbaCustomError',
        'Copy-DbaServerAuditSpecification',
        'Copy-DbaEndpoint',
        'Copy-DbaServerAudit',
        'Copy-DbaServerRole',
        'Copy-DbaResourceGovernor',
        'Copy-DbaXESession',
        'Copy-DbaBackupDevice',
        'Copy-DbaServerTrigger',
        'Copy-DbaCmsRegServer',
        'Copy-DbaSysDbUserObject',
        'Copy-DbaAgentProxy',
        'Copy-DbaAgentAlert',
        'Get-DbaDetachedDatabaseInfo',
        'Restore-DbaBackupFromDirectory',
        'Copy-DbaAgentJobCategory',
        'Test-DbaPath',
        'Export-DbaLogin',
        'Watch-DbaDbLogin',
        'Expand-DbaDbLogFile',
        'Test-DbaMigrationConstraint',
        'Test-DbaNetworkLatency',
        'Find-DbaDuplicateIndex',
        'Remove-DbaDatabaseSafely',
        'Set-DbaTempdbConfig',
        'Test-DbaTempdbConfig',
        'Repair-DbaOrphanUser',
        'Remove-DbaOrphanUser',
        'Find-DbaDbUnusedIndex',
        'Get-DbaDbSpace',
        'Test-DbaDbOwner',
        'Set-DbaDbOwner',
        'Test-DbaJobOwner',
        'Set-DbaAgentJobOwner',
        'Test-DbaDbVirtualLogFile',
        'Get-DbaDbRestoreHistory',
        'Get-DbaTcpPort',
        'Test-DbaDbCompatibility',
        'Test-DbaDbCollation',
        'Test-DbaConnectionAuthScheme',
        'Test-DbaServerName',
        'Repair-DbaServerName',
        'Stop-DbaProcess',
        'Find-DbaOrphanedFile',
        'Get-DbaAvailabilityGroup',
        'Get-DbaLastGoodCheckDb',
        'Get-DbaProcess',
        'Get-DbaRunningJob',
        'Set-DbaMaxDop',
        'Test-DbaDbRecoveryModel',
        'Test-DbaMaxDop',
        'Remove-DbaBackup',
        'Get-DbaPermission',
        'Get-DbaLastBackup',
        'Connect-DbaInstance',
        'Get-DbaBackupHistory',
        'Read-DbaBackupHeader',
        'Test-DbaLastBackup',
        'Get-DbaMaxMemory',
        'Set-DbaMaxMemory',
        'Get-DbaDbSnapshot',
        'Remove-DbaDbSnapshot',
        'Get-DbaDbRoleMember',
        'Get-DbaServerRoleMember',
        'Resolve-DbaNetworkName',
        'Export-DbaAvailabilityGroup',
        'Write-DbaDataTable',
        'New-DbaDbSnapshot',
        'Restore-DbaDbSnapshot',
        'Get-DbaServerTrigger',
        'Get-DbaDbTrigger',
        'Get-DbaDbState',
        'Set-DbaDbState',
        'Get-DbaHelpIndex',
        'Get-DbaAgentAlert',
        'Get-DbaAgentOperator',
        'Get-DbaSpConfigure',
        'Rename-DbaLogin',
        'Find-DbaAgentJob',
        'Find-DbaDatabase',
        'Get-DbaXESession',
        'Test-DbaOptimizeForAdHoc',
        'Find-DbaStoredProcedure',
        'Measure-DbaBackupThroughput',
        'Get-DbaDatabase',
        'Find-DbaUserObject',
        'Get-DbaDependency',
        'Find-DbaCommand',
        'Backup-DbaDatabase',
        'New-DbaDirectory',
        'Get-DbaDbQueryStoreOption',
        'Set-DbaDbQueryStoreOption',
        'Restore-DbaDatabase',
        'Copy-DbaDbQueryStoreOption',
        'Get-DbaExecutionPlan',
        'Export-DbaExecutionPlan',
        'Set-DbaSpConfigure',
        'Test-DbaIdentityUsage',
        'Get-DbaDbAssembly',
        'Get-DbaAgentJob',
        'Get-DbaCustomError',
        'Get-DbaCredential',
        'Get-DbaBackupDevice',
        'Get-DbaAgentProxy',
        'Get-DbaDbEncryption',
        'Remove-DbaDatabase',
        'Get-DbaQueryExecutionTime',
        'Get-DbaTempdbUsage',
        'Find-DbaDbGrowthEvent',
        'Test-DbaLinkedServerConnection',
        'Get-DbaDbFile',
        'Read-DbaTransactionLog',
        'Get-DbaDbTable',
        'Invoke-DbaDbShrink',
        'Get-DbaEstimatedCompletionTime',
        'Get-DbaLinkedServer',
        'New-DbaAgentJob',
        'Get-DbaLogin',
        'New-DbaScriptingOption',
        'Save-DbaDiagnosticQueryScript',
        'Invoke-DbaDiagnosticQuery',
        'Export-DbaDiagnosticQuery',
        'Invoke-DbaWhoIsActive',
        'Set-DbaAgentJob',
        'Remove-DbaAgentJob',
        'New-DbaAgentJobStep',
        'Set-DbaAgentJobStep',
        'Remove-DbaAgentJobStep',
        'New-DbaAgentSchedule',
        'Set-DbaAgentSchedule',
        'Remove-DbaAgentSchedule',
        'Backup-DbaDbCertificate',
        'Get-DbaDbCertificate',
        'Get-DbaEndpoint',
        'Get-DbaDbMasterKey',
        'Get-DbaSchemaChangeHistory',
        'Get-DbaServerAudit',
        'Get-DbaServerAuditSpecification',
        'Get-DbaProductKey',
        'Get-DbatoolsLog',
        'Restore-DbaDbCertificate',
        'New-DbaDbCertificate',
        'New-DbaDbMasterKey',
        'New-DbaServiceMasterKey',
        'Remove-DbaDbCertificate',
        'Remove-DbaDbMasterKey',
        'New-DbaConnectionStringBuilder',
        'Get-DbaInstanceProperty',
        'Get-DbaInstanceUserOption',
        'New-DbaConnectionString',
        'Get-DbaAgentSchedule',
        'Read-DbaTraceFile',
        'Get-DbaServerInstallDate',
        'Backup-DbaDbMasterKey',
        'Get-DbaAgentJobHistory',
        'Get-DbaMaintenanceSolutionLog',
        'Invoke-DbaDbLogShipRecovery',
        'Find-DbaTrigger',
        'Find-DbaView',
        'Invoke-DbaDbUpgrade',
        'Get-DbaDbUser',
        'Get-DbaAgentLog',
        'Get-DbaDbMailLog',
        'Get-DbaDbMailHistory',
        'Get-DbaDbView',
        'Get-DbaDbUdf',
        'Get-DbaDbPartitionFunction',
        'Get-DbaDbPartitionScheme',
        'Get-DbaDefaultPath',
        'Get-DbaDbStoredProcedure',
        'Test-DbaDbCompression',
        'Mount-DbaDatabase',
        'Dismount-DbaDatabase',
        'Get-DbaAgReplica',
        'Get-DbaAgDatabase',
        'Get-DbaModule',
        'Sync-DbaLoginPermission',
        'New-DbaCredential',
        'Get-DbaFile',
        'Set-DbaDbCompression',
        'Get-DbaTraceFlag',
        'Invoke-DbaCycleErrorLog',
        'Get-DbaAvailableCollation',
        'Get-DbaUserPermission',
        'Get-DbaAgHadr',
        'Find-DbaSimilarTable',
        'Get-DbaTrace',
        'Get-DbaSuspectPage',
        'Get-DbaWaitStatistic',
        'Clear-DbaWaitStatistics',
        'Get-DbaTopResourceUsage',
        'New-DbaLogin',
        'Get-DbaAgListener',
        'Invoke-DbaDbClone',
        'Disable-DbaTraceFlag',
        'Enable-DbaTraceFlag',
        'Start-DbaAgentJob',
        'Stop-DbaAgentJob',
        'New-DbaAgentProxy',
        'Test-DbaDbLogShipStatus',
        'Get-DbaXESessionTarget',
        'New-DbaXESmartTargetResponse',
        'New-DbaXESmartTarget',
        'Get-DbaDbVirtualLogFile',
        'Get-DbaBackupInformation',
        'Start-DbaXESession',
        'Stop-DbaXESession',
        'Set-DbaDbRecoveryModel',
        'Get-DbaDbRecoveryModel',
        'Get-DbaWaitingTask',
        'Remove-DbaDbUser',
        'Get-DbaDump',
        'Invoke-DbaAdvancedRestore',
        'Format-DbaBackupInformation',
        'Get-DbaAgentJobStep',
        'Test-DbaBackupInformation',
        'Invoke-DbaBalanceDataFiles',
        'Select-DbaBackupInformation',
        'Publish-DbaDacPackage',
        'Copy-DbaDbTableData',
        'Invoke-DbaQuery',
        'Remove-DbaLogin',
        'Get-DbaAgentJobCategory',
        'New-DbaAgentJobCategory',
        'Remove-DbaAgentJobCategory',
        'Set-DbaAgentJobCategory',
        'Get-DbaDbRole',
        'Get-DbaServerRole',
        'Find-DbaBackup',
        'Remove-DbaXESession',
        'New-DbaXESession',
        'Get-DbaXEStore',
        'New-DbaXESmartTableWriter',
        'New-DbaXESmartReplay',
        'New-DbaXESmartEmail',
        'New-DbaXESmartQueryExec',
        'Start-DbaXESmartTarget',
        'Get-DbaOrphanUser',
        'Get-DbaOpenTransaction',
        'Get-DbaDbLogShipError',
        'Test-DbaBuild',
        'Get-DbaXESessionTemplate',
        'ConvertTo-DbaXESession',
        'Start-DbaTrace',
        'Stop-DbaTrace',
        'Remove-DbaTrace',
        'Set-DbaLogin',
        'Copy-DbaXESessionTemplate',
        'Get-DbaXEObject',
        'ConvertTo-DbaDataTable',
        'Find-DbaDisabledIndex',
        'Get-DbaXESmartTarget',
        'Remove-DbaXESmartTarget',
        'Stop-DbaXESmartTarget',
        'Get-DbaCmsRegServerGroup',
        'New-DbaDbUser',
        'Measure-DbaDiskSpaceRequirement',
        'New-DbaXESmartCsvWriter',
        'Invoke-DbaXeReplay',
        'Find-DbaInstance',
        'Test-DbaDiskSpeed',
        'Get-DbaDbExtentDiff',
        'Read-DbaAuditFile',
        'Get-DbaDbCompression',
        'Invoke-DbaDbDecryptObject',
        'Get-DbaDbForeignKey',
        'Get-DbaDbCheckConstraint',
        'Set-DbaAgentAlert',
        'Get-DbaWaitResource',
        'Get-DbaDbPageInfo',
        'Get-DbaConnection',
        'Test-DbaLoginPassword',
        'Get-DbaErrorLogConfig',
        'Set-DbaErrorLogConfig',
        'Get-DbaPlanCache',
        'Clear-DbaPlanCache',
        'ConvertTo-DbaTimeline',
        'Get-DbaDbMail',
        'Get-DbaDbMailAccount',
        'Get-DbaDbMailProfile',
        'Get-DbaDbMailConfig',
        'Get-DbaDbMailServer',
        'Get-DbaResourceGovernor',
        'Get-DbaRgResourcePool',
        'Get-DbaRgWorkloadGroup',
        'Get-DbaRgClassifierFunction',
        'Export-DbaInstance',
        'Invoke-DbatoolsRenameHelper',
        'Measure-DbatoolsImport',
        'Get-DbaDeprecatedFeature',
        'Test-DbaDeprecatedFeature'
        'Get-DbaDbFeatureUsage',
        'Stop-DbaEndpoint',
        'Start-DbaEndpoint',
        'Set-DbaDbMirror',
        'Repair-DbaDbMirror',
        'Remove-DbaEndpoint',
        'Remove-DbaDbMirrorMonitor',
        'Remove-DbaDbMirror',
        'New-DbaEndpoint',
        'Invoke-DbaDbMirroring',
        'Invoke-DbaDbMirrorFailover',
        'Get-DbaDbMirrorMonitor',
        'Get-DbaDbMirror',
        'Add-DbaDbMirrorMonitor',
        'Test-DbaEndpoint',
        'Get-DbaDbSharePoint',
        'Get-DbaDbMemoryUsage',
        'Clear-DbaLatchStatistics',
        'Get-DbaCpuRingBuffer',
        'Get-DbaIoLatency',
        'Get-DbaLatchStatistic',
        'Get-DbaSpinLockStatistic',
        'Add-DbaAgDatabase',
        'Add-DbaAgListener',
        'Add-DbaAgReplica',
        'Grant-DbaAgPermission',
        'Invoke-DbaAgFailover',
        'Join-DbaAvailabilityGroup',
        'New-DbaAvailabilityGroup',
        'Remove-DbaAgDatabase',
        'Remove-DbaAgListener',
        'Remove-DbaAvailabilityGroup',
        'Revoke-DbaAgPermission',
        'Get-DbaDbCompatibility',
        'Set-DbaDbCompatibility',
        'Invoke-DbatoolsFormatter',
        'Remove-DbaAgReplica',
        'Resume-DbaAgDbDataMovement',
        'Set-DbaAgListener',
        'Set-DbaAgReplica',
        'Set-DbaAvailabilityGroup',
        'Set-DbaEndpoint',
        'Suspend-DbaAgDbDataMovement',
        'Sync-DbaAvailabilityGroup',
        'Get-DbaMemoryCondition',
        'Remove-DbaDbBackupRestoreHistory',
        'New-DbaDatabase'
        'New-DbaDacOption',
        'Get-DbaDbccHelp',
        'Get-DbaDbccMemoryStatus',
        'Get-DbaDbccProcCache',
        'Get-DbaDbccUserOption',
        'Get-DbaAgentServer',
        'Set-DbaAgentServer',
        'Invoke-DbaDbccFreeCache',
        'Export-DbatoolsConfig',
        'Import-DbatoolsConfig',
        'Reset-DbatoolsConfig',
        'Unregister-DbatoolsConfig',
        'Join-DbaPath',
        'Resolve-DbaPath',
        # noncoresmo
        # SMO issues
        'Export-DbaUser',
        'Get-DbaSsisExecutionHistory',
        'Get-DbaRepDistributor',
        'Get-DbaCmsRegServerStore',
        'Copy-DbaPolicyManagement',
        'Copy-DbaDataCollector',
        'Get-DbaCmsRegServer',
        'Copy-DbaSsisCatalog',
        'New-DbaSsisCatalog',
        'Get-DbaSsisEnvironmentVariable',
        'Get-DbaPbmCategory',
        'Get-DbaPbmCategorySubscription',
        'Get-DbaPbmCondition',
        'Get-DbaPbmObjectSet',
        'Get-DbaPbmPolicy',
        'Get-DbaPbmStore',
        'Add-DbaCmsRegServer',
        'Add-DbaCmsRegServerGroup',
        'Export-DbaCmsRegServer',
        'Import-DbaCmsRegServer',
        'Move-DbaCmsRegServer',
        'Move-DbaCmsRegServerGroup',
        'Remove-DbaCmsRegServer',
        'Remove-DbaCmsRegServerGroup',
        'Get-DbaRepPublication',
        'Test-DbaRepLatency',
        'Export-DbaRepServerSetting',
        'Get-DbaRepServer',
        # windowsonly
        # solvable filesystem issues or other workarounds
        'Install-DbaSqlWatch',
        'Uninstall-DbaSqlWatch',
        'Get-DbaRegistryRoot',
        'Install-DbaMaintenanceSolution',
        'New-DbatoolsSupportPackage',
        'Export-DbaScript',
        'Get-DbaAgentJobOutputFile',
        'Set-DbaAgentJobOutputFile',
        'Get-DbaBuildReference',
        'New-DbaDacProfile'
        'Import-DbaXESessionTemplate',
        'Export-DbaXESessionTemplate',
        'Import-DbaSpConfigure',
        'Export-DbaSpConfigure'
        'Update-Dbatools',
        'Install-DbaWhoIsActive',
        'Install-DbaFirstResponderKit',
        'Read-DbaXEFile',
        'Watch-DbaXESession',
        'Test-DbaMaxMemory', # can be fixed by not testing remote when linux is detected
        'Rename-DbaDatabase', # can maybebe fixed by not remoting when linux is detected
        # CM and Windows functions
        'Update-DbaInstance',
        'Invoke-DbaPfRelog',
        'Get-DbaPfDataCollectorCounter',
        'Get-DbaPfDataCollectorCounterSample',
        'Get-DbaPfDataCollector',
        'Get-DbaPfDataCollectorSet',
        'Start-DbaPfDataCollectorSet',
        'Stop-DbaPfDataCollectorSet',
        'Export-DbaPfDataCollectorSetTemplate',
        'Get-DbaPfDataCollectorSetTemplate',
        'Import-DbaPfDataCollectorSetTemplate',
        'Remove-DbaPfDataCollectorSet',
        'Add-DbaPfDataCollectorCounter',
        'Remove-DbaPfDataCollectorCounter',
        'Get-DbaPfAvailableCounter',
        'Export-DbaXECsv',
        'Get-DbaOperatingSystem',
        'Get-DbaComputerSystem',
        'Set-DbaPrivilege',
        'Set-DbaTcpPort',
        'Set-DbaCmConnection',
        'Get-DbaUptime',
        'Get-DbaMemoryUsage',
        'Clear-DbaConnectionPool',
        'Get-DbaLocaleSetting',
        'Get-DbaFilestream',
        'Enable-DbaFilestream',
        'Disable-DbaFilestream',
        'Get-DbaCpuUsage',
        'Get-DbaPowerPlan',
        'Get-DbaWsfcAvailableDisk',
        'Get-DbaWsfcCluster',
        'Get-DbaWsfcDisk',
        'Get-DbaWsfcNetwork',
        'Get-DbaWsfcNetworkInterface',
        'Get-DbaWsfcNode',
        'Get-DbaWsfcResource',
        'Get-DbaWsfcResourceType',
        'Get-DbaWsfcRole',
        'Get-DbaWsfcSharedVolume',
        'Export-DbaCredential',
        'Export-DbaLinkedServer',
        'Get-DbaFeature',
        'Update-DbaServiceAccount',
        'Remove-DbaClientAlias',
        'Disable-DbaAgHadr',
        'Enable-DbaAgHadr',
        'Stop-DbaService',
        'Start-DbaService',
        'Restart-DbaService',
        'New-DbaClientAlias',
        'Get-DbaClientAlias',
        'Remove-DbaNetworkCertificate',
        'Enable-DbaForceNetworkEncryption',
        'Disable-DbaForceNetworkEncryption',
        'Get-DbaForceNetworkEncryption',
        'Remove-DbaComputerCertificate',
        'New-DbaComputerCertificate',
        'Get-DbaComputerCertificate',
        'Add-DbaComputerCertificate',
        'Get-DbaNetworkCertificate',
        'Set-DbaNetworkCertificate',
        'Invoke-DbaDbLogShipping',
        'New-DbaCmConnection',
        'Get-DbaCmConnection',
        'Remove-DbaCmConnection',
        'Test-DbaCmConnection',
        'Get-DbaCmObject',
        'Set-DbaStartupParameter',
        'Get-DbaNetworkActivity',
        'Get-DbaServerProtocol'
        'Watch-DbaUpdate',
        'Uninstall-DbaWatchUpdate',
        'Install-DbaWatchUpdate',
        'Get-DbaPrivilege',
        'Get-DbaMsdtc',
        'Get-DbaPageFileSetting',
        'Copy-DbaCredential',
        'Test-DbaConnection',
        'Reset-DbaAdmin',
        'Copy-DbaLinkedServer',
        'Get-DbaDiskSpace',
        'Test-DbaDiskAllocation',
        'Test-DbaPowerPlan',
        'Set-DbaPowerPlan',
        'Test-DbaDiskAlignment',
        'Get-DbaStartupParameter',
        'Get-DbaSpn',
        'Test-DbaSpn',
        'Set-DbaSpn',
        'Remove-DbaSpn',
        'Get-DbaService',
        'Get-DbaClientProtocol',
        'Get-DbaWindowsLog',
        # WPF
        'Show-DbaServerFileSystem',
        'Show-DbaDbList',
        # AD?
        'Test-DbaWindowsLogin',
        'Find-DbaLoginInGroup',
        # 3rd party non-core DLL or exe
        'Import-DbaCsv',
        'Export-DbaDacPackage', # relies on sqlpackage.exe
        # Config system
        'Get-DbatoolsConfig',
        'Get-DbatoolsConfigValue',
        'Register-DbatoolsConfig',
        # Unknown
        'Get-DbaErrorLog',
        'Get-DbaManagementObject',
        'Test-DbaManagementObject'
    )

    # Cmdlets to export from this module
    CmdletsToExport        = @(
        'Select-DbaObject',
        'Set-DbatoolsConfig'
    )

    # Variables to export from this module
    VariablesToExport      = ''

    # Aliases to export from this module
    # Aliases are stored in dbatools.psm1
    # KEEP Detach-DbaDatabase, Dismount-DbaDatabase and Start-SqlMigration FOREVER
    AliasesToExport        = '*'

    # List of all modules packaged with this module
    ModuleList             = @()

    # List of all files packaged with this module
    FileList               = ''

    PrivateData            = @{
        # PSData is module packaging and gallery metadata embedded in PrivateData
        # It's for rebuilding PowerShellGet (and PoshCode) NuGet-style packages
        # We had to do this because it's the only place we're allowed to extend the manifest
        # https://connect.microsoft.com/PowerShell/feedback/details/421837
        PSData = @{
            # The primary categorization of this module (from the TechNet Gallery tech tree).
            Category     = "Databases"

            # Keyword tags to help users find this module via navigations and search.
            Tags         = @('sqlserver', 'migrations', 'sql', 'dba', 'databases')

            # The web address of an icon which can be used in galleries to represent this module
            IconUri      = "https://dbatools.io/logo.png"

            # The web address of this module's project or support homepage.
            ProjectUri   = "https://dbatools.io"

            # The web address of this module's license. Points to a page that's embeddable and linkable.
            LicenseUri   = "https://opensource.org/licenses/MIT"

            # Release notes for this particular version of the module
            ReleaseNotes = "https://dbatools.io/changelog"

            # If true, the LicenseUrl points to an end-user license (not just a source license) which requires the user agreement before use.
            # RequireLicenseAcceptance = ""

            # Indicates this is a pre-release/testing version of the module.
            IsPrerelease = 'True'
        }
    }
}
# SIG # Begin signature block
# MIIcYgYJKoZIhvcNAQcCoIIcUzCCHE8CAQExCzAJBgUrDgMCGgUAMGkGCisGAQQB
# gjcCAQSgWzBZMDQGCisGAQQBgjcCAR4wJgIDAQAABBAfzDtgWUsITrck0sYpfvNR
# AgEAAgEAAgEAAgEAAgEAMCEwCQYFKw4DAhoFAAQUGZfYN7CbMecxZ2kB80NyoF9t
# VciggheRMIIFGjCCBAKgAwIBAgIQAsF1KHTVwoQxhSrYoGRpyjANBgkqhkiG9w0B
# AQsFADByMQswCQYDVQQGEwJVUzEVMBMGA1UEChMMRGlnaUNlcnQgSW5jMRkwFwYD
# VQQLExB3d3cuZGlnaWNlcnQuY29tMTEwLwYDVQQDEyhEaWdpQ2VydCBTSEEyIEFz
# c3VyZWQgSUQgQ29kZSBTaWduaW5nIENBMB4XDTE3MDUwOTAwMDAwMFoXDTIwMDUx
# MzEyMDAwMFowVzELMAkGA1UEBhMCVVMxETAPBgNVBAgTCFZpcmdpbmlhMQ8wDQYD
# VQQHEwZWaWVubmExETAPBgNVBAoTCGRiYXRvb2xzMREwDwYDVQQDEwhkYmF0b29s
# czCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAI8ng7JxnekL0AO4qQgt
# Kr6p3q3SNOPh+SUZH+SyY8EA2I3wR7BMoT7rnZNolTwGjUXn7bRC6vISWg16N202
# 1RBWdTGW2rVPBVLF4HA46jle4hcpEVquXdj3yGYa99ko1w2FOWzLjKvtLqj4tzOh
# K7wa/Gbmv0Si/FU6oOmctzYMI0QXtEG7lR1HsJT5kywwmgcjyuiN28iBIhT6man0
# Ib6xKDv40PblKq5c9AFVldXUGVeBJbLhcEAA1nSPSLGdc7j4J2SulGISYY7ocuX3
# tkv01te72Mv2KkqqpfkLEAQjXgtM0hlgwuc8/A4if+I0YtboCMkVQuwBpbR9/6ys
# Z+sCAwEAAaOCAcUwggHBMB8GA1UdIwQYMBaAFFrEuXsqCqOl6nEDwGD5LfZldQ5Y
# MB0GA1UdDgQWBBRcxSkFqeA3vvHU0aq2mVpFRSOdmjAOBgNVHQ8BAf8EBAMCB4Aw
# EwYDVR0lBAwwCgYIKwYBBQUHAwMwdwYDVR0fBHAwbjA1oDOgMYYvaHR0cDovL2Ny
# bDMuZGlnaWNlcnQuY29tL3NoYTItYXNzdXJlZC1jcy1nMS5jcmwwNaAzoDGGL2h0
# dHA6Ly9jcmw0LmRpZ2ljZXJ0LmNvbS9zaGEyLWFzc3VyZWQtY3MtZzEuY3JsMEwG
# A1UdIARFMEMwNwYJYIZIAYb9bAMBMCowKAYIKwYBBQUHAgEWHGh0dHBzOi8vd3d3
# LmRpZ2ljZXJ0LmNvbS9DUFMwCAYGZ4EMAQQBMIGEBggrBgEFBQcBAQR4MHYwJAYI
# KwYBBQUHMAGGGGh0dHA6Ly9vY3NwLmRpZ2ljZXJ0LmNvbTBOBggrBgEFBQcwAoZC
# aHR0cDovL2NhY2VydHMuZGlnaWNlcnQuY29tL0RpZ2lDZXJ0U0hBMkFzc3VyZWRJ
# RENvZGVTaWduaW5nQ0EuY3J0MAwGA1UdEwEB/wQCMAAwDQYJKoZIhvcNAQELBQAD
# ggEBANuBGTbzCRhgG0Th09J0m/qDqohWMx6ZOFKhMoKl8f/l6IwyDrkG48JBkWOA
# QYXNAzvp3Ro7aGCNJKRAOcIjNKYef/PFRfFQvMe07nQIj78G8x0q44ZpOVCp9uVj
# sLmIvsmF1dcYhOWs9BOG/Zp9augJUtlYpo4JW+iuZHCqjhKzIc74rEEiZd0hSm8M
# asshvBUSB9e8do/7RhaKezvlciDaFBQvg5s0fICsEhULBRhoyVOiUKUcemprPiTD
# xh3buBLuN0bBayjWmOMlkG1Z6i8DUvWlPGz9jiBT3ONBqxXfghXLL6n8PhfppBhn
# daPQO8+SqF5rqrlyBPmRRaTz2GQwggUwMIIEGKADAgECAhAECRgbX9W7ZnVTQ7Vv
# lVAIMA0GCSqGSIb3DQEBCwUAMGUxCzAJBgNVBAYTAlVTMRUwEwYDVQQKEwxEaWdp
# Q2VydCBJbmMxGTAXBgNVBAsTEHd3dy5kaWdpY2VydC5jb20xJDAiBgNVBAMTG0Rp
# Z2lDZXJ0IEFzc3VyZWQgSUQgUm9vdCBDQTAeFw0xMzEwMjIxMjAwMDBaFw0yODEw
# MjIxMjAwMDBaMHIxCzAJBgNVBAYTAlVTMRUwEwYDVQQKEwxEaWdpQ2VydCBJbmMx
# GTAXBgNVBAsTEHd3dy5kaWdpY2VydC5jb20xMTAvBgNVBAMTKERpZ2lDZXJ0IFNI
# QTIgQXNzdXJlZCBJRCBDb2RlIFNpZ25pbmcgQ0EwggEiMA0GCSqGSIb3DQEBAQUA
# A4IBDwAwggEKAoIBAQD407Mcfw4Rr2d3B9MLMUkZz9D7RZmxOttE9X/lqJ3bMtdx
# 6nadBS63j/qSQ8Cl+YnUNxnXtqrwnIal2CWsDnkoOn7p0WfTxvspJ8fTeyOU5JEj
# lpB3gvmhhCNmElQzUHSxKCa7JGnCwlLyFGeKiUXULaGj6YgsIJWuHEqHCN8M9eJN
# YBi+qsSyrnAxZjNxPqxwoqvOf+l8y5Kh5TsxHM/q8grkV7tKtel05iv+bMt+dDk2
# DZDv5LVOpKnqagqrhPOsZ061xPeM0SAlI+sIZD5SlsHyDxL0xY4PwaLoLFH3c7y9
# hbFig3NBggfkOItqcyDQD2RzPJ6fpjOp/RnfJZPRAgMBAAGjggHNMIIByTASBgNV
# HRMBAf8ECDAGAQH/AgEAMA4GA1UdDwEB/wQEAwIBhjATBgNVHSUEDDAKBggrBgEF
# BQcDAzB5BggrBgEFBQcBAQRtMGswJAYIKwYBBQUHMAGGGGh0dHA6Ly9vY3NwLmRp
# Z2ljZXJ0LmNvbTBDBggrBgEFBQcwAoY3aHR0cDovL2NhY2VydHMuZGlnaWNlcnQu
# Y29tL0RpZ2lDZXJ0QXNzdXJlZElEUm9vdENBLmNydDCBgQYDVR0fBHoweDA6oDig
# NoY0aHR0cDovL2NybDQuZGlnaWNlcnQuY29tL0RpZ2lDZXJ0QXNzdXJlZElEUm9v
# dENBLmNybDA6oDigNoY0aHR0cDovL2NybDMuZGlnaWNlcnQuY29tL0RpZ2lDZXJ0
# QXNzdXJlZElEUm9vdENBLmNybDBPBgNVHSAESDBGMDgGCmCGSAGG/WwAAgQwKjAo
# BggrBgEFBQcCARYcaHR0cHM6Ly93d3cuZGlnaWNlcnQuY29tL0NQUzAKBghghkgB
# hv1sAzAdBgNVHQ4EFgQUWsS5eyoKo6XqcQPAYPkt9mV1DlgwHwYDVR0jBBgwFoAU
# Reuir/SSy4IxLVGLp6chnfNtyA8wDQYJKoZIhvcNAQELBQADggEBAD7sDVoks/Mi
# 0RXILHwlKXaoHV0cLToaxO8wYdd+C2D9wz0PxK+L/e8q3yBVN7Dh9tGSdQ9RtG6l
# jlriXiSBThCk7j9xjmMOE0ut119EefM2FAaK95xGTlz/kLEbBw6RFfu6r7VRwo0k
# riTGxycqoSkoGjpxKAI8LpGjwCUR4pwUR6F6aGivm6dcIFzZcbEMj7uo+MUSaJ/P
# QMtARKUT8OZkDCUIQjKyNookAv4vcn4c10lFluhZHen6dGRrsutmQ9qzsIzV6Q3d
# 9gEgzpkxYz0IGhizgZtPxpMQBvwHgfqL2vmCSfdibqFT+hKUGIUukpHqaGxEMrJm
# oecYpJpkUe8wggZqMIIFUqADAgECAhADAZoCOv9YsWvW1ermF/BmMA0GCSqGSIb3
# DQEBBQUAMGIxCzAJBgNVBAYTAlVTMRUwEwYDVQQKEwxEaWdpQ2VydCBJbmMxGTAX
# BgNVBAsTEHd3dy5kaWdpY2VydC5jb20xITAfBgNVBAMTGERpZ2lDZXJ0IEFzc3Vy
# ZWQgSUQgQ0EtMTAeFw0xNDEwMjIwMDAwMDBaFw0yNDEwMjIwMDAwMDBaMEcxCzAJ
# BgNVBAYTAlVTMREwDwYDVQQKEwhEaWdpQ2VydDElMCMGA1UEAxMcRGlnaUNlcnQg
# VGltZXN0YW1wIFJlc3BvbmRlcjCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoC
# ggEBAKNkXfx8s+CCNeDg9sYq5kl1O8xu4FOpnx9kWeZ8a39rjJ1V+JLjntVaY1sC
# SVDZg85vZu7dy4XpX6X51Id0iEQ7Gcnl9ZGfxhQ5rCTqqEsskYnMXij0ZLZQt/US
# s3OWCmejvmGfrvP9Enh1DqZbFP1FI46GRFV9GIYFjFWHeUhG98oOjafeTl/iqLYt
# WQJhiGFyGGi5uHzu5uc0LzF3gTAfuzYBje8n4/ea8EwxZI3j6/oZh6h+z+yMDDZb
# esF6uHjHyQYuRhDIjegEYNu8c3T6Ttj+qkDxss5wRoPp2kChWTrZFQlXmVYwk/PJ
# YczQCMxr7GJCkawCwO+k8IkRj3cCAwEAAaOCAzUwggMxMA4GA1UdDwEB/wQEAwIH
# gDAMBgNVHRMBAf8EAjAAMBYGA1UdJQEB/wQMMAoGCCsGAQUFBwMIMIIBvwYDVR0g
# BIIBtjCCAbIwggGhBglghkgBhv1sBwEwggGSMCgGCCsGAQUFBwIBFhxodHRwczov
# L3d3dy5kaWdpY2VydC5jb20vQ1BTMIIBZAYIKwYBBQUHAgIwggFWHoIBUgBBAG4A
# eQAgAHUAcwBlACAAbwBmACAAdABoAGkAcwAgAEMAZQByAHQAaQBmAGkAYwBhAHQA
# ZQAgAGMAbwBuAHMAdABpAHQAdQB0AGUAcwAgAGEAYwBjAGUAcAB0AGEAbgBjAGUA
# IABvAGYAIAB0AGgAZQAgAEQAaQBnAGkAQwBlAHIAdAAgAEMAUAAvAEMAUABTACAA
# YQBuAGQAIAB0AGgAZQAgAFIAZQBsAHkAaQBuAGcAIABQAGEAcgB0AHkAIABBAGcA
# cgBlAGUAbQBlAG4AdAAgAHcAaABpAGMAaAAgAGwAaQBtAGkAdAAgAGwAaQBhAGIA
# aQBsAGkAdAB5ACAAYQBuAGQAIABhAHIAZQAgAGkAbgBjAG8AcgBwAG8AcgBhAHQA
# ZQBkACAAaABlAHIAZQBpAG4AIABiAHkAIAByAGUAZgBlAHIAZQBuAGMAZQAuMAsG
# CWCGSAGG/WwDFTAfBgNVHSMEGDAWgBQVABIrE5iymQftHt+ivlcNK2cCzTAdBgNV
# HQ4EFgQUYVpNJLZJMp1KKnkag0v0HonByn0wfQYDVR0fBHYwdDA4oDagNIYyaHR0
# cDovL2NybDMuZGlnaWNlcnQuY29tL0RpZ2lDZXJ0QXNzdXJlZElEQ0EtMS5jcmww
# OKA2oDSGMmh0dHA6Ly9jcmw0LmRpZ2ljZXJ0LmNvbS9EaWdpQ2VydEFzc3VyZWRJ
# RENBLTEuY3JsMHcGCCsGAQUFBwEBBGswaTAkBggrBgEFBQcwAYYYaHR0cDovL29j
# c3AuZGlnaWNlcnQuY29tMEEGCCsGAQUFBzAChjVodHRwOi8vY2FjZXJ0cy5kaWdp
# Y2VydC5jb20vRGlnaUNlcnRBc3N1cmVkSURDQS0xLmNydDANBgkqhkiG9w0BAQUF
# AAOCAQEAnSV+GzNNsiaBXJuGziMgD4CH5Yj//7HUaiwx7ToXGXEXzakbvFoWOQCd
# 42yE5FpA+94GAYw3+puxnSR+/iCkV61bt5qwYCbqaVchXTQvH3Gwg5QZBWs1kBCg
# e5fH9j/n4hFBpr1i2fAnPTgdKG86Ugnw7HBi02JLsOBzppLA044x2C/jbRcTBu7k
# A7YUq/OPQ6dxnSHdFMoVXZJB2vkPgdGZdA0mxA5/G7X1oPHGdwYoFenYk+VVFvC7
# Cqsc21xIJ2bIo4sKHOWV2q7ELlmgYd3a822iYemKC23sEhi991VUQAOSK2vCUcIK
# SK+w1G7g9BQKOhvjjz3Kr2qNe9zYRDCCBs0wggW1oAMCAQICEAb9+QOWA63qAArr
# Pye7uhswDQYJKoZIhvcNAQEFBQAwZTELMAkGA1UEBhMCVVMxFTATBgNVBAoTDERp
# Z2lDZXJ0IEluYzEZMBcGA1UECxMQd3d3LmRpZ2ljZXJ0LmNvbTEkMCIGA1UEAxMb
# RGlnaUNlcnQgQXNzdXJlZCBJRCBSb290IENBMB4XDTA2MTExMDAwMDAwMFoXDTIx
# MTExMDAwMDAwMFowYjELMAkGA1UEBhMCVVMxFTATBgNVBAoTDERpZ2lDZXJ0IElu
# YzEZMBcGA1UECxMQd3d3LmRpZ2ljZXJ0LmNvbTEhMB8GA1UEAxMYRGlnaUNlcnQg
# QXNzdXJlZCBJRCBDQS0xMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEA
# 6IItmfnKwkKVpYBzQHDSnlZUXKnE0kEGj8kz/E1FkVyBn+0snPgWWd+etSQVwpi5
# tHdJ3InECtqvy15r7a2wcTHrzzpADEZNk+yLejYIA6sMNP4YSYL+x8cxSIB8HqIP
# kg5QycaH6zY/2DDD/6b3+6LNb3Mj/qxWBZDwMiEWicZwiPkFl32jx0PdAug7Pe2x
# QaPtP77blUjE7h6z8rwMK5nQxl0SQoHhg26Ccz8mSxSQrllmCsSNvtLOBq6thG9I
# hJtPQLnxTPKvmPv2zkBdXPao8S+v7Iki8msYZbHBc63X8djPHgp0XEK4aH631XcK
# J1Z8D2KkPzIUYJX9BwSiCQIDAQABo4IDejCCA3YwDgYDVR0PAQH/BAQDAgGGMDsG
# A1UdJQQ0MDIGCCsGAQUFBwMBBggrBgEFBQcDAgYIKwYBBQUHAwMGCCsGAQUFBwME
# BggrBgEFBQcDCDCCAdIGA1UdIASCAckwggHFMIIBtAYKYIZIAYb9bAABBDCCAaQw
# OgYIKwYBBQUHAgEWLmh0dHA6Ly93d3cuZGlnaWNlcnQuY29tL3NzbC1jcHMtcmVw
# b3NpdG9yeS5odG0wggFkBggrBgEFBQcCAjCCAVYeggFSAEEAbgB5ACAAdQBzAGUA
# IABvAGYAIAB0AGgAaQBzACAAQwBlAHIAdABpAGYAaQBjAGEAdABlACAAYwBvAG4A
# cwB0AGkAdAB1AHQAZQBzACAAYQBjAGMAZQBwAHQAYQBuAGMAZQAgAG8AZgAgAHQA
# aABlACAARABpAGcAaQBDAGUAcgB0ACAAQwBQAC8AQwBQAFMAIABhAG4AZAAgAHQA
# aABlACAAUgBlAGwAeQBpAG4AZwAgAFAAYQByAHQAeQAgAEEAZwByAGUAZQBtAGUA
# bgB0ACAAdwBoAGkAYwBoACAAbABpAG0AaQB0ACAAbABpAGEAYgBpAGwAaQB0AHkA
# IABhAG4AZAAgAGEAcgBlACAAaQBuAGMAbwByAHAAbwByAGEAdABlAGQAIABoAGUA
# cgBlAGkAbgAgAGIAeQAgAHIAZQBmAGUAcgBlAG4AYwBlAC4wCwYJYIZIAYb9bAMV
# MBIGA1UdEwEB/wQIMAYBAf8CAQAweQYIKwYBBQUHAQEEbTBrMCQGCCsGAQUFBzAB
# hhhodHRwOi8vb2NzcC5kaWdpY2VydC5jb20wQwYIKwYBBQUHMAKGN2h0dHA6Ly9j
# YWNlcnRzLmRpZ2ljZXJ0LmNvbS9EaWdpQ2VydEFzc3VyZWRJRFJvb3RDQS5jcnQw
# gYEGA1UdHwR6MHgwOqA4oDaGNGh0dHA6Ly9jcmwzLmRpZ2ljZXJ0LmNvbS9EaWdp
# Q2VydEFzc3VyZWRJRFJvb3RDQS5jcmwwOqA4oDaGNGh0dHA6Ly9jcmw0LmRpZ2lj
# ZXJ0LmNvbS9EaWdpQ2VydEFzc3VyZWRJRFJvb3RDQS5jcmwwHQYDVR0OBBYEFBUA
# EisTmLKZB+0e36K+Vw0rZwLNMB8GA1UdIwQYMBaAFEXroq/0ksuCMS1Ri6enIZ3z
# bcgPMA0GCSqGSIb3DQEBBQUAA4IBAQBGUD7Jtygkpzgdtlspr1LPUukxR6tWXHvV
# DQtBs+/sdR90OPKyXGGinJXDUOSCuSPRujqGcq04eKx1XRcXNHJHhZRW0eu7NoR3
# zCSl8wQZVann4+erYs37iy2QwsDStZS9Xk+xBdIOPRqpFFumhjFiqKgz5Js5p8T1
# zh14dpQlc+Qqq8+cdkvtX8JLFuRLcEwAiR78xXm8TBJX/l/hHrwCXaj++wc4Tw3G
# XZG5D2dFzdaD7eeSDY2xaYxP+1ngIw/Sqq4AfO6cQg7PkdcntxbuD8O9fAqg7iwI
# VYUiuOsYGk38KiGtSTGDR5V3cdyxG0tLHBCcdxTBnU8vWpUIKRAmMYIEOzCCBDcC
# AQEwgYYwcjELMAkGA1UEBhMCVVMxFTATBgNVBAoTDERpZ2lDZXJ0IEluYzEZMBcG
# A1UECxMQd3d3LmRpZ2ljZXJ0LmNvbTExMC8GA1UEAxMoRGlnaUNlcnQgU0hBMiBB
# c3N1cmVkIElEIENvZGUgU2lnbmluZyBDQQIQAsF1KHTVwoQxhSrYoGRpyjAJBgUr
# DgMCGgUAoHgwGAYKKwYBBAGCNwIBDDEKMAigAoAAoQKAADAZBgkqhkiG9w0BCQMx
# DAYKKwYBBAGCNwIBBDAcBgorBgEEAYI3AgELMQ4wDAYKKwYBBAGCNwIBFTAjBgkq
# hkiG9w0BCQQxFgQUo4xJihM2OCusGm+ETAHp6ngvtugwDQYJKoZIhvcNAQEBBQAE
# ggEAfX6oKWPWXUp6YcEpCtNvKFqLJ6skv8lEvdOuCrkmNlDQcLDa+c2kGoEcInSd
# DUBFRXdy3jRtBJsE9rIjRXvTif+KqUMu/cZ2w7ntC0x4QOiE7zalGoI7b756YsKC
# LukIKKs6EcCylxYBSqvWWma1Y20WwzOaM5R2YVyBy0J4LwDv3BQhYRAiZcxrnVkZ
# 0IBw/JiStGVpIdQOzQjNeEH/tVp64K4XomMiVG4MS7e8Q7A5AGtZIKmb4QgGePHs
# Uurjx5I8EoEiNdGQHxpO4idoZoaJjFsfAS/skqdOIF85hJmqiYL10msy4QYivfKK
# hyiD+6E8FsQeTBzdW8hvHTk5LqGCAg8wggILBgkqhkiG9w0BCQYxggH8MIIB+AIB
# ATB2MGIxCzAJBgNVBAYTAlVTMRUwEwYDVQQKEwxEaWdpQ2VydCBJbmMxGTAXBgNV
# BAsTEHd3dy5kaWdpY2VydC5jb20xITAfBgNVBAMTGERpZ2lDZXJ0IEFzc3VyZWQg
# SUQgQ0EtMQIQAwGaAjr/WLFr1tXq5hfwZjAJBgUrDgMCGgUAoF0wGAYJKoZIhvcN
# AQkDMQsGCSqGSIb3DQEHATAcBgkqhkiG9w0BCQUxDxcNMTgxMjA3MTAzMzMzWjAj
# BgkqhkiG9w0BCQQxFgQUNq/on1NfYNgOvXqhnBb6KI0uKhAwDQYJKoZIhvcNAQEB
# BQAEggEAhoksPKdGwITm60pGrZM7dUzJOTeS6GYABl9Fwk0jDj4m7m5ft94agK6K
# O5d1YQYnrfRtEMGw64lbtqJmWuCSrkQSFwc+e8SHkscdm856y8cSrh3CHMoPaL2v
# DU0QC5Ipezx5sl8eLo3TT7U43LRq4aEHOhq5aW5EMon2xZF22HhkB55tFZKpDeG5
# Td5iwOCHkFofXrLS9W5GJF+4cfPguSu1nw66NGB0uiVswpyDaBmpF3Gpcvjz6xOo
# 6O6V7hf4NrtMbfZuL8dmdSMnnv6b7jYYgrpHVvNexhcgbZO1tzdxaOpVlpU5BDwl
# npA+pN4JCmBa+TXCoPbXtUcG002Z4g==
# SIG # End signature block

tools\dbatools\dbatools.psm1

$start = Get-Date

if (($PSVersionTable.PSVersion.Major -lt 6) -or ($PSVersionTable.Keys -contains "Platform" -and $PSVersionTable.Platform -eq "Win32NT")) {
    $script:isWindows = $true
} else {
    $script:isWindows = $false
}

   
#region Import helper functions
function Import-ModuleFile {
    <#
    .SYNOPSIS
        Helps import dbatools files according to configuration

    .DESCRIPTION
        Helps import dbatools files according to configuration
        Always dotsource this function!

    .PARAMETER Path
        The full path to the file to import

    .EXAMPLE
        PS C:\> Import-ModuleFile -Path $function.FullName

        Imports the file stored at '$function.FullName'
    #>
    [CmdletBinding()]
    param (
        $Path
    )

    if ($script:doDotSource) {
        . (Resolve-Path -Path $Path)
    } else {
        $ExecutionContext.InvokeCommand.InvokeScript($false, ([scriptblock]::Create([io.file]::ReadAllText((Resolve-Path -Path $Path)))), $null, $null)
    }
}

function Write-ImportTime {
    <#
    .SYNOPSIS
        Writes an entry to the import module time debug list

    .DESCRIPTION
        Writes an entry to the import module time debug list

    .PARAMETER Text
        The message to write

    .EXAMPLE
        PS C:\> Write-ImportTime -Text "Starting SMO Import"

        Adds the message "Starting SMO Import" to the debug list
#>
    [CmdletBinding()]
    param (
        [string]$Text,
        $Timestamp = (Get-Date)
    )

    if ($dbatools_disableTimeMeasurements) { return }

    if (-not $script:dbatools_ImportPerformance) { $script:dbatools_ImportPerformance = @() }

    if (([System.Management.Automation.PSTypeName]'Sqlcollaborative.Dbatools.Configuration.Config').Type -eq $null) {
        $script:dbatools_ImportPerformance += New-Object PSObject -Property @{ Time = $timestamp; Action = $Text }
    } else {
        if ([Sqlcollaborative.Dbatools.dbaSystem.DebugHost]::ImportTimeEntries.Count -eq 0) {
            foreach ($entry in $script:dbatools_ImportPerformance) { [Sqlcollaborative.Dbatools.dbaSystem.DebugHost]::ImportTimeEntries.Add((New-Object Sqlcollaborative.Dbatools.dbaSystem.StartTimeEntry($entry.Action, $entry.Time, ([System.Management.Automation.Runspaces.Runspace]::DefaultRunspace.InstanceId)))) }
        }

        [Sqlcollaborative.Dbatools.dbaSystem.DebugHost]::ImportTimeEntries.Add((New-Object Sqlcollaborative.Dbatools.dbaSystem.StartTimeEntry($Text, $timestamp, ([System.Management.Automation.Runspaces.Runspace]::DefaultRunspace.InstanceId))))
    }
}

Write-ImportTime -Text "Start" -Timestamp $start
Write-ImportTime -Text "Loading import helper functions"
#endregion Import helper functions

# Not supporting the provider path at this time 2/28/2017
if (((Resolve-Path .\).Path).StartsWith("SQLSERVER:\")) {
    Write-Warning "SQLSERVER:\ provider not supported. Please change to another directory and reload the module."
    Write-Warning "Going to continue loading anyway, but expect issues."
}

Write-ImportTime -Text "Resolved path to not SQLSERVER PSDrive"

$script:PSModuleRoot = $PSScriptRoot

if (($PSVersionTable.Keys -contains "PSEdition") -and ($PSVersionTable.PSEdition -ne 'Desktop')) {
    $script:core = $true
} else {
    $script:core = $false
}

#region Import Defines
$dbatoolsSystemUserNode = Get-ItemProperty -Path "HKCU:\SOFTWARE\Microsoft\WindowsPowerShell\dbatools\System" -ErrorAction Ignore
$dbatoolsSystemSystemNode = Get-ItemProperty -Path "HKLM:\SOFTWARE\Microsoft\WindowsPowerShell\dbatools\System" -ErrorAction Ignore

#region Dot Sourcing
# Detect whether at some level dotsourcing was enforced
$script:doDotSource = $false
if ($dbatools_dotsourcemodule) { $script:doDotSource = $true }
if ($dbatoolsSystemSystemNode.DoDotSource) { $script:doDotSource = $true }
if ($dbatoolsSystemUserNode.DoDotSource) { $script:doDotSource = $true }
#endregion Dot Sourcing

#region Copy DLL Mode
$script:copyDllMode = $false
if ($dbatools_copydllmode) { $script:copyDllMode = $true }
if ($dbatoolsSystemSystemNode.CopyDllMode) { $script:copyDllMode = $true }
if ($dbatoolsSystemUserNode.CopyDllMode) { $script:copyDllMode = $true }
#endregion Copy DLL Mode

#region Always Compile
$script:alwaysBuildLibrary = $false
if ($dbatools_alwaysbuildlibrary) { $script:alwaysBuildLibrary = $true }
if ($dbatoolsSystemSystemNode.AlwaysBuildLibrary) { $script:alwaysBuildLibrary = $true }
if ($dbatoolsSystemUserNode.AlwaysBuildLibrary) { $script:alwaysBuildLibrary = $true }
#endregion Always Compile

#region Serial Import
$script:serialImport = $false
if ($dbatools_serialimport) { $script:serialImport = $true }
if ($dbatoolsSystemSystemNode.SerialImport) { $script:serialImport = $true }
if ($dbatoolsSystemUserNode.SerialImport) { $script:serialImport = $true }
#endregion Serial Import

#region Multi File Import
$script:multiFileImport = $false
if ($dbatools_multiFileImport) { $script:multiFileImport = $true }
if ($dbatoolsSystemSystemNode.MultiFileImport) { $script:multiFileImport = $true }
if ($dbatoolsSystemUserNode.MultiFileImport) { $script:multiFileImport = $true }
if (Test-Path -Path "$script:PSModuleRoot\.git") { $script:multiFileImport = $true }
if (Test-Path -Path "$script:PSModuleRoot/.git") { $script:multiFileImport = $true }
#endregion Multi File Import

Write-ImportTime -Text "Validated defines"
#endregion Import Defines

if (($PSVersionTable.PSVersion.Major -le 5) -or $script:isWindows) {
    Get-ChildItem -Path (Resolve-Path "$script:PSModuleRoot\bin\") -Filter "*.dll" -Recurse | Unblock-File -ErrorAction Ignore
    Write-ImportTime -Text "Unblocking Files"
}


$script:DllRoot = (Resolve-Path -Path "$script:PSModuleRoot\bin\")

<#
# Removed this because it doesn't seem to work well xplat and on win7 and it doesn't provide enough value
# Define folder in which to copy dll files before importing
if (-not $script:copyDllMode) { $script:DllRoot = (Resolve-Path "$script:PSModuleRoot\bin\") }
else {
    $libraryTempPath = (Resolve-Path "$($env:TEMP)\dbatools-$(Get-Random -Minimum 1000000 -Maximum 9999999)")
    while (Test-Path -Path $libraryTempPath) {
        $libraryTempPath = (Resolve-Path "$($env:TEMP)\dbatools-$(Get-Random -Minimum 1000000 -Maximum 9999999)")
    }
    $script:DllRoot = $libraryTempPath
    $null = New-Item -Path $libraryTempPath -ItemType Directory
}
#>

if (-not ([System.Management.Automation.PSTypeName]'Microsoft.SqlServer.Management.Smo.Server').Type) {
    . Import-ModuleFile "$script:PSModuleRoot\internal\scripts\smoLibraryImport.ps1"
    Write-ImportTime -Text "Starting import SMO libraries"
}

<#

    Do the rest of the loading

#>

# This technique helps a little bit
# https://becomelotr.wordpress.com/2017/02/13/expensive-dot-sourcing/

# Load our own custom library
# Should always come before function imports
. Import-ModuleFile "$script:PSModuleRoot\bin\library.ps1"
. Import-ModuleFile "$script:PSModuleRoot\bin\typealiases.ps1"
Write-ImportTime -Text "Loading dbatools library"

# Tell the library where the module is based, just in case
[Sqlcollaborative.Dbatools.dbaSystem.SystemHost]::ModuleBase = $script:PSModuleRoot

if ($script:multiFileImport) {
    # All internal functions privately available within the toolset
    foreach ($function in (Get-ChildItem -Path (Resolve-Path -Path "$script:PSModuleRoot\internal\functions\") -Recurse | Where-Object Extension -EQ '.ps1')) {
        . Import-ModuleFile $function.FullName
    }
    Write-ImportTime -Text "Loading Internal Commands"

    . Import-ModuleFile -Path (Resolve-Path -Path "$script:PSModuleRoot\internal\scripts\cmdlets.ps1")
    Write-ImportTime -Text "Registering cmdlets"

    # All exported functions
    foreach ($function in (Get-ChildItem -Path (Resolve-Path -Path "$script:PSModuleRoot\functions\") -Recurse | Where-Object Extension -EQ '.ps1')) {
        . Import-ModuleFile $function.FullName
    }
    Write-ImportTime -Text "Loading Public Commands"

} else {
    Add-Type -Assembly System.IO.Compression.FileSystem
    $zip = [System.IO.Compression.ZipFile]::OpenRead((Resolve-Path -Path "$script:PSModuleRoot\allcommands.zip"))
    $stream = $zip.Entries.Open()
    $reader = New-Object IO.StreamReader($stream)
    $ExecutionContext.InvokeCommand.InvokeScript($false, ([scriptblock]::Create(($reader.ReadToEnd()))), $null, $null)
    $reader.Close()
    $stream.Close()
    $zip.Dispose()
    Write-ImportTime -Text "Loading Public and Private Commands"

    . Import-ModuleFile (Resolve-Path -Path "$script:PSModuleRoot\internal\scripts\cmdlets.ps1")
    Write-ImportTime -Text "Registering cmdlets"
}

# Load configuration system
# Should always go after library and path setting
. Import-ModuleFile "$script:PSModuleRoot\internal\configurations\configuration.ps1"
Write-ImportTime -Text "Configuration System"

# Resolving the path was causing trouble when it didn't exist yet
# Not converting the path separators based on OS was also an issue.
if (-not ([Sqlcollaborative.Dbatools.Message.LogHost]::LoggingPath)) {
    [Sqlcollaborative.Dbatools.Message.LogHost]::LoggingPath = Join-DbaPath $script:AppData "PowerShell" "dbatools"
}

# Run all optional code
# Note: Each optional file must include a conditional governing whether it's run at all.
# Validations were moved into the other files, in order to prevent having to update dbatools.psm1 every time
# 96ms
foreach ($function in (Get-ChildItem -Path (Resolve-Path -Path "$script:PSModuleRoot\optional\*.ps1"))) {
    . Import-ModuleFile $function.FullName
}
Write-ImportTime -Text "Loading Optional Commands"

# Process TEPP parameters
. Import-ModuleFile -Path (Resolve-Path -Path "$script:PSModuleRoot\internal\scripts\insertTepp.ps1")
Write-ImportTime -Text "Loading TEPP"


# Process transforms
. Import-ModuleFile -Path (Resolve-Path -Path "$script:PSModuleRoot\internal\scripts\message-transforms.ps1")
Write-ImportTime -Text "Loading Message Transforms"

# Load scripts that must be individually run at the end #
#-------------------------------------------------------#

# Start the logging system (requires the configuration system up and running)
. Import-ModuleFile -Path (Resolve-Path -Path "$script:PSModuleRoot\internal\scripts\logfilescript.ps1")
Write-ImportTime -Text "Script: Logging"

# Start the tepp asynchronous update system (requires the configuration system up and running)
. Import-ModuleFile -Path (Resolve-Path -Path "$script:PSModuleRoot\internal\scripts\updateTeppAsync.ps1")
Write-ImportTime -Text "Script: Asynchronous TEPP Cache"


# Start the maintenance system (requires pretty much everything else already up and running)
. Import-ModuleFile -Path (Resolve-Path -Path "$script:PSModuleRoot\internal\scripts\dbatools-maintenance.ps1")
Write-ImportTime -Text "Script: Maintenance"

#region Aliases
# I renamed this function to be more accurate - 1ms
# changed to a script var so it can be used in the Rename-DbatoolsCommand
$script:renames = @(
    @{
        "AliasName"  = "Copy-SqlAgentCategory"
        "Definition" = "Copy-DbaAgentJobCategory"
    },
    @{
        "AliasName"  = "Copy-SqlAlert"
        "Definition" = "Copy-DbaAgentAlert"
    },
    @{
        "AliasName"  = "Copy-SqlAudit"
        "Definition" = "Copy-DbaServerAudit"
    },
    @{
        "AliasName"  = "Copy-SqlAuditSpecification"
        "Definition" = "Copy-DbaServerAuditSpecification"
    },
    @{
        "AliasName"  = "Copy-SqlBackupDevice"
        "Definition" = "Copy-DbaBackupDevice"
    },
    @{
        "AliasName"  = "Copy-SqlCentralManagementServer"
        "Definition" = "Copy-DbaCmsRegServer"
    },
    @{
        "AliasName"  = "Copy-SqlCredential"
        "Definition" = "Copy-DbaCredential"
    },
    @{
        "AliasName"  = "Copy-SqlCustomError"
        "Definition" = "Copy-DbaCustomError"
    },
    @{
        "AliasName"  = "Copy-SqlDatabase"
        "Definition" = "Copy-DbaDatabase"
    },
    @{
        "AliasName"  = "Copy-SqlDatabaseAssembly"
        "Definition" = "Copy-DbaDbAssembly"
    },
    @{
        "AliasName"  = "Copy-SqlDatabaseMail"
        "Definition" = "Copy-DbaDbMail"
    },
    @{
        "AliasName"  = "Copy-SqlDataCollector"
        "Definition" = "Copy-DbaDataCollector"
    },
    @{
        "AliasName"  = "Copy-SqlEndpoint"
        "Definition" = "Copy-DbaEndpoint"
    },
    @{
        "AliasName"  = "Copy-SqlExtendedEvent"
        "Definition" = "Copy-DbaXESession"
    },
    @{
        "AliasName"  = "Copy-SqlJob"
        "Definition" = "Copy-DbaAgentJob"
    },
    @{
        "AliasName"  = "Copy-SqlJobServer"
        "Definition" = "Copy-SqlServerAgent"
    },
    @{
        "AliasName"  = "Copy-SqlLinkedServer"
        "Definition" = "Copy-DbaLinkedServer"
    },
    @{
        "AliasName"  = "Copy-SqlLogin"
        "Definition" = "Copy-DbaLogin"
    },
    @{
        "AliasName"  = "Copy-SqlOperator"
        "Definition" = "Copy-DbaAgentOperator"
    },
    @{
        "AliasName"  = "Copy-SqlPolicyManagement"
        "Definition" = "Copy-DbaPolicyManagement"
    },
    @{
        "AliasName"  = "Copy-SqlProxyAccount"
        "Definition" = "Copy-DbaAgentProxy"
    },
    @{
        "AliasName"  = "Copy-SqlResourceGovernor"
        "Definition" = "Copy-DbaResourceGovernor"
    },
    @{
        "AliasName"  = "Copy-SqlServerAgent"
        "Definition" = "Copy-DbaAgentServer"
    },
    @{
        "AliasName"  = "Copy-SqlServerTrigger"
        "Definition" = "Copy-DbaServerTrigger"
    },
    @{
        "AliasName"  = "Copy-SqlSharedSchedule"
        "Definition" = "Copy-DbaAgentSchedule"
    },
    @{
        "AliasName"  = "Copy-SqlSpConfigure"
        "Definition" = "Copy-DbaSpConfigure"
    },
    @{
        "AliasName"  = "Copy-SqlSsisCatalog"
        "Definition" = "Copy-DbaSsisCatalog"
    },
    @{
        "AliasName"  = "Copy-SqlSysDbUserObjects"
        "Definition" = "Copy-DbaSysDbUserObject"
    },
    @{
        "AliasName"  = "Copy-SqlUserDefinedMessage"
        "Definition" = "Copy-SqlCustomError"
    },
    @{
        "AliasName"  = "Expand-SqlTLogResponsibly"
        "Definition" = "Expand-DbaDbLogFile"
    },
    @{
        "AliasName"  = "Export-SqlLogin"
        "Definition" = "Export-DbaLogin"
    },
    @{
        "AliasName"  = "Export-SqlSpConfigure"
        "Definition" = "Export-DbaSpConfigure"
    },
    @{
        "AliasName"  = "Export-SqlUser"
        "Definition" = "Export-DbaUser"
    },
    @{
        "AliasName"  = "Find-SqlDuplicateIndex"
        "Definition" = "Find-DbaDuplicateIndex"
    },
    @{
        "AliasName"  = "Find-SqlUnusedIndex"
        "Definition" = "Find-DbaDbUnusedIndex"
    },
    @{
        "AliasName"  = "Get-SqlMaxMemory"
        "Definition" = "Get-DbaMaxMemory"
    },
    @{
        "AliasName"  = "Get-SqlRegisteredServerName"
        "Definition" = "Get-DbaCmsRegServer"
    },
    @{
        "AliasName"  = "Get-DbaCmsRegServerName"
        "Definition" = "Get-DbaCmsRegServer"
    },
    @{
        "AliasName"  = "Get-SqlServerKey"
        "Definition" = "Get-DbaProductKey"
    },
    @{
        "AliasName"  = "Import-SqlSpConfigure"
        "Definition" = "Import-DbaSpConfigure"
    },
    @{
        "AliasName"  = "Install-SqlWhoIsActive"
        "Definition" = "Install-DbaWhoIsActive"
    },
    @{
        "AliasName"  = "Remove-SqlDatabaseSafely"
        "Definition" = "Remove-DbaDatabaseSafely"
    },
    @{
        "AliasName"  = "Remove-SqlOrphanUser"
        "Definition" = "Remove-DbaOrphanUser"
    },
    @{
        "AliasName"  = "Repair-SqlOrphanUser"
        "Definition" = "Repair-DbaOrphanUser"
    },
    @{
        "AliasName"  = "Reset-SqlAdmin"
        "Definition" = "Reset-DbaAdmin"
    },
    @{
        "AliasName"  = "Reset-SqlSaPassword"
        "Definition" = "Reset-SqlAdmin"
    },
    @{
        "AliasName"  = "Restore-SqlBackupFromDirectory"
        "Definition" = "Restore-DbaBackupFromDirectory"
    },
    @{
        "AliasName"  = "Set-SqlMaxMemory"
        "Definition" = "Set-DbaMaxMemory"
    },
    @{
        "AliasName"  = "Set-SqlTempDbConfiguration"
        "Definition" = "Set-DbaTempdbConfig"
    },
    @{
        "AliasName"  = "Show-SqlDatabaseList"
        "Definition" = "Show-DbaDbList"
    },
    @{
        "AliasName"  = "Show-SqlMigrationConstraint"
        "Definition" = "Test-SqlMigrationConstraint"
    },
    @{
        "AliasName"  = "Show-SqlServerFileSystem"
        "Definition" = "Show-DbaServerFileSystem"
    },
    @{
        "AliasName"  = "Show-SqlWhoIsActive"
        "Definition" = "Invoke-DbaWhoIsActive"
    },
    @{
        "AliasName"  = "Start-SqlMigration"
        "Definition" = "Start-DbaMigration"
    },
    @{
        "AliasName"  = "Sync-SqlLoginPermissions"
        "Definition" = "Sync-DbaLoginPermission"
    },
    @{
        "AliasName"  = "Sync-DbaSqlLoginPermission"
        "Definition" = "Sync-DbaLoginPermission"
    },
    @{
        "AliasName"  = "Test-SqlConnection"
        "Definition" = "Test-DbaConnection"
    },
    @{
        "AliasName"  = "Test-SqlDiskAllocation"
        "Definition" = "Test-DbaDiskAllocation"
    },
    @{
        "AliasName"  = "Test-SqlMigrationConstraint"
        "Definition" = "Test-DbaMigrationConstraint"
    },
    @{
        "AliasName"  = "Test-SqlNetworkLatency"
        "Definition" = "Test-DbaNetworkLatency"
    },
    @{
        "AliasName"  = "Test-SqlPath"
        "Definition" = "Test-DbaPath"
    },
    @{
        "AliasName"  = "Test-SqlTempDbConfiguration"
        "Definition" = "Test-DbaTempdbConfig"
    },
    @{
        "AliasName"  = "Watch-SqlDbLogin"
        "Definition" = "Watch-DbaDbLogin"
    },
    @{
        "AliasName"  = "Get-DiskSpace"
        "Definition" = "Get-DbaDiskSpace"
    },
    @{
        "AliasName"  = "Restore-HallengrenBackup"
        "Definition" = "Restore-SqlBackupFromDirectory"
    },
    @{
        "AliasName"  = "Get-DbaDatabaseFreeSpace"
        "Definition" = "Get-DbaDbSpace"
    },
    @{
        "AliasName"  = "Set-DbaQueryStoreConfig"
        "Definition" = "Set-DbaDbQueryStoreOption"
    },
    @{
        "AliasName"  = "Get-DbaQueryStoreConfig"
        "Definition" = "Get-DbaDbQueryStoreOption"
    },
    @{
        "AliasName"  = "Connect-DbaServer"
        "Definition" = "Connect-DbaInstance"
    },
    @{
        "AliasName"  = "Get-DbaInstance"
        "Definition" = "Connect-DbaInstance"
    },
    @{
        "AliasName"  = "Get-DbaXEventSession"
        "Definition" = "Get-DbaXESession"
    },
    @{
        "AliasName"  = "Get-DbaXEventSessionTarget"
        "Definition" = "Get-DbaXESessionTarget"
    },
    @{
        "AliasName"  = "Read-DbaXEventFile"
        "Definition" = "Read-DbaXEFile"
    },
    @{
        "AliasName"  = "Watch-DbaXEventSession"
        "Definition" = "Watch-DbaXESession"
    },
    @{
        "AliasName"  = "Get-DbaDatabaseCertificate"
        "Definition" = "Get-DbaDbCertificate"
    },
    @{
        "AliasName"  = "New-DbaDatabaseCertificate"
        "Definition" = "New-DbaDbCertificate"
    },
    @{
        "AliasName"  = "Remove-DbaDatabaseCertificate"
        "Definition" = "Remove-DbaDbCertificate"
    },
    @{
        "AliasName"  = "Restore-DbaDatabaseCertificate"
        "Definition" = "Restore-DbaDbCertificate"
    },
    @{
        "AliasName"  = "Backup-DbaDatabaseCertificate"
        "Definition" = "Backup-DbaDbCertificate"
    },
    @{
        "AliasName"  = "Find-DbaDatabaseGrowthEvent"
        "Definition" = "Find-DbaDbGrowthEvent"
    },
    @{
        "AliasName"  = "Get-DbaTraceFile"
        "Definition" = "Get-DbaTrace"
    },
    @{
        "AliasName"  = "Out-DbaDataTable"
        "Definition" = "ConvertTo-DbaDataTable"
    },
    @{
        "AliasName"  = "Invoke-DbaCmd"
        "Definition" = "Invoke-DbaQuery"
    },
    @{
        "AliasName"  = "Test-DbaVirtualLogFile"
        "Definition" = "Test-DbaDbVirtualLogFile"
    },
    @{
        "AliasName"  = "Test-DbaFullRecoveryModel"
        "Definition" = "Test-DbaDbRecoveryModel"
    },
    @{
        "AliasName"  = "Get-DbaDatabaseSnapshot"
        "Definition" = "Get-DbaDbSnapshot"
    },
    @{
        "AliasName"  = "New-DbaDatabaseSnapshot"
        "Definition" = "New-DbaDbSnapshot"
    },
    @{
        "AliasName"  = "Remove-DbaDatabaseSnapshot"
        "Definition" = "Remove-DbaDbSnapshot"
    },
    @{
        "AliasName"  = "Restore-DbaDatabaseSnapshot"
        "Definition" = "Restore-DbaDbSnapshot"
    },
    @{
        "AliasName"  = "Get-DbaLog"
        "Definition" = "Get-DbaErrorLog"
    },
    @{
        "AliasName"  = "Test-DbaValidLogin"
        "Definition" = "Test-DbaWindowsLogin"
    },
    @{
        "AliasName"  = "Get-DbaJobCategory"
        "Definition" = "Get-DbaAgentJobCategory"
    },
    @{
        "AliasName"  = "Invoke-DbaDatabaseShrink"
        "Definition" = "Invoke-DbaDbShrink"
    },
    @{
        "AliasName"  = "Get-DbaPolicy"
        "Definition" = "Get-DbaPbmPolicy"
    },
    @{
        "AliasName"  = "Backup-DbaDatabaseMasterKey"
        "Definition" = "Backup-DbaDbMasterKey"
    },
    @{
        "AliasName"  = "Get-DbaDatabaseMasterKey"
        "Definition" = "Get-DbaDbMasterKey"
    },
    @{
        "AliasName"  = "Remove-DbaDatabaseMasterKey"
        "Definition" = "Remove-DbaDbMasterKey"
    },
    @{
        "AliasName"  = "New-DbaDatabaseMasterKey"
        "Definition" = "New-DbaDbMasterKey"
    },
    @{
        "AliasName"  = "Get-DbaDatabaseAssembly"
        "Definition" = "Get-DbaDbAssembly"
    },
    @{
        "AliasName"  = "Copy-DbaDatabaseAssembly"
        "Definition" = "Copy-DbaDbAssembly"
    },
    @{
        "AliasName"  = "Get-DbaDatabaseEncryption"
        "Definition" = "Get-DbaDbEncryption"
    },
    @{
        "AliasName"  = "Get-DbaDatabaseFile"
        "Definition" = "Get-DbaDbFile"
    },
    @{
        "AliasName"  = "Get-DbaDatabasePartitionFunction"
        "Definition" = "Get-DbaDbPartitionFunction"
    },
    @{
        "AliasName"  = "Get-DbaDatabasePartitionScheme"
        "Definition" = "Get-DbaDbPartitionScheme"
    },
    @{
        "AliasName"  = "Get-DbaDatabaseSpace"
        "Definition" = "Get-DbaDbSpace"
    },
    @{
        "AliasName"  = "Get-DbaDatabaseState"
        "Definition" = "Get-DbaDbState"
    },
    @{
        "AliasName"  = "Get-DbaDatabaseUdf"
        "Definition" = "Get-DbaDbUdf"
    },
    @{
        "AliasName"  = "Get-DbaDatabaseUser"
        "Definition" = "Get-DbaDbUser"
    },
    @{
        "AliasName"  = "Get-DbaDatabaseView"
        "Definition" = "Get-DbaDbView"
    },
    @{
        "AliasName"  = "Invoke-DbaDatabaseClone"
        "Definition" = "Invoke-DbaDbClone"
    },
    @{
        "AliasName"  = "Invoke-DbaDatabaseUpgrade"
        "Definition" = "Invoke-DbaDbUpgrade"
    },
    @{
        "AliasName"  = "Set-DbaDatabaseOwner"
        "Definition" = "Set-DbaDbOwner"
    },
    @{
        "AliasName"  = "Set-DbaDatabaseState"
        "Definition" = "Set-DbaDbState"
    },
    @{
        "AliasName"  = "Show-DbaDatabaseList"
        "Definition" = "Show-DbaDbList"
    },
    @{
        "AliasName"  = "Test-DbaDatabaseCollation"
        "Definition" = "Test-DbaDbCollation"
    },
    @{
        "AliasName"  = "Test-DbaDatabaseCompatibility"
        "Definition" = "Test-DbaDbCompatibility"
    },
    @{
        "AliasName"  = "Test-DbaDatabaseOwner"
        "Definition" = "Test-DbaDbOwner"
    },
    @{
        "AliasName"  = "Clear-DbaSqlConnectionPool"
        "Definition" = "Clear-DbaConnectionPool"
    },
    @{
        "AliasName"  = "Copy-DbaSqlDataCollector"
        "Definition" = "Copy-DbaDataCollector"
    },
    @{
        "AliasName"  = "Copy-DbaSqlPolicyManagement"
        "Definition" = "Copy-DbaPolicyManagement"
    },
    @{
        "AliasName"  = "Copy-DbaSqlServerAgent"
        "Definition" = "Copy-DbaAgentServer"
    },
    @{
        "AliasName"  = "Get-DbaSqlBuildReference"
        "Definition" = "Get-DbaBuildReference"
    },
    @{
        "AliasName"  = "Get-DbaSqlFeature"
        "Definition" = "Get-DbaFeature"
    },
    @{
        "AliasName"  = "Get-DbaSqlInstanceProperty"
        "Definition" = "Get-DbaInstanceProperty"
    },
    @{
        "AliasName"  = "Get-DbaSqlInstanceUserOption"
        "Definition" = "Get-DbaInstanceUserOption"
    },
    @{
        "AliasName"  = "Get-DbaSqlManagementObject"
        "Definition" = "Get-DbaManagementObject"
    },
    @{
        "AliasName"  = "Get-DbaSqlModule"
        "Definition" = "Get-DbaModule"
    },
    @{
        "AliasName"  = "Get-DbaSqlProductKey"
        "Definition" = "Get-DbaProductKey"
    },
    @{
        "AliasName"  = "Get-DbaSqlRegistryRoot"
        "Definition" = "Get-DbaRegistryRoot"
    },
    @{
        "AliasName"  = "Get-DbaSqlService"
        "Definition" = "Get-DbaService"
    },
    @{
        "AliasName"  = "Invoke-DbaSqlQuery"
        "Definition" = "Invoke-DbaQuery"
    },
    @{
        "AliasName"  = "New-DbaSqlConnectionString"
        "Definition" = "New-DbaConnectionString"
    },
    @{
        "AliasName"  = "New-DbaSqlConnectionStringBuilder"
        "Definition" = "New-DbaConnectionStringBuilder"
    },
    @{
        "AliasName"  = "New-DbaSqlDirectory"
        "Definition" = "New-DbaDirectory"
    },
    @{
        "AliasName"  = "Restart-DbaSqlService"
        "Definition" = "Restart-DbaService"
    },
    @{
        "AliasName"  = "Start-DbaSqlService"
        "Definition" = "Start-DbaService"
    },
    @{
        "AliasName"  = "Stop-DbaSqlService"
        "Definition" = "Stop-DbaService"
    },
    @{
        "AliasName"  = "Test-DbaSqlBuild"
        "Definition" = "Test-DbaBuild"
    },
    @{
        "AliasName"  = "Test-DbaSqlManagementObject"
        "Definition" = "Test-DbaManagementObject"
    },
    @{
        "AliasName"  = "Test-DbaSqlPath"
        "Definition" = "Test-DbaPath"
    },
    @{
        "AliasName"  = "Update-DbaSqlServiceAccount"
        "Definition" = "Update-DbaServiceAccount"
    },
    @{
        "AliasName"  = "Set-DbaTempDbConfiguration"
        "Definition" = "Set-DbaTempdbConfig"
    },
    @{
        "AliasName"  = "Test-DbaTempDbConfiguration"
        "Definition" = "Test-DbaTempdbConfig"
    },
    @{
        "AliasName"  = "Export-DbaDacpac"
        "Definition" = "Export-DbaDacPackage"
    },
    @{
        "AliasName"  = "Publish-DbaDacpac"
        "Definition" = "Publish-DbaDacPackage"
    },
    @{
        "AliasName"  = "Get-DbaConfig"
        "Definition" = "Get-DbatoolsConfig"
    },
    @{
        "AliasName"  = "Set-DbaConfig"
        "Definition" = "Set-DbatoolsConfig"
    },
    @{
        "AliasName"  = "Get-DbaConfigValue"
        "Definition" = "Get-DbatoolsConfigValue"
    },
    @{
        "AliasName"  = "Register-DbaConfig"
        "Definition" = "Register-DbatoolsConfig"
    },
    @{
        "AliasName"  = "New-DbaPublishProfile"
        "Definition" = "New-DbaDacProfile"
    },
    @{
        "AliasName"  = "Get-DbaDbQueryStoreOptions"
        "Definition" = "Get-DbaDbQueryStoreOption"
    },
    @{
        "AliasName"  = "Set-DbaDbQueryStoreOptions"
        "Definition" = "Set-DbaDbQueryStoreOption"
    },
    @{
        "AliasName"  = "Copy-DbaDatabaseMail"
        "Definition" = "Copy-DbaDbMail"
    },
    @{
        "AliasName"  = "Get-DbaUserLevelPermission"
        "Definition" = "Get-DbaUserPermission"
    },
    @{
        "AliasName"  = "Get-DbaDistributor"
        "Definition" = "Get-DbaRepDistributor"
    },
    @{
        "AliasName"  = "Get-DbaTable"
        "Definition" = "Get-DbaDbTable"
    },
    @{
        "AliasName"  = "Copy-DbaTableData"
        "Definition" = "Copy-DbaDbTableData"
    }, @{
        "AliasName"  = "Add-DbaRegisteredServer"
        "Definition" = "Add-DbaCmsRegServer"
    },
    @{
        "AliasName"  = "Add-DbaRegisteredServerGroup"
        "Definition" = "Add-DbaCmsRegServerGroup"
    },
    @{
        "AliasName"  = "Export-DbaRegisteredServer"
        "Definition" = "Export-DbaCmsRegServer"
    },
    @{
        "AliasName"  = "Get-DbaRegisteredServerGroup"
        "Definition" = "Get-DbaCmsRegServerGroup"
    },
    @{
        "AliasName"  = "Get-DbaRegisteredServerStore"
        "Definition" = "Get-DbaCmsRegServerStore"
    },
    @{
        "AliasName"  = "Import-DbaRegisteredServer"
        "Definition" = "Import-DbaCmsRegServer"
    },
    @{
        "AliasName"  = "Move-DbaRegisteredServer"
        "Definition" = "Move-DbaCmsRegServer"
    },
    @{
        "AliasName"  = "Move-DbaRegisteredServerGroup"
        "Definition" = "Move-DbaCmsRegServerGroup"
    },
    @{
        "AliasName"  = "Remove-DbaRegisteredServer"
        "Definition" = "Remove-DbaCmsRegServer"
    },
    @{
        "AliasName"  = "Remove-DbaRegisteredServerGroup"
        "Definition" = "Remove-DbaCmsRegServerGroup"
    },
    @{
        "AliasName"  = "Get-DbaLogShippingError"
        "Definition" = "Get-DbaDbLogShipError"
    },
    @{
        "AliasName"  = "Invoke-DbaLogShipping"
        "Definition" = "Invoke-DbaDbLogShipping"
    },
    @{
        "AliasName"  = "Invoke-DbaLogShippingRecovery"
        "Definition" = "Invoke-DbaDbLogShipRecovery"
    },
    @{
        "AliasName"  = "Test-DbaLogShippingStatus"
        "Definition" = "Test-DbaDbLogShipStatus"
    },
    @{
        "AliasName"  = "Get-DbaRoleMember"
        "Definition" = "Get-DbaDbRoleMember"
    },
    @{
        "AliasName"  = "Get-DbaRestoreHistory"
        "Definition" = "Get-DbaDbRestoreHistory"
    },
    @{
        "AliasName"  = "Expand-DbaTLogResponsibly"
        "Definition" = "Expand-DbaDbLogFile"
    },
    @{
        "AliasName"  = "Test-DbaRecoveryModel"
        "Definition" = "Test-DbaDbRecoveryModel"
    },
    @{
        "AliasName"  = "Copy-DbaAgentCategory"
        "Definition" = "Copy-DbaAgentJobCategory"
    },
    @{
        "AliasName"  = "Copy-DbaAgentProxyAccount"
        "Definition" = "Copy-DbaAgentProxy"
    },
    @{
        "AliasName"  = "Copy-DbaAgentSharedSchedule"
        "Definition" = "Copy-DbaAgentSchedule"
    },
    @{
        "AliasName"  = "Copy-DbaCentralManagementServer"
        "Definition" = "Copy-DbaCmsRegServer"
    },
    @{
        "AliasName"  = "Copy-DbaExtendedEvent"
        "Definition" = "Copy-DbaXESession"
    },
    @{
        "AliasName"  = "Copy-DbaQueryStoreConfig"
        "Definition" = "Copy-DbaDbQueryStoreOption"
    },
    @{
        "AliasName"  = "Import-DbaCsvToSql"
        "Definition" = "Import-DbaCsv"
    },
    @{
        "AliasName"  = "Set-DbaJobOwner"
        "Definition" = "Set-DbaAgentJobOwner"
    }
)

$script:renames | ForEach-Object {
    if (-not (Test-Path Alias:$($_.AliasName))) { Set-Alias -Scope Global -Name $($_.AliasName) -Value $($_.Definition) }
}


# Leave forever
$forever = @(
    @{
        "AliasName"  = "Attach-DbaDatabase"
        "Definition" = "Mount-DbaDatabase"
    },
    @{
        "AliasName"  = "Detach-DbaDatabase"
        "Definition" = "Dismount-DbaDatabase"
    },
    @{
        "AliasName"  = "Get-DbaRegisteredServer"
        "Definition" = "Get-DbaCmsRegServer"
    }
)
$forever | ForEach-Object {
    if (-not (Test-Path Alias:$($_.AliasName))) { Set-Alias -Scope Global -Name $($_.AliasName) -Value $($_.Definition) }
}
#endregion Aliases

#region Post-Import Cleanup
Write-ImportTime -Text "Loading Aliases"

# region Commands
$script:xplat = @(
    'Start-DbaMigration',
    'Copy-DbaDatabase',
    'Copy-DbaLogin',
    'Copy-DbaAgentServer',
    'Copy-DbaSpConfigure',
    'Copy-DbaDbMail',
    'Copy-DbaDbAssembly',
    'Copy-DbaAgentSchedule',
    'Copy-DbaAgentOperator',
    'Copy-DbaAgentJob',
    'Copy-DbaCustomError',
    'Copy-DbaServerAuditSpecification',
    'Copy-DbaEndpoint',
    'Copy-DbaServerAudit',
    'Copy-DbaServerRole',
    'Copy-DbaResourceGovernor',
    'Copy-DbaXESession',
    'Copy-DbaServerTrigger',
    'Copy-DbaCmsRegServer',
    'Copy-DbaSysDbUserObject',
    'Copy-DbaAgentProxy',
    'Copy-DbaAgentAlert',
    'Get-DbaDetachedDatabaseInfo',
    'Restore-DbaBackupFromDirectory',
    'Copy-DbaAgentJobCategory',
    'Test-DbaPath',
    'Export-DbaLogin',
    'Watch-DbaDbLogin',
    'Expand-DbaDbLogFile',
    'Test-DbaMigrationConstraint',
    'Test-DbaNetworkLatency',
    'Find-DbaDuplicateIndex',
    'Remove-DbaDatabaseSafely',
    'Set-DbaTempdbConfig',
    'Test-DbaTempdbConfig',
    'Repair-DbaOrphanUser',
    'Remove-DbaOrphanUser',
    'Find-DbaDbUnusedIndex',
    'Get-DbaDbSpace',
    'Test-DbaDbOwner',
    'Set-DbaDbOwner',
    'Test-DbaJobOwner',
    'Set-DbaAgentJobOwner',
    'Test-DbaDbVirtualLogFile',
    'Get-DbaDbRestoreHistory',
    'Get-DbaTcpPort',
    'Test-DbaDbCompatibility',
    'Test-DbaDbCollation',
    'Test-DbaConnectionAuthScheme',
    'Test-DbaServerName',
    'Repair-DbaServerName',
    'Stop-DbaProcess',
    'Find-DbaOrphanedFile',
    'Get-DbaAvailabilityGroup',
    'Get-DbaLastGoodCheckDb',
    'Get-DbaProcess',
    'Get-DbaRunningJob',
    'Set-DbaMaxDop',
    'Test-DbaDbRecoveryModel',
    'Test-DbaMaxDop',
    'Remove-DbaBackup',
    'Get-DbaPermission',
    'Get-DbaLastBackup',
    'Connect-DbaInstance',
    'Get-DbaBackupHistory',
    'Read-DbaBackupHeader',
    'Test-DbaLastBackup',
    'Get-DbaMaxMemory',
    'Set-DbaMaxMemory',
    'Get-DbaDbSnapshot',
    'Remove-DbaDbSnapshot',
    'Get-DbaDbRoleMember',
    'Get-DbaServerRoleMember',
    'Resolve-DbaNetworkName',
    'Export-DbaAvailabilityGroup',
    'Write-DbaDataTable',
    'New-DbaDbSnapshot',
    'Restore-DbaDbSnapshot',
    'Get-DbaServerTrigger',
    'Get-DbaDbTrigger',
    'Get-DbaDbState',
    'Set-DbaDbState',
    'Get-DbaHelpIndex',
    'Get-DbaAgentAlert',
    'Get-DbaAgentOperator',
    'Get-DbaSpConfigure',
    'Rename-DbaLogin',
    'Find-DbaAgentJob',
    'Find-DbaDatabase',
    'Get-DbaXESession',
    'Test-DbaOptimizeForAdHoc',
    'Find-DbaStoredProcedure',
    'Measure-DbaBackupThroughput',
    'Get-DbaDatabase',
    'Find-DbaUserObject',
    'Get-DbaDependency',
    'Find-DbaCommand',
    'Backup-DbaDatabase',
    'New-DbaDirectory',
    'Get-DbaDbQueryStoreOption',
    'Set-DbaDbQueryStoreOption',
    'Restore-DbaDatabase',
    'Copy-DbaDbQueryStoreOption',
    'Get-DbaExecutionPlan',
    'Export-DbaExecutionPlan',
    'Set-DbaSpConfigure',
    'Test-DbaIdentityUsage',
    'Get-DbaDbAssembly',
    'Get-DbaAgentJob',
    'Get-DbaCustomError',
    'Get-DbaCredential',
    'Get-DbaBackupDevice',
    'Get-DbaAgentProxy',
    'Get-DbaDbEncryption',
    'Remove-DbaDatabase',
    'Get-DbaQueryExecutionTime',
    'Get-DbaTempdbUsage',
    'Find-DbaDbGrowthEvent',
    'Test-DbaLinkedServerConnection',
    'Get-DbaDbFile',
    'Read-DbaTransactionLog',
    'Get-DbaDbTable',
    'Invoke-DbaDbShrink',
    'Get-DbaEstimatedCompletionTime',
    'Get-DbaLinkedServer',
    'New-DbaAgentJob',
    'Get-DbaLogin',
    'New-DbaScriptingOption',
    'Save-DbaDiagnosticQueryScript',
    'Invoke-DbaDiagnosticQuery',
    'Export-DbaDiagnosticQuery',
    'Invoke-DbaWhoIsActive',
    'Set-DbaAgentJob',
    'Remove-DbaAgentJob',
    'New-DbaAgentJobStep',
    'Set-DbaAgentJobStep',
    'Remove-DbaAgentJobStep',
    'New-DbaAgentSchedule',
    'Set-DbaAgentSchedule',
    'Remove-DbaAgentSchedule',
    'Backup-DbaDbCertificate',
    'Get-DbaDbCertificate',
    'Get-DbaEndpoint',
    'Get-DbaDbMasterKey',
    'Get-DbaSchemaChangeHistory',
    'Get-DbaServerAudit',
    'Get-DbaServerAuditSpecification',
    'Get-DbaProductKey',
    'Get-DbatoolsLog',
    'Restore-DbaDbCertificate',
    'New-DbaDbCertificate',
    'New-DbaDbMasterKey',
    'New-DbaServiceMasterKey',
    'Remove-DbaDbCertificate',
    'Remove-DbaDbMasterKey',
    'New-DbaConnectionStringBuilder',
    'Get-DbaInstanceProperty',
    'Get-DbaInstanceUserOption',
    'New-DbaConnectionString',
    'Get-DbaAgentSchedule',
    'Read-DbaTraceFile',
    'Get-DbaServerInstallDate',
    'Backup-DbaDbMasterKey',
    'Get-DbaAgentJobHistory',
    'Get-DbaMaintenanceSolutionLog',
    'Invoke-DbaDbLogShipRecovery',
    'Find-DbaTrigger',
    'Find-DbaView',
    'Invoke-DbaDbUpgrade',
    'Get-DbaDbUser',
    'Get-DbaAgentLog',
    'Get-DbaDbMailLog',
    'Get-DbaDbMailHistory',
    'Get-DbaDbView',
    'Get-DbaDbUdf',
    'Get-DbaDbPartitionFunction',
    'Get-DbaDbPartitionScheme',
    'Get-DbaDefaultPath',
    'Get-DbaDbStoredProcedure',
    'Test-DbaDbCompression',
    'Mount-DbaDatabase',
    'Dismount-DbaDatabase',
    'Get-DbaAgReplica',
    'Get-DbaAgDatabase',
    'Get-DbaModule',
    'Sync-DbaLoginPermission',
    'New-DbaCredential',
    'Get-DbaFile',
    'Set-DbaDbCompression',
    'Get-DbaTraceFlag',
    'Invoke-DbaCycleErrorLog',
    'Get-DbaAvailableCollation',
    'Get-DbaUserPermission',
    'Get-DbaAgHadr',
    'Find-DbaSimilarTable',
    'Get-DbaTrace',
    'Get-DbaSuspectPage',
    'Get-DbaWaitStatistic',
    'Clear-DbaWaitStatistics',
    'Get-DbaTopResourceUsage',
    'New-DbaLogin',
    'Get-DbaAgListener',
    'Invoke-DbaDbClone',
    'Disable-DbaTraceFlag',
    'Enable-DbaTraceFlag',
    'Start-DbaAgentJob',
    'Stop-DbaAgentJob',
    'New-DbaAgentProxy',
    'Test-DbaDbLogShipStatus',
    'Get-DbaXESessionTarget',
    'New-DbaXESmartTargetResponse',
    'New-DbaXESmartTarget',
    'Get-DbaDbVirtualLogFile',
    'Get-DbaBackupInformation',
    'Start-DbaXESession',
    'Stop-DbaXESession',
    'Set-DbaDbRecoveryModel',
    'Get-DbaDbRecoveryModel',
    'Get-DbaWaitingTask',
    'Remove-DbaDbUser',
    'Get-DbaDump',
    'Invoke-DbaAdvancedRestore',
    'Format-DbaBackupInformation',
    'Get-DbaAgentJobStep',
    'Test-DbaBackupInformation',
    'Invoke-DbaBalanceDataFiles',
    'Select-DbaBackupInformation',
    'Publish-DbaDacPackage',
    'Copy-DbaDbTableData',
    'Invoke-DbaQuery',
    'Remove-DbaLogin',
    'Get-DbaAgentJobCategory',
    'New-DbaAgentJobCategory',
    'Remove-DbaAgentJobCategory',
    'Set-DbaAgentJobCategory',
    'Get-DbaDbRole',
    'Get-DbaServerRole',
    'Find-DbaBackup',
    'Remove-DbaXESession',
    'New-DbaXESession',
    'Get-DbaXEStore',
    'New-DbaXESmartTableWriter',
    'New-DbaXESmartReplay',
    'New-DbaXESmartEmail',
    'New-DbaXESmartQueryExec',
    'Start-DbaXESmartTarget',
    'Get-DbaOrphanUser',
    'Get-DbaOpenTransaction',
    'Get-DbaDbLogShipError',
    'Test-DbaBuild',
    'Get-DbaXESessionTemplate',
    'ConvertTo-DbaXESession',
    'Start-DbaTrace',
    'Stop-DbaTrace',
    'Remove-DbaTrace',
    'Set-DbaLogin',
    'Copy-DbaXESessionTemplate',
    'Get-DbaXEObject',
    'ConvertTo-DbaDataTable',
    'Find-DbaDisabledIndex',
    'Get-DbaXESmartTarget',
    'Remove-DbaXESmartTarget',
    'Stop-DbaXESmartTarget',
    'Get-DbaCmsRegServerGroup',
    'New-DbaDbUser',
    'Measure-DbaDiskSpaceRequirement',
    'New-DbaXESmartCsvWriter',
    'Invoke-DbaXeReplay',
    'Find-DbaInstance',
    'Test-DbaDiskSpeed',
    'Get-DbaDbExtentDiff',
    'Read-DbaAuditFile',
    'Get-DbaDbCompression',
    'Invoke-DbaDbDecryptObject',
    'Get-DbaDbForeignKey',
    'Get-DbaDbCheckConstraint',
    'Set-DbaAgentAlert',
    'Get-DbaWaitResource',
    'Get-DbaDbPageInfo',
    'Get-DbaConnection',
    'Test-DbaLoginPassword',
    'Get-DbaErrorLogConfig',
    'Set-DbaErrorLogConfig',
    'Get-DbaPlanCache',
    'Clear-DbaPlanCache',
    'ConvertTo-DbaTimeline',
    'Get-DbaDbMail',
    'Get-DbaDbMailAccount',
    'Get-DbaDbMailProfile',
    'Get-DbaDbMailConfig',
    'Get-DbaDbMailServer',
    'Get-DbaResourceGovernor',
    'Get-DbaRgResourcePool',
    'Get-DbaRgWorkloadGroup',
    'Get-DbaRgClassifierFunction',
    'Export-DbaInstance',
    'Invoke-DbatoolsRenameHelper',
    'Measure-DbatoolsImport',
    'Get-DbaDeprecatedFeature',
    'Test-DbaDeprecatedFeature'
    'Get-DbaDbFeatureUsage',
    'Stop-DbaEndpoint',
    'Start-DbaEndpoint',
    'Set-DbaDbMirror',
    'Repair-DbaDbMirror',
    'Remove-DbaEndpoint',
    'Remove-DbaDbMirrorMonitor',
    'Remove-DbaDbMirror',
    'New-DbaEndpoint',
    'Invoke-DbaDbMirroring',
    'Invoke-DbaDbMirrorFailover',
    'Get-DbaDbMirrorMonitor',
    'Get-DbaDbMirror',
    'Add-DbaDbMirrorMonitor',
    'Test-DbaEndpoint',
    'Get-DbaDbSharePoint',
    'Get-DbaDbMemoryUsage',
    'Clear-DbaLatchStatistics',
    'Get-DbaCpuRingBuffer',
    'Get-DbaIoLatency',
    'Get-DbaLatchStatistic',
    'Get-DbaSpinLockStatistic',
    'Add-DbaAgDatabase',
    'Add-DbaAgListener',
    'Add-DbaAgReplica',
    'Grant-DbaAgPermission',
    'Invoke-DbaAgFailover',
    'Join-DbaAvailabilityGroup',
    'New-DbaAvailabilityGroup',
    'Remove-DbaAgDatabase',
    'Remove-DbaAgListener',
    'Remove-DbaAvailabilityGroup',
    'Revoke-DbaAgPermission',
    'Get-DbaDbCompatibility',
    'Set-DbaDbCompatibility',
    'Invoke-DbatoolsFormatter',
    'Remove-DbaAgReplica',
    'Resume-DbaAgDbDataMovement',
    'Set-DbaAgListener',
    'Set-DbaAgReplica',
    'Set-DbaAvailabilityGroup',
    'Set-DbaEndpoint',
    'Suspend-DbaAgDbDataMovement',
    'Sync-DbaAvailabilityGroup',
    'Get-DbaMemoryCondition',
    'Remove-DbaDbBackupRestoreHistory',
    'New-DbaDatabase'
    'New-DbaDacOption',
    'Get-DbaDbccHelp',
    'Get-DbaDbccMemoryStatus',
    'Get-DbaDbccProcCache',
    'Get-DbaDbccUserOption',
    'Get-DbaAgentServer',
    'Set-DbaAgentServer',
    'Invoke-DbaDbccFreeCache'
    'Export-DbatoolsConfig',
    'Import-DbatoolsConfig',
    'Reset-DbatoolsConfig',
    'Unregister-DbatoolsConfig',
    'Join-DbaPath',
    'Resolve-DbaPath',
    'Import-DbaCsv'
)

$script:noncoresmo = @(
    # SMO issues
    'Export-DbaUser',
    'Get-DbaSsisExecutionHistory',
    'Get-DbaRepDistributor',
    'Get-DbaCmsRegServerStore',
    'Copy-DbaPolicyManagement',
    'Copy-DbaDataCollector',
    'Get-DbaCmsRegServer',
    'Copy-DbaSsisCatalog',
    'New-DbaSsisCatalog',
    'Get-DbaSsisEnvironmentVariable',
    'Get-DbaPbmCategory',
    'Get-DbaPbmCategorySubscription',
    'Get-DbaPbmCondition',
    'Get-DbaPbmObjectSet',
    'Get-DbaPbmPolicy',
    'Get-DbaPbmStore',
    'Add-DbaCmsRegServer',
    'Add-DbaCmsRegServerGroup',
    'Export-DbaCmsRegServer',
    'Import-DbaCmsRegServer',
    'Move-DbaCmsRegServer',
    'Move-DbaCmsRegServerGroup',
    'Remove-DbaCmsRegServer',
    'Remove-DbaCmsRegServerGroup',
    'Get-DbaRepPublication',
    'Test-DbaRepLatency',
    'Export-DbaRepServerSetting',
    'Get-DbaRepServer'
)
$script:windowsonly = @(
    # solvable filesystem issues or other workarounds
    'Copy-DbaBackupDevice',
    'Install-DbaSqlWatch',
    'Uninstall-DbaSqlWatch',
    'Get-DbaRegistryRoot',
    'Install-DbaMaintenanceSolution',
    'New-DbatoolsSupportPackage',
    'Export-DbaScript',
    'Get-DbaAgentJobOutputFile',
    'Set-DbaAgentJobOutputFile',
    'Get-DbaBuildReference',
    'New-DbaDacProfile'
    'Import-DbaXESessionTemplate',
    'Export-DbaXESessionTemplate',
    'Import-DbaSpConfigure',
    'Export-DbaSpConfigure'
    'Update-Dbatools',
    'Install-DbaWhoIsActive',
    'Install-DbaFirstResponderKit',
    'Read-DbaXEFile',
    'Watch-DbaXESession',
    'Test-DbaMaxMemory', # can be fixed by not testing remote when linux is detected
    'Rename-DbaDatabase', # can maybebe fixed by not remoting when linux is detected
    # CM and Windows functions
    'Update-DbaInstance',
    'Invoke-DbaPfRelog',
    'Get-DbaPfDataCollectorCounter',
    'Get-DbaPfDataCollectorCounterSample',
    'Get-DbaPfDataCollector',
    'Get-DbaPfDataCollectorSet',
    'Start-DbaPfDataCollectorSet',
    'Stop-DbaPfDataCollectorSet',
    'Export-DbaPfDataCollectorSetTemplate',
    'Get-DbaPfDataCollectorSetTemplate',
    'Import-DbaPfDataCollectorSetTemplate',
    'Remove-DbaPfDataCollectorSet',
    'Add-DbaPfDataCollectorCounter',
    'Remove-DbaPfDataCollectorCounter',
    'Get-DbaPfAvailableCounter',
    'Export-DbaXECsv',
    'Get-DbaOperatingSystem',
    'Get-DbaComputerSystem',
    'Set-DbaPrivilege',
    'Set-DbaTcpPort',
    'Set-DbaCmConnection',
    'Get-DbaUptime',
    'Get-DbaMemoryUsage',
    'Clear-DbaConnectionPool',
    'Get-DbaLocaleSetting',
    'Get-DbaFilestream',
    'Enable-DbaFilestream',
    'Disable-DbaFilestream',
    'Get-DbaCpuUsage',
    'Get-DbaPowerPlan',
    'Get-DbaWsfcAvailableDisk',
    'Get-DbaWsfcCluster',
    'Get-DbaWsfcDisk',
    'Get-DbaWsfcNetwork',
    'Get-DbaWsfcNetworkInterface',
    'Get-DbaWsfcNode',
    'Get-DbaWsfcResource',
    'Get-DbaWsfcResourceType',
    'Get-DbaWsfcRole',
    'Get-DbaWsfcSharedVolume',
    'Export-DbaCredential',
    'Export-DbaLinkedServer',
    'Get-DbaFeature',
    'Update-DbaServiceAccount',
    'Remove-DbaClientAlias',
    'Disable-DbaAgHadr',
    'Enable-DbaAgHadr',
    'Stop-DbaService',
    'Start-DbaService',
    'Restart-DbaService',
    'New-DbaClientAlias',
    'Get-DbaClientAlias',
    'Remove-DbaNetworkCertificate',
    'Enable-DbaForceNetworkEncryption',
    'Disable-DbaForceNetworkEncryption',
    'Get-DbaForceNetworkEncryption',
    'Remove-DbaComputerCertificate',
    'New-DbaComputerCertificate',
    'Get-DbaComputerCertificate',
    'Add-DbaComputerCertificate',
    'Get-DbaNetworkCertificate',
    'Set-DbaNetworkCertificate',
    'Invoke-DbaDbLogShipping',
    'New-DbaCmConnection',
    'Get-DbaCmConnection',
    'Remove-DbaCmConnection',
    'Test-DbaCmConnection',
    'Get-DbaCmObject',
    'Set-DbaStartupParameter',
    'Get-DbaNetworkActivity',
    'Get-DbaServerProtocol'
    'Watch-DbaUpdate',
    'Uninstall-DbaWatchUpdate',
    'Install-DbaWatchUpdate',
    'Get-DbaPrivilege',
    'Get-DbaMsdtc',
    'Get-DbaPageFileSetting',
    'Copy-DbaCredential',
    'Test-DbaConnection',
    'Reset-DbaAdmin',
    'Copy-DbaLinkedServer',
    'Get-DbaDiskSpace',
    'Test-DbaDiskAllocation',
    'Test-DbaPowerPlan',
    'Set-DbaPowerPlan',
    'Test-DbaDiskAlignment',
    'Get-DbaStartupParameter',
    'Get-DbaSpn',
    'Test-DbaSpn',
    'Set-DbaSpn',
    'Remove-DbaSpn',
    'Get-DbaService',
    'Get-DbaClientProtocol',
    'Get-DbaWindowsLog',
    # WPF
    'Show-DbaServerFileSystem',
    'Show-DbaDbList',
    # AD?
    'Test-DbaWindowsLogin',
    'Find-DbaLoginInGroup',
    # 3rd party non-core DLL or exe
    'Export-DbaDacPackage', # relies on sqlpackage.exe
    # Config system
    'Get-DbatoolsConfig',
    'Get-DbatoolsConfigValue',
    'Set-DbatoolsConfig',
    'Register-DbatoolsConfig',
    # Unknown
    'Get-DbaErrorLog',
    'Get-DbaManagementObject',
    'Test-DbaManagementObject'
)

# If a developer or appveyor calls the psm1 directly, they want all functions
# So do not explicity export because everything else is then implicity excluded
if (-not $script:multiFileImport) {
    if (($PSVersionTable.Keys -contains "Platform")) {
        if ($PSVersionTable.Platform -ne "Win32NT") {
            Export-ModuleMember -Function $script:xplat
        } else {
            Export-ModuleMember -Function $script:xplat
            Export-ModuleMember -Function $script:windowsonly
        }
    } else {
        Export-ModuleMember -Function $script:xplat
        Export-ModuleMember -Function $script:windowsonly
        Export-ModuleMember -Function $script:noncoresmo
    }

    Export-ModuleMember -Alias $script:renames
    Export-ModuleMember -Alias $forever
    
    Export-ModuleMember -Cmdlet Select-DbaObject, Set-DbatoolsConfig

    Write-ImportTime -Text "Exported module member"
}

$timeout = 20000
$timeSpent = 0
while ($script:smoRunspace.Runspace.RunspaceAvailability -eq 'Busy') {
    Start-Sleep -Milliseconds 50
    $timeSpent = $timeSpent + 50

    if ($timeSpent -ge $timeout) {
        Write-Warning @"
The module import has hit a timeout while waiting for some background tasks to finish.
This may result in some commands not working as intended.
This should not happen under reasonable circumstances, please file an issue at:
https://github.com/sqlcollaborative/dbatools/issues
Or contact us directly in the #dbatools channel of the SQL Server Community Slack Channel:
https://dbatools.io/slack/
Timeout waiting for temporary runspaces reached! The Module import will complete, but some things may not work as intended
"@
        $global:smoRunspace = $script:smoRunspace
        break
    }
}

if ($script:smoRunspace) {
    $script:smoRunspace.Runspace.Close()
    $script:smoRunspace.Runspace.Dispose()
    $script:smoRunspace.Dispose()
    Remove-Variable -Name smoRunspace -Scope script
}
Write-ImportTime -Text "Waiting for runspaces to finish"

if ($PSCommandPath -like "*.psm1") {
    Update-TypeData -AppendPath (Resolve-Path -Path "$script:PSModuleRoot\xml\dbatools.Types.ps1xml")
    Write-ImportTime -Text "Loaded type extensions"
}
#. Import-ModuleFile "$script:PSModuleRoot\bin\type-extensions.ps1"
#Write-ImportTime -Text "Loaded type extensions"

[Sqlcollaborative.Dbatools.dbaSystem.SystemHost]::ModuleImported = $true;

if (Get-Module -Name sqlserver, sqlps) {
    if (Get-DbatoolsConfigValue -FullName Import.SqlpsCheck) {
        Write-Warning -Message 'SQLPS or SqlServer was previously imported during this session. If you encounter weird issues with dbatools, please restart PowerShell, then import dbatools without loading SQLPS or SqlServer first.'
        Write-Warning -Message 'To disable this message, type: Set-DbatoolsConfig -Name Import.SqlpsCheck -Value $false -PassThru | Register-DbatoolsConfig'
    }
}

#endregion Post-Import Cleanup
# SIG # Begin signature block
# MIIcYgYJKoZIhvcNAQcCoIIcUzCCHE8CAQExCzAJBgUrDgMCGgUAMGkGCisGAQQB
# gjcCAQSgWzBZMDQGCisGAQQBgjcCAR4wJgIDAQAABBAfzDtgWUsITrck0sYpfvNR
# AgEAAgEAAgEAAgEAAgEAMCEwCQYFKw4DAhoFAAQUrb2KBUiCUftt2vNcU+hail37
# xJ2ggheRMIIFGjCCBAKgAwIBAgIQAsF1KHTVwoQxhSrYoGRpyjANBgkqhkiG9w0B
# AQsFADByMQswCQYDVQQGEwJVUzEVMBMGA1UEChMMRGlnaUNlcnQgSW5jMRkwFwYD
# VQQLExB3d3cuZGlnaWNlcnQuY29tMTEwLwYDVQQDEyhEaWdpQ2VydCBTSEEyIEFz
# c3VyZWQgSUQgQ29kZSBTaWduaW5nIENBMB4XDTE3MDUwOTAwMDAwMFoXDTIwMDUx
# MzEyMDAwMFowVzELMAkGA1UEBhMCVVMxETAPBgNVBAgTCFZpcmdpbmlhMQ8wDQYD
# VQQHEwZWaWVubmExETAPBgNVBAoTCGRiYXRvb2xzMREwDwYDVQQDEwhkYmF0b29s
# czCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAI8ng7JxnekL0AO4qQgt
# Kr6p3q3SNOPh+SUZH+SyY8EA2I3wR7BMoT7rnZNolTwGjUXn7bRC6vISWg16N202
# 1RBWdTGW2rVPBVLF4HA46jle4hcpEVquXdj3yGYa99ko1w2FOWzLjKvtLqj4tzOh
# K7wa/Gbmv0Si/FU6oOmctzYMI0QXtEG7lR1HsJT5kywwmgcjyuiN28iBIhT6man0
# Ib6xKDv40PblKq5c9AFVldXUGVeBJbLhcEAA1nSPSLGdc7j4J2SulGISYY7ocuX3
# tkv01te72Mv2KkqqpfkLEAQjXgtM0hlgwuc8/A4if+I0YtboCMkVQuwBpbR9/6ys
# Z+sCAwEAAaOCAcUwggHBMB8GA1UdIwQYMBaAFFrEuXsqCqOl6nEDwGD5LfZldQ5Y
# MB0GA1UdDgQWBBRcxSkFqeA3vvHU0aq2mVpFRSOdmjAOBgNVHQ8BAf8EBAMCB4Aw
# EwYDVR0lBAwwCgYIKwYBBQUHAwMwdwYDVR0fBHAwbjA1oDOgMYYvaHR0cDovL2Ny
# bDMuZGlnaWNlcnQuY29tL3NoYTItYXNzdXJlZC1jcy1nMS5jcmwwNaAzoDGGL2h0
# dHA6Ly9jcmw0LmRpZ2ljZXJ0LmNvbS9zaGEyLWFzc3VyZWQtY3MtZzEuY3JsMEwG
# A1UdIARFMEMwNwYJYIZIAYb9bAMBMCowKAYIKwYBBQUHAgEWHGh0dHBzOi8vd3d3
# LmRpZ2ljZXJ0LmNvbS9DUFMwCAYGZ4EMAQQBMIGEBggrBgEFBQcBAQR4MHYwJAYI
# KwYBBQUHMAGGGGh0dHA6Ly9vY3NwLmRpZ2ljZXJ0LmNvbTBOBggrBgEFBQcwAoZC
# aHR0cDovL2NhY2VydHMuZGlnaWNlcnQuY29tL0RpZ2lDZXJ0U0hBMkFzc3VyZWRJ
# RENvZGVTaWduaW5nQ0EuY3J0MAwGA1UdEwEB/wQCMAAwDQYJKoZIhvcNAQELBQAD
# ggEBANuBGTbzCRhgG0Th09J0m/qDqohWMx6ZOFKhMoKl8f/l6IwyDrkG48JBkWOA
# QYXNAzvp3Ro7aGCNJKRAOcIjNKYef/PFRfFQvMe07nQIj78G8x0q44ZpOVCp9uVj
# sLmIvsmF1dcYhOWs9BOG/Zp9augJUtlYpo4JW+iuZHCqjhKzIc74rEEiZd0hSm8M
# asshvBUSB9e8do/7RhaKezvlciDaFBQvg5s0fICsEhULBRhoyVOiUKUcemprPiTD
# xh3buBLuN0bBayjWmOMlkG1Z6i8DUvWlPGz9jiBT3ONBqxXfghXLL6n8PhfppBhn
# daPQO8+SqF5rqrlyBPmRRaTz2GQwggUwMIIEGKADAgECAhAECRgbX9W7ZnVTQ7Vv
# lVAIMA0GCSqGSIb3DQEBCwUAMGUxCzAJBgNVBAYTAlVTMRUwEwYDVQQKEwxEaWdp
# Q2VydCBJbmMxGTAXBgNVBAsTEHd3dy5kaWdpY2VydC5jb20xJDAiBgNVBAMTG0Rp
# Z2lDZXJ0IEFzc3VyZWQgSUQgUm9vdCBDQTAeFw0xMzEwMjIxMjAwMDBaFw0yODEw
# MjIxMjAwMDBaMHIxCzAJBgNVBAYTAlVTMRUwEwYDVQQKEwxEaWdpQ2VydCBJbmMx
# GTAXBgNVBAsTEHd3dy5kaWdpY2VydC5jb20xMTAvBgNVBAMTKERpZ2lDZXJ0IFNI
# QTIgQXNzdXJlZCBJRCBDb2RlIFNpZ25pbmcgQ0EwggEiMA0GCSqGSIb3DQEBAQUA
# A4IBDwAwggEKAoIBAQD407Mcfw4Rr2d3B9MLMUkZz9D7RZmxOttE9X/lqJ3bMtdx
# 6nadBS63j/qSQ8Cl+YnUNxnXtqrwnIal2CWsDnkoOn7p0WfTxvspJ8fTeyOU5JEj
# lpB3gvmhhCNmElQzUHSxKCa7JGnCwlLyFGeKiUXULaGj6YgsIJWuHEqHCN8M9eJN
# YBi+qsSyrnAxZjNxPqxwoqvOf+l8y5Kh5TsxHM/q8grkV7tKtel05iv+bMt+dDk2
# DZDv5LVOpKnqagqrhPOsZ061xPeM0SAlI+sIZD5SlsHyDxL0xY4PwaLoLFH3c7y9
# hbFig3NBggfkOItqcyDQD2RzPJ6fpjOp/RnfJZPRAgMBAAGjggHNMIIByTASBgNV
# HRMBAf8ECDAGAQH/AgEAMA4GA1UdDwEB/wQEAwIBhjATBgNVHSUEDDAKBggrBgEF
# BQcDAzB5BggrBgEFBQcBAQRtMGswJAYIKwYBBQUHMAGGGGh0dHA6Ly9vY3NwLmRp
# Z2ljZXJ0LmNvbTBDBggrBgEFBQcwAoY3aHR0cDovL2NhY2VydHMuZGlnaWNlcnQu
# Y29tL0RpZ2lDZXJ0QXNzdXJlZElEUm9vdENBLmNydDCBgQYDVR0fBHoweDA6oDig
# NoY0aHR0cDovL2NybDQuZGlnaWNlcnQuY29tL0RpZ2lDZXJ0QXNzdXJlZElEUm9v
# dENBLmNybDA6oDigNoY0aHR0cDovL2NybDMuZGlnaWNlcnQuY29tL0RpZ2lDZXJ0
# QXNzdXJlZElEUm9vdENBLmNybDBPBgNVHSAESDBGMDgGCmCGSAGG/WwAAgQwKjAo
# BggrBgEFBQcCARYcaHR0cHM6Ly93d3cuZGlnaWNlcnQuY29tL0NQUzAKBghghkgB
# hv1sAzAdBgNVHQ4EFgQUWsS5eyoKo6XqcQPAYPkt9mV1DlgwHwYDVR0jBBgwFoAU
# Reuir/SSy4IxLVGLp6chnfNtyA8wDQYJKoZIhvcNAQELBQADggEBAD7sDVoks/Mi
# 0RXILHwlKXaoHV0cLToaxO8wYdd+C2D9wz0PxK+L/e8q3yBVN7Dh9tGSdQ9RtG6l
# jlriXiSBThCk7j9xjmMOE0ut119EefM2FAaK95xGTlz/kLEbBw6RFfu6r7VRwo0k
# riTGxycqoSkoGjpxKAI8LpGjwCUR4pwUR6F6aGivm6dcIFzZcbEMj7uo+MUSaJ/P
# QMtARKUT8OZkDCUIQjKyNookAv4vcn4c10lFluhZHen6dGRrsutmQ9qzsIzV6Q3d
# 9gEgzpkxYz0IGhizgZtPxpMQBvwHgfqL2vmCSfdibqFT+hKUGIUukpHqaGxEMrJm
# oecYpJpkUe8wggZqMIIFUqADAgECAhADAZoCOv9YsWvW1ermF/BmMA0GCSqGSIb3
# DQEBBQUAMGIxCzAJBgNVBAYTAlVTMRUwEwYDVQQKEwxEaWdpQ2VydCBJbmMxGTAX
# BgNVBAsTEHd3dy5kaWdpY2VydC5jb20xITAfBgNVBAMTGERpZ2lDZXJ0IEFzc3Vy
# ZWQgSUQgQ0EtMTAeFw0xNDEwMjIwMDAwMDBaFw0yNDEwMjIwMDAwMDBaMEcxCzAJ
# BgNVBAYTAlVTMREwDwYDVQQKEwhEaWdpQ2VydDElMCMGA1UEAxMcRGlnaUNlcnQg
# VGltZXN0YW1wIFJlc3BvbmRlcjCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoC
# ggEBAKNkXfx8s+CCNeDg9sYq5kl1O8xu4FOpnx9kWeZ8a39rjJ1V+JLjntVaY1sC
# SVDZg85vZu7dy4XpX6X51Id0iEQ7Gcnl9ZGfxhQ5rCTqqEsskYnMXij0ZLZQt/US
# s3OWCmejvmGfrvP9Enh1DqZbFP1FI46GRFV9GIYFjFWHeUhG98oOjafeTl/iqLYt
# WQJhiGFyGGi5uHzu5uc0LzF3gTAfuzYBje8n4/ea8EwxZI3j6/oZh6h+z+yMDDZb
# esF6uHjHyQYuRhDIjegEYNu8c3T6Ttj+qkDxss5wRoPp2kChWTrZFQlXmVYwk/PJ
# YczQCMxr7GJCkawCwO+k8IkRj3cCAwEAAaOCAzUwggMxMA4GA1UdDwEB/wQEAwIH
# gDAMBgNVHRMBAf8EAjAAMBYGA1UdJQEB/wQMMAoGCCsGAQUFBwMIMIIBvwYDVR0g
# BIIBtjCCAbIwggGhBglghkgBhv1sBwEwggGSMCgGCCsGAQUFBwIBFhxodHRwczov
# L3d3dy5kaWdpY2VydC5jb20vQ1BTMIIBZAYIKwYBBQUHAgIwggFWHoIBUgBBAG4A
# eQAgAHUAcwBlACAAbwBmACAAdABoAGkAcwAgAEMAZQByAHQAaQBmAGkAYwBhAHQA
# ZQAgAGMAbwBuAHMAdABpAHQAdQB0AGUAcwAgAGEAYwBjAGUAcAB0AGEAbgBjAGUA
# IABvAGYAIAB0AGgAZQAgAEQAaQBnAGkAQwBlAHIAdAAgAEMAUAAvAEMAUABTACAA
# YQBuAGQAIAB0AGgAZQAgAFIAZQBsAHkAaQBuAGcAIABQAGEAcgB0AHkAIABBAGcA
# cgBlAGUAbQBlAG4AdAAgAHcAaABpAGMAaAAgAGwAaQBtAGkAdAAgAGwAaQBhAGIA
# aQBsAGkAdAB5ACAAYQBuAGQAIABhAHIAZQAgAGkAbgBjAG8AcgBwAG8AcgBhAHQA
# ZQBkACAAaABlAHIAZQBpAG4AIABiAHkAIAByAGUAZgBlAHIAZQBuAGMAZQAuMAsG
# CWCGSAGG/WwDFTAfBgNVHSMEGDAWgBQVABIrE5iymQftHt+ivlcNK2cCzTAdBgNV
# HQ4EFgQUYVpNJLZJMp1KKnkag0v0HonByn0wfQYDVR0fBHYwdDA4oDagNIYyaHR0
# cDovL2NybDMuZGlnaWNlcnQuY29tL0RpZ2lDZXJ0QXNzdXJlZElEQ0EtMS5jcmww
# OKA2oDSGMmh0dHA6Ly9jcmw0LmRpZ2ljZXJ0LmNvbS9EaWdpQ2VydEFzc3VyZWRJ
# RENBLTEuY3JsMHcGCCsGAQUFBwEBBGswaTAkBggrBgEFBQcwAYYYaHR0cDovL29j
# c3AuZGlnaWNlcnQuY29tMEEGCCsGAQUFBzAChjVodHRwOi8vY2FjZXJ0cy5kaWdp
# Y2VydC5jb20vRGlnaUNlcnRBc3N1cmVkSURDQS0xLmNydDANBgkqhkiG9w0BAQUF
# AAOCAQEAnSV+GzNNsiaBXJuGziMgD4CH5Yj//7HUaiwx7ToXGXEXzakbvFoWOQCd
# 42yE5FpA+94GAYw3+puxnSR+/iCkV61bt5qwYCbqaVchXTQvH3Gwg5QZBWs1kBCg
# e5fH9j/n4hFBpr1i2fAnPTgdKG86Ugnw7HBi02JLsOBzppLA044x2C/jbRcTBu7k
# A7YUq/OPQ6dxnSHdFMoVXZJB2vkPgdGZdA0mxA5/G7X1oPHGdwYoFenYk+VVFvC7
# Cqsc21xIJ2bIo4sKHOWV2q7ELlmgYd3a822iYemKC23sEhi991VUQAOSK2vCUcIK
# SK+w1G7g9BQKOhvjjz3Kr2qNe9zYRDCCBs0wggW1oAMCAQICEAb9+QOWA63qAArr
# Pye7uhswDQYJKoZIhvcNAQEFBQAwZTELMAkGA1UEBhMCVVMxFTATBgNVBAoTDERp
# Z2lDZXJ0IEluYzEZMBcGA1UECxMQd3d3LmRpZ2ljZXJ0LmNvbTEkMCIGA1UEAxMb
# RGlnaUNlcnQgQXNzdXJlZCBJRCBSb290IENBMB4XDTA2MTExMDAwMDAwMFoXDTIx
# MTExMDAwMDAwMFowYjELMAkGA1UEBhMCVVMxFTATBgNVBAoTDERpZ2lDZXJ0IElu
# YzEZMBcGA1UECxMQd3d3LmRpZ2ljZXJ0LmNvbTEhMB8GA1UEAxMYRGlnaUNlcnQg
# QXNzdXJlZCBJRCBDQS0xMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEA
# 6IItmfnKwkKVpYBzQHDSnlZUXKnE0kEGj8kz/E1FkVyBn+0snPgWWd+etSQVwpi5
# tHdJ3InECtqvy15r7a2wcTHrzzpADEZNk+yLejYIA6sMNP4YSYL+x8cxSIB8HqIP
# kg5QycaH6zY/2DDD/6b3+6LNb3Mj/qxWBZDwMiEWicZwiPkFl32jx0PdAug7Pe2x
# QaPtP77blUjE7h6z8rwMK5nQxl0SQoHhg26Ccz8mSxSQrllmCsSNvtLOBq6thG9I
# hJtPQLnxTPKvmPv2zkBdXPao8S+v7Iki8msYZbHBc63X8djPHgp0XEK4aH631XcK
# J1Z8D2KkPzIUYJX9BwSiCQIDAQABo4IDejCCA3YwDgYDVR0PAQH/BAQDAgGGMDsG
# A1UdJQQ0MDIGCCsGAQUFBwMBBggrBgEFBQcDAgYIKwYBBQUHAwMGCCsGAQUFBwME
# BggrBgEFBQcDCDCCAdIGA1UdIASCAckwggHFMIIBtAYKYIZIAYb9bAABBDCCAaQw
# OgYIKwYBBQUHAgEWLmh0dHA6Ly93d3cuZGlnaWNlcnQuY29tL3NzbC1jcHMtcmVw
# b3NpdG9yeS5odG0wggFkBggrBgEFBQcCAjCCAVYeggFSAEEAbgB5ACAAdQBzAGUA
# IABvAGYAIAB0AGgAaQBzACAAQwBlAHIAdABpAGYAaQBjAGEAdABlACAAYwBvAG4A
# cwB0AGkAdAB1AHQAZQBzACAAYQBjAGMAZQBwAHQAYQBuAGMAZQAgAG8AZgAgAHQA
# aABlACAARABpAGcAaQBDAGUAcgB0ACAAQwBQAC8AQwBQAFMAIABhAG4AZAAgAHQA
# aABlACAAUgBlAGwAeQBpAG4AZwAgAFAAYQByAHQAeQAgAEEAZwByAGUAZQBtAGUA
# bgB0ACAAdwBoAGkAYwBoACAAbABpAG0AaQB0ACAAbABpAGEAYgBpAGwAaQB0AHkA
# IABhAG4AZAAgAGEAcgBlACAAaQBuAGMAbwByAHAAbwByAGEAdABlAGQAIABoAGUA
# cgBlAGkAbgAgAGIAeQAgAHIAZQBmAGUAcgBlAG4AYwBlAC4wCwYJYIZIAYb9bAMV
# MBIGA1UdEwEB/wQIMAYBAf8CAQAweQYIKwYBBQUHAQEEbTBrMCQGCCsGAQUFBzAB
# hhhodHRwOi8vb2NzcC5kaWdpY2VydC5jb20wQwYIKwYBBQUHMAKGN2h0dHA6Ly9j
# YWNlcnRzLmRpZ2ljZXJ0LmNvbS9EaWdpQ2VydEFzc3VyZWRJRFJvb3RDQS5jcnQw
# gYEGA1UdHwR6MHgwOqA4oDaGNGh0dHA6Ly9jcmwzLmRpZ2ljZXJ0LmNvbS9EaWdp
# Q2VydEFzc3VyZWRJRFJvb3RDQS5jcmwwOqA4oDaGNGh0dHA6Ly9jcmw0LmRpZ2lj
# ZXJ0LmNvbS9EaWdpQ2VydEFzc3VyZWRJRFJvb3RDQS5jcmwwHQYDVR0OBBYEFBUA
# EisTmLKZB+0e36K+Vw0rZwLNMB8GA1UdIwQYMBaAFEXroq/0ksuCMS1Ri6enIZ3z
# bcgPMA0GCSqGSIb3DQEBBQUAA4IBAQBGUD7Jtygkpzgdtlspr1LPUukxR6tWXHvV
# DQtBs+/sdR90OPKyXGGinJXDUOSCuSPRujqGcq04eKx1XRcXNHJHhZRW0eu7NoR3
# zCSl8wQZVann4+erYs37iy2QwsDStZS9Xk+xBdIOPRqpFFumhjFiqKgz5Js5p8T1
# zh14dpQlc+Qqq8+cdkvtX8JLFuRLcEwAiR78xXm8TBJX/l/hHrwCXaj++wc4Tw3G
# XZG5D2dFzdaD7eeSDY2xaYxP+1ngIw/Sqq4AfO6cQg7PkdcntxbuD8O9fAqg7iwI
# VYUiuOsYGk38KiGtSTGDR5V3cdyxG0tLHBCcdxTBnU8vWpUIKRAmMYIEOzCCBDcC
# AQEwgYYwcjELMAkGA1UEBhMCVVMxFTATBgNVBAoTDERpZ2lDZXJ0IEluYzEZMBcG
# A1UECxMQd3d3LmRpZ2ljZXJ0LmNvbTExMC8GA1UEAxMoRGlnaUNlcnQgU0hBMiBB
# c3N1cmVkIElEIENvZGUgU2lnbmluZyBDQQIQAsF1KHTVwoQxhSrYoGRpyjAJBgUr
# DgMCGgUAoHgwGAYKKwYBBAGCNwIBDDEKMAigAoAAoQKAADAZBgkqhkiG9w0BCQMx
# DAYKKwYBBAGCNwIBBDAcBgorBgEEAYI3AgELMQ4wDAYKKwYBBAGCNwIBFTAjBgkq
# hkiG9w0BCQQxFgQUWUxohTTTSjd74XncoSLrsUngLDwwDQYJKoZIhvcNAQEBBQAE
# ggEATRAMqsMMi/H5JJSSoQcNilmCYeSWGWqYzil2gnKURKZWpjfiFjvfseFqKtNM
# z+KYDxPIsggHM1w57OTICDFJ3ELqHrOyo4cGv40Tj02QvG90fxg4OmVai7fVLrtF
# g5X8iqcdHeiloHK7Qf/lsnyA5rhllc2wEupCXFnRQmDlTrPvCC6BAJWwzdpVC/k6
# y1EaxmX0bRqWqOYbkmdLdcbhy7Ycb5dsiyY8zn503nlg/RAQY56KtHw2FBwIIRIq
# SrjzzpRk1rrCBMvw90PPxgJQwdSgCYY56E0h3Gh6mi+cOIc7Xmn0bbNN4PnMp6pN
# Oe+emQRLRnC0xCGAQfmXRL5Fa6GCAg8wggILBgkqhkiG9w0BCQYxggH8MIIB+AIB
# ATB2MGIxCzAJBgNVBAYTAlVTMRUwEwYDVQQKEwxEaWdpQ2VydCBJbmMxGTAXBgNV
# BAsTEHd3dy5kaWdpY2VydC5jb20xITAfBgNVBAMTGERpZ2lDZXJ0IEFzc3VyZWQg
# SUQgQ0EtMQIQAwGaAjr/WLFr1tXq5hfwZjAJBgUrDgMCGgUAoF0wGAYJKoZIhvcN
# AQkDMQsGCSqGSIb3DQEHATAcBgkqhkiG9w0BCQUxDxcNMTgxMjA3MTAzMzMzWjAj
# BgkqhkiG9w0BCQQxFgQUaCLcwaKzXcwvW9xWE+yo0ycHlcQwDQYJKoZIhvcNAQEB
# BQAEggEAIIxtWRWutpqMKARBKY11bfAd9J+3jQ6hXn8w95yNI0by3sWnuSnSb22p
# VAjm2MCa0iBFOinWpl8wlsthAEdJqcQR0n0ID/TH35FDN+wKUpMUQCt8G5Cy9Cj8
# FOMHPhTtZrn9aAEC4/MvLcXnAd/GSkpjJgtyi3kb/37WzKFNw1b7ltE/0lLfJBGZ
# v3Z9kccCyG1Q2zR80gnzU6CZhXEmhMUL9GlqkOE82m91RkGtbq3gqsKPsOaN5YBR
# mejBfK7oStSkxUZraEndGHRW31KpsJv4GjPsF94BwY3Ix96eZNp+Hmqflcq3eIlA
# B7VRHWhusxeR3ChY9TuUm3Gn/70Fyg==
# SIG # End signature block

tools\dbatools\en-us\about_dbatools.help.txt

TOPIC
	about_dbatools
	
SHORT DESCRIPTION
	Gives on overview over the advanced dbatools topics
	
LONG DESCRIPTION
	Welcome to the dbatools help central.
	This guide tries to show you how to best get help.
	
	Over the project's lifetime, dbatools has grown explosively and many
	features were added to cope with the sheer scale of this project. Thus,
	dbatools has become highly complex as far as a PowerShell module goes. With
	great complexity comes a great need for documentation.
	Which is where this article comes in.
	
	
	#-------------------------------------------------------------------------#
	#                           Table of Contents                             #
	#-------------------------------------------------------------------------#

	- Getting Help
	- Import Options
	
	
	#-------------------------------------------------------------------------#
	#                              Getting Help                               #
	#-------------------------------------------------------------------------#
	
	When something breaks unexpectedly, you'll probably want help. We have put
	together a guide to help you through our process:
	
	  Get-Help about_dbatools_support
	
	
	#-------------------------------------------------------------------------#
	#                             Import Options                              #
	#-------------------------------------------------------------------------#
	
	When designing the way the module is imported, we had to make several trade-
	offs. Not every decision we made is always the right way for everybody
	however, so we set up some options that let you decide, which way you
	prefer. Basically, we had to balance import time vs. security policies and
	resource cost. This guide explains what the settings do and how to set them:
	
	  Get-Help about_dbatools_importoptions
	
	
KEYWORDS
	dbatools general

tools\dbatools\en-us\about_dbatools_importoptions.help.txt

TOPIC
	about_dbatools_importoptions
	
SHORT DESCRIPTION
	Explains the various options of how to import dbatools.
	
LONG DESCRIPTION
	Welcome to our guide to importing dbatools. Since one glove fits NOT all,
	we have implemented various ways in which you can import the module. These
	options may have security implications, may be more aimed at developers, or
	may reduce resource need in return for slower import times.
	
	All these settings can be set by variable or registry key, making it
	possible to enforce these settings by policy.
	
	
	#-------------------------------------------------------------------------#
	#                                  Index                                  #
	#-------------------------------------------------------------------------#
	
	- Configuring settings
	- Serial import
	- Dotsource on import
	- Dll Copy on import
	- Build dbatools library on import
	
	
	#-------------------------------------------------------------------------#
	#                          Configuring settings                           #
	#-------------------------------------------------------------------------#
	
	Import settings can be set at three levels:
	
	- Per Script
	- Per User
	- Per Computer
	
	Per Script:
	When configured per script, declare the respective 'dbatools_XXXXX' variable
	to $true before import. The variable name is listed with the description of
	the individual options.
	Note that this must be done BEFORE importing dbatools. If the script is
	called from a powershell process that has dbatools already installed, it
	will be ignored and have no effect.
	
	Per User:
	The individual settings are DWORD properties found in the following key:
	
	  HKCU:\SOFTWARE\Microsoft\WindowsPowerShell\dbatools\System
	
	The value name is listed with the description of the individual options.
	Set the value to '1' in order to enable the option.
	
	Per Computer:
	The individual settings are DWORD properties found in the following key:
	
	  HKLM:\SOFTWARE\Microsoft\WindowsPowerShell\dbatools\System
	
	The value name is listed with the description of the individual options.
	Set the value to '1' in order to enable the option.
	
	Note on competing settings:
	This system works on an anybody-in basis. Meaning that if any single setting
	enables an import option, the others cannot disable the setting. A script
	that has been set to import serial will do so, even if the registry settings
	are explicitly set to '0'.
	
	
	#-------------------------------------------------------------------------#
	#                              Serial import                              #
	#-------------------------------------------------------------------------#
	
	  $dbatools_serialimport = $true | SerialImport: 1
	
	In order to optimize import speed, dbatools loads its components in
	parallel. This places a heavy load on CPU however. Since import speed isn't
	that important on unattended scripts, it is recommended to enable serial
	import for them, avoiding CPU spikes.
	
	
	#-------------------------------------------------------------------------#
	#                           Dotsource on import                           #
	#-------------------------------------------------------------------------#
	
	  $dbatools_dotsourcemodule = $true | DoDotSource: 1
	
	When loading the module, we read the files to memory and import straight,
	rather than importing the individual script files using dotsourcing. This is
	faster at no extra resource cost, especially on older PowerShell versions.
	The downside however is that the individual files are not checked for valid
	signatures. Company policy may require enabling this for security
	compliance. It also is often enabled by developers, as it makes debugging
	easier.
	
	
	#-------------------------------------------------------------------------#
	#                           Dll Copy on import                            #
	#-------------------------------------------------------------------------#
	
	  $dbatools_copydllmode = $true | CopyDllMode: 1
	
	The module includes a large number of dll files. These files will be locked
	as long as a PowerShell console using the module is open. This makes it
	impossible to update the module into the same folder (as older versions of
	PowerShell will do). In order to support a proper update, we support copy-
	ing the dll files and importing them from a separate folder. With that,
	users can then use our Update-Dbatools command to update the module while it
	is imported.
	Enabling this setting significantly increases import time and can be a
	security issue, only enable it for updating the module.
	
	
	#-------------------------------------------------------------------------#
	#                    Build dbatools library on import                     #
	#-------------------------------------------------------------------------#
	
	  $dbatools_alwaysbuildlibrary = $true | AlwaysBuildLibrary: 1
	
	This is a pure developer feature. Setting this will compile the dbatools
	library on every import. This feature requires an installed Visual Studio.
	This allows fast iterative tests on the library, but has no production use.
	
	
KEYWORDS
	dbatools import

tools\dbatools\functions\Add-DbaDbMirrorMonitor.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Add-DbaDbMirrorMonitor {
    <#
    .SYNOPSIS
        Creates a database mirroring monitor job that periodically updates the mirroring status for every mirrored database on the server instance.

    .DESCRIPTION
        Creates a database mirroring monitor job that periodically updates the mirroring status for every mirrored database on the server instance.

        Basically executes sp_dbmmonitoraddmonitoring.

    .PARAMETER SqlInstance
        The target SQL Server instance

    .PARAMETER SqlCredential
        Login to the target instance using alternate Windows or SQL Login Authentication. Accepts credential objects (Get-Credential).

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Mirror, HA
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Add-DbaDbMirrorMonitor

    .EXAMPLE
        PS C:\> Add-DbaDbMirrorMonitor -SqlInstance sql2008, sql2012

        Creates a database mirroring monitor job that periodically updates the mirroring status for every mirrored database on sql2008 and sql2012.

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'Low')]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            if ($Pscmdlet.ShouldProcess($instance, "add mirror monitoring")) {
                try {
                    $server.Query("msdb.dbo.sp_dbmmonitoraddmonitoring")
                    [pscustomobject]@{
                        ComputerName  = $server.ComputerName
                        InstanceName  = $server.ServiceName
                        SqlInstance   = $server.DomainInstanceName
                        MonitorStatus = "Added"
                    }
                } catch {
                    Stop-Function -Message "Failure" -ErrorRecord $_ -Continue
                }
            }
        }
    }
}

tools\dbatools\functions\Clear-DbaConnectionPool.ps1

function Clear-DbaConnectionPool {
    <#
    .SYNOPSIS
        Resets (or empties) the connection pool.

    .DESCRIPTION
        This command resets (or empties) the connection pool.

        If there are connections in use at the time of the call, they are marked appropriately and will be discarded (instead of being returned to the pool) when Close() is called on them.

        Ref: https://msdn.microsoft.com/en-us/library/system.data.sqlclient.sqlconnection.clearallpools(v=vs.110).aspx

    .PARAMETER ComputerName
        Target computer(s). If no computer name is specified, the local computer is targeted.

    .PARAMETER Credential
        Alternate credential object to use for accessing the target computer(s).

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Connection
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Clear-DbaConnectionPool

    .EXAMPLE
        PS C:\> Clear-DbaConnectionPool

        Clears all local connection pools.

    .EXAMPLE
        PS C:\> Clear-DbaConnectionPool -ComputerName workstation27

        Clears all connection pools on workstation27.

    #>
    [CmdletBinding()]
    param (
        [Parameter(ValueFromPipeline)]
        [Alias("cn", "host", "Server")]
        [DbaInstanceParameter[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [switch][Alias('Silent')]
        $EnableException
    )

    process {
        # TODO: https://jamessdixon.wordpress.com/2013/01/22/ado-net-and-connection-pooling

        foreach ($computer in $ComputerName) {
            try {
                if (-not $computer.IsLocalhost) {
                    Write-Message -Level Verbose -Message "Clearing all pools on remote computer $computer"
                    if (Test-Bound 'Credential') {
                        Invoke-Command2 -ComputerName $computer -Credential $Credential -ScriptBlock { [System.Data.SqlClient.SqlConnection]::ClearAllPools() }
                    } else {
                        Invoke-Command2 -ComputerName $computer -ScriptBlock { [System.Data.SqlClient.SqlConnection]::ClearAllPools() }
                    }
                } else {
                    Write-Message -Level Verbose -Message "Clearing all local pools"
                    if (Test-Bound 'Credential') {
                        Invoke-Command2 -Credential $Credential -ScriptBlock { [System.Data.SqlClient.SqlConnection]::ClearAllPools() }
                    } else {
                        Invoke-Command2 -ScriptBlock { [System.Data.SqlClient.SqlConnection]::ClearAllPools() }
                    }
                }
            } catch {
                Stop-Function -Message "Failure" -ErrorRecord $_ -Target $computer -Continue
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Clear-DbaSqlConnectionPool
    }
}

tools\dbatools\functions\Clear-DbaLatchStatistics.ps1

function Clear-DbaLatchStatistics {
    <#
    .SYNOPSIS
        Clears Latch Statistics

    .DESCRIPTION
        Reset the aggregated statistics - basically just executes DBCC SQLPERF (N'sys.dm_os_latch_stats', CLEAR)

    .PARAMETER SqlInstance
        Allows you to specify a comma separated list of servers to query.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: LatchStatistic, Waits
        Author: Patrick Flynn (@sqllensman)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Clear-DbaLatchStatistics

    .EXAMPLE
        PS C:\> Clear-DbaLatchStatistics -SqlInstance sql2008, sqlserver2012

        After confirmation, clears latch statistics on servers sql2008 and sqlserver2012

    .EXAMPLE
        PS C:\> Clear-DbaLatchStatistics -SqlInstance sql2008, sqlserver2012 -Confirm:$false

        Clears latch statistics on servers sql2008 and sqlserver2012, without prompting

    .EXAMPLE
        PS C:\> 'sql2008','sqlserver2012' | Clear-DbaLatchStatistics

        After confirmation, clears latch statistics on servers sql2008 and sqlserver2012

    .EXAMPLE
        PS C:\> $cred = Get-Credential sqladmin
        PS C:\> Clear-DbaLatchStatistics -SqlInstance sql2008 -SqlCredential $cred

        Connects using sqladmin credential and clears latch statistics on servers sql2008 and sqlserver2012
    #>
    [CmdletBinding(ConfirmImpact = 'High', SupportsShouldProcess)]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseSingularNouns", "", Justification = "Singular Noun doesn't make sense")]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "SqlServers")]
        [DbaInstance[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias('Silent')]
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            Write-Message -Level Verbose -Message "Attempting to connect to $instance"

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            if ($Pscmdlet.ShouldProcess($instance, "Performing CLEAR of sys.dm_os_latch_stats")) {
                try {
                    $server.Query("DBCC SQLPERF (N'sys.dm_os_latch_stats' , CLEAR);")
                    $status = "Success"
                } catch {
                    $status = $_.Exception
                }

                [PSCustomObject]@{
                    ComputerName = $server.NetName
                    InstanceName = $server.ServiceName
                    SqlInstance  = $server.DomainInstanceName
                    Status       = $status
                }
            }
        }
    }
}

tools\dbatools\functions\Clear-DbaWaitStatistics.ps1

function Clear-DbaWaitStatistics {
    <#
    .SYNOPSIS
        Clears wait statistics

    .DESCRIPTION
        Reset the aggregated statistics - basically just executes DBCC SQLPERF (N'sys.dm_os_wait_stats', CLEAR)

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: WaitStatistic, Waits
        Author: Chrissy LeMaire (@cl)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Clear-DbaWaitStatistics

    .EXAMPLE
        PS C:\> Clear-DbaWaitStatistics -SqlInstance sql2008, sqlserver2012

        After confirmation, clears wait stats on servers sql2008 and sqlserver2012

    .EXAMPLE
        PS C:\> Clear-DbaWaitStatistics -SqlInstance sql2008, sqlserver2012 -Confirm:$false

        Clears wait stats on servers sql2008 and sqlserver2012, without prompting

    #>
    [CmdletBinding(ConfirmImpact = 'High', SupportsShouldProcess)]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseSingularNouns", "", Justification = "Singular Noun doesn't make sense")]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "SqlServers")]
        [DbaInstance[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias('Silent')]
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            if ($Pscmdlet.ShouldProcess($instance, "Performing CLEAR of sys.dm_os_wait_stats")) {
                try {
                    $server.Query("DBCC SQLPERF (N'sys.dm_os_wait_stats', CLEAR);")
                    $status = "Success"
                } catch {
                    $status = $_.Exception
                }

                [PSCustomObject]@{
                    ComputerName = $server.ComputerName
                    InstanceName = $server.ServiceName
                    SqlInstance  = $server.DomainInstanceName
                    Status       = $status
                }
            }
        }
    }
}

tools\dbatools\functions\configuration\Export-DbatoolsConfig.ps1

function Export-DbatoolsConfig
{
<#
    .SYNOPSIS
        Exports configuration items to a Json file.
    
    .DESCRIPTION
        Exports configuration items to a Json file.
    
    .PARAMETER FullName
        Select the configuration objects to export by filtering by their full name.
    
    .PARAMETER Module
        Select the configuration objects to export by filtering by their module name.
    
    .PARAMETER Name
        Select the configuration objects to export by filtering by their name.
    
    .PARAMETER Config
        The configuration object(s) to export.
        Returned by Get-DbatoolsConfig.
    
    .PARAMETER ModuleName
        Exports all configuration pertinent to a module to a predefined path.
        Exported configuration items include all settings marked as 'ModuleExport' that have been changed from the default value.
    
    .PARAMETER ModuleVersion
        The configuration version of the module-settings to write.
    
    .PARAMETER Scope
        Which predefined path to write module specific settings to.
        Only file scopes are considered.
        By default it writes to the suer profile.
    
    .PARAMETER OutPath
        The path (filename included) to export to.
        Will fail if the folder does not exist, will overwrite the file if it exists.
    
    .PARAMETER SkipUnchanged
        If set, configuration objects whose value was not changed from its original value will not be exported.
        (Note: Settings that were updated with the same value as the original default will still be considered changed)
    
    .PARAMETER EnableException
        This parameters disables user-friendly warnings and enables the throwing of exceptions.
        This is less user friendly, but allows catching exceptions in calling scripts.
    
    .EXAMPLE
        PS C:\> Get-DbatoolsConfig | Export-DbatoolsConfig -OutPath '~/export.json'
        
        Exports all current settings to json.
    
    .EXAMPLE
        Export-DbatoolsConfig -Module message -OutPath '~/export.json' -SkipUnchanged
        
        Exports all settings of the module 'message' that are no longer the original default values to json.
#>
    [CmdletBinding(DefaultParameterSetName = 'FullName')]
    Param (
        [Parameter(ParameterSetName = "FullName", Position = 0, Mandatory = $true)]
        [string]
        $FullName,
        
        [Parameter(ParameterSetName = "Module", Position = 0, Mandatory = $true)]
        [string]
        $Module,
        
        [Parameter(ParameterSetName = "Module", Position = 1)]
        [string]
        $Name = "*",
        
        [Parameter(ParameterSetName = "Config", Position = 0, Mandatory = $true, ValueFromPipeline = $true)]
        [Sqlcollaborative.Dbatools.Configuration.Config[]]
        $Config,
        
        [Parameter(ParameterSetName = "ModuleName", Mandatory = $true)]
        [string]
        $ModuleName,
        
        [Parameter(ParameterSetName = "ModuleName")]
        [int]
        $ModuleVersion = 1,
        
        [Parameter(ParameterSetName = "ModuleName")]
        [Sqlcollaborative.Dbatools.Configuration.ConfigScope]
        $Scope = "FileUserShared",
        
        [Parameter(Position = 1, Mandatory = $true, ParameterSetName = 'Config')]
        [Parameter(Position = 1, Mandatory = $true, ParameterSetName = 'FullName')]
        [Parameter(Position = 2, Mandatory = $true, ParameterSetName = 'Module')]
        [string]
        $OutPath,
        
        [switch]
        $SkipUnchanged,
        
        [switch]
        $EnableException
    )
    
    begin
    {
        Write-Message -Level InternalComment -Message "Bound parameters: $($PSBoundParameters.Keys -join ", ")" -Tag 'debug', 'start', 'param'
        
        $items = @()
        
        if (($Scope -band 15) -and ($ModuleName))
        {
            Stop-Function -Message "Cannot export modulecache to registry! Please pick a file scope for your export destination" -EnableException $EnableException -Category InvalidArgument -Tag 'fail', 'scope', 'registry'
            return
        }
    }
    process
    {
        if (Test-FunctionInterrupt) { return }
        
        if (-not $ModuleName)
        {
            foreach ($item in $Config) { $items += $item }
            if ($FullName) { $items = Get-DbatoolsConfig -FullName $FullName }
            if ($Module) { $items = Get-DbatoolsConfig -Module $Module -Name $Name }
        }
    }
    end
    {
        if (Test-FunctionInterrupt) { return }
        
        if (-not $ModuleName)
        {
            try { Write-DbatoolsConfigFile -Config ($items | Where-Object { -not $SkipUnchanged -or -not $_.Unchanged } ) -Path $OutPath -Replace }
            catch
            {
                Stop-Function -Message "Failed to export to file" -EnableException $EnableException -ErrorRecord $_ -Tag 'fail', 'export'
                return
            }
        }
        else
        {
            if ($Scope -band 16)
            {
                Write-DbatoolsConfigFile -Config (Get-DbatoolsConfig -Module $ModuleName -Force | Where-Object ModuleExport | Where-Object Unchanged -NE $true) -Path (Join-Path $script:path_FileUserLocal "$($ModuleName.ToLower())-$($ModuleVersion).json")
            }
            if ($Scope -band 32)
            {
                Write-DbatoolsConfigFile -Config (Get-DbatoolsConfig -Module $ModuleName -Force | Where-Object ModuleExport | Where-Object Unchanged -NE $true)  -Path (Join-Path $script:path_FileUserShared "$($ModuleName.ToLower())-$($ModuleVersion).json")
            }
            if ($Scope -band 64)
            {
                Write-DbatoolsConfigFile -Config (Get-DbatoolsConfig -Module $ModuleName -Force | Where-Object ModuleExport | Where-Object Unchanged -NE $true)  -Path (Join-Path $script:path_FileSystem "$($ModuleName.ToLower())-$($ModuleVersion).json")
            }
        }
    }
}

tools\dbatools\bin\XEtemplates\Query Batch Tracking.xml

<event_sessions xmlns="http://schemas.microsoft.com/sqlserver/2008/07/extendedeventconfig">
  <event_session name="Query Batch Tracking" maxMemory="4" eventRetentionMode="allowSingleEventLoss" trackCausality="true" dispatchLatency="30" maxEventSize="0" memoryPartitionMode="none">
    <templateCategory>
      <!-- _locID_text="templateCategory" _locComment = "" -->Query Execution</templateCategory>
    <templateName>
      <!-- _locID_text = "templateName" _locComment = "" -->Query Batch Tracking</templateName>
    <templateDescription>
      <!-- _locID_text = "templateDescription" _locComment = "" -->Collects batch and RPC level statements as well as error information. You can use this template to understand the flow of queries that are executing on your system and track errors back to the queries that caused them. All batch events are collected in this session so collection size may be very large. To reduce the collection size, consider using the Query Batch Sampling template, which already includes a filter.</templateDescription>    
    <event package="sqlserver" name="error_reported">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="query_hash" />
      <action package="sqlserver" name="session_id" />
      <predicate>
        <and>
          <leaf>
            <comparator name="greater_than_uint64" package="package0"></comparator>
            <global name="database_id" package="sqlserver"></global>
            <value>4</value>
          </leaf>
          <leaf>
            <comparator name="equal_boolean" package="package0"></comparator>
            <global name="is_system" package="sqlserver"></global>
            <value>false</value>
          </leaf>
        </and>
      </predicate>
    </event>
    <event package="sqlserver" name="rpc_completed">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="query_hash" />
      <action package="sqlserver" name="session_id" />
      <predicate>
        <and>
          <leaf>
            <comparator name="greater_than_uint64" package="package0"></comparator>
            <global name="database_id" package="sqlserver"></global>
            <value>4</value>
          </leaf>
          <leaf>
            <comparator name="equal_boolean" package="package0"></comparator>
            <global name="is_system" package="sqlserver"></global>
            <value>false</value>
          </leaf>
        </and>
      </predicate>
    </event>
    <event package="sqlserver" name="sql_batch_completed">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="query_hash" />
      <action package="sqlserver" name="session_id" />
      <predicate>
        <and>
          <leaf>
            <comparator name="greater_than_uint64" package="package0"></comparator>
            <global name="database_id" package="sqlserver"></global>
            <value>4</value>
          </leaf>
          <leaf>
            <comparator name="equal_boolean" package="package0"></comparator>
            <global name="is_system" package="sqlserver"></global>
            <value>false</value>
          </leaf>
        </and>
      </predicate>
    </event>
    <target package="package0" name="ring_buffer" />
  </event_session>
</event_sessions>

tools\dbatools\bin\XEtemplates\Query Detail Sampling.xml

<event_sessions xmlns="http://schemas.microsoft.com/sqlserver/2008/07/extendedeventconfig">
  <event_session name="Query Detail Sampling" maxMemory="4" eventRetentionMode="allowSingleEventLoss" trackCausality="true" dispatchLatency="30" maxEventSize="0" memoryPartitionMode="none">
    <templateCategory>
      <!-- _locID_text="templateCategory" _locComment = "" -->Query Execution</templateCategory>
    <templateName>
      <!-- _locID_text = "templateName" _locComment = "" -->Query Detail Sampling</templateName>
    <templateDescription>
      <!-- _locID_text = "templateDescription" _locComment = "" -->Collects detailed statement and error information. You can use this template to track each statement that has executed on your system as a result of query batches or stored procedures and track errors back to the specific statement that caused them. This template also collects the query hash and query plan hash for every statement it tracks. Events are only collected from 20% of the active sessions on the server at any given time. You can change the sampling rate by modifying the filter for the event session.</templateDescription>
    <event package="sqlserver" name="error_reported">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="query_hash" />
      <action package="sqlserver" name="session_id" />
      <predicate>
        <and>
          <and>
            <leaf>
              <comparator name="divides_by_uint64" package="package0"></comparator>
              <global name="session_id" package="sqlserver"></global>
              <value>5</value>
            </leaf>
            <leaf>
              <comparator name="greater_than_uint64" package="package0"></comparator>
              <global name="database_id" package="sqlserver"></global>
              <value>4</value>
            </leaf>
          </and>
          <leaf>
            <comparator name="equal_boolean" package="package0"></comparator>
            <global name="is_system" package="sqlserver"></global>
            <value>false</value>
          </leaf>
        </and>
      </predicate>
    </event>
    <event package="sqlserver" name="module_end">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="query_hash" />
      <action package="sqlserver" name="session_id" />
      <parameter name="collect_statement" value="1" />
      <predicate>
        <and>
          <and>
            <leaf>
              <comparator name="divides_by_uint64" package="package0"></comparator>
              <global name="session_id" package="sqlserver"></global>
              <value>5</value>
            </leaf>
            <leaf>
              <comparator name="greater_than_uint64" package="package0"></comparator>
              <global name="database_id" package="sqlserver"></global>
              <value>4</value>
            </leaf>
          </and>
          <leaf>
            <comparator name="equal_boolean" package="package0"></comparator>
            <global name="is_system" package="sqlserver"></global>
            <value>false</value>
          </leaf>
        </and>
      </predicate>
    </event>
    <event package="sqlserver" name="rpc_completed">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="query_hash" />
      <action package="sqlserver" name="session_id" />
      <predicate>
        <and>
          <and>
            <leaf>
              <comparator name="divides_by_uint64" package="package0"></comparator>
              <global name="session_id" package="sqlserver"></global>
              <value>5</value>
            </leaf>
            <leaf>
              <comparator name="greater_than_uint64" package="package0"></comparator>
              <global name="database_id" package="sqlserver"></global>
              <value>4</value>
            </leaf>
          </and>
          <leaf>
            <comparator name="equal_boolean" package="package0"></comparator>
            <global name="is_system" package="sqlserver"></global>
            <value>false</value>
          </leaf>
        </and>
      </predicate>
    </event>
    <event package="sqlserver" name="sp_statement_completed">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="query_hash" />
      <action package="sqlserver" name="query_plan_hash" />
      <action package="sqlserver" name="session_id" />
      <parameter name="collect_object_name" value="1" />
      <predicate>
        <and>
          <and>
            <leaf>
              <comparator name="divides_by_uint64" package="package0"></comparator>
              <global name="session_id" package="sqlserver"></global>
              <value>5</value>
            </leaf>
            <leaf>
              <comparator name="greater_than_uint64" package="package0"></comparator>
              <global name="database_id" package="sqlserver"></global>
              <value>4</value>
            </leaf>
          </and>
          <leaf>
            <comparator name="equal_boolean" package="package0"></comparator>
            <global name="is_system" package="sqlserver"></global>
            <value>false</value>
          </leaf>
        </and>
      </predicate>
    </event>
    <event package="sqlserver" name="sql_batch_completed">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="query_hash" />
      <action package="sqlserver" name="session_id" />
      <predicate>
        <and>
          <and>
            <leaf>
              <comparator name="divides_by_uint64" package="package0"></comparator>
              <global name="session_id" package="sqlserver"></global>
              <value>5</value>
            </leaf>
            <leaf>
              <comparator name="greater_than_uint64" package="package0"></comparator>
              <global name="database_id" package="sqlserver"></global>
              <value>4</value>
            </leaf>
          </and>
          <leaf>
            <comparator name="equal_boolean" package="package0"></comparator>
            <global name="is_system" package="sqlserver"></global>
            <value>false</value>
          </leaf>
        </and>
      </predicate>
    </event>
    <event package="sqlserver" name="sql_statement_completed">
      <action package="sqlserver" name="client_app_name" />
      <action package="sqlserver" name="database_id" />
      <action package="sqlserver" name="query_hash" />
      <action package="sqlserver" name="query_plan_hash" />
      <action package="sqlserver" name="session_id" />
      <predicate>
        <and>
          <and>
            <leaf>
              <comparator name="divides_by_uint64" package="package0"></comparator>
              <global name="session_id" package="sqlserver"></global>
              <value>5</value>
            </leaf>
            <leaf>
              <comparator name="greater_than_uint64" package="package0"></comparator>
              <global name="database_id" package="sqlserver"></global>
              <value>4</value>
            </leaf>
          </and>
          <leaf>
            <comparator name="equal_boolean" package="package0"></comparator>
            <global name="is_system" package="sqlserver"></global>
            <value>false</value>
          </leaf>
        </and>
      </predicate>
    </event>
    <target package="package0" name="ring_buffer" />
  </event_session>
</event_sessions>

tools\dbatools\functions\configuration\Get-DbatoolsConfig.ps1

function Get-DbatoolsConfig {
    <#
    .SYNOPSIS
        Retrieves configuration elements by name.

    .DESCRIPTION
        Retrieves configuration elements by name.
        Can be used to search the existing configuration list.

    .PARAMETER FullName
        Default: "*"
        Search for configurations using the full name

    .PARAMETER Name
        Default: "*"
        The name of the configuration element(s) to retrieve.
        May be any string, supports wildcards.

    .PARAMETER Module
        Default: "*"
        Search configuration by module.

    .PARAMETER Force
        Overrides the default behavior and also displays hidden configuration values.

    .NOTES
        Tags: Config, Module
        Author: Friedrich Weinmann (@FredWeinmann)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Get-DbatoolsConfig 'Mail.To'

        Retrieves the configuration element for the key "Mail.To"

    .EXAMPLE
        PS C:\> Get-DbatoolsConfig -Force

        Retrieve all configuration elements from all modules, even hidden ones.

    #>
    [CmdletBinding(DefaultParameterSetName = "FullName")]
    param (
        [Parameter(ParameterSetName = "FullName", Position = 0)]
        [string]$FullName = "*",
        [Parameter(ParameterSetName = "Module", Position = 1)]
        [string]$Name = "*",
        [Parameter(ParameterSetName = "Module", Position = 0)]
        [string]$Module = "*",
        [switch]$Force
    )

    switch ($PSCmdlet.ParameterSetName) {
        "Module" {
            $Name = $Name.ToLower()
            $Module = $Module.ToLower()

            [Sqlcollaborative.Dbatools.Configuration.ConfigurationHost]::Configurations.Values | Where-Object { ($_.Name -like $Name) -and ($_.Module -like $Module) -and ((-not $_.Hidden) -or ($Force)) } | Sort-Object Module, Name
        }

        "FullName" {
            [Sqlcollaborative.Dbatools.Configuration.ConfigurationHost]::Configurations.Values | Where-Object { ("$($_.Module).$($_.Name)" -like $FullName) -and ((-not $_.Hidden) -or ($Force)) } | Sort-Object Module, Name
        }
    }
    Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Get-DbaConfig
}

tools\dbatools\functions\configuration\Get-DbatoolsConfigValue.ps1

function Get-DbatoolsConfigValue {
    <#
    .SYNOPSIS
        Returns the configuration value stored under the specified name.

    .DESCRIPTION
        Returns the configuration value stored under the specified name.
        It requires the full name (<Module>.<Name>) and is usually only called by functions.

    .PARAMETER FullName
        The full name (<Module>.<Name>) of the configured value to return.

    .PARAMETER Fallback
        A fallback value to use, if no value was registered to a specific configuration element.
        This basically is a default value that only applies on a "per call" basis, rather than a system-wide default.

    .PARAMETER NotNull
        By default, this function returns null if one tries to retrieve the value from either a Configuration that does not exist or a Configuration whose value was set to null.
        However, sometimes it may be important that some value was returned.
        By specifying this parameter, the function will throw an error if no value was found at all.

    .NOTES
        Tags: Config, Module
        Author: Friedrich Weinmann (@FredWeinmann)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Get-DbatoolsConfigValue -Name 'System.MailServer'

        Returns the configured value that was assigned to the key 'System.MailServer'

    .EXAMPLE
        PS C:\> Get-DbatoolsConfigValue -Name 'Default.CoffeeMilk' -Fallback 0

        Returns the configured value for 'Default.CoffeeMilk'. If no such value is configured, it returns '0' instead.

    #>
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSPossibleIncorrectComparisonWithNull", "")]
    [CmdletBinding()]
    param (
        [Alias('Name')]
        [Parameter(Mandatory)]
        [string]$FullName,
        [object]$Fallback,
        [switch]$NotNull
    )
    Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Get-DbaConfigValue
    $FullName = $FullName.ToLower()

    $temp = $null
    $temp = [Sqlcollaborative.Dbatools.Configuration.ConfigurationHost]::Configurations[$FullName].Value
    if ($temp -eq $null) { $temp = $Fallback }

    if ($NotNull -and ($temp -eq $null)) {
        Stop-Function -Message "No Configuration Value available for $Name" -EnableException $true -Category InvalidData -Target $FullName
    } else {
        return $temp
    }
}

tools\dbatools\functions\configuration\Import-DbatoolsConfig.ps1

function Import-DbatoolsConfig
{
<#
    .SYNOPSIS
        Imports a json configuration file into the configuration system.
    
    .DESCRIPTION
        Imports a json configuration file into the configuration system.
    
    .PARAMETER Path
        The path to the json file to import.
    
    .PARAMETER ModuleName
        Import configuration items specific to a module from the default configuration paths.
    
    .PARAMETER ModuleVersion
        The configuration version of the module-settings to load.
    
    .PARAMETER Scope
        Where to import the module specific configuration items form.
        Only file-based scopes are supported for this.
        By default, all locations are queried, with user settings beating system settings.
    
    .PARAMETER IncludeFilter
        If specified, only elements with names that are similar (-like) to names in this list will be imported.
    
    .PARAMETER ExcludeFilter
        Elements that are similar (-like) to names in this list will not be imported.
    
    .PARAMETER Peek
        Rather than applying the setting, return the configuration items that would have been applied.
    
    .PARAMETER EnableException
        This parameters disables user-friendly warnings and enables the throwing of exceptions.
        This is less user friendly, but allows catching exceptions in calling scripts.
    
    .EXAMPLE
        PS C:\> Import-DbatoolsConfig -Path '.\config.json'
        
        Imports the configuration stored in '.\config.json'
    
    .EXAMPLE
        PS C:\> Import-DbatoolsConfig -ModuleName message
    
        Imports all the module specific settings that have been persisted in any of the default file system paths.
#>
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSAvoidUsingEmptyCatchBlock", "")]
    [CmdletBinding(DefaultParameterSetName = "Path")]
    param (
        [Parameter(Mandatory = $true, ValueFromPipeline = $true, ParameterSetName = "Path")]
        [string[]]
        $Path,
        
        [Parameter(ParameterSetName = "ModuleName", Mandatory = $true)]
        [string]
        $ModuleName,
        
        [Parameter(ParameterSetName = "ModuleName")]
        [int]
        $ModuleVersion = 1,
        
        [Parameter(ParameterSetName = "ModuleName")]
        [Sqlcollaborative.Dbatools.Configuration.ConfigScope]
        $Scope = "FileUserLocal, FileUserShared, FileSystem",
        
        [Parameter(ParameterSetName = "Path")]
        [string[]]
        $IncludeFilter,
        
        [Parameter(ParameterSetName = "Path")]
        [string[]]
        $ExcludeFilter,
        
        [Parameter(ParameterSetName = "Path")]
        [switch]
        $Peek,
        
        [switch]
        $EnableException
    )
    
    begin
    {
        Write-Message -Level InternalComment -Message "Bound parameters: $($PSBoundParameters.Keys -join ", ")" -Tag 'debug','start','param'
    }
    process
    {
        #region Explicit Path
        foreach ($item in $Path)
        {
            try
            {
                if ($item -like "http*") { $data = Read-DbatoolsConfigFile -Weblink $item -ErrorAction Stop }
                else
                {
                    $pathItem = $null
                    try { $pathItem = Resolve-DbaPath -Path $item -SingleItem -Provider FileSystem }
                    catch { }
                    if ($pathItem) { $data = Read-DbatoolsConfigFile -Path $pathItem -ErrorAction Stop }
                    else { $data = Read-DbatoolsConfigFile -RawJson $item -ErrorAction Stop }
                }
            }
            catch { Stop-Function -Message "Failed to import $item" -EnableException $EnableException -Tag 'fail', 'import' -ErrorRecord $_ -Continue -Target $item }
            
            :element foreach ($element in $data)
            {
                #region Exclude Filter
                foreach ($exclusion in $ExcludeFilter)
                {
                    if ($element.FullName -like $exclusion)
                    {
                        continue element
                    }
                }
                #endregion Exclude Filter
                
                #region Include Filter
                if ($IncludeFilter)
                {
                    $isIncluded = $false
                    foreach ($inclusion in $IncludeFilter)
                    {
                        if ($element.FullName -like $inclusion)
                        {
                            $isIncluded = $true
                            break
                        }
                    }
                    
                    if (-not $isIncluded) { continue }
                }
                #endregion Include Filter
                
                if ($Peek) { $element }
                else
                {
                    try
                    {
                        if (-not $element.KeepPersisted) { Set-DbatoolsConfig -FullName $element.FullName -Value $element.Value -EnableException }
                        else { Set-DbatoolsConfig -FullName $element.FullName -PersistedValue $element.Value -PersistedType $element.Type }
                    }
                    catch
                    {
                        Stop-Function -Message "Failed to set '$($element.FullName)'" -ErrorRecord $_ -EnableException $EnableException -Tag 'fail', 'import' -Continue -Target $item
                    }
                }
            }
        }
        #endregion Explicit Path
        
        if ($ModuleName)
        {
            $data = Read-DbatoolsConfigPersisted -Module $ModuleName -Scope $Scope -ModuleVersion $ModuleVersion
            
            foreach ($value in $data.Values)
            {
                if (-not $value.KeepPersisted) { Set-DbatoolsConfig -FullName $value.FullName -Value $value.Value -EnableException:$EnableException}
                else { Set-DbatoolsConfig -FullName $value.FullName -Value ([Sqlcollaborative.Dbatools.Configuration.ConfigurationHost]::ConvertFromPersistedValue($value.Value, $value.Type)) -EnableException:$EnableException }
            }
        }
    }
    end
    {
    
    }
}

tools\dbatools\functions\Copy-DbaSpConfigure.ps1

function Copy-DbaSpConfigure {
    <#
    .SYNOPSIS
        Copy-DbaSpConfigure migrates configuration values from one SQL Server to another.

    .DESCRIPTION
        By default, all configuration values are copied. The -ConfigName parameter is auto-populated for command-line completion and can be used to copy only specific configs.

    .PARAMETER Source
        Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.

    .PARAMETER SourceSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Destination
        Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.

    .PARAMETER DestinationSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER ConfigName
        Specifies the configuration setting to process. Options for this list are auto-populated from the server. If unspecified, all ConfigNames will be processed.

    .PARAMETER ExcludeConfigName
        Specifies the configuration settings to exclude. Options for this list are auto-populated from the server.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Migration, Configure, SpConfigure
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        Requires: sysadmin access on SQL Servers

    .LINK
        https://dbatools.io/Copy-DbaSpConfigure

    .EXAMPLE
        PS C:\> Copy-DbaSpConfigure -Source sqlserver2014a -Destination sqlcluster

        Copies all sp_configure settings from sqlserver2014a to sqlcluster

    .EXAMPLE
        PS C:\> Copy-DbaSpConfigure -Source sqlserver2014a -Destination sqlcluster -ConfigName DefaultBackupCompression, IsSqlClrEnabled -SourceSqlCredential $cred

        Copies the values for IsSqlClrEnabled and DefaultBackupCompression from sqlserver2014a to sqlcluster using SQL credentials to authenticate to sqlserver2014a and Windows credentials to authenticate to sqlcluster.

    .EXAMPLE
        PS C:\> Copy-DbaSpConfigure -Source sqlserver2014a -Destination sqlcluster -ExcludeConfigName DefaultBackupCompression, IsSqlClrEnabled

        Copies all configs except for IsSqlClrEnabled and DefaultBackupCompression, from sqlserver2014a to sqlcluster.

    .EXAMPLE
        PS C:\> Copy-DbaSpConfigure -Source sqlserver2014a -Destination sqlcluster -WhatIf

        Shows what would happen if the command were executed.

    #>
    [CmdletBinding(DefaultParameterSetName = "Default", SupportsShouldProcess)]
    param (
        [parameter(Mandatory)]
        [DbaInstanceParameter]$Source,
        [PSCredential]$SourceSqlCredential,
        [parameter(Mandatory)]
        [DbaInstanceParameter[]]$Destination,
        [PSCredential]$DestinationSqlCredential,
        [object[]]$ConfigName,
        [object[]]$ExcludeConfigName,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {
        try {
            $sourceServer = Connect-SqlInstance -SqlInstance $Source -SqlCredential $SourceSqlCredential
            $sourceProps = Get-DbaSpConfigure -SqlInstance $sourceServer
        } catch {
            Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $Source
            return
        }
    }
    process {
        if (Test-FunctionInterrupt) { return }
        foreach ($destinstance in $Destination) {
            try {
                $destServer = Connect-SqlInstance -SqlInstance $destinstance -SqlCredential $DestinationSqlCredential
                $destProps = Get-DbaSpConfigure -SqlInstance $destServer
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $destinstance -Continue
            }

            foreach ($sourceProp in $sourceProps) {
                $displayName = $sourceProp.DisplayName
                $sConfigName = $sourceProp.ConfigName
                $sConfiguredValue = $sourceProp.ConfiguredValue
                $requiresRestart = $sourceProp.IsDynamic

                $copySpConfigStatus = [pscustomobject]@{
                    SourceServer      = $sourceServer.Name
                    DestinationServer = $destServer.Name
                    Name              = $sConfigName
                    Type              = "Configuration Value"
                    Status            = $null
                    Notes             = $null
                    DateTime          = [DbaDateTime](Get-Date)
                }

                if ($ConfigName -and $sConfigName -notin $ConfigName -or $sConfigName -in $ExcludeConfigName) {
                    continue
                }

                $destProp = $destProps | Where-Object ConfigName -eq $sConfigName
                if (!$destProp) {
                    Write-Message -Level Verbose -Message "Configuration $sConfigName ('$displayName') does not exist on the destination instance."

                    $copySpConfigStatus.Status = "Skipped"
                    $copySpConfigStatus.Notes = "Configuration does not exist on destination"
                    $copySpConfigStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                    continue
                }

                if ($Pscmdlet.ShouldProcess($destinstance, "Updating $sConfigName [$displayName]")) {
                    try {
                        $destOldConfigValue = $destProp.ConfiguredValue

                        if ($sConfiguredValue -ne $destOldConfigValue) {
                            $result = Set-DbaSpConfigure -SqlInstance $destServer -Name $sConfigName -Value $sConfiguredValue -EnableException -WarningAction SilentlyContinue
                            if ($result) {
                                Write-Message -Level Verbose -Message "Updated $($destProp.ConfigName) ($($destProp.DisplayName)) from $destOldConfigValue to $sConfiguredValue."
                            }
                        }
                        if ($requiresRestart -eq $false) {
                            Write-Message -Level Verbose -Message "Configuration option $sConfigName ($displayName) requires restart."
                            $copySpConfigStatus.Notes = "Requires restart"
                        }
                        $copySpConfigStatus.Status = "Successful"
                        $copySpConfigStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                    } catch {
                        if ($_.Exception -match 'the same as the') {
                            $copySpConfigStatus.Status = "Successful"
                        } else {
                            $copySpConfigStatus.Status = "Failed"
                            $copySpConfigStatus.Notes = (Get-ErrorMessage -Record $_)
                        }
                        $copySpConfigStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                        Stop-Function -Message "Could not set $($destProp.ConfigName) to $sConfiguredValue." -Target $sConfigName -ErrorRecord $_
                    }
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Copy-SqlSpConfigure
    }
}

tools\dbatools\functions\Copy-DbaSsisCatalog.ps1

#ValidationTags#Messaging#
function Copy-DbaSsisCatalog {
    <#
    .SYNOPSIS
        Copy-DbaSsisCatalog migrates Folders, SSIS projects, and environments from one SQL Server to another.

    .DESCRIPTION
        By default, all folders, projects, and environments are copied. The -Project parameter can be specified to copy only one project, if desired.

        The parameters get more granular from the Folder level. For example, specifying -Folder will only deploy projects/environments from within that folder.

    .PARAMETER Source
        Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2012 or higher.

    .PARAMETER SourceSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Destination
        Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2012 or higher.

    .PARAMETER DestinationSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Force
        If this switch is enabled, the SSIS Catalog will be dropped and recreated on Destination if it already exists.

    .PARAMETER Project
        Specifies a source Project name.

    .PARAMETER Folder
        Specifies a source folder name.

    .PARAMETER Environment
        Specifies an environment to copy.

    .PARAMETER EnableSqlClr
        If this switch is enabled and Destination does not have the SQL CLR configuration option enabled, user prompts for enabling it on Destination will be skipped. SQL CLR is required for SSISDB.

    .PARAMETER CreateCatalogPassword
        Specifies a secure string to use in creating an SSISDB catalog on Destination. If this is specified, prompts for the password will be skipped.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Migration, SSIS
        Author: Phil Schwartz (philschwartz.me, @pschwartzzz)

        dbatools PowerShell module (https://dbatools.io, [email protected])
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Copy-DbaSsisCatalog

    .EXAMPLE
        PS C:\> Copy-DbaSsisCatalog -Source sqlserver2014a -Destination sqlcluster

        Copies all folders, environments and SSIS Projects from sqlserver2014a to sqlcluster, using Windows credentials to authenticate to both instances. If folders with the same name exist on the destination they will be skipped, but projects will be redeployed.

    .EXAMPLE
        PS C:\> Copy-DbaSsisCatalog -Source sqlserver2014a -Destination sqlcluster -Project Archive_Tables -SourceSqlCredential $cred -Force

        Copies a single Project, the Archive_Tables Project, from sqlserver2014a to sqlcluster using SQL credentials to authenticate to sqlserver2014a and Windows credentials to authenticate to sqlcluster. If a Project with the same name exists on sqlcluster, it will be deleted and recreated because -Force was used.

    .EXAMPLE
        PS C:\> Copy-DbaSsisCatalog -Source sqlserver2014a -Destination sqlcluster -WhatIf -Force

        Shows what would happen if the command were executed using force.

    .EXAMPLE
        PS C:\> $SecurePW = Read-Host "Enter password" -AsSecureString
        PS C:\> Copy-DbaSsisCatalog -Source sqlserver2014a -Destination sqlcluster -CreateCatalogPassword $SecurePW

        Deploy entire SSIS catalog to an instance without a destination catalog. User prompts for creating the catalog on Destination will be bypassed.

       #>
    [CmdletBinding(DefaultParameterSetName = "Default", SupportsShouldProcess)]
    param (
        [parameter(Mandatory)]
        [DbaInstanceParameter]$Source,
        [parameter(Mandatory)]
        [DbaInstanceParameter[]]$Destination,
        [PSCredential]$SourceSqlCredential,
        [PSCredential]$DestinationSqlCredential,
        [String]$Project,
        [String]$Folder,
        [String]$Environment,
        [System.Security.SecureString]$CreateCatalogPassword,
        [Switch]$EnableSqlClr,
        [Switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )
    <# Developer note: The throw calls must stay in this command #>
    begin {
        function Get-RemoteIntegrationService {
            param (
                [Object]$Computer
            )
            $result = Get-DbaService -ComputerName $Computer -Type SSIS
            if ($result) {
                #Variable marked as unused by PSScriptAnalyzer
                #$running = $false
                foreach ($service in $result) {
                    if (!$service.State -eq "Running") {
                        Write-Message -Level Warning -Message "Service $($service.DisplayName) was found on the destination, but is currently not running."
                    } else {
                        Write-Message -Level Verbose -Message "Service $($service.DisplayName) was found running on the destination."
                        #$running = $true
                    }
                }
            } else {
                throw "No Integration Services service was found on the destination, please ensure the feature is installed and running."
            }
        }
        function Invoke-ProjectDeployment {
            param (
                [String]$Project,
                [String]$Folder
            )
            $sqlConn = New-Object System.Data.SqlClient.SqlConnection
            $sqlConn.ConnectionString = $sourceServer.ConnectionContext.ConnectionString
            if ($sqlConn.State -eq "Closed") {
                $sqlConn.Open()
            }
            try {
                Write-Message -Level Verbose -Message "Deploying project $Project from folder $Folder."
                $cmd = New-Object System.Data.SqlClient.SqlCommand
                $cmd.CommandType = "StoredProcedure"
                $cmd.connection = $sqlConn
                $cmd.CommandText = "SSISDB.Catalog.get_project"
                $cmd.Parameters.Add("@folder_name", $Folder) | out-null;
                $cmd.Parameters.Add("@project_name", $Project) | out-null;
                [byte[]]$results = $cmd.ExecuteScalar();
                if ($null -ne $results) {
                    $destFolder = $destinationFolders | Where-Object {
                        $_.Name -eq $Folder
                    }
                    $deployedProject = $destFolder.DeployProject($Project, $results)
                    if ($deployedProject.Status -ne "Success") {
                        Stop-Function -Message "An error occurred deploying project $Project." -Target $Project -Continue
                    }
                } else {
                    Stop-Function -Message "Failed deploying $Project from folder $Folder." -Target $Project -Continue
                }
            } catch {
                Stop-Function -Message "Failed to deploy project." -Target $Project -ErrorRecord $_
            } finally {
                if ($sqlConn.State -eq "Open") {
                    $sqlConn.Close()
                }
            }
        }
        function New-CatalogFolder {
            [CmdletBinding(SupportsShouldProcess)]
            param (
                [String]$Folder,
                [String]$Description,
                [Switch]$Force
            )
            if ($Pscmdlet.ShouldProcess($folder, "Creating new Catalog Folder")) {
                if ($Force) {
                    $remove = $destinationFolders | Where-Object {
                        $_.Name -eq $Folder
                    }
                    $envs = $remove.Environments.Name
                    foreach ($e in $envs) {
                        $remove.Environments[$e].Drop()
                    }
                    $projs = $remove.Projects.Name
                    foreach ($p in $projs) {
                        $remove.Projects[$p].Drop()
                    }
                    $remove.Drop()
                    $destinationCatalog.Alter()
                    $destinationCatalog.Refresh()
                }
                Write-Message -Level Verbose -Message "Creating folder $Folder."
                $destFolder = New-Object "$ISNamespace.CatalogFolder" ($destinationCatalog, $Folder, $Description)
                $destFolder.Create()
                $destFolder.Alter()
                $destFolder.Refresh()
            }
        }
        function New-FolderEnvironment {
            [CmdletBinding(SupportsShouldProcess)]
            param (
                [String]$Folder,
                [String]$Environment,
                [Switch]$Force
            )
            if ($Pscmdlet.ShouldProcess($folder, "Creating new Environment Folder")) {
                $envDestFolder = $destinationFolders | Where-Object {
                    $_.Name -eq $Folder
                }
                if ($force) {
                    $envDestFolder.Environments[$Environment].Drop()
                    $envDestFolder.Alter()
                    $envDestFolder.Refresh()
                }
                $srcEnv = ($sourceFolders | Where-Object {
                        $_.Name -eq $Folder
                    }).Environments[$Environment]
                $targetEnv = New-Object "$ISNamespace.EnvironmentInfo" ($envDestFolder, $srcEnv.Name, $srcEnv.Description)
                foreach ($var in $srcEnv.Variables) {
                    if ($var.Value.ToString() -eq "") {
                        $finalValue = ""
                    } else {
                        $finalValue = $var.Value
                    }
                    $targetEnv.Variables.Add($var.Name, $var.Type, $finalValue, $var.Sensitive, $var.Description)
                }
                Write-Message -Level Verbose -Message "Creating environment $Environment."
                $targetEnv.Create()
                $targetEnv.Alter()
                $targetEnv.Refresh()
            }
        }
        function New-SSISDBCatalog {
            [CmdletBinding(SupportsShouldProcess)]
            param (
                [System.Security.SecureString]$SecurePassword
            )
            if ($Pscmdlet.ShouldProcess("Creating New SSISDB Catalog")) {
                if (!$Password) {
                    Write-Message -Level Verbose -Message "SSISDB Catalog requires a password."
                    $pass1 = Read-Host "Enter a password" -AsSecureString
                    $plainTextPass1 = [Runtime.InteropServices.Marshal]::PtrToStringAuto([Runtime.InteropServices.Marshal]::SecureStringToBSTR($pass1))
                    $pass2 = Read-Host "Re-enter password" -AsSecureString
                    $plainTextPass2 = [Runtime.InteropServices.Marshal]::PtrToStringAuto([Runtime.InteropServices.Marshal]::SecureStringToBSTR($pass2))
                    if ($plainTextPass1 -ne $plainTextPass2) {
                        throw "Validation error, passwords entered do not match."
                    }
                    $plainTextPass = $plainTextPass1
                } else {
                    $plainTextPass = [Runtime.InteropServices.Marshal]::PtrToStringAuto([Runtime.InteropServices.Marshal]::SecureStringToBSTR($Password))
                }

                $catalog = New-Object "$ISNamespace.Catalog" ($destinationSSIS, "SSISDB", $plainTextPass)
                $catalog.Create()
                $catalog.Refresh()
            }
        }

        try {
            $sourceServer = Connect-SqlInstance -SqlInstance $Source -SqlCredential $SourceSqlCredential -MinimumVersion 11
        } catch {
            Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $Source
            return
        }

        try {
            $sourceSSIS = New-Object Microsoft.SqlServer.Management.IntegrationServices.IntegrationServices $sourceServer
        } catch {
            Stop-Function -Message "There was an error connecting to the source integration services." -Target $sourceServer -ErrorRecord $_
            return
        }

        $sourceCatalog = $sourceSSIS.Catalogs | Where-Object {
            $_.Name -eq "SSISDB"
        }
        if (!$sourceCatalog) {
            Stop-Function -Message "The source SSISDB catalog on $Source does not exist."
            return
        }
        $sourceFolders = $sourceCatalog.Folders
    }
    process {
        if (Test-FunctionInterrupt) {
            return
        }
        foreach ($destinstance in $Destination) {
            try {
                $destinationConnection = Connect-SqlInstance -SqlInstance $destinstance -SqlCredential $DestinationSqlCredential -MinimumVersion 1
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $destinstance -Continue
            }

            try {
                Get-RemoteIntegrationService -Computer $destinstance.ComputerName
            } catch {
                Stop-Function -Message "An error occurred when checking the destination for Integration Services. Is Integration Services installed?" -Target $destinstance -ErrorRecord $_
            }

            try {
                $destinationSSIS = New-Object Microsoft.SqlServer.Management.IntegrationServices.IntegrationServices $destinationConnection
            } catch {
                Stop-Function -Message "There was an error connecting to the destination integration services." -Target $destinationCon -ErrorRecord $_
            }

            $destinationCatalog = $destinationSSIS.Catalogs | Where-Object {
                $_.Name -eq "SSISDB"
            }
            $destinationFolders = $destinationCatalog.Folders

            if (!$destinationCatalog) {
                if (!$destinationConnection.Configuration.IsSqlClrEnabled.ConfigValue) {
                    if ($Pscmdlet.ShouldProcess($destinstance, "Enabling SQL CLR configuration option.")) {
                        if (!$EnableSqlClr) {
                            $message = "The destination does not have SQL CLR configuration option enabled (required by SSISDB), would you like to enable it?"
                            $yes = New-Object System.Management.Automation.Host.ChoiceDescription "&Yes", "Enable SQL CLR on $destinstance."
                            $no = New-Object System.Management.Automation.Host.ChoiceDescription "&No", "Exit."
                            $options = [System.Management.Automation.Host.ChoiceDescription[]]($yes, $no)
                            $result = $host.ui.PromptForChoice($null, $message, $options, 0)
                            switch ($result) {
                                0 {
                                    continue
                                }
                                1 {
                                    return
                                }
                            }
                        }
                        Write-Message -Level Verbose -Message "Enabling SQL CLR configuration option at the destination."
                        if ($destinationConnection.Configuration.ShowAdvancedOptions.ConfigValue -eq $false) {
                            $destinationConnection.Configuration.ShowAdvancedOptions.ConfigValue = $true
                            $changeback = $true
                        }

                        $destinationConnection.Configuration.IsSqlClrEnabled.ConfigValue = $true

                        if ($changeback -eq $true) {
                            $destinationConnection.Configuration.ShowAdvancedOptions.ConfigValue = $false
                        }
                        $destinationConnection.Configuration.Alter()
                    }
                } else {
                    Write-Message -Level Verbose -Message "SQL CLR configuration option is already enabled at the destination."
                }
                if ($Pscmdlet.ShouldProcess($destinstance, "Create destination SSISDB Catalog")) {
                    if (!$CreateCatalogPassword) {
                        $message = "The destination SSISDB catalog does not exist, would you like to create one?"
                        $yes = New-Object System.Management.Automation.Host.ChoiceDescription "&Yes", "Create an SSISDB catalog on $destinstance."
                        $no = New-Object System.Management.Automation.Host.ChoiceDescription "&No", "Exit."
                        $options = [System.Management.Automation.Host.ChoiceDescription[]]($yes, $no)
                        $result = $host.ui.PromptForChoice($null, $message, $options, 0)
                        switch ($result) {
                            0 {
                                New-SSISDBCatalog
                            }
                            1 {
                                return
                            }
                        }
                    } else {
                        New-SSISDBCatalog -SecurePassword $CreateCatalogPassword
                    }

                    $destinationSSIS.Refresh()
                    $destinationCatalog = $destinationSSIS.Catalogs | Where-Object {
                        $_.Name -eq "SSISDB"
                    }
                    $destinationFolders = $destinationCatalog.Folders
                } else {
                    throw "The destination SSISDB catalog does not exist."
                }
            }
            if ($folder) {
                if ($sourceFolders.Name -contains $folder) {
                    $srcFolder = $sourceFolders | Where-Object {
                        $_.Name -eq $folder
                    }
                    if ($destinationFolders.Name -contains $folder) {
                        if (!$force) {
                            Write-Message -Level Warning -Message "Integration services catalog folder $folder exists at destination. Use -Force to drop and recreate."
                        } else {
                            if ($Pscmdlet.ShouldProcess($destinstance, "Dropping folder $folder and recreating")) {
                                try {
                                    New-CatalogFolder -Folder $srcFolder.Name -Description $srcFolder.Description -Force
                                } catch {
                                    Stop-Function -Message "Issue dropping folder" -Target $folder -ErrorRecord $_
                                }

                            }
                        }
                    } else {
                        if ($Pscmdlet.ShouldProcess($destinstance, "Creating folder $folder")) {
                            try {
                                New-CatalogFolder -Folder $srcFolder.Name -Description $srcFolder.Description
                            } catch {
                                Stop-Function -Message "Issue creating folder" -Target $folder -ErrorRecord $_
                            }
                        }
                    }
                } else {
                    throw "The source folder provided does not exist in the source Integration Services catalog."
                }
            } else {
                foreach ($srcFolder in $sourceFolders) {
                    if ($destinationFolders.Name -notcontains $srcFolder.Name) {
                        if ($Pscmdlet.ShouldProcess($destinstance, "Creating folder $($srcFolder.Name)")) {
                            try {
                                New-CatalogFolder -Folder $srcFolder.Name -Description $srcFolder.Description
                            } catch {
                                Stop-Function -Message "Issue creating folder" -Target $srcFolder -ErrorRecord $_ -Continue
                            }
                        }
                    } else {
                        if (!$force) {
                            Write-Message -Level Warning -Message "Integration services catalog folder $($srcFolder.Name) exists at destination. Use -Force to drop and recreate."
                            continue
                        } else {
                            if ($Pscmdlet.ShouldProcess($destinstance, "Dropping folder $($srcFolder.Name) and recreating")) {
                                try {
                                    New-CatalogFolder -Folder $srcFolder.Name -Description $srcFolder.Description -Force
                                } catch {
                                    Stop-Function -Message "Issue dropping folder" -Target $srcFolder -ErrorRecord $_
                                }
                            }
                        }
                    }
                }
            }

            # Refresh folders for project and environment deployment
            if ($Pscmdlet.ShouldProcess($destinstance, "Refresh folders for project deployment")) {
                try {
                    $destinationFolders.Alter()
                } catch {
                    # Sometimes it says Alter() doesn't exist
                    # here to avoid an empty catch
                    $null = 1
                }
                $destinationFolders.Refresh()
            }

            if ($folder) {
                $sourceFolders = $sourceFolders | Where-Object {
                    $_.Name -eq $folder
                }
                if (!$sourceFolders) {
                    throw "The source folder $folder does not exist in the source Integration Services catalog."
                }
            }
            if ($project) {
                $folderDeploy = $sourceFolders | Where-Object {
                    $_.Projects.Name -eq $project
                }
                if (!$folderDeploy) {
                    throw "The project $project cannot be found in the source Integration Services catalog."
                } else {
                    foreach ($f in $folderDeploy) {
                        if ($Pscmdlet.ShouldProcess($destinstance, "Deploying project $project from folder $($f.Name)")) {
                            try {
                                Invoke-ProjectDeployment -Folder $f.Name -Project $project
                            } catch {
                                Stop-Function -Message "Issue deploying project" -Target $project -ErrorRecord $_
                            }
                        }
                    }
                }
            } else {
                foreach ($curFolder in $sourceFolders) {
                    foreach ($proj in $curFolder.Projects) {
                        if ($Pscmdlet.ShouldProcess($destinstance, "Deploying project $($proj.Name) from folder $($curFolder.Name)")) {
                            try {
                                Invoke-ProjectDeployment -Project $proj.Name -Folder $curFolder.Name
                            } catch {
                                Stop-Function -Message "Issue deploying project" -Target $proj -ErrorRecord $_
                            }
                        }
                    }
                }
            }

            if ($environment) {
                $folderDeploy = $sourceFolders | Where-Object {
                    $_.Environments.Name -eq $environment
                }
                if (!$folderDeploy) {
                    throw "The environment $environment cannot be found in the source Integration Services catalog."
                } else {
                    foreach ($f in $folderDeploy) {
                        if ($destinationFolders[$f.Name].Environments.Name -notcontains $environment) {
                            if ($Pscmdlet.ShouldProcess($destinstance, "Deploying environment $environment from folder $($f.Name)")) {
                                try {
                                    New-FolderEnvironment -Folder $f.Name -Environment $environment
                                } catch {
                                    Stop-Function -Message "Issue deploying environment" -Target $environment -ErrorRecord $_
                                }
                            }
                        } else {
                            if (!$force) {
                                Write-Message -Level Warning -Message "Integration services catalog environment $environment exists in folder $($f.Name) at destination. Use -Force to drop and recreate."
                            } else {
                                If ($Pscmdlet.ShouldProcess($destinstance, "Dropping existing environment $environment and deploying environment $environment from folder $($f.Name)")) {
                                    try {
                                        New-FolderEnvironment -Folder $f.Name -Environment $environment -Force
                                    } catch {
                                        Stop-Function -Message "Issue dropping existing environment" -Target $environment -ErrorRecord $_
                                    }
                                }
                            }
                        }
                    }
                }
            } else {
                foreach ($curFolder in $sourceFolders) {
                    foreach ($env in $curFolder.Environments) {
                        if ($destinationFolders[$curFolder.Name].Environments.Name -notcontains $env.Name) {
                            if ($Pscmdlet.ShouldProcess($destinstance, "Deploying environment $($env.Name) from folder $($curFolder.Name)")) {
                                try {
                                    New-FolderEnvironment -Environment $env.Name -Folder $curFolder.Name
                                } catch {
                                    Stop-Function -Message "Issue deploying environment" -Target $env -ErrorRecord $_
                                }
                            }
                        } else {
                            if (!$force) {
                                Write-Message -Level Warning -Message "Integration services catalog environment $($env.Name) exists in folder $($curFolder.Name) at destination. Use -Force to drop and recreate."
                                continue
                            } else {
                                if ($Pscmdlet.ShouldProcess($destinstance, "Deploying environment $($env.Name) from folder $($curFolder.Name)")) {
                                    try {
                                        New-FolderEnvironment -Environment $env.Name -Folder $curFolder.Name -Force
                                    } catch {
                                        Stop-Function -Message "Issue deploying environment" -Target $env -ErrorRecord $_
                                    }
                                }
                            }
                        }
                    }
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Copy-SqlSsisCatalog
    }
}

tools\dbatools\functions\Copy-DbaSysDbUserObject.ps1

function Copy-DbaSysDbUserObject {
    <#
    .SYNOPSIS
        Imports all user objects found in source SQL Server's master, msdb and model databases to the destination.

    .DESCRIPTION
        Imports all user objects found in source SQL Server's master, msdb and model databases to the destination. This is useful because many DBAs store backup/maintenance procs/tables/triggers/etc (among other things) in master or msdb.

        It is also useful for migrating objects within the model database.

    .PARAMETER Source
        Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.

    .PARAMETER SourceSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Destination
        Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.

    .PARAMETER DestinationSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Classic
        Perform the migration the old way

    .PARAMETER Force
        Drop destination objects first. Has no effect if you use Classic. This doesn't work really well, honestly.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Migration, SystemDatabase, UserObject
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Copy-DbaSysDbUserObject

    .EXAMPLE
        PS C:\> Copy-DbaSysDbUserObject -Source $sourceServer -Destination $destserver

        Copies user objects from source to destination

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [DbaInstanceParameter]$Source,
        [PSCredential]$SourceSqlCredential,
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [DbaInstanceParameter[]]$Destination,
        [PSCredential]$DestinationSqlCredential,
        [switch]$Force,
        [switch]$Classic,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {
        function get-sqltypename ($type) {
            switch ($type) {
                "VIEW" { "view" }
                "SQL_TABLE_VALUED_FUNCTION" { "User table valued fsunction" }
                "DEFAULT_CONSTRAINT" { "User default constraint" }
                "SQL_STORED_PROCEDURE" { "User stored procedure" }
                "RULE" { "User rule" }
                "SQL_INLINE_TABLE_VALUED_FUNCTION" { "User inline table valued function" }
                "SQL_TRIGGER" { "User server trigger" }
                "SQL_SCALAR_FUNCTION" { "User scalar function" }
                default { $type }
            }
        }
    }
    process {
        try {
            $sourceServer = Connect-SqlInstance -SqlInstance $Source -SqlCredential $SourceSqlCredential
        } catch {
            Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $Source
            return
        }

        if (!(Test-SqlSa -SqlInstance $sourceServer -SqlCredential $SourceSqlCredential)) {
            Stop-Function -Message "Not a sysadmin on $source. Quitting."
            return
        }

        if (Test-FunctionInterrupt) { return }
        foreach ($destinstance in $Destination) {
            try {
                $destServer = Connect-SqlInstance -SqlInstance $destinstance -SqlCredential $DestinationSqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $destinstance -Continue
            }

            if (!(Test-SqlSa -SqlInstance $destServer -SqlCredential $DestinationSqlCredential)) {
                Stop-Function -Message "Not a sysadmin on $destinstance" -Continue
            }

            $systemDbs = "master", "model", "msdb"

            if (-not $Classic) {
                foreach ($systemDb in $systemDbs) {
                    $smodb = $sourceServer.databases[$systemDb]
                    $destdb = $destserver.databases[$systemDb]

                    $tables = $smodb.Tables | Where-Object IsSystemObject -ne $true
                    $schemas = $smodb.Schemas | Where-Object IsSystemObject -ne $true

                    foreach ($schema in $schemas) {
                        $copyobject = [pscustomobject]@{
                            SourceServer      = $sourceServer.Name
                            DestinationServer = $destServer.Name
                            Name              = $schema
                            Type              = "User schema in $systemDb"
                            Status            = $null
                            Notes             = $null
                            DateTime          = [Sqlcollaborative.Dbatools.Utility.DbaDateTime](Get-Date)
                        }

                        $destschema = $destdb.Schemas | Where-Object Name -eq $schema.Name
                        $schmadoit = $true

                        if ($destschema) {
                            if (-not $force) {
                                $copyobject.Status = "Skipped"
                                $copyobject.Notes = "Already exists on destination"
                                $schmadoit = $false
                            } else {
                                if ($PSCmdlet.ShouldProcess($destServer, "Dropping schema $schema in $systemDb")) {
                                    try {
                                        Write-Message -Level Verbose -Message "Force specified. Dropping $schema in $destdb on $destinstance"
                                        $destschema.Drop()
                                    } catch {
                                        $schmadoit = $false
                                        $copyobject.Status = "Failed"
                                        $copyobject.Notes = $_.Exception.InnerException.InnerException.InnerException.Message
                                    }
                                }
                            }
                        }

                        if ($schmadoit) {
                            $transfer = New-Object Microsoft.SqlServer.Management.Smo.Transfer $smodb
                            $null = $transfer.CopyAllObjects = $false
                            $null = $transfer.Options.WithDependencies = $true
                            $null = $transfer.ObjectList.Add($schema)
                            if ($PSCmdlet.ShouldProcess($destServer, "Attempting to add schema $($schema.Name) to $systemDb")) {
                                try {
                                    $sql = $transfer.ScriptTransfer()
                                    Write-Message -Level Debug -Message "$sql"
                                    $null = $destServer.Query($sql, $systemDb)
                                    $copyobject.Status = "Successful"
                                    $copyobject.Notes = "May have also created dependencies"
                                } catch {
                                    $copyobject.Status = "Failed"
                                    $copyobject.Notes = (Get-ErrorMessage -Record $_)
                                }
                            }
                        }

                        $copyobject | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                    }

                    foreach ($table in $tables) {
                        $copyobject = [pscustomobject]@{
                            SourceServer      = $sourceServer.Name
                            DestinationServer = $destServer.Name
                            Name              = $table
                            Type              = "User table in $systemDb"
                            Status            = $null
                            Notes             = $null
                            DateTime          = [Sqlcollaborative.Dbatools.Utility.DbaDateTime](Get-Date)
                        }

                        $desttable = $destdb.Tables.Item($table.Name, $table.Schema)
                        $doit = $true

                        if ($desttable) {
                            if (-not $force) {
                                $copyobject.Status = "Skipped"
                                $copyobject.Notes = "Already exists on destination"
                                $doit = $false
                            } else {
                                if ($PSCmdlet.ShouldProcess($destServer, "Dropping table $table in $systemDb")) {
                                    try {
                                        Write-Message -Level Verbose -Message "Force specified. Dropping $table in $destdb on $destinstance"
                                        $desttable.Drop()
                                    } catch {
                                        $doit = $false
                                        $copyobject.Status = "Failed"
                                        $copyobject.Notes = $_.Exception.InnerException.InnerException.InnerException.Message
                                    }
                                }
                            }
                        }

                        if ($doit) {
                            $transfer = New-Object Microsoft.SqlServer.Management.Smo.Transfer $smodb
                            $null = $transfer.CopyAllObjects = $false
                            $null = $transfer.Options.WithDependencies = $true
                            $null = $transfer.ObjectList.Add($table)
                            if ($PSCmdlet.ShouldProcess($destServer, "Attempting to add table $table to $systemDb")) {
                                try {
                                    $sql = $transfer.ScriptTransfer()
                                    Write-Message -Level Debug -Message "$sql"
                                    $null = $destServer.Query($sql, $systemDb)
                                    $copyobject.Status = "Successful"
                                    $copyobject.Notes = "May have also created dependencies"
                                } catch {
                                    $copyobject.Status = "Failed"
                                    $copyobject.Notes = (Get-ErrorMessage -Record $_)
                                }
                            }
                        }
                        $copyobject | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                    }

                    $userobjects = Get-DbaModule -SqlInstance $sourceserver -Database $systemDb -ExcludeSystemObjects | Sort-Object Type
                    Write-Message -Level Verbose -Message "Copying from $systemDb"
                    foreach ($userobject in $userobjects) {

                        $name = "[$($userobject.SchemaName)].[$($userobject.Name)]"
                        $db = $userobject.Database
                        $type = get-sqltypename $userobject.Type
                        $sql = $userobject.Definition
                        $schema = $userobject.SchemaName

                        $copyobject = [pscustomobject]@{
                            SourceServer      = $sourceServer.Name
                            DestinationServer = $destServer.Name
                            Name              = $name
                            Type              = "$type in $systemDb"
                            Status            = $null
                            Notes             = $null
                            DateTime          = [Sqlcollaborative.Dbatools.Utility.DbaDateTime](Get-Date)
                        }
                        Write-Message -Level Debug -Message $sql
                        try {
                            Write-Message -Level Verbose -Message "Searching for $name in $db on $destinstance"
                            $result = Get-DbaModule -SqlInstance $destServer -ExcludeSystemObjects -Database $db |
                                Where-Object { $psitem.Name -eq $userobject.Name -and $psitem.Type -eq $userobject.Type }
                            if ($result) {
                                Write-Message -Level Verbose -Message "Found $name in $db on $destinstance"
                                if (-not $Force) {
                                    $copyobject.Status = "Skipped"
                                    $copyobject.Notes = "Already exists on destination"
                                } else {
                                    $smobject = switch ($userobject.Type) {
                                        "VIEW" { $smodb.Views.Item($userobject.Name, $userobject.SchemaName) }
                                        "SQL_STORED_PROCEDURE" { $smodb.StoredProcedures.Item($userobject.Name, $userobject.SchemaName) }
                                        "RULE" { $smodb.Rules.Item($userobject.Name, $userobject.SchemaName) }
                                        "SQL_TRIGGER" { $smodb.Triggers.Item($userobject.Name, $userobject.SchemaName) }
                                        "SQL_TABLE_VALUED_FUNCTION" { $smodb.UserDefinedFunctions.Item($name) }
                                        "SQL_INLINE_TABLE_VALUED_FUNCTION" { $smodb.UserDefinedFunctions.Item($name) }
                                        "SQL_SCALAR_FUNCTION" { $smodb.UserDefinedFunctions.Item($name) }
                                    }

                                    if ($smobject) {
                                        Write-Message -Level Verbose -Message "Force specified. Dropping $smobject on $destdb on $destinstance using SMO"
                                        $transfer = New-Object Microsoft.SqlServer.Management.Smo.Transfer $smodb
                                        $null = $transfer.CopyAllObjects = $false
                                        $null = $transfer.Options.WithDependencies = $true
                                        $null = $transfer.ObjectList.Add($smobject)
                                        $null = $transfer.Options.ScriptDrops = $true
                                        $dropsql = $transfer.ScriptTransfer()
                                        Write-Message -Level Debug -Message "$dropsql"
                                        if ($PSCmdlet.ShouldProcess($destServer, "Attempting to drop $type $name from $systemDb")) {
                                            $null = $destdb.Query("$dropsql")
                                        }
                                    } else {
                                        if ($PSCmdlet.ShouldProcess($destServer, "Attempting to drop $type $name from $systemDb using T-SQL")) {
                                            $null = $destdb.Query("DROP FUNCTION $($userobject.name)")
                                        }
                                    }
                                    if ($PSCmdlet.ShouldProcess($destServer, "Attempting to add $type $name to $systemDb")) {
                                        $null = $destdb.Query("$sql")
                                        $copyobject.Status = "Successful"
                                    }
                                }
                            } else {
                                if ($PSCmdlet.ShouldProcess($destServer, "Attempting to add $type $name to $systemDb")) {
                                    $null = $destdb.Query("$sql")
                                    $copyobject.Status = "Successful"
                                }
                            }
                        } catch {
                            try {
                                $smobject = switch ($userobject.Type) {
                                    "VIEW" { $smodb.Views.Item($userobject.Name, $userobject.SchemaName) }
                                    "SQL_STORED_PROCEDURE" { $smodb.StoredProcedures.Item($userobject.Name, $userobject.SchemaName) }
                                    "RULE" { $smodb.Rules.Item($userobject.Name, $userobject.SchemaName) }
                                    "SQL_TRIGGER" { $smodb.Triggers.Item($userobject.Name, $userobject.SchemaName) }
                                }
                                if ($smobject) {
                                    $transfer = New-Object Microsoft.SqlServer.Management.Smo.Transfer $smodb
                                    $null = $transfer.CopyAllObjects = $false
                                    $null = $transfer.Options.WithDependencies = $true
                                    $null = $transfer.ObjectList.Add($smobject)
                                    $sql = $transfer.ScriptTransfer()
                                    Write-Message -Level Debug -Message "$sql"
                                    Write-Message -Level Verbose -Message "Adding $smoobject on $destdb on $destinstance"
                                    if ($PSCmdlet.ShouldProcess($destServer, "Attempting to add $type $name to $systemDb")) {
                                        $null = $destdb.Query("$sql")
                                    }
                                    $copyobject.Status = "Successful"
                                    $copyobject.Notes = "May have also installed dependencies"
                                } else {
                                    $copyobject.Status = "Failed"
                                    $copyobject.Notes = (Get-ErrorMessage -Record $_)
                                }
                            } catch {
                                $copyobject.Status = "Failed"
                                $copyobject.Notes = (Get-ErrorMessage -Record $_)
                            }
                        }
                        $copyobject | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                    }
                }
            } else {
                foreach ($systemDb in $systemDbs) {
                    $sysdb = $sourceServer.databases[$systemDb]
                    $transfer = New-Object Microsoft.SqlServer.Management.Smo.Transfer $sysdb
                    $transfer.CopyAllObjects = $false
                    $transfer.CopyAllDatabaseTriggers = $true
                    $transfer.CopyAllDefaults = $true
                    $transfer.CopyAllRoles = $true
                    $transfer.CopyAllRules = $true
                    $transfer.CopyAllSchemas = $true
                    $transfer.CopyAllSequences = $true
                    $transfer.CopyAllSqlAssemblies = $true
                    $transfer.CopyAllSynonyms = $true
                    $transfer.CopyAllTables = $true
                    $transfer.CopyAllViews = $true
                    $transfer.CopyAllStoredProcedures = $true
                    $transfer.CopyAllUserDefinedAggregates = $true
                    $transfer.CopyAllUserDefinedDataTypes = $true
                    $transfer.CopyAllUserDefinedTableTypes = $true
                    $transfer.CopyAllUserDefinedTypes = $true
                    $transfer.CopyAllUserDefinedFunctions = $true
                    $transfer.CopyAllUsers = $true
                    $transfer.PreserveDbo = $true
                    $transfer.Options.AllowSystemObjects = $false
                    $transfer.Options.ContinueScriptingOnError = $true
                    $transfer.Options.IncludeDatabaseRoleMemberships = $true
                    $transfer.Options.Indexes = $true
                    $transfer.Options.Permissions = $true
                    $transfer.Options.WithDependencies = $false

                    Write-Message -Level Output -Message "Copying from $systemDb."
                    try {
                        $sqlQueries = $transfer.ScriptTransfer()

                        foreach ($sql in $sqlQueries) {
                            Write-Message -Level Debug -Message "$sql"
                            if ($PSCmdlet.ShouldProcess($destServer, $sql)) {
                                try {
                                    $destServer.Query($sql, $systemDb)
                                } catch {
                                    # Don't care - long story having to do with duplicate stuff
                                    # here to avoid an empty catch
                                    $null = 1
                                }
                            }
                        }
                    } catch {
                        # Don't care - long story having to do with duplicate stuff
                        # here to avoid an empty catch
                        $null = 1
                    }
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Copy-SqlSysDbUserObjects
    }
}

tools\dbatools\functions\Copy-DbaXESession.ps1

function Copy-DbaXESession {
    <#
    .SYNOPSIS
        Migrates SQL Extended Event Sessions except the two default sessions, AlwaysOn_health and system_health.

    .DESCRIPTION
        Migrates SQL Extended Event Sessions except the two default sessions, AlwaysOn_health and system_health.

        By default, all non-system Extended Events are migrated.

    .PARAMETER Source
        Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.

    .PARAMETER SourceSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Destination
        Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.

    .PARAMETER DestinationSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER XeSession
        The Extended Event Session(s) to process. This list is auto-populated from the server. If unspecified, all Extended Event Sessions will be processed.

    .PARAMETER ExcludeXeSession
        The Extended Event Session(s) to exclude. This list is auto-populated from the server.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER Force
        If this switch is enabled, existing Extended Events sessions on Destination with matching names from Source will be dropped.

    .NOTES
        Tags: Migration, ExtendedEvent, XEvent
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        Requires: sysadmin access on SQL Servers

    .LINK
        https://dbatools.io/Copy-DbaXESession

    .EXAMPLE
        PS C:\> Copy-DbaXESession -Source sqlserver2014a -Destination sqlcluster

        Copies all Extended Event sessions from sqlserver2014a to sqlcluster using Windows credentials.

    .EXAMPLE
        PS C:\> Copy-DbaXESession -Source sqlserver2014a -Destination sqlcluster -SourceSqlCredential $cred

        Copies all Extended Event sessions from sqlserver2014a to sqlcluster using SQL credentials for sqlserver2014a and Windows credentials for sqlcluster.

    .EXAMPLE
        PS C:\> Copy-DbaXESession -Source sqlserver2014a -Destination sqlcluster -WhatIf

        Shows what would happen if the command were executed.

    .EXAMPLE
        PS C:\> Copy-DbaXESession -Source sqlserver2014a -Destination sqlcluster -XeSession CheckQueries, MonitorUserDefinedException

        Copies only the Extended Events named CheckQueries and MonitorUserDefinedException from sqlserver2014a to sqlcluster.

    #>
    [CmdletBinding(DefaultParameterSetName = "Default", SupportsShouldProcess)]
    param (
        [parameter(Mandatory)]
        [DbaInstanceParameter]$Source,
        [parameter(Mandatory)]
        [DbaInstanceParameter[]]$Destination,
        [PSCredential]
        $SourceSqlCredential,
        [PSCredential]
        $DestinationSqlCredential,
        [object[]]$XeSession,
        [object[]]$ExcludeXeSession,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias Copy-DbaExtendedEvent
        try {
            $sourceServer = Connect-SqlInstance -SqlInstance $Source -SqlCredential $SourceSqlCredential -MinimumVersion 11
        } catch {
            Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $Source
            return
        }
        $sourceSqlConn = $sourceServer.ConnectionContext.SqlConnectionObject
        $sourceSqlStoreConnection = New-Object Microsoft.SqlServer.Management.Sdk.Sfc.SqlStoreConnection $sourceSqlConn
        $sourceStore = New-Object  Microsoft.SqlServer.Management.XEvent.XEStore $sourceSqlStoreConnection
        $storeSessions = $sourceStore.Sessions | Where-Object { $_.Name -notin 'AlwaysOn_health', 'system_health' }
        if ($XeSession) {
            $storeSessions = $storeSessions | Where-Object Name -In $XeSession
        }
        if ($ExcludeXeSession) {
            $storeSessions = $storeSessions | Where-Object Name -NotIn $ExcludeXeSession
        }
    }
    process {
        if (Test-FunctionInterrupt) { return }
        foreach ($destinstance in $Destination) {
            try {
                $destServer = Connect-SqlInstance -SqlInstance $destinstance -SqlCredential $DestinationSqlCredential -MinimumVersion 11
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $destinstance -Continue
            }

            $destSqlConn = $destServer.ConnectionContext.SqlConnectionObject
            $destSqlStoreConnection = New-Object Microsoft.SqlServer.Management.Sdk.Sfc.SqlStoreConnection $destSqlConn
            $destStore = New-Object  Microsoft.SqlServer.Management.XEvent.XEStore $destSqlStoreConnection

            Write-Message -Level Verbose -Message "Migrating sessions."
            foreach ($session in $storeSessions) {
                $sessionName = $session.Name

                $copyXeSessionStatus = [pscustomobject]@{
                    SourceServer      = $sourceServer.Name
                    DestinationServer = $destServer.Name
                    Name              = $sessionName
                    Type              = "Extended Event"
                    Status            = $null
                    Notes             = $null
                    DateTime          = [DbaDateTime](Get-Date)
                }

                if ($null -ne $destStore.Sessions[$sessionName]) {
                    if ($force -eq $false) {
                        if ($Pscmdlet.ShouldProcess($destinstance, "Extended Event Session '$sessionName' was skipped because it already exists on $destinstance.")) {
                            $copyXeSessionStatus.Status = "Skipped"
                            $copyXeSessionStatus.Notes = "Already exists on destination"
                            $copyXeSessionStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                            Write-Message -Level Verbose -Message "Extended Event Session '$sessionName' was skipped because it already exists on $destinstance."
                            Write-Message -Level Verbose -Message "Use -Force to drop and recreate."
                        }
                        continue
                    } else {
                        if ($Pscmdlet.ShouldProcess($destinstance, "Attempting to drop $sessionName")) {
                            Write-Message -Level Verbose -Message "Extended Event Session '$sessionName' exists on $destinstance."
                            Write-Message -Level Verbose -Message "Force specified. Dropping $sessionName."

                            try {
                                $destStore.Sessions[$sessionName].Drop()
                            } catch {
                                $copyXeSessionStatus.Status = "Failed"
                                $copyXeSessionStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                                Stop-Function -Message "Unable to drop session. Moving on." -Target $sessionName -ErrorRecord $_ -Continue
                            }
                        }
                    }
                }

                if ($Pscmdlet.ShouldProcess($destinstance, "Migrating session $sessionName")) {
                    try {
                        $sql = $session.ScriptCreate().GetScript() | Out-String

                        Write-Message -Level Debug -Message $sql
                        Write-Message -Level Verbose -Message "Migrating session $sessionName."
                        $null = $destServer.Query($sql)

                        if ($session.IsRunning -eq $true) {
                            $destStore.Sessions.Refresh()
                            $destStore.Sessions[$sessionName].Start()
                        }

                        $copyXeSessionStatus.Status = "Successful"
                        $copyXeSessionStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject
                    } catch {
                        $copyXeSessionStatus.Status = "Failed"
                        $copyXeSessionStatus | Select-DefaultView -Property DateTime, SourceServer, DestinationServer, Name, Type, Status, Notes -TypeName MigrationObject

                        Stop-Function -Message "Unable to create session." -Target $sessionName -ErrorRecord $_
                    }
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Copy-SqlExtendedEvent
    }
}

tools\dbatools\functions\Copy-DbaXESessionTemplate.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Copy-DbaXESessionTemplate {
    <#
    .SYNOPSIS
        Copies non-Microsoft templates from the dbatools template repository (\bin\xetemplates\) to $home\Documents\SQL Server Management Studio\Templates\XEventTemplates.

    .DESCRIPTION
        Copies non-Microsoft templates from the dbatools template repository (\bin\xetemplates\) to $home\Documents\SQL Server Management Studio\Templates\XEventTemplates.

        Useful for when you want to use the SSMS GUI.

    .PARAMETER Path
        The path to the template directory. Defaults to the dbatools template repository (\bin\xetemplates\).

    .PARAMETER Destination
        Path to the Destination directory, defaults to $home\Documents\SQL Server Management Studio\Templates\XEventTemplates.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: ExtendedEvent, XE, XEvent
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Copy-DbaXESessionTemplate

    .EXAMPLE
        PS C:\> Copy-DbaXESessionTemplate

        Copies non-Microsoft templates from the dbatools template repository (\bin\xetemplates\) to $home\Documents\SQL Server Management Studio\Templates\XEventTemplates.

    .EXAMPLE
        PS C:\> Copy-DbaXESessionTemplate -Path C:\temp\xetemplates

        Copies your templates from C:\temp\xetemplates to $home\Documents\SQL Server Management Studio\Templates\XEventTemplates.

    #>
    [CmdletBinding()]
    param (
        [string[]]$Path = "$script:PSModuleRoot\bin\xetemplates",
        [string]$Destination = "$home\Documents\SQL Server Management Studio\Templates\XEventTemplates",
        [switch]$EnableException
    )
    process {
        if (Test-FunctionInterrupt) { return }
        foreach ($destinstance in $Destination) {
            if (-not (Test-Path -Path $destinstance)) {
                try {
                    $null = New-Item -ItemType Directory -Path $destinstance -ErrorAction Stop
                } catch {
                    Stop-Function -Message "Failure" -ErrorRecord $_ -Target $destinstance
                }
            }
            try {
                $files = (Get-DbaXESessionTemplate -Path $Path | Where-Object Source -ne Microsoft).Path
                foreach ($file in $files) {
                    Write-Message -Level Output -Message "Copying $($file.Name) to $destinstance."
                    Copy-Item -Path $file -Destination $destinstance -ErrorAction Stop
                }
            } catch {
                Stop-Function -Message "Failure" -ErrorRecord $_ -Target $path
            }
        }
    }
}

tools\dbatools\functions\Disable-DbaAgHadr.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Disable-DbaAgHadr {
    <#
    .SYNOPSIS
        Disables the Hadr service setting on the specified SQL Server.

    .DESCRIPTION
        In order to build an AG a cluster has to be built and then the Hadr enabled for the SQL Server
        service. This function disables that feature for the SQL Server service.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER Credential
        Credential object used to connect to the Windows server as a different user

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER Force
        Will restart SQL Server and SQL Server Agent service to apply the change.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Hadr, AG, AvailabilityGroup
        Author: Shawn Melton (@wsmelton), http://wsmelton.github.io

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Disable-DbaAgHadr

    .EXAMPLE
        PS C:\> Disable-DbaAgHadr -SqlInstance sql2016

        Sets Hadr service to disabled for the instance sql2016 but changes will not be applied until the next time the server restarts.

    .EXAMPLE
        PS C:\> Disable-DbaAgHadr -SqlInstance sql2016 -Force

        Sets Hadr service to disabled for the instance sql2016, and restart the service to apply the change.

    .EXAMPLE
        PS C:\> Disable-DbaAgHadr -SqlInstance sql2012\dev1 -Force

        Sets Hadr service to disabled for the instance dev1 on sq2012, and restart the service to apply the change.

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "High")]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$Credential,
        [switch]$Force,
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            $computer = $computerFullName = $instance.ComputerName
            $instanceName = $instance.InstanceName
            if (-not (Test-ElevationRequirement -ComputerName $instance)) {
                return
            }
            $noChange = $false

            <#
            #Variable marked as unused by PSScriptAnalyzer
            switch ($instance.InstanceName) {
                'MSSQLSERVER' { $agentName = 'SQLSERVERAGENT' }
                default { $agentName = "SQLAgent`$$instanceName" }
            }
            #>

            try {
                Write-Message -Level Verbose -Message "Checking current Hadr setting for $computer"
                $currentState = Get-WmiHadr -SqlInstance $instance -Credential $Credential
            } catch {
                Stop-Function -Message "Failure to pull current state of Hadr setting on $computer" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $isHadrEnabled = $currentState.IsHadrEnabled
            Write-Message -Level InternalComment -Message "$instance Hadr current value: $isHadrEnabled"

            # hadr results from sql wmi can be iffy, skip the check
            <#
            if (-not $isHadrEnabled) {
                Write-Message -Level Warning -Message "Hadr is already disabled for instance: $($instance.FullName)"
                $noChange = $true
                continue
            }
            #>

            $scriptblock = {
                $instance = $args[0]
                $sqlService = $wmi.Services | Where-Object DisplayName -eq "SQL Server ($instance)"
                $sqlService.ChangeHadrServiceSetting(0)
            }

            if ($noChange -eq $false) {
                if ($PSCmdlet.ShouldProcess($instance, "Changing Hadr from $isHadrEnabled to 0 for $instance")) {
                    try {
                        Invoke-ManagedComputerCommand -ComputerName $computerFullName -Credential $Credential -ScriptBlock $scriptblock -ArgumentList $instancename
                    } catch {
                        Stop-Function -Continue -Message "Failure on $($instance.FullName) | This may be because AlwaysOn Availability Groups feature requires the x86(non-WOW) or x64 Enterprise Edition of SQL Server 2012 (or later version) running on Windows Server 2008 (or later version) with WSFC hotfix KB 2494036 installed."
                    }
                }
                if (Test-Bound 'Force') {
                    if ($PSCmdlet.ShouldProcess($instance, "Force provided, restarting Engine and Agent service for $instance on $computerFullName")) {
                        try {
                            $null = Stop-DbaService -ComputerName $computerFullName -InstanceName $instanceName -Type Agent, Engine
                            $null = Start-DbaService -ComputerName $computerFullName -InstanceName $instanceName -Type Agent, Engine
                        } catch {
                            Stop-Function -Message "Issue restarting $instance" -Target $instance -Continue
                        }
                    }
                }
                $newState = Get-WmiHadr -SqlInstance $instance -Credential $Credential

                if (Test-Bound -Not -ParameterName Force) {
                    Write-Message -Level Warning -Message "You must restart the SQL Server for it to take effect."
                }

                [PSCustomObject]@{
                    ComputerName  = $newState.ComputerName
                    InstanceName  = $newState.InstanceName
                    SqlInstance   = $newState.SqlInstance
                    IsHadrEnabled = $false
                }
            }
        }
    }
}

tools\dbatools\functions\Disable-DbaFilestream.ps1

#ValidationTags#CodeStyle,Messaging,FlowControl,Pipeline#
function Disable-DbaFilestream {
    <#
    .SYNOPSIS
        Sets the status of FileStream on specified SQL Server instances both at the server level and the instance level

    .DESCRIPTION
        Connects to the specified SQL Server instances, and sets the status of the FileStream feature to the required value

        To perform the action, the SQL Server instance must be restarted. By default we will prompt for confirmation for this action, this can be overridden with the -Force switch

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. Defaults to localhost.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Credential
        Login to the target server using alternative credentials.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER Force
        Restart SQL Instance after changes. Use this parameter with care as it overrides whatif.

    .PARAMETER WhatIf
        Shows what would happen if the command runs. The command is not run unless Force is specified.

    .PARAMETER Confirm
        Prompts you for confirmation before running the command.

    .NOTES
        Tags: Filestream
        Author: Stuart Moore ( @napalmgram ) | Chrissy LeMaire ( @cl )
        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Disable-DbaFilestream -SqlInstance server1\instance2

        Prompts for confirmation. Disables filestream on the service and instance levels.

    .EXAMPLE
        PS C:\> Disable-DbaFilestream -SqlInstance server1\instance2 -Confirm:$false

        Does not prompt for confirmation. Disables filestream on the service and instance levels.

    .EXAMPLE
        PS C:\> Get-DbaFilestream -SqlInstance server1\instance2, server5\instance5, prod\hr | Where-Object InstanceAccessLevel -gt 0 | Disable-DbaFilestream -Force

        Using this pipeline you can scan a range of SQL instances and disable filestream on only those on which it's enabled.

       #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "High")]
    param (
        [Parameter(Mandatory, ValueFromPipelineByPropertyName)]
        [DbaInstance[]]$SqlInstance,
        [Parameter(ValueFromPipelineByPropertyName)]
        [PSCredential]$SqlCredential,
        [Parameter(ValueFromPipelineByPropertyName)]
        [PSCredential]$Credential,
        [switch]$Force,
        [switch]$EnableException
    )
    begin {
        $FileStreamLevel = $level = 0

        $OutputLookup = @{
            0 = 'Disabled'
            1 = 'FileStream enabled for T-Sql access'
            2 = 'FileStream enabled for T-Sql and IO streaming access'
            3 = 'FileStream enabled for T-Sql, IO streaming, and remote clients'
        }
    }
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure connecting to $computer" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            # Instance level
            $filestreamstate = [int]$server.Configuration.FilestreamAccessLevel.RunningValue

            if ($Force -or $PSCmdlet.ShouldProcess($instance, "Changing from '$($OutputLookup[$filestreamstate])' to '$($OutputLookup[$level])' at the instance level")) {
                try {
                    $null = Set-DbaSpConfigure -SqlInstance $server -Name FilestreamAccessLevel -Value $level -EnableException
                } catch {
                    Stop-Function -Message "Failure" -ErrorRecord $_ -Continue
                }


                # Server level
                if ($server.IsClustered) {
                    $nodes = Get-DbaWsfcNode -ComputerName $instance -Credential $Credential
                    foreach ($node in $nodes.Name) {
                        $result = Set-FileSystemSetting -Instance $node -Credential $Credential -FilestreamLevel $FileStreamLevel
                    }
                } else {
                    $result = Set-FileSystemSetting -Instance $instance -Credential $Credential -FilestreamLevel $FileStreamLevel
                }

                if ($Force) {
                    #$restart replaced with $null as it was identified as a unused variable
                    $null = Restart-DbaService -ComputerName $instance.ComputerName -InstanceName $server.ServiceName -Type Engine -Force
                }

                Get-DbaFilestream -SqlInstance $instance -SqlCredential $SqlCredential -Credential $Credential

                if ($filestreamstate -ne $level -and -not $Force) {
                    Write-Message -Level Warning -Message "[$instance] $result"
                }
            }
        }
    }
}

tools\dbatools\functions\Disable-DbaForceNetworkEncryption.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#

function Disable-DbaForceNetworkEncryption {
    <#
    .SYNOPSIS
        Disables Force Encryption for a SQL Server instance

    .DESCRIPTION
        Disables Force Encryption for a SQL Server instance. Note that this requires access to the Windows Server, not the SQL instance itself.

        This setting is found in Configuration Manager.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. Defaults to localhost.

    .PARAMETER Credential
        Allows you to login to the computer (not SQL Server instance) using alternative Windows credentials.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Certificate
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Disable-DbaForceNetworkEncryption

        Disables Force Encryption on the default (MSSQLSERVER) instance on localhost - requires (and checks for) RunAs admin.

    .EXAMPLE
        PS C:\> Disable-DbaForceNetworkEncryption -SqlInstance sql01\SQL2008R2SP2

        Disables Force Network Encryption for the SQL2008R2SP2 on sql01. Uses Windows Credentials to both login and modify the registry.

    .EXAMPLE
        PS C:\> Disable-DbaForceNetworkEncryption -SqlInstance sql01\SQL2008R2SP2 -WhatIf

        Shows what would happen if the command were executed.

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "Low")]
    param (
        [Parameter(ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "ComputerName")]
        [DbaInstanceParameter[]]$SqlInstance = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [Alias('Silent')]
        [switch]$EnableException
    )
    process {

        foreach ($instance in $sqlinstance) {
            Write-Message -Level VeryVerbose -Message "Processing $instance." -Target $instance
            $null = Test-ElevationRequirement -ComputerName $instance -Continue

            Write-Message -Level Verbose -Message "Resolving hostname."
            $resolved = $null
            $resolved = Resolve-DbaNetworkName -ComputerName $instance -Turbo

            if ($null -eq $resolved) {
                Stop-Function -Message "Can't resolve $instance." -Target $instance -Continue -Category InvalidArgument
            }

            try {
                $sqlwmi = Invoke-ManagedComputerCommand -ComputerName $resolved.FullComputerName -ScriptBlock { $wmi.Services } -Credential $Credential -ErrorAction Stop | Where-Object DisplayName -eq "SQL Server ($($instance.InstanceName))"
            } catch {
                Stop-Function -Message "Failed to access $instance." -Target $instance -Continue -ErrorRecord $_
            }

            $regroot = ($sqlwmi.AdvancedProperties | Where-Object Name -eq REGROOT).Value
            $vsname = ($sqlwmi.AdvancedProperties | Where-Object Name -eq VSNAME).Value
            try {
                $instancename = $sqlwmi.DisplayName.Replace('SQL Server (', '').Replace(')', '') # Don't clown, I don't know regex :(
            } catch {
                # Probably because the instance name has been aliased or does not exist or something
                # here to avoid an empty catch
                $null = 1
            }
            $serviceaccount = $sqlwmi.ServiceAccount

            if ([System.String]::IsNullOrEmpty($regroot)) {
                $regroot = $sqlwmi.AdvancedProperties | Where-Object { $_ -match 'REGROOT' }
                $vsname = $sqlwmi.AdvancedProperties | Where-Object { $_ -match 'VSNAME' }

                if (![System.String]::IsNullOrEmpty($regroot)) {
                    $regroot = ($regroot -Split 'Value\=')[1]
                    $vsname = ($vsname -Split 'Value\=')[1]
                } else {
                    Stop-Function -Message "Can't find instance $vsname on $instance." -Continue -Category ObjectNotFound -Target $instance
                }
            }

            if ([System.String]::IsNullOrEmpty($vsname)) { $vsname = $instance }

            Write-Message -Level Output -Message "Regroot: $regroot" -Target $instance
            Write-Message -Level Output -Message "ServiceAcct: $serviceaccount" -Target $instance
            Write-Message -Level Output -Message "InstanceName: $instancename" -Target $instance
            Write-Message -Level Output -Message "VSNAME: $vsname" -Target $instance

            $scriptblock = {
                $regpath = "Registry::HKEY_LOCAL_MACHINE\$($args[0])\MSSQLServer\SuperSocketNetLib"
                $cert = (Get-ItemProperty -Path $regpath -Name Certificate).Certificate
                #Variable marked as unused by PSScriptAnalyzer
                #$oldvalue = (Get-ItemProperty -Path $regpath -Name ForceEncryption).ForceEncryption
                Set-ItemProperty -Path $regpath -Name ForceEncryption -Value $false
                $forceencryption = (Get-ItemProperty -Path $regpath -Name ForceEncryption).ForceEncryption

                [pscustomobject]@{
                    ComputerName          = $env:COMPUTERNAME
                    InstanceName          = $args[2]
                    SqlInstance           = $args[1]
                    ForceEncryption       = ($forceencryption -eq $true)
                    CertificateThumbprint = $cert
                }
            }

            if ($PScmdlet.ShouldProcess("local", "Connecting to $instance to modify the ForceEncryption value in $regroot for $($instance.InstanceName)")) {
                try {
                    Invoke-Command2 -ComputerName $resolved.FullComputerName -Credential $Credential -ArgumentList $regroot, $vsname, $instancename -ScriptBlock $scriptblock -ErrorAction Stop
                    Write-Message -Level Critical -Message "Force encryption was successfully set on $($resolved.FullComputerName) for the $instancename instance. You must now restart the SQL Server for changes to take effect." -Target $instance
                } catch {
                    Stop-Function -Message "Failed to connect to $($resolved.FullComputerName) using PowerShell remoting!" -ErrorRecord $_ -Target $instance -Continue
                }
            }
        }
    }
}

tools\dbatools\functions\Disable-DbaTraceFlag.ps1

function Disable-DbaTraceFlag {
    <#
    .SYNOPSIS
        Disable a Global Trace Flag that is currently running

    .DESCRIPTION
        The function will disable a Trace Flag that is currently running globally on the SQL Server instance(s) listed

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER TraceFlag
        Trace flag number to enable globally

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: TraceFlag
        Author: Garry Bargsley (@gbargsley), http://blog.garrybargsley.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Disable-DbaTraceFlag

    .EXAMPLE
        PS C:\> Disable-DbaTraceFlag -SqlInstance sql2016 -TraceFlag 3226

        Disable the globally running trace flag 3226 on SQL Server instance sql2016

    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "SqlServers")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [parameter(Mandatory)]
        [int[]]$TraceFlag,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $current = Get-DbaTraceFlag -SqlInstance $server -EnableException

            foreach ($tf in $TraceFlag) {
                $TraceFlagInfo = [pscustomobject]@{
                    SourceServer = $server.ComputerName
                    InstanceName = $server.ServiceName
                    SqlInstance  = $server.DomainInstanceName
                    TraceFlag    = $tf
                    Status       = $null
                    Notes        = $null
                    DateTime     = [DbaDateTime](Get-Date)
                }
                if ($tf -notin $current.TraceFlag) {
                    $TraceFlagInfo.Status = 'Skipped'
                    $TraceFlagInfo.Notes = "Trace Flag is not running."
                    $TraceFlagInfo
                    Write-Message -Level Warning -Message "Trace Flag $tf is not currently running on $instance"
                    continue
                }

                try {
                    $query = "DBCC TRACEOFF ($tf, -1)"
                    $server.Query($query)
                } catch {
                    $TraceFlagInfo.Status = "Failed"
                    $TraceFlagInfo.Notes = $_.Exception.Message
                    $TraceFlagInfo
                    Stop-Function -Message "Failure" -ErrorRecord $_ -Target $server -Continue
                }
                $TraceFlagInfo.Status = "Successful"
                $TraceFlagInfo
            }
        }
    }
}

tools\dbatools\functions\Dismount-DbaDatabase.ps1

function Dismount-DbaDatabase {
    <#
    .SYNOPSIS
        Detach a SQL Server Database.

    .DESCRIPTION
        This command detaches one or more SQL Server databases. If necessary, -Force can be used to break mirrors and remove databases from availability groups prior to detaching.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The database(s) to detach.

    .PARAMETER FileStructure
        A StringCollection object value that contains a list database files. If FileStructure is not specified, BackupHistory will be used to guess the structure.

    .PARAMETER InputObject
        A collection of databases (such as returned by Get-DbaDatabase), to be detached.

    .PARAMETER UpdateStatistics
        If this switch is enabled, statistics for the database will be updated prior to detaching it.

    .PARAMETER Force
        If this switch is enabled and the database is part of a mirror, the mirror will be broken. If the database is part of an Availability Group, it will be removed from the AG.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Database
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Dismount-DbaDatabase

    .EXAMPLE
        PS C:\> Detach-DbaDatabase -SqlInstance sql2016b -Database SharePoint_Config, WSS_Logging

        Detaches SharePoint_Config and WSS_Logging from sql2016b

    .EXAMPLE
        PS C:\> Get-DbaDatabase -SqlInstance sql2016b -Database 'PerformancePoint Service Application_10032db0fa0041df8f913f558a5dc0d4' | Detach-DbaDatabase -Force

        Detaches 'PerformancePoint Service Application_10032db0fa0041df8f913f558a5dc0d4' from sql2016b. Since Force was specified, if the database is part of mirror, the mirror will be broken prior to detaching.

        If the database is part of an Availability Group, it will first be dropped prior to detachment.

    .EXAMPLE
        PS C:\> Get-DbaDatabase -SqlInstance sql2016b -Database WSS_Logging | Detach-DbaDatabase -Force -WhatIf

        Shows what would happen if the command were to execute (without actually executing the detach/break/remove commands).

    #>
    [CmdletBinding(SupportsShouldProcess, DefaultParameterSetName = "Default")]
    param (
        [parameter(Mandatory, ParameterSetName = 'SqlInstance')]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [parameter(Mandatory, ParameterSetName = 'SqlInstance')]
        [string[]]$Database,
        [parameter(Mandatory, ParameterSetName = 'Pipeline', ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Database[]]$InputObject,
        [Switch]$UpdateStatistics,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            if ($Database) {
                $InputObject += $server.Databases | Where-Object Name -in $Database
            } else {
                $InputObject += $server.Databases
            }

            if ($ExcludeDatabase) {
                $InputObject = $InputObject | Where-Object Name -NotIn $ExcludeDatabase
            }
        }

        foreach ($db in $InputObject) {
            $db.Refresh()
            $server = $db.Parent

            if ($db.IsSystemObject) {
                Stop-Function -Message "$db is a system database and cannot be detached using this method." -Target $db -Continue
            }

            Write-Message -Level Verbose -Message "Checking replication status."
            if ($db.ReplicationOptions -ne "None") {
                Stop-Function -Message "Skipping $db  on $server because it is replicated." -Target $db -Continue
            }

            # repeat because different servers could be piped in
            $snapshots = (Get-DbaDbSnapshot -SqlInstance $server).SnapshotOf
            Write-Message -Level Verbose -Message "Checking for snaps"
            if ($db.Name -in $snapshots) {
                Write-Message -Level Warning -Message "Database $db has snapshots, you need to drop them before detaching. Skipping $db on $server."
                Continue
            }

            Write-Message -Level Verbose -Message "Checking mirror status"
            if ($db.IsMirroringEnabled -and !$Force) {
                Stop-Function -Message "$db on $server is being mirrored. Use -Force to break mirror or use the safer backup/restore method." -Target $db -Continue
            }

            Write-Message -Level Verbose -Message "Checking Availability Group status"

            if ($db.AvailabilityGroupName -and !$Force) {
                $ag = $db.AvailabilityGroupName
                Stop-Function -Message "$db on $server is part of an Availability Group ($ag). Use -Force to drop from $ag availability group to detach. Alternatively, you can use the safer backup/restore method." -Target $db -Continue
            }

            $sessions = Get-DbaProcess -SqlInstance $db.Parent -Database $db.Name

            if ($sessions -and !$Force) {
                Stop-Function -Message "$db on $server currently has connected users and cannot be dropped. Use -Force to kill all connections and detach the database." -Target $db -Continue
            }

            if ($force) {

                if ($sessions) {
                    If ($Pscmdlet.ShouldProcess($server, "Killing $($sessions.count) sessions which are connected to $db")) {
                        $null = $sessions | Stop-DbaProcess -ErrorAction SilentlyContinue -WarningAction SilentlyContinue
                    }
                }

                if ($db.IsMirroringEnabled) {
                    If ($Pscmdlet.ShouldProcess($server, "Breaking mirror for $db on $server")) {
                        try {
                            Write-Message -Level Warning -Message "Breaking mirror for $db on $server."
                            $db.ChangeMirroringState([Microsoft.SqlServer.Management.Smo.MirroringOption]::Off)
                            $db.Alter()
                            $db.Refresh()
                        } catch {
                            Stop-Function -Message "Could not break mirror for $db on $server - not detaching." -Target $db -ErrorRecord $_ -Continue
                        }
                    }
                }

                if ($db.AvailabilityGroupName) {
                    $ag = $db.AvailabilityGroupName
                    If ($Pscmdlet.ShouldProcess($server, "Attempting remove $db on $server from Availability Group $ag")) {
                        try {
                            $server.AvailabilityGroups[$ag].AvailabilityDatabases[$db.name].Drop()
                            Write-Message -Level Verbose -Message "Successfully removed $db from  detach from $ag on $server."
                        } catch {
                            if ($_.Exception.InnerException) {
                                $exception = $_.Exception.InnerException.ToString() -Split "System.Data.SqlClient.SqlException: "
                                $exception = " | $(($exception[1] -Split "at Microsoft.SqlServer.Management.Common.ConnectionManager")[0])".TrimEnd()
                            }

                            Stop-Function -Message "Could not remove $db from $ag on $server $exception." -Target $db -ErrorRecord $_ -Continue
                        }
                    }
                }

                $sessions = Get-DbaProcess -SqlInstance $db.Parent -Database $db.Name

                if ($sessions) {
                    If ($Pscmdlet.ShouldProcess($server, "Killing $($sessions.count) sessions which are still connected to $db")) {
                        $null = $sessions | Stop-DbaProcess -ErrorAction SilentlyContinue -WarningAction SilentlyContinue
                    }
                }
            }

            If ($Pscmdlet.ShouldProcess($server, "Detaching $db on $server")) {
                try {
                    $server.DetachDatabase($db.Name, $UpdateStatistics)

                    [pscustomobject]@{
                        ComputerName = $server.ComputerName
                        InstanceName = $server.ServiceName
                        SqlInstance  = $server.DomainInstanceName
                        Database     = $db.name
                        DetachResult = "Success"
                    }
                } catch {
                    Stop-Function -Message "Failure" -Target $db -ErrorRecord $_ -Continue
                }
            }
        }
    }
}

tools\dbatools\functions\Enable-DbaAgHadr.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Enable-DbaAgHadr {
    <#
    .SYNOPSIS
        Enables the Hadr service setting on the specified SQL Server.

    .DESCRIPTION
        In order to build an AG a cluster has to be built and then the Hadr enabled for the SQL Server
        service. This function enables that feature for the SQL Server service.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER Credential
        Credential object used to connect to the Windows server as a different user

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER Force
        Will restart SQL Server and SQL Server Agent service to apply the change.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Hadr, HA, AG, AvailabilityGroup
        Author: Shawn Melton (@wsmelton), http://wsmelton.github.io

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Enable-DbaAgHadr

    .EXAMPLE
        PS C:\> Enable-DbaAgHadr -SqlInstance sql2016

        Sets Hadr service to enabled for the instance sql2016 but changes will not be applied until the next time the server restarts.

    .EXAMPLE
        PS C:\> Enable-DbaAgHadr -SqlInstance sql2016 -Force

        Sets Hadr service to enabled for the instance sql2016, and restart the service to apply the change.

    .EXAMPLE
        PS C:\> Enable-DbaAgHadr -SqlInstance sql2012\dev1 -Force

        Sets Hadr service to disabled for the instance dev1 on sq2012, and restart the service to apply the change.

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "High")]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$Credential,
        [switch]$Force,
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            $computer = $computerFullName = $instance.ComputerName
            $instanceName = $instance.InstanceName
            if (-not (Test-ElevationRequirement -ComputerName $instance)) {
                return
            }
            $noChange = $false

            <#
            #Variable marked as unused by PSScriptAnalyzer
            switch ($instance.InstanceName) {
                'MSSQLSERVER' { $agentName = 'SQLSERVERAGENT' }
                default { $agentName = "SQLAgent`$$instanceName" }
            }
            #>

            try {
                Write-Message -Level Verbose -Message "Checking current Hadr setting for $computer"
                $currentState = Get-WmiHadr -SqlInstance $instance -Credential $Credential
            } catch {
                Stop-Function -Message "Failure to pull current state of Hadr setting on $computer" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }
            $isHadrEnabled = $currentState.IsHadrEnabled
            Write-Message -Level InternalComment -Message "$instance Hadr current value: $isHadrEnabled"

            # hadr results from sql wmi can be iffy, skip the check
            <#
            if ($isHadrEnabled) {
                Write-Message -Level Warning -Message "Hadr is already enabled for instance: $($instance.FullName)"
                $noChange = $true
                continue
            }
            #>

            $scriptblock = {
                $instance = $args[0]
                $sqlService = $wmi.Services | Where-Object DisplayName -eq "SQL Server ($instance)"
                $sqlService.ChangeHadrServiceSetting(1)
            }

            if ($noChange -eq $false) {
                if ($PSCmdlet.ShouldProcess($instance, "Changing Hadr from $isHadrEnabled to 1 for $instance")) {
                    try {
                        Invoke-ManagedComputerCommand -ComputerName $computerFullName -Credential $Credential -ScriptBlock $scriptblock -ArgumentList $instancename
                    } catch {
                        Stop-Function -Continue -Message "Failure on $($instance.FullName) | This may be because AlwaysOn Availability Groups feature requires the x86(non-WOW) or x64 Enterprise Edition of SQL Server 2012 (or later version) running on Windows Server 2008 (or later version) with WSFC hotfix KB 2494036 installed."
                    }
                }
            }

            if (Test-Bound -ParameterName Force) {
                if ($PSCmdlet.ShouldProcess($instance, "Force provided, restarting Engine and Agent service for $instance on $computerFullName")) {
                    try {
                        $null = Stop-DbaService -ComputerName $computerFullName -InstanceName $instanceName -Type Agent, Engine
                        $null = Start-DbaService -ComputerName $computerFullName -InstanceName $instanceName -Type Agent, Engine
                    } catch {
                        Stop-Function -Message "Issue restarting $instance" -Target $instance -Continue
                    }
                }
            }
            $newState = Get-WmiHadr -SqlInstance $instance -Credential $Credential

            if (Test-Bound -Not -ParameterName Force) {
                Write-Message -Level Warning -Message "You must restart the SQL Server for it to take effect."
            }

            [PSCustomObject]@{
                ComputerName  = $newState.ComputerName
                InstanceName  = $newState.InstanceName
                SqlInstance   = $newState.SqlInstance
                IsHadrEnabled = $true
            }
        }
    }
}

tools\dbatools\functions\Enable-DbaFilestream.ps1

#ValidationTags#CodeStyle,Messaging,FlowControl,Pipeline#
function Enable-DbaFilestream {
    <#
    .SYNOPSIS
        Enables FileStream on specified SQL Server instances

    .DESCRIPTION
        Connects to the specified SQL Server instances, and Enables the FileStream feature to the required value

        To perform the action, the SQL Server instance must be restarted. By default we will prompt for confirmation for this action, this can be overridden with the -Force switch

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. Defaults to localhost.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Credential
        Login to the target server using alternative credentials.

    .PARAMETER FileStreamLevel
        The level to of FileStream to be enabled:
        1 or TSql - T-Sql Access Only
        2 or TSqlIoStreaming - T-Sql and Win32 access enabled
        3 or TSqlIoStreamingRemoteClient T-Sql, Win32 and Remote access enabled

    .PARAMETER ShareName
        Specifies the Windows file share name to be used for storing the FILESTREAM data.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER Force
        Restart SQL Instance after changes. Use this parameter with care as it overrides whatif.

    .PARAMETER WhatIf
        Shows what would happen if the command runs. The command is not run unless Force is specified.

    .PARAMETER Confirm
        Prompts you for confirmation before running the command.

    .NOTES
        Tags: Filestream
        Author: Stuart Moore ( @napalmgram ) | Chrissy LeMaire ( @cl )
        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Enable-DbaFilestream -SqlInstance server1\instance2 -FileStreamLevel TSql
        PS C:\> Enable-DbaFilestream -SqlInstance server1\instance2 -FileStreamLevel 1

        These commands are functionally equivalent, both will set Filestream level on server1\instance2 to T-Sql Only

    .EXAMPLE
        PS C:\> Get-DbaFilestream -SqlInstance server1\instance2, server5\instance5, prod\hr | Where-Object InstanceAccessLevel -eq 0 | Enable-DbaFilestream -FileStreamLevel TSqlIoStreamingRemoteClient -Force

        Using this pipeline you can scan a range of SQL instances and enable filestream on only those on which it's disabled.

       #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "Medium")]
    param (
        [Parameter(Mandatory, ValueFromPipelineByPropertyName)]
        [DbaInstance[]]$SqlInstance,
        [Parameter(ValueFromPipelineByPropertyName)]
        [PSCredential]$SqlCredential,
        [Parameter(ValueFromPipelineByPropertyName)]
        [PSCredential]$Credential,
        [ValidateSet("TSql", "TSqlIoStreaming", "TSqlIoStreamingRemoteClient", 1, 2, 3)]
        [string]$FileStreamLevel = 1,
        [string]$ShareName,
        [switch]$Force,
        [switch]$EnableException
    )
    begin {
        if ($FileStreamLevel -notin (1, 2, 3)) {
            $FileStreamLevel = switch ($FileStreamLevel) {
                "TSql" {
                    1
                }
                "TSqlIoStreaming" {
                    2
                }
                "TSqlIoStreamingRemoteClient" {
                    3
                }
            }
        }
        # = $finallevel removed as it was identified as a unused variable
        $level = [int]$FileStreamLevel
        $OutputLookup = @{
            0 = 'Disabled'
            1 = 'FileStream enabled for T-Sql access'
            2 = 'FileStream enabled for T-Sql and IO streaming access'
            3 = 'FileStream enabled for T-Sql, IO streaming, and remote clients'
        }
    }
    process {
        if ($ShareName -and $level -lt 2) {
            Stop-Function -Message "Filestream must be at least level 2 when using ShareName"
            return
        }

        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure connecting to $computer" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $filestreamstate = [int]$server.Configuration.FilestreamAccessLevel.ConfigValue

            if ($Force -or $PSCmdlet.ShouldProcess($instance, "Changing from '$($OutputLookup[$filestreamstate])' to '$($OutputLookup[$level])' at the instance level")) {
                # Server level
                if ($server.IsClustered) {
                    $nodes = Get-DbaWsfcNode -ComputerName $instance
                    foreach ($node in $nodes.Name) {
                        $result = Set-FileSystemSetting -Instance $node -Credential $Credential -ShareName $ShareName -FilestreamLevel $level
                    }
                } else {
                    $result = Set-FileSystemSetting -Instance $instance -Credential $Credential -ShareName $ShareName -FilestreamLevel $level
                }

                # Instance level
                if ($level -eq 3) {
                    $level = 2
                }

                try {
                    $null = Set-DbaSpConfigure -SqlInstance $server -Name FilestreamAccessLevel -Value $level -EnableException
                } catch {
                    Stop-Function -Message "Failure" -ErrorRecord $_ -Continue
                }

                if ($Force) {
                    #$restart replaced with $null as it was identified as a unused variable
                    $null = Restart-DbaService -ComputerName $server.ComputerName -InstanceName $server.ServiceName -Type Engine -Force
                }

                Get-DbaFilestream -SqlInstance $instance -SqlCredential $SqlCredential -Credential $Credential
                if ($filestreamstate -ne $level -and -not $Force) {
                    Write-Message -Level Warning -Message "[$instance] $result"
                }
            }
        }
    }
}

tools\dbatools\functions\Enable-DbaForceNetworkEncryption.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Enable-DbaForceNetworkEncryption {
    <#
    .SYNOPSIS
        Enables Force Encryption for a SQL Server instance.

    .DESCRIPTION
        Enables Force Encryption for a SQL Server instance. Note that this requires access to the Windows Server, not the SQL instance itself.

        This setting is found in Configuration Manager.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER Credential
        Allows you to login to the computer (not SQL Server instance) using alternative Windows credentials

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Certificate, Encryption
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Enable-DbaForceNetworkEncryption

        Enables Force Encryption on the default (MSSQLSERVER) instance on localhost. Requires (and checks for) RunAs admin.

    .EXAMPLE
        PS C:\> Enable-DbaForceNetworkEncryption -SqlInstance sql01\SQL2008R2SP2

        Enables Force Network Encryption for the SQL2008R2SP2 on sql01. Uses Windows Credentials to both connect and modify the registry.

    .EXAMPLE
        PS C:\> Enable-DbaForceNetworkEncryption -SqlInstance sql01\SQL2008R2SP2 -WhatIf

        Shows what would happen if the command were executed.

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "Low", DefaultParameterSetName = 'Default')]
    param (
        [Parameter(ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "ComputerName")]
        [DbaInstanceParameter[]]
        $SqlInstance = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [Alias('Silent')]
        [switch]$EnableException
    )
    process {

        foreach ($instance in $sqlinstance) {
            Write-Message -Level VeryVerbose -Message "Processing $instance." -Target $instance
            $null = Test-ElevationRequirement -ComputerName $instance -Continue

            Write-Message -Level Verbose -Message "Resolving hostname."
            $resolved = $null
            $resolved = Resolve-DbaNetworkName -ComputerName $instance -Turbo

            if ($null -eq $resolved) {
                Stop-Function -Message "Can't resolve $instance." -Target $instance -Continue -Category InvalidArgument
            }

            try {
                $sqlwmi = Invoke-ManagedComputerCommand -ComputerName $resolved.FullComputerName -ScriptBlock { $wmi.Services } -Credential $Credential -ErrorAction Stop | Where-Object DisplayName -eq "SQL Server ($($instance.InstanceName))"
            } catch {
                Stop-Function -Message "Failed to access $instance" -Target $instance -Continue -ErrorRecord $_
            }

            $regroot = ($sqlwmi.AdvancedProperties | Where-Object Name -eq REGROOT).Value
            $vsname = ($sqlwmi.AdvancedProperties | Where-Object Name -eq VSNAME).Value
            try {
                $instancename = $sqlwmi.DisplayName.Replace('SQL Server (', '').Replace(')', '') # Don't clown, I don't know regex :(
            } catch {
                # Probably because the instance name has been aliased or does not exist or something
                # here to avoid an empty catch
                $null = 1
            }
            $serviceaccount = $sqlwmi.ServiceAccount

            if ([System.String]::IsNullOrEmpty($regroot)) {
                $regroot = $sqlwmi.AdvancedProperties | Where-Object { $_ -match 'REGROOT' }
                $vsname = $sqlwmi.AdvancedProperties | Where-Object { $_ -match 'VSNAME' }

                if (![System.String]::IsNullOrEmpty($regroot)) {
                    $regroot = ($regroot -Split 'Value\=')[1]
                    $vsname = ($vsname -Split 'Value\=')[1]
                } else {
                    Stop-Function -Message "Can't find instance $vsname on $instance." -Continue -Category ObjectNotFound -Target $instance
                }
            }

            if ([System.String]::IsNullOrEmpty($vsname)) { $vsname = $instance }

            Write-Message -Level Output -Message "Regroot: $regroot" -Target $instance
            Write-Message -Level Output -Message "ServiceAcct: $serviceaccount" -Target $instance
            Write-Message -Level Output -Message "InstanceName: $instancename" -Target $instance
            Write-Message -Level Output -Message "VSNAME: $vsname" -Target $instance

            $scriptblock = {
                $regpath = "Registry::HKEY_LOCAL_MACHINE\$($args[0])\MSSQLServer\SuperSocketNetLib"
                $cert = (Get-ItemProperty -Path $regpath -Name Certificate).Certificate
                #Variable marked as unused by PSScriptAnalyzer
                #$oldvalue = (Get-ItemProperty -Path $regpath -Name ForceEncryption).ForceEncryption
                Set-ItemProperty -Path $regpath -Name ForceEncryption -Value $true
                $forceencryption = (Get-ItemProperty -Path $regpath -Name ForceEncryption).ForceEncryption

                [pscustomobject]@{
                    ComputerName          = $env:COMPUTERNAME
                    InstanceName          = $args[2]
                    SqlInstance           = $args[1]
                    ForceEncryption       = ($forceencryption -eq $true)
                    CertificateThumbprint = $cert
                }
            }

            if ($PScmdlet.ShouldProcess("local", "Connecting to $instance to modify the ForceEncryption value in $regroot for $($instance.InstanceName)")) {
                try {
                    Invoke-Command2 -ComputerName $resolved.FullComputerName -Credential $Credential -ArgumentList $regroot, $vsname, $instancename -ScriptBlock $scriptblock -ErrorAction Stop | Select-Object -Property * -ExcludeProperty PSComputerName, RunspaceId, PSShowComputerName
                    Write-Message -Level Critical -Message "Force encryption was successfully set on $($resolved.FullComputerName) for the $instancename instance. You must now restart the SQL Server for changes to take effect." -Target $instance
                } catch {
                    Stop-Function -Message "Failed to connect to $($resolved.FullComputerName) using PowerShell remoting!" -ErrorRecord $_ -Target $instance -Continue
                }
            }
        }
    }
}

tools\dbatools\functions\Enable-DbaTraceFlag.ps1

function Enable-DbaTraceFlag {
    <#
    .SYNOPSIS
        Enable Global Trace Flag(s)

    .DESCRIPTION
        The function will set one or multiple trace flags on the SQL Server instance(s) listed

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER TraceFlag
        Trace flag number(s) to enable globally

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: TraceFlag
        Author: Garry Bargsley (@gbargsley), http://blog.garrybargsley.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Enable-DbaTraceFlag

    .EXAMPLE
        PS C:\> Enable-DbaTraceFlag -SqlInstance sql2016 -TraceFlag 3226

        Enable the trace flag 3226 on SQL Server instance sql2016

    .EXAMPLE
        PS C:\> Enable-DbaTraceFlag -SqlInstance sql2016 -TraceFlag 1117, 1118

        Enable multiple trace flags on SQL Server instance sql2016

    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "SqlServers")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [parameter(Mandatory)]
        [int[]]$TraceFlag,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $CurrentRunningTraceFlags = Get-DbaTraceFlag -SqlInstance $server -EnableException

            # We could combine all trace flags but the granularity is worth it
            foreach ($tf in $TraceFlag) {
                $TraceFlagInfo = [PSCustomObject]@{
                    SourceServer = $server.ComputerName
                    InstanceName = $server.ServiceName
                    SqlInstance  = $server.DomainInstanceName
                    TraceFlag    = $tf
                    Status       = $null
                    Notes        = $null
                    DateTime     = [DbaDateTime](Get-Date)
                }
                if ($CurrentRunningTraceFlags.TraceFlag -contains $tf) {
                    $TraceFlagInfo.Status = 'Skipped'
                    $TraceFlagInfo.Notes = "The Trace flag is already running."
                    $TraceFlagInfo
                    Write-Message -Level Warning -Message "The Trace flag [$tf] is already running globally."
                    continue
                }

                try {
                    $query = "DBCC TRACEON ($tf, -1)"
                    $server.Query($query)
                    $server.Refresh()
                } catch {
                    $TraceFlagInfo.Status = "Failed"
                    $TraceFlagInfo.Notes = $_.Exception.Message
                    $TraceFlagInfo
                    Stop-Function -Message "Failure" -ErrorRecord $_ -Target $server -Continue
                }
                $TraceFlagInfo.Status = "Successful"
                $TraceFlagInfo
            }
        }
    }
}

tools\dbatools\functions\Expand-DbaDbLogFile.ps1

function Expand-DbaDbLogFile {
    <#
    .SYNOPSIS
        This command will help you to automatically grow your transaction log  file in a responsible way (preventing the generation of too many VLFs).

    .DESCRIPTION
        As you may already know, having a transaction log file with too many Virtual Log Files (VLFs) can hurt your database performance in many ways.

        Example:
        Too many VLFs can cause transaction log backups to slow down and can also slow down database recovery and, in extreme cases, even impact insert/update/delete performance.

        References:
        http://www.sqlskills.com/blogs/kimberly/transaction-log-vlfs-too-many-or-too-few/
        http://blogs.msdn.com/b/saponsqlserver/archive/2012/02/22/too-many-virtual-log-files-vlfs-can-cause-slow-database-recovery.aspx
        http://www.brentozar.com/blitz/high-virtual-log-file-vlf-count/

        In order to get rid of this fragmentation we need to grow the file taking the following into consideration:
        - How many VLFs are created when we perform a grow operation or when an auto-grow is invoked?

        Note: In SQL Server 2014 this algorithm has changed (http://www.sqlskills.com/blogs/paul/important-change-vlf-creation-algorithm-sql-server-2014/)

        Attention:
        We are growing in MB instead of GB because of known issue prior to SQL 2012:
        More detail here:
        http://www.sqlskills.com/BLOGS/PAUL/post/Bug-log-file-growth-broken-for-multiples-of-4GB.aspx
        and
        http://connect.microsoft.com/SqlInstance/feedback/details/481594/log-growth-not-working-properly-with-specific-growth-sizes-vlfs-also-not-created-appropriately
        or
        https://connect.microsoft.com/SqlInstance/feedback/details/357502/transaction-log-file-size-will-not-grow-exactly-4gb-when-filegrowth-4gb

        Understanding related problems:
        http://www.sqlskills.com/blogs/kimberly/transaction-log-vlfs-too-many-or-too-few/
        http://blogs.msdn.com/b/saponsqlserver/archive/2012/02/22/too-many-virtual-log-files-vlfs-can-cause-slow-database-recovery.aspx
        http://www.brentozar.com/blitz/high-virtual-log-file-vlf-count/

        Known bug before SQL Server 2012
        http://www.sqlskills.com/BLOGS/PAUL/post/Bug-log-file-growth-broken-for-multiples-of-4GB.aspx
        http://connect.microsoft.com/SqlInstance/feedback/details/481594/log-growth-not-working-properly-with-specific-growth-sizes-vlfs-also-not-created-appropriately
        https://connect.microsoft.com/SqlInstance/feedback/details/357502/transaction-log-file-size-will-not-grow-exactly-4gb-when-filegrowth-4gb

        How it works?
        The transaction log will grow in chunks until it reaches the desired size.
        Example: If you have a log file with 8192MB and you say that the target size is 81920MB (80GB) it will grow in chunks of 8192MB until it reaches 81920MB. 8192 -> 16384 -> 24576 ... 73728 -> 81920

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER Database
        The database(s) to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER TargetLogSize
        Specifies the target size of the transaction log file in megabytes.

    .PARAMETER IncrementSize
        Specifies the amount the transaction log should grow in megabytes. If this value differs from the suggested value based on your TargetLogSize, you will be prompted to confirm your choice.

        This value will be calculated if not specified.

    .PARAMETER LogFileId
        Specifies the file number(s) of additional transaction log files to grow.

        If this value is not specified, only the first transaction log file will be processed.

    .PARAMETER ShrinkLogFile
        If this switch is enabled, your transaction log files will be shrunk.

    .PARAMETER ShrinkSize
        Specifies the target size of the transaction log file for the shrink operation in megabytes.

    .PARAMETER BackupDirectory
        Specifies the location of your backups. Backups must be performed to shrink the transaction log.

        If this value is not specified, the SQL Server instance's default backup directory will be used.

    .PARAMETER ExcludeDiskSpaceValidation
        If this switch is enabled, the validation for enough disk space using Get-DbaDiskSpace command will be skipped.
        This can be useful when you know that you have enough space to grow your TLog but you don't have PowerShell Remoting enabled to validate it.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER ExcludeDatabase
        The database(s) to exclude. Options for this list are auto-populated from the server.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Storage, Backup
        Author: Claudio Silva (@ClaudioESSilva)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        Requires: ALTER DATABASE permission
        Limitations: Freespace cannot be validated on the directory where the log file resides in SQL Server 2005.
        This script uses Get-DbaDiskSpace dbatools command to get the TLog's drive free space

    .LINK
        https://dbatools.io/Expand-DbaDbLogFile

    .EXAMPLE
        PS C:\> Expand-DbaDbLogFile -SqlInstance sqlcluster -Database db1 -TargetLogSize 50000

        Grows the transaction log for database db1 on sqlcluster to 50000 MB and calculates the increment size.

    .EXAMPLE
        PS C:\> Expand-DbaDbLogFile -SqlInstance sqlcluster -Database db1, db2 -TargetLogSize 10000 -IncrementSize 200

        Grows the transaction logs for databases db1 and db2 on sqlcluster to 1000MB and sets the growth increment to 200MB.

    .EXAMPLE
        PS C:\> Expand-DbaDbLogFile -SqlInstance sqlcluster -Database db1 -TargetLogSize 10000 -LogFileId 9

        Grows the transaction log file  with FileId 9 of the db1 database on sqlcluster instance to 10000MB.

    .EXAMPLE
        PS C:\> Expand-DbaDbLogFile -SqlInstance sqlcluster -Database (Get-Content D:\DBs.txt) -TargetLogSize 50000

        Grows the transaction log of the databases specified in the file 'D:\DBs.txt' on sqlcluster instance to 50000MB.

    .EXAMPLE
        PS C:\> Expand-DbaDbLogFile -SqlInstance SqlInstance -Database db1,db2 -TargetLogSize 100 -IncrementSize 10 -ShrinkLogFile -ShrinkSize 10 -BackupDirectory R:\MSSQL\Backup

        Grows the transaction logs for databases db1 and db2 on SQL server SQLInstance to 100MB, sets the incremental growth to 10MB, shrinks the transaction log to 10MB and uses the directory R:\MSSQL\Backup for the required backups.

       #>
    [CmdletBinding(SupportsShouldProcess, DefaultParameterSetName = 'Default')]
    param (
        [parameter(Position = 1, Mandatory)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter]$SqlInstance,
        [parameter(Position = 3)]
        [PSCredential]$SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [parameter(Position = 4)]
        [object[]]$ExcludeDatabase,
        [parameter(Position = 5, Mandatory)]
        [Alias('TargetLogSizeMB')]
        [int]$TargetLogSize,
        [parameter(Position = 6)]
        [Alias('IncrementSizeMB')]
        [int]$IncrementSize = -1,
        [parameter(Position = 7)]
        [int]$LogFileId = -1,
        [parameter(Position = 8, ParameterSetName = 'Shrink', Mandatory)]
        [switch]$ShrinkLogFile,
        [parameter(Position = 9, ParameterSetName = 'Shrink', Mandatory)]
        [Alias('ShrinkSizeMB')]
        [int]$ShrinkSize,
        [parameter(Position = 10, ParameterSetName = 'Shrink')]
        [AllowEmptyString()]
        [string]$BackupDirectory,
        [switch]$ExcludeDiskSpaceValidation,
        [switch][Alias('Silent')]
        $EnableException
    )

    begin {
        Write-Message -Level Verbose -Message "Set ErrorActionPreference to Inquire."
        $ErrorActionPreference = 'Inquire'

        #Convert MB to KB (SMO works in KB)
        Write-Message -Level Verbose -Message "Convert variables MB to KB (SMO works in KB)."
        [int]$TargetLogSizeKB = $TargetLogSize * 1024
        [int]$LogIncrementSize = $IncrementSize * 1024
        [int]$ShrinkSizeKB = $ShrinkSize * 1024
        [int]$SuggestLogIncrementSize = 0
        [bool]$LogByFileID = if ($LogFileId -eq -1) {
            $false
        } else {
            $true
        }

        #Set base information
        Write-Message -Level Verbose -Message "Initialize the instance '$SqlInstance'."

        $server = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential

        if ($ShrinkLogFile -eq $true) {
            if ($BackupDirectory.length -eq 0) {
                $backupdirectory = $server.Settings.BackupDirectory
            }

            $pathexists = Test-DbaPath -SqlInstance $server -Path $backupdirectory

            if ($pathexists -eq $false) {
                Stop-Function -Message "Backup directory does not exist."
            }
        }
    }

    process {

        try {

            [datetime]$initialTime = Get-Date

            #control the iteration number
            $databaseProgressbar = 0;

            Write-Message -Level Verbose -Message "Resolving NetBIOS name."
            $sourcenetbios = Resolve-NetBiosName $server

            $databases = $server.Databases | Where-Object IsAccessible
            Write-Message -Level Verbose -Message "Number of databases found: $($databases.Count)."
            if ($Database) {
                $databases = $databases | Where-Object Name -In $Database
            }
            if ($ExcludeDatabase) {
                $databases = $databases | Where-Object Name -NotIn $ExcludeDatabase
            }

            #go through all databases
            Write-Message -Level Verbose -Message "Processing...foreach database..."
            foreach ($db in $databases.Name) {
                Write-Message -Level Verbose -Message "Working on $db."
                $databaseProgressbar += 1

                #set step to reutilize on logging operations
                [string]$step = "$databaseProgressbar/$($Databases.Count)"

                if ($server.Databases[$db]) {
                    Write-Progress `
                        -Id 1 `
                        -Activity "Using database: $db on Instance: '$SqlInstance'" `
                        -PercentComplete ($databaseProgressbar / $Databases.Count * 100) `
                        -Status "Processing - $databaseProgressbar of $($Databases.Count)"

                    #Validate which file will grow
                    if ($LogByFileID) {
                        $logfile = $server.Databases[$db].LogFiles.ItemById($LogFileId)
                    } else {
                        $logfile = $server.Databases[$db].LogFiles[0]
                    }

                    $numLogfiles = $server.Databases[$db].LogFiles.Count

                    Write-Message -Level Verbose -Message "$step - Use log file: $logfile."
                    $currentSize = $logfile.Size
                    $currentSizeMB = $currentSize / 1024

                    #Get the number of VLFs
                    $initialVLFCount = Test-DbaDbVirtualLogFile -SqlInstance $server -Database $db

                    Write-Message -Level Verbose -Message "$step - Log file current size: $([System.Math]::Round($($currentSize/1024.0), 2)) MB "
                    [long]$requiredSpace = ($TargetLogSizeKB - $currentSize)

                    if ($ExcludeDiskSpaceValidation -eq $false) {
                        Write-Message -Level Verbose -Message "Verifying if sufficient space exists ($([System.Math]::Round($($requiredSpace / 1024.0), 2))MB) on the volume to perform this task."

                        [long]$TotalTLogFreeDiskSpaceKB = 0
                        Write-Message -Level Verbose -Message "Get TLog drive free space"

                        try {
                            [object]$AllDrivesFreeDiskSpace = Get-DbaDiskSpace -ComputerName $sourcenetbios | Select-Object Name, SizeInKB

                            #Verify path using Split-Path on $logfile.FileName in backwards. This way we will catch the LUNs. Example: "K:\Log01" as LUN name. Need to add final backslash if not there
                            $DrivePath = Split-Path $logfile.FileName -parent
                            $DrivePath = if (!($DrivePath.EndsWith("\"))) { "$DrivePath\" }
                            else { $DrivePath }
                            Do {
                                if ($AllDrivesFreeDiskSpace | Where-Object { $DrivePath -eq "$($_.Name)" }) {
                                    $TotalTLogFreeDiskSpaceKB = ($AllDrivesFreeDiskSpace | Where-Object { $DrivePath -eq $_.Name }).SizeInKB
                                    $match = $true
                                    break
                                } else {
                                    $match = $false
                                    $DrivePath = Split-Path $DrivePath -parent
                                    $DrivePath = if (!($DrivePath.EndsWith("\"))) { "$DrivePath\" }
                                    else { $DrivePath }
                                }

                            }
                            while (!$match -or ([string]::IsNullOrEmpty($DrivePath)))

                            Write-Message -Level Verbose -Message "Total TLog Free Disk Space in MB: $([System.Math]::Round($($TotalTLogFreeDiskSpaceKB / 1024.0), 2))"

                        } catch {
                            #Could not validate the disk space. Will ask if we want to continue.
                            $TotalTLogFreeDiskSpaceKB = 0
                        }

                        if (($TotalTLogFreeDiskSpaceKB -le 0) -or ([string]::IsNullOrEmpty($TotalTLogFreeDiskSpaceKB))) {
                            $title = "Choose increment value for database '$db':"
                            $message = "Cannot validate freespace on drive where the log file resides. Do you wish to continue? (Y/N)"
                            $yes = New-Object System.Management.Automation.Host.ChoiceDescription "&Yes", "Will continue"
                            $no = New-Object System.Management.Automation.Host.ChoiceDescription "&No", "Will exit"
                            $options = [System.Management.Automation.Host.ChoiceDescription[]]($yes, $no)
                            $result = $host.ui.PromptForChoice($title, $message, $options, 0)
                            #no
                            if ($result -eq 1) {
                                Write-Message -Level Warning -Message "You have cancelled the execution"
                                return
                            }
                        } elseif ($requiredSpace -gt $TotalTLogFreeDiskSpaceKB) {
                            Write-Message -Level Verbose -Message "There is not enough space on volume to perform this task. `r`n" `
                                "Available space: $([System.Math]::Round($($TotalTLogFreeDiskSpaceKB / 1024.0), 2))MB;`r`n" `
                                "Required space: $([System.Math]::Round($($requiredSpace / 1024.0), 2))MB;"
                            return
                        }
                    }

                    if ($currentSize -ige $TargetLogSizeKB -and ($ShrinkLogFile -eq $false)) {
                        Write-Message -Level Verbose -Message "$step - [INFO] The T-Log file '$logfile' size is already equal or greater than target size - No action required."
                    } else {
                        Write-Message -Level Verbose -Message "$step - [OK] There is sufficient free space to perform this task."

                        # If SQL Server version is greater or equal to 2012
                        if ($server.Version.Major -ge "11") {
                            switch ($TargetLogSize) {
                                { $_ -le 64 } { $SuggestLogIncrementSize = 64 }
                                { $_ -ge 64 -and $_ -lt 256 } { $SuggestLogIncrementSize = 256 }
                                { $_ -ge 256 -and $_ -lt 1024 } { $SuggestLogIncrementSize = 512 }
                                { $_ -ge 1024 -and $_ -lt 4096 } { $SuggestLogIncrementSize = 1024 }
                                { $_ -ge 4096 -and $_ -lt 8192 } { $SuggestLogIncrementSize = 2048 }
                                { $_ -ge 8192 -and $_ -lt 16384 } { $SuggestLogIncrementSize = 4096 }
                                { $_ -ge 16384 } { $SuggestLogIncrementSize = 8192 }
                            }
                        }
                        # 2008 R2 or under
                        else {
                            switch ($TargetLogSize) {
                                { $_ -le 64 } { $SuggestLogIncrementSize = 64 }
                                { $_ -ge 64 -and $_ -lt 256 } { $SuggestLogIncrementSize = 256 }
                                { $_ -ge 256 -and $_ -lt 1024 } { $SuggestLogIncrementSize = 512 }
                                { $_ -ge 1024 -and $_ -lt 4096 } { $SuggestLogIncrementSize = 1024 }
                                { $_ -ge 4096 -and $_ -lt 8192 } { $SuggestLogIncrementSize = 2048 }
                                { $_ -ge 8192 -and $_ -lt 16384 } { $SuggestLogIncrementSize = 4000 }
                                { $_ -ge 16384 } { $SuggestLogIncrementSize = 8000 }
                            }

                            if (($IncrementSize % 4096) -eq 0) {
                                Write-Message -Level Verbose -Message "Your instance version is below SQL 2012, remember the known BUG mentioned on HELP. `r`nUse Get-Help Expand-DbaTLogFileResponsibly to read help`r`nUse a different value for incremental size.`r`n"
                                return
                            }
                        }
                        Write-Message -Level Verbose -Message "Instance $server version: $($server.Version.Major) - Suggested TLog increment size: $($SuggestLogIncrementSize)MB"

                        # Shrink Log File to desired size before re-growth to desired size (You need to remove as many VLF's as possible to ensure proper growth)
                        $ShrinkSize = $ShrinkSizeKB / 1024
                        if ($ShrinkLogFile -eq $true) {
                            if ($server.Databases[$db].RecoveryModel -eq [Microsoft.SqlServer.Management.Smo.RecoveryModel]::Simple) {
                                Write-Message -Level Warning -Message "Database '$db' is in Simple RecoveryModel which does not allow log backups. Do not specify -ShrinkLogFile and -ShrinkSize parameters."
                                Continue
                            }

                            try {
                                $sql = "SELECT last_log_backup_lsn FROM sys.database_recovery_status WHERE database_id = DB_ID('$db')"
                                $sqlResult = $server.ConnectionContext.ExecuteWithResults($sql);

                                if ($sqlResult.Tables[0].Rows[0]["last_log_backup_lsn"] -is [System.DBNull]) {
                                    Write-Message -Level Warning -Message "First, you need to make a full backup before you can do Tlog backup on database '$db' (last_log_backup_lsn is null)."
                                    Continue
                                }
                            } catch {
                                Stop-Function -Message "Can't execute SQL on $server. `r`n $($_)" -Continue
                            }

                            If ($Pscmdlet.ShouldProcess($($server.name), "Backing up TLog for $db")) {
                                Write-Message -Level Verbose -Message "We are about to backup the Tlog for database '$db' to '$backupdirectory' and shrink the log."
                                Write-Message -Level Verbose -Message "Starting Size = $currentSizeMB."

                                $DefaultCompression = $server.Configuration.DefaultBackupCompression.ConfigValue

                                if ($currentSizeMB -gt $ShrinkSize) {
                                    $backupRetries = 1
                                    Do {
                                        try {
                                            $percent = $null
                                            $backup = New-Object Microsoft.SqlServer.Management.Smo.Backup
                                            $backup.Action = [Microsoft.SqlServer.Management.Smo.BackupActionType]::Log
                                            $backup.BackupSetDescription = "Transaction Log backup of " + $db
                                            $backup.BackupSetName = $db + " Backup"
                                            $backup.Database = $db
                                            $backup.MediaDescription = "Disk"
                                            $dt = get-date -format yyyyMMddHHmmssms
                                            $null = $backup.Devices.AddDevice($backupdirectory + "\" + $db + "_db_" + $dt + ".trn", 'File')
                                            if ($DefaultCompression -eq $true) {
                                                $backup.CompressionOption = 1
                                            } else {
                                                $backup.CompressionOption = 0
                                            }
                                            $null = [Microsoft.SqlServer.Management.Smo.PercentCompleteEventHandler] {
                                                Write-Progress -id 2 -ParentId 1 -activity "Backing up $db to $server" -percentcomplete $_.Percent -status ([System.String]::Format("Progress: {0} %", $_.Percent))
                                            }
                                            $backup.add_PercentComplete($percent)
                                            $backup.PercentCompleteNotification = 10
                                            $backup.add_Complete($complete)
                                            Write-Progress -id 2 -ParentId 1 -activity "Backing up $db to $server" -percentcomplete 0 -Status ([System.String]::Format("Progress: {0} %", 0))
                                            $backup.SqlBackup($server)
                                            Write-Progress -id 2 -ParentId 1 -activity "Backing up $db to $server" -status "Complete" -Completed
                                            $logfile.Shrink($ShrinkSize, [Microsoft.SqlServer.Management.SMO.ShrinkMethod]::TruncateOnly)
                                            $logfile.Refresh()
                                        } catch {
                                            Write-Progress -id 1 -activity "Backup" -status "Failed" -completed
                                            Stop-Function -Message "Backup failed for database" -ErrorRecord $_ -Target $db -Continue
                                            Continue
                                        }

                                    }
                                    while (($logfile.Size / 1024) -gt $ShrinkSize -and ++$backupRetries -lt 6)

                                    $currentSize = $logfile.Size
                                    Write-Message -Level Verbose -Message "TLog backup and truncate for database '$db' finished. Current TLog size after $backupRetries backups is $($currentSize/1024)MB"
                                }
                            }
                        }

                        # SMO uses values in KB
                        $SuggestLogIncrementSize = $SuggestLogIncrementSize * 1024

                        # If default, use $SuggestedLogIncrementSize
                        if ($IncrementSize -eq -1) {
                            $LogIncrementSize = $SuggestLogIncrementSize
                        } else {
                            $title = "Choose increment value for database '$db':"
                            $message = "The input value for increment size was $([System.Math]::Round($LogIncrementSize/1024, 0))MB. However the suggested value for increment is $($SuggestLogIncrementSize/1024)MB.`r`nDo you want to use the suggested value of $([System.Math]::Round($SuggestLogIncrementSize/1024, 0))MB insted of $([System.Math]::Round($LogIncrementSize/1024, 0))MB"
                            $yes = New-Object System.Management.Automation.Host.ChoiceDescription "&Yes", "Uses recomended size."
                            $no = New-Object System.Management.Automation.Host.ChoiceDescription "&No", "Will use parameter value."
                            $options = [System.Management.Automation.Host.ChoiceDescription[]]($yes, $no)
                            $result = $host.ui.PromptForChoice($title, $message, $options, 0)
                            #yes
                            if ($result -eq 0) {
                                $LogIncrementSize = $SuggestLogIncrementSize
                            }
                        }

                        #start growing file
                        If ($Pscmdlet.ShouldProcess($($server.name), "Starting log growth. Increment chunk size: $($LogIncrementSize/1024)MB for database '$db'")) {
                            Write-Message -Level Verbose -Message "Starting log growth. Increment chunk size: $($LogIncrementSize/1024)MB for database '$db'"

                            Write-Message -Level Verbose -Message "$step - While current size less than target log size."

                            while ($currentSize -lt $TargetLogSizeKB) {

                                Write-Progress `
                                    -Id 2 `
                                    -ParentId 1 `
                                    -Activity "Growing file $logfile on '$db' database" `
                                    -PercentComplete ($currentSize / $TargetLogSizeKB * 100) `
                                    -Status "Remaining - $([System.Math]::Round($($($TargetLogSizeKB - $currentSize) / 1024.0), 2)) MB"

                                Write-Message -Level Verbose -Message "$step - Verifying if the log can grow or if it's already at the desired size."
                                if (($TargetLogSizeKB - $currentSize) -lt $LogIncrementSize) {
                                    Write-Message -Level Verbose -Message "$step - Log size is lower than the increment size. Setting current size equals $TargetLogSizeKB."
                                    $currentSize = $TargetLogSizeKB
                                } else {
                                    Write-Message -Level Verbose -Message "$step - Grow the $logfile file in $([System.Math]::Round($($LogIncrementSize / 1024.0), 2)) MB"
                                    $currentSize += $LogIncrementSize
                                }

                                #When -WhatIf Switch, do not run
                                if ($PSCmdlet.ShouldProcess("$step - File will grow to $([System.Math]::Round($($currentSize/1024.0), 2)) MB", "This action will grow the file $logfile on database $db to $([System.Math]::Round($($currentSize/1024.0), 2)) MB .`r`nDo you wish to continue?", "Perform grow")) {
                                    Write-Message -Level Verbose -Message "$step - Set size $logfile to $([System.Math]::Round($($currentSize/1024.0), 2)) MB"
                                    $logfile.size = $currentSize

                                    Write-Message -Level Verbose -Message "$step - Applying changes"
                                    $logfile.Alter()
                                    Write-Message -Level Verbose -Message "$step - Changes have been applied"

                                    #Will put the info like VolumeFreeSpace up to date
                                    $logfile.Refresh()
                                }
                            }

                            Write-Message -Level Verbose -Message "`r`n$step - [OK] Growth process for logfile '$logfile' on database '$db', has been finished."

                            Write-Message -Level Verbose -Message "$step - Grow $logfile log file on $db database finished."
                        }
                    }
                }
                #else verifying existence
                else {
                    Write-Message -Level Verbose -Message "Database '$db' does not exist on instance '$SqlInstance'."
                }

                #Get the number of VLFs
                $currentVLFCount = Test-DbaDbVirtualLogFile -SqlInstance $server -Database $db

                [pscustomobject]@{
                    ComputerName    = $server.ComputerName
                    InstanceName    = $server.ServiceName
                    SqlInstance     = $server.DomainInstanceName
                    Database        = $db
                    ID              = $logfile.ID
                    Name            = $logfile.Name
                    LogFileCount    = $numLogfiles
                    InitialSize     = [dbasize]($currentSizeMB * 1024 * 1024)
                    CurrentSize     = [dbasize]($TargetLogSize * 1024 * 1024)
                    InitialVLFCount = $initialVLFCount.Total
                    CurrentVLFCount = $currentVLFCount.Total
                } | Select-DefaultView -ExcludeProperty LogFileCount
            } #foreach database
        } catch {
            Stop-Function -Message "Logfile $logfile on database $db not processed. Error: $($_.Exception.Message). Line Number:  $($_InvocationInfo.ScriptLineNumber)" -Continue
        }
    }

    end {
        Write-Message -Level Verbose -Message "Process finished $((Get-Date) - ($initialTime))"
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias Expand-SqlTLogResponsibly
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Parameter TargetLogSizeMB
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Parameter IncrementSizeMB
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Parameter ShrinkSizeMB
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias Expand-DbaTLogResponsibly
    }
}

tools\dbatools\functions\Export-DbaAvailabilityGroup.ps1

#ValidationTags#Messaging#
function Export-DbaAvailabilityGroup {
    <#
    .SYNOPSIS
        Exports SQL Server Availability Groups to a T-SQL file.

    .DESCRIPTION
        Exports SQL Server Availability Groups creation scripts to a T-SQL file. This is a function that is not available in SSMS.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. SQL Server 2012 and above supported.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Path
        The directory name where the output files will be written. A sub directory with the format 'ServerName$InstanceName' will be created. A T-SQL scripts named 'AGName.sql' will be created under this subdirectory for each scripted Availability Group.

    .PARAMETER AvailabilityGroup
        The Availability Group(s) to export - this list is auto-populated from the server. If unspecified, all logins will be processed.

    .PARAMETER ExcludeAvailabilityGroup
        The Availability Group(s) to exclude - this list is auto-populated from the server.

    .PARAMETER NoClobber
        Do not overwrite existing export files.

    .PARAMETER WhatIf
        Shows you what it'd output if you were to run the command

    .PARAMETER Confirm
        Confirms each step/line of output

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Hadr, HA, AG, AvailabilityGroup
        Author: Chris Sommer (@cjsommer), cjsommer.com

        dbatools PowerShell module (https://dbatools.io)
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Export-DbaAvailabilityGroup

    .EXAMPLE
        PS C:\> Export-DbaAvailabilityGroup -SqlInstance sql2012

        Exports all Availability Groups from SQL server "sql2012". Output scripts are written to the Documents\SqlAgExports directory by default.

    .EXAMPLE
        PS C:\> Export-DbaAvailabilityGroup -SqlInstance sql2012 -Path C:\temp\availability_group_exports

        Exports all Availability Groups from SQL server "sql2012". Output scripts are written to the C:\temp\availability_group_exports directory.

    .EXAMPLE
        PS C:\> Export-DbaAvailabilityGroup -SqlInstance sql2012 -Path 'C:\dir with spaces\availability_group_exports' -AvailabilityGroup AG1,AG2

        Exports Availability Groups AG1 and AG2 from SQL server "sql2012". Output scripts are written to the C:\dir with spaces\availability_group_exports directory.

    .EXAMPLE
        PS C:\> Export-DbaAvailabilityGroup -SqlInstance sql2014 -Path C:\temp\availability_group_exports -NoClobber

        Exports all Availability Groups from SQL server "sql2014". Output scripts are written to the C:\temp\availability_group_exports directory. If the export file already exists it will not be overwritten.

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [object[]]$AvailabilityGroup,
        [object[]]$ExcludeAvailabilityGroup,
        [Alias("OutputLocation", "FilePath")]
        [string]$Path = "$([Environment]::GetFolderPath("MyDocuments"))\SqlAgExport",
        [switch]$NoClobber,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            if ($server.IsHadrEnabled -eq $false) {
                Stop-Function -Message "Hadr is not enabled on this instance" -Continue
            } else {
                # Get all of the Availability Groups and filter if required
                $ags = $server.AvailabilityGroups
            }

            if (Test-Bound 'AvailabilityGroup') {
                $ags = $ags | Where-Object Name -In $AvailabilityGroup
            }
            if (Test-Bound 'ExcludeAvailabilityGroup') {
                $ags = $ags | Where-Object Name -NotIn $ExcludeAvailabilityGroup
            }

            if ($ags) {

                # Set and create the OutputLocation if it doesn't exist
                $sqlinst = $instance.ToString().Replace('\', '$')
                $outputLocation = "$Path\$sqlinst"

                if (!(Test-Path $outputLocation -PathType Container)) {
                    $null = New-Item -Path $outputLocation -ItemType Directory -Force
                }

                # Script each Availability Group
                foreach ($ag in $ags) {
                    $agName = $ag.Name

                    # Set the outfile name
                    if ($AppendDateToOutputFilename.IsPresent) {
                        $formatteddate = (Get-Date -Format 'yyyyMMdd_hhmm')
                        $outFile = "$outputLocation\${AGname}_${formatteddate}.sql"
                    } else {
                        $outFile = "$outputLocation\$agName.sql"
                    }

                    # Check NoClobber and script out the AG
                    if ($NoClobber.IsPresent -and (Test-Path -Path $outFile -PathType Leaf)) {
                        Write-Message -Level Warning -Message "OutputFile $outFile already exists. Skipping due to -NoClobber parameter"
                    } else {
                        Write-Message -Level Verbose -Message "Scripting Availability Group [$agName] on $instance to $outFile"

                        # Create comment block header for AG script
                        "/*" | Out-File -FilePath $outFile -Encoding ASCII -Force
                        " * Created by dbatools 'Export-DbaAvailabilityGroup' cmdlet on '$(Get-Date)'" | Out-File -FilePath $outFile -Encoding ASCII -Append
                        " * See https://dbatools.io/Export-DbaAvailabilityGroup for more help" | Out-File -FilePath $outFile -Encoding ASCII -Append

                        # Output AG and listener names
                        " *" | Out-File -FilePath $outFile -Encoding ASCII -Append
                        " * Availability Group Name: $($ag.name)" | Out-File -FilePath $outFile -Encoding ASCII -Append
                        $ag.AvailabilityGroupListeners | ForEach-Object { " * Listener Name: $($_.name)" } | Out-File -FilePath $outFile -Encoding ASCII -Append

                        # Output all replicas
                        " *" | Out-File -FilePath $outFile -Encoding ASCII -Append
                        $ag.AvailabilityReplicas | ForEach-Object { " * Replica: $($_.name)" } | Out-File -FilePath $outFile -Encoding ASCII -Append

                        # Output all databases
                        " *" | Out-File -FilePath $outFile -Encoding ASCII -Append
                        $ag.AvailabilityDatabases | ForEach-Object { " * Database: $($_.name)" } | Out-File -FilePath $outFile -Encoding ASCII -Append

                        # $ag | Select-Object -Property * | Out-File -FilePath $outFile -Encoding ASCII -Append

                        "*/" | Out-File -FilePath $outFile -Encoding ASCII -Append

                        # Script the AG
                        try {
                            $ag.Script() | Out-File -FilePath $outFile -Encoding ASCII -Append
                            Get-ChildItem $outFile
                        } catch {
                            Stop-Function -ErrorRecord $_ -Message "Error scripting out the availability groups. This is likely due to a bug in SMO." -Continue
                        }
                    }
                }
            } else {
                Write-Message -Level Output -Message "No Availability Groups detected on $instance"
            }
        }
    }
}

tools\dbatools\functions\Export-DbaCmsRegServer.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Export-DbaCmsRegServer {
    <#
    .SYNOPSIS
        Exports registered servers and registered server groups to file

    .DESCRIPTION
        Exports registered servers and registered server groups to file

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER CredentialPersistenceType
        Used to specify how the login and passwords are persisted. Valid values include None, PersistLoginName and PersistLoginNameAndPassword.

    .PARAMETER Path
        The path to the exported file. If no path is specified, one will be created.

    .PARAMETER InputObject
        Enables piping from Get-DbaCmsRegServer, Get-DbaCmsRegServerGroup, CSVs and other objects.

        If importing from CSV or other object, a column named ServerName is required. Optional columns include Name, Description and Group.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.

        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.

        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: RegisteredServer, CMS
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Export-DbaCmsRegServer

    .EXAMPLE
        PS C:\> Export-DbaCmsRegServer -SqlInstance sql2008

        Exports all Registered Server and Registered Server Groups on sql2008 to an automatically generated file name in the current directory

    .EXAMPLE
        PS C:\> Get-DbaCmsRegServer -SqlInstance sql2008, sql2012 | Export-DbaCmsRegServer

        Exports all registered servers on sql2008 and sql2012. Warning - each one will have its own individual file. Consider piping groups.

    .EXAMPLE
        PS C:\> Get-DbaCmsRegServerGroup -SqlInstance sql2008, sql2012 | Export-DbaCmsRegServer

        Exports all registered servers on sql2008 and sql2012, organized by group.

    #>
    [CmdletBinding()]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSAvoidUsingPlainTextForPassword", "", Justification = "For Parameter CredentialPersistenceType")]
    param (
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [parameter(ValueFromPipeline)]
        [object[]]$InputObject,
        [string]$Path,
        [ValidateSet("None", "PersistLoginName", "PersistLoginNameAndPassword")]
        [string]$CredentialPersistenceType = "None",
        [switch]$EnableException
    )
    begin {
        if ((Test-Bound -ParameterName Path)) {
            if ($Path -notmatch '\\') {
                $Path = ".\$Path"
            }

            $directory = Split-Path $Path
            if (-not (Test-Path $directory)) {
                New-Item -Path $directory -ItemType Directory
            }
        } else {
            $timeNow = (Get-Date -uformat "%m%d%Y%H%M%S")
        }
    }
    process {
        foreach ($instance in $SqlInstance) {
            $InputObject += Get-DbaCmsRegServerGroup -SqlInstance $instance -SqlCredential $SqlCredential -Id 1
        }

        foreach ($object in $InputObject) {
            try {
                if ($object -is [Microsoft.SqlServer.Management.RegisteredServers.RegisteredServersStore]) {
                    $object = Get-DbaCmsRegServerGroup -SqlInstance $object.ServerConnection.SqlConnectionObject -Id 1
                }

                if ($object -is [Microsoft.SqlServer.Management.RegisteredServers.RegisteredServer]) {
                    if ((Test-Bound -ParameterName Path -Not)) {
                        $servername = $object.SqlInstance.Replace('\', '$')
                        $regservername = $object.Name.Replace('\', '$')
                        $Path = "$serverName-regserver-$regservername-$timeNow.xml"
                    }
                    $object.Export($Path, $CredentialPersistenceType)
                } elseif ($object -is [Microsoft.SqlServer.Management.RegisteredServers.ServerGroup]) {
                    if ((Test-Bound -ParameterName Path -Not)) {
                        $servername = $object.SqlInstance.Replace('\', '$')
                        $regservergroup = $object.Name.Replace('\', '$')
                        $Path = "$serverName-reggroup-$regservergroup-$timeNow.xml"
                    }
                    $object.Export($Path, $CredentialPersistenceType)
                } else {
                    Stop-Function -Message "InputObject is not a registered server or server group" -Continue
                }
                Get-ChildItem $Path -ErrorAction Stop
            } catch {
                Stop-Function -Message "Failure" -ErrorRecord $_
            }
        }
    }

    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias Export-DbaRegisteredServer
    }
}

tools\dbatools\functions\Export-DbaCredential.ps1

function Export-DbaCredential {
    <#
    .SYNOPSIS
        Exports credentials INCLUDING PASSWORDS, unless specified otherwise, to sql file.

    .DESCRIPTION
        Exports credentials INCLUDING PASSWORDS, unless specified otherwise, to sql file.

        Requires remote Windows access if exporting the password.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Credential
        Login to the target OS using alternative credentials. Accepts credential objects (Get-Credential)

    .PARAMETER Path
        The path to the exported sql file.

    .PARAMETER Identity
        The credentials to export. If unspecified, all credentials will be exported.

    .PARAMETER InputObject
        Allow credentials to be piped in from Get-DbaCredential

    .PARAMETER ExcludePassword
        Exports the SQL credential without any sensitive information.

    .PARAMETER InputObject
        Allow credentials to be piped in from Get-DbaCredential

    .PARAMETER Append
        Append to Path

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Credential
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Export-DbaCredential -SqlInstance sql2017 -Path C:\temp\cred.sql

        Exports credentials, including passwords, from sql2017 to the file C:\temp\cred.sql

    #>
    [CmdletBinding()]
    param (
        [Parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [string[]]$Identity,
        [PSCredential]$SqlCredential,
        [PSCredential]$Credential,
        [string]$Path,
        [switch]$ExcludePassword,
        [switch]$Append,
        [Microsoft.SqlServer.Management.Smo.Credential[]]$InputObject,
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential -MinimumVersion 9
                $InputObject += $server.Credentials
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            if ($Identity) {
                $InputObject = $InputObject | Where-Object Identity -in $Identity
            }

            if (!(Test-SqlSa -SqlInstance $instance -SqlCredential $sqlcredential)) {
                Stop-Function -Message "Not a sysadmin on $instance. Quitting." -Target $instance -Continue
            }

            Write-Message -Level Verbose -Message "Getting NetBios name for $instance."
            $sourceNetBios = Resolve-NetBiosName $server

            Write-Message -Level Verbose -Message "Checking if Remote Registry is enabled on $instance."
            try {
                Invoke-Command2 -Raw -Credential $Credential -ComputerName $sourceNetBios -ScriptBlock { Get-ItemProperty -Path "HKLM:\SOFTWARE\" } -ErrorAction Stop
            } catch {
                Stop-Function -Message "Can't connect to registry on $instance." -Target $sourceNetBios -ErrorRecord $_
                return
            }

            if (-not (Test-Bound -ParameterName Path)) {
                $timenow = (Get-Date -uformat "%m%d%Y%H%M%S")
                $mydocs = [Environment]::GetFolderPath('MyDocuments')
                $path = "$mydocs\$($server.name.replace('\', '$'))-$timenow-credential.sql"
            }

            $sql = @()

            if ($ExcludePassword) {
                Stop-Function -Message "So sorry, there's no other way around it for now. The password has to be exported in plain text."
                return
            } else {
                try {
                    $creds = Get-DecryptedObject -SqlInstance $server -Type Credential
                } catch {
                    Stop-Function -Continue -Message "Failure" -ErrorRecord $_
                }
                foreach ($currentCred in $creds) {
                    $name = $currentCred.Name.Replace("'", "''")
                    $identity = $currentCred.Identity.Replace("'", "''")
                    $password = $currentCred.Password.Replace("'", "''")
                    $sql += "CREATE CREDENTIAL $name WITH IDENTITY = N'$identity', SECRET = N'$password'"
                }
            }

            try {
                if ($Append) {
                    Add-Content -Path $path -Value $sql
                } else {
                    Set-Content -Path $path -Value $sql
                }
                Get-ChildItem -Path $path
            } catch {
                Stop-Function -Message "Can't write to $path" -ErrorRecord $_ -Continue
            }


            Write-Message -Level Verbose -Message "Attempting to migrate $credentialName"
            Get-ChildItem -Path $path
        }
    }
}

tools\dbatools\functions\Export-DbaDacPackage.ps1

function Export-DbaDacPackage {
    <#
    .SYNOPSIS
        Exports a dacpac from a server.

    .DESCRIPTION
        Using SQLPackage, export a dacpac from an instance of SQL Server.

        Note - Extract from SQL Server is notoriously flaky - for example if you have three part references to external databases it will not work.

        For help with the extract action parameters and properties, refer to https://msdn.microsoft.com/en-us/library/hh550080(v=vs.103).aspx

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Allows you to login to servers using alternative logins instead Integrated, accepts Credential object created by Get-Credential

    .PARAMETER Path
        The directory where the .dacpac files will be exported to. Defaults to documents.

    .PARAMETER Database
        The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto-populated from the server

    .PARAMETER AllUserDatabases
        Run command against all user databases

    .PARAMETER Type
        Selecting the type of the export: Dacpac (default) or Bacpac.

    .PARAMETER Table
        List of the tables to include into the export. Should be provided as an array of strings: dbo.Table1, Table2, Schema1.Table3.

    .PARAMETER DacOption
        Export options for a corresponding export type. Can be created by New-DbaDacOption -Type Dacpac | Bacpac

    .PARAMETER ExtendedParameters
        Optional parameters used to extract the DACPAC. More information can be found at
        https://msdn.microsoft.com/en-us/library/hh550080.aspx

    .PARAMETER ExtendedProperties
        Optional properties used to extract the DACPAC. More information can be found at
        https://msdn.microsoft.com/en-us/library/hh550080.aspx

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Migration, Database, Dacpac
        Author: Richie lee (@richiebzzzt)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Export-DbaDacPackage

    .EXAMPLE
        PS C:\> Export-DbaDacPackage -SqlInstance sql2016 -Database SharePoint_Config

        Exports the dacpac for SharePoint_Config on sql2016 to $home\Documents\SharePoint_Config.dacpac

    .EXAMPLE
        PS C:\> $options = New-DbaDacOption -Type Dacpac -Action Export
        PS C:\> $options.ExtractAllTableData = $true
        PS C:\> $options.CommandTimeout = 0
        PS C:\> Export-DbaDacPackage -SqlInstance sql2016 -Database DB1 -Options $options

        Uses DacOption object to set the CommandTimeout to 0 then extracts the dacpac for DB1 on sql2016 to $home\Documents\DB1.dacpac including all table data.

    .EXAMPLE
        PS C:\> Export-DbaDacPackage -SqlInstance sql2016 -AllUserDatabases -ExcludeDatabase "DBMaintenance","DBMonitoring" C:\temp

        Exports dacpac packages for all USER databases, excluding "DBMaintenance" & "DBMonitoring", on sql2016 and saves them to C:\temp

    .EXAMPLE
        PS C:\> $moreparams = "/OverwriteFiles:$true /Quiet:$true"
        PS C:\> Export-DbaDacPackage -SqlInstance sql2016 -Database SharePoint_Config -Path C:\temp -ExtendedParameters $moreparams

        Using extended parameters to over-write the files and performs the extraction in quiet mode. Uses command line instead of SMO behind the scenes.
    #>
    [CmdletBinding(DefaultParameterSetName = 'SMO')]
    param
    (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstance[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [switch]$AllUserDatabases,
        [string]$Path = "$home\Documents",
        [parameter(ParameterSetName = 'SMO')]
        [Alias('ExtractOptions', 'ExportOptions', 'DacExtractOptions', 'DacExportOptions', 'Options', 'Option')]
        [object]$DacOption,
        [parameter(ParameterSetName = 'CMD')]
        [string]$ExtendedParameters,
        [parameter(ParameterSetName = 'CMD')]
        [string]$ExtendedProperties,
        [ValidateSet('Dacpac', 'Bacpac')]
        [string]$Type = 'Dacpac',
        [parameter(ParameterSetName = 'SMO')]
        [string[]]$Table,
        [switch]$EnableException
    )

    process {
        if ((Test-Bound -Not -ParameterName Database) -and (Test-Bound -Not -ParameterName ExcludeDatabase) -and (Test-Bound -Not -ParameterName AllUserDatabases)) {
            Stop-Function -Message "You must specify databases to execute against using either -Database, -ExcludeDatabase or -AllUserDatabases"
            return
        }

        if (-not (Test-Path $Path)) {
            Write-Message -Level Verbose "Assuming that $Path is a file path"
            $parentFolder = Split-Path $path -Parent
            if (-not (Test-Path $parentFolder)) {
                Stop-Function -Message "$parentFolder doesn't exist or access denied"
                return
            }
            $leaf = Split-Path $path -Leaf
            $fileName = Join-Path (Get-Item $parentFolder) $leaf
        } else {
            $fileItem = Get-Item $Path
            if ($fileItem -is [System.IO.DirectoryInfo]) {
                $parentFolder = $fileItem.FullName
            } elseif ($fileItem -is [System.IO.FileInfo]) {
                $fileName = $fileItem.FullName
            }
        }

        if (-not $script:core) {
            $dacfxPath = Resolve-Path -Path "$script:PSModuleRoot\bin\smo\Microsoft.SqlServer.Dac.dll"

            if ((Test-Path $dacfxPath) -eq $false) {
                Stop-Function -Message 'Dac Fx library not found.' -EnableException $EnableException
                return
            } else {
                try {
                    Add-Type -Path $dacfxPath
                    Write-Message -Level Verbose -Message "Dac Fx loaded."
                } catch {
                    Stop-Function -Message 'No usable version of Dac Fx found.' -ErrorRecord $_
                    return
                }
            }
        }

        #check that at least one of the DB selection parameters was specified
        if (!$AllUserDatabases -and !$Database) {
            Stop-Function -Message "Either -Database or -AllUserDatabases should be specified" -Continue
        }
        #Check Option object types - should have a specific type
        if ($Type -eq 'Dacpac') {
            if ($DacOption -and $DacOption -isnot [Microsoft.SqlServer.Dac.DacExtractOptions]) {
                Stop-Function -Message "Microsoft.SqlServer.Dac.DacExtractOptions object type is expected - got $($DacOption.GetType())."
                return
            }
        } elseif ($Type -eq 'Bacpac') {
            if ($DacOption -and $DacOption -isnot [Microsoft.SqlServer.Dac.DacExportOptions]) {
                Stop-Function -Message "Microsoft.SqlServer.Dac.DacExportOptions object type is expected - got $($DacOption.GetType())."
                return
            }
        }

        #Create a tuple to be used as a table filter
        if ($Table) {
            $tblList = New-Object 'System.Collections.Generic.List[Tuple[String, String]]'
            foreach ($tableItem in $Table) {
                $tableSplit = $tableItem.Split('.')
                if ($tableSplit.Count -gt 1) {
                    $tblName = $tableSplit[-1]
                    $schemaName = $tableSplit[-2]
                } else {
                    $tblName = [string]$tableSplit
                    $schemaName = 'dbo'
                }
                $tblList.Add((New-Object "tuple[String, String]" -ArgumentList $schemaName, $tblName))
            }
        } else {
            $tblList = $null
        }

        foreach ($instance in $sqlinstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }
            $cleaninstance = $instance.ToString().Replace('\', '-')
            if ($Database) {
                $dbs = Get-DbaDatabase -SqlInstance $server -OnlyAccessible -Database $Database -ExcludeDatabase $ExcludeDatabase
            } else {
                # all user databases by default
                $dbs = Get-DbaDatabase -SqlInstance $server -OnlyAccessible -ExcludeSystem -ExcludeDatabase $ExcludeDatabase
            }
            if (-not $dbs) {
                Stop-Function -Message "Databases not found on $instance" -Target $instance -Continue
            }

            foreach ($db in $dbs) {
                $resultstime = [diagnostics.stopwatch]::StartNew()
                $dbname = $db.name
                $connstring = $server.ConnectionContext.ConnectionString
                if ($connstring -notmatch 'Database=') {
                    $connstring = "$connstring;Database=$dbname"
                }
                if ($fileName) {
                    $currentFileName = $fileName
                } else {
                    if ($Type -eq 'Dacpac') { $ext = 'dacpac' }
                    elseif ($Type -eq 'Bacpac') { $ext = 'bacpac' }
                    $currentFileName = Join-Path $parentFolder "$cleaninstance-$dbname.$ext"
                }
                Write-Message -Level Verbose -Message "Using connection string $connstring"

                #using SMO by default
                if ($PsCmdlet.ParameterSetName -eq 'SMO') {
                    try {
                        $dacSvc = New-Object -TypeName Microsoft.SqlServer.Dac.DacServices -ArgumentList $connstring -ErrorAction Stop
                    } catch {
                        Stop-Function -Message "Could not connect to the connection string $connstring" -Target $instance -Continue
                    }
                    if (!$DacOption) {
                        $opts = New-DbaDacOption -Type $Type -Action Export
                    } else {
                        $opts = $DacOption
                    }

                    $null = $output = Register-ObjectEvent -InputObject $dacSvc -EventName "Message" -SourceIdentifier "msg" -Action { $EventArgs.Message.Message }

                    if ($Type -eq 'Dacpac') {
                        Write-Message -Level Verbose -Message "Initiating Dacpac extract to $currentFileName"
                        #not sure how to extract that info from the existing DAC application, leaving 1.0.0.0 for now
                        $version = New-Object System.Version -ArgumentList '1.0.0.0'
                        try {
                            $dacSvc.Extract($currentFileName, $dbname, $dbname, $version, $null, $tblList, $opts, $null)
                        } catch {
                            Stop-Function -Message "DacServices extraction failure" -ErrorRecord $_ -Continue
                        } finally {
                            Unregister-Event -SourceIdentifier "msg"
                        }
                    } elseif ($Type -eq 'Bacpac') {
                        Write-Message -Level Verbose -Message "Initiating Bacpac export to $currentFileName"
                        try {
                            $dacSvc.ExportBacpac($currentFileName, $dbname, $opts, $tblList, $null)
                        } catch {
                            Stop-Function -Message "DacServices export failure" -ErrorRecord $_ -Continue
                        } finally {
                            Unregister-Event -SourceIdentifier "msg"
                        }
                    }
                    $finalResult = ($output.output -join "`r`n" | Out-String).Trim()
                } elseif ($PsCmdlet.ParameterSetName -eq 'CMD') {
                    if ($Type -eq 'Dacpac') { $action = 'Extract' }
                    elseif ($Type -eq 'Bacpac') { $action = 'Export' }
                    $cmdConnString = $connstring.Replace('"', "'")

                    $sqlPackageArgs = "/action:$action /tf:""$currentFileName"" /SourceConnectionString:""$cmdConnString"" $ExtendedParameters $ExtendedProperties"

                    try {
                        $startprocess = New-Object System.Diagnostics.ProcessStartInfo
                        $startprocess.FileName = "$script:PSModuleRoot\bin\smo\sqlpackage.exe"
                        $startprocess.Arguments = $sqlPackageArgs
                        $startprocess.RedirectStandardError = $true
                        $startprocess.RedirectStandardOutput = $true
                        $startprocess.UseShellExecute = $false
                        $startprocess.CreateNoWindow = $true
                        $process = New-Object System.Diagnostics.Process
                        $process.StartInfo = $startprocess
                        $process.Start() | Out-Null
                        $stdout = $process.StandardOutput.ReadToEnd()
                        $stderr = $process.StandardError.ReadToEnd()
                        $process.WaitForExit()
                        Write-Message -level Verbose -Message "StandardOutput: $stdout"
                        $finalResult = $stdout
                    } catch {
                        Stop-Function -Message "SQLPackage Failure" -ErrorRecord $_ -Continue
                    }

                    if ($process.ExitCode -ne 0) {
                        Stop-Function -Message "Standard output - $stderr" -Continue
                    }
                }
                [pscustomobject]@{
                    ComputerName = $server.ComputerName
                    InstanceName = $server.ServiceName
                    SqlInstance  = $server.DomainInstanceName
                    Database     = $dbname
                    Path         = $currentFileName
                    Elapsed      = [prettytimespan]($resultstime.Elapsed)
                    Result       = $finalResult
                } | Select-DefaultView -ExcludeProperty ComputerName, InstanceName
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Export-DbaDacpac
    }
}

tools\dbatools\functions\Export-DbaDiagnosticQuery.ps1

function Export-DbaDiagnosticQuery {
    <#
    .SYNOPSIS
        Export-DbaDiagnosticQuery can convert output generated by Invoke-DbaDiagnosticQuery to CSV or Excel

    .DESCRIPTION
        The default output format of Invoke-DbaDiagnosticQuery is a custom object. It can also output to CSV and Excel.
        However, CSV output can generate a lot of files and Excel output depends on the ImportExcel module by Doug Finke (https://github.com/dfinke/ImportExcel)
        Export-DbaDiagnosticQuery can be used to convert from the default export type to the other available export types.

    .PARAMETER InputObject
        Specifies the objects to convert

    .PARAMETER ConvertTo
        Specifies the output type. Valid choices are Excel and CSV. CSV is the default.

    .PARAMETER Path
        Specifies the path to the output files.

    .PARAMETER Suffix
        Suffix for the filename. It's datetime by default.

    .PARAMETER NoPlanExport
        Use this switch to suppress exporting of .sqlplan files

    .PARAMETER NoQueryExport
        Use this switch to suppress exporting of .sql files

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Query
        Author: Andre Kamman (@AndreKamman), http://clouddba.io

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Export-DbaDiagnosticQuery

    .EXAMPLE
        PS C:\> Invoke-DbaDiagnosticQuery -SqlInstance sql2016 | Export-DbaDiagnosticQuery -Path c:\temp

        Converts output from Invoke-DbaDiagnosticQuery to multiple CSV files

    .EXAMPLE
        PS C:\> $output = Invoke-DbaDiagnosticQuery -SqlInstance sql2016
        PS C:\> Export-DbaDiagnosticQuery -InputObject $output -ConvertTo Excel

        Converts output from Invoke-DbaDiagnosticQuery to Excel worksheet(s) in the Documents folder

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [object[]]$InputObject,
        [ValidateSet("Excel", "Csv")]
        [string]$ConvertTo = "Csv",
        [System.IO.FileInfo]$Path = [Environment]::GetFolderPath("mydocuments"),
        [string]$Suffix = "$(Get-Date -format 'yyyyMMddHHmmssms')",
        [switch]$NoPlanExport,
        [switch]$NoQueryExport,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        if ($ConvertTo -eq "Excel") {
            try {
                Import-Module ImportExcel -ErrorAction Stop
            } catch {
                $message = "Failed to load module, exporting to Excel feature is not available
                            Install the module from: https://github.com/dfinke/ImportExcel
                            Valid alternative conversion format is csv"
                Stop-Function -Message $message
                return
            }
        }

        if (!$(Test-Path $Path)) {
            try {
                New-Item $Path -ItemType Directory -ErrorAction Stop | Out-Null
                Write-Message -Level Output -Message "Created directory $Path"
            } catch {
                Stop-Function -Message "Failed to create directory $Path" -Continue
            }
        }
    }

    process {
        if (Test-FunctionInterrupt) { return }

        foreach ($row in $InputObject) {
            $result = $row.Result
            $name = $row.Name
            $SqlInstance = $row.SqlInstance.Replace("\", "$")
            $dbname = $row.Database
            $number = $row.Number

            if ($null -eq $result) {
                Stop-Function -Message "Result was empty for $name" -Target $result -Continue
            }

            $queryname = Remove-InvalidFileNameChars -Name $Name
            $excelfilename = "$Path\$SqlInstance-DQ-$Suffix.xlsx"
            $exceldbfilename = "$Path\$SqlInstance-DQ-$dbname-$Suffix.xlsx"
            $csvdbfilename = "$Path\$SqlInstance-$dbname-DQ-$number-$queryname-$Suffix.csv"
            $csvfilename = "$Path\$SqlInstance-DQ-$number-$queryname-$Suffix.csv"

            $columnnameoptions = "Query Plan", "QueryPlan", "Query_Plan", "query_plan_xml"
            if (($result | Get-Member | Where-Object Name -in $columnnameoptions).Count -gt 0) {
                $plannr = 0
                $columnname = ($result | Get-Member | Where-Object Name -In $columnnameoptions).Name
                foreach ($plan in $result."$columnname") {
                    $plannr += 1
                    if ($row.DatabaseSpecific) {
                        $planfilename = "$Path\$SqlInstance-$dbname-DQ-$number-$queryname-$plannr-$Suffix.sqlplan"
                    } else {
                        $planfilename = "$Path\$SqlInstance-DQ-$number-$queryname-$plannr-$Suffix.sqlplan"
                    }

                    if (!$NoPlanExport) {
                        Write-Message -Level Output -Message "Exporting $planfilename"
                        if ($plan) {$plan | Out-File -FilePath $planfilename}
                    }
                }

                $result = $result | Select-Object * -ExcludeProperty "$columnname"
            }

            $columnnameoptions = "Complete Query Text", "QueryText", "Query Text", "Query_Text", "query_sql_text"
            if (($result | Get-Member | Where-Object Name -In $columnnameoptions ).Count -gt 0) {
                $sqlnr = 0
                $columnname = ($result | Get-Member | Where-Object Name -In $columnnameoptions).Name
                foreach ($sql in $result."$columnname") {
                    $sqlnr += 1
                    if ($row.DatabaseSpecific) {
                        $sqlfilename = "$Path\$SqlInstance-$dbname-DQ-$number-$queryname-$sqlnr-$Suffix.sql"
                    } else {
                        $sqlfilename = "$Path\$SqlInstance-DQ-$number-$queryname-$sqlnr-$Suffix.sql"
                    }

                    if (!$NoQueryExport) {
                        Write-Message -Level Output -Message "Exporting $sqlfilename"
                        if ($sql) {$sql | Out-File -FilePath $sqlfilename}
                    }
                }

                $result = $result | Select-Object * -ExcludeProperty "$columnname"
            }

            switch ($ConvertTo) {
                "Excel" {
                    if ($row.DatabaseSpecific) {
                        Write-Message -Level Output -Message "Exporting $exceldbfilename"
                        $result | Export-Excel -Path $exceldbfilename -WorkSheetname $Name -AutoSize -AutoFilter -BoldTopRow -FreezeTopRow
                    } else {
                        Write-Message -Level Output -Message "Exporting $excelfilename"
                        $result | Export-Excel -Path $excelfilename -WorkSheetname $Name -AutoSize -AutoFilter -BoldTopRow -FreezeTopRow
                    }
                }
                "csv" {
                    if ($row.DatabaseSpecific) {
                        Write-Message -Level Output -Message "Exporting $csvdbfilename"
                        $result | Export-Csv -Path $csvdbfilename -NoTypeInformation -Append
                    } else {
                        Write-Message -Level Output -Message "Exporting $csvfilename"
                        $result | Export-Csv -Path $csvfilename -NoTypeInformation -Append
                    }
                }
            }
        }
    }
}

tools\dbatools\functions\Export-DbaExecutionPlan.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Export-DbaExecutionPlan {
    <#
    .SYNOPSIS
        Exports execution plans to disk.

    .DESCRIPTION
        Exports execution plans to disk. Can pipe from Get-DbaExecutionPlan

        Thanks to
        https://www.simple-talk.com/sql/t-sql-programming/dmvs-for-query-plan-metadata/
        and
        http://www.scarydba.com/2017/02/13/export-plans-cache-sqlplan-file/
        for the idea and query.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Credential object used to connect to the SQL Server as a different user

    .PARAMETER Database
        The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto-populated from the server

    .PARAMETER SinceCreation
        Datetime object used to narrow the results to a date

    .PARAMETER SinceLastExecution
        Datetime object used to narrow the results to a date

    .PARAMETER Path
        The directory where all of the sqlxml files will be exported

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER PipedObject
        Internal parameter

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Performance, ExecutionPlan
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Export-DbaExecutionPlan

    .EXAMPLE
        PS C:\> Export-DbaExecutionPlan -SqlInstance sqlserver2014a -Path C:\Temp

        Exports all execution plans for sqlserver2014a. Files saved in to C:\Temp

    .EXAMPLE
        PS C:\> Export-DbaExecutionPlan -SqlInstance sqlserver2014a -Database db1, db2 -SinceLastExecution '2016-07-01 10:47:00' -Path C:\Temp

        Exports all execution plans for databases db1 and db2 on sqlserver2014a since July 1, 2016 at 10:47 AM. Files saved in to C:\Temp

    .EXAMPLE
        PS C:\> Get-DbaExecutionPlan -SqlInstance sqlserver2014a | Export-DbaExecutionPlan -Path C:\Temp

        Gets all execution plans for sqlserver2014a. Using Pipeline exports them all to C:\Temp

    .EXAMPLE
        PS C:\> Get-DbaExecutionPlan -SqlInstance sqlserver2014a | Export-DbaExecutionPlan -Path C:\Temp -WhatIf

        Gets all execution plans for sqlserver2014a. Then shows what would happen if the results where piped to Export-DbaExecutionPlan

    #>
    [cmdletbinding(SupportsShouldProcess, DefaultParameterSetName = "Default")]
    param (
        [parameter(ParameterSetName = 'NotPiped', Mandatory)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [parameter(ParameterSetName = 'NotPiped')]
        [PSCredential]$SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [parameter(ParameterSetName = 'Piped', Mandatory)]
        [parameter(ParameterSetName = 'NotPiped', Mandatory)]
        [string]$Path,
        [parameter(ParameterSetName = 'NotPiped')]
        [datetime]$SinceCreation,
        [parameter(ParameterSetName = 'NotPiped')]
        [datetime]$SinceLastExecution,
        [Parameter(ParameterSetName = 'Piped', Mandatory, ValueFromPipeline)]
        [object[]]$PipedObject,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {

        function Export-Plan {
            param(
                [object]$object
            )
            $instanceName = $object.SqlInstance
            $dbName = $object.DatabaseName
            $queryPosition = $object.QueryPosition
            $sqlHandle = "0x"; $object.SqlHandle | ForEach-Object { $sqlHandle += ("{0:X}" -f $_).PadLeft(2, "0") }
            $sqlHandle = $sqlHandle.TrimStart('0x02000000').TrimEnd('0000000000000000000000000000000000000000')
            $shortName = "$instanceName-$dbName-$queryPosition-$sqlHandle"

            foreach ($queryPlan in $object.BatchQueryPlanRaw) {
                $fileName = "$path\$shortName-batch.sqlplan"

                try {
                    if ($Pscmdlet.ShouldProcess("localhost", "Writing XML file to $fileName")) {
                        $queryPlan.Save($fileName)
                    }
                } catch {
                    Stop-Function -Message "Skipped query plan for $fileName because it is null." -Target $fileName -ErrorRecord $_ -Continue
                }
            }

            foreach ($statementPlan in $object.SingleStatementPlanRaw) {
                $fileName = "$path\$shortName.sqlplan"

                try {
                    if ($Pscmdlet.ShouldProcess("localhost", "Writing XML file to $fileName")) {
                        $statementPlan.Save($fileName)
                    }
                } catch {
                    Stop-Function -Message "Skipped statement plan for $fileName because it is null." -Target $fileName -ErrorRecord $_ -Continue
                }
            }

            if ($Pscmdlet.ShouldProcess("console", "Showing output object")) {
                Add-Member -Force -InputObject $object -MemberType NoteProperty -Name OutputFile -Value $fileName
                Select-DefaultView -InputObject $object -Property ComputerName, InstanceName, SqlInstance, DatabaseName, SqlHandle, CreationTime, LastExecutionTime, OutputFile
            }
        }
    }

    process {
        if (!(Test-Path $Path)) {
            $null = New-Item -ItemType Directory -Path $Path
        }

        if ($PipedObject) {
            foreach ($object in $pipedobject) {
                Export-Plan $object
                return
            }
        }

        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $select = "SELECT DB_NAME(deqp.dbid) as DatabaseName, OBJECT_NAME(deqp.objectid) as ObjectName,
                    detqp.query_plan AS SingleStatementPlan,
                    deqp.query_plan AS BatchQueryPlan,
                    ROW_NUMBER() OVER ( ORDER BY Statement_Start_offset ) AS QueryPosition,
                    sql_handle as SqlHandle,
                    plan_handle as PlanHandle,
                    creation_time as CreationTime,
                    last_execution_time as LastExecutionTime"

            $from = " FROM sys.dm_exec_query_stats deqs
                        CROSS APPLY sys.dm_exec_text_query_plan(deqs.plan_handle,
                            deqs.statement_start_offset,
                            deqs.statement_end_offset) AS detqp
                        CROSS APPLY sys.dm_exec_query_plan(deqs.plan_handle) AS deqp
                        CROSS APPLY sys.dm_exec_sql_text(deqs.plan_handle) AS execText"

            if ($ExcludeDatabase -or $Database -or $SinceCreation -or $SinceLastExecution -or $ExcludeEmptyQueryPlan -eq $true) {
                $where = " WHERE "
            }

            $whereArray = @()

            if ($Database -gt 0) {
                $dbList = $Database -join "','"
                $whereArray += " DB_NAME(deqp.dbid) in ('$dbList') "
            }

            if (Test-Bound 'SinceCreation') {
                Write-Message -Level Verbose -Message "Adding creation time"
                $whereArray += " creation_time >= '" + $SinceCreation.ToString("yyyy-MM-dd HH:mm:ss") + "' "
            }

            if (Test-Bound 'SinceLastExecution') {
                Write-Message -Level Verbose -Message "Adding last execution time"
                $whereArray += " last_execution_time >= '" + $SinceLastExecution.ToString("yyyy-MM-dd HH:mm:ss") + "' "
            }

            if (Test-Bound 'ExcludeDatabase') {
                $dbList = $ExcludeDatabase -join "','"
                $whereArray += " DB_NAME(deqp.dbid) not in ('$dbList') "
            }

            if (Test-Bound 'ExcludeEmptyQueryPlan') {
                $whereArray += " detqp.query_plan is not null"
            }

            if ($where.Length -gt 0) {
                $whereArray = $whereArray -join " and "
                $where = "$where $whereArray"
            }

            $sql = "$select $from $where"
            Write-Message -Level Debug -Message "SQL Statement: $sql"
            try {
                $dataTable = $server.ConnectionContext.ExecuteWithResults($sql).Tables
            } catch {
                Stop-Function -Message "Issue collecting execution plans" -Target $instance -ErroRecord $_ -Continue
            }

            foreach ($row in ($dataTable.Rows)) {
                $sqlHandle = "0x"; $row.sqlhandle | ForEach-Object { $sqlHandle += ("{0:X}" -f $_).PadLeft(2, "0") }
                $planhandle = "0x"; $row.planhandle | ForEach-Object { $planhandle += ("{0:X}" -f $_).PadLeft(2, "0") }

                $object = [pscustomobject]@{
                    ComputerName           = $server.ComputerName
                    InstanceName           = $server.ServiceName
                    SqlInstance            = $server.DomainInstanceName
                    DatabaseName           = $row.DatabaseName
                    SqlHandle              = $sqlHandle
                    PlanHandle             = $planhandle
                    SingleStatementPlan    = $row.SingleStatementPlan
                    BatchQueryPlan         = $row.BatchQueryPlan
                    QueryPosition          = $row.QueryPosition
                    CreationTime           = $row.CreationTime
                    LastExecutionTime      = $row.LastExecutionTime
                    BatchQueryPlanRaw      = [xml]$row.BatchQueryPlan
                    SingleStatementPlanRaw = [xml]$row.SingleStatementPlan
                }
                Export-Plan $object
            }
        }
    }
}

tools\dbatools\functions\Export-DbaInstance.ps1

function Export-DbaInstance {
    <#
    .SYNOPSIS
        Exports SQL Server *ALL* database restore scripts, logins, database mail profiles/accounts, credentials, SQL Agent objects, linked servers,
        Central Management Server objects, server configuration settings (sp_configure), user objects in systems databases,
        system triggers and backup devices from one SQL Server to another.

        For more granular control, please use one of the -Exclude parameters and use the other functions available within the dbatools module.

    .DESCRIPTION
        Export-DbaInstance consolidates most of the export scripts in dbatools into one command.

        This is useful when you're looking to Export entire instances. It less flexible than using the underlying functions.
        Think of it as an easy button. Unless an -Exclude is specified, it exports:

        All database restore scripts.
        All logins.
        All database mail objects.
        All credentials.
        All objects within the Job Server (SQL Agent).
        All linked servers.
        All groups and servers within Central Management Server.
        All SQL Server configuration objects (everything in sp_configure).
        All user objects in system databases.
        All system triggers.
        All system backup devices.
        All Audits.
        All Endpoints.
        All Extended Events.
        All Policy Management objects.
        All Resource Governor objects.
        All Server Audit Specifications.
        All Custom Errors (User Defined Messages).
        All Server Roles.
        All Availability Groups.

    .PARAMETER SqlInstance
        The target SQL Server instances

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Credential
        Alternative Windows credentials for exporting Linked Servers and Credentials. Accepts credential objects (Get-Credential)

    .PARAMETER Path
        The path to the export file

    .PARAMETER SharedPath
        Specifies the network location for the backup files. The SQL Server service accounts on both Source and Destination must have read/write permission to access this location.

    .PARAMETER WithReplace
        If this switch is used, databases are restored from backup using WITH REPLACE. This is useful if you want to stage some complex file paths.

    .PARAMETER NoRecovery
        If this switch is used, databases will be left in the No Recovery state to enable further backups to be added.

    .PARAMETER IncludeDbMasterKey
        Exports the db master key then logs into the server to copy it to the $Path

    .PARAMETER Exclude
        Exclude one or more objects to export

        Databases
        Logins
        AgentServer
        Credentials
        LinkedServers
        SpConfigure
        CentralManagementServer
        DatabaseMail
        SysDbUserObjects
        SystemTriggers
        BackupDevices
        Audits
        Endpoints
        ExtendedEvents
        PolicyManagement
        ResourceGovernor
        ServerAuditSpecifications
        CustomErrors
        ServerRoles
        AvailabilityGroups
        ReplicationSettings

    .PARAMETER BatchSeparator
        Batch separator for scripting output. "GO" by default.

    .PARAMETER ScriptingOption
        Add scripting options to scripting output for all objects except Registered Servers and Extended Events.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Export
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Export-DbaInstance

    .EXAMPLE
        PS C:\> Export-DbaInstance -SqlInstance sqlserver\instance

        All databases, logins, job objects and sp_configure options will be exported from
        sqlserver\instance to an automatically generated folder name in Documents.

    .EXAMPLE
        PS C:\> Export-DbaInstance -SqlInstance sqlcluster -Exclude Databases, Logins -Path C:\dr\sqlcluster

        Exports everything but logins and database restore scripts to C:\dr\sqlcluster

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [PSCredential]$Credential,
        [string]$Path,
        [switch]$NoRecovery,
        [switch]$IncludeDbMasterKey,
        [ValidateSet('Databases', 'Logins', 'AgentServer', 'Credentials', 'LinkedServers', 'SpConfigure', 'CentralManagementServer', 'DatabaseMail', 'SysDbUserObjects', 'SystemTriggers', 'BackupDevices', 'Audits', 'Endpoints', 'ExtendedEvents', 'PolicyManagement', 'ResourceGovernor', 'ServerAuditSpecifications', 'CustomErrors', 'ServerRoles', 'AvailabilityGroups', 'ReplicationSettings')]
        [string[]]$Exclude,
        [string]$BatchSeparator = 'GO',
        [Microsoft.SqlServer.Management.Smo.ScriptingOptions]$ScriptingOption,
        [switch]$EnableException
    )
    begin {
        if ((Test-Bound -ParameterName Path)) {
            if (-not ((Get-Item $Path -ErrorAction Ignore) -is [System.IO.DirectoryInfo])) {
                Stop-Function -Message "Path must be a directory"
            }
        }

        if (-not $ScriptingOption) {
            $ScriptingOption = New-DbaScriptingOption
        }

        $elapsed = [System.Diagnostics.Stopwatch]::StartNew()
        $started = Get-Date

        $ScriptingOptions = New-Object Microsoft.SqlServer.Management.Smo.ScriptingOptions
        $ScriptingOptions.ScriptBatchTerminator = $true

    }
    process {
        if (Test-FunctionInterrupt) { return }
        foreach ($instance in $SqlInstance) {
            $stepCounter = $filecounter = 0
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential -MinimumVersion 10
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            if (-not (Test-Bound -ParameterName Path)) {
                $timenow = (Get-Date -uformat "%m%d%Y%H%M%S")
                $mydocs = [Environment]::GetFolderPath('MyDocuments')
                $path = "$mydocs\$($server.name.replace('\', '$'))-$timenow"
            }

            if (-not (Test-Path $Path)) {
                try {
                    $null = New-Item -ItemType Directory -Path $Path -ErrorAction Stop
                } catch {
                    Stop-Function -Message "Failure" -ErrorRecord $_
                    return
                }
            }

            if ($Exclude -notcontains 'SpConfigure') {
                $fileCounter++
                Write-Message -Level Verbose -Message "Exporting SQL Server Configuration"
                Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Exporting SQL Server Configuration"
                Export-DbaSpConfigure -SqlInstance $server -Path "$Path\$fileCounter-sp_configure.sql"
                if (-not (Test-Path "$Path\$fileCounter-sp_configure.sql")) {
                    $fileCounter--
                }
            }

            if ($Exclude -notcontains 'CustomErrors') {
                $fileCounter++
                Write-Message -Level Verbose -Message "Exporting custom errors (user defined messages)"
                Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Exporting custom errors (user defined messages)"
                $null = Get-DbaCustomError -SqlInstance $server | Export-DbaScript -Path "$Path\$fileCounter-customererrors.sql" -Append -BatchSeparator $BatchSeparator -ScriptingOptionsObject $ScriptingOption
                Get-ChildItem -ErrorAction Ignore -Path "$Path\$fileCounter-customererrors.sql"
                if (-not (Test-Path "$Path\$fileCounter-customererrors.sql")) {
                    $fileCounter--
                }
            }

            if ($Exclude -notcontains 'ServerRoles') {
                $fileCounter++
                Write-Message -Level Verbose -Message "Exporting server roles"
                Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Exporting server roles"
                $null = Get-DbaServerRole -SqlInstance $server | Export-DbaScript -Path "$Path\$fileCounter-serverroles.sql" -Append -BatchSeparator $BatchSeparator -ScriptingOptionsObject $ScriptingOption
                Get-ChildItem -ErrorAction Ignore -Path "$Path\$fileCounter-serverroles.sql"
                if (-not (Test-Path "$Path\$fileCounter-serverroles.sql")) {
                    $fileCounter--
                }
            }

            if ($Exclude -notcontains 'Credentials') {
                $fileCounter++
                Write-Message -Level Verbose -Message "Exporting SQL credentials"
                Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Exporting SQL credentials"
                $null = Export-DbaCredential -SqlInstance $server -Credential $Credential -Path "$Path\$fileCounter-credentials.sql" -Append
                Get-ChildItem -ErrorAction Ignore -Path "$Path\$fileCounter-credentials.sql"
                if (-not (Test-Path "$Path\$fileCounter-credentials.sql")) {
                    $fileCounter--
                }
            }

            if ($Exclude -notcontains 'DatabaseMail') {
                $fileCounter++
                Write-Message -Level Verbose -Message "Exporting database mail"
                Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Exporting database mail"
                $null = Get-DbaDbMailConfig -SqlInstance $server | Export-DbaScript -Path "$Path\$fileCounter-dbmail.sql" -Append -BatchSeparator $BatchSeparator -ScriptingOptionsObject $ScriptingOption
                $null = Get-DbaDbMailAccount -SqlInstance $server | Export-DbaScript -Path "$Path\$fileCounter-dbmail.sql" -Append -BatchSeparator $BatchSeparator -ScriptingOptionsObject $ScriptingOption
                $null = Get-DbaDbMailProfile -SqlInstance $server | Export-DbaScript -Path "$Path\$fileCounter-dbmail.sql" -Append -BatchSeparator $BatchSeparator -ScriptingOptionsObject $ScriptingOption
                $null = Get-DbaDbMailServer -SqlInstance $server | Export-DbaScript -Path "$Path\$fileCounter-dbmail.sql" -Append -BatchSeparator $BatchSeparator -ScriptingOptionsObject $ScriptingOption
                $null = Get-DbaDbMail -SqlInstance $server | Export-DbaScript -Path "$Path\$fileCounter-dbmail.sql" -Append -BatchSeparator $BatchSeparator -ScriptingOptionsObject $ScriptingOption
                Get-ChildItem -ErrorAction Ignore -Path "$Path\$fileCounter-dbmail.sql"
                if (-not (Test-Path "$Path\$fileCounter-dbmail.sql")) {
                    $fileCounter--
                }
            }

            if ($Exclude -notcontains 'CentralManagementServer') {
                $fileCounter++
                Write-Message -Level Verbose -Message "Exporting Central Management Server"
                Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Exporting Central Management Server"
                $null = Get-DbaCmsRegServerGroup -SqlInstance $server | Export-DbaScript -Path "$Path\$fileCounter-regserver.sql" -Append -BatchSeparator 'GO'
                $null = Get-DbaCmsRegServer -SqlInstance $server | Export-DbaScript -Path "$Path\$fileCounter-regserver.sql" -Append -BatchSeparator 'GO'
                Get-ChildItem -ErrorAction Ignore -Path "$Path\$fileCounter-regserver.sql"
                if (-not (Test-Path "$Path\$fileCounter-regserver.sql")) {
                    $fileCounter--
                }
            }

            if ($Exclude -notcontains 'BackupDevices') {
                $fileCounter++
                Write-Message -Level Verbose -Message "Exporting Backup Devices"
                Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Exporting Backup Devices"
                $null = Get-DbaBackupDevice -SqlInstance $server | Export-DbaScript -Path "$Path\$fileCounter-backupdevices.sql" -Append -BatchSeparator $BatchSeparator -ScriptingOptionsObject $ScriptingOption
                Get-ChildItem -ErrorAction Ignore -Path "$Path\$fileCounter-backupdevices.sql"
                if (-not (Test-Path "$Path\$fileCounter-backupdevices.sql")) {
                    $fileCounter--
                }
            }

            if ($Exclude -notcontains 'LinkedServers') {
                $fileCounter++
                Write-Message -Level Verbose -Message "Exporting linked servers"
                Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Exporting linked servers"
                Export-DbaLinkedServer -SqlInstance $server -Path "$Path\$fileCounter-linkedservers.sql" -Credential $Credential -Append
                if (-not (Test-Path "$Path\$fileCounter-linkedservers.sql")) {
                    $fileCounter--
                }
            }

            if ($Exclude -notcontains 'SystemTriggers') {
                $fileCounter++
                Write-Message -Level Verbose -Message "Exporting System Triggers"
                Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Exporting System Triggers"
                $null = Get-DbaServerTrigger -SqlInstance $server | Export-DbaScript -Path "$Path\$fileCounter-servertriggers.sql" -Append -BatchSeparator $BatchSeparator -ScriptingOptionsObject $ScriptingOption
                $triggers = Get-Content -Path "$Path\$fileCounter-servertriggers.sql" -Raw -ErrorAction Ignore
                if ($triggers) {
                    $triggers = $triggers.ToString() -replace 'CREATE TRIGGER', "GO`r`nCREATE TRIGGER"
                    $triggers = $triggers.ToString() -replace 'ENABLE TRIGGER', "GO`r`nENABLE TRIGGER"
                    $null = $triggers | Set-Content -Path "$Path\$fileCounter-servertriggers.sql" -Force
                    Get-ChildItem -ErrorAction Ignore -Path "$Path\$fileCounter-servertriggers.sql"
                }
                if (-not (Test-Path "$Path\$fileCounter-servertriggers.sql")) {
                    $fileCounter--
                }
            }

            if ($Exclude -notcontains 'Databases') {
                $fileCounter++
                Write-Message -Level Verbose -Message "Exporting database restores"
                Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Exporting database restores"
                Get-DbaBackupHistory -SqlInstance $server -Last | Restore-DbaDatabase -SqlInstance $server -NoRecovery:$NoRecovery -WithReplace -OutputScriptOnly -WarningAction SilentlyContinue | Out-File -FilePath "$Path\$fileCounter-databases.sql" -Append
                Get-ChildItem -ErrorAction Ignore -Path "$Path\$fileCounter-databases.sql"
                if (-not (Test-Path "$Path\$fileCounter-databases.sql")) {
                    $fileCounter--
                }
            }

            if ($Exclude -notcontains 'Logins') {
                $fileCounter++
                Write-Message -Level Verbose -Message "Exporting logins"
                Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Exporting logins"
                Export-DbaLogin -SqlInstance $server -Path "$Path\$fileCounter-logins.sql" -Append -WarningAction SilentlyContinue
                if (-not (Test-Path "$Path\$fileCounter-logins.sql")) {
                    $fileCounter--
                }
            }

            if ($Exclude -notcontains 'Audits') {
                $fileCounter++
                Write-Message -Level Verbose -Message "Exporting Audits"
                Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Exporting Audits"
                $null = Get-DbaServerAudit -SqlInstance $server | Export-DbaScript -Path "$Path\$fileCounter-audits.sql" -Append -BatchSeparator $BatchSeparator -ScriptingOptionsObject $ScriptingOption
                Get-ChildItem -ErrorAction Ignore -Path "$Path\$fileCounter-audits.sql"
                if (-not (Test-Path "$Path\$fileCounter-audits.sql")) {
                    $fileCounter--
                }
            }

            if ($Exclude -notcontains 'ServerAuditSpecifications') {
                $fileCounter++
                Write-Message -Level Verbose -Message "Exporting Server Audit Specifications"
                Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Exporting Server Audit Specifications"
                $null = Get-DbaServerAuditSpecification -SqlInstance $server | Export-DbaScript -Path "$Path\$fileCounter-auditspecs.sql" -Append -BatchSeparator $BatchSeparator -ScriptingOptionsObject $ScriptingOption
                Get-ChildItem -ErrorAction Ignore -Path "$Path\$fileCounter-auditspecs.sql"
                if (-not (Test-Path "$Path\$fileCounter-auditspecs.sql")) {
                    $fileCounter--
                }
            }

            if ($Exclude -notcontains 'Endpoints') {
                $fileCounter++
                Write-Message -Level Verbose -Message "Exporting Endpoints"
                Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Exporting Endpoints"
                $null = Get-DbaEndpoint -SqlInstance $server | Where-Object IsSystemObject -eq $false | Export-DbaScript -Path "$Path\$fileCounter-endpoints.sql" -Append -BatchSeparator $BatchSeparator -ScriptingOptionsObject $ScriptingOption
                Get-ChildItem -ErrorAction Ignore -Path "$Path\$fileCounter-endpoints.sql"
                if (-not (Test-Path "$Path\$fileCounter-endpoints.sql")) {
                    $fileCounter--
                }
            }

            if ($Exclude -notcontains 'PolicyManagement') {
                $fileCounter++
                Write-Message -Level Verbose -Message "Exporting Policy Management"
                Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Exporting Policy Management"
                $null = Get-DbaPbmCondition -SqlInstance $server | Export-DbaScript -Path "$Path\$fileCounter-policymanagement.sql" -Append -BatchSeparator $BatchSeparator
                $null = Get-DbaPbmObjectSet -SqlInstance $server | Export-DbaScript -Path "$Path\$fileCounter-policymanagement.sql" -Append -BatchSeparator $BatchSeparator
                $null = Get-DbaPbmPolicy -SqlInstance $server | Export-DbaScript -Path "$Path\$fileCounter-policymanagement.sql" -Append -BatchSeparator $BatchSeparator
                Get-ChildItem -ErrorAction Ignore -Path "$Path\$fileCounter-policymanagement.sql"
                if (-not (Test-Path "$Path\$fileCounter-policymanagement.sql")) {
                    $fileCounter--
                }
            }

            if ($Exclude -notcontains 'ResourceGovernor') {
                $fileCounter++
                Write-Message -Level Verbose -Message "Exporting Resource Governor"
                Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Exporting Resource Governor"
                $null = Get-DbaResourceGovernor -SqlInstance $server | Export-DbaScript -Path "$Path\$fileCounter-resourcegov.sql" -Append -BatchSeparator $BatchSeparator -ScriptingOptionsObject $ScriptingOption
                $null = Get-DbaRgClassifierFunction -SqlInstance $server | Export-DbaScript -Path "$Path\$fileCounter-resourcegov.sql" -Append -BatchSeparator $BatchSeparator -ScriptingOptionsObject $ScriptingOption
                $null = Get-DbaRgResourcePool -SqlInstance $server | Where-Object Name -notin 'default', 'internal' | Export-DbaScript -Path "$Path\$fileCounter-resourcegov.sql" -Append -BatchSeparator $BatchSeparator -ScriptingOptionsObject $ScriptingOption
                $null = Get-DbaRgWorkloadGroup -SqlInstance $server | Where-Object Name -notin 'default', 'internal' | Export-DbaScript -Path "$Path\$fileCounter-resourcegov.sql" -Append -BatchSeparator $BatchSeparator -ScriptingOptionsObject $ScriptingOption
                $null = Add-Content -Value "ALTER RESOURCE GOVERNOR RECONFIGURE" -Path "$Path\$stepCounter-resourcegov.sql"
                Get-ChildItem -ErrorAction Ignore -Path "$Path\$fileCounter-resourcegov.sql"
                if (-not (Test-Path "$Path\$fileCounter-resourcegov.sql")) {
                    $fileCounter--
                }
            }

            if ($Exclude -notcontains 'ExtendedEvents') {
                $fileCounter++
                Write-Message -Level Verbose -Message "Exporting Extended Events"
                Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Exporting Extended Events"
                $null = Get-DbaXESession -SqlInstance $server | Export-DbaScript -Path "$Path\$fileCounter-extendedevents.sql" -Append -BatchSeparator 'GO'
                Get-ChildItem -ErrorAction Ignore -Path "$Path\$fileCounter-extendedevents.sql"
                if (-not (Test-Path "$Path\$fileCounter-extendedevents.sql")) {
                    $fileCounter--
                }
            }

            if ($Exclude -notcontains 'AgentServer') {
                $fileCounter++
                Write-Message -Level Verbose -Message "Exporting job server"

                Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Exporting job server"
                $null = Get-DbaAgentJobCategory -SqlInstance $server | Export-DbaScript -Path "$Path\$fileCounter-sqlagent.sql" -Append -BatchSeparator $BatchSeparator -ScriptingOptionsObject $ScriptingOption
                $null = Get-DbaAgentOperator -SqlInstance $server | Export-DbaScript -Path "$Path\$fileCounter-sqlagent.sql" -Append -BatchSeparator $BatchSeparator -ScriptingOptionsObject $ScriptingOption
                $null = Get-DbaAgentAlert -SqlInstance $server | Export-DbaScript -Path "$Path\$fileCounter-sqlagent.sql" -Append -BatchSeparator $BatchSeparator -ScriptingOptionsObject $ScriptingOption
                $null = Get-DbaAgentProxy -SqlInstance $server | Export-DbaScript  -Path "$Path\$fileCounter-sqlagent.sql" -Append -BatchSeparator $BatchSeparator -ScriptingOptionsObject $ScriptingOption
                $null = Get-DbaAgentSchedule -SqlInstance $server | Export-DbaScript -Path "$Path\$fileCounter-sqlagent.sql" -Append -BatchSeparator $BatchSeparator -ScriptingOptionsObject $ScriptingOption
                $null = Get-DbaAgentJob -SqlInstance $server | Export-DbaScript -Path "$Path\$fileCounter-sqlagent.sql" -Append -BatchSeparator $BatchSeparator -ScriptingOptionsObject $ScriptingOption
                Get-ChildItem -ErrorAction Ignore -Path "$Path\$fileCounter-sqlagent.sql"
                if (-not (Test-Path "$Path\$fileCounter-sqlagent.sql")) {
                    $fileCounter--
                }
            }

            if ($Exclude -notcontains 'ReplicationSettings') {
                $fileCounter++
                Write-Message -Level Verbose -Message "Exporting replication settings"
                Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Exporting replication settings"
                $null = Export-DbaRepServerSetting -SqlInstance $instance -SqlCredential $SqlCredential -Path "$Path\$fileCounter-replication.sql"
                Get-ChildItem -ErrorAction Ignore -Path "$Path\$fileCounter-replication.sql"
                if (-not (Test-Path "$Path\$fileCounter-replication.sql")) {
                    $fileCounter--
                }
            }

            if ($Exclude -notcontains 'SysDbUserObjects') {
                $fileCounter++
                Write-Message -Level Verbose -Message "Exporting user objects in system databases (this can take a minute)."
                Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Exporting user objects in system databases (this can take a minute)."
                $null = Get-DbaSysDbUserObjectScript -SqlInstance $server | Out-File -FilePath "$Path\$fileCounter-userobjectsinsysdbs.sql" -Append
                Get-ChildItem -ErrorAction Ignore -Path "$Path\$fileCounter-userobjectsinsysdbs.sql"
                if (-not (Test-Path "$Path\$fileCounter-userobjectsinsysdbs.sql")) {
                    $fileCounter--
                }
            }

            if ($Exclude -notcontains 'AvailabilityGroups') {
                $fileCounter++
                Write-Message -Level Verbose -Message "Exporting availability group"
                Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Exporting availability groups"
                $null = Get-DbaAvailabilityGroup -SqlInstance $server -WarningAction SilentlyContinue | Export-DbaScript -Path "$Path\$fileCounter-DbaAvailabilityGroups.sql" -Append -BatchSeparator $BatchSeparator #-ScriptingOptionsObject $ScriptingOption
                Get-ChildItem -ErrorAction Ignore -Path "$Path\$fileCounter-DbaAvailabilityGroups.sql"
                if (-not (Test-Path "$Path\$fileCounter-DbaAvailabilityGroups.sql")) {
                    $fileCounter--
                }
            }

            Write-Progress -Activity "Performing Instance Export for $instance" -Completed
        }
    }
    end {
        $totaltime = ($elapsed.Elapsed.toString().Split(".")[0])
        Write-Message -Level Verbose -Message "SQL Server export complete."
        Write-Message -Level Verbose -Message "Export started: $started"
        Write-Message -Level Verbose -Message "Export completed: $(Get-Date)"
        Write-Message -Level Verbose -Message "Total Elapsed time: $totaltime"
    }
}

tools\dbatools\functions\Export-DbaLinkedServer.ps1

function Export-DbaLinkedServer {
    <#
    .SYNOPSIS
        Exports linked servers INCLUDING PASSWORDS, unless specified otherwise, to sql file.

    .DESCRIPTION
        Exports linked servers INCLUDING PASSWORDS, unless specified otherwise, to sql file.

        Requires remote Windows access if exporting the password.

    .PARAMETER SqlInstance
        Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2005 or higher.

    .PARAMETER SqlCredential
        Login to the target instance using alternative linked servers. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Credential
        Login to the target OS using alternative linked servers. Accepts credential objects (Get-Credential)

    .PARAMETER Path
        The path to the exported sql file.

    .PARAMETER LinkedServer
        The linked server(s) to export. If unspecified, all linked servers will be processed.

    .PARAMETER InputObject
        Allow credentials to be piped in from Get-DbaLinkedServer

    .PARAMETER ExcludePassword
        Exports the linked server without any sensitive information.

    .PARAMETER Append
        Append to Path

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: LinkedServer
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Export-DbaLinkedServer -SqlInstance sql2017 -Path C:\temp\ls.sql

        Exports the linked servers, including passwords, from sql2017 to the file C:\temp\ls.sql

    .EXAMPLE
        PS C:\> Export-DbaLinkedServer -SqlInstance sql2017 -Path C:\temp\ls.sql -ExcludePassword

        Exports the linked servers, without passwords, from sql2017 to the file C:\temp\ls.sql

    #>
    [CmdletBinding()]
    param (
        [Parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [string[]]$LinkedServer,
        [PSCredential]$SqlCredential,
        [PSCredential]$Credential,
        [string]$Path,
        [switch]$ExcludePassword,
        [switch]$Append,
        [Microsoft.SqlServer.Management.Smo.LinkedServer[]]$InputObject,
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential -MinimumVersion 9
                $InputObject += $server.LinkedServers
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            if ($LinkedServer) {
                $InputObject = $InputObject | Where-Object Name -in $LinkedServer
            }

            if (-not $InputObject) {
                Write-Message -Level Verbose -Message "Nothing to export"
                continue
            }

            if (!(Test-SqlSa -SqlInstance $instance -SqlCredential $sqlcredential)) {
                Stop-Function -Message "Not a sysadmin on $instance. Quitting." -Target $instance -Continue
            }

            Write-Message -Level Verbose -Message "Getting NetBios name for $instance."
            $sourceNetBios = Resolve-NetBiosName $server

            Write-Message -Level Verbose -Message "Checking if Remote Registry is enabled on $instance."
            try {
                Invoke-Command2 -Raw -Credential $Credential -ComputerName $sourceNetBios -ScriptBlock { Get-ItemProperty -Path "HKLM:\SOFTWARE\" } -ErrorAction Stop
            } catch {
                Stop-Function -Message "Can't connect to registry on $instance." -Target $sourceNetBios -ErrorRecord $_
                return
            }

            if (-not (Test-Bound -ParameterName Path)) {
                $timenow = (Get-Date -uformat "%m%d%Y%H%M%S")
                $mydocs = [Environment]::GetFolderPath('MyDocuments')
                $path = "$mydocs\$($server.name.replace('\', '$'))-$timenow-linkedserver.sql"
            }

            $sql = @()

            if ($ExcludePassword) {
                $sql += $InputObject.Script()
            } else {
                try {
                    $decrypted = Get-DecryptedObject -SqlInstance $server -Type LinkedServer
                } catch {
                    Stop-Function -Continue -Message "Failure" -ErrorRecord $_
                }

                foreach ($ls in $InputObject) {
                    $currentls = $decrypted | Where-Object Name -eq $ls.Name

                    if ($currentls.Password) {
                        $password = $currentls.Password.Replace("'", "''")

                        $tempsql = $ls.Script()
                        $tempsql = $tempsql.Replace(' /* For security reasons the linked server remote logins password is changed with ######## */', '')
                        $tempsql = $tempsql.Replace("rmtpassword='########'", "rmtpassword='$password'")
                        $sql += $tempsql
                    } else {
                        $sql += $ls.Script()
                    }
                }
            }

            try {
                if ($Append) {
                    Add-Content -Path $path -Value $sql
                } else {
                    Set-Content -Path $path -Value $sql
                }
                Get-ChildItem -Path $path
            } catch {
                Stop-Function -Message "Can't write to $path" -ErrorRecord $_ -Continue
            }
        }
    }
}

tools\dbatools\functions\Export-DbaLogin.ps1

function Export-DbaLogin {
    <#
    .SYNOPSIS
        Exports Windows and SQL Logins to a T-SQL file. Export includes login, SID, password, default database, default language, server permissions, server roles, db permissions, db roles.

    .DESCRIPTION
        Exports Windows and SQL Logins to a T-SQL file. Export includes login, SID, password, default database, default language, server permissions, server roles, db permissions, db roles.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. SQL Server 2000 and above supported.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Login
        The login(s) to process. Options for this list are auto-populated from the server. If unspecified, all logins will be processed.

    .PARAMETER ExcludeLogin
        The login(s) to exclude. Options for this list are auto-populated from the server.

    .PARAMETER Database
        The database(s) to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER Path
        The file to write to.

    .PARAMETER NoClobber
        If this switch is enabled, a file already existing at the path specified by Path will not be overwritten.

    .PARAMETER Append
        If this switch is enabled, content will be appended to a file already existing at the path specified by Path. If the file does not exist, it will be created.

    .PARAMETER ExcludeJobs
        If this switch is enabled, Agent job ownership will not be exported.

    .PARAMETER ExcludeDatabases
        If this switch is enabled, mappings for databases will not be exported.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER ExcludeGoBatchSeparator
        If specified, will NOT script the 'GO' batch separator.

    .PARAMETER DestinationVersion
        To say to which version the script should be generated. If not specified will use instance major version.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .NOTES
        Tags: Export, Login
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Export-DbaLogin

    .EXAMPLE
        PS C:\> Export-DbaLogin -SqlInstance sql2005 -Path C:\temp\sql2005-logins.sql

        Exports the logins for SQL Server "sql2005" and writes them to the file "C:\temp\sql2005-logins.sql"

    .EXAMPLE
        PS C:\> Export-DbaLogin -SqlInstance sqlserver2014a -ExcludeLogin realcajun -SqlCredential $scred -Path C:\temp\logins.sql -Append

        Authenticates to sqlserver2014a using SQL Authentication. Exports all logins except for realcajun to C:\temp\logins.sql, and appends to the file if it exists. If not, the file will be created.

    .EXAMPLE
        PS C:\> Export-DbaLogin -SqlInstance sqlserver2014a -Login realcajun, netnerds -Path C:\temp\logins.sql

        Exports ONLY logins netnerds and realcajun FROM sqlserver2014a to the file  C:\temp\logins.sql

    .EXAMPLE
        PS C:\> Export-DbaLogin -SqlInstance sqlserver2014a -Login realcajun, netnerds -Database HR, Accounting

        Exports ONLY logins netnerds and realcajun FROM sqlserver2014a with the permissions on databases HR and Accounting

    .EXAMPLE
        PS C:\> Export-DbaLogin -SqlInstance sqlserver2008 -Login realcajun, netnerds -Path C:\temp\login.sql -ExcludeGoBatchSeparator

        Exports ONLY logins netnerds and realcajun FROM sqlserver2008 server, to the C:\temp\login.sql file without the 'GO' batch separator.

    .EXAMPLE
        PS C:\> Export-DbaLogin -SqlInstance sqlserver2008 -Login realcajun -Path C:\temp\users.sql -DestinationVersion SQLServer2016

        Exports login realcajun from sqlserver2008 to the file C:\temp\users.sql with syntax to run on SQL Server 2016

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]
        $SqlCredential,
        [object[]]$Login,
        [object[]]$ExcludeLogin,
        [Alias("Databases")]
        [object[]]$Database,
        [Alias("OutFile", "FilePath", "FileName")]
        [string]$Path,
        [Alias("NoOverwrite")]
        [switch]$NoClobber,
        [switch]$Append,
        [switch]$ExcludeDatabases,
        [switch]$ExcludeJobs,
        [Alias('Silent')]
        [switch]$EnableException,
        [switch]$ExcludeGoBatchSeparator,
        [ValidateSet('SQLServer2000', 'SQLServer2005', 'SQLServer2008/2008R2', 'SQLServer2012', 'SQLServer2014', 'SQLServer2016', 'SQLServer2017')]
        [string]$DestinationVersion
    )

    begin {

        if ($Path) {
            if ($Path -notlike "*\*") {
                $Path = ".\$Path"
            }
            $directory = Split-Path $Path
            $exists = Test-Path $directory

            if ($exists -eq $false) {
                Write-Message -Level Warning -Message "Parent directory $directory does not exist"
            }
        }

        $outsql = @()

    }
    process {
        if (Test-FunctionInterrupt) {
            return
        }

        $server = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $sqlcredential

        if ($ExcludeDatabases -eq $false -or $Database) {
            # if we got a database or a list of databases passed
            # and we need to enumerate mappings, login.enumdatabasemappings() takes forever
            # the cool thing though is that database.enumloginmappings() is fast. A lot.
            # if we get a list of databases passed (or even the default list of all the databases)
            # we save outself a call to enumloginmappings if there is no map at all
            $DbMapping = @()
            $DbsToMap = $server.Databases
            if ($Database) {
                $DbsToMap = $DbsToMap | Where-Object Name -in $Database
            }
            foreach ($db in $DbsToMap) {
                if ($db.IsAccessible -eq $false) {
                    continue
                }
                $dbmap = $db.EnumLoginMappings()
                foreach ($el in $dbmap) {
                    $DbMapping += [pscustomobject]@{
                        Database  = $db.Name
                        UserName  = $el.Username
                        LoginName = $el.LoginName
                    }
                }
            }
        }

        foreach ($sourceLogin in $server.Logins) {
            $userName = $sourceLogin.name

            if ($Login -and $Login -notcontains $userName -or $ExcludeLogin -contains $userName) {
                continue
            }

            if ($userName.StartsWith("##") -or $userName -eq 'sa') {
                Write-Message -Level Warning -Message "Skipping $userName"
                continue
            }

            $serverName = $server

            $userBase = ($userName.Split("\")[0]).ToLower()
            if ($serverName -eq $userBase -or $userName.StartsWith("NT ")) {
                if ($Pscmdlet.ShouldProcess("console", "Stating $userName is skipped because it is a local machine name")) {
                    Write-Message -Level Warning -Message "$userName is skipped because it is a local machine name"
                    continue
                }
            }

            if ($Pscmdlet.ShouldProcess("Outfile", "Adding T-SQL for login $userName")) {
                if ($Path) {
                    Write-Message -Level Verbose -Message "Exporting $userName"
                }

                $outsql += "`r`nUSE master`n"
                # Getting some attributes
                $defaultDb = $sourceLogin.DefaultDatabase
                $language = $sourceLogin.Language

                if ($sourceLogin.PasswordPolicyEnforced -eq $false) {
                    $checkPolicy = "OFF"
                } else {
                    $checkPolicy = "ON"
                }

                if (!$sourceLogin.PasswordExpirationEnabled) {
                    $checkExpiration = "OFF"
                } else {
                    $checkExpiration = "ON"
                }

                # Attempt to script out SQL Login
                if ($sourceLogin.LoginType -eq "SqlLogin") {
                    $sourceLoginName = $sourceLogin.name

                    switch ($server.versionMajor) {
                        0 {
                            $sql = "SELECT CONVERT(VARBINARY(256),password) AS hashedpass FROM master.dbo.syslogins WHERE loginname='$sourceLoginName'"
                        }
                        8 {
                            $sql = "SELECT CONVERT(VARBINARY(256),password) AS hashedpass FROM dbo.syslogins WHERE name='$sourceLoginName'"
                        }
                        9 {
                            $sql = "SELECT CONVERT(VARBINARY(256),password_hash) as hashedpass FROM sys.sql_logins WHERE name='$sourceLoginName'"
                        }
                        default {
                            $sql = "SELECT CAST(CONVERT(varchar(256), CAST(LOGINPROPERTY(name,'PasswordHash') AS VARBINARY(256)), 1) AS NVARCHAR(max)) AS hashedpass FROM sys.server_principals WHERE principal_id = $($sourceLogin.id)"
                        }
                    }

                    try {
                        $hashedPass = $server.ConnectionContext.ExecuteScalar($sql)
                    } catch {
                        $hashedPassDt = $server.Databases['master'].ExecuteWithResults($sql)
                        $hashedPass = $hashedPassDt.Tables[0].Rows[0].Item(0)
                    }

                    if ($hashedPass.GetType().Name -ne "String") {
                        $passString = "0x"; $hashedPass | ForEach-Object {
                            $passString += ("{0:X}" -f $_).PadLeft(2, "0")
                        }
                        $hashedPass = $passString
                    }

                    $sid = "0x"; $sourceLogin.sid | ForEach-Object {
                        $sid += ("{0:X}" -f $_).PadLeft(2, "0")
                    }
                    $outsql += "IF NOT EXISTS (SELECT loginname FROM master.dbo.syslogins WHERE name = '$userName') CREATE LOGIN [$userName] WITH PASSWORD = $hashedPass HASHED, SID = $sid, DEFAULT_DATABASE = [$defaultDb], CHECK_POLICY = $checkPolicy, CHECK_EXPIRATION = $checkExpiration, DEFAULT_LANGUAGE = [$language]"
                }
                # Attempt to script out Windows User
                elseif ($sourceLogin.LoginType -eq "WindowsUser" -or $sourceLogin.LoginType -eq "WindowsGroup") {
                    $outsql += "IF NOT EXISTS (SELECT loginname FROM master.dbo.syslogins WHERE name = '$userName') CREATE LOGIN [$userName] FROM WINDOWS WITH DEFAULT_DATABASE = [$defaultDb], DEFAULT_LANGUAGE = [$language]"
                }
                # This script does not currently support certificate mapped or asymmetric key users.
                else {
                    Write-Message -Level Warning -Message "$($sourceLogin.LoginType) logins not supported. $($sourceLogin.Name) skipped"
                    continue
                }

                if ($sourceLogin.IsDisabled) {
                    $outsql += "ALTER LOGIN [$userName] DISABLE"
                }

                if ($sourceLogin.DenyWindowsLogin) {
                    $outsql += "DENY CONNECT SQL TO [$userName]"
                }
            }

            # Server Roles: sysadmin, bulklogin, etc
            foreach ($role in $server.Roles) {
                $roleName = $role.Name

                # SMO changed over time
                try {
                    $roleMembers = $role.EnumMemberNames()
                } catch {
                    $roleMembers = $role.EnumServerRoleMembers()
                }

                if ($roleMembers -contains $userName) {
                    if (($server.VersionMajor -lt 11 -and [string]::IsNullOrEmpty($destinationVersion)) -or ($DestinationVersion -in "SQLServer2000", "SQLServer2005", "SQLServer2008/2008R2")) {
                        $outsql += "EXEC sys.sp_addsrvrolemember @rolename=N'$roleName', @loginame=N'$userName'"
                    } else {
                        $outsql += "ALTER SERVER ROLE [$roleName] ADD MEMBER [$userName]"
                    }
                }
            }

            if ($ExcludeJobs -eq $false) {
                $ownedJobs = $server.JobServer.Jobs | Where-Object { $_.OwnerLoginName -eq $userName }

                foreach ($ownedJob in $ownedJobs) {
                    $outsql += "`n`rUSE msdb`n"
                    $outsql += "EXEC msdb.dbo.sp_update_job @job_name=N'$ownedJob', @owner_login_name=N'$userName'"
                }
            }

            if ($server.VersionMajor -ge 9) {
                # These operations are only supported by SQL Server 2005 and above.
                # Securables: Connect SQL, View any database, Administer Bulk Operations, etc.

                $perms = $server.EnumServerPermissions($userName)
                $outsql += "`n`rUSE master`n"
                foreach ($perm in $perms) {
                    $permState = $perm.permissionstate
                    $permType = $perm.PermissionType
                    $grantor = $perm.grantor

                    if ($permState -eq "GrantWithGrant") {
                        $grantWithGrant = "WITH GRANT OPTION"
                        $permState = "GRANT"
                    } else {
                        $grantWithGrant = $null
                    }

                    $outsql += "$permState $permType TO [$userName] $grantWithGrant AS [$grantor]"
                }

                # Credential mapping. Credential removal not currently supported for Syncs.
                $loginCredentials = $server.Credentials | Where-Object { $_.Identity -eq $sourceLogin.Name }
                foreach ($credential in $loginCredentials) {
                    $credentialName = $credential.Name
                    $outsql += "PRINT '$userName is associated with the $credentialName credential'"
                }
            }

            if ($ExcludeDatabases -eq $false) {
                $dbs = $sourceLogin.EnumDatabaseMappings()

                if ($Database) {
                    $dbs = $dbs | Where-Object { $_.DBName -in $Database }
                }

                # Adding database mappings and securables
                foreach ($db in $dbs) {
                    $dbName = $db.dbname
                    $sourceDb = $server.Databases[$dbName]
                    $dbUserName = $db.username

                    $outsql += "`r`nUSE [$dbName]`n"
                    try {
                        $sql = $server.Databases[$dbName].Users[$dbUserName].Script()
                        $outsql += $sql
                    } catch {
                        Write-Message -Level Warning -Message "User cannot be found in selected database"
                    }

                    # Skipping updating dbowner

                    # Database Roles: db_owner, db_datareader, etc
                    foreach ($role in $sourceDb.Roles) {
                        if ($role.EnumMembers() -contains $dbUserName) {
                            $roleName = $role.Name
                            if (($server.VersionMajor -lt 11 -and [string]::IsNullOrEmpty($destinationVersion)) -or ($DestinationVersion -in "SQLServer2000", "SQLServer2005", "SQLServer2008/2008R2")) {
                                $outsql += "EXEC sys.sp_addrolemember @rolename=N'$roleName', @membername=N'$dbUserName'"
                            } else {
                                $outsql += "ALTER ROLE [$roleName] ADD MEMBER [$dbUserName]"
                            }
                        }
                    }

                    # Connect, Alter Any Assembly, etc
                    $perms = $sourceDb.EnumDatabasePermissions($dbUserName)
                    foreach ($perm in $perms) {
                        $permState = $perm.PermissionState
                        $permType = $perm.PermissionType
                        $grantor = $perm.Grantor

                        if ($permState -eq "GrantWithGrant") {
                            $grantWithGrant = "WITH GRANT OPTION"
                            $permState = "GRANT"
                        } else {
                            $grantWithGrant = $null
                        }

                        $outsql += "$permState $permType TO [$userName] $grantWithGrant AS [$grantor]"
                    }
                }
            }
        }
    }
    end {
        $sql = $sql | Where-Object { $_ -notlike "CREATE USER [dbo] FOR LOGIN * WITH DEFAULT_SCHEMA=[dbo]" }

        if ($ExcludeGoBatchSeparator) {
            $sql = $outsql
        } else {
            $sql = $outsql -join "`r`nGO`r`n"
            #add the final GO
            $sql += "`r`nGO"
        }

        if ($Path) {
            $sql | Out-File -Encoding UTF8 -FilePath $Path -Append:$Append -NoClobber:$NoClobber
            Get-ChildItem $Path
        } else {
            $sql
        }
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Export-SqlLogin
    }
}

tools\dbatools\functions\Export-DbaPfDataCollectorSetTemplate.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Export-DbaPfDataCollectorSetTemplate {
    <#
    .SYNOPSIS
        Exports a new Data Collector Set XML Template.

    .DESCRIPTION
        Exports a Data Collector Set XML Template from Get-DbaPfDataCollectorSet. Exports to "$home\Documents\Performance Monitor Templates" by default.

    .PARAMETER ComputerName
        The target computer. Defaults to localhost.

    .PARAMETER Credential
        Allows you to login to $ComputerName using alternative credentials. To use:

        $cred = Get-Credential, then pass $cred object to the -Credential parameter.

    .PARAMETER CollectorSet
        The name of the collector set(s) to export.

    .PARAMETER Path
        The path to export the file. Can be .xml or directory.

    .PARAMETER InputObject
        Accepts the object output by Get-DbaPfDataCollectorSetTemplate via the pipeline.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Performance, DataCollector
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Export-DbaPfDataCollectorSetTemplate

    .EXAMPLE
        PS C:\> Export-DbaPfDataCollectorSetTemplate -ComputerName sql2017 -Path C:\temp\pf

        Exports all data collector sets from to the C:\temp\pf folder.

    .EXAMPLE
        PS C:\> Get-DbaPfDataCollectorSet ComputerName sql2017 -CollectorSet 'System Correlation' | Export-DbaPfDataCollectorSetTemplate -Path C:\temp

        Exports the 'System Correlation' data collector set from sql2017 to C:\temp.

    #>
    [CmdletBinding()]
    param (
        [DbaInstance[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [Alias("DataCollectorSet")]
        [string[]]$CollectorSet,
        [string]$Path = "$home\Documents\Performance Monitor Templates",
        [Parameter(ValueFromPipeline)]
        [object[]]$InputObject,
        [switch]$EnableException
    )
    process {
        if ($InputObject.Credential -and (Test-Bound -ParameterName Credential -Not)) {
            $Credential = $InputObject.Credential
        }

        if (-not $InputObject -or ($InputObject -and (Test-Bound -ParameterName ComputerName))) {
            foreach ($computer in $ComputerName) {
                $InputObject += Get-DbaPfDataCollectorSet -ComputerName $computer -Credential $Credential -CollectorSet $CollectorSet
            }
        }

        foreach ($object in $InputObject) {
            if (-not $object.DataCollectorSetObject) {
                Stop-Function -Message "InputObject is not of the right type. Please use Get-DbaPfDataCollectorSet."
                return
            }

            $csname = Remove-InvalidFileNameChars -Name $object.Name

            if ($path.EndsWith(".xml")) {
                $filename = $path
            } else {
                $filename = "$path\$csname.xml"
                if (-not (Test-Path -Path $path)) {
                    $null = New-Item -Type Directory -Path $path
                }
            }
            Write-Message -Level Verbose -Message "Wrote $csname to $filename."
            Set-Content -Path $filename -Value $object.Xml -Encoding Unicode
            Get-ChildItem -Path $filename
        }
    }
}

tools\dbatools\functions\Export-DbaRepServerSetting.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Export-DbaRepServerSetting {
    <#
    .SYNOPSIS
        Exports replication server settings to file.

    .DESCRIPTION
        Exports replication server settings to file.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Path
        Specifies the path to a file which will contain the output.

    .PARAMETER Passthru
        Output script to console

    .PARAMETER NoClobber
        Do not overwrite file

    .PARAMETER Encoding
        Specifies the file encoding. The default is UTF8.

        Valid values are:
        -- ASCII: Uses the encoding for the ASCII (7-bit) character set.
        -- BigEndianUnicode: Encodes in UTF-16 format using the big-endian byte order.
        -- Byte: Encodes a set of characters into a sequence of bytes.
        -- String: Uses the encoding type for a string.
        -- Unicode: Encodes in UTF-16 format using the little-endian byte order.
        -- UTF7: Encodes in UTF-7 format.
        -- UTF8: Encodes in UTF-8 format.
        -- Unknown: The encoding type is unknown or invalid. The data can be treated as binary.

    .PARAMETER Append
        Append to file

    .PARAMETER ScriptOption
        Not real sure how to use this yet

    .PARAMETER InputObject
        Allows piping from Get-DbaRepServer

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Replication
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Export-DbaRepServerSetting -SqlInstance sql2017 -Path C:\temp\replication.sql

        Exports the replication settings on sql2017 to the file C:\temp\replication.sql

    .EXAMPLE
        PS C:\> Get-DbaRepServer -SqlInstance sql2017 | Export-DbaRepServerSettings -Path C:\temp\replication.sql

        Exports the replication settings on sql2017 to the file C:\temp\replication.sql

    #>
    [CmdletBinding()]
    param (
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string]$Path,
        [object[]]$ScriptOption,
        [Parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Replication.ReplicationServer[]]$InputObject,
        [ValidateSet('ASCII', 'BigEndianUnicode', 'Byte', 'String', 'Unicode', 'UTF7', 'UTF8', 'Unknown')]
        [string]$Encoding = 'UTF8',
        [switch]$Passthru,
        [switch]$NoClobber,
        [switch]$Append,
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            $InputObject += Get-DbaRepServer -SqlInstance $instance -SqlCredential $sqlcredential
        }

        foreach ($repserver in $InputObject) {
            $server = $repserver.SqlServerName
            if (-not (Test-Bound -ParameterName Path)) {
                $timenow = (Get-Date -uformat "%m%d%Y%H%M%S")
                $mydocs = [Environment]::GetFolderPath('MyDocuments')
                $path = "$mydocs\$($server.replace('\', '$'))-$timenow-replication.sql"
            }
            try {
                if (-not $ScriptOption) {
                    $out = $repserver.Script([Microsoft.SqlServer.Replication.ScriptOptions]::Creation `
                            -bor [Microsoft.SqlServer.Replication.ScriptOptions]::IncludeAll `
                            -bor [Microsoft.SqlServer.Replication.ScriptOptions]::EnableReplicationDB `
                            -bor [Microsoft.SqlServer.Replication.ScriptOptions]::IncludeInstallDistributor
                    )
                } else {
                    $out = $repserver.Script($scriptOption)
                }
            } catch {
                Stop-Function -ErrorRecord $_ -Message "Replication export failed. Is it setup?" -Continue
            }
            if ($Passthru) {
                "exec sp_dropdistributor @no_checks = 1, @ignore_distributor = 1" | Out-String
                $out | Out-String
            }

            if ($Path) {

                "exec sp_dropdistributor @no_checks = 1, @ignore_distributor = 1" | Out-File -FilePath $path -Encoding $encoding -Append
                $out | Out-File -FilePath $path -Encoding $encoding -Append
            }
        }
    }
}

tools\dbatools\functions\Export-DbaScript.ps1

function Export-DbaScript {
    <#
    .SYNOPSIS
        Exports scripts from SQL Management Objects (SMO)

    .DESCRIPTION
        Exports scripts from SQL Management Objects

    .PARAMETER InputObject
        A SQL Management Object such as the one returned from Get-DbaLogin

    .PARAMETER Path
        The output filename and location. If no path is specified, one will be created. If the file already exists, the output will be appended.

    .PARAMETER Encoding
        Specifies the file encoding. The default is UTF8.

        Valid values are:
        -- ASCII: Uses the encoding for the ASCII (7-bit) character set.
        -- BigEndianUnicode: Encodes in UTF-16 format using the big-endian byte order.
        -- Byte: Encodes a set of characters into a sequence of bytes.
        -- String: Uses the encoding type for a string.
        -- Unicode: Encodes in UTF-16 format using the little-endian byte order.
        -- UTF7: Encodes in UTF-7 format.
        -- UTF8: Encodes in UTF-8 format.
        -- Unknown: The encoding type is unknown or invalid. The data can be treated as binary.

    .PARAMETER Passthru
        Output script to console

    .PARAMETER ScriptingOptionsObject
        An SMO Scripting Object that can be used to customize the output - see New-DbaScriptingOption

    .PARAMETER BatchSeparator
        Specifies the Batch Separator to use. Default is None

    .PARAMETER NoPrefix
        Do not include a Prefix

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed

    .PARAMETER NoClobber
        Do not overwrite file

    .PARAMETER Append
        Append to file

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Migration, Backup, Export
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Export-DbaScript

    .EXAMPLE
        PS C:\> Get-DbaAgentJob -SqlInstance sql2016 | Export-DbaScript

        Exports all jobs on the SQL Server sql2016 instance using a trusted connection - automatically determines filename as .\sql2016-Job-Export-date.sql

    .EXAMPLE
        PS C:\> Get-DbaAgentJob -SqlInstance sql2016 | Export-DbaScript -Path C:\temp\export.sql -Append

        Exports all jobs on the SQL Server sql2016 instance using a trusted connection - Will append the output to the file C:\temp\export.sql if it already exists
        Script does not include Batch Separator and will not compile

    .EXAMPLE
        PS C:\> Get-DbaDbTable -SqlInstance sql2016 -Database MyDatabase -Table 'dbo.Table1', 'dbo.Table2' -SqlCredential sqladmin | Export-DbaScript -Path C:\temp\export.sql

        Exports only script for 'dbo.Table1' and 'dbo.Table2' in MyDatabase to C:temp\export.sql and uses the SQL login "sqladmin" to login to sql2016

    .EXAMPLE
        PS C:\> Get-DbaAgentJob -SqlInstance sql2016 -Job syspolicy_purge_history, 'Hourly Log Backups' -SqlCredential sqladmin | Export-DbaScript -Path C:\temp\export.sql -NoPrefix

        Exports only syspolicy_purge_history and 'Hourly Log Backups' to C:temp\export.sql and uses the SQL login "sqladmin" to login to sql2016
        Suppress the output of a Prefix

    .EXAMPLE
        PS C:\> $options = New-DbaScriptingOption
        PS C:\> $options.ScriptSchema = $true
        PS C:\> $options.IncludeDatabaseContext  = $true
        PS C:\> $options.IncludeHeaders = $false
        PS C:\> $Options.NoCommandTerminator = $false
        PS C:\> $Options.ScriptBatchTerminator = $true
        PS C:\> $Options.AnsiFile = $true
        PS C:\> Get-DbaAgentJob -SqlInstance sql2016 -Job syspolicy_purge_history, 'Hourly Log Backups' -SqlCredential sqladmin | Export-DbaScript -Path C:\temp\export.sql -ScriptingOptionsObject $options

        Exports only syspolicy_purge_history and 'Hourly Log Backups' to C:temp\export.sql and uses the SQL login "sqladmin" to login to sql2016
        Appends a batch separator at end of each script.

    .EXAMPLE
        PS C:\> Get-DbaAgentJob -SqlInstance sql2014 | Export-DbaScript -Passthru | ForEach-Object { $_.Replace('sql2014','sql2016') } | Set-Content -Path C:\temp\export.sql

        Exports jobs and replaces all instances of the servername "sql2014" with "sql2016" then writes to C:\temp\export.sql

    .EXAMPLE
        PS C:\> $options = New-DbaScriptingOption
        PS C:\> $options.ScriptSchema = $true
        PS C:\> $options.IncludeDatabaseContext  = $true
        PS C:\> $options.IncludeHeaders = $false
        PS C:\> $Options.NoCommandTerminator = $false
        PS C:\> $Options.ScriptBatchTerminator = $true
        PS C:\> $Options.AnsiFile = $true
        PS C:\> $Databases = Get-DbaDatabase -SqlInstance sql2016 -ExcludeDatabase master, model, msdb, tempdb
        PS C:\> foreach ($db in $Databases) {
        >>        Export-DbaScript -InputObject $db -Path C:\temp\export.sql -Append -Encoding UTF8 -ScriptingOptionsObject $options -NoPrefix
        >> }

        Exports Script for each database on sql2016 excluding system databases
        Uses Scripting options to ensure Batch Terminator is set
        Will append the output to the file C:\temp\export.sql if it already exists

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [object[]]$InputObject,
        [Alias("ScriptingOptionObject")]
        [Microsoft.SqlServer.Management.Smo.ScriptingOptions]$ScriptingOptionsObject,
        [string]$Path,
        [ValidateSet('ASCII', 'BigEndianUnicode', 'Byte', 'String', 'Unicode', 'UTF7', 'UTF8', 'Unknown')]
        [string]$Encoding = 'UTF8',
        [string]$BatchSeparator = '',
        [switch]$NoPrefix,
        [switch]$Passthru,
        [switch]$NoClobber,
        [switch]$Append,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        $executingUser = [Security.Principal.WindowsIdentity]::GetCurrent().Name
        $commandName = $MyInvocation.MyCommand.Name
        $timeNow = (Get-Date -uformat "%m%d%Y%H%M%S")
        $prefixArray = @()
    }

    process {
        foreach ($object in $InputObject) {

            $typename = $object.GetType().ToString()

            if ($typename.StartsWith('Microsoft.SqlServer.')) {
                $shortype = $typename.Split(".")[-1]
            } else {
                Stop-Function -Message "InputObject is of type $typename which is not a SQL Management Object. Only SMO objects are supported." -Category InvalidData -Target $object -Continue
            }

            if ($shortype -in "LinkedServer", "Credential", "Login") {
                Write-Message -Level Warning -Message "Support for $shortype is limited at this time. No passwords, hashed or otherwise, will be exported if they exist."
            }

            # Just gotta add the stuff that Nic Cain added to his script

            if ($shortype -eq "Configuration") {
                Write-Message -Level Warning -Message "Support for $shortype is limited at this time."
            }

            # Find the server object to pass on to the function
            $parent = $object.parent

            do {
                if ($parent.Urn.Type -ne "Server") {
                    $parent = $parent.Parent
                }
            }
            until (($parent.Urn.Type -eq "Server") -or (-not $parent))

            if (-not $parent -and -not (Get-Member -InputObject $object -Name ScriptCreate) ) {
                Stop-Function -Message "Failed to find valid SMO server object in input: $object." -Category InvalidData -Target $object -Continue
            }

            try {
                $server = $parent
                if (-not $server) {
                    $server = $object.Parent
                }
                $serverName = $server.Name.Replace('\', '$')

                if ($ScriptingOptionsObject) {
                    $scripter = New-Object Microsoft.SqlServer.Management.Smo.Scripter $server
                    $scripter.Options = $ScriptingOptionsObject
                }

                if (!$passthru) {
                    if ($path) {
                        $actualPath = $path
                    } else {
                        $actualPath = "$serverName-$shortype-Export-$timeNow.sql"
                    }
                }

                if ($NoPrefix) {
                    $prefix = ""
                } else {
                    $prefix = "/*`n`tCreated by $executingUser using dbatools $commandName for objects on $serverName at $(Get-Date)`n`tSee https://dbatools.io/$commandName for more information`n*/"
                }

                if ($passthru) {
                    $prefix | Out-String
                } else {
                    if ($prefixArray -notcontains $actualPath) {

                        if ((Test-Path -Path $actualPath) -and $NoClobber) {
                            Stop-Function -Message "File already exists. If you want to overwrite it remove the -NoClobber parameter. If you want to append data, please Use -Append parameter." -Target $actualPath -Continue
                        }
                        #Only at the first output we use the passed variables Append & NoClobber. For this execution the next ones need to buse -Append
                        $prefix | Out-File -FilePath $actualPath -Encoding $encoding -Append:$Append -NoClobber:$NoClobber
                        $prefixArray += $actualPath
                    }
                }

                if ($Pscmdlet.ShouldProcess($env:computername, "Exporting $object from $server to $actualPath")) {
                    Write-Message -Level Verbose -Message "Exporting $object"

                    if ($passthru) {
                        if ($ScriptingOptionsObject) {
                            foreach ($script in $scripter.EnumScript($object)) {
                                if ($BatchSeparator -ne "") {
                                    $script = "$script`r`n$BatchSeparator`r`n"
                                }
                                $script | Out-String
                            }
                        } else {
                            if (Get-Member -Name ScriptCreate -InputObject $object) {
                                $script = $object.ScriptCreate().GetScript()
                            } else {
                                $script = $object.Script()
                            }

                            if ($BatchSeparator -ne "") {
                                $script = "$script`r`n$BatchSeparator`r`n"
                            }
                            $script  | Out-String
                        }
                    } else {
                        if ($ScriptingOptionsObject) {
                            if ($ScriptingOptionsObject.ScriptBatchTerminator) {
                                $ScriptingOptionsObject.AppendToFile = $true
                                $ScriptingOptionsObject.ToFileOnly = $true
                                $ScriptingOptionsObject.FileName = $actualPath
                                $object.Script($ScriptingOptionsObject)
                            } else {
                                foreach ($script in $scripter.EnumScript($object)) {
                                    if ($BatchSeparator -ne "") {
                                        $script = "$script`r`n$BatchSeparator`r`n"
                                    }
                                    $script | Out-File -FilePath $actualPath -Encoding $encoding -Append
                                }
                            }

                        } else {
                            if (Get-Member -Name ScriptCreate -InputObject $object) {
                                $script = $object.ScriptCreate().GetScript()
                            } else {
                                $script = $object.Script()
                            }
                            if ($BatchSeparator -ne "") {
                                $script = "$script`r`n$BatchSeparator`r`n"
                            }
                            $script | Out-File -FilePath $actualPath -Encoding $encoding -Append
                        }
                    }

                    if (-not $passthru) {
                        Write-Message -Level Verbose -Message "Exported $object on $($server.Name) to $actualPath"
                        Get-ChildItem -Path $actualPath
                    }
                }
            } catch {
                $message = $_.Exception.InnerException.InnerException.InnerException.Message
                if (-not $message) {
                    $message = $_.Exception
                }
                Stop-Function -Message "Failure on $($server.Name) | $message" -Target $server
            }
        }
    }
}

tools\dbatools\functions\Export-DbaSpConfigure.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Export-DbaSpConfigure {
    <#
    .SYNOPSIS
        Exports advanced sp_configure global configuration options to sql file.

    .DESCRIPTION
        Exports advanced sp_configure global configuration options to sql file.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input.
        You must have sysadmin access if needs to set 'show advanced options' to 1 and server version must be SQL Server version 2005 or higher.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Path
        Specifies the path to a file which will contain the sp_configure queries necessary to replicate the configuration settings on another instance. This file is suitable for input into Import-DbaSPConfigure.
        If not specified will output to My Documents folder with default name of ServerName-MMDDYYYYhhmmss-sp_configure.sql
        If a directory is passed then uses default name of ServerName-MMDDYYYYhhmmss-sp_configure.sql

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: SpConfig, Configure, Configuration
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Export-DbaSpConfigure

    .INPUTS
        A DbaInstanceParameter representing an array of SQL Server instances.

    .OUTPUTS
        Creates a new file for each SQL Server Instance

    .EXAMPLE
        PS C:\> Export-DbaSpConfigure -SqlInstance sourceserver

        Exports the SPConfigure settings on sourceserver. As no Path was defined outputs to My Documents folder with default name format of Servername-MMDDYYYYhhmmss-sp_configure.sql

    .EXAMPLE
        PS C:\> Export-DbaSpConfigure -SqlInstance sourceserver -Path C:\temp

        Exports the SPConfigure settings on sourceserver to the directory C:\temp using the default name format

    .EXAMPLE
        PS C:\> $cred = Get-Credential sqladmin
        PS C:\> Export-DbaSpConfigure -SqlInstance sourceserver -SqlCredential $cred -Path C:\temp\sp_configure.sql

        Exports the SPConfigure settings on sourceserver to the file C:\temp\sp_configure.sql. Uses SQL Authentication to connect. Will require SysAdmin rights if needs to set 'show advanced options'

    .EXAMPLE
        PS C:\> 'Server1', 'Server2' | Export-DbaSpConfigure -Path C:\temp\configure.sql

        Exports the SPConfigure settings for Server1 and Server2 using pipeline. As more than 1 Server adds prefix of Servername and date to the file name and saves to file like  C:\temp\Servername-MMDDYYYYhhmmss-configure.sql

    #>
    [CmdletBinding()]
    param (
        [Parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string]$Path,
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            if (-not (Test-Bound -ParameterName Path)) {
                $timenow = (Get-Date -uformat "%m%d%Y%H%M%S")
                $mydocs = [Environment]::GetFolderPath('MyDocuments')
                $filepath = "$mydocs\$($server.name.replace('\', '$'))-$timenow-sp_configure.sql"
            }

            if (Test-Path $Path -PathType Container) {
                $timenow = (Get-Date -uformat "%m%d%Y%H%M%S")
                $filepath = Join-Path -Path $Path -ChildPath "$($server.name.replace('\', '$'))-$timenow-sp_configure.sql"
            } elseif (Test-Path $Path -PathType Leaf) {
                if ($SqlInstance.Count -gt 1) {
                    $timenow = (Get-Date -uformat "%m%d%Y%H%M%S")
                    $PathData = Get-ChildItem $Path
                    $filepath = "$($PathData.DirectoryName)\$($server.name.replace('\', '$'))-$timenow-$($PathData.Name)"
                } else {
                    $filepath = $Path
                }
            }

            If (-not $filepath) {
                $filepath = $Path
            }

            $topdir = Split-Path -Path $filepath

            if (-not (Test-Path -Path $topdir)) {
                New-Item -Path $topdir -ItemType Directory
            }

            $ShowAdvancedOptions = $server.Configuration.ShowAdvancedOptions.ConfigValue

            if ($ShowAdvancedOptions -eq 0) {
                try {
                    $server.Configuration.ShowAdvancedOptions.ConfigValue = $true
                    $server.Configuration.Alter($true)
                } catch {
                    Stop-Function -Message "Can't set 'show advanced options' to 1 on instance $instance" -ErrorRecord $_ -Continue
                }
            }

            try {
                Set-Content -Path $filepath "EXEC sp_configure 'show advanced options' , 1;  RECONFIGURE WITH OVERRIDE"
            } catch {
                Stop-Function -Message "Can't write to $filepath" -ErrorRecord $_ -Continue
            }

            foreach ($sourceprop in $server.Configuration.Properties) {
                $displayname = $sourceprop.DisplayName
                $configvalue = $sourceprop.ConfigValue
                Add-Content -Path $filepath "EXEC sp_configure '$displayname' , $configvalue;"
            }

            if ($ShowAdvancedOptions -eq 0) {
                Add-Content -Path $filepath "EXEC sp_configure 'show advanced options' , 0;"
                Add-Content -Path $filepath "RECONFIGURE WITH OVERRIDE"

                $server.Configuration.ShowAdvancedOptions.ConfigValue = $false
                $server.Configuration.Alter($true)
            }
            Get-ChildItem -Path $filepath
        }
    }

    end {
        Write-Message -Level Verbose -Message "Server configuration export finished"

        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Export-SqlSpConfigure
    }
}

tools\dbatools\functions\Export-DbaUser.ps1

function Export-DbaUser {
    <#
    .SYNOPSIS
        Exports users creation and its permissions to a T-SQL file or host.

    .DESCRIPTION
        Exports users creation and its permissions to a T-SQL file or host. Export includes user, create and add to role(s), database level permissions, object level permissions.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. SQL Server 2000 and above supported.

    .PARAMETER SqlCredential
        Allows you to login to servers using alternative credentials

        $scred = Get-Credential, then pass $scred object to the -SqlCredential parameter

        Windows Authentication will be used if SqlCredential is not specified

    .PARAMETER Database
        The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto-populated from the server

    .PARAMETER User
        Export only the specified database user(s). If not specified will export all users from the database(s)

    .PARAMETER DestinationVersion
        To say to which version the script should be generated. If not specified will use database compatibility level

    .PARAMETER Path
        Specifies the full path of a file to write the script to.

    .PARAMETER NoClobber
        Do not overwrite file

    .PARAMETER Append
        Append to file

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER ScriptingOptionsObject
        A Microsoft.SqlServer.Management.Smo.ScriptingOptions object with the options that you want to use to generate the t-sql script.
        You can use the NEw-DbaScriptingOption to generate it.

    .PARAMETER ExcludeGoBatchSeparator
        If specified, will NOT script the 'GO' batch separator.

    .NOTES
        Tags: User, Export
        Author: Claudio Silva (@ClaudioESSilva)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Export-DbaUser

    .EXAMPLE
        PS C:\> Export-DbaUser -SqlInstance sql2005 -Path C:\temp\sql2005-users.sql

        Exports SQL for the users in server "sql2005" and writes them to the file "C:\temp\sql2005-users.sql"

    .EXAMPLE
        PS C:\> Export-DbaUser -SqlInstance sqlserver2014a $scred -Path C:\temp\users.sql -Append

        Authenticates to sqlserver2014a using SQL Authentication. Exports all users to C:\temp\users.sql, and appends to the file if it exists. If not, the file will be created.

    .EXAMPLE
        PS C:\> Export-DbaUser -SqlInstance sqlserver2014a -User User1, User2 -Path C:\temp\users.sql

        Exports ONLY users User1 and User2 from sqlserver2014a to the file  C:\temp\users.sql

    .EXAMPLE
        PS C:\> Export-DbaUser -SqlInstance sqlserver2008 -User User1 -Path C:\temp\users.sql -DestinationVersion SQLServer2016

        Exports user User1 from sqlserver2008 to the file C:\temp\users.sql with syntax to run on SQL Server 2016

    .EXAMPLE
        PS C:\> Export-DbaUser -SqlInstance sqlserver2008 -Database db1,db2 -Path C:\temp\users.sql

        Exports ONLY users from db1 and db2 database on sqlserver2008 server, to the C:\temp\users.sql file.

    .EXAMPLE
        PS C:\> $options = New-DbaScriptingOption
        PS C:\> $options.ScriptDrops = $false
        PS C:\> $options.WithDependencies = $true
        PS C:\> Export-DbaUser -SqlInstance sqlserver2008 -Database db1,db2 -Path C:\temp\users.sql -ScriptingOptionsObject $options

        Exports ONLY users from db1 and db2 database on sqlserver2008 server, to the C:\temp\users.sql file.
        It will not script drops but will script dependencies.

    .EXAMPLE
        PS C:\> Export-DbaUser -SqlInstance sqlserver2008 -Database db1,db2 -Path C:\temp\users.sql -ExcludeGoBatchSeparator

        Exports ONLY users from db1 and db2 database on sqlserver2008 server, to the C:\temp\users.sql file without the 'GO' batch separator.


    #>
    [CmdletBinding(DefaultParameterSetName = "Default")]
    [OutputType([String])]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]
        $SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [object[]]$User,
        [ValidateSet('SQLServer2000', 'SQLServer2005', 'SQLServer2008/2008R2', 'SQLServer2012', 'SQLServer2014', 'SQLServer2016', 'SQLServer2017')]
        [string]$DestinationVersion,
        [Alias("OutFile", "FilePath", "FileName")]
        [string]$Path,
        [Alias("NoOverwrite")]
        [switch]$NoClobber,
        [switch]$Append,
        [Alias('Silent')]
        [switch]$EnableException,
        [Microsoft.SqlServer.Management.Smo.ScriptingOptions]$ScriptingOptionsObject = $null,
        [switch]$ExcludeGoBatchSeparator
    )

    begin {
        if ($Path) {
            if ($Path -notlike "*\*") { $Path = ".\$Path" }
            $directory = Split-Path $Path
            $exists = Test-Path $directory

            if ($exists -eq $false) {
                Stop-Function -Message "Parent directory $directory does not exist"
                return
            }
        }

        $outsql = @()

        $versions = @{
            'SQLServer2000'        = 'Version80'
            'SQLServer2005'        = 'Version90'
            'SQLServer2008/2008R2' = 'Version100'
            'SQLServer2012'        = 'Version110'
            'SQLServer2014'        = 'Version120'
            'SQLServer2016'        = 'Version130'
            'SQLServer2017'        = 'Version140'
        }

        $versionName = @{
            'Version80'  = 'SQLServer2000'
            'Version90'  = 'SQLServer2005'
            'Version100' = 'SQLServer2008/2008R2'
            'Version110' = 'SQLServer2012'
            'Version120' = 'SQLServer2014'
            'Version130' = 'SQLServer2016'
            'Version140' = 'SQLServer2017'
        }

    }
    process {
        if (Test-FunctionInterrupt) { return }

        try {
            $server = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential
        } catch {
            Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
        }

        if (!$database) {
            $databases = $server.Databases | Where-Object { $ExcludeDatabase -notcontains $_.Name -and $_.IsAccessible -eq $true }
        } else {
            if ($pipedatabase) {
                $databases = $pipedatabase.name
            } else {
                $databases = $server.Databases | Where-Object { $_.IsAccessible -eq $true -and ($database -contains $_.Name) }
            }
        }

        if ($exclude) {
            $databases = $databases | Where-Object Name -notin $ExcludeDatabase
        }

        if (@($databases).Count -gt 0) {

            #Database Permissions
            foreach ($db in $databases) {
                if ([string]::IsNullOrEmpty($destinationVersion)) {
                    #Get compatibility level for scripting the objects
                    $scriptVersion = $db.CompatibilityLevel
                } else {
                    $scriptVersion = $versions[$destinationVersion]
                }
                $versionNameDesc = $versionName[$scriptVersion.ToString()]

                #If not passed create new ScriptingOption. Otherwise use the one that was passed
                if ($null -eq $ScriptingOptionsObject) {
                    $ScriptingOptionsObject = New-DbaScriptingOption
                    $ScriptingOptionsObject.TargetServerVersion = [Microsoft.SqlServer.Management.Smo.SqlServerVersion]::$scriptVersion
                    $ScriptingOptionsObject.AllowSystemObjects = $false
                    $ScriptingOptionsObject.IncludeDatabaseRoleMemberships = $true
                    $ScriptingOptionsObject.ContinueScriptingOnError = $false
                    $ScriptingOptionsObject.IncludeDatabaseContext = $false
                    $ScriptingOptionsObject.IncludeIfNotExists = $true
                }

                Write-Message -Level Output -Message "Validating users on database $db"

                if ($User.Count -eq 0) {
                    $users = $db.Users | Where-Object { $_.IsSystemObject -eq $false -and $_.Name -notlike "##*" }
                } else {
                    if ($pipedatabase) {
                        $users = $pipedatabase.name
                    } else {
                        $users = $db.Users | Where-Object { $User -contains $_.Name -and $_.IsSystemObject -eq $false -and $_.Name -notlike "##*" }
                    }
                }
                # Store roles between users so if we hit the same one we don't create it again
                $roles = @()
                if ($users.Count -gt 0) {
                    foreach ($dbuser in $users) {
                        Write-Message -Level Output -Message "Generating script for user $dbuser"

                        #setting database
                        $outsql += "USE [" + $db.Name + "]"

                        try {
                            #Fixed Roles #Dependency Issue. Create Role, before add to role.
                            foreach ($rolePermission in ($db.Roles | Where-Object { $_.IsFixedRole -eq $false })) {
                                foreach ($rolePermissionScript in $rolePermission.Script($ScriptingOptionsObject)) {
                                    if ($rolePermission.ToString() -notin $roles) {
                                        $roles += , $rolePermission.ToString()
                                        $outsql += "$($rolePermissionScript.ToString())"
                                    }

                                }
                            }

                            #Database Create User(s) and add to Role(s)
                            foreach ($dbUserPermissionScript in $dbuser.Script($ScriptingOptionsObject)) {
                                if ($dbuserPermissionScript.Contains("sp_addrolemember")) {
                                    $execute = "EXEC "
                                } else {
                                    $execute = ""
                                }
                                $outsql += "$execute$($dbUserPermissionScript.ToString())"
                            }

                            #Database Permissions
                            foreach ($databasePermission in $db.EnumDatabasePermissions() | Where-Object { @("sa", "dbo", "information_schema", "sys") -notcontains $_.Grantee -and $_.Grantee -notlike "##*" -and ($dbuser.Name -contains $_.Grantee) }) {
                                if ($databasePermission.PermissionState -eq "GrantWithGrant") {
                                    $withGrant = " WITH GRANT OPTION"
                                    $grantDatabasePermission = 'GRANT'
                                } else {
                                    $withGrant = " "
                                    $grantDatabasePermission = $databasePermission.PermissionState.ToString().ToUpper()
                                }

                                $outsql += "$($grantDatabasePermission) $($databasePermission.PermissionType) TO [$($databasePermission.Grantee)]$withGrant AS [$($databasePermission.Grantor)];"
                            }

                            #Database Object Permissions
                            # NB: This is a bit of a mess for a couple of reasons
                            # 1. $db.EnumObjectPermissions() doesn't enumerate all object types
                            # 2. Some (x)Collection types can have EnumObjectPermissions() called
                            #    on them directly (e.g. AssemblyCollection); others can't (e.g.
                            #    ApplicationRoleCollection). Those that can't we iterate the
                            #    collection explicitly and add each object's permission.

                            $perms = New-Object System.Collections.ArrayList

                            $null = $perms.AddRange($db.EnumObjectPermissions($dbuser.Name))

                            foreach ($item in $db.ApplicationRoles) {
                                $null = $perms.AddRange($item.EnumObjectPermissions($dbuser.Name))
                            }

                            foreach ($item in $db.Assemblies) {
                                $null = $perms.AddRange($item.EnumObjectPermissions($dbuser.Name))
                            }

                            foreach ($item in $db.Certificates) {
                                $null = $perms.AddRange($item.EnumObjectPermissions($dbuser.Name))
                            }

                            foreach ($item in $db.DatabaseRoles) {
                                $null = $perms.AddRange($item.EnumObjectPermissions($dbuser.Name))
                            }

                            foreach ($item in $db.FullTextCatalogs) {
                                $null = $perms.AddRange($item.EnumObjectPermissions($dbuser.Name))
                            }

                            foreach ($item in $db.FullTextStopLists) {
                                $null = $perms.AddRange($item.EnumObjectPermissions($dbuser.Name))
                            }

                            foreach ($item in $db.SearchPropertyLists) {
                                $null = $perms.AddRange($item.EnumObjectPermissions($dbuser.Name))
                            }

                            foreach ($item in $db.ServiceBroker.MessageTypes) {
                                $null = $perms.AddRange($item.EnumObjectPermissions($dbuser.Name))
                            }

                            foreach ($item in $db.RemoteServiceBindings) {
                                $null = $perms.AddRange($item.EnumObjectPermissions($dbuser.Name))
                            }

                            foreach ($item in $db.ServiceBroker.Routes) {
                                $null = $perms.AddRange($item.EnumObjectPermissions($dbuser.Name))
                            }

                            foreach ($item in $db.ServiceBroker.ServiceContracts) {
                                $null = $perms.AddRange($item.EnumObjectPermissions($dbuser.Name))
                            }

                            foreach ($item in $db.ServiceBroker.Services) {
                                $null = $perms.AddRange($item.EnumObjectPermissions($dbuser.Name))
                            }

                            if ($scriptVersion -ne "Version80") {
                                foreach ($item in $db.AsymmetricKeys) {
                                    $null = $perms.AddRange($item.EnumObjectPermissions($dbuser.Name))
                                }
                            }

                            foreach ($item in $db.SymmetricKeys) {
                                $null = $perms.AddRange($item.EnumObjectPermissions($dbuser.Name))
                            }

                            foreach ($item in $db.XmlSchemaCollections) {
                                $null = $perms.AddRange($item.EnumObjectPermissions($dbuser.Name))
                            }

                            foreach ($objectPermission in $perms | Where-Object { @("sa", "dbo", "information_schema", "sys") -notcontains $_.Grantee -and $_.Grantee -notlike "##*" -and $_.Grantee -eq $dbuser.Name }) {
                                switch ($objectPermission.ObjectClass) {
                                    'ApplicationRole' {
                                        $object = 'APPLICATION ROLE::[{0}]' -f $objectPermission.ObjectName
                                    }
                                    'AsymmetricKey' {
                                        $object = 'ASYMMETRIC KEY::[{0}]' -f $objectPermission.ObjectName
                                    }
                                    'Certificate' {
                                        $object = 'CERTIFICATE::[{0}]' -f $objectPermission.ObjectName
                                    }
                                    'DatabaseRole' {
                                        $object = 'ROLE::[{0}]' -f $objectPermission.ObjectName
                                    }
                                    'FullTextCatalog' {
                                        $object = 'FULLTEXT CATALOG::[{0}]' -f $objectPermission.ObjectName
                                    }
                                    'FullTextStopList' {
                                        $object = 'FULLTEXT STOPLIST::[{0}]' -f $objectPermission.ObjectName
                                    }
                                    'MessageType' {
                                        $object = 'Message Type::[{0}]' -f $objectPermission.ObjectName
                                    }
                                    'ObjectOrColumn' {
                                        if ($scriptVersion -ne "Version80") {
                                            $object = 'OBJECT::[{0}].[{1}]' -f $objectPermission.ObjectSchema, $objectPermission.ObjectName
                                            if ($null -ne $objectPermission.ColumnName) {
                                                $object += '([{0}])' -f $objectPermission.ColumnName
                                            }
                                        }
                                        #At SQL Server 2000 OBJECT did not exists
                                        else {
                                            $object = '[{0}].[{1}]' -f $objectPermission.ObjectSchema, $objectPermission.ObjectName
                                        }
                                    }
                                    'RemoteServiceBinding' {
                                        $object = 'REMOTE SERVICE BINDING::[{0}]' -f $objectPermission.ObjectName
                                    }
                                    'Schema' {
                                        $object = 'SCHEMA::[{0}]' -f $objectPermission.ObjectName
                                    }
                                    'SearchPropertyList' {
                                        $object = 'SEARCH PROPERTY LIST::[{0}]' -f $objectPermission.ObjectName
                                    }
                                    'Service' {
                                        $object = 'SERVICE::[{0}]' -f $objectPermission.ObjectName
                                    }
                                    'ServiceContract' {
                                        $object = 'CONTRACT::[{0}]' -f $objectPermission.ObjectName
                                    }
                                    'ServiceRoute' {
                                        $object = 'ROUTE::[{0}]' -f $objectPermission.ObjectName
                                    }
                                    'SqlAssembly' {
                                        $object = 'ASSEMBLY::[{0}]' -f $objectPermission.ObjectName
                                    }
                                    'SymmetricKey' {
                                        $object = 'SYMMETRIC KEY::[{0}]' -f $objectPermission.ObjectName
                                    }
                                    'User' {
                                        $object = 'USER::[{0}]' -f $objectPermission.ObjectName
                                    }
                                    'UserDefinedType' {
                                        $object = 'TYPE::[{0}].[{1}]' -f $objectPermission.ObjectSchema, $objectPermission.ObjectName
                                    }
                                    'XmlNamespace' {
                                        $object = 'XML SCHEMA COLLECTION::[{0}]' -f $objectPermission.ObjectName
                                    }
                                }

                                if ($objectPermission.PermissionState -eq "GrantWithGrant") {
                                    $withGrant = " WITH GRANT OPTION"
                                    $grantObjectPermission = 'GRANT'
                                } else {
                                    $withGrant = " "
                                    $grantObjectPermission = $objectPermission.PermissionState.ToString().ToUpper()
                                }

                                $outsql += "$grantObjectPermission $($objectPermission.PermissionType) ON $object TO [$($objectPermission.Grantee)]$withGrant AS [$($objectPermission.Grantor)];"
                            }

                        } catch {
                            Stop-Function -Message "This user may be using functionality from $($versionName[$db.CompatibilityLevel.ToString()]) that does not exist on the destination version ($versionNameDesc)." -Continue -InnerErrorRecord $_ -Target $db
                        }
                    }
                } else {
                    Write-Message -Level Output -Message "No users found on database '$db'"
                }

                #reset collection
                $users = $null
            }
        } else {
            Write-Message -Level Output -Message "No users found on instance '$server'"
        }
    }

    end {
        if (Test-FunctionInterrupt) { return }

        if ($ExcludeGoBatchSeparator) {
            $sql = $outsql
        } else {
            $sql = $outsql -join "`r`nGO`r`n"
            #add the final GO
            $sql += "`r`nGO"
        }

        if ($Path) {
            $sql | Out-File -Encoding UTF8 -FilePath $Path -Append:$Append -NoClobber:$NoClobber
        } else {
            $sql
        }
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Export-SqlUser
    }
}

tools\dbatools\functions\Export-DbaXECsv.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Export-DbaXECsv {
    <#
    .SYNOPSIS
        Exports Extended Events to a CSV file.

    .DESCRIPTION
        Exports Extended Events to a CSV file.

    .PARAMETER Path
        Specifies the InputObject to the output CSV file

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER InputObject
        Allows Piping

    .NOTES
        Tags: ExtendedEvent, XE, XEvent
        Author: Gianluca Sartori (@spaghettidba)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Export-DbaXECsv

    .EXAMPLE
        PS C:\> Get-ChildItem -Path C:\temp\sample.xel | Export-DbaXECsv -Path c:\temp\sample.csv

        Writes Extended Events data to the file "C:\temp\events.csv".

    .EXAMPLE
        PS C:\> Get-DbaXESession -SqlInstance sql2014 -Session deadlocks | Export-DbaXECsv -Path c:\temp\events.csv

        Writes Extended Events data to the file "C:\temp\events.csv".

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias('FullName')]
        [object[]]$InputObject,
        [parameter(Mandatory)]
        [string]$Path,
        [switch]$EnableException
    )
    begin {
        try {
            Add-Type -Path "$script:PSModuleRoot\bin\XESmartTarget\XESmartTarget.Core.dll" -ErrorAction Stop
        } catch {
            Stop-Function -Message "Could not load XESmartTarget.Core.dll" -ErrorRecord $_ -Target "XESmartTarget"
            return
        }

        function Get-FileFromXE ($InputObject) {
            if ($InputObject.TargetFile) {
                if ($InputObject.TargetFile.Length -eq 0) {
                    Stop-Function -Message "This session does not have an associated Target File."
                    return
                }

                $instance = [dbainstance]$InputObject.ComputerName

                if ($instance.IsLocalHost) {
                    $xelpath = $InputObject.TargetFile
                } else {
                    $xelpath = $InputObject.RemoteTargetFile
                }

                if ($xelpath -notmatch ".xel") {
                    $xelpath = "$xelpath*.xel"
                }

                try {
                    Get-ChildItem -Path $xelpath -ErrorAction Stop
                } catch {
                    Stop-Function -Message "Failure" -ErrorRecord $_
                }
            }
        }
    }
    process {
        if (Test-FunctionInterrupt) { return }

        $getfiles = Get-FileFromXE $InputObject

        if ($getfiles) {
            $InputObject += $getfiles
        }

        foreach ($file in $InputObject) {
            if ($file -is [System.String]) {
                $currentfile = $file
            } elseif ($file -is [System.IO.FileInfo]) {
                $currentfile = $file.FullName
            } elseif ($file -is [Microsoft.SqlServer.Management.XEvent.Session]) {
                # it was taken care of above
                continue
            } else {
                Stop-Function -Message "Unsupported file type."
                return
            }

            $accessible = Test-Path -Path $currentfile
            $whoami = whoami

            if (-not $accessible) {
                if ($file.Status -eq "Stopped") { continue }
                Stop-Function -Continue -Message "$currentfile cannot be accessed from $($env:COMPUTERNAME). Does $whoami have access?"
            }

            if (-not (Test-Path $Path)) {
                if ([String]::IsNullOrEmpty([IO.Path]::GetExtension($Path))) {
                    New-Item $Path -ItemType directory | Out-Null
                    $outDir = $Path
                    $outFile = [IO.Path]::GetFileNameWithoutExtension($currentfile) + ".csv"
                } else {
                    $outDir = [IO.Path]::GetDirectoryName($Path)
                    $outFile = [IO.Path]::GetFileName($Path)
                }
            } else {
                if ((Get-Item $Path) -is [System.IO.DirectoryInfo]) {
                    $outDir = $Path
                    $outFile = [IO.Path]::GetFileNameWithoutExtension($currentfile) + ".csv"
                } else {
                    $outDir = [IO.Path]::GetDirectoryName($Path)
                    $outFile = [IO.Path]::GetFileName($Path)
                }
            }

            $adapter = New-Object XESmartTarget.Core.Utils.XELFileCSVAdapter
            $adapter.InputFile = $currentfile
            $adapter.OutputFile = (Join-Path $outDir $outFile)

            try {
                $adapter.Convert()
                $file = Get-ChildItem -Path $adapter.OutputFile

                if ($file.Length -eq 0) {
                    Remove-Item -Path $adapter.OutputFile
                } else {
                    $file
                }
            } catch {
                Stop-Function -Message "Failure" -ErrorRecord $_ -Target "XESmartTarget" -Continue
            }
        }
    }
}

tools\dbatools\functions\Export-DbaXESessionTemplate.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Export-DbaXESessionTemplate {
    <#
    .SYNOPSIS
        Exports an XESession XML Template using XE Session(s) output by Get-DbaXESession

    .DESCRIPTION
        Exports an XESession XML Template either from the Target SQL Server or XE Session(s) output by Get-DbaXESession. Exports to "$home\Documents\SQL Server Management Studio\Templates\XEventTemplates" by default

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2008 or higher.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Session
        The Name of the session(s) to export.

    .PARAMETER Path
        The path to export the file into. Can be .xml or directory.

    .PARAMETER InputObject
        Specifies an XE Session output by Get-DbaXESession.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: ExtendedEvent, XE, XEvent
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Export-DbaXESessionTemplate

    .EXAMPLE
        PS C:\> Export-DbaXESessionTemplate -SqlInstance sql2017 -Path C:\temp\xe

        Exports an XESession XML Template for all Extended Event Sessions on sql2017 to the C:\temp\xe folder.

    .EXAMPLE
        PS C:\> Get-DbaXESession -SqlInstance sql2017 -Session system_health | Export-DbaXESessionTemplate -Path C:\temp\xe

        Gets the system_health Extended Events Session from sql2017 and then exports as an XESession XML Template to C:\temp\xe

    #>
    [CmdletBinding()]
    param (
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [object[]]$Session,
        [string]$Path = "$home\Documents\SQL Server Management Studio\Templates\XEventTemplates",
        [Parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.XEvent.Session[]]$InputObject,
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $InputObject += Get-DbaXESession -SqlInstance $instance -SqlCredential $SqlCredential -Session $Session -EnableException
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }
        }

        foreach ($xes in $InputObject) {
            $xesname = Remove-InvalidFileNameChars -Name $xes.Name

            if (-not (Test-Path -Path $Path)) {
                Stop-Function -Message "$Path does not exist." -Target $Path
            }

            if ($path.EndsWith(".xml")) {
                $filename = $path
            } else {
                $filename = "$path\$xesname.xml"
            }
            Write-Message -Level Verbose -Message "Wrote $xesname to $filename"
            [Microsoft.SqlServer.Management.XEvent.XEStore]::SaveSessionToTemplate($xes, $filename, $true)
            Get-ChildItem -Path $filename
        }
    }
}

tools\dbatools\functions\Get-DbaAgentAlert.ps1

function Get-DbaAgentAlert {
    <#
    .SYNOPSIS
        Returns all SQL Agent alerts on a SQL Server Agent.

    .DESCRIPTION
        This function returns SQL Agent alerts.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Agent, SMO
        Author: Klaas Vandenberghe (@PowerDBAKlaas)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaAgentAlert

    .EXAMPLE
        PS C:\> Get-DbaAgentAlert -SqlInstance ServerA,ServerB\instanceB

        Returns all SQL Agent alerts on serverA and serverB\instanceB

    .EXAMPLE
        PS C:\> 'serverA','serverB\instanceB' | Get-DbaAgentAlert

        Returns all SQL Agent alerts  on serverA and serverB\instanceB

    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "Instance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]
        $SqlCredential,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            Write-Message -Level Verbose -Message "Getting Edition from $server"
            Write-Message -Level Verbose -Message "$server is a $($server.Edition)"

            if ($server.Edition -like 'Express*') {
                Stop-Function -Message "There is no SQL Agent on $server, it's a $($server.Edition)" -Continue
            }

            $defaults = "ComputerName", "SqlInstance", "InstanceName", "Name", "ID", "JobName", "AlertType", "CategoryName", "Severity", "IsEnabled", "DelayBetweenResponses", "LastRaised", "OccurrenceCount"

            $alerts = $server.Jobserver.Alerts

            foreach ($alert in $alerts) {
                $lastraised = [dbadatetime]$alert.LastOccurrenceDate

                Add-Member -Force -InputObject $alert -MemberType NoteProperty -Name ComputerName -value $server.ComputerName
                Add-Member -Force -InputObject $alert -MemberType NoteProperty -Name InstanceName -value $server.ServiceName
                Add-Member -Force -InputObject $alert -MemberType NoteProperty -Name SqlInstance -value $server.DomainInstanceName
                Add-Member -Force -InputObject $alert -MemberType NoteProperty Notifications -value $alert.EnumNotifications()
                Add-Member -Force -InputObject $alert -MemberType NoteProperty LastRaised -value $lastraised

                Select-DefaultView -InputObject $alert -Property $defaults
            }
        }
    }
}

tools\dbatools\functions\Get-DbaAgentJob.ps1

#ValidationTags#Messaging#
function Get-DbaAgentJob {
    <#
    .SYNOPSIS
        Gets SQL Agent Job information for each instance(s) of SQL Server.

    .DESCRIPTION
        The Get-DbaAgentJob returns connected SMO object for SQL Agent Job information for each instance(s) of SQL Server.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Job
        The job(s) to process - this list is auto-populated from the server. If unspecified, all jobs will be processed.

    .PARAMETER ExcludeJob
        The job(s) to exclude - this list is auto-populated from the server.

    .PARAMETER ExcludeDisabledJobs
        Switch will exclude disabled jobs from the output.

    .PARAMETER Database
        Return jobs with T-SQL job steps associated with specific databases
    
    .PARAMETER Category
        Return jobs associated with specific category
    
    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Job, Agent
        Author: Garry Bargsley (@gbargsley), http://blog.garrybargsley.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaAgentJob

    .EXAMPLE
        PS C:\> Get-DbaAgentJob -SqlInstance localhost

        Returns all SQL Agent Jobs on the local default SQL Server instance

    .EXAMPLE
        PS C:\> Get-DbaAgentJob -SqlInstance localhost, sql2016

        Returns all SQl Agent Jobs for the local and sql2016 SQL Server instances

    .EXAMPLE
        PS C:\> Get-DbaAgentJob -SqlInstance localhost -Job BackupData, BackupDiff

        Returns all SQL Agent Jobs named BackupData and BackupDiff from the local SQL Server instance.

    .EXAMPLE
        PS C:\> Get-DbaAgentJob -SqlInstance localhost -ExcludeJob BackupDiff

        Returns all SQl Agent Jobs for the local SQL Server instances, except the BackupDiff Job.

    .EXAMPLE
        PS C:\> Get-DbaAgentJob -SqlInstance localhost -ExcludeDisabledJobs

        Returns all SQl Agent Jobs for the local SQL Server instances, excluding the disabled jobs.

    .EXAMPLE
        PS C:\> $servers | Get-DbaAgentJob | Out-GridView -PassThru | Start-DbaAgentJob -WhatIf

        Find all of your Jobs from SQL Server instances in the $servers collection, select the jobs you want to start then see jobs would start if you ran Start-DbaAgentJob
    .EXAMPLE
       PS C:\> Get-DbaAgentJob -SqlInstance sqlserver2014a | Where-Object Category -eq "Report Server" | Export-DbaScript -Path "C:\temp\sqlserver2014a_SSRSJobs.sql"
        
        Exports all SSRS jobs from SQL instance sqlserver2014a to a file.
    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$Job,
        [string[]]$ExcludeJob,
        [string[]]$Database,
        [string[]]$Category,
        [switch]$ExcludeDisabledJobs,
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $jobs = $server.JobServer.Jobs

            if ($Job) {
                $jobs = $jobs | Where-Object Name -In $Job
            }
            if ($ExcludeJob) {
                $jobs = $jobs | Where-Object Name -NotIn $ExcludeJob
            }
            if ($ExcludeDisabledJobs) {
                $jobs = $Jobs | Where-Object IsEnabled -eq $true
            }
            if ($Database) {
                $jobs = $jobs | Where-Object {
                    $_.JobSteps.DatabaseName -in $Database
                }
            }
            if ($Category) {
                $jobs = $jobs | Where-Object Category -in $Category
            }
            
            foreach ($agentJob in $jobs) {
                Add-Member -Force -InputObject $agentJob -MemberType NoteProperty -Name ComputerName -value $agentJob.Parent.Parent.ComputerName
                Add-Member -Force -InputObject $agentJob -MemberType NoteProperty -Name InstanceName -value $agentJob.Parent.Parent.ServiceName
                Add-Member -Force -InputObject $agentJob -MemberType NoteProperty -Name SqlInstance -value $agentJob.Parent.Parent.DomainInstanceName

                Select-DefaultView -InputObject $agentJob -Property ComputerName, InstanceName, SqlInstance, Name, Category, OwnerLoginName, CurrentRunStatus, CurrentRunRetryAttempt, 'IsEnabled as Enabled', LastRunDate, LastRunOutcome, HasSchedule, OperatorToEmail, 'DateCreated as CreateDate'
            }
        }
    }
}

tools\dbatools\functions\Get-DbaAgDatabase.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaAgDatabase {
    <#
    .SYNOPSIS
        Gets availability group databases from a SQL Server instance.

    .DESCRIPTION
        Gets availability group databases from a SQL Server instance.

        Default view provides most common set of properties for information on the database in an availability group.

        Information returned on the database will be specific to that replica, whether it is primary or a secondary.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. Server version must be SQL Server version 2012 or higher.

    .PARAMETER SqlCredential
        Login to the SqlInstance instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER AvailabilityGroup
        Specify the availability groups to query.

    .PARAMETER Database
        Specify the database or databases to return. This list is auto-populated from the server for tab completion. Multiple databases can be specified. If none are specified all databases will be processed.

    .PARAMETER InputObject
        Enables piped input from Get-DbaAvailabilityGroup.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Hadr, HA, AG, AvailabilityGroup, Replica
        Author: Shawn Melton (@wsmelton), https://wsmelton.github.io

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaAgDatabase

    .EXAMPLE
        PS C:\> Get-DbaAgDatabase -SqlInstance sql2017a

        Returns all the databases in each availability group found on sql2017a

    .EXAMPLE
        PS C:\> Get-DbaAgDatabase -SqlInstance sql2017a -AvailabilityGroup AG101

        Returns all the databases in the availability group AG101 on sql2017a

    .EXAMPLE
        PS C:\> Get-DbaAvailabilityGroup -SqlInstance sqlcluster -AvailabilityGroup SharePoint -Database Sharepoint_Config | Get-DbaAgDatabase

        Returns the database Sharepoint_Config found in the availability group SharePoint on server sqlcluster

    #>
    [CmdletBinding()]
    param (
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$AvailabilityGroup,
        [string[]]$Database,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.AvailabilityGroup[]]$InputObject,
        [switch]$EnableException
    )
    process {
        if ($SqlInstance) {
            $InputObject += Get-DbaAvailabilityGroup -SqlInstance $SqlInstance -SqlCredential $SqlCredential -AvailabilityGroup $AvailabilityGroup
        }

        foreach ($db in $InputObject.AvailabilityDatabases) {
            if ($Database) {
                if ($db.Name -notin $Database) { continue }
            }
            $server = $db.Parent.Parent
            Add-Member -Force -InputObject $db -MemberType NoteProperty -Name ComputerName -value $server.ComputerName
            Add-Member -Force -InputObject $db -MemberType NoteProperty -Name InstanceName -value $server.ServiceName
            Add-Member -Force -InputObject $db -MemberType NoteProperty -Name SqlInstance -value $server.DomainInstanceName
            Add-Member -Force -InputObject $db -MemberType NoteProperty -Name Replica -value $server.ComputerName
            Add-Member -Force -InputObject $db -MemberType NoteProperty -Name DatabaseName -value $db.Name # for backwards compat
            Add-Member -Force -InputObject $db -MemberType NoteProperty -Name AvailabilityGroup -value $db.Parent.Name

            $defaults = 'ComputerName', 'InstanceName', 'SqlInstance', 'AvailabilityGroup', 'Replica', 'Name', 'SynchronizationState', 'IsFailoverReady', 'IsJoined', 'IsSuspended'
            Select-DefaultView -InputObject $db -Property $defaults
        }
    }
}

tools\dbatools\functions\Get-DbaAgentSchedule.ps1

function Get-DbaAgentSchedule {
    <#
    .SYNOPSIS
        Returns all SQL Agent Shared Schedules on a SQL Server Agent.

    .DESCRIPTION
        This function returns SQL Agent Shared Schedules.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Schedule
        Parameter to filter the schedules returned

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Agent, Schedule
        Author: Chris McKeown (@devopsfu), http://www.devopsfu.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaAgentSchedule

    .EXAMPLE
        PS C:\> Get-DbaAgentSchedule -SqlInstance localhost

        Returns all SQL Agent Shared Schedules on the local default SQL Server instance

    .EXAMPLE
        PS C:\> Get-DbaAgentSchedule -SqlInstance localhost, sql2016

        Returns all SQL Agent Shared Schedules for the local and sql2016 SQL Server instances

    .EXAMPLE
        PS C:\> Get-DbaAgentSchedule -SqlInstance sql2016 -Schedule "Maintenance10min","Maintenance60min"

        Returns the "Maintenance10min" & "Maintenance60min" schedules from the sql2016 SQL Server instance
    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "Instance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Schedules")]
        [object[]]$Schedule,
        [PSCredential]$SqlCredential,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        function Get-ScheduleDescription {
            param (
                [Parameter(Mandatory)]
                [ValidateNotNullOrEmpty()]
                [object]$Schedule

            )

            # Get the culture to make sure the right date and time format is displayed
            $datetimeFormat = (Get-culture).DateTimeFormat

            # Set the intial description
            $description = ""

            # Get the date and time values
            $startDate = Get-Date $Schedule.ActiveStartDate -format $datetimeFormat.ShortDatePattern
            $startTime = Get-Date ($Schedule.ActiveStartTimeOfDay.ToString()) -format $datetimeFormat.LongTimePattern
            $endDate = Get-Date $Schedule.ActiveEndDate -format $datetimeFormat.ShortDatePattern
            $endTime = Get-Date ($Schedule.ActiveEndTimeOfDay.ToString()) -format $datetimeFormat.LongTimePattern

            # Start setting the description based on the frequency type
            switch ($schedule.FrequencyTypes) {
                {($_ -eq 1) -or ($_ -eq "Once")} { $description += "Occurs on $startDate at $startTime" }
                {($_ -in 4, 8, 16, 32) -or ($_ -in "Daily", "Weekly", "Monthly")} { $description += "Occurs every "}
                {($_ -eq 64) -or ($_ -eq "AutoStart")} {$description += "Start automatically when SQL Server Agent starts "}
                {($_ -eq 128) -or ($_ -eq "OnIdle")} {$description += "Start whenever the CPUs become idle"}
            }

            # Check the frequency types for daily or weekly i.e.
            switch ($schedule.FrequencyTypes) {
                # Daily
                {$_ -in 4, "Daily"} {
                    if ($Schedule.FrequencyInterval -eq 1) {
                        $description += "day "
                    } elseif ($Schedule.FrequencyInterval -gt 1) {
                        $description += "$($Schedule.FrequencyInterval) day(s) "
                    }
                }

                # Weekly
                {$_ -in 8, "Weekly"} {
                    # Check if it's for one or more weeks
                    if ($Schedule.FrequencyRecurrenceFactor -eq 1) {
                        $description += "week on "
                    } elseif ($Schedule.FrequencyRecurrenceFactor -gt 1) {
                        $description += "$($Schedule.FrequencyRecurrenceFactor) week(s) on "
                    }

                    # Save the interval for the loop
                    $frequencyInterval = $Schedule.FrequencyInterval

                    # Create the array to hold the days
                    $days = ($false, $false, $false, $false, $false, $false, $false)

                    # Loop through the days
                    while ($frequencyInterval -gt 0) {

                        switch ($FrequenctInterval) {
                            {($frequencyInterval - 64) -ge 0} {
                                $days[5] = "Saturday"
                                $frequencyInterval -= 64
                            }
                            {($frequencyInterval - 32) -ge 0} {
                                $days[4] = "Friday"
                                $frequencyInterval -= 32
                            }
                            {($frequencyInterval - 16) -ge 0} {
                                $days[3] = "Thursday"
                                $frequencyInterval -= 16
                            }
                            {($frequencyInterval - 8) -ge 0} {
                                $days[2] = "Wednesday"
                                $frequencyInterval -= 8
                            }
                            {($frequencyInterval - 4) -ge 0} {
                                $days[1] = "Tuesday"
                                $frequencyInterval -= 4
                            }
                            {($frequencyInterval - 2) -ge 0} {
                                $days[0] = "Monday"
                                $frequencyInterval -= 2
                            }
                            {($frequencyInterval - 1) -ge 0} {
                                $days[6] = "Sunday"
                                $frequencyInterval -= 1
                            }
                        }

                    }

                    # Add the days to the description by selecting the days and exploding the array
                    $description += ($days | Where-Object {$_ -ne $false}) -join ", "
                    $description += " "

                }

                # Monthly
                {$_ -in 16, "Monthly"} {
                    # Check if it's for one or more months
                    if ($Schedule.FrequencyRecurrenceFactor -eq 1) {
                        $description += "month "
                    } elseif ($Schedule.FrequencyRecurrenceFactor -gt 1) {
                        $description += "$($Schedule.FrequencyRecurrenceFactor) month(s) "
                    }

                    # Add the interval
                    $description += "on day $($Schedule.FrequencyInterval) of that month "
                }

                # Monthly relative
                {$_ -in 32, "MonthlyRelative"} {
                    # Check for the relative day
                    switch ($Schedule.FrequencyRelativeIntervals) {
                        {$_ -in 1, "First"} {$description += "first "}
                        {$_ -in 2, "Second"} {$description += "second "}
                        {$_ -in 4, "Third"} {$description += "third "}
                        {$_ -in 8, "Fourth"} {$description += "fourth "}
                        {$_ -in 16, "Last"} {$description += "last "}
                    }

                    # Get the relative day of the week
                    switch ($Schedule.FrequencyInterval) {
                        1 { $description += "Sunday "}
                        2 { $description += "Monday "}
                        3 { $description += "Tuesday "}
                        4 { $description += "Wednesday "}
                        5 { $description += "Thursday "}
                        6 { $description += "Friday "}
                        7 { $description += "Saturday "}
                        8 { $description += "Day "}
                        9 { $description += "Weekday "}
                        10 { $description += "Weekend day "}
                    }

                    $description += "of every $($Schedule.FrequencyRecurrenceFactor) month(s) "

                }
            }

            # Check the frequency type
            if ($schedule.FrequencyTypes -notin 64, 128) {

                # Check the subday types for minutes or hours i.e.
                if ($schedule.FrequencySubDayInterval -in 0, 1) {
                    $description += "at $startTime. "
                } else {

                    switch ($Schedule.FrequencySubDayTypes) {
                        {$_ -in 2, "Seconds"} { $description += "every $($schedule.FrequencySubDayInterval) second(s) "}
                        {$_ -in 4, "Minutes"} {$description += "every $($schedule.FrequencySubDayInterval) minute(s) " }
                        {$_ -in 8, "Hours"} { $description += "every $($schedule.FrequencySubDayInterval) hour(s) " }
                    }

                    $description += "between $startTime and $endTime. "
                }

                # Check if an end date has been given
                if ($Schedule.ActiveEndDate.Year -eq 9999) {
                    $description += "Schedule will be used starting on $startDate."
                } else {
                    $description += "Schedule will used between $startDate and $endDate."
                }
            }

            return $description
        }
    }

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            if ($server.Edition -like 'Express*') {
                Stop-Function -Message "$($server.Edition) does not support SQL Server Agent. Skipping $server." -Continue
            }

            if ($Schedule) {
                $scheduleCollection = $server.JobServer.SharedSchedules | Where-Object { $_.Name -in $Schedule }
            } else {
                $scheduleCollection = $server.JobServer.SharedSchedules
            }

        }

        $defaults = "ComputerName", "InstanceName", "SqlInstance", "Name as ScheduleName", "ActiveEndDate", "ActiveEndTimeOfDay", "ActiveStartDate", "ActiveStartTimeOfDay", "DateCreated", "FrequencyInterval", "FrequencyRecurrenceFactor", "FrequencyRelativeIntervals", "FrequencySubDayInterval", "FrequencySubDayTypes", "FrequencyTypes", "IsEnabled", "JobCount", "Description"

        foreach ($schedule in $scheduleCollection) {
            $description = Get-ScheduleDescription -Schedule $schedule

            Add-Member -Force -InputObject $schedule -MemberType NoteProperty ComputerName -value $server.ComputerName
            Add-Member -Force -InputObject $schedule -MemberType NoteProperty InstanceName -value $server.ServiceName
            Add-Member -Force -InputObject $schedule -MemberType NoteProperty SqlInstance -value $server.DomainInstanceName
            Add-Member -Force -InputObject $schedule -MemberType NoteProperty Description -Value $description

            Select-DefaultView -InputObject $schedule -Property $defaults
        }

    }
}

tools\dbatools\functions\Format-DbaBackupInformation.ps1

function Format-DbaBackupInformation {
    <#
    .SYNOPSIS
        Transforms the data in a dbatools BackupHistory object for a restore

    .DESCRIPTION
        Performs various mapping on Backup History, ready restoring
        Options include changing restore paths, backup paths, database name and many others

    .PARAMETER BackupHistory
        A dbatools backupHistory object, normally this will have been created using Select-DbaBackupInformation

    .PARAMETER ReplaceDatabaseName
        If a single value is provided, this will be replaced do all occurrences a database name
        If a Hashtable is passed in, each database name mention will be replaced as specified. If a database's name does not appear it will not be replace
        DatabaseName will also be replaced where it  occurs in the file paths of data and log files.
        Please note, that this won't change the Logical Names of data files, that has to be done with a separate Alter DB call

    .PARAMETER DatabaseNamePrefix
        This string will be prefixed to all restored database's name

    .PARAMETER DataFileDirectory
        This will move ALL restored files to this location during the restore

    .PARAMETER LogFileDirectory
        This will move all log files to this location, overriding DataFileDirectory

    .PARAMETER DestinationFileStreamDirectory
        This move the FileStream folder and contents to the new location, overriding DataFileDirectory

    .PARAMETER FileNamePrefix
        This string will  be prefixed to all restored files (Data and Log)

    .PARAMETER RebaseBackupFolder
        Use this to rebase where your backups are stored.

    .PARAMETER Continue
        Indicates that this is a continuing restore

    .PARAMETER DatabaseFilePrefix
        A string that will be prefixed to every file restored

    .PARAMETER DatabaseFileSuffix
        A string that will be suffixed to every file restored

    .PARAMETER ReplaceDbNameInFile
        If set, will replace the old database name with the new name if it occurs in the file name

    .PARAMETER FileMapping
        A hashtable that can be used to move specific files to a location.
        `$FileMapping = @{'DataFile1'='c:\restoredfiles\Datafile1.mdf';'DataFile3'='d:\DataFile3.mdf'}`
        And files not specified in the mapping will be restored to their original location
        This Parameter is exclusive with DestinationDataDirectory
        If specified, this will override any other file renaming/relocation options.

    .PARAMETER PathSep
        By default is Windows's style (`\`) but you can pass also, e.g., `/` for Unix's style paths

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: DisasterRecovery, Backup, Restore
        Author: Stuart Moore (@napalmgram), stuart-moore.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Format-DbaBackupInformation

    .EXAMPLE
        PS C:\> $History | Format-DbaBackupInformation -ReplaceDatabaseName NewDb

        Changes as database name references to NewDb, both in the database name and any restore paths. Note, this will fail if the BackupHistory object contains backups for more than 1 database

    .EXAMPLE
        PS C:\> $History | Format-DbaBackupInformation -ReplaceDatabaseName @{'OldB'='NewDb';'ProdHr'='DevHr'}

        Will change all occurrences of original database name in the backup history (names and restore paths) using the mapping in the hashtable.
        In this example any occurrence of OldDb will be replaced with NewDb and ProdHr with DevPR

    .EXAMPLE
        PS C:\> $History | Format-DbaBackupInformation -DataFileDirectory 'D:\DataFiles\' -LogFileDirectory 'E:\LogFiles\

        This example with change the restore path for all data files (everything that is not a log file) to d:\datafiles
        And all Transaction Log files will be restored to E:\Logfiles

    .EXAMPLE
        PS C:\> $History | Format-DbaBackupInformation -RebaseBackupFolder f:\backups

        This example changes the location that SQL Server will look for the backups. This is useful if you've moved the backups to a different location

       #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [object[]]$BackupHistory,
        [object]$ReplaceDatabaseName,
        [switch]$ReplaceDbNameInFile,
        [string]$DataFileDirectory,
        [string]$LogFileDirectory,
        [string]$DestinationFileStreamDirectory,
        [string]$DatabaseNamePrefix,
        [string]$DatabaseFilePrefix,
        [string]$DatabaseFileSuffix,
        [string]$RebaseBackupFolder,
        [switch]$Continue,
        [hashtable]$FileMapping,
        [string]$PathSep = '\',
        [switch]$EnableException
    )
    begin {

        Write-Message -Message "Starting" -Level Verbose
        if ($null -ne $ReplaceDatabaseName) {
            if ($ReplaceDatabaseName -is [string] -or $ReplaceDatabaseName.ToString() -ne 'System.Collections.Hashtable') {
                Write-Message -Message "String passed in for DB rename" -Level Verbose
                $ReplaceDatabaseNameType = 'single'
            } elseif ($ReplaceDatabaseName -is [HashTable] -or $ReplaceDatabaseName.ToString() -eq 'System.Collections.Hashtable' ) {
                Write-Message -Message "Hashtable passed in for DB rename" -Level Verbose
                $ReplaceDatabaseNameType = 'multi'
            } else {
                Write-Message -Message "ReplacemenDatabaseName is $($ReplaceDatabaseName.Gettype().ToString()) - $ReplaceDatabaseName" -level Verbose
            }
        }
        if ((Test-Bound -Parameter DataFileDirectory) -and $DataFileDirectory.EndsWith($PathSep)) {
            $DataFileDirectory = $DataFileDirectory -Replace '.$'
        }
        if ((Test-Bound -Parameter DestinationFileStreamDirectory) -and $DestinationFileStreamDirectory.EndsWith($PathSep) ) {
            $DestinationFileStreamDirectory = $DestinationFileStreamDirectory -Replace '.$'
        }
        if ((Test-Bound -Parameter LogFileDirectory) -and $LogFileDirectory.EndsWith($PathSep) ) {
            $LogFileDirectory = $LogFileDirectory -Replace '.$'
        }
        if ((Test-Bound -Parameter RebaseBackupFolder) -and $RebaseBackupFolder.EndsWith($PathSep) ) {
            $RebaseBackupFolder = $RebaseBackupFolder -Replace '.$'
        }
    }


    process {

        foreach ($History in $BackupHistory) {
            if ("OriginalDatabase" -notin $History.PSobject.Properties.name) {
                $History | Add-Member -Name 'OriginalDatabase' -Type NoteProperty -Value $History.Database
            }
            if ("OriginalFileList" -notin $History.PSobject.Properties.name) {
                $History | Add-Member -Name 'OriginalFileList' -Type NoteProperty -Value ''
                $History | ForEach-Object {$_.OriginalFileList = $_.FileList}
            }
            if ("OriginalFullName" -notin $History.PSobject.Properties.name) {
                $History | Add-Member -Name 'OriginalFullName' -Type NoteProperty -Value $History.FullName
            }
            if ("IsVerified" -notin $History.PSobject.Properties.name) {
                $History | Add-Member -Name 'IsVerified' -Type NoteProperty -Value $False
            }
            switch ($History.Type) {
                'Full' {$History.Type = 'Database'}
                'Differential' {$History.Type = 'Database Differential'}
                'Log' {$History.Type = 'Transaction Log'}
            }


            if ($ReplaceDatabaseNameType -eq 'single' -and $ReplaceDatabaseName -ne '' ) {
                $History.Database = $ReplaceDatabaseName
                Write-Message -Message "New DbName (String) = $($History.Database)" -Level Verbose
            } elseif ($ReplaceDatabaseNameType -eq 'multi') {
                if ($null -ne $ReplaceDatabaseName[$History.Database]) {
                    $History.Database = $ReplaceDatabaseName[$History.Database]
                    Write-Message -Message "New DbName (Hash) = $($History.Database)" -Level Verbose
                }
            }
            $History.Database = $DatabaseNamePrefix + $History.Database
            if ($true -ne $Continue) {
                $History.FileList | ForEach-Object {
                    if ($null -ne $FileMapping ) {
                        if ($null -ne $FileMapping[$_.LogicalName]) {
                            $_.PhysicalName = $FileMapping[$_.LogicalName]
                        }
                    } else {
                        if ($ReplaceDbNameInFile -eq $true) {
                            $_.PhysicalName = $_.PhysicalName -Replace $History.OriginalDatabase, $History.Database
                        }
                        Write-Message -Message " 1 PhysicalName = $($_.PhysicalName) " -Level Verbose
                        $Pname = [System.Io.FileInfo]$_.PhysicalName
                        $RestoreDir = $Pname.DirectoryName
                        if ($_.Type -eq 'D' -or $_.FileType -eq 'D') {
                            if ('' -ne $DataFileDirectory) {
                                $RestoreDir = $DataFileDirectory
                            }
                        } elseif ($_.Type -eq 'L' -or $_.FileType -eq 'L') {
                            if ('' -ne $LogFileDirectory) {
                                $RestoreDir = $LogFileDirectory
                            } elseif ('' -ne $DataFileDirectory) {
                                $RestoreDir = $DataFileDirectory
                            }
                        } elseif ($_.Type -eq 'S' -or $_.FileType -eq 'S') {
                            if ('' -ne $DestinationFileStreamDirectory) {
                                $RestoreDir = $DestinationFileStreamDirectory
                            } elseif ('' -ne $DataFileDirectory) {
                                $RestoreDir = $DataFileDirectory
                            }
                        }

                        $_.PhysicalName = $RestoreDir + $PathSep + $DatabaseFilePrefix + $Pname.BaseName + $DatabaseFileSuffix + $Pname.extension
                        Write-Message -Message "PhysicalName = $($_.PhysicalName) " -Level Verbose
                    }
                }
            }
            if ('' -ne $RebaseBackupFolder -and $History.FullName[0] -notmatch 'http') {
                Write-Message -Message 'Rebasing backup files' -Level Verbose

                for ($j = 0; $j -lt $History.fullname.count; $j++) {
                    $file = [System.IO.FileInfo]($History.fullname[$j])
                    $History.fullname[$j] = $RebaseBackupFolder + $PathSep + $file.BaseName + $file.Extension
                }

            }

            $History
        }
    }
}

tools\dbatools\functions\Find-DbaView.ps1

function Find-DbaView {
    <#
    .SYNOPSIS
        Returns all views that contain a specific case-insensitive string or regex pattern.

    .DESCRIPTION
        This function can either run against specific databases or all databases searching all user or user and system views.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto-populated from the server

    .PARAMETER Pattern
        String pattern that you want to search for in the view text body

    .PARAMETER IncludeSystemObjects
        By default, system views are ignored but you can include them within the search using this parameter.

        Warning - this will likely make it super slow if you run it on all databases.

    .PARAMETER IncludeSystemDatabases
        By default system databases are ignored but you can include them within the search using this parameter

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: View
        Author: Claudio Silva  (@ClaudioESSilva)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Find-DbaView

    .EXAMPLE
        PS C:\> Find-DbaView -SqlInstance DEV01 -Pattern whatever

        Searches all user databases views for "whatever" in the text body

    .EXAMPLE
        PS C:\> Find-DbaView -SqlInstance sql2016 -Pattern '\w+@\w+\.\w+'

        Searches all databases for all views that contain a valid email pattern in the text body

    .EXAMPLE
        PS C:\> Find-DbaView -SqlInstance DEV01 -Database MyDB -Pattern 'some string' -Verbose

        Searches in "mydb" database views for "some string" in the text body

    .EXAMPLE
        PS C:\> Find-DbaView -SqlInstance sql2016 -Database MyDB -Pattern RUNTIME -IncludeSystemObjects

        Searches in "mydb" database views for "runtime" in the text body

    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "SqlServers")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [parameter(Mandatory)]
        [string]$Pattern,
        [switch]$IncludeSystemObjects,
        [switch]$IncludeSystemDatabases,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        $sql = "SELECT OBJECT_SCHEMA_NAME(vw.object_id) as ViewSchema, vw.name, m.definition as TextBody FROM sys.sql_modules m, sys.views vw WHERE m.object_id = vw.object_id"
        if (!$IncludeSystemObjects) { $sql = "$sql AND vw.is_ms_shipped = 0" }
        $everyservervwcount = 0
    }
    process {
        foreach ($Instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $Instance -SqlCredential $SqlCredential
            } catch {
                Write-Message -Level Warning -Message "Failed to connect to: $Instance"
                continue
            }

            if ($server.versionMajor -lt 9) {
                Write-Message -Level Warning -Message "This command only supports SQL Server 2005 and above."
                Continue
            }

            if ($IncludeSystemDatabases) {
                $dbs = $server.Databases | Where-Object { $_.Status -eq "normal" }
            } else {
                $dbs = $server.Databases | Where-Object { $_.Status -eq "normal" -and $_.IsSystemObject -eq $false }
            }

            if ($Database) {
                $dbs = $dbs | Where-Object Name -In $Database
            }

            if ($ExcludeDatabase) {
                $dbs = $dbs | Where-Object Name -NotIn $ExcludeDatabase
            }

            $totalcount = 0
            $dbcount = $dbs.count
            foreach ($db in $dbs) {
                Write-Message -Level Verbose -Message "Searching on database $db"

                # If system objects aren't needed, find view text using SQL
                # This prevents SMO from having to enumerate

                if (!$IncludeSystemObjects) {
                    Write-Message -Level Debug -Message $sql
                    $rows = $db.ExecuteWithResults($sql).Tables.Rows
                    $vwcount = 0

                    foreach ($row in $rows) {
                        $totalcount++; $vwcount++; $everyservervwcount++

                        $viewSchema = $row.ViewSchema
                        $view = $row.name

                        Write-Message -Level Verbose -Message "Looking in View: $viewSchema.$view TextBody for $pattern"
                        if ($row.TextBody -match $Pattern) {
                            $vw = $db.Views | Where-Object {$_.Schema -eq $viewSchema -and $_.Name -eq $view}

                            $viewText = $vw.TextBody.split("`n`r")
                            $vwTextFound = $viewText | Select-String -Pattern $Pattern | ForEach-Object { "(LineNumber: $($_.LineNumber)) $($_.ToString().Trim())" }

                            [PSCustomObject]@{
                                ComputerName   = $server.ComputerName
                                SqlInstance    = $server.ServiceName
                                Database       = $db.Name
                                Schema         = $vw.Schema
                                Name           = $vw.Name
                                Owner          = $vw.Owner
                                IsSystemObject = $vw.IsSystemObject
                                CreateDate     = $vw.CreateDate
                                LastModified   = $vw.DateLastModified
                                ViewTextFound  = $vwTextFound -join "`n"
                                View           = $vw
                                ViewFullText   = $vw.TextBody
                            } | Select-DefaultView -ExcludeProperty View, ViewFullText
                        }
                    }
                } else {
                    $Views = $db.Views

                    foreach ($vw in $Views) {
                        $totalcount++; $vwcount++; $everyservervwcount++

                        $viewSchema = $row.ViewSchema
                        $view = $vw.Name

                        Write-Message -Level Verbose -Message "Looking in View: $viewSchema.$view TextBody for $pattern"
                        if ($vw.TextBody -match $Pattern) {

                            $viewText = $vw.TextBody.split("`n`r")
                            $vwTextFound = $viewText | Select-String -Pattern $Pattern | ForEach-Object { "(LineNumber: $($_.LineNumber)) $($_.ToString().Trim())" }

                            [PSCustomObject]@{
                                ComputerName   = $server.ComputerName
                                SqlInstance    = $server.ServiceName
                                Database       = $db.Name
                                Schema         = $vw.Schema
                                Name           = $vw.Name
                                Owner          = $vw.Owner
                                IsSystemObject = $vw.IsSystemObject
                                CreateDate     = $vw.CreateDate
                                LastModified   = $vw.DateLastModified
                                ViewTextFound  = $vwTextFound -join "`n"
                                View           = $vw
                                ViewFullText   = $vw.TextBody
                            } | Select-DefaultView -ExcludeProperty View, ViewFullText
                        }
                    }
                }
                Write-Message -Level Verbose -Message "Evaluated $vwcount views in $db"
            }
            Write-Message -Level Verbose -Message "Evaluated $totalcount total views in $dbcount databases"
        }
    }
    end {
        Write-Message -Level Verbose -Message "Evaluated $everyservervwcount total views"
    }
}

tools\dbatools\functions\Find-DbaUserObject.ps1

#ValidationTags#Messaging#
function Find-DbaUserObject {
    <#
    .SYNOPSIS
        Searches SQL Server to find user-owned objects (i.e. not dbo or sa) or for any object owned by a specific user specified by the Pattern parameter.

    .DESCRIPTION
        Looks at the below list of objects to see if they are either owned by a user or a specific user (using the parameter -Pattern)
        Database Owner
        Agent Job Owner
        Used in Credential
        USed in Proxy
        SQL Agent Steps using a Proxy
        Endpoints
        Server Roles
        Database Schemas
        Database Roles
        Database Assembles
        Database Synonyms

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Pattern
        The regex pattern that the command will search for

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Object
        Author: Stephen Bennett, https://sqlnotesfromtheunderground.wordpress.com/

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Find-DbaUserObject

    .EXAMPLE
        PS C:\> Find-DbaUserObject -SqlInstance DEV01 -Pattern ad\stephen

        Searches user objects for owner ad\stephen

    .EXAMPLE
        PS C:\> Find-DbaUserObject -SqlInstance DEV01 -Verbose

        Shows all user owned (non-sa, non-dbo) objects and verbose output

    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "SqlInstances")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string]$Pattern,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {
        if ($Pattern -match '^[\w\d\.-]+\\[\w\d\.-]+$') {
            Write-Message -Level Verbose -Message "Too few slashes, adding extra as required by regex"
            $Pattern = $Pattern.Replace('\', '\\')
        }
    }
    process {
        foreach ($instance in $SqlInstance) {

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $saname = Get-SaLoginName $server

            ## Credentials
            if (-not $pattern) {
                Write-Message -Level Verbose -Message "Gathering data on instance objects"
                $creds = $server.Credentials
                $proxies = $server.JobServer.ProxyAccounts
                $endPoints = $server.Endpoints | Where-Object { $_.Owner -ne $saname }

                Write-Message -Level Verbose -Message "Gather data on Agent Jobs ownership"
                #Variable marked as unused by PSScriptAnalyzer
                #$jobs = $server.JobServer.Jobs | Where-Object { $_.OwnerLoginName -ne $saname }
            } else {
                Write-Message -Level Verbose -Message "Gathering data on instance objects"
                $creds = $server.Credentials | Where-Object { $_.Identity -match $pattern }
                $proxies = $server.JobServer.ProxyAccounts | Where-Object { $_.CredentialIdentity -match $pattern }
                $endPoints = $server.Endpoints | Where-Object { $_.Owner -match $pattern }

                Write-Message -Level Verbose -Message "Gather data on Agent Jobs ownership"
                #Variable marked as unused by PSScriptAnalyzer
                #$jobs = $server.JobServer.Jobs | Where-Object { $_.OwnerLoginName -match $pattern }
            }

            ## dbs
            if (-not $pattern) {
                foreach ($db in $server.Databases | Where-Object { $_.Owner -ne $saname }) {
                    Write-Message -Level Verbose -Message "checking if $db is owned "

                    [PSCustomObject]@{
                        ComputerName = $server.ComputerName
                        InstanceName = $server.ServiceName
                        SqlInstance  = $server.DomainInstanceName
                        Type         = "Database"
                        Owner        = $db.Owner
                        Name         = $db.Name
                        Parent       = $db.Parent.Name
                    }
                }
            } else {
                foreach ($db in $server.Databases | Where-Object { $_.Owner -match $pattern }) {
                    [PSCustomObject]@{
                        ComputerName = $server.ComputerName
                        InstanceName = $server.ServiceName
                        SqlInstance  = $server.DomainInstanceName
                        Type         = "Database"
                        Owner        = $db.Owner
                        Name         = $db.Name
                        Parent       = $db.Parent.Name
                    }
                }
            }

            ## agent jobs
            if (-not $pattern) {
                foreach ($job in $server.JobServer.Jobs | Where-Object { $_.OwnerLoginName -ne $saname }) {
                    [PSCustomObject]@{
                        ComputerName = $server.ComputerName
                        InstanceName = $server.ServiceName
                        SqlInstance  = $server.DomainInstanceName
                        Type         = "Agent Job"
                        Owner        = $job.OwnerLoginName
                        Name         = $job.Name
                        Parent       = $job.Parent.Name
                    }
                }
            } else {
                foreach ($job in $server.JobServer.Jobs | Where-Object { $_.OwnerLoginName -match $pattern }) {
                    [PSCustomObject]@{
                        ComputerName = $server.ComputerName
                        InstanceName = $server.ServiceName
                        SqlInstance  = $server.DomainInstanceName
                        Type         = "Agent Job"
                        Owner        = $job.OwnerLoginName
                        Name         = $job.Name
                        Parent       = $job.Parent.Name
                    }
                }
            }

            ## credentials
            foreach ($cred in $creds) {
                ## list credentials using the account

                [PSCustomObject]@{
                    ComputerName = $server.ComputerName
                    InstanceName = $server.ServiceName
                    SqlInstance  = $server.DomainInstanceName
                    Type         = "Credential"
                    Owner        = $cred.Identity
                    Name         = $cred.Name
                    Parent       = $cred.Parent.Name
                }
            }

            ## proxies
            foreach ($proxy in $proxies) {
                [PSCustomObject]@{
                    ComputerName = $server.ComputerName
                    InstanceName = $server.ServiceName
                    SqlInstance  = $server.DomainInstanceName
                    Type         = "Proxy"
                    Owner        = $proxy.CredentialIdentity
                    Name         = $proxy.Name
                    Parent       = $proxy.Parent.Name
                }

                ## list agent jobs steps using proxy
                foreach ($job in $server.JobServer.Jobs) {
                    foreach ($step in $job.JobSteps | Where-Object { $_.ProxyName -eq $proxy.Name }) {
                        [PSCustomObject]@{
                            ComputerName = $server.ComputerName
                            InstanceName = $server.ServiceName
                            SqlInstance  = $server.DomainInstanceName
                            Type         = "Agent Step"
                            Owner        = $step.ProxyName
                            Name         = $step.Name
                            Parent       = $step.Parent.Name #$step.Name
                        }
                    }
                }
            }


            ## endpoints
            foreach ($endPoint in $endPoints) {
                [PSCustomObject]@{
                    ComputerName = $server.ComputerName
                    InstanceName = $server.ServiceName
                    SqlInstance  = $server.DomainInstanceName
                    Type         = "Endpoint"
                    Owner        = $endpoint.Owner
                    Name         = $endPoint.Name
                    Parent       = $endPoint.Parent.Name
                }
            }

            ## Server Roles
            if (-not $pattern) {
                foreach ($role in $server.Roles | Where-Object { $_.Owner -ne $saname }) {
                    Write-Message -Level Verbose -Message "checking if $db is owned "
                    [PSCustomObject]@{
                        ComputerName = $server.ComputerName
                        InstanceName = $server.ServiceName
                        SqlInstance  = $server.DomainInstanceName
                        Type         = "Server Role"
                        Owner        = $role.Owner
                        Name         = $role.Name
                        Parent       = $role.Parent.Name
                    }
                }
            } else {
                foreach ($role in $server.Roles | Where-Object { $_.Owner -match $pattern }) {
                    [PSCustomObject]@{
                        ComputerName = $server.ComputerName
                        InstanceName = $server.ServiceName
                        SqlInstance  = $server.DomainInstanceName
                        Type         = "Server Role"
                        Owner        = $role.Owner
                        Name         = $role.Name
                        Parent       = $role.Parent.Name
                    }
                }
            }

            ## Loop internal database
            foreach ($db in $server.Databases | Where-Object IsAccessible) {
                Write-Message -Level Verbose -Message "Gather user owned object in database: $db"
                ##schemas
                $sysSchemas = "DatabaseMailUserRole", "db_ssisadmin", "db_ssisltduser", "db_ssisoperator", "SQLAgentOperatorRole", "SQLAgentReaderRole", "SQLAgentUserRole", "TargetServersRole", "RSExecRole"

                if (-not $pattern) {
                    $schemas = $db.Schemas | Where-Object { $_.IsSystemObject -eq 0 -and $_.Owner -ne "dbo" -and $sysSchemas -notcontains $_.Owner }
                } else {
                    $schemas = $db.Schemas | Where-Object { $_.IsSystemObject -eq 0 -and $_.Owner -match $pattern -and $sysSchemas -notcontains $_.Owner }
                }
                foreach ($schema in $schemas) {
                    [PSCustomObject]@{
                        ComputerName = $server.ComputerName
                        InstanceName = $server.ServiceName
                        SqlInstance  = $server.DomainInstanceName
                        Type         = "Schema"
                        Owner        = $schema.Owner
                        Name         = $schema.Name
                        Parent       = $schema.Parent.Name
                    }
                }

                ## database roles
                if (-not $pattern) {
                    $roles = $db.Roles | Where-Object { $_.IsSystemObject -eq 0 -and $_.Owner -ne "dbo" }
                } else {
                    $roles = $db.Roles | Where-Object { $_.IsSystemObject -eq 0 -and $_.Owner -match $pattern }
                }
                foreach ($role in $roles) {
                    [PSCustomObject]@{
                        ComputerName = $server.ComputerName
                        InstanceName = $server.ServiceName
                        SqlInstance  = $server.DomainInstanceName
                        Type         = "Database Role"
                        Owner        = $role.Owner
                        Name         = $role.Name
                        Parent       = $role.Parent.Name
                    }
                }

                ## assembly
                if (-not $pattern) {
                    $assemblies = $db.Assemblies | Where-Object { $_.IsSystemObject -eq 0 -and $_.Owner -ne "dbo" }
                } else {
                    $assemblies = $db.Assemblies | Where-Object { $_.IsSystemObject -eq 0 -and $_.Owner -match $pattern }
                }

                foreach ($assembly in $assemblies) {
                    [PSCustomObject]@{
                        ComputerName = $server.ComputerName
                        InstanceName = $server.ServiceName
                        SqlInstance  = $server.DomainInstanceName
                        Type         = "Database Assembly"
                        Owner        = $assembly.Owner
                        Name         = $assembly.Name
                        Parent       = $assembly.Parent.Name
                    }
                }

                ## synonyms
                if (-not $pattern) {
                    $synonyms = $db.Synonyms | Where-Object { $_.IsSystemObject -eq 0 -and $_.Owner -ne "dbo" }
                } else {
                    $synonyms = $db.Synonyms | Where-Object { $_.IsSystemObject -eq 0 -and $_.Owner -match $pattern }
                }

                foreach ($synonym in $synonyms) {
                    [PSCustomObject]@{
                        ComputerName = $server.ComputerName
                        InstanceName = $server.ServiceName
                        SqlInstance  = $server.DomainInstanceName
                        Type         = "Database Synonyms"
                        Owner        = $synonym.Owner
                        Name         = $synonym.Name
                        Parent       = $synonym.Parent.Name
                    }
                }
            }
        }
    }
}

tools\dbatools\functions\Get-DbaAgReplica.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaAgReplica {
    <#
    .SYNOPSIS
        Returns the availability group replica object found on the server.

    .DESCRIPTION
        Returns the availability group replica object found on the server.

   .PARAMETER SqlInstance
        The target SQL Server instance or instances. Server version must be SQL Server version 2012 or higher.

    .PARAMETER SqlCredential
        Login to the SqlInstance instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER AvailabilityGroup
        Specify the availability groups to query.

    .PARAMETER Replica
        Return only specific replicas.

    .PARAMETER InputObject
        Enables piped input from Get-DbaAvailabilityGroup.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: AG, HA, AvailabilityGroup, Replica
        Author: Shawn Melton (@wsmelton) | Chrissy LeMaire (@cl)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaAgReplica

    .EXAMPLE
        PS C:\> Get-DbaAgReplica -SqlInstance sql2017a

        Returns basic information on all the availability group replicas found on sql2017a

    .EXAMPLE
        PS C:\> Get-DbaAgReplica -SqlInstance sql2017a -AvailabilityGroup SharePoint

        Shows basic information on the replicas found on availability group SharePoint on sql2017a

    .EXAMPLE
        PS C:\> Get-DbaAgReplica -SqlInstance sql2017a | Select-Object *

        Returns full object properties on all availability group replicas found on sql2017a

    #>
    [CmdletBinding()]
    param (
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$AvailabilityGroup,
        [string[]]$Replica,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.AvailabilityGroup[]]$InputObject,
        [switch]$EnableException
    )
    process {
        if ($SqlInstance) {
            $InputObject += Get-DbaAvailabilityGroup -SqlInstance $SqlInstance -SqlCredential $SqlCredential -AvailabilityGroup $AvailabilityGroup
        }

        $availabilityReplicas = $InputObject.AvailabilityReplicas
        if ($Replica) {
            $availabilityReplicas = $InputObject.AvailabilityReplicas | Where-Object { $_.Name -in $Replica }
        }

        $defaults = 'ComputerName', 'InstanceName', 'SqlInstance', 'AvailabilityGroup', 'Name', 'Role', 'ConnectionState', 'RollupSynchronizationState', 'AvailabilityMode', 'BackupPriority', 'EndpointUrl', 'SessionTimeout', 'FailoverMode', 'ReadonlyRoutingList'

        foreach ($agreplica in $availabilityReplicas) {
            Add-Member -Force -InputObject $agreplica -MemberType NoteProperty -Name ComputerName -value $agreplica.Parent.ComputerName
            Add-Member -Force -InputObject $agreplica -MemberType NoteProperty -Name InstanceName -value $agreplica.Parent.InstanceName
            Add-Member -Force -InputObject $agreplica -MemberType NoteProperty -Name SqlInstance -value $agreplica.Parent.SqlInstance
            Add-Member -Force -InputObject $agreplica -MemberType NoteProperty -Name AvailabilityGroup -value $agreplica.Parent.Name
            Add-Member -Force -InputObject $agreplica -MemberType NoteProperty -Name Replica -value $agreplica.Name # backwards compat

            Select-DefaultView -InputObject $agreplica -Property $defaults
        }
    }
}

tools\dbatools\functions\Find-DbaTrigger.ps1

function Find-DbaTrigger {
    <#
    .SYNOPSIS
        Returns all triggers that contain a specific case-insensitive string or regex pattern.

    .DESCRIPTION
        This function search on Instance, Database and Object level.
        If you specify one or more databases, search on Server level will not be preformed.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto-populated from the server

    .PARAMETER Pattern
        String pattern that you want to search for in the trigger text body

    .PARAMETER TriggerLevel
        Allows specify the trigger level that you want to search. By default is All (Server, Database, Object).

    .PARAMETER IncludeSystemObjects
        By default, system triggers are ignored but you can include them within the search using this parameter.

        Warning - this will likely make it super slow if you run it on all databases.

    .PARAMETER IncludeSystemDatabases
        By default system databases are ignored but you can include them within the search using this parameter

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Trigger
        Author: Claudio Silva (@ClaudioESSilva)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Find-DbaTrigger

    .EXAMPLE
        PS C:\> Find-DbaTrigger -SqlInstance DEV01 -Pattern whatever

        Searches all user databases triggers for "whatever" in the text body

    .EXAMPLE
        PS C:\> Find-DbaTrigger -SqlInstance sql2016 -Pattern '\w+@\w+\.\w+'

        Searches all databases for all triggers that contain a valid email pattern in the text body

    .EXAMPLE
        PS C:\> Find-DbaTrigger -SqlInstance DEV01 -Database MyDB -Pattern 'some string' -Verbose

        Searches in "mydb" database triggers for "some string" in the text body

    .EXAMPLE
        PS C:\> Find-DbaTrigger -SqlInstance sql2016 -Database MyDB -Pattern RUNTIME -IncludeSystemObjects

        Searches in "mydb" database triggers for "runtime" in the text body

    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "SqlServers")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [parameter(Mandatory)]
        [string]$Pattern,
        [ValidateSet('All', 'Server', 'Database', 'Object')]
        [string]$TriggerLevel = 'All',
        [switch]$IncludeSystemObjects,
        [switch]$IncludeSystemDatabases,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        $sqlDatabaseTriggers = "SELECT tr.name, m.definition as TextBody FROM sys.sql_modules m, sys.triggers tr WHERE m.object_id = tr.object_id AND tr.parent_class = 0"

        $sqlTableTriggers = "SELECT OBJECT_SCHEMA_NAME(tr.parent_id) TableSchema, OBJECT_NAME(tr.parent_id) AS TableName, tr.name, m.definition as TextBody FROM sys.sql_modules m, sys.triggers tr WHERE m.object_id = tr.object_id AND tr.parent_class = 1"
        if (!$IncludeSystemObjects) { $sqlTableTriggers = "$sqlTableTriggers AND tr.is_ms_shipped = 0" }

        $everyserverstcount = 0
    }
    process {
        foreach ($Instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $Instance -SqlCredential $SqlCredential
            } catch {
                Write-Message -Level Warning -Message "Failed to connect to: $Instance"
                continue
            }

            if ($server.versionMajor -lt 9) {
                Write-Message -Level Warning -Message "This command only supports SQL Server 2005 and above."
                Continue
            }

            #search at instance level. Only if no database was specified
            if ((-Not $Database) -and ($TriggerLevel -in @('All', 'Server'))) {
                foreach ($trigger in $server.Triggers) {
                    $everyserverstcount++; $triggercount++
                    Write-Message -Level Debug -Message "Looking in Trigger: $trigger TextBody for $pattern"
                    if ($trigger.TextBody -match $Pattern) {

                        $triggerText = $trigger.TextBody.split("`n`r")
                        $trTextFound = $triggerText | Select-String -Pattern $Pattern | ForEach-Object { "(LineNumber: $($_.LineNumber)) $($_.ToString().Trim())" }

                        [PSCustomObject]@{
                            ComputerName     = $server.ComputerName
                            SqlInstance      = $server.ServiceName
                            TriggerLevel     = "Server"
                            Database         = $null
                            Object           = $null
                            Name             = $trigger.Name
                            IsSystemObject   = $trigger.IsSystemObject
                            CreateDate       = $trigger.CreateDate
                            LastModified     = $trigger.DateLastModified
                            TriggerTextFound = $trTextFound -join "`n"
                            Trigger          = $trigger
                            TriggerFullText  = $trigger.TextBody
                        } | Select-DefaultView -ExcludeProperty Trigger, TriggerFullText
                    }
                }
                Write-Message -Level Verbose -Message "Evaluated $triggercount triggers in $server"
            }

            if ($IncludeSystemDatabases) {
                $dbs = $server.Databases | Where-Object { $_.Status -eq "normal" }
            } else {
                $dbs = $server.Databases | Where-Object { $_.Status -eq "normal" -and $_.IsSystemObject -eq $false }
            }

            if ($Database) {
                $dbs = $dbs | Where-Object Name -In $Database
            }

            if ($ExcludeDatabase) {
                $dbs = $dbs | Where-Object Name -NotIn $ExcludeDatabase
            }

            $totalcount = 0
            $dbcount = $dbs.count

            if ($TriggerLevel -in @('All', 'Database', 'Object')) {
                foreach ($db in $dbs) {

                    Write-Message -Level Verbose -Message "Searching on database $db"

                    # If system objects aren't needed, find trigger text using SQL
                    # This prevents SMO from having to enumerate

                    if (!$IncludeSystemObjects) {
                        if ($TriggerLevel -in @('All', 'Database')) {
                            #Get Database Level triggers (DDL)
                            Write-Message -Level Debug -Message $sqlDatabaseTriggers
                            $rows = $db.ExecuteWithResults($sqlDatabaseTriggers).Tables.Rows
                            $triggercount = 0

                            foreach ($row in $rows) {
                                $totalcount++; $triggercount++; $everyserverstcount++

                                $trigger = $row.name

                                Write-Message -Level Verbose -Message "Looking in trigger $trigger for textBody with pattern $pattern on database $db"
                                if ($row.TextBody -match $Pattern) {
                                    $tr = $db.Triggers | Where-Object name -eq $row.name

                                    $triggerText = $tr.TextBody.split("`n`r")
                                    $trTextFound = $triggerText | Select-String -Pattern $Pattern | ForEach-Object { "(LineNumber: $($_.LineNumber)) $($_.ToString().Trim())" }

                                    [PSCustomObject]@{
                                        ComputerName     = $server.ComputerName
                                        SqlInstance      = $server.ServiceName
                                        TriggerLevel     = "Database"
                                        Database         = $db.name
                                        Object           = $tr.Parent
                                        Name             = $tr.Name
                                        IsSystemObject   = $tr.IsSystemObject
                                        CreateDate       = $tr.CreateDate
                                        LastModified     = $tr.DateLastModified
                                        TriggerTextFound = $trTextFound -join "`n"
                                        Trigger          = $tr
                                        TriggerFullText  = $tr.TextBody
                                    } | Select-DefaultView -ExcludeProperty Trigger, TriggerFullText
                                }
                            }
                        }

                        if ($TriggerLevel -in @('All', 'Object')) {
                            #Get Object Level triggers (DML)
                            Write-Message -Level Debug -Message $sqlTableTriggers
                            $rows = $db.ExecuteWithResults($sqlTableTriggers).Tables.Rows
                            $triggercount = 0

                            foreach ($row in $rows) {
                                $totalcount++; $triggercount++; $everyserverstcount++

                                $trigger = $row.name
                                $triggerParentSchema = $row.TableSchema
                                $triggerParent = $row.TableName

                                Write-Message -Level Verbose -Message "Looking in trigger $trigger for textBody with pattern $pattern in object $triggerParentSchema.$triggerParent at database $db"
                                if ($row.TextBody -match $Pattern) {

                                    $tr = ($db.Tables | Where-Object {$_.Name -eq $triggerParent -and $_.Schema -eq $triggerParentSchema}).Triggers | Where-Object name -eq $row.name

                                    $triggerText = $tr.TextBody.split("`n`r")
                                    $trTextFound = $triggerText | Select-String -Pattern $Pattern | ForEach-Object { "(LineNumber: $($_.LineNumber)) $($_.ToString().Trim())" }

                                    [PSCustomObject]@{
                                        ComputerName     = $server.ComputerName
                                        SqlInstance      = $server.ServiceName
                                        TriggerLevel     = "Object"
                                        Database         = $db.name
                                        Object           = $tr.Parent
                                        Name             = $tr.Name
                                        IsSystemObject   = $tr.IsSystemObject
                                        CreateDate       = $tr.CreateDate
                                        LastModified     = $tr.DateLastModified
                                        TriggerTextFound = $trTextFound -join "`n"
                                        Trigger          = $tr
                                        TriggerFullText  = $tr.TextBody
                                    } | Select-DefaultView -ExcludeProperty Trigger, TriggerFullText
                                }
                            }
                        }
                    } else {
                        if ($TriggerLevel -in @('All', 'Database')) {
                            #Get Database Level triggers (DDL)
                            $triggers = $db.Triggers

                            $triggercount = 0

                            foreach ($tr in $triggers) {
                                $totalcount++; $triggercount++; $everyserverstcount++
                                $trigger = $tr.Name

                                Write-Message -Level Verbose -Message "Looking in trigger $trigger for textBody with pattern $pattern on database $db"
                                if ($tr.TextBody -match $Pattern) {

                                    $triggerText = $tr.TextBody.split("`n`r")
                                    $trTextFound = $triggerText | Select-String -Pattern $Pattern | ForEach-Object { "(LineNumber: $($_.LineNumber)) $($_.ToString().Trim())" }

                                    [PSCustomObject]@{
                                        ComputerName     = $server.ComputerName
                                        SqlInstance      = $server.ServiceName
                                        TriggerLevel     = "Database"
                                        Database         = $db.name
                                        Object           = $tr.Parent
                                        Name             = $tr.Name
                                        IsSystemObject   = $tr.IsSystemObject
                                        CreateDate       = $tr.CreateDate
                                        LastModified     = $tr.DateLastModified
                                        TriggerTextFound = $trTextFound -join "`n"
                                        Trigger          = $tr
                                        TriggerFullText  = $tr.TextBody
                                    } | Select-DefaultView -ExcludeProperty Trigger, TriggerFullText
                                }
                            }
                        }

                        if ($TriggerLevel -in @('All', 'Object')) {
                            #Get Object Level triggers (DML)
                            $triggers = $db.Tables | ForEach-Object {$_.Triggers}

                            $triggercount = 0

                            foreach ($tr in $triggers) {
                                $totalcount++; $triggercount++; $everyserverstcount++
                                $trigger = $tr.Name

                                Write-Message -Level Verbose -Message "Looking in trigger $trigger for textBody with pattern $pattern in object $($tr.Parent) at database $db"
                                if ($tr.TextBody -match $Pattern) {

                                    $triggerText = $tr.TextBody.split("`n`r")
                                    $trTextFound = $triggerText | Select-String -Pattern $Pattern | ForEach-Object { "(LineNumber: $($_.LineNumber)) $($_.ToString().Trim())" }

                                    [PSCustomObject]@{
                                        ComputerName     = $server.ComputerName
                                        SqlInstance      = $server.ServiceName
                                        TriggerLevel     = "Object"
                                        Database         = $db.name
                                        Object           = $tr.Parent
                                        Name             = $tr.Name
                                        IsSystemObject   = $tr.IsSystemObject
                                        CreateDate       = $tr.CreateDate
                                        LastModified     = $tr.DateLastModified
                                        TriggerTextFound = $trTextFound -join "`n"
                                        Trigger          = $tr
                                        TriggerFullText  = $tr.TextBody
                                    } | Select-DefaultView -ExcludeProperty Trigger, TriggerFullText
                                }
                            }
                        }
                    }
                    Write-Message -Level Verbose -Message "Evaluated $triggercount triggers in $db"
                }
            }
            Write-Message -Level Verbose -Message "Evaluated $totalcount total triggers in $dbcount databases"
        }
    }
    end {
        Write-Message -Level Verbose -Message "Evaluated $everyserverstcount total triggers"
    }
}

tools\dbatools\functions\Get-DbaAvailableCollation.ps1

function Get-DbaAvailableCollation {
    <#
    .SYNOPSIS
        Function to get available collations for a given SQL Server

    .DESCRIPTION
        The Get-DbaAvailableCollation function returns the list of collations available on each SQL Server.
        Only the connect permission is required to get this information.

    .PARAMETER SqlInstance
        TThe target SQL Server instance or instances. Only connect permission is required.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Collation, Configuration
        Author: Bryan Hamby (@galador)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaAvailableCollation

    .EXAMPLE
        PS C:\> Get-DbaAvailableCollation -SqlInstance sql2016

        Gets all the collations from server sql2016 using NT authentication

    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        #Functions to get/cache the code page and language description.
        #It runs about 9x faster caching these (2 vs 18 seconds) in my test,
        #since there are so many duplicates

        #No longer supported by Windows, but still shows up in SQL Server
        #http://www.databaseteam.org/1-ms-sql-server/982faddda7a789a1.htm
        $locales = @{66577 = "Japanese_Unicode"}
        $codePages = @{}

        function Get-LocaleDescription ($LocaleId) {
            if ($locales.ContainsKey($LocaleId)) {
                $localeName = $locales.Get_Item($LocaleId)
            } else {
                try {
                    $localeName = (Get-Language $LocaleId).DisplayName
                } catch {
                    $localeName = $null
                }
                $locales.Set_Item($LocaleId, $localeName)
            }
            return $localeName
        }

        function Get-CodePageDescription ($codePageId) {
            if ($codePages.ContainsKey($codePageId)) {
                $codePageName = $codePages.Get_Item($codePageId)
            } else {
                try {
                    $codePageName = (Get-CodePage $codePageId).EncodingName
                } catch {
                    $codePageName = $null
                }
                $codePages.Set_Item($codePageId, $codePageName)
            }
            return $codePageName
        }
    }

    process {
        foreach ($Instance in $sqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $availableCollations = $server.EnumCollations()
            foreach ($collation in $availableCollations) {
                Add-Member -Force -InputObject $collation -MemberType NoteProperty -Name ComputerName -value $server.ComputerName
                Add-Member -Force -InputObject $collation -MemberType NoteProperty -Name InstanceName -value $server.ServiceName
                Add-Member -Force -InputObject $collation -MemberType NoteProperty -Name SqlInstance -value $server.DomainInstanceName
                Add-Member -Force -InputObject $collation -MemberType NoteProperty -Name CodePageName -Value (Get-CodePageDescription $collation.CodePage)
                Add-Member -Force -InputObject $collation -MemberType NoteProperty -Name LocaleName -Value (Get-LocaleDescription $collation.LocaleID)
            }

            Select-DefaultView -InputObject $availableCollations -Property ComputerName, InstanceName, SqlInstance, Name, CodePage, CodePageName, LocaleID, LocaleName, Description
        }
    }
}

tools\dbatools\functions\Get-DbaBackupDevice.ps1

#ValidationTags#Messaging#
function Get-DbaBackupDevice {
    <#
    .SYNOPSIS
        Gets SQL Backup Device information for each instance(s) of SQL Server.

    .DESCRIPTION
        The Get-DbaBackupDevice command gets SQL Backup Device information for each instance(s) of SQL Server.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function
        to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Backup
        Author: Garry Bargsley (@gbargsley), http://blog.garrybargsley.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaBackupDevice

    .EXAMPLE
        PS C:\> Get-DbaBackupDevice -SqlInstance localhost

        Returns all Backup Devices on the local default SQL Server instance

    .EXAMPLE
        PS C:\> Get-DbaBackupDevice -SqlInstance localhost, sql2016

        Returns all Backup Devices for the local and sql2016 SQL Server instances

    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            foreach ($backupDevice in $server.BackupDevices) {
                Add-Member -Force -InputObject $backupDevice -MemberType NoteProperty -Name ComputerName -value $backupDevice.Parent.ComputerName
                Add-Member -Force -InputObject $backupDevice -MemberType NoteProperty -Name InstanceName -value $backupDevice.Parent.ServiceName
                Add-Member -Force -InputObject $backupDevice -MemberType NoteProperty -Name SqlInstance -value $backupDevice.Parent.DomainInstanceName

                Select-DefaultView -InputObject $backupDevice -Property ComputerName, InstanceName, SqlInstance, Name, BackupDeviceType, PhysicalLocation, SkipTapeLabel
            }
        }
    }
}

tools\dbatools\functions\Get-DbaBackupHistory.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaBackupHistory {
    <#
    .SYNOPSIS
        Returns backup history details for databases on a SQL Server.

    .DESCRIPTION
        Returns backup history details for some or all databases on a SQL Server.

        You can even get detailed information (including file path) for latest full, differential and log files.

        Backups taken with the CopyOnly option will NOT be returned, unless the IncludeCopyOnly switch is present

        Reference: http://www.sqlhub.com/2011/07/find-your-backup-history-in-sql-server.html

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Credential object used to connect to the SQL Server Instance as a different user. This can be a Windows or SQL Server account. Windows users are determined by the existence of a backslash, so if you are intending to use an alternative Windows connection instead of a SQL login, ensure it contains a backslash.

    .PARAMETER Database
        Specifies one or more database(s) to process. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        Specifies one or more database(s) to exclude from processing.

    .PARAMETER IncludeCopyOnly
        By default Get-DbaBackupHistory will ignore backups taken with the CopyOnly option. This switch will include them

    .PARAMETER Force
        If this switch is enabled, a large amount of information is returned, similar to what SQL Server itself returns.

    .PARAMETER Since
        Specifies a DateTime object to use as the starting point for the search for backups.

    .PARAMETER RecoveryFork
        Specifies the Recovery Fork you want backup history for

    .PARAMETER Last
        If this switch is enabled, the most recent full chain of full, diff and log backup sets is returned.

    .PARAMETER LastFull
        If this switch is enabled, the most recent full backup set is returned.

    .PARAMETER LastDiff
        If this switch is enabled, the most recent differential backup set is returned.

    .PARAMETER LastLog
        If this switch is enabled, the most recent log backup is returned.

    .PARAMETER DeviceType
        Specifies a filter for backup sets based on DeviceTypes. Valid options are 'Disk','Permanent Disk Device', 'Tape', 'Permanent Tape Device','Pipe','Permanent Pipe Device','Virtual Device', in addition to custom integers for your own DeviceTypes.

    .PARAMETER Raw
        If this switch is enabled, one object per backup file is returned. Otherwise, media sets (striped backups across multiple files) will be grouped into a single return object.

    .PARAMETER Type
        Specifies one or more types of backups to return. Valid options are 'Full', 'Log', 'Differential', 'File', 'Differential File', 'Partial Full', and 'Partial Differential'. Otherwise, all types of backups will be returned unless one of the -Last* switches is enabled.

    .PARAMETER LastLsn
        Specifies a minimum LSN to use in filtering backup history. Only backups with an LSN greater than this value will be returned, which helps speed the retrieval process.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: DisasterRecovery, Backup
        Author: Chrissy LeMaire (@cl) | Stuart Moore (@napalmgram)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaBackupHistory

    .EXAMPLE
        PS C:\> Get-DbaBackupHistory -SqlInstance SqlInstance2014a

        Returns server name, database, username, backup type, date for all database backups still in msdb history on SqlInstance2014a. This may return many rows; consider using filters that are included in other examples.

    .EXAMPLE
        PS C:\> $cred = Get-Credential sqladmin
        Get-DbaBackupHistory -SqlInstance SqlInstance2014a -SqlCredential $cred

        Does the same as above but connect to SqlInstance2014a as SQL user "sqladmin"

    .EXAMPLE
        PS C:\> Get-DbaBackupHistory -SqlInstance SqlInstance2014a -Database db1, db2 -Since '2016-07-01 10:47:00'

        Returns backup information only for databases db1 and db2 on SqlInstance2014a since July 1, 2016 at 10:47 AM.

    .EXAMPLE
        PS C:\> Get-DbaBackupHistory -SqlInstance sql2014 -Database AdventureWorks2014, pubs -Force | Format-Table

        Returns information only for AdventureWorks2014 and pubs and formats the results as a table.

    .EXAMPLE
        PS C:\> Get-DbaBackupHistory -SqlInstance sql2014 -Database AdventureWorks2014 -Last

        Returns information about the most recent full, differential and log backups for AdventureWorks2014 on sql2014.

    .EXAMPLE
        PS C:\> Get-DbaBackupHistory -SqlInstance sql2014 -Database AdventureWorks2014 -Last -DeviceType Disk

        Returns information about the most recent full, differential and log backups for AdventureWorks2014 on sql2014, but only for backups to disk.

    .EXAMPLE
        PS C:\> Get-DbaBackupHistory -SqlInstance sql2014 -Database AdventureWorks2014 -Last -DeviceType 148,107

        Returns information about the most recent full, differential and log backups for AdventureWorks2014 on sql2014, but only for backups with device_type 148 and 107.

    .EXAMPLE
        PS C:\> Get-DbaBackupHistory -SqlInstance sql2014 -Database AdventureWorks2014 -LastFull

        Returns information about the most recent full backup for AdventureWorks2014 on sql2014.

    .EXAMPLE
        PS C:\> Get-DbaBackupHistory -SqlInstance sql2014 -Database AdventureWorks2014 -Type Full

        Returns information about all Full backups for AdventureWorks2014 on sql2014.

    .EXAMPLE
        PS C:\> Get-DbaCmsRegServer -SqlInstance sql2016 | Get-DbaBackupHistory

        Returns database backup information for every database on every server listed in the Central Management Server on sql2016.

    .EXAMPLE
        PS C:\> Get-DbaBackupHistory -SqlInstance SqlInstance2014a, sql2016 -Force

        Returns detailed backup history for all databases on SqlInstance2014a and sql2016.

    .EXAMPLE
        PS C:\> Get-DbaBackupHistory -SqlInstance sql2016 -Database db1 -RecoveryFork 38e5e84a-3557-4643-a5d5-eed607bef9c6 -Last

        If db1 has multiple recovery forks, specifying the RecoveryFork GUID will restrict the search to that fork.

    #>
    [CmdletBinding(DefaultParameterSetName = "Default")]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]
        $SqlInstance,
        [Alias("Credential")]
        [PsCredential]$SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [switch]$IncludeCopyOnly,
        [Parameter(ParameterSetName = "NoLast")]
        [switch]$Force,
        [DateTime]$Since = (Get-Date '01/01/1970'),
        [ValidateScript( {($_ -match '^(\{){0,1}[0-9a-fA-F]{8}\-[0-9a-fA-F]{4}\-[0-9a-fA-F]{4}\-[0-9a-fA-F]{4}\-[0-9a-fA-F]{12}(\}){0,1}$') -or ('' -eq $_)})]
        [string]$RecoveryFork,
        [Parameter(ParameterSetName = "Last")]
        [switch]$Last,
        [Parameter(ParameterSetName = "Last")]
        [switch]$LastFull,
        [Parameter(ParameterSetName = "Last")]
        [switch]$LastDiff,
        [Parameter(ParameterSetName = "Last")]
        [switch]$LastLog,
        [string[]]$DeviceType,
        [switch]$Raw,
        [bigint]$LastLsn,
        [ValidateSet("Full", "Log", "Differential", "File", "Differential File", "Partial Full", "Partial Differential")]
        [string[]]$Type,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        Write-Message -Level System -Message "Active Parameter set: $($PSCmdlet.ParameterSetName)."
        Write-Message -Level System -Message "Bound parameters: $($PSBoundParameters.Keys -join ", ")"

        $deviceTypeMapping = @{
            'Disk'                  = 2
            'Permanent Disk Device' = 102
            'Tape'                  = 5
            'Permanent Tape Device' = 105
            'Pipe'                  = 6
            'Permanent Pipe Device' = 106
            'Virtual Device'        = 7
            'URL'                   = 9
        }
        $deviceTypeFilter = @()
        foreach ($devType in $DeviceType) {
            if ($devType -in $deviceTypeMapping.Keys) {
                $deviceTypeFilter += $deviceTypeMapping[$devType]
            } else {
                $deviceTypeFilter += $devType
            }
        }
        $backupTypeMapping = @{
            'Log'                  = 'L'
            'Full'                 = 'D'
            'File'                 = 'F'
            'Differential'         = 'I'
            'Differential File'    = 'G'
            'Partial Full'         = 'P'
            'Partial Differential' = 'Q'
        }
        $backupTypeFilter = @()
        foreach ($typeFilter in $Type) {
            $backupTypeFilter += $backupTypeMapping[$typeFilter]
        }

    }

    process {
        foreach ($instance in $SqlInstance) {

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            if ($server.VersionMajor -ge 10) {
                $compressedFlag = $true
                # 2008 introduced compressed_backup_size
                $backupCols = "
                backupset.backup_size AS TotalSize,
                backupset.compressed_backup_size as CompressedBackupSize"
            } else {
                $compressedFlag = $false
                $backupCols = "
                backupset.backup_size AS TotalSize,
                NULL as CompressedBackupSize"
            }

            $databases = @()
            if ($null -ne $Database) {
                foreach ($db in $Database) {
                    $databases += [PSCustomObject]@{name = $db}
                }
            } else {
                $databases = $server.Databases
            }
            if ($ExcludeDatabase) {
                $databases = $databases | Where-Object Name -NotIn $ExcludeDatabase
            }
            foreach ($d in $deviceTypeFilter) {
                $deviceTypeFilterRight = "IN ('" + ($deviceTypeFilter -Join "','") + "')"
            }

            foreach ($b in $backupTypeFilter) {
                $backupTypeFilterRight = "IN ('" + ($backupTypeFilter -Join "','") + "')"
            }

            if ($last) {
                foreach ($db in $databases) {
                    if ($since) {
                        $sinceSqlFilter = "AND backupset.backup_finish_date >= '$($Since.ToString("yyyy-MM-ddTHH:mm:ss"))'"
                    }
                    if ($RecoveryFork) {
                        $recoveryForkSqlFilter = "AND backupset.last_recovery_fork_guid ='$RecoveryFork'"
                    }
                    if ($null -eq (Get-PsCallStack)[1].Command) {
                        $forkCheckSql = "
                                SELECT
                                    database_name,
                                    MIN(database_backup_lsn) as 'FirstLsn',
                                    MAX(database_backup_lsn) as 'FinalLsn',
                                    MIN(backup_start_date) as 'MinDate',
                                    MAX(backup_finish_date) as 'MaxDate',
                                    last_recovery_fork_guid 'RecFork',
                                    count(1) as 'backupcount'
                                FROM msdb.dbo.backupset
                                WHERE database_name='$($db.name)'
                                $sinceSqlFilter
                                $recoveryForkSqlFilter
                                GROUP by database_name, last_recovery_fork_guid
                                "

                        $results = $server.ConnectionContext.ExecuteWithResults($forkCheckSql).Tables.Rows
                        if ($results.count -gt 1) {
                            Write-Message -Message "Found backups from multiple recovery forks for $($db.name) on $($server.name), this may affect your results" -Level Warning
                            foreach ($result in $results) {
                                Write-Message -Message "Between $($result.MinDate)/$($result.FirstLsn) and $($result.MaxDate)/$($result.FinalLsn) $($result.name) was on Recovery Fork GUID $($result.RecFork) ($($result.backupcount) backups)"   -Level Warning
                            }

                        }
                    }
                    #Get the full and build upwards
                    $allBackups = @()
                    $allBackups += $fullDb = Get-DbaBackupHistory -SqlInstance $server -Database $db.Name -LastFull -raw:$Raw -DeviceType $DeviceType -IncludeCopyOnly:$IncludeCopyOnly -Since:$since -RecoveryFork $RecoveryFork
                    $diffDb = Get-DbaBackupHistory -SqlInstance $server -Database $db.Name -LastDiff -raw:$Raw -DeviceType $DeviceType -IncludeCopyOnly:$IncludeCopyOnly -Since:$since -RecoveryFork $RecoveryFork
                    if ($diffDb.LastLsn -gt $fullDb.LastLsn -and $diffDb.DatabaseBackupLSN -eq $fullDb.CheckPointLSN ) {
                        Write-Message -Level Verbose -Message "Valid Differential backup "
                        $allBackups += $diffDb
                        $tlogStartDsn = ($diffDb.FirstLsn -as [bigint])
                    } else {
                        Write-Message -Level Verbose -Message "No Diff found"
                        try {
                            [bigint]$tlogStartDsn = $fullDb.FirstLsn.ToString()
                        } catch {
                            continue
                        }
                    }
                    $allBackups += Get-DbaBackupHistory -SqlInstance $server -Database $db.Name -raw:$raw -DeviceType $DeviceType -LastLsn $tlogStartDsn -IncludeCopyOnly:$IncludeCopyOnly -Since:$since -RecoveryFork $RecoveryFork | Where-Object {
                        $_.Type -eq 'Log' -and [bigint]$_.LastLsn -gt [bigint]$tlogStartDsn -and [bigint]$_.DatabaseBackupLSN -eq [bigint]$fullDb.CheckPointLSN -and $_.LastRecoveryForkGuid -eq $fullDb.LastRecoveryForkGuid
                    }
                    #This line does the output for -Last!!!
                    $allBackups |  Sort-Object -Property LastLsn, Type
                }
                continue
            }

            if ($LastFull -or $LastDiff -or $LastLog) {
                if ($LastFull) {
                    $first = 'D'; $second = 'P'
                }
                if ($LastDiff) {
                    $first = 'I'; $second = 'Q'
                }
                if ($LastLog) {
                    $first = 'L'; $second = 'L'
                }
                $databases = $databases | Select-Object -Unique -Property Name
                $sql = ""
                foreach ($db in $databases) {
                    Write-Message -Level Verbose -Message "Processing $($db.name)" -Target $db
                    if ($since) {
                        $sinceSqlFilter = "AND backupset.backup_finish_date >= '$($Since.ToString("yyyy-MM-ddTHH:mm:ss"))'"
                    }
                    if ($RecoveryFork) {
                        $recoveryForkSqlFilter = "AND backupset.last_recovery_fork_guid ='$RecoveryFork'"
                    }
                    if ((Get-PsCallStack)[1].Command -notlike 'Get-DbaBackupHistory*') {
                        $forkCheckSql = "
                            SELECT
                                database_name,
                                MIN(database_backup_lsn) as 'FirstLsn',
                                MAX(database_backup_lsn) as 'FinalLsn',
                                MIN(backup_start_date) as 'MinDate',
                                MAX(backup_finish_date) as 'MaxDate',
                                last_recovery_fork_guid 'RecFork',
                                count(1) as 'backupcount'
                            FROM msdb.dbo.backupset
                            WHERE database_name='$($db.name)'
                            $sinceSqlFilter
                            $recoveryForkSqlFilter
                            GROUP by database_name, last_recovery_fork_guid
                        "

                        $results = $server.ConnectionContext.ExecuteWithResults($forkCheckSql).Tables.Rows
                        if ($results.count -gt 1) {
                            Write-Message -Message "Found backups from multiple recovery forks for $($db.name) on $($server.name), this may affect your results" -Level Warning
                            foreach ($result in $results) {
                                Write-Message -Message "Between $($result.MinDate)/$($result.FirstLsn) and $($result.MaxDate)/$($result.FinalLsn) $($result.name) was on Recovery Fork GUID $($result.RecFork) ($($result.backupcount) backups)"   -Level Warning
                            }

                        }
                    }
                    $whereCopyOnly = $null
                    if ($true -ne $IncludeCopyOnly) {
                        $whereCopyOnly = " AND is_copy_only='0' "
                    }
                    if ($deviceTypeFilter) {
                        $devTypeFilterWhere = "AND mediafamily.device_type $deviceTypeFilterRight"
                    }
                    if ($since) {
                        $sinceSqlFilter = "AND backupset.backup_finish_date >= '$($Since.ToString("yyyy-MM-ddTHH:mm:ss"))'"
                    }
                    # recap for future editors (as this has been discussed over and over):
                    #   - original editors (from hereon referred as "we") rank over backupset.last_lsn desc, backupset.backup_finish_date desc for a good reason: DST
                    #     all times are recorded with the timezone of the server
                    #   - we thought about ranking over backupset.backup_set_id desc, backupset.last_lsn desc, backupset.backup_finish_date desc
                    #     but there is no explicit documentation about "when" a row gets inserted into backupset. Theoretically it _could_
                    #     happen that backup_set_id for the same database has not the same order of last_lsn.
                    #   - given ultimately to restore something lsn IS the source of truth, we decided to trust that and only that
                    #   - we know that sometimes it happens to drop a database without deleting the history. Assuming then to create a database with the same name,
                    #     and given the lsn are composed in the first part by the VLF SeqID, it happens seldomly that for the same database_name backupset holds
                    #     last_lsn out of order. To avoid this behaviour, we filter by database_guid choosing the guid that has MAX(backup_finish_date), as we know
                    #     last_lsn cannot be out-of-order for the same database, and the same database cannot have different database_guid
                    $sql += "
                                SELECT
                                    a.BackupSetRank,
                                    a.Server,
                                    a.[Database],
                                    a.Username,
                                    a.Start,
                                    a.[End],
                                    a.Duration,
                                    a.[Path],
                                    a.Type,
                                    a.TotalSize,
                                    a.CompressedBackupSize,
                                    a.MediaSetId,
                                    a.BackupSetID,
                                    a.Software,
                                    a.position,
                                    a.first_lsn,
                                    a.database_backup_lsn,
                                    a.checkpoint_lsn,
                                    a.last_lsn,
                                    a.first_lsn as 'FirstLSN',
                                    a.database_backup_lsn as 'DatabaseBackupLsn',
                                    a.checkpoint_lsn as 'CheckpointLsn',
                                    a.last_lsn as 'LastLsn',
                                    a.software_major_version,
                                    a.DeviceType,
                                    a.is_copy_only,
                                    a.last_recovery_fork_guid,
                                    a.recovery_model
                                FROM (SELECT
                                  RANK() OVER (ORDER BY backupset.last_lsn desc, backupset.backup_finish_date DESC) AS 'BackupSetRank',
                                  backupset.database_name AS [Database],
                                  backupset.user_name AS Username,
                                  backupset.backup_start_date AS Start,
                                  backupset.server_name as [Server],
                                  backupset.backup_finish_date AS [End],
                                  DATEDIFF(SECOND, backupset.backup_start_date, backupset.backup_finish_date) AS Duration,
                                  mediafamily.physical_device_name AS Path,
                                  $backupCols,
                                  CASE backupset.type
                                    WHEN 'L' THEN 'Log'
                                    WHEN 'D' THEN 'Full'
                                    WHEN 'F' THEN 'File'
                                    WHEN 'I' THEN 'Differential'
                                    WHEN 'G' THEN 'Differential File'
                                    WHEN 'P' THEN 'Partial Full'
                                    WHEN 'Q' THEN 'Partial Differential'
                                    ELSE NULL
                                  END AS Type,
                                  backupset.media_set_id AS MediaSetId,
                                  mediafamily.media_family_id as mediafamilyid,
                                  backupset.backup_set_id as BackupSetID,
                                  CASE mediafamily.device_type
                                    WHEN 2 THEN 'Disk'
                                    WHEN 102 THEN 'Permanent Disk Device'
                                    WHEN 5 THEN 'Tape'
                                    WHEN 105 THEN 'Permanent Tape Device'
                                    WHEN 6 THEN 'Pipe'
                                    WHEN 106 THEN 'Permanent Pipe Device'
                                    WHEN 7 THEN 'Virtual Device'
                                    WHEN 9 THEN 'URL'
                                    ELSE 'Unknown'
                                    END AS DeviceType,
                                  backupset.position,
                                  backupset.first_lsn,
                                  backupset.database_backup_lsn,
                                  backupset.checkpoint_lsn,
                                  backupset.last_lsn,
                                  backupset.software_major_version,
                                  mediaset.software_name AS Software,
                                  backupset.is_copy_only,
                                  backupset.last_recovery_fork_guid,
                                  backupset.recovery_model
                                FROM msdb..backupmediafamily AS mediafamily
                                JOIN msdb..backupmediaset AS mediaset
                                  ON mediafamily.media_set_id = mediaset.media_set_id
                                JOIN msdb..backupset AS backupset
                                  ON backupset.media_set_id = mediaset.media_set_id
                                JOIN (
                                    SELECT DISTINCT database_guid, database_name, backup_finish_date
                                    FROM msdb..backupset
                                    WHERE backupset.database_name = '$($db.Name)'
                                ) dbguid
                                  ON dbguid.database_name = backupset.database_name
                                  AND dbguid.database_guid = backupset.database_guid
                                JOIN (
                                    SELECT database_name, MAX(backup_finish_date) max_finish_date
                                    FROM msdb..backupset
                                    WHERE backupset.database_name = '$($db.Name)'
                                    GROUP BY database_name
                                ) dbguid_support
                                  ON dbguid_support.database_name = backupset.database_name
                                  AND dbguid.backup_finish_date = dbguid_support.max_finish_date
                                WHERE backupset.database_name = '$($db.Name)' $whereCopyOnly
                                AND (type = '$first' OR type = '$second')
                                $devTypeFilterWhere
                                $sinceSqlFilter
                                $recoveryForkSqlFilter
                                ) AS a
                                WHERE a.BackupSetRank = 1
                                ORDER BY a.Type;
                                "
                }
                $sql = $sql -join "; "
            } else {
                if ($Force -eq $true) {
                    $select = "SELECT * "
                } else {
                    $select = "
                            SELECT
                              backupset.database_name AS [Database],
                              backupset.user_name AS Username,
                              backupset.server_name as [server],
                              backupset.backup_start_date AS [Start],
                              backupset.backup_finish_date AS [End],
                              DATEDIFF(SECOND, backupset.backup_start_date, backupset.backup_finish_date) AS Duration,
                              mediafamily.physical_device_name AS Path,
                              $backupCols,
                              CASE backupset.type
                                WHEN 'L' THEN 'Log'
                                WHEN 'D' THEN 'Full'
                                WHEN 'F' THEN 'File'
                                WHEN 'I' THEN 'Differential'
                                WHEN 'G' THEN 'Differential File'
                                WHEN 'P' THEN 'Partial Full'
                                WHEN 'Q' THEN 'Partial Differential'
                                ELSE NULL
                              END AS Type,
                              backupset.media_set_id AS MediaSetId,
                              mediafamily.media_family_id as MediaFamilyId,
                              backupset.backup_set_id as BackupSetId,
                              CASE mediafamily.device_type
                                WHEN 2 THEN 'Disk'
                                WHEN 102 THEN 'Permanent Disk Device'
                                WHEN 5 THEN 'Tape'
                                WHEN 105 THEN 'Permanent Tape Device'
                                WHEN 6 THEN 'Pipe'
                                WHEN 106 THEN 'Permanent Pipe Device'
                                WHEN 7 THEN 'Virtual Device'
                                WHEN 9 THEN 'URL'
                                ELSE 'Unknown'
                              END AS DeviceType,
                              backupset.position,
                              backupset.first_lsn,
                              backupset.database_backup_lsn,
                              backupset.checkpoint_lsn,
                              backupset.last_lsn,
                              backupset.first_lsn as 'FirstLSN',
                              backupset.database_backup_lsn as 'DatabaseBackupLsn',
                              backupset.checkpoint_lsn as 'CheckpointLsn',
                              backupset.last_lsn as 'LastLsn',
                              backupset.software_major_version,
                              mediaset.software_name AS Software,
                              backupset.is_copy_only,
                              backupset.last_recovery_fork_guid,
                              backupset.recovery_model"
                }

                $from = " FROM msdb..backupmediafamily mediafamily
                             INNER JOIN msdb..backupmediaset mediaset ON mediafamily.media_set_id = mediaset.media_set_id
                             INNER JOIN msdb..backupset backupset ON backupset.media_set_id = mediaset.media_set_id"
                if ($Database -or $Since -or $Last -or $LastFull -or $LastLog -or $LastDiff -or $deviceTypeFilter -or $LastLsn -or $backupTypeFilter) {
                    $where = " WHERE "
                }

                $whereArray = @()

                if ($Database.length -gt 0) {
                    $dbList = $Database -join "','"
                    $whereArray += "database_name IN ('$dbList')"
                }

                if ($true -ne $IncludeCopyOnly) {
                    $whereArray += "is_copy_only='0'"
                }

                if ($Last -or $LastFull -or $LastLog -or $LastDiff) {
                    $tempWhere = $whereArray -join " AND "
                    $whereArray += "type = 'Full' AND mediaset.media_set_id = (SELECT TOP 1 mediaset.media_set_id $from $tempWhere ORDER BY backupset.last_lsn DESC)"
                }

                if ($null -ne $Since) {
                    $whereArray += "backupset.backup_finish_date >= '$($Since.ToString("yyyy-MM-ddTHH:mm:ss"))'"
                }

                if ($deviceTypeFilter) {
                    $whereArray += "mediafamily.device_type $deviceTypeFilterRight"
                }
                if ($backupTypeFilter) {
                    $whereArray += "backupset.type $backupTypeFilterRight"
                }

                if ($LastLsn) {
                    $whereArray += "backupset.last_lsn > $LastLsn"
                }
                if ($where.Length -gt 0) {
                    $whereArray = $whereArray -join " AND "
                    $where = "$where $whereArray"
                }

                $sql = "$select $from $where ORDER BY backupset.last_lsn DESC"
            }

            Write-Message -Level Debug -Message "SQL Statement: `n$sql"
            Write-Message -Level SomewhatVerbose -Message "Executing sql query."
            $results = $server.ConnectionContext.ExecuteWithResults($sql).Tables.Rows | Select-Object * -ExcludeProperty BackupSetRank, RowError, RowState, Table, ItemArray, HasErrors

            if ($raw) {
                Write-Message -Level SomewhatVerbose -Message "Processing as Raw Output."
                $results | Select-Object *, @{ Name = "FullName"; Expression = { $_.Path } }
                Write-Message -Level SomewhatVerbose -Message "$($results.Count) result sets found."
            } else {
                Write-Message -Level SomewhatVerbose -Message "Processing as grouped output."
                $groupedResults = $results | Group-Object -Property BackupsetId
                Write-Message -Level SomewhatVerbose -Message "$($groupedResults.Count) result-groups found."
                $groupResults = @()
                $backupSetIds = $groupedResults.Name
                $backupSetIdsList = $backupSetIds -Join ","
                if ($groupedResults.Count -gt 0) {
                    $backupSetIdsWhere = "backup_set_id IN ($backupSetIdsList)"
                    $fileAllSql = "SELECT backup_set_id, file_type as FileType, logical_name as LogicalName, physical_name as PhysicalName
                                   FROM msdb..backupfile WHERE $backupSetIdsWhere"
                    Write-Message -Level Debug -Message "FileSQL: $fileAllSql"
                    $fileListResults = $server.Query($fileAllSql)
                } else {
                    $fileListResults = @()
                }
                $fileListHash = @{}
                foreach ($fl in $fileListResults) {
                    if (-not($fileListHash.ContainsKey($fl.backup_set_id))) {
                        $fileListHash[$fl.backup_set_id] = @()
                    }
                    $fileListHash[$fl.backup_set_id] += $fl
                }
                foreach ($group in $groupedResults) {
                    $commonFields = $group.Group[0]
                    $groupLength = $group.Group.Count
                    if ($groupLength -eq 1) {
                        $start = $commonFields.Start
                        $end = $commonFields.End
                        $duration = New-TimeSpan -Seconds $commonFields.Duration
                    } else {
                        $start = ($group.Group.Start | Measure-Object -Minimum).Minimum
                        $end = ($group.Group.End | Measure-Object -Maximum).Maximum
                        $duration = New-TimeSpan -Seconds ($group.Group.Duration | Measure-Object -Maximum).Maximum
                    }
                    $compressedBackupSize = $commonFields.CompressedBackupSize
                    if ($compressedFlag -eq $true) {
                        $ratio = [Math]::Round(($commonFields.TotalSize) / ($compressedBackupSize), 2)
                    } else {
                        $compressedBackupSize = $null
                        $ratio = 1
                    }
                    $historyObject = New-Object Sqlcollaborative.Dbatools.Database.BackupHistory
                    $historyObject.ComputerName = $server.ComputerName
                    $historyObject.InstanceName = $server.ServiceName
                    $historyObject.SqlInstance = $server.DomainInstanceName
                    $historyObject.Database = $commonFields.Database
                    $historyObject.UserName = $commonFields.UserName
                    $historyObject.Start = $start
                    $historyObject.End = $end
                    $historyObject.Duration = $duration
                    $historyObject.Path = $group.Group.Path
                    $historyObject.TotalSize = $commonFields.TotalSize
                    $historyObject.CompressedBackupSize = $compressedBackupSize
                    $historyObject.CompressionRatio = $ratio
                    $historyObject.Type = $commonFields.Type
                    $historyObject.BackupSetId = $commonFields.BackupSetId
                    $historyObject.DeviceType = $commonFields.DeviceType
                    $historyObject.Software = $commonFields.Software
                    $historyObject.FullName = $group.Group.Path
                    $historyObject.FileList = $fileListHash[$commonFields.BackupSetID] | Select-Object FileType, LogicalName, PhysicalName
                    $historyObject.Position = $commonFields.Position
                    $historyObject.FirstLsn = $commonFields.First_LSN
                    $historyObject.DatabaseBackupLsn = $commonFields.database_backup_lsn
                    $historyObject.CheckpointLsn = $commonFields.checkpoint_lsn
                    $historyObject.LastLsn = $commonFields.Last_Lsn
                    $historyObject.SoftwareVersionMajor = $commonFields.Software_Major_Version
                    $historyObject.IsCopyOnly = ($commonFields.is_copy_only -eq 1)
                    $historyObject.LastRecoveryForkGuid = $commonFields.last_recovery_fork_guid
                    $historyObject.RecoveryModel = $commonFields.recovery_model
                    $historyObject
                }
                $groupResults | Sort-Object -Property LastLsn, Type
            }
        }
    }
}

tools\dbatools\functions\Get-DbaBackupInformation.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaBackupInformation {
    <#
    .SYNOPSIS
        Scan backup files and creates a set, compatible with Restore-DbaDatabase

    .DESCRIPTION
        Upon being passed a list of potential backups files this command will scan the files, select those that contain SQL Server
        backup sets. It will then filter those files down to a set

        The function defaults to working on a remote instance. This means that all paths passed in must be relative to the remote instance.
        XpDirTree will be used to perform the file scans

        Various means can be used to pass in a list of files to be considered. The default is to non recursively scan the folder
        passed in.

    .PARAMETER Path
        Path to SQL Server backup files.

        Paths passed in as strings will be scanned using the desired method, default is a non recursive folder scan
        Accepts multiple paths separated by ','

        Or it can consist of FileInfo objects, such as the output of Get-ChildItem or Get-Item. This allows you to work with
        your own file structures as needed

    .PARAMETER SqlInstance
        The SQL Server instance to be used to read the headers of the backup files

    .PARAMETER SqlCredential
        Allows you to login to servers using SQL Logins as opposed to Windows Auth/Integrated/Trusted.

    .PARAMETER DatabaseName
        An array of Database Names to filter by. If empty all databases are returned.

    .PARAMETER SourceInstance
        If provided only backup originating from this destination will be returned. This SQL instance will not be connected to or involved in this work

    .PARAMETER NoXpDirTree
        If this switch is set, then Files will be parsed as locally files. This can cause failures if the running user can see files that the parsing SQL Instance cannot

    .PARAMETER DirectoryRecurse
        If specified the provided path/directory will be traversed (only applies if not using XpDirTree)

    .PARAMETER Anonymise
        If specified we will output the results with ComputerName, InstanceName, Database, UserName, Paths, and Logical and Physical Names hashed out
        This options is mainly for use if we need you to submit details for fault finding to the dbatools team

    .PARAMETER ExportPath
        If specified the output will export via CliXml format to the specified file. This allows you to store the backup history object for later usage, or move it between computers

    .PARAMETER NoClobber
        If specified will stop Export from overwriting an existing file, the default is to overwrite

    .PARAMETER PassThru
        When data is exported the cmdlet will return no other output, this switch means it will also return the normal output which can be then piped into another command

    .PARAMETER MaintenanceSolution
        This switch tells the function that the folder is the root of a Ola Hallengren backup folder

    .PARAMETER IgnoreLogBackup
        This switch only works with the MaintenanceSolution switch. With an Ola Hallengren style backup we can be sure that the LOG folder contains only log backups and skip it.
        For all other scenarios we need to read the file headers to be sure.

    .PARAMETER AzureCredential
        The name of the SQL Server credential to be used if restoring from an Azure hosted backup

    .PARAMETER Import
        When specified along with a path the command will import a previously exported BackupHistory object from an xml file.

    .PARAMETER EnableException
        Replaces user friendly yellow warnings with bloody red exceptions of doom!
        Use this if you want the function to throw terminating errors you want to catch.

    .NOTES
        Tags: DisasterRecovery, Backup, Restore
        Author: Chrissy LeMaire (@cl) | Stuart Moore (@napalmgram)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaBackupInformation

    .EXAMPLE
        PS C:\> Get-DbaBackupInformation -SqlInstance Server1 -Path c:\backups\ -DirectoryRecurse

        Will use the Server1 instance to recursively read all backup files under c:\backups, and return a dbatools BackupHistory object

    .EXAMPLE
        PS C:\> Get-DbaBackupInformation -SqlInstance Server1 -Path c:\backups\ -DirectoryRecurse -ExportPath c:\store\BackupHistory.xml
        PS C:\> robocopy c:\store\ \\remoteMachine\C$\store\ BackupHistory.xml
        PS C:\> Get-DbaBackupInformation -Import -Path  c:\store\BackupHistory.xml | Restore-DbaDatabase -SqlInstance Server2 -TrustDbBackupHistory

        This example creates backup history output from server1 and copies the file to the remote machine in order to preserve backup history. It is then used to restore the databases onto server2.

    .EXAMPLE
        PS C:\> Get-DbaBackupInformation -SqlInstance Server1 -Path c:\backups\ -DirectoryRecurse -ExportPath C:\store\BackupHistory.xml -PassThru | Restore-DbaDatabase -SqlInstance Server2 -TrustDbBackupHistory

        In this example we gather backup information, export it to an xml file, and then pass it on through to Restore-DbaDatabase.
        This allows us to repeat the restore without having to scan all the backup files again

    .EXAMPLE
        PS C:\> Get-ChildItem c:\backups\ -recurse -files | Where-Object {$_.extension -in ('.bak','.trn') -and $_.LastWriteTime -gt (get-date).AddMonths(-1)} | Get-DbaBackupInformation -SqlInstance Server1 -ExportPath C:\backupHistory.xml

        This lets you keep a record of all backup history from the last month on hand to speed up refreshes

    .EXAMPLE
        PS C:\> $Backups = Get-DbaBackupInformation -SqlInstance Server1 -Path \\network\backups
        PS C:\> $Backups += Get-DbaBackupInformation -SqlInstance Server2 -NoXpDirTree -Path c:\backups

        Scan the unc folder \\network\backups with Server1, and then scan the C:\backups folder on
        Server2 not using xp_dirtree, adding the results to the first set.

    .EXAMPLE
        PS C:\> $Backups = Get-DbaBackupInformation -SqlInstance Server1 -Path \\network\backups -MaintenanceSolution

        When MaintenanceSolution is indicated we know we are dealing with the output from Ola Hallengren backup scripts. So we make sure that a FULL folder exists in the first level of Path, if not we shortcut scanning all the files as we have nothing to work with

    .EXAMPLE
        PS C:\> $Backups = Get-DbaBackupInformation -SqlInstance Server1 -Path \\network\backups -MaintenanceSolution -IgnoreLogBackup

        As we know we are dealing with an Ola Hallengren style backup folder from the MaintenanceSolution switch, when IgnoreLogBackup is also included we can ignore the LOG folder to skip any scanning of log backups. Note this also means they WON'T be restored

    #>
    [CmdletBinding( DefaultParameterSetName = "Create")]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSAvoidUsingPlainTextForPassword", "", Justification = "For Parameter AzureCredential")]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [object[]]$Path,
        [parameter(Mandatory, ParameterSetName = "Create")]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter]$SqlInstance,
        [parameter(ParameterSetName = "Create")]
        [PSCredential]$SqlCredential,
        [string[]]$DatabaseName,
        [string[]]$SourceInstance,
        [parameter(ParameterSetName = "Create")]
        [Switch]$NoXpDirTree,
        [parameter(ParameterSetName = "Create")]
        [switch]$DirectoryRecurse,
        [switch]$EnableException,
        [switch]$MaintenanceSolution,
        [switch]$IgnoreLogBackup,
        [string]$ExportPath,
        [string]$AzureCredential,
        [parameter(ParameterSetName = "Import")]
        [switch]$Import,
        [switch][Alias('Anonymize')]$Anonymise,
        [Switch]$NoClobber,
        [Switch]$PassThru

    )
    begin {
        function Get-HashString {
            param(
                [String]$InString
            )

            $StringBuilder = New-Object System.Text.StringBuilder
            [System.Security.Cryptography.HashAlgorithm]::Create("md5").ComputeHash([System.Text.Encoding]::UTF8.GetBytes($InString))| ForEach-Object {
                [Void]$StringBuilder.Append($_.ToString("x2"))
            }
            return $StringBuilder.ToString()
        }
        Write-Message -Level InternalComment -Message "Starting"
        Write-Message -Level Debug -Message "Parameters bound: $($PSBoundParameters.Keys -join ", ")"

        if (Test-Bound -ParameterName ExportPath) {
            if ($true -eq $NoClobber) {
                if (Test-Path $ExportPath) {
                    Stop-Function -Message "$ExportPath exists and NoClobber set"
                    return
                }
            }
        }
        if ($PSCmdlet.ParameterSetName -eq "Create") {
            try {
                $server = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
                return
            }
        }

        if ($true -eq $IgnoreLogBackup -and $true -ne $MaintenanceSolution) {
            Write-Message -Message "IgnoreLogBackup can only by used with MaintenanceSolution. Will not be used" -Level Warning
        }
    }
    process {
        if (Test-FunctionInterrupt) { return }
        if ((Test-Bound -Parameter Import) -and ($true -eq $Import)) {
            foreach ($f in $Path) {
                if (Test-Path -Path $f) {
                    $GroupResults += Import-CliXml -Path $f
                    foreach ($group in  $GroupResults) {
                        $Group.FirstLsn = [BigInt]$group.FirstLSN.ToString()
                        $Group.CheckpointLSN = [BigInt]$group.CheckpointLSN.ToString()
                        $Group.DatabaseBackupLsn = [BigInt]$group.DatabaseBackupLsn.ToString()
                        $Group.LastLsn = [BigInt]$group.LastLsn.ToString()
                    }
                } else {
                    Write-Message -Message "$f does not exist or is unreadable" -Level Warning
                }
            }
        } else {
            $Files = @()
            $groupResults = @()
            if ($Path[0] -match 'http') { $NoXpDirTree = $true }
            if ($NoXpDirTree -ne $true) {
                foreach ($f in $path) {
                    if ([System.IO.Path]::GetExtension($f).Length -gt 1) {
                        if ("Fullname" -notin $f.PSobject.Properties.name) {
                            $f = $f | Select-Object *, @{ Name = "FullName"; Expression = { $f } }
                        }
                        Write-Message -Message "Testing a single file $f " -Level Verbose
                        if ((Test-DbaPath -Path $f.fullname -SqlInstance $server)) {
                            $files += $f
                        } else {
                            Write-Message -Level Verbose -Message "$server cannot 'see' file $($f.FullName)"
                        }
                    } elseif ($True -eq $MaintenanceSolution) {
                        if ($true -eq $IgnoreLogBackup -and [System.IO.Path]::GetDirectoryName($f) -like '*LOG') {
                            Write-Message -Level Verbose -Message "Skipping Log Backups as requested"
                        } else {
                            Write-Message -Level Verbose -Message "OLA - Getting folder contents"
                            $Files += Get-XpDirTreeRestoreFile -Path $f -SqlInstance $server
                        }
                    } else {
                        Write-Message -Message "Testing a folder $f" -Level Verbose
                        $Files += $Check = Get-XpDirTreeRestoreFile -Path $f -SqlInstance $server
                        if ($null -eq $check) {
                            Write-Message -Message "Nothing returned from $f" -Level Verbose
                        }
                    }
                }
            } else {
                ForEach ($f in $path) {
                    Write-Message -Level VeryVerbose -Message "Not using sql for $f"
                    if ($f -is [System.IO.FileSystemInfo]) {
                        if ($f.PsIsContainer -eq $true -and $true -ne $MaintenanceSolution) {
                            Write-Message -Level VeryVerbose -Message "folder $($f.fullname)"
                            $Files += Get-ChildItem -Path $f.fullname -File -Recurse:$DirectoryRecurse
                        } elseif ($f.PsIsContainer -eq $true -and $true -eq $MaintenanceSolution) {
                            if ($IgnoreLogBackup -and $f -notlike '*LOG' ) {
                                Write-Message -Level Verbose -Message "Skipping Log backups for Maintenance backups"
                            } else {
                                $Files += Get-ChildItem -Path $f.fullname -File -Recurse:$DirectoryRecurse
                            }
                        } elseif ($true -eq $MaintenanceSolution) {
                            $Files += Get-ChildItem -Path $f.fullname -Recurse:$DirectoryRecurse
                        } else {
                            Write-Message -Level VeryVerbose -Message "File"
                            $Files += $f.fullname
                        }
                    } else {
                        if ($true -eq $MaintenanceSolution) {
                            $Files += Get-XpDirTreeRestoreFile -Path $f\FULL -SqlInstance $server -NoRecurse
                            $Files += Get-XpDirTreeRestoreFile -Path $f\DIFF -SqlInstance $server -NoRecurse
                            $Files += Get-XpDirTreeRestoreFile -Path $f\LOG -SqlInstance $server -NoRecurse
                        } else {
                            Write-Message -Level VeryVerbose -Message "File"
                            $Files += $f
                        }
                    }
                }
            }

            if ($True -eq $MaintenanceSolution -and $True -eq $IgnoreLogBackup) {
                Write-Message -Level Verbose -Message "Skipping Log Backups as requested"
                $Files = $Files | Where-Object {$_.FullName -notlike '*\LOG\*'}
            }

            Write-Message -Level Verbose -Message "Reading backup headers of $($Files.Count) files"
            try {
                $FileDetails = Read-DbaBackupHeader -SqlInstance $server -Path $Files -AzureCredential $AzureCredential -EnableException
            } catch {
                Stop-Function -Message "Failure reading backup header" -ErrorRecord $_ -Target $server -Continue
            }

            $groupdetails = $FileDetails | Group-Object -Property BackupSetGUID

            foreach ($Group in $GroupDetails) {
                $dblsn = $group.Group[0].DatabaseBackupLSN
                if (-not $dblsn) {
                    $dblsn = 0
                }
                $description = $group.Group[0].BackupTypeDescription
                if (-not $description) {
                    $header = Read-DbaBackupHeader -SqlInstance $server -Path $Path | Select-Object -First 1
                    $description = switch ($header.BackupType) {
                        1 { "Full" }
                        2 { "Differential" }
                        3 { "Log"}
                    }
                }
                $historyObject = New-Object Sqlcollaborative.Dbatools.Database.BackupHistory
                $historyObject.ComputerName = $group.group[0].MachineName
                $historyObject.InstanceName = $group.group[0].ServiceName
                $historyObject.SqlInstance = $group.group[0].ServerName
                $historyObject.Database = $group.Group[0].DatabaseName
                $historyObject.UserName = $group.Group[0].UserName
                $historyObject.Start = [DateTime]$group.Group[0].BackupStartDate
                $historyObject.End = [DateTime]$group.Group[0].BackupFinishDate
                $historyObject.Duration = ([DateTime]$group.Group[0].BackupFinishDate - [DateTime]$group.Group[0].BackupStartDate)
                $historyObject.Path = [string[]]$Group.Group.BackupPath
                $historyObject.FileList = ($group.Group.FileList | Select-Object Type, LogicalName, PhysicalName)
                $historyObject.TotalSize = ($Group.Group.BackupSize.Byte | Measure-Object -Sum).Sum
                $HistoryObject.CompressedBackupSize = ($Group.Group.CompressedBackupSize.Byte | Measure-Object -Sum).Sum
                $historyObject.Type = $description
                $historyObject.BackupSetId = $group.group[0].BackupSetGUID
                $historyObject.DeviceType = 'Disk'
                $historyObject.FullName = $Group.Group.BackupPath
                $historyObject.Position = $group.Group[0].Position
                $historyObject.FirstLsn = $group.Group[0].FirstLSN
                $historyObject.DatabaseBackupLsn = $dblsn
                $historyObject.CheckpointLSN = $group.Group[0].CheckpointLSN
                $historyObject.LastLsn = $group.Group[0].LastLsn
                $historyObject.SoftwareVersionMajor = $group.Group[0].SoftwareVersionMajor
                $historyObject.RecoveryModel = $group.Group.RecoveryModel
                $groupResults += $historyObject
            }
        }
        if (Test-Bound 'SourceInstance') {
            $groupResults = $groupResults | Where-Object {$_.InstanceName -in $SourceInstance}
        }

        if (Test-Bound 'DatabaseName') {
            $groupResults = $groupResults | Where-Object {$_.Database -in $DatabaseName}
        }
        if ($true -eq $Anonymise) {
            foreach ($group in $GroupResults) {
                $group.ComputerName = Get-HashString -InString $group.ComputerName
                $group.InstanceName = Get-HashString -InString $group.InstanceName
                $group.SqlInstance = Get-HashString -InString $group.SqlInstance
                $group.Database = Get-HashString -InString $group.Database
                $group.UserName = Get-HashString -InString $group.UserName
                $group.Path = Get-HashString -InString  $Group.Path
                $group.FullName = Get-HashString -InString $Group.Fullname
                $group.FileList = ($group.FileList | Select-Object Type,
                    @{Name = "LogicalName"; Expression = {Get-HashString -InString $_."LogicalName"}},
                    @{Name = "PhysicalName"; Expression = {Get-HashString -InString $_."PhysicalName"}})
            }
        }
        if ((Test-Bound -parameterName exportpath) -and $null -ne $ExportPath) {
            $groupResults | Export-CliXml -Path $ExportPath -Depth 5 -NoClobber:$NoClobber
            if ($true -ne $PassThru) {
                return
            }
        }
        $groupResults | Sort-Object -Property End -Descending
    }
}

tools\dbatools\functions\Get-DbaBuildReference.ps1

#ValidationTags#CodeStyle,Messaging,FlowControl,Pipeline#
function Get-DbaBuildReference {
    <#
    .SYNOPSIS
        Returns SQL Server Build infos on a SQL instance

    .DESCRIPTION
        Returns info about the specific build of a SQL instance, including the SP, the CU and the reference KB, wherever possible.
        It also includes End Of Support dates as specified on Microsoft Life Cycle Policy

    .PARAMETER Build
        Instead of connecting to a real instance, pass a string identifying the build to get the info back.

    .PARAMETER Kb
        Get a KB information based on its number. Supported format: KBXXXXXX, or simply XXXXXX.

    .PARAMETER MajorVersion
        Get a KB information based on SQL Server version. Can be refined further by -ServicePack and -CumulativeUpdate parameters.
        Examples: SQL2008 | 2008R2 | 2016

    .PARAMETER ServicePack
        Get a KB information based on SQL Server Service Pack version. Can be refined further by -CumulativeUpdate parameter.
        Examples: SP0 | 2 | RTM

    .PARAMETER CumulativeUpdate
        Get a KB information based on SQL Server Cumulative Update version.
         Examples: CU0 | CU13 | CU0

    .PARAMETER SqlInstance
        Target any number of instances, in order to return their build state.

    .PARAMETER SqlCredential
        When connecting to an instance, use the credentials specified.

    .PARAMETER Update
        Looks online for the most up to date reference, replacing the local one.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: SqlBuild
        Author: Simone Bizzotto (@niphold) | Friedrich Weinmann (@FredWeinmann)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaBuildReference

    .EXAMPLE
        PS C:\> Get-DbaBuildReference -Build "12.00.4502"

        Returns information about a build identified by  "12.00.4502" (which is SQL 2014 with SP1 and CU11)

    .EXAMPLE
        PS C:\> Get-DbaBuildReference -Build "12.00.4502" -Update

        Returns information about a build trying to fetch the most up to date index online. When the online version is newer, the local one gets overwritten

    .EXAMPLE
        PS C:\> Get-DbaBuildReference -Build "12.0.4502","10.50.4260"

        Returns information builds identified by these versions strings

    .EXAMPLE
        PS C:\> Get-DbaCmsRegServer -SqlInstance sqlserver2014a | Get-DbaBuildReference

        Integrate with other cmdlets to have builds checked for all your registered servers on sqlserver2014a

    #>
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseShouldProcessForStateChangingFunctions", "")]
    [CmdletBinding(DefaultParameterSetName = 'Build')]
    param (
        [version[]]
        $Build,

        [string[]]
        $Kb,

        [ValidateNotNullOrEmpty()]
        [string]
        $MajorVersion,

        [ValidateNotNullOrEmpty()]
        [string]
        [Alias('SP')]
        $ServicePack = 'RTM',

        [string]
        [Alias('CU')]
        $CumulativeUpdate,

        [Parameter(ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]
        $SqlInstance,

        [Alias("Credential")]
        [PsCredential]
        $SqlCredential,

        [switch]
        $Update,

        [switch]
        [Alias('Silent')]
        $EnableException
    )

    begin {
        #region verifying parameters
        $ComplianceSpec = @()
        $ComplianceSpecExclusiveParams = @('Build', 'Kb', @( 'MajorVersion', 'ServicePack', 'CumulativeUpdate'), 'SqlInstance')
        foreach ($exclParamGroup in $ComplianceSpecExclusiveParams) {
            foreach ($exclParam in $exclParamGroup) {
                if (Test-Bound -Parameter $exclParam) {
                    $ComplianceSpec += $exclParam
                    break
                }
            }
        }
        if ($ComplianceSpec.Length -gt 1) {
            Stop-Function -Category InvalidArgument -Message "$($ComplianceSpec -join ', ') are mutually exclusive. Please choose one or the other. Quitting."
            return
        }
        if ($ComplianceSpec.Length -eq 0) {
            Stop-Function -Category InvalidArgument -Message "You need to choose at least one parameter."
            return
        }
        if (((Test-Bound -Parameter ServicePack) -or (Test-Bound -Parameter CumulativeUpdate)) -and (Test-Bound -Not -Parameter MajorVersion)) {
            Stop-Function -Category InvalidArgument -Message "-MajorVersion is required when specifying SP or CU."
            return
        }
        if ($MajorVersion) {
            if ($MajorVersion -match '^(SQL)?(\d{4}(R2)?)$') {
                $MajorVersion = $Matches[2]
            } else {
                Stop-Function -Message "Incorrect SQL Server version format: use SQL2XXX or just 2XXXX - SQL2012, SQL2008R2"
                return
            }
            if (!$ServicePack) {
                $ServicePack = 'RTM'
            }
            if ($ServicePack -match '^(SP)?\s*(\d+)$') {
                if ($Matches[2] -eq '0') {
                    $ServicePack = 'RTM'
                } else {
                    $ServicePack = 'SP' + $Matches[2]
                }
            } elseif ($ServicePack -notmatch '^RTM$') {
                Stop-Function -Message "Incorrect SQL Server service pack format: use SPX, X or RTM, where X is a service pack number"
                return
            }
            if ($CumulativeUpdate) {
                if ($CumulativeUpdate -match '^(CU)?\s*(\d+)$') {
                    if ($Matches[2] -eq '0') {
                        $CumulativeUpdate = ''
                    } else {
                        $CumulativeUpdate = 'CU' + $Matches[2]
                    }
                } else {
                    Stop-Function -Message "Incorrect SQL Server cumulative update format: use CUX or X, where X is a cumulative update number"
                    return
                }
            }
        }
        #endregion verifying parameters
        #region Helper functions
        function Get-DbaBuildReferenceIndex {
            [CmdletBinding()]
            param (
                [string]
                $Moduledirectory,

                [bool]
                $Update,

                [bool]
                $EnableException
            )

            $orig_idxfile = "$Moduledirectory\bin\dbatools-buildref-index.json"
            $DbatoolsData = Get-DbatoolsConfigValue -Name 'Path.DbatoolsData'
            $writable_idxfile = Join-Path $DbatoolsData "dbatools-buildref-index.json"

            if (-not (Test-Path $orig_idxfile)) {
                Write-Message -Level Warning -Message "Unable to read local SQL build reference file. Check your module integrity!"
            }

            if ((-not (Test-Path $orig_idxfile)) -and (-not (Test-Path $writable_idxfile))) {
                throw "Build reference file not found, check module health!"
            }

            # If no writable copy exists, create one and return the module original
            if (-not (Test-Path $writable_idxfile)) {
                Copy-Item -Path $orig_idxfile -Destination $writable_idxfile -Force -ErrorAction Stop
                $result = Get-Content $orig_idxfile -Raw | ConvertFrom-Json
            }

            # Else, if both exist, update the writeable if necessary and return the current version
            elseif (Test-Path $orig_idxfile) {
                $module_content = Get-Content $orig_idxfile -Raw | ConvertFrom-Json
                $data_content = Get-Content $writable_idxfile -Raw | ConvertFrom-Json

                $module_time = Get-Date $module_content.LastUpdated
                $data_time = Get-Date $data_content.LastUpdated

                $offline_time = $module_time
                if ($module_time -gt $data_time) {
                    Copy-Item -Path $orig_idxfile -Destination $writable_idxfile -Force -ErrorAction Stop
                    $result = $module_content
                } else {
                    $result = $data_content
                    $offline_time = $data_time
                }
                # If Update is passed, try to fetch from online resource and store into the writeable
                if ($Update) {
                    $WebContent = Get-DbaBuildReferenceIndexOnline -EnableException $EnableException
                    if ($null -ne $WebContent) {
                        $webdata_content = $WebContent.Content | ConvertFrom-Json
                        $webdata_time = Get-Date $webdata_content.LastUpdated
                        if ($webdata_time -gt $offline_time) {
                            Write-Message -Level Output -Message "Index updated correctly, last update on: $(Get-Date -Date $webdata_time -Format s), was $(Get-Date -Date $offline_time -Format s)"
                            $WebContent.Content | Out-File $writable_idxfile -Encoding utf8 -ErrorAction Stop
                            $result = Get-Content $writable_idxfile -Raw | ConvertFrom-Json
                        }
                    }
                }
            }

            # Else if the module version of the file no longer exists, but the writable version exists, return the writable version
            else {
                $result = Get-Content $writable_idxfile -Raw | ConvertFrom-Json
            }

            $LastUpdated = Get-Date -Date $result.LastUpdated
            if ($LastUpdated -lt (Get-Date).AddDays(-45)) {
                Write-Message -Level Warning -Message "Index is stale, last update on: $(Get-Date -Date $LastUpdated -Format s), try the -Update parameter to fetch the most up to date index"
            }

            $result.Data | Select-Object @{ Name = "VersionObject"; Expression = { [version]$_.Version } }, *
        }

        function Get-DbaBuildReferenceIndexOnline {
            [CmdletBinding()]
            param (
                [bool]
                $EnableException
            )
            $url = Get-DbatoolsConfigValue -Name 'assets.sqlbuildreference'
            try {
                $WebContent = Invoke-TlsWebRequest $url -ErrorAction Stop
            } catch {
                try {
                    Write-Message -Level Verbose -Message "Probably using a proxy for internet access, trying default proxy settings"
                    (New-Object System.Net.WebClient).Proxy.Credentials = [System.Net.CredentialCache]::DefaultNetworkCredentials
                    $WebContent = Invoke-TlsWebRequest $url -ErrorAction Stop
                } catch {
                    Write-Message -Level Warning -Message "Couldn't download updated index from $url"
                    return
                }
            }
            return $WebContent
        }

        function Resolve-DbaBuild {
            [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseShouldProcessForStateChangingFunctions", "")]
            [CmdletBinding()]
            [OutputType([System.Collections.Hashtable])]
            param (
                [Parameter(Mandatory, ParameterSetName = 'Build')]
                [version]
                $Build,

                [Parameter(Mandatory, ParameterSetName = 'KB')]
                [string]
                $Kb,

                [Parameter(Mandatory, ParameterSetName = 'HFLevel')]
                [string]
                $MajorVersion,

                [Parameter(ParameterSetName = 'HFLevel')]
                [string]
                [Alias('SP')]
                $ServicePack = 'RTM',

                [Parameter(ParameterSetName = 'HFLevel')]
                [string]
                [Alias('CU')]
                $CumulativeUpdate,

                $Data,

                [bool]
                $EnableException
            )

            if ($Build) {
                Write-Message -Level Verbose -Message "Looking for $Build"

                $IdxVersion = $Data | Where-Object Version -like "$($Build.Major).$($Build.Minor).*"
            } elseif ($Kb) {
                Write-Message -Level Verbose -Message "Looking for KB $Kb"
                if ($Kb -match '^(KB)?(\d+)$') {
                    $currentKb = $Matches[2]
                    $kbVersion = $Data | Where-Object KBList -contains $currentKb
                    $IdxVersion = $Data | Where-Object Version -like "$($kbVersion.VersionObject.Major).$($kbVersion.VersionObject.Minor).*"
                } else {
                    Stop-Function -Message "Wrong KB name $kb"
                    return
                }
            } elseif ($MajorVersion) {
                Write-Message -Level Verbose -Message "Looking for SQL $MajorVersion SP $ServicePack CU $CumulativeUpdate"
                $kbVersion = $Data | Where-Object Name -eq $MajorVersion
                $IdxVersion = $Data | Where-Object Version -like "$($kbVersion.VersionObject.Major).$($kbVersion.VersionObject.Minor).*"
            }

            $Detected = @{ }
            $Detected.MatchType = 'Approximate'
            $idxCount = $IdxVersion | Measure-Object | Select-Object -ExpandProperty Count
            Write-Message -Level Verbose -Message "We have $idxCount builds in store for this Release"
            If ($idxCount -eq 0) {
                Write-Message -Level Warning -Message "No info in store for this Release"
                $Detected.Warning = "No info in store for this Release"
            } else {
                $LastVer = $IdxVersion[0]
            }
            foreach ($el in $IdxVersion) {
                if ($null -ne $el.Name) {
                    $Detected.Name = $el.Name
                }
                if ($Build -and $el.VersionObject -gt $Build) {
                    $Detected.MatchType = 'Approximate'
                    $Detected.Warning = "$Build not found, closest build we have is $($LastVer.Version)"
                    break
                }
                $LastVer = $el
                $Detected.BuildLevel = $el.VersionObject
                if ($null -ne $el.SP) {
                    $Detected.SP = $el.SP
                    $Detected.CU = $null
                }
                if ($null -ne $el.CU) {
                    $Detected.CU = $el.CU
                }
                if ($null -ne $el.SupportedUntil) {
                    $Detected.SupportedUntil = (Get-Date -date $el.SupportedUntil)
                }
                $Detected.Build = $el.Version
                $Detected.KB = $el.KBList
                if (($Build -and $el.Version -eq $Build) -or ($Kb -and $el.KBList -eq $currentKb)) {
                    $Detected.MatchType = 'Exact'
                    break
                } elseif ($MajorVersion -and $Detected.SP -contains $ServicePack -and (!$CumulativeUpdate -or ($el.CU -and $el.CU -eq $CumulativeUpdate))) {
                    $Detected.MatchType = 'Exact'
                    break
                }
            }
            return $Detected
        }
        #endregion Helper functions

        $moduledirectory = $MyInvocation.MyCommand.Module.ModuleBase

        try {
            $IdxRef = Get-DbaBuildReferenceIndex -Moduledirectory $moduledirectory -Update $Update -EnableException $EnableException
        } catch {
            Stop-Function -Message "Error loading SQL build reference" -ErrorRecord $_
            return
        }
    }
    process {
        if (Test-FunctionInterrupt) { return }

        foreach ($instance in $SqlInstance) {
            #region Ensure the connection is established
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failed to process Instance $Instance" -ErrorRecord $_ -Target $instance -Continue
            }

            try {
                $null = $server.Version.ToString()
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }
            #endregion Ensure the connection is established

            $Detected = Resolve-DbaBuild -Build $server.Version -Data $IdxRef -EnableException $EnableException

            [PSCustomObject]@{
                SqlInstance    = $server.DomainInstanceName
                Build          = $server.Version
                NameLevel      = $Detected.Name
                SPLevel        = $Detected.SP
                CULevel        = $Detected.CU
                KBLevel        = $Detected.KB
                BuildLevel     = $Detected.BuildLevel
                SupportedUntil = $Detected.SupportedUntil
                MatchType      = $Detected.MatchType
                Warning        = $Detected.Warning
            }
        }

        foreach ($buildstr in $Build) {
            $Detected = Resolve-DbaBuild -Build $buildstr -Data $IdxRef -EnableException $EnableException

            [PSCustomObject]@{
                SqlInstance    = $null
                Build          = $buildstr
                NameLevel      = $Detected.Name
                SPLevel        = $Detected.SP
                CULevel        = $Detected.CU
                KBLevel        = $Detected.KB
                BuildLevel     = $Detected.BuildLevel
                SupportedUntil = $Detected.SupportedUntil
                MatchType      = $Detected.MatchType
                Warning        = $Detected.Warning
            } | Select-DefaultView -ExcludeProperty SqlInstance
        }

        foreach ($kbItem in $Kb) {
            $Detected = Resolve-DbaBuild -Kb $kbItem -Data $IdxRef -EnableException $EnableException

            [PSCustomObject]@{
                SqlInstance    = $null
                Build          = $Detected.Build
                NameLevel      = $Detected.Name
                SPLevel        = $Detected.SP
                CULevel        = $Detected.CU
                KBLevel        = $Detected.KB
                BuildLevel     = $Detected.BuildLevel
                SupportedUntil = $Detected.SupportedUntil
                MatchType      = $Detected.MatchType
                Warning        = $Detected.Warning
            } | Select-DefaultView -ExcludeProperty SqlInstance
        }

        if ($MajorVersion) {
            $Detected = Resolve-DbaBuild -MajorVersion $MajorVersion -ServicePack $ServicePack -CumulativeUpdate $CumulativeUpdate -Data $IdxRef -EnableException $EnableException

            [PSCustomObject]@{
                SqlInstance    = $null
                Build          = $Detected.Build
                NameLevel      = $Detected.Name
                SPLevel        = $Detected.SP
                CULevel        = $Detected.CU
                KBLevel        = $Detected.KB
                BuildLevel     = $Detected.BuildLevel
                SupportedUntil = $Detected.SupportedUntil
                MatchType      = $Detected.MatchType
                Warning        = $Detected.Warning
            } | Select-DefaultView -ExcludeProperty SqlInstance
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Get-DbaSqlBuildReference
    }
}

tools\dbatools\functions\Get-DbaClientAlias.ps1

function Get-DbaClientAlias {
    <#
    .SYNOPSIS
        Gets any SQL Server alias for the specified server(s)

    .DESCRIPTION
        Gets SQL Server alias by reading HKLM:\SOFTWARE\Microsoft\MSSQLServer\Client

    .PARAMETER ComputerName
        The target computer where the alias has been created

    .PARAMETER Credential
        Allows you to login to remote computers using alternative credentials

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Alias
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaClientAlias

    .EXAMPLE
        PS C:\> Get-DbaClientAlias

        Gets all SQL Server client aliases on the local computer

    .EXAMPLE
        PS C:\> Get-DbaClientAlias -ComputerName workstationx

        Gets all SQL Server client aliases on Workstationx

    .EXAMPLE
        PS C:\> Get-DbaClientAlias -ComputerName workstationx -Credential ad\sqldba

        Logs into workstationx as ad\sqldba then retrieves all SQL Server client aliases on Workstationx

    .EXAMPLE
        PS C:\> 'Server1', 'Server2' | Get-DbaClientAlias

        Gets all SQL Server client aliases on Server1 and Server2

    #>
    [CmdletBinding()]
    param (
        [Parameter(ValueFromPipeline)]
        [DbaInstanceParameter[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ($computer in $ComputerName) {
            $scriptblock = {

                function Get-ItemPropertyValue {
                    param (
                        [parameter()]
                        [String]$Path,
                        [parameter()]
                        [String]$Name
                    )
                    (Get-ItemProperty -LiteralPath $Path -Name $Name).$Name
                }

                $basekeys = "HKLM:\SOFTWARE\WOW6432Node\Microsoft\MSSQLServer", "HKLM:\SOFTWARE\Microsoft\MSSQLServer"

                foreach ($basekey in $basekeys) {

                    if ((Test-Path $basekey) -eq $false) {
                        <# DO NOT use Write-Message as this is inside of a script block #>
                        Write-Warning "Base key ($basekey) does not exist. Quitting."
                        continue
                    }

                    $client = "$basekey\Client"

                    if ((Test-Path $client) -eq $false) {
                        continue
                    }

                    $connect = "$client\ConnectTo"

                    if ((Test-Path $connect) -eq $false) {
                        continue
                    }

                    if ($basekey -like "*WOW64*") {
                        $architecture = "32-bit"
                    } else {
                        $architecture = "64-bit"
                    }

                    # "Get SQL Server alias for $ComputerName for $architecture"
                    $all = Get-Item -Path $connect
                    foreach ($entry in $all.Property) {
                        $value = Get-ItemPropertyValue -Path $connect -Name $entry
                        $clean = $value.Replace('DBNMPNTW,', '').Replace('DBMSSOCN,', '')
                        if ($value.StartsWith('DBMSSOCN')) { $protocol = 'TCP/IP' } else { $protocol = 'Named Pipes' }

                        [pscustomobject]@{
                            ComputerName   = $env:COMPUTERNAME
                            NetworkLibrary = $protocol
                            ServerName     = $clean
                            AliasName      = $entry
                            AliasString    = $value
                            Architecture   = $architecture
                        }
                    }
                }
            }

            try {
                Invoke-Command2 -ComputerName $computer -Credential $Credential -ScriptBlock $scriptblock -ErrorAction Stop |
                    Select-DefaultView -Property ComputerName, Architecture, NetworkLibrary, ServerName, AliasName
            } catch {
                Stop-Function -Message "Failure" -ErrorRecord $_ -Target $computer -Continue
            }
        }
    }
}

tools\dbatools\functions\Get-DbaClientProtocol.ps1

function Get-DbaClientProtocol {
    <#
    .SYNOPSIS
        Gets the SQL Server related client protocols on a computer.

    .DESCRIPTION
        Gets the SQL Server related client protocols on one or more computers.

        Requires Local Admin rights on destination computer(s).
        The client protocols can be enabled and disabled when retrieved via WSMan.

    .PARAMETER ComputerName
        The target SQL Server instance or instances.

    .PARAMETER Credential
        Credential object used to connect to the computer as a different user.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Protocol
        Author: Klaas Vandenberghe (@PowerDBAKlaas)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaClientProtocol

    .EXAMPLE
        PS C:\> Get-DbaClientProtocol -ComputerName sqlserver2014a

        Gets the SQL Server related client protocols on computer sqlserver2014a.

    .EXAMPLE
        PS C:\> 'sql1','sql2','sql3' | Get-DbaClientProtocol

        Gets the SQL Server related client protocols on computers sql1, sql2 and sql3.

    .EXAMPLE
        PS C:\> Get-DbaClientProtocol -ComputerName sql1,sql2 | Out-GridView

        Gets the SQL Server related client protocols on computers sql1 and sql2, and shows them in a grid view.

    .EXAMPLE
        PS C:\> (Get-DbaClientProtocol -ComputerName sql2 | Where { $_.DisplayName = 'via' }).Disable()

        Disables the VIA ClientNetworkProtocol on computer sql2.
        If successful, return code 0 is shown.

    #>
    [CmdletBinding()]
    param (
        [parameter(ValueFromPipeline)]
        [Alias("cn", "host", "Server")]
        [DbaInstanceParameter[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential] $Credential,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ( $computer in $ComputerName.ComputerName ) {
            $server = Resolve-DbaNetworkName -ComputerName $computer -Credential $credential
            if ( $server.FullComputerName ) {
                $computer = $server.FullComputerName
                Write-Message -Level Verbose -Message "Getting SQL Server namespace on $computer"
                $namespace = Get-DbaCmObject -ComputerName $computer -Namespace root\Microsoft\SQLServer -Query "Select * FROM __NAMESPACE WHERE Name LIke 'ComputerManagement%'" -ErrorAction SilentlyContinue |
                    Where-Object {(Get-DbaCmObject -ComputerName $computer -Namespace $("root\Microsoft\SQLServer\" + $_.Name) -ClassName ClientNetworkProtocol -ErrorAction SilentlyContinue).count -gt 0} |
                    Sort-Object Name -Descending | Select-Object -First 1

                if ( $namespace.Name ) {
                    Write-Message -Level Verbose -Message "Getting Cim class ClientNetworkProtocol in Namespace $($namespace.Name) on $computer"
                    try {
                        $prot = Get-DbaCmObject -ComputerName $computer -Namespace $("root\Microsoft\SQLServer\" + $namespace.Name) -ClassName ClientNetworkProtocol -ErrorAction SilentlyContinue

                        $prot | Add-Member -Force -MemberType ScriptProperty -Name IsEnabled -Value { switch ( $this.ProtocolOrder ) { 0 { $false } default { $true } } }
                        $prot | Add-Member -Force -MemberType ScriptMethod -Name Enable -Value {Invoke-CimMethod -MethodName SetEnable -InputObject $this }
                        $prot | Add-Member -Force -MemberType ScriptMethod -Name Disable -Value {Invoke-CimMethod -MethodName SetDisable -InputObject $this }

                        foreach ( $protocol in $prot ) {
                            Select-DefaultView -InputObject $protocol -Property 'PSComputerName as ComputerName', 'ProtocolDisplayName as DisplayName', 'ProtocolDll as DLL', 'ProtocolOrder as Order', 'IsEnabled'
                        }
                    } catch {
                        Write-Message -Level Warning -Message "No Sql ClientNetworkProtocol found on $computer"
                    }
                } #if namespace
                else {
                    Write-Message -Level Warning -Message "No ComputerManagement Namespace on $computer. Please note that this function is available from SQL 2005 up."
                } #else no namespace
            } #if computername
            else {
                Write-Message -Level Warning -Message "Failed to connect to $computer"
            }
        } #foreach computer
    }
}

tools\dbatools\functions\Find-DbaStoredProcedure.ps1

function Find-DbaStoredProcedure {
    <#
    .SYNOPSIS
        Returns all stored procedures that contain a specific case-insensitive string or regex pattern.

    .DESCRIPTION
        This function can either run against specific databases or all databases searching all user or user and system stored procedures.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto-populated from the server

    .PARAMETER Pattern
        String pattern that you want to search for in the stored procedure text body

    .PARAMETER IncludeSystemObjects
        By default, system stored procedures are ignored but you can include them within the search using this parameter.

        Warning - this will likely make it super slow if you run it on all databases.

    .PARAMETER IncludeSystemDatabases
        By default system databases are ignored but you can include them within the search using this parameter

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: StoredProcedure, Proc
        Author: Stephen Bennett, https://sqlnotesfromtheunderground.wordpress.com/

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Find-DbaStoredProcedure

    .EXAMPLE
        PS C:\> Find-DbaStoredProcedure -SqlInstance DEV01 -Pattern whatever

        Searches all user databases stored procedures for "whatever" in the text body

    .EXAMPLE
        PS C:\> Find-DbaStoredProcedure -SqlInstance sql2016 -Pattern '\w+@\w+\.\w+'

        Searches all databases for all stored procedures that contain a valid email pattern in the text body

    .EXAMPLE
        PS C:\> Find-DbaStoredProcedure -SqlInstance DEV01 -Database MyDB -Pattern 'some string' -Verbose

        Searches in "mydb" database stored procedures for "some string" in the text body

    .EXAMPLE
        PS C:\> Find-DbaStoredProcedure -SqlInstance sql2016 -Database MyDB -Pattern RUNTIME -IncludeSystemObjects

        Searches in "mydb" database stored procedures for "runtime" in the text body

    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "SqlServers")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [parameter(Mandatory)]
        [string]$Pattern,
        [switch]$IncludeSystemObjects,
        [switch]$IncludeSystemDatabases,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        $sql = "SELECT OBJECT_SCHEMA_NAME(p.object_id) as ProcSchema, p.name, m.definition as TextBody FROM sys.sql_modules m, sys.procedures p WHERE m.object_id = p.object_id"
        if (!$IncludeSystemObjects) { $sql = "$sql AND p.is_ms_shipped = 0" }
        $everyserverspcount = 0
    }
    process {
        foreach ($Instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $Instance -SqlCredential $SqlCredential
            } catch {
                Write-Message -Level Warning -Message "Failed to connect to: $Instance"
                continue
            }

            if ($server.versionMajor -lt 9) {
                Write-Message -Level Warning -Message "This command only supports SQL Server 2005 and above."
                Continue
            }

            if ($IncludeSystemDatabases) {
                $dbs = $server.Databases | Where-Object { $_.Status -eq "normal" }
            } else {
                $dbs = $server.Databases | Where-Object { $_.Status -eq "normal" -and $_.IsSystemObject -eq $false }
            }

            if ($Database) {
                $dbs = $dbs | Where-Object Name -In $Database
            }

            if ($ExcludeDatabase) {
                $dbs = $dbs | Where-Object Name -NotIn $ExcludeDatabase
            }

            $totalcount = 0
            $dbcount = $dbs.count
            foreach ($db in $dbs) {
                Write-Message -Level Verbose -Message "Searching on database $db"

                # If system objects aren't needed, find stored procedure text using SQL
                # This prevents SMO from having to enumerate

                if (!$IncludeSystemObjects) {
                    Write-Message -Level Debug -Message $sql
                    $rows = $db.ExecuteWithResults($sql).Tables.Rows
                    $sproccount = 0

                    foreach ($row in $rows) {
                        $totalcount++; $sproccount++; $everyserverspcount++

                        $procSchema = $row.ProcSchema
                        $proc = $row.Name

                        Write-Message -Level Verbose -Message "Looking in stored procedure: $procSchema.$proc textBody for $pattern"
                        if ($row.TextBody -match $Pattern) {
                            $sp = $db.StoredProcedures | Where-Object {$_.Schema -eq $procSchema -and $_.Name -eq $proc}

                            $StoredProcedureText = $sp.TextBody.split("`n")
                            $spTextFound = $StoredProcedureText | Select-String -Pattern $Pattern | ForEach-Object { "(LineNumber: $($_.LineNumber)) $($_.ToString().Trim())" }

                            [PSCustomObject]@{
                                ComputerName             = $server.ComputerName
                                SqlInstance              = $server.ServiceName
                                Database                 = $db.Name
                                Schema                   = $sp.Schema
                                Name                     = $sp.Name
                                Owner                    = $sp.Owner
                                IsSystemObject           = $sp.IsSystemObject
                                CreateDate               = $sp.CreateDate
                                LastModified             = $sp.DateLastModified
                                StoredProcedureTextFound = $spTextFound -join "`n"
                                StoredProcedure          = $sp
                                StoredProcedureFullText  = $sp.TextBody
                            } | Select-DefaultView -ExcludeProperty StoredProcedure, StoredProcedureFullText
                        }
                    }
                } else {
                    $storedprocedures = $db.StoredProcedures

                    foreach ($sp in $storedprocedures) {
                        $totalcount++; $sproccount++; $everyserverspcount++

                        $procSchema = $sp.Schema
                        $proc = $sp.Name

                        Write-Message -Level Verbose -Message "Looking in stored procedure $procSchema.$proc textBody for $pattern"
                        if ($sp.TextBody -match $Pattern) {

                            $StoredProcedureText = $sp.TextBody.split("`n")
                            $spTextFound = $StoredProcedureText | Select-String -Pattern $Pattern | ForEach-Object { "(LineNumber: $($_.LineNumber)) $($_.ToString().Trim())" }

                            [PSCustomObject]@{
                                ComputerName             = $server.ComputerName
                                SqlInstance              = $server.ServiceName
                                Database                 = $db.Name
                                Schema                   = $sp.Schema
                                Name                     = $sp.Name
                                Owner                    = $sp.Owner
                                IsSystemObject           = $sp.IsSystemObject
                                CreateDate               = $sp.CreateDate
                                LastModified             = $sp.DateLastModified
                                StoredProcedureTextFound = $spTextFound -join "`n"
                                StoredProcedure          = $sp
                                StoredProcedureFullText  = $sp.TextBody
                            } | Select-DefaultView -ExcludeProperty StoredProcedure, StoredProcedureFullText
                        }
                    }
                }
                Write-Message -Level Verbose -Message "Evaluated $sproccount stored procedures in $db"
            }
            Write-Message -Level Verbose -Message "Evaluated $totalcount total stored procedures in $dbcount databases"
        }
    }
    end {
        Write-Message -Level Verbose -Message "Evaluated $everyserverspcount total stored procedures"
    }
}

tools\dbatools\functions\Get-DbaCmObject.ps1

function Get-DbaCmObject {
    <#
    .SYNOPSIS
        Retrieves Wmi/Cim-Style information from computers.

    .DESCRIPTION
        This function centralizes all requests for information retrieved from Get-WmiObject or Get-CimInstance.
        It uses different protocols as available in this order:
        - Cim over WinRM
        - Cim over DCOM
        - Wmi
        - Wmi over PowerShell Remoting
        It remembers channels that didn't work and will henceforth avoid them. It remembers invalid credentials and will avoid reusing them.
        Much of its behavior can be configured using Test-DbaCmConnection.

    .PARAMETER ClassName
        The name of the class to retrieve.

    .PARAMETER Query
        The Wmi/Cim query tu run against the server.

    .PARAMETER ComputerName
        The computer(s) to connect to. Defaults to localhost.

    .PARAMETER Credential
        Credentials to use. Invalid credentials will be stored in a credentials cache and not be reused.

    .PARAMETER Namespace
        The namespace of the class to use.

    .PARAMETER DoNotUse
        Connection Protocols that should not be used.

    .PARAMETER Force
        Overrides some checks that might otherwise halt execution as a precaution
        - Ignores timeout on bad connections

    .PARAMETER SilentlyContinue
        Use in conjunction with the -EnableException switch.
        By default, Get-DbaCmObject will throw a terminating exception when connecting to a target is impossible in exception enabled mode.
        Setting this switch will cause it write a non-terminating exception and continue with the next computer.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: ComputerManagement, CIM
        Author: Friedrich Weinmann (@FredWeinmann)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaCmObject

    .EXAMPLE
        PS C:\> Get-DbaCmObject win32_OperatingSystem

        Retrieves the common operating system information from the local computer.

    .EXAMPLE
        PS C:\> Get-DbaCmObject -Computername "sql2014" -ClassName Win32_OperatingSystem -Credential $cred -DoNotUse CimRM

        Retrieves the common operating system information from the server sql2014.
        It will use the Credentials stored in $cred to connect, unless they are known to not work, in which case they will default to windows credentials (unless another default has been set).

    #>
    [CmdletBinding(DefaultParameterSetName = "Class")]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSAvoidUsingWMICmdlet", "", Justification = "Using Get-WmiObject is used as a fallback for gathering information")]
    param (
        [Parameter(Mandatory, Position = 0, ParameterSetName = "Class")]
        [Alias('Class')]
        [string]
        $ClassName,

        [Parameter(Mandatory, Position = 0, ParameterSetName = "Query")]
        [string]
        $Query,

        [Parameter(ValueFromPipeline)]
        [Sqlcollaborative.Dbatools.Parameter.DbaCmConnectionParameter[]]
        $ComputerName = $env:COMPUTERNAME,

        [System.Management.Automation.PSCredential]
        $Credential,

        [string]
        $Namespace = "root\cimv2",

        [Sqlcollaborative.Dbatools.Connection.ManagementConnectionType[]]
        $DoNotUse = "None",

        [switch]
        $Force,

        [switch]
        $SilentlyContinue,

        [switch]
        [Alias('Silent')]$EnableException
    )

    begin {
        #region Configuration Values
        $disable_cache = [Sqlcollaborative.Dbatools.Connection.ConnectionHost]::DisableCache

        Write-Message -Level Verbose -Message "Configuration loaded | Cache disabled: $disable_cache"
        #endregion Configuration Values

        $ParSet = $PSCmdlet.ParameterSetName
    }
    process {
        # uses cim commands
        :main foreach ($connectionObject in $ComputerName) {
            if (-not $connectionObject.Success) { Stop-Function -Message "Failed to interpret input: $($connectionObject.Input)" -Category InvalidArgument -Target $connectionObject.Input -Continue -SilentlyContinue:$SilentlyContinue }

            # Since all connection caching runs using lower-case strings, making it lowercase here simplifies things.
            $computer = $connectionObject.Connection.ComputerName.ToLower()

            Write-Message -Message "[$computer] Retrieving Management Information" -Level VeryVerbose -Target $computer

            $connection = $connectionObject.Connection

            # Ensure using the right credentials
            try { $cred = $connection.GetCredential($Credential) }
            catch {
                $message = "Bad credentials! "
                if ($Credential) { $message += "The credentials for $($Credential.UserName) are known to not work. " }
                else { $message += "The windows credentials are known to not work. " }
                if ($connection.EnableCredentialFailover -or $connection.OverrideExplicitCredential) { $message += "The connection is configured to use credentials that are known to be good, but none have been registered yet. " }
                elseif ($connection.Credentials) { $message += "Working credentials are known for $($connection.Credentials.UserName), however the connection is not configured to automatically use them. This can be done using 'Set-DbaCmConnection -ComputerName $connection -OverrideExplicitCredential' " }
                elseif ($connection.UseWindowsCredentials) { $message += "The windows credentials are known to work, however the connection is not configured to automatically use them. This can be done using 'Set-DbaCmConnection -ComputerName $connection -OverrideExplicitCredential' " }
                $message += $_.Exception.Message
                Stop-Function -Message $message -ErrorRecord $_ -Target $connection -Continue -OverrideExceptionMessage
            }

            # Flags-Enumerations cannot be added in PowerShell 4 or older.
            # Thus we create a string and convert it afterwards.
            $enabledProtocols = "None"
            if ($connection.CimRM -notlike "Disabled") { $enabledProtocols += ", CimRM" }
            if ($connection.CimDCOM -notlike "Disabled") { $enabledProtocols += ", CimDCOM" }
            if ($connection.Wmi -notlike "Disabled") { $enabledProtocols += ", Wmi" }
            if ($connection.PowerShellRemoting -notlike "Disabled") { $enabledProtocols += ", PowerShellRemoting" }
            [Sqlcollaborative.Dbatools.Connection.ManagementConnectionType]$enabledProtocols = $enabledProtocols

            # Create list of excluded connection types (Duplicates don't matter)
            $excluded = @()
            foreach ($item in $DoNotUse) { $excluded += $item }

            :sub while ($true) {
                try { $conType = $connection.GetConnectionType(($excluded -join ","), $Force) }
                catch {
                    if (-not $disable_cache) { [Sqlcollaborative.Dbatools.Connection.ConnectionHost]::Connections[$computer] = $connection }
                    Stop-Function -Message "[$computer] Unable to find a connection to the target system. Ensure the name is typed correctly, and the server allows any of the following protocols: $enabledProtocols" -Target $computer -Category OpenError -Continue -ContinueLabel "main" -SilentlyContinue:$SilentlyContinue -ErrorRecord $_
                }

                switch ($conType.ToString()) {
                    #region CimRM
                    "CimRM" {
                        Write-Message -Level Verbose -Message "[$computer] Accessing computer using Cim over WinRM"
                        try {
                            if ($ParSet -eq "Class") { $connection.GetCimRMInstance($cred, $ClassName, $Namespace) }
                            else { $connection.QueryCimRMInstance($cred, $Query, "WQL", $Namespace) }

                            Write-Message -Level Verbose -Message "[$computer] Accessing computer using Cim over WinRM - Success"
                            $connection.ReportSuccess('CimRM')
                            $connection.AddGoodCredential($cred)
                            if (-not $disable_cache) { [Sqlcollaborative.Dbatools.Connection.ConnectionHost]::Connections[$computer] = $connection }
                            continue main
                        } catch {
                            Write-Message -Level Verbose -Message "[$computer] Accessing computer using Cim over WinRM - Failed"

                            # 1 = Generic runtime error
                            if ($_.Exception.InnerException.StatusCode -eq 1) {
                                # 0x8007052e, 0x80070005 : Authentication error, bad credential
                                if (($_.Exception.InnerException -eq 0x8007052e) -or ($_.Exception.InnerException -eq 0x80070005)) {
                                    # Ignore the global setting for bad credential cache disabling, since the connection object is aware of that state and will ignore input if it should.
                                    # This is due to the ability to locally override the global setting, thus it must be done on the object and can then be done in code
                                    $connection.AddBadCredential($cred)
                                    if (-not $disable_cache) { [Sqlcollaborative.Dbatools.Connection.ConnectionHost]::Connections[$computer] = $connection }
                                    Stop-Function -Message "[$computer] Invalid connection credentials" -Target $computer -Continue -ContinueLabel "main" -ErrorRecord $_ -SilentlyContinue:$SilentlyContinue -OverrideExceptionMessage
                                } elseif ($_.Exception.InnerException.MessageId -eq "HRESULT 0x80041013") {
                                    if ($ParSet -eq "Class") { Stop-Function -Message "[$computer] Failed to access $class in namespace $Namespace" -Target $computer -Continue -ContinueLabel "main" -ErrorRecord $_ -SilentlyContinue:$SilentlyContinue -Exception $_.Exception.InnerException }
                                    else { Stop-Function -Message "[$computer] Failed to execute $query in namespace $Namespace" -Target $computer -Continue -ContinueLabel "main" -ErrorRecord $_ -SilentlyContinue:$SilentlyContinue -Exception $_.Exception.InnerException }
                                } else {
                                    $connection.ReportFailure('CimRM')
                                    $excluded += "CimRM"
                                    continue sub
                                }
                            }

                            # 2 = Access to specific resource denied
                            elseif ($_.Exception.InnerException.StatusCode -eq 2) {
                                Stop-Function -Message "[$computer] Access to computer granted, but access to $Namespace\$ClassName denied" -Target $computer -Continue -ContinueLabel "main" -ErrorRecord $_ -SilentlyContinue:$SilentlyContinue -OverrideExceptionMessage
                            }

                            # 3 = Invalid Namespace
                            elseif ($_.Exception.InnerException.StatusCode -eq 3) {
                                Stop-Function -Message "[$computer] Invalid namespace: $Namespace" -Target $computer -Continue -ContinueLabel "main" -ErrorRecord $_ -SilentlyContinue:$SilentlyContinue -OverrideExceptionMessage
                            }
                            # 5 = Invalid Class
                            # See here for code reference: https://msdn.microsoft.com/en-us/library/cc150671(v=vs.85).aspx
                            elseif ($_.Exception.InnerException.StatusCode -eq 5) {
                                Stop-Function -Message "[$computer] Invalid class name ($ClassName), not found in current namespace ($Namespace)" -Target $computer -Continue -ContinueLabel "main" -ErrorRecord $_ -SilentlyContinue:$SilentlyContinue -OverrideExceptionMessage
                            }

                            # 0 & ExtendedStatus = Weird issue beyond the scope of the CIM standard. Often a server-side issue
                            elseif (($_.Exception.InnerException.StatusCode -eq 0) -and ($_.Exception.InnerException.ErrorData.original_error -like "__ExtendedStatus")) {
                                Stop-Function -Message "[$computer] Something went wrong when looking for $ClassName, in $Namespace. This often indicates issues with the target system." -Target $computer -Continue -ContinueLabel "main" -ErrorRecord $_ -SilentlyContinue:$SilentlyContinue
                            } else {
                                $connection.ReportFailure('CimRM')
                                $excluded += "CimRM"
                                continue sub
                            }
                        }
                    }
                    #endregion CimRM

                    #region CimDCOM
                    "CimDCOM" {
                        Write-Message -Level Verbose -Message "[$computer] Accessing computer using Cim over DCOM"
                        try {
                            if ($ParSet -eq "Class") { $connection.GetCimDCOMInstance($cred, $ClassName, $Namespace) }
                            else { $connection.QueryCimDCOMInstance($cred, $Query, "WQL", $Namespace) }

                            Write-Message -Level Verbose -Message "[$computer] Accessing computer using Cim over DCOM - Success"
                            $connection.ReportSuccess('CimDCOM')
                            $connection.AddGoodCredential($cred)
                            if (-not $disable_cache) { [Sqlcollaborative.Dbatools.Connection.ConnectionHost]::Connections[$computer] = $connection }
                            continue main
                        } catch {
                            Write-Message -Level Verbose -Message "[$computer] Accessing computer using Cim over DCOM - Failed"

                            # 1 = Generic runtime error
                            if ($_.Exception.InnerException.StatusCode -eq 1) {
                                # 0x8007052e, 0x80070005 : Authentication error, bad credential
                                if (($_.Exception.InnerException -eq 0x8007052e) -or ($_.Exception.InnerException -eq 0x80070005)) {
                                    # Ignore the global setting for bad credential cache disabling, since the connection object is aware of that state and will ignore input if it should.
                                    # This is due to the ability to locally override the global setting, thus it must be done on the object and can then be done in code
                                    $connection.AddBadCredential($cred)
                                    if (-not $disable_cache) { [Sqlcollaborative.Dbatools.Connection.ConnectionHost]::Connections[$computer] = $connection }
                                    Stop-Function -Message "[$computer] Invalid connection credentials" -Target $computer -Continue -ContinueLabel "main" -ErrorRecord $_ -SilentlyContinue:$SilentlyContinue -OverrideExceptionMessage
                                } elseif ($_.Exception.InnerException.MessageId -eq "HRESULT 0x80041013") {
                                    if ($ParSet -eq "Class") { Stop-Function -Message "[$computer] Failed to access $class in namespace $Namespace" -Target $computer -Continue -ContinueLabel "main" -ErrorRecord $_ -SilentlyContinue:$SilentlyContinue -Exception $_.Exception.InnerException }
                                    else { Stop-Function -Message "[$computer] Failed to execute $query in namespace $Namespace" -Target $computer -Continue -ContinueLabel "main" -ErrorRecord $_ -SilentlyContinue:$SilentlyContinue -Exception $_.Exception.InnerException }
                                } else {
                                    $connection.ReportFailure('CimDCOM')
                                    $excluded += "CimDCOM"
                                    continue sub
                                }
                            }

                            # 2 = Access to specific resource denied
                            elseif ($_.Exception.InnerException.StatusCode -eq 2) {
                                Stop-Function -Message "[$computer] Access to computer granted, but access to $Namespace\$ClassName denied" -Target $computer -Continue -ContinueLabel "main" -ErrorRecord $_ -SilentlyContinue:$SilentlyContinue -OverrideExceptionMessage
                            }

                            # 3 = Invalid Namespace
                            elseif ($_.Exception.InnerException.StatusCode -eq 3) {
                                Stop-Function -Message "[$computer] Invalid namespace: $Namespace" -Target $computer -Continue -ContinueLabel "main" -ErrorRecord $_ -SilentlyContinue:$SilentlyContinue -OverrideExceptionMessage
                            }

                            # 5 = Invalid Class
                            # See here for code reference: https://msdn.microsoft.com/en-us/library/cc150671(v=vs.85).aspx
                            elseif ($_.Exception.InnerException.StatusCode -eq 5) {
                                Stop-Function -Message "[$computer] Invalid class name ($ClassName), not found in current namespace ($Namespace)" -Target $computer -Continue -ContinueLabel "main" -ErrorRecord $_ -SilentlyContinue:$SilentlyContinue -OverrideExceptionMessage
                            }

                            # 0 & ExtendedStatus = Weird issue beyond the scope of the CIM standard. Often a server-side issue
                            elseif (($_.Exception.InnerException.StatusCode -eq 0) -and ($_.Exception.InnerException.ErrorData.original_error -like "__ExtendedStatus")) {
                                Stop-Function -Message "[$computer] Something went wrong when looking for $ClassName, in $Namespace. This often indicates issues with the target system." -Target $computer -Continue -ContinueLabel "main" -ErrorRecord $_ -SilentlyContinue:$SilentlyContinue
                            }

                            else {
                                $connection.ReportFailure('CimDCOM')
                                $excluded += "CimDCOM"
                                continue sub
                            }
                        }
                    }
                    #endregion CimDCOM

                    #region Wmi
                    "Wmi" {
                        Write-Message -Level Verbose -Message "[$computer] Accessing computer using WMI"
                        try {
                            switch ($ParSet) {
                                "Class" {
                                    $parameters = @{
                                        ComputerName = $computer
                                        ClassName    = $ClassName
                                        ErrorAction  = 'Stop'
                                    }
                                    if ($cred) { $parameters["Credential"] = $cred }
                                    if (Test-Bound "Namespace") { $parameters["Namespace"] = $Namespace }

                                }
                                "Query" {
                                    $parameters = @{
                                        ComputerName = $computer
                                        Query        = $Query
                                        ErrorAction  = 'Stop'
                                    }
                                    if ($cred) { $parameters["Credential"] = $cred }
                                    if (Test-Bound "Namespace") { $parameters["Namespace"] = $Namespace }
                                }
                            }

                            Get-WmiObject @parameters

                            Write-Message -Level Verbose -Message "[$computer] Accessing computer using WMI - Success"
                            $connection.ReportSuccess('Wmi')
                            $connection.AddGoodCredential($cred)
                            if (-not $disable_cache) { [Sqlcollaborative.Dbatools.Connection.ConnectionHost]::Connections[$computer] = $connection }
                            continue main
                        } catch {
                            Write-Message -Level Verbose -Message "[$computer] Accessing computer using WMI - Failed" -ErrorRecord $_

                            if ($_.CategoryInfo.Reason -eq "UnauthorizedAccessException") {
                                # Ignore the global setting for bad credential cache disabling, since the connection object is aware of that state and will ignore input if it should.
                                # This is due to the ability to locally override the global setting, thus it must be done on the object and can then be done in code
                                $connection.AddBadCredential($cred)
                                if (-not $disable_cache) { [Sqlcollaborative.Dbatools.Connection.ConnectionHost]::Connections[$computer] = $connection }
                                Stop-Function -Message "[$computer] Invalid connection credentials" -Target $computer -Continue -ContinueLabel "main" -ErrorRecord $_ -SilentlyContinue:$SilentlyContinue
                            } elseif ($_.CategoryInfo.Category -eq "InvalidType") {
                                Stop-Function -Message "[$computer] Invalid class name ($ClassName), not found in current namespace ($Namespace)" -Target $computer -Continue -ContinueLabel "main" -ErrorRecord $_ -SilentlyContinue:$SilentlyContinue
                            } elseif ($_.Exception.ErrorCode -eq "ProviderLoadFailure") {
                                Stop-Function -Message "[$computer] Failed to access: $ClassName, in namespace: $Namespace - There was a provider error. This indicates a potential issue with WMI on the server side." -Target $computer -Continue -ContinueLabel "main" -ErrorRecord $_ -SilentlyContinue:$SilentlyContinue
                            } else {
                                $connection.ReportFailure('Wmi')
                                $excluded += "Wmi"
                                continue sub
                            }
                        }
                    }
                    #endregion Wmi

                    #region PowerShell Remoting
                    "PowerShellRemoting" {
                        try {
                            Write-Message -Level Verbose -Message "[$computer] Accessing computer using PowerShell Remoting"
                            $scp_string = "Get-WmiObject -Class $ClassName -ErrorAction Stop"
                            if ($PSBoundParameters.ContainsKey("Namespace")) { $scp_string += " -Namespace $Namespace" }

                            $parameters = @{
                                ScriptBlock  = ([System.Management.Automation.ScriptBlock]::Create($scp_string))
                                ComputerName = $ComputerName
                                ErrorAction  = 'Stop'
                            }
                            if ($Credential) { $parameters["Credential"] = $Credential }
                            Invoke-Command @parameters

                            Write-Message -Level Verbose -Message "[$computer] Accessing computer using PowerShell Remoting - Success"
                            $connection.ReportSuccess('PowerShellRemoting')
                            $connection.AddGoodCredential($cred)
                            if (-not $disable_cache) { [Sqlcollaborative.Dbatools.Connection.ConnectionHost]::Connections[$computer] = $connection }
                            continue main
                        } catch {
                            # Will always consider authenticated, since any call with credentials to a server that doesn't exist will also carry invalid credentials error.
                            # There simply is no way to differentiate between actual authentication errors and server not reached
                            $connection.ReportFailure('PowerShellRemoting')
                            $excluded += "PowerShellRemoting"
                            continue sub
                        }
                    }
                    #endregion PowerShell Remoting
                }
            }
        }
    }
}

tools\dbatools\functions\Get-DbaCmsRegServer.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaCmsRegServer {
    <#
    .SYNOPSIS
        Gets list of SQL Server objects stored in SQL Server Central Management Server (CMS).

    .DESCRIPTION
        Returns an array of servers found in the CMS.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Name
        Specifies one or more names to include. Name is the visible name in SSMS CMS interface (labeled Registered Server Name)

    .PARAMETER ServerName
        Specifies one or more server names to include. Server Name is the actual instance name (labeled Server Name)

    .PARAMETER Group
        Specifies one or more groups to include from SQL Server Central Management Server.

    .PARAMETER ExcludeGroup
        Specifies one or more Central Management Server groups to exclude.

    .PARAMETER ExcludeCmsServer
        Deprecated, now follows the Microsoft convention of not including it by default. If you'd like to include the CMS Server, use -IncludeSelf

    .PARAMETER Id
        Get server by Id(s)

    .PARAMETER IncludeSelf
        If this switch is enabled, the CMS server itself will be included in the results, along with all other Registered Servers.

    .PARAMETER ResolveNetworkName
        If this switch is enabled, the NetBIOS name and IP address(es) of each server will be returned.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.

        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.

        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: RegisteredServer, CMS
        Author: Bryan Hamby (@galador)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaCmsRegServer

    .EXAMPLE
        PS C:\> Get-DbaCmsRegServer -SqlInstance sqlserver2014a

        Gets a list of servers from the CMS on sqlserver2014a, using Windows Credentials.

    .EXAMPLE
        PS C:\> Get-DbaCmsRegServer -SqlInstance sqlserver2014a -IncludeSelf

        Gets a list of servers from the CMS on sqlserver2014a and includes sqlserver2014a in the output results.

    .EXAMPLE
        PS C:\> Get-DbaCmsRegServer -SqlInstance sqlserver2014a -SqlCredential $credential | Select-Object -Unique -ExpandProperty ServerName

        Returns only the server names from the CMS on sqlserver2014a, using SQL Authentication to authenticate to the server.

    .EXAMPLE
        PS C:\> Get-DbaCmsRegServer -SqlInstance sqlserver2014a -Group HR, Accounting

        Gets a list of servers in the HR and Accounting groups from the CMS on sqlserver2014a.

    .EXAMPLE
        PS C:\> Get-DbaCmsRegServer -SqlInstance sqlserver2014a -Group HR\Development

        Returns a list of servers in the HR and sub-group Development from the CMS on sqlserver2014a.

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$Name,
        [string[]]$ServerName,
        [Alias("Groups")]
        [object[]]$Group,
        [object[]]$ExcludeGroup,
        [int[]]$Id,
        [switch]$IncludeSelf,
        [switch]$ExcludeCmsServer,
        [switch]$ResolveNetworkName,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {
        if ($ResolveNetworkName) {
            $defaults = 'ComputerName', 'FQDN', 'IPAddress', 'Name', 'ServerName', 'Group', 'Description'
        }
        $defaults = 'Name', 'ServerName', 'Group', 'Description'
    }
    process {
        $servers = @()
        foreach ($instance in $SqlInstance) {
            if ($Group) {
                $groupservers = Get-DbaCmsRegServerGroup -SqlInstance $instance -SqlCredential $SqlCredential -Group $Group -ExcludeGroup $ExcludeGroup
                if ($groupservers) {
                    $servers += $groupservers.GetDescendantRegisteredServers()
                }
            } else {
                try {
                    $serverstore = Get-DbaCmsRegServerStore -SqlInstance $instance -SqlCredential $SqlCredential -EnableException
                } catch {
                    Stop-Function -Message "Cannot access Central Management Server '$instance'." -ErrorRecord $_ -Continue
                }
                $servers += ($serverstore.DatabaseEngineServerGroup.GetDescendantRegisteredServers())
                $serverstore.ServerConnection.Disconnect()
            }
        }

        if ($Name) {
            Write-Message -Level Verbose -Message "Filtering by name for $name"
            $servers = $servers | Where-Object Name -in $Name
        }

        if ($ServerName) {
            Write-Message -Level Verbose -Message "Filtering by servername for $servername"
            $servers = $servers | Where-Object ServerName -in $ServerName
        }

        if ($Id) {
            Write-Message -Level Verbose -Message "Filtering by id for $Id (1 = default/root)"
            $servers = $servers | Where-Object Id -in $Id
        }

        if ($ExcludeGroup) {
            $excluded = Get-DbaCmsRegServer $serverstore.ServerConnection.SqlConnectionObject -Group $ExcludeGroup
            Write-Message -Level Verbose -Message "Excluding $ExcludeGroup"
            $servers = $servers | Where-Object { $_.Urn.Value -notin $excluded.Urn.Value }
        }

        foreach ($server in $servers) {
            $groupname = Get-RegServerGroupReverseParse $server
            if ($groupname -eq $server.Name) {
                $groupname = $null
            } else {
                $groupname = ($groupname).Split("\")
                $groupname = $groupname[0 .. ($groupname.Count - 2)]
                $groupname = ($groupname -join "\")
            }


            Add-Member -Force -InputObject $server -MemberType NoteProperty -Name ComputerName -value $serverstore.ComputerName
            Add-Member -Force -InputObject $server -MemberType NoteProperty -Name InstanceName -value $serverstore.InstanceName
            Add-Member -Force -InputObject $server -MemberType NoteProperty -Name SqlInstance -value $serverstore.SqlInstance
            Add-Member -Force -InputObject $server -MemberType NoteProperty -Name Group -value $groupname
            Add-Member -Force -InputObject $server -MemberType NoteProperty -Name FQDN -Value $null
            Add-Member -Force -InputObject $server -MemberType NoteProperty -Name IPAddress -Value $null

            if ($ResolveNetworkName) {
                try {
                    $lookup = Resolve-DbaNetworkName $server.ServerName -Turbo
                    $server.ComputerName = $lookup.ComputerName
                    $server.FQDN = $lookup.FQDN
                    $server.IPAddress = $lookup.IPAddress
                } catch {
                    try {
                        $lookup = Resolve-DbaNetworkName $server.ServerName
                        $server.ComputerName = $lookup.ComputerName
                        $server.FQDN = $lookup.FQDN
                        $server.IPAddress = $lookup.IPAddress
                    } catch {
                        # here to avoid an empty catch
                        $null = 1
                    }
                }
            }
            Add-Member -Force -InputObject $server -MemberType ScriptMethod -Name ToString -Value { $this.ServerName }
            Select-DefaultView -InputObject $server -Property $defaults
        }

        if ($IncludeSelf -and $servers) {
            Write-Message -Level Verbose -Message "Adding CMS instance"
            $self = $servers[0].PsObject.Copy()
            $self | Add-Member -MemberType NoteProperty -Name Name -Value "CMS Instance" -Force
            $self.ServerName = $instance
            $self.Description = $null
            $self.SecureConnectionString = $null
            Select-DefaultView -InputObject $self -Property $defaults
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Parameter ExcludeCmsServer
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias Get-DbaRegisteredServerName
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias Get-SqlRegisteredServerName
    }
}

tools\dbatools\functions\Get-DbaCmsRegServerGroup.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaCmsRegServerGroup {
    <#
    .SYNOPSIS
        Gets list of Server Groups objects stored in SQL Server Central Management Server (CMS).

    .DESCRIPTION
        Returns an array of Server Groups found in the CMS.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Group
        Specifies one or more groups to include from SQL Server Central Management Server.

    .PARAMETER ExcludeGroup
        Specifies one or more Central Management Server groups to exclude.

    .PARAMETER Id
        Get group by Id(s). This parameter only works if the group has a registered server in it.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.

        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.

        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: RegisteredServer, CMS
        Author: Tony Wilhelm (@tonywsql)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaCmsRegServerGroup

    .EXAMPLE
        PS C:\> Get-DbaCmsRegServerGroup -SqlInstance sqlserver2014a

        Gets the top level groups from the CMS on sqlserver2014a, using Windows Credentials.

    .EXAMPLE
        PS C:\> Get-DbaCmsRegServerGroup -SqlInstance sqlserver2014a -SqlCredential $credential

        Gets the top level groups from the CMS on sqlserver2014a, using alternative credentials to authenticate to the server.

    .EXAMPLE
        PS C:\> Get-DbaCmsRegServerGroup -SqlInstance sqlserver2014a -Group HR, Accounting

        Gets the HR and Accounting groups from the CMS on sqlserver2014a.

    .EXAMPLE
        PS C:\> Get-DbaCmsRegServerGroup -SqlInstance sqlserver2014a -Group HR\Development

        Returns the sub-group Development of the HR group from the CMS on sqlserver2014a.

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [object[]]$Group,
        [object[]]$ExcludeGroup,
        [int[]]$Id,
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Get-DbaCmsRegServerStore -SqlInstance $instance -SqlCredential $SqlCredential -EnableException
            } catch {
                Stop-Function -Message "Cannot access Central Management Server '$instance'" -ErrorRecord $_ -Continue
            }

            $groups = @()

            if ($group) {
                foreach ($currentgroup in $Group) {
                    Write-Message -Level Verbose -Message "Processing $currentgroup"
                    if ($currentgroup -is [Microsoft.SqlServer.Management.RegisteredServers.ServerGroup]) {
                        $currentgroup = Get-RegServerGroupReverseParse -object $currentgroup
                    }

                    if ($currentgroup -match 'DatabaseEngineServerGroup\\') {
                        $currentgroup = $currentgroup.Replace('DatabaseEngineServerGroup\', '')
                    }

                    if ($currentgroup -match '\\') {
                        $split = $currentgroup.Split('\\')
                        $i = 0
                        $groupobject = $server.DatabaseEngineServerGroup
                        do {
                            if ($groupobject) {
                                $groupobject = $groupobject.ServerGroups[$split[$i]]
                                Write-Message -Level Verbose -Message "Parsed $($groupobject.Name)"
                            }
                        }
                        until ($i++ -eq $split.GetUpperBound(0))
                        if ($groupobject) {
                            $groups += $groupobject
                        }
                    } else {
                        try {
                            $thisgroup = $server.DatabaseEngineServerGroup.ServerGroups[$currentgroup]
                            if ($thisgroup) {
                                Write-Message -Level Verbose -Message "Added $($thisgroup.Name)"
                                $groups += $thisgroup
                            }
                        } catch {
                            # here to avoid an empty catch
                            $null = 1
                        }
                    }
                }
            } else {
                Write-Message -Level Verbose -Message "Added all root server groups"
                $groups = $server.DatabaseEngineServerGroup.ServerGroups
            }

            if ($Group -eq 'DatabaseEngineServerGroup') {
                Write-Message -Level Verbose -Message "Added root group"
                $groups = $server.DatabaseEngineServerGroup
            }

            if ($ExcludeGroup) {
                $excluded = Get-DbaCmsRegServer $server -Group $ExcludeGroup
                Write-Message -Level Verbose -Message "Excluding $ExcludeGroup"
                $groups = $groups | Where-Object { $_.Urn.Value -notin $excluded.Urn.Value }
            }

            if ($Id) {
                Write-Message -Level Verbose -Message "Filtering for id $Id. Id 1 = default."
                if ($Id -eq 1) {
                    $groups = $server.DatabaseEngineServerGroup | Where-Object Id -in $Id
                } else {
                    $groups = $server.DatabaseEngineServerGroup.GetDescendantRegisteredServers().Parent | Where-Object Id -in $Id
                }
            }
            $server.ServerConnection.Disconnect()
            foreach ($groupobject in $groups) {
                Add-Member -Force -InputObject $groupobject -MemberType NoteProperty -Name ComputerName -value $server.ComputerName
                Add-Member -Force -InputObject $groupobject -MemberType NoteProperty -Name InstanceName -value $server.InstanceName
                Add-Member -Force -InputObject $groupobject -MemberType NoteProperty -Name SqlInstance -value $server.SqlInstance

                Select-DefaultView -InputObject $groupobject -Property ComputerName, InstanceName, SqlInstance, Name, DisplayName, Description, ServerGroups, RegisteredServers
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias Get-DbaRegisteredServerGroup
    }
}

tools\dbatools\functions\Find-DbaSimilarTable.ps1

function Find-DbaSimilarTable {
    <#
    .SYNOPSIS
        Returns all tables/views that are similar in structure by comparing the column names of matching and matched tables/views

    .DESCRIPTION
        This function can either run against specific databases or all databases searching all/specific tables and views including in system databases.
        Typically one would use this to find for example archive version(s) of a table whose structures are similar.
        This can also be used to find tables/views that are very similar to a given table/view structure to see where a table/view might be used.

        More information can be found here: https://sqljana.wordpress.com/2017/03/31/sql-server-find-tables-with-similar-table-structure/

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto-populated from the server

    .PARAMETER SchemaName
        If you are looking in a specific schema whose table structures is to be used as reference structure, provide the name of the schema.
        If no schema is provided, looks at all schemas

    .PARAMETER TableName
        If you are looking in a specific table whose structure is to be used as reference structure, provide the name of the table.
        If no table is provided, looks at all tables
        If the table name exists in multiple schemas, all of them would qualify

    .PARAMETER ExcludeViews
        By default, views are included. You can exclude them by setting this switch to $false
        This excludes views in both matching and matched list

    .PARAMETER IncludeSystemDatabases
        By default system databases are ignored but you can include them within the search using this parameter

    .PARAMETER MatchPercentThreshold
        The minimum percentage of column names that should match between the matching and matched objects.
        Entries with no matches are eliminated

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Table
        Author: Jana Sattainathan (@SQLJana), http://sqljana.wordpress.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Find-DbaSimilarTable

    .EXAMPLE
        PS C:\> Find-DbaSimilarTable -SqlInstance DEV01

        Searches all user database tables and views for each, returns all tables or views with their matching tables/views and match percent

    .EXAMPLE
        PS C:\> Find-DbaSimilarTable -SqlInstance DEV01 -Database AdventureWorks

        Searches AdventureWorks database and lists tables/views and their corresponding matching tables/views with match percent

    .EXAMPLE
        PS C:\> Find-DbaSimilarTable -SqlInstance DEV01 -Database AdventureWorks -SchemaName HumanResource

        Searches AdventureWorks database and lists tables/views in the HumanResource schema with their corresponding matching tables/views with match percent

    .EXAMPLE
        PS C:\> Find-DbaSimilarTable -SqlInstance DEV01 -Database AdventureWorks -SchemaName HumanResource -Table Employee

        Searches AdventureWorks database and lists tables/views in the HumanResource schema and table Employee with its corresponding matching tables/views with match percent

    .EXAMPLE
        PS C:\> Find-DbaSimilarTable -SqlInstance DEV01 -Database AdventureWorks -MatchPercentThreshold 60

        Searches AdventureWorks database and lists all tables/views with its corresponding matching tables/views with match percent greater than or equal to 60

    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "SqlServers")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [string]$SchemaName,
        [string]$TableName,
        [switch]$ExcludeViews,
        [switch]$IncludeSystemDatabases,
        [int]$MatchPercentThreshold,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        $everyServerVwCount = 0

        $sqlSelect = "WITH ColCountsByTable
                AS
                (
                      SELECT
                            c.TABLE_CATALOG,
                            c.TABLE_SCHEMA,
                            c.TABLE_NAME,
                            COUNT(1) AS Column_Count
                      FROM INFORMATION_SCHEMA.COLUMNS c
                      GROUP BY
                            c.TABLE_CATALOG,
                            c.TABLE_SCHEMA,
                            c.TABLE_NAME
                )
                SELECT
                      100 * COUNT(c2.COLUMN_NAME) /*Matching_Column_Count*/ / MIN(ColCountsByTable.Column_Count) /*Column_Count*/ AS MatchPercent,
                      DENSE_RANK() OVER(ORDER BY c.TABLE_CATALOG, c.TABLE_SCHEMA, c.TABLE_NAME) TableNameRankInDB,
                      c.TABLE_CATALOG AS DatabaseName,
                      c.TABLE_SCHEMA AS SchemaName,
                      c.TABLE_NAME AS TableName,
                      t.TABLE_TYPE AS TableType,
                      MIN(ColCountsByTable.Column_Count) AS ColumnCount,
                      c2.TABLE_CATALOG AS MatchingDatabaseName,
                      c2.TABLE_SCHEMA AS MatchingSchemaName,
                      c2.TABLE_NAME AS MatchingTableName,
                      t2.TABLE_TYPE AS MatchingTableType,
                      COUNT(c2.COLUMN_NAME) AS MatchingColumnCount
                FROM INFORMATION_SCHEMA.TABLES t
                      INNER JOIN INFORMATION_SCHEMA.COLUMNS c
                            ON t.TABLE_CATALOG = c.TABLE_CATALOG
                                  AND t.TABLE_SCHEMA = c.TABLE_SCHEMA
                                  AND t.TABLE_NAME = c.TABLE_NAME
                      INNER JOIN ColCountsByTable
                            ON t.TABLE_CATALOG = ColCountsByTable.TABLE_CATALOG
                                  AND t.TABLE_SCHEMA = ColCountsByTable.TABLE_SCHEMA
                                  AND t.TABLE_NAME = ColCountsByTable.TABLE_NAME
                      LEFT OUTER JOIN INFORMATION_SCHEMA.COLUMNS c2
                            ON t.TABLE_NAME != c2.TABLE_NAME
                                  AND c.COLUMN_NAME = c2.COLUMN_NAME
                      LEFT JOIN INFORMATION_SCHEMA.TABLES t2
                            ON c2.TABLE_NAME = t2.TABLE_NAME"

        $sqlWhere = "
                WHERE "

        $sqlGroupBy = "
                GROUP BY
                      c.TABLE_CATALOG,
                      c.TABLE_SCHEMA,
                      c.TABLE_NAME,
                      t.TABLE_TYPE,
                      c2.TABLE_CATALOG,
                      c2.TABLE_SCHEMA,
                      c2.TABLE_NAME,
                      t2.TABLE_TYPE "

        $sqlHaving = "
                HAVING
                    /*Match_Percent should be greater than 0 at minimum!*/
                    "

        $sqlOrderBy = "
                ORDER BY
                      MatchPercent DESC"


        $sql = ''
        $wherearray = @()

        if ($ExcludeViews) {
            $wherearray += " (t.TABLE_TYPE <> 'VIEW' AND t2.TABLE_TYPE <> 'VIEW') "
        }

        if ($SchemaName) {
            $wherearray += (" (c.TABLE_SCHEMA = '{0}') " -f $SchemaName.Replace("'", "''")) #Replace single quotes with two single quotes!
        }

        if ($TableName) {
            $wherearray += (" (c.TABLE_NAME = '{0}') " -f $TableName.Replace("'", "''")) #Replace single quotes with two single quotes!

        }

        if ($wherearray.length -gt 0) {
            $sqlWhere = "$sqlWhere " + ($wherearray -join " AND ")
        } else {
            $sqlWhere = ""
        }


        $matchThreshold = 0
        if ($MatchPercentThreshold) {
            $matchThreshold = $MatchPercentThreshold
        } else {
            $matchThreshold = 0
        }

        $sqlHaving += (" (100 * COUNT(c2.COLUMN_NAME) / MIN(ColCountsByTable.Column_Count) >= {0}) " -f $matchThreshold)



        $sql = "$sqlSelect $sqlWhere $sqlGroupBy $sqlHaving $sqlOrderBy"

        Write-Message -Level Debug -Message $sql

    }

    process {
        foreach ($Instance in $SqlInstance) {

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }


            #Use IsAccessible instead of Status -eq 'normal' because databases that are on readable secondaries for AG or mirroring replicas will cause errors to be thrown
            if ($IncludeSystemDatabases) {
                $dbs = $server.Databases | Where-Object { $_.IsAccessible -eq $true }
            } else {
                $dbs = $server.Databases | Where-Object { $_.IsAccessible -eq $true -and $_.IsSystemObject -eq $false }
            }

            if ($Database) {
                $dbs = $server.Databases | Where-Object Name -In $Database
            }

            if ($ExcludeDatabase) {
                $dbs = $dbs | Where-Object Name -NotIn $ExcludeDatabase
            }


            $totalCount = 0
            $dbCount = $dbs.count
            foreach ($db in $dbs) {

                Write-Message -Level Verbose -Message "Searching on database $db"
                $rows = $db.Query($sql)

                foreach ($row in $rows) {
                    [PSCustomObject]@{
                        ComputerName              = $server.ComputerName
                        InstanceName              = $server.ServiceName
                        SqlInstance               = $server.DomainInstanceName
                        Table                     = "$($row.DatabaseName).$($row.SchemaName).$($row.TableName)"
                        MatchingTable             = "$($row.MatchingDatabaseName).$($row.MatchingSchemaName).$($row.MatchingTableName)"
                        MatchPercent              = $row.MatchPercent
                        OriginalDatabaseName      = $row.DatabaseName
                        OriginalSchemaName        = $row.SchemaName
                        OriginalTableName         = $row.TableName
                        OriginalTableNameRankInDB = $row.TableNameRankInDB
                        OriginalTableType         = $row.TableType
                        OriginalColumnCount       = $row.ColumnCount
                        MatchingDatabaseName      = $row.MatchingDatabaseName
                        MatchingSchemaName        = $row.MatchingSchemaName
                        MatchingTableName         = $row.MatchingTableName
                        MatchingTableType         = $row.MatchingTableType
                        MatchingColumnCount       = $row.MatchingColumnCount
                    }
                }

                $vwCount = $vwCount + $rows.Count
                $totalCount = $totalCount + $rows.Count
                $everyServerVwCount = $everyServerVwCount + $rows.Count

                Write-Message -Level Verbose -Message "Found $vwCount tables/views in $db"
            }

            Write-Message -Level Verbose -Message "Found $totalCount total tables/views in $dbCount databases"
        }
    }
    end {
        Write-Message -Level Verbose -Message "Found $everyServerVwCount total tables/views"
    }
}

tools\dbatools\functions\Find-DbaOrphanedFile.ps1

#ValidationTags#FlowControl,Pipeline#
function Find-DbaOrphanedFile {
    <#
    .SYNOPSIS
        Find-DbaOrphanedFile finds orphaned database files. Orphaned database files are files not associated with any attached database.

    .DESCRIPTION
        This command searches all directories associated with SQL database files for database files that are not currently in use by the SQL Server instance.

        By default, it looks for orphaned .mdf, .ldf and .ndf files in the root\data directory, the default data path, the default log path, the system paths and any directory in use by any attached directory.

        You can specify additional filetypes using the -FileType parameter, and additional paths to search using the -Path parameter.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2000 or higher.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Path
        Specifies one or more directories to search in addition to the default data and log directories.

    .PARAMETER FileType
        Specifies file extensions other than mdf, ldf and ndf to search for. Do not include the dot (".") when specifying the extension.

    .PARAMETER LocalOnly
        If this switch is enabled, only local filenames will be returned. Using this switch with multiple servers is not recommended since it does not return the associated server name.

    .PARAMETER RemoteOnly
        If this switch is enabled, only remote filenames will be returned.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Orphan, Database, DatabaseFile
        Author: Sander Stad (@sqlstad), sqlstad.nl

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        Requires: sysadmin access on SQL Servers

        Thanks to Paul Randal's notes on FILESTREAM which can be found at http://www.sqlskills.com/blogs/paul/filestream-directory-structure/

    .LINK
        https://dbatools.io/Find-DbaOrphanedFile

    .EXAMPLE
        PS C:\> Find-DbaOrphanedFile -SqlInstance sqlserver2014a

        Connects to sqlserver2014a, authenticating with Windows credentials, and searches for orphaned files. Returns server name, local filename, and unc path to file.

    .EXAMPLE
        PS C:\> Find-DbaOrphanedFile -SqlInstance sqlserver2014a -SqlCredential $cred

        Connects to sqlserver2014a, authenticating with SQL Server authentication, and searches for orphaned files. Returns server name, local filename, and unc path to file.

    .EXAMPLE
        PS C:\> Find-DbaOrphanedFile -SqlInstance sql2014 -Path 'E:\Dir1', 'E:\Dir2'

        Finds the orphaned files in "E:\Dir1" and "E:Dir2" in addition to the default directories.

    .EXAMPLE
        PS C:\> Find-DbaOrphanedFile -SqlInstance sql2014 -LocalOnly

        Returns only the local file paths for orphaned files.

    .EXAMPLE
        PS C:\> Find-DbaOrphanedFile -SqlInstance sql2014 -RemoteOnly

        Returns only the remote file path for orphaned files.

    .EXAMPLE
        PS C:\> Find-DbaOrphanedFile -SqlInstance sql2014, sql2016 -FileType fsf, mld

        Finds the orphaned ending with ".fsf" and ".mld" in addition to the default filetypes ".mdf", ".ldf", ".ndf" for both the servers sql2014 and sql2016.

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [pscredential]$SqlCredential,
        [string[]]$Path,
        [string[]]$FileType,
        [switch]$LocalOnly,
        [switch]$RemoteOnly,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        function Get-SQLDirTreeQuery {
            param($PathList)
            # use sysaltfiles in lower versions

            $q1 = "CREATE TABLE #enum ( id int IDENTITY, fs_filename nvarchar(512), depth int, is_file int, parent nvarchar(512) ); DECLARE @dir nvarchar(512);"
            $q2 = "SET @dir = 'dirname';

                INSERT INTO #enum( fs_filename, depth, is_file )
                EXEC xp_dirtree @dir, 1, 1;

                UPDATE #enum
                SET parent = @dir,
                fs_filename = ltrim(rtrim(fs_filename))
                WHERE parent IS NULL;"

            $query_files_sql = "SELECT e.fs_filename AS filename, e.parent
                    FROM #enum AS e
                    WHERE e.fs_filename NOT IN( 'xtp', '5', '`$FSLOG', '`$HKv2', 'filestream.hdr' )
                    AND is_file = 1;"

            # build the query string based on how many directories they want to enumerate
            $sql = $q1
            $sql += $($PathList | Where-Object { $_ -ne '' } | ForEach-Object { "$([System.Environment]::Newline)$($q2 -Replace 'dirname', $_)" })
            $sql += $query_files_sql
            Write-Message -Level Debug -Message $sql
            return $sql
        }
        function Get-SqlFileStructure {
            param
            (
                [Parameter(Mandatory, Position = 1)]
                [Microsoft.SqlServer.Management.Smo.SqlSmoObject]$smoserver
            )
            if ($smoserver.versionMajor -eq 8) {
                $sql = "select filename from sysaltfiles"
            } else {
                $sql = "select physical_name as filename from sys.master_files"
            }

            $dbfiletable = $smoserver.ConnectionContext.ExecuteWithResults($sql)
            $ftfiletable = $dbfiletable.Tables[0].Clone()
            $dbfiletable.Tables[0].TableName = "data"

            # Add support for Full Text Catalogs in Sql Server 2005 and below
            if ($server.VersionMajor -lt 10) {
                $databaselist = $smoserver.Databases | Select-Object -property  Name, IsFullTextEnabled
                foreach ($db in $databaselist) {
                    if ($db.IsFullTextEnabled -eq $false) {
                        continue
                    }
                    $database = $db.name
                    $fttable = $null = $smoserver.Databases[$database].ExecuteWithResults('sp_help_fulltext_catalogs')
                    foreach ($ftc in $fttable.Tables[0].rows) {
                        $null = $ftfiletable.Rows.add($ftc.Path)
                    }
                }
            }

            $null = $dbfiletable.Tables.Add($ftfiletable)
            return $dbfiletable.Tables.Filename
        }

        function Format-Path {
            param ($path)

            $path = $path.Trim()
            #Thank you windows 2000
            $path = $path -replace '[^A-Za-z0-9 _\.\-\\:]', '__'
            return $path
        }

        $FileType += "mdf", "ldf", "ndf"
        $systemfiles = "distmdl.ldf", "distmdl.mdf", "mssqlsystemresource.ldf", "mssqlsystemresource.mdf"

        $FileTypeComparison = $FileType | ForEach-Object {$_.ToLower()} | Where-Object { $_ } | Sort-Object | Get-Unique
    }

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }
            # Reset all the arrays
            $dirtreefiles = $valid = $paths = $matching = @()

            $filestructure = Get-SqlFileStructure $server

            # Get any paths associated with current data and log files
            foreach ($file in $filestructure) {
                $paths += Split-Path -Path $file -Parent
            }

            # Get the default data and log directories from the instance
            Write-Message -Level Debug -Message "Adding paths"
            $paths += $server.RootDirectory + "\DATA"
            $paths += Get-SqlDefaultPaths $server data
            $paths += Get-SqlDefaultPaths $server log
            $paths += $server.MasterDBPath
            $paths += $server.MasterDBLogPath
            $paths += $Path
            $paths = $paths | ForEach-Object { "$_".TrimEnd("\") } | Sort-Object | Get-Unique
            $sql = Get-SQLDirTreeQuery $paths
            $datatable = $server.Databases['master'].ExecuteWithResults($sql).Tables[0]

            foreach ($row in $datatable) {
                $fullpath = [IO.Path]::combine($row.parent, $row.filename)
                $dirtreefiles += [pscustomobject]@{
                    FullPath   = $fullpath
                    Comparison = [IO.Path]::GetFullPath($(Format-Path $fullpath))
                }
            }
            $dirtreefiles = $dirtreefiles | Where-Object { $_ } | Sort-Object Comparison -Unique

            foreach ($file in $filestructure) {
                $valid += [IO.Path]::GetFullPath($(Format-Path $file))
            }

            $valid = $valid | Sort-Object | Get-Unique

            foreach ($file in $dirtreefiles.Comparison) {
                foreach ($type in $FileTypeComparison) {
                    if ($file.ToLower().EndsWith($type)) {
                        $matching += $file
                        break
                    }
                }
            }

            $dirtreematcher = @{}
            foreach ($el in $dirtreefiles) {
                $dirtreematcher[$el.Comparison] = $el.Fullpath
            }

            foreach ($file in $matching) {
                if ($file -notin $valid) {
                    $fullpath = $dirtreematcher[$file]

                    $filename = Split-Path $fullpath -Leaf

                    if ($filename -in $systemfiles) { continue }

                    $result = [pscustomobject]@{
                        Server         = $server.name
                        ComputerName   = $server.ComputerName
                        InstanceName   = $server.ServiceName
                        SqlInstance    = $server.DomainInstanceName
                        Filename       = $fullpath
                        RemoteFilename = Join-AdminUnc -Servername $server.ComputerName -Filepath $fullpath
                    }

                    if ($LocalOnly -eq $true) {
                        ($result | Select-Object filename).filename
                        continue
                    }

                    if ($RemoteOnly -eq $true) {
                        ($result | Select-Object remotefilename).remotefilename
                        continue
                    }

                    $result | Select-DefaultView -Property ComputerName, InstanceName, SqlInstance, Filename, RemoteFilename

                }
            }

        }
    }
    end {
        if ($result.count -eq 0) {
            Write-Message -Level Verbose -Message "No orphaned files found"
        }
    }
}

tools\dbatools\functions\Find-DbaLoginInGroup.ps1

#ValidationTags#Messaging#
function Find-DbaLoginInGroup {
    <#
    .SYNOPSIS
        Finds Logins in Active Directory groups that have logins on the SQL Instance.

    .DESCRIPTION
        Outputs all the active directory groups members for a server, or limits it to find a specific AD user in the groups

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input.

    .PARAMETER SqlCredential
        PSCredential object to connect under. If not specified, current Windows login will be used.

    .PARAMETER Login
        Find all AD Groups used on the instance that an individual login is a member of.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Login, Group, Security
        Author: Stephen Bennett, https://sqlnotesfromtheunderground.wordpress.com/ | Simone Bizzotto (@niphlod)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Find-DbaLoginInGroup

    .EXAMPLE
        PS C:\> Find-DbaLoginInGroup -SqlInstance DEV01 -Login "MyDomain\Stephen.Bennett"

        Returns all active directory groups with logins on Sql Instance DEV01 that contain the AD user Stephen.Bennett.

    .EXAMPLE
        PS C:\> Find-DbaLoginInGroup -SqlInstance DEV01

        Returns all active directory users within all windows AD groups that have logins on the instance.

    .EXAMPLE
        PS C:\> Find-DbaLoginInGroup -SqlInstance DEV01 | Where-Object Login -like '*stephen*'

        Returns all active directory users within all windows AD groups that have logins on the instance whose login contains "stephen"

    #>
    [CmdletBinding()]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseSingularNouns", "", Justification = "Internal functions are ignored")]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$Login,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {
        try {
            Add-Type -AssemblyName System.DirectoryServices.AccountManagement
        } catch {
            Stop-Function -Message "Failed to load Assembly needed" -ErrorRecord $_
        }

        function Get-AllLogins {
            param
            (
                [string]$ADGroup,
                [string[]]$discard,
                [string]$ParentADGroup
            )
            begin {
                $output = @()
            }
            process {
                try {
                    $domain = $AdGroup.Split("\")[0]
                    $ads = New-Object System.DirectoryServices.AccountManagement.PrincipalContext('Domain', $domain)
                    [string]$groupName = $AdGroup
                    $group = [System.DirectoryServices.AccountManagement.GroupPrincipal]::FindByIdentity($ads, $groupName);
                    $subgroups = @()
                    foreach ($member in $group.Members) {
                        $memberDomain = $member.DistinguishedName -Split "," | Where-Object { $_ -like "DC=*" } | Select-Object -first 1 | ForEach-Object { $_.ToUpper() -replace "DC=", '' }
                        if ($member.StructuralObjectClass -eq "group") {
                            $fullName = $memberDomain + "\" + $member.SamAccountName
                            if ($fullName -in $discard) {
                                Write-Message -Level Verbose -Message "skipping $fullName, already enumerated"
                                continue
                            } else {
                                $subgroups += $fullName
                            }
                        } else {
                            $output += [PSCustomObject]@{
                                SqlInstance        = $server.Name
                                InstanceName       = $server.ServiceName
                                ComputerName       = $server.ComputerName
                                Login              = $memberDomain + "\" + $member.SamAccountName
                                DisplayName        = $member.DisplayName
                                MemberOf           = $AdGroup
                                ParentADGroupLogin = $ParentADGroup
                            }
                        }
                    }
                } catch {
                    Stop-Function -Message "Failed to connect to Group: $member." -Target $member -ErrorRecord $_
                }
                $discard += $ADGroup
                foreach ($gr in $subgroups) {
                    if ($gr -notin $discard) {
                        $discard += $gr
                        Write-Message -Level Verbose -Message "Looking at $gr, recursively."
                        Get-AllLogins -ADGroup $gr -discard $discard -ParentADGroup $ParentADGroup
                    }
                }
            }
            end {
                $output
            }
        }
    }

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $AdGroups = $server.Logins | Where-Object { $_.LoginType -eq "WindowsGroup" -and $_.Name -ne "BUILTIN\Administrators" -and $_.Name -notlike "*NT SERVICE*" }

            foreach ($AdGroup in $AdGroups) {
                Write-Message -Level Verbose -Message "Looking at Group: $AdGroup"
                $ADGroupOut += Get-AllLogins $AdGroup.Name -ParentADGroup $AdGroup.Name
            }

            if (-not $Login) {
                $res = $ADGroupOut
            } else {
                $res = $ADGroupOut | Where-Object { $Login -contains $_.Login }
                if ($res.Length -eq 0) {
                    continue
                }
            }
            Select-DefaultView -InputObject $res -Property SqlInstance, Login, DisplayName, MemberOf, ParentADGroupLogin
        }
    }
}

tools\dbatools\functions\Find-DbaInstance.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Find-DbaInstance {
    <#
    .SYNOPSIS
        Search for SQL Server Instances.

    .DESCRIPTION
        This function searches for SQL Server Instances.

        It supports a variety of scans for this purpose which can be separated in two categories:
        - Discovery
        - Scan

        Discovery:
        This is where it compiles a list of computers / addresses to check.
        It supports several methods of generating such lists (including Active Directory lookup or IP Ranges), but also supports specifying a list of computers to check.
        - For details on discovery, see the documentation on the '-DiscoveryType' parameter
        - For details on explicitly providing a list, see the documentation on the '-ComputerName' parameter

        Scan:
        Once a list of computers has been provided, this command will execute a variety of actions to determine any instances present for each of them.
        This is described in more detail in the documentation on the '-ScanType' parameter.
        Additional parameters allow more granular control over individual scans (e.g. Credentials to use).

        Note on logging and auditing:
        The Discovery phase is un-problematic since it is non-intrusive, however during the scan phase, all targeted computers may be accessed repeatedly.
        This may cause issues with security teams, due to many logon events and possibly failed authentication.
        This action constitutes a network scan, which may be illegal depending on the nation you are in and whether you own the network you scan.
        If you are unsure whether you may use this command in your environment, check the detailed description on the '-ScanType' parameter and contact your IT security team for advice.

    .PARAMETER ComputerName
        The computer to scan. Can be a variety of input types, including text or the output of Get-ADComputer.
        Any extra instance information (such as connection strings or live sql server connections) beyond the computername will be discarded.

    .PARAMETER DiscoveryType
        The mechanisms to be used to discover instances.
        Supports any combination of:
        - Service Principal Name lookup ('Domain'; from Active Directory)
        - SQL Instance Enumeration ('DataSourceEnumeration'; same as SSMS uses)
        - IP Address range ('IPRange'; all IP Addresses will be scanned)

        SPN Lookup:
        The function tries to connect active directory to look up all computers with registered SQL Instances.
        Not all instances need to be registered properly, making this not 100% reliable.
        By default, your nearest Domain Controller is contacted for this scan.
        However it is possible to explicitly state the DC to contact using its DistinguishedName and the '-DomainController' parameter.
        If credentials were specified using the '-Credential' parameter, those same credentials are used to perform this lookup, allowing the scan of other domains.

        SQL Instance Enumeration:
        This uses the default UDP Broadcast based instance enumeration used by SSMS to detect instances.
        Note that the result from this is not used in the actual scan, but only to compile a list of computers to scan.
        To enable the same results for the scan, ensure that the 'Browser' scan is enabled.

        IP Address range:
        This 'Discovery' uses a range of IPAddresses and simply passes them on to be tested.
        See the 'Description' part of help on security issues of network scanning.
        By default, it will enumerate all ethernet network adapters on the local computer and scan the entire subnet they are on.
        By using the '-IpAddress' parameter, custom network ranges can be specified.

    .PARAMETER Credential
        The credentials to use on windows network connection.
        These credentials are used for:
        - Contact to domain controllers for SPN lookups (only if explicit Domain Controller is specified)
        - CIM/WMI contact to the scanned computers during the scan phase (see the '-ScanType' parameter documentation on affected scans).

    .PARAMETER SqlCredential
        The credentials used to connect to SqlInstances to during the scan phase.
        See the '-ScanType' parameter documentation on affected scans.

    .PARAMETER ScanType
    
        The scans are the individual methods used to retrieve information about the scanned computer and any potentially installed instances.
        This parameter is optional, by default all scans except for establishing an actual SQL connection are performed.
        Scans can be specified in any arbitrary combination, however at least one instance detecting scan needs to be specified in order for data to be returned.

        Scans:
         Browser
        - Tries discovering all instances via the browser service
        - This scan detects instances.
    
        SQLService
        - Tries listing all SQL Services using CIM/WMI
        - This scan uses credentials specified in the '-Credential' parameter if any.
        - This scan detects instances.
        - Success in this scan guarantees high confidence (See parameter '-MinimumConfidence' for details).
    
        SPN
        - Tries looking up the Service Principal Names for each instance
        - Will use the nearest Domain Controller by default
        - Target a specific domain controller using the '-DomainController' parameter
        - If using the '-DomainController' parameter, use the '-Credential' parameter to specify the credentials used to connect
    
        TCPPort
        - Tries connecting to the TCP Ports.
        - By default, port 1433 is connected to.
        - The parameter '-TCPPort' can be used to provide a list of port numbers to scan.
        - This scan detects possible instances. Since other services might bind to a given port, this is not the most reliable test.
        - This scan is also used to validate found SPNs if both scans are used in combination
   
        DNSResolve
        - Tries resolving the computername in DNS
    
        Ping
        - Tries pinging the computer. Failure will NOT terminate scans.
    
        SqlConnect
        - Tries to establish a SQL connection to the server
        - Uses windows credentials by default
        - Specify custom credentials using the '-SqlCredential' parameter
        - This scan is not used by default
        - Success in this scan guarantees high confidence (See parameter '-MinimumConfidence' for details).
    
        All
        - All of the above
    
    .PARAMETER IpAddress
        This parameter can be used to override the defaults for the IPRange discovery.
        This parameter accepts a list of strings supporting any combination of:
        - Plain IP Addresses (e.g.: "10.1.1.1")
        - IP Address Ranges (e.g.: "10.1.1.1-10.1.1.5")
        - IP Address & Subnet Mask (e.g.: "10.1.1.1/255.255.255.0")
        - IP Address & Subnet Length: (e.g.: "10.1.1.1/24)
        Overlapping addresses will not result in duplicate scans.

    .PARAMETER DomainController
        The domain controller to contact for SPN lookups / searches.
        Uses the credentials from the '-Credential' parameter if specified.

    .PARAMETER TCPPort
        The ports to scan in the TCP Port Scan method.
        Defaults to 1433.

    .PARAMETER MinimumConfidence
        This command tries to discover instances, which isn't always a sure thing.
        Depending on the number and type of scans completed, we have different levels of confidence in our results.
        By default, we will return anything that we have at least a low confidence of being an instance.
        These are the confidence levels we support and how they are determined:
        - High: Established SQL Connection (including rejection for bad credentials) or service scan.
        - Medium: Browser reply or a combination of TCPConnect _and_ SPN test.
        - Low: Either TCPConnect _or_ SPN
        - None: Computer existence could be verified, but no sign of an SQL Instance

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Instance, Connect, SqlServer
        Author: Scott Sutherland, 2018 NetSPI | Friedrich Weinmann (@FredWeinmann)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        Outside resources used and modified:
        https://gallery.technet.microsoft.com/scriptcenter/List-the-IP-addresses-in-a-60c5bb6b

    .LINK
        https://dbatools.io/Find-DbaInstance

    .EXAMPLE
        PS C:\> Find-DbaInstance -DiscoveryType Domain, DataSourceEnumeration

        Performs a network search for SQL Instances by:
        - Looking up the Service Principal Names of computers in active directory
        - Using the UDP broadcast based auto-discovery of SSMS
        After that it will extensively scan all hosts thus discovered for instances.

    .EXAMPLE
        PS C:\> Find-DbaInstance -DiscoveryType All

        Performs a network search for SQL Instances, using all discovery protocols:
        - Active directory search for Service Principal Names
        - SQL Instance Enumeration (same as SSMS does)
        - All IPAddresses in the current computer's subnets of all connected network interfaces
        Note: This scan will take a long time, due to including the IP Scan

    .EXAMPLE
        PS C:\> Get-ADComputer -Filter "*" | Find-DbaInstance

        Scans all computers in the domain for SQL Instances, using a deep probe:
        - Tries resolving the name in DNS
        - Tries pinging the computer
        - Tries listing all SQL Services using CIM/WMI
        - Tries discovering all instances via the browser service
        - Tries connecting to the default TCP Port (1433)
        - Tries connecting to the TCP port of each discovered instance
        - Tries to establish a SQL connection to the server using default windows credentials
        - Tries looking up the Service Principal Names for each instance

    .EXAMPLE
        PS C:\> Get-Content .\servers.txt | Find-DbaInstance -SqlCredential $cred -ScanType Browser, SqlConnect

        Reads all servers from the servers.txt file (one server per line),
        then scans each of them for instances using the browser service
        and finally attempts to connect to each instance found using the specified credentials.
        then scans each of them for instances using the browser service and SqlService

    .EXAMPLE
        PS C:\> Find-DbaInstance -ComputerName localhost | Get-DbaDatabase | Format-Table -Wrap

        Scans localhost for instances using the browser service, traverses all instances for all databases and displays all information in a formatted table.

    .EXAMPLE
        PS C:\> Find-DbaInstance -ComputerName localhost | Get-DbaDatabase | Select-Object SqlInstance, Name, Status, RecoveryModel, SizeMB, Compatibility, Owner, LastFullBackup, LastDiffBackup, LastLogBackup | Format-Table -Wrap

        Scans localhost for instances using the browser service, traverses all instances for all databases and displays a subset of the important information in a formatted table.

        Using this method reguarly is not recommended. Use Get-DbaService or Get-DbaCmsRegServer instead.
    #>
    [CmdletBinding()]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseApprovedVerbs", "", Justification = "Internal functions are ignored")]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseOutputTypeCorrectly", "", Justification = "PSSA Rule Ignored by BOH")]
    param (
        [Parameter(Mandatory, ParameterSetName = 'Computer', ValueFromPipeline)]
        [DbaInstance[]]$ComputerName,
        [Parameter(Mandatory, ParameterSetName = 'Discover')]
        [Sqlcollaborative.Dbatools.Discovery.DbaInstanceDiscoveryType]$DiscoveryType,
        [System.Management.Automation.PSCredential]$Credential,
        [System.Management.Automation.PSCredential]$SqlCredential,
        [ValidateSet('Default', 'SQLService', 'Browser', 'TCPPort', 'All', 'SPN', 'Ping', 'SqlConnect', 'DNSResolve')]
        [Sqlcollaborative.Dbatools.Discovery.DbaInstanceScanType[]]$ScanType = "Default",
        [Parameter(ParameterSetName = 'Discover')]
        [string[]]$IpAddress,
        [string]$DomainController,
        [int[]]$TCPPort = 1433,
        [Sqlcollaborative.Dbatools.Discovery.DbaInstanceConfidenceLevel]$MinimumConfidence = 'Low',
        [switch]$EnableException
    )

    begin {

        #region Utility Functions
        function Test-SqlInstance {
            <#
            .SYNOPSIS
                Performs the actual scanning logic

            .DESCRIPTION
                Performs the actual scanning logic
                Each potential target is accessed using the specified scan routines.

            .PARAMETER Target
                The target to scan.

            .EXAMPLE
                PS C:\> Test-SqlInstance
        #>
            [CmdletBinding()]
            param (
                [Parameter(ValueFromPipeline)][DbaInstance[]]$Target,
                [PSCredential]$Credential,
                [PSCredential]$SqlCredential,
                [Sqlcollaborative.Dbatools.Discovery.DbaInstanceScanType]$ScanType,
                [string]$DomainController,
                [int[]]$TCPPort = 1433,
                [Sqlcollaborative.Dbatools.Discovery.DbaInstanceConfidenceLevel]$MinimumConfidence,
                [switch]$EnableException
            )

            begin {
                [System.Collections.ArrayList]$computersScanned = @()
            }

            process {
                foreach ($computer in $Target) {
                    if ($computersScanned.Contains($computer.ComputerName)) {
                        continue
                    } else {
                        $null = $computersScanned.Add($computer.ComputerName)
                    }
                    Write-Message -Level Verbose -Message "Processing: $($computer)" -Target $computer -FunctionName Find-DbaInstance

                    #region Null variables to prevent scope lookup on conditional existence
                    $resolution = $null
                    $pingReply = $null
                    $sPNs = @()
                    $ports = @()
                    $browseResult = $null
                    $services = @()
                    #Variable marked as unused by PSScriptAnalyzer
                    #$serverObject = $null
                    #$browseFailed = $false
                    #endregion Null variables to prevent scope lookup on conditional existence

                    #region Gather data
                    if ($ScanType -band [Sqlcollaborative.Dbatools.Discovery.DbaInstanceScanType]::DNSResolve) {
                        try { $resolution = [System.Net.Dns]::GetHostEntry($computer.ComputerName) }
                        catch {
                            # here to avoid an empty catch
                            $null = 1
                        }
                    }

                    if ($ScanType -band [Sqlcollaborative.Dbatools.Discovery.DbaInstanceScanType]::Ping) {
                        $ping = New-Object System.Net.NetworkInformation.Ping
                        try { $pingReply = $ping.Send($computer.ComputerName) }
                        catch {
                            # here to avoid an empty catch
                            $null = 1
                        }
                    }

                    if ($ScanType -band [Sqlcollaborative.Dbatools.Discovery.DbaInstanceScanType]::SPN) {
                        $computerByName = $computer.ComputerName
                        if ($resolution.HostName) { $computerByName = $resolution.HostName }
                        if ($computerByName -notmatch "$([dbargx]::IPv4)|$([dbargx]::IPv6)") {
                            try { $sPNs = Get-DomainSPN -DomainController $DomainController -Credential $Credential -ComputerName $computerByName -GetSPN }
                            catch {
                                # here to avoid an empty catch
                                $null = 1
                            }
                        }
                    }

                    # $ports required for all scans
                    $ports = $TCPPort | Test-TcpPort -ComputerName $computer
                    
                    if ($ScanType -band [Sqlcollaborative.Dbatools.Discovery.DbaInstanceScanType]::Browser) {
                        try {
                            $browseResult = Get-SQLInstanceBrowserUDP -ComputerName $computer -EnableException
                        } catch {
                            # here to avoid an empty catch
                            $null = 1
                        }
                    }

                    if ($ScanType -band [Sqlcollaborative.Dbatools.Discovery.DbaInstanceScanType]::SqlService) {
                        if ($Credential) { $services = Get-DbaService -ComputerName $computer -Credential $Credential -EnableException -ErrorAction Ignore -WarningAction SilentlyCOntinue }
                        else { $services = Get-DbaService -ComputerName $computer -ErrorAction Ignore -WarningAction SilentlyContinue }
                    }
                    #endregion Gather data

                    #region Gather list of found instance indicators
                    $instanceNames = @()
                    if ($Services) {
                        $Services | Select-Object -ExpandProperty InstanceName -Unique | Where-Object { $_ -and ($instanceNames -notcontains $_) } | ForEach-Object {
                            $instanceNames += $_
                        }
                    }
                    if ($browseResult) {
                        $browseResult | Select-Object -ExpandProperty InstanceName -Unique | Where-Object { $_ -and ($instanceNames -notcontains $_) } | ForEach-Object {
                            $instanceNames += $_
                        }
                    }

                    $portsDetected = @()
                    foreach ($portResult in $ports) {
                        if ($portResult.IsOpen) { $portsDetected += $portResult.Port }
                    }
                    foreach ($sPN in $sPNs) {
                        try { $inst = $sPN.Split(':')[1] }
                        catch { continue }

                        try {
                            [int]$portNumber = $inst
                            if ($portNumber -and ($portsDetected -notcontains $portNumber)) {
                                $portsDetected += $portNumber
                            }
                        } catch {
                            if ($inst -and ($instanceNames -notcontains $inst)) {
                                $instanceNames += $inst
                            }
                        }
                    }
                    #endregion Gather list of found instance indicators

                    #region Case: Nothing found
                    if ((-not $instanceNames) -and (-not $portsDetected)) {
                        if ($resolution -or ($pingReply.Status -like "Success")) {
                            if ($MinimumConfidence -eq [Sqlcollaborative.Dbatools.Discovery.DbaInstanceConfidenceLevel]::None) {
                                New-Object Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport -Property @{
                                    MachineName  = $computer.ComputerName
                                    ComputerName = $computer.ComputerName
                                    Ping         = $pingReply.Status -like 'Success'
                                }
                            } else {
                                Write-Message -Level Verbose -Message "Computer $computer could be contacted, but no trace of an SQL Instance was found. Skipping..." -Target $computer -FunctionName Find-DbaInstance
                            }
                        } else {
                            Write-Message -Level Verbose -Message "Computer $computer could not be contacted, skipping." -Target $computer -FunctionName Find-DbaInstance
                        }

                        continue
                    }
                    #endregion Case: Nothing found

                    [System.Collections.ArrayList]$masterList = @()

                    #region Case: Named instance found
                    foreach ($instance in $instanceNames) {
                        $object = New-Object Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport
                        $object.MachineName = $computer.ComputerName
                        $object.ComputerName = $computer.ComputerName
                        $object.InstanceName = $instance
                        $object.DnsResolution = $resolution
                        $object.Ping = $pingReply.Status -like 'Success'
                        $object.ScanTypes = $ScanType
                        $object.Services = $services | Where-Object InstanceName -EQ $instance
                        $object.SystemServices = $services | Where-Object { -not $_.InstanceName }
                        $object.SPNs = $sPNs

                        if ($result = $browseResult | Where-Object InstanceName -EQ $instance) {
                            $object.BrowseReply = $result
                        }
                        if ($ports) {
                            $object.PortsScanned = $ports
                        }

                        if ($object.BrowseReply) {
                            $object.Confidence = 'Medium'
                            if ($object.BrowseReply.TCPPort) {
                                $object.Port = $object.BrowseReply.TCPPort

                                $object.PortsScanned | Where-Object Port -EQ $object.Port | ForEach-Object {
                                    $object.TcpConnected = $_.IsOpen
                                }
                            }
                        }
                        if ($object.Services) {
                            $object.Confidence = 'High'

                            $engine = $object.Services | Where-Object ServiceType -EQ "Engine"
                            switch ($engine.State) {
                                "Running" { $object.Availability = 'Available' }
                                "Stopped" { $object.Availability = 'Unavailable' }
                                default { $object.Availability = 'Unknown' }
                            }
                        }

                        $object.Timestamp = Get-Date

                        $masterList += $object
                    }
                    #endregion Case: Named instance found

                    #region Case: Port number found
                    foreach ($port in $portsDetected) {
                        if ($masterList.Port -contains $port) { continue }

                        $object = New-Object Sqlcollaborative.Dbatools.Discovery.DbaInstanceReport
                        $object.MachineName = $computer.ComputerName
                        $object.ComputerName = $computer.ComputerName
                        $object.Port = $port
                        $object.DnsResolution = $resolution
                        $object.Ping = $pingReply.Status -like 'Success'
                        $object.ScanTypes = $ScanType
                        $object.SystemServices = $services | Where-Object { -not $_.InstanceName }
                        $object.SPNs = $sPNs
                        $object.Confidence = 'Low'
                        if ($ports) {
                            $object.PortsScanned = $ports

                            if (($ports | Where-Object IsOpen).Port -eq 1433) {
                                $object.Confidence = 'Medium'
                            }
                        }

                        if (($ports.Port -contains $port) -and ($sPNs | Where-Object { $_ -like "*:$port" })) {
                            $object.Confidence = 'Medium'
                        }

                        $object.PortsScanned | Where-Object Port -EQ $object.Port | ForEach-Object {
                            $object.TcpConnected = $_.IsOpen
                        }
                        $object.Timestamp = Get-Date

                        if ($masterList.SqlInstance -contains $object.SqlInstance) {
                            continue
                        }

                        $masterList += $object
                    }
                    #endregion Case: Port number found
                    
                    if ($ScanType -band [Sqlcollaborative.Dbatools.Discovery.DbaInstanceScanType]::SqlConnect) {
                        $instanceHash = @{ }
                        $toDelete = @()
                        foreach ($dataSet in $masterList) {
                            try {
                                $server = Connect-SqlInstance -SqlInstance $dataSet.FullSmoName -SqlCredential $SqlCredential
                                $dataSet.SqlConnected = $true
                                $dataSet.Confidence = 'High'

                                # Remove duplicates
                                if ($instanceHash.ContainsKey($server.DomainInstanceName)) {
                                    $toDelete += $dataSet
                                } else {
                                    $instanceHash[$server.DomainInstanceName] = $dataSet

                                    try {
                                        $dataSet.MachineName = $server.ComputerNamePhysicalNetBIOS
                                    } catch {
                                        # here to avoid an empty catch
                                        $null = 1
                                    }
                                }
                            } catch {
                                # Error class definitions
                                # https://docs.microsoft.com/en-us/sql/relational-databases/errors-events/database-engine-error-severities
                                # 24 or less means an instance was found, but had some issues

                                #region Processing error (Access denied, server error, ...)
                                if ($_.Exception.InnerException.Errors.Class -lt 25) {
                                    # There IS an SQL Instance and it listened to network traffic
                                    $dataSet.SqlConnected = $true
                                    $dataSet.Confidence = 'High'
                                }
                                #endregion Processing error (Access denied, server error, ...)

                                #region Other connection errors
                                else {
                                    $dataSet.SqlConnected = $false
                                }
                                #endregion Other connection errors
                            }
                        }

                        foreach ($item in $toDelete) {
                            $masterList.Remove($item)
                        }
                    }

                    $masterList
                }
            }
        }

        function Get-DomainSPN {
            <#
            .SYNOPSIS
                Returns all computernames with registered MSSQL SPNs.

            .DESCRIPTION
                Returns all computernames with registered MSSQL SPNs.

            .PARAMETER DomainController
                The domain controller to ask.

            .PARAMETER Credential
                The credentials to use while asking.

            .PARAMETER ComputerName
                Filter by computername

            .PARAMETER GetSPN
                Returns the service SPNs instead of the hostname

            .EXAMPLE
                PS C:\> Get-DomainSPN -DomainController $DomainController -Credential $Credential

                Returns all computernames with MSQL SPNs known to $DomainController, assuming credentials are valid.
        #>
            [CmdletBinding()]
            param (
                [string]$DomainController,
                [Pscredential]$Credential,
                [string]$ComputerName = "*",
                [switch]$GetSPN
            )

            try {
                if ($DomainController) {
                    if ($Credential) {
                        $entry = New-Object -TypeName System.DirectoryServices.DirectoryEntry -ArgumentList "LDAP://$DomainController", $Credential.UserName, $Credential.GetNetworkCredential().Password
                    } else {
                        $entry = New-Object -TypeName System.DirectoryServices.DirectoryEntry -ArgumentList "LDAP://$DomainController"
                    }
                } else {
                    $entry = [ADSI]''
                }
                $objSearcher = New-Object -TypeName System.DirectoryServices.DirectorySearcher -ArgumentList $entry

                $objSearcher.PageSize = 200
                $objSearcher.Filter = "(&(objectcategory=computer)(servicePrincipalName=MSSQLsvc*)(|(name=$ComputerName)(dnshostname=$ComputerName)))"
                $objSearcher.SearchScope = 'Subtree'

                $results = $objSearcher.FindAll()
                foreach ($computer in $results) {
                    if ($GetSPN) {
                        $computer.Properties["serviceprincipalname"] | Where-Object { $_ -like "MSSQLsvc*:*" }
                    } else {
                        if ($computer.Properties["dnshostname"]) {
                            $computer.Properties["dnshostname"][0]
                        } else {
                            $computer.Properties["name"][0]
                        }
                    }
                }
            } catch {
                throw
            }
        }

        function Get-SQLInstanceBrowserUDP {
            <#
            .SYNOPSIS
                Requests a list of instances from the browser service.

            .DESCRIPTION
                Requests a list of instances from the browser service.

            .PARAMETER ComputerName
                Computer name or IP address to enumerate SQL Instance from.

            .PARAMETER UDPTimeOut
                Timeout in seconds. Longer timeout = more accurate.

            .PARAMETER EnableException
                By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
                This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
                Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

            .EXAMPLE
                PS C:\> Get-SQLInstanceBrowserUDP -ComputerName 'sql2017'

                Contacts the browsing service on sql2017 and requests its instance information.

            .NOTES
                Original Author: Eric Gruber
                Editors:
                - Scott Sutherland (Pipeline and timeout mods)
                - Friedrich Weinmann (Cleanup & dbatools Standardization)

        #>
            [CmdletBinding()]
            param (
                [Parameter(Mandatory, ValueFromPipeline)][DbaInstance[]]$ComputerName,
                [int]$UDPTimeOut = 2,
                [switch]$EnableException
            )

            process {
                foreach ($computer in $ComputerName) {
                    try {
                        #region Connect to browser service and receive response
                        $UDPClient = New-Object -TypeName System.Net.Sockets.Udpclient
                        $UDPClient.Client.ReceiveTimeout = $UDPTimeOut * 1000
                        $UDPClient.Connect($computer.ComputerName, 1434)
                        $UDPPacket = 0x03
                        $UDPEndpoint = New-Object -TypeName System.Net.IpEndPoint -ArgumentList ([System.Net.Ipaddress]::Any, 0)
                        $UDPClient.Client.Blocking = $true
                        [void]$UDPClient.Send($UDPPacket, $UDPPacket.Length)
                        $BytesRecived = $UDPClient.Receive([ref]$UDPEndpoint)
                        # Skip first three characters, since those contain trash data (SSRP metadata)
                        #$Response = [System.Text.Encoding]::ASCII.GetString($BytesRecived[3..($BytesRecived.Length - 1)])
                        $Response = [System.Text.Encoding]::ASCII.GetString($BytesRecived)
                        #endregion Connect to browser service and receive response

                        #region Parse Output
                        $Response | Select-String "(ServerName;(\w+);InstanceName;(\w+);IsClustered;(\w+);Version;(\d+\.\d+\.\d+\.\d+);(tcp;(\d+)){0,1})" -AllMatches | Select-Object -ExpandProperty Matches | ForEach-Object {
                            $obj = New-Object Sqlcollaborative.Dbatools.Discovery.DbaBrowserReply -Property @{
                                MachineName  = $computer.ComputerName
                                ComputerName = $_.Groups[2].Value
                                SqlInstance  = "$($_.Groups[2].Value)\$($_.Groups[3].Value)"
                                InstanceName = $_.Groups[3].Value
                                Version      = $_.Groups[5].Value
                                IsClustered  = "Yes" -eq $_.Groups[4].Value
                            }
                            if ($_.Groups[7].Success) {
                                $obj.TCPPort = $_.Groups[7].Value
                            }
                            $obj
                        }
                        #endregion Parse Output

                        $UDPClient.Close()
                    } catch {
                        try {
                            $UDPClient.Close()
                        } catch {
                            # here to avoid an empty catch
                            $null = 1
                        }

                        if ($EnableException) { throw }
                    }
                }
            }
        }

        function Test-TcpPort {
            <#
            .SYNOPSIS
                Tests whether a TCP Port is open or not.

            .DESCRIPTION
                Tests whether a TCP Port is open or not.

            .PARAMETER ComputerName
                The name of the computer to scan.

            .PARAMETER Port
                The port(s) to scan.

            .EXAMPLE
                PS C:\> $ports | Test-TcpPort -ComputerName "foo"

                Tests for each port in $ports whether the TCP port is open on computer "foo"
        #>
            [CmdletBinding()]
            param (
                [DbaInstance]$ComputerName,
                [Parameter(ValueFromPipeline)][int[]]$Port
            )

            begin {
                $client = New-Object Net.Sockets.TcpClient
            }
            process {
                foreach ($item in $Port) {
                    try {
                        $client.Connect($ComputerName.ComputerName, $item)
                        if ($client.Connected) {
                            $client.Close()
                            New-Object -TypeName Sqlcollaborative.Dbatools.Discovery.DbaPortReport -ArgumentList $ComputerName.ComputerName, $item, $true
                        } else {
                            New-Object -TypeName Sqlcollaborative.Dbatools.Discovery.DbaPortReport -ArgumentList $ComputerName.ComputerName, $item, $false
                        }
                    } catch {
                        New-Object -TypeName Sqlcollaborative.Dbatools.Discovery.DbaPortReport -ArgumentList $ComputerName.ComputerName, $item, $false
                    }
                }
            }
        }

        function Get-IPrange {
            <#
            .SYNOPSIS
                Get the IP addresses in a range

            .DESCRIPTION
                A detailed description of the Get-IPrange function.

            .PARAMETER Start
                A description of the Start parameter.

            .PARAMETER End
                A description of the End parameter.

            .PARAMETER IPAddress
                A description of the IPAddress parameter.

            .PARAMETER Mask
                A description of the Mask parameter.

            .PARAMETER Cidr
                A description of the Cidr parameter.

            .EXAMPLE
                Get-IPrange -Start 192.168.8.2 -End 192.168.8.20

            .EXAMPLE
                Get-IPrange -IPAddress 192.168.8.2 -Mask 255.255.255.0

            .EXAMPLE
                Get-IPrange -IPAddress 192.168.8.3 -Cidr 24

            .NOTES
                Author: BarryCWT
                Reference: https://gallery.technet.microsoft.com/scriptcenter/List-the-IP-addresses-in-a-60c5bb6b
        #>

            param
            (
                [string]$Start,
                [string]$End,
                [string]$IPAddress,
                [string]$Mask,
                [int]$Cidr
            )

            function IP-toINT64 {
                param ($ip)

                $octets = $ip.split(".")
                return [int64]([int64]$octets[0] * 16777216 + [int64]$octets[1] * 65536 + [int64]$octets[2] * 256 + [int64]$octets[3])
            }

            function INT64-toIP {
                param ([int64]$int)

                return ([System.Net.IPAddress](([math]::truncate($int / 16777216)).tostring() + "." + ([math]::truncate(($int % 16777216) / 65536)).tostring() + "." + ([math]::truncate(($int % 65536) / 256)).tostring() + "." + ([math]::truncate($int % 256)).tostring()))
            }

            if ($Cidr) {
                $maskaddr = [Net.IPAddress]::Parse((INT64-toIP -int ([convert]::ToInt64(("1" * $Cidr + "0" * (32 - $Cidr)), 2))))
            }
            if ($Mask) {
                $maskaddr = [Net.IPAddress]::Parse($Mask)
            }
            if ($IPAddress) {
                $ipaddr = [Net.IPAddress]::Parse($IPAddress)
                $networkaddr = new-object net.ipaddress ($maskaddr.address -band $ipaddr.address)
                $broadcastaddr = new-object net.ipaddress (([system.net.ipaddress]::parse("255.255.255.255").address -bxor $maskaddr.address -bor $networkaddr.address))
                $startaddr = IP-toINT64 -ip $networkaddr.ipaddresstostring
                $endaddr = IP-toINT64 -ip $broadcastaddr.ipaddresstostring
            } else {
                $startaddr = IP-toINT64 -ip $Start
                $endaddr = IP-toINT64 -ip $End
            }

            for ($i = $startaddr; $i -le $endaddr; $i++) {
                INT64-toIP -int $i
            }
        }

        function Resolve-IPRange {
            <#
            .SYNOPSIS
                Returns a number of IPAddresses based on range specified.

            .DESCRIPTION
                Returns a number of IPAddresses based on range specified.
                Warning: A too large range can lead to memory exceptions.

                Scans subnet of active computer if no address is specified.

            .PARAMETER IpAddress
                The address / range / mask / cidr to scan. Example input:
                - 10.1.1.1
                - 10.1.1.1/24
                - 10.1.1.1-10.1.1.254
                - 10.1.1.1/255.255.255.0
        #>
            [CmdletBinding()]
            param (
                [AllowEmptyString()][string]$IpAddress
            )

            #region Scan defined range
            if ($IpAddress) {
                #region Determine processing mode
                $mode = 'Unknown'
                if ($IpAddress -like "*/*") {
                    $parts = $IpAddress.Split("/")

                    $address = $parts[0]
                    if ($parts[1] -match ([dbargx]::IPv4)) {
                        $mask = $parts[1]
                        $mode = 'Mask'
                    } elseif ($parts[1] -as [int]) {
                        $cidr = [int]$parts[1]

                        if (($cidr -lt 8) -or ($cidr -gt 31)) {
                            throw "$IpAddress does not contain a valid cidr mask!"
                        }

                        $mode = 'CIDR'
                    } else {
                        throw "$IpAddress is not a valid IP Range!"
                    }
                } elseif ($IpAddress -like "*-*") {
                    $rangeStart = $IpAddress.Split("-")[0]
                    $rangeEnd = $IpAddress.Split("-")[1]

                    if ($rangeStart -notmatch ([dbargx]::IPv4)) {
                        throw "$IpAddress is not a valid IP Range!"
                    }
                    if ($rangeEnd -notmatch ([dbargx]::IPv4)) {
                        throw "$IpAddress is not a valid IP Range!"
                    }

                    $mode = 'Range'
                } else {
                    if ($IpAddress -notmatch ([dbargx]::IPv4)) {
                        throw "$IpAddress is not a valid IP Address!"
                    }
                    return $IpAddress
                }
                #endregion Determine processing mode

                switch ($mode) {
                    'CIDR' {
                        Get-IPrange -IPAddress $address -Cidr $cidr
                    }
                    'Mask' {
                        Get-IPrange -IPAddress $address -Mask $mask
                    }
                    'Range' {
                        Get-IPrange -Start $rangeStart -End $rangeEnd
                    }
                }
            }
            #endregion Scan defined range

            #region Scan own computer range
            else {
                foreach ($interface in ([System.Net.NetworkInformation.NetworkInterface]::GetAllNetworkInterfaces() | Where-Object NetworkInterfaceType -Like '*Ethernet*')) {
                    foreach ($property in ($interface.GetIPProperties().UnicastAddresses | Where-Object { $_.Address.AddressFamily -like "InterNetwork" })) {
                        Get-IPrange -IPAddress $property.Address -Cidr $property.PrefixLength
                    }
                }
            }
            #endregion Scan own computer range
        }
        #endregion Utility Functions

        #region Build parameter Splat for scan
        $paramTestSqlInstance = @{
            ScanType          = $ScanType
            TCPPort           = $TCPPort
            EnableException   = $EnableException
            MinimumConfidence = $MinimumConfidence
        }

        # Only specify when passed by user to avoid credential prompts on PS3/4
        if ($SqlCredential) {
            $paramTestSqlInstance["SqlCredential"] = $SqlCredential
        }
        if ($Credential) {
            $paramTestSqlInstance["Credential"] = $Credential
        }
        if ($DomainController) {
            $paramTestSqlInstance["DomainController"] = $DomainController
        }
        #endregion Build parameter Splat for scan

        # Prepare item processing in a pipeline compliant way
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand('Test-SqlInstance', [System.Management.Automation.CommandTypes]::Function)
        $scriptCmd = {
            & $wrappedCmd @paramTestSqlInstance
        }
        $steppablePipeline = $scriptCmd.GetSteppablePipeline()
        $steppablePipeline.Begin($true)
    }

    process {
        if (Test-FunctionInterrupt) { return }
        #region Process items or discover stuff
        switch ($PSCmdlet.ParameterSetName) {
            'Computer' {
                $ComputerName | Invoke-SteppablePipeline -Pipeline $steppablePipeline
            }
            'Discover' {
                #region Discovery: DataSource Enumeration
                if ($DiscoveryType -band ([Sqlcollaborative.Dbatools.Discovery.DbaInstanceDiscoveryType]::DataSourceEnumeration)) {
                    try {
                        # Discover instances
                        foreach ($instance in ([System.Data.Sql.SqlDataSourceEnumerator]::Instance.GetDataSources())) {
                            if ($instance.InstanceName -ne [System.DBNull]::Value) {
                                $steppablePipeline.Process("$($instance.Servername)\$($instance.InstanceName)")
                            } else {
                                $steppablePipeline.Process($instance.Servername)
                            }
                        }
                    } catch {
                        Write-Message -Level Warning -Message "Datasource enumeration failed" -ErrorRecord $_ -EnableException $EnableException.ToBool()
                    }
                }
                #endregion Discovery: DataSource Enumeration

                #region Discovery: SPN Search
                if ($DiscoveryType -band ([Sqlcollaborative.Dbatools.Discovery.DbaInstanceDiscoveryType]::Domain)) {
                    try {
                        Get-DomainSPN -DomainController $DomainController -Credential $Credential -ErrorAction Stop | Invoke-SteppablePipeline -Pipeline $steppablePipeline
                    } catch {
                        Write-Message -Level Warning -Message "Failed to execute Service Principal Name discovery" -ErrorRecord $_ -EnableException $EnableException.ToBool()
                    }
                }
                #endregion Discovery: SPN Search

                #region Discovery: IP Range
                if ($DiscoveryType -band ([Sqlcollaborative.Dbatools.Discovery.DbaInstanceDiscoveryType]::IPRange)) {
                    if ($IpAddress) {
                        foreach ($address in $IpAddress) {
                            Resolve-IPRange -IpAddress $address | Invoke-SteppablePipeline -Pipeline $steppablePipeline
                        }
                    } else {
                        Resolve-IPRange | Invoke-SteppablePipeline -Pipeline $steppablePipeline
                    }
                }
                #endregion Discovery: IP Range
            }
            default {
                Stop-Function -Message "Invalid parameterset, some developer probably had a beer too much. Please file an issue so we can fix this" -EnableException $EnableException
                return
            }
        }
        #endregion Process items or discover stuff
    }

    end {
        if (Test-FunctionInterrupt) {
            return
        }
        $steppablePipeline.End()
    }
}

tools\dbatools\functions\Find-DbaDuplicateIndex.ps1

function Find-DbaDuplicateIndex {
    <#
    .SYNOPSIS
        Find duplicate and overlapping indexes.

    .DESCRIPTION
        This command will help you to find duplicate and overlapping indexes on a database or a list of databases.

        On SQL Server 2008 and higher, the IsFiltered property will also be checked

        Only supports CLUSTERED and NONCLUSTERED indexes.

        Output:
        TableName
        IndexName
        KeyColumns
        IncludedColumns
        IndexSizeMB
        IndexType
        CompressionDescription (When 2008+)
        [RowCount]
        IsDisabled
        IsFiltered (When 2008+)

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The database(s) to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER IncludeOverlapping
        If this switch is enabled, indexes which are partially duplicated will be returned.

        Example: If the first key column is the same between two indexes, but one has included columns and the other not, this will be shown.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Index
        Author: Claudio Silva (@ClaudioESSilva)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Find-DbaDuplicateIndex

    .EXAMPLE
        PS C:\> Find-DbaDuplicateIndex -SqlInstance sql2005

        Returns duplicate indexes found on sql2005

    .EXAMPLE
        PS C:\> Find-DbaDuplicateIndex -SqlInstance sql2017 -SqlCredential sqladmin

        Finds exact duplicate indexes on all user databases present on sql2017, using SQL authentication.

    .EXAMPLE
        PS C:\> Find-DbaDuplicateIndex -SqlInstance sql2017 -Database db1, db2

        Finds exact duplicate indexes on the db1 and db2 databases.

    .EXAMPLE
        PS C:\> Find-DbaDuplicateIndex -SqlInstance sql2017 -IncludeOverlapping

        Finds both duplicate and overlapping indexes on all user databases.

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [switch]$IncludeOverlapping,
        [switch]$EnableException
    )

    begin {
        $exactDuplicateQuery2005 = "
            WITH CTE_IndexCols
            AS (
                SELECT i.[object_id]
                    ,i.index_id
                    ,OBJECT_SCHEMA_NAME(i.[object_id]) AS SchemaName
                    ,OBJECT_NAME(i.[object_id]) AS TableName
                    ,NAME AS IndexName
                    ,ISNULL(STUFF((
                                SELECT ', ' + col.NAME + ' ' + CASE
                                        WHEN idxCol.is_descending_key = 1
                                            THEN 'DESC'
                                        ELSE 'ASC'
                                        END -- Include column order (ASC / DESC)
                                FROM sys.index_columns idxCol
                                INNER JOIN sys.columns col ON idxCol.[object_id] = col.[object_id]
                                    AND idxCol.column_id = col.column_id
                                WHERE i.[object_id] = idxCol.[object_id]
                                    AND i.index_id = idxCol.index_id
                                    AND idxCol.is_included_column = 0
                                ORDER BY idxCol.key_ordinal
                                FOR XML PATH('')
                                ), 1, 2, ''), '') AS KeyColumns
                    ,ISNULL(STUFF((
                                SELECT ', ' + col.NAME + ' ' + CASE
                                        WHEN idxCol.is_descending_key = 1
                                            THEN 'DESC'
                                        ELSE 'ASC'
                                        END -- Include column order (ASC / DESC)
                                FROM sys.index_columns idxCol
                                INNER JOIN sys.columns col ON idxCol.[object_id] = col.[object_id]
                                    AND idxCol.column_id = col.column_id
                                WHERE i.[object_id] = idxCol.[object_id]
                                    AND i.index_id = idxCol.index_id
                                    AND idxCol.is_included_column = 1
                                ORDER BY idxCol.key_ordinal
                                FOR XML PATH('')
                                ), 1, 2, ''), '') AS IncludedColumns
                    ,i.[type_desc] AS IndexType
                    ,i.is_disabled AS IsDisabled
                FROM sys.indexes AS i
                WHERE i.index_id > 0 -- Exclude HEAPS
                    AND i.[type_desc] IN (
                        'CLUSTERED'
                        ,'NONCLUSTERED'
                        )
                    AND OBJECT_SCHEMA_NAME(i.[object_id]) <> 'sys'
                )
                ,CTE_IndexSpace
            AS (
                SELECT s.[object_id]
                    ,s.index_id
                    ,SUM(s.[used_page_count]) * 8 / 1024.0 AS IndexSizeMB
                    ,SUM(p.[rows]) AS [RowCount]
                FROM sys.dm_db_partition_stats AS s
                INNER JOIN sys.partitions p WITH (NOLOCK) ON s.[partition_id] = p.[partition_id]
                    AND s.[object_id] = p.[object_id]
                    AND s.index_id = p.index_id
                WHERE s.index_id > 0 -- Exclude HEAPS
                    AND OBJECT_SCHEMA_NAME(s.[object_id]) <> 'sys'
                GROUP BY s.[object_id]
                    ,s.index_id
                )
            SELECT DB_NAME() AS DatabaseName
                ,CI1.SchemaName + '.' + CI1.TableName AS 'TableName'
                ,CI1.IndexName
                ,CI1.KeyColumns
                ,CI1.IncludedColumns
                ,CI1.IndexType
                ,COALESCE(CSPC.IndexSizeMB,0) AS 'IndexSizeMB'
                ,COALESCE(CSPC.[RowCount],0) AS 'RowCount'
                ,CI1.IsDisabled
            FROM CTE_IndexCols AS CI1
            LEFT JOIN CTE_IndexSpace AS CSPC ON CI1.[object_id] = CSPC.[object_id]
                AND CI1.index_id = CSPC.index_id
            WHERE EXISTS (
                    SELECT 1
                    FROM CTE_IndexCols CI2
                    WHERE CI1.SchemaName = CI2.SchemaName
                        AND CI1.TableName = CI2.TableName
                        AND CI1.KeyColumns = CI2.KeyColumns
                        AND CI1.IncludedColumns = CI2.IncludedColumns
                        AND CI1.IndexName <> CI2.IndexName
                    )"

        $overlappingQuery2005 = "
            WITH CTE_IndexCols
            AS (
                SELECT i.[object_id]
                    ,i.index_id
                    ,OBJECT_SCHEMA_NAME(i.[object_id]) AS SchemaName
                    ,OBJECT_NAME(i.[object_id]) AS TableName
                    ,NAME AS IndexName
                    ,ISNULL(STUFF((
                                SELECT ', ' + col.NAME + ' ' + CASE
                                        WHEN idxCol.is_descending_key = 1
                                            THEN 'DESC'
                                        ELSE 'ASC'
                                        END -- Include column order (ASC / DESC)
                                FROM sys.index_columns idxCol
                                INNER JOIN sys.columns col ON idxCol.[object_id] = col.[object_id]
                                    AND idxCol.column_id = col.column_id
                                WHERE i.[object_id] = idxCol.[object_id]
                                    AND i.index_id = idxCol.index_id
                                    AND idxCol.is_included_column = 0
                                ORDER BY idxCol.key_ordinal
                                FOR XML PATH('')
                                ), 1, 2, ''), '') AS KeyColumns
                    ,ISNULL(STUFF((
                                SELECT ', ' + col.NAME + ' ' + CASE
                                        WHEN idxCol.is_descending_key = 1
                                            THEN 'DESC'
                                        ELSE 'ASC'
                                        END -- Include column order (ASC / DESC)
                                FROM sys.index_columns idxCol
                                INNER JOIN sys.columns col ON idxCol.[object_id] = col.[object_id]
                                    AND idxCol.column_id = col.column_id
                                WHERE i.[object_id] = idxCol.[object_id]
                                    AND i.index_id = idxCol.index_id
                                    AND idxCol.is_included_column = 1
                                ORDER BY idxCol.key_ordinal
                                FOR XML PATH('')
                                ), 1, 2, ''), '') AS IncludedColumns
                    ,i.[type_desc] AS IndexType
                    ,i.is_disabled AS IsDisabled
                FROM sys.indexes AS i
                WHERE i.index_id > 0 -- Exclude HEAPS
                    AND i.[type_desc] IN (
                        'CLUSTERED'
                        ,'NONCLUSTERED'
                        )
                    AND OBJECT_SCHEMA_NAME(i.[object_id]) <> 'sys'
                )
                ,CTE_IndexSpace
            AS (
                SELECT s.[object_id]
                    ,s.index_id
                    ,SUM(s.[used_page_count]) * 8 / 1024.0 AS IndexSizeMB
                    ,SUM(p.[rows]) AS [RowCount]
                FROM sys.dm_db_partition_stats AS s
                INNER JOIN sys.partitions p WITH (NOLOCK) ON s.[partition_id] = p.[partition_id]
                    AND s.[object_id] = p.[object_id]
                    AND s.index_id = p.index_id
                WHERE s.index_id > 0 -- Exclude HEAPS
                    AND OBJECT_SCHEMA_NAME(s.[object_id]) <> 'sys'
                GROUP BY s.[object_id]
                    ,s.index_id
                )
            SELECT DB_NAME() AS DatabaseName
                ,CI1.SchemaName + '.' + CI1.TableName AS 'TableName'
                ,CI1.IndexName
                ,CI1.KeyColumns
                ,CI1.IncludedColumns
                ,CI1.IndexType
                ,COALESCE(CSPC.IndexSizeMB,0) AS 'IndexSizeMB'
                ,COALESCE(CSPC.[RowCount],0) AS 'RowCount'
                ,CI1.IsDisabled
            FROM CTE_IndexCols AS CI1
            LEFT JOIN CTE_IndexSpace AS CSPC ON CI1.[object_id] = CSPC.[object_id]
                AND CI1.index_id = CSPC.index_id
            WHERE EXISTS (
                    SELECT 1
                    FROM CTE_IndexCols CI2
                    WHERE CI1.SchemaName = CI2.SchemaName
                        AND CI1.TableName = CI2.TableName
                        AND (
                            (
                                CI1.KeyColumns LIKE CI2.KeyColumns + '%'
                                AND SUBSTRING(CI1.KeyColumns, LEN(CI2.KeyColumns) + 1, 1) = ' '
                                )
                            OR (
                                CI2.KeyColumns LIKE CI1.KeyColumns + '%'
                                AND SUBSTRING(CI2.KeyColumns, LEN(CI1.KeyColumns) + 1, 1) = ' '
                                )
                            )
                        AND CI1.IndexName <> CI2.IndexName
                    )"

        # Support Compression 2008+
        $exactDuplicateQuery = "
            WITH CTE_IndexCols
            AS (
                SELECT i.[object_id]
                    ,i.index_id
                    ,OBJECT_SCHEMA_NAME(i.[object_id]) AS SchemaName
                    ,OBJECT_NAME(i.[object_id]) AS TableName
                    ,NAME AS IndexName
                    ,ISNULL(STUFF((
                                SELECT ', ' + col.NAME + ' ' + CASE
                                        WHEN idxCol.is_descending_key = 1
                                            THEN 'DESC'
                                        ELSE 'ASC'
                                        END -- Include column order (ASC / DESC)
                                FROM sys.index_columns idxCol
                                INNER JOIN sys.columns col ON idxCol.[object_id] = col.[object_id]
                                    AND idxCol.column_id = col.column_id
                                WHERE i.[object_id] = idxCol.[object_id]
                                    AND i.index_id = idxCol.index_id
                                    AND idxCol.is_included_column = 0
                                ORDER BY idxCol.key_ordinal
                                FOR XML PATH('')
                                ), 1, 2, ''), '') AS KeyColumns
                    ,ISNULL(STUFF((
                                SELECT ', ' + col.NAME + ' ' + CASE
                                        WHEN idxCol.is_descending_key = 1
                                            THEN 'DESC'
                                        ELSE 'ASC'
                                        END -- Include column order (ASC / DESC)
                                FROM sys.index_columns idxCol
                                INNER JOIN sys.columns col ON idxCol.[object_id] = col.[object_id]
                                    AND idxCol.column_id = col.column_id
                                WHERE i.[object_id] = idxCol.[object_id]
                                    AND i.index_id = idxCol.index_id
                                    AND idxCol.is_included_column = 1
                                ORDER BY idxCol.key_ordinal
                                FOR XML PATH('')
                                ), 1, 2, ''), '') AS IncludedColumns
                    ,i.[type_desc] AS IndexType
                    ,i.is_disabled AS IsDisabled
                    ,i.has_filter AS IsFiltered
                FROM sys.indexes AS i
                WHERE i.index_id > 0 -- Exclude HEAPS
                    AND i.[type_desc] IN (
                        'CLUSTERED'
                        ,'NONCLUSTERED'
                        )
                    AND OBJECT_SCHEMA_NAME(i.[object_id]) <> 'sys'
                )
                ,CTE_IndexSpace
            AS (
                SELECT s.[object_id]
                    ,s.index_id
                    ,SUM(s.[used_page_count]) * 8 / 1024.0 AS IndexSizeMB
                    ,SUM(p.[rows]) AS [RowCount]
                    ,p.data_compression_desc AS CompressionDescription
                FROM sys.dm_db_partition_stats AS s
                INNER JOIN sys.partitions p WITH (NOLOCK) ON s.[partition_id] = p.[partition_id]
                    AND s.[object_id] = p.[object_id]
                    AND s.index_id = p.index_id
                WHERE s.index_id > 0 -- Exclude HEAPS
                    AND OBJECT_SCHEMA_NAME(s.[object_id]) <> 'sys'
                GROUP BY s.[object_id]
                    ,s.index_id
                    ,p.data_compression_desc
                )
            SELECT DB_NAME() AS DatabaseName
                ,CI1.SchemaName + '.' + CI1.TableName AS 'TableName'
                ,CI1.IndexName
                ,CI1.KeyColumns
                ,CI1.IncludedColumns
                ,CI1.IndexType
                ,COALESCE(CSPC.IndexSizeMB,0) AS 'IndexSizeMB'
                ,COALESCE(CSPC.CompressionDescription, 'NONE') AS 'CompressionDescription'
                ,COALESCE(CSPC.[RowCount],0) AS 'RowCount'
                ,CI1.IsDisabled
                ,CI1.IsFiltered
            FROM CTE_IndexCols AS CI1
            LEFT JOIN CTE_IndexSpace AS CSPC ON CI1.[object_id] = CSPC.[object_id]
                AND CI1.index_id = CSPC.index_id
            WHERE EXISTS (
                    SELECT 1
                    FROM CTE_IndexCols CI2
                    WHERE CI1.SchemaName = CI2.SchemaName
                        AND CI1.TableName = CI2.TableName
                        AND CI1.KeyColumns = CI2.KeyColumns
                        AND CI1.IncludedColumns = CI2.IncludedColumns
                        AND CI1.IsFiltered = CI2.IsFiltered
                        AND CI1.IndexName <> CI2.IndexName
                    )"

        $overlappingQuery = "
            WITH CTE_IndexCols AS
            (
                SELECT
                        i.[object_id]
                        ,i.index_id
                        ,OBJECT_SCHEMA_NAME(i.[object_id]) AS SchemaName
                        ,OBJECT_NAME(i.[object_id]) AS TableName
                        ,Name AS IndexName
                        ,ISNULL(STUFF((SELECT ', ' + col.NAME + ' ' + CASE
                                                                    WHEN idxCol.is_descending_key = 1 THEN 'DESC'
                                                                    ELSE 'ASC'
                                                                END -- Include column order (ASC / DESC)
                                FROM sys.index_columns idxCol
                                    INNER JOIN sys.columns col
                                    ON idxCol.[object_id] = col.[object_id]
                                    AND idxCol.column_id = col.column_id
                                WHERE i.[object_id] = idxCol.[object_id]
                                AND i.index_id = idxCol.index_id
                                AND idxCol.is_included_column = 0
                                ORDER BY idxCol.key_ordinal
                        FOR XML PATH('')), 1, 2, ''), '') AS KeyColumns
                        ,ISNULL(STUFF((SELECT ', ' + col.NAME + ' ' + CASE
                                                                    WHEN idxCol.is_descending_key = 1 THEN 'DESC'
                                                                    ELSE 'ASC'
                                                                END -- Include column order (ASC / DESC)
                                FROM sys.index_columns idxCol
                                    INNER JOIN sys.columns col
                                    ON idxCol.[object_id] = col.[object_id]
                                    AND idxCol.column_id = col.column_id
                                WHERE i.[object_id] = idxCol.[object_id]
                                AND i.index_id = idxCol.index_id
                                AND idxCol.is_included_column = 1
                                ORDER BY idxCol.key_ordinal
                        FOR XML PATH('')), 1, 2, ''), '') AS IncludedColumns
                        ,i.[type_desc] AS IndexType
                        ,i.is_disabled AS IsDisabled
                        ,i.has_filter AS IsFiltered
                FROM sys.indexes AS i
                WHERE i.index_id > 0 -- Exclude HEAPS
                AND i.[type_desc] IN ('CLUSTERED', 'NONCLUSTERED')
                AND OBJECT_SCHEMA_NAME(i.[object_id]) <> 'sys'
            ),
            CTE_IndexSpace AS
            (
            SELECT
                        s.[object_id]
                        ,s.index_id
                        ,SUM(s.[used_page_count]) * 8 / 1024.0 AS IndexSizeMB
                        ,SUM(p.[rows]) AS [RowCount]
                        ,p.data_compression_desc AS CompressionDescription
                FROM sys.dm_db_partition_stats AS s
                    INNER JOIN sys.partitions p WITH (NOLOCK)
                    ON s.[partition_id] = p.[partition_id]
                    AND s.[object_id] = p.[object_id]
                    AND s.index_id = p.index_id
                WHERE s.index_id > 0 -- Exclude HEAPS
                    AND OBJECT_SCHEMA_NAME(s.[object_id]) <> 'sys'
                GROUP BY s.[object_id], s.index_id, p.data_compression_desc
            )
            SELECT
                    DB_NAME() AS DatabaseName
                    ,CI1.SchemaName + '.' + CI1.TableName AS 'TableName'
                    ,CI1.IndexName
                    ,CI1.KeyColumns
                    ,CI1.IncludedColumns
                    ,CI1.IndexType
                    ,COALESCE(CSPC.IndexSizeMB,0) AS 'IndexSizeMB'
                    ,COALESCE(CSPC.CompressionDescription, 'NONE') AS 'CompressionDescription'
                    ,COALESCE(CSPC.[RowCount],0) AS 'RowCount'
                    ,CI1.IsDisabled
                    ,CI1.IsFiltered
            FROM CTE_IndexCols AS CI1
                LEFT JOIN CTE_IndexSpace AS CSPC
                ON CI1.[object_id] = CSPC.[object_id]
                AND CI1.index_id = CSPC.index_id
            WHERE EXISTS (SELECT 1
                            FROM CTE_IndexCols CI2
                        WHERE CI1.SchemaName = CI2.SchemaName
                            AND CI1.TableName = CI2.TableName
                            AND (
                                        (CI1.KeyColumns like CI2.KeyColumns + '%' and SUBSTRING(CI1.KeyColumns,LEN(CI2.KeyColumns)+1,1) = ' ')
                                    OR (CI2.KeyColumns like CI1.KeyColumns + '%' and SUBSTRING(CI2.KeyColumns,LEN(CI1.KeyColumns)+1,1) = ' ')
                                )
                            AND CI1.IsFiltered = CI2.IsFiltered
                            AND CI1.IndexName <> CI2.IndexName
                        )"
    }
    process {
        if (Test-FunctionInterrupt) { return }

        foreach ($instance in $sqlinstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            if ($database) {
                $databases = $server.Databases | Where-Object Name -in $database
            } else {
                $databases = $server.Databases | Where-Object IsAccessible -eq $true
            }

            foreach ($db in $databases) {
                try {
                    Write-Message -Level Verbose -Message "Getting indexes from database '$db'."

                    $query = if ($server.versionMajor -eq 9) {
                        if ($IncludeOverlapping) { $overlappingQuery2005 }
                        else { $exactDuplicateQuery2005 }
                    } else {
                        if ($IncludeOverlapping) { $overlappingQuery }
                        else { $exactDuplicateQuery }
                    }

                    $db.Query($query)

                } catch {
                    Stop-Function -Message "Query failure" -Target $db
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Get-SqlDuplicateIndex
    }
}

tools\dbatools\functions\Get-DbaCpuUsage.ps1

function Get-DbaCpuUsage {
    <#
    .SYNOPSIS
        Provides detailed CPU usage information about a SQL Server's process

    .DESCRIPTION
        "If there are a lot of processes running on your instance and the CPU is very high,
        then it's hard to find the exact process eating up your CPU using just the SQL Server
        tools. One way to correlate the data between what is running within SQL Server and at
        the Windows level is to use SPID and KPID values to get the exact process."

        This command automates that process.

        References: https://www.mssqltips.com/sqlservertip/2454/how-to-find-out-how-much-cpu-a-sql-server-process-is-really-using/

        Note: This command returns results from all SQL instances on the destination server but the process
        column is specific to -SqlInstance passed.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Allows you to login to the SQL instance using alternative credentials.

    .PARAMETER Credential
        Allows you to login to the Windows Server using alternative credentials.

    .PARAMETER Threshold
        CPU threshold.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: CPU
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaCpuUsage

    .EXAMPLE
        PS C:\> Get-DbaCpuUsage -SqlInstance sql2017

        Logs into the SQL Server instance "sql2017" and also the Computer itself (via WMI) to gather information

    .EXAMPLE
        PS C:\> $usage = Get-DbaCpuUsage -SqlInstance sql2017
        PS C:\> $usage.Process

        Explores the processes (from Get-DbaProcess) associated with the usage results

    .EXAMPLE
        PS C:\> Get-DbaCpuUsage -SqlInstance sql2017 -SqlCredential sqladmin -Credential ad\sqldba

        Logs into the SQL instance using the SQL Login 'sqladmin' and then Windows instance as 'ad\sqldba'

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "SqlServers")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [PSCredential]$Credential,
        [int]$Threshold = 0,
        [switch]$EnableException
    )
    begin {
        # This can likely be enumerated but I don't know hows
        $threadstates = [pscustomobject]@{
            0 = 'Initialized. It is recognized by the microkernel.'
            1 = 'Ready. It is prepared to run on the next available processor.'
            2 = 'Running. It is executing.'
            3 = 'Standby. It is about to run. Only one thread may be in this state at a time.'
            4 = 'Terminated. It is finished executing.'
            5 = 'Waiting. It is not ready for the processor. When ready, it will be rescheduled.'
            6 = 'Transition. The thread is waiting for resources other than the processor.'
            7 = 'Unknown. The thread state is unknown.'
        }

        $threadwaitreasons = [pscustomobject]@{
            0  = 'Executive'
            1  = 'FreePage'
            2  = 'PageIn'
            3  = 'PoolAllocation'
            4  = 'ExecutionDelay'
            5  = 'FreePage'
            6  = 'PageIn'
            7  = 'Executive'
            8  = 'FreePage'
            9  = 'PageIn'
            10 = 'PoolAllocation'
            11 = 'ExecutionDelay'
            12 = 'FreePage'
            13 = 'PageIn'
            14 = 'EventPairHigh'
            15 = 'EventPairLow'
            16 = 'LPCReceive'
            17 = 'LPCReply'
            18 = 'VirtualMemory'
            19 = 'PageOut'
            20 = 'Unknown'
        }
    }
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $processes = Get-DbaProcess -SqlInstance $server
            $threads = Get-DbaCmObject -ComputerName $instance.ComputerName -ClassName Win32_PerfFormattedData_PerfProc_Thread -Credential $Credential | Where-Object { $_.Name -like 'sql*' -and $_.PercentProcessorTime -ge $Threshold }

            if ($server.VersionMajor -eq 8) {
                $spidcollection = $server.Query("select spid, kpid from sysprocesses")
            } else {
                $spidcollection = $server.Query("select t.os_thread_id as kpid, s.session_id as spid
            from sys.dm_exec_sessions s
            join sys.dm_exec_requests er on s.session_id = er.session_id
            join sys.dm_os_workers w on er.task_address = w.task_address
            join sys.dm_os_threads t on w.thread_address = t.thread_address")
            }

            foreach ($thread in $threads) {
                $spid = ($spidcollection | Where-Object kpid -eq $thread.IDThread).spid
                $process = $processes | Where-Object spid -eq $spid
                $threadwaitreason = $thread.ThreadWaitReason
                $threadstate = $thread.ThreadState
                $ThreadStateValue = $threadstates.$threadstate
                $ThreadWaitReasonValue = $threadwaitreasons.$threadwaitreason

                Add-Member -Force -InputObject $thread -MemberType NoteProperty -Name ComputerName -value $server.ComputerName
                Add-Member -Force -InputObject $thread -MemberType NoteProperty -Name InstanceName -value $server.ServiceName
                Add-Member -Force -InputObject $thread -MemberType NoteProperty -Name SqlInstance -value $server.DomainInstanceName
                Add-Member -Force -InputObject $thread -MemberType NoteProperty -Name Processes -Value ($processes | Where-Object HostProcessID -eq $thread.IDProcess)
                Add-Member -Force -InputObject $thread -MemberType NoteProperty -Name ThreadStateValue -Value $ThreadStateValue
                Add-Member -Force -InputObject $thread -MemberType NoteProperty -Name ThreadWaitReasonValue -Value $ThreadWaitReasonValue
                Add-Member -Force -InputObject $thread -MemberType NoteProperty -Name Process -Value $process
                Add-Member -Force -InputObject $thread -MemberType NoteProperty -Name Query -Value $process.LastQuery
                Add-Member -Force -InputObject $thread -MemberType NoteProperty -Name Spid -Value $spid

                Select-DefaultView -InputObject $thread -Property ComputerName, InstanceName, SqlInstance, Name, ContextSwitchesPersec, ElapsedTime, IDProcess, Spid, PercentPrivilegedTime, PercentProcessorTime, PercentUserTime, PriorityBase, PriorityCurrent, StartAddress, ThreadStateValue, ThreadWaitReasonValue, Process, Query
            }
        }
    }
}

tools\dbatools\functions\Get-DbaCredential.ps1

#ValidationTags#Messaging,FlowControl,CodeStyle#
function Get-DbaCredential {
    <#
    .SYNOPSIS
        Gets SQL Credential information for each instance(s) of SQL Server.

    .DESCRIPTION
        The Get-DbaCredential command gets SQL Credential information for each instance(s) of SQL Server.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function
        to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Name
        Only include specific names
        Note: if spaces exist in the credential name, you will have to type "" or '' around it.

    .PARAMETER ExcludeName
        Excluded credential names

    .PARAMETER Identity
        Only include specific identities
        Note: if spaces exist in the credential identity, you will have to type "" or '' around it.

    .PARAMETER ExcludeIdentity
        Excluded identities

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Credential
        Author: Garry Bargsley (@gbargsley), http://blog.garrybargsley.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaCredential

    .EXAMPLE
        PS C:\> Get-DbaCredential -SqlInstance localhost

        Returns all SQL Credentials on the local default SQL Server instance

    .EXAMPLE
        PS C:\> Get-DbaCredential -SqlInstance localhost, sql2016 -Name 'PowerShell Proxy'

        Returns the SQL Credentials named 'PowerShell Proxy' for the local and sql2016 SQL Server instances

    .EXAMPLE
        PS C:\> Get-DbaCredential -SqlInstance localhost, sql2016 -Identity ad\powershell

        Returns the SQL Credentials for the account 'ad\powershell' on the local and sql2016 SQL Server instances

    #>
    [CmdletBinding()]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSAvoidUsingPlainTextForPassword", "")]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$Name,
        [string[]]$ExcludeName,
        [Alias('CredentialIdentity')]
        [string[]]$Identity,
        [Alias('ExcludeCredentialIdentity')]
        [string[]]$ExcludeIdentity,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $credential = $server.Credentials

            if ($Name) {
                $credential = $credential | Where-Object { $Name -contains $_.Name }
            }

            if ($ExcludeName) {
                $credential = $credential | Where-Object { $ExcludeName -notcontains $_.Name }
            }

            if ($Identity) {
                $credential = $credential | Where-Object { $Identity -contains $_.Identity }
            }

            if ($ExcludeIdentity) {
                $credential = $credential | Where-Object { $ExcludeIdentity -notcontains $_.Identity }
            }

            foreach ($currentcredential in $credential) {
                Add-Member -Force -InputObject $currentcredential -MemberType NoteProperty -Name ComputerName -value $currentcredential.Parent.ComputerName
                Add-Member -Force -InputObject $currentcredential -MemberType NoteProperty -Name InstanceName -value $currentcredential.Parent.ServiceName
                Add-Member -Force -InputObject $currentcredential -MemberType NoteProperty -Name SqlInstance -value $currentcredential.Parent.DomainInstanceName

                Select-DefaultView -InputObject $currentcredential -Property ComputerName, InstanceName, SqlInstance, ID, Name, Identity, MappedClassType, ProviderName
            }
        }
    }
}

tools\dbatools\functions\Get-DbaCustomError.ps1

#ValidationTags#Messaging,FlowControl,CodeStyle#
function Get-DbaCustomError {
    <#
    .SYNOPSIS
        Gets SQL Custom Error Message information for each instance(s) of SQL Server.

    .DESCRIPTION
        The Get-DbaCustomError command gets SQL Custom Error Message information for each instance(s) of SQL Server.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function
        to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Error, CustomError
        Author: Garry Bargsley (@gbargsley), http://blog.garrybargsley.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaCustomError

    .EXAMPLE
        PS C:\> Get-DbaCustomError -SqlInstance localhost

        Returns all Custom Error Message(s) on the local default SQL Server instance

    .EXAMPLE
        PS C:\> Get-DbaCustomError -SqlInstance localhost, sql2016

        Returns all Custom Error Message(s) for the local and sql2016 SQL Server instances

    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            foreach ($customError in $server.UserDefinedMessages) {
                Add-Member -Force -InputObject $customError -MemberType NoteProperty -Name ComputerName -value $customError.Parent.ComputerName
                Add-Member -Force -InputObject $customError -MemberType NoteProperty -Name InstanceName -value $customError.Parent.ServiceName
                Add-Member -Force -InputObject $customError -MemberType NoteProperty -Name SqlInstance -value $customError.Parent.DomainInstanceName

                Select-DefaultView -InputObject $customError -Property ComputerName, InstanceName, SqlInstance, ID, Text, LanguageID, Language
            }
        }
    }
}

tools\dbatools\functions\Get-DbaDatabase.ps1

#ValidationTags#CodeStyle,Messaging,FlowControl,Pipeline#
function Get-DbaDatabase {
    <#
    .SYNOPSIS
        Gets SQL Database information for each database that is present on the target instance(s) of SQL Server.

    .DESCRIPTION
        The Get-DbaDatabase command gets SQL database information for each database that is present on the target instance(s) of
        SQL Server. If the name of the database is provided, the command will return only the specific database information.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. Defaults to localhost.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        Specifies one or more database(s) to process. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        Specifies one or more database(s) to exclude from processing.

    .PARAMETER ExcludeUser
        If this switch is enabled, only databases which are not User databases will be processed.

        This parameter cannot be used with -ExcludeSystem.

    .PARAMETER ExcludeSystem
        If this switch is enabled, only databases which are not System databases will be processed.

        This parameter cannot be used with -ExcludeUser.

    .PARAMETER Status
        Specifies one or more database statuses to filter on. Only databases in the status(es) listed will be returned. Valid options for this parameter are 'Emergency', 'Normal', 'Offline', 'Recovering', 'Restoring', 'Standby', and 'Suspect'.

    .PARAMETER Access
        Filters databases returned by their access type. Valid options for this parameter are 'ReadOnly' and 'ReadWrite'. If omitted, no filtering is performed.

    .PARAMETER Owner
        Specifies one or more database owners. Only databases owned by the listed owner(s) will be returned.

    .PARAMETER Encrypted
        If this switch is enabled, only databases which have Transparent Data Encryption (TDE) enabled will be returned.

    .PARAMETER RecoveryModel
        Filters databases returned by their recovery model. Valid options for this parameter are 'Full', 'Simple', and 'BulkLogged'.

    .PARAMETER NoFullBackup
        If this switch is enabled, only databases without a full backup recorded by SQL Server will be returned. This will also indicate which of these databases only have CopyOnly full backups.

    .PARAMETER NoFullBackupSince
        Only databases which haven't had a full backup since the specified DateTime will be returned.

    .PARAMETER NoLogBackup
        If this switch is enabled, only databases without a log backup recorded by SQL Server will be returned. This will also indicate which of these databases only have CopyOnly log backups.

    .PARAMETER NoLogBackupSince
        Only databases which haven't had a log backup since the specified DateTime will be returned.

    .PARAMETER IncludeLastUsed
        If this switch is enabled, the last used read & write times for each database will be returned. This data is retrieved from sys.dm_db_index_usage_stats which is reset when SQL Server is restarted.

    .PARAMETER OnlyAccessible
        If this switch is enabled, only accessible databases are returned (huge speedup in SMO enumeration)

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Database
        Author: Garry Bargsley (@gbargsley), http://blog.garrybargsley.com | Klaas Vandenberghe (@PowerDbaKlaas) | Simone Bizzotto ( @niphlod )

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaDatabase

    .EXAMPLE
        PS C:\> Get-DbaDatabase -SqlInstance localhost

        Returns all databases on the local default SQL Server instance.

    .EXAMPLE
        PS C:\> Get-DbaDatabase -SqlInstance localhost -ExcludeUser

        Returns only the system databases on the local default SQL Server instance.

    .EXAMPLE
        PS C:\> Get-DbaDatabase -SqlInstance localhost -ExcludeSystem

        Returns only the user databases on the local default SQL Server instance.

    .EXAMPLE
        PS C:\> 'localhost','sql2016' | Get-DbaDatabase

        Returns databases on multiple instances piped into the function.

    .EXAMPLE
        PS C:\> Get-DbaDatabase -SqlInstance SQL1\SQLExpress -RecoveryModel full,Simple

        Returns only the user databases in Full or Simple recovery model from SQL Server instance SQL1\SQLExpress.

    .EXAMPLE
        PS C:\> Get-DbaDatabase -SqlInstance SQL1\SQLExpress -Status Normal

        Returns only the user databases with status 'normal' from SQL Server instance SQL1\SQLExpress.

    .EXAMPLE
        PS C:\> Get-DbaDatabase -SqlInstance SQL1\SQLExpress -IncludeLastUsed

        Returns the databases from SQL Server instance SQL1\SQLExpress and includes the last used information
        from the sys.dm_db_index_usage_stats DMV.

    .EXAMPLE
        PS C:\> Get-DbaDatabase -SqlInstance SQL1\SQLExpress,SQL2 -ExcludeDatabase model,master

        Returns all databases except master and model from SQL Server instances SQL1\SQLExpress and SQL2.

    .EXAMPLE
        PS C:\> Get-DbaDatabase -SqlInstance SQL1\SQLExpress,SQL2 -Encrypted

        Returns only databases using TDE from SQL Server instances SQL1\SQLExpress and SQL2.

    .EXAMPLE
        PS C:\> Get-DbaDatabase -SqlInstance SQL1\SQLExpress,SQL2 -Access ReadOnly

        Returns only read only databases from SQL Server instances SQL1\SQLExpress and SQL2.

    .EXAMPLE
        PS C:\> Get-DbaDatabase -SqlInstance SQL2,SQL3 -Database OneDB,OtherDB

        Returns databases 'OneDb' and 'OtherDB' from SQL Server instances SQL2 and SQL3 if databases by those names exist on those instances.

    #>
    [CmdletBinding(DefaultParameterSetName = "Default")]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseSingularNouns", "", Justification = "Internal functions are ignored")]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [Alias("SystemDbOnly", "NoUserDb", "ExcludeAllUserDb")]
        [switch]$ExcludeUser,
        [Alias("UserDbOnly", "NoSystemDb", "ExcludeAllSystemDb")]
        [switch]$ExcludeSystem,
        [string[]]$Owner,
        [switch]$Encrypted,
        [ValidateSet('EmergencyMode', 'Normal', 'Offline', 'Recovering', 'Restoring', 'Standby', 'Suspect')]
        [string[]]$Status = @('EmergencyMode', 'Normal', 'Offline', 'Recovering', 'Restoring', 'Standby', 'Suspect'),
        [ValidateSet('ReadOnly', 'ReadWrite')]
        [string]$Access,
        [ValidateSet('Full', 'Simple', 'BulkLogged')]
        [string[]]$RecoveryModel = @('Full', 'Simple', 'BulkLogged'),
        [switch]$NoFullBackup,
        [datetime]$NoFullBackupSince,
        [switch]$NoLogBackup,
        [datetime]$NoLogBackupSince,
        [Alias('Silent')]
        [switch]$EnableException,
        [switch]$IncludeLastUsed,
        [switch]$OnlyAccessible
    )

    begin {

        if ($ExcludeUser -and $ExcludeSystem) {
            Stop-Function -Message "You cannot specify both ExcludeUser and ExcludeSystem." -Continue -EnableException $EnableException
        }

    }
    process {
        if (Test-FunctionInterrupt) { return }

        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            if (!$IncludeLastUsed) {
                $dblastused = $null
            } else {
                ## Get last used information from the DMV
                $querylastused = "WITH agg AS
                (
                  SELECT
                       max(last_user_seek) last_user_seek,
                       max(last_user_scan) last_user_scan,
                       max(last_user_lookup) last_user_lookup,
                       max(last_user_update) last_user_update,
                       sd.name dbname
                   FROM
                       sys.dm_db_index_usage_stats, master..sysdatabases sd
                   WHERE
                     database_id = sd.dbid AND database_id > 4
                      group by sd.name
                )
                SELECT
                   dbname,
                   last_read = MAX(last_read),
                   last_write = MAX(last_write)
                FROM
                (
                   SELECT dbname, last_user_seek, NULL FROM agg
                   UNION ALL
                   SELECT dbname, last_user_scan, NULL FROM agg
                   UNION ALL
                   SELECT dbname, last_user_lookup, NULL FROM agg
                   UNION ALL
                   SELECT dbname, NULL, last_user_update FROM agg
                ) AS x (dbname, last_read, last_write)
                GROUP BY
                   dbname
                ORDER BY 1;"
                # put a function around this to enable Pester Testing and also to ease any future changes
                function Invoke-QueryDBlastUsed {
                    $server.Query($querylastused)
                }
                $dblastused = Invoke-QueryDBlastUsed
            }

            if ($ExcludeUser) {
                $DBType = @($true)
            } elseif ($ExcludeSystem) {
                $DBType = @($false)
            } else {
                $DBType = @($false, $true)
            }

            $AccessibleFilter = switch ($OnlyAccessible) {
                $true { @($true) }
                default { @($true, $false) }
            }

            $Readonly = switch ($Access) {
                'Readonly' { @($true) }
                'ReadWrite' { @($false) }
                default { @($true, $false) }
            }
            $Encrypt = switch (Test-Bound $Encrypted) {
                $true { @($true) }
                default { @($true, $false, $null) }
            }
            function Invoke-QueryRawDatabases {
                try {
                    if ($server.VersionMajor -eq 8) {
                        $server.Query("SELECT *, SUSER_NAME(sid) AS [Owner] FROM master.dbo.sysdatabases")
                    } else {
                        $server.Query("SELECT *, SUSER_NAME(owner_sid) AS [Owner] FROM sys.databases")
                    }
                } catch {
                    Stop-Function -Message "Failure" -ErrorRecord $_
                }
            }
            $backed_info = Invoke-QueryRawDatabases
            $backed_info = $backed_info | Where-Object {
                ($_.name -in $Database -or !$Database) -and
                ($_.name -notin $ExcludeDatabase -or !$ExcludeDatabase) -and
                ($_.Owner -in $Owner -or !$Owner) -and
                ($_.state -ne 6 -or !$OnlyAccessible)
            }

            $inputObject = @()
            foreach ($dt in $backed_info) {
                $inputObject += $server.Databases | Where-Object Name -ceq $dt.name
            }
            $inputobject = $inputObject |
                Where-Object {
                ($_.Name -in $Database -or !$Database) -and
                ($_.Name -notin $ExcludeDatabase -or !$ExcludeDatabase) -and
                ($_.Owner -in $Owner -or !$Owner) -and
                $_.ReadOnly -in $Readonly -and
                $_.IsAccessible -in $AccessibleFilter -and
                $_.IsSystemObject -in $DBType -and
                ((Compare-Object @($_.Status.tostring().split(',').trim()) $Status -ExcludeDifferent -IncludeEqual).inputobject.count -ge 1 -or !$status) -and
                ($_.RecoveryModel -in $RecoveryModel -or !$_.RecoveryModel) -and
                $_.EncryptionEnabled -in $Encrypt
            }
            if ($NoFullBackup -or $NoFullBackupSince) {
                $dabs = (Get-DbaBackupHistory -SqlInstance $server -LastFull )
                if ($null -ne $NoFullBackupSince) {
                    $dabsWithinScope = ($dabs | Where-Object End -lt $NoFullBackupSince)

                    $inputobject = $inputobject | Where-Object { $_.Name -in $dabsWithinScope.Database -and $_.Name -ne 'tempdb' }
                } else {
                    $inputObject = $inputObject | Where-Object { $_.Name -notin $dabs.Database -and $_.Name -ne 'tempdb' }
                }

            }
            if ($NoLogBackup -or $NoLogBackupSince) {
                $dabs = (Get-DbaBackupHistory -SqlInstance $server -LastLog )
                if ($null -ne $NoLogBackupSince) {
                    $dabsWithinScope = ($dabs | Where-Object End -lt $NoLogBackupSince)
                    $inputobject = $inputobject |
                        Where-Object { $_.Name -in $dabsWithinScope.Database -and $_.Name -ne 'tempdb' -and $_.RecoveryModel -ne 'Simple' }
                } else {
                    $inputobject = $inputObject |
                        Where-Object { $_.Name -notin $dabs.Database -and $_.Name -ne 'tempdb' -and $_.RecoveryModel -ne 'Simple' }
                }
            }

            $defaults = 'ComputerName', 'InstanceName', 'SqlInstance', 'Name', 'Status', 'IsAccessible', 'RecoveryModel',
            'LogReuseWaitStatus', 'Size as SizeMB', 'CompatibilityLevel as Compatibility', 'Collation', 'Owner',
            'LastBackupDate as LastFullBackup', 'LastDifferentialBackupDate as LastDiffBackup',
            'LastLogBackupDate as LastLogBackup'

            if ($NoFullBackup -or $NoFullBackupSince -or $NoLogBackup -or $NoLogBackupSince) {
                $defaults += ('Notes')
            }
            if ($IncludeLastUsed) {
                # Add Last Used to the default view
                $defaults += ('LastRead as LastIndexRead', 'LastWrite as LastIndexWrite')
            }

            try {
                foreach ($db in $inputobject) {

                    $Notes = $null
                    if ($NoFullBackup -or $NoFullBackupSince) {
                        if (@($db.EnumBackupSets()).count -eq @($db.EnumBackupSets() | Where-Object { $_.IsCopyOnly }).count -and (@($db.EnumBackupSets()).count -gt 0)) {
                            $Notes = "Only CopyOnly backups"
                        }
                    }

                    $lastusedinfo = $dblastused | Where-Object { $_.dbname -eq $db.name }
                    Add-Member -Force -InputObject $db -MemberType NoteProperty BackupStatus -value $Notes
                    Add-Member -Force -InputObject $db -MemberType NoteProperty -Name ComputerName -value $server.ComputerName
                    Add-Member -Force -InputObject $db -MemberType NoteProperty -Name InstanceName -value $server.ServiceName
                    Add-Member -Force -InputObject $db -MemberType NoteProperty -Name SqlInstance -value $server.DomainInstanceName
                    Add-Member -Force -InputObject $db -MemberType NoteProperty -Name LastRead -value $lastusedinfo.last_read
                    Add-Member -Force -InputObject $db -MemberType NoteProperty -Name LastWrite -value $lastusedinfo.last_write
                    Select-DefaultView -InputObject $db -Property $defaults
                    #try { $server.Databases.Refresh() } catch {}
                }
            } catch {
                Stop-Function -ErrorRecord $_ -Target $instance -Message "Failure. Collection may have been modified. If so, please use parens (Get-DbaDatabase ....) | when working with commands that modify the collection such as Remove-DbaDatabase." -Continue
            }
        }
    }
}

tools\dbatools\functions\Find-DbaDisabledIndex.ps1

function Find-DbaDisabledIndex {
    <#
    .SYNOPSIS
        Find Disabled indexes

    .DESCRIPTION
        This command will help you to find disabled indexes on a database or a list of databases.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The database(s) to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        Specifies the database(s) to exclude from processing. Options for this list are auto-populated from the server.

    .PARAMETER NoClobber
        If this switch is enabled, the output file will not be overwritten.

    .PARAMETER Append
        If this switch is enabled, content will be appended to the output file.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Index
        Author: Jason Squires, sqlnotnull.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Find-DbadisabledIndex

    .EXAMPLE
        PS C:\> Find-DbaDisabledIndex -SqlInstance sql2005

        Generates the SQL statements to drop the selected disabled indexes on server "sql2005".

    .EXAMPLE
        PS C:\> Find-DbaDisabledIndex -SqlInstance sqlserver2016 -SqlCredential $cred

        Generates the SQL statements to drop the selected disabled indexes on server "sqlserver2016", using SQL Authentication to connect to the database.

    .EXAMPLE
        PS C:\> Find-DbaDisabledIndex -SqlInstance sqlserver2016 -Database db1, db2

        Generates the SQL Statement to drop selected indexes in databases db1 & db2 on server "sqlserver2016".

    .EXAMPLE
        PS C:\> Find-DbaDisabledIndex -SqlInstance sqlserver2016

        Generates the SQL statements to drop selected indexes on all user databases.

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]
        $SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [switch]$NoClobber,
        [switch]$Append,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        $sql = "
        SELECT DB_NAME() AS 'DatabaseName'
        ,s.name AS 'SchemaName'
        ,t.name AS 'TableName'
        ,i.object_id AS ObjectId
        ,i.name AS 'IndexName'
        ,i.index_id as 'IndexId'
        ,i.type_desc as 'TypeDesc'
        FROM sys.tables t
        JOIN sys.schemas s
            ON t.schema_id = s.schema_id
        JOIN sys.indexes i
            ON i.object_id = t.object_id
        WHERE i.is_disabled = 1"
    }
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential  -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            if ($Database) {
                $databases = $server.Databases | Where-Object Name -in $database
            } else {
                $databases = $server.Databases | Where-Object IsAccessible -eq $true
            }

            if ($databases.Count -gt 0) {
                foreach ($db in $databases.name) {

                    if ($ExcludeDatabase -contains $db -or $null -eq $server.Databases[$db]) {
                        continue
                    }

                    try {
                        if ($PSCmdlet.ShouldProcess($db, "Getting disabled indexes")) {
                            Write-Message -Level Verbose -Message "Getting indexes from database '$db'."
                            Write-Message -Level Debug -Message "SQL Statement: $sql"
                            $disabledIndex = $server.Databases[$db].ExecuteWithResults($sql)

                            if ($disabledIndex.Tables[0].Rows.Count -gt 0) {
                                $results = $disabledIndex.Tables[0];
                                if ($results.Count -gt 0 -or !([string]::IsNullOrEmpty($results))) {
                                    foreach ($index in $results) {
                                        $index
                                    }
                                }
                            } else {
                                Write-Message -Level Verbose -Message "No Disabled indexes found!"
                            }
                        }
                    } catch {
                        Stop-Function -Message "Issue gathering indexes" -Category InvalidOperation -InnerErrorRecord $_ -Target $db
                    }
                }
            } else {
                Write-Message -Level Verbose -Message "There are no databases to analyse."
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Get-SqlDisabledIndex
    }
}

tools\dbatools\functions\Get-DbaDbccHelp.ps1

function Get-DbaDbccHelp {
    <#
    .SYNOPSIS
        Execution of Database Console Command DBCC HELP

    .DESCRIPTION
        Returns the results of DBCC HELP

        Read more:
            - https://docs.microsoft.com/en-us/sql/t-sql/database-console-commands/dbcc-help-transact-sql

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Statement
        Is the name of the DBCC command for which to receive syntax information.
        Provide only the part of the DBCC command that follows DBCC,
            for example, CHECKDB instead of DBCC CHECKDB.

    .PARAMETER IncludeUndocumented
        Allows getting help for undocumented DBCC commands. Requires Traceflag 2588
        This only works for SQL Server 2005 or Higher

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: DBCC
        Author: Patrick Flynn (@sqllensman)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaDbccUserOptions

    .EXAMPLE
        PS C:\> Get-DbaDbccHelp -SqlInstance SQLInstance -Statement FREESYSTEMCACHE -Verbose | Format-List

        Runs the command DBCC HELP(FREESYSTEMCACHE) WITH NO_INFOMSGS against the SQL Server instance SQLInstance

    .EXAMPLE
        PS C:\> Get-DbaDbccHelp -SqlInstance LensmanSB -Statement WritePage -IncludeUndocumented | Format-List

        Sets TraeFlag 2588 on for session and then runs the command DBCC HELP(WritePage) WITH NO_INFOMSGS against the SQL Server instance SQLInstance

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string]$Statement,
        [switch]$IncludeUndocumented,
        [switch]$EnableException
    )
    begin {
        if (Test-Bound -Not -ParameterName Statement) {
            Stop-Function -Message "You must specify a value for Statement"
            return
        }
        $stringBuilder = New-Object System.Text.StringBuilder

        if (Test-Bound -ParameterName IncludeUndocumented) {
            $null = $stringBuilder.Append("DBCC TRACEON (2588) WITH NO_INFOMSGS;")
        }

        Write-Message -Message "Get Help Information for $Statement" -Level Verbose
        $null = $stringBuilder.Append("DBCC HELP($Statement) WITH NO_INFOMSGS;")
    }
    process {

        foreach ($instance in $SqlInstance) {
            Write-Message -Message "Attempting Connection to $instance" -Level Verbose
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            try {
                $query = $StringBuilder.ToString()
                Write-Message -Message "Query to run: $query" -Level Verbose
                $results = $server | Invoke-DbaQuery  -Query $query -MessagesToOutput

            } catch {
                Stop-Function -Message "Failure" -ErrorRecord $_ -Target $server -Continue
            }

            [PSCustomObject]@{
                Operation = $Statement
                Cmd       = "DBCC HELP($Statement)"
                Output    = $results
            }

        }
    }
}

tools\dbatools\functions\Get-DbaDbccMemoryStatus.ps1

function Get-DbaDbccMemoryStatus {
    <#
    .SYNOPSIS
        Gets the results of DBCC MEMORYSTATUS.  Works on SQL Server 2000-2019.

    .DESCRIPTION
        This command is used to run the DBCC MEMORYSTATUS comand and collect results in a single usable recordset

        Reference:
            - https://blogs.msdn.microsoft.com/timchapman/2012/08/16/how-to-parse-dbcc-memorystatus-via-powershell/
            - https://support.microsoft.com/en-us/help/907877/how-to-use-the-dbcc-memorystatus-command-to-monitor-memory-usage-on-sq

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: DBCC, Memory
        Author: Patrick Flynn (@sqllensman)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaMemoryStatus

    .EXAMPLE
        PS C:\> Get-DbaDbccMemoryStatus -SqlInstance sqlcluster, sqlserver2012

        Get output of DBCC MEMORYSTATUS for instances "sqlcluster" and "sqlserver2012". Returns results in a single recordset.

    .EXAMPLE
        PS C:\> Get-DbaCmsRegServer -SqlInstance sqlcluster | Get-DbaDbccMemoryStatus

        Get output of DBCC MEMORYSTATUS for all servers in Server Central Management Server

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [switch]$EnableException
    )
    begin {
        $query = 'DBCC MEMORYSTATUS'
    }
    process {
        foreach ($instance in $SqlInstance) {
            Write-Message -Message "Attempting Connection to $instance" -Level Verbose
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            Write-Message -Level Verbose -Message "Collecting $query data from server: $instance"
            try {
                $sqlconnection = New-Object System.Data.SqlClient.SqlConnection
                $sqlconnection.ConnectionString = $server.ConnectionContext.ConnectionString
                $sqlconnection.Open()

                $datatable = New-Object system.Data.DataSet
                $dataadapter = New-Object system.Data.SqlClient.SqlDataAdapter($query, $sqlconnection)
                $dataadapter.fill($datatable) | Out-Null

                $recordset = 0
                $rowId = 0
                $recordsetId = 0

                foreach ($dataset in $datatable.Tables) {
                    $dataSection = $dataset.Columns[0].ColumnName
                    $dataType = $dataset.Columns[1].ColumnName
                    $recordset = $recordset + 1
                    foreach ($row in $dataset.Rows) {
                        $rowId = $rowId + 1
                        $recordsetId = $recordsetId + 1
                        [PSCustomObject]@{
                            ComputerName = $server.ComputerName
                            InstanceName = $server.ServiceName
                            SqlInstance  = $server.DomainInstanceName
                            RecordSet    = $RecordSet
                            RowId        = $RowId
                            RecordSetId  = $RecordSetId
                            Type         = $dataSection
                            Name         = $Row[0]
                            Value        = $Row[1]
                            ValueType    = $dataType
                        }
                    }
                    $recordsetId = 0
                }
            } catch {
                Stop-Function -Message "Failure Executing $query" -ErrorRecord $_ -Target $instance -Continue
            }
        }
    }
}

tools\dbatools\functions\Find-DbaDbUnusedIndex.ps1

#ValidationTags#CodeStyle,Messaging,FlowControl,Pipeline#
function Find-DbaDbUnusedIndex {
    <#
    .SYNOPSIS
        Find unused indexes

    .DESCRIPTION
        This command will help you to find Unused indexes on a database or a list of databases

        For now only supported for CLUSTERED and NONCLUSTERED indexes

    .PARAMETER SqlInstance
        The SQL Server you want to check for unused indexes.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The database(s) to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        Specifies the database(s) to exclude from processing. Options for this list are auto-populated from the server.

    .PARAMETER IgnoreUptime
        Less than 7 days uptime can mean that analysis of unused indexes is unreliable, and normally no results will be returned. By setting this option results will be returned even if the Instance has been running for less that 7 days.

    .PARAMETER InputObject
        Enables piping from Get-DbaDatabase

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Index
        Author: Aaron Nelson (@SQLvariant), SQLvariant.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Find-DbaDbUnusedIndex

    .EXAMPLE
        PS C:\> Find-DbaDbUnusedIndex -SqlInstance sql2016 -Database db1, db2

        Finds unused databases on db1 and db2 on sql2016

    .EXAMPLE
        PS C:\> Find-DbaDbUnusedIndex -SqlInstance sql2016 -SqlCredential $cred

        Finds unused databases on db1 and db2 on sql2016 using SQL Authentication to connect to the server

    .EXAMPLE
        PS C:\> Get-DbaDatabase -SqlInstance sql2016 | Find-DbaDbUnusedIndex

        Finds unused databases on all databases on sql2016

       #>
    [CmdletBinding()]
    param (
        [parameter(ValueFromPipeline)]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [switch]$IgnoreUptime,
        [Parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Database[]]$InputObject,
        [switch]$EnableException
    )
    begin {
        # Support Compression 2008+
        $sql = "SELECT  SERVERPROPERTY('MachineName') AS ComputerName,
        ISNULL(SERVERPROPERTY('InstanceName'), 'MSSQLSERVER') AS InstanceName,
        SERVERPROPERTY('ServerName') AS SqlInstance, DB_NAME(database_id) AS 'Database'
        ,s.name AS 'Schema'
        ,t.name AS 'Table'
        ,i.object_id AS ObjectId
        ,i.name AS 'IndexName'
        ,i.index_id as 'IndexId'
        ,i.type_desc as 'TypeDesc'
        ,user_seeks as 'UserSeeks'
        ,user_scans as 'UserScans'
        ,user_lookups  as 'UserLookups'
        ,user_updates  as 'UserUpdates'
        ,last_user_seek  as 'LastUserSeek'
        ,last_user_scan  as 'LastUserScan'
        ,last_user_lookup  as 'LastUserLookup'
        ,last_user_update  as 'LastUserUpdate'
        ,system_seeks  as 'SystemSeeks'
        ,system_scans  as 'SystemScans'
        ,system_lookups  as 'SystemLookup'
        ,system_updates  as 'SystemUpdates'
        ,last_system_seek  as 'LastSystemSeek'
        ,last_system_scan  as 'LastSystemScan'
        ,last_system_lookup  as 'LastSystemLookup'
        ,last_system_update as 'LastSystemUpdate'
        FROM sys.tables t
        JOIN sys.schemas s
            ON t.schema_id = s.schema_id
        JOIN sys.indexes i
            ON i.object_id = t.object_id LEFT OUTER
        JOIN sys.dm_db_index_usage_stats iu
            ON iu.object_id = i.object_id
                AND iu.index_id = i.index_id
        WHERE iu.database_id = DB_ID()
                AND OBJECTPROPERTY(i.[object_id], 'IsMSShipped') = 0
                AND user_seeks = 0
                AND user_scans = 0
                AND user_lookups = 0
                AND i.type_desc NOT IN ('HEAP', 'CLUSTERED COLUMNSTORE')"
    }

    process {
        if ($SqlInstance) {
            $InputObject += Get-DbaDatabase -SqlInstance $SqlInstance -SqlCredential $SqlCredential -Database $Database -ExcludeDatabase $ExcludeDatabase
        }

        foreach ($db in $InputObject) {
            if ($db.Parent.Databases[$db].IsAccessible -eq $false) {
                Write-Message -Level Warning -Message "Database [$db] is not accessible."
                continue
            }

            $server = $db.Parent
            $instance = $server.Name

            if ($server.VersionMajor -lt 9) {
                Stop-Function -Message "This function does not support versions lower than SQL Server 2005 (v9)." -Continue
            }

            $lastRestart = $server.Databases['tempdb'].CreateDate
            $endDate = Get-Date -Date $lastRestart
            $diffDays = (New-TimeSpan -Start $endDate -End (Get-Date)).Days

            if ($diffDays -le 6) {
                if ($IgnoreUptime) {
                    Write-Message -Level Verbose -Message "The SQL Service was restarted on $lastRestart, which is not long enough for a solid evaluation."
                } else {
                    Stop-Function -Message "The SQL Service on $instance was restarted on $lastRestart, which is not long enough for a solid evaluation." -Continue
                }
            }

            <#
                Validate if server version is:
                    - sql 2012 and if have SP3 CU3 (Build 6537) or higher
                    - sql 2014 and if have SP2 (Build 5000) or higher
                If the major version is the same but the build is lower, throws the message
            #>

            if (($server.VersionMajor -eq 11 -and $server.BuildNumber -lt 6537) -or ($server.VersionMajor -eq 12 -and $server.BuildNumber -lt 5000)) {
                Stop-Function -Message "This SQL version has a known issue. Rebuilding an index clears any existing row entry from sys.dm_db_index_usage_stats for that index.`r`nPlease refer to connect item: https://support.microsoft.com/en-us/help/3160407/fix-sys-dm-db-index-usage-stats-missing-information-after-index-rebuil" -Continue
            }

            if ($diffDays -le 33) {
                Write-Message -Level Verbose -Message "The SQL Service on $instance was restarted on $lastRestart, which may not be long enough for a solid evaluation."
            }

            try {
                $db.Query($sql)
            } catch {
                Stop-Function -Message "Issue gathering indexes" -Category InvalidOperation -ErrorRecord $_ -Target $db
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias Get-SqlUnusedIndex
    }
}

tools\dbatools\functions\Find-DbaDbGrowthEvent.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Find-DbaDbGrowthEvent {
    <#
    .SYNOPSIS
        Finds any database AutoGrow events in the Default Trace.

    .DESCRIPTION
        Finds any database AutoGrow events in the Default Trace.

        The following events are included:
        92 - Data File Auto Grow
        93 - Log File Auto Grow
        94 - Data File Auto Shrink
        95 - Log File Auto Shrink

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto-populated from the server

    .PARAMETER EventType
        Provide a filter on growth event type to filter the results.

        Allowed values: Growth, Shrink

    .PARAMETER FileType
        Provide a filter on file type to filter the results.

        Allowed values: Data, Log

    .PARAMETER UseLocalTime
        Return the local time of the instance instead of converting to UTC.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: AutoGrow,Growth,Database
        Author: Aaron Nelson

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        Query Extracted from SQL Server Management Studio (SSMS) 2016.

    .LINK
        https://dbatools.io/Find-DbaDatabaseGrowthEvent

    .EXAMPLE
        PS C:\> Find-DbaDatabaseGrowthEvent -SqlInstance localhost

        Returns any database AutoGrow events in the Default Trace with UTC time for the instance for every database on the localhost instance.

    .EXAMPLE
        PS C:\> Find-DbaDatabaseGrowthEvent -SqlInstance localhost -UseLocalTime

        Returns any database AutoGrow events in the Default Trace with the local time of the instance for every database on the localhost instance.

    .EXAMPLE
        PS C:\> Find-DbaDatabaseGrowthEvent -SqlInstance ServerA\SQL2016, ServerA\SQL2014

        Returns any database AutoGrow events in the Default Traces for every database on ServerA\sql2016 & ServerA\SQL2014.

    .EXAMPLE
        PS C:\> Find-DbaDatabaseGrowthEvent -SqlInstance ServerA\SQL2016 | Format-Table -AutoSize -Wrap

        Returns any database AutoGrow events in the Default Trace for every database on the ServerA\SQL2016 instance in a table format.

    .EXAMPLE
        PS C:\> Find-DbaDatabaseGrowthEvent -SqlInstance ServerA\SQL2016 -EventType Shrink

        Returns any database Auto Shrink events in the Default Trace for every database on the ServerA\SQL2016 instance.

    .EXAMPLE
        PS C:\> Find-DbaDatabaseGrowthEvent -SqlInstance ServerA\SQL2016 -EventType Growth -FileType Data

        Returns any database Auto Growth events on data files in the Default Trace for every database on the ServerA\SQL2016 instance.

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstance[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [ValidateSet('Growth', 'Shrink')]
        [string]$EventType,
        [ValidateSet('Data', 'Log')]
        [string]$FileType,
        [switch]$UseLocalTime,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        $eventClass = New-Object System.Collections.ArrayList
        92..95 | ForEach-Object { $null = $eventClass.Add($_) }

        if (Test-Bound 'EventType', 'FileType') {
            switch ($FileType) {
                'Data' {
                    <# should only contain events for data: 92 (grow), 94 (shrink) #>
                    $eventClass.Remove(93)
                    $eventClass.Remove(95)
                }
                'Log' {
                    <# should only contain events for log: 93 (grow), 95 (shrink) #>
                    $eventClass.Remove(92)
                    $eventClass.Remove(94)
                }
            }
            switch ($EventType) {
                'Growth' {
                    <# should only contain events for growth: 92 (data), 93 (log) #>
                    $eventClass.Remove(94)
                    $eventClass.Remove(95)
                }
                'Shrink' {
                    <# should only contain events for shrink: 94 (data), 95 (log) #>
                    $eventClass.Remove(92)
                    $eventClass.Remove(93)
                }
            }
        }

        $eventClassFilter = $eventClass -join ","

        $sqlTemplate = "
            BEGIN TRY
                IF (SELECT CONVERT(INT,[value_in_use]) FROM sys.configurations WHERE [name] = 'default trace enabled' ) = 1
                    BEGIN
                        DECLARE @curr_tracefilename VARCHAR(500);
                        DECLARE @base_tracefilename VARCHAR(500);
                        DECLARE @indx INT;

                        SELECT @curr_tracefilename = [path]
                        FROM sys.traces
                        WHERE is_default = 1 ;

                        SET @curr_tracefilename = REVERSE(@curr_tracefilename);
                        SELECT @indx  = PATINDEX('%\%', @curr_tracefilename);
                        SET @curr_tracefilename = REVERSE(@curr_tracefilename);
                        SET @base_tracefilename = LEFT( @curr_tracefilename,LEN(@curr_tracefilename) - @indx) + '\log.trc';

                        SELECT
                            SERVERPROPERTY('MachineName') AS ComputerName,
                            ISNULL(SERVERPROPERTY('InstanceName'), 'MSSQLSERVER') AS InstanceName,
                            SERVERPROPERTY('ServerName') AS SqlInstance,
                            CONVERT(INT,(DENSE_RANK() OVER (ORDER BY [StartTime] DESC))%2) AS OrderRank,
                                CONVERT(INT, [EventClass]) AS EventClass,
                            [DatabaseName],
                            [Filename],
                            CONVERT(INT,(Duration/1000)) AS Duration,
                            $(if (-not $UseLocalTime) { "
                            DATEADD (MINUTE, DATEDIFF(MINUTE, GETDATE(), GETUTCDATE()), [StartTime]) AS StartTime,  -- Convert to UTC time
                            DATEADD (MINUTE, DATEDIFF(MINUTE, GETDATE(), GETUTCDATE()), [EndTime]) AS EndTime,  -- Convert to UTC time"
                            }
                            else { "
                            [StartTime] AS StartTime,
                            [EndTime] AS EndTime,"
                            })
                            ([IntegerData]*8.0/1024) AS ChangeInSize,
                            ApplicationName,
                            HostName,
                            SessionLoginName,
                            SPID
                        FROM::fn_trace_gettable( @base_tracefilename, DEFAULT )
                        WHERE
                            [EventClass] IN ($eventClassFilter)
                            AND [ServerName] = @@SERVERNAME
                            AND [DatabaseName] IN (_DatabaseList_)
                        ORDER BY [StartTime] DESC;
                    END
                ELSE
                    SELECT
                        SERVERPROPERTY('MachineName') AS ComputerName,
                        ISNULL(SERVERPROPERTY('InstanceName'), 'MSSQLSERVER') AS InstanceName,
                        SERVERPROPERTY('ServerName') AS SqlInstance,
                        -100 AS [OrderRank],
                        -1 AS [OrderRank],
                        0 AS [EventClass],
                        0 [DatabaseName],
                        0 AS [Filename],
                        0 AS [Duration],
                        0 AS [StartTime],
                        0 AS [EndTime],
                        0 AS ChangeInSize,
                        0 AS [ApplicationName],
                        0 AS [HostName],
                        0 AS [SessionLoginName],
                        0 AS [SPID]
            END	TRY
            BEGIN CATCH
                SELECT
                    SERVERPROPERTY('MachineName') AS ComputerName,
                    ISNULL(SERVERPROPERTY('InstanceName'), 'MSSQLSERVER') AS InstanceName,
                    SERVERPROPERTY('ServerName') AS SqlInstance,
                    -100 AS [OrderRank],
                    -100 AS [OrderRank],
                    ERROR_NUMBER() AS [EventClass],
                    ERROR_SEVERITY() AS [DatabaseName],
                    ERROR_STATE() AS [Filename],
                    ERROR_MESSAGE() AS [Duration],
                    1 AS [StartTime],
                    1 AS [EndTime],
                    1 AS [ChangeInSize],
                    1 AS [ApplicationName],
                    1 AS [HostName],
                    1 AS [SessionLoginName],
                    1 AS [SPID]
            END CATCH"

        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias Find-DbaDatabaseGrowthEvent
    }
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $dbs = $server.Databases

            if ($Database) {
                $dbs = $dbs | Where-Object Name -In $Database
            }

            if ($ExcludeDatabase) {
                $dbs = $dbs | Where-Object Name -NotIn $ExcludeDatabase
            }

            #Create dblist name in 'db1', 'db2' format
            $dbsList = "'$($($dbs | ForEach-Object {$_.Name}) -join "','")'"
            Write-Message -Level Verbose -Message "Executing query against $dbsList on $instance"

            $sql = $sqlTemplate -replace '_DatabaseList_', $dbsList
            Write-Message -Level Debug -Message "Executing SQL Statement:`n $sql"

            $defaults = 'ComputerName', 'InstanceName', 'SqlInstance', 'EventClass', 'DatabaseName', 'Filename', 'Duration', 'StartTime', 'EndTime', 'ChangeInSize', 'ApplicationName', 'HostName'

            try {
                Select-DefaultView -InputObject $server.Query($sql) -Property $defaults
            } catch {
                Stop-Function -Message "Issue collecting data on $server" -Target $server -ErrorRecord $_ -Exception $_.Exception.InnerException.InnerException.InnerException -Continue
            }
        }
    }
}

tools\dbatools\functions\Get-DbaDbCertificate.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaDbCertificate {
    <#
    .SYNOPSIS
        Gets database certificates

    .DESCRIPTION
        Gets database certificates

    .PARAMETER SqlInstance
        The target SQL Server instance

    .PARAMETER SqlCredential
        Allows you to login to SQL Server using alternative credentials

    .PARAMETER Database
        Get certificate from specific database

    .PARAMETER ExcludeDatabase
        Database(s) to ignore when retrieving certificates

    .PARAMETER InputObject
        Enables piping from Get-DbaDatabase

    .PARAMETER Certificate
        Get specific certificate by name

    .PARAMETER Certificate
        Get specific certificate by subject

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Certificate
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Get-DbaDbCertificate -SqlInstance sql2016

        Gets all certificates

    .EXAMPLE
        PS C:\> Get-DbaDbCertificate -SqlInstance Server1 -Database db1

        Gets the certificate for the db1 database

    .EXAMPLE
        PS C:\> Get-DbaDbCertificate -SqlInstance Server1 -Database db1 -Certificate cert1

        Gets the cert1 certificate within the db1 database

    .EXAMPLE
        PS C:\> Get-DbaDbCertificate -SqlInstance Server1 -Database db1 -Subject 'Availability Group Cert'

        Gets the cert1 certificate within the db1 database

    #>
    [CmdletBinding()]
    param (
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$Database,
        [string[]]$ExcludeDatabase,
        [object[]]$Certificate, # sometimes it's text, other times cert
        [string[]]$Subject,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Database[]]$InputObject,
        [switch]$EnableException
    )
    begin {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias Get-DbaDatabaseCertificate
    }
    process {
        if ($SqlInstance) {
            $InputObject += Get-DbaDatabase -SqlInstance $SqlInstance -SqlCredential $SqlCredential -Database $Database -ExcludeDatabase $ExcludeDatabase
        }

        foreach ($db in $InputObject) {
            if (!$db.IsAccessible) {
                Write-Message -Level Warning -Message "$db is not accessible, skipping"
                continue
            }

            #Variable marked as unused by PSScriptAnalyzer
            #$dbName = $db.Name
            $certs = $db.Certificates

            if ($null -eq $certs) {
                Write-Message -Message "No certificate exists in the $db database on $instance" -Target $db -Level Verbose
                continue
            }

            if ($Certificate) {
                $certs = $certs | Where-Object Name -in $Certificate
            }

            if ($Subject) {
                $certs = $certs | Where-Object Subject -in $Subject
            }

            foreach ($cert in $certs) {
                Add-Member -Force -InputObject $cert -MemberType NoteProperty -Name ComputerName -value $db.ComputerName
                Add-Member -Force -InputObject $cert -MemberType NoteProperty -Name InstanceName -value $db.InstanceName
                Add-Member -Force -InputObject $cert -MemberType NoteProperty -Name SqlInstance -value $db.SqlInstance
                Add-Member -Force -InputObject $cert -MemberType NoteProperty -Name Database -value $db.Name

                Select-DefaultView -InputObject $cert -Property ComputerName, InstanceName, SqlInstance, Database, Name, Subject, StartDate, ActiveForServiceBrokerDialog, ExpirationDate, Issuer, LastBackupDate, Owner, PrivateKeyEncryptionType, Serial
            }
        }
    }
}

tools\dbatools\functions\Get-DbaDbCheckConstraint.ps1

function Get-DbaDbCheckConstraint {
    <#
    .SYNOPSIS
        Gets database Check constraints.

    .DESCRIPTION
        Gets database Checks constraints.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances

    .PARAMETER SqlCredential
        Allows you to login to SQL Server using alternative credentials

    .PARAMETER Database
        To get Checks from specific database(s)

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto populated from the server

    .PARAMETER ExcludeSystemTable
        This switch removes all system objects from the table collection

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Database
        Author: Claudio Silva (@ClaudioESSilva), https://claudioessilva.eu

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Get-DbaDbCheckConstraint -SqlInstance sql2016

        Gets all database check constraints.

    .EXAMPLE
        PS C:\> Get-DbaDbCheckConstraint -SqlInstance Server1 -Database db1

        Gets the check constraints for the db1 database.

    .EXAMPLE
        PS C:\> Get-DbaDbCheckConstraint -SqlInstance Server1 -ExcludeDatabase db1

        Gets the check constraints for all databases except db1.

    .EXAMPLE
        PS C:\> Get-DbaDbCheckConstraint -SqlInstance Server1 -ExcludeSystemTable

        Gets the check constraints for all databases that are not system objects.

    .EXAMPLE
        PS C:\> 'Sql1','Sql2/sqlexpress' | Get-DbaDbCheckConstraint

        Gets the check constraints for the databases on Sql1 and Sql2/sqlexpress.

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [switch]$ExcludeSystemTable,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $databases = $server.Databases | Where-Object IsAccessible

            if ($Database) {
                $databases = $databases | Where-Object Name -In $Database
            }
            if ($ExcludeDatabase) {
                $databases = $databases | Where-Object Name -NotIn $ExcludeDatabase
            }

            foreach ($db in $databases) {
                if (!$db.IsAccessible) {
                    Write-Message -Level Warning -Message "Database $db is not accessible. Skipping."
                    continue
                }

                foreach ($tbl in $db.Tables) {
                    if ( (Test-Bound -ParameterName ExcludeSystemTable) -and $tbl.IsSystemObject ) {
                        continue
                    }

                    if ($tbl.Checks.Count -eq 0) {
                        Write-Message -Message "No Checks exist in $tbl table on the $db database on $instance" -Target $tbl -Level Verbose
                        continue
                    }

                    foreach ($ck in $tbl.Checks) {
                        Add-Member -Force -InputObject $ck -MemberType NoteProperty -Name ComputerName -value $server.ComputerName
                        Add-Member -Force -InputObject $ck -MemberType NoteProperty -Name InstanceName -value $server.ServiceName
                        Add-Member -Force -InputObject $ck -MemberType NoteProperty -Name SqlInstance -value $server.DomainInstanceName
                        Add-Member -Force -InputObject $ck -MemberType NoteProperty -Name Database -value $db.Name

                        $defaults = 'ComputerName', 'InstanceName', 'SqlInstance', 'Database', 'Parent', 'ID', 'CreateDate',
                        'DateLastModified', 'Name', 'IsEnabled', 'IsChecked', 'NotForReplication', 'Text', 'State'
                        Select-DefaultView -InputObject $ck -Property $defaults
                    }
                }
            }
        }
    }
}

tools\dbatools\functions\Get-DbaDbCompatibility.ps1

function Get-DbaDbCompatibility {
    <#
    .SYNOPSIS
        Displays the compatibility level for SQL Server databases.

    .DESCRIPTION
        Get the current database compatibility level for all databases on a server or list of databases passed in to the function.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        SqlCredential object used to connect to the SQL Server as a different user.

    .PARAMETER Database
        The database or databases to process. If unspecified, all databases will be processed.

    .PARAMETER InputObject
        A collection of databases (such as returned by Get-DbaDatabase)

    .PARAMETER WhatIf
        Shows what would happen if the command were to run

    .PARAMETER Confirm
        Prompts for confirmation of every step. For example:

        Are you sure you want to perform this action?
        Performing the operation "Update database" on target "pubs on SQL2016\VNEXT".
        [Y] Yes  [A] Yes to All  [N] No  [L] No to All  [S] Suspend  [?] Help (default is "Y"):

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Compatibility, Database
        Author: Garry Bargsley, http://blog.garrybargsley.com/

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaDbCompatibility

    .EXAMPLE
        PS C:\> Get-DbaDbCompatibility -SqlInstance localhost\sql2017

        Displays database compatibility level for all user databases on server localhost\sql2017

    .EXAMPLE
        PS C:\> Get-DbaDbCompatibility -SqlInstance localhost\sql2017 -Database Test

        Displays database compatibility level for database Test on server localhost\sql2017

    #>
    [CmdletBinding()]
    param (
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$Database,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Database[]]$InputObject,
        [switch]$EnableException
    )
    process {
        if (Test-Bound -not 'SqlInstance', 'InputObject') {
            Write-Message -Level Warning -Message "You must specify either a SQL instance or pipe a database collection"
            continue
        }

        if ($SqlInstance) {
            $InputObject += Get-DbaDatabase -SqlInstance $SqlInstance -SqlCredential $SqlCredential -Database $Database
        }

        foreach ($db in $InputObject) {
            $server = $db.Parent
            $ServerVersion = $server.VersionMajor
            Write-Message -Level Verbose -Message "SQL Server is using Version: $ServerVersion"

            [PSCustomObject]@{
                ComputerName  = $server.ComputerName
                InstanceName  = $server.ServiceName
                SqlInstance   = $server.DomainInstanceName
                Database      = $db.Name
                Compatibility = $db.CompatibilityLevel
            }
        }
    }
}

tools\dbatools\functions\Get-DbaDbCompression.ps1

function Get-DbaDbCompression {
    <#
    .SYNOPSIS
        Gets tables and indexes size and current compression settings.

    .DESCRIPTION
        This function gets the current size and compression for all objects in the specified database(s), if no database is specified it will return all objects in all user databases.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The database(s) to process - this list is auto populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto populated from the server.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Compression, Table, Database
        Author: Jess Pomfret (@jpomfret), jesspomfret.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Get-DbaDbCompression -SqlInstance localhost

        Returns objects size and current compression level for all user databases.

    .EXAMPLE
        PS C:\> Get-DbaDbCompression -SqlInstance localhost -Database TestDatabase

        Returns objects size and current compression level for objects within the TestDatabase database.

    .EXAMPLE
        PS C:\> Get-DbaDbCompression -SqlInstance localhost -ExcludeDatabase TestDatabases

        Returns objects size and current compression level for objects in all databases except the TestDatabase database.

    #>
    [CmdletBinding(DefaultParameterSetName = "Default")]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 10
            } catch {
                Stop-Function -Message "Failed to process Instance $Instance" -ErrorRecord $_ -Target $instance -Continue
            }

            try {
                $dbs = $server.Databases | Where-Object { $_.IsAccessible -and $_.IsSystemObject -eq 0 }

                if ($Database) {
                    $dbs = $dbs | Where-Object { $_.Name -In $Database }
                }

                if ($ExcludeDatabase) {
                    $dbs = $dbs | Where-Object { $_.Name -NotIn $ExcludeDatabase }
                }
            } catch {
                Stop-Function -Message "Unable to gather list of databases for $instance" -Target $instance -ErrorRecord $_ -Continue
            }

            foreach ($db in $dbs) {
                try {
                    foreach ($obj in $server.Databases[$($db.name)].Tables) {
                        if ($obj.HasHeapIndex) {
                            foreach ($p in $obj.PhysicalPartitions) {
                                [pscustomobject]@{
                                    ComputerName    = $server.ComputerName
                                    InstanceName    = $server.ServiceName
                                    SqlInstance     = $server.DomainInstanceName
                                    Database        = $db.Name
                                    Schema          = $obj.Schema
                                    TableName       = $obj.Name
                                    IndexName       = $null
                                    Partition       = $p.PartitionNumber
                                    IndexID         = 0
                                    IndexType       = "Heap"
                                    DataCompression = $p.DataCompression
                                    SizeCurrent     = [dbasize]($obj.DataSpaceUsed * 1024)
                                    RowCount        = $obj.RowCount
                                }
                            }
                        }

                        foreach ($index in $obj.Indexes) {
                            foreach ($p in $index.PhysicalPartitions) {
                                [pscustomobject]@{
                                    ComputerName    = $server.ComputerName
                                    InstanceName    = $server.ServiceName
                                    SqlInstance     = $server.DomainInstanceName
                                    Database        = $db.Name
                                    Schema          = $obj.Schema
                                    TableName       = $obj.Name
                                    IndexName       = $index.Name
                                    Partition       = $p.PartitionNumber
                                    IndexID         = $index.ID
                                    IndexType       = $index.IndexType
                                    DataCompression = $p.DataCompression
                                    SizeCurrent     = if ($index.IndexType -eq "ClusteredIndex") { [dbasize]($obj.DataSpaceUsed * 1024) } else { [dbasize]($index.SpaceUsed * 1024) }
                                    RowCount        = $p.RowCount
                                }
                            }
                        }

                    }
                } catch {
                    Stop-Function -Message "Unable to query $instance - $db" -Target $db -ErrorRecord $_ -Continue
                }

            }
        }
    }
}

tools\dbatools\functions\Find-DbaDatabase.ps1

#ValidationTags#Messaging#
function Find-DbaDatabase {
    <#
    .SYNOPSIS
        Find database/s on multiple servers that match criteria you input

    .DESCRIPTION
        Allows you to search SQL Server instances for database that have either the same name, owner or service broker guid.

        There a several reasons for the service broker guid not matching on a restored database primarily using alter database new broker. or turn off broker to return a guid of 0000-0000-0000-0000.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Credential object used to connect to the SQL Server as a different user

    .PARAMETER Property
        What you would like to search on. Either Database Name, Owner, or Service Broker GUID. Database name is the default.

    .PARAMETER Pattern
        Value that is searched for. This is a regular expression match but you can just use a plain ol string like 'dbareports'

    .PARAMETER Exact
        Search for an exact match instead of a pattern

    .PARAMETER Detailed
        Output all properties, will be depreciated in 1.0.0 release.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Database
        Author: Stephen Bennett, https://sqlnotesfromtheunderground.wordpress.com/

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Find-DbaDatabase

    .EXAMPLE
        PS C:\> Find-DbaDatabase -SqlInstance "DEV01", "DEV02", "UAT01", "UAT02", "PROD01", "PROD02" -Pattern Report

        Returns all database from the SqlInstances that have a database with Report in the name

    .EXAMPLE
        PS C:\> Find-DbaDatabase -SqlInstance "DEV01", "DEV02", "UAT01", "UAT02", "PROD01", "PROD02" -Pattern TestDB -Exact | Select-Object *

        Returns all database from the SqlInstances that have a database named TestDB with a detailed output.

    .EXAMPLE
        PS C:\> Find-DbaDatabase -SqlInstance "DEV01", "DEV02", "UAT01", "UAT02", "PROD01", "PROD02" -Property ServiceBrokerGuid -Pattern '-faeb-495a-9898-f25a782835f5' | Select-Object *

        Returns all database from the SqlInstances that have the same Service Broker GUID with a detailed output

    #>
    [CmdletBinding()]
    param (
        [Parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [ValidateSet('Name', 'ServiceBrokerGuid', 'Owner')]
        [string]$Property = 'Name',
        [parameter(Mandatory)]
        [string]$Pattern,
        [switch]$Exact,
        [switch]$Detailed,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {
        Test-DbaDeprecation -DeprecatedOn 1.0.0 -Parameter Detailed
    }
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            if ($exact -eq $true) {
                $dbs = $server.Databases | Where-Object IsAccessible | Where-Object { $_.$property -eq $pattern }
            } else {
                try {
                    $dbs = $server.Databases | Where-Object IsAccessible | Where-Object { $_.$property.ToString() -match $pattern }
                } catch {
                    # they probably put asterisks thinking it's a like
                    $Pattern = $Pattern -replace '\*', ''
                    $Pattern = $Pattern -replace '\%', ''
                    $dbs = $server.Databases | Where-Object { $_.$property.ToString() -match $pattern }
                }
            }

            foreach ($db in $dbs) {

                $extendedproperties = @()
                foreach ($xp in $db.ExtendedProperties) {
                    $extendedproperties += [PSCustomObject]@{
                        Name  = $db.ExtendedProperties[$xp.Name].Name
                        Value = $db.ExtendedProperties[$xp.Name].Value
                    }
                }

                if ($extendedproperties.count -eq 0) { $extendedproperties = 0 }

                [PSCustomObject]@{
                    ComputerName       = $server.ComputerName
                    InstanceName       = $server.ServiceName
                    SqlInstance        = $server.Name
                    Name               = $db.Name
                    Size               = [dbasize]($db.Size * 1024 * 1024)
                    Owner              = $db.Owner
                    CreateDate         = $db.CreateDate
                    ServiceBrokerGuid  = $db.ServiceBrokerGuid
                    Tables             = ($db.Tables | Where-Object { $_.IsSystemObject -eq $false }).Count
                    StoredProcedures   = ($db.StoredProcedures | Where-Object { $_.IsSystemObject -eq $false }).Count
                    Views              = ($db.Views | Where-Object { $_.IsSystemObject -eq $false }).Count
                    ExtendedProperties = $extendedproperties
                }
            }
        }
    }
}

tools\dbatools\functions\Find-DbaCommand.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Find-DbaCommand {
    <#
    .SYNOPSIS
        Finds dbatools commands searching through the inline help text

    .DESCRIPTION
        Finds dbatools commands searching through the inline help text, building a consolidated json index and querying it because Get-Help is too slow

    .PARAMETER Tag
        Finds all commands tagged with this auto-populated tag

    .PARAMETER Author
        Finds all commands tagged with this author

    .PARAMETER MinimumVersion
        Finds all commands tagged with this auto-populated minimum version

    .PARAMETER MaximumVersion
        Finds all commands tagged with this auto-populated maximum version

    .PARAMETER Rebuild
        Rebuilds the index

    .PARAMETER Pattern
        Searches help for all commands in dbatools for the specified pattern and displays all results

    .PARAMETER Confirm
        Confirms overwrite of index

    .PARAMETER WhatIf
        Displays what would happen if the command is run

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Find, Help, Command
        Author: Simone Bizzotto (@niphold)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Find-DbaCommand

    .EXAMPLE
        PS C:\> Find-DbaCommand "snapshot"

        For lazy typers: finds all commands searching the entire help for "snapshot"

    .EXAMPLE
        PS C:\> Find-DbaCommand -Pattern "snapshot"

        For rigorous typers: finds all commands searching the entire help for "snapshot"

    .EXAMPLE
        PS C:\> Find-DbaCommand -Tag copy

        Finds all commands tagged with "copy"

    .EXAMPLE
        PS C:\> Find-DbaCommand -Tag copy,user

        Finds all commands tagged with BOTH "copy" and "user"

    .EXAMPLE
        PS C:\> Find-DbaCommand -Author chrissy

        Finds every command whose author contains our beloved "chrissy"

    .EXAMPLE
        PS C:\> Find-DbaCommand -Author chrissy -Tag copy

        Finds every command whose author contains our beloved "chrissy" and it tagged as "copy"

    .EXAMPLE
        PS C:\> Find-DbaCommand -Pattern snapshot -Rebuild

        Finds all commands searching the entire help for "snapshot", rebuilding the index (good for developers)

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [String]$Pattern,
        [String[]]$Tag,
        [String]$Author,
        [String]$MinimumVersion,
        [String]$MaximumVersion,
        [switch]$Rebuild,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {
        function Get-DbaTrimmedString($Text) {
            return $Text.Trim() -replace '(\r\n){2,}', "`n"
        }

        $tagsRex = ([regex]'(?m)^[\s]{0,15}Tags:(.*)$')
        $authorRex = ([regex]'(?m)^[\s]{0,15}Author:(.*)$')
        $minverRex = ([regex]'(?m)^[\s]{0,15}MinimumVersion:(.*)$')
        $maxverRex = ([regex]'(?m)^[\s]{0,15}MaximumVersion:(.*)$')

        function Get-DbaHelp([String]$commandName) {
            $thishelp = Get-Help $commandName -Full
            $thebase = @{ }
            $thebase.CommandName = $commandName
            $thebase.Name = $thishelp.Name

            $alias = Get-Alias -Definition $commandName -ErrorAction SilentlyContinue
            $thebase.Alias = $alias.Name -Join ','

            ## fetch the description
            $thebase.Description = $thishelp.Description.Text

            ## fetch examples
            $thebase.Examples = Get-DbaTrimmedString -Text ($thishelp.Examples | Out-String -Width 200)

            ## fetch help link
            $thebase.Links = ($thishelp.relatedLinks).NavigationLink.Uri

            ## fetch the synopsis
            $thebase.Synopsis = $thishelp.Synopsis

            ## fetch the syntax
            $thebase.Syntax = Get-DbaTrimmedString -Text ($thishelp.Syntax | Out-String -Width 600)

            ## store notes
            $as = $thishelp.AlertSet | Out-String -Width 600

            ## fetch the tags
            $tags = $tagsrex.Match($as).Groups[1].Value
            if ($tags) {
                $thebase.Tags = $tags.Split(',').Trim()
            }
            ## fetch the author
            $author = $authorRex.Match($as).Groups[1].Value
            if ($author) {
                $thebase.Author = $author.Trim()
            }

            ## fetch MinimumVersion
            $MinimumVersion = $minverRex.Match($as).Groups[1].Value
            if ($MinimumVersion) {
                $thebase.MinimumVersion = $MinimumVersion.Trim()
            }

            ## fetch MaximumVersion
            $MaximumVersion = $maxverRex.Match($as).Groups[1].Value
            if ($MaximumVersion) {
                $thebase.MaximumVersion = $MaximumVersion.Trim()
            }

            ## fetch Parameters
            $parameters = $thishelp.parameters.parameter
            $command = Get-Command $commandName
            $params = @()
            foreach ($p in $parameters) {
                $paramAlias = $command.parameters[$p.Name].Aliases
                $paramDescr = Get-DbaTrimmedString -Text ($p.Description | Out-String -Width 200)
                $params += , @($p.Name, $paramDescr, ($paramAlias -Join ','), ($p.Required -eq $true), $p.PipelineInput, $p.DefaultValue)
            }

            $thebase.Params = $params

            [pscustomobject]$thebase
        }

        function Get-DbaIndex() {
            if ($Pscmdlet.ShouldProcess($dest, "Recreating index")) {
                $dbamodule = Get-Module -Name dbatools
                $allCommands = $dbamodule.ExportedCommands.Values | Where-Object CommandType -EQ 'Function'

                $helpcoll = New-Object System.Collections.Generic.List[System.Object]
                foreach ($command in $allCommands) {
                    $x = Get-DbaHelp "$command"
                    $helpcoll.Add($x)
                }
                # $dest = Get-DbatoolsConfigValue -Name 'Path.TagCache' -Fallback "$(Resolve-Path $PSScriptRoot\..)\dbatools-index.json"
                $dest = "$moduleDirectory\bin\dbatools-index.json"
                $helpcoll | ConvertTo-Json -Depth 4 | Out-File $dest -Encoding UTF8
            }
        }

        $moduleDirectory = (Get-Module -Name dbatools).ModuleBase
    }
    process {
        $Pattern = $Pattern.TrimEnd("s")
        $idxFile = "$moduleDirectory\bin\dbatools-index.json"
        if (!(Test-Path $idxFile) -or $Rebuild) {
            Write-Message -Level Verbose -Message "Rebuilding index into $idxFile"
            $swRebuild = [system.diagnostics.stopwatch]::StartNew()
            Get-DbaIndex
            Write-Message -Level Verbose -Message "Rebuild done in $($swRebuild.ElapsedMilliseconds)ms"
        }
        $consolidated = Get-Content -Raw $idxFile | ConvertFrom-Json
        $result = $consolidated
        if ($Pattern.Length -gt 0) {
            $result = $result | Where-Object { $_.PsObject.Properties.Value -like "*$Pattern*" }
        }

        if ($Tag.Length -gt 0) {
            foreach ($t in $Tag) {
                $result = $result | Where-Object Tags -Contains $t
            }
        }

        if ($Author.Length -gt 0) {
            $result = $result | Where-Object Author -Like "*$Author*"
        }

        if ($MinimumVersion.Length -gt 0) {
            $result = $result | Where-Object MinimumVersion -GE $MinimumVersion
        }

        if ($MaximumVersion.Length -gt 0) {
            $result = $result | Where-Object MaximumVersion -LE $MaximumVersion
        }

        Select-DefaultView -InputObject $result -Property CommandName, Synopsis
    }
}

tools\dbatools\functions\Find-DbaBackup.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Find-DbaBackup {
    <#
    .SYNOPSIS
        Finds SQL Server backups on disk.

    .DESCRIPTION
        Provides all of the same functionality for finding SQL backups to remove from disk as a standard maintenance plan would.

        As an addition you have the ability to check the Archive bit on files before deletion. This will allow you to ensure backups have been archived to your archive location before removal.

    .PARAMETER Path
        Specifies the name of the base level folder to search for backup files.

    .PARAMETER BackupFileExtension
        Specifies the filename extension of the backup files you wish to find (typically 'bak', 'trn' or 'log'). Do not include the period.

    .PARAMETER RetentionPeriod
        Specifies the retention period for backup files. Correct format is ##U.

        ## is the retention value and must be an integer value
        U signifies the units where the valid units are:
        h = hours
        d = days
        w = weeks
        m = months

        Formatting Examples:
        '48h' = 48 hours
        '7d' = 7 days
        '4w' = 4 weeks
        '1m' = 1 month

    .PARAMETER CheckArchiveBit
        If this switch is enabled, the filesystem Archive bit is checked.
        If this bit is set (which translates to "it has not been backed up to another location yet"), the file won't be included.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Backup
        Author: Chris Sommer (@cjsommer), www.cjsommer.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Find-DbaBackup

    .EXAMPLE
        PS C:\> Find-DbaBackup -Path 'C:\MSSQL\SQL Backup\' -BackupFileExtension trn -RetentionPeriod 48h

        Searches for all trn files in C:\MSSQL\SQL Backup\ and all subdirectories that are more than 48 hours old will be included.

    .EXAMPLE
        PS C:\> Find-DbaBackup -Path 'C:\MSSQL\Backup\' -BackupFileExtension bak -RetentionPeriod 7d -CheckArchiveBit

        Searches for all bak files in C:\MSSQL\Backup\ and all subdirectories that are more than 7 days old will be included, but only if the files have been backed up to another location as verified by checking the Archive bit.

#>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, HelpMessage = "Full path to the root level backup folder (ex. 'C:\SQL\Backups'")]
        [Alias("BackupFolder")]
        [string]$Path,
        [parameter(Mandatory, HelpMessage = "Backup File extension to remove (ex. bak, trn, dif)")]
        [string]$BackupFileExtension ,
        [parameter(Mandatory, HelpMessage = "Backup retention period. (ex. 24h, 7d, 4w, 6m)")]
        [string]$RetentionPeriod ,
        [switch]$CheckArchiveBit = $false ,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        ### Local Functions
        function Convert-UserFriendlyRetentionToDatetime {
            [cmdletbinding()]
            param (
                [string]$UserFriendlyRetention
            )

            <#
            Convert a user friendly retention value into a datetime.
            The last character of the string will indicate units (validated)
            Valid units are: (h = hours, d = days, w = weeks, m = months)

            The preceeding characters are the value and must be an integer (validated)

            Examples:
                '48h' = 48 hours
                '7d' = 7 days
                '4w' = 4 weeks
                '1m' = 1 month
            #>

            [int]$Length = ($UserFriendlyRetention).Length
            $Value = ($UserFriendlyRetention).Substring(0, $Length - 1)
            $Units = ($UserFriendlyRetention).Substring($Length - 1, 1)

            # Validate that $Units is an accepted unit of measure
            if ( $Units -notin @('h', 'd', 'w', 'm') ) {
                throw "RetentionPeriod '$UserFriendlyRetention' units invalid! See Get-Help for correct formatting and examples."
            }

            # Validate that $Value is an INT
            if ( ![int]::TryParse($Value, [ref]"") ) {
                throw "RetentionPeriod '$UserFriendlyRetention' format invalid! See Get-Help for correct formatting and examples."
            }

            switch ($Units) {
                #Variable marked as unused by PSScriptAnalyzer
                'h' {<# $UnitString = 'Hours';#> [datetime]$ReturnDatetime = (Get-Date).AddHours( - $Value)  }
                'd' {<# $UnitString = 'Days';#> [datetime]$ReturnDatetime = (Get-Date).AddDays( - $Value)   }
                'w' {<# $UnitString = 'Weeks';#> [datetime]$ReturnDatetime = (Get-Date).AddDays( - $Value * 7) }
                'm' {<# $UnitString = 'Months';#> [datetime]$ReturnDatetime = (Get-Date).AddMonths( - $Value) }
            }
            $ReturnDatetime
        }

        # Validations
        # Ensure BackupFileExtension does not begin with a .
        if ($BackupFileExtension -match "^[.]") {
            Write-Message -Level Warning -Message "Parameter -BackupFileExtension begins with a period '$BackupFileExtension'. A period is automatically prepended to -BackupFileExtension and need not be passed in."
        }
        # Ensure Path is a proper path
        if (!(Test-Path $Path -PathType 'Container')) {
            Stop-Function -Message "$Path not found"
        }

    }
    process {
        if (Test-FunctionInterrupt) { return }
        # Process stuff
        Write-Message -Message "Finding backups on $Path" -Level Verbose
        # Convert Retention Value to an actual DateTime
        try {
            $RetentionDate = Convert-UserFriendlyRetentionToDatetime -UserFriendlyRetention $RetentionPeriod
            Write-Message -Message "Backup Retention Date set to $RetentionDate" -Level Verbose
        } catch {
            Stop-Function -Message "Failed to interpret retention time!" -ErrorRecord $_
        }

        # Filter out unarchived files if -CheckArchiveBit parameter is used
        if ($CheckArchiveBit) {
            Write-Message -Message "Removing only archived files." -Level Verbose
            filter DbaArchiveBitFilter {
                if ($_.Attributes -notmatch "Archive") {
                    $_
                }
            }
        } else {
            filter DbaArchiveBitFilter {
                $_
            }
        }
        # Enumeration may take a while. Without resorting to "esoteric" file listing facilities
        # and given we need to fetch at least the LastWriteTime, let's just use "streaming" processing
        # here to avoid issues like described in #970
        Get-ChildItem $Path -Filter "*.$BackupFileExtension" -File -Recurse -ErrorAction SilentlyContinue -ErrorVariable EnumErrors |
            Where-Object LastWriteTime -lt $RetentionDate | DbaArchiveBitFilter
        if ($EnumErrors) {
            Write-Message "Errors encountered enumerating files." -Level Warning -ErrorRecord $EnumErrors
        }
    }
}

tools\dbatools\functions\Get-DbaDbFile.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaDbFile {
    <#
    .SYNOPSIS
        Returns detailed information about database files.

    .DESCRIPTION
        Returns detailed information about database files. Does not use SMO - SMO causes enumeration and this command avoids that.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances

    .PARAMETER SqlCredential
        Credentials to connect to the SQL Server instance if the calling user doesn't have permission

    .PARAMETER Database
        The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto-populated from the server

    .PARAMETER InputObject
        A piped collection of database objects

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Database
        Author: Stuart Moore (@napalmgram), stuart-moore.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Get-DbaDbFile -SqlInstance sql2016

        Will return an object containing all file groups and their contained files for every database on the sql2016 SQL Server instance

    .EXAMPLE
        PS C:\> Get-DbaDbFile -SqlInstance sql2016 -Database Impromptu

        Will return an object containing all file groups and their contained files for the Impromptu Database on the sql2016 SQL Server instance

    .EXAMPLE
        PS C:\> Get-DbaDbFile -SqlInstance sql2016 -Database Impromptu, Trading

        Will return an object containing all file groups and their contained files for the Impromptu and Trading databases on the sql2016 SQL Server instance

    #>
    [CmdletBinding(DefaultParameterSetName = "Default")]
    param (
        [parameter(ParameterSetName = "Pipe", Mandatory, ValueFromPipeline)]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [object[]]$InputObject,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {

        foreach ($instance in $sqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $sql = "select
            fg.name as FileGroupName,
            df.file_id as 'ID',
            df.Type,
            df.type_desc as TypeDescription,
            df.name as LogicalName,
            mf.physical_name as PhysicalName,
            df.state_desc as State,
            df.max_size as MaxSize,
            case mf.is_percent_growth when 1 then df.growth else df.Growth*8 end as Growth,
            fileproperty(df.name, 'spaceused') as UsedSpace,
            df.size as Size,
            vfs.size_on_disk_bytes as size_on_disk_bytes,
            case df.state_desc when 'OFFLINE' then 'True' else 'False' End as IsOffline,
            case mf.is_read_only when 1 then 'True' when 0 then 'False' End as IsReadOnly,
            case mf.is_media_read_only when 1 then 'True' when 0 then 'False' End as IsReadOnlyMedia,
            case mf.is_sparse when 1 then 'True' when 0 then 'False' End as IsSparse,
            case mf.is_percent_growth when 1 then 'Percent' when 0 then 'kb' End as GrowthType,
            case mf.is_read_only when 1 then 'True' when 0 then 'False' End as IsReadOnly,
            vfs.num_of_writes as NumberOfDiskWrites,
            vfs.num_of_reads as NumberOfDiskReads,
            vfs.num_of_bytes_read as BytesReadFromDisk,
            vfs.num_of_bytes_written as BytesWrittenToDisk,
            fg.data_space_id as FileGroupDataSpaceId,
            fg.Type as FileGroupType,
            fg.type_desc as FileGroupTypeDescription,
            case fg.is_default When 1 then 'True' when 0 then 'False' end as FileGroupDefault,
            fg.is_read_only as FileGroupReadOnly"

            $sqlfrom = "from sys.database_files df
            left outer join  sys.filegroups fg on df.data_space_id=fg.data_space_id
            inner join sys.dm_io_virtual_file_stats(db_id(),NULL) vfs on df.file_id=vfs.file_id
            inner join sys.master_files mf on df.file_id = mf.file_id
            and mf.database_id = db_id()"

            $sql2008 = ",vs.available_bytes as 'VolumeFreeSpace'"
            $sql2008from = "cross apply sys.dm_os_volume_stats(db_id(),df.file_id) vs"

            $sql2000 = "select
            fg.groupname as FileGroupName,
            df.fileid as ID,
            CONVERT(INT,df.status & 0x40) / 64 as Type,
            case CONVERT(INT,df.status & 0x40) / 64 when 1 then 'LOG' else 'ROWS' end as TypeDescription,
            df.name as LogicalName,
            df.filename as PhysicalName,
            'Existing' as State,
            df.maxsize as MaxSize,
            case CONVERT(INT,df.status & 0x100000) / 1048576 when 1 then df.growth when 0 then df.growth*8 End as Growth,
            fileproperty(df.name, 'spaceused') as UsedSpace,
            df.size as Size,
            case CONVERT(INT,df.status & 0x20000000) / 536870912 when 1 then 'True' else 'False' End as IsOffline,
            case CONVERT(INT,df.status & 0x10) / 16 when 1 then 'True' when 0 then 'False' End as IsReadOnly,
            case CONVERT(INT,df.status & 0x1000) / 4096 when 1 then 'True' when 0 then 'False' End as IsReadOnlyMedia,
            case CONVERT(INT,df.status & 0x10000000) / 268435456 when 1 then 'True' when 0 then 'False' End as IsSparse,
            case CONVERT(INT,df.status & 0x100000) / 1048576 when 1 then 'Percent' when 0 then 'kb' End as GrowthType,
            case CONVERT(INT,df.status & 0x1000) / 4096 when 1 then 'True' when 0 then 'False' End as IsReadOnly,
            fg.groupid as FileGroupDataSpaceId,
            NULL as FileGroupType,
            NULL AS FileGroupTypeDescription,
            CAST(fg.status & 0x10 as BIT) as FileGroupDefault,
            CAST(fg.status & 0x8 as BIT) as FileGroupReadOnly
            from sysfiles df
            left outer join  sysfilegroups fg on df.groupid=fg.groupid"

            if ($Database) {
                $InputObject = $server.Databases | Where-Object Name -in $database
            } else {
                $InputObject = $server.Databases
            }

            if ($ExcludeDatabase) {
                $InputObject = $InputObject | Where-Object Name -NotIn $ExcludeDatabase
            }

            foreach ($db in $InputObject) {

                Write-Message -Level Verbose -Message "Querying database $db"

                try {
                    $version = $server.Query("SELECT compatibility_level FROM sys.databases WHERE name = '$($db.Name)'")
                    $version = [int]($version.compatibility_level / 10)
                } catch {
                    $version = 8
                }

                if ($version -ge 11) {
                    $query = ($sql, $sql2008, $sqlfrom, $sql2008from) -Join "`n"
                } elseif ($version -ge 9) {
                    $query = ($sql, $sqlfrom) -Join "`n"
                } else {
                    $query = $sql2000
                }

                Write-Message -Level Debug -Message "SQL Statement: $query"

                try {
                    $results = $server.Query($query, $db.Name)
                } catch {
                    Stop-Function -Message "Failure" -ErrorRecord $_ -Continue
                }

                foreach ($result in $results) {
                    $size = [dbasize]($result.Size * 8192)
                    $usedspace = [dbasize]($result.UsedSpace * 8192)
                    $maxsize = $result.MaxSize
                    # calculation is done here because for snapshots or sparse files size is not the "virtual" size
                    # (master_files.Size) but the currently allocated one (dm_io_virtual_file_stats.size_on_disk_bytes)
                    $AvailableSpace = $size - $usedspace
                    if ($result.size_on_disk_bytes) {
                        $size = [dbasize]($result.size_on_disk_bytes)
                    }
                    if ($maxsize -gt -1) {
                        $maxsize = [dbasize]($result.MaxSize * 8192)
                    } else {
                        $maxsize = [dbasize]($result.MaxSize)
                    }

                    if ($result.VolumeFreeSpace) {
                        $VolumeFreeSpace = [dbasize]$result.VolumeFreeSpace
                    } else {
                        # to get drive free space for each drive that a database has files on
                        # when database compatibility lower than 110. Lets do this with query2
                        $query2 = @'
-- to get drive free space for each drive that a database has files on
DECLARE @FixedDrives TABLE(Drive CHAR(1), MB_Free BIGINT);
INSERT @FixedDrives EXEC sys.xp_fixeddrives;

SELECT DISTINCT fd.MB_Free, LEFT(df.physical_name, 1) AS [Drive]
FROM @FixedDrives AS fd
INNER JOIN sys.database_files AS df
ON fd.Drive = LEFT(df.physical_name, 1);
'@
                        # if the server has one drive xp_fixeddrives returns one row, but we still need $disks to be an array.
                        if ($server.VersionMajor -gt 8) {
                            $disks = @($server.Query($query2, $db.Name))
                            $MbFreeColName = $disks[0].psobject.Properties.Name
                            # get the free MB value for the drive in question
                            $free = $disks | Where-Object {
                                $_.drive -eq $result.PhysicalName.Substring(0, 1)
                            } | Select-Object $MbFreeColName

                            $VolumeFreeSpace = [dbasize](($free.MB_Free) * 1024 * 1024)
                        }
                    }
                    if ($result.GrowthType -eq "Percent") {
                        $nextgrowtheventadd = [dbasize]($result.size * ($result.Growth * 0.01) * 1024)
                    } else {
                        $nextgrowtheventadd = [dbasize]($result.Growth * 8 * 1024)
                    }
                    if ( ($nextgrowtheventadd.Byte -gt ($MaxSize.Byte - $size.Byte)) -and $maxsize -gt 0 ) { [dbasize]$nextgrowtheventadd = 0 }

                    [PSCustomObject]@{
                        ComputerName             = $server.ComputerName
                        InstanceName             = $server.ServiceName
                        SqlInstance              = $server.DomainInstanceName
                        Database                 = $db.name
                        FileGroupName            = $result.FileGroupName
                        ID                       = $result.ID
                        Type                     = $result.Type
                        TypeDescription          = $result.TypeDescription
                        LogicalName              = $result.LogicalName.Trim()
                        PhysicalName             = $result.PhysicalName.Trim()
                        State                    = $result.State
                        MaxSize                  = $maxsize
                        Growth                   = $result.Growth
                        GrowthType               = $result.GrowthType
                        NextGrowthEventSize      = $nextgrowtheventadd
                        Size                     = $size
                        UsedSpace                = $usedspace
                        AvailableSpace           = $AvailableSpace
                        IsOffline                = $result.IsOffline
                        IsReadOnly               = $result.IsReadOnly
                        IsReadOnlyMedia          = $result.IsReadOnlyMedia
                        IsSparse                 = $result.IsSparse
                        NumberOfDiskWrites       = $result.NumberOfDiskWrites
                        NumberOfDiskReads        = $result.NumberOfDiskReads
                        ReadFromDisk             = [dbasize]$result.BytesReadFromDisk
                        WrittenToDisk            = [dbasize]$result.BytesWrittenToDisk
                        VolumeFreeSpace          = $VolumeFreeSpace
                        FileGroupDataSpaceId     = $result.FileGroupDataSpaceId
                        FileGroupType            = $result.FileGroupType
                        FileGroupTypeDescription = $result.FileGroupTypeDescription
                        FileGroupDefault         = $result.FileGroupDefault
                        FileGroupReadOnly        = $result.FileGroupReadOnly
                    }
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Get-DbaDatabaseFIle
    }
}

tools\dbatools\functions\Find-DbaAgentJob.ps1

function Find-DbaAgentJob {
    <#
    .SYNOPSIS
        Find-DbaAgentJob finds agent jobs that fit certain search filters.

    .DESCRIPTION
        This command filters SQL Agent jobs giving the DBA a list of jobs that may need attention or could possibly be options for removal.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2000 or higher.

    .PARAMETER SqlCredential
        Allows you to login to servers using SQL Logins as opposed to Windows Auth/Integrated/Trusted.

    .PARAMETER JobName
        Filter agent jobs to only the name(s) you list.
        Supports regular expression (e.g. MyJob*) being passed in.

    .PARAMETER ExcludeJobName
        Allows you to enter an array of agent job names to ignore

    .PARAMETER StepName
        Filter based on StepName.
        Supports regular expression (e.g. MyJob*) being passed in.

    .PARAMETER LastUsed
        Find all jobs that havent ran in the INT number of previous day(s)

    .PARAMETER IsDisabled
        Find all jobs that are disabled

    .PARAMETER IsFailed
        Find all jobs that have failed

    .PARAMETER IsNotScheduled
        Find all jobs with no schedule assigned

    .PARAMETER IsNoEmailNotification
        Find all jobs without email notification configured

    .PARAMETER Category
        Filter based on agent job categories

    .PARAMETER Owner
        Filter based on owner of the job/s

    .PARAMETER Since
        Datetime object used to narrow the results to a date

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Agent, Job
        Author: Stephen Bennett (https://sqlnotesfromtheunderground.wordpress.com/)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Find-DbaAgentJob

    .EXAMPLE
        PS C:\> Find-DbaAgentJob -SqlInstance Dev01 -JobName *backup*

        Returns all agent job(s) that have backup in the name

    .EXAMPLE
        PS C:\> Find-DbaAgentJob -SqlInstance Dev01, Dev02 -JobName Mybackup

        Returns all agent job(s) that are named exactly Mybackup

    .EXAMPLE
        PS C:\> Find-DbaAgentJob -SqlInstance Dev01 -LastUsed 10

        Returns all agent job(s) that have not ran in 10 days

    .EXAMPLE
        PS C:\> Find-DbaAgentJob -SqlInstance Dev01 -IsDisabled -IsNoEmailNotification -IsNotScheduled

        Returns all agent job(s) that are either disabled, have no email notification or don't have a schedule. returned with detail

    .EXAMPLE
        PS C:\> $servers | Find-DbaAgentJob -IsFailed | Start-DbaAgentJob

        Finds all failed job then starts them. Consider using a -WhatIf at the end of Start-DbaAgentJob to see what it'll do first

    .EXAMPLE
        PS C:\> Find-DbaAgentJob -SqlInstance Dev01 -LastUsed 10 -Exclude "Yearly - RollUp Workload", "SMS - Notification"

        Returns all agent jobs that have not ran in the last 10 days ignoring jobs "Yearly - RollUp Workload" and "SMS - Notification"

    .EXAMPLE
        PS C:\> Find-DbaAgentJob -SqlInstance Dev01 -Category "REPL-Distribution", "REPL-Snapshot" | Format-Table -AutoSize -Wrap

        Returns all job/s on Dev01 that are in either category "REPL-Distribution" or "REPL-Snapshot"

    .EXAMPLE
        PS C:\> Find-DbaAgentJob -SqlInstance Dev01, Dev02 -IsFailed -Since '2016-07-01 10:47:00'

        Returns all agent job(s) on Dev01 and Dev02 that have failed since July of 2016 (and still have history in msdb)

    .EXAMPLE
        PS C:\> Get-DbaCmsRegServer -SqlInstance CMSServer -Group Production | Find-DbaAgentJob -Disabled -IsNotScheduled | Format-Table -AutoSize -Wrap

        Queries CMS server to return all SQL instances in the Production folder and then list out all agent jobs that have either been disabled or have no schedule.

    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "SqlServers")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]
        $SqlCredential,
        [Alias("Name")]
        [string[]]$JobName,
        [string[]]$ExcludeJobName,
        [string[]]$StepName,
        [int]$LastUsed,
        [Alias("Disabled")]
        [switch]$IsDisabled,
        [Alias("Failed")]
        [switch]$IsFailed,
        [Alias("NoSchedule")]
        [switch]$IsNotScheduled,
        [Alias("NoEmailNotification")]
        [switch]$IsNoEmailNotification,
        [string[]]$Category,
        [string]$Owner,
        [datetime]$Since,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {
        if ($IsFailed, [boolean]$JobName, [boolean]$StepName, [boolean]$LastUsed.ToString(), $IsDisabled, $IsNotScheduled, $IsNoEmailNotification, [boolean]$Category, [boolean]$Owner, [boolean]$ExcludeJobName -notcontains $true) {
            Stop-Function -Message "At least one search term must be specified"
        }
    }
    process {
        if (Test-FunctionInterrupt) { return }

        foreach ($instance in $SqlInstance) {
            Write-Message -Level Verbose -Message "Running Scan on: $instance"

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $jobs = $server.JobServer.jobs
            $output = @()

            if ($IsFailed) {
                Write-Message -Level Verbose -Message "Checking for failed jobs."
                $output += $jobs | Where-Object LastRunOutcome -eq "Failed"
            }

            if ($JobName) {
                Write-Message -Level Verbose -Message "Retrieving jobs by their name."
                $output += Get-JobList -SqlInstance $server -JobFilter $JobName
            }

            if ($StepName) {
                Write-Message -Level Verbose -Message "Retrieving jobs by their step names."
                $output += Get-JobList -SqlInstance $server -StepFilter $StepName
            }

            if ($LastUsed) {
                $DaysBack = $LastUsed * -1
                $SinceDate = (Get-date).AddDays($DaysBack)
                Write-Message -Level Verbose -Message "Finding job/s not ran in last $LastUsed days"
                $output += $jobs | Where-Object { $_.LastRunDate -le $SinceDate }
            }

            if ($IsDisabled) {
                Write-Message -Level Verbose -Message "Finding job/s that are disabled"
                $output += $jobs | Where-Object IsEnabled -eq $false
            }

            if ($IsNotScheduled) {
                Write-Message -Level Verbose -Message "Finding job/s that have no schedule defined"
                $output += $jobs | Where-Object HasSchedule -eq $false
            }
            if ($IsNoEmailNotification) {
                Write-Message -Level Verbose -Message "Finding job/s that have no email operator defined"
                $output += $jobs | Where-Object { [string]::IsNullOrEmpty($_.OperatorToEmail) -eq $true }
            }

            if ($Category) {
                Write-Message -Level Verbose -Message "Finding job/s that have the specified category defined"
                $output += $jobs | Where-Object { $Category -contains $_.Category }
            }

            if ($Owner) {
                Write-Message -Level Verbose -Message "Finding job/s with owner critera"
                if ($Owner -match "-") {
                    $OwnerMatch = $Owner -replace "-", ""
                    Write-Message -Level Verbose -Message "Checking for jobs that NOT owned by: $OwnerMatch"
                    $output += $server.JobServer.jobs | Where-Object { $OwnerMatch -notcontains $_.OwnerLoginName }
                } else {
                    Write-Message -Level Verbose -Message "Checking for jobs that are owned by: $owner"
                    $output += $server.JobServer.jobs | Where-Object { $Owner -contains $_.OwnerLoginName }
                }
            }

            if ($Exclude) {
                Write-Message -Level Verbose -Message "Excluding job/s based on Exclude"
                $output = $output | Where-Object { $Exclude -notcontains $_.Name }
            }

            if ($Since) {
                #$Since = $Since.ToString("yyyy-MM-dd HH:mm:ss")
                Write-Message -Level Verbose -Message "Getting only jobs whose LastRunDate is greater than or equal to $since"
                $output = $output | Where-Object { $_.LastRunDate -ge $since }
            }

            $jobs = $output | Select-Object -Unique

            foreach ($job in $jobs) {
                Add-Member -Force -InputObject $job -MemberType NoteProperty -Name ComputerName -value $server.ComputerName
                Add-Member -Force -InputObject $job -MemberType NoteProperty -Name InstanceName -value $server.ServiceName
                Add-Member -Force -InputObject $job -MemberType NoteProperty -Name SqlInstance -value $server.DomainInstanceName
                Add-Member -Force -InputObject $job -MemberType NoteProperty -Name JobName -value $job.Name


                Select-DefaultView -InputObject $job -Property ComputerName, InstanceName, SqlInstance, Name, Category, OwnerLoginName, CurrentRunStatus, CurrentRunRetryAttempt, 'IsEnabled as Enabled', LastRunDate, LastRunOutcome, DateCreated, HasSchedule, OperatorToEmail, 'DateCreated as CreateDate'
            }
        }
    }
}

tools\dbatools\functions\Get-DbaDbLogShipError.ps1

function Get-DbaDbLogShipError {
    <#
    .SYNOPSIS
        Get-DbaDbLogShipError returns all the log shipping errors that occurred

    .DESCRIPTION
        When your log shipping fails it's sometimes hard to see why is fails.
        Using this function you'll be able to find out what went wrong in a short amount of time.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2000 or greater.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        Allows you to filter the results to only return the databases you're interested in. This can be one or more values separated by commas.
        This is not a wildcard and should be the exact database name. See examples for more info.

    .PARAMETER ExcludeDatabase
        Allows you to filter the results to only return the databases you're not interested in. This can be one or more values separated by commas.
        This is not a wildcard and should be the exact database name.

    .PARAMETER Action
        Filter to get the log shipping action that has occurred like Backup, Copy, Restore.
        By default all the actions are returned.

    .PARAMETER DateTimeFrom
        Filter the results based on the date starting from datetime X

    .PARAMETER DateTimeTo
        Filter the results based on the date ending with datetime X

    .PARAMETER Primary
        Allows to filter the results to only return values that apply to the primary instance.

    .PARAMETER Secondary
        Allows to filter the results to only return values that apply to the secondary instance.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: LogShipping
        Author: Sander Stad (@sqlstad), sqlstad.nl

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaDbLogShipError

    .EXAMPLE
        PS C:\> Get-DbaDbLogShipError -SqlInstance sql1

        Get all the log shipping errors that occurred

    .EXAMPLE
        PS C:\> Get-DbaDbLogShipError -SqlInstance sql1 -Action Backup

        Get the errors that have something to do with the backup of the databases

    .EXAMPLE
        PS C:\> Get-DbaDbLogShipError -SqlInstance sql1 -Secondary

        Get the errors that occurred on the secondary instance.
        This will return the copy of the restore actions because those only occur on the secondary instance

    .EXAMPLE
        PS C:\> Get-DbaDbLogShipError -SqlInstance sql1 -DateTimeFrom "01/05/2018"

        Get the errors that have occurred from "01/05/2018". This can also be of format "yyyy-MM-dd"

    .EXAMPLE
        PS C:\> Get-DbaDbLogShipError -SqlInstance sql1 -Secondary -DateTimeFrom "01/05/2018" -DateTimeTo "2018-01-07"

        Get the errors that have occurred between "01/05/2018" and "01/07/2018".
        See that is doesn't matter how the date is represented.

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$Database,
        [string[]]$ExcludeDatabase,
        [ValidateSet("Backup", "Copy", "Restore")]
        [string[]]$Action,
        [datetime]$DateTimeFrom,
        [datetime]$DateTimeTo,
        [switch]$Primary,
        [switch]$Secondary,
        [Alias('Silent')]
        [switch]$EnableException
    )
    process {
        foreach ($instance in $sqlinstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            if ($server.EngineEdition -match "Express") {
                Write-Message -Level Warning -Message "$instance is Express Edition which does not support Log Shipping"
                continue
            }

            $query = "
CREATE TABLE #DatabaseID
(
    DatabaseName VARCHAR(128),
    DatabaseID UNIQUEIDENTIFIER,
    Instance VARCHAR(20)
);

INSERT INTO #DatabaseID
(
    DatabaseName,
    DatabaseID,
    Instance
)
SELECT secondary_database,
        secondary_id,
        'Secondary'
FROM msdb.dbo.log_shipping_secondary_databases;


INSERT INTO #DatabaseID
(
    DatabaseName,
    DatabaseID,
    Instance
)
SELECT primary_database,
        primary_id,
        'Primary'
FROM msdb.dbo.log_shipping_primary_databases;


SELECT di.DatabaseName,
        di.Instance,
        CASE lsmed.[agent_type]
            WHEN 0 THEN
                'Backup'
            WHEN 1 THEN
                'Copy'
            WHEN 2 THEN
                'Restore'
            ELSE
                ''
        END AS [Action],
        lsmed.[session_id] AS SessionID,
        lsmed.[sequence_number] AS SequenceNumber,
        lsmed.[log_time] AS LogTime,
        lsmed.[message] AS [Message]
FROM msdb.dbo.log_shipping_monitor_error_detail AS lsmed
    INNER JOIN #DatabaseID AS di
        ON di.DatabaseID = lsmed.agent_id
ORDER BY lsmed.[log_time],
            lsmed.[database_name],
            lsmed.[agent_type],
            lsmed.[session_id],
            lsmed.[sequence_number];

DROP TABLE #DatabaseID;"

            # Get the log shipping errors
            $results = $server.Query($query)

            if ($results.Count -ge 1) {

                # Filter the results
                if ($Database) {
                    $results = $results | Where-Object { $_.DatabaseName -in $Database }
                }

                if ($Action) {
                    $results = $results | Where-Object { $_.Action -in $Action }
                }

                if ($DateTimeFrom) {
                    $results = $results | Where-Object { $_.Logtime -ge $DateTimeFrom }
                }

                if ($DateTimeTo) {
                    $results = $results | Where-Object { $_.Logtime -le $DateTimeTo }
                }

                if ($Primary) {
                    $results = $results | Where-Object { $_.Instance -eq 'Primary' }
                }

                if ($Secondary) {
                    $results = $results | Where-Object { $_.Instance -eq 'Secondary' }
                }

                foreach ($result in $results) {
                    [PSCustomObject]@{
                        ComputerName   = $server.ComputerName
                        InstanceName   = $server.ServiceName
                        SqlInstance    = $server.DomainInstanceName
                        Database       = $result.DatabaseName
                        Instance       = $result.Instance
                        Action         = $result.Action
                        SessionID      = $result.SessionID
                        SequenceNumber = $result.SequenceNumber
                        LogTime        = $result.LogTime
                        Message        = $result.Message
                    }

                }
            } else {
                Write-Message -Message "No log shipping errors found" -Level Verbose
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias Get-DbaLogShippingError
    }
}

tools\dbatools\functions\Get-DbaDbMail.ps1

function Get-DbaDbMail {
    <#
    .SYNOPSIS
        Gets the database mail from SQL Server

    .DESCRIPTION
        Gets the database mail from SQL Server

    .PARAMETER SqlInstance
        TThe target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: DatabaseMail, DBMail, Mail
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaDbMail

    .EXAMPLE
        PS C:\> Get-DbaDbMail -SqlInstance sql01\sharepoint

        Returns the db mail server object on sql01\sharepoint

    .EXAMPLE
        PS C:\> Get-DbaDbMail -SqlInstance sql01\sharepoint | Select *

        Returns the db mail server object on sql01\sharepoint then return a bunch more columns

    .EXAMPLE
        PS C:\> $servers = "sql2014","sql2016", "sqlcluster\sharepoint"
        PS C:\> $servers | Get-DbaDbMail

        Returns the db mail server object for "sql2014","sql2016" and "sqlcluster\sharepoint"

    #>
    [CmdletBinding()]
    param (
        [Parameter(ValueFromPipeline, Mandatory)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category Connectiondbmail -dbmailRecord $_ -Target $instance -Continue
            }

            try {
                $mailserver = $server.Mail
                Add-Member -Force -InputObject $mailserver -MemberType NoteProperty -Name ComputerName -value $server.ComputerName
                Add-Member -Force -InputObject $mailserver -MemberType NoteProperty -Name InstanceName -value $server.ServiceName
                Add-Member -Force -InputObject $mailserver -MemberType NoteProperty -Name SqlInstance -value $server.DomainInstanceName
                $mailserver | Select-DefaultView -Property ComputerName, InstanceName, SqlInstance, Profiles, Accounts, ConfigurationValues, Properties
            } catch {
                Stop-Function -Message "Failure" -ErrorRecord $_ -Continue
            }
        }
    }
}

tools\dbatools\functions\Get-DbaDbMailAccount.ps1

function Get-DbaDbMailAccount {
    <#
    .SYNOPSIS
        Gets database mail accounts from SQL Server

    .DESCRIPTION
        Gets database mail accounts from SQL Server

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Account
        Specifies one or more account(s) to get. If unspecified, all accounts will be returned.

    .PARAMETER ExcludeAccount
        Specifies one or more account(s) to exclude.

    .PARAMETER InputObject
        Accepts pipeline input from Get-DbaDbMail

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: DatabaseMail, DbMail, Mail
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MITIT

    .LINK
        https://dbatools.io/Get-DbaDbMailAccount

    .EXAMPLE
        PS C:\> Get-DbaDbMailAccount -SqlInstance sql01\sharepoint

        Returns Database Mail accounts on sql01\sharepoint

    .EXAMPLE
        PS C:\> Get-DbaDbMailAccount -SqlInstance sql01\sharepoint -Account 'The DBA Team'

        Returns The DBA Team Database Mail account from sql01\sharepoint

    .EXAMPLE
        PS C:\> Get-DbaDbMailAccount -SqlInstance sql01\sharepoint | Select *

        Returns the Database Mail accounts on sql01\sharepoint then return a bunch more columns

    .EXAMPLE
        PS C:\> $servers = "sql2014","sql2016", "sqlcluster\sharepoint"
        PS C:\> $servers | Get-DbaDbMail | Get-DbaDbMailAccount

        Returns the Database Mail accounts for "sql2014","sql2016" and "sqlcluster\sharepoint"

    #>
    [CmdletBinding()]
    param (
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [string[]]$Account,
        [string[]]$ExcludeAccount,
        [Parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Mail.SqlMail[]]$InputObject,
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            $InputObject += Get-DbaDbMail -SqlInstance $SqlInstance -SqlCredential $SqlCredential
        }

        if (-not $InputObject) {
            Stop-Function -Message "No servers to process"
            return
        }

        foreach ($mailserver in $InputObject) {
            try {
                $accounts = $mailserver.Accounts

                if ($Account) {
                    $accounts = $accounts | Where-Object Name -in $Account
                }

                If ($ExcludeAccount) {
                    $accounts = $accounts | Where-Object Name -notin $ExcludeAccount
                }

                $accounts | Add-Member -Force -MemberType NoteProperty -Name ComputerName -value $mailserver.ComputerName
                $accounts | Add-Member -Force -MemberType NoteProperty -Name InstanceName -value $mailserver.InstanceName
                $accounts | Add-Member -Force -MemberType NoteProperty -Name SqlInstance -value $mailserver.SqlInstance
                $accounts | Select-DefaultView -Property ComputerName, InstanceName, SqlInstance, ID, Name, DisplayName, Description, EmailAddress, ReplyToAddress, IsBusyAccount, MailServers
            } catch {
                Stop-Function -Message "Failure" -ErrorRecord $_ -Continue
            }
        }
    }
}

tools\dbatools\functions\Get-DbaAgentProxy.ps1

function Get-DbaAgentProxy {
    <#
    .SYNOPSIS
        Returns all SQL Agent proxies on a SQL Server Agent.

    .DESCRIPTION
        This function returns SQL Agent proxies.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Proxy
        The proxy to process - this list is auto-populated from the server. If unspecified, all proxies will be processed.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Agent, SMO
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaAgentProxy

    .EXAMPLE
        PS C:\> Get-DbaAgentProxy -SqlInstance ServerA,ServerB\instanceB

        Returns all SQL Agent proxies on serverA and serverB\instanceB

    .EXAMPLE
        PS C:\> 'serverA','serverB\instanceB' | Get-DbaAgentProxy

        Returns all SQL Agent proxies  on serverA and serverB\instanceB

    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "Instance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$Proxy,
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            Write-Message -Level Verbose -Message "Getting Edition from $server"
            Write-Message -Level Verbose -Message "$server is a $($server.Edition)"

            if ($server.Edition -like 'Express*') {
                Stop-Function -Message "There is no SQL Agent on $server, it's a $($server.Edition)" -Continue
            }

            $defaults = "ComputerName", "SqlInstance", "InstanceName", "Name", "ID", "CredentialID", "CredentialIdentity", "CredentialName", "Description", "IsEnabled"

            $proxies = $server.Jobserver.ProxyAccounts

            if ($proxy) {
                $proxies = $proxies | Where-Object Name -In $proxy
            }

            foreach ($px in $proxies) {
                Add-Member -Force -InputObject $px -MemberType NoteProperty -Name ComputerName -value $server.ComputerName
                Add-Member -Force -InputObject $px -MemberType NoteProperty -Name InstanceName -value $server.ServiceName
                Add-Member -Force -InputObject $px -MemberType NoteProperty -Name SqlInstance -value $server.DomainInstanceName
                Select-DefaultView -InputObject $px -Property $defaults
            }
        }
    }
}

tools\dbatools\functions\Get-DbaAgentOperator.ps1

function Get-DbaAgentOperator {
    <#
    .SYNOPSIS
        Returns all SQL Agent operators on a SQL Server Agent.

    .DESCRIPTION
        This function returns SQL Agent operators.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Operator
        The operator(s) to process - this list is auto-populated from the server. If unspecified, all operators will be processed.

    .PARAMETER ExcludeOperator
        The operator(s) to exclude - this list is auto-populated from the server

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Agent, Operator
        Author: Klaas Vandenberghe (@PowerDBAKlaas)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaAgentOperator

    .EXAMPLE
        PS C:\> Get-DbaAgentOperator -SqlInstance ServerA,ServerB\instanceB

        Returns any SQL Agent operators on serverA and serverB\instanceB

    .EXAMPLE
        PS C:\> 'ServerA','ServerB\instanceB' | Get-DbaAgentOperator

        Returns all SQL Agent operators  on serverA and serverB\instanceB

    .EXAMPLE
        PS C:\> Get-DbaAgentOperator -SqlInstance ServerA -Operator Dba1,Dba2

        Returns only the SQL Agent Operators Dba1 and Dba2 on ServerA.

    .EXAMPLE
        PS C:\> Get-DbaAgentOperator -SqlInstance ServerA,ServerB -ExcludeOperator Dba3

        Returns all the SQL Agent operators on ServerA and ServerB, except the Dba3 operator.

    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]
        $SqlCredential,
        [object[]]$Operator,
        [object[]]$ExcludeOperator,
        [Alias('Silent')]
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            Write-Message -Level Verbose -Message "Getting Edition from $server"
            Write-Message -Level Verbose -Message "$server is a $($server.Edition)"

            if ($server.Edition -like 'Express*') {
                Stop-Function -Message "There is no SQL Agent on $server, it's a $($server.Edition)" -Continue -Target $server
            }

            $defaults = "ComputerName", "SqlInstance", "InstanceName", "Name", "ID", "Enabled as IsEnabled", "EmailAddress", "LastEmail"

            if ($Operator) {
                $operators = $server.JobServer.Operators | Where-Object Name -In $Operator
            } elseif ($ExcludeOperator) {
                $operators = $server.JobServer.Operators | Where-Object Name -NotIn $ExcludeOperator
            } else {
                $operators = $server.JobServer.Operators
            }

            $alerts = $server.JobServer.alerts

            foreach ($operat in $operators) {

                $jobs = $server.JobServer.jobs | Where-Object { $_.OperatorToEmail, $_.OperatorToNetSend, $_.OperatorToPage -contains $operat.Name }
                $lastemail = [dbadatetime]$operat.LastEmailDate

                $operatAlerts = @()
                foreach ($alert in $alerts) {
                    $dtAlert = $alert.EnumNotifications($operat.Name)
                    if ($dtAlert.Rows.Count -gt 0) {
                        $operatAlerts += $alert.Name
                        $alertlastemail = [dbadatetime]$alert.LastOccurrenceDate
                    }
                }

                Add-Member -Force -InputObject $operat -MemberType NoteProperty -Name ComputerName -Value $server.ComputerName
                Add-Member -Force -InputObject $operat -MemberType NoteProperty -Name InstanceName -Value $server.ServiceName
                Add-Member -Force -InputObject $operat -MemberType NoteProperty -Name SqlInstance -Value $server.DomainInstanceName
                Add-Member -Force -InputObject $operat -MemberType NoteProperty -Name RelatedJobs -Value $jobs
                Add-Member -Force -InputObject $operat -MemberType NoteProperty -Name LastEmail -Value $lastemail
                Add-Member -Force -InputObject $operat -MemberType NoteProperty -Name RelatedAlerts -Value $operatAlerts
                Add-Member -Force -InputObject $operat -MemberType NoteProperty -Name AlertLastEmail -Value $alertlastemail
                Select-DefaultView -InputObject $operat -Property $defaults
            }
        }
    }
}

tools\dbatools\functions\Get-DbaAgentLog.ps1

function Get-DbaAgentLog {
    <#
    .SYNOPSIS
        Gets the "SQL Agent Error Log" of an instance

    .DESCRIPTION
        Gets the "SQL Agent Error Log" of an instance. Returns all 10 error logs by default.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Allows you to login to servers using SQL Logins as opposed to Windows Auth/Integrated/Trusted.

    .PARAMETER LogNumber
        An Int32 value that specifies the index number of the error log required. Error logs are listed 0 through 9 where 0 is the current error log and 9 is the oldest.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Logging
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaAgentLog

    .EXAMPLE
        PS C:\> Get-DbaAgentLog -SqlInstance sql01\sharepoint

        Returns the entire error log for the SQL Agent on sql01\sharepoint

    .EXAMPLE
        PS C:\> Get-DbaAgentLog -SqlInstance sql01\sharepoint -LogNumber 3, 6

        Returns log numbers 3 and 6 for the SQL Agent on sql01\sharepoint

    .EXAMPLE
        PS C:\> $servers = "sql2014","sql2016", "sqlcluster\sharepoint"
        PS C:\> $servers | Get-DbaAgentLog -LogNumber 0

        Returns the most recent SQL Agent error logs for "sql2014","sql2016" and "sqlcluster\sharepoint"

    #>
    [CmdletBinding()]
    param (
        [Parameter(ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]
        $SqlCredential,
        [ValidateRange(0, 9)]
        [int[]]$LogNumber,
        [Alias('Silent')]
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            if ($LogNumber) {
                foreach ($number in $lognumber) {
                    try {
                        foreach ($object in $server.JobServer.ReadErrorLog($number)) {
                            Write-Message -Level Verbose -Message "Processing $object"
                            Add-Member -Force -InputObject $object -MemberType NoteProperty ComputerName -value $server.ComputerName
                            Add-Member -Force -InputObject $object -MemberType NoteProperty InstanceName -value $server.ServiceName
                            Add-Member -Force -InputObject $object -MemberType NoteProperty SqlInstance -value $server.DomainInstanceName

                            # Select all of the columns you'd like to show
                            Select-DefaultView -InputObject $object -Property ComputerName, InstanceName, SqlInstance, LogDate, ProcessInfo, Text
                        }
                    } catch {
                        Stop-Function -Continue -Target $server -Message "Could not read from SQL Server Agent"
                    }
                }
            } else {
                try {
                    foreach ($object in $server.JobServer.ReadErrorLog()) {
                        Write-Message -Level Verbose -Message "Processing $object"
                        Add-Member -Force -InputObject $object -MemberType NoteProperty ComputerName -value $server.ComputerName
                        Add-Member -Force -InputObject $object -MemberType NoteProperty InstanceName -value $server.ServiceName
                        Add-Member -Force -InputObject $object -MemberType NoteProperty SqlInstance -value $server.DomainInstanceName

                        # Select all of the columns you'd like to show
                        Select-DefaultView -InputObject $object -Property ComputerName, InstanceName, SqlInstance, LogDate, ProcessInfo, Text
                    }
                } catch {
                    Stop-Function -Continue -Target $server -Message "Could not read from SQL Server Agent"
                }
            }
        }
    }
}

tools\dbatools\functions\Get-DbaDbMailProfile.ps1

function Get-DbaDbMailProfile {
    <#
    .SYNOPSIS
        Gets database mail profiles from SQL Server

    .DESCRIPTION
        Gets database mail profiles from SQL Server

    .PARAMETER SqlInstance
        TThe target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Profile
        Specifies one or more profile(s) to get. If unspecified, all profiles will be returned.

    .PARAMETER ExcludeProfile
        Specifies one or more profile(s) to exclude.

    .PARAMETER InputObject
        Accepts pipeline input from Get-DbaDbMail

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: DatabaseMail, DBMail, Mail
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaDbMailProfile

    .EXAMPLE
        PS C:\> Get-DbaDbMailProfile -SqlInstance sql01\sharepoint

        Returns DBMail profiles on sql01\sharepoint

    .EXAMPLE
        PS C:\> Get-DbaDbMailProfile -SqlInstance sql01\sharepoint -Profile 'The DBA Team'

        Returns The DBA Team DBMail profile from sql01\sharepoint

    .EXAMPLE
        PS C:\> Get-DbaDbMailProfile -SqlInstance sql01\sharepoint | Select *

        Returns the DBMail profiles on sql01\sharepoint then return a bunch more columns

    .EXAMPLE
        PS C:\> $servers = "sql2014","sql2016", "sqlcluster\sharepoint"
        PS C:\> $servers | Get-DbaDbMail | Get-DbaDbMailProfile

        Returns the DBMail profiles for "sql2014","sql2016" and "sqlcluster\sharepoint"

    #>
    [CmdletBinding()]
    param (
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [string[]]$Profile,
        [string[]]$ExcludeProfile,
        [Parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Mail.SqlMail[]]$InputObject,
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            $InputObject += Get-DbaDbMail -SqlInstance $SqlInstance -SqlCredential $SqlCredential
        }

        if (-not $InputObject) {
            Stop-Function -Message "No servers to process"
            return
        }

        foreach ($mailserver in $InputObject) {
            try {
                $profiles = $mailserver.Profiles

                if ($Profile) {
                    $profiles = $profiles | Where-Object Name -in $Profile
                }

                If ($ExcludeProfile) {
                    $profiles = $profiles | Where-Object Name -notin $ExcludeProfile

                }

                $profiles | Add-Member -Force -MemberType NoteProperty -Name ComputerName -value $mailserver.ComputerName
                $profiles | Add-Member -Force -MemberType NoteProperty -Name InstanceName -value $mailserver.InstanceName
                $profiles | Add-Member -Force -MemberType NoteProperty -Name SqlInstance -value $mailserver.SqlInstance

                $profiles | Select-DefaultView -Property ComputerName, InstanceName, SqlInstance, ID, Name, Description, ForceDeleteForActiveProfiles, IsBusyProfile
            } catch {
                Stop-Function -Message "Failure" -ErrorRecord $_ -Continue
            }
        }
    }
}

tools\dbatools\functions\Get-DbaDbMailServer.ps1

function Get-DbaDbMailServer {
    <#
    .SYNOPSIS
        Gets database mail servers from SQL Server

    .DESCRIPTION
        Gets database mail servers from SQL Server

    .PARAMETER SqlInstance
        TThe target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Server
        Specifies one or more server(s) to get. If unspecified, all servers will be returned.

    .PARAMETER Account
        Get only the mail server associated with specific accounts

    .PARAMETER InputObject
        Accepts pipeline input from Get-DbaDbMail

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: DatabaseMail, DBMail, Mail
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaDbMailServer

    .EXAMPLE
        PS C:\> Get-DbaDbMailServer -SqlInstance sql01\sharepoint

        Returns all DBMail servers on sql01\sharepoint

    .EXAMPLE
        PS C:\> Get-DbaDbMailServer -SqlInstance sql01\sharepoint -Server DbaTeam

        Returns The DBA Team DBMail server from sql01\sharepoint

    .EXAMPLE
        PS C:\> Get-DbaDbMailServer -SqlInstance sql01\sharepoint | Select *

        Returns the DBMail servers on sql01\sharepoint then return a bunch more columns

    .EXAMPLE
        PS C:\> $servers = "sql2014","sql2016", "sqlcluster\sharepoint"
        PS C:\> $servers | Get-DbaDbMail | Get-DbaDbMailServer

        Returns the DBMail servers for "sql2014","sql2016" and "sqlcluster\sharepoint"

    #>
    [CmdletBinding()]
    param (
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [Alias("Name")]
        [string[]]$Server,
        [string[]]$Account,
        [Parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Mail.SqlMail[]]$InputObject,
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            $InputObject += Get-DbaDbMail -SqlInstance $SqlInstance -SqlCredential $SqlCredential
        }

        if (-not $InputObject) {
            Stop-Function -Message "No servers to process"
            return
        }

        foreach ($mailserver in $InputObject) {
            try {
                $accounts = $mailserver | Get-DbaDbMailAccount -Account $Account
                $servers = $accounts.MailServers

                if ($Server) {
                    $servers = $servers | Where-Object Name -in $Server
                }

                if ($servers) {
                    $servers | Add-Member -Force -MemberType NoteProperty -Name ComputerName -value $mailserver.ComputerName
                    $servers | Add-Member -Force -MemberType NoteProperty -Name InstanceName -value $mailserver.InstanceName
                    $servers | Add-Member -Force -MemberType NoteProperty -Name SqlInstance -value $mailserver.SqlInstance
                    $servers | Add-Member -Force -MemberType NoteProperty -Name Account -value $servers[0].Parent.Name
                    $servers | Select-DefaultView -Property ComputerName, InstanceName, SqlInstance, Account, Name, Port, EnableSsl, ServerType, UserName, UseDefaultCredentials, NoCredentialChange
                }
            } catch {
                Stop-Function -Message "Failure" -ErrorRecord $_ -Continue
            }
        }
    }
}

tools\dbatools\functions\Get-DbaDbMasterKey.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaDbMasterKey {
    <#
    .SYNOPSIS
        Gets specified database master key

    .DESCRIPTION
        Gets specified database master key

    .PARAMETER SqlInstance
        The target SQL Server instance

    .PARAMETER SqlCredential
        Allows you to login to SQL Server using alternative credentials

    .PARAMETER Database
        Get master key from specific database

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto-populated from the server

    .PARAMETER InputObject
        Database object piped in from Get-DbaDatabase

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Certificate, Database
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Get-DbaDbMasterKey -SqlInstance sql2016

        Gets all master database keys

    .EXAMPLE
        PS C:\> Get-DbaDbMasterKey -SqlInstance Server1 -Database db1

        Gets the master key for the db1 database

    #>
    [CmdletBinding()]
    param (
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$Database,
        [string[]]$ExcludeDatabase,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Database[]]$InputObject,
        [switch]$EnableException
    )

    process {
        if ($SqlInstance) {
            $InputObject += Get-DbaDatabase -SqlInstance $SqlInstance -Database $Database -ExcludeDatabase $ExcludeDatabase
        }

        foreach ($db in $InputObject) {
            if (!$db.IsAccessible) {
                Write-Message -Level Warning -Message "Database $db on $($db.Parent) is not accessible. Skipping."
                continue
            }

            $masterkey = $db.MasterKey

            if (!$masterkey) {
                Write-Message -Message "No master key exists in the $db database on $instance" -Target $db -Level Verbose
                continue
            }

            Add-Member -Force -InputObject $masterkey -MemberType NoteProperty -Name ComputerName -value $db.Parent.ComputerName
            Add-Member -Force -InputObject $masterkey -MemberType NoteProperty -Name InstanceName -value $db.Parent.ServiceName
            Add-Member -Force -InputObject $masterkey -MemberType NoteProperty -Name SqlInstance -value $db.Parent.DomainInstanceName
            Add-Member -Force -InputObject $masterkey -MemberType NoteProperty -Name Database -value $db.Name

            Select-DefaultView -InputObject $masterkey -Property ComputerName, InstanceName, SqlInstance, Database, CreateDate, DateLastModified, IsEncryptedByServer
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Get-DbaDatabaseMasterKey
    }
}

tools\dbatools\functions\Get-DbaAgentJobStep.ps1

function Get-DbaAgentJobStep {
    <#
    .SYNOPSIS
        Gets SQL Agent Job Step information for each instance(s) of SQL Server.

    .DESCRIPTION
        The Get-DbaAgentJobStep returns connected SMO object for SQL Agent Job Step for each instance(s) of SQL Server.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Job
        The job(s) to process - this list is auto-populated from the server. If unspecified, all jobs will be processed.

    .PARAMETER ExcludeJob
        The job(s) to exclude - this list is auto-populated from the server.

    .PARAMETER ExcludeDisabledJobs
        Switch will exclude disabled jobs from the output.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Job, Agent
        Author: Klaas Vandenberghe (@PowerDbaKlaas), http://powerdba.eu

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaAgentJobStep

    .EXAMPLE
        PS C:\> Get-DbaAgentJobStep -SqlInstance localhost

        Returns all SQL Agent Job Steps on the local default SQL Server instance

    .EXAMPLE
        PS C:\> Get-DbaAgentJobStep -SqlInstance localhost, sql2016

        Returns all SQL Agent Job Steps for the local and sql2016 SQL Server instances

    .EXAMPLE
        PS C:\> Get-DbaAgentJobStep -SqlInstance localhost -Job BackupData, BackupDiff

        Returns all SQL Agent Job Steps for the jobs named BackupData and BackupDiff from the local SQL Server instance.

    .EXAMPLE
        PS C:\> Get-DbaAgentJobStep -SqlInstance localhost -ExcludeJob BackupDiff

        Returns all SQL Agent Job Steps for the local SQL Server instances, except for the BackupDiff Job.

    .EXAMPLE
        PS C:\> Get-DbaAgentJobStep -SqlInstance localhost -ExcludeDisabledJobs

        Returns all SQL Agent Job Steps for the local SQL Server instances, excluding the disabled jobs.

    .EXAMPLE
        PS C:\> $servers | Get-DbaAgentJobStep

        Find all of your Job Steps from SQL Server instances in the $servers collection

    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]
        $SqlCredential,
        [object[]]$Job,
        [object[]]$ExcludeJob,
        [switch]$ExcludeDisabledJobs,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }
            Write-Message -Level Verbose -Message "Collecting jobs on $instance"
            $jobs = $server.JobServer.Jobs

            if ($Job) {
                $jobs = $jobs | Where-Object Name -In $Job
            }
            if ($ExcludeJob) {
                $jobs = $jobs | Where-Object Name -NotIn $ExcludeJob
            }
            if ($ExcludeDisabledJobs) {
                $jobs = $Jobs | Where-Object IsEnabled -eq $true
            }
            Write-Message -Level Verbose -Message "Collecting job steps on $instance"
            foreach ($agentJobStep in $jobs.jobsteps) {
                Add-Member -Force -InputObject $agentJobStep -MemberType NoteProperty -Name ComputerName -value $agentJobStep.Parent.Parent.Parent.ComputerName
                Add-Member -Force -InputObject $agentJobStep -MemberType NoteProperty -Name InstanceName -value $agentJobStep.Parent.Parent.Parent.ServiceName
                Add-Member -Force -InputObject $agentJobStep -MemberType NoteProperty -Name SqlInstance -value $agentJobStep.Parent.Parent.Parent.DomainInstanceName
                Add-Member -Force -InputObject $agentJobStep -MemberType NoteProperty -Name AgentJob -value $agentJobStep.Parent.Name

                Select-DefaultView -InputObject $agentJobStep -Property ComputerName, InstanceName, SqlInstance, AgentJob, Name, SubSystem, LastRunDate, LastRunOutcome, State
            }
        }
    }
}

tools\dbatools\functions\Get-DbaAgentJobOutputFile.ps1

function Get-DbaAgentJobOutputFile {
    <#
    .Synopsis
        Returns the Output File for each step of one or many agent job with the Job Names provided dynamically if
        required for one or more SQL Instances

    .DESCRIPTION
        This function returns for one or more SQL Instances the output file value for each step of one or many agent job with the Job Names
        provided dynamically. It will not return anything if there is no Output File

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.

    .PARAMETER SQLCredential
        Credential object used to connect to the SQL Server as a different user be it Windows or SQL Server. Windows users are determined by the existence of a backslash, so if you are intending to use an alternative Windows connection instead of a SQL login, ensure it contains a backslash.

    .PARAMETER Job
        The job(s) to process - this list is auto-populated from the server. If unspecified, all jobs will be processed.

    .PARAMETER ExcludeJob
        The job(s) to exclude - this list is auto-populated from the server

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Agent, Job
        Author: Rob Sewell (https://sqldbawithabeard.com) | Simone Bizzotto (@niphold)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Get-DbaAgentJobOutputFile -SqlInstance SERVERNAME -Job 'The Agent Job'

        This will return the configured paths to the output files for each of the job step of the The Agent Job Job
        on the SERVERNAME instance

    .EXAMPLE
        PS C:\> Get-DbaAgentJobOutputFile -SqlInstance SERVERNAME

        This will return the configured paths to the output files for each of the job step of all the Agent Jobs
        on the SERVERNAME instance

    .EXAMPLE
        PS C:\> Get-DbaAgentJobOutputFile -SqlInstance SERVERNAME,SERVERNAME2 -Job 'The Agent Job'

        This will return the configured paths to the output files for each of the job step of the The Agent Job Job
        on the SERVERNAME instance and SERVERNAME2

    .EXAMPLE
        $Servers = 'SERVER','SERVER\INSTANCE1'
        Get-DbaAgentJobOutputFile -SqlInstance $Servers -Job 'The Agent Job' -OpenFile

        This will return the configured paths to the output files for each of the job step of the The Agent Job Job
        on the SERVER instance and the SERVER\INSTANCE1 and open the files if they are available

    .EXAMPLE
        PS C:\> Get-DbaAgentJobOutputFile -SqlInstance SERVERNAME  | Out-GridView

        This will return the configured paths to the output files for each of the job step of all the Agent Jobs
        on the SERVERNAME instance and Pipe them to Out-GridView

    .EXAMPLE
        PS C:\> (Get-DbaAgentJobOutputFile -SqlInstance SERVERNAME | Out-GridView -PassThru).FileName | Invoke-Item

        This will return the configured paths to the output files for each of the job step of all the Agent Jobs
        on the SERVERNAME instance and Pipe them to Out-GridView and enable you to choose the output
        file and open it

    .EXAMPLE
        PS C:\> Get-DbaAgentJobOutputFile -SqlInstance SERVERNAME -Verbose

        This will return the configured paths to the output files for each of the job step of all the Agent Jobs
        on the SERVERNAME instance and also show the job steps without an output file

    #>
    [CmdletBinding()]
    param
    (
        [Parameter(Mandatory, HelpMessage = 'The SQL Server Instance',
            ValueFromPipeline,
            ValueFromPipelineByPropertyName = $true,
            ValueFromRemainingArguments = $false,
            Position = 0)]
        [ValidateNotNull()]
        [ValidateNotNullOrEmpty()]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Parameter(HelpMessage = 'SQL Credential',
            ValueFromPipelineByPropertyName = $true,
            ValueFromRemainingArguments = $false,
            Position = 1)]
        [PSCredential]$SqlCredential,
        [object[]]$Job,
        [object[]]$ExcludeJob,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ($instance in $sqlinstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $jobs = $Server.JobServer.Jobs
            if ($Job) {
                $jobs = $jobs | Where-Object Name -In $Job
            }
            if ($ExcludeJob) {
                $jobs = $jobs | Where-Object Name -NotIn $ExcludeJob
            }
            foreach ($j in $Jobs) {
                foreach ($Step in $j.JobSteps) {
                    if ($Step.OutputFileName) {
                        [pscustomobject]@{
                            ComputerName         = $server.ComputerName
                            InstanceName         = $server.ServiceName
                            SqlInstance          = $server.DomainInstanceName
                            Job                  = $j.Name
                            JobStep              = $Step.Name
                            OutputFileName       = $Step.OutputFileName
                            RemoteOutputFileName = Join-AdminUNC $Server.ComputerName $Step.OutputFileName
                            StepId               = $Step.Id
                        } | Select-DefaultView -ExcludeProperty StepId
                    } else {
                        Write-Message -Level Verbose -Message "$step for $j has no output file"
                    }
                }
            }
        }
    }
}

tools\dbatools\functions\Get-DbaDbMirrorMonitor.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaDbMirrorMonitor {
    <#
    .SYNOPSIS
        Returns status rows for a monitored database from the status table in which database mirroring monitoring history is stored and allows you to choose whether the procedure obtains the latest status beforehand.

    .DESCRIPTION
        Returns status rows for a monitored database from the status table in which database mirroring monitoring history is stored and allows you to choose whether the procedure obtains the latest status beforehand.

        Basically executes sp_dbmmonitorresults.

    .PARAMETER SqlInstance
        The target SQL Server instance

    .PARAMETER SqlCredential
        Login to the target instance using alternate Windows or SQL Login Authentication. Accepts credential objects (Get-Credential).

    .PARAMETER Database
        The target database.

    .PARAMETER Database
        The target database.

    .PARAMETER Update
        Updates the status for the database by calling sp_dbmmonitorupdate before computing the results.
        However, if the status table has been updated within the previous 15 seconds, or the user is not a member of the sysadmin fixed server role, the command runs without updating the status.

    .PARAMETER LimitResults
        Limit results. Defaults to last two hours.

        Options include:
        LastRow
        LastTwoHours
        LastFourHours
        LastEightHours
        LastDay
        LastTwoDays
        Last100Rows
        Last500Rows
        Last1000Rows
        Last1000000Rows

    .PARAMETER InputObject
        Allows piping from Get-DbaDatabase.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Mirror, HA
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaDbMirrorMonitor

    .EXAMPLE
        PS C:\> Get-DbaDbMirrorMonitor -SqlInstance sql2008, sql2012

        Returns last two hours' worth of status rows for a monitored database from the status table on sql2008 and sql2012.

    .EXAMPLE
        PS C:\> Get-DbaDbMirrorMonitor -SqlInstance sql2005 -LimitResults LastDay -Update

        Updates monitor stats then returns the last 24 hours worth of status rows for a monitored database from the status table on sql2008 and sql2012.

    #>
    [CmdletBinding()]
    param (
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$Database,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Database[]]$InputObject,
        [switch]$Update,
        [ValidateSet('LastRow', 'LastTwoHours', 'LastFourHours', 'LastEightHours', 'LastDay', 'LastTwoDays', 'Last100Rows', 'Last500Rows', 'Last1000Rows', 'Last1000000Rows')]
        [string]$LimitResults = 'LastTwoHours',
        [switch]$EnableException
    )
    begin {
        $rows = switch ($LimitResults) {
            'LastRow' { 0 }
            'LastTwoHours' { 1 }
            'LastFourHours' { 2 }
            'LastEightHours' { 3 }
            'LastDay' { 4 }
            'LastTwoDays' { 5 }
            'Last100Rows' { 6 }
            'Last500Rows' { 7 }
            'Last1000000Rows' { 8 }
        }
        $updatebool = switch ($Update) {
            $false { 0 }
            $true { 1 }
        }
    }
    process {
        foreach ($instance in $SqlInstance) {
            $InputObject += Get-DbaDatabase -SqlInstance $instance -SqlCredential $SqlCredential -Database $Database
        }

        foreach ($db in $InputObject) {
            if (-not ($db.Parent.Databases['msdb'].Tables['dbm_monitor_data'].Name)) {
                Stop-Function -Continue -Message "msdb.dbo.dbm_monitor_data not found. Please run Add-DbaDbMirrorMonitor then you can get monitor stats."
            }
            try {
                $sql = "msdb.dbo.sp_dbmmonitorresults $db, $rows, $updatebool"
                $results = $db.Parent.Query($sql)

                foreach ($result in $results) {
                    [pscustomobject]@{
                        ComputerName          = $db.Parent.ComputerName
                        InstanceName          = $db.Parent.ServiceName
                        SqlInstance           = $db.Parent.DomainInstanceName
                        DatabaseName          = $result.database_name
                        Role                  = $result.role
                        MirroringState        = $result.mirroring_state
                        WitnessStatus         = $result.witness_status
                        LogGenerationRate     = $result.log_generation_rate
                        UnsentLog             = $result.unsent_log
                        SendRate              = $result.send_rate
                        UnrestoredLog         = $result.unrestored_log
                        RecoveryRate          = $result.recovery_rate
                        TransactionDelay      = $result.transaction_delay
                        TransactionsPerSecond = $result.transactions_per_sec
                        AverageDelay          = $result.average_delay
                        TimeRecorded          = $result.time_recorded
                        TimeBehind            = $result.time_behind
                        LocalTime             = $result.local_time
                    }
                }
            } catch {
                Stop-Function -Message "Failure" -ErrorRecord $_
            }
        }
    }
}

tools\dbatools\functions\Get-DbaDbPageInfo.ps1

#ValidationTags#CodeStyle,Messaging,FlowControl,Pipeline#
function Get-DbaDbPageInfo {
    <#
    .SYNOPSIS
        Get-DbaDbPageInfo will return page information for a database

    .DESCRIPTION
        Get-DbaDbPageInfo is able to return information about the pages in a database.
        It's possible to return the information for multiple databases and filter on specific databases, schemas and tables.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        Filter to only get specific databases

    .PARAMETER Schema
        Filter to only get specific schemas

    .PARAMETER Table
        Filter to only get specific tables

    .PARAMETER InputObject
        Enables piping from Get-DbaDatabase

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Database, Page
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaDbPageInfo

    .EXAMPLE
        PS C:\> et-DbaDbPageInfo -SqlInstance sql2017

        Returns page information for all databases on sql2017

    .EXAMPLE
        PS C:\> Get-DbaDbPageInfo -SqlInstance sql2017, sql2016 -Database testdb

        Returns page information for the testdb on sql2017 and sql2016

    .EXAMPLE
        PS C:\> $servers | Get-DbaDatabase -Database testdb | Get-DbaDbPageInfo

        Returns page information for the testdb on all $servers

    #>
    [CmdLetBinding()]
    param (
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$Database,
        [string[]]$Schema,
        [string[]]$Table,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Database[]]$InputObject,
        [switch]$EnableException
    )
    begin {
        $sql = "SELECT SERVERPROPERTY('MachineName') AS ComputerName,
        ISNULL(SERVERPROPERTY('InstanceName'), 'MSSQLSERVER') AS InstanceName,
        SERVERPROPERTY('ServerName') AS SqlInstance, [Database] = DB_NAME(DB_ID()),
        ss.name AS [Schema], st.name AS [Table], dbpa.page_type_desc AS PageType,
                        dbpa.page_free_space_percent AS PageFreePercent,
                        IsAllocated =
                          CASE dbpa.is_allocated
                             WHEN 0 THEN 'False'
                             WHEN 1 THEN 'True'
                          END,
                        IsMixedPage =
                          CASE dbpa.is_mixed_page_allocation
                             WHEN 0 THEN 'False'
                             WHEN 1 THEN 'True'
                          END
                        FROM sys.dm_db_database_page_allocations(DB_ID(), NULL, NULL, NULL, 'DETAILED') AS dbpa
                        INNER JOIN sys.tables AS st ON st.object_id = dbpa.object_id
                        INNER JOIN sys.schemas AS ss ON ss.schema_id = st.schema_id"

        if ($Schema) {
            $sql = "$sql WHERE ss.name IN ('$($Schema -join "','")')"
        }

        if ($Table) {
            if ($schema) {
                $sql = "$sql AND st.name IN ('$($Table -join "','")')"
            } else {
                $sql = "$sql WHERE st.name IN ('$($Table -join "','")')"
            }
        }
    }
    process {
        # Loop through all the instances
        foreach ($instance in $SqlInstance) {

            # Try connecting to the instance
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 11
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            if ($Database) {
                $InputObject += $server.Databases | Where-Object { $_.Name -in $Database }
            } else {
                $InputObject += $server.Databases
            }
        }

        # Loop through each of databases
        foreach ($db in $InputObject) {
            # Revalidate the version of the server in case db is piped in
            try {
                if ($db.Parent.VersionMajor -ge 11) {
                    $db.Query($sql)
                } else {
                    Stop-Function -Message "Unsupported SQL Server version" -Target $db -Continue
                }
            } catch {
                Stop-Function -Message "Something went wrong executing the query" -ErrorRecord $_ -Target $instance -Continue
            }
        }
    }
}

tools\dbatools\functions\Get-DbaDbPartitionFunction.ps1

function Get-DbaDbPartitionFunction {
    <#
    .SYNOPSIS
        Gets database Partition Functions

    .DESCRIPTION
        Gets database Partition Functions

    .PARAMETER SqlInstance
        The target SQL Server instance or instances

    .PARAMETER SqlCredential
        Allows you to login to SQL Server using alternative credentials

    .PARAMETER Database
        To get users from specific database(s)

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto populated from the server

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Database
        Author: Klaas Vandenberghe ( @PowerDbaKlaas )

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Get-DbaDbPartitionFunction -SqlInstance sql2016

        Gets all database Partition Functions

    .EXAMPLE
        PS C:\> Get-DbaDbPartitionFunction -SqlInstance Server1 -Database db1

        Gets the Partition Functions for the db1 database

    .EXAMPLE
        PS C:\> Get-DbaDbPartitionFunction -SqlInstance Server1 -ExcludeDatabase db1

        Gets the Partition Functions for all databases except db1

    .EXAMPLE
        PS C:\> 'Sql1','Sql2/sqlexpress' | Get-DbaDbPartitionFunction

        Gets the Partition Functions for the databases on Sql1 and Sql2/sqlexpress

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $databases = $server.Databases | Where-Object IsAccessible

            if ($Database) {
                $databases = $databases | Where-Object Name -In $Database
            }
            if ($ExcludeDatabase) {
                $databases = $databases | Where-Object Name -NotIn $ExcludeDatabase
            }

            foreach ($db in $databases) {
                if (!$db.IsAccessible) {
                    Write-Message -Level Warning -Message "Database $db is not accessible. Skipping."
                    continue
                }

                $partitionfunctions = $db.partitionfunctions

                if (!$partitionfunctions) {
                    Write-Message -Message "No Partition Functions exist in the $db database on $instance" -Target $db -Level Verbose
                    continue
                }

                $partitionfunctions | ForEach-Object {

                    Add-Member -Force -InputObject $_ -MemberType NoteProperty -Name ComputerName -value $server.ComputerName
                    Add-Member -Force -InputObject $_ -MemberType NoteProperty -Name InstanceName -value $server.ServiceName
                    Add-Member -Force -InputObject $_ -MemberType NoteProperty -Name SqlInstance -value $server.DomainInstanceName
                    Add-Member -Force -InputObject $_ -MemberType NoteProperty -Name Database -value $db.Name

                    Select-DefaultView -InputObject $_ -Property ComputerName, InstanceName, SqlInstance, Database, CreateDate, Name, NumberOfPartitions
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Get-DbaDatabasePartitionFunction
    }
}

tools\dbatools\functions\Get-DbaDbPartitionScheme.ps1

function Get-DbaDbPartitionScheme {
    <#
    .SYNOPSIS
        Gets database Partition Schemes

    .DESCRIPTION
        Gets database Partition Schemes

    .PARAMETER SqlInstance
        The target SQL Server instance or instances

    .PARAMETER SqlCredential
        Allows you to login to SQL Server using alternative credentials

    .PARAMETER Database
        To get users from specific database(s)

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto populated from the server

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Database
        Author: Klaas Vandenberghe (@PowerDbaKlaas)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Get-DbaDbPartitionScheme -SqlInstance sql2016

        Gets all database Partition Schemes

    .EXAMPLE
        PS C:\> Get-DbaDbPartitionScheme -SqlInstance Server1 -Database db1

        Gets the Partition Schemes for the db1 database

    .EXAMPLE
        PS C:\> Get-DbaDbPartitionScheme -SqlInstance Server1 -ExcludeDatabase db1

        Gets the Partition Schemes for all databases except db1

    .EXAMPLE
        PS C:\> 'Sql1','Sql2/sqlexpress' | Get-DbaDbPartitionScheme

        Gets the Partition Schemes for the databases on Sql1 and Sql2/sqlexpress

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $databases = $server.Databases | Where-Object IsAccessible

            if ($Database) {
                $databases = $databases | Where-Object Name -In $Database
            }
            if ($ExcludeDatabase) {
                $databases = $databases | Where-Object Name -NotIn $ExcludeDatabase
            }

            foreach ($db in $databases) {
                if (!$db.IsAccessible) {
                    Write-Message -Level Warning -Message "Database $db is not accessible. Skipping."
                    continue
                }

                $PartitionSchemes = $db.PartitionSchemes

                if (!$PartitionSchemes) {
                    Write-Message -Message "No Partition Schemes exist in the $db database on $instance" -Target $db -Level Verbose
                    continue
                }

                $PartitionSchemes | ForEach-Object {

                    Add-Member -Force -InputObject $_ -MemberType NoteProperty -Name ComputerName -value $server.ComputerName
                    Add-Member -Force -InputObject $_ -MemberType NoteProperty -Name InstanceName -value $server.ServiceName
                    Add-Member -Force -InputObject $_ -MemberType NoteProperty -Name SqlInstance -value $server.DomainInstanceName
                    Add-Member -Force -InputObject $_ -MemberType NoteProperty -Name Database -value $db.Name

                    Select-DefaultView -InputObject $_ -Property ComputerName, InstanceName, SqlInstance, Database, Name, PartitionFunction
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Get-DbaDatabasePartitionScheme
    }
}

tools\dbatools\functions\Get-DbaDbQueryStoreOption.ps1

#ValidationTags#CodeStyle,Messaging,FlowControl,Pipeline#
function Get-DbaDbQueryStoreOption {
    <#
    .SYNOPSIS
        Get the Query Store configuration for Query Store enabled databases.

    .DESCRIPTION
        Retrieves and returns the Query Store configuration for every database that has the Query Store feature enabled.

    .OUTPUTS
        Microsoft.SqlServer.Management.Smo.QueryStoreOptions

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        SqlCredential object used to connect to the SQL Server as a different user.

    .PARAMETER Database
        The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto-populated from the server

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: QueryStore
        Author: Enrico van de Laar (@evdlaar) | Klaas Vandenberghe (@PowerDBAKlaas)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaQueryStoreOptions

    .EXAMPLE
        PS C:\> Get-DbaDbQueryStoreOption -SqlInstance ServerA\sql

        Returns Query Store configuration settings for every database on the ServerA\sql instance.

    .EXAMPLE
        PS C:\> Get-DbaDbQueryStoreOption -SqlInstance ServerA\sql | Where-Object {$_.ActualState -eq "ReadWrite"}

        Returns the Query Store configuration for all databases on ServerA\sql where the Query Store feature is in Read/Write mode.

    .EXAMPLE
        PS C:\> Get-DbaDbQueryStoreOption -SqlInstance localhost | format-table -AutoSize -Wrap

        Returns Query Store configuration settings for every database on the ServerA\sql instance inside a table format.

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]
        $SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {
        $ExcludeDatabase += 'master', 'tempdb'
    }
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 13
            } catch {
                Write-Message -Level Warning -Message "Can't connect to $instance. Moving on."
                continue
            }

            # We have to exclude all the system databases since they cannot have the Query Store feature enabled
            $dbs = Get-DbaDatabase -SqlInstance $server -ExcludeDatabase $ExcludeDatabase -Database $Database | Where-Object IsAccessible

            foreach ($db in $dbs) {
                Write-Message -Level Verbose -Message "Processing $($db.Name) on $instance"
                $QSO = $db.QueryStoreOptions

                Add-Member -Force -InputObject $QSO -MemberType NoteProperty -Name ComputerName -value $server.ComputerName
                Add-Member -Force -InputObject $QSO -MemberType NoteProperty -Name InstanceName -value $server.ServiceName
                Add-Member -Force -InputObject $QSO -MemberType NoteProperty -Name SqlInstance -value $server.DomainInstanceName
                Add-Member -Force -InputObject $QSO -MemberType NoteProperty Database -value $db.Name
                Select-DefaultView -InputObject $QSO -Property ComputerName, InstanceName, SqlInstance, Database, ActualState, DataFlushIntervalInSeconds, StatisticsCollectionIntervalInMinutes, MaxStorageSizeInMB, CurrentStorageSizeInMB, QueryCaptureMode, SizeBasedCleanupMode, StaleQueryThresholdInDays
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Get-DbaDbQueryStoreOptions
    }
}

tools\dbatools\functions\Get-DbaAgentJobHistory.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaAgentJobHistory {
    <#
    .SYNOPSIS
        Gets execution history of SQL Agent Job on instance(s) of SQL Server.

    .DESCRIPTION
        Get-DbaAgentJobHistory returns all information on the executions still available on each instance(s) of SQL Server submitted.
        The cleanup of SQL Agent history determines how many records are kept.

        https://msdn.microsoft.com/en-us/library/ms201680.aspx
        https://msdn.microsoft.com/en-us/library/microsoft.sqlserver.management.smo.agent.jobhistoryfilter(v=sql.120).aspx

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Job
        The name of the job from which the history is wanted. If unspecified, all jobs will be processed.

    .PARAMETER ExcludeJob
        The job(s) to exclude - this list is auto-populated from the server

    .PARAMETER StartDate
        The DateTime starting from which the history is wanted. If unspecified, all available records will be processed.

    .PARAMETER EndDate
        The DateTime before which the history is wanted. If unspecified, all available records will be processed.

    .PARAMETER ExcludeJobSteps
        Use this switch to discard all job steps, and return only the job totals

    .PARAMETER WithOutputFile
        Use this switch to retrieve the output file (only if you want step details). Bonus points, we handle the quirks
        of SQL Agent tokens to the best of our knowledge (https://technet.microsoft.com/it-it/library/ms175575(v=sql.110).aspx)

    .PARAMETER JobCollection
        An array of SMO jobs

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Job, Agent
        Author: Klaas Vandenberghe (@PowerDbaKlaas) | Simone Bizzotto (@niphold)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaAgentJobHistory

    .EXAMPLE
        PS C:\> Get-DbaAgentJobHistory -SqlInstance localhost

        Returns all SQL Agent Job execution results on the local default SQL Server instance.

    .EXAMPLE
        PS C:\> Get-DbaAgentJobHistory -SqlInstance localhost, sql2016

        Returns all SQL Agent Job execution results for the local and sql2016 SQL Server instances.

    .EXAMPLE
        PS C:\> 'sql1','sql2\Inst2K17' | Get-DbaAgentJobHistory

        Returns all SQL Agent Job execution results for sql1 and sql2\Inst2K17.

    .EXAMPLE
        PS C:\> Get-DbaAgentJobHistory -SqlInstance sql2\Inst2K17 | Select-Object *

        Returns all properties for all SQl Agent Job execution results on sql2\Inst2K17.

    .EXAMPLE
        PS C:\> Get-DbaAgentJobHistory -SqlInstance sql2\Inst2K17 -Job 'Output File Cleanup'

        Returns all properties for all SQl Agent Job execution results of the 'Output File Cleanup' job on sql2\Inst2K17.

    .EXAMPLE
        PS C:\> Get-DbaAgentJobHistory -SqlInstance sql2\Inst2K17 -Job 'Output File Cleanup' -WithOutputFile

        Returns all properties for all SQl Agent Job execution results of the 'Output File Cleanup' job on sql2\Inst2K17,
        with additional properties that show the output filename path

    .EXAMPLE
        PS C:\> Get-DbaAgentJobHistory -SqlInstance sql2\Inst2K17 -ExcludeJobSteps

        Returns the SQL Agent Job execution results for the whole jobs on sql2\Inst2K17, leaving out job step execution results.

    .EXAMPLE
        PS C:\> Get-DbaAgentJobHistory -SqlInstance sql2\Inst2K17 -StartDate '2017-05-22' -EndDate '2017-05-23 12:30:00'

        Returns the SQL Agent Job execution results between 2017/05/22 00:00:00 and 2017/05/23 12:30:00 on sql2\Inst2K17.

    .EXAMPLE
        PS C:\> Get-DbaAgentJob -SqlInstance sql2016 | Where-Object Name -Match backup | Get-DbaAgentJobHistory

        Gets all jobs with the name that match the regex pattern "backup" and then gets the job history from those. You can also use -Like *backup* in this example.

    #>
    [CmdletBinding(DefaultParameterSetName = "Default")]
    param (
        [parameter(Mandatory, ValueFromPipeline, ParameterSetName = "Server")]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]
        $SqlCredential,
        [object[]]$Job,
        [object[]]$ExcludeJob,
        [DateTime]$StartDate = "1900-01-01",
        [DateTime]$EndDate = $(Get-Date),
        [switch]$ExcludeJobSteps,
        [switch]$WithOutputFile,
        [parameter(Mandatory, ValueFromPipeline, ParameterSetName = "Collection")]
        [Microsoft.SqlServer.Management.Smo.Agent.Job]$JobCollection,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        $filter = New-Object Microsoft.SqlServer.Management.Smo.Agent.JobHistoryFilter
        $filter.StartRunDate = $StartDate
        $filter.EndRunDate = $EndDate


        if ($ExcludeJobSteps -and $WithOutputFile) {
            Stop-Function -Message "You can't use -ExcludeJobSteps and -WithOutputFile together"
        }

        function Get-JobHistory {
            [CmdletBinding()]
            param (
                $Server,
                $Job,
                [switch]$WithOutputFile
            )
            $tokenrex = [regex]'\$\((?<method>[^()]+)\((?<tok>[^)]+)\)\)|\$\((?<tok>[^)]+)\)'
            $propmap = @{
                'INST'      = $Server.ServiceName
                'MACH'      = $Server.ComputerName
                'SQLDIR'    = $Server.InstallDataDirectory
                'SQLLOGDIR' = $Server.ErrorLogPath
                #'STEPCT' loop number ?
                'SRVR'      = $Server.DomainInstanceName
                # WMI( property ) impossible
            }


            $squote_rex = [regex]"(?<!')'(?!')"
            $dquote_rex = [regex]'(?<!")"(?!")'
            $rbrack_rex = [regex]'(?<!])](?!])'

            function Resolve-TokenEscape($method, $value) {
                if (!$method) {
                    return $value
                }
                $value = switch ($method) {
                    'ESCAPE_SQUOTE' { $squote_rex.Replace($value, "''") }
                    'ESCAPE_DQUOTE' { $dquote_rex.Replace($value, '""') }
                    'ESCAPE_RBRACKET' { $rbrack_rex.Replace($value, ']]') }
                    'ESCAPE_NONE' { $value }
                    default { $value }
                }
                return $value
            }

            #'STEPID' =  stepid
            #'STRTTM' job begin time
            #'STRTDT' job begin date
            #'JOBID' = JobId
            function Resolve-JobToken($exec, $outfile, $outcome) {
                $n = $tokenrex.Matches($outfile)
                foreach ($x in $n) {
                    $tok = $x.Groups['tok'].Value
                    $EscMethod = $x.Groups['method'].Value
                    if ($propmap.containskey($tok)) {
                        $repl = Resolve-TokenEscape -method $EscMethod -value $propmap[$tok]
                        $outfile = $outfile.Replace($x.Value, $repl)
                    } elseif ($tok -eq 'STEPID') {
                        $repl = Resolve-TokenEscape -method $EscMethod -value $exec.StepID
                        $outfile = $outfile.Replace($x.Value, $repl)
                    } elseif ($tok -eq 'JOBID') {
                        # convert(binary(16), ?)
                        $repl = @('0x') + @($exec.JobID.ToByteArray() | ForEach-Object -Process { $_.ToString('X2') }) -join ''
                        $repl = Resolve-TokenEscape -method $EscMethod -value $repl
                        $outfile = $outfile.Replace($x.Value, $repl)
                    } elseif ($tok -eq 'STRTDT') {
                        $repl = Resolve-TokenEscape -method $EscMethod -value $outcome.RunDate.toString('yyyyMMdd')
                        $outfile = $outfile.Replace($x.Value, $repl)
                    } elseif ($tok -eq 'STRTTM') {
                        $repl = Resolve-TokenEscape -method $EscMethod -value ([int]$outcome.RunDate.toString('HHmmss')).toString()
                        $outfile = $outfile.Replace($x.Value, $repl)
                    } elseif ($tok -eq 'DATE') {
                        $repl = Resolve-TokenEscape -method $EscMethod -value $exec.RunDate.toString('yyyyMMdd')
                        $outfile = $outfile.Replace($x.Value, $repl)
                    } elseif ($tok -eq 'TIME') {
                        $repl = Resolve-TokenEscape -method $EscMethod -value ([int]$exec.RunDate.toString('HHmmss')).toString()
                        $outfile = $outfile.Replace($x.Value, $repl)
                    }
                }
                return $outfile
            }
            try {
                Write-Message -Message "Attempting to get job history from $instance" -Level Verbose
                if ($Job) {
                    foreach ($currentjob in $Job) {
                        $filter.JobName = $currentjob
                        $executions += $server.JobServer.EnumJobHistory($filter)
                    }
                } else {
                    $executions = $server.JobServer.EnumJobHistory($filter)
                }
                if ($ExcludeJobSteps) {
                    $executions = $executions | Where-Object { $_.StepID -eq 0 }
                }

                if ($WithOutputFile) {
                    $outmap = @{}
                    $outfiles = Get-DbaAgentJobOutputFile -SqlInstance $Server -SqlCredential $SqlCredential -Job $Job

                    foreach ($out in $outfiles) {
                        if (!$outmap.ContainsKey($out.Job)) {
                            $outmap[$out.Job] = @{}
                        }
                        $outmap[$out.Job][$out.StepId] = $out.OutputFileName
                    }
                }
                $outcome = [pscustomobject]@{}
                foreach ($execution in $executions) {
                    $status = switch ($execution.RunStatus) {
                        0 { "Failed" }
                        1 { "Succeeded" }
                        2 { "Retry" }
                        3 { "Canceled" }
                    }

                    Add-Member -Force -InputObject $execution -MemberType NoteProperty -Name ComputerName -value $server.ComputerName
                    Add-Member -Force -InputObject $execution -MemberType NoteProperty -Name InstanceName -value $server.ServiceName
                    Add-Member -Force -InputObject $execution -MemberType NoteProperty -Name SqlInstance -value $server.DomainInstanceName
                    $DurationInSeconds = ($execution.RunDuration % 100) + [int]( ($execution.RunDuration % 10000 ) / 100 ) * 60 + [int]( ($execution.RunDuration % 1000000 ) / 10000 ) * 60 * 60
                    Add-Member -Force -InputObject $execution -MemberType NoteProperty -Name StartDate -value ([dbadatetime]$execution.RunDate)
                    Add-Member -Force -InputObject $execution -MemberType NoteProperty -Name EndDate -value ([dbadatetime]$execution.RunDate.AddSeconds($DurationInSeconds))
                    Add-Member -Force -InputObject $execution -MemberType NoteProperty -Name Duration -value ([prettytimespan](New-TimeSpan -Seconds $DurationInSeconds))
                    Add-Member -Force -InputObject $execution -MemberType NoteProperty -Name Status -value $status
                    if ($WithOutputFile) {
                        if ($execution.StepID -eq 0) {
                            $outcome = $execution
                        }
                        try {
                            $outname = $outmap[$execution.JobName][$execution.StepID]
                            $outname = Resolve-JobToken -exec $execution -outcome $outcome -outfile $outname
                            $outremote = Join-AdminUNC $Server.ComputerName $outname
                        } catch {
                            $outname = ''
                            $outremote = ''
                        }
                        Add-Member -Force -InputObject $execution -MemberType NoteProperty -Name OutputFileName -value $outname
                        Add-Member -Force -InputObject $execution -MemberType NoteProperty -Name RemoteOutputFileName -value $outremote
                        # Add this in for easier ConvertTo-DbaTimeline Support
                        Add-Member -Force -InputObject $execution -MemberType NoteProperty -Name TypeName -value AgentJobHistory
                        Select-DefaultView -InputObject $execution -Property ComputerName, InstanceName, SqlInstance, 'JobName as Job', StepName, RunDate, StartDate, EndDate, Duration, Status, OperatorEmailed, Message, OutputFileName, RemoteOutputFileName -TypeName AgentJobHistory
                    } else {
                        Add-Member -Force -InputObject $execution -MemberType NoteProperty -Name TypeName -value AgentJobHistory
                        Select-DefaultView -InputObject $execution -Property ComputerName, InstanceName, SqlInstance, 'JobName as Job', StepName, RunDate, StartDate, EndDate, Duration, Status, OperatorEmailed, Message -TypeName AgentJobHistory
                    }

                }
            } catch {
                Stop-Function -Message "Could not get Agent Job History from $instance" -Target $instance -Continue
            }
        }
    }

    process {

        if (Test-FunctionInterrupt) { return }

        if ($JobCollection) {
            foreach ($currentjob in $JobCollection) {
                Get-JobHistory -Server $currentjob.Parent.Parent -Job $currentjob.Name -WithOutputFile:$WithOutputFile
            }
        }

        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }


            if ($ExcludeJob) {
                $jobs = $server.JobServer.Jobs.Name | Where-Object { $_ -notin $ExcludeJob }
                foreach ($currentjob in $jobs) {
                    Get-JobHistory -Server $server -Job $currentjob -WithOutputFile:$WithOutputFile
                }
            } else {
                Get-JobHistory -Server $server -Job $Job -WithOutputFile:$WithOutputFile
            }
        }
    }
}

tools\dbatools\functions\Get-DbaDbRestoreHistory.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaDbRestoreHistory {
    <#
    .SYNOPSIS
        Returns restore history details for databases on a SQL Server.

    .DESCRIPTION
        By default, this command will return the server name, database, username, restore type, date, from file and to files.

        Thanks to https://www.mssqltips.com/SqlInstancetip/1724/when-was-the-last-time-your-sql-server-database-was-restored/ for the query and https://sqlstudies.com/2016/07/27/when-was-this-database-restored/ for the idea.

    .PARAMETER SqlInstance
        Specifies the SQL Server instance(s) to operate on. Requires SQL Server 2005 or higher.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        Specifies the database(s) to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        Specifies the database(s) to exclude from processing. Options for this list are auto-populated from the server.

    .PARAMETER Since
        Specifies a datetime to use as the starting point for searching backup history.

    .PARAMETER Force
        Deprecated.

    .PARAMETER Last
        If this switch is enabled, the last restore action performed on each database is returned.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: DisasterRecovery, Backup, Restore
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaDbRestoreHistory

    .EXAMPLE
        PS C:\> Get-DbaDbRestoreHistory -SqlInstance sql2016

        Returns server name, database, username, restore type, date for all restored databases on sql2016.

    .EXAMPLE
        PS C:\> Get-DbaDbRestoreHistory -SqlInstance sql2016 -Database db1, db2 -Since '2016-07-01 10:47:00'

        Returns restore information only for databases db1 and db2 on sql2016 since July 1, 2016 at 10:47 AM.

    .EXAMPLE
        PS C:\> Get-DbaDbRestoreHistory -SqlInstance sql2014, sql2016 -Exclude db1

        Returns restore information for all databases except db1 on sql2014 and sql2016.

    .EXAMPLE
        PS C:\> $cred = Get-Credential sqladmin
        PS C:\> Get-DbaDbRestoreHistory -SqlInstance sql2014 -Database AdventureWorks2014, pubs -SqlCredential $cred | Format-Table

        Returns database restore information for AdventureWorks2014 and pubs database on sql2014, connects using SQL Authentication via sqladmin account. Formats the data as a table.

    .EXAMPLE
        PS C:\> Get-DbaCmsRegServer -SqlInstance sql2016 | Get-DbaDbRestoreHistory

        Returns database restore information for every database on every server listed in the Central Management Server on sql2016.

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [datetime]$Since,
        [switch]$Force,
        [switch]$Last,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        Test-DbaDeprecation -DeprecatedOn "1.0.0.0" -EnableException:$false -Parameter 'Force'

        if ($Since -ne $null) {
            $Since = $Since.ToString("yyyy-MM-ddTHH:mm:ss")
        }
    }

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 9
                $computername = $server.ComputerName
                $instancename = $server.ServiceName
                $servername = $server.DomainInstanceName

                if ($force -eq $true) {
                    $select = "SELECT '$computername' AS [ComputerName],
                    '$instancename' AS [InstanceName],
                    '$servername' AS [SqlInstance], * "
                } else {
                    $select = "SELECT
                    '$computername' AS [ComputerName],
                    '$instancename' AS [InstanceName],
                    '$servername' AS [SqlInstance],
                     rsh.destination_database_name AS [Database],
                     --rsh.restore_history_id as RestoreHistoryID,
                     rsh.user_name AS [Username],
                     CASE
                         WHEN rsh.restore_type = 'D' THEN 'Database'
                         WHEN rsh.restore_type = 'F' THEN 'File'
                         WHEN rsh.restore_type = 'G' THEN 'Filegroup'
                         WHEN rsh.restore_type = 'I' THEN 'Differential'
                         WHEN rsh.restore_type = 'L' THEN 'Log'
                         WHEN rsh.restore_type = 'V' THEN 'Verifyonly'
                         WHEN rsh.restore_type = 'R' THEN 'Revert'
                         ELSE rsh.restore_type
                     END AS [RestoreType],
                     rsh.restore_date AS [Date],
                     ISNULL(STUFF((SELECT ', ' + bmf.physical_device_name
                                    FROM msdb.dbo.backupmediafamily bmf
                                   WHERE bmf.media_set_id = bs.media_set_id
                                 FOR XML PATH('')), 1, 2, ''), '') AS [From],
                     ISNULL(STUFF((SELECT ', ' + rf.destination_phys_name
                                    FROM msdb.dbo.restorefile rf
                                   WHERE rsh.restore_history_id = rf.restore_history_id
                                 FOR XML PATH('')), 1, 2, ''), '') AS [To],
                    bs.first_lsn,
                    bs.last_lsn,
                    bs.checkpoint_lsn,
                    bs.database_backup_lsn,
                    bs.backup_finish_date,
                    bs.backup_finish_date AS BackupFinishDate
                    "
                }

                $from = " FROM msdb.dbo.restorehistory rsh
                    INNER JOIN msdb.dbo.backupset bs ON rsh.backup_set_id = bs.backup_set_id"

                if ($ExcludeDatabase -or $Database -or $Since -or $last) {
                    $where = " WHERE "
                }

                $wherearray = @()

                if ($ExcludeDatabase) {
                    $dblist = $ExcludeDatabase -join "','"
                    $wherearray += " destination_database_name not in ('$dblist')"
                }

                if ($Database) {
                    $dblist = $Database -join "','"
                    $wherearray += "destination_database_name in ('$dblist')"
                }

                if ($null -ne $Since) {
                    $wherearray += "rsh.restore_date >= '$since'"
                }


                if ($last) {
                    $wherearray += "rsh.backup_set_id in
                        (select max(backup_set_id) from msdb.dbo.restorehistory
                        group by destination_database_name
                        )"
                }

                if ($where.length -gt 0) {
                    $wherearray = $wherearray -join " and "
                    $where = "$where $wherearray"
                }

                $sql = "$select $from $where"

                Write-Message -Level Debug -Message $sql

                $results = $server.ConnectionContext.ExecuteWithResults($sql).Tables.Rows
                if ($last) {
                    $ga = $results | Group-Object Database
                    $tmpres = @()
                    foreach ($g in $ga) {
                        $tmpres += $g.Group | Sort-Object -Property Date -Descending | Select-Object -First 1
                    }
                    $results = $tmpres
                }
                $results | Select-DefaultView -ExcludeProperty first_lsn, last_lsn, checkpoint_lsn, database_backup_lsn, backup_finish_date
            } catch {
                Stop-Function -Message "Failure" -Target $SqlInstance -Error $_ -Exception $_.Exception.InnerException -Continue
            }
        }
    }
}

tools\dbatools\functions\Get-DbaDbRoleMember.ps1

#ValidationTags#CodeStyle, Messaging, FlowControl, Pipeline#
function Get-DbaDbRoleMember {
    <#
    .SYNOPSIS
        Get members of database roles for each instance(s) of SQL Server.

    .DESCRIPTION
        The Get-DbaDbRoleMember returns connected SMO object for database roles for each instance(s) of SQL Server.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternate Windows or SQL Login Authentication. Accepts credential objects (Get-Credential).

    .PARAMETER Database
        The database(s) to process. This list is auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        The database(s) to exclude. This list is auto-populated from the server.

    .PARAMETER Role
        The role(s) to process. If unspecified, all roles will be processed.

    .PARAMETER ExcludeRole
        The role(s) to exclude.

    .PARAMETER ExcludeFixedRole
        Excludes all members of fixed roles.

    .PARAMETER IncludeSystemUser
        Includes system users. By default system users are not included.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Role, Database, Security, Login
        Author: Klaas Vandenberghe (@PowerDBAKlaas)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaDbRoleMember

    .EXAMPLE
        PS C:\> Get-DbaDbRoleMember -SqlInstance localhost

        Returns all members of all database roles on the local default SQL Server instance

    .EXAMPLE
        PS C:\> Get-DbaDbRoleMember -SqlInstance localhost, sql2016

        Returns all members of all database roles on the local and sql2016 SQL Server instances

    .EXAMPLE
        PS C:\> $servers = Get-Content C:\servers.txt
        PS C:\> $servers | Get-DbaDbRoleMember

        Returns all members of all database roles for every server in C:\servers.txt

    .EXAMPLE
        PS C:\> Get-DbaDbRoleMember -SqlInstance localhost -Database msdb

        Returns non-system members of all roles in the msdb database on localhost.

    .EXAMPLE
        PS C:\> Get-DbaDbRoleMember -SqlInstance localhost -Database msdb -IncludeSystemUser -ExcludeFixedRole

        Returns all members of non-fixed roles in the msdb database on localhost.

    .EXAMPLE
        PS C:\> Get-DbaDbRoleMember -SqlInstance localhost -Database msdb -Role 'db_owner'

        Returns all members of the db_owner role in the msdb database on localhost.

    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstance[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [string[]]$Database,
        [string[]]$ExcludeDatabase,
        [string[]]$Role,
        [string[]]$ExcludeRole,
        [switch]$ExcludeFixedRole,
        [switch]$IncludeSystemUser,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            Write-Message -Level Verbose -Message "Attempting to connect to $instance"

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message 'Failure' -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $databases = $server.Databases | Where-Object { $_.IsAccessible -eq $true }

            if (Test-Bound -Parameter 'Database') {
                $databases = $databases | Where-Object { $_.Name -in $Database }
            }

            if (Test-Bound -Parameter 'ExcludeDatabase') {
                $databases = $databases | Where-Object { $_.Name -notin $ExcludeDatabase}
            }

            foreach ($db in $databases) {
                Write-Message -Level 'Verbose' -Message "Getting Database Roles for $db on $instance"

                $dbRoles = $db.roles

                if (Test-Bound -Parameter 'Role') {
                    $dbRoles = $dbRoles | Where-Object { $_.Name -in $Role }
                }

                if (Test-Bound -Parameter 'ExcludeRole') {
                    $dbRoles = $dbRoles | Where-Object { $_.Name -notin $ExcludeRole }
                }

                if (Test-Bound -Parameter 'ExcludeFixedRole') {
                    $dbRoles = $dbRoles | Where-Object { $_.IsFixedRole -eq $false }
                }

                foreach ($dbRole in $dbRoles) {
                    Write-Message -Level 'Verbose' -Message "Getting Database Role Members for $dbRole in $db on $instance"

                    $members = $dbRole.EnumMembers()
                    foreach ($member in $members) {
                        $user = $db.Users | Where-Object { $_.Name -eq $member }

                        if (Test-Bound -Not -ParameterName 'IncludeSystemUser') {
                            $user = $user | Where-Object { $_.IsSystemObject -eq $false }
                        }

                        if ($user) {
                            Add-Member -Force -InputObject $user -MemberType NoteProperty -Name ComputerName -Value $server.ComputerName
                            Add-Member -Force -InputObject $user -MemberType NoteProperty -Name InstanceName -Value $server.ServiceName
                            Add-Member -Force -InputObject $user -MemberType NoteProperty -Name SqlInstance -Value $server.DomainInstanceName
                            Add-Member -Force -InputObject $user -MemberType NoteProperty -Name Database -Value $db.Name
                            Add-Member -Force -InputObject $user -MemberType NoteProperty -Name Role -Value $dbRole.Name
                            Add-Member -Force -InputObject $user -MemberType NoteProperty -Name UserName -Value $user.Name

                            # Select object because Select-DefaultView causes strange behaviors when assigned to a variable (??)
                            Select-Object -InputObject $user -Property 'ComputerName', 'InstanceName', 'SqlInstance', 'Database', 'Role', 'UserName', 'Login', 'IsSystemObject'
                        }
                    }
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias Get-DbaRoleMember
    }
}

tools\dbatools\functions\Get-DbaAgentJobCategory.ps1

function Get-DbaAgentJobCategory {
    <#
    .SYNOPSIS
        Get-DbaAgentJobCategory retrieves the job categories.

    .DESCRIPTION
        Get-DbaAgentJobCategory makes it possible to retrieve the job categories.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Category
        The name of the category to filter out. If no category is used all categories will be returned.

    .PARAMETER CategoryType
        The type of category. This can be "LocalJob", "MultiServerJob" or "None".
        If no category is used all categories types will be returned.

    .PARAMETER Force
        The force parameter will ignore some errors in the parameters and assume defaults.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Agent, Job, JobCategory
        Author: Sander Stad (@sqlstad), sqlstad.nl

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaAgentJobCategory

    .EXAMPLE
        PS C:\> Get-DbaAgentJobCategory -SqlInstance sql1

        Return all the job categories.

    .EXAMPLE
        PS C:\> Get-DbaAgentJobCategory -SqlInstance sql1 -Category 'Log Shipping'

        Return all the job categories that have the name 'Log Shipping'.

    .EXAMPLE
        PS C:\> Get-DbaAgentJobCategory -SqlInstance sstad-pc -CategoryType MultiServerJob

        Return all the job categories that have a type MultiServerJob.

    #>
    [CmdletBinding(DefaultParameterSetName = "Default")]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstance[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [ValidateNotNullOrEmpty()]
        [string[]]$Category,
        [ValidateSet("LocalJob", "MultiServerJob", "None")]
        [string]$CategoryType,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {

        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            # get all the job categories
            $jobCategories = $server.JobServer.JobCategories |
                Where-Object {
                ($_.Name -in $Category -or !$Category) -and
                ($_.CategoryType -in $CategoryType -or !$CategoryType)
            }

            # Set the default output
            $defaults = 'ComputerName', 'InstanceName', 'SqlInstance', 'Name', 'ID', 'CategoryType', 'JobCount'

            # Loop through each of the categories
            try {
                foreach ($cat in $jobCategories) {

                    # Get the jobs associated with the category
                    $jobCount = ($server.JobServer.Jobs | Where-Object {$_.CategoryID -eq $cat.ID}).Count

                    # Add new properties to the category object
                    Add-Member -Force -InputObject $cat -MemberType NoteProperty -Name ComputerName -value $server.ComputerName
                    Add-Member -Force -InputObject $cat -MemberType NoteProperty -Name InstanceName -value $server.ServiceName
                    Add-Member -Force -InputObject $cat -MemberType NoteProperty -Name SqlInstance -value $server.DomainInstanceName
                    Add-Member -Force -InputObject $cat -MemberType NoteProperty -Name JobCount -Value $jobCount

                    # Show the result
                    Select-DefaultView -InputObject $cat -Property $defaults
                }
            } catch {
                Stop-Function -ErrorRecord $_ -Target $instance -Message "Failure. Collection may have been modified" -Continue
            }

        } # for each instance

    } # end process

    end {
        if (Test-FunctionInterrupt) { return }
        Write-Message -Message "Finished retrieving job category." -Level Verbose
    }

}

tools\dbatools\functions\Get-DbaDbSnapshot.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaDbSnapshot {
    <#
    .SYNOPSIS
        Get database snapshots with details

    .DESCRIPTION
        Retrieves the list of database snapshot available, along with their base (the db they are the snapshot of) and creation time

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Credential object used to connect to the SQL Server as a different user

    .PARAMETER Database
        Return information for only specific databases

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto-populated from the server

    .PARAMETER Snapshot
        Return information for only specific snapshots

    .PARAMETER ExcludeSnapshot
        The snapshot(s) to exclude - this list is auto-populated from the server

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Snapshot
        Author: Simone Bizzotto (@niphlod)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaDbSnapshot

    .EXAMPLE
        PS C:\> Get-DbaDbSnapshot -SqlInstance sqlserver2014a

        Returns a custom object displaying Server, Database, DatabaseCreated, SnapshotOf, SizeMB, DatabaseCreated

    .EXAMPLE
        PS C:\> Get-DbaDbSnapshot -SqlInstance sqlserver2014a -Database HR, Accounting

        Returns information for database snapshots having HR and Accounting as base dbs

    .EXAMPLE
        PS C:\> Get-DbaDbSnapshot -SqlInstance sqlserver2014a -Snapshot HR_snapshot, Accounting_snapshot

        Returns information for database snapshots HR_snapshot and Accounting_snapshot

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [object[]]$Snapshot,
        [object[]]$ExcludeSnapshot,
        [Alias('Silent')]
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }
            $dbs = $server.Databases | Where-Object DatabaseSnapshotBaseName
            if ($Database) {
                $dbs = $dbs | Where-Object { $Database -contains $_.DatabaseSnapshotBaseName }
            }
            if ($ExcludeDatabase) {
                $dbs = $dbs | Where-Object { $ExcludeDatabase -notcontains $_.DatabaseSnapshotBaseName }
            }
            if ($Snapshot) {
                $dbs = $dbs | Where-Object { $Snapshot -contains $_.Name }
            }
            if (!$Snapshot -and !$Database) {
                $dbs = $dbs | Where-Object IsDatabaseSnapshot -eq $true | Sort-Object DatabaseSnapshotBaseName, Name
            }
            if ($ExcludeSnapshot) {
                $dbs = $dbs | Where-Object { $ExcludeSnapshot -notcontains $_.Name }
            }
            foreach ($db in $dbs) {
                try {
                    $BytesOnDisk = $db.Query("SELECT SUM(BytesOnDisk) AS BytesOnDisk FROM fn_virtualfilestats(DB_ID(),NULL) S JOIN sys.databases D on D.database_id = S.dbid", $db.Name)
                    Add-Member -Force -InputObject $db -MemberType NoteProperty -Name ComputerName -value $server.ComputerName
                    Add-Member -Force -InputObject $db -MemberType NoteProperty -Name InstanceName -value $server.ServiceName
                    Add-Member -Force -InputObject $db -MemberType NoteProperty -Name SqlInstance -value $server.DomainInstanceName
                    Add-Member -Force -InputObject $db -MemberType NoteProperty -Name DiskUsage -value ([dbasize]($BytesOnDisk.BytesOnDisk))
                    Select-DefaultView -InputObject $db -Property ComputerName, InstanceName, SqlInstance, Name, 'DatabaseSnapshotBaseName as SnapshotOf', CreateDate, DiskUsage
                } catch {
                    Stop-Function -Message "Failure" -ErrorRecord $_ -Target $db -Continue
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias Get-DbaDatabaseSnapshot
    }
}

tools\dbatools\functions\Get-DbaDbSpace.ps1

function Get-DbaDbSpace {
    <#
    .SYNOPSIS
        Returns database file space information for database files on a SQL instance.

    .DESCRIPTION
        This function returns database file space information for a SQL Instance or group of SQL Instances. Information is based on a query against sys.database_files and the FILEPROPERTY function to query and return information.

        File free space script borrowed and modified from Glenn Berry's DMV scripts (http://www.sqlskills.com/blogs/glenn/category/dmv-queries/)

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        Specifies the database(s) to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        Specifies the database(s) to exclude from processing. Options for this list are auto-populated from the server.

    .PARAMETER IncludeSystemDBs
        If this switch is enabled, system databases will be processed. By default, only user databases are processed.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Database, Space, Storage
        Author: Michael Fal (@Mike_Fal), http://mikefal.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaDbSpace

    .EXAMPLE
        PS C:\> Get-DbaDbSpace -SqlInstance localhost

        Returns all user database files and free space information for the localhost.

    .EXAMPLE
        PS C:\> Get-DbaDbSpace -SqlInstance localhost | Where-Object {$_.PercentUsed -gt 80}

        Returns all user database files and free space information for the local host. Filters the output object by any files that have a percent used of greater than 80%.

    .EXAMPLE
        PS C:\> 'localhost','localhost\namedinstance' | Get-DbaDbSpace

        Returns all user database files and free space information for the localhost and localhost\namedinstance SQL Server instances. Processes data via the pipeline.

    .EXAMPLE
        PS C:\> Get-DbaDbSpace -SqlInstance localhost -Database db1, db2 | Where-Object { $_.SpaceUntilMaxSize.Megabyte -lt 1 }

        Returns database files and free space information for the db1 and db2 on localhost where there is only 1MB left until the space is maxed out

    .EXAMPLE
        PS C:\> Get-DbaDbSpace -SqlInstance localhost -Database db1, db2 | Where-Object { $_.SpaceUntilMaxSize.Gigabyte -lt 1 }

        Returns database files and free space information for the db1 and db2 on localhost where there is only 1GB left until the space is maxed out

    #>
    [CmdletBinding()]
    param ([parameter(ValueFromPipeline, Mandatory)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [System.Management.Automation.PSCredential]$SqlCredential,
        [Alias("Databases")]
        [string[]]$Database,
        [string[]]$ExcludeDatabase,
        [switch]$IncludeSystemDBs,
        [switch]$EnableException
    )

    begin {
        Write-Message -Level System -Message "Bound parameters: $($PSBoundParameters.Keys -join ", ")."

        $sql = "SELECT SERVERPROPERTY('MachineName') AS ComputerName,
                                   ISNULL(SERVERPROPERTY('InstanceName'), 'MSSQLSERVER') AS InstanceName,
                                   SERVERPROPERTY('ServerName') AS SqlInstance,
                    DB_NAME() as DBName
                    ,f.name AS [FileName]
                    ,fg.name AS [Filegroup]
                    ,f.physical_name AS [PhysicalName]
                    ,f.type_desc AS [FileType]
                    ,CAST(CAST(FILEPROPERTY(f.name, 'SpaceUsed') AS int)/128.0 AS FLOAT) as [UsedSpaceMB]
                    ,CAST(f.size/128.0 - CAST(FILEPROPERTY(f.name, 'SpaceUsed') AS int)/128.0 AS FLOAT) AS [FreeSpaceMB]
                    ,CAST((f.size/128.0) AS FLOAT) AS [FileSizeMB]
                    ,CAST((FILEPROPERTY(f.name, 'SpaceUsed')/(f.size/1.0)) * 100 as FLOAT) as [PercentUsed]
                    ,CAST((f.growth/128.0) AS FLOAT) AS [GrowthMB]
                    ,CASE is_percent_growth WHEN 1 THEN 'pct' WHEN 0 THEN 'MB' ELSE 'Unknown' END AS [GrowthType]
                    ,CASE f.max_size WHEN -1 THEN 2147483648. ELSE CAST((f.max_size/128.0) AS FLOAT) END AS [MaxSizeMB]
                    ,CAST((f.size/128.0) AS FLOAT) - CAST(CAST(FILEPROPERTY(f.name, 'SpaceUsed') AS int)/128.0 AS FLOAT) AS [SpaceBeforeAutoGrow]
                    ,CASE f.max_size	WHEN (-1)
                                        THEN CAST(((2147483648.) - CAST(FILEPROPERTY(f.name, 'SpaceUsed') AS int))/128.0 AS FLOAT)
                                        ELSE CAST((f.max_size - CAST(FILEPROPERTY(f.name, 'SpaceUsed') AS int))/128.0 AS FLOAT)
                                        END AS [SpaceBeforeMax]
                    ,CASE f.growth	WHEN 0 THEN 0.00
                                    ELSE	CASE f.is_percent_growth	WHEN 0
                                                    THEN	CASE f.max_size
                                                            WHEN (-1)
                                                            THEN CAST(((((2147483648.)-f.Size)/f.Growth)*f.Growth)/128.0 AS FLOAT)
                                                            ELSE CAST((((f.max_size-f.Size)/f.Growth)*f.Growth)/128.0 AS FLOAT)
                                                            END
                                                    WHEN 1
                                                    THEN	CASE f.max_size
                                                            WHEN (-1)
                                                            THEN CAST(CONVERT([int],f.Size*power((1)+CONVERT([float],f.Growth)/(100),CONVERT([int],log10(CONVERT([float],(2147483648.))/CONVERT([float],f.Size))/log10((1)+CONVERT([float],f.Growth)/(100)))))/128.0 AS FLOAT)
                                                            ELSE CAST(CONVERT([int],f.Size*power((1)+CONVERT([float],f.Growth)/(100),CONVERT([int],log10(CONVERT([float],f.Max_Size)/CONVERT([float],f.Size))/log10((1)+CONVERT([float],f.Growth)/(100)))))/128.0 AS FLOAT)
                                                            END
                                                    ELSE (0)
                                                    END
                                    END AS [PossibleAutoGrowthMB]
                    , CASE f.max_size	WHEN -1 THEN 0
                                        ELSE CASE f.growth
                                                WHEN 0 THEN (f.max_size - f.size)/128
                                                ELSE	CASE f.is_percent_growth
                                                        WHEN 0
                                                        THEN CAST((f.max_size - f.size - (	CONVERT(FLOAT,FLOOR((f.max_size-f.Size)/f.Growth)*f.Growth)))/128.0 AS FLOAT)
                                                        ELSE CAST((f.max_size - f.size - (	CONVERT([int],f.Size*power((1)+CONVERT([float],f.Growth)/(100),CONVERT([int],log10(CONVERT([float],f.Max_Size)/CONVERT([float],f.Size))/log10((1)+CONVERT([float],f.Growth)/(100)))))))/128.0 AS FLOAT)
                                                        END
                                                END
                                    END AS [UnusableSpaceMB]

                FROM sys.database_files AS f WITH (NOLOCK)
                LEFT OUTER JOIN sys.filegroups AS fg WITH (NOLOCK)
                ON f.data_space_id = fg.data_space_id"
    }

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failed to process Instance $Instance." -ErrorRecord $_ -Target $instance -Continue
            }

            if ($server.VersionMajor -lt 9) {
                Write-Message -Level Warning -Message "SQL Server 2000 not supported. $server skipped."
                continue
            }

            #If IncludeSystemDBs is true, include systemdbs
            #look at all databases, online/offline/accessible/inaccessible and tell user if a db can't be queried.
            try {
                if (Test-Bound "Database") {
                    $dbs = $server.Databases | Where-Object Name -In $Database
                } elseif ($IncludeSystemDBs) {
                    $dbs = $server.Databases | Where-Object IsAccessible
                } else {
                    $dbs = $server.Databases | Where-Object { $_.IsAccessible -and $_.IsSystemObject -eq 0 }
                }

                if (Test-Bound "ExcludeDatabase") {
                    $dbs = $dbs | Where-Object Name -NotIn $ExcludeDatabase
                }
            } catch {
                Stop-Function -Message "Unable to gather databases for $instance." -ErrorRecord $_ -Continue
            }

            foreach ($db in $dbs) {
                try {
                    Write-Message -Level Verbose -Message "Querying $instance - $db."
                    If ($db.status -ne 'Normal' -or $db.IsAccessible -eq $false) {
                        Write-Message -Level Warning -Message "$db is not accessible." -Target $db
                        continue
                    }
                    #Execute query against individual database and add to output
                    foreach ($row in ($db.ExecuteWithResults($sql)).Tables.Rows) {
                        if ($row.UsedSpaceMB -is [System.DBNull]) {
                            $UsedMB = 0
                        } else {
                            $UsedMB = [Math]::Round($row.UsedSpaceMB)
                        }
                        if ($row.FreeSpaceMB -is [System.DBNull]) {
                            $FreeMB = 0
                        } else {
                            $FreeMB = [Math]::Round($row.FreeSpaceMB)
                        }
                        if ($row.PercentUsed -is [System.DBNull]) {
                            $PercentUsed = 0
                        } else {
                            $PercentUsed = [Math]::Round($row.PercentUsed)
                        }
                        if ($row.SpaceBeforeMax -is [System.DBNull]) {
                            $SpaceUntilMax = 0
                        } else {
                            $SpaceUntilMax = [Math]::Round($row.SpaceBeforeMax)
                        }
                        if ($row.UnusableSpaceMB -is [System.DBNull]) {
                            $UnusableSpace = 0
                        } else {
                            $UnusableSpace = [Math]::Round($row.UnusableSpaceMB)
                        }

                        [pscustomobject]@{
                            ComputerName       = $server.ComputerName
                            InstanceName       = $server.ServiceName
                            SqlInstance        = $server.DomainInstanceName
                            Database           = $row.DBName
                            FileName           = $row.FileName
                            FileGroup          = $row.FileGroup
                            PhysicalName       = $row.PhysicalName
                            FileType           = $row.FileType
                            UsedSpace          = [dbasize]($UsedMB * 1024 * 1024)
                            FreeSpace          = [dbasize]($FreeMB * 1024 * 1024)
                            FileSize           = [dbasize]($row.FileSizeMB * 1024 * 1024)
                            PercentUsed        = $PercentUsed
                            AutoGrowth         = [dbasize]($row.GrowthMB * 1024 * 1024)
                            AutoGrowType       = $row.GrowthType
                            SpaceUntilMaxSize  = [dbasize]($SpaceUntilMax * 1024 * 1024)
                            AutoGrowthPossible = [dbasize]($row.PossibleAutoGrowthMB * 1024 * 1024)
                            UnusableSpace      = [dbasize]($UnusableSpace * 1024 * 1024)
                        }
                    }
                } catch {
                    Stop-Function -Message "Unable to query $instance - $db." -Target $db -ErrorRecord $_ -Continue
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias Get-DbaDatabaseFreeSpace
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias Get-DbaDatabaseSpace
    }
}

tools\dbatools\functions\Get-DbaDbState.ps1

#ValidationTags#Messaging,FlowControl,Pipeline#
function Get-DbaDbState {
    <#
    .SYNOPSIS
        Gets various options for databases, hereby called "states"

    .DESCRIPTION
        Gets some common "states" on databases:
        - "RW" options : READ_ONLY or READ_WRITE
        - "Status" options : ONLINE, OFFLINE, EMERGENCY, RESTORING
        - "Access" options : SINGLE_USER, RESTRICTED_USER, MULTI_USER

        Returns an object with SqlInstance, Database, RW, Status, Access

    .PARAMETER SqlInstance
        The target SQL Server instance or instances

    .PARAMETER SqlCredential
        Credential object used to connect to the SQL Server as a different user

    .PARAMETER Database
        The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto-populated from the server

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Database
        Author: Simone Bizzotto (@niphold)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaDbState

    .EXAMPLE
        PS C:\> Get-DbaDbState -SqlInstance sqlserver2014a

        Gets options for all databases of the sqlserver2014a instance

    .EXAMPLE
        PS C:\> Get-DbaDbState -SqlInstance sqlserver2014a -Database HR, Accounting

        Gets options for both HR and Accounting database of the sqlserver2014a instance

    .EXAMPLE
        PS C:\> Get-DbaDbState -SqlInstance sqlserver2014a -Exclude HR

        Gets options for all databases of the sqlserver2014a instance except HR

    .EXAMPLE
        PS C:\> 'sqlserver2014a', 'sqlserver2014b' | Get-DbaDbState

        Gets options for all databases of sqlserver2014a and sqlserver2014b instances

    #>
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseLiteralInitializerForHashtable", "")]
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]
        $SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {

        $DbStatesQuery = @'
SELECT
Name   = name,
Access = user_access_desc,
Status = state_desc,
RW     = CASE WHEN is_read_only = 0 THEN 'READ_WRITE' ELSE 'READ_ONLY' END
FROM sys.databases
'@

    }
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }
            $dbStates = $server.Query($DbStatesQuery)
            $dbs = $dbStates | Where-Object { @('master', 'model', 'msdb', 'tempdb', 'distribution') -notcontains $_.Name }
            if ($Database) {
                $dbs = $dbs | Where-Object Name -In $Database
            }
            if ($ExcludeDatabase) {
                $dbs = $dbs | Where-Object Name -NotIn $ExcludeDatabase
            }
            # "normal" hashtable doesn't account for case sensitivity
            $dbStatesHash = New-Object -TypeName System.Collections.Hashtable
            foreach ($db in $dbStates) {
                $dbStatesHash.Add($db.Name, [pscustomobject]@{
                        Access = $db.Access
                        Status = $db.Status
                        RW     = $db.RW
                    })
            }
            foreach ($db in $dbs) {
                $db_status = $dbStatesHash[$db.Name]
                [PSCustomObject]@{
                    SqlInstance  = $server.Name
                    InstanceName = $server.ServiceName
                    ComputerName = $server.ComputerName
                    DatabaseName = $db.Name
                    RW           = $db_status.RW
                    Status       = $db_status.Status
                    Access       = $db_status.Access
                    Database     = $server.Databases[$db.Name]
                } | Select-DefaultView -ExcludeProperty Database
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Get-DbaDatabaseState
    }
}

tools\dbatools\functions\Get-DbaDbStoredProcedure.ps1

function Get-DbaDbStoredProcedure {
    <#
    .SYNOPSIS
        Gets database Stored Procedures

    .DESCRIPTION
        Gets database Stored Procedures

    .PARAMETER SqlInstance
        The target SQL Server instance or instances

    .PARAMETER SqlCredential
        Allows you to login to SQL Server using alternative credentials

    .PARAMETER Database
        To get Stored Procedures from specific database(s)

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto populated from the server

    .PARAMETER ExcludeSystemSp
        This switch removes all system objects from the Stored Procedure collection

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Database, StoredProcedure, Proc
        Author: Klaas Vandenberghe (@PowerDbaKlaas)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Get-DbaDbStoredProcedure -SqlInstance sql2016

        Gets all database Stored Procedures

    .EXAMPLE
        PS C:\> Get-DbaDbStoredProcedure -SqlInstance Server1 -Database db1

        Gets the Stored Procedures for the db1 database

    .EXAMPLE
        PS C:\> Get-DbaDbStoredProcedure -SqlInstance Server1 -ExcludeDatabase db1

        Gets the Stored Procedures for all databases except db1

    .EXAMPLE
        PS C:\> Get-DbaDbStoredProcedure -SqlInstance Server1 -ExcludeSystemSp

        Gets the Stored Procedures for all databases that are not system objects

    .EXAMPLE
        PS C:\> 'Sql1','Sql2/sqlexpress' | Get-DbaDbStoredProcedure

        Gets the Stored Procedures for the databases on Sql1 and Sql2/sqlexpress

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [switch]$ExcludeSystemSp,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $databases = $server.Databases | Where-Object IsAccessible

            if ($Database) {
                $databases = $databases | Where-Object Name -In $Database
            }
            if ($ExcludeDatabase) {
                $databases = $databases | Where-Object Name -NotIn $ExcludeDatabase
            }

            foreach ($db in $databases) {
                if (!$db.IsAccessible) {
                    Write-Message -Level Warning -Message "Database $db is not accessible. Skipping."
                    continue
                }
                if ($db.StoredProcedures.Count -eq 0) {
                    Write-Message -Message "No Stored Procedures exist in the $db database on $instance" -Target $db -Level Output
                    continue
                }

                foreach ($proc in $db.StoredProcedures) {
                    if ( (Test-Bound -ParameterName ExcludeSystemSp) -and $proc.IsSystemObject ) {
                        continue
                    }

                    Add-Member -Force -InputObject $proc -MemberType NoteProperty -Name ComputerName -value $server.ComputerName
                    Add-Member -Force -InputObject $proc -MemberType NoteProperty -Name InstanceName -value $server.ServiceName
                    Add-Member -Force -InputObject $proc -MemberType NoteProperty -Name SqlInstance -value $server.DomainInstanceName
                    Add-Member -Force -InputObject $proc -MemberType NoteProperty -Name Database -value $db.Name

                    $defaults = 'ComputerName', 'InstanceName', 'SqlInstance', 'Database', 'Schema', 'ID as ObjectId', 'CreateDate',
                    'DateLastModified', 'Name', 'ImplementationType', 'Startup'
                    Select-DefaultView -InputObject $proc -Property $defaults
                }
            }
        }
    }
}

tools\dbatools\functions\Get-DbaDbTable.ps1

function Get-DbaDbTable {
    <#
    .SYNOPSIS
        Returns a summary of information on the tables

    .DESCRIPTION
        Shows table information around table row and data sizes and if it has any table type information.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto-populated from the server

    .PARAMETER IncludeSystemDBs
        Switch parameter that when used will display system database information

    .PARAMETER Table
        Define a specific table you would like to query. You can specify up to three-part name like db.sch.tbl.

        If the object has special characters please wrap them in square brackets [ ].
        Using dbo.First.Table will try to find table named 'Table' on schema 'First' and database 'dbo'.
        The correct way to find table named 'First.Table' on schema 'dbo' is by passing dbo.[First.Table]
        Any actual usage of the ] must be escaped by duplicating the ] character.
        The correct way to find a table Name] in schema Schema.Name is by passing [Schema.Name].[Name]]]

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Database, Tables
        Author: Stephen Bennett, https://sqlnotesfromtheunderground.wordpress.com/

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaDbTable

    .EXAMPLE
        PS C:\> Get-DbaDbTable -SqlInstance DEV01 -Database Test1

        Return all tables in the Test1 database

    .EXAMPLE
        PS C:\> Get-DbaDbTable -SqlInstance DEV01 -Database MyDB -Table MyTable

        Return only information on the table MyTable from the database MyDB

    .EXAMPLE
        PS C:\> Get-DbaDbTable -SqlInstance DEV01 -Table MyTable

        Returns information on table called MyTable if it exists in any database on the server, under any schema

    .EXAMPLE
        PS C:\> Get-DbaDbTable -SqlInstance DEV01 -Table dbo.[First.Table]

        Returns information on table called First.Table on schema dbo if it exists in any database on the server

    .EXAMPLE
        PS C:\> 'localhost','localhost\namedinstance' | Get-DbaDbTable -Database DBA -Table Commandlog

        Returns information on the CommandLog table in the DBA database on both instances localhost and the named instance localhost\namedinstance

    .EXAMPLE
        PS C:\> Get-DbaDbTable -SqlInstance DEV01 -Table "[[DbName]]].[Schema.With.Dots].[`"[Process]]`"]" -Verbose

        For the instance Dev01 Returns information for a table named: "[Process]" in schema named: Schema.With.Dots in database named: [DbName]
        The Table name, Schema name and Database name must be wrapped in square brackets [ ]
        Special charcters like " must be escaped by a ` charcter.
        In addition any actual instance of the ] character must be escaped by being duplicated.
       #>
    [CmdletBinding()]
    param ([parameter(ValueFromPipeline, Mandatory)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [switch]$IncludeSystemDBs,
        [string[]]$Table,
        [switch][Alias('Silent')]
        $EnableException
    )

    begin {
        if ($Table) {
            $fqtns = @()
            foreach ($t in $Table) {
                $fqtn = Get-TableNameParts -Table $t

                if (!$fqtn.Parsed) {
                    Write-Message -Level Warning -Message "Please check you are using proper three-part names. If your search value contains special characters you must use [ ] to wrap the name. The value $t could not be parsed as a valid name."
                    Continue
                }

                $fqtns += [PSCustomObject] @{
                    Database   = $fqtn.Database
                    Schema     = $fqtn.Schema
                    Table      = $fqtn.Table
                    InputValue = $fqtn.InputValue
                }
            }
            if (!$fqtns) {
                Stop-Function -Message "No Valid Table specified"  -ErrorRecord $_ -Target $instance -Continue
            }
        }
    }

    process {
        foreach ($instance in $sqlinstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            try {
                #only look at online databases (Status equal normal)
                $dbs = $server.Databases | Where-Object IsAccessible

                #If IncludeSystemDBs is false, exclude systemdbs
                if (!$IncludeSystemDBs -and !$Database) {
                    $dbs = $dbs | Where-Object { !$_.IsSystemObject }
                }

                if ($Database) {
                    $dbs = $dbs | Where-Object { $Database -contains $_.Name }
                }

                if ($ExcludeDatabase) {
                    $dbs = $dbs | Where-Object { $ExcludeDatabase -notcontains $_.Name }
                }
            } catch {
                Stop-Function -Message "Unable to gather dbs for $instance" -Target $instance -Continue -ErrorRecord $_
            }

            foreach ($db in $dbs) {
                Write-Message -Level Verbose -Message "Processing $db"

                if ($fqtns) {
                    $tables = @()
                    foreach ($fqtn in $fqtns) {
                        # If the user specified a database in a three-part name, and it's not the
                        # database currently being processed, skip this table.
                        if ($fqtn.Database) {
                            if ($fqtn.Database -ne $db.Name) {
                                continue
                            }
                        }

                        $tbl = $db.tables | Where-Object { $_.Name -in $fqtn.Table -and $fqtn.Schema -in ($_.Schema, $null) -and $fqtn.Database -in ($_.Parent.Name, $null) }

                        if (-not $tbl) {
                            Write-Message -Level Verbose -Message "Could not find table $($fqtn.Table) in $db on $server"
                        }
                        $tables += $tbl
                    }
                } else {
                    $tables = $db.Tables
                }

                foreach ($sqltable in $tables) {
                    $sqltable | Add-Member -Force -MemberType NoteProperty -Name ComputerName -Value $server.ComputerName
                    $sqltable | Add-Member -Force -MemberType NoteProperty -Name InstanceName -Value $server.ServiceName
                    $sqltable | Add-Member -Force -MemberType NoteProperty -Name SqlInstance -Value $server.DomainInstanceName
                    $sqltable | Add-Member -Force -MemberType NoteProperty -Name Database -Value $db.Name

                    $defaultprops = "ComputerName", "InstanceName", "SqlInstance", "Database", "Schema", "Name", "IndexSpaceUsed", "DataSpaceUsed", "RowCount", "HasClusteredIndex", "IsFileTable", "IsMemoryOptimized", "IsPartitioned", "FullTextIndex", "ChangeTrackingEnabled"

                    Select-DefaultView -InputObject $sqltable -Property $defaultprops
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Get-DbaTable
    }
}

tools\dbatools\functions\Get-DbaAgentServer.ps1

function Get-DbaAgentServer {
    <#
    .SYNOPSIS
        Gets SQL Agent Server information for each instance(s) of SQL Server.

    .DESCRIPTION
        The Get-DbaAgentServer returns connected SMO object for SQL Agent Server information for each instance(s) of SQL Server.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Job, Agent
        Author: Cláudio Silva (@claudioessilva), https://claudioessilva.eu

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaAgentServer

    .EXAMPLE
        PS C:\> Get-DbaAgentServer -SqlInstance localhost

        Returns SQL Agent Server on the local default SQL Server instance

    .EXAMPLE
        PS C:\> Get-DbaAgentServer -SqlInstance localhost, sql2016

        Returns SQL Agent Servers for the localhost and sql2016 SQL Server instances

    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $jobServer = $server.JobServer

            $defaultView = 'ComputerName', 'InstanceName', 'SqlInstance', 'AgentDomainGroup', 'AgentLogLevel', 'AgentMailType', 'AgentShutdownWaitTime', 'ErrorLogFile', 'IdleCpuDuration', 'IdleCpuPercentage', 'IsCpuPollingEnabled', 'JobServerType', 'LoginTimeout', 'JobHistoryIsEnabled', 'MaximumHistoryRows', 'MaximumJobHistoryRows', 'MsxAccountCredentialName', 'MsxAccountName', 'MsxServerName', 'Name', 'NetSendRecipient', 'ServiceAccount', 'ServiceStartMode', 'SqlAgentAutoStart', 'SqlAgentMailProfile', 'SqlAgentRestart', 'SqlServerRestart', 'State', 'SysAdminOnly'

            Add-Member -Force -InputObject $jobServer -MemberType NoteProperty -Name ComputerName -Value $jobServer.Parent.ComputerName
            Add-Member -Force -InputObject $jobServer -MemberType NoteProperty -Name InstanceName -value $jobServer.Parent.ServiceName
            Add-Member -Force -InputObject $jobServer -MemberType NoteProperty -Name SqlInstance -Value $jobServer.Parent.DomainInstanceName
            Add-Member -Force -InputObject $jobServer -MemberType ScriptProperty -Name JobHistoryIsEnabled -Value { switch ( $jobServer.MaximumHistoryRows ) { -1 { $false } default { $true } } }

            Select-DefaultView -InputObject $jobServer -Property $defaultView
        }
    }
}

tools\dbatools\functions\Get-DbaAgHadr.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaAgHadr {
    <#
    .SYNOPSIS
        Gets the Hadr service setting on the specified SQL Server instance.

    .DESCRIPTION
        Gets the Hadr setting, from the service level, and returns true or false for the specified SQL Server instance.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Hadr, HA, AG, AvailabilityGroup
        Author: Shawn Melton (@wsmelton), http://wsmelton.github.io

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaAgHadr

    .EXAMPLE
        PS C:\> Get-DbaAgHadr -SqlInstance sql2016

        Returns a status of the Hadr setting for sql2016 SQL Server instance.

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            Add-Member -Force -InputObject $server -MemberType NoteProperty -Name ComputerName -value $server.ComputerName
            Add-Member -Force -InputObject $server -MemberType NoteProperty -Name InstanceName -value $server.ServiceName
            Add-Member -Force -InputObject $server -MemberType NoteProperty -Name SqlInstance -value $server.DomainInstanceName

            Select-DefaultView -InputObject $server -Property 'ComputerName', 'InstanceName', 'SqlInstance', 'IsHadrEnabled'
        }
    }
}

tools\dbatools\functions\Get-DbaAgListener.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaAgListener {
    <#
    .SYNOPSIS
        Returns availability group listeners.

    .DESCRIPTION
        Returns availability group listeners.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. Server version must be SQL Server version 2012 or higher.

    .PARAMETER SqlCredential
        Login to the SqlInstance instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER AvailabilityGroup
        Specify the availability groups to query.

    .PARAMETER Listener
        Return only specific listeners.

    .PARAMETER InputObject
        Enables piped input from Get-DbaAvailabilityGroup.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: AG, HA, AvailabilityGroup, Listener
        Author: Viorel Ciucu (@viorelciucu)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaAgListener

    .EXAMPLE
        PS C:\> Get-DbaAgListener -SqlInstance sql2017a

        Returns all listeners found on sql2017a

    .EXAMPLE
        PS C:\> Get-DbaAgListener -SqlInstance sql2017a -AvailabilityGroup AG-a

        Returns all listeners found on sql2017a on sql2017a for the availability group AG-a


    .EXAMPLE
        PS C:\> Get-DbaAvailabilityGroup -SqlInstance sql2017a -AvailabilityGroup OPP | Get-DbaAgListener

        Returns all listeners found on sql2017a on sql2017a for the availability group OPP

    #>
    [CmdletBinding()]
    param (
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$AvailabilityGroup,
        [string[]]$Listener,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.AvailabilityGroup[]]$InputObject,
        [switch]$EnableException
    )
    process {
        if ($SqlInstance) {
            $InputObject += Get-DbaAvailabilityGroup -SqlInstance $SqlInstance -SqlCredential $SqlCredential -AvailabilityGroup $AvailabilityGroup
        }

        if (Test-Bound -ParameterName Listener) {
            $InputObject = $InputObject | Where-Object { $_.AvailabilityGroupListeners.Name -contains $Listener }
        }

        $defaults = 'ComputerName', 'InstanceName', 'SqlInstance', 'AvailabilityGroup', 'Name', 'PortNumber', 'ClusterIPConfiguration'

        foreach ($aglistener in $InputObject.AvailabilityGroupListeners) {
            $server = $aglistener.Parent.Parent
            Add-Member -Force -InputObject $aglistener -MemberType NoteProperty -Name ComputerName -value $server.ComputerName
            Add-Member -Force -InputObject $aglistener -MemberType NoteProperty -Name InstanceName -value $server.ServiceName
            Add-Member -Force -InputObject $aglistener -MemberType NoteProperty -Name SqlInstance -value $server.DomainInstanceName
            Add-Member -Force -InputObject $aglistener -MemberType NoteProperty -Name AvailabilityGroup -value $aglistener.Parent.Name
            Select-DefaultView -InputObject $aglistener -Property $defaults
        }
    }
}

tools\dbatools\functions\Get-DbaAvailabilityGroup.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaAvailabilityGroup {
    <#
    .SYNOPSIS
        Returns availability group objects from a SQL Server instance.

    .DESCRIPTION
        Returns availability group objects from a SQL Server instance.

        Default view provides most common set of properties for information on the Availability Group(s).

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2012 or higher.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER AvailabilityGroup
        Return only specific availability groups.

    .PARAMETER IsPrimary
        If this switch is enabled, a boolean indicating whether SqlInstance is the Primary replica in the AG is returned.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Hadr, HA, AG, AvailabilityGroup
        Author: Shawn Melton (@wsmelton) | Chrissy LeMaire (@cl)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaAvailabilityGroup

    .EXAMPLE
        PS C:\> Get-DbaAvailabilityGroup -SqlInstance sqlserver2014a

        Returns basic information on all the Availability Group(s) found on sqlserver2014a.

    .EXAMPLE
        PS C:\> Get-DbaAvailabilityGroup -SqlInstance sqlserver2014a -AvailabilityGroup AG-a

        Shows basic information on the Availability Group AG-a on sqlserver2014a.

    .EXAMPLE
        PS C:\> Get-DbaAvailabilityGroup -SqlInstance sqlserver2014a | Select *

        Returns full object properties on all Availability Group(s) on sqlserver2014a.

    .EXAMPLE
        PS C:\> Get-DbaAvailabilityGroup -SqlInstance sqlserver2014a | Select-Object -ExpandProperty PrimaryReplicaServerName

        Returns the SQL Server instancename of the primary replica as a string

    .EXAMPLE
        PS C:\> Get-DbaAvailabilityGroup -SqlInstance sqlserver2014a -AvailabilityGroup AG-a -IsPrimary

        Returns true/false if the server, sqlserver2014a, is the primary replica for AG-a Availability Group.

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$AvailabilityGroup,
        [switch]$IsPrimary,
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 11
            } catch {
                Stop-Function -Message "Failure." -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            if (-not $server.IsHadrEnabled) {
                Stop-Function -Message "Availability Group (HADR) is not configured for the instance: $instance." -Target $instance -Continue
            }

            $ags = $server.AvailabilityGroups

            if ($AvailabilityGroup) {
                $ags = $ags | Where-Object Name -in $AvailabilityGroup
            }

            foreach ($ag in $ags) {
                Add-Member -Force -InputObject $ag -MemberType NoteProperty -Name ComputerName -value $server.ComputerName
                Add-Member -Force -InputObject $ag -MemberType NoteProperty -Name InstanceName -value $server.ServiceName
                Add-Member -Force -InputObject $ag -MemberType NoteProperty -Name SqlInstance -value $server.DomainInstanceName

                if ($IsPrimary) {
                    $defaults = 'ComputerName', 'InstanceName', 'SqlInstance', 'Name as AvailabilityGroup', 'IsPrimary'
                    Add-Member -Force -InputObject $ag -MemberType NoteProperty -Name IsPrimary -Value ($ag.PrimaryReplicaServerName -eq $server.Name)
                    Select-DefaultView -InputObject $ag -Property $defaults
                } else {
                    $defaults = 'ComputerName', 'InstanceName', 'SqlInstance', 'LocalReplicaRole', 'Name as AvailabilityGroup', 'PrimaryReplicaServerName as PrimaryReplica', 'ClusterType', 'DtcSupportEnabled', 'AutomatedBackupPreference', 'AvailabilityReplicas', 'AvailabilityDatabases', 'AvailabilityGroupListeners'
                    Select-DefaultView -InputObject $ag -Property $defaults
                }
            }
        }
    }
}

tools\dbatools\functions\Get-DbaCmConnection.ps1

function Get-DbaCmConnection {
    <#
    .SYNOPSIS
        Retrieves windows management connections from the cache

    .DESCRIPTION
        Retrieves windows management connections from the cache

    .PARAMETER ComputerName
        The computername to ComputerName for.

    .PARAMETER UserName
        Username on credentials to look for. Will not find connections using the default windows credentials.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: ComputerManagement, CIM
        Author: Friedrich Weinmann (@FredWeinmann)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaCmConnection

    .EXAMPLE
        PS C:\> Get-DbaCmConnection

        List all cached connections.

    .EXAMPLE
        PS C:\> Get-DbaCmConnection sql2014

        List the cached connection - if any - to the server sql2014.

    .EXAMPLE
        PS C:\> Get-DbaCmConnection -UserName "*charles*"

        List all cached connection that use a username containing "charles" as default or override credentials.

    #>
    [CmdletBinding()]
    param
    (
        [Parameter(Position = 0, ValueFromPipeline)]
        [Alias('Filter')]
        [String[]]
        $ComputerName = "*",

        [String]
        $UserName = "*",

        [switch]
        [Alias('Silent')]$EnableException
    )

    begin {
        Write-Message -Level InternalComment -Message "Starting"
        Write-Message -Level Verbose -Message "Bound parameters: $($PSBoundParameters.Keys -join ", ")"
    }
    process {
        foreach ($name in $ComputerName) {
            Write-Message -Level VeryVerbose -Message "Processing search. ComputerName: '$name' | Username: '$UserName'"
            ([Sqlcollaborative.Dbatools.Connection.ConnectionHost]::Connections.Values | Where-Object { ($_.ComputerName -like $name) -and ($_.Credentials.UserName -like $UserName) })
        }
    }
    end {
        Write-Message -Level InternalComment -Message "Ending"
    }
}

tools\dbatools\functions\Get-DbaCmsRegServerStore.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaCmsRegServerStore {
    <#
    .SYNOPSIS
        Returns a SQL Server Registered Server Store Object

    .DESCRIPTION
        Returns a SQL Server Registered Server Store object - useful for working with Central Management Store

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function
        to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: RegisteredServer,CMS
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaCmsRegServerStore

    .EXAMPLE
        PS C:\> Get-DbaCmsRegServerStore -SqlInstance sqlserver2014a

        Returns a SQL Server Registered Server Store Object from sqlserver2014a

    .EXAMPLE
        PS C:\> Get-DbaCmsRegServerStore -SqlInstance sqlserver2014a -SqlCredential sqladmin

        Returns a SQL Server Registered Server Store Object from sqlserver2014a  by logging in with the sqladmin login

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias('Silent')]
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            try {
                $store = New-Object Microsoft.SqlServer.Management.RegisteredServers.RegisteredServersStore($server.ConnectionContext.SqlConnectionObject)
            } catch {
                Stop-Function -Message "Cannot access Central Management Server on $instance" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            Add-Member -Force -InputObject $store -MemberType NoteProperty -Name ComputerName -value $server.ComputerName
            Add-Member -Force -InputObject $store -MemberType NoteProperty -Name InstanceName -value $server.ServiceName
            Add-Member -Force -InputObject $store -MemberType NoteProperty -Name SqlInstance -value $server.DomainInstanceName

            Select-DefaultView -InputObject $store -ExcludeProperty ServerConnection, DomainInstanceName, DomainName, Urn, Properties, Metadata, Parent, ConnectionContext, PropertyMetadataChanged, PropertyChanged
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias Get-DbaRegisteredServerStore
    }
}

tools\dbatools\functions\Get-DbaComputerCertificate.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaComputerCertificate {
    <#
    .SYNOPSIS
        Simplifies finding computer certificates that are candidates for using with SQL Server's network encryption

    .DESCRIPTION
        Gets computer certificates on localhost that are candidates for using with SQL Server's network encryption

    .PARAMETER ComputerName
       The target SQL Server instance or instances. Defaults to localhost. If target is a cluster, you must specify the distinct nodes.

    .PARAMETER Credential
        Allows you to login to $ComputerName using alternative credentials.

    .PARAMETER Store
        Certificate store - defaults to LocalMachine

    .PARAMETER Folder
        Certificate folder - defaults to My (Personal)

    .PARAMETER Path
        The path to a certificate - basically changes the path into a certificate object

    .PARAMETER Thumbprint
        Return certificate based on thumbprint

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Certificate
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Get-DbaComputerCertificate

        Gets computer certificates on localhost that are candidates for using with SQL Server's network encryption

    .EXAMPLE
        PS C:\> Get-DbaComputerCertificate -ComputerName sql2016

        Gets computer certificates on sql2016 that are candidates for using with SQL Server's network encryption

    .EXAMPLE
        PS C:\> Get-DbaComputerCertificate -ComputerName sql2016 -Thumbprint 8123472E32AB412ED4288888B83811DB8F504DED, 04BFF8B3679BB01A986E097868D8D494D70A46D6

        Gets computer certificates on sql2016 that match thumbprints 8123472E32AB412ED4288888B83811DB8F504DED or 04BFF8B3679BB01A986E097868D8D494D70A46D6

    #>
    [CmdletBinding()]
    param (
        [parameter(ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "SqlInstance")]
        [DbaInstanceParameter[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [string]$Store = "LocalMachine",
        [string]$Folder = "My",
        [string]$Path,
        [string[]]$Thumbprint,
        [switch]$EnableException
    )

    begin {
        #region Scriptblock for remoting
        $scriptblock = {
            param (
                $Thumbprint,
                $Store,
                $Folder,
                $Path
            )

            if ($Path) {
                $bytes = [System.IO.File]::ReadAllBytes($path)
                $Certificate = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2
                $Certificate.Import($bytes, $null, [System.Security.Cryptography.X509Certificates.X509KeyStorageFlags]::DefaultKeySet)
                return $Certificate
            }
            
            function Get-CoreCertStore {
                [CmdletBinding()]
                param (
                    [ValidateSet("CurrentUser", "LocalMachine")]
                    [string]$Store,
                    [ValidateSet("AddressBook", "AuthRoot, CertificateAuthority", "Disallowed", "My", "Root", "TrustedPeople", "TrustedPublisher")]
                    [string]$Folder,
                    [ValidateSet("ReadOnly", "ReadWrite")]
                    [string]$Flag = "ReadOnly"
                )
                
                $storename = [System.Security.Cryptography.X509Certificates.StoreLocation]::$Store
                $foldername = [System.Security.Cryptography.X509Certificates.StoreName]::$Folder
                $flags = [System.Security.Cryptography.X509Certificates.OpenFlags]::$Flag
                $certstore = [System.Security.Cryptography.X509Certificates.X509Store]::New($foldername, $storename)
                $certstore.Open($flags)
                
                $certstore
            }
            
            function Get-CoreCertificate {
                [CmdletBinding()]
                param (
                    [ValidateSet("CurrentUser", "LocalMachine")]
                    [string]$Store,
                    [ValidateSet("AddressBook", "AuthRoot, CertificateAuthority", "Disallowed", "My", "Root", "TrustedPeople", "TrustedPublisher")]
                    [string]$Folder,
                    [ValidateSet("ReadOnly", "ReadWrite")]
                    [string]$Flag = "ReadOnly",
                    [string[]]$Thumbprint,
                    [System.Security.Cryptography.X509Certificates.X509Store[]]$InputObject
                )
                
                if (-not $InputObject) {
                    $InputObject += Get-CoreCertStore -Store $Store -Folder $Folder -Flag $Flag
                }
                
                $certs = ($InputObject).Certificates
                
                if ($Thumbprint) {
                    $certs = $certs | Where-Object Thumbprint -in $Thumbprint
                }
                
                $certs
            }
            
            if ($Thumbprint) {
                try {
                    <# DO NOT use Write-Message as this is inside of a script block #>
                    Write-Verbose "Searching Cert:\$Store\$Folder"
                    Get-CoreCertificate -Store $Store -Folder $Folder -Thumbprint $Thumbprint
                } catch {
                    # don't care - there's a weird issue with remoting where an exception gets thrown for no apparent reason
                    # here to avoid an empty catch
                    $null = 1
                }
            } else {
                try {
                    <# DO NOT use Write-Message as this is inside of a script block #>
                    Write-Verbose "Searching Cert:\$Store\$Folder"
                    Get-CoreCertificate -Store $Store -Folder $Folder | Where-Object EnhancedKeyUsageList -match '1\.3\.6\.1\.5\.5\.7\.3\.1'
                } catch {
                    # still don't care
                    # here to avoid an empty catch
                    $null = 1
                }
            }
        }
        #endregion Scriptblock for remoting
    }
    
    process {
        foreach ($computer in $computername) {
            try {
                Invoke-Command2 -ComputerName $computer -Credential $Credential -ScriptBlock $scriptblock -ArgumentList $thumbprint, $Store, $Folder, $Path -ErrorAction Stop | Select-DefaultView -Property FriendlyName, DnsNameList, Thumbprint, NotBefore, NotAfter, Subject, Issuer
            } catch {
                Stop-Function -Message "Issue connecting to computer" -ErrorRecord $_ -Target $computer -Continue
            }
        }
    }
}

tools\dbatools\functions\Get-DbaDeprecatedFeature.ps1

function Get-DbaDeprecatedFeature {
    <#
    .SYNOPSIS
        Displays information relating to deprecated features for SQL Server 2005 and above.

    .DESCRIPTION
        Displays information relating to deprecated features for SQL Server 2005 and above.

    .PARAMETER SqlInstance
        The target SQL Server instance

    .PARAMETER SqlCredential
        Login to the target instance using alternate Windows or SQL Login Authentication. Accepts credential objects (Get-Credential).

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Deprecated
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaDeprecatedFeature

    .EXAMPLE
        PS C:\> Get-DbaDeprecatedFeature -SqlInstance sql2008, sqlserver2012

        Check deprecated features for all databases on the servers sql2008 and sqlserver2012.

    .EXAMPLE
        PS C:\> Get-DbaDeprecatedFeature -SqlInstance sql2008

        Check deprecated features on server sql2008.

    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "SqlServers")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [switch]$EnableException
    )

    begin {
        $sql = "SELECT  SERVERPROPERTY('MachineName') AS ComputerName,
        ISNULL(SERVERPROPERTY('InstanceName'), 'MSSQLSERVER') AS InstanceName,
        SERVERPROPERTY('ServerName') AS SqlInstance, object_name, instance_name as DeprecatedFeature, object_name as ObjectName, instance_name as deprecated_feature, cntr_value as UsageCount
        FROM sys.dm_os_performance_counters WHERE object_name like '%Deprecated%'
        and cntr_value > 0 ORDER BY deprecated_feature"
    }

    process {
        foreach ($instance in $SqlInstance) {
            Write-Message -Level Verbose -Message "Attempting to connect to $instance"

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            try {
                $server.Query($sql) | Select-DefaultView -Property ComputerName, InstanceName, SqlInstance, ObjectName, DeprecatedFeature, UsageCount
            } catch {
                Stop-Function -Message "Failure" -ErrorRecord $_ -Target $instance -Continue
            }

        }
    }
}

tools\dbatools\functions\Get-DbaDetachedDatabaseInfo.ps1

function Get-DbaDetachedDatabaseInfo {
    <#
    .SYNOPSIS
        Get detailed information about detached SQL Server database files.

    .DESCRIPTION
        Gathers the following information from detached database files: database name, SQL Server version (compatibility level), collation, and file structure.

        "Data files" and "Log file" report the structure of the data and log files as they were when the database was detached. "Database version" is the compatibility level.

        MDF files are most easily read by using a SQL Server to interpret them. Because of this, you must specify a SQL Server and the path must be relative to the SQL Server.

    .PARAMETER SqlInstance
        Source SQL Server. This instance must be online and is required to parse the information contained with in the detached database file.

        This function will not attach the database file, it will only use SQL Server to read its contents.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Path
        Specifies the path to the MDF file to be read. This path must be readable by the SQL Server service account. Ideally, the MDF will be located on the SQL Server itself, or on a network share to which the SQL Server service account has access.

    .NOTES
        Tags: Database, Detach
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaDetachedDatabaseInfo

    .EXAMPLE
        PS C:\> Get-DbaDetachedDatabaseInfo -SqlInstance sql2016 -Path M:\Archive\mydb.mdf

        Returns information about the detached database file M:\Archive\mydb.mdf using the SQL Server instance sql2016. The M drive is relative to the SQL Server instance.

    #>

    [CmdletBinding(DefaultParameterSetName = "Default")]
    param (
        [parameter(Mandatory)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter]$SqlInstance,
        [parameter(Mandatory)]
        [Alias("Mdf")]
        [string]$Path,
        [PSCredential]$SqlCredential
    )

    begin {
        function Get-MdfFileInfo {
            $datafiles = New-Object System.Collections.Specialized.StringCollection
            $logfiles = New-Object System.Collections.Specialized.StringCollection

            $servername = $server.name
            $serviceaccount = $server.ServiceAccount

            $exists = Test-DbaPath -SqlInstance $server -Path $Path

            if ($exists -eq $false) {
                throw "$servername cannot access the file $path. Does the file exist and does the service account ($serviceaccount) have access to the path?"
            }

            try {
                $detachedDatabaseInfo = $server.DetachedDatabaseInfo($path)
                $dbname = ($detachedDatabaseInfo | Where-Object { $_.Property -eq "Database name" }).Value
                $exactdbversion = ($detachedDatabaseInfo | Where-Object { $_.Property -eq "Database version" }).Value
                $collationid = ($detachedDatabaseInfo | Where-Object { $_.Property -eq "Collation" }).Value
            } catch {
                throw "$servername cannot read the file $path. Is the database detached?"
            }

            switch ($exactdbversion) {
                852 { $dbversion = "SQL Server 2016" }
                829 { $dbversion = "SQL Server 2016 Prerelease" }
                782 { $dbversion = "SQL Server 2014" }
                706 { $dbversion = "SQL Server 2012" }
                684 { $dbversion = "SQL Server 2012 CTP1" }
                661 { $dbversion = "SQL Server 2008 R2" }
                660 { $dbversion = "SQL Server 2008 R2" }
                655 { $dbversion = "SQL Server 2008 SP2+" }
                612 { $dbversion = "SQL Server 2005" }
                611 { $dbversion = "SQL Server 2005" }
                539 { $dbversion = "SQL Server 2000" }
                515 { $dbversion = "SQL Server 7.0" }
                408 { $dbversion = "SQL Server 6.5" }
                default { $dbversion = "Unknown" }
            }

            $collationsql = "SELECT name FROM fn_helpcollations() where collationproperty(name, N'COLLATIONID')  = $collationid"

            try {
                $dataset = $server.databases['master'].ExecuteWithResults($collationsql)
                $collation = "$($dataset.Tables[0].Rows[0].Item(0))"
            } catch {
                $collation = $collationid
            }

            if ($collation.length -eq 0) { $collation = $collationid }

            try {
                foreach ($file in $server.EnumDetachedDatabaseFiles($path)) {
                    $datafiles += $file
                }

                foreach ($file in $server.EnumDetachedLogFiles($path)) {
                    $logfiles += $file
                }
            } catch {
                throw "$servername unable to enumerate database or log structure information for $path"
            }

            $mdfinfo = [pscustomobject]@{
                Name         = $dbname
                Version      = $dbversion
                ExactVersion = $exactdbversion
                Collation    = $collation
                DataFiles    = $datafiles
                LogFiles     = $logfiles
            }

            return $mdfinfo
        }
    }

    process {

        $server = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential
        $mdfinfo = Get-MdfFileInfo $server $path

    }

    end {
        $server.ConnectionContext.Disconnect()
        return $mdfinfo
    }
}

tools\dbatools\functions\Get-DbaDiskSpace.ps1

#ValidationTags#CodeStyle,Messaging,FlowControl,Pipeline#
function Get-DbaDiskSpace {
    <#
    .SYNOPSIS
        Displays disk information for all local disk on a server.

    .DESCRIPTION
        Returns a custom object with server name, name of disk, label of disk, total size, free size, percent free, block size and filesystem.

        By default, this function only shows drives of types 2 and 3 (removable disk and local disk).

        Requires Windows administrator access on SQL Servers

    .PARAMETER ComputerName
        The target computer. Defaults to localhost.

    .PARAMETER Credential
        Credential object used to connect to the computer as a different user.

    .PARAMETER Unit
        This parameter has been deprecated and will be removed in 1.0.0
        All properties previously generated through this command are present at the same time, but hidden by default.

    .PARAMETER CheckForSql
        If this switch is enabled, disks will be checked for SQL Server data and log files. Windows Authentication is always used for this.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER ExcludeDrive
        Filter out drives - format is C:\

    .PARAMETER Detailed
        Output all properties, will be deprecated in 1.0.0 release. Use Force Instead

    .PARAMETER CheckFragmentation
        If this switch is enabled, fragmentation of all filesystems will be checked.

        This will increase the runtime of the function by seconds or even minutes per volume.

    .PARAMETER Force
        Enabling this switch will cause the command to include ALL drives.
        By default, only local disks and removable disks are shown, and hidden volumes are excluded.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .NOTES
        Tags: Storage, Disk
        Author: Chrissy LeMaire (@cl), netnerds.net | Jakob Bindslet

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaDiskSpace

    .EXAMPLE
        PS C:\> Get-DbaDiskSpace -ComputerName srv0042

        Get disk space for the server srv0042.

    .EXAMPLE
        PS C:\> Get-DbaDiskSpace -ComputerName srv0042 -Unit MB

        Get disk space for the server srv0042 and displays in megabytes (MB).

    .EXAMPLE
        PS C:\> Get-DbaDiskSpace -ComputerName srv0042, srv0007 -Unit TB

        Get disk space from two servers and displays in terabytes (TB).

    .EXAMPLE
        PS C:\> Get-DbaDiskSpace -ComputerName srv0042 -Force

        Get all disk and volume space information.

    .EXAMPLE
        PS C:\> Get-DbaDiskSpace -ComputerName srv0042 -ExcludeDrive 'C:\'

        Get all disk and volume space information.

    #>
    [CmdletBinding()]
    param (
        [Parameter(ValueFromPipeline)]
        [Alias('ServerInstance', 'SqlInstance', 'SqlServer')]
        [DbaInstanceParameter[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [ValidateSet('Bytes', 'KB', 'MB', 'GB', 'TB', 'PB')]
        [string]$Unit = 'GB',
        [switch]$CheckForSql,
        [PSCredential]$SqlCredential,
        [string[]]$ExcludeDrive,
        [Alias('Detailed', 'AllDrives')]
        [switch]$CheckFragmentation,
        [switch]$Force,
        [switch][Alias('Silent')]
        $EnableException
    )

    begin {
        Test-DbaDeprecation -DeprecatedOn 1.0.0 -Parameter Detailed
        Test-DbaDeprecation -DeprecatedOn 1.0.0 -Parameter AllDrives
        Test-DbaDeprecation -DeprecatedOn 1.0.0 -Parameter Unit

        $condition = " WHERE DriveType = 2 OR DriveType = 3"
        if (Test-Bound 'Force') {
            $condition = ""
        }

        # Keep track of what computer was already processed to avoid duplicates
        $processed = New-Object System.Collections.ArrayList

        <# In order to support properly identifying if a disk/volume is involved with ANY instance on a given computer #>
        $sqlDisks = New-Object System.Collections.ArrayList
    }

    process {
        foreach ($computer in $ComputerName) {
            if ($computer.ComputerName -notin $processed) {
                $null = $processed.Add($computer.ComputerName)
            } else {
                continue
            }

            try {
                $disks = Get-DbaCmObject -ComputerName $computer.ComputerName -Query "SELECT * FROM Win32_Volume$condition" -Credential $Credential -Namespace root\CIMv2 -ErrorAction Stop -WarningAction SilentlyContinue -EnableException
            } catch {
                Stop-Function -Message "Failed to connect to $computer." -EnableException $EnableException -ErrorRecord $_ -Target $computer.ComputerName -Continue
            }

            if ($CheckForSql) {
                try {
                    $sqlServices = Get-DbaService -ComputerName $computer -Type Engine
                } catch {
                    Write-Message -Level Warning -Message "Failed to connect to $computer to gather SQL Server instances, will not be reporting SQL Information." -ErrorRecord $_ -OverrideExceptionMessage -Target $computer.ComputerName
                }

                Write-Message -Level Verbose -Message "Instances found on $($computer): $($sqlServices.InstanceName.Count)"
                if ($sqlServices.InstanceName.Count -gt 0) {
                    foreach ($sqlService in $sqlServices) {
                        if ($sqlService.InstanceName -eq "MSSQLSERVER") {
                            $instanceName = $sqlService.ComputerName
                        } else {
                            $instanceName = "$($sqlService.ComputerName)\$($sqlService.InstanceName)"
                        }
                        Write-Message -Level VeryVerbose -Message "Processing instance $($instanceName)"
                        try {
                            $server = Connect-SqlInstance -SqlInstance $instanceName -SqlCredential $SqlCredential
                            if ($server.Version.Major -lt 9) {
                                $sql = "SELECT DISTINCT SUBSTRING(physical_name, 1, LEN(physical_name) - CHARINDEX('\', REVERSE(physical_name)) + 1) AS SqlDisk FROM sysaltfiles"
                            } else {
                                $sql = "SELECT DISTINCT SUBSTRING(physical_name, 1, LEN(physical_name) - CHARINDEX('\', REVERSE(physical_name)) + 1) AS SqlDisk FROM sys.master_files"
                            }
                            $results = $server.Query($sql)
                            if ($results.SqlDisk.Count -gt 0) {
                                foreach ($sqlDisk in $results.SqlDisk) {
                                    if (-not $sqlDisks.Contains($sqlDisk)) {
                                        $null = $sqlDisks.Add($sqlDisk)
                                    }
                                }
                            }
                        } catch {
                            Write-Message -Level Warning -Message "Failed to connect to $instanceName on $computer. SQL information may not be accurate or services have been stopped." -ErrorRecord $_ -OverrideExceptionMessage -Target $computer.ComputerName
                        }
                    }
                }
            }

            foreach ($disk in $disks) {
                if ($disk.Name -in $ExcludeDrive) {
                    continue
                }
                if ($disk.Name.StartsWith('\\') -and (-not $Force)) {
                    Write-Message -Level Verbose -Message "Skipping disk: $($disk.Name)" -Target $computer.ComputerName
                    continue
                }

                Write-Message -Level Verbose -Message "Processing disk: $($disk.Name)" -Target $computer.ComputerName

                $info = New-Object Sqlcollaborative.Dbatools.Computer.DiskSpace
                $info.ComputerName = $computer.ComputerName
                $info.Name = $disk.Name
                $info.Label = $disk.Label
                $info.Capacity = $disk.Capacity
                $info.Free = $disk.Freespace
                $info.BlockSize = $disk.BlockSize
                $info.FileSystem = $disk.FileSystem
                $info.Type = $disk.DriveType

                if ($CheckForSql) {
                    $drivePath = $disk.Name
                    $info.IsSqlDisk = $false
                    foreach ($sqlDisk in $sqlDisks) {
                        if ($sqlDisk -like ($drivePath + '*')) {
                            $info.IsSqlDisk = $true
                            break
                        }
                    }
                }
                $info
            }
        }
    }
}

tools\dbatools\functions\Get-DbaComputerSystem.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaComputerSystem {
    <#
    .SYNOPSIS
        Gets computer system information from the server.

    .DESCRIPTION
        Gets computer system information from the server and returns as an object.

    .PARAMETER ComputerName
        Target computer(s). If no computer name is specified, the local computer is targeted

    .PARAMETER Credential
        Alternate credential object to use for accessing the target computer(s).

    .PARAMETER IncludeAws
        If computer is hosted in AWS Infrastructure as a Service (IaaS), additional information will be included.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: ServerInfo
        Author: Shawn Melton (@wsmelton), https://wsmelton.github.io

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaComputerSystem

    .EXAMPLE
        PS C:\> Get-DbaComputerSystem

        Returns information about the local computer's computer system

    .EXAMPLE
        PS C:\> Get-DbaComputerSystem -ComputerName sql2016

        Returns information about the sql2016's computer system

    .EXAMPLE
        PS C:\> Get-DbaComputerSystem -ComputerName sql2016 -IncludeAws

        Returns information about the sql2016's computer system and includes additional properties around the EC2 instance.

    #>
    [CmdletBinding()]
    param (
        [Parameter(ValueFromPipeline)]
        [Alias("cn", "host", "Server")]
        [DbaInstanceParameter[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [switch]$IncludeAws,
        [switch][Alias('Silent')]
        $EnableException
    )
    process {
        foreach ($computer in $ComputerName) {
            try {
                $server = Resolve-DbaNetworkName -ComputerName $computer.ComputerName -Credential $Credential

                $computerResolved = $server.FullComputerName

                if (!$computerResolved) {
                    Stop-Function -Message "Unable to resolve hostname of $computer. Skipping." -Continue
                }

                if (Test-Bound "Credential") {
                    $computerSystem = Get-DbaCmObject -ClassName Win32_ComputerSystem -ComputerName $computerResolved -Credential $Credential
                } else {
                    $computerSystem = Get-DbaCmObject -ClassName Win32_ComputerSystem -ComputerName $computerResolved
                }

                $adminPasswordStatus =
                switch ($computerSystem.AdminPasswordStatus) {
                    0 { "Disabled" }
                    1 { "Enabled" }
                    2 { "Not Implemented" }
                    3 { "Unknown" }
                    default { "Unknown" }
                }

                $domainRole =
                switch ($computerSystem.DomainRole) {
                    0 { "Standalone Workstation" }
                    1 { "Member Workstation" }
                    2 { "Standalone Server" }
                    3 { "Member Server" }
                    4 { "Backup Domain Controller" }
                    5 { "Primary Domain Controller" }
                }

                $isHyperThreading = $false
                if ($computerSystem.NumberOfLogicalProcessors -gt $computerSystem.NumberofProcessors) {
                    $isHyperThreading = $true
                }

                if ($IncludeAws) {
                    $isAws = Invoke-Command2 -ComputerName $computerResolved -Credential $Credential -ScriptBlock { ((Invoke-TlsWebRequest -TimeoutSec 15 -Uri 'http://169.254.169.254').StatusCode) -eq 200 } -Raw

                    if ($isAws) {
                        $scriptBlock = {
                            [PSCustomObject]@{
                                AmiId            = (Invoke-TlsWebRequest -Uri 'http://169.254.169.254/latest/meta-data/ami-id').Content
                                IamRoleArn       = ((Invoke-TlsWebRequest -Uri 'http://169.254.169.254/latest/meta-data/iam/info').Content | ConvertFrom-Json).InstanceProfileArn
                                InstanceId       = (Invoke-TlsWebRequest -Uri 'http://169.254.169.254/latest/meta-data/instance-id').Content
                                InstanceType     = (Invoke-TlsWebRequest -Uri 'http://169.254.169.254/latest/meta-data/instance-type').Content
                                AvailabilityZone = (Invoke-TlsWebRequest -Uri 'http://169.254.169.254/latest/meta-data/placement/availability-zone').Content
                                PublicHostname   = (Invoke-TlsWebRequest -Uri 'http://169.254.169.254/latest/meta-data/public-hostname').Content
                            }
                        }
                        $awsProps = Invoke-Command2 -ComputerName $computerResolved -Credential $Credential -ScriptBlock $scriptBlock
                    } else {
                        Write-Message -Level Warning -Message "$computerResolved was not found to be an EC2 instance. Verify http://169.254.169.254 is accessible on the computer."
                    }
                }
                $inputObject = [PSCustomObject]@{
                    ComputerName            = $computerResolved
                    Domain                  = $computerSystem.Domain
                    DomainRole              = $domainRole
                    Manufacturer            = $computerSystem.Manufacturer
                    Model                   = $computerSystem.Model
                    SystemFamily            = $computerSystem.SystemFamily
                    SystemSkuNumber         = $computerSystem.SystemSKUNumber
                    SystemType              = $computerSystem.SystemType
                    NumberLogicalProcessors = $computerSystem.NumberOfLogicalProcessors
                    NumberProcessors        = $computerSystem.NumberOfProcessors
                    IsHyperThreading        = $isHyperThreading
                    TotalPhysicalMemory     = [DbaSize]$computerSystem.TotalPhysicalMemory
                    IsDaylightSavingsTime   = $computerSystem.EnableDaylightSavingsTime
                    DaylightInEffect        = $computerSystem.DaylightInEffect
                    DnsHostName             = $computerSystem.DNSHostName
                    IsSystemManagedPageFile = $computerSystem.AutomaticManagedPagefile
                    AdminPasswordStatus     = $adminPasswordStatus
                }
                if ($IncludeAws -and $isAws) {
                    Add-Member -Force -InputObject $inputObject -MemberType NoteProperty -Name AwsAmiId -Value $awsProps.AmiId
                    Add-Member -Force -InputObject $inputObject -MemberType NoteProperty -Name AwsIamRoleArn -Value $awsProps.IamRoleArn
                    Add-Member -Force -InputObject $inputObject -MemberType NoteProperty -Name AwsEc2InstanceId -Value $awsProps.InstanceId
                    Add-Member -Force -InputObject $inputObject -MemberType NoteProperty -Name AwsEc2InstanceType -Value $awsProps.InstanceType
                    Add-Member -Force -InputObject $inputObject -MemberType NoteProperty -Name AwsAvailabilityZone -Value $awsProps.AvailabilityZone
                    Add-Member -Force -InputObject $inputObject -MemberType NoteProperty -Name AwsPublicHostName -Value $awsProps.PublicHostname
                }
                $excludes = 'SystemSkuNumber', 'IsDaylightSavingsTime', 'DaylightInEffect', 'DnsHostName', 'AdminPasswordStatus'
                Select-DefaultView -InputObject $inputObject -ExcludeProperty $excludes
            } catch {
                Stop-Function -Message "Failure" -ErrorRecord $_ -Target $computer -Continue
            }
        }
    }
}

tools\dbatools\functions\Get-DbaEndpoint.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaEndpoint {
    <#
    .SYNOPSIS
        Returns endpoint objects from a SQL Server instance.

    .DESCRIPTION
        Returns endpoint objects from a SQL Server instance.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Endpoint
        Return only specific endpoints.

    .PARAMETER Type
        Return only specific types of endpoints. Options include: DatabaseMirroring, ServiceBroker, Soap, and TSql.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Endpoint
        Author: Garry Bargsley (@gbargsley), http://blog.garrybargsley.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaEndpoint

    .EXAMPLE
        PS C:\> Get-DbaEndpoint -SqlInstance localhost

        Returns all endpoints on the local default SQL Server instance

    .EXAMPLE
        PS C:\> Get-DbaEndpoint -SqlInstance localhost, sql2016

        Returns all endpoints for the local and sql2016 SQL Server instances

    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$Endpoint,
        [ValidateSet('DatabaseMirroring', 'ServiceBroker', 'Soap', 'TSql')]
        [string[]]$Type,
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            # Not sure why minimumversion isnt working
            if ($server.VersionMajor -lt 9) {
                Stop-Function -Message "SQL Server version 9 required - $instance not supported." -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $endpoints = $server.Endpoints

            if ($endpoint) {
                $endpoints = $endpoints | Where-Object Name -in $endpoint
            }
            if ($Type) {
                $endpoints = $endpoints | Where-Object EndpointType -in $Type
            }

            foreach ($end in $endpoints) {
                Write-Message -Level Verbose -Message "Getting endpoint $($end.Name) on $($server.Name)"
                if ($end.Protocol.Tcp.ListenerPort) {
                    if ($instance.ComputerName -match '\.') {
                        $dns = $instance.ComputerName
                    } else {
                        try {
                            $dns = [System.Net.Dns]::GetHostEntry($instance.ComputerName).HostName
                        } catch {
                            try {
                                $dns = [System.Net.Dns]::GetHostAddresses($instance.ComputerName)
                            } catch {
                                $dns = $instance.ComputerName
                            }
                        }
                    }

                    $fqdn = "TCP://" + $dns + ":" + $end.Protocol.Tcp.ListenerPort
                } else {
                    $fqdn = $null
                }

                Add-Member -Force -InputObject $end -MemberType NoteProperty -Name ComputerName -Value $server.ComputerName
                Add-Member -Force -InputObject $end -MemberType NoteProperty -Name InstanceName -Value $server.ServiceName
                Add-Member -Force -InputObject $end -MemberType NoteProperty -Name SqlInstance -Value $server.DomainInstanceName
                Add-Member -Force -InputObject $end -MemberType NoteProperty -Name Fqdn -Value $fqdn
                Add-Member -Force -InputObject $end -MemberType NoteProperty -Name Port -Value $end.Protocol.Tcp.ListenerPort
                if ($end.Protocol.Tcp.ListenerPort) {
                    Select-DefaultView -InputObject $end -Property ComputerName, InstanceName, SqlInstance, ID, Name, Port, EndpointState, EndpointType, Owner, IsAdminEndpoint, Fqdn, IsSystemObject
                } else {
                    Select-DefaultView -InputObject $end -Property ComputerName, InstanceName, SqlInstance, ID, Name, EndpointState, EndpointType, Owner, IsAdminEndpoint, Fqdn, IsSystemObject
                }
            }
        }
    }
}

tools\dbatools\functions\Get-DbaErrorLog.ps1

function Get-DbaErrorLog {
    <#
    .SYNOPSIS
        Gets the "SQL Error Log" of an instance

    .DESCRIPTION
        Gets the "SQL Error Log" of an instance. Returns all 10 error logs by default.

    .PARAMETER SqlInstance
        TThe target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Allows you to login to servers using SQL Logins as opposed to Windows Auth/Integrated/Trusted.

    .PARAMETER LogNumber
        An Int32 value that specifies the index number of the error log required.
        Error logs are listed 0 through 99, where 0 is the current error log and 99 is potential oldest log file.

        SQL Server errorlog rollover defaults to 6, but can be increased to 99. https://docs.microsoft.com/en-us/sql/database-engine/configure-windows/scm-services-configure-sql-server-error-logs

    .PARAMETER Source
        Filter results based on the Source of the error (e.g. Logon, Server, etc.)

    .PARAMETER Text
        Filter results based on a pattern of text (e.g. "login failed", "error: 12345").

    .PARAMETER After
        Filter the results based on datetime value.

    .PARAMETER Before
        Filter the results based on datetime value.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Instance, ErrorLog
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaErrorLog

    .EXAMPLE
        PS C:\> Get-DbaErrorLog -SqlInstance sql01\sharepoint

        Returns every log entry from sql01\sharepoint SQL Server instance.

    .EXAMPLE
        PS C:\> Get-DbaErrorLog -SqlInstance sql01\sharepoint -LogNumber 3, 6

        Returns all log entries for log number 3 and 6 on sql01\sharepoint SQL Server instance.

    .EXAMPLE
        PS C:\> Get-DbaErrorLog -SqlInstance sql01\sharepoint -Source Logon

        Returns every log entry, with a source of Logon, from sql01\sharepoint SQL Server instance.

    .EXAMPLE
        PS C:\> Get-DbaErrorLog -SqlInstance sql01\sharepoint -LogNumber 3 -Text "login failed"

        Returns every log entry for log number 3, with "login failed" in the text, from sql01\sharepoint SQL Server instance.

    .EXAMPLE
        PS C:\> $servers = "sql2014","sql2016", "sqlcluster\sharepoint"
        PS C:\> $servers | Get-DbaErrorLog -LogNumber 0

        Returns the most recent SQL Server error logs for "sql2014","sql2016" and "sqlcluster\sharepoint"

    .EXAMPLE
        PS C:\> Get-DbaErrorLog -SqlInstance sql01\sharepoint -After '2016-11-14 00:00:00'

        Returns every log entry found after the date 14 November 2016 from sql101\sharepoint SQL Server instance.

    .EXAMPLE
        PS C:\> Get-DbaErrorLog -SqlInstance sql01\sharepoint -Before '2016-08-16 00:00:00'

        Returns every log entry found before the date 16 August 2016 from sql101\sharepoint SQL Server instance.

    #>
    [CmdletBinding()]
    param (
        [Parameter(ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [ValidateRange(0, 99)]
        [int[]]$LogNumber,
        [object[]]$Source,
        [string]$Text,
        [datetime]$After,
        [datetime]$Before,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias Get-DbaLog
    }
    process {
        foreach ($instance in $SqlInstance) {

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            if ($LogNumber) {
                foreach ($number in $lognumber) {
                    foreach ($object in $server.ReadErrorLog($number)) {
                        if ( ($Source -and $object.ProcessInfo -ne $Source) -or ($Text -and $object.Text -notlike "*$Text*") -or ($After -and $object.LogDate -lt $After) -or ($Before -and $object.LogDate -gt $Before) ) {
                            continue
                        }
                        Write-Message -Level Verbose -Message "Processing $object"
                        Add-Member -Force -InputObject $object -MemberType NoteProperty ComputerName -value $server.ComputerName
                        Add-Member -Force -InputObject $object -MemberType NoteProperty InstanceName -value $server.ServiceName
                        Add-Member -Force -InputObject $object -MemberType NoteProperty SqlInstance -value $server.DomainInstanceName

                        # Select all of the columns you'd like to show
                        Select-DefaultView -InputObject $object -Property ComputerName, InstanceName, SqlInstance, LogDate, 'ProcessInfo as Source', Text
                    }
                }
            } else {
                foreach ($object in $server.ReadErrorLog()) {
                    if ( ($Source -and $object.ProcessInfo -ne $Source) -or ($Text -and $object.Text -notlike "*$Text*") -or ($After -and $object.LogDate -lt $After) -or ($Before -and $object.LogDate -gt $Before) ) {
                        continue
                    }
                    Write-Message -Level Verbose -Message "Processing $object"
                    Add-Member -Force -InputObject $object -MemberType NoteProperty ComputerName -value $server.ComputerName
                    Add-Member -Force -InputObject $object -MemberType NoteProperty InstanceName -value $server.ServiceName
                    Add-Member -Force -InputObject $object -MemberType NoteProperty SqlInstance -value $server.DomainInstanceName

                    # Select all of the columns you'd like to show
                    Select-DefaultView -InputObject $object -Property ComputerName, InstanceName, SqlInstance, LogDate, 'ProcessInfo as Source', Text
                }
            }
        }
    }
}

tools\dbatools\functions\Get-DbaConnection.ps1

#ValidationTags#CodeStyle,Messaging,FlowControl,Pipeline#
function Get-DbaConnection {
    <#
    .SYNOPSIS
        Returns a bunch of information from dm_exec_connections.

    .DESCRIPTION
        Returns a bunch of information from dm_exec_connections which, according to Microsoft:
        "Returns information about the connections established to this instance of SQL Server and the details of each connection. Returns server wide connection information for SQL Server. Returns current database connection information for SQL Database."

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. Server(s) must be SQL Server 2005 or higher.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Connection
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaConnection

    .EXAMPLE
        PS C:\> Get-DbaConnection -SqlInstance sql2016, sql2017

        Returns client connection information from sql2016 and sql2017

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential", "Cred")]
        [PSCredential]$SqlCredential,
        [switch]$EnableException
    )

    begin {
        $sql = "SELECT  SERVERPROPERTY('MachineName') AS ComputerName,
                            ISNULL(SERVERPROPERTY('InstanceName'), 'MSSQLSERVER') AS InstanceName,
                            SERVERPROPERTY('ServerName') AS SqlInstance,
                            session_id as SessionId, most_recent_session_id as MostRecentSessionId, connect_time as ConnectTime,
                            net_transport as Transport, protocol_type as ProtocolType, protocol_version as ProtocolVersion,
                            endpoint_id as EndpointId, encrypt_option as EncryptOption, auth_scheme as AuthScheme, node_affinity as NodeAffinity,
                            num_reads as Reads, num_writes as Writes, last_read as LastRead, last_write as LastWrite,
                            net_packet_size as PacketSize, client_net_address as ClientNetworkAddress, client_tcp_port as ClientTcpPort,
                            local_net_address as ServerNetworkAddress, local_tcp_port as ServerTcpPort, connection_id as ConnectionId,
                            parent_connection_id as ParentConnectionId, most_recent_sql_handle as MostRecentSqlHandle
                            FROM sys.dm_exec_connections"
    }

    process {
        foreach ($instance in $SqlInstance) {

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            Write-Message -Level Debug -Message "Getting results for the following query: $sql."
            try {
                $server.Query($sql)
            } catch {
                Stop-Function -Message "Failure" -Target $server -Exception $_ -Continue
            }
        }
    }
}

tools\dbatools\functions\Get-DbaCpuRingBuffer.ps1

function Get-DbaCpuRingBuffer {
    <#
    .SYNOPSIS
        Collects CPU data from sys.dm_os_ring_buffers.  Works on SQL Server 2005 and above.

    .DESCRIPTION
        This command is based off of Glen Berry's diagnostic query for average CPU

        The sys.dm_os_ring_buffers stores the average CPU utilization history
        by the current instance of SQL Server, plus the summed average CPU utilization
        by all other processes on your machine are captured in one minute increments
        for the past 256 minutes.

        Reference: https://www.sqlskills.com/blogs/glenn/sql-server-diagnostic-information-queries-detailed-day-16//

    .PARAMETER SqlInstance
        Allows you to specify a comma separated list of servers to query.

    .PARAMETER SqlCredential
        Allows you to login to servers using SQL Logins as opposed to Windows Auth/Integrated/Trusted. To use:
        $cred = Get-Credential, this pass this $cred to the param.

        Windows Authentication will be used if DestinationSqlCredential is not specified. To connect as a different Windows user, run PowerShell as that user.

    .PARAMETER CollectionMinutes
        Allows you to specify a Collection Period in Minutes. Default is 60 minutes

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: CPU
        Author: Patrick Flynn (@sqllensman)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaCpuRingBuffer

    .EXAMPLE
        PS C:\> Get-DbaCpuRingBuffer -SqlInstance sql2008, sqlserver2012

        Gets CPU Statistics from sys.dm_os_ring_buffers for servers sql2008 and sqlserver2012 for last 60 minutes.

    .EXAMPLE
        PS C:\> Get-DbaCpuRingBuffer -SqlInstance sql2008 -CollectionMinutes 240

        Gets CPU Statistics from sys.dm_os_ring_buffers for server sql2008 for last 240 minutes

    .EXAMPLE
        PS C:\> $output = Get-DbaCpuRingBuffer -SqlInstance sql2008 -CollectionMinutes 240 | Select * | ConvertTo-DbaDataTable

        Gets CPU Statistics from sys.dm_os_ring_buffers for server sql2008 for last 240 minutes into a Data Table.

    .EXAMPLE
        PS C:\> 'sql2008','sql2012' | Get-DbaCpuRingBuffer

        Gets CPU Statistics from sys.dm_os_ring_buffers for servers sql2008 and sqlserver2012

    .EXAMPLE
        PS C:\> $cred = Get-Credential sqladmin
        PS C:\> Get-DbaCpuRingBuffer -SqlInstance sql2008 -SqlCredential $cred

        Connects using sqladmin credential and returns CPU Statistics from sys.dm_os_ring_buffers from sql2008
    #>
    [CmdletBinding()]
    Param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "SqlServers")]
        [DbaInstance[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [int]$CollectionMinutes = 60,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        if (Test-FunctionInterrupt) { return }
        foreach ($instance in $SqlInstance) {
            Write-Message -Level Verbose -Message "Attempting to connect to $instance"

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            if ($server.VersionMajor -gt 9) {
                $currentTimestamp = ($server.Query("SELECT cpu_ticks / CONVERT (float, ( cpu_ticks / ms_ticks )) as TimeStamp FROM sys.dm_os_sys_info"))[0]
            } else {
                $currentTimestamp = ($server.Query("SELECT cpu_ticks / CONVERT(FLOAT, cpu_ticks_in_ms) as TimeStamp FROM sys.dm_os_sys_info"))[0]
            }
            Write-Message -Level Verbose -Message "Using current timestampe of $currentTimestamp"

            $sql = "With RingBufferSchedulerMonitor as
                (
                    SELECT
                        timestamp,
                        CONVERT(xml, record) AS record
                    FROM sys.dm_os_ring_buffers
                    WHERE (ring_buffer_type = N'RING_BUFFER_SCHEDULER_MONITOR')
                    AND (record LIKE '%%')
                ), RingBufferSchedulerMonitorValues as
                (
                    SELECT
                        record.value('(./Record/@id)[1]', 'int') AS record_id,
                        record.value('(./Record/SchedulerMonitorEvent/SystemHealth/SystemIdle)[1]', 'int') AS SystemIdle,
                        record.value('(./Record/SchedulerMonitorEvent/SystemHealth/ProcessUtilization)[1]', 'int') AS SQLProcessUtilization,
                        timestamp,
                        DATEADD(ss, (-1 * ($currentTimestamp - [timestamp]))/1000, GETDATE()) AS EventTime
                    FROM RingBufferSchedulerMonitor
                )
                Select
                    SERVERPROPERTY('ServerName') as ServerName,
                    record_id,
                    EventTime,
                    SQLProcessUtilization,
                    SystemIdle,
                    100 - SystemIdle - SQLProcessUtilization AS OtherProcessUtilization
                From RingBufferSchedulerMonitorValues
                WHERE EventTime> DATEADD(MINUTE, -$CollectionMinutes, GETDATE()) ;"

            Write-Message -Level Verbose -Message "Executing Sql Staement: $sql"
            foreach ($row in $server.Query($sql)) {
                [PSCustomObject]@{
                    ComputerName            = $server.NetName
                    InstanceName            = $server.ServiceName
                    SqlInstance             = $server.DomainInstanceName
                    RecordId                = $row.record_id
                    EventTime               = $row.EventTime
                    SQLProcessUtilization   = $row.SQLProcessUtilization
                    OtherProcessUtilization = $row.OtherProcessUtilization
                    SystemIdle              = $row.SystemIdle
                }
            }
        }
    }
}

tools\dbatools\functions\Get-DbaExecutionPlan.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaExecutionPlan {
    <#
    .SYNOPSIS
        Gets execution plans and metadata

    .DESCRIPTION
        Gets execution plans and metadata. Can pipe to Export-DbaExecutionPlan

        Thanks to following for the queries:
        https://www.simple-talk.com/sql/t-sql-programming/dmvs-for-query-plan-metadata/
        http://www.scarydba.com/2017/02/13/export-plans-cache-sqlplan-file/

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Credential object used to connect to the SQL Server as a different user

    .PARAMETER Database
        Return execution plans and metadata for only specific databases.

    .PARAMETER ExcludeDatabase
        Return execution plans and metadata for all but these specific databases

    .PARAMETER SinceCreation
        Datetime object used to narrow the results to a date

    .PARAMETER SinceLastExecution
        Datetime object used to narrow the results to a date

    .PARAMETER ExcludeEmptyQueryPlan
        Exclude results with empty query plan

    .PARAMETER Force
        Returns a ton of raw information about the execution plans

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Performance
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaExecutionPlan

    .EXAMPLE
        PS C:\> Get-DbaExecutionPlan -SqlInstance sqlserver2014a

        Gets all execution plans on  sqlserver2014a

    .EXAMPLE
        PS C:\> Get-DbaExecutionPlan -SqlInstance sqlserver2014a -Database db1, db2 -SinceLastExecution '2016-07-01 10:47:00'

        Gets all execution plans for databases db1 and db2 on sqlserver2014a since July 1, 2016 at 10:47 AM.

    .EXAMPLE
        PS C:\> Get-DbaExecutionPlan -SqlInstance sqlserver2014a, sql2016 -Exclude db1 | Format-Table

        Gets execution plan info for all databases except db1 on sqlserver2014a and sql2016 and makes the output pretty

    .EXAMPLE
        PS C:\> Get-DbaExecutionPlan -SqlInstance sql2014 -Database AdventureWorks2014, pubs -Force

        Gets super detailed information for execution plans on only for AdventureWorks2014 and pubs

    .EXAMPLE
        PS C:\> $servers = "sqlserver2014a","sql2016t"
        PS C:\> $servers | Get-DbaExecutionPlan -Force

        Gets super detailed information for execution plans on sqlserver2014a and sql2016

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [datetime]$SinceCreation,
        [datetime]$SinceLastExecution,
        [switch]$ExcludeEmptyQueryPlan,
        [switch]$Force,
        [switch]$EnableException
    )

    process {

        foreach ($instance in $sqlinstance) {
            try {
                try {
                    $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential -MinimumVersion 9
                } catch {
                    Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
                }

                if ($force -eq $true) {
                    $select = "SELECT * "
                } else {
                    $select = "SELECT DB_NAME(deqp.dbid) as DatabaseName, OBJECT_NAME(deqp.objectid) as ObjectName,
                    detqp.query_plan AS SingleStatementPlan,
                    deqp.query_plan AS BatchQueryPlan,
                    ROW_NUMBER() OVER ( ORDER BY Statement_Start_offset ) AS QueryPosition,
                    sql_handle as SqlHandle,
                    plan_handle as PlanHandle,
                    creation_time as CreationTime,
                    last_execution_time as LastExecutionTime"
                }

                $from = " FROM sys.dm_exec_query_stats deqs
                        CROSS APPLY sys.dm_exec_text_query_plan(deqs.plan_handle,
                            deqs.statement_start_offset,
                            deqs.statement_end_offset) AS detqp
                        CROSS APPLY sys.dm_exec_query_plan(deqs.plan_handle) AS deqp
                        CROSS APPLY sys.dm_exec_sql_text(deqs.plan_handle) AS execText"

                if ($ExcludeDatabase -or $Database -or $SinceCreation -or $SinceLastExecution -or $ExcludeEmptyQueryPlan -eq $true) {
                    $where = " WHERE "
                }

                $wherearray = @()

                if ($Database) {
                    $dblist = $Database -join "','"
                    $wherearray += " DB_NAME(deqp.dbid) in ('$dblist') "
                }

                if ($null -ne $SinceCreation) {
                    Write-Message -Level Verbose -Message "Adding creation time"
                    $wherearray += " creation_time >= '" + $SinceCreation.ToString("yyyy-MM-dd HH:mm:ss") + "' "
                }

                if ($null -ne $SinceLastExecution) {
                    Write-Message -Level Verbose -Message "Adding last exectuion time"
                    $wherearray += " last_execution_time >= '" + $SinceLastExecution.ToString("yyyy-MM-dd HH:mm:ss") + "' "
                }

                if ($ExcludeDatabase) {
                    $dblist = $ExcludeDatabase -join "','"
                    $wherearray += " DB_NAME(deqp.dbid) not in ('$dblist') "
                }

                if ($ExcludeEmptyQueryPlan) {
                    $wherearray += " detqp.query_plan is not null"
                }

                if ($where.length -gt 0) {
                    $wherearray = $wherearray -join " and "
                    $where = "$where $wherearray"
                }

                $sql = "$select $from $where"
                Write-Message -Level Debug -Message $sql

                if ($Force -eq $true) {
                    $server.Query($sql)
                } else {
                    foreach ($row in $server.Query($sql)) {
                        $simple = ([xml]$row.SingleStatementPlan).ShowPlanXML.BatchSequence.Batch.Statements.StmtSimple
                        $sqlhandle = "0x"; $row.sqlhandle | ForEach-Object { $sqlhandle += ("{0:X}" -f $_).PadLeft(2, "0") }
                        $planhandle = "0x"; $row.planhandle | ForEach-Object { $planhandle += ("{0:X}" -f $_).PadLeft(2, "0") }
                        $planWarnings = $simple.QueryPlan.Warnings.PlanAffectingConvert;

                        [pscustomobject]@{
                            ComputerName                      = $server.ComputerName
                            InstanceName                      = $server.ServiceName
                            SqlInstance                       = $server.DomainInstanceName
                            DatabaseName                      = $row.DatabaseName
                            ObjectName                        = $row.ObjectName
                            QueryPosition                     = $row.QueryPosition
                            SqlHandle                         = $SqlHandle
                            PlanHandle                        = $PlanHandle
                            CreationTime                      = $row.CreationTime
                            LastExecutionTime                 = $row.LastExecutionTime
                            StatementCondition                = ([xml]$row.SingleStatementPlan).ShowPlanXML.BatchSequence.Batch.Statements.StmtCond
                            StatementSimple                   = $simple
                            StatementId                       = $simple.StatementId
                            StatementCompId                   = $simple.StatementCompId
                            StatementType                     = $simple.StatementType
                            RetrievedFromCache                = $simple.RetrievedFromCache
                            StatementSubTreeCost              = $simple.StatementSubTreeCost
                            StatementEstRows                  = $simple.StatementEstRows
                            SecurityPolicyApplied             = $simple.SecurityPolicyApplied
                            StatementOptmLevel                = $simple.StatementOptmLevel
                            QueryHash                         = $simple.QueryHash
                            QueryPlanHash                     = $simple.QueryPlanHash
                            StatementOptmEarlyAbortReason     = $simple.StatementOptmEarlyAbortReason
                            CardinalityEstimationModelVersion = $simple.CardinalityEstimationModelVersion

                            ParameterizedText                 = $simple.ParameterizedText
                            StatementSetOptions               = $simple.StatementSetOptions
                            QueryPlan                         = $simple.QueryPlan
                            BatchConditionXml                 = ([xml]$row.BatchQueryPlan).ShowPlanXML.BatchSequence.Batch.Statements.StmtCond
                            BatchSimpleXml                    = ([xml]$row.BatchQueryPlan).ShowPlanXML.BatchSequence.Batch.Statements.StmtSimple
                            BatchQueryPlanRaw                 = [xml]$row.BatchQueryPlan
                            SingleStatementPlanRaw            = [xml]$row.SingleStatementPlan
                            PlanWarnings                      = $planWarnings
                        } | Select-DefaultView -ExcludeProperty BatchQueryPlan, SingleStatementPlan, BatchConditionXmlRaw, BatchQueryPlanRaw, SingleStatementPlanRaw, PlanWarnings
                    }
                }
            } catch {
                Stop-Function -Message "Query Failure Failure" -ErrorRecord $_ -Target $instance -Continue
            }
        }
    }
}

tools\dbatools\functions\Get-DbaFeature.ps1

#ValidationTags#CodeStyle,Messaging,FlowControl,Pipeline#
function Get-DbaFeature {
    <#
    .SYNOPSIS
        Runs the SQL Server feature discovery report (setup.exe /Action=RunDiscovery)

    .DESCRIPTION
        Runs the SQL Server feature discovery report (setup.exe /Action=RunDiscovery)

        Inspired by Dave Mason's (@BeginTry) post at
        https://itsalljustelectrons.blogspot.be/2018/04/SQL-Server-Discovery-Report.html

        Assumptions:
        1. The sub-folder "Microsoft SQL Server" exists in $env:ProgramFiles,
        even if SQL was installed to a non-default path. This has been
        verified on SQL 2008R2 and SQL 2012. Further verification may be needed.
        2. The discovery report displays installed components for the version of SQL
        Server associated with setup.exe, along with installed components of all
        lesser versions of SQL Server that are installed.

    .PARAMETER ComputerName
        The target computer. If the target is not localhost, it must have PowerShell remoting enabled.

        Note that this is not the SqlInstance, but rather the ComputerName

    .PARAMETER Credential
        Allows you to login to servers using alternative credentials. To use:

        $cred = Get-Credential, then pass $cred object to the -Credential parameter.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Feature, Component
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaFeature

    .EXAMPLE
        PS C:\> Get-DbaFeature -ComputerName sql2017, sql2016, sql2005

        Gets all SQL Server features for all instances on sql2017, sql2016 and sql2005.

    .EXAMPLE
        PS C:\> Get-DbaFeature -Verbose

        Gets all SQL Server features for all instances on localhost. Outputs to screen if no instances are found.

    .EXAMPLE
        PS C:\> Get-DbaFeature -ComputerName sql2017 -Credential ad\sqldba

        Gets all SQL Server features for all instances on sql2017 using the ad\sqladmin credential (which has access to the Windows Server).

    #>
    [CmdletBinding()]
    param (
        [parameter(ValueFromPipeline)]
        [DbaInstanceParameter[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [switch]$EnableException
    )

    begin {
        $scriptblock = {
            $setup = Get-ChildItem -Recurse -Include setup.exe -Path "$env:ProgramFiles\Microsoft SQL Server" -ErrorAction SilentlyContinue |
                Where-Object { $_.FullName -match 'Setup Bootstrap\\SQL' -or $_.FullName -match 'Bootstrap\\Release\\Setup.exe' -or $_.FullName -match 'Bootstrap\\Setup.exe' } |
                Sort-Object FullName -Descending | Select-Object -First 1
            if ($setup) {
                $null = Start-Process -FilePath $setup.FullName -ArgumentList "/Action=RunDiscovery /q" -Wait
                $parent = Split-Path (Split-Path $setup.Fullname)
                $xmlfile = Get-ChildItem -Recurse -Include SqlDiscoveryReport.xml -Path $parent | Sort-Object LastWriteTime -Descending | Select-Object -First 1

                if ($xmlfile) {
                    $xml = [xml](Get-Content -Path $xmlfile)
                    $xml.ArrayOfDiscoveryInformation.DiscoveryInformation
                }
            }
        }
    }

    process {
        foreach ($computer in $ComputerName) {
            try {
                $results = Invoke-Command2 -ComputerName $Computer -ScriptBlock $scriptblock -Credential $Credential -Raw

                if (-not $results) {
                    Write-Message -Level Verbose -Message "No features found on $computer"
                }

                foreach ($result in $results) {
                    [pscustomobject]@{
                        ComputerName = $computer
                        Product      = $result.Product
                        Instance     = $result.Instance
                        InstanceID   = $result.InstanceID
                        Feature      = $result.Feature
                        Language     = $result.Language
                        Edition      = $result.Edition
                        Version      = $result.Version
                        Clustered    = $result.Clustered
                        Configured   = $result.Configured
                    }
                }
            } catch {
                Stop-Function -Continue -ErrorRecord $_ -Message "Failure"
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Get-DbaSqlFeature
    }
}

tools\dbatools\functions\Get-DbaFile.ps1

function Get-DbaFile {
    <#
    .SYNOPSIS
        Get-DbaFile finds files in any directory specified on a remote SQL Server

    .DESCRIPTION
        This command searches all specified directories, allowing a DBA to see file information on a server without direct access

        You can filter by extension using the -FileType parameter. By default, the default data directory will be returned. You can provide and additional paths to search using the -Path parameter.

        Thanks to serg-52 for the query:  https://www.sqlservercentral.com/Forums/Topic1642213-391-1.aspx

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Allows you to login to servers using alternative credentials

    .PARAMETER Path
        Used to specify extra directories to search in addition to the default data directory.

    .PARAMETER FileType
        Used to specify filter by filetype. No dot required, just pass the extension.

    .PARAMETER Depth
        Used to specify recursive folder depth.  Default is 1, non-recursive.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Discovery
        Author: Brandon Abshire, netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaFile

    .EXAMPLE
        PS C:\> Get-DbaFile -SqlInstance sqlserver2014a -Path E:\Dir1

        Logs into the SQL Server "sqlserver2014a" using Windows credentials and searches E:\Dir for all files

    .EXAMPLE
        PS C:\> Get-DbaFile -SqlInstance sqlserver2014a -SqlCredential $cred -Path 'E:\sql files'

        Logs into the SQL Server "sqlserver2014a" using alternative credentials and returns all files in 'E:\sql files'

    .EXAMPLE
        PS C:\> $all = Get-DbaDefaultPath -SqlInstance sql2014
        PS C:\> Get-DbaFile -SqlInstance sql2014 -Path $all.Data, $all.Log, $all.Backup -Depth 3

        Returns the files in the default data, log and backup directories on sql2014, 3 directories deep (recursively).

    .EXAMPLE
        PS C:\> Get-DbaFile -SqlInstance sql2014 -Path 'E:\Dir1', 'E:\Dir2'

        Returns the files in "E:\Dir1" and "E:Dir2" on sql2014

    .EXAMPLE
        PS C:\> Get-DbaFile -SqlInstance sql2014, sql2016 -Path 'E:\Dir1' -FileType fsf, mld

        Finds files in E:\Dir1 ending with ".fsf" and ".mld" for both the servers sql2014 and sql2016.

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$Path,
        [string[]]$FileType,
        [int]$Depth = 1,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {
        $sql = ""

        function Get-SQLDirTreeQuery {
            param
            (
                $PathList
            )

            $q1 += "DECLARE @myPath nvarchar(4000);
                    DECLARE @depth SMALLINT = $Depth;

                    IF OBJECT_ID('tempdb..#DirectoryTree') IS NOT NULL
                    DROP TABLE #DirectoryTree;

                    CREATE TABLE #DirectoryTree (
                       id int IDENTITY(1,1)
                       ,subdirectory nvarchar(512)
                       ,depth int
                       ,isfile bit
                       , ParentDirectory int
                       ,flag tinyint default(0));"

            $q2 = "SET @myPath = 'dirname'
                    -- top level directory
                    INSERT #DirectoryTree (subdirectory,depth,isfile)
                       VALUES (@myPath,0,0);
                    -- all the rest under top level
                    INSERT #DirectoryTree (subdirectory,depth,isfile)
                       EXEC master.sys.xp_dirtree @myPath,@depth,1;


                    UPDATE #DirectoryTree
                       SET ParentDirectory = (
                          SELECT MAX(Id) FROM #DirectoryTree
                          WHERE Depth = d.Depth - 1 AND Id < d.Id   )
                    FROM #DirectoryTree d
                    WHERE ParentDirectory is NULL;"

            $query_files_sql = "-- SEE all with full paths
                    WITH dirs AS (
                        SELECT
                           Id,subdirectory,depth,isfile,ParentDirectory,flag
                           , CAST (null AS NVARCHAR(MAX)) AS container
                           , CAST([subdirectory] AS NVARCHAR(MAX)) AS dpath
                           FROM #DirectoryTree
                           WHERE ParentDirectory IS NULL
                        UNION ALL
                        SELECT
                           d.Id,d.subdirectory,d.depth,d.isfile,d.ParentDirectory,d.flag
                           , dpath as container
                           , dpath +'\'+d.[subdirectory]
                        FROM #DirectoryTree AS d
                        INNER JOIN dirs ON  d.ParentDirectory = dirs.id
                        WHERE dpath NOT LIKE '%RECYCLE.BIN%'
                    )
                    SELECT subdirectory as filename, container as filepath, isfile, dpath as fullpath FROM dirs
                    WHERE container IS NOT NULL
                    -- Dir style ordering
                    ORDER BY container, isfile, subdirectory"

            # build the query string based on how many directories they want to enumerate
            $sql = $q1
            $sql += $($PathList | Where-Object { $_ -ne '' } | ForEach-Object { "$([System.Environment]::Newline)$($q2 -Replace 'dirname', $_)" })
            $sql += $query_files_sql
            #Write-Message -Level Debug -Message $sql
            return $sql
        }

        function Format-Path {
            param ($path)
            $path = $path.Trim()
            #Thank you windows 2000
            $path = $path -replace '[^A-Za-z0-9 _\.\-\\:]', '__'
            return $path
        }

        if ($FileType) {
            $FileTypeComparison = $FileType | ForEach-Object { $_.ToLower() } | Where-Object { $_ } | Sort-Object | Get-Unique
        }
    }

    process {
        foreach ($instance in $SqlInstance) {

            #Variable marked as unused by PSScriptAnalyzer
            #$paths = @()
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            # Get the default data and log directories from the instance
            if (-not (Test-Bound -ParameterName Path)) { $Path = (Get-DbaDefaultPath -SqlInstance $server).Data }

            Write-Message -Level Verbose -Message "Adding paths"
            $sql = Get-SQLDirTreeQuery $Path
            Write-Message -Level Debug -Message $sql

            # This should remain as not .Query() to be compat with a PSProvider Chrissy is working on
            $datatable = $server.ConnectionContext.ExecuteWithResults($sql).Tables.Rows

            Write-Message -Level Verbose -Message "$($datatable.Rows.Count) files found."
            if ($FileTypeComparison) {
                foreach ($row in $datatable) {
                    foreach ($type in $FileTypeComparison) {
                        if ($row.filename.ToLower().EndsWith(".$type")) {
                            [pscustomobject]@{
                                ComputerName   = $server.ComputerName
                                InstanceName   = $server.ServiceName
                                SqlInstance    = $server.DomainInstanceName
                                Filename       = $row.fullpath
                                RemoteFilename = Join-AdminUnc -Servername $server.ComputerName -Filepath $row.fullpath
                            } | Select-DefaultView -ExcludeProperty ComputerName, InstanceName, RemoteFilename
                        }
                    }
                }
            } else {
                foreach ($row in $datatable) {
                    [pscustomobject]@{
                        ComputerName   = $server.ComputerName
                        InstanceName   = $server.ServiceName
                        SqlInstance    = $server.DomainInstanceName
                        Filename       = $row.fullpath
                        RemoteFilename = Join-AdminUnc -Servername $server.ComputerName -Filepath $row.fullpath
                    } | Select-DefaultView -ExcludeProperty ComputerName, InstanceName, RemoteFilename
                }
            }
        }
    }
}

tools\dbatools\functions\Get-DbaFilestream.ps1

#ValidationTags#CodeStyle,Messaging,FlowControl,Pipeline#
function Get-DbaFilestream {
    <#
    .SYNOPSIS
        Returns the status of Filestream on specified SQL Server for both the Service and Instance levels.

    .DESCRIPTION
        Returns the status of Filestream on specified SQL Server for both the Service and Instance levels.

    .PARAMETER SqlInstance
        SQL Server name or SMO object representing the SQL Server to connect to. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. Defaults to localhost.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Credential
        Login to the target Windows server using alternative credentials.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Filestream
        Author: Stuart Moore ( @napalmgram ) | Chrissy LeMaire ( @cl )
        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaFilestream

    .EXAMPLE
        PS C:\> Get-DbaFilestream -SqlInstance server1\instance2

        Will return the status of Filestream configuration for the service and instance server1\instance2

    .EXAMPLE
        PS C:\> Get-DbaFilestream -SqlInstance server1\instance2 -SqlCredential sqladmin

        Prompts for the password to the SQL Login "sqladmin" then returns the status of Filestream configuration for the service and instance server1\instance2
       #>
    [CmdletBinding()]
    param (
        [parameter(ValueFromPipeline)]
        [DbaInstance[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [PSCredential]$Credential,
        [switch]$EnableException
    )
    begin {
        $idServiceFS = [ordered]@{
            0 = 'Disabled'
            1 = 'FileStream enabled for T-Sql access'
            2 = 'FileStream enabled for T-Sql and IO streaming access'
            3 = 'FileStream enabled for T-Sql, IO streaming, and remote clients'
        }

        $idInstanceFS = [ordered]@{
            0 = 'Disabled'
            1 = 'T-SQL access enabled'
            2 = 'Full access enabled'
        }
    }
    process {
        foreach ($instance in $SqlInstance) {
            $computer = $instance.ComputerName
            $instanceName = $instance.InstanceName

            <# Get Service-Level information #>
            if ($instance.IsLocalHost) {
                $computerName = $computer
            } else {
                $computerName = (Resolve-DbaNetworkName -ComputerName $computer -Credential $Credential).FullComputerName
            }

            Write-Message -Level Verbose -Message "Attempting to connect to $computer"
            try {
                $ognamespace = Get-DbaCmObject -EnableException -ComputerName $computerName -Namespace root\Microsoft\SQLServer -Query "SELECT NAME FROM __NAMESPACE WHERE NAME LIKE 'ComputerManagement%'"
                $namespace = $ognamespace | Where-Object {
                    (Get-DbaCmObject -EnableException -ComputerName $computerName -Namespace $("root\Microsoft\SQLServer\" + $_.Name) -ClassName FilestreamSettings).Count -gt 0
                } |
                    Sort-Object Name -Descending | Select-Object -First 1

                if (-not $namespace) {
                    $namespace = $ognamespace
                }

                if ($namespace.Name) {
                    $serviceFS = Get-DbaCmObject -EnableException -ComputerName $computerName -Namespace $("root\Microsoft\SQLServer\" + $namespace.Name) -ClassName FilestreamSettings | Where-Object InstanceName -eq $instanceName | Select-Object -First 1
                } else {
                    Write-Message -Level Warning -Message "No ComputerManagement was found on $computer. Service level information may not be collected." -Target $computer
                }
            } catch {
                Stop-Function -Message "Issue collecting service-level information on $computer for $instanceName" -Target $computer -ErrorRecord $_ -Continue
            }

            <# Get Instance-Level information #>
            try {
                Write-Message -Level Verbose -Message "Connecting to $instance."
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential -MinimumVersion 10
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            try {
                $instanceFS = Get-DbaSpConfigure -SqlInstance $server -Name FilestreamAccessLevel | Select-Object ConfiguredValue, RunningValue
            } catch {
                Stop-Function -Message "Issue collection instance-level configuration on $instanceName" -Target $server -ErrorRecord $_ -Exception $_.Exception -Continue
            }

            $pendingRestart = $instanceFS.ConfiguredValue -ne $instanceFS.RunningValue

            if (($serviceFS.AccessLevel -ne 0) -and ($instanceFS.RunningValue -ne 0)) {
                if (($serviceFS.AccessLevel -eq $instanceFS.RunningValue) -and $pendingRestart) {
                    Write-Message -Level Verbose -Message "A restart of the instance is pending before Filestream is configured."
                }
            }

            $runvalue = (Get-DbaSpConfigure -SqlInstance $server -Name FilestreamAccessLevel | Select-Object RunningValue).RunningValue
            $servicelevel = [int]$serviceFS.AccessLevel

            [PsCustomObject]@{
                ComputerName        = $server.NetName
                InstanceName        = $server.ServiceName
                SqlInstance         = $server.DomainInstanceName
                InstanceAccess      = $idInstanceFS[$runvalue]
                ServiceAccess       = $idServiceFS[$servicelevel]
                ServiceShareName    = $serviceFS.ShareName
                InstanceAccessLevel = $instanceFS.RunningValue
                ServiceAccessLevel  = $serviceFS.AccessLevel
                Credential          = $Credential
                SqlCredential       = $SqlCredential
            } | Select-DefaultView -Property ComputerName, InstanceName, SqlInstance, InstanceAccess, ServiceAccess, ServiceShareName
        }
    }
}

tools\dbatools\functions\Get-DbaForceNetworkEncryption.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaForceNetworkEncryption {
    <#
    .SYNOPSIS
        Gets Force Encryption settings for a SQL Server instance

    .DESCRIPTION
        Gets Force Encryption settings for a SQL Server instance. Note that this requires access to the Windows Server - not the SQL instance itself.

        This setting is found in Configuration Manager.

    .PARAMETER SqlInstance
       The target SQL Server instance or instances. Defaults to localhost.

    .PARAMETER Credential
        Allows you to login to the computer (not sql instance) using alternative Windows credentials

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Certificate
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaForceNetworkEncryption

    .EXAMPLE
        PS C:\> Get-DbaForceNetworkEncryption

        Gets Force Encryption properties on the default (MSSQLSERVER) instance on localhost - requires (and checks for) RunAs admin.

    .EXAMPLE
        PS C:\> Get-DbaForceNetworkEncryption -SqlInstance sql01\SQL2008R2SP2

        Gets Force Network Encryption for the SQL2008R2SP2 on sql01. Uses Windows Credentials to both login and view the registry.

       #>
    [CmdletBinding()]
    param (
        [Parameter(ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "ComputerName")]
        [DbaInstanceParameter[]]$SqlInstance = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            Write-Message -Level VeryVerbose -Message "Processing $instance" -Target $instance
            $null = Test-ElevationRequirement -ComputerName $instance -Continue

            Write-Message -Level Verbose -Message "Resolving hostname"
            $resolved = $null
            $resolved = Resolve-DbaNetworkName -ComputerName $instance

            if ($null -eq $resolved) {
                Stop-Function -Message "Can't resolve $instance" -Target $instance -Continue -Category InvalidArgument
            }

            try {
                $sqlwmi = Invoke-ManagedComputerCommand -ComputerName $resolved.FullComputerName -ScriptBlock {
                    $wmi.Services
                } -Credential $Credential -ErrorAction Stop | Where-Object DisplayName -eq "SQL Server ($($instance.InstanceName))"
            } catch {
                Stop-Function -Message "Failed to access $instance" -Target $instance -Continue -ErrorRecord $_
            }

            $regroot = ($sqlwmi.AdvancedProperties | Where-Object Name -eq REGROOT).Value
            $vsname = ($sqlwmi.AdvancedProperties | Where-Object Name -eq VSNAME).Value
            try {
                $instancename = $sqlwmi.DisplayName.Replace('SQL Server (', '').Replace(')', '') # Don't clown, I don't know regex :(
            } catch {
                # Probably because the instance name has been aliased or does not exist or something
                # here to avoid an empty catch
                $null = 1
            }
            $serviceaccount = $sqlwmi.ServiceAccount

            if ([System.String]::IsNullOrEmpty($regroot)) {
                $regroot = $sqlwmi.AdvancedProperties | Where-Object {
                    $_ -match 'REGROOT'
                }
                $vsname = $sqlwmi.AdvancedProperties | Where-Object {
                    $_ -match 'VSNAME'
                }

                if (![System.String]::IsNullOrEmpty($regroot)) {
                    $regroot = ($regroot -Split 'Value\=')[1]
                    $vsname = ($vsname -Split 'Value\=')[1]
                } else {
                    Stop-Function -Message "Can't find instance $vsname on $instance" -Continue -Category ObjectNotFound -Target $instance
                }
            }

            if ([System.String]::IsNullOrEmpty($vsname)) {
                $vsname = $instance
            }

            Write-Message -Level Verbose -Message "Regroot: $regroot" -Target $instance
            Write-Message -Level Verbose -Message "ServiceAcct: $serviceaccount" -Target $instance
            Write-Message -Level Verbose -Message "InstanceName: $instancename" -Target $instance
            Write-Message -Level Verbose -Message "VSNAME: $vsname" -Target $instance

            $scriptblock = {
                $regpath = "Registry::HKEY_LOCAL_MACHINE\$($args[0])\MSSQLServer\SuperSocketNetLib"
                $cert = (Get-ItemProperty -Path $regpath -Name Certificate).Certificate
                $forceencryption = (Get-ItemProperty -Path $regpath -Name ForceEncryption).ForceEncryption

                # [pscustomobject] doesn't always work, unsure why. so return hashtable then turn it into  pscustomobject on client
                @{
                    ComputerName          = $env:COMPUTERNAME
                    InstanceName          = $args[2]
                    SqlInstance           = $args[1]
                    ForceEncryption       = ($forceencryption -eq $true)
                    CertificateThumbprint = $cert
                }
            }

            try {
                $results = Invoke-Command2 -ComputerName $resolved.FullComputerName -Credential $Credential -ArgumentList $regroot, $vsname, $instancename -ScriptBlock $scriptblock -ErrorAction Stop -Raw
                foreach ($result in $results) {
                    [pscustomobject]$result
                }
            } catch {
                Stop-Function -Message "Failed to connect to $($resolved.FullComputerName) using PowerShell remoting!" -ErrorRecord $_ -Target $instance -Continue
            }
        }
    }
}

tools\dbatools\functions\Get-DbaHelpIndex.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaHelpIndex {
    <#
    .SYNOPSIS
        Returns size, row and configuration information for indexes in databases.

    .DESCRIPTION
        This function will return detailed information on indexes (and optionally statistics) for all indexes in a database, or a given index should one be passed along.
        As this uses SQL Server DMVs to access the data it will only work in 2005 and up (sorry folks still running SQL Server 2000).
        For performance reasons certain statistics information will not be returned from SQL Server 2005 if an ObjectName is not provided.

        The data includes:
        - ObjectName: the table containing the index
        - IndexType: clustered/non-clustered/columnstore and whether the index is unique/primary key
        - KeyColumns: the key columns of the index
        - IncludeColumns: any include columns in the index
        - FilterDefinition: any filter that may have been used in the index
        - DataCompression: row/page/none depending upon whether or not compression has been used
        - IndexReads: the number of reads of the index since last restart or index rebuild
        - IndexUpdates: the number of writes to the index since last restart or index rebuild
        - SizeKB: the size the index in KB
        - IndexRows: the number of the rows in the index (note filtered indexes will have fewer rows than exist in the table)
        - IndexLookups: the number of lookups that have been performed (only applicable for the heap or clustered index)
        - MostRecentlyUsed: when the index was most recently queried (default to 1900 for when never read)
        - StatsSampleRows: the number of rows queried when the statistics were built/rebuilt (not included in SQL Server 2005 unless ObjectName is specified)
        - StatsRowMods: the number of changes to the statistics since the last rebuild
        - HistogramSteps: the number of steps in the statistics histogram (not included in SQL Server 2005 unless ObjectName is specified)
        - StatsLastUpdated: when the statistics were last rebuilt (not included in SQL Server 2005 unless ObjectName is specified)

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The database(s) to process. This list is auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        The database(s) to exclude. This list is auto-populated from the server.

    .PARAMETER ObjectName
        The name of a table for which you want to obtain the index information. If the two part naming convention for an object is not used it will use the default schema for the executing user. If not passed it will return data on all indexes in a given database.

    .PARAMETER IncludeStats
        If this switch is enabled, statistics as well as indexes will be returned in the output (statistics information such as the StatsRowMods will always be returned for indexes).

    .PARAMETER IncludeDataTypes
        If this switch is enabled, the output will include the data type of each column that makes up a part of the index definition (key and include columns).

    .PARAMETER IncludeFragmentation
        If this switch is enabled, the output will include fragmentation information.

    .PARAMETER InputObject
        Allows piping from Get-DbaDatabase

    .PARAMETER Raw
        If this switch is enabled, results may be less user-readable but more suitable for processing by other code.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Index
        Author: Nic Cain, https://sirsql.net/

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaHelpIndex

    .EXAMPLE
        PS C:\> Get-DbaHelpIndex -SqlInstance localhost -Database MyDB

        Returns information on all indexes on the MyDB database on the localhost.

    .EXAMPLE
        PS C:\> Get-DbaHelpIndex -SqlInstance localhost -Database MyDB,MyDB2

        Returns information on all indexes on the MyDB & MyDB2 databases.

    .EXAMPLE
        PS C:\> Get-DbaHelpIndex -SqlInstance localhost -Database MyDB -ObjectName dbo.Table1

        Returns index information on the object dbo.Table1 in the database MyDB.

    .EXAMPLE
        PS C:\> Get-DbaHelpIndex -SqlInstance localhost -Database MyDB -ObjectName dbo.Table1 -IncludeStats

        Returns information on the indexes and statistics for the table dbo.Table1 in the MyDB database.

    .EXAMPLE
        PS C:\> Get-DbaHelpIndex -SqlInstance localhost -Database MyDB -ObjectName dbo.Table1 -IncludeDataTypes

        Returns the index information for the table dbo.Table1 in the MyDB database, and includes the data types for the key and include columns.

    .EXAMPLE
        PS C:\> Get-DbaHelpIndex -SqlInstance localhost -Database MyDB -ObjectName dbo.Table1 -Raw

        Returns the index information for the table dbo.Table1 in the MyDB database, and returns the numerical data without localized separators.

    .EXAMPLE
        PS C:\> Get-DbaHelpIndex -SqlInstance localhost -Database MyDB -IncludeStats -Raw

        Returns the index information for all indexes in the MyDB database as well as their statistics, and formats the numerical data without localized separators.

    .EXAMPLE
        PS C:\> Get-DbaHelpIndex -SqlInstance localhost -Database MyDB -IncludeFragmentation

        Returns the index information for all indexes in the MyDB database as well as their fragmentation

    .EXAMPLE
        PS C:\> Get-DbaDatabase -SqlInstance sql2017 -Database MyDB | Get-DbaHelpIndex

        Returns the index information for all indexes in the MyDB database

    #>
    [CmdletBinding()]
    param (
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [Parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Database[]]$InputObject,
        [string]$ObjectName,
        [switch]$IncludeStats,
        [switch]$IncludeDataTypes,
        [switch]$Raw,
        [switch]$IncludeFragmentation,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {

        #Add the table predicate to the query
        if (!$ObjectName) {
            $TablePredicate = "DECLARE @TableName NVARCHAR(256);";
        } else {
            $TablePredicate = "DECLARE @TableName NVARCHAR(256); SET @TableName = '$ObjectName';";
        }

        #Add Fragmentation info if requested
        $FragSelectColumn = ", NULL as avg_fragmentation_in_percent"
        $FragJoin = ''
        $OutputProperties = 'Database,Object,Index,IndexType,KeyColumns,IncludeColumns,FilterDefinition,DataCompression,IndexReads,IndexUpdates,SizeKB,IndexRows,IndexLookups,MostRecentlyUsed,StatsSampleRows,StatsRowMods,HistogramSteps,StatsLastUpdated'
        if ($IncludeFragmentation) {
            $FragSelectColumn = ', pstat.avg_fragmentation_in_percent'
            $FragJoin = "LEFT JOIN sys.dm_db_index_physical_stats(DB_ID(), NULL, NULL, NULL , 'DETAILED') pstat
             ON pstat.database_id = ustat.database_id
             AND pstat.object_id = ustat.object_id
             AND pstat.index_id = ustat.index_id"
            $OutputProperties = 'Database,Object,Index,IndexType,KeyColumns,IncludeColumns,FilterDefinition,DataCompression,IndexReads,IndexUpdates,SizeKB,IndexRows,IndexLookups,MostRecentlyUsed,StatsSampleRows,StatsRowMods,HistogramSteps,StatsLastUpdated,IndexFragInPercent'
        }
        $OutputProperties = $OutputProperties.Split(',')
        #Figure out if we are including stats in the results
        if ($IncludeStats) {
            $IncludeStatsPredicate = "";
        } else {
            $IncludeStatsPredicate = "WHERE StatisticsName IS NULL";
        }

        #Data types being returns with the results?
        if ($IncludeDataTypes) {
            $IncludeDataTypesPredicate = 'DECLARE @IncludeDataTypes BIT; SET @IncludeDataTypes = 1';
        } else {
            $IncludeDataTypesPredicate = 'DECLARE @IncludeDataTypes BIT; SET @IncludeDataTypes = 0';
        }

        #region SizesQuery
        $SizesQuery = "
            SET NOCOUNT ON;
            SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED;

            $TablePredicate
            $IncludeDataTypesPredicate
            ;

        DECLARE @IndexUsageStats TABLE
            (
            object_id INT ,
            index_id INT ,
            user_scans BIGINT ,
            user_seeks BIGINT ,
            user_updates BIGINT ,
            user_lookups BIGINT ,
            last_user_lookup DATETIME2(0) ,
            last_user_scan DATETIME2(0) ,
            last_user_seek DATETIME2(0) ,
            avg_fragmentation_in_percent FLOAT
            );

        DECLARE @StatsInfo TABLE
            (
            object_id INT ,
            stats_id INT ,
            stats_column_name NVARCHAR(128) ,
            stats_column_id INT ,
            stats_name NVARCHAR(128) ,
            stats_last_updated DATETIME2(0) ,
            stats_sampled_rows BIGINT ,
            rowmods BIGINT ,
            histogramsteps INT ,
            StatsRows BIGINT ,
            FullObjectName NVARCHAR(256)
            );

        INSERT  INTO @IndexUsageStats
                ( object_id ,
                index_id ,
                user_scans ,
                user_seeks ,
                user_updates ,
                user_lookups ,
                last_user_lookup ,
                last_user_scan ,
                last_user_seek ,
                avg_fragmentation_in_percent
                )
                SELECT  ustat.object_id ,
                        ustat.index_id ,
                        ustat.user_scans ,
                        ustat.user_seeks ,
                        ustat.user_updates ,
                        ustat.user_lookups ,
                        ustat.last_user_lookup ,
                        ustat.last_user_scan ,
                        ustat.last_user_seek
                        $FragSelectColumn
                FROM    sys.dm_db_index_usage_stats ustat
                $FragJoin
                WHERE   ustat.database_id = DB_ID();

        INSERT  INTO @StatsInfo
                ( object_id ,
                stats_id ,
                stats_column_name ,
                stats_column_id ,
                stats_name ,
                stats_last_updated ,
                stats_sampled_rows ,
                rowmods ,
                histogramsteps ,
                StatsRows ,
                FullObjectName
                )
                SELECT  s.object_id ,
                        s.stats_id ,
                        c.name ,
                        sc.stats_column_id ,
                        s.name ,
                        sp.last_updated ,
                        sp.rows_sampled ,
                        sp.modification_counter ,
                        sp.steps ,
                        sp.rows ,
                        QUOTENAME(sch.name) + '.' + QUOTENAME(t.name) AS FullObjectName
                FROM    [sys].[stats] AS [s]
                        INNER JOIN sys.stats_columns sc ON s.stats_id = sc.stats_id
                                                        AND s.object_id = sc.object_id
                        INNER JOIN sys.columns c ON c.object_id = sc.object_id
                                                    AND c.column_id = sc.column_id
                        INNER JOIN sys.tables t ON c.object_id = t.object_id
                        INNER JOIN sys.schemas sch ON sch.schema_id = t.schema_id
                        OUTER APPLY sys.dm_db_stats_properties([s].[object_id],
                                                            [s].[stats_id]) AS [sp]
                WHERE   s.object_id = CASE WHEN @TableName IS NULL THEN s.object_id
                                        else OBJECT_ID(@TableName)
                                    END;


        ;
        WITH    cteStatsInfo
                AS ( SELECT   object_id ,
                                si.stats_id ,
                                si.stats_name ,
                                STUFF((SELECT   N', ' + stats_column_name
                                    FROM     @StatsInfo si2
                                    WHERE    si2.object_id = si.object_id
                                                AND si2.stats_id = si.stats_id
                                    ORDER BY si2.stats_column_id
                                FOR   XML PATH(N'') ,
                                        TYPE).value(N'.[1]', N'nvarchar(1000)'), 1,
                                    2, N'') AS StatsColumns ,
                                MAX(si.stats_sampled_rows) AS SampleRows ,
                                MAX(si.rowmods) AS RowMods ,
                                MAX(si.histogramsteps) AS HistogramSteps ,
                                MAX(si.stats_last_updated) AS StatsLastUpdated ,
                                MAX(si.StatsRows) AS StatsRows,
                                FullObjectName
                    FROM     @StatsInfo si
                    GROUP BY si.object_id ,
                                si.stats_id ,
                                si.stats_name ,
                                si.FullObjectName
                    ),
                cteIndexSizes
                AS ( SELECT   object_id ,
                                index_id ,
                                CASE WHEN index_id < 2
                                    THEN ( ( SUM(in_row_data_page_count
                                                + lob_used_page_count
                                                + row_overflow_used_page_count)
                                            * 8192 ) / 1024 )
                                    else ( ( SUM(used_page_count) * 8192 ) / 1024 )
                                END AS SizeKB
                    FROM     sys.dm_db_partition_stats
                    GROUP BY object_id ,
                                index_id
                    ),
                cteRows
                AS ( SELECT   object_id ,
                                index_id ,
                                SUM(rows) AS IndexRows
                    FROM     sys.partitions
                    GROUP BY object_id ,
                                index_id
                    ),
                cteIndex
                AS ( SELECT   OBJECT_NAME(c.object_id) AS ObjectName ,
                                c.object_id ,
                                c.index_id ,
                                i.name COLLATE SQL_Latin1_General_CP1_CI_AS AS name ,
                                c.index_column_id ,
                                c.column_id ,
                                c.is_included_column ,
                                CASE WHEN @IncludeDataTypes = 0
                                        AND c.is_descending_key = 1
                                    THEN sc.name + ' DESC'
                                    WHEN @IncludeDataTypes = 0
                                        AND c.is_descending_key = 0 THEN sc.name
                                    WHEN @IncludeDataTypes = 1
                                        AND c.is_descending_key = 1
                                        AND c.is_included_column = 0
                                    THEN sc.name + ' DESC (' + t.name + ') '
                                    WHEN @IncludeDataTypes = 1
                                        AND c.is_descending_key = 0
                                        AND c.is_included_column = 0
                                    THEN sc.name + ' (' + t.name + ')'
                                    else sc.name
                                END AS ColumnName ,
                                i.filter_definition ,
                                ISNULL(dd.user_scans, 0) AS user_scans ,
                                ISNULL(dd.user_seeks, 0) AS user_seeks ,
                                ISNULL(dd.user_updates, 0) AS user_updates ,
                                ISNULL(dd.user_lookups, 0) AS user_lookups ,
                                CONVERT(DATETIME2(0), ISNULL(dd.last_user_lookup,
                                                            '1901-01-01')) AS LastLookup ,
                                CONVERT(DATETIME2(0), ISNULL(dd.last_user_scan,
                                                            '1901-01-01')) AS LastScan ,
                                CONVERT(DATETIME2(0), ISNULL(dd.last_user_seek,
                                                            '1901-01-01')) AS LastSeek ,
                                i.fill_factor ,
                                c.is_descending_key ,
                                p.data_compression_desc ,
                                i.type_desc ,
                                i.is_unique ,
                                i.is_unique_constraint ,
                                i.is_primary_key ,
                                ci.SizeKB ,
                                cr.IndexRows ,
                                QUOTENAME(sch.name) + '.' + QUOTENAME(tbl.name) AS FullObjectName ,
                                ISNULL(dd.avg_fragmentation_in_percent, 0) as avg_fragmentation_in_percent
                    FROM     sys.indexes i
                                JOIN sys.index_columns c ON i.object_id = c.object_id
                                                            AND i.index_id = c.index_id
                                JOIN sys.columns sc ON c.object_id = sc.object_id
                                                    AND c.column_id = sc.column_id
                                INNER JOIN sys.tables tbl ON c.object_id = tbl.object_id
                                INNER JOIN sys.schemas sch ON sch.schema_id = tbl.schema_id
                                LEFT JOIN sys.types t ON sc.user_type_id = t.user_type_id
                                LEFT JOIN @IndexUsageStats dd ON i.object_id = dd.object_id
                                                                AND i.index_id = dd.index_id --and dd.database_id = db_id()
                                JOIN sys.partitions p ON i.object_id = p.object_id
                                                        AND i.index_id = p.index_id
                                JOIN cteIndexSizes ci ON i.object_id = ci.object_id
                                                        AND i.index_id = ci.index_id
                                JOIN cteRows cr ON i.object_id = cr.object_id
                                                AND i.index_id = cr.index_id
                    WHERE    i.object_id = CASE WHEN @TableName IS NULL
                                                THEN i.object_id
                                                else OBJECT_ID(@TableName)
                                            END
                    ),
                cteResults
                AS ( SELECT   ci.FullObjectName ,
                                ci.object_id ,
                                MAX(index_id) AS Index_Id ,
                                ci.type_desc
                                + CASE WHEN ci.is_primary_key = 1
                                    THEN ' (PRIMARY KEY)'
                                    WHEN ci.is_unique_constraint = 1
                                    THEN ' (UNIQUE CONSTRAINT)'
                                    WHEN ci.is_unique = 1 THEN ' (UNIQUE)'
                                    else ''
                                END AS IndexType ,
                                name AS IndexName ,
                                STUFF((SELECT   N', ' + ColumnName
                                    FROM     cteIndex ci2
                                    WHERE    ci2.name = ci.name
                                                AND ci2.is_included_column = 0
                                    GROUP BY ci2.index_column_id ,
                                                ci2.ColumnName
                                    ORDER BY ci2.index_column_id
                                FOR   XML PATH(N'') ,
                                        TYPE).value(N'.[1]', N'nvarchar(1000)'), 1,
                                    2, N'') AS KeyColumns ,
                                ISNULL(STUFF((SELECT    N',  ' + ColumnName
                                            FROM      cteIndex ci3
                                            WHERE     ci3.name = ci.name
                                                        AND ci3.is_included_column = 1
                                            GROUP BY  ci3.index_column_id ,
                                                        ci3.ColumnName
                                            ORDER BY  ci3.index_column_id
                                    FOR   XML PATH(N'') ,
                                                TYPE).value(N'.[1]',
                                                            N'nvarchar(1000)'), 1, 2,
                                            N''), '') AS IncludeColumns ,
                                ISNULL(filter_definition, '') AS FilterDefinition ,
                                ci.fill_factor ,
                                CASE WHEN ci.data_compression_desc = 'NONE' THEN ''
                                    else ci.data_compression_desc
                                END AS DataCompression ,
                                MAX(ci.user_seeks) + MAX(ci.user_scans)
                                + MAX(ci.user_lookups) AS IndexReads ,
                                MAX(ci.user_lookups) AS IndexLookups ,
                                ci.user_updates AS IndexUpdates ,
                                ci.SizeKB AS SizeKB ,
                                ci.IndexRows AS IndexRows ,
                                CASE WHEN LastScan > LastSeek
                                        AND LastScan > LastLookup THEN LastScan
                                    WHEN LastSeek > LastScan
                                        AND LastSeek > LastLookup THEN LastSeek
                                    WHEN LastLookup > LastScan
                                        AND LastLookup > LastSeek THEN LastLookup
                                    else ''
                                END AS MostRecentlyUsed ,
                                AVG(ci.avg_fragmentation_in_percent) as avg_fragmentation_in_percent
                    FROM     cteIndex ci
                    GROUP BY ci.ObjectName ,
                                ci.name ,
                                ci.filter_definition ,
                                ci.object_id ,
                                ci.LastLookup ,
                                ci.LastSeek ,
                                ci.LastScan ,
                                ci.user_updates ,
                                ci.fill_factor ,
                                ci.data_compression_desc ,
                                ci.type_desc ,
                                ci.is_primary_key ,
                                ci.is_unique ,
                                ci.is_unique_constraint ,
                                ci.SizeKB ,
                                ci.IndexRows ,
                                ci.FullObjectName
                    ),
                AllResults
                AS ( SELECT   c.FullObjectName ,
                                IndexType ,
                                ISNULL(IndexName, si.stats_name) AS IndexName ,
                                NULL as StatisticsName ,
                                ISNULL(KeyColumns, si.StatsColumns) AS KeyColumns ,
                                ISNULL(IncludeColumns, '') AS IncludeColumns ,
                                FilterDefinition ,
                                fill_factor AS [FillFactor] ,
                                DataCompression ,
                                IndexReads ,
                                IndexUpdates ,
                                SizeKB ,
                                IndexRows ,
                                IndexLookups ,
                                MostRecentlyUsed ,
                                SampleRows AS StatsSampleRows ,
                                RowMods AS StatsRowMods ,
                                si.HistogramSteps ,
                                si.StatsLastUpdated ,
                                avg_fragmentation_in_percent AS IndexFragInPercent,
                                1 AS Ordering
                    FROM     cteResults c
                                INNER JOIN cteStatsInfo si ON si.object_id = c.object_id
                                                            AND si.stats_id = c.Index_Id
                    UNION
                    SELECT   QUOTENAME(sch.name) + '.' + QUOTENAME(tbl.name) AS FullObjectName ,
                                '' ,
                                '' ,
                                stats_name ,
                                StatsColumns ,
                                '' ,
                                '' AS FilterDefinition ,
                                '' AS Fill_Factor ,
                                '' AS DataCompression ,
                                '' AS IndexReads ,
                                '' AS IndexUpdates ,
                                '' AS SizeKB ,
                                StatsRows AS IndexRows ,
                                '' AS IndexLookups ,
                                '' AS MostRecentlyUsed ,
                                SampleRows AS StatsSampleRows ,
                                RowMods AS StatsRowMods ,
                                csi.HistogramSteps ,
                                csi.StatsLastUpdated ,
                                '' AS IndexFragInPercent ,
                                2
                    FROM     cteStatsInfo csi
                    INNER JOIN sys.tables tbl ON csi.object_id = tbl.object_id
                                INNER JOIN sys.schemas sch ON sch.schema_id = tbl.schema_id
                    WHERE    stats_id NOT IN (
                                SELECT  stats_id
                                FROM    cteResults c
                                        INNER JOIN cteStatsInfo si ON si.object_id = c.object_id
                                                                    AND si.stats_id = c.Index_Id )
                    )
            SELECT  FullObjectName ,
                    IndexType ,
                    IndexName ,
                    StatisticsName ,
                    KeyColumns ,
                    ISNULL(IncludeColumns, '') AS IncludeColumns ,
                    FilterDefinition ,
                    [FillFactor] AS [FillFactor] ,
                    DataCompression ,
                    IndexReads ,
                    IndexUpdates ,
                    SizeKB ,
                    IndexRows ,
                    IndexLookups ,
                    MostRecentlyUsed ,
                    StatsSampleRows ,
                    StatsRowMods ,
                    HistogramSteps ,
                    StatsLastUpdated ,
                    IndexFragInPercent
            FROM    AllResults
                    $IncludeStatsPredicate
        OPTION  ( RECOMPILE );
        "
        #endRegion SizesQuery


        #region sizesQuery2005
        $SizesQuery2005 = "
        SET NOCOUNT ON;
        SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED;

        $TablePredicate
        $IncludeDataTypesPredicate
        ;

        DECLARE @AllResults TABLE
            (
                RowNum INT ,
                FullObjectName	NVARCHAR(300) ,
                IndexType	NVARCHAR(256) ,
                IndexName	NVARCHAR(256) ,
                KeyColumns	NVARCHAR(2000) ,
                IncludeColumns	NVARCHAR(2000) ,
                FilterDefinition	NVARCHAR(100) ,
                [FillFactor]	TINYINT ,
                DataCompression	CHAR(4) ,
                IndexReads	BIGINT ,
                IndexUpdates	BIGINT ,
                SizeKB	BIGINT ,
                IndexRows	BIGINT ,
                IndexLookups	BIGINT ,
                MostRecentlyUsed	DATETIME ,
                StatsSampleRows	BIGINT ,
                StatsRowMods	BIGINT ,
                HistogramSteps	INT	,
                StatsLastUpdated	DATETIME ,
                object_id BIGINT ,
                index_id BIGINT
            );

        DECLARE @IndexUsageStats TABLE
            (
            object_id INT ,
            index_id INT ,
            user_scans BIGINT ,
            user_seeks BIGINT ,
            user_updates BIGINT ,
            user_lookups BIGINT ,
            last_user_lookup DATETIME ,
            last_user_scan DATETIME ,
            last_user_seek DATETIME ,
            avg_fragmentation_in_percent FLOAT
            );

        DECLARE @StatsInfo TABLE
            (
            object_id INT ,
            stats_id INT ,
            stats_column_name NVARCHAR(128) ,
            stats_column_id INT ,
            stats_name NVARCHAR(128) ,
            stats_last_updated DATETIME ,
            stats_sampled_rows BIGINT ,
            rowmods BIGINT ,
            histogramsteps INT ,
            StatsRows BIGINT ,
            FullObjectName NVARCHAR(256)
            );

        INSERT  INTO @IndexUsageStats
                ( object_id ,
                index_id ,
                user_scans ,
                user_seeks ,
                user_updates ,
                user_lookups ,
                last_user_lookup ,
                last_user_scan ,
                last_user_seek ,
                avg_fragmentation_in_percent
                )
                SELECT  ustat.object_id ,
                        ustat.index_id ,
                        ustat.user_scans ,
                        ustat.user_seeks ,
                        ustat.user_updates ,
                        ustat.user_lookups ,
                        ustat.last_user_lookup ,
                        ustat.last_user_scan ,
                        ustat.last_user_seek
                        $FragSelectColumn
                FROM    sys.dm_db_index_usage_stats ustat
                $FragJoin
                WHERE   database_id = DB_ID();


        INSERT  INTO @StatsInfo
                ( object_id ,
                stats_id ,
                stats_column_name ,
                stats_column_id ,
                stats_name ,
                stats_last_updated ,
                stats_sampled_rows ,
                rowmods ,
                histogramsteps ,
                StatsRows ,
                FullObjectName
                )
                SELECT  s.object_id ,
                        s.stats_id ,
                        c.name ,
                        sc.stats_column_id ,
                        s.name ,
                        NULL AS last_updated ,
                        NULL AS rows_sampled ,
                        NULL AS modification_counter ,
                        NULL AS steps ,
                        NULL AS rows ,
                        QUOTENAME(sch.name) + '.' + QUOTENAME(t.name) AS FullObjectName
                FROM    [sys].[stats] AS [s]
                        INNER JOIN sys.stats_columns sc ON s.stats_id = sc.stats_id
                                                        AND s.object_id = sc.object_id
                        INNER JOIN sys.columns c ON c.object_id = sc.object_id
                                                    AND c.column_id = sc.column_id
                        INNER JOIN sys.tables t ON c.object_id = t.object_id
                        INNER JOIN sys.schemas sch ON sch.schema_id = t.schema_id
                    --   OUTER APPLY sys.dm_db_stats_properties([s].[object_id],
                    --                                        [s].[stats_id]) AS [sp]
                WHERE   s.object_id = CASE WHEN @TableName IS NULL THEN s.object_id
                                        else OBJECT_ID(@TableName)
                                    END;


        ;
        WITH    cteStatsInfo
                AS ( SELECT   object_id ,
                                si.stats_id ,
                                si.stats_name ,
                                STUFF((SELECT   N', ' + stats_column_name
                                    FROM     @StatsInfo si2
                                    WHERE    si2.object_id = si.object_id
                                                AND si2.stats_id = si.stats_id
                                    ORDER BY si2.stats_column_id
                                FOR   XML PATH(N'') ,
                                        TYPE).value(N'.[1]', N'nvarchar(1000)'), 1,
                                    2, N'') AS StatsColumns ,
                                MAX(si.stats_sampled_rows) AS SampleRows ,
                                MAX(si.rowmods) AS RowMods ,
                                MAX(si.histogramsteps) AS HistogramSteps ,
                                MAX(si.stats_last_updated) AS StatsLastUpdated ,
                                MAX(si.StatsRows) AS StatsRows,
                                FullObjectName
                    FROM     @StatsInfo si
                    GROUP BY si.object_id ,
                                si.stats_id ,
                                si.stats_name ,
                                si.FullObjectName
                    ),
                cteIndexSizes
                AS ( SELECT   object_id ,
                                index_id ,
                                CASE WHEN index_id < 2
                                    THEN ( ( SUM(in_row_data_page_count
                                                + lob_used_page_count
                                                + row_overflow_used_page_count)
                                            * 8192 ) / 1024 )
                                    else ( ( SUM(used_page_count) * 8192 ) / 1024 )
                                END AS SizeKB
                    FROM     sys.dm_db_partition_stats
                    GROUP BY object_id ,
                                index_id
                    ),
                cteRows
                AS ( SELECT   object_id ,
                                index_id ,
                                SUM(rows) AS IndexRows
                    FROM     sys.partitions
                    GROUP BY object_id ,
                                index_id
                    ),
                cteIndex
                AS ( SELECT   OBJECT_NAME(c.object_id) AS ObjectName ,
                                c.object_id ,
                                c.index_id ,
                                i.name COLLATE SQL_Latin1_General_CP1_CI_AS AS name ,
                                c.index_column_id ,
                                c.column_id ,
                                c.is_included_column ,
                                CASE WHEN @IncludeDataTypes = 0
                                        AND c.is_descending_key = 1
                                    THEN sc.name + ' DESC'
                                    WHEN @IncludeDataTypes = 0
                                        AND c.is_descending_key = 0 THEN sc.name
                                    WHEN @IncludeDataTypes = 1
                                        AND c.is_descending_key = 1
                                        AND c.is_included_column = 0
                                    THEN sc.name + ' DESC (' + t.name + ') '
                                    WHEN @IncludeDataTypes = 1
                                        AND c.is_descending_key = 0
                                        AND c.is_included_column = 0
                                    THEN sc.name + ' (' + t.name + ')'
                                    else sc.name
                                END AS ColumnName ,
                                '' AS filter_definition ,
                                ISNULL(dd.user_scans, 0) AS user_scans ,
                                ISNULL(dd.user_seeks, 0) AS user_seeks ,
                                ISNULL(dd.user_updates, 0) AS user_updates ,
                                ISNULL(dd.user_lookups, 0) AS user_lookups ,
                                CONVERT(DATETIME, ISNULL(dd.last_user_lookup,
                                                            '1901-01-01')) AS LastLookup ,
                                CONVERT(DATETIME, ISNULL(dd.last_user_scan,
                                                            '1901-01-01')) AS LastScan ,
                                CONVERT(DATETIME, ISNULL(dd.last_user_seek,
                                                            '1901-01-01')) AS LastSeek ,
                                i.fill_factor ,
                                c.is_descending_key ,
                                'NONE' as data_compression_desc ,
                                i.type_desc ,
                                i.is_unique ,
                                i.is_unique_constraint ,
                                i.is_primary_key ,
                                ci.SizeKB ,
                                cr.IndexRows ,
                                QUOTENAME(sch.name) + '.' + QUOTENAME(tbl.name) AS FullObjectName ,
                                ISNULL(dd.avg_fragmentation_in_percent, 0) as avg_fragmentation_in_percent
                    FROM     sys.indexes i
                                JOIN sys.index_columns c ON i.object_id = c.object_id
                                                            AND i.index_id = c.index_id
                                JOIN sys.columns sc ON c.object_id = sc.object_id
                                                    AND c.column_id = sc.column_id
                                INNER JOIN sys.tables tbl ON c.object_id = tbl.object_id
                                INNER JOIN sys.schemas sch ON sch.schema_id = tbl.schema_id
                                LEFT JOIN sys.types t ON sc.user_type_id = t.user_type_id
                                LEFT JOIN @IndexUsageStats dd ON i.object_id = dd.object_id
                                                                AND i.index_id = dd.index_id --and dd.database_id = db_id()
                                JOIN sys.partitions p ON i.object_id = p.object_id
                                                        AND i.index_id = p.index_id
                                JOIN cteIndexSizes ci ON i.object_id = ci.object_id
                                                        AND i.index_id = ci.index_id
                                JOIN cteRows cr ON i.object_id = cr.object_id
                                                AND i.index_id = cr.index_id
                    WHERE    i.object_id = CASE WHEN @TableName IS NULL
                                                THEN i.object_id
                                                else OBJECT_ID(@TableName)
                                            END
                    ),
                cteResults
                AS ( SELECT   ci.FullObjectName ,
                                ci.object_id ,
                                MAX(index_id) AS Index_Id ,
                                ci.type_desc
                                + CASE WHEN ci.is_primary_key = 1
                                    THEN ' (PRIMARY KEY)'
                                    WHEN ci.is_unique_constraint = 1
                                    THEN ' (UNIQUE CONSTRAINT)'
                                    WHEN ci.is_unique = 1 THEN ' (UNIQUE)'
                                    else ''
                                END AS IndexType ,
                                name AS IndexName ,
                                STUFF((SELECT   N', ' + ColumnName
                                    FROM     cteIndex ci2
                                    WHERE    ci2.name = ci.name
                                                AND ci2.is_included_column = 0
                                    GROUP BY ci2.index_column_id ,
                                                ci2.ColumnName
                                    ORDER BY ci2.index_column_id
                                FOR   XML PATH(N'') ,
                                        TYPE).value(N'.[1]', N'nvarchar(1000)'), 1,
                                    2, N'') AS KeyColumns ,
                                ISNULL(STUFF((SELECT    N',  ' + ColumnName
                                            FROM      cteIndex ci3
                                            WHERE     ci3.name = ci.name
                                                        AND ci3.is_included_column = 1
                                            GROUP BY  ci3.index_column_id ,
                                                        ci3.ColumnName
                                            ORDER BY  ci3.index_column_id
                                    FOR   XML PATH(N'') ,
                                                TYPE).value(N'.[1]',
                                                            N'nvarchar(1000)'), 1, 2,
                                            N''), '') AS IncludeColumns ,
                                ISNULL(filter_definition, '') AS FilterDefinition ,
                                ci.fill_factor ,
                                CASE WHEN ci.data_compression_desc = 'NONE' THEN ''
                                    else ci.data_compression_desc
                                END AS DataCompression ,
                                MAX(ci.user_seeks) + MAX(ci.user_scans)
                                + MAX(ci.user_lookups) AS IndexReads ,
                                MAX(ci.user_lookups) AS IndexLookups ,
                                ci.user_updates AS IndexUpdates ,
                                ci.SizeKB AS SizeKB ,
                                ci.IndexRows AS IndexRows ,
                                CASE WHEN LastScan > LastSeek
                                        AND LastScan > LastLookup THEN LastScan
                                    WHEN LastSeek > LastScan
                                        AND LastSeek > LastLookup THEN LastSeek
                                    WHEN LastLookup > LastScan
                                        AND LastLookup > LastSeek THEN LastLookup
                                    else ''
                                END AS MostRecentlyUsed ,
                                AVG(ci.avg_fragmentation_in_percent) as avg_fragmentation_in_percent
                    FROM     cteIndex ci
                    GROUP BY ci.ObjectName ,
                                ci.name ,
                                ci.filter_definition ,
                                ci.object_id ,
                                ci.LastLookup ,
                                ci.LastSeek ,
                                ci.LastScan ,
                                ci.user_updates ,
                                ci.fill_factor ,
                                ci.data_compression_desc ,
                                ci.type_desc ,
                                ci.is_primary_key ,
                                ci.is_unique ,
                                ci.is_unique_constraint ,
                                ci.SizeKB ,
                                ci.IndexRows ,
                                ci.FullObjectName
                    ), AllResults AS
                        (		 SELECT   c.FullObjectName ,
                                ISNULL(IndexType, 'STATISTICS') AS IndexType ,
                                ISNULL(IndexName, '') AS IndexName ,
                                ISNULL(KeyColumns, '') AS KeyColumns ,
                                ISNULL(IncludeColumns, '') AS IncludeColumns ,
                                FilterDefinition ,
                                fill_factor AS [FillFactor] ,
                                DataCompression ,
                                IndexReads ,
                                IndexUpdates ,
                                SizeKB ,
                                IndexRows ,
                                IndexLookups ,
                                MostRecentlyUsed ,
                                NULL AS StatsSampleRows ,
                                NULL AS StatsRowMods ,
                                NULL AS HistogramSteps ,
                                NULL AS StatsLastUpdated ,
                                avg_fragmentation_in_percent as IndexFragInPercent,
                                1 AS Ordering ,
                                c.object_id ,
                                c.Index_Id
                    FROM     cteResults c
                                INNER JOIN cteStatsInfo si ON si.object_id = c.object_id
                                                            AND si.stats_id = c.Index_Id
                        UNION
                    SELECT   QUOTENAME(sch.name) + '.' + QUOTENAME(tbl.name) AS FullObjectName ,
                                'STATISTICS' ,
                                stats_name ,
                                StatsColumns ,
                                '' ,
                                '' AS FilterDefinition ,
                                '' AS Fill_Factor ,
                                '' AS DataCompression ,
                                '' AS IndexReads ,
                                '' AS IndexUpdates ,
                                '' AS SizeKB ,
                                StatsRows AS IndexRows ,
                                '' AS IndexLookups ,
                                '' AS MostRecentlyUsed ,
                                SampleRows AS StatsSampleRows ,
                                RowMods AS StatsRowMods ,
                                csi.HistogramSteps ,
                                csi.StatsLastUpdated ,
                                '' as IndexFragInPercent,
                                2 ,
                                csi.object_id ,
                                csi.stats_id
                    FROM     cteStatsInfo csi
                    INNER JOIN sys.tables tbl ON csi.object_id = tbl.object_id
                                INNER JOIN sys.schemas sch ON sch.schema_id = tbl.schema_id
                                LEFT JOIN (SELECT si.object_id, si.stats_id
                                            FROM    cteResults c
                                            INNER JOIN cteStatsInfo si ON si.object_id = c.object_id
                                                                    AND si.stats_id = c.Index_Id ) AS x on csi.object_id = x.object_id and csi.stats_id = x.stats_id
                        WHERE x.object_id is null
                    )
            INSERT INTO @AllResults
            SELECT  row_number() OVER (ORDER BY FullObjectName) AS RowNum ,
                    FullObjectName ,
                    ISNULL(IndexType, 'STATISTICS') AS IndexType ,
                    IndexName ,
                    KeyColumns ,
                    ISNULL(IncludeColumns, '') AS IncludeColumns ,
                    FilterDefinition ,
                    [FillFactor] AS [FillFactor] ,
                    DataCompression ,
                    IndexReads ,
                    IndexUpdates ,
                    SizeKB ,
                    IndexRows ,
                    IndexLookups ,
                    MostRecentlyUsed ,
                    StatsSampleRows ,
                    StatsRowMods ,
                    HistogramSteps ,
                    StatsLastUpdated ,
                    IndexFragInPercent ,
                    object_id ,
                    index_id
            FROM    AllResults
                    $IncludeStatsPredicate
        OPTION  ( RECOMPILE );

        /* Only update the stats data on 2005 for a single table, otherwise the run time for this is a potential problem for large table/index volumes */
        if @TableName IS NOT NULL
        BEGIN

            DECLARE @StatsInfo2005 TABLE (Name nvarchar(128), Updated DATETIME, Rows BIGINT, RowsSampled BIGINT, Steps INT, Density INT, AverageKeyLength INT, StringIndex NVARCHAR(20))

            DECLARE @SqlCall NVARCHAR(2000), @RowNum INT;
            SELECT @RowNum = min(RowNum) FROM @AllResults;
            WHILE @RowNum IS NOT NULL
            BEGIN
                SELECT @SqlCall = 'dbcc show_statistics('+FullObjectName+', '+IndexName+') with stat_header' FROM @AllResults WHERE RowNum = @RowNum;
                INSERT INTO @StatsInfo2005 exec (@SqlCall);
                UPDATE @AllResults
                    SET StatsSampleRows = RowsSampled,
                    HistogramSteps = Steps,
                    StatsLastUpdated = Updated
                    FROM @StatsInfo2005
                    WHERE RowNum = @RowNum;
                DELETE FROM @StatsInfo2005
                SELECT @RowNum = min(RowNum) FROM @AllResults WHERE RowNum > @RowNum;
            END;

        END;

        UPDATE a
        SET a.StatsRowMods = i.rowmodctr
        FROM @AllResults a
            JOIN sys.sysindexes i ON a.object_id = i.id AND a.index_id = i.indid;

        SELECT	FullObjectName ,
                IndexType ,
                IndexName ,
                KeyColumns ,
                IncludeColumns ,
                FilterDefinition ,
                [FillFactor] ,
                DataCompression ,
                IndexReads ,
                IndexUpdates ,
                SizeKB ,
                IndexRows ,
                IndexLookups ,
                MostRecentlyUsed ,
                StatsSampleRows ,
                StatsRowMods ,
                HistogramSteps ,
                StatsLastUpdated ,
                IndexFragInPercent
        FROM @AllResults;"

        #endregion sizesQuery2005
    }
    process {
        Write-Message -Level Debug -Message $SizesQuery
        Write-Message -Level Debug -Message $SizesQuery2005

        foreach ($instance in $SqlInstance) {

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 10
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $InputObject += Get-DbaDatabase -SqlInstance $server -Database $Database -ExcludeDatabase $ExcludeDatabase
        }

        foreach ($db in $InputObject) {
            $server = $db.Parent

            #Need to check the version of SQL
            if ($server.versionMajor -ge 10) {
                $indexesQuery = $SizesQuery
            } else {
                $indexesQuery = $SizesQuery2005
            }

            if (!$db.IsAccessible) {
                Stop-Function -Message "$db is not accessible. Skipping." -Continue
            }

            Write-Message -Level Debug -Message "$indexesQuery"
            try {
                $IndexDetails = $db.Query($indexesQuery)

                if (!$Raw) {
                    foreach ($detail in $IndexDetails) {
                        $recentlyused = [datetime]$detail.MostRecentlyUsed

                        if ($recentlyused.year -eq 1900) {
                            $recentlyused = $null
                        }

                        [pscustomobject]@{
                            ComputerName       = $server.ComputerName
                            InstanceName       = $server.ServiceName
                            SqlInstance        = $server.DomainInstanceName
                            Database           = $db.Name
                            Object             = $detail.FullObjectName
                            Index              = $detail.IndexName
                            IndexType          = $detail.IndexType
                            Statistics         = $detail.StatisticsName
                            KeyColumns         = $detail.KeyColumns
                            IncludeColumns     = $detail.IncludeColumns
                            FilterDefinition   = $detail.FilterDefinition
                            DataCompression    = $detail.DataCompression
                            IndexReads         = "{0:N0}" -f $detail.IndexReads
                            IndexUpdates       = "{0:N0}" -f $detail.IndexUpdates
                            Size               = "{0:N0}" -f $detail.SizeKB
                            IndexRows          = "{0:N0}" -f $detail.IndexRows
                            IndexLookups       = "{0:N0}" -f $detail.IndexLookups
                            MostRecentlyUsed   = $recentlyused
                            StatsSampleRows    = "{0:N0}" -f $detail.StatsSampleRows
                            StatsRowMods       = "{0:N0}" -f $detail.StatsRowMods
                            HistogramSteps     = $detail.HistogramSteps
                            StatsLastUpdated   = $detail.StatsLastUpdated
                            IndexFragInPercent = "{0:F2}" -f $detail.IndexFragInPercent
                        }
                    }
                }

                else {
                    foreach ($detail in $IndexDetails) {
                        $recentlyused = [datetime]$detail.MostRecentlyUsed

                        if ($recentlyused.year -eq 1900) {
                            $recentlyused = $null
                        }

                        [pscustomobject]@{
                            ComputerName       = $server.ComputerName
                            InstanceName       = $server.ServiceName
                            SqlInstance        = $server.DomainInstanceName
                            Database           = $db.Name
                            Object             = $detail.FullObjectName
                            Index              = $detail.IndexName
                            IndexType          = $detail.IndexType
                            Statistics         = $detail.StatisticsName
                            KeyColumns         = $detail.KeyColumns
                            IncludeColumns     = $detail.IncludeColumns
                            FilterDefinition   = $detail.FilterDefinition
                            DataCompression    = $detail.DataCompression
                            IndexReads         = $detail.IndexReads
                            IndexUpdates       = $detail.IndexUpdates
                            Size               = [dbasize]($detail.SizeKB * 1024)
                            IndexRows          = $detail.IndexRows
                            IndexLookups       = $detail.IndexLookups
                            MostRecentlyUsed   = $recentlyused
                            StatsSampleRows    = $detail.StatsSampleRows
                            StatsRowMods       = $detail.StatsRowMods
                            HistogramSteps     = $detail.HistogramSteps
                            StatsLastUpdated   = $detail.StatsLastUpdated
                            IndexFragInPercent = $detail.IndexFragInPercent
                        }
                    }
                }
            } catch {
                Stop-Function -Continue -ErrorRecord $_ -Message "Cannot process $db on $server"
            }
        }
    }
}

tools\dbatools\functions\Get-DbaInstanceProperty.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaInstanceProperty {
    <#
    .SYNOPSIS
        Gets SQL Server instance properties of one or more instance(s) of SQL Server.

    .DESCRIPTION
        The Get-DbaInstanceProperty command gets SQL Server instance properties from the SMO object sqlserver.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER InstanceProperty
        SQL Server instance property(ies) to include.

    .PARAMETER ExcludeInstanceProperty
        SQL Server instance property(ies) to exclude.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Instance, Configure, Configuration
        Author: Klaas Vandenberghe (@powerdbaklaas)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaInstanceProperty

    .EXAMPLE
        PS C:\> Get-DbaInstanceProperty -SqlInstance localhost

        Returns SQL Server instance properties on the local default SQL Server instance

    .EXAMPLE
        PS C:\> Get-DbaInstanceProperty -SqlInstance sql2, sql4\sqlexpress

        Returns SQL Server instance properties on default instance on sql2 and sqlexpress instance on sql4

    .EXAMPLE
        PS C:\> 'sql2','sql4' | Get-DbaInstanceProperty

        Returns SQL Server instance properties on sql2 and sql4

    .EXAMPLE
        PS C:\> Get-DbaInstanceProperty -SqlInstance sql2,sql4 -InstanceProperty DefaultFile

        Returns SQL Server instance property DefaultFile on instance sql2 and sql4

    .EXAMPLE
        PS C:\> Get-DbaInstanceProperty -SqlInstance sql2,sql4 -ExcludeInstanceProperty DefaultFile

        Returns all SQL Server instance properties except DefaultFile on instance sql2 and sql4

    .EXAMPLE
        PS C:\> $cred = Get-Credential sqladmin
        PS C:\> Get-DbaInstanceProperty -SqlInstance sql2 -SqlCredential $cred

        Connects using sqladmin credential and returns SQL Server instance properties from sql2

    #>
    [CmdletBinding(DefaultParameterSetName = "Default")]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [object[]]$InstanceProperty,
        [object[]]$ExcludeInstanceProperty,
        [Alias('Silent')]
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            try {
                $infoProperties = $server.Information.Properties

                if ($InstanceProperty) {
                    $infoProperties = $infoProperties | Where-Object Name -In $InstanceProperty
                }
                if ($ExcludeInstanceProperty) {
                    $infoProperties = $infoProperties | Where-Object Name -NotIn $ExcludeInstanceProperty
                }
                foreach ($prop in $infoProperties) {
                    Add-Member -Force -InputObject $prop -MemberType NoteProperty -Name ComputerName -Value $server.ComputerName
                    Add-Member -Force -InputObject $prop -MemberType NoteProperty -Name InstanceName -Value $server.ServiceName
                    Add-Member -Force -InputObject $prop -MemberType NoteProperty -Name SqlInstance -Value $server.DomainInstanceName
                    Add-Member -Force -InputObject $prop -MemberType NoteProperty -Name PropertyType -Value 'Information'
                    Select-DefaultView -InputObject $prop -Property ComputerName, InstanceName, SqlInstance, Name, Value, PropertyType
                }
            } catch {
                Stop-Function -Message "Issue gathering information properties for $instance." -Target $instance -ErrorRecord $_ -Continue
            }

            try {
                $userProperties = $server.UserOptions.Properties

                if ($InstanceProperty) {
                    $userProperties = $userProperties | Where-Object Name -In $InstanceProperty
                }
                if ($ExcludeInstanceProperty) {
                    $userProperties = $userProperties | Where-Object Name -NotIn $ExcludeInstanceProperty
                }
                foreach ($prop in $userProperties) {
                    Add-Member -Force -InputObject $prop -MemberType NoteProperty -Name ComputerName -Value $server.ComputerName
                    Add-Member -Force -InputObject $prop -MemberType NoteProperty -Name InstanceName -Value $server.ServiceName
                    Add-Member -Force -InputObject $prop -MemberType NoteProperty -Name SqlInstance -Value $server.DomainInstanceName
                    Add-Member -Force -InputObject $prop -MemberType NoteProperty -Name PropertyType -Value 'UserOption'
                    Select-DefaultView -InputObject $prop -Property ComputerName, InstanceName, SqlInstance, Name, Value, PropertyType
                }
            } catch {
                Stop-Function -Message "Issue gathering user options for $instance." -Target $instance -ErrorRecord $_ -Continue
            }

            try {
                $settingProperties = $server.Settings.Properties

                if ($InstanceProperty) {
                    $settingProperties = $settingProperties | Where-Object Name -In $InstanceProperty
                }
                if ($ExcludeInstanceProperty) {
                    $settingProperties = $settingProperties | Where-Object Name -NotIn $ExcludeInstanceProperty
                }
                foreach ($prop in $settingProperties) {
                    Add-Member -Force -InputObject $prop -MemberType NoteProperty -Name ComputerName -Value $server.ComputerName
                    Add-Member -Force -InputObject $prop -MemberType NoteProperty -Name InstanceName -Value $server.ServiceName
                    Add-Member -Force -InputObject $prop -MemberType NoteProperty -Name SqlInstance -Value $server.DomainInstanceName
                    Add-Member -Force -InputObject $prop -MemberType NoteProperty -Name PropertyType -Value 'Setting'
                    Select-DefaultView -InputObject $prop -Property ComputerName, InstanceName, SqlInstance, Name, Value, PropertyType
                }
            } catch {
                Stop-Function -Message "Issue gathering settings for $instance." -Target $instance -ErrorRecord $_ -Continue
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Get-DbaSqlInstanceProperty
    }
}

tools\dbatools\functions\Get-DbaInstanceUserOption.ps1

function Get-DbaInstanceUserOption {
    <#
    .SYNOPSIS
        Gets SQL Instance user options of one or more instance(s) of SQL Server.

    .DESCRIPTION
        The Get-DbaInstanceUserOption command gets SQL Instance user options from the SMO object sqlserver.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.
        This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Instance, Configure, UserOption
        Author: Klaas Vandenberghe (@powerdbaklaas)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaInstanceUserOption

    .EXAMPLE
        PS C:\> Get-DbaInstanceUserOption -SqlInstance localhost

        Returns SQL Instance user options on the local default SQL Server instance

    .EXAMPLE
        PS C:\> Get-DbaInstanceUserOption -SqlInstance sql2, sql4\sqlexpress

        Returns SQL Instance user options on default instance on sql2 and sqlexpress instance on sql4

    .EXAMPLE
        PS C:\> 'sql2','sql4' | Get-DbaInstanceUserOption

        Returns SQL Instance user options on sql2 and sql4

    #>
    [CmdletBinding(DefaultParameterSetName = "Default")]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }
            $props = $server.useroptions.properties
            foreach ($prop in $props) {
                Add-Member -Force -InputObject $prop -MemberType NoteProperty -Name ComputerName -Value $server.ComputerName
                Add-Member -Force -InputObject $prop -MemberType NoteProperty -Name InstanceName -Value $server.ServiceName
                Add-Member -Force -InputObject $prop -MemberType NoteProperty -Name SqlInstance -Value $server.DomainInstanceName
                Select-DefaultView -InputObject $prop -Property ComputerName, InstanceName, SqlInstance, Name, Value
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Get-DbaSqlInstanceUserOption
    }
}

tools\dbatools\functions\Get-DbaIoLatency.ps1

function Get-DbaIoLatency {
    <#
    .SYNOPSIS
        Displays IO subsystem latency statistics from sys.dm_io_virtual_file_stats.  Works on SQL Server 2005 and above.

    .DESCRIPTION
        This command is based off of Paul Randal's post "Advanced SQL Server performance tuning"

        Returns both raw and aggregate information

        Reference:  https://www.sqlskills.com/blogs/paul/how-to-examine-io-subsystem-latencies-from-within-sql-server/
                    https://www.sqlskills.com/blogs/paul/capturing-io-latencies-period-time/

    .PARAMETER SqlInstance
        The SQL Server instance. Server version must be SQL Server version 2008 or higher.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: IOLatency
        Author: Patrick Flynn (@sqllensman)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaIoLatency

    .EXAMPLE
        PS C:\> Get-DbaIoLatency -SqlInstance sql2008, sqlserver2012

        Get IO subsystem latency statistics for servers sql2008 and sqlserver2012.

    .EXAMPLE
        PS C:\> $output = Get-DbaIoLatency -SqlInstance sql2008 | Select * | ConvertTo-DbaDataTable

        Collects all IO subsystem latency statistics on server sql2008 into a Data Table.

    .EXAMPLE
        PS C:\> 'sql2008','sqlserver2012' | Get-DbaIoLatency

        Get IO subsystem latency statistics for servers sql2008 and sqlserver2012 via pipline

    .EXAMPLE
        PS C:\> $cred = Get-Credential sqladmin
        PS C:\> Get-DbaIoLatency -SqlInstance sql2008 -SqlCredential $cred

        Connects using sqladmin credential and returns IO subsystem latency statistics from sql2008
    #>
    [CmdletBinding()]
    Param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "SqlServers")]
        [DbaInstance[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias('Silent')]
        [switch]$EnableException
    )

    BEGIN {
        $sql = "SELECT
            [vfs].[database_id],
            DB_NAME ([vfs].[database_id]) AS [DatabaseName],
            [vfs].[file_id],
            [mf].[physical_name],
            [num_of_reads],
            [io_stall_read_ms],
            [num_of_writes],
            [io_stall_write_ms],
            [io_stall],
            [num_of_bytes_read],
            [num_of_bytes_written],
            [sample_ms],
            [size_on_disk_bytes],
            [file_handle],
            [ReadLatency] =
            CASE WHEN [num_of_reads] = 0
                THEN 0
                ELSE ([io_stall_read_ms] / [num_of_reads])
            END,
            [WriteLatency] =
                CASE WHEN [num_of_writes] = 0
                    THEN 0
                    ELSE ([io_stall_write_ms] / [num_of_writes])
                END,
            [Latency] =
                CASE WHEN ([num_of_reads] = 0 AND [num_of_writes] = 0)
                    THEN 0
                    ELSE ([io_stall] / ([num_of_reads] + [num_of_writes]))
                END,
            [AvgBPerRead] =
                CASE WHEN [num_of_reads] = 0
                    THEN 0
                    ELSE ([num_of_bytes_read] / [num_of_reads])
                END,
            [AvgBPerWrite] =
                CASE WHEN [num_of_writes] = 0
                    THEN 0
                    ELSE ([num_of_bytes_written] / [num_of_writes])
                END,
            [AvgBPerTransfer] =
                CASE WHEN ([num_of_reads] = 0 AND [num_of_writes] = 0)
                    THEN 0
                    ELSE
                        (([num_of_bytes_read] + [num_of_bytes_written]) /
                        ([num_of_reads] + [num_of_writes]))
                    END
        FROM sys.dm_io_virtual_file_stats (NULL,NULL) AS [vfs]
        INNER JOIN sys.master_files AS [mf]
            ON [vfs].[database_id] = [mf].[database_id]
            AND [vfs].[file_id] = [mf].[file_id];"

        Write-Message -Level Debug -Message $sql

        $excludeColumns = 'FileHandle', 'ReadLatency', 'WriteLatency', 'Latency', 'AvgBPerRead', 'AvgBPerWrite', 'AvgBPerTransfer'
    }
    process {
        if (Test-FunctionInterrupt) { return }
        foreach ($instance in $SqlInstance) {
            if (Test-FunctionInterrupt) { return }

            Write-Message -Level Verbose -Message "Connecting to $instance"

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }
            Write-Message -Level Verbose -Message "Connected to $instance"

            foreach ($row in $server.Query($sql)) {
                [PSCustomObject]@{
                    ComputerName         = $server.NetName
                    InstanceName         = $server.ServiceName
                    SqlInstance          = $server.DomainInstanceName
                    DatabaseId           = $row.database_id
                    DatabaseName         = $row.DatabaseName
                    FileId               = $row.file_id
                    PhysicalName         = $row.physical_name
                    NumberOfReads        = $row.num_of_reads
                    IoStallRead          = $row.io_stall_read_ms
                    NumberOfwrites       = $row.num_of_writes
                    IoStallWrite         = $row.io_stall_write_ms
                    IoStall              = $row.io_stall
                    NumberOfBytesRead    = $row.num_of_bytes_read
                    NumberOfBytesWritten = $row.num_of_bytes_written
                    SampleMilliseconds   = $row.sample_ms
                    SizeOnDiskBytes      = $row.num_of_bytes_written
                    FileHandle           = $row.file_handle
                    ReadLatency          = $row.ReadLatency
                    WriteLatency         = $row.WriteLatency
                    Latency              = $row.Latency
                    AvgBPerRead          = $row.AvgBPerRead
                    AvgBPerWrite         = $row.AvgBPerWrite
                    AvgBPerTransfer      = $row.AvgBPerTransfer
                } | Select-DefaultView -ExcludeProperty $excludeColumns
            }
        }
    }
}

tools\dbatools\functions\Get-DbaLastBackup.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaLastBackup {
    <#
    .SYNOPSIS
        Get date/time for last known backups of databases.

    .DESCRIPTION
        Retrieves and compares the date/time for the last known backups, as well as the creation date/time for the database.

        Default output includes columns Server, Database, RecoveryModel, LastFullBackup, LastDiffBackup, LastLogBackup, SinceFull, SinceDiff, SinceLog, Status, DatabaseCreated, DaysSinceDbCreated.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        Specifies one or more database(s) to process. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        Specifies one or more database(s) to exclude from processing.

    .PARAMETER EnableException
        If this switch is enabled exceptions will be thrown to the caller, which will need to perform its own exception processing. Otherwise, the function will try to catch the exception, interpret it and provide a friendly error message.

    .NOTES
        Tags: DisasterRecovery, Backup
        Author: Klaas Vandenberghe (@PowerDBAKlaas)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaLastBackup

    .EXAMPLE
        PS C:\> Get-DbaLastBackup -SqlInstance ServerA\sql987

        Returns a custom object displaying Server, Database, RecoveryModel, LastFullBackup, LastDiffBackup, LastLogBackup, SinceFull, SinceDiff, SinceLog, Status, DatabaseCreated, DaysSinceDbCreated

    .EXAMPLE
        PS C:\> Get-DbaLastBackup -SqlInstance ServerA\sql987

        Returns a custom object with Server name, Database name, and the date the last time backups were performed.

    .EXAMPLE
        PS C:\> Get-DbaLastBackup -SqlInstance ServerA\sql987 | Select *

        Returns a custom object with Server name, Database name, and the date the last time backups were performed, and also recoverymodel and calculations on how long ago backups were taken and what the status is.

    .EXAMPLE
        PS C:\> Get-DbaLastBackup -SqlInstance ServerA\sql987 | Select * | Out-Gridview

        Returns a gridview displaying Server, Database, RecoveryModel, LastFullBackup, LastDiffBackup, LastLogBackup, SinceFull, SinceDiff, SinceLog, Status, DatabaseCreated, DaysSinceDbCreated.

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]
        $SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {
        function Get-DbaDateOrNull ($TimeSpan) {
            if ($TimeSpan -eq 0) {
                return $null
            }
            return $TimeSpan
        }
        $StartOfTime = [DbaTimeSpan](New-TimeSpan -Start ([datetime]0))
    }
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $dbs = $server.Databases | Where-Object { $_.name -ne 'tempdb' }

            if ($Database) {
                $dbs = $dbs | Where-Object Name -In $Database
            }

            if ($ExcludeDatabase) {
                $dbs = $dbs | Where-Object Name -NotIn $ExcludeDatabase
            }
            # Get-DbaBackupHistory -Last would make the job in one query but SMO's (and this) report the last backup of this type irregardless of the chain
            $FullHistory = Get-DbaBackupHistory -SqlInstance $server -Database $dbs.Name -LastFull -IncludeCopyOnly -Raw
            $DiffHistory = Get-DbaBackupHistory -SqlInstance $server -Database $dbs.Name -LastDiff -IncludeCopyOnly -Raw
            $IncrHistory = Get-DbaBackupHistory -SqlInstance $server -Database $dbs.Name -LastLog -IncludeCopyOnly -Raw
            foreach ($db in $dbs) {
                Write-Message -Level Verbose -Message "Processing $db on $instance"

                if ($db.IsAccessible -eq $false) {
                    Write-Message -Level Warning -Message "The database $db on server $instance is not accessible. Skipping database."
                    Continue
                }
                $LastFullBackup = ($FullHistory | Where-Object Database -eq $db.Name | Sort-Object -Property End -Descending | Select-Object -First 1).End
                if ($null -ne $LastFullBackup) {
                    $SinceFull_ = [DbaTimeSpan](New-TimeSpan -Start $LastFullBackup)
                } else {
                    $SinceFull_ = $StartOfTime
                }

                $LastDiffBackup = ($DiffHistory | Where-Object Database -eq $db.Name | Sort-Object -Property End -Descending | Select-Object -First 1).End
                if ($null -ne $LastDiffBackup) {
                    $SinceDiff_ = [DbaTimeSpan](New-TimeSpan -Start $LastDiffBackup)
                } else {
                    $SinceDiff_ = $StartOfTime
                }

                $LastIncrBackup = ($IncrHistory | Where-Object Database -eq $db.Name | Sort-Object -Property End -Descending | Select-Object -First 1).End
                if ($null -ne $LastIncrBackup) {
                    $SinceLog_ = [DbaTimeSpan](New-TimeSpan -Start $LastIncrBackup)
                } else {
                    $SinceLog_ = $StartOfTime
                }

                $daysSinceDbCreated = (New-TimeSpan -Start $db.createDate).Days

                if ($daysSinceDbCreated -lt 1 -and $SinceFull_ -eq 0) {
                    $Status = 'New database, not backed up yet'
                } elseif ($SinceFull_.Days -gt 0 -and $SinceDiff_.Days -gt 0) {
                    $Status = 'No Full or Diff Back Up in the last day'
                } elseif ($db.RecoveryModel -eq "Full" -and $SinceLog_.Hours -gt 0) {
                    $Status = 'No Log Back Up in the last hour'
                } else {
                    $Status = 'OK'
                }

                $result = [PSCustomObject]@{
                    ComputerName       = $server.ComputerName
                    InstanceName       = $server.ServiceName
                    SqlInstance        = $server.DomainInstanceName
                    Database           = $db.Name
                    RecoveryModel      = $db.RecoveryModel
                    LastFullBackup     = [DbaDateTime]$LastFullBackup
                    LastDiffBackup     = [DbaDateTime]$LastDiffBackup
                    LastLogBackup      = [DbaDateTime]$LastIncrBackup
                    SinceFull          = Get-DbaDateOrNull -TimeSpan $SinceFull_
                    SinceDiff          = Get-DbaDateOrNull -TimeSpan $SinceDiff_
                    SinceLog           = Get-DbaDateOrNull -TimeSpan $SinceLog_
                    DatabaseCreated    = $db.createDate
                    DaysSinceDbCreated = $daysSinceDbCreated
                    Status             = $status
                }
                Select-DefaultView -InputObject $result -Property ComputerName, InstanceName, SqlInstance, Database, LastFullBackup, LastDiffBackup, LastLogBackup
            }
        }
    }
}

tools\dbatools\functions\Get-DbaLastGoodCheckDb.ps1

function Get-DbaLastGoodCheckDb {
    <#
    .SYNOPSIS
        Get date/time for last known good DBCC CHECKDB

    .DESCRIPTION
        Retrieves and compares the date/time for the last known good DBCC CHECKDB, as well as the creation date/time for the database.

        This function supports SQL Server 2005 and higher.

        Please note that this script uses the DBCC DBINFO() WITH TABLERESULTS. DBCC DBINFO has several known weak points, such as:
        - DBCC DBINFO is an undocumented feature/command.
        - The LastKnowGood timestamp is updated when a DBCC CHECKFILEGROUP is performed.
        - The LastKnowGood timestamp is updated when a DBCC CHECKDB WITH PHYSICAL_ONLY is performed.
        - The LastKnowGood timestamp does not get updated when a database in READ_ONLY.

        An empty ($null) LastGoodCheckDb result indicates that a good DBCC CHECKDB has never been performed.

        SQL Server 2008R2 has a "bug" that causes each databases to possess two dbi_dbccLastKnownGood fields, instead of the normal one.

        This script will only display this function to only display the newest timestamp. If -Verbose is specified, the function will announce every time more than one dbi_dbccLastKnownGood fields is encountered.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. Defaults to localhost.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        Specifies one or more database(s) to process. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        Specifies one or more database(s) to exclude from processing.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: CHECKDB, Database
        Author: Jakob Bindslet ([email protected])

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        Ref:
        DBCC CHECKDB:
        https://msdn.microsoft.com/en-us/library/ms176064.aspx
        http://www.sqlcopilot.com/dbcc-checkdb.html
        Data Purity:
        http://www.sqlskills.com/blogs/paul/checkdb-from-every-angle-how-to-tell-if-data-purity-checks-will-be-run/
        https://www.mssqltips.com/sqlservertip/1988/ensure-sql-server-data-purity-checks-are-performed/

    .LINK
        https://dbatools.io/Get-DbaLastGoodCheckDb

    .EXAMPLE
        PS C:\> Get-DbaLastGoodCheckDb -SqlInstance ServerA\sql987

        Returns a custom object displaying Server, Database, DatabaseCreated, LastGoodCheckDb, DaysSinceDbCreated, DaysSinceLastGoodCheckDb, Status and DataPurityEnabled

    .EXAMPLE
        PS C:\> Get-DbaLastGoodCheckDb -SqlInstance ServerA\sql987 -SqlCredential sqladmin | Format-Table -AutoSize

        Returns a formatted table displaying Server, Database, DatabaseCreated, LastGoodCheckDb, DaysSinceDbCreated, DaysSinceLastGoodCheckDb, Status and DataPurityEnabled. Authenticates using SQL Server authentication.

    .EXAMPLE
        PS C:\> Get-DbaLastGoodCheckDb -SqlInstance sql2016 -ExcludeDatabase "TempDB" | Format-Table -AutoSize

        Returns a formatted table displaying Server, Database, DatabaseCreated, LastGoodCheckDb, DaysSinceDbCreated, DaysSinceLastGoodCheckDb, Status and DataPurityEnabled. All databases except for "TempDB" will be displayed in the output.

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [Alias('Silent')]
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            if ($server.versionMajor -lt 9) {
                Stop-Function -Message "Get-DbaLastGoodCheckDb is only supported on SQL Server 2005 and above. Skipping Instance." -Continue -Target $instance
            }

            $dbs = $server.Databases

            if ($Database) {
                $dbs = $dbs | Where-Object Name -In $Database
            }

            if ($ExcludeDatabase) {
                $dbs = $dbs | Where-Object Name -NotIn $ExcludeDatabase
            }

            foreach ($db in $dbs) {
                Write-Message -Level Verbose -Message "Processing $db on $instances."

                if ($db.IsAccessible -eq $false) {
                    Stop-Function -Message "The database $db is not accessible. Skipping database." -Continue -Target $db
                }

                $sql = "DBCC DBINFO ([$($db.name)]) WITH TABLERESULTS"
                Write-Message -Level Debug -Message "T-SQL: $sql"

                $resultTable = $db.ExecuteWithResults($sql).Tables[0]
                [datetime[]]$lastKnownGoodArray = $resultTable | Where-Object Field -eq 'dbi_dbccLastKnownGood' | Select-Object -ExpandProperty Value

                ## look for databases with two or more occurrences of the field dbi_dbccLastKnownGood
                if ($lastKnownGoodArray.count -ge 2) {
                    Write-Message -Level Verbose -Message "The database $db has $($lastKnownGoodArray.count) dbi_dbccLastKnownGood fields. This script will only use the newest!"
                }
                [datetime]$lastKnownGood = $lastKnownGoodArray | Sort-Object -Descending | Select-Object -First 1

                [int]$createVersion = ($resultTable | Where-Object Field -eq 'dbi_createVersion').Value
                [int]$dbccFlags = ($resultTable | Where-Object Field -eq 'dbi_dbccFlags').Value

                if (($createVersion -lt 611) -and ($dbccFlags -eq 0)) {
                    $dataPurityEnabled = $false
                } else {
                    $dataPurityEnabled = $true
                }

                $daysSinceCheckDb = (New-TimeSpan -Start $lastKnownGood -End (Get-Date)).Days
                $daysSinceDbCreated = (New-TimeSpan -Start $db.createDate -End (Get-Date)).TotalDays

                if ($daysSinceCheckDb -lt 7) {
                    $Status = 'Ok'
                } elseif ($daysSinceDbCreated -lt 7) {
                    $Status = 'New database, not checked yet'
                } else {
                    $Status = 'CheckDB should be performed'
                }

                if ($lastKnownGood -eq '1/1/1900 12:00:00 AM') {
                    Remove-Variable -Name lastKnownGood, daysSinceCheckDb
                }

                [PSCustomObject]@{
                    ComputerName             = $server.ComputerName
                    InstanceName             = $server.ServiceName
                    SqlInstance              = $server.DomainInstanceName
                    Database                 = $db.name
                    DatabaseCreated          = $db.createDate
                    LastGoodCheckDb          = $lastKnownGood
                    DaysSinceDbCreated       = $daysSinceDbCreated
                    DaysSinceLastGoodCheckDb = $daysSinceCheckDb
                    Status                   = $status
                    DataPurityEnabled        = $dataPurityEnabled
                    CreateVersion            = $createVersion
                    DbccFlags                = $dbccFlags
                }
            }
        }
    }
}

tools\dbatools\functions\Get-DbaLatchStatistic.ps1

function Get-DbaLatchStatistic {
    <#
    .SYNOPSIS
        Displays latch statistics from sys.dm_os_latch_stats

    .DESCRIPTION
        This command is based off of Paul Randal's post "Advanced SQL Server performance tuning"

        Returns:
                LatchClass
                WaitSeconds
                WaitCount
                Percentage
                AverageWaitSeconds
                URL

        Reference:  https://www.sqlskills.com/blogs/paul/advanced-performance-troubleshooting-waits-latches-spinlocks/
                    https://www.sqlskills.com/blogs/paul/most-common-latch-classes-and-what-they-mean/

    .PARAMETER SqlInstance
        The SQL Server instance. Server version must be SQL Server version 2005 or higher.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Threshold
        Threshold, in percentage of all latch stats on the system. Default per Paul's post is 95%.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: LatchStatistics, Waits
        Author: Patrick Flynn (@sqllensman)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaLatchStatistic

    .EXAMPLE
        PS C:\> Get-DbaLatchStatistic -SqlInstance sql2008, sqlserver2012

        Check latch statistics for servers sql2008 and sqlserver2012

    .EXAMPLE
        PS C:\> Get-DbaLatchStatistic -SqlInstance sql2008 -Threshold 98

        Check latch statistics on server sql2008 for thresholds above 98%

    .EXAMPLE
        PS C:\> $output = Get-DbaLatchStatistic -SqlInstance sql2008 -Threshold 100 | Select * | ConvertTo-DbaDataTable

        Collects all latch statistics on server sql2008 into a Data Table.

    .EXAMPLE
        PS C:\> 'sql2008','sqlserver2012' | Get-DbaLatchStatistic

        Get latch statistics for servers sql2008 and sqlserver2012 via pipline

    .EXAMPLE
        PS C:\> $cred = Get-Credential sqladmin
        PS C:\> Get-DbaLatchStatistic -SqlInstance sql2008 -SqlCredential $cred

        Connects using sqladmin credential and returns latch statistics from sql2008

    .EXAMPLE
        PS C:\> $output = Get-DbaLatchStatistic -SqlInstance sql2008
        PS C:\> $output
        PS C:\> foreach ($row in ($output | Sort-Object -Unique Url)) { Start-Process ($row).Url }

        Displays the output then loads the associated sqlskills website for each result. Opens one tab per unique URL.
    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "SqlServers")]
        [DbaInstance[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [int]$Threshold = 95,
        [Alias('Silent')]
        [switch]$EnableException
    )

    BEGIN {
        $sql = "WITH [Latches] AS
               (
                   SELECT
                       [latch_class],
                       [wait_time_ms] / 1000.0 AS [WaitS],
                       [waiting_requests_count] AS [WaitCount],
                       Case WHEN SUM ([wait_time_ms]) OVER() = 0 THEN NULL ELSE 100.0 * [wait_time_ms] / SUM ([wait_time_ms]) OVER() END AS [Percentage],
                       ROW_NUMBER() OVER(ORDER BY [wait_time_ms] DESC) AS [RowNum]
                   FROM sys.dm_os_latch_stats
                   WHERE [latch_class] NOT IN (N'BUFFER')
               )
               SELECT
                   MAX ([W1].[latch_class]) AS [LatchClass],
                   CAST (MAX ([W1].[WaitS]) AS DECIMAL(14, 2)) AS [WaitSeconds],
                   MAX ([W1].[WaitCount]) AS [WaitCount],
                   CAST (MAX ([W1].[Percentage]) AS DECIMAL(14, 2)) AS [Percentage],
                   CAST ((MAX ([W1].[WaitS]) / MAX ([W1].[WaitCount])) AS DECIMAL (14, 4)) AS [AvgWaitSeconds],
                   CAST ('https://www.sqlskills.com/help/latches/' + MAX ([W1].[latch_class]) as XML) AS [URL]
               FROM [Latches] AS [W1]
               INNER JOIN [Latches] AS [W2]
                   ON [W2].[RowNum] <= [W1].[RowNum]
               GROUP BY [W1].[RowNum]
               HAVING SUM ([W2].[Percentage]) - MAX ([W1].[Percentage]) < $Threshold;"

        Write-Message -Level Debug -Message $sql
    }
    process {
        if (Test-FunctionInterrupt) { return }
        foreach ($instance in $SqlInstance) {
            Write-Message -Level Verbose -Message "Connecting to $instance"
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
                Return
            }
            Write-Message -Level Verbose -Message "Connected to $instance"

            foreach ($row in $server.Query($sql)) {
                [PSCustomObject]@{
                    ComputerName       = $server.NetName
                    InstanceName       = $server.ServiceName
                    SqlInstance        = $server.DomainInstanceName
                    WaitType           = $row.LatchClass
                    WaitSeconds        = $row.WaitSeconds
                    WaitCount          = $row.WaitCount
                    Percentage         = $row.Percentage
                    AverageWaitSeconds = $row.AvgWaitSeconds
                    URL                = $row.URL
                }
            }
        }
    }
}

tools\dbatools\functions\Get-DbaLinkedServer.ps1

function Get-DbaLinkedServer {
    <#
    .SYNOPSIS
        Gets all linked servers and a summary of information from the linked servers listed.

    .DESCRIPTION
        Retrieves information about each linked server on the instance(s).

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function
        to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER LinkedServer
        The linked server(s) to process - this list is auto-populated from the server. If unspecified, all linked servers will be processed.

    .PARAMETER ExcludeLinkedServer
        The linked server(s) to exclude - this list is auto-populated from the server

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: LinkedServer, Linked
        Author: Stephen Bennett, https://sqlnotesfromtheunderground.wordpress.com/

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaLinkedServer

    .EXAMPLE
        PS C:\> Get-DbaLinkedServer -SqlInstance DEV01

        Returns all linked servers for the SQL Server instance DEV01

    .EXAMPLE
        PS C:\> Get-DbaCmsRegServer -SqlInstance DEV01 -Group SQLDEV | Get-DbaLinkedServer | Out-GridView

        Returns all linked servers for a group of servers from SQL Server Central Management Server (CMS). Send output to GridView.
    #>
    [CmdletBinding(DefaultParameterSetName = 'Default')]
    param (
        [Parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstance[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [object[]]$LinkedServer,
        [object[]]$ExcludeLinkedServer,
        [Alias('Silent')]
        [switch]$EnableException
    )
    process {
        foreach ($Instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $lservers = $server.LinkedServers

            if ($LinkedServer) {
                $lservers = $lservers | Where-Object { $_.Name -in $LinkedServer }
            }
            if ($ExcludeLinkedServer) {
                $lservers = $lservers | Where-Object { $_.Name -notin $ExcludeLinkedServer }
            }

            foreach ($ls in $lservers) {
                Add-Member -Force -InputObject $ls -MemberType NoteProperty -Name ComputerName -value $server.ComputerName
                Add-Member -Force -InputObject $ls -MemberType NoteProperty -Name InstanceName -value $server.ServiceName
                Add-Member -Force -InputObject $ls -MemberType NoteProperty -Name SqlInstance -value $server.DomainInstanceName
                Add-Member -Force -InputObject $ls -MemberType NoteProperty -Name Impersonate -value $ls.LinkedServerLogins.Impersonate
                Add-Member -Force -InputObject $ls -MemberType NoteProperty -Name RemoteUser -value $ls.LinkedServerLogins.RemoteUser

                Select-DefaultView -InputObject $ls -Property ComputerName, InstanceName, SqlInstance, Name, 'DataSource as RemoteServer', ProductName, Impersonate, RemoteUser, 'DistPublisher as Publisher', Distributor, DateLastModified
            }
        }
    }
}

tools\dbatools\functions\Get-DbaLocaleSetting.ps1

function Get-DbaLocaleSetting {
    <#
    .SYNOPSIS
        Gets the Locale settings on a computer.

    .DESCRIPTION
        Gets the Locale settings on one or more computers.

        Requires Local Admin rights on destination computer(s).

    .PARAMETER ComputerName
        The target SQL Server instance or instances.

    .PARAMETER Credential
        Credential object used to connect to the computer as a different user.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: OS
        Author: Klaas Vandenberghe (@PowerDBAKlaas)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaLocaleSetting

    .EXAMPLE
        PS C:\> Get-DbaLocaleSetting -ComputerName sqlserver2014a

        Gets the Locale settings on computer sqlserver2014a.

    .EXAMPLE
        PS C:\> 'sql1','sql2','sql3' | Get-DbaLocaleSetting

        Gets the Locale settings on computers sql1, sql2 and sql3.

    .EXAMPLE
        PS C:\> Get-DbaLocaleSetting -ComputerName sql1,sql2 -SqlCredential $credential | Out-Gridview

        Gets the Locale settings on computers sql1 and sql2 using SQL Authentication to authenticate to the servers, and shows them in a grid view.

    #>
    [CmdletBinding()]
    param (
        [parameter(ValueFromPipeline)]
        [Alias("cn", "host", "Server")]
        [string[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential] $Credential,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        $ComputerName = $ComputerName | ForEach-Object {$_.split("\")[0]} | Select-Object -Unique
        $sessionoption = New-CimSessionOption -Protocol DCom
        $keyname = "Control Panel\International"
        $NS = 'root\cimv2'
        $Reg = 'StdRegProv'
        [UInt32]$CIMHiveCU = 2147483649
    }
    process {
        # uses cim commands
        
        
        foreach ($computer in $ComputerName) {
            $props = @{ "ComputerName" = $computer }
            $Server = Resolve-DbaNetworkName -ComputerName $Computer -Credential $credential
            if ( $Server.FullComputerName ) {
                $Computer = $server.FullComputerName
                Write-Message -Level Verbose -Message "Creating CIMSession on $computer over WSMan"
                $CIMsession = New-CimSession -ComputerName $Computer -ErrorAction SilentlyContinue -Credential $Credential
                if ( -not $CIMSession ) {
                    Write-Message -Level Verbose -Message "Creating CIMSession on $computer over WSMan failed. Creating CIMSession on $computer over DCom"
                    $CIMsession = New-CimSession -ComputerName $Computer -SessionOption $sessionoption -ErrorAction SilentlyContinue -Credential $Credential
                }
                if ( $CIMSession ) {
                    Write-Message -Level Verbose -Message "Getting properties from Registry Key"
                    $PropNames = Invoke-CimMethod -CimSession $CIMsession -Namespace $NS -ClassName $Reg -MethodName enumvalues -Arguments @{hDefKey = $CIMHiveCU; sSubKeyName = $keyname} |
                        Select-Object -ExpandProperty snames

                    foreach ($Name in $PropNames) {
                        $sValue = Invoke-CimMethod -CimSession $CIMsession -Namespace $NS -ClassName $Reg -MethodName GetSTRINGvalue -Arguments @{hDefKey = $CIMHiveCU; sSubKeyName = $keyname; sValueName = $Name} |
                            Select-Object -ExpandProperty svalue
                        $props.add($Name, $sValue)
                    }
                    [PSCustomObject]$props
                } #if CIMSession
                else {
                    Write-Message -Level Warning -Message "Can't create CIMSession on $computer"
                }
            } #if computername
            else {
                Write-Message -Level Warning -Message "Can't connect to $computer"
            }
        } #foreach computer
    } #PROCESS
} #function

tools\dbatools\functions\Get-DbaLogin.ps1

function Get-DbaLogin {
    <#
    .SYNOPSIS
        Function to get an SMO login object of the logins for a given SQL Server instance. Takes a server object from the pipeline.

    .DESCRIPTION
        The Get-DbaLogin function returns an SMO Login object for the logins passed, if there are no users passed it will return all logins.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.You must have sysadmin access and server version must be SQL Server version 2000 or higher.

    .PARAMETER SqlCredential
        Allows you to login to servers using SQL Logins as opposed to Windows Auth/Integrated/Trusted.

    .PARAMETER Login
        The login(s) to process - this list is auto-populated from the server. If unspecified, all logins will be processed.

    .PARAMETER ExcludeLogin
        The login(s) to exclude - this list is auto-populated from the server

    .PARAMETER IncludeFilter
        A list of logins to include - accepts wildcard patterns

    .PARAMETER ExcludeFilter
        A list of logins to exclude - accepts wildcard patterns

    .PARAMETER ExcludeSystemLogin
        A Switch to remove System Logins from the output.

    .PARAMETER Type
        Filters logins by their type. Valid options are Windows and SQL.

    .PARAMETER Locked
        A Switch to return locked Logins.

    .PARAMETER Disabled
        A Switch to return disabled Logins.

    .PARAMETER SqlLogins
        Deprecated. Please use -Type SQL

    .PARAMETER WindowsLogins
        Deprecated. Please use -Type Windows.

    .PARAMETER HasAccess
        A Switch to return Logins that have access to the instance of SQL Server.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Login, Security
        Author: Mitchell Hamann (@SirCaptainMitch) | Rob Sewell (@SQLDBaWithBeard)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaLogin

    .EXAMPLE
        PS C:\> Get-DbaLogin -SqlInstance sql2016

        Gets all the logins from server sql2016 using NT authentication and returns the SMO login objects

    .EXAMPLE
        PS C:\> Get-DbaLogin -SqlInstance sql2016 -SqlCredential $sqlcred

        Gets all the logins for a given SQL Server using a passed credential object and returns the SMO login objects

    .EXAMPLE
        PS C:\> Get-DbaLogin -SqlInstance sql2016 -SqlCredential $sqlcred -Login dbatoolsuser,TheCaptain

        Get specific logins from server sql2016 returned as SMO login objects.

    .EXAMPLE
        PS C:\> Get-DbaLogin -SqlInstance sql2016 -IncludeFilter '##*','NT *'

        Get all user objects from server sql2016 beginning with '##' or 'NT ', returned as SMO login objects.

    .EXAMPLE
        PS C:\> Get-DbaLogin -SqlInstance sql2016 -ExcludeLogin dbatoolsuser

        Get all user objects from server sql2016 except the login dbatoolsuser, returned as SMO login objects.

    .EXAMPLE
        PS C:\> Get-DbaLogin -SqlInstance sql2016 -Type Windows

        Get all user objects from server sql2016 that are Windows Logins

    .EXAMPLE
        PS C:\> Get-DbaLogin -SqlInstance sql2016 -Type Windows -IncludeFilter *Rob*

        Get all user objects from server sql2016 that are Windows Logins and have Rob in the name

    .EXAMPLE
        PS C:\> Get-DbaLogin -SqlInstance sql2016 -Type SQL

        Get all user objects from server sql2016 that are SQL Logins

    .EXAMPLE
        PS C:\> Get-DbaLogin -SqlInstance sql2016 -Type SQL -IncludeFilter *Rob*

        Get all user objects from server sql2016 that are SQL Logins and have Rob in the name

    .EXAMPLE
        PS C:\> Get-DbaLogin -SqlInstance sql2016 -ExcludeSystemLogin

        Get all user objects from server sql2016 that are not system objects

    .EXAMPLE
        PS C:\> Get-DbaLogin -SqlInstance sql2016 -ExcludeFilter '##*','NT *'

        Get all user objects from server sql2016 except any beginning with '##' or 'NT ', returned as SMO login objects.

    .EXAMPLE
        PS C:\> 'sql2016', 'sql2014' | Get-DbaLogin -SqlCredential $sqlcred

        Using Get-DbaLogin on the pipeline, you can also specify which names you would like with -Login.

    .EXAMPLE
        PS C:\> 'sql2016', 'sql2014' | Get-DbaLogin -SqlCredential $sqlcred -Locked

        Using Get-DbaLogin on the pipeline to get all locked logins on servers sql2016 and sql2014.

    .EXAMPLE
        PS C:\> 'sql2016', 'sql2014' | Get-DbaLogin -SqlCredential $sqlcred -HasAccess -Disabled

        Using Get-DbaLogin on the pipeline to get all Disabled logins that have access on servers sql2016 or sql2014.

#>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [object[]]$Login,
        [object[]]$IncludeFilter,
        [object[]]$ExcludeLogin,
        [object[]]$ExcludeFilter,
        [Alias('ExcludeSystemLogins')]
        [switch]$ExcludeSystemLogin,
        [ValidateSet('Windows', 'SQL')]
        [string]$Type,
        [switch]$HasAccess,
        [switch]$SqlLogins,
        [switch]$WindowsLogins,
        [switch]$Locked,
        [switch]$Disabled,
        [switch]$EnableException
    )
    begin {
        Test-DbaDeprecation -DeprecatedOn 1.0.0 -Parameter SQLLogins
        Test-DbaDeprecation -DeprecatedOn 1.0.0 -Parameter WindowsLogins

        if ($SQLLogins) {
            $Type = "SQL"
        }
        if ($WindowsLogins) {
            $Type = "Windows"
        }
    }
    process {
        foreach ($instance in $SqlInstance) {

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $serverLogins = $server.Logins

            if ($Login) {
                $serverLogins = $serverLogins | Where-Object Name -in $Login
            }

            if ($ExcludeSystemLogin) {
                $serverLogins = $serverLogins | Where-Object IsSystemObject -eq $false
            }

            if ($Type -eq 'Windows') {
                $serverLogins = $serverLogins | Where-Object LoginType -eq 'WindowsUser'
            }

            if ($Type -eq 'SQL') {
                $serverLogins = $serverLogins | Where-Object LoginType -eq 'SqlLogin'
            }

            if ($IncludeFilter) {
                $serverLogins = $serverLogins | Where-Object {
                    foreach ($filter in $IncludeFilter) {
                        if ($_.Name -like $filter) {
                            return $true;
                        }
                    }
                }
            }

            if ($ExcludeLogin) {
                $serverLogins = $serverLogins | Where-Object Name -NotIn $ExcludeLogin
            }

            if ($ExcludeFilter) {
                foreach ($filter in $ExcludeFilter) {
                    $serverLogins = $serverLogins | Where-Object Name -NotLike $filter
                }
            }

            if ($HasAccess) {
                $serverLogins = $serverLogins | Where-Object HasAccess
            }

            if ($Locked) {
                $serverLogins = $serverLogins | Where-Object IsLocked
            }

            if ($Disabled) {
                $serverLogins = $serverLogins | Where-Object IsDisabled
            }

            foreach ($serverLogin in $serverlogins) {
                Write-Message -Level Verbose -Message "Processing $serverLogin on $instance"

                if ($server.VersionMajor -gt 9) {
                    # There's no reliable method to get last login time with SQL Server 2000, so only show on 2005+
                    Write-Message -Level Verbose -Message "Getting last login time"
                    $sql = "SELECT MAX(login_time) AS [login_time] FROM sys.dm_exec_sessions WHERE login_name = '$($serverLogin.name)'"
                    Add-Member -Force -InputObject $serverLogin -MemberType NoteProperty -Name LastLogin -Value $server.ConnectionContext.ExecuteScalar($sql)
                } else {
                    Add-Member -Force -InputObject $serverLogin -MemberType NoteProperty -Name LastLogin -Value $null
                }

                Add-Member -Force -InputObject $serverLogin -MemberType NoteProperty -Name ComputerName -Value $server.ComputerName
                Add-Member -Force -InputObject $serverLogin -MemberType NoteProperty -Name InstanceName -Value $server.ServiceName
                Add-Member -Force -InputObject $serverLogin -MemberType NoteProperty -Name SqlInstance -Value $server.DomainInstanceName

                Select-DefaultView -InputObject $serverLogin -Property ComputerName, InstanceName, SqlInstance, Name, LoginType, CreateDate, LastLogin, HasAccess, IsLocked, IsDisabled
            }
        }
    }
}

tools\dbatools\functions\Get-DbaMaintenanceSolutionLog.ps1

function Get-DbaMaintenanceSolutionLog {
    <#
    .SYNOPSIS
        Reads the log files generated by the IndexOptimize Agent Job from Ola Hallengren's MaintenanceSolution.

    .DESCRIPTION
        Ola wrote a .sql script to get the content from the commandLog table. However, if LogToTable='N', there will be no logging in that table. This function reads the text files that are written in the SQL Instance's Log directory.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER LogType
        Accepts 'IndexOptimize', 'DatabaseBackup', 'DatabaseIntegrityCheck'. ATM only IndexOptimize parsing is available

    .PARAMETER Since
        Consider only files generated since this date

    .PARAMETER Path
        Where to search for log files. By default it's the SQL instance errorlogpath path

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Ola, Maintenance
        Author: Klaas Vandenberghe (@powerdbaklaas) | Simone Bizzotto ( @niphlod )

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaMaintenanceSolutionLog

    .EXAMPLE
        PS C:\> Get-DbaMaintenanceSolutionLog -SqlInstance sqlserver2014a

        Gets the outcome of the IndexOptimize job on sql instance sqlserver2014a.

    .EXAMPLE
        PS C:\> Get-DbaMaintenanceSolutionLog -SqlInstance sqlserver2014a -SqlCredential $credential

        Gets the outcome of the IndexOptimize job on sqlserver2014a, using SQL Authentication.

    .EXAMPLE
        PS C:\> 'sqlserver2014a', 'sqlserver2020test' | Get-DbaMaintenanceSolutionLog

        Gets the outcome of the IndexOptimize job on sqlserver2014a and sqlserver2020test.

    .EXAMPLE
        PS C:\> Get-DbaMaintenanceSolutionLog -SqlInstance sqlserver2014a -Path 'D:\logs\maintenancesolution\'

        Gets the outcome of the IndexOptimize job on sqlserver2014a, reading the log files in their custom location.

    .EXAMPLE
        PS C:\> Get-DbaMaintenanceSolutionLog -SqlInstance sqlserver2014a -Since '2017-07-18'

        Gets the outcome of the IndexOptimize job on sqlserver2014a, starting from july 18, 2017.

    .EXAMPLE
        PS C:\> Get-DbaMaintenanceSolutionLog -SqlInstance sqlserver2014a -LogType IndexOptimize

        Gets the outcome of the IndexOptimize job on sqlserver2014a, the other options are not yet available! sorry

    #>
    [CmdletBinding(DefaultParameterSetName = "Default")]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseApprovedVerbs", "", Justification = "Internal functions are ignored")]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [ValidateSet('IndexOptimize', 'DatabaseBackup', 'DatabaseIntegrityCheck')]
        [string[]]$LogType = 'IndexOptimize',
        [datetime]$Since,
        [string]$Path,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {
        function process-block ($block) {
            $fresh = @{
                'ObjectType'     = $null
                'IndexType'      = $null
                'ImageText'      = $null
                'NewLOB'         = $null
                'FileStream'     = $null
                'ColumnStore'    = $null
                'AllowPageLocks' = $null
                'PageCount'      = $null
                'Fragmentation'  = $null
                'Error'          = $null
            }
            foreach ($l in $block) {
                $splitted = $l -split ': ', 2
                if (($splitted.Length -ne 2) -or ($splitted[0].length -gt 20)) {
                    if ($null -eq $fresh['Error']) {
                        $fresh['Error'] = New-Object System.Collections.ArrayList
                    }
                    $null = $fresh['Error'].Add($l)
                    continue
                }
                $k = $splitted[0]
                $v = $splitted[1]
                if ($k -eq 'Date and Time') {
                    # this is the end date, we already parsed the start date of the block
                    if ($fresh.ContainsKey($k)) {
                        continue
                    }
                }
                $fresh[$k] = $v
            }
            if ($fresh.ContainsKey('Command')) {
                if ($fresh['Command'] -match '(SET LOCK_TIMEOUT (?<timeout>\d+); )?ALTER INDEX \[(?<index>[^\]]+)\] ON \[(?<database>[^\]]+)\]\.\[(?<schema>[^]]+)\]\.\[(?<table>[^\]]+)\] (?<action>[^\ ]+)( PARTITION = (?<partition>\d+))? WITH \((?<options>[^\)]+)') {
                    $fresh['Index'] = $Matches.index
                    $fresh['Statistics'] = $null
                    $fresh['Schema'] = $Matches.Schema
                    $fresh['Table'] = $Matches.Table
                    $fresh['Action'] = $Matches.action
                    $fresh['Options'] = $Matches.options
                    $fresh['Timeout'] = $Matches.timeout
                    $fresh['Partition'] = $Matches.partition
                } elseif ($fresh['Command'] -match '(SET LOCK_TIMEOUT (?<timeout>\d+); )?UPDATE STATISTICS \[(?<database>[^\]]+)\]\.\[(?<schema>[^]]+)\]\.\[(?<table>[^\]]+)\] \[(?<stat>[^\]]+)\]') {
                    $fresh['Index'] = $null
                    $fresh['Statistics'] = $Matches.stat
                    $fresh['Schema'] = $Matches.Schema
                    $fresh['Table'] = $Matches.Table
                    $fresh['Action'] = $null
                    $fresh['Options'] = $null
                    $fresh['Timeout'] = $Matches.timeout
                    $fresh['Partition'] = $null
                }
            }
            if ($fresh.ContainsKey('Comment')) {
                $commentparts = $fresh['Comment'] -split ', '
                foreach ($part in $commentparts) {
                    $indkey, $indvalue = $part -split ': ', 2
                    if ($fresh.ContainsKey($indkey)) {
                        $fresh[$indkey] = $indvalue
                    }
                }
            }
            if ($null -ne $fresh['Error']) {
                $fresh['Error'] = $fresh['Error'] -join "`n"
            }

            return $fresh
        }
    }
    process {
        foreach ($instance in $sqlinstance) {
            $logdir = $logfiles = $null
            $computername = $instance.ComputerName

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Can't connect to $instance" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }
            if ($logtype -ne 'IndexOptimize') {
                Write-Message -Level Warning -Message "Parsing $logtype is not supported at the moment"
                Continue
            }
            if ($Path) {
                $logdir = Join-AdminUnc -Servername $server.ComputerName -Filepath $Path
            } else {
                $logdir = Join-AdminUnc -Servername $server.ComputerName -Filepath $server.errorlogpath # -replace '^(.):', "\\$computername\`$1$"
            }
            if (!$logdir) {
                Write-Message -Level Warning -Message "No log directory returned from $instance"
                Continue
            }

            Write-Message -Level Verbose -Message "Log directory on $computername is $logdir"
            if (! (Test-Path $logdir)) {
                Write-Message -Level Warning -Message "Directory $logdir is not accessible"
                continue
            }
            $logfiles = [System.IO.Directory]::EnumerateFiles("$logdir", "IndexOptimize_*.txt")
            if ($Since) {
                $filteredlogs = @()
                foreach ($l in $logfiles) {
                    $base = $($l.Substring($l.Length - 15, 15))
                    try {
                        $datefile = [DateTime]::ParseExact($base, 'yyyyMMdd_HHmmss', $null)
                    } catch {
                        $datefile = Get-ItemProperty -Path $l | Select-Object -ExpandProperty CreationTime
                    }
                    if ($datefile -gt $since) {
                        $filteredlogs += $l
                    }
                }
                $logfiles = $filteredlogs
            }
            if (! $logfiles.count -ge 1) {
                Write-Message -Level Warning -Message "No log files returned from $computername"
                Continue
            }
            $instanceinfo = @{ }
            $instanceinfo['ComputerName'] = $server.ComputerName
            $instanceinfo['InstanceName'] = $server.ServiceName
            $instanceinfo['SqlInstance'] = $server.Name

            foreach ($File in $logfiles) {
                Write-Message -Level Verbose -Message "Reading $file"
                $text = New-Object System.IO.StreamReader -ArgumentList "$File"
                $block = New-Object System.Collections.ArrayList
                $remember = @{}
                while ($line = $text.ReadLine()) {

                    $real = $line.Trim()
                    if ($real.Length -eq 0) {
                        $processed = process-block $block
                        if ('Procedure' -in $processed.Keys) {
                            $block = New-Object System.Collections.ArrayList
                            continue
                        }
                        if ('Database' -in $processed.Keys) {
                            Write-Message -Level Verbose -Message "Index and Stats Optimizations on Database $($processed.Database) on $computername"
                            $processed.Remove('Is accessible')
                            $processed.Remove('User access')
                            $processed.Remove('Date and time')
                            $processed.Remove('Standby')
                            $processed.Remove('Recovery Model')
                            $processed.Remove('Updateability')
                            $processed['Database'] = $processed['Database'].Trim('[]')
                            $remember = $processed.Clone()
                        } else {
                            foreach ($k in $processed.Keys) {
                                $remember[$k] = $processed[$k]
                            }
                            $remember.Remove('Command')
                            $remember['StartTime'] = [dbadatetime]([DateTime]::ParseExact($remember['Date and time'] , "yyyy-MM-dd HH:mm:ss", $null))
                            $remember.Remove('Date and time')
                            $remember['Duration'] = ($remember['Duration'] -as [timespan])
                            [pscustomobject]$remember
                        }
                        $block = New-Object System.Collections.ArrayList
                    } else {
                        $null = $block.Add($real)
                    }
                }
                $text.close()
            }
        }
    }
}

tools\dbatools\functions\Get-DbaManagementObject.ps1

function Get-DbaManagementObject {
    <#
    .SYNOPSIS
        Gets SQL Mangaement Object versions installed on the machine.

    .DESCRIPTION
        The Get-DbaManagementObject returns an object with the Version and the
        Add-Type Load Template for each version on the server.

    .PARAMETER ComputerName
        The name of the Windows Server(s) you would like to check.

    .PARAMETER Credential
        This command uses Windows credentials. This parameter allows you to connect remotely as a different user.

    .PARAMETER VersionNumber
        This is the specific version number you are looking for. The function will look
        for that version only.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: SMO
        Author: Ben Miller (@DBAduck), http://dbaduck.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaManagementObject

    .EXAMPLE
        PS C:\> Get-DbaManagementObject

        Returns all versions of SMO on the computer

    .EXAMPLE
        PS C:\> Get-DbaManagementObject -VersionNumber 13

        Returns just the version specified. If the version does not exist then it will return nothing.

    #>
    [CmdletBinding()]
    param (
        [parameter(ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "SqlInstance")]
        [DbaInstanceParameter[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]
        $Credential,
        [int]$VersionNumber,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        if (!$VersionNumber) {
            $VersionNumber = 0
        }
        $scriptblock = {
            $VersionNumber = [int]$args[0]
            <# DO NOT use Write-Message as this is inside of a script block #>
            Write-Verbose -Message "Checking currently loaded SMO version"
            $loadedversion = [AppDomain]::CurrentDomain.GetAssemblies() | Where-Object { $_.Fullname -like "Microsoft.SqlServer.SMO,*" }
            if ($loadedversion) {
                $loadedversion = $loadedversion | ForEach-Object {
                    if ($_.Location -match "__") {
                        ((Split-Path (Split-Path $_.Location) -Leaf) -split "__")[0]
                    } else {
                        ((Get-ChildItem -Path $_.Location).VersionInfo.ProductVersion)
                    }
                }
            }
            <# DO NOT use Write-Message as this is inside of a script block #>
            Write-Verbose -Message "Looking for included smo library"
            $localversion = [version](Get-ChildItem -Path "$script:PSModuleRoot\bin\smo\Microsoft.SqlServer.Smo.dll").VersionInfo.ProductVersion

            foreach ($version in $localversion) {
                if ($VersionNumber -eq 0) {
                    <# DO NOT use Write-Message as this is inside of a script block #>
                    Write-Verbose -Message "Did not pass a version"
                    [PSCustomObject]@{
                        ComputerName = $env:COMPUTERNAME
                        Version      = $localversion
                        Loaded       = $loadedversion -contains $localversion
                        LoadTemplate = "Add-Type -Path $("$script:PSModuleRoot\bin\smo\Microsoft.SqlServer.Smo.dll")"
                    }
                } else {
                    <# DO NOT use Write-Message as this is inside of a script block #>
                    Write-Verbose -Message "Passed version $VersionNumber, looking for that specific version"
                    if ($localversion.ToString().StartsWith("$VersionNumber.")) {
                        <# DO NOT use Write-Message as this is inside of a script block #>
                        Write-Verbose -Message "Found the Version $VersionNumber"
                        [PSCustomObject]@{
                            ComputerName = $env:COMPUTERNAME
                            Version      = $localversion
                            Loaded       = $loadedversion -contains $localversion
                            LoadTemplate = "Add-Type -Path $("$script:PSModuleRoot\bin\smo\Microsoft.SqlServer.Smo.dll")"
                        }
                    }
                }
            }
            <# DO NOT use Write-Message as this is inside of a script block #>
            Write-Verbose -Message "Looking for SMO in the Global Assembly Cache"
            $smolist = (Get-ChildItem -Path "$env:SystemRoot\assembly\GAC_MSIL\Microsoft.SqlServer.Smo" | Sort-Object Name -Descending).Name

            foreach ($version in $smolist) {
                $array = $version.Split("__")
                if ($VersionNumber -eq 0) {
                    <# DO NOT use Write-Message as this is inside of a script block #>
                    Write-Verbose -Message "Did not pass a version, looking for all versions"
                    $currentversion = $array[0]
                    [PSCustomObject]@{
                        ComputerName = $env:COMPUTERNAME
                        Version      = $currentversion
                        Loaded       = $loadedversion -contains $currentversion
                        LoadTemplate = "Add-Type -AssemblyName `"Microsoft.SqlServer.Smo, Version=$($array[0]), Culture=neutral, PublicKeyToken=89845dcd8080cc91`""
                    }
                } else {
                    <# DO NOT use Write-Message as this is inside of a script block #>
                    Write-Verbose -Message "Passed version $VersionNumber, looking for that specific version"
                    if ($array[0].StartsWith("$VersionNumber.")) {
                        <# DO NOT use Write-Message as this is inside of a script block #>
                        Write-Verbose -Message "Found the Version $VersionNumber"
                        $currentversion = $array[0]
                        [PSCustomObject]@{
                            ComputerName = $env:COMPUTERNAME
                            Version      = $currentversion
                            Loaded       = $loadedversion -contains $currentversion
                            LoadTemplate = "Add-Type -AssemblyName `"Microsoft.SqlServer.Smo, Version=$($array[0]), Culture=neutral, PublicKeyToken=89845dcd8080cc91`""
                        }
                    }
                }
            }
        }
    }

    process {
        foreach ($computer in $ComputerName.ComputerName) {
            try {
                Write-Message -Level Verbose -Message "Executing scriptblock against $computer"
                Invoke-Command2 -ComputerName $computer -ScriptBlock $scriptblock -Credential $Credential -ArgumentList $VersionNumber -ErrorAction Stop
            } catch {
                Stop-Function -Continue -Message "Failure" -ErrorRecord $_ -Target $ComputerName
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Get-DbaSqlManagementObject
    }
}

tools\dbatools\functions\Get-DbaMaxMemory.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaMaxMemory {
    <#
    .SYNOPSIS
        Gets the 'Max Server Memory' configuration setting and the memory of the server.  Works on SQL Server 2000-2014.

    .DESCRIPTION
        This command retrieves the SQL Server 'Max Server Memory' configuration setting as well as the total physical installed on the server.

        Results are turned in megabytes (MB).

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: MaxMemory, Memory
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaMaxMemory

    .EXAMPLE
        PS C:\> Get-DbaMaxMemory -SqlInstance sqlcluster, sqlserver2012

        Get memory settings for instances "sqlcluster" and "sqlserver2012". Returns results in megabytes (MB).

    .EXAMPLE
        PS C:\> Get-DbaCmsRegServer -SqlInstance sqlcluster | Get-DbaMaxMemory | Where-Object { $_.MaxValue -gt $_.Total }

        Find all servers in Server Central Management Server that have 'Max Server Memory' set to higher than the total memory of the server (think 2147483647)

    .EXAMPLE
        PS C:\> Find-DbaInstance -ComputerName localhost | Get-DbaMaxMemory | Format-Table -AutoSize

        Scans localhost for instances using the browser service, traverses all instances and displays memory settings in a formatted table.
       #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $totalMemory = $server.PhysicalMemory

            # Some servers under-report by 1.
            if (($totalMemory % 1024) -ne 0) {
                $totalMemory = $totalMemory + 1
            }

            [pscustomobject]@{
                ComputerName = $server.ComputerName
                InstanceName = $server.ServiceName
                SqlInstance  = $server.DomainInstanceName
                Total        = [int]$totalMemory
                MaxValue     = [int]$server.Configuration.MaxServerMemory.ConfigValue
                Server       = $server # This will allowing piping a non-connected object
            } | Select-DefaultView -Property ComputerName, InstanceName, SqlInstance, Total, MaxValue
        }
    }
}

tools\dbatools\functions\Get-DbaMemoryCondition.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaMemoryCondition {
    <#
    .SYNOPSIS
        Determine the memory conditions from SQL Server ring buffers.

    .DESCRIPTION
        The information from SQL Server ring buffers can be used to determine the memory conditions on the server when paging occurs.

        This command is based on a query provided by Microsoft support.
        Reference KB article: https://support.microsoft.com/en-us/help/918483/how-to-reduce-paging-of-buffer-pool-memory-in-the-64-bit-version-of-sq

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential).

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Memory
        Author: IJeb Reitsma
        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaMemoryCondition

    .EXAMPLE
        PS C:\> Get-DbaMemoryCondition -SqlInstance sqlserver2014a

        Returns the memory conditions for the selected instance

    .EXAMPLE
        PS C:\> Get-DbaCmsRegServer -SqlInstance sqlserver2014a -Group GroupName | Get-DbaMemoryCondition | Out-GridView

        Returns the memory conditions for a group of servers from SQL Server Central Management Server (CMS). Send output to GridView.
       #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "SqlServers")]
        [DbaInstance[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [switch]$EnableException
    )

    begin {
        $sql = "SELECT CONVERT (varchar(30), GETDATE(), 121) as Runtime,
    DATEADD (ms, -1 * (sys.ms_ticks - a.[RecordTime]), GETDATE()) AS NotificationTime,
    [NotificationType],
    [MemoryUtilizationPercent],
    [TotalPhysicalMemoryKB],
    [AvailablePhysicalMemoryKB],
    [TotalPageFileKB],
    [AvailablePageFileKB],
    [TotalVirtualAddressSpaceKB],
    [AvailableVirtualAddressSpaceKB],
    [NodeId],
    [SQLReservedMemoryKB],
    [SQLCommittedMemoryKB],
    [RecordId],
    [Type],
    [Indicators],
    [RecordTime],
    sys.ms_ticks AS [CurrentTime]
    FROM
    (SELECT x.value('(//Record/ResourceMonitor/Notification)[1]', 'varchar(30)') AS [NotificationType],
    x.value('(//Record/MemoryRecord/MemoryUtilization)[1]', 'bigint') AS [MemoryUtilizationPercent],
    x.value('(//Record/MemoryRecord/TotalPhysicalMemory)[1]', 'bigint') AS [TotalPhysicalMemoryKB],
    x.value('(//Record/MemoryRecord/AvailablePhysicalMemory)[1]', 'bigint') AS [AvailablePhysicalMemoryKB],
    x.value('(//Record/MemoryRecord/TotalPageFile)[1]', 'bigint') AS [TotalPageFileKB],
    x.value('(//Record/MemoryRecord/AvailablePageFile)[1]', 'bigint') AS [AvailablePageFileKB],
    x.value('(//Record/MemoryRecord/TotalVirtualAddressSpace)[1]', 'bigint') AS [TotalVirtualAddressSpaceKB],
    x.value('(//Record/MemoryRecord/AvailableVirtualAddressSpace)[1]', 'bigint') AS [AvailableVirtualAddressSpaceKB],
    x.value('(//Record/MemoryNode/@id)[1]', 'bigint') AS [NodeId],
    x.value('(//Record/MemoryNode/ReservedMemory)[1]', 'bigint') AS [SQLReservedMemoryKB],
    x.value('(//Record/MemoryNode/CommittedMemory)[1]', 'bigint') AS [SQLCommittedMemoryKB],
    x.value('(//Record/@id)[1]', 'bigint') AS [RecordId],
    x.value('(//Record/@type)[1]', 'varchar(30)') AS [Type],
    x.value('(//Record/ResourceMonitor/Indicators)[1]', 'bigint') AS [Indicators],
    x.value('(//Record/@time)[1]', 'bigint') AS [RecordTime]
    FROM (SELECT CAST (record as xml) FROM sys.dm_os_ring_buffers
    WHERE ring_buffer_type = 'RING_BUFFER_RESOURCE_MONITOR') AS R(x)) a
CROSS JOIN sys.dm_os_sys_info sys
ORDER BY a.[RecordTime] ASC"
    }
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            try {
                $results = $server.Query($sql)
            } catch {
                Stop-Function -Message "Issue collecting data" -Target $instance -ErrorRecord $_
            }
            foreach ($row in $results) {
                [PSCustomObject]@{
                    ComputerName                 = $server.ComputerName
                    InstanceName                 = $server.ServiceName
                    SqlInstance                  = $server.DomainInstanceName
                    Runtime                      = $row.runtime
                    NotificationTime             = $row.NotificationTime
                    NotificationType             = $row.NotificationType
                    MemoryUtilizationPercent     = $row.MemoryUtilizationPercent
                    TotalPhysicalMemory          = [dbasize]$row.TotalPhysicalMemoryKB * 1024
                    AvailablePhysicalMemory      = [dbasize]$row.AvailablePhysicalMemoryKB * 1024
                    TotalPageFile                = [dbasize]$row.TotalPageFileKB * 1024
                    AvailablePageFile            = [dbasize]$row.AvailablePageFileKB * 1024
                    TotalVirtualAddressSpace     = [dbasize]$row.TotalVirtualAddressSpaceKB * 1024
                    AvailableVirtualAddressSpace = [dbasize]$row.AvailableVirtualAddressSpaceKB * 1024
                    NodeId                       = $row.NodeId
                    SQLReservedMemory            = [dbasize]$row.SQLReservedMemoryKB * 1024
                    SQLCommittedMemory           = [dbasize]$row.SQLCommittedMemoryKB * 1024
                    RecordId                     = $row.RecordId
                    Type                         = $row.Type
                    Indicators                   = $row.Indicators
                    RecordTime                   = $row.RecordTime
                    CurrentTime                  = $row.CurrentTime
                }
            }
        }
    }
}

tools\dbatools\functions\Get-DbaMemoryUsage.ps1

#ValidationTags#Messaging,CodeStyle#
function Get-DbaMemoryUsage {
    <#
    .SYNOPSIS
        Get amount of memory in use by *all* SQL Server components and instances

    .DESCRIPTION
        Retrieves the amount of memory per performance counter. Default output includes columns Server, counter instance, counter, number of pages, memory in KB, memory in MB
        SSAS and SSIS are included.

        SSRS does not have memory counters, only memory shrinks and memory pressure state.

        This function requires local admin role on the targeted computers.

    .PARAMETER ComputerName
        The Windows Server that you are connecting to. Note that this will return all instances, but Out-GridView makes it easy to filter to specific instances.

    .PARAMETER Credential
        Credential object used to connect to the SQL Server as a different user

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Memory
        Author: Klaas Vandenberghe (@PowerDBAKlaas)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        SSIS Counters: https://msdn.microsoft.com/en-us/library/ms137622.aspx

    .LINK
        https://dbatools.io/Get-DbaMemoryUsage

    .EXAMPLE
        PS C:\> Get-DbaMemoryUsage -ComputerName sql2017

        Returns a custom object displaying Server, counter instance, counter, number of pages, memory

    .EXAMPLE
        PS C:\> Get-DbaMemoryUsage -ComputerName sql2017\sqlexpress -SqlCredential sqladmin | Where-Object { $_.Memory.Megabyte -gt 100 }

        Logs into the sql2017\sqlexpress as sqladmin using SQL Authentication then returns results only where memory exceeds 100 MB

    .EXAMPLE
        PS C:\> $servers | Get-DbaMemoryUsage | Out-Gridview

       Gets results from an array of $servers then diplays them in a gridview.
    #>
    [CmdletBinding()]
    param (
        [parameter(ValueFromPipeline)]
        [Alias("Host", "cn", "Server")]
        [DbaInstanceParameter[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [switch]$EnableException
    )

    begin {
        if ($Simple) {
            $Memcounters = '(Total Server Memory |Target Server Memory |Connection Memory |Lock Memory |SQL Cache Memory |Optimizer Memory |Granted Workspace Memory |Cursor memory usage|Maximum Workspace)'
            $Plancounters = 'total\)\\cache pages'
            $BufManpagecounters = 'Total pages'
            $SSAScounters = '(\\memory usage)'
            $SSIScounters = '(memory)'
        } else {
            $Memcounters = '(Total Server Memory |Target Server Memory |Connection Memory |Lock Memory |SQL Cache Memory |Optimizer Memory |Granted Workspace Memory |Cursor memory usage|Maximum Workspace)'
            $Plancounters = '(cache pages|procedure plan|ad hoc sql plan|prepared SQL Plan)'
            $BufManpagecounters = '(Free pages|Reserved pages|Stolen pages|Total pages|Database pages|target pages|extension .* pages)'
            $SSAScounters = '(\\memory )'
            $SSIScounters = '(memory)'
        }

        $scriptblock = {
            param ($Memcounters,
                $Plancounters,
                $BufManpagecounters,
                $SSAScounters,
                $SSIScounters)
            <# DO NOT use Write-Message as this is inside of a script block #>
            Write-Verbose -Message "Searching for Memory Manager Counters on $Computer"
            try {
                $availablecounters = (Get-Counter -ListSet '*sql*:Memory Manager*' -ErrorAction SilentlyContinue).paths
                (Get-Counter -Counter $availablecounters -ErrorAction SilentlyContinue).countersamples |
                    Where-Object { $_.Path -match $Memcounters } |
                    ForEach-Object {
                    $instance = (($_.Path.split("\")[-2]).replace("mssql`$", "")).split(':')[0]
                    if ($instance -eq 'sqlserver') { $instance = 'mssqlserver' }
                    [PSCustomObject]@{
                        ComputerName    = $env:computername
                        SqlInstance     = $instance
                        CounterInstance = (($_.Path.split("\")[-2]).replace("mssql`$", "")).split(':')[1]
                        Counter         = $_.Path.split("\")[-1]
                        Pages           = $null
                        Memory          = $_.cookedvalue / 1024
                    }
                }
            } catch {
                <# DO NOT use Write-Message as this is inside of a script block #>
                Write-Verbose -Message "No Memory Manager Counters on $Computer"
            }
            <# DO NOT use Write-Message as this is inside of a script block #>
            Write-Verbose -Message "Searching for Plan Cache Counters on $Computer"
            try {
                $availablecounters = (Get-Counter -ListSet '*sql*:Plan Cache*' -ErrorAction SilentlyContinue).paths
                (Get-Counter -Counter $availablecounters -ErrorAction SilentlyContinue).countersamples |
                    Where-Object { $_.Path -match $Plancounters } |
                    ForEach-Object {
                    $instance = (($_.Path.split("\")[-2]).replace("mssql`$", "")).split(':')[0]
                    if ($instance -eq 'sqlserver') { $instance = 'mssqlserver' }
                    [PSCustomObject]@{
                        ComputerName    = $env:computername
                        SqlInstance     = $instance
                        CounterInstance = (($_.Path.split("\")[-2]).replace("mssql`$", "")).split(':')[1]
                        Counter         = $_.Path.split("\")[-1]
                        Pages           = $_.cookedvalue
                        Memory          = $_.cookedvalue * 8192 / 1048576
                    }
                }
            } catch {
                <# DO NOT use Write-Message as this is inside of a script block #>
                Write-Verbose -Message "No Plan Cache Counters on $Computer"
            }
            <# DO NOT use Write-Message as this is inside of a script block #>
            Write-Verbose -Message "Searching for Buffer Manager Counters on $Computer"
            try {
                $availablecounters = (Get-Counter -ListSet "*Buffer Manager*" -ErrorAction SilentlyContinue).paths
                (Get-Counter -Counter $availablecounters -ErrorAction SilentlyContinue).countersamples |
                    Where-Object { $_.Path -match $BufManpagecounters } |
                    ForEach-Object {
                    $instance = (($_.Path.split("\")[-2]).replace("mssql`$", "")).split(':')[0]
                    if ($instance -eq 'sqlserver') { $instance = 'mssqlserver' }
                    [PSCustomObject]@{
                        ComputerName    = $env:computername
                        SqlInstance     = $instance
                        CounterInstance = (($_.Path.split("\")[-2]).replace("mssql`$", "")).split(':')[1]
                        Counter         = $_.Path.split("\")[-1]
                        Pages           = $_.cookedvalue
                        Memory          = $_.cookedvalue * 8192 / 1048576.0
                    }
                }
            } catch {
                <# DO NOT use Write-Message as this is inside of a script block #>
                Write-Verbose -Message "No Buffer Manager Counters on $Computer"
            }
            <# DO NOT use Write-Message as this is inside of a script block #>
            Write-Verbose -Message "Searching for SSAS Counters on $Computer"
            try {
                $availablecounters = (Get-Counter -ListSet "MSAS*:Memory" -ErrorAction SilentlyContinue).paths
                (Get-Counter -Counter $availablecounters -ErrorAction SilentlyContinue).countersamples |
                    Where-Object { $_.Path -match $SSAScounters } |
                    ForEach-Object {
                    $instance = (($_.Path.split("\")[-2]).replace("mssql`$", "")).split(':')[0]
                    if ($instance -eq 'sqlserver') { $instance = 'mssqlserver' }
                    [PSCustomObject]@{
                        ComputerName    = $env:COMPUTERNAME
                        SqlInstance     = $instance
                        CounterInstance = (($_.Path.split("\")[-2]).replace("mssql`$", "")).split(':')[1]
                        Counter         = $_.Path.split("\")[-1]
                        Pages           = $null
                        Memory          = $_.cookedvalue / 1024
                    }
                }
            } catch {
                <# DO NOT use Write-Message as this is inside of a script block #>
                Write-Verbose -Message "No SSAS Counters on $Computer"
            }
            <# DO NOT use Write-Message as this is inside of a script block #>
            Write-Verbose -Message "Searching for SSIS Counters on $Computer"
            try {
                $availablecounters = (Get-Counter -ListSet "*SSIS*" -ErrorAction SilentlyContinue).paths
                (Get-Counter -Counter $availablecounters -ErrorAction SilentlyContinue).countersamples |
                    Where-Object { $_.Path -match $SSIScounters } |
                    ForEach-Object {
                    $instance = (($_.Path.split("\")[-2]).replace("mssql`$", "")).split(':')[0]
                    if ($instance -eq 'sqlserver') { $instance = 'mssqlserver' }
                    [PSCustomObject]@{
                        ComputerName    = $env:computername
                        SqlInstance     = $instance
                        CounterInstance = (($_.Path.split("\")[-2]).replace("mssql`$", "")).split(':')[1]
                        Counter         = $_.Path.split("\")[-1]
                        Pages           = $null
                        Memory          = $_.cookedvalue / 1024 / 1024
                    }
                }
            } catch {
                <# DO NOT use Write-Message as this is inside of a script block #>
                Write-Verbose -Message "No SSIS Counters on $Computer"
            }
        }
    }

    process {
        foreach ($Computer in $ComputerName.ComputerName) {
            $reply = Resolve-DbaNetworkName -ComputerName $computer -Credential $Credential -ErrorAction SilentlyContinue
            if ($reply.FullComputerName) {
                $Computer = $reply.FullComputerName
                try {
                    foreach ($result in (Invoke-Command2 -ComputerName $Computer -Credential $Credential -ScriptBlock $scriptblock -argumentlist $Memcounters, $Plancounters, $BufManpagecounters, $SSAScounters, $SSIScounters)) {
                        [PSCustomObject]@{
                            ComputerName    = $result.ComputerName
                            SqlInstance     = $result.SqlInstance
                            CounterInstance = $result.CounterInstance
                            Counter         = $result.Counter
                            Pages           = $result.Pages
                            Memory          = [dbasize]($result.Memory * 1024 * 1024)
                        }
                    }
                } catch {
                    Stop-Function -Message "Failure" -ErrorRecord $_ -Target $computer -Continue
                }
            } else {
                Write-Message -Level Warning -Message "Can't resolve $Computer."
                Continue
            }
        }
    }
}

tools\dbatools\functions\Get-DbaModule.ps1

function Get-DbaModule {
    <#
    .SYNOPSIS
        Displays all objects in sys.sys_modules after specified modification date.  Works on SQL Server 2008 and above.

    .DESCRIPTION
        Quickly find modules (Stored Procs, Functions, Views, Constraints, Rules, Triggers, etc) that have been modified in a database, or across all databases.
        Results will exclude the module definition, but can be queried explicitly.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The database(s) to process. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        The database(s) to exclude.

    .PARAMETER ModifiedSince
        DateTime value to use as minimum modified date of module.

    .PARAMETER Type
        Limit by specific type of module. Valid choices include: View, TableValuedFunction, DefaultConstraint, StoredProcedure, Rule, InlineTableValuedFunction, Trigger, ScalarFunction

    .PARAMETER ExcludeSystemDatabases
        Allows you to suppress output on system databases

    .PARAMETER ExcludeSystemObjects
        Allows you to suppress output on system objects

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: StoredProcedure, Trigger
        Author: Brandon Abshire, netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaModule

    .EXAMPLE
        PS C:\> Get-DbaModule -SqlInstance sql2008, sqlserver2012

        Return all modules for servers sql2008 and sqlserver2012 sorted by Database, Modify_Date ASC.

    .EXAMPLE
        PS C:\> Get-DbaModule -SqlInstance sql2008, sqlserver2012 | Select *

        Shows hidden definition column (informative wall of text).

    .EXAMPLE
        PS C:\> Get-DbaModule -SqlInstance sql2008 -Database TestDB -ModifiedSince "2017-01-01 10:00:00"

        Return all modules on server sql2008 for only the TestDB database with a modified date after 1 January 2017 10:00:00 AM.

    .EXAMPLE
        PS C:\> Get-DbaModule -SqlInstance sql2008 -Type View, Trigger, ScalarFunction

        Return all modules on server sql2008 for all databases that are triggers, views or scalar functions.

    #>
    [CmdletBinding()]
    param (
        [Parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [datetime]$ModifiedSince = "1900-01-01",
        [ValidateSet("View", "TableValuedFunction", "DefaultConstraint", "StoredProcedure", "Rule", "InlineTableValuedFunction", "Trigger", "ScalarFunction")]
        [string[]]$Type,
        [switch]$ExcludeSystemDatabases,
        [switch]$ExcludeSystemObjects,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {

        $types = @()

        foreach ($t in $type) {
            if ($t -eq "View") { $types += "VIEW" }
            if ($t -eq "TableValuedFunction") { $types += "SQL_TABLE_VALUED_FUNCTION" }
            if ($t -eq "DefaultConstraint") { $types += "DEFAULT_CONSTRAINT" }
            if ($t -eq "StoredProcedure") { $types += "SQL_STORED_PROCEDURE" }
            if ($t -eq "Rule") { $types += "RULE" }
            if ($t -eq "InlineTableValuedFunction") { $types += "SQL_INLINE_TABLE_VALUED_FUNCTION" }
            if ($t -eq "Trigger") { $types += "SQL_TRIGGER" }
            if ($t -eq "ScalarFunction") { $types += "SQL_SCALAR_FUNCTION" }
        }


        $sql = "SELECT  DB_NAME() AS DatabaseName,
        so.name AS ModuleName,
        so.object_id ,
        SCHEMA_NAME(so.schema_id) AS SchemaName ,
        so.parent_object_id ,
        so.type ,
        so.type_desc ,
        so.create_date ,
        so.modify_date ,
        so.is_ms_shipped ,
        sm.definition,
         OBJECTPROPERTY(so.object_id, 'ExecIsStartUp') as startup
        FROM sys.sql_modules sm
        LEFT JOIN sys.objects so ON sm.object_id = so.object_id
        WHERE so.modify_date >= '$($ModifiedSince)'"
        if ($ExcludeSystemObjects) {
            $sql += "`n AND so.is_ms_shipped = 0"
        }
        if ($Type) {
            $sqltypes = $types -join "','"
            $sql += " AND type_desc in ('$sqltypes')"
        }
        $sql += "`n ORDER BY so.modify_date"
    }

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential -MinimumVersion 10
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $databases = Get-DbaDatabase -SqlInstance $server

            if ($Database) {
                $databases = $databases | Where-Object Name -In $Database
            }
            if ($ExcludeDatabase) {
                $databases = $databases | Where-Object Name -NotIn $ExcludeDatabase
            }


            foreach ($db in $databases) {

                Write-Message -Level Verbose -Message "Processing $db on $instance"

                if ($db.IsAccessible -eq $false) {
                    Stop-Function -Message "The database $db is not accessible. Skipping database." -Target $db -Continue
                }

                foreach ($row in $server.Query($sql, $db.name)) {
                    [PSCustomObject]@{
                        ComputerName  = $server.ComputerName
                        InstanceName  = $server.ServiceName
                        SqlInstance   = $server.DomainInstanceName
                        Database      = $row.DatabaseName
                        Name          = $row.ModuleName
                        ObjectID      = $row.object_id
                        SchemaName    = $row.SchemaName
                        Type          = $row.type_desc
                        CreateDate    = $row.create_date
                        ModifyDate    = $row.modify_date
                        IsMsShipped   = $row.is_ms_shipped
                        ExecIsStartUp = $row.startup
                        Definition    = $row.definition
                    } | Select-DefaultView -ExcludeProperty Definition
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Get-DbaSqlModule
    }
}

tools\dbatools\functions\Get-DbaMsdtc.ps1

#ValidationTags#Messaging#
function Get-DbaMsdtc {
    <#
    .SYNOPSIS
        Displays information about the Distributed Transaction Coordinator (MSDTC) on a server

    .DESCRIPTION
        Returns a custom object with Computer name, state of the MSDTC Service, security settings of MSDTC and CID's

        Requires: Windows administrator access on Servers

    .PARAMETER ComputerName
        The target computer.

    .NOTES
        Tags: Msdtc, dtc
        Author: Klaas Vandenberghe (@powerdbaklaas)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaMsdtc

    .EXAMPLE
        PS C:\> Get-DbaMsdtc -ComputerName srv0042

        Get DTC status for the server srv0042

    .EXAMPLE
        PS C:\> $Computers = (Get-Content D:\configfiles\SQL\MySQLInstances.txt | % {$_.split('\')[0]})
        PS C:\> $Computers | Get-DbaMsdtc

        Get DTC status for all the computers in a .txt file

    .EXAMPLE
        PS C:\> Get-DbaMsdtc -Computername $Computers | where { $_.dtcservicestate -ne 'running' }

        Get DTC status for all the computers where the MSDTC Service is not running

    .EXAMPLE
        PS C:\> Get-DbaMsdtc -ComputerName srv0042 | Out-Gridview

        Get DTC status for the computer srv0042 and show in a grid view

    #>
    [CmdletBinding()]
    param (
        [Parameter(ValueFromPipeline)]
        [Alias('cn', 'host', 'Server')]
        [string[]]$ComputerName = $env:COMPUTERNAME
    )

    begin {
        $ComputerName = $ComputerName | ForEach-Object {$_.split("\")[0]} | Select-Object -Unique
        $query = "Select * FROM Win32_Service WHERE Name = 'MSDTC'"
        $dtcSecurity = {
            Get-ItemProperty -Path HKLM:\Software\Microsoft\MSDTC\Security |
                Select-Object PSPath, PSComputerName, AccountName, networkDTCAccess,
            networkDTCAccessAdmin, networkDTCAccessClients, networkDTCAccessInbound,
            networkDTCAccessOutBound, networkDTCAccessTip, networkDTCAccessTransactions, XATransactions
        }
        $dtcCids = {
            New-PSDrive -Name HKCR -PSProvider Registry -Root HKEY_CLASSES_ROOT | Out-Null
            Get-ItemProperty -Path HKCR:\CID\*\Description |
                Select-Object @{ l = 'Data'; e = { $_.'(default)' } }, @{ l = 'CID'; e = { $_.PSParentPath.split('\')[-1] } }
            Remove-PSDrive -Name HKCR | Out-Null
        }
    }
    process {
        foreach ($computer in $ComputerName) {
            $reg = $cids = $null
            $cidHash = @{}
            if ( Test-PSRemoting -ComputerName $computer ) {
                $dtcservice = $null
                Write-Message -Level Verbose -Message "Getting DTC on $computer via WSMan"
                $dtcservice = Get-Ciminstance -ComputerName $computer -Query $query
                if ( $null -eq $dtcservice ) {
                    Write-Message -Level Warning -Message "Can't connect to CIM on $computer via WSMan"
                }

                Write-Message -Level Verbose -Message "Getting MSDTC Security Registry Values on $computer"
                $reg = Invoke-Command -ComputerName $computer -ScriptBlock $dtcSecurity
                if ( $null -eq $reg ) {
                    Write-Message -Level Warning -Message "Can't connect to MSDTC Security registry on $computer"
                }
                Write-Message -Level Verbose -Message "Getting MSDTC CID Registry Values on $computer"
                $cids = Invoke-Command -ComputerName $computer -ScriptBlock $dtcCids
                if ( $null -ne $cids ) {
                    foreach ($key in $cids) {
                        $cidHash.Add($key.Data, $key.CID)
                    }
                } else {
                    Write-Message -Level Warning -Message "Can't connect to MSDTC CID registry on $computer"
                }
            } else {
                Write-Message -Level Verbose -Message "PSRemoting is not enabled on $computer"
                try {
                    Write-Message -Level Verbose -Message "Failed To get DTC via WinRM. Getting DTC on $computer via DCom"
                    $SessionParams = @{ }
                    $SessionParams.ComputerName = $Computer
                    $SessionParams.SessionOption = (New-CimSessionOption -Protocol Dcom)
                    $Session = New-CimSession @SessionParams
                    $dtcservice = Get-Ciminstance -CimSession $Session -Query $query
                } catch {
                    Stop-Function -Message "Can't connect to CIM on $computer via DCom" -Target $computer -ErrorRecord $_ -Continue
                }
            }
            if ( $dtcservice ) {
                [PSCustomObject]@{
                    ComputerName                 = $dtcservice.PSComputerName
                    DTCServiceName               = $dtcservice.DisplayName
                    DTCServiceState              = $dtcservice.State
                    DTCServiceStatus             = $dtcservice.Status
                    DTCServiceStartMode          = $dtcservice.StartMode
                    DTCServiceAccount            = $dtcservice.StartName
                    DTCCID_MSDTC                 = $cidHash['MSDTC']
                    DTCCID_MSDTCUIS              = $cidHash['MSDTCUIS']
                    DTCCID_MSDTCTIPGW            = $cidHash['MSDTCTIPGW']
                    DTCCID_MSDTCXATM             = $cidHash['MSDTCXATM']
                    networkDTCAccess             = $reg.networkDTCAccess
                    networkDTCAccessAdmin        = $reg.networkDTCAccessAdmin
                    networkDTCAccessClients      = $reg.networkDTCAccessClients
                    networkDTCAccessInbound      = $reg.networkDTCAccessInbound
                    networkDTCAccessOutBound     = $reg.networkDTCAccessOutBound
                    networkDTCAccessTip          = $reg.networkDTCAccessTip
                    networkDTCAccessTransactions = $reg.networkDTCAccessTransactions
                    XATransactions               = $reg.XATransactions
                }
            }
        }
    }
}

tools\dbatools\functions\Get-DbaNetworkActivity.ps1

function Get-DbaNetworkActivity {
    <#
    .SYNOPSIS
        Gets the Current traffic on every Network Interface on a computer.

    .DESCRIPTION
        Gets the Current traffic on every Network Interface on a computer.
        See https://msdn.microsoft.com/en-us/library/aa394293(v=vs.85).aspx

        Requires Local Admin rights on destination computer(s).

    .PARAMETER ComputerName
        The target SQL Server instance or instances.

    .PARAMETER Credential
        Credential object used to connect to the computer as a different user.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Network
        Author: Klaas Vandenberghe (@PowerDBAKlaas)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaNetworkActivity

    .EXAMPLE
        PS C:\> Get-DbaNetworkActivity -ComputerName sqlserver2014a

        Gets the Current traffic on every Network Interface on computer sqlserver2014a.

    .EXAMPLE
        PS C:\> 'sql1','sql2','sql3' | Get-DbaNetworkActivity

        Gets the Current traffic on every Network Interface on computers sql1, sql2 and sql3.

    .EXAMPLE
        PS C:\> Get-DbaNetworkActivity -ComputerName sql1,sql2 | Out-Gridview

        Gets the Current traffic on every Network Interface on computers sql1 and sql2, and shows them in a grid view.

    #>
    [CmdletBinding()]
    param (
        [parameter(ValueFromPipeline)]
        [Alias("cn", "host", "Server")]
        [string[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential] $Credential,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        $ComputerName = $ComputerName | ForEach-Object {$_.split("\")[0]} | Select-Object -Unique
        $sessionoption = New-CimSessionOption -Protocol DCom
    }
    process {
        foreach ($computer in $ComputerName) {
            $Server = Resolve-DbaNetworkName -ComputerName $Computer -Credential $credential
            if ( $Server.FullComputerName ) {
                $Computer = $server.FullComputerName
                Write-Message -Level Verbose -Message "Creating CIMSession on $computer over WSMan"
                $CIMsession = New-CimSession -ComputerName $Computer -ErrorAction SilentlyContinue -Credential $Credential
                if ( -not $CIMSession ) {
                    Write-Message -Level Verbose -Message "Creating CIMSession on $computer over WSMan failed. Creating CIMSession on $computer over DCom"
                    $CIMsession = New-CimSession -ComputerName $Computer -SessionOption $sessionoption -ErrorAction SilentlyContinue -Credential $Credential
                }
                if ( $CIMSession ) {
                    Write-Message -Level Verbose -Message "Getting properties for Network Interfaces on $computer"
                    $NICs = Get-CimInstance -CimSession $CIMSession -ClassName Win32_PerfFormattedData_Tcpip_NetworkInterface
                    $NICs | Add-Member -Force -MemberType ScriptProperty -Name ComputerName -Value { $computer }
                    $NICs | Add-Member -Force -MemberType ScriptProperty -Name Bandwith -Value { switch ( $this.CurrentBandWidth ) { 10000000000 { '10Gb' } 1000000000 { '1Gb' } 100000000 { '100Mb' } 10000000 { '10Mb' } 1000000 { '1Mb' } 100000 { '100Kb' } default { 'Low' } } }
                    foreach ( $NIC in $NICs ) { Select-DefaultView -InputObject $NIC -Property 'ComputerName', 'Name as NIC', 'BytesReceivedPersec', 'BytesSentPersec', 'BytesTotalPersec', 'Bandwidth'}
                } #if CIMSession
                else {
                    Write-Message -Level Warning -Message "Can't create CIMSession on $computer"
                }
            } #if computername
            else {
                Write-Message -Level Warning -Message "can't connect to $computer"
            }
        } #foreach computer
    } #PROCESS
} #function

tools\dbatools\functions\Get-DbaNetworkCertificate.ps1

function Get-DbaNetworkCertificate {
    <#
    .SYNOPSIS
        Simplifies finding computer certificates that are candidates for using with SQL Server's network encryption

    .DESCRIPTION
        Gets computer certificates on localhost that are candidates for using with SQL Server's network encryption

    .PARAMETER ComputerName
       The target SQL Server instance or instances. Defaults to localhost. If target is a cluster, you must specify the distinct nodes.

    .PARAMETER Credential
        Allows you to login to $ComputerName using alternative credentials.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Certificate
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Get-DbaNetworkCertificate

        Gets computer certificates on localhost that are candidates for using with SQL Server's network encryption

    .EXAMPLE
        PS C:\> Get-DbaNetworkCertificate -ComputerName sql2016

        Gets computer certificates on sql2016 that are being used for SQL Server network encryption

    #>
    [CmdletBinding()]
    param (
        [parameter(ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "SqlInstance")]
        [DbaInstanceParameter[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [switch]$EnableException
    )
    
    process {
        # Registry access
        
        
        foreach ($computer in $computername) {

            try {
                $sqlwmis = Invoke-ManagedComputerCommand -ComputerName $computer.ComputerName -ScriptBlock { $wmi.Services } -Credential $Credential -ErrorAction Stop | Where-Object DisplayName -match "SQL Server \("
            } catch {
                Stop-Function -Message $_ -Target $sqlwmi -Continue
            }

            foreach ($sqlwmi in $sqlwmis) {

                $regroot = ($sqlwmi.AdvancedProperties | Where-Object Name -eq REGROOT).Value
                $vsname = ($sqlwmi.AdvancedProperties | Where-Object Name -eq VSNAME).Value
                $instancename = $sqlwmi.DisplayName.Replace('SQL Server (', '').Replace(')', '') # Don't clown, I don't know regex :(
                $serviceaccount = $sqlwmi.ServiceAccount

                if ([System.String]::IsNullOrEmpty($regroot)) {
                    $regroot = $sqlwmi.AdvancedProperties | Where-Object { $_ -match 'REGROOT' }
                    $vsname = $sqlwmi.AdvancedProperties | Where-Object { $_ -match 'VSNAME' }

                    if (![System.String]::IsNullOrEmpty($regroot)) {
                        $regroot = ($regroot -Split 'Value\=')[1]
                        $vsname = ($vsname -Split 'Value\=')[1]
                    } else {
                        Write-Message -Level Warning -Message "Can't find instance $vsname on $env:COMPUTERNAME"
                        return
                    }
                }

                if ([System.String]::IsNullOrEmpty($vsname)) { $vsname = $computer }

                Write-Message -Level Verbose -Message "Regroot: $regroot"
                Write-Message -Level Verbose -Message "ServiceAcct: $serviceaccount"
                Write-Message -Level Verbose -Message "InstanceName: $instancename"
                Write-Message -Level Verbose -Message "VSNAME: $vsname"

                $scriptblock = {
                    $regroot = $args[0]
                    $serviceaccount = $args[1]
                    $instancename = $args[2]
                    $vsname = $args[3]

                    $regpath = "Registry::HKEY_LOCAL_MACHINE\$regroot\MSSQLServer\SuperSocketNetLib"

                    $thumbprint = (Get-ItemProperty -Path $regpath -Name Certificate -ErrorAction SilentlyContinue).Certificate

                    try {
                        $cert = Get-ChildItem Cert:\LocalMachine -Recurse -ErrorAction Stop | Where-Object Thumbprint -eq $Thumbprint
                    } catch {
                        # Don't care - sometimes there's errors that are thrown for apparent good reason
                        # here to avoid an empty catch
                        $null = 1
                    }

                    if (!$cert) { continue }

                    [pscustomobject]@{
                        ComputerName   = $env:COMPUTERNAME
                        InstanceName   = $instancename
                        SqlInstance    = $vsname
                        ServiceAccount = $serviceaccount
                        FriendlyName   = $cert.FriendlyName
                        DnsNameList    = $cert.DnsNameList
                        Thumbprint     = $cert.Thumbprint
                        Generated      = $cert.NotBefore
                        Expires        = $cert.NotAfter
                        IssuedTo       = $cert.Subject
                        IssuedBy       = $cert.Issuer
                        Certificate    = $cert
                    }
                }

                try {
                    Invoke-Command2 -ComputerName $computer.ComputerName -Credential $Credential -ArgumentList $regroot, $serviceaccount, $instancename, $vsname -ScriptBlock $scriptblock -ErrorAction Stop |
                        Select-DefaultView -ExcludeProperty Certificate
                } catch {
                    Stop-Function -Message $_ -ErrorRecord $_ -Target $ComputerName -Continue
                }
            }
        }
    }
}

tools\dbatools\functions\Get-DbaDbAssembly.ps1

#ValidationTags#Messaging,FlowControl,CodeStyle#
function Get-DbaDbAssembly {
    <#
    .SYNOPSIS
        Gets SQL Database Assembly information for each instance(s) of SQL Server.

    .DESCRIPTION
        The Get-DbaDbAssembly command gets SQL Database Assembly information for each instance(s) of SQL Server.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function
        to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Assembly, Database
        Author: Garry Bargsley (@gbargsley), http://blog.garrybargsley.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaDbAssembly

    .EXAMPLE
        PS C:\> Get-DbaDbAssembly -SqlInstance localhost

        Returns all Database Assembly on the local default SQL Server instance

    .EXAMPLE
        PS C:\> Get-DbaDbAssembly -SqlInstance localhost, sql2016

        Returns all Database Assembly for the local and sql2016 SQL Server instances

    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            foreach ($database in ($server.Databases | Where-Object IsAccessible)) {
                try {
                    foreach ($assembly in $database.assemblies) {

                        Add-Member -Force -InputObject $assembly -MemberType NoteProperty -Name ComputerName -value $assembly.Parent.Parent.ComputerName
                        Add-Member -Force -InputObject $assembly -MemberType NoteProperty -Name InstanceName -value $assembly.Parent.Parent.ServiceName
                        Add-Member -Force -InputObject $assembly -MemberType NoteProperty -Name SqlInstance -value $assembly.Parent.Parent.DomainInstanceName

                        Select-DefaultView -InputObject $assembly -Property ComputerName, InstanceName, SqlInstance, ID, Name, Owner, 'AssemblySecurityLevel as SecurityLevel', CreateDate, IsSystemObject, Version
                    }
                } catch {
                    Stop-Function -Message "Issue pulling assembly information" -Target $assembly -ErrorRecord $_ -Continue
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Get-DbaDatabaseAssembly
    }
}

tools\dbatools\functions\Get-DbaDbccProcCache.ps1

function Get-DbaDbccProcCache {
    <#
    .SYNOPSIS
        Execution of Database Console Command DBCC PROCCACHE

    .DESCRIPTION
        Returns the results of DBCC PROCCACHE

        Read more:
            - https://docs.microsoft.com/en-us/sql/t-sql/database-console-commands/dbcc-proccache-transact-sql

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: DBCC
        Author: Patrick Flynn (@sqllensman)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaDbccProcCache

    .EXAMPLE
        PS C:\> Get-DbaDbccProcCache -SqlInstance Server1

        Get results of DBCC PROCCACHE for Instance Server1

    .EXAMPLE
        PS C:\> 'Sql1','Sql2/sqlexpress' | Get-DbaDbccProcCache

        Get results of DBCC PROCCACHE for Instances Sql1 and Sql2/sqlexpress

    .EXAMPLE
        PS C:\> $cred = Get-Credential sqladmin
        PS C:\> Get-DbaDbccProcCache -SqlInstance Server1 -SqlCredential $cred

        Connects using sqladmin credential and gets results of DBCC PROCCACHE for Instance Server1 using

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [switch]$EnableException
    )
    begin {

        $stringBuilder = New-Object System.Text.StringBuilder
        $null = $stringBuilder.Append("DBCC PROCCACHE WITH NO_INFOMSGS")
    }
    process {
        $query = $StringBuilder.ToString()
        foreach ($instance in $SqlInstance) {
            Write-Message -Message "Attempting Connection to $instance" -Level Verbose
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            try {
                if ($Pscmdlet.ShouldProcess($server.Name, "Execute the command $query")) {
                    Write-Message -Message "Query to run: $query" -Level Verbose
                    $results = $server.Query($query)
                }
            } catch {
                Stop-Function -Message "Failure" -ErrorRecord $_ -Target $server -Continue
            }
            If ($Pscmdlet.ShouldProcess("console", "Outputting object")) {
                foreach ($row in $results) {
                    [PSCustomObject]@{
                        ComputerName = $server.ComputerName
                        InstanceName = $server.ServiceName
                        SqlInstance  = $server.DomainInstanceName
                        Count        = $row[0]
                        Used         = $row[1]
                        Active       = $row[2]
                        CacheSize    = $row[3]
                        CacheUsed    = $row[4]
                        CacheActive  = $row[5]
                    }
                }
            }
        }
    }
}

tools\dbatools\functions\Get-DbaDbccUserOption.ps1

function Get-DbaDbccUserOption {
    <#
    .SYNOPSIS
        Execution of Database Console Command DBCC USEROPTIONS

    .DESCRIPTION
        Returns the results of DBCC USEROPTIONS

        Read more:
            - https://docs.microsoft.com/en-us/sql/t-sql/database-console-commands/dbcc-useroptions-transact-sql

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Option
        Return only specific options. Returns all results if not specified.
        Accepts any values in set 'ansi_null_dflt_on', 'ansi_nulls', 'ansi_padding', 'ansi_warnings', 'arithabort', 'concat_null_yields_null', 'datefirst', 'dateformat', 'isolation level', 'language', 'lock_timeout', 'quoted_identifier', 'textsize'

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: DBCC
        Author: Patrick Flynn (@sqllensman)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaDbccUserOptions

    .EXAMPLE
        PS C:\> Get-DbaDbccUserOptions -SqlInstance Server1

        Get results of DBCC USEROPTIONS for Instance Server1

    .EXAMPLE
        PS C:\> 'Sql1','Sql2/sqlexpress' | Get-DbaDbccUserOptions

        Get results of DBCC USEROPTIONS for Instances Sql1 and Sql2/sqlexpress

    .EXAMPLE
        PS C:\> $cred = Get-Credential sqladmin
        PS C:\> Get-DbaDbccUserOptions -SqlInstance Server1 -SqlCredential $cred

        Connects using sqladmin credential and gets results of DBCC USEROPTIONS for Instance Server1

    .EXAMPLE
        PS C:\> Get-DbaDbccUserOptions -SqlInstance Server1 -Option ansi_nulls, ansi_warnings, datefirst

        Gets results of DBCC USEROPTIONS for Instance Server1. Only display results for the options ansi_nulls, ansi_warnings, datefirst

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [ValidateSet('ansi_null_dflt_on', 'ansi_nulls', 'ansi_padding', 'ansi_warnings', 'arithabort', 'concat_null_yields_null', 'datefirst', 'dateformat', 'isolation level', 'language', 'lock_timeout', 'quoted_identifier', 'textsize')]
        [string[]]$Option,
        [switch]$EnableException
    )
    begin {
        $stringBuilder = New-Object System.Text.StringBuilder
        $null = $stringBuilder.Append("DBCC USEROPTIONS WITH NO_INFOMSGS")
    }
    process {
        $query = $StringBuilder.ToString()

        foreach ($instance in $SqlInstance) {
            Write-Message -Message "Attempting Connection to $instance" -Level Verbose
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Error connecting to $instance" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            try {
                Write-Message -Message "Query to run: $query" -Level Verbose
                $results = $server.Query($query)
            } catch {
                Stop-Function -Message "Failure running $query against $instance" -ErrorRecord $_ -Target $server -Continue
            }
            foreach ($row in $results) {
                if ((Test-Bound -Not -ParameterName Option) -or ($row[0] -in $Option)) {
                    [PSCustomObject]@{
                        ComputerName = $server.ComputerName
                        InstanceName = $server.ServiceName
                        SqlInstance  = $server.DomainInstanceName
                        Option       = $row[0]
                        Value        = $row[1]
                    }
                }
            }
        }
    }
}

tools\dbatools\functions\Get-DbaPageFileSetting.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#

function Get-DbaPageFileSetting {
    <#
    .SYNOPSIS
        Returns information on the page file configuration of the target computer.

    .DESCRIPTION
        This command uses CIM (or other, related computer management tools) to detect the page file configuration of the target computer(s).

        Note that this may require local administrator privileges for the relevant computers.

    .PARAMETER ComputerName
        The target SQL Server instance or instances.
        This can be the name of a computer, a SMO object, an IP address, an AD Computer object, a connection string or a SQL Instance.

    .PARAMETER Credential
        Credential object used to connect to the Computer as a different user

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: CIM
        Author: Klaas Vandenberghe (@PowerDBAKlaas)

        dbatools PowerShell module (https://dbatools.io)
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaPageFileSetting

    .EXAMPLE
        PS C:\> Get-DbaPageFileSetting -ComputerName ServerA,ServerB

        Returns a custom object displaying ComputerName, AutoPageFile, FileName, Status, LastModified, LastAccessed, AllocatedBaseSize, InitialSize, MaximumSize, PeakUsage, CurrentUsage  for ServerA and ServerB

    .EXAMPLE
        PS C:\> 'ServerA' | Get-DbaPageFileSetting

        Returns a custom object displaying ComputerName, AutoPageFile, FileName, Status, LastModified, LastAccessed, AllocatedBaseSize, InitialSize, MaximumSize, PeakUsage, CurrentUsage  for ServerA

    #>
    [CmdletBinding()]
    param (
        [Parameter(Position = 0, ValueFromPipeline, ValueFromPipelineByPropertyName = $true)]
        [Alias("cn", "host", "ServerInstance", "Server", "SqlServer")]
        [DbaInstance[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [Alias('Silent')]
        [switch]$EnableException
    )
    process {
        foreach ($computer in $ComputerName) {
            $splatDbaCmObject = @{
                ComputerName    = $computer
                EnableException = $true
            }
            if ($Credential) { $splatDbaCmObject["Credential"] = $Credential }

            try {
                $compSys = Get-DbaCmObject @splatDbaCmObject -Query "SELECT * FROM win32_computersystem"
                if (-not $CompSys.automaticmanagedpagefile) {
                    $pagefiles = Get-DbaCmObject @splatDbaCmObject -Query "SELECT * FROM win32_pagefile"
                    $pagefileUsages = Get-DbaCmObject @splatDbaCmObject -Query "SELECT * FROM win32_pagefileUsage"
                    $pagefileSettings = Get-DbaCmObject @splatDbaCmObject -Query "SELECT * FROM win32_pagefileSetting"
                }
            } catch {
                Stop-Function -Message "Failed to retrieve information from $($computer.ComputerName)" -ErrorRecord $_ -Target $computer -Continue
            }

            if (-not $CompSys.automaticmanagedpagefile) {
                foreach ($file in $pagefiles) {
                    $settings = $pagefileSettings | Where-Object Name -EQ $file.Name
                    $usage = $pagefileUsages | Where-Object Name -EQ $file.Name

                    # pagefile is not automatic managed, so return settings
                    New-Object Sqlcollaborative.Dbatools.Computer.PageFileSetting -Property @{
                        ComputerName      = $computer.ComputerName
                        AutoPageFile      = $CompSys.automaticmanagedpagefile
                        FileName          = $file.name
                        Status            = $file.status
                        SystemManaged     = ($settings.InitialSize -eq 0) -and ($settings.MaximumSize -eq 0)
                        LastModified      = $file.LastModified
                        LastAccessed      = $file.LastAccessed
                        AllocatedBaseSize = $usage.AllocatedBaseSize # in MB, between Initial and Maximum Size
                        InitialSize       = $settings.InitialSize # in MB
                        MaximumSize       = $settings.MaximumSize # in MB
                        PeakUsage         = $usage.peakusage # in MB
                        CurrentUsage      = $usage.currentusage # in MB
                    }
                }
            } else {
                # pagefile is automatic managed, so there are no settings
                New-Object Sqlcollaborative.Dbatools.Computer.PageFileSetting -Property @{
                    ComputerName      = $computer
                    AutoPageFile      = $CompSys.automaticmanagedpagefile
                    FileName          = $null
                    Status            = $null
                    SystemManaged     = $null
                    LastModified      = $null
                    LastAccessed      = $null
                    AllocatedBaseSize = $null
                    InitialSize       = $null
                    MaximumSize       = $null
                    PeakUsage         = $null
                    CurrentUsage      = $null
                }
            }
        }
    }
}

tools\dbatools\functions\Get-DbaPbmCategory.ps1

function Get-DbaPbmCategory {
    <#
    .SYNOPSIS
        Returns policy categories from policy based management from an instance.

    .DESCRIPTION
        Returns policy categories from policy based management from an instance.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Category
        Filters results to only show specific condition

    .PARAMETER ExcludeSystemObject
        By default system objects are include. Use this parameter to exclude them.

    .PARAMETER InputObject
        Allows piping from Get-DbaPbmStore

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Policy, PolicyBasedManagement, PBM
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaPbmCategory

    .EXAMPLE
        PS C:\> Get-DbaPbmCategory -SqlInstance sql2016

        Returns all policy categories from the sql2016 PBM server

    .EXAMPLE
        PS C:\> Get-DbaPbmCategory -SqlInstance sql2016 -SqlCredential $cred

        Uses a credential $cred to connect and return all policy categories from the sql2016 PBM server

    #>
    [CmdletBinding()]
    param (
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [string[]]$Category,
        [Parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Dmf.PolicyStore[]]$InputObject,
        [switch]$ExcludeSystemObject,
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            $InputObject += Get-DbaPbmStore -SqlInstance $instance -SqlCredential $SqlCredential
        }
        foreach ($store in $InputObject) {
            $all = $store.PolicyCategories

            if (-not $ExcludeSystemObject) {
                $all = $all | Where-Object IsSystemObject -ne $true
            }

            if ($Category) {
                $all = $all | Where-Object Name -in $Category
            }

            foreach ($current in $all) {
                Write-Message -Level Verbose -Message "Processing $current"
                Add-Member -Force -InputObject $current -MemberType NoteProperty ComputerName -value $store.ComputerName
                Add-Member -Force -InputObject $current -MemberType NoteProperty InstanceName -value $store.InstanceName
                Add-Member -Force -InputObject $current -MemberType NoteProperty SqlInstance -value $store.SqlInstance
                Select-DefaultView -InputObject $current -Property ComputerName, InstanceName, SqlInstance, Id, Name, MandateDatabaseSubscriptions
            }
        }
    }
}

tools\dbatools\functions\Get-DbaDbEncryption.ps1

function Get-DbaDbEncryption {
    <#
    .SYNOPSIS
        Returns a summary of encryption used on databases passed to it.

    .DESCRIPTION
        Shows if a database has Transparent Data Encryption (TDE), any certificates, asymmetric keys or symmetric keys with details for each.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto-populated from the server.

    .PARAMETER IncludeSystemDBs
        Switch parameter that when used will display system database information.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Encryption, Database
        Author: Stephen Bennett, https://sqlnotesfromtheunderground.wordpress.com/

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaDbEncryption

    .EXAMPLE
        PS C:\> Get-DbaDbEncryption -SqlInstance DEV01

        List all encryption found on the instance by database

    .EXAMPLE
        PS C:\> Get-DbaDbEncryption -SqlInstance DEV01 -Database MyDB

        List all encryption found for the MyDB database.

    .EXAMPLE
        PS C:\> Get-DbaDbEncryption -SqlInstance DEV01 -ExcludeDatabase MyDB

        List all encryption found for all databases except MyDB.

    .EXAMPLE
        PS C:\> Get-DbaDbEncryption -SqlInstance DEV01 -IncludeSystemDBs

        List all encryption found for all databases including the system databases.

    #>
    [CmdletBinding()]
    param (
        [parameter(ValueFromPipeline, Mandatory)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [switch]$IncludeSystemDBs,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            #For each SQL Server in collection, connect and get SMO object

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            #If IncludeSystemDBs is true, include systemdbs
            #only look at online databases (Status equal normal)
            try {
                if ($Database) {
                    $dbs = $server.Databases | Where-Object Name -In $Database
                } elseif ($IncludeSystemDBs) {
                    $dbs = $server.Databases | Where-Object IsAccessible
                } else {
                    $dbs = $server.Databases | Where-Object { $_.IsAccessible -and $_.IsSystemObject -eq 0 }
                }

                if ($ExcludeDatabase) {
                    $dbs = $dbs | Where-Object Name -NotIn $ExcludeDatabase
                }
            } catch {
                Stop-Function -Message "Unable to gather dbs for $instance" -Target $instance -Continue
            }

            foreach ($db in $dbs) {
                Write-Message -Level Verbose -Message "Processing $db"

                if ($db.EncryptionEnabled -eq $true) {
                    [PSCustomObject]@{
                        ComputerName             = $server.ComputerName
                        InstanceName             = $server.ServiceName
                        SqlInstance              = $server.DomainInstanceName
                        Database                 = $db.Name
                        Encryption               = "EncryptionEnabled (TDE)"
                        Name                     = $null
                        LastBackup               = $null
                        PrivateKeyEncryptionType = $null
                        EncryptionAlgorithm      = $null
                        KeyLength                = $null
                        Owner                    = $null
                        Object                   = $null
                        ExpirationDate           = $null
                    }

                }

                foreach ($cert in $db.Certificates) {
                    [PSCustomObject]@{
                        ComputerName             = $server.ComputerName
                        InstanceName             = $server.ServiceName
                        SqlInstance              = $server.DomainInstanceName
                        Database                 = $db.Name
                        Encryption               = "Certificate"
                        Name                     = $cert.Name
                        LastBackup               = $cert.LastBackupDate
                        PrivateKeyEncryptionType = $cert.PrivateKeyEncryptionType
                        EncryptionAlgorithm      = $null
                        KeyLength                = $null
                        Owner                    = $cert.Owner
                        Object                   = $cert
                        ExpirationDate           = $cert.ExpirationDate
                    }

                }

                foreach ($ak in $db.AsymmetricKeys) {
                    [PSCustomObject]@{
                        ComputerName             = $server.ComputerName
                        InstanceName             = $server.ServiceName
                        SqlInstance              = $server.DomainInstanceName
                        Database                 = $db.Name
                        Encryption               = "Asymmetric key"
                        Name                     = $ak.Name
                        LastBackup               = $null
                        PrivateKeyEncryptionType = $ak.PrivateKeyEncryptionType
                        EncryptionAlgorithm      = $ak.KeyEncryptionAlgorithm
                        KeyLength                = $ak.KeyLength
                        Owner                    = $ak.Owner
                        Object                   = $ak
                        ExpirationDate           = $null
                    }

                }
                foreach ($sk in $db.SymmetricKeys) {
                    [PSCustomObject]@{
                        Server                   = $server.name
                        Instance                 = $server.InstanceName
                        Database                 = $db.Name
                        Encryption               = "Symmetric key"
                        Name                     = $sk.Name
                        LastBackup               = $null
                        PrivateKeyEncryptionType = $sk.PrivateKeyEncryptionType
                        EncryptionAlgorithm      = $ak.EncryptionAlgorithm
                        KeyLength                = $sk.KeyLength
                        Owner                    = $sk.Owner
                        Object                   = $sk
                        ExpirationDate           = $null
                    }
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Get-DbaDatabaseEncryption
    }
}

tools\dbatools\functions\Get-DbaDbExtentDiff.ps1

function Get-DbaDbExtentDiff {
    <#
    .SYNOPSIS
        What percentage of a database has changed since the last full backup

    .DESCRIPTION
        This is only an implementation of the script created by Paul S. Randal to find what percentage of a database has changed since the last full backup.
        https://www.sqlskills.com/blogs/paul/new-script-how-much-of-the-database-has-changed-since-the-last-full-backup/

    .PARAMETER SqlInstance
        The target SQL Server instance

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto-populated from the server

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Backup, Database
        Author: Viorel Ciucu, cviorel.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: GNU GPL v3 https://opensource.org/licenses/GPL-3.0

    .LINK
        http://dbatools.io/Get-DbaDbExtentDiff

    .EXAMPLE
        PS C:\> Get-DbaDbExtentDiff -SqlInstance SQL2016 -Database DBA

        Get the changes for the DBA database.

    .EXAMPLE
        PS C:\> $Cred = Get-Credential sqladmin
        PS C:\> Get-DbaDbExtentDiff -SqlInstance SQL2017N1, SQL2017N2, SQL2016 -Database DB01 -SqlCredential $Cred

        Get the changes for the DB01 database on multiple servers.

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias('ServerInstance', 'SqlServer')]
        [DbaInstance[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [switch]$EnableException
    )

    begin {
        $rex = [regex]':(?<extent>[\d]+)\)'
        function Get-DbaExtent ([string[]]$field) {
            $res = 0
            foreach ($f in $field) {
                $extents = $rex.Matches($f)
                if ($extents.Count -eq 1) {
                    $res += 1
                } else {
                    $pages = [int]$extents[1].Groups['extent'].Value - [int]$extents[0].Groups['extent'].Value
                    $res += $pages / 8 + 1
                }
            }
            return $res
        }
    }

    process {

        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -NonPooled
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $dbs = $server.Databases

            if ($Database) {
                $dbs = $dbs | Where-Object Name -In $Database
            }

            if ($ExcludeDatabase) {
                $dbs = $dbs | Where-Object Name -NotIn $ExcludeDatabase
            }

            $sourcedbs = @()
            foreach ($db in $dbs) {
                if ($db.IsAccessible -ne $true) {
                    Write-Message -Level Verbose -Message "$db is not accessible on $instance, skipping"
                } else {
                    $sourcedbs += $db
                }
            }

            #Available from 2016 SP2
            if ($server.Version -ge [version]'13.0.5026') {
                foreach ($db in $sourcedbs) {
                    $DBCCPageQueryDMV = "
                        SELECT
                        SUM(total_page_count) / 8 as [ExtentsTotal],
                        SUM(modified_extent_page_count) / 8 as [ExtentsChanged],
                        100.0 * SUM(modified_extent_page_count)/SUM(total_page_count) as [ChangedPerc]
                        FROM sys.dm_db_file_space_usage
                    "
                    $DBCCPageResults = $server.Query($DBCCPageQueryDMV, $db.Name)
                    [pscustomobject]@{
                        ComputerName   = $server.ComputerName
                        InstanceName   = $server.ServiceName
                        SqlInstance    = $server.DomainInstanceName
                        DatabaseName   = $db.Name
                        ExtentsTotal   = $DBCCPageResults.ExtentsTotal
                        ExtentsChanged = $DBCCPageResults.ExtentsChanged
                        ChangedPerc    = [math]::Round($DBCCPageResults.ChangedPerc, 2)
                    }
                }
            } else {
                $MasterFilesQuery = "
                        SELECT [file_id], [size], database_id, db_name(database_id) as dbname FROM master.sys.master_files
                        WHERE [type_desc] = N'ROWS'
                    "
                $MasterFiles = $server.Query($MasterFilesQuery)
                $MasterFiles = $MasterFiles | Where-Object dbname -In $sourcedbs.Name
                $MasterFilesGrouped = $MasterFiles | Group-Object -Property dbname

                foreach ($db in $MasterFilesGrouped) {
                    $sizeTotal = 0
                    $dbExtents = @()
                    foreach ($results in $db.Group) {
                        $extentID = 0
                        $sizeTotal = $sizeTotal + $results.size / 8
                        while ($extentID -lt $results.size) {
                            $pageID = $extentID + 6
                            $DBCCPageQuery = "DBCC PAGE ('$($results.dbname)', $($results.file_id), $pageID, 3)  WITH TABLERESULTS, NO_INFOMSGS"
                            $DBCCPageResults = $server.Query($DBCCPageQuery)
                            $dbExtents += $DBCCPageResults | Where-Object { $_.VALUE -eq '    CHANGED' -And $_.ParentObject -like 'DIFF_MAP*'}
                            $extentID = $extentID + 511232
                        }
                    }
                    $extents = Get-DbaExtent $dbExtents.Field
                    [pscustomobject]@{
                        ComputerName   = $server.ComputerName
                        InstanceName   = $server.ServiceName
                        SqlInstance    = $server.DomainInstanceName
                        DatabaseName   = $db.Name
                        ExtentsTotal   = $sizeTotal
                        ExtentsChanged = $extents
                        ChangedPerc    = [math]::Round(($extents / $sizeTotal * 100), 2)
                    }
                }
            }
        }
    }
}

tools\dbatools\functions\Get-DbaDbFeatureUsage.ps1

function Get-DbaDbFeatureUsage {
    <#
    .SYNOPSIS
        Shows features that are enabled in the database but not supported on all editions of SQL Server. Basically checks for Enterprise feature usage.

    .DESCRIPTION
        Shows features that are enabled in the database but not supported on all editions of SQL Server.

        Basically checks for Enterprise feature usage.

        This feature must be removed before the database can be migrated to all available editions of SQL Server.

    .PARAMETER SqlInstance
        The target SQL Server instance

    .PARAMETER SqlCredential
        Login to the target instance using alternate Windows or SQL Login Authentication. Accepts credential objects (Get-Credential).

    .PARAMETER Database
        The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto-populated from the server

    .PARAMETER InputObject
        A collection of databases (such as returned by Get-DbaDatabase), to be tested.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Deprecated
        Author: Brandon Abshire, netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaDbFeatureUsage

    .EXAMPLE
        PS C:\> Get-DbaDatabase -SqlInstance sql2008 -Database testdb, db2 | Get-DbaDbFeatureUsage

        Shows features that are enabled in the testdb and db2 databases but
        not supported on the all the editions of SQL Server.

    #>
    [CmdletBinding()]
    param (
        [Alias("ServerInstance", "SqlServer", "SqlServers")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$Database,
        [string[]]$ExcludeDatabase,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Database[]]$InputObject,
        [switch]$EnableException
    )

    begin {
        $sql = "SELECT  SERVERPROPERTY('MachineName') AS ComputerName,
            ISNULL(SERVERPROPERTY('InstanceName'), 'MSSQLSERVER') AS InstanceName,
            SERVERPROPERTY('ServerName') AS SqlInstance, feature_id as Id,
            feature_name as Feature,  DB_NAME() as [Database] FROM sys.dm_db_persisted_sku_features"
    }

    process {
        foreach ($instance in $SqlInstance) {
            $InputObject += Get-DbaDatabase -SqlInstance $instance -SqlCredential $SqlCredential -Database $Database -ExcludeDatabase $ExcludeDatabase
        }
        foreach ($db in $InputObject) {
            Write-Message -Level Verbose -Message "Processing $db on $($db.Parent.Name)"

            if ($db.IsAccessible -eq $false) {
                Stop-Function -Message "The database $db is not accessible. Skipping database." -Continue
            }

            try {
                $db.Query($sql)
            } catch {
                Stop-Function -Message "Failure" -ErrorRecord $_ -Continue
            }
        }
    }
}

tools\dbatools\functions\Get-DbaDbForeignKey.ps1

function Get-DbaDbForeignKey {
    <#
    .SYNOPSIS
        Gets database Foreign Keys.

    .DESCRIPTION
        Gets database Foreign Keys.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances

    .PARAMETER SqlCredential
        Allows you to login to SQL Server using alternative credentials

    .PARAMETER Database
        To get Foreign Keys from specific database(s)

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto populated from the server

    .PARAMETER ExcludeSystemTable
        This switch removes all system objects from the tables collection

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Database,ForeignKey, Table
        Author: Claudio Silva (@ClaudioESSilva), https://claudioessilva.eu

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Get-DbaDbForeignKey -SqlInstance sql2016

        Gets all database Foreign Keys.

    .EXAMPLE
        PS C:\> Get-DbaDbForeignKey -SqlInstance Server1 -Database db1

        Gets the Foreign Keys for the db1 database.

    .EXAMPLE
        PS C:\> Get-DbaDbForeignKey -SqlInstance Server1 -ExcludeDatabase db1

        Gets the Foreign Keys for all databases except db1.

    .EXAMPLE
        PS C:\> Get-DbaDbForeignKey -SqlInstance Server1 -ExcludeSystemTable

        Gets the Foreign Keys from all tables that are not system objects from all databases.

    .EXAMPLE
        PS C:\> 'Sql1','Sql2/sqlexpress' | Get-DbaDbForeignKey

        Gets the Foreign Keys for the databases on Sql1 and Sql2/sqlexpress.

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [switch]$ExcludeSystemTable,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $databases = $server.Databases | Where-Object IsAccessible

            if ($Database) {
                $databases = $databases | Where-Object Name -In $Database
            }
            if ($ExcludeDatabase) {
                $databases = $databases | Where-Object Name -NotIn $ExcludeDatabase
            }

            foreach ($db in $databases) {
                if (!$db.IsAccessible) {
                    Write-Message -Level Warning -Message "Database $db is not accessible. Skipping."
                    continue
                }

                foreach ($tbl in $db.Tables) {
                    if ( (Test-Bound -ParameterName ExcludeSystemTable) -and $tbl.IsSystemObject ) {
                        continue
                    }

                    if ($tbl.ForeignKeys.Count -eq 0) {
                        Write-Message -Message "No Foreign Keys exist in $tbl table on the $db database on $instance" -Target $tbl -Level Verbose
                        continue
                    }

                    foreach ($fk in $tbl.ForeignKeys) {
                        Add-Member -Force -InputObject $fk -MemberType NoteProperty -Name ComputerName -value $server.ComputerName
                        Add-Member -Force -InputObject $fk -MemberType NoteProperty -Name InstanceName -value $server.ServiceName
                        Add-Member -Force -InputObject $fk -MemberType NoteProperty -Name SqlInstance -value $server.DomainInstanceName
                        Add-Member -Force -InputObject $fk -MemberType NoteProperty -Name Database -value $db.Name

                        $defaults = 'ComputerName', 'InstanceName', 'SqlInstance', 'Database', 'Table', 'ID', 'CreateDate',
                        'DateLastModified', 'Name', 'IsEnabled', 'IsChecked', 'NotForReplication', 'ReferencedKey', 'ReferencedTable', 'ReferencedTableSchema'
                        Select-DefaultView -InputObject $fk -Property $defaults
                    }
                }
            }
        }
    }
}

tools\dbatools\functions\Get-DbaDbMailHistory.ps1

function Get-DbaDbMailHistory {
    <#
    .SYNOPSIS
        Gets the history of mail sent from a SQL instance

    .DESCRIPTION
        Gets the history of mail sent from a SQL instance

    .PARAMETER SqlInstance
        TThe target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Allows you to login to servers using SQL Logins as opposed to Windows Auth/Integrated/Trusted.

    .PARAMETER Since
        Datetime object used to narrow the results to the send request date

    .PARAMETER Status
        Narrow the results by status. Valid values include Unsent, Sent, Failed and Retrying

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: DatabaseMail, DBMail, Mail
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaDbMailHistory

    .EXAMPLE
        PS C:\> Get-DbaDbMailHistory -SqlInstance sql01\sharepoint

        Returns the entire DBMail history on sql01\sharepoint

    .EXAMPLE
        PS C:\> Get-DbaDbMailHistory -SqlInstance sql01\sharepoint | Select *

        Returns the entire DBMail history on sql01\sharepoint then return a bunch more columns

    .EXAMPLE
        PS C:\> $servers = "sql2014","sql2016", "sqlcluster\sharepoint"
        PS C:\> $servers | Get-DbaDbMailHistory

        Returns the all DBMail history for "sql2014","sql2016" and "sqlcluster\sharepoint"

    #>
    [CmdletBinding()]
    param (
        [Parameter(ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]
        $SqlCredential,
        [DateTime]$Since,
        [ValidateSet('Unsent', 'Sent', 'Failed', 'Retrying')]
        [string]$Status,
        [Alias('Silent')]
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category Connectiondbmail -dbmailRecord $_ -Target $instance -Continue
            }

            $sql = "SELECT SERVERPROPERTY('MachineName') AS ComputerName,
                    ISNULL(SERVERPROPERTY('InstanceName'), 'MSSQLSERVER') AS InstanceName,
                    SERVERPROPERTY('ServerName') AS SqlInstance,
                    mailitem_id as MailItemId,
                    a.profile_id as ProfileId,
                    p.name as Profile,
                    recipients as Recipients,
                    copy_recipients as CopyRecipients,
                    blind_copy_recipients as BlindCopyRecipients,
                    subject as Subject,
                    body as Body,
                    body_format as BodyFormat,
                    importance as Importance,
                    sensitivity as Sensitivity,
                    file_attachments as FileAttachments,
                    attachment_encoding as AttachmentEncoding,
                    query as Query,
                    execute_query_database as ExecuteQueryDatabase,
                    attach_query_result_as_file as AttachQueryResultAsFile,
                    query_result_header as QueryResultHeader,
                    query_result_width as QueryResultWidth,
                    query_result_separator as QueryResultSeparator,
                    exclude_query_output as ExcludeQueryOutput,
                    append_query_error as AppendQueryError,
                    send_request_date as SendRequestDate,
                    send_request_user as SendRequestUser,
                    sent_account_id as SentAccountId,
                    CASE sent_status
                    WHEN 'unsent' THEN 'Unsent'
                    WHEN 'sent' THEN 'Sent'
                    WHEN 'failed' THEN 'Failed'
                    WHEN 'retrying' THEN 'Retrying'
                    END AS SentStatus,
                    sent_date as SentDate,
                    last_mod_date as LastModDate,
                    a.last_mod_user as LastModUser
                    from msdb.dbo.sysmail_allitems a
                    join msdb.dbo.sysmail_profile p
                    on a.profile_id = p.profile_id"

            if ($Since -or $Status) {
                $wherearray = @()

                if ($Since) {
                    $wherearray += "send_request_date >= '$($Since.ToString("yyyy-MM-ddTHH:mm:ss"))'"
                }

                if ($Status) {
                    $Status = $Status -join "', '"
                    $wherearray += "sent_status in ('$Status')"
                }

                $wherearray = $wherearray -join ' and '
                $where = "where $wherearray"
                $sql = "$sql $where"
            }

            Write-Message -Level Debug -Message $sql

            try {
                $server.Query($sql) | Select-DefaultView -Property ComputerName, InstanceName, SqlInstance, Profile, Recipients, CopyRecipients, BlindCopyRecipients, Subject, Importance, Sensitivity, FileAttachments, AttachmentEncoding, SendRequestDate, SendRequestUser, SentStatus, SentDate
            } catch {
                Stop-Function -Message "Query failure" -ErrorRecord $_ -Continue
            }
        }
    }
}

tools\dbatools\functions\Get-DbaPermission.ps1

function Get-DbaPermission {
    <#
    .SYNOPSIS
        Get a list of Server and Database level permissions

    .DESCRIPTION
        Retrieves a list of permissions

        Permissions link principals to securables.
        Principals exist on Windows, Instance and Database level.
        Securables exist on Instance and Database level.
        A permission state can be GRANT, DENY or REVOKE.
        The permission type can be SELECT, CONNECT, EXECUTE and more.

        See https://msdn.microsoft.com/en-us/library/ms191291.aspx for more information

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. Defaults to localhost.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        Specifies one or more database(s) to process. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        Specifies one or more database(s) to exclude from processing.

    .PARAMETER IncludeServerLevel
        If this switch is enabled, information about Server Level Permissions will be output.

    .PARAMETER ExcludeSystemObjects
        If this switch is enabled, permissions on system securables will be excluded.

    .PARAMETER EnableException
        If this switch is enabled exceptions will be thrown to the caller, which will need to perform its own exception processing. Otherwise, the function will try to catch the exception, interpret it and provide a friendly error message.

    .NOTES
        Tags: Permissions, Databases
        Author: Klaas Vandenberghe (@PowerDBAKlaas)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaPermission

    .EXAMPLE
        PS C:\> Get-DbaPermission -SqlInstance ServerA\sql987

        Returns a custom object with Server name, Database name, permission state, permission type, grantee and securable.

    .EXAMPLE
        PS C:\> Get-DbaPermission -SqlInstance ServerA\sql987 | Format-Table -AutoSize

        Returns a formatted table displaying Server, Database, permission state, permission type, grantee, granteetype, securable and securabletype.

    .EXAMPLE
        PS C:\> Get-DbaPermission -SqlInstance ServerA\sql987 -ExcludeSystemObjects -IncludeServerLevel

        Returns a custom object with Server name, Database name, permission state, permission type, grantee and securable
        in all databases and on the server level, but not on system securables.

    .EXAMPLE
        PS C:\> Get-DbaPermission -SqlInstance sql2016 -Database master

        Returns a custom object with permissions for the master database.

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstance[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [switch]$IncludeServerLevel,
        [switch]$ExcludeSystemObjects,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {
        if ($ExcludeSystemObjects) {
            $ExcludeSystemObjectssql = "WHERE major_id > 0 "
        }

        $ServPermsql = "SELECT SERVERPROPERTY('MachineName') AS ComputerName,
                       ISNULL(SERVERPROPERTY('InstanceName'), 'MSSQLSERVER') AS InstanceName,
                       SERVERPROPERTY('ServerName') AS SqlInstance
                        , [Database] = ''
                        , [PermState] = state_desc
                        , [PermissionName] = permission_name
                        , [SecurableType] = COALESCE(o.type_desc,sp.class_desc)
                        , [Securable] = CASE	WHEN class = 100 THEN @@SERVERNAME
                                                WHEN class = 105 THEN OBJECT_NAME(major_id)
                                                ELSE OBJECT_NAME(major_id)
                                                END
                        , [Grantee] = SUSER_NAME(grantee_principal_id)
                        , [GranteeType] = pr.type_desc
                        , [revokeStatement] = 'REVOKE ' + permission_name + ' ' + COALESCE(OBJECT_NAME(major_id),'') + ' FROM [' + SUSER_NAME(grantee_principal_id) + ']'
                        , [grantStatement] = 'GRANT ' + permission_name + ' ' + COALESCE(OBJECT_NAME(major_id),'') + ' TO [' + SUSER_NAME(grantee_principal_id) + ']'
                    FROM sys.server_permissions sp
                        JOIN sys.server_principals pr ON pr.principal_id = sp.grantee_principal_id
                        LEFT OUTER JOIN sys.all_objects o ON o.object_id = sp.major_id

                    $ExcludeSystemObjectssql

                    UNION ALL
                    SELECT	  SERVERPROPERTY('MachineName') AS ComputerName
                            , ISNULL(SERVERPROPERTY('InstanceName'), 'MSSQLSERVER') AS InstanceName
                            , SERVERPROPERTY('ServerName') AS SqlInstance
                            , [database] = ''
                            , [PermState] = 'GRANT'
                            , [PermissionName] = pb.[permission_name]
                            , [SecurableType] = pb.class_desc
                            , [Securable] = @@SERVERNAME
                            , [Grantee] = spr.name
                            , [GranteeType] = spr.type_desc
                            , [revokestatement] = ''
                            , [grantstatement] = ''
                    FROM sys.server_principals AS spr
                    INNER JOIN sys.fn_builtin_permissions('SERVER') AS pb ON
                        spr.[name]='bulkadmin' AND pb.[permission_name]='ADMINISTER BULK OPERATIONS'
                        OR
                        spr.[name]='dbcreator' AND pb.[permission_name]='CREATE ANY DATABASE'
                        OR
                        spr.[name]='diskadmin' AND pb.[permission_name]='ALTER RESOURCES'
                        OR
                        spr.[name]='processadmin' AND pb.[permission_name] IN ('ALTER ANY CONNECTION', 'ALTER SERVER STATE')
                        OR
                        spr.[name]='sysadmin' AND pb.[permission_name]='CONTROL SERVER'
                        OR
                        spr.[name]='securityadmin' AND pb.[permission_name]='ALTER ANY LOGIN'
                        OR
                        spr.[name]='serveradmin'  AND pb.[permission_name] IN ('ALTER ANY ENDPOINT', 'ALTER RESOURCES','ALTER SERVER STATE', 'ALTER SETTINGS','SHUTDOWN', 'VIEW SERVER STATE')
                        OR
                        spr.[name]='setupadmin' AND pb.[permission_name]='ALTER ANY LINKED SERVER'
                    WHERE spr.[type]='R'
                    ;"

        $DBPermsql = "SELECT SERVERPROPERTY('MachineName') AS ComputerName,
                    ISNULL(SERVERPROPERTY('InstanceName'), 'MSSQLSERVER') AS InstanceName,
                    SERVERPROPERTY('ServerName') AS SqlInstance
                    , [Database] = DB_NAME()
                    , [PermState] = state_desc
                    , [PermissionName] = permission_name
                    , [SecurableType] = COALESCE(o.type_desc,dp.class_desc)
                    , [Securable] = CASE	WHEN class = 0 THEN DB_NAME()
                                            WHEN class = 1 THEN ISNULL(s.name + '.','')+OBJECT_NAME(major_id)
                                            WHEN class = 3 THEN SCHEMA_NAME(major_id)
                                            WHEN class = 6 THEN SCHEMA_NAME(t.schema_id)+'.' + t.name
                                            END
                    , [Grantee] = USER_NAME(grantee_principal_id)
                    , [GranteeType] = pr.type_desc
                    , [revokeStatement] = 'REVOKE ' + permission_name + ' ON ' + isnull(schema_name(o.object_id)+'.','')+OBJECT_NAME(major_id)+ ' FROM [' + USER_NAME(grantee_principal_id) + ']'
                    , [grantStatement] = 'GRANT ' + permission_name + ' ON ' + isnull(schema_name(o.object_id)+'.','')+OBJECT_NAME(major_id)+ ' TO [' + USER_NAME(grantee_principal_id) + ']'
                FROM sys.database_permissions dp
                    JOIN sys.database_principals pr ON pr.principal_id = dp.grantee_principal_id
                    LEFT OUTER JOIN sys.all_objects o ON o.object_id = dp.major_id
                    LEFT OUTER JOIN sys.schemas s ON s.schema_id = o.schema_id
                    LEFT OUTER JOIN sys.types t on t.user_type_id = dp.major_id

                $ExcludeSystemObjectssql

                UNION ALL
                SELECT	  SERVERPROPERTY('MachineName') AS ComputerName
                        , ISNULL(SERVERPROPERTY('InstanceName'), 'MSSQLSERVER') AS InstanceName
                        , SERVERPROPERTY('ServerName') AS SqlInstance
                        , [database] = DB_NAME()
                        , [PermState] = ''
                        , [PermissionName] = p.[permission_name]
                        , [SecurableType] = p.class_desc
                        , [Securable] = DB_NAME()
                        , [Grantee] = dp.name
                        , [GranteeType] = dp.type_desc
                        , [revokestatement] = ''
                        , [grantstatement] = ''
                FROM sys.database_principals AS dp
                INNER JOIN sys.fn_builtin_permissions('DATABASE') AS p ON
                    dp.[name]='db_accessadmin' AND p.[permission_name] IN ('ALTER ANY USER', 'CREATE SCHEMA')
                    OR
                    dp.[name]='db_backupoperator' AND p.[permission_name] IN ('BACKUP DATABASE', 'BACKUP LOG', 'CHECKPOINT')
                    OR
                    dp.[name] IN ('db_datareader', 'db_denydatareader') AND p.[permission_name]='SELECT'
                    OR
                    dp.[name] IN ('db_datawriter', 'db_denydatawriter') AND p.[permission_name] IN ('INSERT', 'DELETE', 'UPDATE')
                    OR
                    dp.[name]='db_ddladmin' AND
                    p.[permission_name] IN ('ALTER ANY ASSEMBLY', 'ALTER ANY ASYMMETRIC KEY',
                                            'ALTER ANY CERTIFICATE', 'ALTER ANY CONTRACT',
                                            'ALTER ANY DATABASE DDL TRIGGER', 'ALTER ANY DATABASE EVENT',
                                            'NOTIFICATION', 'ALTER ANY DATASPACE', 'ALTER ANY FULLTEXT CATALOG',
                                            'ALTER ANY MESSAGE TYPE', 'ALTER ANY REMOTE SERVICE BINDING',
                                            'ALTER ANY ROUTE', 'ALTER ANY SCHEMA', 'ALTER ANY SERVICE',
                                            'ALTER ANY SYMMETRIC KEY', 'CHECKPOINT', 'CREATE AGGREGATE',
                                            'CREATE DEFAULT', 'CREATE FUNCTION', 'CREATE PROCEDURE',
                                            'CREATE QUEUE', 'CREATE RULE', 'CREATE SYNONYM', 'CREATE TABLE',
                                            'CREATE TYPE', 'CREATE VIEW', 'CREATE XML SCHEMA COLLECTION',
                                            'REFERENCES')
                    OR
                    dp.[name]='db_owner' AND p.[permission_name]='CONTROL'
                    OR
                    dp.[name]='db_securityadmin' AND p.[permission_name] IN ('ALTER ANY APPLICATION ROLE', 'ALTER ANY ROLE', 'CREATE SCHEMA', 'VIEW DEFINITION')

                WHERE dp.[type]='R'
                    AND dp.is_fixed_role=1
                ;"
    }

    process {
        foreach ($instance in $SqlInstance) {

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            if ($IncludeServerLevel) {
                Write-Message -Level Debug -Message "T-SQL: $ServPermsql"
                $server.Query($ServPermsql)
            }

            $dbs = $server.Databases

            if ($Database) {
                $dbs = $dbs | Where-Object Name -In $Database
            }

            if ($ExcludeDatabase) {
                $dbs = $dbs | Where-Object Name -NotIn $ExcludeDatabase
            }

            foreach ($db in $dbs) {
                Write-Message -Level Verbose -Message "Processing $db on $instance."

                if ($db.IsAccessible -eq $false) {
                    Write-Message -Level Warning -Message "The database $db is not accessible. Skipping database."
                    Continue
                }

                Write-Message -Level Debug -Message "T-SQL: $DBPermsql"
                $db.ExecuteWithResults($DBPermsql).Tables.Rows
            }
        }
    }
}

tools\dbatools\functions\Get-DbaPfAvailableCounter.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaPfAvailableCounter {
    <#
    .SYNOPSIS
        Gathers list of all available counters on local or remote machines.

    .DESCRIPTION
        Gathers list of all available counters on local or remote machines. Note, if you pass a credential object, it will be included in the output for easy reuse in your next piped command.

        Thanks to Daniel Streefkerk for this super fast way of counters
        https://daniel.streefkerkonline.com/2016/02/18/use-powershell-to-list-all-windows-performance-counters-and-their-numeric-ids

    .PARAMETER ComputerName
        The target computer. Defaults to localhost.

    .PARAMETER Credential
        Allows you to login to servers using alternative credentials. To use:

        $scred = Get-Credential, then pass $scred object to the -Credential parameter.

    .PARAMETER Pattern
        Specify a pattern for filtering.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Performance, DataCollector, PerfCounter
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaPfAvailableCounter

    .EXAMPLE
        PS C:\> Get-DbaPfAvailableCounter

        Gets all available counters on the local machine.

    .EXAMPLE
        PS C:\> Get-DbaPfAvailableCounter -Pattern *sql*

        Gets all counters matching sql on the local machine.

    .EXAMPLE
        PS C:\> Get-DbaPfAvailableCounter -ComputerName sql2017 -Pattern *sql*

        Gets all counters matching sql on the remote server sql2017.

    .EXAMPLE
        PS C:\> Get-DbaPfAvailableCounter -Pattern *sql*

        Gets all counters matching sql on the local machine.

    .EXAMPLE
        PS C:\> Get-DbaPfAvailableCounter -Pattern *sql* | Add-DbaPfDataCollectorCounter -CollectorSet 'Test Collector Set' -Collector DataCollector01

        Adds all counters matching "sql" to the DataCollector01 within the 'Test Collector Set' CollectorSet.

    #>
    [CmdletBinding()]
    param (
        [DbaInstance[]]$ComputerName = $env:ComputerName,
        [PSCredential]$Credential,
        [string]$Pattern,
        [switch]$EnableException
    )
    begin {
        $scriptblock = {
            $counters = Get-ItemProperty -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Perflib\009' -Name 'counter' | Select-Object -ExpandProperty Counter |
                Where-Object { $_ -notmatch '[0-90000]' } | Sort-Object | Get-Unique

            foreach ($counter in $counters) {
                [pscustomobject]@{
                    ComputerName = $env:COMPUTERNAME
                    Name         = $counter
                    Credential   = $args
                }
            }
        }

        # In case people really want a "like" search, which is slower
        $Pattern = $Pattern.Replace("*", ".*").Replace("..*", ".*")
    }
    process {
        
        
        foreach ($computer in $ComputerName) {

            try {
                if ($pattern) {
                    Invoke-Command2 -ComputerName $computer -Credential $Credential -ScriptBlock $scriptblock -ArgumentList $credential -ErrorAction Stop |
                        Where-Object Name -match $pattern | Select-DefaultView -ExcludeProperty Credential
                } else {
                    Invoke-Command2 -ComputerName $computer -Credential $Credential -ScriptBlock $scriptblock -ArgumentList $credential -ErrorAction Stop |
                        Select-DefaultView -ExcludeProperty Credential
                }
            } catch {
                Stop-Function -Message "Failure" -ErrorRecord $_ -Target $computer -Continue
            }
        }
    }
}

tools\dbatools\functions\Get-DbaPfDataCollector.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaPfDataCollector {
    <#
    .SYNOPSIS
        Gets Performance Monitor Data Collectors.

    .DESCRIPTION
        Gets Performance Monitor Data Collectors.

    .PARAMETER ComputerName
        The target computer. Defaults to localhost.

    .PARAMETER Credential
        Allows you to login to servers using alternative credentials. To use:

        $scred = Get-Credential, then pass $scred object to the -Credential parameter.

    .PARAMETER CollectorSet
        The Collector Set name.

    .PARAMETER Collector
        The Collector name.

    .PARAMETER InputObject
        Accepts the object output by Get-DbaPfDataCollectorSet via the pipeline.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Performance, DataCollector, PerfCounter
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaPfDataCollector

    .EXAMPLE
        PS C:\> Get-DbaPfDataCollector

        Gets all Collectors on localhost.

    .EXAMPLE
        PS C:\> Get-DbaPfDataCollector -ComputerName sql2017

        Gets all Collectors on sql2017.

    .EXAMPLE
        PS C:\> Get-DbaPfDataCollector -ComputerName sql2017, sql2016 -Credential ad\sqldba -CollectorSet 'System Correlation'

        Gets all Collectors for the 'System Correlation' CollectorSet on sql2017 and sql2016 using alternative credentials.

    .EXAMPLE
        PS C:\> Get-DbaPfDataCollectorSet -CollectorSet 'System Correlation' | Get-DbaPfDataCollector

        Gets all Collectors for the 'System Correlation' CollectorSet.

    #>
    [CmdletBinding()]
    param (
        [DbaInstance[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [Alias("DataCollectorSet")]
        [string[]]$CollectorSet,
        [Alias("DataCollector")]
        [string[]]$Collector,
        [parameter(ValueFromPipeline)]
        [object[]]$InputObject,
        [switch]$EnableException
    )
    begin {
        $columns = 'ComputerName', 'DataCollectorSet', 'Name', 'DataCollectorType', 'DataSourceName', 'FileName', 'FileNameFormat', 'FileNameFormatPattern', 'LatestOutputLocation', 'LogAppend', 'LogCircular', 'LogFileFormat', 'LogOverwrite', 'SampleInterval', 'SegmentMaxRecords', 'Counters'
    }
    process {
        
        
        if ($InputObject.Credential -and (Test-Bound -ParameterName Credential -Not)) {
            $Credential = $InputObject.Credential
        }

        if (-not $InputObject -or ($InputObject -and (Test-Bound -ParameterName ComputerName))) {
            foreach ($computer in $ComputerName) {
                $InputObject += Get-DbaPfDataCollectorSet -ComputerName $computer -Credential $Credential -CollectorSet $CollectorSet
            }
        }

        if ($InputObject) {
            if (-not $InputObject.DataCollectorSetObject) {
                Stop-Function -Message "InputObject is not of the right type. Please use Get-DbaPfDataCollectorSet."
                return
            }
        }

        foreach ($set in $InputObject) {
            $collectorxml = ([xml]$set.Xml).DataCollectorSet.PerformanceCounterDataCollector
            foreach ($col in $collectorxml) {
                if ($Collector -and $Collector -notcontains $col.Name) {
                    continue
                }

                $outputlocation = $col.LatestOutputLocation
                if ($outputlocation) {
                    $dir = ($outputlocation).Replace(':', '$')
                    $remote = "\\$($set.ComputerName)\$dir"
                } else {
                    $remote = $null
                }

                [pscustomobject]@{
                    ComputerName               = $set.ComputerName
                    DataCollectorSet           = $set.Name
                    Name                       = $col.Name
                    FileName                   = $col.FileName
                    DataCollectorType          = $col.DataCollectorType
                    FileNameFormat             = $col.FileNameFormat
                    FileNameFormatPattern      = $col.FileNameFormatPattern
                    LogAppend                  = $col.LogAppend
                    LogCircular                = $col.LogCircular
                    LogOverwrite               = $col.LogOverwrite
                    LatestOutputLocation       = $col.LatestOutputLocation
                    DataCollectorSetXml        = $set.Xml
                    RemoteLatestOutputLocation = $remote
                    DataSourceName             = $col.DataSourceName
                    SampleInterval             = $col.SampleInterval
                    SegmentMaxRecords          = $col.SegmentMaxRecords
                    LogFileFormat              = $col.LogFileFormat
                    Counters                   = $col.Counter
                    CounterDisplayNames        = $col.CounterDisplayName
                    CollectorXml               = $col
                    DataCollectorObject        = $true
                    Credential                 = $Credential
                } | Select-DefaultView -Property $columns
            }
        }
    }
}

tools\dbatools\functions\Get-DbaDbMailLog.ps1

function Get-DbaDbMailLog {
    <#
    .SYNOPSIS
        Gets the DBMail log from a SQL instance

    .DESCRIPTION
        Gets the DBMail log from a SQL instance

    .PARAMETER SqlInstance
        TThe target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Allows you to login to servers using SQL Logins as opposed to Windows Auth/Integrated/Trusted.

    .PARAMETER Since
        Datetime object used to narrow the results to the send request date

    .PARAMETER Type
        Narrow the results by type. Valid values include Error, Warning, Success, Information, Internal

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: DatabaseMail, DBMail, Mail
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaDbMailLog

    .EXAMPLE
        PS C:\> Get-DbaDbMailLog -SqlInstance sql01\sharepoint

        Returns the entire DBMail log on sql01\sharepoint

    .EXAMPLE
        PS C:\> Get-DbaDbMailLog -SqlInstance sql01\sharepoint | Select *

        Returns the entire DBMail log on sql01\sharepoint, includes all returned information.

    .EXAMPLE
        PS C:\> $servers = "sql2014","sql2016", "sqlcluster\sharepoint"
        PS C:\> $servers | Get-DbaDbMailLog -Type Error, Information

        Returns only the Error and Information DBMail log for "sql2014","sql2016" and "sqlcluster\sharepoint"

    #>
    [CmdletBinding()]
    param (
        [Parameter(ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]
        $SqlCredential,
        [DateTime]$Since,
        [ValidateSet('Error', 'Warning', 'Success', 'Information', 'Internal')]
        [string[]]$Type,
        [Alias('Silent')]
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category Connectiondbmail -dbmailRecord $_ -Target $instance -Continue
            }

            $sql = "SELECT SERVERPROPERTY('MachineName') AS ComputerName,
            ISNULL(SERVERPROPERTY('InstanceName'), 'MSSQLSERVER') AS InstanceName,
            SERVERPROPERTY('ServerName') AS SqlInstance,
            log_id as LogId,
            CASE event_type
            WHEN 'error' THEN 'Error'
            WHEN 'warning' THEN 'Warning'
            WHEN 'information' THEN 'Information'
            WHEN 'success' THEN 'Success'
            WHEN 'internal' THEN 'Internal'
            ELSE event_type
            END as EventType,
            log_date as LogDate,
            REPLACE(description, CHAR(10)+')', '') as Description,
            process_id as ProcessId,
            mailitem_id as MailItemId,
            account_id as AccountId,
            last_mod_date as LastModDate,
            last_mod_user as LastModUser,
            last_mod_user as [Login]
            FROM msdb.dbo.sysmail_event_log"

            if ($Since -or $Type) {
                $wherearray = @()

                if ($Since) {
                    $wherearray += "log_date >= '$($Since.ToString("yyyy-MM-ddTHH:mm:ss"))'"
                }

                if ($Type) {
                    $combinedtype = $Type -join "', '"
                    $wherearray += "event_type in ('$combinedtype')"
                }

                $wherearray = $wherearray -join ' and '
                $where = "where $wherearray"
                $sql = "$sql $where"
            }

            Write-Message -Level Debug -Message $sql

            try {
                $server.Query($sql) | Select-DefaultView -Property ComputerName, InstanceName, SqlInstance, LogDate, EventType, Description, Login
            } catch {
                Stop-Function -Message "Failure" -InnerErrorRecord $_ -Continue
            }
        }
    }
}

tools\dbatools\functions\Get-DbaDbMemoryUsage.ps1

function Get-DbaDbMemoryUsage {
    <#
    .SYNOPSIS
        Determine buffer pool usage by database.

    .DESCRIPTION
        This command can be utilized to determine which databases on a given instance are consuming buffer pool memory.

        This command is based on query provided by Aaron Bertrand.
        Reference: https://www.mssqltips.com/sqlservertip/2393/determine-sql-server-memory-use-by-database-and-object/

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential).

    .PARAMETER Database
        The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        The database(s) to exclude.

    .PARAMETER IncludeSystemDb
        Switch to have the output include system database memory consumption.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Memory, Database
        Author: Shawn Melton (@wsmelton), https://wsmelton.github.io

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaDbMemoryUsage

    .EXAMPLE
        PS C:\> Get-DbaDbMemoryUsage -SqlInstance sqlserver2014a

        Returns the buffer pool consumption for all user databases

    .EXAMPLE
        PS C:\> Get-DbaDbMemoryUsage -SqlInstance sqlserver2014a -IncludeSystemDb

        Returns the buffer pool consumption for all user databases and system databases

    .EXAMPLE
        PS C:\> Get-DbaDbMemoryUsage -SqlInstance sql1 -IncludeSystemDb -Database tempdb

        Returns the buffer pool consumption for tempdb database only

    .EXAMPLE
        PS C:\> Get-DbaDbMemoryUsage -SqlInstance sql2 -IncludeSystemDb -Exclude 'master','model','msdb','ResourceDb'

        Returns the buffer pool consumption for all user databases and tempdb database
    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "SqlServers")]
        [DbaInstance[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [parameter(ValueFromPipelineByPropertyName = $true)]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [switch]$IncludeSystemDb,
        [switch]$EnableException
    )

    begin {
        $sql = "DECLARE @total_buffer INT;
            SELECT @total_buffer = cntr_value
            FROM sys.dm_os_performance_counters
            WHERE RTRIM([object_name]) LIKE '%Buffer Manager'
            AND counter_name = 'Database Pages';

            ;WITH src AS (
                SELECT database_id, page_type, db_buffer_pages = COUNT_BIG(*)
                FROM sys.dm_os_buffer_descriptors
                GROUP BY database_id, page_type
            )
            SELECT [DatabaseName] = CASE [database_id] WHEN 32767 THEN 'ResourceDb' ELSE DB_NAME([database_id]) END,
                page_type AS 'PageType',
                db_buffer_pages AS 'PageCount',
                (db_buffer_pages * 8)/1024 AS 'SizeMb',
                CAST(db_buffer_pages * 100.0 / @total_buffer AS FLOAT) AS 'PercentUsed'
            FROM src
            ORDER BY [DatabaseName];"
    }
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            try {
                $results = $server.Query($sql)
            } catch {
                Stop-Function -Message "Issue collecting data" -Target $instance -ErrorRecord $_
            }
            foreach ($row in $results) {
                if (Test-Bound 'Database') {
                    if ($row.DatabaseName -notin $Database) { continue }
                }
                if (Test-Bound 'ExcludeDatabase') {
                    if ($row.DatabaseName -in $ExcludeDatabase) { continue }
                }
                if (Test-Bound -Not 'IncludeSystemDb') {
                    if ($row.DatabaseName -in 'master', 'model', 'msdb', 'tempdb', 'ResourceDb') { continue }
                }

                if ($row.PercentUsed -is [System.DBNull]) {
                    $percentUsed = 0
                } else {
                    $percentUsed = [Math]::Round($row.PercentUsed)
                }

                [PSCustomObject]@{
                    ComputerName = $server.ComputerName
                    InstanceName = $server.ServiceName
                    SqlInstance  = $server.DomainInstanceName
                    Database     = $row.DatabaseName
                    PageType     = $row.PageType
                    PageCount    = [int]$row.PageCount
                    Size         = [DbaSize]$row.SizeMb * 1024
                    PercentUsed  = $percentUsed
                } | Select-DefaultView -ExcludeProperty 'PageCount'
            }
        }
    }
}

tools\dbatools\functions\Get-DbaPfDataCollectorSet.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaPfDataCollectorSet {
    <#
    .SYNOPSIS
        Gets Performance Monitor Data Collector Set.

    .DESCRIPTION
        Gets Performance Monitor Data Collector Set.

    .PARAMETER ComputerName
        The target computer. Defaults to localhost.

    .PARAMETER Credential
        Allows you to login to servers using alternative credentials. To use:

        $scred = Get-Credential, then pass $scred object to the -Credential parameter.

    .PARAMETER CollectorSet
        The Collector set name.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Performance, DataCollector, PerfCounter
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaPfDataCollectorSet

    .EXAMPLE
        PS C:\> Get-DbaPfDataCollectorSet

        Gets all Collector Sets on localhost.

    .EXAMPLE
        PS C:\> Get-DbaPfDataCollectorSet -ComputerName sql2017

        Gets all Collector Sets on sql2017.

    .EXAMPLE
        PS C:\> Get-DbaPfDataCollectorSet -ComputerName sql2017 -Credential ad\sqldba -CollectorSet 'System Correlation'

        Gets the 'System Correlation' CollectorSet on sql2017 using alternative credentials.

    .EXAMPLE
        PS C:\> Get-DbaPfDataCollectorSet | Select-Object *

        Displays extra columns and also exposes the original COM object in DataCollectorSetObject.

    #>
    [CmdletBinding()]
    param (
        [parameter(ValueFromPipeline)]
        [DbaInstance[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [Alias("DataCollectorSet")]
        [string[]]$CollectorSet,
        [switch]$EnableException
    )

    begin {
        $setscript = {
            # Get names / status info
            $schedule = New-Object -ComObject "Schedule.Service"
            $schedule.Connect()
            $folder = $schedule.GetFolder("Microsoft\Windows\PLA")
            $tasks = @()
            $tasknumber = 0
            $done = $false
            do {
                try {
                    $task = $folder.GetTasks($tasknumber)
                    $tasknumber++
                    if ($task) {
                        $tasks += $task
                    }
                } catch {
                    $done = $true
                }
            }
            while ($done -eq $false)
            $null = [System.Runtime.Interopservices.Marshal]::ReleaseComObject($schedule)

            if ($args[0]) {
                $tasks = $tasks | Where-Object Name -in $args[0]
            }

            $sets = New-Object -ComObject Pla.DataCollectorSet
            foreach ($task in $tasks) {
                $setname = $task.Name
                switch ($task.State) {
                    0 { $state = "Unknown" }
                    1 { $state = "Disabled" }
                    2 { $state = "Queued" }
                    3 { $state = "Ready" }
                    4 { $state = "Running" }
                }

                try {
                    # Query changes $sets so work from there
                    $sets.Query($setname, $null)
                    $set = $sets.PSObject.Copy()

                    $outputlocation = $set.OutputLocation
                    $latestoutputlocation = $set.LatestOutputLocation

                    if ($outputlocation) {
                        $dir = (Split-Path $outputlocation).Replace(':', '$')
                        $remote = "\\$env:COMPUTERNAME\$dir"
                    } else {
                        $remote = $null
                    }

                    if ($latestoutputlocation) {
                        $dir = ($latestoutputlocation).Replace(':', '$')
                        $remotelatest = "\\$env:COMPUTERNAME\$dir"
                    } else {
                        $remote = $null
                    }

                    [pscustomobject]@{
                        ComputerName               = $env:COMPUTERNAME
                        Name                       = $setname
                        LatestOutputLocation       = $set.LatestOutputLocation
                        OutputLocation             = $set.OutputLocation
                        RemoteOutputLocation       = $remote
                        RemoteLatestOutputLocation = $remotelatest
                        RootPath                   = $set.RootPath
                        Duration                   = $set.Duration
                        Description                = $set.Description
                        DescriptionUnresolved      = $set.DescriptionUnresolved
                        DisplayName                = $set.DisplayName
                        DisplayNameUnresolved      = $set.DisplayNameUnresolved
                        Keywords                   = $set.Keywords
                        Segment                    = $set.Segment
                        SegmentMaxDuration         = $set.SegmentMaxDuration
                        SegmentMaxSize             = $set.SegmentMaxSize
                        SerialNumber               = $set.SerialNumber
                        Server                     = $set.Server
                        Status                     = $set.Status
                        Subdirectory               = $set.Subdirectory
                        SubdirectoryFormat         = $set.SubdirectoryFormat
                        SubdirectoryFormatPattern  = $set.SubdirectoryFormatPattern
                        Task                       = $set.Task
                        TaskRunAsSelf              = $set.TaskRunAsSelf
                        TaskArguments              = $set.TaskArguments
                        TaskUserTextArguments      = $set.TaskUserTextArguments
                        Schedules                  = $set.Schedules
                        SchedulesEnabled           = $set.SchedulesEnabled
                        UserAccount                = $set.UserAccount
                        Xml                        = $set.Xml
                        Security                   = $set.Security
                        StopOnCompletion           = $set.StopOnCompletion
                        State                      = $state.Trim()
                        DataCollectorSetObject     = $true
                        TaskObject                 = $task
                        Credential                 = $args[1]
                    }
                } catch {
                    <# DO NOT use Write-Message as this is inside of a script block #>
                    Write-Warning -Message "Issue with getting Collector Set $setname on $env:Computername : $_."
                    continue
                }
            }
        }

        $columns = 'ComputerName', 'Name', 'DisplayName', 'Description', 'State', 'Duration', 'OutputLocation', 'LatestOutputLocation',
        'RootPath', 'SchedulesEnabled', 'Segment', 'SegmentMaxDuration', 'SegmentMaxSize',
        'SerialNumber', 'Server', 'StopOnCompletion', 'Subdirectory', 'SubdirectoryFormat',
        'SubdirectoryFormatPattern', 'Task', 'TaskArguments', 'TaskRunAsSelf', 'TaskUserTextArguments', 'UserAccount'
    }
    process {
        
        
        foreach ($computer in $ComputerName.ComputerName) {
            try {
                Invoke-Command2 -ComputerName $computer -Credential $Credential -ScriptBlock $setscript -ArgumentList $CollectorSet, $Credential -ErrorAction Stop | Select-DefaultView -Property $columns
            } catch {
                Stop-Function -Message "Failure" -ErrorRecord $_ -Target $computer -Continue
            }
        }
    }
}

tools\dbatools\functions\Get-DbaPfDataCollectorSetTemplate.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaPfDataCollectorSetTemplate {
    <#
    .SYNOPSIS
        Parses Perf Monitor templates. Defaults to parsing templates in the dbatools template repository (\bin\perfmontemplates\).

    .DESCRIPTION
        Parses Perf Monitor XML templates. Defaults to parsing templates in the dbatools template repository (\bin\perfmontemplates\).

    .PARAMETER Path
        The path to the template directory. Defaults to the dbatools template repository (\bin\perfmontemplates\).

    .PARAMETER Pattern
        Specify a pattern for filtering. Alternatively, you can use Out-GridView -Passthru to select objects and pipe them to Import-DbaPfDataCollectorSetTemplate.

    .PARAMETER Template
        Specifies one or more of the templates provided by dbatools. Press tab to cycle through the list to the options.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Performance, DataCollector, PerfCounter
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaPfDataCollectorSetTemplate

    .EXAMPLE
        PS C:\> Get-DbaPfDataCollectorSetTemplate

        Returns information about all the templates in the local dbatools repository.

    .EXAMPLE
        PS C:\> Get-DbaPfDataCollectorSetTemplate | Out-GridView -PassThru | Import-DbaPfDataCollectorSetTemplate -ComputerName sql2017 | Start-DbaPfDataCollectorSet

        Allows you to select a template, then deploys it to sql2017 and immediately starts the DataCollectorSet.

    .EXAMPLE
        PS C:\> Get-DbaPfDataCollectorSetTemplate | Select-Object *

        Returns more information about the template, including the full path/filename.

    #>
    [CmdletBinding()]
    param (
        [string[]]$Path = "$script:PSModuleRoot\bin\perfmontemplates\collectorsets",
        [string]$Pattern,
        [string[]]$Template,
        [switch]$EnableException
    )
    begin {
        $metadata = Import-Clixml "$script:PSModuleRoot\bin\perfmontemplates\collectorsets.xml"
        # In case people really want a "like" search, which is slower
        $Pattern = $Pattern.Replace("*", ".*").Replace("..*", ".*")
    }
    process {
        
        
        foreach ($directory in $Path) {
            $files = Get-ChildItem "$directory\*.xml"

            if ($Template) {
                $files = $files | Where-Object BaseName -in $Template
            }

            foreach ($file in $files) {
                try {
                    $xml = [xml](Get-Content $file)
                } catch {
                    Stop-Function -Message "Failure" -ErrorRecord $_ -Target $file -Continue
                }

                foreach ($dataset in $xml.DataCollectorSet) {
                    $meta = $metadata | Where-Object Name -eq $dataset.name
                    if ($Pattern) {
                        if (
                            ($dataset.Name -match $Pattern) -or
                            ($dataset.Description -match $Pattern)
                        ) {
                            [pscustomobject]@{
                                Name        = $dataset.name
                                Source      = $meta.Source
                                UserAccount = $dataset.useraccount
                                Description = $dataset.Description
                                Path        = $file
                                File        = $file.Name
                            } | Select-DefaultView -ExcludeProperty File, Path
                        }
                    } else {
                        [pscustomobject]@{
                            Name        = $dataset.name
                            Source      = $meta.Source
                            UserAccount = $dataset.useraccount
                            Description = $dataset.Description
                            Path        = $file
                            File        = $file.Name
                        } | Select-DefaultView -ExcludeProperty File, Path
                    }
                }
            }
        }
    }
}

tools\dbatools\functions\Get-DbaPlanCache.ps1

function Get-DbaPlanCache {
    <#
    .SYNOPSIS
        Provides information about adhoc and prepared plan cache usage

    .DESCRIPTION
        Checks adhoc and prepared plan cache for each database, if over 100 MB you should consider using Remove-DbaQueryPlan to clear the plan caches or turning on "optimize for adhoc workloads" configuration if running 2008 or later.

        References: https://www.sqlskills.com/blogs/kimberly/plan-cache-adhoc-workloads-and-clearing-the-single-use-plan-cache-bloat/

        Note: This command returns results from all SQL server instances on the destination server but the process column is specific to -SqlInstance passed.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Memory
        Author: Tracy Boggiano, databasesuperhero.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaPlanCache

    .EXAMPLE
        PS C:\> Get-DbaPlanCache -SqlInstance sql2017

        Returns the single use plan cache usage information for SQL Server instance 2017

    .EXAMPLE
        PS C:\> Get-DbaPlanCache -SqlInstance sql2017 -SqlCredential sqladmin

        Returns the single use plan cache usage information for SQL Server instance 2017 using login 'sqladmin'

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "SqlServers")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [switch]$EnableException
    )
    begin {
        $Sql = "SELECT SERVERPROPERTY('MachineName') AS ComputerName,
    ISNULL(SERVERPROPERTY('InstanceName'), 'MSSQLSERVER') AS InstanceName,
    SERVERPROPERTY('ServerName') AS SqlInstance, MB = SUM(CAST((CASE WHEN usecounts = 1 AND objtype IN ('Adhoc', 'Prepared') THEN size_in_bytes ELSE 0 END) AS DECIMAL(12, 2))) / 1024 / 1024,
    UseCount = SUM(CASE WHEN usecounts = 1 AND objtype IN ('Adhoc', 'Prepared') THEN 1 ELSE 0 END)
    FROM sys.dm_exec_cached_plans;"
    }

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $results = $server.Query($sql)
            $size = [dbasize]($results.MB * 1024 * 1024)
            Add-Member -Force -InputObject $results -MemberType NoteProperty -Name Size -Value $size

            Select-DefaultView -InputObject $results -Property ComputerName, InstanceName, SqlInstance, Size, UseCount
        }
    }
}

tools\dbatools\functions\Get-DbaDbMirror.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaDbMirror {
    <#
    .SYNOPSIS
        Gets properties of database mirrors and mirror witnesses.

    .DESCRIPTION
        Gets properties of database mirrors and mirror witnesses.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function
        to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Mirror, HA
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaDbMirror

    .EXAMPLE
        PS C:\> Get-DbaDbMirror -SqlInstance localhost

        Gets properties of database mirrors and mirror witnesses on localhost

    .EXAMPLE
        PS C:\> Get-DbaDbMirror -SqlInstance localhost, sql2016

        Gets properties of database mirrors and mirror witnesses on localhost and sql2016 SQL Server instances

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            $dbs = Get-DbaDatabase -SqlInstance $instance -SqlCredential $SqlCredential
            $partners = $dbs | Where-Object MirroringPartner
            $partners | Select-DefaultView -Property ComputerName, InstanceName, SqlInstance, Name, MirroringSafetyLevel, MirroringStatus, MirroringPartner, MirroringPartnerInstance, MirroringFailoverLogSequenceNumber, MirroringID, MirroringRedoQueueMaxSize, MirroringRoleSequence, MirroringSafetySequence, MirroringTimeout, MirroringWitness, MirroringWitnessStatus

            # The witness is kinda hidden. Go get it manually.
            try {
                $witnesses = $dbs[0].Parent.Query("select distinct database_name, principal_server_name, safety_level, safety_level_desc, partner_sync_state from master.sys.database_mirroring_witnesses")
            } catch { continue }

            foreach ($witness in $witnesses) {
                $witnessdb = $dbs | Where-Object Name -eq $witness.database_name
                $status = switch ($witness.partner_sync_state) {
                    0 { "None" }
                    1 { "Suspended" }
                    2 { "Disconnected" }
                    3 { "Synchronizing" }
                    4 { "PendingFailover" }
                    5 { "Synchronized" }
                }

                foreach ($db in $witnessdb) {
                    Add-Member -InputObject $db -Force -MemberType NoteProperty -Name MirroringPartner -Value $witness.principal_server_name
                    Add-Member -InputObject $db -Force -MemberType NoteProperty -Name MirroringSafetyLevel -Value $witness.safety_level_desc
                    Add-Member -InputObject $db -Force -MemberType NoteProperty -Name MirroringWitnessStatus -Value $status
                    Select-DefaultView -InputObject $db -Property ComputerName, InstanceName, SqlInstance, Name, MirroringSafetyLevel, MirroringStatus, MirroringPartner, MirroringPartnerInstance, MirroringFailoverLogSequenceNumber, MirroringID, MirroringRedoQueueMaxSize, MirroringRoleSequence, MirroringSafetySequence, MirroringTimeout, MirroringWitness, MirroringWitnessStatus
                }
            }
        }
    }
}

tools\dbatools\functions\Get-DbaDbRecoveryModel.ps1

function Get-DbaDbRecoveryModel {
    <#
    .SYNOPSIS
        Get-DbaDbRecoveryModel displays the Recovery Model.

    .DESCRIPTION
        Get-DbaDbRecoveryModel displays the Recovery Model for all databases. This is the default, you can filter using -Database, -ExcludeDatabase, -RecoveryModel

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The database(s) to process - this list is auto-populated from the server. if unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto-populated from the server

    .PARAMETER RecoveryModel
        Filters the output based on Recovery Model. Valid options are Simple, Full and BulkLogged

        Details about the recovery models can be found here:
        https://docs.microsoft.com/en-us/sql/relational-databases/backup-restore/recovery-models-sql-server

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Recovery, RecoveryModel, Simple, Full, Bulk, BulkLogged
        Author: Viorel Ciucu (@viorelciucu), https://www.cviorel.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaDbRecoveryModel

    .EXAMPLE
        PS C:\> Get-DbaDbRecoveryModel -SqlInstance sql2014 -RecoveryModel BulkLogged -Verbose

        Gets all databases on SQL Server instance sql2014 having RecoveryModel set to BulkLogged.

    .EXAMPLE
        PS C:\> Get-DbaDbRecoveryModel -SqlInstance sql2014 -Database TestDB

        Gets recovery model information for TestDB. If TestDB does not exist on the instance nothing is returned.

       #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstance[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [ValidateSet('Simple', 'Full', 'BulkLogged')]
        [string[]]$RecoveryModel,
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [switch]$EnableException
    )
    begin {
        $defaults = 'ComputerName', 'InstanceName', 'SqlInstance', 'Name', 'Status', 'IsAccessible', 'RecoveryModel',
        'LastBackupDate as LastFullBackup', 'LastDifferentialBackupDate as LastDiffBackup',
        'LastLogBackupDate as LastLogBackup'
    }
    process {
        $params = @{
            SqlInstance     = $SqlInstance
            SqlCredential   = $SqlCredential
            Database        = $Database
            ExcludeDatabase = $ExcludeDatabase
            EnableException = $EnableException
        }

        if ($RecoveryModel) {
            Get-DbaDatabase @params | Where-Object RecoveryModel -in $RecoveryModel | Where-Object IsAccessible | Select-DefaultView -Property $defaults
        } else {
            Get-DbaDatabase @params | Select-DefaultView -Property $defaults
        }
    }
}

tools\dbatools\functions\Get-DbaDbSharePoint.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaDbSharePoint {
    <#
    .SYNOPSIS
        Returns databases that are part of a SharePoint Farm.

    .DESCRIPTION
        Returns databases that are part of a SharePoint Farm, as found in the SharePoint Configuration database.

        By default, this command checks SharePoint_Config. To use an alternate database, use the ConfigDatabase parameter.

    .PARAMETER SqlInstance
        The target SQL Server instance

    .PARAMETER SqlCredential
        Login to the target instance using alternate Windows or SQL Login Authentication. Accepts credential objects (Get-Credential).

    .PARAMETER ConfigDatabase
        The name of the SharePoint Configuration database. Defaults to SharePoint_Config.

    .PARAMETER InputObject
        Allows piping from Get-DbaDatabase.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: SharePoint
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaDbSharePoint

    .EXAMPLE
        PS C:\> Get-DbaDbSharePoint -SqlInstance sqlcluster

        Returns databases that are part of a SharePoint Farm, as found in SharePoint_Config on sqlcluster

    .EXAMPLE
        PS C:\> Get-DbaDatabase -SqlInstance sqlcluster -Database SharePoint_Config_2016 | Get-DbaDbSharePoint

        Returns databases that are part of a SharePoint Farm, as found in SharePoint_Config_2016 on sqlcluster

    #>
    [CmdletBinding()]
    param (
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$ConfigDatabase = "SharePoint_Config",
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Database[]]$InputObject,
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            $InputObject += Get-DbaDatabase -SqlInstance $instance -SqlCredential $SqlCredential -Database $ConfigDatabase
        }

        foreach ($db in $InputObject) {
            try {
                $guid = $db.Query("SELECT Id FROM Classes WHERE FullName LIKE 'Microsoft.SharePoint.Administration.SPDatabase,%'").Id.Guid
                $dbid = $db.Query("[dbo].[proc_getObjectsByBaseClass] @BaseClassId = '$guid', @ParentId = NULL").Id.Guid -join "', '"
                $dbname = $db.Query("SELECT [Name] FROM [SharePoint_Config].[dbo].[Objects] WHERE id in ('$dbid')").Name
                Get-DbaDatabase -SqlInstance $db.Parent -Database $dbname
            } catch {
                Stop-Function -Message "Failure" -ErrorRecord $_
            }
        }
    }
}

tools\dbatools\functions\Get-DbaDbTrigger.ps1

function Get-DbaDbTrigger {
    <#
    .SYNOPSIS
        Get all existing database triggers on one or more SQL instances.

    .DESCRIPTION
        Get all existing database triggers on one or more SQL instances.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        SqlCredential object used to connect to the SQL Server as a different user.

    .PARAMETER Database
        The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto-populated from the server

    .PARAMETER InputObject
        Allow pipedline input from Get-DbaDatabase

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/ca

    .NOTES
        Tags: Database, Trigger
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaDbTrigger

    .EXAMPLE
        PS C:\> Get-DbaDbTrigger -SqlInstance sql2017

        Returns all database triggers

    .EXAMPLE
        PS C:\> Get-DbaDatabase -SqlInstance sql2017 -Database supa | Get-DbaDbTrigger

        Returns all triggers for database supa on sql2017

    .EXAMPLE
        PS C:\> Get-DbaDbTrigger -SqlInstance sql2017 -Database supa

        Returns all triggers for database supa on sql2017

    #>
    [CmdletBinding()]
    param (
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Database[]]$InputObject,
        [switch]$EnableException
    )

    process {
        foreach ($Instance in $SqlInstance) {
            $InputObject += Get-DbaDatabase -SqlInstance $SqlInstance -SqlCredential $SqlCredential -Database $Database -ExcludeDatabase $ExcludeDatabase
        }

        foreach ($db in $InputObject) {
            try {
                foreach ($trigger in ($db.Triggers)) {
                    Add-Member -Force -InputObject $trigger -MemberType NoteProperty -Name ComputerName -value $db.Parent.ComputerName
                    Add-Member -Force -InputObject $trigger -MemberType NoteProperty -Name InstanceName -value $db.Parent.ServiceName
                    Add-Member -Force -InputObject $trigger -MemberType NoteProperty -Name SqlInstance -value $db.Parent.DomainInstanceName
                    Select-DefaultView -InputObject $trigger -Property ComputerName, InstanceName, SqlInstance, Name, IsEnabled, DateLastModified
                }
            } catch {
                Stop-Function -Message "Failure" -ErrorRecord $_ -Continue
            }
        }
    }
}

tools\dbatools\functions\Get-DbaDbUdf.ps1

function Get-DbaDbUdf {
    <#
    .SYNOPSIS
        Gets database User Defined Functions

    .DESCRIPTION
        Gets database User Defined Functions

    .PARAMETER SqlInstance
        The target SQL Server instance or instances

    .PARAMETER SqlCredential
        Allows you to login to SQL Server using alternative credentials

    .PARAMETER Database
        To get User Defined Functions from specific database(s)

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto populated from the server

    .PARAMETER ExcludeSystemUdf
        This switch removes all system objects from the UDF collection

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Security, Database
        Author: Klaas Vandenberghe (@PowerDbaKlaas)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Get-DbaDbUdf -SqlInstance sql2016

        Gets all database User Defined Functions

    .EXAMPLE
        PS C:\> Get-DbaDbUdf -SqlInstance Server1 -Database db1

        Gets the User Defined Functions for the db1 database

    .EXAMPLE
        PS C:\> Get-DbaDbUdf -SqlInstance Server1 -ExcludeDatabase db1

        Gets the User Defined Functions for all databases except db1

    .EXAMPLE
        PS C:\> Get-DbaDbUdf -SqlInstance Server1 -ExcludeSystemUdf

        Gets the User Defined Functions for all databases that are not system objects (there can be 100+ system User Defined Functions in each DB)

    .EXAMPLE
        PS C:\> 'Sql1','Sql2/sqlexpress' | Get-DbaDbUdf

        Gets the User Defined Functions for the databases on Sql1 and Sql2/sqlexpress

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [switch]$ExcludeSystemUdf,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $databases = $server.Databases | Where-Object IsAccessible

            if ($Database) {
                $databases = $databases | Where-Object Name -In $Database
            }
            if ($ExcludeDatabase) {
                $databases = $databases | Where-Object Name -NotIn $ExcludeDatabase
            }

            foreach ($db in $databases) {

                $UserDefinedFunctions = $db.UserDefinedFunctions

                if (!$UserDefinedFunctions) {
                    Write-Message -Message "No User Defined Functions exist in the $db database on $instance" -Target $db -Level Verbose
                    continue
                }
                if (Test-Bound -ParameterName ExcludeSystemUdf) {
                    $UserDefinedFunctions = $UserDefinedFunctions | Where-Object { $_.IsSystemObject -eq $false }
                }

                $UserDefinedFunctions | ForEach-Object {

                    Add-Member -Force -InputObject $_ -MemberType NoteProperty -Name ComputerName -value $server.ComputerName
                    Add-Member -Force -InputObject $_ -MemberType NoteProperty -Name InstanceName -value $server.ServiceName
                    Add-Member -Force -InputObject $_ -MemberType NoteProperty -Name SqlInstance -value $server.DomainInstanceName
                    Add-Member -Force -InputObject $_ -MemberType NoteProperty -Name Database -value $db.Name

                    Select-DefaultView -InputObject $_ -Property ComputerName, InstanceName, SqlInstance, Database, Schema, CreateDate, DateLastModified, Name, DataType
                }
            }
        }
    }

    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Get-DbaDatabaseUdf
    }
}

tools\dbatools\functions\Get-DbaRegistryRoot.ps1

function Get-DbaRegistryRoot {
    <#
    .SYNOPSIS
        Uses SQL WMI to find the Registry Root of each SQL Server instance on a computer

    .DESCRIPTION
        Uses SQL WMI to find the Registry Root of each SQL Server instance on a computer

    .PARAMETER ComputerName
        The target computer. This is not a SQL Server service, though if you pass a named SQL instance, it'll parse properly down to the computer name

    .PARAMETER Credential
        Allows you to login to $ComputerName using alternative Windows credentials

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Configuration, Registry
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Get-DbaRegistryRoot

        Gets the registry root for all instances on localhost

    .EXAMPLE
        PS C:\> Get-DbaRegistryRoot -ComputerName server1

        Gets the registry root for all instances on server1

    #>
    [CmdletBinding()]
    param (
        [parameter(ValueFromPipeline)]
        [DbaInstanceParameter[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ($computer in $computername) {
            try {
                $sqlwmis = Invoke-ManagedComputerCommand -ComputerName $computer.ComputerName -ScriptBlock { $wmi.Services } -Credential $Credential -ErrorAction Stop | Where-Object DisplayName -match "SQL Server \("
            } catch {
                Stop-Function -Message $_ -Target $sqlwmi -Continue
            }

            foreach ($sqlwmi in $sqlwmis) {

                $regroot = ($sqlwmi.AdvancedProperties | Where-Object Name -eq REGROOT).Value
                $vsname = ($sqlwmi.AdvancedProperties | Where-Object Name -eq VSNAME).Value
                $instancename = $sqlwmi.DisplayName.Replace('SQL Server (', '').Replace(')', '') # Don't clown, I don't know regex :(

                if ([System.String]::IsNullOrEmpty($regroot)) {
                    $regroot = $sqlwmi.AdvancedProperties | Where-Object { $_ -match 'REGROOT' }
                    $vsname = $sqlwmi.AdvancedProperties | Where-Object { $_ -match 'VSNAME' }

                    if (![System.String]::IsNullOrEmpty($regroot)) {
                        $regroot = ($regroot -Split 'Value\=')[1]
                        $vsname = ($vsname -Split 'Value\=')[1]
                    } else {
                        Write-Message -Level Warning -Message "Can't find instance $vsname on $env:COMPUTERNAME"
                        return
                    }
                }

                # vsname takes care of clusters
                if ([System.String]::IsNullOrEmpty($vsname)) {
                    $vsname = $computer
                    if ($instancename -ne "MSSQLSERVER") {
                        $vsname = "$($computer.ComputerName)\$instancename"
                    }
                }

                Write-Message -Level Verbose -Message "Regroot: $regroot"
                Write-Message -Level Verbose -Message "InstanceName: $instancename"
                Write-Message -Level Verbose -Message "VSNAME: $vsname"

                [PSCustomObject]@{
                    ComputerName = $computer.ComputerName
                    InstanceName = $instancename
                    SqlInstance  = $vsname
                    Hive         = "HKLM"
                    Path         = $regroot
                    RegistryRoot = "HKLM:\$regroot"
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Get-DbaSqlRegistryRoot
    }
}

tools\dbatools\functions\Get-DbaDbUser.ps1

function Get-DbaDbUser {
    <#
    .SYNOPSIS
        Gets database users

    .DESCRIPTION
        Gets database users

    .PARAMETER SqlInstance
        The target SQL Server instance or instances

    .PARAMETER SqlCredential
        Allows you to login to SQL Server using alternative credentials

    .PARAMETER Database
        To get users from specific database(s)

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto populated from the server

    .PARAMETER ExcludeSystemUser
        This switch removes all system objects from the user collection

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Security, Database
        Author: Klaas Vandenberghe (@PowerDbaKlaas)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Get-DbaDbUser -SqlInstance sql2016

        Gets all database users

    .EXAMPLE
        PS C:\> Get-DbaDbUser -SqlInstance Server1 -Database db1

        Gets the users for the db1 database

    .EXAMPLE
        PS C:\> Get-DbaDbUser -SqlInstance Server1 -ExcludeDatabase db1

        Gets the users for all databases except db1

    .EXAMPLE
        PS C:\> Get-DbaDbUser -SqlInstance Server1 -ExcludeSystemUser

        Gets the users for all databases that are not system objects, like 'dbo', 'guest' or 'INFORMATION_SCHEMA'

    .EXAMPLE
        PS C:\> 'Sql1','Sql2/sqlexpress' | Get-DbaDbUser

        Gets the users for the databases on Sql1 and Sql2/sqlexpress

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [switch]$ExcludeSystemUser,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $databases = $server.Databases | Where-Object IsAccessible

            if ($Database) {
                $databases = $databases | Where-Object Name -In $Database
            }
            if ($ExcludeDatabase) {
                $databases = $databases | Where-Object Name -NotIn $ExcludeDatabase
            }

            foreach ($db in $databases) {

                $users = $db.users

                if (!$users) {
                    Write-Message -Message "No users exist in the $db database on $instance" -Target $db -Level Verbose
                    continue
                }
                if (Test-Bound -ParameterName ExcludeSystemUser) {
                    $users = $users | Where-Object { $_.IsSystemObject -eq $false }
                }

                $users | ForEach-Object {

                    Add-Member -Force -InputObject $_ -MemberType NoteProperty -Name ComputerName -value $server.ComputerName
                    Add-Member -Force -InputObject $_ -MemberType NoteProperty -Name InstanceName -value $server.ServiceName
                    Add-Member -Force -InputObject $_ -MemberType NoteProperty -Name SqlInstance -value $server.DomainInstanceName
                    Add-Member -Force -InputObject $_ -MemberType NoteProperty -Name Database -value $db.Name

                    Select-DefaultView -InputObject $_ -Property ComputerName, InstanceName, SqlInstance, Database, CreateDate, DateLastModified, Name, Login, LoginType, AuthenticationType, State, HasDbAccess, DefaultSchema
                }
            }
        }
    }

    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Get-DbaDatabaseUser
    }
}

tools\dbatools\functions\Get-DbaDbView.ps1

function Get-DbaDbView {
    <#
    .SYNOPSIS
        Gets database views for each SqlInstance.

    .DESCRIPTION
        Gets database views for each SqlInstance.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        To get views from specific database(s) - this list is auto populated from the server.

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto populated from the server.

    .PARAMETER ExcludeSystemView
        This switch removes all system objects from the view collection.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Security, Database
        Author: Klaas Vandenberghe (@PowerDbaKlaas)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Get-DbaDbView -SqlInstance sql2016

        Gets all database views

    .EXAMPLE
        PS C:\> Get-DbaDbView -SqlInstance Server1 -Database db1

        Gets the views for the db1 database

    .EXAMPLE
        PS C:\> Get-DbaDbView -SqlInstance Server1 -ExcludeDatabase db1

        Gets the views for all databases except db1

    .EXAMPLE
        PS C:\> Get-DbaDbView -SqlInstance Server1 -ExcludeSystemView

        Gets the views for all databases that are not system objects (there can be 400+ system views in each DB)

    .EXAMPLE
        PS C:\> 'Sql1','Sql2/sqlexpress' | Get-DbaDbView

        Gets the views for the databases on Sql1 and Sql2/sqlexpress

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [switch]$ExcludeSystemView,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $databases = $server.Databases | Where-Object IsAccessible

            if ($Database) {
                $databases = $databases | Where-Object Name -In $Database
            }
            if ($ExcludeDatabase) {
                $databases = $databases | Where-Object Name -NotIn $ExcludeDatabase
            }

            foreach ($db in $databases) {
                $views = $db.views

                if (!$views) {
                    Write-Message -Message "No views exist in the $db database on $instance" -Target $db -Level Verbose
                    continue
                }
                if (Test-Bound -ParameterName ExcludeSystemView) {
                    $views = $views | Where-Object { $_.IsSystemObject -eq $false }
                }

                $views | Foreach-Object {

                    Add-Member -Force -InputObject $_ -MemberType NoteProperty -Name ComputerName -value $server.ComputerName
                    Add-Member -Force -InputObject $_ -MemberType NoteProperty -Name InstanceName -value $server.ServiceName
                    Add-Member -Force -InputObject $_ -MemberType NoteProperty -Name SqlInstance -value $server.DomainInstanceName
                    Add-Member -Force -InputObject $_ -MemberType NoteProperty -Name Database -value $db.Name

                    Select-DefaultView -InputObject $_ -Property ComputerName, InstanceName, SqlInstance, Database, Schema, CreateDate, DateLastModified, Name
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Get-DbaDatabaseView
    }
}

tools\dbatools\functions\Get-DbaDbVirtualLogFile.ps1

#ValidationTags#CodeStyle,Messaging,FlowControl,Pipeline#
function Get-DbaDbVirtualLogFile {
    <#
    .SYNOPSIS
        Returns database virtual log file information for database files on a SQL instance.

    .DESCRIPTION
        Having a transaction log file with too many virtual log files (VLFs) can hurt database performance.

        Too many VLFs can cause transaction log backups to slow down and can also slow down database recovery and, in extreme cases, even affect insert/update/delete performance.

        References:
        http://www.sqlskills.com/blogs/kimberly/transaction-log-vlfs-too-many-or-too-few/
        http://blogs.msdn.com/b/saponsqlserver/archive/2012/02/22/too-many-virtual-log-files-vlfs-can-cause-slow-database-recovery.aspx

        If you've got a high number of VLFs, you can use Expand-SqlTLogResponsibly to reduce the number.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        Specifies the database(s) to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        Specifies the database(s) to exclude from processing. Options for this list are auto-populated from the server.

    .PARAMETER IncludeSystemDBs
        If this switch is enabled, system database information will be displayed.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: VLF, Database, LogFile
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaDbVirtualLogFile

    .EXAMPLE
        PS C:\> Get-DbaDbVirtualLogFile -SqlInstance sqlcluster

        Returns all user database virtual log file details for the sqlcluster instance.

    .EXAMPLE
        PS C:\> Get-DbaDbVirtualLogFile -SqlInstance sqlserver | Group-Object -Property Database | Where-Object Count -gt 50

        Returns user databases that have 50 or more VLFs.

    .EXAMPLE
        PS C:\> 'sqlserver','sqlcluster' | Get-DbaDbVirtualLogFile

        Returns all VLF information for the sqlserver and sqlcluster SQL Server instances. Processes data via the pipeline.

    .EXAMPLE
        PS C:\> Get-DbaDbVirtualLogFile -SqlInstance sqlcluster -Database db1, db2

        Returns the VLF counts for the db1 and db2 databases on sqlcluster.

    #>
    [CmdletBinding()]
    [OutputType([System.Collections.ArrayList])]
    param ([parameter(ValueFromPipeline, Mandatory)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [switch]$IncludeSystemDBs,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $dbs = $server.Databases | Where-Object IsAccessible

            if ($Database) {
                $dbs = $dbs | Where-Object Name -in $Database
            }
            if ($ExcludeDatabase) {
                $dbs = $dbs | Where-Object Name -NotIn $ExcludeDatabase
            }

            if (!$IncludeSystemDBs) {
                $dbs = $dbs | Where-Object IsSystemObject -eq $false
            }

            foreach ($db in $dbs) {
                try {
                    $data = $db.Query("DBCC LOGINFO")

                    foreach ($d in $data) {
                        [pscustomobject]@{
                            ComputerName   = $server.ComputerName
                            InstanceName   = $server.ServiceName
                            SqlInstance    = $server.DomainInstanceName
                            Database       = $db.Name
                            RecoveryUnitId = $d.RecoveryUnitId
                            FileId         = $d.FileId
                            FileSize       = $d.FileSize
                            StartOffset    = $d.StartOffset
                            FSeqNo         = $d.FSeqNo
                            Status         = $d.Status
                            Parity         = $d.Parity
                            CreateLsn      = $d.CreateLSN
                        }
                    }
                } catch {
                    Stop-Function -Message "Unable to query $($db.name) on $instance." -ErrorRecord $_ -Target $db -Continue
                }
            }
        }
    }
}

tools\dbatools\functions\Get-DbaDefaultPath.ps1

function Get-DbaDefaultPath {
    <#
    .SYNOPSIS
        Gets the default SQL Server paths for data, logs and backups

    .DESCRIPTION
        Gets the default SQL Server paths for data, logs and backups

    .PARAMETER SqlInstance
        TThe target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Allows you to login to servers using SQL Logins as opposed to Windows Auth/Integrated/Trusted.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Config
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaDefaultPath

    .EXAMPLE
        PS C:\> Get-DbaDefaultPath -SqlInstance sql01\sharepoint

        Returns the default file paths for sql01\sharepoint

    .EXAMPLE
        PS C:\> $servers = "sql2014","sql2016", "sqlcluster\sharepoint"
        PS C:\> $servers | Get-DbaDefaultPath

        Returns the default file paths for "sql2014","sql2016" and "sqlcluster\sharepoint"

    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "Instance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]
        $SqlCredential,
        [Alias('Silent')]
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -AzureUnsupported
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $dataPath = $server.DefaultFile
            if ($dataPath.Length -eq 0) {
                $dataPath = $server.Query("SELECT SERVERPROPERTY('InstanceDefaultdataPath') as Data").Data
            }

            if ($dataPath -eq [System.DBNull]::Value -or $dataPath.Length -eq 0) {
                $dataPath = Split-Path (Get-DbaDatabase -SqlInstance $server -Database model).FileGroups[0].Files[0].FileName
            }

            if ($dataPath.Length -eq 0) {
                $dataPath = $server.Information.MasterDbPath
            }

            $logPath = $server.DefaultLog

            if ($logPath.Length -eq 0) {
                $logPath = $server.Query("SELECT SERVERPROPERTY('InstanceDefaultLogPath') as Log").Log
            }

            if ($logPath -eq [System.DBNull]::Value -or $logPath.Length -eq 0) {
                $logPath = Split-Path (Get-DbaDatabase -SqlInstance $server -Database model).LogFiles.FileName
            }

            if ($logPath.Length -eq 0) {
                $logPath = $server.Information.MasterDbLogPath
            }

            $dataPath = $dataPath.Trim().TrimEnd("\")
            $logPath = $logPath.Trim().TrimEnd("\")

            [PSCustomObject]@{
                ComputerName = $server.ComputerName
                InstanceName = $server.ServiceName
                SqlInstance  = $server.DomainInstanceName
                Data         = $dataPath
                Log          = $logPath
                Backup       = $server.BackupDirectory
                ErrorLog     = $server.ErrorlogPath
            }
        }
    }
}

tools\dbatools\functions\Get-DbaDependency.ps1

function Get-DbaDependency {
    <#
    .SYNOPSIS
        Finds object dependencies and their relevant creation scripts.

    .DESCRIPTION
        This function recursively finds all objects that depends on the input.
        It will then retrieve rich information from them, including their creation scripts and the order in which it should be applied.

        By using the 'Parents' switch, the function will instead retrieve all items that the input depends on (including their creation scripts).

        For more details on dependency, see:
        https://technet.microsoft.com/en-us/library/ms345449(v=sql.105).aspx

    .PARAMETER InputObject
        The SMO object to parse

    .PARAMETER AllowSystemObjects
        Normally, system objects are ignored by this function as dependencies.
        This switch overrides that behavior.

    .PARAMETER Parents
        Causes the function to retrieve all objects that the input depends on, rather than retrieving everything that depends on the input.

    .PARAMETER IncludeSelf
        Includes the object whose dependencies are retrieves itself.
        Useful when exporting an entire logic structure in order to recreate it in another database.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER IncludeScript
        Setting this switch will cause the function to also retrieve the creation script of the dependency.

    .NOTES
        Tags: Database, Dependent, Dependency, Object
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaDependency

    .EXAMPLE
        PS C:\> $table = (Get-DbaDatabase -SqlInstance sql2012 -Database Northwind).tables | Where Name -eq Customers
        PS C:\> $table | Get-DbaDependency

        Returns everything that depends on the "Customers" table

    #>
    [CmdletBinding()]
    param (
        [Parameter(ValueFromPipeline)]
        $InputObject,

        [switch]
        $AllowSystemObjects,

        [switch]
        $Parents,

        [switch]
        $IncludeSelf,

        [switch]
        [Alias('Silent')]$EnableException
    )

    begin {
        #region Utility functions
        function Get-DependencyTree {
            [CmdletBinding()]
            param (
                $Object,

                $Server,

                [bool]
                $AllowSystemObjects,

                [bool]
                $EnumParents,

                [string]
                $FunctionName,

                [bool]
                $EnableException
            )

            $scripter = New-Object Microsoft.SqlServer.Management.Smo.Scripter
            $options = New-Object Microsoft.SqlServer.Management.Smo.ScriptingOptions
            $options.DriAll = $true
            $options.AllowSystemObjects = $AllowSystemObjects
            $options.WithDependencies = $true
            $scripter.Options = $options
            $scripter.Server = $Server

            $urnCollection = New-Object Microsoft.SqlServer.Management.Smo.UrnCollection

            Write-Message -EnableException $EnableException -Level 5 -Message "Adding $Object which is a $($Object.urn.Type)" -FunctionName $FunctionName
            $urnCollection.Add([Microsoft.SqlServer.Management.Sdk.Sfc.Urn]$Object.urn)

            #now we set up an event listnenr go get progress reports
            $progressReportEventHandler = [Microsoft.SqlServer.Management.Smo.ProgressReportEventHandler] {
                $name = $_.Current.GetAttribute('Name');
                Write-Message -EnableException $EnableException -Level 5 -Message "Analysed $name" -FunctionName $FunctionName
            }
            $scripter.add_DiscoveryProgress($progressReportEventHandler)

            return $scripter.DiscoverDependencies($urnCollection, $EnumParents)
        }

        function Read-DependencyTree {
            [CmdletBinding()]
            param (
                [System.Object]
                $InputObject,

                [int]
                $Tier,

                [System.Object]
                $Parent,

                [bool]
                $EnumParents
            )

            Add-Member -Force -InputObject $InputObject -Name Parent -Value $Parent -MemberType NoteProperty
            if ($EnumParents) { Add-Member -Force -InputObject $InputObject -Name Tier -Value ($Tier * -1) -MemberType NoteProperty -PassThru }
            else { Add-Member -Force -InputObject $InputObject -Name Tier -Value $Tier -MemberType NoteProperty -PassThru }

            if ($InputObject.HasChildNodes) { Read-DependencyTree -InputObject $InputObject.FirstChild -Tier ($Tier + 1) -Parent $InputObject -EnumParents $EnumParents }
            if ($InputObject.NextSibling) { Read-DependencyTree -InputObject $InputObject.NextSibling -Tier $Tier -Parent $Parent -EnumParents $EnumParents }
        }

        function Get-DependencyTreeNodeDetail {
            [CmdletBinding()]
            param (
                [Parameter(ValueFromPipeline)]
                $SmoObject,

                $Server,

                $OriginalResource,

                [bool]
                $AllowSystemObjects
            )

            begin {
                $scripter = New-Object Microsoft.SqlServer.Management.Smo.Scripter
                $options = New-Object Microsoft.SqlServer.Management.Smo.ScriptingOptions
                $options.DriAll = $true
                $options.AllowSystemObjects = $AllowSystemObjects
                $options.WithDependencies = $true
                $scripter.Options = $options
                $scripter.Server = $Server
            }

            process {
                foreach ($Item in $SmoObject) {
                    $richobject = $Server.GetSmoObject($Item.urn)
                    $parent = $Server.GetSmoObject($Item.Parent.Urn)

                    $NewObject = New-Object Sqlcollaborative.Dbatools.Database.Dependency
                    $NewObject.ComputerName = $server.ComputerName
                    $NewObject.ServiceName = $server.ServiceName
                    $NewObject.SqlInstance = $server.DomainInstanceName
                    $NewObject.Dependent = $richobject.Name
                    $NewObject.Type = $Item.Urn.Type
                    $NewObject.Owner = $richobject.Owner
                    $NewObject.IsSchemaBound = $Item.IsSchemaBound
                    $NewObject.Parent = $parent.Name
                    $NewObject.ParentType = $parent.Urn.Type
                    $NewObject.Tier = $Item.Tier
                    $NewObject.Object = $richobject
                    $NewObject.Urn = $richobject.Urn
                    $NewObject.OriginalResource = $OriginalResource

                    $SQLscript = $scripter.EnumScriptWithList($richobject)

                    # I can't remember how to remove these options and their syntax is breaking stuff
                    $SQLscript = $SQLscript -replace "SET ANSI_NULLS ON", ""
                    $SQLscript = $SQLscript -replace "SET QUOTED_IDENTIFIER ON", ""
                    $NewObject.Script = "$SQLscript `r`ngo"

                    $NewObject
                }
            }
        }

        function Select-DependencyPrecedence {
            [CmdletBinding()]
            param (
                [Parameter(ValueFromPipeline)]
                $Dependency
            )

            begin {
                $list = @()
            }
            process {
                foreach ($dep in $Dependency) {
                    # Killing the pipeline is generally a bad idea, but since we have to group and sort things, we have not really a choice
                    $list += $dep
                }
            }
            end {
                $list | Group-Object -Property Object | ForEach-Object { $_.Group | Sort-Object -Property Tier -Descending | Select-Object -First 1 } | Sort-Object Tier
            }
        }
        #endregion Utility functions
    }
    process {
        foreach ($Item in $InputObject) {
            Write-Message -EnableException $EnableException -Level Verbose -Message "Processing: $Item"
            if ($null -eq $Item.urn) {
                Stop-Function -Message "$Item is not a valid SMO object" -EnableException $EnableException -Category InvalidData -Continue -Target $Item
            }

            # Find the server object to pass on to the function
            $parent = $Item.parent

            do { $parent = $parent.parent }
            until (($parent.urn.type -eq "Server") -or (-not $parent))

            if (-not $parent) {
                Stop-Function -Message "Failed to find valid server object in input: $Item" -EnableException $EnableException -Category InvalidData -Continue -Target $Item
            }

            $server = $parent

            $tree = Get-DependencyTree -Object $Item -AllowSystemObjects $false -Server $server -FunctionName (Get-PSCallStack)[0].COmmand -EnableException $EnableException -EnumParents $Parents
            $limitCount = 2
            if ($IncludeSelf) { $limitCount = 1 }
            if ($tree.Count -lt $limitCount) {
                Write-Message -Message "No dependencies detected for $($Item)" -Level Host
                continue
            }

            if ($IncludeSelf) { $resolved = Read-DependencyTree -InputObject $tree.FirstChild -Tier 0 -Parent $tree.FirstChild -EnumParents $Parents }
            else { $resolved = Read-DependencyTree -InputObject $tree.FirstChild.FirstChild -Tier 1 -Parent $tree.FirstChild -EnumParents $Parents }
            $resolved | Get-DependencyTreeNodeDetail -Server $server -OriginalResource $Item -AllowSystemObjects $AllowSystemObjects | Select-DependencyPrecedence
        }
    }
}

tools\dbatools\functions\Get-DbaRgResourcePool.ps1

function Get-DbaRgResourcePool {
    <#
    .SYNOPSIS
        Gets Resource Governor Pool objects, including internal or external

    .DESCRIPTION
        Gets Resource Governor Pool objects, including internal or external

    .PARAMETER SqlInstance
        The target SQL Server instance or instances

    .PARAMETER SqlCredential
        Allows you to login to SQL Server using alternative credentials

    .PARAMETER InputObject
        Allows input to be piped from Get-DbaResourceGovernor

    .PARAMETER Type
        Internal or External

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: ResourceGovernor
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaRgResourcePool

    .EXAMPLE
        PS C:\> Get-DbaRgResourcePool -SqlInstance sql2016

        Gets the internal resource pools on sql2016

    .EXAMPLE
        PS C:\> 'Sql1','Sql2/sqlexpress' | Get-DbaResourceGovernor | Get-DbaRgResourcePool

        Gets the internal resource pools on Sql1 and Sql2/sqlexpress instances

    .EXAMPLE
        PS C:\> 'Sql1','Sql2/sqlexpress' | Get-DbaResourceGovernor | Get-DbaRgResourcePool -Type External

        Gets the external resource pools on Sql1 and Sql2/sqlexpress instances


    #>
    [CmdletBinding()]
    param (
        [Parameter(ValueFromPipeline)]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [ValidateSet("Internal", "External")]
        [string]$Type = "Internal",
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.ResourceGovernor[]]$InputObject,
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            $InputObject += Get-DbaResourceGovernor -SqlInstance $SqlInstance -SqlCredential $SqlCredential
        }

        foreach ($resourcegov in $InputObject) {
            if ($Type -eq "External") {
                $respool = $resourcegov.ExternalResourcePools
                if ($respool) {
                    $respool | Add-Member -Force -MemberType NoteProperty -Name ComputerName -value $resourcegov.ComputerName
                    $respool | Add-Member -Force -MemberType NoteProperty -Name InstanceName -value $resourcegov.InstanceName
                    $respool | Add-Member -Force -MemberType NoteProperty -Name SqlInstance -value $resourcegov.SqlInstance
                    $respool | Select-DefaultView -Property ComputerName, InstanceName, SqlInstance, Id, Name, CapCpuPercentage, IsSystemObject, MaximumCpuPercentage, MaximumIopsPerVolume, MaximumMemoryPercentage, MinimumCpuPercentage, MinimumIopsPerVolume, MinimumMemoryPercentage, WorkloadGroups
                }
            } else {
                $respool = $resourcegov.ResourcePools
                if ($respool) {
                    $respool | Add-Member -Force -MemberType NoteProperty -Name ComputerName -value $resourcegov.ComputerName
                    $respool | Add-Member -Force -MemberType NoteProperty -Name InstanceName -value $resourcegov.InstanceName
                    $respool | Add-Member -Force -MemberType NoteProperty -Name SqlInstance -value $resourcegov.SqlInstance
                    $respool | Select-DefaultView -Property ComputerName, InstanceName, SqlInstance, Id, Name, CapCpuPercentage, IsSystemObject, MaximumCpuPercentage, MaximumIopsPerVolume, MaximumMemoryPercentage, MinimumCpuPercentage, MinimumIopsPerVolume, MinimumMemoryPercentage, WorkloadGroups
                }
            }
        }
    }
}

tools\dbatools\functions\Get-DbaDump.ps1

function Get-DbaDump {
    <#
    .SYNOPSIS
        Locate a SQL Server that has generated any memory dump files.

    .DESCRIPTION
        The type of dump included in the search include minidump, all-thread dump, or a full dump.  The files have an extendion of .mdmp.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Engine, Corruption
        Author: Garry Bargsley (@gbargsley), http://blog.garrybargsley.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaDump

    .EXAMPLE
        PS C:\> Get-DbaDump -SqlInstance sql2016

        Shows the detailed information for memory dump(s) located on sql2016 instance

    .EXAMPLE
        PS C:\> Get-DbaDump -SqlInstance sql2016 -SqlCredential sqladmin

        Shows the detailed information for memory dump(s) located on sql2016 instance. Logs into the SQL Server using the SQL login 'sqladmin'

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [switch]$EnableException
    )
    begin {
        $sql = "SELECT filename,  creation_time,  size_in_bytes FROM sys.dm_server_memory_dumps"
    }

    process {
        foreach ($instance in $SqlInstance) {
            $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential

            if ($server.versionMajor -lt 11 -and (-not ($server.versionMajor -eq 10 -and $server.versionMinor -eq 50))) {
                Stop-Function -Message "This function does not support versions lower than SQL Server 2008 R2 (v10.50). Skipping server '$instance'" -Continue
            }

            try {
                foreach ($result in $server.Query($sql)) {
                    [PSCustomObject]@{
                        ComputerName = $server.ComputerName
                        InstanceName = $server.ServiceName
                        SqlInstance  = $server.DomainInstanceName
                        FileName     = $result.filename
                        CreationTime = $result.creation_time
                        Size         = [dbasize]$result.size_in_bytes
                    }
                }
            } catch {
                Stop-Function -Message "Issue collecting data on $server" -Target $server -ErrorRecord $_ -Continue
            }
        }
    }
}

tools\dbatools\functions\Get-DbaErrorLogConfig.ps1

function Get-DbaErrorLogConfig {
    <#
    .SYNOPSIS
        Pulls the configuration for the ErrorLog on a given SQL Server instance

    .DESCRIPTION
        Pulls the configuration for the ErrorLog on a given SQL Server instance.

        Includes error log path, number of log files configured and size (SQL Server 2012+ only)

    .PARAMETER SqlInstance
        The target SQL Server instance or instances

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Instance, ErrorLog
        Author: Shawn Melton (@wsmelton), https://wsmelton.github.io

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaErrorLogConfig

    .EXAMPLE
        PS C:\> Get-DbaErrorLogConfig -SqlInstance server2017,server2014

        Returns error log configuration for server2017 and server2014

    #>
    [cmdletbinding()]
    param (
        [Parameter(ValueFromPipeline, Mandatory)]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $numLogs = $server.NumberOfLogFiles
            $logSize =
            if ($server.VersionMajor -ge 11) {
                [dbasize]($server.ErrorLogSizeKb * 1024)
            } else {
                $null
            }

            [PSCustomObject]@{
                ComputerName = $server.ComputerName
                InstanceName = $server.ServiceName
                SqlInstance  = $server.DomainInstanceName
                LogCount     = $numLogs
                LogSize      = $logSize
                LogPath      = $server.ErrorLogPath
            }
        }
    }
}

tools\dbatools\functions\Get-DbaEstimatedCompletionTime.ps1

function Get-DbaEstimatedCompletionTime {
    <#
    .SYNOPSIS
        Gets execution and estimated completion time information for queries

    .DESCRIPTION
        Gets execution and estimated completion time information for queries

        Percent complete will show for the following commands

        ALTER INDEX REORGANIZE
        AUTO_SHRINK option with ALTER DATABASE
        BACKUP DATABASE
        DBCC CHECKDB
        DBCC CHECKFILEGROUP
        DBCC CHECKTABLE
        DBCC INDEXDEFRAG
        DBCC SHRINKDATABASE
        DBCC SHRINKFILE
        RECOVERY
        RESTORE DATABASE
        ROLLBACK
        TDE ENCRYPTION

        For additional information, check out https://blogs.sentryone.com/loriedwards/patience-dm-exec-requests/ and https://docs.microsoft.com/en-us/sql/relational-databases/system-dynamic-management-views/sys-dm-exec-requests-transact-sql

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        SqlCredential object used to connect to the SQL Server as a different user.

    .PARAMETER Database
        The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto-populated from the server

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Database
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaEstimatedCompletionTime

    .EXAMPLE
        PS C:\> Get-DbaEstimatedCompletionTime -SqlInstance sql2016

        Gets estimated completion times for queries performed against the entire server

    .EXAMPLE
        PS C:\> Get-DbaEstimatedCompletionTime -SqlInstance sql2016 | Select *

        Gets estimated completion times for queries performed against the entire server PLUS the SQL query text of each command

    .EXAMPLE
        PS C:\> Get-DbaEstimatedCompletionTime -SqlInstance sql2016 | Where-Object { $_.Text -match 'somequerytext' }

        Gets results for commands whose queries only match specific text (match is like LIKE but way more powerful)

    .EXAMPLE
        PS C:\> Get-DbaEstimatedCompletionTime -SqlInstance sql2016 -Database Northwind,pubs,Adventureworks2014

        Gets estimated completion times for queries performed against the Northwind, pubs, and Adventureworks2014 databases

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        $sql = "SELECT
                DB_NAME(r.database_id) as [Database],
                USER_NAME(r.user_id) as [Login],
                Command,
                start_time as StartTime,
                percent_complete as PercentComplete,

                  RIGHT('00000' + CAST(((DATEDIFF(s,start_time,GetDate()))/3600) as varchar),
                                CASE
                                    WHEN LEN(((DATEDIFF(s,start_time,GetDate()))/3600)) < 2 THEN 2
                                    ELSE LEN(((DATEDIFF(s,start_time,GetDate()))/3600))
                                 END)  + ':'
                + RIGHT('00' + CAST((DATEDIFF(s,start_time,GetDate())%3600)/60 as varchar), 2) + ':'
                + RIGHT('00' + CAST((DATEDIFF(s,start_time,GetDate())%60) as varchar), 2) as RunningTime,

                  RIGHT('00000' + CAST((estimated_completion_time/3600000) as varchar),
                        CASE
                                    WHEN LEN((estimated_completion_time/3600000)) < 2 THEN 2
                                    ELSE LEN((estimated_completion_time/3600000))
                         END)  + ':'
                + RIGHT('00' + CAST((estimated_completion_time %3600000)/60000 as varchar), 2) + ':'
                + RIGHT('00' + CAST((estimated_completion_time %60000)/1000 as varchar), 2) as EstimatedTimeToGo,
                dateadd(second,estimated_completion_time/1000, getdate()) as EstimatedCompletionTime,
                s.Text
             FROM sys.dm_exec_requests r
            CROSS APPLY sys.dm_exec_sql_text(r.sql_handle) s"
    }

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential

            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            if ($Database) {
                $includedatabases = $Database -join "','"
                $sql = "$sql WHERE DB_NAME(r.database_id) in ('$includedatabases')"
            }

            if ($ExcludeDatabase) {
                $excludedatabases = $ExcludeDatabase -join "','"
                $sql = "$sql WHERE DB_NAME(r.database_id) not in ('$excludedatabases')"
            }

            Write-Message -Level Debug -Message $sql
            foreach ($row in ($server.Query($sql))) {
                [pscustomobject]@{
                    ComputerName            = $server.ComputerName
                    InstanceName            = $server.ServiceName
                    SqlInstance             = $server.DomainInstanceName
                    Database                = $row.Database
                    Login                   = $row.Login
                    Command                 = $row.Command
                    PercentComplete         = $row.PercentComplete
                    StartTime               = $row.StartTime
                    RunningTime             = $row.RunningTime
                    EstimatedTimeToGo       = $row.EstimatedTimeToGo
                    EstimatedCompletionTime = $row.EstimatedCompletionTime
                    Text                    = $row.Text
                } | Select-DefaultView -ExcludeProperty Text
            }
        }
    }
}

tools\dbatools\functions\Get-DbaServerAudit.ps1

function Get-DbaServerAudit {
    <#
    .SYNOPSIS
        Gets SQL Security Audit information for each instance(s) of SQL Server.

    .DESCRIPTION
        The Get-DbaServerAudit command gets SQL Security Audit information for each instance(s) of SQL Server.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function
        to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Audit
        Return only specific audits

    .PARAMETER ExcludeAudit
        Exclude specific audits

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Audit, Security, SqlAudit
        Author: Garry Bargsley (@gbargsley), http://blog.garrybargsley.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaServerAudit

    .EXAMPLE
        PS C:\> Get-DbaServerAudit -SqlInstance localhost

        Returns all Security Audits on the local default SQL Server instance

    .EXAMPLE
        PS C:\> Get-DbaServerAudit -SqlInstance localhost, sql2016

        Returns all Security Audits for the local and sql2016 SQL Server instances

    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [string[]]$Audit,
        [string[]]$ExcludeAudit,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 10
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $audits = $server.Audits

            if (Test-Bound -ParameterName Audit) {
                $audits = $audits | Where-Object Name -in $Audit
            }
            if (Test-Bound -ParameterName ExcludeAudit) {
                $audits = $audits | Where-Object Name -notin $ExcludeAudit
            }

            foreach ($currentaudit in $audits) {
                $directory = $currentaudit.FilePath.TrimEnd("\")
                $filename = $currentaudit.FileName
                $fullname = "$directory\$filename"
                $remote = $fullname.Replace(":", "$")
                $remote = "\\$($currentaudit.Parent.ComputerName)\$remote"

                Add-Member -Force -InputObject $currentaudit -MemberType NoteProperty -Name ComputerName -value $currentaudit.Parent.ComputerName
                Add-Member -Force -InputObject $currentaudit -MemberType NoteProperty -Name InstanceName -value $currentaudit.Parent.ServiceName
                Add-Member -Force -InputObject $currentaudit -MemberType NoteProperty -Name SqlInstance -value $currentaudit.Parent.DomainInstanceName
                Add-Member -Force -InputObject $currentaudit -MemberType NoteProperty -Name FullName -value $fullname
                Add-Member -Force -InputObject $currentaudit -MemberType NoteProperty -Name RemoteFullName -value $remote

                Select-DefaultView -InputObject $currentaudit -Property ComputerName, InstanceName, SqlInstance, Name, 'Enabled as IsEnabled', FullName
            }
        }
    }
}

tools\dbatools\functions\Get-DbaOpenTransaction.ps1

function Get-DbaOpenTransaction {
    <#
    .SYNOPSIS
        Displays all open transactions.

    .DESCRIPTION
        This command is based on open transaction script published by Paul Randal.
        Reference: https://www.sqlskills.com/blogs/paul/script-open-transactions-with-text-and-plans/

    .PARAMETER SqlInstance
        The SQL Server instance

    .PARAMETER SqlCredential
        Connect using alternative credentials

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Database, Process, Session, ActivityMonitor
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaOpenTransaction

    .EXAMPLE
        PS C:\> Get-DbaOpenTransaction -SqlInstance sqlserver2014a

        Returns open transactions for sqlserver2014a

    .EXAMPLE
        PS C:\> Get-DbaOpenTransaction -SqlInstance sqlserver2014a -SqlCredential sqladmin

        Logs into sqlserver2014a using the login "sqladmin"

    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "SqlServers")]
        [DbaInstance[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [switch]$EnableException
    )

    begin {
        $sql = "
            SELECT  SERVERPROPERTY('MachineName') AS ComputerName,
            ISNULL(SERVERPROPERTY('InstanceName'), 'MSSQLSERVER') AS InstanceName,
            SERVERPROPERTY('ServerName') AS SqlInstance,
            [s_tst].[session_id] as Spid,
            [s_es].[login_name] as Login,
            DB_NAME (s_tdt.database_id) AS [Database],
            [s_tdt].[database_transaction_begin_time] AS [BeginTime],
            [s_tdt].[database_transaction_log_bytes_used] AS [LogBytesUsed],
            [s_tdt].[database_transaction_log_bytes_reserved] AS [LogBytesReserved],
            [s_est].text AS [LastQuery],
            [s_eqp].[query_plan] AS [LastPlan]
            FROM
                sys.dm_tran_database_transactions [s_tdt]
            JOIN
                sys.dm_tran_session_transactions [s_tst]
            ON
                [s_tst].[transaction_id] = [s_tdt].[transaction_id]
            JOIN
                sys.[dm_exec_sessions] [s_es]
            ON
                [s_es].[session_id] = [s_tst].[session_id]
            JOIN
                sys.dm_exec_connections [s_ec]
            ON
                [s_ec].[session_id] = [s_tst].[session_id]
            LEFT OUTER JOIN
                sys.dm_exec_requests [s_er]
            ON
                [s_er].[session_id] = [s_tst].[session_id]
            CROSS APPLY
                sys.dm_exec_sql_text ([s_ec].[most_recent_sql_handle]) AS [s_est]
            OUTER APPLY
                sys.dm_exec_query_plan ([s_er].[plan_handle]) AS [s_eqp]
            ORDER BY
                [BeginTime] ASC"
    }
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $server.Query($sql)
        }
    }
}

tools\dbatools\functions\Get-DbaOperatingSystem.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaOperatingSystem {
    <#
    .SYNOPSIS
        Gets operating system information from the server.

    .DESCRIPTION
        Gets operating system information from the server and returns as an object.

    .PARAMETER ComputerName
        Target computer(s). If no computer name is specified, the local computer is targeted

    .PARAMETER Credential
        Alternate credential object to use for accessing the target computer(s).

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: ServerInfo, OperatingSystem
        Author: Shawn Melton (@wsmelton), https://wsmelton.github.io

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaOperatingSystem

    .EXAMPLE
        PS C:\> Get-DbaOperatingSystem

        Returns information about the local computer's operating system

    .EXAMPLE
        PS C:\> Get-DbaOperatingSystem -ComputerName sql2016

        Returns information about the sql2016's operating system

    .EXAMPLE
        PS C:\> $wincred = Get-Credential ad\sqladmin
        PS C:\> 'sql2016', 'sql2017' | Get-DbaOperatingSystem -Credential $wincred

        Returns information about the sql2016 and sql2017 operating systems using alternative Windows credentials

    .EXAMPLE
        PS C:\> Get-Content .\servers.txt | Get-DbaOperatingSystem

        Returns information about all the servers operating system that are stored in the file. Every line in the file can only contain one hostname for a server.
    #>
    [CmdletBinding()]
    param (
        [Parameter(ValueFromPipeline)]
        [Alias("cn", "host", "Server")]
        [DbaInstanceParameter[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [Alias('Silent')]
        [switch]$EnableException
    )
    process {
        foreach ($computer in $ComputerName) {
            Write-Message -Level Verbose -Message "Connecting to $computer"

            $server = Resolve-DbaNetworkName -ComputerName $computer.ComputerName -Credential $Credential

            $computerResolved = $server.FullComputerName
            Write-Message -Level Verbose -Message "Resolved $computerResolved"

            if (!$computerResolved) {
                Write-Message -Level Warning -Message "Unable to resolve hostname of $computer. Skipping."
                continue
            }

            try {
                $TestWS = Test-WSMan -ComputerName $computerResolved -ErrorAction SilentlyContinue
            } catch {
                Write-Message -Level Warning -Message "Remoting not availablle on $computer. Skipping checks"
                $TestWS = $null
            }

            $splatDbaCmObject = @{
                ComputerName    = $computerResolved
                EnableException = $true
            }
            if (Test-Bound "Credential") {
                $splatDbaCmObject["Credential"] = $Credential
            }
            if ($TestWS) {
                try {
                    $psVersion = Invoke-Command2 -ComputerName $computerResolved -Credential $Credential -ScriptBlock { $PSVersionTable.PSVersion }
                    $PowerShellVersion = "$($psVersion.Major).$($psVersion.Minor)"
                } catch {
                    Write-Message -Level Warning -Message "PowerShell Version information not available on $computer."
                    $PowerShellVersion = 'Unavailable'
                }
            } else {
                $PowerShellVersion = 'Unknown'
            }

            try {
                $os = Get-DbaCmObject @splatDbaCmObject -ClassName Win32_OperatingSystem
            } catch {
                Stop-Function -Message "Failure collecting OS information on $computer" -Target $computer -ErrorRecord $_
                return
            }

            try {
                $tz = Get-DbaCmObject @splatDbaCmObject -ClassName Win32_TimeZone
            } catch {
                Stop-Function -Message "Failure collecting TimeZone information on $computer" -Target $computer -ErrorRecord $_
                return
            }

            try {
                $powerPlan = Get-DbaCmObject @splatDbaCmObject -ClassName Win32_PowerPlan -Namespace "root\cimv2\power"  | Select-Object ElementName, InstanceId, IsActive
            } catch {
                Write-Message -Level Warning -Message "Power plan information not available on $computer."
                $powerPlan = $null
            }

            if ($powerPlan) {
                $activePowerPlan = ($powerPlan | Where-Object IsActive).ElementName -join ','
            } else {
                $activePowerPlan = 'Not Avaliable'
            }

            $language = Get-Language $os.OSLanguage

            try {
                $ss = Get-DbaCmObject @splatDbaCmObject -Class Win32_SystemServices
                if ($ss | Select-Object PartComponent | Where-Object {$_ -like "*ClusSvc*"}) {
                    $IsWsfc = $true
                } else {
                    $IsWsfc = $false
                }
            } catch {
                Write-Message -Level Warning -Message "Unable to determine Cluster State of $computer."
                $IsWsfc = $null
            }

            [PSCustomObject]@{
                ComputerName             = $computerResolved
                Manufacturer             = $os.Manufacturer
                Organization             = $os.Organization
                Architecture             = $os.OSArchitecture
                Version                  = $os.Version
                Build                    = $os.BuildNumber
                OSVersion                = $os.caption;
                SPVersion                = $os.servicepackmajorversion;
                InstallDate              = [DbaDateTime]$os.InstallDate
                LastBootTime             = [DbaDateTime]$os.LastBootUpTime
                LocalDateTime            = [DbaDateTime]$os.LocalDateTime
                PowerShellVersion        = $PowerShellVersion
                TimeZone                 = $tz.Caption
                TimeZoneStandard         = $tz.StandardName
                TimeZoneDaylight         = $tz.DaylightName
                BootDevice               = $os.BootDevice
                SystemDevice             = $os.SystemDevice
                SystemDrive              = $os.SystemDrive
                WindowsDirectory         = $os.WindowsDirectory
                PagingFileSize           = $os.SizeStoredInPagingFiles
                TotalVisibleMemory       = [DbaSize]($os.TotalVisibleMemorySize * 1024)
                FreePhysicalMemory       = [DbaSize]($os.FreePhysicalMemory * 1024)
                TotalVirtualMemory       = [DbaSize]($os.TotalVirtualMemorySize * 1024)
                FreeVirtualMemory        = [DbaSize]($os.FreeVirtualMemory * 1024)
                ActivePowerPlan          = $activePowerPlan
                Status                   = $os.Status
                Language                 = $language.Name
                LanguageId               = $language.LCID
                LanguageKeyboardLayoutId = $language.KeyboardLayoutId
                LanguageTwoLetter        = $language.TwoLetterISOLanguageName
                LanguageThreeLetter      = $language.ThreeLetterISOLanguageName
                LanguageAlias            = $language.DisplayName
                LanguageNative           = $language.NativeName
                CodeSet                  = $os.CodeSet
                CountryCode              = $os.CountryCode
                Locale                   = $os.Locale
                IsWsfc                   = $IsWsfc
            } | Select-DefaultView -Property ComputerName, Manufacturer, Organization, Architecture, Version, Caption, LastBootTime, LocalDateTime, PowerShellVersion, TimeZone, TotalVisibleMemory, ActivePowerPlan, LanguageNative
        }
    }
}

tools\dbatools\functions\Get-DbaServerProtocol.ps1

function Get-DbaServerProtocol {
    <#
    .SYNOPSIS
        Gets the SQL Server related server protocols on a computer.

    .DESCRIPTION
        Gets the SQL Server related server protocols on one or more computers.

        Requires Local Admin rights on destination computer(s).
        The server protocols can be enabled and disabled when retrieved via WSMan.

    .PARAMETER ComputerName
        The target SQL Server instance or instances.

    .PARAMETER Credential
        Credential object used to connect to the computer as a different user.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Protocol
        Author: Klaas Vandenberghe ( @PowerDBAKlaas )

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaServerProtocol

    .EXAMPLE
        PS C:\> Get-DbaServerProtocol -ComputerName sqlserver2014a

        Gets the SQL Server related server protocols on computer sqlserver2014a.

    .EXAMPLE
        PS C:\> 'sql1','sql2','sql3' | Get-DbaServerProtocol

        Gets the SQL Server related server protocols on computers sql1, sql2 and sql3.

    .EXAMPLE
        PS C:\> Get-DbaServerProtocol -ComputerName sql1,sql2 | Out-GridView

        Gets the SQL Server related server protocols on computers sql1 and sql2, and shows them in a grid view.

    .EXAMPLE
        PS C:\> (Get-DbaServerProtocol -ComputerName sql1 | Where { $_.DisplayName = 'via' }).Disable()

        Disables the VIA ServerNetworkProtocol on computer sql1.
        If successful, return code 0 is shown.

    #>
    [CmdletBinding()]
    param (
        [parameter(ValueFromPipeline)]
        [Alias("cn", "host", "Server")]
        [DbaInstanceParameter[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ($Computer in $ComputerName.ComputerName) {
            $Server = Resolve-DbaNetworkName -ComputerName $Computer -Credential $credential
            if ($Server.FullComputerName) {
                $Computer = $server.FullComputerName
                Write-Message -Level Verbose -Message "Getting SQL Server namespace on $computer"
                $namespace = Get-DbaCmObject -ComputerName $Computer -NameSpace root\Microsoft\SQLServer -Query "Select * FROM __NAMESPACE WHERE Name Like 'ComputerManagement%'" -ErrorAction SilentlyContinue |
                    Where-Object { (Get-DbaCmObject -ComputerName $Computer -Namespace $("root\Microsoft\SQLServer\" + $_.Name) -ClassName ServerNetworkProtocol -ErrorAction SilentlyContinue).count -gt 0 } |
                    Sort-Object Name -Descending | Select-Object -First 1
                if ($namespace.Name) {
                    Write-Message -Level Verbose -Message "Getting Cim class ServerNetworkProtocol in Namespace $($namespace.Name) on $Computer"
                    try {
                        $prot = Get-DbaCmObject -ComputerName $Computer -Namespace $("root\Microsoft\SQLServer\" + $namespace.Name) -ClassName ServerNetworkProtocol -ErrorAction SilentlyContinue
                        $prot | Add-Member -Force -MemberType ScriptMethod -Name Enable -Value { Invoke-CimMethod -MethodName SetEnable -InputObject $this }
                        $prot | Add-Member -Force -MemberType ScriptMethod -Name Disable -Value { Invoke-CimMethod -MethodName SetDisable -InputObject $this }
                        foreach ($protocol in $prot) { Select-DefaultView -InputObject $protocol -Property 'PSComputerName as ComputerName', 'InstanceName', 'ProtocolDisplayName as DisplayName', 'ProtocolName as Name', 'MultiIpconfigurationSupport as MultiIP', 'Enabled as IsEnabled' }
                    } catch {
                        Write-Message -Level Warning -Message "No Sql ServerNetworkProtocol found on $Computer"
                    }
                } else {
                    Write-Message -Level Warning -Message "No ComputerManagement Namespace on $Computer. Please note that this function is available from SQL 2005 up."
                }
            } else {
                Write-Message -Level Warning -Message "Failed to connect to $Computer"
            }
        }
    }
}

tools\dbatools\functions\Get-DbaOrphanUser.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaOrphanUser {
    <#
    .SYNOPSIS
        Get orphaned users.

    .DESCRIPTION
        An orphan user is defined by a user that does not have their matching login. (Login property = "").

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        Specifies the database(s) to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        Specifies the database(s) to exclude from processing. Options for this list are auto-populated from the server

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Orphan, Database, User, Security, Login
        Author: Claudio Silva (@ClaudioESSilva) | Garry Bargsley (@gbargsley) | Simone Bizzotto (@niphlod)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaOrphanUser

    .EXAMPLE
        PS C:\> Get-DbaOrphanUser -SqlInstance localhost\sql2016

        Finds all orphan users without matching Logins in all databases present on server 'localhost\sql2016'.

    .EXAMPLE
        PS C:\> Get-DbaOrphanUser -SqlInstance localhost\sql2016 -SqlCredential $cred

        Finds all orphan users without matching Logins in all databases present on server 'localhost\sql2016'. SQL Server authentication will be used in connecting to the server.

    .EXAMPLE
        PS C:\> Get-DbaOrphanUser -SqlInstance localhost\sql2016 -Database db1

        Finds orphan users without matching Logins in the db1 database present on server 'localhost\sql2016'.

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [Alias('Silent')]
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Write-Message -Level Warning -Message "Failed to connect to: $instance."
                continue
            }
            $DatabaseCollection = $server.Databases | Where-Object IsAccessible

            if ($Database) {
                $DatabaseCollection = $DatabaseCollection | Where-Object Name -In $Database
            }
            if ($ExcludeDatabase) {
                $DatabaseCollection = $DatabaseCollection | Where-Object Name -NotIn $ExcludeDatabase
            }

            if ($DatabaseCollection.Count -gt 0) {
                foreach ($db in $DatabaseCollection) {
                    try {
                        #if SQL 2012 or higher only validate databases with ContainmentType = NONE
                        if ($server.versionMajor -gt 10) {
                            if ($db.ContainmentType -ne [Microsoft.SqlServer.Management.Smo.ContainmentType]::None) {
                                Write-Message -Level Warning -Message "Database '$db' is a contained database. Contained databases can't have orphaned users. Skipping validation."
                                Continue
                            }
                        }
                        Write-Message -Level Verbose -Message "Validating users on database '$db'."
                        $UsersToWork = $db.Users | Where-Object { $_.Login -eq "" -and ($_.ID -gt 4) -and (($_.Sid.Length -gt 16 -and $_.LoginType -in @([Microsoft.SqlServer.Management.Smo.LoginType]::SqlLogin, [Microsoft.SqlServer.Management.Smo.LoginType]::Certificate)) -eq $false) }

                        if ($UsersToWork.Count -gt 0) {
                            Write-Message -Level Verbose -Message "Orphan users found"
                            foreach ($user in $UsersToWork) {
                                [PSCustomObject]@{
                                    ComputerName = $server.ComputerName
                                    InstanceName = $server.ServiceName
                                    SqlInstance  = $server.DomainInstanceName
                                    DatabaseName = $db.Name
                                    User         = $user.Name
                                }
                            }
                        } else {
                            Write-Message -Level Verbose -Message "No orphan users found on database '$db'."
                        }
                        #reset collection
                        $UsersToWork = $null
                    } catch {
                        Stop-Function -Message $_ -Continue
                    }
                }
            } else {
                Write-Message -Level VeryVerbose -Message "There are no databases to analyse."
            }
        }
    }

}

tools\dbatools\functions\Get-DbaPbmCategorySubscription.ps1

function Get-DbaPbmCategorySubscription {
    <#
    .SYNOPSIS
        Returns policy category subscriptions from policy based management from an instance.

    .DESCRIPTION
        Returns policy category subscriptions from policy based management from an instance.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER InputObject
        Allows piping from Get-DbaPbmStore

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Policy, PolicyBasedManagement, PBM
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaPbmCategorySubscription

    .EXAMPLE
        PS C:\> Get-DbaPbmCategorySubscription -SqlInstance sql2016

        Returns all policy category subscriptions from the sql2016 PBM server

    .EXAMPLE
        PS C:\> Get-DbaPbmCategorySubscription -SqlInstance sql2016 -SqlCredential $cred

        Uses a credential $cred to connect and return all policy category subscriptions from the sql2016 PBM server

    #>
    [CmdletBinding()]
    param (
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [Parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Dmf.PolicyStore[]]$InputObject,
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            $InputObject += Get-DbaPbmStore -SqlInstance $instance -SqlCredential $SqlCredential
        }
        foreach ($store in $InputObject) {
            $all = $store.PolicycategorySubscriptions

            foreach ($current in $all) {
                Write-Message -Level Verbose -Message "Processing $current"
                Add-Member -Force -InputObject $current -MemberType NoteProperty ComputerName -value $store.ComputerName
                Add-Member -Force -InputObject $current -MemberType NoteProperty InstanceName -value $store.InstanceName
                Add-Member -Force -InputObject $current -MemberType NoteProperty SqlInstance -value $store.SqlInstance
                Select-DefaultView -InputObject $current -ExcludeProperty Properties, Urn, Parent
            }
        }
    }
}

tools\dbatools\functions\Get-DbaPbmCondition.ps1

function Get-DbaPbmCondition {
    <#
    .SYNOPSIS
        Returns conditions from policy based management from an instance.

    .DESCRIPTION
        Returns conditions from policy based management from an instance.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Condition
        Filters results to only show specific condition

    .PARAMETER IncludeSystemObject
        By default system objects are filtered out. Use this parameter to include them.

    .PARAMETER InputObject
        Allows piping from Get-DbaPbmStore

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Policy, PolicyBasedManagement, PBM
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaPbmCondition

    .EXAMPLE
        PS C:\> Get-DbaPbmCondition -SqlInstance sql2016

        Returns all conditions from the sql2016 PBM server

    .EXAMPLE
        PS C:\> Get-DbaPbmCondition -SqlInstance sql2016 -SqlCredential $cred

        Uses a credential $cred to connect and return all conditions from the sql2016 PBM server

    #>
    [CmdletBinding()]
    param (
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [string[]]$Condition,
        [Parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Dmf.PolicyStore[]]$InputObject,
        [switch]$IncludeSystemObject,
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            $InputObject += Get-DbaPbmStore -SqlInstance $instance -SqlCredential $SqlCredential
        }
        foreach ($store in $InputObject) {
            $allconditions = $store.Conditions

            if (-not $IncludeSystemObject) {
                $allconditions = $allconditions | Where-Object IsSystemObject -eq $false
            }

            if ($Condition) {
                $allconditions = $allconditions | Where-Object Name -in $Condition
            }

            foreach ($currentcondition in $allconditions) {
                Write-Message -Level Verbose -Message "Processing $currentcondition"
                Add-Member -Force -InputObject $currentcondition -MemberType NoteProperty ComputerName -value $store.ComputerName
                Add-Member -Force -InputObject $currentcondition -MemberType NoteProperty InstanceName -value $store.InstanceName
                Add-Member -Force -InputObject $currentcondition -MemberType NoteProperty SqlInstance -value $store.SqlInstance
                Select-DefaultView -InputObject $currentcondition -Property ComputerName, InstanceName, SqlInstance, Id, Name, CreateDate, CreatedBy, DateModified, Description, ExpressionNode, Facet, HasScript, IsSystemObject, ModifiedBy
            }
        }
    }
}

tools\dbatools\functions\Get-DbaPbmObjectSet.ps1

function Get-DbaPbmObjectSet {
    <#
    .SYNOPSIS
        Returns object sets from policy based management.

    .DESCRIPTION
        Returns object sets from policy based management.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER ObjectSet
        Filters results to only show specific object set

    .PARAMETER IncludeSystemObject
        By default system objects are filtered out. Use this parameter to include them.

    .PARAMETER InputObject
        Allows piping from Get-DbaPbmStore

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Policy, PolicyBasedManagement, PBM
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaPbmObjectSet

    .EXAMPLE
        PS C:\> Get-DbaPbmObjectSet -SqlInstance sql2016

        Returns all object sets from the sql2016 PBM instance

    .EXAMPLE
        PS C:\> Get-DbaPbmObjectSet -SqlInstance sql2016 -SqlCredential $cred

        Uses a credential $cred to connect and return all object sets from the sql2016 PBM instance

    #>
    [CmdletBinding()]
    param (
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [string[]]$ObjectSet,
        [Parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Dmf.PolicyStore[]]$InputObject,
        [switch]$IncludeSystemObject,
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            $InputObject += Get-DbaPbmStore -SqlInstance $instance -SqlCredential $SqlCredential
        }
        foreach ($store in $InputObject) {
            $all = $store.ObjectSets

            if (-not $IncludeSystemObject) {
                $all = $all | Where-Object IsSystemObject -eq $false
            }

            if ($ObjectSet) {
                $all = $all | Where-Object Name -in $ObjectSet
            }

            foreach ($currentset in $all) {
                Write-Message -Level Verbose -Message "Processing $currentset"
                Add-Member -Force -InputObject $currentset -MemberType NoteProperty ComputerName -value $store.ComputerName
                Add-Member -Force -InputObject $currentset -MemberType NoteProperty InstanceName -value $store.InstanceName
                Add-Member -Force -InputObject $currentset -MemberType NoteProperty SqlInstance -value $store.SqlInstance
                Select-DefaultView -InputObject $currentset -Property ComputerName, InstanceName, SqlInstance, Id, Name, Facet, TargetSets, IsSystemObject
            }
        }
    }
}

tools\dbatools\functions\Get-DbaPbmPolicy.ps1

function Get-DbaPbmPolicy {
    <#
    .SYNOPSIS
        Returns policies from Policy-Based Management from an instance.

    .DESCRIPTION
        Returns details of policies with the option to filter on Category and SystemObjects.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Policy
        Filters results to only show specific policy

    .PARAMETER Category
        Filters results to only show policies in the category selected

    .PARAMETER IncludeSystemObject
        By default system objects are filtered out. Use this parameter to INCLUDE them .

    .PARAMETER InputObject
        Allows piping from Get-DbaPbmStore

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Policy, PolicyBasedManagement, PBM
        Author: Stephen Bennett, https://sqlnotesfromtheunderground.wordpress.com/

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaPbmPolicy

    .EXAMPLE
        PS C:\> Get-DbaPbmPolicy -SqlInstance sql2016

        Returns all policies from sql2016 server

    .EXAMPLE
        PS C:\> Get-DbaPbmPolicy -SqlInstance sql2016 -SqlCredential $cred

        Uses a credential $cred to connect and return all policies from sql2016 instance

    .EXAMPLE
        PS C:\> Get-DbaPbmPolicy -SqlInstance sql2016 -Category MorningCheck

        Returns all policies from sql2016 server that part of the PolicyCategory MorningCheck

    #>
    [CmdletBinding()]
    param (
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [string[]]$Policy,
        [string[]]$Category,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Dmf.PolicyStore[]]$InputObject,
        [switch]$IncludeSystemObject,
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            $InputObject += Get-DbaPbmStore -SqlInstance $instance -SqlCredential $SqlCredential
        }
        foreach ($store in $InputObject) {
            $allpolicies = $store.Policies

            if (-not $IncludeSystemObject) {
                $allpolicies = $allpolicies | Where-Object IsSystemObject -eq $false
            }

            if ($Category) {
                $allpolicies = $allpolicies | Where-Object PolicyCategory -in $Category
            }

            if ($Policy) {
                $allpolicies = $allpolicies | Where-Object Name -in $Policy
            }

            foreach ($currentpolicy in $allpolicies) {
                Write-Message -Level Verbose -Message "Processing $currentpolicy"
                Add-Member -Force -InputObject $currentpolicy -MemberType NoteProperty ComputerName -value $store.ComputerName
                Add-Member -Force -InputObject $currentpolicy -MemberType NoteProperty InstanceName -value $store.InstanceName
                Add-Member -Force -InputObject $currentpolicy -MemberType NoteProperty SqlInstance -value $store.SqlInstance

                Select-DefaultView -InputObject $currentpolicy -ExcludeProperty HelpText, HelpLink, Urn, Properties, Metadata, Parent, IdentityKey, HasScript, PolicyEvaluationStarted, ConnectionProcessingStarted, TargetProcessed, ConnectionProcessingFinished, PolicyEvaluationFinished, PropertyMetadataChanged, PropertyChanged
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Get-DbaPolicy
    }
}

tools\dbatools\functions\Get-DbaDbMailConfig.ps1

function Get-DbaDbMailConfig {
    <#
    .SYNOPSIS
        Gets database mail configs from SQL Server

    .DESCRIPTION
        Gets database mail configs from SQL Server

    .PARAMETER SqlInstance
        TThe target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Name
        Specifies one or more config(s) to get. If unspecified, all configs will be returned.

    .PARAMETER InputObject
        Accepts pipeline input from Get-DbaDbMail

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: DatabaseMail, DBMail, Mail
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaDbMailConfig

    .EXAMPLE
        PS C:\> Get-DbaDbMailConfig -SqlInstance sql01\sharepoint

        Returns DBMail configs on sql01\sharepoint

    .EXAMPLE
        PS C:\> Get-DbaDbMailConfig -SqlInstance sql01\sharepoint -Name ProhibitedExtensions

        Returns the ProhibitedExtensions configuration on sql01\sharepoint

    .EXAMPLE
        PS C:\> Get-DbaDbMailConfig -SqlInstance sql01\sharepoint | Select *

        Returns the DBMail configs on sql01\sharepoint then return a bunch more columns

    .EXAMPLE
        PS C:\> $servers = "sql2014","sql2016", "sqlcluster\sharepoint"
        PS C:\> $servers | Get-DbaDbMail | Get-DbaDbMailConfig

        Returns the DBMail configs for "sql2014","sql2016" and "sqlcluster\sharepoint"

    #>
    [CmdletBinding()]
    param (
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [Alias("Config", "ConfigName")]
        [string[]]$Name,
        [Parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Mail.SqlMail[]]$InputObject,
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            $InputObject += Get-DbaDbMail -SqlInstance $SqlInstance -SqlCredential $SqlCredential
        }

        if (-not $InputObject) {
            Stop-Function -Message "No servers to process"
            return
        }

        foreach ($mailserver in $InputObject) {
            try {
                $configs = $mailserver.ConfigurationValues

                if ($Name) {
                    $configs = $configs | Where-Object Name -in $Name
                }

                $configs | Add-Member -Force -MemberType NoteProperty -Name ComputerName -value $mailserver.ComputerName
                $configs | Add-Member -Force -MemberType NoteProperty -Name InstanceName -value $mailserver.InstanceName
                $configs | Add-Member -Force -MemberType NoteProperty -Name SqlInstance -value $mailserver.SqlInstance
                $configs | Select-DefaultView -Property ComputerName, InstanceName, SqlInstance, Name, Value, Description
            } catch {
                Stop-Function -Message "Failure" -ErrorRecord $_ -Continue
            }
        }
    }
}

tools\dbatools\functions\Get-DbaPfDataCollectorCounter.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaPfDataCollectorCounter {
    <#
    .SYNOPSIS
        Gets Performance Counters.

    .DESCRIPTION
        Gets Performance Counters.

    .PARAMETER ComputerName
        The target computer. Defaults to localhost.

    .PARAMETER Credential
        Allows you to login to servers using alternative credentials. To use:

        $scred = Get-Credential, then pass $scred object to the -Credential parameter.

    .PARAMETER CollectorSet
        The Collector Set name.

    .PARAMETER Collector
        The Collector name.

    .PARAMETER Counter
        The Counter name to capture. This must be in the form of '\Processor(_Total)\% Processor Time'.

    .PARAMETER InputObject
        Accepts the object output by Get-DbaPfDataCollectorSet via the pipeline.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Performance, DataCollector, PerfCounter
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaPfDataCollectorCounter

    .EXAMPLE
        PS C:\> Get-DbaPfDataCollectorCounter

        Gets all counters for all Collector Sets on localhost.

    .EXAMPLE
        PS C:\> Get-DbaPfDataCollectorCounter -ComputerName sql2017

        Gets all counters for all Collector Sets on  on sql2017.

    .EXAMPLE
        PS C:\> Get-DbaPfDataCollectorCounter -ComputerName sql2017 -Counter '\Processor(_Total)\% Processor Time'

        Gets the '\Processor(_Total)\% Processor Time' counter on sql2017.

    .EXAMPLE
        PS C:\> Get-DbaPfDataCollectorCounter -ComputerName sql2017, sql2016 -Credential ad\sqldba -CollectorSet 'System Correlation'

        Gets all counters for the 'System Correlation' CollectorSet on sql2017 and sql2016 using alternative credentials.

    .EXAMPLE
        PS C:\> Get-DbaPfDataCollectorSet -CollectorSet 'System Correlation' | Get-DbaPfDataCollector | Get-DbaPfDataCollectorCounter

        Gets all counters for the 'System Correlation' CollectorSet.

    #>
    [CmdletBinding()]
    param (
        [DbaInstance[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [Alias("DataCollectorSet")]
        [string[]]$CollectorSet,
        [Alias("DataCollector")]
        [string[]]$Collector,
        [string[]]$Counter,
        [parameter(ValueFromPipeline)]
        [object[]]$InputObject,
        [switch]$EnableException
    )
    begin {
        #Variable marked as unused by PSScriptAnalyzer
        #$columns = 'ComputerName', 'Name', 'DataCollectorSet', 'Counters', 'DataCollectorType', 'DataSourceName', 'FileName', 'FileNameFormat', 'FileNameFormatPattern', 'LatestOutputLocation', 'LogAppend', 'LogCircular', 'LogFileFormat', 'LogOverwrite', 'SampleInterval', 'SegmentMaxRecords'
    }
    process {
        
        
        if ($InputObject.Credential -and (Test-Bound -ParameterName Credential -Not)) {
            $Credential = $InputObject.Credential
        }

        if (-not $InputObject -or ($InputObject -and (Test-Bound -ParameterName ComputerName))) {
            foreach ($computer in $ComputerName) {
                $InputObject += Get-DbaPfDataCollector -ComputerName $computer -Credential $Credential -CollectorSet $CollectorSet -Collector $Collector
            }
        }

        if ($InputObject) {
            if (-not $InputObject.DataCollectorObject) {
                Stop-Function -Message "InputObject is not of the right type. Please use Get-DbaPfDataCollector."
                return
            }
        }

        foreach ($counterobject in $InputObject) {
            foreach ($countername in $counterobject.Counters) {
                if ($Counter -and $Counter -notcontains $countername) { continue }
                [pscustomobject]@{
                    ComputerName        = $counterobject.ComputerName
                    DataCollectorSet    = $counterobject.DataCollectorSet
                    DataCollector       = $counterobject.Name
                    DataCollectorSetXml = $counterobject.DataCollectorSetXml
                    Name                = $countername
                    FileName            = $counterobject.FileName
                    CounterObject       = $true
                    Credential          = $Credential
                } | Select-DefaultView -ExcludeProperty DataCollectorObject, Credential, CounterObject, DataCollectorSetXml
            }
        }
    }
}

tools\dbatools\functions\Get-DbaPfDataCollectorCounterSample.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaPfDataCollectorCounterSample {
    <#
    .SYNOPSIS
        Gets Performance Counter Samples.

    .DESCRIPTION
        Gets Performance Counter Samples.

    .PARAMETER ComputerName
        The target computer. Defaults to localhost.

    .PARAMETER Credential
        Allows you to login to servers using alternative credentials. To use:

        $scred = Get-Credential, then pass $scred object to the -Credential parameter.

    .PARAMETER CollectorSet
        The Collector Set name.

    .PARAMETER Collector
        The Collector name.

    .PARAMETER Counter
        The Counter name. This must be in the form of '\Processor(_Total)\% Processor Time'.

    .PARAMETER Continuous
        If this switch is enabled, samples will be retrieved continuously until you press CTRL+C. By default, this command gets only one counter sample. You can use the SampleInterval parameter to set the interval for continuous sampling.

    .PARAMETER ListSet
        Gets the specified performance counter sets on the computers. Enter the names of the counter sets. Wildcards are permitted.

    .PARAMETER MaxSamples
        Specifies the number of samples to get from each counter. The default is 1 sample. To get samples continuously (no maximum sample size), use the Continuous parameter.

        To collect a very large data set, consider running a Get-DbaPfDataCollectorCounterSample command as a Windows PowerShell background job.

    .PARAMETER SampleInterval
        Specifies the time between samples in seconds. The minimum value and the default value are 1 second.

    .PARAMETER InputObject
        Accepts the object output by Get-DbaPfDataCollectorCounter via the pipeline.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Performance, DataCollector, PerfCounter
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaPfDataCollectorCounterSample

    .EXAMPLE
        PS C:\> Get-DbaPfDataCollectorCounterSample

        Gets a single sample for all counters for all Collector Sets on localhost.

    .EXAMPLE
        PS C:\> Get-DbaPfDataCollectorCounterSample -Counter '\Processor(_Total)\% Processor Time'

        Gets a single sample for all counters for all Collector Sets on localhost.

    .EXAMPLE
        PS C:\> Get-DbaPfDataCollectorCounter -ComputerName sql2017, sql2016 | Out-GridView -PassThru | Get-DbaPfDataCollectorCounterSample -MaxSamples 10

        Gets 10 samples for all counters for all Collector Sets for servers sql2016 and sql2017.

    .EXAMPLE
        PS C:\> Get-DbaPfDataCollectorCounterSample -ComputerName sql2017

        Gets a single sample for all counters for all Collector Sets on sql2017.

    .EXAMPLE
        PS C:\> Get-DbaPfDataCollectorCounterSample -ComputerName sql2017, sql2016 -Credential ad\sqldba -CollectorSet 'System Correlation'

        Gets a single sample for all counters for the 'System Correlation' CollectorSet on sql2017 and sql2016 using alternative credentials.

    .EXAMPLE
        PS C:\> Get-DbaPfDataCollectorCounterSample -CollectorSet 'System Correlation'

        Gets a single sample for all counters for the 'System Correlation' CollectorSet.

    #>
    [CmdletBinding()]
    param (
        [DbaInstance[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [Alias("DataCollectorSet")]
        [string[]]$CollectorSet,
        [Alias("DataCollector")]
        [string[]]$Collector,
        [string[]]$Counter,
        [switch]$Continuous,
        [switch[]]$ListSet,
        [int]$MaxSamples,
        [int]$SampleInterval,
        [parameter(ValueFromPipeline)]
        [object[]]$InputObject,
        [switch]$EnableException
    )
    process {
        
        
        if ($InputObject.Credential -and (Test-Bound -ParameterName Credential -Not)) {
            $Credential = $InputObject.Credential
        }

        if ($InputObject.Counter -and (Test-Bound -ParameterName Counter -Not)) {
            $Counter = $InputObject.Counter
        }

        if (-not $InputObject -or ($InputObject -and (Test-Bound -ParameterName ComputerName))) {
            foreach ($computer in $ComputerName) {
                $InputObject += Get-DbaPfDataCollectorCounter -ComputerName $computer -Credential $Credential -CollectorSet $CollectorSet -Collector $Collector
            }
        }

        if ($InputObject) {
            if (-not $InputObject.CounterObject) {
                Stop-Function -Message "InputObject is not of the right type. Please use Get-DbaPfDataCollectorCounter."
                return
            }
        }

        foreach ($counterobject in $InputObject) {
            if ((Test-Bound -ParameterName Counter) -and ($Counter -notcontains $counterobject.Name)) { continue }
            $params = @{
                Counter = $counterobject.Name
            }

            if (-not ([dbainstance]$counterobject.ComputerName).IsLocalHost) {
                $params.Add("ComputerName", $counterobject.ComputerName)
            }

            if ($Credential) {
                $params.Add("Credential", $Credential)
            }

            if ($Continuous) {
                $params.Add("Continuous", $Continuous)
            }

            if ($ListSet) {
                $params.Add("ListSet", $ListSet)
            }

            if ($MaxSamples) {
                $params.Add("MaxSamples", $MaxSamples)
            }

            if ($SampleInterval) {
                $params.Add("SampleInterval", $SampleInterval)
            }

            if ($Continuous) {
                Get-Counter @params
            } else {
                try {
                    $pscounters = Get-Counter @params -ErrorAction Stop
                } catch {
                    Stop-Function -Message "Failure for $($counterobject.Name) on $($counterobject.ComputerName)." -ErrorRecord $_ -Continue
                }

                foreach ($pscounter in $pscounters) {
                    foreach ($sample in $pscounter.CounterSamples) {
                        [pscustomobject]@{
                            ComputerName           = $counterobject.ComputerName
                            DataCollectorSet       = $counterobject.DataCollectorSet
                            DataCollector          = $counterobject.DataCollector
                            Name                   = $counterobject.Name
                            Timestamp              = $pscounter.Timestamp
                            Path                   = $sample.Path
                            InstanceName           = $sample.InstanceName
                            CookedValue            = $sample.CookedValue
                            RawValue               = $sample.RawValue
                            SecondValue            = $sample.SecondValue
                            MultipleCount          = $sample.MultipleCount
                            CounterType            = $sample.CounterType
                            SampleTimestamp        = $sample.Timestamp
                            SampleTimestamp100NSec = $sample.Timestamp100NSec
                            Status                 = $sample.Status
                            DefaultScale           = $sample.DefaultScale
                            TimeBase               = $sample.TimeBase
                            Sample                 = $pscounter.CounterSamples
                            CounterSampleObject    = $true
                        } | Select-DefaultView -ExcludeProperty Sample, CounterSampleObject
                    }
                }
            }
        }
    }
}

tools\dbatools\functions\Get-DbaSsisExecutionHistory.ps1

#ValidationTags#Messaging#
function Get-DbaSsisExecutionHistory {
    <#
    .SYNOPSIS
        Get-DbaSsisHistory Retreives SSIS project and package execution History, and environments from one SQL Server to another.

    .DESCRIPTION
        This command gets execution history for SSIS executison given one or more instances and can be filtered by Project, Environment,Folder or Status.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.
        This can be a collection and receive pipeline input to allow the function
        to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Project
        Specifies a filter by project

    .PARAMETER Folder
        Specifies a filter by folder

    .PARAMETER Environment
        Specifies a filter by environment

    .PARAMETER Status
        Specifies a filter by status (created,running,cancelled,failed,pending,halted,succeeded,stopping,completed)

    .PARAMETER Since
        Datetime object used to narrow the results to a date

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Migration, SSIS
        Author: Chris Tucker (@ChrisTuc47368095)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaSsisExecutionHistory

    .EXAMPLE
        PS C:\> Get-DbaSsisExecutionHistory -SqlInstance SMTQ01 -Folder SMTQ_PRC

        Get all history items for SMTQ01 in folder SMTQ_PRC.

    .EXAMPLE
        PS C:\> Get-DbaSsisExecutionHistory -SqlInstance SMTQ01 -Status Failed,Cancelled

        Gets all failed or canceled executions for SMTQ01.

    .EXAMPLE
        PS C:\> Get-DbaSsisExecutionHistory -SqlInstance SMTQ01,SMTQ02 -Status Failed,Cancelled -Whatif

        Shows what would happen if the command were executed and would return the SQL statement that would be executed per instance.

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory)]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [datetime]$Since,
        [ValidateSet("Created", "Running", "Cancelled", "Failed", "Pending", "Halted", "Succeeded", "Stopping", "Completed")]
        [String[]]$Status,
        [String[]]$Project,
        [String[]]$Folder,
        [String[]]$Environment,
        [switch]$EnableException
    )
    begin {
        $params = @{}

        #build status parameter
        $statuses = @{
            'Created'   = 1
            'Running'   = 2
            'Cancelled' = 3
            'Failed'    = 4
            'Pending'   = 5
            'Halted'    = 6
            'Succeeded' = 7
            'Stopping'  = 8
            'Completed' = 9
        }
        if ($Status) {
            $csv = ($statuses[$Status] -join ',')
            $statusq = "`n`t`tAND e.[Status] in ($csv)"
        } else {
            $statusq = ''
        }

        #construct parameterized collection predicate for project array
        if ($Project) {
            $projectq = "`n`t`tAND ( 1=0 "
            $i = 0
            foreach ($p in $Project) {
                $i ++
                $projectq += "`n`t`t`tOR e.[project_name] = @project$i"
                $params.Add("project$i", $p)
            }
            $projectq += "`n`t`t)"
        } else {
            $projectq = ''
        }

        #construct parameterized collection predicate for folder array
        if ($Folder) {
            $folderq = "`n`t`tAND ( 1=0 "
            $i = 0
            foreach ($f in $Folder) {
                $i ++
                $folderq += "`n`t`t`tOR e.[folder_name] = @folder$i"
                $params.Add("folder$i" , $f)
            }
            $folderq += "`n`t`t)"
        } else {
            $folderq = ''
        }

        #construct parameterized collection predicate for environment array
        if ($Environment) {
            $environmentq = "`n`t`tAND ( 1=0 "
            $i = 0
            foreach ($e in $Environment) {
                $i ++
                $environmentq += "`n`t`t`tOR e.[environment_name] = @environment$i"
                $params.Add("environment$i" , $e)
            }
            $environmentq += "`n`t`t)"
        } else {
            $environmentq = ''
        }

        #construct date filter for since
        if ($Since) {
            $sinceq = "`n`t`tAND e.[start_time] >= @since"
            $params.Add('since', $Since )
        }

        $sql = "
        WITH
            cteLoglevel as (
                SELECT
                    execution_id as ExecutionID,
                    cast(parameter_value AS INT) AS LoggingLevel
                FROM
                    [catalog].[execution_parameter_values]
                WHERE
                    parameter_name = 'LOGGING_LEVEL'
            )
            , cteStatus AS (
                SELECT
                     [key]
                    ,[code]
                FROM (
                    VALUES
                          ( 1,'Created'  )
                        , ( 2,'Running'  )
                        , ( 3,'Cancelled')
                        , ( 4,'Failed'   )
                        , ( 5,'Pending'  )
                        , ( 6,'Halted'   )
                        , ( 7,'Succeeded')
                        , ( 8,'Stopping' )
                        , ( 9,'Completed')
                ) codes([key],[code])
            )
            SELECT
                      e.execution_id as ExecutionID
                    , e.folder_name as FolderName
                    , e.project_name as ProjectName
                    , e.package_name as PackageName
                    , e.project_lsn as ProjectLsn
                    , Environment = isnull(e.environment_folder_name, '') + isnull('\' + e.environment_name,  '')
                    , s.code AS StatusCode
                    , start_time as StartTime
                    , end_time as EndTime
                    , ElapsedMinutes = DATEDIFF(ss, e.start_time, e.end_time)
                    , l.LoggingLevel
            FROM
                [catalog].executions e
                LEFT OUTER JOIN cteLoglevel l
                    ON e.execution_id = l.ExecutionID
                LEFT OUTER JOIN cteStatus s
                    ON s.[key] = e.status
            WHERE 1=1$statusq$projectq$folderq$environmentq$sinceq
            OPTION  ( RECOMPILE );
        "

        #debug verbose output
        Write-Message -Level Debug -Message "`nSQL statement: $sql"
        $paramout = ($params | Out-String)
        Write-Message -Level Debug -Message "`nParameters:$paramout"
    }


    process {
        foreach ($instance in $SqlInstance) {
            $results = Invoke-DbaQuery -SqlInstance $instance -Database SSISDB -Query $sql -as PSObject -SqlParameters $params -SqlCredential $SqlCredential
            foreach ($row in $results) {
                $row.StartTime = [dbadatetime]$row.StartTime.DateTime
                $row.EndTime = [dbadatetime]$row.EndTime.DateTime
                $row
            }
        }
    }
}

tools\dbatools\functions\Get-DbaStartupParameter.ps1

function Get-DbaStartupParameter {
    <#
    .SYNOPSIS
        Displays values for a detailed list of SQL Server Startup Parameters.

    .DESCRIPTION
        Displays values for a detailed list of SQL Server Startup Parameters including Master Data Path, Master Log path, Error Log, Trace Flags, Parameter String and much more.

        This command relies on remote Windows Server (SQL WMI/WinRm) access. You can pass alternative Windows credentials by using the -Credential parameter.

        See https://msdn.microsoft.com/en-us/library/ms190737.aspx for more information.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER Credential
        Allows you to login to servers using alternate Windows credentials.

        $scred = Get-Credential, then pass $scred object to the -Credential parameter.

    .PARAMETER Simple
        If this switch is enabled, simplified output will be produced including only Server, Master Data Path, Master Log path, ErrorLog, TraceFlags and ParameterString.

    .PARAMETER EnableException
        If this switch is enabled, exceptions will be thrown to the caller, which will need to perform its own exception processing. Otherwise, the function will try to catch the exception, interpret it and provide a friendly error message.

    .NOTES
        Tags: WSMan, SQLWMI, Memory
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaStartupParameter

    .EXAMPLE
        PS C:\> Get-DbaStartupParameter -SqlInstance sql2014

        Logs into SQL WMI as the current user then displays the values for numerous startup parameters.

    .EXAMPLE
        PS C:\> $wincred = Get-Credential ad\sqladmin
        PS C:\> Get-DbaStartupParameter -SqlInstance sql2014 -Credential $wincred -Simple

        Logs in to WMI using the ad\sqladmin credential and gathers simplified information about the SQL Server Startup Parameters.

    #>
    [CmdletBinding()]
    param (
        [parameter(ValueFromPipeline, Mandatory)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("SqlCredential")]
        [PSCredential]$Credential,
        [switch]$Simple,
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $computerName = $instance.ComputerName
                $instanceName = $instance.InstanceName
                $ogInstance = $instance.FullSmoName

                $computerName = (Resolve-DbaNetworkName -ComputerName $computerName).FullComputerName


                if ($instanceName.Length -eq 0) { $instanceName = "MSSQLSERVER" }

                $displayname = "SQL Server ($instanceName)"

                $Scriptblock = {
                    $computerName = $args[0]
                    $displayname = $args[1]

                    $wmisvc = $wmi.Services | Where-Object DisplayName -eq $displayname

                    $params = $wmisvc.StartupParameters -split ';'

                    $masterdata = $params | Where-Object { $_.StartsWith('-d') }
                    $masterlog = $params | Where-Object { $_.StartsWith('-l') }
                    $errorlog = $params | Where-Object { $_.StartsWith('-e') }
                    $traceflags = $params | Where-Object { $_.StartsWith('-T') }

                    $debugflag = $params | Where-Object { $_.StartsWith('-t') }

                    if ($debugflag.length -ne 0) {
                        Write-Message -Level Warning "$instance is using the lowercase -t trace flag. This is for internal debugging only. Please ensure this was intentional."
                    }
                    #>

                    if ($traceflags.length -eq 0) {
                        $traceflags = "None"
                    } else {
                        $traceflags = $traceflags.substring(2)
                    }

                    if ($Simple -eq $true) {
                        [PSCustomObject]@{
                            ComputerName    = $computerName
                            InstanceName    = $instanceName
                            SqlInstance     = $ogInstance
                            MasterData      = $masterdata.TrimStart('-d')
                            MasterLog       = $masterlog.TrimStart('-l')
                            ErrorLog        = $errorlog.TrimStart('-e')
                            TraceFlags      = $traceflags -join ','
                            ParameterString = $wmisvc.StartupParameters
                        }
                    } else {
                        # From https://msdn.microsoft.com/en-us/library/ms190737.aspx

                        $commandpromptparm = $params | Where-Object { $_ -eq '-c' }
                        $minimalstartparm = $params | Where-Object { $_ -eq '-f' }
                        $memorytoreserve = $params | Where-Object { $_.StartsWith('-g') }
                        $noeventlogsparm = $params | Where-Object { $_ -eq '-n' }
                        $instancestartparm = $params | Where-Object { $_ -eq '-s' }
                        $disablemonitoringparm = $params | Where-Object { $_ -eq '-x' }
                        $increasedextentsparm = $params | Where-Object { $_ -ceq '-E' }

                        $minimalstart = $noeventlogs = $instancestart = $disablemonitoring = $false
                        $increasedextents = $commandprompt = $singleuser = $false

                        if ($null -ne $commandpromptparm) {
                            $commandprompt = $true
                        }
                        if ($null -ne $minimalstartparm) {
                            $minimalstart = $true
                        }
                        if ($null -eq $memorytoreserve) {
                            $memorytoreserve = 0
                        }
                        if ($null -ne $noeventlogsparm) {
                            $noeventlogs = $true
                        }
                        if ($null -ne $instancestartparm) {
                            $instancestart = $true
                        }
                        if ($null -ne $disablemonitoringparm) {
                            $disablemonitoring = $true
                        }
                        if ($null -ne $increasedextentsparm) {
                            $increasedextents = $true
                        }

                        $singleuserparm = $params | Where-Object { $_.StartsWith('-m') }

                        if ($singleuserparm.length -ne 0) {
                            $singleuser = $true
                            $singleuserdetails = $singleuserparm.TrimStart('-m')
                        }

                        [PSCustomObject]@{
                            ComputerName         = $computerName
                            InstanceName         = $instanceName
                            SqlInstance          = $ogInstance
                            MasterData           = $masterdata -replace '^-[dD]', ''
                            MasterLog            = $masterlog -replace '^-[lL]', ''
                            ErrorLog             = $errorlog -replace '^-[eE]', ''
                            TraceFlags           = $traceflags -join ','
                            CommandPromptStart   = $commandprompt
                            MinimalStart         = $minimalstart
                            MemoryToReserve      = $memorytoreserve
                            SingleUser           = $singleuser
                            SingleUserName       = $singleuserdetails
                            NoLoggingToWinEvents = $noeventlogs
                            StartAsNamedInstance = $instancestart
                            DisableMonitoring    = $disablemonitoring
                            IncreasedExtents     = $increasedextents
                            ParameterString      = $wmisvc.StartupParameters
                        }
                    }
                }

                # This command is in the internal function
                # It's sorta like Invoke-Command.
                if ($credential) {
                    Invoke-ManagedComputerCommand -Server $computerName -Credential $credential -ScriptBlock $Scriptblock -ArgumentList $computerName, $displayname
                } else {
                    Invoke-ManagedComputerCommand -Server $computerName -ScriptBlock $Scriptblock -ArgumentList $computerName, $displayname
                }
            } catch {
                Stop-Function -Message "$instance failed." -ErrorRecord $_ -Continue -Target $instance
            }
        }
    }
}

tools\dbatools\functions\Get-DbaSuspectPage.ps1

function Get-DbaSuspectPage {
    <#
    .SYNOPSIS
        Returns data that is stored in SQL for Suspect Pages on the specified SQL Server Instance

    .DESCRIPTION
        This function returns any records that were stored due to suspect pages in databases on a SQL Server Instance.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances

    .PARAMETER SqlCredential
        A credential to use to connect to the SQL Instance rather than using Windows Authentication

    .PARAMETER Database
        The database to return. If unspecified, all records will be returned.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Pages, DBCC
        Author: Garry Bargsley (@gbargsley), http://blog.garrybargsley.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Get-DbaSuspectPage -SqlInstance sql2016

        Retrieve any records stored for Suspect Pages on the sql2016 SQL Server.

    .EXAMPLE
        PS C:\> Get-DbaSuspectPage -SqlInstance sql2016 -Database Test

        Retrieve any records stored for Suspect Pages on the sql2016 SQL Server and the Test database only.

    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [object]$Database,
        [PSCredential]$SqlCredential,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ($instance in $sqlinstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
                return
            }

            $sql = "Select
            DB_NAME(database_id) as DBName,
            file_id,
            page_id,
            CASE event_type
            WHEN 1 THEN '823 or 824 or Torn Page'
            WHEN 2 THEN 'Bad Checksum'
            WHEN 3 THEN 'Torn Page'
            WHEN 4 THEN 'Restored'
            WHEN 5 THEN 'Repaired (DBCC)'
            WHEN 7 THEN 'Deallocated (DBCC)'
            END as EventType,
            error_count,
            last_update_date
            from msdb.dbo.suspect_pages"

            try {
                $results = $server.Query($sql)
            } catch {
                Stop-Function -Message "Issue collecting data on $server" -Target $server -ErrorRecord $_ -Continue
            }

            if ($Database) {
                $results = $results | Where-Object DBName -EQ $Database
            }

        }
        foreach ($row in $results) {
            [PSCustomObject]@{
                ComputerName   = $server.ComputerName
                InstanceName   = $server.ServiceName
                SqlInstance    = $server.DomainInstanceName
                Database       = $row.DBName
                FileId         = $row.file_id
                PageId         = $row.page_id
                EventType      = $row.EventType
                ErrorCount     = $row.error_count
                LastUpdateDate = $row.last_update_date
            }
        }
    }
}

tools\dbatools\functions\Get-DbaTcpPort.ps1

function Get-DbaTcpPort {
    <#
    .SYNOPSIS
        Returns the TCP port used by the specified SQL Server.

    .DESCRIPTION
        By default, this function returns just the TCP port used by the specified SQL Server.

        If -All is specified, the server name, IPAddress (ipv4 and ipv6), port number and an indicator of whether or not the port assignment is static are returned.

        Remote sqlwmi is used by default. If this doesn't work, then remoting is used. If neither work, it defaults to T-SQL which can provide only the port.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Allows you to connect to servers using alternate Windows credentials

        $scred = Get-Credential, then pass $scred object to the -SqlCredential parameter.

    .PARAMETER All
        If this switch is enabled, an object with server name, IPAddress (ipv4 and ipv6), port and static ($true/$false) for one or more SQL Servers is returned.

    .PARAMETER Detailed
        Output all properties, will be deprecated in 1.0.0 release. Use All instead.

    .PARAMETER ExcludeIpv6
        If this switch is enabled, IPv6 information is excluded from All output.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: SQLWMI, tcp
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaTcpPort

    .EXAMPLE
        PS C:\> Get-DbaTcpPort -SqlInstance sqlserver2014a

        Returns just the port number for the default instance on sqlserver2014a.

    .EXAMPLE
        PS C:\> Get-DbaTcpPort -SqlInstance winserver\sqlexpress, sql2016

        Returns an object with server name and port number for the sqlexpress on winserver and the default instance on sql2016.

    .EXAMPLE
        PS C:\> Get-DbaTcpPort -SqlInstance sqlserver2014a, sql2016 -All

        Returns an object with server name, IPAddress (ipv4 and ipv6), port and static ($true/$false) for sqlserver2014a and sql2016.

        Remote sqlwmi is used by default. If this doesn't work, then remoting is used. If neither work, it defaults to T-SQL which can provide only the port.

    .EXAMPLE
        PS C:\> Get-DbaCmsRegServer -SqlInstance sql2014 | Get-DbaTcpPort -ExcludeIpv6 -All

        Returns an object with server name, IPAddress (just ipv4), port and static ($true/$false) for every server listed in the Central Management Server on sql2014.

       #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [switch]$Detailed,
        [switch]$All,
        [Alias("Ipv4")]
        [switch]$ExcludeIpv6,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {
        Test-DbaDeprecation -DeprecatedOn 1.0.0 -Parameter Detailed
    }
    process {
        foreach ($instance in $SqlInstance) {
            if ($All) {
                try {
                    $scriptblock = {
                        $instance = $args[0]

                        Add-Type -AssemblyName Microsoft.VisualBasic

                        foreach ($servername in $wmi.ServerInstances) {
                            $instanceName = $servername.Name
                            $wmiinstance = $wmi.Services | Where-Object { $_.DisplayName -eq "SQL Server ($instanceName)" }
                            $vsname = ($wmiinstance.AdvancedProperties | Where-Object { $_ -match 'VSNAME' }).Value

                            if ($vsname.length -eq 0) {
                                $vsname = "$instance\$instanceName"
                            }

                            $vsname = $vsname.Replace("\MSSQLSERVER", "")

                            try {
                                $regroot = ($wmiinstance.AdvancedProperties | Where-Object { $_ -match 'REGROOT' }).Value
                                $dacport = (Get-ItemProperty "HKLM:\$regroot\MSSQLServer\SuperSocketNetLib\AdminConnection\Tcp").TcpDynamicPorts

                                [PsCustomObject]@{
                                    ComputerName = $instance
                                    InstanceName = $instanceName
                                    SqlInstance  = $vsname
                                    IPAddress    = "0.0.0.0"
                                    Port         = $dacport
                                    Static       = $false
                                    Type         = "DAC"
                                }
                            } catch {
                                # Shouldn't have an empty catch block
                                # Use write-verbose becaues it's remote and write-message may note exist
                                Write-Verbose -Message "it's just not our day"
                            }

                            $tcp = $servername.ServerProtocols | Where-Object Name -eq Tcp
                            $ips = $tcp.IPAddresses

                            # This is a remote command so do not use Write-message
                            Write-Verbose "Parsing information for $($ips.count) IP addresses."
                            foreach ($ip in $ips) {
                                $props = $ip.IPAddressProperties | Where-Object { $_.Name -eq "TcpPort" -or $_.Name -eq "TcpDynamicPorts" }

                                foreach ($prop in $props) {
                                    if ([Microsoft.VisualBasic.Information]::IsNumeric($prop.value)) {
                                        $port = $prop.value
                                        if ($prop.name -eq 'TcpPort') {
                                            $static = $true
                                        } else {
                                            $static = $false
                                        }
                                    }
                                }
                                [PsCustomObject]@{
                                    ComputerName = $instance
                                    InstanceName = $instanceName
                                    SqlInstance  = $vsname
                                    IPAddress    = $ip.IPAddress.IPAddressToString
                                    Port         = $port
                                    Static       = $static
                                    Type         = "Normal"
                                }
                            }
                        }
                    }

                    $computer = $instance.ComputerName
                    $resolved = Resolve-DbaNetworkName -ComputerName $instance
                    $computername = $resolved.FullComputerName
                    $fqdn = $resolved.Fqdn

                    try {
                        Write-Message -Level Verbose -Message "Trying with ComputerName ($computer)."
                        $someIps = Invoke-ManagedComputerCommand -ComputerName $computer -Credential $Credential -ArgumentList $computer -ScriptBlock $scriptblock
                    } catch {
                        Write-Message -Level Verbose -Message "Trying with FullComputerName because ComputerName failed."
                        $someIps = Invoke-ManagedComputerCommand -ComputerName $computername -Credential $Credential -ArgumentList $fqdn -ScriptBlock $scriptblock
                    }
                } catch {
                    Stop-Function -Message "Could not get all information." -Target $instance -ErrorRecord $_
                }

                $results = $someIps | Sort-Object IPAddress

                if ($ExcludeIpv6) {
                    $octet = '(?:0?0?[0-9]|0?[1-9][0-9]|1[0-9]{2}|2[0-5][0-5]|2[0-4][0-9])'
                    [regex]$ipv4 = "^(?:$octet\.){3}$octet$"
                    $results = $results | Where-Object { $_.IPAddress -match $ipv4 }
                }

                $results
            }
            #Default Execution of Get-DbaTcpPort
            if (-not $All -or ($All -and ($null -eq $someIps))) {
                try {
                    $server = Connect-SqlInstance -SqlInstance "TCP:$instance" -SqlCredential $SqlCredential -MinimumVersion 9
                } catch {
                    Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target "TCP:$instance" -Continue
                }

                # WmiComputer can be unreliable :( Use T-SQL
                $sql = "SELECT local_net_address,local_tcp_port FROM sys.dm_exec_connections WHERE session_id = @@SPID"
                $port = $server.Query($sql)

                [PsCustomObject]@{
                    ComputerName = $server.ComputerName
                    InstanceName = $server.ServiceName
                    SqlInstance  = $server.DomainInstanceName
                    IPAddress    = $port.local_net_address
                    Port         = $port.local_tcp_port
                    Static       = $true
                    Type         = "Normal"
                } | Select-DefaultView -Property ComputerName, InstanceName, SqlInstance, IPAddress, Port
            }
        }
    }
}

tools\dbatools\functions\Get-DbaTempdbUsage.ps1

function Get-DbaTempdbUsage {
    <#
    .SYNOPSIS
        Gets Tempdb usage for running queries.

    .DESCRIPTION
        This function queries DMVs for running sessions using tempdb and returns results if those sessions have user or internal space allocated or deallocated against them.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        If you want to use alternative credentials to connect to the server.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Tempdb, Space
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaTempdbUsage

    .EXAMPLE
        PS C:\> Get-DbaTempdbUsage -SqlInstance localhost\SQLDEV2K14

        Gets tempdb usage for localhost\SQLDEV2K14

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            if ($server.VersionMajor -le 9) {
                Stop-Function -Message "This function is only supported in SQL Server 2008 or higher." -Continue
            }

            $sql = "SELECT  SERVERPROPERTY('MachineName') AS ComputerName,
        ISNULL(SERVERPROPERTY('InstanceName'), 'MSSQLSERVER') AS InstanceName,
        SERVERPROPERTY('ServerName') AS SqlInstance,
        t.session_id AS Spid,
        r.command AS StatementCommand,
        SUBSTRING(   est.[text],
                     (r.statement_start_offset / 2) + 1,
                     ((CASE r.statement_end_offset
                            WHEN-1
                            THEN DATALENGTH(est.[text])
                            ELSE
                            r.statement_end_offset
                       END - r.statement_start_offset
                      ) / 2
                     ) + 1
                 ) AS QueryText,
        QUOTENAME(DB_NAME(r.database_id)) + N'.' + QUOTENAME(OBJECT_SCHEMA_NAME(est.objectid, est.dbid)) + N'.'
        + QUOTENAME(OBJECT_NAME(est.objectid, est.dbid)) AS ProcedureName,
        r.start_time AS StartTime,
        tdb.UserObjectAllocated * 8 AS CurrentUserAllocatedKB,
        (t.user_objects_alloc_page_count + tdb.UserObjectAllocated) * 8 AS TotalUserAllocatedKB,
        tdb.UserObjectDeallocated * 8 AS UserDeallocatedKB,
        (t.user_objects_dealloc_page_count + tdb.UserObjectDeallocated) * 8 AS TotalUserDeallocatedKB,
        tdb.InternalObjectAllocated * 8 AS InternalAllocatedKB,
        (t.internal_objects_alloc_page_count + tdb.InternalObjectAllocated) * 8 AS TotalInternalAllocatedKB,
        tdb.InternalObjectDeallocated * 8 AS InternalDeallocatedKB,
        (t.internal_objects_dealloc_page_count + tdb.InternalObjectDeallocated) * 8 AS TotalInternalDeallocatedKB,
        r.reads AS RequestedReads,
        r.writes AS RequestedWrites,
        r.logical_reads AS RequestedLogicalReads,
        r.cpu_time AS RequestedCPUTime,
        s.is_user_process AS IsUserProcess,
        s.[status] AS [Status],
        DB_NAME(r.database_id) AS [Database],
        s.login_name AS LoginName,
        s.original_login_name AS OriginalLoginName,
        s.nt_domain AS NTDomain,
        s.nt_user_name AS NTUserName,
        s.[host_name] AS HostName,
        s.[program_name] AS ProgramName,
        s.login_time AS LoginTime,
        s.last_request_start_time AS LastRequestedStartTime,
        s.last_request_end_time AS LastRequestedEndTime
FROM    sys.dm_db_session_space_usage AS t
INNER JOIN sys.dm_exec_sessions AS s
    ON s.session_id = t.session_id
LEFT JOIN sys.dm_exec_requests AS r
    ON r.session_id = s.session_id
LEFT JOIN
          (   SELECT    _tsu.session_id,
                        _tsu.request_id,
                        SUM(_tsu.user_objects_alloc_page_count)       AS UserObjectAllocated,
                        SUM(_tsu.user_objects_dealloc_page_count)     AS UserObjectDeallocated,
                        SUM(_tsu.internal_objects_alloc_page_count)   AS InternalObjectAllocated,
                        SUM(_tsu.internal_objects_dealloc_page_count) AS InternalObjectDeallocated
              FROM      tempdb.sys.dm_db_task_space_usage AS _tsu
              GROUP BY  _tsu.session_id,
                        _tsu.request_id
          ) AS tdb
    ON  tdb.session_id = r.session_id
   AND  tdb.request_id = r.request_id
OUTER APPLY sys.dm_exec_sql_text(r.[sql_handle]) AS est
WHERE   t.session_id != @@SPID
  AND   (tdb.UserObjectAllocated - tdb.UserObjectDeallocated + tdb.InternalObjectAllocated - tdb.InternalObjectDeallocated) != 0
OPTION (RECOMPILE);"

            $server.Query($sql)
        }
    }
}

tools\dbatools\functions\Get-DbatoolsLog.ps1

function Get-DbatoolsLog {
    <#
    .SYNOPSIS
        Returns log entries for dbatools

    .DESCRIPTION
        Returns log entries for dbatools. Handy when debugging or developing a script using it.

    .PARAMETER FunctionName
        Default: "*"
        Only messages written by similar functions will be returned.

    .PARAMETER ModuleName
        Default: "*"
        Only messages written by commands from similar modules will be returned.

    .PARAMETER Target
        Only messags handling the specified target will be returned.

    .PARAMETER Tag
        Only messages containing one of these tags will be returned.

    .PARAMETER Last
        Only messages written by the last X executions will be returned.
        Uses Get-History to determine execution. Ignores Get-message commands.
        By default, this will also include messages from other runspaces. If your command executes in parallel, that's useful.
        If it doesn't and you were offloading executions to other runspaces, consider also filtering by runspace using '-Runspace'

    .PARAMETER Skip
        How many executions to skip when specifying '-Last'.
        Has no effect without the '-Last' parameter.

    .PARAMETER Raw
        By default, messages such as SQL statements are flattened. Use raw to see the output without flattened formatting.

    .PARAMETER Runspace
        The guid of the runspace to return messages from.
        By default, messages from all runspaces are returned.
        Run the following line to see the list of guids:

        Get-Runspace | ft Id, Name, InstanceId -Autosize

    .PARAMETER Level
        Limit the message selection by level.
        Message levels have a numeric value, making it easier to select a range:

        -Level (1..6)

        Will select the first 6 levels (Critical - SomewhatVerbose).

    .PARAMETER Errors
        Instead of log entries, the error entries will be retrieved

    .NOTES
        Tags: Debug
        Author: Friedrich Weinmann (@FredWeinmann)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbatoolsLog

    .EXAMPLE
        PS C:\> Get-DbatoolsLog

        Returns all log entries currently in memory.

    .EXAMPLE
        PS C:\> Get-DbatoolsLog -Target "a" -Last 1 -Skip 1

        Returns all log entries that targeted the object "a" in the second last execution sent.

    .EXAMPLE
        PS C:\> Get-DbatoolsLog -Tag "fail" -Last 5

        Returns all log entries within the last 5 executions that contained the tag "fail"

    #>
    [CmdletBinding()]
    param (
        [string]$FunctionName = "*",
        [string]$ModuleName = "*",
        [AllowNull()]
        [object]$Target,
        [string[]]$Tag,
        [int]$Last,
        [int]$Skip = 0,
        [guid]$Runspace,
        [Sqlcollaborative.Dbatools.Message.MessageLevel[]]$Level,
        [switch]$Raw,
        [switch]$Errors
    )
    process {
        if ($Errors) {
            $messages = [Sqlcollaborative.Dbatools.Message.LogHost]::GetErrors() | Where-Object {
                ($_.FunctionName -like $FunctionName) -and ($_.ModuleName -like $ModuleName)
            }
        } else {
            $messages = [Sqlcollaborative.Dbatools.Message.LogHost]::GetLog() | Where-Object {
                ($_.FunctionName -like $FunctionName) -and ($_.ModuleName -like $ModuleName)
            }
        }

        if (Test-Bound -ParameterName Target) {
            $messages = $messages | Where-Object TargetObject -eq $Target
        }

        if (Test-Bound -ParameterName Tag) {
            $messages = $messages | Where-Object {
                $_.Tags | Where-Object {
                    $_ -in $Tag
                }
            }
        }

        if (Test-Bound -ParameterName Runspace) {
            $messages = $messages | Where-Object Runspace -eq $Runspace
        }

        if (Test-Bound -ParameterName Last) {
            $history = Get-History | Where-Object CommandLine -NotLike "Get-DbatoolsLog*" | Select-Object -Last $Last -Skip $Skip
            $start = $history[0].StartExecutionTime
            $end = $history[-1].EndExecutionTime

            $messages = $messages | Where-Object {
                ($_.Timestamp -gt $start) -and ($_.Timestamp -lt $end) -and ($_.Runspace -eq ([System.Management.Automation.Runspaces.Runspace]::DefaultRunspace.InstanceId))
            }
        }

        if (Test-Bound -ParameterName Level) {
            $messages = $messages | Where-Object Level -In $Level
        }

        if ($Raw) {
            return $messages
        } else {
            $messages | Select-Object -Property CallStack, ComputerName, File, FunctionName, Level, Line, @{
                Name       = "Message"
                Expression = {
                    $msg = ($_.Message.Split("`n") -join " ")
                    do {
                        $msg = $msg.Replace('  ', ' ')
                    } until ($msg -notmatch '  ')
                    $msg
                }
            }, ModuleName, Runspace, Tags, TargetObject, Timestamp, Type, Username
        }
    }
}

tools\dbatools\functions\Get-DbaTopResourceUsage.ps1

function Get-DbaTopResourceUsage {
    <#
    .SYNOPSIS
        Returns the top 20 resource consumers for cached queries based on four different metrics: duration, frequency, IO, and CPU.

    .DESCRIPTION
        Returns the top 20 resource consumers for cached queries based on four different metrics: duration, frequency, IO, and CPU.

        This command is based off of queries provided by Michael J. Swart at http://michaeljswart.com/go/Top20

        Per Michael: "I've posted queries like this before, and others have written many other versions of this query. All these queries are based on sys.dm_exec_query_stats."

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto-populated from the server

    .PARAMETER ExcludeSystem
        This will exclude system objects like replication procedures from being returned.

    .PARAMETER Type
        By default, all Types run but you can specify one or more of the following: Duration, Frequency, IO, or CPU

    .PARAMETER Limit
        By default, these query the Top 20 worst offenders (though more than 20 results can be returned if each of the top 20 have more than 1 subsequent result)

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Query, Performance
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaTopResourceUsage

    .EXAMPLE
        PS C:\> Get-DbaTopResourceUsage -SqlInstance sql2008, sql2012

        Return the 80 (20 x 4 types) top usage results by duration, frequency, IO, and CPU servers for servers sql2008 and sql2012

    .EXAMPLE
        PS C:\> Get-DbaTopResourceUsage -SqlInstance sql2008 -Type Duration, Frequency -Database TestDB

        Return the highest usage by duration (top 20) and frequency (top 20) for the TestDB on sql2008

    .EXAMPLE
        PS C:\> Get-DbaTopResourceUsage -SqlInstance sql2016 -Limit 30

        Return the highest usage by duration (top 30) and frequency (top 30) for the TestDB on sql2016

    .EXAMPLE
        PS C:\> Get-DbaTopResourceUsage -SqlInstance sql2008, sql2012 -ExcludeSystem

        Return the 80 (20 x 4 types) top usage results by duration, frequency, IO, and CPU servers for servers sql2008 and sql2012 without any System Objects

    .EXAMPLE
        PS C:\> Get-DbaTopResourceUsage -SqlInstance sql2016| Select-Object *

        Return all the columns plus the QueryPlan column

    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "SqlServers")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [ValidateSet("All", "Duration", "Frequency", "IO", "CPU")]
        [string[]]$Type = "All",
        [int]$Limit = 20,
        [Alias('Silent')]
        [switch]$EnableException,
        [switch]$ExcludeSystem
    )

    begin {

        $instancecolumns = " SERVERPROPERTY('MachineName') AS ComputerName,
        ISNULL(SERVERPROPERTY('InstanceName'), 'MSSQLSERVER') AS InstanceName,
        SERVERPROPERTY('ServerName') AS SqlInstance, "

        if ($database) {
            $wheredb = " and coalesce(db_name(st.dbid), db_name(cast(pa.value AS INT)), 'Resource') in ('$($database -join '', '')')"
        }

        if ($ExcludeDatabase) {
            $wherenotdb = " and coalesce(db_name(st.dbid), db_name(cast(pa.value AS INT)), 'Resource') notin '$($excludedatabase -join '', '')'"
        }

        if ($ExcludeSystem) {
            $whereexcludesystem = " AND coalesce(object_name(st.objectid, st.dbid), '<none>') NOT LIKE 'sp_MS%' "
        }
        $duration = ";with long_queries as
                        (
                            select top $Limit
                                query_hash,
                                sum(total_elapsed_time) elapsed_time
                            from sys.dm_exec_query_stats
                            where query_hash <> 0x0
                            group by query_hash
                            order by sum(total_elapsed_time) desc
                        )
                        select $instancecolumns
                            coalesce(db_name(st.dbid), db_name(cast(pa.value AS INT)), 'Resource') AS [Database],
                            coalesce(object_name(st.objectid, st.dbid), '<none>') as ObjectName,
                            qs.query_hash as QueryHash,
                            qs.total_elapsed_time / 1000 as TotalElapsedTimeMs,
                            qs.execution_count as ExecutionCount,
                            cast((total_elapsed_time / 1000) / (execution_count + 0.0) as money) as AverageDurationMs,
                            lq.elapsed_time / 1000 as QueryTotalElapsedTimeMs,
                            SUBSTRING(st.TEXT,(qs.statement_start_offset + 2) / 2,
                                (CASE
                                    WHEN qs.statement_end_offset = -1  THEN LEN(CONVERT(NVARCHAR(MAX),st.text)) * 2
                                    ELSE qs.statement_end_offset
                                    END - qs.statement_start_offset) / 2) as QueryText,
                            qp.query_plan as QueryPlan
                        from sys.dm_exec_query_stats qs
                        join long_queries lq
                            on lq.query_hash = qs.query_hash
                        cross apply sys.dm_exec_sql_text(qs.sql_handle) st
                        cross apply sys.dm_exec_query_plan (qs.plan_handle) qp
                        outer apply sys.dm_exec_plan_attributes(qs.plan_handle) pa
                        where pa.attribute = 'dbid' $wheredb $wherenotdb $whereexcludesystem
                        order by lq.elapsed_time desc,
                            lq.query_hash,
                            qs.total_elapsed_time desc
                        option (recompile)"

        $frequency = ";with frequent_queries as
                        (
                            select top $Limit
                                query_hash,
                                sum(execution_count) executions
                            from sys.dm_exec_query_stats
                            where query_hash <> 0x0
                            group by query_hash
                            order by sum(execution_count) desc
                        )
                        select $instancecolumns
                            coalesce(db_name(st.dbid), db_name(cast(pa.value AS INT)), 'Resource') AS [Database],
                            coalesce(object_name(st.objectid, st.dbid), '<none>') as ObjectName,
                            qs.query_hash as QueryHash,
                            qs.execution_count as ExecutionCount,
                            executions as QueryTotalExecutions,
                            SUBSTRING(st.TEXT,(qs.statement_start_offset + 2) / 2,
                                (CASE
                                    WHEN qs.statement_end_offset = -1  THEN LEN(CONVERT(NVARCHAR(MAX),st.text)) * 2
                                    ELSE qs.statement_end_offset
                                    END - qs.statement_start_offset) / 2) as QueryText,
                            qp.query_plan as QueryPlan
                        from sys.dm_exec_query_stats qs
                        join frequent_queries fq
                            on fq.query_hash = qs.query_hash
                        cross apply sys.dm_exec_sql_text(qs.sql_handle) st
                        cross apply sys.dm_exec_query_plan (qs.plan_handle) qp
                        outer apply sys.dm_exec_plan_attributes(qs.plan_handle) pa
                        where pa.attribute = 'dbid'  $wheredb $wherenotdb $whereexcludesystem
                        order by fq.executions desc,
                            fq.query_hash,
                            qs.execution_count desc
                        option (recompile)"

        $io = ";with high_io_queries as
                (
                    select top $Limit
                        query_hash,
                        sum(total_logical_reads + total_logical_writes) io
                    from sys.dm_exec_query_stats
                    where query_hash <> 0x0
                    group by query_hash
                    order by sum(total_logical_reads + total_logical_writes) desc
                )
                select $instancecolumns
                    coalesce(db_name(st.dbid), db_name(cast(pa.value AS INT)), 'Resource') AS [Database],
                    coalesce(object_name(st.objectid, st.dbid), '<none>') as ObjectName,
                    qs.query_hash as QueryHash,
                    qs.total_logical_reads + total_logical_writes as TotalIO,
                    qs.execution_count as ExecutionCount,
                    cast((total_logical_reads + total_logical_writes) / (execution_count + 0.0) as money) as AverageIO,
                    io as QueryTotalIO,
                    SUBSTRING(st.TEXT,(qs.statement_start_offset + 2) / 2,
                        (CASE
                            WHEN qs.statement_end_offset = -1  THEN LEN(CONVERT(NVARCHAR(MAX),st.text)) * 2
                            ELSE qs.statement_end_offset
                            END - qs.statement_start_offset) / 2) as QueryText,
                    qp.query_plan as QueryPlan
                from sys.dm_exec_query_stats qs
                join high_io_queries fq
                    on fq.query_hash = qs.query_hash
                cross apply sys.dm_exec_sql_text(qs.sql_handle) st
                cross apply sys.dm_exec_query_plan (qs.plan_handle) qp
                outer apply sys.dm_exec_plan_attributes(qs.plan_handle) pa
                where pa.attribute = 'dbid' $wheredb $wherenotdb $whereexcludesystem
                order by fq.io desc,
                    fq.query_hash,
                    qs.total_logical_reads + total_logical_writes desc
                option (recompile)"

        $cpu = ";with high_cpu_queries as
                (
                    select top $Limit
                        query_hash,
                        sum(total_worker_time) cpuTime
                    from sys.dm_exec_query_stats
                    where query_hash <> 0x0
                    group by query_hash
                    order by sum(total_worker_time) desc
                )
                select $instancecolumns
                    coalesce(db_name(st.dbid), db_name(cast(pa.value AS INT)), 'Resource') AS [Database],
                    coalesce(object_name(st.objectid, st.dbid), '<none>') as ObjectName,
                    qs.query_hash as QueryHash,
                    qs.total_worker_time as CpuTime,
                    qs.execution_count as ExecutionCount,
                    cast(total_worker_time / (execution_count + 0.0) as money) as AverageCpuMs,
                    cpuTime as QueryTotalCpu,
                    SUBSTRING(st.TEXT,(qs.statement_start_offset + 2) / 2,
                        (CASE
                            WHEN qs.statement_end_offset = -1  THEN LEN(CONVERT(NVARCHAR(MAX),st.text)) * 2
                            ELSE qs.statement_end_offset
                            END - qs.statement_start_offset) / 2) as QueryText,
                    qp.query_plan as QueryPlan
                from sys.dm_exec_query_stats qs
                join high_cpu_queries hcq
                    on hcq.query_hash = qs.query_hash
                cross apply sys.dm_exec_sql_text(qs.sql_handle) st
                cross apply sys.dm_exec_query_plan (qs.plan_handle) qp
                outer apply sys.dm_exec_plan_attributes(qs.plan_handle) pa
                where pa.attribute = 'dbid' $wheredb $wherenotdb $whereexcludesystem
                order by hcq.cpuTime desc,
                    hcq.query_hash,
                    qs.total_worker_time desc
                option (recompile)"
    }

    process {
        foreach ($instance in $SqlInstance) {

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 10
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }
            if ($server.ConnectionContext.StatementTimeout -ne 0) {
                $server.ConnectionContext.StatementTimeout = 0
            }

            if ($Type -in "All", "Duration") {
                try {
                    Write-Message -Level Debug -Message "Executing SQL: $duration"
                    $server.Query($duration) | Select-DefaultView -ExcludeProperty QueryPlan
                } catch {
                    Stop-Function -Message "Failure executing query for duration." -ErrorRecord $_ -Target $server -Continue
                }
            }

            if ($Type -in "All", "Frequency") {
                try {
                    Write-Message -Level Debug -Message "Executing SQL: $frequency"
                    $server.Query($frequency) | Select-DefaultView -ExcludeProperty QueryPlan
                } catch {
                    Stop-Function -Message "Failure executing query for frequency." -ErrorRecord $_ -Target $server -Continue
                }
            }

            if ($Type -in "All", "IO") {
                try {
                    Write-Message -Level Debug -Message "Executing SQL: $io"
                    $server.Query($io) | Select-DefaultView -ExcludeProperty QueryPlan
                } catch {
                    Stop-Function -Message "Failure executing query for IO." -ErrorRecord $_ -Target $server -Continue
                }
            }

            if ($Type -in "All", "CPU") {
                try {
                    Write-Message -Level Debug -Message "Executing SQL: $cpu"
                    $server.Query($cpu) | Select-DefaultView -ExcludeProperty QueryPlan
                } catch {
                    Stop-Function -Message "Failure executing query for CPU." -ErrorRecord $_ -Target $server -Continue
                }
            }
        }
    }
}

tools\dbatools\functions\Get-DbaTrace.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaTrace {
    <#
    .SYNOPSIS
        Gets a list of trace(s) from specified SQL Server Instance

    .DESCRIPTION
        This function returns a list of traces on a SQL Server instance and identifies the default trace file

    .PARAMETER SqlInstance
        The target SQL Server instance or instances

    .PARAMETER SqlCredential
        A credential to use to connect to the SQL Instance rather than using Windows Authentication

    .PARAMETER Id
        The id(s) of the Trace

    .PARAMETER Default
        Switch that will only return the information for the default system trace

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Security, Trace
        Author: Garry Bargsley (@gbargsley), http://blog.garrybargsley.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Get-DbaTrace -SqlInstance sql2016

        Lists all the trace files on the sql2016 SQL Server.

    .EXAMPLE
        PS C:\> Get-DbaTrace -SqlInstance sql2016 -Default

        Lists the default trace information on the sql2016 SQL Server.

    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [int[]]$Id,
        [switch]$Default,
        [switch][Alias('Silent')]
        $EnableException
    )
    begin {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias Get-DbaTraceFile

        # A Microsoft.SqlServer.Management.Trace.TraceServer class exists but is buggy
        # and requires x86 PowerShell. So we'll go with T-SQL.
        $sql = "SELECT id, status, path, max_size, stop_time, max_files, is_rowset, is_rollover, is_shutdown, is_default, buffer_count, buffer_size, file_position, reader_spid, start_time, last_event_time, event_count, dropped_event_count FROM sys.traces"

        if ($Id) {
            $idstring = $Id -join ","
            $sql = "$sql WHERE id in ($idstring)"
        }
    }
    process {
        foreach ($instance in $SqlInstance) {

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
                return
            }

            try {
                $results = $server.Query($sql)
            } catch {
                Stop-Function -Message "Issue collecting trace data on $server" -Target $server -ErrorRecord $_
            }

            if ($Default) {
                $results = $results | Where-Object { $_.is_default }
            }

            foreach ($row in $results) {
                if ($row.Path.ToString().Length -gt 0) {
                    $remotefile = Join-AdminUnc -servername $server.ComputerName -filepath $row.path
                } else {
                    $remotefile = $null
                }

                [PSCustomObject]@{
                    ComputerName      = $server.ComputerName
                    InstanceName      = $server.ServiceName
                    SqlInstance       = $server.DomainInstanceName
                    Id                = $row.id
                    Status            = $row.status
                    IsRunning         = ($row.status -eq 1)
                    Path              = $row.path
                    RemotePath        = $remotefile
                    MaxSize           = $row.max_size
                    StopTime          = $row.stop_time
                    MaxFiles          = $row.max_files
                    IsRowset          = $row.is_rowset
                    IsRollover        = $row.is_rollover
                    IsShutdown        = $row.is_shutdown
                    IsDefault         = $row.is_default
                    BufferCount       = $row.buffer_count
                    BufferSize        = $row.buffer_size
                    FilePosition      = $row.file_position
                    ReaderSpid        = $row.reader_spid
                    StartTime         = $row.start_time
                    LastEventTime     = $row.last_event_time
                    EventCount        = $row.event_count
                    DroppedEventCount = $row.dropped_event_count
                    Parent            = $server
                    SqlCredential     = $SqlCredential
                } | Select-DefaultView -ExcludeProperty Parent, RemotePath, RemoStatus, SqlCredential
            }
        }
    }
}

tools\dbatools\functions\Get-DbaTraceFlag.ps1

function Get-DbaTraceFlag {
    <#
    .SYNOPSIS
        Get global Trace Flag(s) information for each instance(s) of SQL Server.

    .DESCRIPTION
        Returns Trace Flags that are enabled globally on each instance(s) of SQL Server as an object.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER TraceFlag
        Use this switch to filter to a specific Trace Flag.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: TraceFlag
        Author: Kevin Bullen (@sqlpadawan)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        References:  https://docs.microsoft.com/en-us/sql/t-sql/database-console-commands/dbcc-traceon-trace-flags-transact-sql

    .LINK
        https://dbatools.io/Get-DbaTraceFlag

    .EXAMPLE
        PS C:\> Get-DbaTraceFlag -SqlInstance localhost

        Returns all Trace Flag information on the local default SQL Server instance

    .EXAMPLE
        PS C:\> Get-DbaTraceFlag -SqlInstance localhost, sql2016

        Returns all Trace Flag(s) for the local and sql2016 SQL Server instances

    .EXAMPLE
        PS C:\> Get-DbaTraceFlag -SqlInstance localhost -TraceFlag 4199,3205

        Returns Trace Flag status for TF 4199 and 3205 for the local SQL Server instance if they are enabled.

    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]
        $SqlCredential,
        [int[]]$TraceFlag,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $tflags = $server.EnumActiveGlobalTraceFlags()

            if ($tFlags.Rows.Count -eq 0) {
                Write-Message -Level Output -Message "No global trace flags enabled"
                return
            }

            if ($TraceFlag) {
                $tflags = $tflags | Where-Object TraceFlag -In $TraceFlag
            }

            foreach ($tflag in $tflags) {
                [pscustomobject]@{
                    ComputerName = $server.ComputerName
                    InstanceName = $server.ServiceName
                    SqlInstance  = $server.DomainInstanceName
                    TraceFlag    = $tflag.TraceFlag
                    Global       = $tflag.Global
                    Session      = $tflag.Session
                    Status       = $tflag.Status
                } | Select-DefaultView -ExcludeProperty 'Session'
            }
        }
    }
}

tools\dbatools\functions\Get-DbaUptime.ps1

function Get-DbaUptime {
    <#
    .SYNOPSIS
        Returns the uptime of the SQL Server instance, and if required the hosting windows server

    .DESCRIPTION
        By default, this command returns for each SQL Server instance passed in:
        SQL Instance last startup time, Uptime as a PS TimeSpan, Uptime as a formatted string
        Hosting Windows server last startup time, Uptime as a PS TimeSpan, Uptime as a formatted string

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Allows you to login to servers using SQL Logins instead of Windows Authentication (AKA Integrated or Trusted). To use:

        $scred = Get-Credential, then pass $scred object to the -SqlCredential parameter.

        Windows Authentication will be used if SqlCredential is not specified. SQL Server does not accept Windows credentials being passed as credentials.

        To connect to SQL Server as a different Windows user, run PowerShell as that user.

    .PARAMETER Credential
        Allows you to login to the computer (not SQL Server instance) using alternative Windows credentials.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: CIM
        Author: Stuart Moore (@napalmgram), stuart-moore.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaUptime

    .EXAMPLE
        PS C:\> Get-DbaUptime -SqlInstance SqlBox1\Instance2

        Returns an object with SQL Server start time, uptime as TimeSpan object, uptime as a string, and Windows host boot time, host uptime as TimeSpan objects and host uptime as a string for the sqlexpress instance on winserver

    .EXAMPLE
        PS C:\> Get-DbaUptime -SqlInstance winserver\sqlexpress, sql2016

        Returns an object with SQL Server start time, uptime as TimeSpan object, uptime as a string, and Windows host boot time, host uptime as TimeSpan objects and host uptime as a string for the sqlexpress instance on host winserver  and the default instance on host sql2016

    .EXAMPLE
        PS C:\> Get-DbaCmsRegServer -SqlInstance sql2014 | Get-DbaUptime

        Returns an object with SQL Server start time, uptime as TimeSpan object, uptime as a string, and Windows host boot time, host uptime as TimeSpan objects and host uptime as a string for every server listed in the Central Management Server on sql2014

    #>
    [CmdletBinding(DefaultParameterSetName = "Default")]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "ComputerName")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [PSCredential]$Credential,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        $nowutc = (Get-Date).ToUniversalTime()
    }
    process {
        # uses cim commands
        
        
        foreach ($instance in $SqlInstance) {
            if ($instance.Gettype().FullName -eq [System.Management.Automation.PSCustomObject] ) {
                $servername = $instance.SqlInstance
            } elseif ($instance.Gettype().FullName -eq [Microsoft.SqlServer.Management.Smo.Server]) {
                $servername = $instance.ComputerName
            } else {
                $servername = $instance.ComputerName;
            }

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }
            Write-Message -Level Verbose -Message "Getting start times for $servername"
            #Get tempdb creation date
            [dbadatetime]$SQLStartTime = $server.Databases["tempdb"].CreateDate
            $SQLUptime = New-TimeSpan -Start $SQLStartTime.ToUniversalTime() -End $nowutc
            $SQLUptimeString = "{0} days {1} hours {2} minutes {3} seconds" -f $($SQLUptime.Days), $($SQLUptime.Hours), $($SQLUptime.Minutes), $($SQLUptime.Seconds)

            $WindowsServerName = (Resolve-DbaNetworkName $servername -Credential $Credential).FullComputerName

            try {
                Write-Message -Level Verbose -Message "Getting WinBootTime via CimInstance for $servername"
                $WinBootTime = (Get-DbaOperatingSystem -ComputerName $windowsServerName -Credential $Credential -ErrorAction SilentlyContinue).LastBootTime
                $WindowsUptime = New-TimeSpan -start $WinBootTime.ToUniversalTime() -end $nowutc
                $WindowsUptimeString = "{0} days {1} hours {2} minutes {3} seconds" -f $($WindowsUptime.Days), $($WindowsUptime.Hours), $($WindowsUptime.Minutes), $($WindowsUptime.Seconds)
            } catch {
                try {
                    Write-Message -Level Verbose -Message "Getting WinBootTime via CimInstance DCOM"
                    $CimOption = New-CimSessionOption -Protocol DCOM
                    $CimSession = New-CimSession -Credential:$Credential -ComputerName $WindowsServerName -SessionOption $CimOption
                    [dbadatetime]$WinBootTime = ($CimSession | Get-CimInstance -ClassName Win32_OperatingSystem).LastBootUpTime
                    $WindowsUptime = New-TimeSpan -start $WinBootTime.ToUniversalTime() -end $nowutc
                    $WindowsUptimeString = "{0} days {1} hours {2} minutes {3} seconds" -f $($WindowsUptime.Days), $($WindowsUptime.Hours), $($WindowsUptime.Minutes), $($WindowsUptime.Seconds)
                } catch {
                    Stop-Function -Message "Failure getting WinBootTime" -ErrorRecord $_ -Target $instance -Continue
                }
            }

            [PSCustomObject]@{
                ComputerName     = $WindowsServerName
                InstanceName     = $server.ServiceName
                SqlServer        = $server.Name
                SqlUptime        = $SQLUptime
                WindowsUptime    = $WindowsUptime
                SqlStartTime     = $SQLStartTime
                WindowsBootTime  = $WinBootTime
                SinceSqlStart    = $SQLUptimeString
                SinceWindowsBoot = $WindowsUptimeString
            }
        }
    }
}

tools\dbatools\functions\Get-DbaUserPermission.ps1

function Get-DbaUserPermission {
    <#
    .SYNOPSIS
        Displays detailed permissions information for the server and database roles and securables.

    .DESCRIPTION
        This command will display all server logins, server level securable, database logins and database securables.

        DISA STIG implementators will find this command useful as it uses Permissions.sql provided by DISA.

        Note that if you Ctrl-C out of this command and end it prematurely, it will leave behind a STIG schema in tempdb.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto-populated from the server

    .PARAMETER ExcludeSystemDatabase
        Allows you to suppress output on system databases

    .PARAMETER IncludePublicGuest
        Allows you to include output for public and guest grants.

    .PARAMETER IncludeSystemObjects
        Allows you to include output on sys schema objects.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Discovery, Permissions, Security
        Author: Brandon Abshire, netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaUserPermission

    .EXAMPLE
        PS C:\> Get-DbaUserPermission -SqlInstance sql2008, sqlserver2012

        Check server and database permissions for servers sql2008 and sqlserver2012.

    .EXAMPLE
        PS C:\> Get-DbaUserPermission -SqlInstance sql2008 -Database TestDB

        Check server and database permissions on server sql2008 for only the TestDB database

    .EXAMPLE
        PS C:\> Get-DbaUserPermission -SqlInstance sql2008 -Database TestDB -IncludePublicGuest -IncludeSystemObjects

        Check server and database permissions on server sql2008 for only the TestDB database,
        including public and guest grants, and sys schema objects.

    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "SqlServers")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [parameter(Position = 1)]
        [switch]$ExcludeSystemDatabase,
        [switch]$IncludePublicGuest,
        [switch]$IncludeSystemObjects,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {

        $sql = [System.IO.File]::ReadAllText("$script:PSModuleRoot\bin\stig.sql")

        $endSQL = "	   BEGIN TRY DROP FUNCTION STIG.server_effective_permissions END TRY BEGIN CATCH END CATCH;
                       GO
                       BEGIN TRY DROP VIEW STIG.server_permissions END TRY BEGIN CATCH END CATCH;
                       GO
                       BEGIN TRY DROP FUNCTION STIG.members_of_server_role END TRY BEGIN CATCH END CATCH;
                       GO
                       BEGIN TRY DROP FUNCTION STIG.server_roles_of END TRY BEGIN CATCH END CATCH;
                       GO
                       BEGIN TRY DROP VIEW STIG.server_role_members END TRY BEGIN CATCH END CATCH;
                       GO
                       BEGIN TRY DROP FUNCTION STIG.database_effective_permissions END TRY BEGIN CATCH END CATCH;
                       GO
                       BEGIN TRY DROP VIEW STIG.database_permissions END TRY BEGIN CATCH END CATCH;
                       GO
                       BEGIN TRY DROP FUNCTION STIG.members_of_db_role END TRY BEGIN CATCH END CATCH;
                       GO
                       BEGIN TRY DROP FUNCTION STIG.database_roles_of END TRY BEGIN CATCH END CATCH;
                       GO
                       BEGIN TRY DROP VIEW STIG.database_role_members END TRY BEGIN CATCH END CATCH;
                       GO
                       BEGIN TRY DROP SCHEMA STIG END TRY BEGIN CATCH END CATCH;
                       GO"


        $serverSQL = "SELECT  'SERVER LOGINS' AS Type ,
                                    sl.name AS Member ,
                                    ISNULL(srm.role, 'None') AS [Role/Securable/Class] ,
                                    ' ' AS [Schema/Owner] ,
                                    ' ' AS [Securable] ,
                                    ' ' AS [Grantee Type] ,
                                    ' ' AS [Grantee] ,
                                    ' ' AS [Permission] ,
                                    ' ' AS [State] ,
                                    ' ' AS [Grantor] ,
                                    ' ' AS [Grantor Type] ,
                                    ' ' AS [Source View]
                            FROM    master.sys.syslogins sl
                                    LEFT JOIN tempdb.[STIG].[server_role_members] srm ON sl.name = srm.member
                            WHERE   sl.name NOT LIKE 'NT %'
                                    AND sl.name NOT LIKE '##%'
                            UNION
                            SELECT  'SERVER SECURABLES' AS Type ,
                                    sl.name ,
                                    sp.[Securable Class] COLLATE SQL_Latin1_General_CP1_CI_AS ,
                                    ' ' ,
                                    sp.[Securable] ,
                                    sp.[Grantee Type] COLLATE SQL_Latin1_General_CP1_CI_AS ,
                                    sp.Grantee ,
                                    sp.Permission COLLATE SQL_Latin1_General_CP1_CI_AS ,
                                    sp.State COLLATE SQL_Latin1_General_CP1_CI_AS ,
                                    sp.Grantor ,
                                    sp.[Grantor Type] COLLATE SQL_Latin1_General_CP1_CI_AS ,
                                    sp.[Source View]
                            FROM    master.sys.syslogins sl
                                    LEFT JOIN tempdb.[STIG].[server_permissions] sp ON sl.name = sp.Grantee
                            WHERE   sl.name NOT LIKE 'NT %'
                                    AND sl.name NOT LIKE '##%';"

        $dbSQL = "SELECT  'DB ROLE MEMBERS' AS type ,
                                Member ,
                                Role ,
                                ' ' AS [Schema/Owner] ,
                                ' ' AS [Securable] ,
                                ' ' AS [Grantee Type] ,
                                ' ' AS [Grantee] ,
                                ' ' AS [Permission] ,
                                ' ' AS [State] ,
                                ' ' AS [Grantor] ,
                                ' ' AS [Grantor Type] ,
                                ' ' AS [Source View]
                        FROM    tempdb.[STIG].[database_role_members]
                        UNION
                        SELECT DISTINCT
                                'DB SECURABLES' AS Type ,
                                drm.member ,
                                dp.[Securable Type or Class] COLLATE SQL_Latin1_General_CP1_CI_AS ,
                                dp.[Schema/Owner] ,
                                dp.Securable ,
                                dp.[Grantee Type] COLLATE SQL_Latin1_General_CP1_CI_AS ,
                                dp.Grantee ,
                                dp.Permission COLLATE SQL_Latin1_General_CP1_CI_AS ,
                                dp.State COLLATE SQL_Latin1_General_CP1_CI_AS ,
                                dp.Grantor ,
                                dp.[Grantor Type] COLLATE SQL_Latin1_General_CP1_CI_AS ,
                                dp.[Source View]
                        FROM    tempdb.[STIG].[database_role_members] drm
                                LEFT JOIN tempdb.[STIG].[database_permissions] dp ON ( drm.member = dp.grantee
                                                                                      OR drm.role = dp.grantee
                                                                                     )
                        WHERE	dp.Grantor IS NOT NULL
                                AND [Schema/Owner] <> 'sys'"

        if ($IncludePublicGuest) { $dbSQL = $dbSQL.Replace("LEFT JOIN", "FULL JOIN") }
        if ($IncludeSystemObjects) { $dbSQL = $dbSQL.Replace("AND [Schema/Owner] <> 'sys'", "") }

    }

    process {
        foreach ($instance in $SqlInstance) {

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 10
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $dbs = $server.Databases

            if ($Database) {
                $dbs = $dbs | Where-Object { $Database -contains $_.Name }
            }

            if ($ExcludeDatabase) {
                $dbs = $dbs | Where-Object Name -NotIn $ExcludeDatabase
            }

            if ($ExcludeSystemDatabase) {
                $dbs = $dbs | Where-Object IsSystemObject -eq $false
            }

            #reset $serverDT
            $serverDT = $null

            foreach ($db in $dbs) {
                Write-Message -Level Verbose -Message "Processing $db on $instance"

                if ($db.IsAccessible -eq $false) {
                    Stop-Function -Message "The database $db is not accessible" -Continue
                }

                $sql = $sql.Replace("<TARGETDB>", $db.Name)

                #Create objects in active database
                Write-Message -Level Verbose -Message "Creating objects"
                try {
                    $db.ExecuteNonQuery($sql)
                } catch {
                    # here to avoid an empty catch
                    $null = 1
                } # sometimes it complains about not being able to drop the stig schema if the person Ctrl-C'd before.

                #Grab permissions data
                if (-not $serverDT) {
                    Write-Message -Level Verbose -Message "Building data table for server objects"

                    try {
                        $serverDT = $db.Query($serverSQL)
                    } catch {
                        # here to avoid an empty catch
                        $null = 1
                    }

                    foreach ($row in $serverDT) {
                        [PSCustomObject]@{
                            ComputerName       = $server.ComputerName
                            InstanceName       = $server.ServiceName
                            SqlInstance        = $server.DomainInstanceName
                            Object             = 'SERVER'
                            Type               = $row.Type
                            Member             = $row.Member
                            RoleSecurableClass = $row.'Role/Securable/Class'
                            SchemaOwner        = $row.'Schema/Owner'
                            Securable          = $row.Securable
                            GranteeType        = $row.'Grantee Type'
                            Grantee            = $row.Grantee
                            Permission         = $row.Permission
                            State              = $row.State
                            Grantor            = $row.Grantor
                            GrantorType        = $row.'Grantor Type'
                            SourceView         = $row.'Source View'
                        }
                    }
                }

                Write-Message -Level Verbose -Message "Building data table for $db objects"
                try {
                    $dbDT = $db.Query($dbSQL)
                } catch {
                    # here to avoid an empty catch
                    $null = 1
                }

                foreach ($row in $dbDT) {
                    [PSCustomObject]@{
                        ComputerName       = $server.ComputerName
                        InstanceName       = $server.ServiceName
                        SqlInstance        = $server.DomainInstanceName
                        Object             = $db.Name
                        Type               = $row.Type
                        Member             = $row.Member
                        RoleSecurableClass = $row.'Role/Securable/Class'
                        SchemaOwner        = $row.'Schema/Owner'
                        Securable          = $row.Securable
                        GranteeType        = $row.'Grantee Type'
                        Grantee            = $row.Grantee
                        Permission         = $row.Permission
                        State              = $row.State
                        Grantor            = $row.Grantor
                        GrantorType        = $row.'Grantor Type'
                        SourceView         = $row.'Source View'
                    }
                }

                #Delete objects
                Write-Message -Level Verbose -Message "Deleting objects"
                try {
                    $db.ExecuteNonQuery($endSQL)
                } catch {
                    # here to avoid an empty catch
                    $null = 1
                }
                $sql = $sql.Replace($db.Name, "<TARGETDB>")

                #Sashay Away
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Get-DbaUserLevelPermission
    }
}

tools\dbatools\functions\Get-DbaWaitingTask.ps1

function Get-DbaWaitingTask {
    <#
    .SYNOPSIS
        Displays waiting task.

    .DESCRIPTION
        This command is based on waiting task T-SQL script published by Paul Randal.
        Reference: https://www.sqlskills.com/blogs/paul/updated-sys-dm_os_waiting_tasks-script-2/

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. Server version must be SQL Server version XXXX or higher.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Spid
        Find the waiting task of one or more specific process ids

    .PARAMETER IncludeSystemSpid
        If this switch is enabled, the output will include the system sessions.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Waits,Task,WaitTask
        Author: Shawn Melton (@wsmelton), https://wsmelton.github.io

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaWaitingTask

    .EXAMPLE
        PS C:\> Get-DbaWaitingTask -SqlInstance sqlserver2014a

        Returns the waiting task for all sessions on sqlserver2014a

    .EXAMPLE
        PS C:\> Get-DbaWaitingTask -SqlInstance sqlserver2014a -IncludeSystemSpid

        Returns the waiting task for all sessions (user and system) on sqlserver2014a

    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "SqlServers")]
        [DbaInstance[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [parameter(ValueFromPipelineByPropertyName = $true)]
        [object[]]$Spid,
        [switch]$IncludeSystemSpid,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        $sql = "
            SELECT
                [owt].[session_id] AS [Spid],
                [owt].[exec_context_id] AS [Thread],
                [ot].[scheduler_id] AS [Scheduler],
                [owt].[wait_duration_ms] AS [WaitMs],
                [owt].[wait_type] AS [WaitType],
                [owt].[blocking_session_id] AS [BlockingSpid],
                [owt].[resource_description] AS [ResourceDesc],
                CASE [owt].[wait_type]
                    WHEN N'CXPACKET' THEN
                        RIGHT ([owt].[resource_description],
                            CHARINDEX (N'=', REVERSE ([owt].[resource_description])) - 1)
                    ELSE NULL
                END AS [NodeId],
                [eqmg].[dop] AS [Dop],
                [er].[database_id] AS [DbId],
                [est].text AS [SqlText],
                [eqp].[query_plan] AS [QueryPlan],
                CAST ('https://www.sqlskills.com/help/waits/' + [owt].[wait_type] as XML) AS [URL]
            FROM sys.dm_os_waiting_tasks [owt]
            INNER JOIN sys.dm_os_tasks [ot] ON
                [owt].[waiting_task_address] = [ot].[task_address]
            INNER JOIN sys.dm_exec_sessions [es] ON
                [owt].[session_id] = [es].[session_id]
            INNER JOIN sys.dm_exec_requests [er] ON
                [es].[session_id] = [er].[session_id]
            FULL JOIN sys.dm_exec_query_memory_grants [eqmg] ON
                [owt].[session_id] = [eqmg].[session_id]
            OUTER APPLY sys.dm_exec_sql_text ([er].[sql_handle]) [est]
            OUTER APPLY sys.dm_exec_query_plan ([er].[plan_handle]) [eqp]
            WHERE
                [es].[is_user_process] = $(if (Test-Bound 'IncludeSystemSpid') {0} else {1})
            ORDER BY
                [owt].[session_id],
                [owt].[exec_context_id]
            OPTION(RECOMPILE);"
    }
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $results = $server.Query($sql)
            foreach ($row in $results) {
                if (Test-Bound 'Spid') {
                    if ($row.Spid -notin $Spid) { continue }
                }

                [PSCustomObject]@{
                    ComputerName = $server.ComputerName
                    InstanceName = $server.ServiceName
                    SqlInstance  = $server.DomainInstanceName
                    Spid         = $row.Spid
                    Thread       = $row.Thread
                    Scheduler    = $row.Scheduler
                    WaitMs       = $row.WaitMs
                    WaitType     = $row.WaitType
                    BlockingSpid = $row.BlockingSpid
                    ResourceDesc = $row.ResourceDesc
                    NodeId       = $row.NodeId
                    Dop          = $row.Dop
                    DbId         = $row.DbId
                    SqlText      = $row.SqlText
                    QueryPlan    = $row.QueryPlan
                    InfoUrl      = $row.InfoUrl
                } | Select-DefaultView -ExcludeProperty 'SqlText', 'QueryPlan', 'InfoUrl'
            }
        }
    }
}

tools\dbatools\functions\Get-DbaWaitResource.ps1

function Get-DbaWaitResource {
    <#
    .SYNOPSIS
        Returns the resource being waited upon

    .DESCRIPTION
        Given a wait resource in the form of 'PAGE: 10:1:9180084' returns the database, data file and the system object which is being waited up.

        Given a wait resource in the form of 'KEY: 7:35457594073541168 (de21f92a1572)', returns the database, object and index that is being waited on, With the -row switch the row data will also be returned.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Allows you to login to servers using SQL Logins as opposed to Windows Auth/Integrated/Trusted.

    .PARAMETER WaitResource
        The wait resource value as supplied in sys.dm_exec_requests

    .PARAMETER Row
        If this switch provided also returns the value of the row being waited on with KEY wait resources

    .PARAMETER EnableException
        Replaces user friendly yellow warnings with bloody red exceptions of doom!
        Use this if you want the function to throw terminating errors you want to catch.

    .NOTES
        Tags: Pages, DBCC
        Author: Stuart Moore (@napalmgram), stuart-moore.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaWaitResource

    .EXAMPLE
        PS C:\> Get-DbaWaitResource -SqlInstance server1 -WaitResource 'PAGE: 10:1:9180084'

        Will return an object containing; database name, data file name, schema name and the object which owns the resource

    .EXAMPLE
        PS C:\> Get-DbaWaitResource -SqlInstance server2 -WaitResource 'KEY: 7:35457594073541168 (de21f92a1572)'

        Will return an object containing; database name, schema name and index name which is being waited on.

    .EXAMPLE
        PS C:\> Get-DbaWaitResource -SqlInstance server2 -WaitResource 'KEY: 7:35457594073541168 (de21f92a1572)' -row

        Will return an object containing; database name, schema name and index name which is being waited on, and in addition the contents of the locked row at the time the command is run.

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstance]$SqlInstance,
        [PsCredential]$SqlCredential,
        [parameter(Mandatory, ValueFromPipeline)]
        [string]$WaitResource,
        [switch]$Row,
        [switch]$EnableException
    )

    process {
        if ($WaitResource -notmatch '^PAGE: [0-9]*:[0-9]*:[0-9]*$' -and $WaitResource -notmatch '^KEY: [0-9]*:[0-9]* \([a-f0-9]*\)$') {
            Stop-Function -Message "Row input - $WaitResource - Improperly formatted"
            return
        }

        try {
            $server = Connect-SqlInstance -SqlInstance $sqlinstance -SqlCredential $SqlCredential
        } catch {
            Write-Message -Level Warning -Message "Cannot connect to $SqlInstance"
        }

        $null = $WaitResource -match '^(?<Type>[A-Z]*): (?<dbid>[0-9]*):*'
        $ResourceType = $matches.Type
        $DbId = $matches.DbId
        $DbName = ($server.Databases | Where-Object ID -eq $dbid).Name
        if ($null -eq $DbName) {
            stop-function -Message "Database with id $dbid does not exist on $server"
            return
        }
        if ($ResourceType -eq 'PAGE') {
            $null = $WaitResource -match '^(?<Type>[A-Z]*): (?<dbid>[0-9]*):(?<FileID>[0-9]*):(?<PageID>[0-9]*)$'
            $DataFileSql = "select name, physical_name from sys.master_files where database_id=$DbID and file_ID=$($matches.FileID);"
            $DataFile = $server.query($DataFileSql)
            if ($null -eq $DataFile) {
                Write-Message -Level Warning -Message "Datafile with id $($matches.FileID) for $dbname not found"
                return
            }
            $ObjectIdSQL = "dbcc traceon (3604); dbcc page ($dbid,$($matches.fileID),$($matches.PageID),2) with tableresults;"
            try {
                $ObjectID = ($server.databases[$dbname].Query($ObjectIdSQL) | Where-Object Field -eq 'Metadata: ObjectId').Value
            } catch {
                Stop-Function -Message "You've requested a page beyond the end of the database, exiting"
                return
            }
            if ($null -eq $ObjectID) {
                Write-Message -Level Warning -Message "Object not found, could have been delete, or a transcription error when copying the Wait_resource to PowerShell"
                return
            }
            $ObjectSql = "select SCHEMA_NAME(schema_id) as SchemaName, name, type_desc from sys.all_objects where object_id=$objectID;"
            $Object = $server.databases[$dbname].query($ObjectSql)
            if ($null -eq $Object) {
                Write-Message -Warning "Object could not be found. Could have been removed, or could be a transcription error copying the Wait_resource to sowerShell"
            }
            [PsCustomObject]@{
                DatabaseID   = $DbId
                DatabaseName = $DbName
                DataFileName = $Datafile.name
                DataFilePath = $DataFile.physical_name
                ObjectID     = $ObjectID
                ObjectName   = $Object.Name
                ObjectSchema = $Object.SchemaName
                ObjectType   = $Object.type_desc
            }
        }
        if ($ResourceType -eq 'KEY') {
            $null = $WaitResource -match '^(?<Type>[A-Z]*): (?<dbid>[0-9]*):(?<frodo>[0-9]*) (?<physloc>\(.*\))$'
            $IndexSql = "select
                            sp.object_id as ObjectID,
                            OBJECT_SCHEMA_NAME(sp.object_id) as SchemaName,
                            sao.name as ObjectName,
                            si.name as IndexName
                        from
                            sys.partitions sp inner join sys.indexes si on sp.index_id=si.index_id and sp.object_id=si.object_id
                                inner join sys.all_objects sao on sp.object_id=sao.object_id
                        where
                            hobt_id = $($matches.frodo);
                "
            $Index = $server.databases[$dbname].Query($IndexSql)
            if ($null -eq $Index) {
                Write-Message -Level Warning -Message "Heap or B-Tree with ID $($matches.frodo) can not be found in $dbname on $server"
                return
            }
            $output = [PsCustomObject]@{
                DatabaseID   = $DbId
                DatabaseName = $DbName
                SchemaName   = $Index.SchemaName
                IndexName    = $Index.IndexName
                ObjectID     = $index.ObjectID
                Objectname   = $index.ObjectName
                HobtID       = $matches.frodo
            }
            if ($row -eq $True) {
                $DataSql = "select * from $($Index.SchemaName).$($Index.ObjectName) with (NOLOCK) where %%lockres%% ='$($matches.physloc)'"
                $Data = $server.databases[$dbname].query($DataSql)
                if ($null -eq $data) {
                    Write-Message -Level warning -Message "Could not retrieve the data. It may have been deleted or moved since the wait resource value was generated"
                } else {
                    $output | Add-Member -Type NoteProperty -Name ObjectData -Value $Data
                    $output | Select-Object * -ExpandProperty ObjectData
                }
            } else {
                $output
            }
        }
    }
}

tools\dbatools\functions\Get-DbaWaitStatistic.ps1

function Get-DbaWaitStatistic {
    <#
    .SYNOPSIS
        Displays wait statistics

    .DESCRIPTION
        This command is based off of Paul Randal's post "Wait statistics, or please tell me where it hurts"

        Returns:
        WaitType
        Category
        WaitSeconds
        ResourceSeconds
        SignalSeconds
        WaitCount
        Percentage
        AverageWaitSeconds
        AverageResourceSeconds
        AverageSignalSeconds
        URL

        Reference: https://www.sqlskills.com/blogs/paul/wait-statistics-or-please-tell-me-where-it-hurts/

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. Server version must be SQL Server version 2005 or higher.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Threshold
        Threshold, in percentage of all waits on the system. Default per Paul's post is 95%.

    .PARAMETER IncludeIgnorable
        Some waits are no big deal and can be safely ignored in most circumstances. If you've got weird issues with mirroring or AGs.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: WaitStatistic
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaWaitStatistic

    .EXAMPLE
        PS C:\> Get-DbaWaitStatistic -SqlInstance sql2008, sqlserver2012

        Check wait statistics for servers sql2008 and sqlserver2012

    .EXAMPLE
        PS C:\> Get-DbaWaitStatistic -SqlInstance sql2008 -Threshold 98 -IncludeIgnorable

        Check wait statistics on server sql2008 for thresholds above 98% and include wait stats that are most often, but not always, ignorable

    .EXAMPLE
        PS C:\> Get-DbaWaitStatistic -SqlInstance sql2008 | Select *

        Shows detailed notes, if available, from Paul's post

    .EXAMPLE
        PS C:\> $output = Get-DbaWaitStatistic -SqlInstance sql2008 -Threshold 100 -IncludeIgnorable | Select-Object * | ConvertTo-DbaDataTable

        Collects all Wait Statistics (including ignorable waits) on server sql2008 into a Data Table.

    .EXAMPLE
        PS C:\> $output = Get-DbaWaitStatistic -SqlInstance sql2008
        PS C:\> foreach ($row in ($output | Sort-Object -Unique Url)) { Start-Process ($row).Url }

        Displays the output then loads the associated sqlskills website for each result. Opens one tab per unique URL.

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "SqlServers")]
        [DbaInstance[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [int]$Threshold = 95,
        [switch]$IncludeIgnorable,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {

        $details = [pscustomobject]@{
            CXPACKET                         = "This indicates parallelism, not necessarily that there's a problem. The coordinator thread in a parallel query always accumulates these waits. If the parallel threads are not given equal amounts of work to do, or one thread blocks, the waiting threads will also accumulate CXPACKET waits, which will make them aggregate a lot faster - this is a problem. One thread may have a lot more to do than the others, and so the whole query is blocked while the long-running thread completes. If this is combined with a high number of PAGEIOLATCH_XX waits, it could be large parallel table scans going on because of incorrect non-clustered indexes, or a bad query plan. If neither of these are the issue, you might want to try setting MAXDOP to 4, 2, or 1 for the offending queries (or possibly the whole instance). Make sure that if you have a NUMA system that you try setting MAXDOP to the number of cores in a single NUMA node first to see if that helps the problem. You also need to consider the MAXDOP effect on a mixed-load system. Play with the cost threshold for parallelism setting (bump it up to, say, 25) before reducing the MAXDOP of the whole instance. And don't forget Resource Governor in Enterprise Edition of  SQL Server 2008 onward that allows DOP governing for a particular group of connections to the server."
            PAGEIOLATCH_XX                   = "This is where SQL Server is waiting for a data page to be read from disk into memory. It may indicate a bottleneck at the IO subsystem level (which is a common knee-jerk response to seeing these), but why is the I/O subsystem having to service so many reads? It could be buffer pool/memory pressure (i.e. not enough memory for the workload), a sudden change in query plans causing a large parallel scan instead of a seek, plan cache bloat, or a number of other things. Don't assume the root cause is the I/O subsystem."
            ASYNC_NETWORK_IO                 = "This is usually where SQL Server is waiting for a client to finish consuming data. It could be that the client has asked for a very large amount of data or just that it's consuming it reeeeeally slowly because of poor programming - I rarely see this being a network issue. Clients often process one row at a time - called RBAR or Row-By-Agonizing-Row - instead of caching the data on the client and acknowledging to SQL Server immediately."
            WRITELOG                         = "This is the log management system waiting for a log flush to disk. It commonly indicates that the I/O subsystem can't keep up with the log flush volume, but on very high-volume systems it could also be caused by internal log flush limits, that may mean you have to split your workload over multiple databases or even make your transactions a little longer to reduce log flushes. To be sure it is the I/O subsystem, use the DMV sys.dm_io_virtual_file_stats to examine the I/O latency for the log file and see if it correlates to the average WRITELOG time. If WRITELOG is longer, you've got internal contention and need to shard. If not, investigate why you're creating so much transaction log."
            BROKER_RECEIVE_WAITFOR           = "This is just Service Broker waiting around for new messages to receive. I would add this to the list of waits to filter out and re-run the wait stats query."
            MSQL_XP                          = "This is SQL Server waiting for an extended stored-proc to finish. This could indicate a problem in your XP code."
            OLEDB                            = "As its name suggests, this is a wait for something communicating using OLEDB - e.g. a linked server. However, OLEDB is also used by all DMVs and by DBCC CHECKDB, so don't assume linked servers are the problem - it could be a third-party monitoring tool making excessive DMV calls. If it *is* a linked server (wait times in the 10s or 100s of milliseconds), go to the linked server and do wait stats analysis there to figure out what the performance issue is there."
            BACKUPIO                         = "This can show up when you're backing up to a slow I/O subsystem, like directly to tape, which is slooooow, or over a network."
            LCK_M_XX                         = "This is simply the thread waiting for a lock to be granted and indicates blocking problems. These could be caused by unwanted lock escalation or bad programming, but could also be from I/Os taking a long time causing locks to be held for longer than usual. Look at the resource associated with the lock using the DMV sys.dm_os_waiting_tasks. Don't assume that locking is the root cause."
            ONDEMAND_TASK_QUEUE              = "This is normal and is part of the background task system (e.g. deferred drop, ghost cleanup).  I would add this to the list of waits to filter out and re-run the wait stats query."
            BACKUPBUFFER                     = "This commonly show up with BACKUPIO and is a backup thread waiting for a buffer to write backup data into."
            IO_COMPLETION                    = "This is SQL Server waiting for non-data page I/Os to complete and could be an indication that the I/O subsystem is overloaded if the latencies look high (see Are I/O latencies killing your performance?)"
            SOS_SCHEDULER_YIELD              = "This is code running that doesn't hit any resource waits."
            DBMIRROR_EVENTS_QUEUE            = "These two are database mirroring just sitting around waiting for something to do. I would add these to the list of waits to filter out and re-run the wait stats query."
            DBMIRRORING_CMD                  = "These two are database mirroring just sitting around waiting for something to do. I would add these to the list of waits to filter out and re-run the wait stats query."
            PAGELATCH_XX                     = "This is contention for access to in-memory copies of pages. The most well-known cases of these are the PFS and SGAM contention that can occur in tempdb under certain workloads. To find out what page the contention is on, you'll need to use the DMV sys.dm_os_waiting_tasks to figure out what page the latch is for. For tempdb issues, Robert Davis (blog | twitter) has a good post showing how to do this. Another common cause I've seen is an index hot-spot with concurrent inserts into an index with an identity value key."
            LATCH_XX                         = "This is contention for some non-page structure inside SQL Server - so not related to I/O or data at all. These can be hard to figure out and you're going to be using the DMV sys.dm_os_latch_stats. More on this in my Latches category."
            PREEMPTIVE_OS_PIPEOPS            = "This is SQL Server switching to preemptive scheduling mode to call out to Windows for something, and this particular wait is usually from using xp_cmdshell. These were added for 2008 and aren't documented anywhere except through the links to my waits library."
            THREADPOOL                       = "This says that there aren't enough worker threads on the system to satisfy demand. Commonly this is large numbers of high-DOP queries trying to execute and taking all the threads from the thread pool."
            BROKER_TRANSMITTER               = "This is just Service Broker waiting around for new messages to send. I would add this to the list of waits to filter out and re-run the wait stats query."
            SQLTRACE_WAIT_ENTRIES            = "Part of SQL Trace. I would add this to the list of waits to filter out and re-run the wait stats query."
            DBMIRROR_DBM_MUTEX               = "This one is undocumented and is contention for the send buffer that database mirroring shares between all the mirroring sessions on a server. It could indicate that you've got too many mirroring sessions."
            RESOURCE_SEMAPHORE               = "This is queries waiting for execution memory (the memory used to process the query operators - like a sort). This could be memory pressure or a very high concurrent workload."
            PREEMPTIVE_OS_AUTHENTICATIONOPS  = "These are SQL Server switching to preemptive scheduling mode to call out to Windows for something. These were added for 2008 and aren't documented anywhere except through the links to my waits library."
            PREEMPTIVE_OS_GENERICOPS         = "These are SQL Server switching to preemptive scheduling mode to call out to Windows for something. These were added for 2008 and aren't documented anywhere except through the links to my waits library."
            SLEEP_BPOOL_FLUSH                = "This is normal to see and indicates that checkpoint is throttling itself to avoid overloading the IO subsystem. I would add this to the list of waits to filter out and re-run the wait stats query."
            MSQL_DQ                          = "This is SQL Server waiting for a distributed query to finish. This could indicate a problem with the distributed query, or it could just be normal."
            RESOURCE_SEMAPHORE_QUERY_COMPILE = "When there are too many concurrent query compilations going on, SQL Server will throttle them. I don't remember the threshold, but this can indicate excessive recompilation, or maybe single-use plans."
            DAC_INIT                         = "This is the Dedicated Admin Connection initializing."
            MSSEARCH                         = "This is normal to see for full-text operations.  If this is the highest wait, it could mean your system is spending most of its time doing full-text queries. You might want to consider adding this to the filter list."
            PREEMPTIVE_OS_FILEOPS            = "These are SQL Server switching to preemptive scheduling mode to call out to Windows for something. These were added for 2008 and aren't documented anywhere except through the links to my waits library."
            PREEMPTIVE_OS_LIBRARYOPS         = "These are SQL Server switching to preemptive scheduling mode to call out to Windows for something. These were added for 2008 and aren't documented anywhere except through the links to my waits library."
            PREEMPTIVE_OS_LOOKUPACCOUNTSID   = "These are SQL Server switching to preemptive scheduling mode to call out to Windows for something. These were added for 2008 and aren't documented anywhere except through the links to my waits library."
            PREEMPTIVE_OS_QUERYREGISTRY      = "These are SQL Server switching to preemptive scheduling mode to call out to Windows for something. These were added for 2008 and aren't documented anywhere except through the links to my waits library."
            SQLTRACE_LOCK                    = "Part of SQL Trace. I would add this to the list of waits to filter out and re-run the wait stats query."
        }

        # Thanks Brent Ozar via https://gist.github.com/BrentOzar/42e82ee0603a1917c17d74c3fca26d34
        # Thanks Marcin Gminski via https://www.dropbox.com/s/x3zr7u18tc1ojey/WaitStats.sql?dl=0

        $category = [pscustomobject]@{
            ASYNC_IO_COMPLETION                             = 'Other Disk IO'
            ASYNC_NETWORK_IO                                = 'Network IO'
            BACKUPIO                                        = 'Other Disk IO'
            BROKER_CONNECTION_RECEIVE_TASK                  = 'Service Broker'
            BROKER_DISPATCHER                               = 'Service Broker'
            BROKER_ENDPOINT_STATE_MUTEX                     = 'Service Broker'
            BROKER_EVENTHANDLER                             = 'Service Broker'
            BROKER_FORWARDER                                = 'Service Broker'
            BROKER_INIT                                     = 'Service Broker'
            BROKER_MASTERSTART                              = 'Service Broker'
            BROKER_RECEIVE_WAITFOR                          = 'User Wait'
            BROKER_REGISTERALLENDPOINTS                     = 'Service Broker'
            BROKER_SERVICE                                  = 'Service Broker'
            BROKER_SHUTDOWN                                 = 'Service Broker'
            BROKER_START                                    = 'Service Broker'
            BROKER_TASK_SHUTDOWN                            = 'Service Broker'
            BROKER_TASK_STOP                                = 'Service Broker'
            BROKER_TASK_SUBMIT                              = 'Service Broker'
            BROKER_TO_FLUSH                                 = 'Service Broker'
            BROKER_TRANSMISSION_OBJECT                      = 'Service Broker'
            BROKER_TRANSMISSION_TABLE                       = 'Service Broker'
            BROKER_TRANSMISSION_WORK                        = 'Service Broker'
            BROKER_TRANSMITTER                              = 'Service Broker'
            CHECKPOINT_QUEUE                                = 'Idle'
            CHKPT                                           = 'Tran Log IO'
            CLR_AUTO_EVENT                                  = 'SQL CLR'
            CLR_CRST                                        = 'SQL CLR'
            CLR_JOIN                                        = 'SQL CLR'
            CLR_MANUAL_EVENT                                = 'SQL CLR'
            CLR_MEMORY_SPY                                  = 'SQL CLR'
            CLR_MONITOR                                     = 'SQL CLR'
            CLR_RWLOCK_READER                               = 'SQL CLR'
            CLR_RWLOCK_WRITER                               = 'SQL CLR'
            CLR_SEMAPHORE                                   = 'SQL CLR'
            CLR_TASK_START                                  = 'SQL CLR'
            CLRHOST_STATE_ACCESS                            = 'SQL CLR'
            CMEMPARTITIONED                                 = 'Memory'
            CMEMTHREAD                                      = 'Memory'
            CXPACKET                                        = 'Parallelism'
            DBMIRROR_DBM_EVENT                              = 'Mirroring'
            DBMIRROR_DBM_MUTEX                              = 'Mirroring'
            DBMIRROR_EVENTS_QUEUE                           = 'Mirroring'
            DBMIRROR_SEND                                   = 'Mirroring'
            DBMIRROR_WORKER_QUEUE                           = 'Mirroring'
            DBMIRRORING_CMD                                 = 'Mirroring'
            DTC                                             = 'Transaction'
            DTC_ABORT_REQUEST                               = 'Transaction'
            DTC_RESOLVE                                     = 'Transaction'
            DTC_STATE                                       = 'Transaction'
            DTC_TMDOWN_REQUEST                              = 'Transaction'
            DTC_WAITFOR_OUTCOME                             = 'Transaction'
            DTCNEW_ENLIST                                   = 'Transaction'
            DTCNEW_PREPARE                                  = 'Transaction'
            DTCNEW_RECOVERY                                 = 'Transaction'
            DTCNEW_TM                                       = 'Transaction'
            DTCNEW_TRANSACTION_ENLISTMENT                   = 'Transaction'
            DTCPNTSYNC                                      = 'Transaction'
            EE_PMOLOCK                                      = 'Memory'
            EXCHANGE                                        = 'Parallelism'
            EXTERNAL_SCRIPT_NETWORK_IOF                     = 'Network IO'
            FCB_REPLICA_READ                                = 'Replication'
            FCB_REPLICA_WRITE                               = 'Replication'
            FT_COMPROWSET_RWLOCK                            = 'Full Text Search'
            FT_IFTS_RWLOCK                                  = 'Full Text Search'
            FT_IFTS_SCHEDULER_IDLE_WAIT                     = 'Idle'
            FT_IFTSHC_MUTEX                                 = 'Full Text Search'
            FT_IFTSISM_MUTEX                                = 'Full Text Search'
            FT_MASTER_MERGE                                 = 'Full Text Search'
            FT_MASTER_MERGE_COORDINATOR                     = 'Full Text Search'
            FT_METADATA_MUTEX                               = 'Full Text Search'
            FT_PROPERTYLIST_CACHE                           = 'Full Text Search'
            FT_RESTART_CRAWL                                = 'Full Text Search'
            'FULLTEXT GATHERER'                             = 'Full Text Search'
            HADR_AG_MUTEX                                   = 'Replication'
            HADR_AR_CRITICAL_SECTION_ENTRY                  = 'Replication'
            HADR_AR_MANAGER_MUTEX                           = 'Replication'
            HADR_AR_UNLOAD_COMPLETED                        = 'Replication'
            HADR_ARCONTROLLER_NOTIFICATIONS_SUBSCRIBER_LIST = 'Replication'
            HADR_BACKUP_BULK_LOCK                           = 'Replication'
            HADR_BACKUP_QUEUE                               = 'Replication'
            HADR_CLUSAPI_CALL                               = 'Replication'
            HADR_COMPRESSED_CACHE_SYNC                      = 'Replication'
            HADR_CONNECTIVITY_INFO                          = 'Replication'
            HADR_DATABASE_FLOW_CONTROL                      = 'Replication'
            HADR_DATABASE_VERSIONING_STATE                  = 'Replication'
            HADR_DATABASE_WAIT_FOR_RECOVERY                 = 'Replication'
            HADR_DATABASE_WAIT_FOR_RESTART                  = 'Replication'
            HADR_DATABASE_WAIT_FOR_TRANSITION_TO_VERSIONING = 'Replication'
            HADR_DB_COMMAND                                 = 'Replication'
            HADR_DB_OP_COMPLETION_SYNC                      = 'Replication'
            HADR_DB_OP_START_SYNC                           = 'Replication'
            HADR_DBR_SUBSCRIBER                             = 'Replication'
            HADR_DBR_SUBSCRIBER_FILTER_LIST                 = 'Replication'
            HADR_DBSEEDING                                  = 'Replication'
            HADR_DBSEEDING_LIST                             = 'Replication'
            HADR_DBSTATECHANGE_SYNC                         = 'Replication'
            HADR_FABRIC_CALLBACK                            = 'Replication'
            HADR_FILESTREAM_BLOCK_FLUSH                     = 'Replication'
            HADR_FILESTREAM_FILE_CLOSE                      = 'Replication'
            HADR_FILESTREAM_FILE_REQUEST                    = 'Replication'
            HADR_FILESTREAM_IOMGR                           = 'Replication'
            HADR_FILESTREAM_IOMGR_IOCOMPLETION              = 'Replication'
            HADR_FILESTREAM_MANAGER                         = 'Replication'
            HADR_FILESTREAM_PREPROC                         = 'Replication'
            HADR_GROUP_COMMIT                               = 'Replication'
            HADR_LOGCAPTURE_SYNC                            = 'Replication'
            HADR_LOGCAPTURE_WAIT                            = 'Replication'
            HADR_LOGPROGRESS_SYNC                           = 'Replication'
            HADR_NOTIFICATION_DEQUEUE                       = 'Replication'
            HADR_NOTIFICATION_WORKER_EXCLUSIVE_ACCESS       = 'Replication'
            HADR_NOTIFICATION_WORKER_STARTUP_SYNC           = 'Replication'
            HADR_NOTIFICATION_WORKER_TERMINATION_SYNC       = 'Replication'
            HADR_PARTNER_SYNC                               = 'Replication'
            HADR_READ_ALL_NETWORKS                          = 'Replication'
            HADR_RECOVERY_WAIT_FOR_CONNECTION               = 'Replication'
            HADR_RECOVERY_WAIT_FOR_UNDO                     = 'Replication'
            HADR_REPLICAINFO_SYNC                           = 'Replication'
            HADR_SEEDING_CANCELLATION                       = 'Replication'
            HADR_SEEDING_FILE_LIST                          = 'Replication'
            HADR_SEEDING_LIMIT_BACKUPS                      = 'Replication'
            HADR_SEEDING_SYNC_COMPLETION                    = 'Replication'
            HADR_SEEDING_TIMEOUT_TASK                       = 'Replication'
            HADR_SEEDING_WAIT_FOR_COMPLETION                = 'Replication'
            HADR_SYNC_COMMIT                                = 'Replication'
            HADR_SYNCHRONIZING_THROTTLE                     = 'Replication'
            HADR_TDS_LISTENER_SYNC                          = 'Replication'
            HADR_TDS_LISTENER_SYNC_PROCESSING               = 'Replication'
            HADR_THROTTLE_LOG_RATE_GOVERNOR                 = 'Log Rate Governor'
            HADR_TIMER_TASK                                 = 'Replication'
            HADR_TRANSPORT_DBRLIST                          = 'Replication'
            HADR_TRANSPORT_FLOW_CONTROL                     = 'Replication'
            HADR_TRANSPORT_SESSION                          = 'Replication'
            HADR_WORK_POOL                                  = 'Replication'
            HADR_WORK_QUEUE                                 = 'Replication'
            HADR_XRF_STACK_ACCESS                           = 'Replication'
            INSTANCE_LOG_RATE_GOVERNOR                      = 'Log Rate Governor'
            IO_COMPLETION                                   = 'Other Disk IO'
            IO_QUEUE_LIMIT                                  = 'Other Disk IO'
            IO_RETRY                                        = 'Other Disk IO'
            LATCH_DT                                        = 'Latch'
            LATCH_EX                                        = 'Latch'
            LATCH_KP                                        = 'Latch'
            LATCH_NL                                        = 'Latch'
            LATCH_SH                                        = 'Latch'
            LATCH_UP                                        = 'Latch'
            LAZYWRITER_SLEEP                                = 'Idle'
            LCK_M_BU                                        = 'Lock'
            LCK_M_BU_ABORT_BLOCKERS                         = 'Lock'
            LCK_M_BU_LOW_PRIORITY                           = 'Lock'
            LCK_M_IS                                        = 'Lock'
            LCK_M_IS_ABORT_BLOCKERS                         = 'Lock'
            LCK_M_IS_LOW_PRIORITY                           = 'Lock'
            LCK_M_IU                                        = 'Lock'
            LCK_M_IU_ABORT_BLOCKERS                         = 'Lock'
            LCK_M_IU_LOW_PRIORITY                           = 'Lock'
            LCK_M_IX                                        = 'Lock'
            LCK_M_IX_ABORT_BLOCKERS                         = 'Lock'
            LCK_M_IX_LOW_PRIORITY                           = 'Lock'
            LCK_M_RIn_NL                                    = 'Lock'
            LCK_M_RIn_NL_ABORT_BLOCKERS                     = 'Lock'
            LCK_M_RIn_NL_LOW_PRIORITY                       = 'Lock'
            LCK_M_RIn_S                                     = 'Lock'
            LCK_M_RIn_S_ABORT_BLOCKERS                      = 'Lock'
            LCK_M_RIn_S_LOW_PRIORITY                        = 'Lock'
            LCK_M_RIn_U                                     = 'Lock'
            LCK_M_RIn_U_ABORT_BLOCKERS                      = 'Lock'
            LCK_M_RIn_U_LOW_PRIORITY                        = 'Lock'
            LCK_M_RIn_X                                     = 'Lock'
            LCK_M_RIn_X_ABORT_BLOCKERS                      = 'Lock'
            LCK_M_RIn_X_LOW_PRIORITY                        = 'Lock'
            LCK_M_RS_S                                      = 'Lock'
            LCK_M_RS_S_ABORT_BLOCKERS                       = 'Lock'
            LCK_M_RS_S_LOW_PRIORITY                         = 'Lock'
            LCK_M_RS_U                                      = 'Lock'
            LCK_M_RS_U_ABORT_BLOCKERS                       = 'Lock'
            LCK_M_RS_U_LOW_PRIORITY                         = 'Lock'
            LCK_M_RX_S                                      = 'Lock'
            LCK_M_RX_S_ABORT_BLOCKERS                       = 'Lock'
            LCK_M_RX_S_LOW_PRIORITY                         = 'Lock'
            LCK_M_RX_U                                      = 'Lock'
            LCK_M_RX_U_ABORT_BLOCKERS                       = 'Lock'
            LCK_M_RX_U_LOW_PRIORITY                         = 'Lock'
            LCK_M_RX_X                                      = 'Lock'
            LCK_M_RX_X_ABORT_BLOCKERS                       = 'Lock'
            LCK_M_RX_X_LOW_PRIORITY                         = 'Lock'
            LCK_M_S                                         = 'Lock'
            LCK_M_S_ABORT_BLOCKERS                          = 'Lock'
            LCK_M_S_LOW_PRIORITY                            = 'Lock'
            LCK_M_SCH_M                                     = 'Lock'
            LCK_M_SCH_M_ABORT_BLOCKERS                      = 'Lock'
            LCK_M_SCH_M_LOW_PRIORITY                        = 'Lock'
            LCK_M_SCH_S                                     = 'Lock'
            LCK_M_SCH_S_ABORT_BLOCKERS                      = 'Lock'
            LCK_M_SCH_S_LOW_PRIORITY                        = 'Lock'
            LCK_M_SIU                                       = 'Lock'
            LCK_M_SIU_ABORT_BLOCKERS                        = 'Lock'
            LCK_M_SIU_LOW_PRIORITY                          = 'Lock'
            LCK_M_SIX                                       = 'Lock'
            LCK_M_SIX_ABORT_BLOCKERS                        = 'Lock'
            LCK_M_SIX_LOW_PRIORITY                          = 'Lock'
            LCK_M_U                                         = 'Lock'
            LCK_M_U_ABORT_BLOCKERS                          = 'Lock'
            LCK_M_U_LOW_PRIORITY                            = 'Lock'
            LCK_M_UIX                                       = 'Lock'
            LCK_M_UIX_ABORT_BLOCKERS                        = 'Lock'
            LCK_M_UIX_LOW_PRIORITY                          = 'Lock'
            LCK_M_X                                         = 'Lock'
            LCK_M_X_ABORT_BLOCKERS                          = 'Lock'
            LCK_M_X_LOW_PRIORITY                            = 'Lock'
            LOGBUFFER                                       = 'Tran Log IO'
            LOGMGR                                          = 'Tran Log IO'
            LOGMGR_FLUSH                                    = 'Tran Log IO'
            LOGMGR_PMM_LOG                                  = 'Tran Log IO'
            LOGMGR_QUEUE                                    = 'Idle'
            LOGMGR_RESERVE_APPEND                           = 'Tran Log IO'
            MEMORY_ALLOCATION_EXT                           = 'Memory'
            MEMORY_GRANT_UPDATE                             = 'Memory'
            MSQL_XACT_MGR_MUTEX                             = 'Transaction'
            MSQL_XACT_MUTEX                                 = 'Transaction'
            MSSEARCH                                        = 'Full Text Search'
            NET_WAITFOR_PACKET                              = 'Network IO'
            ONDEMAND_TASK_QUEUE                             = 'Idle'
            PAGEIOLATCH_DT                                  = 'Buffer IO'
            PAGEIOLATCH_EX                                  = 'Buffer IO'
            PAGEIOLATCH_KP                                  = 'Buffer IO'
            PAGEIOLATCH_NL                                  = 'Buffer IO'
            PAGEIOLATCH_SH                                  = 'Buffer IO'
            PAGEIOLATCH_UP                                  = 'Buffer IO'
            PAGELATCH_DT                                    = 'Buffer Latch'
            PAGELATCH_EX                                    = 'Buffer Latch'
            PAGELATCH_KP                                    = 'Buffer Latch'
            PAGELATCH_NL                                    = 'Buffer Latch'
            PAGELATCH_SH                                    = 'Buffer Latch'
            PAGELATCH_UP                                    = 'Buffer Latch'
            POOL_LOG_RATE_GOVERNOR                          = 'Log Rate Governor'
            PREEMPTIVE_ABR                                  = 'Preemptive'
            PREEMPTIVE_CLOSEBACKUPMEDIA                     = 'Preemptive'
            PREEMPTIVE_CLOSEBACKUPTAPE                      = 'Preemptive'
            PREEMPTIVE_CLOSEBACKUPVDIDEVICE                 = 'Preemptive'
            PREEMPTIVE_CLUSAPI_CLUSTERRESOURCECONTROL       = 'Preemptive'
            PREEMPTIVE_COM_COCREATEINSTANCE                 = 'Preemptive'
            PREEMPTIVE_COM_COGETCLASSOBJECT                 = 'Preemptive'
            PREEMPTIVE_COM_CREATEACCESSOR                   = 'Preemptive'
            PREEMPTIVE_COM_DELETEROWS                       = 'Preemptive'
            PREEMPTIVE_COM_GETCOMMANDTEXT                   = 'Preemptive'
            PREEMPTIVE_COM_GETDATA                          = 'Preemptive'
            PREEMPTIVE_COM_GETNEXTROWS                      = 'Preemptive'
            PREEMPTIVE_COM_GETRESULT                        = 'Preemptive'
            PREEMPTIVE_COM_GETROWSBYBOOKMARK                = 'Preemptive'
            PREEMPTIVE_COM_LBFLUSH                          = 'Preemptive'
            PREEMPTIVE_COM_LBLOCKREGION                     = 'Preemptive'
            PREEMPTIVE_COM_LBREADAT                         = 'Preemptive'
            PREEMPTIVE_COM_LBSETSIZE                        = 'Preemptive'
            PREEMPTIVE_COM_LBSTAT                           = 'Preemptive'
            PREEMPTIVE_COM_LBUNLOCKREGION                   = 'Preemptive'
            PREEMPTIVE_COM_LBWRITEAT                        = 'Preemptive'
            PREEMPTIVE_COM_QUERYINTERFACE                   = 'Preemptive'
            PREEMPTIVE_COM_RELEASE                          = 'Preemptive'
            PREEMPTIVE_COM_RELEASEACCESSOR                  = 'Preemptive'
            PREEMPTIVE_COM_RELEASEROWS                      = 'Preemptive'
            PREEMPTIVE_COM_RELEASESESSION                   = 'Preemptive'
            PREEMPTIVE_COM_RESTARTPOSITION                  = 'Preemptive'
            PREEMPTIVE_COM_SEQSTRMREAD                      = 'Preemptive'
            PREEMPTIVE_COM_SEQSTRMREADANDWRITE              = 'Preemptive'
            PREEMPTIVE_COM_SETDATAFAILURE                   = 'Preemptive'
            PREEMPTIVE_COM_SETPARAMETERINFO                 = 'Preemptive'
            PREEMPTIVE_COM_SETPARAMETERPROPERTIES           = 'Preemptive'
            PREEMPTIVE_COM_STRMLOCKREGION                   = 'Preemptive'
            PREEMPTIVE_COM_STRMSEEKANDREAD                  = 'Preemptive'
            PREEMPTIVE_COM_STRMSEEKANDWRITE                 = 'Preemptive'
            PREEMPTIVE_COM_STRMSETSIZE                      = 'Preemptive'
            PREEMPTIVE_COM_STRMSTAT                         = 'Preemptive'
            PREEMPTIVE_COM_STRMUNLOCKREGION                 = 'Preemptive'
            PREEMPTIVE_CONSOLEWRITE                         = 'Preemptive'
            PREEMPTIVE_CREATEPARAM                          = 'Preemptive'
            PREEMPTIVE_DEBUG                                = 'Preemptive'
            PREEMPTIVE_DFSADDLINK                           = 'Preemptive'
            PREEMPTIVE_DFSLINKEXISTCHECK                    = 'Preemptive'
            PREEMPTIVE_DFSLINKHEALTHCHECK                   = 'Preemptive'
            PREEMPTIVE_DFSREMOVELINK                        = 'Preemptive'
            PREEMPTIVE_DFSREMOVEROOT                        = 'Preemptive'
            PREEMPTIVE_DFSROOTFOLDERCHECK                   = 'Preemptive'
            PREEMPTIVE_DFSROOTINIT                          = 'Preemptive'
            PREEMPTIVE_DFSROOTSHARECHECK                    = 'Preemptive'
            PREEMPTIVE_DTC_ABORT                            = 'Preemptive'
            PREEMPTIVE_DTC_ABORTREQUESTDONE                 = 'Preemptive'
            PREEMPTIVE_DTC_BEGINTRANSACTION                 = 'Preemptive'
            PREEMPTIVE_DTC_COMMITREQUESTDONE                = 'Preemptive'
            PREEMPTIVE_DTC_ENLIST                           = 'Preemptive'
            PREEMPTIVE_DTC_PREPAREREQUESTDONE               = 'Preemptive'
            PREEMPTIVE_FILESIZEGET                          = 'Preemptive'
            PREEMPTIVE_FSAOLEDB_ABORTTRANSACTION            = 'Preemptive'
            PREEMPTIVE_FSAOLEDB_COMMITTRANSACTION           = 'Preemptive'
            PREEMPTIVE_FSAOLEDB_STARTTRANSACTION            = 'Preemptive'
            PREEMPTIVE_FSRECOVER_UNCONDITIONALUNDO          = 'Preemptive'
            PREEMPTIVE_GETRMINFO                            = 'Preemptive'
            PREEMPTIVE_HADR_LEASE_MECHANISM                 = 'Preemptive'
            PREEMPTIVE_HTTP_EVENT_WAIT                      = 'Preemptive'
            PREEMPTIVE_HTTP_REQUEST                         = 'Preemptive'
            PREEMPTIVE_LOCKMONITOR                          = 'Preemptive'
            PREEMPTIVE_MSS_RELEASE                          = 'Preemptive'
            PREEMPTIVE_ODBCOPS                              = 'Preemptive'
            PREEMPTIVE_OLE_UNINIT                           = 'Preemptive'
            PREEMPTIVE_OLEDB_ABORTORCOMMITTRAN              = 'Preemptive'
            PREEMPTIVE_OLEDB_ABORTTRAN                      = 'Preemptive'
            PREEMPTIVE_OLEDB_GETDATASOURCE                  = 'Preemptive'
            PREEMPTIVE_OLEDB_GETLITERALINFO                 = 'Preemptive'
            PREEMPTIVE_OLEDB_GETPROPERTIES                  = 'Preemptive'
            PREEMPTIVE_OLEDB_GETPROPERTYINFO                = 'Preemptive'
            PREEMPTIVE_OLEDB_GETSCHEMALOCK                  = 'Preemptive'
            PREEMPTIVE_OLEDB_JOINTRANSACTION                = 'Preemptive'
            PREEMPTIVE_OLEDB_RELEASE                        = 'Preemptive'
            PREEMPTIVE_OLEDB_SETPROPERTIES                  = 'Preemptive'
            PREEMPTIVE_OLEDBOPS                             = 'Preemptive'
            PREEMPTIVE_OS_ACCEPTSECURITYCONTEXT             = 'Preemptive'
            PREEMPTIVE_OS_ACQUIRECREDENTIALSHANDLE          = 'Preemptive'
            PREEMPTIVE_OS_AUTHENTICATIONOPS                 = 'Preemptive'
            PREEMPTIVE_OS_AUTHORIZATIONOPS                  = 'Preemptive'
            PREEMPTIVE_OS_AUTHZGETINFORMATIONFROMCONTEXT    = 'Preemptive'
            PREEMPTIVE_OS_AUTHZINITIALIZECONTEXTFROMSID     = 'Preemptive'
            PREEMPTIVE_OS_AUTHZINITIALIZERESOURCEMANAGER    = 'Preemptive'
            PREEMPTIVE_OS_BACKUPREAD                        = 'Preemptive'
            PREEMPTIVE_OS_CLOSEHANDLE                       = 'Preemptive'
            PREEMPTIVE_OS_CLUSTEROPS                        = 'Preemptive'
            PREEMPTIVE_OS_COMOPS                            = 'Preemptive'
            PREEMPTIVE_OS_COMPLETEAUTHTOKEN                 = 'Preemptive'
            PREEMPTIVE_OS_COPYFILE                          = 'Preemptive'
            PREEMPTIVE_OS_CREATEDIRECTORY                   = 'Preemptive'
            PREEMPTIVE_OS_CREATEFILE                        = 'Preemptive'
            PREEMPTIVE_OS_CRYPTACQUIRECONTEXT               = 'Preemptive'
            PREEMPTIVE_OS_CRYPTIMPORTKEY                    = 'Preemptive'
            PREEMPTIVE_OS_CRYPTOPS                          = 'Preemptive'
            PREEMPTIVE_OS_DECRYPTMESSAGE                    = 'Preemptive'
            PREEMPTIVE_OS_DELETEFILE                        = 'Preemptive'
            PREEMPTIVE_OS_DELETESECURITYCONTEXT             = 'Preemptive'
            PREEMPTIVE_OS_DEVICEIOCONTROL                   = 'Preemptive'
            PREEMPTIVE_OS_DEVICEOPS                         = 'Preemptive'
            PREEMPTIVE_OS_DIRSVC_NETWORKOPS                 = 'Preemptive'
            PREEMPTIVE_OS_DISCONNECTNAMEDPIPE               = 'Preemptive'
            PREEMPTIVE_OS_DOMAINSERVICESOPS                 = 'Preemptive'
            PREEMPTIVE_OS_DSGETDCNAME                       = 'Preemptive'
            PREEMPTIVE_OS_DTCOPS                            = 'Preemptive'
            PREEMPTIVE_OS_ENCRYPTMESSAGE                    = 'Preemptive'
            PREEMPTIVE_OS_FILEOPS                           = 'Preemptive'
            PREEMPTIVE_OS_FINDFILE                          = 'Preemptive'
            PREEMPTIVE_OS_FLUSHFILEBUFFERS                  = 'Preemptive'
            PREEMPTIVE_OS_FORMATMESSAGE                     = 'Preemptive'
            PREEMPTIVE_OS_FREECREDENTIALSHANDLE             = 'Preemptive'
            PREEMPTIVE_OS_FREELIBRARY                       = 'Preemptive'
            PREEMPTIVE_OS_GENERICOPS                        = 'Preemptive'
            PREEMPTIVE_OS_GETADDRINFO                       = 'Preemptive'
            PREEMPTIVE_OS_GETCOMPRESSEDFILESIZE             = 'Preemptive'
            PREEMPTIVE_OS_GETDISKFREESPACE                  = 'Preemptive'
            PREEMPTIVE_OS_GETFILEATTRIBUTES                 = 'Preemptive'
            PREEMPTIVE_OS_GETFILESIZE                       = 'Preemptive'
            PREEMPTIVE_OS_GETFINALFILEPATHBYHANDLE          = 'Preemptive'
            PREEMPTIVE_OS_GETLONGPATHNAME                   = 'Preemptive'
            PREEMPTIVE_OS_GETPROCADDRESS                    = 'Preemptive'
            PREEMPTIVE_OS_GETVOLUMENAMEFORVOLUMEMOUNTPOINT  = 'Preemptive'
            PREEMPTIVE_OS_GETVOLUMEPATHNAME                 = 'Preemptive'
            PREEMPTIVE_OS_INITIALIZESECURITYCONTEXT         = 'Preemptive'
            PREEMPTIVE_OS_LIBRARYOPS                        = 'Preemptive'
            PREEMPTIVE_OS_LOADLIBRARY                       = 'Preemptive'
            PREEMPTIVE_OS_LOGONUSER                         = 'Preemptive'
            PREEMPTIVE_OS_LOOKUPACCOUNTSID                  = 'Preemptive'
            PREEMPTIVE_OS_MESSAGEQUEUEOPS                   = 'Preemptive'
            PREEMPTIVE_OS_MOVEFILE                          = 'Preemptive'
            PREEMPTIVE_OS_NETGROUPGETUSERS                  = 'Preemptive'
            PREEMPTIVE_OS_NETLOCALGROUPGETMEMBERS           = 'Preemptive'
            PREEMPTIVE_OS_NETUSERGETGROUPS                  = 'Preemptive'
            PREEMPTIVE_OS_NETUSERGETLOCALGROUPS             = 'Preemptive'
            PREEMPTIVE_OS_NETUSERMODALSGET                  = 'Preemptive'
            PREEMPTIVE_OS_NETVALIDATEPASSWORDPOLICY         = 'Preemptive'
            PREEMPTIVE_OS_NETVALIDATEPASSWORDPOLICYFREE     = 'Preemptive'
            PREEMPTIVE_OS_OPENDIRECTORY                     = 'Preemptive'
            PREEMPTIVE_OS_PDH_WMI_INIT                      = 'Preemptive'
            PREEMPTIVE_OS_PIPEOPS                           = 'Preemptive'
            PREEMPTIVE_OS_PROCESSOPS                        = 'Preemptive'
            PREEMPTIVE_OS_QUERYCONTEXTATTRIBUTES            = 'Preemptive'
            PREEMPTIVE_OS_QUERYREGISTRY                     = 'Preemptive'
            PREEMPTIVE_OS_QUERYSECURITYCONTEXTTOKEN         = 'Preemptive'
            PREEMPTIVE_OS_REMOVEDIRECTORY                   = 'Preemptive'
            PREEMPTIVE_OS_REPORTEVENT                       = 'Preemptive'
            PREEMPTIVE_OS_REVERTTOSELF                      = 'Preemptive'
            PREEMPTIVE_OS_RSFXDEVICEOPS                     = 'Preemptive'
            PREEMPTIVE_OS_SECURITYOPS                       = 'Preemptive'
            PREEMPTIVE_OS_SERVICEOPS                        = 'Preemptive'
            PREEMPTIVE_OS_SETENDOFFILE                      = 'Preemptive'
            PREEMPTIVE_OS_SETFILEPOINTER                    = 'Preemptive'
            PREEMPTIVE_OS_SETFILEVALIDDATA                  = 'Preemptive'
            PREEMPTIVE_OS_SETNAMEDSECURITYINFO              = 'Preemptive'
            PREEMPTIVE_OS_SQLCLROPS                         = 'Preemptive'
            PREEMPTIVE_OS_SQMLAUNCH                         = 'Preemptive'
            PREEMPTIVE_OS_VERIFYSIGNATURE                   = 'Preemptive'
            PREEMPTIVE_OS_VERIFYTRUST                       = 'Preemptive'
            PREEMPTIVE_OS_VSSOPS                            = 'Preemptive'
            PREEMPTIVE_OS_WAITFORSINGLEOBJECT               = 'Preemptive'
            PREEMPTIVE_OS_WINSOCKOPS                        = 'Preemptive'
            PREEMPTIVE_OS_WRITEFILE                         = 'Preemptive'
            PREEMPTIVE_OS_WRITEFILEGATHER                   = 'Preemptive'
            PREEMPTIVE_OS_WSASETLASTERROR                   = 'Preemptive'
            PREEMPTIVE_REENLIST                             = 'Preemptive'
            PREEMPTIVE_RESIZELOG                            = 'Preemptive'
            PREEMPTIVE_ROLLFORWARDREDO                      = 'Preemptive'
            PREEMPTIVE_ROLLFORWARDUNDO                      = 'Preemptive'
            PREEMPTIVE_SB_STOPENDPOINT                      = 'Preemptive'
            PREEMPTIVE_SERVER_STARTUP                       = 'Preemptive'
            PREEMPTIVE_SETRMINFO                            = 'Preemptive'
            PREEMPTIVE_SHAREDMEM_GETDATA                    = 'Preemptive'
            PREEMPTIVE_SNIOPEN                              = 'Preemptive'
            PREEMPTIVE_SOSHOST                              = 'Preemptive'
            PREEMPTIVE_SOSTESTING                           = 'Preemptive'
            PREEMPTIVE_SP_SERVER_DIAGNOSTICS                = 'Preemptive'
            PREEMPTIVE_STARTRM                              = 'Preemptive'
            PREEMPTIVE_STREAMFCB_CHECKPOINT                 = 'Preemptive'
            PREEMPTIVE_STREAMFCB_RECOVER                    = 'Preemptive'
            PREEMPTIVE_STRESSDRIVER                         = 'Preemptive'
            PREEMPTIVE_TESTING                              = 'Preemptive'
            PREEMPTIVE_TRANSIMPORT                          = 'Preemptive'
            PREEMPTIVE_UNMARSHALPROPAGATIONTOKEN            = 'Preemptive'
            PREEMPTIVE_VSS_CREATESNAPSHOT                   = 'Preemptive'
            PREEMPTIVE_VSS_CREATEVOLUMESNAPSHOT             = 'Preemptive'
            PREEMPTIVE_XE_CALLBACKEXECUTE                   = 'Preemptive'
            PREEMPTIVE_XE_CX_FILE_OPEN                      = 'Preemptive'
            PREEMPTIVE_XE_CX_HTTP_CALL                      = 'Preemptive'
            PREEMPTIVE_XE_DISPATCHER                        = 'Preemptive'
            PREEMPTIVE_XE_ENGINEINIT                        = 'Preemptive'
            PREEMPTIVE_XE_GETTARGETSTATE                    = 'Preemptive'
            PREEMPTIVE_XE_SESSIONCOMMIT                     = 'Preemptive'
            PREEMPTIVE_XE_TARGETFINALIZE                    = 'Preemptive'
            PREEMPTIVE_XE_TARGETINIT                        = 'Preemptive'
            PREEMPTIVE_XE_TIMERRUN                          = 'Preemptive'
            PREEMPTIVE_XETESTING                            = 'Preemptive'
            PWAIT_HADR_ACTION_COMPLETED                     = 'Replication'
            PWAIT_HADR_CHANGE_NOTIFIER_TERMINATION_SYNC     = 'Replication'
            PWAIT_HADR_CLUSTER_INTEGRATION                  = 'Replication'
            PWAIT_HADR_FAILOVER_COMPLETED                   = 'Replication'
            PWAIT_HADR_JOIN                                 = 'Replication'
            PWAIT_HADR_OFFLINE_COMPLETED                    = 'Replication'
            PWAIT_HADR_ONLINE_COMPLETED                     = 'Replication'
            PWAIT_HADR_POST_ONLINE_COMPLETED                = 'Replication'
            PWAIT_HADR_SERVER_READY_CONNECTIONS             = 'Replication'
            PWAIT_HADR_WORKITEM_COMPLETED                   = 'Replication'
            PWAIT_HADRSIM                                   = 'Replication'
            PWAIT_RESOURCE_SEMAPHORE_FT_PARALLEL_QUERY_SYNC = 'Full Text Search'
            QUERY_TRACEOUT                                  = 'Tracing'
            REPL_CACHE_ACCESS                               = 'Replication'
            REPL_HISTORYCACHE_ACCESS                        = 'Replication'
            REPL_SCHEMA_ACCESS                              = 'Replication'
            REPL_TRANFSINFO_ACCESS                          = 'Replication'
            REPL_TRANHASHTABLE_ACCESS                       = 'Replication'
            REPL_TRANTEXTINFO_ACCESS                        = 'Replication'
            REPLICA_WRITES                                  = 'Replication'
            REQUEST_FOR_DEADLOCK_SEARCH                     = 'Idle'
            RESERVED_MEMORY_ALLOCATION_EXT                  = 'Memory'
            RESOURCE_SEMAPHORE                              = 'Memory'
            RESOURCE_SEMAPHORE_QUERY_COMPILE                = 'Compilation'
            SLEEP_BPOOL_FLUSH                               = 'Idle'
            SLEEP_BUFFERPOOL_HELPLW                         = 'Idle'
            SLEEP_DBSTARTUP                                 = 'Idle'
            SLEEP_DCOMSTARTUP                               = 'Idle'
            SLEEP_MASTERDBREADY                             = 'Idle'
            SLEEP_MASTERMDREADY                             = 'Idle'
            SLEEP_MASTERUPGRADED                            = 'Idle'
            SLEEP_MEMORYPOOL_ALLOCATEPAGES                  = 'Idle'
            SLEEP_MSDBSTARTUP                               = 'Idle'
            SLEEP_RETRY_VIRTUALALLOC                        = 'Idle'
            SLEEP_SYSTEMTASK                                = 'Idle'
            SLEEP_TASK                                      = 'Idle'
            SLEEP_TEMPDBSTARTUP                             = 'Idle'
            SLEEP_WORKSPACE_ALLOCATEPAGE                    = 'Idle'
            SOS_SCHEDULER_YIELD                             = 'CPU'
            SQLCLR_APPDOMAIN                                = 'SQL CLR'
            SQLCLR_ASSEMBLY                                 = 'SQL CLR'
            SQLCLR_DEADLOCK_DETECTION                       = 'SQL CLR'
            SQLCLR_QUANTUM_PUNISHMENT                       = 'SQL CLR'
            SQLTRACE_BUFFER_FLUSH                           = 'Idle'
            SQLTRACE_FILE_BUFFER                            = 'Tracing'
            SQLTRACE_FILE_READ_IO_COMPLETION                = 'Tracing'
            SQLTRACE_FILE_WRITE_IO_COMPLETION               = 'Tracing'
            SQLTRACE_INCREMENTAL_FLUSH_SLEEP                = 'Idle'
            SQLTRACE_PENDING_BUFFER_WRITERS                 = 'Tracing'
            SQLTRACE_SHUTDOWN                               = 'Tracing'
            SQLTRACE_WAIT_ENTRIES                           = 'Idle'
            THREADPOOL                                      = 'Worker Thread'
            TRACE_EVTNOTIF                                  = 'Tracing'
            TRACEWRITE                                      = 'Tracing'
            TRAN_MARKLATCH_DT                               = 'Transaction'
            TRAN_MARKLATCH_EX                               = 'Transaction'
            TRAN_MARKLATCH_KP                               = 'Transaction'
            TRAN_MARKLATCH_NL                               = 'Transaction'
            TRAN_MARKLATCH_SH                               = 'Transaction'
            TRAN_MARKLATCH_UP                               = 'Transaction'
            TRANSACTION_MUTEX                               = 'Transaction'
            WAIT_FOR_RESULTS                                = 'User Wait'
            WAITFOR                                         = 'User Wait'
            WRITE_COMPLETION                                = 'Other Disk IO'
            WRITELOG                                        = 'Tran Log IO'
            XACT_OWN_TRANSACTION                            = 'Transaction'
            XACT_RECLAIM_SESSION                            = 'Transaction'
            XACTLOCKINFO                                    = 'Transaction'
            XACTWORKSPACE_MUTEX                             = 'Transaction'
            XE_DISPATCHER_WAIT                              = 'Idle'
            XE_TIMER_EVENT                                  = 'Idle'
            ABR                                             = 'Other'
            ASSEMBLY_LOAD                                   = 'SQLCLR'
            ASYNC_DISKPOOL_LOCK                             = 'Buffer I/O'
            BACKUP                                          = 'Backup'
            BACKUP_CLIENTLOCK                               = 'Backup'
            BACKUP_OPERATOR                                 = 'Backup'
            BACKUPBUFFER                                    = 'Backup'
            BACKUPTHREAD                                    = 'Backup'
            BAD_PAGE_PROCESS                                = 'Other'
            BUILTIN_HASHKEY_MUTEX                           = 'Other'
            CHECK_PRINT_RECORD                              = 'Other'
            CPU                                             = 'CPU'
            CURSOR                                          = 'Other'
            CURSOR_ASYNC                                    = 'Other'
            DAC_INIT                                        = 'Other'
            DBCC_COLUMN_TRANSLATION_CACHE                   = 'Other'
            DBTABLE                                         = 'Other'
            DEADLOCK_ENUM_MUTEX                             = 'Latch'
            DEADLOCK_TASK_SEARCH                            = 'Other'
            DEBUG                                           = 'Other'
            DISABLE_VERSIONING                              = 'Other'
            DISKIO_SUSPEND                                  = 'Backup'
            DLL_LOADING_MUTEX                               = 'Other'
            DROPTEMP                                        = 'Other'
            DUMP_LOG_COORDINATOR                            = 'Other'
            DUMP_LOG_COORDINATOR_QUEUE                      = 'Other'
            DUMPTRIGGER                                     = 'Other'
            EC                                              = 'Other'
            EE_SPECPROC_MAP_INIT                            = 'Other'
            ENABLE_VERSIONING                               = 'Other'
            ERROR_REPORTING_MANAGER                         = 'Other'
            EXECSYNC                                        = 'Parallelism'
            EXECUTION_PIPE_EVENT_INTERNAL                   = 'Other'
            FAILPOINT                                       = 'Other'
            FS_GARBAGE_COLLECTOR_SHUTDOWN                   = 'SQLCLR'
            FSAGENT                                         = 'Idle'
            FT_RESUME_CRAWL                                 = 'Other'
            GUARDIAN                                        = 'Other'
            HTTP_ENDPOINT_COLLCREATE                        = 'Other'
            HTTP_ENUMERATION                                = 'Other'
            HTTP_START                                      = 'Other'
            IMP_IMPORT_MUTEX                                = 'Other'
            IMPPROV_IOWAIT                                  = 'Other'
            INDEX_USAGE_STATS_MUTEX                         = 'Latch'
            INTERNAL_TESTING                                = 'Other'
            IO_AUDIT_MUTEX                                  = 'Other'
            KSOURCE_WAKEUP                                  = 'Idle'
            KTM_ENLISTMENT                                  = 'Other'
            KTM_RECOVERY_MANAGER                            = 'Other'
            KTM_RECOVERY_RESOLUTION                         = 'Other'
            LOWFAIL_MEMMGR_QUEUE                            = 'Memory'
            MIRROR_SEND_MESSAGE                             = 'Other'
            MISCELLANEOUS                                   = 'Other'
            MSQL_DQ                                         = 'Network I/O'
            MSQL_SYNC_PIPE                                  = 'Other'
            MSQL_XP                                         = 'Other'
            OLEDB                                           = 'Network I/O'
            PARALLEL_BACKUP_QUEUE                           = 'Other'
            PRINT_ROLLBACK_PROGRESS                         = 'Other'
            QNMANAGER_ACQUIRE                               = 'Other'
            QPJOB_KILL                                      = 'Other'
            QPJOB_WAITFOR_ABORT                             = 'Other'
            QRY_MEM_GRANT_INFO_MUTEX                        = 'Other'
            QUERY_ERRHDL_SERVICE_DONE                       = 'Other'
            QUERY_EXECUTION_INDEX_SORT_EVENT_OPEN           = 'Other'
            QUERY_NOTIFICATION_MGR_MUTEX                    = 'Other'
            QUERY_NOTIFICATION_SUBSCRIPTION_MUTEX           = 'Other'
            QUERY_NOTIFICATION_TABLE_MGR_MUTEX              = 'Other'
            QUERY_NOTIFICATION_UNITTEST_MUTEX               = 'Other'
            QUERY_OPTIMIZER_PRINT_MUTEX                     = 'Other'
            QUERY_REMOTE_BRICKS_DONE                        = 'Other'
            RECOVER_CHANGEDB                                = 'Other'
            REQUEST_DISPENSER_PAUSE                         = 'Other'
            RESOURCE_QUEUE                                  = 'Idle'
            RESOURCE_SEMAPHORE_MUTEX                        = 'Compilation'
            RESOURCE_SEMAPHORE_SMALL_QUERY                  = 'Compilation'
            SEC_DROP_TEMP_KEY                               = 'Other'
            SEQUENTIAL_GUID                                 = 'Other'
            SERVER_IDLE_CHECK                               = 'Idle'
            SHUTDOWN                                        = 'Other'
            SNI_CRITICAL_SECTION                            = 'Other'
            SNI_HTTP_ACCEPT                                 = 'Idle'
            SNI_HTTP_WAITFOR_0_DISCON                       = 'Other'
            SNI_LISTENER_ACCESS                             = 'Other'
            SNI_TASK_COMPLETION                             = 'Other'
            SOAP_READ                                       = 'Full Text Search'
            SOAP_WRITE                                      = 'Full Text Search'
            SOS_CALLBACK_REMOVAL                            = 'Other'
            SOS_DISPATCHER_MUTEX                            = 'Other'
            SOS_LOCALALLOCATORLIST                          = 'Other'
            SOS_OBJECT_STORE_DESTROY_MUTEX                  = 'Other'
            SOS_PROCESS_AFFINITY_MUTEX                      = 'Other'
            SOS_RESERVEDMEMBLOCKLIST                        = 'Memory'
            SOS_STACKSTORE_INIT_MUTEX                       = 'Other'
            SOS_SYNC_TASK_ENQUEUE_EVENT                     = 'Other'
            SOS_VIRTUALMEMORY_LOW                           = 'Memory'
            SOSHOST_EVENT                                   = 'Other'
            SOSHOST_INTERNAL                                = 'Other'
            SOSHOST_MUTEX                                   = 'Other'
            SOSHOST_RWLOCK                                  = 'Other'
            SOSHOST_SEMAPHORE                               = 'Other'
            SOSHOST_SLEEP                                   = 'Other'
            SOSHOST_TRACELOCK                               = 'Other'
            SOSHOST_WAITFORDONE                             = 'Other'
            SQLSORT_NORMMUTEX                               = 'Other'
            SQLSORT_SORTMUTEX                               = 'Other'
            SQLTRACE_LOCK                                   = 'Other'
            SRVPROC_SHUTDOWN                                = 'Other'
            TEMPOBJ                                         = 'Other'
            TIMEPRIV_TIMEPERIOD                             = 'Other'
            UTIL_PAGE_ALLOC                                 = 'Memory'
            VIA_ACCEPT                                      = 'Other'
            VIEW_DEFINITION_MUTEX                           = 'Latch'
            WAITFOR_TASKSHUTDOWN                            = 'Idle'
            WAITSTAT_MUTEX                                  = 'Other'
            WCC                                             = 'Other'
            WORKTBL_DROP                                    = 'Other'
            XE_BUFFERMGR_ALLPROCECESSED_EVENT               = 'Other'
            XE_BUFFERMGR_FREEBUF_EVENT                      = 'Other'
            XE_DISPATCHER_JOIN                              = 'Other'
            XE_MODULEMGR_SYNC                               = 'Other'
            XE_OLS_LOCK                                     = 'Other'
            XE_SERVICES_MUTEX                               = 'Other'
            XE_SESSION_CREATE_SYNC                          = 'Other'
            XE_SESSION_SYNC                                 = 'Other'
            XE_STM_CREATE                                   = 'Other'
            XE_TIMER_MUTEX                                  = 'Other'
            XE_TIMER_TASK_DONE                              = 'Other'
        }

        $ignorable = 'BROKER_EVENTHANDLER', 'BROKER_RECEIVE_WAITFOR', 'BROKER_TASK_STOP',
        'BROKER_TO_FLUSH', 'BROKER_TRANSMITTER', 'CHECKPOINT_QUEUE',
        'CHKPT', 'CLR_AUTO_EVENT', 'CLR_MANUAL_EVENT', 'CLR_SEMAPHORE', 'CXCONSUMER',
        'DBMIRROR_DBM_EVENT', 'DBMIRROR_EVENTS_QUEUE', 'DBMIRROR_WORKER_QUEUE',
        'DBMIRRORING_CMD', 'DIRTY_PAGE_POLL', 'DISPATCHER_QUEUE_SEMAPHORE',
        'EXECSYNC', 'FSAGENT', 'FT_IFTS_SCHEDULER_IDLE_WAIT', 'FT_IFTSHC_MUTEX',
        'HADR_CLUSAPI_CALL', 'HADR_FILESTREAM_IOMGR_IOCOMPLETION', 'HADR_LOGCAPTURE_WAIT',
        'HADR_NOTIFICATION_DEQUEUE', 'HADR_TIMER_TASK', 'HADR_WORK_QUEUE',
        'KSOURCE_WAKEUP', 'LAZYWRITER_SLEEP', 'LOGMGR_QUEUE',
        'MEMORY_ALLOCATION_EXT', 'ONDEMAND_TASK_QUEUE',
        'PARALLEL_REDO_DRAIN_WORKER', 'PARALLEL_REDO_LOG_CACHE', 'PARALLEL_REDO_TRAN_LIST', 'PARALLEL_REDO_WORKER_SYNC',
        'PREEMPTIVE_SP_SERVER_DIAGNOSTICS',
        'PARALLEL_REDO_WORKER_WAIT_WORK', 'PREEMPTIVE_HADR_LEASE_MECHANISM',
        'PREEMPTIVE_OS_LIBRARYOPS', 'PREEMPTIVE_OS_COMOPS', 'PREEMPTIVE_OS_CRYPTOPS',
        'PREEMPTIVE_OS_PIPEOPS', 'PREEMPTIVE_OS_AUTHENTICATIONOPS',
        'PREEMPTIVE_OS_GENERICOPS', 'PREEMPTIVE_OS_VERIFYTRUST',
        'PREEMPTIVE_OS_FILEOPS', 'PREEMPTIVE_OS_DEVICEOPS', 'PREEMPTIVE_OS_QUERYREGISTRY',
        'PREEMPTIVE_OS_WRITEFILE', 'PREEMPTIVE_XE_CALLBACKEXECUTE', 'PREEMPTIVE_XE_DISPATCHER',
        'PREEMPTIVE_XE_GETTARGETSTATE', 'PREEMPTIVE_XE_SESSIONCOMMIT',
        'PREEMPTIVE_XE_TARGETINIT', 'PREEMPTIVE_XE_TARGETFINALIZE',
        'PWAIT_ALL_COMPONENTS_INITIALIZED', 'PWAIT_DIRECTLOGCONSUMER_GETNEXT',
        'QDS_PERSIST_TASK_MAIN_LOOP_SLEEP', 'QDS_ASYNC_QUEUE',
        'QDS_CLEANUP_STALE_QUERIES_TASK_MAIN_LOOP_SLEEP', 'REDO_THREAD_PENDING_WORK',
        'QDS_SHUTDOWN_QUEUE', 'REQUEST_FOR_DEADLOCK_SEARCH',
        'RESOURCE_QUEUE', 'SERVER_IDLE_CHECK', 'SLEEP_BPOOL_FLUSH', 'SLEEP_DBSTARTUP',
        'SLEEP_DCOMSTARTUP', 'SLEEP_MASTERDBREADY', 'SLEEP_MASTERMDREADY',
        'SLEEP_MASTERUPGRADED', 'SLEEP_MSDBSTARTUP', 'SLEEP_SYSTEMTASK', 'SLEEP_TASK',
        'SLEEP_TEMPDBSTARTUP', 'SNI_HTTP_ACCEPT', 'SP_SERVER_DIAGNOSTICS_SLEEP',
        'SQLTRACE_BUFFER_FLUSH', 'SQLTRACE_INCREMENTAL_FLUSH_SLEEP', 'SQLTRACE_WAIT_ENTRIES',
        'WAIT_FOR_RESULTS', 'WAITFOR', 'WAITFOR_TASKSHUTDOWN', 'WAIT_XTP_HOST_WAIT',
        'WAIT_XTP_OFFLINE_CKPT_NEW_LOG', 'WAIT_XTP_CKPT_CLOSE', 'WAIT_XTP_RECOVERY',
        'XE_BUFFERMGR_ALLPROCESSED_EVENT', 'XE_DISPATCHER_JOIN',
        'XE_DISPATCHER_WAIT', 'XE_LIVE_TARGET_TVF', 'XE_TIMER_EVENT'

        if ($IncludeIgnorable) {
            $sql = "WITH [Waits] AS
                (SELECT
                    [wait_type],
                    [wait_time_ms] / 1000.0 AS [WaitS],
                    ([wait_time_ms] - [signal_wait_time_ms]) / 1000.0 AS [ResourceS],
                    [signal_wait_time_ms] / 1000.0 AS [SignalS],
                    [waiting_tasks_count] AS [WaitCount],
                    Case WHEN SUM ([wait_time_ms]) OVER() = 0 THEN NULL ELSE 100.0 * [wait_time_ms] / SUM ([wait_time_ms]) OVER() END AS [Percentage],
                    ROW_NUMBER() OVER(ORDER BY [wait_time_ms] DESC) AS [RowNum]
                FROM sys.dm_os_wait_stats
                WHERE [waiting_tasks_count] > 0
                )
                SELECT
                    MAX ([W1].[wait_type]) AS [WaitType],
                    CAST (MAX ([W1].[WaitS]) AS DECIMAL (16,2)) AS [WaitSeconds],
                    CAST (MAX ([W1].[ResourceS]) AS DECIMAL (16,2)) AS [ResourceSeconds],
                    CAST (MAX ([W1].[SignalS]) AS DECIMAL (16,2)) AS [SignalSeconds],
                    MAX ([W1].[WaitCount]) AS [WaitCount],
                    CAST (MAX ([W1].[Percentage]) AS DECIMAL (5,2)) AS [Percentage],
                    CAST ((MAX ([W1].[WaitS]) / MAX ([W1].[WaitCount])) AS DECIMAL (16,4)) AS [AvgWaitSeconds],
                    CAST ((MAX ([W1].[ResourceS]) / MAX ([W1].[WaitCount])) AS DECIMAL (16,4)) AS [AvgResSeconds],
                    CAST ((MAX ([W1].[SignalS]) / MAX ([W1].[WaitCount])) AS DECIMAL (16,4)) AS [AvgSigSeconds],
                    CAST ('https://www.sqlskills.com/help/waits/' + MAX ([W1].[wait_type]) as XML) AS [URL]
                FROM [Waits] AS [W1]
                INNER JOIN [Waits] AS [W2]
                    ON [W2].[RowNum] <= [W1].[RowNum]
                GROUP BY [W1].[RowNum] HAVING SUM ([W2].[Percentage]) - MAX([W1].[Percentage]) < $Threshold"
        } else {
            $IgnorableList = "'$($ignorable -join "','")'"
            $sql = "WITH [Waits] AS
                (SELECT
                    [wait_type],
                    [wait_time_ms] / 1000.0 AS [WaitS],
                    ([wait_time_ms] - [signal_wait_time_ms]) / 1000.0 AS [ResourceS],
                    [signal_wait_time_ms] / 1000.0 AS [SignalS],
                    [waiting_tasks_count] AS [WaitCount],
                    Case WHEN SUM ([wait_time_ms]) OVER() = 0 THEN NULL ELSE 100.0 * [wait_time_ms] / SUM ([wait_time_ms]) OVER() END AS [Percentage],
                    ROW_NUMBER() OVER(ORDER BY [wait_time_ms] DESC) AS [RowNum]
                FROM sys.dm_os_wait_stats
                WHERE [waiting_tasks_count] > 0
                AND Cast([wait_type] as VARCHAR(60)) NOT IN ($IgnorableList)
                )
                SELECT
                    MAX ([W1].[wait_type]) AS [WaitType],
                    CAST (MAX ([W1].[WaitS]) AS DECIMAL (16,2)) AS [WaitSeconds],
                    CAST (MAX ([W1].[ResourceS]) AS DECIMAL (16,2)) AS [ResourceSeconds],
                    CAST (MAX ([W1].[SignalS]) AS DECIMAL (16,2)) AS [SignalSeconds],
                    MAX ([W1].[WaitCount]) AS [WaitCount],
                    CAST (MAX ([W1].[Percentage]) AS DECIMAL (5,2)) AS [Percentage],
                    CAST ((MAX ([W1].[WaitS]) / MAX ([W1].[WaitCount])) AS DECIMAL (16,4)) AS [AvgWaitSeconds],
                    CAST ((MAX ([W1].[ResourceS]) / MAX ([W1].[WaitCount])) AS DECIMAL (16,4)) AS [AvgResSeconds],
                    CAST ((MAX ([W1].[SignalS]) / MAX ([W1].[WaitCount])) AS DECIMAL (16,4)) AS [AvgSigSeconds],
                    CAST ('https://www.sqlskills.com/help/waits/' + MAX ([W1].[wait_type]) as XML) AS [URL]
                FROM [Waits] AS [W1]
                INNER JOIN [Waits] AS [W2]
                    ON [W2].[RowNum] <= [W1].[RowNum]
                GROUP BY [W1].[RowNum] HAVING SUM ([W2].[Percentage]) - MAX([W1].[Percentage]) < $Threshold"

        }
        Write-Message -Level Debug -Message $sql
    }
    process {
        foreach ($instance in $SqlInstance) {

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }
            Write-Message -Level Verbose -Message "Connected to $instance"
            if ($IncludeIgnorable) {
                $excludeColumns = 'Notes'
            } else {
                $excludeColumns = 'Notes', 'Ignorable'
            }

            foreach ($row in $server.Query($sql)) {
                $waitType = $row.WaitType
                if (-not $IncludeIgnorable) {
                    if ($ignorable -contains $waitType) { continue }
                }

                [PSCustomObject]@{
                    ComputerName           = $server.ComputerName
                    InstanceName           = $server.ServiceName
                    SqlInstance            = $server.DomainInstanceName
                    WaitType               = $waitType
                    Category               = ($category).$waitType
                    WaitSeconds            = $row.WaitSeconds
                    ResourceSeconds        = $row.ResourceSeconds
                    SignalSeconds          = $row.SignalSeconds
                    WaitCount              = $row.WaitCount
                    Percentage             = $row.Percentage
                    AverageWaitSeconds     = $row.AvgWaitSeconds
                    AverageResourceSeconds = $row.AvgResSeconds
                    AverageSignalSeconds   = $row.AvgSigSeconds
                    Ignorable              = ($ignorable -contains $waitType)
                    URL                    = $row.URL
                    Notes                  = ($details).$waitType
                } | Select-DefaultView -ExcludeProperty $excludeColumns
            }
        }
    }
}

tools\dbatools\functions\Get-DbaWindowsLog.ps1

function Get-DbaWindowsLog {
    <#
    .SYNOPSIS
        Gets Windows Application events associated with an instance

    .DESCRIPTION
        Gets Windows Application events associated with an instance

    .PARAMETER SqlInstance
        The instance(s) to retrieve the event logs from

    .PARAMETER Start
        Default: 1970
        Retrieve all events starting from this timestamp.

    .PARAMETER End
        Default: Now
        Retrieve all events that happened before this timestamp

    .PARAMETER Credential
        Credential to be used to connect to the Server. Note this is a Windows credential, as this command requires we communicate with the computer and not with the SQL instance.

    .PARAMETER MaxThreads
        Default: Unlimited
        The maximum number of parallel threads used on the local computer.
        Given that those will mostly be waiting for the remote system, there is usually no need to limit this.

    .PARAMETER MaxRemoteThreads
        Default: 2
        The maximum number of parallel threads that are executed on the target sql server.
        These processes will cause considerable CPU load, so a low limit is advisable in most scenarios.
        Any value lower than 1 disables the limit

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Logging
        Author: Drew Furgiuele | Friedrich Weinmann (@FredWeinmann)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaWindowsLog

    .EXAMPLE
        PS C:\> $ErrorLogs = Get-DbaWindowsLog -SqlInstance sql01\sharepoint
        PS C:\> $ErrorLogs | Where-Object ErrorNumber -eq 18456

        Returns all lines in the errorlogs that have event number 18456 in them

    #>
    #This exists to ignore the Script Analyzer rule for Start-Runspace
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseShouldProcessForStateChangingFunctions", "")]
    [CmdletBinding()]
    param (
        [Parameter(ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]
        $SqlInstance = $env:COMPUTERNAME,

        [DateTime]
        $Start = "1/1/1970 00:00:00",

        [DateTime]
        $End = (Get-Date),


        [System.Management.Automation.PSCredential]
        $Credential,

        [int]
        $MaxThreads = 0,

        [int]
        $MaxRemoteThreads = 2,

        [switch]
        [Alias('Silent')]$EnableException
    )

    begin {
        Write-Message -Level Debug -Message "Bound parameters: $($PSBoundParameters.Keys -join ", ")"

        #region Helper Functions
        function Start-Runspace {
            $Powershell = [PowerShell]::Create().AddScript($scriptBlock_ParallelRemoting).AddParameter("SqlInstance", $instance).AddParameter("Start", $Start).AddParameter("End", $End).AddParameter("Credential", $Credential).AddParameter("MaxRemoteThreads", $MaxRemoteThreads).AddParameter("ScriptBlock", $scriptBlock_RemoteExecution)
            $Powershell.RunspacePool = $RunspacePool
            Write-Message -Level Verbose -Message "Launching remote runspace against <c='green'>$instance</c>" -Target $instance
            $null = $RunspaceCollection.Add((New-Object -TypeName PSObject -Property @{ Runspace = $PowerShell.BeginInvoke(); PowerShell = $PowerShell; Instance = $instance.FullSmoName }))
        }

        function Receive-Runspace {
            [Parameter()]
            param (
                [switch]
                $Wait
            )

            do {
                foreach ($Run in $RunspaceCollection.ToArray()) {
                    if ($Run.Runspace.IsCompleted) {
                        Write-Message -Level Verbose -Message "Receiving results from <c='green'>$($Run.Instance)</c>" -Target $Run.Instance
                        $Run.PowerShell.EndInvoke($Run.Runspace)
                        $Run.PowerShell.Dispose()
                        $RunspaceCollection.Remove($Run)
                    }
                }

                if ($Wait -and ($RunspaceCollection.Count -gt 0)) { Start-Sleep -Milliseconds 250 }
            }
            while ($Wait -and ($RunspaceCollection.Count -gt 0))
        }
        #endregion Helper Functions

        #region Scriptblocks
        $scriptBlock_RemoteExecution = {
            param (
                [System.DateTime]
                $Start,

                [System.DateTime]
                $End,

                [string]
                $InstanceName,

                [int]
                $Throttle
            )

            #region Helper function
            function Convert-ErrorRecord {
                param (
                    $Line
                )

                if (Get-Variable -Name codesAndStuff -Scope 1) {
                    $line2 = (Get-Variable -Name codesAndStuff -Scope 1).Value
                    Remove-Variable -Name codesAndStuff -Scope 1

                    $groups = [regex]::Matches($line2, '^([\d- :]+.\d\d) (\w+)[ ]+Error: (\d+), Severity: (\d+), State: (\d+)').Groups
                    $groups2 = [regex]::Matches($line, '^[\d- :]+.\d\d \w+[ ]+(.*)$').Groups

                    New-Object PSObject -Property @{
                        Timestamp   = [DateTime]::ParseExact($groups[1].Value, "yyyy-MM-dd HH:mm:ss.ff", $null)
                        Spid        = $groups[2].Value
                        Message     = $groups2[1].Value
                        ErrorNumber = [int]($groups[3].Value)
                        Severity    = [int]($groups[4].Value)
                        State       = [int]($groups[5].Value)
                    }
                }

                if ($Line -match '^\d{4}-\d\d-\d\d \d\d:\d\d:\d\d\.\d\d[\w ]+((\w+): (\d+)[,\.]\s?){3}') {
                    Set-Variable -Name codesAndStuff -Value $Line -Scope 1
                }
            }
            #endregion Helper function

            #region Script that processes an individual file
            $scriptBlock = {
                param (
                    [System.IO.FileInfo]
                    $File
                )

                try {
                    $stream = New-Object System.IO.FileStream($File.FullName, "Open", "Read", "ReadWrite, Delete")
                    $reader = New-Object System.IO.StreamReader($stream)

                    while (-not $reader.EndOfStream) {
                        Convert-ErrorRecord -Line $reader.ReadLine()
                    }
                } catch {
                    # here to avoid an empty catch
                    $null = 1
                }
            }
            #endregion Script that processes an individual file

            #region Gather list of files to process
            $eventSource = "MSSQLSERVER"
            if ($InstanceName -notmatch "^DEFAULT$|^MSSQLSERVER$") {
                $eventSource = 'MSSQL$' + $InstanceName
            }

            $event = Get-WinEvent -FilterHashtable @{
                LogName      = "Application"
                ID           = 17111
                ProviderName = $eventSource
            } -MaxEvents 1 -ErrorAction SilentlyContinue

            if (-not $event) { return }

            $path = $event.Properties[0].Value
            $errorLogPath = Split-Path -Path $path
            $errorLogFileName = Split-Path -Path $path -Leaf
            $errorLogFiles = Get-ChildItem -Path $errorLogPath | Where-Object { ($_.Name -like "$errorLogFileName*") -and ($_.LastWriteTime -gt $Start) -and ($_.CreationTime -lt $End) }
            #endregion Gather list of files to process

            #region Prepare Runspaces
            [Collections.Arraylist]$RunspaceCollection = @()

            $InitialSessionState = [System.Management.Automation.Runspaces.InitialSessionState]::CreateDefault()
            $Command = Get-Item function:Convert-ErrorRecord
            $InitialSessionState.Commands.Add((New-Object System.Management.Automation.Runspaces.SessionStateFunctionEntry($command.Name, $command.Definition)))

            $RunspacePool = [RunspaceFactory]::CreateRunspacePool($InitialSessionState)
            $null = $RunspacePool.SetMinRunspaces(1)
            if ($Throttle -gt 0) { $null = $RunspacePool.SetMaxRunspaces($Throttle) }
            $RunspacePool.Open()
            #endregion Prepare Runspaces

            #region Process Error files
            $countDone = 0
            $countStarted = 0
            $countTotal = ($errorLogFiles | Measure-Object).Count

            while ($countDone -lt $countTotal) {
                while (($RunspacePool.GetAvailableRunspaces() -gt 0) -and ($countStarted -lt $countTotal)) {
                    $Powershell = [PowerShell]::Create().AddScript($scriptBlock).AddParameter("File", $errorLogFiles[$countStarted])
                    $Powershell.RunspacePool = $RunspacePool
                    $null = $RunspaceCollection.Add((New-Object -TypeName PSObject -Property @{ Runspace = $PowerShell.BeginInvoke(); PowerShell = $PowerShell }))
                    $countStarted++
                }

                foreach ($Run in $RunspaceCollection.ToArray()) {
                    if ($Run.Runspace.IsCompleted) {
                        $Run.PowerShell.EndInvoke($Run.Runspace) | Where-Object { ($_.Timestamp -gt $Start) -and ($_.Timestamp -lt $End) }
                        $Run.PowerShell.Dispose()
                        $RunspaceCollection.Remove($Run)
                        $countDone++
                    }
                }

                Start-Sleep -Milliseconds 250
            }
            $RunspacePool.Close()
            $RunspacePool.Dispose()
            #endregion Process Error files
        }

        $scriptBlock_ParallelRemoting = {
            param (
                [DbaInstanceParameter]
                $SqlInstance,

                [DateTime]
                $Start,

                [DateTime]
                $End,

                [PSCredential]
                $Credential,

                [int]
                $MaxRemoteThreads,

                [System.Management.Automation.ScriptBlock]
                $ScriptBlock
            )

            $params = @{
                ArgumentList = $Start, $End, $SqlInstance.InstanceName, $MaxRemoteThreads
                ScriptBlock  = $ScriptBlock
            }
            if (-not $SqlInstance.IsLocalhost) { $params["ComputerName"] = $SqlInstance.ComputerName }
            if ($Credential) { $params["Credential"] = $Credential }

            Invoke-Command @params | Select-Object @{ n = "InstanceName"; e = { $SqlInstance.FullSmoName } }, Timestamp, Spid, Severity, ErrorNumber, State, Message
        }
        #endregion Scriptblocks

        #region Setup Runspace
        [Collections.Arraylist]$RunspaceCollection = @()
        $InitialSessionState = [System.Management.Automation.Runspaces.InitialSessionState]::CreateDefault()
        $defaultrunspace = [System.Management.Automation.Runspaces.Runspace]::DefaultRunspace
        $RunspacePool = [RunspaceFactory]::CreateRunspacePool($InitialSessionState)
        $RunspacePool.SetMinRunspaces(1) | Out-Null
        if ($MaxThreads -gt 0) { $null = $RunspacePool.SetMaxRunspaces($MaxThreads) }
        $RunspacePool.Open()

        $countStarted = 0
        #Variable marked as unused by PSScriptAnalyzer
        #$countReceived = 0
        #endregion Setup Runspace
    }

    process {
        foreach ($instance in $SqlInstance) {
            Write-Message -Level VeryVerbose -Message "Processing <c='green'>$instance</c>" -Target $instance
            Start-Runspace
            Receive-Runspace
        }
    }

    end {
        Receive-Runspace -Wait
        $RunspacePool.Close()
        $RunspacePool.Dispose()
        [System.Management.Automation.Runspaces.Runspace]::DefaultRunspace = $defaultrunspace
    }
}

tools\dbatools\functions\Get-DbaWsfcAvailableDisk.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaWsfcAvailableDisk {
    <#
    .SYNOPSIS
        Gets information about the disks that can support Failover Clustering and are visible to all nodes, but are not yet part of the set of clustered disks.

    .DESCRIPTION
        Gets information about the disks that can support Failover Clustering and are visible to all nodes, but are not yet part of the set of clustered disks.

        All Windows Server Failover Clustering (Wsfc) commands require local admin on each member node.

    .PARAMETER ComputerName
        The target cluster name. Can be a node or the cluster name itself.

    .PARAMETER Credential
        Allows you to login to the cluster using alternative credentials.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Cluster, WSFC, FCI, HA
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaWsfcAvailableDisk

    .EXAMPLE
        PS C:\> Get-DbaWsfcAvailableDisk -ComputerName cluster01

        Gets available disks from the failover cluster cluster01

    #>
    [CmdletBinding()]
    param (
        [parameter(ValueFromPipeline)]
        [DbaInstanceParameter[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [switch]$EnableException
    )
    process {
        foreach ($computer in $computername) {
            $cluster = Get-DbaWsfcCluster -ComputerName $computer -Credential $Credential
            $disk = Get-DbaCmObject -Computername $computer -Credential $Credential -Namespace root\MSCluster -ClassName MSCluster_AvailableDisk

            # I don't have an available disk, so I can't see how to clean this up: Passthru
            $disk | Add-Member -Force -NotePropertyName State -NotePropertyValue (Get-ResourceState $resource.State)
            $disk | Add-Member -Force -NotePropertyName ClusterName -NotePropertyValue $cluster.Name
            $disk | Add-Member -Force -NotePropertyName ClusterFqdn -NotePropertyValue $cluster.Fqdn -PassThru
        }
    }
}

tools\dbatools\functions\Get-DbaPowerPlan.ps1

function Get-DbaPowerPlan {
    <#
    .SYNOPSIS
        Gets the Power Plan settings for compliance with best practices, which recommend High Performance for SQL Server.

    .DESCRIPTION
        Gets the Power Plan settings on a computer against best practices recommendations.

    .PARAMETER ComputerName
        The server(s) to check Power Plan settings on.

    .PARAMETER Credential
        Specifies a PSCredential object to use in authenticating to the server(s), instead of the current user account.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: PowerPlan
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaPowerPlan

    .EXAMPLE
        PS C:\> Get-DbaPowerPlan -ComputerName sql2017

        Gets the Power Plan settings for sql2017

    .EXAMPLE
        PS C:\> Get-DbaPowerPlan -ComputerName sql2017 -Credential ad\admin

        Gets the Power Plan settings for sql2017 using an alternative credential

       #>
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "SqlInstance")]
        [DbaInstance[]]$ComputerName,
        [PSCredential]$Credential,
        [switch]$EnableException
    )

    process {
        foreach ($computer in $ComputerName) {
            $server = Resolve-DbaNetworkName -ComputerName $computer -Credential $Credential

            $computerResolved = $server.FullComputerName

            if (-not $computerResolved) {
                Stop-Function -Message "Couldn't resolve hostname. Skipping." -Continue
            }

            $splatDbaCmObject = @{
                ComputerName    = $computerResolved
                EnableException = $true
            }

            if (Test-Bound "Credential") {
                $splatDbaCmObject["Credential"] = $Credential
            }

            Write-Message -Level Verbose -Message "Getting Power Plan information from $computer."

            try {
                $powerPlans = Get-DbaCmObject @splatDbaCmObject -ClassName Win32_PowerPlan -Namespace "root\cimv2\power" | Select-Object ElementName, InstanceId, IsActive
            } catch {
                if ($_.Exception -match "namespace") {
                    Stop-Function -Message "Can't get Power Plan Info for $computer. Unsupported operating system." -Continue -ErrorRecord $_ -Target $computer
                } else {
                    Stop-Function -Message "Can't get Power Plan Info for $computer. Check logs for more details." -Continue -ErrorRecord $_ -Target $computer
                }
            }

            $powerPlan = $powerPlans | Where-Object IsActive -eq 'True' | Select-Object ElementName, InstanceID
            $powerPlan.InstanceID = $powerPlan.InstanceID.Split('{')[1].Split('}')[0]

            if ($null -eq $powerPlan.InstanceID) {
                $powerPlan.ElementName = "Unknown"
            }

            [PSCustomObject]@{
                ComputerName = $computer
                InstanceId   = $powerPlan.InstanceID
                PowerPlan    = $powerPlan.ElementName
                Credential   = $Credential
            } | Select-DefaultView -ExcludeProperty Credential, InstanceId
        }
    }
}

tools\dbatools\functions\Get-DbaPrivilege.ps1

function Get-DbaPrivilege {
    <#
    .SYNOPSIS
        Gets the users with local privileges on one or more computers.

    .DESCRIPTION
        Gets the users with local privileges 'Lock Pages in Memory', 'Instant File Initialization', 'Logon as Batch' on one or more computers.

        Requires Local Admin rights on destination computer(s).

    .PARAMETER ComputerName
        The target SQL Server instance or instances.

    .PARAMETER Credential
        Credential object used to connect to the computer as a different user.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Privilege
        Author: Klaas Vandenberghe (@PowerDBAKlaas)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaPrivilege

    .EXAMPLE
        PS C:\> Get-DbaPrivilege -ComputerName sqlserver2014a

        Gets the local privileges on computer sqlserver2014a.

    .EXAMPLE
        PS C:\> 'sql1','sql2','sql3' | Get-DbaPrivilege

        Gets the local privileges on computers sql1, sql2 and sql3.

    .EXAMPLE
        PS C:\> Get-DbaPrivilege -ComputerName sql1,sql2 | Out-GridView

        Gets the local privileges on computers sql1 and sql2, and shows them in a grid view.

             #>
    [CmdletBinding()]
    param (
        [parameter(ValueFromPipeline)]
        [Alias("cn", "host", "Server")]
        [DbaInstanceParameter[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [switch][Alias('Silent')]
        $EnableException
    )

    begin {
        $ResolveSID = @"
    function Convert-SIDToUserName ([string] `$SID ) {
      `$objSID = New-Object System.Security.Principal.SecurityIdentifier (`"`$SID`")
      `$objUser = `$objSID.Translate( [System.Security.Principal.NTAccount])
      `$objUser.Value
    }
"@
        $ComputerName = $ComputerName.ComputerName | Select-Object -Unique
    }
    process {
        foreach ($computer in $ComputerName) {
            try {
                $null = Test-PSRemoting -ComputerName $Computer -EnableException
            } catch {
                Stop-Function -Message "Failure on $computer" -ErrorRecord $_ -Continue
            }

            try {
                Write-Message -Level Verbose -Message "Getting Privileges on $Computer"
                $Priv = $null
                $Priv = Invoke-Command2 -Raw -ComputerName $computer -Credential $Credential -ScriptBlock {
                    $temp = ([System.IO.Path]::GetTempPath()).TrimEnd(""); secedit /export /cfg $temp\secpolByDbatools.cfg > $NULL;
                    Get-Content $temp\secpolByDbatools.cfg | Where-Object {
                        $_ -match "SeBatchLogonRight" -or $_ -match 'SeManageVolumePrivilege' -or $_ -match 'SeLockMemoryPrivilege'
                    }
                }
                if ($Priv.count -eq 0) {
                    Write-Message -Level Verbose -Message "No users with Batch Logon, Instant File Initialization, or Lock Pages in Memory Rights on $computer"
                }

                Write-Message -Level Verbose -Message "Getting Batch Logon Privileges on $Computer"
                $BL = Invoke-Command2 -Raw -ComputerName $computer -Credential $Credential -ArgumentList $ResolveSID -ScriptBlock {
                    param ($ResolveSID)
                    . ([ScriptBlock]::Create($ResolveSID))
                    $temp = ([System.IO.Path]::GetTempPath()).TrimEnd("");
                    $blEntries = (Get-Content $temp\secpolByDbatools.cfg | Where-Object {
                            $_ -like "SeBatchLogonRight*"
                        })

                    if ($null -ne $blEntries) {
                        $blEntries.substring(20).split(",").replace("`*", "") | ForEach-Object {
                            Convert-SIDToUserName -SID $_
                        }
                    }

                } -ErrorAction SilentlyContinue
                if ($BL.count -eq 0) {
                    Write-Message -Level Verbose -Message "No users with Batch Logon Rights on $computer"
                }

                Write-Message -Level Verbose -Message "Getting Instant File Initialization Privileges on $Computer"
                $ifi = Invoke-Command2 -Raw -ComputerName $computer -Credential $Credential -ArgumentList $ResolveSID -ScriptBlock {
                    param ($ResolveSID)
                    . ([ScriptBlock]::Create($ResolveSID))
                    $temp = ([System.IO.Path]::GetTempPath()).TrimEnd("");
                    $ifiEntries = (Get-Content $temp\secpolByDbatools.cfg | Where-Object {
                            $_ -like 'SeManageVolumePrivilege*'
                        })

                    if ($null -ne $ifiEntries) {
                        $ifiEntries.substring(26).split(",").replace("`*", "") | ForEach-Object {
                            Convert-SIDToUserName -SID $_
                        }
                    }

                } -ErrorAction SilentlyContinue
                if ($ifi.count -eq 0) {
                    Write-Message -Level Verbose -Message "No users with Instant File Initialization Rights on $computer"
                }

                Write-Message -Level Verbose -Message "Getting Lock Pages in Memory Privileges on $Computer"
                $lpim = Invoke-Command2 -Raw -ComputerName $computer -Credential $Credential -ArgumentList $ResolveSID -ScriptBlock {
                    param ($ResolveSID)
                    . ([ScriptBlock]::Create($ResolveSID))
                    $temp = ([System.IO.Path]::GetTempPath()).TrimEnd("");
                    $lpimEntries = (Get-Content $temp\secpolByDbatools.cfg | Where-Object {
                            $_ -like 'SeLockMemoryPrivilege*'
                        })

                    if ($null -ne $lpimEntries) {
                        $lpimEntries.substring(24).split(",").replace("`*", "") | ForEach-Object {
                            Convert-SIDToUserName -SID $_
                        }
                    }
                } -ErrorAction SilentlyContinue

                if ($lpim.count -eq 0) {
                    Write-Message -Level Verbose -Message "No users with Lock Pages in Memory Rights on $computer"
                }
                $users = @() + $BL + $ifi + $lpim | Select-Object -Unique
                $users | ForEach-Object {
                    [PSCustomObject]@{
                        ComputerName              = $computer
                        User                      = $_
                        LogonAsBatch              = $BL -contains $_
                        InstantFileInitialization = $ifi -contains $_
                        LockPagesInMemory         = $lpim -contains $_
                    }
                }
                Write-Message -Level Verbose -Message "Removing secpol file on $computer"
                Invoke-Command2 -Raw -ComputerName $computer -Credential $Credential -ScriptBlock {
                    $temp = ([System.IO.Path]::GetTempPath()).TrimEnd(""); Remove-Item $temp\secpolByDbatools.cfg -Force > $NULL
                }
            } catch {
                Stop-Function -Continue -Message "Failure" -ErrorRecord $_ -Target $computer
            }
        }
    }
}

tools\dbatools\functions\Get-DbaProcess.ps1

function Get-DbaProcess {
    <#
    .SYNOPSIS
        This command displays SQL Server processes.

    .DESCRIPTION
        This command displays processes associated with a spid, login, host, program or database.

        Thanks to Michael J Swart at https://sqlperformance.com/2017/07/sql-performance/find-database-connection-leaks for the query to get the last executed SQL statement, minutesasleep and host process ID.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Spid
        Specifies one or more process IDs (Spid) to be displayed. Options for this parameter are auto-populated from the server.

    .PARAMETER Login
        Specifies one or more Login names with active processes to look for. Options for this parameter are auto-populated from the server.

    .PARAMETER Hostname
        Specifies one or more hostnames with active processes to look for. Options for this parameter are auto-populated from the server.

    .PARAMETER Program
        Specifies one or more program names with active processes to look for. Options for this parameter are auto-populated from the server.

    .PARAMETER Database
        Specifies one or more databases with active processes to look for. Options for this parameter are auto-populated from the server.

    .PARAMETER ExcludeSpid
        Specifies one ore more process IDs to exclude from display. Options for this parameter are auto-populated from the server.

        This is the last filter to run, so even if a Spid matches another filter, it will be excluded by this filter.

    .PARAMETER ExcludeSystemSpids
        If this switch is enabled, system Spids will be ignored.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Process, Session, ActivityMonitor
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaProcess

    .EXAMPLE
        PS C:\> Get-DbaProcess -SqlInstance sqlserver2014a -Login base\ctrlb, sa

        Shows information about the processes for base\ctrlb and sa on sqlserver2014a. Windows Authentication is used in connecting to sqlserver2014a.

    .EXAMPLE
        PS C:\> Get-DbaProcess -SqlInstance sqlserver2014a -SqlCredential $credential -Spid 56, 77

        Shows information about the processes for spid 56 and 57. Uses alternative (SQL or Windows) credentials to authenticate to sqlserver2014a.

    .EXAMPLE
        PS C:\> Get-DbaProcess -SqlInstance sqlserver2014a -Program 'Microsoft SQL Server Management Studio'

        Shows information about the processes that were created in Microsoft SQL Server Management Studio.

    .EXAMPLE
        PS C:\> Get-DbaProcess -SqlInstance sqlserver2014a -Host workstationx, server100

        Shows information about the processes that were initiated by hosts (computers/clients) workstationx and server 1000.

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [int[]]$Spid,
        [int[]]$ExcludeSpid,
        [string[]]$Database,
        [string[]]$Login,
        [string[]]$Hostname,
        [string[]]$Program,
        [switch]$ExcludeSystemSpids,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ($instance in $sqlinstance) {

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Could not connect to Sql Server instance $instance : $_" -Target $instance -ErrorRecord $_ -Continue
            }

            $sql = "SELECT DATEDIFF(MINUTE, s.last_request_end_time, GETDATE()) AS MinutesAsleep,
                s.session_id AS spid,
                s.host_process_id AS HostProcessId,
                t.text AS Query,
                s.login_time AS LoginTime,
                s.client_version AS ClientVersion,
                s.last_request_start_time AS LastRequestStartTime,
                s.last_request_end_time AS LastRequestEndTime,
                c.net_transport AS NetTransport,
                c.encrypt_option AS EncryptOption,
                c.auth_scheme AS AuthScheme,
                c.net_packet_size AS NetPacketSize,
                c.client_net_address AS ClientNetAddress
            FROM sys.dm_exec_connections c
            JOIN sys.dm_exec_sessions s
                on c.session_id = s.session_id
            CROSS APPLY sys.dm_exec_sql_text(c.most_recent_sql_handle) t"

            if ($server.VersionMajor -gt 8) {
                $results = $server.Query($sql)
            } else {
                $results = $null
            }

            $allsessions = @()

            $processes = $server.EnumProcesses()

            if ($Login) {
                $allsessions += $processes | Where-Object { $_.Login -in $Login -and $_.Spid -notin $allsessions.Spid }
            }

            if ($Spid) {
                $allsessions += $processes | Where-Object { ($_.Spid -in $Spid -or $_.BlockingSpid -in $Spid) -and $_.Spid -notin $allsessions.Spid }
            }

            if ($Hostname) {
                $allsessions += $processes | Where-Object { $_.Host -in $Hostname -and $_.Spid -notin $allsessions.Spid }
            }

            if ($Program) {
                $allsessions += $processes | Where-Object { $_.Program -in $Program -and $_.Spid -notin $allsessions.Spid }
            }

            if ($Database) {
                $allsessions += $processes | Where-Object { $Database -contains $_.Database -and $_.Spid -notin $allsessions.Spid }
            }

            if (Test-Bound -not 'Login', 'Spid', 'ExcludeSpid', 'Hostname', 'Program', 'Database') {
                $allsessions = $processes
            }

            if ($ExcludeSystemSpids -eq $true) {
                $allsessions = $allsessions | Where-Object { $_.Spid -gt 50 }
            }

            if ($Exclude) {
                $allsessions = $allsessions | Where-Object { $Exclude -notcontains $_.SPID -and $_.Spid -notin $allsessions.Spid }
            }

            foreach ($session in $allsessions) {

                if ($session.Status -eq "") {
                    $status = "sleeping"
                } else {
                    $status = $session.Status
                }

                if ($session.Command -eq "") {
                    $command = "AWAITING COMMAND"
                } else {
                    $command = $session.Command
                }

                $row = $results | Where-Object { $_.Spid -eq $session.Spid }

                Add-Member -Force -InputObject $session -MemberType NoteProperty -Name Parent -value $server
                Add-Member -Force -InputObject $session -MemberType NoteProperty -Name ComputerName -value $server.ComputerName
                Add-Member -Force -InputObject $session -MemberType NoteProperty -Name InstanceName -value $server.ServiceName
                Add-Member -Force -InputObject $session -MemberType NoteProperty -Name SqlInstance -value $server.DomainInstanceName
                Add-Member -Force -InputObject $session -MemberType NoteProperty -Name Status -value $status
                Add-Member -Force -InputObject $session -MemberType NoteProperty -Name Command -value $command
                Add-Member -Force -InputObject $session -MemberType NoteProperty -Name HostProcessId -value $row.HostProcessId
                Add-Member -Force -InputObject $session -MemberType NoteProperty -Name MinutesAsleep -value $row.MinutesAsleep
                Add-Member -Force -InputObject $session -MemberType NoteProperty -Name LoginTime -value $row.LoginTime
                Add-Member -Force -InputObject $session -MemberType NoteProperty -Name ClientVersion -value $row.ClientVersion
                Add-Member -Force -InputObject $session -MemberType NoteProperty -Name LastRequestStartTime -value $row.LastRequestStartTime
                Add-Member -Force -InputObject $session -MemberType NoteProperty -Name LastRequestEndTime -value $row.LastRequestEndTime
                Add-Member -Force -InputObject $session -MemberType NoteProperty -Name NetTransport -value $row.NetTransport
                Add-Member -Force -InputObject $session -MemberType NoteProperty -Name EncryptOption -value $row.EncryptOption
                Add-Member -Force -InputObject $session -MemberType NoteProperty -Name AuthScheme -value $row.AuthScheme
                Add-Member -Force -InputObject $session -MemberType NoteProperty -Name NetPacketSize -value $row.NetPacketSize
                Add-Member -Force -InputObject $session -MemberType NoteProperty -Name ClientNetAddress -value $row.ClientNetAddress
                Add-Member -Force -InputObject $session -MemberType NoteProperty -Name LastQuery -value $row.Query

                Select-DefaultView -InputObject $session -Property ComputerName, InstanceName, SqlInstance, Spid, Login, LoginTime, Host, Database, BlockingSpid, Program, Status, Command, Cpu, MemUsage, LastRequestStartTime, LastRequestEndTime, MinutesAsleep, ClientNetAddress, NetTransport, EncryptOption, AuthScheme, NetPacketSize, ClientVersion, HostProcessId, IsSystem, LastQuery
            }
        }
    }
}

tools\dbatools\functions\Get-DbaProductKey.ps1

#ValidationTags#CodeStyle,Messaging,FlowControl,Pipeline#
function Get-DbaProductKey {
    <#
    .SYNOPSIS
        Gets SQL Server Product Keys from local or destination SQL Servers. Works with SQL Server 2005-2017

    .DESCRIPTION
        This command find the product key for all installed instances. Clustered instances are supported as well.

        Uses key decoder by Jakob Bindslet (http://goo.gl/1jiwcB)

    .PARAMETER ComputerName
        The target SQL Server instance or instances.

    .PARAMETER Credential
        Login to the target Windows instance using alternative credentials. Windows Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER SqlCredential
        This command logs into the SQL instance to gather additional information.

        Use this parameter to connect to the discovered SQL instances using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: ProductKey
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaProductKey

    .EXAMPLE
        PS C:\> Get-DbaProductKey -ComputerName winxp, sqlservera, sqlserver2014a, win2k8

        Gets SQL Server versions, editions and product keys for all instances within each server or workstation.

    #>
    [CmdletBinding()]
    param (
        [parameter(ValueFromPipeline, Mandatory)]
        [Alias("SqlInstance")]
        [DbaInstanceParameter[]]$ComputerName,
        [PSCredential]$SqlCredential,
        [PSCredential]$Credential,
        [switch]$EnableException
    )

    begin {
        $scriptblock = {
            $versionMajor = $args[0]
            $instanceReg = $args[1]
            $edition = $args[2]

            Function Unlock-SqlInstanceKey {
                [CmdletBinding()]
                param (
                    [Parameter(Mandatory)]
                    [byte[]]$data,
                    [int]$version
                )
                try {
                    if ($version -ge 11) {
                        $binArray = ($data)[0 .. 66]
                    } else {
                        $binArray = ($data)[52 .. 66]
                    }
                    $charsArray = "B", "C", "D", "F", "G", "H", "J", "K", "M", "P", "Q", "R", "T", "V", "W", "X", "Y", "2", "3", "4", "6", "7", "8", "9"
                    for ($i = 24; $i -ge 0; $i--) {
                        $k = 0
                        for ($j = 14; $j -ge 0; $j--) {
                            $k = $k * 256 -bxor $binArray[$j]
                            $binArray[$j] = [math]::truncate($k / 24)
                            $k = $k % 24
                        }
                        $productKey = $charsArray[$k] + $productKey
                        if (($i % 5 -eq 0) -and ($i -ne 0)) {
                            $productKey = "-" + $productKey
                        }
                    }
                } catch {
                    $productkey = "Cannot decode product key."
                }
                return $productKey
            }
            $localmachine = [Microsoft.Win32.RegistryHive]::LocalMachine
            $defaultview = [Microsoft.Win32.RegistryView]::Default
            $reg = [Microsoft.Win32.RegistryKey]::OpenBaseKey($localmachine, $defaultview)

            switch ($versionMajor) {
                9 {
                    $sqlversion = "SQL Server 2005 $servicePack"
                    $findkeys = $reg.OpenSubKey("$($instanceReg.Path)\ProductID", $false)
                    foreach ($findkey in $findkeys.GetValueNames()) {
                        if ($findkey -like "DigitalProductID*") {
                            $key = @("$($instanceReg.Path)\ProductID\$findkey")
                        }
                    }
                }
                10 {
                    $sqlversion = "SQL Server 2008 $servicePack"
                    if ($server.VersionMinor -eq 50) {
                        $sqlversion = "SQL Server 2008 R2 $servicePack"
                    }
                    $key = @("$($instanceReg.Path)\Setup\DigitalProductID")
                }
                11 {
                    $key = @("$($instanceReg.Path)\Setup\DigitalProductID", "$($instanceReg.Path)\ClientSetup\DigitalProductID")
                    $sqlversion = "SQL Server 2012 $servicePack"
                }
                12 {
                    $key = @("$($instanceReg.Path)\Setup\DigitalProductID", "$($instanceReg.Path)\ClientSetup\DigitalProductID")
                    $sqlversion = "SQL Server 2014 $servicePack"
                }
                13 {
                    $key = @("$($instanceReg.Path)\Setup\DigitalProductID", "$($instanceReg.Path)\ClientSetup\DigitalProductID")
                    $sqlversion = "SQL Server 2016 $servicePack"
                }
                14 {
                    $key = @("$($instanceReg.Path)\Setup\DigitalProductID", "$($instanceReg.Path)\ClientSetup\DigitalProductID")
                    $sqlversion = "SQL Server 2017 $servicePack"
                }
                default {
                    Stop-Function -Message "SQL version not currently supported." -Continue
                }
            }
            if ($edition -notlike "*Express*") {
                $sqlkey = ''
                foreach ($k in $key) {
                    $subkey = Split-Path $k
                    $binaryvalue = Split-Path $k -Leaf
                    try {
                        $binarykey = $($reg.OpenSubKey($subkey)).GetValue($binaryvalue)
                        break
                    } catch {
                        $binarykey = $null
                    }
                }

                if ($null -eq $binarykey) {
                    $sqlkey = "Could not read Product Key from registry on $env:COMPUTERNAME"
                } else {
                    try {
                        $sqlkey = Unlock-SqlInstanceKey $binarykey $versionMajor
                    } catch {
                        $sqlkey = "Unable to unlock key"
                    }
                }
            } else {
                $sqlkey = "SQL Server Express Edition"
            }

            [pscustomobject]@{
                Version = $sqlversion
                Key     = $sqlkey
            }
            $reg.Close()
        }
    }

    process {
        foreach ($computer in $ComputerName) {
            try {
                $registryroot = Get-DbaRegistryRoot -ComputerName $computer.ComputerName -EnableException
            } catch {
                Stop-Function -Message "Can't access registry for $($computer.ComputerName). Is the Remote Registry service started?" -Continue
            }

            if (-not $registryroot) {
                Stop-Function -Message "No instances found on $($computer.ComputerName)" -Continue
            }

            # Get Product Keys for all instances on the server.
            foreach ($instanceReg in $registryroot) {
                try {
                    $server = Connect-SqlInstance -SqlInstance $instanceReg.SqlInstance -SqlCredential $SqlCredential -MinimumVersion 10
                } catch {
                    Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instanceReg.SqlInstance -Continue
                }

                $servicePack = $server.ProductLevel
                $versionMajor = $server.VersionMajor
                Write-Message -Level Debug -Message "$instance $instanceName version is $($server.VersionMajor)"

                try {
                    $results = Invoke-Command2 -ComputerName $computer.ComputerName -Credential $Credential -ScriptBlock $scriptblock -ArgumentList $server.VersionMajor, $instanceReg, $server.Edition
                } catch {
                    Stop-Function -Message "Failure" -ErrorRecord $_
                }

                [pscustomobject]@{
                    ComputerName = $server.ComputerName
                    InstanceName = $server.ServiceName
                    SqlInstance  = $server.DomainInstanceName
                    Version      = $results.Version
                    Edition      = $server.Edition
                    Key          = $results.Key
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Get-SqlServerKey
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Get-DbaSqlProductKey
    }
}

tools\dbatools\functions\Get-DbaQueryExecutionTime.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaQueryExecutionTime {
    <#
    .SYNOPSIS
        Displays Stored Procedures and Ad hoc queries with the highest execution times.  Works on SQL Server 2008 and above.

    .DESCRIPTION
        Quickly find slow query executions within a database.  Results will include stored procedures and individual SQL statements.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto-populated from the server

    .PARAMETER MaxResultsPerDb
        Allows you to limit the number of results returned, as many systems can have very large amounts of query plans.  Default value is 100 results.

    .PARAMETER MinExecs
        Allows you to limit the scope to queries that have been executed a minimum number of time. Default value is 100 executions.

    .PARAMETER MinExecMs
        Allows you to limit the scope to queries with a specified average execution time.  Default value is 500 (ms).

    .PARAMETER ExcludeSystem
        Allows you to suppress output on system databases

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Query, Performance
        Author: Brandon Abshire, netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaQueryExecutionTime

    .EXAMPLE
        PS C:\> Get-DbaQueryExecutionTime -SqlInstance sql2008, sqlserver2012

        Return the top 100 slowest stored procedures or statements for servers sql2008 and sqlserver2012.

    .EXAMPLE
        PS C:\> Get-DbaQueryExecutionTime -SqlInstance sql2008 -Database TestDB

        Return the top 100 slowest stored procedures or statements on server sql2008 for only the TestDB database.

    .EXAMPLE
        PS C:\> Get-DbaQueryExecutionTime -SqlInstance sql2008 -Database TestDB -MaxResultsPerDb 100 -MinExecs 200 -MinExecMs 1000

        Return the top 100 slowest stored procedures or statements on server sql2008 for only the TestDB database, limiting results to queries with more than 200 total executions and an execution time over 1000ms or higher.

    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "SqlServers")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]
        $SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [parameter(Position = 1)]
        [int]$MaxResultsPerDb = 100,
        [parameter(Position = 2)]
        [int]$MinExecs = 100,
        [parameter(Position = 3)]
        [int]$MinExecMs = 500,
        [parameter(Position = 4)]
        [Alias("ExcludeSystemDatabases")]
        [switch]$ExcludeSystem,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        $sql = ";With StatsCTE AS
            (
                SELECT
                    DB_NAME() as DatabaseName,
                    (total_worker_time / execution_count) / 1000 AS AvgExec_ms ,
                    execution_count ,
                    max_worker_time / 1000 AS MaxExec_ms ,
                    OBJECT_NAME(object_id) as ProcName,
                    object_id,
                    type_desc,
                    cached_time,
                    last_execution_time,
                    total_worker_time / 1000 as total_worker_time_ms,
                    total_elapsed_time / 1000 as total_elapsed_time_ms,
                    OBJECT_NAME(object_id) as SQLText,
                    OBJECT_NAME(object_id) as full_statement_text
                FROM    sys.dm_exec_procedure_stats
                WHERE   database_id = DB_ID()"

        if ($MinExecs) { $sql += "`n AND execution_count >= " + $MinExecs }
        if ($MinExecMs) { $sql += "`n AND (total_worker_time / execution_count) / 1000 >= " + $MinExecMs }

        $sql += "`n UNION
            SELECT
                DB_NAME() as DatabaseName,
                ( qs.total_worker_time / qs.execution_count ) / 1000 AS AvgExec_ms ,
                qs.execution_count ,
                qs.max_worker_time / 1000 AS MaxExec_ms ,
                OBJECT_NAME(st.objectid) as ProcName,
                   st.objectid as [object_id],
                   'STATEMENT' as type_desc,
                   '1901-01-01 00:00:00' as cached_time,
                    qs.last_execution_time,
                    qs.total_worker_time / 1000 as total_worker_time_ms,
                    qs.total_elapsed_time / 1000 as total_elapsed_time_ms,
                    SUBSTRING(st.text, (qs.statement_start_offset/2)+1, 50) + '...' AS SQLText,
                    SUBSTRING(st.text, (qs.statement_start_offset/2)+1,
                        ((CASE qs.statement_end_offset
                          WHEN -1 THEN DATALENGTH(st.text)
                         ELSE qs.statement_end_offset
                         END - qs.statement_start_offset)/2) + 1) AS full_statement_text
            FROM    sys.dm_exec_query_stats qs
            CROSS APPLY sys.dm_exec_plan_attributes(qs.plan_handle) as pa
            CROSS APPLY sys.dm_exec_sql_text(qs.sql_handle) as st
            WHERE st.dbid = DB_ID() OR (pa.attribute = 'dbid' and pa.value = DB_ID())"

        if ($MinExecs) { $sql += "`n AND execution_count >= " + $MinExecs }
        if ($MinExecMs) { $sql += "`n AND (total_worker_time / execution_count) / 1000 >= " + $MinExecMs }

        if ($MaxResultsPerDb) { $sql += ")`n SELECT TOP " + $MaxResultsPerDb }
        else {
            $sql += ")
                        SELECT "
        }

        $sql += "`n     DatabaseName,
                        AvgExec_ms,
                        execution_count,
                        MaxExec_ms,
                        ProcName,
                        object_id,
                        type_desc,
                        cached_time,
                        last_execution_time,
                        total_worker_time_ms,
                        total_elapsed_time_ms,
                        SQLText,
                        full_statement_text
                    FROM StatsCTE "

        if ($MinExecs -or $MinExecMs) {
            $sql += "`n WHERE `n"

            if ($MinExecs) {
                $sql += " execution_count >= " + $MinExecs
            }

            if ($MinExecMs -gt 0 -and $MinExecs) {
                $sql += "`n AND AvgExec_ms >= " + $MinExecMs
            } elseif ($MinExecMs) {
                $sql += "`n AvgExecs_ms >= " + $MinExecMs
            }
        }

        $sql += "`n ORDER BY AvgExec_ms DESC"
    }
    process {
        if (!$MaxResultsPerDb -and !$MinExecs -and !$MinExecMs) {
            Write-Message -Level Warning -Message "Results may take time, depending on system resources and size of buffer cache."
            Write-Message -Level Warning -Message "Consider limiting results using -MaxResultsPerDb, -MinExecs and -MinExecMs parameters."
        }

        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 10
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $dbs = $server.Databases
            if ($Database) {
                $dbs = $dbs | Where-Object Name -In $Database
            }

            if ($ExcludeSystem) {
                $dbs = $dbs | Where-Object { $_.IsSystemObject -eq $false }
            }

            if ($ExcludeDatabase) {
                $dbs = $dbs | Where-Object Name -NotIn $ExcludeDatabase
            }

            foreach ($db in $dbs) {
                Write-Message -Level Verbose -Message "Processing $db on $instance"

                if ($db.IsAccessible -eq $false) {
                    Write-Message -Level Warning -Message "The database $db is not accessible. Skipping database."
                    continue
                }

                try {
                    foreach ($row in $db.ExecuteWithResults($sql).Tables.Rows) {
                        [PSCustomObject]@{
                            ComputerName       = $server.ComputerName
                            InstanceName       = $server.ServiceName
                            SqlInstance        = $server.DomainInstanceName
                            Database           = $row.DatabaseName
                            ProcName           = $row.ProcName
                            ObjectID           = $row.object_id
                            TypeDesc           = $row.type_desc
                            Executions         = $row.Execution_Count
                            AvgExecMs          = $row.AvgExec_ms
                            MaxExecMs          = $row.MaxExec_ms
                            CachedTime         = $row.cached_time
                            LastExecTime       = $row.last_execution_time
                            TotalWorkerTimeMs  = $row.total_worker_time_ms
                            TotalElapsedTimeMs = $row.total_elapsed_time_ms
                            SQLText            = $row.SQLText
                            FullStatementText  = $row.full_statement_text
                        } | Select-DefaultView -ExcludeProperty FullStatementText
                    }
                } catch {
                    Stop-Function -Message "Could not process $db on $instance" -Target $db -ErrorRecord $_ -Continue
                }
            }
        }
    }
}

tools\dbatools\functions\Get-DbaRepDistributor.ps1

function Get-DbaRepDistributor {
    <#
    .SYNOPSIS
        Gets the information about a replication distributor for a given SQL Server instance.

    .DESCRIPTION
        This function locates and enumerates distributor information for a given SQL Server instance.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Replication
        Author: William Durkin (@sql_williamd)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaRepDistributor

    .EXAMPLE
        PS C:\> Get-DbaRepDistributor -SqlInstance sql2008, sqlserver2012

        Retrieve distributor information for servers sql2008 and sqlserver2012.

    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "SqlServers")]
        [DbaInstanceParameter[]]$SqlInstance,
        [parameter(Position = 1)]
        [PSCredential]$SqlCredential,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {
        if ($null -eq [System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SqlServer.RMO")) {
            Stop-Function -Message "Replication management objects not available. Please install SQL Server Management Studio."
        }
    }

    process {
        if (Test-FunctionInterrupt) { return }

        foreach ($instance in $SqlInstance) {

            # connect to the instance
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            Write-Message -Level Verbose -Message "Attempting to retrieve distributor information from $instance"

            # Connect to the distributor of the instance
            try {
                $sourceSqlConn = $server.ConnectionContext.SqlConnectionObject
                $distributor = New-Object Microsoft.SqlServer.Replication.ReplicationServer $sourceSqlConn
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            Add-Member -Force -InputObject $distributor -MemberType NoteProperty -Name ComputerName -Value $server.ComputerName
            Add-Member -Force -InputObject $distributor -MemberType NoteProperty -Name InstanceName -Value $server.ServiceName
            Add-Member -Force -InputObject $distributor -MemberType NoteProperty -Name SqlInstance -Value $server.DomainInstanceName

            Select-DefaultView -InputObject $distributor -Property ComputerName, InstanceName, SqlInstance, IsPublisher, IsDistributor, DistributionServer, DistributionDatabase, DistributorInstalled, DistributorAvailable, HasRemotePublisher
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Get-DbaDistributor
    }
}

tools\dbatools\functions\Get-DbaRepPublication.ps1

function Get-DbaRepPublication {
    <#
    .SYNOPSIS
        Displays all publications for a server or database.

    .DESCRIPTION
        Quickly find all transactional, merge, and snapshot publications on a specific server or database.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER Database
        The database(s) to process. If unspecified, all databases will be processed.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER PublicationType
        Limit by specific type of publication. Valid choices include: Transactional, Merge, Snapshot

    .PARAMETER EnableException
        byng this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Replication
        Author: Colin Douglas

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaRepPublication

    .EXAMPLE
        PS C:\> Get-DbaRepPublication -SqlInstance sql2008, sqlserver2012

        Return all publications for servers sql2008 and sqlserver2012.

    .EXAMPLE
        PS C:\> Get-DbaRepPublication -SqlInstance sql2008 -Database TestDB

        Return all publications on server sql2008 for only the TestDB database

    .EXAMPLE
        PS C:\> Get-DbaRepPublication -SqlInstance sql2008 -PublicationType Transactional

        Return all publications on server sql2008 for all databases that have Transactional publications

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [DbaInstanceParameter[]]$SqlInstance,
        [object[]]$Database,
        [PSCredential]$SqlCredential,
        [ValidateSet("Transactional", "Merge", "Snapshot")]
        [object[]]$PublicationType,
        [switch]$EnableException
    )

    process {

        foreach ($instance in $SqlInstance) {

            # Connect to Publisher
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $dbList = $server.Databases

            if ($Database) {
                $dbList = $dbList | Where-Object name -in $Database
            }

            $dbList = $dbList | Where-Object { ($_.ID -gt 4) -and ($_.status -ne "Offline") }


            foreach ($db in $dbList) {

                if (($db.ReplicationOptions -ne "Published") -and ($db.ReplicationOptions -ne "MergePublished")) {
                    Write-Message -Level Verbose -Message "Skipping $($db.name). Database is not published."
                }

                $repDB = Connect-ReplicationDB -Server $server -Database $db

                $pubTypes = $repDB.TransPublications + $repDB.MergePublications

                if ($PublicationType) {
                    $pubTypes = $pubTypes | Where-Object Type -in $PublicationType
                }

                foreach ($pub in $pubTypes) {

                    [PSCustomObject]@{
                        ComputerName    = $server.ComputerName
                        InstanceName    = $server.InstanceName
                        SqlInstance     = $server.SqlInstance
                        Server          = $server.name
                        Database        = $db.name
                        PublicationName = $pub.Name
                        PublicationType = $pub.Type
                    }
                }
            }
        }
    }
}

tools\dbatools\functions\Get-DbaRepServer.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaRepServer {
    <#
    .SYNOPSIS
        Gets a replication server object

    .DESCRIPTION
        Gets a replication server object

    .PARAMETER SqlInstance
        The target SQL Server instance or instances

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Replication
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Get-DbaRepServer -SqlInstance sql2016

        Gets the replication server object for sql2016 using Windows authentication

    .EXAMPLE
        PS C:\> Get-DbaRepServer -SqlInstance sql2016 -SqlCredential repadmin

        Gets the replication server object for sql2016 using SQL authentication

    #>
    [CmdletBinding()]
    param (
        [Parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
                New-Object Microsoft.SqlServer.Replication.ReplicationServer $server.ConnectionContext.SqlConnectionObject
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }
        }
    }
}

tools\dbatools\functions\Get-DbaResourceGovernor.ps1

function Get-DbaResourceGovernor {
    <#
    .SYNOPSIS
        Gets the Resource Governor object

    .DESCRIPTION
        Gets the Resource Governor object

    .PARAMETER SqlInstance
        The target SQL Server instance or instances

    .PARAMETER SqlCredential
        Allows you to login to SQL Server using alternative credentials

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: ResourceGovernor
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaResourceGovernor

    .EXAMPLE
        PS C:\> Get-DbaResourceGovernor -SqlInstance sql2016

        Gets the resource governor object of the SqlInstance sql2016

    .EXAMPLE
        PS C:\> 'Sql1','Sql2/sqlexpress' | Get-DbaResourceGovernor

        Gets the resource governor object on Sql1 and Sql2/sqlexpress instances

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential -MinimumVersion 10
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $resourcegov = $server.ResourceGovernor

            if ($resourcegov) {
                Add-Member -Force -InputObject $resourcegov -MemberType NoteProperty -Name ComputerName -value $server.ComputerName
                Add-Member -Force -InputObject $resourcegov -MemberType NoteProperty -Name InstanceName -value $server.ServiceName
                Add-Member -Force -InputObject $resourcegov -MemberType NoteProperty -Name SqlInstance -value $server.DomainInstanceName
            }

            Select-DefaultView -InputObject $resourcegov -Property ComputerName, InstanceName, SqlInstance, ClassifierFunction, Enabled, MaxOutstandingIOPerVolume, ReconfigurePending, ResourcePools, ExternalResourcePools
        }
    }
}

tools\dbatools\functions\Get-DbaRgClassifierFunction.ps1

function Get-DbaRgClassifierFunction {
    <#
    .SYNOPSIS
        Gets the Resource Governor custom classifier Function

    .DESCRIPTION
        Gets the Resource Governor custom classifier Function which is used for customize the workload groups usage

    .PARAMETER SqlInstance
        The target SQL Server instance or instances

    .PARAMETER SqlCredential
        Allows you to login to SQL Server using alternative credentials

    .PARAMETER InputObject
        Allows input to be piped from Get-DbaResourceGovernor

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Migration, ResourceGovernor
        Author: Alessandro Alpi (@suxstellino), alessandroalpi.blog

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaRgClassifierFunction

    .EXAMPLE
        PS C:\> Get-DbaRgClassifierFunction -SqlInstance sql2016

        Gets the classifier function from sql2016

    .EXAMPLE
        PS C:\> 'Sql1','Sql2/sqlexpress' | Get-DbaResourceGovernor | Get-DbaRgClassifierFunction

        Gets the classifier function object on Sql1 and Sql2/sqlexpress instances

    #>
    [CmdletBinding()]
    param (
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.ResourceGovernor[]]$InputObject,
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            $InputObject += Get-DbaResourceGovernor -SqlInstance $SqlInstance -SqlCredential $SqlCredential
        }

        foreach ($resourcegov in $InputObject) {
            $server = $resourcegov.Parent
            $classifierFunction = $null

            foreach ($currentFunction in $server.Databases["master"].UserDefinedFunctions) {
                $fullyQualifiedFunctionName = [string]::Format("[{0}].[{1}]", $currentFunction.Schema, $currentFunction.Name)
                if ($fullyQualifiedFunctionName -eq $InputObject.ClassifierFunction) {
                    $classifierFunction = $currentFunction
                }
            }

            if ($classifierFunction) {
                Add-Member -Force -InputObject $classifierFunction -MemberType NoteProperty -Name ComputerName -value $resourcegov.ComputerName
                Add-Member -Force -InputObject $classifierFunction -MemberType NoteProperty -Name InstanceName -value $resourcegov.InstanceName
                Add-Member -Force -InputObject $classifierFunction -MemberType NoteProperty -Name SqlInstance -value $resourcegov.SqlInstance
                Add-Member -Force -InputObject $classifierFunction -MemberType NoteProperty -Name Database -value 'master'
            }

            Select-DefaultView -InputObject $classifierFunction -Property ComputerName, InstanceName, SqlInstance, Database, Schema, CreateDate, DateLastModified, Name, DataType
        }
    }
}

tools\dbatools\functions\Get-DbaRgWorkloadGroup.ps1

function Get-DbaRgWorkloadGroup {
    <#
    .SYNOPSIS
        Gets all Resource Governor Pool objects, including both internal and external

    .DESCRIPTION
        Gets all Resource Governor Pool objects, including both internal and external

    .PARAMETER SqlInstance
        The target SQL Server instance or instances

    .PARAMETER SqlCredential
        Allows you to login to SQL Server using alternative credentials

    .PARAMETER InputObject
        Allows input to be piped from Get-DbaRgResourcePool

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: ResourceGovernor
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaRgWorkloadGroup

    .EXAMPLE
        PS C:\> Get-DbaRgWorkloadGroup -SqlInstance sql2017

        Gets the workload groups on sql2017

    .EXAMPLE
        PS C:\> Get-DbaResourceGovernor -SqlInstance sql2017 | Get-DbaRgResourcePool | Get-DbaRgWorkloadGroup

        Gets the workload groups on sql2017

    #>
    [CmdletBinding()]
    param (
        [parameter(ValueFromPipeline)]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.ResourcePool[]]$InputObject,
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            $InputObject += Get-DbaRgResourcePool -SqlInstance $SqlInstance -SqlCredential $SqlCredential
        }

        foreach ($pool in $InputObject) {
            $group = $pool.WorkloadGroups
            if ($group) {
                $group | Add-Member -Force -MemberType NoteProperty -Name ComputerName -value $pool.ComputerName
                $group | Add-Member -Force -MemberType NoteProperty -Name InstanceName -value $pool.InstanceName
                $group | Add-Member -Force -MemberType NoteProperty -Name SqlInstance -value $pool.SqlInstance
                $group | Select-DefaultView -Property ComputerName, InstanceName, SqlInstance, Id, Name, ExternalResourcePoolName, GroupMaximumRequests, Importance, IsSystemObject, MaximumDegreeOfParallelism, RequestMaximumCpuTimeInSeconds, RequestMaximumMemoryGrantPercentage, RequestMemoryGrantTimeoutInSeconds
            }
        }
    }
}

tools\dbatools\functions\Get-DbaRunningJob.ps1

#ValidationTags#CodeStyle,Messaging,FlowControl,Pipeline#
function Get-DbaRunningJob {
    <#
    .SYNOPSIS
        Returns all non-idle Agent jobs running on the server

    .DESCRIPTION
        This function returns agent jobs that active on the SQL Server instance when calling the command

    .PARAMETER SqlInstance
        The target SQL Server instance or instances

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER InputObject
        Enables piped input from Get-DbaAgentJob

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Agent, Job
        Author: Stephen Bennett, https://sqlnotesfromtheunderground.wordpress.com/

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaRunningJob

    .EXAMPLE
        PS C:\> Get-DbaRunningJob -SqlInstance sql2017

        Returns any active jobs on sql2017

    .EXAMPLE
        PS C:\> Get-DbaAgentJob -SqlInstance sql2017, sql2019 | Get-DbaRunningJob

        Returns all active jobs on multiple instances piped into the function.

    .EXAMPLE
        PS C:\> $servers | Get-DbaRunningJob

        Returns all active jobs on multiple instances piped into the function.

    #>
    [CmdletBinding()]
    param (
        [parameter(ValueFromPipeline)]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Agent.Job[]]$InputObject,
        [switch]$EnableException
    )
    process {
        if ($SqlInstance) {
            Get-DbaAgentJob -SqlInstance $SqlInstance -SqlCredential $SqlCredential | Where-Object CurrentRunStatus -ne 'Idle'
        }

        $InputObject | Where-Object CurrentRunStatus -ne 'Idle'
    }
}

tools\dbatools\functions\Get-DbaSchemaChangeHistory.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaSchemaChangeHistory {
    <#
    .SYNOPSIS
        Gets DDL changes logged in the system trace.

    .DESCRIPTION
        Queries the default system trace for any DDL changes in the specified time frame
        Only works with SQL 2005 and later, as the system trace didn't exist before then

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto-populated from the server

    .PARAMETER Since
        A date from which DDL changes should be returned. Default is to start at the beginning of the current trace file

    .PARAMETER Object
        The name of a SQL Server object you want to look for changes on

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Migration, Backup, Database
        Author: Stuart Moore (@napalmgram - http://stuart-moore.com)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaSchemaChangeHistory

    .EXAMPLE
        PS C:\> Get-DbaSchemaChangeHistory -SqlInstance localhost

        Returns all DDL changes made in all databases on the SQL Server instance localhost since the system trace began

    .EXAMPLE
        PS C:\> Get-DbaSchemaChangeHistory -SqlInstance localhost -Since (Get-Date).AddDays(-7)

        Returns all DDL changes made in all databases on the SQL Server instance localhost in the last 7 days

    .EXAMPLE
        PS C:\> Get-DbaSchemaChangeHistory -SqlInstance localhost -Database Finance, Prod -Since (Get-Date).AddDays(-7)

        Returns all DDL changes made in the Prod and Finance databases on the SQL Server instance localhost in the last 7 days

    .EXAMPLE
        PS C:\> Get-DbaSchemaChangeHistory -SqlInstance localhost -Database Finance -Object AccountsTable -Since (Get-Date).AddDays(-7)

        Returns all DDL changes made  to the AccountsTable object in the Finance database on the SQL Server instance localhost in the last 7 days

    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]
        $SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [DbaDateTime]$Since,
        [string[]]$Object,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }
            if ($Server.Version.Major -le 8) {
                Stop-Function -Message "This command doesn't support SQL Server 2000, sorry about that"
                return
            }
            $TraceFileQuery = "select path from sys.traces where is_default = 1"

            $TraceFile = $server.Query($TraceFileQuery) | Select-Object Path

            $Databases = $server.Databases

            if ($Database) { $Databases = $Databases | Where-Object Name -in $database }

            if ($ExcludeDatabase) { $Databases = $Databases | Where-Object Name -notin $ExcludeDatabase }

            foreach ($db in $Databases) {
                if ($db.IsAccessible -eq $false) {
                    Write-Message -Level Verbose -Message "$($db.name) is not accessible, skipping"
                }

                $sql = "select SERVERPROPERTY('MachineName') AS ComputerName,
                        ISNULL(SERVERPROPERTY('InstanceName'), 'MSSQLSERVER') AS InstanceName,
                        SERVERPROPERTY('ServerName') AS SqlInstance,
                        tt.databasename as 'DatabaseName',
                        starttime as 'DateModified',
                        Sessionloginname as 'LoginName',
                        NTusername as 'UserName',
                        applicationname as 'ApplicationName',
                        case eventclass
                            When '46' Then 'Create'
                            when '47' Then 'Drop'
                            when '164' then 'Alter'
                        end as 'DDLOperation',
                        s.name+'.'+o.name as 'Object',
                        o.type_desc as 'ObjectType'
                        from
                        sys.objects o  inner join
                        sys.schemas s on s.schema_id=o.schema_id
                        cross apply (select * from ::fn_trace_gettable('$($TraceFile.path)',default) where ObjectID=o.object_id ) tt
                        where tt.objecttype not in (21587)
                        and tt.DatabaseID=db_id()
                        and tt.EventSubClass=0"

                if ($null -ne $since) {
                    $sql = $sql + " and tt.StartTime>'$Since' "
                }
                if ($null -ne $object) {
                    $sql = $sql + " and o.name in ('$($object -join ''',''')') "
                }

                $sql = $sql + " order by tt.StartTime asc"
                Write-Message -Level Verbose -Message "Querying Database $db on $instance"
                Write-Message -Level Debug -Message "SQL: $sql"

                $db.Query($sql) | Select-DefaultView -Property ComputerName, InstanceName, SqlInstance, DatabaseName, DateModified, LoginName, UserName, ApplicationName, DDLOperation, Object, ObjectType
            }
        }
    }
}

tools\dbatools\functions\Get-DbaServerAuditSpecification.ps1

function Get-DbaServerAuditSpecification {
    <#
    .SYNOPSIS
        Gets SQL Security Audit Specification information for each instance(s) of SQL Server.

    .DESCRIPTION
        The Get-DbaServerAuditSpecification command gets SQL Security Audit Specification information for each instance(s) of SQL Server.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function
        to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Audit, Security, SqlAudit
        Author: Garry Bargsley (@gbargsley), http://blog.garrybargsley.com

        dbatools PowerShell module (https://dbatools.io, [email protected])
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaServerAuditSpecification

    .EXAMPLE
        PS C:\> Get-DbaServerAuditSpecification -SqlInstance localhost

        Returns all Security Audit Specifications on the local default SQL Server instance

    .EXAMPLE
        PS C:\> Get-DbaServerAuditSpecification -SqlInstance localhost, sql2016

        Returns all Security Audit Specifications for the local and sql2016 SQL Server instances

    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 10
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            foreach ($auditSpecification in $server.ServerAuditSpecifications) {
                Add-Member -Force -InputObject $auditSpecification -MemberType NoteProperty -Name ComputerName -value $server.ComputerName
                Add-Member -Force -InputObject $auditSpecification -MemberType NoteProperty -Name InstanceName -value $server.ServiceName
                Add-Member -Force -InputObject $auditSpecification -MemberType NoteProperty -Name SqlInstance -value $server.DomainInstanceName

                Select-DefaultView -InputObject $auditSpecification -Property ComputerName, InstanceName, SqlInstance, ID, Name, AuditName, Enabled, CreateDate, DateLastModified, Guid
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Get-SqlServerAuditSpecification
    }
}

tools\dbatools\functions\Get-DbaServerInstallDate.ps1

function Get-DbaServerInstallDate {
    <#
    .SYNOPSIS
        Returns the install date of a SQL Instance and Windows Server.

    .DESCRIPTION
        This command returns:
        SqlInstallDate
        WindowsInstallDate (use -IncludeWindows)

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Credential object used to connect to the SQL Server using SQL Authentication as a different user

    .PARAMETER Credential
        Credential object used to connect to the SQL Server as a different Windows user

    .PARAMETER IncludeWindows
        Includes the Windows Server Install date information

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Install
        Author: Mitchell Hamann (@SirCaptainMitch), mitchellhamann.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaServerInstallDate

    .EXAMPLE
        PS C:\> Get-DbaServerInstallDate -SqlInstance SqlBox1\Instance2

        Returns an object with SQL Instance Install date as a string.

    .EXAMPLE
        PS C:\> Get-DbaServerInstallDate -SqlInstance winserver\sqlexpress, sql2016

        Returns an object with SQL Instance Install date as a string for both SQLInstances that are passed to the cmdlet.

    .EXAMPLE
        PS C:\> 'sqlserver2014a', 'sql2016' | Get-DbaServerInstallDate

        Returns an object with SQL Instance Install date as a string for both SQLInstances that are passed to the cmdlet via the pipeline.

    .EXAMPLE
        PS C:\> Get-DbaServerInstallDate -SqlInstance sqlserver2014a, sql2016 -IncludeWindows

        Returns an object with the Windows Install date and the SQL install date as a string.

    .EXAMPLE
        PS C:\> Get-DbaCmsRegServer -SqlInstance sql2014 | Get-DbaServerInstallDate

        Returns an object with SQL Instance install date as a string for every server listed in the Central Management Server on sql2014

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "ComputerName")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]
        $SqlCredential,
        [PSCredential]
        $Credential,
        [Switch]$IncludeWindows,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failed to process Instance $Instance" -ErrorRecord $_ -Target $instance -Continue
            }

            if ($server.VersionMajor -ge 9) {
                Write-Message -Level Verbose -Message "Getting Install Date for: $instance"
                $sql = "SELECT create_date FROM sys.server_principals WHERE sid = 0x010100000000000512000000"
                [DbaDateTime]$sqlInstallDate = $server.Query($sql, 'master', $true).create_date

            } else {
                Write-Message -Level Verbose -Message "Getting Install Date for: $instance"
                $sql = "SELECT schemadate FROM sysservers"
                [DbaDateTime]$sqlInstallDate = $server.Query($sql, 'master', $true).create_date
            }

            $WindowsServerName = $server.ComputerNamePhysicalNetBIOS

            if ($IncludeWindows) {
                try {
                    [DbaDateTime]$windowsInstallDate = (Get-DbaCmObject -ClassName win32_OperatingSystem -ComputerName $WindowsServerName -Credential $Credential -EnableException).InstallDate
                } catch {
                    Stop-Function -Message "Failed to connect to: $WindowsServerName" -Continue -Target $instance -ErrorRecord $_
                }
            }

            $object = [PSCustomObject]@{
                ComputerName       = $server.ComputerName
                InstanceName       = $server.ServiceName
                SqlInstance        = $server.DomainInstanceName
                SqlInstallDate     = $sqlInstallDate
                WindowsInstallDate = $windowsInstallDate
            }

            if ($IncludeWindows) {
                Select-DefaultView -InputObject $object -Property ComputerName, InstanceName, SqlInstance, SqlInstallDate, WindowsInstallDate
            } else {
                Select-DefaultView -InputObject $object -Property ComputerName, InstanceName, SqlInstance, SqlInstallDate
            }

        }
    }
}

tools\dbatools\functions\Get-DbaPbmStore.ps1

function Get-DbaPbmStore {
    <#
    .SYNOPSIS
        Returns the policy based management store.

    .DESCRIPTION
        Returns the policy based management store.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Policy
        Filters results to only show specific policy

    .PARAMETER Category
        Filters results to only show policies in the category selected

    .PARAMETER IncludeSystemObject
        By default system objects are filtered out. Use this parameter to include them.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Policy, PolicyBasedManagement, PBM
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaPbmStore

    .EXAMPLE
        PS C:\> Get-DbaPbmStore -SqlInstance sql2016

        Return the policy store from the sql2016 instance

    .EXAMPLE
        PS C:\> Get-DbaPbmStore -SqlInstance sql2016 -SqlCredential $cred

        Uses a credential $cred to connect and return the policy store from the sql2016 instance

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 10
                $sqlStoreConnection = New-Object Microsoft.SqlServer.Management.Sdk.Sfc.SqlStoreConnection $server.ConnectionContext.SqlConnectionObject
                # DMF is the Declarative Management Framework, Policy Based Management's old name
                $store = New-Object Microsoft.SqlServer.Management.DMF.PolicyStore $sqlStoreConnection
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            Add-Member -Force -InputObject $store -MemberType NoteProperty ComputerName -value $server.ComputerName
            Add-Member -Force -InputObject $store -MemberType NoteProperty InstanceName -value $server.ServiceName
            Add-Member -Force -InputObject $store -MemberType NoteProperty SqlInstance -value $server.DomainInstanceName

            Select-DefaultView -InputObject $store -ExcludeProperty SqlStoreConnection, ConnectionContext, Properties, Urn, Parent, DomainInstanceName, Metadata, IdentityKey, Name
        }
    }
}

tools\dbatools\functions\Get-DbaSsisEnvironmentVariable.ps1

function Get-DbaSsisEnvironmentVariable {
    <#
    .SYNOPSIS
        This command gets specified SSIS Environment and all its variables

    .DESCRIPTION
        This command gets all variables from specified environment from SSIS Catalog. All sensitive values are decrypted.
        The function communicates directly with SSISDB database, "SQL Server Integration Services" service isn't queried there.
        Each parameter (besides SqlInstance and SqlCredential) acts as the filter to only include or exclude particular element

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.
        This can be a collection and receive pipeline input to allow the function
        to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Environment
        The SSIS Environments names that we want to get variables from

    .PARAMETER EnvironmentExclude
        The SSIS Environments to exclude. Acts as a filter for environments, best used without 'Environment' parameter
        to get variables for all environments but excluded ones

    .PARAMETER Folder
        The Folders names that contain the environments

    .PARAMETER FolderExclude
        The Folders names to exclude. Acts as a filter for folders containing environments, best user without 'Folder' parameter
        to get variables for all folders but excluded ones

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: SSIS, SSISDB, Variable
        Author: Bartosz Ratajczyk (@b_ratajczyk)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaSsisEnvironmentVariable

    .EXAMPLE
        PS C:\> Get-DbaSsisEnvironmentVariable -SqlInstance localhost -Environment DEV -Folder DWH_ETL

        Gets variables of 'DEV' environment located in 'DWH_ETL' folder on 'localhost' Server

    .EXAMPLE
        PS C:\> Get-DbaSsisEnvironmentVariable -SqlInstance localhost -Environment DEV -Folder DWH_ETL, DEV2, QA

        Gets variables of 'DEV' environment(s) located in folders 'DWH_ETL', 'DEV2' and 'QA' on 'localhost' server

    .EXAMPLE
        PS C:\> Get-DbaSsisEnvironmentVariable -SqlInstance localhost -Environment DEV -FolderExclude DWH_ETL, DEV2, QA

        Gets variables of 'DEV' environments located in folders other than 'DWH_ETL', 'DEV2' and 'QA' on 'localhost' server

    .EXAMPLE
        PS C:\> Get-DbaSsisEnvironmentVariable -SqlInstance localhost -Environment DEV, PROD -Folder DWH_ETL, DEV2, QA

        Gets variables of 'DEV' and 'PROD' environment(s) located in folders 'DWH_ETL', 'DEV2' and 'QA' on 'localhost' server

    .EXAMPLE
        PS C:\> Get-DbaSsisEnvironmentVariable -SqlInstance localhost -EnvironmentExclude DEV, PROD -Folder DWH_ETL, DEV2, QA

        Gets variables of environments other than 'DEV' and 'PROD' located in folders 'DWH_ETL', 'DEV2' and 'QA' on 'localhost' server

    .EXAMPLE
        PS C:\> Get-DbaSsisEnvironmentVariable -SqlInstance localhost -EnvironmentExclude DEV, PROD -FolderExclude DWH_ETL, DEV2, QA

        Gets variables of environments other than 'DEV' and 'PROD' located in folders other than 'DWH_ETL', 'DEV2' and 'QA' on 'localhost' server

    .EXAMPLE
        PS C:\> 'localhost' | Get-DbaSsisEnvironmentVariable -EnvironmentExclude DEV, PROD

        Gets all SSIS environments except 'DEV' and 'PROD' from 'localhost' server. The server name comes from pipeline

    .EXAMPLE
        PS C:\> 'SRV1', 'SRV3' | Get-DbaSsisEnvironmentVariable

        Gets all SSIS environments from 'SRV1' and 'SRV3' servers. The server's names come from pipeline

    .EXAMPLE
        PS C:\> 'SRV1', 'SRV2' | Get-DbaSsisEnvironmentVariable DEV | Out-GridView

        Gets all variables from 'DEV' Environment(s) on servers 'SRV1' and 'SRV2' and outputs it as the GridView.
        The server names come from the pipeline.

    .EXAMPLE
        PS C:\> 'localhost' | Get-DbaSsisEnvironmentVariable -EnvironmentExclude DEV, PROD | Select-Object -Property Name, Value | Where-Object {$_.Name -match '^a'} | Out-GridView

        Gets all variables from Environments other than 'DEV' and 'PROD' on 'localhost' server,
        selects Name and Value properties for variables that names start with letter 'a' and outputs it as the GridView

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias('SqlServer', 'ServerInstance')]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [object[]]$Environment,
        [object[]]$EnvironmentExclude,
        [object[]]$Folder,
        [object[]]$FolderExclude,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -MinimumVersion 11
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            try {
                $ISNamespace = "Microsoft.SqlServer.Management.IntegrationServices"

                $SSIS = New-Object "$ISNamespace.IntegrationServices" $server
            } catch {
                Stop-Function -Message "Could not connect to SSIS Catalog on $instance or current SMO library does not support SSIS catalog"
                return
            }

            Write-Message -Message "Fetching SSIS Catalog and its folders" -Level Verbose
            $catalog = $SSIS.Catalogs | Where-Object { $_.Name -eq "SSISDB" }

            # get all folders names if none provided
            if ($null -eq $Folder) {
                $searchFolders = $catalog.Folders.Name
            } else {
                $searchFolders = $Folder
            }

            # filter unwanted folders
            if ($FolderExclude) {
                $searchFolders = $searchFolders | Where-Object { $_ -notin $FolderExclude }
            }

            if ($null -eq $searchFolders) {
                Write-Message -Message "Instance: $instance > -Folder and -FolderExclude filters return an empty collection. Skipping" -Level Warning
            } else {
                foreach ($f in $searchFolders) {
                    # get all environments names if none provided
                    if ($null -eq $Environment) {
                        $searchEnvironments = $catalog.Folders.Environments.Name
                    } else {
                        $searchEnvironments = $Environment
                    }

                    #filter unwanted environments
                    if ($EnvironmentExclude) {
                        $searchEnvironments = $searchEnvironments | Where-Object { $_ -notin $EnvironmentExclude }
                    }

                    if ($null -eq $searchEnvironments) {
                        Write-Message -Message "Instance: $instance / Folder: $f > -Environment and -EnvironmentExclude filters return an empty collection. Skipping." -Level Warning
                    } else {
                        $Environments = $catalog.Folders[$f].Environments | Where-Object { $_.Name -in $searchEnvironments }

                        foreach ($e in $Environments) {
                            #encryption handling
                            $encKey = 'MS_Enckey_Env_' + $e.EnvironmentId
                            $encCert = 'MS_Cert_Env_' + $e.EnvironmentId

                            <#
                            SMO does not return sensitive values (gets data from catalog.environment_variables)
                            We have to manually query internal.environment_variables instead and use symmetric keys
                            within T-SQL code
                            #>

                            $sql = @"
                            OPEN SYMMETRIC KEY $encKey DECRYPTION BY CERTIFICATE $encCert;

                            SELECT
                                ev.variable_id,
                                ev.name,
                                ev.description,
                                ev.type,
                                ev.sensitive,
                                value = ev.value,
                                ev.sensitive_value,
                                ev.base_data_type,
                                decrypted = decrypted.value
                            FROM internal.environment_variables ev

                                CROSS APPLY (
                                    SELECT
                                        value   = CASE base_data_type
                                                    WHEN 'nvarchar' THEN CONVERT(NVARCHAR(MAX), DECRYPTBYKEY(sensitive_value))
                                                    WHEN 'bit' THEN CONVERT(NVARCHAR(MAX), CONVERT(bit, DECRYPTBYKEY(sensitive_value)))
                                                    WHEN 'datetime' THEN CONVERT(NVARCHAR(MAX), CONVERT(datetime2(0), DECRYPTBYKEY(sensitive_value)))
                                                    WHEN 'single' THEN CONVERT(NVARCHAR(MAX), CONVERT(DECIMAL(38, 18), DECRYPTBYKEY(sensitive_value)))
                                                    WHEN 'float' THEN CONVERT(NVARCHAR(MAX), CONVERT(DECIMAL(38, 18), DECRYPTBYKEY(sensitive_value)))
                                                    WHEN 'decimal' THEN CONVERT(NVARCHAR(MAX), CONVERT(DECIMAL(38, 18), DECRYPTBYKEY(sensitive_value)))
                                                    WHEN 'tinyint' THEN CONVERT(NVARCHAR(MAX), CONVERT(tinyint, DECRYPTBYKEY(sensitive_value)))
                                                    WHEN 'smallint' THEN CONVERT(NVARCHAR(MAX), CONVERT(smallint, DECRYPTBYKEY(sensitive_value)))
                                                    WHEN 'int' THEN CONVERT(NVARCHAR(MAX), CONVERT(INT, DECRYPTBYKEY(sensitive_value)))
                                                    WHEN 'bigint' THEN CONVERT(NVARCHAR(MAX), CONVERT(bigint, DECRYPTBYKEY(sensitive_value)))
                                                END
                                ) decrypted
                            WHERE environment_id = $($e.EnvironmentId);
                            CLOSE SYMMETRIC KEY $encKey;
"@

                            $ssisVariables = $server.Query($sql, "SSISDB")

                            foreach ($variable in $ssisVariables) {
                                if ($variable.sensitive -eq $true) {
                                    $value = $variable.decrypted
                                } else {
                                    $value = $variable.value
                                }

                                [PSCustomObject]@{
                                    ComputerName = $server.ComputerName
                                    InstanceName = $server.ServiceName
                                    SqlInstance  = $server.DomainInstanceName
                                    Folder       = $f
                                    Environment  = $e.Name
                                    Id           = $variable.variable_id
                                    Name         = $variable.Name
                                    Description  = $variable.description
                                    Type         = $variable.type
                                    IsSensitive  = $variable.sensitive
                                    BaseDataType = $variable.base_data_type
                                    Value        = $value
                                }
                            }
                        }
                    }
                }
            }
        }
    }
}

tools\dbatools\functions\Import-DbaCmsRegServer.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Import-DbaCmsRegServer {
    <#
    .SYNOPSIS
        Imports registered servers and registered server groups to SQL Server Central Management Server (CMS)

    .DESCRIPTION
        Imports registered servers and registered server groups to SQL Server Central Management Server (CMS)

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Group
        Imports to specific group

    .PARAMETER Path
        Optional path to exported reg server XML

    .PARAMETER InputObject
        Enables piping from Get-DbaCmsRegServer, Get-DbaCmsRegServerGroup, CSVs and other objects.

        If importing from CSV or other object, a column named ServerName is required. Optional columns include Name, Description and Group.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.

        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.

        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: RegisteredServer, CMS
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Import-DbaCmsRegServer

    .EXAMPLE
        PS C:\> Import-DbaCmsRegServer -SqlInstance sql2012 -Path C:\temp\corp-regservers.xml

        Imports C:\temp\corp-regservers.xml to the CMS on sql2012

    .EXAMPLE
        PS C:\> Import-DbaCmsRegServer -SqlInstance sql2008 -Group hr\Seattle -Path C:\temp\Seattle.xml

        Imports C:\temp\Seattle.xml to Seattle subgroup within the hr group on sql2008

    .EXAMPLE
        PS C:\> Get-DbaCmsRegServer -SqlInstance sql2008, sql2012 | Import-DbaCmsRegServer -SqlInstance sql2017

        Imports all registered servers from sql2008 and sql2012 to sql2017

    .EXAMPLE
        PS C:\> Get-DbaCmsRegServerGroup -SqlInstance sql2008 -Group hr\Seattle | Import-DbaCmsRegServer -SqlInstance sql2017 -Group Seattle

        Imports all registered servers from the hr\Seattle group on sql2008 to the Seattle group on sql2017

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias("FullName")]
        [string[]]$Path,
        [parameter(ValueFromPipeline)]
        [object[]]$InputObject,
        [object]$Group,
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            # Prep to import from file
            if ((Test-Bound -ParameterName Path)) {
                $InputObject += Get-ChildItem -Path $Path
            }
            if ((Test-Bound -ParameterName Group) -and (Test-Bound -Not -ParameterName Path)) {
                if ($Group -is [Microsoft.SqlServer.Management.RegisteredServers.ServerGroup]) {
                    $groupobject = $Group
                } else {
                    $groupobject = Get-DbaCmsRegServerGroup -SqlInstance $instance -SqlCredential $SqlCredential -Group $Group
                }
                if (-not $groupobject) {
                    Stop-Function -Message "Group $Group cannot be found on $instance" -Target $instance -Continue
                }
            }

            foreach ($object in $InputObject) {
                if ($object -is [Microsoft.SqlServer.Management.RegisteredServers.RegisteredServer]) {

                    $groupexists = Get-DbaCmsRegServerGroup -SqlInstance $instance -SqlCredential $SqlCredential -Group $object.Parent.Name
                    if (-not $groupexists) {
                        $groupexists = Add-DbaCmsRegServerGroup -SqlInstance $instance -SqlCredential $SqlCredential -Name $object.Parent.Name
                    }
                    Add-DbaCmsRegServer -SqlInstance $instance -SqlCredential $SqlCredential -Name $object.Name -ServerName $object.ServerName -Description $object.Description -Group $groupexists
                } elseif ($object -is [Microsoft.SqlServer.Management.RegisteredServers.ServerGroup]) {
                    foreach ($regserver in $object.RegisteredServers) {
                        $groupexists = Get-DbaCmsRegServerGroup -SqlInstance $instance -SqlCredential $SqlCredential -Group $regserver.Parent.Name
                        if (-not $groupexists) {
                            $groupexists = Add-DbaCmsRegServerGroup -SqlInstance $instance -SqlCredential $SqlCredential -Name $regserver.Parent.Name
                        }
                        Add-DbaCmsRegServer -SqlInstance $instance -SqlCredential $SqlCredential -Name $regserver.Name -ServerName $regserver.ServerName -Description $regserver.Description -Group $groupexists
                    }
                } elseif ($object -is [System.IO.FileInfo]) {
                    if ((Test-Bound -ParameterName Group)) {
                        if ($Group -is [Microsoft.SqlServer.Management.RegisteredServers.ServerGroup]) {
                            $reggroups = $Group
                        } else {
                            $reggroups = Get-DbaCmsRegServerGroup -SqlInstance $instance -SqlCredential $SqlCredential -Group $Group
                        }
                    } else {
                        $reggroups = Get-DbaCmsRegServerGroup -SqlInstance $instance -SqlCredential $SqlCredential -Id 1
                    }

                    foreach ($file in $object) {
                        if (-not (Test-Path -Path $file)) {
                            Stop-Function -Message "$file cannot be found" -Target $file -Continue
                        }

                        foreach ($reggroup in $reggroups) {
                            try {
                                Write-Message -Level Verbose -Message "Importing $file to $($reggroup.Name) on $instance"
                                $urnlist = $reggroup.RegisteredServers.Urn.Value
                                $reggroup.Import($file.FullName)
                                Get-DbaCmsRegServer -SqlInstance $instance -SqlCredential $SqlCredential | Where-Object { $_.Urn.Value -notin $urnlist }
                            } catch {
                                Stop-Function -Message "Failure attempting to import $file to $instance" -ErrorRecord $_ -Continue
                            }
                        }
                    }
                } else {
                    if (-not $object.ServerName) {
                        Stop-Function -Message "Property 'ServerName' not found in InputObject. No servers added." -Continue
                    }
                    Add-DbaCmsRegServer -SqlInstance $instance -SqlCredential $SqlCredential -Name $object.Name -ServerName $object.ServerName -Description $object.Description -Group $groupobject
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias Import-DbaRegisteredServer
    }
}

tools\dbatools\functions\Import-DbaCsv.ps1

function Import-DbaCsv {
    <#
    .SYNOPSIS
        Efficiently imports very large (and small) CSV files into SQL Server.

    .DESCRIPTION
        Import-DbaCsv takes advantage of .NET's super fast SqlBulkCopy class to import CSV files into SQL Server.

        The entire import is performed within a transaction, so if a failure occurs or the script is aborted, no changes will persist.

        If the table or view specified does not exist and -AutoCreateTable, it will be automatically created using slow and efficient but accomodating data types.

    .PARAMETER Path
        Specifies path to the CSV file(s) to be imported. Multiple files may be imported at once.

    .PARAMETER NoHeaderRow
        By default, the first row is used to determine column names for the data being imported.

        Use this switch if the first row contains data and not column names.

    .PARAMETER Delimiter
        Specifies the delimiter used in the imported file(s). If no delimiter is specified, comma is assumed.

        Valid delimiters are '`t`, '|', ';',' ' and ',' (tab, pipe, semicolon, space, and comma).

    .PARAMETER SingleColumn
        Specifies that the file contains a single column of data. Otherwise, the delimiter check bombs.

    .PARAMETER SqlInstance
        The SQL Server Instance to import data into.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        Specifies the name of the database the CSV will be imported into. Options for this this parameter are  auto-populated from the server.

    .PARAMETER Schema
        Specifies the schema in which the SQL table or view where CSV will be imported into resides. Default is dbo

        If a schema name is not specified, and a CSV name with multiple dots is specified (ie; something.data.csv) then this will be interpreted as a request to import into a table [data] in the schema [something].

        If a schema does not currently exist, it will be created, after a prompt to confirm this. Authorization will be set to dbo by default

    .PARAMETER Table
        Specifies the SQL table or view where CSV will be imported into.

        If a table name is not specified, the table name will be automatically determined from the filename.

        If the table specified does not exist and -AutoCreateTable, it will be automatically created using slow and efficient but accomodating data types.

        If the automatically generated table datatypes do not work for you, please create the table prior to import.

        If you want to import specific columns from a CSV, create a view with corresponding columns.

    .PARAMETER Column
        Import only specific columns. To remap column names, use the ColumnMap.

    .PARAMETER ColumnMap
        By default, the bulk copy tries to automap columns. When it doesn't work as desired, this parameter will help. Check out the examples for more information.

    .PARAMETER AutoCreateTable
        Creates a table if it does not already exist. The table will be created with sub-optimal data types such as nvarchar(max)

    .PARAMETER Truncate
        If this switch is enabled, the destination table will be truncated prior to import.

    .PARAMETER NotifyAfter
        Specifies the import row count interval for reporting progress. A notification will be shown after each group of this many rows has been imported.

    .PARAMETER BatchSize
        Specifies the batch size for the import. Defaults to 50000.

    .PARAMETER TableLock
        If this switch is enabled, the SqlBulkCopy option to acquire a table lock will be used. This is automatically used if -Turbo is enabled.

        Per Microsoft "Obtain a bulk update lock for the duration of the bulk copy operation. When not
        specified, row locks are used."

    .PARAMETER CheckConstraints
        If this switch is enabled, the SqlBulkCopy option to check constraints will be used.

        Per Microsoft "Check constraints while data is being inserted. By default, constraints are not checked."

    .PARAMETER FireTriggers
        If this switch is enabled, the SqlBulkCopy option to allow insert triggers to be executed will be used.

        Per Microsoft "When specified, cause the server to fire the insert triggers for the rows being inserted into the database."

    .PARAMETER KeepIdentity
        If this switch is enabled, the SqlBulkCopy option to keep identity values from the source will be used.

        Per Microsoft "Preserve source identity values. When not specified, identity values are assigned by the destination."

    .PARAMETER KeepNulls
        If this switch is enabled, the SqlBulkCopy option to keep NULL values in the table will be used.

        Per Microsoft "Preserve null values in the destination table regardless of the settings for default values. When not specified, null values are replaced by default values where applicable."

    .PARAMETER NoProgress
        The progress bar is pretty but can slow down imports. Use this parameter to quietly import.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Migration, Import
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Import-DbaCsv

    .EXAMPLE
        PS C:\> Import-DbaCsv -Path C:\temp\housing.csv -SqlInstance sql001 -Database markets

        Imports the entire comma-delimited housing.csv to the SQL "markets" database on a SQL Server named sql001, using the first row as column names.

        Since a table name was not specified, the table name is automatically determined from filename as "housing".

    .EXAMPLE
        PS C:\> Import-DbaCsv -Path .\housing.csv -SqlInstance sql001 -Database markets -Table housing -Delimiter "`t" -NoHeaderRow

        Imports the entire comma-delimited housing.csv, including the first row which is not used for colum names, to the SQL markets database, into the housing table, on a SQL Server named sql001.

    .EXAMPLE
        PS C:\> Import-DbaCsv -Path C:\temp\huge.txt -SqlInstance sqlcluster -Database locations -Table latitudes -Delimiter "|"

        Imports the entire pipe-delimited huge.txt to the locations database, into the latitudes table on a SQL Server named sqlcluster.

    .EXAMPLE
        PS C:\> Import-DbaCsv -Path c:\temp\SingleColumn.csv -SqlInstance sql001 -Database markets -Table TempTable -SingleColumn

        Imports the single column CSV into TempTable

    .EXAMPLE
        PS C:\> Get-ChildItem -Path \\FileServer\csvs | Import-DbaCsv -SqlInstance sql001, sql002 -Database tempdb -AutoCreateTable

        Imports every CSV in the \\FileServer\csvs path into both sql001 and sql002's tempdb database. Each CSV will be imported into an automatically determined table name.

    .EXAMPLE
        PS C:\> Get-ChildItem -Path \\FileServer\csvs | Import-DbaCsv -SqlInstance sql001, sql002 -Database tempdb -AutoCreateTable -WhatIf

        Shows what would happen if the command were to be executed

    .EXAMPLE
        PS C:\> Import-DbaCsv -Path c:\temp\dataset.csv -SqlInstance sql2016 -Database tempdb -Column Name, Address, Mobile

        Import only Name, Address and Mobile even if other columns exist. All other columns are ignored and therefore null or default values.

    .EXAMPLE
        PS C:\> $columns = @{
        >> Text = 'FirstName'
        >> Number = 'PhoneNumber'
        >> }
        PS C:\> Import-DbaCsv -Path c:\temp\supersmall.csv -SqlInstance sql2016 -Database tempdb -ColumnMap $columns

        The CSV column 'Text' is inserted into SQL column 'FirstName' and CSV column Number is inserted into the SQL Column 'PhoneNumber'. All other columns are ignored and therefore null or default values.
    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'Low')]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseDeclaredVarsMoreThanAssignments", "line", Justification = "Variable line is used, False Positive on line 330")]
    param (
        [parameter(ValueFromPipeline)]
        [ValidateNotNullOrEmpty()]
        [Alias("Csv", "FullPath")]
        [object[]]$Path,
        [Parameter(Mandatory)]
        [DbaInstanceParameter[]]$SqlInstance,
        [pscredential]$SqlCredential,
        [Parameter(Mandatory)]
        [string]$Database,
        [string]$Table,
        [string]$Schema = "dbo",
        [switch]$Truncate,
        [string]$Delimiter = ",",
        [switch]$SingleColumn,
        [int]$BatchSize = 50000,
        [int]$NotifyAfter = 50000,
        [switch]$TableLock,
        [switch]$CheckConstraints,
        [switch]$FireTriggers,
        [switch]$KeepIdentity,
        [switch]$KeepNulls,
        [string[]]$Column,
        [hashtable[]]$ColumnMap,
        [switch]$AutoCreateTable,
        [switch]$NoProgress,
        [switch]$NoHeaderRow,
        [switch]$EnableException
    )
    begin {
        $FirstRowHeader = $NoHeaderRow -eq $false
        $scriptelapsed = [System.Diagnostics.Stopwatch]::StartNew()

        try {
            # SilentContinue isn't enough
            Add-Type -Path "$script:PSModuleRoot\bin\csv\LumenWorks.Framework.IO.dll" -ErrorAction Stop
        } catch {
            $null = 1
        }

        function New-SqlTable {
            <#
                .SYNOPSIS
                    Creates new Table using existing SqlCommand.

                    SQL datatypes based on best guess of column data within the -ColumnText parameter.
                    Columns parameter determine column names.

                .EXAMPLE
                    New-SqlTable -Path $Path -Delimiter $Delimiter -Columns $columns -ColumnText $columntext -SqlConn $sqlconn -Transaction $transaction

                .OUTPUTS
                    Creates new table
            #>
            [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseShouldProcessForStateChangingFunctions", "")]
            param (
                [Parameter(Mandatory)]
                [string]$Path,
                [Parameter(Mandatory)]
                [string]$Delimiter,
                [Parameter(Mandatory)]
                [bool]$FirstRowHeader,
                [System.Data.SqlClient.SqlConnection]$sqlconn,
                [System.Data.SqlClient.SqlTransaction]$transaction
            )
            $reader = New-Object LumenWorks.Framework.IO.Csv.CsvReader((New-Object System.IO.StreamReader($Path)), $FirstRowHeader, $Delimiter, 1)
            $columns = $reader.GetFieldHeaders()
            $reader.Close()
            $reader.Dispose()

            # Get SQL datatypes by best guess on first data row
            $sqldatatypes = @(); $index = 0

            foreach ($column in $Columns) {
                $sqldatatypes += "[$column] varchar(MAX)"
            }

            $sql = "BEGIN CREATE TABLE [$schema].[$table] ($($sqldatatypes -join ' NULL,')) END"
            $sqlcmd = New-Object System.Data.SqlClient.SqlCommand($sql, $sqlconn, $transaction)

            try {
                $null = $sqlcmd.ExecuteNonQuery()
            } catch {
                $errormessage = $_.Exception.Message.ToString()
                Stop-Function -Continue -Message "Failed to execute $sql. `nDid you specify the proper delimiter? `n$errormessage"
            }

            Write-Message -Level Verbose -Message "Successfully created table $schema.$table with the following column definitions:`n $($sqldatatypes -join "`n ")"
            # Write-Message -Level Warning -Message "All columns are created using a best guess, and use their maximum datatype."
            Write-Message -Level Verbose -Message "This is inefficient but allows the script to import without issues."
            Write-Message -Level Verbose -Message "Consider creating the table first using best practices if the data will be used in production."
        }

        Write-Message -Level Verbose -Message "Started at $(Get-Date)"

        # Getting the total rows copied is a challenge. Use SqlBulkCopyExtension.
        # http://stackoverflow.com/questions/1188384/sqlbulkcopy-row-count-when-complete

        $sourcecode = 'namespace System.Data.SqlClient
        {
            using Reflection;

            public static class SqlBulkCopyExtension
            {
                const String _rowsCopiedFieldName = "_rowsCopied";
                static FieldInfo _rowsCopiedField = null;

                public static int RowsCopiedCount(this SqlBulkCopy bulkCopy)
                {
                    if (_rowsCopiedField == null) _rowsCopiedField = typeof(SqlBulkCopy).GetField(_rowsCopiedFieldName, BindingFlags.NonPublic | BindingFlags.GetField | BindingFlags.Instance);
                    return (int)_rowsCopiedField.GetValue(bulkCopy);
                }
            }
        }
    '
        if (-not $script:core) {
            try {
                Add-Type -ReferencedAssemblies System.Data.dll -TypeDefinition $sourcecode -ErrorAction Stop
            } catch {
                $null = 1
            }
        }
    }
    process {
        foreach ($filename in $Path) {

            if ($filename.FullName) {
                $filename = $filename.FullName
            }

            if (-not (Test-Path -Path $filename)) {
                Stop-Function -Continue -Message "$filename cannot be found"
            }

            $file = (Resolve-Path -Path $filename).ProviderPath

            # Does the second line contain the specified delimiter?
            try {
                $firstline = Get-Content -Path $file -TotalCount 2 -ErrorAction Stop
            } catch {
                Stop-Function -Continue -Message "Failure reading $file" -ErrorRecord $_
            }
            if (-not $SingleColumn) {
                if ($firstline -notmatch $Delimiter) {
                    Stop-Function -Message "Delimiter ($Delimiter) not found in first few rows of $file. If this is a single column import, please specify -SingleColumn"
                    return
                }
            }

            # Automatically generate Table name if not specified, then prompt user to confirm
            if (-not (Test-Bound -ParameterName Table)) {
                $table = [IO.Path]::GetFileNameWithoutExtension($file)
                Write-Message -Level Verbose -Message "Table name not specified, using $table"
            }

            foreach ($instance in $SqlInstance) {
                $elapsed = [System.Diagnostics.Stopwatch]::StartNew()
                # Open Connection to SQL Server
                try {
                    $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential -StatementTimeout 0 -MinimumVersion 9
                    $sqlconn = $server.ConnectionContext.SqlConnectionObject
                    $sqlconn.Open()
                } catch {
                    Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
                }

                if ($PSCmdlet.ShouldProcess($instance, "Starting transaction in $Database")) {
                    # Everything will be contained within 1 transaction, even creating a new table if required
                    # and truncating the table, if specified.
                    $transaction = $sqlconn.BeginTransaction()
                }

                # Ensure database exists
                $sql = "select count(*) from master.dbo.sysdatabases where name = '$Database'"
                $sqlcmd = New-Object System.Data.SqlClient.SqlCommand($sql, $sqlconn, $transaction)
                if (($sqlcmd.ExecuteScalar()) -eq 0) {
                    Stop-Function -Continue -Message "Database does not exist on $instance"
                }
                Write-Message -Level Verbose -Message "Database exists"
                $sqlconn.ChangeDatabase($Database)

                # Ensure Schema exists
                $sql = "select count(*) from $Database.sys.schemas where name='$schema'"
                $sqlcmd = New-Object System.Data.SqlClient.SqlCommand($sql, $sqlconn, $transaction)

                # If Schema doesn't exist create it
                # Defaulting to dbo.
                if (($sqlcmd.ExecuteScalar()) -eq 0) {
                    if (-not $AutoCreateTable) {
                        Stop-Function -Continue -Message "Schema $Schema does not exist and AutoCreateTable was not specified"
                    }
                    $sql = "CREATE SCHEMA [$schema] AUTHORIZATION dbo"
                    if ($PSCmdlet.ShouldProcess($instance, "Creating schema $schema")) {
                        $sqlcmd = New-Object System.Data.SqlClient.SqlCommand($sql, $sqlconn, $transaction)
                        try {
                            $null = $sqlcmd.ExecuteNonQuery()
                        } catch {
                            Stop-Function -Continue -Message "Could not create $schema" -ErrorRecord $_
                        }
                    }
                }

                # Ensure table or view exists
                $sql = "select count(*) from $Database.sys.tables where name = '$table' and schema_id=schema_id('$schema')"
                $sqlcmd = New-Object System.Data.SqlClient.SqlCommand($sql, $sqlconn, $transaction)

                $sql2 = "select count(*) from $Database.sys.views where name = '$table' and schema_id=schema_id('$schema')"
                $sqlcmd2 = New-Object System.Data.SqlClient.SqlCommand($sql2, $sqlconn, $transaction)

                # Create the table if required. Remember, this will occur within a transaction, so if the script fails, the
                # new table will no longer exist.
                if (($sqlcmd.ExecuteScalar()) -eq 0 -and ($sqlcmd2.ExecuteScalar()) -eq 0) {
                    if (-not $AutoCreateTable) {
                        Stop-Function -Continue -Message "Table or view $table does not exist and AutoCreateTable was not specified"
                    }
                    Write-Message -Level Verbose -Message "Table does not exist"
                    if ($PSCmdlet.ShouldProcess($instance, "Creating table $table")) {
                        New-SqlTable -Path $file -Delimiter $Delimiter -FirstRowHeader $FirstRowHeader -SqlConn $sqlconn -Transaction $transaction
                    }
                } else {
                    Write-Message -Level Verbose -Message "Table exists"
                }

                # Truncate if specified. Remember, this will occur within a transaction, so if the script fails, the
                # truncate will not be committed.
                if ($Truncate) {
                    $sql = "TRUNCATE TABLE [$schema].[$table]"
                    if ($PSCmdlet.ShouldProcess($instance, "Performing TRUNCATE TABLE [$schema].[$table] on $Database")) {
                        $sqlcmd = New-Object System.Data.SqlClient.SqlCommand($sql, $sqlconn, $transaction)
                        try {
                            $null = $sqlcmd.ExecuteNonQuery()
                        } catch {
                            Stop-Function -Continue -Message "Could not truncate $schema.$table" -ErrorRecord $_
                        }
                    }
                }

                # Setup bulk copy
                Write-Message -Level Verbose -Message "Starting bulk copy for $(Split-Path $file -Leaf)"

                # Setup bulk copy options
                $bulkCopyOptions = @()
                $options = "TableLock", "CheckConstraints", "FireTriggers", "KeepIdentity", "KeepNulls", "Default"
                foreach ($option in $options) {
                    $optionValue = Get-Variable $option -ValueOnly -ErrorAction SilentlyContinue
                    if ($optionValue -eq $true) {
                        $bulkCopyOptions += "$option"
                    }
                }
                $bulkCopyOptions = $bulkCopyOptions -join " & "

                if ($PSCmdlet.ShouldProcess($instance, "Performing import from $file")) {
                    try {
                        # Create SqlBulkCopy using default options, or options specified in command line.
                        if ($bulkCopyOptions) {
                            $bulkcopy = New-Object Data.SqlClient.SqlBulkCopy($oleconnstring, $bulkCopyOptions, $transaction)
                        } else {
                            $bulkcopy = New-Object Data.SqlClient.SqlBulkCopy($sqlconn, "Default", $transaction)
                        }

                        $bulkcopy.DestinationTableName = "[$schema].[$table]"
                        $bulkcopy.BulkCopyTimeout = 0
                        $bulkCopy.BatchSize = $BatchSize
                        $bulkCopy.NotifyAfter = $NotifyAfter
                        $bulkCopy.EnableStreaming = $true

                        if ($ColumnMap) {
                            foreach ($columnname in $ColumnMap) {
                                foreach ($key in $columnname.Keys) {
                                    $null = $bulkcopy.ColumnMappings.Add($key, $columnname[$key])
                                }
                            }
                        }

                        if ($Column) {
                            foreach ($columnname in $Column) {
                                $null = $bulkcopy.ColumnMappings.Add($columnname, $columnname)
                            }
                        }
                    } catch {
                        Stop-Function -Continue -Message "Failure" -ErrorRecord $_
                    }

                    # Write to server :D
                    try {
                        # Open the text file from disk
                        # // or using (CsvReader csv = new CsvReader(File.OpenRead(path), false, Encoding.UTF8, addMark))
                        # When addMark is true, consecutive null bytes will be replaced by [removed x null bytes] to indicate the removal
                        $reader = New-Object LumenWorks.Framework.IO.Csv.CsvReader((New-Object System.IO.StreamReader($file)), $FirstRowHeader, $Delimiter, 1)

                        # Add rowcount output
                        $bulkCopy.Add_SqlRowsCopied( {
                                $script:totalrows = $args[1].RowsCopied
                                if (-not $NoProgress) {
                                    $timetaken = [math]::Round($elapsed.Elapsed.TotalSeconds, 2)
                                    Write-ProgressHelper -StepNumber 1 -TotalSteps 2 -Activity "Importing from $file" -Message ([System.String]::Format("Progress: {0} rows in {2} seconds", $script:totalrows, $percent, $timetaken)) -ExcludePercent
                                }
                            })

                        $bulkCopy.WriteToServer($reader)

                        if ($resultcount -is [int]) {
                            Write-Progress -id 1 -activity "Inserting $resultcount rows" -status "Complete" -Completed
                        }

                        $reader.Close()
                        $reader.Dispose()
                        $completed = $true
                    } catch {
                        $completed = $false

                        if ($resultcount -is [int]) {
                            Write-Progress -id 1 -activity "Inserting $resultcount rows" -status "Failed" -Completed
                        }
                        Stop-Function -Continue -Message "Failure" -ErrorRecord $_
                    }
                }
                if ($PSCmdlet.ShouldProcess($instance, "Committing transaction")) {
                    if ($completed) {
                        # "Note: This count does not take into consideration the number of rows actually inserted when Ignore Duplicates is set to ON."
                        $null = $transaction.Commit()
                        if ($script:core) {
                            $rowscopied = "Unsupported in Core"
                        } else {
                            $rowscopied = [System.Data.SqlClient.SqlBulkCopyExtension]::RowsCopiedCount($bulkcopy)
                        }

                        Write-Message -Level Verbose -Message "$rowscopied total rows copied"

                        [pscustomobject]@{
                            ComputerName = $server.ComputerName
                            InstanceName = $server.ServiceName
                            SqlInstance  = $server.DomainInstanceName
                            Database     = $Database
                            Table        = $table
                            Schema       = $schema
                            RowsCopied   = $rowscopied
                            Elapsed      = [prettytimespan]$elapsed.Elapsed
                            Path         = $file
                        }
                    } else {
                        Stop-Function -Message "Transaction rolled back. Was the proper delimiter specified? Is the first row the column name?" -ErrorRecord $_
                        return
                    }
                }

                # Close everything just in case & ignore errors
                try {
                    $null = $sqlconn.close(); $null = $sqlconn.Dispose();
                    $null = $bulkCopy.close(); $bulkcopy.dispose();
                    $null = $reader.close(); $null = $reader.dispose()
                } catch {
                    #here to avoid an empty catch
                    $null = 1
                }
            }
        }
    }
    end {
        # Close everything just in case & ignore errors
        try {
            $null = $sqlconn.close(); $null = $sqlconn.Dispose();
            $null = $bulkCopy.close(); $bulkcopy.dispose();
            $null = $reader.close(); $null = $reader.dispose()
        } catch {
            #here to avoid an empty catch
            $null = 1
        }

        # Script is finished. Show elapsed time.
        $totaltime = [math]::Round($scriptelapsed.Elapsed.TotalSeconds, 2)
        Write-Message -Level Verbose -Message "Total Elapsed Time for everything: $totaltime seconds"

        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias Import-DbaCsvtoSql
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Import-CsvToSql
    }
}

tools\dbatools\functions\Import-DbaPfDataCollectorSetTemplate.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Import-DbaPfDataCollectorSetTemplate {
    <#
    .SYNOPSIS
        Imports a new Performance Monitor Data Collector Set Template either from the dbatools repository or a file you specify.

    .DESCRIPTION
        Imports a new Performance Monitor Data Collector Set Template either from the dbatools repository or a file you specify.
        When importing data collector sets from the local instance, Run As Admin is required.

        Note: The included counters will be added for all SQL instances on the machine by default.
        For specific instances in addition to the default, use -Instance.

        See https://msdn.microsoft.com/en-us/library/windows/desktop/aa371952 for more information

    .PARAMETER ComputerName
        The target computer. Defaults to localhost.

    .PARAMETER Credential
        Allows you to login to servers using alternative credentials. To use:

        $scred = Get-Credential, then pass $scred object to the -Credential parameter.

    .PARAMETER Path
        The path to the xml file or files.

    .PARAMETER Template
        From one or more of the templates from the dbatools repository. Press Tab to cycle through the available options.

    .PARAMETER RootPath
        Sets the base path where the subdirectories are created.

    .PARAMETER DisplayName
        Sets the display name of the data collector set.

    .PARAMETER SchedulesEnabled
        If this switch is enabled, sets a value that indicates whether the schedules are enabled.

    .PARAMETER Segment
        Sets a value that indicates whether PLA creates new logs if the maximum size or segment duration is reached before the data collector set is stopped.

    .PARAMETER SegmentMaxDuration
        Sets the duration that the data collector set can run before it begins writing to new log files.

    .PARAMETER SegmentMaxSize
        Sets the maximum size of any log file in the data collector set.

    .PARAMETER Subdirectory
        Sets a base subdirectory of the root path where the next instance of the data collector set will write its logs.

    .PARAMETER SubdirectoryFormat
        Sets flags that describe how to decorate the subdirectory name. PLA appends the decoration to the folder name. For example, if you specify plaMonthDayHour, PLA appends the current month, day, and hour values to the folder name. If the folder name is MyFile, the result could be MyFile110816.

    .PARAMETER SubdirectoryFormatPattern
        Sets a format pattern to use when decorating the folder name. Default is 'yyyyMMdd\-NNNNNN'.

    .PARAMETER Task
        Sets the name of a Task Scheduler job to start each time the data collector set stops, including between segments.

    .PARAMETER TaskRunAsSelf
        If this switch is enabled, sets a value that determines whether the task runs as the data collector set user or as the user specified in the task.

    .PARAMETER TaskArguments
        Sets the command-line arguments to pass to the Task Scheduler job specified in the IDataCollectorSet::Task property.
        See https://msdn.microsoft.com/en-us/library/windows/desktop/aa371992 for more information.

    .PARAMETER TaskUserTextArguments
        Sets the command-line arguments that are substituted for the {usertext} substitution variable in the IDataCollectorSet::TaskArguments property.
        See https://msdn.microsoft.com/en-us/library/windows/desktop/aa371993 for more information.

    .PARAMETER StopOnCompletion
        If this switch is enabled, sets a value that determines whether the data collector set stops when all the data collectors in the set are in a completed state.

    .PARAMETER Instance
        By default, the template will be applied to all instances. If you want to set specific ones in addition to the default, supply just the instance name.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Performance, DataCollector, PerfCounter
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Import-DbaPfDataCollectorSetTemplate

    .EXAMPLE
        PS C:\> Import-DbaPfDataCollectorSetTemplate -ComputerName sql2017 -Template 'Long Running Query'

        Creates a new data collector set named 'Long Running Query' from the dbatools repository on the SQL Server sql2017.

    .EXAMPLE
        PS C:\> Import-DbaPfDataCollectorSetTemplate -ComputerName sql2017 -Template 'Long Running Query' -DisplayName 'New Long running query' -Confirm

        Creates a new data collector set named "New Long Running Query" using the 'Long Running Query' template. Forces a confirmation if the template exists.

    .EXAMPLE
        PS C:\> Get-DbaPfDataCollectorSet -ComputerName sql2017 -Session db_ola_health | Remove-DbaPfDataCollectorSet
        Import-DbaPfDataCollectorSetTemplate -ComputerName sql2017 -Template db_ola_health | Start-DbaPfDataCollectorSet

        Imports a session if it exists, then recreates it using a template.

    .EXAMPLE
        PS C:\> Get-DbaPfDataCollectorSetTemplate | Out-GridView -PassThru | Import-DbaPfDataCollectorSetTemplate -ComputerName sql2017

        Allows you to select a Session template then import to an instance named sql2017.

    .EXAMPLE
        PS C:\> Import-DbaPfDataCollectorSetTemplate -ComputerName sql2017 -Template 'Long Running Query' -Instance SHAREPOINT

        Creates a new data collector set named 'Long Running Query' from the dbatools repository on the SQL Server sql2017 for both the default and the SHAREPOINT instance.

        If you'd like to remove counters for the default instance, use Remove-DbaPfDataCollectorCounter.

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "Low")]
    param (
        [parameter(ValueFromPipeline)]
        [DbaInstanceParameter[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [string]$DisplayName,
        [switch]$SchedulesEnabled,
        [string]$RootPath,
        [switch]$Segment,
        [int]$SegmentMaxDuration,
        [int]$SegmentMaxSize,
        [string]$Subdirectory,
        [int]$SubdirectoryFormat = 3,
        [string]$SubdirectoryFormatPattern = 'yyyyMMdd\-NNNNNN',
        [string]$Task,
        [switch]$TaskRunAsSelf,
        [string]$TaskArguments,
        [string]$TaskUserTextArguments,
        [switch]$StopOnCompletion,
        [parameter(ValueFromPipelineByPropertyName)]
        [Alias("FullName")]
        [string[]]$Path,
        [string[]]$Template,
        [string[]]$Instance,
        [switch]$EnableException
    )
    begin {
        #Variable marked as unused by PSScriptAnalyzer
        #$metadata = Import-Clixml "$script:PSModuleRoot\bin\perfmontemplates\collectorsets.xml"

        $setscript = {
            $setname = $args[0]; $templatexml = $args[1]
            $collectorset = New-Object -ComObject Pla.DataCollectorSet
            $collectorset.SetXml($templatexml)
            $null = $collectorset.Commit($setname, $null, 0x0003) #add or modify.
            $null = $collectorset.Query($setname, $Null)
        }

        $instancescript = {
            $services = Get-Service -DisplayName *sql* | Select-Object -ExpandProperty DisplayName
            [regex]::matches($services, '(?<=\().+?(?=\))').Value | Where-Object { $PSItem -ne 'MSSQLSERVER' } | Select-Object -Unique
        }
    }
    process {
        
        
        if ((Test-Bound -ParameterName Path -Not) -and (Test-Bound -ParameterName Template -Not)) {
            Stop-Function -Message "You must specify Path or Template"
        }

        if (($Path.Count -gt 1 -or $Template.Count -gt 1) -and (Test-Bound -ParameterName Template)) {
            Stop-Function -Message "Name cannot be specified with multiple files or templates because the Session will already exist"
        }

        foreach ($computer in $ComputerName) {
            $null = Test-ElevationRequirement -ComputerName $computer -Continue

            foreach ($file in $template) {
                $templatepath = "$script:PSModuleRoot\bin\perfmontemplates\collectorsets\$file.xml"
                if ((Test-Path $templatepath)) {
                    $Path += $templatepath
                } else {
                    Stop-Function -Message "Invalid template ($templatepath does not exist)" -Continue
                }
            }

            foreach ($file in $Path) {

                if ((Test-Bound -ParameterName DisplayName -Not)) {
                    Set-Variable -Name DisplayName -Value (Get-ChildItem -Path $file).BaseName
                }

                $Name = $DisplayName

                Write-Message -Level Verbose -Message "Processing $file for $computer"

                if ((Test-Bound -ParameterName RootPath -Not)) {
                    Set-Variable -Name RootName -Value "%systemdrive%\PerfLogs\Admin\$Name"
                }

                # Perform replace
                $temp = ([System.IO.Path]::GetTempPath()).TrimEnd("").TrimEnd("\")
                $tempfile = "$temp\import-dbatools-perftemplate.xml"

                try {
                    # Get content
                    $contents = Get-Content $file -ErrorAction Stop

                    # Replace content
                    $replacements = 'RootPath', 'DisplayName', 'SchedulesEnabled', 'Segment', 'SegmentMaxDuration', 'SegmentMaxSize', 'SubdirectoryFormat', 'SubdirectoryFormatPattern', 'Task', 'TaskRunAsSelf', 'TaskArguments', 'TaskUserTextArguments', 'StopOnCompletion', 'DisplayNameUnresolved'

                    foreach ($replacement in $replacements) {
                        $phrase = "<$replacement></$replacement>"
                        $value = (Get-Variable -Name $replacement -ErrorAction SilentlyContinue).Value
                        if ($value -eq $false) {
                            $value = "0"
                        }
                        if ($value -eq $true) {
                            $value = "1"
                        }
                        $replacephrase = "<$replacement>$value</$replacement>"
                        $contents = $contents.Replace($phrase, $replacephrase)
                    }

                    # Set content
                    $null = Set-Content -Path $tempfile -Value $contents -Encoding Unicode
                    $xml = [xml](Get-Content $tempfile -ErrorAction Stop)
                    $plainxml = Get-Content $tempfile -ErrorAction Stop -Raw
                    $file = $tempfile
                } catch {
                    Stop-Function -Message "Failure" -ErrorRecord $_ -Target $file -Continue
                }
                if (-not $xml.DataCollectorSet) {
                    Stop-Function -Message "$file is not a valid Performance Monitor template document" -Continue
                }

                try {
                    Write-Message -Level Verbose -Message "Importing $file as $name "

                    if ($instance) {
                        $instances = $instance
                    } else {
                        $instances = Invoke-Command2 -ComputerName $computer -Credential $Credential -ScriptBlock $instancescript -ErrorAction Stop -Raw
                    }

                    $scriptblock = {
                        try {
                            $results = Invoke-Command2 -ComputerName $computer -Credential $Credential -ScriptBlock $setscript -ArgumentList $Name, $plainxml -ErrorAction Stop
                            Write-Message -Level Verbose -Message " $results"
                        } catch {
                            Stop-Function -Message "Failure starting $setname on $computer" -ErrorRecord $_ -Target $computer -Continue
                        }
                    }

                    if ((Get-DbaPfDataCollectorSet -ComputerName $computer -CollectorSet $Name)) {
                        if ($Pscmdlet.ShouldProcess($computer, "CollectorSet $Name already exists. Modify?")) {
                            Invoke-Command -Scriptblock $scriptblock
                            $output = Get-DbaPfDataCollectorSet -ComputerName $computer -CollectorSet $Name
                        }
                    } else {
                        if ($Pscmdlet.ShouldProcess($computer, "Importing collector set $Name")) {
                            Invoke-Command -Scriptblock $scriptblock
                            $output = Get-DbaPfDataCollectorSet -ComputerName $computer -CollectorSet $Name
                        }
                    }

                    $newcollection = @()
                    foreach ($instance in $instances) {
                        $datacollector = Get-DbaPfDataCollectorSet -ComputerName $computer -CollectorSet $Name | Get-DbaPfDataCollector
                        $sqlcounters = $datacollector | Get-DbaPfDataCollectorCounter | Where-Object { $_.Name -match 'sql.*\:' -and $_.Name -notmatch 'sqlclient' } | Select-Object -ExpandProperty Name

                        foreach ($counter in $sqlcounters) {
                            $split = $counter.Split(":")
                            $firstpart = switch ($split[0]) {
                                'SQLServer' { 'MSSQL' }
                                '\SQLServer' { '\MSSQL' }
                                default { $split[0] }
                            }
                            $secondpart = $split[-1]
                            $finalcounter = "$firstpart`$$instance`:$secondpart"
                            $newcollection += $finalcounter
                        }
                    }

                    if ($newcollection.Count) {
                        if ($Pscmdlet.ShouldProcess($computer, "Adding $($newcollection.Count) additional counters")) {
                            $null = Add-DbaPfDataCollectorCounter -InputObject $datacollector -Counter $newcollection
                        }
                    }

                    Remove-Item $tempfile -ErrorAction SilentlyContinue
                    $output
                } catch {
                    Stop-Function -Message "Failure" -ErrorRecord $_ -Target $store -Continue
                }
            }
        }
    }
}

tools\dbatools\functions\Import-DbaSpConfigure.ps1

function Import-DbaSpConfigure {
    <#
    .SYNOPSIS
        Updates sp_configure settings on destination server.

    .DESCRIPTION
        Updates sp_configure settings on destination server.

    .PARAMETER Source
        Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.

    .PARAMETER Destination
        Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.

    .PARAMETER SourceSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER DestinationSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER SqlInstance
        Specifies a SQL Server instance to set up sp_configure values on using a SQL file.

    .PARAMETER SqlCredential
        Use this SQL credential if you are setting up sp_configure values from a SQL file.

        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Path
        Specifies the path to a SQL script file holding sp_configure queries for each of the settings to be changed. Export-DbaSPConfigure creates a suitable file as its output.

    .PARAMETER Force
        If this switch is enabled, no version check between Source and Destination is performed. By default, the major and minor versions of Source and Destination must match when copying sp_configure settings.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .NOTES
        Tags: SpConfig, Configure, Configuration
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Import-DbaSpConfigure

    .INPUTS
        None You cannot pipe objects to Import-DbaSpConfigure

    .OUTPUTS
        $true if success
        $false if failure

    .EXAMPLE
        PS C:\> Import-DbaSpConfigure -Source sqlserver -Destination sqlcluster

        Imports the sp_configure settings from the source server sqlserver and sets them on the sqlcluster server using Windows Authentication

    .EXAMPLE
        PS C:\> Import-DbaSpConfigure -Source sqlserver -Destination sqlcluster -Force

        Imports the sp_configure settings from the source server sqlserver and sets them on the sqlcluster server using Windows Authentication. Will not do a version check between Source and Destination

    .EXAMPLE
        PS C:\> Import-DbaSpConfigure -Source sqlserver -Destination sqlcluster -SourceSqlCredential $SourceSqlCredential -DestinationSqlCredential $DestinationSqlCredential

        Imports the sp_configure settings from the source server sqlserver and sets them on the sqlcluster server using the SQL credentials stored in the variables $SourceSqlCredential and $DestinationSqlCredential

    .EXAMPLE
        PS C:\> Import-DbaSpConfigure -SqlInstance sqlserver -Path .\spconfig.sql -SqlCredential $SqlCredential

        Imports the sp_configure settings from the file .\spconfig.sql and sets them on the sqlserver server using the SQL credential stored in the variable $SqlCredential

    #>
    [CmdletBinding(DefaultParameterSetName = "Default", SupportsShouldProcess)]
    param (
        [Parameter(ParameterSetName = "ServerCopy")]
        [DbaInstanceParameter]$Source,
        [Parameter(ParameterSetName = "ServerCopy")]
        [DbaInstanceParameter]$Destination,
        [Parameter(ParameterSetName = "ServerCopy")]
        [PSCredential]$SourceSqlCredential,
        [Parameter(ParameterSetName = "ServerCopy")]
        [PSCredential]$DestinationSqlCredential,
        [Parameter(ParameterSetName = "FromFile")]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter]$SqlInstance,
        [Parameter(ParameterSetName = "FromFile")]
        [string]$Path,
        [Parameter(ParameterSetName = "FromFile")]
        [PSCredential]$SqlCredential,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {

        if ($Path.length -eq 0) {
            try {
                $sourceserver = Connect-SqlInstance -SqlInstance $Source -SqlCredential $SourceSqlCredential
            } catch {
                Stop-Function -Message "Failed to process Instance $Source" -ErrorRecord $_ -Target $Source
                return
            }

            if (!(Test-SqlSa -SqlInstance $sourceserver -SqlCredential $SourceSqlCredential)) {
                Stop-Function -Message "Not a sysadmin on $sourceserver. Quitting." -Category PermissionDenied -ErrorRecord $_ -Target $server -Continue
            }

            try {
                $destserver = Connect-SqlInstance -SqlInstance $Destination -SqlCredential $DestinationSqlCredential
            } catch {
                Stop-Function -Message "Failed to process Instance $Destination" -ErrorRecord $_ -Target $Destination
                return
            }

            if (!(Test-SqlSa -SqlInstance $destserver -SqlCredential $DestinationSqlCredential)) {
                Stop-Function -Message "Not a sysadmin on $destserver. Quitting." -Category PermissionDenied -ErrorRecord $_ -Target $server -Continue
            }

            $source = $sourceserver.DomainInstanceName
            $destination = $destserver.DomainInstanceName
        } else {
            try {
                $server = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failed to process Instance $SqlInstance" -ErrorRecord $_ -Target $SqlInstance -Continue
            }

            if (!(Test-SqlSa -SqlInstance $server -SqlCredential $SqlCredential)) {
                Stop-Function -Message "Not a sysadmin on $server. Quitting." -Category PermissionDenied -ErrorRecord $_ -Target $server -Continue
            }

            if ((Test-Path $Path) -eq $false) {
                Stop-Function -Message "File $Path Not Found" -Category InvalidArgument -Target $Path -Continue
            }
        }

    }
    process {
        if ($Path.length -eq 0) {
            if ($Pscmdlet.ShouldProcess($destination, "Export sp_configure")) {
                $sqlfilename = Export-DbaSpConfigure $sourceserver
            }

            if ($sourceserver.versionMajor -ne $destserver.versionMajor -and $force -eq $false) {
                Write-Message -Level Warning -Message "Source SQL Server major version and Destination SQL Server major version must match for sp_configure migration. Use -Force to override this precaution or check the exported sql file, $sqlfilename, and run manually."
                return
            }

            If ($Pscmdlet.ShouldProcess($destination, "Execute sp_configure")) {
                $sourceserver.Configuration.ShowAdvancedOptions.ConfigValue = $true
                $sourceserver.Configuration.Alter($true)
                $destserver.Configuration.ShowAdvancedOptions.ConfigValue = $true
                $sourceserver.Configuration.Alter($true)

                $destprops = $destserver.Configuration.Properties

                foreach ($sourceprop in $sourceserver.Configuration.Properties) {
                    $displayname = $sourceprop.DisplayName

                    $destprop = $destprops | where-object { $_.Displayname -eq $displayname }
                    if ($null -ne $destprop) {
                        try {
                            $destprop.configvalue = $sourceprop.configvalue
                            $null = $destserver.Query("RECONFIGURE WITH OVERRIDE")
                            Write-Message -Level Output -Message "updated $($destprop.displayname) to $($sourceprop.configvalue)."
                        } catch {
                            Stop-Function -Message "Could not set $($destprop.displayname) to $($sourceprop.configvalue). Feature may not be supported." -ErrorRecord $_ -Continue
                        }
                    }
                }
                try {
                    $destserver.Configuration.Alter()
                } catch {
                    $needsrestart = $true
                }

                $sourceserver.Configuration.ShowAdvancedOptions.ConfigValue = $false
                $sourceserver.Configuration.Alter($true)
                $destserver.Configuration.ShowAdvancedOptions.ConfigValue = $false
                $destserver.Configuration.Alter($true)

                if ($needsrestart -eq $true) {
                    Write-Message -Level Warning -Message "Some configuration options will be updated once SQL Server is restarted."
                } else {
                    Write-Message -Level Output -Message "Configuration option has been updated."
                }
            }

            if ($Pscmdlet.ShouldProcess($destination, "Removing temp file")) {
                Remove-Item $sqlfilename -ErrorAction SilentlyContinue
            }

        } else {
            if ($Pscmdlet.ShouldProcess($destination, "Importing sp_configure from $Path")) {
                $server.Configuration.ShowAdvancedOptions.ConfigValue = $true
                $sql = Get-Content $Path
                foreach ($line in $sql) {
                    try {
                        $null = $server.Query($line)
                        Write-Message -Level Output -Message "Successfully executed $line."
                    } catch {
                        Stop-Function -Message "$line failed. Feature may not be supported." -ErrorRecord $_ -Continue
                    }
                }
                $server.Configuration.ShowAdvancedOptions.ConfigValue = $false
                Write-Message -Level Warning -Message "Some configuration options will be updated once SQL Server is restarted."
            }
        }
    }
    end {
        if ($Path.length -gt 0) {
            $server.ConnectionContext.Disconnect()
        } else {
            $sourceserver.ConnectionContext.Disconnect()
            $destserver.ConnectionContext.Disconnect()
        }

        If ($Pscmdlet.ShouldProcess("console", "Showing finished message")) {
            Write-Message -Level Output -Message "SQL Server configuration options migration finished."
        }

        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Import-SqlSpConfigure
    }
}

tools\dbatools\functions\Import-DbaXESessionTemplate.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Import-DbaXESessionTemplate {
    <#
    .SYNOPSIS
        Imports a new XESession XML Template

    .DESCRIPTION
        Imports a new XESession XML Template either from the dbatools repository or a file you specify.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2008 or higher.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Name
        The Name of the session to create.

    .PARAMETER Path
        The path to the xml file or files for the session(s).

    .PARAMETER Template
        Specifies the name of one of the templates from the dbatools repository. Press tab to cycle through the provided templates.

    .PARAMETER TargetFilePath
        By default, files will be created in the default xel directory. Use TargetFilePath to change all instances of
        filename = "file.xel" to filename = "$TargetFilePath\file.xel". Only specify the directory, not the file itself.

        This path is relative to the destination directory

    .PARAMETER TargetFileMetadataPath
        By default, files will be created in the default xem directory. Use TargetFileMetadataPath to change all instances of
        filename = "file.xem" to filename = "$TargetFilePath\file.xem". Only specify the directory, not the file itself.

        This path is relative to the destination directory

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: ExtendedEvent, XE, XEvent
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Import-DbaXESessionTemplate

    .EXAMPLE
        PS C:\> Import-DbaXESessionTemplate -SqlInstance sql2017 -Template db_query_wait_stats

        Creates a new XESession named db_query_wait_stats from the dbatools repository to the SQL Server sql2017.

    .EXAMPLE
        PS C:\> Import-DbaXESessionTemplate -SqlInstance sql2017 -Template db_query_wait_stats -Name "Query Wait Stats"

        Creates a new XESession named "Query Wait Stats" using the db_query_wait_stats template.

    .EXAMPLE
        PS C:\> Get-DbaXESession -SqlInstance sql2017 -Session db_ola_health | Remove-DbaXESession
        PS C:\> Import-DbaXESessionTemplate -SqlInstance sql2017 -Template db_ola_health | Start-DbaXESession

        Imports a session if it exists, then recreates it using a template.

    .EXAMPLE
        PS C:\> Get-DbaXESessionTemplate | Out-GridView -PassThru | Import-DbaXESessionTemplate -SqlInstance sql2017

        Allows you to select a Session template then import to an instance named sql2017.

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string]$Name,
        [parameter(ValueFromPipelineByPropertyName)]
        [Alias("FullName")]
        [string[]]$Path,
        [string[]]$Template,
        [string]$TargetFilePath,
        [string]$TargetFileMetadataPath,
        [switch]$EnableException
    )
    begin {
        $metadata = Import-Clixml "$script:PSModuleRoot\bin\xetemplates-metadata.xml"
    }
    process {
        if ((Test-Bound -ParameterName Path -Not) -and (Test-Bound -ParameterName Template -Not)) {
            Stop-Function -Message "You must specify Path or Template."
        }

        if (($Path.Count -gt 1 -or $Template.Count -gt 1) -and (Test-Bound -ParameterName Template)) {
            Stop-Function -Message "Name cannot be specified with multiple files or templates because the Session will already exist."
        }

        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 11
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $SqlConn = $server.ConnectionContext.SqlConnectionObject
            $SqlStoreConnection = New-Object Microsoft.SqlServer.Management.Sdk.Sfc.SqlStoreConnection $SqlConn
            $store = New-Object  Microsoft.SqlServer.Management.XEvent.XEStore $SqlStoreConnection

            foreach ($file in $template) {
                $templatepath = "$script:PSModuleRoot\bin\xetemplates\$file.xml"
                if ((Test-Path $templatepath)) {
                    $Path += $templatepath
                } else {
                    Stop-Function -Message "Invalid template ($templatepath does not exist)." -Continue
                }
            }

            foreach ($file in $Path) {

                if ((Test-Bound -Not -ParameterName TargetFilePath)) {
                    Write-Message -Level Verbose -Message "Importing $file to $instance"
                    try {
                        $xml = [xml](Get-Content $file -ErrorAction Stop)
                    } catch {
                        Stop-Function -Message "Failure" -ErrorRecord $_ -Target $file -Continue
                    }
                } else {
                    Write-Message -Level Verbose -Message "TargetFilePath specified, changing all file locations in $file for $instance."
                    Write-Message -Level Verbose -Message "TargetFileMetadataPath specified, changing all metadata file locations in $file for $instance."

                    # Handle whatever people specify
                    $TargetFilePath = $TargetFilePath.TrimEnd("\")
                    $TargetFileMetadataPath = $TargetFileMetadataPath.TrimEnd("\")
                    $TargetFilePath = "$TargetFilePath\"
                    $TargetFileMetadataPath = "$TargetFileMetadataPath\"

                    # Perform replace
                    $xelphrase = 'name="filename" value="'
                    $xemphrase = 'name="metadatafile" value="'

                    try {
                        $basename = (Get-ChildItem $file).Basename
                        $contents = Get-Content $file -ErrorAction Stop
                        $contents = $contents.Replace($xelphrase, "$xelphrase$TargetFilePath")
                        $contents = $contents.Replace($xemphrase, "$xemphrase$TargetFileMetadataPath")
                        $temp = ([System.IO.Path]::GetTempPath()).TrimEnd("").TrimEnd("\")
                        $tempfile = "$temp\$basename"
                        $null = Set-Content -Path $tempfile -Value $contents -Encoding UTF8
                        $xml = [xml](Get-Content $tempfile -ErrorAction Stop)
                        $file = $tempfile
                    } catch {
                        Stop-Function -Message "Failure" -ErrorRecord $_ -Target $file -Continue
                    }

                    Write-Message -Level Verbose -Message "$TargetFilePath does not exist on $server, creating now."
                    try {
                        if (-not (Test-DbaPath -SqlInstance $server -Path $TargetFilePath)) {
                            $null = New-DbaDirectory -SqlInstance $server -Path $TargetFilePath
                        }
                    } catch {
                        Stop-Function -Message "Failure" -ErrorRecord $_ -Target $file -Continue
                    }
                }

                if (-not $xml.event_sessions) {
                    Stop-Function -Message "$file is not a valid XESession template document." -Continue
                }

                if ((Test-Bound -ParameterName Name -not)) {
                    $Name = (Get-ChildItem $file).BaseName
                }

                # This could be done better but not today
                $no2012 = ($metadata | Where-Object Compatibility -gt 2012).Name
                $no2014 = ($metadata | Where-Object Compatibility -gt 2014).Name

                if ($Name -in $no2012 -and $server.VersionMajor -eq 11) {
                    Stop-Function -Message "$Name is not supported in SQL Server 2012 ($server)" -Continue
                }

                if ($Name -in $no2014 -and $server.VersionMajor -eq 12) {
                    Stop-Function -Message "$Name is not supported in SQL Server 2014 ($server)" -Continue
                }

                if ((Get-DbaXESession -SqlInstance $server -Session $Name)) {
                    Stop-Function -Message "$Name already exists on $instance" -Continue
                }

                try {
                    Write-Message -Level Verbose -Message "Importing $file as $name "
                    $session = $store.CreateSessionFromTemplate($Name, $file)
                    $session.Create()
                    if ($file -eq $tempfile) {
                        Remove-Item $tempfile -ErrorAction SilentlyContinue
                    }
                    Get-DbaXESession -SqlInstance $server -Session $session.Name
                } catch {
                    Stop-Function -Message "Failure" -ErrorRecord $_ -Target $store -Continue
                }
            }
        }
    }
}

tools\dbatools\functions\Install-DbaFirstResponderKit.ps1

#ValidationTags#CodeStyle,Messaging,FlowControl,Pipeline#
function Install-DbaFirstResponderKit {
    <#
    .SYNOPSIS
        Installs or updates the First Responder Kit stored procedures.

    .DESCRIPTION
        Downloads, extracts and installs the First Responder Kit stored procedures:
        sp_Blitz, sp_BlitzWho, sp_BlitzFirst, sp_BlitzIndex, sp_BlitzCache and sp_BlitzTrace, etc.

        First Responder Kit links:
        http://FirstResponderKit.org
        https://github.com/BrentOzarULTD/SQL-Server-First-Responder-Kit

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        Specifies the database to instal the First Responder Kit stored procedures into

    .PARAMETER Branch
        Specifies an alternate branch of the First Responder Kit to install. (master or dev)

    .PARAMETER LocalFile
        Specifies the path to a local file to install FRK from. This *should* be the zipfile as distributed by the maintainers.
        If this parameter is not specified, the latest version will be downloaded and installed from https://github.com/BrentOzarULTD/SQL-Server-First-Responder-Kit

    .PARAMETER Force
        If this switch is enabled, the FRK will be downloaded from the internet even if previously cached.

    .PARAMETER Confirm
        Prompts to confirm actions

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: BrentOzar, FRK, FirstResponderKit
        Author: Tara Kizer, Brent Ozar Unlimited (https://www.brentozar.com/)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Install-DbaFirstResponderKit

    .EXAMPLE
        PS C:\> Install-DbaFirstResponderKit -SqlInstance server1 -Database master

        Logs into server1 with Windows authentication and then installs the FRK in the master database.

    .EXAMPLE
        PS C:\> Install-DbaFirstResponderKit -SqlInstance server1\instance1 -Database DBA

        Logs into server1\instance1 with Windows authentication and then installs the FRK in the DBA database.

    .EXAMPLE
        PS C:\> Install-DbaFirstResponderKit -SqlInstance server1\instance1 -Database master -SqlCredential $cred

        Logs into server1\instance1 with SQL authentication and then installs the FRK in the master database.

    .EXAMPLE
        PS C:\> Install-DbaFirstResponderKit -SqlInstance sql2016\standardrtm, sql2016\sqlexpress, sql2014

        Logs into sql2016\standardrtm, sql2016\sqlexpress and sql2014 with Windows authentication and then installs the FRK in the master database.

    .EXAMPLE
        PS C:\> $servers = "sql2016\standardrtm", "sql2016\sqlexpress", "sql2014"
        PS C:\> $servers | Install-DbaFirstResponderKit

        Logs into sql2016\standardrtm, sql2016\sqlexpress and sql2014 with Windows authentication and then installs the FRK in the master database.

    .EXAMPLE
        PS C:\> Install-DbaFirstResponderKit -SqlInstance sql2016 -Branch dev

        Installs the dev branch version of the FRK in the master database on sql2016 instance.

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [Parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [ValidateSet('master', 'dev')]
        [string]$Branch = "master",
        [object]$Database = "master",
        [string]$LocalFile,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        $DbatoolsData = Get-DbatoolsConfigValue -FullName "Path.DbatoolsData"

        if (-not $DbatoolsData) {
            $DbatoolsData = ([System.IO.Path]::GetTempPath()).TrimEnd("\")
        }

        $url = "https://github.com/BrentOzarULTD/SQL-Server-First-Responder-Kit/archive/$Branch.zip"

        $temp = ([System.IO.Path]::GetTempPath()).TrimEnd("\")
        $zipfile = "$temp\SQL-Server-First-Responder-Kit-$Branch.zip"
        $zipfolder = "$temp\SQL-Server-First-Responder-Kit-$Branch\"
        $FRKLocation = "FRK_$Branch"
        $LocalCachedCopy = Join-Path -Path $DbatoolsData -ChildPath $FRKLocation
        if ($LocalFile) {
            if (-not(Test-Path $LocalFile)) {
                Stop-Function -Message "$LocalFile doesn't exist"
                return
            }
            if (-not($LocalFile.EndsWith('.zip'))) {
                Stop-Function -Message "$LocalFile should be a zip file"
                return
            }
        }

        if ($Force -or -not(Test-Path -Path $LocalCachedCopy -PathType Container) -or $LocalFile) {
            # Force was passed, or we don't have a local copy, or $LocalFile was passed
            if ($zipfile | Test-Path) {
                Remove-Item -Path $zipfile -ErrorAction SilentlyContinue
            }
            if ($zipfolder | Test-Path) {
                Remove-Item -Path $zipfolder -Recurse -ErrorAction SilentlyContinue
            }

            $null = New-Item -ItemType Directory -Path $zipfolder -ErrorAction SilentlyContinue
            if ($LocalFile) {
                Unblock-File $LocalFile -ErrorAction SilentlyContinue
                Expand-Archive -Path $LocalFile -DestinationPath $zipfolder -Force
            } else {
                Write-Message -Level Verbose -Message "Downloading and unzipping the First Responder Kit zip file."

                try {

                    try {
                        Invoke-TlsWebRequest $url -OutFile $zipfile -ErrorAction Stop -UseBasicParsing
                    } catch {
                        # Try with default proxy and usersettings
                        (New-Object System.Net.WebClient).Proxy.Credentials = [System.Net.CredentialCache]::DefaultNetworkCredentials
                        Invoke-TlsWebRequest $url -OutFile $zipfile -ErrorAction Stop -UseBasicParsing
                    }


                    # Unblock if there's a block
                    Unblock-File $zipfile -ErrorAction SilentlyContinue

                    Expand-Archive -Path $zipfile -DestinationPath $zipfolder -Force

                    Remove-Item -Path $zipfile
                } catch {
                    Stop-Function -Message "Couldn't download the First Responder Kit. Download and install manually from https://github.com/BrentOzarULTD/SQL-Server-First-Responder-Kit/archive/$Branch.zip." -ErrorRecord $_
                    return
                }
            }

            ## Copy it into local area
            if (Test-Path -Path $LocalCachedCopy -PathType Container) {
                Remove-Item -Path (Join-Path $LocalCachedCopy '*') -Recurse -ErrorAction SilentlyContinue
            } else {
                $null = New-Item -Path $LocalCachedCopy -ItemType Container
            }
            Copy-Item -Path $zipfolder -Destination $LocalCachedCopy -Recurse
        }
    }


    process {
        if (Test-FunctionInterrupt) {
            return
        }

        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure." -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            Write-Message -Level Verbose -Message "Starting installing/updating the First Responder Kit stored procedures in $database on $instance."
            $allprocedures_query = "select name from sys.procedures where is_ms_shipped = 0"
            $allprocedures = ($server.Query($allprocedures_query, $Database)).Name
            # Install/Update each FRK stored procedure
            foreach ($script in (Get-ChildItem $LocalCachedCopy -Recurse -Filter "sp_*.sql")) {
                $scriptname = $script.Name
                $scriptError = $false
                if ($scriptname -ne "sp_BlitzRS.sql") {

                    if ($scriptname -eq "sp_BlitzQueryStore.sql") {
                        if ($server.VersionMajor -lt 13) { continue }
                    }
                    if ($Pscmdlet.ShouldProcess($instance, "installing/updating $scriptname in $database.")) {
                        try {
                            Invoke-DbaQuery -SqlInstance $server -Database $Database -File $script.FullName -EnableException -Verbose:$false
                        } catch {
                            Write-Message -Level Warning -Message "Could not execute at least one portion of $scriptname in $Database on $instance." -ErrorRecord $_
                            $scriptError = $true
                        }
                        $baseres = @{
                            ComputerName = $server.ComputerName
                            InstanceName = $server.ServiceName
                            SqlInstance  = $server.DomainInstanceName
                            Database     = $Database
                            Name         = $script.BaseName
                        }
                        if ($scriptError) {
                            $baseres['Status'] = 'Error'
                        } elseif ($script.BaseName -in $allprocedures) {
                            $baseres['Status'] = 'Updated'
                        } else {
                            $baseres['Status'] = 'Installed'
                        }
                        [PSCustomObject]$baseres
                    }
                }
            }
            Write-Message -Level Verbose -Message "Finished installing/updating the First Responder Kit stored procedures in $database on $instance."
        }
    }
}

tools\dbatools\functions\Install-DbaMaintenanceSolution.ps1

#ValidationTags#CodeStyle,Messaging,FlowControl,Pipeline#
function Install-DbaMaintenanceSolution {
    <#
    .SYNOPSIS
        Download and Install SQL Server Maintenance Solution created by Ola Hallengren (https://ola.hallengren.com)

    .DESCRIPTION
        This script will download and install the latest version of SQL Server Maintenance Solution created by Ola Hallengren

    .PARAMETER SqlInstance
        The target SQL Server instance onto which the Maintenance Solution will be installed.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The database where Ola Hallengren's solution will be installed. Defaults to master.

    .PARAMETER BackupLocation
        Location of the backup root directory. If this is not supplied, the default backup directory will be used.

    .PARAMETER CleanupTime
        Time in hours, after which backup files are deleted.

    .PARAMETER OutputFileDirectory
        Specify the output file directory where the Maintenance Solution will write to.

    .PARAMETER ReplaceExisting
        If this switch is enabled, objects already present in the target database will be dropped and recreated.

    .PARAMETER LogToTable
        If this switch is enabled, the Maintenance Solution will be configured to log commands to a table.

    .PARAMETER Solution
        Specifies which portion of the Maintenance solution to install. Valid values are All (full solution), Backup, IntegrityCheck and IndexOptimize.

    .PARAMETER InstallJobs
        If this switch is enabled, the corresponding SQL Agent Jobs will be created.

    .PARAMETER LocalFile
        Specifies the path to a local file to install Ola's solution from. This *should* be the zipfile as distributed by the maintainers.
        If this parameter is not specified, the latest version will be downloaded and installed from https://github.com/olahallengren/sql-server-maintenance-solution

    .PARAMETER Force
        If this switch is enabled, the Ola's solution will be downloaded from the internet even if previously cached.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Ola, Maintenance
        Author: Viorel Ciucu, cviorel.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        http://dbatools.io/Install-DbaMaintenanceSolution

    .EXAMPLE
        PS C:\> Install-DbaMaintenanceSolution -SqlInstance RES14224 -Database DBA -CleanupTime 72

        Installs Ola Hallengren's Solution objects on RES14224 in the DBA database.
        Backups will default to the default Backup Directory.
        If the Maintenance Solution already exists, the script will be halted.

    .EXAMPLE
        PS C:\> Install-DbaMaintenanceSolution -SqlInstance RES14224 -Database DBA -BackupLocation "Z:\SQLBackup" -CleanupTime 72

        This will create the Ola Hallengren's Solution objects. Existing objects are not affected in any way.

    .EXAMPLE
        PS C:\> Install-DbaMaintenanceSolution -SqlInstance RES14224 -Database DBA -BackupLocation "Z:\SQLBackup" -CleanupTime 72 -ReplaceExisting

        This will drop and then recreate the Ola Hallengren's Solution objects
        The cleanup script will drop and recreate:
        - TABLE [dbo].[CommandLog]
        - STORED PROCEDURE [dbo].[CommandExecute]
        - STORED PROCEDURE [dbo].[DatabaseBackup]
        - STORED PROCEDURE [dbo].[DatabaseIntegrityCheck]
        - STORED PROCEDURE [dbo].[IndexOptimize]

        The following SQL Agent jobs will be deleted:
        - 'Output File Cleanup'
        - 'IndexOptimize - USER_DATABASES'
        - 'sp_delete_backuphistory'
        - 'DatabaseBackup - USER_DATABASES - LOG'
        - 'DatabaseBackup - SYSTEM_DATABASES - FULL'
        - 'DatabaseBackup - USER_DATABASES - FULL'
        - 'sp_purge_jobhistory'
        - 'DatabaseIntegrityCheck - SYSTEM_DATABASES'
        - 'CommandLog Cleanup'
        - 'DatabaseIntegrityCheck - USER_DATABASES'
        - 'DatabaseBackup - USER_DATABASES - DIFF'

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "Medium")]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseSingularNouns", "", Justification = "Internal functions are ignored")]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [DbaInstance[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [object]$Database = "master",
        [string]$BackupLocation,
        [int]$CleanupTime,
        [string]$OutputFileDirectory,
        [switch]$ReplaceExisting,
        [switch]$LogToTable,
        [ValidateSet('All', 'Backup', 'IntegrityCheck', 'IndexOptimize')]
        [string]$Solution = 'All',
        [switch]$InstallJobs,
        [string]$LocalFile,
        [switch]$Force,
        [switch]$EnableException
    )

    begin {
        if ($InstallJobs -and $Solution -ne 'All') {
            Stop-Function -Message "Jobs can only be created for all solutions. To create SQL Agent jobs you need to use '-Solution All' (or not specify the Solution and let it default to All) and '-InstallJobs'."
            return
        }

        if ((Test-Bound -ParameterName CleanupTime) -and -not $InstallJobs) {
            Stop-Function -Message "CleanupTime is only useful when installing jobs. To install jobs, please use '-InstallJobs' in addition to CleanupTime."
            return
        }

        if ($ReplaceExisting -eq $true) {
            Write-Message -Level Verbose -Message "If Ola Hallengren's scripts are found, we will drop and recreate them!"
        }

        $DbatoolsData = Get-DbatoolsConfigValue -FullName "Path.DbatoolsData"

        $url = "https://github.com/olahallengren/sql-server-maintenance-solution/archive/master.zip"

        $temp = ([System.IO.Path]::GetTempPath()).TrimEnd("\")
        $zipfile = "$temp\ola-sql-server-maintenance-solution.zip"
        $zipfolder = "$temp\ola-sql-server-maintenance-solution\"
        $OLALocation = "OLA_SQL_MAINT_master"
        $LocalCachedCopy = Join-Path -Path $DbatoolsData -ChildPath $OLALocation
        if ($LocalFile) {
            if (-not (Test-Path $LocalFile)) {
                Stop-Function -Message "$LocalFile doesn't exist"
                return
            }
            if (-not ($LocalFile.EndsWith('.zip'))) {
                Stop-Function -Message "$LocalFile should be a zip file"
                return
            }
        }

        if ($Force -or -not (Test-Path -Path $LocalCachedCopy -PathType Container) -or $LocalFile) {
            # Force was passed, or we don't have a local copy, or $LocalFile was passed
            if ($zipfile | Test-Path) {
                Remove-Item -Path $zipfile -ErrorAction SilentlyContinue
            }
            if ($zipfolder | Test-Path) {
                Remove-Item -Path $zipfolder -Recurse -ErrorAction SilentlyContinue
            }

            $null = New-Item -ItemType Directory -Path $zipfolder -ErrorAction SilentlyContinue
            if ($LocalFile) {
                Unblock-File $LocalFile -ErrorAction SilentlyContinue
                Expand-Archive -Path $LocalFile -DestinationPath $zipfolder -Force
            } else {
                Write-Message -Level Verbose -Message "Downloading and unzipping Ola's maintenance solution zip file."

                try {
                    try {
                        Invoke-TlsWebRequest $url -OutFile $zipfile -ErrorAction Stop -UseBasicParsing
                    } catch {
                        # Try with default proxy and usersettings
                        (New-Object System.Net.WebClient).Proxy.Credentials = [System.Net.CredentialCache]::DefaultNetworkCredentials
                        Invoke-TlsWebRequest $url -OutFile $zipfile -ErrorAction Stop -UseBasicParsing
                    }

                    # Unblock if there's a block
                    Unblock-File $zipfile -ErrorAction SilentlyContinue

                    Expand-Archive -Path $zipfile -DestinationPath $zipfolder -Force

                    Remove-Item -Path $zipfile
                } catch {
                    Stop-Function -Message "Couldn't download Ola's maintenance solution. Download and install manually from https://github.com/olahallengren/sql-server-maintenance-solution/archive/master.zip." -ErrorRecord $_
                    return
                }
            }

            ## Copy it into local area
            if (Test-Path -Path $LocalCachedCopy -PathType Container) {
                Remove-Item -Path (Join-Path $LocalCachedCopy '*') -Recurse -ErrorAction SilentlyContinue
            } else {
                $null = New-Item -Path $LocalCachedCopy -ItemType Container
            }
            Copy-Item -Path $zipfolder -Destination $LocalCachedCopy -Recurse
        }

        function Get-DbaOlaWithParameters($listOfFiles) {

            $fileContents = @{ }
            foreach ($file in $listOfFiles) {
                $fileContents[$file] = Get-Content -Path $file -Raw
            }

            foreach ($file in $($fileContents.Keys)) {
                # In which database we install
                if ($Database -ne 'master') {
                    $findDB = 'USE [master]'
                    $replaceDB = 'USE [' + $Database + ']'
                    $fileContents[$file] = $fileContents[$file].Replace($findDB, $replaceDB)
                }

                # Backup location
                if ($BackupLocation) {
                    $findBKP = 'SET @BackupDirectory     = NULL'
                    $replaceBKP = 'SET @BackupDirectory     = N''' + $BackupLocation + ''''
                    $fileContents[$file] = $fileContents[$file].Replace($findBKP, $replaceBKP)
                }

                # CleanupTime
                if ($CleanupTime -ne 0) {
                    $findCleanupTime = 'SET @CleanupTime         = NULL'
                    $replaceCleanupTime = 'SET @CleanupTime         = ' + $CleanupTime
                    $fileContents[$file] = $fileContents[$file].Replace($findCleanupTime, $replaceCleanupTime)
                }

                # OutputFileDirectory
                if (-not $OutputFileDirectory) {
                    $findOutputFileDirectory = 'SET @OutputFileDirectory = NULL'
                    $replaceOutputFileDirectory = 'SET @OutputFileDirectory = N''' + $OutputFileDirectory + ''''
                    $fileContents[$file] = $fileContents[$file].Replace($findOutputFileDirectory, $replaceOutputFileDirectory)
                }

                # LogToTable
                if (!$LogToTable) {
                    $findLogToTable = "SET @LogToTable          = 'Y'"
                    $replaceLogToTable = "SET @LogToTable          = 'N'"
                    $fileContents[$file] = $fileContents[$file].Replace($findLogToTable, $replaceLogToTable)
                }

                # Create Jobs
                if (-not $InstallJobs) {
                    $findCreateJobs = "SET @CreateJobs          = 'Y'"
                    $replaceCreateJobs = "SET @CreateJobs          = 'N'"
                    $fileContents[$file] = $fileContents[$file].Replace($findCreateJobs, $replaceCreateJobs)
                }
            }
            return $fileContents
        }
    }

    process {
        if (Test-FunctionInterrupt) {
            return
        }

        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -NonPooled
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            if ((Test-Bound -ParameterName ReplaceExisting -Not)) {
                $procs = Get-DbaModule -SqlInstance $server -Database $Database | Where-Object Name -in 'CommandExecute', 'DatabaseBackup', 'DatabaseIntegrityCheck', 'IndexOptimize'
                $table = Get-DbaDbTable -SqlInstance $server -Database $Database -Table CommandLog -IncludeSystemDBs | Where-Object Database -eq $Database

                if ($null -ne $procs -or $null -ne $table) {
                    Stop-Function -Message "The Maintenance Solution already exists in $Database on $instance. Use -ReplaceExisting to automatically drop and recreate."
                    return
                }
            }

            if ((Test-Bound -ParameterName BackupLocation -Not)) {
                $BackupLocation = (Get-DbaDefaultPath -SqlInstance $server).Backup
            }

            Write-Message -Level Output -Message "Ola Hallengren's solution will be installed on database $Database."

            $db = $server.Databases[$Database]

            # Required
            $required = @('CommandExecute.sql')

            if ($LogToTable) {
                $required += 'CommandLog.sql'
            }

            if ($Solution -match 'Backup') {
                $required += 'DatabaseBackup.sql'
            }

            if ($Solution -match 'IntegrityCheck') {
                $required += 'DatabaseIntegrityCheck.sql'
            }

            if ($Solution -match 'IndexOptimize') {
                $required += 'IndexOptimize.sql'
            }

            if ($Solution -match 'All') {
                $required += 'MaintenanceSolution.sql'
            }

            $temp = ([System.IO.Path]::GetTempPath()).TrimEnd("\")
            $zipfile = "$temp\ola.zip"


            $listOfFiles = Get-ChildItem -Filter "*.sql" -Path $LocalCachedCopy -Recurse | Select-Object -ExpandProperty FullName

            $fileContents = Get-DbaOlaWithParameters -listOfFiles $listOfFiles

            $CleanupQuery = $null
            if ($ReplaceExisting) {
                [string]$CleanupQuery = $("
                            IF OBJECT_ID('[dbo].[CommandLog]', 'U') IS NOT NULL
                                DROP TABLE [dbo].[CommandLog];
                            IF OBJECT_ID('[dbo].[CommandExecute]', 'P') IS NOT NULL
                                DROP PROCEDURE [dbo].[CommandExecute];
                            IF OBJECT_ID('[dbo].[DatabaseBackup]', 'P') IS NOT NULL
                                DROP PROCEDURE [dbo].[DatabaseBackup];
                            IF OBJECT_ID('[dbo].[DatabaseIntegrityCheck]', 'P') IS NOT NULL
                                DROP PROCEDURE [dbo].[DatabaseIntegrityCheck];
                            IF OBJECT_ID('[dbo].[IndexOptimize]', 'P') IS NOT NULL
                                DROP PROCEDURE [dbo].[IndexOptimize];
                            ")

                Write-Message -Level Output -Message "Dropping objects created by Ola's Maintenance Solution"
                $null = $db.Query($CleanupQuery)

                # Remove Ola's Jobs
                if ($InstallJobs -and $ReplaceExisting) {
                    Write-Message -Level Output -Message "Removing existing SQL Agent Jobs created by Ola's Maintenance Solution."
                    $jobs = Get-DbaAgentJob -SqlInstance $server | Where-Object Description -match "hallengren"
                    if ($jobs) {
                        $jobs | ForEach-Object { Remove-DbaAgentJob -SqlInstance $instance -Job $_.name }
                    }
                }
            }

            try {
                Write-Message -Level Output -Message "Installing on server $instance, database $Database."

                foreach ($file in $fileContents.Keys) {
                    $shortFileName = Split-Path $file -Leaf
                    if ($required.Contains($shortFileName)) {
                        Write-Message -Level Output -Message "Installing $shortFileName."
                        $sql = $fileContents[$file]
                        try {
                            foreach ($query in ($sql -Split "\nGO\b")) {
                                $null = $db.Query($query)
                            }
                        } catch {
                            Stop-Function -Message "Could not execute $shortFileName in $Database on $instance." -ErrorRecord $_ -Target $db -Continue
                        }
                    }
                }
            } catch {
                Stop-Function -Message "Could not execute $shortFileName in $Database on $instance." -ErrorRecord $_ -Target $db -Continue
            }
        }
        # Only here due to need for non-pooled connection in this command
        try {
            $server.ConnectionContext.Disconnect()
        } catch {
            # here to avoid an empty catch
            $null = 1
        }

        Write-Message -Level Output -Message "Installation complete."
    }
}

tools\dbatools\functions\Install-DbaSqlWatch.ps1

#ValidationTags#CodeStyle,Messaging,FlowControl,Pipeline#
function Install-DbaSqlWatch {
    <#
    .SYNOPSIS
        Installs or updates SqlWatch.

    .DESCRIPTION
        Downloads, extracts and installs or updates SqlWatch.
        https://sqlwatch.io/

    .PARAMETER SqlInstance
        SQL Server name or SMO object representing the SQL Server to connect to.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        Specifies the database to install SqlWatch into. Defaults to SQLWATCH.

    .PARAMETER LocalFile
        Specifies the path to a local file to install SqlWatch from. This *should* be the zipfile as distributed by the maintainers.
        If this parameter is not specified, the latest version will be downloaded and installed from https://github.com/marcingminski/sqlwatch

    .PARAMETER Force
        If this switch is enabled, SqlWatch will be downloaded from the internet even if previously cached.

    .PARAMETER Confirm
        Prompts to confirm actions

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: SqlWatch
        Author: Ken K (github.com/koglerk)
        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Install-DbaSqlWatch

    .EXAMPLE
        Install-DbaSqlWatch -SqlInstance server1

        Logs into server1 with Windows authentication and then installs SqlWatch in the SQLWATCH database.

    .EXAMPLE
        Install-DbaSqlWatch -SqlInstance server1\instance1 -Database DBA

        Logs into server1\instance1 with Windows authentication and then installs SqlWatch in the DBA database.

    .EXAMPLE
        Install-DbaSqlWatch -SqlInstance server1\instance1 -Database DBA -SqlCredential $cred

        Logs into server1\instance1 with SQL authentication and then installs SqlWatch in the DBA database.

    .EXAMPLE
        Install-DbaSqlWatch -SqlInstance sql2016\standardrtm, sql2016\sqlexpress, sql2014

        Logs into sql2016\standardrtm, sql2016\sqlexpress and sql2014 with Windows authentication and then installs SqlWatch in the SQLWATCH database.

    .EXAMPLE
        $servers = "sql2016\standardrtm", "sql2016\sqlexpress", "sql2014"
        $servers | Install-DbaSqlWatch

        Logs into sql2016\standardrtm, sql2016\sqlexpress and sql2014 with Windows authentication and then installs SqlWatch in the SQLWATCH database.
    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "Low")]
    param (
        [Parameter(Mandatory, ValueFromPipeline)]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string]$Database = "SQLWATCH",
        [string]$LocalFile,
        [switch]$Force,
        [switch]$EnableException
    )
    begin {
        $stepCounter = 0

        $DbatoolsData = Get-DbatoolsConfigValue -FullName "Path.DbatoolsData"
        $tempFolder = ([System.IO.Path]::GetTempPath()).TrimEnd("\")
        $zipfile = "$tempFolder\SqlWatch.zip"

        if (-not $LocalFile) {
            if ($PSCmdlet.ShouldProcess($env:computername, "Downloading latest release from GitHub")) {
                Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Downloading latest release from GitHub"
                # query the releases to find the latest, check and see if its cached
                $ReleasesUrl = "https://api.github.com/repos/marcingminski/sqlwatch/releases"
                $DownloadBase = "https://github.com/marcingminski/sqlwatch/releases/download/"

                Write-Message -Level Verbose -Message "Checking GitHub for the latest release."
                $LatestReleaseUrl = (Invoke-TlsWebRequest -UseBasicParsing -Uri $ReleasesUrl | ConvertFrom-Json)[0].assets[0].browser_download_url

                Write-Message -Level VeryVerbose -Message "Latest release is available at $LatestReleaseUrl"
                $LocallyCachedZip = Join-Path -Path $DbatoolsData -ChildPath $($LatestReleaseUrl -replace $DownloadBase, '');

                # if local cached copy exists, use it, otherwise download a new one
                if (-not $Force) {

                    # download from github
                    Write-Message -Level Verbose "Downloading $LatestReleaseUrl"
                    try {
                        Invoke-TlsWebRequest $LatestReleaseUrl -OutFile $zipfile -ErrorAction Stop -UseBasicParsing
                    } catch {
                        #try with default proxy and usersettings
                        (New-Object System.Net.WebClient).Proxy.Credentials = [System.Net.CredentialCache]::DefaultNetworkCredentials
                        Invoke-TlsWebRequest $LatestReleaseUrl -OutFile $zipfile -ErrorAction Stop -UseBasicParsing
                    }

                    # copy the file from temp to local cache
                    Write-Message -Level Verbose "Copying $zipfile to $LocallyCachedZip"
                    try {
                        New-Item -Path $LocallyCachedZip -ItemType File -Force | Out-Null
                        Copy-Item -Path $zipfile -Destination $LocallyCachedZip -Force
                    } catch {
                        # should we stop the function if the file copy fails?
                        # here to avoid an empty catch
                        $null = 1
                    }
                }
            }
        } else {

            # $LocalFile was passed, so use it
            if ($PSCmdlet.ShouldProcess($env:computername, "Copying local file to temp directory")) {

                if ($LocalFile.EndsWith("zip")) {
                    $LocallyCachedZip = $zipfile
                    Copy-Item -Path $LocalFile -Destination $LocallyCachedZip -Force
                } else {
                    $LocallyCachedZip = (Join-Path -path $tempFolder -childpath "SqlWatch.zip")
                    Copy-Item -Path $LocalFile -Destination $LocallyCachedZip -Force
                }
            }
        }

        # expand the zip file
        if ($PSCmdlet.ShouldProcess($env:computername, "Unpacking zipfile")) {
            Write-Message -Level VeryVerbose "Unblocking $LocallyCachedZip"
            Unblock-File $LocallyCachedZip -ErrorAction SilentlyContinue
            $LocalCacheFolder = Split-Path $LocallyCachedZip -Parent

            Write-Message -Level Verbose "Extracting $LocallyCachedZip to $LocalCacheFolder"
            if (Get-Command -ErrorAction SilentlyContinue -Name "Expand-Archive") {
                try {
                    Expand-Archive -Path $LocallyCachedZip -DestinationPath $LocalCacheFolder -Force
                } catch {
                    Stop-Function -Message "Unable to extract $LocallyCachedZip. Archive may not be valid." -ErrorRecord $_
                    return
                }
            } else {
                # Keep it backwards compatible
                $shell = New-Object -ComObject Shell.Application
                $zipPackage = $shell.NameSpace($LocallyCachedZip)
                $destinationFolder = $shell.NameSpace($LocalCacheFolder)
                Get-ChildItem "$LocalCacheFolder\SqlWatch.zip" | Remove-Item
                $destinationFolder.CopyHere($zipPackage.Items())
            }

            Write-Message -Level VeryVerbose "Deleting $LocallyCachedZip"
            Remove-Item -Path $LocallyCachedZip
        }
    }
    process {
        if (Test-FunctionInterrupt) {
            return
        }

        foreach ($instance in $SqlInstance) {
            if ($PSCmdlet.ShouldProcess($instance, "Installing SqlWatch on $Database")) {
                try {
                    $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
                } catch {
                    Stop-Function -Message "Failure." -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
                }

                Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Starting installing/updating SqlWatch in $database on $instance"


                try {
                    # create a publish profile and publish DACPAC
                    $DacPacPath = Get-ChildItem -Filter "SqlWatch.dacpac" -Path $LocalCacheFolder -Recurse | Select-Object -ExpandProperty FullName
                    $PublishOptions = @{
                        RegisterDataTierApplication = $true
                    }

                    Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Publishing SqlWatch dacpac to $database on $instance"
                    $DacProfile = New-DbaDacProfile -SqlInstance $server -Database $Database -Path $LocalCacheFolder -PublishOptions $PublishOptions | Select-Object -ExpandProperty FileName
                    $PublishResults = Publish-DbaDacPackage -SqlInstance $server -Database $Database -Path $DacPacPath -PublishXml $DacProfile

                    # parse results
                    $parens = Select-String -InputObject $PublishResults.Result -Pattern "\(([^\)]+)\)" -AllMatches
                    if ($parens.matches) {
                        $ExtractedResult = $parens.matches | Select-Object -Last 1
                    }

                    [PSCustomObject]@{
                        ComputerName = $PublishResults.ComputerName
                        InstanceName = $PublishResults.InstanceName
                        SqlInstance  = $PublishResults.SqlInstance
                        Database     = $PublishResults.Database
                        Status       = $ExtractedResult
                    }
                } catch {
                    Stop-Function -Message "DACPAC failed to publish to $database on $instance." -ErrorRecord $_ -Target $instance -Continue
                }

                Write-Message -Level Verbose -Message "Finished installing/updating SqlWatch in $database on $instance."
            }
        }
    }
}

tools\dbatools\functions\Install-DbaWatchUpdate.ps1

function Install-DbaWatchUpdate {
    <#
    .SYNOPSIS
        Adds the scheduled task to support Watch-DbaUpdate.

    .DESCRIPTION
        Adds the scheduled task to support Watch-DbaUpdate.

    .PARAMETER TaskName
        Provide custom name for the Scheduled Task

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Module
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Install-DbaWatchUpdate

    .EXAMPLE
        PS C:\> Install-DbaWatchUpdate

        Adds the scheduled task needed by Watch-DbaUpdate

    .EXAMPLE
        PS C:\> Install-DbaWatchUpdate -TaskName MyScheduledTask

        Will create the scheduled task as the name MyScheduledTask

    #>
    [cmdletbinding(SupportsShouldProcess)]
    param(
        [string]$TaskName = 'dbatools version check',
        [switch]$EnableException
    )
    process {
        if ($PSCmdlet.ShouldProcess($env:COMPUTERNAME, "Validate Version of OS") ) {
            if (([Environment]::OSVersion).Version.Major -lt 10) {
                Stop-Function -Message "This command only supports Windows 10 and above"
            }
        }
        $script = {
            try {
                # create a task, check every 3 hours
                $action = New-ScheduledTaskAction -Execute 'powershell.exe' -Argument '-NoProfile -NoLogo -NonInteractive -WindowStyle Hidden Watch-DbaUpdate'
                $trigger = New-ScheduledTaskTrigger -Once -At (Get-Date).Date -RepetitionInterval (New-TimeSpan -Hours 1)
                $principal = New-ScheduledTaskPrincipal -LogonType S4U -UserId (whoami)
                $settings = New-ScheduledTaskSettingsSet -ExecutionTimeLimit ([timespan]::Zero) -AllowStartIfOnBatteries -DontStopIfGoingOnBatteries -StartWhenAvailable -RunOnlyIfNetworkAvailable -DontStopOnIdleEnd
                #Variable $Task marked as unused by PSScriptAnalyzer replaced with $null for catching output
                $null = Register-ScheduledTask -Principal $principal -TaskName 'dbatools version check' -Action $action -Trigger $trigger -Settings $settings -ErrorAction Stop
            } catch {
                # keep moving
                # here to avoid an empty catch
                $null = 1
            }
        }

        if ($null -eq (Get-ScheduledTask -TaskName $TaskName -ErrorAction SilentlyContinue)) {
            # Needs admin creds to setup the kind of PowerShell window that doesn't appear for a millisecond
            # which is a millisecond too long
            if ($PSCmdlet.ShouldProcess($env:COMPUTERNAME, "Validate running in RunAs mode")) {
                if (-not ([Security.Principal.WindowsPrincipal][Security.Principal.WindowsIdentity]::GetCurrent()).IsInRole([Security.Principal.WindowsBuiltInRole] "Administrator")) {
                    Write-Message -Level Warning -Message "This command has to run using RunAs mode (privileged) to create the Scheduled Task. This will only happen once."
                    if ($PSCmdlet.ShouldProcess($env:COMPUTERNAME, "Starting process in RunAs mode") ) {
                        Start-Process powershell -Verb runAs -ArgumentList Install-DbaWatchUpdate -Wait
                    }
                }

            }
            if ($PSCmdlet.ShouldProcess($env:COMPUTERNAME, "Creating scheduled task $TaskName")) {
                try {
                    Invoke-Command -ScriptBlock $script -ErrorAction Stop

                    if ((Get-Location).Path -ne "$env:WINDIR\system32") {
                        Write-Message -Level Output -Message "Scheduled Task [$TaskName] created! A notification should appear momentarily. Here's something cute to look at in the interim."
                        Show-Notification -Title "dbatools wants you" -Text "come hang out at dbatools.io/slack"
                    }
                } catch {
                    Stop-Function -Message "Could not create scheduled task $TaskName" -Target $env:COMPUTERNAME -ErrorRecord $_
                }
            }
            if ($PSCmdlet.ShouldProcess($env:COMPUTERNAME, "Checking scheduled task was created")) {
                # double check
                if ($null -eq (Get-ScheduledTask -TaskName "dbatools version check" -ErrorAction SilentlyContinue)) {
                    Write-Message -Level Warning -Message "Scheduled Task was not created."
                }
            }
        } else {
            Write-Message -Level Output -Message "Scheduled Task $TaskName is already installed on this machine."
        }
    }
}

tools\dbatools\functions\Install-DbaWhoIsActive.ps1

function Install-DbaWhoIsActive {
    <#
    .SYNOPSIS
        Automatically installs or updates sp_WhoisActive by Adam Machanic.

    .DESCRIPTION
        This command downloads, extracts and installs sp_WhoisActive with Adam's permission. To read more about sp_WhoisActive, please visit http://whoisactive.com and http://sqlblog.com/blogs/adam_machanic/archive/tags/who+is+active/default.aspx

        Please consider donating to Adam if you find this stored procedure helpful: http://tinyurl.com/WhoIsActiveDonate

        Note that you will be prompted a bunch of times to confirm an action.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. Server version must be SQL Server version 2005 or higher.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The database to install sp_WhoisActive into. This parameter is mandatory when executing this command unattended.

    .PARAMETER LocalFile
        Specifies the path to a local file to install sp_WhoisActive from. This can be either the zipfile as distributed by the website or the expanded SQL script. If this parameter is not specified, the latest version will be downloaded and installed from https://whoisactive.com/

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER Force
        If this switch is enabled, the sp_WhoisActive will be downloaded from the internet even if previously cached.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: AdamMechanic, WhoIsActive, SpWhoIsActive
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Install-DbaWhoIsActive

    .EXAMPLE
        PS C:\> Install-DbaWhoIsActive -SqlInstance sqlserver2014a -Database master

        Downloads sp_WhoisActive from the internet and installs to sqlserver2014a's master database. Connects to SQL Server using Windows Authentication.

    .EXAMPLE
        PS C:\> Install-DbaWhoIsActive -SqlInstance sqlserver2014a -SqlCredential $cred

        Pops up a dialog box asking which database on sqlserver2014a you want to install the procedure into. Connects to SQL Server using SQL Authentication.

    .EXAMPLE
        PS C:\> Install-DbaWhoIsActive -SqlInstance sqlserver2014a -Database master -LocalFile c:\SQLAdmin\whoisactive_install.sql

        Installs sp_WhoisActive to sqlserver2014a's master database from the local file whoisactive_install.sql

    .EXAMPLE
        PS C:\> $instances = Get-DbaCmsRegServer sqlserver
        PS C:\> Install-DbaWhoIsActive -SqlInstance $instances -Database master

        Installs sp_WhoisActive to all servers within CMS
    #>

    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "Low")]
    param (
        [parameter(Mandatory, ValueFromPipeline, Position = 0)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PsCredential]$SqlCredential,
        [ValidateScript( { Test-Path -Path $_ -PathType Leaf })]
        [string]$LocalFile,
        [object]$Database,
        [switch][Alias('Silent')]
        $EnableException,
        [switch]$Force
    )

    begin {
        $DbatoolsData = Get-DbatoolsConfigValue -FullName "Path.DbatoolsData"
        $temp = ([System.IO.Path]::GetTempPath()).TrimEnd("\")
        $zipfile = "$temp\spwhoisactive.zip"

        if ($LocalFile -eq $null -or $LocalFile.Length -eq 0) {
            $baseUrl = "http://whoisactive.com/downloads"
            $latest = ((Invoke-TlsWebRequest -UseBasicParsing -uri http://whoisactive.com/downloads).Links | where-object { $PSItem.href -match "who_is_active" } | Select-Object href -First 1).href
            $LocalCachedCopy = Join-Path -Path $DbatoolsData -ChildPath $latest;

            if ((Test-Path -Path $LocalCachedCopy -PathType Leaf) -and (-not $Force)) {
                Write-Message -Level Verbose -Message "Locally-cached copy exists, skipping download."
                if ($PSCmdlet.ShouldProcess($env:computername, "Copying sp_WhoisActive from local cache for installation")) {
                    Copy-Item -Path $LocalCachedCopy -Destination $zipfile;
                }
            } else {
                if ($PSCmdlet.ShouldProcess($env:computername, "Downloading sp_WhoisActive")) {
                    try {
                        Write-Message -Level Verbose -Message "Downloading sp_WhoisActive zip file, unzipping and installing."
                        $url = $baseUrl + "/" + $latest
                        try {
                            Invoke-TlsWebRequest $url -OutFile $zipfile -ErrorAction Stop -UseBasicParsing
                            Copy-Item -Path $zipfile -Destination $LocalCachedCopy
                        } catch {
                            #try with default proxy and usersettings
                            (New-Object System.Net.WebClient).Proxy.Credentials = [System.Net.CredentialCache]::DefaultNetworkCredentials
                            Invoke-TlsWebRequest $url -OutFile $zipfile -ErrorAction Stop -UseBasicParsing
                        }
                    } catch {
                        Stop-Function -Message "Couldn't download sp_WhoisActive. Please download and install manually from $url." -ErrorRecord $_
                        return
                    }
                }
            }
        } else {
            # Look local
            if ($PSCmdlet.ShouldProcess($env:computername, "Copying local file to temp directory")) {

                if ($LocalFile.EndsWith("zip")) {
                    Copy-Item -Path $LocalFile -Destination $zipfile -Force
                } else {
                    Copy-Item -Path $LocalFile -Destination (Join-Path -path $temp -childpath "whoisactivelocal.sql")
                }
            }
        }
        if ($LocalFile -eq $null -or $LocalFile.Length -eq 0 -or $LocalFile.EndsWith("zip")) {
            # Unpack
            # Unblock if there's a block
            if ($PSCmdlet.ShouldProcess($env:computername, "Unpacking zipfile")) {

                Unblock-File $zipfile -ErrorAction SilentlyContinue

                if (Get-Command -ErrorAction SilentlyContinue -Name "Expand-Archive") {
                    try {
                        Expand-Archive -Path $zipfile -DestinationPath $temp -Force
                    } catch {
                        Stop-Function -Message "Unable to extract $zipfile. Archive may not be valid." -ErrorRecord $_
                        return
                    }
                } else {
                    # Keep it backwards compatible
                    $shell = New-Object -ComObject Shell.Application
                    $zipPackage = $shell.NameSpace($zipfile)
                    $destinationFolder = $shell.NameSpace($temp)
                    Get-ChildItem "$temp\who*active*.sql" | Remove-Item
                    $destinationFolder.CopyHere($zipPackage.Items())
                }
                Remove-Item -Path $zipfile
            }
            $sqlfile = (Get-ChildItem "$temp\who*active*.sql" -ErrorAction SilentlyContinue | Select-Object -First 1).FullName
        } else {
            $sqlfile = $LocalFile
        }

        if ($PSCmdlet.ShouldProcess($env:computername, "Reading SQL file into memory")) {
            Write-Message -Level Verbose -Message "Using $sqlfile."

            $sql = [IO.File]::ReadAllText($sqlfile)
            $sql = $sql -replace 'USE master', ''
            $batches = $sql -split "GO\r\n"

            $matchString = 'Who Is Active? v'

            If ($sql -like "*$matchString*") {
                $posStart = $sql.IndexOf("$matchString")
                $PosEnd = $sql.IndexOf(")", $PosStart)
                $versionWhoIsActive = $sql.Substring($posStart + $matchString.Length, $posEnd - ($posStart + $matchString.Length) + 1).TrimEnd()
            } Else {
                $versionWhoIsActive = ''
            }
        }
    }

    process {
        if (Test-FunctionInterrupt) { return }

        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            if (-not $Database) {
                if ($PSCmdlet.ShouldProcess($instance, "Prompting with GUI list of databases")) {
                    $Database = Show-DbaDbList -SqlInstance $server -Title "Install sp_WhoisActive" -Header "To deploy sp_WhoisActive, select a database or hit cancel to quit." -DefaultDb "master"

                    if (-not $Database) {
                        Stop-Function -Message "You must select a database to install the procedure." -Target $Database
                        return
                    }

                    if ($Database -ne 'master') {
                        Write-Message -Level Warning -Message "You have selected a database other than master. When you run Invoke-DbaWhoIsActive in the future, you must specify -Database $Database."
                    }
                }
            }
            if ($PSCmdlet.ShouldProcess($instance, "Installing sp_WhoisActive")) {
                try {
                    $ProcedureExists_Query = "select COUNT(*) [proc_count] from sys.procedures where is_ms_shipped = 0 and name like '%sp_WhoisActive%'"

                    if ($server.Databases[$Database]) {
                        $ProcedureExists = ($server.Query($ProcedureExists_Query, $Database)).proc_count
                        foreach ($batch in $batches) {
                            try {
                                $null = $server.databases[$Database].ExecuteNonQuery($batch)
                            } catch {
                                Stop-Function -Message "Failed to install stored procedure." -ErrorRecord $_ -Continue -Target $instance
                            }
                        }

                        if ($ProcedureExists -gt 0) {
                            $status = 'Updated'
                        } else {
                            $status = 'Installed'
                        }


                        [PSCustomObject]@{
                            ComputerName = $server.ComputerName
                            InstanceName = $server.ServiceName
                            SqlInstance  = $server.DomainInstanceName
                            Database     = $Database
                            Name         = 'sp_WhoisActive'
                            Version      = $versionWhoIsActive
                            Status       = $status
                        }
                    } else {
                        Stop-Function -Message "Failed to find database $Database on $instance or $Database is not writeable." -ErrorRecord $_ -Continue -Target $instance
                    }

                } catch {
                    Stop-Function -Message "Failed to install stored procedure." -ErrorRecord $_ -Continue -Target $instance
                }

            }
        }
    }
    end {
        if ($PSCmdlet.ShouldProcess($env:computername, "Post-install cleanup")) {
            Get-Item $sqlfile | Remove-Item
        }
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Install-SqlWhoIsActive
    }
}

tools\dbatools\functions\Get-DbaWsfcCluster.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaWsfcCluster {
    <#
    .SYNOPSIS
        Gets information about one or more failover clusters in a given domain.

    .DESCRIPTION
        Gets information about one or more failover clusters in a given domain.

        All Windows Server Failover Clustering (Wsfc) commands require local admin on each member node.

    .PARAMETER ComputerName
        The target cluster name. Can be a node or the cluster name itself.

    .PARAMETER Credential
        Allows you to login to the cluster using alternative credentials.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Cluster, WSFC, FCI, HA
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaWsfcCluster

    .EXAMPLE
        PS C:\> Get-DbaWsfcCluster -ComputerName cluster01

        Gets failover cluster information about cluster01

    .EXAMPLE
        PS C:\> Get-DbaWsfcCluster -ComputerName cluster01 | Select *

        Shows all cluster values, including the ones not shown in the default view

    #>
    [CmdletBinding()]
    param (
        [parameter(ValueFromPipeline)]
        [DbaInstanceParameter[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [switch]$EnableException
    )
    process {
        foreach ($computer in $computername) {
            $cluster = Get-DbaCmObject -Computername $computer -Credential $Credential -Namespace root\MSCluster -ClassName MSCluster_Cluster
            $cluster | Add-Member -Force -NotePropertyName State -NotePropertyValue (Get-ResourceState $resource.State)
            $cluster | Select-DefaultView -Property Name, Fqdn, State, DrainOnShutdown, DynamicQuorumEnabled, EnableSharedVolumes, SharedVolumesRoot, QuorumPath, QuorumType, QuorumTypeValue, RequestReplyTimeout
        }
    }
}

tools\dbatools\functions\Get-DbaWsfcDisk.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaWsfcDisk {
    <#
    .SYNOPSIS
        Gets information about the clustered disks on one or more failover clusters in a given domain.

    .DESCRIPTION
        Gets information about the clustered disks on one or more failover clusters in a given domain.

        All Windows Server Failover Clustering (Wsfc) commands require local admin on each member node.

    .PARAMETER ComputerName
        The target cluster name. Can be a node or the cluster name itself.

    .PARAMETER Credential
        Allows you to login to the cluster using alternative credentials.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Cluster, WSFC, FCI, HA
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaWsfcDisk

    .EXAMPLE
        PS C:\> Get-DbaWsfcDisk -ComputerName cluster01

        Gets disk information from the failover cluster cluster01

    #>
    [CmdletBinding()]
    param (
        [parameter(ValueFromPipeline)]
        [DbaInstanceParameter[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [switch]$EnableException
    )
    process {
        foreach ($computer in $computername) {
            $resources = Get-DbaWsfcResource -ComputerName $computer -Credential $Credential | Where-Object Type -eq 'Physical Disk'
            foreach ($resource in $resources) {
                $disks = $resource | Get-CimAssociatedInstance -ResultClassName MSCluster_Disk
                foreach ($disk in $disks) {
                    $diskpart = $disk | Get-CimAssociatedInstance -ResultClassName MSCluster_DiskPartition
                    [pscustomobject]@{
                        ClusterName     = $resource.ClusterName
                        ClusterFqdn     = $resource.ClusterFqdn
                        ResourceGroup   = $resource.OwnerGroup
                        Disk            = $resource.Name
                        State           = $resource.State
                        FileSystem      = $diskpart.FileSystem
                        Path            = $diskpart.Path
                        Label           = $diskpart.VolumeLabel
                        Size            = [dbasize]($diskpart.TotalSize * 1MB)
                        Free            = [dbasize]($diskpart.FreeSpace * 1MB)
                        MountPoints     = $diskpart.MountPoints
                        SerialNumber    = $diskpart.SerialNumber
                        ClusterDisk     = $disk
                        ClusterDiskPart = $diskpart
                        ClusterResource = $resource
                    } | Select-DefaultView -ExcludeProperty ClusterDisk, ClusterDiskPart, ClusterResource
                }
            }
        }
    }
}

tools\dbatools\functions\Get-DbaWsfcNetwork.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaWsfcNetwork {
    <#
    .SYNOPSIS
        Gets information about one or more networks in a failover cluster.

    .DESCRIPTION
        Gets information about one or more networks in a failover cluster.

        All Windows Server Failover Clustering (Wsfc) commands require local admin on each member node.

    .PARAMETER ComputerName
        The target cluster name. Can be a Network or the cluster name itself.

    .PARAMETER Credential
        Allows you to login to the cluster using alternative credentials.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Cluster, WSFC, FCI, HA
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaWsfcNetwork

    .EXAMPLE
        PS C:\> Get-DbaWsfcNetwork -ComputerName cluster01

        Gets network information from the failover cluster cluster01

    #>
    [CmdletBinding()]
    param (
        [parameter(ValueFromPipeline)]
        [DbaInstanceParameter[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [switch]$EnableException
    )
    process {
        foreach ($computer in $computername) {
            $cluster = Get-DbaWsfcCluster -ComputerName $computer -Credential $Credential

            $network = Get-DbaCmObject -Computername $computer -Credential $Credential -Namespace root\MSCluster -ClassName MSCluster_Network
            $network | Add-Member -Force -NotePropertyName ClusterName -NotePropertyValue $cluster.Name
            $network | Add-Member -Force -NotePropertyName ClusterFqdn -NotePropertyValue $cluster.Fqdn

            $network | Select-DefaultView -Property ClusterName, ClusterFqdn, Name, Address, AddressMask, IPv4Addresses, IPv4PrefixLengths, IPv6Addresses, IPv6PrefixLengths, QuorumType, QuorumTypeValue, RequestReplyTimeout, Role
        }
    }
}

tools\dbatools\functions\Get-DbaWsfcNetworkInterface.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaWsfcNetworkInterface {
    <#
    .SYNOPSIS
        Gets information about one or more network adapters in a failover cluster.

    .DESCRIPTION
        Gets information about one or more network adapters in a failover cluster.

        All Windows Server Failover Clustering (Wsfc) commands require local admin on each member node.

    .PARAMETER ComputerName
        The target cluster name. Can be a Network or the cluster name itself.

    .PARAMETER Credential
        Allows you to login to the cluster using alternative credentials.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Cluster, WSFC, FCI, HA
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaWsfcNetworkInterface

    .EXAMPLE
        PS C:\> Get-DbaWsfcNetworkInterface -ComputerName cluster01

        Gets network interface information from the failover cluster cluster01

    .EXAMPLE
        PS C:\> Get-DbaWsfcNetworkInterface -ComputerName cluster01 | Select *

        Shows all network interface  values, including the ones not shown in the default view

    #>
    [CmdletBinding()]
    param (
        [parameter(ValueFromPipeline)]
        [DbaInstanceParameter[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [switch]$EnableException
    )
    process {
        foreach ($computer in $computername) {
            $cluster = Get-DbaWsfcCluster -ComputerName $computer -Credential $Credential
            $network = Get-DbaCmObject -Computername $computer -Credential $Credential -Namespace root\MSCluster -ClassName MSCluster_NetworkInterface
            $network | Add-Member -Force -NotePropertyName ClusterName -NotePropertyValue $cluster.Name
            $network | Add-Member -Force -NotePropertyName ClusterFqdn -NotePropertyValue $cluster.Fqdn
            $network | Select-DefaultView -Property ClusterName, ClusterFqdn, Name, Network, Node, Adapter, Address, DhcpEnabled, IPv4Addresses, IPv6Addresses, IPv6Addresses
        }
    }
}

tools\dbatools\functions\Get-DbaWsfcNode.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaWsfcNode {
    <#
    .SYNOPSIS
        Gets information about one or more nodes, or servers, in a failover cluster.

    .DESCRIPTION
        Gets information about one or more nodes, or servers, in a failover cluster.

        All Windows Server Failover Clustering (Wsfc) commands require local admin on each member node.

    .PARAMETER ComputerName
        The target cluster name. Can be a node or the cluster name itself.

    .PARAMETER Credential
        Allows you to login to the cluster using alternative credentials.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Cluster, WSFC, FCI, HA
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaWsfcNode

    .EXAMPLE
        PS C:\> Get-DbaWsfcNode -ComputerName cluster01

        Gets node information from the failover cluster cluster01

    .EXAMPLE
        PS C:\> Get-DbaWsfcNode -ComputerName cluster01 | Select-Object *

        Shows all node values, including the ones not shown in the default view

    #>
    [CmdletBinding()]
    param (
        [parameter(ValueFromPipeline)]
        [DbaInstanceParameter[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [switch]$EnableException
    )
    process {
        foreach ($computer in $computername) {
            $cluster = Get-DbaWsfcCluster -ComputerName $computer -Credential $Credential
            $node = Get-DbaCmObject -Computername $computer -Credential $Credential -Namespace root\MSCluster -ClassName MSCluster_Node
            $node | Add-Member -Force -NotePropertyName ClusterName -NotePropertyValue $cluster.Name
            $node | Add-Member -Force -NotePropertyName ClusterFqdn -NotePropertyValue $cluster.Fqdn
            $node | Select-DefaultView -Property ClusterName, ClusterFqdn, Name, PrimaryOwnerName, PrimaryOwnerContact, Dedicated, NodeHighestVersion, NodeLowestVersion
        }
    }
}

tools\dbatools\functions\Get-DbaWsfcResource.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaWsfcResource {
    <#
    .SYNOPSIS
        Gets information about one or more resources in a failover cluster.

    .DESCRIPTION
        Gets information about one or more resources in a failover cluster.

        All Windows Server Failover Clustering (Wsfc) commands require local admin on each member node.

    .PARAMETER ComputerName
        The target cluster name. Can be a node or the cluster name itself.

    .PARAMETER Credential
        Allows you to login to the cluster using alternative credentials.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Cluster, WSFC, FCI, HA
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaWsfcResource

    .EXAMPLE
        PS C:\> Get-DbaWsfcResource -ComputerName cluster01

        Gets resource information from the failover cluster cluster01

    .EXAMPLE
        PS C:\> Get-DbaWsfcResource -ComputerName cluster01 | Select *

        Shows all resource values, including the ones not shown in the default view

    #>
    [CmdletBinding()]
    param (
        [parameter(ValueFromPipeline)]
        [DbaInstanceParameter[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [switch]$EnableException
    )
    process {
        foreach ($computer in $computername) {
            $cluster = Get-DbaWsfcCluster -ComputerName $computer -Credential $Credential
            $resources = Get-DbaCmObject -Computername $computer -Credential $Credential -Namespace root\MSCluster -ClassName MSCluster_Resource
            foreach ($resource in $resources) {
                $resource | Add-Member -Force -NotePropertyName State -NotePropertyValue (Get-ResourceState $resource.State)
                $resource | Add-Member -Force -NotePropertyName ClusterName -NotePropertyValue $cluster.Name
                $resource | Add-Member -Force -NotePropertyName ClusterFqdn -NotePropertyValue $cluster.Fqdn
                $resource | Select-DefaultView -Property ClusterName, ClusterFqdn, Name, State, Type, OwnerGroup, OwnerNode, PendingTimeout, PersistentState, QuorumCapable, RequiredDependencyClasses, RequiredDependencyTypes, RestartAction, RestartDelay, RestartPeriod, RestartThreshold, RetryPeriodOnFailure, SeparateMonitor
            }
        }
    }
}

tools\dbatools\functions\Get-DbaWsfcResourceType.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaWsfcResourceType {
    <#
    .SYNOPSIS
        Gets information about one or more resource types in a failover cluster.

    .DESCRIPTION
        Gets information about one or more resource types in a failover cluster.

        All Windows Server Failover Clustering (Wsfc) commands require local admin on each member node.

    .PARAMETER ComputerName
        The target cluster name. Can be a node or the cluster name itself.

    .PARAMETER Credential
        Allows you to login to the cluster using alternative credentials.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Cluster, WSFC, FCI, HA
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaWsfcResourceType

    .EXAMPLE
        PS C:\> Get-DbaWsfcResourceType -ComputerName cluster01

        Gets resource type information from the failover cluster cluster01

    #>
    [CmdletBinding()]
    param (
        [parameter(ValueFromPipeline)]
        [DbaInstanceParameter[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [switch]$EnableException
    )
    process {
        foreach ($computer in $computername) {
            $cluster = Get-DbaWsfcCluster -ComputerName $computer -Credential $Credential
            $resource = Get-DbaCmObject -Computername $computer -Credential $Credential -Namespace root\MSCluster -ClassName MSCluster_ResourceType
            $resource | Add-Member -Force -NotePropertyName ClusterName -NotePropertyValue $cluster.Name
            $resource | Add-Member -Force -NotePropertyName ClusterFqdn -NotePropertyValue $cluster.Fqdn
            $resource | Select-DefaultView -Property ClusterName, ClusterFqdn, Name, DisplayName, DllName, RequiredDependencyTypes
        }
    }
}

tools\dbatools\functions\Get-DbaWsfcSharedVolume.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaWsfcSharedVolume {
    <#
    .SYNOPSIS
        Gets information about Cluster Shared Volumes in a failover cluster.

    .DESCRIPTION
        Gets information about Cluster Shared Volumes in a failover cluster.

        All Windows Server Failover Clustering (Wsfc) commands require local admin on each member node.

    .PARAMETER ComputerName
        The target cluster name. Can be a node or the cluster name itself.

    .PARAMETER Credential
        Allows you to login to the cluster using alternative credentials.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Cluster, WSFC, FCI, HA
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaWsfcSharedVolume

    .EXAMPLE
        PS C:\> Get-DbaWsfcSharedVolume -ComputerName cluster01

        Gets shared volume (CSV) information from the failover cluster cluster01

    #>
    [CmdletBinding()]
    param (
        [parameter(ValueFromPipeline)]
        [DbaInstanceParameter[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [switch]$EnableException
    )
    process {
        foreach ($computer in $computername) {
            $cluster = Get-DbaWsfcCluster -ComputerName $computer -Credential $Credential
            $volume = Get-DbaCmObject -Computername $computer -Credential $Credential -Namespace root\MSCluster -ClassName ClusterSharedVolume
            # I don't have a shared volume, so I can't see how to clean this up: Passthru
            $volume | Add-Member -Force -NotePropertyName ClusterName -NotePropertyValue $cluster.Name
            $volume | Add-Member -Force -NotePropertyName ClusterFqdn -NotePropertyValue $cluster.Fqdn
            $volume | Add-Member -Force -NotePropertyName State -NotePropertyValue (Get-ResourceState $resource.State) -PassThru
        }
    }
}

tools\dbatools\functions\Get-DbaXEObject.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaXEObject {
    <#
    .SYNOPSIS
        Gets a list of extended events objects exposed by event packages from specified SQL Server instance(s).

    .DESCRIPTION
        This function returns a list of extended events objects exposed by event packages from specified SQL Server instance(s).

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2008 or higher.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Type
        Used to specify the type. Valid types include:

        Action
        Event
        Map
        Message
        PredicateComparator
        PredicateSource
        Target
        Type

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message. This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting. Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: ExtendedEvent, XE, XEvent
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Get-DbaXEObject -SqlInstance sql2016

        Lists all the XE Objects on the sql2016 SQL Server.

    .EXAMPLE
        PS C:\> Get-DbaXEObject -SqlInstance sql2017 -Type Action, Event

        Lists all the XE Objects of type Action and Event on the sql2017 SQL Server.

    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [ValidateSet("Type", "Event", "Target", "Action", "Map", "Message", "PredicateComparator", "PredicateSource")]
        [string[]]$Type,
        [switch]$EnableException
    )
    begin {
        if ($Type) {
            $join = $Type -join "','"
            $where = "AND o.object_type in ('$join')"
            $where.Replace("PredicateComparator", "pred_compare")
            $where.Replace("PredicateSource", "pred_source")
        }
        $sql = "SELECT  SERVERPROPERTY('MachineName') AS ComputerName,
                ISNULL(SERVERPROPERTY('InstanceName'), 'MSSQLSERVER') AS InstanceName,
                SERVERPROPERTY('ServerName') AS SqlInstance,
                p.name AS PackageName,
                ObjectType =
                      CASE o.object_type
                         WHEN 'type' THEN 'Type'
                         WHEN 'event' THEN 'Event'
                         WHEN 'target' THEN 'Target'
                         WHEN 'pred_compare' THEN 'PredicateComparator'
                         WHEN 'pred_source' THEN 'PredicateSource'
                         WHEN 'action' THEN 'Action'
                         WHEN 'map' THEN 'Map'
                         WHEN 'message' THEN 'Message'
                         ELSE o.object_type
                      END,
                o.object_type as ObjectTypeRaw,
                o.name AS TargetName,
                o.description as Description
                FROM sys.dm_xe_packages AS p
                JOIN sys.dm_xe_objects AS o ON p.guid = o.package_guid
                WHERE (p.capabilities IS NULL OR p.capabilities & 1 = 0)
                $where
                AND (o.capabilities IS NULL OR o.capabilities & 1 = 0)
                ORDER BY o.object_type
                "
    }
    process {
        foreach ($instance in $SqlInstance) {

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
                return
            }

            try {
                $server.Query($sql) | Select-DefaultView -ExcludeProperty ComputerName, InstanceName, ObjectTypeRaw
            } catch {
                Stop-Function -Message "Issue collecting trace data on $server." -Target $server -ErrorRecord $_
            }
        }
    }
}

tools\dbatools\functions\Get-DbaXESession.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaXESession {
    <#
    .SYNOPSIS
        Gets a list of Extended Events Sessions from the specified SQL Server instance(s).

    .DESCRIPTION
        Retrieves a list of Extended Events Sessions present on the specified SQL Server instance(s).

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2008 or higher.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Session
        Only return specific sessions. Options for this parameter are auto-populated from the server.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: ExtendedEvent, XE, XEvent
        Author: Klaas Vandenberghe (@PowerDBAKlaas)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaXESession

    .EXAMPLE
        PS C:\> Get-DbaXESession -SqlInstance ServerA\sql987

        Returns a custom object with ComputerName, SQLInstance, Session, StartTime, Status and other properties.

    .EXAMPLE
        PS C:\> Get-DbaXESession -SqlInstance ServerA\sql987 | Format-Table ComputerName, SqlInstance, Session, Status -AutoSize

        Returns a formatted table displaying ComputerName, SqlInstance, Session, and Status.

    .EXAMPLE
        PS C:\> 'ServerA\sql987','ServerB' | Get-DbaXESession

        Returns a custom object with ComputerName, SqlInstance, Session, StartTime, Status and other properties, from multiple SQL instances.

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias("Sessions")]
        [object[]]$Session,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Get-DbaXEsSession
    }

    process {

        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 11 -AzureUnsupported
                $SqlConn = $server.ConnectionContext.SqlConnectionObject
                $SqlStoreConnection = New-Object Microsoft.SqlServer.Management.Sdk.Sfc.SqlStoreConnection $SqlConn
                $XEStore = New-Object  Microsoft.SqlServer.Management.XEvent.XEStore $SqlStoreConnection
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            Write-Message -Level Verbose -Message "Getting XEvents Sessions on $instance."
            $xesessions = $XEStore.sessions

            if ($Session) {
                $xesessions = $xesessions | Where-Object { $_.Name -in $Session }
            }

            foreach ($x in $xesessions) {
                $status = switch ($x.IsRunning) { $true { "Running" } $false { "Stopped" } }
                $files = $x.Targets.TargetFields | Where-Object Name -eq Filename | Select-Object -ExpandProperty Value

                $filecollection = $remotefile = @()

                if ($files) {
                    foreach ($file in $files) {
                        if ($file -notmatch ':\\' -and $file -notmatch '\\\\') {
                            $directory = $server.ErrorLogPath.TrimEnd("\")
                            $file = "$directory\$file"
                        }
                        $filecollection += $file
                        $remotefile += Join-AdminUnc -servername $server.ComputerName -filepath $file
                    }
                }

                Add-Member -Force -InputObject $x -MemberType NoteProperty -Name ComputerName -Value $server.ComputerName
                Add-Member -Force -InputObject $x -MemberType NoteProperty -Name InstanceName -Value $server.ServiceName
                Add-Member -Force -InputObject $x -MemberType NoteProperty -Name SqlInstance -Value $server.DomainInstanceName
                Add-Member -Force -InputObject $x -MemberType NoteProperty -Name Status -Value $status
                Add-Member -Force -InputObject $x -MemberType NoteProperty -Name Session -Value $x.Name
                Add-Member -Force -InputObject $x -MemberType NoteProperty -Name TargetFile -Value $filecollection
                Add-Member -Force -InputObject $x -MemberType NoteProperty -Name RemoteTargetFile -Value $remotefile
                Add-Member -Force -InputObject $x -MemberType NoteProperty -Name Parent -Value $server
                Add-Member -Force -InputObject $x -MemberType NoteProperty -Name Store -Value $XEStore
                Select-DefaultView -InputObject $x -Property ComputerName, InstanceName, SqlInstance, Name, Status, StartTime, AutoStart, State, Targets, TargetFile, Events, MaxMemory, MaxEventSize
            }
        }
    }
}

tools\dbatools\functions\Get-DbaXESessionTarget.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaXESessionTarget {
    <#
    .SYNOPSIS
        Get a list of Extended Events Session Targets from the specified SQL Server instance(s).

    .DESCRIPTION
        Retrieves a list of Extended Events Session Targets from the specified SQL Server instance(s).

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2008 or higher.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Session
        Only return a specific session. Options for this parameter are auto-populated from the server.

    .PARAMETER Target
        Only return a specific target.

    .PARAMETER InputObject
        Specifies an XE session returned by Get-DbaXESession to search.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: ExtendedEvent, XE, XEvent
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaXESessionTarget

    .EXAMPLE
        PS C:\> Get-DbaXESessionTarget -SqlInstance ServerA\sql987 -Session system_health

        Shows targets for the system_health session on ServerA\sql987.

    .EXAMPLE
        PS C:\> Get-DbaXESession -SqlInstance sql2016 -Session system_health | Get-DbaXESessionTarget

        Returns the targets for the system_health session on sql2016.

    .EXAMPLE
        PS C:\> Get-DbaXESession -SqlInstance sql2016 -Session system_health | Get-DbaXESessionTarget -Target package0.event_file

        Return only the package0.event_file target for the system_health session on sql2016.

    #>
    [CmdletBinding(DefaultParameterSetName = "Default")]
    param (
        [parameter(ValueFromPipeline, ParameterSetName = "instance", Mandatory)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$Session,
        [string[]]$Target,
        [parameter(ValueFromPipeline, ParameterSetName = "piped", Mandatory)]
        [Microsoft.SqlServer.Management.XEvent.Session[]]$InputObject,
        [switch][Alias('Silent')]
        $EnableException
    )

    begin {
        function Get-Target {
            [CmdletBinding()]
            param (
                $Sessions,
                $Session,
                $Server,
                $Target
            )

            foreach ($xsession in $Sessions) {

                if ($null -eq $server) {
                    $server = $xsession.Parent
                }

                if ($Session -and $xsession.Name -notin $Session) { continue }
                $status = switch ($xsession.IsRunning) { $true { "Running" } $false { "Stopped" } }
                $sessionname = $xsession.Name

                foreach ($xtarget in $xsession.Targets) {
                    if ($Target -and $xtarget.Name -notin $Target) { continue }

                    $files = $xtarget.TargetFields | Where-Object Name -eq Filename | Select-Object -ExpandProperty Value

                    $filecollection = $remotefile = @()

                    if ($files) {
                        foreach ($file in $files) {
                            if ($file -notmatch ':\\' -and $file -notmatch '\\\\') {
                                $directory = $server.ErrorLogPath.TrimEnd("\")
                                $file = "$directory\$file"
                            }
                            $filecollection += $file
                            $remotefile += Join-AdminUnc -servername $server.ComputerName -filepath $file
                        }
                    }

                    Add-Member -Force -InputObject $xtarget -MemberType NoteProperty -Name ComputerName -Value $server.ComputerName
                    Add-Member -Force -InputObject $xtarget -MemberType NoteProperty -Name InstanceName -Value $server.ServiceName
                    Add-Member -Force -InputObject $xtarget -MemberType NoteProperty -Name SqlInstance -Value $server.DomainInstanceName
                    Add-Member -Force -InputObject $xtarget -MemberType NoteProperty -Name Session -Value $sessionname
                    Add-Member -Force -InputObject $xtarget -MemberType NoteProperty -Name SessionStatus -Value $status
                    Add-Member -Force -InputObject $xtarget -MemberType NoteProperty -Name TargetFile -Value $filecollection
                    Add-Member -Force -InputObject $xtarget -MemberType NoteProperty -Name RemoteTargetFile -Value $remotefile

                    Select-DefaultView -InputObject $xtarget -Property ComputerName, InstanceName, SqlInstance, Session, SessionStatus, Name, ID, 'TargetFields as Field', PackageName, 'TargetFile as File', Description, ScriptName
                }
            }
        }
    }

    process {
        if (Test-FunctionInterrupt) { return }

        foreach ($instance in $SqlInstance) {
            $InputObject += Get-DbaXESession -SqlInstance $instance -SqlCredential $SqlCredential -Session $Session
        }
        Get-Target -Sessions $InputObject -Session $Session -Target $Target
    }
}

tools\dbatools\functions\Get-DbaXESessionTargetFile.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaXESessionTargetFile {
    <#
    .SYNOPSIS
        Get a file system object from the Extended Events Session Target Files.

    .DESCRIPTION
        Get a file system object from the Extended Events Session Target Files.

        Note: this performs a Get-ChildItem on remote servers if the specified target SQL Server is remote.

    .PARAMETER SqlInstance
        The target SQL Server

    .PARAMETER SqlCredential
        Login to SQL instnace with alternative credentials

    .PARAMETER Session
        Only return files from a specific session. Options for this parameter are auto-populated from the server.

    .PARAMETER Target
        Only return files from a specific target.

    .PARAMETER InputObject
        Allows results from piping in Get-DbaXESessionTarget.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: ExtendedEvent, XE, XEvent
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaXESessionTargetFile

    .EXAMPLE
        PS C:\> Get-DbaXESessionTargetFile -SqlInstance sql2017 -Session 'Long Running Queries'

        Shows Target Files for the 'Long Running Queries' session on sql2017.

    .EXAMPLE
        PS C:\> Get-DbaXESession -SqlInstance sql2016 -Session 'Long Running Queries' | Get-DbaXESessionTarget | Get-DbaXESessionTargetFile

        Returns the Target Files for the system_health session on sql2016.

    #>
    [CmdletBinding(DefaultParameterSetName = "Default")]
    param (
        [parameter(ValueFromPipeline, ParameterSetName = "instance", Mandatory)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$Session,
        [string[]]$Target,
        [parameter(ValueFromPipeline, ParameterSetName = "piped", Mandatory)]
        [Microsoft.SqlServer.Management.XEvent.Target[]]$InputObject,
        [switch]$EnableException
    )

    process {
        if (Test-FunctionInterrupt) { return }

        foreach ($instance in $SqlInstance) {
            $InputObject += Get-DbaXESessionTarget -SqlInstance $instance -SqlCredential $SqlCredential -Session $Session -Target $Target | Where-Object File -ne $null
        }

        foreach ($object in $InputObject) {
            $computer = [dbainstance]$object.ComputerName
            try {
                if ($computer.IsLocal) {
                    $file = $object.TargetFile
                    Write-Message -Level Verbose -Message "Getting $file"
                    Get-ChildItem "$file*" -ErrorAction Stop
                } else {
                    $file = $object.RemoteTargetFile
                    Write-Message -Level Verbose -Message "Getting $file"
                    Get-ChildItem -Recurse "$file*" -ErrorAction Stop
                }
            } catch {
                Stop-Function -Message "Failure" -ErrorRecord $_
            }
        }
    }
}

tools\dbatools\functions\Get-DbaXESessionTemplate.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaXESessionTemplate {
    <#
    .SYNOPSIS
        Parses Extended Event XML templates. Defaults to parsing templates in the dbatools template repository (\bin\xetemplates\).

    .DESCRIPTION
        Parses Extended Event XML templates. Defaults to parsing templates in the dbatools template repository (\bin\xetemplates\).

        The default repository contains templates from:
        Microsoft's Templates that come with SSMS
        Jes Borland's "Everyday Extended Events" presentation and GitHub repository (https://github.com/grrlgeek/extended-events)
        Christian Grafe (@ChrGraefe) XE Repo: https://github.com/chrgraefe/sqlscripts/blob/master/XE-Events/
        Erin Stellato's Blog: https://www.sqlskills.com/blogs/erin/

        Some profile templates converted using:
        sp_SQLskills_ConvertTraceToExtendedEvents.sql
        Jonathan M. Kehayias, SQLskills.com
        http://sqlskills.com/blogs/jonathan

    .PARAMETER Path
        The path to the template directory. Defaults to the dbatools template repository (\bin\xetemplates\).

    .PARAMETER Pattern
        Specify a pattern for filtering. Alternatively, you can use Out-GridView -Passthru to select objects and pipe them to Import-DbaXESessionTemplate

    .PARAMETER Template
        Specifies one or more of the templates provided by dbatools. Press tab to cycle through the list of options.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: ExtendedEvent, XE, XEvent
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaXESessionTemplate

    .EXAMPLE
        PS C:\> Get-DbaXESessionTemplate

        Returns information about all the templates in the local dbatools repository.

    .EXAMPLE
        PS C:\> Get-DbaXESessionTemplate | Out-GridView -PassThru | Import-DbaXESessionTemplate -SqlInstance sql2017 | Start-DbaXESession

        Allows you to select a Session template, then import it to the specified instance and start the session.

    .EXAMPLE
        PS C:\> Get-DbaXESessionTemplate -Path "$home\Documents\SQL Server Management Studio\Templates\XEventTemplates"

        Returns information about all the templates in your local XEventTemplates repository.

    .EXAMPLE
        PS C:\> Get-DbaXESessionTemplate -Pattern duration

        Returns information about all the templates that match the word "duration" in the title, category or body.

    .EXAMPLE
        PS C:\> Get-DbaXESessionTemplate | Select-Object *

        Returns more information about the template, including the full path/filename.

    #>

    [CmdletBinding()]
    param (
        [string[]]$Path = "$script:PSModuleRoot\bin\xetemplates",
        [string]$Pattern,
        [string[]]$Template,
        [switch]$EnableException
    )
    begin {
        $metadata = Import-Clixml "$script:PSModuleRoot\bin\xetemplates-metadata.xml"
        # In case people really want a "like" search, which is slower
        $Pattern = $Pattern.Replace("*", ".*").Replace("..*", ".*")
    }
    process {
        foreach ($directory in $Path) {
            $files = Get-ChildItem "$directory\*.xml"

            if ($Template) {
                $files = $files | Where-Object BaseName -in $Template
            }

            foreach ($file in $files) {
                try {
                    $xml = [xml](Get-Content $file)
                } catch {
                    Stop-Function -Message "Failure" -ErrorRecord $_ -Target $file -Continue
                }

                foreach ($session in $xml.event_sessions) {
                    $meta = $metadata | Where-Object Name -eq $session.event_session.name
                    if ($Pattern) {
                        if (
                            # There's probably a better way to do this
                            ($session.event_session.name -match $Pattern) -or
                            ($session.event_session.TemplateCategory.'#text' -match $Pattern) -or
                            ($session.event_session.TemplateSource -match $Pattern) -or
                            ($session.event_session.TemplateDescription.'#text' -match $Pattern) -or
                            ($session.event_session.TemplateName.'#text' -match $Pattern) -or
                            ($meta.Source -match $Pattern)
                        ) {
                            [pscustomobject]@{
                                Name          = $session.event_session.name
                                Category      = $session.event_session.TemplateCategory.'#text'
                                Source        = $meta.Source
                                Compatibility = ("$($meta.Compatibility)").ToString().Replace(",", "")
                                Description   = $session.event_session.TemplateDescription.'#text'
                                TemplateName  = $session.event_session.TemplateName.'#text'
                                Path          = $file
                                File          = $file.Name
                            } | Select-DefaultView -ExcludeProperty File, TemplateName, Path
                        }
                    } else {
                        [pscustomobject]@{
                            Name          = $session.event_session.name
                            Category      = $session.event_session.TemplateCategory.'#text'
                            Source        = $meta.Source
                            Compatibility = $meta.Compatibility.ToString().Replace(",", "")
                            Description   = $session.event_session.TemplateDescription.'#text'
                            TemplateName  = $session.event_session.TemplateName.'#text'
                            Path          = $file
                            File          = $file.Name
                        } | Select-DefaultView -ExcludeProperty File, TemplateName, Path
                    }
                }
            }
        }
    }
}

tools\dbatools\functions\Get-DbaServerRole.ps1

function Get-DbaServerRole {
    <#
    .SYNOPSIS
        Gets the list of server-level roles.

    .DESCRIPTION
        Gets the list of server-level roles for SQL Server instance.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. Server version must be SQL Server version 2005 or higher.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER ServerRole
        Server-Level role to filter results to that role only.

    .PARAMETER ExcludeServerRole
        Server-Level role to exclude from results.

    .PARAMETER ExcludeFixedRole
        Filter the fixed server-level roles. Only applies to SQL Server 2017 that supports creation of server-level roles.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message. This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting. Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: ServerRole, Security
        Author: Shawn Melton (@wsmelton)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaServerRole

    .EXAMPLE
        PS C:\> Get-DbaServerRole -SqlInstance sql2016a

        Outputs list of server-level roles for sql2016a instance.

    .EXAMPLE
        PS C:\> Get-DbaServerRole -SqlInstance sql2017a -ExcludeFixedRole

        Outputs the server-level role(s) that are not fixed roles on sql2017a instance.

    #>
    [CmdletBinding()]
    param (
        [Parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [DbaInstance[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$ServerRole,
        [string[]]$ExcludeServerRole,
        [switch]$ExcludeFixedRole,
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $serverroles = $server.Roles

            if ($ServerRole) {
                $serverroles = $serverroles | Where-Object Name -In $ServerRole
            }
            if ($ExcludeServerRole) {
                $serverroles = $serverroles | Where-Object Name -NotIn $ExcludeServerRole
            }
            if ($ExcludeFixedRole) {
                $serverroles = $serverroles | Where-Object IsFixedRole -eq $false
            }

            foreach ($role in $serverroles) {
                $members = $role.EnumMemberNames()

                Add-Member -Force -InputObject $role -MemberType NoteProperty -Name Login -Value $members
                Add-Member -Force -InputObject $role -MemberType NoteProperty -Name ComputerName -value $server.ComputerName
                Add-Member -Force -InputObject $role -MemberType NoteProperty -Name InstanceName -value $server.ServiceName
                Add-Member -Force -InputObject $role -MemberType NoteProperty -Name SqlInstance -value $server.DomainInstanceName

                $default = 'ComputerName', 'InstanceName', 'SqlInstance', 'Name as Role', 'IsFixedRole', 'DateCreated', 'DateModified'
                Select-DefaultView -InputObject $role -Property $default
            }
        }
    }
}

tools\dbatools\functions\Get-DbaServerRoleMember.ps1

function Get-DbaServerRoleMember {
    <#
    .SYNOPSIS
        Get members of server roles for each instance(s) of SQL Server.

    .DESCRIPTION
        The Get-DbaServerRoleMember returns connected SMO object for server roles for each instance(s) of SQL Server.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternate Windows or SQL Login Authentication. Accepts credential objects (Get-Credential).

    .PARAMETER ServerRole
        The role(s) to process. If unspecified, all roles will be processed.

    .PARAMETER ExcludeServerRole
        The role(s) to exclude.

    .PARAMETER Login
        The login(s) to process. If unspecified, all logins will be processed.

    .PARAMETER ExcludeFixedRole
        Filter the fixed server-level roles. Only applies to SQL Server 2017 that supports creation of server-level roles.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: ServerRole, Security, Login
        Author: Klaas Vandenberghe (@PowerDBAKlaas)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaServerRoleMember

    .EXAMPLE
        PS C:\> Get-DbaServerRoleMember -SqlInstance localhost

        Returns all members of all server roles on the local default SQL Server instance

    .EXAMPLE
        PS C:\> Get-DbaServerRoleMember -SqlInstance localhost, sql2016

        Returns all members of all server roles on the local and sql2016 SQL Server instances

    .EXAMPLE
        PS C:\> $servers = Get-Content C:\servers.txt
        PS C:\> $servers | Get-DbaServerRoleMember

        Returns all members of all server roles for every server in C:\servers.txt

    .EXAMPLE
        PS C:\> Get-DbaServerRoleMember -SqlInstance localhost -ServerRole 'sysadmin', 'dbcreator'

        Returns all members of the sysadmin or dbcreator roles on localhost.

    .EXAMPLE
        PS C:\> Get-DbaServerRoleMember -SqlInstance localhost -ExcludeServerRole 'sysadmin'

        Returns all members of server-level roles other than sysadmin.

    .EXAMPLE
        PS C:\> Get-DbaServerRoleMember -SqlInstance sql2017a -ExcludeFixedRole

        Returns all members of server-level role(s) that are not fixed roles on sql2017a instance.

    .EXAMPLE
        PS C:\> Get-DbaServerRoleMember -SqlInstance localhost -Login 'MyFriendlyDeveloper'

        Returns all server-level role(s) for the MyFriendlyDeveloper login on localhost.

    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias('ServerInstance', 'SqlServer')]
        [DbaInstance[]]$SqlInstance,
        [Alias('Credential')]
        [PSCredential]$SqlCredential,
        [string[]]$ServerRole,
        [string[]]$ExcludeServerRole,
        [object[]]$Login,
        [switch]$ExcludeFixedRole,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            Write-Message -Level Verbose -Message "Attempting to connect to $instance"

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message 'Failure' -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $roles = $server.Roles

            if (Test-Bound -ParameterName 'Login') {
                $logins = Get-DbaLogin -SqlInstance $instance -Login $Login
                Write-Message -Level 'Verbose' -Message "Filtering by logins: $($logins -join ', ')"

                foreach ($l in $logins) {
                    $loginRoles += $l.ListMembers()
                }

                $loginRoles = $loginRoles | Select-Object -Unique
                Write-Message -Level 'Verbose' -Message "Filtering by roles: $($loginRoles -join ', ')"

                $roles = $roles | Where-Object { $_.Name -in $loginRoles }
            }

            if (Test-Bound -ParameterName 'ServerRole') {
                $roles = $roles | Where-Object { $_.Name -in $ServerRole }
            }

            if (Test-Bound -ParameterName 'ExcludeServerRole') {
                $roles = $roles | Where-Object { $_.Name -notin $ExcludeServerRole }
            }

            if (Test-Bound -ParameterName 'ExcludeFixedRole') {
                $roles = $roles | Where-Object { $_.IsFixedRole -eq $false }
            }

            foreach ($role in $roles) {
                Write-Message -Level 'Verbose' -Message "Getting Server Role Members for $role on $instance"

                $members = $role.EnumMemberNames()
                Write-Message -Level 'Verbose' -Message "$role members: $($members -join ', ')"

                if (Test-Bound -ParameterName 'Login') {
                    Write-Message -Level 'Verbose' -Message "Only returning results for $($logins.Name -join ', ')"
                    $members = $members | Where-Object { $_ -in $logins.Name }
                }

                foreach ($member in $members) {
                    $l = $server.Logins | Where-Object { $_.Name -eq $member }

                    if ($l) {
                        Add-Member -Force -InputObject $l -MemberType NoteProperty -Name ComputerName -Value $server.ComputerName
                        Add-Member -Force -InputObject $l -MemberType NoteProperty -Name InstanceName -Value $server.ServiceName
                        Add-Member -Force -InputObject $l -MemberType NoteProperty -Name SqlInstance -Value $server.DomainInstanceName
                        Add-Member -Force -InputObject $l -MemberType NoteProperty -Name Role -Value $role.Name

                        # Select object because Select-DefaultView causes strange behaviors when assigned to a variable (??)
                        Select-Object -InputObject $l -Property 'ComputerName', 'InstanceName', 'SqlInstance', 'Role', 'Name'
                    }
                }
            }
        }
    }
}

tools\dbatools\functions\Get-DbaServerTrigger.ps1

function Get-DbaServerTrigger {
    <#
    .SYNOPSIS
        Get all existing server triggers on one or more SQL instances.

    .DESCRIPTION
        Get all existing server triggers on one or more SQL instances.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        SqlCredential object used to connect to the SQL Server as a different user.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Database, Trigger
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaServerTrigger

    .EXAMPLE
        PS C:\> Get-DbaServerTrigger -SqlInstance sql2017

        Returns all server triggers on sql2017

    #>
    [CmdletBinding()]
    param (
        [Parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [switch]$EnableException
    )

    process {
        foreach ($Instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            foreach ($trigger in $server.Triggers) {
                try {
                    Add-Member -Force -InputObject $trigger -MemberType NoteProperty -Name ComputerName -value $server.ComputerName
                    Add-Member -Force -InputObject $trigger -MemberType NoteProperty -Name InstanceName -value $server.ServiceName
                    Add-Member -Force -InputObject $trigger -MemberType NoteProperty -Name SqlInstance -value $server.DomainInstanceName
                    Select-DefaultView -InputObject $trigger -Property ComputerName, InstanceName, SqlInstance, ID, Name, AnsiNullsStatus, AssemblyName, BodyStartIndex, ClassName, CreateDate, DateLastModified, DdlTriggerEvents, ExecutionContext, ExecutionContextLogin, ImplementationType, IsDesignMode, IsEnabled, IsEncrypted, IsSystemObject, MethodName, QuotedIdentifierStatus, State, TextHeader, TextMode
                } catch {
                    Stop-Function -Message "Failure" -ErrorRecord $_ -Continue
                }
            }
        }
    }
}

tools\dbatools\functions\Invoke-DbatoolsFormatter.ps1

function Invoke-DbatoolsFormatter {
    <#
    .SYNOPSIS
        Helps formatting function files to dbatools' standards

    .DESCRIPTION
        Uses PSSA's Invoke-Formatter to format the target files and saves it without the BOM.

    .PARAMETER Path
        The path to the ps1 file that needs to be formatted

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Formatting
        Author: Simone Bizzotto

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Invoke-DbatoolsFormatter

    .EXAMPLE
        PS C:\> Invoke-DbatoolsFormatter -Path C:\dbatools\functions\Get-DbaDatabase.ps1

        Reformats C:\dbatools\functions\Get-DbaDatabase.ps1 to dbatools' standards

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [object[]]$Path,
        [switch]$EnableException
    )
    begin {
        $HasInvokeFormatter = $null -ne (Get-Command Invoke-Formatter -ErrorAction SilentlyContinue).Version
        if (!($HasInvokeFormatter)) {
            Stop-Function -Message "You need a recent version of PSScriptAnalyzer installed"
        }
        $CBHRex = [regex]'(?smi)\s+<#[^#]*#>'
        $CBHStartRex = [regex]'(?<spaces>[ ]+)<#'
        $CBHEndRex = [regex]'(?<spaces>[ ]*)#>'
    }
    process {
        if (Test-FunctionInterrupt) { return }
        foreach ($p in $Path) {
            try {
                $realPath = (Resolve-Path -Path $p -ErrorAction Stop).Path
            } catch {
                Stop-Function -Message "Cannot find or resolve $p" -Continue
            }

            $content = Get-Content -Path $realPath -Raw -Encoding UTF8
            #strip ending empty lines
            $content = $content -replace "(?s)`r`n\s*$"
            try {
                $content = Invoke-Formatter -ScriptDefinition $content -Settings CodeFormattingOTBS -ErrorAction Stop
            } catch {
                Write-Message -Level Warning "Unable to format $p"
            }
            #match the ending indentation of CBH with the starting one, see #4373
            $CBH = $CBHRex.Match($content).Value
            if ($CBH) {
                #get starting spaces
                $startSpaces = $CBHStartRex.Match($CBH).Groups['spaces']
                if ($startSpaces) {
                    #get end
                    $newCBH = $CBHEndRex.Replace($CBH, "$startSpaces#>")
                    if ($newCBH) {
                        #replace the CBH
                        $content = $content.Replace($CBH, $newCBH)
                    }
                }
            }
            $Utf8NoBomEncoding = New-Object System.Text.UTF8Encoding $False
            $realContent = @()
            #trim whitespace lines
            foreach ($line in $content.Split("`n")) {
                $realContent += $line.TrimEnd()
            }
            [System.IO.File]::WriteAllText($realPath, ($realContent -Join "`r`n"), $Utf8NoBomEncoding)
        }
    }
}

tools\dbatools\functions\Invoke-DbatoolsRenameHelper.ps1

function Invoke-DbatoolsRenameHelper {
    <#
    .SYNOPSIS
        Older dbatools command names have been changed. This script helps keep up.

    .DESCRIPTION
        Older dbatools command names have been changed. This script helps keep up.

    .PARAMETER InputObject
        A piped in object from Get-ChildItem

    .PARAMETER Encoding
        Specifies the file encoding. The default is UTF8.

        Valid values are:
        -- ASCII: Uses the encoding for the ASCII (7-bit) character set.
        -- BigEndianUnicode: Encodes in UTF-16 format using the big-endian byte order.
        -- Byte: Encodes a set of characters into a sequence of bytes.
        -- String: Uses the encoding type for a string.
        -- Unicode: Encodes in UTF-16 format using the little-endian byte order.
        -- UTF7: Encodes in UTF-7 format.
        -- UTF8: Encodes in UTF-8 format.
        -- Unknown: The encoding type is unknown or invalid. The data can be treated as binary.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command

    .NOTES
        Tags: Module
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Invoke-DbatoolsRenameHelper

    .EXAMPLE
        PS C:\> Get-ChildItem C:\temp\ps\*.ps1 -Recurse | Invoke-DbatoolsRenameHelper

        Checks to see if any ps1 file in C:\temp\ps matches an old command name.
        If so, then the command name within the text is updated and the resulting changes are written to disk in UTF-8.

    .EXAMPLE
        PS C:\> Get-ChildItem C:\temp\ps\*.ps1 -Recurse | Invoke-DbatoolsRenameHelper -Encoding Ascii -WhatIf

        Shows what would happen if the command would run. If the command would run and there were matches,
        the resulting changes would be written to disk as Ascii encoded.

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [System.IO.FileInfo[]]$InputObject,
        [ValidateSet('ASCII', 'BigEndianUnicode', 'Byte', 'String', 'Unicode', 'UTF7', 'UTF8', 'Unknown')]
        [string]$Encoding = 'UTF8',
        [switch]$EnableException
    )
    begin {
        $morerenames = @(
            @{
                "AliasName"  = "Invoke-Sqlcmd2"
                "Definition" = "Invoke-DbaQuery"
            },
            @{
                "AliasName"  = "UseLastBackups"
                "Definition" = "UseLastBackup"
            },
            @{
                "AliasName"  = "NetworkShare"
                "Definition" = "SharedPath"
            },
            @{
                "AliasName"  = "NoSystemLogins"
                "Definition" = "ExcludeSystemLogins"
            },
            @{
                "AliasName"  = "NoJobSteps"
                "Definition" = "ExcludeJobSteps"
            },
            @{
                "AliasName"  = "NoSystemObjects"
                "Definition" = "ExcludeSystemObjects"
            },
            @{
                "AliasName"  = "NoJobs"
                "Definition" = "ExcludeJobs"
            },
            @{
                "AliasName"  = "NoDatabases"
                "Definition" = "ExcludeDatabases"
            },
            @{
                "AliasName"  = "NoDisabledJobs"
                "Definition" = "ExcludeDisabledJobs"
            },
            @{
                "AliasName"  = "NoJobSteps"
                "Definition" = "ExcludeJobSteps"
            },
            @{
                "AliasName"  = "NoSystem"
                "Definition" = "ExcludeSystemLogins"
            },
            @{
                "AliasName"  = "NoSystemDb"
                "Definition" = "ExcludeSystem"
            },
            @{
                "AliasName"  = "NoSystemObjects"
                "Definition" = "ExcludeSystemObjects"
            },
            @{
                "AliasName"  = "NoSystemSpid"
                "Definition" = "ExcludeSystemSpids"
            },
            @{
                "AliasName"  = "NoQueryTextColumn"
                "Definition" = "ExcludeQueryTextColumn"
            },
            @{
                "AliasName"  = "ExcludeAllSystemDb"
                "Definition" = "ExcludeSystem"
            },
            @{
                "AliasName"  = "ExcludeAllUserDb"
                "Definition" = "ExcludeUser"
            }
        )

        $allrenames = $script:renames + $morerenames
    }
    process {
        foreach ($fileobject in $InputObject) {
            $file = $fileobject.FullName

            foreach ($name in $allrenames) {
                if ((Select-String -Pattern $name.AliasName -Path $file)) {
                    if ($Pscmdlet.ShouldProcess($file, "Replacing $($name.AliasName) with $($name.Definition)")) {
                        $content = (Get-Content -Path $file -Raw).Replace($name.AliasName, $name.Definition).Trim()
                        Set-Content -Path $file -Encoding $Encoding -Value $content
                        [pscustomobject]@{
                            Path         = $file
                            Pattern      = $name.AliasName
                            ReplacedWith = $name.Definition
                        }
                    }
                }
            }
        }
    }
}

tools\dbatools\functions\Invoke-DbaWhoisActive.ps1

function Invoke-DbaWhoIsActive {
    <#
    .SYNOPSIS
        Outputs results of Adam Machanic's sp_WhoIsActive DataTable

    .DESCRIPTION
        Output results of Adam Machanic's sp_WhoIsActive

        This command was built with Adam's permission. To read more about sp_WhoIsActive, please visit:

        Updates: http://sqlblog.com/blogs/adam_machanic/archive/tags/who+is+active/default.aspx

        Also, consider donating to Adam if you find this stored procedure helpful: http://tinyurl.com/WhoIsActiveDonate

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2000 or higher.

    .PARAMETER Database
        The database where sp_WhoIsActive is installed. Defaults to master. If the sp_WhoIsActive is not installed, the command will warn and exit.

    .PARAMETER Filter
        FiltersBoth inclusive and exclusive
        Set either filter to '' to disable
        Session is a session ID, and either 0 or '' can be used to indicate "all" sessions
        All other filter types support % or _ as wildcards

    .PARAMETER FilterType
        Valid filter types are: session, program, database, login, and host

    .PARAMETER NotFilter
        FiltersBoth inclusive and exclusive
        Set either filter to '' to disable
        Session is a session ID, and either 0 or '' can be used to indicate "all" sessions
        All other filter types support % or _ as wildcards

    .PARAMETER NotFilterType
        Valid filter types are: session, program, database, login, and host

    .PARAMETER ShowOwnSpid
        Retrieve data about the calling session?

    .PARAMETER ShowSystemSpids
        Retrieve data about system sessions?

    .PARAMETER ShowSleepingSpids
        Controls how sleeping SPIDs are handled, based on the idea of levels of interest
        0 does not pull any sleeping SPIDs
        1 pulls only those sleeping SPIDs that also have an open transaction
        2 pulls all sleeping SPIDs

    .PARAMETER GetFullInnerText
        If 1, gets the full stored procedure or running batch, when available
        If 0, gets only the actual statement that is currently running in the batch or procedure

    .PARAMETER GetPlans
        Get associated query plans for running tasks, if available
        If 1, gets the plan based on the request's statement offset
        If 2, gets the entire plan based on the request's plan_handle

    .PARAMETER GetOuterCommand
        Get the associated outer ad hoc query or stored procedure call, if available

    .PARAMETER GetTransactionInfo
        Enables pulling transaction log write info and transaction duration

    .PARAMETER GetTaskInfo
        Get information on active tasks, based on three interest levels
        Level 0 does not pull any task-related information
        Level 1 is a lightweight mode that pulls the top non-CXPACKET wait, giving preference to blockers
        Level 2 pulls all available task-based metrics, including:
        number of active tasks, current wait stats, physical I/O, context switches, and blocker information

    .PARAMETER GetLocks
        Gets associated locks for each request, aggregated in an XML format

    .PARAMETER GetAverageTime
        Get average time for past runs of an active query
        (based on the combination of plan handle, sql handle, and offset)

    .PARAMETER GetAdditonalInfo
        Get additional non-performance-related information about the session or request
        text_size, language, date_format, date_first, quoted_identifier, arithabort, ansi_null_dflt_on,
        ansi_defaults, ansi_warnings, ansi_padding, ansi_nulls, concat_null_yields_null,
        transaction_isolation_level, lock_timeout, deadlock_priority, row_count, command_type

        If a SQL Agent job is running, an subnode called agent_info will be populated with some or all of
        the following: job_id, job_name, step_id, step_name, msdb_query_error (in the event of an error)

        If @get_task_info is set to 2 and a lock wait is detected, a subnode called block_info will be
        populated with some or all of the following: lock_type, database_name, object_id, file_id, hobt_id,
        applock_hash, metadata_resource, metadata_class_id, object_name, schema_name

    .PARAMETER FindBlockLeaders
        Walk the blocking chain and count the number of
        total SPIDs blocked all the way down by a given session
        Also enables task_info Level 1, if @get_task_info is set to 0

    .PARAMETER DeltaInterval
        Pull deltas on various metrics
        Interval in seconds to wait before doing the second data pull

    .PARAMETER OutputColumnList
        List of desired output columns, in desired order
        Note that the final output will be the intersection of all enabled features and all
        columns in the list. Therefore, only columns associated with enabled features will
        actually appear in the output. Likewise, removing columns from this list may effectively
        disable features, even if they are turned on

        Each element in this list must be one of the valid output column names. Names must be
        delimited by square brackets. White space, formatting, and additional characters are
        allowed, as long as the list contains exact matches of delimited valid column names.

    .PARAMETER SortOrder
        Column(s) by which to sort output, optionally with sort directions.
        Valid column choices:
        session_id, physical_io, reads, physical_reads, writes, tempdb_allocations,
        tempdb_current, CPU, context_switches, used_memory, physical_io_delta,
        reads_delta, physical_reads_delta, writes_delta, tempdb_allocations_delta,
        tempdb_current_delta, CPU_delta, context_switches_delta, used_memory_delta,
        tasks, tran_start_time, open_tran_count, blocking_session_id, blocked_session_count,
        percent_complete, host_name, login_name, database_name, start_time, login_time

        Note that column names in the list must be bracket-delimited. Commas and/or white
        space are not required.

    .PARAMETER FormatOutput
        Formats some of the output columns in a more "human readable" form
        0 disables output format
        1 formats the output for variable-width fonts
        2 formats the output for fixed-width fonts

    .PARAMETER DestinationTable
        If set to a non-blank value, the script will attempt to insert into the specified destination table. Please note that the script will not verify that the table exists, or that it has the correct schema, before doing the insert. Table can be specified in one, two, or three-part format

    .PARAMETER ReturnSchema
        If set to 1, no data collection will happen and no result set will be returned; instead,
        a CREATE TABLE statement will be returned via the @schema parameter, which will match
        the schema of the result set that would be returned by using the same collection of the
        rest of the parameters. The CREATE TABLE statement will have a placeholder token of
        <table_name> in place of an actual table name.

    .PARAMETER Schema
        If set to 1, no data collection will happen and no result set will be returned; instead,
        a CREATE TABLE statement will be returned via the @schema parameter, which will match
        the schema of the result set that would be returned by using the same collection of the
        rest of the parameters. The CREATE TABLE statement will have a placeholder token of
        <table_name> in place of an actual table name.

    .PARAMETER Help
        Help! What do I do?

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: AdamMechanic, WhoIsActive, SpWhoIsActive
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Invoke-DbaWhoIsActive

    .EXAMPLE
        PS C:\> Invoke-DbaWhoIsActive -SqlInstance sqlserver2014a

        Execute sp_whoisactive on sqlserver2014a. This command expects sp_WhoIsActive to be in the master database. Logs into the SQL Server with Windows credentials.

    .EXAMPLE
        PS C:\> Invoke-DbaWhoIsActive -SqlInstance sqlserver2014a -SqlCredential $credential -Database dbatools

        Execute sp_whoisactive on sqlserver2014a. This command expects sp_WhoIsActive to be in the dbatools database. Logs into the SQL Server with SQL Authentication.

    .EXAMPLE
        PS C:\> Invoke-DbaWhoIsActive -SqlInstance sqlserver2014a -GetAverageTime

        Similar to running sp_WhoIsActive @get_avg_time

    .EXAMPLE
        PS C:\> Invoke-DbaWhoIsActive -SqlInstance sqlserver2014a -GetOuterCommand -FindBlockLeaders

        Similar to running sp_WhoIsActive @get_outer_command = 1, @find_block_leaders = 1

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias('ServerInstance', 'SqlServer')]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]
        $SqlCredential,
        [object]$Database,
        [Alias('As')]
        [ValidateLength(0, 128)]
        [string]$Filter,
        [ValidateSet('Session', 'Program', 'Database', 'Login', 'Host')]
        [string]$FilterType = 'Session',
        [ValidateLength(0, 128)]
        [string]$NotFilter,
        [ValidateSet('Session', 'Program', 'Database', 'Login', 'Host')]
        [string]$NotFilterType = 'Session',
        [switch]$ShowOwnSpid,
        [switch]$ShowSystemSpids,
        [ValidateRange(0, 255)]
        [int]$ShowSleepingSpids,
        [switch]$GetFullInnerText,
        [ValidateRange(0, 255)]
        [int]$GetPlans,
        [switch]$GetOuterCommand,
        [switch]$GetTransactionInfo,
        [ValidateRange(0, 2)]
        [int]$GetTaskInfo,
        [switch]$GetLocks,
        [switch]$GetAverageTime,
        [switch]$GetAdditonalInfo,
        [switch]$FindBlockLeaders,
        [ValidateRange(0, 255)]
        [int]$DeltaInterval,
        [ValidateLength(0, 8000)]
        [string]$OutputColumnList = '[dd%][session_id][sql_text][sql_command][login_name][wait_info][tasks][tran_log%][cpu%][temp%][block%][reads%][writes%][context%][physical%][query_plan][locks][%]',
        [ValidateLength(0, 500)]
        [string]$SortOrder = '[start_time] ASC',
        [ValidateRange(0, 255)]
        [int]$FormatOutput = 1,
        [ValidateLength(0, 4000)]
        [string]$DestinationTable = '',
        [switch]$ReturnSchema,
        [string]$Schema,
        [switch]$Help,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        $passedparams = $psboundparameters.Keys | Where-Object { 'Silent', 'SqlServer', 'SqlCredential', 'OutputAs', 'ServerInstance', 'SqlInstance', 'Database' -notcontains $_ }
        $localparams = $psboundparameters
    }

    process {

        foreach ($instance in $sqlinstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            if ($server.VersionMajor -lt 9) {
                throw "sp_WhoIsActive is only supported in SQL Server 2005 and above"
            }

            $paramdictionary = @{
                Filter             = '@filter'
                FilterType         = '@filter_type'
                NotFilter          = 'not_filter'
                NotFilterType      = '@not_filter_type'
                ShowOwnSpid        = '@show_own_spid'
                ShowSystemSpids    = '@show_system_spids'
                ShowSleepingSpids  = '@show_sleeping_spids'
                GetFullInnerText   = '@get_full_inner_text'
                GetPlans           = '@get_plans'
                GetOuterCommand    = '@get_outer_command'
                GetTransactionInfo = '@get_transaction_info'
                GetTaskInfo        = '@get_task_info'
                GetLocks           = '@get_locks '
                GetAverageTime     = '@get_avg_time'
                GetAdditonalInfo   = '@get_additional_info'
                FindBlockLeaders   = '@find_block_leaders'
                DeltaInterval      = '@delta_interval'
                OutputColumnList   = '@output_column_list'
                SortOrder          = '@sort_order'
                FormatOutput       = '@format_output '
                DestinationTable   = '@destination_table '
                ReturnSchema       = '@return_schema'
                Schema             = '@schema'
                Help               = '@help'
            }

            Write-Message -Level Verbose -Message "Collecting sp_whoisactive data from server: $instance"
            try {
                $sqlconnection = New-Object System.Data.SqlClient.SqlConnection
                $sqlconnection.ConnectionString = $server.ConnectionContext.ConnectionString
                $sqlconnection.Open()

                if ($Database) {
                    # database is being returned as something weird. change it to string without using a method then trim.
                    $Database = "$Database"
                    $Database = $Database.Trim()
                    $sqlconnection.ChangeDatabase($Database)
                }

                $sqlcommand = New-Object System.Data.SqlClient.SqlCommand
                $sqlcommand.CommandType = "StoredProcedure"
                $sqlcommand.CommandText = "dbo.sp_WhoIsActive"
                $sqlcommand.Connection = $sqlconnection

                foreach ($param in $passedparams) {
                    Write-Message -Level Verbose -Message "Check parameter '$param'"

                    $sqlparam = $paramdictionary[$param]

                    if ($sqlparam) {

                        $value = $localparams[$param]

                        switch ($value) {
                            $true { $value = 1 }
                            $false { $value = 0 }
                        }
                        Write-Message -Level Verbose -Message "Adding parameter '$sqlparam' with value '$value'"
                        [Void]$sqlcommand.Parameters.AddWithValue($sqlparam, $value)
                    }
                }

                $datatable = New-Object system.Data.DataSet
                $dataadapter = New-Object system.Data.SqlClient.SqlDataAdapter($sqlcommand)
                $dataadapter.fill($datatable) | Out-Null
                $datatable.Tables.Rows
            } catch {
                if ($_.Exception.InnerException -Like "*Could not find*") {
                    Stop-Function -Message "sp_whoisactive not found, please install using Install-DbaWhoIsActive." -Continue
                } else {
                    Stop-Function -Message "Invalid query." -Continue
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Show-SqlWhoIsActive -CustomMessage "Show-SqlWhoIsActive is no longer supported. Use Invoke-DbaWhoIsActive | Out-GridView for similar results."
    }
}

tools\dbatools\functions\Invoke-DbaXEReplay.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Invoke-DbaXeReplay {
    <#
    .SYNOPSIS
        This command replays events from Read-DbaXEFile on one or more target servers

    .DESCRIPTION
        This command replays events from Read-DbaXEFile. It is simplistic in its approach.

        - Writes all queries to a temp sql file
        - Executes temp file using . $sqlcmd so that batches are executed properly
        - Deletes temp file

    .PARAMETER SqlInstance
        Target SQL Server(s)

    .PARAMETER SqlCredential
        Used to provide alternative credentials.

    .PARAMETER Database
        The initial starting database.

    .PARAMETER Event
        Each Response can be limited to processing specific events, while ignoring all the other ones. When this attribute is omitted, all events are processed.

    .PARAMETER Raw
        By dafault, the results of . $sqlcmd are collected, cleaned up and displayed. If you'd like to see all results immeidately, use Raw.

    .PARAMETER InputObject
        Accepts the object output of Read-DbaXESession.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: ExtendedEvent, XE, XEvent
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Invoke-DbaXEReplay

    .EXAMPLE
        PS C:\> Read-DbaXEFile -Path C:\temp\sample.xel | Invoke-DbaXeReplay -SqlInstance sql2017

        Runs all batch_text for sql_batch_completed against tempdb on sql2017.

    .EXAMPLE
        PS C:\> Read-DbaXEFile -Path C:\temp\sample.xel | Invoke-DbaXeReplay -SqlInstance sql2017 -Database planning -Event sql_batch_completed

        Sets the *initial* database to planning then runs only sql_batch_completed against sql2017.

    .EXAMPLE
        PS C:\> Read-DbaXEFile -Path C:\temp\sample.xel | Invoke-DbaXeReplay -SqlInstance sql2017, sql2016

        Runs all batch_text for sql_batch_completed against tempdb on sql2017 and sql2016.


    #>
    [Cmdletbinding()]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseOutputTypeCorrectly", "", Justification = "PSSA Rule Ignored by BOH")]
    param (
        [Parameter(Mandatory)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstance[]]$SqlInstance,
        [Alias("Credential")]
        [PsCredential]$SqlCredential,
        [string[]]$Database,
        [string[]]$Event = @('sql_batch_completed', 'rcp_completed'),
        [Parameter(Mandatory, ValueFromPipeline)]
        [object]$InputObject,
        [switch]$Raw,
        [switch]$EnableException
    )

    begin {
        #Variable marked as unused by PSScriptAnalyzer
        #$querycolumns = 'statement', 'batch_text'
        $timestamp = (Get-Date -Format yyyyMMddHHmm)
        $temp = ([System.IO.Path]::GetTempPath()).TrimEnd("\")
        $filename = "$temp\dbatools-replay-$timestamp.sql"
        Set-Content $filename -Value $null

        $sqlcmd = "$script:PSModuleRoot\bin\sqlcmd\sqlcmd.exe"
    }
    process {
        if (Test-FunctionInterrupt) { return }
        if ($InputObject.Name -notin $Event) {
            continue
        }

        if ($InputObject.statement) {
            if ($InputObject.statement -notmatch "ALTER EVENT SESSION") {
                Add-Content -Path $filename -Value $InputObject.statement
                Add-Content -Path $filename -Value "GO"
            }
        } else {
            if ($InputObject.batch_text -notmatch "ALTER EVENT SESSION") {
                Add-Content -Path $filename -Value $InputObject.batch_text
                Add-Content -Path $filename -Value "GO"
            }
        }
    }
    end {
        if (Test-FunctionInterrupt) { return }
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -ErrorRecord $_ -Target $instance -Continue
            }


            if ($Raw) {
                Write-Message -Message "Invoking XEReplay against $instance running on $($server.name) with raw output" -Level Verbose
                if (Test-Bound -ParameterName SqlCredential) {
                    . $sqlcmd -S $instance -i $filename -U $SqlCredential.Username -P $SqlCredential.GetNetworkCredential().Password
                    continue
                } else {
                    . $sqlcmd -S $instance -i $filename
                    continue
                }
            }

            Write-Message -Message "Invoking XEReplay against $instance running on $($server.name)" -Level Verbose
            if (Test-Bound -ParameterName SqlCredential) {
                $output = . $sqlcmd -S $instance -i $filename -U $SqlCredential.Username -P $SqlCredential.GetNetworkCredential().Password
            } else {
                $output = . $sqlcmd -S $instance -i $filename
            }

            foreach ($line in $output) {
                $newline = $line.Trim()
                if ($newline -and $newline -notmatch "------------------------------------------------------------------------------------") {
                    "$newline"
                }
            }
        }
        Remove-Item -Path $filename -ErrorAction Ignore
    }
}

tools\dbatools\functions\Invoke-SqlCmd2.ps1

function Invoke-Sqlcmd2 {
    <#
    .SYNOPSIS
        Runs a T-SQL script.

    .DESCRIPTION
        Runs a T-SQL script. Invoke-Sqlcmd2 runs the whole script and only captures the first selected result set, such as the output of PRINT statements when -verbose parameter is specified.
        Parameterized queries are supported.

        Help details below borrowed from Invoke-Sqlcmd

    .PARAMETER ServerInstance
        Specifies the SQL Server instance(s) to execute the query against.

    .PARAMETER Database
        Specifies the name of the database to execute the query against. If specified, this database will be used in the ConnectionString when establishing the connection to SQL Server.

        If a SQLConnection is provided, the default database for that connection is overridden with this database.

    .PARAMETER Query
        Specifies one or more queries to be run. The queries can be Transact-SQL, XQuery statements, or sqlcmd commands. Multiple queries in a single batch may be separated by a semicolon.

        Do not specify the sqlcmd GO separator (or, use the ParseGo parameter). Escape any double quotation marks included in the string.

        Consider using bracketed identifiers such as [MyTable] instead of quoted identifiers such as "MyTable".

    .PARAMETER InputFile
        Specifies the full path to a file to be used as the query input to Invoke-Sqlcmd2. The file can contain Transact-SQL statements, XQuery statements, sqlcmd commands and scripting variables.

    .PARAMETER Credential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

        SECURITY NOTE: If you use the -Debug switch, the connectionstring including plain text password will be sent to the debug stream.

    .PARAMETER Encrypt
        If this switch is enabled, the connection to SQL Server will be made using SSL.

        This requires that the SQL Server has been set up to accept SSL requests. For information regarding setting up SSL on SQL Server, see https://technet.microsoft.com/en-us/library/ms189067(v=sql.105).aspx

    .PARAMETER QueryTimeout
        Specifies the number of seconds before the queries time out.

    .PARAMETER ConnectionTimeout
        Specifies the number of seconds before Invoke-Sqlcmd2 times out if it cannot successfully connect to an instance of the Database Engine. The timeout value must be an integer between 0 and 65534. If 0 is specified, connection attempts do not time out.

    .PARAMETER As
        Specifies output type. Valid options for this parameter are 'DataSet', 'DataTable', 'DataRow', 'PSObject', and 'SingleValue'

        PSObject output introduces overhead but adds flexibility for working with results: http://powershell.org/wp/forums/topic/dealing-with-dbnull/

    .PARAMETER SqlParameters
        Specifies a hashtable of parameters for parameterized SQL queries.  http://blog.codinghorror.com/give-me-parameterized-sql-or-give-me-death/

        Example:

    .PARAMETER AppendServerInstance
        If this switch is enabled, the SQL Server instance will be appended to PSObject and DataRow output.

    .PARAMETER ParseGo
        If this switch is enabled, "GO" statements will be handled automatically.
        Every "GO" will effectively run in a separate query, like if you issued multiple Invoke-SqlCmd2 commands.
        "GO"s will be recognized if they are on a single line, as this covers
        the 95% of the cases "GO" parsing is needed
        Note:
        Queries will always target that database, e.g. if you have this Query:
        USE DATABASE [dbname]
        GO
        SELECT * from sys.tables
        and you call it via
        Invoke-SqlCmd2 -ServerInstance instance -Database msdb -Query ...
        you'll get back tables from msdb, not dbname.


    .PARAMETER SQLConnection
        Specifies an existing SQLConnection object to use in connecting to SQL Server. If the connection is closed, an attempt will be made to open it.

    .INPUTS
        None
        You cannot pipe objects to Invoke-Sqlcmd2

    .OUTPUTS
        As PSObject:     System.Management.Automation.PSCustomObject
        As DataRow:      System.Data.DataRow
        As DataTable:    System.Data.DataTable
        As DataSet:      System.Data.DataTableCollectionSystem.Data.DataSet
        As SingleValue:  Dependent on data type in first column.

    .EXAMPLE
        Invoke-Sqlcmd2 -ServerInstance "MyComputer\MyInstance" -Query "SELECT login_time AS 'StartTime' FROM sysprocesses WHERE spid = 1"

        Connects to a named instance of the Database Engine on a computer and runs a basic T-SQL query.

        StartTime
        -----------
        2010-08-12 21:21:03.593

    .EXAMPLE
        Invoke-Sqlcmd2 -ServerInstance "MyComputer\MyInstance" -InputFile "C:\MyFolder\tsqlscript.sql" | Out-File -filePath "C:\MyFolder\tsqlscript.rpt"

        Reads a file containing T-SQL statements, runs the file, and writes the output to another file.

    .EXAMPLE
        Invoke-Sqlcmd2  -ServerInstance "MyComputer\MyInstance" -Query "PRINT 'hello world'" -Verbose

        Uses the PowerShell -Verbose parameter to return the message output of the PRINT command.
        VERBOSE: hello world

    .EXAMPLE
        Invoke-Sqlcmd2 -ServerInstance MyServer\MyInstance -Query "SELECT ServerName, VCNumCPU FROM tblServerInfo" -as PSObject | ?{$_.VCNumCPU -gt 8}
        Invoke-Sqlcmd2 -ServerInstance MyServer\MyInstance -Query "SELECT ServerName, VCNumCPU FROM tblServerInfo" -as PSObject | ?{$_.VCNumCPU}

        This example uses the PSObject output type to allow more flexibility when working with results.

        If we used DataRow rather than PSObject, we would see the following behavior:
        Each row where VCNumCPU does not exist would produce an error in the first example
        Results would include rows where VCNumCPU has DBNull value in the second example

    .EXAMPLE
        'Instance1', 'Server1/Instance1', 'Server2' | Invoke-Sqlcmd2 -query "Sp_databases" -as psobject -AppendServerInstance

        This example lists databases for each instance.  It includes a column for the ServerInstance in question.
        DATABASE_NAME          DATABASE_SIZE REMARKS        ServerInstance
        -------------          ------------- -------        --------------
        REDACTED                       88320                Instance1
        master                         17920                Instance1
    ...
        msdb                          618112                Server1/Instance1
        tempdb                        563200                Server1/Instance1
    ...
        OperationsManager           20480000                Server2

    .EXAMPLE
        #Construct a query using SQL parameters
        $Query = "SELECT ServerName, VCServerClass, VCServerContact FROM tblServerInfo WHERE VCServerContact LIKE @VCServerContact AND VCServerClass LIKE @VCServerClass"

        #Run the query, specifying values for SQL parameters
        Invoke-Sqlcmd2 -ServerInstance SomeServer\NamedInstance -Database ServerDB -query $query -SqlParameters @{ VCServerContact="%cookiemonster%"; VCServerClass="Prod" }

        ServerName    VCServerClass VCServerContact
        ----------    ------------- ---------------
        SomeServer1   Prod          cookiemonster, blah
        SomeServer2   Prod          cookiemonster
        SomeServer3   Prod          blah, cookiemonster

    .EXAMPLE
        Invoke-Sqlcmd2 -SQLConnection $Conn -Query "SELECT login_time AS 'StartTime' FROM sysprocesses WHERE spid = 1"

        Uses an existing SQLConnection and runs a basic T-SQL query against it

        StartTime
        -----------
        2010-08-12 21:21:03.593

    .EXAMPLE
        Invoke-SqlCmd -SQLConnection $Conn -Query "SELECT ServerName FROM tblServerInfo WHERE ServerName LIKE @ServerName" -SqlParameters @{"ServerName = "c-is-hyperv-1"}

        Executes a parameterized query against the existing SQLConnection, with a collection of one parameter to be passed to the query when executed.

    .NOTES
        Changelog moved to CHANGELOG.md:

        https://github.com/sqlcollaborative/Invoke-SqlCmd2/blob/master/CHANGELOG.md

    .LINK
        https://github.com/sqlcollaborative/Invoke-SqlCmd2

    .LINK
        https://github.com/RamblingCookieMonster/PowerShell

    .FUNCTIONALITY
        SQL

#>

    [CmdletBinding(DefaultParameterSetName = 'Ins-Que')]
    [OutputType([System.Management.Automation.PSCustomObject], [System.Data.DataRow], [System.Data.DataTable], [System.Data.DataTableCollection], [System.Data.DataSet])]
    param (
        [Parameter(ParameterSetName = 'Ins-Que',
            Position = 0,
            Mandatory,
            ValueFromPipeline,
            ValueFromPipelineByPropertyName = $true,
            ValueFromRemainingArguments = $false,
            HelpMessage = 'SQL Server Instance required...')]
        [Parameter(ParameterSetName = 'Ins-Fil',
            Position = 0,
            Mandatory,
            ValueFromPipeline,
            ValueFromPipelineByPropertyName = $true,
            ValueFromRemainingArguments = $false,
            HelpMessage = 'SQL Server Instance required...')]
        [Alias('Instance', 'Instances', 'ComputerName', 'Server', 'Servers', 'SqlInstance')]
        [ValidateNotNullOrEmpty()]
        [string[]]$ServerInstance,
        [Parameter(Position = 1,
            ValueFromPipelineByPropertyName = $true,
            ValueFromRemainingArguments = $false)]
        [string]$Database,
        [Parameter(ParameterSetName = 'Ins-Que',
            Position = 2,
            Mandatory,
            ValueFromPipelineByPropertyName = $true,
            ValueFromRemainingArguments = $false)]
        [Parameter(ParameterSetName = 'Con-Que',
            Position = 2,
            Mandatory,
            ValueFromPipelineByPropertyName = $true,
            ValueFromRemainingArguments = $false)]
        [string]$Query,
        [Parameter(ParameterSetName = 'Ins-Fil',
            Position = 2,
            Mandatory,
            ValueFromPipelineByPropertyName = $true,
            ValueFromRemainingArguments = $false)]
        [Parameter(ParameterSetName = 'Con-Fil',
            Position = 2,
            Mandatory,
            ValueFromPipelineByPropertyName = $true,
            ValueFromRemainingArguments = $false)]
        [ValidateScript( { Test-Path -LiteralPath $_ })]
        [string]$InputFile,
        [Parameter(ParameterSetName = 'Ins-Que',
            Position = 3,
            ValueFromPipelineByPropertyName = $true,
            ValueFromRemainingArguments = $false)]
        [Parameter(ParameterSetName = 'Ins-Fil',
            Position = 3,
            ValueFromPipelineByPropertyName = $true,
            ValueFromRemainingArguments = $false)]
        [Alias('SqlCredential')]
        [System.Management.Automation.PSCredential]$Credential,
        [Parameter(ParameterSetName = 'Ins-Que',
            Position = 4,
            ValueFromRemainingArguments = $false)]
        [Parameter(ParameterSetName = 'Ins-Fil',
            Position = 4,
            ValueFromRemainingArguments = $false)]
        [switch]$Encrypt,
        [Parameter(Position = 5,
            ValueFromPipelineByPropertyName = $true,
            ValueFromRemainingArguments = $false)]
        [Int32]$QueryTimeout = 600,
        [Parameter(ParameterSetName = 'Ins-Fil',
            Position = 6,
            ValueFromPipelineByPropertyName = $true,
            ValueFromRemainingArguments = $false)]
        [Parameter(ParameterSetName = 'Ins-Que',
            Position = 6,
            ValueFromPipelineByPropertyName = $true,
            ValueFromRemainingArguments = $false)]
        [Int32]$ConnectionTimeout = 15,
        [Parameter(Position = 7,
            ValueFromPipelineByPropertyName = $true,
            ValueFromRemainingArguments = $false)]
        [ValidateSet("DataSet", "DataTable", "DataRow", "PSObject", "SingleValue")]
        [string]$As = "DataRow",
        [Parameter(Position = 8,
            ValueFromPipelineByPropertyName = $true,
            ValueFromRemainingArguments = $false)]
        [System.Collections.IDictionary]$SqlParameters,
        [Parameter(Position = 9)]
        [switch]$AppendServerInstance,
        [Parameter(Position = 10)]
        [switch]$ParseGO,
        [Parameter(ParameterSetName = 'Con-Que',
            Position = 11,
            ValueFromPipeline = $false,
            ValueFromPipelineByPropertyName = $false,
            ValueFromRemainingArguments = $false)]
        [Parameter(ParameterSetName = 'Con-Fil',
            Position = 11,
            ValueFromPipeline = $false,
            ValueFromPipelineByPropertyName = $false,
            ValueFromRemainingArguments = $false)]
        [Alias('Connection', 'Conn')]
        [ValidateNotNullOrEmpty()]
        [System.Data.SqlClient.SQLConnection]$SQLConnection
    )

    process {
        Write-Message -Level Warning -Message "This command is no longer supported. Please use Invoke-DbaQuery instead."
    }
}

tools\dbatools\functions\Join-DbaAvailabilityGroup.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Join-DbaAvailabilityGroup {
    <#
    .SYNOPSIS
        Joins a secondary replica to an availability group on a SQL Server instance.

    .DESCRIPTION
        Joins a secondary replica to an availability group on a SQL Server instance.

   .PARAMETER SqlInstance
        The target SQL Server instance or instances. Server version must be SQL Server version 2012 or higher.

    .PARAMETER SqlCredential
        Login to the SqlInstance instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER AvailabilityGroup
        The availability group to join.

    .PARAMETER ClusterType
        Cluster type of the Availability Group. Only supported in SQL Server 2017 and above.
        Options include: External, Wsfc or None.

    .PARAMETER InputObject
        Enables piped input from Get-DbaAvailabilityGroup.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: AvailabilityGroup, HA, AG
        Author: Chrissy LeMaire (@cl), netnerds.net
        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Join-DbaAvailabilityGroup

    .EXAMPLE
        PS C:\> Get-DbaAvailabilityGroup -SqlInstance sql01 -AvailabilityGroup SharePoint | Join-DbaAvailabilityGroup -SqlInstance sql02

        Joins sql02 to the SharePoint availability group on sql01

    .EXAMPLE
        PS C:\> $ag = Get-DbaAvailabilityGroup -SqlInstance sql01 -AvailabilityGroup SharePoint
        PS C:\> Join-DbaAvailabilityGroup -SqlInstance sql02 -InputObject $ag

        Joins sql02 to the SharePoint availability group on sql01

    .EXAMPLE
        PS C:\> Get-DbaAvailabilityGroup -SqlInstance sql01 -AvailabilityGroup SharePoint | Join-DbaAvailabilityGroup -SqlInstance sql02 -WhatIf

        Shows what would happen if the command were to run. No actions are actually performed.

    .EXAMPLE
        PS C:\> Get-DbaAvailabilityGroup -SqlInstance sql01 -AvailabilityGroup SharePoint | Join-DbaAvailabilityGroup -SqlInstance sql02 -Confirm

        Prompts for confirmation then joins sql02 to the SharePoint availability group on sql01.
    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'Low')]
    param (
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$AvailabilityGroup,
        [ValidateSet('External', 'Wsfc', 'None')]
        [string]$ClusterType,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.AvailabilityGroup[]]$InputObject,
        [switch]$EnableException
    )
    process {

        if ($InputObject) {
            $AvailabilityGroup += $InputObject.Name
            if (-not $ClusterType) {
                $tempclustertype = ($InputObject | Select-Object -First 1).ClusterType
                if ($tempclustertype) {
                    $ClusterType = $tempclustertype
                }
            }
        }

        if (-not $AvailabilityGroup) {
            Stop-Function -Message "No availability group to add"
            return
        }

        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            foreach ($ag in $AvailabilityGroup) {
                if ($Pscmdlet.ShouldProcess($server.Name, "Joining $ag")) {
                    try {
                        if ($ClusterType -and $server.VersionMajor -ge 14) {
                            $server.Query("ALTER AVAILABILITY GROUP [$ag] JOIN WITH (CLUSTER_TYPE = $ClusterType)")
                        } else {
                            $server.JoinAvailabilityGroup($ag)
                        }
                    } catch {
                        Stop-Function -Message "Failure" -ErrorRecord $_ -Continue
                    }
                }
            }
        }
    }
}

tools\dbatools\functions\Measure-DbaBackupThroughput.ps1

function Measure-DbaBackupThroughput {
    <#
    .SYNOPSIS
        Determines how quickly SQL Server is backing up databases to media.

    .DESCRIPTION
        Returns backup history details for one or more databases on a SQL Server.

        Output looks like this:
        SqlInstance     : sql2016
        Database        : SharePoint_Config
        AvgThroughput   : 1.07 MB
        AvgSize         : 24.17
        AvgDuration     : 00:00:01.1000000
        MinThroughput   : 0.02 MB
        MaxThroughput   : 2.26 MB
        MinBackupDate   : 8/6/2015 10:22:01 PM
        MaxBackupDate   : 6/19/2016 12:57:45 PM
        BackupCount     : 10

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The database(s) to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        The database(s) to exclude. Options for this list are auto-populated from the server.

    .PARAMETER Type
        By default, this command measures the speed of Full backups. Valid options are "Full", "Log" and "Differential".

    .PARAMETER Since
        All backups taken on or after the point in time represented by this datetime object will be processed.

    .PARAMETER Last
        If this switch is enabled, only the last backup will be measured.

    .PARAMETER DeviceType
        Specifies one or more DeviceTypes to use in filtering backup sets. Valid values are "Disk", "Permanent Disk Device", "Tape", "Permanent Tape Device", "Pipe", "Permanent Pipe Device" and "Virtual Device", as well as custom integers for your own DeviceTypes.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Backup, Database
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Measure-DbaBackupThroughput

    .EXAMPLE
        PS C:\> Measure-DbaBackupThroughput -SqlInstance sql2016

        Parses every backup in msdb's backuphistory for stats on all databases.

    .EXAMPLE
        PS C:\> Measure-DbaBackupThroughput -SqlInstance sql2016 -Database AdventureWorks2014

        Parses every backup in msdb's backuphistory for stats on AdventureWorks2014.

    .EXAMPLE
        PS C:\> Measure-DbaBackupThroughput -SqlInstance sql2005 -Last

        Processes the last full, diff and log backups every backup for all databases on sql2005.

    .EXAMPLE
        PS C:\> Measure-DbaBackupThroughput -SqlInstance sql2005 -Last -Type Log

        Processes the last log backups every backup for all databases on sql2005.

    .EXAMPLE
        PS C:\> Measure-DbaBackupThroughput -SqlInstance sql2016 -Since (Get-Date).AddDays(-7) | Where-Object { $_.MinThroughput.Gigabyte -gt 1 }

        Gets backup calculations for the last week and filters results that have a minimum of 1GB throughput

    .EXAMPLE
        PS C:\> Measure-DbaBackupThroughput -SqlInstance sql2016 -Since (Get-Date).AddDays(-365) -Database bigoldb

        Gets backup calculations, limited to the last year and only the bigoldb database

    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "Instance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [datetime]$Since,
        [switch]$Last,
        [ValidateSet("Full", "Log", "Differential", "File", "Differential File", "Partial Full", "Partial Differential")]
        [string]$Type = "Full",
        [string[]]$DeviceType,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            if ($Database) {
                $DatabaseCollection = $server.Databases | Where-Object Name -in $Database
            } else {
                $DatabaseCollection = $server.Databases
            }

            if ($ExcludeDatabase) {
                $DatabaseCollection = $DatabaseCollection | Where-Object Name -NotIn $ExcludeDatabase
            }

            foreach ($db in $DatabaseCollection) {
                Write-Message -Level VeryVerbose -Message "Retrieving history for $db."
                $allhistory = @()

                # Splatting didn't work
                if ($since) {
                    $histories = Get-DbaBackupHistory -SqlInstance $server -Database $db.name -Since $since -DeviceType $DeviceType -Type $Type
                } else {
                    $histories = Get-DbaBackupHistory -SqlInstance $server -Database $db.name -Last:$last -DeviceType $DeviceType -Type $Type
                }

                foreach ($history in $histories) {
                    $timetaken = New-TimeSpan -Start $history.Start -End $history.End

                    if ($timetaken.TotalMilliseconds -eq 0) {
                        $throughput = $history.TotalSize.Megabyte
                    } else {
                        $throughput = $history.TotalSize.Megabyte / $timetaken.TotalSeconds
                    }

                    Add-Member -Force -InputObject $history -MemberType Noteproperty -Name MBps -value $throughput

                    $allhistory += $history | Select-Object ComputerName, InstanceName, SqlInstance, Database, MBps, TotalSize, Start, End
                }

                Write-Message -Level VeryVerbose -Message "Calculating averages for $db."
                foreach ($db in ($allhistory | Sort-Object Database | Group-Object Database)) {

                    $measuremb = $db.Group.MBps | Measure-Object -Average -Minimum -Maximum
                    $measurestart = $db.Group.Start | Measure-Object -Minimum
                    $measureend = $db.Group.End | Measure-Object -Maximum
                    $measuresize = $db.Group.TotalSize.Megabyte | Measure-Object -Average
                    $avgduration = $db.Group | ForEach-Object { New-TimeSpan -Start $_.Start -End $_.End } | Measure-Object -Average TotalSeconds

                    [pscustomobject]@{
                        ComputerName  = $db.Group.ComputerName | Select-Object -First 1
                        InstanceName  = $db.Group.InstanceName | Select-Object -First 1
                        SqlInstance   = $db.Group.SqlInstance | Select-Object -First 1
                        Database      = $db.Name
                        AvgThroughput = [dbasize]([System.Math]::Round($measuremb.Average, 2) * 1024 * 1024)
                        AvgSize       = [dbasize]([System.Math]::Round($measuresize.Average, 2) * 1024 * 1024)
                        AvgDuration   = [dbatimespan](New-TimeSpan -Seconds $avgduration.Average)
                        MinThroughput = [dbasize]([System.Math]::Round($measuremb.Minimum, 2) * 1024 * 1024)
                        MaxThroughput = [dbasize]([System.Math]::Round($measuremb.Maximum, 2) * 1024 * 1024)
                        MinBackupDate = [dbadatetime]$measurestart.Minimum
                        MaxBackupDate = [dbadatetime]$measureend.Maximum
                        BackupCount   = $db.Count
                    } | Select-DefaultView -ExcludeProperty ComputerName, InstanceName
                }
            }
        }
    }
}

tools\dbatools\functions\Measure-DbaDiskSpaceRequirement.ps1

function Measure-DbaDiskSpaceRequirement {
    <#
    .SYNOPSIS
        Calculate the space needed to copy and possibly replace a database from one SQL server to another.

    .DESCRIPTION
        Returns a file list from source and destination where source file may overwrite destination. Complex scenarios where a new file may exist is taken into account.
        This command will accept a hash object in pipeline with the following keys: Source, SourceDatabase, Destination. Using this command will provide a way to prepare before a complex migration with multiple databases from different sources and destinations.

    .PARAMETER Source
        Source SQL Server.

    .PARAMETER SourceSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The database to copy. It MUST exist.

    .PARAMETER Destination
        Destination SQL Server instance.

    .PARAMETER DestinationSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER DestinationDatabase
        The database name at destination.
        May or may not be present, if unspecified it will default to the database name provided in SourceDatabase.

    .PARAMETER Credential
        The credentials to use to connect via CIM/WMI/PowerShell remoting.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Database, DiskSpace, Migration
        Author: Pollus Brodeur (@pollusb)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Measure-DbaDiskSpaceRequirement

    .EXAMPLE
        PS C:\> Measure-DbaDiskSpaceRequirement -Source INSTANCE1 -Database DB1 -Destination INSTANCE2

        Calculate space needed for a simple migration with one database with the same name at destination.

    .EXAMPLE
        PS C:\> @(
        >> [PSCustomObject]@{Source='SQL1';Destination='SQL2';Database='DB1'},
        >> [PSCustomObject]@{Source='SQL1';Destination='SQL2';Database='DB2'}
        >> ) | Measure-DbaDiskSpaceRequirement

        Using a PSCustomObject with 2 databases to migrate on SQL2.

    .EXAMPLE
        PS C:\> Import-Csv -Path .\migration.csv -Delimiter "`t" | Measure-DbaDiskSpaceRequirement | Format-Table -AutoSize

        Using a CSV file. You will need to use this header line "Source<tab>Destination<tab>Database<tab>DestinationDatabase".

    .EXAMPLE
        PS C:\> $qry = "SELECT Source, Destination, Database FROM dbo.Migrations"
        PS C:\> Invoke-DbaCmd -SqlInstance DBA -Database Migrations -Query $qry | Measure-DbaDiskSpaceRequirement

        Using a SQL table. We are DBA after all!

    #>
    [CmdletBinding()]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseOutputTypeCorrectly", "", Justification = "PSSA Rule Ignored by BOH")]
    param(
        [Parameter(Mandatory, ValueFromPipelineByPropertyName = $true)]
        [DbaInstanceParameter]$Source,
        [Parameter(Mandatory, ValueFromPipelineByPropertyName = $true)]
        [string]$Database,
        [Parameter(ValueFromPipelineByPropertyName = $true)]
        [PSCredential]$SourceSqlCredential,
        [Parameter(Mandatory, ValueFromPipelineByPropertyName = $true)]
        [DbaInstanceParameter]$Destination,
        [Parameter(ValueFromPipelineByPropertyName = $true)]
        [string]$DestinationDatabase,
        [Parameter(ValueFromPipelineByPropertyName = $true)]
        [PSCredential]$DestinationSqlCredential,
        [Parameter(ValueFromPipelineByPropertyName = $true)]
        [PSCredential]$Credential,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {
        $local:cacheMP = @{}
        $local:cacheDP = @{}
        function Get-MountPoint {
            [CmdletBinding()]
            param(
                [Parameter(Mandatory)]
                $computerName,
                [PSCredential]$credential
            )
            Get-DbaCmObject -Class Win32_MountPoint -ComputerName $computerName -Credential $credential |
                Select-Object @{n = 'Mountpoint'; e = {$_.Directory.split('=')[1].Replace('"', '').Replace('\\', '\')}}
        }
        function Get-MountPointFromPath {
            [CmdletBinding()]
            param(
                [Parameter(Mandatory)]
                $path,
                [Parameter(Mandatory)]
                $computerName,
                [PSCredential]$credential
            )
            if (!$cacheMP[$computerName]) {
                try {
                    $cacheMP.Add($computerName, (Get-MountPoint -computerName $computerName -credential $credential))
                    Write-Message -Level Verbose -Message "cacheMP[$computerName] is now cached"
                } catch {
                    # This way, I won't be asking again for this computer.
                    $cacheMP.Add($computerName, '?')
                    Stop-Function -Message "Can't connect to $computerName. cacheMP[$computerName] = ?" -ErrorRecord $_ -Target $computerName -Continue
                }
            }
            if ($cacheMP[$computerName] -eq '?') {
                return '?'
            }
            foreach ($m in ($cacheMP[$computerName] | Sort-Object -Property Mountpoint -Descending)) {
                if ($path -like "$($m.Mountpoint)*") {
                    return $m.Mountpoint
                }
            }
            Write-Message -Level Warning -Message "Path $path can't be found in any MountPoints of $computerName"
        }
        function Get-MountPointFromDefaultPath {
            [CmdletBinding()]
            param(
                [Parameter(Mandatory)]
                [ValidateSet('Log', 'Data')]
                $DefaultPathType,
                [Parameter(Mandatory)]
                $SqlInstance,
                [PSCredential]$SqlCredential,
                # Could probably use the computer defined in SqlInstance but info was already available from the caller
                $computerName,
                [PSCredential]$Credential
            )
            if (!$cacheDP[$SqlInstance]) {
                try {
                    $cacheDP.Add($SqlInstance, (Get-DbaDefaultPath -SqlInstance $SqlInstance -SqlCredential $SqlCredential -EnableException))
                    Write-Message -Level Verbose -Message "cacheDP[$SqlInstance] is now cached"
                } catch {
                    Stop-Function -Message "Can't connect to $SqlInstance" -Continue
                    $cacheDP.Add($SqlInstance, '?')
                    return '?'
                }
            }
            if ($cacheDP[$SqlInstance] -eq '?') {
                return '?'
            }
            if (!$computerName) {
                $computerName = $cacheDP[$SqlInstance].ComputerName
            }
            if (!$cacheMP[$computerName]) {
                try {
                    $cacheMP.Add($computerName, (Get-MountPoint -computerName $computerName -Credential $Credential))
                } catch {
                    Stop-Function -Message "Can't connect to $computerName." -Continue
                    $cacheMP.Add($computerName, '?')
                    return '?'
                }
            }
            if ($DefaultPathType -eq 'Log') {
                $path = $cacheDP[$SqlInstance].Log
            } else {
                $path = $cacheDP[$SqlInstance].Data
            }
            foreach ($m in ($cacheMP[$computerName] | Sort-Object -Property Mountpoint -Descending)) {
                if ($path -like "$($m.Mountpoint)*") {
                    return $m.Mountpoint
                }
            }
        }
    }
    process {
        try {
            $sourceServer = Connect-SqlInstance -SqlInstance $Source -SqlCredential $SourceSqlCredential
        } catch {
            Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $Source
        }

        try {
            $destServer = Connect-SqlInstance -SqlInstance $Destination -SqlCredential $DestinationSqlCredential
        } catch {
            Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $Destination
        }

        if (Test-Bound 'DestinationDatabase' -not) {
            $DestinationDatabase = $Database
        }
        Write-Message -Level Verbose -Message "$Source.[$Database] -> $Destination.[$DestinationDatabase]"

        $sourceDb = Get-DbaDatabase -SqlInstance $sourceServer -Database $Database -SqlCredential $SourceSqlCredential
        if (Test-Bound 'Database' -not) {
            Stop-Function -Message "Database [$Database] MUST exist on Source Instance $Source." -ErrorRecord $_
        }
        $sourceFiles = @($sourceDb.FileGroups.Files | Select-Object Name, FileName, Size, @{n = 'Type'; e = {'Data'}})
        $sourceFiles += @($sourceDb.LogFiles        | Select-Object Name, FileName, Size, @{n = 'Type'; e = {'Log'}})

        if ($destDb = Get-DbaDatabase -SqlInstance $destServer -Database $DestinationDatabase -SqlCredential $DestinationSqlCredential) {
            $destFiles = @($destDb.FileGroups.Files | Select-Object Name, FileName, Size, @{n = 'Type'; e = {'Data'}})
            $destFiles += @($destDb.LogFiles        | Select-Object Name, FileName, Size, @{n = 'Type'; e = {'Log'}})
            $computerName = $destDb.ComputerName
        } else {
            Write-Message -Level Verbose -Message "Database [$DestinationDatabase] does not exist on Destination Instance $Destination."
            $computerName = $destServer.ComputerName
        }

        foreach ($sourceFile in $sourceFiles) {
            foreach ($destFile in $destFiles) {
                if (($found = ($sourceFile.Name -eq $destFile.Name))) {
                    # Files found on both sides
                    [PSCustomObject]@{
                        SourceComputerName      = $sourceServer.ComputerName
                        SourceInstance          = $sourceServer.ServiceName
                        SourceSqlInstance       = $sourceServer.DomainInstanceName
                        DestinationComputerName = $destServer.ComputerName
                        DestinationInstance     = $destServer.ServiceName
                        DestinationSqlInstance  = $destServer.DomainInstanceName
                        SourceDatabase          = $sourceDb.Name
                        SourceLogicalName       = $sourceFile.Name
                        SourceFileName          = $sourceFile.FileName
                        SourceFileSize          = [DbaSize]($sourceFile.Size * 1000)
                        DestinationDatabase     = $destDb.Name
                        DestinationLogicalName  = $destFile.Name
                        DestinationFileName     = $destFile.FileName
                        DestinationFileSize     = [DbaSize]($destFile.Size * 1000) * -1
                        DifferenceSize          = [DbaSize]( ($sourceFile.Size * 1000) - ($destFile.Size * 1000) )
                        MountPoint              = Get-MountPointFromPath -Path $destFile.Filename -ComputerName $computerName -Credential $Credential
                        FileLocation            = 'Source and Destination'
                    } | Select-DefaultView -ExcludeProperty SourceComputerName, SourceInstance, DestinationInstance, DestinationLogicalName
                    break
                }
            }
            if (!$found) {
                # Files on source but not on destination
                [PSCustomObject]@{
                    SourceComputerName      = $sourceServer.ComputerName
                    SourceInstance          = $sourceServer.ServiceName
                    SourceSqlInstance       = $sourceServer.DomainInstanceName
                    DestinationComputerName = $destServer.ComputerName
                    DestinationInstance     = $destServer.ServiceName
                    DestinationSqlInstance  = $destServer.DomainInstanceName
                    SourceDatabase          = $sourceDb.Name
                    SourceLogicalName       = $sourceFile.Name
                    SourceFileName          = $sourceFile.FileName
                    SourceFileSize          = [DbaSize]($sourceFile.Size * 1000)
                    DestinationDatabase     = $DestinationDatabase
                    DestinationLogicalName  = $null
                    DestinationFileName     = $null
                    DestinationFileSize     = [DbaSize]0
                    DifferenceSize          = [DbaSize]($sourceFile.Size * 1000)
                    MountPoint              = Get-MountPointFromDefaultPath -DefaultPathType $sourceFile.Type -SqlInstance $Destination `
                        -SqlCredential $DestinationSqlCredential -computerName $computerName -credential $Credential
                    FileLocation            = 'Only on Source'
                } | Select-DefaultView -ExcludeProperty SourceComputerName, SourceInstance, DestinationInstance, DestinationLogicalName
            }
        }
        if ($destDb) {
            # Files on destination but not on source (strange scenario but possible)
            $destFilesNotSource = Compare-Object -ReferenceObject $destFiles -DifferenceObject $sourceFiles -Property Name -PassThru
            foreach ($destFileNotSource in $destFilesNotSource) {
                [PSCustomObject]@{
                    SourceComputerName      = $sourceServer.ComputerName
                    SourceInstance          = $sourceServer.ServiceName
                    SourceSqlInstance       = $sourceServer.DomainInstanceName
                    DestinationComputerName = $destServer.ComputerName
                    DestinationInstance     = $destServer.ServiceName
                    DestinationSqlInstance  = $destServer.DomainInstanceName
                    SourceDatabaseName      = $Database
                    SourceLogicalName       = $null
                    SourceFileName          = $null
                    SourceFileSize          = [DbaSize]0
                    DestinationDatabaseName = $destDb.Name
                    DestinationLogicalName  = $destFileNotSource.Name
                    DestinationFileName     = $destFile.FileName
                    DestinationFileSize     = [DbaSize]($destFileNotSource.Size * 1000) * -1
                    DifferenceSize          = [DbaSize]($destFileNotSource.Size * 1000) * -1
                    MountPoint              = Get-MountPointFromPath -Path $destFileNotSource.Filename -ComputerName $computerName -Credential $Credential
                    FileLocation            = 'Only on Destination'
                } | Select-DefaultView -ExcludeProperty SourceComputerName, SourceInstance, DestinationInstance, DestinationLogicalName
            }
        }
        $DestinationDatabase = $null
    }
}

tools\dbatools\functions\Measure-DbatoolsImport.ps1

function Measure-DbatoolsImport {
    <#
    .SYNOPSIS
        Displays the import load times of the dbatools PowerShell module

    .DESCRIPTION
        Displays the import load times of the dbatools PowerShell module

    .NOTES
        Tags: Debug
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Measure-DbatoolsImport

    .EXAMPLE
        PS C:\> Measure-DbatoolsImport
        Displays the import load times of the dbatools PowerShell module

    .EXAMPLE
        PS C:\> Import-Module dbatools
        PS C:\> Measure-DbatoolsImport

        Displays the import load times of the dbatools PowerShell module

    #>
    [Sqlcollaborative.Dbatools.dbaSystem.DebugHost]::ImportTime
}

tools\dbatools\functions\Mount-DbaDatabase.ps1

function Mount-DbaDatabase {
    <#
    .SYNOPSIS
        Attach a SQL Server Database - aliased to Attach-DbaDatabase

    .DESCRIPTION
        This command will attach a SQL Server database.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The database(s) to attach.

    .PARAMETER FileStructure
        A StringCollection object value that contains a list database files. If FileStructure is not specified, BackupHistory will be used to guess the structure.

    .PARAMETER DatabaseOwner
        Sets the database owner for the database. The sa account (or equivalent) will be used if DatabaseOwner is not specified.

    .PARAMETER AttachOption
        An AttachOptions object value that contains the attachment options. Valid options are "None", "RebuildLog", "EnableBroker", "NewBroker" and "ErrorBrokerConversations".

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Database
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Mount-DbaDatabase

    .EXAMPLE
        PS C:\> $fileStructure = New-Object System.Collections.Specialized.StringCollection
        PS C:\> $fileStructure.Add("E:\archive\example.mdf")
        PS C:\> $filestructure.Add("E:\archive\example.ldf")
        PS C:\> $filestructure.Add("E:\archive\example.ndf")
        PS C:\> Mount-DbaDatabase -SqlInstance sql2016 -Database example -FileStructure $fileStructure

        Attaches a database named "example" to sql2016 with the files "E:\archive\example.mdf", "E:\archive\example.ldf" and "E:\archive\example.ndf". The database owner will be set to sa and the attach option is None.

    .EXAMPLE
        PS C:\> Mount-DbaDatabase -SqlInstance sql2016 -Database example

        Since the FileStructure was not provided, this command will attempt to determine it based on backup history. If found, a database named example will be attached to sql2016.

    .EXAMPLE
        PS C:\> Mount-DbaDatabase -SqlInstance sql2016 -Database example -WhatIf

        Shows what would happen if the command were executed (without actually performing the command)

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]
        $SqlCredential,
        [parameter(Mandatory)]
        [string[]]$Database,
        [System.Collections.Specialized.StringCollection]$FileStructure,
        [string]$DatabaseOwner,
        [ValidateSet('None', 'RebuildLog', 'EnableBroker', 'NewBroker', 'ErrorBrokerConversations')]
        [string]$AttachOption = "None",
        [Alias('Silent')]
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            if (-not $server.Logins.Item($DatabaseOwner)) {
                try {
                    $DatabaseOwner = ($server.Logins | Where-Object { $_.id -eq 1 }).Name
                } catch {
                    $DatabaseOwner = "sa"
                }
            }

            foreach ($db in $database) {

                if ($server.Databases[$db]) {
                    Stop-Function -Message "$db is already attached to $server." -Target $db -Continue
                }

                if ($server.Databases[$db].IsSystemObject) {
                    Stop-Function -Message "$db is a system database and cannot be attached using this method." -Target $db -Continue
                }

                if (-Not (Test-Bound -Parameter FileStructure)) {
                    $backuphistory = Get-DbaBackupHistory -SqlInstance $server -Database $db -Type Full | Sort-Object End -Descending | Select-Object -First 1

                    if (-not $backuphistory) {
                        $message = "Could not enumerate backup history to automatically build FileStructure. Rerun the command and provide the filestructure parameter."
                        Stop-Function -Message $message -Target $db -Continue
                    }

                    $backupfile = $backuphistory.Path[0]
                    $filepaths = (Read-DbaBackupHeader -SqlInstance $server -FileList -Path $backupfile).PhysicalName

                    $FileStructure = New-Object System.Collections.Specialized.StringCollection
                    foreach ($file in $filepaths) {
                        $exists = Test-Dbapath -SqlInstance $server -Path $file
                        if (-not $exists) {
                            $message = "Could not find the files to build the FileStructure. Rerun the command and provide the FileStructure parameter."
                            Stop-Function -Message $message -Target $file -Continue
                        }

                        $null = $FileStructure.Add($file)
                    }
                }

                If ($Pscmdlet.ShouldProcess($server, "Attaching $Database with $DatabaseOwner as database owner and $AttachOption as attachoption")) {
                    try {
                        $server.AttachDatabase($db, $FileStructure, $DatabaseOwner, [Microsoft.SqlServer.Management.Smo.AttachOptions]::$AttachOption)

                        [pscustomobject]@{
                            ComputerName  = $server.ComputerName
                            InstanceName  = $server.ServiceName
                            SqlInstance   = $server.DomainInstanceName
                            Database      = $db
                            AttachResult  = "Success"
                            AttachOption  = $AttachOption
                            FileStructure = $FileStructure
                        }
                    } catch {
                        Stop-Function -Message "Failure" -ErrorRecord $_ -Target $server
                    }
                }
            }
        }
    }
}

tools\dbatools\functions\Move-DbaCmsRegServer.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Move-DbaCmsRegServer {
    <#
    .SYNOPSIS
        Moves registered servers around SQL Server Central Management Server (CMS)

    .DESCRIPTION
        Moves registered servers around SQL Server Central Management Server (CMS)

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Name
        Specifies one or more reg servers to move. Name is the visible name in SSMS CMS interface (labeled Registered Server Name)

    .PARAMETER ServerName
        Specifies one or more reg servers to move. Server Name is the actual instance name (labeled Server Name)

    .PARAMETER NewGroup
        The new group. If no new group is specified, the default root will used

    .PARAMETER InputObject
        Allows results from Get-DbaCmsRegServer to be piped in

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.

        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.

        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: RegisteredServer, CMS
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Move-DbaCmsRegServer

    .EXAMPLE
        PS C:\> Move-DbaCmsRegServer -SqlInstance sql2012 -Name 'Web SQL Cluster' -NewGroup HR\Prod

        Moves the registered server on sql2012 titled 'Web SQL Cluster' to the Prod group within the HR group

    .EXAMPLE
        PS C:\> Get-DbaCmsRegServer -SqlInstance sql2017 -Name 'Web SQL Cluster' | Move-DbaCmsRegServer -NewGroup Web

        Moves the registered server 'Web SQL Cluster' on sql2017 to the Web group, also on sql2017

    #>

    [CmdletBinding(SupportsShouldProcess)]
    param (
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$Name,
        [string[]]$ServerName,
        [string]$NewGroup,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.RegisteredServers.RegisteredServer[]]$InputObject,
        [switch]$EnableException
    )

    begin {
        if ((Test-Bound -ParameterName SqlInstance) -and (Test-Bound -Not -ParameterName Name) -and (Test-Bound -Not -ParameterName ServerName)) {
            Stop-Function -Message "Name or ServerName must be specified when using -SqlInstance"
        }
    }
    process {
        if (Test-FunctionInterrupt) { return }

        foreach ($instance in $SqlInstance) {
            $InputObject += Get-DbaCmsRegServer -SqlInstance $instance -SqlCredential $SqlCredential -Name $Name -ServerName $ServerName

        }

        foreach ($regserver in $InputObject) {
            $parentserver = Get-RegServerParent -InputObject $regserver

            if ($null -eq $parentserver) {
                Stop-Function -Message "Something went wrong and it's hard to explain, sorry. This basically shouldn't happen." -Continue
            }

            $server = $parentserver.ServerConnection.SqlConnectionObject

            if ((Test-Bound -ParameterName NewGroup)) {
                $group = Get-DbaCmsRegServerGroup -SqlInstance $server -Group $NewGroup

                if (-not $group) {
                    Stop-Function -Message "$NewGroup not found on $server" -Continue
                }
            } else {
                $group = Get-DbaCmsRegServerGroup -SqlInstance $server -Id 1
            }

            if ($Pscmdlet.ShouldProcess($regserver.SqlInstance, "Moving $($regserver.Name) to $group")) {
                try {
                    $null = $parentserver.ServerConnection.ExecuteNonQuery($regserver.ScriptMove($group).GetScript())
                    Get-DbaCmsRegServer -SqlInstance $server -Name $regserver.Name -ServerName $regserver.ServerName
                    $parentserver.ServerConnection.Disconnect()
                } catch {
                    Stop-Function -Message "Failed to move $($regserver.Name) to $NewGroup on $($regserver.SqlInstance)" -ErrorRecord $_ -Continue
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias Move-DbaRegisteredServer
    }
}

tools\dbatools\functions\Move-DbaCmsRegServerGroup.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Move-DbaCmsRegServerGroup {
    <#
    .SYNOPSIS
        Moves registered server groups around SQL Server Central Management Server (CMS).

    .DESCRIPTION
        Moves registered server groups around SQL Server Central Management Server (CMS).

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Group
        Specifies one or more groups to include from SQL Server Central Management Server.

    .PARAMETER NewGroup
        The new location.

    .PARAMETER InputObject
        Allows results from Get-DbaCmsRegServerGroup to be piped in

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.

        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.

        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: RegisteredServer, CMS
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Move-DbaCmsRegServerGroup

    .EXAMPLE
        PS C:\> Move-DbaCmsRegServerGroup -SqlInstance sql2012 -Group HR\Development -NewGroup AD\Prod

        Moves the Development group within HR to the Prod group within AD

    .EXAMPLE
        PS C:\> Get-DbaCmsRegServerGroup -SqlInstance sql2017 -Group HR\Development| Move-DbaCmsRegServer -NewGroup Web

        Moves the Development group within HR to the Web group

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$Group,
        [parameter(Mandatory)]
        [string]$NewGroup,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.RegisteredServers.ServerGroup[]]$InputObject,
        [switch]$EnableException
    )
    begin {
        if ((Test-Bound -ParameterName SqlInstance) -and (Test-Bound -Not -ParameterName Group)) {
            Stop-Function -Message "Group must be specified when using -SqlInstance"
        }
    }
    process {
        if (Test-FunctionInterrupt) { return }

        foreach ($instance in $SqlInstance) {
            $InputObject += Get-DbaCmsRegServerGroup -SqlInstance $instance -SqlCredential $SqlCredential -Group $Group
        }

        foreach ($regservergroup in $InputObject) {
            $parentserver = Get-RegServerParent -InputObject $regservergroup

            if ($null -eq $parentserver) {
                Stop-Function -Message "Something went wrong and it's hard to explain, sorry. This basically shouldn't happen." -Continue
            }

            $server = $parentserver.ServerConnection.SqlConnectionObject

            if ($NewGroup -eq 'Default') {
                $groupobject = Get-DbaCmsRegServerGroup -SqlInstance $server -Id 1
            } else {
                $groupobject = Get-DbaCmsRegServerGroup -SqlInstance $server -Group $NewGroup
            }

            Write-Message -Level Verbose -Message "Found $($groupobject.Name) on $($parentserver.ServerConnection.ServerName)"

            if (-not $groupobject) {
                Stop-Function -Message "Group '$NewGroup' not found on $server" -Continue
            }

            if ($Pscmdlet.ShouldProcess($regservergroup.SqlInstance, "Moving $($regservergroup.Name) to $($groupobject.Name)")) {
                try {
                    Write-Message -Level Verbose -Message "Parsing $groupobject"
                    $newname = Get-RegServerGroupReverseParse $groupobject
                    $newname = "$newname\$($regservergroup.Name)"
                    Write-Message -Level Verbose -Message "Executing $($regservergroup.ScriptMove($groupobject).GetScript())"
                    $null = $parentserver.ServerConnection.ExecuteNonQuery($regservergroup.ScriptMove($groupobject).GetScript())
                    Get-DbaCmsRegServerGroup -SqlInstance $server -Group $newname
                    $parentserver.ServerConnection.Disconnect()
                } catch {
                    Stop-Function -Message "Failed to move $($regserver.Name) to $NewGroup on $($regserver.SqlInstance)" -ErrorRecord $_ -Continue
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias Move-DbaRegisteredServerGroup
    }
}

tools\dbatools\functions\New-DbaAgentJob.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function New-DbaAgentJob {
    <#
    .SYNOPSIS
        New-DbaAgentJob creates a new job

    .DESCRIPTION
        New-DbaAgentJob makes is possible to create a job in the SQL Server Agent.
        It returns an array of the job(s) created

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2000 or greater.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Job
        The name of the job. The name must be unique and cannot contain the percent (%) character.

    .PARAMETER Schedule
        Schedule to attach to job. This can be more than one schedule.

    .PARAMETER ScheduleId
        Schedule ID to attach to job. This can be more than one schedule ID.

    .PARAMETER Disabled
        Sets the status of the job to disabled. By default a job is enabled.

    .PARAMETER Description
        The description of the job.

    .PARAMETER StartStepId
        The identification number of the first step to execute for the job.

    .PARAMETER Category
        The category of the job.

    .PARAMETER OwnerLogin
        The name of the login that owns the job.

    .PARAMETER EventLogLevel
        Specifies when to place an entry in the Microsoft Windows application log for this job.
        Allowed values 0, "Never", 1, "OnSuccess", 2, "OnFailure", 3, "Always"
        The text value can either be lowercase, uppercase or something in between as long as the text is correct.

    .PARAMETER EmailLevel
        Specifies when to send an e-mail upon the completion of this job.
        Allowed values 0, "Never", 1, "OnSuccess", 2, "OnFailure", 3, "Always"
        The text value can either be lowercase, uppercase or something in between as long as the text is correct.

    .PARAMETER NetsendLevel
        Specifies when to send a network message upon the completion of this job.
        Allowed values 0, "Never", 1, "OnSuccess", 2, "OnFailure", 3, "Always"
        The text value can either be lowercase, uppercase or something in between as long as the text is correct.

    .PARAMETER PageLevel
        Specifies when to send a page upon the completion of this job.
        Allowed values 0, "Never", 1, "OnSuccess", 2, "OnFailure", 3, "Always"
        The text value can either be lowercase, uppercase or something in between as long as the text is correct.

    .PARAMETER EmailOperator
        The e-mail name of the operator to whom the e-mail is sent when EmailLevel is reached.

    .PARAMETER NetsendOperator
        The name of the operator to whom the network message is sent.

    .PARAMETER PageOperator
        The name of the operator to whom a page is sent.

    .PARAMETER DeleteLevel
        Specifies when to delete the job.
        Allowed values 0, "Never", 1, "OnSuccess", 2, "OnFailure", 3, "Always"
        The text value can either be lowercase, uppercase or something in between as long as the text is correct.

    .PARAMETER Force
        The force parameter will ignore some errors in the parameters and assume defaults.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Agent, Job, JobStep
        Author: Sander Stad (@sqlstad), sqlstad.nl

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/New-DbaAgentJob

    .EXAMPLE
        PS C:\> New-DbaAgentJob -SqlInstance sql1 -Job 'Job One' -Description 'Just another job'

        Creates a job with the name "Job1" and a small description

    .EXAMPLE
        PS C:\> New-DbaAgentJob -SqlInstance sql1 -Job 'Job One' -Disabled

        Creates the job but sets it to disabled

    .EXAMPLE
        PS C:\> New-DbaAgentJob -SqlInstance sql1 -Job 'Job One' -EventLogLevel OnSuccess

        Creates the job and sets the notification to write to the Windows Application event log on success

    .EXAMPLE
        PS C:\> New-DbaAgentJob -SqlInstance SSTAD-PC -Job 'Job One' -EmailLevel OnFailure -EmailOperator dba

        Creates the job and sets the notification to send an e-mail to the e-mail operator

    .EXAMPLE
        PS C:\> New-DbaAgentJob -SqlInstance sql1 -Job 'Job One' -Description 'Just another job' -Whatif

        Doesn't create the job but shows what would happen.

    .EXAMPLE
        PS C:\> New-DbaAgentJob -SqlInstance sql1, sql2, sql3 -Job 'Job One'

        Creates a job with the name "Job One" on multiple servers

    .EXAMPLE
        PS C:\> "sql1", "sql2", "sql3" | New-DbaAgentJob -Job 'Job One'

        Creates a job with the name "Job One" on multiple servers using the pipe line

    #>

    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "Low")]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [string]$Job,
        [object[]]$Schedule,
        [int[]]$ScheduleId,
        [switch]$Disabled,
        [string]$Description,
        [int]$StartStepId,
        [string]$Category,
        [string]$OwnerLogin,
        [ValidateSet(0, "Never", 1, "OnSuccess", 2, "OnFailure", 3, "Always")]
        [object]$EventLogLevel,
        [ValidateSet(0, "Never", 1, "OnSuccess", 2, "OnFailure", 3, "Always")]
        [object]$EmailLevel,
        [ValidateSet(0, "Never", 1, "OnSuccess", 2, "OnFailure", 3, "Always")]
        [Parameter()]
        [ValidateSet(0, "Never", 1, "OnSuccess", 2, "OnFailure", 3, "Always")]
        [object]$PageLevel,
        [string]$EmailOperator,
        [string]$NetsendOperator,
        [string]$PageOperator,
        [ValidateSet(0, "Never", 1, "OnSuccess", 2, "OnFailure", 3, "Always")]
        [object]$DeleteLevel,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {

        # Check of the event log level is of type string and set the integer value
        if ($EventLogLevel -notin 1, 2, 3) {
            $EventLogLevel = switch ($EventLogLevel) {
                "Never" { 0 } "OnSuccess" { 1 } "OnFailure" { 2 } "Always" { 3 }
                default { 0 }
            }
        }

        # Check of the email level is of type string and set the integer value
        if ($EmailLevel -notin 1, 2, 3) {
            $EmailLevel = switch ($EmailLevel) {
                "Never" { 0 } "OnSuccess" { 1 } "OnFailure" { 2 } "Always" { 3 }
                default { 0 }
            }
        }

        # Check of the net send level is of type string and set the integer value
        if ($NetsendLevel -notin 1, 2, 3) {
            $NetsendLevel = switch ($NetsendLevel) {
                "Never" { 0 } "OnSuccess" { 1 } "OnFailure" { 2 } "Always" { 3 }
                default { 0 }
            }
        }

        # Check of the page level is of type string and set the integer value
        if ($PageLevel -notin 1, 2, 3) {
            $PageLevel = switch ($PageLevel) {
                "Never" { 0 } "OnSuccess" { 1 } "OnFailure" { 2 } "Always" { 3 }
                default { 0 }
            }
        }

        # Check of the delete level is of type string and set the integer value
        if ($DeleteLevel -notin 1, 2, 3) {
            $DeleteLevel = switch ($DeleteLevel) {
                "Never" { 0 } "OnSuccess" { 1 } "OnFailure" { 2 } "Always" { 3 }
                default { 0 }
            }
        }

        # Check the e-mail operator name
        if (($EmailLevel -ge 1) -and (-not $EmailOperator)) {
            Stop-Function -Message "Please set the e-mail operator when the e-mail level parameter is set." -Target $sqlinstance
            return
        }

        # Check the e-mail operator name
        if (($NetsendLevel -ge 1) -and (-not $NetsendOperator)) {
            Stop-Function -Message "Please set the netsend operator when the netsend level parameter is set." -Target $sqlinstance
            return
        }

        # Check the e-mail operator name
        if (($PageLevel -ge 1) -and (-not $PageOperator)) {
            Stop-Function -Message "Please set the page operator when the page level parameter is set." -Target $sqlinstance
            return
        }
    }

    process {

        if (Test-FunctionInterrupt) { return }

        foreach ($instance in $sqlinstance) {
            # Try connecting to the instance
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            # Check if the job already exists
            if (-not $Force -and ($server.JobServer.Jobs.Name -contains $Job)) {
                Stop-Function -Message "Job $Job already exists on $instance" -Target $instance -Continue
            } elseif ($Force -and ($server.JobServer.Jobs.Name -contains $Job)) {
                Write-Message -Message "Job $Job already exists on $instance. Removing.." -Level Verbose

                if ($PSCmdlet.ShouldProcess($instance, "Removing the job $Job on $instance")) {
                    try {
                        Remove-DbaAgentJob -SqlInstance $instance -Job $Job -EnableException
                    } catch {
                        Stop-Function -Message "Couldn't remove job $Job from $instance" -Target $instance -Continue -ErrorRecord $_
                    }
                }

            }

            if ($PSCmdlet.ShouldProcess($instance, "Creating the job on $instance")) {
                # Create the job object
                try {
                    $currentjob = New-Object Microsoft.SqlServer.Management.Smo.Agent.Job($server.JobServer, $Job)
                } catch {
                    Stop-Function -Message "Something went wrong creating the job. `n" -Target $Job -Continue -ErrorRecord $_
                }

                #region job options
                # Settings the options for the job
                if ($Disabled) {
                    Write-Message -Message "Setting job to disabled" -Level Verbose
                    $currentjob.IsEnabled = $false
                } else {
                    Write-Message -Message "Setting job to enabled" -Level Verbose
                    $currentjob.IsEnabled = $true
                }

                if ($Description.Length -ge 1) {
                    Write-Message -Message "Setting job description" -Level Verbose
                    $currentjob.Description = $Description
                }

                if ($StartStepId -ge 1) {
                    Write-Message -Message "Setting job start step id" -Level Verbose
                    $currentjob.StartStepID = $StartStepId
                }

                if ($Category.Length -ge 1) {
                    # Check if the job category exists
                    if ($Category -notin $server.JobServer.JobCategories.Name) {
                        if ($Force) {
                            if ($PSCmdlet.ShouldProcess($instance, "Creating job category on $instance")) {
                                try {
                                    # Create the category
                                    New-DbaAgentJobCategory -SqlInstance $instance -Category $Category
                                } catch {
                                    Stop-Function -Message "Couldn't create job category $Category from $instance" -Target $instance -Continue -ErrorRecord $_
                                }
                            }
                        } else {
                            Stop-Function -Message "Job category $Category doesn't exist on $instance. Use -Force to create it." -Target $instance
                            return
                        }
                    } else {
                        Write-Message -Message "Setting job category" -Level Verbose
                        $currentjob.Category = $Category
                    }
                }

                if ($OwnerLogin.Length -ge 1) {
                    # Check if the login name is present on the instance
                    if ($server.Logins.Name -contains $OwnerLogin) {
                        Write-Message -Message "Setting job owner login name to $OwnerLogin" -Level Verbose
                        $currentjob.OwnerLoginName = $OwnerLogin
                    } else {
                        Stop-Function -Message "The owner $OwnerLogin does not exist on instance $instance" -Target $Job -Continue
                    }
                }

                if ($EventLogLevel -ge 0) {
                    Write-Message -Message "Setting job event log level" -Level Verbose
                    $currentjob.EventLogLevel = $EventLogLevel
                }

                if ($EmailOperator) {
                    if ($EmailLevel -ge 1) {
                        # Check if the operator name is present
                        if ($server.JobServer.Operators.Name -contains $EmailOperator) {
                            Write-Message -Message "Setting job e-mail level" -Level Verbose
                            $currentjob.EmailLevel = $EmailLevel

                            Write-Message -Message "Setting job e-mail operator" -Level Verbose
                            $currentjob.OperatorToEmail = $EmailOperator
                        } else {
                            Stop-Function -Message "The e-mail operator name $EmailOperator does not exist on instance $instance. Exiting.." -Target $Job -Continue
                        }
                    } else {
                        Stop-Function -Message "Invalid combination of e-mail operator name $EmailOperator and email level $EmailLevel. Not setting the notification." -Target $Job -Continue
                    }
                }

                if ($NetsendOperator) {
                    if ($NetsendLevel -ge 1) {
                        # Check if the operator name is present
                        if ($server.JobServer.Operators.Name -contains $NetsendOperator) {
                            Write-Message -Message "Setting job netsend level" -Level Verbose
                            $currentjob.NetSendLevel = $NetsendLevel

                            Write-Message -Message "Setting job netsend operator" -Level Verbose
                            $currentjob.OperatorToNetSend = $NetsendOperator
                        } else {
                            Stop-Function -Message "The netsend operator name $NetsendOperator does not exist on instance $instance. Exiting.." -Target $Job -Continue
                        }
                    } else {
                        Write-Message -Message "Invalid combination of netsend operator name $NetsendOperator and netsend level $NetsendLevel. Not setting the notification."
                    }
                }

                if ($PageOperator) {
                    if ($PageLevel -ge 1) {
                        # Check if the operator name is present
                        if ($server.JobServer.Operators.Name -contains $PageOperator) {
                            Write-Message -Message "Setting job pager level" -Level Verbose
                            $currentjob.PageLevel = $PageLevel

                            Write-Message -Message "Setting job pager operator" -Level Verbose
                            $currentjob.OperatorToPage = $PageOperator
                        } else {
                            Stop-Function -Message "The page operator name $PageOperator does not exist on instance $instance. Exiting.." -Target $Job -Continue
                        }
                    } else {
                        Write-Message -Message "Invalid combination of page operator name $PageOperator and page level $PageLevel. Not setting the notification." -Level Warning
                    }
                }

                if ($DeleteLevel -ge 0) {
                    Write-Message -Message "Setting job delete level" -Level Verbose
                    $currentjob.DeleteLevel = $DeleteLevel
                }
                #endregion job options

                try {
                    Write-Message -Message "Creating the job" -Level Verbose

                    # Create the job
                    $currentjob.Create()

                    Write-Message -Message "Job created with UID $($currentjob.JobID)" -Level Verbose

                    # Make sure the target is set for the job
                    Write-Message -Message "Applying the target (local) to job $Job" -Level Verbose
                    $currentjob.ApplyToTargetServer("(local)")

                    # If a schedule needs to be attached
                    if ($Schedule) {
                        Set-DbaAgentJob -SqlInstance $instance -Job $currentjob -Schedule $Schedule -SqlCredential $SqlCredential
                    }

                    if ($ScheduleId) {
                        Set-DbaAgentJob -SqlInstance $instance -Job $currentjob -ScheduleId $ScheduleId -SqlCredential $SqlCredential
                    }
                } catch {
                    Stop-Function -Message "Something went wrong creating the job" -Target $currentjob -ErrorRecord $_ -Continue
                }
            }

            # Return the job
            return $currentjob
        }
    }

    end {
        if (Test-FunctionInterrupt) { return }
        Write-Message -Message "Finished creating job(s)." -Level Verbose
    }

}

tools\dbatools\functions\New-DbaAgentJobCategory.ps1

function New-DbaAgentJobCategory {
    <#
    .SYNOPSIS
        New-DbaAgentJobCategory creates a new job category.

    .DESCRIPTION
        New-DbaAgentJobCategory makes it possible to create a job category that can be used with jobs.
        It returns an array of the job(s) created .

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2000 or greater.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Category
        The name of the category

    .PARAMETER CategoryType
        The type of category. This can be "LocalJob", "MultiServerJob" or "None".
        The default is "LocalJob" and will automatically be set when no option is chosen.

    .PARAMETER Force
        The force parameter will ignore some errors in the parameters and assume defaults.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Agent, Job, JobCategory
        Author: Sander Stad (@sqlstad), sqlstad.nl

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/New-DbaAgentJobCategory

    .EXAMPLE
        PS C:\> New-DbaAgentJobCategory -SqlInstance sql1 -Category 'Category 1'

        Creates a new job category with the name 'Category 1'.

    .EXAMPLE
        PS C:\> New-DbaAgentJobCategory -SqlInstance sql1 -Category 'Category 2' -CategoryType MultiServerJob

        Creates a new job category with the name 'Category 2' and assign the category type for a multi server job.

    #>

    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "Low")]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [string[]]$Category,
        [ValidateSet("LocalJob", "MultiServerJob", "None")]
        [string]$CategoryType,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        # Check the category type
        if (-not $CategoryType) {
            # Setting category type to default
            Write-Message -Message "Setting the category type to 'LocalJob'" -Level Verbose
            $CategoryType = "LocalJob"
        }
    }

    process {

        foreach ($instance in $sqlinstance) {
            # Try connecting to the instance
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            foreach ($cat in $Category) {
                # Check if the category already exists
                if ($cat -in $server.JobServer.JobCategories.Name) {
                    Stop-Function -Message "Job category $cat already exists on $instance" -Target $instance -Continue
                } else {
                    if ($PSCmdlet.ShouldProcess($instance, "Adding the job category $cat")) {
                        try {
                            $jobcategory = New-Object Microsoft.SqlServer.Management.Smo.Agent.JobCategory($server.JobServer, $cat)
                            $jobcategory.CategoryType = $CategoryType

                            $jobcategory.Create()

                            $server.JobServer.Refresh()
                        } catch {
                            Stop-Function -Message "Something went wrong creating the job category $cat on $instance" -Target $cat -Continue -ErrorRecord $_
                        }

                    } # if should process

                } # end else category exists

                # Return the job category
                Get-DbaAgentJobCategory -SqlInstance $instance -Category $cat

            } # for each category

        } # for each instance
    }

    end {
        if (Test-FunctionInterrupt) { return }
        Write-Message -Message "Finished creating job category." -Level Verbose
    }

}

tools\dbatools\functions\New-DbaAgentJobStep.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function New-DbaAgentJobStep {
    <#
    .SYNOPSIS
        New-DbaAgentJobStep creates a new job step for a job

    .DESCRIPTION
        New-DbaAgentJobStep creates a new job in the SQL Server Agent for a specific job

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2000 or greater.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Job
        The name of the job to which to add the step.

    .PARAMETER StepId
        The sequence identification number for the job step. Step identification numbers start at 1 and increment without gaps.

    .PARAMETER StepName
        The name of the step.

    .PARAMETER SubSystem
        The subsystem used by the SQL Server Agent service to execute command.
        Allowed values 'ActiveScripting','AnalysisCommand','AnalysisQuery','CmdExec','Distribution','LogReader','Merge','PowerShell','QueueReader','Snapshot','Ssis','TransactSql'
        The default is 'TransactSql'

    .PARAMETER SubSystemServer
        The subsystems AnalysisScripting, AnalysisCommand, AnalysisQuery ned the server property to be able to apply

    .PARAMETER Command
        The commands to be executed by SQLServerAgent service through subsystem.

    .PARAMETER CmdExecSuccessCode
        The value returned by a CmdExec subsystem command to indicate that command executed successfully.

    .PARAMETER OnSuccessAction
        The action to perform if the step succeeds.
        Allowed values  "QuitWithSuccess" (default), "QuitWithFailure", "GoToNextStep", "GoToStep".
        The text value van either be lowercase, uppercase or something in between as long as the text is correct.

    .PARAMETER OnSuccessStepId
        The ID of the step in this job to execute if the step succeeds and OnSuccessAction is "GoToStep".

    .PARAMETER OnFailAction
        The action to perform if the step fails.
        Allowed values  "QuitWithSuccess" (default), "QuitWithFailure", "GoToNextStep", "GoToStep".
        The text value van either be lowercase, uppercase or something in between as long as the text is correct.

    .PARAMETER OnFailStepId
        The ID of the step in this job to execute if the step fails and OnFailAction is "GoToStep".

    .PARAMETER Database
        The name of the database in which to execute a Transact-SQL step. The default is 'master'.

    .PARAMETER DatabaseUser
        The name of the user account to use when executing a Transact-SQL step.

    .PARAMETER RetryAttempts
        The number of retry attempts to use if this step fails. The default is 0.

    .PARAMETER RetryInterval
        The amount of time in minutes between retry attempts. The default is 0.

    .PARAMETER OutputFileName
        The name of the file in which the output of this step is saved.

    .PARAMETER Flag
        Sets the flag(s) for the job step.

        Flag                                    Description
        ----------------------------------------------------------------------------
        AppendAllCmdExecOutputToJobHistory      Job history, including command output, is appended to the job history file.
        AppendToJobHistory                      Job history is appended to the job history file.
        AppendToLogFile                         Job history is appended to the SQL Server log file.
        AppendToTableLog                        Job history is appended to a log table.
        LogToTableWithOverwrite                 Job history is written to a log table, overwriting previous contents.
        None                                    Job history is not appended to a file.
        ProvideStopProcessEvent                 Job processing is stopped.

    .PARAMETER ProxyName
        The name of the proxy that the job step runs as.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER Force
        The force parameter will ignore some errors in the parameters and assume defaults.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Agent, Job, JobStep
        Author: Sander Stad (@sqlstad), sqlstad.nl

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/New-DbaAgentJobStep

    .EXAMPLE
        PS C:\> New-DbaAgentJobStep -SqlInstance sql1 -Job Job1 -StepName Step1

        Create a step in "Job1" with the name Step1 with the default subsystem TransactSql.

    .EXAMPLE
        PS C:\> New-DbaAgentJobStep -SqlInstance sql1 -Job Job1 -StepName Step1 -Database msdb

        Create a step in "Job1" with the name Step1 where the database will the msdb

    .EXAMPLE
        PS C:\> New-DbaAgentJobStep -SqlInstance sql1, sql2, sql3 -Job Job1 -StepName Step1 -Database msdb

        Create a step in "Job1" with the name Step1 where the database will the "msdb" for multiple servers

    .EXAMPLE
        PS C:\> New-DbaAgentJobStep -SqlInstance sql1, sql2, sql3 -Job Job1, Job2, 'Job Three' -StepName Step1 -Database msdb

        Create a step in "Job1" with the name Step1 where the database will the "msdb" for multiple servers for multiple jobs

    .EXAMPLE
        PS C:\> sql1, sql2, sql3 | New-DbaAgentJobStep -Job Job1 -StepName Step1 -Database msdb

        Create a step in "Job1" with the name Step1 where the database will the "msdb" for multiple servers using pipeline

    #>

    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "Low")]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [object[]]$Job,
        [int]$StepId,
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [string]$StepName,
        [ValidateSet('ActiveScripting', 'AnalysisCommand', 'AnalysisQuery', 'CmdExec', 'Distribution', 'LogReader', 'Merge', 'PowerShell', 'QueueReader', 'Snapshot', 'Ssis', 'TransactSql')]
        [string]$Subsystem = 'TransactSql',
        [string]$SubsystemServer,
        [string]$Command,
        [int]$CmdExecSuccessCode,
        [ValidateSet('QuitWithSuccess', 'QuitWithFailure', 'GoToNextStep', 'GoToStep')]
        [string]$OnSuccessAction = 'QuitWithSuccess',
        [int]$OnSuccessStepId = 0,
        [ValidateSet('QuitWithSuccess', 'QuitWithFailure', 'GoToNextStep', 'GoToStep')]
        [string]$OnFailAction = 'QuitWithFailure',
        [int]$OnFailStepId = 0,
        [object]$Database,
        [string]$DatabaseUser,
        [int]$RetryAttempts,
        [int]$RetryInterval,
        [string]$OutputFileName,
        [ValidateSet('AppendAllCmdExecOutputToJobHistory', 'AppendToJobHistory', 'AppendToLogFile', 'LogToTableWithOverwrite', 'None', 'ProvideStopProcessEvent')]
        [string[]]$Flag,
        [string]$ProxyName,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        # Check the parameter on success step id
        if (($OnSuccessAction -ne 'GoToStep') -and ($OnSuccessStepId -ge 1)) {
            Stop-Function -Message "Parameter OnSuccessStepId can only be used with OnSuccessAction 'GoToStep'." -Target $SqlInstance
            return
        }

        # Check the parameter on fail step id
        if (($OnFailAction -ne 'GoToStep') -and ($OnFailStepId -ge 1)) {
            Stop-Function -Message "Parameter OnFailStepId can only be used with OnFailAction 'GoToStep'." -Target $SqlInstance
            return
        }

        if ($Subsystem -in 'AnalysisScripting', 'AnalysisCommand', 'AnalysisQuery') {
            if (-not $SubsystemServer) {
                Stop-Function -Message "Please enter the server value using -SubSystemServer for subsystem $Subsystem." -Target $Subsystem
                return
            }
        }
    }

    process {

        if (Test-FunctionInterrupt) { return }

        foreach ($instance in $sqlinstance) {
            # Try connecting to the instance
            try {
                $Server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            foreach ($j in $Job) {

                # Check if the job exists
                if ($Server.JobServer.Jobs.Name -notcontains $j) {
                    Write-Message -Message "Job $j doesn't exists on $instance" -Level Warning
                } else {
                    # Create the job step object
                    try {
                        # Get the job
                        $currentjob = $Server.JobServer.Jobs[$j]

                        # Create the job step
                        $JobStep = New-Object Microsoft.SqlServer.Management.Smo.Agent.JobStep

                        # Set the job where the job steps belongs to
                        $JobStep.Parent = $currentjob
                    } catch {
                        Stop-Function -Message "Something went wrong creating the job step" -Target $instance -ErrorRecord $_ -Continue
                    }

                    #region job step options
                    # Setting the options for the job step
                    if ($StepName) {
                        # Check if the step already exists
                        if ($Server.JobServer.Jobs[$j].JobSteps.Name -notcontains $StepName) {
                            $JobStep.Name = $StepName
                        } elseif (($Server.JobServer.Jobs[$j].JobSteps.Name -contains $StepName) -and $Force) {
                            Write-Message -Message "Step $StepName already exists for job. Force is used. Removing existing step" -Level Verbose

                            # Remove the job step based on the name
                            Remove-DbaAgentJobStep -SqlInstance $instance -Job $currentjob -StepName $StepName -SqlCredential $SqlCredential

                            # Set the name job step object
                            $JobStep.Name = $StepName
                        } else {
                            Stop-Function -Message "The step name $StepName already exists for job $j" -Target $instance -Continue
                        }
                    }

                    # If the step id need to be set
                    if ($StepId) {
                        # Check if the used step id is already in place
                        if ($Job.JobSteps.ID -notcontains $StepId) {
                            Write-Message -Message "Setting job step step id to $StepId" -Level Verbose
                            $JobStep.ID = $StepId
                        } elseif (($Job.JobSteps.ID -contains $StepId) -and $Force) {
                            Write-Message -Message "Step ID $StepId already exists for job. Force is used. Removing existing step" -Level Verbose

                            # Remove the existing job step
                            $StepName = ($Server.JobServer.Jobs[$j].JobSteps | Where-Object {$_.ID -eq 1}).Name
                            Remove-DbaAgentJobStep -SqlInstance $instance -Job $currentjob -StepName $StepName -SqlCredential $SqlCredential

                            # Set the ID job step object
                            $JobStep.ID = $StepId
                        } else {
                            Stop-Function -Message "The step id $StepId already exists for job $j" -Target $instance -Continue
                        }
                    } else {
                        # Get the job step count
                        $JobStep.ID = $Job.JobSteps.Count + 1
                    }

                    if ($Subsystem) {
                        Write-Message -Message "Setting job step subsystem to $Subsystem" -Level Verbose
                        $JobStep.Subsystem = $Subsystem
                    }

                    if ($SubsystemServer) {
                        Write-Message -Message "Setting job step subsystem server to $SubsystemServer" -Level Verbose
                        $JobStep.Server = $SubsystemServer
                    }

                    if ($Command) {
                        Write-Message -Message "Setting job step command to $Command" -Level Verbose
                        $JobStep.Command = $Command
                    }

                    if ($CmdExecSuccessCode) {
                        Write-Message -Message "Setting job step command exec success code to $CmdExecSuccessCode" -Level Verbose
                        $JobStep.CommandExecutionSuccessCode = $CmdExecSuccessCode
                    }

                    if ($OnSuccessAction) {
                        Write-Message -Message "Setting job step success action to $OnSuccessAction" -Level Verbose
                        $JobStep.OnSuccessAction = $OnSuccessAction
                    }

                    if ($OnSuccessStepId) {
                        Write-Message -Message "Setting job step success step id to $OnSuccessStepId" -Level Verbose
                        $JobStep.OnSuccessStep = $OnSuccessStepId
                    }

                    if ($OnFailAction) {
                        Write-Message -Message "Setting job step fail action to $OnFailAction" -Level Verbose
                        $JobStep.OnFailAction = $OnFailAction
                    }

                    if ($OnFailStepId) {
                        Write-Message -Message "Setting job step fail step id to $OnFailStepId" -Level Verbose
                        $JobStep.OnFailStep = $OnFailStepId
                    }

                    if ($Database) {
                        # Check if the database is present on the server
                        if ($Server.Databases.Name -contains $Database) {
                            Write-Message -Message "Setting job step database name to $Database" -Level Verbose
                            $JobStep.DatabaseName = $Database
                        } else {
                            Stop-Function -Message "The database is not present on instance $instance." -Target $instance -Continue
                        }
                    }

                    if ($DatabaseUser -and $DatabaseName) {
                        # Check if the username is present in the database
                        if ($Server.Databases[$DatabaseName].Users.Name -contains $DatabaseUser) {

                            Write-Message -Message "Setting job step database username to $DatabaseUser" -Level Verbose
                            $JobStep.DatabaseUserName = $DatabaseUser
                        } else {
                            Stop-Function -Message "The database user is not present in the database $DatabaseName on instance $instance." -Target $instance -Continue
                        }
                    }

                    if ($RetryAttempts) {
                        Write-Message -Message "Setting job step retry attempts to $RetryAttempts" -Level Verbose
                        $JobStep.RetryAttempts = $RetryAttempts
                    }

                    if ($RetryInterval) {
                        Write-Message -Message "Setting job step retry interval to $RetryInterval" -Level Verbose
                        $JobStep.RetryInterval = $RetryInterval
                    }

                    if ($OutputFileName) {
                        Write-Message -Message "Setting job step output file name to $OutputFileName" -Level Verbose
                        $JobStep.OutputFileName = $OutputFileName
                    }

                    if ($ProxyName) {
                        # Check if the proxy exists
                        if ($Server.JobServer.ProxyAccounts.Name -contains $ProxyName) {
                            Write-Message -Message "Setting job step proxy name to $ProxyName" -Level Verbose
                            $JobStep.ProxyName = $ProxyName
                        } else {
                            Stop-Function -Message "The proxy name $ProxyName doesn't exist on instance $instance." -Target $instance -Continue
                        }
                    }

                    if ($Flag.Count -ge 1) {
                        Write-Message -Message "Setting job step flag(s) to $($Flags -join ',')" -Level Verbose
                        $JobStep.JobStepFlags = $Flag
                    }
                    #endregion job step options

                    # Execute
                    if ($PSCmdlet.ShouldProcess($instance, "Creating the job step $StepName")) {
                        try {
                            Write-Message -Message "Creating the job step" -Level Verbose

                            # Create the job step
                            $JobStep.Create()
                            $currentjob.Alter()
                        } catch {
                            Stop-Function -Message "Something went wrong creating the job step" -Target $instance -ErrorRecord $_ -Continue
                        }
                    }

                    # Return the job step
                    $JobStep
                }
            } # foreach object job
        } # foreach object instance
    } # process

    end {
        if (Test-FunctionInterrupt) { return }
        Write-Message -Message "Finished creating job step(s)" -Level Verbose
    }
}

tools\dbatools\functions\New-DbaAgentProxy.ps1

function New-DbaAgentProxy {
    <#
    .SYNOPSIS
        Adds one or more proxies to SQL Server Agent

    .DESCRIPTION
        Adds one or more proxies to SQL Server Agent

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.You must have sysadmin access and server version must be SQL Server version 2000 or higher.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Name
        The name of the proxy or proxies you want to create

    .PARAMETER ProxyCredential
        The associated SQL Server Credential. The credential must be created prior to creating the Proxy.

    .PARAMETER SubSystem
        The associated subsystem or subsystems. Defaults to CmdExec.

        Valid options include:
        ActiveScripting
        AnalysisCommand
        AnalysisQuery
        CmdExec
        Distribution
        LogReader
        Merge
        PowerShell
        QueueReader
        Snapshot
        Ssis
        TransactSql

    .PARAMETER Description
        A description of the proxy

    .PARAMETER Login
        The SQL Server login or logins (known as proxy principals) to assign to the proxy

    .PARAMETER ServerRole
        The SQL Server role or roles (known as proxy principals) to assign to the proxy

    .PARAMETER MsdbRole
        The msdb role or roles (known as proxy principals) to assign to the proxy

    .PARAMETER Disabled
        Create the proxy as disabled

    .PARAMETER Force
        Drop and recreate the proxy if it already exists

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Agent, Proxy
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/New-DbaAgentProxy

    .EXAMPLE
        PS C:\> New-DbaAgentProxy -SqlInstance sql2016 -Name STIG -ProxyCredential 'PowerShell Proxy'

        Creates an Agent Proxy on sql2016 with the name STIG with the 'PowerShell Proxy' credential.
        The proxy is automatically added to the CmdExec subsystem.

    .EXAMPLE
        PS C:\> New-DbaAgentProxy -SqlInstance localhost\sql2016 -Name STIG -ProxyCredential 'PowerShell Proxy' -Description "Used for auditing purposes" -Login ad\sqlstig -SubSystem CmdExec, PowerShell -ServerRole securtyadmin -MsdbRole ServerGroupAdministratorRole

        Creates an Agent Proxy on sql2016 with the name STIG with the 'PowerShell Proxy' credential and the following principals:

        Login: ad\sqlstig
        ServerRole: securtyadmin
        MsdbRole: ServerGroupAdministratorRole

        By default, only sysadmins have access to create job steps with proxies. This will allow 3 additional principals access:
        The proxy is then added to the CmdExec and PowerShell subsystems

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'Low')]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSAvoidUsingPlainTextForPassword", "", Justification = "For Parameter ProxyCredential")]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [parameter(Mandatory)]
        [string[]]$Name,
        [parameter(Mandatory)]
        [string[]]$ProxyCredential,
        [ValidateSet("ActiveScripting", "AnalysisCommand", "AnalysisQuery", "CmdExec", "Distribution", "LogReader", "Merge", "PowerShell", "QueueReader", "Snapshot", "Ssis", "TransactSql")]
        [string[]]$SubSystem = "CmdExec",
        [string]$Description,
        [string[]]$Login,
        [string[]]$ServerRole,
        [string[]]$MsdbRole,
        [switch]$Disabled,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            try {
                $jobServer = $server.JobServer
            } catch {
                Stop-Function -Message "Failure. Is SQL Agent started?" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            foreach ($proxyname in $name) {

                if ($jobServer.ProxyAccounts[$proxyName]) {
                    if ($force) {
                        if ($Pscmdlet.ShouldProcess($instance, "Dropping $proxyname")) {
                            $jobServer.ProxyAccounts[$proxyName].Drop()
                            $jobServer.ProxyAccounts.Refresh()
                        }
                    } else {
                        Write-Message -Level Warning -Message "Proxy account $proxy already exists on $instance. Use -Force to drop and recreate."
                        continue
                    }
                }

                if (-not $server.Credentials[$ProxyCredential]) {
                    Write-Message -Level Warning -Message "Credential '$ProxyCredential' does not exist on $instance"
                    continue
                }

                if ($Pscmdlet.ShouldProcess($instance, "Adding $proxyname with the $ProxyCredential credential")) {
                    # the new-object is stubborn and $true/$false has to be forced in
                    switch (Test-Bound $disabled) {
                        $false {
                            $proxy = New-Object Microsoft.SqlServer.Management.Smo.Agent.ProxyAccount -ArgumentList $jobServer, $ProxyName, $ProxyCredential, $true, $Description
                        }
                        $true {
                            $proxy = New-Object Microsoft.SqlServer.Management.Smo.Agent.ProxyAccount -ArgumentList $jobServer, $ProxyName, $ProxyCredential, $false, $Description
                        }
                    }

                    try {
                        $proxy.Create()
                    } catch {
                        Stop-Function -Message "Could not create proxy account" -ErrorRecord $_ -Target $instance -Continue
                    }
                }

                foreach ($loginname in $login) {
                    if ($server.Logins[$loginname]) {
                        if ($Pscmdlet.ShouldProcess($instance, "Adding login $loginname to proxy")) {
                            $proxy.AddLogin($loginname)
                        }
                    } else {
                        Write-Message -Level Warning -Message "Login '$loginname' does not exist on $instance"
                    }
                }

                foreach ($role in $ServerRole) {
                    if ($server.Roles[$role]) {
                        if ($Pscmdlet.ShouldProcess($instance, "Adding server role $role to proxy")) {
                            $proxy.AddServerRole($role)
                        }
                    } else {
                        Write-Message -Level Warning -Message "Server Role '$role' does not exist on $instance"
                    }
                }

                foreach ($role in $MsdbRole) {
                    if ($server.Databases['msdb'].Roles[$role]) {
                        if ($Pscmdlet.ShouldProcess($instance, "Adding msdb role $role to proxy")) {
                            $proxy.AddMsdbRole($role)
                        }
                    } else {
                        Write-Message -Level Warning -Message "msdb role '$role' does not exist on $instance"
                    }
                }

                foreach ($system in $SubSystem) {
                    if ($Pscmdlet.ShouldProcess($instance, "Adding subsystem $system to proxy")) {
                        $proxy.AddSubSystem($system)
                    }
                }

                if ($Pscmdlet.ShouldProcess("console", "Outputting Proxy object")) {
                    $proxy.Alter()
                    $proxy.Refresh()
                    Add-Member -Force -InputObject $proxy -MemberType NoteProperty -Name ComputerName -value $server.ComputerName
                    Add-Member -Force -InputObject $proxy -MemberType NoteProperty -Name InstanceName -value $server.ServiceName
                    Add-Member -Force -InputObject $proxy -MemberType NoteProperty -Name SqlInstance -value $server.DomainInstanceName
                    Add-Member -Force -InputObject $proxy -MemberType NoteProperty -Name Logins -value $proxy.EnumLogins()
                    Add-Member -Force -InputObject $proxy -MemberType NoteProperty -Name ServerRoles -value $proxy.EnumServerRoles()
                    Add-Member -Force -InputObject $proxy -MemberType NoteProperty -Name MsdbRoles -value $proxy.EnumMsdbRoles()
                    Add-Member -Force -InputObject $proxy -MemberType NoteProperty -Name Subsystems -value $proxy.EnumSubSystems()

                    Select-DefaultView -InputObject $proxy -Property ComputerName, InstanceName, SqlInstance, ID, Name, CredentialName, CredentialIdentity, Description, Logins, ServerRoles, MsdbRoles, SubSystems, IsEnabled
                }
            }
        }
    }
}

tools\dbatools\functions\New-DbaAgentSchedule.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function New-DbaAgentSchedule {
    <#
    .SYNOPSIS
        New-DbaAgentSchedule creates a new schedule in the msdb database.

    .DESCRIPTION
        New-DbaAgentSchedule will help create a new schedule for a job.
        If the job parameter is not supplied the schedule will not be attached to a job.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2000 or greater.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Job
        The name of the job that has the schedule.

    .PARAMETER Schedule
        The name of the schedule.

    .PARAMETER Disabled
        Set the schedule to disabled. Default is enabled

    .PARAMETER FrequencyType
        A value indicating when a job is to be executed.

        Allowed values: Once, Daily, Weekly, Monthly, MonthlyRelative, AgentStart or IdleComputer

        If force is used the default will be "Once".

    .PARAMETER FrequencyInterval
        The days that a job is executed

        Allowed values: Sunday, Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, Weekdays, Weekend or EveryDay.
        The other allowed values are the numbers 1 to 31 for each day of the month.

        If "Weekdays", "Weekend" or "EveryDay" is used it over writes any other value that has been passed before.

        If force is used the default will be 1.

    .PARAMETER FrequencySubdayType
        Specifies the units for the subday FrequencyInterval.

        Allowed values: Time, Seconds, Minutes, or Hours

    .PARAMETER FrequencySubdayInterval
        The number of subday type periods to occur between each execution of a job.

    .PARAMETER FrequencyRelativeInterval
        A job's occurrence of FrequencyInterval in each month, if FrequencyInterval is 32 (monthlyrelative).

        Allowed values: First, Second, Third, Fourth or Last

    .PARAMETER FrequencyRecurrenceFactor
        The number of weeks or months between the scheduled execution of a job.

        FrequencyRecurrenceFactor is used only if FrequencyType is "Weekly", "Monthly" or "MonthlyRelative".

    .PARAMETER StartDate
        The date on which execution of a job can begin.

        If force is used the start date will be the current day

    .PARAMETER EndDate
        The date on which execution of a job can stop.

        If force is used the end date will be '9999-12-31'

    .PARAMETER StartTime
        The time on any day to begin execution of a job. Format HHMMSS / 24 hour clock.
        Example: '010000' for 01:00:00 AM.
        Example: '140000' for 02:00:00 PM.

        If force is used the start time will be '00:00:00'

    .PARAMETER EndTime
        The time on any day to end execution of a job. Format HHMMSS / 24 hour clock.
        Example: '010000' for 01:00:00 AM.
        Example: '140000' for 02:00:00 PM.

        If force is used the start time will be '23:59:59'

    .PARAMETER Owner
        The name of the server principal that owns the schedule. If no value is given the schedule is owned by the creator.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER Force
        The force parameter will ignore some errors in the parameters and assume defaults.
        It will also remove the any present schedules with the same name for the specific job.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Agent, Job, JobStep
        Author: Sander Stad (@sqlstad), sqlstad.nl

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/New-DbaAgentSchedule

    .EXAMPLE
        PS C:\> New-DbaAgentSchedule -SqlInstance localhost\SQL2016 -Schedule daily -FrequencyType Daily -FrequencyInterval Everyday -Force

        Creates a schedule with a daily frequency every day. It assumes default values for the start date, start time, end date and end time due to -Force.

    .EXAMPLE
        PS C:\> New-DbaAgentSchedule -SqlInstance sstad-pc -Schedule MonthlyTest -FrequencyType Monthly -FrequencyInterval 10 -FrequencyRecurrenceFactor 1 -Force

        Create a schedule with a monhtly frequency occuring every 10th of the month. It assumes default values for the start date, start time, end date and end time due to -Force.

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "Low")]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseOutputTypeCorrectly", "", Justification = "PSSA Rule Ignored by BOH")]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [System.Management.Automation.PSCredential]
        $SqlCredential,
        [object[]]$Job,
        [object]$Schedule,
        [switch]$Disabled,
        [ValidateSet('Once', 'Daily', 'Weekly', 'Monthly', 'MonthlyRelative', 'AgentStart', 'IdleComputer')]
        [object]$FrequencyType,
        [ValidateSet('EveryDay', 'Weekdays', 'Weekend', 'Sunday', 'Monday', 'Tuesday', 'Wednesday', 'Thursday', 'Friday', 'Saturday', 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31)]
        [object[]]$FrequencyInterval,
        [ValidateSet('Time', 'Seconds', 'Minutes', 'Hours')]
        [object]$FrequencySubdayType,
        [int]$FrequencySubdayInterval,
        [ValidateSet('Unused', 'First', 'Second', 'Third', 'Fourth', 'Last')]
        [object]$FrequencyRelativeInterval,
        [int]$FrequencyRecurrenceFactor,
        [string]$StartDate,
        [string]$EndDate,
        [string]$StartTime,
        [string]$EndTime,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        # if a Schedule is not provided there is no much point
        if (!$Schedule) {
            Stop-Function -Message "A schedule was not provided! Please provide a schedule name."
            return
        }

        [int]$Interval = 0

        # Translate FrequencyType value from string to the integer value
        if (!$FrequencyType -or $FrequencyType) {
            [int]$FrequencyType =
            switch ($FrequencyType) {
                "Once" { 1 }
                "Daily" { 4 }
                "Weekly" { 8 }
                "Monthly" { 16 }
                "MonthlyRelative" { 32 }
                "AgentStart" { 64 }
                "IdleComputer" { 128 }
                default { 1 }
            }
        }

        # Translate FrequencySubdayType value from string to the integer value
        if (!$FrequencySubdayType -or $FrequencySubdayType) {
            [int]$FrequencySubdayType =
            switch ($FrequencySubdayType) {
                "Time" { 1 }
                "Seconds" { 2 }
                "Minutes" { 4 }
                "Hours" { 8 }
                default { 1 }
            }
        }

        # Check of the relative FrequencyInterval value is of type string and set the integer value
        [int]$FrequencyRelativeInterval =
        switch ($FrequencyRelativeInterval) {
            "First" { 1 }
            "Second" { 2 }
            "Third" { 4 }
            "Fourth" { 8 }
            "Last" { 16 }
            "Unused" { 0 }
            default {0}
        }

        # Check if the interval is valid
        if (($FrequencyType -in 4, "Daily") -and (($FrequencyInterval -lt 1 -or $FrequencyInterval -ge 365) -and -not $FrequencyInterval -eq "EveryDay")) {
            Stop-Function -Message "The frequency interval $FrequencyInterval requires a frequency interval to be between 1 and 365." -Target $SqlInstance
            return
        }

        # Check if the recurrence factor is set for weekly or monthly interval
        if (($FrequencyType -in (16, 8)) -and $FrequencyRecurrenceFactor -lt 1) {
            if ($Force) {
                $FrequencyRecurrenceFactor = 1
                Write-Message -Message "Recurrence factor not set for weekly or monthly interval. Setting it to $FrequencyRecurrenceFactor." -Level Verbose
            } else {
                Stop-Function -Message "The recurrence factor $FrequencyRecurrenceFactor (parameter FrequencyRecurrenceFactor) needs to be at least one when using a weekly or monthly interval." -Target $SqlInstance
                return
            }
        }

        # Check the subday interval
        if (($FrequencySubdayType -in 2, "Seconds", 4, "Minutes") -and (-not ($FrequencySubdayInterval -ge 1 -or $FrequencySubdayInterval -le 59))) {
            Stop-Function -Message "Subday interval $FrequencySubdayInterval must be between 1 and 59 when subday type is 'Seconds' or 'Minutes'" -Target $SqlInstance
            return
        } elseif (($FrequencySubdayType -eq 8, "Hours") -and (-not ($FrequencySubdayInterval -ge 1 -and $FrequencySubdayInterval -le 23))) {
            Stop-Function -Message "Subday interval $FrequencySubdayInterval must be between 1 and 23 when subday type is 'Hours'" -Target $SqlInstance
            return
        }

        # If the FrequencyInterval is set for the daily FrequencyType
        if ($FrequencyType -in 4, 'Daily') {
            # Create the interval to hold the value(s)
            [int]$Interval = 0

            # Create the interval to hold the value(s)
            switch ($FrequencyInterval) {
                "EveryDay" { $Interval = 1}
                default {$Interval = 1 }
            }

        }

        # If the FrequencyInterval is set for the weekly FrequencyType
        if ($FrequencyType -in 8, 'Weekly') {
            # Create the interval to hold the value(s)
            [int]$Interval = 0

            # Loop through the array
            foreach ($Item in $FrequencyInterval) {

                switch ($Item) {
                    "Sunday" { $Interval += 1 }
                    "Monday" { $Interval += 2 }
                    "Tuesday" { $Interval += 4 }
                    "Wednesday" { $Interval += 8 }
                    "Thursday" { $Interval += 16 }
                    "Friday" { $Interval += 32 }
                    "Saturday" { $Interval += 64 }
                    "Weekdays" { $Interval = 62 }
                    "Weekend" { $Interval = 65 }
                    "EveryDay" {$Interval = 127 }
                    1 { $Interval += 1 }
                    2 { $Interval += 2 }
                    4 { $Interval += 4 }
                    8 { $Interval += 8 }
                    16 { $Interval += 16 }
                    32 { $Interval += 32 }
                    64 { $Interval += 64 }
                    62 { $Interval = 62 }
                    65 { $Interval = 65 }
                    127 {$Interval = 127 }
                    default { $Interval = 0 }
                }
            }
        }

        # If the FrequencyInterval is set for the monthly FrequencyInterval
        if ($FrequencyType -in 16, 'Monthly') {
            # Create the interval to hold the value(s)
            [int]$Interval = 0

            # Loop through the array
            foreach ($Item in $FrequencyInterval) {
                $FrequencyInterval
                switch ($Item) {
                    {[int]$_ -ge 1 -and [int]$_ -le 31} { $Interval = [int]$Item }
                }
            }


        }

        # If the FrequencyInterval is set for the relative monthly FrequencyInterval
        if ($FrequencyType -eq 32) {
            # Create the interval to hold the value(s)
            [int]$Interval = 0

            # Loop through the array
            foreach ($Item in $FrequencyInterval) {
                switch ($Item) {
                    "Sunday" { $Interval += 1 }
                    "Monday" { $Interval += 2 }
                    "Tuesday" { $Interval += 3 }
                    "Wednesday" { $Interval += 4 }
                    "Thursday" { $Interval += 5 }
                    "Friday" { $Interval += 6 }
                    "Saturday" { $Interval += 7 }
                    "Day" { $Interval += 8 }
                    "Weekday" { $Interval += 9 }
                    "WeekendDay" { $Interval += 10 }
                    1 { $Interval += 1 }
                    2 { $Interval += 2 }
                    3 { $Interval += 3 }
                    4 { $Interval += 4 }
                    5 { $Interval += 5 }
                    6 { $Interval += 6 }
                    7 { $Interval += 7 }
                    8 { $Interval += 8 }
                    9 { $Interval += 9 }
                    10 { $Interval += 10 }
                }
            }
        }

        # Check if the interval is valid for the frequency
        if ($FrequencyType -eq 0) {
            if ($Force) {
                Write-Message -Message "Parameter FrequencyType must be set to at least [Once]. Setting it to 'Once'." -Level Warning
                $FrequencyType = 1
            } else {
                Stop-Function -Message "Parameter FrequencyType must be set to at least [Once]" -Target $SqlInstance
                return
            }
        }

        # Check if the interval is valid for the frequency
        if (($FrequencyType -in 4, 8, 32) -and ($Interval -lt 1)) {
            if ($Force) {
                Write-Message -Message "Parameter FrequencyInterval must be provided for a recurring schedule. Setting it to first day of the week." -Level Warning
                $Interval = 1
            } else {
                Stop-Function -Message "Parameter FrequencyInterval must be provided for a recurring schedule." -Target $SqlInstance
                return
            }
        }

        # Setup the regex
        $RegexDate = '(?<!\d)(?:(?:(?:1[6-9]|[2-9]\d)?\d{2})(?:(?:(?:0[13578]|1[02])31)|(?:(?:0[1,3-9]|1[0-2])(?:29|30)))|(?:(?:(?:(?:1[6-9]|[2-9]\d)?(?:0[48]|[2468][048]|[13579][26])|(?:(?:16|[2468][048]|[3579][26])00)))0229)|(?:(?:1[6-9]|[2-9]\d)?\d{2})(?:(?:0?[1-9])|(?:1[0-2]))(?:0?[1-9]|1\d|2[0-8]))(?!\d)'
        $RegexTime = '^(?:(?:([01]?\d|2[0-3]))?([0-5]?\d))?([0-5]?\d)$'

        # Check the start date
        if (-not $StartDate -and $Force) {
            $StartDate = Get-Date -Format 'yyyyMMdd'
            Write-Message -Message "Start date was not set. Force is being used. Setting it to $StartDate" -Level Verbose
        } elseif (-not $StartDate) {
            Stop-Function -Message "Please enter a start date or use -Force to use defaults." -Target $SqlInstance
            return
        } elseif ($StartDate -notmatch $RegexDate) {
            Stop-Function -Message "Start date $StartDate needs to be a valid date with format yyyyMMdd" -Target $SqlInstance
            return
        }

        # Check the end date
        if (-not $EndDate -and $Force) {
            $EndDate = '99991231'
            Write-Message -Message "End date was not set. Force is being used. Setting it to $EndDate" -Level Verbose
        } elseif (-not $EndDate) {
            Stop-Function -Message "Please enter an end date or use -Force to use defaults." -Target $SqlInstance
            return
        }

        elseif ($EndDate -notmatch $RegexDate) {
            Stop-Function -Message "End date $EndDate needs to be a valid date with format yyyyMMdd" -Target $SqlInstance
            return
        } elseif ($EndDate -lt $StartDate) {
            Stop-Function -Message "End date $EndDate cannot be before start date $StartDate" -Target $SqlInstance
            return
        }

        # Check the start time
        if (-not $StartTime -and $Force) {
            $StartTime = '000000'
            Write-Message -Message "Start time was not set. Force is being used. Setting it to $StartTime" -Level Verbose
        } elseif (-not $StartTime) {
            Stop-Function -Message "Please enter a start time or use -Force to use defaults." -Target $SqlInstance
            return
        } elseif ($StartTime -notmatch $RegexTime) {
            Stop-Function -Message "Start time $StartTime needs to match between '000000' and '235959'" -Target $SqlInstance
            return
        }

        # Check the end time
        if (-not $EndTime -and $Force) {
            $EndTime = '235959'
            Write-Message -Message "End time was not set. Force is being used. Setting it to $EndTime" -Level Verbose
        } elseif (-not $EndTime) {
            Stop-Function -Message "Please enter an end time or use -Force to use defaults." -Target $SqlInstance
            return
        } elseif ($EndTime -notmatch $RegexTime) {
            Stop-Function -Message "End time $EndTime needs to match between '000000' and '235959'" -Target $SqlInstance
            return
        }

        #Format dates and times
        if ($StartDate) {
            $StartDate = $StartDate.Insert(6, '-').Insert(4, '-')
        }
        if ($EndDate) {
            $EndDate = $EndDate.Insert(6, '-').Insert(4, '-')
        }
        if ($StartTime) {
            $StartTime = $StartTime.Insert(4, ':').Insert(2, ':')
        }
        if ($EndTime) {
            $EndTime = $EndTime.Insert(4, ':').Insert(2, ':')
        }
    }

    process {
        if (Test-FunctionInterrupt) { return }

        foreach ($instance in $sqlinstance) {
            # Try connecting to the instance
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            # Check if the jobs parameter is set
            if ($Job) {
                # Loop through each of the jobs
                foreach ($j in $Job) {

                    # Check if the job exists
                    if ($Server.JobServer.Jobs.Name -notcontains $j) {
                        Write-Message -Message "Job $j doesn't exists on $instance" -Level Warning
                    } else {
                        # Create the job schedule object
                        try {
                            # Get the job
                            $smoJob = $Server.JobServer.Jobs[$j]

                            # Check if schedule already exists with the same name
                            if ($Server.JobServer.JobSchedules.Name -contains $Schedule) {
                                # Check if force is set which will remove the other schedule
                                if ($Force) {
                                    if ($PSCmdlet.ShouldProcess($instance, "Removing the schedule $Schedule on $instance")) {
                                        # Removing schedule
                                        Remove-DbaAgentSchedule -SqlInstance $instance -SqlCredential $SqlCredential -Schedule $Schedule -Force:$Force
                                    }
                                } else {
                                    Stop-Function -Message "Schedule $Schedule already exists for job $j on instance $instance" -Target $instance -ErrorRecord $_ -Continue
                                }
                            }

                            # Create the job schedule
                            $JobSchedule = New-Object Microsoft.SqlServer.Management.Smo.Agent.JobSchedule($smoJob, $Schedule)

                        } catch {
                            Stop-Function -Message "Something went wrong creating the job schedule $Schedule for job $j." -Target $instance -ErrorRecord $_ -Continue
                        }

                        #region job schedule options
                        if ($Disabled) {
                            Write-Message -Message "Setting job schedule to disabled" -Level Verbose
                            $JobSchedule.IsEnabled = $false
                        } else {
                            Write-Message -Message "Setting job schedule to enabled" -Level Verbose
                            $JobSchedule.IsEnabled = $true
                        }

                        if ($Interval -ge 0) {
                            Write-Message -Message "Setting job schedule frequency interval to $Interval" -Level Verbose
                            $JobSchedule.FrequencyInterval = $Interval
                        }

                        if ($FrequencyType -ge 1) {
                            Write-Message -Message "Setting job schedule frequency to $FrequencyType" -Level Verbose
                            $JobSchedule.FrequencyTypes = $FrequencyType
                        }

                        if ($FrequencySubdayType -ge 1) {
                            Write-Message -Message "Setting job schedule frequency subday type to $FrequencySubdayType" -Level Verbose
                            $JobSchedule.FrequencySubDayTypes = $FrequencySubdayType
                        }

                        if ($FrequencySubdayInterval -ge 1) {
                            Write-Message -Message "Setting job schedule frequency subday interval to $FrequencySubdayInterval" -Level Verbose
                            $JobSchedule.FrequencySubDayInterval = $FrequencySubdayInterval
                        }

                        if (($FrequencyRelativeInterval -ge 1) -and ($FrequencyType -eq 32)) {
                            Write-Message -Message "Setting job schedule frequency relative interval to $FrequencyRelativeInterval" -Level Verbose
                            $JobSchedule.FrequencyRelativeIntervals = $FrequencyRelativeInterval
                        }

                        if (($FrequencyRecurrenceFactor -ge 1) -and ($FrequencyType -in 8, 16, 32)) {
                            Write-Message -Message "Setting job schedule frequency recurrence factor to $FrequencyRecurrenceFactor" -Level Verbose
                            $JobSchedule.FrequencyRecurrenceFactor = $FrequencyRecurrenceFactor
                        }

                        if ($StartDate) {
                            Write-Message -Message "Setting job schedule start date to $StartDate" -Level Verbose
                            $JobSchedule.ActiveStartDate = $StartDate
                        }

                        if ($EndDate) {
                            Write-Message -Message "Setting job schedule end date to $EndDate" -Level Verbose
                            $JobSchedule.ActiveEndDate = $EndDate
                        }

                        if ($StartTime) {
                            Write-Message -Message "Setting job schedule start time to $StartTime" -Level Verbose
                            $JobSchedule.ActiveStartTimeOfDay = $StartTime
                        }

                        if ($EndTime) {
                            Write-Message -Message "Setting job schedule end time to $EndTime" -Level Verbose
                            $JobSchedule.ActiveEndTimeOfDay = $EndTime
                        }
                        #endregion job schedule options

                        # Create the schedule
                        if ($PSCmdlet.ShouldProcess($SqlInstance, "Adding the schedule $Schedule to job $j on $instance")) {
                            try {
                                Write-Message -Message "Adding the schedule $Schedule to job $j" -Level Verbose
                                #$JobSchedule
                                $JobSchedule.Create()

                                Write-Message -Message "Job schedule created with UID $($JobSchedule.ScheduleUid)" -Level Verbose
                            } catch {
                                Stop-Function -Message "Something went wrong adding the schedule" -Target $instance -ErrorRecord $_ -Continue

                            }

                            # Output the job schedule
                            return $JobSchedule
                        }
                    }
                } # foreach object job
            } # end if job
            else {
                # Create the schedule
                $JobSchedule = New-Object Microsoft.SqlServer.Management.Smo.Agent.JobSchedule($Server.JobServer, $Schedule)

                #region job schedule options
                if ($Disabled) {
                    Write-Message -Message "Setting job schedule to disabled" -Level Verbose
                    $JobSchedule.IsEnabled = $false
                } else {
                    Write-Message -Message "Setting job schedule to enabled" -Level Verbose
                    $JobSchedule.IsEnabled = $true
                }

                if ($Interval -ge 1) {
                    Write-Message -Message "Setting job schedule frequency interval to $Interval" -Level Verbose
                    $JobSchedule.FrequencyInterval = $Interval
                }

                if ($FrequencyType -ge 1) {
                    Write-Message -Message "Setting job schedule frequency to $FrequencyType" -Level Verbose
                    $JobSchedule.FrequencyTypes = $FrequencyType
                }

                if ($FrequencySubdayType -ge 1) {
                    Write-Message -Message "Setting job schedule frequency subday type to $FrequencySubdayType" -Level Verbose
                    $JobSchedule.FrequencySubDayTypes = $FrequencySubdayType
                }

                if ($FrequencySubdayInterval -ge 1) {
                    Write-Message -Message "Setting job schedule frequency subday interval to $FrequencySubdayInterval" -Level Verbose
                    $JobSchedule.FrequencySubDayInterval = $FrequencySubdayInterval
                }

                if (($FrequencyRelativeInterval -ge 1) -and ($FrequencyType -eq 32)) {
                    Write-Message -Message "Setting job schedule frequency relative interval to $FrequencyRelativeInterval" -Level Verbose
                    $JobSchedule.FrequencyRelativeIntervals = $FrequencyRelativeInterval
                }

                if (($FrequencyRecurrenceFactor -ge 1) -and ($FrequencyType -in 8, 16, 32)) {
                    Write-Message -Message "Setting job schedule frequency recurrence factor to $FrequencyRecurrenceFactor" -Level Verbose
                    $JobSchedule.FrequencyRecurrenceFactor = $FrequencyRecurrenceFactor
                }

                if ($StartDate) {
                    Write-Message -Message "Setting job schedule start date to $StartDate" -Level Verbose
                    $JobSchedule.ActiveStartDate = $StartDate
                }

                if ($EndDate) {
                    Write-Message -Message "Setting job schedule end date to $EndDate" -Level Verbose
                    $JobSchedule.ActiveEndDate = $EndDate
                }

                if ($StartTime) {
                    Write-Message -Message "Setting job schedule start time to $StartTime" -Level Verbose
                    $JobSchedule.ActiveStartTimeOfDay = $StartTime
                }

                if ($EndTime) {
                    Write-Message -Message "Setting job schedule end time to $EndTime" -Level Verbose
                    $JobSchedule.ActiveEndTimeOfDay = $EndTime
                }

                # Create the schedule
                if ($PSCmdlet.ShouldProcess($SqlInstance, "Adding the schedule $schedule on $instance")) {
                    try {
                        Write-Message -Message "Adding the schedule $JobSchedule on instance $instance" -Level Verbose

                        $JobSchedule.Create()

                        Write-Message -Message "Job schedule created with UID $($JobSchedule.ScheduleUid)" -Level Verbose
                    } catch {
                        Stop-Function -Message "Something went wrong adding the schedule." -Target $instance -ErrorRecord $_ -Continue
                    }

                    # Output the job schedule
                    return $JobSchedule
                }
            }
        } # foreach object instance
    } #process

    end {
        if (Test-FunctionInterrupt) { return }
        Write-Message -Message "Finished creating job schedule(s)." -Level Verbose
    }
}

tools\dbatools\functions\New-DbaAvailabilityGroup.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function New-DbaAvailabilityGroup {
    <#
    .SYNOPSIS
        Automates the creation of availability groups.

    .DESCRIPTION
        Automates the creation of availability groups.

    	* Checks prerequisites
    	* Creates Availability Group and adds primary replica
    	* Grants cluster permissions if necessary
    	* Adds secondary replica if supplied
    	* Adds databases if supplied
    		* Performs backup/restore if seeding mode is manual
    		* Performs backup to NUL if seeding mode is automatic
    	* Adds listener to primary if supplied
    	* Joins secondaries to availability group
    	* Grants endpoint connect permissions to service accounts
    	* Grants CreateAnyDatabase permissions if seeding mode is automatic
    	* Returns Availability Group object from primary

        NOTE: If a backup / restore is performed, the backups will be left intact on the network share.

        Thanks for this, Thomas Stringer! https://blogs.technet.microsoft.com/heyscriptingguy/2013/04/29/set-up-an-alwayson-availability-group-with-powershell/

    .PARAMETER Primary
        The primary SQL Server instance. Server version must be SQL Server version 2012 or higher.

    .PARAMETER PrimarySqlCredential
        Login to the primary instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Secondary
        The target SQL Server instance or instances. Server version must be SQL Server version 2012 or higher.

    .PARAMETER SecondarySqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Name
        The name of the Availability Group.

    .PARAMETER DtcSupport
        Indicates whether the DtcSupport is enabled

    .PARAMETER ClusterType
        Cluster type of the Availability Group. Only supported in SQL Server 2017 and above.
        Options include: External, Wsfc or None. None by default.

    .PARAMETER AutomatedBackupPreference
        Specifies how replicas in the primary role are treated in the evaluation to pick the desired replica to perform a backup.

    .PARAMETER FailureConditionLevel
        Specifies the different conditions that can trigger an automatic failover in Availability Group.

    .PARAMETER HealthCheckTimeout
        This setting used to specify the length of time, in milliseconds, that the SQL Server resource DLL should wait for information returned by the sp_server_diagnostics stored procedure before reporting the Always On Failover Cluster Instance (FCI) as unresponsive.

        Changes that are made to the timeout settings are effective immediately and do not require a restart of the SQL Server resource.

        Defaults to 30000 (30 seconds).

    .PARAMETER Basic
        Indicates whether the availability group is basic. Basic availability groups like pumpkin spice and uggs.

        https://docs.microsoft.com/en-us/sql/database-engine/availability-groups/windows/basic-availability-groups-always-on-availability-groups

    .PARAMETER DatabaseHealthTrigger
        Indicates whether the availability group triggers the database health.

    .PARAMETER Passthru
        Don't create the availability group, just pass thru an object that can be further customized before creation.

    .PARAMETER Database
        The database or databases to add.

    .PARAMETER SharedPath
        The network share where the backups will be backed up and restored from.

        Each SQL Server service account must have access to this share.

        NOTE: If a backup / restore is performed, the backups will be left in tact on the network share.

    .PARAMETER UseLastBackup
        Use the last full backup of database.

    .PARAMETER Force
        Drop and recreate the database on remote servers using fresh backup.

    .PARAMETER AvailabilityMode
        Sets the availability mode of the availability group replica. Options are: AsynchronousCommit and SynchronousCommit. SynchronousCommit is default.

    .PARAMETER FailoverMode
        Sets the failover mode of the availability group replica. Options are Automatic, Manual and External. Automatic is default.

    .PARAMETER BackupPriority
        Sets the backup priority availability group replica. Default is 50.

    .PARAMETER Endpoint
        By default, this command will attempt to find a DatabaseMirror endpoint. If one does not exist, it will create it.

        If an endpoint must be created, the name "hadr_endpoint" will be used. If an alternative is preferred, use Endpoint.

    .PARAMETER ConnectionModeInPrimaryRole
        Specifies the connection intent modes of an Availability Replica in primary role. AllowAllConnections by default.

    .PARAMETER ConnectionModeInSecondaryRole
        Specifies the connection modes of an Availability Replica in secondary role. AllowAllConnections by default.

    .PARAMETER ReadonlyRoutingConnectionUrl
        Sets the read only routing connection url for the availability replica.

    .PARAMETER SeedingMode
        Specifies how the secondary replica will be initially seeded.

        Automatic enables direct seeding. This method will seed the secondary replica over the network. This method does not require you to backup and restore a copy of the primary database on the replica.

        Manual requires you to create a backup of the database on the primary replica and manually restore that backup on the secondary replica.

    .PARAMETER Certificate
        Specifies that the endpoint is to authenticate the connection using the certificate specified by certificate_name to establish identity for authorization.

        The far endpoint must have a certificate with the public key matching the private key of the specified certificate.

    .PARAMETER IPAddress
        Sets the IP address of the availability group listener.

    .PARAMETER SubnetMask
        Sets the subnet IP mask of the availability group listener.

    .PARAMETER Port
        Sets the number of the port used to communicate with the availability group.

    .PARAMETER Dhcp
        Indicates whether the object is DHCP.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: HA
        Author: Chrissy LeMaire (@cl), netnerds.net
        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/New-DbaAvailabilityGroup

    .EXAMPLE
        PS C:\> New-DbaAvailabilityGroup -Primary sql2016a -Name SharePoint

        Creates a new availability group on sql2016a named SharePoint

    .EXAMPLE
        PS C:\> New-DbaAvailabilityGroup -Primary sql2016a -Name SharePoint -Secondary sql2016b

        Creates a new availability group on sql2016b named SharePoint with a secondary replica, sql2016b

    .EXAMPLE
        PS C:\> New-DbaAvailabilityGroup -Primary sql2016std -Name BAG1 -Basic -Confirm:$false

        Creates a basic availability group named BAG1 on sql2016std and does not confirm when setting up

    .EXAMPLE
        PS C:\> New-DbaAvailabilityGroup -Primary sql2016b -Name AG1 -ClusterType Wsfc -Dhcp -Database db1 -UseLastBackup

        Creates an availability group on sql2016b with the name ag1. Uses the last backups available to add the database db1 to the AG.

    .EXAMPLE
        PS C:\> New-DbaAvailabilityGroup -Primary sql2017 -Name SharePoint -ClusterType None -FailoverMode Manual

        Creates a new availability group on sql2017 named SharePoint with a cluster type of none and a failover mode of manual

    .EXAMPLE
        PS C:\> New-DbaAvailabilityGroup -Primary sql1 -Secondary sql2 -Name ag1 -Database pubs -ClusterType None -SeedingMode Automatic -FailoverMode Manual

        Creates a new availability group with a primary replica on sql1 and a secondary on sql2. Automatically adds the database pubs.

    .EXAMPLE
        PS C:\> $cred = Get-Credential sqladmin
        PS C:\> $params = @{
        >> Primary = "sql1"
        >> PrimarySqlCredential = $cred
        >> Secondary = "sql2"
        >> SecondarySqlCredential = $cred
        >> Name = "test-ag"
        >> Database = "pubs"
        >> ClusterType = "None"
        >> SeedingMode = "Automatic"
        >> FailoverMode = "Manual"
        >> Confirm = $false
        >> }
        PS C:\> New-DbaAvailabilityGroup @params

        This exact command was used to create an availability group on docker!
    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'High')]
    param (
        [parameter(ValueFromPipeline)]
        [DbaInstanceParameter]$Primary,
        [PSCredential]$PrimarySqlCredential,
        [DbaInstanceParameter[]]$Secondary,
        [PSCredential]$SecondarySqlCredential,
        # AG

        [parameter(Mandatory)]
        [string]$Name,
        [switch]$DtcSupport,
        [ValidateSet('External', 'Wsfc', 'None')]
        [string]$ClusterType = 'External',
        [ValidateSet('None', 'Primary', 'Secondary', 'SecondaryOnly')]
        [string]$AutomatedBackupPreference = 'Secondary',
        [ValidateSet('OnAnyQualifiedFailureCondition', 'OnCriticalServerErrors', 'OnModerateServerErrors', 'OnServerDown', 'OnServerUnresponsive')]
        [string]$FailureConditionLevel = "OnServerDown",
        [int]$HealthCheckTimeout = 30000,
        [switch]$Basic,
        [switch]$DatabaseHealthTrigger,
        [switch]$Passthru,
        # database

        [string[]]$Database,
        [Alias("NetworkShare")]
        [string]$SharedPath,
        [switch]$UseLastBackup,
        [switch]$Force,
        # replica

        [ValidateSet('AsynchronousCommit', 'SynchronousCommit')]
        [string]$AvailabilityMode = "SynchronousCommit",
        [ValidateSet('Automatic', 'Manual', 'External')]
        [string]$FailoverMode = "Automatic",
        [int]$BackupPriority = 50,
        [ValidateSet('AllowAllConnections', 'AllowReadWriteConnections')]
        [string]$ConnectionModeInPrimaryRole = 'AllowAllConnections',
        [ValidateSet('AllowAllConnections', 'AllowNoConnections', 'AllowReadIntentConnectionsOnly')]
        [string]$ConnectionModeInSecondaryRole = 'AllowAllConnections',
        [ValidateSet('Automatic', 'Manual')]
        [string]$SeedingMode = 'Manual',
        [string]$Endpoint,
        [string]$ReadonlyRoutingConnectionUrl,
        [string]$Certificate,
        # network

        [ipaddress[]]$IPAddress,
        [ipaddress]$SubnetMask = "255.255.255.0",
        [int]$Port = 1433,
        [switch]$Dhcp,
        [switch]$EnableException
    )
    begin {
        Test-DbaDeprecation -DeprecatedOn 1.0.0 -Parameter NetworkShare -CustomMessage "Using the parameter NetworkShare is deprecated. This parameter will be removed in version 1.0.0 or before. Use SharedPath instead."
    }
    process {
        $stepCounter = $wait = 0

        if ($Force -and $Secondary -and (-not $SharedPath -and -not $UseLastBackup) -and ($SeedingMode -ne 'Automatic')) {
            Stop-Function -Message "SharedPath or UseLastBackup is required when Force is used"
            return
        }

        try {
            $server = Connect-SqlInstance -SqlInstance $Primary -SqlCredential $PrimarySqlCredential
        } catch {
            Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $Primary
            return
        }

        if ($SeedingMode -eq 'Automatic' -and $server.VersionMajor -lt 13) {
            Stop-Function -Message "Automatic seeding mode only supported in SQL Server 2016 and above" -Target $Primary
            return
        }

        if ($Basic -and $server.VersionMajor -lt 13) {
            Stop-Function -Message "Basic availability groups are only supported in SQL Server 2016 and above" -Target $Primary
            return
        }

        Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Checking perquisites"

        # Don't reuse $server here, it fails
        if (Get-DbaAvailabilityGroup -SqlInstance $Primary -SqlCredential $PrimarySqlCredential -AvailabilityGroup $Name) {
            Stop-Function -Message "Availability group named $Name already exists on $Primary"
            return
        }

        if ($Certificate) {
            $cert = Get-DbaDbCertificate -SqlInstance $Primary -SqlCredential $PrimarySqlCredential -Certificate $Certificate
            if (-not $cert) {
                Stop-Function -Message "Certificate $Certificate does not exist on $Primary" -ErrorRecord $_ -Target $Primary
                return
            }
        }

        if (($SharedPath)) {
            if (-not (Test-DbaPath -SqlInstance $Primary -SqlCredential $PrimarySqlCredential -Path $SharedPath)) {
                Stop-Function -Continue -Message "Cannot access $SharedPath from $Primary"
                return
            }
        }

        if ($Database -and -not $UseLastBackup -and -not $SharedPath -and $Secondary -and $SeedingMode -ne 'Automatic') {
            Stop-Function -Continue -Message "You must specify a SharedPath when adding databases to a manually seeded availability group"
            return
        }

        if ($server.HostPlatform -eq "Linux") {
            # New to SQL Server 2017 (14.x) is the introduction of a cluster type for AGs. For Linux, there are two valid values: External and None.
            if ($ClusterType -notin "External", "None") {
                Stop-Function -Continue -Message "Linux only supports ClusterType of External or None"
                return
            }
            # Microsoft Distributed Transaction Coordinator (DTC) is not supported under Linux in SQL Server 2017
            if ($DtcSupport) {
                Stop-Function -Continue -Message "Microsoft Distributed Transaction Coordinator (DTC) is not supported under Linux"
                return
            }
        }

        if ($ClusterType -eq "None" -and $server.VersionMajor -lt 14) {
            Stop-Function -Message "ClusterType of None only supported in SQL Server 2017 and above"
            return
        }

        if ($Secondary) {
            $secondaries = @()
            foreach ($computer in $Secondary) {
                try {
                    $secondaries += Connect-SqlInstance -SqlInstance $computer -SqlCredential $SecondarySqlCredential
                } catch {
                    Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $Primary
                    return
                }
            }

            if ($SeedingMode -eq "Automatic") {
                $primarypath = Get-DbaDefaultPath -SqlInstance $server
                foreach ($second in $secondaries) {
                    $secondarypath = Get-DbaDefaultPath -SqlInstance $second
                    if ($primarypath.Data -ne $secondarypath.Data) {
                        Write-Message -Level Warning -Message "Primary and secondary ($second) default data paths do not match. Trying anyway."
                    }
                    if ($primarypath.Log -ne $secondarypath.Log) {
                        Write-Message -Level Warning -Message "Primary and secondary ($second) default log paths do not match. Trying anyway."
                    }
                }
            }
        }

        # database checks
        if ($Database) {
            $dbs += Get-DbaDatabase -SqlInstance $Primary -SqlCredential $PrimarySqlCredential -Database $Database
        }

        foreach ($primarydb in $dbs) {
            if ($primarydb.MirroringStatus -ne "None") {
                Stop-Function -Message "Cannot setup mirroring on database ($dbname) due to its current mirroring state: $($primarydb.MirroringStatus)"
                return
            }

            if ($primarydb.Status -ne "Normal") {
                Stop-Function -Message "Cannot setup mirroring on database ($dbname) due to its current state: $($primarydb.Status)"
                return
            }

            if ($primarydb.RecoveryModel -ne "Full") {
                if ((Test-Bound -ParameterName UseLastBackup)) {
                    Stop-Function -Message "$dbName not set to full recovery. UseLastBackup cannot be used."
                    return
                } else {
                    Set-DbaDbRecoveryModel -SqlInstance $Primary -SqlCredential $PrimarySqlCredential -Database $primarydb.Name -RecoveryModel Full
                }
            }
        }

        Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Creating availability group named $Name on $Primary"

        # Start work
        if ($Pscmdlet.ShouldProcess($Primary, "Setting up availability group named $Name and adding primary replica")) {
            try {
                $ag = New-Object Microsoft.SqlServer.Management.Smo.AvailabilityGroup -ArgumentList $server, $Name
                $ag.AutomatedBackupPreference = [Microsoft.SqlServer.Management.Smo.AvailabilityGroupAutomatedBackupPreference]::$AutomatedBackupPreference
                $ag.FailureConditionLevel = [Microsoft.SqlServer.Management.Smo.AvailabilityGroupFailureConditionLevel]::$FailureConditionLevel
                $ag.HealthCheckTimeout = $HealthCheckTimeout

                if ($server.VersionMajor -ge 13) {
                    $ag.BasicAvailabilityGroup = $Basic
                    $ag.DatabaseHealthTrigger = $DatabaseHealthTrigger
                }

                if ($server.VersionMajor -ge 14) {
                    $ag.ClusterType = $ClusterType
                }

                if ($PassThru) {
                    $defaults = 'LocalReplicaRole', 'Name as AvailabilityGroup', 'PrimaryReplicaServerName as PrimaryReplica', 'AutomatedBackupPreference', 'AvailabilityReplicas', 'AvailabilityDatabases', 'AvailabilityGroupListeners'
                    return (Select-DefaultView -InputObject $ag -Property $defaults)
                }

                $replicaparams = @{
                    InputObject                   = $ag
                    AvailabilityMode              = $AvailabilityMode
                    FailoverMode                  = $FailoverMode
                    BackupPriority                = $BackupPriority
                    ConnectionModeInPrimaryRole   = $ConnectionModeInPrimaryRole
                    ConnectionModeInSecondaryRole = $ConnectionModeInSecondaryRole
                    Endpoint                      = $Endpoint
                    ReadonlyRoutingConnectionUrl  = $ReadonlyRoutingConnectionUrl
                    Certificate                   = $Certificate
                }

                if ($server.VersionMajor -ge 13) {
                    $replicaparams += @{SeedingMode = $SeedingMode}
                }

                $null = Add-DbaAgReplica @replicaparams -EnableException -SqlInstance $server
            } catch {
                $msg = $_.Exception.InnerException.InnerException.Message
                if (-not $msg) {
                    $msg = $_
                }
                Stop-Function -Message $msg -ErrorRecord $_ -Target $Primary
                return
            }
        }

        # Add cluster permissions
        if ($ClusterType -eq 'Wsfc') {
            Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Adding endpoint connect permissions"

            foreach ($second in $secondaries) {
                if ($Pscmdlet.ShouldProcess($Primary, "Adding cluster permissions for availability group named $Name")) {
                    Write-Message -Level Verbose -Message "WSFC Cluster requires granting [NT AUTHORITY\SYSTEM] a few things. Setting now."
                    $sql = "GRANT ALTER ANY AVAILABILITY GROUP TO [NT AUTHORITY\SYSTEM]
                        GRANT CONNECT SQL TO [NT AUTHORITY\SYSTEM]
                        GRANT VIEW SERVER STATE TO [NT AUTHORITY\SYSTEM]"
                    try {
                        $null = $server.Query($sql)
                        foreach ($second in $secondaries) {
                            $null = $second.Query($sql)
                        }
                    } catch {
                        Stop-Function -Message "Failure adding cluster service account permissions" -ErrorRecord $_
                    }
                }
            }
        }

        # Add replicas
        Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Adding secondary replicas"

        foreach ($second in $secondaries) {
            if ($Pscmdlet.ShouldProcess($second.Name, "Adding replica to availability group named $Name")) {
                try {
                    # Add replicas
                    $null = Add-DbaAgReplica @replicaparams -EnableException -SqlInstance $second
                } catch {
                    Stop-Function -Message "Failure" -ErrorRecord $_ -Target $second -Continue
                }
            }
        }

        try {
            # something is up with .net create(), force a stop
            Invoke-Create -Object $ag
        } catch {
            $msg = $_.Exception.InnerException.InnerException.Message
            if (-not $msg) {
                $msg = $_
            }
            Stop-Function -Message $msg -ErrorRecord $_ -Target $Primary
            return
        }

        # Add listener
        if ($IPAddress -or $Dhcp) {
            $progressmsg = "Adding listener"
        } else {
            $progressmsg = "Joining availability group"
        }
        Write-ProgressHelper -StepNumber ($stepCounter++) -Message $progressmsg

        if ($IPAddress) {
            if ($Pscmdlet.ShouldProcess($Primary, "Adding static IP listener for $Name to the Primary replica")) {
                $null = Add-DbaAgListener -InputObject $ag -IPAddress $IPAddress[0] -SubnetMask $SubnetMask -Port $Port -Dhcp:$Dhcp
            }
        } elseif ($Dhcp) {
            if ($Pscmdlet.ShouldProcess($Primary, "Adding DHCP listener for $Name to all replicas")) {
                $null = Add-DbaAgListener -InputObject $ag -Port $Port -Dhcp:$Dhcp
                foreach ($second in $secondaries) {
                    $secag = Get-DbaAvailabilityGroup -SqlInstance $second -AvailabilityGroup $Name
                    $null = Add-DbaAgListener -InputObject $secag -Port $Port -Dhcp:$Dhcp
                }
            }
        }

        Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Joining availability group"

        foreach ($second in $secondaries) {
            if ($Pscmdlet.ShouldProcess("Joining $($second.Name) to $Name")) {
                try {
                    # join replicas to ag
                    Join-DbaAvailabilityGroup -SqlInstance $second -InputObject $ag -EnableException
                } catch {
                    Stop-Function -Message "Failure" -ErrorRecord $_ -Target $second -Continue
                }
            }
        }

        Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Granting permissions on availability group, this may take a moment"

        # Grant permissions, but first, get all necessary service accounts
        $primaryserviceaccount = $server.ServiceAccount.Trim()
        $saname = ([DbaInstanceParameter]($server.DomainInstanceName)).ComputerName

        if ($primaryserviceaccount) {
            if ($primaryserviceaccount.StartsWith("NT ")) {
                $primaryserviceaccount = "$saname`$"
            }
            if ($primaryserviceaccount.StartsWith("$saname")) {
                $primaryserviceaccount = "$saname`$"
            }
            if ($primaryserviceaccount.StartsWith(".")) {
                $primaryserviceaccount = "$saname`$"
            }
        }

        if (-not $primaryserviceaccount) {
            $primaryserviceaccount = "$saname`$"
        }

        $serviceaccounts = @($primaryserviceaccount)

        foreach ($second in $secondaries) {
            # If service account is empty, add the computer account instead
            $secondaryserviceaccount = $second.ServiceAccount.Trim()
            $saname = ([DbaInstanceParameter]($second.DomainInstanceName)).ComputerName

            if ($secondaryserviceaccount) {
                if ($secondaryserviceaccount.StartsWith("NT ")) {
                    $secondaryserviceaccount = "$saname`$"
                }
                if ($secondaryserviceaccount.StartsWith("$saname")) {
                    $secondaryserviceaccount = "$saname`$"
                }
                if ($secondaryserviceaccount.StartsWith(".")) {
                    $secondaryserviceaccount = "$saname`$"
                }
            }

            if (-not $secondaryserviceaccount) {
                $secondaryserviceaccount = "$saname`$"
            }

            $serviceaccounts += $secondaryserviceaccount
        }

        $serviceaccounts = $serviceaccounts | Select-Object -Unique

        if ($SeedingMode -eq 'Automatic') {
            try {
                if ($Pscmdlet.ShouldProcess($server.Name, "Seeding mode is automatic. Adding CreateAnyDatabase permissions to availability group.")) {
                    $null = $server.Query("ALTER AVAILABILITY GROUP [$Name] GRANT CREATE ANY DATABASE")
                }
            } catch {
                # Log the exception but keep going
                Stop-Function -Message "Failure" -ErrorRecord $_
            }
        }

        # Add databases
        Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Adding databases"

        $null = Add-DbaAgDatabase -SqlInstance $Primary -SqlCredential $PrimarySqlCredential -AvailabilityGroup $Name -Database $Database -SeedingMode $SeedingMode -SharedPath $SharedPath -Secondary $Secondary -SecondarySqlCredential $SecondarySqlCredential

        foreach ($second in $secondaries) {
            if ($server.HostPlatform -ne "Linux" -and $second.HostPlatform -ne "Linux") {
                if ($Pscmdlet.ShouldProcess($second.Name, "Granting Connect permissions to service accounts: $serviceaccounts")) {
                    $null = Grant-DbaAgPermission -SqlInstance $server, $second -Login $serviceaccounts -Type Endpoint -Permission Connect
                }
            }
            if ($SeedingMode -eq 'Automatic') {
                $done = $false
                try {
                    if ($Pscmdlet.ShouldProcess($second.Name, "Seeding mode is automatic. Adding CreateAnyDatabase permissions to availability group.")) {
                        do {
                            $second.Refresh()
                            $second.AvailabilityGroups.Refresh()
                            if (Get-DbaAvailabilityGroup -SqlInstance $second -AvailabilityGroup $Name) {
                                $null = $second.Query("ALTER AVAILABILITY GROUP [$Name] GRANT CREATE ANY DATABASE")
                                $done = $true
                            } else {
                                $wait++
                                Start-Sleep -Seconds 1
                            }
                        } while ($wait -lt 20 -and $done -eq $false)
                    }
                } catch {
                    # Log the exception but keep going
                    Stop-Function -Message "Failure" -ErrorRecord $_
                }
            }
        }

        # Get results
        Get-DbaAvailabilityGroup -SqlInstance $Primary -SqlCredential $PrimarySqlCredential -AvailabilityGroup $Name
    }
}

tools\dbatools\functions\New-DbaClientAlias.ps1

function New-DbaClientAlias {
    <#
    .SYNOPSIS
        Creates/updates a sql alias for the specified server - mimics cliconfg.exe

    .DESCRIPTION
        Creates/updates a SQL Server alias by altering HKLM:\SOFTWARE\Microsoft\MSSQLServer\Client

    .PARAMETER ComputerName
        The target computer where the alias will be created

    .PARAMETER Credential
        Allows you to login to remote computers using alternative credentials

    .PARAMETER ServerName
        The target SQL Server

    .PARAMETER Alias
        The alias to be created

    .PARAMETER Protocol
        The protocol for the connection, either TCPIP or NetBIOS. Defaults to TCPIP.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Alias
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/New-DbaClientAlias

    .EXAMPLE
        PS C:\> New-DbaClientAlias -ServerName sqlcluster\sharepoint -Alias sp

        Creates a new TCP alias on the local workstation called sp, which points sqlcluster\sharepoint


    .EXAMPLE
        PS C:\> New-DbaClientAlias -ServerName 'sqlcluster,14443' -Alias spinstance

        Creates a new TCP alias on the local workstation called spinstance, which points to sqlcluster, port 14443.

    .EXAMPLE
        PS C:\> New-DbaClientAlias -ServerName sqlcluster\sharepoint -Alias sp -Protocol NamedPipes

        Creates a new NamedPipes alias on the local workstation called sp, which points sqlcluster\sharepoint

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [DbaInstanceParameter[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [parameter(Mandatory, ValueFromPipeline)]
        [DbaInstanceParameter[]]$ServerName,
        [parameter(Mandatory)]
        [string]$Alias,
        [ValidateSet("TCPIP", "NamedPipes")]
        [string]$Protocol = "TCPIP",
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        # This is a script block so cannot use messaging system
        $scriptblock = {
            $basekeys = "HKLM:\SOFTWARE\WOW6432Node\Microsoft\MSSQLServer", "HKLM:\SOFTWARE\Microsoft\MSSQLServer"
            #Variable marked as unused by PSScriptAnalyzer
            #$ServerName = $args[0]
            $Alias = $args[1]
            $serverstring = $args[2]

            if ($env:PROCESSOR_ARCHITECTURE -like "*64*") { $64bit = $true }

            foreach ($basekey in $basekeys) {
                if ($64bit -ne $true -and $basekey -like "*WOW64*") { continue }

                if ((Test-Path $basekey) -eq $false) {
                    throw "Base key ($basekey) does not exist. Quitting."
                }

                $client = "$basekey\Client"

                if ((Test-Path $client) -eq $false) {
                    # "Creating $client key"
                    $null = New-Item -Path $client -Force
                }

                $connect = "$client\ConnectTo"

                if ((Test-Path $connect) -eq $false) {
                    # "Creating $connect key"
                    $null = New-Item -Path $connect -Force
                }

                <#
                #Variable marked as unused by PSScriptAnalyzer
                #Looks like it was once used for a Verbose Message
                if ($basekey -like "*WOW64*") {
                    $architecture = "32-bit"
                } else {
                    $architecture = "64-bit"
                }
                #>
                <# DO NOT use Write-Message as this is inside of a script block #>
                # Write-Verbose "Creating/updating alias for $ComputerName for $architecture"
                $null = New-ItemProperty -Path $connect -Name $Alias -Value $serverstring -PropertyType String -Force
            }
        }
    }

    process {
        if ($protocol -eq "TCPIP") {
            $serverstring = "DBMSSOCN,$ServerName"
        } else {
            $serverstring = "DBNMPNTW,\\$ServerName\pipe\sql\query"
        }

        foreach ($computer in $ComputerName.ComputerName) {

            $null = Test-ElevationRequirement -ComputerName $computer -Continue

            if ($PScmdlet.ShouldProcess($computer, "Adding $alias")) {
                try {
                    Invoke-Command2 -ComputerName $computer -Credential $Credential -ScriptBlock $scriptblock -ErrorAction Stop -ArgumentList $ServerName, $Alias, $serverstring
                } catch {
                    Stop-Function -Message "Failure" -ErrorRecord $_ -Target $computer -Continue
                }
            }
        }

        Get-DbaClientAlias -ComputerName $computer -Credential $Credential | Where-Object AliasName -eq $Alias
    }
}

tools\dbatools\functions\New-DbaCmConnection.ps1

function New-DbaCmConnection {
    <#
    .SYNOPSIS
        Generates a connection object for use in remote computer management.

    .DESCRIPTION
        Generates a connection object for use in remote computer management.
        Those objects are used for the purpose of cim/wmi queries, caching which protocol worked, optimizing performance and minimizing authentication errors.

        New-DbaCmConnection will create a NEW object and overwrite any existing ones for the specified computer.
        Furthermore, information stored in the input beyond the computername will be discarded in favor of the new settings.

        Unless the connection cache has been disabled, all connections will automatically be registered in the cache, so no further action is necessary.
        The output is primarily for information purposes, however it may be used to pass objects and circumvent the cache with those.

        NOTE: Generally, this function need not be used, as a first connection to a computer using any connecting function such as "Get-DbaCmObject" will automatically register a new default connection for it.

        This function exists to be able to preconfigure connections.

    .PARAMETER ComputerName
        The computer to build the connection object for.

    .PARAMETER Credential
        The credential to register.

    .PARAMETER UseWindowsCredentials
        Whether using the default windows credentials is legit.
        Not setting this will not exclude using windows credentials, but only not pre-confirm them as working.

    .PARAMETER OverrideExplicitCredential
        Setting this will enable the credential override.
        The override will cause the system to ignore explicitly specified credentials, so long as known, good credentials are available.

    .PARAMETER DisabledConnectionTypes
        Exlicitly disable connection types.
        These types will then not be used for connecting to the computer.

    .PARAMETER DisableBadCredentialCache
        Will prevent the caching of credentials if set to true.

    .PARAMETER DisableCimPersistence
        Will prevent Cim-Sessions to be reused.

    .PARAMETER DisableCredentialAutoRegister
        Will prevent working credentials from being automatically cached

    .PARAMETER EnableCredentialFailover
        Will enable automatic failing over to known to work credentials, when using bad credentials.
        By default, passing bad credentials will cause the Computer Management functions to interrupt with a warning (Or exception if in silent mode).

    .PARAMETER WindowsCredentialsAreBad
        Will prevent the windows credentials of the currently logged on user from being used for the remote connection.

    .PARAMETER CimWinRMOptions
        Specify a set of options to use when connecting to the target computer using CIM over WinRM.
        Use 'New-CimSessionOption' to create such an object.

    .PARAMETER CimDCOMOptions
        Specify a set of options to use when connecting to the target computer using CIM over DCOM.
        Use 'New-CimSessionOption' to create such an object.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: ComputerManagement, CIM
        Friedrich Weinmann (@FredWeinmann)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/New-DbaCmConnection

    .EXAMPLE
        PS C:\> New-DbaCmConnection -ComputerName sql2014 -UseWindowsCredentials -OverrideExplicitCredential -DisabledConnectionTypes CimRM

        Returns a new configuration object for connecting to the computer sql2014.
        - The current user credentials are set as valid
        - The connection is configured to ignore explicit credentials (so all connections use the windows credentials)
        - The connections will not try using CIM over WinRM

        Unless caching is globally disabled, this is automatically stored in the connection cache and will be applied automatically.
        In that (the default) case, the output is for information purposes only and need not be used.

    .EXAMPLE
        PS C:\> Get-Content computers.txt | New-DbaCmConnection -Credential $cred -CimWinRMOptions $options -DisableBadCredentialCache -OverrideExplicitCredential

        Gathers a list of computers from a text file, then creates and registers connections for each of them, setting them to ...
        - use the credentials stored in $cred
        - use the options stored in $options when connecting using CIM over WinRM
        - not store credentials that are known to not work
        - to ignore explicitly specified credentials

        Essentially, this configures all connections to those computers to prefer failure with the specified credentials over using alternative credentials.

    #>
    [CmdletBinding(SupportsShouldProcess, DefaultParameterSetName = 'Credential')]
    param (
        [Parameter(ValueFromPipeline)]
        [Sqlcollaborative.Dbatools.Parameter.DbaCmConnectionParameter[]]
        $ComputerName = $env:COMPUTERNAME,
        [Parameter(ParameterSetName = "Credential")]
        [PSCredential]
        $Credential,
        [Parameter(ParameterSetName = "Windows")]
        [switch]
        $UseWindowsCredentials,
        [switch]
        $OverrideExplicitCredential,
        [Sqlcollaborative.Dbatools.Connection.ManagementConnectionType]
        $DisabledConnectionTypes = 'None',
        [switch]
        $DisableBadCredentialCache,
        [switch]
        $DisableCimPersistence,
        [switch]
        $DisableCredentialAutoRegister,
        [switch]
        $EnableCredentialFailover,
        [Parameter(ParameterSetName = "Credential")]
        [switch]
        $WindowsCredentialsAreBad,
        [Microsoft.Management.Infrastructure.Options.WSManSessionOptions]
        $CimWinRMOptions,
        [Microsoft.Management.Infrastructure.Options.DComSessionOptions]
        $CimDCOMOptions,
        [switch]
        [Alias('Silent')]$EnableException
    )

    begin {
        Write-Message -Level InternalComment -Message "Starting execution"
        Write-Message -Level Verbose -Message "Bound parameters: $($PSBoundParameters.Keys -join ", ")"

        $disable_cache = Get-DbatoolsConfigValue -Name 'ComputerManagement.Cache.Disable.All' -Fallback $false
    }
    process {
        foreach ($connectionObject in $ComputerName) {
            if ($Pscmdlet.ShouldProcess($($connectionObject.connection.computername), "Creating connection object")) {
                if (-not $connectionObject.Success) { Stop-Function -Message "Failed to interpret computername input: $($connectionObject.InputObject)" -Category InvalidArgument -Target $connectionObject.InputObject -Continue }
                Write-Message -Level VeryVerbose -Message "Processing computer: $($connectionObject.Connection.ComputerName)" -Target $connectionObject.Connection

                $connection = New-Object -TypeName Sqlcollaborative.Dbatools.Connection.ManagementConnection -ArgumentList $connectionObject.Connection.ComputerName
                if (Test-Bound "Credential") { $connection.Credentials = $Credential }
                if (Test-Bound "UseWindowsCredentials") {
                    $connection.Credentials = $null
                    $connection.UseWindowsCredentials = $UseWindowsCredentials
                }
                if (Test-Bound "OverrideExplicitCredential") { $connection.OverrideExplicitCredential = $OverrideExplicitCredential }
                if (Test-Bound "DisabledConnectionTypes") { $connection.DisabledConnectionTypes = $DisabledConnectionTypes }
                if (Test-Bound "DisableBadCredentialCache") { $connection.DisableBadCredentialCache = $DisableBadCredentialCache }
                if (Test-Bound "DisableCimPersistence") { $connection.DisableCimPersistence = $DisableCimPersistence }
                if (Test-Bound "DisableCredentialAutoRegister") { $connection.DisableCredentialAutoRegister = $DisableCredentialAutoRegister }
                if (Test-Bound "EnableCredentialFailover") { $connection.DisableCredentialAutoRegister = $EnableCredentialFailover }
                if (Test-Bound "WindowsCredentialsAreBad") { $connection.WindowsCredentialsAreBad = $WindowsCredentialsAreBad }
                if (Test-Bound "CimWinRMOptions") { $connection.CimWinRMOptions = $CimWinRMOptions }
                if (Test-Bound "CimDCOMOptions") { $connection.CimDCOMOptions = $CimDCOMOptions }

                if (-not $disable_cache) {
                    Write-Message -Level Verbose -Message "Writing connection to cache"
                    [Sqlcollaborative.Dbatools.Connection.ConnectionHost]::Connections[$connectionObject.Connection.ComputerName] = $connection
                } else { Write-Message -Level Verbose -Message "Skipping writing to cache, since the cache has been disabled!" }
                $connection
            }
        }
    }
    end {
        Write-Message -Level InternalComment -Message "Stopping execution"
    }
}

tools\dbatools\functions\New-DbaComputerCertificate.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function New-DbaComputerCertificate {
    <#
    .SYNOPSIS
        Creates a new computer certificate useful for Forcing Encryption

    .DESCRIPTION
        Creates a new computer certificate - self-signed or signed by an Active Directory CA, using the Web Server certificate.

        By default, a key with a length of 1024 and a friendly name of the machines FQDN is generated.

        This command was originally intended to help automate the process so that SSL certificates can be available for enforcing encryption on connections.

        It makes a lot of assumptions - namely, that your account is allowed to auto-enroll and that you have permission to do everything it needs to do ;)

        References:
        http://sqlmag.com/sql-server/7-steps-ssl-encryption
        https://azurebi.jppp.org/2016/01/23/using-lets-encrypt-certificates-for-secure-sql-server-connections/
        https://blogs.msdn.microsoft.com/sqlserverfaq/2016/09/26/creating-and-registering-ssl-certificates/

        The certificate is generated using AD's webserver SSL template on the client machine and pushed to the remote machine.

    .PARAMETER ComputerName
       The target SQL Server instance or instances. Defaults to localhost. If target is a cluster, you must also specify ClusterInstanceName (see below)

    .PARAMETER Credential
        Allows you to login to $ComputerName using alternative credentials.

    .PARAMETER CaServer
        Optional - the CA Server where the request will be sent to

    .PARAMETER CaName
        The properly formatted CA name of the corresponding CaServer

    .PARAMETER ClusterInstanceName
        When creating certs for a cluster, use this parameter to create the certificate for the cluster node name. Use ComputerName for each of the nodes.

    .PARAMETER SecurePassword
        Password to encrypt/decrypt private key for export to remote machine

    .PARAMETER FriendlyName
        The FriendlyName listed in the certificate. This defaults to the FQDN of the $ComputerName

    .PARAMETER CertificateTemplate
        The domain's Certificate Template - WebServer by default.

    .PARAMETER KeyLength
        The length of the key - defaults to 1024

    .PARAMETER Store
        Certificate store - defaults to LocalMachine

    .PARAMETER Folder
        Certificate folder - defaults to My (Personal)

    .PARAMETER Dns
        Specify the Dns entries listed in SAN. By default, it will be ComputerName + FQDN, or in the case of clusters, clustername + cluster FQDN.

    .PARAMETER SelfSigned
        Creates a self-signed certificate. All other parameters can still apply except CaServer and CaName because the command does not go and get the certificate signed.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .NOTES
        Tags: Certificate
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> New-DbaComputerCertificate

        Creates a computer certificate signed by the local domain CA for the local machine with the keylength of 1024.

    .EXAMPLE
        PS C:\> New-DbaComputerCertificate -ComputerName Server1

        Creates a computer certificate signed by the local domain CA _on the local machine_ for server1 with the keylength of 1024.

        The certificate is then copied to the new machine over WinRM and imported.

    .EXAMPLE
        PS C:\> New-DbaComputerCertificate -ComputerName sqla, sqlb -ClusterInstanceName sqlcluster -KeyLength 4096

        Creates a computer certificate for sqlcluster, signed by the local domain CA, with the keylength of 4096.

        The certificate is then copied to sqla _and_ sqlb over WinRM and imported.

    .EXAMPLE
        PS C:\> New-DbaComputerCertificate -ComputerName Server1 -WhatIf

        Shows what would happen if the command were run

    .EXAMPLE
        PS C:\> New-DbaComputerCertificate -SelfSigned

        Creates a self-signed certificate

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "Low")]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseOutputTypeCorrectly", "", Justification = "PSSA Rule Ignored by BOH")]
    param (
        [parameter(ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "SqlInstance")]
        [DbaInstance[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [string]$CaServer,
        [string]$CaName,
        [string]$ClusterInstanceName,
        [Alias("Password")]
        [securestring]$SecurePassword,
        [string]$FriendlyName = "SQL Server",
        [string]$CertificateTemplate = "WebServer",
        [int]$KeyLength = 1024,
        [string]$Store = "LocalMachine",
        [string]$Folder = "My",
        [string[]]$Dns,
        [switch]$SelfSigned,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {
        $englishCodes = 9, 1033, 2057, 3081, 4105, 5129, 6153, 7177, 8201, 9225
        if ($englishCodes -notcontains (Get-DbaCmObject Win32_OperatingSystem).OSLanguage) {
            Stop-Function -Message "Currently, this command is only supported in English OS locales. OS Locale detected: $([System.Globalization.CultureInfo]::GetCultureInfo([int](Get-DbaCmObject Win32_OperatingSystem).OSLanguage).DisplayName)`nWe apologize for the inconvenience and look into providing universal language support in future releases."
            return
        }

        if (-not (Test-ElevationRequirement -ComputerName $env:COMPUTERNAME)) {
            return
        }

        function GetHexLength {
            [cmdletbinding()]
            param(
                [int]$strLen
            )
            $hex = [String]::Format("{0:X2}", $strLen)

            if ($strLen -gt 127) { [String]::Format("{0:X2}", 128 + ($hex.Length / 2)) + $hex }
            else { $hex }
        }

        function Get-SanExt {
            [cmdletbinding()]
            param(
                [string[]]$hostName
            )
            # thanks to Lincoln of
            # https://social.technet.microsoft.com/Forums/windows/en-US/f568edfa-7f93-46a4-aab9-a06151592dd9/converting-ascii-to-asn1-der

            $temp = ''
            foreach ($fqdn in $hostName) {
                # convert each character of fqdn to hex
                $hexString = ($fqdn.ToCharArray() | ForEach-Object { [String]::Format("{0:X2}", [int]$_) }) -join ''

                # length of hex fqdn, in hex
                $hexLength = GetHexLength ($hexString.Length / 2)

                # concatenate special code 82, hex length, hex string
                $temp += "82${hexLength}${hexString}"
            }
            # calculate total length of concatenated string, in hex
            $totalHexLength = GetHexLength ($temp.Length / 2)
            # concatenate special code 30, hex length, hex string
            $temp = "30${totalHexLength}${temp}"
            # convert to binary
            $bytes = $(
                for ($i = 0; $i -lt $temp.Length; $i += 2) {
                    [byte]"0x$($temp.SubString($i, 2))"
                }
            )
            # convert to base 64
            $base64 = [Convert]::ToBase64String($bytes)
            # output in proper format
            for ($i = 0; $i -lt $base64.Length; $i += 64) {
                $line = $base64.SubString($i, [Math]::Min(64, $base64.Length - $i))
                if ($i -eq 0) { "2.5.29.17=$line" }
                else { "_continue_=$line" }
            }
        }

        if ((!$CaServer -or !$CaName) -and !$SelfSigned) {
            try {
                Write-Message -Level Verbose -Message "No CaServer or CaName specified. Performing lookup."
                # hat tip Vadims Podans
                $domain = ([System.DirectoryServices.ActiveDirectory.Domain]::GetCurrentDomain()).Name
                $domain = "DC=" + $domain -replace '\.', ", DC="
                $pks = [ADSI]"LDAP://CN=Enrollment Services, CN=Public Key Services, CN=Services, CN=Configuration, $domain"
                $cas = $pks.psBase.Children

                $allCas = @()
                foreach ($ca in $cas) {
                    $allCas += [pscustomobject]@{
                        CA       = $ca | ForEach-Object { $_.Name }
                        Computer = $ca | ForEach-Object { $_.DNSHostName }
                    }
                }
            } catch {
                Stop-Function -Message "Cannot access Active Directory or find the Certificate Authority" -ErrorRecord $_
                return
            }

            if (!$CaServer) {
                $CaServer = ($allCas | Select-Object -First 1).Computer
                Write-Message -Level Verbose -Message "Root Server: $CaServer"
            }

            if (!$CaName) {
                $CaName = ($allCas | Select-Object -First 1).CA
                Write-Message -Level Verbose -Message "Root CA name: $CaName"
            }
        }

        $tempDir = ([System.IO.Path]::GetTempPath()).TrimEnd("\")
        $certTemplate = "CertificateTemplate:$CertificateTemplate"
    }

    process {
        if (Test-FunctionInterrupt) { return }

        # uses dos command locally
        

        foreach ($computer in $ComputerName) {

            if (!$secondaryNode) {

                if ($ClusterInstanceName) {
                    if ($ClusterInstanceName -notmatch "\.") {
                        $fqdn = "$ClusterInstanceName.$env:USERDNSDOMAIN"
                    } else {
                        $fqdn = $ClusterInstanceName
                    }
                } else {
                    $resolved = Resolve-DbaNetworkName -ComputerName $computer.ComputerName -WarningAction SilentlyContinue

                    if (!$resolved) {
                        $fqdn = "$ComputerName.$env:USERDNSDOMAIN"
                        Write-Message -Level Warning -Message "Server name cannot be resolved. Guessing it's $fqdn"
                    } else {
                        $fqdn = $resolved.fqdn
                    }
                }

                $certDir = "$tempDir\$fqdn"
                $certCfg = "$certDir\request.inf"
                $certCsr = "$certDir\$fqdn.csr"
                $certCrt = "$certDir\$fqdn.crt"
                $certPfx = "$certDir\$fqdn.pfx"
                $tempPfx = "$certDir\temp-$fqdn.pfx"

                if (Test-Path($certDir)) {
                    Write-Message -Level Output -Message "Deleting files from $certDir"
                    $null = Remove-Item "$certDir\*.*"
                } else {
                    Write-Message -Level Output -Message "Creating $certDir"
                    $null = New-Item -Path $certDir -ItemType Directory -Force
                }

                # Make sure output is compat with clusters
                $shortName = $fqdn.Split(".")[0]

                if (!$dns) {
                    $dns = $shortName, $fqdn
                }

                $san = Get-SanExt $dns
                # Write config file
                Set-Content $certCfg "[Version]"
                Add-Content $certCfg 'Signature="$Windows NT$"'
                Add-Content $certCfg "[NewRequest]"
                Add-Content $certCfg "Subject = ""CN=$fqdn"""
                Add-Content $certCfg "KeySpec = 1"
                Add-Content $certCfg "KeyLength = $KeyLength"
                Add-Content $certCfg "Exportable = TRUE"
                Add-Content $certCfg "MachineKeySet = TRUE"
                Add-Content $certCfg "FriendlyName=""$FriendlyName"""
                Add-Content $certCfg "SMIME = False"
                Add-Content $certCfg "PrivateKeyArchive = FALSE"
                Add-Content $certCfg "UserProtected = FALSE"
                Add-Content $certCfg "UseExistingKeySet = FALSE"
                Add-Content $certCfg "ProviderName = ""Microsoft RSA SChannel Cryptographic Provider"""
                Add-Content $certCfg "ProviderType = 12"
                if ($SelfSigned) {
                    Add-Content $certCfg "RequestType = Cert"
                } else {
                    Add-Content $certCfg "RequestType = PKCS10"
                }
                Add-Content $certCfg "KeyUsage = 0xa0"
                Add-Content $certCfg "[EnhancedKeyUsageExtension]"
                Add-Content $certCfg "OID=1.3.6.1.5.5.7.3.1"
                Add-Content $certCfg "[Extensions]"
                Add-Content $certCfg $san
                Add-Content $certCfg "Critical=2.5.29.17"


                if ($PScmdlet.ShouldProcess("local", "Creating certificate for $computer")) {
                    Write-Message -Level Output -Message "Running: certreq -new $certCfg $certCsr"
                    $create = certreq -new $certCfg $certCsr
                }

                if ($SelfSigned) {
                    $serial = (($create -Split "Serial Number:" -Split "Subject")[2]).Trim() # D:
                    $storedCert = Get-ChildItem Cert:\LocalMachine\My -Recurse | Where-Object SerialNumber -eq $serial

                    if ($computer.IsLocalHost) {
                        $storedCert | Select-Object * | Select-DefaultView -Property FriendlyName, DnsNameList, Thumbprint, NotBefore, NotAfter, Subject, Issuer
                    }
                } else {
                    if ($PScmdlet.ShouldProcess("local", "Submitting certificate request for $computer to $CaServer\$CaName")) {
                        Write-Message -Level Output -Message "certreq -submit -config `"$CaServer\$CaName`" -attrib $certTemplate $certCsr $certCrt $certPfx"
                        $submit = certreq -submit -config ""$CaServer\$CaName"" -attrib $certTemplate $certCsr $certCrt $certPfx
                    }

                    if ($submit -match "ssued") {
                        Write-Message -Level Output -Message "certreq -accept -machine $certCrt"
                        $null = certreq -accept -machine $certCrt
                        $cert = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2
                        $cert.Import($certCrt, $null, [System.Security.Cryptography.X509Certificates.X509KeyStorageFlags]::DefaultKeySet)
                        $storedCert = Get-ChildItem "Cert:\$store\$folder" -Recurse | Where-Object { $_.Thumbprint -eq $cert.Thumbprint }
                    } elseif ($submit) {
                        Write-Message -Level Warning -Message "Something went wrong"
                        Write-Message -Level Warning -Message "$create"
                        Write-Message -Level Warning -Message "$submit"
                        Stop-Function -Message "Failure when attempting to create the cert on $computer. Exception: $_" -ErrorRecord $_ -Target $computer -Continue
                    }

                    if ($Computer.IsLocalHost) {
                        $storedCert | Select-Object * | Select-DefaultView -Property FriendlyName, DnsNameList, Thumbprint, NotBefore, NotAfter, Subject, Issuer
                    }
                }
            }

            if (!$Computer.IsLocalHost) {

                if (!$secondaryNode) {
                    if ($PScmdlet.ShouldProcess("local", "Generating pfx and reading from disk")) {
                        Write-Message -Level Output -Message "Exporting PFX with password to $tempPfx"
                        $certdata = $storedCert.Export([System.Security.Cryptography.X509Certificates.X509ContentType]::PFX, $SecurePassword)
                    }

                    if ($PScmdlet.ShouldProcess("local", "Removing cert from disk but keeping it in memory")) {
                        $storedCert | Remove-Item
                    }

                    if ($ClusterInstanceName) { $secondaryNode = $true }
                }

                $scriptblock = {
                    $cert = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2
                    $cert.Import($args[0], $args[1], "Exportable,PersistKeySet")

                    $certstore = New-Object System.Security.Cryptography.X509Certificates.X509Store($args[3], $args[2])
                    $certstore.Open('ReadWrite')
                    $certstore.Add($cert)
                    $certstore.Close()
                    Get-ChildItem "Cert:\$($args[2])\$($args[3])" -Recurse | Where-Object { $_.Thumbprint -eq $cert.Thumbprint }
                }

                if ($PScmdlet.ShouldProcess("local", "Connecting to $computer to import new cert")) {
                    try {
                        Invoke-Command2 -ComputerName $computer -Credential $Credential -ArgumentList $certdata, $SecurePassword, $Store, $Folder -ScriptBlock $scriptblock -ErrorAction Stop |
                            Select-DefaultView -Property DnsNameList, Thumbprint, NotBefore, NotAfter, Subject, Issuer
                    } catch {
                        Stop-Function -Message "Issue importing new cert on $computer" -ErrorRecord $_ -Target $computer -Continue
                    }
                }
            }
            if ($PScmdlet.ShouldProcess("local", "Removing all files from $certDir")) {
                try {
                    Remove-Item -Force -Recurse $certDir -ErrorAction SilentlyContinue
                } catch {
                    Stop-Function "Isue removing files from $certDir" -Target $certDir -ErrorRecord $_
                }
            }
        }
    }
}

tools\dbatools\functions\New-DbaConnectionString.ps1

function New-DbaConnectionString {
    <#
    .SYNOPSIS
        Builds or extracts a SQL Server Connection String

    .DESCRIPTION
        Builds or extracts a SQL Server Connection String

        See https://msdn.microsoft.com/en-us/library/system.data.sqlclient.sqlconnection.connectionstring.aspx
        and https://msdn.microsoft.com/en-us/library/system.data.sqlclient.sqlconnectionstringbuilder.aspx
        and https://msdn.microsoft.com/en-us/library/system.data.sqlclient.sqlconnection.aspx

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER Credential
        Credential object used to connect to the SQL Server as a different user be it Windows or SQL Server. Windows users are determined by the existence of a backslash, so if you are intending to use an alternative Windows connection instead of a SQL login, ensure it contains a backslash.

    .PARAMETER AccessToken
        Gets or sets the access token for the connection.

    .PARAMETER AppendConnectionString
        Appends to the current connection string. Note that you cannot pass authentication information using this method. Use -SqlInstance and, optionally, -SqlCredential to set authentication information.

    .PARAMETER ApplicationIntent
        Declares the application workload type when connecting to a server. Possible values are ReadOnly and ReadWrite.

    .PARAMETER BatchSeparator
        By default, this is "GO"

    .PARAMETER ClientName
        By default, this command sets the client to "dbatools PowerShell module - dbatools.io - custom connection" if you're doing anything that requires profiling, you can look for this client name. Using -ClientName allows you to set your own custom client.

    .PARAMETER ConnectTimeout
        The length of time (in seconds) to wait for a connection to the server before terminating the attempt and generating an error.

        Valid values are greater than or equal to 0 and less than or equal to 2147483647.

        When opening a connection to a Azure SQL Database, set the connection timeout to 30 seconds.

    .PARAMETER EncryptConnection
        When true, SQL Server uses SSL encryption for all data sent between the client and server if the server has a certificate installed. Recognized values are true, false, yes, and no. For more information, see Connection String Syntax.

        Beginning in .NET Framework 4.5, when TrustServerCertificate is false and Encrypt is true, the server name (or IP address) in a SQL Server SSL certificate must exactly match the server name (or IP address) specified in the connection string. Otherwise, the connection attempt will fail. For information about support for certificates whose subject starts with a wildcard character (*), see Accepted wildcards used by server certificates for server authentication.

    .PARAMETER FailoverPartner
        The name of the failover partner server where database mirroring is configured.

        If the value of this key is "", then Initial Catalog must be present, and its value must not be "".

        The server name can be 128 characters or less.

        If you specify a failover partner but the failover partner server is not configured for database mirroring and the primary server (specified with the Server keyword) is not available, then the connection will fail.

        If you specify a failover partner and the primary server is not configured for database mirroring, the connection to the primary server (specified with the Server keyword) will succeed if the primary server is available.

    .PARAMETER IsActiveDirectoryUniversalAuth
        Azure related

    .PARAMETER LockTimeout
        Sets the time in seconds required for the connection to time out when the current transaction is locked.

    .PARAMETER MaxPoolSize
        Sets the maximum number of connections allowed in the connection pool for this specific connection string.

    .PARAMETER MinPoolSize
        Sets the minimum number of connections allowed in the connection pool for this specific connection string.

    .PARAMETER MultipleActiveResultSets
        When used, an application can maintain multiple active result sets (MARS). When false, an application must process or cancel all result sets from one batch before it can execute any other batch on that connection.

    .PARAMETER MultiSubnetFailover
        If your application is connecting to an AlwaysOn availability group (AG) on different subnets, setting MultiSubnetFailover provides faster detection of and connection to the (currently) active server. For more information about SqlClient support for Always On Availability Groups

    .PARAMETER NetworkProtocol
        Connect explicitly using 'TcpIp','NamedPipes','Multiprotocol','AppleTalk','BanyanVines','Via','SharedMemory' and 'NWLinkIpxSpx'

    .PARAMETER NonPooledConnection
        Request a non-pooled connection

    .PARAMETER PacketSize
        Sets the size in bytes of the network packets used to communicate with an instance of SQL Server. Must match at server.

    .PARAMETER PooledConnectionLifetime
        When a connection is returned to the pool, its creation time is compared with the current time, and the connection is destroyed if that time span (in seconds) exceeds the value specified by Connection Lifetime. This is useful in clustered configurations to force load balancing between a running server and a server just brought online.

        A value of zero (0) causes pooled connections to have the maximum connection timeout.

    .PARAMETER SqlExecutionModes
        The SqlExecutionModes enumeration contains values that are used to specify whether the commands sent to the referenced connection to the server are executed immediately or saved in a buffer.

        Valid values include CaptureSql, ExecuteAndCaptureSql and ExecuteSql.

    .PARAMETER StatementTimeout
        Sets the number of seconds a statement is given to run before failing with a time-out error.

    .PARAMETER TrustServerCertificate
        Sets a value that indicates whether the channel will be encrypted while bypassing walking the certificate chain to validate trust.

    .PARAMETER WorkstationId
        Sets the name of the workstation connecting to SQL Server.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .NOTES
        Tags: Connection, Connect, ConnectionString
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/New-DbaConnectionString

    .EXAMPLE
        PS C:\> New-DbaConnectionString -SqlInstance sql2014

        Creates a connection string that connects using Windows Authentication

    .EXAMPLE
        PS C:\> Connect-DbaInstance -SqlInstance sql2016 | New-DbaConnectionString

        Builds a connected SMO object using Connect-DbaInstance then extracts and displays the connection string

    .EXAMPLE
        PS C:\> $wincred = Get-Credential ad\sqladmin
        PS C:\> New-DbaConnectionString -SqlInstance sql2014 -Credential $wincred

        Creates a connection string that connects using alternative Windows credentials

    .EXAMPLE
        PS C:\> $sqlcred = Get-Credential sqladmin
        PS C:\> $server = New-DbaConnectionString -SqlInstance sql2014 -Credential $sqlcred

        Login to sql2014 as SQL login sqladmin.

    .EXAMPLE
        PS C:\> $server = New-DbaConnectionString -SqlInstance sql2014 -ClientName "mah connection"

        Creates a connection string that connects using Windows Authentication and uses the client name "mah connection". So when you open up profiler or use extended events, you can search for "mah connection".

    .EXAMPLE
        PS C:\> $server = New-DbaConnectionString -SqlInstance sql2014 -AppendConnectionString "Packet Size=4096;AttachDbFilename=C:\MyFolder\MyDataFile.mdf;User Instance=true;"

        Creates a connection string that connects to sql2014 using Windows Authentication, then it sets the packet size (this can also be done via -PacketSize) and other connection attributes.

    .EXAMPLE
        PS C:\> $server = New-DbaConnectionString -SqlInstance sql2014 -NetworkProtocol TcpIp -MultiSubnetFailover

        Creates a connection string with Windows Authentication that uses TCPIP and has MultiSubnetFailover enabled.

    .EXAMPLE
        PS C:\> $connstring = New-DbaConnectionString sql2016 -ApplicationIntent ReadOnly

        Creates a connection string with ReadOnly ApplicationIntent.

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [Parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("SqlCredential")]
        [PSCredential]$Credential,
        [string]$AccessToken,
        [ValidateSet('ReadOnly', 'ReadWrite')]
        [string]$ApplicationIntent,
        [string]$BatchSeparator,
        [string]$ClientName = "custom connection",
        [int]$ConnectTimeout,
        [switch]$EncryptConnection,
        [string]$FailoverPartner,
        [switch]$IsActiveDirectoryUniversalAuth,
        [int]$LockTimeout,
        [int]$MaxPoolSize,
        [int]$MinPoolSize,
        [switch]$MultipleActiveResultSets,
        [switch]$MultiSubnetFailover,
        [ValidateSet('TcpIp', 'NamedPipes', 'Multiprotocol', 'AppleTalk', 'BanyanVines', 'Via', 'SharedMemory', 'NWLinkIpxSpx')]
        [string]$NetworkProtocol,
        [switch]$NonPooledConnection,
        [int]$PacketSize,
        [int]$PooledConnectionLifetime,
        [ValidateSet('CaptureSql', 'ExecuteAndCaptureSql', 'ExecuteSql')]
        [string]$SqlExecutionModes,
        [int]$StatementTimeout,
        [switch]$TrustServerCertificate,
        [string]$WorkstationId,
        [string]$AppendConnectionString
    )

    process {
        foreach ($instance in $sqlinstance) {
            if ($Pscmdlet.ShouldProcess($instance, "Making a new Connection String")) {
                if ($instance.GetType() -eq [Microsoft.SqlServer.Management.Smo.Server]) {
                    return $instance.ConnectionContext.ConnectionString
                } else {
                    $guid = [System.Guid]::NewGuid()
                    $server = New-Object Microsoft.SqlServer.Management.Smo.Server $guid

                    if ($AppendConnectionString) {
                        $connstring = $server.ConnectionContext.ConnectionString
                        $server.ConnectionContext.ConnectionString = "$connstring;$appendconnectionstring"
                        $server.ConnectionContext.ConnectionString
                    } else {

                        $server.ConnectionContext.ApplicationName = $clientname

                        if ($AccessToken) { $server.ConnectionContext.AccessToken = $AccessToken }
                        if ($BatchSeparator) { $server.ConnectionContext.BatchSeparator = $BatchSeparator }
                        if ($ConnectTimeout) { $server.ConnectionContext.ConnectTimeout = $ConnectTimeout }
                        if ($Database) { $server.ConnectionContext.DatabaseName = $Database }
                        if ($EncryptConnection) { $server.ConnectionContext.EncryptConnection = $true }
                        if ($IsActiveDirectoryUniversalAuth) { $server.ConnectionContext.IsActiveDirectoryUniversalAuth = $true }
                        if ($LockTimeout) { $server.ConnectionContext.LockTimeout = $LockTimeout }
                        if ($MaxPoolSize) { $server.ConnectionContext.MaxPoolSize = $MaxPoolSize }
                        if ($MinPoolSize) { $server.ConnectionContext.MinPoolSize = $MinPoolSize }
                        if ($MultipleActiveResultSets) { $server.ConnectionContext.MultipleActiveResultSets = $true }
                        if ($NetworkProtocol) { $server.ConnectionContext.NetworkProtocol = $NetworkProtocol }
                        if ($NonPooledConnection) { $server.ConnectionContext.NonPooledConnection = $true }
                        if ($PacketSize) { $server.ConnectionContext.PacketSize = $PacketSize }
                        if ($PooledConnectionLifetime) { $server.ConnectionContext.PooledConnectionLifetime = $PooledConnectionLifetime }
                        if ($StatementTimeout) { $server.ConnectionContext.StatementTimeout = $StatementTimeout }
                        if ($SqlExecutionModes) { $server.ConnectionContext.SqlExecutionModes = $SqlExecutionModes }
                        if ($TrustServerCertificate) { $server.ConnectionContext.TrustServerCertificate = $true }
                        if ($WorkstationId) { $server.ConnectionContext.WorkstationId = $WorkstationId }

                        $connstring = $server.ConnectionContext.ConnectionString
                        if ($MultiSubnetFailover) { $connstring = "$connstring;MultiSubnetFailover=True" }
                        if ($FailoverPartner) { $connstring = "$connstring;Failover Partner=$FailoverPartner" }
                        if ($ApplicationIntent) { $connstring = "$connstring;ApplicationIntent=$ApplicationIntent;" }

                        if ($connstring -ne $server.ConnectionContext.ConnectionString) {
                            $server.ConnectionContext.ConnectionString = $connstring
                        }
                        if ($null -ne $Credential.username) {
                            $username = ($Credential.username).TrimStart("\")

                            if ($username -like "*\*") {
                                $username = $username.Split("\")[1]
                                #Variable marked as unused by PSScriptAnalyzer
                                #$authtype = "Windows Authentication with Credential"
                                $server.ConnectionContext.LoginSecure = $true
                                $server.ConnectionContext.ConnectAsUser = $true
                                $server.ConnectionContext.ConnectAsUserName = $username
                                $server.ConnectionContext.ConnectAsUserPassword = ($Credential).GetNetworkCredential().Password
                            } else {
                                #Variable marked as unused by PSScriptAnalyzer
                                #$authtype = "SQL Authentication"
                                $server.ConnectionContext.LoginSecure = $false
                                $server.ConnectionContext.set_Login($username)
                                $server.ConnectionContext.set_SecurePassword($Credential.Password)
                            }
                        }

                        ($server.ConnectionContext.ConnectionString).Replace($guid, $SqlInstance)
                    }
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias New-DbaSqlConnectionString
    }
}

tools\dbatools\functions\New-DbaConnectionStringBuilder.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function New-DbaConnectionStringBuilder {
    <#
    .SYNOPSIS
        Returns a System.Data.SqlClient.SqlConnectionStringBuilder with the string specified

    .DESCRIPTION
        Creates a System.Data.SqlClient.SqlConnectionStringBuilder from a connection string.

    .PARAMETER ConnectionString
        A Connection String

    .PARAMETER ApplicationName
        The application name to tell SQL Server the connection is associated with.

    .PARAMETER DataSource
        The Sql Server to connect to.

    .PARAMETER InitialCatalog
        The initial database on the server to connect to.

    .PARAMETER IntegratedSecurity
        Set to true to use windows authentication.

    .PARAMETER UserName
        Sql User Name to connect with.

    .PARAMETER Password
        Password to use to connect with.

    .PARAMETER MultipleActiveResultSets
        Enable Multiple Active Result Sets.

    .PARAMETER ColumnEncryptionSetting
        Enable Always Encrypted.

    .PARAMETER WorkstationID
        Set the Workstation Id that is associated with the connection.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .NOTES
        Tags: SqlBuild, ConnectionString, Connection
        Author: zippy1981 | Chrissy LeMaire (@cl)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/New-DbaConnectionStringBuilder

    .EXAMPLE
        PS C:\> New-DbaConnectionStringBuilder

        Returns an empty ConnectionStringBuilder

    .EXAMPLE
        PS C:\> "Data Source=localhost,1433;Initial Catalog=AlwaysEncryptedSample;UID=sa;PWD=alwaysB3Encrypt1ng;Application Name=Always Encrypted Sample MVC App;Column Encryption Setting=enabled" | New-DbaConnectionStringBuilder

        Returns a connection string builder that can be used to connect to the local sql server instance on the default port.

    #>
    [CmdletBinding(SupportsShouldProcess)]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSAvoidUsingPlainTextForPassword", "")]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSAvoidUsingUserNameAndPassWordParams", "")]
    param (
        [Parameter(ValueFromPipeline)]
        [string[]]$ConnectionString = "",
        [string]$ApplicationName = "dbatools Powershell Module",
        [string]$DataSource = $null,
        [string]$InitialCatalog = $null,
        [Nullable[bool]]$IntegratedSecurity = $null,
        [string]$UserName = $null,
        # No point in securestring here, the memory is never stored securely in memory.
        [string]$Password = $null,
        [Alias('MARS')]
        [switch]$MultipleActiveResultSets,
        [Alias('AlwaysEncrypted')]
        [Data.SqlClient.SqlConnectionColumnEncryptionSetting]$ColumnEncryptionSetting =
        [Data.SqlClient.SqlConnectionColumnEncryptionSetting]::Enabled,
        [string]$WorkstationId = $env:COMPUTERNAME
    )
    process {
        foreach ($cs in $ConnectionString) {
            if ($Pscmdlet.ShouldProcess($cs, "Creating new connection string")) {
                $builder = New-Object Data.SqlClient.SqlConnectionStringBuilder $cs
                if ($builder.ApplicationName -eq ".Net SqlClient Data Provider") {
                    $builder['Application Name'] = $ApplicationName
                }
                if (![string]::IsNullOrWhiteSpace($DataSource)) {
                    $builder['Data Source'] = $DataSource
                }
                if (![string]::IsNullOrWhiteSpace($InitialCatalog)) {
                    $builder['Initial Catalog'] = $InitialCatalog
                }
                if (![string]::IsNullOrWhiteSpace($IntegratedSecurity)) {
                    $builder['Integrated Security'] = $IntegratedSecurity
                }
                if (![string]::IsNullOrWhiteSpace($UserName)) {
                    $builder["User ID"] = $UserName
                }
                if (![string]::IsNullOrWhiteSpace($Password)) {
                    $builder['Password'] = $Password
                }
                if (![string]::IsNullOrWhiteSpace($WorkstationId)) {
                    $builder['Workstation ID'] = $WorkstationId
                }
                if ($MultipleActiveResultSets -eq $true) {
                    $builder['MultipleActiveResultSets'] = $true
                }
                if ($ColumnEncryptionSetting -eq [Data.SqlClient.SqlConnectionColumnEncryptionSetting]::Enabled) {
                    $builder['Column Encryption Setting'] = [Data.SqlClient.SqlConnectionColumnEncryptionSetting]::Enabled
                }
                $builder
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias New-DbaSqlConnectionStringBuilder
    }
}

tools\dbatools\functions\New-DbaCredential.ps1

function New-DbaCredential {
    <#
    .SYNOPSIS
        Creates a new SQL Server credential

    .DESCRIPTION
        Creates a new credential

    .PARAMETER SqlInstance
        The target SQL Server(s)

    .PARAMETER SqlCredential
        Allows you to login to SQL Server using alternative credentials

    .PARAMETER Name
        The Credential name

    .PARAMETER Identity
        The Credential Identity

    .PARAMETER SecurePassword
        Secure string used to authenticate the Credential Identity

    .PARAMETER MappedClassType
        Sets the class associated with the credential.

    .PARAMETER ProviderName
        Sets the name of the provider

    .PARAMETER Force
        If credential exists, drop and recreate

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Certificate
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> New-DbaCredential -SqlInstance Server1

        You will be prompted to securely enter your password, then a credential will be created in the master database on server1 if it does not exist.

    .EXAMPLE
        PS C:\> New-DbaCredential -SqlInstance Server1 -Confirm:$false

        Suppresses all prompts to install but prompts to securely enter your password and creates a credential on Server1.

    .EXAMPLE
        PS C:\> New-DbaCredential -SqlInstance Server1 -Name AzureBackupBlobStore -Identity '<Azure Storage Account Name>' -SecurePassword (ConvertTo-SecureString '<Azure Storage Account Access Key>' -AsPlainText -Force)

        Create credential on SQL Server 2012 CU2, SQL Server 2014 for use with BACKUP TO URL.
        CredentialIdentity needs to be supplied with the Azure Storage Account Name.
        Password needs to be one of the Access Keys for the account.

    .EXAMPLE
        PS C:\> New-DbaCredential -SqlInstance Server1 -Name 'https://<Azure Storage Account Name>.blob.core.windows.net/<Blob Store Container Name>' -Identity 'SHARED ACCESS SIGNATURE' -SecurePassword (ConvertTo-SecureString '<Shared Access Token>' -AsPlainText -Force)

        Create Credential on SQL Server 2016 or higher for use with BACKUP TO URL.
        Name has to be the full URL for the blob store container that will be the backup target.
        Password needs to be passed the Shared Access Token (SAS Key).

    #>
    [CmdletBinding(SupportsShouldProcess)] #, ConfirmImpact = "High"
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [object[]]$Name = $Identity,
        [parameter(Mandatory)]
        [Alias("CredentialIdentity")]
        [string[]]$Identity,
        [Alias("Password")]
        [Security.SecureString]$SecurePassword,
        [ValidateSet('CryptographicProvider', 'None')]
        [string]$MappedClassType = "None",
        [string]$ProviderName,
        [switch]$Force,
        [switch]$EnableException
    )

    begin {
        $mappedclass = switch ($MappedClassType) {
            "CryptographicProvider" { 1 }
            "None" { 0 }
        }
    }

    process {
        if (!$SecurePassword) {
            Read-Host -AsSecureString -Prompt "Enter the credential password"
        }

        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            foreach ($cred in $Identity) {
                $currentcred = $server.Credentials[$name]

                if ($currentcred) {
                    if ($force) {
                        Write-Message -Level Verbose -Message "Dropping credential $name"
                        $currentcred.Drop()
                    } else {
                        Stop-Function -Message "Credential exists and Force was not specified" -Target $name -Continue
                    }
                }


                if ($Pscmdlet.ShouldProcess($SqlInstance, "Creating credential for database '$cred' on $instance")) {
                    try {
                        $credential = New-Object Microsoft.SqlServer.Management.Smo.Credential -ArgumentList $server, $name
                        $credential.MappedClassType = $mappedclass
                        $credential.ProviderName = $ProviderName
                        $credential.Create($Identity, $SecurePassword)

                        Add-Member -Force -InputObject $credential -MemberType NoteProperty -Name ComputerName -value $server.ComputerName
                        Add-Member -Force -InputObject $credential -MemberType NoteProperty -Name InstanceName -value $server.ServiceName
                        Add-Member -Force -InputObject $credential -MemberType NoteProperty -Name SqlInstance -value $server.DomainInstanceName

                        Select-DefaultView -InputObject $credential -Property ComputerName, InstanceName, SqlInstance, Name, Identity, CreateDate, MappedClassType, ProviderName
                    } catch {
                        Stop-Function -Message "Failed to create credential in $cred on $instance. Exception: $($_.Exception.InnerException)" -Target $credential -InnerErrorRecord $_ -Continue
                    }
                }
            }
        }
    }
}

tools\dbatools\functions\New-DbaDacOption.ps1

function New-DbaDacOption {
    <#
    .SYNOPSIS
        Creates a new Microsoft.SqlServer.Dac.DacExtractOptions/DacExportOptions object depending on the chosen Type

    .DESCRIPTION
        Creates a new Microsoft.SqlServer.Dac.DacExtractOptions/DacExportOptions object that can be used during DacPackage extract. Basically saves you the time from remembering the SMO assembly name ;)

        See:
        https://msdn.microsoft.com/en-us/library/microsoft.sqlserver.dac.dacexportoptions.aspx
        https://msdn.microsoft.com/en-us/library/microsoft.sqlserver.dac.dacextractoptions.aspx
        for more information

    .PARAMETER Type
        Selecting the type of the export: Dacpac (default) or Bacpac.

    .PARAMETER Action
        Choosing an intended action: Publish or Export.

    .PARAMETER PublishXml
        Specifies the publish profile which will include options and sqlCmdVariables.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Migration, Database, Dacpac
        Author: Kirill Kravtsov (@nvarscar), nvarscar.wordpress.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/New-DbaDacOption

    .EXAMPLE
        PS C:\> $options = New-DbaDacOption -Type Dacpac -Action Export
        PS C:\> $options.ExtractAllTableData = $true
        PS C:\> $options.CommandTimeout = 0
        PS C:\> Export-DbaDacPackage -SqlInstance sql2016 -Database DB1 -Options $options

        Uses DacOption object to set the CommandTimeout to 0 then extracts the dacpac for SharePoint_Config on sql2016 to C:\temp\SharePoint_Config.dacpac including all table data.

    .EXAMPLE
        PS C:\> $options = New-DbaDacOption -Type Dacpac -Action Publish
        PS C:\> $options.DeployOptions.DropObjectsNotInSource = $true
        PS C:\> Publish-DbaDacPackage -SqlInstance sql2016 -Database DB1 -Options $options -Path c:\temp\db.dacpac

        Uses DacOption object to set Deployment Options and publish the db.dacpac dacpac file as DB1 on sql2016

    #>
    [CmdletBinding(SupportsShouldProcess)]
    Param (
        [ValidateSet('Dacpac', 'Bacpac')]
        [string]$Type = 'Dacpac',
        [Parameter(Mandatory)]
        [ValidateSet('Publish', 'Export')]
        [string]$Action,
        [string]$PublishXml,
        [switch]$EnableException
    )
    if ($PScmdlet.ShouldProcess("$type", "Creating New DacOptions of $action")) {
        if (-not $script:core) {
            $dacfxPath = "$script:PSModuleRoot\bin\smo\Microsoft.SqlServer.Dac.dll"
            if ((Test-Path $dacfxPath) -eq $false) {
                Stop-Function -Message 'Dac Fx library not found.' -EnableException $EnableException
                return
            } else {
                try {
                    Add-Type -Path $dacfxPath
                    Write-Message -Level Verbose -Message "Dac Fx loaded."
                } catch {
                    Stop-Function -Message 'No usable version of Dac Fx found.' -ErrorRecord $_
                    return
                }
            }
        }
        
        # Pick proper option object depending on type and action
        if ($Action -eq 'Export') {
            if ($Type -eq 'Dacpac') {
                New-Object -TypeName Microsoft.SqlServer.Dac.DacExtractOptions
            } elseif ($Type -eq 'Bacpac') {
                New-Object -TypeName Microsoft.SqlServer.Dac.DacExportOptions
            }
        } elseif ($Action -eq 'Publish') {
            if ($Type -eq 'Dacpac') {
                $output = New-Object -TypeName Microsoft.SqlServer.Dac.PublishOptions
                if ($PublishXml) {
                    try {
                        $dacProfile = [Microsoft.SqlServer.Dac.DacProfile]::Load($PublishXml)
                        $output.DeployOptions = $dacProfile.DeployOptions
                    } catch {
                        Stop-Function -Message "Could not load profile." -ErrorRecord $_
                        return
                    }
                } else {
                    $output.DeployOptions = New-Object -TypeName Microsoft.SqlServer.Dac.DacDeployOptions
                }
                $output.GenerateDeploymentScript = $false
                $output
            } elseif ($Type -eq 'Bacpac') {
                New-Object -TypeName Microsoft.SqlServer.Dac.DacImportOptions
            }
        }
    }
}

tools\dbatools\functions\New-DbaDacProfile.ps1

function New-DbaDacProfile {
    <#
    .SYNOPSIS
        Creates a new Publish Profile.

    .DESCRIPTION
        The New-DbaDacProfile command generates a standard publish profile xml file that can be used by the DacFx (this and everything else) to control the deployment of your dacpac
        This generates a standard template XML which is enough to dpeloy a dacpac but it is highly recommended that you add additional options to the publish profile.
        If you use Visual Studio you can open a publish.xml file and use the ui to edit the file -
        To create a new file, right click on an SSDT project, choose "Publish" then "Load Profile" and load your profile or create a new one.
        Once you have loaded it in Visual Studio, clicking advanced shows you the list of options available to you.
        For a full list of options that you can add to the profile, google "sqlpackage.exe command line switches" or (https://msdn.microsoft.com/en-us/library/hh550080(v=vs.103).aspx)

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. Alternatively, you can provide a ConnectionString.

    .PARAMETER SqlCredential
        Allows you to login to servers using alternative logins instead Integrated, accepts Credential object created by Get-Credential

    .PARAMETER Database
        The database name you are targeting

    .PARAMETER ConnectionString
        The connection string to the database you are upgrading.

        Alternatively, you can provide a SqlInstance (and optionally SqlCredential) and the script will connect and generate the connectionstring.

    .PARAMETER Path
        The directory where you would like to save the profile xml file(s).

    .PARAMETER PublishOptions
        Optional hashtable to set publish options. Key/value pairs in the hashtable get converted to strings of "<key>value</key>".

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Dacpac
        Author: Richie lee (@richiebzzzt)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/New-DbaDacProfile

    .EXAMPLE
        PS C:\> New-DbaDacProfile -SqlInstance sql2017 -SqlCredential ad\sqldba -Database WorldWideImporters -Path C:\temp

        In this example, a prompt will appear for alternative credentials, then a connection will be made to sql2017. Using that connection,
        the ConnectionString will be extracted and used within the Publish Profile XML file which will be created at C:\temp\sql2017-WorldWideImporters-publish.xml

    .EXAMPLE
        PS C:\> New-DbaDacProfile -Database WorldWideImporters -Path C:\temp -ConnectionString "SERVER=(localdb)\MSSQLLocalDB;Integrated Security=True;Database=master"

        In this example, no connections are made, and a Publish Profile XML would be created at C:\temp\localdb-MSSQLLocalDB-WorldWideImporters-publish.xml

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [parameter(ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstance[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [Parameter(Mandatory)]
        [string[]]$Database,
        [string]$Path = "$home\Documents",
        [string[]]$ConnectionString,
        [hashtable]$PublishOptions,
        [switch]$EnableException
    )
    begin {
        if ((Test-Bound -Not -ParameterName SqlInstance) -and (Test-Bound -Not -ParameterName ConnectionString)) {
            Stop-Function -Message "You must specify either SqlInstance or ConnectionString"
        }

        if (-not (Test-Path $Path)) {
            Stop-Function -Message "$Path doesn't exist or access denied"
        }

        if ((Get-Item $path) -isnot [System.IO.DirectoryInfo]) {
            Stop-Function -Message "Path must be a directory"
        }

        function Convert-HashtableToXMLString($PublishOptions) {
            $return = @()
            if ($PublishOptions) {
                $PublishOptions.GetEnumerator() | ForEach-Object {
                    $key = $PSItem.Key.ToString()
                    $value = $PSItem.Value.ToString()
                    $return += "<$key>$value</$key>"
                }
            }
            $return | Out-String
        }

        function Get-Template ($db, $connstring) {
            "<?xml version=""1.0"" ?>
            <Project ToolsVersion=""14.0"" xmlns=""http://schemas.microsoft.com/developer/msbuild/2003"">
              <PropertyGroup>
                <TargetDatabaseName>{0}</TargetDatabaseName>
                <TargetConnectionString>{1}</TargetConnectionString>
                <ProfileVersionNumber>1</ProfileVersionNumber>
                {2}
              </PropertyGroup>
            </Project>" -f $db[0], $connstring, $(Convert-HashtableToXMLString($PublishOptions))
        }

        function Get-ServerName ($connstring) {
            $builder = New-Object System.Data.Common.DbConnectionStringBuilder
            $builder.set_ConnectionString($connstring)
            $instance = $builder['data source']

            if (-not $instance) {
                $instance = $builder['server']
            }

            return $instance.ToString().Replace('\', '--')
        }
    }
    process {
        if (Test-FunctionInterrupt) { return }

        foreach ($instance in $sqlinstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $ConnectionString += $server.ConnectionContext.ConnectionString.Replace(';Application Name="dbatools PowerShell module - dbatools.io"', '')

        }

        foreach ($connstring in $ConnectionString) {
            foreach ($db in $Database) {
                if ($Pscmdlet.ShouldProcess($db, "Creating new DAC Profile")) {
                    $profileTemplate = Get-Template $db, $connstring
                    $instancename = Get-ServerName $connstring

                    try {
                        $server = [DbaInstance]($instancename.ToString().Replace('--', '\'))
                        $PublishProfile = Join-Path $Path "$($instancename.Replace('--','-'))-$db-publish.xml" -ErrorAction Stop
                        Write-Message -Level Verbose -Message "Writing to $PublishProfile"
                        $profileTemplate | Out-File $PublishProfile -ErrorAction Stop
                        [pscustomobject]@{
                            ComputerName     = $server.ComputerName
                            InstanceName     = $server.InstanceName
                            SqlInstance      = $server.FullName
                            Database         = $db
                            FileName         = $PublishProfile
                            ConnectionString = $connstring
                            ProfileTemplate  = $profileTemplate
                        } | Select-DefaultView -ExcludeProperty ComputerName, InstanceName, ProfileTemplate
                    } catch {
                        Stop-Function -ErrorRecord $_ -Message "Failure" -Target $instancename -Continue
                    }
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias New-DbaPublishProfile
    }
}

tools\dbatools\functions\New-DbaDatabase.ps1

#ValidationTags#CodeStyle,Messaging,FlowControl,Pipeline#
function New-DbaDatabase {
    <#
    .SYNOPSIS
        Creates a new database

    .DESCRIPTION
        This command creates a new database.

        It allows creation with multiple files, and sets all growth settings to be fixed size rather than percentage growth.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Name
        The name of the new database or databases to be created.

    .PARAMETER DataFilePath
        The location that data files will be placed, otherwise the default SQL Server data path will be used.

    .PARAMETER LogFilePath
        The location the log file will be placed, otherwise the default SQL Server log path will be used.

    .PARAMETER Collation
        The database collation, if not supplied the default server collation will be used.

    .PARAMETER Recoverymodel
        The recovery model for the database, if not supplied the recovery model from the model database will be used.

    .PARAMETER Owner
        The login that will be used as the database owner.

    .PARAMETER PrimaryFilesize
        The size in MB for the Primary file. If this is less than the primary file size for the model database, then the model size will be used instead.

    .PARAMETER PrimaryFileGrowth
        The size in MB that the Primary file will autogrow by.

    .PARAMETER PrimaryFileMaxSize
        The maximum permitted size in MB for the Primary File. If this is less the primary file size for the model database, then the model size will be used instead.

    .PARAMETER LogSize
        The size in MB that the Transaction log will be created.

    .PARAMETER LogGrowth
        The amount in MB that the log file will be set to autogrow by.

    .PARAMETER SecondaryFileCount
        The number of files to create in the Secondary filegroup for the database.

    .PARAMETER SecondaryFilesize
        The size in MB of the files to be added to the Secondary filegroup. Each file added will be created with this size setting.

    .PARAMETER SecondaryFileMaxSize
        The maximum permitted size in MB for the Secondary data files to grow to. Each file added will be created with this max size setting.

    .PARAMETER SecondaryFileGrowth
        The amount in MB that the Secondary files will be set to autogrow by. Use 0 for no growth allowed. Each file added will be created with this growth setting.

    .PARAMETER DefaultFileGroup
        Sets the default file group. Either primary or secondary.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Database
        Author: Matthew Darwin (@evoDBA, naturalselectiondba.wordpress.com)  | Chrissy LeMaire (@cl)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/New-DbaDatabase

    .EXAMPLE
        New-DbaDatabase -SqlInstance sql1

        Creates a randomly named database (random-N) on instance sql1

    .EXAMPLE
        New-DbaDatabase -SqlInstance sql1 -Name dbatools, dbachecks

        Creates a database named dbatools and a database named dbachecks on sql1

    .EXAMPLE
        New-DbaDatabase -SqlInstance sql1, sql2, sql3 -Name multidb, multidb2 -SecondaryFilesize 20 -SecondaryFileGrowth 20 -LogSize 20 -LogGrowth 20

        Creates two databases, multidb and multidb2, on 3 instances (sql1, sql2 and sql3) and sets the secondary data file size to 20MB, the file growth to 20MB and the log growth to 20MB for each

    .EXAMPLE
        New-DbaDatabase -SqlInstance sql1 -Name nondefault -DataFilePath M:\Data -LogFilePath 'L:\Logs with spaces' -SecondaryFileCount 2

        Creates a database named nondefault and places data files in in the M:\data directory and log files in "L:\Logs with spaces".

        Creates a secondary group with 2 files in the Secondary filegroup.

          #>
    [Cmdletbinding(SupportsShouldProcess, ConfirmImpact = "Low")]
    param
    (
        [parameter(Mandatory, ValueFromPipeline)]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$Name,
        [string]$Collation,
        [string]$Recoverymodel,
        [string]$Owner,
        [string]$DataFilePath,
        [string]$LogFilePath,
        [int32]$PrimaryFilesize,
        [int32]$PrimaryFileGrowth,
        [int32]$PrimaryFileMaxSize,
        [int32]$LogSize,
        [int32]$LogGrowth,
        [int32]$SecondaryFilesize,
        [int32]$SecondaryFileGrowth,
        [int32]$SecondaryFileMaxSize,
        [int32]$SecondaryFileCount,
        [ValidateSet('Primary', 'Secondary')]
        [string]$DefaultFileGroup,
        [switch]$EnableException
    )

    begin {
        # do some checks to see if the advanced config settings will be invoked
        if (Test-Bound -ParameterName DataFilePath, LogFilePath, DefaultFileGroup) {
            $advancedconfig = $true
        }

        if (Test-Bound -ParameterName PrimaryFilesize, PrimaryFileGrowth, PrimaryFileMaxSize) {
            $advancedconfig = $true
        }

        if (Test-Bound -ParameterName LogSize, LogGrowth) {
            $advancedconfig = $true
        }

        if (Test-Bound -ParameterName SecondaryFilesize, SecondaryFileMaxSize, SecondaryFileGrowth, SecondaryFileCount) {
            $advancedconfig = $true
        }

        if ($advancedconfig) {
            Write-Message -Message "Advanced data file configuration will be invoked" -Level Verbose
        }
    }

    process {
        if (Test-FunctionInterrupt) {
            return
        }

        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            if ($advancedconfig -and $server.VersionMajor -eq 8) {
                Stop-Function -Message "Advanced configuration options are not available to SQL Server 2000. Aborting creation of database on $instance" -Target $instance -Continue
            }

            if (-not (Test-Bound -ParameterName Name)) {
                $Name = "random-$(Get-Random)"
            }

            if (-not (Test-Bound -ParameterName DataFilePath)) {
                $DataFilePath = (Get-DbaDefaultPath -SqlInstance $server).Data
            }

            if (-not (Test-Bound -ParameterName LogFilePath)) {
                $LogFilePath = (Get-DbaDefaultPath -SqlInstance $server).Log
            }

            if (-not (Test-DbaPath -SqlInstance $server -Path $LogFilePath)) {
                try {
                    Write-Message -Message "Creating directory $LogFilePath" -Level Verbose
                    $null = New-DbaDirectory -SqlInstance $server -Path $LogFilePath -EnableException
                } catch {
                    Stop-Function -Message "Error creating log file directory $LogFilePath" -Target $instance -Continue
                }
            }

            if (-not (Test-DbaPath -SqlInstance $server -Path $DataFilePath)) {
                try {
                    Write-Message -Message "Creating directory $DataFilePath" -Level Verbose
                    $null = New-DbaDirectory -SqlInstance $server -Path $DataFilePath -EnableException
                } catch {
                    Stop-Function -Message "Error creating secondary file directory $DataFilePath on $instance" -Target $instance -Continue
                }
            }

            Write-Message -Message "Set local data path to $DataFilePath and local log path to $LogFilePath" -Level Verbose

            foreach ($dbname in $Name) {
                if ($server.Databases[$dbname].Name) {
                    Stop-Function -Message "Database $dbname already exists on $instance" -Target $instance -Continue
                }

                try {
                    Write-Message -Message "Creating smo object for new database $dbname" -Level Verbose
                    $newdb = New-Object Microsoft.SqlServer.Management.Smo.Database($server, $dbname)
                } catch {
                    Stop-Function -Message "Error creating database object for $dbname on server $server" -ErrorRecord $_ -Target $instance -Continue
                }

                if ($Collation) {
                    Write-Message -Message "Setting collation to $Collation" -Level Verbose
                    $newdb.Collation = $Collation
                }

                if ($Recoverymodel) {
                    Write-Message -Message "Setting recovery model to $Recoverymodel" -Level Verbose
                    $newdb.Recoverymodel = $Recoverymodel
                }

                if ($advancedconfig) {
                    try {
                        Write-Message -Message "Creating PRIMARY filegroup" -Level Verbose
                        $primaryfg = New-Object Microsoft.SqlServer.Management.Smo.Filegroup($newdb, "PRIMARY")
                        $newdb.Filegroups.Add($primaryfg)
                    } catch {
                        Stop-Function -Message "Error creating Primary filegroup object" -ErrorRecord $_ -Target $instance -Continue
                    }

                    #add the primary file
                    try {
                        $primaryfilename = $dbname + "_PRIMARY"
                        Write-Message -Message "Creating file name $primaryfilename in filegroup PRIMARY" -Level Verbose

                        #check the size of the modeldev file; if larger than our $PrimaryFilesize setting use that instead
                        if ($server.Databases["model"].FileGroups["PRIMARY"].Files["modeldev"].Size -gt ($PrimaryFilesize * 1024)) {
                            Write-Message -Message "model database modeldev larger than our the PrimaryFilesize so using modeldev size for Primary file" -Level Verbose
                            $PrimaryFilesize = ($server.Databases["model"].FileGroups["PRIMARY"].Files["modeldev"].Size / 1024)
                            if ($PrimaryFilesize -gt $PrimaryFileMaxSize) {
                                Write-Message -Message "Resetting Primary File Max size to be the new Primary File Size setting" -Level Verbose
                                $PrimaryFileMaxSize = $PrimaryFilesize
                            }
                        }

                        #create the filegroup object
                        $primaryfile = New-Object Microsoft.SqlServer.Management.Smo.DataFile($primaryfg, $primaryfilename)
                        $primaryfile.FileName = $DataFilePath + "\" + $primaryfilename + ".mdf"
                        $primaryfile.IsPrimaryFile = $true

                        if (Test-Bound -ParameterName PrimaryFilesize) {
                            $primaryfile.Size = ($PrimaryFilesize * 1024)
                        }
                        if (Test-Bound -ParameterName PrimaryFileGrowth) {
                            $primaryfile.Growth = ($PrimaryFileGrowth * 1024)
                            $primaryfile.GrowthType = "KB"
                        }
                        if (Test-Bound -ParameterName PrimaryFileMaxSize) {
                            $primaryfile.MaxSize = ($PrimaryFileMaxSize * 1024)
                        }

                        #add the file to the filegroup
                        $primaryfg.Files.Add($primaryfile)
                    } catch {
                        Stop-Function -Message "Error adding file to Primary filegroup" -ErrorRecord $_ -Target $instance -Continue
                    }

                    try {
                        $logname = $dbname + "_Log"
                        Write-Message -Message "Creating log $logname" -Level Verbose

                        #check the size of the modellog file; if larger than our $LogSize setting use that instead
                        if ($server.Databases["model"].LogFiles["modellog"].Size -gt ($LogSize * 1024)) {
                            Write-Message -Message "model database modellog larger than our the LogSize so using modellog size for Log file size" -Level Verbose
                            $LogSize = ($server.Databases["model"].LogFiles["modellog"].Size / 1024)
                        }

                        $tlog = New-Object Microsoft.SqlServer.Management.Smo.LogFile($newdb, $logname)
                        $tlog.FileName = $LogFilePath + "\" + $logname + ".ldf"

                        if (Test-Bound -ParameterName LogSize) {
                            $tlog.Size = ($LogSize * 1024)
                        }
                        if (Test-Bound -ParameterName LogGrowth) {
                            $tlog.Growth = ($LogGrowth * 1024)
                            $tlog.GrowthType = "KB"
                        }

                        #add the log to the db
                        $newdb.LogFiles.Add($tlog)
                    } catch {
                        Stop-Function -Message "Error adding log file to database." -ErrorRecord $_ -Target $instance -Continue
                    }

                    if (Test-Bound -ParameterName SecondaryFileMaxSize, SecondaryFileGrowth, SecondaryFilesize) {
                        #add the Secondary data file group
                        try {
                            $secondaryfilegroupname = $dbname + "_MainData"
                            Write-Message -Message "Creating Secondary filegroup $secondaryfilegroupname" -Level Verbose

                            $secondaryfg = New-Object Microsoft.SqlServer.Management.Smo.Filegroup($newdb, $secondaryfilegroupname)
                            $newdb.Filegroups.Add($secondaryfg)
                        } catch {
                            Stop-Function -Message "Error creating Secondary filegroup" -ErrorRecord $_ -Target $instance -Continue
                        }

                        # add the required number of files to the filegroup in a loop
                        $secondaryfgcount = $bail = 0

                        # open a loop while the filecounter is less than the required number of files
                        do {
                            $secondaryfgcount++
                            try {
                                $secondaryfilename = "$($secondaryfilegroupname)_$($secondaryfgcount)"
                                Write-Message -Message "Creating file name $secondaryfilename in filegroup $secondaryfilegroupname" -Level Verbose
                                $secondaryfile = New-Object Microsoft.SQLServer.Management.Smo.Datafile($secondaryfg, $secondaryfilename)
                                $secondaryfile.FileName = $DataFilePath + "\" + $secondaryfilename + ".ndf"

                                if (Test-Bound -ParameterName SecondaryFilesize) {
                                    $secondaryfile.Size = ($SecondaryFilesize * 1024)
                                }
                                if (Test-Bound -ParameterName SecondaryFileGrowth) {
                                    $secondaryfile.Growth = ($SecondaryFileGrowth * 1024)
                                    $secondaryfile.GrowthType = "KB"
                                }
                                if (Test-Bound -ParameterName SecondaryFileMaxSize) {
                                    $secondaryfile.MaxSize = ($SecondaryFileMaxSize * 1024)
                                }

                                $secondaryfg.Files.Add($secondaryfile)
                            } catch {
                                $bail = $true
                                Stop-Function -Message "Error adding file $secondaryfg to $secondaryfilegroupname" -ErrorRecord $_ -Target $instance
                                return
                            }
                        } while ($secondaryfgcount -le $SecondaryFileCount -or $bail)
                    }
                }

                Write-Message -Message "Creating Database $dbname" -Level Verbose
                if ($PSCmdlet.ShouldProcess($instance, "Creating the database $dbname on instance $instance")) {
                    try {
                        $newdb.Create()
                    } catch {
                        Stop-Function -Message "Error creating Database $dbname on server $instance" -ErrorRecord $_ -Target $instance -Continue
                    }

                    if ($Owner) {
                        Write-Message -Message "Setting database owner to $Owner" -Level Verbose
                        try {
                            $newdb.SetOwner($Owner)
                        } catch {
                            Stop-Function -Message "Error setting Database Owner to $Owner" -ErrorRecord $_ -Target $instance -Continue
                        }
                    }

                    if ($DefaultFileGroup -eq "Secondary") {
                        Write-Message -Message "Setting default filegroup to $secondaryfilegroupname" -Level Verbose
                        try {
                            $newdb.SetDefaultFileGroup($secondaryfilegroupname)
                        } catch {
                            Stop-Function -Message "Error setting default filegorup to $secondaryfilegroupname" -ErrorRecord $_ -Target $instance -Continue
                        }
                    }

                    Get-DbaDatabase -SqlInstance $server -Database $dbname
                }
            }
        }
    }
}

tools\dbatools\functions\New-DbaDbCertificate.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function New-DbaDbCertificate {
    <#
    .SYNOPSIS
        Creates a new database certificate

    .DESCRIPTION
        Creates a new database certificate. If no database is specified, the certificate will be created in master.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Allows you to login to SQL Server using alternative credentials.

    .PARAMETER Database
        The database where the certificate will be created. Defaults to master.

    .PARAMETER Name
        Optional name to create the certificate. Defaults to database name.

    .PARAMETER Subject
        Optional subject to create the certificate.

    .PARAMETER StartDate
        Optional secure string used to create the certificate.

    .PARAMETER ExpirationDate
        Optional secure string used to create the certificate.

    .PARAMETER ActiveForServiceBrokerDialog
        Optional secure string used to create the certificate.

    .PARAMETER SecurePassword
        Optional password - if no password is supplied, the password will be protected by the master key

    .PARAMETER InputObject
        Enables piping from Get-DbaDatabase

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Certificate
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> New-DbaDbCertificate -SqlInstance Server1

        You will be prompted to securely enter your password, then a certificate will be created in the master database on server1 if it does not exist.

    .EXAMPLE
        PS C:\> New-DbaDbCertificate -SqlInstance Server1 -Database db1 -Confirm:$false

        Suppresses all prompts to install but prompts to securely enter your password and creates a certificate in the 'db1' database

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "Low")]
    param (
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$Name,
        [string[]]$Database = "master",
        [string[]]$Subject,
        [datetime]$StartDate = (Get-Date),
        [datetime]$ExpirationDate = $StartDate.AddYears(5),
        [switch]$ActiveForServiceBrokerDialog,
        [Alias("Password")]
        [Security.SecureString]$SecurePassword,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Database[]]$InputObject,
        [switch]$EnableException
    )
    begin {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias New-DbaDatabaseCertificate
    }
    process {
        if ($SqlInstance) {
            $InputObject += Get-DbaDatabase -SqlInstance $SqlInstance -SqlCredential $SqlCredential -Database $Database
        }

        foreach ($db in $InputObject) {
            if ((Test-Bound -Not -ParameterName Name)) {
                Write-Message -Level Verbose -Message "Name of certificate not specified, setting it to '$db'"
                $Name = $db.Name
            }

            if ((Test-Bound -Not -ParameterName Subject)) {
                Write-Message -Level Verbose -Message "Subject not specified, setting it to '$Name Database Certificate'"
                $subject = "$Name Database Certificate"
            }

            foreach ($cert in $Name) {
                if ($null -ne $db.Certificates[$cert]) {
                    Stop-Function -Message "Certificate '$cert' already exists in $($db.Name) on $($db.Parent.Name)" -Target $db -Continue
                }

                if ($Pscmdlet.ShouldProcess($db.Parent.Name, "Creating certificate for database '$($db.Name)'")) {

                    # something is up with .net, force a stop
                    $eap = $ErrorActionPreference
                    $ErrorActionPreference = 'Stop'
                    try {
                        $smocert = New-Object -TypeName Microsoft.SqlServer.Management.Smo.Certificate $db, $cert
                        $smocert.StartDate = $StartDate
                        $smocert.Subject = $Subject
                        $smocert.ExpirationDate = $ExpirationDate
                        $smocert.ActiveForServiceBrokerDialog = $ActiveForServiceBrokerDialog

                        if ($SecurePassword) {
                            $smocert.Create(([System.Runtime.InteropServices.marshal]::PtrToStringAuto([System.Runtime.InteropServices.marshal]::SecureStringToBSTR($SecurePassword))))
                        } else {
                            $smocert.Create()
                        }

                        Add-Member -Force -InputObject $smocert -MemberType NoteProperty -Name ComputerName -value $db.Parent.ComputerName
                        Add-Member -Force -InputObject $smocert -MemberType NoteProperty -Name InstanceName -value $db.Parent.ServiceName
                        Add-Member -Force -InputObject $smocert -MemberType NoteProperty -Name SqlInstance -value $db.Parent.DomainInstanceName
                        Add-Member -Force -InputObject $smocert -MemberType NoteProperty -Name Database -value $db.Name

                        Select-DefaultView -InputObject $smocert -Property ComputerName, InstanceName, SqlInstance, Database, Name, Subject, StartDate, ActiveForServiceBrokerDialog, ExpirationDate, Issuer, LastBackupDate, Owner, PrivateKeyEncryptionType, Serial
                    } catch {
                        $ErrorActionPreference = $eap
                        Stop-Function -Message "Failed to create certificate in $($db.Name) on $($db.Parent.Name)" -Target $smocert -ErrorRecord $_ -Continue
                    }
                    $ErrorActionPreference = $eap
                }
            }
        }
    }
}

tools\dbatools\functions\New-DbaDbMasterKey.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function New-DbaDbMasterKey {
    <#
    .SYNOPSIS
        Creates a new database master key

    .DESCRIPTION
        Creates a new database master key. If no database is specified, the master key will be created in master.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Allows you to login to SQL Server using alternative credentials.

    .PARAMETER Credential
        Enables easy creation of a secure password.

    .PARAMETER Database
        The database where the master key will be created. Defaults to master.

    .PARAMETER SecurePassword
        Secure string used to create the key.

    .PARAMETER InputObject
        Database object piped in from Get-DbaDatabase.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Certificate
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> New-DbaDbMasterKey -SqlInstance Server1

        You will be prompted to securely enter your password, then a master key will be created in the master database on server1 if it does not exist.


    .EXAMPLE
        PS C:\> New-DbaDbMasterKey -SqlInstance Server1 -Credential usernamedoesntmatter

        You will be prompted by a credential interface to securely enter your password, then a master key will be created in the master database on server1 if it does not exist.

    .EXAMPLE
        PS C:\> New-DbaDbMasterKey -SqlInstance Server1 -Database db1 -Confirm:$false

        Suppresses all prompts to install but prompts in th console to securely enter your password and creates a master key in the 'db1' database

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "High")]
    param (
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [PSCredential]$Credential,
        [string[]]$Database = "master",
        [Alias("Password")]
        [Security.SecureString]$SecurePassword,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Database[]]$InputObject,
        [switch]$EnableException
    )
    begin {
        if ($Credential) {
            $SecurePassword = $Credential.Password
        } else {
            if (-not $SecurePassword) {
                $SecurePassword = Read-Host "Password" -AsSecureString
            }
        }
    }
    process {
        if ($SqlInstance) {
            $InputObject += Get-DbaDatabase -SqlInstance $SqlInstance -Database $Database -ExcludeDatabase $ExcludeDatabase
        }

        foreach ($db in $InputObject) {
            if ($null -ne $db.MasterKey) {
                Stop-Function -Message "Master key already exists in the $db database on $($db.Parent.Name)" -Target $db -Continue
            }

            if ($Pscmdlet.ShouldProcess($db.Parent.Name, "Creating master key for database '$($db.Name)'")) {
                try {
                    $masterkey = New-Object Microsoft.SqlServer.Management.Smo.MasterKey $db
                    $masterkey.Create(([System.Runtime.InteropServices.marshal]::PtrToStringAuto([System.Runtime.InteropServices.marshal]::SecureStringToBSTR($SecurePassword))))

                    Add-Member -Force -InputObject $masterkey -MemberType NoteProperty -Name ComputerName -value $db.Parent.ComputerName
                    Add-Member -Force -InputObject $masterkey -MemberType NoteProperty -Name InstanceName -value $db.Parent.ServiceName
                    Add-Member -Force -InputObject $masterkey -MemberType NoteProperty -Name SqlInstance -value $db.Parent.DomainInstanceName
                    Add-Member -Force -InputObject $masterkey -MemberType NoteProperty -Name Database -value $db.Name

                    Select-DefaultView -InputObject $masterkey -Property ComputerName, InstanceName, SqlInstance, Database, CreateDate, DateLastModified, IsEncryptedByServer
                } catch {
                    Stop-Function -Message "Failed to create master key in $db on $instance. Exception: $($_.Exception.InnerException)" -Target $masterkey -ErrorRecord $_ -Continue
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias New-DbaDatabaseMasterKey
    }
}

tools\dbatools\functions\New-DbaDbSnapshot.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function New-DbaDbSnapshot {
    <#
    .SYNOPSIS
        Creates database snapshots

    .DESCRIPTION
        Creates database snapshots without hassles

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Credential object used to connect to the SQL Server as a different user

    .PARAMETER AllDatabases
        Creates snapshot for all eligible databases

    .PARAMETER Database
        The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto-populated from the server

    .PARAMETER WhatIf
        Shows what would happen if the command were to run

    .PARAMETER Confirm
        Prompts for confirmation of every step.

    .PARAMETER Name
        The specific snapshot name you want to create. Works only if you target a single database. If you need to create multiple snapshot,
        you must use the NameSuffix parameter

    .PARAMETER NameSuffix
        When you pass a simple string, it'll be appended to use it to build the name of the snapshot. By default snapshots are created with yyyyMMdd_HHmmss suffix
        You can also pass a standard placeholder, in which case it'll be interpolated (e.g. '{0}' gets replaced with the database name)

    .PARAMETER Path
        Snapshot files will be created here (by default the filestructure will be created in the same folder as the base db)

    .PARAMETER InputObject
        Allows Piping from Get-DbaDatabase

    .PARAMETER Force
        Databases with Filestream FG can be snapshotted, but the Filestream FG is marked offline
        in the snapshot. To create a "partial" snapshot, you need to pass -Force explicitely

        NB: You can't then restore the Database from the newly-created snapshot.
        For details, check https://msdn.microsoft.com/en-us/library/bb895334.aspx

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Snapshot, Restore, Database
        Author: Simone Bizzotto (@niphold)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/New-DbaDbSnapshot

    .EXAMPLE
        PS C:\> New-DbaDbSnapshot -SqlInstance sqlserver2014a -Database HR, Accounting

        Creates snapshot for HR and Accounting, returning a custom object displaying Server, Database, DatabaseCreated, SnapshotOf, SizeMB, DatabaseCreated, PrimaryFilePath, Status, Notes

    .EXAMPLE
        PS C:\> New-DbaDbSnapshot -SqlInstance sqlserver2014a -Database HR -Name HR_snap

        Creates snapshot named "HR_snap" for HR

    .EXAMPLE
        PS C:\> New-DbaDbSnapshot -SqlInstance sqlserver2014a -Database HR -NameSuffix 'fool_{0}_snap'

        Creates snapshot named "fool_HR_snap" for HR

    .EXAMPLE
        PS C:\> New-DbaDbSnapshot -SqlInstance sqlserver2014a -Database HR, Accounting -Path F:\snapshotpath

        Creates snapshots for HR and Accounting databases, storing files under the F:\snapshotpath\ dir

    .EXAMPLE
        PS C:\> Get-DbaDatabase -SqlInstance sql2016 -Database df | New-DbaDbSnapshot

        Creates a snapshot for the database df on sql2016

    #>

    [CmdletBinding(SupportsShouldProcess)]
    param (
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [switch]$AllDatabases,
        [string]$Name,
        [string]$NameSuffix,
        [string]$Path,
        [switch]$Force,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Database[]]$InputObject,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {

        $NoSupportForSnap = @('model', 'master', 'tempdb')
        # Evaluate the default suffix here for naming consistency
        $DefaultSuffix = (Get-Date -Format "yyyyMMdd_HHmmss")
        if ($NameSuffix.Length -gt 0) {
            #Validate if Name can be interpolated
            try {
                $null = $NameSuffix -f 'some_string'
            } catch {
                Stop-Function -Message "NameSuffix parameter must be a template only containing one parameter {0}" -ErrorRecord $_
            }
        }

        function Resolve-SnapshotError($server) {
            $errhelp = ''
            $CurrentEdition = $server.Edition.toLower()
            $CurrentVersion = $server.Version.Major * 1000000 + $server.Version.Minor * 10000 + $server.Version.Build
            if ($server.Version.Major -lt 9) {
                $errhelp = 'Not supported before 2005'
            }
            if ($CurrentVersion -lt 12002000 -and $errhelp.Length -eq 0) {
                if ($CurrentEdition -notmatch '.*enterprise.*|.*developer.*|.*datacenter.*') {
                    $errhelp = 'Supported only for Enterprise, Developer or Datacenter editions'
                }
            }
            $message = ""
            if ($errhelp.Length -gt 0) {
                $message += "Please make sure your version supports snapshots : ($errhelp)"
            } else {
                $message += "This module can't tell you why the snapshot creation failed. Feel free to report back to dbatools what happened"
            }
            Write-Message -Level Warning -Message $message
        }
    }
    process {
        if (-not $InputObject -and -not $Database -and $AllDatabases -eq $false) {
            Stop-Function -Message "You must specify a -AllDatabases or -Database to continue" -EnableException $EnableException
            return
        }

        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }
            #Checks for path existence, left the length test because test-bound wasn't working for some reason
            if ($Path.Length -gt 0) {
                if (!(Test-DbaPath -SqlInstance $instance -Path $Path)) {
                    Stop-Function -Message "$instance cannot access the directory $Path" -ErrorRecord $_ -Target $instance -Continue -EnableException $EnableException
                }
            }

            if ($AllDatabases) {
                $dbs = $server.Databases
            }

            if ($Database) {
                $dbs = $server.Databases | Where-Object { $Database -contains $_.Name }
            }

            if ($ExcludeDatabase) {
                $dbs = $server.Databases | Where-Object { $ExcludeDatabase -notcontains $_.Name }
            }

            ## double check for gotchas
            foreach ($db in $dbs) {
                if ($db.IsDatabaseSnapshot) {
                    Write-Message -Level Warning -Message "$($db.name) is a snapshot, skipping"
                } elseif ($db.name -in $NoSupportForSnap) {
                    Write-Message -Level Warning -Message "$($db.name) snapshots are prohibited"
                } elseif ($db.IsAccessible -ne $true) {
                    Write-Message -Level Verbose -Message "$($db.name) is not accessible, skipping"
                } else {
                    $InputObject += $db
                }
            }

            if ($InputObject.Length -gt 1 -and $Name) {
                Stop-Function -Message "You passed the Name parameter that is fixed but selected multiple databases to snapshot: use the NameSuffix parameter" -Continue -EnableException $EnableException
            }
        }

        foreach ($db in $InputObject) {
            $server = $db.Parent

            # In case stuff is piped in
            if ($server.VersionMajor -lt 9) {
                Stop-Function -Message "SQL Server version 9 required - $server not supported" -Continue
            }

            if ($NameSuffix.Length -gt 0) {
                $SnapName = $NameSuffix -f $db.Name
                if ($SnapName -eq $NameSuffix) {
                    #no interpolation, just append
                    $SnapName = '{0}{1}' -f $db.Name, $NameSuffix
                }
            } elseif ($Name.Length -gt 0) {
                $SnapName = $Name
            } else {
                $SnapName = "{0}_{1}" -f $db.Name, $DefaultSuffix
            }
            if ($SnapName -in $server.Databases.Name) {
                Write-Message -Level Warning -Message "A database named $Snapname already exists, skipping"
                continue
            }
            $all_FSD = $db.FileGroups | Where-Object FileGroupType -eq 'FileStreamDataFileGroup'
            $all_MMO = $db.FileGroups | Where-Object FileGroupType -eq 'MemoryOptimizedDataFileGroup'
            $has_FSD = $all_FSD.Count -gt 0
            $has_MMO = $all_MMO.Count -gt 0
            if ($has_MMO) {
                Write-Message -Level Warning -Message "MEMORY_OPTIMIZED_DATA detected, snapshots are not possible"
                continue
            }
            if ($has_FSD -and $Force -eq $false) {
                Write-Message -Level Warning -Message "Filestream detected, skipping. You need to specify -Force. See Get-Help for details"
                continue
            }
            $snaptype = "db snapshot"
            if ($has_FSD) {
                $snaptype = "partial db snapshot"
            }
            If ($Pscmdlet.ShouldProcess($server, "Create $snaptype $SnapName of $($db.Name)")) {
                $CustomFileStructure = @{ }
                $counter = 0
                foreach ($fg in $db.FileGroups) {
                    $CustomFileStructure[$fg.Name] = @()
                    if ($fg.FileGroupType -eq 'FileStreamDataFileGroup') {
                        Continue
                    }
                    foreach ($file in $fg.Files) {
                        $counter += 1
                        $basename = [IO.Path]::GetFileNameWithoutExtension($file.FileName)
                        $basepath = Split-Path $file.FileName -Parent
                        # change path if specified
                        if ($Path.Length -gt 0) {
                            $basepath = $Path
                        }
                        # we need to avoid cases where basename is the same for multiple FG
                        $fname = [IO.Path]::Combine($basepath, ("{0}_{1}_{2:0000}_{3:000}" -f $basename, $DefaultSuffix, (Get-Date).MilliSecond, $counter))
                        # fixed extension is hardcoded as "ss", which seems a "de-facto" standard
                        $fname = [IO.Path]::ChangeExtension($fname, "ss")
                        $CustomFileStructure[$fg.Name] += @{ 'name' = $file.name; 'filename' = $fname }
                    }
                }

                $SnapDB = New-Object -TypeName Microsoft.SqlServer.Management.Smo.Database -ArgumentList $server, $Snapname
                $SnapDB.DatabaseSnapshotBaseName = $db.Name

                foreach ($fg in $CustomFileStructure.Keys) {
                    $SnapFG = New-Object -TypeName Microsoft.SqlServer.Management.Smo.FileGroup $SnapDB, $fg
                    $SnapDB.FileGroups.Add($SnapFG)
                    foreach ($file in $CustomFileStructure[$fg]) {
                        $SnapFile = New-Object -TypeName Microsoft.SqlServer.Management.Smo.DataFile $SnapFG, $file['name'], $file['filename']
                        $SnapDB.FileGroups[$fg].Files.Add($SnapFile)
                    }
                }

                # we're ready to issue a Create, but SMO is a little uncooperative here
                # there are cases we can manage and others we can't, and we need all the
                # info we can get both from testers and from users

                $sql = $SnapDB.Script()

                try {
                    $SnapDB.Create()
                    $server.Databases.Refresh()
                    Get-DbaDbSnapshot -SqlInstance $server -Snapshot $Snapname
                } catch {
                    try {
                        $server.Databases.Refresh()
                        if ($SnapName -notin $server.Databases.Name) {
                            # previous creation failed completely, snapshot is not there already
                            $null = $server.Query($sql[0])
                            $server.Databases.Refresh()
                            $SnapDB = Get-DbaDbSnapshot -SqlInstance $server -Snapshot $Snapname
                        } else {
                            $SnapDB = Get-DbaDbSnapshot -SqlInstance $server -Snapshot $Snapname
                        }

                        $Notes = @()
                        if ($db.ReadOnly -eq $true) {
                            $Notes += 'SMO is probably trying to set a property on a read-only snapshot, run with -Debug to find out and report back'
                        }
                        if ($has_FSD) {
                            #Variable marked as unused by PSScriptAnalyzer
                            #$Status = 'Partial'
                            $Notes += 'Filestream groups are not viable for snapshot'
                        }
                        $Notes = $Notes -Join ';'

                        $hints = @("Executing these commands led to a partial failure")
                        foreach ($stmt in $sql) {
                            $hints += $stmt
                        }

                        Write-Message -Level Debug -Message ($hints -Join "`n")

                        $SnapDB
                    } catch {
                        # Resolve-SnapshotError $server
                        $hints = @("Executing these commands led to a failure")
                        foreach ($stmt in $sql) {
                            $hints += $stmt
                        }
                        Write-Message -Level Debug -Message ($hints -Join "`n")

                        Stop-Function -Message "Failure" -ErrorRecord $_ -Target $SnapDB -Continue
                    }
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias New-DbaDatabaseSnapshot
    }
}

tools\dbatools\functions\New-DbaDbUser.ps1

function New-DbaDbUser {
    <#
    .SYNOPSIS
        Creates a new user for the specified database.

    .DESCRIPTION
        Creates a new user for a specified database with provided specifications.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. Defaults to the default instance on localhost.

    .PARAMETER SqlCredential
        Allows you to login to servers using SQL Logins instead of Windows Authentication (AKA Integrated or Trusted). To use:

        $scred = Get-Credential, then pass $scred object to the -SqlCredential parameter.

        Windows Authentication will be used if SqlCredential is not specified. SQL Server does not accept Windows credentials being passed as credentials.

        To connect to SQL Server as a different Windows user, run PowerShell as that user.

    .PARAMETER Database
        Specifies the database(s) to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        Specifies the database(s) to exclude from processing. Options for this list are auto-populated from the server. By default, system databases are excluded.

    .PARAMETER IncludeSystem
        If this switch is enabled, the user will be added to system databases.

    .PARAMETER Login
        When specified, the user will be associated to this SQL login and have the same name as the Login.

    .PARAMETER Username
        When specified, the user will have this name.

    .PARAMETER Force
        If user exists, drop and recreate.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Database, User
        Author: Frank Henninger (@osiris687)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/New-DbaDbUser

    .EXAMPLE
        PS C:\> New-DbaDbUser -SqlInstance sqlserver2014 -Database DB1 -Login user1

        Creates a new sql user with login named user1 in the specified database.

    .EXAMPLE
        PS C:\> New-DbaDbUser -SqlInstance sqlserver2014 -Database DB1 -Username user1

        Creates a new sql user without login named user1 in the specified database.

    .EXAMPLE
        PS C:\> New-DbaDbUser -SqlInstance sqlserver2014 -Database DB1 -Login Login1 -Username user1

        Creates a new sql user named user1 mapped to Login1 in the specified database.

    .EXAMPLE
        PS C:\> Get-DbaDbUser -SqlInstance sqlserver1 -Database DB1 | New-DbaDbUser -SqlInstance sqlserver2 -Database DB1

        Copies users from sqlserver1.DB1 to sqlserver2.DB1. Does not copy permissions!

    #>
    [CmdletBinding(SupportsShouldProcess, DefaultParameterSetName = "NoLogin")]
    param(
        [parameter(Mandatory, Position = 1)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [switch]$IncludeSystem,
        [parameter(ParameterSetName = "Login")]
        [string[]]$Login,
        [parameter(ParameterSetName = "NoLogin")]
        [parameter(ParameterSetName = "Login")]
        [string[]]$Username,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        function Test-SqlLoginInDatabase {
            param(
                [Microsoft.SqlServer.Management.Smo.Login]$Login,
                [Microsoft.SqlServer.Management.Smo.Database]$Database
            )

            # Does user exist with same login?
            if ( $existingUser = ( $Database.Users | Where-Object Login -eq $smoLogin ) ) {
                if (Test-Bound 'Force') {
                    if ($Pscmdlet.ShouldProcess($existingUser, "Dropping existing user $($existingUser.Name) because -Force was used")) {
                        try {
                            $existingUser.Drop()
                        } catch {
                            Stop-Function -Message "Could not remove existing user $($existingUser.Name), skipping." -Target $existingUser -ErrorRecord $_ -Exception $_.Exception.InnerException.InnerException.InnerException -Continue
                        }
                    }
                } else {
                    Stop-Function -Message "User $($existingUser.Name) already exists and -Force was not specified" -Target $existingUser -Continue
                }
            }
        }

        function Test-SqlUserInDatabase {
            param(
                [string[]]$Username,
                [Microsoft.SqlServer.Management.Smo.Database]$Database
            )

            # Does user exist with same login?
            if ( $existingUser = ( $Database.Users | Where-Object Name -eq $Username ) ) {
                if (Test-Bound 'Force') {
                    if ($Pscmdlet.ShouldProcess($existingUser, "Dropping existing user $($existingUser.Name) because -Force was used")) {
                        try {
                            $existingUser.Drop()
                        } catch {
                            Stop-Function -Message "Could not remove existing user $($existingUser.Name), skipping." -Target $existingUser -ErrorRecord $_ -Exception $_.Exception.InnerException.InnerException.InnerException -Continue
                        }
                    }
                } else {
                    Stop-Function -Message "User $($existingUser.Name) already exists and -Force was not specified" -Target $existingUser -Continue
                }
            }
        }
    }

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $databases = $server.Databases | Where-Object IsAccessible -eq $true

            if ($Database) {
                $databases = $databases | Where-Object Name -In $Database
            }
            if ($ExcludeDatabase) {
                $databases = $databases | Where-Object Name -NotIn $ExcludeDatabase
            }
            if (Test-Bound 'IncludeSystem' -Not) {
                $databases = $databases | Where-Object IsSystemObject -NE $true
            }

            foreach ($db in $databases) {
                Write-Message -Level Verbose -Message "Add users to Database $db on target $server"

                switch -Wildcard ($PSCmdlet.ParameterSetName) {
                    "Login*" {
                        # Creates a user with Login
                        Write-Message -Level VeryVerbose -Message "Using UserType: SqlLogin"

                        if ($PSBoundParameters.Keys -notcontains 'Login') {
                            Stop-Function -Message "Parameter -Login is required " -Target $instance
                        }
                        if ($Login.GetType().Name -eq 'Login') {
                            $smoLogin = $Login
                        } else {
                            #get the login associated with the given name.
                            $smoLogin = $server.Logins | Where-Object Name -eq $Login
                            if ($null -eq $smoLogin) {
                                Stop-Function -Message "Invalid Login: $Login is not found on $Server" -Target $instance;
                                return
                            }
                        }

                        Test-SqlLoginInDatabase -Database $db -Login $smoLogin

                        if ( $PSCmdlet.ParameterSetName -eq "LoginWithNewUsername" ) {
                            $Name = $Username
                            Write-Message -Level Verbose -Message "Using UserName: $Username"
                        } else {
                            $Name = $smoLogin.Name
                            Write-Message -Level Verbose -Message "Using LoginName: $Name"
                        }

                        $Login = $smoLogin
                        $UserType = [Microsoft.SqlServer.Management.Smo.UserType]::SqlLogin
                    }

                    "NoLogin" {
                        # Creates a user without login
                        Write-Message -Level Verbose -Message "Using UserType: NoLogin"
                        $UserType = [Microsoft.SqlServer.Management.Smo.UserType]::NoLogin
                        $Name = $Username
                    }
                } #switch

                # Does user exist with same name?
                Test-SqlUserInDatabase -Database $db -Username $Name

                if ($Pscmdlet.ShouldProcess($db, "Creating user $Name")) {
                    try {
                        $smoUser = New-Object Microsoft.SqlServer.Management.Smo.User
                        $smoUser.Parent = $db
                        $smoUser.Name = $Name

                        if ( $PSBoundParameters.Keys -contains 'Login' -and $Login.GetType().Name -eq 'Login' ) {
                            $smoUser.Login = Login
                        }
                        $smoUser.UserType = $UserType

                        $smoUser.Create()
                    } catch {
                        Stop-Function -Message "Failed to add user $Name in $db to $instance"  -Category InvalidOperation -ErrorRecord $_ -Target $instance -Continue
                    }
                    $smoUser.Refresh()

                    if ( $PSBoundParameters.Keys -contains 'Username' -and $smoUser.Name -ne $Username ) {
                        $smoUser.Rename($Username)
                    }

                    Write-Message -Level Verbose -Message "Successfully added $smoUser in $db to $instance."
                }

                #Display Results
                Get-DbaDbUser -SqlInstance $instance -SqlCredential $sqlcredential -Database $db.Name | Where-Object name -eq $smoUser.Name
            }
        }
    }
}

tools\dbatools\functions\New-DbaDirectory.ps1

function New-DbaDirectory {
    <#
    .SYNOPSIS
        Creates new path as specified by the path variable

    .DESCRIPTION
        Uses master.dbo.xp_create_subdir to create the path
        Returns $true if the path can be created, $false otherwise

    .PARAMETER SqlInstance
        The SQL Server you want to run the test on.

    .PARAMETER Path
        The Path to tests. Can be a file or directory.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Path, Directory, Folder
        Author: Stuart Moore

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        Requires: Admin access to server (not SQL Services),
        Remoting must be enabled and accessible if $SqlInstance is not local

    .LINK
        https://dbatools.io/New-DbaDirectory

    .EXAMPLE
        PS C:\> New-DbaDirectory -SqlInstance sqlcluster -Path L:\MSAS12.MSSQLSERVER\OLAP

        If the SQL Server instance sqlcluster can create the path L:\MSAS12.MSSQLSERVER\OLAP it will do and return $true, if not it will return $false.

    .EXAMPLE
        PS C:\> $credential = Get-Credential
        PS C:\> New-DbaDirectory -SqlInstance sqlcluster -SqlCredential $credential -Path L:\MSAS12.MSSQLSERVER\OLAP

        If the SQL Server instance sqlcluster can create the path L:\MSAS12.MSSQLSERVER\OLAP it will do and return $true, if not it will return $false. Uses a SqlCredential to connect

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [Parameter(Mandatory)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Parameter(Mandatory)]
        [string]$Path,
        [PSCredential]$SqlCredential,
        [switch]$EnableException
    )

    Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias New-DbaSqlDirectory

    foreach ($instance in $SqlInstance) {
        try {
            $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
        } catch {
            Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
        }

        $Path = $Path.Replace("'", "''")

        $exists = Test-DbaPath -SqlInstance $sqlinstance -SqlCredential $SqlCredential -Path $Path

        if ($exists) {
            Stop-Function -Message "$Path already exists" -Target $server -Continue
        }

        $sql = "EXEC master.dbo.xp_create_subdir'$path'"
        Write-Message -Level Debug -Message $sql
        if ($Pscmdlet.ShouldProcess($path, "Creating a new path on $($server.name)")) {
            try {
                $null = $server.Query($sql)
                $Created = $true
            } catch {
                $Created = $false
                Stop-Function -Message "Failure" -ErrorRecord $_
            }

            [pscustomobject]@{
                Server  = $SqlInstance
                Path    = $Path
                Created = $Created
            }
        }
    }
}

tools\dbatools\functions\Get-DbaService.ps1

function Get-DbaService {
    <#
    .SYNOPSIS
        Gets the SQL Server related services on a computer.

    .DESCRIPTION
        Gets the SQL Server related services on one or more computers.

        Requires Local Admin rights on destination computer(s).

    .PARAMETER ComputerName
        The target SQL Server instance or instances.

    .PARAMETER InstanceName
        Only returns services that belong to the specific instances.

    .PARAMETER Credential
        Credential object used to connect to the computer as a different user.

    .PARAMETER Type
        Use -Type to collect only services of the desired SqlServiceType.
        Can be one of the following: "Agent","Browser","Engine","FullText","SSAS","SSIS","SSRS", "PolyBase"

    .PARAMETER ServiceName
        Can be used to specify service names explicitly, without looking for service types/instances.

    .PARAMETER AdvancedProperties
        Collect additional properties from the SqlServiceAdvancedProperty Namespace
        This collects information about Version, Service Pack Level", SkuName, Clustered status and the Cluster Service Name
        This adds additional overhead to the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Service, SqlServer, Instance, Connect
        Author: Klaas Vandenberghe ( @PowerDBAKlaas )

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaService

    .EXAMPLE
        PS C:\> Get-DbaService -ComputerName sqlserver2014a

        Gets the SQL Server related services on computer sqlserver2014a.

    .EXAMPLE
        PS C:\> 'sql1','sql2','sql3' | Get-DbaService -AdvancedProperties

        Gets the SQL Server related services on computers sql1, sql2 and sql3. Includes Advanced Properties from the SqlServiceAdvancedProperty Namespace

    .EXAMPLE
        PS C:\> $cred = Get-Credential WindowsUser
        PS C:\> Get-DbaService -ComputerName sql1,sql2 -Credential $cred  | Out-GridView

        Gets the SQL Server related services on computers sql1 and sql2 via the user WindowsUser, and shows them in a grid view.

    .EXAMPLE
        PS C:\> Get-DbaService -ComputerName sql1,sql2 -InstanceName MSSQLSERVER

        Gets the SQL Server related services related to the default instance MSSQLSERVER on computers sql1 and sql2.

    .EXAMPLE
        PS C:\> Get-DbaService -ComputerName $MyServers -Type SSRS

        Gets the SQL Server related services of type "SSRS" (Reporting Services) on computers in the variable MyServers.

    .EXAMPLE
        PS C:\> $MyServers =  Get-Content .\servers.txt
        PS C:\> Get-DbaService -ComputerName $MyServers -ServiceName MSSQLSERVER,SQLSERVERAGENT

        Gets the SQL Server related services with ServiceName MSSQLSERVER or SQLSERVERAGENT  for all the servers that are stored in the file. Every line in the file can only contain one hostname for a server.

    .EXAMPLE
        PS C:\> $services = Get-DbaService -ComputerName sql1 -Type Agent,Engine
        PS C:\> $services.ChangeStartMode('Manual')

        Gets the SQL Server related services of types Sql Agent and DB Engine on computer sql1 and changes their startup mode to 'Manual'.

    .EXAMPLE
        PS C:\> (Get-DbaService -ComputerName sql1 -Type Engine).Restart($true)

        Calls a Restart method for each Engine service on computer sql1.

    #>
    [CmdletBinding(DefaultParameterSetName = "Search")]
    param (
        [parameter(ValueFromPipeline, Position = 1)]
        [Alias("cn", "host", "Server")]
        [DbaInstanceParameter[]]$ComputerName = $env:COMPUTERNAME,
        [Parameter(ParameterSetName = "Search")]
        [Alias("Instance")]
        [string[]]$InstanceName,
        [PSCredential]$Credential,
        [Parameter(ParameterSetName = "Search")]
        [ValidateSet("Agent", "Browser", "Engine", "FullText", "SSAS", "SSIS", "SSRS", "PolyBase")]
        [string[]]$Type,
        [Parameter(ParameterSetName = "ServiceName")]
        [string[]]$ServiceName,
        [switch]$AdvancedProperties,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        #Dictionary to transform service type IDs into the names from Microsoft.SqlServer.Management.Smo.Wmi.ManagedComputer.Services.Type
        $ServiceIdMap = @(
            @{ Name = "Engine"; Id = 1 },
            @{ Name = "Agent"; Id = 2 },
            @{ Name = "FullText"; Id = 3, 9 },
            @{ Name = "SSIS"; Id = 4 },
            @{ Name = "SSAS"; Id = 5 },
            @{ Name = "SSRS"; Id = 6 },
            @{ Name = "Browser"; Id = 7 },
            @{ Name = "PolyBase"; Id = 10, 11 },
            @{ Name = "Unknown"; Id = 8 }
        )
        if ($PsCmdlet.ParameterSetName -match 'Search') {
            if ($Type) {
                $searchClause = ""
                foreach ($itemType in $Type) {
                    foreach ($id in ($ServiceIdMap | Where-Object { $_.Name -eq $itemType }).Id) {
                        if ($searchClause) { $searchClause += ' OR ' }
                        $searchClause += "SQLServiceType = $id"
                    }
                }
            } else {
                $searchClause = "SQLServiceType > 0"
            }
        } elseif ($PsCmdlet.ParameterSetName -match 'ServiceName') {
            if ($ServiceName) {
                $searchClause = ""
                foreach ($sn in $ServiceName) {
                    if ($searchClause) { $searchClause += ' OR ' }
                    $searchClause += "ServiceName = '$sn'"
                }
            } else {
                $searchClause = "SQLServiceType > 0"
            }
        }
    }
    process {
        foreach ($Computer in $ComputerName.ComputerName) {
            $Server = Resolve-DbaNetworkName -ComputerName $Computer -Credential $credential
            if ($Server.FullComputerName) {
                $Computer = $server.FullComputerName
                $outputServices = @()
                if (!$Type -or 'SSRS' -in $Type) {
                    Write-Message -Level Verbose -Message "Getting SQL Reporting Server services on $Computer" -Target $Computer
                    $reportingServices = Get-DbaReportingService -ComputerName $Computer -InstanceName $InstanceName -Credential $Credential -ServiceName $ServiceName
                    $outputServices += $reportingServices
                }
                Write-Message -Level Verbose -Message "Getting SQL Server namespace on $Computer" -Target $Computer
                try { $namespaces = Get-DbaCmObject -ComputerName $Computer -NameSpace root\Microsoft\SQLServer -Query "Select Name FROM __NAMESPACE WHERE Name Like 'ComputerManagement%'" -EnableException -Credential $credential | Sort-Object Name -Descending }
                catch {
                    # here to avoid an empty catch
                    $null = 1
                }
                if ($namespaces) {
                    $servicesTemp = @()

                    ForEach ($namespace in $namespaces) {
                        try {
                            Write-Message -Level Verbose -Message "Getting Cim class SqlService in Namespace $($namespace.Name) on $Computer." -Target $Computer
                            foreach ($service in (Get-DbaCmObject -ComputerName $Computer -Namespace "root\Microsoft\SQLServer\$($namespace.Name)" -Query "SELECT * FROM SqlService WHERE $searchClause" -EnableException -Credential $credential)) {
                                $servicesTemp += New-Object PSObject -Property @{
                                    Name      = $service.ServiceName
                                    Namespace = $namespace.Name
                                    Service   = $service
                                }
                            }
                        } catch {
                            Write-Message -Level Verbose -Message "Failed to acquire services from namespace $($namespace.Name)." -Target $Computer -ErrorRecord $_
                        }
                    }
                }
                #use highest namespace available
                $services = ($servicesTemp | Group-Object Name | ForEach-Object { $_.Group | Sort-Object Namespace -Descending | Select-Object -First 1 }).Service
                #remove services returned by the SSRS namespace
                $services = $services | Where-Object ServiceName -notin $reportingServices.ServiceName
                #Add custom properties and methods to the service objects
                ForEach ($service in $services) {
                    Add-Member -Force -InputObject $service -MemberType NoteProperty -Name ComputerName -Value $service.HostName
                    Add-Member -Force -InputObject $service -MemberType NoteProperty -Name ServiceType -Value ($ServiceIdMap | Where-Object { $_.Id -contains $service.SQLServiceType }).Name
                    Add-Member -Force -InputObject $service -MemberType NoteProperty -Name State -Value $(switch ($service.State) { 1 { 'Stopped' } 2 { 'Start Pending' }  3 { 'Stop Pending' } 4 { 'Running' } })
                    Add-Member -Force -InputObject $service -MemberType NoteProperty -Name StartMode -Value $(switch ($service.StartMode) { 1 { 'Unknown' } 2 { 'Automatic' }  3 { 'Manual' } 4 { 'Disabled' } })

                    if ($service.ServiceName -in ("MSSQLSERVER", "SQLSERVERAGENT", "ReportServer", "MSSQLServerOLAPService")) {
                        $instance = "MSSQLSERVER"
                    } else {
                        if ($service.ServiceType -in @("Agent", "Engine", "SSRS", "SSAS")) {
                            if ($service.ServiceName.indexof('$') -ge 0) {
                                $instance = $service.ServiceName.split('$')[1]
                            } else {
                                $instance = "Unknown"
                            }
                        } else {
                            $instance = ""
                        }
                    }
                    $priority = switch ($service.ServiceType) {
                        "Engine" { 200 }
                        default { 100 }
                    }
                    #If only specific instances are selected
                    if (!$InstanceName -or $instance -in $InstanceName) {
                        #Add other properties and methods
                        Add-Member -Force -InputObject $service -NotePropertyName InstanceName -NotePropertyValue $instance
                        Add-Member -Force -InputObject $service -NotePropertyName ServicePriority -NotePropertyValue $priority
                        Add-Member -Force -InputObject $service -MemberType ScriptMethod -Name "Stop" -Value {
                            param ([bool]$Force = $false)
                            Stop-DbaService -InputObject $this -Force:$Force
                        }
                        Add-Member -Force -InputObject $service -MemberType ScriptMethod -Name "Start" -Value { Start-DbaService -InputObject $this }
                        Add-Member -Force -InputObject $service -MemberType ScriptMethod -Name "Restart" -Value {
                            param ([bool]$Force = $false)
                            Restart-DbaService -InputObject $this -Force:$Force
                        }
                        Add-Member -Force -InputObject $service -MemberType ScriptMethod -Name "ChangeStartMode" -Value {
                            param (
                                [parameter(Mandatory)]
                                [string]$Mode
                            )
                            $supportedModes = @("Automatic", "Manual", "Disabled")
                            if ($Mode -notin $supportedModes) {
                                Stop-Function -Message ("Incorrect mode '$Mode'. Use one of the following values: {0}" -f ($supportedModes -join ' | ')) -EnableException $false -FunctionName 'Get-DbaService'
                                Return
                            }
                            Set-ServiceStartMode -InputObject $this -Mode $Mode -ErrorAction Stop
                            $this.StartMode = $Mode
                        }

                        if ($AdvancedProperties) {
                            $namespaceValue = $service.CimClass.ToString().ToUpper().Replace(":SQLSERVICE", "").Replace("ROOT/MICROSOFT/SQLSERVER/", "")
                            $serviceAdvancedProperties = Get-DbaCmObject -ComputerName $Computer -Namespace "root\Microsoft\SQLServer\$($namespaceValue)" -Query "SELECT * FROM SqlServiceAdvancedProperty WHERE ServiceName = '$($service.ServiceName)'"

                            Add-Member -Force -InputObject $service -MemberType NoteProperty -Name Version -Value ($serviceAdvancedProperties | Where-Object PropertyName -eq 'VERSION' ).PropertyStrValue
                            Add-Member -Force -InputObject $service -MemberType NoteProperty -Name SPLevel -Value ($serviceAdvancedProperties | Where-Object PropertyName -eq 'SPLEVEL' ).PropertyNumValue
                            Add-Member -Force -InputObject $service -MemberType NoteProperty -Name SkuName -Value ($serviceAdvancedProperties | Where-Object PropertyName -eq 'SKUNAME' ).PropertyStrValue

                            $ClusterServiceTypeList = @(1, 2, 5, 7)
                            if ($ClusterServiceTypeList -contains $service.SQLServiceType) {
                                Add-Member -Force -InputObject $service -MemberType NoteProperty -Name Clustered -Value ($serviceAdvancedProperties | Where-Object PropertyName -eq 'CLUSTERED' ).PropertyNumValue
                                Add-Member -Force -InputObject $service -MemberType NoteProperty -Name VSName -Value ($serviceAdvancedProperties | Where-Object PropertyName -eq 'VSNAME' ).PropertyStrValue
                            } else {
                                Add-Member -Force -InputObject $service -MemberType NoteProperty -Name Clustered -Value ''
                                Add-Member -Force -InputObject $service -MemberType NoteProperty -Name VSName -Value ''
                            }
                        }
                        $outputServices += $service
                    }
                }
                if ($AdvancedProperties) {
                    $defaults = "ComputerName", "ServiceName", "ServiceType", "InstanceName", "DisplayName", "StartName", "State", "StartMode", "Version", "SPLevel", "SkuName", "Clustered", "VSName"
                } else {
                    $defaults = "ComputerName", "ServiceName", "ServiceType", "InstanceName", "DisplayName", "StartName", "State", "StartMode"
                }
                if ($outputServices) {
                    $outputServices | Select-DefaultView -Property $defaults -TypeName DbaSqlService
                } else {
                    Stop-Function -Message "No services found in relevant namespaces on $Computer. Please note that this function is available from SQL 2005 up."
                }
            } else {
                Stop-Function -EnableException $EnableException -Message "Failed to connect to $Computer" -Continue
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Get-DbaSqlService
    }
}

tools\dbatools\functions\Get-DbaSpConfigure.ps1

function Get-DbaSpConfigure {
    <#
    .SYNOPSIS
        Returns all server level system configuration (sys.configuration/sp_configure) information

    .DESCRIPTION
        This function returns server level system configuration (sys.configuration/sp_configure) information. The information is gathered through SMO Configuration.Properties.
        The data includes the default value for each configuration, for quick identification of values that may have been changed.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Name
        Return only specific configurations. Name can be either values from (sys.configuration/sp_configure) or from SMO object

    .PARAMETER ExcludeName
        Exclude specific configurations. Name can be either values from (sys.configuration/sp_configure) or from SMO object

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: SpConfig, Configure, Configuration
        Author: Nic Cain, https://sirsql.net/

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaSpConfigure

    .INPUTS
        A DbaInstanceParameter representing an array of SQL Server instances.

    .OUTPUTS
        Returns PSCustomObject with properties ServerName, ComputerName, InstanceName, SqlInstance, Name, DisplayName, Description, IsAdvanced, IsDynamic, MinValue, MaxValue, ConfiguredValue, RunningValue, DefaultValue, IsRunningDefaultValue

    .EXAMPLE
        PS C:\> Get-DbaSpConfigure -SqlInstance localhost

        Returns all system configuration information on the localhost.

    .EXAMPLE
        PS C:\> 'localhost','localhost\namedinstance' | Get-DbaSpConfigure

        Returns system configuration information on multiple instances piped into the function

    .EXAMPLE
        PS C:\> Get-DbaSpConfigure -SqlInstance sql2012 -Name 'max server memory (MB)'

        Returns only the system configuration for MaxServerMemory on sql2012.

    .EXAMPLE
        PS C:\> Get-DbaSpConfigure -SqlInstance sql2012 -ExcludeName 'max server memory (MB)', RemoteAccess | Out-GridView

        Returns system configuration information on sql2012 but excludes for max server memory (MB) and remote access. Values returned in grid view

    .EXAMPLE
        PS C:\> $cred = Get-Credential SqlCredential
        PS C:\> 'sql2012' | Get-DbaSpConfigure -SqlCredential $cred -Name RemoteAccess, 'max server memory (MB)' -ExcludeName 'remote access' | Out-GridView

        Returns system configuration information on sql2012 using SQL Server Authentication. Only MaxServerMemory is returned as RemoteAccess was also excluded.

    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "SqlServers")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias("Config", "ConfigName")]
        [string[]]$Name,
        [string[]]$ExcludeName,
        [switch]$EnableException
    )
    begin {
        $smoName = [pscustomobject]@{
            "Ad Hoc Distributed Queries"         = "AdHocDistributedQueriesEnabled"
            "affinity I/O mask"                  = "AffinityIOMask"
            "affinity mask"                      = "AffinityMask"
            "affinity64 I/O mask"                = "Affinity64IOMask"
            "affinity64 mask"                    = "Affinity64Mask"
            "Agent XPs"                          = "AgentXPsEnabled"
            "allow updates"                      = "AllowUpdates"
            "awe enabled"                        = "AweEnabled"
            "backup compression default"         = "DefaultBackupCompression"
            "blocked process threshold"          = "BlockedProcessThreshold"
            "blocked process threshold (s)"      = "BlockedProcessThreshold"
            "c2 audit mode"                      = "C2AuditMode"
            "clr enabled"                        = "IsSqlClrEnabled"
            "common criteria compliance enabled" = "CommonCriteriaComplianceEnabled"
            "contained database authentication"  = "ContainmentEnabled"
            "cost threshold for parallelism"     = "CostThresholdForParallelism"
            "cross db ownership chaining"        = "CrossDBOwnershipChaining"
            "cursor threshold"                   = "CursorThreshold"
            "Database Mail XPs"                  = "DatabaseMailEnabled"
            "default full-text language"         = "DefaultFullTextLanguage"
            "default language"                   = "DefaultLanguage"
            "default trace enabled"              = "DefaultTraceEnabled"
            "disallow results from triggers"     = "DisallowResultsFromTriggers"
            "EKM provider enabled"               = "ExtensibleKeyManagementEnabled"
            "filestream access level"            = "FilestreamAccessLevel"
            "fill factor (%)"                    = "FillFactor"
            "ft crawl bandwidth (max)"           = "FullTextCrawlBandwidthMax"
            "ft crawl bandwidth (min)"           = "FullTextCrawlBandwidthMin"
            "ft notify bandwidth (max)"          = "FullTextNotifyBandwidthMax"
            "ft notify bandwidth (min)"          = "FullTextNotifyBandwidthMin"
            "index create memory (KB)"           = "IndexCreateMemory"
            "in-doubt xact resolution"           = "InDoubtTransactionResolution"
            "lightweight pooling"                = "LightweightPooling"
            "locks"                              = "Locks"
            "max degree of parallelism"          = "MaxDegreeOfParallelism"
            "max full-text crawl range"          = "FullTextCrawlRangeMax"
            "max server memory (MB)"             = "MaxServerMemory"
            "max text repl size (B)"             = "ReplicationMaxTextSize"
            "max worker threads"                 = "MaxWorkerThreads"
            "media retention"                    = "MediaRetention"
            "min memory per query (KB)"          = "MinMemoryPerQuery"
            "min server memory (MB)"             = "MinServerMemory"
            "nested triggers"                    = "NestedTriggers"
            "network packet size (B)"            = "NetworkPacketSize"
            "Ole Automation Procedures"          = "OleAutomationProceduresEnabled"
            "open objects"                       = "OpenObjects"
            "optimize for ad hoc workloads"      = "OptimizeAdhocWorkloads"
            "PH timeout (s)"                     = "ProtocolHandlerTimeout"
            "precompute rank"                    = "PrecomputeRank"
            "priority boost"                     = "PriorityBoost"
            "query governor cost limit"          = "QueryGovernorCostLimit"
            "query wait (s)"                     = "QueryWait"
            "recovery interval (min)"            = "RecoveryInterval"
            "remote access"                      = "RemoteAccess"
            "remote admin connections"           = "RemoteDacConnectionsEnabled"
            "remote data archive"                = "RemoteDataArchiveEnabled"
            "remote login timeout (s)"           = "RemoteLoginTimeout"
            "remote proc trans"                  = "RemoteProcTrans"
            "remote query timeout (s)"           = "RemoteQueryTimeout"
            "Replication XPs"                    = "ReplicationXPsEnabled"
            "scan for startup procs"             = "ScanForStartupProcedures"
            "server trigger recursion"           = "ServerTriggerRecursionEnabled"
            "set working set size"               = "SetWorkingSetSize"
            "show advanced options"              = "ShowAdvancedOptions"
            "SMO and DMO XPs"                    = "SmoAndDmoXPsEnabled"
            "SQL Mail XPs"                       = "SqlMailXPsEnabled"
            "transform noise words"              = "TransformNoiseWords"
            "two digit year cutoff"              = "TwoDigitYearCutoff"
            "user connections"                   = "UserConnections"
            "user options"                       = "UserOptions"
            "Web Assistant Procedures"           = "WebXPsEnabled"
            "xp_cmdshell"                        = "XPCmdShellEnabled"
            # Configurations without defined names - Created dummy entries
            "access check cache bucket count"    = "AccessCheckCacheBucketCount"
            "access check cache quota"           = "AccessCheckCacheQuota"
            "allow polybase export"              = "AllowPolybaseExport"
            "automatic soft-NUMA disabled"       = "AutomaticSoftnumaDisabled"
            "backup checksum default"            = "BackupChecksumDefault"
            "clr strict security"                = "ClrStrictSecurity"
            "external scripts enabled"           = "ExternalScriptsEnabled"
            "hadoop connectivity"                = "HadoopConnectivity"
            "polybase network encryption"        = "PolybaseNetworkEncryption"
            "User Instance Timeout"              = "UserInstanceTimeout"
            "user instances enabled"             = "UserInstancesEnabled"
        }
    }
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failed to process Instance $Instance" -ErrorRecord $_ -Target $instance -Continue
            }

            #Get a list of the configuration Properties. This collection matches entries in sys.configurations
            try {
                $proplist = $server.Configuration.Properties
            } catch {
                Stop-Function -Message "Unable to gather configuration properties $instance" -Target $instance -ErrorRecord $_ -Continue
            }

            if ($Name) {
                $proplist = $proplist | Where-Object { ($_.DisplayName -in $Name -or ($smoName).$($_.DisplayName) -in $Name) }
            }

            if (Test-Bound "ExcludeName") {
                $proplist = $proplist | Where-Object { ($_.DisplayName -NotIn $ExcludeName -and ($smoName).$($_.DisplayName) -NotIn $ExcludeName) }
            }

            #Grab the default sp_configure property values from the external function
            $defaultConfigs = (Get-SqlDefaultSpConfigure -SqlVersion $server.VersionMajor).psobject.properties;

            #Iterate through the properties to get the configuration settings
            foreach ($prop in $proplist) {
                $defaultConfig = $defaultConfigs | Where-Object { $_.Name -eq $prop.DisplayName };

                if ($defaultConfig.Value -eq $prop.RunValue) { $isDefault = $true }
                else { $isDefault = $false }

                #Ignores properties that are not valid on this version of SQL
                if (!([string]::IsNullOrEmpty($prop.RunValue))) {

                    $DisplayName = $prop.DisplayName
                    [pscustomobject]@{
                        ServerName            = $server.Name
                        ComputerName          = $server.ComputerName
                        InstanceName          = $server.ServiceName
                        SqlInstance           = $server.DomainInstanceName
                        Name                  = ($smoName).$DisplayName
                        DisplayName           = $DisplayName
                        Description           = $prop.Description
                        IsAdvanced            = $prop.IsAdvanced
                        IsDynamic             = $prop.IsDynamic
                        MinValue              = $prop.Minimum
                        MaxValue              = $prop.Maximum
                        ConfiguredValue       = $prop.ConfigValue
                        RunningValue          = $prop.RunValue
                        DefaultValue          = $defaultConfig.Value
                        IsRunningDefaultValue = $isDefault
                        Parent                = $server
                        ConfigName            = ($smoName).$DisplayName
                    } | Select-DefaultView -ExcludeProperty ServerName, Parent, ConfigName
                }
            }
        }
    }
}

tools\dbatools\functions\Get-DbaSpinLockStatistic.ps1

function Get-DbaSpinLockStatistic {
    <#
    .SYNOPSIS
        Displays information from sys.dm_os_spinlock_stats.  Works on SQL Server 2008 and above.

    .DESCRIPTION
            This command is based off of Paul Randal's post "Advanced SQL Server performance tuning"

            Returns:
                    SpinLockName
                    Collisions
                    Spins
                    SpinsPerCollision
                    SleepTime
                    Backoffs

            Reference:  https://www.sqlskills.com/blogs/paul/advanced-performance-troubleshooting-waits-latches-spinlocks/

    .PARAMETER SqlInstance
        The SQL Server instance. Server version must be SQL Server version 2008 or higher.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: SpinLockStatistics, Waits
        Author: Patrick Flynn (@sqllensman)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaSpinLockStatistic

    .EXAMPLE
        PS C:\> Get-DbaSpinLockStatistic -SqlInstance sql2008, sqlserver2012

        Get SpinLock Statistics for servers sql2008 and sqlserver2012.

    .EXAMPLE
        PS C:\> $output = Get-DbaSpinLockStatistic -SqlInstance sql2008 | Select * | ConvertTo-DbaDataTable

        Collects all SpinLock Statistics on server sql2008 into a Data Table.

    .EXAMPLE
        PS C:\> 'sql2008','sqlserver2012' | Get-DbaSpinLockStatistic

        Get SpinLock Statistics for servers sql2008 and sqlserver2012 via pipline

    .EXAMPLE
        PS C:\> $cred = Get-Credential sqladmin
        PS C:\> Get-DbaSpinLockStatistic -SqlInstance sql2008 -SqlCredential $cred

        Connects using sqladmin credential and returns SpinLock Statistics from sql2008
    #>
    [CmdletBinding()]
    Param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "SqlServers")]
        [DbaInstance[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias('Silent')]
        [switch]$EnableException
    )

    BEGIN {

        $sql = "SELECT
                	name,
                	collisions,
                	spins,
                	spins_per_collision,
                	sleep_time,
                	backoffs
                FROM sys.dm_os_spinlock_stats;"

        Write-Message -Level Debug -Message $sql
    }

    process {
        if (Test-FunctionInterrupt) { return }
        foreach ($instance in $SqlInstance) {
            Write-Message -Level Verbose -Message "Connecting to $instance"
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 10
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }
            Write-Message -Level Verbose -Message "Connected to $instance"

            foreach ($row in $server.Query($sql)) {
                [PSCustomObject]@{
                    ComputerName      = $server.NetName
                    InstanceName      = $server.ServiceName
                    SqlInstance       = $server.DomainInstanceName
                    SpinLockName      = $row.name
                    Collisions        = $row.collisions
                    Spins             = $row.spins
                    SpinsPerCollision = $row.spins_per_collision
                    SleepTime         = $row.sleep_time
                    Backoffs          = $row.backoffs
                }
            }
        }
    }
}

tools\dbatools\functions\Get-DbaSpn.ps1

#ValidationTags#FlowControl,Pipeline#
function Get-DbaSpn {
    <#
    .SYNOPSIS
        Returns a list of set service principal names for a given computer/AD account

    .DESCRIPTION
        Get a list of set SPNs. SPNs are set at the AD account level. You can either retrieve set SPNs for a computer, or any SPNs set for
        a given active directory account. You can query one, or both. You'll get a list of every SPN found for either search term.

    .PARAMETER ComputerName
        The servers you want to return set SPNs for. This is defaulted automatically to localhost.

    .PARAMETER AccountName
        The accounts you want to retrieve set SPNs for.

    .PARAMETER Credential
        User credential to connect to the remote servers or active directory.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: SPN
        Author: Drew Furgiuele (@pittfurg), http://www.port1433.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaSpn

    .EXAMPLE
        PS C:\> Get-DbaSpn -ComputerName SQLSERVERA -Credential ad\sqldba

        Returns a custom object with SearchTerm (ServerName) and the SPNs that were found

    .EXAMPLE
        PS C:\> Get-DbaSpn -AccountName domain\account -Credential ad\sqldba

        Returns a custom object with SearchTerm (domain account) and the SPNs that were found

    .EXAMPLE
        PS C:\> Get-DbaSpn -ComputerName SQLSERVERA,SQLSERVERB -Credential ad\sqldba

        Returns a custom object with SearchTerm (ServerName) and the SPNs that were found for multiple computers

    #>
    [cmdletbinding()]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseApprovedVerbs", "", Justification = "Internal functions are ignored")]
    param (
        [Parameter(ValueFromPipeline)]
        [string[]]$ComputerName,
        [string[]]$AccountName,
        [PSCredential]$Credential,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {
        Function Process-Account ($AccountName) {

            ForEach ($account in $AccountName) {
                Write-Message -Message "Looking for account $account..." -Level Verbose
                $searchfor = 'User'
                if ($account.EndsWith('$')) {
                    $searchfor = 'Computer'
                }
                try {
                    $Result = Get-DbaADObject -ADObject $account -Type $searchfor -Credential $Credential -EnableException
                } catch {
                    Write-Message -Message "AD lookup failure. This may be because the domain cannot be resolved for the SQL Server service account ($Account)." -Level Warning
                    continue
                }
                if ($Result.Count -gt 0) {
                    try {
                        $results = $Result.GetUnderlyingObject()
                        $spns = $results.Properties.servicePrincipalName
                    } catch {
                        Write-Message -Message "The SQL Service account ($Account) has been found, but you don't have enough permission to inspect its SPNs" -Level Warning
                        continue
                    }
                } else {
                    Write-Message -Message "The SQL Service account ($Account) has not been found" -Level Warning
                    continue
                }

                foreach ($spn in $spns) {
                    if ($spn -match "\:") {
                        try {
                            $port = [int]($spn -Split "\:")[1]
                        } catch {
                            $port = $null
                        }
                        #Variable marked as unused by PSScriptAnalyzer
                        # if ($spn -match "\/") {
                        #     $serviceclass = ($spn -Split "\/")[0]
                        # }
                    }
                    [pscustomobject] @{
                        Input        = $Account
                        AccountName  = $Account
                        ServiceClass = "MSSQLSvc" # $serviceclass
                        Port         = $port
                        SPN          = $spn
                    }
                }
            }
        }
        if ($ComputerName.Count -eq 0 -and $AccountName.Count -eq 0) {
            $ComputerName = @($env:COMPUTERNAME)
        }
    }

    process {

        foreach ($computer in $ComputerName) {
            if ($computer) {
                if ($computer.EndsWith('$')) {
                    Write-Message -Message "$computer is an account name. Processing as account." -Level Verbose
                    Process-Account -AccountName $computer
                    continue
                }
            }

            Write-Message -Message "Getting SQL Server SPN for $computer" -Level Verbose
            $spns = Test-DbaSpn -ComputerName $computer -Credential $Credential

            $sqlspns = 0
            $spncount = $spns.count
            Write-Message -Message "Calculated $spncount SQL SPN entries that should exist for $computer" -Level Verbose
            foreach ($spn in $spns | Where-Object { $_.IsSet -eq $true }) {
                $sqlspns++

                if ($accountName) {
                    if ($accountName -eq $spn.InstanceServiceAccount) {
                        [pscustomobject] @{
                            Input        = $computer
                            AccountName  = $spn.InstanceServiceAccount
                            ServiceClass = "MSSQLSvc"
                            Port         = $spn.Port
                            SPN          = $spn.RequiredSPN
                        }
                    }
                } else {
                    [pscustomobject] @{
                        Input        = $computer
                        AccountName  = $spn.InstanceServiceAccount
                        ServiceClass = "MSSQLSvc"
                        Port         = $spn.Port
                        SPN          = $spn.RequiredSPN
                    }
                }
            }
            Write-Message -Message "Found $sqlspns set SQL SPN entries for $computer" -Level Verbose
        }

        if ($AccountName) {
            foreach ($account in $AccountName) {
                Process-Account -AccountName $account
            }
        }
    }
}

tools\dbatools\functions\Invoke-DbaAdvancedRestore.ps1

function Invoke-DbaAdvancedRestore {
    <#
    .SYNOPSIS
        Allows the restore of modified BackupHistory Objects
        For 90% of users Restore-DbaDatabase should be your point of access to this function. The other 10% use it at their own risk

    .DESCRIPTION
        This is the final piece in the Restore-DbaDatabase Stack. Usually a BackupHistory object will arrive here from `Restore-Dbadatabase` via the following pipeline:
        `Get-DbaBackupInformation  | Select-DbaBackupInformation | Format-DbaBackupInformation | Test-DbaBackupInformation | Invoke-DbaAdvancedRestore`

        We have exposed these functions publicly to allow advanced users to perform operations that we don't support, or won't add as they would make things too complex for the majority of our users

        For example if you wanted to do some very complex redirection during a migration, then doing the rewrite of destinations may be better done with your own custom scripts rather than via `Format-DbaBackupInformation`

        We would recommend ALWAYS pushing your input through `Test-DbaBackupInformation` just to make sure that it makes sense to us.

    .PARAMETER BackupHistory
        The BackupHistory object to be restored.
        Can be passed in on the pipeline

    .PARAMETER SqlInstance
        The SqlInstance to which the backups should be restored

    .PARAMETER SqlCredential
        SqlCredential to be used to connect to the target SqlInstance

    .PARAMETER OutputScriptOnly
        If set, the restore will not be performed, but the T-SQL scripts to perform it will be returned

    .PARAMETER VerifyOnly
        If set, performs a Verify of the backups rather than a full restore

    .PARAMETER RestoreTime
        Point in Time to which the database should be restored.

        This should be the same value or earlier, as used in the previous pipeline stages

    .PARAMETER StandbyDirectory
        A folder path where a standby file should be created to put the recovered databases in a standby mode

    .PARAMETER NoRecovery
        Leave the database in a restoring state so that further restore may be made

    .PARAMETER MaxTransferSize
        Parameter to set the unit of transfer. Values must be a multiple by 64kb

    .PARAMETER Blocksize
        Specifies the block size to use. Must be one of 0.5kb,1kb,2kb,4kb,8kb,16kb,32kb or 64kb
        Can be specified in bytes
        Refer to https://msdn.microsoft.com/en-us/library/ms178615.aspx for more detail

    .PARAMETER BufferCount
        Number of I/O buffers to use to perform the operation.
        Refer to https://msdn.microsoft.com/en-us/library/ms178615.aspx for more detail

    .PARAMETER Continue
        Indicates that the restore is continuing a restore, so target database must be in Recovering or Standby states

    .PARAMETER AzureCredential
        AzureCredential required to connect to blob storage holding the backups

    .PARAMETER WithReplace
        Indicated that if the database already exists it should be replaced

    .PARAMETER KeepCDC
        Indicates whether CDC information should be restored as part of the database

    .PARAMETER PageRestore
        The output from Get-DbaSuspect page containing the suspect pages to be restored.

    .PARAMETER WhatIf
        Shows what would happen if the cmdlet runs. The cmdlet is not run.

    .PARAMETER Confirm
        Prompts you for confirmation before running the cmdlet.

    .PARAMETER EnableException
        Replaces user friendly yellow warnings with bloody red exceptions of doom!
        Use this if you want the function to throw terminating errors you want to catch.

    .NOTES
        Tags: Restore, Backup
        Author: Stuart Moore (@napalmgram - http://stuart-moore.com)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Invoke-DbaAdvancedRestore

    .EXAMPLE
        PS C:\> $BackupHistory | Invoke-DbaAdvancedRestore -SqlInstance MyInstance

        Will restore all the backups in the BackupHistory object according to the transformations it contains

    .EXAMPLE
        PS C:\> $BackupHistory | Invoke-DbaAdvancedRestore -SqlInstance MyInstance -OutputScriptOnly
        PS C:\> $BackupHistory | Invoke-DbaAdvancedRestore -SqlInstance MyInstance

        First generates just the T-SQL restore scripts so they can be sanity checked, and then if they are good perform the full restore.
        By reusing the BackupHistory object there is no need to rescan all the backup files again

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "Low")]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSAvoidUsingPlainTextForPassword", "AzureCredential", Justification = "For Parameter AzureCredential")]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseOutputTypeCorrectly", "", Justification = "PSSA Rule Ignored by BOH")]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Object[]]$BackupHistory,
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter]$SqlInstance,
        [PSCredential]$SqlCredential,
        [switch]$OutputScriptOnly,
        [switch]$VerifyOnly,
        [datetime]$RestoreTime = (Get-Date).AddDays(2),
        [string]$StandbyDirectory,
        [switch]$NoRecovery,
        [int]$MaxTransferSize,
        [int]$BlockSize,
        [int]$BufferCount,
        [switch]$Continue,
        [string]$AzureCredential,
        [switch]$WithReplace,
        [switch]$KeepCDC,
        [object[]]$PageRestore,
        [switch]$EnableException
    )
    begin {
        try {
            $server = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential
        } catch {
            Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            return
        }
        if ($KeepCDC -and ($NoRecovery -or ('' -ne $StandbyDirectory))) {
            Stop-Function -Category InvalidArgument -Message "KeepCDC cannot be specified with Norecovery or Standby as it needs recovery to work"
            return
        }

        if ($null -ne $PageRestore) {
            Write-Message -Message "Doing Page Recovery" -Level Verbose
            $tmpPages = @()
            foreach ($Page in $PageRestore) {
                $tmppages += "$($Page.FileId):$($Page.PageID)"
            }
            $NoRecovery = $True
            $Pages = $tmpPages -join ','
        }
        $InternalHistory = @()
    }
    process {
        foreach ($bh in $BackupHistory) {
            $InternalHistory += $bh
        }
    }
    end {
        if (Test-FunctionInterrupt) { return }
        $Databases = $InternalHistory.Database | Select-Object -Unique
        foreach ($Database in $Databases) {
            $DatabaseRestoreStartTime = Get-Date
            if ($Database -in $Server.Databases.Name) {
                if (-not $OutputScriptOnly -and -not $VerifyOnly) {
                    if ($Pscmdlet.ShouldProcess("Killing processes in $Database on $SqlInstance as it exists and WithReplace specified  `n", "Cannot proceed if processes exist, ", "Database Exists and WithReplace specified, need to kill processes to restore")) {
                        try {
                            Write-Message -Level Verbose -Message "Killing processes on $Database"
                            $null = Stop-DbaProcess -SqlInstance $Server -Database $Database -WarningAction Silentlycontinue
                            $null = $server.Query("Alter database $Database set offline with rollback immediate; alter database $Database set restricted_user; Alter database $Database set online with rollback immediate", 'master')
                            $server.ConnectionContext.Connect()
                        } catch {
                            Write-Message -Level Verbose -Message "No processes to kill in $Database"
                        }
                    }
                } elseif (-not $WithReplace -and (-not $VerifyOnly)) {
                    Stop-Function -Message "$Database exists and WithReplace not specified, stopping" -EnableException $EnableException
                    return
                }
            }
            Write-Message -Message "WithReplace  = $WithReplace" -Level Debug
            $backups = @($InternalHistory | Where-Object {$_.Database -eq $Database} | Sort-Object -Property Type, FirstLsn)
            $BackupCnt = 1
            foreach ($backup in $backups) {
                $FileRestoreStartTime = Get-Date
                $Restore = New-Object Microsoft.SqlServer.Management.Smo.Restore
                if (($backup -ne $backups[-1]) -or $true -eq $NoRecovery) {
                    $Restore.NoRecovery = $True
                } elseif ($backup -eq $backups[-1] -and '' -ne $StandbyDirectory) {
                    $Restore.StandbyFile = $StandByDirectory + "\" + $Database + (get-date -Format yyyMMddHHmmss) + ".bak"
                    Write-Message -Level Verbose -Message "Setting standby on last file $($Restore.StandbyFile)"
                } else {
                    $Restore.NoRecovery = $False
                }
                if ($restoretime -gt (Get-Date) -or $Restore.RestoreTime -gt (Get-Date) -or $backup.RecoveryModel -eq 'Simple') {
                    $Restore.ToPointInTime = $null
                } else {
                    if ($RestoreTime -ne $Restore.RestoreTime) {
                        $Restore.ToPointInTime = $backup.RestoreTime
                    } else {
                        $Restore.ToPointInTime = $RestoreTime
                    }
                }
                $Restore.Database = $database
                $Restore.ReplaceDatabase = $WithReplace
                if ($MaxTransferSize) {
                    $Restore.MaxTransferSize = $MaxTransferSize
                }
                if ($BufferCount) {
                    $Restore.BufferCount = $BufferCount
                }
                if ($BlockSize) {
                    $Restore.Blocksize = $BlockSize
                }
                if ($true -ne $Continue -and ($null -eq $Pages)) {
                    foreach ($file in $backup.FileList) {
                        $MoveFile = New-Object Microsoft.SqlServer.Management.Smo.RelocateFile
                        $MoveFile.LogicalFileName = $File.LogicalName
                        $MoveFile.PhysicalFileName = $File.PhysicalName
                        $null = $Restore.RelocateFiles.Add($MoveFile)
                    }
                }
                $Action = switch ($backup.Type) {
                    '1' {'Database'}
                    '2' {'Log'}
                    '5' {'Database'}
                    'Transaction Log' {'Log'}
                    Default {'Database'}
                }

                Write-Message -Level Debug -Message "restore action = $Action"
                $Restore.Action = $Action
                foreach ($File in $backup.FullName) {
                    Write-Message -Message "Adding device $file" -Level Debug
                    $Device = New-Object -TypeName Microsoft.SqlServer.Management.Smo.BackupDeviceItem
                    $Device.Name = $file
                    if ($file.StartsWith("http")) {
                        $Device.devicetype = "URL"
                    } else {
                        $Device.devicetype = "File"
                    }

                    if ($AzureCredential) {
                        $Restore.CredentialName = $AzureCredential
                    }

                    $Restore.FileNumber = $backup.Position
                    $Restore.Devices.Add($Device)
                }
                Write-Message -Level Verbose -Message "Performing restore action"
                $ConfirmMessage = "`n Restore Database $Database on $SqlInstance `n from files: $RestoreFileNames `n with these file moves: `n $LogicalFileMovesString `n $ConfirmPointInTime `n"
                if ($Pscmdlet.ShouldProcess("$Database on $SqlInstance `n `n", $ConfirmMessage)) {
                    try {
                        $RestoreComplete = $true
                        if ($KeepCDC -and $Restore.NoRecovery -eq $false) {
                            $script = $Restore.Script($server)
                            if ($script -like '*WITH*') {
                                $script = $script.TrimEnd() + ' , KEEP_CDC'
                            } else {
                                $script = $script.TrimEnd() + ' WITH KEEP_CDC'
                            }
                            if ($true -ne $OutputScriptOnly) {
                                Write-Progress -id 1 -activity "Restoring $Database to $sqlinstance - Backup $BackupCnt of $($Backups.count)" -percentcomplete 0 -status ([System.String]::Format("Progress: {0} %", 0))
                                $null = $server.ConnectionContext.ExecuteNonQuery($script)
                                Write-Progress -id 1 -activity "Restoring $Database to $sqlinstance - Backup $BackupCnt of $($Backups.count)" -status "Complete" -Completed
                            }
                        } elseif ($null -ne $Pages -and $Action -eq 'Database') {
                            $script = $Restore.Script($server)
                            $script = $script -replace "] FROM", "] PAGE='$pages' FROM"
                            if ($true -ne $OutputScriptOnly) {
                                Write-Progress -id 1 -activity "Restoring $Database to $sqlinstance - Backup $BackupCnt of $($Backups.count)" -percentcomplete 0 -status ([System.String]::Format("Progress: {0} %", 0))
                                $null = $server.ConnectionContext.ExecuteNonQuery($script)
                                Write-Progress -id 1 -activity "Restoring $Database to $sqlinstance - Backup $BackupCnt of $($Backups.count)" -status "Complete" -Completed
                            }
                        } elseif ($OutputScriptOnly) {
                            $script = $Restore.Script($server)
                        } elseif ($VerifyOnly) {
                            Write-Message -Message "VerifyOnly restore" -Level Verbose
                            Write-Progress -id 1 -activity "Verifying $Database backup file on $sqlinstance - Backup $BackupCnt of $($Backups.count)" -percentcomplete 0 -status ([System.String]::Format("Progress: {0} %", 0))
                            $Verify = $Restore.SqlVerify($server)
                            Write-Progress -id 1 -activity "Verifying $Database backup file on $sqlinstance - Backup $BackupCnt of $($Backups.count)" -status "Complete" -Completed
                            if ($verify -eq $true) {
                                Write-Message -Message "VerifyOnly restore Succeeded" -Level Verbose
                                return "Verify successful"
                            } else {
                                Write-Message -Message "VerifyOnly restore Failed" -Level Verbose
                                return "Verify failed"
                            }
                        } else {
                            $outerProgress = $BackupCnt / $Backups.Count * 100
                            if ($BackupCnt -eq 1) {
                                Write-Progress -id 1 -Activity "Restoring $Database to $sqlinstance - Backup $BackupCnt of $($Backups.count)" -percentcomplete 0
                            }
                            Write-Progress -id 2 -ParentId 1 -Activity "Restore $($backup.FullName -Join ',')" -percentcomplete 0
                            $script = $Restore.Script($Server)
                            $percentcomplete = [Microsoft.SqlServer.Management.Smo.PercentCompleteEventHandler] {
                                Write-Progress -id 2 -ParentId 1 -Activity "Restore $($backup.FullName -Join ',')" -percentcomplete $_.Percent -status ([System.String]::Format("Progress: {0} %", $_.Percent))
                            }
                            $Restore.add_PercentComplete($percentcomplete)
                            $Restore.PercentCompleteNotification = 1
                            $Restore.SqlRestore($Server)
                            Write-Progress -id 2 -ParentId 1 -Activity "Restore $($backup.FullName -Join ',')" -Completed
                            Write-Progress -id 1 -Activity "Restoring $Database to $sqlinstance - Backup $BackupCnt of $($Backups.count)" -percentcomplete $outerProgress -status ([System.String]::Format("Progress: {0:N2} %", $outerProgress))
                        }
                    } catch {
                        Write-Message -Level Verbose -Message "Failed, Closing Server connection"
                        $RestoreComplete = $False
                        $ExitError = $_.Exception.InnerException
                        Stop-Function -Message "Failed to restore db $Database, stopping" -ErrorRecord $_
                        return
                    } finally {
                        if ($OutputScriptOnly -eq $false) {
                            $pathSep = Get-DbaPathSep -Server $server
                            $RestoreDirectory = ((Split-Path $backup.FileList.PhysicalName -Parent) | Sort-Object -Unique).Replace('\', $pathSep) -Join ','
                            [PSCustomObject]@{
                                ComputerName           = $server.ComputerName
                                InstanceName           = $server.ServiceName
                                SqlInstance            = $server.DomainInstanceName
                                Database               = $backup.Database
                                DatabaseName           = $backup.Database
                                DatabaseOwner          = $server.ConnectionContext.TrueLogin
                                Owner                  = $server.ConnectionContext.TrueLogin
                                NoRecovery             = $Restore.NoRecovery
                                WithReplace            = $WithReplace
                                RestoreComplete        = $RestoreComplete
                                BackupFilesCount       = $backup.FullName.Count
                                RestoredFilesCount     = $backup.Filelist.PhysicalName.count
                                BackupSizeMB           = if ([bool]($backup.psobject.Properties.Name -contains 'TotalSize')) { [Math]::Round(($backup | Measure-Object -Property TotalSize -Sum).Sum / 1mb, 2) } else { $null }
                                CompressedBackupSizeMB = if ([bool]($backup.psobject.Properties.Name -contains 'CompressedBackupSize')) { [Math]::Round(($backup | Measure-Object -Property CompressedBackupSize -Sum).Sum / 1mb, 2) } else { $null }
                                BackupFile             = $backup.FullName -Join ','
                                RestoredFile           = $((Split-Path $backup.FileList.PhysicalName -Leaf) | Sort-Object -Unique) -Join ','
                                RestoredFileFull       = ($backup.Filelist.PhysicalName -Join ',')
                                RestoreDirectory       = $RestoreDirectory
                                BackupSize             = if ([bool]($backup.psobject.Properties.Name -contains 'TotalSize')) { [dbasize](($backup | Measure-Object -Property TotalSize -Sum).Sum) } else { $null }
                                CompressedBackupSize   = if ([bool]($backup.psobject.Properties.Name -contains 'CompressedBackupSize')) { [dbasize](($backup | Measure-Object -Property CompressedBackupSize -Sum).Sum) } else { $null }
                                Script                 = $script
                                BackupFileRaw          = ($backups.Fullname)
                                FileRestoreTime        = New-TimeSpan -Seconds ((Get-Date) - $FileRestoreStartTime).TotalSeconds
                                DatabaseRestoreTime    = New-TimeSpan -Seconds ((Get-Date) - $DatabaseRestoreStartTime).TotalSeconds
                                ExitError              = $ExitError
                            } | Select-DefaultView -Property ComputerName, InstanceName, SqlInstance, BackupFile, BackupFilesCount, BackupSize, CompressedBackupSize, Database, Owner, DatabaseRestoreTime, FileRestoreTime, NoRecovery, RestoreComplete, RestoredFile, RestoredFilesCount, Script, RestoreDirectory, WithReplace
                        } else {
                            $script
                        }
                        if ($Restore.Devices.Count -gt 0) {
                            $Restore.Devices.Clear()
                        }
                        Write-Message -Level Verbose -Message "Succeeded, Closing Server connection"
                        $server.ConnectionContext.Disconnect()
                    }
                }
                $BackupCnt++
            }
            Write-Progress -id 2 -Activity "Finished" -Completed
            if ($server.ConnsectionContext.exists) {
                $server.ConnectionContext.Disconnect()
            }
            Write-Progress -id 1 -Activity "Finished" -Completed
        }
    }
}

tools\dbatools\functions\Invoke-DbaAgFailover.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Invoke-DbaAgFailover {
    <#
    .SYNOPSIS
        Failover an availability group.

    .DESCRIPTION
       Failover an availability group.

    .PARAMETER SqlInstance
        The SQL Server instance. Server version must be SQL Server version 2012 or higher.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential).

    .PARAMETER AvailabilityGroup
        Only failover specific availability groups.

    .PARAMETER InputObject
        Enables piping from Get-DbaAvailabilityGroup

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER Force
        Force Failover and allow data loss

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: AG, AvailabilityGroup, HA
        Author: Chrissy LeMaire (@cl), netnerds.net
        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Invoke-DbaAgFailover

    .EXAMPLE
        PS C:\> Invoke-DbaAgFailover -SqlInstance sql2017 -AvailabilityGroup SharePoint

        Safely (no potential data loss) fails over the SharePoint AG to sql2017. Prompts for confirmation.

    .EXAMPLE
        PS C:\> Get-DbaAvailabilityGroup -SqlInstance sql2017 | Out-GridView -Passthru | Invoke-DbaAgFailover -Confirm:$false

        Safely (no potential data loss) fails over the selected availability groups to sql2017. Does not prompt for confirmation.

    .EXAMPLE
        PS C:\> Invoke-DbaAgFailover -SqlInstance sql2017 -AvailabilityGroup SharePoint -Force

        Forcefully (with potential data loss) fails over the SharePoint AG to sql2017. Prompts for confirmation.
    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'High')]
    param (
        [parameter(Mandatory)]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$AvailabilityGroup,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.AvailabilityGroup[]]$InputObject,
        [switch]$Force,
        [switch]$EnableException
    )
    process {
        if ($SqlInstance -and -not $AvailabilityGroup) {
            Stop-Function -Message "You must specify at least one availability group when using SqlInstance."
            return
        }

        if ($SqlInstance) {
            $InputObject += Get-DbaAvailabilityGroup -SqlInstance $SqlInstance -SqlCredential $SqlCredential -AvailabilityGroup $AvailabilityGroup
        }

        foreach ($ag in $InputObject) {
            try {
                $server = $ag.Parent
                if ($Force) {
                    if ($Pscmdlet.ShouldProcess($server.Name, "Forcefully failing over $($ag.Name), allowing potential data loss")) {
                        $ag.FailoverWithPotentialDataLoss()
                        $ag.Refresh()
                        $ag
                    }
                } else {
                    if ($Pscmdlet.ShouldProcess($server.Name, "Gracefully failing over $($ag.Name)")) {
                        $ag.Failover()
                        $ag.Refresh()
                        $ag
                    }
                }
            } catch {
                Stop-Function -Continue -Message "Failure" -ErrorRecord $_
            }
        }
    }
}

tools\dbatools\functions\Invoke-DbaBalanceDataFiles.ps1

function Invoke-DbaBalanceDataFiles {
    <#
    .SYNOPSIS
        Re-balance data between data files

    .DESCRIPTION
        When you have a large database with a single data file and add another file, SQL Server will only use the new file until it's about the same size.
        You may want to balance the data between all the data files.

        The function will check the server version and edition to see if the it allows for online index rebuilds.
        If the server does support it, it will try to rebuild the index online.
        If the server doesn't support it, it will rebuild the index offline. Be carefull though, this can cause downtime

        The tables must have a clustered index to be able to balance out the data.
        The function does NOT yet support heaps.

        The function will also check if the file groups are subject to balance out.
        A file group whould have at least have 2 data files and should be writable.
        If a table is within such a file group it will be subject for processing. If not the table will be skipped.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The database(s) to process.

    .PARAMETER Table
        The tables(s) of the database to process. If unspecified, all tables will be processed.

    .PARAMETER RebuildOffline
        Will set all the indexes to rebuild offline.
        This option is also needed when the server version is below 2005.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run

    .PARAMETER Confirm
        Prompts for confirmation of every step. For example:

        The server does not support online rebuilds of indexes.
        Do you want to rebuild the indexes offline?
        [Y] Yes  [N] No   [?] Help (default is "Y"):

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER Force
        This will disable the check for enough disk space for the action to be successful.
        Use this with caution!!

    .NOTES
        Tags: Database, FileManagement, File, Space
        Author: Sander Stad (@sqlstad), sqlstad.nl

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Invoke-DbaBalanceDataFiles -SqlInstance sql1 -Database db1

        This command will distribute the data in database db1 on instance sql1

    .EXAMPLE
        PS C:\> Invoke-DbaBalanceDataFiles -SqlInstance sql1 -Database db1 | Select-Object -ExpandProperty DataFilesEnd

        This command will distribute the data in database db1 on instance sql1

    .EXAMPLE
        PS C:\> Invoke-DbaBalanceDataFiles -SqlInstance sql1 -Database db1 -Table table1,table2,table5

        This command will distribute the data for only the tables table1,table2 and table5

    .EXAMPLE
        PS C:\> Invoke-DbaBalanceDataFiles -SqlInstance sql1 -Database db1 -RebuildOffline

        This command will consider the fact that there might be a SQL Server edition that does not support online rebuilds of indexes.
        By supplying this parameter you give permission to do the rebuilds offline if the edition does not support it.

    #>
    [CmdletBinding(DefaultParameterSetName = "Default", SupportsShouldProcess)]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseSingularNouns", "", Justification = "Singular Noun doesn't make sense")]
    param (
        [parameter(ParameterSetName = "Pipe", Mandatory)]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [Alias("Tables")]
        [object[]]$Table,
        [switch]$RebuildOffline,
        [switch]$EnableException,
        [switch]$Force
    )

    process {

        Write-Message -Message "Starting balancing out data files" -Level Verbose

        # Set the initial success flag
        [bool]$success = $true

        foreach ($instance in $sqlinstance) {
            # Try connecting to the instance
            try {
                $Server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            # Check the database parameter
            if ($Database) {
                if ($Database -notin $server.Databases.Name) {
                    Stop-Function -Message "One or more databases cannot be found on instance on instance $instance" -Target $instance -Continue
                }

                $DatabaseCollection = $server.Databases | Where-Object { $_.Name -in $Database }
            } else {
                Stop-Function -Message "Please supply a database to balance out" -Target $instance -Continue
            }

            # Get the server version
            $serverVersion = $server.Version.Major

            # Check edition of the sql instance
            if ($RebuildOffline) {
                Write-Message -Message "Continuing with offline rebuild." -Level Verbose
            } elseif (-not $RebuildOffline -and ($serverVersion -lt 9 -or (([string]$Server.Edition -notmatch "Developer") -and ($Server.Edition -notmatch "Enterprise")))) {
                # Set up the confirm part
                $message = "The server does not support online rebuilds of indexes. `nDo you want to rebuild the indexes offline?"
                $choiceYes = New-Object System.Management.Automation.Host.ChoiceDescription "&Yes", "Answer Yes."
                $choiceNo = New-Object System.Management.Automation.Host.ChoiceDescription "&No", "Answer No."
                $options = [System.Management.Automation.Host.ChoiceDescription[]]($choiceYes, $choiceNo)
                $result = $host.ui.PromptForChoice($title, $message, $options, 0)

                # Check the result from the confirm
                switch ($result) {
                    # If yes
                    0 {
                        # Set the option to generate a full backup
                        Write-Message -Message "Continuing with offline rebuild." -Level Verbose

                        [bool]$supportOnlineRebuild = $false
                    }
                    1 {
                        Stop-Function -Message "You chose to not allow offline rebuilds of indexes. Use -RebuildOffline" -Target $instance
                        return
                    }
                } # switch
            } elseif ($serverVersion -ge 9 -and (([string]$Server.Edition -like "Developer*") -or ($Server.Edition -like "Enterprise*"))) {
                [bool]$supportOnlineRebuild = $true
            }

            # Loop through each of the databases
            foreach ($db in $DatabaseCollection) {
                $dataFilesStarting = Get-DbaDbFile -SqlInstance $server -Database $db.Name | Where-Object { $_.TypeDescription -eq 'ROWS' } | Select-Object ID, LogicalName, PhysicalName, Size, UsedSpace, AvailableSpace | Sort-Object ID

                if (-not $Force) {
                    # Check the amount of disk space available
                    $query = "SELECT SUBSTRING(physical_name, 0, 4) AS 'Drive' ,
                                        SUM(( size * 8 ) / 1024) AS 'SizeMB'
                                FROM	sys.master_files
                                WHERE	DB_NAME(database_id) = '$($db.Name)'
                                GROUP BY SUBSTRING(physical_name, 0, 4)"
                    # Execute the query
                    $dbDiskUsage = $Server.Query($query)

                    # Get the free space for each drive
                    $result = $Server.Query("xp_fixeddrives")
                    $MbFreeColName = $result[0].psobject.Properties.Name[1]
                    $diskFreeSpace = $result | Select-Object Drive, @{ Name = 'FreeMB'; Expression = { $_.$MbFreeColName } }

                    # Loop through each of the drives to see if the size of files on that
                    # particular disk do not exceed the free space of that disk
                    foreach ($d in $dbDiskUsage) {
                        $freeSpace = $diskFreeSpace | Where-Object { $_.Drive -eq $d.Drive.Trim(':\') } | Select-Object FreeMB
                        if ($d.SizeMB -gt $freeSpace.FreeMB) {
                            # Set the success flag
                            $success = $false

                            Stop-Function -Message "The available space may not be sufficient to continue the process. Please use -Force to try anyway." -Target $instance -Continue
                            return
                        }
                    }
                }

                # Create the start time
                $start = Get-Date

                # Check if the function needs to continue
                if ($success) {

                    # Get the database files before all the alterations
                    Write-Message -Message "Retrieving data files before data move" -Level Verbose
                    Write-Message -Message "Processing database $db" -Level Verbose

                    # Check the datafiles of the database
                    $dataFiles = Get-DbaDbFile -SqlInstance $instance -Database $db | Where-Object { $_.TypeDescription -eq 'ROWS' }
                    if ($dataFiles.Count -eq 1) {
                        # Set the success flag
                        $success = $false

                        Stop-Function -Message "Database $db only has one data file. Please add a data file to balance out the data" -Target $instance -Continue
                    }

                    # Check the tables parameter
                    if ($Table) {
                        if ($Table -notin $db.Table) {
                            # Set the success flag
                            $success = $false

                            Stop-Function -Message "One or more tables cannot be found in database $db on instance $instance" -Target $instance -Continue
                        }

                        $TableCollection = $db.Tables | Where-Object { $_.Name -in $Table }
                    } else {
                        $TableCollection = $db.Tables
                    }

                    # Get the database file groups and check the aount of data files
                    Write-Message -Message "Retrieving file groups" -Level Verbose
                    $fileGroups = $Server.Databases[$db.Name].FileGroups

                    # ARray to hold the file groups with properties
                    $balanceableTables = @()

                    # Loop through each of the file groups

                    foreach ($fg in $fileGroups) {

                        # If there is less than 2 files balancing out data is not possible
                        if (($fg.Files.Count -ge 2) -and ($fg.Readonly -eq $false)) {
                            $balanceableTables += $fg.EnumObjects() | Where-Object { $_.GetType().Name -eq 'Table' }
                        }
                    }

                    $unsuccessfulTables = @()

                    # Loop through each of the tables
                    foreach ($tbl in $TableCollection) {

                        # Chck if the table balanceable
                        if ($tbl.Name -in $balanceableTables.Name) {

                            Write-Message -Message "Processing table $tbl" -Level Verbose

                            # Chck the tables and get the clustered indexes
                            if ($TableCollection.Indexes.Count -lt 1) {
                                # Set the success flag
                                $success = $false

                                Stop-Function -Message "Table $tbl does not contain any indexes" -Target $instance -Continue
                            } else {

                                # Get all the clustered indexes for the table
                                $clusteredIndexes = $TableCollection.Indexes | Where-Object { $_.IndexType -eq 'ClusteredIndex' }

                                if ($clusteredIndexes.Count -lt 1) {
                                    # Set the success flag
                                    $success = $false

                                    Stop-Function -Message "No clustered indexes found in table $tbl" -Target $instance -Continue
                                }
                            }

                            # Loop through each of the clustered indexes and rebuild them
                            Write-Message -Message "$($clusteredIndexes.Count) clustered index(es) found for table $tbl" -Level Verbose
                            if ($PSCmdlet.ShouldProcess("Rebuilding indexes to balance data")) {
                                foreach ($ci in $clusteredIndexes) {

                                    Write-Message -Message "Rebuilding index $($ci.Name)" -Level Verbose

                                    # Get the original index operation
                                    [bool]$originalIndexOperation = $ci.OnlineIndexOperation

                                    # Set the rebuild option to be either offline or online
                                    if ($RebuildOffline) {
                                        $ci.OnlineIndexOperation = $false
                                    } elseif ($serverVersion -ge 9 -and $supportOnlineRebuild -and -not $RebuildOffline) {
                                        Write-Message -Message "Setting the index operation for index $($ci.Name) to online" -Level Verbose
                                        $ci.OnlineIndexOperation = $true
                                    }

                                    # Rebuild the index
                                    try {
                                        Write-Message -Message "Rebuilding index $($ci.Name)" -Level Verbose
                                        $ci.Rebuild()

                                        # Set the success flag
                                        $success = $true
                                    } catch {
                                        # Set the original index operation back for the index
                                        $ci.OnlineIndexOperation = $originalIndexOperation

                                        # Set the success flag
                                        $success = $false

                                        Stop-Function -Message "Something went wrong rebuilding index $($ci.Name). `n$($_.Exception.Message)" -ErrorRecord $_ -Target $instance -Continue
                                    }

                                    # Set the original index operation back for the index
                                    Write-Message -Message "Setting the index operation for index $($ci.Name) back to the original value" -Level Verbose
                                    $ci.OnlineIndexOperation = $originalIndexOperation

                                } # foreach index

                            } # if process

                        } # if table is balanceable
                        else {
                            # Add the table to the unsuccessful array
                            $unsuccessfulTables += $tbl.Name

                            # Set the success flag
                            $success = $false

                            Write-Message -Message "Table $tbl cannot be balanced out" -Level Verbose
                        }

                    } #foreach table
                }

                # Create the end time
                $end = Get-Date

                # Create the time span
                $timespan = New-TimeSpan -Start $start -End $end
                $ts = [timespan]::fromseconds($timespan.TotalSeconds)
                $elapsed = "{0:HH:mm:ss}" -f ([datetime]$ts.Ticks)

                # Get the database files after all the alterations
                Write-Message -Message "Retrieving data files after data move" -Level Verbose
                $dataFilesEnding = Get-DbaDbFile -SqlInstance $server -Database $db.Name | Where-Object { $_.TypeDescription -eq 'ROWS' } | Select-Object ID, LogicalName, PhysicalName, Size, UsedSpace, AvailableSpace | Sort-Object ID

                [pscustomobject]@{
                    ComputerName   = $server.ComputerName
                    InstanceName   = $server.ServiceName
                    SqlInstance    = $server.DomainInstanceName
                    Database       = $db.Name
                    Start          = $start
                    End            = $end
                    Elapsed        = $elapsed
                    Success        = $success
                    Unsuccessful   = $unsuccessfulTables -join ","
                    DataFilesStart = $dataFilesStarting
                    DataFilesEnd   = $dataFilesEnding
                }

            } # foreach database

        } # end process
    }
}

tools\dbatools\functions\Invoke-DbaCycleErrorLog.ps1

function Invoke-DbaCycleErrorLog {
    <#
    .SYNOPSIS
        Cycles the current instance or agent log.

    .DESCRIPTION
        Cycles the current error log for the instance (SQL Server) and/or SQL Server Agent.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.You must have sysadmin access and server version must be SQL Server version 2000 or higher.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Type
        The log to cycle.
        Accepts: instance or agent.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Log, Cycle
        Author: Shawn Melton (@wsmelton), https://wsmelton.github.io

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Invoke-DbaCycleLog

    .EXAMPLE
        PS C:\> Invoke-DbaCycleLog -SqlInstance sql2016 -Type agent

        Cycles the current error log for the SQL Server Agent on SQL Server instance sql2016

    .EXAMPLE
        PS C:\> Invoke-DbaCycleLog -SqlInstance sql2016 -Type instance

        Cycles the current error log for the SQL Server instance on SQL Server instance sql2016

    .EXAMPLE
        PS C:\> Invoke-DbaCycleLog -SqlInstance sql2016

        Cycles the current error log for both SQL Server instance and SQL Server Agent on SQL Server instance sql2016

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'Low')]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [ValidateSet('instance', 'agent')]
        [string]$Type,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        if (Test-Bound 'Type') {
            if ($Type -notin 'instance', 'agent') {
                Stop-Function -Message "The type provided [$Type] for $SqlInstance is not an accepted value. Please use 'Instance' or 'Agent'"
                return
            }
        }
        $logToCycle = @()
        switch ($Type) {
            'agent' {
                $sql = "EXEC msdb.dbo.sp_cycle_agent_errorlog;"
                $logToCycle = $Type
            }
            'instance' {
                $sql = "EXEC master.dbo.sp_cycle_errorlog;"
                $logToCycle = $Type
            }
            default {
                $sql = "
                    EXEC master.dbo.sp_cycle_errorlog;
                    EXEC msdb.dbo.sp_cycle_agent_errorlog;"
                $logToCycle = 'instance', 'agent'
            }
        }

    }
    process {
        if (Test-FunctionInterrupt) { return }

        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            try {
                $logs = $logToCycle -join ','
                if ($Pscmdlet.ShouldProcess($server, "Cycle the log(s): $logs")) {
                    $null = $server.Query($sql)
                    [pscustomobject]@{
                        ComputerName = $server.ComputerName
                        InstanceName = $server.ServiceName
                        SqlInstance  = $server.DomainInstanceName
                        LogType      = $logToCycle
                        IsSuccessful = $true
                        Notes        = $null
                    }
                }
            } catch {
                [pscustomobject]@{
                    ComputerName = $server.ComputerName
                    InstanceName = $server.ServiceName
                    SqlInstance  = $server.DomainInstanceName
                    LogType      = $logToCycle
                    IsSuccessful = $false
                    Notes        = $_.Exception
                }
                Stop-Function -Message "Issue cycling $logs on $server" -Target $server -ErrorRecord $_ -Exception $_.Exception -Continue
            }
        }
    }
}

tools\dbatools\functions\Invoke-DbaDbccFreeCache.ps1

function Invoke-DbaDbccFreeCache {
    <#
    .SYNOPSIS
        Execution of Database Console Commands that clear Server level Memory caches

    .DESCRIPTION
        Allows execution of Database Console Commands that act at Server Level to clear Memory caches

        Allows execution of the following commands
            DBCC FREEPROCCACHE
            DBCC FREESESSIONCACHE
            DBCC FREESYSTEMCACHE

        Read more:
            - https://docs.microsoft.com/en-us/sql/t-sql/database-console-commands/dbcc-freeproccache-transact-sql
            - https://docs.microsoft.com/en-us/sql/t-sql/database-console-commands/dbcc-freesessioncache-transact-sql
            - https://docs.microsoft.com/en-us/sql/t-sql/database-console-commands/dbcc-freesystemcache-transact-sql

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Operation
        DBCC Operation to Perform - Supports specific set of operations

    .PARAMETER InputValue
        Value used for Operation - meaning depends on Operation
        DBCC FREEPROCCACHE accepts
            a plan_handle of type varbinary(64)
            a sql_handle of type varbinary(64)
            or the name of a Resource Governor resource pool of type sysname
            If blank then clears all elements from the plan cache
        DBCC FREESYSTEMCACHE accepts
            'ALL' for ALL specifies all supported caches
            or name of a Resource Governor pool cache
        Not required for other values

    .PARAMETER NoInformationalMessages
        Suppresses all informational messages.

    .PARAMETER MarkInUseForRemoval
        Used when Operation = DBCC FREESYSTEMCACHE
        Asynchronously frees currently used entries from their respective caches after they become unused

    .PARAMETER WhatIf
        Shows what would happen if the cmdlet runs. The cmdlet is not run.

    .PARAMETER Confirm
        Prompts you for confirmation before running the cmdlet.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: DBCC
        Author: Patrick Flynn (@sqllensman)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Invoke-DbaDbccFreeCache

    .EXAMPLE
        PS C:\> Invoke-DbaDbccFreeCache -SqlInstance SqlServer2017 -Operation FREEPROCCACHE

        Runs the command DBCC FREEPROCCACHE against the instance SqlServer2017 using Windows Authentication

    .EXAMPLE
        PS C:\> Invoke-DbaDbccFreeCache -SqlInstance SqlServer2017 -Operation FREESESSIONCACHE -NoInformationalMessages

        Runs the command DBCC FREESESSIONCACHE WITH NO_INFOMSGS against the instance SqlServer2017 using Windows Authentication

    .EXAMPLE
        PS C:\> Invoke-DbaDbccFreeCache -SqlInstance SqlServer2017 -Operation FREESYSTEMCACHE -NoInformationalMessages

        Runs the command DBCC FREESYSTEMCACHE WITH NO_INFOMSGS against the instance SqlServer2017 using Windows Authentication

    .EXAMPLE
        PS C:\> Invoke-DbaDbccFreeCache -SqlInstance SqlServer2017 -Operation FREEPROCCACHE -InputValue 0x060006001ECA270EC0215D05000000000000000000000000

        Remove a specific plan with plan_handle 0x060006001ECA270EC0215D05000000000000000000000000 from the cache via the command DBCC FREEPROCCACHE(0x060006001ECA270EC0215D05000000000000000000000000) against the instance SqlServer2017 using Windows Authentication

    .EXAMPLE
        PS C:\> Invoke-DbaDbccFreeCache -SqlInstance SqlServer2017 -Operation FREEPROCCACHE -InputValue default

        Runs the command DBCC FREEPROCCACHE('default') against the instance SqlServer2017 using Windows Authentication. This clears all cache entries associated with a resource pool 'default'.

    .EXAMPLE
        PS C:\> Invoke-DbaDbccFreeCache -SqlInstance SqlServer2017 -Operation FREESYSTEMCACHE -InputValue default

        Runs the command DBCC FREESYSTEMCACHE ('ALL', default) against the instance SqlServer2017 using Windows Authentication. This will clean all the caches with entries specific to the resource pool named "default".

    .EXAMPLE
        PS C:\> Invoke-DbaDbccFreeCache -SqlInstance SqlServer2017 -Operation FREESYSTEMCACHE -InputValue default -MarkInUseForRemoval

        Runs the command DBCC FREESYSTEMCACHE ('ALL', default) WITH MARK_IN_USE_FOR_REMOVAL against the instance SqlServer2017 using Windows Authentication. This will to release entries once the entries become unused for all the caches with entries specific to the resource pool named "default".

    #>
    [CmdletBinding(DefaultParameterSetName = "Default", SupportsShouldProcess, ConfirmImpact = 'High')]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [ValidateSet('FreeProcCache', 'FreeSessionCache', 'FreeSystemCache')]
        [string]$Operation = "FreeProcCache",
        [string]$InputValue,
        [switch]$NoInformationalMessages,
        [switch]$MarkInUseForRemoval,
        [switch]$EnableException
    )
    begin {

        if (Test-Bound -ParameterName Operation) {
            $Operation = $Operation.ToUpper()
        } else {
            Write-Message -Level Warning -Message "You must specify an operation "
            continue
        }

        $stringBuilder = New-Object System.Text.StringBuilder
        if ($Operation -eq 'FREESESSIONCACHE') {
            $null = $stringBuilder.Append("DBCC $Operation")
            if (Test-Bound -ParameterName NoInformationalMessages) {
                $null = $stringBuilder.Append(" WITH NO_INFOMSGS")
            }
        }
        if ($Operation -eq 'FREEPROCCACHE') {
            if (Test-Bound -ParameterName InputValue) {
                if ($InputValue.StartsWith('0x')) {
                    $null = $stringBuilder.Append("DBCC $Operation($InputValue)")
                } else {
                    $null = $stringBuilder.Append("DBCC $Operation('$InputValue')")
                }
                if (Test-Bound -ParameterName NoInformationalMessages) {
                    $null = $stringBuilder.Append(" WITH NO_INFOMSGS")
                }
            } else {
                $null = $stringBuilder.Append("DBCC $Operation")
                if (Test-Bound -ParameterName NoInformationalMessages) {
                    $null = $stringBuilder.Append(" WITH NO_INFOMSGS")
                }
            }
        }
        if ($Operation -eq 'FREESYSTEMCACHE') {
            if (Test-Bound -ParameterName InputValue) {
                $null = $stringBuilder.Append("DBCC FREESYSTEMCACHE('ALL', $InputValue)")
            } else {
                $null = $stringBuilder.Append("DBCC FREESYSTEMCACHE('ALL')")
            }
            if (Test-Bound -ParameterName NoInformationalMessages) {
                if (Test-Bound -ParameterName MarkInUseForRemoval) {
                    $null = $stringBuilder.Append(" WITH NO_INFOMSGS, MARK_IN_USE_FOR_REMOVAL")
                } else {
                    $null = $stringBuilder.Append(" WITH NO_INFOMSGS")
                }
            } elseif (Test-Bound -ParameterName MarkInUseForRemoval) {
                $null = $stringBuilder.Append(" WITH MARK_IN_USE_FOR_REMOVAL")
            }
        }
    }
    process {
        $query = $StringBuilder.ToString()

        foreach ($instance in $SqlInstance) {
            Write-Message -Message "Attempting Connection to $instance" -Level Verbose
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            try {
                if ($Pscmdlet.ShouldProcess($server.Name, "Execute the command $query against $instance")) {
                    Write-Message -Message "Query to run: $query" -Level Verbose
                    $results = $server | Invoke-DbaQuery  -Query $query -MessagesToOutput
                }
            } catch {
                Stop-Function -Message "Failure" -ErrorRecord $_ -Target $server -Continue
            }
            If ($Pscmdlet.ShouldProcess("console", "Outputting object")) {
                [PSCustomObject]@{
                    ComputerName = $server.ComputerName
                    InstanceName = $server.ServiceName
                    SqlInstance  = $server.DomainInstanceName
                    Operation    = $Operation
                    Cmd          = $query.ToString()
                    Output       = $results
                }
            }
        }
    }
}

tools\dbatools\functions\Invoke-DbaDbClone.ps1

function Invoke-DbaDbClone {
    <#
    .SYNOPSIS
        Clones a database schema and statistics

    .DESCRIPTION
        Clones a database schema and statistics.

        This can be useful for testing query performance without requiring all the space needed for the data in the database.

        Read more:
            - https://sqlperformance.com/2016/08/sql-statistics/expanding-dbcc-clonedatabase
            - https://support.microsoft.com/en-us/help/3177838/how-to-use-dbcc-clonedatabase-to-generate-a-schema-and-statistics-only

        Thanks to Microsoft Tiger Team for the code and idea https://github.com/Microsoft/tigertoolbox/

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The database to clone - this list is auto-populated from the server.

    .PARAMETER InputObject
        Enables piping from Get-DbaDatabase

    .PARAMETER CloneDatabase
        The name(s) to clone to.

    .PARAMETER ExcludeStatistics
        Exclude the statistics in the cloned database

    .PARAMETER ExcludeQueryStore
        Exclude the QueryStore data in the cloned database

    .PARAMETER UpdateStatistics
        Update the statistics prior to cloning (per Microsoft Tiger Team formula)

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.
    
    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Statistics, Performance, Clone
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Invoke-DbaDbClone

    .EXAMPLE
        PS C:\> Invoke-DbaDbClone -SqlInstance sql2016 -Database mydb -CloneDatabase myclone

        Clones mydb to myclone on sql2016

    .EXAMPLE
        PS C:\> Get-DbaDatabase -SqlInstance sql2016 -Database mydb | Invoke-DbaDbClone -CloneDatabase myclone, myclone2 -UpdateStatistics

        Updates the statistics of mydb then clones to myclone and myclone2
        
#>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'Medium')]
    param (
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$Database,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Database[]]$InputObject,
        [string[]]$CloneDatabase,
        [switch]$ExcludeStatistics,
        [switch]$ExcludeQueryStore,
        [switch]$UpdateStatistics,
        [switch]$EnableException
    )

    begin {
        if (-not $Database -and $SqlInstance) {
            Stop-Function -Message "You must specify a database name if you did not pipe a database"
        }

        $sqlStats = "DECLARE @out TABLE(id INT IDENTITY(1,1), s SYSNAME, o SYSNAME, i SYSNAME, stats_stream VARBINARY(MAX), rows BIGINT, pages BIGINT)
            DECLARE @dbcc TABLE(stats_stream VARBINARY(MAX), rows BIGINT, pages BIGINT)
            DECLARE c CURSOR FOR
                    SELECT OBJECT_SCHEMA_NAME(object_id) s, OBJECT_NAME(object_id) o, name i
                    FROM sys.indexes
                    WHERE type_desc IN ('CLUSTERED COLUMNSTORE', 'NONCLUSTERED COLUMNSTORE')
            DECLARE @s SYSNAME, @o SYSNAME, @i SYSNAME
            OPEN c
            FETCH NEXT FROM c INTO @s, @o, @i
            WHILE @@FETCH_STATUS = 0
            BEGIN
                DECLARE @showStats NVARCHAR(MAX) = N'DBCC SHOW_STATISTICS(""' + QUOTENAME(@s) + '.' + QUOTENAME(@o) + '"", ' + QUOTENAME(@i) + ') WITH stats_stream'
                INSERT @dbcc EXEC sp_executesql @showStats
                INSERT @out SELECT @s, @o, @i, stats_stream, rows, pages FROM @dbcc
                DELETE @dbcc
                FETCH NEXT FROM c INTO @s, @o, @i
            END
            CLOSE c
            DEALLOCATE c

            DECLARE @sql NVARCHAR(MAX);
            DECLARE @id INT;
            SELECT TOP 1 @id=id,@sql=
            'UPDATE STATISTICS ' + QUOTENAME(s) + '.' + QUOTENAME(o)  + '(' + QUOTENAME(i)
            + ') WITH stats_stream = ' + CONVERT(NVARCHAR(MAX), stats_stream, 1)
            + ', rowcount = ' + CONVERT(NVARCHAR(MAX), rows) + ', pagecount = '  + CONVERT(NVARCHAR(MAX), pages)
            FROM @out

            WHILE (@@ROWCOUNT <> 0)
            BEGIN
                EXEC sp_executesql @sql
                DELETE @out WHERE id = @id
                SELECT TOP 1 @id=id,@sql=
                'UPDATE STATISTICS ' + QUOTENAME(s) + '.' + QUOTENAME(o)  + '(' + QUOTENAME(i)
                + ') WITH stats_stream = ' + CONVERT(NVARCHAR(MAX), stats_stream, 1)
                + ', rowcount = ' + CONVERT(NVARCHAR(MAX), rows) + ', pagecount = '  + CONVERT(NVARCHAR(MAX), pages)
                FROM @out
            END
        "

        $noStats = "NO_STATISTICS"
        $noQueryStore = "NO_QUERYSTORE"
        if ( (Test-Bound -ParameterName 'ExcludeStatistics') -or (Test-Bound -ParameterName 'ExcludeQueryStore') ) {
            $sqlWith = ""
            if ($ExcludeStatistics) {
                $sqlWith = "WITH $noStats"
            }
            if ($ExcludeQueryStore) {
                $sqlWith = "WITH $noQueryStore"
            }
            if ($ExcludeStatistics -and $ExcludeQueryStore) {
                $sqlWith = "WITH $noStats,$noQueryStore"
            }
        }
        
        $sql2012min = [version]"11.0.7001.0" # SQL 2012 SP4
        $sql2014min = [version]"12.0.5000.0" # SQL 2014 SP2
        $sql2014CuMin = [version]"12.0.5538" # SQL 2014 SP2 + CU3
        $sql2016min = [version]"13.0.4001.0" # SQL 2016 SP1
    }
    process {
        if (Test-FunctionInterrupt) { return }
        
        if ($SqlInstance) {
            $InputObject += Get-DbaDatabase -SqlInstance $SqlInstance -SqlCredential $SqlCredential
        }
        
        foreach ($db in $InputObject) {
            $server = $db.Parent

            if ($server.VersionMajor -eq 11 -and $server.Version -lt $sql2012min) {
                Stop-Function -Message "Unsupported version for $instance. SQL Server 2012 SP4 and above required." -Target $server -Continue
            }

            if ($server.VersionMajor -eq 12 -and $server.Version -lt $sql2014min) {
                Stop-Function -Message "Unsupported version for $instance. SQL Server 2014 SP2 and above required." -Target $server -Continue
            }

            if ($server.VersionMajor -eq 13 -and $server.Version -lt $sql2016min) {
                Stop-Function -Message "Unsupported version for $instance. SQL Server 2016 SP1 and above required." -Target $server -Continue
            }

            if (Test-Bound -ParameterName 'ExcludeStatistics') {
                if ($server.VersionMajor -eq 12 -and $server.Version -lt $sql2014CuMin) {
                    Stop-Function -Message "Unsupported version for $instance. SQL Server 2014 SP1 + CU3 and above required." -Target $server -Continue
                }
                if ($server.VersionMajor -eq 13 -and $server.Version -lt $sql2016min) {
                    Stop-Function -Message "Unsupported version for $instance. SQL Server 2016 SP1 and above required." -Target $server -Continue
                }
            }

            if (Test-Bound -ParameterName 'ExcludeQueryStore') {
                if ($server.VersionMajor -lt 13 - ($server.VersionMajor -eq 13 -and $server.Version -lt $sql2016min)) {
                    Stop-Function -Message "Unsupported version for $instance. SQL Server 2016 SP1 and above required." -Target $server -Continue
                }
            }

            if ($db.IsSystemObject) {
                Stop-Function -Message "Only user databases are supported" -Target $instance -Continue
            }

            if ( (Test-Bound -ParameterName 'UpdateStatistics') -and (Test-Bound -ParameterName 'ExcludeStatistics' -Not) ) {
                if ($Pscmdlet.ShouldProcess($instance, "Update statistics in $($db.Name)")) {
                    try {
                        Write-Message -Level Verbose -Message "Updating statistics"
                        $null = $db.Query($sqlStats)
                    } catch {
                        Stop-Function -Message "Failure" -ErrorRecord $_ -Target $server -Continue
                    }
                }
            }

            $dbName = $db.Name

            foreach ($clonedb in $CloneDatabase) {
                Write-Message -Level Verbose -Message "Cloning $clonedb from $db"
                if ($server.Databases[$clonedb]) {
                    Stop-Function -Message "Destination clone database $clonedb already exists" -Target $instance -Continue
                } else {
                    if ($Pscmdlet.ShouldProcess($instance, "Execute DBCC CloneDatabase($dbName, $clonedb)")) {
                        try {
                            $sql = "DBCC CLONEDATABASE('$dbName','$clonedb') $sqlWith"
                            Write-Message -Level Debug -Message "Sql Statement: $sql"
                            $null = $db.Query($sql)
                            Get-DbaDatabase -SqlInstance $server -Database $clonedb
                        } catch {
                            Stop-Function -Message "Failure" -ErrorRecord $_ -Target $server -Continue
                        }
                    }
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Invoke-DbaDatabaseClone
    }
}

tools\dbatools\functions\Invoke-DbaDbDecryptObject.ps1

function Invoke-DbaDbDecryptObject {
    <#
    .SYNOPSIS
        Invoke-DbaDbDecryptObject returns the decrypted version of an object

    .DESCRIPTION
        When a procedure or a function is created with encryption and you lost the code you're in trouble.
        You cannot alter the object or view the definition.
        With this command you can search for the object and decrypt the it.

        The command will output the results to the console.
        There is an option to export all the results to a folder creating .sql files.

        Make sure the instance allowed dedicated administrator connections (DAC).
        The binary versions of the objects can only be retrieved using a DAC connection.
        You can check the DAC connection with:
        'Get-DbaSpConfigure -SqlInstance [yourinstance] -ConfigName RemoteDacConnectionsEnabled'
        It should say 1 in the ConfiguredValue.

        To change the configurations you can use the Set-DbaSpConfigure command:
        'Set-DbaSpConfigure -SqlInstance [yourinstance] -ConfigName RemoteDacConnectionsEnabled -Value 1'
        In some cases you may need to reboot the instance.

    .PARAMETER SqlInstance
        The target SQL Server instance

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        Database to look through for the object.

    .PARAMETER ObjectName
        The name of the object to search for in the database.

    .PARAMETER EncodingType
        The encoding that's used to decrypt and encrypt values.

    .PARAMETER ExportDestination
        Used for exporting the results to.
        The destiation will use the instance name, database name and object type i.e.: C:\temp\decrypt\SQLDB1\DB1\StoredProcedure

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Encryption, Decrypt, Database
        Author: Sander Stad (@sqlstad), sqlstad.nl

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Invoke-DbaDbDecryptObject

    .EXAMPLE
        PS C:\> Invoke-DbaDbDecryptObject -SqlInstance SQLDB1 -Database DB1 -ObjectName Function1

        Decrypt object "Function1" in DB1 of instance SQLDB1 and output the data to the user.

    .EXAMPLE
        PS C:\> Invoke-DbaDbDecryptObject -SqlInstance SQLDB1 -Database DB1 -ObjectName Function1 -ExportDestination C:\temp\decrypt

        Decrypt object "Function1" in DB1 of instance SQLDB1 and output the data to the folder "C:\temp\decrypt".

    .EXAMPLE
        PS C:\> Invoke-DbaDbDecryptObject -SqlInstance SQLDB1 -Database DB1 -ExportDestination C:\temp\decrypt

        Decrypt all objects in DB1 of instance SQLDB1 and output the data to the folder "C:\temp\decrypt"

    .EXAMPLE
        PS C:\> Invoke-DbaDbDecryptObject -SqlInstance SQLDB1 -Database DB1 -ObjectName Function1, Function2

        Decrypt objects "Function1" and "Function2" and output the data to the user.

    .EXAMPLE
        PS C:\> "SQLDB1" | Invoke-DbaDbDecryptObject -Database DB1 -ObjectName Function1, Function2

        Decrypt objects "Function1" and "Function2" and output the data to the user using a pipeline for the instance.

    #>
    [CmdletBinding()]
    param(
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter]$SqlInstance,
        [PSCredential]$SqlCredential,
        [parameter(Mandatory)]
        [object[]]$Database,
        [string[]]$ObjectName,
        [ValidateSet('ASCII', 'UTF8')]
        [string]$EncodingType = 'ASCII',
        [string]$ExportDestination,
        [switch]$EnableException
    )

    begin {

        function Invoke-DecryptData() {
            param(
                [parameter(Mandatory)]
                [byte[]]$Secret,
                [parameter(Mandatory)]
                [byte[]]$KnownPlain,
                [parameter(Mandatory)]
                [byte[]]$KnownSecret
            )

            # Declare pointers
            [int]$i = 0

            # Loop through each of the characters and apply an XOR to decrypt the data
            $result = $(

                # Loop through the byte string
                while ($i -lt $Secret.Length) {

                    # Compare the byte string character to the key character using XOR
                    if ($i -lt $Secret.Length) {
                        $Secret[$i] -bxor $KnownPlain[$i] -bxor $KnownSecret[$i]
                    }

                    # Increment the byte string indicator
                    $i += 2

                } # end while loop

            ) # end data value

            # Get the string value from the data
            $decryptedData = $Encoding.GetString($result)

            # Return the decrypted data
            return $decryptedData
        }

        # Create array list to hold the results
        $objectCollection = New-Object System.Collections.ArrayList

        # Set the encoding
        if ($EncodingType -eq 'ASCII') {
            $encoding = [System.Text.Encoding]::ASCII
        } elseif ($EncodingType -eq 'UTF8') {
            $encoding = [System.Text.Encoding]::UTF8
        }

        # Check the export parameter
        if ($ExportDestination -and -not (Test-Path $ExportDestination)) {
            try {
                # Create the new destination
                New-Item -Path $ExportDestination -ItemType Directory -Force | Out-Null
            } catch {
                Stop-Function -Message "Couldn't create destination folder $ExportDestination" -ErrorRecord $_ -Target $instance -Continue
            }
        }

    }

    process {

        if (Test-FunctionInterrupt) { return }

        # Loop through all the instances
        foreach ($instance in $SqlInstance) {

            # Check the configuration of the intance to see if the DAC is enabled
            $config = Get-DbaSpConfigure -SqlInstance $instance -ConfigName RemoteDacConnectionsEnabled
            if ($config.ConfiguredValue -ne 1) {
                Stop-Function -Message "DAC is not enabled for instance $instance.`nPlease use 'Set-DbaSpConfigure -SqlInstance $instance -ConfigName RemoteDacConnectionsEnabled -Value 1' to configure the instance to allow DAC connections" -Target $instance -Continue
            }

            # Try to connect to instance
            try {
                $server = New-Object Microsoft.SqlServer.Management.Smo.Server "ADMIN:$instance"
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            # Get all the databases that compare to the database parameter
            $databaseCollection = $server.Databases | Where-Object {$_.Name -in $Database}

            # Loop through each of databases
            foreach ($db in $databaseCollection) {
                # Get the objects
                if ($ObjectName) {
                    $storedProcedures = @($db.StoredProcedures | Where-Object {$_.Name -in $ObjectName -and $_.IsEncrypted -eq $true} | Select-Object Name, Schema, @{N = "ObjectType"; E = {'StoredProcedure'}}, @{N = "SubType"; E = {''}})
                    $functions = @($db.UserDefinedFunctions | Where-Object {$_.Name -in $ObjectName -and $_.IsEncrypted -eq $true} | Select-Object Name, Schema, @{N = "ObjectType"; E = {"UserDefinedFunction"}}, @{N = "SubType"; E = {$_.FunctionType.ToString().Trim()}})
                    $views = @($db.Views | Where-Object {$_.Name -in $ObjectName -and $_.IsEncrypted -eq $true} | Select-Object Name, Schema, @{N = "ObjectType"; E = {'View'}}, @{N = "SubType"; E = {''}})
                } else {
                    # Get all encrypted objects
                    $storedProcedures = @($db.StoredProcedures | Where-Object {$_.IsEncrypted -eq $true} | Select-Object Name, Schema, @{N = "ObjectType"; E = {'StoredProcedure'}}, @{N = "SubType"; E = {''}})
                    $functions = @($db.UserDefinedFunctions | Where-Object {$_.IsEncrypted -eq $true} | Select-Object Name, Schema, @{N = "ObjectType"; E = {"UserDefinedFunction"}}, @{N = "SubType"; E = {$_.FunctionType.ToString().Trim()}})
                    $views = @($db.Views | Where-Object {$_.IsEncrypted -eq $true} | Select-Object Name, Schema, @{N = "ObjectType"; E = {'View'}}, @{N = "SubType"; E = {''}})
                }

                <# Get all the objects
                $storedProcedures = @($db.StoredProcedures | Where-Object {$_.Name -in $ObjectName -and $_.IsEncrypted -eq $true} | Select-Object Name, Schema, @{N = "ObjectType"; E = {'StoredProcedure'}}, @{N = "SubType"; E = {''}})
                $functions = @($db.UserDefinedFunctions | Where-Object {$_.Name -in $ObjectName -and $_.IsEncrypted -eq $true} | Select-Object Name, Schema, @{N = "ObjectType"; E = {"UserDefinedFunction"}}, @{N = "SubType"; E = {$_.FunctionType.ToString().Trim()}})
                $views = @($db.Views | Where-Object {$_.Name -in $ObjectName -and $_.IsEncrypted -eq $true} | Select-Object Name, Schema, @{N = "ObjectType"; E = {'View'}}, @{N = "SubType"; E = {''}})
                #>

                # Check if there are any objects
                if ($storedProcedures.Count -ge 1) {
                    $objectCollection += $storedProcedures
                }
                if ($functions.Count -ge 1) {
                    $objectCollection += $functions
                }
                if ($views.Count -ge 1) {
                    $objectCollection += $views
                }

                # Loop through all the objects
                foreach ($object in $objectCollection) {

                    # Setup the query to get the secret
                    $querySecret = "SELECT imageval AS Value FROM sys.sysobjvalues WHERE objid = OBJECT_ID('$($object.Name)')"

                    # Get the result of the secret query
                    try {
                        $secret = $server.Databases[$db.Name].Query($querySecret)
                    } catch {
                        Stop-Function -Message "Couldn't retrieve secret from $instance" -ErrorRecord $_ -Target $instance -Continue
                    }

                    # Check if at least a value came back
                    if ($secret) {

                        # Setup a known plain command and get the binary version of it
                        switch ($object.ObjectType) {

                            'StoredProcedure' {
                                $queryKnownPlain = (" " * $secret.Value.Length) + "ALTER PROCEDURE $($object.Schema).$($object.Name) WITH ENCRYPTION AS RETURN 0;"
                            }
                            'UserDefinedFunction' {

                                switch ($object.SubType) {
                                    'Inline' {
                                        $queryKnownPlain = (" " * $secret.value.length) + "ALTER FUNCTION $($object.Schema).$($object.Name)() RETURNS TABLE WITH ENCRYPTION AS BEGIN RETURN SELECT 0 i END;"
                                    }
                                    'Scalar' {
                                        $queryKnownPlain = (" " * $secret.value.length) + "ALTER FUNCTION $($object.Schema).$($object.Name)() RETURNS INT WITH ENCRYPTION AS BEGIN RETURN 0 END;"
                                    }
                                    'Table' {
                                        $queryKnownPlain = (" " * $secret.value.length) + "ALTER FUNCTION $($object.Schema).$($object.Name)() RETURNS @r TABLE(i INT) WITH ENCRYPTION AS BEGIN RETURN END;"
                                    }
                                }
                            }
                            'View' {
                                $queryKnownPlain = (" " * $secret.Value.Length) + "ALTER VIEW $($object.Schema).$($object.Name) WITH ENCRYPTION AS SELECT NULL AS [Value];"
                            }
                        }

                        # Convert the known plain into binary
                        if ($queryKnownPlain) {
                            try {
                                $knownPlain = $encoding.GetBytes(($queryKnownPlain))
                            } catch {
                                Stop-Function -Message "Couldn't convert the known plain to binary" -ErrorRecord $_ -Target $instance -Continue
                            }
                        } else {
                            Stop-Function -Message "Something went wrong setting up the known plain" -ErrorRecord $_ -Target $instance -Continue
                        }

                        # Setup the query to change the object in SQL Server and roll it back getting the encrypted version
                        $queryKnownSecret = "
                            BEGIN TRANSACTION;
                                EXEC ('$queryKnownPlain');
                                SELECT imageval AS Value
                                FROM sys.sysobjvalues
                                WHERE objid = OBJECT_ID('$($object.Name)');
                            ROLLBACK;
                        "

                        # Get the result for the known encrypted
                        try {
                            $knownSecret = $server.Databases[$db.Name].Query($queryKnownSecret)
                        } catch {
                            Stop-Function -Message "Couldn't retrieve known secret from $instance" -ErrorRecord $_ -Target $instance -Continue
                        }

                        # Get the result
                        $result = Invoke-DecryptData -Secret $secret.value -KnownPlain $knownPlain -KnownSecret $knownSecret.value

                        # Check if the results need to be exported
                        if ($ExportDestination) {
                            # make up the file name
                            $filename = "$($object.Schema).$($object.Name).sql"

                            # Check the export destination
                            if ($ExportDestination.EndsWith("\")) {
                                $destinationFolder = "$ExportDestination$instance\$($db.Name)\$($object.ObjectType)\"
                            } else {
                                $destinationFolder = "$ExportDestination\$instance\$($db.Name)\$($object.ObjectType)\"
                            }

                            # Check if the destination folder exists
                            if (-not (Test-Path $destinationFolder)) {
                                try {
                                    # Create the new destination
                                    New-Item -Path $destinationFolder -ItemType Directory -Force:$Force | Out-Null
                                } catch {
                                    Stop-Function -Message "Couldn't create destination folder $destinationFolder" -ErrorRecord $_ -Target $instance -Continue
                                }
                            }

                            # Combine the destination folder and the file name to get the path
                            $filePath = $destinationFolder + $filename

                            # Export the result
                            try {
                                $result | Out-File -FilePath $filePath -Force
                            } catch {
                                Stop-Function -Message "Couldn't export the results of $($object.Name) to $filePath" -ErrorRecord $_ -Target $instance -Continue
                            }

                        }

                        # Add the results to the custom object
                        [PSCustomObject]@{
                            ComputerName = $server.ComputerName
                            InstanceName = $server.ServiceName
                            SqlInstance  = $server.DomainInstanceName
                            Database     = $db.Name
                            Type         = $object.ObjectType
                            Schema       = $object.Schema
                            Name         = $object.Name
                            FullName     = "$($object.Schema).$($object.Name)"
                            Script       = $result
                        }

                    } # end if secret

                } # end for each object

            } # end for each database

        } # end for each instance

    } # process

    end {
        if (Test-FunctionInterrupt) { return }

        Write-Message -Message "Finished decrypting data" -Level Verbose
    }
}

tools\dbatools\functions\Invoke-DbaDbLogShipping.ps1

function Invoke-DbaDbLogShipping {
    <#
    .SYNOPSIS
        Invoke-DbaDbLogShipping sets up log shipping for one or more databases

    .DESCRIPTION
        Invoke-DbaDbLogShipping helps to easily set up log shipping for one or more databases.

        This function will make a lot of decisions for you assuming you want default values like a daily interval for the schedules with a 15 minute interval on the day.
        There are some settings that cannot be made by the function and they need to be prepared before the function is executed.

        The following settings need to be made before log shipping can be initiated:
        - Backup destination (the folder and the privileges)
        - Copy destination (the folder and the privileges)

        * Privileges
        Make sure your agent service on both the primary and the secondary instance is an Active Directory account.
        Also have the credentials ready to set the folder permissions

        ** Network share
        The backup destination needs to be shared and have the share privileges of FULL CONTROL to Everyone.

        ** NTFS permissions
        The backup destination must have at least read/write permissions for the primary instance agent account.
        The backup destination must have at least read permissions for the secondary instance agent account.
        The copy destination must have at least read/write permission for the secondary instance agent acount.

    .PARAMETER SourceSqlInstance
        Source SQL Server instance which contains the databases to be log shipped.
        You must have sysadmin access and server version must be SQL Server version 2000 or greater.

    .PARAMETER DestinationSqlInstance
        Destination SQL Server instance which contains the databases to be log shipped.
        You must have sysadmin access and server version must be SQL Server version 2000 or greater.

    .PARAMETER SourceSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER SourceCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER DestinationSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER DestinationCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        Database to set up log shipping for.

    .PARAMETER BackupNetworkPath
        The backup unc path to place the backup files. This is the root directory.
        A directory with the name of the database will be created in this path.

    .PARAMETER BackupLocalPath
        If the backup path is locally for the source server you can also set this value.

    .PARAMETER BackupJob
        Name of the backup that will be created in the SQL Server agent.
        The parameter works as a prefix where the name of the database will be added to the backup job name.
        The default is "LSBackup_[databasename]"

    .PARAMETER BackupRetention
        The backup retention period in minutes. Default is 4320 / 72 hours

    .PARAMETER BackupSchedule
        Name of the backup schedule created for the backup job.
        The parameter works as a prefix where the name of the database will be added to the backup job schedule name.
        Default is "LSBackupSchedule_[databasename]"

    .PARAMETER BackupScheduleDisabled
        Parameter to set the backup schedule to disabled upon creation.
        By default the schedule is enabled.

    .PARAMETER BackupScheduleFrequencyType
        A value indicating when a job is to be executed.
        Allowed values are "Daily", "AgentStart", "IdleComputer"

    .PARAMETER BackupScheduleFrequencyInterval
        The number of type periods to occur between each execution of the backup job.

    .PARAMETER BackupScheduleFrequencySubdayType
        Specifies the units for the sub-day FrequencyInterval.
        Allowed values are "Time", "Seconds", "Minutes", "Hours"

    .PARAMETER BackupScheduleFrequencySubdayInterval
        The number of sub-day type periods to occur between each execution of the backup job.

    .PARAMETER BackupScheduleFrequencyRelativeInterval
        A job's occurrence of FrequencyInterval in each month, if FrequencyInterval is 32 (monthlyrelative).

    .PARAMETER BackupScheduleFrequencyRecurrenceFactor
        The number of weeks or months between the scheduled execution of a job. FrequencyRecurrenceFactor is used only if FrequencyType is 8, "Weekly", 16, "Monthly", 32 or "MonthlyRelative".

    .PARAMETER BackupScheduleStartDate
        The date on which execution of a job can begin.

    .PARAMETER BackupScheduleEndDate
        The date on which execution of a job can stop.

    .PARAMETER BackupScheduleStartTime
        The time on any day to begin execution of a job. Format HHMMSS / 24 hour clock.
        Example: '010000' for 01:00:00 AM.
        Example: '140000' for 02:00:00 PM.

    .PARAMETER BackupScheduleEndTime
        The time on any day to end execution of a job. Format HHMMSS / 24 hour clock.
        Example: '010000' for 01:00:00 AM.
        Example: '140000' for 02:00:00 PM.

    .PARAMETER BackupThreshold
        Is the length of time, in minutes, after the last backup before a threshold alert error is raised.
        The default is 60.

    .PARAMETER CompressBackup
        Do the backups need to be compressed. By default the backups are not compressed.

    .PARAMETER CopyDestinationFolder
        The path to copy the transaction log backup files to. This is the root directory.
        A directory with the name of the database will be created in this path.

    .PARAMETER CopyJob
        Name of the copy job that will be created in the SQL Server agent.
        The parameter works as a prefix where the name of the database will be added to the copy job name.
        The default is "LSBackup_[databasename]"

    .PARAMETER CopyRetention
        The copy retention period in minutes. Default is 4320 / 72 hours

    .PARAMETER CopySchedule
        Name of the backup schedule created for the copy job.
        The parameter works as a prefix where the name of the database will be added to the copy job schedule name.
        Default is "LSCopy_[DestinationServerName]_[DatabaseName]"

    .PARAMETER CopyScheduleDisabled
        Parameter to set the copy schedule to disabled upon creation.
        By default the schedule is enabled.

    .PARAMETER CopyScheduleFrequencyType
        A value indicating when a job is to be executed.
        Allowed values are "Daily", "AgentStart", "IdleComputer"

    .PARAMETER CopyScheduleFrequencyInterval
        The number of type periods to occur between each execution of the copy job.

    .PARAMETER CopyScheduleFrequencySubdayType
        Specifies the units for the subday FrequencyInterval.
        Allowed values are "Time", "Seconds", "Minutes", "Hours"

    .PARAMETER CopyScheduleFrequencySubdayInterval
        The number of subday type periods to occur between each execution of the copy job.

    .PARAMETER CopyScheduleFrequencyRelativeInterval
        A job's occurrence of FrequencyInterval in each month, if FrequencyInterval is 32 (monthlyrelative).

    .PARAMETER CopyScheduleFrequencyRecurrenceFactor
        The number of weeks or months between the scheduled execution of a job. FrequencyRecurrenceFactor is used only if FrequencyType is 8, "Weekly", 16, "Monthly", 32 or "MonthlyRelative".

    .PARAMETER CopyScheduleStartDate
        The date on which execution of a job can begin.

    .PARAMETER CopyScheduleEndDate
        The date on which execution of a job can stop.

    .PARAMETER CopyScheduleStartTime
        The time on any day to begin execution of a job. Format HHMMSS / 24 hour clock.
        Example: '010000' for 01:00:00 AM.
        Example: '140000' for 02:00:00 PM.

    .PARAMETER CopyScheduleEndTime
        The time on any day to end execution of a job. Format HHMMSS / 24 hour clock.
        Example: '010000' for 01:00:00 AM.
        Example: '140000' for 02:00:00 PM.

    .PARAMETER DisconnectUsers
        If this parameter is set in combinations of standby the users will be disconnected during restore.

    .PARAMETER FullBackupPath
        Path to an existing full backup. Use this when an existing backup needs to used to initialize the database on the secondary instance.

    .PARAMETER GenerateFullBackup
        If the database is not initialized on the secondary instance it can be done by creating a new full backup and
        restore it for you.

    .PARAMETER HistoryRetention
        Is the length of time in minutes in which the history is retained.
        The default value is 14420

    .PARAMETER NoRecovery
        If this parameter is set the database will be in recovery mode. The database will not be readable.
        This setting is default.

    .PARAMETER NoInitialization
        If this parameter is set the secondary database will not be initialized.
        The database needs to be on the secondary instance in recovery mode.

    .PARAMETER PrimaryMonitorServer
        Is the name of the monitor server for the primary server.
        The default is the name of the primary sql server.

    .PARAMETER PrimaryMonitorCredential
        Allows you to login to enter a secure credential. Only needs to be used when the PrimaryMonitorServerSecurityMode is 0 or "sqlserver"
        To use: $scred = Get-Credential, then pass $scred object to the -PrimaryMonitorCredential parameter.

    .PARAMETER PrimaryMonitorServerSecurityMode
        The security mode used to connect to the monitor server for the primary server. Allowed values are 0, "sqlserver", 1, "windows"
        The default is 1 or Windows.

    .PARAMETER PrimaryThresholdAlertEnabled
        Enables the Threshold alert for the primary database

    .PARAMETER RestoreDataFolder
        Folder to be used to restore the database data files. Only used when parameter GenerateFullBackup or UseExistingFullBackup are set.
        If the parameter is not set the default data folder of the secondary instance will be used including the name of the database.
        If the folder is set but doesn't exist the default data folder of the secondary instance will be used including the name of the database.

    .PARAMETER RestoreLogFolder
        Folder to be used to restore the database log files. Only used when parameter GenerateFullBackup or UseExistingFullBackup are set.
        If the parameter is not set the default transaction log folder of the secondary instance will be used.
        If the folder is set but doesn't exist the default transaction log folder of the secondary instance will be used.

    .PARAMETER RestoreDelay
        In case a delay needs to be set for the restore.
        The default is 0.

    .PARAMETER RestoreAlertThreshold
        The amount of minutes after which an alert will be raised is no restore has taken place.
        The default is 45 minutes.

    .PARAMETER RestoreJob
        Name of the restore job that will be created in the SQL Server agent.
        The parameter works as a prefix where the name of the database will be added to the restore job name.
        The default is "LSRestore_[databasename]"

    .PARAMETER RestoreRetention
        The backup retention period in minutes. Default is 4320 / 72 hours

    .PARAMETER RestoreSchedule
        Name of the backup schedule created for the restore job.
        The parameter works as a prefix where the name of the database will be added to the restore job schedule name.
        Default is "LSRestore_[DestinationServerName]_[DatabaseName]"

    .PARAMETER RestoreScheduleDisabled
        Parameter to set the restore schedule to disabled upon creation.
        By default the schedule is enabled.

    .PARAMETER RestoreScheduleFrequencyType
        A value indicating when a job is to be executed.
        Allowed values are "Daily", "AgentStart", "IdleComputer"

    .PARAMETER RestoreScheduleFrequencyInterval
        The number of type periods to occur between each execution of the restore job.

    .PARAMETER RestoreScheduleFrequencySubdayType
        Specifies the units for the subday FrequencyInterval.
        Allowed values are "Time", "Seconds", "Minutes", "Hours"

    .PARAMETER RestoreScheduleFrequencySubdayInterval
        The number of subday type periods to occur between each execution of the restore job.

    .PARAMETER RestoreScheduleFrequencyRelativeInterval
        A job's occurrence of FrequencyInterval in each month, if FrequencyInterval is 32 (monthlyrelative).

    .PARAMETER RestoreScheduleFrequencyRecurrenceFactor
        The number of weeks or months between the scheduled execution of a job. FrequencyRecurrenceFactor is used only if FrequencyType is 8, "Weekly", 16, "Monthly", 32 or "MonthlyRelative".

    .PARAMETER RestoreScheduleStartDate
        The date on which execution of a job can begin.

    .PARAMETER RestoreScheduleEndDate
        The date on which execution of a job can stop.

    .PARAMETER RestoreScheduleStartTime
        The time on any day to begin execution of a job. Format HHMMSS / 24 hour clock.
        Example: '010000' for 01:00:00 AM.
        Example: '140000' for 02:00:00 PM.

    .PARAMETER RestoreScheduleEndTime
        The time on any day to end execution of a job. Format HHMMSS / 24 hour clock.
        Example: '010000' for 01:00:00 AM.
        Example: '140000' for 02:00:00 PM.

    .PARAMETER RestoreThreshold
        The number of minutes allowed to elapse between restore operations before an alert is generated.
        The default value = 0

    .PARAMETER SecondaryDatabasePrefix
        The secondary database can be renamed to include a prefix.

    .PARAMETER SecondaryDatabaseSuffix
        The secondary database can be renamed to include a suffix.

    .PARAMETER SecondaryMonitorServer
        Is the name of the monitor server for the secondary server.
        The default is the name of the secondary sql server.

    .PARAMETER SecondaryMonitorCredential
        Allows you to login to enter a secure credential. Only needs to be used when the SecondaryMonitorServerSecurityMode is 0 or "sqlserver"
        To use: $scred = Get-Credential, then pass $scred object to the -SecondaryMonitorCredential parameter.

    .PARAMETER SecondaryMonitorServerSecurityMode
        The security mode used to connect to the monitor server for the secondary server. Allowed values are 0, "sqlserver", 1, "windows"
        The default is 1 or Windows.

    .PARAMETER SecondaryThresholdAlertEnabled
        Enables the Threshold alert for the secondary database

    .PARAMETER Standby
        If this parameter is set the database will be set to standby mode making the database readable.
        If not set the database will be in recovery mode.

    .PARAMETER StandbyDirectory
        Directory to place the standby file(s) in

    .PARAMETER UseExistingFullBackup
        If the database is not initialized on the secondary instance it can be done by selecting an existing full backup
        and restore it for you.

    .PARAMETER UseBackupFolder
        This enables the user to specify a specific backup folder containing one or more backup files to initialize the database on the secondary instance.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        Use this switch to disable any kind of verbose messages

    .PARAMETER Force
        The force parameter will ignore some errors in the parameters and assume defaults.
        It will also remove the any present schedules with the same name for the specific job.

    .NOTES
        Tags: LogShipping
        Author: Sander Stad (@sqlstad), sqlstad.nl

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Invoke-DbaDbLogShipping

    .EXAMPLE
        PS C:\> $params = @{
        >> SourceSqlInstance = 'sql1'
        >> DestinationSqlInstance = 'sql2'
        >> Database = 'db1'
        >> BackupNetworkPath= '\\sql1\logshipping'
        >> BackupLocalPath= 'D:\Data\logshipping'
        >> BackupScheduleFrequencyType = 'daily'
        >> BackupScheduleFrequencyInterval = 1
        >> CompressBackup = $true
        >> CopyScheduleFrequencyType = 'daily'
        >> CopyScheduleFrequencyInterval = 1
        >> GenerateFullBackup = $true
        >> RestoreScheduleFrequencyType = 'daily'
        >> RestoreScheduleFrequencyInterval = 1
        >> SecondaryDatabaseSuffix = 'DR'
        >> CopyDestinationFolder = '\\sql2\logshippingdest'
        >> Force = $true
        >> }
        >>
        PS C:\> Invoke-DbaDbLogShipping @params

        Sets up log shipping for database "db1" with the backup path to a network share allowing local backups.
        It creates daily schedules for the backup, copy and restore job with all the defaults to be executed every 15 minutes daily.
        The secondary database will be called "db1_LS".

    .EXAMPLE
        PS C:\> $params = @{
        >> SourceSqlInstance = 'sql1'
        >> DestinationSqlInstance = 'sql2'
        >> Database = 'db1'
        >> BackupNetworkPath= '\\sql1\logshipping'
        >> GenerateFullBackup = $true
        >> Force = $true
        >> }
        >>
        PS C:\> Invoke-DbaDbLogShipping @params

        Sets up log shipping with all defaults except that a backup file is generated.
        The script will show a message that the copy destination has not been supplied and asks if you want to use the default which would be the backup directory of the secondary server with the folder "logshipping" i.e. "D:\SQLBackup\Logshiping".

    #>
    [CmdletBinding(DefaultParameterSetName = "Default", SupportsShouldProcess)]

    param(
        [parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [Alias("SourceServerInstance", "SourceSqlServerSqlServer", "Source")]
        [object]$SourceSqlInstance,

        [parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [Alias("DestinationServerInstance", "DestinationSqlServer", "Destination")]
        [object[]]$DestinationSqlInstance,

        [System.Management.Automation.PSCredential]
        $SourceSqlCredential,

        [System.Management.Automation.PSCredential]
        $SourceCredential,

        [System.Management.Automation.PSCredential]
        $DestinationSqlCredential,

        [System.Management.Automation.PSCredential]
        $DestinationCredential,

        [Parameter(Mandatory, ValueFromPipeline)]
        [object[]]$Database,

        [parameter(Mandatory)]
        [string]$BackupNetworkPath,

        [string]$BackupLocalPath,

        [string]$BackupJob,

        [int]$BackupRetention,

        [string]$BackupSchedule,

        [switch]$BackupScheduleDisabled,

        [ValidateSet("Daily", "Weekly", "AgentStart", "IdleComputer")]
        [object]$BackupScheduleFrequencyType,

        [object[]]$BackupScheduleFrequencyInterval,

        [ValidateSet('Time', 'Seconds', 'Minutes', 'Hours')]
        [object]$BackupScheduleFrequencySubdayType,

        [int]$BackupScheduleFrequencySubdayInterval,

        [ValidateSet('Unused', 'First', 'Second', 'Third', 'Fourth', 'Last')]
        [object]$BackupScheduleFrequencyRelativeInterval,

        [int]$BackupScheduleFrequencyRecurrenceFactor,

        [string]$BackupScheduleStartDate,

        [string]$BackupScheduleEndDate,

        [string]$BackupScheduleStartTime,

        [string]$BackupScheduleEndTime,

        [int]$BackupThreshold,

        [switch]$CompressBackup,

        [string]$CopyDestinationFolder,

        [string]$CopyJob,

        [int]$CopyRetention,

        [string]$CopySchedule,

        [switch]$CopyScheduleDisabled,

        [ValidateSet("Daily", "Weekly", "AgentStart", "IdleComputer")]
        [object]$CopyScheduleFrequencyType,

        [object[]]$CopyScheduleFrequencyInterval,

        [ValidateSet('Time', 'Seconds', 'Minutes', 'Hours')]
        [object]$CopyScheduleFrequencySubdayType,

        [int]$CopyScheduleFrequencySubdayInterval,

        [ValidateSet('Unused', 'First', 'Second', 'Third', 'Fourth', 'Last')]
        [object]$CopyScheduleFrequencyRelativeInterval,

        [int]$CopyScheduleFrequencyRecurrenceFactor,

        [string]$CopyScheduleStartDate,

        [string]$CopyScheduleEndDate,

        [string]$CopyScheduleStartTime,

        [string]$CopyScheduleEndTime,

        [switch]$DisconnectUsers,

        [string]$FullBackupPath,

        [switch]$GenerateFullBackup,

        [int]$HistoryRetention,

        [switch]$NoRecovery,

        [switch]$NoInitialization,

        [string]$PrimaryMonitorServer,

        [System.Management.Automation.PSCredential]
        $PrimaryMonitorCredential,

        [ValidateSet(0, "sqlserver", 1, "windows")]
        [object]$PrimaryMonitorServerSecurityMode,

        [switch]$PrimaryThresholdAlertEnabled,

        [string]$RestoreDataFolder,

        [string]$RestoreLogFolder,

        [int]$RestoreDelay,

        [int]$RestoreAlertThreshold,

        [string]$RestoreJob,

        [int]$RestoreRetention,

        [string]$RestoreSchedule,

        [switch]$RestoreScheduleDisabled,

        [ValidateSet("Daily", "Weekly", "AgentStart", "IdleComputer")]
        [object]$RestoreScheduleFrequencyType,

        [object[]]$RestoreScheduleFrequencyInterval,

        [ValidateSet('Time', 'Seconds', 'Minutes', 'Hours')]
        [object]$RestoreScheduleFrequencySubdayType,

        [int]$RestoreScheduleFrequencySubdayInterval,

        [ValidateSet('Unused', 'First', 'Second', 'Third', 'Fourth', 'Last')]
        [object]$RestoreScheduleFrequencyRelativeInterval,

        [int]$RestoreScheduleFrequencyRecurrenceFactor,

        [string]$RestoreScheduleStartDate,

        [string]$RestoreScheduleEndDate,

        [string]$RestoreScheduleStartTime,

        [string]$RestoreScheduleEndTime,

        [int]$RestoreThreshold,

        [string]$SecondaryDatabasePrefix,

        [string]$SecondaryDatabaseSuffix,

        [string]$SecondaryMonitorServer,

        [System.Management.Automation.PSCredential]
        $SecondaryMonitorCredential,

        [ValidateSet(0, "sqlserver", 1, "windows")]
        [object]$SecondaryMonitorServerSecurityMode,

        [switch]$SecondaryThresholdAlertEnabled,

        [switch]$Standby,

        [string]$StandbyDirectory,

        [switch]$UseExistingFullBackup,

        [string]$UseBackupFolder,

        [switch]$Force,

        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        Write-Message -Message "Started log shipping for $SourceSqlInstance to $DestinationSqlInstance" -Level Verbose

        # Try connecting to the instance
        try {
            $SourceServer = Connect-SqlInstance -SqlInstance $SourceSqlInstance -SqlCredential $SourceSqlCredential
        } catch {
            Stop-Function -Message "Could not connect to Sql Server instance $SourceSqlInstance" -ErrorRecord $_ -Target $SourceSqlInstance
            return
        }


        # Check the instance if it is a named instance
        $SourceServerName, $SourceInstanceName = $SourceSqlInstance.Split("\")

        if ($null -eq $SourceInstanceName) {
            $SourceInstanceName = "MSSQLSERVER"
        }

        # Set up regex strings for several checks
        $RegexDate = '(?<!\d)(?:(?:(?:1[6-9]|[2-9]\d)?\d{2})(?:(?:(?:0[13578]|1[02])31)|(?:(?:0[1,3-9]|1[0-2])(?:29|30)))|(?:(?:(?:(?:1[6-9]|[2-9]\d)?(?:0[48]|[2468][048]|[13579][26])|(?:(?:16|[2468][048]|[3579][26])00)))0229)|(?:(?:1[6-9]|[2-9]\d)?\d{2})(?:(?:0?[1-9])|(?:1[0-2]))(?:0?[1-9]|1\d|2[0-8]))(?!\d)'
        $RegexTime = '^(?:(?:([01]?\d|2[0-3]))?([0-5]?\d))?([0-5]?\d)$'
        $RegexUnc = '^\\(?:\\[^<>:`"/\\|?*]+)+$'


        # Check the connection timeout
        if ($SourceServer.ConnectionContext.StatementTimeout -ne 0) {
            $SourceServer.ConnectionContext.StatementTimeout = 0
            Write-Message -Message "Connection timeout of $SourceServer is set to 0" -Level Verbose
        }

        # Check the backup network path
        Write-Message -Message "Testing backup network path $BackupNetworkPath" -Level Verbose
        if ((Test-DbaPath -Path $BackupNetworkPath -SqlInstance $SourceSqlInstance -SqlCredential $SourceCredential) -ne $true) {
            Stop-Function -Message "Backup network path $BackupNetworkPath is not valid or can't be reached." -Target $SourceSqlInstance
            return
        } elseif ($BackupNetworkPath -notmatch $RegexUnc) {
            Stop-Function -Message "Backup network path $BackupNetworkPath has to be in the form of \\server\share." -Target $SourceSqlInstance
            return
        }

        # Check the backup compression
        if ($SourceServer.Version.Major -gt 9) {
            if ($CompressBackup) {
                Write-Message -Message "Setting backup compression to 1." -Level Verbose
                [bool]$BackupCompression = 1
            } else {
                $backupServerSetting = (Get-DbaSpConfigure -SqlInstance $SourceSqlInstance -ConfigName DefaultBackupCompression).ConfiguredValue
                Write-Message -Message "Setting backup compression to default server setting $backupServerSetting." -Level Verbose
                [bool]$BackupCompression = $backupServerSetting
            }
        } else {
            Write-Message -Message "Source server $SourceServer does not support backup compression" -Level Verbose
        }

        # Check the database parameter
        if ($Database) {
            foreach ($db in $Database) {
                if ($db -notin $SourceServer.Databases.Name) {
                    Stop-Function -Message "Database $db cannot be found on instance $SourceSqlInstance" -Target $SourceSqlInstance
                }

                $DatabaseCollection = $SourceServer.Databases | Where-Object { $_.Name -in $Database }
            }
        } else {
            Stop-Function -Message "Please supply a database to set up log shipping for" -Target $SourceSqlInstance -Continue
        }

        # Set the database mode
        if ($Standby) {
            $DatabaseStatus = 1
            Write-Message -Message "Destination database status set to STANDBY" -Level Verbose
        } else {
            $DatabaseStatus = 0
            Write-Message -Message "Destination database status set to NO RECOVERY" -Level Verbose
        }

        # Setting defaults
        if (-not $BackupRetention) {
            $BackupRetention = 4320
            Write-Message -Message "Backup retention set to $BackupRetention" -Level Verbose
        }
        if (-not $BackupThreshold) {
            $BackupThreshold = 60
            Write-Message -Message "Backup Threshold set to $BackupThreshold" -Level Verbose
        }
        if (-not $CopyRetention) {
            $CopyRetention = 4320
            Write-Message -Message "Copy retention set to $CopyRetention" -Level Verbose
        }
        if (-not $HistoryRetention) {
            $HistoryRetention = 14420
            Write-Message -Message "History retention set to $HistoryRetention" -Level Verbose
        }
        if (-not $RestoreAlertThreshold) {
            $RestoreAlertThreshold = 45
            Write-Message -Message "Restore alert Threshold set to $RestoreAlertThreshold" -Level Verbose
        }
        if (-not $RestoreDelay) {
            $RestoreDelay = 0
            Write-Message -Message "Restore delay set to $RestoreDelay" -Level Verbose
        }
        if (-not $RestoreRetention) {
            $RestoreRetention = 4320
            Write-Message -Message "Restore retention set to $RestoreRetention" -Level Verbose
        }
        if (-not $RestoreThreshold) {
            $RestoreThreshold = 0
            Write-Message -Message "Restore Threshold set to $RestoreThreshold" -Level Verbose
        }
        if (-not $PrimaryMonitorServerSecurityMode) {
            $PrimaryMonitorServerSecurityMode = 1
            Write-Message -Message "Primary monitor server security mode set to $PrimaryMonitorServerSecurityMode" -Level Verbose
        }
        if (-not $SecondaryMonitorServerSecurityMode) {
            $SecondaryMonitorServerSecurityMode = 1
            Write-Message -Message "Secondary monitor server security mode set to $SecondaryMonitorServerSecurityMode" -Level Verbose
        }
        if (-not $BackupScheduleFrequencyType) {
            $BackupScheduleFrequencyType = "Daily"
            Write-Message -Message "Backup frequency type set to $BackupScheduleFrequencyType" -Level Verbose
        }
        if (-not $BackupScheduleFrequencyInterval) {
            $BackupScheduleFrequencyInterval = "EveryDay"
            Write-Message -Message "Backup frequency interval set to $BackupScheduleFrequencyInterval" -Level Verbose
        }
        if (-not $BackupScheduleFrequencySubdayType) {
            $BackupScheduleFrequencySubdayType = "Minutes"
            Write-Message -Message "Backup frequency subday type set to $BackupScheduleFrequencySubdayType" -Level Verbose
        }
        if (-not $BackupScheduleFrequencySubdayInterval) {
            $BackupScheduleFrequencySubdayInterval = 15
            Write-Message -Message "Backup frequency subday interval set to $BackupScheduleFrequencySubdayInterval" -Level Verbose
        }
        if (-not $BackupScheduleFrequencyRelativeInterval) {
            $BackupScheduleFrequencyRelativeInterval = "Unused"
            Write-Message -Message "Backup frequency relative interval set to $BackupScheduleFrequencyRelativeInterval" -Level Verbose
        }
        if (-not $BackupScheduleFrequencyRecurrenceFactor) {
            $BackupScheduleFrequencyRecurrenceFactor = 0
            Write-Message -Message "Backup frequency recurrence factor set to $BackupScheduleFrequencyRecurrenceFactor" -Level Verbose
        }
        if (-not $CopyScheduleFrequencyType) {
            $CopyScheduleFrequencyType = "Daily"
            Write-Message -Message "Copy frequency type set to $CopyScheduleFrequencyType" -Level Verbose
        }
        if (-not $CopyScheduleFrequencyInterval) {
            $CopyScheduleFrequencyInterval = "EveryDay"
            Write-Message -Message "Copy frequency interval set to $CopyScheduleFrequencyInterval" -Level Verbose
        }
        if (-not $CopyScheduleFrequencySubdayType) {
            $CopyScheduleFrequencySubdayType = "Minutes"
            Write-Message -Message "Copy frequency subday type set to $CopyScheduleFrequencySubdayType" -Level Verbose
        }
        if (-not $CopyScheduleFrequencySubdayInterval) {
            $CopyScheduleFrequencySubdayInterval = 15
            Write-Message -Message "Copy frequency subday interval set to $CopyScheduleFrequencySubdayInterval" -Level Verbose
        }
        if (-not $CopyScheduleFrequencyRelativeInterval) {
            $CopyScheduleFrequencyRelativeInterval = "Unused"
            Write-Message -Message "Copy frequency relative interval set to $CopyScheduleFrequencyRelativeInterval" -Level Verbose
        }
        if (-not $CopyScheduleFrequencyRecurrenceFactor) {
            $CopyScheduleFrequencyRecurrenceFactor = 0
            Write-Message -Message "Copy frequency recurrence factor set to $CopyScheduleFrequencyRecurrenceFactor" -Level Verbose
        }
        if (-not $RestoreScheduleFrequencyType) {
            $RestoreScheduleFrequencyType = "Daily"
            Write-Message -Message "Restore frequency type set to $RestoreScheduleFrequencyType" -Level Verbose
        }
        if (-not $RestoreScheduleFrequencyInterval) {
            $RestoreScheduleFrequencyInterval = "EveryDay"
            Write-Message -Message "Restore frequency interval set to $RestoreScheduleFrequencyInterval" -Level Verbose
        }
        if (-not $RestoreScheduleFrequencySubdayType) {
            $RestoreScheduleFrequencySubdayType = "Minutes"
            Write-Message -Message "Restore frequency subday type set to $RestoreScheduleFrequencySubdayType" -Level Verbose
        }
        if (-not $RestoreScheduleFrequencySubdayInterval) {
            $RestoreScheduleFrequencySubdayInterval = 15
            Write-Message -Message "Restore frequency subday interval set to $RestoreScheduleFrequencySubdayInterval" -Level Verbose
        }
        if (-not $RestoreScheduleFrequencyRelativeInterval) {
            $RestoreScheduleFrequencyRelativeInterval = "Unused"
            Write-Message -Message "Restore frequency relative interval set to $RestoreScheduleFrequencyRelativeInterval" -Level Verbose
        }
        if (-not $RestoreScheduleFrequencyRecurrenceFactor) {
            $RestoreScheduleFrequencyRecurrenceFactor = 0
            Write-Message -Message "Restore frequency recurrence factor set to $RestoreScheduleFrequencyRecurrenceFactor" -Level Verbose
        }

        # Checking for contradicting variables
        if ($NoInitialization -and ($GenerateFullBackup -or $UseExistingFullBackup)) {
            Stop-Function -Message "Cannot use -NoInitialization with -GenerateFullBackup or -UseExistingFullBackup" -Target $DestinationSqlInstance
            return
        }

        if ($UseBackupFolder -and ($GenerateFullBackup -or $NoInitialization -or $UseExistingFullBackup)) {
            Stop-Function -Message "Cannot use -UseBackupFolder with -GenerateFullBackup, -NoInitialization or -UseExistingFullBackup" -Target $DestinationSqlInstance
            return
        }

        # Check the subday interval
        if (($BackupScheduleFrequencySubdayType -in 2, "Seconds", 4, "Minutes") -and (-not ($BackupScheduleFrequencySubdayInterval -ge 1 -or $BackupScheduleFrequencySubdayInterval -le 59))) {
            Stop-Function -Message "Backup subday interval $BackupScheduleFrequencySubdayInterval must be between 1 and 59 when subday type is 2, 'Seconds', 4 or 'Minutes'" -Target $SourceSqlInstance
            return
        } elseif (($BackupScheduleFrequencySubdayType -in 8, "Hours") -and (-not ($BackupScheduleFrequencySubdayInterval -ge 1 -and $BackupScheduleFrequencySubdayInterval -le 23))) {
            Stop-Function -Message "Backup Subday interval $BackupScheduleFrequencySubdayInterval must be between 1 and 23 when subday type is 8 or 'Hours" -Target $SourceSqlInstance
            return
        }

        # Check the subday interval
        if (($CopyScheduleFrequencySubdayType -in 2, "Seconds", 4, "Minutes") -and (-not ($CopyScheduleFrequencySubdayInterval -ge 1 -or $CopyScheduleFrequencySubdayInterval -le 59))) {
            Stop-Function -Message "Copy subday interval $CopyScheduleFrequencySubdayInterval must be between 1 and 59 when subday type is 2, 'Seconds', 4 or 'Minutes'" -Target $DestinationSqlInstance
            return
        } elseif (($CopyScheduleFrequencySubdayType -in 8, "Hours") -and (-not ($CopyScheduleFrequencySubdayInterval -ge 1 -and $CopyScheduleFrequencySubdayInterval -le 23))) {
            Stop-Function -Message "Copy subday interval $CopyScheduleFrequencySubdayInterval must be between 1 and 23 when subday type is 8 or 'Hours'" -Target $DestinationSqlInstance
            return
        }

        # Check the subday interval
        if (($RestoreScheduleFrequencySubdayType -in 2, "Seconds", 4, "Minutes") -and (-not ($RestoreScheduleFrequencySubdayInterval -ge 1 -or $RestoreScheduleFrequencySubdayInterval -le 59))) {
            Stop-Function -Message "Restore subday interval $RestoreScheduleFrequencySubdayInterval must be between 1 and 59 when subday type is 2, 'Seconds', 4 or 'Minutes'" -Target $DestinationSqlInstance
            return
        } elseif (($RestoreScheduleFrequencySubdayType -in 8, "Hours") -and (-not ($RestoreScheduleFrequencySubdayInterval -ge 1 -and $RestoreScheduleFrequencySubdayInterval -le 23))) {
            Stop-Function -Message "Restore subday interval $RestoreScheduleFrequencySubdayInterval must be between 1 and 23 when subday type is 8 or 'Hours" -Target $DestinationSqlInstance
            return
        }

        # Check the backup start date
        if (-not $BackupScheduleStartDate) {
            $BackupScheduleStartDate = (Get-Date -format "yyyyMMdd")
            Write-Message -Message "Backup start date set to $BackupScheduleStartDate" -Level Verbose
        } else {
            if ($BackupScheduleStartDate -notmatch $RegexDate) {
                Stop-Function -Message "Backup start date $BackupScheduleStartDate needs to be a valid date with format yyyyMMdd" -Target $SourceSqlInstance
                return
            }
        }

        # Check the back start time
        if (-not $BackupScheduleStartTime) {
            $BackupScheduleStartTime = '000000'
            Write-Message -Message "Backup start time set to $BackupScheduleStartTime" -Level Verbose
        } elseif ($BackupScheduleStartTime -notmatch $RegexTime) {
            Stop-Function -Message  "Backup start time $BackupScheduleStartTime needs to match between '000000' and '235959'" -Target $SourceSqlInstance
            return
        }

        # Check the back end time
        if (-not $BackupScheduleEndTime) {
            $BackupScheduleEndTime = '235959'
            Write-Message -Message "Backup end time set to $BackupScheduleEndTime" -Level Verbose
        } elseif ($BackupScheduleStartTime -notmatch $RegexTime) {
            Stop-Function -Message  "Backup end time $BackupScheduleStartTime needs to match between '000000' and '235959'" -Target $SourceSqlInstance
            return
        }

        # Check the backup end date
        if (-not $BackupScheduleEndDate) {
            $BackupScheduleEndDate = '99991231'
        } elseif ($BackupScheduleEndDate -notmatch $RegexDate) {
            Stop-Function -Message "Backup end date $BackupScheduleEndDate needs to be a valid date with format yyyyMMdd" -Target $SourceSqlInstance
            return
        }

        # Check the copy start date
        if (-not $CopyScheduleStartDate) {
            $CopyScheduleStartDate = (Get-Date -format "yyyyMMdd")
            Write-Message -Message "Copy start date set to $CopyScheduleStartDate" -Level Verbose
        } else {
            if ($CopyScheduleStartDate -notmatch $RegexDate) {
                Stop-Function -Message "Copy start date $CopyScheduleStartDate needs to be a valid date with format yyyyMMdd" -Target $SourceSqlInstance
                return
            }
        }

        # Check the copy end date
        if (-not $CopyScheduleEndDate) {
            $CopyScheduleEndDate = '99991231'
        } elseif ($CopyScheduleEndDate -notmatch $RegexDate) {
            Stop-Function -Message "Copy end date $CopyScheduleEndDate needs to be a valid date with format yyyyMMdd" -Target $SourceSqlInstance
            return
        }

        # Check the copy start time
        if (-not $CopyScheduleStartTime) {
            $CopyScheduleStartTime = '000000'
            Write-Message -Message "Copy start time set to $CopyScheduleStartTime" -Level Verbose
        } elseif ($CopyScheduleStartTime -notmatch $RegexTime) {
            Stop-Function -Message  "Copy start time $CopyScheduleStartTime needs to match between '000000' and '235959'" -Target $SourceSqlInstance
            return
        }

        # Check the copy end time
        if (-not $CopyScheduleEndTime) {
            $CopyScheduleEndTime = '235959'
            Write-Message -Message "Copy end time set to $CopyScheduleEndTime" -Level Verbose
        } elseif ($CopyScheduleEndTime -notmatch $RegexTime) {
            Stop-Function -Message  "Copy end time $CopyScheduleEndTime needs to match between '000000' and '235959'" -Target $SourceSqlInstance
            return
        }

        # Check the restore start date
        if (-not $RestoreScheduleStartDate) {
            $RestoreScheduleStartDate = (Get-Date -format "yyyyMMdd")
            Write-Message -Message "Restore start date set to $RestoreScheduleStartDate" -Level Verbose
        } else {
            if ($RestoreScheduleStartDate -notmatch $RegexDate) {
                Stop-Function -Message "Restore start date $RestoreScheduleStartDate needs to be a valid date with format yyyyMMdd" -Target $SourceSqlInstance
                return
            }
        }

        # Check the restore end date
        if (-not $RestoreScheduleEndDate) {
            $RestoreScheduleEndDate = '99991231'
        } elseif ($RestoreScheduleEndDate -notmatch $RegexDate) {
            Stop-Function -Message "Restore end date $RestoreScheduleEndDate needs to be a valid date with format yyyyMMdd" -Target $SourceSqlInstance
            return
        }

        # Check the restore start time
        if (-not $RestoreScheduleStartTime) {
            $RestoreScheduleStartTime = '000000'
            Write-Message -Message "Restore start time set to $RestoreScheduleStartTime" -Level Verbose
        } elseif ($RestoreScheduleStartTime -notmatch $RegexTime) {
            Stop-Function -Message  "Restore start time $RestoreScheduleStartTime needs to match between '000000' and '235959'" -Target $SourceSqlInstance
            return
        }

        # Check the restore end time
        if (-not $RestoreScheduleEndTime) {
            $RestoreScheduleEndTime = '235959'
            Write-Message -Message "Restore end time set to $RestoreScheduleEndTime" -Level Verbose
        } elseif ($RestoreScheduleEndTime -notmatch $RegexTime) {
            Stop-Function -Message  "Restore end time $RestoreScheduleEndTime needs to match between '000000' and '235959'" -Target $SourceSqlInstance
            return
        }
    }

    process {

        if (Test-FunctionInterrupt) { return }

        foreach ($destInstance in $DestinationSqlInstance) {

            $setupResult = "Success"
            $comment = ""

            # Try connecting to the instance
            try {
                $DestinationServer = Connect-SqlInstance -SqlInstance $destInstance -SqlCredential $DestinationSqlCredential
            } catch {
                Stop-Function -Message "Could not connect to Sql Server instance $destInstance" -ErrorRecord $_ -Target $destInstance
                return
            }

            $DestinationServerName, $DestinationInstanceName = $destInstance.Split("\")

            if ($null -eq $DestinationInstanceName) {
                $DestinationInstanceName = "MSSQLSERVER"
            }

            $IsDestinationLocal = $false

            # Check if it's local or remote
            if ($DestinationServerName -in ".", "localhost", $env:ServerName, "127.0.0.1") {
                $IsDestinationLocal = $true
            }

            # Check the instance names and the database settings
            if (($SourceSqlInstance -eq $destInstance) -and (-not $SecondaryDatabasePrefix -or $SecondaryDatabaseSuffix)) {
                $setupResult = "Failed"
                $comment = "The destination database is the same as the source"
                Stop-Function -Message "The destination database is the same as the source`nPlease enter a prefix or suffix using -SecondaryDatabasePrefix or -SecondaryDatabaseSuffix." -Target $SourceSqlInstance
                return
            }

            if ($DestinationServer.ConnectionContext.StatementTimeout -ne 0) {
                $DestinationServer.ConnectionContext.StatementTimeout = 0
                Write-Message -Message "Connection timeout of $DestinationServer is set to 0" -Level Verbose
            }

            # Check the copy destination
            if (-not $CopyDestinationFolder) {
                # Make a default copy destination by retrieving the backup folder and adding a directory
                $CopyDestinationFolder = "$($DestinationServer.Settings.BackupDirectory)\Logshipping"

                # Check to see if the path already exists
                Write-Message -Message "Testing copy destination path $CopyDestinationFolder" -Level Verbose
                if (Test-DbaPath -Path $CopyDestinationFolder -SqlInstance $destInstance -SqlCredential $DestinationCredential) {
                    Write-Message -Message "Copy destination $CopyDestinationFolder already exists" -Level Verbose
                } else {
                    # Check if force is being used
                    if (-not $Force) {
                        # Set up the confirm part
                        $message = "The copy destination is missing. Do you want to use the default $($CopyDestinationFolder)?"
                        $choiceYes = New-Object System.Management.Automation.Host.ChoiceDescription "&Yes", "Answer Yes."
                        $choiceNo = New-Object System.Management.Automation.Host.ChoiceDescription "&No", "Answer No."
                        $options = [System.Management.Automation.Host.ChoiceDescription[]]($choiceYes, $choiceNo)
                        $result = $host.ui.PromptForChoice($title, $message, $options, 0)

                        # Check the result from the confirm
                        switch ($result) {
                            # If yes
                            0 {
                                # Try to create the new directory
                                try {
                                    # If the destination server is remote and the credential is set
                                    if (-not $IsDestinationLocal -and $DestinationCredential) {
                                        Invoke-Command2 -ComputerName $DestinationServerName -Credential $DestinationCredential -ScriptBlock {
                                            Write-Message -Message "Creating copy destination folder $CopyDestinationFolder" -Level Verbose
                                            New-Item -Path $CopyDestinationFolder -ItemType Directory -Credential $DestinationCredential -Force:$Force | Out-Null
                                        }
                                    }
                                    # If the server is local and the credential is set
                                    elseif ($DestinationCredential) {
                                        Invoke-Command2 -Credential $DestinationCredential -ScriptBlock {
                                            Write-Message -Message "Creating copy destination folder $CopyDestinationFolder" -Level Verbose
                                            New-Item -Path $CopyDestinationFolder -ItemType Directory -Credential $DestinationCredential -Force:$Force | Out-Null
                                        }
                                    }
                                    # If the server is local and the credential is not set
                                    else {
                                        Write-Message -Message "Creating copy destination folder $CopyDestinationFolder" -Level Verbose
                                        New-Item -Path $CopyDestinationFolder -Force:$Force -ItemType Directory | Out-Null
                                    }
                                    Write-Message -Message "Copy destination $CopyDestinationFolder created." -Level Verbose
                                } catch {
                                    $setupResult = "Failed"
                                    $comment = "Something went wrong creating the copy destination folder"
                                    Stop-Function -Message "Something went wrong creating the copy destination folder $CopyDestinationFolder. `n$_" -Target $destInstance -ErrorRecord $_
                                    return
                                }
                            }
                            1 {
                                $setupResult = "Failed"
                                $comment = "Copy destination is a mandatory parameter"
                                Stop-Function -Message "Copy destination is a mandatory parameter. Please make sure the value is entered." -Target $destInstance
                                return
                            }
                        } # switch
                    } # if not force
                    else {
                        # Try to create the copy destination on the local server
                        try {
                            Write-Message -Message "Creating copy destination folder $CopyDestinationFolder" -Level Verbose
                            New-Item $CopyDestinationFolder -ItemType Directory -Credential $DestinationCredential -Force:$Force | Out-Null
                            Write-Message -Message "Copy destination $CopyDestinationFolder created." -Level Verbose
                        } catch {
                            $setupResult = "Failed"
                            $comment = "Something went wrong creating the copy destination folder"
                            Stop-Function -Message "Something went wrong creating the copy destination folder $CopyDestinationFolder. `n$_" -Target $destInstance -ErrorRecord $_
                            return
                        }
                    } # else not force
                } # if test path copy destination
            } # if not copy destination

            Write-Message -Message "Testing copy destination path $CopyDestinationFolder" -Level Verbose
            if ((Test-DbaPath -Path $CopyDestinationFolder -SqlInstance $destInstance -SqlCredential $DestinationCredential) -ne $true) {
                $setupResult = "Failed"
                $comment = "Copy destination folder $CopyDestinationFolder is not valid or can't be reached"
                Stop-Function -Message "Copy destination folder $CopyDestinationFolder is not valid or can't be reached." -Target $destInstance
                return
            } elseif ($CopyDestinationFolder.StartsWith("\\") -and $CopyDestinationFolder -notmatch $RegexUnc) {
                $setupResult = "Failed"
                $comment = "Copy destination folder $CopyDestinationFolder has to be in the form of \\server\share"
                Stop-Function -Message "Copy destination folder $CopyDestinationFolder has to be in the form of \\server\share." -Target $destInstance
                return
            }

            if (-not ($SecondaryDatabasePrefix -or $SecondaryDatabaseSuffix) -and ($SourceServer.Name -eq $DestinationServer.Name) -and ($SourceServer.InstanceName -eq $DestinationServer.InstanceName)) {
                if ($Force) {
                    $SecondaryDatabaseSuffix = "_LS"
                } else {
                    $setupResult = "Failed"
                    $comment = "Destination database is the same as source database"
                    Stop-Function -Message "Destination database is the same as source database.`nPlease check the secondary server, database prefix or suffix or use -Force to set the secondary database using a suffix." -Target $SourceSqlInstance
                    return
                }
            }

            # Check if standby is being used
            if ($Standby) {
                # Check the stand-by directory
                if ($StandbyDirectory) {
                    # Check if the path is reachable for the destination server
                    if ((Test-DbaPath -Path $StandbyDirectory -SqlInstance $destInstance -SqlCredential $DestinationCredential) -ne $true) {
                        $setupResult = "Failed"
                        $comment = "The directory $StandbyDirectory cannot be reached by the destination instance"
                        Stop-Function -Message "The directory $StandbyDirectory cannot be reached by the destination instance. Please check the permission and credentials." -Target $destInstance
                        return
                    }
                } elseif (-not $StandbyDirectory -and $Force) {
                    $StandbyDirectory = $destInstance.BackupDirectory
                    Write-Message -Message "Stand-by directory was not set. Setting it to $StandbyDirectory" -Level Verbose
                } else {
                    $setupResult = "Failed"
                    $comment = "Please set the parameter -StandbyDirectory when using -Standby"
                    Stop-Function -Message "Please set the parameter -StandbyDirectory when using -Standby" -Target $SourceSqlInstance
                    return
                }
            }

            # Loop through each of the databases
            foreach ($db in $DatabaseCollection) {

                # Check the status of the database
                if ($db.RecoveryModel -ne 'Full') {
                    $setupResult = "Failed"
                    $comment = "Database $db is not in FULL recovery mode"

                    Stop-Function -Message  "Database $db is not in FULL recovery mode" -Target $SourceSqlInstance -Continue
                }

                # Set the intital destination database
                $SecondaryDatabase = $db.Name

                # Set the database prefix
                if ($SecondaryDatabasePrefix) {
                    $SecondaryDatabase = "$SecondaryDatabasePrefix$($db.Name)"
                }

                # Set the database suffix
                if ($SecondaryDatabaseSuffix) {
                    $SecondaryDatabase += $SecondaryDatabaseSuffix
                }

                # Check is the database is already initialized a check if the database exists on the secondary instance
                if ($NoInitialization -and ($DestinationServer.Databases.Name -notcontains $SecondaryDatabase)) {
                    $setupResult = "Failed"
                    $comment = "Database $SecondaryDatabase needs to be initialized before log shipping setting can continue"

                    Stop-Function -Message "Database $SecondaryDatabase needs to be initialized before log shipping setting can continue." -Target $SourceSqlInstance -Continue
                }

                # Check the local backup path
                if ($BackupLocalPath) {
                    if ($BackupLocalPath.EndsWith("\")) {
                        $DatabaseBackupLocalPath = "$BackupLocalPath$($db.Name)"
                    } else {
                        $DatabaseBackupLocalPath = "$BackupLocalPath\$($db.Name)"
                    }
                } else {
                    $BackupLocalPath = $BackupNetworkPath

                    if ($BackupLocalPath.EndsWith("\")) {
                        $DatabaseBackupLocalPath = "$BackupLocalPath$($db.Name)"
                    } else {
                        $DatabaseBackupLocalPath = "$BackupLocalPath\$($db.Name)"
                    }
                }
                Write-Message -Message "Backup local path set to $DatabaseBackupLocalPath." -Level Verbose

                # Setting the backup network path for the database
                if ($BackupNetworkPath.EndsWith("\")) {
                    $DatabaseBackupNetworkPath = "$BackupNetworkPath$($db.Name)"
                } else {
                    $DatabaseBackupNetworkPath = "$BackupNetworkPath\$($db.Name)"
                }
                Write-Message -Message "Backup network path set to $DatabaseBackupNetworkPath." -Level Verbose


                # Checking if the database network path exists
                if ($setupResult -ne 'Failed') {
                    Write-Message -Message "Testing database backup network path $DatabaseBackupNetworkPath" -Level Verbose
                    if ((Test-DbaPath -Path $DatabaseBackupNetworkPath -SqlInstance $SourceSqlInstance -SqlCredential $SourceCredential) -ne $true) {
                        # To to create the backup directory for the database
                        try {
                            Write-Message -Message "Database backup network path $DatabaseBackupNetworkPath not found. Trying to create it.." -Level Verbose

                            Invoke-Command2 -Credential $SourceCredential -ScriptBlock {
                                Write-Message -Message "Creating backup folder $DatabaseBackupNetworkPath" -Level Verbose
                                $null = New-Item -Path $DatabaseBackupNetworkPath -ItemType Directory -Credential $SourceCredential -Force:$Force
                            }
                        } catch {
                            $setupResult = "Failed"
                            $comment = "Something went wrong creating the backup directory"

                            Stop-Function -Message "Something went wrong creating the backup directory" -ErrorRecord $_ -Target $SourceSqlInstance -Continue
                        }
                    }
                }

                # Check if the backup job name is set
                if ($BackupJob) {
                    $DatabaseBackupJob = "$BackupJob_$($db.Name)"
                } else {
                    $DatabaseBackupJob = "LSBackup_$($db.Name)"
                }
                Write-Message -Message "Backup job name set to $DatabaseBackupJob" -Level Verbose

                # Check if the backup job schedule name is set
                if ($BackupSchedule) {
                    $DatabaseBackupSchedule = "$BackupSchedule_$($db.Name)"
                } else {
                    $DatabaseBackupSchedule = "LSBackupSchedule_$($db.Name)"
                }
                Write-Message -Message "Backup job schedule name set to $DatabaseBackupSchedule" -Level Verbose

                # Check if secondary database is present on secondary instance
                if (-not $Force -and -not $NoInitialization -and ($DestinationServer.Databases[$SecondaryDatabase].Status -ne 'Restoring') -and ($DestinationServer.Databases.Name -contains $SecondaryDatabase)) {
                    $setupResult = "Failed"
                    $comment = "Secondary database already exists on instance"

                    Stop-Function -Message "Secondary database already exists on instance $destInstance." -ErrorRecord $_ -Target $destInstance -Continue
                }

                # Check if the secondary database needs tobe initialized
                if ($setupResult -ne 'Failed') {
                    if (-not $NoInitialization) {
                        # Check if the secondary database exists on the secondary instance
                        if ($DestiationServer.Databases.Name -notcontains $SecondaryDatabase) {
                            # Check if force is being used and no option to generate the full backup is set
                            if ($Force -and -not ($GenerateFullBackup -or $UseExistingFullBackup)) {
                                # Set the option to generate a full backup
                                Write-Message -Message "Set option to initialize secondary database with full backup" -Level Verbose
                                $GenerateFullBackup = $true
                            } elseif (-not $Force -and -not $GenerateFullBackup -and -not $UseExistingFullBackup -and -not $UseBackupFolder) {
                                # Set up the confirm part
                                $message = "The database $SecondaryDatabase does not exist on instance $destInstance. `nDo you want to initialize it by generating a full backup?"
                                $choiceYes = New-Object System.Management.Automation.Host.ChoiceDescription "&Yes", "Answer Yes."
                                $choiceNo = New-Object System.Management.Automation.Host.ChoiceDescription "&No", "Answer No."
                                $options = [System.Management.Automation.Host.ChoiceDescription[]]($choiceYes, $choiceNo)
                                $result = $host.ui.PromptForChoice($title, $message, $options, 0)

                                # Check the result from the confirm
                                switch ($result) {
                                    # If yes
                                    0 {
                                        # Set the option to generate a full backup
                                        Write-Message -Message "Set option to initialize secondary database with full backup." -Level Verbose
                                        $GenerateFullBackup = $true
                                    }
                                    1 {
                                        $setupResult = "Failed"
                                        $comment = "The database is not initialized on the secondary instance"

                                        Stop-Function -Message "The database is not initialized on the secondary instance. `nPlease initialize the database on the secondary instance, use -GenerateFullbackup or use -Force." -Target $destInstance
                                        return
                                    }
                                } # switch
                            }
                        }
                    }
                }


                # Check the parameters for initialization of the secondary database
                if (-not $NoInitialization -and ($GenerateFullBackup -or $UseExistingFullBackup -or $UseBackupFolder)) {
                    # Check if the restore data and log folder are set
                    if ($setupResult -ne 'Failed') {
                        if (-not $RestoreDataFolder -or -not $RestoreLogFolder) {
                            Write-Message -Message "Restore data folder or restore log folder are not set. Using server defaults" -Level Verbose

                            # Get the default data folder
                            if (-not $RestoreDataFolder) {
                                $DatabaseRestoreDataFolder = $DestinationServer.DefaultFile
                            } else {
                                # Set the restore data folder
                                if ($RestoreDataFolder.EndsWith("\")) {
                                    $DatabaseRestoreDataFolder = "$RestoreDataFolder$($db.Name)"
                                } else {
                                    $DatabaseRestoreDataFolder = "$RestoreDataFolder\$($db.Name)"
                                }
                            }

                            Write-Message -Message "Restore data folder set to $DatabaseRestoreDataFolder" -Level Verbose

                            # Get the default log folder
                            if (-not $RestoreLogFolder) {
                                $DatabaseRestoreLogFolder = $DestinationServer.DefaultLog
                            }

                            Write-Message -Message "Restore log folder set to $DatabaseRestoreLogFolder" -Level Verbose

                            # Check if the restore data folder exists
                            Write-Message -Message "Testing database restore data path $DatabaseRestoreDataFolder" -Level Verbose
                            if ((Test-DbaPath  -Path $DatabaseRestoreDataFolder -SqlInstance $destInstance -SqlCredential $DestinationCredential) -ne $true) {
                                if ($PSCmdlet.ShouldProcess($DestinationServerName, "Creating database restore data folder $DatabaseRestoreDataFolder on $DestinationServerName")) {
                                    # Try creating the data folder
                                    try {
                                        Invoke-Command2 -Credential $DestinationCredential -ScriptBlock {
                                            Write-Message -Message "Creating data folder $DatabaseRestoreDataFolder" -Level Verbose
                                            $null = New-Item -Path $DatabaseRestoreDataFolder -ItemType Directory -Credential $DestinationCredential -Force:$Force
                                        }
                                    } catch {
                                        $setupResult = "Failed"
                                        $comment = "Something went wrong creating the restore data directory"
                                        Stop-Function -Message "Something went wrong creating the restore data directory" -ErrorRecord $_ -Target $SourceSqlInstance -Continue
                                    }
                                }
                            }

                            # Check if the restore log folder exists
                            Write-Message -Message "Testing database restore log path $DatabaseRestoreLogFolder" -Level Verbose
                            if ((Test-DbaPath  -Path $DatabaseRestoreLogFolder -SqlInstance $destInstance -SqlCredential $DestinationCredential) -ne $true) {
                                if ($PSCmdlet.ShouldProcess($DestinationServerName, "Creating database restore log folder $DatabaseRestoreLogFolder on $DestinationServerName")) {
                                    # Try creating the log folder
                                    try {
                                        Write-Message -Message "Restore log folder $DatabaseRestoreLogFolder not found. Trying to create it.." -Level Verbose

                                        Invoke-Command2 -Credential $DestinationCredential -ScriptBlock {
                                            Write-Message -Message "Restore log folder $DatabaseRestoreLogFolder not found. Trying to create it.." -Level Verbose
                                            $null = New-Item -Path $DatabaseRestoreLogFolder -ItemType Directory -Credential $DestinationCredential -Force:$Force
                                        }
                                    } catch {
                                        $setupResult = "Failed"
                                        $comment = "Something went wrong creating the restore log directory"
                                        Stop-Function -Message "Something went wrong creating the restore log directory" -ErrorRecord $_ -Target $SourceSqlInstance -Continue
                                    }
                                }
                            }
                        }
                    }

                    # Check if the full backup path can be reached
                    if ($setupResult -ne 'Failed') {
                        if ($FullBackupPath) {
                            Write-Message -Message "Testing full backup path $FullBackupPath" -Level Verbose
                            if ((Test-DbaPath -Path $FullBackupPath -SqlInstance $destInstance -SqlCredential $DestinationCredential) -ne $true) {
                                $setupResult = "Failed"
                                $comment = "The path to the full backup could not be reached"
                                Stop-Function -Message ("The path to the full backup could not be reached. Check the path and/or the crdential") -ErrorRecord $_ -Target $destInstance -Continue
                            }
                        } elseif ($UseBackupFolder.Length -ge 1) {
                            Write-Message -Message "Testing backup folder $UseBackupFolder" -Level Verbose
                            if ((Test-DbaPath -Path $UseBackupFolder -SqlInstance $destInstance -SqlCredential $DestinationCredential) -ne $true) {
                                $setupResult = "Failed"
                                $comment = "The path to the backup folder could not be reached"
                                Stop-Function -Message ("The path to the backup folder could not be reached. Check the path and/or the crdential") -ErrorRecord $_ -Target $destInstance -Continue
                            }

                            $BackupPath = $UseBackupFolder
                        } elseif ($UseExistingFullBackup) {
                            Write-Message -Message "No path to the full backup is set. Trying to retrieve the last full backup for $db from $SourceSqlInstance" -Level Verbose

                            # Get the last full backup
                            $LastBackup = Get-DbaBackupHistory -SqlInstance $SourceSqlInstance -Databases $($db.Name) -LastFull -Credential $SourceSqlCredential

                            # Check if there was a last backup
                            if ($null -eq $LastBackup) {
                                # Test the path to the backup
                                Write-Message -Message "Testing last backup path $(($LastBackup[-1]).Path[-1])" -Level Verbose
                                if ((Test-DbaPath -Path ($LastBackup[-1]).Path[-1] -SqlInstance $SourceSqlInstance -SqlCredential $SourceCredential) -ne $true) {
                                    $setupResult = "Failed"
                                    $comment = "The full backup could not be found"
                                    Stop-Function -Message "The full backup could not be found on $($LastBackup.Path). Check path and/or credentials" -ErrorRecord $_ -Target $destInstance -Continue
                                }
                                # Check if the source for the last full backup is remote and the backup is on a shared location
                                elseif (($LastBackup.Computername -ne $SourceServerName) -and (($LastBackup[-1]).Path[-1].StartsWith('\\') -eq $false)) {
                                    $setupResult = "Failed"
                                    $comment = "The last full backup is not located on shared location"
                                    Stop-Function -Message "The last full backup is not located on shared location. `n$($_.Exception.Message)" -ErrorRecord $_ -Target $destInstance -Continue
                                } else {
                                    #$FullBackupPath = $LastBackup.Path
                                    $BackupPath = $LastBackup.Path
                                    Write-Message -Message "Full backup found for $db. Path $BackupPath" -Level Verbose
                                }
                            } else {
                                Write-Message -Message "No Full backup found for $db." -Level Verbose
                            }
                        }
                    }
                }

                # Set the copy destination folder to include the database name
                if ($CopyDestinationFolder.EndsWith("\")) {
                    $DatabaseCopyDestinationFolder = "$CopyDestinationFolder$($db.Name)"
                } else {
                    $DatabaseCopyDestinationFolder = "$CopyDestinationFolder\$($db.Name)"
                }
                Write-Message -Message "Copy destination folder set to $DatabaseCopyDestinationFolder." -Level Verbose

                # Check if the copy job name is set
                if ($CopyJob) {
                    $DatabaseCopyJob = "$CopyJob_$SourceServerName_$($db.Name)"
                } else {
                    $DatabaseCopyJob = "LSCopy_$SourceServerName_$($db.Name)"
                }
                Write-Message -Message "Copy job name set to $DatabaseCopyJob" -Level Verbose

                # Check if the copy job schedule name is set
                if ($CopySchedule) {
                    $DatabaseCopySchedule = "$CopySchedule_$($db.Name)"
                } else {
                    $DatabaseCopySchedule = "LSCopySchedule_$($db.Name)"
                    Write-Message -Message "Copy job schedule name set to $DatabaseCopySchedule" -Level Verbose
                }

                # Check if the copy destination folder exists
                if ($setupResult -ne 'Failed') {
                    Write-Message -Message "Testing database copy destination path $DatabaseCopyDestinationFolder" -Level Verbose
                    if ((Test-DbaPath -Path $DatabaseCopyDestinationFolder -SqlInstance $destInstance -SqlCredential $DestinationCredential) -ne $true) {
                        if ($PSCmdlet.ShouldProcess($DestinationServerName, "Creating copy destination folder on $DestinationServerName")) {
                            try {
                                Invoke-Command2 -Credential $DestinationCredential -ScriptBlock {
                                    Write-Message -Message "Copy destination folder $DatabaseCopyDestinationFolder not found. Trying to create it.. ." -Level Verbose
                                    $null = New-Item -Path $DatabaseCopyDestinationFolder -ItemType Directory -Credential $DestinationCredential -Force:$Force
                                }
                            } catch {
                                $setupResult = "Failed"
                                $comment = "Something went wrong creating the database copy destination folder"
                                Stop-Function -Message "Something went wrong creating the database copy destination folder. `n$($_.Exception.Message)" -ErrorRecord $_ -Target $DestinationServerName -Continue
                            }
                        }
                    }
                }

                # Check if the restore job name is set
                if ($RestoreJob) {
                    $DatabaseRestoreJob = "$RestoreJob_$SourceServerName_$($db.Name)"
                } else {
                    $DatabaseRestoreJob = "LSRestore_$DestinationServerName_$($db.Name)"
                }
                Write-Message -Message "Restore job name set to $DatabaseRestoreJob" -Level Verbose

                # Check if the restore job schedule name is set
                if ($RestoreSchedule) {
                    $DatabaseRestoreSchedule = "$RestoreSchedule_$($db.Name)"
                } else {
                    $DatabaseRestoreSchedule = "LSRestoreSchedule_$($db.Name)"
                }
                Write-Message -Message "Restore job schedule name set to $DatabaseRestoreSchedule" -Level Verbose

                # If the database needs to be backed up first
                if ($setupResult -ne 'Failed') {
                    if ($GenerateFullBackup) {
                        if ($PSCmdlet.ShouldProcess($SourceSqlInstance, "Backing up database $db")) {

                            Write-Message -Message "Generating full backup." -Level Verbose
                            Write-Message -Message "Backing up database $db to $DatabaseBackupNetworkPath" -Level Verbose

                            try {
                                $Timestamp = Get-Date -format "yyyyMMddHHmmss"

                                $LastBackup = Backup-DbaDatabase -SqlInstance $SourceSqlInstance `
                                    -SqlCredential $SourceSqlCredential `
                                    -BackupDirectory $DatabaseBackupNetworkPath `
                                    -BackupFileName "FullBackup_$($db.Name)_PreLogShipping_$Timestamp.bak" `
                                    -Databases $($db.Name) `
                                    -Type Full

                                Write-Message -Message "Backup completed." -Level Verbose

                                # Get the last full backup path
                                #$FullBackupPath = $LastBackup.BackupPath
                                $BackupPath = $LastBackup.BackupPath

                                Write-Message -Message "Backup is located at $BackupPath" -Level Verbose
                            } catch {
                                $setupResult = "Failed"
                                $comment = "Something went wrong generating the full backup"
                                Stop-Function -Message "Something went wrong generating the full backup" -ErrorRecord $_ -Target $DestinationServerName -Continue
                            }
                        }
                    }
                }

                # Check of the MonitorServerSecurityMode value is of type string and set the integer value
                if ($PrimaryMonitorServerSecurityMode -notin 0, 1) {
                    $PrimaryMonitorServerSecurityMode = switch ($PrimaryMonitorServerSecurityMode) {
                        "SQLSERVER" { 0 } "WINDOWS" { 1 } default { 1 }
                    }
                }

                # Check the primary monitor server
                if ($Force -and (-not$PrimaryMonitorServer -or [string]$PrimaryMonitorServer -eq '' -or $null -eq $PrimaryMonitorServer)) {
                    Write-Message -Message "Setting monitor server for primary server to $SourceSqlInstance." -Level Verbose
                    $PrimaryMonitorServer = $SourceSqlInstance
                }

                # Check the PrimaryMonitorServerSecurityMode if it's SQL Server authentication
                if ($PrimaryMonitorServerSecurityMode -eq 0) {
                    if ($PrimaryMonitorServerLogin) {
                        $setupResult = "Failed"
                        $comment = "The PrimaryMonitorServerLogin cannot be empty"
                        Stop-Function -Message "The PrimaryMonitorServerLogin cannot be empty when using SQL Server authentication." -Target $SourceSqlInstance -Continue
                    }

                    if ($PrimaryMonitorServerPassword) {
                        $setupResult = "Failed"
                        $comment = "The PrimaryMonitorServerPassword cannot be empty"
                        Stop-Function -Message "The PrimaryMonitorServerPassword cannot be empty when using SQL Server authentication." -Target $ -Continue
                    }
                }

                # Check of the SecondaryMonitorServerSecurityMode value is of type string and set the integer value
                if ($SecondaryMonitorServerSecurityMode -notin 0, 1) {
                    $SecondaryMonitorServerSecurityMode = switch ($SecondaryMonitorServerSecurityMode) {
                        "SQLSERVER" { 0 } "WINDOWS" { 1 } default { 1 }
                    }
                }

                # Check the secondary monitor server
                if ($Force -and (-not $SecondaryMonitorServer -or [string]$SecondaryMonitorServer -eq '' -or $null -eq $SecondaryMonitorServer)) {
                    Write-Message -Message "Setting secondary monitor server for $destInstance to $SourceSqlInstance." -Level Verbose
                    $SecondaryMonitorServer = $SourceSqlInstance
                }

                # Check the MonitorServerSecurityMode if it's SQL Server authentication
                if ($SecondaryMonitorServerSecurityMode -eq 0) {
                    if ($SecondaryMonitorServerLogin) {
                        $setupResult = "Failed"
                        $comment = "The SecondaryMonitorServerLogin cannot be empty"
                        Stop-Function -Message "The SecondaryMonitorServerLogin cannot be empty when using SQL Server authentication." -Target $SourceSqlInstance -Continue
                    }

                    if ($SecondaryMonitorServerPassword) {
                        $setupResult = "Failed"
                        $comment = "The SecondaryMonitorServerPassword cannot be empty"
                        Stop-Function -Message "The SecondaryMonitorServerPassword cannot be empty when using SQL Server authentication." -Target $SourceSqlInstance -Continue
                    }
                }

                # Now that all the checks have been done we can start with the fun stuff !

                # Restore the full backup
                if ($setupResult -ne 'Failed') {
                    if ($PSCmdlet.ShouldProcess($destInstance, "Restoring database $db to $SecondaryDatabase on $destInstance")) {
                        if ($GenerateFullBackup -or $UseExistingFullBackup -or $UseBackupFolder) {
                            try {
                                Write-Message -Message "Start database restore" -Level Verbose
                                if ($NoRecovery -or (-not $Standby)) {
                                    if ($Force) {
                                        $null = Restore-DbaDatabase -SqlInstance $destInstance `
                                            -SqlCredential $DestinationSqlCredential `
                                            -Path $BackupPath `
                                            -DestinationFilePrefix $SecondaryDatabasePrefix `
                                            -DestinationFileSuffix $SecondaryDatabaseSuffix `
                                            -DestinationDataDirectory $DatabaseRestoreDataFolder `
                                            -DestinationLogDirectory $DatabaseRestoreLogFolder `
                                            -DatabaseName $SecondaryDatabase `
                                            -DirectoryRecurse `
                                            -NoRecovery `
                                            -WithReplace
                                    } else {
                                        $null = Restore-DbaDatabase -SqlInstance $destInstance `
                                            -SqlCredential $DestinationSqlCredential `
                                            -Path $BackupPath `
                                            -DestinationFilePrefix $SecondaryDatabasePrefix `
                                            -DestinationFileSuffix $SecondaryDatabaseSuffix `
                                            -DestinationDataDirectory $DatabaseRestoreDataFolder `
                                            -DestinationLogDirectory $DatabaseRestoreLogFolder `
                                            -DatabaseName $SecondaryDatabase `
                                            -DirectoryRecurse `
                                            -NoRecovery
                                    }
                                }

                                # If the database needs to be in standby
                                if ($Standby) {
                                    # Setup the path to the standby file
                                    $StandbyDirectory = "$DatabaseCopyDestinationFolder"

                                    # Check if credentials need to be used
                                    if ($DestinationSqlCredential) {
                                        $null = Restore-DbaDatabase -SqlInstance $destInstance `
                                            -SqlCredential $DestinationSqlCredential `
                                            -Path $BackupPath `
                                            -DestinationFilePrefix $SecondaryDatabasePrefix `
                                            -DestinationFileSuffix $SecondaryDatabaseSuffix `
                                            -DestinationDataDirectory $DatabaseRestoreDataFolder `
                                            -DestinationLogDirectory $DatabaseRestoreLogFolder `
                                            -DatabaseName $SecondaryDatabase `
                                            -DirectoryRecurse `
                                            -StandbyDirectory $StandbyDirectory
                                    } else {
                                        $null = Restore-DbaDatabase -SqlInstance $destInstance `
                                            -Path $BackupPath `
                                            -DestinationFilePrefix $SecondaryDatabasePrefix `
                                            -DestinationFileSuffix $SecondaryDatabaseSuffix `
                                            -DestinationDataDirectory $DatabaseRestoreDataFolder `
                                            -DestinationLogDirectory $DatabaseRestoreLogFolder `
                                            -DatabaseName $SecondaryDatabase `
                                            -DirectoryRecurse `
                                            -StandbyDirectory $StandbyDirectory
                                    }
                                }
                            } catch {
                                $setupResult = "Failed"
                                $comment = "Something went wrong restoring the secondary database"
                                Stop-Function -Message "Something went wrong restoring the secondary database" -ErrorRecord $_ -Target $SourceSqlInstance -Continue
                            }

                            Write-Message -Message "Restore completed." -Level Verbose
                        }
                    }
                }

                #region Set up log shipping on the primary instance
                # Set up log shipping on the primary instance
                if ($setupResult -ne 'Failed') {
                    if ($PSCmdlet.ShouldProcess($SourceSqlInstance, "Configuring logshipping for primary database $db on $SourceSqlInstance")) {
                        try {

                            Write-Message -Message "Configuring logshipping for primary database" -Level Verbose

                            New-DbaLogShippingPrimaryDatabase -SqlInstance $SourceSqlInstance `
                                -SqlCredential $SourceSqlCredential `
                                -Database $($db.Name) `
                                -BackupDirectory $DatabaseBackupLocalPath `
                                -BackupJob $DatabaseBackupJob `
                                -BackupRetention $BackupRetention `
                                -BackupShare $DatabaseBackupNetworkPath `
                                -BackupThreshold $BackupThreshold `
                                -CompressBackup:$BackupCompression `
                                -HistoryRetention $HistoryRetention `
                                -MonitorServer $PrimaryMonitorServer `
                                -MonitorServerSecurityMode $PrimaryMonitorServerSecurityMode `
                                -MonitorCredential $PrimaryMonitorCredential `
                                -ThresholdAlertEnabled:$PrimaryThresholdAlertEnabled `
                                -Force:$Force

                            # Check if the backup job needs to be enabled or disabled
                            if ($BackupScheduleDisabled) {
                                $null = Set-DbaAgentJob -SqlInstance $SourceSqlInstance -SqlCredential $SourceSqlCredential -Job $DatabaseBackupJob -Disabled
                                Write-Message -Message "Disabling backup job $DatabaseBackupJob" -Level Verbose
                            } else {
                                $null = Set-DbaAgentJob -SqlInstance $SourceSqlInstance -SqlCredential $SourceSqlCredential -Job $DatabaseBackupJob -Enabled
                                Write-Message -Message "Enabling backup job $DatabaseBackupJob" -Level Verbose
                            }

                            Write-Message -Message "Create backup job schedule $DatabaseBackupSchedule" -Level Verbose

                            #Variable $BackupJobSchedule marked as unused by PSScriptAnalyzer replaced with $null for catching output
                            $null = New-DbaAgentSchedule -SqlInstance $SourceSqlInstance `
                                -SqlCredential $SourceSqlCredential `
                                -Job $DatabaseBackupJob `
                                -Schedule $DatabaseBackupSchedule `
                                -FrequencyType $BackupScheduleFrequencyType `
                                -FrequencyInterval $BackupScheduleFrequencyInterval `
                                -FrequencySubdayType $BackupScheduleFrequencySubdayType `
                                -FrequencySubdayInterval $BackupScheduleFrequencySubdayInterval `
                                -FrequencyRelativeInterval $BackupScheduleFrequencyRelativeInterval `
                                -FrequencyRecurrenceFactor $BackupScheduleFrequencyRecurrenceFactor `
                                -StartDate $BackupScheduleStartDate `
                                -EndDate $BackupScheduleEndDate `
                                -StartTime $BackupScheduleStartTime `
                                -EndTime $BackupScheduleEndTime `
                                -Force:$Force

                            Write-Message -Message "Configuring logshipping from primary to secondary database." -Level Verbose

                            New-DbaLogShippingPrimarySecondary -SqlInstance $SourceSqlInstance `
                                -SqlCredential $SourceSqlCredential `
                                -PrimaryDatabase $($db.Name) `
                                -SecondaryDatabase $SecondaryDatabase `
                                -SecondaryServer $destInstance `
                                -SecondarySqlCredential $DestinationSqlCredential
                        } catch {
                            $setupResult = "Failed"
                            $comment = "Something went wrong setting up log shipping for primary instance"
                            Stop-Function -Message "Something went wrong setting up log shipping for primary instance" -ErrorRecord $_ -Target $SourceSqlInstance -Continue
                        }
                    }
                }
                #endregion Set up log shipping on the primary instance

                #region Set up log shipping on the secondary instance
                # Set up log shipping on the secondary instance
                if ($setupResult -ne 'Failed') {
                    if ($PSCmdlet.ShouldProcess($destInstance, "Configuring logshipping for secondary database $SecondaryDatabase on $destInstance")) {
                        try {

                            Write-Message -Message "Configuring logshipping from secondary database $SecondaryDatabase to primary database $db." -Level Verbose

                            New-DbaLogShippingSecondaryPrimary -SqlInstance $destInstance `
                                -SqlCredential $DestinationSqlCredential `
                                -BackupSourceDirectory $DatabaseBackupNetworkPath `
                                -BackupDestinationDirectory $DatabaseCopyDestinationFolder `
                                -CopyJob $DatabaseCopyJob `
                                -FileRetentionPeriod $BackupRetention `
                                -MonitorServer $SecondaryMonitorServer `
                                -MonitorServerSecurityMode $SecondaryMonitorServerSecurityMode `
                                -MonitorCredential $SecondaryMonitorCredential `
                                -PrimaryServer $SourceSqlInstance `
                                -PrimaryDatabase $($db.Name) `
                                -RestoreJob $DatabaseRestoreJob `
                                -Force:$Force

                            Write-Message -Message "Create copy job schedule $DatabaseCopySchedule" -Level Verbose
                            #Variable $CopyJobSchedule marked as unused by PSScriptAnalyzer replaced with $null for catching output
                            $null = New-DbaAgentSchedule -SqlInstance $destInstance `
                                -SqlCredential $DestinationSqlCredential `
                                -Job $DatabaseCopyJob `
                                -Schedule $DatabaseCopySchedule `
                                -FrequencyType $CopyScheduleFrequencyType `
                                -FrequencyInterval $CopyScheduleFrequencyInterval `
                                -FrequencySubdayType $CopyScheduleFrequencySubdayType `
                                -FrequencySubdayInterval $CopyScheduleFrequencySubdayInterval `
                                -FrequencyRelativeInterval $CopyScheduleFrequencyRelativeInterval `
                                -FrequencyRecurrenceFactor $CopyScheduleFrequencyRecurrenceFactor `
                                -StartDate $CopyScheduleStartDate `
                                -EndDate $CopyScheduleEndDate `
                                -StartTime $CopyScheduleStartTime `
                                -EndTime $CopyScheduleEndTime `
                                -Force:$Force

                            Write-Message -Message "Create restore job schedule $DatabaseRestoreSchedule" -Level Verbose

                            #Variable $RestoreJobSchedule marked as unused by PSScriptAnalyzer replaced with $null for catching output
                            $null = New-DbaAgentSchedule -SqlInstance $destInstance `
                                -SqlCredential $DestinationSqlCredential `
                                -Job $DatabaseRestoreJob `
                                -Schedule $DatabaseRestoreSchedule `
                                -FrequencyType $RestoreScheduleFrequencyType `
                                -FrequencyInterval $RestoreScheduleFrequencyInterval `
                                -FrequencySubdayType $RestoreScheduleFrequencySubdayType `
                                -FrequencySubdayInterval $RestoreScheduleFrequencySubdayInterval `
                                -FrequencyRelativeInterval $RestoreScheduleFrequencyRelativeInterval `
                                -FrequencyRecurrenceFactor $RestoreScheduleFrequencyRecurrenceFactor `
                                -StartDate $RestoreScheduleStartDate `
                                -EndDate $RestoreScheduleEndDate `
                                -StartTime $RestoreScheduleStartTime `
                                -EndTime $RestoreScheduleEndTime `
                                -Force:$Force

                            Write-Message -Message "Configuring logshipping for secondary database." -Level Verbose

                            New-DbaLogShippingSecondaryDatabase -SqlInstance $destInstance `
                                -SqlCredential $DestinationSqlCredential `
                                -SecondaryDatabase $SecondaryDatabase `
                                -PrimaryServer $SourceSqlInstance `
                                -PrimaryDatabase $($db.Name) `
                                -RestoreDelay $RestoreDelay `
                                -RestoreMode $DatabaseStatus `
                                -DisconnectUsers:$DisconnectUsers `
                                -RestoreThreshold $RestoreThreshold `
                                -ThresholdAlertEnabled:$SecondaryThresholdAlertEnabled `
                                -HistoryRetention $HistoryRetention

                            # Check if the copy job needs to be enabled or disabled
                            if ($CopyScheduleDisabled) {
                                $null = Set-DbaAgentJob -SqlInstance $destInstance -SqlCredential $DestinationSqlCredential -Job $DatabaseCopyJob -Disabled
                            } else {
                                $null = Set-DbaAgentJob -SqlInstance $destInstance -SqlCredential $DestinationSqlCredential -Job $DatabaseCopyJob -Enabled
                            }

                            # Check if the restore job needs to be enabled or disabled
                            if ($RestoreScheduleDisabled) {
                                $null = Set-DbaAgentJob -SqlInstance $destInstance -SqlCredential $DestinationSqlCredential -Job $DatabaseRestoreJob -Disabled
                            } else {
                                $null = Set-DbaAgentJob -SqlInstance $destInstance -SqlCredential $DestinationSqlCredential -Job $DatabaseRestoreJob -Enabled
                            }

                        } catch {
                            $setupResult = "Failed"
                            $comment = "Something went wrong setting up log shipping for secondary instance"
                            Stop-Function -Message "Something went wrong setting up log shipping for secondary instance.`n$($_.Exception.Message)" -ErrorRecord $_ -Target $destInstance -Continue
                        }
                    }
                }
                #endregion Set up log shipping on the secondary instance

                Write-Message -Message "Completed configuring log shipping for database $db" -Level Verbose

                [PSCustomObject]@{
                    PrimaryInstance   = $SourceServer.DomainInstanceName
                    SecondaryInstance = $DestinationServer.DomainInstanceName
                    PrimaryDatabase   = $($db.Name)
                    SecondaryDatabase = $SecondaryDatabase
                    Result            = $setupResult
                    Comment           = $comment
                }

            } # for each database
        } # end for each destination server
    } # end process
    end {
        Write-Message -Message "Finished setting up log shipping." -Level Verbose
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias Invoke-DbaLogShipping
    }
}

tools\dbatools\functions\Get-DbaWsfcRole.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaWsfcRole {
    <#
    .SYNOPSIS
        Gets information about one or more clustered roles (resource groups) in a failover cluster.

    .DESCRIPTION
        Gets information about one or more clustered roles (resource groups) in a failover cluster.

        All Windows Server Failover Clustering (Wsfc) commands require local admin on each member node.

    .PARAMETER ComputerName
        The target cluster name. Can be a Role or the cluster name itself.

    .PARAMETER Credential
        Allows you to login to the cluster using alternative credentials.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Cluster, WSFC, FCI, HA
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaWsfcRole

    .EXAMPLE
        PS C:\> Get-DbaWsfcRole -ComputerName cluster01

        Gets role information from the failover cluster cluster01

    .EXAMPLE
        PS C:\> Get-DbaWsfcRole -ComputerName cluster01 | Select *

        Shows all role values, including the ones not shown in the default view

    #>
    [CmdletBinding()]
    param (
        [parameter(ValueFromPipeline)]
        [DbaInstanceParameter[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [switch]$EnableException
    )
    process {
        foreach ($computer in $computername) {
            $cluster = Get-DbaWsfcCluster -ComputerName $computer -Credential $Credential
            $role = Get-DbaCmObject -Computername $computer -Credential $Credential -Namespace root\MSCluster -ClassName MSCluster_ResourceGroup
            $role | Add-Member -Force -NotePropertyName State -NotePropertyValue (Get-ResourceState $resource.State)
            $role | Add-Member -Force -NotePropertyName ClusterName -NotePropertyValue $cluster.Name
            $role | Add-Member -Force -NotePropertyName ClusterFqdn -NotePropertyValue $cluster.Fqdn
            $role | Select-DefaultView -Property ClusterName, ClusterFqdn, Name, OwnerNode, State
        }
    }
}

tools\dbatools\functions\Invoke-DbaDbLogShipRecovery.ps1

function Invoke-DbaDbLogShipRecovery {
    <#
    .SYNOPSIS
        Invoke-DbaDbLogShipRecovery recovers log shipped databases to a normal state to act upon a migration or disaster.

    .DESCRIPTION
        By default all the databases for a particular instance are recovered.
        If the database is in the right state, either standby or recovering, the process will try to recover the database.

        At first the function will check if the backup source directory can still be reached.
        If so it will look up the last transaction log backup for the database. If that backup file is not the last copied file the log shipping copy job will be started.
        If the directory cannot be reached for the function will continue to the restoring process.
        After the copy job check is performed the job is disabled to prevent the job to run.

        For the restore the log shipping status is checked in the msdb database.
        If the last restored file is not the same as the last file name found, the log shipping restore job will be executed.
        After the restore job check is performed the job is disabled to prevent the job to run

        The last part is to set the database online by restoring the databases with recovery

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER Database
        Database to perform the restore for. This value can also be piped enabling multiple databases to be recovered.
        If this value is not supplied all databases will be recovered.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER NoRecovery
        Allows you to choose to not restore the database to a functional state (Normal) in the final steps of the process.
        By default the database is restored to a functional state (Normal).

    .PARAMETER InputObject
        Allows piped input from Get-DbaDatabase

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER Force
        Use this parameter to force the function to continue and perform any adjusting actions to successfully execute

    .PARAMETER Delay
        Set the delay in seconds to wait for the copy and/or restore jobs.
        By default the delay is 5 seconds

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .NOTES
        Tags: LogShipping
        Author: Sander Stad (@sqlstad), sqlstad.nl

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Invoke-DbaDbLogShipRecovery

    .EXAMPLE
        PS C:\> Invoke-DbaDbLogShipRecovery -SqlInstance server1

        Recovers all the databases on the instance that are enabled for log shipping

    .EXAMPLE
        PS C:\> Invoke-DbaDbLogShipRecovery -SqlInstance server1 -SqlCredential $cred -Verbose

        Recovers all the databases on the instance that are enabled for log shipping using a credential

    .EXAMPLE
        PS C:\> Invoke-DbaDbLogShipRecovery -SqlInstance server1 -database db_logship -Verbose

        Recovers the database "db_logship" to a normal status

    .EXAMPLE
        PS C:\> db1, db2, db3, db4 | Invoke-DbaDbLogShipRecovery -SqlInstance server1 -Verbose

        Recovers the database db1, db2, db3, db4 to a normal status

    .EXAMPLE
        PS C:\> Invoke-DbaDbLogShipRecovery -SqlInstance server1 -WhatIf

        Shows what would happen if the command were executed.

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param
    (
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [string[]]$Database,
        [PSCredential]$SqlCredential,
        [switch]$NoRecovery,
        [Alias('Silent')]
        [switch]$EnableException,
        [switch]$Force,
        [Parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Database[]]$InputObject,
        [int]$Delay = 5
    )
    begin {
        $stepCounter = 0
    }
    process {
        foreach ($instance in $SqlInstance) {
            if (-not $Force -and -not $Database) {
                Stop-Function -Message "You must specify a -Database or -Force for all databases" -Target $server.name
                return
            }
            $InputObject += Get-DbaDatabase -SqlInstance $instance -SqlCredential $SqlCredential -Database $Database
        }

        # Loop through all the databases
        foreach ($db in $InputObject) {
            $stepCounter = 0
            $server = $db.Parent
            $instance = $server.Name
            $activity = "Performing log shipping recovery for $($db.Name) on $($server.Name)"
            # Try to get the agent service details
            try {
                # Get the service details
                $agentStatus = $server.Query("SELECT COUNT(*) as AgentCount FROM master.dbo.sysprocesses WITH (nolock) WHERE Program_Name LIKE 'SQLAgent%'")

                if ($agentStatus.AgentCount -lt 1) {
                    Stop-Function -Message "The agent service is not in a running state. Please start the service." -ErrorRecord $_ -Target $server.name
                    return
                }
            } catch {
                Stop-Function -Message "Unable to get SQL Server Agent Service status" -ErrorRecord $_ -Target $server.name
                return
            }
            # Query for retrieving the log shipping information
            $query = "SELECT lss.primary_server, lss.primary_database, lsd.secondary_database, lss.backup_source_directory,
                    lss.backup_destination_directory, lss.last_copied_file, lss.last_copied_date,
                    lsd.last_restored_file, sj1.name AS 'copyjob', sj2.name AS 'restorejob'
                FROM msdb.dbo.log_shipping_secondary AS lss
                    INNER JOIN msdb.dbo.log_shipping_secondary_databases AS lsd ON lsd.secondary_id = lss.secondary_id
                    INNER JOIN msdb.dbo.sysjobs AS sj1 ON sj1.job_id = lss.copy_job_id
                    INNER JOIN msdb.dbo.sysjobs AS sj2 ON sj2.job_id = lss.restore_job_id
                WHERE lsd.secondary_database = '$($db.Name)'"

            # Retrieve the log shipping information from the secondary instance
            try {
                Write-Message -Message "Retrieving log shipping information from the secondary instance" -Level Verbose
                Write-ProgressHelper -Activity $activity -StepNumber ($stepCounter++) -Message "Retrieving log shipping information from the secondary instance"
                $logshipping_details = $server.Query($query)
            } catch {
                Stop-Function -Message "Error retrieving the log shipping details: $($_.Exception.Message)" -ErrorRecord $_ -Target $server.name
                return
            }

            # Check if there are any databases to recover
            if ($null -eq $logshipping_details) {
                Stop-Function -Message "The database $db is not configured as a secondary database for log shipping." -Continue
            } else {
                # Loop through each of the log shipped databases
                foreach ($ls in $logshipping_details) {
                    $secondarydb = $ls.secondary_database

                    $recoverResult = "Success"
                    $comment = ""
                    $jobOutputs = @()

                    # Check if the database is in the right state
                    if ($server.Databases[$secondarydb].Status -notin ('Normal, Standby', 'Standby', 'Restoring')) {
                        Stop-Function -Message "The database $db doesn't have the right status to be recovered" -Continue
                    } else {
                        Write-Message -Message "Started Recovery for $secondarydb" -Level Verbose

                        # Start the job to get the latest files
                        if ($PSCmdlet.ShouldProcess($server.name, ("Starting copy job $($ls.copyjob)"))) {
                            Write-Message -Message "Starting copy job $($ls.copyjob)" -Level Verbose

                            Write-ProgressHelper -Activity $activity -StepNumber ($stepCounter++) -Message "Starting copy job"
                            try {
                                $null = Start-DbaAgentJob -SqlInstance $instance -SqlCredential $sqlcredential -Job $ls.copyjob
                            } catch {
                                $recoverResult = "Failed"
                                $comment = "Something went wrong starting the copy job $($ls.copyjob)"
                                Stop-Function -Message "Something went wrong starting the copy job.`n$($_)" -ErrorRecord $_ -Target $server.name
                            }

                            if ($recoverResult -ne 'Failed') {
                                Write-Message -Message "Copying files to $($ls.backup_destination_directory)" -Level Verbose

                                Write-Message -Message "Waiting for the copy action to complete.." -Level Verbose

                                # Get the job status
                                $jobStatus = Get-DbaAgentJob -SqlInstance $instance -SqlCredential $sqlcredential -Job $ls.copyjob

                                while ($jobStatus.CurrentRunStatus -ne 'Idle') {
                                    # Sleep for while to let the files be copied
                                    Start-Sleep -Seconds $Delay

                                    # Get the job status
                                    $jobStatus = Get-DbaAgentJob -SqlInstance $instance -SqlCredential $sqlcredential -Job $ls.copyjob
                                }

                                # Check the lat outcome of the job
                                if ($jobStatus.LastRunOutcome -eq 'Failed') {
                                    $recoverResult = "Failed"
                                    $comment = "The copy job for database $db failed. Please check the error log."
                                    Stop-Function -Message "The copy job for database $db failed. Please check the error log."
                                }

                                $jobOutputs += $jobStatus

                                Write-Message -Message "Copying of backup files finished" -Level Verbose
                            }
                        } # if should process

                        # Disable the log shipping copy job on the secondary instance
                        if ($recoverResult -ne 'Failed') {
                            Write-ProgressHelper -Activity $activity -StepNumber ($stepCounter++) -Message "Disabling copy job"

                            if ($PSCmdlet.ShouldProcess($server.name, "Disabling copy job $($ls.copyjob)")) {
                                try {
                                    Write-Message -Message "Disabling copy job $($ls.copyjob)" -Level Verbose
                                    $null = Set-DbaAgentJob -SqlInstance $instance -SqlCredential $sqlcredential -Job $ls.copyjob -Disabled
                                } catch {
                                    $recoverResult = "Failed"
                                    $comment = "Something went wrong disabling the copy job."
                                    Stop-Function -Message "Something went wrong disabling the copy job.`n$($_)" -ErrorRecord $_ -Target $server.name
                                }
                            }
                        }

                        if ($recoverResult -ne 'Failed') {
                            # Start the restore job
                            Write-ProgressHelper -Activity $activity -StepNumber ($stepCounter++) -Message "Starting restore job"

                            if ($PSCmdlet.ShouldProcess($server.name, ("Starting restore job " + $ls.restorejob))) {
                                Write-Message -Message "Starting restore job $($ls.restorejob)" -Level Verbose
                                try {
                                    $null = Start-DbaAgentJob -SqlInstance $instance -SqlCredential $sqlcredential -Job $ls.restorejob
                                } catch {
                                    $comment = "Something went wrong starting the restore job."
                                    Stop-Function -Message "Something went wrong starting the restore job.`n$($_)" -ErrorRecord $_ -Target $server.name
                                }

                                Write-Message -Message "Waiting for the restore action to complete.." -Level Verbose

                                # Get the job status
                                $jobStatus = Get-DbaAgentJob -SqlInstance $instance -SqlCredential $sqlcredential -Job $ls.restorejob

                                while ($jobStatus.CurrentRunStatus -ne 'Idle') {
                                    # Sleep for while to let the files be copied
                                    Start-Sleep -Seconds $Delay

                                    # Get the job status
                                    $jobStatus = Get-DbaAgentJob -SqlInstance $instance -SqlCredential $sqlcredential -Job $ls.restorejob
                                }

                                # Check the lat outcome of the job
                                if ($jobStatus.LastRunOutcome -eq 'Failed') {
                                    $recoverResult = "Failed"
                                    $comment = "The restore job for database $db failed. Please check the error log."
                                    Stop-Function -Message "The restore job for database $db failed. Please check the error log."
                                }

                                $jobOutputs += $jobStatus
                            }
                        }

                        if ($recoverResult -ne 'Failed') {
                            # Disable the log shipping restore job on the secondary instance
                            if ($PSCmdlet.ShouldProcess($server.name, "Disabling restore job $($ls.restorejob)")) {
                                try {
                                    Write-Message -Message ("Disabling restore job " + $ls.restorejob) -Level Verbose
                                    $null = Set-DbaAgentJob -SqlInstance $instance -SqlCredential $sqlcredential -Job $ls.restorejob -Disabled
                                } catch {
                                    $recoverResult = "Failed"
                                    $comment = "Something went wrong disabling the restore job."
                                    Stop-Function -Message "Something went wrong disabling the restore job.`n$($_)" -ErrorRecord $_ -Target $server.name
                                }
                            }
                        }

                        if ($recoverResult -ne 'Failed') {
                            # Check if the database needs to recovered to its normal state
                            if ($NoRecovery -eq $false) {
                                if ($PSCmdlet.ShouldProcess($secondarydb, "Restoring database with recovery")) {
                                    Write-Message -Message "Restoring the database to it's normal state" -Level Verbose
                                    try {
                                        $query = "RESTORE DATABASE [$secondarydb] WITH RECOVERY"
                                        $server.Query($query)

                                    } catch {
                                        $recoverResult = "Failed"
                                        $comment = "Something went wrong restoring the database to a normal state."
                                        Stop-Function -Message "Something went wrong restoring the database to a normal state.`n$($_)" -ErrorRecord $_ -Target $secondarydb
                                    }
                                }
                            } else {
                                $comment = "Skipping restore with recovery."
                                Write-Message -Message "Skipping restore with recovery" -Level Verbose
                            }

                            Write-Message -Message ("Finished Recovery for $secondarydb") -Level Verbose
                        }

                        # Reset the log ship details
                        $logshipping_details = $null

                        [PSCustomObject]@{
                            ComputerName  = $server.ComputerName
                            InstanceName  = $server.InstanceName
                            SqlInstance   = $server.DomainInstanceName
                            Database      = $secondarydb
                            RecoverResult = $recoverResult
                            Comment       = $comment
                        }

                    }
                }
            }
            Write-Progress -Activity $activity -Completed
            $stepCounter = 0
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias Invoke-DbaLogShippingRecovery
    }
}

tools\dbatools\functions\Invoke-DbaDbMirrorFailover.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Invoke-DbaDbMirrorFailover {
    <#
    .SYNOPSIS
        Failover a mirrored database

    .DESCRIPTION
        Failover a mirrored database

    .PARAMETER SqlInstance
        SQL Server name or SMO object representing the primary SQL Server.

    .PARAMETER SqlCredential
        Login to the primary instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The database or databases to mirror

    .PARAMETER InputObject
        Allows piping from Get-DbaDatabase

    .PARAMETER Force
        Force Failover and allow data loss

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Mirror, HA
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        TODO: add service accounts

    .LINK
        https://dbatools.io/Invoke-DbaDbMirrorFailover

    .EXAMPLE
        PS C:\> Invoke-DbaDbMirrorFailover -SqlInstance sql2016 -Database pubs

        Fails over the pubs database on sql2016. Prompts for confirmation.

    .EXAMPLE
        PS C:\> Get-DbaDatabase -SqlInstance sql2016 -Database pubs | Invoke-DbaDbMirrorFailover -Force -Confirm:$false

        Forces the failover of the pubs database on sql2016 and allows data loss.
        Does not prompt for confirmation.

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'High')]
    param (
        [DbaInstanceParameter]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$Database,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Database[]]$InputObject,
        [switch]$Force,
        [switch]$EnableException
    )
    process {
        if ((Test-Bound -ParameterName SqlInstance) -and (Test-Bound -Not -ParameterName Database)) {
            Stop-Function -Message "Database is required when SqlInstance is specified"
            return
        }

        $InputObject += Get-DbaDatabase -SqlInstance $SqlInstance -SqlCredential $SqlCredential -Database $Database

        foreach ($db in $InputObject) {
            # if it's async, you have to break the mirroring and allow data loss
            # alter database set partner force_service_allow_data_loss
            # if it's sync mirroring you know it's all in sync, so you can just do alter database [dbname] set partner failover
            if ($Force) {
                if ($Pscmdlet.ShouldProcess($db.Parent.Name, "Forcing failover of $db and allowing data loss")) {
                    $db | Set-DbaDbMirror -State ForceFailoverAndAllowDataLoss
                }
            } else {
                if ($Pscmdlet.ShouldProcess($db.Parent.Name, "Setting safety level to full and failing over $db to partner server")) {
                    $db | Set-DbaDbMirror -SafetyLevel Full
                    $db | Set-DbaDbMirror -State Failover
                }
            }
        }
    }
}

tools\dbatools\functions\Invoke-DbaDbMirroring.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Invoke-DbaDbMirroring {
    <#
    .SYNOPSIS
        Automates the creation of database mirrors.

    .DESCRIPTION
        Automates the creation of database mirrors.

        * Verifies that a mirror is possible
        * Sets the recovery model to Full if needed
        * If the database does not exist on mirror or witness, a backup/restore is performed
        * Sets up endpoints if necessary
        * Creates a login and grants permissions to service accounts if needed
        * Starts endpoints if needed
        * Sets up partner for mirror
        * Sets up partner for primary
        * Sets up witness if one is specified

        NOTE: If a backup / restore is performed, the backups will be left in tact on the network share.

    .PARAMETER Primary
        SQL Server name or SMO object representing the primary SQL Server.

    .PARAMETER PrimarySqlCredential
        Login to the primary instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Mirror
        SQL Server name or SMO object representing the mirror SQL Server.

    .PARAMETER MirrorSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Witness
        SQL Server name or SMO object representing the witness SQL Server.

    .PARAMETER WitnessSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The database or databases to mirror.

    .PARAMETER SharedPath
        The network share where the backups will be backed up and restored from.

        Each SQL Server service account must have access to this share.

        NOTE: If a backup / restore is performed, the backups will be left in tact on the network share.

    .PARAMETER InputObject
        Enables piping from Get-DbaDatabase.

    .PARAMETER UseLastBackup
        Use the last full backup of database.

    .PARAMETER Force
        Drop and recreate the database on remote servers using fresh backup.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Mirror, HA
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Invoke-DbaDbMirroring

    .EXAMPLE
        PS C:\> $params = @{
        >> Primary = 'sql2017a'
        >> Mirror = 'sql2017b'
        >> MirrorSqlCredential = 'sqladmin'
        >> Witness = 'sql2019'
        >> Database = 'pubs'
        >> SharedPath = '\\nas\sql\share'
        >> }
        >>
        PS C:\> Invoke-DbaDbMirror @params

        Performs a bunch of checks to ensure the pubs database on sql2017a
        can be mirrored from sql2017a to sql2017b. Logs in to sql2019 and sql2017a
        using Windows credentials and sql2017b using a SQL credential.

        Prompts for confirmation for most changes. To avoid confirmation, use -Confirm:$false or
        use the syntax in the second example.

    .EXAMPLE
        PS C:\> $params = @{
        >> Primary = 'sql2017a'
        >> Mirror = 'sql2017b'
        >> MirrorSqlCredential = 'sqladmin'
        >> Witness = 'sql2019'
        >> Database = 'pubs'
        >> SharedPath = '\\nas\sql\share'
        >> Force = $true
        >> Confirm = $false
        >> }
        >>
        PS C:\> Invoke-DbaDbMirror @params

        Performs a bunch of checks to ensure the pubs database on sql2017a
        can be mirrored from sql2017a to sql2017b. Logs in to sql2019 and sql2017a
        using Windows credentials and sql2017b using a SQL credential.

        Drops existing pubs database on Mirror and Witness and restores them with
        a fresh backup.

        Does all the things in the decription, does not prompt for confirmation.

    .EXAMPLE
        PS C:\> $map = @{ 'database_data' = 'M:\Data\database_data.mdf' 'database_log' = 'L:\Log\database_log.ldf' }
        PS C:\> Get-ChildItem \\nas\seed | Restore-DbaDatabase -SqlInstance sql2017b -FileMapping $map -NoRecovery
        PS C:\> Get-DbaDatabase -SqlInstance sql2017a -Database pubs | Invoke-DbaDbMirroring -Mirror sql2017b -Confirm:$false

        Restores backups from sql2017a to a specific file struture on sql2017b then creates mirror with no prompts for confirmation.

    .EXAMPLE
        PS C:\> Get-DbaDatabase -SqlInstance sql2017a -Database pubs |
        >> Invoke-DbaDbMirroring -Mirror sql2017b -UseLastBackup -Confirm:$false

        Mirrors pubs on sql2017a to sql2017b and uses the last full and logs from sql2017a to seed. Doesn't prompt for confirmation.

       #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'High')]
    param (
        [DbaInstanceParameter]$Primary,
        [PSCredential]$PrimarySqlCredential,
        [parameter(Mandatory)]
        [DbaInstanceParameter[]]$Mirror,
        [PSCredential]$MirrorSqlCredential,
        [DbaInstanceParameter]$Witness,
        [PSCredential]$WitnessSqlCredential,
        [string[]]$Database,
        [Alias("NetworkShare")]
        [string]$SharedPath,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Database[]]$InputObject,
        [switch]$UseLastBackup,
        [switch]$Force,
        [switch]$EnableException
    )
    begin {
        Test-DbaDeprecation -DeprecatedOn 1.0.0 -Parameter NetworkShare -CustomMessage "Using the parameter NetworkShare is deprecated. This parameter will be removed in version 1.0.0 or before. Use SharedPath instead."
        
        $params = $PSBoundParameters
        $null = $params.Remove('UseLastBackup')
        $null = $params.Remove('Force')
        $null = $params.Remove('Confirm')
        $null = $params.Remove('Whatif')
    }
    process {
        if ((Test-Bound -ParameterName Primary) -and (Test-Bound -Not -ParameterName Database)) {
            Stop-Function -Message "Database is required when Primary is specified"
            return
        }

        if ($Force -and (-not $SharedPath -and -not $UseLastBackup)) {
            Stop-Function -Message "SharedPath or UseLastBackup is required when Force is used"
            return
        }

        if ($Primary) {
            $InputObject += Get-DbaDatabase -SqlInstance $Primary -SqlCredential $PrimarySqlCredential -Database $Database
        }

        foreach ($primarydb in $InputObject) {
            $stepCounter = 0
            $Primary = $source = $primarydb.Parent

            try {
                $dest = Connect-SqlInstance -SqlInstance $Mirror -SqlCredential $MirrorSqlCredential

                if ($Witness) {
                    $witserver = Connect-SqlInstance -SqlInstance $Witness -SqlCredential $WitnessSqlCredential
                }
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $dbName = $primarydb.Name

            Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Validating mirror setup"
            # Thanks to https://github.com/mmessano/PowerShell/blob/master/SQL-ConfigureDatabaseMirroring.ps1 for the tips

            $validation = Invoke-DbMirrorValidation @params

            if ((Test-Bound -ParameterName SharedPath) -and -not $validation.AccessibleShare) {
                Stop-Function -Continue -Message "Cannot access $SharedPath from $($dest.Name)"
            }

            if (-not $validation.EditionMatch) {
                Stop-Function -Continue -Message "This mirroring configuration is not supported. Because the principal server instance, $source, is $($source.EngineEdition) Edition, the mirror server instance must also be $($source.EngineEdition) Edition."
            }

            if ($validation.MirroringStatus -ne "None") {
                Stop-Function -Continue -Message "Cannot setup mirroring on database ($dbname) due to its current mirroring state: $($primarydb.MirroringStatus)"
            }

            if ($primarydb.Status -ne "Normal") {
                Stop-Function -Continue -Message "Cannot setup mirroring on database ($dbname) due to its current state: $($primarydb.Status)"
            }

            Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Setting recovery model for $dbName on $($source.Name) to Full"

            if ($primarydb.RecoveryModel -ne "Full") {
                if ((Test-Bound -ParameterName UseLastBackup)) {
                    Stop-Function -Continue -Message "$dbName not set to full recovery. UseLastBackup cannot be used."
                } else {
                    Set-DbaDbRecoveryModel -SqlInstance $source -Database $primarydb.Name -RecoveryModel Full
                }
            }

            Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Copying $dbName from primary to mirror"
            if (-not $validation.DatabaseExistsOnMirror -or $Force) {
                if ($UseLastBackup) {
                    $allbackups = Get-DbaBackupHistory -SqlInstance $primarydb.Parent -Database $primarydb.Name -IncludeCopyOnly -Last
                } else {
                    if ($Force -or $Pscmdlet.ShouldProcess("$Primary", "Creating full and log backups of $primarydb on $SharedPath")) {
                        $fullbackup = $primarydb | Backup-DbaDatabase -BackupDirectory $SharedPath -Type Full
                        $logbackup = $primarydb | Backup-DbaDatabase -BackupDirectory $SharedPath -Type Log
                        $allbackups = $fullbackup, $logbackup
                    }
                }
                if ($Pscmdlet.ShouldProcess("$Mirror", "Restoring full and log backups of $primarydb from $Primary")) {
                    foreach ($mirrorinstance in $Mirror) {
                        try {
                            $null = $allbackups | Restore-DbaDatabase -SqlInstance $mirrorinstance -SqlCredential $MirrorSqlCredential -WithReplace -NoRecovery -TrustDbBackupHistory -EnableException
                        } catch {
                            Stop-Function -Message "Failure" -ErrorRecord $_ -Target $dest -Continue
                        }
                    }
                }

                if ($SharedPath) {
                    Write-Message -Level Verbose -Message "Backups still exist on $SharedPath"
                }
            }

            $mirrordb = Get-DbaDatabase -SqlInstance $dest -Database $dbName

            Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Copying $dbName from primary to witness"

            if ($Witness -and (-not $validation.DatabaseExistsOnWitness -or $Force)) {
                if (-not $allbackups) {
                    if ($UseLastBackup) {
                        $allbackups = Get-DbaBackupHistory -SqlInstance $primarydb.Parent -Database $primarydb.Name -IncludeCopyOnly -Last
                    } else {
                        if ($Force -or $Pscmdlet.ShouldProcess("$Primary", "Creating full and log backups of $primarydb on $SharedPath")) {
                            $fullbackup = $primarydb | Backup-DbaDatabase -BackupDirectory $SharedPath -Type Full
                            $logbackup = $primarydb | Backup-DbaDatabase -BackupDirectory $SharedPath -Type Log
                            $allbackups = $fullbackup, $logbackup
                        }
                    }
                }

                if ($Pscmdlet.ShouldProcess("$Witness", "Restoring full and log backups of $primarydb from $Primary")) {
                    try {
                        $null = $allbackups | Restore-DbaDatabase -SqlInstance $Witness -SqlCredential $WitnessSqlCredential -WithReplace -NoRecovery -TrustDbBackupHistory -EnableException
                    } catch {
                        Stop-Function -Message "Failure" -ErrorRecord $_ -Target $witserver -Continue
                    }
                }
            }

            $primaryendpoint = Get-DbaEndpoint -SqlInstance $source | Where-Object EndpointType -eq DatabaseMirroring
            $mirrorendpoint = Get-DbaEndpoint -SqlInstance $dest | Where-Object EndpointType -eq DatabaseMirroring

            if (-not $primaryendpoint) {
                Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Setting up endpoint for primary"
                $primaryendpoint = New-DbaEndpoint -SqlInstance $source -Type DatabaseMirroring -Role Partner -Name Mirroring -EncryptionAlgorithm RC4
                $null = $primaryendpoint | Stop-DbaEndpoint
                $null = $primaryendpoint | Start-DbaEndpoint
            }

            if (-not $mirrorendpoint) {
                Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Setting up endpoint for mirror"
                $mirrorendpoint = New-DbaEndpoint -SqlInstance $dest -Type DatabaseMirroring -Role Partner -Name Mirroring -EncryptionAlgorithm RC4
                $null = $mirrorendpoint | Stop-DbaEndpoint
                $null = $mirrorendpoint | Start-DbaEndpoint
            }

            if ($witserver) {
                Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Setting up endpoint for witness"
                $witnessendpoint = Get-DbaEndpoint -SqlInstance $witserver | Where-Object EndpointType -eq DatabaseMirroring
                if (-not $witnessendpoint) {
                    $witnessendpoint = New-DbaEndpoint -SqlInstance $witserver -Type DatabaseMirroring -Role Witness -Name Mirroring -EncryptionAlgorithm RC4
                    $null = $witnessendpoint | Stop-DbaEndpoint
                    $null = $witnessendpoint | Start-DbaEndpoint
                }
            }

            Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Granting permissions to service account"

            $serviceaccounts = $source.ServiceAccount, $dest.ServiceAccount, $witserver.ServiceAccount | Select-Object -Unique

            foreach ($account in $serviceaccounts) {
                if ($Pscmdlet.ShouldProcess("primary, mirror and witness (if specified)", "Creating login $account and granting CONNECT ON ENDPOINT")) {
                    $null = New-DbaLogin -SqlInstance $source -Login $account -WarningAction SilentlyContinue
                    $null = New-DbaLogin -SqlInstance $dest -Login $account -WarningAction SilentlyContinue
                    try {
                        $null = $source.Query("GRANT CONNECT ON ENDPOINT::$primaryendpoint TO [$account]")
                        $null = $dest.Query("GRANT CONNECT ON ENDPOINT::$mirrorendpoint TO [$account]")
                        if ($witserver) {
                            $null = New-DbaLogin -SqlInstance $witserver -Login $account -WarningAction SilentlyContinue
                            $witserver.Query("GRANT CONNECT ON ENDPOINT::$witnessendpoint TO [$account]")
                        }
                    } catch {
                        Stop-Function -Continue -Message "Failure" -ErrorRecord $_
                    }
                }
            }

            Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Starting endpoints if necessary"
            try {
                $null = $primaryendpoint, $mirrorendpoint, $witnessendpoint | Start-DbaEndpoint -EnableException
            } catch {
                Stop-Function -Continue -Message "Failure" -ErrorRecord $_
            }

            try {
                Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Setting up partner for mirror"
                $null = $mirrordb | Set-DbaDbMirror -Partner $primaryendpoint.Fqdn -EnableException
            } catch {
                Stop-Function -Continue -Message "Failure on mirror" -ErrorRecord $_
            }

            try {
                Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Setting up partner for primary"
                $null = $primarydb | Set-DbaDbMirror -Partner $mirrorendpoint.Fqdn -EnableException
            } catch {
                Stop-Function -Continue -Message "Failure on primary" -ErrorRecord $_
            }

            try {
                if ($witnessendpoint) {
                    $null = $primarydb | Set-DbaDbMirror -Witness $witnessendpoint.Fqdn -EnableException
                }
            } catch {
                Stop-Function -Continue -Message "Failure with the new last part" -ErrorRecord $_
            }

            if ($Pscmdlet.ShouldProcess("console", "Showing results")) {
                $results = [pscustomobject]@{
                    Primary  = $Primary
                    Mirror   = $Mirror -join ", "
                    Witness  = $Witness
                    Database = $primarydb.Name
                    Status   = "Success"
                }
                if ($Witness) {
                    $results | Select-DefaultView -Property Primary, Mirror, Witness, Database, Status
                } else {
                    $results | Select-DefaultView -Property Primary, Mirror, Database, Status
                }
            }
        }
    }
}

tools\dbatools\functions\Invoke-DbaDbShrink.ps1

function Invoke-DbaDbShrink {
    <#
    .SYNOPSIS
        Shrinks all files in a database. This is a command that should rarely be used.

        - Shrinks can cause severe index fragmentation (to the tune of 99%)
        - Shrinks can cause massive growth in the database's transaction log
        - Shrinks can require a lot of time and system resources to perform data movement

    .DESCRIPTION
        Shrinks all files in a database. Databases should be shrunk only when completely necessary.

        Many awesome SQL people have written about why you should not shrink your data files. Paul Randal and Kalen Delaney wrote great posts about this topic:

        http://www.sqlskills.com/blogs/paul/why-you-should-not-shrink-your-data-files
        http://sqlmag.com/sql-server/shrinking-data-files

        However, there are some cases where a database will need to be shrunk. In the event that you must shrink your database:

        1. Ensure you have plenty of space for your T-Log to grow
        2. Understand that shrinks require a lot of CPU and disk resources
        3. Consider running DBCC INDEXDEFRAG or ALTER INDEX ... REORGANIZE after the shrink is complete.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. Defaults to the default instance on localhost.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential).

    .PARAMETER Database
        The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto-populated from the server.

    .PARAMETER AllUserDatabases
        Run command against all user databases.

    .PARAMETER PercentFreeSpace
        Specifies how much free space to leave, defaults to 0.

    .PARAMETER ShrinkMethod
        Specifies the method that is used to shrink the database
        Default
        Data in pages located at the end of a file is moved to pages earlier in the file. Files are truncated to reflect allocated space.
        EmptyFile
        Migrates all of the data from the referenced file to other files in the same filegroup. (DataFile and LogFile objects only).
        NoTruncate
        Data in pages located at the end of a file is moved to pages earlier in the file.
        TruncateOnly
        Data distribution is not affected. Files are truncated to reflect allocated space, recovering free space at the end of any file.

    .PARAMETER StatementTimeout
        Timeout in minutes. Defaults to infinity (shrinks can take a while).

    .PARAMETER LogsOnly
        Deprecated. Use FileType instead.

    .PARAMETER FileType
        Specifies the files types that will be shrunk
        All - All Data and Log files are shrunk, using database shrink (Default)
        Data - Just the Data files are shrunk using file shrink
        Log - Just the Log files are shrunk using file shrink

    .PARAMETER StepSize
        Measured in bits - but no worries! PowerShell has a very cool way of formatting bits. Just specify something like: 1MB or 10GB. See the examples for more information.

        If specified, this will chunk a larger shrink operation into multiple smaller shrinks.
        If shrinking a file by a large amount there are benefits of doing multiple smaller chunks.

    .PARAMETER ExcludeIndexStats
        Exclude statistics about fragmentation.

    .PARAMETER ExcludeUpdateUsage
        Exclude DBCC UPDATE USAGE for database.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run.

    .PARAMETER Confirm
        Prompts for confirmation of every step. For example:

        Are you sure you want to perform this action?
        Performing the operation "Shrink database" on target "pubs on SQL2016\VNEXT".
        [Y] Yes  [A] Yes to All  [N] No  [L] No to All  [S] Suspend  [?] Help (default is "Y"):

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Shrink, Database
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Invoke-DbaDbShrink

    .EXAMPLE
        PS C:\> Invoke-DbaDbShrink -SqlInstance sql2016 -Database Northwind,pubs,Adventureworks2014

        Shrinks Northwind, pubs and Adventureworks2014 to have as little free space as possible.

    .EXAMPLE
        PS C:\> Invoke-DbaDbShrink -SqlInstance sql2014 -Database AdventureWorks2014 -PercentFreeSpace 50

        Shrinks AdventureWorks2014 to have 50% free space. So let's say AdventureWorks2014 was 1GB and it's using 100MB space. The database free space would be reduced to 50MB.

    .EXAMPLE
        PS C:\> Invoke-DbaDbShrink -SqlInstance sql2014 -Database AdventureWorks2014 -PercentFreeSpace 50 -FileType Data -StepSize 25MB

        Shrinks AdventureWorks2014 to have 50% free space, runs shrinks in 25MB chunks for improved performance.

    .EXAMPLE
        PS C:\> Invoke-DbaDbShrink -SqlInstance sql2012 -AllUserDatabases

        Shrinks all databases on SQL2012 (not ideal for production)

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'Low')]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [switch]$AllUserDatabases,
        [ValidateRange(0, 99)]
        [int]$PercentFreeSpace = 0,
        [ValidateSet('Default', 'EmptyFile', 'NoTruncate', 'TruncateOnly')]
        [string]$ShrinkMethod = "Default",
        [ValidateSet('All', 'Data', 'Log')]
        [string]$FileType = "All",
        [int]$StepSize,
        [int]$StatementTimeout = 0,
        [switch]$LogsOnly,
        [switch]$ExcludeIndexStats,
        [switch]$ExcludeUpdateUsage,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        if ($LogsOnly) {
            Test-DbaDeprecation -DeprecatedOn "1.0.0" -Parameter "LogsOnly"
            $FileType = 'Log'
        }
        if (-not $Database -and -not $ExcludeDatabase -and -not $AllUserDatabases) {
            Stop-Function -Message "You must specify databases to execute against using either -Database, -Exclude or -AllUserDatabases"
            return
        }

        if ((Test-Bound -ParameterName StepSize) -and $stepsize -lt 1024) {
            Stop-Function -Message "StepSize is measured in bits. Did you mean $StepSize bits? If so, please use 1024 or above. If not, then use the PowerShell bit notation like $($StepSize)MB or $($StepSize)GB"
            return
        }

        if ($stepsize) {
            $StepSizeKB = ([dbasize]($StepSize)).Kilobyte
        }
        $StatementTimeoutSeconds = $StatementTimeout * 60

        $sql = "SELECT
                  avg(avg_fragmentation_in_percent) as [avg_fragmentation_in_percent]
                , max(avg_fragmentation_in_percent) as [max_fragmentation_in_percent]
                FROM sys.dm_db_index_physical_stats (DB_ID(), NULL, NULL, NULL, NULL) AS indexstats
                WHERE indexstats.avg_fragmentation_in_percent > 0 AND indexstats.page_count > 100
                GROUP BY indexstats.database_id"
    }

    process {
        if (Test-FunctionInterrupt) { return }

        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $server.ConnectionContext.StatementTimeout = $StatementTimeoutSeconds
            Write-Message -Level Verbose -Message "Connection timeout set to $StatementTimeout"

            $dbs = $server.Databases | Where-Object {$_.IsAccessible}

            if ($Database) {
                $dbs = $dbs | Where-Object Name -In $Database
            }

            if ($ExcludeDatabase) {
                $dbs = $dbs | Where-Object Name -NotIn $ExcludeDatabase
            }

            foreach ($db in $dbs) {

                Write-Message -Level Verbose -Message "Processing $db on $instance"

                if ($db.IsDatabaseSnapshot) {
                    Write-Message -Level Warning -Message "The database $db on server $instance is a snapshot and cannot be shrunk. Skipping database."
                    continue
                }

                $files = @()
                if ($FileType -in ('Log', 'All')) {
                    $files += $db.LogFiles
                }
                if ($FileType -in ('Data', 'All')) {
                    $files += $db.FileGroups.Files
                }

                foreach ($file in $files) {
                    $startingSize = $file.Size
                    $spaceUsed = $file.UsedSpace
                    $spaceAvailable = ($file.Size - $file.UsedSpace)
                    $desiredSpaceAvailable = [math]::ceiling((($PercentFreeSpace / 100)) * $spaceUsed)
                    $desiredFileSize = $spaceUsed + $desiredSpaceAvailable

                    Write-Message -Level Verbose -Message "File: $($file.Name)"
                    Write-Message -Level Verbose -Message "Initial Size (KB): $([int]$startingSize)"
                    Write-Message -Level Verbose -Message "Space Used (KB): $([int]$spaceUsed)"
                    Write-Message -Level Verbose -Message "Initial Freespace (KB): $([int]$spaceAvailable)"
                    Write-Message -Level Verbose -Message "Target Freespace (KB): $([int]$desiredSpaceAvailable)"
                    Write-Message -Level Verbose -Message "Target FileSize (KB): $([int]$desiredFileSize)"

                    if ($spaceAvailable -le $desiredSpaceAvailable) {
                        Write-Message -Level Warning -Message "File size of ($startingSize) is less than or equal to the desired outcome ($desiredFileSize) for $($file.Name)"
                    } else {
                        if ($Pscmdlet.ShouldProcess("$db on $instance", "Shrinking from $([int]$startingSize)KB to $([int]$desiredFileSize)KB")) {
                            if ($server.VersionMajor -gt 8 -and $ExcludeIndexStats -eq $false) {
                                Write-Message -Level Verbose -Message "Getting starting average fragmentation"
                                $dataRow = $server.Query($sql, $db.name)
                                $startingFrag = $dataRow.avg_fragmentation_in_percent
                                $startingTopFrag = $dataRow.max_fragmentation_in_percent
                            } else {
                                $startingTopFrag = $startingFrag = $null
                            }

                            $start = Get-Date
                            try {
                                Write-Message -Level Verbose -Message "Beginning shrink of files"

                                $shrinkGap = ($startingSize - $desiredFileSize)
                                Write-Message -Level Verbose -Message "ShrinkGap: $([int]$shrinkGap) KB"
                                Write-Message -Level Verbose -Message "Step Size: $(([dbasize]$StepSize).Megabyte) MB"

                                if ($StepSizeKB -and ($shrinkGap -gt $stepSizeKB)) {
                                    for ($i = 1; $i -le [int](($shrinkGap) / $stepSizeKB); $i++) {
                                        Write-Message -Level Verbose -Message "Step: $i"
                                        $shrinkSize = $startingSize - (($StepSizeKB * 1024 * 1024) * $i)
                                        if ($shrinkSize -lt $desiredFileSize) {
                                            $shrinkSize = $desiredFileSize
                                        }
                                        Write-Message -Level Verbose -Message ("Shrinking {0} to {1}" -f $file.Name, $shrinkSize)
                                        $file.Shrink(($shrinkSize / 1024), $ShrinkMethod)
                                        $file.Refresh()

                                        if ($startingSize -eq $file.Size) {
                                            Write-Message -Level Verbose -Message ("Unable to shrink further")
                                            break
                                        }
                                    }
                                } else {
                                    $file.Shrink(($desiredFileSize / 1024), $ShrinkMethod)
                                    $file.Refresh()
                                }
                                $success = $true
                            } catch {
                                $success = $false
                                Stop-Function -message "Failure" -EnableException $EnableException -ErrorRecord $_ -Continue
                                continue
                            }
                            $end = Get-Date
                            $finalFileSize = $file.Size
                            $finalSpaceAvailable = ($file.Size - $file.UsedSpace)
                            Write-Message -Level Verbose -Message "Final file size: $([int]$finalFileSize) KB"
                            Write-Message -Level Verbose -Message "Final file space available: $($finalSpaceAvailable) KB"

                            if ($server.VersionMajor -gt 8 -and $ExcludeIndexStats -eq $false -and $success -and $FileType -ne 'Log') {
                                Write-Message -Level Verbose -Message "Getting ending average fragmentation"
                                $dataRow = $server.Query($sql, $db.name)
                                $endingDefrag = $dataRow.avg_fragmentation_in_percent
                                $endingTopDefrag = $dataRow.max_fragmentation_in_percent
                            } else {
                                $endingTopDefrag = $endingDefrag = $null
                            }

                            $timSpan = New-TimeSpan -Start $start -End $end
                            $ts = [TimeSpan]::fromseconds($timSpan.TotalSeconds)
                            $elapsed = "{0:HH:mm:ss}" -f ([datetime]$ts.Ticks)

                            $object = [PSCustomObject]@{
                                ComputerName                = $server.ComputerName
                                InstanceName                = $server.ServiceName
                                SqlInstance                 = $server.DomainInstanceName
                                Database                    = $db.name
                                File                        = $file.name
                                Start                       = $start
                                End                         = $end
                                Elapsed                     = $elapsed
                                Success                     = $success
                                InitialSize                 = [dbasize]($startingSize * 1024)
                                InitialUsed                 = [dbasize]($spaceUsed * 1024)
                                InitialAvailable            = [dbasize]($spaceAvailable * 1024)
                                TargetAvailable             = [dbasize]($desiredSpaceAvailable * 1024)
                                FinalAvailable              = [dbasize]($finalSpaceAvailable * 1024)
                                FinalSize                   = [dbasize]($finalFileSize * 1024)
                                InitialAverageFragmentation = [math]::Round($startingFrag, 1)
                                FinalAverageFragmentation   = [math]::Round($endingDefrag, 1)
                                InitialTopFragmentation     = [math]::Round($startingTopFrag, 1)
                                FinalTopFragmentation       = [math]::Round($endingTopDefrag, 1)
                                Notes                       = "Database shrinks can cause massive index fragmentation and negatively impact performance. You should now run DBCC INDEXDEFRAG or ALTER INDEX ... REORGANIZE"
                            }
                            if ($ExcludeIndexStats) {
                                Select-DefaultView -InputObject $object -ExcludeProperty InitialAverageFragmentation, FinalAverageFragmentation, InitialTopFragmentation, FinalTopFragmentation
                            } else {
                                $object
                            }
                        }
                    }
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias Invoke-DbaDatabaseShrink
    }
}

tools\dbatools\functions\Invoke-DbaDbUpgrade.ps1

function Invoke-DbaDbUpgrade {
    <#
    .SYNOPSIS
        Take a database and upgrades it to compatibility of the SQL Instance its hosted on. Based on https://thomaslarock.com/2014/06/upgrading-to-sql-server-2014-a-dozen-things-to-check/

    .DESCRIPTION
        Updates compatibility level, then runs CHECKDB with data_purity, DBCC updateusage, sp_updatestats and finally sp_refreshview against all user views.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        SqlCredential object used to connect to the SQL Server as a different user.

    .PARAMETER Database
        The database(s) to process - this list is autopopulated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is autopopulated from the server

    .PARAMETER AllUserDatabases
        Run command against all user databases

    .PARAMETER Force
        Don't skip over databases that are already at the same level the instance is

    .PARAMETER NoCheckDb
        Skip checkdb

    .PARAMETER NoUpdateUsage
        Skip usage update

    .PARAMETER NoUpdateStats
        Skip stats update

    .PARAMETER NoRefreshView
        Skip view update

    .PARAMETER InputObject
        A collection of databases (such as returned by Get-DbaDatabase)

    .PARAMETER WhatIf
        Shows what would happen if the command were to run

    .PARAMETER Confirm
        Prompts for confirmation of every step. For example:

        Are you sure you want to perform this action?
        Performing the operation "Update database" on target "pubs on SQL2016\VNEXT".
        [Y] Yes  [A] Yes to All  [N] No  [L] No to All  [S] Suspend  [?] Help (default is "Y"):

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Shrink, Database
        Author: Stephen Bennett, https://sqlnotesfromtheunderground.wordpress.com/

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Invoke-DbaDbUpgrade

    .EXAMPLE
        PS C:\> Invoke-DbaDbUpgrade -SqlInstance PRD-SQL-MSD01 -Database Test

        Runs the below processes against the databases
        -- Puts compatibility of database to level of SQL Instance
        -- Runs CHECKDB DATA_PURITY
        -- Runs DBCC UPDATESUSAGE
        -- Updates all users statistics
        -- Runs sp_refreshview against every view in the database

    .EXAMPLE
        PS C:\> Invoke-DbaDbUpgrade -SqlInstance PRD-SQL-INT01 -Database Test -NoRefreshView

        Runs the upgrade command skipping the sp_refreshview update on all views

    .EXAMPLE
        PS C:\> Invoke-DbaDbUpgrade -SqlInstance PRD-SQL-INT01 -Database Test -Force

        If database Test is already at the correct compatibility, runs every necessary step

    .EXAMPLE
        PS C:\> Get-DbaDatabase -SqlInstance sql2016 | Out-GridView -Passthru | Invoke-DbaDbUpgrade

        Get only specific databases using GridView and pass those to Invoke-DbaDbUpgrade

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [parameter(Position = 0)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [System.Management.Automation.PSCredential]$SqlCredential,
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [switch]$NoCheckDb,
        [switch]$NoUpdateUsage,
        [switch]$NoUpdateStats,
        [switch]$NoRefreshView,
        [switch]$AllUserDatabases,
        [switch]$Force,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Database[]]$InputObject,
        [Alias('Silent')]
        [switch]$EnableException
    )
    process {

        if (Test-Bound -not 'SqlInstance', 'InputObject') {
            Write-Message -Level Warning -Message "You must specify either a SQL instance or pipe a database collection"
            continue
        }

        if (Test-Bound -not 'Database', 'InputObject', 'ExcludeDatabase', 'AllUserDatabases') {
            Write-Message -Level Warning -Message "You must explicitly specify a database. Use -Database, -ExcludeDatabase, -AllUserDatabases or pipe a database collection"
            continue
        }

        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
                $server.ConnectionContext.StatementTimeout = [Int32]::MaxValue
            } catch {
                Stop-Function -Message "Failed to process Instance $Instance" -ErrorRecord $_ -Target $instance -Continue
            }
            $InputObject += $server.Databases | Where-Object IsAccessible
        }

        $InputObject = $InputObject | Where-Object { $_.IsSystemObject -eq $false }
        if ($Database) {
            $InputObject = $InputObject | Where-Object { $_.Name -contains $Database }
        }
        if ($ExcludeDatabase) {
            $InputObject = $InputObject | Where-Object { $_.Name -notcontains $ExcludeDatabase }
        }

        foreach ($db in $InputObject) {
            # create objects to use in updates
            $server = $db.Parent
            $ServerVersion = $server.VersionMajor
            Write-Message -Level Verbose -Message "SQL Server is using Version: $ServerVersion"

            $ogcompat = $db.CompatibilityLevel
            $dbname = $db.Name
            $dbversion = switch ($db.CompatibilityLevel) {
                "Version100" { 10 } # SQL Server 2008
                "Version110" { 11 } # SQL Server 2012
                "Version120" { 12 } # SQL Server 2014
                "Version130" { 13 } # SQL Server 2016
                "Version140" { 14 } # SQL Server 2017
                default { 9 } # SQL Server 2005
            }
            if (-not $Force) {
                # skip over databases at the correct level, unless -Force
                if ($dbversion -ge $ServerVersion) {
                    Write-Message -Level VeryVerbose -Message "Skipping $db because compatibility is at the correct level. Use -Force if you want to run all the additional steps"
                    continue
                }
            }
            Write-Message -Level Verbose -Message "Updating $db compatibility to SQL Instance level"
            if ($dbversion -lt $ServerVersion) {
                If ($Pscmdlet.ShouldProcess($server, "Updating $db version on $server from $dbversion to $ServerVersion")) {
                    $Comp = $ServerVersion * 10
                    $tsqlComp = "ALTER DATABASE $db SET COMPATIBILITY_LEVEL = $Comp"
                    try {
                        $db.ExecuteNonQuery($tsqlComp)
                        $comResult = $Comp
                    } catch {
                        Write-Message -Level Warning -Message "Failed run Compatibility Upgrade" -ErrorRecord $_ -Target $instance
                        $comResult = "Fail"
                    }
                }
            } else {
                $comResult = "No change"
            }

            if (!($NoCheckDb)) {
                Write-Message -Level Verbose -Message "Updating $db with DBCC CHECKDB DATA_PURITY"
                If ($Pscmdlet.ShouldProcess($server, "Updating $db with DBCC CHECKDB DATA_PURITY")) {
                    $tsqlCheckDB = "DBCC CHECKDB ('$dbname') WITH DATA_PURITY, NO_INFOMSGS"
                    try {
                        $db.ExecuteNonQuery($tsqlCheckDB)
                        $DataPurityResult = "Success"
                    } catch {
                        Write-Message -Level Warning -Message "Failed run DBCC CHECKDB with DATA_PURITY on $db" -ErrorRecord $_ -Target $instance
                        $DataPurityResult = "Fail"
                    }
                }
            } else {
                Write-Message -Level Verbose -Message "Ignoring CHECKDB DATA_PURITY"
            }

            if (!($NoUpdateUsage)) {
                Write-Message -Level Verbose -Message "Updating $db with DBCC UPDATEUSAGE"
                If ($Pscmdlet.ShouldProcess($server, "Updating $db with DBCC UPDATEUSAGE")) {
                    $tsqlUpdateUsage = "DBCC UPDATEUSAGE ($db) WITH NO_INFOMSGS;"
                    try {
                        $db.ExecuteNonQuery($tsqlUpdateUsage)
                        $UpdateUsageResult = "Success"
                    } catch {
                        Write-Message -Level Warning -Message "Failed to run DBCC UPDATEUSAGE on $db" -ErrorRecord $_ -Target $instance
                        $UpdateUsageResult = "Fail"
                    }
                }
            } else {
                Write-Message -Level Verbose -Message "Ignore DBCC UPDATEUSAGE"
                $UpdateUsageResult = "Skipped"
            }

            if (!($NoUpdatestats)) {
                Write-Message -Level Verbose -Message "Updating $db statistics"
                If ($Pscmdlet.ShouldProcess($server, "Updating $db statistics")) {
                    $tsqlStats = "EXEC sp_updatestats;"
                    try {
                        $db.ExecuteNonQuery($tsqlStats)
                        $UpdateStatsResult = "Success"
                    } catch {
                        Write-Message -Level Warning -Message "Failed to run sp_updatestats on $db" -ErrorRecord $_ -Target $instance
                        $UpdateStatsResult = "Fail"
                    }
                }
            } else {
                Write-Message -Level Verbose -Message "Ignoring sp_updatestats"
                $UpdateStatsResult = "Skipped"
            }

            if (!($NoRefreshView)) {
                Write-Message -Level Verbose -Message "Refreshing $db Views"
                $dbViews = $db.Views | Where-Object IsSystemObject -eq $false
                $RefreshViewResult = "Success"
                foreach ($dbview in $dbviews) {
                    $viewName = $dbView.Name
                    $viewSchema = $dbView.Schema
                    $fullName = $viewSchema + "." + $viewName

                    $tsqlupdateView = "EXECUTE sp_refreshview N'$fullName';  "

                    If ($Pscmdlet.ShouldProcess($server, "Refreshing view $fullName on $db")) {
                        try {
                            $db.ExecuteNonQuery($tsqlupdateView)
                        } catch {
                            Write-Message -Level Warning -Message "Failed update view $fullName on $db" -ErrorRecord $_ -Target $instance
                            $RefreshViewResult = "Fail"
                        }
                    }
                }
            } else {
                Write-Message -Level Verbose -Message "Ignore View Refreshes"
                $RefreshViewResult = "Skipped"
            }

            If ($Pscmdlet.ShouldProcess("console", "Outputting object")) {
                $db.Refresh()

                [PSCustomObject]@{
                    ComputerName          = $server.ComputerName
                    InstanceName          = $server.ServiceName
                    SqlInstance           = $server.DomainInstanceName
                    Database              = $db.name
                    OriginalCompatibility = $ogcompat.ToString().Replace('Version', '')
                    CurrentCompatibility  = $db.CompatibilityLevel.ToString().Replace('Version', '')
                    Compatibility         = $comResult
                    DataPurity            = $DataPurityResult
                    UpdateUsage           = $UpdateUsageResult
                    UpdateStats           = $UpdateStatsResult
                    RefreshViews          = $RefreshViewResult
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Invoke-DbaDatabaseUpgrade
    }
}

tools\dbatools\functions\Invoke-DbaDiagnosticQuery.ps1

function Invoke-DbaDiagnosticQuery {
    <#
    .SYNOPSIS
        Invoke-DbaDiagnosticQuery runs the scripts provided by Glenn Berry's DMV scripts on specified servers

    .DESCRIPTION
        This is the main function of the Sql Server Diagnostic Queries related functions in dbatools.
        The diagnostic queries are developed and maintained by Glenn Berry and they can be found here along with a lot of documentation:
        http://www.sqlskills.com/blogs/glenn/category/dmv-queries/

        The most recent version of the diagnostic queries are included in the dbatools module.
        But it is possible to download a newer set or a specific version to an alternative location and parse and run those scripts.
        It will run all or a selection of those scripts on one or multiple servers and return the result as a PowerShell Object

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. Can be either a string or SMO server

    .PARAMETER SqlCredential
        Allows alternative Windows or SQL login credentials to be used

    .PARAMETER Path
        Alternate path for the diagnostic scripts

    .PARAMETER Database
        The database(s) to process. If unspecified, all databases will be processed

    .PARAMETER ExcludeDatabase
        The database(s) to exclude

    .PARAMETER ExcludeQuery
        The Queries to exclude

    .PARAMETER UseSelectionHelper
        Provides a gridview with all the queries to choose from and will run the selection made by the user on the Sql Server instance specified.

    .PARAMETER QueryName
        Only run specific query

    .PARAMETER InstanceOnly
        Run only instance level queries

    .PARAMETER DatabaseSpecific
        Run only database level queries

    .PARAMETER ExcludeQueryTextColumn
        Use this switch to exclude the [Complete Query Text] column from relevant queries

    .PARAMETER ExcludePlanColumn
        Use this switch to exclude the [Query Plan] column from relevant queries

    .PARAMETER NoColumnParsing
        Does not parse the [Complete Query Text] and [Query Plan] columns and disregards the ExcludeQueryTextColumn and NoColumnParsing switches

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER Confirm
        Prompts to confirm certain actions

    .PARAMETER WhatIf
        Shows what would happen if the command would execute, but does not actually perform the command

    .PARAMETER OutputPath
        Directory to parsed diagnostict queries to. This will split them based on server, databasename, and query.

    .PARAMETER ExportQueries
        Use this switch to export the diagnostic queries to sql files. I
        nstead of running the queries, the server will be evaluated to find the appropriate queries to run based on SQL Version.
        These sql files will then be created in the OutputDirectory

    .NOTES
        Tags: Database, DMV
        Author: Andre Kamman (@AndreKamman), http://clouddba.io

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Invoke-DbaDiagnosticQuery

    .EXAMPLE
        PS C:\>Invoke-DbaDiagnosticQuery -SqlInstance sql2016

        Run the selection made by the user on the Sql Server instance specified.

    .EXAMPLE
        PS C:\>Invoke-DbaDiagnosticQuery -SqlInstance sql2016 -UseSelectionHelper | Export-DbaDiagnosticQuery -Path C:\temp\gboutput

        Provides a gridview with all the queries to choose from and will run the selection made by the user on the SQL Server instance specified.
        Then it will export the results to Export-DbaDiagnosticQuery.

    .EXAMPLE
        PS C:\> Invoke-DbaDiagnosticQuery -sqlinstance localhost -ExportQueries -outputpath "C:\temp\DiagnosticQueries"

        Export All Queries to Disk

    .EXAMPLE
        PS C:\> Invoke-DbaDiagnosticQuery -sqlinstance localhost -DatabaseSpecific -DatabaseName 'tempdb' -ExportQueries -outputpath "C:\temp\DiagnosticQueries"

        Export Database Specific Queries for all User Dbs

    .EXAMPLE
        PS C:\> Invoke-DbaDiagnosticQuery -sqlinstance localhost -DatabaseSpecific -DatabaseName 'tempdb' -ExportQueries -outputpath "C:\temp\DiagnosticQueries"

        Export Database Specific Queries For One Target Database

    .EXAMPLE
        PS C:\> Invoke-DbaDiagnosticQuery -sqlinstance localhost -DatabaseSpecific -DatabaseName 'tempdb' -ExportQueries -outputpath "C:\temp\DiagnosticQueries" -queryname 'Database-scoped Configurations'

        Export Database Specific Queries For One Target Database and One Specific Query

    .EXAMPLE
        PS C:\> Invoke-DbaDiagnosticQuery -sqlinstance localhost -UseSelectionHelper

        Choose Queries To Export

    .EXAMPLE
        PS C:\> [PSObject[]]$results = Invoke-DbaDiagnosticQuery -SqlInstance localhost -whatif

        Parse the appropriate diagnostic queries by connecting to server, and instead of running them, return as [PSCustomObject[]] to work with further

    .EXAMPLE
        PS C:\> $results = Invoke-DbaDiagnosticQuery -SqlInstance Sql2017 -DatabaseSpecific -queryname 'Database-scoped Configurations' -databasename TestStuff

        Run diagnostic queries targeted at specific database, and only run database level queries against this database.

    #>

    [CmdletBinding(SupportsShouldProcess)]
    [outputtype([pscustomobject[]])]
    param (
        [parameter(Mandatory, ValueFromPipeline, Position = 0)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,

        [Alias('DatabaseName')]
        [object[]]$Database,

        [object[]]$ExcludeDatabase,

        [object[]]$ExcludeQuery,

        [Alias('Credential')]
        [PSCredential]$SqlCredential,
        [System.IO.FileInfo]$Path,
        [string[]]$QueryName,
        [switch]$UseSelectionHelper,
        [switch]$InstanceOnly,
        [switch]$DatabaseSpecific,
        [Switch]$ExcludeQueryTextColumn,
        [Switch]$ExcludePlanColumn,
        [Switch]$NoColumnParsing,

        [string]$OutputPath,
        [switch]$ExportQueries,

        [switch][Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        $ProgressId = Get-Random

        function Invoke-DiagnosticQuerySelectionHelper {
            [CmdletBinding()]
            param (
                [parameter(Mandatory)]
                $ParsedScript
            )

            $ParsedScript | Select-Object QueryNr, QueryName, DBSpecific, Description | Out-GridView -Title "Diagnostic Query Overview" -OutputMode Multiple | Sort-Object QueryNr | Select-Object -ExpandProperty QueryName

        }

        Write-Message -Level Verbose -Message "Interpreting DMV Script Collections"

        $module = Get-Module -Name dbatools
        $base = $module.ModuleBase

        if (!$Path) {
            $Path = "$base\bin\diagnosticquery"
        }

        $scriptversions = @()
        $scriptfiles = Get-ChildItem "$Path\SQLServerDiagnosticQueries_*_*.sql"

        if (!$scriptfiles) {
            Write-Message -Level Warning -Message "Diagnostic scripts not found in $Path. Using the ones within the module."

            $Path = "$base\bin\diagnosticquery"

            $scriptfiles = Get-ChildItem "$base\bin\diagnosticquery\SQLServerDiagnosticQueries_*_*.sql"
            if (!$scriptfiles) {
                Stop-Function -Message "Unable to download scripts, do you have an internet connection? $_" -ErrorRecord $_
                return
            }
        }

        [int[]]$filesort = $null

        foreach ($file in $scriptfiles) {
            $filesort += $file.BaseName.Split("_")[2]
        }

        $currentdate = $filesort | Sort-Object -Descending | Select-Object -First 1

        foreach ($file in $scriptfiles) {
            if ($file.BaseName.Split("_")[2] -eq $currentdate) {
                $parsedscript = Invoke-DbaDiagnosticQueryScriptParser -filename $file.fullname -ExcludeQueryTextColumn:$ExcludeQueryTextColumn -ExcludePlanColumn:$ExcludePlanColumn -NoColumnParsing:$NoColumnParsing

                $newscript = [pscustomobject]@{
                    Version = $file.Basename.Split("_")[1]
                    Script  = $parsedscript
                }
                $scriptversions += $newscript
            }
        }
    }

    process {
        if (Test-FunctionInterrupt) { return }

        foreach ($instance in $SqlInstance) {
            $counter = 0
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            Write-Message -Level Verbose -Message "Collecting diagnostic query data from server: $instance"

            if ($server.VersionMinor -eq 50) {
                $version = "2008R2"
            } else {
                $version = switch ($server.VersionMajor) {
                    9 { "2005" }
                    10 { "2008" }
                    11 { "2012" }
                    12 { "2014" }
                    13 { "2016" }
                    14 { "2017" }
                }
            }

            if ($version -eq "2016" -and $server.VersionMinor -gt 5026 ) {
                $version = "2016SP2"
            }

            if ($server.DatabaseEngineType -eq "SqlAzureDatabase") {
                $version = "AzureSQLDatabase"
            }

            if (!$instanceOnly) {
                if (-not $Database) {
                    $databases = (Get-DbaDatabase -SqlInstance $server -ExcludeSystem -ExcludeDatabase $ExcludeDatabase).Name
                } else {
                    $databases = (Get-DbaDatabase -SqlInstance $server -ExcludeSystem -Database $Database -ExcludeDatabase $ExcludeDatabase).Name
                }
            }

            $parsedscript = $scriptversions | Where-Object -Property Version -eq $version | Select-Object -ExpandProperty Script

            if ($null -eq $first) { $first = $true }
            if ($UseSelectionHelper -and $first) {
                $QueryName = Invoke-DiagnosticQuerySelectionHelper $parsedscript
                $first = $false
                if ($QueryName.Count -eq 0) {
                    Write-Message -Level Output -Message "No query selected through SelectionHelper, halting script execution"
                    return
                }
            }

            if ($QueryName.Count -eq 0) {
                $QueryName = $parsedscript | Select-Object -ExpandProperty QueryName
            }

            if ($ExcludeQuery) {
                $QueryName = Compare-Object -ReferenceObject $QueryName -DifferenceObject $ExcludeQuery | Where-Object SideIndicator -eq "<=" | Select-Object -ExpandProperty InputObject
            }

            #since some database level queries can take longer (such as fragmentation) calculate progress with database specific queries * count of databases to run against into context
            $CountOfDatabases = ($databases).Count

            if ($QueryName.Count -ne 0) {
                #if running all queries, then calculate total to run by instance queries count + (db specific count * databases to run each against)
                $countDBSpecific = @($parsedscript | Where-Object {$_.QueryName -in $QueryName -and $_.DBSpecific -eq $true}).Count
                $countInstanceSpecific = @($parsedscript | Where-Object {$_.QueryName -in $QueryName -and $_.DBSpecific -eq $false}).Count
            } else {
                #if narrowing queries to database specific, calculate total to process based on instance queries count + (db specific count * databases to run each against)
                $countDBSpecific = @($parsedscript | Where-Object DBSpecific).Count
                $countInstanceSpecific = @($parsedscript | Where-Object DBSpecific -eq $false).Count

            }
            if (!$instanceonly -and !$DatabaseSpecific -and !$QueryName) {
                $scriptcount = $countInstanceSpecific + ($countDBSpecific * $CountOfDatabases )
            } elseif ($instanceOnly) {
                $scriptcount = $countInstanceSpecific
            } elseif ($DatabaseSpecific) {
                $scriptcount = $countDBSpecific * $CountOfDatabases
            } elseif ($QueryName.Count -ne 0) {
                $scriptcount = $countInstanceSpecific + ($countDBSpecific * $CountOfDatabases )


            }
            
            foreach ($scriptpart in $parsedscript) {
                # ensure results are null with each part, otherwise duplicated information may be returned
                $result = $null
                if (($QueryName.Count -ne 0) -and ($QueryName -notcontains $scriptpart.QueryName)) { continue }
                if (!$scriptpart.DBSpecific -and !$DatabaseSpecific) {
                    if ($ExportQueries) {
                        $null = New-Item -Path $OutputPath -ItemType Directory -Force
                        $FileName = Remove-InvalidFileNameChars ('{0}.sql' -f $Scriptpart.QueryName)
                        $FullName = Join-Path $OutputPath $FileName
                        Write-Message -Level Verbose -Message  "Creating file: $FullName"
                        $scriptPart.Text | out-file -FilePath $FullName -Encoding UTF8 -force
                        continue
                    }

                    if ($PSCmdlet.ShouldProcess($instance, $scriptpart.QueryName)) {

                        if (-not $EnableException) {
                            $Counter++
                            Write-Progress -Id $ProgressId -ParentId 0 -Activity "Collecting diagnostic query data from $instance" -Status "Processing $counter of $scriptcount" -CurrentOperation $scriptpart.QueryName -PercentComplete (($counter / $scriptcount) * 100)
                        }

                        try {
                            $result = $server.Query($scriptpart.Text)
                            Write-Message -Level Verbose -Message "Processed $($scriptpart.QueryName) on $instance"
                            if (-not $result) {
                                [pscustomobject]@{
                                    ComputerName     = $server.ComputerName
                                    InstanceName     = $server.ServiceName
                                    SqlInstance      = $server.DomainInstanceName
                                    Number           = $scriptpart.QueryNr
                                    Name             = $scriptpart.QueryName
                                    Description      = $scriptpart.Description
                                    DatabaseSpecific = $scriptpart.DBSpecific
                                    Database         = $null
                                    Notes            = "Empty Result for this Query"
                                    Result           = $null
                                }
                                Write-Message -Level Verbose -Message ("Empty result for Query {0} - {1} - {2}" -f $scriptpart.QueryNr, $scriptpart.QueryName, $scriptpart.Description)
                            }
                        } catch {
                            Write-Message -Level Verbose -Message ('Some error has occured on Server: {0} - Script: {1}, result unavailable' -f $instance, $scriptpart.QueryName) -Target $instance -ErrorRecord $_
                        }
                        if ($result) {
                            [pscustomobject]@{
                                ComputerName     = $server.ComputerName
                                InstanceName     = $server.ServiceName
                                SqlInstance      = $server.DomainInstanceName
                                Number           = $scriptpart.QueryNr
                                Name             = $scriptpart.QueryName
                                Description      = $scriptpart.Description
                                DatabaseSpecific = $scriptpart.DBSpecific
                                Database         = $null
                                Notes            = $null
                                #Result           = Select-DefaultView -InputObject $result -Property *
                                #Not using Select-DefaultView because excluding the fields below doesn't seem to work
                                Result           = $result | Select-Object * -ExcludeProperty 'Item', 'RowError', 'RowState', 'Table', 'ItemArray', 'HasErrors'
                            }

                        }
                    } else {
                        # if running WhatIf, then return the queries that would be run as an object, not just whatif output

                        [pscustomobject]@{
                            ComputerName     = $server.ComputerName
                            InstanceName     = $server.ServiceName
                            SqlInstance      = $server.DomainInstanceName
                            Number           = $scriptpart.QueryNr
                            Name             = $scriptpart.QueryName
                            Description      = $scriptpart.Description
                            DatabaseSpecific = $scriptpart.DBSpecific
                            Database         = $null
                            Notes            = "WhatIf - Bypassed Execution"
                            Result           = $null
                        }
                    }

                } elseif ($scriptpart.DBSpecific -and !$instanceOnly) {

                    foreach ($currentdb in $databases) {
                        if ($ExportQueries) {
                            $null = New-Item -Path $OutputPath -ItemType Directory -Force
                            $FileName = Remove-InvalidFileNameChars ('{0}-{1}-{2}.sql' -f $server.DomainInstanceName, $currentDb, $Scriptpart.QueryName)
                            $FullName = Join-Path $OutputPath $FileName
                            Write-Message -Level Verbose -Message  "Creating file: $FullName"
                            $scriptPart.Text | out-file -FilePath $FullName -encoding UTF8 -force
                            continue
                        }


                        if ($PSCmdlet.ShouldProcess(('{0} ({1})' -f $instance, $currentDb), $scriptpart.QueryName)) {

                            if (-not $EnableException) {
                                $Counter++
                                Write-Progress -Id $ProgressId -ParentId 0 -Activity "Collecting diagnostic query data from $($currentDb) on $instance" -Status ('Processing {0} of {1}' -f $counter, $scriptcount) -CurrentOperation $scriptpart.QueryName -PercentComplete (($Counter / $scriptcount) * 100)
                            }

                            Write-Message -Level Verbose -Message "Collecting diagnostic query data from $($currentDb) for $($scriptpart.QueryName) on $instance"
                            try {
                                $result = $server.Query($scriptpart.Text, $currentDb)
                                if (-not $result) {
                                    [pscustomobject]@{
                                        ComputerName     = $server.ComputerName
                                        InstanceName     = $server.ServiceName
                                        SqlInstance      = $server.DomainInstanceName
                                        Number           = $scriptpart.QueryNr
                                        Name             = $scriptpart.QueryName
                                        Description      = $scriptpart.Description
                                        DatabaseSpecific = $scriptpart.DBSpecific
                                        Database         = $currentdb
                                        Notes            = "Empty Result for this Query"
                                        Result           = $null
                                    }
                                    Write-Message -Level Verbose -Message ("Empty result for Query {0} - {1} - {2}" -f $scriptpart.QueryNr, $scriptpart.QueryName, $scriptpart.Description) -Target $scriptpart -ErrorRecord $_
                                }
                            } catch {
                                Write-Message -Level Verbose -Message ('Some error has occured on Server: {0} - Script: {1} - Database: {2}, result will not be saved' -f $instance, $scriptpart.QueryName, $currentDb) -Target $currentdb -ErrorRecord $_
                            }

                            if ($result) {
                                [pscustomobject]@{
                                    ComputerName     = $server.ComputerName
                                    InstanceName     = $server.ServiceName
                                    SqlInstance      = $server.DomainInstanceName
                                    Number           = $scriptpart.QueryNr
                                    Name             = $scriptpart.QueryName
                                    Description      = $scriptpart.Description
                                    DatabaseSpecific = $scriptpart.DBSpecific
                                    Database         = $currentDb
                                    Notes            = $null
                                    #Result           = Select-DefaultView -InputObject $result -Property *
                                    #Not using Select-DefaultView because excluding the fields below doesn't seem to work
                                    Result           = $result | Select-Object * -ExcludeProperty 'Item', 'RowError', 'RowState', 'Table', 'ItemArray', 'HasErrors'
                                }
                            }
                        } else {
                            # if running WhatIf, then return the queries that would be run as an object, not just whatif output

                            [pscustomobject]@{
                                ComputerName     = $server.ComputerName
                                InstanceName     = $server.ServiceName
                                SqlInstance      = $server.DomainInstanceName
                                Number           = $scriptpart.QueryNr
                                Name             = $scriptpart.QueryName
                                Description      = $scriptpart.Description
                                DatabaseSpecific = $scriptpart.DBSpecific
                                Database         = $null
                                Notes            = "WhatIf - Bypassed Execution"
                                Result           = $null
                            }
                        }
                    }
                }
            }
        }
    }
    end {
        Write-Progress -Id $ProgressId -Activity 'Invoke-DbaDiagnosticQuery' -Completed
    }
}

tools\dbatools\functions\Get-DbaXESmartTarget.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaXESmartTarget {
    <#
    .SYNOPSIS
        Gets an XESmartTarget PowerShell job created by Start-DbaXESmartTarget.

    .DESCRIPTION
        Gets an XESmartTarget PowerShell job created by Start-DbaXESmartTarget.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: ExtendedEvent, XE, XEvent
        Author: Chrissy LeMaire (@cl) | SmartTarget by Gianluca Sartori (@spaghettidba)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaXESmartTarget

    .EXAMPLE
        PS C:\> Get-DbaXESmartTarget

        Gets an XESmartTarget PowerShell Job created by Start-DbaXESmartTarget.

    #>
    [CmdletBinding()]
    param (
        [switch]$EnableException
    )
    process {
        try {
            Get-Job | Where-Object Name -Match SmartTarget | Select-Object -Property ID, Name, State
        } catch {
            Stop-Function -Message "Failure" -ErrorRecord $_
        }
    }
}

tools\dbatools\functions\Get-DbaXEStore.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Get-DbaXEStore {
    <#
    .SYNOPSIS
        Get a Extended Events store

    .DESCRIPTION
        Get a Extended Events store

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2008 or higher.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: ExtendedEvent, XE, XEvent
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaXEStore

    .EXAMPLE
        PS C:\> Get-DbaXEStore -SqlInstance ServerA\sql987

        Returns an XEvent Store.

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 11
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $SqlConn = $server.ConnectionContext.SqlConnectionObject
            $SqlStoreConnection = New-Object Microsoft.SqlServer.Management.Sdk.Sfc.SqlStoreConnection $SqlConn
            $store = New-Object  Microsoft.SqlServer.Management.XEvent.XEStore $SqlStoreConnection

            Add-Member -Force -InputObject $store -MemberType NoteProperty -Name ComputerName -Value $server.ComputerName
            Add-Member -Force -InputObject $store -MemberType NoteProperty -Name InstanceName -Value $server.ServiceName
            Add-Member -Force -InputObject $store -MemberType NoteProperty -Name SqlInstance -Value $server.DomainInstanceName
            Select-DefaultView -InputObject $store -Property ComputerName, InstanceName, SqlInstance, ServerName, Sessions, Packages, RunningSessionCount
        }
    }
}

tools\dbatools\functions\Invoke-DbaPfRelog.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Invoke-DbaPfRelog {
    <#
    .SYNOPSIS
        Pipeline-compatible wrapper for the relog command which is available on modern Windows platforms.

    .DESCRIPTION
        Pipeline-compatible wrapper for the relog command. Relog is useful for converting Windows Perfmon.

        Extracts performance counters from performance counter logs into other formats,
        such as text-TSV (for tab-delimited text), text-CSV (for comma-delimited text), binary-BIN, or SQL.

        `relog "C:\PerfLogs\Admin\System Correlation\WORKSTATIONX_20180112-000001\DataCollector01.blg" -o C:\temp\foo.csv -f tsv`

        If you find any input hangs, please send us the output so we can accommodate for it then use -Raw for an immediate solution.

    .PARAMETER Path
        Specifies the pathname of an existing performance counter log or performance counter path. You can specify multiple input files.

    .PARAMETER Destination
        Specifies the pathname of the output file or SQL database where the counters will be written. Defaults to the same directory as the source.

    .PARAMETER Type
        The output format. Defaults to tsv. Options include tsv, csv, bin, and sql.

        For a SQL database, the output file specifies the DSN!counter_log. You can specify the database location by using the ODBC manager to configure the DSN (Database System Name).

        For more information, read here: https://technet.microsoft.com/en-us/library/bb490958.aspx

    .PARAMETER Append
        If this switch is enabled, output will be appended to the specified file instead of overwriting. This option does not apply to SQL format where the default is always to append.

    .PARAMETER AllowClobber
        If this switch is enabled, the destination file will be overwritten if it exists.

    .PARAMETER PerformanceCounter
        Specifies the performance counter path to log.

    .PARAMETER PerformanceCounterPath
        Specifies the pathname of the text file that lists the performance counters to be included in a relog file. Use this option to list counter paths in an input file, one per line. Default setting is all counters in the original log file are relogged.

    .PARAMETER Interval
        Specifies sample intervals in "n" records. Includes every nth data point in the relog file. Default is every data point.

    .PARAMETER BeginTime
        This is is Get-Date object and we format it for you.

    .PARAMETER EndTime
        Specifies end time for copying last record from the input file. This is is Get-Date object and we format it for you.

    .PARAMETER ConfigPath
        Specifies the pathname of the settings file that contains command-line parameters.

    .PARAMETER Summary
        If this switch is enabled, the performance counters and time ranges of log files specified in the input file will be displayed.

    .PARAMETER Multithread
        If this switch is enabled, processing will be done in parallel. This may speed up large batches or large files.

    .PARAMETER AllTime
        If this switch is enabled and a datacollector or datacollectorset is passed in via the pipeline, collects all logs, not just the latest.

    .PARAMETER Raw
        If this switch is enabled, the results of the DOS command instead of Get-ChildItem will be displayed. This does not run in parallel.

    .PARAMETER InputObject
        Accepts the output of Get-DbaPfDataCollector and Get-DbaPfDataCollectorSet as input via the pipeline.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Performance, DataCollector, PerfCounter, Relog
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Invoke-DbaPfRelog

    .EXAMPLE
        PS C:\> Invoke-DbaPfRelog -Path C:\temp\perfmon.blg

        Creates C:\temp\perfmon.tsv from C:\temp\perfmon.blg.

    .EXAMPLE
        PS C:\> Invoke-DbaPfRelog -Path C:\temp\perfmon.blg -Destination C:\temp\a\b\c

        Creates the temp, a, and b directories if needed, then generates c.tsv (tab separated) from C:\temp\perfmon.blg.

        Returns the newly created file as a file object.

    .EXAMPLE
        PS C:\> Get-DbaPfDataCollectorSet -ComputerName sql2016 | Get-DbaPfDataCollector | Invoke-DbaPfRelog -Destination C:\temp\perf

        Creates C:\temp\perf if needed, then generates computername-datacollectorname.tsv (tab separated) from the latest logs of all data collector sets on sql2016. This destination format was chosen to avoid naming conflicts with piped input.

    .EXAMPLE
        PS C:\> Invoke-DbaPfRelog -Path C:\temp\perfmon.blg -Destination C:\temp\a\b\c -Raw
        ```
        [Invoke-DbaPfRelog][21:21:35] relog "C:\temp\perfmon.blg" -f csv -o C:\temp\a\b\c

        Input
        ----------------
        File(s):
        C:\temp\perfmon.blg (Binary)

        Begin:    1/13/2018 5:13:23
        End:      1/13/2018 14:29:55
        Samples:  2227

        100.00%

        Output
        ----------------
        File:     C:\temp\a\b\c.csv

        Begin:    1/13/2018 5:13:23
        End:      1/13/2018 14:29:55
        Samples:  2227

        The command completed successfully.
        ```

        Creates the temp, a, and b directories if needed, then generates c.tsv (tab separated) from C:\temp\perfmon.blg then outputs the raw results of the relog command.

    .EXAMPLE
        PS C:\> Invoke-DbaPfRelog -Path 'C:\temp\perflog with spaces.blg' -Destination C:\temp\a\b\c -Type csv -BeginTime ((Get-Date).AddDays(-30)) -EndTime ((Get-Date).AddDays(-1))

        Creates the temp, a, and b directories if needed, then generates c.csv (comma separated) from C:\temp\perflog with spaces.blg', starts 30 days ago and ends one day ago.

    .EXAMPLE
        PS C:\> $servers | Get-DbaPfDataCollectorSet | Get-DbaPfDataCollector | Invoke-DbaPfRelog -Multithread -AllowClobber

        Relogs latest data files from all collectors within the servers listed in $servers.

    .EXAMPLE
        PS C:\> Get-DbaPfDataCollector -Collector DataCollector01 | Invoke-DbaPfRelog -AllowClobber -AllTime

        Relogs all the log files from the DataCollector01 on the local computer and allows overwrite.

    #>
    [CmdletBinding()]
    param (
        [parameter(ValueFromPipelineByPropertyName)]
        [Alias("FullName")]
        [string[]]$Path,
        [string]$Destination,
        [ValidateSet("tsv", "csv", "bin", "sql")]
        [string]$Type = "tsv",
        [switch]$Append,
        [switch]$AllowClobber,
        [string[]]$PerformanceCounter,
        [string]$PerformanceCounterPath,
        [int]$Interval,
        [datetime]$BeginTime,
        [datetime]$EndTime,
        [string]$ConfigPath,
        [switch]$Summary,
        [parameter(ValueFromPipeline)]
        [object[]]$InputObject,
        [switch]$Multithread,
        [switch]$AllTime,
        [switch]$Raw,
        [switch]$EnableException
    )
    begin {
        
        
        if (Test-Bound -ParameterName BeginTime) {
            $script:beginstring = ($BeginTime -f 'M/d/yyyy hh:mm:ss' | Out-String).Trim()
        }
        if (Test-Bound -ParameterName EndTime) {
            $script:endstring = ($EndTime -f 'M/d/yyyy hh:mm:ss' | Out-String).Trim()
        }

        $allpaths = @()
        $allpaths += $Path

        # to support multithreading
        if (Test-Bound -ParameterName Destination) {
            $script:destinationset = $true
            $originaldestination = $Destination
        } else {
            $script:destinationset = $false
        }
    }
    process {
        if ($Append -and $Type -ne "bin") {
            Stop-Function -Message "Append can only be used with -Type bin." -Target $Path
            return
        }

        if ($InputObject) {
            foreach ($object in $InputObject) {
                # DataCollectorSet
                if ($object.OutputLocation -and $object.RemoteOutputLocation) {
                    $instance = [dbainstance]$object.ComputerName

                    if (-not $AllTime) {
                        if ($instance.IsLocalHost) {
                            $allpaths += (Get-ChildItem -Recurse -Path $object.LatestOutputLocation -Include *.blg -ErrorAction SilentlyContinue).FullName
                        } else {
                            $allpaths += (Get-ChildItem -Recurse -Path $object.RemoteLatestOutputLocation -Include *.blg -ErrorAction SilentlyContinue).FullName
                        }
                    } else {
                        if ($instance.IsLocalHost) {
                            $allpaths += (Get-ChildItem -Recurse -Path $object.OutputLocation -Include *.blg -ErrorAction SilentlyContinue).FullName
                        } else {
                            $allpaths += (Get-ChildItem -Recurse -Path $object.RemoteOutputLocation -Include *.blg -ErrorAction SilentlyContinue).FullName
                        }
                    }


                    $script:perfmonobject = $true
                }
                # DataCollector
                if ($object.LatestOutputLocation -and $object.RemoteLatestOutputLocation) {
                    $instance = [dbainstance]$object.ComputerName

                    if (-not $AllTime) {
                        if ($instance.IsLocalHost) {
                            $allpaths += (Get-ChildItem -Recurse -Path $object.LatestOutputLocation -Include *.blg -ErrorAction SilentlyContinue).FullName
                        } else {
                            $allpaths += (Get-ChildItem -Recurse -Path $object.RemoteLatestOutputLocation -Include *.blg -ErrorAction SilentlyContinue).FullName
                        }
                    } else {
                        if ($instance.IsLocalHost) {
                            $allpaths += (Get-ChildItem -Recurse -Path (Split-Path $object.LatestOutputLocation) -Include *.blg -ErrorAction SilentlyContinue).FullName
                        } else {
                            $allpaths += (Get-ChildItem -Recurse -Path (Split-Path $object.RemoteLatestOutputLocation) -Include *.blg -ErrorAction SilentlyContinue).FullName
                        }
                    }
                    $script:perfmonobject = $true
                }
            }
        }
    }

    # Gotta collect all the paths first then process them otherwise there may be duplicates
    end {
        $allpaths = $allpaths | Where-Object { $_ -match '.blg' } | Select-Object -Unique

        if (-not $allpaths) {
            Stop-Function -Message "Could not find matching .blg files" -Target $file -Continue
            return
        }

        $scriptblock = {
            if ($args) {
                $file = $args
            } else {
                $file = $psitem
            }
            $item = Get-ChildItem -Path $file -ErrorAction SilentlyContinue

            if ($null -eq $item) {
                Stop-Function -Message "$file does not exist." -Target $file -Continue
                return
            }

            if (-not $script:destinationset -and $file -match "C\:\\.*Admin.*") {
                $null = Test-ElevationRequirement -ComputerName $env:COMPUTERNAME -Continue
            }

            if ($script:destinationset -eq $false -and -not $Append) {
                $Destination = Join-Path (Split-Path $file) $item.BaseName
            }

            if ($Destination -and $Destination -notmatch "\." -and -not $Append -and $script:perfmonobject) {
                # if destination is set, then it needs a different name
                if ($script:destinationset -eq $true) {
                    if ($file -match "\:") {
                        $computer = $env:COMPUTERNAME
                    } else {
                        $computer = $file.Split("\")[2]
                    }
                    # Avoid naming conflicts
                    $timestamp = Get-Date -format yyyyMMddHHmmfff
                    $Destination = Join-Path $originaldestination "$computer - $($item.BaseName) - $timestamp"
                }
            }

            $params = @("`"$file`"")

            if ($Append) {
                $params += "-a"
            }

            if ($PerformanceCounter) {
                $parsedcounters = $PerformanceCounter -join " "
                $params += "-c `"$parsedcounters`""
            }

            if ($PerformanceCounterPath) {
                $params += "-cf `"$PerformanceCounterPath`""
            }

            $params += "-f $Type"

            if ($Interval) {
                $params += "-t $Interval"
            }

            if ($Destination) {
                $params += "-o `"$Destination`""
            }

            if ($script:beginstring) {
                $params += "-b $script:beginstring"
            }

            if ($script:endstring) {
                $params += "-e $script:endstring"
            }

            if ($ConfigPath) {
                $params += "-config $ConfigPath"
            }

            if ($Summary) {
                $params += "-q"
            }


            if (-not ($Destination.StartsWith("DSN"))) {
                $outputisfile = $true
            } else {
                $outputisfile = $false
            }

            if ($outputisfile) {
                if ($Destination) {
                    $dir = Split-Path $Destination
                    if (-not (Test-Path -Path $dir)) {
                        try {
                            $null = New-Item -ItemType Directory -Path $dir -ErrorAction Stop
                        } catch {
                            Stop-Function -Message "Failure" -ErrorRecord $_ -Target $Destination -Continue
                        }
                    }

                    if ((Test-Path $Destination) -and -not $Append -and ((Get-Item $Destination) -isnot [System.IO.DirectoryInfo])) {
                        if ($AllowClobber) {
                            try {
                                Remove-Item -Path "$Destination" -ErrorAction Stop
                            } catch {
                                Stop-Function -Message "Failure" -ErrorRecord $_ -Continue
                            }
                        } else {
                            if ($Type -eq "bin") {
                                Stop-Function -Message "$Destination exists. Use -AllowClobber to overwrite or -Append to append." -Continue
                            } else {
                                Stop-Function -Message "$Destination exists. Use -AllowClobber to overwrite." -Continue
                            }
                        }
                    }

                    if ((Test-Path "$Destination.$type") -and -not $Append) {
                        if ($AllowClobber) {
                            try {
                                Remove-Item -Path "$Destination.$type" -ErrorAction Stop
                            } catch {
                                Stop-Function -Message "Failure" -ErrorRecord $_ -Continue
                            }
                        } else {
                            if ($Type -eq "bin") {
                                Stop-Function -Message "$("$Destination.$type") exists. Use -AllowClobber to overwrite or -Append to append." -Continue
                            } else {
                                Stop-Function -Message "$("$Destination.$type") exists. Use -AllowClobber to overwrite." -Continue
                            }
                        }
                    }
                }
            }

            $arguments = ($params -join " ")

            try {
                if ($Raw) {
                    Write-Message -Level Output -Message "relog $arguments"
                    cmd /c "relog $arguments"
                } else {
                    Write-Message -Level Verbose -Message "relog $arguments"
                    $scriptblock = {
                        $output = (cmd /c "relog $arguments" | Out-String).Trim()

                        if ($output -notmatch "Success") {
                            Stop-Function -Continue -Message $output.Trim("Input")
                        } else {
                            Write-Message -Level Verbose -Message "$output"
                            $array = $output -Split [environment]::NewLine
                            $files = $array | Select-String "File:"

                            foreach ($rawfile in $files) {
                                $rawfile = $rawfile.ToString().Replace("File:", "").Trim()
                                $gcierror = $null
                                Get-ChildItem $rawfile -ErrorAction SilentlyContinue -ErrorVariable gcierror | Add-Member -MemberType NoteProperty -Name RelogFile -Value $true -PassThru -ErrorAction Ignore
                                if ($gcierror) {
                                    Write-Message -Level Verbose -Message "$gcierror"
                                }
                            }
                        }
                    }
                    Invoke-Command -ScriptBlock $scriptblock
                }
            } catch {
                Stop-Function -Message "Failure" -ErrorRecord $_ -Target $path
            }
        }

        if ($Multithread) {
            $allpaths | Invoke-Parallel -ImportVariables -ImportModules -ScriptBlock $scriptblock -ErrorAction SilentlyContinue -ErrorVariable parallelerror
            if ($parallelerror) {
                Write-Message -Level Verbose -Message "$parallelerror"
            }
        } else {
            foreach ($file in $allpaths) { Invoke-Command -ScriptBlock $scriptblock -ArgumentList $file }
        }
    }
}

tools\dbatools\functions\Invoke-DbaQuery.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Invoke-DbaQuery {
    <#
    .SYNOPSIS
        A command to run explicit T-SQL commands or files.

    .DESCRIPTION
        This function is a wrapper command around Invoke-DbaAsync, which in turn is based on Invoke-SqlCmd2.
        It was designed to be more convenient to use in a pipeline and to behave in a way consistent with the rest of our functions.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Credential object used to connect to the SQL Server Instance as a different user. This can be a Windows or SQL Server account. Windows users are determined by the existence of a backslash, so if you are intending to use an alternative Windows connection instead of a SQL login, ensure it contains a backslash.

    .PARAMETER Database
        The database to select before running the query. This list is auto-populated from the server.

    .PARAMETER Query
        Specifies one or more queries to be run. The queries can be Transact-SQL, XQuery statements, or sqlcmd commands. Multiple queries in a single batch may be separated by a semicolon or a GO

        Escape any double quotation marks included in the string.

        Consider using bracketed identifiers such as [MyTable] instead of quoted identifiers such as "MyTable".

    .PARAMETER QueryTimeout
        Specifies the number of seconds before the queries time out.

    .PARAMETER File
        Specifies the path to one or several files to be used as the query input.

    .PARAMETER SqlObject
        Specify on or multiple SQL objects. Those will be converted to script and their scripts run on the target system(s).

    .PARAMETER As
        Specifies output type. Valid options for this parameter are 'DataSet', 'DataTable', 'DataRow', 'PSObject', and 'SingleValue'

        PSObject output introduces overhead but adds flexibility for working with results: http://powershell.org/wp/forums/topic/dealing-with-dbnull/

    .PARAMETER SqlParameters
        Specifies a hashtable of parameters for parameterized SQL queries.  http://blog.codinghorror.com/give-me-parameterized-sql-or-give-me-death/

    .PARAMETER AppendServerInstance
        If this switch is enabled, the SQL Server instance will be appended to PSObject and DataRow output.

    .PARAMETER MessagesToOutput
        Use this switch to have on the output stream messages too (e.g. PRINT statements). Output will hold the resultset too. See examples for detail

    .PARAMETER InputObject
        A collection of databases (such as returned by Get-DbaDatabase)

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Database, Query
        Author: Friedrich Weinmann (@FredWeinmann)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Invoke-DbaQuery

    .EXAMPLE
        PS C:\> Invoke-DbaQuery -SqlInstance server\instance -Query 'SELECT foo FROM bar'

        Runs the sql query 'SELECT foo FROM bar' against the instance 'server\instance'

    .EXAMPLE
        PS C:\> Get-DbaCmsRegServer -SqlInstance [SERVERNAME] -Group [GROUPNAME] | Invoke-DbaQuery -Query 'SELECT foo FROM bar'

        Runs the sql query 'SELECT foo FROM bar' against all instances in the group [GROUPNAME] on the CMS [SERVERNAME]

    .EXAMPLE
        PS C:\> "server1", "server1\nordwind", "server2" | Invoke-DbaQuery -File "C:\scripts\sql\rebuild.sql"

        Runs the sql commands stored in rebuild.sql against the instances "server1", "server1\nordwind" and "server2"

    .EXAMPLE
        PS C:\> Get-DbaDatabase -SqlInstance "server1", "server1\nordwind", "server2" | Invoke-DbaQuery -File "C:\scripts\sql\rebuild.sql"

        Runs the sql commands stored in rebuild.sql against all accessible databases of the instances "server1", "server1\nordwind" and "server2"

    #>
    [CmdletBinding(DefaultParameterSetName = "Query")]
    param (
        [parameter(ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstance[]]$SqlInstance,
        [Alias("Credential")]
        [PsCredential]$SqlCredential,
        [string]$Database,
        [Parameter(Mandatory, Position = 0, ParameterSetName = "Query")]
        [string]$Query,
        [Int32]$QueryTimeout = 600,
        [Parameter(Mandatory, ParameterSetName = "File")]
        [Alias("InputFile")]
        [object[]]$File,
        [Parameter(Mandatory, ParameterSetName = "SMO")]
        [Microsoft.SqlServer.Management.Smo.SqlSmoObject[]]$SqlObject,
        [ValidateSet("DataSet", "DataTable", "DataRow", "PSObject", "SingleValue")]
        [string]$As = "DataRow",
        [System.Collections.IDictionary]$SqlParameters,
        [switch]$AppendServerInstance,
        [switch]$MessagesToOutput,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Database[]]$InputObject,
        [switch]$EnableException
    )

    begin {
        Write-Message -Level Debug -Message "Bound parameters: $($PSBoundParameters.Keys -join ", ")"

        $splatInvokeDbaSqlAsync = @{
            As = $As
        }

        if (Test-Bound -ParameterName "SqlParameters") {
            $splatInvokeDbaSqlAsync["SqlParameters"] = $SqlParameters
        }
        if (Test-Bound -ParameterName "AppendServerInstance") {
            $splatInvokeDbaSqlAsync["AppendServerInstance"] = $AppendServerInstance
        }
        if (Test-Bound -ParameterName "Query") {
            $splatInvokeDbaSqlAsync["Query"] = $Query
        }
        if (Test-Bound -ParameterName "QueryTimeout") {
            $splatInvokeDbaSqlAsync["QueryTimeout"] = $QueryTimeout
        }
        if (Test-Bound -ParameterName "MessagesToOutput") {
            $splatInvokeDbaSqlAsync["MessagesToOutput"] = $MessagesToOutput
        }
        if (Test-Bound -ParameterName "Verbose") {
            $splatInvokeDbaSqlAsync["Verbose"] = $Verbose
        }


        if (Test-Bound -ParameterName "File") {
            $files = @()
            $temporaryFiles = @()
            $temporaryFilesCount = 0
            $temporaryFilesPrefix = (97 .. 122 | Get-Random -Count 10 | ForEach-Object { [char]$_ }) -join ''

            foreach ($item in $File) {
                if ($null -eq $item) { continue }

                $type = $item.GetType().FullName

                switch ($type) {
                    "System.IO.DirectoryInfo" {
                        if (-not $item.Exists) {
                            Stop-Function -Message "Directory not found!" -Category ObjectNotFound
                            return
                        }
                        $files += ($item.GetFiles() | Where-Object Extension -EQ ".sql").FullName

                    }
                    "System.IO.FileInfo" {
                        if (-not $item.Exists) {
                            Stop-Function -Message "Directory not found!" -Category ObjectNotFound
                            return
                        }

                        $files += $item.FullName
                    }
                    "System.String" {
                        $uri = [uri]$item

                        switch -regex ($uri.Scheme) {
                            "http" {
                                $tempfile = "$env:TEMP\$temporaryFilesPrefix-$temporaryFilesCount.sql"
                                try {
                                    try {
                                        Invoke-TlsWebRequest -Uri $item -OutFile $tempfile -ErrorAction Stop
                                    } catch {
                                        (New-Object System.Net.WebClient).Proxy.Credentials = [System.Net.CredentialCache]::DefaultNetworkCredentials
                                        Invoke-TlsWebRequest -Uri $item -OutFile $tempfile -ErrorAction Stop
                                    }
                                    $files += $tempfile
                                    $temporaryFilesCount++
                                    $temporaryFiles += $tempfile
                                } catch {
                                    Stop-Function -Message "Failed to download file $item" -ErrorRecord $_
                                    return
                                }
                            }
                            default {
                                try {
                                    $paths = Resolve-Path $item | Select-Object -ExpandProperty Path | Get-Item -ErrorAction Stop
                                } catch {
                                    Stop-Function -Message "Failed to resolve path: $item" -ErrorRecord $_
                                    return
                                }

                                foreach ($path in $paths) {
                                    if (-not $path.PSIsContainer) {
                                        if (([uri]$path.FullName).Scheme -ne 'file') {
                                            Stop-Function -Message "Could not resolve path $path as filesystem object"
                                            return
                                        }
                                        $files += $path.FullName
                                    }
                                }
                            }
                        }
                    }
                    default {
                        Stop-Function -Message "Unkown input type: $type" -Category InvalidArgument
                        return
                    }
                }
            }
        }

        if (Test-Bound -ParameterName "SqlObject") {
            $files = @()
            $temporaryFiles = @()
            $temporaryFilesCount = 0
            $temporaryFilesPrefix = (97 .. 122 | Get-Random -Count 10 | ForEach-Object { [char]$_ }) -join ''

            foreach ($object in $SqlObject) {
                try { $code = Export-DbaScript -InputObject $object -Passthru -EnableException }
                catch {
                    Stop-Function -Message "Failed to generate script for object $object" -ErrorRecord $_
                    return
                }

                try {
                    $newfile = "$env:TEMP\$temporaryFilesPrefix-$temporaryFilesCount.sql"
                    Set-Content -Value $code -Path $newfile -Force -ErrorAction Stop -Encoding UTF8
                    $files += $newfile
                    $temporaryFilesCount++
                    $temporaryFiles += $newfile
                } catch {
                    Stop-Function -Message "Failed to write sql script to temp" -ErrorRecord $_
                    return
                }
            }
        }
    }

    process {
        if (Test-FunctionInterrupt) { return }
        if (Test-Bound -ParameterName "Database", "InputObject" -And) {
            Stop-Function -Category InvalidArgument -Message "You can't use -Database with piped databases"
            return
        }
        if (Test-Bound -ParameterName "SqlInstance", "InputObject" -And) {
            Stop-Function -Category InvalidArgument -Message "You can't use -SqlInstance with piped databases"
            return
        }

        foreach ($db in $InputObject) {
            if (!$db.IsAccessible) {
                Write-Message -Level Warning -Message "Database $db is not accessible. Skipping."
                continue
            }
            $server = $db.Parent
            $conncontext = $server.ConnectionContext
            if ($conncontext.DatabaseName -ne $db.Name) {
                $conncontext = $server.ConnectionContext.Copy()
                $conncontext.DatabaseName = $db.Name
            }
            try {
                if ($File -or $SqlObject) {
                    foreach ($item in $files) {
                        if ($null -eq $item) {continue}
                        $filePath = $(Resolve-Path -LiteralPath $item).ProviderPath
                        $QueryfromFile = [System.IO.File]::ReadAllText("$filePath")
                        Invoke-DbaAsync -SQLConnection $conncontext @splatInvokeDbaSqlAsync -Query $QueryfromFile
                    }
                } else { Invoke-DbaAsync -SQLConnection $conncontext @splatInvokeDbaSqlAsync }
            } catch {
                Stop-Function -Message "[$db] Failed during execution" -ErrorRecord $_ -Target $server -Continue
            }
        }
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -ErrorRecord $_ -Target $instance -Continue
            }
            $conncontext = $server.ConnectionContext
            try {
                if ($Database -and $conncontext.DatabaseName -ne $Database) {
                    $conncontext = $server.ConnectionContext.Copy()
                    $conncontext.DatabaseName = $Database
                }
                if ($File -or $SqlObject) {
                    foreach ($item in $files) {
                        if ($null -eq $item) {continue}
                        $filePath = $(Resolve-Path -LiteralPath $item).ProviderPath
                        $QueryfromFile = [System.IO.File]::ReadAllText("$filePath")
                        Invoke-DbaAsync -SQLConnection $conncontext @splatInvokeDbaSqlAsync -Query $QueryfromFile
                    }
                } else {
                    Invoke-DbaAsync -SQLConnection $conncontext @splatInvokeDbaSqlAsync
                }
            } catch {
                Stop-Function -Message "[$instance] Failed during execution" -ErrorRecord $_ -Target $instance -Continue
            }
        }
    }

    end {
        # Execute end even when interrupting, as only used for cleanup

        if ($temporaryFiles) {
            # Clean up temporary files that were downloaded
            foreach ($item in $temporaryFiles) {
                Remove-Item -Path $item -ErrorAction Ignore
            }
        }
        Test-DbaDeprecation -DeprecatedOn '1.0.0' -Alias Invoke-DbaCmd
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Invoke-DbaSqlQuery
    }
}

tools\dbatools\functions\Grant-DbaAgPermission.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Grant-DbaAgPermission {
    <#
    .SYNOPSIS
        Grants endpoint and availability group permissions to a login.

    .DESCRIPTION
        Grants endpoint and availability group permissions to a login. If the account is a Windows login and does not exist, it will be automatically added.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Login
        The login or logins to modify.

    .PARAMETER AvailabilityGroup
        Only modify specific availability groups.

    .PARAMETER Type
        Specify type: Endpoint or AvailabilityGroup. Endpoint will modify the DatabaseMirror endpoint type.

    .PARAMETER Permission
        Grants one or more permissions:
            Alter
            Connect
            Control
            CreateSequence
            CreateAnyDatabase
            Delete
            Execute
            Impersonate
            Insert
            Receive
            References
            Select
            Send
            TakeOwnership
            Update
            ViewChangeTracking
            ViewDefinition

            CreateAnyDatabase

        Connect is default.

    .PARAMETER InputObject
        Enables piping from Get-DbaLogin.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: AvailabilityGroup, HA, AG
        Author: Chrissy LeMaire (@cl), netnerds.net
        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Grant-DbaAgPermission

    .EXAMPLE
        PS C:\> Grant-DbaAgPermission -SqlInstance sql2017a -Type AvailabilityGroup -AvailabilityGroup SharePoint -Login ad\spservice -Permission CreateAnyDatabase

        Adds CreateAnyDatabase permissions to ad\spservice on the SharePoint availability group on sql2017a. Does not prompt for confirmation.

    .EXAMPLE
        PS C:\> Grant-DbaAgPermission -SqlInstance sql2017a -Type AvailabilityGroup -AvailabilityGroup ag1, ag2 -Login ad\spservice -Permission CreateAnyDatabase -Confirm

        Adds CreateAnyDatabase permissions to ad\spservice on the ag1 and ag2 availability groups on sql2017a. Prompts for confirmation.

    .EXAMPLE
        PS C:\> Get-DbaLogin -SqlInstance sql2017a | Out-GridView -Passthru | Grant-DbaAgPermission -Type EndPoint

        Grants the selected logins Connect permissions on the DatabaseMirroring endpoint for sql2017a
    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'Low')]
    param (
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$Login,
        [string[]]$AvailabilityGroup,
        [parameter(Mandatory)]
        [ValidateSet('Endpoint', 'AvailabilityGroup')]
        [string[]]$Type,
        [ValidateSet('Alter', 'Connect', 'Control', 'CreateAnyDatabase', 'CreateSequence', 'Delete', 'Execute', 'Impersonate', 'Insert', 'Receive', 'References', 'Select', 'Send', 'TakeOwnership', 'Update', 'ViewChangeTracking', 'ViewDefinition')]
        [string[]]$Permission = "Connect",
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Login[]]$InputObject,
        [switch]$EnableException
    )
    process {
        if ($SqlInstance -and -not $Login -and -not $AvailabilityGroup) {
            Stop-Function -Message "You must specify one or more logins when using the SqlInstance parameter."
            return
        }

        if ($Type -contains "AvailabilityGroup" -and -not $AvailabilityGroup) {
            Stop-Function -Message "You must specify at least one availability group when using the AvailabilityGroup type."
            return
        }

        foreach ($instance in $SqlInstance) {
            if ($perm -contains "CreateAnyDatabase") {
                try {
                    $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
                } catch {
                    Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
                }

                foreach ($ag in $AvailabilityGroup) {
                    try {
                        $server.Query("ALTER AVAILABILITY GROUP $ag GRANT CREATE ANY DATABASE")
                    } catch {
                        Stop-Function -Message "Failure" -ErrorRecord $_ -Target $instance
                        return
                    }
                }
            } elseif ($Login) {
                $InputObject += Get-DbaLogin -SqlInstance $instance -SqlCredential $SqlCredential -Login $Login
                foreach ($account in $Login) {
                    if ($account -notin $InputObject.Name) {
                        try {
                            $InputObject += New-DbaLogin -SqlInstance $server -Login $account -EnableException
                        } catch {
                            Stop-Function -Message "Failure" -ErrorRecord $_ -Target $instance
                            return
                        }
                    }
                }
            }
        }

        foreach ($account in $InputObject) {
            $server = $account.Parent
            if ($Type -contains "Endpoint") {
                $server.Endpoints.Refresh()
                $endpoint = $server.Endpoints | Where-Object EndpointType -eq DatabaseMirroring

                if (-not $endpoint) {
                    Stop-Function -Message "DatabaseMirroring endpoint does not exist on $server" -Target $server -Continue
                }

                foreach ($perm in $Permission) {
                    if ($Pscmdlet.ShouldProcess($server.Name, "Granting $perm on $endpoint")) {
                        if ($perm -in 'CreateAnyDatabase') {
                            Stop-Function -Message "$perm not supported by endpoints" -Continue
                        }
                        try {
                            $bigperms = New-Object Microsoft.SqlServer.Management.Smo.ObjectPermissionSet([Microsoft.SqlServer.Management.Smo.ObjectPermission]::$perm)
                            $endpoint.Grant($bigperms, $account.Name)
                            [pscustomobject]@{
                                ComputerName = $account.ComputerName
                                InstanceName = $account.InstanceName
                                SqlInstance  = $account.SqlInstance
                                Name         = $account.Name
                                Permission   = $perm
                                Type         = "Grant"
                                Status       = "Success"
                            }
                        } catch {
                            Stop-Function -Message "Failure" -ErrorRecord $_ -Target $ag -Continue
                        }
                    }
                }
            }

            if ($Type -contains "AvailabilityGroup") {
                $ags = Get-DbaAvailabilityGroup -SqlInstance $account.Parent -AvailabilityGroup $AvailabilityGroup
                foreach ($ag in $ags) {
                    foreach ($perm in $Permission) {
                        if ($perm -notin 'Alter', 'Control', 'TakeOwnership', 'ViewDefinition') {
                            Stop-Function -Message "$perm not supported by availability groups" -Continue
                        }
                        if ($Pscmdlet.ShouldProcess($server.Name, "Granting $perm on $ags")) {
                            try {
                                $bigperms = New-Object Microsoft.SqlServer.Management.Smo.ObjectPermissionSet([Microsoft.SqlServer.Management.Smo.ObjectPermission]::$perm)
                                $ag.Grant($bigperms, $account.Name)
                                [pscustomobject]@{
                                    ComputerName = $account.ComputerName
                                    InstanceName = $account.InstanceName
                                    SqlInstance  = $account.SqlInstance
                                    Name         = $account.Name
                                    Permission   = $perm
                                    Type         = "Grant"
                                    Status       = "Success"
                                }
                            } catch {
                                Stop-Function -Message "Failure" -ErrorRecord $_ -Target $ag -Continue
                            }
                        }
                    }
                }
            }
        }
    }
}

tools\dbatools\functions\New-DbaEndpoint.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function New-DbaEndpoint {
    <#
    .SYNOPSIS
        Creates endpoints on a SQL Server instance.

    .DESCRIPTION
        Creates endpoints on a SQL Server instance.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Name
        The name of the endpoint. If a name is not specified, one will be auto-generated.

    .PARAMETER Type
        The type of endpoint. Defaults to DatabaseMirroring. Options: DatabaseMirroring, ServiceBroker, Soap, TSql

    .PARAMETER Protocol
        The type of protocol. Defaults to tcp. Options: Tcp, NamedPipes, Http, Via, SharedMemory

    .PARAMETER Role
        The type of role. Defaults to All. Options: All, None, Partner, Witness

    .PARAMETER Port
        Port for TCP. If one is not provided, it will be autogenerated.

    .PARAMETER SslPort
        Port for SSL

    .PARAMETER Certificate
        Database certificate used for authentication.

    .PARAMETER EndpointEncryption
        Used to specify the state of encryption on the endpoint. Defaults to required.
        Disabled
        Required
        Supported

    .PARAMETER EncryptionAlgorithm
        Specifies an encryption algorithm used on an endpoint. Defaults to Aes.

        Options are:
        AesRC4
        Aes
        None
        RC4
        RC4Aes

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Owner
        Owner of the endpoint. Defaults to sa.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Endpoint
        Author: Chrissy LeMaire (@cl), netnerds.net
        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/New-DbaEndpoint

    .EXAMPLE
        PS C:\> New-DbaEndpoint -SqlInstance localhost

        Creates all Endpoint(s) on the local default SQL Server instance

    .EXAMPLE
        PS C:\> New-DbaEndpoint -SqlInstance localhost, sql2016

        Returns all Endpoint(s) for the local and sql2016 SQL Server instances

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'Low')]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string]$Name,
        [ValidateSet('DatabaseMirroring', 'ServiceBroker', 'Soap', 'TSql')]
        [string]$Type = 'DatabaseMirroring',
        [ValidateSet('Tcp', 'NamedPipes', 'Http', 'Via', 'SharedMemory')]
        [string]$Protocol = 'Tcp',
        [ValidateSet('All', 'None', 'Partner', 'Witness')]
        [string]$Role = 'All',
        [ValidateSet('Disabled', 'Required', 'Supported')]
        [string]$EndpointEncryption = 'Required',
        [ValidateSet('Aes', 'AesRC4', 'None', 'RC4', 'RC4Aes')]
        [string]$EncryptionAlgorithm = 'Aes',
        [string]$Certificate,
        [int]$Port,
        [int]$SslPort,
        [string]$Owner,
        [switch]$EnableException
    )
    process {
        if ((Test-Bound -ParameterName Name -Not)) {
            $name = "endpoint-" + [DateTime]::Now.ToString('s').Replace(":", "-")
        }

        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            if (-not (Test-Bound -ParameterName Owner)) {
                $Owner = Get-SaLoginName -SqlInstance $server
            }

            if ($Certificate) {
                $cert = Get-DbaDbCertificate -SqlInstance $server -Certificate $Certificate
                if (-not $cert) {
                    Stop-Function -Message "Certificate $Certificate does not exist on $instance" -ErrorRecord $_ -Target $Certificate -Continue
                }
            }

            # Thanks to https://github.com/mmessano/PowerShell/blob/master/SQL-ConfigureDatabaseMirroring.ps1
            if ($Port) {
                $tcpPort = $port
            } else {
                $thisport = (Get-DbaEndPoint -SqlInstance $server).Protocol.Tcp
                $measure = $thisport | Measure-Object ListenerPort -Maximum

                if ($thisport.ListenerPort -eq 0) {
                    $tcpPort = 5022
                } elseif ($measure.Maximum) {
                    $maxPort = $measure.Maximum
                    #choose a random port that is greater than the current max port
                    $tcpPort = $maxPort + (New-Object Random).Next(1, 500)
                } else {
                    $maxPort = 5000
                    #choose a random port that is greater than the current max port
                    $tcpPort = $maxPort + (New-Object Random).Next(1, 500)
                }
            }

            if ($Pscmdlet.ShouldProcess($server.Name, "Creating endpoint $Name of type $Type using protocol $Protocol and if TCP then using Port $tcpPort")) {
                try {
                    $endpoint = New-Object Microsoft.SqlServer.Management.Smo.EndPoint $server, $Name
                    $endpoint.ProtocolType = [Microsoft.SqlServer.Management.Smo.ProtocolType]::$Protocol
                    $endpoint.EndpointType = [Microsoft.SqlServer.Management.Smo.EndpointType]::$Type
                    $endpoint.Owner = $Owner
                    if ($Protocol -eq "TCP") {
                        $endpoint.Protocol.Tcp.ListenerPort = $tcpPort
                        $endpoint.Payload.DatabaseMirroring.ServerMirroringRole = [Microsoft.SqlServer.Management.Smo.ServerMirroringRole]::$Role
                        if (Test-Bound -ParameterName SslPort) {
                            $endpoint.Protocol.Tcp.SslPort = $SslPort
                        }

                        $endpoint.Payload.DatabaseMirroring.EndpointEncryption = [Microsoft.SqlServer.Management.Smo.EndpointEncryption]::$EndpointEncryption
                        $endpoint.Payload.DatabaseMirroring.EndpointEncryptionAlgorithm = [Microsoft.SqlServer.Management.Smo.EndpointEncryptionAlgorithm]::$EncryptionAlgorithm

                    }
                    if ($Certificate) {
                        $outscript = $endpoint.Script()
                        $outscript = $outscript.Replace("ROLE = ALL,", "ROLE = ALL, AUTHENTICATION = CERTIFICATE $cert,")
                        $server.Query($outscript)
                    } else {
                        $null = $endpoint.Create()
                    }

                    $server.Endpoints.Refresh()
                    Get-DbaEndpoint -SqlInstance $server -Endpoint $name
                } catch {
                    Stop-Function -Message "Failure" -ErrorRecord $_ -Continue
                }
            }
        }
    }
}

tools\dbatools\functions\New-DbaLogin.ps1

function New-DbaLogin {
    <#
    .SYNOPSIS
        Creates a new SQL Server login

    .DESCRIPTION
        Creates a new SQL Server login with provided specifications

    .PARAMETER SqlInstance
        The target SQL Server(s)

    .PARAMETER SqlCredential
        Allows you to login to SQL Server using alternative credentials

    .PARAMETER Login
        The Login name(s)

    .PARAMETER SecurePassword
        Secure string used to authenticate the Login

    .PARAMETER HashedPassword
        Hashed password string used to authenticate the Login

    .PARAMETER InputObject
        Takes the parameters required from a Login object that has been piped into the command

    .PARAMETER LoginRenameHashtable
        Pass a hash table into this parameter to change login names when piping objects into the procedure

    .PARAMETER MapToCertificate
        Map the login to a certificate

    .PARAMETER MapToAsymmetricKey
        Map the login to an asymmetric key

    .PARAMETER MapToCredential
        Map the login to a credential

    .PARAMETER Sid
        Provide an explicit Sid that should be used when creating the account. Can be [byte[]] or hex [string] ('0xFFFF...')

    .PARAMETER DefaultDatabase
        Default database for the login

    .PARAMETER Language
        Login's default language

    .PARAMETER PasswordExpiration
        Enforces password expiration policy. Requires PasswordPolicy to be enabled. Can be $true or $false(default)

    .PARAMETER PasswordPolicy
        Enforces password complexity policy. Can be $true or $false(default)

    .PARAMETER Disabled
        Create the login in a disabled state

    .PARAMETER NewSid
        Ignore sids from the piped login object to generate new sids on the server. Useful when copying login onto the same server

    .PARAMETER Force
        If login exists, drop and recreate

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Login, Security
        Author: Kirill Kravtsov (@nvarscar)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/New-DbaLogin

    .EXAMPLE
        PS C:\> New-DbaLogin -SqlInstance Server1,Server2 -Login Newlogin

        You will be prompted to securely enter the password for a login [Newlogin]. The login would be created on servers Server1 and Server2 with default parameters.

    .EXAMPLE
        PS C:\> $securePassword = Read-Host "Input password" -AsSecureString
        PS C:\> New-DbaLogin -SqlInstance Server1\sql1 -Login Newlogin -Password $securePassword -PasswordPolicy -PasswordExpiration

        Creates a login on Server1\sql1 with a predefined password. The login will have password and expiration policies enforced onto it.

    .EXAMPLE
        PS C:\> Get-DbaLogin -SqlInstance sql1 -Login Oldlogin | New-DbaLogin -SqlInstance sql1 -LoginRenameHashtable @{Oldlogin = 'Newlogin'} -Force -NewSid -Disabled:$false

        Copies a login [Oldlogin] to the same instance sql1 with the same parameters (including password). New login will have a new sid, a new name [Newlogin] and will not be disabled. Existing login [Newlogin] will be removed prior to creation.

    .EXAMPLE
        PS C:\> Get-DbaLogin -SqlInstance sql1 -Login Login1,Login2 | New-DbaLogin -SqlInstance sql2 -PasswordPolicy -PasswordExpiration -DefaultDatabase tempdb -Disabled

        Copies logins [Login1] and [Login2] from instance sql1 to instance sql2, but enforces password and expiration policies for the new logins. New logins will also have a default database set to [tempdb] and will be created in a disabled state.

    .EXAMPLE
        PS C:\> New-DbaLogin -SqlInstance sql1 -Login domain\user

        Creates a new Windows Authentication backed login on sql1. The login will be part of the public server role.

    #>
    [CmdletBinding(SupportsShouldProcess, DefaultParameterSetName = "Password", ConfirmImpact = "Low")]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSAvoidUsingPlainTextForPassword", "", Justification = "For Parameters Password and MapToCredential")]
    param (
        [parameter(Mandatory, Position = 1)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias("Name", "LoginName")]
        [parameter(ParameterSetName = "Password", Position = 2)]
        [parameter(ParameterSetName = "PasswordHash")]
        [parameter(ParameterSetName = "MapToCertificate")]
        [parameter(ParameterSetName = "MapToAsymmetricKey")]
        [string[]]$Login,
        [parameter(ValueFromPipeline)]
        [parameter(ParameterSetName = "Password")]
        [parameter(ParameterSetName = "PasswordHash")]
        [parameter(ParameterSetName = "MapToCertificate")]
        [parameter(ParameterSetName = "MapToAsymmetricKey")]
        [object[]]$InputObject,
        [Alias("Rename")]
        [hashtable]$LoginRenameHashtable,
        [parameter(ParameterSetName = "Password", Position = 3)]
        [Alias("Password")]
        [Security.SecureString]$SecurePassword,
        [Alias("Hash", "PasswordHash")]
        [parameter(ParameterSetName = "PasswordHash")]
        [string]$HashedPassword,
        [parameter(ParameterSetName = "MapToCertificate")]
        [string]$MapToCertificate,
        [parameter(ParameterSetName = "MapToAsymmetricKey")]
        [string]$MapToAsymmetricKey,
        [string]$MapToCredential,
        [object]$Sid,
        [Alias("DefaulDB")]
        [parameter(ParameterSetName = "Password")]
        [parameter(ParameterSetName = "PasswordHash")]
        [string]$DefaultDatabase,
        [parameter(ParameterSetName = "Password")]
        [parameter(ParameterSetName = "PasswordHash")]
        [string]$Language,
        [Alias("Expiration", "CheckExpiration")]
        [parameter(ParameterSetName = "Password")]
        [parameter(ParameterSetName = "PasswordHash")]
        [switch]$PasswordExpiration,
        [Alias("Policy", "CheckPolicy")]
        [parameter(ParameterSetName = "Password")]
        [parameter(ParameterSetName = "PasswordHash")]
        [switch]$PasswordPolicy,
        [Alias("Disable")]
        [switch]$Disabled,
        [switch]$NewSid,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        if ($Sid) {
            if ($Sid.GetType().Name -ne 'Byte[]') {
                foreach ($symbol in $Sid.TrimStart("0x").ToCharArray()) {
                    if ($symbol -notin "0123456789ABCDEF".ToCharArray()) {
                        Stop-Function -Message "Sid has invalid character '$symbol', cannot proceed." -Category InvalidArgument -EnableException $EnableException
                        return
                    }
                }
                $Sid = Convert-HexStringToByte $Sid
            }
        }

        if ($HashedPassword) {
            if ($HashedPassword.GetType().Name -eq 'Byte[]') {
                $HashedPassword = Convert-ByteToHexString $HashedPassword
            }
        }
    }

    process {
        #At least one of those should be specified
        if (!($Login -or $InputObject)) {
            Stop-Function -Message "No logins have been specified." -Category InvalidArgument -EnableException $EnableException
            Return
        }

        $loginCollection = @()
        if ($InputObject) {
            $loginCollection += $InputObject
            if ($Login) {
                Stop-Function -Message "Parameter -Login is not supported when processing objects from -InputObject. If you need to rename the logins, please use -LoginRenameHashtable." -Category InvalidArgument -EnableException $EnableException
                Return
            }
        } else {
            $loginCollection += $Login
        }
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            foreach ($loginItem in $loginCollection) {
                #check if $loginItem is an SMO Login object
                if ($loginItem.GetType().Name -eq 'Login') {
                    #Get all the necessary fields
                    $loginName = $loginItem.Name
                    $loginType = $loginItem.LoginType
                    $currentSid = $loginItem.Sid
                    $currentDefaultDatabase = $loginItem.DefaultDatabase
                    $currentLanguage = $loginItem.Language
                    $currentPasswordExpiration = $loginItem.PasswordExpiration
                    $currentPasswordPolicyEnforced = $loginItem.PasswordPolicyEnforced
                    $currentDisabled = $loginItem.IsDisabled

                    #Get previous password
                    if ($loginType -eq 'SqlLogin' -and !($SecurePassword -or $HashedPassword)) {
                        $sourceServer = $loginItem.Parent
                        switch ($sourceServer.versionMajor) {
                            0 { $sql = "SELECT CONVERT(VARBINARY(256),password) as hashedpass FROM master.dbo.syslogins WHERE loginname='$loginName'" }
                            8 { $sql = "SELECT CONVERT(VARBINARY(256),password) as hashedpass FROM dbo.syslogins WHERE name='$loginName'" }
                            9 { $sql = "SELECT CONVERT(VARBINARY(256),password_hash) as hashedpass FROM sys.sql_logins where name='$loginName'" }
                            default {
                                $sql = "SELECT CAST(CONVERT(VARCHAR(256), CAST(LOGINPROPERTY(name,'PasswordHash')
                                    AS VARBINARY(256)), 1) AS NVARCHAR(max)) AS hashedpass
                                    FROM sys.server_principals
                                    WHERE principal_id = $($loginItem.id)"
                            }
                        }

                        try {
                            $hashedPass = $sourceServer.ConnectionContext.ExecuteScalar($sql)
                        } catch {
                            $hashedPassDt = $sourceServer.Databases['master'].ExecuteWithResults($sql)
                            $hashedPass = $hashedPassDt.Tables[0].Rows[0].Item(0)
                        }

                        if ($hashedPass.GetType().Name -ne "String") {
                            $hashedPass = Convert-ByteToHexString $hashedPass
                        }
                        $currentHashedPassword = $hashedPass
                    }

                    #Get cryptography and attached credentials
                    if ($loginType -eq 'AsymmetricKey') {
                        $currentAsymmetricKey = $loginItem.AsymmetricKey
                    }
                    if ($loginType -eq 'Certificate') {
                        $currentCertificate = $loginItem.Certificate
                    }
                    #This method or property is accessible only while working with SQL Server 2008 or later.
                    if ($sourceServer.versionMajor -gt 9) {
                        if ($loginItem.EnumCredentials()) {
                            $currentCredential = $loginItem.EnumCredentials()
                        }
                    }
                } else {
                    $loginName = $loginItem
                    $currentSid = $currentDefaultDatabase = $currentLanguage = $currentPasswordExpiration = $currentAsymmetricKey = $currentCertificate = $currentCredential = $currentDisabled = $currentPasswordPolicyEnforced = $null

                    if ($PsCmdlet.ParameterSetName -eq "MapToCertificate") { $loginType = 'Certificate' }
                    elseif ($PsCmdlet.ParameterSetName -eq "MapToAsymmetricKey") { $loginType = 'AsymmetricKey' }
                    elseif ($loginItem.IndexOf('\') -eq -1) {    $loginType = 'SqlLogin' }
                    else { $loginType = 'WindowsUser' }
                }

                if (($server.LoginMode -ne [Microsoft.SqlServer.Management.Smo.ServerLoginMode]::Mixed) -and ($loginType -eq 'SqlLogin')) {
                    Write-Message -Level Warning -Message "$instance does not have Mixed Mode enabled. [$loginName] is an SQL Login. Enable mixed mode authentication after the migration completes to use this type of login."
                }

                if ($Sid) {
                    $currentSid = $Sid
                }
                if ($DefaultDatabase) {
                    $currentDefaultDatabase = $DefaultDatabase
                }
                if ($Language) {
                    $currentLanguage = $Language
                }
                if ($PSBoundParameters.Keys -contains 'PasswordExpiration') {
                    $currentPasswordExpiration = $PasswordExpiration
                }
                if ($PSBoundParameters.Keys -contains 'PasswordPolicy') {
                    $currentPasswordPolicyEnforced = $PasswordPolicy
                }
                if ($PSBoundParameters.Keys -contains 'MapToAsymmetricKey') {
                    $currentAsymmetricKey = $MapToAsymmetricKey
                }
                if ($PSBoundParameters.Keys -contains 'MapToCertificate') {
                    $currentCertificate = $MapToCertificate
                }
                if ($PSBoundParameters.Keys -contains 'MapToCredential') {
                    $currentCredential = $MapToCredential
                }
                if ($PSBoundParameters.Keys -contains 'Disabled') {
                    $currentDisabled = $Disabled
                }

                #Apply renaming if necessary
                if ($LoginRenameHashtable.Keys -contains $loginName) {
                    $loginName = $LoginRenameHashtable[$loginName]
                }

                #Requesting password if required
                if ($loginItem.GetType().Name -ne 'Login' -and $loginType -eq 'SqlLogin' -and !($SecurePassword -or $HashedPassword)) {
                    $SecurePassword = Read-Host -AsSecureString -Prompt "Enter a new password for the SQL Server login(s)"
                }

                #verify if login exists on the server
                if (($existingLogin = $server.Logins[$loginName])) {
                    if ($force) {
                        if ($Pscmdlet.ShouldProcess($existingLogin, "Dropping existing login $loginName on $instance because -Force was used")) {
                            try {
                                $existingLogin.Drop()
                            } catch {
                                Stop-Function -Message "Could not remove existing login $loginName on $instance, skipping." -Target $loginName -Continue
                            }
                        }
                    } else {
                        Stop-Function -Message "Login $loginName already exists on $instance and -Force was not specified" -Target $loginName -Continue
                    }
                }


                if ($Pscmdlet.ShouldProcess($SqlInstance, "Creating login $loginName on $instance")) {
                    try {
                        $newLogin = New-Object Microsoft.SqlServer.Management.Smo.Login($server, $loginName)
                        $newLogin.LoginType = $loginType

                        $withParams = ""

                        if ($loginType -eq 'SqlLogin' -and $currentSid -and !$NewSid) {
                            Write-Message -Level Verbose -Message "Setting $loginName SID"
                            $withParams += ", SID = " + (Convert-ByteToHexString $currentSid)
                            $newLogin.Set_Sid($currentSid)
                        }

                        if ($loginType -in ("WindowsUser", "WindowsGroup", "SqlLogin")) {
                            if ($currentDefaultDatabase) {
                                Write-Message -Level Verbose -Message "Setting $loginName default database to $currentDefaultDatabase"
                                $withParams += ", DEFAULT_DATABASE = [$currentDefaultDatabase]"
                                $newLogin.DefaultDatabase = $currentDefaultDatabase
                            }

                            if ($currentLanguage) {
                                Write-Message -Level Verbose -Message "Setting $loginName language to $currentLanguage"
                                $withParams += ", DEFAULT_LANGUAGE = [$currentLanguage]"
                                $newLogin.Language = $currentLanguage
                            }

                            #CHECK_EXPIRATION: default - OFF
                            if ($currentPasswordExpiration) {
                                $withParams += ", CHECK_EXPIRATION = ON"
                                $newLogin.PasswordExpirationEnabled = $true
                            } else {
                                $withParams += ", CHECK_EXPIRATION = OFF"
                                $newLogin.PasswordExpirationEnabled = $false
                            }

                            #CHECK_POLICY: default - ON
                            if ($currentPasswordPolicyEnforced) {
                                $withParams += ", CHECK_POLICY = ON"
                                $newLogin.PasswordPolicyEnforced = $true
                            } else {
                                $withParams += ", CHECK_POLICY = OFF"
                                $newLogin.PasswordPolicyEnforced = $false
                            }

                            #Generate hashed password if necessary
                            if ($SecurePassword) {
                                $currentHashedPassword = Get-PasswordHash $SecurePassword $server.versionMajor
                            } elseif ($HashedPassword) {
                                $currentHashedPassword = $HashedPassword
                            }
                        } elseif ($loginType -eq 'AsymmetricKey') {
                            $newLogin.AsymmetricKey = $currentAsymmetricKey
                        } elseif ($loginType -eq 'Certificate') {
                            $newLogin.Certificate = $currentCertificate
                        }

                        #Add credential
                        if ($currentCredential) {
                            $withParams += ", CREDENTIAL = [$currentCredential]"
                        }

                        Write-Message -Level Verbose -Message "Adding as login type $loginType"

                        # Attempt to add login using SMO, then T-SQL
                        try {
                            if ($loginType -in ("WindowsUser", "WindowsGroup", "AsymmetricKey", "Certificate")) {
                                if ($withParams) { $withParams = " WITH " + $withParams.TrimStart(',') }
                                $newLogin.Create()
                            } elseif ($loginType -eq "SqlLogin") {
                                $newLogin.Create($currentHashedPassword, [Microsoft.SqlServer.Management.Smo.LoginCreateOptions]::IsHashed)
                            }
                            $newLogin.Refresh()

                            #Adding credential
                            if ($currentCredential) {
                                try {
                                    $newLogin.AddCredential($currentCredential)
                                } catch {
                                    $newLogin.Drop()
                                    Stop-Function -Message "Failed to add $loginName to $instance." -Category InvalidOperation -ErrorRecord $_ -Target $instance -Continue
                                }
                            }
                            Write-Message -Level Verbose -Message "Successfully added $loginName to $instance."
                        } catch {
                            Write-Message -Level Verbose -Message "Failed to create $loginName on $instance using SMO, trying T-SQL."
                            try {
                                if ($loginType -eq 'AsymmetricKey') { $sql = "CREATE LOGIN [$loginName] FROM ASYMMETRIC KEY [$currentAsymmetricKey]" }
                                elseif ($loginType -eq 'Certificate') { $sql = "CREATE LOGIN [$loginName] FROM CERTIFICATE [$currentCertificate]" }
                                elseif ($loginType -eq "SqlLogin") { $sql = "CREATE LOGIN [$loginName] WITH PASSWORD = $currentHashedPassword HASHED" + $withParams }
                                else { $sql = "CREATE LOGIN [$loginName] FROM WINDOWS" + $withParams }

                                $null = $server.Query($sql)
                                $newLogin = $server.logins[$loginName]
                                Write-Message -Level Verbose -Message "Successfully added $loginName to $instance."
                            } catch {
                                Stop-Function -Message "Failed to add $loginName to $instance." -Category InvalidOperation -ErrorRecord $_ -Target $instance -Continue
                            }
                        }

                        #Process the Disabled property
                        if ($currentDisabled) {
                            try {
                                $newLogin.Disable()
                                Write-Message -Level Verbose -Message "Login $loginName has been disabled on $instance."
                            } catch {
                                Write-Message -Level Verbose -Message "Failed to disable $loginName on $instance using SMO, trying T-SQL."
                                try {
                                    $sql = "ALTER LOGIN [$loginName] DISABLE"
                                    $null = $server.Query($sql)
                                    Write-Message -Level Verbose -Message "Login $loginName has been disabled on $instance."
                                } catch {
                                    Stop-Function -Message "Failed to disable $loginName on $instance." -Category InvalidOperation -ErrorRecord $_ -Target $instance -Continue
                                }
                            }
                        }
                        #Display results
                        Get-DbaLogin -SqlInstance $server -Login $loginName
                    } catch {
                        Stop-Function -Message "Failed to create login $loginName on $instance." -Target $credential -InnerErrorRecord $_ -Continue
                    }
                }
            }
        }
    }
}

tools\dbatools\functions\New-DbaScriptingOption.ps1

function New-DbaScriptingOption {
    <#
    .SYNOPSIS
        Creates a new Microsoft.SqlServer.Management.Smo.ScriptingOptions object

    .DESCRIPTION
        Creates a new Microsoft.SqlServer.Management.Smo.ScriptingOptions object. Basically saves you the time from remembering the SMO assembly name ;)

        See https://msdn.microsoft.com/en-us/library/microsoft.sqlserver.management.smo.scriptingoptions.aspx for more information

    .NOTES
        Tags: Migration, Backup, DR
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/New-DbaScriptingOption

    .EXAMPLE
        PS C:\> $options = New-DbaScriptingOption
        PS C:\> $options.ScriptDrops = $false
        PS C:\> $options.WithDependencies = $true
        PS C:\> Get-DbaAgentJob -SqlInstance sql2016 | Export-DbaScript -ScriptingOptionObject $options

        Exports Agent Jobs with the Scripting Options ScriptDrops set to $false and WithDependencies set to true

    #>
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseShouldProcessForStateChangingFunctions", "")]
    param()
    New-Object Microsoft.SqlServer.Management.Smo.ScriptingOptions
}

tools\dbatools\functions\New-DbaServiceMasterKey.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function New-DbaServiceMasterKey {
    <#
    .SYNOPSIS
        Creates a new service master key.

    .DESCRIPTION
        Creates a new service master key in the master database.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Allows you to login to SQL Server using alternative credentials.

    .PARAMETER SecurePassword
        Secure string used to create the key.

    .PARAMETER Credential
        Enables easy creation of a secure password.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Certificate
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> New-DbaServiceMasterKey -SqlInstance Server1

        You will be prompted to securely enter your Service Key password, then a master key will be created in the master database on server1 if it does not exist.

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [PSCredential]$Credential,
        [Alias("Password")]
        [Security.SecureString]$SecurePassword,
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            if ($PSCmdlet.ShouldProcess("$instance", "Creating New MasterKey")) {
                New-DbaDbMasterKey -SqlInstance $instance -Database master -SecurePassword $SecurePassword -Credential $Credential
            }
        }
    }
}

tools\dbatools\functions\New-DbaSsisCatalog.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function New-DbaSsisCatalog {
    <#
    .SYNOPSIS
        Enables the SSIS Catalog on a SQL Server 2012+

    .DESCRIPTION
        After installing the SQL Server Engine and SSIS you still have to enable the SSIS Catalog. This function will enable the catalog and gives the option of supplying the password.

    .PARAMETER SqlInstance
        SQL Server you wish to run the function on.

    .PARAMETER SqlCredential
        Credentials used to connect to the SQL Server

    .PARAMETER SecurePassword
        Required password that will be used for the security key in SSISDB.

    .PARAMETER Credential
        Use a credential object instead of a securepassword

    .PARAMETER SsisCatalog
        SSIS catalog name. By default, this is SSISDB.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: SSIS, SSISDB, Catalog
        Author: Stephen Bennett, https://sqlnotesfromtheunderground.wordpress.com/

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/New-DbaSsisCatalog

    .EXAMPLE
        PS C:\> $SecurePassword = Read-Host -AsSecureString -Prompt "Enter password"
        PS C:\> New-DbaSsisCatalog -SqlInstance DEV01 -SecurePassword $SecurePassword

        Creates the SSIS Catalog on server DEV01 with the specified password.

    .EXAMPLE
        PS C:\> New-DbaSsisCatalog -SqlInstance sql2016 -Credential usernamedoesntmatter

        Creates the SSIS Catalog on server DEV01 with the specified password in the credential prompt. As the example username suggets the username does not matter.
        This is simply an easier way to get a secure password.
    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [PSCredential]$Credential,
        [Alias("Password")]
        [Security.SecureString]$SecurePassword,
        [string]$SsisCatalog = "SSISDB",
        [switch]$EnableException
    )
    begin {
        if (-not $SecurePassword -and -not $Credential) {
            Stop-Function -Message "You must specify either -SecurePassword or -Credential"
            return
        }
        if (-not $SecurePassword -and $Credential) {
            $SecurePassword = $Credential.Password
        }
    }
    process {
        if (Test-FunctionInterrupt) {
            return
        }
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 10
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            ## check if SSIS and Engine running on box
            $services = Get-DbaService -ComputerName $server.ComputerName

            $ssisservice = $Services | Where-Object {
                $_.ServiceType -eq "SSIS" -and $_.State -eq "Running"
            }

            if (-not $ssisservice) {
                Stop-Function -Message "SSIS is not running on $instance" -Continue -Target $instance
            }

            #if SQL 2012 or higher only validate databases with ContainmentType = NONE
            $clrenabled = Get-DbaSpConfigure -SqlInstance $server -Name IsSqlClrEnabled

            if (-not $clrenabled.RunningValue) {
                Stop-Function -Message 'CLR Integration must be enabled.  You can enable it by running Set-DbaSpConfigure -SqlInstance sql2012 -Config IsSqlClrEnabled -Value $true' -Continue -Target $instance
            }

            try {
                $ssis = New-Object Microsoft.SqlServer.Management.IntegrationServices.IntegrationServices $server
            } catch {
                Stop-Function -Message "Can't load server" -Target $instance -ErrorRecord $_
                return
            }

            if ($ssis.Catalogs.Count -gt 0) {
                Stop-Function -Message "SSIS Catalog already exists" -Continue -Target $ssis.Catalogs
            } else {
                if ($Pscmdlet.ShouldProcess($server, "Creating SSIS catalog: $SsisCatalog")) {
                    try {
                        $ssisdb = New-Object Microsoft.SqlServer.Management.IntegrationServices.Catalog ($ssis, $SsisCatalog, $(([System.Runtime.InteropServices.marshal]::PtrToStringAuto([System.Runtime.InteropServices.marshal]::SecureStringToBSTR($SecurePassword)))))
                    } catch {
                        Stop-Function -Message "Failed to create SSIS Catalog: $_" -Target $_ -Continue
                    }
                    try {
                        $ssisdb.Create()
                        [pscustomobject]@{
                            ComputerName = $server.ComputerName
                            InstanceName = $server.ServiceName
                            SqlInstance  = $server.DomainInstanceName
                            SsisCatalog  = $SsisCatalog
                            Created      = $true
                        }
                    } catch {
                        $msg = $_.Exception.InnerException.InnerException.Message
                        if (-not $msg) {
                            $msg = $_
                        }
                        Stop-Function -Message "$msg" -Target $_ -Continue
                    }
                }
            }
        }
    }
}

tools\dbatools\functions\New-DbatoolsSupportPackage.ps1

function New-DbatoolsSupportPackage {
    <#
    .SYNOPSIS
        Creates a package of troubleshooting information that can be used by dbatools to help debug issues.

    .DESCRIPTION
        This function creates an extensive debugging package that can help with reproducing and fixing issues.

        The file will be created on the desktop by default and will contain quite a bit of information:
        - OS Information
        - Hardware Information (CPU, Ram, things like that)
        - .NET Information
        - PowerShell Information
        - Your input history
        - The In-Memory message log
        - The In-Memory error log
        - Screenshot of the console buffer (Basically, everything written in your current console, even if you have to scroll upwards to see it.

    .PARAMETER Path
        The folder where to place the output xml in.

    .PARAMETER Variables
        Name of additional variables to attach.
        This allows you to add the content of variables to the support package, if you believe them to be relevant to the case.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Debug
        Author: Friedrich Weinmann (@FredWeinmann)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/New-DbatoolsSupportPackage

    .EXAMPLE
        PS C:\> New-DbatoolsSupportPackage

        Creates a large support pack in order to help us troubleshoot stuff.

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [string]
        $Path = "$($env:USERPROFILE)\Desktop",

        [string[]]
        $Variables,

        [switch]
        [Alias('Silent')]$EnableException
    )

    begin {
        Write-Message -Level InternalComment -Message "Starting"
        Write-Message -Level Verbose -Message "Bound parameters: $($PSBoundParameters.Keys -join ", ")"

        #region Helper functions
        function Get-ShellBuffer {
            [CmdletBinding()]
            param ()

            try {
                # Define limits
                $rec = New-Object System.Management.Automation.Host.Rectangle
                $rec.Left = 0
                $rec.Right = $host.ui.rawui.BufferSize.Width - 1
                $rec.Top = 0
                $rec.Bottom = $host.ui.rawui.BufferSize.Height - 1

                # Load buffer
                $buffer = $host.ui.rawui.GetBufferContents($rec)

                # Convert Buffer to list of strings
                $int = 0
                $lines = @()
                while ($int -le $rec.Bottom) {
                    $n = 0
                    $line = ""
                    while ($n -le $rec.Right) {
                        $line += $buffer[$int, $n].Character
                        $n++
                    }
                    $line = $line.TrimEnd()
                    $lines += $line
                    $int++
                }

                # Measure empty lines at the beginning
                $int = 0
                $temp = $lines[$int]
                while ($temp -eq "") { $int++; $temp = $lines[$int] }

                # Measure empty lines at the end
                $z = $rec.Bottom
                $temp = $lines[$z]
                while ($temp -eq "") { $z--; $temp = $lines[$z] }

                # Skip the line launching this very function
                $z--

                # Measure empty lines at the end (continued)
                $temp = $lines[$z]
                while ($temp -eq "") { $z--; $temp = $lines[$z] }

                # Cut results to the limit and return them
                return $lines[$int .. $z]
            } catch {
                # here to avoid an empty catch
                $null = 1
            }
        }
        #endregion Helper functions
    }
    process {
        if ($Pscmdlet.ShouldProcess("Creating a Support Package for diagnosing Dbatools")) {

            $filePathXml = "$($Path.Trim('\'))\dbatools_support_pack_$(Get-Date -Format "yyyy_MM_dd-HH_mm_ss").xml"
            $filePathZip = $filePathXml -replace "\.xml$", ".zip"

            Write-Message -Level Critical -Message @"
Gathering information...
Will write the final output to: $filePathZip

Please submit this file to the team, to help with troubleshooting whatever issue you encountered.
Be aware that this package contains a lot of information including your input history in the console.
Please make sure no sensitive data (such as passwords) can be caught this way.

Ideally start a new console, perform the minimal steps required to reproduce the issue, then run this command.
This will make it easier for us to troubleshoot and you won't be sending us the keys to your castle.
"@

            $hash = @{ }
            Write-Message -Level Output -Message "Collecting dbatools logged messages (Get-DbatoolsLog)"
            $hash["Messages"] = Get-DbatoolsLog
            Write-Message -Level Output -Message "Collecting dbatools logged errors (Get-DbatoolsLog -Errors)"
            $hash["Errors"] = Get-DbatoolsLog -Errors
            Write-Message -Level Output -Message "Collecting copy of console buffer (what you can see on your console)"
            $hash["ConsoleBuffer"] = Get-ShellBuffer
            Write-Message -Level Output -Message "Collecting Operating System information (Win32_OperatingSystem)"
            $hash["OperatingSystem"] = Get-DbaCmObject -ClassName Win32_OperatingSystem
            Write-Message -Level Output -Message "Collecting CPU information (Win32_Processor)"
            $hash["CPU"] = Get-DbaCmObject -ClassName Win32_Processor
            Write-Message -Level Output -Message "Collecting Ram information (Win32_PhysicalMemory)"
            $hash["Ram"] = Get-DbaCmObject -ClassName Win32_PhysicalMemory
            Write-Message -Level Output -Message "Collecting PowerShell & .NET Version (`$PSVersionTable)"
            $hash["PSVersion"] = $PSVersionTable
            Write-Message -Level Output -Message "Collecting Input history (Get-History)"
            $hash["History"] = Get-History
            Write-Message -Level Output -Message "Collecting list of loaded modules (Get-Module)"
            $hash["Modules"] = Get-Module
            Write-Message -Level Output -Message "Collecting list of loaded snapins (Get-PSSnapin)"
            $hash["SnapIns"] = Get-PSSnapin
            Write-Message -Level Output -Message "Collecting list of loaded assemblies (Name, Version, and Location)"
            $hash["Assemblies"] = [appdomain]::CurrentDomain.GetAssemblies() | Select-Object CodeBase, FullName, Location, ImageRuntimeVersion, GlobalAssemblyCache, IsDynamic

            if (Test-Bound "Variables") {
                Write-Message -Level Output -Message "Adding variables specified for export: $($Variables -join ", ")"
                $hash["Variables"] = $Variables | Get-Variable -ErrorAction Ignore
            }

            $data = [pscustomobject]$hash

            try { $data | Export-Clixml -Path $filePathXml -ErrorAction Stop }
            catch {
                Stop-Function -Message "Failed to export dump to file!" -ErrorRecord $_ -Target $filePathXml
                return
            }

            try { Compress-Archive -Path $filePathXml -DestinationPath $filePathZip -ErrorAction Stop }
            catch {
                Stop-Function -Message "Failed to pack dump-file into a zip archive. Please do so manually before submitting the results as the unpacked xml file will be rather large." -ErrorRecord $_ -Target $filePathZip
                return
            }

            Remove-Item -Path $filePathXml -ErrorAction Ignore
        }
    }
    end {
        Write-Message -Level InternalComment -Message "Ending"
    }
}

tools\dbatools\functions\New-DbaXESession.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function New-DbaXESession {
    <#
    .SYNOPSIS
        Creates a new XESession object - for the dogged.

    .DESCRIPTION
        Creates a new XESession object - for the dogged (very manual, Import-DbaXESession is recommended). See the following for more info:

        https://docs.microsoft.com/en-us/sql/relational-databases/extended-events/use-the-powershell-provider-for-extended-events

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2008 or higher.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Name
        The Name of the session to be created.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: ExtendedEvent, XE, XEvent
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/New-DbaXESession

    .EXAMPLE
        PS C:\> $session = New-DbaXESession -SqlInstance sql2017 -Name XeSession_Test
        PS C:\> $event = $session.AddEvent("sqlserver.file_written")
        PS C:\> $event.AddAction("package0.callstack")
        PS C:\> $session.Create()

        Returns a new XE Session object from sql2017 then adds an event, an action then creates it.

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [parameter(Mandatory)]
        [string]$Name,
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 11
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            if ($Pscmdlet.ShouldProcess($instance, "Creating new XESession")) {
                $SqlConn = $server.ConnectionContext.SqlConnectionObject
                $SqlStoreConnection = New-Object Microsoft.SqlServer.Management.Sdk.Sfc.SqlStoreConnection $SqlConn
                $store = New-Object  Microsoft.SqlServer.Management.XEvent.XEStore $SqlStoreConnection

                $store.CreateSession($Name)
            }
        }
    }
}

tools\dbatools\functions\New-DbaXESmartCsvWriter.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function New-DbaXESmartCsvWriter {
    <#
    .SYNOPSIS
        This response type is used to write Extended Events to a CSV file.

    .DESCRIPTION
        This response type is used to write Extended Events to a CSV file.

    .PARAMETER OutputFile
        Specifies the path to the output CSV file.

    .PARAMETER Overwrite
        Specifies whether any existiting file should be overwritten or not.

    .PARAMETER OutputColumn
        Specifies the list of columns to output from the events. XESmartTarget will capture in memory and write to the target table only the columns (fields or targets) that are present in this list.

        Fields and actions are matched in a case-sensitive manner.

        Expression columns are supported. Specify a column with ColumnName AS Expression to add an expression column (Example: Total AS Reads + Writes)

    .PARAMETER Event
        Specifies a list of events to be processed (with others being ignored. By default, all events are processed.

    .PARAMETER Filter
        Specifies a filter expression in the same form as you would use in the WHERE clause of a SQL query.

        Example: duration > 10000 AND cpu_time > 10000

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: ExtendedEvent, XE, XEvent
        Author: Chrissy LeMaire (@cl) | SmartTarget by Gianluca Sartori (@spaghettidba)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/New-DbaXESmartCsvWriter

    .EXAMPLE
        PS C:\> $columns = "cpu_time", "duration", "physical_reads", "logical_reads", "writes", "row_count"
        PS C:\> $response = New-DbaXESmartCsvWriter -OutputFile c:\temp\workload.csv -OutputColumn $columns -OverWrite -Event "sql_batch_completed"
        PS C:\> Start-DbaXESmartTarget -SqlInstance localhost\sql2017 -Session "Profiler Standard" -Responder $response

        Writes Extended Events to the file "C:\temp\workload.csv".

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [parameter(Mandatory)]
        [string]$OutputFile,
        [switch]$Overwrite,
        [string[]]$Event,
        [string[]]$OutputColumn,
        [string]$Filter,
        [switch]$EnableException
    )

    begin {
        try {
            Add-Type -Path "$script:PSModuleRoot\bin\XESmartTarget\XESmartTarget.Core.dll" -ErrorAction Stop
        } catch {
            Stop-Function -Message "Could not load XESmartTarget.Core.dll" -ErrorRecord $_ -Target "XESmartTarget"
            return
        }
    }
    process {
        if (Test-FunctionInterrupt) { return }

        if ($Pscmdlet.ShouldProcess("Creating new XESmartCsvWriter Object")) {
            try {
                $writer = New-Object -TypeName XESmartTarget.Core.Responses.CsvAppenderResponse
                $writer.OutputFile = $OutputFile
                $writer.OverWrite = $Overwrite
                if (Test-Bound -ParameterName "Event") {
                    $writer.Events = $Event
                }
                if (Test-Bound -ParameterName "OutputColumn") {
                    $writer.OutputColumns = $OutputColumn
                }
                if (Test-Bound -ParameterName "Filter") {
                    $writer.Filter = $Filter
                }
                $writer
            } catch {
                Stop-Function -Message "Failure" -ErrorRecord $_ -Target "XESmartTarget" -Continue
            }
        }
    }
}

tools\dbatools\functions\New-DbaXESmartEmail.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function New-DbaXESmartEmail {
    <#
    .SYNOPSIS
        This response type can be used to send an email each time an event is captured.

    .DESCRIPTION
        This response type can be used to send an email each time an event is captured.

    .PARAMETER SmtpServer
        Address of the SMTP server for outgoing mail.

    .PARAMETER Sender
        Sender's email address.

    .PARAMETER To
        Address of the To recipient(s).

    .PARAMETER Cc
        Address of the Cc recipient(s).

    .PARAMETER Bcc
        Address of the Bcc recipient(s).

    .PARAMETER Credential
        Credential object containing username and password used to authenticate on the SMTP server. When blank, no authentication is performed.

    .PARAMETER Subject
        Subject of the mail message. Accepts placeholders in the text.

        Placeholders are in the form {PropertyName}, where PropertyName is one of the fields or actions available in the Event object.

        For instance, a valid Subject in a configuration file looks like this: "An event of name {Name} occurred at {collection_time}"

    .PARAMETER Body
        Body of the mail message. The body can be static text or any property taken from the underlying event. See Subject for a description of how placeholders work.

    .PARAMETER Attachment
        Data to attach to the email message. At this time, it can be any of the fields/actions of the underlying event. The data from the field/action is attached to the message as an ASCII stream. A single attachment is supported.

    .PARAMETER AttachmentFileName
        File name to assign to the attachment.

    .PARAMETER PlainText
        If this switch is enabled, the email will be sent in plain text. By default, HTML formatting is used.

    .PARAMETER Event
        Each Response can be limited to processing specific events, while ignoring all the other ones. When this attribute is omitted, all events are processed.

    .PARAMETER Filter
        You can specify a filter expression by using this attribute. The filter expression is in the same form that you would use in a SQL query. For example, a valid example looks like this: duration > 10000 AND cpu_time > 10000

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: ExtendedEvent, XE, XEvent
        Author: Chrissy LeMaire (@cl) | SmartTarget by Gianluca Sartori (@spaghettidba)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/New-DbaXESmartEmail

    .EXAMPLE
        PS C:\> $params = @{
        >> SmtpServer = "smtp.ad.local"
        >> To = "[email protected]"
        >> Sender = "[email protected]"
        >> Subject = "Query executed"
        >> Body = "Query executed at {collection_time}"
        >> Attachment = "batch_text"
        >> AttachmentFileName = "query.sql"
        >> }
        >>
        PS C:\> $emailresponse = New-DbaXESmartEmail @params
        PS C:\> Start-DbaXESmartTarget -SqlInstance sql2017 -Session querytracker -Responder $emailresponse

        Sends an email each time a querytracker event is captured.

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [parameter(Mandatory)]
        [string]$SmtpServer,
        [parameter(Mandatory)]
        [string]$Sender,
        [parameter(Mandatory)]
        [string[]]$To,
        [string[]]$Cc,
        [string[]]$Bcc,
        [pscredential]$Credential,
        [parameter(Mandatory)]
        [string]$Subject,
        [parameter(Mandatory)]
        [string]$Body,
        [string]$Attachment,
        [string]$AttachmentFileName,
        [string]$PlainText,
        [string[]]$Event,
        [string]$Filter,
        [switch]$EnableException
    )
    begin {
        try {
            Add-Type -Path "$script:PSModuleRoot\bin\XESmartTarget\XESmartTarget.Core.dll" -ErrorAction Stop
        } catch {
            Stop-Function -Message "Could not load XESmartTarget.Core.dll." -ErrorRecord $_ -Target "XESmartTarget"
            return
        }
    }
    process {
        if (Test-FunctionInterrupt) { return }

        if ($Pscmdlet.ShouldProcess("Creating new XESmartEmail Object")) {
            try {
                $email = New-Object -TypeName XESmartTarget.Core.Responses.EmailResponse
                $email.SmtpServer = $SmtpServer
                $email.Sender = $Sender
                $email.To = $To
                $email.Cc = $Cc
                $email.Bcc = $Bcc
                $email.Subject = $Subject
                $email.Body = $Body
                $email.Attachment = $Attachment
                $email.AttachmentFileName = $AttachmentFileName
                $email.HTMLFormat = ($PlainText -eq $false)
                if (Test-Bound -ParameterName "Event") {
                    $email.Events = $Event
                }
                if (Test-Bound -ParameterName "Filter") {
                    $email.Filter = $Filter
                }

                if ($Credential) {
                    $email.UserName = $Credential.UserName
                    $email.Password = $Credential.GetNetworkCredential().Password
                }

                $email
            } catch {
                Stop-Function -Message "Failure" -ErrorRecord $_ -Target "XESmartTarget" -Continue
            }
        }
    }
}

tools\dbatools\functions\New-DbaXESmartQueryExec.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function New-DbaXESmartQueryExec {
    <#
    .SYNOPSIS
        This response type executes a T-SQL command against a target database whenever an event is recorded.

    .DESCRIPTION
        This response type executes a T-SQL command against a target database whenever an event is recorded.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2008 or higher.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        Specifies the name of the database that contains the target table.

    .PARAMETER Query
        The T-SQL command to execute. This string can contain placeholders for properties taken from the events.

        Placeholders are in the form {PropertyName}, where PropertyName is one of the fields or actions available in the Event object.

    .PARAMETER Event
        Each Response can be limited to processing specific events, while ignoring all the other ones. When this attribute is omitted, all events are processed.

    .PARAMETER Filter
        You can specify a filter expression by using this attribute. The filter expression is in the same form that you would use in a SQL query. For example, a valid example looks like this: duration > 10000 AND cpu_time > 10000

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: ExtendedEvent, XE, XEvent
        Author: Chrissy LeMaire (@cl) | SmartTarget by Gianluca Sartori (@spaghettidba)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/New-DbaXESmartQueryExec

    .EXAMPLE
        PS C:\> $response = New-DbaXESmartQueryExec -SqlInstance sql2017 -Database dbadb -Query "update table set whatever = 1"
        PS C:\> Start-DbaXESmartTarget -SqlInstance sql2017 -Session deadlock_tracker -Responder $response

        Executes a T-SQL command against dbadb on sql2017 whenever a deadlock event is recorded.

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string]$Database,
        [string]$Query,
        [switch]$EnableException,
        [string[]]$Event,
        [string]$Filter
    )
    begin {
        try {
            Add-Type -Path "$script:PSModuleRoot\XESmartTarget\XESmartTarget.Core.dll" -ErrorAction Stop
        } catch {
            Stop-Function -Message "Could not load XESmartTarget.Core.dll" -ErrorRecord $_ -Target "XESmartTarget"
            return
        }
    }
    process {
        if (Test-FunctionInterrupt) {
            return
        }

        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 11
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            if ($Pscmdlet.ShouldProcess($instance, "Creating new XESmartQueryExec")) {
                $execute = New-Object -TypeName XESmartTarget.Core.Responses.ExecuteTSQLResponse
                $execute.ServerName = $server.Name
                $execute.DatabaseName = $Database
                $execute.TSQL = $Query

                if ($SqlCredential) {
                    $execute.UserName = $SqlCredential.UserName
                    $execute.Password = $SqlCredential.GetNetworkCredential().Password
                }

                if (Test-Bound -ParameterName "Event") {
                    $execute.Events = $Event
                }
                if (Test-Bound -ParameterName "Filter") {
                    $execute.Filter = $Filter
                }

                $execute
            }
        }
    }
}

tools\dbatools\functions\New-DbaXESmartReplay.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function New-DbaXESmartReplay {
    <#
    .SYNOPSIS
        This response type can be used to replay execution related events to a target SQL Server instance.

    .DESCRIPTION
        This response type can be used to replay execution related events to a target SQL Server instance. The events that you can replay are of the type sql_batch_completed and rpc_completed: all other events are ignored.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2008 or higher.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        Name of the initial catalog to connect to. Statements will be replayed by changing database to the same database where the event was originally captured, so this property only controls the initial database to connect to.

    .PARAMETER Event
        Each Response can be limited to processing specific events, while ignoring all the other ones. When this attribute is omitted, all events are processed.

    .PARAMETER Filter
        Specifies a filter expression in the same form as you would use in the WHERE clause of a SQL query.

        Example: duration > 10000 AND cpu_time > 10000

    .PARAMETER DelaySeconds
        Specifies the duration of the delay in seconds.

    .PARAMETER ReplayIntervalSeconds
        Specifies the duration of the replay interval in seconds.

    .PARAMETER StopOnError
        If this switch is enabled, the replay will be stopped when the first error is encountered. By default, error messages are piped to the log and console output, and replay proceeds.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: ExtendedEvent, XE, XEvent
        Author: Chrissy LeMaire (@cl) | SmartTarget by Gianluca Sartori (@spaghettidba)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/New-DbaXESmartReplay

    .EXAMPLE
        PS C:\> $response = New-DbaXESmartReplay -SqlInstance sql2017 -Database planning
        PS C:\> Start-DbaXESmartTarget -SqlInstance sql2016 -Session loadrelay -Responder $response

        Replays events from sql2016 on sql2017 in the planning database. Returns a PowerShell job object.

        To see a list of all SmartTarget job objects, use Get-DbaXESmartTarget.

    .EXAMPLE
        PS C:\> $response = New-DbaXESmartReplay -SqlInstance sql2017 -Database planning
        PS C:\> Start-DbaXESmartTarget -SqlInstance sql2017 -Session 'Profiler Standard' -Responder $response -NotAsJob

        Replays events from the 'Profiler Standard' session on sql2016 to sql2017's planning database. Does not run as a job so you can see the raw output.

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string]$Database,
        [string[]]$Event = "sql_batch_completed",
        [string]$Filter,
        [int]$DelaySeconds,
        [switch]$StopOnError,
        [int]$ReplayIntervalSeconds,
        [switch]$EnableException
    )
    begin {
        try {
            Add-Type -Path "$script:PSModuleRoot\bin\XESmartTarget\XESmartTarget.Core.dll" -ErrorAction Stop
        } catch {
            Stop-Function -Message "Could not load XESmartTarget.Core.dll" -ErrorRecord $_ -Target "XESmartTarget"
            return
        }
    }
    process {
        if (Test-FunctionInterrupt) { return }

        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 11
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }
            if ($Pscmdlet.ShouldProcess($instance, "Creating new XESmartReply")) {
                Write-Message -Message "Making a New XE SmartReplay for $Event against $instance running on $($server.name)" -Level Verbose
                try {
                    $replay = New-Object -TypeName XESmartTarget.Core.Responses.ReplayResponse
                    $replay.ServerName = $instance
                    $replay.DatabaseName = $Database
                    $replay.Events = $Event
                    $replay.StopOnError = $StopOnError
                    $replay.Filter = $Filter
                    $replay.DelaySeconds = $DelaySeconds
                    $replay.ReplayIntervalSeconds = $ReplayIntervalSeconds

                    if ($SqlCredential) {
                        $replay.UserName = $SqlCredential.UserName
                        $replay.Password = $SqlCredential.GetNetworkCredential().Password
                    }

                    $replay
                } catch {
                    $message = $_.Exception.InnerException.InnerException | Out-String
                    Stop-Function -Message $message -Target "XESmartTarget" -Continue
                }
            }
        }
    }
}

tools\dbatools\functions\New-DbaXESmartTableWriter.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function New-DbaXESmartTableWriter {
    <#
    .SYNOPSIS
        This response type is used to write Extended Events to a database table.

    .DESCRIPTION
        This response type is used to write Extended Events to a database table. The events are temporarily stored in memory before being written to the database at regular intervals.

        The target table can be created manually upfront or you can let the TableAppenderResponse create a target table based on the fields and actions available in the events captured.

        The columns of the target table and the fields/actions of the events are mapped by name (case-sensitive).

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2008 or higher.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        Specifies the name of the database that contains the target table.

    .PARAMETER Table
        Specifies the name of the target table.

    .PARAMETER AutoCreateTargetTable
        If this switch is enabled, XESmartTarget will infer the definition of the target table from the columns captured in the Extended Events session.

        If the target table already exists, it will not be recreated.

    .PARAMETER UploadIntervalSeconds
        Specifies the number of seconds XESmartTarget will keep the events in memory before dumping them to the target table. The default is 10 seconds.

    .PARAMETER OutputColumn
        Specifies the list of columns to output from the events. XESmartTarget will capture in memory and write to the target table only the columns (fields or targets) that are present in this list.

        Fields and actions are matched in a case-sensitive manner.

        Expression columns are supported. Specify a column with ColumnName AS Expression to add an expression column (Example: Total AS Reads + Writes)

    .PARAMETER Event
        Specifies a list of events to be processed (with others being ignored. By default, all events are processed.

    .PARAMETER Filter
        Specifies a filter expression in the same form as you would use in the WHERE clause of a SQL query.

        Example: duration > 10000 AND cpu_time > 10000

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: ExtendedEvent, XE, XEvent
        Author: Chrissy LeMaire (@cl) | SmartTarget by Gianluca Sartori (@spaghettidba)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT
        SmartTarget: by Gianluca Sartori (@spaghettidba)

    .LINK
        https://dbatools.io/New-DbaXESmartTableWriter

    .EXAMPLE
        PS C:\> $columns = "cpu_time", "duration", "physical_reads", "logical_reads", "writes", "row_count", "batch_text"
        PS C:\> $response = New-DbaXESmartTableWriter -SqlInstance sql2017 -Database dbadb -Table deadlocktracker -OutputColumn $columns -Filter "duration > 10000"
        PS C:\> Start-DbaXESmartTarget -SqlInstance sql2017 -Session deadlock_tracker -Responder $response

        Writes Extended Events to the deadlocktracker table in dbadb on sql2017.

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [parameter(Mandatory)]
        [string]$Database,
        [parameter(Mandatory)]
        [string]$Table,
        [switch]$AutoCreateTargetTable,
        [int]$UploadIntervalSeconds = 10,
        [string[]]$Event,
        [string[]]$OutputColumn,
        [string]$Filter,
        [switch]$EnableException
    )
    begin {
        try {
            Add-Type -Path "$script:PSModuleRoot\bin\XESmartTarget\XESmartTarget.Core.dll" -ErrorAction Stop
        } catch {
            Stop-Function -Message "Could not load XESmartTarget.Core.dll" -ErrorRecord $_ -Target "XESmartTarget"
            return
        }
    }
    process {
        if (Test-FunctionInterrupt) { return }

        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 11
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }
            if ($Pscmdlet.ShouldProcess($instance, "Creating new XESmartTableWriter")) {
                try {
                    $writer = New-Object -TypeName XESmartTarget.Core.Responses.TableAppenderResponse
                    $writer.ServerName = $server.Name
                    $writer.DatabaseName = $Database
                    $writer.TableName = $Table
                    $writer.AutoCreateTargetTable = $AutoCreateTargetTable
                    $writer.UploadIntervalSeconds = $UploadIntervalSeconds
                    if (Test-Bound -ParameterName "Event") {
                        $writer.Events = $Event
                    }
                    if (Test-Bound -ParameterName "OutputColumn") {
                        $writer.OutputColumns = $OutputColumn
                    }
                    if (Test-Bound -ParameterName "Filter") {
                        $writer.Filter = $Filter
                    }
                    $writer
                } catch {
                    Stop-Function -Message "Failure" -ErrorRecord $_ -Target "XESmartTarget" -Continue
                }
            }
        }
    }
}

tools\dbatools\functions\Publish-DbaDacPackage.ps1

function Publish-DbaDacPackage {
    <#
    .SYNOPSIS
        The Publish-DbaDacPackage command takes a dacpac which is the output from an SSDT project and publishes it to a database. Changing the schema to match the dacpac and also to run any scripts in the dacpac (pre/post deploy scripts).

    .DESCRIPTION
        Deploying a dacpac uses the DacFx which historically needed to be installed on a machine prior to use. In 2016 the DacFx was supplied by Microsoft as a nuget package (Microsoft.Data.Tools.MSBuild) and this uses that nuget package.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Path
        Specifies the filesystem path to the DACPAC

    .PARAMETER PublishXml
        Specifies the publish profile which will include options and sqlCmdVariables.

    .PARAMETER Database
        Specifies the name of the database being published.

    .PARAMETER ConnectionString
        Specifies the connection string to the database you are upgrading. This is not required if SqlInstance is specified.

    .PARAMETER GenerateDeploymentScript
        If this switch is enabled, the publish script will be generated.

    .PARAMETER GenerateDeploymentReport
        If this switch is enabled, the publish XML report  will be generated.

    .PARAMETER Type
        Selecting the type of the export: Dacpac (default) or Bacpac.

    .PARAMETER DacOption
        Export options for a corresponding export type. Can be created by New-DbaDacOption -Type Dacpac | Bacpac

    .PARAMETER OutputPath
        Specifies the filesystem path (directory) where output files will be generated.

    .PARAMETER ScriptOnly
        If this switch is enabled, only the change scripts will be generated.

    .PARAMETER IncludeSqlCmdVars
        If this switch is enabled, SqlCmdVars in publish.xml will have their values overwritten.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER DacFxPath
        Path to the dac dll. If this is ommited, then the version of dac dll which is packaged with dbatools is used.

    .NOTES
        Tags: Migration, Database, Dacpac
        Author: Richie lee (@richiebzzzt)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Publish-DbaDacPackage

    .EXAMPLE
        PS C:\> $options = New-DbaDacOption -Type Dacpac -Action Publish
        PS C:\> $options.DeployOptions.DropObjectsNotInSource = $true
        PS C:\> Publish-DbaDacPackage -SqlInstance sql2016 -Database DB1 -DacOption $options -Path c:\temp\db.dacpac

        Uses DacOption object to set Deployment Options and updates DB1 database on sql2016 from the db.dacpac dacpac file, dropping objects that are missing from source

    .EXAMPLE
        PS C:\> Publish-DbaDacPackage -SqlInstance sql2017 -Database WideWorldImporters -Path C:\temp\sql2016-WideWorldImporters.dacpac -PublishXml C:\temp\sql2016-WideWorldImporters-publish.xml

        Updates WideWorldImporters on sql2017 from the sql2016-WideWorldImporters.dacpac using the sql2016-WideWorldImporters-publish.xml publish profile

    .EXAMPLE
        PS C:\> New-DbaDacProfile -SqlInstance sql2016 -Database db2 -Path C:\temp
        PS C:\> Export-DbaDacPackage -SqlInstance sql2016 -Database db2 | Publish-DbaDacPackage -PublishXml C:\temp\sql2016-db2-publish.xml -Database db1, db2 -SqlInstance sql2017

        Creates a publish profile at C:\temp\sql2016-db2-publish.xml, exports the .dacpac to $home\Documents\sql2016-db2.dacpac
        then publishes it to the sql2017 server database db2

    .EXAMPLE
        PS C:\> $loc = "C:\Users\bob\source\repos\Microsoft.Data.Tools.Msbuild\lib\net46\Microsoft.SqlServer.Dac.dll"
        PS C:\> Publish-DbaDacPackage -SqlInstance "local" -Database WideWorldImporters -Path C:\temp\WideWorldImporters.dacpac -PublishXml C:\temp\WideWorldImporters.publish.xml -DacFxPath $loc

    .EXAMPLE
        PS C:\> Publish-DbaDacPackage -SqlInstance sql2017 -Database WideWorldImporters -Path C:\temp\sql2016-WideWorldImporters.dacpac -PublishXml C:\temp\sql2016-WideWorldImporters-publish.xml -GenerateDeploymentScript -ScriptOnly

        Does not deploy the changes, but will generate the deployment script that would be executed against WideWorldImporters.

    .EXAMPLE
        PS C:\> Publish-DbaDacPackage -SqlInstance sql2017 -Database WideWorldImporters -Path C:\temp\sql2016-WideWorldImporters.dacpac -PublishXml C:\temp\sql2016-WideWorldImporters-publish.xml -GenerateDeploymentReport -ScriptOnly

        Does not deploy the changes, but will generate the deployment report that would be executed against WideWorldImporters.
    #>
    [CmdletBinding(DefaultParameterSetName = 'Obj')]
    param (
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstance[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [Parameter(Mandatory, ValueFromPipelineByPropertyName)]
        [string]$Path,
        [Parameter(Mandatory, ParameterSetName = 'Xml')]
        [string]$PublishXml,
        [Parameter(Mandatory, ValueFromPipelineByPropertyName)]
        [string[]]$Database,
        [string[]]$ConnectionString,
        [parameter(ParameterSetName = 'Xml')]
        [switch]$GenerateDeploymentScript,
        [parameter(ParameterSetName = 'Xml')]
        [switch]$GenerateDeploymentReport,
        [Switch]$ScriptOnly,
        [ValidateSet('Dacpac', 'Bacpac')]
        [string]$Type = 'Dacpac',
        [string]$OutputPath = "$home\Documents",
        [switch]$IncludeSqlCmdVars,
        [Parameter(ParameterSetName = 'Obj')]
        [Alias("Option")]
        [object]$DacOption,
        [switch]$EnableException,
        [String]$DacFxPath
    )

    begin {
        if ((Test-Bound -Not -ParameterName SqlInstance) -and (Test-Bound -Not -ParameterName ConnectionString)) {
            Stop-Function -Message "You must specify either SqlInstance or ConnectionString."
            return
        }
        if ($Type -eq 'Dacpac') {
            if ((Test-Bound -ParameterName GenerateDeploymentScript) -or (Test-Bound -ParameterName GenerateDeploymentReport)) {
                $defaultcolumns = 'ComputerName', 'InstanceName', 'SqlInstance', 'Database', 'Dacpac', 'PublishXml', 'Result', 'DatabaseScriptPath', 'MasterDbScriptPath', 'DeploymentReport', 'DeployOptions', 'SqlCmdVariableValues'
            } else {
                $defaultcolumns = 'ComputerName', 'InstanceName', 'SqlInstance', 'Database', 'Dacpac', 'PublishXml', 'Result', 'DeployOptions', 'SqlCmdVariableValues'
            }
        } elseif ($Type -eq 'Bacpac') {
            if ($ScriptOnly -or $GenerateDeploymentReport -or $GenerateDeploymentScript) {
                Stop-Function -Message "ScriptOnly, GenerateDeploymentScript, and GenerateDeploymentReport cannot be used in a Bacpac scenario." -ErrorRecord $_
                return
            }
            $defaultcolumns = 'ComputerName', 'InstanceName', 'SqlInstance', 'Database', 'Bacpac', 'Result', 'DeployOptions'
        }

        if ((Test-Bound -ParameterName ScriptOnly) -and (Test-Bound -Not -ParameterName GenerateDeploymentScript) -and (Test-Bound -Not -ParameterName GenerateDeploymentScript)) {
            Stop-Function -Message "You must at least one of GenerateDeploymentScript or GenerateDeploymentReport when using ScriptOnly"
            return
        }

        function Get-ServerName ($connstring) {
            $builder = New-Object System.Data.Common.DbConnectionStringBuilder
            $builder.set_ConnectionString($connstring)
            $instance = $builder['data source']

            if (-not $instance) {
                $instance = $builder['server']
            }

            return $instance.ToString().Replace('\', '-').Replace('(', '').Replace(')', '')
        }
        
        if ((Test-Bound -Not -ParameterName 'DacfxPath') -and (-not $script:core)) {
            $dacfxPath = "$script:PSModuleRoot\bin\smo\Microsoft.SqlServer.Dac.dll"
            
            if ((Test-Path $dacfxPath) -eq $false) {
                Stop-Function -Message 'No usable version of Dac Fx found.' -EnableException $EnableException
                return
            } else {
                try {
                    Add-Type -Path $dacfxPath
                    Write-Message -Level Verbose -Message "Dac Fx loaded."
                } catch {
                    Stop-Function -Message 'No usable version of Dac Fx found.' -EnableException $EnableException -ErrorRecord $_
                }
            }
        }
        
        #Check Option object types - should have a specific type
        if ($Type -eq 'Dacpac') {
            if ($DacOption -and $DacOption -isnot [Microsoft.SqlServer.Dac.PublishOptions]) {
                Stop-Function -Message "Microsoft.SqlServer.Dac.PublishOptions object type is expected - got $($DacOption.GetType())."
                return
            }
        } elseif ($Type -eq 'Bacpac') {
            if ($DacOption -and $DacOption -isnot [Microsoft.SqlServer.Dac.DacImportOptions]) {
                Stop-Function -Message "Microsoft.SqlServer.Dac.DacImportOptions object type is expected - got $($DacOption.GetType())."
                return
            }
        }
    }

    process {
        if (Test-FunctionInterrupt) { return }

        if (-not (Test-Path -Path $Path)) {
            Stop-Function -Message "$Path not found!"
            return
        }

        if ($PsCmdlet.ParameterSetName -eq 'Xml') {
            if (-not (Test-Path -Path $PublishXml)) {
                Stop-Function -Message "$PublishXml not found!"
                return
            }
        }

        foreach ($instance in $sqlinstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure." -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }
            $ConnectionString += $server.ConnectionContext.ConnectionString.Replace('"', "'")
        }

        #Use proper class to load the object
        if ($Type -eq 'Dacpac') {
            try {
                $dacPackage = [Microsoft.SqlServer.Dac.DacPackage]::Load($Path)
            } catch {
                Stop-Function -Message "Could not load Dacpac." -ErrorRecord $_
                return
            }
        } elseif ($Type -eq 'Bacpac') {
            try {
                $bacPackage = [Microsoft.SqlServer.Dac.BacPackage]::Load($Path)
            } catch {
                Stop-Function -Message "Could not load Bacpac." -ErrorRecord $_
                return
            }
        }
        #Load XML profile when used
        if ($PsCmdlet.ParameterSetName -eq 'Xml') {
            try {
                $options = New-DbaDacOption -Type $Type -Action Publish -PublishXml $PublishXml -EnableException
            } catch {
                Stop-Function -Message "Could not load profile." -ErrorRecord $_
                return
            }
        }
        #Create/re-use deployment options object
        elseif ($PsCmdlet.ParameterSetName -eq 'Obj') {
            if (!$DacOption) {
                $options = New-DbaDacOption -Type $Type -Action Publish
            } else {
                $options = $DacOption
            }
        }
        #Replace variables if defined
        if ($IncludeSqlCmdVars) {
            Get-SqlCmdVars -SqlCommandVariableValues $options.DeployOptions.SqlCommandVariableValues
        }

        foreach ($connstring in $ConnectionString) {
            $cleaninstance = Get-ServerName $connstring
            $instance = $cleaninstance.ToString().Replace('--', '\')

            foreach ($dbname in $database) {
                #Set deployment properties when specified
                if (Test-Bound -ParameterName GenerateDeploymentScript) {
                    $options.GenerateDeploymentScript = $GenerateDeploymentScript
                }
                if (Test-Bound -ParameterName GenerateDeploymentReport) {
                    $options.GenerateDeploymentReport = $GenerateDeploymentReport
                }
                #Set output file paths when needed
                $timeStamp = (Get-Date).ToString("yyMMdd_HHmmss_f")
                if ($GenerateDeploymentScript) {
                    $options.DatabaseScriptPath = Join-Path $OutputPath "$cleaninstance-$dbname`_DeployScript_$timeStamp.sql"
                    $options.MasterDbScriptPath = Join-Path $OutputPath "$cleaninstance-$dbname`_Master.DeployScript_$timeStamp.sql"
                }
                if ($connstring -notmatch 'Database=') {
                    $connstring = "$connstring;Database=$dbname"
                }

                #Create services object
                try {
                    $dacServices = New-Object Microsoft.SqlServer.Dac.DacServices $connstring
                } catch {
                    Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $server -Continue
                }
                try {
                    $null = $output = Register-ObjectEvent -InputObject $dacServices -EventName "Message" -SourceIdentifier "msg" -Action { $EventArgs.Message.Message }
                    #Perform proper action depending on the Type
                    if ($Type -eq 'Dacpac') {
                        if ($ScriptOnly) {
                            if (!$options.GenerateDeploymentScript) {
                                Stop-Function -Message "GenerateDeploymentScript option should be specified when running with -ScriptOnly" -EnableException $true
                            }
                            if (!$options.DatabaseScriptPath) {
                                Stop-Function -Message "DatabaseScriptPath option should be specified when running with -ScriptOnly" -EnableException $true
                            }
                            Write-Message -Level Verbose -Message "Generating script."
                            $result = $dacServices.Script($dacPackage, $dbname, $options)
                        } else {
                            Write-Message -Level Verbose -Message "Executing Dacpac publish."
                            $result = $dacServices.Publish($dacPackage, $dbname, $options)
                        }
                    } elseif ($Type -eq 'Bacpac') {
                        Write-Message -Level Verbose -Message "Executing Bacpac import."
                        $dacServices.ImportBacpac($bacPackage, $dbname, $options, $null)
                    }
                } catch [Microsoft.SqlServer.Dac.DacServicesException] {
                    Stop-Function -Message "Deployment failed" -ErrorRecord $_ -Continue
                } finally {
                    Unregister-Event -SourceIdentifier "msg"
                    if ($options.GenerateDeploymentReport) {
                        $deploymentReport = Join-Path $OutputPath "$cleaninstance-$dbname`_Result.DeploymentReport_$timeStamp.xml"
                        $result.DeploymentReport | Out-File $deploymentReport
                        Write-Message -Level Verbose -Message "Deployment Report - $deploymentReport."
                    }
                    if ($options.GenerateDeploymentScript) {
                        Write-Message -Level Verbose -Message "Database change script - $($options.DatabaseScriptPath)."
                        if ((Test-Path $options.MasterDbScriptPath)) {
                            Write-Message -Level Verbose -Message "Master database change script - $($result.MasterDbScript)."
                        }
                    }
                    $resultoutput = ($output.output -join "`r`n" | Out-String).Trim()
                    if ($resultoutput -match "Failed" -and ($options.GenerateDeploymentReport -or $options.GenerateDeploymentScript)) {
                        Write-Message -Level Warning -Message "Seems like the attempt to publish/script may have failed. If scripts have not generated load dacpac into Visual Studio to check SQL is valid."
                    }
                    $server = [dbainstance]$instance
                    if ($Type -eq 'Dacpac') {
                        $output = [pscustomobject]@{
                            ComputerName         = $server.ComputerName
                            InstanceName         = $server.InstanceName
                            SqlInstance          = $server.FullName
                            Database             = $dbname
                            Result               = $resultoutput
                            Dacpac               = $Path
                            PublishXml           = $PublishXml
                            ConnectionString     = $connstring
                            DatabaseScriptPath   = $options.DatabaseScriptPath
                            MasterDbScriptPath   = $options.MasterDbScriptPath
                            DeploymentReport     = $DeploymentReport
                            DeployOptions        = $options.DeployOptions | Select-Object -Property * -ExcludeProperty "SqlCommandVariableValues"
                            SqlCmdVariableValues = $options.DeployOptions.SqlCommandVariableValues.Keys
                        }
                    } elseif ($Type -eq 'Bacpac') {
                        $output = [pscustomobject]@{
                            ComputerName     = $server.ComputerName
                            InstanceName     = $server.InstanceName
                            SqlInstance      = $server.FullName
                            Database         = $dbname
                            Result           = $resultoutput
                            Bacpac           = $Path
                            ConnectionString = $connstring
                            DeployOptions    = $options
                        }
                    }
                    $output | Select-DefaultView -Property $defaultcolumns
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Publish-DbaDacpac
    }
}

tools\dbatools\functions\Read-DbaAuditFile.ps1

function Read-DbaAuditFile {
    <#
    .SYNOPSIS
        Read Audit details from *.sqlaudit files.

    .DESCRIPTION
        Read Audit details from *.sqlaudit files.

    .PARAMETER Path
        The path to the *.sqlaudit file. This is relative to the computer executing the command. UNC paths are supported.

    .PARAMETER Exact
        If this switch is enabled, only an exact search will be used for the Path. By default, this command will add a wildcard to the Path because Eventing uses the file name as a template and adds characters.

    .PARAMETER Raw
        If this switch is enabled, the Microsoft.SqlServer.XEvent.Linq.PublishedEvent enumeration object will be returned.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: ExtendedEvent, Audit
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Read-DbaAuditFile

    .EXAMPLE
        PS C:\> Read-DbaAuditFile -Path C:\temp\logins.sqlaudit

        Returns events from C:\temp\logins.sqlaudit.

    .EXAMPLE
        PS C:\> Get-ChildItem C:\temp\audit\*.sqlaudit | Read-DbaAuditFile

        Returns events from all .sqlaudit files in C:\temp\audit.

    .EXAMPLE
        PS C:\> Get-DbaServerAudit -SqlInstance sql2014 -Audit LoginTracker | Read-DbaAuditFile

        Reads remote Audit details by accessing the file over the admin UNC share.

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias('FullName')]
        [object[]]$Path,
        [switch]$Exact,
        [switch]$Raw,
        [switch]$EnableException
    )
    process {
        foreach ($file in $path) {
            # in order to ensure CSV gets all fields, all columns will be
            # collected and output in the first (all all subsequent) object
            $columns = @("name", "timestamp")

            if ($file -is [System.String]) {
                $currentfile = $file
                #Variable marked as unused by PSScriptAnalyzer
                #$manualadd = $true
            } elseif ($file -is [System.IO.FileInfo]) {
                $currentfile = $file.FullName
                #Variable marked as unused by PSScriptAnalyzer
                #$manualadd = $true
            } else {
                if ($file -isnot [Microsoft.SqlServer.Management.Smo.Audit]) {
                    Stop-Function -Message "Unsupported file type."
                    return
                }

                if ($file.FullName.Length -eq 0) {
                    Stop-Function -Message "This Audit does not have an associated file."
                    return
                }

                $instance = [dbainstance]$file.ComputerName

                if ($instance.IsLocalHost) {
                    $currentfile = $file.FullName
                } else {
                    $currentfile = $file.RemoteFullName
                }
            }

            if (-not $Exact) {
                $currentfile = $currentfile.Replace('.sqlaudit', '*.sqlaudit')

                if ($currentfile -notmatch "sqlaudit") {
                    $currentfile = "$currentfile*.sqlaudit"
                }
            }

            $accessible = Test-Path -Path $currentfile
            $whoami = whoami

            if (-not $accessible) {
                if ($file.Status -eq "Stopped") { continue }
                Stop-Function -Continue -Message "$currentfile cannot be accessed from $($env:COMPUTERNAME). Does $whoami have access?"
            }

            if ($raw) {
                return New-Object Microsoft.SqlServer.XEvent.Linq.QueryableXEventData($currentfile)
            }

            $enum = New-Object Microsoft.SqlServer.XEvent.Linq.QueryableXEventData($currentfile)
            $newcolumns = ($enum.Fields.Name | Select-Object -Unique)

            $actions = ($enum.Actions.Name | Select-Object -Unique)
            foreach ($action in $actions) {
                $newcolumns += ($action -Split '\.')[-1]
            }

            $newcolumns = $newcolumns | Sort-Object
            $columns = ($columns += $newcolumns) | Select-Object -Unique

            # Make it selectable, otherwise it's a weird enumeration
            foreach ($event in (New-Object Microsoft.SqlServer.XEvent.Linq.QueryableXEventData($currentfile))) {
                $hash = [ordered]@{ }

                foreach ($column in $columns) {
                    $null = $hash.Add($column, $event.$column)
                }

                foreach ($action in $event.Actions) {
                    $hash[$action.Name] = $action.Value
                }

                foreach ($field in $event.Fields) {
                    $hash[$field.Name] = $field.Value
                }

                [pscustomobject]$hash
            }
        }
    }
}

tools\dbatools\functions\Read-DbaBackupHeader.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Read-DbaBackupHeader {
    <#
    .SYNOPSIS
        Reads and displays detailed information about a SQL Server backup.

    .DESCRIPTION
        Reads full, differential and transaction log backups. An online SQL Server is required to parse the backup files and the path specified must be relative to that SQL Server.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Path
        Path to SQL Server backup file. This can be a full, differential or log backup file. Accepts valid filesystem paths and URLs.

    .PARAMETER Simple
        If this switch is enabled, fewer columns are returned, giving an easy overview.

    .PARAMETER FileList
        If this switch is enabled, detailed information about the files within the backup is returned.

    .PARAMETER AzureCredential
        Name of the SQL Server credential that should be used for Azure storage access.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message. This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: DisasterRecovery, Backup, Restore
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Read-DbaBackupHeader

    .EXAMPLE
        PS C:\> Read-DbaBackupHeader -SqlInstance sql2016 -Path S:\backups\mydb\mydb.bak

        Logs into sql2016 using Windows authentication and reads the local file on sql2016, S:\backups\mydb\mydb.bak.

        If you are running this command on a workstation and connecting remotely, remember that sql2016 cannot access files on your own workstation.

    .EXAMPLE
        PS C:\> Read-DbaBackupHeader -SqlInstance sql2016 -Path \\nas\sql\backups\mydb\mydb.bak, \\nas\sql\backups\otherdb\otherdb.bak

        Logs into sql2016 and reads two backup files - mydb.bak and otherdb.bak. The SQL Server service account must have rights to read this file.

    .EXAMPLE
        PS C:\> Read-DbaBackupHeader -SqlInstance . -Path C:\temp\myfile.bak -Simple

        Logs into the local workstation (or computer) and shows simplified output about C:\temp\myfile.bak. The SQL Server service account must have rights to read this file.

    .EXAMPLE
        PS C:\> $backupinfo = Read-DbaBackupHeader -SqlInstance . -Path C:\temp\myfile.bak
        PS C:\> $backupinfo.FileList

        Displays detailed information about each of the datafiles contained in the backupset.

    .EXAMPLE
        PS C:\> Read-DbaBackupHeader -SqlInstance . -Path C:\temp\myfile.bak -FileList

        Also returns detailed information about each of the datafiles contained in the backupset.

    .EXAMPLE
        PS C:\> "C:\temp\myfile.bak", "\backupserver\backups\myotherfile.bak" | Read-DbaBackupHeader -SqlInstance sql2016  | Where-Object { $_.BackupSize.Megabyte -gt 100 }

        Reads the two files and returns only backups larger than 100 MB

    .EXAMPLE
        PS C:\> Get-ChildItem \\nas\sql\*.bak | Read-DbaBackupHeader -SqlInstance sql2016

        Gets a list of all .bak files on the \\nas\sql share and reads the headers using the server named "sql2016". This means that the server, sql2016, must have read access to the \\nas\sql share.

    .EXAMPLE
        PS C:\> Read-DbaBackupHeader -Path https://dbatoolsaz.blob.core.windows.net/azbackups/restoretime/restoretime_201705131850.bak -AzureCredential AzureBackupUser

        Gets the backup header information from the SQL Server backup file stored at https://dbatoolsaz.blob.core.windows.net/azbackups/restoretime/restoretime_201705131850.bak on Azure

    #>
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSAvoidUsingPlainTextForPassword", 'AzureCredential', Justification = "For Parameter AzureCredential")]
    [CmdletBinding()]
    param (
        [parameter(Mandatory)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstance]$SqlInstance,
        [PsCredential]$SqlCredential,
        [parameter(Mandatory, ValueFromPipeline)]
        [object[]]$Path,
        [switch]$Simple,
        [switch]$FileList,
        [string]$AzureCredential,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        foreach ($p in $path) {
            if ([System.IO.Path]::GetExtension($p).Length -eq 0) {
                Stop-Function -Message "Path ($p) should be a file, not a folder" -Category InvalidArgument
                return
            }
        }
        Write-Message -Level InternalComment -Message "Starting reading headers"
        try {
            $server = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential
        } catch {
            Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            return
        }
        $getHeaderScript = {
            param (
                $SqlInstance,
                $Path,
                $DeviceType,
                $AzureCredential
            )
            #Copy existing connection to create an independent TSQL session
            $server = New-Object Microsoft.SqlServer.Management.Smo.Server $SqlInstance.ConnectionContext.Copy()
            $restore = New-Object Microsoft.SqlServer.Management.Smo.Restore

            if ($DeviceType -eq 'URL') {
                $restore.CredentialName = $AzureCredential
            }

            $device = New-Object Microsoft.SqlServer.Management.Smo.BackupDeviceItem $Path, $DeviceType
            $restore.Devices.Add($device)
            $dataTable = $restore.ReadBackupHeader($server)
            $null = $dataTable.Columns.Add("FileList", [object])
            $null = $dataTable.Columns.Add("SqlVersion")
            $null = $dataTable.Columns.Add("BackupPath")

            foreach ($row in $dataTable) {
                $row.BackupPath = $Path
                
                $backupsize = $row.BackupSize
                $null = $dataTable.Columns.Remove("BackupSize")
                $null = $dataTable.Columns.Add("BackupSize", [dbasize])
                if ($backupsize -isnot [dbnull]) {
                    $row.BackupSize = [dbasize]$backupsize
                }
                
                $cbackupsize = $row.CompressedBackupSize
                $null = $dataTable.Columns.Remove("CompressedBackupSize")
                $null = $dataTable.Columns.Add("CompressedBackupSize", [dbasize])
                if ($cbackupsize -isnot [dbnull]) {
                    $row.CompressedBackupSize = [dbasize]$cbackupsize
                }
                
                $restore.FileNumber = $row.Position
                <# Select-Object does a quick and dirty conversion from datatable to PS object #>
                $row.FileList = $restore.ReadFileList($server) | Select-Object *
            }
            $dataTable
        }
    }

    process {
        if (Test-FunctionInterrupt) { return }

        #Extract fullnames from the file system objects
        $pathStrings = @()
        foreach ($pathItem in $Path) {
            if ($null -ne $pathItem.FullName) {
                $pathStrings += $pathItem.FullName
            } else {
                $pathStrings += $pathItem
            }
        }
        #Group by filename
        $pathGroup = $pathStrings | Group-Object -NoElement | Select-Object -ExpandProperty Name

        $pathCount = ($pathGroup | Measure-Object).Count
        Write-Message -Level Verbose -Message "$pathCount unique files to scan."
        Write-Message -Level Verbose -Message "Checking accessibility for all the files."

        $testPath = Test-DbaPath -SqlInstance $server -Path $pathGroup

        #Setup initial session state
        $InitialSessionState = [System.Management.Automation.Runspaces.InitialSessionState]::CreateDefault()
        $defaultrunspace = [System.Management.Automation.Runspaces.Runspace]::DefaultRunspace
        #Create Runspace pool, min - 1, max - 10 sessions: there is internal SQL Server queue for the restore operations. 10 threads seem to perform best
        $runspacePool = [runspacefactory]::CreateRunspacePool(1, 10, $InitialSessionState, $Host)
        $runspacePool.Open()

        $threads = @()

        foreach ($file in $pathGroup) {
            if ($file -like 'http*') {
                $deviceType = 'URL'
            } else {
                $deviceType = 'FILE'
            }
            if ($pathCount -eq 1) {
                $fileExists = $testPath
            } else {
                $fileExists = ($testPath | Where-Object FilePath -eq $file).FileExists
            }
            if ($fileExists -or $deviceType -eq 'URL') {
                #Create parameters hashtable
                $argsRunPool = @{
                    SqlInstance     = $server
                    Path            = $file
                    AzureCredential = $AzureCredential
                    DeviceType      = $deviceType
                }
                Write-Message -Level Verbose -Message "Scanning file $file."
                #Create new runspace thread
                $thread = [powershell]::Create()
                $thread.RunspacePool = $runspacePool
                $thread.AddScript($getHeaderScript) | Out-Null
                $thread.AddParameters($argsRunPool) | Out-Null
                #Start the thread
                $handle = $thread.BeginInvoke()
                $threads += [pscustomobject]@{
                    handle      = $handle
                    thread      = $thread
                    file        = $file
                    deviceType  = $deviceType
                    isRetrieved = $false
                    started     = Get-Date
                }
            } else {
                Write-Message -Level Warning -Message "File $file does not exist or access denied. The SQL Server service account may not have access to the source directory."
            }
        }
        #receive runspaces
        while ($threads | Where-Object { $_.isRetrieved -eq $false }) {
            $totalThreads = ($threads | Measure-Object).Count
            $totalRetrievedThreads = ($threads | Where-Object { $_.isRetrieved -eq $true } | Measure-Object).Count
            Write-Progress -Id 1 -Activity Updating -Status 'Progress' -CurrentOperation "Scanning Restore headers: $totalRetrievedThreads/$totalThreads" -PercentComplete ($totalRetrievedThreads / $totalThreads * 100)
            foreach ($thread in ($threads | Where-Object { $_.isRetrieved -eq $false })) {
                if ($thread.Handle.IsCompleted) {
                    $dataTable = $thread.thread.EndInvoke($thread.handle)
                    $thread.isRetrieved = $true
                    #Check if thread had any errors
                    if ($thread.thread.HadErrors) {
                        if ($thread.deviceType -eq 'FILE') {
                            Stop-Function -Message "Problem found with $($thread.file)." -Target $thread.file -ErrorRecord $thread.thread.Streams.Error -Continue
                        } else {
                            Stop-Function -Message "Unable to read $($thread.file), check credential $AzureCredential and network connectivity." -Target $thread.file -ErrorRecord $thread.thread.Streams.Error -Continue
                        }
                    }
                    #Process the result of this thread

                    $dbVersion = $dataTable[0].DatabaseVersion
                    $SqlVersion = (Convert-DbVersionToSqlVersion $dbVersion)
                    foreach ($row in $dataTable) {
                        $row.SqlVersion = $SqlVersion
                        if ($row.BackupName -eq "*** INCOMPLETE ***") {
                            Stop-Function -Message "$($thread.file) appears to be from a new version of SQL Server than $SqlInstance, skipping" -Target $thread.file -Continue
                        }
                    }
                    if ($Simple) {
                        $dataTable | Select-Object DatabaseName, BackupFinishDate, RecoveryModel, BackupSize, CompressedBackupSize, DatabaseCreationDate, UserName, ServerName, SqlVersion, BackupPath
                    } elseif ($FileList) {
                        $dataTable.filelist
                    } else {
                        $dataTable
                    }

                    $thread.thread.Dispose()
                }
            }
            Start-Sleep -Milliseconds 500
        }
        #Close the runspace pool
        $runspacePool.Close()
        [System.Management.Automation.Runspaces.Runspace]::DefaultRunspace = $defaultrunspace
    }
}

tools\dbatools\functions\Read-DbaTraceFile.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Read-DbaTraceFile {
    <#
    .SYNOPSIS
        Reads SQL Server trace files

    .DESCRIPTION
        Using the fn_trace_gettable function, a trace file is read and returned as a PowerShell object

        This function returns the whole of the trace file. The information is presented in the format that the trace subsystem uses.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Path
        Path to the trace file. This path is relative to the SQL Server instance.

    .PARAMETER Database
        Search for results only with specific DatabaseName. Uses IN for comparisons.

    .PARAMETER Login
        Search for results only with specific Logins. Uses IN for comparisons.

    .PARAMETER Spid
        Search for results only with specific Spids. Uses IN for comparisons.

    .PARAMETER EventClass
        Search for results only with specific EventClasses. Uses IN for comparisons.

    .PARAMETER ObjectType
        Search for results only with specific ObjectTypes. Uses IN for comparisons.

    .PARAMETER ErrorId
        Search for results only with specific Errors. Filters 'Error in ($ErrorId)'  Uses IN for comparisons.

    .PARAMETER EventSequence
        Search for results only with specific EventSequences. Uses IN for comparisons.

    .PARAMETER TextData
        Search for results only with specific TextData. Uses LIKE for comparisons.

    .PARAMETER ApplicationName
        Search for results only with specific ApplicationNames. Uses LIKE for comparisons.

    .PARAMETER ObjectName
        Search for results only with specific ObjectNames. Uses LIKE for comparisons.

    .PARAMETER Where
        Custom where clause - use without the word "WHERE". Here are the available columns:

        TextData
        BinaryData
        DatabaseID
        TransactionID
        LineNumber
        NTUserName
        NTDomainName
        HostName
        ClientProcessID
        ApplicationName
        LoginName
        SPID
        Duration
        StartTime
        EndTime
        Reads
        Writes
        CPU
        Permissions
        Severity
        EventSubClass
        ObjectID
        Success
        IndexID
        IntegerData
        ServerName
        EventClass
        ObjectType
        NestLevel
        State
        Error
        Mode
        Handle
        ObjectName
        DatabaseName
        FileName
        OwnerName
        RoleName
        TargetUserName
        DBUserName
        LoginSid
        TargetLoginName
        TargetLoginSid
        ColumnPermissions
        LinkedServerName
        ProviderName
        MethodName
        RowCounts
        RequestID
        XactSequence
        EventSequence
        BigintData1
        BigintData2
        GUID
        IntegerData2
        ObjectID2
        Type
        OwnerID
        ParentName
        IsSystem
        Offset
        SourceDatabaseID
        SqlHandle
        SessionLoginName
        PlanHandle
        GroupID

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Security, Trace
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Read-DbaTraceFile -SqlInstance sql2016 -Database master, tempdb -Path C:\traces\big.trc

        Reads the tracefile C:\traces\big.trc, stored on the sql2016 sql server. Filters only results that have master or tempdb as the DatabaseName.

    .EXAMPLE
        PS C:\> Read-DbaTraceFile -SqlInstance sql2016 -Database master, tempdb -Path C:\traces\big.trc -TextData 'EXEC SP_PROCOPTION'

        Reads the tracefile C:\traces\big.trc, stored on the sql2016 sql server.
        Filters only results that have master or tempdb as the DatabaseName and that have 'EXEC SP_PROCOPTION' somewhere in the text.

    .EXAMPLE
        PS C:\> Read-DbaTraceFile -SqlInstance sql2016 -Path C:\traces\big.trc -Where "LinkedServerName = 'myls' and StartTime > '5/30/2017 4:27:52 PM'"

        Reads the tracefile C:\traces\big.trc, stored on the sql2016 sql server.
        Filters only results where LinkServerName = myls and StartTime is greater than '5/30/2017 4:27:52 PM'.

    .EXAMPLE
        PS C:\> Get-DbaTrace -SqlInstance sql2014 | Read-DbaTraceFile

        Reads every trace file on sql2014

    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipelineByPropertyName)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [parameter(ValueFromPipelineByPropertyName)]
        [PSCredential]$SqlCredential,
        [parameter(ValueFromPipelineByPropertyName)]
        [string[]]$Path,
        [string[]]$Database,
        [string[]]$Login,
        [int[]]$Spid,
        [string[]]$EventClass,
        [string[]]$ObjectType,
        [int[]]$ErrorId,
        [int[]]$EventSequence,
        [string[]]$TextData,
        [string[]]$ApplicationName,
        [string[]]$ObjectName,
        [string]$Where,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        if ($where) {
            $Where = "where $where"
        } elseif ($Database -or $Login -or $Spid -or $ApplicationName -or $EventClass -or $ObjectName -or $ObjectType -or $EventSequence -or $ErrorId) {

            $tempwhere = @()

            if ($Database) {
                $where = $database -join "','"
                $tempwhere += "databasename in ('$where')"
            }

            if ($Login) {
                $where = $Login -join "','"
                $tempwhere += "LoginName in ('$where')"
            }

            if ($Spid) {
                $where = $Spid -join ","
                $tempwhere += "Spid in ($where)"
            }

            if ($EventClass) {
                $where = $EventClass -join ","
                $tempwhere += "EventClass in ($where)"
            }

            if ($ObjectType) {
                $where = $ObjectType -join ","
                $tempwhere += "ObjectType in ($where)"
            }

            if ($ErrorId) {
                $where = $ErrorId -join ","
                $tempwhere += "Error in ($where)"
            }

            if ($EventSequence) {
                $where = $EventSequence -join ","
                $tempwhere += "EventSequence in ($where)"
            }

            if ($TextData) {
                $where = $TextData -join "%','%"
                $tempwhere += "TextData like ('%$where%')"
            }

            if ($ApplicationName) {
                $where = $ApplicationName -join "%','%"
                $tempwhere += "ApplicationName like ('%$where%')"
            }

            if ($ObjectName) {
                $where = $ObjectName -join "%','%"
                $tempwhere += "ObjectName like ('%$where%')"
            }

            $tempwhere = $tempwhere -join " and "
            $Where = "where $tempwhere"
        }
    }
    process {
        foreach ($instance in $sqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
                return
            }

            if (Test-Bound -Parameter Path) {
                $currentpath = $path
            } else {
                $currentpath = $server.ConnectionContext.ExecuteScalar("Select path from sys.traces where is_default = 1")
            }

            foreach ($file in $currentpath) {
                Write-Message -Level Verbose -Message "Parsing $file"

                $exists = Test-DbaPath -SqlInstance $server -Path $file

                if (!$exists) {
                    Write-Message -Level Warning -Message "Path does not exist" -Target $file
                    Continue
                }

                $sql = "select SERVERPROPERTY('MachineName') AS ComputerName,
                ISNULL(SERVERPROPERTY('InstanceName'), 'MSSQLSERVER') AS InstanceName,
                SERVERPROPERTY('ServerName') AS SqlInstance,
                 * FROM [fn_trace_gettable]('$file', DEFAULT) $Where"

                try {
                    $server.Query($sql)
                } catch {
                    Stop-Function -Message "Error returned from SQL Server: $_" -Target $server -InnerErrorRecord $_
                }
            }
        }
    }
}

tools\dbatools\functions\Read-DbaTransactionLog.ps1

function Read-DbaTransactionLog {
    <#
    .SYNOPSIS
        Reads the live Transaction log from specified SQL Server Database

    .DESCRIPTION
        Using the fn_dblog function, the live transaction log is read and returned as a PowerShell object

        This function returns the whole of the log. The information is presented in the format that the logging subsystem uses.

        A soft limit of 0.5GB of log as been implemented. This is based on testing. This limit can be overridden
        at the users request, but please be aware that this may have an impact on your target databases and on the
        system running this function

    .PARAMETER SqlInstance
        The target SQL Server instance or instances

    .PARAMETER SqlCredential
        A credential to use to connect to the SQL Instance rather than using Windows Authentication

    .PARAMETER Database
        Database to read the transaction log of

    .PARAMETER IgnoreLimit
        Switch to indicate that you wish to bypass the recommended limits of the function

    .PARAMETER RowLimit
        Will limit the number of rows returned from the transaction log

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Database, Log, LogFile
        Author: Stuart Moore (@napalmgram), stuart-moore.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> $Log = Read-DbaTransactionLog -SqlInstance sql2016 -Database MyDatabase

        Will read the contents of the transaction log of MyDatabase on SQL Server Instance sql2016 into the local PowerShell object $Log

    .EXAMPLE
        PS C:\> $Log = Read-DbaTransactionLog -SqlInstance sql2016 -Database MyDatabase -IgnoreLimit

        Will read the contents of the transaction log of MyDatabase on SQL Server Instance sql2016 into the local PowerShell object $Log, ignoring the recommendation of not returning more that 0.5GB of log

    #>
    [CmdletBinding(DefaultParameterSetName = "Default")]
    param (
        [parameter(Position = 0, Mandatory)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter]$SqlInstance,
        [PSCredential]$SqlCredential,
        [parameter(Mandatory)]
        [object]$Database,
        [Switch]$IgnoreLimit,
        [int]$RowLimit = 0,
        [Alias('Silent')]
        [switch]$EnableException
    )

    try {
        $server = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential
    } catch {
        Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
        return
    }

    if (-not $server.databases[$Database]) {
        Stop-Function -Message "$Database does not exist"
        return
    }

    if ('Normal' -notin ($server.databases[$Database].Status -split ',')) {
        Stop-Function -Message "$Database is not in a normal State, command will not run."
        return
    }

    if ($RowLimit -gt 0) {
        Write-Message -Message "Limiting results to $RowLimit rows" -Level Verbose
        $RowLimitSql = " TOP $RowLimit "
        $IgnoreLimit = $true
    } else {
        $RowLimitSql = ""
    }


    if ($IgnoreLimit) {
        Write-Message -Level Verbose -Message "Please be aware that ignoring the recommended limits may impact on the performance of the SQL Server database and the calling system"
    } else {
        #Warn if more than 0.5GB of live log. Dodgy conversion as SMO returns the value in an unhelpful format :(
        $SqlSizeCheck = "select
                                sum(FileProperty(sf.name,'spaceused')*8/1024) as 'SizeMb'
                                from sys.sysfiles sf
                                where CONVERT(INT,sf.status & 0x40) / 64=1"
        $TransLogSize = $server.Query($SqlSizeCheck, $Database)
        if ($TransLogSize.SizeMb -ge 500) {
            Stop-Function -Message "$Database has more than 0.5 Gb of live log data, returning this may have an impact on the database and the calling system. If you wish to proceed please rerun with the -IgnoreLimit switch"
            return
        }
    }

    $sql = "select $RowLimitSql * from fn_dblog(NULL,NULL)"
    Write-Message -Level Debug -Message $sql
    Write-Message -Level Verbose -Message "Starting Log retrieval"
    $server.Query($sql, $Database)

}

tools\dbatools\functions\Read-DbaXEFile.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Read-DbaXEFile {
    <#
    .SYNOPSIS
        Read XEvents from a *.xel or *.xem file.

    .DESCRIPTION
        Read XEvents from a *.xel or *.xem file.

    .PARAMETER Path
        The path to the *.xem or *.xem file. This is relative to the computer executing the command. UNC paths are supported.

    .PARAMETER Exact
        If this switch is enabled, only an exact search will be used for the Path. By default, this command will add a wildcard to the Path because Eventing uses the file name as a template and adds characters.

    .PARAMETER Raw
        If this switch is enabled, the Microsoft.SqlServer.XEvent.Linq.PublishedEvent enumeration object will be returned.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: ExtendedEvent, XE, XEvent
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Read-DbaXEFile

    .EXAMPLE
        PS C:\> Read-DbaXEFile -Path C:\temp\deadocks.xel

        Returns events from C:\temp\deadocks.xel.

    .EXAMPLE
        PS C:\> Get-ChildItem C:\temp\xe\*.xel | Read-DbaXEFile

        Returns events from all .xel files in C:\temp\xe.

    .EXAMPLE
        PS C:\> Get-DbaXESession -SqlInstance sql2014 -Session deadlocks | Read-DbaXEFile

        Reads remote XEvents by accessing the file over the admin UNC share.

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias('FullName')]
        [object[]]$Path,
        [switch]$Exact,
        [switch]$Raw,
        [switch][Alias('Silent')]
        $EnableException
    )
    process {
        foreach ($file in $path) {
            # in order to ensure CSV gets all fields, all columns will be
            # collected and output in the first (all all subsequent) object
            $columns = @("name", "timestamp")

            if ($file -is [System.String]) {
                $currentfile = $file
                #Variable marked as unused by PSScriptAnalyzer
                #$manualadd = $true
            } elseif ($file -is [System.IO.FileInfo]) {
                $currentfile = $file.FullName
                #Variable marked as unused by PSScriptAnalyzer
                #$manualadd = $true
            } else {
                if ($file -isnot [Microsoft.SqlServer.Management.XEvent.Session]) {
                    Stop-Function -Message "Unsupported file type."
                    return
                }

                if ($file.TargetFile.Length -eq 0) {
                    Stop-Function -Message "This session does not have an associated Target File."
                    return
                }

                $instance = [dbainstance]$file.ComputerName

                if ($instance.IsLocalHost) {
                    $currentfile = $file.TargetFile
                } else {
                    $currentfile = $file.RemoteTargetFile
                }
            }

            if (-not $Exact) {
                $currentfile = $currentfile.Replace('.xel', '*.xel')
                $currentfile = $currentfile.Replace('.xem', '*.xem')

                if ($currentfile -notmatch "xel" -and $currentfile -notmatch "xem") {
                    $currentfile = "$currentfile*.xel"
                }
            }

            $accessible = Test-Path -Path $currentfile
            $whoami = whoami

            if (-not $accessible) {
                if ($file.Status -eq "Stopped") { continue }
                Stop-Function -Continue -Message "$currentfile cannot be accessed from $($env:COMPUTERNAME). Does $whoami have access?"
            }

            if ($raw) {
                return New-Object Microsoft.SqlServer.XEvent.Linq.QueryableXEventData($currentfile)
            }

            $enum = New-Object Microsoft.SqlServer.XEvent.Linq.QueryableXEventData($currentfile)
            $newcolumns = ($enum.Fields.Name | Select-Object -Unique)

            $actions = ($enum.Actions.Name | Select-Object -Unique)
            foreach ($action in $actions) {
                $newcolumns += ($action -Split '\.')[-1]
            }

            $newcolumns = $newcolumns | Sort-Object
            $columns = ($columns += $newcolumns) | Select-Object -Unique

            # Make it selectable, otherwise it's a weird enumeration
            foreach ($event in $enum) {
                $hash = [ordered]@{ }

                foreach ($column in $columns) {
                    $null = $hash.Add($column, $event.$column)
                }

                foreach ($action in $event.Actions) {
                    $hash[$action.Name] = $action.Value
                }

                foreach ($field in $event.Fields) {
                    $hash[$field.Name] = $field.Value
                }

                [pscustomobject]$hash
            }
            $enum.Dispose()
        }
    }
}

tools\dbatools\functions\Remove-DbaAgDatabase.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Remove-DbaAgDatabase {
    <#
    .SYNOPSIS
        Removes a database from an availability group on a SQL Server instance.

    .DESCRIPTION
        Removes a database from an availability group on a SQL Server instance.

   .PARAMETER SqlInstance
        The target SQL Server instance or instances. Server version must be SQL Server version 2012 or higher.

    .PARAMETER SqlCredential
        Login to the SqlInstance instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The database or databases to remove.

    .PARAMETER AvailabilityGroup
        Only remove databases from specific availability groups.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER InputObject
        Enables piping from Get-DbaDatabase

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: AvailabilityGroup, HA, AG
        Author: Chrissy LeMaire (@cl), netnerds.net
        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Remove-DbaAgDatabase

    .EXAMPLE
        PS C:\> Remove-DbaAgDatabase -SqlInstance sqlserver2012 -AvailabilityGroup ag1, ag2 -Confirm:$false

        Removes the ag1 and ag2 availability groups on sqlserver2012.  Does not prompt for confirmation.

    .EXAMPLE
        PS C:\> Get-DbaAvailabilityGroup -SqlInstance sqlserver2012 -AvailabilityGroup availabilitygroup1 | Remove-DbaAgDatabase

        Removes the availability groups returned from the Get-DbaAvailabilityGroup function. Prompts for confirmation.
    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'High')]
    param (
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$Database,
        [string[]]$AvailabilityGroup,
        # needs to accept db or agdb so generic object

        [parameter(ValueFromPipeline)]
        [object[]]$InputObject,
        [switch]$EnableException
    )
    process {
        if ((Test-Bound -ParameterName SqlInstance)) {
            if ((Test-Bound -Not -ParameterName Database)) {
                Stop-Function -Message "You must specify one or more databases and one or more Availability Groups when using the SqlInstance parameter."
                return
            }
        }

        if ($InputObject) {
            if ($InputObject[0].GetType().Name -eq 'Database') {
                $Database += $InputObject.Name
            }
        }

        if ($SqlInstance) {
            $InputObject += Get-DbaAgDatabase -SqlInstance $SqlInstance -SqlCredential $SqlCredential -Database $Database
        }

        foreach ($db in $InputObject) {
            if ($Pscmdlet.ShouldProcess($db.Parent.Parent.Name, "Removing availability group database $db")) {
                try {
                    $ag = $db.Parent.Name
                    $db.Parent.AvailabilityDatabases[$db.Name].Drop()
                    [pscustomobject]@{
                        ComputerName      = $db.ComputerName
                        InstanceName      = $db.InstanceName
                        SqlInstance       = $db.SqlInstance
                        AvailabilityGroup = $ag
                        Database          = $db.Name
                        Status            = "Removed"
                    }
                } catch {
                    Stop-Function -Message "Failure" -ErrorRecord $_ -Continue
                }
            }
        }
    }
}

tools\dbatools\functions\Remove-DbaAgentJob.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Remove-DbaAgentJob {
    <#
    .SYNOPSIS
        Remove-DbaAgentJob removes a job.

    .DESCRIPTION
        Remove-DbaAgentJob removes a job in the SQL Server Agent.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Job
        The name of the job. Can be null if the the job id is being used.

    .PARAMETER KeepHistory
        Specifies to keep the history for the job. By default history is deleted.

    .PARAMETER KeepUnusedSchedule
        Specifies to keep the schedules attached to this job if they are not attached to any other job.
        By default the unused schedule is deleted.

    .PARAMETER Mode
        Default: Strict
        How strict does the command take lesser issues?
        Strict: Interrupt if the job specified doesn't exist.
        Lazy:   Silently skip over jobs that don't exist.

    .PARAMETER InputObject
        Accepts piped input from Get-DbaAgentJob

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Agent, Job
        Author: Sander Stad (@sqlstad, sqlstad.nl)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Remove-DbaAgentJob

    .EXAMPLE
        PS C:\> Remove-DbaAgentJob -SqlInstance sql1 -Job Job1

        Removes the job from the instance with the name Job1

    .EXAMPLE
        PS C:\> GetDbaAgentJob -SqlInstance sql1 -Job Job1 | Remove-DbaAgentJob -KeepHistory

        Removes teh job but keeps the history

    .EXAMPLE
        PS C:\> Remove-DbaAgentJob -SqlInstance sql1 -Job Job1 -KeepUnusedSchedule

        Removes the job but keeps the unused schedules

    .EXAMPLE
        PS C:\> Remove-DbaAgentJob -SqlInstance sql1, sql2, sql3 -Job Job1

        Removes the job from multiple servers

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "Low")]
    param (
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [object[]]$Job,
        [switch]$KeepHistory,
        [switch]$KeepUnusedSchedule,
        [DbaMode]$Mode = (Get-DbatoolsConfigValue -FullName 'message.mode.default' -Fallback "Strict"),
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Agent.Job[]]$InputObject,
        [Alias('Silent')]
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            foreach ($j in $Job) {
                if ($Server.JobServer.Jobs.Name -notcontains $j) {
                    switch ($Mode) {
                        'Lazy' {
                            Write-Message -Level Verbose -Message "Job $j doesn't exists on $instance." -Target $instance
                        }
                        'Strict' {
                            Stop-Function -Message "Job $j doesn't exist on $instance." -Continue -ContinueLabel main -Target $instance -Category InvalidData
                        }
                    }
                }
                $InputObject += ($Server.JobServer.Jobs | Where-Object Name -eq $j)
            }
        }
        foreach ($currentJob in $InputObject) {
            $j = $currentJob.Name
            $server = $currentJob.Parent.Parent

            if ($PSCmdlet.ShouldProcess($instance, "Removing the job $j from $server")) {
                try {
                    $dropHistory = $dropSchedule = 1

                    if (Test-Bound -ParameterName KeepHistory) {
                        Write-Message -Level SomewhatVerbose -Message "Job history will be kept"
                        $dropHistory = 0
                    }
                    if (Test-Bound -ParameterName KeepUnusedSchedule) {
                        Write-Message -Level SomewhatVerbose -Message "Unused job schedules will be kept"
                        $dropSchedule = 0
                    }
                    Write-Message -Level SomewhatVerbose -Message "Removing job"
                    $dropJobQuery = ("EXEC dbo.sp_delete_job @job_name = '{0}', @delete_history = {1}, @delete_unused_schedule = {2}" -f $currentJob.Name.Replace("'", "''"), $dropHistory, $dropSchedule)
                    $server.Databases['msdb'].ExecuteNonQuery($dropJobQuery)
                    [pscustomobject]@{
                        ComputerName = $server.ComputerName
                        InstanceName = $server.ServiceName
                        SqlInstance  = $server.DomainInstanceName
                        Name         = $currentJob.Name
                        Status       = 'Dropped'
                    }
                } catch {
                    Write-Message -Level Verbose -Message "Could not drop job $job on $server"

                    [pscustomobject]@{
                        ComputerName = $server.ComputerName
                        InstanceName = $server.ServiceName
                        SqlInstance  = $server.DomainInstanceName
                        Name         = $currentJob.Name
                        Status       = "Failed. $(Get-ErrorMessage -Record $_)"
                    }
                }
            }
        }
    }
}

tools\dbatools\functions\Remove-DbaAgentJobCategory.ps1

function Remove-DbaAgentJobCategory {
    <#
    .SYNOPSIS
        Remove-DbaAgentJobCategory removes a job category.

    .DESCRIPTION
        Remove-DbaAgentJobCategory makes it possible to remove a job category.
        Be assured that the category you want to remove is not used with other jobs. If another job uses this category it will be get the category [Uncategorized (Local)].

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2000 or greater.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Category
        The name of the category

    .PARAMETER Force
        The force parameter will ignore some errors in the parameters and assume defaults.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Agent, Job, JobCategory
        Author: Sander Stad (@sqlstad, sqlstad.nl)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Remove-DbaAgentJobCategory

    .EXAMPLE
        PS C:\> Remove-DbaAgentJobCategory -SqlInstance sql1 -Category 'Category 1'

        Remove the job category Category 1 from the instance.

    .EXAMPLE
        PS C:\> Remove-DbaAgentJobCategory -SqlInstance sql1 -Category Category1, Category2, Category3

        Remove multiple job categories from the instance.

    .EXAMPLE
        PS C:\> Remove-DbaAgentJobCategory -SqlInstance sql1, sql2, sql3 -Category Category1, Category2, Category3

        Remove multiple job categories from the multiple instances.

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "Low")]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [ValidateNotNullOrEmpty()]
        [string[]]$Category,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {

        foreach ($instance in $sqlinstance) {
            # Try connecting to the instance
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            # Loop through each of the categories
            foreach ($cat in $Category) {

                # Check if the job category exists
                if ($cat -notin $server.JobServer.JobCategories.Name) {
                    Stop-Function -Message "Job category $cat doesn't exist on $instance" -Target $instance -Continue
                }

                # Remove the category
                if ($PSCmdlet.ShouldProcess($instance, "Changing the job category $Category")) {
                    try {
                        # Get the category
                        $currentCategory = $server.JobServer.JobCategories[$cat]

                        Write-Message -Message "Removing job category $cat" -Level Verbose

                        $currentCategory.Drop()
                    } catch {
                        Stop-Function -Message "Something went wrong removing the job category $cat on $instance" -Target $cat -Continue -ErrorRecord $_
                    }

                } #if should process

            } # for each category

        } # for each instance

    } # end process

    end {
        if (Test-FunctionInterrupt) { return }
        Write-Message -Message "Finished removing job category." -Level Verbose
    }

}

tools\dbatools\functions\Remove-DbaAgentJobStep.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Remove-DbaAgentJobStep {
    <#
    .SYNOPSIS
        Removes a step from the specified SQL Agent job.

    .DESCRIPTION
        Removes a job step from a SQL Server Agent job.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Job
        The name of the job.

    .PARAMETER StepName
        The name of the job step.

    .PARAMETER Mode
        Default: Strict
        How strict does the command take lesser issues?
        Strict: Interrupt if the configuration already has the same value as the one specified.
        Lazy:   Silently skip over instances that already have this configuration at the specified value.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Agent, Job, JobStep
        Author: Sander Stad (@sqlstad), sqlstad.nl

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Remove-DbaAgentJobStep

    .EXAMPLE
        PS C:\> Remove-DbaAgentJobStep -SqlInstance sql1 -Job Job1 -StepName Step1

        Remove 'Step1' from job 'Job1' on sql1.

    .EXAMPLE
        PS C:\> Remove-DbaAgentJobStep -SqlInstance sql1 -Job Job1, Job2, Job3 -StepName Step1

        Remove the job step from multiple jobs.

    .EXAMPLE
        PS C:\> Remove-DbaAgentJobStep -SqlInstance sql1, sql2, sql3 -Job Job1 -StepName Step1

        Remove the job step from the job on multiple servers.

    .EXAMPLE
        PS C:\> sql1, sql2, sql3 | Remove-DbaAgentJobStep -Job Job1 -StepName Step1

        Remove the job step from the job on multiple servers using pipeline.

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "Low")]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [object[]]$Job,
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [string]$StepName,
        [DbaMode]$Mode = (Get-DbatoolsConfigValue -Name 'message.mode.default' -Fallback "Strict"),
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            foreach ($j in $Job) {
                Write-Message -Level Verbose -Message "Processing job $j"
                # Check if the job exists
                if ($Server.JobServer.Jobs.Name -notcontains $j) {
                    switch ($Mode) {
                        'Lazy' {
                            Write-Message -Level Verbose -Message "Job $j doesn't exists on $instance." -Target $instance
                        }
                        'Strict' {
                            Stop-Function -Message "Job $j doesnn't exist on $instance." -Continue -ContinueLabel main -Target $instance -Category InvalidData
                        }
                    }
                } else {
                    # Check if the job step exists
                    if ($Server.JobServer.Jobs[$j].JobSteps.Name -notcontains $StepName) {
                        switch ($Mode) {
                            'Lazy' {
                                Write-Message -Level Verbose -Message "Step $StepName doesn't exist for $job on $instance." -Target $instance
                            }
                            'Strict' {
                                Stop-Function -Message "Step $StepName doesn't exist for $job on $instance." -Continue -ContinueLabel main -Target $instance -Category InvalidData
                            }
                        }
                    } else {
                        # Execute
                        if ($PSCmdlet.ShouldProcess($instance, "Removing the job step $StepName for job $j")) {
                            try {
                                $JobStep = $Server.JobServer.Jobs[$j].JobSteps[$StepName]
                                Write-Message -Level SomewhatVerbose -Message "Removing the job step $StepName for job $j."
                                $JobStep.Drop()
                            } catch {
                                Stop-Function -Message "Something went wrong removing the job step" -Target $JobStep -Continue -ErrorRecord $_
                                Write-Message -Level Verbose -Message "Could not remove the job step $StepName from $j"
                            }
                        }
                    }
                }
            }
        }
    }
    end {
        Write-Message -Message "Finished removing the jobs step(s)" -Level Verbose
    }
}

tools\dbatools\functions\Remove-DbaAgentSchedule.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Remove-DbaAgentSchedule {
    <#
    .SYNOPSIS
        Remove-DbaAgentJobSchedule removes a job schedule.

    .DESCRIPTION
        Remove-DbaAgentJobSchedule removes a job in the SQL Server Agent.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2000 or greater.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Schedule
        The name of the job schedule.

    .PARAMETER InputObject
        A collection of schedule (such as returned by Get-DbaAgentSchedule), to be removed.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER Force
        The force parameter will ignore some errors in the parameters and assume defaults.
        It will also remove the any present schedules with the same name for the specific job.

    .NOTES
        Tags: Agent, Job, Schedule
        Author: Sander Stad (@sqlstad), sqlstad.nl

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Remove-DbaAgentJobSchedule

    .EXAMPLE
        PS C:\> Remove-DbaAgentSchedule -SqlInstance sql1 -Schedule weekly

        Remove the schedule weekly

    .EXAMPLE
        PS C:\> Remove-DbaAgentSchedule -SqlInstance sql1 -Schedule weekly -Force

        Remove the schedule weekly from the job even if the schedule is being used by another job.

    .EXAMPLE
        PS C:\> Remove-DbaAgentSchedule -SqlInstance sql1 -Schedule daily, weekly

        Remove multiple schedule

    .EXAMPLE
        PS C:\> Remove-DbaAgentSchedule -SqlInstance sql1, sql2, sql3 -Schedule daily, weekly
        Remove the schedule on multiple servers for multiple schedules

    .EXAMPLE
        sql1, sql2, sql3 | Remove-DbaAgentSchedule -Schedule daily, weekly
        Remove the schedule on multiple servers using pipe line

    .EXAMPLE
        Get-DbaAgentSchedule -SqlInstance sql1 -Schedule sched1, sched2, sched3 | Remove-DbaAgentSchedule

        Remove the schedules using a pipeline

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "Low")]
    param (
        [parameter(Mandatory, ValueFromPipeline, ParameterSetName = "instance")]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [System.Management.Automation.PSCredential]$SqlCredential,
        [Parameter(Mandatory, ParameterSetName = "instance")]
        [ValidateNotNullOrEmpty()]
        [Alias("Schedules")]
        [object[]]$Schedule,
        [Parameter(ValueFromPipeline, Mandatory, ParameterSetName = "schedules")]
        [Microsoft.SqlServer.Management.Smo.Agent.ScheduleBase[]]$InputObject,
        [Alias('Silent')]
        [switch]$EnableException,
        [switch]$Force
    )

    process {

        foreach ($instance in $sqlinstance) {
            # Try connecting to the instance
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $InputObject += $server.JobServer.SharedSchedules

            if ($Schedule) {
                $InputObject = $InputObject | Where-Object Name -in $Schedule
            }

        } # foreach object instance

        foreach ($currentschedule in $InputObject) {
            $server = $currentschedule.Parent.Parent

            if (-not $server) {
                $server = $currentschedule.Parent
            }

            $server.JobServer.SharedSchedules.Refresh()
            $schedulename = $currentschedule.Name
            $jobCount = $server.JobServer.SharedSchedules[$currentschedule].JobCount

            # Check if the schedule is shared among other jobs
            if ($jobCount -ge 1 -and -not $Force) {
                Stop-Function -Message "The schedule $schedulename is shared connected to one or more jobs. If removal is neccesary use -Force." -Target $instance -Continue
            }

            # Remove the job schedule
            if ($PSCmdlet.ShouldProcess($instance, "Removing schedule $currentschedule on $instance")) {
                # Loop through each of the schedules and drop them
                Write-Message -Message "Removing schedule $schedulename on $instance" -Level Verbose

                #Check if jobs use the schedule
                if ($jobCount -ge 1) {
                    # Get the job object
                    $smoSchedules = $server.JobServer.SharedSchedules | Where-Object { ($_.Name -eq $currentschedule.Name) }

                    Write-Message -Message "Schedule $schedulename is used in one or more jobs. Removing it for each job." -Level Verbose

                    # Loop through each if the schedules
                    foreach ($smoSchedule in ($smoSchedules)) {

                        # Get the job ids
                        $jobGuids = $Server.JobServer.SharedSchedules[$smoSchedule].EnumJobReferences()

                        if (($jobCount -gt 1 -and $Force) -or $jobCount -eq 1) {

                            # Loop though each of the jobs
                            foreach ($guid in $jobGuids) {
                                # Get the job object
                                $smoJob = $Server.JobServer.GetJobByID($guid)

                                # Get the job schedule
                                $jobSchedules = $Server.JobServer.Jobs[$smoJob].JobSchedules | Where-Object { $_.Name -eq $smoSchedule }

                                foreach ($jobSchedule in ($jobSchedules)) {
                                    try {
                                        Write-Message -Message "Removing the schedule $jobSchedule for job $smoJob" -Level Verbose

                                        $jobSchedule.Drop()
                                    } catch {
                                        Stop-Function -Message "Failure" -Target $instance -ErrorRecord $_ -Continue
                                    }
                                }
                            }
                        }
                    }
                }

                Write-Message -Message "Removing schedules that are not being used by other jobs." -Level Verbose
                $server.JobServer.SharedSchedules.Refresh()
                # Get the schedules
                $smoSchedules = $server.JobServer.SharedSchedules | Where-Object { ($_.Name -eq $currentschedule.Name) -and ($_.JobCount -eq 0) }

                # Remove the schedules that have no jobs
                foreach ($smoSchedule in $smoSchedules) {
                    try {
                        $smoSchedule.Drop()
                    } catch {
                        Stop-Function -Message "Something went wrong removing the schedule" -Target $instance -ErrorRecord $_ -Continue
                    }
                }
            }
        }
    }
    end {
        Write-Message -Message "Finished removing jobs schedule(s)." -Level Verbose
    }
}

tools\dbatools\functions\Remove-DbaAgListener.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Remove-DbaAgListener {
    <#
    .SYNOPSIS
        Removes a listener from an availability group on a SQL Server instance.

    .DESCRIPTION
        Removes a listener from an availability group on a SQL Server instance.

   .PARAMETER SqlInstance
        The target SQL Server instance or instances. Server version must be SQL Server version 2012 or higher.

    .PARAMETER SqlCredential
        Login to the SqlInstance instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Listener
        The listener or listeners to remove.

    .PARAMETER AvailabilityGroup
        Only remove listeners from specific availability groups.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER InputObject
        Enables piping from Get-DbaListener

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: AvailabilityGroup, HA, AG
        Author: Chrissy LeMaire (@cl), netnerds.net
        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Remove-DbaAgListener

    .EXAMPLE
        PS C:\> Remove-DbaAgListener -SqlInstance sqlserver2012 -AvailabilityGroup ag1, ag2 -Confirm:$false

        Removes the ag1 and ag2 availability groups on sqlserver2012. Does not prompt for confirmation.

    .EXAMPLE
        PS C:\> Get-DbaAvailabilityGroup -SqlInstance sqlserver2012 -AvailabilityGroup availabilitygroup1 | Remove-DbaAgListener

        Removes the listeners returned from the Get-DbaAvailabilityGroup function. Prompts for confirmation.
    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'High')]
    param (
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$Listener,
        [string[]]$AvailabilityGroup,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.AvailabilityGroupListener[]]$InputObject,
        [switch]$EnableException
    )
    process {
        if ((Test-Bound -ParameterName SqlInstance)) {
            if ((Test-Bound -Not -ParameterName Listener)) {
                Stop-Function -Message "You must specify one or more listeners and one or more Availability Groups when using the SqlInstance parameter."
                return
            }
        }

        if ($SqlInstance) {
            $InputObject += Get-DbaAgListener -SqlInstance $SqlInstance -SqlCredential $SqlCredential -Listener $Listener
        }

        foreach ($aglistener in $InputObject) {
            if ($Pscmdlet.ShouldProcess($aglistener.Parent.Parent.Name, "Removing availability group listener $aglistener")) {
                try {
                    $ag = $aglistener.Parent.Name
                    $aglistener.Parent.AvailabilityGroupListeners[$aglistener.Name].Drop()
                    [pscustomobject]@{
                        ComputerName      = $aglistener.ComputerName
                        InstanceName      = $aglistener.InstanceName
                        SqlInstance       = $aglistener.SqlInstance
                        AvailabilityGroup = $ag
                        Listener          = $aglistener.Name
                        Status            = "Removed"
                    }
                } catch {
                    Stop-Function -Message "Failure" -ErrorRecord $_ -Continue
                }
            }
        }
    }
}

tools\dbatools\functions\Remove-DbaAgReplica.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Remove-DbaAgReplica {
    <#
    .SYNOPSIS
        Removes availability group replicas from availability groups.

    .DESCRIPTION
        Removes availability group replicas from availability groups.

   .PARAMETER SqlInstance
        The target SQL Server instance or instances. Server version must be SQL Server version 2012 or higher.

    .PARAMETER SqlCredential
        Login to the SqlInstance instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER AvailabilityGroup
        The specific availability group to query.

    .PARAMETER Replica
        The replica to remove.

    .PARAMETER InputObject
        Enables piped input from Get-DbaAgReplica.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: AG, HA, AvailabilityGroup, Replica
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Remove-DbaAgReplica

    .EXAMPLE
        PS C:\> Remove-DbaAgReplica -SqlInstance sql2017a -AvailabilityGroup SharePoint -Replica sp1

       Removes the sp1 replica from the SharePoint ag on sql2017a. Prompts for confirmation.

    .EXAMPLE
        PS C:\> Remove-DbaAgReplica -SqlInstance sql2017a | Select-Object *

        Returns full object properties on all availability group replicas found on sql2017a

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'High')]
    param (
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$AvailabilityGroup,
        [string[]]$Replica,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.AvailabilityReplica[]]$InputObject,
        [switch]$EnableException
    )
    process {
        if ($SqlInstance -and -not $Replica) {
            Stop-Function -Message "You must specify a replica when using the SqlInstance parameter."
            return
        }

        if ($SqlInstance) {
            $InputObject += Get-DbaAgReplica -SqlInstance $SqlInstance -SqlCredential $SqlCredential -Replica $Replica -AvailabilityGroup $AvailabilityGroup
        }

        foreach ($agreplica in $InputObject) {
            if ($Pscmdlet.ShouldProcess($agreplica.Parent.Parent.Name, "Removing availability group replica $agreplica")) {
                try {
                    $agreplica.Parent.AvailabilityGroupReplicas[$agreplica.Name].Drop()
                    [pscustomobject]@{
                        ComputerName      = $agreplica.ComputerName
                        InstanceName      = $agreplica.InstanceName
                        SqlInstance       = $agreplica.SqlInstance
                        AvailabilityGroup = $agreplica.Parent.Name
                        Replica           = $agreplica.Name
                        Status            = "Removed"
                    }
                } catch {
                    Stop-Function -Message "Failure" -ErrorRecord $_ -Continue
                }
            }
        }
    }
}

tools\dbatools\functions\Remove-DbaAvailabilityGroup.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Remove-DbaAvailabilityGroup {
    <#
    .SYNOPSIS
        Removes availability groups on a SQL Server instance.

    .DESCRIPTION
        Removes availability groups on a SQL Server instance.

        If possible, remove the availability group only while connected to the server instance that hosts the primary replica.
        When the availability group is dropped from the primary replica, changes are allowed in the former primary databases (without high availability protection).
        Deleting an availability group from a secondary replica leaves the primary replica in the RESTORING state, and changes are not allowed on the databases.

        Avoid dropping an availability group when the Windows Server Failover Clustering (WSFC) cluster has no quorum.
        If you must drop an availability group while the cluster lacks quorum, the metadata availability group that is stored in the cluster is not removed.
        After the cluster regains quorum, you will need to drop the availability group again to remove it from the WSFC cluster.

        For more information: https://docs.microsoft.com/en-us/sql/t-sql/statements/drop-availability-group-transact-sql

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. Server version must be SQL Server version 2012 or higher.

    .PARAMETER SqlCredential
        Login to the SqlInstance instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER AvailabilityGroup
        Only remove specific availability groups.

    .PARAMETER AllAvailabilityGroups
        Remove all availability groups on an instance.

    .PARAMETER InputObject
        Enables piping from Get-DbaAvailabilityGroup.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: AvailabilityGroup, HA, AG
        Author: Chrissy LeMaire (@cl), netnerds.net
        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Remove-DbaAvailabilityGroup

    .EXAMPLE
        PS C:\> Remove-DbaAvailabilityGroup -SqlInstance sqlserver2012 -AllAvailabilityGroups

        Removes all availability groups on the sqlserver2014 instance. Prompts for confirmation.

    .EXAMPLE
        PS C:\> Remove-DbaAvailabilityGroup -SqlInstance sqlserver2012 -AvailabilityGroup ag1, ag2 -Confirm:$false

        Removes the ag1 and ag2 availability groups on sqlserver2012.  Does not prompt for confirmation.

    .EXAMPLE
        PS C:\> Get-DbaAvailabilityGroup -SqlInstance sqlserver2012 -AvailabilityGroup availabilitygroup1 | Remove-DbaAvailabilityGroup

        Removes the availability groups returned from the Get-DbaAvailabilityGroup function. Prompts for confirmation.
    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'High')]
    param (
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$AvailabilityGroup,
        [switch]$AllAvailabilityGroups,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.AvailabilityGroup[]]$InputObject,
        [switch]$EnableException
    )
    process {
        if ((Test-Bound -ParameterName SqlInstance) -and (Test-Bound -Not -ParameterName AvailabilityGroup, AllAvailabilityGroups)) {
            Stop-Function -Message "You must specify AllAvailabilityGroups groups or AvailabilityGroups when using the SqlInstance parameter."
            return
        }
        if ($SqlInstance) {
            $InputObject += Get-DbaAvailabilityGroup -SqlInstance $SqlInstance -SqlCredential $SqlCredential -AvailabilityGroup $AvailabilityGroup
        }
        foreach ($ag in $InputObject) {
            if ($Pscmdlet.ShouldProcess($ag.Parent.Name, "Removing availability group $ag")) {
                # avoid enumeration issues
                try {
                    $ag.Parent.Query("DROP AVAILABILITY GROUP $ag")
                    [pscustomobject]@{
                        ComputerName      = $ag.ComputerName
                        InstanceName      = $ag.InstanceName
                        SqlInstance       = $ag.SqlInstance
                        AvailabilityGroup = $ag.Name
                        Status            = "Removed"
                    }
                } catch {
                    Stop-Function -Message "Failure" -ErrorRecord $_ -Continue
                }
            }
        }
    }
}

tools\dbatools\functions\Remove-DbaBackup.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Remove-DbaBackup {
    <#
    .SYNOPSIS
        Removes SQL Server backups from disk.

    .DESCRIPTION
        Removes SQL Server backups from disk.

        Provides all of the same functionality for removing SQL backups from disk as a standard maintenance plan would.

        As an addition you have the ability to check the Archive bit on files before deletion. This will allow you to ensure backups have been archived to your archive location before removal.

        Also included is the ability to remove empty folders as part of this cleanup activity.

    .PARAMETER Path
        Specifies the name of the base level folder to search for backup files. Deletion of backup files will be recursive from this location.

    .PARAMETER BackupFileExtension
        Specifies the filename extension of the backup files you wish to remove (typically 'bak', 'trn' or 'log'). Do not include the period.

    .PARAMETER RetentionPeriod
        Specifies the retention period for backup files. Correct format is ##U.

        ## is the retention value and must be an integer value
        U signifies the units where the valid units are:
        h = hours
        d = days
        w = weeks
        m = months

        Formatting Examples:
        '48h' = 48 hours
        '7d' = 7 days
        '4w' = 4 weeks
        '1m' = 1 month

    .PARAMETER CheckArchiveBit
        If this switch is enabled, the filesystem Archive bit is checked before deletion. If this bit is set (which translates to "it has not been backed up to another location yet", the file won't be deleted.

    .PARAMETER RemoveEmptyBackupFolder
        If this switch is enabled, empty folders will be removed after the cleanup process is complete.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.i

    .NOTES
        Tags: Storage, DisasterRecovery, Backup
        Author: Chris Sommer (@cjsommer), www.cjsommer.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Remove-DbaBackup

    .EXAMPLE
        PS C:\> Remove-DbaBackup -Path 'C:\MSSQL\SQL Backup\' -BackupFileExtension trn -RetentionPeriod 48h

        '*.trn' files in 'C:\MSSQL\SQL Backup\' and all subdirectories that are more than 48 hours old will be removed.

    .EXAMPLE
        PS C:\> Remove-DbaBackup -Path 'C:\MSSQL\SQL Backup\' -BackupFileExtension trn -RetentionPeriod 48h -WhatIf

        Same as example #1, but doesn't actually remove any files. The function will instead show you what would be done.
        This is useful when first experimenting with using the function.

    .EXAMPLE
        PS C:\> Remove-DbaBackup -Path 'C:\MSSQL\Backup\' -BackupFileExtension bak -RetentionPeriod 7d -CheckArchiveBit

        '*.bak' files in 'C:\MSSQL\Backup\' and all subdirectories that are more than 7 days old will be removed, but only if the files have been backed up to another location as verified by checking the Archive bit.

    .EXAMPLE
        PS C:\> Remove-DbaBackup -Path 'C:\MSSQL\Backup\' -BackupFileExtension bak -RetentionPeriod 1w -RemoveEmptyBackupFolder

        '*.bak' files in 'C:\MSSQL\Backup\' and all subdirectories that are more than 1 week old will be removed. Any folders left empty will be removed as well.

#>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [parameter(Mandatory, HelpMessage = "Full path to the root level backup folder (ex. 'C:\SQL\Backups'")]
        [Alias("BackupFolder")]
        [string]$Path,
        [parameter(Mandatory, HelpMessage = "Backup File extension to remove (ex. bak, trn, dif)")]
        [string]$BackupFileExtension ,
        [parameter(Mandatory, HelpMessage = "Backup retention period. (ex. 24h, 7d, 4w, 6m)")]
        [string]$RetentionPeriod ,
        [switch]$CheckArchiveBit = $false ,
        [switch]$RemoveEmptyBackupFolder = $false,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {
        # Ensure BackupFileExtension does not begin with a .
        if ($BackupFileExtension -match "^[.]") {
            Write-Message -Level Warning -Message "Parameter -BackupFileExtension begins with a period '$BackupFileExtension'. A period is automatically prepended to -BackupFileExtension and need not be passed in."
        }
    }
    process {
        # Process stuff
        Write-Message -Message "Removing backups from $Path" -Level Verbose
        Find-DbaBackup -Path $Path -BackupFileExtension $BackupFileExtension -RetentionPeriod $RetentionPeriod -CheckArchiveBit:$CheckArchiveBit -EnableException |
            Foreach-Object {
            $file = $_
            if ($PSCmdlet.ShouldProcess($file.Directory.FullName, "Removing backup file $($file.Name)")) {
                try {
                    $file | Remove-Item -Force -EA Stop
                } catch {
                    Write-Message -Message "Failed to remove $file." -Level Warning -ErrorRecord $_
                }
            }
        }
        Write-Message -Message "File Cleaning ended." -Level Verbose
        # Cleanup empty backup folders.
        if ($RemoveEmptyBackupFolder) {
            Write-Message -Message "Removing empty folders." -Level Verbose
            (Get-ChildItem -Directory -Path $Path -Recurse -ErrorAction SilentlyContinue -ErrorVariable EnumErrors).FullName |
                Sort-Object -Descending |
                Foreach-Object {
                $OrigPath = $_
                try {
                    $Contents = @(Get-ChildItem -Force $OrigPath -ErrorAction Stop)
                } catch {
                    Write-Message -Message "Can't enumerate $OrigPath." -Level Warning -ErrorRecord $_
                }
                if ($Contents.Count -eq 0) {
                    return $_
                }
            } |
                Foreach-Object {
                $FolderPath = $_
                if ($PSCmdlet.ShouldProcess($Path, "Removing empty folder .$($FolderPath.Replace($Path, ''))")) {
                    try {
                        $FolderPath | Remove-Item -ErrorAction Stop
                    } catch {
                        Write-Message -Message "Failed to remove $FolderPath." -Level Warning -ErrorRecord $_
                    }
                }
            }
            if ($EnumErrors) {
                Write-Message "Errors encountered enumerating folders." -Level Warning -ErrorRecord $EnumErrors
            }
            Write-Message -Message "Removed empty folders." -Level Verbose
        }
    }
}

tools\dbatools\functions\Remove-DbaClientAlias.ps1

function Remove-DbaClientAlias {
    <#
    .SYNOPSIS
        Removes a sql alias for the specified server - mimics cliconfg.exe

    .DESCRIPTION
        Removes a sql alias for the specified server by altering HKLM:\SOFTWARE\Microsoft\MSSQLServer\Client - mimics cliconfg.exe.

    .PARAMETER ComputerName
        The target computer where the alias will be created.

    .PARAMETER Credential
        Allows you to login to remote computers using alternative credentials

    .PARAMETER Alias
        The alias or array of aliases to be deleted

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Alias
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Remove-DbaClientAlias

    .EXAMPLE
        PS C:\> Remove-DbaClientAlias -ComputerName workstationx -Alias sqlps

        Removes the sqlps SQL client alias on workstationx

    .EXAMPLE
        PS C:\> Get-DbaClientAlias | Remove-DbaClientAlias

        Removes all SQL Server client aliases on the local computer

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [parameter(ValueFromPipelineByPropertyName = $true)]
        [DbaInstanceParameter[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [parameter(Mandatory, ValueFromPipelineByPropertyName = $true)]
        [Alias('AliasName')]
        [string[]]$Alias,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        $scriptblock = {
            $Alias = $args

            $basekeys = "HKLM:\SOFTWARE\WOW6432Node\Microsoft\MSSQLServer", "HKLM:\SOFTWARE\Microsoft\MSSQLServer"

            foreach ($basekey in $basekeys) {
                $fullKey = "$basekey\Client\ConnectTo"
                if ((Test-Path $fullKey) -eq $false) {
                    <# DO NOT use Write-Message as this is inside of a script block #>
                    Write-Warning "Registry key ($fullKey) does not exist. Quitting."
                    continue
                }

                if ($basekey -like "*WOW64*") {
                    $architecture = "32-bit"
                } else {
                    $architecture = "64-bit"
                }

                $all = Get-Item -Path $fullKey
                foreach ($entry in $all) {
                    $e = $entry.ToString().Replace('HKEY_LOCAL_MACHINE', 'HKLM:\')
                    foreach ($a in $Alias) {
                        if ($entry.Property -contains $a) {
                            Remove-ItemProperty -Path $e -Name $a

                            [PSCustomObject]@{
                                ComputerName = $computer
                                Architecture = $architecture
                                Alias        = $a
                                Status       = "Removed"
                            }
                        }
                    }
                }
            }
        }
    }

    process {
        foreach ($computer in $ComputerName) {
            $null = Test-ElevationRequirement -ComputerName $computer -Continue

            if ($PSCmdlet.ShouldProcess("$($Alias -join ', ') on $computer", "Remove aliases")) {
                try {
                    Invoke-Command2 -ComputerName $computer -Credential $Credential -ScriptBlock $scriptblock -ErrorAction Stop -Verbose:$false -ArgumentList $Alias
                } catch {
                    Stop-Function -Message "Failure" -ErrorRecord $_ -Target $computer -Continue
                }
            }
        }
    }
}

tools\dbatools\functions\Remove-DbaCmConnection.ps1

function Remove-DbaCmConnection {
    <#
    .SYNOPSIS
        Removes connection objects from the connection cache used for remote computer management.

    .DESCRIPTION
        Removes connection objects from the connection cache used for remote computer management.

    .PARAMETER ComputerName
        The target computer. Accepts both text as well as the output of Get-DbaCmConnection.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: ComputerManagement, CIM
        Author: Friedrich Weinmann (@FredWeinmann)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Remove-DbaCmConnection

    .EXAMPLE
        PS C:\> Remove-DbaCmConnection -ComputerName sql2014

        Removes the cached connection to the server sql2014 from the cache.

    .EXAMPLE
        PS C:\> Get-DbaCmConnection | Remove-DbaCmConnection

        Clears the entire connection cache.

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'High')]
    param (
        [Parameter(ValueFromPipeline, Mandatory)]
        [Sqlcollaborative.Dbatools.Parameter.DbaCmConnectionParameter[]]
        $ComputerName,

        [switch]
        [Alias('Silent')]$EnableException
    )

    begin {
        Write-Message -Level InternalComment -Message "Starting"
        Write-Message -Level Verbose -Message "Bound parameters: $($PSBoundParameters.Keys -join ", ")"
    }
    process {
        foreach ($connectionObject in $ComputerName) {
            if (-not $connectionObject.Success) { Stop-Function -Message "Failed to interpret computername input: $($connectionObject.InputObject)" -Category InvalidArgument -Target $connectionObject.InputObject -Continue }
            Write-Message -Level VeryVerbose -Message "Removing from connection cache: $($connectionObject.Connection.ComputerName)" -Target $connectionObject.Connection.ComputerName
            if ($Pscmdlet.ShouldProcess($($connectionObject.Connection.ComputerName), "Removing Connection")) {
                if ([Sqlcollaborative.Dbatools.Connection.ConnectionHost]::Connections.ContainsKey($connectionObject.Connection.ComputerName)) {
                    $null = [Sqlcollaborative.Dbatools.Connection.ConnectionHost]::Connections.Remove($connectionObject.Connection.ComputerName)
                    Write-Message -Level Verbose -Message "Successfully removed $($connectionObject.Connection.ComputerName)" -Target $connectionObject.Connection.ComputerName
                } else {
                    Write-Message -Level Verbose -Message "Not found: $($connectionObject.Connection.ComputerName)" -Target $connectionObject.Connection.ComputerName
                }
            }
        }
    }
    end {
        Write-Message -Level InternalComment -Message "Ending"
    }
}

tools\dbatools\functions\Remove-DbaCmsRegServer.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Remove-DbaCmsRegServer {
    <#
    .SYNOPSIS
        Removes registered servers found in SQL Server Central Management Server (CMS).

    .DESCRIPTION
        Removes registered servers found in SQL Server Central Management Server (CMS).

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Name
        Specifies one or more names to include. Name is the visible name in SSMS CMS interface (labeled Registered Server Name)

    .PARAMETER ServerName
        Specifies one or more server names to include. Server Name is the actual instance name (labeled Server Name)

    .PARAMETER Group
        Specifies one or more groups to include from SQL Server Central Management Server.

    .PARAMETER InputObject
        Allows results from Get-DbaCmsRegServer to be piped in

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.

        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.

        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: RegisteredServer, CMS
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Remove-DbaCmsRegServer

    .EXAMPLE
        PS C:\> Remove-DbaCmsRegServer -SqlInstance sql2012 -Group HR, Accounting

        Removes all servers from the HR and Accounting groups on sql2012

    .EXAMPLE
        PS C:\> Remove-DbaCmsRegServer -SqlInstance sql2012 -Group HR\Development

        Removes all servers from the HR and sub-group Development from the CMS on sql2012.

    .EXAMPLE
        PS C:\> Remove-DbaCmsRegServer -SqlInstance sql2012 -Confirm:$false

        Removes all registered servers on sql2012 and turns off all prompting

    #>

    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'High')]
    param (
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$Name,
        [string[]]$ServerName,
        [string[]]$Group,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.RegisteredServers.RegisteredServer[]]$InputObject,
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            $InputObject += Get-DbaCmsRegServer -SqlInstance $instance -SqlCredential $SqlCredential -Group $Group -ExcludeGroup $ExcludeGroup -Name $Name -ServerName $ServerName
        }

        foreach ($regserver in $InputObject) {
            $server = $regserver.Parent

            if ($Pscmdlet.ShouldProcess($regserver.Parent, "Removing $regserver")) {
                $null = $regserver.Drop()
                Disconnect-RegServer -Server $server

                try {
                    [pscustomobject]@{
                        ComputerName = $regserver.ComputerName
                        InstanceName = $regserver.InstanceName
                        SqlInstance  = $regserver.SqlInstance
                        Name         = $regserver.Name
                        ServerName   = $regserver.ServerName
                        Status       = "Dropped"
                    }
                } catch {
                    Stop-Function -Message "Failed to drop $regserver on $server" -ErrorRecord $_ -Continue
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias Remove-DbaRegisteredServer
    }
}

tools\dbatools\functions\Remove-DbaCmsRegServerGroup.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Remove-DbaCmsRegServerGroup {
    <#
    .SYNOPSIS
        Gets list of Server Groups objects stored in SQL Server Central Management Server (CMS).

    .DESCRIPTION
        Returns an array of Server Groups found in the CMS.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Name
        Specifies one or more groups to include from SQL Server Central Management Server.

    .PARAMETER InputObject
        Allows results from Get-DbaCmsRegServerGroup to be piped in

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.

        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.

        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: RegisteredServer, CMS
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Remove-DbaCmsRegServerGroup

    .EXAMPLE
        PS C:\> Remove-DbaCmsRegServerGroup -SqlInstance sql2012 -Group HR, Accounting

        Removes the HR and Accounting groups on sql2012

    .EXAMPLE
        PS C:\> Remove-DbaCmsRegServerGroup -SqlInstance sql2012 -Group HR\Development -Confirm:$false

        Removes the Development subgroup within the HR group on sql2012 and turns off all prompting

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'High')]
    param (
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias("Group")]
        [string[]]$Name,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.RegisteredServers.ServerGroup[]]$InputObject,
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            $InputObject += Get-DbaCmsRegServerGroup -SqlInstance $instance -SqlCredential $SqlCredential -Group $Name
        }

        foreach ($regservergroup in $InputObject) {
            $parentserver = Get-RegServerParent -InputObject $regservergroup

            if ($null -eq $parentserver) {
                Stop-Function -Message "Something went wrong and it's hard to explain, sorry. This basically shouldn't happen." -Continue
            }

            if ($Pscmdlet.ShouldProcess($parentserver.DomainInstanceName, "Removing $($regservergroup.Name) CMS Group")) {
                $null = $parentserver.ServerConnection.ExecuteNonQuery($regservergroup.ScriptDrop().GetScript())
                $parentserver.ServerConnection.Disconnect()
                try {
                    [pscustomobject]@{
                        ComputerName = $parentserver.ComputerName
                        InstanceName = $parentserver.InstanceName
                        SqlInstance  = $parentserver.SqlInstance
                        Name         = $regservergroup.Name
                        Status       = "Dropped"
                    }
                } catch {
                    Stop-Function -Message "Failed to drop $regservergroup on $parentserver" -ErrorRecord $_ -Continue
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias Remove-DbaRegisteredServerGroup
    }
}

tools\dbatools\functions\Remove-DbaComputerCertificate.ps1

function Remove-DbaComputerCertificate {
    <#
    .SYNOPSIS
        Removes a computer certificate - useful for removing easily certs from remote computers

    .DESCRIPTION
        Removes a computer certificate from a local or remote compuer

    .PARAMETER ComputerName
        The target computer. Defaults to localhost.

    .PARAMETER Credential
        Allows you to login to $ComputerName using alternative credentials

    .PARAMETER Thumbprint
        The thumbprint of the certificate object

    .PARAMETER Store
        Certificate store - defaults to LocalMachine (otherwise exceptions can be thrown on remote connections)

    .PARAMETER Folder
        Certificate folder

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .NOTES
        Tags: Certificate
        Author: Chrissy LeMaire (@cl), netnerds.net
        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Remove-DbaComputerCertificate

    .EXAMPLE
        PS C:\> Remove-DbaComputerCertificate -ComputerName Server1 -Thumbprint C2BBE81A94FEE7A26FFF86C2DFDAF6BFD28C6C94

        Removes certificate with thumbprint C2BBE81A94FEE7A26FFF86C2DFDAF6BFD28C6C94 in the LocalMachine store on Server1

    .EXAMPLE
        PS C:\> Get-DbaComputerCertificate | Where-Object Thumbprint -eq E0A071E387396723C45E92D42B2D497C6A182340 | Remove-DbaComputerCertificate

        Removes certificate using the pipeline

    .EXAMPLE
        PS C:\> Remove-DbaComputerCertificate -ComputerName Server1 -Thumbprint C2BBE81A94FEE7A26FFF86C2DFDAF6BFD28C6C94 -Store User -Folder My

        Removes certificate with thumbprint C2BBE81A94FEE7A26FFF86C2DFDAF6BFD28C6C94 in the User\My (Personal) store on Server1

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "High")]
    param (
        [Alias("ServerInstance", "SqlServer", "SqlInstance")]
        [DbaInstanceParameter[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [parameter(ValueFromPipelineByPropertyName, Mandatory)]
        [string[]]$Thumbprint,
        [string]$Store = "LocalMachine",
        [string]$Folder = "My",
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        #region Scriptblock for remoting
        $scriptblock = {
            param (
                $Thumbprint,
                $Store,
                $Folder
            )
            <# DO NOT use Write-Message as this is inside of a script block #>
            Write-Verbose "Searching Cert:\$Store\$Folder for thumbprint: $thumbprint"
            function Get-CoreCertStore {
                [CmdletBinding()]
                param (
                    [ValidateSet("CurrentUser", "LocalMachine")]
                    [string]$Store,
                    [ValidateSet("AddressBook", "AuthRoot, CertificateAuthority", "Disallowed", "My", "Root", "TrustedPeople", "TrustedPublisher")]
                    [string]$Folder,
                    [ValidateSet("ReadOnly", "ReadWrite")]
                    [string]$Flag = "ReadOnly"
                )

                $storename = [System.Security.Cryptography.X509Certificates.StoreLocation]::$Store
                $foldername = [System.Security.Cryptography.X509Certificates.StoreName]::$Folder
                $flags = [System.Security.Cryptography.X509Certificates.OpenFlags]::$Flag
                $certstore = [System.Security.Cryptography.X509Certificates.X509Store]::New($foldername, $storename)
                $certstore.Open($flags)

                $certstore
            }

            function Get-CoreCertificate {
                [CmdletBinding()]
                param (
                    [ValidateSet("CurrentUser", "LocalMachine")]
                    [string]$Store,
                    [ValidateSet("AddressBook", "AuthRoot, CertificateAuthority", "Disallowed", "My", "Root", "TrustedPeople", "TrustedPublisher")]
                    [string]$Folder,
                    [ValidateSet("ReadOnly", "ReadWrite")]
                    [string]$Flag = "ReadOnly",
                    [string[]]$Thumbprint,
                    [System.Security.Cryptography.X509Certificates.X509Store[]]$InputObject
                )

                if (-not $InputObject) {
                    $InputObject += Get-CoreCertStore -Store $Store -Folder $Folder -Flag $Flag
                }

                $certs = ($InputObject).Certificates

                if ($Thumbprint) {
                    $certs = $certs | Where-Object Thumbprint -in $Thumbprint
                }
                $certs
            }

            if ($Thumbprint) {
                try {
                    <# DO NOT use Write-Message as this is inside of a script block #>
                    Write-Verbose "Searching Cert:\$Store\$Folder"
                    $cert = Get-CoreCertificate -Store $Store -Folder $Folder -Thumbprint $Thumbprint
                } catch {
                    # don't care - there's a weird issue with remoting where an exception gets thrown for no apparent reason
                    # here to avoid an empty catch
                    $null = 1
                }
            }

            if ($cert) {
                $certstore = Get-CoreCertStore -Store $Store -Folder $Folder -Flag ReadWrite
                $certstore.Remove($cert)
                $status = "Removed"
            } else {
                $status = "Certificate not found in Cert:\$Store\$Folder"
            }

            [pscustomobject]@{
                ComputerName = $env:COMPUTERNAME
                Store        = $Store
                Folder       = $Folder
                Thumbprint   = $thumbprint
                Status       = $status
            }
        }
        #endregion Scriptblock for remoting
    }

    process {
        foreach ($computer in $computername) {
            foreach ($thumb in $Thumbprint) {
                if ($PScmdlet.ShouldProcess("local", "Connecting to $computer to remove cert from Cert:\$Store\$Folder")) {
                    try {
                        Invoke-Command2 -ComputerName $computer -Credential $Credential -ArgumentList $thumb, $Store, $Folder -ScriptBlock $scriptblock -ErrorAction Stop
                    } catch {
                        Stop-Function -Message $_ -ErrorRecord $_ -Target $computer -Continue
                    }
                }
            }
        }
    }
}

tools\dbatools\functions\Remove-DbaDatabase.ps1

function Remove-DbaDatabase {
    <#
    .SYNOPSIS
        Drops a database, hopefully even the really stuck ones.

    .DESCRIPTION
        Tries a bunch of different ways to remove a database or two or more.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.You must have sysadmin access and server version must be SQL Server version 2000 or higher.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER InputObject
        A collection of databases (such as returned by Get-DbaDatabase), to be removed.

    .PARAMETER IncludeSystemDb
        Use this switch to disable any kind of verbose messages

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Delete, Databases
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Remove-DbaDatabase

    .EXAMPLE
        PS C:\> Remove-DbaDatabase -SqlInstance sql2016 -Database containeddb

        Prompts then removes the database containeddb on SQL Server sql2016

    .EXAMPLE
        PS C:\> Remove-DbaDatabase -SqlInstance sql2016 -Database containeddb, mydb

        Prompts then removes the databases containeddb and mydb on SQL Server sql2016

    .EXAMPLE
        PS C:\> Remove-DbaDatabase -SqlInstance sql2016 -Database containeddb -Confirm:$false

        Does not prompt and swiftly removes containeddb on SQL Server sql2016

    .EXAMPLE
        PS C:\> Get-DbaDatabase -SqlInstance server\instance -ExcludeSystem | Remove-DbaDatabase

        Removes all the user databases from server\instance

    .EXAMPLE
        PS C:\> Get-DbaDatabase -SqlInstance server\instance -ExcludeSystem | Remove-DbaDatabase -Confirm:$false

        Removes all the user databases from server\instance without any confirmation
    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'High', DefaultParameterSetName = "Default")]
    param (
        [parameter(Mandatory, ParameterSetName = "instance")]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]
        $SqlCredential,
        [parameter(Mandatory, ParameterSetName = "instance")]
        [Alias("Databases")]
        [object[]]$Database,
        [Parameter(ValueFromPipeline, Mandatory, ParameterSetName = "databases")]
        [Microsoft.SqlServer.Management.Smo.Database[]]$InputObject,
        [switch]$IncludeSystemDb,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {

        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }
            $InputObject += $server.Databases | Where-Object { $_.Name -in $Database }
        }

        $system_dbs = @( "master", "model", "tempdb", "resource", "msdb" )

        if (-not($IncludeSystemDb)) {
            $InputObject = $InputObject | Where-Object { $_.Name -notin $system_dbs}
        }

        foreach ($db in $InputObject) {
            try {
                $server = $db.Parent
                if ($Pscmdlet.ShouldProcess("$db on $server", "KillDatabase")) {
                    $server.KillDatabase($db.name)
                    $server.Refresh()

                    [pscustomobject]@{
                        ComputerName = $server.ComputerName
                        InstanceName = $server.ServiceName
                        SqlInstance  = $server.DomainInstanceName
                        Database     = $db.name
                        Status       = "Dropped"
                    }
                }
            } catch {
                try {
                    if ($Pscmdlet.ShouldProcess("$db on $server", "alter db set single_user with rollback immediate then drop")) {
                        $null = $server.Query("if exists (select * from sys.databases where name = '$($db.name)' and state = 0) alter database $db set single_user with rollback immediate; drop database $db")

                        [pscustomobject]@{
                            ComputerName = $server.ComputerName
                            InstanceName = $server.ServiceName
                            SqlInstance  = $server.DomainInstanceName
                            Database     = $db.name
                            Status       = "Dropped"
                        }
                    }
                } catch {
                    try {
                        if ($Pscmdlet.ShouldProcess("$db on $server", "SMO drop")) {
                            $dbname = $db.Name
                            $db.Parent.databases[$dbname].Drop()
                            $server.Refresh()

                            [pscustomobject]@{
                                ComputerName = $server.ComputerName
                                InstanceName = $server.ServiceName
                                SqlInstance  = $server.DomainInstanceName
                                Database     = $db.name
                                Status       = "Dropped"
                            }
                        }
                    } catch {
                        Write-Message -Level Verbose -Message "Could not drop database $db on $server"

                        [pscustomobject]@{
                            ComputerName = $server.ComputerName
                            InstanceName = $server.ServiceName
                            SqlInstance  = $server.DomainInstanceName
                            Database     = $db.name
                            Status       = (Get-ErrorMessage -Record $_)
                        }
                    }
                }
            }
        }
    }
}

tools\dbatools\functions\Remove-DbaDatabaseSafely.ps1

function Remove-DbaDatabaseSafely {
    <#
    .SYNOPSIS
        Safely removes a SQL Database and creates an Agent Job to restore it.

    .DESCRIPTION
        Performs a DBCC CHECKDB on the database, backs up the database with Checksum and verify only to a final (golden) backup location, creates an Agent Job to restore from that backup, drops the database, runs the agent job to restore the database, performs a DBCC CHECKDB and drops the database.

        With huge thanks to Grant Fritchey and his verify your backups video. Take a look, it's only 3 minutes long. http://sqlps.io/backuprant

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2000 or higher.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Destination
        If specified, Agent jobs will be created on this server. By default, the jobs will be created on the server specified by SqlInstance. You must have sysadmin access and the server must be SQL Server 2000 or higher. The SQL Agent service will be started if it is not already running.

    .PARAMETER DestinationCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        Specifies one or more databases to remove.

    .PARAMETER NoDbccCheckDb
        If this switch is enabled, the initial DBCC CHECK DB will be skipped. This will make the process quicker but will also allow you to create an Agent job that restores a database backup containing a corrupt database.

        A second DBCC CHECKDB is performed on the restored database so you will still be notified BUT USE THIS WITH CARE.

    .PARAMETER BackupFolder
        Specifies the path to a folder where the final backups of the removed databases will be stored. If you are using separate source and destination servers, you must specify a UNC path such as  \\SERVER1\BACKUPSHARE\

    .PARAMETER JobOwner
        Specifies the name of the account which will own the Agent jobs. By default, sa is used.

    .PARAMETER UseDefaultFilePaths
        If this switch is enabled, the default file paths for the data and log files on the instance where the database is restored will be used. By default, the original file paths will be used.

    .PARAMETER CategoryName
        Specifies the Category Name for the Agent job that is created for restoring the database(s). By default, the name is "Rationalisation".

    .PARAMETER BackupCompression
        If this switch is enabled, compression will be used for the backup regardless of the SQL Server instance setting. By default, the SQL Server instance setting for backup compression is used.

    .PARAMETER AllDatabases
        If this switch is enabled, all user databases on the server will be removed. This is useful when decommissioning a server. You should use a Destination with this switch.

    .PARAMETER ReuseSourceFolderStructure
        If this switch is enabled, the source folder structure will be used when restoring instead of using the destination instance default folder structure.

    .PARAMETER Force
        If this switch is enabled, all actions will be performed even if DBCC errors are detected. An Agent job will be created with 'DBCCERROR' in the name and the backup file will have 'DBCC' in its name.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Database, Remove
        Author: Rob Sewell (@SQLDBAWithBeard), sqldbawithabeard.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Remove-DbaDatabaseSafely

    .EXAMPLE
        PS C:\> Remove-DbaDatabaseSafely -SqlInstance 'Fade2Black' -Database RideTheLightning -BackupFolder 'C:\MSSQL\Backup\Rationalised - DO NOT DELETE'

        Performs a DBCC CHECKDB on database RideTheLightning on server Fade2Black. If there are no errors, the database is backup to the folder C:\MSSQL\Backup\Rationalised - DO NOT DELETE. Then, an Agent job to restore the database from that backup is created. The database is then dropped, the Agent job to restore it run, a DBCC CHECKDB run against the restored database, and then it is dropped again.

        Any DBCC errors will be written to your documents folder

    .EXAMPLE
        PS C:\> $Database = 'DemoNCIndex','RemoveTestDatabase'
        PS C:\> Remove-DbaDatabaseSafely -SqlInstance 'Fade2Black' -Database $Database -BackupFolder 'C:\MSSQL\Backup\Rationalised - DO NOT DELETE'

        Performs a DBCC CHECKDB on two databases, 'DemoNCIndex' and 'RemoveTestDatabase' on server Fade2Black. Then, an Agent job to restore each database from those backups is created. The databases are then dropped, the Agent jobs to restore them run, a DBCC CHECKDB run against the restored databases, and then they are dropped again.

        Any DBCC errors will be written to your documents folder

    .EXAMPLE
        PS C:\> Remove-DbaDatabaseSafely -SqlInstance 'Fade2Black' -Destination JusticeForAll -Database RideTheLightning -BackupFolder '\\BACKUPSERVER\BACKUPSHARE\MSSQL\Rationalised - DO NOT DELETE'

        Performs a DBCC CHECKDB on database RideTheLightning on server Fade2Black. If there are no errors, the database is backup to the folder \\BACKUPSERVER\BACKUPSHARE\MSSQL\Rationalised - DO NOT DELETE . Then, an Agent job is created on server JusticeForAll to restore the database from that backup is created. The database is then dropped on Fade2Black, the Agent job to restore it on JusticeForAll is run, a DBCC CHECKDB run against the restored database, and then it is dropped from JusticeForAll.

        Any DBCC errors will be written to your documents folder

    .EXAMPLE
        PS C:\> Remove-DbaDatabaseSafely -SqlInstance IronMaiden -Database $Database -Destination TheWildHearts -BackupFolder Z:\Backups -NoDbccCheckDb -JobOwner 'THEBEARD\Rob'

        For the databases $Database on the server IronMaiden a DBCC CHECKDB will not be performed before backing up the databases to the folder Z:\Backups. Then, an Agent job is created on server TheWildHearts with a Job Owner of THEBEARD\Rob to restore each database from that backup using the instance's default file paths. The database(s) is(are) then dropped on IronMaiden, the Agent job(s) run, a DBCC CHECKDB run on the restored database(s), and then the database(s) is(are) dropped.

    .EXAMPLE
        PS C:\> Remove-DbaDatabaseSafely -SqlInstance IronMaiden -Database $Database -Destination TheWildHearts -BackupFolder Z:\Backups

        The databases $Database on the server IronMaiden will be backed up the to the folder Z:\Backups. Then, an Agent job is created on server TheWildHearts with a Job Owner of THEBEARD\Rob to restore each database from that backup using the instance's default file paths. The database(s) is(are) then dropped on IronMaiden, the Agent job(s) run, a DBCC CHECKDB run on the restored database(s), and then the database(s) is(are) dropped.

        If there is a DBCC Error, the function  will continue to perform rest of the actions and will create an Agent job with 'DBCCERROR' in the name and a Backup file with 'DBCCError' in the name.

    #>
    [CmdletBinding(SupportsShouldProcess, DefaultParameterSetName = "Default")]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]
        $SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [DbaInstanceParameter]$Destination = $sqlinstance,
        [PSCredential]
        $DestinationCredential,
        [Alias("NoCheck")]
        [switch]$NoDbccCheckDb,
        [parameter(Mandatory)]
        [string]$BackupFolder,
        [string]$CategoryName = 'Rationalisation',
        [string]$JobOwner,
        [switch]$AllDatabases,
        [ValidateSet("Default", "On", "Of")]
        [string]$BackupCompression = 'Default',
        [switch]$ReuseSourceFolderStructure,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        if (!$AllDatabases -and !$Database) {
            Stop-Function -Message "You must specify at least one database. Use -Database or -AllDatabases." -ErrorRecord $_
            return
        }

        $sourceserver = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $sqlCredential -ParameterConnection

        if (-not $destination) {
            $destination = $sqlinstance
            $DestinationCredential = $SqlCredential
        }

        if ($sqlinstance -ne $destination) {

            $destserver = Connect-SqlInstance -SqlInstance $destination -SqlCredential $DestinationCredential

            $sourcenb = $instance.ComputerName
            $destnb = $instance.ComputerName

            if ($BackupFolder.StartsWith("\\") -eq $false -and $sourcenb -ne $destnb) {
                Stop-Function -Message "Backup folder must be a network share if the source and destination servers are not the same." -ErrorRecord $_ -Target $backupFolder
                return
            }
        } else {
            $destserver = $sourceserver
        }

        $source = $sourceserver.DomainInstanceName
        $destination = $destserver.DomainInstanceName

        if (!$jobowner) {
            $jobowner = Get-SqlSaLogin $destserver
        }

        if ($alldatabases -or !$Database) {
            $database = ($sourceserver.databases | Where-Object { $_.IsSystemObject -eq $false -and ($_.Status -match 'Offline') -eq $false }).Name
        }

        if (!(Test-DbaPath -SqlInstance $destserver -Path $backupFolder)) {
            $serviceaccount = $destserver.ServiceAccount
            Stop-Function -Message "Can't access $backupFolder Please check if $serviceaccount has permissions." -ErrorRecord $_ -Target $backupFolder
        }

        $jobname = "Rationalised Final Database Restore for $dbname"
        $jobStepName = "Restore the $dbname database from Final Backup"

        if (!($destserver.Logins | Where-Object { $_.Name -eq $jobowner })) {
            Stop-Function -Message "$destination does not contain the login $jobowner - Please fix and try again - Aborting." -ErrorRecord $_ -Target $jobowner
        }

        function Start-SqlAgent {
            <#
                .SYNOPSIS
            #>
            [CmdletBinding(SupportsShouldProcess)]
            param ()
            if ($destserver.VersionMajor -eq 8) {
                $serviceName = 'MSSQLSERVER'
            } else {
                $instance = $destserver.InstanceName
                if ($instance.length -eq 0) { $instance = "MSSQLSERVER" }
                $serviceName = "SQL Server Agent ($instance)"
            }

            if ($Pscmdlet.ShouldProcess($destination, "Starting Sql Agent")) {
                try {
                    $ipaddr = Resolve-SqlIpAddress $destserver
                    $agentservice = Get-Service -ComputerName $ipaddr -DisplayName $serviceName

                    if ($agentservice.Status -ne 'Running') {
                        $agentservice.Start()
                        $timeout = New-Timespan -seconds 60
                        $sw = [diagnostics.stopwatch]::StartNew()
                        $agentstatus = (Get-Service -ComputerName $ipaddr -DisplayName $serviceName).Status
                        while ($AgentStatus -ne 'Running' -and $sw.elapsed -lt $timeout) {
                            $agentStatus = (Get-Service -ComputerName $ipaddr -DisplayName $serviceName).Status
                        }
                    }
                }

                catch {
                    throw $_
                }

                if ($agentservice.Status -ne 'Running') {
                    throw "Cannot start Agent Service on $destination - Aborting."
                }
            }
        }

        function Start-DbccCheck {
            <#
            .SYNOPSIS

            #>

            [CmdletBinding(SupportsShouldProcess)]
            param (
                [object]$server,
                [string]$dbname
            )

            $servername = $server.name
            $db = $server.databases[$dbname]

            if ($Pscmdlet.ShouldProcess($sourceserver, "Running dbcc check on $dbname on $servername")) {
                try {
                    $null = $db.CheckTables('None')
                    Write-Message -Level Verbose -Message "DBCC CHECKDB finished successfully for $dbname on $servername."
                }

                catch {
                    Write-Message -Level Warning -Message "DBCC CHECKDB failed."
                    Stop-Function -Message "Error occured: $_" -Target $agentservice -ErrorRecord $_ -Continue

                    if ($force) {
                        return $true
                    } else {
                        return $false
                    }
                }
            }
        }

        function New-SqlAgentJobCategory {
            <#
                .SYNOPSIS

            #>
            [CmdletBinding(SupportsShouldProcess)]
            param ([string]$categoryname,
                [object]$jobServer)

            if (!$jobServer.JobCategories[$categoryname]) {
                if ($Pscmdlet.ShouldProcess($sourceserver, "Running dbcc check on $dbname on $sourceserver")) {
                    try {
                        Write-Message -Level Verbose -Message "Creating Agent Job Category $categoryname."
                        $category = New-Object Microsoft.SqlServer.Management.Smo.Agent.JobCategory
                        $category.Parent = $jobServer
                        $category.Name = $categoryname
                        $category.Create()
                        Write-Message -Level Verbose -Message "Created Agent Job Category $categoryname."
                    } catch {
                        Stop-Function -Message "FAILED : To Create Agent Job Category - $categoryname - Aborting." -Target $categoryname -ErrorRecord $_
                        return
                    }
                }
            }
        }

        function Restore-Database {
            <#
                .SYNOPSIS
                    Internal function. Restores .bak file to Sql database. Creates db if it doesn't exist. $filestructure is
                a custom object that contains logical and physical file locations.
            #>

            param (
                [Parameter(Mandatory)]
                [Alias('ServerInstance', 'SqlInstance', 'SqlServer')]
                [object]$server,
                [Parameter(Mandatory)]
                [ValidateNotNullOrEmpty()]
                [string]$dbname,
                [Parameter(Mandatory)]
                [string]$backupfile,
                [string]$filetype = 'Database',
                [Parameter(Mandatory)]
                [object]$filestructure,
                [switch]$norecovery,
                [PSCredential]$sqlCredential,
                [switch]$TSql = $false
            )

            $server = Connect-SqlInstance -SqlInstance $server -SqlCredential $sqlCredential
            $servername = $server.name
            $server.ConnectionContext.StatementTimeout = 0
            $restore = New-Object 'Microsoft.SqlServer.Management.Smo.Restore'
            $restore.ReplaceDatabase = $true

            foreach ($file in $filestructure.values) {
                $movefile = New-Object 'Microsoft.SqlServer.Management.Smo.RelocateFile'
                $movefile.LogicalFileName = $file.logical
                $movefile.PhysicalFileName = $file.physical
                $null = $restore.RelocateFiles.Add($movefile)
            }

            try {
                if ($TSql) {
                    $restore.PercentCompleteNotification = 1
                    $restore.add_Complete($complete)
                    $restore.ReplaceDatabase = $true
                    $restore.Database = $dbname
                    $restore.Action = $filetype
                    $restore.NoRecovery = $norecovery
                    $device = New-Object -TypeName Microsoft.SqlServer.Management.Smo.BackupDeviceItem
                    $device.name = $backupfile
                    $device.devicetype = 'File'
                    $restore.Devices.Add($device)
                    $restorescript = $restore.script($server)
                    return $restorescript
                } else {
                    $percent = [Microsoft.SqlServer.Management.Smo.PercentCompleteEventHandler] {
                        Write-Progress -id 1 -activity "Restoring $dbname to $servername" -percentcomplete $_.Percent -status ([System.String]::Format("Progress: {0} %", $_.Percent))
                    }
                    $restore.add_PercentComplete($percent)
                    $restore.PercentCompleteNotification = 1
                    $restore.add_Complete($complete)
                    $restore.ReplaceDatabase = $true
                    $restore.Database = $dbname
                    $restore.Action = $filetype
                    $restore.NoRecovery = $norecovery
                    $device = New-Object -TypeName Microsoft.SqlServer.Management.Smo.BackupDeviceItem
                    $device.name = $backupfile
                    $device.devicetype = 'File'
                    $restore.Devices.Add($device)

                    Write-Progress -id 1 -activity "Restoring $dbname to $servername" -percentcomplete 0 -status ([System.String]::Format("Progress: {0} %", 0))
                    $restore.sqlrestore($server)
                    Write-Progress -id 1 -activity "Restoring $dbname to $servername" -status 'Complete' -Completed

                    return $true
                }
            } catch {
                Stop-Function -Message "Restore failed" -ErrorRecord $_ -Target $dbname
                return $false
            }
        }

    }
    process {
        if (Test-FunctionInterrupt) {
            return
        }
        try {
            Start-SqlAgent
        } catch {
            Stop-Function -Message "Failure starting SQL Agent" -ErrorRecord $_
            return
        }

        $start = Get-Date
        Write-Message -Level Verbose -Message "Starting Rationalisation Script at $start."

        foreach ($dbname in $Database) {

            $db = $sourceserver.databases[$dbname]

            # The db check is needed when the number of databases exceeds 255, then it's no longer auto-populated
            if (!$db) {
                Stop-Function -Message "$dbname does not exist on $source. Aborting routine for this database." -Continue
            }

            $lastFullBckDuration = (Get-DbaBackupHistory -SqlInstance $sourceserver -Database $dbname -LastFull).Duration

            if (-NOT ([string]::IsNullOrEmpty($lastFullBckDuration))) {
                $lastFullBckDurationSec = $lastFullBckDuration.TotalSeconds
                $lastFullBckDurationMin = [Math]::Round($lastFullBckDuration.TotalMinutes, 2)

                Write-Message -Level Verbose -Message "From the backup history the last full backup took $lastFullBckDurationSec seconds ($lastFullBckDurationMin minutes)"
                if ($lastFullBckDurationSec -gt 600) {
                    Write-Message -Level Verbose -Message "Last full backup took more than 10 minutes. Do you want to continue?"

                    # Set up the parts for the user choice
                    $Title = "Backup duration"
                    $Info = "Last full backup took more than $lastFullBckDurationMin minutes. Do you want to continue?"

                    $Options = [System.Management.Automation.Host.ChoiceDescription[]] @("&Yes", "&No (Skip)")
                    [int]$Defaultchoice = 0
                    $choice = $host.UI.PromptForChoice($Title, $Info, $Options, $Defaultchoice)
                    # Check the given option
                    if ($choice -eq 1) {
                        Stop-Function -Message "You have chosen skipping the database $dbname because of last known backup time ($lastFullBckDurationMin minutes)." -ErrorRecord $_ -Target $dbname -Continue
                        Continue
                    }
                }
            } else {
                Write-Message -Level Verbose -Message "Couldn't find last full backup time for database $dbname using Get-DbaBackupHistory."
            }

            $jobname = "Rationalised Database Restore Script for $dbname"
            $jobStepName = "Restore the $dbname database from Final Backup"
            $jobServer = $destserver.JobServer

            if ($jobServer.Jobs[$jobname].count -gt 0) {
                if ($force -eq $false) {
                    Stop-Function -Message "FAILED: The Job $jobname already exists. Have you done this before? Rename the existing job and try again or use -Force to drop and recreate." -Continue
                } else {
                    if ($Pscmdlet.ShouldProcess($dbname, "Dropping $jobname on $source")) {
                        Write-Message -Level Verbose -Message "Dropping $jobname on $source."
                        $jobServer.Jobs[$jobname].Drop()
                        $jobServer.Jobs.Refresh()
                    }
                }
            }


            Write-Message -Level Verbose -Message "Starting Rationalisation of $dbname."
            ## if we want to Dbcc before to abort if we have a corrupt database to start with
            if ($NoDbccCheckDb -eq $false) {
                if ($Pscmdlet.ShouldProcess($dbname, "Running dbcc check on $dbname on $source")) {
                    Write-Message -Level Verbose -Message "Starting DBCC CHECKDB for $dbname on $source."
                    $dbccgood = Start-DbccCheck -Server $sourceserver -DBName $dbname

                    if ($dbccgood -eq $false) {
                        if ($force -eq $false) {
                            Write-Message -Level Verbose -Message "DBCC failed for $dbname (you should check that).  Aborting routine for this database."
                            continue
                        } else {
                            Write-Message -Level Verbose -Message "DBCC failed, but Force specified. Continuing."
                        }
                    }
                }
            }

            if ($Pscmdlet.ShouldProcess($source, "Backing up $dbname")) {
                Write-Message -Level Verbose -Message "Starting Backup for $dbname on $source."
                ## Take a Backup
                try {
                    $timenow = [DateTime]::Now.ToString('yyyyMMdd_HHmmss')
                    $backup = New-Object -TypeName Microsoft.SqlServer.Management.Smo.Backup
                    $backup.Action = [Microsoft.SqlServer.Management.SMO.BackupActionType]::Database
                    $backup.BackupSetDescription = "Final Full Backup of $dbname Prior to Dropping"
                    $backup.Database = $dbname
                    $backup.Checksum = $True
                    if ($sourceserver.versionMajor -gt 9) {
                        $backup.CompressionOption = $BackupCompression
                    }
                    if ($force -and $dbccgood -eq $false) {

                        $filename = "$backupFolder\$($dbname)_DBCCERROR_$timenow.bak"
                    } else {
                        $filename = "$backupFolder\$($dbname)_Final_Before_Drop_$timenow.bak"
                    }

                    $devicetype = [Microsoft.SqlServer.Management.Smo.DeviceType]::File
                    $backupDevice = New-Object -TypeName Microsoft.SqlServer.Management.Smo.BackupDeviceItem($filename, $devicetype)

                    $backup.Devices.Add($backupDevice)
                    #Progress
                    $percent = [Microsoft.SqlServer.Management.Smo.PercentCompleteEventHandler] {
                        Write-Progress -id 1 -activity "Backing up database $dbname on $source to $filename" -percentcomplete $_.Percent -status ([System.String]::Format("Progress: {0} %", $_.Percent))
                    }
                    $backup.add_PercentComplete($percent)
                    $backup.add_Complete($complete)
                    Write-Progress -id 1 -activity "Backing up database $dbname on $source to $filename" -percentcomplete 0 -status ([System.String]::Format("Progress: {0} %", 0))
                    $backup.SqlBackup($sourceserver)
                    $null = $backup.Devices.Remove($backupDevice)
                    Write-Progress -id 1 -activity "Backing up database $dbname  on $source to $filename" -status "Complete" -Completed
                    Write-Message -Level Verbose -Message "Backup Completed for $dbname on $source."

                    Write-Message -Level Verbose -Message "Running Restore Verify only on Backup of $dbname on $source."
                    try {
                        $restoreverify = New-Object 'Microsoft.SqlServer.Management.Smo.Restore'
                        $restoreverify.Database = $dbname
                        $restoreverify.Devices.AddDevice($filename, $devicetype)
                        $result = $restoreverify.SqlVerify($sourceserver)

                        if ($result -eq $false) {
                            Write-Message -Level Warning -Message "FAILED : Restore Verify Only failed for $filename on $server - aborting routine for this database."
                            continue
                        }

                        Write-Message -Level Verbose -Message "Restore Verify Only for $filename succeeded."
                    } catch {
                        Stop-Function -Message "FAILED : Restore Verify Only failed for $filename on $server - aborting routine for this database. Exception: $_" -Target $filename -ErrorRecord $_ -Continue
                    }
                } catch {
                    Stop-Function -Message "FAILED : Restore Verify Only failed for $filename on $server - aborting routine for this database. Exception: $_" -Target $filename -ErrorRecord $_ -Continue
                }
            }

            if ($Pscmdlet.ShouldProcess($destination, "Creating Automated Restore Job from Golden Backup for $dbname on $destination")) {
                Write-Message -Level Verbose -Message "Creating Automated Restore Job from Golden Backup for $dbname on $destination."
                try {
                    if ($force -eq $true -and $dbccgood -eq $false) {
                        $jobName = $jobname -replace "Rationalised", "DBCC ERROR"
                    }

                    ## Create an agent job to restore the database
                    $job = New-Object Microsoft.SqlServer.Management.Smo.Agent.Job $jobServer, $jobname
                    $job.Name = $jobname
                    $job.OwnerLoginName = $jobowner
                    $job.Description = "This job will restore the $dbname database using the final backup located at $filename."

                    ## Create a Job Category
                    if (!$jobServer.JobCategories[$categoryname]) {
                        New-SqlAgentJobCategory -JobServer $jobServer -categoryname $categoryname
                    }

                    $job.Category = $categoryname
                    try {
                        if ($Pscmdlet.ShouldProcess($destination, "Creating Agent Job on $destination")) {
                            Write-Message -Level Verbose -Message "Created Agent Job $jobname on $destination."
                            $job.Create()
                        }
                    } catch {
                        Stop-Function -Message "FAILED : To Create Agent Job $jobname on $destination - aborting routine for this database." -Target $categoryname -ErrorRecord $_ -Continue
                    }

                    ## Create Job Step
                    ## Aaron's Suggestion: In the restore script, add a comment block that tells the last known size of each file in the database.
                    ## Suggestion check for disk space before restore
                    ## Create Restore Script
                    try {
                        $restore = New-Object Microsoft.SqlServer.Management.Smo.Restore
                        $device = New-Object -TypeName Microsoft.SqlServer.Management.Smo.BackupDeviceItem $filename, 'FILE'
                        $restore.Devices.Add($device)
                        try {
                            $filelist = $restore.ReadFileList($destserver)
                        }

                        catch {
                            throw 'File list could not be determined. This is likely due to connectivity issues or tiemouts with the Sql Server, the database version is incorrect, or the Sql Server service account does not have access to the file share. Script terminating.'
                        }

                        $filestructure = Get-OfflineSqlFileStructure $destserver $dbname $filelist $ReuseSourceFolderStructure

                        $jobStepCommand = Restore-Database $destserver $dbname $filename "Database" $filestructure -TSql -ErrorAction Stop
                        $jobStep = new-object Microsoft.SqlServer.Management.Smo.Agent.JobStep $job, $jobStepName
                        $jobStep.SubSystem = 'TransactSql' # 'PowerShell'
                        $jobStep.DatabaseName = 'master'
                        $jobStep.Command = $jobStepCommand
                        $jobStep.OnSuccessAction = 'QuitWithSuccess'
                        $jobStep.OnFailAction = 'QuitWithFailure'
                        if ($Pscmdlet.ShouldProcess($destination, "Creating Agent JobStep on $destination")) {
                            $null = $jobStep.Create()
                        }
                        $jobStartStepid = $jobStep.ID
                        Write-Message -Level Verbose -Message "Created Agent JobStep $jobStepName on $destination."
                    } catch {
                        Stop-Function -Message "FAILED : To Create Agent JobStep $jobStepName on $destination - Aborting." -Target $jobStepName -ErrorRecord $_ -Continue
                    }
                    if ($Pscmdlet.ShouldProcess($destination, "Applying Agent Job $jobname to $destination")) {
                        $job.ApplyToTargetServer($destination)
                        $job.StartStepID = $jobStartStepid
                        $job.Alter()
                    }
                } catch {
                    Stop-Function -Message "FAILED : To Create Agent Job $jobname on $destination - aborting routine for $dbname. Exception: $_" -Target $jobname -ErrorRecord $_ -Continue
                }
            }

            if ($Pscmdlet.ShouldProcess($destination, "Dropping Database $dbname on $sourceserver")) {
                ## Drop the database
                try {
                    $null = Remove-DbaDatabase -SqlInstance $sourceserver -Database $dbname -Confirm:$false
                    Write-Message -Level Verbose -Message "Dropped $dbname Database on $source prior to running the Agent Job"
                } catch {
                    Stop-Function -Message "FAILED : To Drop database $dbname on $server - aborting routine for $dbname. Exception: $_" -Continue
                }
            }

            if ($Pscmdlet.ShouldProcess($destination, "Running Agent Job on $destination to restore $dbname")) {
                ## Run the restore job to restore it
                Write-Message -Level Verbose -Message "Starting $jobname on $destination."
                try {
                    $job = $destserver.JobServer.Jobs[$jobname]
                    $job.Start()
                    $job.Refresh()
                    $status = $job.CurrentRunStatus

                    while ($status -ne 'Idle') {
                        Write-Message -Level Verbose -Message "Restore Job for $dbname on $destination is $status."
                        Start-Sleep -Seconds 15
                        $job.Refresh()
                        $status = $job.CurrentRunStatus
                    }

                    Write-Message -Level Verbose -Message "Restore Job $jobname has completed on $destination."
                    Write-Message -Level Verbose -Message "Sleeping for a few seconds to ensure the next step (DBCC) succeeds."
                    Start-Sleep -Seconds 10 ## This is required to ensure the next DBCC Check succeeds
                } catch {
                    Stop-Function -Message "FAILED : Restore Job $jobname failed on $destination - aborting routine for $dbname. Exception: $_" -Continue
                }

                if ($job.LastRunOutcome -ne 'Succeeded') {
                    # LOL, love the plug.
                    Write-Message -Level Warning -Message "FAILED : Restore Job $jobname failed on $destination - aborting routine for $dbname."
                    Write-Message -Level Warning -Message "Check the Agent Job History on $destination - if you have SSMS2016 July release or later."
                    Write-Message -Level Warning -Message "Get-SqlAgentJobHistory -JobName '$jobname' -ServerInstance $destination -OutcomesType Failed."
                    continue
                }
            }

            $refreshRetries = 1

            while ($null -eq ($destserver.databases[$dbname]) -and $refreshRetries -lt 6) {
                Write-Message -Level verbose -Message "Database $dbname not found! Refreshing collection."

                #refresh database list, otherwise the next step (DBCC) can fail
                $destserver.Databases.Refresh()

                Start-Sleep -Seconds 1

                $refreshRetries += 1
            }


            ## Run a Dbcc No choice here
            if ($Pscmdlet.ShouldProcess($dbname, "Running Dbcc CHECKDB on $dbname on $destination")) {
                Write-Message -Level Verbose -Message "Starting Dbcc CHECKDB for $dbname on $destination."
                $null = Start-DbccCheck -Server $destserver -DbName $dbname
            }

            if ($Pscmdlet.ShouldProcess($dbname, "Dropping Database $dbname on $destination")) {
                ## Drop the database
                try {
                    $null = Remove-DbaDatabase -SqlInstance $sourceserver -Database $dbname -Confirm:$false
                    Write-Message -Level Verbose -Message "Dropped $dbname database on $destination."
                } catch {
                    Stop-Function -Message "FAILED : To Drop database $dbname on $destination - Aborting. Exception: $_" -Target $dbname -ErrorRecord $_ -Continue
                }
            }
            Write-Message -Level Verbose -Message "Rationalisation Finished for $dbname."

            [PSCustomObject]@{
                SqlInstance     = $source
                DatabaseName    = $dbname
                JobName         = $jobname
                TestingInstance = $destination
                BackupFolder    = $backupFolder
            }
        }
    }

    end {
        if (Test-FunctionInterrupt) {
            return
        }
        if ($Pscmdlet.ShouldProcess("console", "Showing final message")) {
            $End = Get-Date
            Write-Message -Level Verbose -Message "Finished at $End."
            $Duration = $End - $start
            Write-Message -Level Verbose -Message "Script Duration: $Duration."
        }

        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Remove-SqlDatabaseSafely
    }
}

tools\dbatools\functions\Remove-DbaDbBackupRestoreHistory.ps1

function Remove-DbaDbBackupRestoreHistory {
    <#
    .SYNOPSIS
        Reduces the size of the backup and restore history tables by deleting old entries for backup sets.

    .DESCRIPTION
        Reduces the size of the backup and restore history tables by deleting the entries for backup sets.

        Can be used at server level, in this case a retention period -KeepDays can be set (default is 30 days).
        Can also be used at database level, in this case the complete history for the database(s) is deleted.

        The backup and restore history tables reside in the msdb database.

        To periodically remove old data from backup and restore history tables it is recommended to schedule the agent job sp_delete_backuphistory from the
        SQL Server Maintenance Solution created by Ola Hallengren (https://ola.hallengren.com).

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2000 or higher.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER KeepDays
        The number of days of history to keep. Defaults to 30 days.

    .PARAMETER Database
        The database(s) to process. If unspecified, all databases will be processed.

    .PARAMETER InputObject
        Enables piped input from Get-DbaDatabase

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Delete
        Author: IJeb Reitsma

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Remove-DbaDbBackupRestoreHistory

    .EXAMPLE
        PS C:\> Remove-DbaDbBackupRestoreHistory -SqlInstance sql2016

        Prompts for confirmation then deletes backup and restore history on SQL Server sql2016 older than 30 days (default period)

        PS C:\> Remove-DbaDbBackupRestoreHistory -SqlInstance sql2016 -KeepDays 100 -Confirm:$false

        Remove backup and restore history on SQL Server sql2016 older than 100 days. Does not prompt for confirmation.

        PS C:\> Remove-DbaDbBackupRestoreHistory -SqlInstance sql2016 -Database db1

        Prompts for confirmation then deletes all backup and restore history for database db1 on SQL Server sql2016

        PS C:\> Get-DbaDatabase -SqlInstance sql2016 | Remove-DbaDbBackupRestoreHistory -WhatIf

        Remove complete backup and restore history for all databases on SQL Server sql2016
    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'High')]
    param (
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [int]$KeepDays,
        [string[]]$Database,
        [Parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Database[]]$InputObject,
        [switch]$EnableException
    )

    begin {
        if (-not $KeepDays -and -not $Database) {
            $KeepDays = 30
        }
        $odt = (Get-Date).AddDays(-$KeepDays)
    }

    process {
        if ($KeepDays -and $Database) {
            Stop-Function -Message "KeepDays cannot be used with Database. When Database is specified, all backup/restore history for that database is deleted."
            return
        }
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }
            if (-not $Database) {
                try {
                    if ($Pscmdlet.ShouldProcess($server, "Remove backup/restore history before $($odt) for all databases")) {
                        # While this method is named DeleteBackupHistory, it also removes restore history
                        $server.DeleteBackupHistory($odt)
                        $server.Refresh()
                    }
                } catch {
                    Stop-Function -Message "Could not remove backup/restore history on $server" -Continue
                }
            } else {
                $InputObject += $server.Databases | Where-Object { $_.Name -in $Database }
            }
        }

        foreach ($db in $InputObject) {
            try {
                $servername = $db.Parent.Name
                if ($Pscmdlet.ShouldProcess("$db on $servername", "Remove complete backup/restore history")) {
                    # While this method is named DeleteBackupHistory, it also removes restore history
                    $db.DropBackupHistory()
                    $db.Refresh()
                }
            } catch {
                Stop-Function -Message "Could not remove backup/restore history for database $db on $servername" -Continue
            }
        }
    }
}

tools\dbatools\functions\Remove-DbaDbCertificate.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Remove-DbaDbCertificate {
    <#
    .SYNOPSIS
        Deletes specified database certificate

    .DESCRIPTION
        Deletes specified database certificate

    .PARAMETER SqlInstance
        The SQL Server to create the certificates on.

    .PARAMETER SqlCredential
        Allows you to login to SQL Server using alternative credentials.

    .PARAMETER Database
        The database where the certificate will be removed.

    .PARAMETER Certificate
        The certificate that will be removed

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER InputObject
        Piped certificate objects

    .NOTES
        Tags: Certificate
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Remove-DbaDbCertificate -SqlInstance Server1

        The certificate in the master database on server1 will be removed if it exists.

    .EXAMPLE
        PS C:\> Remove-DbaDbCertificate -SqlInstance Server1 -Database db1 -Confirm:$false

        Suppresses all prompts to remove the certificate in the 'db1' database and drops the key.

    #>
    [CmdletBinding(DefaultParameterSetName = "Default", SupportsShouldProcess, ConfirmImpact = "High")]
    param (
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$Database,
        [string[]]$Certificate,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Certificate[]]$InputObject,
        [switch]$EnableException
    )
    begin {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias Remove-DbaDatabaseCertificate
    }
    process {
        if ($SqlInstance) {
            $InputObject += Get-DbaDbCertificate -SqlInstance $SqlInstance -SqlCredential $SqlCredential -Certificate $Certificate -Database $Database
        }
        foreach ($cert in $InputObject) {
            $db = $cert.Parent
            $server = $db.Parent

            if ($Pscmdlet.ShouldProcess($server.Name, "Dropping the certificate named $cert for database $db")) {
                try {
                    # erroractionprefs are not invoked for .net methods suddenly (??), so use Invoke-DbaQuery
                    # Avoids modifying the collection
                    Invoke-DbaQuery -SqlInstance $server -Database $db.Name -Query "DROP CERTIFICATE $cert" -EnableException
                    Write-Message -Level Verbose -Message "Successfully removed certificate named $cert from the $db database on $server"
                    [pscustomobject]@{
                        ComputerName = $server.ComputerName
                        InstanceName = $server.ServiceName
                        SqlInstance  = $server.DomainInstanceName
                        Database     = $db.Name
                        Certificate  = $cert.Name
                        Status       = "Success"
                    }
                } catch {
                    Stop-Function -Message "Failed to drop certificate named $($cert.Name) from $($db.Name) on $($server.Name)." -Target $smocert -ErrorRecord $_ -Continue
                }
            }
        }
    }
}

tools\dbatools\functions\Remove-DbaDbMasterKey.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Remove-DbaDbMasterKey {
    <#
    .SYNOPSIS
        Deletes specified database master key

    .DESCRIPTION
        Deletes specified database master key

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Allows you to login to SQL Server using alternative credentials

    .PARAMETER Database
        The database where the master key will be removed.

    .PARAMETER ExcludeDatabase
        List of databases to exclude from clearing all master keys

    .PARAMETER All
        Purge the master keys from all databases on an instance

    .PARAMETER InputObject
        Enables pipeline input from Get-DbaDatabase

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .NOTES
        Tags: Certificate, Masterkey
        Author: Chrissy LeMaire (@cl), netnerds.net
        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Remove-DbaMasterKey

    .EXAMPLE
        PS C:\> Remove-DbaDbMasterKey -SqlInstance sql2017, sql2016 -Database pubs

        The master key in the pubs database on sql2017 and sql2016 will be removed if it exists.

    .EXAMPLE
        PS C:\> Remove-DbaDbMasterKey -SqlInstance sql2017 -Database db1 -Confirm:$false

        Suppresses all prompts to remove the master key in the 'db1' database and drops the key.

    .EXAMPLE
        PS C:\> Get-DbaDbMasterKey -SqlInstance sql2017 -Database db1 | Remove-DbaDbMasterKey -Confirm:$false

        Suppresses all prompts to remove the master key in the 'db1' database and drops the key.

    #>
    [CmdletBinding(DefaultParameterSetName = "Default", SupportsShouldProcess, ConfirmImpact = "High")]
    param (
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [System.Management.Automation.PSCredential]$SqlCredential,
        [string[]]$Database,
        [string[]]$ExcludeDatabase,
        [switch]$All,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.MasterKey[]]$InputObject,
        [switch]$EnableException
    )

    process {
        if ($SqlInstance) {
            if (-not $Database -and -not $ExcludeDatabase -and -not $All) {
                Stop-Function -Message "You must specify Database, ExcludeDatabase or All when using SqlInstance"
                return
            }
            # all does not need to be addressed in the code because it gets all the dbs if $databases is empty
            $databases = Get-DbaDatabase -SqlInstance $SqlInstance -SqlCredential $SqlCredential -Database $Database -ExcludeDatabase $ExcludeDatabase
            if ($databases) {
                foreach ($key in $databases.MasterKey) {
                    $InputObject += $key
                }
            }
        }

        foreach ($masterkey in $InputObject) {
            $server = $masterkey.Parent.Parent
            $db = $masterkey.Parent
            if ($Pscmdlet.ShouldProcess($server.Name, "Removing master key on $($db.Name)")) {
                # avoid enumeration issues
                try {
                    $masterkey.Parent.Query("DROP MASTER KEY")
                    [pscustomobject]@{
                        ComputerName = $server.ComputerName
                        InstanceName = $server.ServiceName
                        SqlInstance  = $server.DomainInstanceName
                        Database     = $db.Name
                        Status       = "Master key removed"
                    }
                } catch {
                    Stop-Function -Message "Failure" -ErrorRecord $_ -Continue
                }
            }
        }
    }
}

tools\dbatools\functions\Remove-DbaDbMirror.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Remove-DbaDbMirror {
    <#
    .SYNOPSIS
        Removes database mirrors.

    .DESCRIPTION
        Removes database mirrors. Does not set databases in recovery to recovered.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function
        to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The target database.

    .PARAMETER Partner
        The partner fqdn.

    .PARAMETER Witness
        The witness fqdn.

    .PARAMETER InputObject
        Allows piping from Get-DbaDatabase.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Mirror, HA
        Author: Chrissy LeMaire (@cl), netnerds.net
        dbatools PowerShell module (https://dbatools.io, [email protected])
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Set-DbaDbMirror

    .EXAMPLE
        PS C:\> Set-DbaDbMirror -SqlInstance localhost

        Returns all Endpoint(s) on the local default SQL Server instance

    .EXAMPLE
        PS C:\> Set-DbaDbMirror -SqlInstance localhost, sql2016

        Returns all Endpoint(s) for the local and sql2016 SQL Server instances

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'High')]
    param (
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$Database,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Database[]]$InputObject,
        [switch]$EnableException
    )
    process {
        if ((Test-Bound -ParameterName SqlInstance) -and (Test-Bound -Not -ParameterName Database)) {
            Stop-Function -Message "Database is required when SqlInstance is specified"
            return
        }
        foreach ($instance in $SqlInstance) {
            $InputObject += Get-DbaDatabase -SqlInstance $instance -SqlCredential $SqlCredential -Database $Database
        }

        foreach ($db in $InputObject) {
            if ($Pscmdlet.ShouldProcess($db.Parent.Name, "Turning off mirror for $db")) {
                # use t-sql cuz $db.Alter() doesnt always work against restoring dbs
                try {
                    try {
                        $db.ChangeMirroringState([Microsoft.SqlServer.Management.Smo.MirroringOption]::Off)
                        $db.Alter()
                    } catch {
                        try {
                            $db.Parent.Query("ALTER DATABASE $db SET PARTNER OFF")
                        } catch {
                            Stop-Function -Message "Failure on $($db.Parent) for $db" -ErrorRecord $_ -Continue
                        }
                    }
                    [pscustomobject]@{
                        ComputerName = $db.ComputerName
                        InstanceName = $db.InstanceName
                        SqlInstance  = $db.SqlInstance
                        Database     = $db.Name
                        Status       = "Removed"
                    }
                } catch {
                    Stop-Function -Message "Failure on $($db.Parent.Name)" -ErrorRecord $_
                }
            }
        }
    }
}

tools\dbatools\functions\Remove-DbaDbMirrorMonitor.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Remove-DbaDbMirrorMonitor {
    <#
    .SYNOPSIS
        Stops and deletes the mirroring monitor job for all the databases on the server instance.

    .DESCRIPTION
        Stops and deletes the mirroring monitor job for all the databases on the server instance.

        Basically executes sp_dbmmonitordropmonitoring.

    .PARAMETER SqlInstance
        The target SQL Server instance

    .PARAMETER SqlCredential
        Login to the target instance using alternate Windows or SQL Login Authentication. Accepts credential objects (Get-Credential).

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Mirror, HA, Monitor
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Remove-DbaDbMirrorMonitor

    .EXAMPLE
        PS C:\> Remove-DbaDbMirrorMonitor -SqlInstance sql2008, sql2012

        Stops and deletes the mirroring monitor job for all the databases on sql2008 and sql2012.

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'Low')]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }
            if ($Pscmdlet.ShouldProcess($instance, "Removing mirror monitoring")) {
                try {
                    $server.Query("msdb.dbo.sp_dbmmonitordropmonitoring")
                    [pscustomobject]@{
                        ComputerName  = $server.ComputerName
                        InstanceName  = $server.ServiceName
                        SqlInstance   = $server.DomainInstanceName
                        MonitorStatus = "Removed"
                    }
                } catch {
                    Stop-Function -Message "Failure" -ErrorRecord $_ -Continue
                }
            }
        }
    }
}

tools\dbatools\functions\Remove-DbaDbSnapshot.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Remove-DbaDbSnapshot {
    <#
    .SYNOPSIS
        Removes database snapshots

    .DESCRIPTION
        Removes (drops) database snapshots from the server

    .PARAMETER SqlInstance
        The target SQL Server instance or instances

    .PARAMETER SqlCredential
        Credential object used to connect to the SQL Server as a different user

    .PARAMETER Database
        Removes snapshots for only this specific base db

    .PARAMETER ExcludeDatabase
        Removes snapshots excluding this specific base dbs

    .PARAMETER Snapshot
        Restores databases from snapshot with this name only

    .PARAMETER AllSnapshots
        Specifies that you want to remove all snapshots from the server

    .PARAMETER Force
        Will forcibly kill all running queries that prevent the drop process.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run

    .PARAMETER Confirm
        Prompts for confirmation of every step.

    .PARAMETER InputObject
        Enables input from Get-DbaDbSnapshot

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Snapshot, Database
        Author: Simone Bizzotto (@niphold)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Remove-DbaDbSnapshot

    .EXAMPLE
        PS C:\> Remove-DbaDbSnapshot -SqlInstance sql2014 -Snapshot HR_snap_20161201, HR_snap_20161101

        Removes database snapshots named HR_snap_20161201 and HR_snap_20161101

    .EXAMPLE
        PS C:\> Remove-DbaDbSnapshot -SqlInstance sql2014 -Database HR, Accounting

        Removes all database snapshots having HR and Accounting as base dbs

    .EXAMPLE
        PS C:\> Get-DbaDbSnapshot -SqlInstance sql2014 -Database HR, Accounting | Remove-DbaDbSnapshot

        Removes all database snapshots having HR and Accounting as base dbs

    .EXAMPLE
        PS C:\> Remove-DbaDbSnapshot -SqlInstance sql2014 -Snapshot HR_snapshot, Accounting_snapshot

        Removes HR_snapshot and Accounting_snapshot

    .EXAMPLE
        PS C:\> Get-DbaDbSnapshot -SqlInstance sql2016 | Where SnapshotOf -like '*dumpsterfire*' | Remove-DbaDbSnapshot

        Removes all snapshots associated with databases that have dumpsterfire in the name

    .EXAMPLE
        PS C:\> Get-DbaDbSnapshot -SqlInstance sql2016 | Out-GridView -Passthru | Remove-DbaDbSnapshot

        Allows the selection of snapshots on sql2016 to remove

    .EXAMPLE
        PS C:\> Remove-DbaDbSnapshot -SqlInstance sql2014 -AllSnapshots

        Removes all database snapshots from sql2014

    .EXAMPLE
        PS C:\> Remove-DbaDbSnapshot -SqlInstance sql2014 -AllSnapshots -Confirm

        Removes all database snapshots from sql2014 and prompts for each database

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [Alias("Databases")]
        [string[]]$Database,
        [string[]]$ExcludeDatabase,
        [string[]]$Snapshot,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Database[]]$InputObject,
        [switch]$AllSnapshots,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {
        $defaultprops = 'ComputerName', 'InstanceName', 'SqlInstance', 'Database as Name', 'Status'
    }
    process {
        if (!$Snapshot -and !$Database -and !$AllSnapshots -and $null -eq $InputObject -and !$ExcludeDatabase) {
            Stop-Function -Message "You must pipe in a snapshot or specify -Snapshot, -Database, -ExcludeDatabase or -AllSnapshots"
            return
        }

        # if piped value either doesn't exist or is not the proper type
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $InputObject += Get-DbaDbSnapshot -SqlInstance $server -Database $Database -ExcludeDatabase $ExcludeDatabase -Snapshot $Snapshot
        }

        foreach ($db in $InputObject) {
            $server = $db.Parent

            if (-not $db.DatabaseSnapshotBaseName) {
                Stop-Function -Message "$db on $server is not a database snapshot" -Continue
            }

            if ($Force) {
                $db | Remove-DbaDatabase -Confirm:$false | Select-DefaultView -Property $defaultprops
            } else {
                try {
                    if ($Pscmdlet.ShouldProcess("$db on $server", "Drop snapshot")) {
                        $db.Drop()
                        $server.Refresh()

                        [pscustomobject]@{
                            ComputerName = $server.ComputerName
                            InstanceName = $server.ServiceName
                            SqlInstance  = $server.DomainInstanceName
                            Database     = $db.name
                            Status       = "Dropped"
                        } | Select-DefaultView -Property $defaultprops
                    }
                } catch {
                    Write-Message -Level Verbose -Message "Could not drop database $db on $server"

                    [pscustomobject]@{
                        ComputerName = $server.ComputerName
                        InstanceName = $server.ServiceName
                        SqlInstance  = $server.DomainInstanceName
                        Database     = $db.name
                        Status       = (Get-ErrorMessage -Record $_)
                    } | Select-DefaultView -Property $defaultprops
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias Remove-DbaDatabaseSnapshot
    }
}

tools\dbatools\functions\Remove-DbaDbUser.ps1

function Remove-DbaDbUser {
    <#
    .SYNOPSIS
        Drop database user

    .DESCRIPTION
        If user is the owner of a schema with the same name and if if the schema does not have any underlying objects the schema will be
        dropped.  If user owns more than one schema, the owner of the schemas that does not have the same name as the user, will be
        changed to 'dbo'. If schemas have underlying objects, you must specify the -Force parameter so the user can be dropped.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Credential object used to connect to the SQL Server as a different user.

    .PARAMETER Database
        Specifies the database(s) to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        Specifies the database(s) to exclude from processing. Options for this list are auto-populated from the server.

    .PARAMETER User
        Specifies the list of users to remove.

    .PARAMETER InputObject
        Support piping from Get-DbaDbUser.

    .PARAMETER Force
        If enabled this will force the change of the owner to 'dbo' for any schema which owner is the User.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Database, User, Login, Security
        Author: Doug Meyers (@dgmyrs)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Remove-DbaDbUser

    .EXAMPLE
        PS C:\> Remove-DbaDbUser -SqlInstance sqlserver2014 -User user1

        Drops user1 from all databases it exists in on server 'sqlserver2014'.

    .EXAMPLE
        PS C:\> Remove-DbaDbUser -SqlInstance sqlserver2014 -Database database1 -User user1

        Drops user1 from the database1 database on server 'sqlserver2014'.

    .EXAMPLE
        PS C:\> Remove-DbaDbUser -SqlInstance sqlserver2014 -ExcludeDatabase model -User user1

        Drops user1 from all databases it exists in on server 'sqlserver2014' except for the model database.

    .EXAMPLE
        PS C:\> Get-DbaDbUser sqlserver2014 | Where-Object Name -In "user1" | Remove-DbaDbUser

        Drops user1 from all databases it exists in on server 'sqlserver2014'.

    #>

    [CmdletBinding(DefaultParameterSetName = 'User', SupportsShouldProcess)]
    param (
        [parameter(Position = 1, Mandatory, ValueFromPipeline, ParameterSetName = 'User')]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,

        [parameter(ParameterSetName = 'User')]
        [Alias("Credential")]
        [PSCredential]
        $SqlCredential,

        [parameter(ParameterSetName = 'User')]
        [Alias("Databases")]
        [object[]]$Database,

        [parameter(ParameterSetName = 'User')]
        [object[]]$ExcludeDatabase,

        [parameter(Mandatory, ParameterSetName = 'User')]
        [object[]]$User,

        [parameter(Mandatory, ValueFromPipeline, ParameterSetName = 'Object')]
        [Microsoft.SqlServer.Management.Smo.User[]]$InputObject,

        [parameter(ParameterSetName = 'User')]
        [parameter(ParameterSetName = 'Object')]
        [switch]$Force,

        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        function Remove-DbUser {
            [CmdletBinding(SupportsShouldProcess)]
            param ([Microsoft.SqlServer.Management.Smo.User[]]$users)

            foreach ($user in $users) {
                $db = $user.Parent
                $server = $db.Parent
                $ownedObjects = $false
                $alterSchemas = @()
                $dropSchemas = @()
                Write-Message -Level Verbose -Message "Removing User $user from Database $db on target $server"

                if ($Pscmdlet.ShouldProcess($user, "Removing user from Database $db")) {
                    # Drop Schemas owned by the user before droping the user
                    $schemaUrns = $user.EnumOwnedObjects() | Where-Object Type -EQ Schema
                    if ($schemaUrns) {
                        Write-Message -Level Verbose -Message "User $user owns $($schemaUrns.Count) schema(s)."

                        # Need to gather up the schema changes so they can be done in a non-desctructive order
                        foreach ($schemaUrn in $schemaUrns) {
                            $schema = $server.GetSmoObject($schemaUrn)

                            # Drop any schema that is the same name as the user
                            if ($schema.Name -EQ $user.Name) {
                                # Check for owned objects early so we can exit before any changes are made
                                $ownedUrns = $schema.EnumOwnedObjects()
                                if (-Not $ownedUrns) {
                                    $dropSchemas += $schema
                                } else {
                                    Write-Message -Level Warning -Message "User owns objects in the database and will not be removed."
                                    foreach ($ownedUrn in $ownedUrns) {
                                        $obj = $server.GetSmoObject($ownedUrn)
                                        Write-Message -Level Warning -Message "User $user owns $($obj.GetType().Name) $obj"
                                    }
                                    $ownedObjects = $true
                                }
                            }

                            # Change the owner of any schema not the same name as the user
                            if ($schema.Name -NE $user.Name) {
                                # Check for owned objects early so we can exit before any changes are made
                                $ownedUrns = $schema.EnumOwnedObjects()
                                if (($ownedUrns -And $Force) -Or (-Not $ownedUrns)) {
                                    $alterSchemas += $schema
                                } else {
                                    Write-Message -Level Warning -Message "User $user owns the Schema $schema, which owns $($ownedUrns.Count) Object(s).  If you want to change the schemas' owner to [dbo] and drop the user anyway, use -Force parameter.  User $user will not be removed."
                                    $ownedObjects = $true
                                }
                            }
                        }
                    }

                    if (-Not $ownedObjects) {
                        try {
                            # Alter Schemas
                            foreach ($schema in $alterSchemas) {
                                Write-Message -Level Verbose -Message "Owner of Schema $schema will be changed to [dbo]."
                                if ($PSCmdlet.ShouldProcess($server, "Change the owner of Schema $schema to [dbo].")) {
                                    $schema.Owner = "dbo"
                                    $schema.Alter()
                                }
                            }

                            # Drop Schemas
                            foreach ($schema in $dropSchemas) {
                                if ($PSCmdlet.ShouldProcess($server, "Drop Schema $schema from Database $db.")) {
                                    $schema.Drop()
                                }
                            }

                            # Finally, Drop user
                            if ($PSCmdlet.ShouldProcess($server, "Drop User $user from Database $db.")) {
                                $user.Drop()
                            }

                            $status = "Dropped"

                        } catch {
                            Write-Error -Message "Could not drop $user from Database $db on target $server"
                            $status = "Not Dropped"
                        }

                        [pscustomobject]@{
                            ComputerName = $server.ComputerName
                            InstanceName = $server.ServiceName
                            SqlInstance  = $server.DomainInstanceName
                            Database     = $db.name
                            User         = $user
                            Status       = $status
                        }
                    }
                }
            }
        }
    }

    process {
        if ($InputObject) {
            Remove-DbUser $InputObject
        } else {
            foreach ($instance in $SqlInstance) {
                try {
                    $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
                } catch {
                    Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
                }

                $databases = $server.Databases | Where-Object IsAccessible

                if ($Database) {
                    $databases = $databases | Where-Object Name -In $Database
                }
                if ($ExcludeDatabase) {
                    $databases = $databases | Where-Object Name -NotIn $ExcludeDatabase
                }

                foreach ($db in $databases) {
                    Write-Message -Level Verbose -Message "Get users in Database $db on target $server"
                    $users = Get-DbaDbUser -SqlInstance $server -Database $db.Name
                    $users = $users | Where-Object Name -In $User
                    Remove-DbUser $users
                }
            }
        }
    }

}

tools\dbatools\functions\Remove-DbaEndpoint.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Remove-DbaEndpoint {
    <#
    .SYNOPSIS
        Removes endpoints from a SQL Server instance.

    .DESCRIPTION
        Removes endpoints from a SQL Server instance.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Endpoint
        Only remove specific endpoints.

    .PARAMETER AllEndpoints
        Remove all endpoints on an instance.

    .PARAMETER InputObject
        Enables piping from Get-Endpoint.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Endpoint
        Author: Chrissy LeMaire (@cl), netnerds.net
        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Remove-DbaEndpoint

    .EXAMPLE
        PS C:\> Remove-DbaEndpoint -SqlInstance sqlserver2012 -AllEndpoints

        Removes all endpoints on the sqlserver2014 instance. Prompts for confirmation.

    .EXAMPLE
        PS C:\> Remove-DbaEndpoint -SqlInstance sqlserver2012 -Endpoint endpoint1,endpoint2 -Confirm:$false

        Removes the endpoint1 and endpoint2 endpoints. Does not prompt for confirmation.

    .EXAMPLE
        PS C:\> Get-DbaEndpoint -SqlInstance sqlserver2012 -Endpoint endpoint1 | Remove-DbaEndpoint

        Removes the endpoints returned from the Get-DbaEndpoint function. Prompts for confirmation.
    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'High')]
    param (
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$EndPoint,
        [switch]$AllEndpoints,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Endpoint[]]$InputObject,
        [switch]$EnableException
    )
    process {
        if ((Test-Bound -ParameterName SqlInstance) -and (Test-Bound -Not -ParameterName Endpoint, AllEndpoints)) {
            Stop-Function -Message "You must specify AllEndpoints or Endpoint when using the SqlInstance parameter."
            return
        }
        foreach ($instance in $SqlInstance) {
            $InputObject += Get-DbaEndpoint -SqlInstance $instance -SqlCredential $SqlCredential -EndPoint $Endpoint
        }

        foreach ($ep in $InputObject) {
            if ($Pscmdlet.ShouldProcess($ep.Parent.name, "Removing endpoint $ep")) {
                try {
                    # avoid enumeration issues
                    $ep.Parent.Query("DROP ENDPOINT $ep")
                    [pscustomobject]@{
                        ComputerName = $ep.ComputerName
                        InstanceName = $ep.InstanceName
                        SqlInstance  = $ep.SqlInstance
                        Endpoint     = $ep.Name
                        Status       = "Removed"
                    }
                } catch {
                    Stop-Function -Message "Failure" -ErrorRecord $_ -Continue
                }
            }
        }
    }
}

tools\dbatools\functions\Remove-DbaLogin.ps1

function Remove-DbaLogin {
    <#
    .SYNOPSIS
        Drops a Login

    .DESCRIPTION
        Tries a bunch of different ways to remove a Login or two or more.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Allows you to login to servers using alternative credentials.

    .PARAMETER Login
        The Login(s) to process - this list is auto-populated from the server. If unspecified, all Logins will be processed.

    .PARAMETER InputObject
        A collection of Logins (such as returned by Get-DbaLogin), to be removed.

    .PARAMETER Force
        Kills any sessions associated with the login prior to drop

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Delete, Login
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Remove-DbaLogin

    .EXAMPLE
        PS C:\> Remove-DbaLogin -SqlInstance sql2016 -Login mylogin

        Prompts then removes the Login mylogin on SQL Server sql2016

    .EXAMPLE
        PS C:\> Remove-DbaLogin -SqlInstance sql2016 -Login mylogin, yourlogin

        Prompts then removes the Logins mylogin and yourlogin on SQL Server sql2016

    .EXAMPLE
        PS C:\> Remove-DbaLogin -SqlInstance sql2016 -Login mylogin -Confirm:$false

        Does not prompt and swiftly removes mylogin on SQL Server sql2016

    .EXAMPLE
        PS C:\> Get-DbaLogin -SqlInstance server\instance -Login yourlogin | Remove-DbaLogin

        Removes mylogin on SQL Server server\instance

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'High', DefaultParameterSetName = "Default")]
    param (
        [parameter(Mandatory, ParameterSetName = "instance")]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [parameter(Mandatory, ParameterSetName = "instance")]
        [string[]]$Login,
        [Parameter(ValueFromPipeline, Mandatory, ParameterSetName = "Logins")]
        [Microsoft.SqlServer.Management.Smo.Login[]]$InputObject,
        [switch]$Force,
        [switch]$EnableException
    )

    process {

        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }
            $InputObject += $server.Logins | Where-Object { $_.Name -in $Login }
        }

        foreach ($currentlogin in $InputObject) {
            try {
                $server = $currentlogin.Parent
                if ($Pscmdlet.ShouldProcess("$currentlogin on $server", "KillLogin")) {
                    if ($force) {
                        $null = Stop-DbaProcess -SqlInstance $server -Login $currentlogin.name
                    }

                    $currentlogin.Drop()

                    [pscustomobject]@{
                        ComputerName = $server.ComputerName
                        InstanceName = $server.ServiceName
                        SqlInstance  = $server.DomainInstanceName
                        Login        = $currentlogin.name
                        Status       = "Dropped"
                    }
                }
            } catch {
                [pscustomobject]@{
                    ComputerName = $server.ComputerName
                    InstanceName = $server.ServiceName
                    SqlInstance  = $server.DomainInstanceName
                    Login        = $currentlogin.name
                    Status       = $_
                }
                Stop-Function -Message "Could not drop Login $currentlogin on $server" -ErrorRecord $_ -Target $currentlogin -Continue
            }
        }
    }
}

tools\dbatools\functions\Remove-DbaNetworkCertificate.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#

function Remove-DbaNetworkCertificate {
    <#
    .SYNOPSIS
        Removes the network certificate for SQL Server instance

    .DESCRIPTION
        Removes the network certificate for SQL Server instance. This setting is found in Configuration Manager.

    .PARAMETER SqlInstance
       The target SQL Server instance or instances. Defaults to localhost. If target is a cluster, you must also specify InstanceClusterName (see below)

    .PARAMETER Credential
        Allows you to login to the computer (not sql instance) using alternative credentials.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .NOTES
        Tags: Certificate
        Author: Chrissy LeMaire (@cl), netnerds.net
        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Remove-DbaNetworkCertificate

    .EXAMPLE
        PS C:\> Remove-DbaNetworkCertificate

        Removes the Network Certificate for the default instance (MSSQLSERVER) on localhost

    .EXAMPLE
        PS C:\> Remove-DbaNetworkCertificate -SqlInstance sql1\SQL2008R2SP2

        Removes the Network Certificate for the SQL2008R2SP2 instance on sql1

    .EXAMPLE
        PS C:\> Remove-DbaNetworkCertificate -SqlInstance localhost\SQL2008R2SP2 -WhatIf

        Shows what would happen if the command were run

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "Low", DefaultParameterSetName = 'Default')]
    param (
        [Parameter(ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "ComputerName")]
        [DbaInstanceParameter[]]$SqlInstance = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [switch]$EnableException
    )
    process {
        # Registry access
        
        
        foreach ($instance in $sqlinstance) {
            Write-Message -Level VeryVerbose -Message "Processing $instance" -Target $instance
            $null = Test-ElevationRequirement -ComputerName $instance -Continue

            Write-Message -Level Verbose -Message "Resolving hostname"
            $resolved = $null
            $resolved = Resolve-DbaNetworkName -ComputerName $instance -Turbo

            if ($null -eq $resolved) {
                Stop-Function -Message "Can't resolve $instance" -Target $instance -Continue -Category InvalidArgument
            }

            try {
                $sqlwmi = Invoke-ManagedComputerCommand -ComputerName $resolved.FQDN -ScriptBlock { $wmi.Services } -Credential $Credential -ErrorAction Stop | Where-Object DisplayName -eq "SQL Server ($($instance.InstanceName))"
            } catch {
                Stop-Function -Message "Failed to access $instance" -Target $instance -Continue -ErrorRecord $_
            }

            $regroot = ($sqlwmi.AdvancedProperties | Where-Object Name -eq REGROOT).Value
            $vsname = ($sqlwmi.AdvancedProperties | Where-Object Name -eq VSNAME).Value
            $instancename = $sqlwmi.DisplayName.Replace('SQL Server (', '').Replace(')', '') # Don't clown, I don't know regex :(
            $serviceaccount = $sqlwmi.ServiceAccount

            if ([System.String]::IsNullOrEmpty($regroot)) {
                $regroot = $sqlwmi.AdvancedProperties | Where-Object { $_ -match 'REGROOT' }
                $vsname = $sqlwmi.AdvancedProperties | Where-Object { $_ -match 'VSNAME' }

                if (![System.String]::IsNullOrEmpty($regroot)) {
                    $regroot = ($regroot -Split 'Value\=')[1]
                    $vsname = ($vsname -Split 'Value\=')[1]
                } else {
                    Stop-Function -Message "Can't find instance $vsname on $instance" -Continue -Category ObjectNotFound -Target $instance
                }
            }

            if ([System.String]::IsNullOrEmpty($vsname)) { $vsname = $instance }

            Write-Message -Level Output -Message "Regroot: $regroot" -Target $instance
            Write-Message -Level Output -Message "ServiceAcct: $serviceaccount" -Target $instance
            Write-Message -Level Output -Message "InstanceName: $instancename" -Target $instance
            Write-Message -Level Output -Message "VSNAME: $vsname" -Target $instance

            $scriptblock = {
                $regroot = $args[0]
                $serviceaccount = $args[1]
                $instancename = $args[2]
                $vsname = $args[3]

                $regpath = "Registry::HKEY_LOCAL_MACHINE\$($regroot)\MSSQLServer\SuperSocketNetLib"
                $cert = (Get-ItemProperty -Path $regpath -Name Certificate).Certificate
                Set-ItemProperty -Path $regpath -Name Certificate -Value $null

                [pscustomobject]@{
                    ComputerName      = $env:COMPUTERNAME
                    InstanceName      = $instancename
                    SqlInstance       = $vsname
                    ServiceAccount    = $serviceaccount
                    RemovedThumbprint = $cert.Thumbprint
                }
            }

            if ($PScmdlet.ShouldProcess("local", "Connecting to $ComputerName to remove the cert")) {
                try {
                    Invoke-Command2 -ComputerName $resolved.fqdn -Credential $Credential -ArgumentList $regroot, $serviceaccount, $instancename, $vsname -ScriptBlock $scriptblock -ErrorAction Stop
                } catch {
                    Stop-Function -Message "Failed to connect to $($resolved.fqdn) using PowerShell remoting!" -ErrorRecord $_ -Target $instance -Continue
                }
            }
        }
    }
}

tools\dbatools\functions\Remove-DbaOrphanUser.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Remove-DbaOrphanUser {
    <#
    .SYNOPSIS
        Drop orphan users with no existing login to map

    .DESCRIPTION
        An orphan user is defined by a user that does not have their matching login. (Login property = "").

        If user is the owner of the schema with the same name and if if the schema does not have any underlying objects the schema will be dropped.

        If user owns more than one schema, the owner of the schemas that does not have the same name as the user, will be changed to 'dbo'. If schemas have underlying objects, you must specify the -Force parameter so the user can be dropped.

        If exists a login to map the drop will not be performed unless you specify the -Force parameter (only when calling from Repair-DbaOrphanUser.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        Specifies the database(s) to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        Specifies the database(s) to exclude from processing. Options for this list are auto-populated from the server

    .PARAMETER User
        Specifies the list of users to remove.

    .PARAMETER Force
        If this switch is enabled:
        If exists any schema which owner is the User, this will force the change of the owner to 'dbo'.
        If exists a login to map the drop will not be performed unless you specify this parameter.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Orphan, Database, Security, Login
        Author: Claudio Silva (@ClaudioESSilva) | Simone Bizzotto (@niphlod)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Remove-DbaOrphanUser

    .EXAMPLE
        PS C:\> Remove-DbaOrphanUser -SqlInstance sql2005

        Finds and drops all orphan users without matching Logins in all databases present on server 'sql2005'.

    .EXAMPLE
        PS C:\> Remove-DbaOrphanUser -SqlInstance sqlserver2014a -SqlCredential $cred

        Finds and drops all orphan users without matching Logins in all databases present on server 'sqlserver2014a'. SQL Server authentication will be used in connecting to the server.

    .EXAMPLE
        PS C:\> Remove-DbaOrphanUser -SqlInstance sqlserver2014a -Database db1, db2 -Force

        Finds and drops orphan users even if they have a matching Login on both db1 and db2 databases.

    .EXAMPLE
        PS C:\> Remove-DbaOrphanUser -SqlInstance sqlserver2014a -ExcludeDatabase db1, db2 -Force

        Finds and drops orphan users even if they have a matching Login from all databases except db1 and db2.

    .EXAMPLE
        PS C:\> Remove-DbaOrphanUser -SqlInstance sqlserver2014a -User OrphanUser

        Removes user OrphanUser from all databases only if there is no matching login.

    .EXAMPLE
        PS C:\> Remove-DbaOrphanUser -SqlInstance sqlserver2014a -User OrphanUser -Force

        Removes user OrphanUser from all databases even if they have a matching Login. Any schema that the user owns will change ownership to dbo.

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]
        $SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [parameter(ValueFromPipeline)]
        [object[]]$User,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {

        foreach ($Instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $Instance -SqlCredential $SqlCredential
            } catch {
                Write-Message -Level Warning -Message "Can't connect to $Instance or access denied. Skipping."
                continue
            }

            $DatabaseCollection = $server.Databases | Where-Object IsAccessible

            if ($Database) {
                $DatabaseCollection = $DatabaseCollection | Where-Object Name -In $Database
            }
            if ($ExcludeDatabase) {
                $DatabaseCollection = $DatabaseCollection | Where-Object Name -NotIn $ExcludeDatabase
            }

            $CallStack = Get-PSCallStack | Select-Object -Property *
            if ($CallStack.Count -eq 1) {
                $StackSource = $CallStack[0].Command
            } else {
                #-2 because index base is 0 and we want the one before the last (the last is the actual command)
                $StackSource = $CallStack[($CallStack.Count - 2)].Command
            }

            if ($DatabaseCollection) {
                foreach ($db in $DatabaseCollection) {
                    try {
                        #if SQL 2012 or higher only validate databases with ContainmentType = NONE
                        if ($server.versionMajor -gt 10) {
                            if ($db.ContainmentType -ne [Microsoft.SqlServer.Management.Smo.ContainmentType]::None) {
                                Write-Message -Level Warning -Message "Database '$db' is a contained database. Contained databases can't have orphaned users. Skipping validation."
                                Continue
                            }
                        }

                        if ($StackSource -eq "Repair-DbaOrphanUser") {
                            Write-Message -Level Verbose -Message "Call origin: Repair-DbaOrphanUser."
                            #Will use collection from parameter ($User)
                        } else {
                            Write-Message -Level Verbose -Message "Validating users on database $db."

                            if ($User.Count -eq 0) {
                                #the third validation will remove from list sql users without login  or mapped to certificate. The rule here is Sid with length higher than 16
                                $User = $db.Users | Where-Object { $_.Login -eq "" -and ($_.ID -gt 4) -and (($_.Sid.Length -gt 16 -and $_.LoginType -in @([Microsoft.SqlServer.Management.Smo.LoginType]::SqlLogin, [Microsoft.SqlServer.Management.Smo.LoginType]::Certificate)) -eq $false) }
                            } else {
                                #the fourth validation will remove from list sql users without login or mapped to certificate. The rule here is Sid with length higher than 16
                                $User = $db.Users | Where-Object { $_.Login -eq "" -and ($_.ID -gt 4) -and ($User -contains $_.Name) -and (($_.Sid.Length -gt 16 -and $_.LoginType -in @([Microsoft.SqlServer.Management.Smo.LoginType]::SqlLogin, [Microsoft.SqlServer.Management.Smo.LoginType]::Certificate)) -eq $false) }
                            }
                        }

                        if ($User.Count -gt 0) {
                            Write-Message -Level Verbose -Message "Orphan users found."
                            foreach ($dbuser in $User) {
                                $SkipUser = $false

                                $ExistLogin = $null

                                if ($StackSource -ne "Repair-DbaOrphanUser") {
                                    #Need to validate Existing Login because the call does not came from Repair-DbaOrphanUser
                                    $ExistLogin = $server.logins | Where-Object {
                                        $_.Isdisabled -eq $False -and
                                        $_.IsSystemObject -eq $False -and
                                        $_.IsLocked -eq $False -and
                                        $_.Name -eq $dbuser.Name
                                    }
                                }

                                #Schemas only appears on SQL Server 2005 (v9.0)
                                if ($server.versionMajor -gt 8) {

                                    #reset variables
                                    $AlterSchemaOwner = ""
                                    $DropSchema = ""

                                    #Validate if user owns any schema
                                    $Schemas = @()
                                    $Schemas = $db.Schemas | Where-Object Owner -eq $dbuser.Name

                                    if (@($Schemas).Count -gt 0) {
                                        Write-Message -Level Verbose -Message "User $dbuser owns one or more schemas."

                                        foreach ($sch in $Schemas) {
                                            <#
                                                On sql server 2008 or lower the EnumObjects method does not accept empty parameter.
                                                0x1FFFFFFF is the way we can say we want everything known by those versions

                                                When it is a higher version we can use empty to get all
                                            #>
                                            if ($server.versionMajor -lt 11) {
                                                $NumberObjects = ($db.EnumObjects(0x1FFFFFFF) | Where-Object { $_.Schema -eq $sch.Name } | Measure-Object).Count
                                            } else {
                                                $NumberObjects = ($db.EnumObjects() | Where-Object { $_.Schema -eq $sch.Name } | Measure-Object).Count
                                            }

                                            if ($NumberObjects -gt 0) {
                                                if ($Force) {
                                                    Write-Message -Level Verbose -Message "Parameter -Force was used! The schema '$($sch.Name)' have $NumberObjects underlying objects. We will change schema owner to 'dbo' and drop the user."

                                                    if ($Pscmdlet.ShouldProcess($db.Name, "Changing schema '$($sch.Name)' owner to 'dbo'. -Force used.")) {
                                                        $AlterSchemaOwner += "ALTER AUTHORIZATION ON SCHEMA::[$($sch.Name)] TO [dbo]`r`n"

                                                        [pscustomobject]@{
                                                            ComputerName      = $server.ComputerName
                                                            InstanceName      = $server.ServiceName
                                                            SqlInstance       = $server.DomainInstanceName
                                                            DatabaseName      = $db.Name
                                                            SchemaName        = $sch.Name
                                                            Action            = "ALTER OWNER"
                                                            SchemaOwnerBefore = $sch.Owner
                                                            SchemaOwnerAfter  = "dbo"
                                                        }
                                                    }
                                                } else {
                                                    Write-Message -Level Warning -Message "Schema '$($sch.Name)' owned by user $($dbuser.Name) have $NumberObjects underlying objects. If you want to change the schemas' owner to 'dbo' and drop the user anyway, use -Force parameter. Skipping user '$dbuser'."
                                                    $SkipUser = $true
                                                    break
                                                }
                                            } else {
                                                if ($sch.Name -eq $dbuser.Name) {
                                                    Write-Message -Level Verbose -Message "The schema '$($sch.Name)' have the same name as user $dbuser. Schema will be dropped."

                                                    if ($Pscmdlet.ShouldProcess($db.Name, "Dropping schema '$($sch.Name)'.")) {
                                                        $DropSchema += "DROP SCHEMA [$($sch.Name)]"

                                                        [pscustomobject]@{
                                                            ComputerName      = $server.ComputerName
                                                            InstanceName      = $server.ServiceName
                                                            SqlInstance       = $server.DomainInstanceName
                                                            DatabaseName      = $db.Name
                                                            SchemaName        = $sch.Name
                                                            Action            = "DROP"
                                                            SchemaOwnerBefore = $sch.Owner
                                                            SchemaOwnerAfter  = "N/A"
                                                        }
                                                    }
                                                } else {
                                                    Write-Message -Level Warning -Message "Schema '$($sch.Name)' does not have any underlying object. Ownership will be changed to 'dbo' so the user can be dropped. Remember to re-check permissions on this schema!"

                                                    if ($Pscmdlet.ShouldProcess($db.Name, "Changing schema '$($sch.Name)' owner to 'dbo'.")) {
                                                        $AlterSchemaOwner += "ALTER AUTHORIZATION ON SCHEMA::[$($sch.Name)] TO [dbo]`r`n"

                                                        [pscustomobject]@{
                                                            ComputerName      = $server.ComputerName
                                                            InstanceName      = $server.ServiceName
                                                            SqlInstance       = $server.DomainInstanceName
                                                            DatabaseName      = $db.Name
                                                            SchemaName        = $sch.Name
                                                            Action            = "ALTER OWNER"
                                                            SchemaOwnerBefore = $sch.Owner
                                                            SchemaOwnerAfter  = "dbo"
                                                        }
                                                    }
                                                }
                                            }
                                        }

                                    } else {
                                        Write-Message -Level Verbose -Message "User $dbuser does not own any schema. Will be dropped."
                                    }

                                    $query = "$AlterSchemaOwner `r`n$DropSchema `r`nDROP USER " + $dbuser

                                    Write-Message -Level Debug -Message $query
                                } else {
                                    $query = "EXEC master.dbo.sp_droplogin @loginame = N'$($dbuser.name)'"
                                }

                                if ($ExistLogin) {
                                    if (-not $SkipUser) {
                                        if ($Force) {
                                            if ($Pscmdlet.ShouldProcess($db.Name, "Dropping user $dbuser using -Force")) {
                                                $server.Databases[$db.Name].ExecuteNonQuery($query) | Out-Null
                                                Write-Message -Level Verbose -Message "User $dbuser was dropped from $($db.Name). -Force parameter was used!"
                                            }
                                        } else {
                                            Write-Message -Level Warning -Message "Orphan user $($dbuser.Name) has a matching login. The user will not be dropped. If you want to drop anyway, use -Force parameter."
                                            Continue
                                        }
                                    }
                                } else {
                                    if (-not $SkipUser) {
                                        if ($Pscmdlet.ShouldProcess($db.Name, "Dropping user $dbuser")) {
                                            $server.Databases[$db.Name].ExecuteNonQuery($query) | Out-Null
                                            Write-Message -Level Verbose -Message "User $dbuser was dropped from $($db.Name)."
                                        }
                                    }
                                }
                            }
                        } else {
                            Write-Message -Level Verbose -Message "No orphan users found on database $db."
                        }
                        #reset collection
                        $User = $null
                    } catch {
                        Stop-Function -Message "Failure" -ErrorRecord $_ -Target $db -Continue
                    }
                }
            } else {
                Write-Message -Level Verbose -Message "There are no databases to analyse."
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Remove-SqlOrphanUser
    }
}

tools\dbatools\functions\Remove-DbaPfDataCollectorCounter.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Remove-DbaPfDataCollectorCounter {
    <#
    .SYNOPSIS
        Removes a Performance Data Collector Counter.

    .DESCRIPTION
        Removes a Performance Data Collector Counter.

    .PARAMETER ComputerName
        The target computer. Defaults to localhost.

    .PARAMETER Credential
        Allows you to login to the target computer using alternative credentials. To use:

        $cred = Get-Credential, then pass $cred object to the -Credential parameter.

    .PARAMETER CollectorSet
        The name of the Collector Set to search.

    .PARAMETER Collector
        The name of the Collector to remove.

    .PARAMETER Counter
        The name of the Counter - in the form of '\Processor(_Total)\% Processor Time'.

    .PARAMETER InputObject
        Accepts the object output by Get-DbaPfDataCollectorSet via the pipeline.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: PerfMon
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Remove-DbaPfDataCollectorCounter

    .EXAMPLE
        PS C:\> Remove-DbaPfDataCollectorCounter -ComputerName sql2017 -CollectorSet 'System Correlation' -Collector DataCollector01  -Counter '\LogicalDisk(*)\Avg. Disk Queue Length'

        Prompts for confirmation then removes the '\LogicalDisk(*)\Avg. Disk Queue Length' counter within the DataCollector01 collector within the System Correlation collector set on sql2017.

    .EXAMPLE
        PS C:\> Get-DbaPfDataCollectorCounter | Out-GridView -PassThru | Remove-DbaPfDataCollectorCounter -Confirm:$false

        Allows you to select which counters you'd like on localhost and does not prompt for confirmation.

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "High")]
    param (
        [DbaInstance[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [Alias("DataCollectorSet")]
        [string[]]$CollectorSet,
        [Alias("DataCollector")]
        [string[]]$Collector,
        [parameter(Mandatory, ValueFromPipelineByPropertyName)]
        [Alias("Name")]
        [object[]]$Counter,
        [parameter(ValueFromPipeline)]
        [object[]]$InputObject,
        [switch]$EnableException
    )
    begin {
        $setscript = {
            $setname = $args[0]; $removexml = $args[1]
            $CollectorSet = New-Object -ComObject Pla.DataCollectorSet
            $CollectorSet.SetXml($removexml)
            $CollectorSet.Commit($setname, $null, 0x0003) #add or modify.
            $CollectorSet.Query($setname, $Null)
        }
    }
    process {
        
        
        if ($InputObject.Credential -and (Test-Bound -ParameterName Credential -Not)) {
            $Credential = $InputObject.Credential
        }

        if (-not $InputObject -or ($InputObject -and (Test-Bound -ParameterName ComputerName))) {
            foreach ($computer in $ComputerName) {
                $InputObject += Get-DbaPfDataCollectorCounter -ComputerName $computer -Credential $Credential -CollectorSet $CollectorSet -Collector $Collector -Counter $Counter
            }
        }

        if ($InputObject) {
            if (-not $InputObject.CounterObject) {
                Stop-Function -Message "InputObject is not of the right type. Please use Get-DbaPfDataCollectorCounter."
                return
            }
        }

        foreach ($object in $InputObject) {
            $computer = $InputObject.ComputerName
            $null = Test-ElevationRequirement -ComputerName $computer -Continue
            $setname = $InputObject.DataCollectorSet
            $collectorname = $InputObject.DataCollector

            $xml = [xml]($InputObject.DataCollectorSetXml)

            foreach ($countername in $counter) {
                $node = $xml.SelectSingleNode("//Name[.='$collectorname']").SelectSingleNode("//Counter[.='$countername']")
                $null = $node.ParentNode.RemoveChild($node)
                $node = $xml.SelectSingleNode("//Name[.='$collectorname']").SelectSingleNode("//CounterDisplayName[.='$countername']")
                $null = $node.ParentNode.RemoveChild($node)
            }

            $plainxml = $xml.OuterXml

            if ($Pscmdlet.ShouldProcess("$computer", "Remove $countername from $collectorname with the $setname collection set")) {
                try {
                    $results = Invoke-Command2 -ComputerName $computer -Credential $Credential -ScriptBlock $setscript -ArgumentList $setname, $plainxml -ErrorAction Stop -Raw
                    Write-Message -Level Verbose -Message " $results"
                    [pscustomobject]@{
                        ComputerName     = $computer
                        DataCollectorSet = $setname
                        DataCollector    = $collectorname
                        Name             = $counterName
                        Status           = "Removed"
                    }
                } catch {
                    Stop-Function -Message "Failure importing $Countername to $computer." -ErrorRecord $_ -Target $computer -Continue
                }
            }
        }
    }
}

tools\dbatools\functions\Remove-DbaPfDataCollectorSet.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Remove-DbaPfDataCollectorSet {
    <#
    .SYNOPSIS
        Removes a Performance Monitor Data Collector Set

    .DESCRIPTION
        Removes a Performance Monitor Data Collector Set. When removing data collector sets from the local instance, Run As Admin is required.

    .PARAMETER ComputerName
        The target computer. Defaults to localhost.

    .PARAMETER Credential
        Allows you to login to the target computer using alternative credentials. To use:

        $cred = Get-Credential, then pass $cred object to the -Credential parameter.

    .PARAMETER CollectorSet
        The name of the Collector Set to remove.

    .PARAMETER InputObject
        Accepts the object output by Get-DbaPfDataCollectorSet via the pipeline.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: PerfMon
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Remove-DbaPfDataCollectorSet

    .EXAMPLE
        PS C:\> Remove-DbaPfDataCollectorSet

        Prompts for confirmation then removes all ready Collectors on localhost.

    .EXAMPLE
        PS C:\> Remove-DbaPfDataCollectorSet -ComputerName sql2017 -Confirm:$false

        Attempts to remove all ready Collectors on localhost and does not prompt to confirm.

    .EXAMPLE
        PS C:\> Remove-DbaPfDataCollectorSet -ComputerName sql2017, sql2016 -Credential ad\sqldba -CollectorSet 'System Correlation'

        Prompts for confirmation then removes the 'System Correlation' Collector on sql2017 and sql2016 using alternative credentials.

    .EXAMPLE
        PS C:\> Get-DbaPfDataCollectorSet -CollectorSet 'System Correlation' | Remove-DbaPfDataCollectorSet

        Removes the 'System Correlation' Collector.

    .EXAMPLE
        PS C:\> Get-DbaPfDataCollectorSet -CollectorSet 'System Correlation' | Stop-DbaPfDataCollectorSet | Remove-DbaPfDataCollectorSet

        Stops and removes the 'System Correlation' Collector.

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "High")]
    param (
        [DbaInstance[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [Alias("DataCollectorSet")]
        [string[]]$CollectorSet,
        [parameter(ValueFromPipeline)]
        [object[]]$InputObject,
        [switch]$EnableException
    )
    begin {
        $setscript = {
            $setname = $args
            $collectorset = New-Object -ComObject Pla.DataCollectorSet
            $collectorset.Query($setname, $null)
            if ($collectorset.name -eq $setname) {
                $null = $collectorset.Delete()
            } else {
                <# DO NOT use Write-Message as this is inside of a script block #>
                Write-Warning "Data Collector Set $setname does not exist on $env:COMPUTERNAME."
            }
        }
    }
    process {
        
        
        if (-not $InputObject -or ($InputObject -and (Test-Bound -ParameterName ComputerName))) {
            foreach ($computer in $ComputerName) {
                $InputObject += Get-DbaPfDataCollectorSet -ComputerName $computer -Credential $Credential -CollectorSet $CollectorSet
            }
        }

        if ($InputObject) {
            if (-not $InputObject.DataCollectorSetObject) {
                Stop-Function -Message "InputObject is not of the right type. Please use Get-DbaPfDataCollectorSet."
                return
            }
        }

        # Check to see if its running first
        foreach ($set in $InputObject) {
            $setname = $set.Name
            $computer = $set.ComputerName
            $status = $set.State

            $null = Test-ElevationRequirement -ComputerName $computer -Continue

            Write-Message -Level Verbose -Message "$setname on $ComputerName is $status."

            if ($status -eq "Running") {
                Stop-Function -Message "$setname on $computer is running. Use Stop-DbaPfDataCollectorSet to stop first." -Continue
            }

            if ($Pscmdlet.ShouldProcess("$computer", "Removing collector set $setname")) {
                try {
                    Invoke-Command2 -ComputerName $computer -Credential $Credential -ScriptBlock $setscript -ArgumentList $setname -ErrorAction Stop
                    [pscustomobject]@{
                        ComputerName = $computer
                        Name         = $setname
                        Status       = "Removed"
                    }
                } catch {
                    Stop-Function -Message "Failure Removing $setname on $computer." -ErrorRecord $_ -Target $computer -Continue
                }
            }
        }
    }
}

tools\dbatools\functions\Remove-DbaSpn.ps1

#ValidationTags#FlowControl,Pipeline#
function Remove-DbaSpn {
    <#
    .SYNOPSIS
        Removes an SPN for a given service account in active directory and also removes delegation to the same SPN, if found

    .DESCRIPTION
        This function will connect to Active Directory and search for an account. If the account is found, it will attempt to remove the specified SPN. Once the SPN is removed, the function will also remove delegation to that service.

        In order to run this function, the credential you provide must have write access to Active Directory.

    .PARAMETER SPN
        The SPN you want to remove

    .PARAMETER ServiceAccount
        The account you want the SPN remove from

    .PARAMETER Credential
        The credential you want to use to connect to Active Directory to make the changes

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER Confirm
        Turns confirmations before changes on or off

    .PARAMETER WhatIf
        Shows what would happen if the command was executed

    .NOTES
        Tags: SPN
        Author: Drew Furgiuele (@pittfurg), http://www.port1433.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Remove-DbaSpn

    .EXAMPLE
        PS C:\> Remove-DbaSpn -SPN MSSQLSvc\SQLSERVERA.domain.something -ServiceAccount domain\account

        Connects to Active Directory and removes a provided SPN from the given account (and also the relative delegation)

    .EXAMPLE
        PS C:\> Remove-DbaSpn -SPN MSSQLSvc\SQLSERVERA.domain.something -ServiceAccount domain\account -EnableException

        Connects to Active Directory and removes a provided SPN from the given account, suppressing all error messages and throw exceptions that can be caught instead

    .EXAMPLE
        PS C:\> Remove-DbaSpn -SPN MSSQLSvc\SQLSERVERA.domain.something -ServiceAccount domain\account -Credential ad\sqldba

        Connects to Active Directory and removes a provided SPN to the given account. Uses alternative account to connect to AD.

    .EXAMPLE
        PS C:\> Test-DbaSpn -ComputerName sql2005 | Where { $_.isSet -eq $true } | Remove-DbaSpn -WhatIf

        Shows what would happen trying to remove all set SPNs for sql2005 and the relative delegations

    .EXAMPLE
        PS C:\> Test-DbaSpn -ComputerName sql2005 | Where { $_.isSet -eq $true } | Remove-DbaSpn

        Removes all set SPNs for sql2005 and the relative delegations

    #>
    [cmdletbinding(SupportsShouldProcess, DefaultParameterSetName = "Default")]
    param (
        [Parameter(Mandatory, ValueFromPipelineByPropertyName)]
        [Alias("RequiredSPN")]
        [string]$SPN,
        [Parameter(Mandatory, ValueFromPipelineByPropertyName)]
        [Alias("InstanceServiceAccount", "AccountName")]
        [string]$ServiceAccount,
        [Parameter(ValueFromPipelineByPropertyName)]
        [PSCredential]$Credential,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        Write-Message -Message "Looking for account $ServiceAccount..." -Level Verbose
        $searchfor = 'User'
        if ($ServiceAccount.EndsWith('$')) {
            $searchfor = 'Computer'
        }
        try {
            $Result = Get-DbaADObject -ADObject $ServiceAccount -Type $searchfor -Credential $Credential -EnableException
        } catch {
            Stop-Function -Message "AD lookup failure. This may be because the domain cannot be resolved for the SQL Server service account ($ServiceAccount). $($_.Exception.Message)" -EnableException $EnableException -InnerErrorRecord $_ -Target $ServiceAccount
        }
        if ($Result.Count -gt 0) {
            try {
                $adentry = $Result.GetUnderlyingObject()
            } catch {
                Stop-Function -Message "The SQL Service account ($ServiceAccount) has been found, but you don't have enough permission to inspect its properties $($_.Exception.Message)" -EnableException $EnableException -InnerErrorRecord $_ -Target $ServiceAccount
            }
        } else {
            Stop-Function -Message "The SQL Service account ($ServiceAccount) has not been found" -EnableException $EnableException -Target $ServiceAccount
        }

        # Cool! Remove an SPN
        $delegate = $true
        $spnadobject = $adentry.Properties['servicePrincipalName']

        if ($spnadobject -notcontains $spn) {
            Write-Message -Level Warning -Message "SPN $SPN not found"
            $status = "SPN not found"
            $set = $false
        }

        if ($PSCmdlet.ShouldProcess("$spn", "Removing SPN for service account")) {
            try {
                if ($spnadobject -contains $spn) {
                    $null = $spnadobject.Remove($spn)
                    $adentry.CommitChanges()
                    Write-Message -Message "Remove SPN $spn for $serviceaccount" -Level Verbose
                    $set = $false
                    $status = "Successfully removed SPN"
                }
            } catch {
                Write-Message -Message "Could not remove SPN. $($_.Exception.Message)" -Level Warning -EnableException $EnableException.ToBool() -ErrorRecord $_ -Target $ServiceAccountWrite
                $set = $true
                $status = "Failed to remove SPN"
                $delegate = $false
            }

            [pscustomobject]@{
                Name           = $spn
                ServiceAccount = $ServiceAccount
                Property       = "servicePrincipalName"
                IsSet          = $set
                Notes          = $status
            }
        }
        # if we removed the SPN, we should clean up also the delegation
        if ($PSCmdlet.ShouldProcess("$spn", "Removing delegation for service account for SPN")) {
            # if we didn't remove the SPN we shouldn't do anything
            if ($delegate) {
                # even if we removed the SPN, delegation could have been not set at all. We should not raise an error
                if ($adentry.Properties['msDS-AllowedToDelegateTo'] -notcontains $spn) {
                    [pscustomobject]@{
                        Name           = $spn
                        ServiceAccount = $ServiceAccount
                        Property       = "msDS-AllowedToDelegateTo"
                        IsSet          = $false
                        Notes          = "Delegation not found"
                    }
                } else {
                    # we indeed need the cleanup
                    try {
                        $null = $adentry.Properties['msDS-AllowedToDelegateTo'].Remove($spn)
                        $adentry.CommitChanges()
                        Write-Message -Message "Removed kerberos delegation $spn for $ServiceAccount" -Level Verbose
                        $set = $false
                        $status = "Successfully removed delegation"
                    } catch {
                        Write-Message -Message "Could not remove delegation. $($_.Exception.Message)" -Level Warning -EnableException $EnableException.ToBool() -ErrorRecord $_ -Target $ServiceAccount
                        $set = $true
                        $status = "Failed to remove delegation"
                    }

                    [pscustomobject]@{
                        Name           = $spn
                        ServiceAccount = $ServiceAccount
                        Property       = "msDS-AllowedToDelegateTo"
                        IsSet          = $set
                        Notes          = $status
                    }
                }
            }

        }
    }
}

tools\dbatools\functions\Remove-DbaTrace.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Remove-DbaTrace {
    <#
    .SYNOPSIS
        Stops and closes the specified trace and deletes its definition from the server.

    .DESCRIPTION
        Stops and closes the specified trace and deletes its definition from the server.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Id
        A list of trace ids.

    .PARAMETER InputObject
        Internal parameter for piping.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Security, Trace
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Remove-DbaTrace -SqlInstance sql2008

        Stops and removes all traces on sql2008

    .EXAMPLE
        PS C:\> Remove-DbaTrace -SqlInstance sql2008 -Id 1

        Stops and removes all trace with ID 1 on sql2008

    .EXAMPLE
        PS C:\> Get-DbaTrace -SqlInstance sql2008 | Out-GridView -PassThru | Remove-DbaTrace

        Stops and removes selected traces on sql2008

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [int[]]$Id,
        [parameter(ValueFromPipeline)]
        [object[]]$InputObject,
        [switch]$EnableException
    )
    process {
        if (-not $InputObject -and $SqlInstance) {
            $InputObject = Get-DbaTrace -SqlInstance $SqlInstance -SqlCredential $SqlCredential -Id $Id
        }

        foreach ($trace in $InputObject) {
            if (-not $trace.id -and -not $trace.Parent) {
                Stop-Function -Message "Input is of the wrong type. Use Get-DbaTrace." -Continue
                return
            }

            $server = $trace.Parent
            $traceid = $trace.id
            $default = Get-DbaTrace -SqlInstance $server -Default

            if ($default.id -eq $traceid) {
                Stop-Function -Message "The default trace on $server cannot be stopped. Use Set-DbaSpConfigure to turn it off." -Continue
            }

            $stopsql = "sp_trace_setstatus $traceid, 0"
            $removesql = "sp_trace_setstatus $traceid, 2"

            if ($Pscmdlet.ShouldProcess($traceid, "Removing the trace flag")) {
                try {
                    $server.Query($stopsql)
                    if (Get-DbaTrace -SqlInstance $server -Id $traceid) {
                        $server.Query($removesql)
                    }
                    [pscustomobject]@{
                        ComputerName = $server.ComputerName
                        InstanceName = $server.ServiceName
                        SqlInstance  = $server.DomainInstanceName
                        Id           = $traceid
                        Status       = "Stopped, closed and deleted"
                    }
                } catch {
                    Stop-Function -Message "Failure" -ErrorRecord $_ -Target $server -Continue
                    return
                }
            }
        }
    }
}

tools\dbatools\functions\Remove-DbaXESession.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Remove-DbaXESession {
    <#
    .SYNOPSIS
        Removes Extended Events sessions.

    .DESCRIPTION
        This script removes Extended Events sessions on a SQL Server instance.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2008 or higher.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Session
        Specifies a list of Extended Events sessions to remove.

    .PARAMETER AllSessions
        If this switch is enabled, all Extended Events sessions will be removed except the packaged sessions AlwaysOn_health, system_health, telemetry_xevents.

    .PARAMETER InputObject
        Accepts a collection of XEsession objects as output by Get-DbaXESession.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: ExtendedEvent, XE, XEvent
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Remove-DbaXESession

    .EXAMPLE
        PS C:\> Remove-DbaXESession -SqlInstance sql2012 -AllSessions

        Removes all Extended Event Session on the sqlserver2014 instance.

    .EXAMPLE
        PS C:\> Remove-DbaXESession -SqlInstance sql2012 -Session xesession1,xesession2

        Removes the xesession1 and xesession2 Extended Event sessions.

    .EXAMPLE
        PS C:\> Get-DbaXESession -SqlInstance sql2017 | Remove-DbaXESession -Confirm:$false

        Removes all sessions from sql2017, bypassing prompts.

    .EXAMPLE
        PS C:\> Get-DbaXESession -SqlInstance sql2012 -Session xesession1 | Remove-DbaXESession

        Removes the sessions returned from the Get-DbaXESession function.

    #>
    [CmdletBinding(DefaultParameterSetName = 'Session', SupportsShouldProcess, ConfirmImpact = 'High')]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseSingularNouns", "", Justification = "Internal functions are ignored")]
    param (
        [parameter(Position = 1, Mandatory, ParameterSetName = 'Session')]
        [parameter(Position = 1, Mandatory, ParameterSetName = 'All')]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [parameter(ParameterSetName = 'Session')]
        [parameter(ParameterSetName = 'All')]
        [PSCredential]$SqlCredential,
        [parameter(Mandatory, ParameterSetName = 'Session')]
        [Alias("Sessions")]
        [object[]]$Session,
        [parameter(Mandatory, ParameterSetName = 'All')]
        [switch]$AllSessions,
        [parameter(Mandatory, ValueFromPipeline, ParameterSetName = 'Object')]
        [Microsoft.SqlServer.Management.XEvent.Session[]]$InputObject,
        [switch]$EnableException
    )

    begin {
        # Remove each XESession
        function Remove-XESessions {
            [CmdletBinding(SupportsShouldProcess)]
            param ([Microsoft.SqlServer.Management.XEvent.Session[]]$xeSessions)

            foreach ($xe in $xeSessions) {
                $instance = $xe.Parent.Name
                $session = $xe.Name

                if ($Pscmdlet.ShouldProcess("$instance", "Removing XEvent Session $session")) {
                    try {
                        $xe.Drop()
                        [pscustomobject]@{
                            ComputerName = $xe.Parent.ComputerName
                            InstanceName = $xe.Parent.ServiceName
                            SqlInstance  = $xe.Parent.DomainInstanceName
                            Session      = $session
                            Status       = "Removed"
                        }
                    } catch {
                        Stop-Function -Message "Could not remove XEvent Session on $instance" -Target $session -ErrorRecord $_ -Continue
                    }
                }
            }
        }
    }

    process {
        if ($InputObject) {
            # avoid the collection issue
            $sessions = Get-DbaXESession -SqlInstance $InputObject.Parent -Session $InputObject.Name
            foreach ($item in $sessions) {
                Remove-XESessions $item
            }
        } else {
            foreach ($instance in $SqlInstance) {
                $xeSessions = Get-DbaXESession -SqlInstance $instance -SqlCredential $SqlCredential

                # Filter xeSessions based on parameters
                if ($Session) {
                    $xeSessions = $xeSessions | Where-Object { $_.Name -in $Session }
                } elseif ($AllSessions) {
                    $systemSessions = @('AlwaysOn_health', 'system_health', 'telemetry_xevents')
                    $xeSessions = $xeSessions | Where-Object { $_.Name -notin $systemSessions }
                }

                Remove-XESessions $xeSessions
            }
        }
    }
}

tools\dbatools\functions\Remove-DbaXESmartTarget.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Remove-DbaXESmartTarget {
    <#
    .SYNOPSIS
        Removes XESmartTarget PowerShell jobs.

    .DESCRIPTION
        Removes XESmartTarget PowerShell jobs.

    .PARAMETER InputObject
        Specifies one or more XESmartTarget job objects as output by Get-DbaXESmartTarget.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: ExtendedEvent, XE, XEvent
        Author: Chrissy LeMaire (@cl) | SmartTarget by Gianluca Sartori (@spaghettidba)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        https://github.com/spaghettidba/XESmartTarget/wiki

    .LINK
        https://dbatools.io/Remove-DbaXESmartTarget

    .EXAMPLE
        PS C:\> Get-DbaXESmartTarget | Remove-DbaXESmartTarget

        Removes all XESmartTarget jobs.

    .EXAMPLE
        PS C:\> Get-DbaXESmartTarget | Where-Object Id -eq 2 | Remove-DbaXESmartTarget

        Removes a specific XESmartTarget job.

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [object[]]$InputObject,
        [switch]$EnableException
    )
    process {
        if ($Pscmdlet.ShouldProcess("localhost", "Removing job $id")) {
            try {
                $id = $InputObject.Id
                Write-Message -Level Output -Message "Removing job $id, this may take a couple minutes."
                Get-Job -ID $InputObject.Id | Remove-Job -Force
                Write-Message -Level Output -Message "Successfully removed $id."
            } catch {
                Stop-Function -Message "Failure" -ErrorRecord $_
            }
        }
    }
}

tools\dbatools\functions\Rename-DbaDatabase.ps1

function Rename-DbaDatabase {
    <#
    .SYNOPSIS
        Changes database name, logical file names, file group names and physical file names (optionally handling the move). BETA VERSION.

    .DESCRIPTION
        Can change every database metadata that can be renamed.
        The ultimate goal is choosing to have a default template to enforce in your environment
        so your naming convention for every bit can be put in place in no time.
        The process is as follows (it follows the hierarchy of the entities):
        - database name is changed (optionally, forcing users out)
        - filegroup name(s) are changed accordingly
        - logical name(s) are changed accordingly
        - physical file(s) are changed accordingly
        - if Move is specified, the database will be taken offline and the move will initiate, then it will be taken online
        - if Move is not specified, the database remains online (unless SetOffline), and you are in charge of moving files
        If any of the above fails, the process stops.
        Please take a backup of your databases BEFORE using this, and remember to backup AFTER (also a FULL backup of master)

        It returns an object for each database with all the renames done, plus hidden properties showing a "human" representation of them.

        It's better you store the resulting object in a variable so you can inspect it in case of issues, e.g. "$result = Rename-DbaDatabase ....."

        To get a grasp without worrying of what would happen under the hood, use "Rename-DbaDatabase .... -Preview | Select-Object *"

    .PARAMETER SqlInstance
        Target any number of instances, in order to return their build state.

    .PARAMETER SqlCredential
        When connecting to an instance, use the credentials specified.

    .PARAMETER Database
        Targets only specified databases

    .PARAMETER ExcludeDatabase
        Excludes only specified databases

    .PARAMETER AllDatabases
        If you want to apply the naming convention system wide, you need to pass this parameter

    .PARAMETER DatabaseName
        Pass a template to rename the database name. Valid placeholders are:
        - <DBN> current database name
        - <DATE> date (yyyyMMdd)

    .PARAMETER FileGroupName
        Pass a template to rename file group name. Valid placeholders are:
        - <FGN> current filegroup name
        - <DBN> current database name
        - <DATE> date (yyyyMMdd)
        If distinct names cannot be generated, a counter will be appended (0001, 0002, 0003, etc)

    .PARAMETER LogicalName
        Pass a template to rename logical name. Valid placeholders are:
        - <FT> file type (ROWS, LOG)
        - <LGN> current logical name
        - <FGN> current filegroup name
        - <DBN> current database name
        - <DATE> date (yyyyMMdd)
        If distinct names cannot be generated, a counter will be appended (0001, 0002, 0003, etc)

    .PARAMETER FileName
        Pass a template to rename file name. Valid placeholders are:
        - <FNN> current file name (the basename, without directory nor extension)
        - <FT> file type (ROWS, LOG, MMO, FS)
        - <LGN> current logical name
        - <FGN> current filegroup name
        - <DBN> current database name
        - <DATE> date (yyyyMMdd)
        If distinct names cannot be generated, a counter will be appended (0001, 0002, 0003, etc)

    .PARAMETER ReplaceBefore
        If you pass this switch, all upper level "current names" will be inspected and replaced BEFORE doing the
        rename according to the template in the current level (remember the hierarchy):
        Let's say you have a database named "dbatools_HR", composed by 3 files
        - dbatools_HR_Data.mdf
        - dbatools_HR_Index.ndf
        - dbatools_HR_log.ldf
        Rename-DbaDatabase .... -Database "dbatools_HR" -DatabaseName "dbatools_HRARCHIVE" -FileName '<DBN><FNN>'
        would end up with this logic:
        - database --> no placeholders specified
        - dbatools_HR to dbatools_HRARCHIVE
        - filenames placeholders specified
        <DBN><FNN> --> current database name + current filename"
        - dbatools_HR_Data.mdf to dbatools_HRARCHIVEdbatools_HR_Data.mdf
        - dbatools_HR_Index.mdf to dbatools_HRARCHIVEdbatools_HR_Data.mdf
        - dbatools_HR_log.ldf to dbatools_HRARCHIVEdbatools_HR_log.ldf
        Passing this switch, instead, e.g.
        Rename-DbaDatabase .... -Database "dbatools_HR" -DatabaseName "dbatools_HRARCHIVE" -FileName '<DBN><FNN>' -ReplaceBefore
        end up with this logic instead:
        - database --> no placeholders specified
        - dbatools_HR to dbatools_HRARCHIVE
        - filenames placeholders specified,
        <DBN><FNN>, plus -ReplaceBefore --> current database name + replace OLD "upper level" names inside the current filename
        - dbatools_HR_Data.mdf to dbatools_HRARCHIVE_Data.mdf
        - dbatools_HR_Index.mdf to dbatools_HRARCHIVE_Data.mdf
        - dbatools_HR_log.ldf to dbatools_HRARCHIVE_log.ldf

    .PARAMETER Force
        Kills any open session to be able to do renames.

    .PARAMETER SetOffline
        Kills any open session and sets the database offline to be able to move files

    .PARAMETER Move
        If you want this function to move files, else you're the one in charge of it.
        This enables the same functionality as SetOffline, killing open transactions and putting the database
        offline, then do the actual rename and setting it online again afterwards

    .PARAMETER Preview
        Shows the renames without performing any operation (recommended to find your way around this function parameters ;-) )

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER InputObject
        Accepts piped database objects

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Database, Rename
        Author: Simone Bizzotto (@niphold)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Rename-DbaDatabase

    .EXAMPLE
        PS C:\> Rename-DbaDatabase -SqlInstance sqlserver2014a -Database HR -DatabaseName HR2 -Preview | select *

        Shows the detailed result set you'll get renaming the HR database to HR2 without doing anything

    .EXAMPLE
        PS C:\> Rename-DbaDatabase -SqlInstance sqlserver2014a -Database HR -DatabaseName HR2

        Renames the HR database to HR2

    .EXAMPLE
        PS C:\> Get-DbaDatabase -SqlInstance sqlserver2014a -Database HR | Rename-DbaDatabase -DatabaseName HR2

        Same as before, but with a piped database (renames the HR database to HR2)

    .EXAMPLE
        PS C:\> Rename-DbaDatabase -SqlInstance sqlserver2014a -Database HR -DatabaseName "dbatools_<DBN>"

        Renames the HR database to dbatools_HR

    .EXAMPLE
        PS C:\> Rename-DbaDatabase -SqlInstance sqlserver2014a -Database HR -DatabaseName "dbatools_<DBN>_<DATE>"

        Renames the HR database to dbatools_HR_20170807 (if today is 07th Aug 2017)

    .EXAMPLE
        PS C:\> Rename-DbaDatabase -SqlInstance sqlserver2014a -Database HR -FileGroupName "dbatools_<FGN>"

        Renames every FileGroup within HR to "dbatools_[the original FileGroup name]"

    .EXAMPLE
        PS C:\> Rename-DbaDatabase -SqlInstance sqlserver2014a -Database HR -DatabaseName "dbatools_<DBN>" -FileGroupName "<DBN>_<FGN>"

        Renames the HR database to "dbatools_HR", then renames every FileGroup within to "dbatools_HR_[the original FileGroup name]"

    .EXAMPLE
        PS C:\> Rename-DbaDatabase -SqlInstance sqlserver2014a -Database HR -FileGroupName "dbatools_<DBN>_<FGN>"
        PS C:\> Rename-DbaDatabase -SqlInstance sqlserver2014a -Database HR -DatabaseName "dbatools_<DBN>"

        Renames the HR database to "dbatools_HR", then renames every FileGroup within to "dbatools_HR_[the original FileGroup name]"

    .EXAMPLE
        PS C:\> Rename-DbaDatabase -SqlInstance sqlserver2014a -Database HR -DatabaseName "dbatools_<DBN>" -FileName "<DBN>_<FGN>_<FNN>"

        Renames the HR database to "dbatools_HR" and then all filenames as "dbatools_HR_[Name of the FileGroup]_[original_filename]"
        The db stays online (watch out!). You can then proceed manually to move/copy files by hand, set the db offline and then online again to finish the rename process

    .EXAMPLE
        PS C:\> Rename-DbaDatabase -SqlInstance sqlserver2014a -Database HR -DatabaseName "dbatools_<DBN>" -FileName "<DBN>_<FGN>_<FNN>" -SetOffline

        Renames the HR database to "dbatools_HR" and then all filenames as "dbatools_HR_[Name of the FileGroup]_[original_filename]"
        The db is then set offline (watch out!). You can then proceed manually to move/copy files by hand and then set it online again to finish the rename process

    .EXAMPLE
        PS C:\> Rename-DbaDatabase -SqlInstance sqlserver2014a -Database HR -DatabaseName "dbatools_<DBN>" -FileName "<DBN>_<FGN>_<FNN>" -Move

        Renames the HR database to "dbatools_HR" and then all filenames as "dbatools_HR_[Name of the FileGroup]_[original_filename]"
        The db is then set offline (watch out!). The function tries to do a simple rename and then sets the db online again to finish the rename process

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [parameter(Mandatory, ParameterSetName = "Server")]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]
        $SqlCredential,
        [parameter(ParameterSetName = "Server")]
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [switch]$AllDatabases,
        [string]$DatabaseName,
        [string]$FileGroupName,
        [string]$LogicalName,
        [string]$FileName,
        [switch]$ReplaceBefore,
        [switch]$Force,
        [switch]$Move,
        [switch]$SetOffline,
        [switch]$Preview,
        [parameter(Mandatory, ValueFromPipeline, ParameterSetName = "Pipe")]
        [Microsoft.SqlServer.Management.Smo.Database[]]$InputObject,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        $CurrentDate = Get-Date -Format 'yyyyMMdd'

        function Get-DbaNameStructure($database) {
            $obj = @()
            # db name
            $obj += "- Database : $database"
            # FileGroups
            foreach ($fg in $database.FileGroups) {
                $obj += "  - FileGroup: $($fg.Name)"
                # LogicalNames
                foreach ($ln in $fg.Files) {
                    $obj += "    - Logical: $($ln.Name)"
                    $obj += "      - FileName: $($ln.FileName)"
                }
            }
            $obj += "  - Logfiles"
            foreach ($log in $database.LogFiles) {
                $obj += "    - Logical: $($log.Name)"
                $obj += "      - FileName: $($log.FileName)"
            }
            return $obj -Join "`n"
        }


        function Get-DbaKeyByValue($hashtable, $Value) {
            ($hashtable.GetEnumerator() | Where-Object Value -eq $Value).Name
        }

        if ((Test-Bound -ParameterName SetOffline) -and (-not(Test-Bound -ParameterName FileName))) {
            Stop-Function -Category InvalidArgument -Message "-SetOffline is only useful when -FileName is passed. Quitting."
        }
    }
    process {
        if (Test-FunctionInterrupt) { return }
        if (!$Database -and !$AllDatabases -and !$InputObject -and !$ExcludeDatabase) {
            Stop-Function -Message "You must specify a -AllDatabases or -Database/ExcludeDatabase to continue"
            return
        }
        if (!$DatabaseName -and !$FileGroupName -and !$LogicalName -and !$FileName) {
            Stop-Function -Message "You must specify at least one of -DatabaseName,-FileGroupName,-LogicalName or -Filename to continue"
            return
        }
        $dbs = @()
        if ($InputObject) {
            if ($InputObject.Name) {
                # comes from Get-DbaDatabase
                $dbs += $InputObject
            }
        } else {
            foreach ($instance in $SqlInstance) {
                try {
                    $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlCredential
                } catch {
                    Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
                }
                $all_dbs = $server.Databases | Where-Object IsAccessible
                $dbs += $all_dbs | Where-Object { @('master', 'model', 'msdb', 'tempdb', 'distribution') -notcontains $_.Name }
                if ($Database) {
                    $dbs = $dbs | Where-Object { $Database -contains $_.Name }
                }
                if ($ExcludeDatabase) {
                    $dbs = $dbs | Where-Object { $ExcludeDatabase -notcontains $_.Name }
                }
            }
        }

        # holds all dbs per instance to avoid naming clashes
        $InstanceDbs = @{}

        # holds all db file enumerations (used for -Move only)
        $InstanceFiles = @{}

        #region db loop
        foreach ($db in $dbs) {
            # used to stop futher operations on database
            $failed = $false

            # pending renames initialized at db level
            $Pending_Renames = @()

            $Entities_Before = @{}

            $server = $db.Parent
            if ($db.Name -in @('master', 'model', 'msdb', 'tempdb', 'distribution')) {
                Write-Message -Level Warning -Message "Database $($db.Name) is a system one, skipping..."
                continue
            }
            if (!$db.IsAccessible) {
                Write-Message -Level Warning -Message "Database $($db.Name) is not accessible, skipping..."
                continue
            }
            if ($db.IsMirroringEnabled -eq $true -or $db.AvailabilityGroupName.Length -gt 0) {
                Write-Message -Level Warning -Message "Database $($db.Name) is either mirrored or in an AG, skipping..."
                continue
            }
            $Server_Id = $server.DomainInstanceName
            if ( !$InstanceDbs.ContainsKey($Server_Id) ) {
                $InstanceDbs[$Server_Id] = @{}
                foreach ($dn in $server.Databases.Name) {
                    $InstanceDbs[$Server_Id][$dn] = 1
                }
            }

            $Entities_Before['DBN'] = @{}
            $Entities_Before['FGN'] = @{}
            $Entities_Before['LGN'] = @{}
            $Entities_Before['FNN'] = @{}
            $Entities_Before['DBN'][$db.Name] = $db.Name
            #region databasename
            if ($DatabaseName) {
                $Orig_DBName = $db.Name
                # fixed replacements
                $NewDBName = $DatabaseName.Replace('<DBN>', $Orig_DBName).Replace('<DATE>', $CurrentDate)
                if ($Orig_DBName -eq $NewDBName) {
                    Write-Message -Level VeryVerbose -Message "Database name unchanged, skipping"
                } else {
                    if ($InstanceDbs[$Server_Id].ContainsKey($NewDBName)) {
                        Write-Message -Level Warning -Message "Database $NewDBName exists already, skipping this rename"
                        $failed = $true
                    } else {
                        if ($PSCmdlet.ShouldProcess($db, "Renaming Database $db to $NewDBName")) {
                            if ($Force) {
                                $server.KillAllProcesses($Orig_DBName)
                            }
                            try {
                                if (!$Preview) {
                                    $db.Rename($NewDBName)
                                }
                                $InstanceDbs[$Server_Id].Remove($Orig_DBName)
                                $InstanceDbs[$Server_Id][$NewDBName] = 1
                                $Entities_Before['DBN'][$Orig_DBName] = $NewDBName
                                #$db.Refresh()
                            } catch {
                                Stop-Function -Message "Failed to rename Database : $($_.Exception.InnerException.InnerException.InnerException)" -ErrorRecord $_ -Target $server.DomainInstanceName -OverrideExceptionMessage
                                # stop any further renames
                                $failed = $true
                            }
                        }
                    }
                }
            }
            #endregion databasename
            #region filegroupname
            if ($ReplaceBefore) {
                #backfill PRIMARY
                $Entities_Before['FGN']['PRIMARY'] = 'PRIMARY'
                foreach ($fg in $db.FileGroups.Name) {
                    $Entities_Before['FGN'][$fg] = $fg
                }
            }

            if (!$failed -and $FileGroupName) {
                $Editable_FGs = $db.FileGroups | Where-Object Name -ne 'PRIMARY'
                $New_FGNames = @{}
                foreach ($fg in $db.FileGroups.Name) {
                    $New_FGNames[$fg] = 1
                }
                $FGCounter = 0
                foreach ($fg in $Editable_FGs) {
                    $Orig_FGName = $fg.Name
                    $Orig_Placeholder = $Orig_FGName
                    if ($ReplaceBefore) {
                        # at Filegroup level, we need to worry about database name
                        $Orig_Placeholder = $Orig_Placeholder.Replace($Entities_Before['DBN'][$Orig_DBName], '')
                    }
                    $NewFGName = $FileGroupName.Replace('<DBN>', $Entities_Before['DBN'][$db.Name]).Replace('<DATE>', $CurrentDate).Replace('<FGN>', $Orig_Placeholder)
                    $FinalFGName = $NewFGName
                    while ($fg.Name -ne $FinalFGName) {
                        if ($FinalFGName -in $New_FGNames.Keys) {
                            $FGCounter += 1
                            $FinalFGName = "$NewFGName$($FGCounter.ToString('000'))"
                        } else {
                            break
                        }
                    }
                    if ($fg.Name -eq $FinalFGName) {
                        Write-Message -Level VeryVerbose -Message "No rename necessary for FileGroup $($fg.Name) (on $db)"
                        continue
                    }
                    if ($PSCmdlet.ShouldProcess($db, "Renaming FileGroup $($fg.Name) to $FinalFGName")) {
                        try {
                            if (!$Preview) {
                                $fg.Rename($FinalFGName)
                            }
                            $New_FGNames.Remove($Orig_FGName)
                            $New_FGNames[$FinalFGName] = 1
                            $Entities_Before['FGN'][$Orig_FGName] = $FinalFGName
                        } catch {
                            Stop-Function -Message "Failed to rename FileGroup : $($_.Exception.InnerException.InnerException.InnerException)" -ErrorRecord $_ -Target $server.DomainInstanceName -OverrideExceptionMessage
                            # stop any further renames
                            $failed = $true
                            break
                        }
                    }
                }
                #$db.FileGroups.Refresh()
            }

            #endregion filegroupname
            #region logicalname
            if ($ReplaceBefore) {
                foreach ($fn in $db.FileGroups.Files.Name) {
                    $Entities_Before['LGN'][$fn] = $fn
                }
                foreach ($fn in $db.Logfiles.Name) {
                    $Entities_Before['LGN'][$fn] = $fn
                }
            }
            if (!$failed -and $LogicalName) {
                $New_LogicalNames = @{}
                foreach ($fn in $db.FileGroups.Files.Name) {
                    $New_LogicalNames[$fn] = 1
                }
                foreach ($fn in $db.Logfiles.Name) {
                    $New_LogicalNames[$fn] = 1
                }
                $LNCounter = 0
                foreach ($fg in $db.FileGroups) {
                    $logicalfiles = @($fg.Files)
                    for ($i = 0; $i -lt $logicalfiles.Count; $i++) {
                        $logical = $logicalfiles[$i]
                        $FileType = switch ($fg.FileGroupType) {
                            'RowsFileGroup' { 'ROWS' }
                            'MemoryOptimizedDataFileGroup' { 'MMO' }
                            'FileStreamDataFileGroup' { 'FS' }
                            default { 'STD' }
                        }
                        $Orig_LGName = $logical.Name
                        $Orig_Placeholder = $Orig_LGName
                        if ($ReplaceBefore) {
                            # at Logical Name level, we need to worry about database name and filegroup name
                            $Orig_Placeholder = $Orig_Placeholder.Replace((Get-DbaKeyByValue -HashTable $Entities_Before['DBN'] -Value $db.Name), '').Replace(
                                (Get-DbaKeyByValue -HashTable $Entities_Before['FGN'] -Value $fg.Name), '')
                        }
                        $NewLGName = $LogicalName.Replace('<DBN>', $db.Name).Replace('<DATE>', $CurrentDate).Replace('<FGN>', $fg.Name).Replace(
                            '<FT>', $FileType).Replace('<LGN>', $Orig_Placeholder)
                        $FinalLGName = $NewLGName
                        while ($logical.Name -ne $FinalLGName) {
                            if ($FinalLGName -in $New_LogicalNames.Keys) {
                                $LNCounter += 1
                                $FinalLGName = "$NewLGName$($LNCounter.ToString('000'))"
                            } else {
                                break
                            }
                        }
                        if ($logical.Name -eq $FinalLGName) {
                            Write-Message -Level VeryVerbose -Message "No rename necessary for LogicalFile $($logical.Name) (on FileGroup $($fg.Name) (on $db))"
                            continue
                        }
                        if ($PSCmdlet.ShouldProcess($db, "Renaming LogicalFile $($logical.Name) to $FinalLGName (on FileGroup $($fg.Name))")) {
                            try {
                                if (!$Preview) {
                                    $logical.Rename($FinalLGName)
                                }
                                $New_LogicalNames.Remove($Orig_LGName)
                                $New_LogicalNames[$FinalLGName] = 1
                                $Entities_Before['LGN'][$Orig_LGName] = $FinalLGName
                            } catch {
                                Stop-Function -Message "Failed to Rename Logical File : $($_.Exception.InnerException.InnerException.InnerException)" -ErrorRecord $_ -Target $server.DomainInstanceName -OverrideExceptionMessage
                                # stop any further renames
                                $failed = $true
                                break
                            }
                        }
                    }
                }
                #$fg.Files.Refresh()
                if (!$failed) {
                    $logfiles = @($db.LogFiles)
                    for ($i = 0; $i -lt $logfiles.Count; $i++) {
                        $logicallog = $logfiles[$i]
                        $Orig_LGName = $logicallog.Name
                        $Orig_Placeholder = $Orig_LGName
                        if ($ReplaceBefore) {
                            # at Logical Name level, we need to worry about database name and filegroup name, but for logfiles filegroup is not there
                            $Orig_Placeholder = $Orig_Placeholder.Replace((Get-DbaKeyByValue -HashTable $Entities_Before['DBN'] -Value $db.Name), '').Replace(
                                (Get-DbaKeyByValue -HashTable $Entities_Before['FGN'] -Value $fg.Name), '')
                        }
                        $NewLGName = $LogicalName.Replace('<DBN>', $db.Name).Replace('<DATE>', $CurrentDate).Replace('<FGN>', '').Replace(
                            '<FT>', 'LOG').Replace('<LGN>', $Orig_Placeholder)
                        $FinalLGName = $NewLGName
                        if ($FinalLGName.Length -eq 0) {
                            #someone passed in -LogicalName '<FGN>'.... but we don't have FGN here
                            $FinalLGName = $Orig_LGName
                        }
                        while ($logicallog.Name -ne $FinalLGName) {
                            if ($FinalLGName -in $New_LogicalNames.Keys) {
                                $LNCounter += 1
                                $FinalLGName = "$NewLGName$($LNCounter.ToString('000'))"
                            } else {
                                break
                            }
                        }
                        if ($logicallog.Name -eq $FinalLGName) {
                            Write-Message -Level VeryVerbose -Message "No Rename necessary for LogicalFile log $($logicallog.Name) (LOG on (on $db))"
                            continue
                        }
                        if ($PSCmdlet.ShouldProcess($db, "Renaming LogicalFile log $($logicallog.Name) to $FinalLGName (LOG)")) {
                            try {
                                if (!$Preview) {
                                    $logicallog.Rename($FinalLGName)
                                }
                                $New_LogicalNames.Remove($Orig_LGName)
                                $New_LogicalNames[$FinalLGName] = 1
                                $Entities_Before['LGN'][$Orig_LGName] = $FinalLGName
                            } catch {
                                Stop-Function -Message "Failed to Rename Logical File : $($_.Exception.InnerException.InnerException.InnerException)" -ErrorRecord $_ -Target $server.DomainInstanceName -OverrideExceptionMessage
                                # stop any further renames
                                $failed = $true
                                break
                            }
                        }
                    }
                    #$db.Logfiles.Refresh()
                }
            }
            #endregion logicalname
            #region filename
            if ($ReplaceBefore) {
                foreach ($fn in $db.FileGroups.Files.FileName) {
                    $Entities_Before['FNN'][$fn] = $fn
                }
                foreach ($fn in $db.Logfiles.FileName) {
                    $Entities_Before['FNN'][$fn] = $fn
                }
            }
            if (!$failed -and $FileName) {

                $New_FileNames = @{}
                foreach ($fn in $db.FileGroups.Files.FileName) {
                    $New_FileNames[$fn] = 1
                }
                foreach ($fn in $db.Logfiles.FileName) {
                    $New_FileNames[$fn] = 1
                }
                # we need to inspect what files are in the same directory
                # to avoid failing the process because the move won't work
                # here we have a dict keyed by instance and then keyed by path
                if ( !$InstanceFiles.ContainsKey($Server_Id) ) {
                    $InstanceFiles[$Server_Id] = @{}
                }
                foreach ($fn in $New_FileNames.Keys) {
                    $dirname = [IO.Path]::GetDirectoryName($fn)
                    if ( !$InstanceFiles[$Server_Id].ContainsKey($dirname) ) {
                        $InstanceFiles[$Server_Id][$dirname] = @{}
                        try {
                            $dirfiles = Get-DbaFile -SqlInstance $server -Path $dirname -EnableException
                        } catch {
                            Write-Message -Level Warning -Message "Failed to enumerate existing files at $dirname, move could go wrong"
                        }
                        foreach ($f in $dirfiles) {
                            $InstanceFiles[$Server_Id][$dirname][$f.Filename] = 1
                        }
                    }
                }
                $FNCounter = 0
                foreach ($fg in $db.FileGroups) {
                    $FG_Files = @($fg.Files)
                    foreach ($logical in $FG_Files) {
                        $FileType = switch ($fg.FileGroupType) {
                            'RowsFileGroup' { 'ROWS' }
                            'MemoryOptimizedDataFileGroup' { 'MMO' }
                            'FileStreamDataFileGroup' { 'FS' }
                            default { 'STD' }
                        }
                        $FNName = $logical.FileName
                        $FNNameDir = [IO.Path]::GetDirectoryName($FNName)
                        $Orig_FNNameLeaf = [IO.Path]::GetFileNameWithoutExtension($logical.FileName)
                        $Orig_Placeholder = $Orig_FNNameLeaf
                        if ($ReplaceBefore) {
                            # at Filename level, we need to worry about database name, filegroup name and logical file name
                            $Orig_Placeholder = $Orig_Placeholder.Replace((Get-DbaKeyByValue -HashTable $Entities_Before['DBN'] -Value $db.Name), '').Replace(
                                (Get-DbaKeyByValue -HashTable $Entities_Before['FGN'] -Value $fg.Name), '').Replace(
                                (Get-DbaKeyByValue -HashTable $Entities_Before['LGN'] -Value $logical.Name), '')
                        }
                        $NewFNName = $FileName.Replace('<DBN>', $db.Name).Replace('<DATE>', $CurrentDate).Replace('<FGN>', $fg.Name).Replace(
                            '<FT>', $FileType).Replace('<LGN>', $logical.Name).Replace('<FNN>', $Orig_Placeholder)
                        $FinalFNName = [IO.Path]::Combine($FNNameDir, "$NewFNName$([IO.Path]::GetExtension($FNName))")

                        while ($logical.FileName -ne $FinalFNName) {
                            if ($InstanceFiles[$Server_Id][$FNNameDir].ContainsKey($FinalFNName)) {
                                $FNCounter += 1
                                $FinalFNName = [IO.Path]::Combine($FNNameDir, "$NewFNName$($FNCounter.ToString('000'))$([IO.Path]::GetExtension($FNName))"
                                )
                            } else {
                                break
                            }
                        }
                        if ($logical.FileName -eq $FinalFNName) {
                            Write-Message -Level VeryVerbose -Message "No rename necessary (on FileGroup $($fg.Name) (on $db))"
                            continue
                        }
                        if ($PSCmdlet.ShouldProcess($db, "Renaming FileName $($logical.FileName) to $FinalFNName (on FileGroup $($fg.Name))")) {
                            try {
                                if (!$Preview) {
                                    $logical.FileName = $FinalFNName
                                    $db.Alter()
                                }
                                $InstanceFiles[$Server_Id][$FNNameDir].Remove($FNName)
                                $InstanceFiles[$Server_Id][$FNNameDir][$FinalFNName] = 1
                                $Entities_Before['FNN'][$FNName] = $FinalFNName
                                $Pending_Renames += [pscustomobject]@{
                                    Source      = $FNName
                                    Destination = $FinalFNName
                                }
                            } catch {
                                Stop-Function -Message "Failed to Rename FileName : $($_.Exception.InnerException.InnerException.InnerException)" -ErrorRecord $_ -Target $server.DomainInstanceName -OverrideExceptionMessage
                                # stop any further renames
                                $failed = $true
                                break
                            }
                        }
                    }
                    if (!$failed) {
                        $FG_Files = @($db.Logfiles)
                        foreach ($logical in $FG_Files) {
                            $FNName = $logical.FileName
                            $FNNameDir = [IO.Path]::GetDirectoryName($FNName)
                            $Orig_FNNameLeaf = [IO.Path]::GetFileNameWithoutExtension($logical.FileName)
                            $Orig_Placeholder = $Orig_FNNameLeaf
                            if ($ReplaceBefore) {
                                # at Filename level, we need to worry about database name, filegroup name and logical file name
                                $Orig_Placeholder = $Orig_Placeholder.Replace((Get-DbaKeyByValue -HashTable $Entities_Before['DBN'] -Value $db.Name), '').Replace(
                                    (Get-DbaKeyByValue -HashTable $Entities_Before['FGN'] -Value $fg.Name), '').Replace(
                                    (Get-DbaKeyByValue -HashTable $Entities_Before['LGN'] -Value $logical.Name), '')
                            }
                            $NewFNName = $FileName.Replace('<DBN>', $db.Name).Replace('<DATE>', $CurrentDate).Replace('<FGN>', '').Replace(
                                '<FT>', 'LOG').Replace('<LGN>', $logical.Name).Replace('<FNN>', $Orig_Placeholder)
                            $FinalFNName = [IO.Path]::Combine($FNNameDir, "$NewFNName$([IO.Path]::GetExtension($FNName))")
                            while ($logical.FileName -ne $FinalFNName) {
                                if ($InstanceFiles[$Server_Id][$FNNameDir].ContainsKey($FinalFNName)) {
                                    $FNCounter += 1
                                    $FinalFNName = [IO.Path]::Combine($FNNameDir, "$NewFNName$($FNCounter.ToString('000'))$([IO.Path]::GetExtension($FNName))")
                                } else {
                                    break
                                }
                            }
                            if ($logical.FileName -eq $FinalFNName) {
                                Write-Message -Level VeryVerbose -Message "No rename necessary for $($logical.FileName) (LOG on (on $db))"
                                continue
                            }

                            if ($PSCmdlet.ShouldProcess($db, "Renaming FileName $($logical.FileName) to $FinalFNName (LOG)")) {
                                try {
                                    if (!$Preview) {
                                        $logical.FileName = $FinalFNName
                                        $db.Alter()
                                    }
                                    $InstanceFiles[$Server_Id][$FNNameDir].Remove($FNName)
                                    $InstanceFiles[$Server_Id][$FNNameDir][$FinalFNName] = 1
                                    $Entities_Before['FNN'][$FNName] = $FinalFNName
                                    $Pending_Renames += [pscustomobject]@{
                                        Source      = $FNName
                                        Destination = $FinalFNName
                                    }
                                } catch {
                                    Stop-Function -Message "Failed to Rename FileName : $($_.Exception.InnerException.InnerException.InnerException)" -ErrorRecord $_ -Target $server.DomainInstanceName -OverrideExceptionMessage
                                    # stop any further renames
                                    $failed = $true
                                    break
                                }
                            }
                        }
                    }

                }
                #endregion filename
                #region move
                $ComputerName = $null
                $Final_Renames = New-Object System.Collections.ArrayList
                if ([DbaValidate]::IsLocalhost($server.ComputerName)) {
                    # locally ran so we can just use rename-item
                    $ComputerName = $server.ComputerName
                } else {
                    # let's start checking if we can access .ComputerName
                    $testPS = $false
                    if ($SqlCredential) {
                        # why does Test-PSRemoting require a Credential param ? this is ugly...
                        $testPS = Test-PSRemoting -ComputerName $server.ComputerName -Credential $SqlCredential -ErrorAction Stop
                    } else {
                        $testPS = Test-PSRemoting -ComputerName $server.ComputerName -ErrorAction Stop
                    }
                    if (!($testPS)) {
                        # let's try to resolve it to a more qualified name, without "cutting" knowledge about the domain (only $server.Name possibly holds the complete info)
                        $Resolved = (Resolve-DbaNetworkName -ComputerName $server.Name).FullComputerName
                        if ($SqlCredential) {
                            $testPS = Test-PSRemoting -ComputerName $Resolved -Credential $SqlCredential -ErrorAction Stop
                        } else {
                            $testPS = Test-PSRemoting -ComputerName $Resolved -ErrorAction Stop
                        }
                        if ($testPS) {
                            $ComputerName = $Resolved
                        }
                    } else {
                        $ComputerName = $server.ComputerName
                    }
                }
                foreach ($op in $pending_renames) {
                    if ([DbaValidate]::IsLocalhost($server.ComputerName)) {
                        $null = $Final_Renames.Add([pscustomobject]@{
                                Source       = $op.Source
                                Destination  = $op.Destination
                                ComputerName = $ComputerName
                            })
                    } else {
                        if ($null -eq $ComputerName) {
                            # if we don't have remote access ($ComputerName is null) we can fallback to admin shares if they're available
                            if (Test-Path (Join-AdminUnc -ServerName $server.ComputerName -filepath $op.Source)) {
                                $null = $Final_Renames.Add([pscustomobject]@{
                                        Source       = Join-AdminUnc -ServerName $server.ComputerName -filepath $op.Source
                                        Destination  = Join-AdminUnc -ServerName $server.ComputerName -filepath $op.Destination
                                        ComputerName = $server.ComputerName
                                    })
                            } else {
                                # flag the impossible rename ($ComputerName is $null)
                                $null = $Final_Renames.Add([pscustomobject]@{
                                        Source       = $op.Source
                                        Destination  = $op.Destination
                                        ComputerName = $ComputerName
                                    })
                            }
                        } else {
                            # we can do renames in a remote pssession
                            $null = $Final_Renames.Add([pscustomobject]@{
                                    Source       = $op.Source
                                    Destination  = $op.Destination
                                    ComputerName = $ComputerName
                                })
                        }
                    }
                }
                $Status = 'FULL'
                if (!$failed -and ($SetOffline -or $Move) -and $Final_Renames) {
                    if (!$Move) {
                        Write-Message -Level VeryVerbose -Message "Setting the database offline. You are in charge of moving the files to the new location"
                        # because renames still need to be dealt with
                        $Status = 'PARTIAL'
                    } else {
                        if ($PSCmdlet.ShouldProcess($db, "File Rename required, setting db offline")) {
                            $SetState = Set-DbaDbState -SqlInstance $server -Database $db.Name -Offline -Force
                            if ($SetState.Status -ne 'OFFLINE') {
                                Write-Message -Level Warning -Message "Setting db offline failed, You are in charge of moving the files to the new location"
                                # because it was impossible to set the database offline
                                $Status = 'PARTIAL'
                            } else {
                                try {
                                    while ($Final_Renames.Count -gt 0) {
                                        $op = $Final_Renames.Item(0)
                                        if ($null -eq $op.ComputerName) {
                                            Stop-Function -Message "No access to physical files for renames"
                                        } else {
                                            Write-Message -Level VeryVerbose -Message "Moving file $($op.Source) to $($op.Destination)"
                                            if (!$Preview) {
                                                $scriptblock = {
                                                    $op = $args[0]
                                                    Rename-Item -Path $op.Source -NewName $op.Destination
                                                }
                                                Invoke-Command2 -ComputerName $op.ComputerName -Credential $sqlCredential -ScriptBlock $scriptblock -ArgumentList $op
                                            }
                                        }
                                        $null = $Final_Renames.RemoveAt(0)
                                    }
                                } catch {
                                    $failed = $true
                                    # because a rename operation failed
                                    $Status = 'PARTIAL'
                                    Stop-Function -Message "Failed to rename $($op.Source) to $($op.Destination), you are in charge of moving the files to the new location" -ErrorRecord $_ -Target $instance -Exception $_.Exception -Continue
                                }
                                if (!$failed) {
                                    if ($PSCmdlet.ShouldProcess($db, "Setting database online")) {
                                        $SetState = Set-DbaDbState -SqlInstance $server -Database $db.Name -Online -Force
                                        if ($SetState.Status -ne 'ONLINE') {
                                            Write-Message -Level Warning -Message "Setting db online failed"
                                            # because renames were done, but the database didn't wake up
                                            $Status = 'PARTIAL'
                                        } else {
                                            $Status = 'FULL'
                                        }
                                    }
                                }
                            }
                        }
                    }
                } else {
                    # because of a previous error with renames to do
                    $Status = 'PARTIAL'
                }
            } else {
                if (!$failed) {
                    # because no previous error and not filename
                    $Status = 'FULL'
                } else {
                    # because previous errors and not filename
                    $Status = 'PARTIAL'
                }
            }
            #endregion move
            # remove entities that match for the output
            foreach ($k in $Entities_Before.Keys) {
                $ToRemove = $Entities_Before[$k].GetEnumerator() | Where-Object { $_.Name -eq $_.Value } | Select-Object -ExpandProperty Name
                foreach ($el in $ToRemove) {
                    $Entities_Before[$k].Remove($el)
                }
            }
            [pscustomobject]@{
                ComputerName       = $server.ComputerName
                InstanceName       = $server.ServiceName
                SqlInstance        = $server.DomainInstanceName
                Database           = $db
                DBN                = $Entities_Before['DBN']
                DatabaseRenames    = ($Entities_Before['DBN'].GetEnumerator() | Foreach-Object { "$($_.Name) --> $($_.Value)" }) -Join "`n"
                FGN                = $Entities_Before['FGN']
                FileGroupsRenames  = ($Entities_Before['FGN'].GetEnumerator() | Foreach-Object { "$($_.Name) --> $($_.Value)" }) -Join "`n"
                LGN                = $Entities_Before['LGN']
                LogicalNameRenames = ($Entities_Before['LGN'].GetEnumerator() | Foreach-Object { "$($_.Name) --> $($_.Value)"  }) -Join "`n"
                FNN                = $Entities_Before['FNN']
                FileNameRenames    = ($Entities_Before['FNN'].GetEnumerator() | Foreach-Object { "$($_.Name) --> $($_.Value)"  }) -Join "`n"
                PendingRenames     = $Final_Renames
                Status             = $Status
            } | Select-DefaultView -ExcludeProperty DatabaseRenames, FileGroupsRenames, LogicalNameRenames, FileNameRenames
        }
        #endregion db loop
    }
}

tools\dbatools\functions\Rename-DbaLogin.ps1

function Rename-DbaLogin {
    <#
    .SYNOPSIS
        Rename-DbaLogin will rename login and database mapping for a specified login.

    .DESCRIPTION
        There are times where you might want to rename a login that was copied down, or if the name is not descriptive for what it does.

        It can be a pain to update all of the mappings for a specific user, this does it for you.

    .PARAMETER SqlInstance
        Source SQL Server.You must have sysadmin access and server version must be SQL Server version 2000 or greater.

    .PARAMETER Destination
        Destination Sql Server. You must have sysadmin access and server version must be SQL Server version 2000 or greater.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Login
        The current Login on the server - this list is auto-populated from the server.

    .PARAMETER NewLogin
        The new Login that you wish to use. If it is a windows user login, then the SID must match.

    .PARAMETER Confirm
        Prompts to confirm actions

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Login
        Author: Mitchell Hamann (@SirCaptainMitch)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Rename-DbaLogin

    .EXAMPLE
        PS C:\>Rename-DbaLogin -SqlInstance localhost -Login DbaToolsUser -NewLogin captain

        SQL Login Example

    .EXAMPLE
        PS C:\>Rename-DbaLogin -SqlInstance localhost -Login domain\oldname -NewLogin domain\newname

        Change the windowsuser login name.

    .EXAMPLE
        PS C:\>Rename-DbaLogin -SqlInstance localhost -Login dbatoolsuser -NewLogin captain -WhatIf

        WhatIf Example

          #>
    [CmdletBinding(DefaultParameterSetName = "Default", SupportsShouldProcess)]
    param (
        [parameter(Mandatory)]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [parameter(Mandatory)]
        [string]$Login,
        [parameter(Mandatory)]
        [string]$NewLogin,
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $Databases = $server.Databases | Where-Object IsAccessible
            $currentLogin = $server.Logins[$Login]

            if ($Pscmdlet.ShouldProcess($SqlInstance, "Changing Login name from  [$Login] to [$NewLogin]")) {
                try {
                    $dbenums = $currentLogin.EnumDatabaseMappings()
                    $currentLogin.rename($NewLogin)
                    [pscustomobject]@{
                        ComputerName  = $server.ComputerName
                        InstanceName  = $server.ServiceName
                        SqlInstance   = $server.DomainInstanceName
                        Database      = $null
                        PreviousLogin = $Login
                        NewLogin      = $NewLogin
                        Status        = "Successful"
                    }
                } catch {
                    $dbenums = $null
                    [pscustomobject]@{
                        ComputerName  = $server.ComputerName
                        InstanceName  = $server.ServiceName
                        SqlInstance   = $server.DomainInstanceName
                        Database      = $null
                        PreviousLogin = $Login
                        NewLogin      = $NewLogin
                        Status        = "Failure"
                    }
                    Stop-Function -Message "Failure" -ErrorRecord $_ -Target $login
                }
            }

            foreach ($db in $dbenums) {
                $db = $databases[$db.DBName]
                $user = $db.Users[$Login]
                Write-Message -Level Verbose -Message "Starting update for $db"

                if ($Pscmdlet.ShouldProcess($SqlInstance, "Changing database $db user $user from [$Login] to [$NewLogin]")) {
                    try {
                        $oldname = $user.name
                        $user.Rename($NewLogin)
                        [pscustomobject]@{
                            ComputerName = $server.ComputerName
                            InstanceName = $server.ServiceName
                            SqlInstance  = $server.DomainInstanceName
                            Database     = $db.name
                            PreviousUser = $oldname
                            NewUser      = $NewLogin
                            Status       = "Successful"
                        }

                    } catch {
                        Write-Message -Level Warning -Message "Rolling back update to login: $Login"
                        $currentLogin.rename($Login)

                        [pscustomobject]@{
                            ComputerName = $server.ComputerName
                            InstanceName = $server.ServiceName
                            SqlInstance  = $server.DomainInstanceName
                            Database     = $db.name
                            PreviousUser = $NewLogin
                            NewUser      = $oldname
                            Status       = "Failure to rename. Rolled back change."
                        }
                        Stop-Function -Message "Failure" -ErrorRecord $_ -Target $NewLogin
                    }
                }
            }
        }
    }
}

tools\dbatools\functions\Repair-DbaDbMirror.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Repair-DbaDbMirror {
    <#
    .SYNOPSIS
        Attempts to repair a suspended or paused mirroring database.

    .DESCRIPTION
        Attempts to repair a suspended mirroring database.

        Restarts the endpoints then sets the partner to resume. See this article for more info:

        http://www.sqlservercentral.com/blogs/vivekssqlnotes/2016/09/03/how-to-resume-suspended-database-mirroring-in-sql-server-/

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function
        to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The target database.

    .PARAMETER InputObject
        Allows piping from Get-DbaDatabase.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Mirror, HA
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Repair-DbaDbMirror

    .EXAMPLE
        PS C:\> Repair-DbaDbMirror -SqlInstance sql2017 -Database pubs

        Attempts to repair the mirrored but suspended pubs database on sql2017.
        Restarts the endpoints then sets the partner to resume. Prompts for confirmation.

    .EXAMPLE
        PS C:\> Get-DbaDatabase -SqlInstance sql2017 -Database pubs | Repair-DbaDbMirror -Confirm:$false

        Attempts to repair the mirrored but suspended pubs database on sql2017.
        Restarts the endpoints then sets the partner to resume. Does not prompt for confirmation.

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'High')]
    param (
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$Database,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Database[]]$InputObject,
        [switch]$EnableException
    )
    process {
        if ((Test-Bound -ParameterName SqlInstance) -and (Test-Bound -Not -ParameterName Database)) {
            Stop-Function -Message "Database is required when SqlInstance is specified"
            return
        }
        foreach ($instance in $SqlInstance) {
            $InputObject += Get-DbaDatabase -SqlInstance $instance -SqlCredential $SqlCredential -Database $Database
        }

        foreach ($db in $InputObject) {
            try {
                Get-DbaEndpoint -SqlInstance $db.Parent | Where-Object EndpointType -eq DatabaseMirroring | Stop-DbaEndPoint
                Get-DbaEndpoint -SqlInstance $db.Parent | Where-Object EndpointType -eq DatabaseMirroring | Start-DbaEndPoint
                $db | Set-DbaDbMirror -State Resume
                if ($Pscmdlet.ShouldProcess("console", "displaying output")) {
                    $db
                }
            } catch {
                Stop-Function -Message "Failure" -ErrorRecord $_
            }
        }
    }
}

tools\dbatools\functions\Repair-DbaOrphanUser.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Repair-DbaOrphanUser {
    <#
    .SYNOPSIS
        Finds orphan users with existing login and remaps them.

    .DESCRIPTION
        An orphan user is defined by a user that does not have a matching login (Login property = "").

        If the matching login exists it must be:
        Enabled
        Not a system object
        Not locked
        Have the same name that user

        You can drop users that does not have their matching login by specifying the parameter -RemoveNotExisting.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        Specifies the database(s) to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        Specifies the database(s) to exclude from processing. Options for this list are auto-populated from the server

    .PARAMETER Users
        Specifies the list of usernames to repair.

    .PARAMETER Force
        Forces alter schema to dbo owner so users can be dropped.

    .PARAMETER RemoveNotExisting
        If this switch is enabled, all users that do not have a matching login will be dropped from the database.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Orphan
        Author: Claudio Silva (@ClaudioESSilva) | Simone Bizzotto (@niphlod)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Repair-DbaOrphanUser

    .EXAMPLE
        PS C:\> Repair-DbaOrphanUser -SqlInstance sql2005

        Finds and repairs all orphan users of all databases present on server 'sql2005'

    .EXAMPLE
        PS C:\> Repair-DbaOrphanUser -SqlInstance sqlserver2014a -SqlCredential $cred

        Finds and repair all orphan users in all databases present on server 'sqlserver2014a'. SQL credentials are used to authenticate to the server.

    .EXAMPLE
        PS C:\> Repair-DbaOrphanUser -SqlInstance sqlserver2014a -Database db1, db2

        Finds and repairs all orphan users in both db1 and db2 databases.

    .EXAMPLE
        PS C:\> Repair-DbaOrphanUser -SqlInstance sqlserver2014a -Database db1 -Users OrphanUser

        Finds and repairs user 'OrphanUser' in 'db1' database.

    .EXAMPLE
        PS C:\> Repair-DbaOrphanUser -SqlInstance sqlserver2014a -Users OrphanUser

        Finds and repairs user 'OrphanUser' on all databases

    .EXAMPLE
        PS C:\> Repair-DbaOrphanUser -SqlInstance sqlserver2014a -RemoveNotExisting

        Finds all orphan users of all databases present on server 'sqlserver2014a'. Removes all users that do not have  matching Logins.

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [parameter(ValueFromPipeline)]
        [object[]]$Users,
        [switch]$RemoveNotExisting,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {

        foreach ($instance in $SqlInstance) {

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Write-Message -Level Warning -Message "Failed to connect to: $SqlInstance."
                continue
            }

            $DatabaseCollection = $server.Databases | Where-Object IsAccessible

            if ($Database) {
                $DatabaseCollection = $DatabaseCollection | Where-Object Name -In $Database
            }
            if ($ExcludeDatabase) {
                $DatabaseCollection = $DatabaseCollection | Where-Object Name -NotIn $ExcludeDatabase
            }

            if ($DatabaseCollection.Count -gt 0) {
                foreach ($db in $DatabaseCollection) {
                    try {
                        #if SQL 2012 or higher only validate databases with ContainmentType = NONE
                        if ($server.versionMajor -gt 10) {
                            if ($db.ContainmentType -ne [Microsoft.SqlServer.Management.Smo.ContainmentType]::None) {
                                Write-Message -Level Warning -Message "Database '$db' is a contained database. Contained databases can't have orphaned users. Skipping validation."
                                Continue
                            }
                        }

                        Write-Message -Level Verbose -Message "Validating users on database '$db'."

                        if ($Users.Count -eq 0) {
                            #the third validation will remove from list sql users without login. The rule here is Sid with length higher than 16
                            $UsersToWork = $db.Users | Where-Object { $_.Login -eq "" -and ($_.ID -gt 4) -and (($_.Sid.Length -gt 16 -and $_.LoginType -in @([Microsoft.SqlServer.Management.Smo.LoginType]::SqlLogin, [Microsoft.SqlServer.Management.Smo.LoginType]::Certificate)) -eq $false) }
                        } else {
                            #the fourth validation will remove from list sql users without login. The rule here is Sid with length higher than 16
                            $UsersToWork = $db.Users | Where-Object { $_.Login -eq "" -and ($_.ID -gt 4) -and ($Users -contains $_.Name) -and (($_.Sid.Length -gt 16 -and $_.LoginType -in @([Microsoft.SqlServer.Management.Smo.LoginType]::SqlLogin, [Microsoft.SqlServer.Management.Smo.LoginType]::Certificate)) -eq $false) }
                        }

                        if ($UsersToWork.Count -gt 0) {
                            Write-Message -Level Verbose -Message "Orphan users found"
                            $UsersToRemove = @()
                            foreach ($User in $UsersToWork) {
                                $ExistLogin = $server.logins | Where-Object {
                                    $_.Isdisabled -eq $False -and
                                    $_.IsSystemObject -eq $False -and
                                    $_.IsLocked -eq $False -and
                                    $_.Name -eq $User.Name
                                }

                                if ($ExistLogin) {
                                    if ($server.versionMajor -gt 8) {
                                        $query = "ALTER USER " + $User + " WITH LOGIN = " + $User
                                    } else {
                                        $query = "exec sp_change_users_login 'update_one', '$User'"
                                    }

                                    if ($Pscmdlet.ShouldProcess($db.Name, "Mapping user '$($User.Name)'")) {
                                        $server.Databases[$db.Name].ExecuteNonQuery($query) | Out-Null
                                        Write-Message -Level Verbose -Message "User '$($User.Name)' mapped with their login."

                                        [PSCustomObject]@{
                                            ComputerName = $server.ComputerName
                                            InstanceName = $server.ServiceName
                                            SqlInstance  = $server.DomainInstanceName
                                            DatabaseName = $db.Name
                                            User         = $User.Name
                                            Status       = "Success"
                                        }
                                    }
                                } else {
                                    if ($RemoveNotExisting) {
                                        #add user to collection
                                        $UsersToRemove += $User
                                    } else {
                                        Write-Message -Level Verbose -Message "Orphan user $($User.Name) does not have matching login."
                                        [PSCustomObject]@{
                                            ComputerName = $server.ComputerName
                                            InstanceName = $server.ServiceName
                                            SqlInstance  = $server.DomainInstanceName
                                            DatabaseName = $db.Name
                                            User         = $User.Name
                                            Status       = "No matching login"
                                        }
                                    }
                                }
                            }

                            #With the collection complete invoke remove.
                            if ($RemoveNotExisting) {
                                if ($Force) {
                                    if ($Pscmdlet.ShouldProcess($db.Name, "Remove-DbaOrphanUser")) {
                                        Write-Message -Level Verbose -Message "Calling 'Remove-DbaOrphanUser' with -Force."
                                        Remove-DbaOrphanUser -SqlInstance $server -Database $db.Name -User $UsersToRemove -Force
                                    }
                                } else {
                                    if ($Pscmdlet.ShouldProcess($db.Name, "Remove-DbaOrphanUser")) {
                                        Write-Message -Level Verbose -Message "Calling 'Remove-DbaOrphanUser'."
                                        Remove-DbaOrphanUser -SqlInstance $server -Database $db.Name -User $UsersToRemove
                                    }
                                }
                            }
                        } else {
                            Write-Message -Level Verbose -Message "No orphan users found on database '$db'."
                        }
                        #reset collection
                        $UsersToWork = $null
                    } catch {
                        Stop-Function -Message $_ -Continue
                    }
                }
            } else {
                Write-Message -Level Verbose -Message "There are no databases to analyse."
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Repair-SqlOrphanUser
    }
}

tools\dbatools\functions\Repair-DbaServerName.ps1

function Repair-DbaServerName {
    <#
    .SYNOPSIS
        Renames @@SERVERNAME to match with the Windows name.

    .DESCRIPTION
        When a SQL Server's host OS is renamed, the SQL Server should be as well. This helps with Availability Groups and Kerberos.

        This command renames @@SERVERNAME to match with the Windows name. The new name is automatically determined. It does not matter if you use an alias to connect to the SQL instance.

        If the automatically determined new name matches the old name, the command will not run.

        https://www.mssqltips.com/sqlservertip/2525/steps-to-change-the-server-name-for-a-sql-server-machine/

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER AutoFix
        If this switch is enabled, the repair will be performed automatically.

    .PARAMETER Force
        If this switch is enabled, most confirmation prompts will be skipped.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .NOTES
        Tags: SPN
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Repair-DbaServerName

    .EXAMPLE
        PS C:\> Repair-DbaServerName -SqlInstance sql2014

        Checks to see if the server name is updatable and changes the name with a number of prompts.

    .EXAMPLE
        PS C:\> Repair-DbaServerName -SqlInstance sql2014 -AutoFix

        Checks to see if the server name is updatable and automatically performs the change. Replication or mirroring will be broken if necessary.

    .EXAMPLE
        PS C:\> Repair-DbaServerName -SqlInstance sql2014 -AutoFix -Force

        Checks to see if the server name is updatable and automatically performs the change, bypassing most prompts and confirmations. Replication or mirroring will be broken if necessary.

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "High")]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [switch]$AutoFix,
        [switch]$Force,
        [switch][Alias('Silent')]
        $EnableException
    )

    begin {
        if ($Force -eq $true) {
            $ConfirmPreference = "None"
        }
    }

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            if ($server.isClustered) {
                Write-Message -Level Warning -Message "$instance is a cluster. Microsoft does not support renaming clusters."
                continue
            }


            # Check to see if we can easily proceed

            $nametest = Test-DbaServerName $server -EnableException | Select-Object *
            $oldserverinstancename = $nametest.ServerName
            $SqlInstancename = $nametest.SqlInstance

            if ($nametest.RenameRequired -eq $false) {
                Stop-Function -Continue -Message "Good news! $oldserverinstancename's @@SERVERNAME does not need to be changed. If you'd like to rename it, first rename the Windows server."
            }

            if (-not $nametest.updatable) {
                Write-Message -Level Output -Message "Test-DbaServerName reports that the rename cannot proceed with a rename in this $instance's current state."

                foreach ($nametesterror in $nametest.Blockers) {
                    if ($nametesterror -like '*replication*') {

                        if (-not $AutoFix) {
                            Stop-Function -Message "Cannot proceed because some databases are involved in replication. You can run exec sp_dropdistributor @no_checks = 1 but that may be pretty dangerous. Alternatively, you can run -AutoFix to automatically fix this issue. AutoFix will also break all database mirrors."
                            return
                        } else {
                            if ($Pscmdlet.ShouldProcess("console", "Prompt will appear for confirmation to break replication.")) {
                                $title = "You have chosen to AutoFix the blocker: replication."
                                $message = "We can run sp_dropdistributor which will pretty much destroy replication on this server. Do you wish to continue? (Y/N)"
                                $yes = New-Object System.Management.Automation.Host.ChoiceDescription "&Yes", "Will continue"
                                $no = New-Object System.Management.Automation.Host.ChoiceDescription "&No", "Will exit"
                                $options = [System.Management.Automation.Host.ChoiceDescription[]]($yes, $no)
                                $result = $host.ui.PromptForChoice($title, $message, $options, 1)

                                if ($result -eq 1) {
                                    Stop-Function -Message "Failure" -Target $server -ErrorRecord $_ -Continue
                                } else {
                                    Write-Message -Level Output -Message "`nPerforming sp_dropdistributor @no_checks = 1."
                                    $sql = "sp_dropdistributor @no_checks = 1"
                                    Write-Message -Level Debug -Message $sql
                                    try {
                                        $null = $server.Query($sql)
                                    } catch {
                                        Stop-Function -Message "Failure" -Target $server -ErrorRecord $_ -Continue
                                    }
                                }
                            }
                        }
                    } elseif ($Error -like '*mirror*') {
                        if ($AutoFix -eq $false) {
                            Stop-Function -Message "Cannot proceed because some databases are being mirrored. Stop mirroring to proceed. Alternatively, you can run -AutoFix to automatically fix this issue. AutoFix will also stop replication." -Continue
                        } else {
                            if ($Pscmdlet.ShouldProcess("console", "Prompt will appear for confirmation to break replication.")) {
                                $title = "You have chosen to AutoFix the blocker: mirroring."
                                $message = "We can run sp_dropdistributor which will pretty much destroy replication on this server. Do you wish to continue? (Y/N)"
                                $yes = New-Object System.Management.Automation.Host.ChoiceDescription "&Yes", "Will continue"
                                $no = New-Object System.Management.Automation.Host.ChoiceDescription "&No", "Will exit"
                                $options = [System.Management.Automation.Host.ChoiceDescription[]]($yes, $no)
                                $result = $host.ui.PromptForChoice($title, $message, $options, 1)

                                if ($result -eq 1) {
                                    Write-Message -Level Output -Message "Okay, moving on."
                                } else {
                                    Write-Message -Level Verbose -Message "Removing Mirroring"

                                    foreach ($database in $server.Databases) {
                                        if ($database.IsMirroringEnabled) {
                                            $dbname = $database.name

                                            try {
                                                Write-Message -Level Verbose -Message "Breaking mirror for $dbname."
                                                $database.ChangeMirroringState([Microsoft.SqlServer.Management.Smo.MirroringOption]::Off)
                                                $database.Alter()
                                                $database.Refresh()
                                            } catch {
                                                Stop-Function -Message "Failure" -Target $server -ErrorRecord $_
                                                return
                                                #throw "Could not break mirror for $dbname. Skipping."
                                            }
                                        }
                                    }
                                }
                            }
                        }
                    }
                }
            }
            # ^ That's embarrassing

            $instancename = $server.InstanceName

            if (-not $instancename) {
                $instancename = "MSSQLSERVER"
            }

            try {
                $allsqlservices = Get-Service -ComputerName $instance.ComputerName -ErrorAction SilentlyContinue | Where-Object { $_.DisplayName -like "SQL*$instancename*" -and $_.Status -eq "Running" }
            } catch {
                Write-Message -Level Warning -Message "Can't contact $instance using Get-Service. This means the script will not be able to automatically restart SQL services."
            }

            if ($nametest.Warnings.length -gt 0) {
                $reportingservice = Get-Service -ComputerName $instance.ComputerName -DisplayName "SQL Server Reporting Services ($instancename)" -ErrorAction SilentlyContinue

                if ($reportingservice.Status -eq "Running") {
                    if ($Pscmdlet.ShouldProcess($server.name, "Reporting Services is running for this instance. Would you like to automatically stop this service?")) {
                        $reportingservice | Stop-Service
                        Write-Message -Level Warning -Message "You must reconfigure Reporting Services using Reporting Services Configuration Manager or PowerShell once the server has been successfully renamed."
                    }
                }
            }

            if ($Pscmdlet.ShouldProcess($server.name, "Performing sp_dropserver to remove the old server name, $oldserverinstancename, then sp_addserver to add $SqlInstancename")) {
                $sql = "sp_dropserver '$oldserverinstancename'"
                Write-Message -Level Debug -Message $sql
                try {
                    $null = $server.Query($sql)
                } catch {
                    Stop-Function -Message "Failure" -Target $server -ErrorRecord $_
                    return
                }

                $sql = "sp_addserver '$SqlInstancename', local"
                Write-Message -Level Debug -Message $sql

                try {
                    $null = $server.Query($sql)
                } catch {
                    Stop-Function -Message "Failure" -Target $server -ErrorRecord $_
                    return
                }
                $renamed = $true
            }

            if ($null -eq $allsqlservices) {
                Write-Message -Level Warning -Message "Could not contact $($instance.ComputerName) using Get-Service. You must manually restart the SQL Server instance."
                $needsrestart = $true
            } else {
                if ($Pscmdlet.ShouldProcess($instance.ComputerName, "Rename complete! The SQL Service must be restarted to commit the changes. Would you like to restart the $instancename instance now?")) {
                    try {
                        Write-Message -Level Verbose -Message "Stopping SQL Services for the $instancename instance"
                        $allsqlservices | Stop-Service -Force -WarningAction SilentlyContinue # because it reports the wrong name
                        Write-Message -Level Verbose -Message "Starting SQL Services for the $instancename instance."
                        $allsqlservices | Where-Object { $_.DisplayName -notlike "*reporting*" } | Start-Service -WarningAction SilentlyContinue # because it reports the wrong name
                    } catch {
                        Stop-Function -Message "Failure" -Target $server -ErrorRecord $_ -Continue
                    }
                }
            }

            if ($renamed -eq $true) {
                Write-Message -Level Verbose -Message "$instance successfully renamed from $oldserverinstancename to $SqlInstancename."
                Test-DbaServerName -SqlInstance $server
            }

            if ($needsrestart -eq $true) {
                Write-Message -Level Warning -Message "SQL Service restart for $SqlInstancename still required."
            }
        }
    }
}

tools\dbatools\functions\Reset-DbaAdmin.ps1

function Reset-DbaAdmin {
    <#
    .SYNOPSIS
        This function allows administrators to regain access to SQL Servers in the event that passwords or access was lost.

        Supports SQL Server 2005 and above. Windows administrator access is required.

    .DESCRIPTION
        This function allows administrators to regain access to local or remote SQL Servers by either resetting the sa password, adding the sysadmin role to existing login, or adding a new login (SQL or Windows) and granting it sysadmin privileges.

        This is accomplished by stopping the SQL services or SQL Clustered Resource Group, then restarting SQL via the command-line using the /mReset-DbaAdmin parameter which starts the server in Single-User mode and only allows this script to connect.

        Once the service is restarted, the following tasks are performed:
        - Login is added if it doesn't exist
        - If login is a Windows User, an attempt is made to ensure it exists
        - If login is a SQL Login, password policy will be set to OFF when creating the login, and SQL Server authentication will be set to Mixed Mode.
        - Login will be enabled and unlocked
        - Login will be added to sysadmin role

        If failures occur at any point, a best attempt is made to restart the SQL Server.

        In order to make this script as portable as possible, System.Data.SqlClient and Get-WmiObject are used (as opposed to requiring the Failover Cluster Admin tools or SMO).

        If using this function against a remote SQL Server, ensure WinRM is configured and accessible. If this is not possible, run the script locally.

        Tested on Windows XP, 7, 8.1, Server 2012 and Windows Server Technical Preview 2.
        Tested on SQL Server 2005 SP4 through 2016 CTP2.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. SQL Server must be 2005 and above, and can be a clustered or stand-alone instance.

    .PARAMETER SqlCredential
        Instead of using Login and SecurePassword, you can just pass in a credential object.

    .PARAMETER Login
        By default, the Login parameter is "sa" but any other SQL or Windows account can be specified. If a login does not currently exist, it will be added.

        When adding a Windows login to remote servers, ensure the SQL Server can add the login (ie, don't add WORKSTATION\Admin to remoteserver\instance. Domain users and Groups are valid input.

    .PARAMETER SecurePassword
        By default, if a SQL Login is detected, you will be prompted for a password. Use this to securely bypass the prompt.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER Force
        If this switch is enabled, the Login(s) will be dropped and recreated on Destination. Logins that own Agent jobs cannot be dropped at this time.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: WSMan
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        Requires: Admin access to server (not SQL Services),
        Remoting must be enabled and accessible if $instance is not local

    .LINK
        https://dbatools.io/Reset-DbaAdmin

    .EXAMPLE
        PS C:\> Reset-DbaAdmin -SqlInstance sqlcluster -SqlCredential sqladmin

        Prompts for password, then resets the "sqladmin" account password on sqlcluster.

    .EXAMPLE
        PS C:\> Reset-DbaAdmin -SqlInstance sqlserver\sqlexpress -Login ad\administrator -Confirm:$false

        Adds the domain account "ad\administrator" as a sysadmin to the SQL instance.

        If the account already exists, it will be added to the sysadmin role.

        Does not prompt for a password since it is not a SQL login. Does not prompt for confirmation since -Confirm is set to $false.

    .EXAMPLE
        PS C:\> Reset-DbaAdmin -SqlInstance sqlserver\sqlexpress -Login sqladmin -Force

        Skips restart confirmation, prompts for password, then adds a SQL Login "sqladmin" with sysadmin privileges.
        If the account already exists, it will be added to the sysadmin role and the password will be reset.

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "High")]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSAvoidUsingWMICmdlet", "", Justification = "Using Get-WmiObject for client backwards compatibilty")]
    param (
        [Parameter(Mandatory)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter]$SqlInstance,
        [pscredential]$SqlCredential,
        [string]$Login = "sa",
        [SecureString]$SecurePassword,
        [switch]$Force,
        [switch]$EnableException
    )

    begin {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Reset-SqlAdmin

        #region Utility functions
        function ConvertTo-PlainText {
            <#
                .SYNOPSIS
                    Internal function.
             #>
            [CmdletBinding()]
            param (
                [Parameter(Mandatory)]
                [Security.SecureString]$Password
            )

            $marshal = [Runtime.InteropServices.Marshal]
            $plaintext = $marshal::PtrToStringAuto($marshal::SecureStringToBSTR($Password))
            return $plaintext
        }

        function Invoke-ResetSqlCmd {
            <#
                .SYNOPSIS
                    Internal function. Executes a SQL statement against specified computer, and uses "Reset-DbaAdmin" as the Application Name.
            #>
            [OutputType([System.Boolean])]
            [CmdletBinding()]
            param (
                [Parameter(Mandatory)]
                [Alias("ServerInstance", "SqlServer")]
                [DbaInstanceParameter]$instance,
                [string]$sql,
                [switch]$EnableException
            )
            try {
                $connstring = "Data Source=$instance;Integrated Security=True;Connect Timeout=20;Application Name=Reset-DbaAdmin"
                $conn = New-Object System.Data.SqlClient.SqlConnection $connstring
                $conn.Open()
                $cmd = New-Object system.data.sqlclient.sqlcommand($null, $conn)
                $cmd.CommandText = $sql
                $cmd.ExecuteNonQuery() | Out-Null
                $cmd.Dispose()
                $conn.Close()
                $conn.Dispose()
                $true
            } catch {
                Stop-Function -Message "Failure" -ErrorRecord $_
            }
        }
        #endregion Utility functions
        if ($Force) {
            $ConfirmPreference = "none"
        }

        if ($SqlCredential) {
            $Login = $SqlCredential.UserName
            $SecurePassword = $SqlCredential.Password
        }
    }

    process {
        foreach ($instance in $sqlinstance) {
            $stepcounter = 0
            $baseaddress = $instance.ComputerName
            # Get hostname

            if ($baseaddress.IsLocalHost) {
                $ipaddr = "."
                $hostname = $env:COMPUTERNAME
                $baseaddress = $env:COMPUTERNAME
            }

            # If server is not local, get IP address and NetBios name in case CNAME records were referenced in the SQL hostname
            if ($baseaddress -ne $env:COMPUTERNAME) {
                # Test for WinRM #Test-WinRM neh
                winrm id -r:$baseaddress 2>$null | Out-Null
                if ($LastExitCode -ne 0) {
                    Stop-Function -Continue -Message "Remote PowerShell access not enabled on on $instance or access denied. Quitting."
                }

                # Test Connection first using Test-Connection which requires ICMP access then failback to tcp if pings are blocked
                Write-Message -Level Verbose -Message "Testing connection to $baseaddress"
                $testconnect = Test-Connection -ComputerName $baseaddress -Count 1 -Quiet

                if ($testconnect -eq $false) {
                    Write-Message -Level Verbose -Message "First attempt using ICMP failed. Trying to connect using sockets. This may take up to 20 seconds."
                    $tcp = New-Object System.Net.Sockets.TcpClient
                    try {
                        $tcp.Connect($hostname, 135)
                        $tcp.Close()
                        $tcp.Dispose()
                    } catch {
                        Stop-Function -Continue -ErrorRecord $_ -Message "Can't connect to $baseaddress either via ping or tcp (WMI port 135)"
                    }
                }
                Write-Message -Level Verbose -Message "Resolving IP address."
                try {
                    $hostentry = [System.Net.Dns]::GetHostEntry($baseaddress)
                    $ipaddr = ($hostentry.AddressList | Where-Object {
                            $_ -notlike '169.*'
                        } | Select-Object -First 1).IPAddressToString
                } catch {
                    Stop-Function -Continue -ErrorRecord $_ -Message "Could not resolve SqlServer IP or NetBIOS name"
                }

                Write-Message -Level Verbose -Message "Resolving NetBIOS name."
                try {
                    # this is required otherwise, the ip is returned
                    $hostname = (Get-WmiObject -Class Win32_NetworkAdapterConfiguration -Filter IPEnabled=TRUE -ComputerName $ipaddr -ErrorAction Stop).PSComputerName
                    if ($null -eq $hostname) {
                        $hostname = (nbtstat -A $ipaddr | Where-Object {
                                $_ -match '\<00\>  UNIQUE'
                            } | ForEach-Object {
                                $_.SubString(4, 14)
                            }).Trim()
                    }
                } catch {
                    Stop-Function -Continue -ErrorRecord $_ -Message "Could not access remote WMI object. Check permissions and firewall."
                }
            }

            # Setup remote session if server is not local
            if (-not $instance.IsLocalHost) {
                try {
                    $session = New-PSSession -ComputerName $hostname -ErrorAction Stop
                } catch {
                    Stop-Function -Continue -ErrorRecord $_ -Message "Can't access $hostname using PSSession. Check your firewall settings and ensure Remoting is enabled or run the script locally."
                }
            }

            Write-Message -Level Verbose -Message "Detecting login type."
            # Is login a Windows login? If so, does it exist?
            if ($login -match "\\") {
                Write-Message -Level Verbose -Message "Windows login detected. Checking to ensure account is valid."
                $windowslogin = $true
                try {
                    if ($hostname -eq $env:COMPUTERNAME) {
                        $account = New-Object System.Security.Principal.NTAccount($args)
                        #Variable $sid marked as unused by PSScriptAnalyzer replace with $null to catch output
                        $null = $account.Translate([System.Security.Principal.SecurityIdentifier])
                    } else {
                        Invoke-Command -ErrorAction Stop -Session $session -ArgumentList $login -ScriptBlock {
                            $account = New-Object System.Security.Principal.NTAccount($args)
                            #Variable $sid marked as unused by PSScriptAnalyzer replace with $null to catch output
                            $null = $account.Translate([System.Security.Principal.SecurityIdentifier])
                        }
                    }
                } catch {
                    Write-Message -Level Warning -Message "Cannot resolve Windows User or Group $login. Trying anyway."
                }
            }

            # If it's not a Windows login, it's a SQL login, so it needs a password.
            if (-not $windowslogin -and -not $SecurePassword) {
                Write-Message -Level Verbose -Message "SQL login detected"
                do {
                    $Password = Read-Host -AsSecureString "Please enter a new password for $login"
                } while ($Password.Length -eq 0)
            }

            If ($SecurePassword) {
                $Password = $SecurePassword
            }

            # Get instance and service display name, then get services
            $instancename = $null
            $instancename = $instance.InstanceName
            if (-not $instancename) {
                $instancename = "MSSQLSERVER"
            }
            $displayName = "SQL Server ($instancename)"

            try {
                if ($hostname -eq $env:COMPUTERNAME) {
                    $instanceservices = Get-Service -ErrorAction Stop | Where-Object {
                        $_.DisplayName -like "*($instancename)*" -and $_.Status -eq "Running"
                    }
                    $sqlservice = Get-Service -ErrorAction Stop | Where-Object DisplayName -eq "SQL Server ($instancename)"
                } else {
                    $instanceservices = Get-Service -ComputerName $ipaddr -ErrorAction Stop | Where-Object {
                        $_.DisplayName -like "*($instancename)*" -and $_.Status -eq "Running"
                    }
                    $sqlservice = Get-Service -ComputerName $ipaddr -ErrorAction Stop | Where-Object DisplayName -eq "SQL Server ($instancename)"
                }
            } catch {
                Stop-Function -Message "Cannot connect to WMI on $hostname or SQL Service does not exist. Check permissions, firewall and SQL Server running status." -ErrorRecord $_ -Target $instance
                return
            }

            if (-not $instanceservices) {
                Stop-Function -Message "Couldn't find SQL Server instance. Check the spelling, ensure the service is running and try again." -Target $instance
                return
            }

            Write-Message -Level Verbose -Message "Attempting to stop SQL Services."

            # Check to see if service is clustered. Clusters don't support -m (since the cluster service
            # itself connects immediately) or -f, so they are handled differently.
            try {
                $checkcluster = Get-Service -ComputerName $ipaddr -ErrorAction Stop | Where-Object {
                    $_.Name -eq "ClusSvc" -and $_.Status -eq "Running"
                }
            } catch {
                Stop-Function -Message "Can't check services." -Target $instance -ErrorRecord $_
                return
            }

            if ($null -ne $checkcluster) {
                $clusterResource = Get-DbaCmObject -ClassName "MSCluster_Resource" -Namespace "root\mscluster" -ComputerName $hostname |
                    Where-Object {
                    $_.Name.StartsWith("SQL Server") -and $_.OwnerGroup -eq "SQL Server ($instancename)"
                }
            }


            if ($pscmdlet.ShouldProcess($baseaddress, "Stop $instance to restart in single-user mode")) {
                Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Stopping $instance to restart in single-user mode"
                # Take SQL Server offline so that it can be started in single-user mode
                if ($clusterResource.count -gt 0) {
                    $isclustered = $true
                    try {
                        $clusterResource | Where-Object {
                            $_.Name -eq "SQL Server"
                        } | ForEach-Object {
                            $_.TakeOffline(60)
                        }
                    } catch {
                        $clusterResource | Where-Object {
                            $_.Name -eq "SQL Server"
                        } | ForEach-Object {
                            $_.BringOnline(60)
                        }
                        $clusterResource | Where-Object {
                            $_.Name -ne "SQL Server"
                        } | ForEach-Object {
                            $_.BringOnline(60)
                        }
                        Stop-Function -Message "Could not stop the SQL Service. Restarted SQL Service and quit." -ErrorRecord $_ -Target $instance
                        return
                    }
                } else {
                    try {
                        Stop-Service -InputObject $sqlservice -Force -ErrorAction Stop
                        Write-Message -Level Verbose -Message "Successfully stopped SQL service."
                    } catch {
                        Start-Service -InputObject $instanceservices -ErrorAction Stop
                        Stop-Function -Message "Could not stop the SQL Service. Restarted SQL service and quit." -ErrorRecord $_ -Target $instance
                        return
                    }
                }
            }

            # /mReset-DbaAdmin Starts an instance of SQL Server in single-user mode and only allows this script to connect.
            if ($pscmdlet.ShouldProcess($baseaddress, "Starting $instance in single-user mode")) {
                Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Starting $instance in single-user mode"
                try {
                    if ($instance.IsLocalHost) {
                        $netstart = net start ""$displayname"" /mReset-DbaAdmin 2>&1
                        if ("$netstart" -notmatch "success") {
                            Stop-Function -Message "Restart failure" -Continue
                        }
                    } else {
                        $netstart = Invoke-Command -ErrorAction Stop -Session $session -ArgumentList $displayname -ScriptBlock {
                            net start ""$args"" /mReset-DbaAdmin
                        } 2>&1
                        foreach ($line in $netstart) {
                            if ($line.length -gt 0) {
                                Write-Message -Level Verbose -Message $line
                            }
                        }
                    }
                } catch {
                    Stop-Service -InputObject $sqlservice -Force -ErrorAction SilentlyContinue

                    if ($isclustered) {
                        $clusterResource | Where-Object Name -eq "SQL Server" | ForEach-Object {
                            $_.BringOnline(60)
                        }
                        $clusterResource | Where-Object Name -ne "SQL Server" | ForEach-Object {
                            $_.BringOnline(60)
                        }
                    } else {
                        Start-Service -InputObject $instanceservices -ErrorAction SilentlyContinue
                    }
                    Stop-Function -Message "Couldn't execute net start command. Restarted services and quit." -ErrorRecord $_
                    return
                }
            }

            if ($pscmdlet.ShouldProcess($baseaddress, "Testing $instance to ensure it's back up")) {
                Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Testing $instance to ensure it's back up"
                try {
                    $null = Invoke-ResetSqlCmd -instance $instance -Sql "SELECT 1" -EnableException
                } catch {
                    try {
                        Start-Sleep 3
                        $null = Invoke-ResetSqlCmd -instance $instance -Sql "SELECT 1" -EnableException
                    } catch {
                        Stop-Service Input-Object $sqlservice -Force -ErrorAction SilentlyContinue
                        if ($isclustered) {
                            $clusterResource | Where-Object {
                                $_.Name -eq "SQL Server"
                            } | ForEach-Object {
                                $_.BringOnline(60)
                            }
                            $clusterResource | Where-Object {
                                $_.Name -ne "SQL Server"
                            } | ForEach-Object {
                                $_.BringOnline(60)
                            }
                        } else {
                            Start-Service -InputObject $instanceservices -ErrorAction SilentlyContinue
                        }
                        Stop-Function -Message "Could not stop the SQL Service. Restarted SQL Service and quit." -ErrorRecord $_
                    }
                }
            }

            # Get login. If it doesn't exist, create it.
            if ($pscmdlet.ShouldProcess($instance, "Adding login $login if it doesn't exist")) {
                Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Adding login $login if it doesn't exist"
                if ($windowslogin) {
                    $sql = "IF NOT EXISTS (SELECT name FROM master.sys.server_principals WHERE name = '$login')
                    BEGIN CREATE LOGIN [$login] FROM WINDOWS END"
                    if (-not (Invoke-ResetSqlCmd -instance $instance -Sql $sql)) {
                        Write-Message -Level Warning -Message "Couldn't create Windows login."
                    }

                } elseif ($login -ne "sa") {
                    # Create new sql user
                    $sql = "IF NOT EXISTS (SELECT name FROM master.sys.server_principals WHERE name = '$login')
                    BEGIN CREATE LOGIN [$login] WITH PASSWORD = '$(ConvertTo-PlainText $Password)', CHECK_POLICY = OFF, CHECK_EXPIRATION = OFF END"
                    if (-not (Invoke-ResetSqlCmd -instance $instance -Sql $sql)) {
                        Write-Message -Level Warning -Message "Couldn't create SQL login."
                    }
                }
            }


            # If $login is a SQL Login, Mixed mode authentication is required.
            if ($windowslogin -ne $true) {
                if ($pscmdlet.ShouldProcess($instance, "Enabling mixed mode authentication for $login and ensuring account is unlocked")) {
                    Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Enabling mixed mode authentication for $login and ensuring account is unlocked"
                    $sql = "EXEC xp_instance_regwrite N'HKEY_LOCAL_MACHINE', N'Software\Microsoft\MSSQLServer\MSSQLServer', N'LoginMode', REG_DWORD, 2"
                    if (-not (Invoke-ResetSqlCmd -instance $instance -Sql $sql)) {
                        Write-Message -Level Warning -Message "Couldn't set to Mixed Mode."
                    }

                    $sql = "ALTER LOGIN [$login] WITH CHECK_POLICY = OFF
                    ALTER LOGIN [$login] WITH PASSWORD = '$(ConvertTo-PlainText $Password)' UNLOCK"
                    if (-not (Invoke-ResetSqlCmd -instance $instance -Sql $sql)) {
                        Write-Message -Level Warning -Message "Couldn't unlock account."
                    }
                }
            }

            if ($pscmdlet.ShouldProcess($instance, "Enabling $login")) {
                Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Ensuring login is enabled"
                $sql = "ALTER LOGIN [$login] ENABLE"
                if (-not (Invoke-ResetSqlCmd -instance $instance -Sql $sql)) {
                    Write-Message -Level Warning -Message "Couldn't enable login."
                }
            }

            if ($login -ne "sa") {
                if ($pscmdlet.ShouldProcess($instance, "Ensuring $login exists within sysadmin role")) {
                    Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Ensuring $login exists within sysadmin role"
                    $sql = "EXEC sp_addsrvrolemember '$login', 'sysadmin'"
                    if (-not (Invoke-ResetSqlCmd -instance $instance -Sql $sql)) {
                        Write-Message -Level Warning -Message "Couldn't add to sysadmin role."
                    }
                }
            }

            if ($pscmdlet.ShouldProcess($instance, "Finished with login tasks. Restarting")) {
                Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Finished with login tasks. Restarting."
                try {
                    Stop-Service -InputObject $sqlservice -Force -ErrorAction Stop
                    if ($isclustered -eq $true) {
                        $clusterResource | Where-Object Name -eq "SQL Server" | ForEach-Object {
                            $_.BringOnline(60)
                        }
                        $clusterResource | Where-Object Name -ne "SQL Server" | ForEach-Object {
                            $_.BringOnline(60)
                        }
                    } else {
                        Start-Service -InputObject $instanceservices -ErrorAction Stop
                    }
                } catch {
                    Stop-Function -Message "Failure" -ErrorRecord $_
                }
            }

            if ($pscmdlet.ShouldProcess($instance, "Logging in to get account information")) {
                Write-ProgressHelper -StepNumber ($stepCounter++) -Message "Logging in to get account information"
                if ($securePassword) {
                    $cred = New-Object System.Management.Automation.PSCredential ($Login, $securePassword)
                    Get-DbaLogin -SqlInstance $instance -SqlCredential $cred -Login $Login
                } elseif ($SqlCredential) {
                    Get-DbaLogin -SqlInstance $instance -SqlCredential $SqlCredential -Login $Login
                } else {
                    try {
                        Get-DbaLogin -SqlInstance $instance -SqlCredential $SqlCredential -Login $Login -EnableException
                    } catch {
                        Stop-Function -Message "Password not supplied, tried logging in with Integrated authentication and it failed. Either way, $Login should work now on $instance." -Continue
                    }
                }
            }

        }
    }
    end {
        Write-Message -Level Verbose -Message "Script complete!"
    }
}

tools\dbatools\functions\Resolve-DbaNetworkName.ps1

function Resolve-DbaNetworkName {
    <#
    .SYNOPSIS
        Returns information about the network connection of the target computer including NetBIOS name, IP Address, domain name and fully qualified domain name (FQDN).

    .DESCRIPTION
        Retrieves the IPAddress, ComputerName from one computer.
        The object can be used to take action against its name or IPAddress.

        First ICMP is used to test the connection, and get the connected IPAddress.

        Multiple protocols (e.g. WMI, CIM, etc) are attempted before giving up.

        Important: Remember that FQDN doesn't always match "ComputerName dot Domain" as AD intends.
        There are network setup (google "disjoint domain") where AD and DNS do not match.
        "Full computer name" (as reported by sysdm.cpl) is the only match between the two,
        and it matches the "DNSHostName"  property of the computer object stored in AD.
        This means that the notation of FQDN that matches "ComputerName dot Domain" is incorrect
        in those scenarios.
        In other words, the "suffix" of the FQDN CAN be different from the AD Domain.

        This cmdlet has been providing good results since its inception but for lack of useful
        names some doubts may arise.
        Let this clear the doubts:
        - InputName: whatever has been passed in
        - ComputerName: hostname only
        - IPAddress: IP Address
        - DNSHostName: hostname only, coming strictly from DNS (as reported from the calling computer)
        - DNSDomain: domain only, coming strictly from DNS (as reported from the calling computer)
        - Domain: domain only, coming strictly from AD (i.e. the domain the ComputerName is joined to)
        - DNSHostEntry: Fully name as returned by DNS [System.Net.Dns]::GetHostEntry
        - FQDN: "legacy" notation of ComputerName "dot" Domain (coming from AD)
        - FullComputerName: Full name as configured from within the Computer (i.e. the only secure match between AD and DNS)

        So, if you need to use something, go with FullComputerName, always, as it is the most correct in every scenario.

    .PARAMETER ComputerName
        The target SQL Server instance or instances.
        This can be the name of a computer, a SMO object, an IP address or a SQL Instance.

    .PARAMETER Credential
        Credential object used to connect to the SQL Server as a different user

    .PARAMETER Turbo
        Resolves without accessing the server itself. Faster but may be less accurate because it relies on DNS only,
        so it may fail spectacularly for disjoin-domain setups. Also, everyone has its own DNS (i.e. results may vary
        changing the computer where the function runs)

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Network, Resolve
        Author: Klaas Vandenberghe (@PowerDBAKlaas) | Simone Bizzotto (@niphold)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Resolve-DbaNetworkName

    .EXAMPLE
        PS C:\> Resolve-DbaNetworkName -ComputerName ServerA

        Returns a custom object displaying InputName, ComputerName, IPAddress, DNSHostName, DNSDomain, Domain, DNSHostEntry, FQDN, DNSHostEntry for ServerA

    .EXAMPLE
        PS C:\> Resolve-DbaNetworkName -SqlInstance sql2016\sqlexpress

        Returns a custom object displaying InputName, ComputerName, IPAddress, DNSHostName, DNSDomain, Domain, DNSHostEntry, FQDN, DNSHostEntry  for the SQL instance sql2016\sqlexpress

    .EXAMPLE
        PS C:\> Resolve-DbaNetworkName -SqlInstance sql2016\sqlexpress, sql2014

        Returns a custom object displaying InputName, ComputerName, IPAddress, DNSHostName, DNSDomain, Domain, DNSHostEntry, FQDN, DNSHostEntry  for the SQL instance sql2016\sqlexpress and sql2014

    .EXAMPLE
        PS C:\> Get-DbaCmsRegServer -SqlInstance sql2014 | Resolve-DbaNetworkName

        Returns a custom object displaying InputName, ComputerName, IPAddress, DNSHostName, Domain, FQDN for all SQL Servers returned by Get-DbaCmsRegServer

    #>
    [CmdletBinding()]
    param (
        [parameter(ValueFromPipeline)]
        [Alias('cn', 'host', 'ServerInstance', 'Server', 'SqlInstance')]
        [DbaInstanceParameter[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [Alias('FastParrot')]
        [switch]$Turbo,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        if (-not (Test-Windows -NoWarn)) {
            Write-Message -Level Verbose -Message "Non-Windows client detected. Turbo (DNS resolution only) set to $true"
            $Turbo = $true
        }

        foreach ($Computer in $ComputerName) {
            $conn = $ipaddress = $null

            $OGComputer = $Computer

            if ($Computer.IsLocalhost) {
                $Computer = $env:COMPUTERNAME
            } else {
                $Computer = $Computer.ComputerName
            }

            if ($Turbo) {
                try {
                    Write-Message -Level VeryVerbose -Message "Resolving $Computer using .NET.Dns GetHostEntry"
                    $ipaddress = ([System.Net.Dns]::GetHostEntry($Computer)).AddressList[0].IPAddressToString
                    Write-Message -Level VeryVerbose -Message "Resolving $ipaddress using .NET.Dns GetHostByAddress"
                    $fqdn = [System.Net.Dns]::GetHostByAddress($ipaddress).HostName
                } catch {
                    try {
                        Write-Message -Level VeryVerbose -Message "Resolving $Computer and IP using .NET.Dns GetHostEntry"
                        $resolved = [System.Net.Dns]::GetHostEntry($Computer)
                        $ipaddress = $resolved.AddressList[0].IPAddressToString
                        $fqdn = $resolved.HostName
                    } catch {
                        Stop-Function -Message "DNS name not found" -Continue -ErrorRecord $_
                    }
                }

                if ($fqdn -notmatch "\.") {
                    if ($computer.ComputerName -match "\.") {
                        $dnsdomain = $computer.ComputerName.Substring($computer.ComputerName.IndexOf(".") + 1)
                        $fqdn = "$resolved.$dnsdomain"
                    } else {
                        $dnsdomain = "$env:USERDNSDOMAIN".ToLower()
                        if ($dnsdomain -match "\.") {
                            $fqdn = "$fqdn.$dnsdomain"
                        }
                    }
                }

                $hostname = $fqdn.Split(".")[0]

                [PSCustomObject]@{
                    InputName        = $OGComputer
                    ComputerName     = $hostname.ToUpper()
                    IPAddress        = $ipaddress
                    DNSHostname      = $hostname
                    DNSDomain        = $fqdn.Replace("$hostname.", "")
                    Domain           = $fqdn.Replace("$hostname.", "")
                    DNSHostEntry     = $fqdn
                    FQDN             = $fqdn
                    FullComputerName = $fqdn
                }

            } else {


                try {
                    $ipaddress = ((Test-Connection -ComputerName $Computer -Count 1 -ErrorAction Stop).Ipv4Address).IPAddressToString
                } catch {
                    try {
                        if ($env:USERDNSDOMAIN) {
                            $ipaddress = ((Test-Connection -ComputerName "$Computer.$env:USERDNSDOMAIN" -Count 1 -ErrorAction SilentlyContinue).Ipv4Address).IPAddressToString
                            if ($ipaddress) {
                                $Computer = "$Computer.$env:USERDNSDOMAIN"
                                Write-Message -Level VeryVerbose -Message "IP Address from $Computer is $ipaddress"
                            } else {
                                Write-Message -Level VeryVerbose -Message "No IP Address returned from $Computer"
                                Write-Message -Level VeryVerbose -Message "Using .NET.Dns to resolve IP Address"
                                Resolve-DbaNetworkName -ComputerName $Computer -Turbo
                                continue
                            }
                        }
                    } catch {
                        $Computer = $OGComputer
                        $ipaddress = ([System.Net.Dns]::GetHostEntry($Computer)).AddressList[0].IPAddressToString
                    }
                }

                if ($ipaddress) {
                    Write-Message -Level VeryVerbose -Message "IP Address from $Computer is $ipaddress"
                } else {
                    Write-Message -Level VeryVerbose -Message "No IP Address returned from $Computer"
                    Write-Message -Level VeryVerbose -Message "Using .NET.Dns to resolve IP Address"
                    return (Resolve-DbaNetworkName -ComputerName $Computer -Turbo)
                }

                if ($PSVersionTable.PSVersion.Major -gt 2) {
                    Write-Message -Level System -Message "Your PowerShell Version is $($PSVersionTable.PSVersion.Major)"
                    try {
                        try {
                            # if an alias (CNAME) is passed we should try to connect to the A name via CIM or WinRM
                            $ComputerNameIP = ([System.Net.Dns]::GetHostEntry($Computer)).AddressList[0].IPAddressToString
                            $RemoteComputer = [System.Net.Dns]::GetHostByAddress($ComputerNameIP).HostName
                        } catch {
                            $RemoteComputer = $Computer
                        }
                        Write-Message -Level VeryVerbose -Message "Getting computer information from $RemoteComputer"
                        $ScBlock = {
                            $IPGProps = [System.Net.NetworkInformation.IPGlobalProperties]::GetIPGlobalProperties()
                            return [pscustomobject]@{
                                'DNSDomain' = $IPGProps.DomainName
                            }
                        }
                        if (Test-Bound "Credential") {
                            $conn = Get-DbaCmObject -ClassName win32_ComputerSystem -ComputerName $RemoteComputer -Credential $Credential -EnableException
                            $DNSSuffix = Invoke-Command2 -ComputerName $RemoteComputer -ScriptBlock $ScBlock -Credential $Credential -ErrorAction Stop
                        } else {
                            $conn = Get-DbaCmObject -ClassName win32_ComputerSystem -ComputerName $RemoteComputer -EnableException
                            $DNSSuffix = Invoke-Command2 -ComputerName $RemoteComputer -ScriptBlock $ScBlock -ErrorAction Stop
                        }
                    } catch {
                        Write-Message -Level Verbose -Message "Unable to get computer information from $Computer"
                    }

                    if (!$conn) {
                        Write-Message -Level Verbose -Message "No WMI/CIM from $Computer. Getting HostName via .NET.Dns"
                        try {
                            $fqdn = ([System.Net.Dns]::GetHostEntry($Computer)).HostName
                            $hostname = $fqdn.Split(".")[0]
                            $suffix = $fqdn.Replace("$hostname.", "")
                            if ($hostname -eq $fqdn) {
                                $suffix = ""
                            }
                            $conn = [PSCustomObject]@{
                                Name        = $Computer
                                DNSHostname = $hostname
                                Domain      = $suffix
                            }
                            $DNSSuffix = [PSCustomObject]@{
                                DNSDomain = $suffix
                            }
                        } catch {
                            Stop-Function -Message "No .NET.Dns information from $Computer" -ErrorRecord $_ -Continue
                        }
                    }
                }
                if ($DNSSuffix.DNSDomain.Length -eq 0) {
                    $FullComputerName = $conn.DNSHostname
                } else {
                    $FullComputerName = $conn.DNSHostname + "." + $DNSSuffix.DNSDomain
                }
                try {
                    Write-Message -Level VeryVerbose -Message "Resolving $FullComputerName using .NET.Dns GetHostEntry"
                    $hostentry = ([System.Net.Dns]::GetHostEntry($FullComputerName)).HostName
                } catch {
                    Stop-Function -Message ".NET.Dns GetHostEntry failed for $FullComputerName" -ErrorRecord $_
                }

                $fqdn = "$($conn.DNSHostname).$($conn.Domain)"
                if ($fqdn -eq ".") {
                    Write-Message -Level VeryVerbose -Message "No full FQDN found. Setting to null"
                    $fqdn = $null
                }
                if ($FullComputerName -eq ".") {
                    Write-Message -Level VeryVerbose -Message "No DNS FQDN found. Setting to null"
                    $FullComputerName = $null
                }

                if ($FullComputerName -ne "." -and $FullComputerName -notmatch "\." -and $conn.Domain -match "\.") {
                    $d = $conn.Domain
                    $FullComputerName = "$FullComputerName.$d"
                }

                [PSCustomObject]@{
                    InputName        = $OGComputer
                    ComputerName     = $conn.Name
                    IPAddress        = $ipaddress
                    DNSHostName      = $conn.DNSHostname
                    DNSDomain        = $DNSSuffix.DNSDomain
                    Domain           = $conn.Domain
                    DNSHostEntry     = $hostentry
                    FQDN             = $fqdn.TrimEnd(".")
                    FullComputerName = $FullComputerName
                }
            }
        }
    }
}

tools\dbatools\functions\Restart-DbaService.ps1

function Restart-DbaService {
    <#
    .SYNOPSIS
        Restarts SQL Server services on a computer.

    .DESCRIPTION
        Restarts the SQL Server related services on one or more computers. Will follow SQL Server service dependencies.

        Requires Local Admin rights on destination computer(s).

    .PARAMETER ComputerName
        The target SQL Server instance or instances.

    .PARAMETER InstanceName
        Only affects services that belong to the specific instances.

    .PARAMETER Credential
        Credential object used to connect to the computer as a different user.

    .PARAMETER Type
        Use -Type to collect only services of the desired SqlServiceType.
        Can be one of the following: "Agent","Browser","Engine","FullText","SSAS","SSIS","SSRS"

    .PARAMETER Timeout
        How long to wait for the start/stop request completion before moving on. Specify 0 to wait indefinitely.

    .PARAMETER InputObject
        A collection of services from Get-DbaService

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER WhatIf
        Shows what would happen if the cmdlet runs. The cmdlet is not run.

    .PARAMETER Confirm
        Prompts you for confirmation before running the cmdlet.

    .PARAMETER Force
        Will stop dependent SQL Server agents when stopping Engine services.

    .NOTES
        Tags: Service, Instance, Restart
        Author: Kirill Kravtsov (@nvarscar)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        Requires Local Admin rights on destination computer(s).

    .LINK
        https://dbatools.io/Restart-DbaService

    .EXAMPLE
        PS C:\> Restart-DbaService -ComputerName sqlserver2014a

        Restarts the SQL Server related services on computer sqlserver2014a.

    .EXAMPLE
        PS C:\> 'sql1','sql2','sql3'| Get-DbaService | Restart-DbaService

        Gets the SQL Server related services on computers sql1, sql2 and sql3 and restarts them.

    .EXAMPLE
        PS C:\> Restart-DbaService -ComputerName sql1,sql2 -Instance MSSQLSERVER

        Restarts the SQL Server services related to the default instance MSSQLSERVER on computers sql1 and sql2.

    .EXAMPLE
        PS C:\> Restart-DbaService -ComputerName $MyServers -Type SSRS

        Restarts the SQL Server related services of type "SSRS" (Reporting Services) on computers in the variable MyServers.

    .EXAMPLE
        PS C:\> Restart-DbaService -ComputerName sql1 -Type Engine -Force

        Restarts SQL Server database engine services on sql1 forcing dependent SQL Server Agent services to restart as well.

    #>
    [CmdletBinding(DefaultParameterSetName = "Server", SupportsShouldProcess)]
    param (
        [Parameter(ParameterSetName = "Server", Position = 1)]
        [Alias("cn", "host", "Server")]
        [DbaInstanceParameter[]]$ComputerName = $env:COMPUTERNAME,
        [Alias("Instance")]
        [string[]]$InstanceName,
        [ValidateSet("Agent", "Browser", "Engine", "FullText", "SSAS", "SSIS", "SSRS")]
        [string[]]$Type,
        [parameter(ValueFromPipeline, Mandatory, ParameterSetName = "Service")]
        [Alias("ServiceCollection")]
        [object[]]$InputObject,
        [int]$Timeout = 60,
        [PSCredential]$Credential,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {
        $processArray = @()
        if ($PsCmdlet.ParameterSetName -eq "Server") {
            $serviceParams = @{ ComputerName = $ComputerName }
            if ($InstanceName) { $serviceParams.InstanceName = $InstanceName }
            if ($Type) { $serviceParams.Type = $Type }
            if ($Credential) { $serviceParams.Credential = $Credential }
            if ($EnableException) { $serviceParams.Silent = $EnableException }
            $InputObject = Get-DbaService @serviceParams
        }
    }
    process {
        #Get all the objects from the pipeline before proceeding
        $processArray += $InputObject
    }
    end {
        $processArray = [array]($processArray | Where-Object { (!$InstanceName -or $_.InstanceName -in $InstanceName) -and (!$Type -or $_.ServiceType -in $Type) })
        foreach ($service in $processArray) {
            if ($Force -and $service.ServiceType -eq 'Engine' -and !($processArray | Where-Object { $_.ServiceType -eq 'Agent' -and $_.InstanceName -eq $service.InstanceName -and $_.ComputerName -eq $service.ComputerName })) {
                Write-Message -Level Verbose -Message "Adding Agent service to the list for service $($service.ServiceName) on $($service.ComputerName), since -Force has been specified"
                #Construct parameters to call Get-DbaService
                $serviceParams = @{
                    ComputerName = $service.ComputerName
                    InstanceName = $service.InstanceName
                    Type         = 'Agent'
                }
                if ($Credential) { $serviceParams.Credential = $Credential }
                if ($EnableException) { $serviceParams.Silent = $EnableException }
                $processArray += @(Get-DbaService @serviceParams)
            }
        }
        if ($processArray) {
            if ($PSCmdlet.ShouldProcess("$ProcessArray", "Restarting Service")) {
                $services = Update-ServiceStatus -InputObject $processArray -Action 'stop' -Timeout $Timeout -EnableException $EnableException
                foreach ($service in ($services | Where-Object { $_.Status -eq 'Failed'})) {
                    $service
                }
                $services = $services | Where-Object { $_.Status -eq 'Successful'}
                if ($services) {
                    Update-ServiceStatus -InputObject $services -Action 'restart' -Timeout $Timeout -EnableException $EnableException
                }
            }
        } else {
            Stop-Function -EnableException $EnableException -Message "No SQL Server services found with current parameters."
        }

        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Restart-DbaSqlService
    }
}

tools\dbatools\functions\Restore-DbaBackupFromDirectory.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Restore-DbaBackupFromDirectory {
    <#
    .SYNOPSIS
        Please use `Get-ChildItem | Restore-DbaDatabase` instead. This command is no longer supported.

    .DESCRIPTION
        Please use `Get-ChildItem | Restore-DbaDatabase` instead. This command is no longer supported.

    .PARAMETER SqlInstance
        The SQL Server instance to which you will be restoring the database.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Path
        Specifies the full path to the directory that contains the database backups. The SQL Server service must have read access to this path.

    .PARAMETER ReuseSourceFolderStructure
        If this switch is enabled, the folder structure used on the instance where the backup was made will be recreated. By default, the database files will be restored to the default data and log directories for the instance you're restoring onto.

    .PARAMETER NoRecovery
        If this switch is enabled, the database is left in the No Recovery state to enable further backups to be added.

    .PARAMETER Force
        If this switch is enabled, any existing database matching the name of a database being restored will be overwritten.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .NOTES
        Tags: DisasterRecovery, Backup, Restore
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Restore-SqlBackupFromDirectory

    .EXAMPLE
        PS C:\> Restore-SqlBackupFromDirectory -SqlInstance sqlcluster -Path \\fileserver\share\sqlbackups\SQLSERVER2014A

        All user databases contained within \\fileserver\share\sqlbackups\SQLSERVERA will be restored to sqlcluster, down the most recent full/differential/logs.

    #>
    #Requires -Version 3.0
    [CmdletBinding()]
    param (
        [parameter(Mandatory)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter]$SqlInstance,
        [parameter(Mandatory)]
        [string]$Path,
        [switch]$NoRecovery,
        [Alias("ReuseFolderStructure")]
        [switch]$ReuseSourceFolderStructure,
        [PSCredential]$SqlCredential,
        [switch]$Force
    )

    Write-Message -Level Warning -Message "This command is no longer supported. Please use Get-ChildItem | Restore-DbaDatabase instead"
}

tools\dbatools\functions\Restore-DbaDatabase.ps1

function Restore-DbaDatabase {
    <#
    .SYNOPSIS
        Restores a SQL Server Database from a set of backup files

    .DESCRIPTION
        Upon being passed a list of potential backups files this command will scan the files, select those that contain SQL Server
        backup sets. It will then filter those files down to a set that can perform the requested restore, checking that we have a
        full restore chain to the point in time requested by the caller.

        The function defaults to working on a remote instance. This means that all paths passed in must be relative to the remote instance.
        XpDirTree will be used to perform the file scans

        Various means can be used to pass in a list of files to be considered. The default is to non recursively scan the folder
        passed in.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Allows you to login to servers using SQL Logins as opposed to Windows Auth/Integrated/Trusted.

    .PARAMETER Path
        Path to SQL Server backup files.

        Paths passed in as strings will be scanned using the desired method, default is a non recursive folder scan
        Accepts multiple paths separated by ','

        Or it can consist of FileInfo objects, such as the output of Get-ChildItem or Get-Item. This allows you to work with
        your own file structures as needed

    .PARAMETER DatabaseName
        Name to restore the database under.
        Only works with a single database restore. If multiple database are found in the provided paths then we will exit

    .PARAMETER DestinationDataDirectory
        Path to restore the SQL Server backups to on the target instance.
        If only this parameter is specified, then all database files (data and log) will be restored to this location

    .PARAMETER DestinationLogDirectory
        Path to restore the database log files to.
        This parameter can only be specified alongside DestinationDataDirectory.

    .PARAMETER DestinationFileStreamDirectory
        Path to restore FileStream data to
        This parameter can only be specified alongside DestinationDataDirectory

    .PARAMETER RestoreTime
        Specify a DateTime object to which you want the database restored to. Default is to the latest point  available in the specified backups

    .PARAMETER NoRecovery
        Indicates if the databases should be recovered after last restore. Default is to recover

    .PARAMETER WithReplace
        Switch indicated is the restore is allowed to replace an existing database.

    .PARAMETER XpDirTree
        Switch that indicated file scanning should be performed by the SQL Server instance using xp_dirtree
        This will scan recursively from the passed in path
        You must have sysadmin role membership on the instance for this to work.

    .PARAMETER OutputScriptOnly
        Switch indicates that ONLY T-SQL scripts should be generated, no restore takes place

    .PARAMETER VerifyOnly
        Switch indicate that restore should be verified

    .PARAMETER MaintenanceSolutionBackup
        Switch to indicate the backup files are in a folder structure as created by Ola Hallengreen's maintenance scripts.
        This switch enables a faster check for suitable backups. Other options require all files to be read first to ensure we have an anchoring full backup. Because we can rely on specific locations for backups performed with OlaHallengren's backup solution, we can rely on file locations.

    .PARAMETER FileMapping
        A hashtable that can be used to move specific files to a location.
        `$FileMapping = @{'DataFile1'='c:\restoredfiles\Datafile1.mdf';'DataFile3'='d:\DataFile3.mdf'}`
        And files not specified in the mapping will be restored to their original location
        This Parameter is exclusive with DestinationDataDirectory

    .PARAMETER IgnoreLogBackup
        This switch tells the function to ignore transaction log backups. The process will restore to the latest full or differential backup point only

    .PARAMETER UseDestinationDefaultDirectories
        Switch that tells the restore to use the default Data and Log locations on the target server. If they don't exist, the function will try to create them

    .PARAMETER ReuseSourceFolderStructure
        By default, databases will be migrated to the destination Sql Server's default data and log directories. You can override this by specifying -ReuseSourceFolderStructure.
        The same structure on the SOURCE will be kept exactly, so consider this if you're migrating between different versions and use part of Microsoft's default Sql structure (MSSql12.INSTANCE, etc)

        *Note, to reuse destination folder structure, specify -WithReplace

    .PARAMETER DestinationFilePrefix
        This value will be prefixed to ALL restored files (log and data). This is just a simple string prefix. If you want to perform more complex rename operations then please use the FileMapping parameter

        This will apply to all file move options, except for FileMapping

    .PARAMETER DestinationFileSuffix
        This value will be suffixed to ALL restored files (log and data). This is just a simple string suffix. If you want to perform more complex rename operations then please use the FileMapping parameter

        This will apply to all file move options, except for FileMapping

    .PARAMETER RestoredDatabaseNamePrefix
        A string which will be prefixed to the start of the restore Database's Name
        Useful if restoring a copy to the same sql server for testing.

    .PARAMETER TrustDbBackupHistory
        This switch can be used when piping the output of Get-DbaBackupHistory or Backup-DbaDatabase into this command.
        It allows the user to say that they trust that the output from those commands is correct, and skips the file header read portion of the process. This means a faster process, but at the risk of not knowing till halfway through the restore that something is wrong with a file.

    .PARAMETER MaxTransferSize
        Parameter to set the unit of transfer. Values must be a multiple by 64kb

    .PARAMETER Blocksize
        Specifies the block size to use. Must be one of 0.5kb,1kb,2kb,4kb,8kb,16kb,32kb or 64kb
        Can be specified in bytes
        Refer to https://msdn.microsoft.com/en-us/library/ms178615.aspx for more detail

    .PARAMETER BufferCount
        Number of I/O buffers to use to perform the operation.
        Refer to https://msdn.microsoft.com/en-us/library/ms178615.aspx for more detail

    .PARAMETER XpNoRecurse
        If specified, prevents the XpDirTree process from recursing (its default behaviour)

    .PARAMETER DirectoryRecurse
        If specified the specified directory will be recursed into

    .PARAMETER Continue
        If specified we will to attempt to recover more transaction log backups onto  database(s) in Recovering or Standby states

    .PARAMETER StandbyDirectory
        If a directory is specified the database(s) will be restored into a standby state, with the standby file placed into this directory (which must exist, and be writable by the target Sql Server instance)

    .PARAMETER AzureCredential
        The name of the SQL Server credential to be used if restoring from an Azure hosted backup using Storage Access Keys
        If a backup path beginning http is passed in and this parameter is not specified then if a credential with a name matching the URL

    .PARAMETER ReplaceDbNameInFile
        If switch set and occurrence of the original database's name in a data or log file will be replace with the name specified in the DatabaseName parameter

    .PARAMETER Recover
        If set will perform recovery on the indicated database

    .PARAMETER AllowContinue
        By default, Restore-DbaDatabase will stop restoring any databases if it comes across an error.
        Use this switch to enable it to restore all databases without issues.

    .PARAMETER GetBackupInformation
        Passing a string value into this parameter will cause a global variable to be created holding the output of Get-DbaBackupInformation

    .PARAMETER SelectBackupInformation
        Passing a string value into this parameter will cause a global variable to be created holding the output of Select-DbaBackupInformation

    .PARAMETER FormatBackupInformation
        Passing a string value into this parameter will cause a global variable to be created holding the output of Format-DbaBackupInformation

    .PARAMETER TestBackupInformation
        Passing a string value into this parameter will cause a global variable to be created holding the output of Test-DbaBackupInformation

    .PARAMETER StopAfterGetBackupInformation
        Switch which will cause the function to exit after returning GetBackupInformation

    .PARAMETER StopAfterSelectBackupInformation
        Switch which will cause the function to exit after returning SelectBackupInformation

    .PARAMETER StopAfterFormatBackupInformation
        Switch which will cause the function to exit after returning FormatBackupInformation

    .PARAMETER StopAfterTestBackupInformation
        Switch which will cause the function to exit after returning TestBackupInformation

    .PARAMETER StatementTimeOut
        Timeout in minutes. Defaults to infinity (restores can take a while.)

    .PARAMETER KeepCDC
        Indicates whether CDC information should be restored as part of the database

    .PARAMETER PageRestore
        Passes in an object from Get-DbaSuspectPages containing suspect pages from a single database.
        Setting this Parameter will cause an Online Page restore if the target Instance is Enterprise Edition, or offline if not.
        This will involve taking a tail log backup, so you must check your restore chain once it has completed

    .PARAMETER PageRestoreTailFolder
        This parameter passes in a location for the tail log backup required for page level restore

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER Confirm
        Prompts to confirm certain actions

    .PARAMETER WhatIf
        Shows what would happen if the command would execute, but does not actually perform the command

    .NOTES
        Tags: DisasterRecovery, Backup, Restore
        Author: Stuart Moore (@napalmgram), stuart-moore.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Restore-DbaDatabase

    .EXAMPLE
        PS C:\> Restore-DbaDatabase -SqlInstance server1\instance1 -Path \\server2\backups

        Scans all the backup files in \\server2\backups, filters them and restores the database to server1\instance1

    .EXAMPLE
        PS C:\> Restore-DbaDatabase -SqlInstance server1\instance1 -Path \\server2\backups -MaintenanceSolutionBackup -DestinationDataDirectory c:\restores

        Scans all the backup files in \\server2\backups$ stored in an Ola Hallengren style folder structure,
        filters them and restores the database to the c:\restores folder on server1\instance1

    .EXAMPLE
        PS C:\> Get-ChildItem c:\SQLbackups1\, \\server\sqlbackups2 | Restore-DbaDatabase -SqlInstance server1\instance1

        Takes the provided files from multiple directories and restores them on  server1\instance1

    .EXAMPLE
        PS C:\> $RestoreTime = Get-Date('11:19 23/12/2016')
        PS C:\> Restore-DbaDatabase -SqlInstance server1\instance1 -Path \\server2\backups -MaintenanceSolutionBackup -DestinationDataDirectory c:\restores -RestoreTime $RestoreTime

        Scans all the backup files in \\server2\backups stored in an Ola Hallengren style folder structure,
        filters them and restores the database to the c:\restores folder on server1\instance1 up to 11:19 23/12/2016

    .EXAMPLE
        PS C:\> $result = Restore-DbaDatabase -SqlInstance server1\instance1 -Path \\server2\backups -DestinationDataDirectory c:\restores -OutputScriptOnly
        PS C:\> $result | Select-Object -ExpandProperty Tsql | Out-File -Filepath c:\scripts\restore.sql

        Scans all the backup files in \\server2\backups stored in an Ola Hallengren style folder structure,
        filters them and generate the T-SQL Scripts to restore the database to the latest point in time,
        and then stores the output in a file for later retrieval

    .EXAMPLE
        PS C:\> Restore-DbaDatabase -SqlInstance server1\instance1 -Path c:\backups -DestinationDataDirectory c:\DataFiles -DestinationLogDirectory c:\LogFile

        Scans all the files in c:\backups and then restores them onto the SQL Server Instance server1\instance1, placing data files
        c:\DataFiles and all the log files into c:\LogFiles

    .EXAMPLE
        PS C:\> Restore-DbaDatabase -SqlInstance server1\instance1 -Path http://demo.blob.core.windows.net/backups/dbbackup.bak -AzureCredential MyAzureCredential

        Will restore the backup held at  http://demo.blob.core.windows.net/backups/dbbackup.bak to server1\instance1. The connection to Azure will be made using the
        credential MyAzureCredential held on instance Server1\instance1

    .EXAMPLE
        PS C:\> Restore-DbaDatabase -SqlInstance server1\instance1 -Path http://demo.blob.core.windows.net/backups/dbbackup.bak

        Will attempt to restore the backups from http://demo.blob.core.windows.net/backups/dbbackup.bak if a SAS credential with the name http://demo.blob.core.windows.net/backups exists on server1\instance1

    .EXAMPLE
        PS C:\> $File = Get-ChildItem c:\backups, \\server1\backups -recurse
        PS C:\> $File | Restore-DbaDatabase -SqlInstance Server1\Instance -UseDestinationDefaultDirectories

        This will take all of the files found under the folders c:\backups and \\server1\backups, and pipeline them into
        Restore-DbaDatabase. Restore-DbaDatabase will then scan all of the files, and restore all of the databases included
        to the latest point in time covered by their backups. All data and log files will be moved to the default SQL Server
        folder for those file types as defined on the target instance.

    .EXAMPLE
        PS C:\> $files = Get-ChildItem C:\dbatools\db1
        PS C:\> $files | Restore-DbaDatabase -SqlInstance server\instance1 `
        >> -DestinationFilePrefix prefix -DatabaseName Restored  `
        >> -RestoreTime (get-date "14:58:30 22/05/2017") `
        >> -NoRecovery -WithReplace -StandbyDirectory C:\dbatools\standby
        >>
        PS C:\> #It's in standby so we can peek at it
        PS C:\> Invoke-DbaQuery -SQLInstance server\instance1 -Query "select top 1 * from Restored.dbo.steps order by dt desc"
        PS C:\> #Not quite there so let's roll on a bit:
        PS C:\> $files | Restore-DbaDatabase -SqlInstance server\instance1 `
        >> -DestinationFilePrefix prefix -DatabaseName Restored `
        >> -continue -WithReplace -RestoreTime (get-date "15:09:30 22/05/2017") `
        >> -StandbyDirectory C:\dbatools\standby
        >>
        PS C:\> Invoke-DbaQuery -SQLInstance server\instance1 -Query "select top 1 * from restored.dbo.steps order by dt desc"
        PS C:\> Restore-DbaDatabase -SqlInstance server\instance1 -DestinationFilePrefix prefix -DatabaseName Restored -Continue -WithReplace

        In this example we step through the backup files held in c:\dbatools\db1 folder.
        First we restore the database to a point in time in standby mode. This means we can check some details in the databases
        We then roll it on a further 9 minutes to perform some more checks
        And finally we continue by rolling it all the way forward to the latest point in the backup.
        At each step, only the log files needed to roll the database forward are restored.

    .EXAMPLE
        PS C:\> Restore-DbaDatabase -SqlInstance server\instance1 -Path c:\backups -DatabaseName example1 -NoRecovery
        PS C:\> Restore-DbaDatabase -SqlInstance server\instance1 -Recover -DatabaseName example1

        In this example we restore example1 database with no recovery, and then the second call is to set the database to recovery.

    .EXAMPLE
        PS C:\> Get-DbaBackupHistory - SqlInstance server\instance1 -Database ProdFinance -Last | Restore-DbaDatabase -PageRestore
        PS C:\> $SuspectPage -PageRestoreTailFolder c:\temp -TrustDbBackupHistory -AllowContinues

        Gets a list of Suspect Pages using Get-DbaSuspectPage. The uses Get-DbaBackupHistory and Restore-DbaDatabase to perform a restore of the suspect pages and bring them up to date
        If server\instance1 is Enterprise edition this will be done online, if not it will be performed offline
        AllowContinue is required to make sure we cope with existing files

    .EXAMPLE
        PS C:\> $BackupHistory = Get-DbaBackupInformation -SqlInstance sql2005 -Path \\backups\sql2000\ProdDb
        PS C:\> $BackupHistory | Restore-DbaDatabase -SqlInstance sql2000 -TrustDbBackupHistory

        Due to SQL Server 2000 not returning all the backup headers we cannot restore directly. As this is an issues with the SQL engine all we can offer is the following workaround
        This will use a SQL Server instance > 2000 to read the headers, and then pass them in to Restore-DbaDatabase as a BackupHistory object.

    .EXAMPLE
        PS C:\> Restore-DbaDatabase -SqlInstance server1\instance1 -Path "C:\Temp\devops_prod_full.bak" -DatabaseName "DevOps_DEV" -ReplaceDbNameInFile
        PS C:\> Rename-DbaDatabase -SqlInstance server1\instance1 -Database "DevOps_DEV" -LogicalName "<DBN>_<FT>"

        This will restore the database from the "C:\Temp\devops_prod_full.bak" file, with the new name "DevOps_DEV" and store the different physical files with the new name. It will use the system default configured data and log locations.
        After the restore the logical names of the database files will be renamed with the "DevOps_DEV_ROWS" for MDF/NDF and "DevOps_DEV_LOG" for LDF

    .EXAMPLE
        PS C:\> $FileStructure = @{
        >> 'database_data' = 'C:\Data\database_data.mdf'
        >> 'database_log' = 'C:\Log\database_log.ldf'
        >> }
        >>
        PS C:\> Restore-DbaDatabase -SqlInstance server1 -Path \\ServerName\ShareName\File -DatabaseName database -FileMapping $FileStructure

        Restores 'database' to 'server1' and moves the files to new locations. The format for the $FileStructure HashTable is the file logical name as the Key, and the new location as the Value.

#>
    [CmdletBinding(SupportsShouldProcess, DefaultParameterSetName = "Restore")]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSAvoidUsingPlainTextForPassword", "AzureCredential", Justification = "For Parameter AzureCredential")]
    param (
        [parameter(Mandatory)][Alias("ServerInstance", "SqlServer")][DbaInstanceParameter]$SqlInstance,
        [PSCredential]$SqlCredential,
        [parameter(Mandatory, ValueFromPipeline, ParameterSetName = "Restore")][parameter(Mandatory, ValueFromPipeline, ParameterSetName = "RestorePage")][object[]]$Path,
        [parameter(ValueFromPipeline)][Alias("Name")][object[]]$DatabaseName,
        [parameter(ParameterSetName = "Restore")][String]$DestinationDataDirectory,
        [parameter(ParameterSetName = "Restore")][String]$DestinationLogDirectory,
        [parameter(ParameterSetName = "Restore")][String]$DestinationFileStreamDirectory,
        [parameter(ParameterSetName = "Restore")][DateTime]$RestoreTime = (Get-Date).AddYears(1),
        [parameter(ParameterSetName = "Restore")][switch]$NoRecovery,
        [parameter(ParameterSetName = "Restore")][switch]$WithReplace,
        [parameter(ParameterSetName = "Restore")][Switch]$XpDirTree,
        [switch]$OutputScriptOnly,
        [parameter(ParameterSetName = "Restore")][switch]$VerifyOnly,
        [parameter(ParameterSetName = "Restore")][switch]$MaintenanceSolutionBackup,
        [parameter(ParameterSetName = "Restore")][hashtable]$FileMapping,
        [parameter(ParameterSetName = "Restore")][switch]$IgnoreLogBackup,
        [parameter(ParameterSetName = "Restore")][switch]$UseDestinationDefaultDirectories,
        [parameter(ParameterSetName = "Restore")][switch]$ReuseSourceFolderStructure,
        [parameter(ParameterSetName = "Restore")][string]$DestinationFilePrefix = '',
        [parameter(ParameterSetName = "Restore")][string]$RestoredDatabaseNamePrefix,
        [parameter(ParameterSetName = "Restore")][parameter(ParameterSetName = "RestorePage")][switch]$TrustDbBackupHistory,
        [parameter(ParameterSetName = "Restore")][parameter(ParameterSetName = "RestorePage")][int]$MaxTransferSize,
        [parameter(ParameterSetName = "Restore")][parameter(ParameterSetName = "RestorePage")][int]$BlockSize,
        [parameter(ParameterSetName = "Restore")][parameter(ParameterSetName = "RestorePage")][int]$BufferCount,
        [parameter(ParameterSetName = "Restore")][switch]$DirectoryRecurse,
        [switch]$EnableException,
        [parameter(ParameterSetName = "Restore")][string]$StandbyDirectory,
        [parameter(ParameterSetName = "Restore")][switch]$Continue,
        [string]$AzureCredential,
        [parameter(ParameterSetName = "Restore")][switch]$ReplaceDbNameInFile,
        [parameter(ParameterSetName = "Restore")][string]$DestinationFileSuffix,
        [parameter(ParameterSetName = "Recovery")][switch]$Recover,
        [parameter(ParameterSetName = "Restore")][switch]$KeepCDC,
        [switch]$AllowContinue,
        [string]$GetBackupInformation,
        [switch]$StopAfterGetBackupInformation,
        [string]$SelectBackupInformation,
        [switch]$StopAfterSelectBackupInformation,
        [string]$FormatBackupInformation,
        [switch]$StopAfterFormatBackupInformation,
        [string]$TestBackupInformation,
        [switch]$StopAfterTestBackupInformation,
        [parameter(Mandatory, ParameterSetName = "RestorePage")][object]$PageRestore,
        [parameter(Mandatory, ParameterSetName = "RestorePage")][string]$PageRestoreTailFolder,
        [int]$StatementTimeout = 0
    )
    begin {
        Write-Message -Level InternalComment -Message "Starting"
        Write-Message -Level Debug -Message "Parameters bound: $($PSBoundParameters.Keys -join ", ")"

        #region Validation
        try {
            $RestoreInstance = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential
        } catch {
            Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            return
        }
        if ($PSCmdlet.ParameterSetName -eq "Restore") {
            $UseDestinationDefaultDirectories = $true
            $paramCount = 0

            if (!(Test-Bound "AllowContinue") -and $true -ne $AllowContinue) {
                $AllowContinue = $false
            }
            if (Test-Bound "FileMapping") {
                $paramCount += 1
            }
            if (Test-Bound "ReuseSourceFolderStructure") {
                $paramCount += 1
            }
            if (Test-Bound "DestinationDataDirectory") {
                $paramCount += 1
            }
            if ($paramCount -gt 1) {
                Stop-Function -Category InvalidArgument -Message "You've specified incompatible Location parameters. Please only specify one of FileMapping, ReuseSourceFolderStructure or DestinationDataDirectory"
                return
            }
            if (($ReplaceDbNameInFile) -and !(Test-Bound "DatabaseName")) {
                Stop-Function -Category InvalidArgument -Message "To use ReplaceDbNameInFile you must specify DatabaseName"
                return
            }

            if ((Test-Bound "DestinationLogDirectory") -and (Test-Bound "ReuseSourceFolderStructure")) {
                Stop-Function -Category InvalidArgument -Message "The parameters DestinationLogDirectory and UseDestinationDefaultDirectories are mutually exclusive"
                return
            }
            if ((Test-Bound "DestinationLogDirectory") -and -not (Test-Bound "DestinationDataDirectory")) {
                Stop-Function -Category InvalidArgument -Message "The parameter DestinationLogDirectory can only be specified together with DestinationDataDirectory"
                return
            }
            if ((Test-Bound "DestinationFileStreamDirectory") -and (Test-Bound "ReuseSourceFolderStructure")) {
                Stop-Function -Category InvalidArgument -Message "The parameters DestinationFileStreamDirectory and UseDestinationDefaultDirectories are mutually exclusive"
                return
            }
            if ((Test-Bound "DestinationFileStreamDirectory") -and -not (Test-Bound "DestinationDataDirectory")) {
                Stop-Function -Category InvalidArgument -Message "The parameter DestinationFileStreamDirectory can only be specified together with DestinationDataDirectory"
                return
            }
            if (($null -ne $FileMapping) -or $ReuseSourceFolderStructure -or ($DestinationDataDirectory -ne '')) {
                $UseDestinationDefaultDirectories = $false
            }
            if (($MaxTransferSize % 64kb) -ne 0 -or $MaxTransferSize -gt 4mb) {
                Stop-Function -Category InvalidArgument -Message "MaxTransferSize value must be a multiple of 64kb and no greater than 4MB"
                return
            }
            if ($BlockSize) {
                if ($BlockSize -notin (0.5kb, 1kb, 2kb, 4kb, 8kb, 16kb, 32kb, 64kb)) {
                    Stop-Function -Category InvalidArgument -Message "Block size must be one of 0.5kb,1kb,2kb,4kb,8kb,16kb,32kb,64kb"
                    return
                }
            }
            if ('' -ne $StandbyDirectory) {
                if (!(Test-DbaPath -Path $StandbyDirectory -SqlInstance $RestoreInstance)) {
                    Stop-Function -Message "$SqlServer cannot see the specified Standby Directory $StandbyDirectory" -Target $SqlInstance
                    return
                }
            }
            if ($KeepCDC -and ($NoRecovery -or ('' -ne $StandbyDirectory))) {
                Stop-Function -Category InvalidArgument -Message "KeepCDC cannot be specified with Norecovery or Standby as it needs recovery to work"
                return
            }
            if ($Continue) {
                Write-Message -Message "Called with continue, so assume we have an existing db in norecovery"
                $ContinuePoints = Get-RestoreContinuableDatabase -SqlInstance $RestoreInstance
                $LastRestoreType = Get-DbaDbRestoreHistory -SqlInstance $RestoreInstance -Last
            }
            if (!($PSBoundParameters.ContainsKey("DataBasename"))) {
                $PipeDatabaseName = $true
            }
        }

        if ($StatementTimeout -eq 0) {
            Write-Message -Level Verbose -Message "Changing statement timeout to infinity"
        } else {
            Write-Message -Level Verbose -Message "Changing statement timeout to ($StatementTimeout) minutes"
        }
        $RestoreInstance.ConnectionContext.StatementTimeout = ($StatementTimeout * 60)
        #endregion Validation

        if ($UseDestinationDefaultDirectories) {
            $DefaultPath = (Get-DbaDefaultPath -SqlInstance $RestoreInstance)
            $DestinationDataDirectory = $DefaultPath.Data
            $DestinationLogDirectory = $DefaultPath.Log
        }

        $BackupHistory = @()
    }
    process {
        if (Test-FunctionInterrupt) {
            return
        }
        if ($RestoreInstance.VersionMajor -eq 8 -and $true -ne $TrustDbBackupHistory) {
            foreach ($file in $Path) {
                $bh = Get-DbaBackupInformation -SqlInstance $RestoreInstance -Path $file
                $bound = $PSBoundParameters
                $bound['TrustDbBackupHistory'] = $true
                $bound['Path'] = $bh
                Restore-Dbadatabase @bound
            }
            break
        }
        if ($PSCmdlet.ParameterSetName -like "Restore*") {
            if ($PipeDatabaseName -eq $true) {
                $DatabaseName = ''
            }
            Write-Message -message "ParameterSet  = Restore" -Level Verbose
            if ($TrustDbBackupHistory -or $path[0].GetType().ToString() -eq 'Sqlcollaborative.Dbatools.Database.BackupHistory') {
                foreach ($f in $path) {
                    Write-Message -Level Verbose -Message "Trust Database Backup History Set"
                    if ("BackupPath" -notin $f.PSobject.Properties.name) {
                        Write-Message -Level Verbose -Message "adding BackupPath - $($_.FullName)"
                        $f = $f | Select-Object *, @{
                            Name = "BackupPath"; Expression = {
                                $_.FullName
                            }
                        }
                    }
                    if ("DatabaseName" -notin $f.PSobject.Properties.Name) {
                        $f = $f | Select-Object *, @{
                            Name = "DatabaseName"; Expression = {
                                $_.Database
                            }
                        }
                    }
                    if ("Database" -notin $f.PSobject.Properties.Name) {
                        $f = $f | Select-Object *, @{
                            Name = "Database"; Expression = {
                                $_.DatabaseName
                            }
                        }
                    }
                    if ("BackupSetGUID" -notin $f.PSobject.Properties.Name) {
                        $f = $f | Select-Object *, @{
                            Name = "BackupSetGUID"; Expression = {
                                $_.BackupSetID
                            }
                        }
                    }

                    if ($f.BackupPath -like 'http*') {
                        if ('' -ne $AzureCredential) {
                            Write-Message -Message "At least one Azure backup passed in with a credential, assume correct" -Level Verbose
                            Write-Message -Message "Storage Account Identity access means striped backups cannot be restore"
                        } else {
                            $f.BackupPath -match 'https://.*/.*/'
                            if (Get-DbaCredential -SqlInstance $RestoreInstance -name $matches[0].trim('/') ) {
                                Write-Message -Message "We have a SAS credential to use with $($f.BackupPath)" -Level Verbose
                            } else {
                                Stop-Function -Message "A URL to a backup has been passed in, but no credential can be found to access it"
                                return
                            }
                        }
                    }
                    $BackupHistory += $F | Select-Object *, @{
                        Name = "ServerName"; Expression = {
                            $_.SqlInstance
                        }
                    }, @{
                        Name = "BackupStartDate"; Expression = {
                            $_.Start -as [DateTime]
                        }
                    }
                }
            } else {
                $files = @()
                foreach ($f in $Path) {
                    if ($f -is [System.IO.FileSystemInfo]) {
                        $files += $f.FullName
                    } else {
                        $files += $f
                    }
                }
                Write-Message -Level Verbose -Message "Unverified input, full scans - $($files -join ';')"
                if ($BackupHistory.GetType().ToString() -eq 'Sqlcollaborative.Dbatools.Database.BackupHistory') {
                    $BackupHistory = @($BackupHistory)
                }
                $BackupHistory += Get-DbaBackupInformation -SqlInstance $RestoreInstance -SqlCredential $SqlCredential -Path $files -DirectoryRecurse:$DirectoryRecurse -MaintenanceSolution:$MaintenanceSolutionBackup -IgnoreLogBackup:$IgnoreLogBackup -AzureCredential $AzureCredential
            }
            if ($PSCmdlet.ParameterSetName -eq "RestorePage") {
                if (-not (Test-DbaPath -SqlInstance $RestoreInstance -Path $PageRestoreTailFolder)) {
                    Stop-Function -Message "Instance $RestoreInstance cannot read $PageRestoreTailFolder, cannot proceed" -Target $PageRestoreTailFolder
                    return
                }
                $WithReplace = $true
            }
        } elseif ($PSCmdlet.ParameterSetName -eq "Recovery") {
            Write-Message -Message "$($Database.Count) databases to recover" -level Verbose
            foreach ($Database in $DatabaseName) {
                if ($Database -is [object]) {
                    #We've got an object, try the normal options Database, DatabaseName, Name
                    if ("Database" -in $Database.PSobject.Properties.Name) {
                        [string]$DataBase = $Database.Database
                    } elseif ("DatabaseName" -in $Database.PSobject.Properties.Name) {
                        [string]$DataBase = $Database.DatabaseName
                    } elseif ("Name" -in $Database.PSobject.Properties.Name) {
                        [string]$Database = $Database.name
                    }
                }
                Write-Message -Level Verbose -Message "existence - $($RestoreInstance.Databases[$DataBase].State)"
                if ($RestoreInstance.Databases[$DataBase].State -ne 'Existing') {
                    Write-Message -Message "$Database does not exist on $RestoreInstance" -level Warning
                    continue
                }
                if ($RestoreInstance.Databases[$Database].Status -ne "Restoring") {
                    Write-Message -Message "$Database on $RestoreInstance is not in a Restoring State" -Level Warning
                    continue
                }
                $RestoreComplete = $true
                $RecoverSql = "RESTORE DATABASE $Database WITH RECOVERY"
                Write-Message -Message "Recovery Sql Query - $RecoverSql" -level verbose
                try {
                    $RestoreInstance.query($RecoverSql)
                } catch {
                    $RestoreComplete = $False
                    $ExitError = $_.Exception.InnerException
                    Write-Message -Level Warning -Message "Failed to recover $Database on $RestoreInstance, `n $ExitError"
                } finally {
                    [PSCustomObject]@{
                        SqlInstance     = $SqlInstance
                        DatabaseName    = $Database
                        RestoreComplete = $RestoreComplete
                        Scripts         = $RecoverSql
                    }
                }
            }
        }
    }
    end {
        if (Test-FunctionInterrupt) {
            return
        }
        if ($PSCmdlet.ParameterSetName -like "Restore*") {
            if ($BackupHistory.Count -eq 0) {
                Write-Message -Level Warning -Message "No backups passed through. `n This could mean the SQL instance cannot see the referenced files, the file's headers could not be read or some other issue"
                return
            }
            Write-Message -message "Processing DatabaseName - $DatabaseName" -Level Verbose
            $FilteredBackupHistory = @()
            if (Test-Bound -ParameterName GetBackupInformation) {
                Write-Message -Message "Setting $GetBackupInformation to BackupHistory" -Level Verbose
                Set-Variable -Name $GetBackupInformation -Value $BackupHistory -Scope Global
            }
            if ($StopAfterGetBackupInformation) {
                return
            }
            $pathSep = Get-DbaPathSep -Server $RestoreInstance
            $null = $BackupHistory | Format-DbaBackupInformation -DataFileDirectory $DestinationDataDirectory -LogFileDirectory $DestinationLogDirectory -DestinationFileStreamDirectory $DestinationFileStreamDirectory -DatabaseFileSuffix $DestinationFileSuffix -DatabaseFilePrefix $DestinationFilePrefix -DatabaseNamePrefix $RestoredDatabaseNamePrefix -ReplaceDatabaseName $DatabaseName -Continue:$Continue -ReplaceDbNameInFile:$ReplaceDbNameInFile -FileMapping $FileMapping -PathSep $pathSep

            if (Test-Bound -ParameterName FormatBackupInformation) {
                Set-Variable -Name $FormatBackupInformation -Value $BackupHistory -Scope Global
            }
            if ($StopAfterFormatBackupInformation) {
                return
            }

            $FilteredBackupHistory = $BackupHistory | Select-DbaBackupInformation -RestoreTime $RestoreTime -IgnoreLogs:$IgnoreLogBackups -ContinuePoints $ContinuePoints -LastRestoreType $LastRestoreType -DatabaseName $DatabaseName

            if (Test-Bound -ParameterName SelectBackupInformation) {
                Write-Message -Message "Setting $SelectBackupInformation to FilteredBackupHistory" -Level Verbose
                Set-Variable -Name $SelectBackupInformation -Value $FilteredBackupHistory -Scope Global

            }
            if ($StopAfterSelectBackupInformation) {
                return
            }
            try {
                Write-Message -Level Verbose -Message "VerifyOnly = $VerifyOnly"
                $null = $FilteredBackupHistory | Test-DbaBackupInformation -SqlInstance $RestoreInstance -WithReplace:$WithReplace -Continue:$Continue -VerifyOnly:$VerifyOnly -EnableException:$true -OutputScriptOnly:$OutputScriptOnly
            } catch {
                Stop-Function -ErrorRecord $_ -Message "Failure" -Continue
            }
            if (Test-Bound -ParameterName TestBackupInformation) {
                Set-Variable -Name $TestBackupInformation -Value $FilteredBackupHistory -Scope Global
            }
            if ($StopAfterTestBackupInformation) {
                return
            }
            $DbVerfied = ($FilteredBackupHistory | Where-Object {
                    $_.IsVerified -eq $True
                } | Select-Object -Property Database -Unique).Database -join ','
            Write-Message -Message "$DbVerfied passed testing" -Level Verbose
            if (($FilteredBackupHistory | Where-Object {
                        $_.IsVerified -eq $True
                    }).count -lt $FilteredBackupHistory.count) {
                $DbUnVerified = ($FilteredBackupHistory | Where-Object {
                        $_.IsVerified -eq $False
                    } | Select-Object -Property Database -Unique).Database -join ','
                if ($AllowContinue) {
                    Write-Message -Message "$DbUnverified failed testing, AllowContinue set" -Level Verbose
                } else {
                    Stop-Function -Message "Database $DbUnverified failed testing, AllowContinue not set, exiting"
                    return
                }
            }
            If ($PSCmdlet.ParameterSetName -eq "RestorePage") {
                if (($FilteredBackupHistory.Database | select-Object -unique | Measure-Object).count -ne 1) {
                    Stop-Function -Message "Must only 1 database passed in for Page Restore. Sorry"
                    return
                } else {
                    $WithReplace = $false
                }
            }
            Write-Message -Message "Passing in to restore" -Level Verbose
            if ($PSCmdlet.ParameterSetName -eq "RestorePage" -and $RestoreInstance.Edition -notlike '*Enterprise*') {
                Write-Message -Message "Taking Tail log backup for page restore for non-Enterprise" -Level Verbose
                $TailBackup = Backup-DbaDatabase -SqlInstance $RestoreInstance -Database $DatabaseName -Type Log -BackupDirectory $PageRestoreTailFolder -Norecovery -CopyOnly
            }
            try {
                $FilteredBackupHistory | Where-Object {
                    $_.IsVerified -eq $true
                } | Invoke-DbaAdvancedRestore -SqlInstance $RestoreInstance -WithReplace:$WithReplace -RestoreTime $RestoreTime -StandbyDirectory $StandbyDirectory -NoRecovery:$NoRecovery -Continue:$Continue -OutputScriptOnly:$OutputScriptOnly -BlockSize $BlockSize -MaxTransferSize $MaxTransferSize -Buffercount $Buffercount -KeepCDC:$KeepCDC -VerifyOnly:$VerifyOnly -PageRestore $PageRestore -EnableException -AzureCredential $AzureCredential
            } catch {
                Stop-Function -Message "Failure" -ErrorRecord $_ -Continue -Target $RestoreInstance
            }
            if ($PSCmdlet.ParameterSetName -eq "RestorePage") {
                if ($RestoreInstance.Edition -like '*Enterprise*') {
                    Write-Message -Message "Taking Tail log backup for page restore for Enterprise" -Level Verbose
                    $TailBackup = Backup-DbaDatabase -SqlInstance $RestoreInstance -Database $DatabaseName -Type Log -BackupDirectory $PageRestoreTailFolder -Norecovery -CopyOnly
                }
                Write-Message -Message "Restoring Tail log backup for page restore" -Level Verbose
                $TailBackup | Restore-DbaDatabase -SqlInstance $RestoreInstance -TrustDbBackupHistory -NoRecovery -OutputScriptOnly:$OutputScriptOnly -BlockSize $BlockSize -MaxTransferSize $MaxTransferSize -Buffercount $Buffercount -Continue
                Restore-DbaDatabase -SqlInstance $RestoreInstance -Recover -DatabaseName $DatabaseName -OutputScriptOnly:$OutputScriptOnly
            }
        }
    }
}

tools\dbatools\functions\Restore-DbaDbCertificate.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Restore-DbaDbCertificate {
    <#
    .SYNOPSIS
        Imports certificates from .cer files using SMO.

    .DESCRIPTION
        Imports certificates from.cer files using SMO.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Path
        The Path the contains the certificate and private key files. The path can be a directory or a specific certificate.

    .PARAMETER SecurePassword
        Secure string used to decrypt the private key.

    .PARAMETER EncryptionPassword
        If specified this will be used to encrypt the private key.

    .PARAMETER Database
        The database where the certificate imports into. Defaults to master.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Migration, Certificate
        Author: Jess Pomfret (@jpomfret), jesspomfret.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Restore-DbaDbCertificate

    .EXAMPLE
        PS C:\> Restore-DbaDbCertificate -SqlInstance Server1 -Path \\Server1\Certificates -SecurePassword (ConvertTo-SecureString -Force -AsPlainText GoodPass1234!!)

        Restores all the certificates in the specified path, password is used to both decrypt and encrypt the private key.

    .EXAMPLE
        PS C:\> Restore-DbaDbCertificate -SqlInstance Server1 -Path \\Server1\Certificates\DatabaseTDE.cer -SecurePassword (ConvertTo-SecureString -force -AsPlainText GoodPass1234!!)

        Restores the DatabaseTDE certificate to Server1 and uses the MasterKey to encrypt the private key.

    #>
    [CmdletBinding(DefaultParameterSetName = "Default", SupportsShouldProcess, ConfirmImpact = "High")]
    param (
        [Parameter(Mandatory)]
        [DbaInstanceParameter]$SqlInstance,
        [PSCredential]$SqlCredential,
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("FullName")]
        [object[]]$Path,
        [Security.SecureString]$EncryptionPassword,
        [string]$Database = "master",
        [Alias("Password")]
        [Security.SecureString]$SecurePassword = (Read-Host "Password" -AsSecureString),
        [switch]$EnableException
    )
    process {
        try {
            $server = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $sqlcredential
        } catch {
            Stop-Function -Message "Failed to connect to: $SqlInstance" -Target $SqlInstance -ErrorRecord $_
            return
        }

        foreach ($fullname in $Path) {
            if (-not $SqlInstance.IsLocalHost -and -not $fullname.StartsWith('\')) {
                Stop-Function -Message "Path ($fullname) must be a UNC share when SQL instance is not local." -Continue -Target $fullname
            }

            if (-not (Test-DbaPath -SqlInstance $server -Path $fullname)) {
                Stop-Function -Message "$SqlInstance cannot access $fullname" -Continue -Target $fullname
            }

            $directory = Split-Path $fullname
            $filename = Split-Path $fullname -Leaf
            $certname = [io.path]::GetFileNameWithoutExtension($filename)

            if ($Pscmdlet.ShouldProcess("$certname on $SqlInstance", "Importing Certificate")) {
                $smocert = New-Object Microsoft.SqlServer.Management.Smo.Certificate
                $smocert.Name = $certname
                $smocert.Parent = $server.Databases[$Database]
                Write-Message -Level Verbose -Message "Creating Certificate: $certname"
                try {
                    $fullcertname = "$directory\$certname.cer"
                    $privatekey = "$directory\$certname.pvk"
                    Write-Message -Level Verbose -Message "Full certificate path: $fullcertname"
                    Write-Message -Level Verbose -Message "Private key: $privatekey"
                    $fromfile = $true

                    if ($EncryptionPassword) {
                        $smocert.Create($fullcertname, $fromfile, $privatekey, [System.Runtime.InteropServices.marshal]::PtrToStringAuto([System.Runtime.InteropServices.marshal]::SecureStringToBSTR($password)), [System.Runtime.InteropServices.marshal]::PtrToStringAuto([System.Runtime.InteropServices.marshal]::SecureStringToBSTR($password)))
                    } else {
                        $smocert.Create($fullcertname, $fromfile, $privatekey, [System.Runtime.InteropServices.marshal]::PtrToStringAuto([System.Runtime.InteropServices.marshal]::SecureStringToBSTR($password)))
                    }
                    $cert = $smocert
                } catch {
                    Write-Message -Level Warning -Message $_ -ErrorRecord $_ -Target $instance
                }
            }
            Get-DbaDbCertificate -SqlInstance $server -Database $Database -Certificate $cert.Name
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias Retore-DbaDatabaseCertificate

    }
}

tools\dbatools\functions\Restore-DbaDbSnapshot.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Restore-DbaDbSnapshot {
    <#
    .SYNOPSIS
        Restores databases from snapshots

    .DESCRIPTION
        Restores the database from the snapshot, discarding every modification made to the database
        NB: Restoring to a snapshot will result in every other snapshot of the same database to be dropped
        It also fixes some long-standing bugs in SQL Server when restoring from snapshots

    .PARAMETER SqlInstance
        The target SQL Server instance or instances

    .PARAMETER SqlCredential
        Credential object used to connect to the SQL Server as a different user

    .PARAMETER Database
        Restores from the last snapshot databases with this names only. You can pass either Databases or Snapshots

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto-populated from the server

    .PARAMETER Snapshot
        Restores databases from snapshots with this names only. You can pass either Databases or Snapshots

    .PARAMETER InputObject
        Allows piping from other Snapshot commands

    .PARAMETER Force
        If restoring from a snapshot involves dropping any other snapshot, you need to explicitly
        use -Force to let this command delete the ones not involved in the restore process.
        Also, -Force will forcibly kill all running queries that prevent the restore process.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run

    .PARAMETER Confirm
        Prompts for confirmation of every step.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Snapshot, Backup, Restore, Database
        Author: Simone Bizzotto (@niphold)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Restore-DbaDbSnapshot

    .EXAMPLE
        PS C:\> Restore-DbaDbSnapshot -SqlInstance sql2014 -Database HR, Accounting

        Restores HR and Accounting databases using the latest snapshot available

    .EXAMPLE
        PS C:\> Restore-DbaDbSnapshot -SqlInstance sql2014 -Database HR -Force

        Restores HR database from latest snapshot and kills any active connections in the database on sql2014.

    .EXAMPLE
        PS C:\> Get-DbaDbSnapshot -SqlInstance sql2016 -Database HR | Restore-DbaDbSnapshot -Force

        Restores HR database from latest snapshot and kills any active connections in the database on sql2016.

    .EXAMPLE
        PS C:\> Get-DbaDbSnapshot -SqlInstance sql2016 | Out-GridView -PassThru | Restore-DbaDbSnapshot

        Allows the selection of snapshots on sql2016 to restore

    .EXAMPLE
        PS C:\> Restore-DbaDbSnapshot -SqlInstance sql2014 -Snapshot HR_snap_20161201, Accounting_snap_20161101

        Restores databases from snapshots named HR_snap_20161201 and Accounting_snap_20161101

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstance[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [object[]]$Snapshot,
        [Parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Database[]]$InputObject,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        if (-not $Snapshot -and -not $Database -and -not $ExcludeDatabase -and -not $InputObject) {
            Stop-Function -Message "You must specify either -Snapshot (to restore from) or -Database/-ExcludeDatabase (to restore to) or pipe in a snapshot"
            return
        }

        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $InputObject += Get-DbaDbSnapshot -SqlInstance $server -Database $Database -ExcludeDatabase $ExcludeDatabase -Snapshot $Snapshot | Sort-Object CreateDate -Descending

            if ($Snapshot) {
                # Restore databases from these snapshots
                Write-Message -Level Verbose -Message "Selected only snapshots"
                $dbs = $InputObject | Where-Object { $Snapshot -contains $_.Name }
                $baseDatabases = $dbs | Select-Object -ExpandProperty DatabaseSnapshotBaseName | Get-Unique
                if ($baseDatabases.Count -ne $Snapshot.Count -and $dbs.Count -ne 0) {
                    Stop-Function -Message "Failure. Multiple snapshots selected for the same database" -Continue
                }
            }
        }

        foreach ($snap in $InputObject) {
            # In the event someone passed -Database and it got all the snaps, most of which were dropped by the first
            if ($snap.Parent) {
                $server = $snap.Parent

                if (-not $snap.IsDatabaseSnapshot) {
                    Stop-Function -Continue -Message "$snap on $server is not a valid snapshot"
                }

                if (-not ($snap.IsAccessible)) {
                    Stop-Function -Message "Database $snap is not accessible on $($snap.Parent)." -Continue
                }

                $othersnaps = $server.Databases | Where-Object { $_.DatabaseSnapshotBaseName -eq $snap.DatabaseSnapshotBaseName -and $_.Name -ne $snap.Name }

                $db = $server.Databases | Where-Object Name -eq $snap.DatabaseSnapshotBaseName
                $loginfo = $db.LogFiles | Select-Object Id, Size, Growth, GrowthType

                if (($snap | Where-Object FileGroupType -eq 'FileStreamDataFileGroup')) {
                    Stop-Function -Message "Database $snap on $server has FileStream group(s). You cannot restore from snapshots" -Continue
                }

                if ($othersnaps -and -not $force) {
                    Stop-Function -Message "The restore process for $db from $snap needs to drop other snapshots on $db. Use -Force if you want to drop these snapshots" -Continue
                }

                if ($Pscmdlet.ShouldProcess($server, "Remove other db snapshots for $db")) {
                    try {
                        $null = $othersnaps | Remove-DbaDatabase -Confirm:$false -EnableException
                    } catch {
                        Stop-Function -Message "Failed to remove other snapshots for $db on $server" -ErrorRecord $_ -Continue
                    }
                }

                # Need a proper restore now
                if ($Pscmdlet.ShouldProcess($server, "Restore db $db from $snap")) {
                    try {
                        if ($Force) {
                            $null = Stop-DbaProcess -SqlInstance $server -Database $db.Name, $snap.Name -WarningAction SilentlyContinue
                        }

                        $null = $server.Query("USE master; RESTORE DATABASE [$($db.Name)] FROM DATABASE_SNAPSHOT='$($snap.Name)'")
                    } catch {
                        Stop-Function -Message "Failiure attempting to restore $db on $server" -ErrorRecord $_ -Continue
                    }
                }

                # Comparing sizes before and after, need to refresh to see if size
                foreach ($log in $db.LogFiles) {
                    $log.Refresh()
                }

                foreach ($log in $db.LogFiles) {
                    $matching = $loginfo | Where-Object ID -eq $log.ID
                    $changeflag = 0
                    foreach ($prop in @('Size', 'Growth', 'Growth', 'GrowthType')) {
                        if ($matching.$prop -ne $log.$prop) {
                            $changeflag = 1
                            $log.$prop = $matching.$prop
                        }
                    }
                    if ($changeflag -ne 0) {
                        Write-Message -Level Verbose -Message "Restoring original settings for log file"
                        $log.Alter()
                    }
                }

                Write-Message -Level Verbose -Message "Restored. Remember to take a backup now, and also to remove the snapshot if not needed."
                Get-DbaDatabase -SqlInstance $server -Database $db.Name
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias Restore-DbaFromDatabaseSnapshot
    }
}

tools\dbatools\functions\Set-DbaErrorLogConfig.ps1

function Set-DbaErrorLogConfig {
    <#
    .SYNOPSIS
        Set the configuration for the ErrorLog on a given SQL Server instance

    .DESCRIPTION
        Sets the number of log files configured on all versions, and size in KB in SQL Server 2012+ and above.

        To set the Path to the ErrorLog, use Set-DbaStartupParameter -ErrorLog. Note that this command requires
        remote, administrative access to the Windows/WMI server, similar to SQL Configuration Manager.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER LogCount
        Integer value between 6 and 99 for setting the number of error log files to keep for SQL Server instance.

    .PARAMETER LogSize
        Integer value for the size in KB that you want the error log file to grow. This is feature only in SQL Server 2012 and higher. When the file reaches that limit SQL Server will roll the error log over.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Instance, ErrorLog
        Author: Shawn Melton (@wsmelton), https://wsmelton.github.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Set-DbaErrorLogConfig

    .EXAMPLE
        PS C:\> Set-DbaErrorLogConfig -SqlInstance sql2017,sql2014 -LogCount 25

        Sets the number of error log files to 25 on sql2017 and sql2014

    .EXAMPLE
        PS C:\> Set-DbaErrorLogConfig -SqlInstance sql2014 -LogSize 102400

        Sets the size of the error log file, before it rolls over, to 102400 KB (100 MB) on sql2014

    .EXAMPLE
        PS C:\> Set-DbaErrorLogConfig -SqlInstance sql2012 -LogCount 25 -LogSize 500

        Sets the number of error log files to 25 and size before it will roll over to 500 KB on sql2012

    #>
    [cmdletbinding(SupportsShouldProcess)]
    param(
        [Parameter(ValueFromPipelineByPropertyName, Mandatory)]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [ValidateRange(6, 99)]
        [int]$LogCount,
        [int]$LogSize,
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $currentNumLogs = $server.NumberOfLogFiles
            $currentLogSize = $server.ErrorLogSizeKb

            $collection = [PSCustomObject]@{
                ComputerName = $server.ComputerName
                InstanceName = $server.ServiceName
                SqlInstance  = $server.DomainInstanceName
                LogCount     = $currentNumLogs
                LogSize      = [dbasize]($currentLogSize * 1024)
            }
            if (Test-Bound -ParameterName 'LogSize') {
                if ($server.VersionMajor -lt 11) {
                    Stop-Function -Message "Size is cannot be set on $instance. SQL Server 2008 R2 and below not supported." -Continue
                }
                if ($LogSize -eq $currentLogSize) {
                    Write-Message -Level Warning -Message "The provided value for LogSize is already set to $LogSize KB on $instance"
                } else {
                    if ($PSCmdlet.ShouldProcess($server, "Updating log size from [$currentLogSize] to [$LogSize]")) {
                        try {
                            $server.ErrorLogSizeKb = $LogSize
                            $server.Alter()
                        } catch {
                            Stop-Function -Message "Issue setting number of log files on $instance" -Target $instance -ErrorRecord $_ -Exception $_.Exception.InnerException.InnerException.InnerException -Continue
                        }
                    }
                    if ($PSCmdlet.ShouldProcess($server, "Output final results of setting error log size")) {
                        $server.Refresh()
                        $collection.LogSize = [dbasize]($server.ErrorLogSizeKb * 1024)
                    }
                }
            }

            if (Test-Bound -ParameterName 'LogCount') {
                if ($LogCount -eq $currentNumLogs) {
                    Write-Message -Level Warning -Message "The provided value for LogCount is already set to $LogCount on $instance"
                } else {
                    if ($PSCmdlet.ShouldProcess($server, "Setting number of logs from [$currentNumLogs] to [$LogCount]")) {
                        try {
                            $server.NumberOfLogFiles = $LogCount
                            $server.Alter()
                        } catch {
                            Stop-Function -Message "Issue setting number of log files on $instance" -Target $instance -ErrorRecord $_ -Exception $_.Exception.InnerException.InnerException.InnerException -Continue
                        }
                    }
                    if ($PSCmdlet.ShouldProcess($server, "Output final results of setting number of log files")) {
                        $server.Refresh()
                        $collection.LogCount = $server.NumberOfLogFiles
                    }
                }
            }
            $collection
        }
    }
}

tools\dbatools\functions\Set-DbaLogin.ps1

function Set-DbaLogin {
    <#
    .SYNOPSIS
        Set-DbaLogin makes it possible to make changes to one or more logins.

    .DESCRIPTION
        Set-DbaLogin will enable you to change the password, unlock, rename, disable or enable, deny or grant login privileges to the login. It's also possible to add or remove server roles from the login.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2000 or greater.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Login
        The login that needs to be changed

    .PARAMETER SecurePassword
        The new password for the login This can be either a credential or a secure string.

    .PARAMETER Unlock
        Switch to unlock an account. This will only be used in conjunction with the -SecurePassword parameter.
        The default is false.

    .PARAMETER MustChange
        Does the user need to change his/her password. This will only be used in conjunction with the -SecurePassword parameter.
        The default is false.

    .PARAMETER NewName
        The new name for the login.

    .PARAMETER Disable
        Disable the login

    .PARAMETER Enable
        Enable the login

    .PARAMETER DenyLogin
        Deny access to SQL Server

    .PARAMETER GrantLogin
        Grant access to SQL Server

    .PARAMETER PasswordPolicyEnforced
        Should the password policy be enforced.

    .PARAMETER AddRole
        Add one or more server roles to the login
        The following roles can be used "bulkadmin", "dbcreator", "diskadmin", "processadmin", "public", "securityadmin", "serveradmin", "setupadmin", "sysadmin".

    .PARAMETER RemoveRole
        Remove one or more server roles to the login
        The following roles can be used "bulkadmin", "dbcreator", "diskadmin", "processadmin", "public", "securityadmin", "serveradmin", "setupadmin", "sysadmin".

    .PARAMETER InputObject
        Allows logins to be piped in from Get-DbaLogin

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Login
        Author: Sander Stad (@sqlstad), sqlstad.nl

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Set-DbaLogin

    .EXAMPLE
        PS C:\> $SecurePassword = ConvertTo-SecureString "PlainTextPassword" -AsPlainText -Force
        PS C:\> $cred = New-Object System.Management.Automation.PSCredential ("username", $SecurePassword)
        PS C:\> Set-DbaLogin -SqlInstance sql1 -Login login1 -SecurePassword $cred -Unlock -MustChange

        Set the new password for login1 using a credential, unlock the account and set the option
        that the user must change password at next logon.

    .EXAMPLE
        PS C:\> Set-DbaLogin -SqlInstance sql1 -Login login1 -Enable

        Enable the login

    .EXAMPLE
        PS C:\> Set-DbaLogin -SqlInstance sql1 -Login login1, login2, login3, login4 -Enable

        Enable multiple logins

    .EXAMPLE
        PS C:\> Set-DbaLogin -SqlInstance sql1, sql2, sql3 -Login login1, login2, login3, login4 -Enable

        Enable multiple logins on multiple instances

    .EXAMPLE
        PS C:\> Set-DbaLogin -SqlInstance sql1 -Login login1 -Disable

        Disable the login

    .EXAMPLE
        PS C:\> Set-DbaLogin -SqlInstance sql1 -Login login1 -DenyLogin

        Deny the login to connect to the instance

    .EXAMPLE
        PS C:\> Set-DbaLogin -SqlInstance sql1 -Login login1 -GrantLogin

        Grant the login to connect to the instance

    .EXAMPLE
        PS C:\> Set-DbaLogin -SqlInstance sql1 -Login login1 -PasswordPolicyEnforced

        Enforces the password policy on a login

    .EXAMPLE
        PS C:\> Set-DbaLogin -SqlInstance sql1 -Login login1 -PasswordPolicyEnforced:$false

        Disables enforcement of the password policy on a login

    .EXAMPLE
        PS C:\> Set-DbaLogin -SqlInstance sql1 -Login test -AddRole serveradmin

        Add the server role "serveradmin" to the login

    .EXAMPLE
        PS C:\> Set-DbaLogin -SqlInstance sql1 -Login test -RemoveRole bulkadmin

        Remove the server role "bulkadmin" to the login

    .EXAMPLE
        PS C:\> $login = Get-DbaLogin -SqlInstance sql1 -Login test
        PS C:\> $login | Set-DbaLogin -Disable

        Disable the login from the pipeline

    #>

    [CmdletBinding(SupportsShouldProcess)]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSAvoidUsingPlainTextForPassword", "", Justification = "For Parameter Password")]
    param (
        [Alias('ServerInstance', 'SqlServer')]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$Login,
        [Alias("Password")]
        [object]$SecurePassword, #object so that it can accept credential or securestring
        [switch]$Unlock,
        [switch]$MustChange,
        [string]$NewName,
        [switch]$Disable,
        [switch]$Enable,
        [switch]$DenyLogin,
        [switch]$GrantLogin,
        [switch]$PasswordPolicyEnforced,
        [ValidateSet('bulkadmin', 'dbcreator', 'diskadmin', 'processadmin', 'public', 'securityadmin', 'serveradmin', 'setupadmin', 'sysadmin')]
        [string[]]$AddRole,
        [ValidateSet('bulkadmin', 'dbcreator', 'diskadmin', 'processadmin', 'public', 'securityadmin', 'serveradmin', 'setupadmin', 'sysadmin')]
        [string[]]$RemoveRole,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Login[]]$InputObject,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        # Check the parameters
        if ((Test-Bound -ParameterName 'SqlInstance') -and (Test-Bound -ParameterName 'Login' -Not)) {
            Stop-Function -Message 'You must specify a Login when using SqlInstance'
        }

        if ((Test-Bound -ParameterName 'NewName') -and $Login -eq $NewName) {
            Stop-Function -Message 'Login name is the same as the value in -NewName' -Target $Login -Continue
        }

        if ((Test-Bound -ParameterName 'Disable') -and (Test-Bound -ParameterName 'Enable')) {
            Stop-Function -Message 'You cannot use both -Enable and -Disable together' -Target $Login -Continue
        }

        if ((Test-Bound -ParameterName 'GrantLogin') -and (Test-Bound -ParameterName 'DenyLogin')) {
            Stop-Function -Message 'You cannot use both -GrantLogin and -DenyLogin together' -Target $Login -Continue
        }

        if (Test-bound -ParameterName 'SecurePassword') {
            switch ($SecurePassword.GetType().Name) {
                'PSCredential' { $NewSecurePassword = $SecurePassword.Password }
                'SecureString' { $NewSecurePassword = $SecurePassword }
                default {
                    Stop-Function -Message 'Password must be a PSCredential or SecureString' -Target $Login
                }
            }
        }
    }

    process {
        if (Test-FunctionInterrupt) { return }

        $allLogins = @{}
        foreach ($instance in $sqlinstance) {
            # Try connecting to the instance
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message 'Failure' -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }
            $allLogins[$instance.ToString()] = Get-DbaLogin -SqlInstance $server
            $InputObject += $allLogins[$instance.ToString()] | Where-Object { ($_.Name -eq $Login) -and ($_.IsSystemObject -eq $false) -and ($_.Name -notlike '##*') }
        }

        # Loop through all the logins
        foreach ($l in $InputObject) {
            if ($Pscmdlet.ShouldProcess($l, "Setting Changes to Login on $($server.name)")) {
                $server = $l.Parent

                # Create the notes
                $notes = @()

                # Change the name
                if (Test-Bound -ParameterName 'NewName') {
                    # Check if the new name doesn't already exist
                    if ($allLogins[$server.Name].Name -notcontains $NewName) {
                        try {
                            $l.Rename($NewName)
                        } catch {
                            $notes += "Couldn't rename login"
                            Stop-Function -Message "Something went wrong changing the name for $l" -Target $l -ErrorRecord $_ -Continue
                        }
                    } else {
                        $notes += 'New login name already exists'
                        Write-Message -Message "New login name $NewName already exists on $instance" -Level Verbose
                    }
                }

                # Change the password
                if (Test-bound -ParameterName 'SecurePassword') {
                    try {
                        $l.ChangePassword($NewSecurePassword, $Unlock, $MustChange)
                        $passwordChanged = $true
                    } catch {
                        $notes += "Couldn't change password"
                        $passwordChanged = $false
                        Stop-Function -Message "Something went wrong changing the password for $l" -Target $l -ErrorRecord $_ -Continue
                    }
                }

                # Disable the login
                if (Test-Bound -ParameterName 'Disable') {
                    if ($l.IsDisabled) {
                        Write-Message -Message "Login $l is already disabled" -Level Verbose
                    } else {
                        try {
                            $l.Disable()
                        } catch {
                            $notes += "Couldn't disable login"
                            Stop-Function -Message "Something went wrong disabling $l" -Target $l -ErrorRecord $_ -Continue
                        }
                    }
                }

                # Enable the login
                if (Test-Bound -ParameterName 'Enable') {
                    if (-not $l.IsDisabled) {
                        Write-Message -Message "Login $l is already enabled" -Level Verbose
                    } else {
                        try {
                            $l.Enable()
                        } catch {
                            $notes += "Couldn't enable login"
                            Stop-Function -Message "Something went wrong enabling $l" -Target $l -ErrorRecord $_ -Continue
                        }
                    }
                }

                # Deny access
                if (Test-Bound -ParameterName 'DenyLogin') {
                    if ($l.DenyWindowsLogin) {
                        Write-Message -Message "Login $l already has login access denied" -Level Verbose
                    } else {
                        $l.DenyWindowsLogin = $true
                    }
                }

                # Grant access
                if (Test-Bound -ParameterName 'GrantLogin') {
                    if (-not $l.DenyWindowsLogin) {
                        Write-Message -Message "Login $l already has login access granted" -Level Verbose
                    } else {
                        $l.DenyWindowsLogin = $false
                    }
                }

                # Enforce password policy
                if (Test-Bound -ParameterName 'PasswordPolicyEnforced') {
                    if ($l.PasswordPolicyEnforced -eq $PasswordPolicyEnforced) {
                        Write-Message -Message "Login $l password policy is already set to $($l.PasswordPolicyEnforced)" -Level Verbose
                    } else {
                        $l.PasswordPolicyEnforced = $PasswordPolicyEnforced
                    }
                }

                # Add server roles to login
                if ($AddRole) {
                    # Loop through each of the roles
                    foreach ($role in $AddRole) {
                        try {
                            $l.AddToRole($role)
                        } catch {
                            $notes += "Couldn't add role $role"
                            Stop-Function -Message "Something went wrong adding role $role to $l" -Target $l -ErrorRecord $_ -Continue
                        }
                    }
                }

                # Remove server roles from login
                if ($RemoveRole) {
                    # Loop through each of the roles
                    foreach ($role in $RemoveRole) {
                        try {
                            $server.Roles[$role].DropMember($l.Name)
                        } catch {
                            $notes += "Couldn't remove role $role"
                            Stop-Function -Message "Something went wrong removing role $role to $l" -Target $l -ErrorRecord $_ -Continue
                        }
                    }
                }

                # Alter the login to make the changes
                $l.Alter()

                # Retrieve the server roles for the login
                $roles = Get-DbaServerRoleMember -SqlInstance $server | Where-Object { $_.Name -eq $l.Name }

                # Check if there were any notes to include in the results
                if ($notes) {
                    $notes = $notes | Get-Unique
                    $notes = $notes -Join ';'
                } else {
                    $notes = $null
                }
                $rolenames = $roles.Role | Select-Object -Unique

                Add-Member -Force -InputObject $l -MemberType NoteProperty -Name ComputerName -Value $server.ComputerName
                Add-Member -Force -InputObject $l -MemberType NoteProperty -Name InstanceName -Value $server.ServiceName
                Add-Member -Force -InputObject $l -MemberType NoteProperty -Name SqlInstance -Value $server.DomainInstanceName
                Add-Member -Force -InputObject $l -MemberType NoteProperty -Name PasswordChanged -Value $passwordChanged
                Add-Member -Force -InputObject $l -MemberType NoteProperty -Name ServerRole -Value ($rolenames -join ', ')
                Add-Member -Force -InputObject $l -MemberType NoteProperty -Name Notes -Value $notes

                # backwards compatibility: LoginName, DenyLogin
                Add-Member -Force -InputObject $l -MemberType NoteProperty -Name LoginName -Value $l.Name
                Add-Member -Force -InputObject $l -MemberType NoteProperty -Name DenyLogin -Value $l.DenyWindowsLogin

                $defaults = 'ComputerName', 'InstanceName', 'SqlInstance', 'LoginName', 'DenyLogin', 'IsDisabled', 'IsLocked',
                'PasswordPolicyEnforced', 'MustChangePassword', 'PasswordChanged', 'ServerRole', 'Notes'

                Select-DefaultView -InputObject $l -Property $defaults
            }
        }
    }
}

tools\dbatools\functions\Set-DbaMaxDop.ps1

function Set-DbaMaxDop {
    <#
    .SYNOPSIS
        Sets SQL Server maximum degree of parallelism (Max DOP), then displays information relating to SQL Server Max DOP configuration settings. Works on SQL Server 2005 and higher.

    .DESCRIPTION
        Uses the Test-DbaMaxDop command to get the recommended value if -MaxDop parameter is not specified.

        These are just general recommendations for SQL Server and are a good starting point for setting the "max degree of parallelism" option.

        You can set MaxDop database scoped configurations if the server is version 2016 or higher

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. Defaults to localhost.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        Specifies one or more databases to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        Specifies one or more databases to exclude from processing. Options for this list are auto-populated from the server

    .PARAMETER MaxDop
        Specifies the Max DOP value to set.

    .PARAMETER AllDatabases
        If this switch is enabled, Max DOP will be set on all databases. This switch is only useful on SQL Server 2016 and higher.

    .PARAMETER InputObject
        If Test-SqlMaxDop has been executed prior to this function, the results may be passed in via this parameter.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER WhatIf
        Shows what would happen if the cmdlet runs. The cmdlet is not run.

    .PARAMETER Confirm
        Prompts you for confirmation before running the cmdlet.

    .NOTES
        Tags: MaxDop, SpConfigure
        Author: Claudio Silva (@claudioessilva)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Set-DbaMaxDop

    .EXAMPLE
        PS C:\> Set-DbaMaxDop -SqlInstance sql2008, sql2012

        Sets Max DOP to the recommended value for servers sql2008 and sql2012.

    .EXAMPLE
        PS C:\> Set-DbaMaxDop -SqlInstance sql2014 -MaxDop 4

        Sets Max DOP to 4 for server sql2014.

    .EXAMPLE
        PS C:\> Test-DbaMaxDop -SqlInstance sql2008 | Set-DbaMaxDop

        Gets the recommended Max DOP from Test-DbaMaxDop and applies it to to sql2008.

    .EXAMPLE
        PS C:\> Set-DbaMaxDop -SqlInstance sql2016 -Database db1

        Set recommended Max DOP for database db1 on server sql2016.

    .EXAMPLE
        PS C:\> Set-DbaMaxDop -SqlInstance sql2016 -AllDatabases

        Set recommended Max DOP for all databases on server sql2016.

       #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [int]$MaxDop = -1,
        [Parameter(ValueFromPipeline)]
        [pscustomobject]$InputObject,
        [Alias("All")]
        [switch]$AllDatabases,
        [switch]$EnableException
    )

    process {
        if ((Test-Bound -Parameter Database) -and (Test-Bound -Parameter AllDatabases) -and (Test-Bound -Parameter ExcludeDatabase)) {
            Stop-Function -Category InvalidArgument -Message "-Database, -AllDatabases and -ExcludeDatabase are mutually exclusive. Please choose only one. Quitting."
            return
        }

        $dbscopedconfiguration = $false

        if ($MaxDop -eq -1) {
            $UseRecommended = $true
        }

        if ((Test-Bound -Not -Parameter InputObject)) {
            $InputObject = Test-DbaMaxDop -SqlInstance $sqlinstance -SqlCredential $SqlCredential -Verbose:$false
        } elseif ($null -eq $InputObject.SqlInstance) {
            $InputObject = Test-DbaMaxDop -SqlInstance $sqlinstance -SqlCredential $SqlCredential -Verbose:$false
        }

        $InputObject | Add-Member -Force -NotePropertyName PreviousInstanceMaxDopValue -NotePropertyValue 0
        $InputObject | Add-Member -Force -NotePropertyName PreviousDatabaseMaxDopValue -NotePropertyValue 0

        #If we have servers 2016 or higher we will have a row per database plus the instance level, getting unique we only run one time per instance
        $servers = $InputObject | Select-Object SqlInstance -Unique

        foreach ($server in $servers) {
            $servername = $server.SqlInstance

            try {
                $server = Connect-SqlInstance -SqlInstance $servername -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $servername -Continue
            }

            if (!(Test-SqlSa -SqlInstance $server -SqlCredential $SqlCredential)) {
                Stop-Function -Message "Not a sysadmin on $server. Skipping." -Category PermissionDenied -ErrorRecord $_ -Target $currentServer -Continue
            }

            if ($server.versionMajor -ge 13) {
                Write-Message -Level Verbose -Message "Server '$servername' supports Max DOP configuration per database."

                if ((Test-Bound -Not -Parameter Database) -and (Test-Bound -Not -Parameter ExcludeDatabase)) {
                    #Set at instance level
                    $InputObject = $InputObject | Where-Object { $_.DatabaseMaxDop -eq "N/A" }
                } else {
                    $dbscopedconfiguration = $true

                    if ((Test-Bound -Not -Parameter AllDatabases) -and (Test-Bound -Parameter Database)) {
                        $InputObject = $InputObject | Where-Object { $_.Database -in $Database }
                    } elseif ((Test-Bound -Not -Parameter AllDatabases) -and (Test-Bound -Parameter ExcludeDatabase)) {
                        $InputObject = $InputObject | Where-Object { $_.Database -notin $ExcludeDatabase }
                    } else {
                        if (Test-Bound -Parameter AllDatabases) {
                            $InputObject = $InputObject | Where-Object { $_.DatabaseMaxDop -ne "N/A" }
                        } else {
                            $InputObject = $InputObject | Where-Object { $_.DatabaseMaxDop -eq "N/A" }
                            $dbscopedconfiguration = $false
                        }
                    }
                }
            } else {
                if ((Test-Bound -Parameter database) -or (Test-Bound -Parameter AllDatabases)) {
                    Write-Message -Level Warning -Message "Server '$servername' (v$($server.versionMajor)) does not support Max DOP configuration at the database level. Remember that this option is only available from SQL Server 2016 (v13). Run the command again without using database related parameters. Skipping."
                    Continue
                }
            }

            foreach ($row in $InputObject | Where-Object { $_.SqlInstance -eq $servername }) {
                if ($UseRecommended -and ($row.RecommendedMaxDop -eq $row.CurrentInstanceMaxDop) -and !($dbscopedconfiguration)) {
                    Write-Message -Level Verbose -Message "$servername is configured properly. No change required."
                    Continue
                }

                if ($UseRecommended -and ($row.RecommendedMaxDop -eq $row.DatabaseMaxDop) -and $dbscopedconfiguration) {
                    Write-Message -Level Verbose -Message "Database $($row.Database) on $servername is configured properly. No change required."
                    Continue
                }

                $row.PreviousInstanceMaxDopValue = $row.CurrentInstanceMaxDop

                try {
                    if ($UseRecommended) {
                        if ($dbscopedconfiguration) {
                            $row.PreviousDatabaseMaxDopValue = $row.DatabaseMaxDop

                            if ($resetDatabases) {
                                Write-Message -Level Verbose -Message "Changing $($row.Database) database max DOP to $($row.DatabaseMaxDop)."
                                $server.Databases["$($row.Database)"].MaxDop = $row.DatabaseMaxDop
                            } else {
                                Write-Message -Level Verbose -Message "Changing $($row.Database) database max DOP from $($row.DatabaseMaxDop) to $($row.RecommendedMaxDop)."
                                $server.Databases["$($row.Database)"].MaxDop = $row.RecommendedMaxDop
                                $row.DatabaseMaxDop = $row.RecommendedMaxDop
                            }

                        } else {
                            Write-Message -Level Verbose -Message "Changing $server SQL Server max DOP from $($row.CurrentInstanceMaxDop) to $($row.RecommendedMaxDop)."
                            $server.Configuration.MaxDegreeOfParallelism.ConfigValue = $row.RecommendedMaxDop
                            $row.CurrentInstanceMaxDop = $row.RecommendedMaxDop
                        }
                    } else {
                        if ($dbscopedconfiguration) {
                            $row.PreviousDatabaseMaxDopValue = $row.DatabaseMaxDop

                            Write-Message -Level Verbose -Message "Changing $($row.Database) database max DOP from $($row.DatabaseMaxDop) to $MaxDop."
                            $server.Databases["$($row.Database)"].MaxDop = $MaxDop
                            $row.DatabaseMaxDop = $MaxDop
                        } else {
                            Write-Message -Level Verbose -Message "Changing $servername SQL Server max DOP from $($row.CurrentInstanceMaxDop) to $MaxDop."
                            $server.Configuration.MaxDegreeOfParallelism.ConfigValue = $MaxDop
                            $row.CurrentInstanceMaxDop = $MaxDop
                        }
                    }

                    if ($dbscopedconfiguration) {
                        if ($Pscmdlet.ShouldProcess($row.Database, "Setting max dop on database")) {
                            $server.Databases["$($row.Database)"].Alter()
                        }
                    } else {
                        if ($Pscmdlet.ShouldProcess($servername, "Setting max dop on instance")) {
                            $server.Configuration.Alter()
                        }
                    }

                    $results = [pscustomobject]@{
                        ComputerName                = $server.ComputerName
                        InstanceName                = $server.ServiceName
                        SqlInstance                 = $server.DomainInstanceName
                        InstanceVersion             = $row.InstanceVersion
                        Database                    = $row.Database
                        DatabaseMaxDop              = $row.DatabaseMaxDop
                        CurrentInstanceMaxDop       = $row.CurrentInstanceMaxDop
                        RecommendedMaxDop           = $row.RecommendedMaxDop
                        PreviousDatabaseMaxDopValue = $row.PreviousDatabaseMaxDopValue
                        PreviousInstanceMaxDopValue = $row.PreviousInstanceMaxDopValue
                    }

                    if ($dbscopedconfiguration) {
                        Select-DefaultView -InputObject $results -Property InstanceName, Database, PreviousDatabaseMaxDopValue, @{
                            name = "CurrentDatabaseMaxDopValue"; expression = {
                                $_.DatabaseMaxDop
                            }
                        }
                    } else {
                        Select-DefaultView -InputObject $results -Property InstanceName, PreviousInstanceMaxDopValue, CurrentInstanceMaxDop
                    }
                } catch {
                    Stop-Function -Message "Could not modify Max Degree of Parallelism for $server." -ErrorRecord $_ -Target $server -Continue
                }
            }
        }
    }
}

tools\dbatools\functions\Set-DbaMaxMemory.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Set-DbaMaxMemory {
    <#
    .SYNOPSIS
        Sets SQL Server 'Max Server Memory' configuration setting to a new value then displays information this setting.

    .DESCRIPTION
        Sets SQL Server max memory then displays information relating to SQL Server Max Memory configuration settings.

        Inspired by Jonathan Kehayias's post about SQL Server Max memory (http://bit.ly/sqlmemcalc), this uses a formula to
        determine the default optimum RAM to use, then sets the SQL max value to that number.

        Jonathan notes that the formula used provides a *general recommendation* that doesn't account for everything that may
        be going on in your specific environment.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Max
        Specifies the max megabytes (MB)

    .PARAMETER InputObject
        A InputObject returned by Test-DbaMaxMemory

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER WhatIf
        Shows what would happen if the cmdlet runs. The cmdlet is not run.

    .PARAMETER Confirm
        Prompts you for confirmation before running the cmdlet.

    .NOTES
        Tags: MaxMemory, Memory
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Set-DbaMaxMemory

    .EXAMPLE
        PS C:\> Set-DbaMaxMemory sqlserver1

        Set max memory to the recommended on just one server named "sqlserver1"

    .EXAMPLE
        PS C:\> Set-DbaMaxMemory -SqlInstance sqlserver1 -Max 2048

        Explicitly set max memory to 2048 on just one server, "sqlserver1"

    .EXAMPLE
        PS C:\> Get-DbaCmsRegServer -SqlInstance sqlserver | Test-DbaMaxMemory | Where-Object { $_.MaxValue -gt $_.Total } | Set-DbaMaxMemory

        Find all servers in SQL Server Central Management Server that have Max SQL memory set to higher than the total memory
        of the server (think 2147483647), then pipe those to Set-DbaMaxMemory and use the default recommendation.

       #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'Medium')]
    param (
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [int]$Max,
        [Parameter(ValueFromPipeline)]
        [PSCustomObject[]]$InputObject,
        [switch]$EnableException
    )
    begin {
        if ($Max -eq 0) {
            $UseRecommended = $true
        }
    }
    process {
        if ($SqlInstance) {
            $InputObject += Test-DbaMaxMemory -SqlInstance $SqlInstance -SqlCredential $SqlCredential
        }

        foreach ($result in $InputObject) {
            $server = $result.Server
            Add-Member -Force -InputObject $result -NotePropertyName PreviousMaxValue -NotePropertyValue $result.MaxValue

            try {
                if ($UseRecommended) {
                    Write-Message -Level Verbose -Message "Change $server SQL Server Max Memory from $($result.MaxValue) to $($result.RecommendedValue) "

                    if ($result.RecommendedValue -eq 0 -or $null -eq $result.RecommendedValue) {
                        $maxMem = $result.RecommendedValue
                        Write-Message -Level VeryVerbose -Message "Max memory recommended: $maxMem"
                        $server.Configuration.MaxServerMemory.ConfigValue = $maxMem
                    } else {
                        $server.Configuration.MaxServerMemory.ConfigValue = $result.RecommendedValue
                    }
                } else {
                    Write-Message -Level Verbose -Message "Change $server SQL Server Max Memory from $($result.MaxValue) to $Max "
                    $server.Configuration.MaxServerMemory.ConfigValue = $Max
                }

                if ($PSCmdlet.ShouldProcess($server.Name, "Change Max Memory from $($result.PreviousMaxValue) to $($server.Configuration.MaxServerMemory.ConfigValue)")) {
                    try {
                        $server.Configuration.Alter()
                        $result.MaxValue = $server.Configuration.MaxServerMemory.ConfigValue
                    } catch {
                        Stop-Function -Message "Failed to apply configuration change for $server" -ErrorRecord $_ -Target $server -Continue
                    }
                }
            } catch {
                Stop-Function -Message "Could not modify Max Server Memory for $server" -ErrorRecord $_ -Target $server -Continue
            }

            Add-Member -InputObject $result -Force -MemberType NoteProperty -Name MaxValue -Value $result.MaxValue
            Select-DefaultView -InputObject $result -Property ComputerName, InstanceName, SqlInstance, Total, MaxValue, PreviousMaxValue
        }
    }
}

tools\dbatools\functions\Set-DbaNetworkCertificate.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Set-DbaNetworkCertificate {
    <#
    .SYNOPSIS
        Sets the network certificate for SQL Server instance

    .DESCRIPTION
        Sets the network certificate for SQL Server instance. This setting is found in Configuration Manager.

        This command also grants read permissions for the service account on the certificate's private key.

        References:
        http://sqlmag.com/sql-server/7-steps-ssl-encryption
        https://azurebi.jppp.org/2016/01/23/using-lets-encrypt-certificates-for-secure-sql-server-connections/
        https://blogs.msdn.microsoft.com/sqlserverfaq/2016/09/26/creating-and-registering-ssl-certificates/

    .PARAMETER SqlInstance
       The target SQL Server instance or instances. Defaults to localhost.

    .PARAMETER Credential
        Allows you to login to the computer (not sql instance) using alternative credentials.

    .PARAMETER Certificate
        The target certificate object

    .PARAMETER Thumbprint
        The thumbprint of the target certificate

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .NOTES
        Tags: Certificate
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Set-DbaNetworkCertificate

    .EXAMPLE
        PS C:\> New-DbaComputerCertificate | Set-DbaNetworkCertificate -SqlInstance localhost\SQL2008R2SP2

        Creates and imports a new certificate signed by an Active Directory CA on localhost then sets the network certificate for the SQL2008R2SP2 to that newly created certificate.

    .EXAMPLE
        PS C:\> Set-DbaNetworkCertificate -SqlInstance sql1\SQL2008R2SP2 -Thumbprint 1223FB1ACBCA44D3EE9640F81B6BA14A92F3D6E2

        Sets the network certificate for the SQL2008R2SP2 instance to the certificate with the thumbprint of 1223FB1ACBCA44D3EE9640F81B6BA14A92F3D6E2 in LocalMachine\My on sql1

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "Low", DefaultParameterSetName = 'Default')]
    param (
        [Parameter(ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "ComputerName")]
        [DbaInstanceParameter[]]$SqlInstance = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [parameter(Mandatory, ParameterSetName = "Certificate", ValueFromPipeline)]
        [System.Security.Cryptography.X509Certificates.X509Certificate2]$Certificate,
        [parameter(Mandatory, ParameterSetName = "Thumbprint")]
        [string]$Thumbprint,
        [switch]$EnableException
    )
    
    process {
        # Registry access
        
        if (Test-FunctionInterrupt) { return }

        if (-not $Certificate -and -not $Thumbprint) {
            Stop-Function -Message "You must specify a certificate or thumbprint"
            return
        }

        if (-not $Thumbprint) {
            Write-Message -Level SomewhatVerbose -Message "Getting thumbprint"
            $Thumbprint = $Certificate.Thumbprint
        }

        foreach ($instance in $sqlinstance) {
            Write-Message -Level VeryVerbose -Message "Processing $instance" -Target $instance
            $null = Test-ElevationRequirement -ComputerName $instance -Continue

            Write-Message -Level Verbose -Message "Resolving hostname"
            $resolved = $null
            $resolved = Resolve-DbaNetworkName -ComputerName $instance -Turbo

            if ($null -eq $resolved) {
                Stop-Function -Message "Can't resolve $instance" -Target $instance -Continue -Category InvalidArgument
            }

            $computername = $instance.ComputerName
            $instancename = $instance.instancename

            try {
                $sqlwmi = Invoke-ManagedComputerCommand -ComputerName $resolved.FQDN -ScriptBlock { $wmi.Services } -Credential $Credential -ErrorAction Stop | Where-Object DisplayName -eq "SQL Server ($instancename)"
            } catch {
                Stop-Function -Message "Failed to access $instance" -Target $instance -Continue -ErrorRecord $_
            }

            if (-not $sqlwmi) {
                Stop-Function -Message "Cannot find $instancename on $computerName" -Continue -Category ObjectNotFound -Target $instance
            }

            $regroot = ($sqlwmi.AdvancedProperties | Where-Object Name -eq REGROOT).Value
            $vsname = ($sqlwmi.AdvancedProperties | Where-Object Name -eq VSNAME).Value
            $instancename = $sqlwmi.DisplayName.Replace('SQL Server (', '').Replace(')', '') # Don't clown, I don't know regex :(
            $serviceaccount = $sqlwmi.ServiceAccount

            if ([System.String]::IsNullOrEmpty($regroot)) {
                $regroot = $sqlwmi.AdvancedProperties | Where-Object { $_ -match 'REGROOT' }
                $vsname = $sqlwmi.AdvancedProperties | Where-Object { $_ -match 'VSNAME' }

                if (![System.String]::IsNullOrEmpty($regroot)) {
                    $regroot = ($regroot -Split 'Value\=')[1]
                    $vsname = ($vsname -Split 'Value\=')[1]
                } else {
                    Stop-Function -Message "Can't find instance $vsname on $instance" -Continue -Category ObjectNotFound -Target $instance
                }
            }

            if ([System.String]::IsNullOrEmpty($vsname)) { $vsname = $instance }

            Write-Message -Level Output -Message "Regroot: $regroot" -Target $instance
            Write-Message -Level Output -Message "ServiceAcct: $serviceaccount" -Target $instance
            Write-Message -Level Output -Message "InstanceName: $instancename" -Target $instance
            Write-Message -Level Output -Message "VSNAME: $vsname" -Target $instance

            $scriptblock = {
                $regroot = $args[0]
                $serviceaccount = $args[1]
                $instancename = $args[2]
                $vsname = $args[3]
                $Thumbprint = $args[4]

                $regpath = "Registry::HKEY_LOCAL_MACHINE\$regroot\MSSQLServer\SuperSocketNetLib"

                $oldthumbprint = (Get-ItemProperty -Path $regpath -Name Certificate).Certificate

                $cert = Get-ChildItem Cert:\LocalMachine -Recurse -ErrorAction Stop | Where-Object { $_.Thumbprint -eq $Thumbprint }

                if ($null -eq $cert) {
                    <# DO NOT use Write-Message as this is inside of a script block #>
                    Write-Warning "Certificate does not exist on $env:COMPUTERNAME"
                    return
                }

                $permission = $serviceaccount, "Read", "Allow"
                $accessRule = New-Object -TypeName System.Security.AccessControl.FileSystemAccessRule -ArgumentList $permission

                $keyPath = $env:ProgramData + "\Microsoft\Crypto\RSA\MachineKeys\"
                $keyName = $cert.PrivateKey.CspKeyContainerInfo.UniqueKeyContainerName
                $keyFullPath = $keyPath + $keyName

                $acl = Get-Acl -Path $keyFullPath
                $null = $acl.AddAccessRule($accessRule)
                Set-Acl -Path $keyFullPath -AclObject $acl

                if ($acl) {
                    Set-ItemProperty -Path $regpath -Name Certificate -Value $Thumbprint.ToString().ToLower() # to make it compat with SQL config
                } else {
                    <# DO NOT use Write-Message as this is inside of a script block #>
                    Write-Warning "Read-only permissions could not be granted to certificate"
                    return
                }

                if (![System.String]::IsNullOrEmpty($oldthumbprint)) {
                    $notes = "Granted $serviceaccount read access to certificate private key. Replaced thumbprint: $oldthumbprint."
                } else {
                    $notes = "Granted $serviceaccount read access to certificate private key"
                }

                $newthumbprint = (Get-ItemProperty -Path $regpath -Name Certificate).Certificate

                [pscustomobject]@{
                    ComputerName          = $env:COMPUTERNAME
                    InstanceName          = $instancename
                    SqlInstance           = $vsname
                    ServiceAccount        = $serviceaccount
                    CertificateThumbprint = $newthumbprint
                    Notes                 = $notes
                }
            }

            if ($PScmdlet.ShouldProcess("local", "Connecting to $instanceName to import new cert")) {
                try {
                    Invoke-Command2 -Raw -ComputerName $resolved.fqdn -Credential $Credential -ArgumentList $regroot, $serviceaccount, $instancename, $vsname, $Thumbprint -ScriptBlock $scriptblock -ErrorAction Stop
                } catch {
                    Stop-Function -Message "Failed to connect to $($resolved.fqdn) using PowerShell remoting!" -ErrorRecord $_ -Target $instance -Continue
                }
            }
        }
    }
}

tools\dbatools\functions\Set-DbaPowerPlan.ps1

function Set-DbaPowerPlan {
    <#
    .SYNOPSIS
        Sets the SQL Server OS's Power Plan.

    .DESCRIPTION
        Sets the SQL Server OS's Power Plan. Defaults to High Performance which is best practice.

        If your organization uses a custom power plan that is considered best practice, specify -CustomPowerPlan.

        References:
        https://support.microsoft.com/en-us/kb/2207548
        http://www.sqlskills.com/blogs/glenn/windows-power-plan-effects-on-newer-intel-processors/

    .PARAMETER ComputerName
        The server(s) to set the Power Plan on.

    .PARAMETER Credential
        Specifies a PSCredential object to use in authenticating to the server(s), instead of the current user account.

    .PARAMETER PowerPlan
        Specifies the Power Plan that you wish to use. Valid options for this match the Windows default Power Plans of "Power Saver", "Balanced", and "High Performance".

    .PARAMETER CustomPowerPlan
        Specifies the name of a custom Power Plan to use.

    .PARAMETER InputObject
        Enables piping from Get-DbaPowerPlan

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .NOTES
        Tags: PowerPlan, OS, Configure
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        Requires: WMI access to servers

    .LINK
        https://dbatools.io/Set-DbaPowerPlan

    .EXAMPLE
        PS C:\> Set-DbaPowerPlan -ComputerName sql2017

        Sets the Power Plan to High Performance. Skips it if its already set.

    .EXAMPLE
        PS C:\> 'Server1', 'Server2' | Set-DbaPowerPlan -PowerPlan Balanced

        Sets the Power Plan to Balanced for Server1 and Server2. Skips it if its already set.

    .EXAMPLE
        PS C:\> $cred = Get-Credential 'Domain\User'
        PS C:\> Set-DbaPowerPlan -ComputerName sql2017 -Credential $cred

        Connects using alternative Windows credential and sets the Power Plan to High Performance. Skips it if its already set.

    .EXAMPLE
        PS C:\> Set-DbaPowerPlan -ComputerName sqlcluster -CustomPowerPlan 'Maximum Performance'

        Sets the Power Plan to the custom power plan called "Maximum Performance". Skips it if its already set.

       #>
    [CmdletBinding(SupportsShouldProcess)]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseOutputTypeCorrectly", "", Justification = "PSSA Rule Ignored by BOH")]
    param (
        [parameter(ValueFromPipeline)]
        [DbaInstance[]]$ComputerName,
        [PSCredential]$Credential,
        [string]$PowerPlan = 'High Performance',
        [string]$CustomPowerPlan,
        [parameter(ValueFromPipeline)]
        [pscustomobject]$InputObject,
        [switch]$EnableException
    )

    begin {
        if ($CustomPowerPlan) {
            $powerPlanRequested = $CustomPowerPlan
        } else {
            $powerPlanRequested = $PowerPlan
        }
        function Set-DbaPowerPlanInternal {
            [CmdletBinding(SupportsShouldProcess)]
            param (
                [string]$ComputerName,
                [PSCredential]$Credential
            )

            if (Test-Bound -ParameterName Credential) {
                $IncludeCred = $true
            }
            try {
                Write-Message -Level Verbose -Message "Testing connection to $computer"
                $computerResolved = Resolve-DbaNetworkName -ComputerName $computer -Credential $Credential

                $computerResolved = $computerResolved.FullComputerName
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $computer
                return
            }

            $splatDbaCmObject = @{
                ComputerName    = $computerResolved
                EnableException = $true
            }
            if ($IncludeCred) {
                $splatDbaCmObject["Credential"] = $Credential
            }

            try {
                Write-Message -Level Verbose -Message "Getting Power Plan information from $computer."
                $currentplan = Get-DbaCmObject @splatDbaCmObject -ClassName Win32_PowerPlan -Namespace "root\cimv2\power" | Where-Object IsActive -eq 'True'
                $currentplan = $currentplan.ElementName
            } catch {
                if ($_.Exception -match "namespace") {
                    Stop-Function -Message "Can't get Power Plan Info for $computer. Unsupported operating system." -Continue -ErrorRecord $_ -Target $computer
                } else {
                    Stop-Function -Message "Can't get Power Plan Info for $computer. Check logs for more details." -Continue -ErrorRecord $_ -Target $computer
                }
            }

            if ($null -eq $currentplan) {
                # the try/catch above isn't working, so make it silent and handle it here.
                Stop-Function -Message "Cannot get Power Plan for $computer." -Category ConnectionError -ErrorRecord $_ -Target $computer
                return
            }

            $planinfo = [PSCustomObject]@{
                ComputerName      = $computer
                PreviousPowerPlan = $currentplan
                ActivePowerPlan   = $powerPlanRequested
            }
            if ($Pscmdlet.ShouldProcess($powerPlanRequested, "Setting Powerplan on $computer")) {
                if ($powerPlanRequested -ne $currentplan) {
                    if ($Pscmdlet.ShouldProcess($computer, "Changing Power Plan from $CurrentPlan to $powerPlanRequested")) {
                        Write-Message -Level Verbose -Message "Creating CIMSession on $computer over WSMan"
                        if ($IncludeCred) {
                            $cimSession = New-CimSession -ComputerName $computer -ErrorAction SilentlyContinue -Credential $Credential
                        } else {
                            $cimSession = New-CimSession -ComputerName $computer -ErrorAction SilentlyContinue
                        }
                        if (-not $cimSession) {
                            Write-Message -Level Verbose -Message "Creating CIMSession on $computer over WSMan failed. Creating CIMSession on $computer over DCom"
                            $sessionOption = New-CimSessionOption -Protocol DCom
                            if ($IncludeCred) {
                                $cimSession = New-CimSession -ComputerName $computer -SessionOption $sessionoption -ErrorAction SilentlyContinue -Credential $Credential
                            } else {
                                $cimSession = New-CimSession -ComputerName $computer -SessionOption $sessionoption -ErrorAction SilentlyContinue
                            }
                        }
                        if ($cimSession) {
                            Write-Message -Level Verbose -Message "Setting Power Plan to $powerPlanRequested."

                            $cimInstance = Get-CimInstance -Namespace root\cimv2\power -ClassName win32_PowerPlan -Filter "ElementName = '$powerPlanRequested'" -CimSession $CIMSession
                            if ($cimInstance) {
                                $cimResult = Invoke-CimMethod -InputObject $cimInstance[0] -MethodName Activate -CimSession $cimSession
                                if (!$cimResult) {
                                    Stop-Function -Message "Couldn't set the requested Power Plan '$powerPlanRequested' on $computer." -Category ConnectionError -Target $computer
                                    return
                                }
                            } else {
                                Stop-Function -Message "Couldn't find the requested Power Plan '$powerPlanRequested' on $computer." -Category ConnectionError -Target $computer
                                return
                            }
                        } else {
                            Stop-Function -Message "Couldn't set Power Plan on $computer." -Category ConnectionError -ErrorRecord $_ -Target $computer
                            return
                        }
                    }
                } else {
                    if ($Pscmdlet.ShouldProcess($computer, "Stating power plan is already set to $powerPlanRequested, won't change.")) {
                        Write-Message -Level Verbose -Message "PowerPlan on $computer is already set to $powerPlanRequested. Skipping."
                    }
                }

                return $planInfo
            }
        }
    }

    process {
        # uses cim commands
        
        
        if (Test-Bound -ParameterName ComputerName) {
            $InputObject += Get-DbaPowerPlan -ComputerName $ComputerName -Credential $Credential
        }

        foreach ($pplan in $InputObject) {
            $computer = $pplan.ComputerName
            $Credential = $pplan.Credential
            Write-Message -Level Verbose -Message "Calling Set-DbaPowerPlanInternal for $computer"
            if (Test-Bound -ParameterName Credential) {
                $data = Set-DbaPowerPlanInternal -ComputerName $Computer -Credential $Credential
            } else {
                $data = Set-DbaPowerPlanInternal -ComputerName $Computer
            }

            if ($data.Count -gt 1) {
                $data.GetEnumerator() | ForEach-Object {
                    $_
                }
            } else {
                $data
            }
        }
    }
}

tools\dbatools\functions\Set-DbaPrivilege.ps1

function Set-DbaPrivilege {
    <#
    .SYNOPSIS
        Adds the SQL Service account to local privileges on one or more computers.

    .DESCRIPTION
        Adds the SQL Service account to local privileges 'Lock Pages in Memory', 'Instant File Initialization', 'Logon as Batch' on one or more computers.

        Requires Local Admin rights on destination computer(s).

    .PARAMETER ComputerName
        The target SQL Server instance or instances.

    .PARAMETER Credential
        Credential object used to connect to the computer as a different user.

    .PARAMETER Type
        Use this to choose the privilege(s) to which you want to add the SQL Service account.
        Accepts 'IFI', 'LPIM' and/or 'BatchLogon' for local privileges 'Instant File Initialization', 'Lock Pages in Memory' and 'Logon as Batch'.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Privilege
        Author: Klaas Vandenberghe ( @PowerDBAKlaas )

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Set-DbaPrivilege

    .EXAMPLE
        PS C:\> Set-DbaPrivilege -ComputerName sqlserver2014a -Type LPIM,IFI

        Adds the SQL Service account(s) on computer sqlserver2014a to the local privileges 'SeManageVolumePrivilege' and 'SeLockMemoryPrivilege'.

    .EXAMPLE
        PS C:\> 'sql1','sql2','sql3' | Set-DbaPrivilege -Type IFI

        Adds the SQL Service account(s) on computers sql1, sql2 and sql3 to the local privilege 'SeManageVolumePrivilege'.

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [parameter(ValueFromPipeline)]
        [Alias("cn", "host", "Server")]
        [dbainstanceparameter[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [Parameter(Mandatory)]
        [ValidateSet('IFI', 'LPIM', 'BatchLogon')]
        [string[]]$Type,
        [switch][Alias('Silent')]
        $EnableException
    )

    begin {
        $ResolveAccountToSID = @"
function Convert-UserNameToSID ([string] `$Acc ) {
`$objUser = New-Object System.Security.Principal.NTAccount(`"`$Acc`")
`$strSID = `$objUser.Translate([System.Security.Principal.SecurityIdentifier])
`$strSID.Value
}
"@
        $ComputerName = $ComputerName.ComputerName | Select-Object -Unique
    }
    process {
        foreach ($computer in $ComputerName) {
            if ($Pscmdlet.ShouldProcess($computer, "Setting Privilege for SQL Service Account")) {
                try {
                    $null = Test-ElevationRequirement -ComputerName $Computer -Continue
                    if (Test-PSRemoting -ComputerName $Computer) {
                        Write-Message -Level Verbose -Message "Exporting Privileges on $Computer"
                        Invoke-Command2 -Raw -ComputerName $computer -Credential $Credential -ScriptBlock {
                            $temp = ([System.IO.Path]::GetTempPath()).TrimEnd(""); secedit /export /cfg $temp\secpolByDbatools.cfg > $NULL;
                        }
                        Write-Message -Level Verbose -Message "Getting SQL Service Accounts on $computer"
                        $SQLServiceAccounts = (Get-DbaService -ComputerName $computer -Type Engine).StartName
                        if ($SQLServiceAccounts.count -ge 1) {
                            Write-Message -Level Verbose -Message "Setting Privileges on $Computer"
                            Invoke-Command2 -Raw -ComputerName $computer -Credential $Credential -Verbose -ArgumentList $ResolveAccountToSID, $SQLServiceAccounts, $BatchLogon, $IFI, $LPIM -ScriptBlock {
                                [CmdletBinding()]
                                param ($ResolveAccountToSID,
                                    $SQLServiceAccounts,
                                    $BatchLogon,
                                    $IFI,
                                    $LPIM)
                                . ([ScriptBlock]::Create($ResolveAccountToSID))
                                $temp = ([System.IO.Path]::GetTempPath()).TrimEnd("");
                                $tempfile = "$temp\secpolByDbatools.cfg"
                                if ('BatchLogon' -in $Type) {
                                    $BLline = Get-Content $tempfile | Where-Object { $_ -match "SeBatchLogonRight" }
                                    ForEach ($acc in $SQLServiceAccounts) {
                                        $SID = Convert-UserNameToSID -Acc $acc;
                                        if ($BLline -notmatch $SID) {
                                            (Get-Content $tempfile) -replace "SeBatchLogonRight = ", "SeBatchLogonRight = *$SID," |
                                                Set-Content $tempfile
                                            <# DO NOT use Write-Message as this is inside of a script block #>
                                            Write-Verbose "Added $acc to Batch Logon Privileges on $env:ComputerName"
                                        } else {
                                            <# DO NOT use Write-Message as this is inside of a script block #>
                                            Write-Warning "$acc already has Batch Logon Privilege on $env:ComputerName"
                                        }
                                    }
                                }
                                if ('IFI' -in $Type) {
                                    $IFIline = Get-Content $tempfile | Where-Object { $_ -match "SeManageVolumePrivilege" }
                                    ForEach ($acc in $SQLServiceAccounts) {
                                        $SID = Convert-UserNameToSID -Acc $acc;
                                        if ($IFIline -notmatch $SID) {
                                            (Get-Content $tempfile) -replace "SeManageVolumePrivilege = ", "SeManageVolumePrivilege = *$SID," |
                                                Set-Content $tempfile
                                            <# DO NOT use Write-Message as this is inside of a script block #>
                                            Write-Verbose "Added $acc to Instant File Initialization Privileges on $env:ComputerName"
                                        } else {
                                            <# DO NOT use Write-Message as this is inside of a script block #>
                                            Write-Warning "$acc already has Instant File Initialization Privilege on $env:ComputerName"
                                        }
                                    }
                                }
                                if ('LPIM' -in $Type) {
                                    $LPIMline = Get-Content $tempfile | Where-Object { $_ -match "SeLockMemoryPrivilege" }
                                    ForEach ($acc in $SQLServiceAccounts) {
                                        $SID = Convert-UserNameToSID -Acc $acc;
                                        if ($LPIMline -notmatch $SID) {
                                            (Get-Content $tempfile) -replace "SeLockMemoryPrivilege = ", "SeLockMemoryPrivilege = *$SID," |
                                                Set-Content $tempfile
                                            <# DO NOT use Write-Message as this is inside of a script block #>
                                            Write-Verbose "Added $acc to Lock Pages in Memory Privileges on $env:ComputerName"
                                        } else {
                                            <# DO NOT use Write-Message as this is inside of a script block #>
                                            Write-Warning "$acc already has Lock Pages in Memory Privilege on $env:ComputerName"
                                        }
                                    }
                                }
                                $null = secedit /configure /cfg $tempfile /db secedit.sdb /areas USER_RIGHTS /overwrite /quiet
                            } -ErrorAction SilentlyContinue
                            Write-Message -Level Verbose -Message "Removing secpol file on $computer"
                            Invoke-Command2 -Raw -ComputerName $computer -Credential $Credential -ScriptBlock { $temp = ([System.IO.Path]::GetTempPath()).TrimEnd(""); Remove-Item $temp\secpolByDbatools.cfg -Force > $NULL }
                        } else {
                            Write-Message -Level Warning -Message "No SQL Service Accounts found on $Computer"
                        }
                    } else {
                        Write-Message -Level Warning -Message "Failed to connect to $Computer"
                    }
                } catch {
                    Stop-Function -Message "Failure" -ErrorRecord $_ -Target $computer -Continue
                }
            }
        }
    }
}

tools\dbatools\functions\Set-DbaSpConfigure.ps1

function Set-DbaSpConfigure {
    <#
    .SYNOPSIS
        Changes the server level system configuration (sys.configuration/sp_configure) value for a given configuration

    .DESCRIPTION
        This function changes the configured value for sp_configure settings. If the setting is dynamic this setting will be used, otherwise the user will be warned that a restart of SQL is required.
        This is designed to be safe and will not allow for configurations to be set outside of the defined configuration min and max values.
        While it is possible to set below the min, or above the max this can cause serious problems with SQL Server (including startup failures), and so is not permitted.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a
        collection and receive pipeline input

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Name
        The name of the configuration to be set -- Configs is auto-populated for tabbing convenience.

    .PARAMETER Value
        The new value for the configuration

    .PARAMETER InputObject
        Piped objects from Get-DbaSpConfigure

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .NOTES
        Tags: SpConfigure
        Author: Nic Cain, https://sirsql.net/

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Set-DbaSpConfigure

    .EXAMPLE
        PS C:\> Set-DbaSpConfigure -SqlInstance localhost -Name ScanForStartupProcedures -Value 1

        Adjusts the Scan for startup stored procedures configuration value to 1 and notifies the user that this requires a SQL restart to take effect

    .EXAMPLE
        PS C:\> Get-DbaSpConfigure -SqlInstance sql2017, sql2014 -Name XPCmdShellEnabled, IsSqlClrEnabled | Set-DbaSpConfigure -Value $false

        Sets the values for XPCmdShellEnabled and IsSqlClrEnabled on sql2017 and sql2014 to False

    .EXAMPLE
        PS C:\> Set-DbaSpConfigure -SqlInstance localhost -Name XPCmdShellEnabled -Value 1

        Adjusts the xp_cmdshell configuration value to 1.

    .EXAMPLE
        PS C:\> Set-DbaSpConfigure -SqlInstance localhost -Name XPCmdShellEnabled -Value 1 -WhatIf

        Returns information on the action that would be performed. No actual change will be made.

       #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [System.Management.Automation.PSCredential]$SqlCredential,
        [Alias("NewValue", "NewConfig")]
        [int]$Value,
        [Alias("Config", "ConfigName")]
        [string[]]$Name,
        [parameter(ValueFromPipeline)]
        [object[]]$InputObject,
        [switch][Alias('Silent')]
        $EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            $InputObject += Get-DbaSpConfigure -SqlInstance $SqlInstance -SqlCredential $SqlCredential -Name $Name
        }

        foreach ($configobject in $InputObject) {
            $server = $InputObject.Parent
            $currentRunValue = $configobject.RunningValue
            $currentConfigValue = $configobject.ConfiguredValue
            $minValue = $configobject.MinValue
            $maxValue = $configobject.MaxValue
            $isDynamic = $configobject.IsDynamic
            $configuration = $configobject.Name

            #Let us not waste energy setting the value to itself
            if ($currentConfigValue -eq $value) {
                Stop-Function -Message "Value to set is the same as the existing value. No work being performed." -Continue -Target $server -Category InvalidData
            }

            #Going outside the min/max boundary can be done, but it can break SQL, so I don't think allowing that is wise at this juncture
            if ($value -lt $minValue -or $value -gt $maxValue) {
                Stop-Function -Message "Value out of range for $configuration ($minValue <-> $maxValue)" -Continue -Category InvalidArgument
            }

            If ($Pscmdlet.ShouldProcess($SqlInstance, "Adjusting server configuration $configuration from $currentConfigValue to $value.")) {
                try {
                    $server.Configuration.$configuration.ConfigValue = $value
                    $server.Configuration.Alter()

                    [pscustomobject]@{
                        ComputerName  = $server.ComputerName
                        InstanceName  = $server.ServiceName
                        SqlInstance   = $server.DomainInstanceName
                        ConfigName    = $configuration
                        PreviousValue = $currentConfigValue
                        NewValue      = $value
                    }

                    #If it's a dynamic setting we're all clear, otherwise let the user know that SQL needs to be restarted for the change to take
                    if ($isDynamic -eq $false) {
                        Write-Message -Level Warning -Message "Configuration setting $configuration has been set, but restart of SQL Server is required for the new value `"$value`" to be used (old value: `"$currentRunValue`")" -Target $Instance
                    }
                } catch {
                    Stop-Function -Message "Unable to change config setting" -Target $Instance -ErrorRecord $_ -Continue -ContinueLabel main
                }
            }
        }
    }
}

tools\dbatools\functions\Set-DbaSpn.ps1

#ValidationTags#FlowControl,Pipeline#
function Set-DbaSpn {
    <#
    .SYNOPSIS
        Sets an SPN for a given service account in active directory (and also enables delegation to the same SPN by default)

    .DESCRIPTION
        This function will connect to Active Directory and search for an account. If the account is found, it will attempt to add an SPN. Once the SPN is added, the function will also set delegation to that service, unless -NoDelegation is specified. In order to run this function, the credential you provide must have write access to Active Directory.

        Note: This function supports -WhatIf

    .PARAMETER SPN
        The SPN you want to add

    .PARAMETER ServiceAccount
        The account you want the SPN added to

    .PARAMETER Credential
        The credential you want to use to connect to Active Directory to make the changes

    .PARAMETER NoDelegation
        Skips setting the delegation

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER Confirm
        Turns confirmations before changes on or off

    .PARAMETER WhatIf
        Shows what would happen if the command was executed

    .NOTES
        Tags: SPN
        Author: Drew Furgiuele (@pittfurg), http://www.port1433.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Set-DbaSpn

    .EXAMPLE
        PS C:\> Set-DbaSpn -SPN MSSQLSvc\SQLSERVERA.domain.something -ServiceAccount domain\account
        PS C:\> Set-DbaSpn -SPN MSSQLSvc\SQLSERVERA.domain.something -ServiceAccount domain\account -EnableException

        Connects to Active Directory and adds a provided SPN to the given account.
        Connects to Active Directory and adds a provided SPN to the given account, suppressing all error messages and throw exceptions that can be caught instead

    .EXAMPLE
        PS C:\> Set-DbaSpn -SPN MSSQLSvc\SQLSERVERA.domain.something -ServiceAccount domain\account -Credential ad\sqldba

        Connects to Active Directory and adds a provided SPN to the given account. Uses alternative account to connect to AD.

    .EXAMPLE
        PS C:\> Set-DbaSpn -SPN MSSQLSvc\SQLSERVERA.domain.something -ServiceAccount domain\account -NoDelegation

        Connects to Active Directory and adds a provided SPN to the given account, without the delegation.

    .EXAMPLE
        PS C:\> Test-DbaSpn -ComputerName sql2016 | Where { $_.isSet -eq $false } | Set-DbaSpn

        Sets all missing SPNs for sql2016

    .EXAMPLE
        PS C:\> Test-DbaSpn -ComputerName sql2016 | Where { $_.isSet -eq $false } | Set-DbaSpn -WhatIf

        Displays what would happen trying to set all missing SPNs for sql2016

    #>
    [cmdletbinding(SupportsShouldProcess, DefaultParameterSetName = "Default")]
    param (
        [Parameter(Mandatory, ValueFromPipelineByPropertyName)]
        [Alias("RequiredSPN")]
        [string]$SPN,
        [Parameter(Mandatory, ValueFromPipelineByPropertyName)]
        [Alias("InstanceServiceAccount", "AccountName")]
        [string]$ServiceAccount,
        [Parameter(ValueFromPipelineByPropertyName)]
        [PSCredential]$Credential,
        [switch]$NoDelegation,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        #did we find the server account?
        Write-Message -Message "Looking for account $ServiceAccount..." -Level Verbose
        $searchfor = 'User'
        if ($ServiceAccount.EndsWith('$')) {
            $searchfor = 'Computer'
        }
        try {
            $Result = Get-DbaADObject -ADObject $ServiceAccount -Type $searchfor -Credential $Credential -EnableException
        } catch {
            Stop-Function -Message "AD lookup failure. This may be because the domain cannot be resolved for the SQL Server service account ($ServiceAccount). $($_.Exception.Message)" -EnableException $EnableException -InnerErrorRecord $_ -Target $ServiceAccount
        }
        if ($Result.Count -gt 0) {
            try {
                $adentry = $Result.GetUnderlyingObject()
            } catch {
                Stop-Function -Message "The SQL Service account ($ServiceAccount) has been found, but you don't have enough permission to inspect its properties $($_.Exception.Message)" -EnableException $EnableException -InnerErrorRecord $_ -Target $ServiceAccount
            }
        } else {
            Stop-Function -Message "The SQL Service account ($ServiceAccount) has not been found" -EnableException $EnableException -Target $ServiceAccount
        }
        # Cool! Add an SPN
        $delegate = $true
        if ($PSCmdlet.ShouldProcess("$spn", "Adding SPN to service account")) {
            try {
                $null = $adentry.Properties['serviceprincipalname'].Add($spn)
                $status = "Successfully added SPN"
                $adentry.CommitChanges()
                Write-Message -Message "Added SPN $spn to $ServiceAccount" -Level Verbose
                $set = $true
            } catch {
                Write-Message -Message "Could not add SPN. $($_.Exception.Message)" -Level Warning -EnableException $EnableException.ToBool() -ErrorRecord $_ -Target $ServiceAccount
                $set = $false
                $status = "Failed to add SPN"
                $delegate = $false
            }

            [pscustomobject]@{
                Name           = $spn
                ServiceAccount = $ServiceAccount
                Property       = "servicePrincipalName"
                IsSet          = $set
                Notes          = $status
            }
        }

        #if we have the SPN set, we can add the delegation
        if ($delegate) {
            # but only if $NoDelegation is not passed
            if (!$NoDelegation) {
                if ($PSCmdlet.ShouldProcess("$spn", "Adding constrained delegation to service account for SPN")) {
                    try {
                        $null = $adentry.Properties['msDS-AllowedToDelegateTo'].Add($spn)
                        $adentry.CommitChanges()
                        Write-Message -Message "Added kerberos delegation to $spn for $ServiceAccount" -Level Verbose
                        $set = $true
                        $status = "Successfully added constrained delegation"
                    } catch {
                        Write-Message -Message "Could not add delegation. $($_.Exception.Message)" -Level Warning -EnableException $EnableException.ToBool() -ErrorRecord $_ -Target $ServiceAccount
                        $set = $false
                        $status = "Failed to add constrained delegation"
                    }

                    [pscustomobject]@{
                        Name           = $spn
                        ServiceAccount = $ServiceAccount
                        Property       = "msDS-AllowedToDelegateTo"
                        IsSet          = $set
                        Notes          = $status
                    }
                }
            } else {
                Write-Message -Message "Skipping delegation as instructed" -Level Verbose
            }
        }
    }
}

tools\dbatools\functions\Set-DbaStartupParameter.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Set-DbaStartupParameter {
    <#
    .SYNOPSIS
        Sets the Startup Parameters for a SQL Server instance

    .DESCRIPTION
        Modifies the startup parameters for a specified SQL Server Instance

        For full details of what each parameter does, please refer to this MSDN article - https://msdn.microsoft.com/en-us/library/ms190737(v=sql.105).aspx

    .PARAMETER SqlInstance
        The SQL Server instance to be modified

        If the Sql Instance is offline path parameters will be ignored as we cannot test the instance's access to the path. If you want to force this to work then please use the Force switch

    .PARAMETER SqlCredential
        Windows or Sql Login Credential with permission to log into the SQL instance

    .PARAMETER Credential
        Windows Credential with permission to log on to the server running the SQL instance

    .PARAMETER MasterData
        Path to the data file for the Master database

        Will be ignored if SqlInstance is offline or the Offline switch is set. To override this behaviour use the Force switch. This is to ensure you understand the risk as we cannot validate the path if the instance is offline

    .PARAMETER MasterLog
        Path to the log file for the Master database

        Will be ignored if SqlInstance is offline or the Offline switch is set. To override this behaviour use the Force switch. This is to ensure you understand the risk as we cannot validate the path if the instance is offline

    .PARAMETER ErrorLog
        Path to the SQL Server error log file

        Will be ignored if SqlInstance is offline or the Offline switch is set. To override this behaviour use the Force switch. This is to ensure you understand the risk as we cannot validate the path if the instance is offline

    .PARAMETER TraceFlags
        A comma separated list of TraceFlags to be applied at SQL Server startup
        By default these will be appended to any existing trace flags set

    .PARAMETER CommandPromptStart
        Shortens startup time when starting SQL Server from the command prompt. Typically, the SQL Server Database Engine starts as a service by calling the Service Control Manager.
        Because the SQL Server Database Engine does not start as a service when starting from the command prompt

    .PARAMETER MinimalStart
        Starts an instance of SQL Server with minimal configuration. This is useful if the setting of a configuration value (for example, over-committing memory) has
        prevented the server from starting. Starting SQL Server in minimal configuration mode places SQL Server in single-user mode

    .PARAMETER MemoryToReserve
        Specifies an integer number of megabytes (MB) of memory that SQL Server will leave available for memory allocations within the SQL Server process,
        but outside the SQL Server memory pool. The memory outside of the memory pool is the area used by SQL Server for loading items such as extended procedure .dll files,
        the OLE DB providers referenced by distributed queries, and automation objects referenced in Transact-SQL statements. The default is 256 MB.

    .PARAMETER SingleUser
        Start Sql Server in single user mode

    .PARAMETER NoLoggingToWinEvents
        Don't use Windows Application events log

    .PARAMETER StartAsNamedInstance
        Allows you to start a named instance of SQL Server

    .PARAMETER DisableMonitoring
        Disables the following monitoring features:

        SQL Server performance monitor counters
        Keeping CPU time and cache-hit ratio statistics
        Collecting information for the DBCC SQLPERF command
        Collecting information for some dynamic management views
        Many extended-events event points

        ** Warning *\* When you use the -x startup option, the information that is available for you to diagnose performance and functional problems with SQL Server is greatly reduced.

    .PARAMETER SingleUserDetails
        The username for single user

    .PARAMETER IncreasedExtents
        Increases the number of extents that are allocated for each file in a filegroup.

    .PARAMETER TraceFlagsOverride
        Overrides the default behaviour and replaces any existing trace flags. If not trace flags specified will just remove existing ones

    .PARAMETER StartUpConfig
        Pass in a previously saved SQL Instance startup config
        using this parameter will set TraceFlagsOverride to true, so existing Trace Flags will be overridden

    .PARAMETER Offline
        Setting this switch will try perform the requested actions without connect to the SQL Server Instance, this will speed things up if you know the Instance is offline.

        When working offline, path inputs (MasterData, MasterLog and ErrorLog) will be ignored, unless Force is specified

    .PARAMETER Force
        By default we test the values passed in via MasterData, MasterLog, ErrorLog

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Startup, Parameter, Configure
        Author: Stuart Moore (@napalmgram), stuart-moore.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Set-DbaStartupParameter -SqlInstance server1\instance1 -SingleUser

        Will configure the SQL Instance server1\instance1 to startup up in Single User mode at next startup

    .EXAMPLE
        PS C:\> Set-DbaStartupParameter -SqlInstance sql2016 -IncreasedExtents

        Will configure the SQL Instance sql2016 to IncreasedExtents = True (-E)

    .EXAMPLE
        PS C:\> Set-DbaStartupParameter -SqlInstance sql2016  -IncreasedExtents:$false -WhatIf

        Shows what would happen if you attempted to configure the SQL Instance sql2016 to IncreasedExtents = False (no -E)

    .EXAMPLE
        PS C:\> Set-DbaStartupParameter -SqlInstance server1\instance1 -SingleUser -TraceFlags 8032,8048

        This will append Trace Flags 8032 and 8048 to the startup parameters

    .EXAMPLE
        PS C:\> Set-DbaStartupParameter -SqlInstance sql2016 -SingleUser:$false -TraceFlagsOverride

        This will remove all trace flags and set SingleUser to false

    .EXAMPLE
        PS C:\> Set-DbaStartupParameter -SqlInstance server1\instance1 -SingleUser -TraceFlags 8032,8048 -TraceFlagsOverride

        This will set Trace Flags 8032 and 8048 to the startup parameters, removing any existing Trace Flags

    .EXAMPLE
        PS C:\> Set-DbaStartupParameter -SqlInstance sql2016 -SingleUser:$false -TraceFlagsOverride -Offline

        This will remove all trace flags and set SingleUser to false from an offline instance

    .EXAMPLE
        PS C:\> Set-DbaStartupParameter -SqlInstance sql2016 -ErrorLog c:\Sql\ -Offline

        This will attempt to change the ErrorLog path to c:\sql\. However, with the offline switch this will not happen. To force it, use the -Force switch like so:

        Set-DbaStartupParameter -SqlInstance sql2016 -ErrorLog c:\Sql\ -Offline -Force

    .EXAMPLE
        PS C:\> $StartupConfig = Get-DbaStartupParameter -SqlInstance server1\instance1
        PS C:\> Set-DbaStartupParameter -SqlInstance server1\instance1 -SingleUser -NoLoggingToWinEvents
        PS C:\> #Restart your SQL instance with the tool of choice
        PS C:\> #Do Some work
        PS C:\> Set-DbaStartupParameter -SqlInstance server1\instance1 -StartUpConfig $StartUpConfig
        PS C:\> #Restart your SQL instance with the tool of choice and you're back to normal

        In this example we take a copy of the existing startup configuration of server1\instance1

        We then change the startup parameters ahead of some work

        After the work has been completed, we can push the original startup parameters back to server1\instance1 and resume normal operation

#>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "High")]
    param ([parameter(Mandatory)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter]$SqlInstance,
        [PSCredential]$SqlCredential,
        [PSCredential]$Credential,
        [string]$MasterData,
        [string]$MasterLog,
        [string]$ErrorLog,
        [string[]]$TraceFlags,
        [switch]$CommandPromptStart,
        [switch]$MinimalStart,
        [int]$MemoryToReserve,
        [switch]$SingleUser,
        [string]$SingleUserDetails,
        [switch]$NoLoggingToWinEvents,
        [switch]$StartAsNamedInstance,
        [switch]$DisableMonitoring,
        [switch]$IncreasedExtents,
        [switch]$TraceFlagsOverride,
        [object]$StartUpConfig,
        [switch]$Offline,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )
    process {

        if (-not $Offline) {
            try {
                $server = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential
            } catch {
                Write-Message -Level Warning -Message "Failed to connect to $SqlInstance, will try to work with just WMI. Path options will be ignored unless Force was indicated"
                $Server = $SqlInstance
                $Offline = $true
            }
        } else {
            Write-Message -Level Verbose -Message "Offline switch set, proceeding with just WMI"
            $Server = $SqlInstance
        }

        #Get Current parameters:
        $currentstartup = Get-DbaStartupParameter -SqlInstance $SqlInstance -Credential $Credential
        $originalparamstring = $currentstartup.ParameterString

        Write-Message -Level Verbose -Message "Original startup parameter string: $originalparamstring"

        if ('startUpconfig' -in $PsBoundParameters.keys) {
            Write-Message -Level VeryVerbose -Message "StartupObject passed in"
            $newstartup = $StartUpConfig
            $TraceFlagsOverride = $true
        } else {
            Write-Message -Level VeryVerbose -Message "Parameters passed in"
            $newstartup = $currentstartup.PSObject.copy()
            foreach ($param in ($PsBoundParameters.keys | Where-Object { $_ -in ($newstartup.PSObject.Properties.name) })) {
                if ($PsBoundParameters.item($param) -ne $newstartup.$param) {
                    $newstartup.$param = $PsBoundParameters.item($param)
                }
            }
        }

        if (!($currentstartup.SingleUser)) {

            if ($newstartup.Masterdata.length -gt 0) {
                if ($Offline -and -not $Force) {
                    Write-Message -Level Warning -Message "Working offline, skipping untested MasterData path"
                    $ParameterString += "-d$($CurrentStartup.MasterData);"

                } else {
                    if ($Force) {
                        $ParameterString += "-d$($newstartup.MasterData);"
                    } elseif (Test-DbaPath -SqlInstance $server -SqlCredential $SqlCredential -Path (Split-Path $newstartup.MasterData -Parent)) {
                        $ParameterString += "-d$($newstartup.MasterData);"
                    } else {
                        Stop-Function -Message "Specified folder for Master Data file is not reachable by instance $SqlInstance"
                        return
                    }
                }
            } else {
                Stop-Function -Message "MasterData value must be provided"
                return
            }

            if ($newstartup.ErrorLog.length -gt 0) {
                if ($Offline -and -not $Force) {
                    Write-Message -Level Warning -Message "Working offline, skipping untested ErrorLog path"
                    $ParameterString += "-e$($CurrentStartup.ErrorLog);"
                } else {
                    if ($Force) {
                        $ParameterString += "-e$($newstartup.ErrorLog);"
                    } elseif (Test-DbaPath -SqlInstance $server -SqlCredential $SqlCredential -Path (Split-Path $newstartup.ErrorLog -Parent)) {
                        $ParameterString += "-e$($newstartup.ErrorLog);"
                    } else {
                        Stop-Function -Message "Specified folder for ErrorLog  file is not reachable by $SqlInstance"
                        return
                    }
                }
            } else {
                Stop-Function -Message "ErrorLog value must be provided"
                return
            }

            if ($newstartup.MasterLog.Length -gt 0) {
                if ($offline -and -not $Force) {
                    Write-Message -Level Warning -Message "Working offline, skipping untested MasterLog path"
                    $ParameterString += "-l$($CurrentStartup.MasterLog);"
                } else {
                    if ($Force) {
                        $ParameterString += "-l$($newstartup.MasterLog);"
                    } elseif (Test-DbaPath -SqlInstance $server -SqlCredential $SqlCredential -Path (Split-Path $newstartup.MasterLog -Parent)) {
                        $ParameterString += "-l$($newstartup.MasterLog);"
                    } else {
                        Stop-Function -Message "Specified folder for Master Log  file is not reachable by $SqlInstance"
                        return
                    }
                }
            } else {
                Stop-Function -Message "MasterLog value must be provided."
                return
            }
        } else {

            Write-Message -Level Verbose -Message "Sql instance is presently configured for single user, skipping path validation"
            if ($newstartup.MasterData.Length -gt 0) {
                $ParameterString += "-d$($newstartup.MasterData);"
            } else {
                Stop-Function -Message "Must have a value for MasterData"
                return
            }
            if ($newstartup.ErrorLog.Length -gt 0) {
                $ParameterString += "-e$($newstartup.ErrorLog);"
            } else {
                Stop-Function -Message "Must have a value for Errorlog"
                return
            }
            if ($newstartup.MasterLog.Length -gt 0) {
                $ParameterString += "-l$($newstartup.MasterLog);"
            } else {
                Stop-Function -Message "Must have a value for MsterLog"
                return
            }
        }

        if ($newstartup.CommandPromptStart) {
            $ParameterString += "-c;"
        }
        if ($newstartup.MinimalStart) {
            $ParameterString += "-f;"
        }
        if ($newstartup.MemoryToReserve -notin ($null, 0)) {
            $ParameterString += "-g$($newstartup.MemoryToReserve)"
        }
        if ($newstartup.SingleUser) {
            if ($SingleUserDetails.length -gt 0) {
                if ($SingleUserDetails -match ' ') {
                    $SingleUserDetails = """$SingleUserDetails"""
                }
                $ParameterString += "-m$SingleUserDetails;"
            } else {
                $ParameterString += "-m;"
            }
        }
        if ($newstartup.NoLoggingToWinEvents) {
            $ParameterString += "-n;"
        }
        If ($newstartup.StartAsNamedInstance) {
            $ParameterString += "-s;"
        }
        if ($newstartup.DisableMonitoring) {
            $ParameterString += "-x;"
        }
        if ($newstartup.IncreasedExtents) {
            $ParameterString += "-E;"
        }
        if ($newstartup.TraceFlags -eq 'None') {
            $newstartup.TraceFlags = ''
        }
        if ($TraceFlagsOverride -and 'TraceFlags' -in $PsBoundParameters.keys) {
            if ($null -ne $TraceFlags -and '' -ne $TraceFlags) {
                $newstartup.TraceFlags = $TraceFlags -join ','
                $ParameterString += (($TraceFlags.split(',') | ForEach-Object { "-T$_" }) -join ';') + ";"
            }
        } else {
            if ('TraceFlags' -in $PsBoundParameters.keys) {
                if ($null -eq $TraceFlags) { $TraceFlags = '' }
                $oldflags = @($currentstartup.TraceFlags) -split ',' | Where-Object { $_ -ne 'None' }
                $newflags = $TraceFlags
                $newstartup.TraceFlags = (@($oldFlags) + @($newflags) | Sort-Object -Unique) -join ','
            } elseif ($TraceFlagsOverride) {
                $newstartup.TraceFlags = ''
            } else {
                $newstartup.TraceFlags = if ($currentstartup.TraceFlags -eq 'None') { }
                else { $currentstartup.TraceFlags -join ',' }
            }
            If ($newstartup.TraceFlags.Length -ne 0) {
                $ParameterString += (($newstartup.TraceFlags.split(',') | ForEach-Object { "-T$_" }) -join ';') + ";"
            }
        }

        $instance = $SqlInstance.ComputerName
        $instancename = $SqlInstance.InstanceName

        if ($instancename.Length -eq 0) { $instancename = "MSSQLSERVER" }

        $displayname = "SQL Server ($instancename)"

        $Scriptblock = {
            #Variable marked as unused by PSScriptAnalyzer
            #$instance = $args[0]
            $displayname = $args[1]
            $ParameterString = $args[2]

            $wmisvc = $wmi.Services | Where-Object { $_.DisplayName -eq $displayname }
            $wmisvc.StartupParameters = $ParameterString
            $wmisvc.Alter()
            $wmisvc.Refresh()
            if ($wmisvc.StartupParameters -eq $ParameterString) {
                $true
            } else {
                $false
            }
        }

        if ($pscmdlet.ShouldProcess("Setting Sql Server start parameters on $SqlInstance to $ParameterString")) {
            try {
                if ($Credential) {
                    #Variable $response marked as unused by PSScriptAnalyzer replace with $null to catch output
                    $null = Invoke-ManagedComputerCommand -ComputerName $server.ComputerName -Credential $Credential -ScriptBlock $Scriptblock -ArgumentList $server.ComputerName, $displayname, $ParameterString -EnableException
                    $output = Get-DbaStartupParameter -SqlInstance $server.ComputerName -Credential $Credential -EnableException
                    Add-Member -Force -InputObject $output -MemberType NoteProperty -Name OriginalStartupParameters -Value $originalparamstring
                } else {
                    #Variable $response marked as unused by PSScriptAnalyzer replace with $null to catch output
                    $null = Invoke-ManagedComputerCommand -ComputerName $server.ComputerName -ScriptBlock $Scriptblock -ArgumentList $server.ComputerName, $displayname, $ParameterString -EnableException
                    $output = Get-DbaStartupParameter -SqlInstance $server.ComputerName -EnableException
                    Add-Member -Force -InputObject $output -MemberType NoteProperty -Name OriginalStartupParameters -Value $originalparamstring
                    Add-Member -Force -InputObject $output -MemberType NoteProperty -Name Notes -Value "Startup parameters changed on $SqlInstance. You must restart SQL Server for changes to take effect."
                }

                $output
            } catch {
                Stop-Function -Message "Startup parameters failed to change on $SqlInstance. " -Target $SqlInstance -ErrorRecord $_
                return
            }
        }
    }
}

tools\dbatools\functions\Set-DbaTcpPort.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Set-DbaTcpPort {
    <#
    .SYNOPSIS
        Changes the TCP port used by the specified SQL Server.

    .DESCRIPTION
        This function changes the TCP port used by the specified SQL Server.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Credential object used to connect to the SQL Server instance as a different user

    .PARAMETER Credential
        Credential object used to connect to the Windows server itself as a different user (like SQL Configuration Manager)

    .PARAMETER Port
        TCPPort that SQLService should listen on.

    .PARAMETER IpAddress
        Which IpAddress should the portchange , if omitted allip (0.0.0.0) will be changed with the new port number.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .NOTES
        Tags: Service, Port, TCP, Configure
        Author: @H0s0n77
        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Set-DbaTcpPort

    .EXAMPLE
        PS C:\> Set-DbaTcpPort -SqlInstance sql2017 -Port 1433

        Sets the port number 1433 for all IP Addresses on the default instance on sql2017. Prompts for confirmation.

    .EXAMPLE
        PS C:\> Set-DbaTcpPort -SqlInstance winserver\sqlexpress -IpAddress 192.168.1.22 -Port 1433 -Confirm:$false

        Sets the port number 1433 for IP 192.168.1.22 on the sqlexpress instance on winserver. Does not prompt for confirmation.

    .EXAMPLE
        PS C:\> Set-DbaTcpPort -SqlInstance sql2017, sql2019 -port 1337 -Credential ad\dba

        Sets the port number 1337 for all IP Addresses on SqlInstance sql2017 and sql2019 using the credentials for ad\dba. Prompts for confirmation.

       #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "High")]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$Credential,
        [parameter(Mandatory)]
        [ValidateRange(1, 65535)]
        [int]$Port,
        [IpAddress[]]$IpAddress,
        [switch]$EnableException
    )

    begin {
        if (-not $IpAddress) {
            $IpAddress = '0.0.0.0'
        } else {
            if ($SqlInstance.Count -gt 1) {
                Stop-Function -Message "-IpAddress switch cannot be used with a collection of serveraddresses" -Target $SqlInstance
                return
            }
        }
        $scriptblock = {
            $computername = $args[0]
            $wmiinstancename = $args[1]
            $port = $args[2]
            $IpAddress = $args[3]
            $sqlinstanceName = $args[4]

            $wmi = New-Object Microsoft.SqlServer.Management.Smo.Wmi.ManagedComputer $computername
            $wmiinstance = $wmi.ServerInstances | Where-Object {
                $_.Name -eq $wmiinstancename
            }
            $tcp = $wmiinstance.ServerProtocols | Where-Object {
                $_.DisplayName -eq 'TCP/IP'
            }
            $IpAddress = $tcp.IpAddresses | where-object {
                $_.IpAddress -eq $IpAddress
            }
            $tcpport = $IpAddress.IpAddressProperties | Where-Object {
                $_.Name -eq 'TcpPort'
            }

            $oldport = $tcpport.Value
            try {
                $tcpport.value = $port
                $tcp.Alter()
                [pscustomobject]@{
                    ComputerName       = $computername
                    InstanceName       = $wmiinstancename
                    SqlInstance        = $sqlinstanceName
                    PreviousPortNumber = $oldport
                    PortNumber         = $Port
                    Status             = "Success"
                }
            } catch {
                [pscustomobject]@{
                    ComputerName       = $computername
                    InstanceName       = $wmiinstancename
                    SqlInstance        = $sqlinstanceName
                    PreviousPortNumber = $oldport
                    PortNumber         = $Port
                    Status             = "Failed: $_"
                }
            }
        }
    }
    process {
        if (Test-FunctionInterrupt) {
            return
        }

        foreach ($instance in $SqlInstance) {
            $wmiinstancename = $instance.InstanceName
            $computerName = $instance.ComputerName

            if ($Pscmdlet.ShouldProcess($computerName, "Setting port to $Port for $wmiinstancename")) {
                try {
                    $computerName = $instance.ComputerName
                    $resolved = Resolve-DbaNetworkName -ComputerName $computerName
                    Invoke-ManagedComputerCommand -ComputerName $resolved.FullComputerName -ScriptBlock $scriptblock -ArgumentList $instance.ComputerName, $wmiinstancename, $port, $IpAddress, $instance.InputObject -Credential $Credential
                } catch {
                    try {
                        Invoke-ManagedComputerCommand -ComputerName $instance.ComputerName -ScriptBlock $scriptblock -ArgumentList $instance.ComputerName, $wmiinstancename, $port, $IpAddress, $instance.InputObject -Credential $Credential
                    } catch {
                        Stop-Function -Message "Failure setting port to $Port for $wmiinstancename on $computerName" -Continue
                    }
                }
            }
        }
    }
}

tools\dbatools\functions\Set-DbaTempDbConfig.ps1

function Set-DbaTempdbConfig {
    <#
    .SYNOPSIS
        Sets tempdb data and log files according to best practices.

    .DESCRIPTION
        Calculates tempdb size and file configurations based on passed parameters, calculated values, and Microsoft best practices. User must declare SQL Server to be configured and total data file size as mandatory values. Function then calculates the number of data files based on logical cores on the target host and create evenly sized data files based on the total data size declared by the user, with a log file 25% of the total data file size.

        Other parameters can adjust the settings as the user desires (such as different file paths, number of data files, and log file size). No functions that shrink or delete data files are performed. If you wish to do this, you will need to resize tempdb so that it is "smaller" than what the function will size it to before running the function.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER DataFileCount
        Specifies the number of data files to create. If this number is not specified, the number of logical cores of the host will be used.

    .PARAMETER DataFileSize
        Specifies the total data file size in megabytes. This is distributed across the total number of data files.

    .PARAMETER LogFileSize
        Specifies the log file size in megabytes. If not specified, this will be set to 25% of total data file size.

    .PARAMETER DataFileGrowth
        Specifies the growth amount for the data file(s) in megabytes. The default is 512 MB.

    .PARAMETER LogFileGrowth
        Specifies the growth amount for the log file in megabytes. The default is 512 MB.

    .PARAMETER DataPath
        Specifies the filesystem path in which to create the tempdb data files. If not specified, current tempdb location will be used.

    .PARAMETER LogPath
        Specifies the filesystem path in which to create the tempdb log file. If not specified, current tempdb location will be used.

    .PARAMETER OutputScriptOnly
        If this switch is enabled, only the T-SQL script to change the tempdb configuration is created and output.

    .PARAMETER OutFile
        Specifies the filesystem path into which the generated T-SQL script will be saved.

    .PARAMETER DisableGrowth
        If this switch is enabled, the tempdb files will be configured to not grow. This overrides -DataFileGrowth and -LogFileGrowth.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Tempdb, Space, Configure, Configuration
        Author: Michael Fal (@Mike_Fal), http://mikefal.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Set-DbaTempdbConfig

    .EXAMPLE
        PS C:\> Set-DbaTempdbConfig -SqlInstance localhost -DataFileSize 1000

        Creates tempdb with a number of data files equal to the logical cores where each file is equal to 1000MB divided by the number of logical cores, with a log file of 250MB.

    .EXAMPLE
        PS C:\> Set-DbaTempdbConfig -SqlInstance localhost -DataFileSize 1000 -DataFileCount 8

        Creates tempdb with 8 data files, each one sized at 125MB, with a log file of 250MB.

    .EXAMPLE
        PS C:\> Set-DbaTempdbConfig -SqlInstance localhost -DataFileSize 1000 -OutputScriptOnly

        Provides a SQL script output to configure tempdb according to the passed parameters.

    .EXAMPLE
        PS C:\> Set-DbaTempdbConfig -SqlInstance localhost -DataFileSize 1000 -DisableGrowth

        Disables the growth for the data and log files.

    .EXAMPLE
        PS C:\> Set-DbaTempdbConfig -SqlInstance localhost -DataFileSize 1000 -OutputScriptOnly

        Returns the T-SQL script representing tempdb configuration.

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'Medium')]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseOutputTypeCorrectly", "", Justification = "PSSA Rule Ignored by BOH")]
    param (
        [parameter(Mandatory)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [int]$DataFileCount,
        [Parameter(Mandatory)]
        [int]$DataFileSize,
        [int]$LogFileSize,
        [int]$DataFileGrowth = 512,
        [int]$LogFileGrowth = 512,
        [string]$DataPath,
        [string]$LogPath,
        [string]$OutFile,
        [switch]$OutputScriptOnly,
        [switch]$DisableGrowth,
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 9

            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $cores = $server.Processors
            if ($cores -gt 8) {
                $cores = 8
            }

            #Set DataFileCount if not specified. If specified, check against best practices.
            if (-not $DataFileCount) {
                $DataFileCount = $cores
                Write-Message -Message "Data file count set to number of cores: $DataFileCount" -Level Verbose
            } else {
                if ($DataFileCount -gt $cores) {
                    Write-Message -Message "Data File Count of $DataFileCount exceeds the Logical Core Count of $cores. This is outside of best practices." -Level Warning
                }
                Write-Message -Message "Data file count set explicitly: $DataFileCount" -Level Verbose
            }

            $DataFilesizeSingle = $([Math]::Floor($DataFileSize / $DataFileCount))
            Write-Message -Message "Single data file size (MB): $DataFilesizeSingle." -Level Verbose

            if (Test-Bound -ParameterName DataPath) {
                if ((Test-DbaPath -SqlInstance $server -Path $DataPath) -eq $false) {
                    Stop-Function -Message "$datapath is an invalid path." -Continue
                }
            } else {
                $Filepath = $server.Databases['tempdb'].ExecuteWithResults('SELECT physical_name as FileName FROM sys.database_files WHERE file_id = 1').Tables[0].Rows[0].FileName
                $DataPath = Split-Path $Filepath
            }

            Write-Message -Message "Using data path: $datapath." -Level Verbose

            if (Test-Bound -ParameterName LogPath) {
                if ((Test-DbaPath -SqlInstance $server -Path $LogPath) -eq $false) {
                    Stop-Function -Message "$LogPath is an invalid path." -Continue
                }
            } else {
                $Filepath = $server.Databases['tempdb'].ExecuteWithResults('SELECT physical_name as FileName FROM sys.database_files WHERE file_id = 2').Tables[0].Rows[0].FileName
                $LogPath = Split-Path $Filepath
            }
            Write-Message -Message "Using log path: $LogPath." -Level Verbose

            # Check if the file growth needs to be disabled
            if ($DisableGrowth) {
                $DataFileGrowth = 0
                $LogFileGrowth = 0
            }

            # Check current tempdb. Throw an error if current tempdb is larger than config.
            $CurrentFileCount = $server.Databases['tempdb'].ExecuteWithResults('SELECT count(1) as FileCount FROM sys.database_files WHERE type=0').Tables[0].Rows[0].FileCount
            $TooBigCount = $server.Databases['tempdb'].ExecuteWithResults("SELECT TOP 1 (size/128) as Size FROM sys.database_files WHERE size/128 > $DataFilesizeSingle AND type = 0").Tables[0].Rows[0].Size

            if ($CurrentFileCount -gt $DataFileCount) {
                Stop-Function -Message "Current tempdb in $instance is not suitable to be reconfigured. The current tempdb has a greater number of files ($CurrentFileCount) than the calculated configuration ($DataFileCount)." -Continue
            }

            if ($TooBigCount) {
                Stop-Function -Message "Current tempdb in $instance is not suitable to be reconfigured. The current tempdb ($TooBigCount MB) is larger than the calculated individual file configuration ($DataFilesizeSingle MB)." -Continue
            }

            $EqualCount = $server.Databases['tempdb'].ExecuteWithResults("SELECT count(1) as FileCount FROM sys.database_files WHERE size/128 = $DataFilesizeSingle AND type = 0").Tables[0].Rows[0].FileCount

            Write-Message -Message "tempdb configuration validated." -Level Verbose

            $DataFiles = $server.Databases['tempdb'].ExecuteWithResults("select f.name as Name, f.physical_name as FileName from sys.filegroups fg join sys.database_files f on fg.data_space_id = f.data_space_id where fg.name = 'PRIMARY' and f.type_desc = 'ROWS'").Tables[0];

            #Checks passed, process reconfiguration
            for ($i = 0; $i -lt $DataFileCount; $i++) {
                $File = $DataFiles.Rows[$i]
                if ($File) {
                    $Filename = Split-Path $File.FileName -Leaf
                    $LogicalName = $File.Name
                    $NewPath = "$datapath\$Filename"
                    $sql += "ALTER DATABASE tempdb MODIFY FILE(name=$LogicalName,filename='$NewPath',size=$DataFilesizeSingle MB,filegrowth=$DataFileGrowth);"
                } else {
                    $NewName = "tempdev$i.ndf"
                    $NewPath = "$datapath\$NewName"
                    $sql += "ALTER DATABASE tempdb ADD FILE(name=tempdev$i,filename='$NewPath',size=$DataFilesizeSingle MB,filegrowth=$DataFileGrowth);"
                }
            }

            if (-not $LogFileSize) {
                $LogFileSize = [Math]::Floor($DataFileSize / 4)
            }

            $logfile = $server.Databases['tempdb'].ExecuteWithResults("SELECT name, physical_name as FileName FROM sys.database_files WHERE file_id = 2").Tables[0].Rows[0];
            $Filename = Split-Path $logfile.FileName -Leaf
            $LogicalName = $logfile.Name
            $NewPath = "$LogPath\$Filename"
            $sql += "ALTER DATABASE tempdb MODIFY FILE(name=$LogicalName,filename='$NewPath',size=$LogFileSize MB,filegrowth=$LogFileGrowth);"

            Write-Message -Message "SQL Statement to resize tempdb." -Level Verbose
            Write-Message -Message ($sql -join "`n`n") -Level Verbose

            if ($OutputScriptOnly) {
                return $sql
            } elseif ($OutFile) {
                $sql | Set-Content -Path $OutFile
            } else {
                if ($Pscmdlet.ShouldProcess($instance, "Executing query and informing that a restart is required.")) {
                    try {
                        $server.Databases['master'].ExecuteNonQuery($sql)
                        Write-Message -Level Verbose -Message "tempdb successfully reconfigured."

                        [PSCustomObject]@{
                            ComputerName       = $server.ComputerName
                            InstanceName       = $server.ServiceName
                            SqlInstance        = $server.DomainInstanceName
                            DataFileCount      = $DataFileCount
                            DataFileSize       = [dbasize]($DataFileSize * 1024 * 1024)
                            SingleDataFileSize = [dbasize]($DataFilesizeSingle * 1024 * 1024)
                            LogSize            = [dbasize]($LogFileSize * 1024 * 1024)
                            DataPath           = $DataPath
                            LogPath            = $LogPath
                            DataFileGrowth     = [dbasize]($DataFileGrowth * 1024 * 1024)
                            LogFileGrowth      = [dbasize]($LogFileGrowth * 1024 * 1024)
                        }

                        Write-Message -Level Output -Message "tempdb reconfigured. You must restart the SQL Service for settings to take effect."
                    } catch {
                        Stop-Function -Message "Unable to reconfigure tempdb. Exception: $_" -Target $sql -ErrorRecord $_ -Continue
                    }
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Set-SqlTempDbConfiguration
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Set-DbaTempDbConfiguration
    }
}

tools\dbatools\functions\Show-DbaDbList.ps1

function Show-DbaDbList {
    <#
    .SYNOPSIS
        Shows a list of databases in a GUI.

    .DESCRIPTION
        Shows a list of databases in a GUI. Returns a string holding the name of the selected database. Hitting cancel returns null.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances..

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Title
        Title of the window being displayed. Default is "Select Database".

    .PARAMETER Header
        Header text displayed above the database listing. Default is "Select the database:".

    .PARAMETER DefaultDb
        Specify a database to have selected when the window appears.

    .NOTES
        Tags: Database, FileSystem
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Show-DbaDbList

    .EXAMPLE
        PS C:\> Show-DbaDbList -SqlInstance sqlserver2014a

        Shows a GUI list of databases using Windows Authentication to connect to the SQL Server. Returns a string of the selected database.

    .EXAMPLE
        PS C:\> Show-DbaDbList -SqlInstance sqlserver2014a -SqlCredential $cred

        Shows a GUI list of databases using SQL credentials to connect to the SQL Server. Returns a string of the selected database.

    .EXAMPLE
        PS C:\> Show-DbaDbList -SqlInstance sqlserver2014a -DefaultDb master

        Shows a GUI list of databases using Windows Authentication to connect to the SQL Server. The "master" database will be selected when the lists shows. Returns a string of the selected database.

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string]$Title = "Select Database",
        [string]$Header = "Select the database:",
        [string]$DefaultDb
    )

    begin {
        try {
            Add-Type -AssemblyName PresentationFramework
        } catch {
            throw "Windows Presentation Framework required but not installed"
        }

        function Add-TreeItem {
            param (
                [string]$name,
                [object]$parent,
                [string]$tag
            )

            $childitem = New-Object System.Windows.Controls.TreeViewItem
            $textblock = New-Object System.Windows.Controls.TextBlock
            $textblock.Margin = "5,0"
            $stackpanel = New-Object System.Windows.Controls.StackPanel
            $stackpanel.Orientation = "Horizontal"
            $image = New-Object System.Windows.Controls.Image
            $image.Height = 20
            $image.Width = 20
            $image.Stretch = "Fill"
            $image.Source = $dbicon
            $textblock.Text = $name
            $childitem.Tag = $name

            if ($name -eq $DefaultDb) {
                $childitem.IsSelected = $true
                $script:selected = $name
            }

            [void]$stackpanel.Children.Add($image)
            [void]$stackpanel.Children.Add($textblock)

            $childitem.Header = $stackpanel
            [void]$parent.Items.Add($childitem)
        }

        function Convert-b64toimg {
            param ($base64)

            $bitmap = New-Object System.Windows.Media.Imaging.BitmapImage
            $bitmap.BeginInit()
            $bitmap.StreamSource = [System.IO.MemoryStream][System.Convert]::FromBase64String($base64)
            $bitmap.EndInit()
            $bitmap.Freeze()
            return $bitmap
        }

        $dbicon = Convert-b64toimg "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"
        $foldericon = Convert-b64toimg "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"
        $dbatoolsicon = Convert-b64toimg "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"

        $sourceserver = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential
    }

    process {
        # Create XAML form in Visual Studio, ensuring the ListView looks chromeless
        [xml]$xaml = "<Window
        xmlns='http://schemas.microsoft.com/winfx/2006/xaml/presentation'
        xmlns:x='http://schemas.microsoft.com/winfx/2006/xaml'
        Title='$Title' SizeToContent='WidthAndHeight' Background='#F0F0F0'
        WindowStartupLocation='CenterScreen' MaxHeight='600'>
    <Grid>
        <TreeView Name='treeview' Height='Auto' Width='Auto' Background='#FFFFFF' BorderBrush='#FFFFFF' Foreground='#FFFFFF' Margin='11,36,11,79'/>
        <Label x:Name='label' Content='$header' HorizontalAlignment='Left' Margin='15,4,10,0' VerticalAlignment='Top'/>
        <StackPanel HorizontalAlignment='Right' Orientation='Horizontal' VerticalAlignment='Bottom' Margin='0,50,10,30'>
        <Button Name='okbutton' Content='OK'  Margin='0,0,0,0' Width='75'/>
        <Label Width='10'/>
        <Button Name='cancelbutton' Content='Cancel' Margin='0,0,0,0' Width='75'/>
    </StackPanel>
</Grid>
</Window>"
        #second pushes it down
        # Turn XAML into PowerShell objects
        $window = [Windows.Markup.XamlReader]::Load((New-Object System.Xml.XmlNodeReader $xaml))
        $window.icon = $dbatoolsicon

        $xaml.SelectNodes("//*[@Name]") | ForEach-Object { Set-Variable -Name ($_.Name) -Value $window.FindName($_.Name) -Scope Script }

        $childitem = New-Object System.Windows.Controls.TreeViewItem
        $textblock = New-Object System.Windows.Controls.TextBlock
        $textblock.Margin = "5,0"
        $stackpanel = New-Object System.Windows.Controls.StackPanel
        $stackpanel.Orientation = "Horizontal"
        $image = New-Object System.Windows.Controls.Image
        $image.Height = 20
        $image.Width = 20
        $image.Stretch = "Fill"
        $image.Source = $foldericon
        $textblock.Text = "Databases"
        $childitem.Tag = "Databases"
        $childitem.isExpanded = $true
        [void]$stackpanel.Children.Add($image)
        [void]$stackpanel.Children.Add($textblock)
        $childitem.Header = $stackpanel
        #Variable marked as unused by PSScriptAnalyzer
        #$databaseParent = $treeview.Items.Add($childitem)

        try {
            $databases = $sourceserver.databases.name
        } catch {
            return
        }

        foreach ($database in $databases) {
            Add-TreeItem -Name $database -Parent $childitem -Tag $nameSpace
        }

        $okbutton.Add_Click( {
                $window.Close()
                $script:okay = $true
            })

        $cancelbutton.Add_Click( {
                $script:selected = $null
                $window.Close()
            })

        $window.Add_SourceInitialized( {
                [System.Windows.RoutedEventHandler]$Event = {
                    if ($_.OriginalSource -is [System.Windows.Controls.TreeViewItem]) {
                        $script:selected = $_.OriginalSource.Tag
                    }
                }
                $treeview.AddHandler([System.Windows.Controls.TreeViewItem]::SelectedEvent, $Event)
            })

        $null = $window.ShowDialog()
    }

    end {
        if ($script:selected.length -gt 0 -and $script:okay -eq $true) {
            return $script:selected
        }

        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Show-SqlDatabaseList
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Show-DbaDatabaseList
    }
}

tools\dbatools\functions\Show-DbaServerFileSystem.ps1

#ValidationTags#CodeStyle,Messaging,FlowControl,Pipeline#
function Show-DbaServerFileSystem {
    <#
    .SYNOPSIS
        Shows file system on remote SQL Server in a local GUI and returns the selected directory name

    .DESCRIPTION
        Similar to the remote file system popup you see when browsing a remote SQL Server in SQL Server Management Studio, this function allows you to traverse the remote SQL Server's file structure.

        Show-DbaServerFileSystem uses SQL Management Objects to browse the directories and what you see is limited to the permissions of the account running the command.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. Defaults to localhost.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Storage, FileSystem
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Show-DbaServerFileSystem

    .EXAMPLE
        PS C:\> Show-DbaServerFileSystem -SqlInstance sql2017

        Shows a list of databases using Windows Authentication to connect to the SQL Server. Returns a string of the selected path.

    .EXAMPLE
        PS C:\> Show-DbaServerFileSystem -SqlInstance sql2017 -SqlCredential $cred

        Shows a list of databases using SQL credentials to connect to the SQL Server. Returns a string of the selected path.

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [DbaInstanceParameter]$SqlInstance,
        [PSCredential]$SqlCredential,
        [switch]$EnableException
    )
    begin {
        try {
            Add-Type -AssemblyName PresentationFramework
        } catch {
            Stop-Function -Message "Windows Presentation Framework required but not installed."
            return
        }

        function Add-TreeItem {
            param (
                [string]$name,
                [object]$parent,
                [string]$tag
            )

            $childitem = New-Object System.Windows.Controls.TreeViewItem

            $textblock = New-Object System.Windows.Controls.TextBlock
            $textblock.Margin = "5,0"

            $stackpanel = New-Object System.Windows.Controls.StackPanel
            $stackpanel.Orientation = "Horizontal"

            $image = New-Object System.Windows.Controls.Image
            $image.Height = 20
            $image.Width = 20
            $image.Stretch = "Fill"

            if ($name.length -eq 1) {
                $image.Source = $diskicon
                $textblock.Text = "$name`:"
                $childitem.Tag = "$name`:"

            } else {
                $image.Source = $foldericon
                $textblock.Text = $name
                $childitem.Tag = "$tag\$name"
            }

            [void]$stackpanel.Children.Add($image)
            [void]$stackpanel.Children.Add($textblock)

            $childitem.Header = $stackpanel

            [void]$childitem.Items.Add("*")
            [void]$parent.Items.Add($childitem)
        }

        function Get-SubDirectory {
            param (
                [string]$nameSpace,
                [object]$treeviewItem
            )

            $textbox.Text = $nameSpace
            try {
                $dirs = $server.EnumDirectories($nameSpace)
            } catch {
                return
            }
            $subdirs = $dirs.Name

            foreach ($subdir in $subdirs) {
                if (!$subdir.StartsWith("$") -and $subdir -ne 'System Volume Information') {
                    Add-TreeItem -Name $subdir -Parent $treeviewItem -Tag $nameSpace
                }
            }
        }

        function Convert-b64toimg {
            param ($base64)

            $bitmap = New-Object System.Windows.Media.Imaging.BitmapImage
            $bitmap.BeginInit()
            $bitmap.StreamSource = [System.IO.MemoryStream][System.Convert]::FromBase64String($base64)
            $bitmap.EndInit()
            $bitmap.Freeze()
            return $bitmap
        }

        $diskicon = Convert-b64toimg "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"
        $foldericon = Convert-b64toimg "iVBORw0KGgoAAAANSUhEUgAAABkAAAAZCAYAAADE6YVjAAAAAXNSR0IArs4c6QAAAARnQU1BAACxjwv8YQUAAAAJcEhZcwAACxEAAAsRAX9kX5EAAAAYdEVYdFNvZnR3YXJlAHBhaW50Lm5ldCA0LjAuNWWFMmUAAAU0SURBVEhLtZXpU5NXFIf9q/qto9bRuhc3xqUiUK3KoLYq6ihu1VIU1DpjRZ3BHVR8i6hUkDUJASNL2EJIWLKvBLJAAmHRpwfb6ai10Q/2w29u3pP3/p57zrn3vnOA/13/CkwMlzLuv0rMfYaoM59R+1ki1lwiFtHgGcIDuYT6fiZoPsWI6SSBnmyGeo4yZDxN2KEQHXr54H3Pdx5mNe6/QnzkGtMxNVNjeqK+AkLWQ/iMWdg7sxnz3uZ1vIrJSBnx0O9MhBQmggqxkRJC9hsEzFc+Dol5cpkcFaNXHbyasTMVNzARqWXEeZv+lh+xG/OIRWrgtU5ebxG1yu9meb+JEct57C+2fwLEe04g95mOPxJV8JphCcPUuBOHfg/6qm/pa8klNvyA6fFqZqbqZaxiZqKWQF8uVm3qp0LuMTNZyfREuUx+JuEo8agLe1smHTXpGLXSB3O+lKqMV5N1UtZypqJ/SCwHS2P6J0Iis5BqgTyR3tyVcIj4mAtL807aq1IxqLJwdR6TJhfL/xUCK3kjn/Ekg9rvPg6JevL/hlQJ5KmU4qGEg9IXCwNN22ir3ES3ap9AjjLqvU48/FBgN0SFeAzZDDSk3nnf852HWY25zxKPFEut/4JMRmcX5mM8bKJPm0bLs/V01e/B2X6IsPMyscAtRt2XRZdwdx1kQPsJ5Rp1nRGIZCKQqZhs09FiCTuJhQyYNFtoLl9HZ20mjtb9BK0XJJsrhG3nZJvn4Wr/AUfbEc+I/fFsI//xfAcwq4gjR0pTxPRkhQAeMh66zavpHkYDWoz1m3j5ZDWd1duxN+9muO80IVuejCcImI7h0W/F2boLtyFfrBJAwtZTjAdvMTn+VFZ/j7HADSbGahh2FGGoWYeuLImOynRsL3bg7zksgGP4DPvwdu2W52wp4wH6NJvFKgEkaP2J6LA0dKxMxruM+q9LFnfxmH+hu3oVTY+S0FekyFbdhrdzr1wnWXg6MnC1phBwVuOxqelvSBOrBJCRgWOM+a9JmUqI+AoJea4SlMY6pamdlStoVJbTVr6BQemPq22ngDJwNm/B3rSKgFuPzz0gmXwEEug7TMTzm5TpDkHXZYbtFxm2XsTenkX7s2VoS76m9cla+lUbcbxMlQxmAclYNEsIuzSE3N0CSRWrBBC/6RBB50XC3kICtl/xD+bh78/DIveWvnwJDQ8W0iJ96atNxtYoIN0GrA1JWOoX4Ler8Dq7MKu3iFUCiK/ngKw8Xy7EAnwDZ6UXOXjkGh/QZdL2dDHq+1/RXLoSc80aMV+LTbsKm3opHvU8buoqKdC1YFKliFUCiKdrr6w8B7/lAu7eUzi7j+PoPCIH8XtaHi9CXTyPZmUJpqqVDKq/wapZgUO9mKB2LqmlVSQ9bKG3fqNYJYA4O3bhMZ2QDHJxdGVj0x/E2rafXnW6QBaiKZ7LS2URpucrGFQtF8hyHJqlDGkXcLz0OnuVUno/loldvwO37He3MQebXB3W1n1yMe7BKBNnIeqiL9GVLHwDsaiWYdMsw6pehl1A7bXraK7birlhh1glgLi6T2Br24tZmyqr34BJvZn+xu1y2r+l9fF86m5+gbZ4PsbnazDXJ9OvXv9mNNUl45LSDck3x91bKFYJIF7TJWVQl6mYNGn6fl0WpoYMeupSaK9Yje7RcjmMqbSWZ9gNz9crxvotSq86TTHWpiiGmk2KUZWuOAyXlBG3Snnb8x3A2wp6m3b6rE+wtp+nq2oDL0oX01CaQndjAVZjbdGH5vyXPhj83Ppg8POKOX8Cx4yjZbQFLr4AAAAASUVORK5CYII="
        $dbatoolsicon = Convert-b64toimg "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"
    }

    process {
        if (Test-FunctionInterrupt) { return }

        try {
            $server = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential
        } catch {
            Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $SqlInstance
            return
        }

        # Create XAML form in Visual Studio, ensuring the ListView looks chromeless
        [xml]$xaml = '<Window
        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
        Title="Locate Folder" Height="620" Width="440" Background="#F0F0F0"
        WindowStartupLocation="CenterScreen">
    <Grid>
        <TreeView Name="treeview" Height="462" Width="391" Background="#FFFFFF" BorderBrush="#FFFFFF" Foreground="#FFFFFF" Margin="11,36,11,79"/>
        <Label x:Name="label" Content="Select the folder:" HorizontalAlignment="Left" Margin="15,4,0,0" VerticalAlignment="Top"/>
        <Label x:Name="path" Content="Selected Path" HorizontalAlignment="Left" Margin="15,502,0,0" VerticalAlignment="Top"/>
        <TextBox Name="textbox" HorizontalAlignment="Left" Height="Auto" Margin="111,504,0,0" TextWrapping="NoWrap" Text="C:\" VerticalAlignment="Top" Width="292"/>
        <Button Name="okbutton" Content="OK" HorizontalAlignment="Left" Margin="241,540,0,0" VerticalAlignment="Top" Width="75"/>
        <Button Name="cancelbutton" Content="Cancel" HorizontalAlignment="Left" Margin="328.766,540,0,0" VerticalAlignment="Top" Width="75"/>
    </Grid>
</Window>
'
        # Turn XAML into PowerShell objects
        $window = [Windows.Markup.XamlReader]::Load((New-Object System.Xml.XmlNodeReader $xaml))
        $window.icon = $dbatoolsicon

        $xaml.SelectNodes("//*[@Name]") | ForEach-Object { Set-Variable -Name ($_.Name) -Value $window.FindName($_.Name) -Scope Script }

        try {
            $drives = ($server.EnumAvailableMedia()).Name
        } catch {
            Stop-Function -Message "No access to remote SQL Server files." -Target $SqlInstance
            return
        }

        foreach ($drive in $drives) {
            $drive = $drive.Replace(":", "")
            Add-TreeItem -Name $drive -Parent $treeview -Tag $drive
        }

        $window.Add_SourceInitialized( {
                [System.Windows.RoutedEventHandler]$Event = {
                    if ($_.OriginalSource -is [System.Windows.Controls.TreeViewItem]) {
                        $treeviewItem = $_.OriginalSource
                        $treeviewItem.items.clear()
                        Get-SubDirectory -NameSpace $treeviewItem.Tag -TreeViewItem $treeviewItem
                    }
                }
                $treeview.AddHandler([System.Windows.Controls.TreeViewItem]::ExpandedEvent, $Event)
                $treeview.AddHandler([System.Windows.Controls.TreeViewItem]::SelectedEvent, $Event)
            })

        $okbutton.Add_Click( {
                $window.Close()
            })

        $cancelbutton.Add_Click( {
                $textbox.Text = $null
                $window.Close()
            })

        $null = $window.ShowDialog()
    }

    end {

        if ($textbox.Text.Length -gt 0) {
            $drive = $textbox.Text + '\'
            return $drive
        }

        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Show-SqlServerFileSystem
    }
}

tools\dbatools\functions\Start-DbaAgentJob.ps1

function Start-DbaAgentJob {
    <#
    .SYNOPSIS
        Starts a running SQL Server Agent Job.

    .DESCRIPTION
        This command starts a job then returns connected SMO object for SQL Agent Job information for each instance(s) of SQL Server.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Job
        The job(s) to process - this list is auto-populated from the server. If unspecified, all jobs will be processed.

    .PARAMETER ExcludeJob
        The job(s) to exclude - this list is auto-populated from the server.

    .PARAMETER AllJobs
        Retrieve all the jobs

    .PARAMETER Wait
        Wait for output until the job has started

    .PARAMETER WaitPeriod
        Wait period in seconds to use when -Wait is used

    .PARAMETER SleepPeriod
        Period in milliseconds to wait after a job has started

    .PARAMETER InputObject
        Internal parameter that enables piping

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Job, Agent
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Start-DbaAgentJob

    .EXAMPLE
        PS C:\> Start-DbaAgentJob -SqlInstance localhost

        Starts all running SQL Agent Jobs on the local SQL Server instance

    .EXAMPLE
        PS C:\> Get-DbaAgentJob -SqlInstance sql2016 -Job cdc.DBWithCDC_capture | Start-DbaAgentJob

        Starts the cdc.DBWithCDC_capture SQL Agent Job on sql2016

    .EXAMPLE
        PS C:\> Start-DbaAgentJob -SqlInstance sql2016 -Job cdc.DBWithCDC_capture

        Starts the cdc.DBWithCDC_capture SQL Agent Job on sql2016

    .EXAMPLE
        PS C:\> $servers | Find-DbaAgentJob -IsFailed | Start-DbaAgentJob

        Restarts all failed jobs on all servers in the $servers collection

    .EXAMPLE
        PS C:\> Start-DbaAgentJob -SqlInstance sql2016 -AllJobs

        Start all the jobs

    #>
    [CmdletBinding(SupportsShouldProcess, DefaultParameterSetName = "Default")]
    param (
        [parameter(Mandatory, ParameterSetName = "Instance")]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$Job,
        [string[]]$ExcludeJob,
        [parameter(Mandatory, ValueFromPipeline, ParameterSetName = "Object")]
        [Microsoft.SqlServer.Management.Smo.Agent.Job[]]$InputObject,
        [switch]$AllJobs,
        [switch]$Wait,
        [int]$WaitPeriod = 3,
        [int]$SleepPeriod = 300,
        [Alias('Silent')]
        [switch]$EnableException
    )
    process {
        if ((Test-Bound -not -ParameterName AllJobs) -and (Test-Bound -not -ParameterName Job) -and (Test-Bound -not -ParameterName InputObject)) {
            Stop-Function -Message "Please use one of the job parameters, either -Job or -AllJobs. Or pipe in a list of jobs." -Target $instance
            return
        }
        # Loop through each of the instances
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            # Check if all the jobs need to included
            if ($AllJobs) {
                $InputObject += $server.JobServer.Jobs
            }

            # If a specific job needs to be added
            if (-not $AllJobs -and $Job) {
                $InputObject = $server.JobServer.Jobs | Where-Object Name -In $Job
            }

            # If a job needs to be excluded
            if ($ExcludeJob) {
                $InputObject = $InputObject | Where-Object Name -NotIn $ExcludeJob
            }
        }

        # Loop through each of the jobs
        foreach ($currentjob in $InputObject) {
            $server = $currentjob.Parent.Parent
            $status = $currentjob.CurrentRunStatus

            if ($status -ne 'Idle') {
                Stop-Function -Message "$currentjob on $server is not idle ($status)" -Target $currentjob -Continue
            }

            If ($Pscmdlet.ShouldProcess($server, "Starting job $currentjob")) {
                # Start the job
                $lastrun = $currentjob.LastRunDate
                Write-Message -Level Verbose -Message "Last run date was $lastrun"
                $null = $currentjob.Start()

                # Wait and refresh so that it has a chance to change status
                Start-Sleep -Milliseconds $SleepPeriod
                $currentjob.Refresh()

                $i = 0
                # Check if the status is Idle
                while (($currentjob.CurrentRunStatus -eq 'Idle' -and $i++ -lt 60)) {
                    Write-Message -Level Verbose -Message "Job $($currentjob.Name) status is $($currentjob.CurrentRunStatus)"
                    Write-Message -Level Verbose -Message "Job $($currentjob.Name) last run date is $($currentjob.LastRunDate)"

                    Write-Message -Level Verbose -Message "Sleeping for $SleepPeriod ms and refreshing"
                    Start-Sleep -Milliseconds $SleepPeriod
                    $currentjob.Refresh()

                    # If it failed fast, speed up output
                    if ($lastrun -ne $currentjob.LastRunDate) {
                        $i = 600
                    }
                }

                # Wait for the job
                if (Test-Bound -ParameterName Wait) {
                    while ($currentjob.CurrentRunStatus -ne 'Idle') {
                        Write-Message -Level Output -Message "$currentjob is $($currentjob.CurrentRunStatus)"
                        Start-Sleep -Seconds $WaitPeriod
                        $currentjob.Refresh()
                    }
                    Get-DbaAgentJob -SqlInstance $server -Job $currentjob.Name
                } else {
                    Get-DbaAgentJob -SqlInstance $server -Job $currentjob.Name
                }
            }
        }
    }
}

tools\dbatools\functions\Set-DbaEndpoint.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Set-DbaEndpoint {
    <#
    .SYNOPSIS
        Sets endpoint properties on a SQL Server instance.

    .DESCRIPTION
        Sets endpoint properties on a SQL Server instance.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Owner
        Change the endpoint owner.

    .PARAMETER Type
        Change the endpoint type. Options: DatabaseMirroring, ServiceBroker, Soap, TSql

    .PARAMETER Endpoint
        Only set specific endpoint properties.

    .PARAMETER AllEndpoints
        Set all endpoint properties on an instance.

    .PARAMETER InputObject
        Enables piping from Get-Endpoint.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Endpoint
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Set-DbaEndpoint

    .EXAMPLE
        PS C:\> Set-DbaEndpoint -SqlInstance sql2016 -AllEndpoints -Owner sa

        Sets all endpoint owners to sa on sql2016

    .EXAMPLE
        PS C:\> Get-DbaEndpoint -SqlInstance sql2016 -Endpoint ep1 | Set-DbaEndpoint -Type TSql

        Changes the endpoint type to tsql on endpoint ep1

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'Low')]
    param (
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$EndPoint,
        [string]$Owner,
        [ValidateSet('DatabaseMirroring', 'ServiceBroker', 'Soap', 'TSql')]
        [string]$Type,
        [switch]$AllEndpoints,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Endpoint[]]$InputObject,
        [switch]$EnableException
    )

    process {
        if ((Test-Bound -ParameterName SqlInstance) -And (Test-Bound -Not -ParameterName Endpoint, AllEndpoints)) {
            Stop-Function -Message "You must specify AllEndpoints or Endpoint when using the SqlInstance parameter."
            return
        }
        foreach ($instance in $SqlInstance) {
            $InputObject += Get-DbaEndpoint -SqlInstance $instance -SqlCredential $SqlCredential -EndPoint $Endpoint
        }

        $props = "Owner", "Type"
        foreach ($ep in $InputObject) {
            try {
                if ($Pscmdlet.ShouldProcess($ep.Parent.Name, "Seting properties on $ep")) {
                    foreach ($prop in $props) {
                        if ($prop -eq "Type") {
                            $realprop = "EndpointType"
                            if (Test-Bound -ParameterName $prop) {
                                $ep.$realprop = (Get-Variable -Name $prop -ValueOnly)
                            }
                        } elseif (Test-Bound -ParameterName $prop) {
                            $ep.$prop = (Get-Variable -Name $prop -ValueOnly)
                        }
                    }
                    $ep.Alter()
                    $ep
                }
            } catch {
                Stop-Function -Message "Failure" -ErrorRecord $_ -Continue
            }
        }
    }
}

tools\dbatools\functions\Start-DbaMigration.ps1

function Start-DbaMigration {
    <#
    .SYNOPSIS
        Migrates SQL Server *ALL* databases, logins, database mail profiles/accounts, credentials, SQL Agent objects, linked servers,
        Central Management Server objects, server configuration settings (sp_configure), user objects in systems databases,
        system triggers and backup devices from one SQL Server to another.

        For more granular control, please use Exclude or use the other functions available within the dbatools module.

    .DESCRIPTION
        Start-DbaMigration consolidates most of the migration tools in dbatools into one command.  This is useful when you're looking to migrate entire instances. It less flexible than using the underlying functions. Think of it as an easy button. It migrates:

        All user databases to exclude support databases such as ReportServerTempDB (Use -IncludeSupportDbs for this). Use -Exclude Databases to skip.
        All logins. Use -Exclude Logins to skip.
        All database mail objects. Use -Exclude DatabaseMail
        All credentials. Use -Exclude Credentials to skip.
        All objects within the Job Server (SQL Agent). Use -Exclude AgentServer to skip.
        All linked servers. Use -Exclude LinkedServers to skip.
        All groups and servers within Central Management Server. Use -Exclude CentralManagementServer to skip.
        All SQL Server configuration objects (everything in sp_configure). Use -Exclude SpConfigure to skip.
        All user objects in system databases. Use -Exclude SysDbUserObjects to skip.
        All system triggers. Use -Exclude SystemTriggers to skip.
        All system backup devices. Use -Exclude BackupDevices to skip.
        All Audits. Use -Exclude Audits to skip.
        All Endpoints. Use -Exclude Endpoints to skip.
        All Extended Events. Use -Exclude ExtendedEvents to skip.
        All Policy Management objects. Use -Exclude PolicyManagement to skip.
        All Resource Governor objects. Use -Exclude ResourceGovernor to skip.
        All Server Audit Specifications. Use -Exclude ServerAuditSpecifications to skip.
        All Custom Errors (User Defined Messages). Use -Exclude CustomErrors to skip.
        Copies All Data Collector collection sets. Does not configure the server. Use -Exclude DataCollector to skip.

        This script provides the ability to migrate databases using detach/copy/attach or backup/restore. SQL Server logins, including passwords, SID and database/server roles can also be migrated. In addition, job server objects can be migrated and server configuration settings can be exported or migrated. This script works with named instances, clusters and SQL Express.

        By default, databases will be migrated to the destination SQL Server's default data and log directories. You can override this by specifying -ReuseSourceFolderStructure. Filestreams and filegroups are also migrated. Safety is emphasized.

    .PARAMETER Source
        Source SQL Server.

    .PARAMETER SourceSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Destination
        Destination SQL Server. You may specify multiple servers.

        Note that when using -BackupRestore with multiple servers, the backup will only be performed once and backups will be deleted at the end (if you didn't specify -ExcludeBackupCleanup).

        When using -DetachAttach with multiple servers, -Reattach must be specified.

    .PARAMETER DestinationSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER BackupRestore
        If this switch is enabled, the Copy-Only backup and restore method is used to perform database migrations. You must specify -SharedPath with a valid UNC format as well (\\server\share).

    .PARAMETER SharedPath
        Specifies the network location for the backup files. The SQL Server service accounts on both Source and Destination must have read/write permission to access this location.

    .PARAMETER WithReplace
        If this switch is enabled, databases are restored from backup using WITH REPLACE. This is useful if you want to stage some complex file paths.

    .PARAMETER ReuseSourceFolderStructure
        If this switch is enabled, the data and log directory structures on Source will be kept on Destination. Otherwise, databases will be migrated to Destination's default data and log directories.

        Consider this if you're migrating between different versions and use part of Microsoft's default SQL structure (MSSQL12.INSTANCE, etc.).

    .PARAMETER DetachAttach
        If this switch is enabled, the the detach/copy/attach method is used to perform database migrations. No files are deleted on Source. If the destination attachment fails, the source database will be reattached. File copies are performed over administrative shares (\\server\x$\mssql) using BITS. If a database is being mirrored, the mirror will be broken prior to migration.

    .PARAMETER Reattach
        If this switch is enabled, all databases are reattached to Source after a DetachAttach migration is complete.

    .PARAMETER NoRecovery
        If this switch is enabled, databases will be left in the No Recovery state to enable further backups to be added.

    .PARAMETER IncludeSupportDbs
        If this switch is enabled, the ReportServer, ReportServerTempDb, SSIDb, and distribution databases will be migrated if they exist. A logfile named $SOURCE-$DESTINATION-$date-Sqls.csv will be written to the current directory. Requires -BackupRestore or -DetachAttach.

    .PARAMETER SetSourceReadOnly
        If this switch is enabled, all migrated databases will be set to ReadOnly on the source instance prior to detach/attach & backup/restore. If -Reattach is specified, the database is set to read-only after reattaching.

    
    .PARAMETER Exclude
        Exclude one or more objects to migrate
    
        Databases
        Logins
        AgentServer
        Credentials
        LinkedServers
        SpConfigure
        CentralManagementServer
        DatabaseMail
        SysDbUserObjects
        SystemTriggers
        BackupDevices
        Audits
        Endpoints
        ExtendedEvents
        PolicyManagement
        ResourceGovernor
        ServerAuditSpecifications
        CustomErrors
        DataCollector

    .PARAMETER ExcludeSaRename
        If this switch is enabled, the sa account will not be renamed on the destination instance to match the source.

    .PARAMETER DisableJobsOnDestination
        If this switch is enabled, migrated SQL Agent jobs will be disabled on the destination instance.

    .PARAMETER DisableJobsOnSource
        If this switch is enabled, SQL Agent jobs will be disabled on the source instance.

    .PARAMETER UseLastBackup
        Use the last full, diff and logs instead of performing backups. Note that the backups must exist in a location accessible by all destination servers, such a network share.

    .PARAMETER Continue
        If specified, will to attempt to restore transaction log backups on top of existing database(s) in Recovering or Standby states. Only usable with -UseLastBackup

    .PARAMETER Force
        If migrating users, forces drop and recreate of SQL and Windows logins.
        If migrating databases, deletes existing databases with matching names.
        If using -DetachAttach, -Force will break mirrors and drop dbs from Availability Groups.

        For other migration objects, it will just drop existing items and readd, if -force is supported within the underlying function.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Migration
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Start-DbaMigration

    .EXAMPLE
        PS C:\> Start-DbaMigration -Source sqlserver\instance -Destination sqlcluster -DetachAttach

        All databases, logins, job objects and sp_configure options will be migrated from sqlserver\instance to sqlcluster. Databases will be migrated using the detach/copy files/attach method. Dbowner will be updated. User passwords, SIDs, database roles and server roles will be migrated along with the login.

    .EXAMPLE
        PS C:\> $params = @{
        >> Source = "sqlcluster"
        >> Destination = "sql2016"
        >> SourceSqlCredential = $scred
        >> DestinationSqlCredential = $cred
        >> SharedPath = "\\fileserver\share\sqlbackups\Migration"
        >> BackupRestore = $true
        >> ReuseSourceFolderStructure = $true
        >> Force = $true
        >> }
        >>
        PS C:\> Start-DbaMigration @params -Verbose

        Utilizes splatting technique to set all the needed parameters. This will migrate databases using the backup/restore method. It will also include migration of the logins, database mail configuration, credentials, SQL Agent, Central Management Server, and SQL Server global configuration.

    .EXAMPLE
        PS C:\> Start-DbaMigration -Verbose -Source sqlcluster -Destination sql2016 -DetachAttach -Reattach -SetSourceReadonly

        Migrates databases using detach/copy/attach. Reattach at source and set source databases read-only. Also migrates everything else.

    .EXAMPLE
        PS C:\> $PSDefaultParameters = @{
        >> "dbatools:Source" = "sqlcluster"
        >> "dbatools:Destination" = "sql2016"
        >> }
        >>
        PS C:\> Start-DbaMigration -Verbose -Exclude Databases, Logins

        Utilizes the PSDefaultParameterValues system variable, and sets the Source and Destination parameters for any function in the module that has those parameter names. This prevents the need from passing them in constantly.
        The execution of the function will migrate everything but logins and databases.

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [DbaInstanceParameter]$Source,
        [DbaInstanceParameter[]]$Destination,
        [switch]$DetachAttach,
        [switch]$Reattach,
        [switch]$BackupRestore,
        [Alias("NetworkShare")]
        [parameter(HelpMessage = "Specify a valid network share in the format \\server\share that can be accessed by your account and both Sql Server service accounts.")]
        [string]$SharedPath,
        [switch]$WithReplace,
        [switch]$NoRecovery,
        [switch]$SetSourceReadOnly,
        [switch]$ReuseSourceFolderStructure,
        [switch]$IncludeSupportDbs,
        [PSCredential]$SourceSqlCredential,
        [PSCredential]$DestinationSqlCredential,
        [ValidateSet('Databases', 'Logins', 'AgentServer', 'Credentials', 'LinkedServers', 'SpConfigure', 'CentralManagementServer', 'DatabaseMail', 'SysDbUserObjects', 'SystemTriggers', 'BackupDevices', 'Audits', 'Endpoints', 'ExtendedEvents', 'PolicyManagement', 'ResourceGovernor', 'ServerAuditSpecifications', 'CustomErrors', 'DataCollector')]
        [string[]]$Exclude,
        [switch]$DisableJobsOnDestination,
        [switch]$DisableJobsOnSource,
        [switch]$ExcludeSaRename,
        [switch]$UseLastBackup,
        [switch]$Continue,
        [switch]$Force,
        [switch]$EnableException
    )
    
    begin {
        Test-DbaDeprecation -DeprecatedOn 1.0.0 -Parameter NetworkShare -CustomMessage "Using the parameter NetworkShare is deprecated. This parameter will be removed in version 1.0.0 or before. Use SharedPath instead."
        
        if ($Exclude -notcontains "Databases") {
            if (-not $BackupRestore -and -not $DetachAttach) {
                Stop-Function -Message "You must specify a database migration method (-BackupRestore or -DetachAttach) or -Exclude Databases"
                return
            }
        }
        
        $elapsed = [System.Diagnostics.Stopwatch]::StartNew()
        $started = Get-Date
        $sourceserver = Connect-SqlInstance -SqlInstance $Source -SqlCredential $SourceSqlCredential

        if ($BackupRestore -and (-not $SharedPath -and -not $UseLastBackup)) {
            Stop-Function -Message "When using -BackupRestore, you must specify -SharedPath or -UseLastBackup"
            return
        }
        if ($SharedPath -and $UseLastBackup) {
            Stop-Function -Message "-SharedPath cannot be used with -UseLastBackup because the backup path is determined by the paths in the last backups"
            return
        }
        if ($DetachAttach -and -not $Reattach -and $Destination.Count -gt 1) {
            Stop-Function -Message "When using -DetachAttach with multiple servers, you must specify -Reattach to reattach database at source"
            return
        }
        if ($Continue -and -not $UseLastBackup) {
            Stop-Function -Message "-Continue cannot be used without -UseLastBackup"
            return
        }
    }

    process {
        if (Test-FunctionInterrupt) { return }

        # testing twice for whatif reasons
        if ($BackupRestore -and (-not $SharedPath -and -not $UseLastBackup)) {
            Stop-Function -Message "When using -BackupRestore, you must specify -SharedPath or -UseLastBackup"
            return
        }
        if ($SharedPath -and $UseLastBackup) {
            Stop-Function -Message "-SharedPath cannot be used with -UseLastBackup because the backup path is determined by the paths in the last backups"
            return
        }
        if ($DetachAttach -and -not $Reattach -and $Destination.Count -gt 1) {
            Stop-Function -Message "When using -DetachAttach with multiple servers, you must specify -Reattach to reattach database at source"
            return
        }
        if ($Exclude -notcontains 'SpConfigure') {
            Write-Message -Level Verbose -Message "Migrating SQL Server Configuration"
            Copy-DbaSpConfigure -Source $sourceserver -Destination $Destination -DestinationSqlCredential $DestinationSqlCredential
        }

        if ($Exclude -notcontains 'CustomErrors') {
            Write-Message -Level Verbose -Message "Migrating custom errors (user defined messages)"
            Copy-DbaCustomError -Source $sourceserver -Destination $Destination -DestinationSqlCredential $DestinationSqlCredential -Force:$Force
        }

        if ($Exclude -notcontains 'Credentials') {
            Write-Message -Level Verbose -Message "Migrating SQL credentials"
            Copy-DbaCredential -Source $sourceserver -Destination $Destination -DestinationSqlCredential $DestinationSqlCredential -Force:$Force
        }

        if ($Exclude -notcontains 'DatabaseMail') {
            Write-Message -Level Verbose -Message "Migrating database mail"
            Copy-DbaDbMail -Source $sourceserver -Destination $Destination -DestinationSqlCredential $DestinationSqlCredential -Force:$Force
        }

        if ($Exclude -notcontains 'CentralManagementServer') {
            Write-Message -Level Verbose -Message "Migrating Central Management Server"
            Copy-DbaCmsRegServer -Source $sourceserver -Destination $Destination -DestinationSqlCredential $DestinationSqlCredential -Force:$Force
        }

        if ($Exclude -notcontains 'BackupDevices') {
            Write-Message -Level Verbose -Message "Migrating Backup Devices"
            Copy-DbaBackupDevice -Source $sourceserver -Destination $Destination -DestinationSqlCredential $DestinationSqlCredential -Force:$Force
        }

        if ($Exclude -notcontains 'SystemTriggers') {
            Write-Message -Level Verbose -Message "Migrating System Triggers"
            Copy-DbaServerTrigger -Source $sourceserver -Destination $Destination -DestinationSqlCredential $DestinationSqlCredential -Force:$Force
        }

        if ($Exclude -notcontains 'Databases') {
            # Do it
            Write-Message -Level Verbose -Message "Migrating databases"
            if ($BackupRestore) {
                if ($UseLastBackup) {
                    Copy-DbaDatabase -Source $sourceserver -Destination $Destination -DestinationSqlCredential $DestinationSqlCredential -AllDatabases -SetSourceReadOnly:$SetSourceReadOnly -ReuseSourceFolderStructure:$ReuseSourceFolderStructure -BackupRestore -Force:$Force -NoRecovery:$NoRecovery -WithReplace:$WithReplace -IncludeSupportDbs:$IncludeSupportDbs -UseLastBackup:$UseLastBackup -Continue:$Continue
                } else {
                    Copy-DbaDatabase -Source $sourceserver -Destination $Destination -DestinationSqlCredential $DestinationSqlCredential -AllDatabases -SetSourceReadOnly:$SetSourceReadOnly -ReuseSourceFolderStructure:$ReuseSourceFolderStructure -BackupRestore -SharedPath $SharedPath -Force:$Force -NoRecovery:$NoRecovery -WithReplace:$WithReplace -IncludeSupportDbs:$IncludeSupportDbs
                }
            } else {
                Copy-DbaDatabase -Source $sourceserver -Destination $Destination -DestinationSqlCredential $DestinationSqlCredential -AllDatabases -SetSourceReadOnly:$SetSourceReadOnly -ReuseSourceFolderStructure:$ReuseSourceFolderStructure -DetachAttach:$DetachAttach -Reattach:$Reattach -Force:$Force -IncludeSupportDbs:$IncludeSupportDbs
            }
        }

        if ($Exclude -notcontains 'Logins') {
            Write-Message -Level Verbose -Message "Migrating logins"
            $syncit = $ExcludeSaRename -eq $false
            Copy-DbaLogin -Source $sourceserver -Destination $Destination -DestinationSqlCredential $DestinationSqlCredential -Force:$Force -SyncSaName:$syncit
        }

        if ($Exclude -notcontains 'Logins' -and $Exclude -notcontains 'Databases' -and -not $NoRecovery) {
            Write-Message -Level Verbose -Message "Updating database owners to match newly migrated logins"
            foreach ($dest in $Destination) {
                $null = Update-SqlDbOwner -Source $sourceserver -Destination $dest -DestinationSqlCredential $DestinationSqlCredential
            }
        }
        
        if ($Exclude -notcontains 'LinkedServers') {
            Write-Message -Level Verbose -Message "Migrating linked servers"
            Copy-DbaLinkedServer -Source $sourceserver -Destination $Destination -DestinationSqlCredential $DestinationSqlCredential -Force:$Force
        }
        
        if ($Exclude -notcontains 'DataCollector') {
            Write-Message -Level Verbose -Message "Migrating Data Collector collection sets"
            Copy-DbaDataCollector -Source $sourceserver -Destination $Destination -DestinationSqlCredential $DestinationSqlCredential -Force:$Force
        }

        if ($Exclude -notcontains 'Audits') {
            Write-Message -Level Verbose -Message "Migrating Audits"
            Copy-DbaServerAudit -Source $sourceserver -Destination $Destination -DestinationSqlCredential $DestinationSqlCredential -Force:$Force
        }

        if ($Exclude -notcontains 'ServerAuditSpecifications') {
            Write-Message -Level Verbose -Message "Migrating Server Audit Specifications"
            Copy-DbaServerAuditSpecification -Source $sourceserver -Destination $Destination -DestinationSqlCredential $DestinationSqlCredential -Force:$Force
        }

        if ($Exclude -notcontains 'Endpoints') {
            Write-Message -Level Verbose -Message "Migrating Endpoints"
            Copy-DbaEndpoint -Source $sourceserver -Destination $Destination -DestinationSqlCredential $DestinationSqlCredential -Force:$Force
        }

        if ($Exclude -notcontains 'PolicyManagement') {
            Write-Message -Level Verbose -Message "Migrating Policy Management"
            Copy-DbaPolicyManagement -Source $sourceserver -Destination $Destination -DestinationSqlCredential $DestinationSqlCredential -Force:$Force
        }

        if ($Exclude -notcontains 'ResourceGovernor') {
            Write-Message -Level Verbose -Message "Migrating Resource Governor"
            Copy-DbaResourceGovernor -Source $sourceserver -Destination $Destination -DestinationSqlCredential $DestinationSqlCredential -Force:$Force
        }

        if ($Exclude -notcontains 'SysDbUserObjects') {
            Write-Message -Level Verbose -Message "Migrating user objects in system databases (this can take a second)."
            If ($Pscmdlet.ShouldProcess($destination, "Copying user objects.")) {
                Copy-DbaSysDbUserObject -Source $sourceserver -Destination $Destination -DestinationSqlCredential $DestinationSqlCredential -Force:$force
            }
        }

        if ($Exclude -notcontains 'ExtendedEvents') {
            Write-Message -Level Verbose -Message "Migrating Extended Events"
            Copy-DbaXESession -Source $sourceserver -Destination $Destination -DestinationSqlCredential $DestinationSqlCredential -Force:$Force
        }

        if ($Exclude -notcontains 'AgentServer') {
            Write-Message -Level Verbose -Message "Migrating job server"
            Copy-DbaAgentServer -Source $sourceserver -Destination $Destination -DestinationSqlCredential $DestinationSqlCredential -DisableJobsOnDestination:$DisableJobsOnDestination -DisableJobsOnSource:$DisableJobsOnSource -Force:$Force
        }
    }
    end {
        if (Test-FunctionInterrupt) { return }
        $totaltime = ($elapsed.Elapsed.toString().Split(".")[0])
        Write-Message -Level Verbose -Message "SQL Server migration complete."
        Write-Message -Level Verbose -Message "Migration started: $started"
        Write-Message -Level Verbose -Message "Migration completed: $(Get-Date)"
        Write-Message -Level Verbose -Message "Total Elapsed time: $totaltime"
    }
}

tools\dbatools\functions\Start-DbaPfDataCollectorSet.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Start-DbaPfDataCollectorSet {
    <#
    .SYNOPSIS
        Starts Performance Monitor Data Collector Set.

    .DESCRIPTION
        Starts Performance Monitor Data Collector Set.

    .PARAMETER ComputerName
        The target computer. Defaults to localhost.

    .PARAMETER Credential
        Allows you to login to $ComputerName using alternative credentials. To use:

        $cred = Get-Credential, then pass $cred object to the -Credential parameter.

    .PARAMETER CollectorSet
        The name of the Collector Set to start.

    .PARAMETER NoWait
        If this switch is enabled, the collector is started and the results are returned immediately.

    .PARAMETER InputObject
        Accepts the object output by Get-DbaPfDataCollectorSet via the pipeline.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: PerfMon
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Start-DbaPfDataCollectorSet

    .EXAMPLE
        PS C:\> Start-DbaPfDataCollectorSet

        Attempts to start all ready Collectors on localhost.

    .EXAMPLE
        PS C:\> Start-DbaPfDataCollectorSet -ComputerName sql2017

        Attempts to start all ready Collectors on localhost.

    .EXAMPLE
        PS C:\> Start-DbaPfDataCollectorSet -ComputerName sql2017, sql2016 -Credential ad\sqldba -CollectorSet 'System Correlation'

        Starts the 'System Correlation' Collector on sql2017 and sql2016 using alternative credentials.

    .EXAMPLE
        PS C:\> Get-DbaPfDataCollectorSet -CollectorSet 'System Correlation' | Start-DbaPfDataCollectorSet

        Starts the 'System Correlation' Collector.

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [DbaInstance[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [Alias("DataCollectorSet")]
        [string[]]$CollectorSet,
        [parameter(ValueFromPipeline)]
        [object[]]$InputObject,
        [switch]$NoWait,
        [switch]$EnableException
    )
    begin {
        $wait = $NoWait -eq $false

        $setscript = {
            $setname = $args[0]; $wait = $args[1]
            $collectorset = New-Object -ComObject Pla.DataCollectorSet
            $collectorset.Query($setname, $null)
            $null = $collectorset.Start($wait)
        }
    }
    process {
        
        
        if (-not $InputObject -or ($InputObject -and (Test-Bound -ParameterName ComputerName))) {
            foreach ($computer in $ComputerName) {
                $InputObject += Get-DbaPfDataCollectorSet -ComputerName $computer -Credential $Credential -CollectorSet $CollectorSet
            }
        }

        if ($InputObject) {
            if (-not $InputObject.DataCollectorSetObject) {
                Stop-Function -Message "InputObject is not of the right type. Please use Get-DbaPfDataCollectorSet."
                return
            }
        }

        # Check to see if its running first
        foreach ($set in $InputObject) {
            $setname = $set.Name
            $computer = $set.ComputerName
            $status = $set.State
            Write-Message -Level Verbose -Message "$setname on $ComputerName is $status."
            if ($Pscmdlet.ShouldProcess($computer, "Starting Performance Monitor collection set")) {
                if ($status -eq "Running") {
                    Stop-Function -Message "$setname on $computer is already running." -Continue
                }
                if ($status -eq "Disabled") {
                    Stop-Function -Message "$setname on $computer is disabled." -Continue
                }
                try {
                    Invoke-Command2 -ComputerName $computer -Credential $Credential -ScriptBlock $setscript -ArgumentList $setname, $wait -ErrorAction Stop
                } catch {
                    Stop-Function -Message "Failure starting $setname on $computer." -ErrorRecord $_ -Target $computer -Continue
                }

                Get-DbaPfDataCollectorSet -ComputerName $computer -Credential $Credential -CollectorSet $setname
            }
        }
    }
}

tools\dbatools\functions\Start-DbaService.ps1

function Start-DbaService {
    <#
    .SYNOPSIS
        Starts SQL Server services on a computer.

    .DESCRIPTION
        Starts the SQL Server related services on one or more computers. Will follow SQL Server service dependencies.

        Requires Local Admin rights on destination computer(s).

    .PARAMETER ComputerName
        The target SQL Server instance or instances.

    .PARAMETER InstanceName
        Only affects services that belong to the specific instances.

    .PARAMETER Credential
        Credential object used to connect to the computer as a different user.

    .PARAMETER Type
        Use -Type to collect only services of the desired SqlServiceType.
        Can be one of the following: "Agent","Browser","Engine","FullText","SSAS","SSIS","SSRS"

    .PARAMETER Timeout
        How long to wait for the start/stop request completion before moving on. Specify 0 to wait indefinitely.

    .PARAMETER InputObject
        A collection of services from Get-DbaService

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER WhatIf
        Shows what would happen if the cmdlet runs. The cmdlet is not run.

    .PARAMETER Confirm
        Prompts you for confirmation before running the cmdlet.

    .NOTES
        Tags: Service, SqlServer, Instance, Connect
        Author: Kirill Kravtsov (@nvarscar)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        Requires Local Admin rights on destination computer(s).

    .LINK
        https://dbatools.io/Start-DbaService

    .EXAMPLE
        PS C:\> Start-DbaService -ComputerName sqlserver2014a

        Starts the SQL Server related services on computer sqlserver2014a.

    .EXAMPLE
        PS C:\> 'sql1','sql2','sql3'| Get-DbaService | Start-DbaService

        Gets the SQL Server related services on computers sql1, sql2 and sql3 and starts them.

    .EXAMPLE
        PS C:\> Start-DbaService -ComputerName sql1,sql2 -Instance MSSQLSERVER

        Starts the SQL Server services related to the default instance MSSQLSERVER on computers sql1 and sql2.

    .EXAMPLE
        PS C:\> Start-DbaService -ComputerName $MyServers -Type SSRS

        Starts the SQL Server related services of type "SSRS" (Reporting Services) on computers in the variable MyServers.

    #>
    [CmdletBinding(DefaultParameterSetName = "Server", SupportsShouldProcess)]
    param (
        [Parameter(ParameterSetName = "Server", Position = 1)]
        [Alias("cn", "host", "Server")]
        [DbaInstanceParameter[]]$ComputerName = $env:COMPUTERNAME,
        [Alias("Instance")]
        [string[]]$InstanceName,
        [ValidateSet("Agent", "Browser", "Engine", "FullText", "SSAS", "SSIS", "SSRS")]
        [string[]]$Type,
        [parameter(ValueFromPipeline, Mandatory, ParameterSetName = "Service")]
        [Alias("ServiceCollection")]
        [object[]]$InputObject,
        [int]$Timeout = 60,
        [PSCredential]$Credential,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {
        $processArray = @()
        if ($PsCmdlet.ParameterSetName -eq "Server") {
            $serviceParams = @{ ComputerName = $ComputerName }
            if ($InstanceName) { $serviceParams.InstanceName = $InstanceName }
            if ($Type) { $serviceParams.Type = $Type }
            if ($Credential) { $serviceParams.Credential = $Credential }
            if ($EnableException) { $serviceParams.EnableException = $EnableException }
            $InputObject = Get-DbaService @serviceParams
        }
    }
    process {
        #Get all the objects from the pipeline before proceeding
        $processArray += $InputObject
    }
    end {
        $processArray = $processArray | Where-Object { (!$InstanceName -or $_.InstanceName -in $InstanceName) -and (!$Type -or $_.ServiceType -in $Type) }
        if ($PSCmdlet.ShouldProcess("$ProcessArray", "Starting Service")) {
            if ($processArray) {
                Update-ServiceStatus -InputObject $processArray -Action 'start' -Timeout $Timeout -EnableException $EnableException
            } else {
                Stop-Function -EnableException $EnableException -Message "No SQL Server services found with current parameters." -Category ObjectNotFound
            }
        }
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Start-DbaSqlService
    }
}

tools\dbatools\functions\Set-DbaDbState.ps1

#ValidationTags#Messaging,FlowControl,Pipeline#
function Set-DbaDbState {
    <#
    .SYNOPSIS
        Sets various options for databases, hereby called "states"

    .DESCRIPTION
        Sets some common "states" on databases:
        - "RW" options (ReadOnly, ReadWrite)
        - "Status" options (Online, Offline, Emergency, plus a special "Detached")
        - "Access" options (SingleUser, RestrictedUser, MultiUser)

        Returns an object with SqlInstance, Database, RW, Status, Access, Notes

        Notes gets filled when something went wrong setting the state

    .PARAMETER SqlInstance
        The target SQL Server instance or instances

    .PARAMETER SqlCredential
        Credential object used to connect to the SQL Server as a different user

    .PARAMETER Database
        The database(s) to process - this list is auto-populated from the server. if unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto-populated from the server

    .PARAMETER AllDatabases
        This is a parameter that was included for safety, so you don't accidentally set options on all databases without specifying

    .PARAMETER ReadOnly
        RW Option : Sets the database as READ_ONLY

    .PARAMETER ReadWrite
        RW Option : Sets the database as READ_WRITE

    .PARAMETER Online
        Status Option : Sets the database as ONLINE

    .PARAMETER Offline
        Status Option : Sets the database as OFFLINE

    .PARAMETER Emergency
        Status Option : Sets the database as EMERGENCY

    .PARAMETER Detached
        Status Option : Detaches the database

    .PARAMETER SingleUser
        Access Option : Sets the database as SINGLE_USER

    .PARAMETER RestrictedUser
        Access Option : Sets the database as RESTRICTED_USER

    .PARAMETER MultiUser
        Access Option : Sets the database as MULTI_USER

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER Force
        For most options, this translates to instantly rolling back any open transactions
        that may be stopping the process.
        For -Detached it is required to break mirroring and Availability Groups

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER InputObject
        Accepts piped database objects

    .NOTES
        Tags: Database, State
        Author: Simone Bizzotto (@niphold)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Set-DbaDbState

    .EXAMPLE
        PS C:\> Set-DbaDbState -SqlInstance sqlserver2014a -Database HR -Offline

        Sets the HR database as OFFLINE

    .EXAMPLE
        PS C:\> Set-DbaDbState -SqlInstance sqlserver2014a -AllDatabases -Exclude HR -ReadOnly -Force

        Sets all databases of the sqlserver2014a instance, except for HR, as READ_ONLY

    .EXAMPLE
        PS C:\> Get-DbaDbState -SqlInstance sql2016 | Where-Object Status -eq 'Offline' | Set-DbaDbState -Online

        Finds all offline databases and sets them to online

    .EXAMPLE
        PS C:\> Set-DbaDbState -SqlInstance sqlserver2014a -Database HR -SingleUser

        Sets the HR database as SINGLE_USER

    .EXAMPLE
        PS C:\> Set-DbaDbState -SqlInstance sqlserver2014a -Database HR -SingleUser -Force

        Sets the HR database as SINGLE_USER, dropping all other connections (and rolling back open transactions)

    .EXAMPLE
        PS C:\> Get-DbaDatabase -SqlInstance sqlserver2014a -Database HR | Set-DbaDbState -SingleUser -Force

        Gets the databases from Get-DbaDatabase, and sets them as SINGLE_USER, dropping all other connections (and rolling back open transactions)

    #>
    [CmdletBinding(DefaultParameterSetName = "Default", SupportsShouldProcess)]
    param (
        [parameter(Mandatory, ValueFromPipelineByPropertyName, ParameterSetName = "Server")]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]
        $SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [switch]$AllDatabases,
        [switch]$ReadOnly,
        [switch]$ReadWrite,
        [switch]$Online,
        [switch]$Offline,
        [switch]$Emergency,
        [switch]$Detached,
        [switch]$SingleUser,
        [switch]$RestrictedUser,
        [switch]$MultiUser,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException,
        [parameter(Mandatory, ValueFromPipeline, ParameterSetName = "Database")]
        [PsCustomObject[]]$InputObject
    )

    begin {
        function Get-WrongCombo($optset, $allparams) {
            $x = 0
            foreach ($opt in $optset) {
                if ($allparams.ContainsKey($opt)) { $x += 1 }
            }
            if ($x -gt 1) {
                $msg = $optset -Join ',-'
                $msg = "You can only specify one of: -" + $msg
                throw $msg
            }
        }

        function Edit-DatabaseState($sqlinstance, $dbname, $opt, $immediate = $false) {
            $warn = $null
            $sql = "ALTER DATABASE [$dbname] SET $opt"
            if ($immediate) {
                $sql += " WITH ROLLBACK IMMEDIATE"
            } else {
                $sql += " WITH NO_WAIT"
            }
            try {
                Write-Message -Level System -Message $sql
                if ($immediate) {
                    # this can be helpful only for SINGLE_USER databases
                    # but since $immediate is called, it does no more harm
                    # than the immediate rollback
                    $sqlinstance.KillAllProcesses($dbname)
                }
                $null = $sqlinstance.Query($sql)
            } catch {
                $warn = "Failed to set '$dbname' to $opt"
                Write-Message -Level Warning -Message $warn
            }
            return $warn
        }

        $StatusHash = @{
            'Offline'       = 'OFFLINE'
            'Normal'        = 'ONLINE'
            'EmergencyMode' = 'EMERGENCY'
        }

        function Get-DbState($databaseName, $dbStatuses) {
            $base = $dbStatuses | Where-Object DatabaseName -ceq $databaseName
            foreach ($status in $StatusHash.Keys) {
                if ($base.Status -match $status) {
                    $base.Status = $StatusHash[$status]
                    break
                }
            }
            return $base
        }

        $RWExclusive = @('ReadOnly', 'ReadWrite')
        $StatusExclusive = @('Online', 'Offline', 'Emergency', 'Detached')
        $AccessExclusive = @('SingleUser', 'RestrictedUser', 'MultiUser')
        $allparams = $PSBoundParameters
        try {
            Get-WrongCombo -optset $RWExclusive -allparams $allparams
        } catch {
            Stop-Function -Message $_
            return
        }
        try {
            Get-WrongCombo -optset $StatusExclusive -allparams $allparams
        } catch {
            Stop-Function -Message $_
            return
        }
        try {
            Get-WrongCombo -optset $AccessExclusive -allparams $allparams
        } catch {
            Stop-Function -Message $_
            return
        }
    }
    process {
        if (Test-FunctionInterrupt) { return }
        $dbs = @()
        if (!$Database -and !$AllDatabases -and !$InputObject -and !$ExcludeDatabase) {
            Stop-Function -Message "You must specify a -AllDatabases or -Database to continue"
            return
        }

        if ($InputObject) {
            if ($InputObject.Database) {
                # comes from Get-DbaDbState
                $dbs += $InputObject.Database
            } elseif ($InputObject.Name) {
                # comes from Get-DbaDatabase
                $dbs += $InputObject
            }
        } else {
            foreach ($instance in $SqlInstance) {
                try {
                    $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
                } catch {
                    Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
                }
                $all_dbs = $server.Databases
                $dbs += $all_dbs | Where-Object { @('master', 'model', 'msdb', 'tempdb', 'distribution') -notcontains $_.Name }

                if ($database) {
                    $dbs = $dbs | Where-Object { $database -contains $_.Name }
                }
                if ($ExcludeDatabase) {
                    $dbs = $dbs | Where-Object { $ExcludeDatabase -notcontains $_.Name }
                }
            }
        }

        # need to pick up here
        foreach ($db in $dbs) {
            if ($db.Name -in @('master', 'model', 'msdb', 'tempdb', 'distribution')) {
                Write-Message -Level Warning -Message "Database $db is a system one, skipping"
                Continue
            }
            $dbStatuses = @{}
            $server = $db.Parent
            if ($server -notin $dbStatuses.Keys) {
                $dbStatuses[$server] = Get-DbaDbState -SqlInstance $server
            }

            # normalizing properties returned by SMO to something more "fixed"
            $db_status = Get-DbState -DatabaseName $db.Name -dbStatuses $dbStatuses[$server]


            $warn = @()

            if ($db.DatabaseSnapshotBaseName.Length -gt 0) {
                Write-Message -Level Warning -Message "Database $db is a snapshot, skipping"
                Continue
            }

            if ($ReadOnly -eq $true) {
                if ($db_status.RW -eq 'READ_ONLY') {
                    Write-Message -Level VeryVerbose -Message "Database $db is already READ_ONLY"
                } else {
                    if ($Pscmdlet.ShouldProcess($server, "Set $db to READ_ONLY")) {
                        Write-Message -Level VeryVerbose -Message "Setting database $db to READ_ONLY"
                        $partial = Edit-DatabaseState -sqlinstance $server -dbname $db.Name -opt "READ_ONLY" -immediate $Force
                        $warn += $partial
                        if (!$partial) {
                            $db_status.RW = 'READ_ONLY'
                        }
                    }
                }
            }

            if ($ReadWrite -eq $true) {
                if ($db_status.RW -eq 'READ_WRITE') {
                    Write-Message -Level VeryVerbose -Message "Database $db is already READ_WRITE"
                } else {
                    if ($Pscmdlet.ShouldProcess($server, "Set $db to READ_WRITE")) {
                        Write-Message -Level VeryVerbose -Message "Setting database $db to READ_WRITE"
                        $partial = Edit-DatabaseState -sqlinstance $server -dbname $db.Name -opt "READ_WRITE" -immediate $Force
                        $warn += $partial
                        if (!$partial) {
                            $db_status.RW = 'READ_WRITE'
                        }
                    }
                }
            }

            if ($Online -eq $true) {
                if ($db_status.Status -eq 'ONLINE') {
                    Write-Message -Level VeryVerbose -Message "Database $db is already ONLINE"
                } else {
                    if ($Pscmdlet.ShouldProcess($server, "Set $db to ONLINE")) {
                        Write-Message -Level VeryVerbose -Message "Setting database $db to ONLINE"
                        $partial = Edit-DatabaseState -sqlinstance $server -dbname $db.Name -opt "ONLINE" -immediate $Force
                        $warn += $partial
                        if (!$partial) {
                            $db_status.Status = 'ONLINE'
                        }
                    }
                }
            }

            if ($Offline -eq $true) {
                if ($db_status.Status -eq 'OFFLINE') {
                    Write-Message -Level VeryVerbose -Message "Database $db is already OFFLINE"
                } else {
                    if ($Pscmdlet.ShouldProcess($server, "Set $db to OFFLINE")) {
                        Write-Message -Level VeryVerbose -Message "Setting database $db to OFFLINE"
                        $partial = Edit-DatabaseState -sqlinstance $server -dbname $db.Name -opt "OFFLINE" -immediate $Force
                        $warn += $partial
                        if (!$partial) {
                            $db_status.Status = 'OFFLINE'
                        }
                    }
                }
            }

            if ($Emergency -eq $true) {
                if ($db_status.Status -eq 'EMERGENCY') {
                    Write-Message -Level VeryVerbose -Message "Database $db is already EMERGENCY"
                } else {
                    if ($Pscmdlet.ShouldProcess($server, "Set $db to EMERGENCY")) {
                        Write-Message -Level VeryVerbose -Message "Setting database $db to EMERGENCY"
                        $partial = Edit-DatabaseState -sqlinstance $server -dbname $db.Name -opt "EMERGENCY" -immediate $Force
                        if (!$partial) {
                            $db_status.Status = 'EMERGENCY'
                        }
                    }
                }
            }

            if ($SingleUser -eq $true) {
                if ($db_status.Access -eq 'SINGLE_USER') {
                    Write-Message -Level VeryVerbose -Message "Database $db is already SINGLE_USER"
                } else {
                    if ($Pscmdlet.ShouldProcess($server, "Set $db to SINGLE_USER")) {
                        Write-Message -Level VeryVerbose -Message "Setting $db to SINGLE_USER"
                        $partial = Edit-DatabaseState -sqlinstance $server -dbname $db.Name -opt "SINGLE_USER" -immediate $Force
                        if (!$partial) {
                            $db_status.Access = 'SINGLE_USER'
                        }
                    }
                }
            }

            if ($RestrictedUser -eq $true) {
                if ($db_status.Access -eq 'RESTRICTED_USER') {
                    Write-Message -Level VeryVerbose -Message "Database $db is already RESTRICTED_USER"
                } else {
                    if ($Pscmdlet.ShouldProcess($server, "Set $db to RESTRICTED_USER")) {
                        Write-Message -Level VeryVerbose -Message "Setting $db to RESTRICTED_USER"
                        $partial = Edit-DatabaseState -sqlinstance $server -dbname $db.Name -opt "RESTRICTED_USER" -immediate $Force
                        if (!$partial) {
                            $db_status.Access = 'RESTRICTED_USER'
                        }
                    }
                }
            }

            if ($MultiUser -eq $true) {
                if ($db_status.Access -eq 'MULTI_USER') {
                    Write-Message -Level VeryVerbose -Message "Database $db is already MULTI_USER"
                } else {
                    if ($Pscmdlet.ShouldProcess($server, "Set $db to MULTI_USER")) {
                        Write-Message -Level VeryVerbose -Message "Setting $db to MULTI_USER"
                        $partial = Edit-DatabaseState -sqlinstance $server -dbname $db.Name -opt "MULTI_USER" -immediate $Force
                        if (!$partial) {
                            $db_status.Access = 'MULTI_USER'
                        }
                    }
                }
            }

            if ($Detached -eq $true) {
                # Refresh info about database state here (before detaching)
                $db.Refresh()
                # we need to see what snaps are on the server, as base databases cannot be dropped
                $snaps = $server.Databases | Where-Object { $_.DatabaseSnapshotBaseName.Length -gt 0 }
                $snaps = $snaps.DatabaseSnapshotBaseName | Get-Unique
                if ($db.Name -in $snaps) {
                    Write-Message -Level Warning -Message "Database $db has snapshots, you need to drop them before detaching, skipping..."
                    Continue
                }
                if ($db.IsMirroringEnabled -eq $true -or $db.AvailabilityGroupName.Length -gt 0) {
                    if ($Force -eq $false) {
                        Write-Message -Level Warning -Message "Needs -Force to detach $db, skipping"
                        Continue
                    }
                }

                if ($db.IsMirroringEnabled) {
                    if ($Pscmdlet.ShouldProcess($server, "Break mirroring for $db")) {
                        try {
                            $db.ChangeMirroringState([Microsoft.SqlServer.Management.Smo.MirroringOption]::Off)
                            $db.Alter()
                            $db.Refresh()
                            Write-Message -Level VeryVerbose -Message "Broke mirroring for $db"
                        } catch {
                            Stop-Function -Message "Could not break mirror for $db. Skipping." -ErrorRecord $_ -Target $server -Continue
                        }
                    }
                }

                if ($db.AvailabilityGroupName) {
                    $agname = $db.AvailabilityGroupName
                    if ($Pscmdlet.ShouldProcess($server, "Removing $db from AG [$agname]")) {
                        try {
                            $server.AvailabilityGroups[$db.AvailabilityGroupName].AvailabilityDatabases[$db.Name].Drop()
                            Write-Message -Level VeryVerbose -Message "Successfully removed $db from AG [$agname] on $server"
                        } catch {
                            Stop-Function -Message "Could not remove $db from AG [$agname] on $server" -ErrorRecord $_ -Target $server -Continue
                        }
                    }
                }

                # DBA 101 should encourage detaching just OFFLINE databases
                # we can do that here
                if ($Pscmdlet.ShouldProcess($server, "Detaching $db")) {
                    if ($db_status.Status -ne 'OFFLINE') {
                        $null = Edit-DatabaseState -sqlinstance $server -dbname $db.Name -opt "OFFLINE" -immediate $true
                    }
                    try {
                        $sql = "EXEC master.dbo.sp_detach_db N'$($db.Name)'"
                        Write-Message -Level System -Message $sql
                        $null = $server.Query($sql)
                        $db_status.Status = 'DETACHED'
                    } catch {
                        Stop-Function -Message "Failed to detach $db" -ErrorRecord $_ -Target $server -Continue
                        $warn += "Failed to detach"
                    }

                }

            }
            if ($warn) {
                $warn = $warn | Get-Unique
                $warn = $warn -Join ';'
            } else {
                $warn = $null
            }
            if ($Detached -eq $true) {
                [PSCustomObject]@{
                    ComputerName = $server.ComputerName
                    InstanceName = $server.ServiceName
                    SqlInstance  = $server.DomainInstanceName
                    DatabaseName = $db.Name
                    RW           = $db_status.RW
                    Status       = $db_status.Status
                    Access       = $db_status.Access
                    Notes        = $warn
                    Database     = $db
                } | Select-DefaultView -ExcludeProperty Database
            } else {
                $db.Refresh()
                if ($null -eq $warn) {
                    # we avoid reenumerating properties
                    $newstate = $db_status
                } else {
                    $newstate = Get-DbState -databaseName $db.Name -dbStatuses $stateCache[$server]
                }

                [PSCustomObject]@{
                    ComputerName = $server.ComputerName
                    InstanceName = $server.ServiceName
                    SqlInstance  = $server.DomainInstanceName
                    DatabaseName = $db.Name
                    RW           = $newstate.RW
                    Status       = $newstate.Status
                    Access       = $newstate.Access
                    Notes        = $warn
                    Database     = $db
                } | Select-DefaultView -ExcludeProperty Database
            }
        }

    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Set-DbaDatabaseState
    }
}

tools\dbatools\functions\Start-DbaXESession.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Start-DbaXESession {
    <#
    .SYNOPSIS
        Starts Extended Events sessions.

    .DESCRIPTION
        This script starts Extended Events sessions on a SQL Server instance.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2008 or higher.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Session
        Only start specific Extended Events sessions.

    .PARAMETER AllSessions
        Start all Extended Events sessions on an instance, ignoring the packaged sessions: AlwaysOn_health, system_health, telemetry_xevents.

    .PARAMETER InputObject
        Internal parameter to support piping from Get-DbaXESession

    .PARAMETER StopAt
        Specifies a datetime at which the session will be stopped. This is done via a self-deleting schedule.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: ExtendedEvent, XE, XEvent
        Author: Doug Meyers

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Start-DbaXESession

    .EXAMPLE
        PS C:\> Start-DbaXESession -SqlInstance sqlserver2012 -AllSessions

        Starts all Extended Event Session on the sqlserver2014 instance.

    .EXAMPLE
        PS C:\> Start-DbaXESession -SqlInstance sqlserver2012 -Session xesession1,xesession2

        Starts the xesession1 and xesession2 Extended Event sessions.

    .EXAMPLE
        PS C:\> Start-DbaXESession -SqlInstance sqlserver2012 -Session xesession1,xesession2 -StopAt (Get-Date).AddMinutes(30)

        Starts the xesession1 and xesession2 Extended Event sessions and stops them in 30 minutes.

    .EXAMPLE
        PS C:\> Get-DbaXESession -SqlInstance sqlserver2012 -Session xesession1 | Start-DbaXESession

        Starts the sessions returned from the Get-DbaXESession function.

    #>
    [CmdletBinding(SupportsShouldProcess, DefaultParameterSetName = 'Session')]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseSingularNouns", "", Justification = "Internal functions are ignored")]
    param (
        [parameter(Position = 1, Mandatory, ParameterSetName = 'Session')]
        [parameter(Position = 1, Mandatory, ParameterSetName = 'All')]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [parameter(ParameterSetName = 'Session')]
        [parameter(ParameterSetName = 'All')]
        [PSCredential]$SqlCredential,
        [parameter(Mandatory, ParameterSetName = 'Session')]
        [Alias("Sessions")]
        [object[]]$Session,
        [datetime]$StopAt,
        [parameter(Mandatory, ParameterSetName = 'All')]
        [switch]$AllSessions,
        [parameter(Mandatory, ValueFromPipeline, ParameterSetName = 'Object')]
        [Microsoft.SqlServer.Management.XEvent.Session[]]$InputObject,
        [switch]$EnableException
    )

    begin {
        # Start each XESession
        function Start-XESessions {
            [CmdletBinding(SupportsShouldProcess)]
            param ([Microsoft.SqlServer.Management.XEvent.Session[]]$xeSessions)

            foreach ($xe in $xeSessions) {
                $instance = $xe.Parent.Name
                $session = $xe.Name

                if (-Not $xe.isRunning) {
                    Write-Message -Level Verbose -Message "Starting XEvent Session $session on $instance."
                    if ($Pscmdlet.ShouldProcess("$instance", "Starting XEvent Session $session")) {
                        try {
                            $xe.Start()
                        } catch {
                            Stop-Function -Message "Could not start XEvent Session on $instance." -Target $session -ErrorRecord $_ -Continue
                        }
                    }
                } else {
                    Write-Message -Level Warning -Message "$session on $instance is already running."
                }
                Get-DbaXESession -SqlInstance $xe.Parent -Session $session
            }
        }

        function New-StopJob {
            [CmdletBinding(SupportsShouldProcess)]
            param (
                [Microsoft.SqlServer.Management.XEvent.Session[]]$xeSessions,
                [datetime]$StopAt
            )

            foreach ($xe in $xeSessions) {
                $server = $xe.Parent
                $session = $xe.Name
                $name = "XE Session Stop - $session"
                if ($Pscmdlet.ShouldProcess("$Server", "Making New XEvent StopJob for $session")) {
                    # Setup the schedule time
                    $time = $(($StopAt).ToString("HHmmss"))

                    # Create the schedule
                    $schedule = New-DbaAgentSchedule -SqlInstance $server -Schedule $name -FrequencyType Once -StartTime $time -Force

                    # Create the job and attach the schedule
                    $job = New-DbaAgentJob -SqlInstance $server -Job $name -Schedule $schedule -DeleteLevel Always -Force

                    # Create the job step
                    $sql = "ALTER EVENT SESSION [$session] ON SERVER STATE = stop;"
                    #Variable $jobstep marked as unused by PSScriptAnalyzer replace with $null to catch output
                    $null = New-DbaAgentJobStep -SqlInstance $server -Job $job -StepName 'T-SQL Stop' -Subsystem TransactSql -Command $sql -Force
                }
            }
        }
    }
    process {
        if ($InputObject) {
            Start-XESessions $InputObject
        } else {
            foreach ($instance in $SqlInstance) {
                $xeSessions = Get-DbaXESession -SqlInstance $instance -SqlCredential $SqlCredential

                # Filter xeSessions based on parameters
                if ($Session) {
                    $xeSessions = $xeSessions | Where-Object { $_.Name -in $Session }
                } elseif ($AllSessions) {
                    $systemSessions = @('AlwaysOn_health', 'system_health', 'telemetry_xevents')
                    $xeSessions = $xeSessions | Where-Object { $_.Name -notin $systemSessions }
                }

                if ($Pscmdlet.ShouldProcess("$instance", "Configuring XEvent Session $session to start")) {
                    Start-XESessions $xeSessions

                    if ($StopAt) {
                        New-StopJob -xeSessions $xeSessions -StopAt $stopat
                    }
                }
            }
        }
    }
}

tools\dbatools\functions\Start-DbaXESmartTarget.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Start-DbaXESmartTarget {
    <#
    .SYNOPSIS
        XESmartTarget runs as a client application for an Extended Events session running on a SQL Server instance.

    .DESCRIPTION
        XESmartTarget offers the ability to set up complex actions in response to Extended Events captured in sessions, without writing a single line of code.

        See more at https://github.com/spaghettidba/XESmartTarget/wiki

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2008 or higher.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Session
        Name of the Extended Events session to attach to.

        You can monitor a single session with an instance of XESmartTarget. In case you need to perform action on multiple sessions, run an additional instance of XESmartTarget, with its own configuration file.

    .PARAMETER Database
        Specifies the name of the database that contains the target table.

    .PARAMETER FailOnProcessingError
        If this switch is enabled, the a processing error will trigger a failure.

    .PARAMETER Responder
        The list of responses can include zero or more Response objects, each to be configured by specifying values for their public members.

    .PARAMETER Template
        Path to the dbatools built-in templates

    .PARAMETER NotAsJob
        If this switch is enabled, output will be sent to screen indefinitely. BY default, a job will be run in the background.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: ExtendedEvent, XE, XEvent
        Author: Chrissy LeMaire (@cl) | SmartTarget by Gianluca Sartori (@spaghettidba)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Start-DbaXESmartTarget

    .EXAMPLE
        PS C:\>$response = New-DbaXESmartQueryExec -SqlInstance sql2017 -Database dbadb -Query "update table set whatever = 1"
        PS C:\>Start-DbaXESmartTarget -SqlInstance sql2017 -Session deadlock_tracker -Responder $response

        Executes a T-SQL command against dbadb on sql2017 whenever a deadlock event is recorded.

    .EXAMPLE
        PS C:\>$response = New-DbaXESmartQueryExec -SqlInstance sql2017 -Database dbadb -Query "update table set whatever = 1"
        PS C:\>$params = @{
        >> SmtpServer = "smtp.ad.local"
        >> To = "[email protected]"
        >> Sender = "[email protected]"
        >> Subject = "Query executed"
        >> Body = "Query executed at {collection_time}"
        >> Attachment = "batch_text"
        >> AttachmentFileName = "query.sql"
        >> }
        PS C:\> $emailresponse = New-DbaXESmartEmail @params
        PS C:\> Start-DbaXESmartTarget -SqlInstance sql2017 -Session querytracker -Responder $response, $emailresponse

        Executes a T-SQL command against dbadb on sql2017 and sends an email whenever a querytracker event is recorded.

    .EXAMPLE
        PS C:\> $columns = "cpu_time", "duration", "physical_reads", "logical_reads", "writes", "row_count", "batch_text"
        PS C:\> $response = New-DbaXESmartTableWriter -SqlInstance sql2017 -Database dbadb -Table deadlocktracker -OutputColumns $columns -Filter "duration > 10000"
        PS C:\> Start-DbaXESmartTarget -SqlInstance sql2017 -Session deadlock_tracker -Responder $response

        Writes Extended Events to the deadlocktracker table in dbadb on sql2017.

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string]$Database,
        [parameter(Mandatory)]
        [string]$Session,
        [switch]$FailOnProcessingError,
        [object[]]$Responder,
        [string[]]$Template,
        [switch]$NotAsJob,
        [switch]$EnableException
    )
    begin {
        function Start-SmartFunction {
            [CmdletBinding(SupportsShouldProcess)]
            param (
                [parameter(Mandatory, ValueFromPipeline)]
                [Alias("ServerInstance", "SqlServer")]
                [DbaInstanceParameter[]]$SqlInstance,
                [PSCredential]$SqlCredential,
                [string]$Database,
                [parameter(Mandatory)]
                [string]$Session,
                [switch]$FailOnProcessingError,
                [object[]]$Responder,
                [string[]]$Template,
                [switch]$NotAsJob,
                [switch]$EnableException
            )
            begin {
                try {
                    Add-Type -Path "$script:PSModuleRoot\bin\XESmartTarget\XESmartTarget.Core.dll" -ErrorAction Stop
                } catch {
                    Stop-Function -Message "Could not load XESmartTarget.Core.dll" -ErrorRecord $_ -Target "XESmartTarget"
                    return
                }
            }
            process {
                if (Test-FunctionInterrupt) { return }

                foreach ($instance in $SqlInstance) {
                    try {
                        $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 11
                    } catch {
                        Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
                    }

                    $target = New-Object -TypeName XESmartTarget.Core.Target
                    $target.ServerName = $instance
                    $target.SessionName = $Session
                    $target.FailOnProcessingError = $FailOnProcessingError

                    if ($SqlCredential) {
                        $target.UserName = $SqlCredential.UserName
                        $target.Password = $SqlCredential.GetNetworkCredential().Password
                    }

                    foreach ($response in $Responder) {
                        $target.Responses.Add($response)
                    }

                    if ($Pscmdlet.ShouldProcess("$instance", "Starting SmartTarget on $($server.name)")) {
                        try {
                            $target.Start()
                        } catch {
                            $message = $_.Exception.InnerException.InnerException | Out-String

                            if ($message) {
                                Stop-Function -Message $message -Target "XESmartTarget" -Continue
                            } else {
                                Stop-Function -Message "Failure" -Target "XESmartTarget" -ErrorRecord $_ -Continue
                            }
                        }
                    }
                }
            }
        }
    }
    process {
        foreach ($instance in $SqlInstance) {
            if (-not ($xesession = Get-DbaXESession -SqlInstance $instance -SqlCredential $SqlCredential -Session $Session)) {
                Stop-Function -Message "Session $Session does not exist on $instance."
                return
            }
            if ($xesession.Status -ne "Running") {
                Stop-Function -Message "Session $Session on $instance is not running."
                return
            }
        }
        if ($Pscmdlet.ShouldProcess("$instance", "Configuring SmartTarget to start")) {
            if ($NotAsJob) {
                Start-SmartFunction @PSBoundParameters
            } else {
                $date = (Get-Date -UFormat "%H%M%S") #"%m%d%Y%H%M%S"
                Start-Job -Name "XESmartTarget-$session-$date" -ArgumentList $PSBoundParameters, $script:PSModuleRoot -ScriptBlock {
                    param (
                        $Parameters,
                        $ModulePath
                    )
                    Import-Module "$ModulePath\dbatools.psd1"
                    Add-Type -Path "$ModulePath\bin\XESmartTarget\XESmartTarget.Core.dll" -ErrorAction Stop
                    $params = @{
                        SqlInstance = $Parameters.SqlInstance.InputObject
                        Database    = $Parameters.Database
                        Session     = $Parameters.Session
                        Responder   = @()
                    }
                    if ($Parameters.SqlCredential) {
                        $params["SqlCredential"] = $Parameters.SqlCredential
                    }
                    foreach ($responder in $Parameters.Responder) {
                        $typename = $responder.PSObject.TypeNames[0] -replace "^Deserialized\.", ""
                        $newResponder = New-Object -TypeName $typename
                        foreach ($property in $responder.PSObject.Properties) {
                            if ($property.Value) {
                                if ($property.Value -is [Array]) {
                                    $name = $property.Name
                                    $newResponder.$name = [object[]]$property.Value
                                } else {
                                    $name = $property.Name
                                    $newResponder.$name = $property.Value
                                }
                            }

                        }
                        $params["Responder"] += $newResponder
                    }

                    Start-DbaXESmartTarget @params -NotAsJob -FailOnProcessingError
                } | Select-Object -Property ID, Name, State
            }
        }
    }
}

tools\dbatools\functions\Stop-DbaAgentJob.ps1

function Stop-DbaAgentJob {
    <#
    .SYNOPSIS
        Stops a running SQL Server Agent Job.

    .DESCRIPTION
        This command stops a job then returns connected SMO object for SQL Agent Job information for each instance(s) of SQL Server.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Job
        The job(s) to process - this list is auto-populated from the server. If unspecified, all jobs will be processed.

    .PARAMETER ExcludeJob
        The job(s) to exclude - this list is auto-populated from the server.

    .PARAMETER Wait
        Wait for output until the job has completely stopped

    .PARAMETER InputObject
        Internal parameter that enables piping

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Job, Agent
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Stop-DbaAgentJob

    .EXAMPLE
        PS C:\> Stop-DbaAgentJob -SqlInstance localhost

        Stops all running SQL Agent Jobs on the local SQL Server instance

    .EXAMPLE
        PS C:\> Get-DbaAgentJob -SqlInstance sql2016 -Job cdc.DBWithCDC_capture | Stop-DbaAgentJob

        Stops the cdc.DBWithCDC_capture SQL Agent Job on sql2016

    .EXAMPLE
        PS C:\> Stop-DbaAgentJob -SqlInstance sql2016 -Job cdc.DBWithCDC_capture

        Stops the cdc.DBWithCDC_capture SQL Agent Job on sql2016

    #>
    [CmdletBinding(SupportsShouldProcess, DefaultParameterSetName = "Default")]
    param (
        [parameter(Mandatory, ParameterSetName = "Instance")]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$Job,
        [string[]]$ExcludeJob,
        [parameter(Mandatory, ValueFromPipeline, ParameterSetName = "Object")]
        [Microsoft.SqlServer.Management.Smo.Agent.Job[]]$InputObject,
        [switch]$Wait,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $InputObject += $server.JobServer.Jobs

            if ($Job) {
                $InputObject = $InputObject | Where-Object Name -In $Job
            }
            if ($ExcludeJob) {
                $InputObject = $InputObject | Where-Object Name -NotIn $ExcludeJob
            }
        }

        foreach ($currentjob in $InputObject) {

            $server = $currentjob.Parent.Parent
            $status = $currentjob.CurrentRunStatus

            if ($status -eq 'Idle') {
                Stop-Function -Message "$currentjob on $server is idle ($status)" -Target $currentjob -Continue
            }

            If ($Pscmdlet.ShouldProcess($server, "Stopping job $currentjob")) {
                $null = $currentjob.Stop()
                Start-Sleep -Milliseconds 300
                $currentjob.Refresh()

                $waits = 0
                while ($currentjob.CurrentRunStatus -ne 'Idle' -and $waits++ -lt 10) {
                    Start-Sleep -Milliseconds 100
                    $currentjob.Refresh()
                }

                if ($wait) {
                    while ($currentjob.CurrentRunStatus -ne 'Idle') {
                        Write-Message -Level Output -Message "$currentjob is $($currentjob.CurrentRunStatus)"
                        Start-Sleep -Seconds 3
                        $currentjob.Refresh()
                    }
                    $currentjob
                } else {
                    $currentjob
                }
            }
        }
    }
}

tools\dbatools\functions\Set-DbaDbRecoveryModel.ps1

function Set-DbaDbRecoveryModel {
    <#
    .SYNOPSIS
        Set-DbaDbRecoveryModel sets the Recovery Model.

    .DESCRIPTION
        Set-DbaDbRecoveryModel sets the Recovery Model for user databases.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The database(s) to process - this list is auto-populated from the server. if unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto-populated from the server

    .PARAMETER AllDatabases
        This is a parameter that was included for safety, so you don't accidentally set options on all databases without specifying

    .PARAMETER RecoveryModel
        Recovery Model to be set. Valid options are 'Simple', 'Full', 'BulkLogged'

        Details about the recovery models can be found here:
        https://docs.microsoft.com/en-us/sql/relational-databases/backup-restore/recovery-models-sql-server

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        Prompts for confirmation. For example:

        Are you sure you want to perform this action?
        Performing the operation "ALTER DATABASE [model] SET RECOVERY Full" on target "[model] on WERES14224".
        [Y] Yes  [A] Yes to All  [N] No  [L] No to All  [S] Suspend  [?] Help (default is "Y"):

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER InputObject
        A collection of databases (such as returned by Get-DbaDatabase)

    .NOTES
        Tags: RecoveryModel, Database
        Author: Viorel Ciucu (@viorelciucu), https://www.cviorel.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Set-DbaDbRecoveryModel

    .EXAMPLE
        PS C:\> Set-DbaDbRecoveryModel -SqlInstance sql2014 -RecoveryModel BulkLogged -Database model -Confirm:$true -Verbose

        Sets the Recovery Model to BulkLogged for database [model] on SQL Server instance sql2014. User is requested to confirm the action.

    .EXAMPLE
        PS C:\> Get-DbaDatabase -SqlInstance sql2014 -Database TestDB | Set-DbaDbRecoveryModel -RecoveryModel Simple  -Confirm:$false

        Sets the Recovery Model to Simple for database [TestDB] on SQL Server instance sql2014. Confirmation is not required.

    .EXAMPLE
        PS C:\> Set-DbaDbRecoveryModel -SqlInstance sql2014 -RecoveryModel Simple -Database TestDB -Confirm:$false

        Sets the Recovery Model to Simple for database [TestDB] on SQL Server instance sql2014. Confirmation is not required.

    .EXAMPLE
        PS C:\> Set-DbaDbRecoveryModel -SqlInstance sql2014 -RecoveryModel Simple -AllDatabases -Confirm:$false

        Sets the Recovery Model to Simple for ALL uses databases MODEL database on SQL Server instance sql2014. Runs without asking for confirmation.

    .EXAMPLE
        PS C:\> Set-DbaDbRecoveryModel -SqlInstance sql2014 -RecoveryModel BulkLogged -Database TestDB1, TestDB2 -Confirm:$false -Verbose

        Sets the Recovery Model to BulkLogged for [TestDB1] and [TestDB2] databases on SQL Server instance sql2014. Runs without asking for confirmation.

       #>
    [CmdletBinding(DefaultParameterSetName = "Default", SupportsShouldProcess, ConfirmImpact = 'High')]
    param (
        [parameter(Mandatory, ParameterSetName = "Instance")]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstance[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [parameter(Mandatory)]
        [ValidateSet('Simple', 'Full', 'BulkLogged')]
        [string]$RecoveryModel,
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [switch]$AllDatabases,
        [switch]$EnableException,
        [parameter(Mandatory, ValueFromPipeline, ParameterSetName = "Pipeline")]
        [Microsoft.SqlServer.Management.Smo.Database[]]$InputObject
    )
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            if (!$Database -and !$AllDatabases -and !$ExcludeDatabase) {
                Stop-Function -Message "You must specify -AllDatabases or -Database to continue"
                return
            }

            # We need to be able to change the RecoveryModel for model database
            $systemdbs = @("tempdb")
            $databases = $server.Databases | Where-Object { $systemdbs -notcontains $_.Name -and $_.IsAccessible }

            # filter collection based on -Database/-Exclude parameters
            if ($Database) {
                $databases = $databases | Where-Object Name -In $Database
            }

            if ($ExcludeDatabase) {
                $databases = $databases | Where-Object Name -NotIn $ExcludeDatabase
            }

            if (!$databases) {
                Stop-Function -Message "The database(s) you specified do not exist on the instance $instance."
                return
            }

            $InputObject += $databases
        }

        foreach ($db in $InputObject) {
            if ($db.RecoveryModel -eq $RecoveryModel) {
                Stop-Function -Message "Recovery Model for database $db is already set to $RecoveryModel" -Category ConnectionError -Target $instance -Continue
            } else {
                if ($Pscmdlet.ShouldProcess("$db on $instance", "ALTER DATABASE $db SET RECOVERY $RecoveryModel")) {
                    $db.RecoveryModel = $RecoveryModel
                    $db.Alter()
                    Write-Message -Level Verbose -Message "Recovery Model set to $RecoveryModel for database $db"
                }
            }
            Get-DbaDbRecoveryModel -SqlInstance $db.Parent -Database $db.name
        }
    }
}

tools\dbatools\functions\Stop-DbaPfDataCollectorSet.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Stop-DbaPfDataCollectorSet {
    <#
    .SYNOPSIS
        Stops Performance Monitor Data Collector Set.

    .DESCRIPTION
        Stops Performance Monitor Data Collector Set.

    .PARAMETER ComputerName
        The target computer. Defaults to localhost.

    .PARAMETER Credential
        Allows you to login to $ComputerName using alternative credentials. To use:

        $cred = Get-Credential, then pass $cred object to the -Credential parameter.

    .PARAMETER CollectorSet
        The name of the Collector Set to stop.

    .PARAMETER NoWait
        If this switch is enabled, the collector is stopped and the results are returned immediately.

    .PARAMETER InputObject
        Accepts the object output by Get-DbaPfDataCollectorSet via the pipeline.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: PerfMon
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Stop-DbaPfDataCollectorSet

    .EXAMPLE
        PS C:\> Stop-DbaPfDataCollectorSet

        Attempts to stop all ready Collectors on localhost.

    .EXAMPLE
        PS C:\> Stop-DbaPfDataCollectorSet -ComputerName sql2017

        Attempts to stop all ready Collectors on localhost.

    .EXAMPLE
        PS C:\> Stop-DbaPfDataCollectorSet -ComputerName sql2017, sql2016 -Credential ad\sqldba -CollectorSet 'System Correlation'

        Stops the 'System Correlation' Collector on sql2017 and sql2016 using alternative credentials.

    .EXAMPLE
        PS C:\> Get-DbaPfDataCollectorSet -CollectorSet 'System Correlation' | Stop-DbaPfDataCollectorSet

        Stops the 'System Correlation' Collector.

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [DbaInstance[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [Alias("DataCollectorSet")]
        [string[]]$CollectorSet,
        [parameter(ValueFromPipeline)]
        [object[]]$InputObject,
        [switch]$NoWait,
        [switch]$EnableException
    )
    begin {
        #Variable marked as unused by PSScriptAnalyzer
        #$sets = @()
        $wait = $NoWait -eq $false

        $setscript = {
            $setname = $args[0]; $wait = $args[1]
            $collectorset = New-Object -ComObject Pla.DataCollectorSet
            $collectorset.Query($setname, $null)
            $null = $collectorset.Stop($wait)
        }
    }
    process {
        
        
        if (-not $InputObject -or ($InputObject -and (Test-Bound -ParameterName ComputerName))) {
            foreach ($computer in $ComputerName) {
                $InputObject += Get-DbaPfDataCollectorSet -ComputerName $computer -Credential $Credential -CollectorSet $CollectorSet
            }
        }

        if ($InputObject) {
            if (-not $InputObject.DataCollectorSetObject) {
                Stop-Function -Message "InputObject is not of the right type. Please use Get-DbaPfDataCollectorSet."
                return
            }
        }

        # Check to see if its running first
        foreach ($set in $InputObject) {
            $setname = $set.Name
            $computer = $set.ComputerName
            $status = $set.State

            Write-Message -Level Verbose -Message "$setname on $ComputerName is $status."
            if ($status -ne "Running") {
                Stop-Function -Message "$setname on $computer is already stopped." -Continue
            }
            if ($Pscmdlet.ShouldProcess($computer, "Stoping Performance Monitor collection set")) {
                try {
                    Invoke-Command2 -ComputerName $computer -Credential $Credential -ScriptBlock $setscript -ArgumentList $setname, $wait -ErrorAction Stop
                } catch {
                    Stop-Function -Message "Failure stopping $setname on $computer." -ErrorRecord $_ -Target $computer -Continue
                }

                Get-DbaPfDataCollectorSet -ComputerName $computer -Credential $Credential -CollectorSet $setname
            }
        }
    }
}

tools\dbatools\functions\Stop-DbaProcess.ps1

function Stop-DbaProcess {
    <#
    .SYNOPSIS
        This command finds and kills SQL Server processes.

    .DESCRIPTION
        This command kills all spids associated with a spid, login, host, program or database.

        If you are attempting to kill your own login sessions, the process performing the kills will be skipped.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Spid
        Specifies one or more spids to be killed. Options for this parameter are auto-populated from the server.

    .PARAMETER Login
        Specifies one or more login names whose processes will be killed. Options for this parameter are auto-populated from the server and only login names that have active processes are offered.

    .PARAMETER Hostname
        Specifies one or more client hostnames whose processes will be killed. Options for this parameter are auto-populated from the server and only hostnames that have active processes are offered.

    .PARAMETER Program
        Specifies one or more client programs whose processes will be killed. Options for this parameter are auto-populated from the server and only programs that have active processes are offered.

    .PARAMETER Database
        Specifies one or more databases whose processes will be killed. Options for this parameter are auto-populated from the server and only databases that have active processes are offered.

        This parameter is auto-populated from -SqlInstance and allows only database names that have active processes. You can specify one or more Databases whose processes will be killed.

    .PARAMETER ExcludeSpid
        Specifies one or more spids which will not be killed. Options for this parameter are auto-populated from the server.

        Exclude is the last filter to run, so even if a spid matches (for example) Hosts, if it's listed in Exclude it wil be excluded.

    .PARAMETER InputObject
        This is the process object passed by Get-DbaProcess if using a pipeline.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Processes
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Stop-DbaProcess

    .EXAMPLE
        PS C:\> Stop-DbaProcess -SqlInstance sqlserver2014a -Login base\ctrlb, sa

        Finds all processes for base\ctrlb and sa on sqlserver2014a, then kills them. Uses Windows Authentication to login to sqlserver2014a.

    .EXAMPLE
        PS C:\> Stop-DbaProcess -SqlInstance sqlserver2014a -SqlCredential $credential -Spid 56, 77

        Finds processes for spid 56 and 57, then kills them. Uses alternative (SQL or Windows) credentials to login to sqlserver2014a.

    .EXAMPLE
        PS C:\> Stop-DbaProcess -SqlInstance sqlserver2014a -Program 'Microsoft SQL Server Management Studio'

        Finds processes that were created in Microsoft SQL Server Management Studio, then kills them.

    .EXAMPLE
        PS C:\> Stop-DbaProcess -SqlInstance sqlserver2014a -Hostname workstationx, server100

        Finds processes that were initiated (computers/clients) workstationx and server 1000, then kills them.

    .EXAMPLE
        PS C:\> Stop-DbaProcess -SqlInstance sqlserver2014  -Database tempdb -WhatIf

        Shows what would happen if the command were executed.

    .EXAMPLE
        PS C:\> Get-DbaProcess -SqlInstance sql2016 -Program 'dbatools PowerShell module - dbatools.io' | Stop-DbaProcess

        Finds processes that were created with dbatools, then kills them.

    #>
    [CmdletBinding(DefaultParameterSetName = "Default", SupportsShouldProcess)]
    param (
        [parameter(Mandatory, ParameterSetName = "Server")]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [int[]]$Spid,
        [int[]]$ExcludeSpid,
        [string[]]$Database,
        [string[]]$Login,
        [string[]]$Hostname,
        [string[]]$Program,
        [parameter(ValueFromPipeline, Mandatory, ParameterSetName = "Process")]
        [object[]]$InputObject,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        if (Test-FunctionInterrupt) { return }

        if (!$InputObject) {
            $InputObject = Get-DbaProcess @PSBoundParameters
        }

        foreach ($session in $InputObject) {
            $sourceserver = $session.Parent

            if (!$sourceserver) {
                Stop-Function -Message "Only process objects can be passed through the pipeline." -Category InvalidData -Target $session
                return
            }

            $currentspid = $session.spid

            if ($sourceserver.ConnectionContext.ProcessID -eq $currentspid) {
                Write-Message -Level Warning -Message "Skipping spid $currentspid because you cannot use KILL to kill your own process." -Target $session
                Continue
            }

            if ($Pscmdlet.ShouldProcess($sourceserver, "Killing spid $currentspid")) {
                try {
                    $sourceserver.KillProcess($currentspid)
                    [pscustomobject]@{
                        SqlInstance = $sourceserver.name
                        Spid        = $session.Spid
                        Login       = $session.Login
                        Host        = $session.Host
                        Database    = $session.Database
                        Program     = $session.Program
                        Status      = 'Killed'
                    }
                } catch {
                    Stop-Function -Message "Couldn't kill spid $currentspid." -Target $session -ErrorRecord $_ -Continue
                }
            }
        }
    }
}

tools\dbatools\functions\Stop-DbaService.ps1

function Stop-DbaService {
    <#
    .SYNOPSIS
        Stops SQL Server services on a computer.

    .DESCRIPTION
        Stops the SQL Server related services on one or more computers. Will follow SQL Server service dependencies.

        Requires Local Admin rights on destination computer(s).

    .PARAMETER ComputerName
        The target SQL Server instance or instances.

    .PARAMETER InstanceName
        Only affects services that belong to the specific instances.

    .PARAMETER Credential
        Credential object used to connect to the computer as a different user.

    .PARAMETER Type
        Use -Type to collect only services of the desired SqlServiceType.
        Can be one of the following: "Agent","Browser","Engine","FullText","SSAS","SSIS","SSRS"

    .PARAMETER Timeout
        How long to wait for the start/stop request completion before moving on. Specify 0 to wait indefinitely.

    .PARAMETER InputObject
        A collection of services from Get-DbaService

    .PARAMETER Force
        Use this switch to stop dependent services before proceeding with the specified service

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER WhatIf
        Shows what would happen if the cmdlet runs. The cmdlet is not run.

    .PARAMETER Confirm
        Prompts you for confirmation before running the cmdlet.

    .PARAMETER Force
        Will stop dependent SQL Server agents when stopping Engine services.

    .NOTES
        Tags: Service, Stop
        Author: Kirill Kravtsov (@nvarscar)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        Requires Local Admin rights on destination computer(s).

    .LINK
        https://dbatools.io/Stop-DbaService

    .EXAMPLE
        PS C:\> Stop-DbaService -ComputerName sqlserver2014a

        Stops the SQL Server related services on computer sqlserver2014a.

    .EXAMPLE
        PS C:\> 'sql1','sql2','sql3'| Get-DbaService | Stop-DbaService

        Gets the SQL Server related services on computers sql1, sql2 and sql3 and stops them.

    .EXAMPLE
        PS C:\> Stop-DbaService -ComputerName sql1,sql2 -Instance MSSQLSERVER

        Stops the SQL Server services related to the default instance MSSQLSERVER on computers sql1 and sql2.

    .EXAMPLE
        PS C:\> Stop-DbaService -ComputerName $MyServers -Type SSRS

        Stops the SQL Server related services of type "SSRS" (Reporting Services) on computers in the variable MyServers.

    .EXAMPLE
        PS C:\> Stop-DbaService -ComputerName sql1 -Type Engine -Force

        Stops SQL Server database engine services on sql1 forcing dependent SQL Server Agent services to stop as well.

    #>
    [CmdletBinding(DefaultParameterSetName = "Server", SupportsShouldProcess)]
    param (
        [Parameter(ParameterSetName = "Server", Position = 1)]
        [Alias("cn", "host", "Server")]
        [DbaInstanceParameter[]]$ComputerName = $env:COMPUTERNAME,
        [Alias("Instance")]
        [string[]]$InstanceName,
        [ValidateSet("Agent", "Browser", "Engine", "FullText", "SSAS", "SSIS", "SSRS")]
        [string[]]$Type,
        [parameter(ValueFromPipeline, Mandatory, ParameterSetName = "Service")]
        [Alias("ServiceCollection")]
        [object[]]$InputObject,
        [int]$Timeout = 60,
        [PSCredential]$Credential,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {
        $processArray = @()
        if ($PsCmdlet.ParameterSetName -eq "Server") {
            $serviceParams = @{ ComputerName = $ComputerName }
            if ($InstanceName) { $serviceParams.InstanceName = $InstanceName }
            if ($Type) { $serviceParams.Type = $Type }
            if ($Credential) { $serviceParams.Credential = $Credential }
            if ($EnableException) { $serviceParams.Silent = $EnableException }
            $InputObject = Get-DbaService @serviceParams
        }
    }
    process {
        #Get all the objects from the pipeline before proceeding
        $processArray += $InputObject
    }
    end {
        $processArray = [array]($processArray | Where-Object { (!$InstanceName -or $_.InstanceName -in $InstanceName) -and (!$Type -or $_.ServiceType -in $Type) })
        foreach ($service in $processArray) {
            if ($Force -and $service.ServiceType -eq 'Engine' -and !($processArray | Where-Object { $_.ServiceType -eq 'Agent' -and $_.InstanceName -eq $service.InstanceName -and $_.ComputerName -eq $service.ComputerName })) {
                #Construct parameters to call Get-DbaService
                $serviceParams = @{
                    ComputerName = $service.ComputerName
                    InstanceName = $service.InstanceName
                    Type         = 'Agent'
                }
                if ($Credential) { $serviceParams.Credential = $Credential }
                if ($EnableException) { $serviceParams.EnableException = $EnableException }
                $processArray += @(Get-DbaService @serviceParams)
            }
        }
        if ($PSCmdlet.ShouldProcess("$ProcessArray", "Stopping Service")) {
            if ($processArray) {
                Update-ServiceStatus -InputObject $processArray -Action 'stop' -Timeout $Timeout -EnableException $EnableException
            } else {
                Stop-Function -EnableException $EnableException -Message "No SQL Server services found with current parameters." -Category ObjectNotFound
            }
        }
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Stop-DbaSqlService
    }
}

tools\dbatools\functions\Stop-DbaTrace.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Stop-DbaTrace {
    <#
    .SYNOPSIS
        Stops SQL Server traces

    .DESCRIPTION
        Stops SQL Server traces

    .PARAMETER SqlInstance
        The target SQL Server instance

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Id
        A list of trace ids

    .PARAMETER InputObject
        Internal parameter for piping

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Security, Trace
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Stop-DbaTrace -SqlInstance sql2008

        Stops all traces on sql2008

    .EXAMPLE
        PS C:\> Stop-DbaTrace -SqlInstance sql2008 -Id 1

        Stops all trace with ID 1 on sql2008

    .EXAMPLE
        PS C:\> Get-DbaTrace -SqlInstance sql2008 | Out-GridView -PassThru | Stop-DbaTrace

        Stops selected traces on sql2008

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [int[]]$Id,
        [parameter(ValueFromPipeline)]
        [object[]]$InputObject,
        [switch]$EnableException
    )
    process {
        if (-not $InputObject -and $SqlInstance) {
            $InputObject = Get-DbaTrace -SqlInstance $SqlInstance -SqlCredential $SqlCredential -Id $Id
        }

        foreach ($trace in $InputObject) {
            if (-not $trace.id -and -not $trace.Parent) {
                Stop-Function -Message "Input is of the wrong type. Use Get-DbaTrace." -Continue
                return
            }

            $server = $trace.Parent
            $traceid = $trace.id
            $default = Get-DbaTrace -SqlInstance $server -Default

            if ($default.id -eq $traceid) {
                Stop-Function -Message "The default trace on $server cannot be stopped. Use Set-DbaSpConfigure to turn it off." -Continue
            }

            $sql = "sp_trace_setstatus $traceid, 0"

            if ($Pscmdlet.ShouldProcess($traceid, "Stopping the TraceID on $server")) {
                try {
                    $server.Query($sql)
                    $output = Get-DbaTrace -SqlInstance $server -Id $traceid
                    if (-not $output) {
                        $output = [PSCustomObject]@{
                            ComputerName      = $server.ComputerName
                            InstanceName      = $server.ServiceName
                            SqlInstance       = $server.DomainInstanceName
                            Id                = $traceid
                            Status            = $null
                            IsRunning         = $false
                            Path              = $null
                            MaxSize           = $null
                            StopTime          = $null
                            MaxFiles          = $null
                            IsRowset          = $null
                            IsRollover        = $null
                            IsShutdown        = $null
                            IsDefault         = $null
                            BufferCount       = $null
                            BufferSize        = $null
                            FilePosition      = $null
                            ReaderSpid        = $null
                            StartTime         = $null
                            LastEventTime     = $null
                            EventCount        = $null
                            DroppedEventCount = $null
                            Parent            = $server
                        } | Select-DefaultView -Property 'ComputerName', 'InstanceName', 'SqlInstance', 'Id', 'IsRunning'
                    }
                    $output
                } catch {
                    Stop-Function -Message "Failure" -ErrorRecord $_ -Target $server -Continue
                    return
                }
            }
        }
    }
}

tools\dbatools\functions\Stop-DbaXESession.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Stop-DbaXESession {
    <#
    .SYNOPSIS
        Stops Extended Events sessions.

    .DESCRIPTION
        This script stops Extended Events sessions on a SQL Server instance.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2008 or higher.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Session
        Specifies individual Extended Events sessions to stop.

    .PARAMETER AllSessions
        If this switch is enabled, all Extended Events sessions will be stopped except the packaged sessions AlwaysOn_health, system_health, telemetry_xevents.

    .PARAMETER InputObject
        Accepts the object output by Get-DbaXESession as the list of sessions to be stopped.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: ExtendedEvent, XE, XEvent
        Author: Doug Meyers

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Stop-DbaXESession

    .EXAMPLE
        PS C:\> Stop-DbaXESession -SqlInstance sqlserver2012 -AllSessions

        Stops all Extended Event Session on the sqlserver2014 instance.

    .EXAMPLE
        PS C:\> Stop-DbaXESession -SqlInstance sqlserver2012 -Session xesession1,xesession2

        Stops the xesession1 and xesession2 Extended Event sessions.

    .EXAMPLE
        PS C:\> Get-DbaXESession -SqlInstance sqlserver2012 -Session xesession1 | Stop-DbaXESession

        Stops the sessions returned from the Get-DbaXESession function.

    #>
    [CmdletBinding(SupportsShouldProcess, DefaultParameterSetName = 'Session')]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseSingularNouns", "", Justification = "Internal functions are ignored")]
    param (
        [parameter(Position = 1, Mandatory, ParameterSetName = 'Session')]
        [parameter(Position = 1, Mandatory, ParameterSetName = 'All')]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,

        [parameter(ParameterSetName = 'Session')]
        [parameter(ParameterSetName = 'All')]
        [PSCredential]$SqlCredential,

        [parameter(Mandatory, ParameterSetName = 'Session')]
        [Alias("Sessions")]
        [object[]]$Session,

        [parameter(Mandatory, ParameterSetName = 'All')]
        [switch]$AllSessions,

        [parameter(Mandatory, ValueFromPipeline, ParameterSetName = 'Object')]
        [Microsoft.SqlServer.Management.XEvent.Session[]]$InputObject,
        [switch]$EnableException
    )

    begin {
        # Stop each XESession
        function Stop-XESessions {
            [CmdletBinding(SupportsShouldProcess)]
            param ([Microsoft.SqlServer.Management.XEvent.Session[]]$xeSessions)

            foreach ($xe in $xeSessions) {
                $instance = $xe.Parent.Name
                $session = $xe.Name
                if ($xe.isRunning) {
                    Write-Message -Level Verbose -Message "Stopping XEvent Session $session on $instance."
                    if ($Pscmdlet.ShouldProcess("$instance", "Stopping XEvent Session $session")) {
                        try {
                            $xe.Stop()
                        } catch {
                            Stop-Function -Message "Could not stop XEvent Session on $instance" -Target $session -ErrorRecord $_ -Continue
                        }
                    }
                } else {
                    Write-Message -Level Warning -Message "$session on $instance is already stopped"
                }
                Get-DbaXESession -SqlInstance $xe.Parent -Session $session
            }
        }
    }

    process {
        if ($InputObject) {
            if ($Pscmdlet.ShouldProcess("Configuring XEvent Sessions to stop")) {
                Stop-XESessions $InputObject
            }
        } else {
            foreach ($instance in $SqlInstance) {
                $xeSessions = Get-DbaXESession -SqlInstance $instance -SqlCredential $SqlCredential

                # Filter xesessions based on parameters
                if ($Session) {
                    $xeSessions = $xeSessions | Where-Object { $_.Name -in $Session }
                } elseif ($AllSessions) {
                    $systemSessions = @('AlwaysOn_health', 'system_health', 'telemetry_xevents')
                    $xeSessions = $xeSessions | Where-Object { $_.Name -notin $systemSessions }
                }

                if ($Pscmdlet.ShouldProcess("$instance", "Configuring XEvent Session $xeSessions to Stop")) {
                    Stop-XESessions $xeSessions
                }
            }
        }
    }
}

tools\dbatools\functions\Set-DbaDbQueryStoreOption.ps1

#ValidationTags#CodeStyle,Messaging,FlowControl,Pipeline#
function Set-DbaDbQueryStoreOption {
    <#
    .SYNOPSIS
        Configure Query Store settings for a specific or multiple databases.

    .DESCRIPTION
        Configure Query Store settings for a specific or multiple databases.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        SqlCredential object used to connect to the SQL Server as a different user.

    .PARAMETER Database
        The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto-populated from the server

    .PARAMETER AllDatabases
        Run command against all user databases

    .PARAMETER State
        Set the state of the Query Store. Valid options are "ReadWrite", "ReadOnly" and "Off".

    .PARAMETER FlushInterval
        Set the flush to disk interval of the Query Store in seconds.

    .PARAMETER CollectionInterval
        Set the runtime statistics collection interval of the Query Store in minutes.

    .PARAMETER MaxSize
        Set the maximum size of the Query Store in MB.

    .PARAMETER CaptureMode
        Set the query capture mode of the Query Store. Valid options are "Auto" and "All".

    .PARAMETER CleanupMode
        Set the query cleanup mode policy. Valid options are "Auto" and "Off".

    .PARAMETER StaleQueryThreshold
        Set the stale query threshold in days.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run

    .PARAMETER Confirm
        Prompts for confirmation of every step. For example:

        Are you sure you want to perform this action?
        Performing the operation "Changing Desired State" on target "pubs on SQL2016\VNEXT".
        [Y] Yes  [A] Yes to All  [N] No  [L] No to All  [S] Suspend  [?] Help (default is "Y"):

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: QueryStore
        Author: Enrico van de Laar (@evdlaar)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Set-DbaQueryStoreOptions

    .EXAMPLE
        PS C:\> Set-DbaDbQueryStoreOption -SqlInstance ServerA\SQL -State ReadWrite -FlushInterval 600 -CollectionInterval 10 -MaxSize 100 -CaptureMode All -CleanupMode Auto -StaleQueryThreshold 100 -AllDatabases

        Configure the Query Store settings for all user databases in the ServerA\SQL Instance.

    .EXAMPLE
        PS C:\> Set-DbaDbQueryStoreOption -SqlInstance ServerA\SQL -FlushInterval 600

        Only configure the FlushInterval setting for all Query Store databases in the ServerA\SQL Instance.

    .EXAMPLE
        PS C:\> Set-DbaDbQueryStoreOption -SqlInstance ServerA\SQL -Database AdventureWorks -State ReadWrite -FlushInterval 600 -CollectionInterval 10 -MaxSize 100 -CaptureMode all -CleanupMode Auto -StaleQueryThreshold 100

        Configure the Query Store settings for the AdventureWorks database in the ServerA\SQL Instance.

    .EXAMPLE
        PS C:\> Set-DbaDbQueryStoreOption -SqlInstance ServerA\SQL -Exclude AdventureWorks -State ReadWrite -FlushInterval 600 -CollectionInterval 10 -MaxSize 100 -CaptureMode all -CleanupMode Auto -StaleQueryThreshold 100

        Configure the Query Store settings for all user databases except the AdventureWorks database in the ServerA\SQL Instance.

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]
        $SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [switch]$AllDatabases,
        [ValidateSet('ReadWrite', 'ReadOnly', 'Off')]
        [string[]]$State,
        [int64]$FlushInterval,
        [int64]$CollectionInterval,
        [int64]$MaxSize,
        [ValidateSet('Auto', 'All')]
        [string[]]$CaptureMode,
        [ValidateSet('Auto', 'Off')]
        [string[]]$CleanupMode,
        [int64]$StaleQueryThreshold,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {
        $ExcludeDatabase += 'master', 'tempdb'
    }

    process {
        if (!$Database -and !$ExcludeDatabase -and !$AllDatabases) {
            Stop-Function -Message "You must specify a database(s) to execute against using either -Database, -ExcludeDatabase or -AllDatabases"
            return
        }

        if (!$State -and !$FlushInterval -and !$CollectionInterval -and !$MaxSize -and !$CaptureMode -and !$CleanupMode -and !$StaleQueryThreshold) {
            Stop-Function -Message "You must specify something to change."
            return
        }

        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 13

            } catch {
                Stop-Function -Message "Can't connect to $instance. Moving on." -Category InvalidOperation -InnerErrorRecord $_ -Target $instance -Continue
            }

            # We have to exclude all the system databases since they cannot have the Query Store feature enabled
            $dbs = Get-DbaDatabase -SqlInstance $server -ExcludeDatabase $ExcludeDatabase -Database $Database | Where-Object IsAccessible

            foreach ($db in $dbs) {
                Write-Message -Level Verbose -Message "Processing $($db.name) on $instance"

                if ($db.IsAccessible -eq $false) {
                    Write-Message -Level Warning -Message "The database $db on server $instance is not accessible. Skipping database."
                    continue
                }

                if ($State) {
                    if ($Pscmdlet.ShouldProcess("$db on $instance", "Changing DesiredState to $state")) {
                        $db.QueryStoreOptions.DesiredState = $State
                        $db.QueryStoreOptions.Alter()
                        $db.QueryStoreOptions.Refresh()
                    }
                }

                if ($db.QueryStoreOptions.DesiredState -eq "Off" -and (Test-Bound -Parameter State -Not)) {
                    Write-Message -Level Warning -Message "State is set to Off; cannot change values. Please update State to ReadOnly or ReadWrite."
                    continue
                }

                if ($FlushInterval) {
                    if ($Pscmdlet.ShouldProcess("$db on $instance", "Changing DataFlushIntervalInSeconds to $FlushInterval")) {
                        $db.QueryStoreOptions.DataFlushIntervalInSeconds = $FlushInterval
                    }
                }

                if ($CollectionInterval) {
                    if ($Pscmdlet.ShouldProcess("$db on $instance", "Changing StatisticsCollectionIntervalInMinutes to $CollectionInterval")) {
                        $db.QueryStoreOptions.StatisticsCollectionIntervalInMinutes = $CollectionInterval
                    }
                }

                if ($MaxSize) {
                    if ($Pscmdlet.ShouldProcess("$db on $instance", "Changing MaxStorageSizeInMB to $MaxSize")) {
                        $db.QueryStoreOptions.MaxStorageSizeInMB = $MaxSize
                    }
                }

                if ($CaptureMode) {
                    if ($Pscmdlet.ShouldProcess("$db on $instance", "Changing QueryCaptureMode to $CaptureMode")) {
                        $db.QueryStoreOptions.QueryCaptureMode = $CaptureMode
                    }
                }

                if ($CleanupMode) {
                    if ($Pscmdlet.ShouldProcess("$db on $instance", "Changing SizeBasedCleanupMode to $CleanupMode")) {
                        $db.QueryStoreOptions.SizeBasedCleanupMode = $CleanupMode
                    }
                }

                if ($StaleQueryThreshold) {
                    if ($Pscmdlet.ShouldProcess("$db on $instance", "Changing StaleQueryThresholdInDays to $StaleQueryThreshold")) {
                        $db.QueryStoreOptions.StaleQueryThresholdInDays = $StaleQueryThreshold
                    }
                }

                # Alter the Query Store Configuration
                if ($Pscmdlet.ShouldProcess("$db on $instance", "Altering Query Store configuration on database")) {
                    try {
                        $db.QueryStoreOptions.Alter()
                        $db.Alter()
                        $db.Refresh()
                    } catch {
                        Stop-Function -Message "Could not modify configuration." -Category InvalidOperation -InnerErrorRecord $_ -Target $db -Continue
                    }
                }

                if ($Pscmdlet.ShouldProcess("$db on $instance", "Getting results from Get-DbaDbQueryStoreOption")) {
                    # Display resulting changes
                    Get-DbaDbQueryStoreOption -SqlInstance $server -Database $db.name -Verbose:$false
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Set-DbaDbQueryStoreOptions
    }
}

tools\dbatools\functions\Suspend-DbaAgDbDataMovement.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Suspend-DbaAgDbDataMovement {
    <#
    .SYNOPSIS
        Suspends data movement for an availability group database on a SQL Server instance.

    .DESCRIPTION
        Suspends data movement for an availability group database on a SQL Server instance.

   .PARAMETER SqlInstance
        The target SQL Server instance or instances. Server version must be SQL Server version 2012 or higher.

    .PARAMETER SqlCredential
        Login to the SqlInstance instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The database or databases to suspend movement upon.

    .PARAMETER AvailabilityGroup
        The availability group where the database movement will be suspended.

    .PARAMETER InputObject
        Enables piping from Get-DbaAgDatabase

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: AvailabilityGroup, HA, AG
        Author: Chrissy LeMaire (@cl), netnerds.net
        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Suspend-DbaAgDbDataMovement

    .EXAMPLE
        PS C:\> Suspend-DbaAgDbDataMovement -SqlInstance sql2017a -AvailabilityGroup ag1 -Database db1, db2

        Suspends data movement on db1 and db2 to ag1 on sql2017a. Prompts for confirmation.

    .EXAMPLE
        PS C:\> Get-DbaAgDatabase -SqlInstance sql2017a, sql2019 | Out-GridView -Passthru | Suspend-DbaAgDbDataMovement -Confirm:$false

        Suspends data movement on the selected availability group databases. Does not prompt for confirmation.

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'High')]
    param (
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string]$AvailabilityGroup,
        [string[]]$Database,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.AvailabilityDatabase[]]$InputObject,
        [switch]$EnableException
    )
    process {
        if ((Test-Bound -ParameterName SqlInstance)) {
            if ((Test-Bound -Not -ParameterName Database) -and (Test-Bound -Not -ParameterName AvailabilityGroup)) {
                Stop-Function -Message "You must specify one or more databases and one Availability Groups when using the SqlInstance parameter."
                return
            }
        }

        foreach ($instance in $SqlInstance) {
            $InputObject += Get-DbaAgDatabase -SqlInstance $instance -SqlCredential $SqlCredential -Database $Database
        }

        foreach ($agdb in $InputObject) {
            if ($Pscmdlet.ShouldProcess($ag.Parent.Name, "Seting availability group $db to $($db.Parent.Name)")) {
                try {
                    $null = $agdb.SuspendDataMovement()
                    $agdb
                } catch {
                    Stop-Function -Message "Failure" -ErrorRecord $_ -Continue
                }
            }
        }
    }
}

tools\dbatools\functions\Set-DbaDbOwner.ps1

function Set-DbaDbOwner {
    <#
    .SYNOPSIS
        Sets database owners with a desired login if databases do not match that owner.

    .DESCRIPTION
        This function will alter database ownership to match a specified login if their current owner does not match the target login. By default, the target login will be 'sa', but the function will allow the user to specify a different login for  ownership. The user can also apply this to all databases or only to a select list of databases (passed as either a comma separated list or a string array).

        Best Practice reference: http://weblogs.sqlteam.com/dang/archive/2008/01/13/Database-Owner-Troubles.aspx

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        Specifies the database(s) to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        Specifies the database(s) to exclude from processing. Options for this list are auto-populated from the server.

    .PARAMETER TargetLogin
        Specifies the login that you wish check for ownership. This defaults to 'sa' or the sysadmin name if sa was renamed. This must be a valid security principal which exists on the target server.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Database, Owner, DbOwner
        Author: Michael Fal (@Mike_Fal), http://mikefal.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Set-DbaDbOwner

    .EXAMPLE
        PS C:\> Set-DbaDbOwner -SqlInstance localhost

        Sets database owner to 'sa' on all databases where the owner does not match 'sa'.

    .EXAMPLE
        PS C:\> Set-DbaDbOwner -SqlInstance localhost -TargetLogin DOMAIN\account

        Sets the database owner to DOMAIN\account on all databases where the owner does not match DOMAIN\account.

    .EXAMPLE
        PS C:\> Set-DbaDbOwner -SqlInstance sqlserver -Database db1, db2

        Sets database owner to 'sa' on the db1 and db2 databases if their current owner does not match 'sa'.

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [Alias("Login")]
        [string]$TargetLogin,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure." -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            # dynamic sa name for orgs who have changed their sa name
            if (!$TargetLogin) {
                $TargetLogin = ($server.logins | Where-Object { $_.id -eq 1 }).Name
            }

            #Validate login
            if (($server.Logins.Name) -notcontains $TargetLogin) {
                Stop-Function -Message "$TargetLogin is not a valid login on $instance. Moving on." -Continue -EnableException $EnableException
            }

            #Owner cannot be a group
            $TargetLoginObject = $server.Logins | where-object {$PSItem.Name -eq $TargetLogin }| Select-Object -property  Name, LoginType
            if ($TargetLoginObject.LoginType -eq 'WindowsGroup') {
                Stop-Function -Message "$TargetLogin is a group, therefore can't be set as owner. Moving on." -Continue -EnableException $EnableException
            }

            #Get database list. If value for -Database is passed, massage to make it a string array.
            #Otherwise, use all databases on the instance where owner not equal to -TargetLogin
            #use where owner and target login do not match
            #exclude system dbs
            $dbs = $server.Databases | Where-Object { $_.IsAccessible -and $_.Owner -ne $TargetLogin -and @('master', 'model', 'msdb', 'tempdb', 'distribution') -notcontains $_.Name}

            #filter collection based on -Databases/-Exclude parameters
            if ($Database) {
                $dbs = $dbs | Where-Object { $Database -contains $_.Name }
            }

            if ($ExcludeDatabase) {
                $dbs = $dbs | Where-Object { $ExcludeDatabase -notcontains $_.Name }
            }

            Write-Message -Level Verbose -Message "Updating $($dbs.Count) database(s)."
            foreach ($db in $dbs) {
                $dbname = $db.name
                if ($PSCmdlet.ShouldProcess($instance, "Setting database owner for $dbname to $TargetLogin")) {
                    try {
                        Write-Message -Level Verbose -Message "Setting database owner for $dbname to $TargetLogin on $instance."
                        # Set database owner to $TargetLogin (default 'sa')
                        # Ownership validations checks

                        #Database is online and accessible
                        if ($db.Status -notmatch 'Normal') {
                            Write-Message -Level Warning -Message "$dbname on $instance is in a  $($db.Status) state and can not be altered. It will be skipped."
                        }
                        #Database is updatable, not read-only
                        elseif ($db.IsUpdateable -eq $false) {
                            Write-Message -Level Warning -Message "$dbname on $instance is not in an updateable state and can not be altered. It will be skipped."
                        }
                        #Is the login mapped as a user? Logins already mapped in the database can not be the owner
                        elseif ($db.Users.name -contains $TargetLogin) {
                            Write-Message -Level Warning -Message "$dbname on $instance has $TargetLogin as a mapped user. Mapped users can not be database owners."
                        } else {
                            $db.SetOwner($TargetLogin)
                            [PSCustomObject]@{
                                ComputerName = $server.ComputerName
                                InstanceName = $server.ServiceName
                                SqlInstance  = $server.DomainInstanceName
                                Database     = $db
                                Owner        = $TargetLogin
                            }
                        }
                    } catch {
                        Stop-Function -Message "Failure updating owner." -ErrorRecord $_ -Target $instance -Continue
                    }
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Set-DbaDatabaseOwner
    }
}

tools\dbatools\functions\Sync-DbaLoginPermission.ps1

function Sync-DbaLoginPermission {
    <#
    .SYNOPSIS
        Copies SQL login permissions from one server to another.

    .DESCRIPTION
        Syncs only SQL Server login permissions, roles, etc. Does not add or drop logins. If a matching login does not exist on the destination, the login will be skipped. Credential removal is not currently supported for this operation.

    .PARAMETER Source
        Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.

    .PARAMETER SourceSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Destination
        Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.

    .PARAMETER DestinationSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Login
        The login(s) to process. Options for this list are auto-populated from the server. If unspecified, all logins will be processed.

    .PARAMETER ExcludeLogin
        The login(s) to exclude. Options for this list are auto-populated from the server.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Migration, Login
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Sync-DbaLoginPermission

    .EXAMPLE
        PS C:\> Sync-DbaLoginPermission -Source sqlserver2014a -Destination sqlcluster

        Syncs only SQL Server login permissions, roles, etc. Does not add or drop logins or users. To copy logins and their permissions, use Copy-SqlLogin.

    .EXAMPLE
        PS C:\> Sync-DbaLoginPermission -Source sqlserver2014a -Destination sqlcluster -Exclude realcajun -SourceSqlCredential $scred -DestinationSqlCredential $dcred

        Copies all login permissions except for realcajun using SQL Authentication to connect to each server. If a login already exists on the destination, the permissions will not be migrated.

    .EXAMPLE
        PS C:\> Sync-DbaLoginPermission -Source sqlserver2014a -Destination sqlcluster -Login realcajun, netnerds

        Copies permissions ONLY for logins netnerds and realcajun.

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [DbaInstanceParameter]$Source,
        [PSCredential]$SourceSqlCredential,
        [parameter(Mandatory)]
        [DbaInstanceParameter[]]$Destination,
        [PSCredential]$DestinationSqlCredential,
        [string[]]$Login,
        [string[]]$ExcludeLogin,
        [switch]$EnableException
    )
    begin {
        function Sync-Only {
            [CmdletBinding()]
            param (
                [Parameter(Mandatory)]
                [ValidateNotNullOrEmpty()]
                [object]$sourceServer,
                [object]$destServer,
                [array]$Logins,
                [array]$Exclude
            )

            try {
                $sa = Get-SqlSaLogin -SqlInstance $destServer -ErrorAction Stop
            } catch {
                $sa = "sa"
            }

            foreach ($sourceLogin in $sourceServer.Logins) {

                $username = $sourceLogin.Name
                $currentLogin = $sourceServer.ConnectionContext.TrueLogin

                if (!$Login -and $currentLogin -eq $username) {
                    Write-Message -Level Verbose -Message "Sync does not modify the permissions of the current user. Skipping."
                    continue
                }

                if ($null -ne $Logins -and $Logins -notcontains $username) {
                    continue
                }

                if ($Exclude -contains $username -or $username.StartsWith("##") -or $username -eq $sa) {
                    continue
                }

                $serverName = Resolve-NetBiosName $sourceServer
                $userBase = ($username.Split("\")[0]).ToLower()

                if ($serverName -eq $userBase -or $username.StartsWith("NT ")) {
                    continue
                }

                if ($null -eq ($destLogin = $destServer.Logins.Item($username))) {
                    continue
                }

                Update-SqlPermission -SourceServer $sourceServer -SourceLogin $sourceLogin -DestServer $destServer -DestLogin $destLogin
            }
        }

        try {
            $sourceServer = Connect-SqlInstance -SqlInstance $Source -SqlCredential $sqlcredential
            if ((Test-Bound -ParameterName Login)) {
                $Login = ($sourceServer.Logins | Where-Object Name -NotIn $ExcludeLogin).Name
            }
        } catch {
            Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $Source -Continue
            return
        }
    }
    process {
        if (Test-FunctionInterrupt) { return }

        foreach ($dest in $Destination) {
            try {
                $destServer = Connect-SqlInstance -SqlInstance $dest -SqlCredential $DestinationSqlCredential -MinimumVersion 8
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $dest -Continue
            }

            if ($PSCmdlet.ShouldProcess("Syncing Logins $Login")) {
                Sync-Only -SourceServer $sourceServer -DestServer $destServer -Logins $Login -Exclude $ExcludeLogin
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Sync-SqlLoginPermissions
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Sync-DbaSqlLoginPermission
    }
}

tools\dbatools\functions\Test-DbaBackupInformation.ps1

function Test-DbaBackupInformation {
    <#
    .SYNOPSIS
        Tests a dbatools backup history object is correct for restoring

    .DESCRIPTION
        Input is normally from a backup history object generated from `Format-DbaBackupInformation`. This is then parse to check that it's valid for restore. Tests performed include:
          - Checking unbroken LSN chain
          - If the target database exists and WithReplace has been provided
          - If any files already exist, but owned by other databases
          - Creates any new folders required
          - That the backup files exists at the location specified, and can be seen by the Sql Instance
          - If no errors are found then the objects for that database will me marked as Verified

    .PARAMETER BackupHistory
        dbatools BackupHistory object. Normally this will have been process with `Select-` and then `Format-DbaBackupInformation`

    .PARAMETER SqlInstance
        The Sql Server instance that wil be performing the restore

    .PARAMETER SqlCredential
        A Sql Credential to connect to $SqlInstance

    .PARAMETER WithReplace
        By default we won't overwrite an existing database, this switch tells us you want to

    .PARAMETER Continue
        Switch to indicate a continuing restore

    .PARAMETER OutputScriptOnly
        Switch to disable path creation. Will write a warning that a path does not exist

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER VerifyOnly
        This switch indicates that you only wish to verify a restore, so runs a smaller number of tests as you won't be writing anything to the restore server

    .PARAMETER WhatIf
        Shows what would happen if the cmdlet runs. The cmdlet is not run.

    .PARAMETER Confirm
        Prompts you for confirmation before running the cmdlet.

    .NOTES
        Tags: Backup, Restore, DisasterRecovery
        Author: Stuart Moore (@napalmgram), stuart-moore.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Test-DbaBackupInformation

    .EXAMPLE
        PS C:\> $BackupHistory | Test-DbaBackupInformation -SqlInstance MyInstance
        PS C:\> $PassedDbs = $BackupHistory | Where-Object {$_.IsVerified -eq $True}
        PS C:\> $FailedDbs = $BackupHistory | Where-Object {$_.IsVerified -ne $True}

        Pass in a BackupHistory object to be tested against MyInstance.
        Those records that pass are marked as verified. We can then use the IsVerified property to divide the failures and successes

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "Low")]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseOutputTypeCorrectly", "", Justification = "PSSA Rule Ignored by BOH")]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [object[]]$BackupHistory,
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter]$SqlInstance,
        [PSCredential]$SqlCredential,
        [switch]$WithReplace,
        [switch]$Continue,
        [switch]$VerifyOnly,
        [switch]$OutputScriptOnly,
        [switch]$EnableException
    )

    begin {
        try {
            $RestoreInstance = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential
        } catch {
            Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            return
        }
        $InternalHistory = @()
    }
    process {
        foreach ($bh in $BackupHistory) {
            $InternalHistory += $bh
        }
    }
    end {
        $RegisteredFileCheck = Get-DbaDbPhysicalFile -SqlInstance $RestoreInstance

        $Databases = $InternalHistory.Database | Select-Object -Unique
        foreach ($Database in $Databases) {
            $VerificationErrors = 0
            Write-Message -Message "Testing restore for $Database" -Level Verbose
            #Test we're only restoring backups from one database, or hilarity will ensure
            $DbHistory = $InternalHistory | Where-Object {$_.Database -eq $Database}
            if (( $DbHistory | Select-Object -Property OriginalDatabase -Unique ).Count -gt 1) {
                Write-Message -Message "Trying to restore $Database from multiple sources databases" -Level Warning
                $VerificationErrors++
            }
            #Test Db Existance on destination
            $DbCheck = Get-DbaDatabase -SqlInstance $RestoreInstance -Database $Database
            # Only do file and db tests if we're not verifing
            Write-Message -Level Verbose -Message "VerifyOnly = $VerifyOnly"
            If ($VerifyOnly -ne $true) {
                if ($null -ne $DbCheck -and ($WithReplace -ne $true -and $Continue -ne $true)) {
                    Stop-Function -Message "Database $Database exists, so WithReplace must be specified" -Target $database
                    $VerificationErrors++
                }

                $DBFileCheck = ($RegisteredFileCheck | Where-Object Name -eq $Database).PhysicalName
                $OtherFileCheck = ($RegisteredFileCheck | Where-Object Name -ne $Database).PhysicalName
                $DBHistoryPhysicalPaths = ($DbHistory | Select-Object -ExpandProperty filelist | Select-Object PhysicalName -Unique).PhysicalName
                $DBHistoryPhysicalPathsTest = Test-DbaPath -SqlInstance $RestoreInstance -Path $DBHistoryPhysicalPaths
                $DBHistoryPhysicalPathsExists = ($DBHistoryPhysicalPathsTest | Where-Object FileExists -eq $True).FilePath
                $pathSep = Get-DbaPathSep -Server $RestoreInstance
                foreach ($path in $DBHistoryPhysicalPaths) {
                    if (($DBHistoryPhysicalPathsTest | Where-Object FilePath -eq $path).FileExists) {
                        if ($path -in $DBFileCheck) {
                            #If the Files are owned by the db we're restoring check for Continue or WithReplace. If not, then report error otherwise just carry on
                            if ($WithReplace -ne $True -and $Continue -ne $True) {
                                Write-Message -Message "File $path already exists on $SqlInstance and WithReplace not specified, cannot restore" -Level Warning
                                $VerificationErrors++
                            }
                        } elseif ($path -in $OtherFileCheck) {
                            Write-Message -Message "File $path already exists on $SqlInstance and owned by another database, cannot restore" -Level Warning
                            $VerificationErrors++
                        } elseif ($path -in $DBHistoryPhysicalPathsExists -and $RestoreInstance.VersionMajor -gt 8) {
                            Write-Message -Message "File $path already exists on $($SqlInstance.ComputerName), not owned by any database in $SqlInstance, will not overwrite." -Level Warning
                            $VerificationErrors++
                        }
                    } else {
                        <#
                        dang, Split-Path converts path separators always using the "current system" settings
                        PS C:> Split-Path -Path '/var/opt/mssql/data/foo.bak' -Parent
                        \var\opt\mssql\data
                        I'm not aware of a safe way to change this so...we do a little hack.
                        #>
                        $pathSep = Get-DbaPathSep -Server $RestoreInstance
                        $ParentPath = Split-Path $path -Parent
                        $ParentPath = $ParentPath.Replace('\', $pathSep)
                        if (!(Test-DbaPath -SqlInstance $RestoreInstance -Path $ParentPath) ) {
                            if (-not $OutputScriptOnly) {
                                $ConfirmMessage = "`n Creating Folder $ParentPath on $SqlInstance `n"
                                if ($Pscmdlet.ShouldProcess("$Path on $SqlInstance `n `n", $ConfirmMessage)) {
                                    if (New-DbaDirectory -SqlInstance $RestoreInstance -Path $ParentPath) {
                                        Write-Message -Message "Created Folder $ParentPath on $SqlInstance" -Level Verbose
                                    } else {
                                        Write-Message -Message "Failed to create $ParentPath on $SqlInstance" -Level Warning
                                        $VerificationErrors++
                                    }
                                }
                            } else {
                                Write-Message -Message "Parth $ParentPath on $SqlInstance does not exist" -Level Verbose
                            }
                        }
                    }
                }
            }

            #Test all backups readable
            $allpaths = $DbHistory | Select-Object -ExpandProperty FullName
            $allpaths_validity = Test-DbaPath -SqlInstance $RestoreInstance -Path $allpaths
            foreach ($path in $allpaths_validity) {
                if ($path.FileExists -eq $false -and ($path.FilePath -notlike 'http*')) {
                    Write-Message -Message "Backup File $($path.FilePath) cannot be read by $($RestoreInstance.Name). Does the service account ($($RestoreInstance.ServiceAccount)) have permission?" -Level Warning
                    $VerificationErrors++
                }
            }
            #Test for LSN chain
            if ($true -ne $Continue) {
                if (!($DbHistory | Test-DbaLsnChain)) {
                    Write-Message -Message "LSN Check failed" -Level Verbose
                    $VerificationErrors++
                }
            }
            if ($VerificationErrors -eq 0) {
                Write-Message -Message "Marking $Database as verified" -Level Verbose
                $InternalHistory | Where-Object {$_.Database -eq $Database} | Foreach-Object {$_.IsVerified = $True}
            } else {
                Write-Message -Message "Verification errors  = $VerificationErrors - Has not Passed" -Level Verbose
            }
        }
        $InternalHistory
    }
}

tools\dbatools\functions\Test-DbaBuild.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Test-DbaBuild {
    <#
    .SYNOPSIS
        Returns SQL Server Build "compliance" level on a build.

    .DESCRIPTION
        Returns info about the specific build of a SQL instance, including the SP, the CU and the reference KB, End Of Support, wherever possible. It adds a Compliance property as true/false, and adds details about the "targeted compliance".

    .PARAMETER Build
        Instead of connecting to a real instance, pass a string identifying the build to get the info back.

    .PARAMETER MinimumBuild
        This is the build version to test "compliance" against. Anything below this is flagged as not compliant.

    .PARAMETER MaxBehind
        Instead of using a specific MinimumBuild here you can pass "how many service packs and cu back" is the targeted compliance level. You can use xxSP or xxCU or both, where xx is a number. See the Examples for more information.

    .PARAMETER Latest
        Shortcut for specifying the very most up-to-date build available.

    .PARAMETER SqlInstance
        Target any number of instances, in order to return their compliance state.

    .PARAMETER SqlCredential
        When connecting to an instance, use the credentials specified.

    .PARAMETER Update
        Looks online for the most up to date reference, replacing the local one.

    .PARAMETER Quiet
        Makes the function just return $true/$false. It's useful if you use Test-DbaBuild in your own scripts.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: SqlBuild, Version
        Author: Simone Bizzotto (@niphold) | Friedrich Weinmann (@FredWeinmann)

        dbatools PowerShell module (https://dbatools.io, [email protected])
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Test-DbaBuild

    .EXAMPLE
        PS C:\> Test-DbaBuild -Build "12.0.5540" -MinimumBuild "12.0.5557"

        Returns information about a build identified by "12.0.5540" (which is SQL 2014 with SP2 and CU4), which is not compliant as the minimum required
        build is "12.0.5557" (which is SQL 2014 with SP2 and CU8).

    .EXAMPLE
        PS C:\> Test-DbaBuild -Build "12.0.5540" -MaxBehind "1SP"

        Returns information about a build identified by "12.0.5540", making sure it is AT MOST 1 Service Pack "behind". For that version,
        that identifies an SP2, means accepting as the lowest compliance version as "12.0.4110", that identifies 2014 with SP1.

        Output column CUTarget is not relevant (empty). SPTarget and BuildTarget are filled in the result.

    .EXAMPLE
        PS C:\> Test-DbaBuild -Build "12.0.5540" -MaxBehind "1SP 1CU"

        Returns information about a build identified by "12.0.5540", making sure it is AT MOST 1 Service Pack "behind", plus 1 CU "behind". For that version,
        that identifies an SP2 and CU, rolling back 1 SP brings you to "12.0.4110", but given the latest CU for SP1 is CU13, the target "compliant" build
        will be "12.0.4511", which is 2014 with SP1 and CU12.

    .EXAMPLE
        PS C:\> Test-DbaBuild -Build "12.0.5540" -MaxBehind "0CU"

        Returns information about a build identified by "12.0.5540", making sure it is the latest CU release.

        Output columns CUTarget, SPTarget and BuildTarget are relevant. If the latest build is a service pack (not a CU), CUTarget will be empty.

    .EXAMPLE
        PS C:\> Test-DbaBuild -Build "12.0.5540" -Latest

        Returns information about a build identified by "12.0.5540", making sure it is the latest build available.

        Output columns CUTarget and SPTarget are not relevant (empty), only the BuildTarget is.

    .EXAMPLE
        PS C:\> Test-DbaBuild -Build "12.00.4502" -MinimumBuild "12.0.4511" -Update

        Same as before, but tries to fetch the most up to date index online. When the online version is newer, the local one gets overwritten.

    .EXAMPLE
        PS C:\> Test-DbaBuild -Build "12.0.4502","10.50.4260" -MinimumBuild "12.0.4511"

        Returns information builds identified by these versions strings.

    .EXAMPLE
        PS C:\> Get-DbaCmsRegServer -SqlInstance sqlserver2014a | Test-DbaBuild -MinimumBuild "12.0.4511"

        Integrate with other cmdlets to have builds checked for all your registered servers on sqlserver2014a.

    #>
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseShouldProcessForStateChangingFunctions", "")]
    [CmdletBinding()]
    param (
        [version[]]$Build,
        [version]$MinimumBuild,
        [string]$MaxBehind,
        [switch] $Latest,
        [parameter(ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [switch]$Update,
        [switch]$Quiet,
        [switch][Alias('Silent')]$EnableException
    )

    begin {
        #region Helper functions
        function Get-DbaBuildReferenceIndex {
            [CmdletBinding()]

            $DbatoolsData = Get-DbatoolsConfigValue -Name 'Path.DbatoolsData'
            $writable_idxfile = Join-Path $DbatoolsData "dbatools-buildref-index.json"
            $result = Get-Content $writable_idxfile -Raw | ConvertFrom-Json
            $result.Data | Select-Object @{ Name = "VersionObject"; Expression = { [version]$_.Version } }, *
        }

        $ComplianceSpec = @()
        $ComplianceSpecExclusiveParams = @('MinimumBuild', 'MaxBehind', 'Latest')
        foreach ($exclParam in $ComplianceSpecExclusiveParams) {
            if (Test-Bound -Parameter $exclParam) { $ComplianceSpec += $exclParam }
        }
        if ($ComplianceSpec.Length -gt 1) {
            Stop-Function -Category InvalidArgument -Message "-MinimumBuild, -MaxBehind and -Latest are mutually exclusive. Please choose only one. Quitting."
            return
        }
        if ($ComplianceSpec.Length -eq 0) {
            Stop-Function -Category InvalidArgument -Message "You need to choose one from -MinimumBuild, -MaxBehind and -Latest. Quitting."
            return
        }
        if ($MaxBehind) {
            $MaxBehindValidator = [regex]'^(?<howmany>[\d]+)(?<what>SP|CU)$'
            $pieces = $MaxBehind.Split(' ')	| Where-Object { $_ }
            try {
                $ParsedMaxBehind = @{}
                foreach ($piece in $pieces) {
                    $pieceMatch = $MaxBehindValidator.Match($piece)
                    if ($pieceMatch.Success -ne $true) {
                        Stop-Function -Message "MaxBehind has an invalid syntax ('$piece' could not be parsed correctly)" -ErrorRecord $_
                        return
                    } else {
                        $howmany = [int]$pieceMatch.Groups['howmany'].Value
                        $what = $pieceMatch.Groups['what'].Value
                        if ($ParsedMaxBehind.ContainsKey($what)) {
                            Stop-Function -Message "The specifier $what has been already passed" -ErrorRecord $_
                            return
                        } else {
                            $ParsedMaxBehind[$what] = $howmany
                        }
                    }
                }
                if (-not $ParsedMaxBehind.ContainsKey('SP')) {
                    $ParsedMaxBehind['SP'] = 0
                }
            } catch {
                Stop-Function -Message "Error parsing MaxBehind" -ErrorRecord $_
                return
            }
        }
    }
    process {
        if (Test-FunctionInterrupt) { return }
        $hiddenProps = @()
        if (-not $SqlInstance) {
            $hiddenProps += 'SqlInstance'
        }
        if ($MinimumBuild) {
            $hiddenProps += 'MaxBehind', 'SPTarget', 'CUTarget', 'BuildTarget'
        } elseif ($MaxBehind -or $Latest) {
            $hiddenProps += 'MinimumBuild'
        }
        if ($Build) {
            $BuildVersions = Get-DbaBuildReference -Build $Build -Update:$Update -EnableException:$EnableException
        } elseif ($SqlInstance) {
            $BuildVersions = Get-DbaBuildReference -SqlInstance $SqlInstance -SqlCredential $SqlCredential -Update:$Update -EnableException:$EnableException
        }
        # Moving it down here to only trigger after -Update was properly called
        if (!$IdxRef) {
            try {
                $IdxRef = Get-DbaBuildReferenceIndex
            } catch {
                Stop-Function -Message "Error loading SQL build reference" -ErrorRecord $_
                return
            }
        }
        foreach ($BuildVersion in $BuildVersions) {
            $inputbuild = $BuildVersion.Build
            $compliant = $false
            $targetSPName = $null
            $targetCUName = $null
            if ($BuildVersion.MatchType -eq 'Approximate') {
                Write-Message -Level Warning -Message "$($BuildVersion.Build) is not recognized as a correct version"
            }
            if ($MinimumBuild) {
                Write-Message -Level Debug -Message "Comparing $MinimumBuild to $inputbuild"
                if ($inputbuild -ge $MinimumBuild) {
                    $compliant = $true
                }
            } elseif ($MaxBehind -or $Latest) {
                $IdxVersion = $IdxRef | Where-Object Version -like "$($inputbuild.Major).$($inputbuild.Minor).*"
                $lastsp = ''
                $SPsAndCUs = @()
                foreach ($el in $IdxVersion) {
                    if ($null -ne $el.SP) {
                        $lastsp = $el.SP | Where-Object { $_ -ne 'LATEST' }
                        $SPsAndCUs += @{
                            VersionObject = $el.VersionObject
                            SP            = $lastsp
                        }
                    }
                    if ($null -ne $el.CU) {
                        $SPsAndCUs += @{
                            VersionObject = $el.VersionObject
                            SP            = $lastsp
                            CU            = $el.CU
                        }
                    }
                }
                $targetedBuild = $SPsAndCUs[0]
                if ($Latest) {
                    $targetedBuild = $IdxVersion[$IdxVersion.Length - 1]
                } else {
                    if ($ParsedMaxBehind.ContainsKey('SP')) {
                        [string[]]$AllSPs = $SPsAndCUs.SP | Select-Object -Unique
                        $targetSP = $AllSPs.Length - $ParsedMaxBehind['SP'] - 1
                        if ($targetSP -lt 0) {
                            $targetSP = 0
                        }
                        $targetSPName = $AllSPs[$targetSP]
                        Write-Message -Level Debug -Message "Target SP is $targetSPName - $targetSP on $($AllSPs.Length)"
                        $targetedBuild = $SPsAndCUs | Where-Object SP -eq $targetSPName | Select-Object -First 1
                    }
                    if ($ParsedMaxBehind.ContainsKey('CU')) {
                        $AllCUs = ($SPsAndCUs | Where-Object VersionObject -gt $targetedBuild.VersionObject).CU | Select-Object -Unique
                        if ($AllCUs.Length -gt 0) {
                            #CU after the targeted build available
                            $targetCU = $AllCUs.Length - $ParsedMaxBehind['CU'] - 1
                            if ($targetCU -lt 0) {
                                $targetCU = 0
                            }
                            $targetCUName = $AllCUs[$targetCU]
                            Write-Message -Level Debug -Message "Target CU is $targetCUName - $targetCU on $($AllCUs.Length)"
                            $targetedBuild = $SPsAndCUs | Where-Object VersionObject -gt $targetedBuild.VersionObject | Where-Object CU -eq $targetCUName | Select-Object -First 1
                        }
                    }
                }
                if ($inputbuild -ge $targetedBuild.VersionObject) {
                    $compliant = $true
                }
            }
            Add-Member -InputObject $BuildVersion -MemberType NoteProperty -Name Compliant -Value $compliant
            Add-Member -InputObject $BuildVersion -MemberType NoteProperty -Name MinimumBuild -Value $MinimumBuild
            Add-Member -InputObject $BuildVersion -MemberType NoteProperty -Name MaxBehind -Value $MaxBehind
            Add-Member -InputObject $BuildVersion -MemberType NoteProperty -Name SPTarget -Value $targetSPName
            Add-Member -InputObject $BuildVersion -MemberType NoteProperty -Name CUTarget -Value $targetCUName
            Add-Member -InputObject $BuildVersion -MemberType NoteProperty -Name BuildTarget -Value $targetedBuild.VersionObject
            if ($Quiet) {
                $BuildVersion.Compliant
            } else {
                $BuildVersion | Select-Object * | Select-DefaultView -ExcludeProperty $hiddenProps
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Test-DbaSqlBuild
    }
}

tools\dbatools\functions\Test-DbaCmConnection.ps1

function Test-DbaCmConnection {
    <#
    .SYNOPSIS
        Tests over which paths a computer can be managed.

    .DESCRIPTION
        Tests over which paths a computer can be managed.

        This function tries out the connectivity for:
        - Cim over WinRM
        - Cim over DCOM
        - Wmi
        - PowerShellRemoting
        Results will be written to the connectivity cache and will cause Get-DbaCmObject and Invoke-DbaCmMethod to connect using the way most likely to succeed. This way, it is likely the other commands will take less time to execute. These others too cache their results, in order to dynamically update connection statistics.

        This function ignores global configuration settings limiting which protocols may be used.

    .PARAMETER ComputerName
        The computer to test against.

    .PARAMETER Credential
        The credentials to use when running the test. Bad credentials are automatically cached as non-working. This behavior can be disabled by the 'Cache.Management.Disable.BadCredentialList' configuration.

    .PARAMETER Type
        The connection protocol types to test.
        By default, all types are tested.

        Note that this function will ignore global configurations limiting the types of connections available and test all connections specified here instead.

        Available connection protocol types: "CimRM", "CimDCOM", "Wmi", "PowerShellRemoting"

    .PARAMETER Force
        If this switch is enabled, the Alert will be dropped and recreated on Destination.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: ComputerManagement, CIM
        Author: Friedrich Weinmann (@FredWeinmann)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        **This function should not be called from within dbatools. It is meant as a tool for users only.**

    .LINK
        https://dbatools.io/Test-DbaCmConnection

    .EXAMPLE
        PS C:\> Test-DbaCmConnection -ComputerName sql2014

        Performs a full-spectrum connection test against the computer sql2014. The results will be reported and registered. Future calls from Get-DbaCmObject will recognize the results and optimize the query.

    .EXAMPLE
        PS C:\> Test-DbaCmConnection -ComputerName sql2014 -Credential $null -Type CimDCOM, CimRM

        This test will run a connectivity test of CIM over DCOM and CIM over WinRM against the computer sql2014 using Windows Authentication.

        The results will be reported and registered. Future calls from Get-DbaCmObject will recognize the results and optimize the query.

    #>
    [CmdletBinding()]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSAvoidUsingWMICmdlet", "", Justification = "Using Get-WmiObject is used as a fallback for testing connections")]
    param (
        [Parameter(ValueFromPipeline)]
        [Sqlcollaborative.Dbatools.Parameter.DbaCmConnectionParameter[]]
        $ComputerName = $env:COMPUTERNAME,

        [System.Management.Automation.PSCredential]
        $Credential,

        [Sqlcollaborative.Dbatools.Connection.ManagementConnectionType[]]
        $Type = @("CimRM", "CimDCOM", "Wmi", "PowerShellRemoting"),

        [switch]
        $Force,

        [switch]
        [Alias('Silent')]$EnableException
    )

    begin {
        #region Configuration Values
        $disable_cache = Get-DbatoolsConfigValue -Name "ComputerManagement.Cache.Disable.All" -Fallback $false
        #Variable marked as unused by PSScriptAnalyzer
        #$disable_badcredentialcache = Get-DbatoolsConfigValue -Name "ComputerManagement.Cache.Disable.BadCredentialList" -Fallback $false
        #endregion Configuration Values

        #region Helper Functions
        function Test-ConnectionCimRM {
            [CmdletBinding()]
            param (
                [Sqlcollaborative.Dbatools.Parameter.DbaCmConnectionParameter]
                $ComputerName,

                [System.Management.Automation.PSCredential]
                $Credential
            )

            try {
                #Variable $os marked as unused by PSScriptAnalyzer replace with $null to catch output
                $null = $ComputerName.Connection.GetCimRMInstance($Credential, "Win32_OperatingSystem", "root\cimv2")

                New-Object PSObject -Property @{
                    Success       = "Success"
                    Timestamp     = Get-Date
                    Authenticated = $true
                }
            } catch {
                if (($_.Exception.InnerException -eq 0x8007052e) -or ($_.Exception.InnerException -eq 0x80070005)) {
                    New-Object PSObject -Property @{
                        Success       = "Error"
                        Timestamp     = Get-Date
                        Authenticated = $false
                    }
                } else {
                    New-Object PSObject -Property @{
                        Success       = "Error"
                        Timestamp     = Get-Date
                        Authenticated = $true
                    }
                }
            }
        }

        function Test-ConnectionCimDCOM {
            [CmdletBinding()]
            param (
                [Sqlcollaborative.Dbatools.Parameter.DbaCmConnectionParameter]
                $ComputerName,

                [System.Management.Automation.PSCredential]
                $Credential
            )

            try {
                #Variable $os marked as unused by PSScriptAnalyzer replace with $null to catch output
                $null = $ComputerName.Connection.GetCimDComInstance($Credential, "Win32_OperatingSystem", "root\cimv2")

                New-Object PSObject -Property @{
                    Success       = "Success"
                    Timestamp     = Get-Date
                    Authenticated = $true
                }
            } catch {
                if (($_.Exception.InnerException -eq 0x8007052e) -or ($_.Exception.InnerException -eq 0x80070005)) {
                    New-Object PSObject -Property @{
                        Success       = "Error"
                        Timestamp     = Get-Date
                        Authenticated = $false
                    }
                } else {
                    New-Object PSObject -Property @{
                        Success       = "Error"
                        Timestamp     = Get-Date
                        Authenticated = $true
                    }
                }
            }
        }

        function Test-ConnectionWmi {
            [CmdletBinding()]
            param (
                [string]
                $ComputerName,

                [System.Management.Automation.PSCredential]
                $Credential
            )

            try {
                #Variable $os marked as unused by PSScriptAnalyzer replace with $null to catch output
                $null = Get-WmiObject -ComputerName $ComputerName -Credential $Credential -Class Win32_OperatingSystem -ErrorAction Stop
                New-Object PSObject -Property @{
                    Success       = "Success"
                    Timestamp     = Get-Date
                    Authenticated = $true
                }
            } catch [System.UnauthorizedAccessException] {
                New-Object PSObject -Property @{
                    Success       = "Error"
                    Timestamp     = Get-Date
                    Authenticated = $false
                }
            } catch {
                New-Object PSObject -Property @{
                    Success       = "Error"
                    Timestamp     = Get-Date
                    Authenticated = $true
                }
            }
        }

        function Test-ConnectionPowerShellRemoting {
            [CmdletBinding()]
            param (
                [string]
                $ComputerName,

                [System.Management.Automation.PSCredential]
                $Credential
            )

            try {
                $parameters = @{
                    ScriptBlock  = { Get-WmiObject -Class Win32_OperatingSystem -ErrorAction Stop }
                    ComputerName = $ComputerName
                    ErrorAction  = 'Stop'
                }
                if ($Credential) { $parameters["Credential"] = $Credential }
                #Variable $os marked as unused by PSScriptAnalyzer replace with $null to catch output
                $null = Invoke-Command @parameters

                New-Object PSObject -Property @{
                    Success       = "Success"
                    Timestamp     = Get-Date
                    Authenticated = $true
                }
            } catch {
                # Will always consider authenticated, since any call with credentials to a server that doesn't exist will also carry invalid credentials error.
                # There simply is no way to differentiate between actual authentication errors and server not reached
                New-Object PSObject -Property @{
                    Success       = "Error"
                    Timestamp     = Get-Date
                    Authenticated = $true
                }
            }
        }
        #endregion Helper Functions
    }
    process {
        foreach ($ConnectionObject in $ComputerName) {
            if (-not $ConnectionObject.Success) { Stop-Function -Message "Failed to interpret input: $($ConnectionObject.Input)" -Category InvalidArgument -Target $ConnectionObject.Input -Continue}

            $Computer = $ConnectionObject.Connection.ComputerName.ToLower()
            Write-Message -Level VeryVerbose -Message "[$Computer] Testing management connection"

            #region Setup connection object
            $con = $ConnectionObject.Connection
            #endregion Setup connection object

            #region Handle credentials
            #Variable marked as unused by PSScriptAnalyzer
            #$BadCredentialsFound = $false
            if ($con.DisableBadCredentialCache) { $con.KnownBadCredentials.Clear() }
            elseif ($con.IsBadCredential($Credential) -and (-not $Force)) {
                Stop-Function -Message "[$Computer] The credentials supplied are on the list of known bad credentials, skipping. Use -Force to override this." -Continue -Category InvalidArgument -Target $Computer
            } elseif ($con.IsBadCredential($Credential) -and $Force) {
                $con.RemoveBadCredential($Credential)
            }
            #endregion Handle credentials

            #region Connectivity Tests
            :types foreach ($ConnectionType in $Type) {
                switch ($ConnectionType) {
                    #region CimRM
                    "CimRM" {
                        Write-Message -Level Verbose -Message "[$Computer] Testing management access using CIM over WinRM"
                        $res = Test-ConnectionCimRM -ComputerName $con -Credential $Credential
                        $con.LastCimRM = $res.Timestamp
                        $con.CimRM = $res.Success
                        Write-Message -Level VeryVerbose -Message "[$Computer] CIM over WinRM Results | Success: $($res.Success), Authentication: $($res.Authenticated)"

                        if (-not $res.Authenticated) {
                            Write-Message -Level Important -Message "[$Computer] The credentials supplied proved to be invalid. Skipping further tests"
                            $con.AddBadCredential($Credential)
                            break types
                        }
                    }
                    #endregion CimRM

                    #region CimDCOM
                    "CimDCOM" {
                        Write-Message -Level Verbose -Message "[$Computer] Testing management access using CIM over DCOM."
                        $res = Test-ConnectionCimDCOM -ComputerName $con -Credential $Credential
                        $con.LastCimDCOM = $res.Timestamp
                        $con.CimDCOM = $res.Success
                        Write-Message -Level VeryVerbose -Message "[$Computer] CIM over DCOM Results | Success: $($res.Success), Authentication: $($res.Authenticated)"

                        if (-not $res.Authenticated) {
                            Write-Message -Level Important -Message "[$Computer] The credentials supplied proved to be invalid. Skipping further tests."
                            $con.AddBadCredential($Credential)
                            break types
                        }
                    }
                    #endregion CimDCOM

                    #region Wmi
                    "Wmi" {
                        Write-Message -Level Verbose -Message "[$Computer] Testing management access using WMI."
                        $res = Test-ConnectionWmi -ComputerName $Computer -Credential $Credential
                        $con.LastWmi = $res.Timestamp
                        $con.Wmi = $res.Success
                        Write-Message -Level VeryVerbose -Message "[$Computer] WMI Results | Success: $($res.Success), Authentication: $($res.Authenticated)"

                        if (-not $res.Authenticated) {
                            Write-Message -Level Important -Message "[$Computer] The credentials supplied proved to be invalid. Skipping further tests"
                            $con.AddBadCredential($Credential)
                            break types
                        }
                    }
                    #endregion Wmi

                    #region PowerShell Remoting
                    "PowerShellRemoting" {
                        Write-Message -Level Verbose -Message "[$Computer] Testing management access using PowerShell Remoting."
                        $res = Test-ConnectionPowerShellRemoting -ComputerName $Computer -Credential $Credential
                        $con.LastPowerShellRemoting = $res.Timestamp
                        $con.PowerShellRemoting = $res.Success
                        Write-Message -Level VeryVerbose -Message "[$Computer] PowerShell Remoting Results | Success: $($res.Success)"
                    }
                    #endregion PowerShell Remoting
                }
            }
            #endregion Connectivity Tests

            if (-not $disable_cache) { [Sqlcollaborative.Dbatools.Connection.ConnectionHost]::Connections[$Computer] = $con }
            $con
        }
    }
    end {

    }
}

tools\dbatools\functions\Test-DbaConnection.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#

function Test-DbaConnection {
    <#
    .SYNOPSIS
        Tests the connection to a single instance.

    .DESCRIPTION
        Tests the ability to connect to an SQL Server instance outputting information about the server and instance.

    .PARAMETER SqlInstance
        The SQL Server Instance to test connection

    .PARAMETER Credential
        Credential object used to connect to the Computer as a different user

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: CIM, Test, Connection
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Test-DbaConnection

    .EXAMPLE
        PS C:\> Test-DbaConnection SQL2016
        ```
        ComputerName         : SQL2016
        InstanceName         : MSSQLSERVER
        SqlInstance          : sql2016
        SqlVersion           : 13.0.4001
        ConnectingAsUser     : BASE\ctrlb
        ConnectSuccess       : True
        AuthType             : Windows Authentication
        AuthScheme           : KERBEROS
        TcpPort              : 1433
        IPAddress            : 10.2.1.5
        NetBiosName          : sql2016.base.local
        IsPingable           : True
        PSRemotingAccessible : True
        DomainName           : base.local
        LocalWindows         : 10.0.15063.0
        LocalPowerShell      : 5.1.15063.502
        LocalCLR             : 4.0.30319.42000
        LocalSMOVersion      : 13.0.0.0
        LocalDomainUser      : True
        LocalRunAsAdmin      : False
        ```

        Test connection to SQL2016 and outputs information collected
    #>
    [CmdletBinding()]
    param (
        [parameter(ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstance[]]$SqlInstance,
        [PSCredential]$Credential,
        [PSCredential]$SqlCredential,
        [Alias('Silent')]
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            # Get local environment
            Write-Message -Level Verbose -Message "Getting local environment information"
            $localInfo = [pscustomobject]@{
                Windows    = [environment]::OSVersion.Version.ToString()
                PowerShell = $PSVersionTable.PSversion.ToString()
                CLR        = $PSVersionTable.CLRVersion.ToString()
                SMO        = ((([AppDomain]::CurrentDomain.GetAssemblies() | Where-Object { $_.Fullname -like "Microsoft.SqlServer.SMO,*" }).FullName -Split ", ")[1]).TrimStart("Version=")
                DomainUser = $env:computername -ne $env:USERDOMAIN
                RunAsAdmin = ([Security.Principal.WindowsPrincipal][Security.Principal.WindowsIdentity]::GetCurrent()).IsInRole([Security.Principal.WindowsBuiltInRole] "Administrator")
            }

            try {
                <# gather following properties #>
                <#
                        InputName        :
                        ComputerName     :
                        IPAddress        :
                        DNSHostName      :
                        DNSDomain        :
                        Domain           :
                        DNSHostEntry     :
                        FQDN             :
                        FullComputerName :
                     #>
                $resolved = Resolve-DbaNetworkName -ComputerName $instance.ComputerName -Credential $Credential
            } catch {
                Stop-Function -Message "Unable to resolve server information" -Category ConnectionError -Target $instance -ErrorRecord $_ -Continue
            }

            # Test for WinRM #Test-WinRM neh
            Write-Message -Level Verbose -Message "Checking remote acccess"
            try {
                $null = Invoke-Command2 -ComputerName $instance.ComputerName -Credential $Credential -ScriptBlock { Get-ChildItem } -ErrorAction Stop
                $remoting = $true
            } catch {
                $remoting = $_
            }

            # Test Connection first using Test-Connection which requires ICMP access then failback to tcp if pings are blocked
            Write-Message -Level Verbose -Message "Testing ping to $($instance.ComputerName)"
            $pingable = Test-Connection -ComputerName $instance.ComputerName -Count 1 -Quiet

            # SQL Server connection
            if ($instance.InstanceName -ne "MSSQLSERVER") {
                #Variable marked as unused by PSScriptAnalyzer, need to be in PSCustomObject?
                #$sqlport = "N/A"
            } else {
                Write-Message -Level Verbose -Message "Testing raw socket connection to default SQL port"
                $tcp = New-Object System.Net.Sockets.TcpClient
                try {
                    $tcp.Connect($baseaddress, 1433)
                    $tcp.Close()
                    $tcp.Dispose()
                } catch {
                    # here to avoid an empty catch
                    $null = 1
                }
            }

            try {
                $server = Connect-SqlInstance -SqlInstance $instance.FullSmoName -SqlCredential $SqlCredential
                $connectSuccess = $true
            } catch {
                $connectSuccess = $false
                Stop-Function -Message "Issue connection to SQL Server on $instance" -Category ConnectionError -Target $instance -ErrorRecord $_ -Continue
            }

            $username = $server.ConnectionContext.TrueLogin
            if ($username -like "*\*") {
                $authType = "Windows Authentication"
            } else {
                $authType = "SQL Authentication"
            }

            # TCP Port
            try {
                $tcpport = (Get-DbaTcpPort -SqlInstance $server -EnableException).Port
            } catch {
                $tcpport = $_
            }

            # Auth Scheme
            try {
                $authscheme = (Test-DbaConnectionAuthScheme -SqlInstance $server -WarningVariable authwarning -WarningAction SilentlyContinue).AuthScheme
            } catch {
                $authscheme = $_
            }

            if ($authwarning) {
                $authscheme = "N/A"
            }

            [pscustomobject]@{
                ComputerName         = $resolved.ComputerName
                InstanceName         = $instance.InstanceName
                SqlInstance          = $instance.FullSmoName
                SqlVersion           = $server.Version
                ConnectingAsUser     = $username
                ConnectSuccess       = $connectSuccess
                AuthType             = $authType
                AuthScheme           = $authscheme
                TcpPort              = $tcpport
                IPAddress            = $resolved.IPAddress
                NetBiosName          = $resolved.FullComputerName
                IsPingable           = $pingable
                PSRemotingAccessible = $remoting
                DomainName           = $resolved.Domain
                LocalWindows         = $localInfo.Windows
                LocalPowerShell      = $localInfo.PowerShell
                LocalCLR             = $localInfo.CLR
                LocalSMOVersion      = $localInfo.SMO
                LocalDomainUser      = $localInfo.DomainUser
                LocalRunAsAdmin      = $localInfo.RunAsAdmin
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Test-SqlConnection
    }
}

tools\dbatools\functions\Test-DbaConnectionAuthScheme.ps1

function Test-DbaConnectionAuthScheme {
    <#
    .SYNOPSIS
        Returns the transport protocol and authentication scheme of the connection. This is useful to determine if your connection is using Kerberos.

    .DESCRIPTION
        By default, this command will return the ConnectName, ServerName, Transport and AuthScheme of the current connection.

        ConnectName is the name you used to connect. ServerName is the name that the SQL Server reports as its @@SERVERNAME which is used to register its SPN. If you were expecting a Kerberos connection and got NTLM instead, ensure ConnectName and ServerName match.

        If -Kerberos or -Ntlm is specified, the $true/$false results of the test will be returned. Returns $true or $false by default for one server. Returns Server name and Results for more than one server.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. Server(s) must be SQL Server 2005 or higher.

    .PARAMETER Kerberos
        If this switch is enabled, checks will be made for Kerberos authentication.

    .PARAMETER Ntlm
        If this switch is enabled, checks will be made for NTLM authentication.

    .PARAMETER Detailed
        Output all properties, will be deprecated in 1.0.0 release.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: SPN, Kerberos
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Test-DbaConnectionAuthScheme

    .EXAMPLE
        PS C:\> Test-DbaConnectionAuthScheme -SqlInstance sqlserver2014a, sql2016

        Returns ConnectName, ServerName, Transport and AuthScheme for sqlserver2014a and sql2016.

    .EXAMPLE
        PS C:\> Test-DbaConnectionAuthScheme -SqlInstance sqlserver2014a -Kerberos

        Returns $true or $false depending on if the connection is Kerberos or not.

    .EXAMPLE
        PS C:\> Test-DbaConnectionAuthScheme -SqlInstance sqlserver2014a | Select-Object *

        Returns the results of "SELECT * from sys.dm_exec_connections WHERE session_id = @@SPID"

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential", "Cred")]
        [PSCredential]$SqlCredential,
        [switch]$Kerberos,
        [switch]$Ntlm,
        [switch]$Detailed,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        Test-DbaDeprecation -DeprecatedOn 1.0.0 -Parameter Detailed

        $sql = "SELECT  SERVERPROPERTY('MachineName') AS ComputerName,
                            ISNULL(SERVERPROPERTY('InstanceName'), 'MSSQLSERVER') AS InstanceName,
                            SERVERPROPERTY('ServerName') AS SqlInstance,
                            session_id as SessionId, most_recent_session_id as MostRecentSessionId, connect_time as ConnectTime,
                            net_transport as Transport, protocol_type as ProtocolType, protocol_version as ProtocolVersion,
                            endpoint_id as EndpointId, encrypt_option as EncryptOption, auth_scheme as AuthScheme, node_affinity as NodeAffinity,
                            num_reads as NumReads, num_writes as NumWrites, last_read as LastRead, last_write as LastWrite,
                            net_packet_size as PacketSize, client_net_address as ClientNetworkAddress, client_tcp_port as ClientTcpPort,
                            local_net_address as ServerNetworkAddress, local_tcp_port as ServerTcpPort, connection_id as ConnectionId,
                            parent_connection_id as ParentConnectionId, most_recent_sql_handle as MostRecentSqlHandle
                            FROM sys.dm_exec_connections WHERE session_id = @@SPID"
    }

    process {
        foreach ($instance in $SqlInstance) {

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            Write-Message -Level Verbose -Message "Getting results for the following query: $sql."
            try {
                $results = $server.Query($sql)
            } catch {
                Stop-Function -Message "Failure" -Target $server -Exception $_ -Continue
            }

            # sorry, standards!
            if ($Kerberos -or $Ntlm) {
                if ($Ntlm) {
                    $auth = 'NTLM'
                } else {
                    $auth = 'Kerberos'
                }
                [PSCustomObject]@{
                    ComputerName = $results.ComputerName
                    InstanceName = $results.InstanceName
                    SqlInstance  = $results.SqlInstance
                    Result       = ($server.AuthScheme -eq $auth)
                } | Select-DefaultView -Property SqlInstance, Result
            } else {
                Select-DefaultView -InputObject $results -Property ComputerName, InstanceName, SqlInstance, Transport, AuthScheme
            }
        }
    }
}

tools\dbatools\functions\Test-DbaDbCollation.ps1

function Test-DbaDbCollation {
    <#
    .SYNOPSIS
        Compares Database Collations to Server Collation

    .DESCRIPTION
        Compares Database Collations to Server Collation

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        Specifies the database(s) to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        Specifies the database(s) to exclude from processing. Options for this list are auto-populated from the server.

    .PARAMETER Detailed
        Output all properties, will be deprecated in 1.0.0 release.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Database, Collation
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Test-DbaDbCollation

    .EXAMPLE
        PS C:\> Test-DbaDbCollation -SqlInstance sqlserver2014a

        Returns server name, database name and true/false if the collations match for all databases on sqlserver2014a.

    .EXAMPLE
        PS C:\> Test-DbaDbCollation -SqlInstance sqlserver2014a -Database db1, db2

        Returns information for the db1 and db2 databases on sqlserver2014a.

    .EXAMPLE
        PS C:\> Test-DbaDbCollation -SqlInstance sqlserver2014a, sql2016 -Exclude db1

        Returns information for database and server collations for all databases except db1 on sqlserver2014a and sql2016.

    .EXAMPLE
        PS C:\> Get-DbaCmsRegServer -SqlInstance sql2016 | Test-DbaDbCollation

        Returns db/server collation information for every database on every server listed in the Central Management Server on sql2016.

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [switch]$Detailed,
        [switch]$EnableException
    )
    begin {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Parameter "Detailed"
    }
    process {
        foreach ($instance in $sqlinstance) {
            # Try connecting to the instance
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $dbs = $server.Databases | Where-Object IsAccessible

            if ($Database) {
                $dbs = $dbs | Where-Object { $Database -contains $_.Name }
            }

            if ($ExcludeDatabase) {
                $dbs = $dbs | Where-Object Name -NotIn $ExcludeDatabase
            }

            foreach ($db in $dbs) {
                Write-Message -Level Verbose -Message "Processing $($db.name) on $servername."
                [PSCustomObject]@{
                    ComputerName      = $server.ComputerName
                    InstanceName      = $server.ServiceName
                    SqlInstance       = $server.DomainInstanceName
                    Database          = $db.name
                    ServerCollation   = $server.collation
                    DatabaseCollation = $db.collation
                    IsEqual           = $db.collation -eq $server.collation
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Test-DbaDatabaseCollation
    }
}

tools\dbatools\functions\Test-DbaDbCompatibility.ps1

function Test-DbaDbCompatibility {
    <#
    .SYNOPSIS
        Compares Database Compatibility level to Server Compatibility

    .DESCRIPTION
        Compares Database Compatibility level to Server Compatibility

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER Credential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        Specifies the database(s) to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        Specifies the database(s) to exclude from processing. Options for this list are auto-populated from the server.

    .PARAMETER Detailed
        Will be deprecated in 1.0.0 release.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Database, Compatibility
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Test-DbaDbCompatibility

    .EXAMPLE
        PS C:\> Test-DbaDbCompatibility -SqlInstance sqlserver2014a

        Returns server name, database name and true/false if the compatibility level match for all databases on sqlserver2014a.

    .EXAMPLE
        PS C:\> Test-DbaDbCompatibility -SqlInstance sqlserver2014a -Database db1, db2

        Returns detailed information for database and server compatibility level for the db1 and db2 databases on sqlserver2014a.

    .EXAMPLE
        PS C:\> Test-DbaDbCompatibility -SqlInstance sqlserver2014a, sql2016 -Exclude db1

        Returns detailed information for database and server compatibility level for all databases except db1 on sqlserver2014a and sql2016.

    .EXAMPLE
        PS C:\> Get-DbaCmsRegServer -SqlInstance sql2014 | Test-DbaDbCompatibility

        Returns db/server compatibility information for every database on every server listed in the Central Management Server on sql2016.

    #>
    [CmdletBinding()]
    [OutputType("System.Collections.ArrayList")]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$Credential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [switch]$Detailed,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Parameter "Detailed"
    }

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 10
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $serverversion = "Version$($server.VersionMajor)0"
            $dbs = $server.Databases | Where-Object IsAccessible

            if ($Database) {
                $dbs = $dbs | Where-Object { $Database -contains $_.Name }
            }

            if ($ExcludeDatabase) {
                $dbs = $dbs | Where-Object Name -NotIn $ExcludeDatabase
            }

            foreach ($db in $dbs) {
                Write-Message -Level Verbose -Message "Processing $($db.name) on $instance."
                [PSCustomObject]@{
                    ComputerName          = $server.ComputerName
                    InstanceName          = $server.ServiceName
                    SqlInstance           = $server.DomainInstanceName
                    ServerLevel           = $serverversion
                    Database              = $db.name
                    DatabaseCompatibility = $db.CompatibilityLevel
                    IsEqual               = $db.CompatibilityLevel -eq $serverversion
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Test-DbaDatabaseCompatibility
    }
}

tools\dbatools\functions\Test-DbaDbCompression.ps1

function Test-DbaDbCompression {
    <#
    .SYNOPSIS
        Returns tables and indexes with preferred compression setting.
    .DESCRIPTION
        This function returns the results of a full table/index compression analysis and the estimated, best option to date for either NONE, Page, or Row Compression.

        Remember Uptime is critical, the longer uptime, the more accurate the analysis is, and it would be best if you utilized Get-DbaUptime first, before running this command.

        Test-DbaDbCompression script derived from GitHub and the tigertoolbox
        (https://github.com/Microsoft/tigertoolbox/tree/master/Evaluate-Compression-Gains)
        In the output, you will find the following information:
        - Column Percent_Update shows the percentage of update operations on a specific table, index, or partition, relative to total operations on that object. The lower the percentage of Updates (that is, the table, index, or partition is infrequently updated), the better candidate it is for page compression.
        - Column Percent_Scan shows the percentage of scan operations on a table, index, or partition, relative to total operations on that object. The higher the value of Scan (that is, the table, index, or partition is mostly scanned), the better candidate it is for page compression.
        - Column Compression_Type_Recommendation can have four possible outputs indicating where there is most gain, if any: 'PAGE', 'ROW', 'NO_GAIN' or '?'. When the output is '?' this approach could not give a recommendation, so as a rule of thumb I would lean to ROW if the object suffers mainly UPDATES, or PAGE if mainly INSERTS, but this is where knowing your workload is essential. When the output is 'NO_GAIN' well, that means that according to sp_estimate_data_compression_savings no space gains will be attained when compressing, as in the above output example, where compressing would grow the affected object.

        This script will execute on the context of the current database.
        Also be aware that this may take a while to execute on large objects, because if the IS locks taken by the
        sp_estimate_data_compression_savings cannot be honored, the SP will be blocked.
        It only considers Row or Page Compression (not column compression)
        It only evaluates User Tables

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto-populated from the server

    .PARAMETER Schema
        Filter to only get specific schemas If unspecified, all schemas will be processed.

    .PARAMETER Table
        Filter to only get specific tables If unspecified, all User tables will be processed.

    .PARAMETER ResultSize
        Allows you to limit the number of results returned, as some systems can have very large number of tables.  Default value is no restriction.

    .PARAMETER Rank
        Allows you to specify the field used for ranking when determining the ResultSize
        Can be either TotalPages, UsedPages or TotalRows with default of TotalPages. Only applies when ResultSize is used.

    .PARAMETER FilterBy
        Allows you to specify level of filtering when determining the ResultSize
        Can be at either Table, Index or Partition level with default of Partition. Only applies when ResultSize is used.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .INPUTS
        Accepts a DbaInstanceParameter. Any collection of SQL Server Instance names or SMO objects can be piped to command.

    .OUTPUTS
        Returns a PsCustomObject with following fields: ComputerName, InstanceName, SqlInstance, Database, IndexName, Partition, IndexID, PercentScan, PercentUpdate, RowEstimatePercentOriginal, PageEstimatePercentOriginal, CompressionTypeRecommendation, SizeCurrent, SizeRequested, PercentCompression

    .NOTES
        Tags: Compression, Table, Database
        Author: Jason Squires (@js_0505), [email protected]

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Test-DbaDbCompression

    .EXAMPLE
        PS C:\> Test-DbaDbCompression -SqlInstance localhost

        Returns results of all potential compression options for all databases for the default instance on the local host. Returns a recommendation of either Page, Row or NO_GAIN

    .EXAMPLE
        PS C:\> Test-DbaDbCompression -SqlInstance ServerA

        Returns results of all potential compression options for all databases on the instance ServerA

    .EXAMPLE
        PS C:\> Test-DbaDbCompression -SqlInstance ServerA -Database DBName | Out-GridView

        Returns results of all potential compression options for a single database DBName with the recommendation of either Page or Row or NO_GAIN in a nicely formatted GridView

    .EXAMPLE
        PS C:\> $cred = Get-Credential sqladmin
        PS C:\> Test-DbaDbCompression -SqlInstance ServerA -ExcludeDatabase MyDatabase -SqlCredential $cred

        Returns results of all potential compression options for all databases except MyDatabase on instance ServerA using SQL credentials to authentication to ServerA.
        Returns the recommendation of either Page, Row or NO_GAIN

    .EXAMPLE
        PS C:\> Test-DbaDbCompression -SqlInstance ServerA -Schema Test -Table MyTable

        Returns results of all potential compression options for the Table Test.MyTable in instance ServerA on ServerA and ServerB.
        Returns the recommendation of either Page, Row or NO_GAIN.
        Returns a result for each partition of any Heap, Clustered or NonClustered index.

    .EXAMPLE
        PS C:\> Test-DbaDbCompression -SqlInstance ServerA, ServerB -ResultSize 10

        Returns results of all potential compression options for all databases on ServerA and ServerB.
        Returns the recommendation of either Page, Row or NO_GAIN.
        Returns results for the top 10 partitions by TotalPages used per database.

    .EXAMPLE
        PS C:\> ServerA | Test-DbaDbCompression -Schema Test -ResultSize 10 -Rank UsedPages -FilterBy Table

        Returns results of all potential compression options for all databases on ServerA containing a schema Test
        Returns results for the top 10 Tables by Used Pages per database.
        Results are split by Table, Index and Partition so more than 10 results may be returned.

    .EXAMPLE
        PS C:\> $servers = 'Server1','Server2'
        PS C:\> $servers | Test-DbaDbCompression -Database DBName | Out-GridView

        Returns results of all potential compression options for a single database DBName on Server1 or Server2
        Returns the recommendation of either Page, Row or NO_GAIN in a nicely formatted GridView

    .EXAMPLE
        PS C:\> $cred = Get-Credential sqladmin
        PS C:\> Test-DbaDbCompression -SqlInstance ServerA -Database MyDB -SqlCredential $cred -Schema Test -Table Test1, Test2

        Returns results of all potential compression options for objects in Database MyDb on instance ServerA using SQL credentials to authentication to ServerA.
        Returns the recommendation of either Page, Row or NO_GAIN for tables with SchemA Test and name in Test1 or Test2

    .EXAMPLE
        PS C:\> $servers = 'Server1','Server2'
        PS C:\> foreach ($svr in $servers) {
        >> Test-DbaDbCompression -SqlInstance $svr | Export-Csv -Path C:\temp\CompressionAnalysisPAC.csv -Append
        >> }

        This produces a full analysis of all your servers listed and is pushed to a csv for you to analyze.

    #>
    [CmdletBinding(DefaultParameterSetName = "Default")]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [string[]]$Schema,
        [string[]]$Table,
        [int]$ResultSize,
        [ValidateSet('TotalPages', 'UsedPages', 'TotalRows')]
        [string]$Rank = 'TotalPages',
        [ValidateSet('Partition', 'Index', 'Table')]
        [string]$FilterBy = 'Partition',
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        Write-Message -Level System -Message "Bound parameters: $($PSBoundParameters.Keys -join ", ")"

        if ($Schema) {
            $sqlSchemaWhere = "AND s.name IN ('$($Schema -join "','")')"
        }

        if ($Table) {
            $sqlTableWhere = "AND t.name IN ('$($Table -join "','")')"
        }

        if ($ResultSize) {
            $sqlOrderBy = switch ($Rank) {
                UsedPages { 'UsedSpaceKB' }
                TotalRows { 'RowCounts' }
                default { 'TotalSpaceKB' }
            }

            if ($FilterBy -eq 'Table') {
                $sqlJoinFiltered = 'AND t.TableName = tdc.TableName COLLATE DATABASE_DEFAULT'
                $indexSQL = '0 as [IndexID]'
                $partitionSQL = '0 AS [Partition]'
                $groupBySQL = 's.Name, t.Name'
            } elseif ($FilterBy -eq 'Index') {
                $sqlJoinFiltered = 'AND t.TableName = tdc.TableName COLLATE DATABASE_DEFAULT AND t.IndexID = tdc.IndexID'
                $indexSQL = 'i.index_id as [IndexID]'
                $partitionSQL = '0 AS [Partition]'
                $groupBySQL = 's.Name, t.Name, i.index_id'
            } else {
                $sqlJoinFiltered = 'AND t.TableName = tdc.TableName COLLATE DATABASE_DEFAULT AND t.IndexID = tdc.IndexID AND t.[Partition] = tdc.[Partition]'
                $indexSQL = 'i.index_id as [IndexID]'
                $partitionSQL = 'p.partition_number AS [Partition]'
                $groupBySQL = 's.Name, t.Name, i.index_id, p.partition_number'
            }

            $sqlRestrict = "-- remove tables not in Top N
                With TopN(SchemaName, TableName, IndexID, [Partition], RowCounts, TotalSpaceKB, UsedSpaceKB) as
                (
                    SELECT TOP $ResultSize
                        s.Name AS SchemaName,
                        t.NAME as TableName,
                        $indexSQL,
                        $partitionSQL,
                        SUM(p.rows) AS RowCounts,
                        SUM(a.total_pages) * 8 AS TotalSpaceKB,
                        SUM(a.used_pages) * 8 AS UsedSpaceKB
                    FROM
                        sys.tables t
                    INNER JOIN
                        sys.indexes i ON t.OBJECT_ID = i.object_id
                    INNER JOIN
                        sys.partitions p ON i.object_id = p.OBJECT_ID AND i.index_id = p.index_id
                    INNER JOIN
                        sys.allocation_units a ON p.partition_id = a.container_id
                    LEFT OUTER JOIN
                        sys.schemas s ON t.schema_id = s.schema_id
                    WHERE objectproperty(t.object_id, 'IsUserTable') = 1
                        AND p.data_compression_desc = 'NONE'
                        AND p.rows > 0
                        $sqlSchemaWhere
                        $sqlTableWhere
                    GROUP BY
                        $groupBySQL
                    ORDER BY
                        $sqlOrderBy Desc
                )
                DELETE tdc
                FROM ##testdbacompression tdc
                LEFT JOIN TopN t
                    ON t.SchemaName = tdc.[Schema] COLLATE DATABASE_DEFAULT
                    $sqlJoinFiltered
                WHERE t.IndexID IS NULL;"
        }
    }

    process {

        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 10
            } catch {
                Stop-Function -Message "Failed to process Instance $Instance" -ErrorRecord $_ -Target $instance -Continue
            }

            $Server.ConnectionContext.StatementTimeout = 0
            $sqlVersion = $(Get-DbaBuildReference -SqlInstance $server).Build.Major

            $sqlVersionRestrictions = @()

            if ($sqlVersion -ge 12) {
                $sqlVersionRestrictions += "
            BEGIN
                -- remove memory optimized tables
                DELETE tdc
                FROM ##testdbacompression tdc
                INNER JOIN sys.tables t
                    ON SCHEMA_NAME(t.schema_id) = tdc.[Schema] COLLATE DATABASE_DEFAULT
                    AND t.name = tdc.TableName COLLATE DATABASE_DEFAULT
                WHERE t.is_memory_optimized = 1
            END"
            }
            if ($sqlVersion -ge 13) {
                $sqlVersionRestrictions += "
            BEGIN
                -- remove tables with encrypted columns
                DELETE tdc
                FROM ##testdbacompression tdc
                INNER JOIN sys.tables t
                    ON SCHEMA_NAME(t.schema_id) = tdc.[Schema] COLLATE DATABASE_DEFAULT
                    AND t.name = tdc.TableName COLLATE DATABASE_DEFAULT
                INNER JOIN sys.columns c
                    ON t.object_id = c.object_id
                WHERE encryption_type IS NOT NULL
            END"
            }
            if ($sqlVersion -ge 14) {
                $sqlVersionRestrictions += "
            BEGIN
                -- remove graph (node/edge) tables
                DELETE tdc
                FROM ##testdbacompression tdc
                INNER JOIN sys.tables t
                    ON tdc.[Schema] = SCHEMA_NAME(t.schema_id) COLLATE DATABASE_DEFAULT
                    AND tdc.TableName = t.name COLLATE DATABASE_DEFAULT
                WHERE (is_node = 1 OR is_edge = 1)
            END"
            }
            $sql = "SET NOCOUNT ON;

IF OBJECT_ID('tempdb..##testdbacompression', 'U') IS NOT NULL
    DROP TABLE ##testdbacompression

IF OBJECT_ID('tempdb..##tmpEstimateRow', 'U') IS NOT NULL
    DROP TABLE ##tmpEstimateRow

IF OBJECT_ID('tempdb..##tmpEstimatePage', 'U') IS NOT NULL
    DROP TABLE ##tmpEstimatePage

CREATE TABLE ##testdbacompression (
    [Schema] SYSNAME
    ,[TableName] SYSNAME
    ,[ObjectId] INT
    ,[IndexName] SYSNAME NULL
    ,[Partition] INT
    ,[IndexID] INT
    ,[IndexType] VARCHAR(25)
    ,[PercentScan] SMALLINT
    ,[PercentUpdate] SMALLINT
    ,[RowEstimatePercentOriginal] BIGINT
    ,[PageEstimatePercentOriginal] BIGINT
    ,[CompressionTypeRecommendation] VARCHAR(7)
    ,SizeCurrent BIGINT
    ,SizeRequested BIGINT
    ,PercentCompression NUMERIC(10, 2)
    );

CREATE TABLE ##tmpEstimateRow (
    objname SYSNAME
    ,schname SYSNAME
    ,indid INT
    ,partnr INT
    ,SizeCurrent BIGINT
    ,SizeRequested BIGINT
    ,SampleCurrent BIGINT
    ,SampleRequested BIGINT
    );

CREATE TABLE ##tmpEstimatePage (
    objname SYSNAME
    ,schname SYSNAME
    ,indid INT
    ,partnr INT
    ,SizeCurrent BIGINT
    ,SizeRequested BIGINT
    ,SampleCurrent BIGINT
    ,SampleRequested BIGINT
    );

INSERT INTO ##testdbacompression (
    [Schema]
    ,[TableName]
    ,[ObjectId]
    ,[IndexName]
    ,[Partition]
    ,[IndexID]
    ,[IndexType]
    ,[PercentScan]
    ,[PercentUpdate]
    )
    SELECT s.NAME AS [Schema]
    ,t.NAME AS [TableName]
    ,t.OBJECT_ID AS [OBJECTID]
    ,x.NAME AS [IndexName]
    ,p.partition_number AS [Partition]
    ,x.Index_ID AS [IndexID]
    ,x.type_desc AS [IndexType]
    ,NULL AS [PercentScan]
    ,NULL AS [PercentUpdate]
FROM sys.tables t
INNER JOIN sys.schemas s ON t.schema_id = s.schema_id
INNER JOIN sys.indexes x ON x.object_id = t.object_id
INNER JOIN sys.partitions p ON x.object_id = p.object_id
    AND x.Index_ID = p.Index_ID
WHERE objectproperty(t.object_id, 'IsUserTable') = 1
    AND p.data_compression_desc = 'NONE'
    AND p.rows > 0
    $sqlSchemaWhere
    $sqlTableWhere
ORDER BY [TableName] ASC;

$sqlRestrict

$sqlVersionRestrictions

DECLARE @schema SYSNAME
    ,@tbname SYSNAME
    ,@ixid INT

DECLARE cur CURSOR FAST_FORWARD
FOR
SELECT [Schema]
    ,[TableName]
    ,[IndexID]
FROM ##testdbacompression

OPEN cur

FETCH NEXT
FROM cur
INTO @schema
    ,@tbname
    ,@ixid

WHILE @@FETCH_STATUS = 0
BEGIN
    DECLARE @sqlcmd NVARCHAR(500)

    SET @sqlcmd = 'EXEC sp_estimate_data_compression_savings ''' + @schema + ''', ''' + @tbname + ''', ''' + cast(@ixid AS VARCHAR) + ''', NULL, ''ROW''';

    INSERT INTO ##tmpEstimateRow (
        objname
        ,schname
        ,indid
        ,partnr
        ,SizeCurrent
        ,SizeRequested
        ,SampleCurrent
        ,SampleRequested
        )
    EXECUTE sp_executesql @sqlcmd

    SET @sqlcmd = 'EXEC sp_estimate_data_compression_savings ''' + @schema + ''', ''' + @tbname + ''', ''' + cast(@ixid AS VARCHAR) + ''', NULL, ''PAGE''';

    INSERT INTO ##tmpEstimatePage (
        objname
        ,schname
        ,indid
        ,partnr
        ,SizeCurrent
        ,SizeRequested
        ,SampleCurrent
        ,SampleRequested
        )
    EXECUTE sp_executesql @sqlcmd

    FETCH NEXT
    FROM cur
    INTO @schema
        ,@tbname
        ,@ixid
END

CLOSE cur

DEALLOCATE cur;

--Update usage and partition_number - If database was restore the sys.dm_db_index_operational_stats will be empty until tables have accesses. Executing the sp_estimate_data_compression_savings first will make those entries appear
UPDATE ##testdbacompression
SET
 [PercentScan] =
     case when (i.range_scan_count + i.leaf_insert_count + i.leaf_delete_count + i.leaf_update_count + i.leaf_page_merge_count + i.singleton_lookup_count) = 0 THEN 0
     ELSE i.range_scan_count * 100.0 / NULLIF((i.range_scan_count + i.leaf_insert_count + i.leaf_delete_count + i.leaf_update_count + i.leaf_page_merge_count + i.singleton_lookup_count), 0)
     END
 ,[PercentUpdate] =
    case when (i.range_scan_count + i.leaf_insert_count + i.leaf_delete_count + i.leaf_update_count + i.leaf_page_merge_count + i.singleton_lookup_count) = 0 THEN 0
    ELSE i.leaf_update_count * 100.0 / NULLIF((i.range_scan_count + i.leaf_insert_count + i.leaf_delete_count + i.leaf_update_count + i.leaf_page_merge_count + i.singleton_lookup_count), 0)
    END
FROM sys.dm_db_index_operational_stats(db_id(), NULL, NULL, NULL) i
INNER JOIN ##testdbacompression tmp
    ON tmp.ObjectId = i.object_id
    AND tmp.IndexID = i.index_id;


WITH tmp_cte (
    objname
    ,schname
    ,indid
    ,partnr
    ,pct_of_orig_row
    ,pct_of_orig_page
    ,SizeCurrent
    ,SizeRequested
    )
AS (
    SELECT tr.objname
        ,tr.schname
        ,tr.indid
        ,tr.partnr
        ,(tr.SampleRequested * 100) / CASE
            WHEN tr.SampleCurrent = 0
                THEN 1
            ELSE tr.SampleCurrent
            END AS pct_of_orig_row
        ,(tp.SampleRequested * 100) / CASE
            WHEN tp.SampleCurrent = 0
                THEN 1
            ELSE tp.SampleCurrent
            END AS pct_of_orig_page
        ,tr.SizeCurrent
        ,tr.SizeRequested
    FROM ##tmpestimaterow tr
    INNER JOIN ##tmpestimatepage tp ON tr.objname = tp.objname
        AND tr.schname = tp.schname
        AND tr.indid = tp.indid
        AND tr.partnr = tp.partnr
    )
UPDATE ##testdbacompression
SET [RowEstimatePercentOriginal] = tcte.pct_of_orig_row
    ,[PageEstimatePercentOriginal] = tcte.pct_of_orig_page
    ,SizeCurrent = tcte.SizeCurrent
    ,SizeRequested = tcte.SizeRequested
    ,PercentCompression = 100 - (cast(tcte.[SizeRequested] AS NUMERIC(21, 2)) * 100 / (tcte.[SizeCurrent] - ABS(SIGN(tcte.[SizeCurrent])) + 1))
FROM tmp_cte tcte
    ,##testdbacompression tcomp
WHERE tcte.objname = tcomp.TableName
    AND tcte.schname = tcomp.[schema]
    AND tcte.indid = tcomp.IndexID
    AND tcte.partnr = tcomp.Partition;

WITH tmp_cte2 (
    TableName
    ,[schema]
    ,IndexID
    ,[CompressionTypeRecommendation]
    )
AS (
    SELECT TableName
        ,[schema]
        ,IndexID
        ,CASE
            WHEN [RowEstimatePercentOriginal] >= 100
                AND [PageEstimatePercentOriginal] >= 100
                THEN 'NO_GAIN'
            WHEN [PercentUpdate] >= 10
                THEN 'ROW'
            WHEN [PercentScan] <= 1
                AND [PercentUpdate] <= 1
                AND [RowEstimatePercentOriginal] < [PageEstimatePercentOriginal]
                THEN 'ROW'
            WHEN [PercentScan] <= 1
                AND [PercentUpdate] <= 1
                AND [RowEstimatePercentOriginal] > [PageEstimatePercentOriginal]
                THEN 'PAGE'
            WHEN [PercentScan] >= 60
                AND [PercentUpdate] <= 5
                THEN 'PAGE'
            WHEN [PercentScan] <= 35
                AND [PercentUpdate] <= 5
                THEN '?'
            ELSE 'ROW'
            END
    FROM ##testdbacompression
    )
UPDATE ##testdbacompression
SET [CompressionTypeRecommendation] = tcte2.[CompressionTypeRecommendation]
FROM tmp_cte2 tcte2
    ,##testdbacompression tcomp2
WHERE tcte2.TableName = tcomp2.TableName
    AND tcte2.[schema] = tcomp2.[schema]
    AND tcte2.IndexID = tcomp2.IndexID;

SET NOCOUNT ON;

SELECT DBName = DB_Name()
    ,[Schema]
    ,[TableName]
    ,[IndexName]
    ,[Partition]
    ,[IndexID]
    ,[IndexType]
    ,[PercentScan]
    ,[PercentUpdate]
    ,[RowEstimatePercentOriginal]
    ,[PageEstimatePercentOriginal]
    ,[CompressionTypeRecommendation]
    ,SizeCurrentKB = [SizeCurrent]
    ,SizeRequestedKB = [SizeRequested]
    ,PercentCompression
FROM ##testdbacompression;

IF OBJECT_ID('tempdb..##setdbacompression', 'U') IS NOT NULL
    DROP TABLE ##testdbacompression

IF OBJECT_ID('tempdb..##tmpEstimateRow', 'U') IS NOT NULL
    DROP TABLE ##tmpEstimateRow

IF OBJECT_ID('tempdb..##tmpEstimatePage', 'U') IS NOT NULL
    DROP TABLE ##tmpEstimatePage;

"
            Write-Message -Level Debug -Message "SQL Statement: $sql"
            [long]$instanceVersionNumber = $($server.VersionString).Replace(".", "")


            #If SQL Server 2016 SP1 (13.0.4001.0) or higher every version supports compression.
            if ($Server.EngineEdition -ne "EnterpriseOrDeveloper" -and $instanceVersionNumber -lt 13040010) {
                Stop-Function -Message "Compression before SQLServer 2016 SP1 (13.0.4001.0) is only supported by enterprise, developer or evaluation edition. $Server has version $($server.VersionString) and edition is $($Server.EngineEdition)." -Target $db -Continue
            }
            #Filter Database list
            try {
                $dbs = $server.Databases | Where-Object IsAccessible

                if ($Database) {
                    $dbs = $dbs | Where-Object { $Database -contains $_.Name -and $_.IsSystemObject -eq 0 }
                }

                else {
                    $dbs = $dbs | Where-Object { $_.IsSystemObject -eq 0 }
                }

                if (Test-Bound "ExcludeDatabase") {
                    $dbs = $dbs | Where-Object Name -NotIn $ExcludeDatabase
                }
            } catch {
                Stop-Function -Message "Unable to gather list of databases for $instance" -Target $instance -ErrorRecord $_ -Continue
            }

            foreach ($db in $dbs) {
                try {
                    $dbCompatibilityLevel = [int]($db.CompatibilityLevel.ToString().Replace('Version', ''))

                    Write-Message -Level Verbose -Message "Querying $instance - $db"
                    if ($db.status -ne 'Normal' -or $db.IsAccessible -eq $false) {
                        Write-Message -Level Warning -Message "$db is not accessible." -Target $db
                        Continue
                    }

                    if ($dbCompatibilityLevel -lt 100) {
                        Stop-Function -Message "$db has a compatibility level lower than Version100 and will be skipped." -Target $db -Continue
                        Continue
                    }
                    #Execute query against individual database and add to output
                    foreach ($row in ($server.Query($sql, $db.Name))) {
                        [pscustomobject]@{
                            ComputerName                  = $server.ComputerName
                            InstanceName                  = $server.ServiceName
                            SqlInstance                   = $server.DomainInstanceName
                            Database                      = $row.DBName
                            Schema                        = $row.Schema
                            TableName                     = $row.TableName
                            IndexName                     = $row.IndexName
                            Partition                     = $row.Partition
                            IndexID                       = $row.IndexID
                            IndexType                     = $row.IndexType
                            PercentScan                   = $row.PercentScan
                            PercentUpdate                 = $row.PercentUpdate
                            RowEstimatePercentOriginal    = $row.RowEstimatePercentOriginal
                            PageEstimatePercentOriginal   = $row.PageEstimatePercentOriginal
                            CompressionTypeRecommendation = $row.CompressionTypeRecommendation
                            SizeCurrent                   = [dbasize]($row.SizeCurrentKB * 1024)
                            SizeRequested                 = [dbasize]($row.SizeRequestedKB * 1024)
                            PercentCompression            = $row.PercentCompression
                        }
                    }
                } catch {
                    Stop-Function -Message "Unable to query $instance - $db" -Target $db -ErrorRecord $_ -Continue
                }
            }
        }
    }
}

tools\dbatools\functions\Test-DbaDbLogShipStatus.ps1

function Test-DbaDbLogShipStatus {
    <#
    .SYNOPSIS
        Test-DbaDbLogShipStatus returns the status of your log shipping databases

    .DESCRIPTION
        Most of the time your log shipping "just works".
        Checking your log shipping status can be done really easy with this function.

        Make sure you're connecting to the monitoring instance of your log shipping infrastructure.

        The function will return the status for a database. This can be one or more messages in a comma separated list.
        If everything is OK with the database than you should only see the message "All OK".

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2000 or greater.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        Allows you to filter the results to only return the databases you're interested in. This can be one or more values separated by commas.
        This is not a wildcard and should be the exact database name. See examples for more info.

    .PARAMETER ExcludeDatabase
        Allows you to filter the results to only return the databases you're not interested in. This can be one or more values separated by commas.
        This is not a wildcard and should be the exact database name.

    .PARAMETER Primary
        Allows to filter the results to only return values that apply to the primary instance.

    .PARAMETER Secondary
        Allows to filter the results to only return values that apply to the secondary instance.

    .PARAMETER Simple
        By default all the information will be returned.
        If this parameter is used you get an overview with the SQL Instance, Database, Instance Type and the status

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: LogShipping
        Author: Sander Stad (@sqlstad), sqlstad.nl

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Test-DbaDbLogShipStatus

    .EXAMPLE
        PS C:\> Test-DbaDbLogShipStatus -SqlInstance sql1

        Retrieves the log ship information from sql1 and displays all the information present including the status.

    .EXAMPLE
        PS C:\> Test-DbaDbLogShipStatus -SqlInstance sql1 -Database AdventureWorks2014

        Retrieves the log ship information for just the database AdventureWorks.

    .EXAMPLE
        PS C:\> Test-DbaDbLogShipStatus -SqlInstance sql1 -Primary

        Retrieves the log ship information and only returns the information for the databases on the primary instance.

    .EXAMPLE
        PS C:\> Test-DbaDbLogShipStatus -SqlInstance sql1 -Secondary

        Retrieves the log ship information and only returns the information for the databases on the secondary instance.

    .EXAMPLE
        PS C:\> Test-DbaDbLogShipStatus -SqlInstance sql1 -Simple

        Retrieves the log ship information and only returns the columns SQL Instance, Database, Instance Type and Status

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$Database,
        [string[]]$ExcludeDatabase,
        [switch]$Simple,
        [switch]$Primary,
        [switch]$Secondary,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        # Setup the query
        [string[]]$query = "
IF ( OBJECT_ID('tempdb..#logshippingstatus') ) IS NOT NULL
BEGIN
DROP TABLE #logshippingstatus;
END;

CREATE TABLE #logshippingstatus
(
    Status BIT ,
    IsPrimary BIT ,
    Server VARCHAR(100) ,
    DatabaseName VARCHAR(100) ,
    TimeSinceLastBackup INT ,
    LastBackupFile VARCHAR(255) ,
    BackupThreshold INT ,
    IsBackupAlertEnabled BIT ,
    TimeSinceLastCopy INT ,
    LastCopiedFile VARCHAR(255) ,
    TimeSinceLastRestore INT ,
    LastRestoredFile VARCHAR(255) ,
    LastRestoredLatency INT ,
    RestoreThreshold INT ,
    IsRestoreAlertEnabled BIT
);

INSERT INTO #logshippingstatus
(   Status ,
    IsPrimary ,
    Server ,
    DatabaseName ,
    TimeSinceLastBackup ,
    LastBackupFile ,
    BackupThreshold ,
    IsBackupAlertEnabled ,
    TimeSinceLastCopy ,
    LastCopiedFile ,
    TimeSinceLastRestore ,
    LastRestoredFile ,
    LastRestoredLatency ,
    RestoreThreshold ,
    IsRestoreAlertEnabled
)
EXEC master.sys.sp_help_log_shipping_monitor"

        $select = "SELECT * FROM #logshippingstatus"

        if ($Database -or $ExcludeDatabase) {

            if ($database) {
                $where += "DatabaseName IN ('$($Database -join ''',''')')"
            } elseif ($ExcludeDatabase) {
                $where += "DatabaseName NOT IN ('$($ExcludeDatabase -join ''',''')')"
            }

            $select = "$select WHERE $where"
        }

        $query += $select
        $query += "DROP TABLE #logshippingstatus"
        $sql = $query -join ";`n"
        Write-Message -level Debug -Message $sql
    }

    process {
        foreach ($instance in $sqlinstance) {
            # Try connecting to the instance
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            if ($server.EngineEdition -match "Express") {
                Write-Message -Level Warning -Message "$instance is Express Edition which does not support Log Shipping"
                continue
            }

            # Check the variables
            if ($Primary -and $Secondary) {
                Stop-Function -Message "Invalid parameter combination. Please enter either -Primary or -Secondary" -Target $instance -Continue
            }

            # Get the log shipped databases
            $results = $server.Query($sql)

            # Check if any rows were returned
            if ($results.Count -lt 1) {
                Stop-Function -Message "No information available about any log shipped databases for $instance. Please check the instance name." -Target $instance -Continue
            }

            # Filter the results
            if ($Primary) {
                $results = $results | Where-Object { $_.IsPrimary -eq $true }
            }

            if ($Secondary) {
                $results = $results | Where-Object { $_.IsPrimary -eq $false }
            }

            # Loop through each of the results
            foreach ($result in $results) {

                # Setup a variable to hold the errors
                $statusDetails = @()

                # Check if there are any results that need to be returned
                if ($result.Status -notin 0, 1) {
                    $statusDetails += "N/A"
                } else {
                    # Check the status of the row is true which indicates that something is wrong
                    if ($result.Status) {
                        # Check if the row is part of the primary or secondary instance
                        if ($result.IsPrimary) {
                            # Check the backup
                            if (-not $result.TimeSinceLastBackup) {
                                $statusDetails += "The backup has never been executed."
                            } elseif ($result.TimeSinceLastBackup -ge $result.BackupThreshold) {
                                $statusDetails += "The backup has not been executed in the last $($result.BackupThreshold) minutes"
                            }
                        } elseif (-not $result.IsPrimary) {
                            # Check the restore
                            if ($null -eq $result.TimeSinceLastRestore) {
                                $statusDetails += "The restore has never been executed."
                            } elseif ($result.TimeSinceLastRestore -ge $result.RestoreThreshold) {
                                $statusDetails += "The restore has not been executed in the last $($result.RestoreThreshold) minutes"
                            }
                        }
                    } else {
                        $statusDetails += "All OK"
                    }


                    # Check the time for the backup, copy and restore
                    if ($result.TimeSinceLastBackup -eq [DBNull]::Value) {
                        $lastBackup = "N/A"
                    } else {
                        $lastBackup = (Get-Date).AddMinutes(- $result.TimeSinceLastBackup)
                    }

                    if ($result.TimeSinceLastCopy -eq [DBNull]::Value) {
                        $lastCopy = "N/A"
                    } else {
                        $lastCopy = (Get-Date).AddMinutes(- $result.TimeSinceLastCopy)
                    }

                    if ($result.TimeSinceLastRestore -eq [DBNull]::Value) {
                        $lastRestore = "N/A"
                    } else {
                        $lastRestore = (Get-Date).AddMinutes(- $result.TimeSinceLastRestore)
                    }
                }

                # Set up the custom object
                $object = [PSCustomObject]@{
                    ComputerName          = $server.ComputerName
                    InstanceName          = $server.ServiceName
                    SqlInstance           = $server.DomainInstanceName
                    Database              = $result.DatabaseName
                    InstanceType          = switch ($result.IsPrimary) { $true { "Primary Instance" } $false { "Secondary Instance" } }
                    TimeSinceLastBackup   = $lastBackup
                    LastBackupFile        = $result.LastBackupFile
                    BackupThreshold       = $result.BackupThreshold
                    IsBackupAlertEnabled  = $result.IsBackupAlertEnabled
                    TimeSinceLastCopy     = $lastCopy
                    LastCopiedFile        = $result.LastCopiedFile
                    TimeSinceLastRestore  = $lastRestore
                    LastRestoredFile      = $result.LastRestoredFile
                    LastRestoredLatency   = $result.LastRestoredLatency
                    RestoreThreshold      = $result.RestoreThreshold
                    IsRestoreAlertEnabled = $result.IsRestoreAlertEnabled
                    Status                = $statusDetails -join ","
                }

                if ($Simple) {
                    $object | Select-DefaultView -Property SqlInstance, Database, InstanceType, Status
                } else {
                    $object
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias Test-DbaLogShippingStatus
    }
}

tools\dbatools\functions\Test-DbaDbOwner.ps1

function Test-DbaDbOwner {
    <#
    .SYNOPSIS
        Checks database owners against a login to validate which databases do not match that owner.

    .DESCRIPTION
        This function will check all databases on an instance against a SQL login to validate if that
        login owns those databases or not. By default, the function will check against 'sa' for
        ownership, but the user can pass a specific login if they use something else.

        Best Practice reference: http://weblogs.sqlteam.com/dang/archive/2008/01/13/Database-Owner-Troubles.aspx

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        Specifies the database(s) to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        Specifies the database(s) to exclude from processing. Options for this list are auto-populated from the server.

    .PARAMETER TargetLogin
        Specifies the login that you wish check for ownership. This defaults to 'sa' or the sysadmin name if sa was renamed. This must be a valid security principal which exists on the target server.

    .PARAMETER Detailed
        Will be deprecated in 1.0.0 release.

    .PARAMETER InputObject
        Enables piped input from Get-DbaDatabase.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Database, Owner, DbOwner
        Author: Michael Fal (@Mike_Fal), http://mikefal.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Test-DbaDbOwner

    .EXAMPLE
        PS C:\> Test-DbaDbOwner -SqlInstance localhost

        Returns all databases where the owner does not match 'sa'.

    .EXAMPLE
        PS C:\> Test-DbaDbOwner -SqlInstance localhost -TargetLogin 'DOMAIN\account'

        Returns all databases where the owner does not match 'DOMAIN\account'.

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [string]$TargetLogin,
        [Switch]$Detailed,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Database[]]$InputObject,
        [Switch]$EnableException
    )

    begin {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Parameter "Detailed"
    }
    process {
        if ($SqlInstance) {
            $InputObject += Get-DbaDatabase -SqlInstance $SqlInstance -SqlCredential $SqlCredential -Database $Database -ExcludeDatabase $ExcludeDatabase | Where-Object IsAccessible
        }

        #for each database, create custom object for return set.
        foreach ($db in $InputObject) {
            $server = $db.Parent

            # dynamic sa name for orgs who have changed their sa name
            if (Test-Bound -ParameterName TargetLogin -Not) {
                $TargetLogin = ($server.logins | Where-Object {
                        $_.id -eq 1
                    }).Name
            }

            #Validate login
            if (($server.Logins.Name) -notmatch [Regex]::Escape($TargetLogin)) {
                Write-Message -Level Verbose -Message "$TargetLogin is not a login on $instance" -Target $instance
            }

            if ($db.IsAccessible -eq $false) {
                Stop-Function -Message "The database $db is not accessible. Skipping database." -Continue -Target $db
            }

            Write-Message -Level Verbose -Message "Checking $db"
            [pscustomobject]@{
                ComputerName = $server.ComputerName
                InstanceName = $server.ServiceName
                SqlInstance  = $server.DomainInstanceName
                Server       = $server.DomainInstanceName
                Database     = $db.Name
                DBState      = $db.Status
                CurrentOwner = $db.Owner
                TargetOwner  = $TargetLogin
                OwnerMatch   = ($db.owner -eq $TargetLogin)
            } | Select-DefaultView -ExcludeProperty Server
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Test-DbaDatabaseOwner
    }
}

tools\dbatools\functions\Test-DbaDbRecoveryModel.ps1

function Test-DbaDbRecoveryModel {
    <#
    .SYNOPSIS
        Find if database is really a specific recovery model or not.

    .DESCRIPTION
        When you switch a database into FULL recovery model, it will behave like a SIMPLE recovery model until a full backup is taken in order to begin a log backup chain.

        However, you may also desire to validate if a database is SIMPLE or BULK LOGGED on an instance.

        Inspired by Paul Randal's post (http://www.sqlskills.com/blogs/paul/new-script-is-that-database-really-in-the-full-recovery-mode/)

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        Specifies the database(s) to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        Specifies the database(s) to exclude from processing. Options for this list are auto-populated from the server.

    .PARAMETER RecoveryModel
        Specifies the type of recovery model you wish to test. By default it will test for FULL Recovery Model.

    .PARAMETER Detailed
        Output all properties, will be deprecated in 1.0.0 release.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: DisasterRecovery, Backup
        Author: Claudio Silva (@ClaudioESSilva)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: GNU GPL v3 https://opensource.org/licenses/GPL-3.0

    .LINK
        https://dbatools.io/Test-DbaDbRecoveryModel

    .EXAMPLE
        PS C:\> Test-DbaDbRecoveryModel -SqlInstance sql2005

        Shows all databases where the configured recovery model is FULL and indicates whether or not they are really in FULL recovery model.

    .EXAMPLE
        PS C:\> Test-DbaDbRecoveryModel -SqlInstance . | Where-Object {$_.ActualRecoveryModel -ne "FULL"}

        Only shows the databases that are functionally in 'simple' mode.

    .EXAMPLE
        PS C:\> Test-DbaDbRecoveryModel -SqlInstance sql2008 -RecoveryModel Bulk_Logged | Sort-Object Server  -Descending

        Shows all databases where the configured recovery model is BULK_LOGGED and sort them by server name descending

    .EXAMPLE
        PS C:\> Test-DbaDbRecoveryModel -SqlInstance localhost | Select-Object -Property *

        Shows all of the properties for the databases that have Full Recovery Model

       #>
    [CmdletBinding()]
    [OutputType("System.Collections.ArrayList")]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [PSCredential]$SqlCredential,
        [validateSet("Full", "Simple", "Bulk_Logged")]
        [object]$RecoveryModel,
        [switch]$Detailed,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {
        Test-DbaDeprecation -DeprecatedOn 1.0.0 -Parameter Detailed
        Test-DbaDeprecation -DeprecatedOn 1.0.0 -Alias Test-DbaFullRecoveryModel

        if (Test-Bound -ParameterName RecoveryModel -Not) {
            $RecoveryModel = "Full"
        }

        switch ($RecoveryModel) {
            "Full" {$recoveryCode = 1}
            "Bulk_Logged" {$recoveryCode = 2}
            "Simple" {$recoveryCode = 3}
        }

        $sqlRecoveryModel = "SELECT  SERVERPROPERTY('MachineName') AS ComputerName,
                ISNULL(SERVERPROPERTY('InstanceName'), 'MSSQLSERVER') AS InstanceName,
                SERVERPROPERTY('ServerName') AS SqlInstance
                        , d.[name] AS [Database]
                        , d.recovery_model AS RecoveryModel
                        , d.recovery_model_desc AS RecoveryModelDesc
                        , CASE
                            WHEN d.recovery_model = 1 AND drs.last_log_backup_lsn IS NOT NULL THEN 1
                            ELSE 0
                           END AS IsReallyInFullRecoveryModel
                  FROM sys.databases AS D
                    INNER JOIN sys.database_recovery_status AS drs
                       ON D.database_id = drs.database_id
                  WHERE d.recovery_model = $recoveryCode"

        if ($Database) {
            $dblist = $Database -join "','"
            $databasefilter += "AND d.[name] in ('$dblist')"
        }
        if ($ExcludeDatabase) {
            $dblist = $ExcludeDatabase -join "','"
            $databasefilter += "AND d.[name] NOT IN ('$dblist')"
        }

        $sql = "$sqlRecoveryModel $databasefilter"

        Write-Message -Level Debug -Message $sql
    }
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            try {
                $results = $server.Query($sql)

                if (-not $results) {
                    Write-Message -Level Verbose -Message "Server '$instance' does not have any databases in the $RecoveryModel recovery model."
                }

                foreach ($row in $results) {
                    if (!([bool]$row.IsReallyInFullRecoveryModel) -and $RecoveryModel -eq 'Full') {
                        $ActualRecoveryModel = "SIMPLE"
                    } else {
                        $ActualRecoveryModel = "$($RecoveryModel.ToString().ToUpper())"
                    }

                    [PSCustomObject]@{
                        ComputerName            = $row.ComputerName
                        InstanceName            = $row.InstanceName
                        SqlInstance             = $row.SqlInstance
                        Database                = $row.Database
                        ConfiguredRecoveryModel = $row.RecoveryModelDesc
                        ActualRecoveryModel     = $ActualRecoveryModel
                    } | Select-DefaultView -Property ComputerName, InstanceName, SqlInstance, Database, ConfiguredRecoveryModel, ActualRecoveryModel
                }
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias Test-DbaRecoveryModel
    }
}

tools\dbatools\functions\Test-DbaDbVirtualLogFile.ps1

#ValidationTags#CodeStyle,Messaging,FlowControl,Pipeline#
function Test-DbaDbVirtualLogFile {
    <#
    .SYNOPSIS
        Returns calculations on the database virtual log files for database on a SQL instance.

    .DESCRIPTION
        Having a transaction log file with too many virtual log files (VLFs) can hurt database performance.

        Too many VLFs can cause transaction log backups to slow down and can also slow down database recovery and, in extreme cases, even affect insert/update/delete performance.

        References:
        http://www.sqlskills.com/blogs/kimberly/transaction-log-vlfs-too-many-or-too-few/
        http://blogs.msdn.com/b/saponsqlserver/archive/2012/02/22/too-many-virtual-log-files-vlfs-can-cause-slow-database-recovery.aspx

        If you've got a high number of VLFs, you can use Expand-SqlTLogResponsibly to reduce the number.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        Specifies the database(s) to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        Specifies the database(s) to exclude from processing. Options for this list are auto-populated from the server.

    .PARAMETER IncludeSystemDBs
        If this switch is enabled, system database information will be displayed.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: VLF, Database
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Test-DbaDbVirtualLogFile

    .EXAMPLE
        PS C:\> Test-DbaDbVirtualLogFile -SqlInstance sqlcluster

        Returns all user database virtual log file counts for the sqlcluster instance.

    .EXAMPLE
        PS C:\> Test-DbaDbVirtualLogFile -SqlInstance sqlserver | Where-Object {$_.Count -ge 50}

        Returns user databases that have 50 or more VLFs.

    .EXAMPLE
        PS C:\> @('sqlserver','sqlcluster') | Test-DbaDbVirtualLogFile

        Returns all VLF information for the sqlserver and sqlcluster SQL Server instances. Processes data via the pipeline.

    .EXAMPLE
        PS C:\> Test-DbaDbVirtualLogFile -SqlInstance sqlcluster -Database db1, db2

        Returns VLF counts for the db1 and db2 databases on sqlcluster.

    #>
    [CmdletBinding()]
    [OutputType([System.Collections.ArrayList])]
    param ([parameter(ValueFromPipeline, Mandatory)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [switch]$IncludeSystemDBs,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $dbs = $server.Databases
            if ($Database) {
                $dbs = $dbs | Where-Object Name -in $Database
            }
            if ($ExcludeDatabase) {
                $dbs = $dbs | Where-Object Name -NotIn $ExcludeDatabase
            }

            if (!$IncludeSystemDBs) {
                $dbs = $dbs | Where-Object IsSystemObject -eq $false
            }

            foreach ($db in $dbs) {
                try {
                    $data = Get-DbaDbVirtualLogFile -SqlInstance $server -Database $db.Name
                    $logFile = Get-DbaDbFile -SqlInstance $server -Database $db.Name | Where-Object Type -eq 1

                    $active = $data | Where-Object Status -eq 2
                    $inactive = $data | Where-Object Status -eq 0

                    [PSCustomObject]@{
                        ComputerName      = $server.ComputerName
                        InstanceName      = $server.ServiceName
                        SqlInstance       = $server.DomainInstanceName
                        Database          = $db.name
                        Total             = $data.Count
                        TotalCount        = $data.Count
                        Inactive          = if ($inactive -and $null -eq $inactive.Count) {1} else {$inactive.Count}
                        Active            = if ($active -and $null -eq $active.Count) {1} else {$active.Count}
                        LogFileName       = $logFile.LogicalName -join ","
                        LogFileGrowth     = $logFile.Growth -join ","
                        LogFileGrowthType = $logFile.GrowthType -join ","
                    } | Select-DefaultView -Property ComputerName, InstanceName, SqlInstance, Database, Total
                } catch {
                    Stop-Function -Message "Unable to query $($db.name) on $instance." -ErrorRecord $_ -Target $db -Continue
                }
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Test-DbaVirtualLogFile
    }
}

tools\dbatools\functions\Test-DbaDeprecatedFeature.ps1

function Test-DbaDeprecatedFeature {
    <#
    .SYNOPSIS
        Displays information relating to deprecated features for SQL Server 2005 and above.

    .DESCRIPTION
        Displays information relating to deprecated features for SQL Server 2005 and above.

    .PARAMETER SqlInstance
        The target SQL Server instance

    .PARAMETER SqlCredential
        Login to the target instance using alternate Windows or SQL Login Authentication. Accepts credential objects (Get-Credential).

    .PARAMETER Database
        The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto-populated from the server

    .PARAMETER InputObject
        A collection of databases (such as returned by Get-DbaDatabase), to be tested.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Deprecated
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Test-DbaDeprecatedFeature

    .EXAMPLE
        PS C:\> Get-DbaDatabase -SqlInstance sql2008 -Database testdb, db2 | Test-DbaDeprecatedFeature

        Check deprecated features on server sql2008 for only the testdb and db2 databases

    .EXAMPLE
        PS C:\> Get-DbaDatabase -SqlInstance sql2008 -Database testdb, db2 | Test-DbaDeprecatedFeature | Select *

        See the object definition in the output as well

    .EXAMPLE
        PS C:\> Test-DbaDeprecatedFeature -SqlInstance sql2008, sqlserver2012

        Check deprecated features for all databases on the servers sql2008 and sqlserver2012.

    .EXAMPLE
        PS C:\> Test-DbaDeprecatedFeature -SqlInstance sql2008 -Database TestDB

        Check deprecated features on server sql2008 for only the TestDB database

    #>
    [CmdletBinding()]
    param (
        [Alias("ServerInstance", "SqlServer", "SqlServers")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$Database,
        [string[]]$ExcludeDatabase,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Database[]]$InputObject,
        [switch]$EnableException
    )

    begin {
        $sql = "SELECT  SERVERPROPERTY('MachineName') AS ComputerName,
            ISNULL(SERVERPROPERTY('InstanceName'), 'MSSQLSERVER') AS InstanceName,
            SERVERPROPERTY('ServerName') AS SqlInstance, object_id as ID, Name, type_desc as Type, Object_Definition (object_id) as Definition FROM sys.all_objects
            Where Type = 'P' AND is_ms_shipped = 0"
    }

    process {
        foreach ($instance in $SqlInstance) {
            $InputObject += Get-DbaDatabase -SqlInstance $SqlInstance -SqlCredential $SqlCredential -Database $Database -ExcludeDatabase $ExcludeDatabase
        }
        foreach ($db in $InputObject) {
            Write-Message -Level Verbose -Message "Processing $db on $($db.Parent.Name)"

            if ($db.IsAccessible -eq $false) {
                Stop-Function -Message "The database $db is not accessible. Skipping database." -Continue
            }

            $deps = $db.Query("select instance_name as dep from sys.dm_os_performance_counters where object_name like '%Deprecated%'")
            try {
                $results = $db.Query($sql)
                foreach ($dep in $deps) {
                    $escaped = [Regex]::Escape("$($dep.dep)".Trim())
                    $matchedep = $results | Where-Object Definition -match $escaped
                    if ($matchedep) {
                        $matchedep | Add-Member -NotePropertyName DeprecatedFeature -NotePropertyValue $dep.dep.ToString().Trim() -PassThru -Force |
                            Select-DefaultView -Property ComputerName, InstanceName, SqlInstance, DeprecatedFeature, ID, Name, Type
                    }
                }
            } catch {
                Stop-Function -Message "Failure" -ErrorRecord $_ -Continue
            }
        }
    }
}

tools\dbatools\functions\Test-DbaDiskAlignment.ps1

function Test-DbaDiskAlignment {
    <#
    .SYNOPSIS
        Verifies that your non-dynamic disks are aligned according to physical constraints.

    .DESCRIPTION
        Returns $true or $false by default for one server. Returns Server name and IsBestPractice for more than one server.

        Please refer to your storage vendor best practices before following any advice below.

        By default issues with disk alignment should be resolved by a new installation of Windows Server 2008, Windows Vista, or later operating systems, but verifying disk alignment continues to be recommended as a best practice.
        While some versions of Windows use different starting alignments, if you are starting anew 1MB is generally the best practice offset for current operating systems (because it ensures that the partition offset % common stripe unit sizes == 0 )

        Caveats:
        * Dynamic drives (or those provisioned via third party software) may or may not have accurate results when polled by any of the built in tools, see your vendor for details.
        * Windows does not have a reliable way to determine stripe unit Sizes. These values are obtained from vendor disk management software or from your SAN administrator.
        * System drives in versions previous to Windows Server 2008 cannot be aligned, but it is generally not recommended to place SQL Server databases on system drives.

    .PARAMETER ComputerName
        The target computer or computers.

    .PARAMETER Credential
        Specifies an alternate Windows account to use when enumerating drives on the server. May require Administrator privileges. To use:

        $cred = Get-Credential, then pass $cred object to the -Credential parameter.

    .PARAMETER SQLCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER NoSqlCheck
        If this switch is enabled, the disk(s) will not be checked for SQL Server data or log files.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Storage
        Author: Constantine Kokkinos (@mobileck), https://constantinekokkinos.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        The preferred way to determine if your disks are aligned (or not) is to calculate:
        1. Partition offset - stripe unit size
        2. Stripe unit size - File allocation unit size

        References:
        - Disk Partition Alignment Best Practices for SQL Server - https://technet.microsoft.com/en-us/library/dd758814(v=sql.100).aspx
        - Getting Partition Offset information with Powershell - http://sqlblog.com/blogs/jonathan_kehayias/archive/2010/03/01/getting-partition-Offset-information-with-powershell.aspx
        Thanks to Jonathan Kehayias!
        - Decree: Set your partition Offset and block Size and make SQL Server faster - http://www.midnightdba.com/Jen/2014/04/decree-set-your-partition-Offset-and-block-Size-make-sql-server-faster/
        Thanks to Jen McCown!
        - Disk Performance Hands On - http://www.kendalvandyke.com/2009/02/disk-performance-hands-on-series-recap.html
        Thanks to Kendal Van Dyke!
        - Get WMI Disk Information - http://powershell.com/cs/media/p/7937.aspx
        Thanks to jbruns2010!

    .LINK
        https://dbatools.io/Test-DbaDiskAlignment

    .EXAMPLE
        PS C:\> Test-DbaDiskAlignment -ComputerName sqlserver2014a

        Tests the disk alignment of a single server named sqlserver2014a

    .EXAMPLE
        PS C:\> Test-DbaDiskAlignment -ComputerName sqlserver2014a, sqlserver2014b, sqlserver2014c

        Tests the disk alignment of multiple servers

    #>
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "SqlInstance")]
        [DbaInstanceParameter[]]$ComputerName,
        [System.Management.Automation.PSCredential]$Credential,
        [System.Management.Automation.PSCredential]$SqlCredential,
        [switch]$NoSqlCheck,
        [switch]$EnableException
    )
    begin {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Parameter 'Detailed'

        $sessionoption = New-CimSessionOption -Protocol DCom

        function Get-DiskAlignment {
            [CmdletBinding()]
            param (
                $CimSession,
                [string]$FunctionName = (Get-PSCallStack)[0].Command,
                [bool]$NoSqlCheck,
                [string]$ComputerName,
                [System.Management.Automation.PSCredential]$SqlCredential,
                [bool]$EnableException = $EnableException
            )

            $SqlInstances = @()
            $offsets = @()

            #region Retrieving partition/disk Information
            try {
                Write-Message -Level Verbose -Message "Gathering information about first partition on each disk for $ComputerName." -FunctionName $FunctionName

                try {
                    $partitions = Get-CimInstance -CimSession $CimSession -ClassName Win32_DiskPartition -Namespace "root\cimv2" -ErrorAction Stop
                } catch {
                    if ($_.Exception -match "namespace") {
                        Stop-Function -Message "Can't get disk alignment info for $ComputerName. Unsupported operating system." -InnerErrorRecord $_ -Target $ComputerName -FunctionName $FunctionName
                        return
                    } else {
                        Stop-Function -Message "Can't get disk alignment info for $ComputerName. Check logs for more details." -InnerErrorRecord $_ -Target $ComputerName -FunctionName $FunctionName
                        return
                    }
                }


                $disks = @()
                $disks += $($partitions | ForEach-Object {
                        Get-CimInstance -CimSession $CimSession -Query "ASSOCIATORS OF {Win32_DiskPartition.DeviceID=""$($_.DeviceID.Replace("\", "\\"))""} WHERE AssocClass = Win32_LogicalDiskToPartition" |
                            Add-Member -Force -MemberType noteproperty -Name BlockSize -Value $_.BlockSize -PassThru |
                            Add-Member -Force -MemberType noteproperty -Name BootPartition -Value $_.BootPartition -PassThru |
                            Add-Member -Force -MemberType noteproperty -Name DiskIndex -Value $_.DiskIndex -PassThru |
                            Add-Member -Force -MemberType noteproperty -Name Index -Value $_.Index -PassThru |
                            Add-Member -Force -MemberType noteproperty -Name NumberOfBlocks -Value $_.NumberOfBlocks -PassThru |
                            Add-Member -Force -MemberType noteproperty -Name StartingOffset -Value $_.StartingOffset -PassThru |
                            Add-Member -Force -MemberType noteproperty -Name Type -Value $_.Type -PassThru
                    } |
                        Select-Object BlockSize, BootPartition, Description, DiskIndex, Index, Name, NumberOfBlocks, Size, StartingOffset, Type
                )
                Write-Message -Level Verbose -Message "Gathered CIM information." -FunctionName $FunctionName
            } catch {
                Stop-Function -Message "Can't connect to CIM on $ComputerName." -FunctionName $FunctionName -InnerErrorRecord $_
                return
            }
            #endregion Retrieving partition Information

            #region Retrieving Instances
            if (-not $NoSqlCheck) {
                Write-Message -Level Verbose -Message "Checking for SQL Services." -FunctionName $FunctionName
                $sqlservices = Get-CimInstance -ClassName Win32_Service -CimSession $CimSession | Where-Object DisplayName -like 'SQL Server (*'
                foreach ($service in $sqlservices) {
                    $instance = $service.DisplayName.Replace('SQL Server (', '')
                    $instance = $instance.TrimEnd(')')

                    $instancename = $instance.Replace("MSSQLSERVER", "Default")
                    Write-Message -Level Verbose -Message "Found instance $instancename" -FunctionName $FunctionName
                    if ($instance -eq 'MSSQLSERVER') {
                        $SqlInstances += $ComputerName
                    } else {
                        $SqlInstances += "$ComputerName\$instance"
                    }
                }
                $sqlcount = $SqlInstances.Count
                Write-Message -Level Verbose -Message "$sqlcount instance(s) found." -FunctionName $FunctionName
            }
            #endregion Retrieving Instances

            #region Offsets
            foreach ($disk in $disks) {
                if (!$disk.name.StartsWith("\\")) {
                    $diskname = $disk.Name
                    if ($NoSqlCheck -eq $false) {
                        $sqldisk = $false

                        foreach ($SqlInstance in $SqlInstances) {
                            try {
                                if ($null -ne $SqlCredential) {
                                    $smoserver = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential
                                } else {
                                    $smoserver = Connect-SqlInstance -SqlInstance $SqlInstance # win auth
                                }
                                $sql = "Select count(*) as Count from sys.master_files where physical_name like '$diskname%'"
                                Write-Message -Level Verbose -Message "Query is: $sql" -FunctionName $FunctionName
                                Write-Message -Level Verbose -Message "SQL Server is: $SqlInstance." -FunctionName $FunctionName
                                $sqlcount = $smoserver.Databases['master'].ExecuteWithResults($sql).Tables[0].Count
                                if ($sqlcount -gt 0) {
                                    $sqldisk = $true
                                    break
                                }
                            } catch {
                                Stop-Function -Message "Can't connect to $ComputerName ($SqlInstance)." -FunctionName $FunctionName -InnerErrorRecord $_
                                return
                            }
                        }
                    }

                    if ($NoSqlCheck -eq $false) {
                        if ($sqldisk -eq $true) {
                            $offsets += $disk
                        }
                    } else {
                        $offsets += $disk
                    }
                }
            }
            #endregion Offsets

            #region Processing results
            Write-Message -Level Verbose -Message "Checking $($offsets.count) partitions." -FunctionName $FunctionName
            foreach ($partition in $offsets) {
                # Unfortunately "Windows does not have a reliable way to determine stripe unit Sizes. These values are obtained from vendor disk management software or from your SAN administrator."
                # And this is the #1 most impactful issue with disk alignment :D
                # What we can do is test common stripe unit Sizes against the Offset we have and give advice if the Offset they chose would work in those scenarios
                $offset = $partition.StartingOffset / 1kb
                $type = $partition.Type
                $stripe_units = @(64, 128, 256, 512, 1024) # still wish I had a better way to verify this or someone to pat my back and say its alright.

                # testing dynamic disks, everyone states that info from dynamic disks is not to be trusted, so throw a warning.
                Write-Message -Level Verbose -Message "Testing for dynamic disks." -FunctionName $FunctionName
                if ($type -eq "Logical Disk Manager") {
                    $IsDynamicDisk = $true
                    Write-Message -Level Warning -Message "Disk is dynamic, all Offset calculations should be suspect, please refer to your vendor to determine actual Offset calculations." -FunctionName $FunctionName
                } else {
                    $IsDynamicDisk = $false
                }

                Write-Message -Level Verbose -Message "Checking for best practices offsets." -FunctionName $FunctionName

                if ($offset -ne 64 -and $offset -ne 128 -and $offset -ne 256 -and $offset -ne 512 -and $offset -ne 1024) {
                    $IsOffsetBestPractice = $false
                } else {
                    $IsOffsetBestPractice = $true
                }

                # as we can't tell the actual size of the file strip unit, just check all the sizes I know about
                foreach ($size in $stripe_units) {
                    if ($offset % $size -eq 0) {
                        # for proper alignment we really only need to know that your offset divided by your stripe unit size has a remainder of 0
                        $OffsetModuloKB = "$($offset % $size)"
                        $isBestPractice = $true
                    } else {
                        $OffsetModuloKB = "$($offset % $size)"
                        $isBestPractice = $false
                    }

                    [PSCustomObject]@{
                        ComputerName            = $ogcomputer
                        Name                    = "$($partition.Name)"
                        PartitonSize            = [dbasize]($($partition.Size / 1MB) * 1024 * 1024)
                        PartitionType           = $partition.Type
                        TestingStripeSize       = [dbasize]($size * 1024)
                        OffsetModuluCalculation = [dbasize]($OffsetModuloKB * 1024)
                        StartingOffset          = [dbasize]($offset * 1024)
                        IsOffsetBestPractice    = $IsOffsetBestPractice
                        IsBestPractice          = $isBestPractice
                        NumberOfBlocks          = $partition.NumberOfBlocks
                        BootPartition           = $partition.BootPartition
                        PartitionBlockSize      = $partition.BlockSize
                        IsDynamicDisk           = $IsDynamicDisk
                    }
                }
            }
        }
    }

    process {
        # uses cim commands
        
        
        foreach ($computer in $ComputerName) {
            $computer = $ogcomputer = $computer.ComputerName
            Write-Message -Level VeryVerbose -Message "Processing: $computer."

            $computer = Resolve-DbaNetworkName -ComputerName $computer -Credential $Credential
            $Computer = $computer.FullComputerName

            if (-not $Computer) {
                Stop-Function -Message "Couldn't resolve hostname. Skipping." -Continue
            }

            #region Connecting to server via Cim
            Write-Message -Level Verbose -Message "Creating CimSession on $computer over WSMan"

            if (-not $Credential) {
                $cimsession = New-CimSession -ComputerName $Computer -ErrorAction Ignore
            } else {
                $cimsession = New-CimSession -ComputerName $Computer -ErrorAction Ignore -Credential $Credential
            }

            if ($null -eq $cimsession.id) {
                Write-Message -Level Verbose -Message "Creating CimSession on $computer over WSMan failed. Creating CimSession on $computer over DCOM."

                if (!$Credential) {
                    $cimsession = New-CimSession -ComputerName $Computer -SessionOption $sessionoption -ErrorAction Ignore
                } else {
                    $cimsession = New-CimSession -ComputerName $Computer -SessionOption $sessionoption -ErrorAction Ignore -Credential $Credential
                }
            }

            if ($null -eq $cimsession.id) {
                Stop-Function -Message "Can't create CimSession on $computer." -Target $Computer -Continue
            }
            #endregion Connecting to server via Cim

            Write-Message -Level Verbose -Message "Getting Power Plan information from $Computer."


            try {
                Get-DiskAlignment -CimSession $cimsession -NoSqlCheck $NoSqlCheck -ComputerName $Computer -ErrorAction Stop
            } catch {
                Stop-Function -Message "Failed to process $($Computer): $($_.Exception.Message)" -Continue -InnerErrorRecord $_ -Target $Computer
            }
        }
    }
}

tools\dbatools\functions\Test-DbaDiskAllocation.ps1

function Test-DbaDiskAllocation {
    <#
    .SYNOPSIS
        Checks all disks on a computer to see if they are formatted with allocation units of 64KB.

    .DESCRIPTION
        Checks all disks on a computer for disk allocation units that match best practice recommendations. If one server is checked, only $true or $false is returned. If multiple servers are checked, each server's name and an IsBestPractice field are returned.

        References:
        https://technet.microsoft.com/en-us/library/dd758814(v=sql.100).aspx - "The performance question here is usually not one of correlation per the formula, but whether the cluster size has been explicitly defined at 64 KB, which is a best practice for SQL Server."

    .PARAMETER ComputerName
        The server(s) to check disk configuration on.

    .PARAMETER NoSqlCheck
        If this switch is enabled, the disk(s) will not be checked for SQL Server data or log files.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Credential
        Specifies an alternate Windows account to use when enumerating drives on the server. May require Administrator privileges. To use:

        $cred = Get-Credential, then pass $cred object to the -Credential parameter.

    .PARAMETER Detailed
        Output all properties, will be deprecated in 1.0.0 release.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: CIM, Storage
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Test-DbaDiskAllocation

    .EXAMPLE
        PS C:\> Test-DbaDiskAllocation -ComputerName sqlserver2014a

        Scans all disks on server sqlserver2014a for best practice allocation unit size.

    .EXAMPLE
        PS C:\> Test-DbaDiskAllocation -ComputerName sqlserver2014 | Select-Output *

        Scans all disks on server sqlserver2014a for allocation unit size and returns detailed results for each.

    .EXAMPLE
        PS C:\> Test-DbaDiskAllocation -ComputerName sqlserver2014a -NoSqlCheck

        Scans all disks not hosting SQL Server data or log files on server sqlserver2014a for best practice allocation unit size.

    #>
    [CmdletBinding(SupportsShouldProcess)]
    [OutputType("System.Collections.ArrayList", "System.Boolean")]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "SqlInstance")]
        [object[]]$ComputerName,
        [switch]$NoSqlCheck,
        [PSCredential]$SqlCredential,
        [PSCredential]$Credential,
        [switch]$Detailed,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        Test-DbaDeprecation -DeprecatedOn 1.0.0 -Parameter Detailed

        $sessionoptions = New-CimSessionOption -Protocol DCOM

        function Get-AllDiskAllocation {
            $alldisks = @()
            $SqlInstances = @()

            try {
                Write-Message -Level Verbose -Message "Getting disk information from $computer."

                # $query = "Select Label, BlockSize, Name from Win32_Volume WHERE FileSystem='NTFS'"
                # $disks = Get-WmiObject -ComputerName $ipaddr -Query $query | Sort-Object -Property Name
                $disks = Get-CimInstance -CimSession $CIMsession -ClassName win32_volume -Filter "FileSystem='NTFS'" -ErrorAction Stop | Sort-Object -Property Name
            } catch {
                Stop-Function -Message "Can't connect to WMI on $computer."
                return
            }

            if ($NoSqlCheck -eq $false) {
                Write-Message -Level Verbose -Message "Checking for SQL Services"
                $sqlservices = Get-Service -ComputerName $ipaddr | Where-Object { $_.DisplayName -like 'SQL Server (*' }
                foreach ($service in $sqlservices) {
                    $instance = $service.DisplayName.Replace('SQL Server (', '')
                    $instance = $instance.TrimEnd(')')

                    $instancename = $instance.Replace("MSSQLSERVER", "Default")
                    Write-Message -Level Verbose -Message "Found instance $instancename."

                    if ($instance -eq 'MSSQLSERVER') {
                        $SqlInstances += $ipaddr
                    } else {
                        $SqlInstances += "$ipaddr\$instance"
                    }
                }
                $sqlcount = $SqlInstances.Count

                Write-Message -Level Verbose -Message "$sqlcount instance(s) found."
            }

            foreach ($disk in $disks) {
                if (!$disk.name.StartsWith("\\")) {
                    $diskname = $disk.Name

                    if ($NoSqlCheck -eq $false) {
                        $sqldisk = $false

                        foreach ($SqlInstance in $SqlInstances) {
                            try {
                                $smoserver = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential
                                $sql = "Select count(*) as Count from sys.master_files where physical_name like '$diskname%'"
                                $sqlcount = $smoserver.Databases['master'].ExecuteWithResults($sql).Tables[0].Count
                                if ($sqlcount -gt 0) {
                                    $sqldisk = $true
                                    break
                                }
                            } catch {
                                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
                                continue
                            }
                        }
                    }

                    if ($disk.BlockSize -eq 65536) {
                        $IsBestPractice = $true
                    } else {
                        $IsBestPractice = $false
                    }

                    $windowsdrive = "$env:SystemDrive\"

                    if ($diskname -eq $windowsdrive) {
                        $IsBestPractice = $false
                    }

                    if ($NoSqlCheck -eq $false) {
                        $alldisks += [PSCustomObject]@{
                            Server         = $computer
                            Name           = $diskname
                            Label          = $disk.Label
                            BlockSize      = $disk.BlockSize
                            IsSqlDisk      = $sqldisk
                            IsBestPractice = $IsBestPractice
                        }
                    } else {
                        $alldisks += [PSCustomObject]@{
                            Server         = $computer
                            Name           = $diskname
                            Label          = $disk.Label
                            BlockSize      = $disk.BlockSize
                            IsBestPractice = $IsBestPractice
                        }
                    }
                }
            }
            return $alldisks
        }
    }

    process {
        # uses cim commands
        
        
        foreach ($computer in $ComputerName) {

            $computer = Resolve-DbaNetworkName -ComputerName $computer -Credential $Credential
            $ipaddr = $computer.IpAddress
            $Computer = $computer.FullComputerName

            if (!$Computer) {
                Stop-Function -Message "Couldn't resolve hostname. Skipping." -Continue
            }

            Write-Message -Level Verbose -Message "Creating CimSession on $computer over WSMan."

            if (!$Credential) {
                $cimsession = New-CimSession -ComputerName $Computer -ErrorAction SilentlyContinue
            } else {
                $cimsession = New-CimSession -ComputerName $Computer -ErrorAction SilentlyContinue -Credential $Credential
            }

            if ($null -eq $cimsession.id) {
                Write-Message -Level Verbose -Message "Creating CimSession on $computer over WSMan failed. Creating CimSession on $computer over DCOM."

                if (!$Credential) {
                    $cimsession = New-CimSession -ComputerName $Computer -SessionOption $sessionoptions -ErrorAction SilentlyContinue
                } else {
                    $cimsession = New-CimSession -ComputerName $Computer -SessionOption $sessionoptions -ErrorAction SilentlyContinue -Credential $Credential
                }
            }

            if ($null -eq $cimsession.id) {
                Stop-Function -Message "Can't create CimSession on $computer" -Target $Computer
            }

            Write-Message -Level Verbose -Message "Getting Power Plan information from $Computer"

            if ($PScmdlet.ShouldProcess("$computer", "Getting Disk Allocation")) {
                $data = Get-AllDiskAllocation $computer

                if ($data.Count -gt 1) {
                    $data.GetEnumerator()
                } else {
                    $data
                }
            }
        }
    }
}

tools\dbatools\functions\Test-DbaDiskSpeed.ps1

function Test-DbaDiskSpeed {
    <#
    .SYNOPSIS
        Tests how disks are performing.

    .DESCRIPTION
        Tests how disks are performing.

        This command uses a query from Rich Benner which was adapted from David Pless's article:
        https://blogs.msdn.microsoft.com/dpless/2010/12/01/leveraging-sys-dm_io_virtual_file_stats/
        https://github.com/RichBenner/PersonalCode/blob/master/Disk_Speed_Check.sql

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Allows you to login to the SQL Server using alternative credentials.

    .PARAMETER Database
        The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto-populated from the server

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Performance
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Test-DbaDiskSpeed

    .EXAMPLE
        PS C:\> Test-DbaDiskSpeed -SqlInstance sql2008, sqlserver2012

        Tests how disks are performing on sql2008 and sqlserver2012.

    .EXAMPLE
        PS C:\> Test-DbaDiskSpeed -SqlInstance sql2008 -Database tempdb

        Tests how disks storing tempdb files on sql2008 are performing.

    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "SqlServers")]
        [DbaInstance[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [switch]$EnableException
    )

    begin {

        $sql = "SELECT  SERVERPROPERTY('MachineName') AS ComputerName,
        ISNULL(SERVERPROPERTY('InstanceName'), 'MSSQLSERVER') AS InstanceName,
        SERVERPROPERTY('ServerName') AS SqlInstance, db_name(a.database_id) AS [Database]
        , CAST(((a.size_on_disk_bytes/1024)/1024.0)/1024 AS DECIMAL(10,2)) AS [SizeGB]
        , RIGHT(b.physical_name, CHARINDEX('\', REVERSE(b.physical_name)) -1) AS [FileName]
        , a.file_id AS [FileID]
        , CASE WHEN a.file_id = 2 THEN 'Log' ELSE 'Data' END AS [FileType]
        , UPPER(SUBSTRING(b.physical_name, 1, 2)) AS [DiskLocation]
        , a.num_of_reads AS [Reads]
        , CASE WHEN a.num_of_reads < 1 THEN NULL ELSE CAST(a.io_stall_read_ms/(a.num_of_reads) AS INT) END AS [AverageReadStall]
        , CASE
            WHEN CASE WHEN a.num_of_reads < 1 THEN NULL ELSE CAST(a.io_stall_read_ms/(a.num_of_reads) AS INT) END < 10 THEN 'Very Good'
            WHEN CASE WHEN a.num_of_reads < 1 THEN NULL ELSE CAST(a.io_stall_read_ms/(a.num_of_reads) AS INT) END < 20 THEN 'OK'
            WHEN CASE WHEN a.num_of_reads < 1 THEN NULL ELSE CAST(a.io_stall_read_ms/(a.num_of_reads) AS INT) END < 50 THEN 'Slow, Needs Attention'
            WHEN CASE WHEN a.num_of_reads < 1 THEN NULL ELSE CAST(a.io_stall_read_ms/(a.num_of_reads) AS INT) END >= 50 THEN 'Serious I/O Bottleneck'
            END AS [ReadPerformance]
        , a.num_of_writes AS [Writes]
        , CASE WHEN a.num_of_writes < 1 THEN NULL ELSE CAST(a.io_stall_write_ms/a.num_of_writes AS INT) END AS [AverageWriteStall]
        , CASE
            WHEN CASE WHEN a.num_of_writes < 1 THEN NULL ELSE CAST(a.io_stall_write_ms/(a.num_of_writes) AS INT) END < 10 THEN 'Very Good'
            WHEN CASE WHEN a.num_of_writes < 1 THEN NULL ELSE CAST(a.io_stall_write_ms/(a.num_of_writes) AS INT) END < 20 THEN 'OK'
            WHEN CASE WHEN a.num_of_writes < 1 THEN NULL ELSE CAST(a.io_stall_write_ms/(a.num_of_writes) AS INT) END < 50 THEN 'Slow, Needs Attention'
            WHEN CASE WHEN a.num_of_writes < 1 THEN NULL ELSE CAST(a.io_stall_write_ms/(a.num_of_writes) AS INT) END >= 50 THEN 'Serious I/O Bottleneck'
            END AS [WritePerformance]
        FROM sys.dm_io_virtual_file_stats (NULL, NULL) a
        JOIN sys.master_files b
            ON a.file_id = b.file_id
            AND a.database_id = b.database_id"

        if ($Database -or $ExcludeDatabase) {
            if ($database) {
                $where = " where db_name(a.database_id) in ('$($Database -join "'")') "
            }
            if ($ExcludeDatabase) {
                $where = " where db_name(a.database_id) not in ('$($ExcludeDatabase -join "'")') "
            }
            $sql += $where
        }

        $sql += " ORDER BY (a.num_of_reads + a.num_of_writes) DESC"
    }

    process {
        foreach ($instance in $SqlInstance) {

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }
            Write-Message -Level Debug -Message "Executing $sql"
            $server.Query("$sql")
        }
    }
}

tools\dbatools\functions\Test-DbaEndpoint.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Test-DbaEndpoint {
    <#
    .SYNOPSIS
        Performs a simple connectivity test for TCP and SSL enabled endpoints.

    .DESCRIPTION
        Performs a simple connectivity test for TCP and SSL enabled endpoints. Tests if port is accessible, not if endpoint is working.

        Note that if an endpoint does not have a tcp listener port, it will be skipped.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Endpoint
        Test only specific endpoint or endpoints.

    .PARAMETER InputObject
        Enables piping from Get-DbaEndpoint.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Endpoint
        Author: Chrissy LeMaire (@cl), netnerds.net
        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Test-DbaEndpoint

    .EXAMPLE
        PS C:\> Test-DbaEndpoint -SqlInstance localhost

        Tests all endpoints on the local default SQL Server instance.

        Note that if an endpoint does not have a tcp listener port, it will be skipped.

    .EXAMPLE
        PS C:\> Get-DbaEndpoint -SqlInstance localhost, sql2016 -Endpoint Mirror | Test-DbaEndpoint

        Tests all endpoints named Mirroring on sql2016 and localhost.

        Note that if an endpoint does not have a tcp listener port, it will be skipped.

    .EXAMPLE
        PS C:\> Test-DbaEndpoint -SqlInstance localhost, sql2016 -Endpoint Mirror

        Tests all endpoints named Mirroring on sql2016 and localhost.

        Note that if an endpoint does not have a tcp listener port, it will be skipped.

    .EXAMPLE
        PS C:\> Test-DbaEndpoint -SqlInstance localhost -Verbose

        Tests all endpoints on the local default SQL Server instance.

        See all endpoints that were skipped due to not having a tcp listener port.

    #>
    [CmdletBinding()]
    param (
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$Endpoint,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Endpoint[]]$InputObject,
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            $InputObject += Get-DbaEndpoint -SqlInstance $instance -SqlCredential $SqlCredential -Endpoint $Endpoint
        }

        foreach ($end in $InputObject) {
            if (-not $end.Protocol.Tcp.ListenerPort) {
                Write-Message -Level Verbose -Message "$end on $($end.Parent) does not have a tcp listener port"
            } else {
                Write-Message "Connecting to port $($end.Protocol.Tcp.ListenerPort) on $($end.ComputerName) for endpoint $($end.Name)"

                try {
                    $tcp = New-Object System.Net.Sockets.TcpClient
                    $tcp.Connect($end.ComputerName, $end.Protocol.Tcp.ListenerPort)
                    $tcp.Close()
                    $tcp.Dispose()
                    $connect = "Success"
                } catch {
                    $connect = $_
                }

                try {
                    $ssl = $end.Protocol.Tcp.SslPort
                    if ($ssl) {
                        $tcp = New-Object System.Net.Sockets.TcpClient
                        $tcp.Connect($end.ComputerName, $ssl)
                        $tcp.Close()
                        $tcp.Dispose()
                        $sslconnect = "Success"
                    } else {
                        $sslconnect = "None"
                    }
                } catch {
                    $sslconnect = $_
                }

                [pscustomobject]@{
                    ComputerName  = $end.ComputerName
                    InstanceName  = $end.InstanceName
                    SqlInstance   = $end.SqlInstance
                    Endpoint      = $end.Name
                    Port          = $end.Protocol.Tcp.ListenerPort
                    Connection    = $connect
                    SslConnection = $sslconnect
                }
            }
        }
    }
}

tools\dbatools\functions\Test-DbaIdentityUsage.ps1

function Test-DbaIdentityUsage {
    <#
    .SYNOPSIS
        Displays information relating to IDENTITY seed usage.  Works on SQL Server 2008 and above.

    .DESCRIPTION
        IDENTITY seeds have max values based off of their data type.  This module will locate identity columns and report the seed usage.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The database(s) to process - this list is auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto-populated from the server

    .PARAMETER Threshold
        Allows you to specify a minimum % of the seed range being utilized.  This can be used to ignore seeds that have only utilized a small fraction of the range.

    .PARAMETER ExcludeSystem
        Allows you to suppress output on system databases

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Identity, Table, Column
        Author: Brandon Abshire, netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Test-DbaIdentityUsage

    .EXAMPLE
        PS C:\> Test-DbaIdentityUsage -SqlInstance sql2008, sqlserver2012

        Check identity seeds for servers sql2008 and sqlserver2012.

    .EXAMPLE
        PS C:\> Test-DbaIdentityUsage -SqlInstance sql2008 -Database TestDB

        Check identity seeds on server sql2008 for only the TestDB database

    .EXAMPLE
        PS C:\> Test-DbaIdentityUsage -SqlInstance sql2008 -Database TestDB -Threshold 20

        Check identity seeds on server sql2008 for only the TestDB database, limiting results to 20% utilization of seed range or higher

    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "SqlServers")]
        [DbaInstance[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [parameter(Position = 1)]
        [int]$Threshold = 0,
        [parameter(Position = 2)]
        [Alias("ExcludeSystemDb")]
        [switch]$ExcludeSystem,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        Test-DbaDeprecation -DeprecatedOn 1.0.0 -Parameter ExcludeSystem

        $sql = ";WITH CT_DT AS
        (
            SELECT 'tinyint' AS DataType, 0 AS MinValue ,255 AS MaxValue UNION
            SELECT 'smallint' AS DataType, -32768 AS MinValue ,32767 AS MaxValue UNION
            SELECT 'int' AS DataType, -2147483648 AS MinValue ,2147483647 AS MaxValue UNION
            SELECT 'bigint' AS DataType, -9223372036854775808 AS MinValue ,9223372036854775807 AS MaxValue
        ), CTE_1
        AS
        (
          SELECT SCHEMA_NAME(o.schema_id) AS SchemaName,
                 OBJECT_NAME(a.Object_id) as TableName,
                 a.Name as ColumnName,
                 seed_value AS SeedValue,
                 CONVERT(bigint, increment_value) as IncrementValue,

                 CONVERT(bigint, ISNULL(a.last_value, seed_value)) AS LastValue,

                 (CASE
                        WHEN CONVERT(bigint, increment_value) < 0 THEN
                            (CONVERT(bigint, seed_value)
                            - CONVERT(bigint, ISNULL(last_value, seed_value))
                            + (CASE WHEN CONVERT(bigint, seed_value) <> 0 THEN ABS(CONVERT(bigint, increment_value)) ELSE 0 END))
                        ELSE
                            (CONVERT(bigint, ISNULL(last_value, seed_value))
                            - CONVERT(bigint, seed_value)
                            + (CASE WHEN CONVERT(bigint, seed_value) <> 0 THEN ABS(CONVERT(bigint, increment_value)) ELSE 0 END))
                    END) / ABS(CONVERT(bigint, increment_value))  AS NumberOfUses,

                  CAST (
                        (CASE
                            WHEN CONVERT(Numeric(20, 0), increment_value) < 0 THEN
                                ABS(CONVERT(Numeric(20, 0),dt.MinValue)
                                - CONVERT(Numeric(20, 0), seed_value)
                                - (CASE WHEN CONVERT(Numeric(20, 0), seed_value) <> 0 THEN ABS(CONVERT(Numeric(20, 0), increment_value)) ELSE 0 END))
                            ELSE
                                CONVERT(Numeric(20, 0),dt.MaxValue)
                                - CONVERT(Numeric(20, 0), seed_value)
                                + (CASE WHEN CONVERT(Numeric(20, 0), seed_value) <> 0 THEN ABS(CONVERT(Numeric(20, 0), increment_value)) ELSE 0 END)
                        END) / ABS(CONVERT(Numeric(20, 0), increment_value))
                    AS Numeric(20, 0)) AS MaxNumberRows

            FROM sys.identity_columns a
                INNER JOIN sys.objects o
                   ON a.object_id = o.object_id
                INNER JOIN sys.types As b
                     ON a.system_type_id = b.system_type_id
                INNER JOIN CT_DT dt
                     ON b.name = dt.DataType
          WHERE a.seed_value is not null
        ),
        CTE_2
        AS
        (
        SELECT SchemaName, TableName, ColumnName, CONVERT(BIGINT, SeedValue) AS SeedValue, CONVERT(BIGINT, IncrementValue) AS IncrementValue, LastValue, ABS(CONVERT(NUMERIC(20,0),MaxNumberRows)) AS MaxNumberRows, NumberOfUses,
               CONVERT(NUMERIC(18, 2), ((CONVERT(FLOAT, NumberOfUses) / ABS(CONVERT(NUMERIC(20, 0), NULLIF(MaxNumberRows,0))) * 100))) AS [PercentUsed]
          FROM CTE_1
        )
        SELECT DB_NAME() as DatabaseName, SchemaName, TableName, ColumnName, SeedValue, IncrementValue, LastValue, MaxNumberRows, NumberOfUses, [PercentUsed]
          FROM CTE_2"

        if ($Threshold -gt 0) {
            $sql += " WHERE [PercentUsed] >= " + $Threshold + " ORDER BY [PercentUsed] DESC"
        } else {
            $sql += " ORDER BY [PercentUsed] DESC"
        }
    }

    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 10
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $dbs = $server.Databases

            if ($Database) {
                $dbs = $dbs | Where-Object Name -In $Database
            }

            if ($ExcludeDatabase) {
                $dbs = $dbs | Where-Object Name -NotIn $ExcludeDatabase
            }

            if ($ExcludeSystem) {
                $dbs = $dbs | Where-Object IsSystemObject -EQ $false
            }

            foreach ($db in $dbs) {
                Write-Message -Level Verbose -Message "Processing $db on $instance"

                if ($db.IsAccessible -eq $false) {
                    Stop-Function -Message "The database $db is not accessible. Skipping." -Continue
                }

                try {
                    $results = $db.Query($sql)
                } catch {
                    Stop-Function -Message "Error capturing data on $db" -Target $instance -ErrorRecord $_ -Exception $_.Exception -Continue
                }

                foreach ($row in $results) {
                    if ($row.PercentUsed -eq [System.DBNull]::Value) {
                        continue
                    }

                    if ($row.PercentUsed -ge $threshold) {
                        [PSCustomObject]@{
                            ComputerName   = $server.ComputerName
                            InstanceName   = $server.ServiceName
                            SqlInstance    = $server.DomainInstanceName
                            Database       = $row.DatabaseName
                            Schema         = $row.SchemaName
                            Table          = $row.TableName
                            Column         = $row.ColumnName
                            SeedValue      = $row.SeedValue
                            IncrementValue = $row.IncrementValue
                            LastValue      = $row.LastValue
                            MaxNumberRows  = $row.MaxNumberRows
                            NumberOfUses   = $row.NumberOfUses
                            PercentUsed    = $row.PercentUsed
                        } | Select-DefaultView -Exclude MaxNumberRows, NumberOfUses
                    }
                }
            }
        }
    }
}

tools\dbatools\functions\Test-DbaJobOwner.ps1

function Test-DbaAgentJobOwner {
    <#
    .SYNOPSIS
        Checks SQL Agent Job owners against a login to validate which jobs do not match that owner.

    .DESCRIPTION
        This function checks all SQL Agent Jobs on an instance against a SQL login to validate if that login owns those SQL Agent Jobs or not. By default, the function checks against 'sa' for ownership, but the user can pass a specific login if they use something else.

        Only SQL Agent Jobs that do not match this ownership will be displayed.
        Best practice reference: http://sqlmag.com/blog/sql-server-tip-assign-ownership-jobs-sysadmin-account

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Job
        Specifies the job(s) to process. Options for this list are auto-populated from the server. If unspecified, all jobs will be processed.

    .PARAMETER ExcludeJob
        Specifies the job(s) to exclude from processing. Options for this list are auto-populated from the server.

    .PARAMETER Login
        Specifies the login that you wish check for ownership. This defaults to 'sa' or the sysadmin name if sa was renamed. This must be a valid security principal which exists on the target server.

    .PARAMETER Detailed
        Output all properties, will be deprecated in 1.0.0 release.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Agent, Job, Owner
        Author: Michael Fal (@Mike_Fal), http://mikefal.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Test-DbaAgentJobOwner

    .EXAMPLE
        PS C:\> Test-DbaAgentJobOwner -SqlInstance localhost

        Returns all SQL Agent Jobs where the owner does not match 'sa'.

    .EXAMPLE
        PS C:\> Test-DbaAgentJobOwner -SqlInstance localhost -ExcludeJob 'syspolicy_purge_history'

        Returns SQL Agent Jobs except for the syspolicy_purge_history job

    .EXAMPLE
        PS C:\> Test-DbaAgentJobOwner -SqlInstance localhost -Login DOMAIN\account

        Returns all SQL Agent Jobs where the owner does not match DOMAIN\account. Note
        that Login must be a valid security principal that exists on the target server.

    #>
    [CmdletBinding()]
    [OutputType('System.Object[]')]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias("Jobs")]
        [object[]]$Job,
        [object[]]$ExcludeJob,
        [Alias("TargetLogin")]
        [string]$Login,
        [switch]$Detailed,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        Test-DbaDeprecation -DeprecatedOn 1.0.0 -Parameter Detailed
        #connect to the instance and set return array empty
        $return = @()
    }
    process {
        foreach ($instance in $SqlInstance) {
            #connect to the instance
            $server = Connect-SqlInstance $instance -SqlCredential $SqlCredential

            #Validate login
            if ($Login -and ($server.Logins.Name) -notcontains $Login) {
                if ($SqlInstance.count -eq 1) {
                    Stop-Function -Message "Invalid login: $Login."
                    return
                } else {
                    Write-Message -Level Warning -Message "$Login is not a valid login on $instance. Moving on."
                    continue
                }
            }
            if ($Login -and $server.Logins[$Login].LoginType -eq 'WindowsGroup') {
                Stop-Function -Message "$Login is a Windows Group and can not be a job owner."
                return
            }

            #Sets the Default Login to sa if the Login Paramater is not set.
            if (!($PSBoundParameters.ContainsKey('Login'))) {
                $Login = "sa"
            }
            #sql2000 id property is empty -force target login to 'sa' login
            if ($Login -and ( ($server.VersionMajor -lt 9) -and ([string]::IsNullOrEmpty($Login)) )) {
                $Login = "sa"
            }
            # dynamic sa name for orgs who have changed their sa name
            if ($Login -eq "sa") {
                $Login = ($server.Logins | Where-Object { $_.id -eq 1 }).Name
            }

            #Get database list. If value for -Job is passed, massage to make it a string array.
            #Otherwise, use all jobs on the instance where owner not equal to -TargetLogin
            Write-Message -Level Verbose -Message "Gathering jobs to check."
            if ($Job) {
                $jobCollection = $server.JobServer.Jobs | Where-Object { $Job -contains $_.Name }
            } elseif ($ExcludeJob) {
                $jobCollection = $server.JobServer.Jobs | Where-Object { $ExcludeJob -notcontains $_.Name }
            } else {
                $jobCollection = $server.JobServer.Jobs
            }

            #for each database, create custom object for return set.
            foreach ($j in $jobCollection) {
                Write-Message -Level Verbose -Message "Checking $j"
                $row = [ordered]@{
                    Server       = $server.Name
                    Job          = $j.Name
                    JobType      = if ($j.CategoryID -eq 1) { "Remote" } else { $j.JobType }
                    CurrentOwner = $j.OwnerLoginName
                    TargetOwner  = $Login
                    OwnerMatch   = if ($j.CategoryID -eq 1) { $true } else { $j.OwnerLoginName -eq $Login }

                }
                #add each custom object to the return array
                $return += New-Object PSObject -Property $row
            }
            if ($Job) {
                $results = $return
            } else {
                $results = $return | Where-Object {$_.OwnerMatch -eq $False}
            }
        }
    }
    end {
        #return results
        Select-DefaultView -InputObject $results -Property Server, Job, JobType, CurrentOwner, TargetOwner, OwnerMatch
    }

}

tools\dbatools\functions\Test-DbaLastBackup.ps1

function Test-DbaLastBackup {
    <#
    .SYNOPSIS
        Quickly and easily tests the last set of full backups for a server.

    .DESCRIPTION
        Restores all or some of the latest backups and performs a DBCC CHECKDB.

        1. Gathers information about the last full backups
        2. Restores the backups to the Destination with a new name. If no Destination is specified, the originating SQL Server instance wil be used.
        3. The database is restored as "dbatools-testrestore-$databaseName" by default, but you can change dbatools-testrestore to whatever you would like using -Prefix
        4. The internal file names are also renamed to prevent conflicts with original database
        5. A DBCC CHECKDB is then performed
        6. And the test database is finally dropped

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. Unlike many of the other commands, you cannot specify more than one server.

    .PARAMETER Destination
        The destination server to use to test the restore. By default, the Destination will be set to the source server

        If a different Destination server is specified, you must ensure that the database backups are on a shared location

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER DestinationCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The database backups to test. If -Database is not provided, all database backups will be tested.

    .PARAMETER ExcludeDatabase
        Exclude specific Database backups to test.

    .PARAMETER DataDirectory
        Specifies an alternative directory for mdfs, ndfs and so on. The command uses the SQL Server's default data directory for all restores.

    .PARAMETER LogDirectory
        Specifies an alternative directory for ldfs. The command uses the SQL Server's default log directory for all restores.

    .PARAMETER VerifyOnly
        If this switch is enabled, VERIFYONLY will be performed. An actual restore will not be executed.

    .PARAMETER NoCheck
        If this switch is enabled, DBCC CHECKDB will be skipped

    .PARAMETER NoDrop
        If this switch is enabled, the newly-created test database will not be dropped.

    .PARAMETER CopyFile
        If this switch is enabled, the backup file will be copied to the destination default backup location unless CopyPath is specified.

    .PARAMETER CopyPath
        Specifies a path relative to the SQL Server to copy backups when CopyFile is specified. If not specified will use destination default backup location. If destination SQL Server is not local, admin UNC paths will be utilized for the copy.

    .PARAMETER MaxSize
        Max size in MB. Databases larger than this value will not be restored.

    .PARAMETER AzureCredential
        The name of the SQL Server credential on the destination instance that holds the key to the azure storage account.

    .PARAMETER IncludeCopyOnly
        If this switch is enabled, copy only backups will not be counted as a last backup.

    .PARAMETER IgnoreLogBackup
        If this switch is enabled, transaction log backups will be ignored. The restore will stop at the latest full or differential backup point.

    .PARAMETER Prefix
        The database is restored as "dbatools-testrestore-$databaseName" by default. You can change dbatools-testrestore to whatever you would like using this parameter.

    .PARAMETER InputObject
        Enables piping from Get-DbaDatabase

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: DisasterRecovery, Backup, Restore
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Test-DbaLastBackup

    .EXAMPLE
        PS C:\> Test-DbaLastBackup -SqlInstance sql2016

        Determines the last full backup for ALL databases, attempts to restore all databases (with a different name and file structure), then performs a DBCC CHECKDB. Once the test is complete, the test restore will be dropped.

    .EXAMPLE
        PS C:\> Test-DbaLastBackup -SqlInstance sql2016 -Database SharePoint_Config

        Determines the last full backup for SharePoint_Config, attempts to restore it, then performs a DBCC CHECKDB.

    .EXAMPLE
        PS C:\> Get-DbaDatabase -SqlInstance sql2016, sql2017 | Test-DbaLastBackup

        Tests every database backup on sql2016 and sql2017

    .EXAMPLE
        PS C:\> Get-DbaDatabase -SqlInstance sql2016, sql2017 -Database SharePoint_Config | Test-DbaLastBackup

        Tests the database backup for the SharePoint_Config database on sql2016 and sql2017

    .EXAMPLE
       PS C:\> Test-DbaLastBackup -SqlInstance sql2016 -Database model, master -VerifyOnly

       Skips performing an action restore of the database and simply verifies the backup using VERIFYONLY option of the restore.

    .EXAMPLE
        PS C:\> Test-DbaLastBackup -SqlInstance sql2016 -NoCheck -NoDrop

        Skips the DBCC CHECKDB check. This can help speed up the tests but makes it less tested. The test restores will remain on the server.

    .EXAMPLE
        PS C:\> Test-DbaLastBackup -SqlInstance sql2016 -DataDirectory E:\bigdrive -LogDirectory L:\bigdrive -MaxSize 10240

        Restores data and log files to alternative locations and only restores databases that are smaller than 10 GB.

    .EXAMPLE
        PS C:\> Test-DbaLastBackup -SqlInstance sql2014 -Destination sql2016 -CopyFile

        Copies the backup files for sql2014 databases to sql2016 default backup locations and then attempts restore from there.

    .EXAMPLE
        PS C:\> Test-DbaLastBackup -SqlInstance sql2014 -Destination sql2016 -CopyFile -CopyPath "\\BackupShare\TestRestore\"

        Copies the backup files for sql2014 databases to sql2016 default backup locations and then attempts restore from there.

    #>
    [CmdletBinding(SupportsShouldProcess)]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSAvoidUsingPlainTextForPassword", "", Justification = "For Parameters DestinationCredential and AzureCredential")]
    param (
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [DbaInstanceParameter]$Destination,
        [object]$DestinationCredential,
        [string]$DataDirectory,
        [string]$LogDirectory,
        [string]$Prefix = "dbatools-testrestore-",
        [switch]$VerifyOnly,
        [switch]$NoCheck,
        [switch]$NoDrop,
        [switch]$CopyFile,
        [string]$CopyPath,
        [Alias("MaxMB")]
        [int]$MaxSize,
        [switch]$IncludeCopyOnly,
        [switch]$IgnoreLogBackup,
        [string]$AzureCredential,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Database[]]$InputObject,
        [switch]$EnableException
    )
    begin {
        Test-DbaDeprecation -DeprecatedOn "1.0" -Parameter 'MaxMB'
    }
    process {
        if ($SqlInstance) {
            $InputObject += Get-DbaDatabase -SqlInstance $SqlInstance -SqlCredential $SqlCredential -Database $Database -ExcludeDatabase $ExcludeDatabase
        }

        foreach ($db in $InputObject) {
            if ($db.Name -eq "tempdb") {
                continue
            }

            $sourceserver = $db.Parent
            $source = $db.Parent.Name
            $instance = [DbaInstanceParameter]$source
            $copysuccess = $true
            $dbname = $db.Name

            if (-not (Test-Bound -ParameterName Destination)) {
                $destination = $sourceserver.Name
                $DestinationCredential = $SqlCredential
            }

            try {
                $destserver = Connect-SqlInstance -SqlInstance $destination -SqlCredential $DestinationCredential
            } catch {
                Stop-Function -Message "Failed to connect to: $destination." -Target $destination -Continue
            }

            if ($destserver.VersionMajor -lt $sourceserver.VersionMajor) {
                Stop-Function -Message "$Destination is a lower version than $instance. Backups would be incompatible." -Continue
            }

            if ($destserver.VersionMajor -eq $sourceserver.VersionMajor -and $destserver.VersionMinor -lt $sourceserver.VersionMinor) {
                Stop-Function -Message "$Destination is a lower version than $instance. Backups would be incompatible." -Continue
            }

            if ($CopyPath) {
                $testpath = Test-DbaPath -SqlInstance $destserver -Path $CopyPath
                if (-not $testpath) {
                    Stop-Function -Message "$destserver cannot access $CopyPath." -Continue
                }
            } else {
                # If not CopyPath is specified, use the destination server default backup directory
                $copyPath = $destserver.BackupDirectory
            }

            if ($instance -ne $destination -and -not $CopyFile) {
                $sourcerealname = $sourceserver.ComputerNetBiosName
                $destrealname = $destserver.ComputerNetBiosName

                if ($BackupFolder) {
                    if ($BackupFolder.StartsWith("\\") -eq $false -and $sourcerealname -ne $destrealname) {
                        Stop-Function -Message "Backup folder must be a network share if the source and destination servers are not the same." -Continue
                    }
                }
            }

            if ($datadirectory) {
                if (-not (Test-DbaPath -SqlInstance $destserver -Path $datadirectory)) {
                    $serviceaccount = $destserver.ServiceAccount
                    Stop-Function -Message "Can't access $datadirectory Please check if $serviceaccount has permissions." -Continue
                }
            } else {
                $datadirectory = Get-SqlDefaultPaths -SqlInstance $destserver -FileType mdf
            }

            if ($logdirectory) {
                if (-not (Test-DbaPath -SqlInstance $destserver -Path $logdirectory)) {
                    $serviceaccount = $destserver.ServiceAccount
                    Stop-Function -Message "$Destination can't access its local directory $logdirectory. Please check if $serviceaccount has permissions." -Continue
                }
            } else {
                $logdirectory = Get-SqlDefaultPaths -SqlInstance $destserver -FileType ldf
            }

            if ((Test-Bound -ParameterName AzureCredential) -and (Test-Bound -ParameterName CopyFile)) {
                Stop-Function -Message "Cannot use copyfile with Azure backups, set to false." -continue
                $CopyFile = $false
            }

            Write-Message -Level Verbose -Message "Getting recent backup history for $($db.Name) on $instance."

            if (Test-Bound "IgnoreLogBackup") {
                Write-Message -Level Verbose -Message "Skipping Log backups as requested."
                $lastbackup = @()
                $lastbackup += $full = Get-DbaBackupHistory -SqlInstance $sourceserver -Database $dbname -IncludeCopyOnly:$IncludeCopyOnly -LastFull -WarningAction SilentlyContinue
                $diff = Get-DbaBackupHistory -SqlInstance $sourceserver -Database $dbname -IncludeCopyOnly:$IncludeCopyOnly -LastDiff -WarningAction SilentlyContinue
                if ($full.start -le $diff.start) {
                    $lastbackup += $diff
                }
            } else {
                $lastbackup = Get-DbaBackupHistory -SqlInstance $sourceserver -Database $dbname -IncludeCopyOnly:$IncludeCopyOnly -Last -WarningAction SilentlyContinue
            }

            if (-not $lastbackup) {
                Write-Message -Level Verbose -Message "No backups exist for this database."
                $lastbackup = @{
                    Path = "No backups exist for this database"
                }
                $fileexists = $false
                $success = $restoreresult = $dbccresult = "Skipped"
                continue
            }

            if ($CopyFile) {
                try {
                    Write-Message -Level Verbose -Message "Gathering information for file copy."
                    $removearray = @()

                    foreach ($backup in $lastbackup) {
                        foreach ($file in $backup) {
                            $filename = Split-Path -Path $file.FullName -Leaf
                            Write-Message -Level Verbose -Message "Processing $filename."

                            $sourcefile = Join-AdminUnc -servername $instance.ComputerName -filepath "$($file.Path)"

                            if ($instance.IsLocalHost) {
                                $remotedestdirectory = Join-AdminUnc -servername $instance.ComputerName -filepath $copyPath
                            } else {
                                $remotedestdirectory = $copyPath
                            }

                            $remotedestfile = "$remotedestdirectory\$filename"
                            $localdestfile = "$copyPath\$filename"
                            Write-Message -Level Verbose -Message "Destination directory is $destdirectory."
                            Write-Message -Level Verbose -Message "Destination filename is $remotedestfile."

                            try {
                                Write-Message -Level Verbose -Message "Copying $sourcefile to $remotedestfile."
                                Copy-Item -Path $sourcefile -Destination $remotedestfile -ErrorAction Stop
                                $backup.Path = $localdestfile
                                $backup.FullName = $localdestfile
                                $removearray += $remotedestfile
                            } catch {
                                $backup.Path = $sourcefile
                                $backup.FullName = $sourcefile
                            }
                        }
                    }
                    $copysuccess = $true
                } catch {
                    Write-Message -Level Warning -Message "Failed to copy backups for $dbname on $instance to $destdirectory - $_."
                    $copysuccess = $false
                }
            }
            if (-not $copysuccess) {
                Write-Message -Level Verbose -Message "Failed to copy backups."
                $lastbackup = @{
                    Path = "Failed to copy backups"
                }
                $fileexists = $false
                $success = $restoreresult = $dbccresult = "Skipped"
            } elseif (-not ($lastbackup | Where-Object {
                        $_.type -eq 'Full'
                    })) {
                Write-Message -Level Verbose -Message "No full backup returned from lastbackup."
                $lastbackup = @{
                    Path = "Not found"
                }
                $fileexists = $false
                $success = $restoreresult = $dbccresult = "Skipped"
            } elseif ($source -ne $destination -and $lastbackup[0].Path.StartsWith('\\') -eq $false -and -not $CopyFile) {
                Write-Message -Level Verbose -Message "Path not UNC and source does not match destination. Use -CopyFile to move the backup file."
                $fileexists = $dbccresult = "Skipped"
                $success = $restoreresult = "Restore not located on shared location"
            } elseif (($lastbackup[0].Path | ForEach-Object {
                        Test-DbaPath -SqlInstance $destserver -Path $_
                    }) -eq $false) {
                Write-Message -Level Verbose -Message "SQL Server cannot find backup."
                $fileexists = $false
                $success = $restoreresult = $dbccresult = "Skipped"
            }
            if ($restoreresult -ne "Skipped" -or $lastbackup[0].Path -like 'http*') {
                Write-Message -Level Verbose -Message "Looking good!"

                $fileexists = $true
                $ogdbname = $dbname
                $restorelist = Read-DbaBackupHeader -SqlInstance $destserver -Path $lastbackup[0].Path -AzureCredential $AzureCredential

                if ($MaxSize -and $MaxSize -lt $restorelist.BackupSize.Megabyte) {
                    $success = "The backup size for $dbname ($mb MB) exceeds the specified maximum size ($MaxSize MB)."
                    $dbccresult = "Skipped"
                } else {
                    $dbccElapsed = $restoreElapsed = $startRestore = $endRestore = $startDbcc = $endDbcc = $null

                    $dbname = "$prefix$dbname"
                    $destdb = $destserver.databases[$dbname]

                    if ($destdb) {
                        Stop-Function -Message "$dbname already exists on $destination - skipping." -Continue
                    }

                    if ($Pscmdlet.ShouldProcess($destination, "Restoring $ogdbname as $dbname.")) {
                        Write-Message -Level Verbose -Message "Performing restore."
                        $startRestore = Get-Date
                        if ($verifyonly) {
                            $restoreresult = $lastbackup | Restore-DbaDatabase -SqlInstance $destserver -RestoredDatabaseNamePrefix $prefix -DestinationFilePrefix $Prefix -DestinationDataDirectory $datadirectory -DestinationLogDirectory $logdirectory -VerifyOnly:$VerifyOnly -IgnoreLogBackup:$IgnoreLogBackup -AzureCredential $AzureCredential -TrustDbBackupHistory
                        } else {
                            $restoreresult = $lastbackup | Restore-DbaDatabase -SqlInstance $destserver -RestoredDatabaseNamePrefix $prefix -DestinationFilePrefix $Prefix -DestinationDataDirectory $datadirectory -DestinationLogDirectory $logdirectory -IgnoreLogBackup:$IgnoreLogBackup -AzureCredential $AzureCredential -TrustDbBackupHistory
                            Write-Message -Level Verbose -Message " Restore-DbaDatabase -SqlInstance $destserver -RestoredDatabaseNamePrefix $prefix -DestinationFilePrefix $Prefix -DestinationDataDirectory $datadirectory -DestinationLogDirectory $logdirectory -IgnoreLogBackup:$IgnoreLogBackup -AzureCredential $AzureCredential -TrustDbBackupHistory"

                        }

                        $endRestore = Get-Date
                        $restorets = New-TimeSpan -Start $startRestore -End $endRestore
                        $ts = [timespan]::fromseconds($restorets.TotalSeconds)
                        $restoreElapsed = "{0:HH:mm:ss}" -f ([datetime]$ts.Ticks)

                        if ($restoreresult.RestoreComplete -eq $true) {
                            $success = "Success"
                        } else {
                            $success = "Failure"
                        }
                    }

                    $destserver = Connect-SqlInstance -SqlInstance $destination -SqlCredential $DestinationCredential

                    if (-not $NoCheck -and -not $VerifyOnly) {
                        # shouldprocess is taken care of in Start-DbccCheck
                        if ($ogdbname -eq "master") {
                            $dbccresult = "DBCC CHECKDB skipped for restored master ($dbname) database."
                        } else {
                            if ($success -eq "Success") {
                                Write-Message -Level Verbose -Message "Starting DBCC."

                                $startDbcc = Get-Date
                                $dbccresult = Start-DbccCheck -Server $destserver -DbName $dbname 3>$null
                                $endDbcc = Get-Date

                                $dbccts = New-TimeSpan -Start $startDbcc -End $endDbcc
                                $ts = [timespan]::fromseconds($dbccts.TotalSeconds)
                                $dbccElapsed = "{0:HH:mm:ss}" -f ([datetime]$ts.Ticks)
                            } else {
                                $dbccresult = "Skipped"
                            }
                        }
                    }

                    if ($VerifyOnly) {
                        $dbccresult = "Skipped"
                    }

                    if (-not $NoDrop -and $null -ne $destserver.databases[$dbname]) {
                        if ($Pscmdlet.ShouldProcess($dbname, "Dropping Database $dbname on $destination")) {
                            Write-Message -Level Verbose -Message "Dropping database."

                            ## Drop the database
                            try {
                                #Variable $removeresult marked as unused by PSScriptAnalyzer replace with $null to catch output
                                $null = Remove-DbaDatabase -SqlInstance $destserver -Database $dbname -Confirm:$false
                                Write-Message -Level Verbose -Message "Dropped $dbname Database on $destination."
                            } catch {
                                $destserver.Databases.Refresh()
                                if ($destserver.databases[$dbname]) {
                                    Write-Message -Level Warning -Message "Failed to Drop database $dbname on $destination."
                                }
                            }
                        }
                    }

                    #Cleanup BackupFiles if -CopyFile and backup was moved to destination

                    $destserver.Databases.Refresh()
                    if ($destserver.Databases[$dbname] -and -not $NoDrop) {
                        Write-Message -Level Warning -Message "$dbname was not dropped."
                    }
                }

                if ($CopyFile) {
                    Write-Message -Level Verbose -Message "Removing copied backup file from $destination."
                    try {
                        $removearray | Remove-item -ErrorAction Stop
                    } catch {
                        Write-Message -Level Warning -Message $_ -ErrorRecord $_ -Target $instance
                    }
                }
            }

            if ($Pscmdlet.ShouldProcess("console", "Showing results")) {
                [pscustomobject]@{
                    SourceServer   = $source
                    TestServer     = $destination
                    Database       = $db.name
                    FileExists     = $fileexists
                    Size           = [dbasize](($lastbackup.TotalSize | Measure-Object -Sum).Sum)
                    RestoreResult  = $success
                    DbccResult     = $dbccresult
                    RestoreStart   = [dbadatetime]$startRestore
                    RestoreEnd     = [dbadatetime]$endRestore
                    RestoreElapsed = $restoreElapsed
                    DbccStart      = [dbadatetime]$startDbcc
                    DbccEnd        = [dbadatetime]$endDbcc
                    DbccElapsed    = $dbccElapsed
                    BackupDates    = [String[]]($lastbackup.Start)
                    BackupFiles    = $lastbackup.FullName
                }
            }
        }
    }
}

tools\dbatools\functions\Set-DbaDbMirror.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Set-DbaDbMirror {
    <#
    .SYNOPSIS
        Sets properties of database mirrors.

    .DESCRIPTION
        Sets properties of database mirrors.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function
        to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The target database.

    .PARAMETER Partner
        Sets the partner fqdn.

    .PARAMETER Witness
        Sets the witness fqdn.

    .PARAMETER SafetyLevel
        Sets the mirroring safety level.

    .PARAMETER State
        Sets the mirror state.

    .PARAMETER InputObject
        Allows piping from Get-DbaDatabase.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Mirror, HA
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Set-DbaDbMirror

    .EXAMPLE
        PS C:\> Set-DbaDbMirror -SqlInstance sql2005 -Database dbatools -Partner TCP://SQL2008.ad.local:5374

        Prompts for confirmation then sets the partner to TCP://SQL2008.ad.local:5374 for the database "dbtools"

    .EXAMPLE
        PS C:\> Set-DbaDbMirror -SqlInstance sql2005 -Database dbatools -Witness TCP://SQL2012.ad.local:5502 -Confirm:$false

        Does not prompt for confirmation and sets the witness to TCP://SQL2012.ad.local:5502 for the database "dbtools"

    .EXAMPLE
        PS C:\> Get-DbaDatabase -SqlInstance sql2005 | Out-GridView -PassThru | Set-DbaDbMirror -SafetyLevel Full -Confirm:$false

        Sets the safety level to Full for databases selected from a grid view. Does not prompt for confirmation.

    .EXAMPLE
        PS C:\> Set-DbaDbMirror -SqlInstance sql2005 -Database dbatools -State Suspend -Confirm:$false

        Does not prompt for confirmation and sets the state to suspend for the database "dbtools"

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'High')]
    param (
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$Database,
        [string]$Partner,
        [string]$Witness,
        [ValidateSet('Full', 'Off', 'None')]
        [string]$SafetyLevel,
        [ValidateSet('ForceFailoverAndAllowDataLoss', 'Failover', 'RemoveWitness', 'Resume', 'Suspend', 'Off')]
        [string]$State,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Database[]]$InputObject,
        [switch]$EnableException
    )
    process {
        if ((Test-Bound -ParameterName SqlInstance) -and (Test-Bound -Not -ParameterName Database)) {
            Stop-Function -Message "Database is required when SqlInstance is specified"
            return
        }
        foreach ($instance in $SqlInstance) {
            $InputObject += Get-DbaDatabase -SqlInstance $instance -SqlCredential $SqlCredential -Database $Database
        }

        foreach ($db in $InputObject) {
            try {
                if ($Partner) {
                    if ($Pscmdlet.ShouldProcess($db.Parent.Name, "Setting partner on $db")) {
                        # use t-sql cuz $db.Alter() doesnt always work against restoring dbs
                        $db.Parent.Query("ALTER DATABASE $db SET PARTNER = N'$Partner'")
                    }
                } elseif ($Witness) {
                    if ($Pscmdlet.ShouldProcess($db.Parent.Name, "Setting witness on $db")) {
                        $db.Parent.Query("ALTER DATABASE $db SET WITNESS = N'$Witness'")
                    }
                }

                if ($SafetyLevel) {
                    if ($Pscmdlet.ShouldProcess($db.Parent.Name, "Changing safety level to $SafetyLevel on $db")) {
                        $db.Parent.Query("ALTER DATABASE $db SET PARTNER SAFETY $SafetyLevel")
                        # $db.MirroringSafetyLevel = $SafetyLevel
                    }
                }

                if ($State) {
                    if ($Pscmdlet.ShouldProcess($db.Parent.Name, "Changing mirror state to $State on $db")) {
                        $db.ChangeMirroringState($State)
                        $db.Alter()
                        $db
                    }
                }
            } catch {
                Stop-Function -Message "Failure" -ErrorRecord $_
            }
        }
    }
}

tools\dbatools\functions\Set-DbaDbCompression.ps1

function Set-DbaDbCompression {
    <#
    .SYNOPSIS
        Sets tables and indexes with preferred compression setting.

    .DESCRIPTION
        This function sets the appropriate compression recommendation, determined either by using the Tiger Team's query or set to the CompressionType parameter.

        Remember Uptime is critical for the Tiger Team query, the longer uptime, the more accurate the analysis is.
        You would probably be best if you utilized Get-DbaUptime first, before running this command.

        Set-DbaDbCompression script derived from GitHub and the tigertoolbox
        (https://github.com/Microsoft/tigertoolbox/tree/master/Evaluate-Compression-Gains)

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The database(s) to process - this list is auto populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        The database(s) to exclude - this list is auto populated from the server.

    .PARAMETER CompressionType
        Control the compression type applied. Default is 'Recommended' which uses the Tiger Team query to use the most appropriate setting per object. Other option is to compress all objects to either Row or Page.

    .PARAMETER MaxRunTime
        Will continue to alter tables and indexes for the given amount of minutes.

    .PARAMETER PercentCompression
        Will only work on the tables/indexes that have the calculated savings at and higher for the given number provided.

    .PARAMETER InputObject
        Takes the output of Test-DbaDbCompression as an object and applied compression based on those recommendations.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Compression, Table, Database
        Author: Jason Squires (@js_0505), [email protected]

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Set-DbaDbCompression

    .EXAMPLE
        PS C:\> Set-DbaDbCompression -SqlInstance localhost -MaxRunTime 60 -PercentCompression 25

        Set the compression run time to 60 minutes and will start the compression of tables/indexes that have a difference of 25% or higher between current and recommended.

    .EXAMPLE
        PS C:\> Set-DbaDbCompression -SqlInstance ServerA -Database DBName -CompressionType Page

        Utilizes Page compression for all objects in DBName on ServerA with no time limit.

    .EXAMPLE
        PS C:\> Set-DbaDbCompression -SqlInstance ServerA -Database DBName -PercentCompression 25 | Out-GridView

        Will compress tables/indexes within the specified database that would show any % improvement with compression and with no time limit. The results will be piped into a nicely formatted GridView.

    .EXAMPLE
        PS C:\> $testCompression = Test-DbaDbCompression -SqlInstance ServerA -Database DBName
        PS C:\> Set-DbaDbCompression -SqlInstance ServerA -Database DBName -InputObject $testCompression

        Gets the compression suggestions from Test-DbaDbCompression into a variable, this can then be reviewed and passed into Set-DbaDbCompression.

    .EXAMPLE
        PS C:\> $cred = Get-Credential sqladmin
        PS C:\> Set-DbaDbCompression -SqlInstance ServerA -ExcludeDatabase Database -SqlCredential $cred -MaxRunTime 60 -PercentCompression 25

        Set the compression run time to 60 minutes and will start the compression of tables/indexes for all databases except the specified excluded database. Only objects that have a difference of 25% or higher between current and recommended will be compressed.

    .EXAMPLE
        PS C:\> $servers = 'Server1','Server2'
        PS C:\> foreach ($svr in $servers) {
        >> Set-DbaDbCompression -SqlInstance $svr -MaxRunTime 60 -PercentCompression 25 | Export-Csv -Path C:\temp\CompressionAnalysisPAC.csv -Append
        >> }

        Set the compression run time to 60 minutes and will start the compression of tables/indexes across all listed servers that have a difference of 25% or higher between current and recommended. Output of command is exported to a csv.

    #>
    [CmdletBinding(DefaultParameterSetName = "Default", SupportsShouldProcess)]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseOutputTypeCorrectly", "", Justification = "PSSA Rule Ignored by BOH")]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [ValidateSet("Recommended", "Page", "Row", "None")]$CompressionType = "Recommended",
        [int]$MaxRunTime = 0,
        [int]$PercentCompression = 0,
        $InputObject,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        $starttime = Get-Date
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 10
            } catch {
                Stop-Function -Message "Failed to process Instance $instance" -ErrorRecord $_ -Target $instance -Continue
            }

            $Server.ConnectionContext.StatementTimeout = 0

            #The reason why we do this is because of SQL 2016 and they now allow for compression on standard edition.
            if ($server.EngineEdition -notmatch 'Enterprise' -and $server.VersionMajor -lt '13') {
                Stop-Function -Message "Only SQL Server Enterprise Edition supports compression on $server" -Target $server -Continue
            }
            try {
                $dbs = $server.Databases | Where-Object { $_.IsAccessible -and $_.IsSystemObject -eq 0}
                if ($Database) {
                    $dbs = $dbs | Where-Object { $_.Name -in $Database }
                }
                if ($ExcludeDatabase) {
                    $dbs = $dbs | Where-Object { $_.Name -NotIn $ExcludeDatabase }
                }
            } catch {
                Stop-Function -Message "Unable to gather list of databases for $instance" -Target $instance -ErrorRecord $_ -Continue
            }

            foreach ($db in $dbs) {
                try {
                    Write-Message -Level Verbose -Message "Querying $instance - $db"
                    if ($db.status -ne 'Normal' -or $db.IsAccessible -eq $false) {
                        Write-Message -Level Warning -Message "$db is not accessible" -Target $db
                        continue
                    }
                    if ($db.CompatibilityLevel -lt 'Version100') {
                        Stop-Function -Message "$db has a compatibility level lower than Version100 and will be skipped." -Target $db -Continue
                    }
                    if ($CompressionType -eq "Recommended") {
                        if (Test-Bound "InputObject") {
                            Write-Message -Level Verbose -Message "Using passed in compression suggestions"
                            $compressionSuggestion = $InputObject | Where-Object {$_.Database -eq $db.name}
                        } else {
                            Write-Message -Level Verbose -Message "Testing database for compression suggestions for $instance.$db"
                            $compressionSuggestion = Test-DbaDbCompression -SqlInstance $server -Database $db.Name
                        }
                    }
                } catch {
                    Stop-Function -Message "Unable to query $instance - $db" -Target $db -ErrorRecord $_ -Continue
                }

                try {
                    if ($CompressionType -eq "Recommended") {
                        if ($Pscmdlet.ShouldProcess($db, "Applying suggested compression using results from Test-DbaDbCompression")) {
                            Write-Message -Level Verbose -Message "Applying suggested compression settings using Test-DbaDbCompression"
                            $results += $compressionSuggestion | Select-Object *, @{l = 'AlreadyProcessed'; e = {"False"}}
                            foreach ($obj in ($results | Where-Object {$_.CompressionTypeRecommendation -notin @('NO_GAIN', '?') -and $_.PercentCompression -ge $PercentCompression} | Sort-Object PercentCompression -Descending)) {
                                if ($MaxRunTime -ne 0 -and ($(get-date) - $starttime).TotalMinutes -ge $MaxRunTime) {
                                    Write-Message -Level Verbose -Message "Reached max run time of $MaxRunTime"
                                    break
                                }
                                if ($obj.indexId -le 1) {
                                    ##heaps and clustered indexes
                                    Write-Message -Level Verbose -Message "Applying $($obj.CompressionTypeRecommendation) compression to $($obj.Database).$($obj.Schema).$($obj.TableName)"
                                    $($server.Databases[$obj.Database].Tables[$obj.TableName, $obj.Schema].PhysicalPartitions | Where-Object {$_.PartitionNumber -eq $obj.Partition}).DataCompression = $($obj.CompressionTypeRecommendation)
                                    $server.Databases[$obj.Database].Tables[$obj.TableName, $($obj.Schema)].Rebuild()
                                    $obj.AlreadyProcessed = "True"
                                } else {
                                    ##nonclustered indexes
                                    Write-Message -Level Verbose -Message "Applying $($obj.CompressionTypeRecommendation) compression to $($obj.Database).$($obj.Schema).$($obj.TableName).$($obj.IndexName)"
                                    $($server.Databases[$obj.Database].Tables[$obj.TableName, $obj.Schema].Indexes[$obj.IndexName].PhysicalPartitions | Where-Object {$_.PartitionNumber -eq $obj.Partition}).DataCompression = $($obj.CompressionTypeRecommendation)
                                    $server.Databases[$obj.Database].Tables[$obj.TableName, $obj.Schema].Indexes[$obj.IndexName].Rebuild()
                                    $obj.AlreadyProcessed = "True"
                                }
                                $obj
                            }
                        }
                    } else {
                        if ($Pscmdlet.ShouldProcess($db, "Applying $CompressionType compression")) {
                            Write-Message -Level Verbose -Message "Applying $CompressionType compression to all objects in $($db.name)"
                            foreach ($obj in $server.Databases[$($db.name)].Tables | Where-Object {!$_.IsMemoryOptimized}) {
                                if ($MaxRunTime -ne 0 -and ($(get-date) - $starttime).TotalMinutes -ge $MaxRunTime) {
                                    Write-Message -Level Verbose -Message "Reached max run time of $MaxRunTime"
                                    break
                                }
                                foreach ($p in $($obj.PhysicalPartitions | Where-Object {$_.DataCompression -notin ($CompressionType, 'ColumnStore', 'ColumnStoreArchive')})) {
                                    Write-Message -Level Verbose -Message "Compressing table $($obj.Schema).$($obj.Name)"
                                    $($obj.PhysicalPartitions | Where-Object {$_.PartitionNumber -eq $P.PartitionNumber}).DataCompression = $CompressionType
                                    $obj.Rebuild()
                                    [pscustomobject]@{
                                        ComputerName                  = $server.ComputerName
                                        InstanceName                  = $server.ServiceName
                                        SqlInstance                   = $server.DomainInstanceName
                                        Database                      = $db.Name
                                        Schema                        = $obj.Schema
                                        TableName                     = $obj.Name
                                        IndexName                     = $null
                                        Partition                     = $p.PartitionNumber
                                        IndexID                       = 0
                                        IndexType                     = Switch ($obj.HasHeapIndex) {$false {"ClusteredIndex"} $true {"Heap"}}
                                        PercentScan                   = $null
                                        PercentUpdate                 = $null
                                        RowEstimatePercentOriginal    = $null
                                        PageEstimatePercentOriginal   = $null
                                        CompressionTypeRecommendation = $CompressionType.ToUpper()
                                        SizeCurrent                   = $null
                                        SizeRequested                 = $null
                                        PercentCompression            = $null
                                        AlreadyProcessed              = "True"
                                    }
                                }

                                foreach ($index in $($obj.Indexes | Where-Object {!$_.IsMemoryOptimized -and $_.IndexType -notmatch 'Columnstore'})) {
                                    if ($MaxRunTime -ne 0 -and ($(get-date) - $starttime).TotalMinutes -ge $MaxRunTime) {
                                        Write-Message -Level Verbose -Message "Reached max run time of $MaxRunTime"
                                        break
                                    }
                                    foreach ($p in $($index.PhysicalPartitions | Where-Object {$_.DataCompression -ne $CompressionType})) {
                                        Write-Message -Level Verbose -Message "Compressing $($Index.IndexType) $($Index.Name) Partition $($p.PartitionNumber)"

                                        ## There is a bug in SMO where setting compression to None at the index level doesn't work
                                        ## Once this UserVoice item is fixed the workaround can be removed
                                        ## https://feedback.azure.com/forums/908035-sql-server/suggestions/34080112-data-compression-smo-bug
                                        if ($CompressionType -eq "None") {
                                            $query = "ALTER INDEX [$($index.Name)] ON $($index.Parent) REBUILD PARTITION = ALL WITH (DATA_COMPRESSION = $CompressionType)"
                                            $Server.Query($query, $db.Name)
                                        } else {
                                            $($Index.PhysicalPartitions | Where-Object {$_.PartitionNumber -eq $P.PartitionNumber}).DataCompression = $CompressionType
                                            $index.Rebuild()
                                        }

                                        [pscustomobject]@{
                                            ComputerName                  = $server.ComputerName
                                            InstanceName                  = $server.ServiceName
                                            SqlInstance                   = $server.DomainInstanceName
                                            Database                      = $db.Name
                                            Schema                        = $obj.Schema
                                            TableName                     = $obj.Name
                                            IndexName                     = $index.Name
                                            Partition                     = $p.PartitionNumber
                                            IndexID                       = $index.Id
                                            IndexType                     = $index.IndexType
                                            PercentScan                   = $null
                                            PercentUpdate                 = $null
                                            RowEstimatePercentOriginal    = $null
                                            PageEstimatePercentOriginal   = $null
                                            CompressionTypeRecommendation = $CompressionType.ToUpper()
                                            SizeCurrent                   = $null
                                            SizeRequested                 = $null
                                            PercentCompression            = $null
                                            AlreadyProcessed              = "True"
                                        }
                                    }
                                }
                            }
                            foreach ($index in $($server.Databases[$($db.name)].Views | Where-Object {$_.Indexes}).Indexes) {
                                foreach ($p in $($index.PhysicalPartitions | Where-Object {$_.DataCompression -ne $CompressionType})) {
                                    Write-Message -Level Verbose -Message "Compressing $($index.IndexType) $($index.Name) Partition $($p.PartitionNumber)"

                                    ## There is a bug in SMO where setting compression to None at the index level doesn't work
                                    ## Once this UserVoice item is fixed the workaround can be removed
                                    ## https://feedback.azure.com/forums/908035-sql-server/suggestions/34080112-data-compression-smo-bug
                                    if ($CompressionType -eq "None") {
                                        $query = "ALTER INDEX [$($index.Name)] ON $($index.Parent) REBUILD PARTITION = ALL WITH (DATA_COMPRESSION = $CompressionType)"
                                        $query
                                        $Server.Query($query, $db.Name)
                                    } else {
                                        $($index.PhysicalPartitions | Where-Object {$_.PartitionNumber -eq $P.PartitionNumber}).DataCompression = $CompressionType
                                        $index.Rebuild()
                                    }

                                    [pscustomobject]@{
                                        ComputerName                  = $server.ComputerName
                                        InstanceName                  = $server.ServiceName
                                        SqlInstance                   = $server.DomainInstanceName
                                        Database                      = $db.Name
                                        Schema                        = $obj.Schema
                                        TableName                     = $obj.Name
                                        IndexName                     = $index.Name
                                        Partition                     = $p.PartitionNumber
                                        IndexID                       = $index.Id
                                        IndexType                     = $index.IndexType
                                        PercentScan                   = $null
                                        PercentUpdate                 = $null
                                        RowEstimatePercentOriginal    = $null
                                        PageEstimatePercentOriginal   = $null
                                        CompressionTypeRecommendation = $CompressionType.ToUpper()
                                        SizeCurrent                   = $null
                                        SizeRequested                 = $null
                                        PercentCompression            = $null
                                        AlreadyProcessed              = "True"
                                    }
                                }
                            }
                        }
                    }
                } catch {
                    Stop-Function -Message "Compression failed for $instance - $db" -Target $db -ErrorRecord $_ -Continue
                }
            }
        }
    }
}

tools\dbatools\functions\Test-DbaManagementObject.ps1

function Test-DbaManagementObject {
    <#
    .SYNOPSIS
        Tests to see if the SMO version specified exists on the computer.

    .DESCRIPTION
        The Test-DbaManagementObject returns True if the Version is on the computer, and False if it does not exist.

    .PARAMETER ComputerName
        The name of the target you would like to check

    .PARAMETER Credential
        This command uses Windows credentials. This parameter allows you to connect remotely as a different user.

    .PARAMETER VersionNumber
        This is the specific version number you are looking for and the return will be True.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: SMO
        Author: Ben Miller (@DBAduck), http://dbaduck.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Test-DbaManagementObject

    .EXAMPLE
        PS C:\> Test-DbaManagementObject -VersionNumber 13

        Returns True if the version exists, if it does not exist it will return False

    #>
    [CmdletBinding()]
    param (
        [parameter(ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "SqlInstance")]
        [DbaInstance[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [Parameter(Mandatory)]
        [int[]]$VersionNumber,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        $scriptblock = {
            foreach ($number in $args) {
                $smoList = (Get-ChildItem -Path "$($env:SystemRoot)\assembly\GAC_MSIL\Microsoft.SqlServer.Smo" -Filter "$number.*" | Sort-Object Name -Descending).Name

                if ($smoList) {
                    [pscustomobject]@{
                        ComputerName = $env:COMPUTERNAME
                        Version      = $number
                        Exists       = $true
                    }
                } else {
                    [pscustomobject]@{
                        ComputerName = $env:COMPUTERNAME
                        Version      = $number
                        Exists       = $false
                    }
                }
            }
        }
    }
    process {
        foreach ($computer in $ComputerName.ComputerName) {
            try {
                Invoke-Command2 -ComputerName $computer -ScriptBlock $scriptblock -Credential $Credential -ArgumentList $VersionNumber -ErrorAction Stop
            } catch {
                Stop-Function -Continue -Message "Failure" -ErrorRecord $_ -Target $computer -Continue
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Test-DbaSqlManagementObject
    }
}

tools\dbatools\functions\Test-DbaMaxDop.ps1

function Test-DbaMaxDop {
    <#
    .SYNOPSIS
        Displays information relating to SQL Server Max Degree of Parallelism setting. Works on SQL Server 2005-2016.

    .DESCRIPTION
        Inspired by Sakthivel Chidambaram's post about SQL Server MAXDOP Calculator (https://blogs.msdn.microsoft.com/sqlsakthi/p/maxdop-calculator-SqlInstance/),
        this script displays a SQL Server's: max dop configured, and the calculated recommendation.

        For SQL Server 2016 shows:
        - Instance max dop configured and the calculated recommendation
        - max dop configured per database (new feature)

        More info:
        https://support.microsoft.com/en-us/kb/2806535
        https://blogs.msdn.microsoft.com/sqlsakthi/2012/05/23/wow-we-have-maxdop-calculator-for-sql-server-it-makes-my-job-easier/

        These are just general recommendations for SQL Server and are a good starting point for setting the "max degree of parallelism" option.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Detailed
        Output all properties, will be deprecated in 1.0.0 release.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: MaxDop, SpConfigure
        Author: Claudio Silva (@claudioessilva)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        Requires: sysadmin access on SQL Servers

    .LINK
        https://dbatools.io/Test-DbaMaxDop

    .EXAMPLE
        PS C:\> Test-DbaMaxDop -SqlInstance sql2008, sqlserver2012

        Get Max DOP setting for servers sql2008 and sqlserver2012 and also the recommended one.

    .EXAMPLE
        PS C:\> Test-DbaMaxDop -SqlInstance sql2014 | Select-Object *

        Shows Max DOP setting for server sql2014 with the recommended value. Piping the output to Select-Object * will also show the 'NumaNodes' and 'NumberOfCores' of each instance

    .EXAMPLE
        PS C:\> Test-DbaMaxDop -SqlInstance sqlserver2016 | Select-Object *

        Get Max DOP setting for servers sql2016 with the recommended value. Piping the output to Select-Object * will also show the 'NumaNodes' and 'NumberOfCores' of each instance. Because it is an 2016 instance will be shown 'InstanceVersion', 'Database' and 'DatabaseMaxDop' columns.

       #>
    [CmdletBinding()]
    [OutputType([System.Collections.ArrayList])]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "SqlServers")]
        [DbaInstance[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [switch]$Detailed,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        Test-DbaDeprecation -DeprecatedOn 1.0.0 -Parameter Detailed

        $notesDopLT = "Before changing MaxDop, consider that the lower value may have been intentionally set."
        $notesDopGT = "Before changing MaxDop, consider that the higher value may have been intentionally set."
        $notesDopZero = "This is the default setting. Consider using the recommended value instead."
        $notesDopOne = "Some applications like SharePoint, Dynamics NAV, SAP, BizTalk has the need to use MAXDOP = 1. Please confirm that your instance is not supporting one of these applications prior to changing the MaxDop."
        $notesAsRecommended = "Configuration is as recommended."
    }

    process {
        #Variable marked as unused by PSScriptAnalyzer
        #$hasScopedConfig = $false

        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            #Get current configured value
            $maxDop = $server.Configuration.MaxDegreeOfParallelism.ConfigValue

            try {
                #represents the Number of NUMA nodes
                $sql = "SELECT COUNT(DISTINCT memory_node_id) AS NUMA_Nodes FROM sys.dm_os_memory_clerks WHERE memory_node_id!=64"
                $NumaNodes = $server.ConnectionContext.ExecuteScalar($sql)
            } catch {
                Stop-Function -Message "Failed to get Numa node count." -ErrorRecord $_ -Target $server -Continue
            }

            try {
                #represents the Number of Processor Cores
                $sql = "SELECT COUNT(scheduler_id) FROM sys.dm_os_schedulers WHERE status = 'VISIBLE ONLINE'"
                $numberOfCores = $server.ConnectionContext.ExecuteScalar($sql)
            } catch {
                Stop-Function -Message "Failed to get number of cores." -ErrorRecord $_ -Target $server -Continue
            }

            #Calculate Recommended Max Dop to instance
            #Server with single NUMA node
            if ($NumaNodes -eq 1) {
                if ($numberOfCores -lt 8) {
                    #Less than 8 logical processors - Keep MAXDOP at or below # of logical processors
                    $recommendedMaxDop = $numberOfCores
                } else {
                    #Equal or greater than 8 logical processors - Keep MAXDOP at 8
                    $recommendedMaxDop = 8
                }
            } else {
                #Server with multiple NUMA nodes
                if (($numberOfCores / $NumaNodes) -lt 8) {
                    # Less than 8 logical processors per NUMA node - Keep MAXDOP at or below # of logical processors per NUMA node
                    $recommendedMaxDop = [int]($numberOfCores / $NumaNodes)
                } else {
                    # Greater than 8 logical processors per NUMA node - Keep MAXDOP at 8
                    $recommendedMaxDop = 8
                }
            }

            #Setting notes for instance max dop value
            $notes = $null
            if ($maxDop -eq 1) {
                $notes = $notesDopOne
            } else {
                if ($maxDop -ne 0 -and $maxDop -lt $recommendedMaxDop) {
                    $notes = $notesDopLT
                } else {
                    if ($maxDop -ne 0 -and $maxDop -gt $recommendedMaxDop) {
                        $notes = $notesDopGT
                    } else {
                        if ($maxDop -eq 0) {
                            $notes = $notesDopZero
                        } else {
                            $notes = $notesAsRecommended
                        }
                    }
                }
            }

            [pscustomobject]@{
                ComputerName          = $server.ComputerName
                InstanceName          = $server.ServiceName
                SqlInstance           = $server.DomainInstanceName
                InstanceVersion       = $server.Version
                Database              = "N/A"
                DatabaseMaxDop        = "N/A"
                CurrentInstanceMaxDop = $maxDop
                RecommendedMaxDop     = $recommendedMaxDop
                NumaNodes             = $NumaNodes
                NumberOfCores         = $numberOfCores
                Notes                 = $notes
            } | Select-DefaultView -Property ComputerName, InstanceName, SqlInstance, Database, DatabaseMaxDop, CurrentInstanceMaxDop, RecommendedMaxDop, Notes

            # On SQL Server 2016 and higher, MaxDop can be set on a per-database level
            if ($server.VersionMajor -ge 13) {
                #Variable marked as unused by PSScriptAnalyzer
                #$hasScopedConfig = $true
                Write-Message -Level Verbose -Message "SQL Server 2016 or higher detected, checking each database's MaxDop."

                $databases = $server.Databases | where-object {$_.IsSystemObject -eq $false}

                foreach ($database in $databases) {
                    if ($database.IsAccessible -eq $false) {
                        Write-Message -Level Verbose -Message "Database $database is not accessible."
                        continue
                    }
                    Write-Message -Level Verbose -Message "Checking database '$($database.Name)'."

                    $dbmaxdop = $database.MaxDop

                    [pscustomobject]@{
                        ComputerName          = $server.ComputerName
                        InstanceName          = $server.ServiceName
                        SqlInstance           = $server.DomainInstanceName
                        InstanceVersion       = $server.Version
                        Database              = $database.Name
                        DatabaseMaxDop        = $dbmaxdop
                        CurrentInstanceMaxDop = $maxDop
                        RecommendedMaxDop     = $recommendedMaxDop
                        NumaNodes             = $NumaNodes
                        NumberOfCores         = $numberOfCores
                        Notes                 = if ($dbmaxdop -eq 0) { "Will use CurrentInstanceMaxDop value" } else { "$notes" }
                    }  | Select-DefaultView -Property ComputerName, InstanceName, SqlInstance, Database, DatabaseMaxDop, CurrentInstanceMaxDop, RecommendedMaxDop, Notes
                }
            }
        }
    }
}

tools\dbatools\functions\Test-DbaMaxMemory.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Test-DbaMaxMemory {
    <#
    .SYNOPSIS
        Calculates the recommended value for SQL Server 'Max Server Memory' configuration setting. Works on SQL Server 2000-2014.

    .DESCRIPTION
        Inspired by Jonathan Kehayias's post about SQL Server Max memory (http://bit.ly/sqlmemcalc), this script displays a SQL Server's: total memory, currently configured SQL max memory, and the calculated recommendation.

        Jonathan notes that the formula used provides a *general recommendation* that doesn't account for everything that may be going on in your specific environment.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Windows or Sql Login Credential with permission to log into the SQL instance

    .PARAMETER Credential
        Windows Credential with permission to log on to the server running the SQL instance

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: MaxMemory, Memory
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Test-DbaMaxMemory

    .EXAMPLE
        PS C:\> Test-DbaMaxMemory -SqlInstance sqlcluster,sqlserver2012

        Calculate the 'Max Server Memory' for SQL Server instances sqlcluster and sqlserver2012

    .EXAMPLE
        PS C:\> Get-DbaCmsRegServer -SqlInstance sqlcluster | Test-DbaMaxMemory

        Calculate the 'Max Server Memory' settings for all servers within the SQL Server Central Management Server "sqlcluster"

    .EXAMPLE
        PS C:\> Get-DbaCmsRegServer -SqlInstance sqlcluster | Test-DbaMaxMemory | Where-Object { $_.MaxValue -gt $_.Total } | Set-DbaMaxMemory

        Find all servers in CMS that have Max SQL memory set to higher than the total memory of the server (think 2147483647) and set it to recommended value.

       #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [PSCredential]$Credential,
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            Write-Message -Level VeryVerbose -Message "Processing $instance" -Target $instance

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            Write-Message -Level Verbose -Target $instance -Message "Retrieving maximum memory statistics from $instance"
            $serverMemory = Get-DbaMaxMemory -SqlInstance $server
            try {
                Write-Message -Level Verbose -Target $instance -Message "Retrieving number of instances from $($instance.ComputerName)"
                if ($Credential) {
                    $serverService = Get-DbaService -ComputerName $instance -Credential $Credential -EnableException
                } else {
                    $serverService = Get-DbaService -ComputerName $instance -EnableException
                }
                $instanceCount = ($serverService | Where-Object State -Like Running | Where-Object InstanceName | Group-Object InstanceName | Measure-Object Count).Count
            } catch {
                Write-Message -Level Warning -Message "Couldn't get accurate SQL Server instance count on $instance. Defaulting to 1." -Target $instance -ErrorRecord $_
                $instanceCount = 1
            }

            if ($null -eq $serverMemory) {
                continue
            }
            $reserve = 1

            $maxMemory = $serverMemory.MaxValue
            $totalMemory = $serverMemory.Total

            if ($totalMemory -ge 4096) {
                $currentCount = $totalMemory
                while ($currentCount / 4096 -gt 0) {
                    if ($currentCount -gt 16384) {
                        $reserve += 1
                        $currentCount += -8192
                    } else {
                        $reserve += 1
                        $currentCount += -4096
                    }
                }
                $recommendedMax = [int]($totalMemory - ($reserve * 1024))
            } else {
                $recommendedMax = $totalMemory * .5
            }

            $recommendedMax = $recommendedMax / $instanceCount

            [pscustomobject]@{
                ComputerName     = $server.ComputerName
                InstanceName     = $server.ServiceName
                SqlInstance      = $server.DomainInstanceName
                InstanceCount    = $instanceCount
                Total            = [int]$totalMemory
                MaxValue         = [int]$maxMemory
                RecommendedValue = [int]$recommendedMax
                Server           = $server # This will allowing piping a non-connected object
            } | Select-DefaultView -Property ComputerName, InstanceName, SqlInstance, InstanceCount, Total, MaxValue, RecommendedValue
        }
    }
}

tools\dbatools\functions\Test-DbaMigrationConstraint.ps1

function Test-DbaMigrationConstraint {
    <#
    .SYNOPSIS
        Show if you can migrate the database(s) between the servers.

    .DESCRIPTION
        When you want to migrate from a higher edition to a lower one there are some features that can't be used.
        This function will validate if you have any of this features in use and will report to you.
        The validation will be made ONLY on on SQL Server 2008 or higher using the 'sys.dm_db_persisted_sku_features' dmv.

        This function only validate SQL Server 2008 versions or higher.
        The editions supported by this function are:
        - Enterprise
        - Developer
        - Evaluation
        - Standard
        - Express

        Take into account the new features introduced on SQL Server 2016 SP1 for all versions. More information at https://blogs.msdn.microsoft.com/sqlreleaseservices/sql-server-2016-service-pack-1-sp1-released/

        The -Database parameter is auto-populated for command-line completion.

    .PARAMETER Source
        Source SQL Server. You must have sysadmin access and server version must be SQL Server version 2000 or higher.

    .PARAMETER SourceSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Destination
        Destination SQL Server. You must have sysadmin access and the server must be SQL Server 2000 or higher.

    .PARAMETER DestinationSqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The database(s) to process. Options for this list are auto-populated from the server. If unspecified, all databases will be processed.

    .PARAMETER ExcludeDatabase
        The database(s) to exclude. Options for this list are auto-populated from the server.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Migration
        Author: Claudio Silva (@ClaudioESSilva)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Test-DbaMigrationConstraint

    .EXAMPLE
        PS C:\> Test-DbaMigrationConstraint -Source sqlserver2014a -Destination sqlcluster

        All databases on sqlserver2014a will be verified for features in use that can't be supported on sqlcluster.

    .EXAMPLE
        PS C:\> Test-DbaMigrationConstraint -Source sqlserver2014a -Destination sqlcluster -SourceSqlCredential $cred

        All databases will be verified for features in use that can't be supported on the destination server. SQL credentials are used to authenticate against sqlserver2014a and Windows Authentication is used for sqlcluster.

    .EXAMPLE
        PS C:\> Test-DbaMigrationConstraint -Source sqlserver2014a -Destination sqlcluster -Database db1

        Only db1 database will be verified for features in use that can't be supported on the destination server.

    #>
    [CmdletBinding(DefaultParameterSetName = "DbMigration")]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [DbaInstance]$Source,
        [PSCredential]$SourceSqlCredential,
        [parameter(Mandatory)]
        [DbaInstance]$Destination,
        [PSCredential]$DestinationSqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [object[]]$ExcludeDatabase,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        <#
            1804890536 = Enterprise
            1872460670 = Enterprise Edition: Core-based Licensing
            610778273 = Enterprise Evaluation
            284895786 = Business Intelligence
            -2117995310 = Developer
            -1592396055 = Express
            -133711905= Express with Advanced Services
            -1534726760 = Standard
            1293598313 = Web
            1674378470 = SQL Database
        #>

        $editions = @{
            "Enterprise" = 10;
            "Developer"  = 10;
            "Evaluation" = 10;
            "Standard"   = 5;
            "Express"    = 1
        }
        $notesCanMigrate = "Database can be migrated."
        $notesCannotMigrate = "Database cannot be migrated."
    }
    process {
        try {
            $sourceServer = Connect-SqlInstance -SqlInstance $Source -SqlCredential $SourceSqlCredential
        } catch {
            Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $Source -Continue
        }

        try {
            $destServer = Connect-SqlInstance -SqlInstance $Destination -SqlCredential $DestinationSqlCredential
        } catch {
            Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $Destination -Continue
        }

        if (-Not $Database) {
            $Database = $sourceServer.Databases | Where-Object IsSystemObject -eq 0 | Select-Object Name, Status
        }

        if ($ExcludeDatabase) {
            $Database = $sourceServer.Databases | Where-Object Name -NotIn $ExcludeDatabase
        }

        if ($Database.Count -gt 0) {
            if ($Database -in @("master", "msdb", "tempdb")) {
                Stop-Function -Message "Migrating system databases is not currently supported."
                return
            }

            if ($sourceServer.VersionMajor -lt 9 -and $destServer.VersionMajor -gt 10) {
                Stop-Function -Message "Sql Server 2000 databases cannot be migrated to SQL Server version 2012 and above. Quitting."
                return
            }

            if ($sourceServer.Collation -ne $destServer.Collation) {
                Write-Message -Level Warning -Message "Collation on $Source, $($sourceServer.collation) differs from the $Destination, $($destServer.collation)."
            }

            if ($sourceServer.VersionMajor -gt $destServer.VersionMajor) {
                #indicate they must use 'Generate Scripts' and 'Export Data' options?
                Stop-Function -Message "You can't migrate databases from a higher version to a lower one. Quitting."
                return
            }

            if ($sourceServer.VersionMajor -lt 10) {
                Stop-Function -Message "This function does not support versions lower than SQL Server 2008 (v10)"
                return
            }

            #if editions differs, from higher to lower one, verify the sys.dm_db_persisted_sku_features - only available from SQL 2008 +
            if (($sourceServer.VersionMajor -ge 10 -and $destServer.VersionMajor -ge 10)) {
                foreach ($db in $Database) {
                    if ([string]::IsNullOrEmpty($db.Status)) {
                        $dbstatus = ($sourceServer.Databases | Where-Object Name -eq $db).Status.ToString()
                        $dbName = $db
                    } else {
                        $dbstatus = $db.Status.ToString()
                        $dbName = $db.Name
                    }

                    Write-Message -Level Verbose -Message "Checking database '$dbName'."

                    if ($dbstatus.Contains("Offline") -eq $false -or $db.IsAccessible -eq $true) {

                        [long]$destVersionNumber = $($destServer.VersionString).Replace(".", "")
                        [string]$sourceVersion = "$($sourceServer.Edition) $($sourceServer.ProductLevel) ($($sourceServer.Version))"
                        [string]$destVersion = "$($destServer.Edition) $($destServer.ProductLevel) ($($destServer.Version))"
                        [string]$dbFeatures = ""

                        #Check if database has any FILESTREAM filegroup
                        Write-Message -Level Verbose -Message "Checking if FileStream is in use for database '$dbName'."
                        if ($sourceServer.Databases[$dbName].FileGroups | Where-Object FileGroupType -eq 'FileStreamDataFileGroup') {
                            Write-Message -Level Verbose -Message "Found FileStream filegroup and files."
                            $fileStreamSource = Get-DbaSpConfigure -SqlInstance $sourceServer -ConfigName FilestreamAccessLevel
                            $fileStreamDestination = Get-DbaSpConfigure -SqlInstance $destServer -ConfigName FilestreamAccessLevel

                            if ($fileStreamSource.RunningValue -ne $fileStreamDestination.RunningValue) {
                                [pscustomobject]@{
                                    SourceInstance      = $sourceServer.Name
                                    DestinationInstance = $destServer.Name
                                    SourceVersion       = $sourceVersion
                                    DestinationVersion  = $destVersion
                                    Database            = $dbName
                                    FeaturesInUse       = $dbFeatures
                                    IsMigratable        = $false
                                    Notes               = "$notesCannotMigrate. Destination server dones not have the 'FilestreamAccessLevel' configuration (RunningValue: $($fileStreamDestination.RunningValue)) equal to source server (RunningValue: $($fileStreamSource.RunningValue))."
                                }
                                Continue
                            }
                        }

                        try {
                            $sql = "SELECT feature_name FROM sys.dm_db_persisted_sku_features"

                            $skuFeatures = $sourceServer.Query($sql, $dbName)

                            Write-Message -Level Verbose -Message "Checking features in use..."

                            if (@($skuFeatures).Count -gt 0) {
                                foreach ($row in $skuFeatures) {
                                    $dbFeatures += ",$($row["feature_name"])"
                                }

                                $dbFeatures = $dbFeatures.TrimStart(",")
                            }
                        } catch {
                            Stop-Function -Message "Issue collecting sku features." -ErrorRecord $_ -Target $sourceServer -Continue
                        }

                        #If SQL Server 2016 SP1 (13.0.4001.0) or higher
                        if ($destVersionNumber -ge 13040010) {
                            <#
                                Need to verify if Edition = EXPRESS and database uses 'Change Data Capture' (CDC)
                                This means that database cannot be migrated because Express edition doesn't have SQL Server Agent
                            #>
                            if ($editions.Item($destServer.Edition.ToString().Split(" ")[0]) -eq 1 -and $dbFeatures.Contains("ChangeCapture")) {
                                [pscustomobject]@{
                                    SourceInstance      = $sourceServer.Name
                                    DestinationInstance = $destServer.Name
                                    SourceVersion       = $sourceVersion
                                    DestinationVersion  = $destVersion
                                    Database            = $dbName
                                    FeaturesInUse       = $dbFeatures
                                    IsMigratable        = $false
                                    Notes               = "$notesCannotMigrate. Destination server edition is EXPRESS which does not support 'ChangeCapture' feature that is in use."
                                }
                            } else {
                                [pscustomobject]@{
                                    SourceInstance      = $sourceServer.Name
                                    DestinationInstance = $destServer.Name
                                    SourceVersion       = $sourceVersion
                                    DestinationVersion  = $destVersion
                                    Database            = $dbName
                                    FeaturesInUse       = $dbFeatures
                                    IsMigratable        = $true
                                    Notes               = $notesCanMigrate
                                }
                            }
                        }
                        #Version is lower than SQL Server 2016 SP1
                        else {
                            Write-Message -Level Verbose -Message "Source Server Edition: $($sourceServer.Edition) (Weight: $($editions.Item($sourceServer.Edition.ToString().Split(" ")[0])))"
                            Write-Message -Level Verbose -Message "Destination Server Edition: $($destServer.Edition) (Weight: $($editions.Item($destServer.Edition.ToString().Split(" ")[0])))"

                            #Check for editions. If destination edition is lower than source edition and exists features in use
                            if (($editions.Item($destServer.Edition.ToString().Split(" ")[0]) -lt $editions.Item($sourceServer.Edition.ToString().Split(" ")[0])) -and (!([string]::IsNullOrEmpty($dbFeatures)))) {
                                [pscustomobject]@{
                                    SourceInstance      = $sourceServer.Name
                                    DestinationInstance = $destServer.Name
                                    SourceVersion       = $sourceVersion
                                    DestinationVersion  = $destVersion
                                    Database            = $dbName
                                    FeaturesInUse       = $dbFeatures
                                    IsMigratable        = $false
                                    Notes               = "$notesCannotMigrate There are features in use not available on destination instance."
                                }
                            }
                            #
                            else {
                                [pscustomobject]@{
                                    SourceInstance      = $sourceServer.Name
                                    DestinationInstance = $destServer.Name
                                    SourceVersion       = $sourceVersion
                                    DestinationVersion  = $destVersion
                                    Database            = $dbName
                                    FeaturesInUse       = $dbFeatures
                                    IsMigratable        = $true
                                    Notes               = $notesCanMigrate
                                }
                            }
                        }
                    } else {
                        Write-Message -Level Warning -Message "Database '$dbName' is offline or not accessible. Bring database online and re-run the command."
                    }
                }
            } else {
                #SQL Server 2005 or under
                Write-Message -Level Warning -Message "This validation will not be made on versions lower than SQL Server 2008 (v10)."
                Write-Message -Level Verbose -Message "Source server version: $($sourceServer.VersionMajor)."
                Write-Message -Level Verbose -Message "Destination server version: $($destServer.VersionMajor)."
            }
        } else {
            Write-Message -Level Output -Message "There are no databases to validate."
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Test-SqlMigrationConstraint
    }
}

tools\dbatools\functions\Test-DbaNetworkLatency.ps1

function Test-DbaNetworkLatency {
    <#
    .SYNOPSIS
        Tests how long a query takes to return from SQL Server

    .DESCRIPTION
        This function is intended to help measure SQL Server network latency by establishing a connection and executing a simple query. This is a better than a simple ping because it actually creates the connection to the SQL Server and measures the time required for only the entire routine, but the duration of the query as well how long it takes for the results to be returned.

        By default, this command will execute "SELECT TOP 100 * FROM INFORMATION_SCHEMA.TABLES" three times. It will then output how long the entire connection and command took, as well as how long *only* the execution of the command took.

        This allows you to see if the issue is with the connection or the SQL Server itself.

    .PARAMETER SqlInstance
        The SQL Server you want to run the test on.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Query
        Specifies the query to be executed. By default, "SELECT TOP 100 * FROM INFORMATION_SCHEMA.TABLES" will be executed on master. To execute in other databases, use fully qualified object names.

    .PARAMETER Count
        Specifies how many times the query should be executed. By default, the query is executed three times.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Performance, Network
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Test-DbaNetworkLatency

    .EXAMPLE
        PS C:\> Test-DbaNetworkLatency -SqlInstance sqlserver2014a, sqlcluster

        Tests the round trip return of "SELECT TOP 100 * FROM INFORMATION_SCHEMA.TABLES" on sqlserver2014a and sqlcluster using Windows credentials.

    .EXAMPLE
        PS C:\> Test-DbaNetworkLatency -SqlInstance sqlserver2014a -SqlCredential $cred

        Tests the execution results return of "SELECT TOP 100 * FROM INFORMATION_SCHEMA.TABLES" on sqlserver2014a using SQL credentials.

    .EXAMPLE
        PS C:\> Test-DbaNetworkLatency -SqlInstance sqlserver2014a, sqlcluster, sqlserver -Query "select top 10 * from otherdb.dbo.table" -Count 10

        Tests the execution results return of "select top 10 * from otherdb.dbo.table" 10 times on sqlserver2014a, sqlcluster, and sqlserver using Windows credentials.

    #>
    [CmdletBinding()]
    [OutputType([System.Object[]])]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstance[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string]$Query = "select top 100 * from INFORMATION_SCHEMA.TABLES",
        [int]$Count = 3,
        [Alias('Silent')]
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $start = [System.Diagnostics.Stopwatch]::StartNew()
                $currentCount = 0
                try {
                    $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
                } catch {
                    Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
                }

                do {
                    if (++$currentCount -eq 1) {
                        $first = [System.Diagnostics.Stopwatch]::StartNew()
                    }
                    $null = $server.Query($query)
                    if ($currentCount -eq $count) {
                        $last = $first.Elapsed
                    }
                }
                while ($currentCount -lt $count)

                $end = $start.Elapsed
                $totalTime = $end.TotalMilliseconds
                $average = $totalTime / $count

                $totalWarm = $last.TotalMilliseconds
                if ($Count -eq 1) {
                    $averageWarm = $totalWarm
                } else {
                    $averageWarm = $totalWarm / $count
                }

                [PSCustomObject]@{
                    ComputerName     = $server.ComputerName
                    InstanceName     = $server.ServiceName
                    SqlInstance      = $server.DomainInstanceName
                    Count            = $count
                    Total            = [prettytimespan]::FromMilliseconds($totalTime)
                    Avg              = [prettytimespan]::FromMilliseconds($average)
                    ExecuteOnlyTotal = [prettytimespan]::FromMilliseconds($totalWarm)
                    ExecuteOnlyAvg   = [prettytimespan]::FromMilliseconds($averageWarm)
                    NetworkOnlyTotal = [prettytimespan]::FromMilliseconds($totalTime - $totalWarm)
                } | Select-DefaultView -Property ComputerName, InstanceName, SqlInstance, 'Count as ExecutionCount', Total, 'Avg as Average', ExecuteOnlyTotal, 'ExecuteOnlyAvg as ExecuteOnlyAverage', NetworkOnlyTotal #backwards compat
            } catch {
                Stop-Function -Message "Error occurred testing dba network latency: $_" -ErrorRecord $_ -Continue -Target $instance
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Test-SqlNetworkLatency
    }
}

tools\dbatools\functions\Set-DbaDbCompatibility.ps1

function Set-DbaDbCompatibility {
    <#
    .SYNOPSIS
        Sets the compatibility level for SQL Server databases.

    .DESCRIPTION
        Sets the current database compatibility level for all databases on a server or list of databases passed in to the function.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        SqlCredential object used to connect to the SQL Server as a different user.

    .PARAMETER Database
        The database or databases to process. If unspecified, all databases will be processed.

    .PARAMETER TargetCompatibility
        The target compatibility level version. This is an int and follows Microsoft's versioning:

        9 = SQL Server 2005
        10 = SQL Server 2008
        11 = SQL Server 2012
        12 = SQL Server 2014
        13 = SQL Server 2016
        14 = SQL Server 2017
        15 = SQL Server 2019

    .PARAMETER InputObject
        A collection of databases (such as returned by Get-DbaDatabase)

    .PARAMETER WhatIf
        Shows what would happen if the command were to run

    .PARAMETER Confirm
        Prompts for confirmation of every step. For example:

        Are you sure you want to perform this action?
        Performing the operation "Update database" on target "pubs on SQL2016\VNEXT".
        [Y] Yes  [A] Yes to All  [N] No  [L] No to All  [S] Suspend  [?] Help (default is "Y"):

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Compatibility, Database
        Author: Garry Bargsley, http://blog.garrybargsley.com/

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Set-DbaDbCompatibility

    .EXAMPLE
        PS C:\> Set-DbaDbCompatibility -SqlInstance localhost\sql2017

        Changes database compatibility level for all user databases on server localhost\sql2017 that have a Compatibility level that do not match

    .EXAMPLE
        PS C:\> Set-DbaDbCompatibility -SqlInstance localhost\sql2017 -TargetCompatibility 12

        Changes database compatibility level for all user databases on server localhost\sql2017 to Version120

    .EXAMPLE
        PS C:\> Set-DbaDbCompatibility -SqlInstance localhost\sql2017 -Database Test -TargetCompatibility 12

        Changes database compatibility level for database Test on server localhost\sql2017 to Version 120
    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$Database,
        [ValidateSet(9, 10, 11, 12, 13, 14, 15)]
        [int]$TargetCompatibility,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Database[]]$InputObject,
        [switch]$EnableException
    )
    process {

        if (Test-Bound -not 'SqlInstance', 'InputObject') {
            Write-Message -Level Warning -Message "You must specify either a SQL instance or pipe a database collection"
            continue
        }

        if ($SqlInstance) {
            $InputObject += Get-DbaDatabase -SqlInstance $SqlInstance -SqlCredential $SqlCredential -Database $Database
        }

        foreach ($db in $InputObject) {
            $server = $db.Parent
            $ServerVersion = $server.VersionMajor
            Write-Message -Level Verbose -Message "SQL Server is using Version: $ServerVersion"

            $ogcompat = $db.CompatibilityLevel
            $dbversion = switch ($ogcompat) {
                "Version100" { 10 } # SQL Server 2008
                "Version110" { 11 } # SQL Server 2012
                "Version120" { 12 } # SQL Server 2014
                "Version130" { 13 } # SQL Server 2016
                "Version140" { 14 } # SQL Server 2017
                "Version150" { 15 } # SQL Server 2019
                default { 9 } # SQL Server 2005
            }

            if (-not $TargetCompatibility) {
                if ($dbversion -lt $ServerVersion) {
                    If ($Pscmdlet.ShouldProcess($server.Name, "Updating $db version from $dbversion to $ServerVersion")) {
                        $comp = $ServerVersion * 10
                        $sql = "ALTER DATABASE $db SET COMPATIBILITY_LEVEL = $comp"
                        try {
                            $db.ExecuteNonQuery($sql)
                            $db.Refresh()
                            Get-DbaDbCompatibility -SqlInstance $server -Database $db.Name
                        } catch {
                            Stop-Function -Message "Failed to change Compatibility Level" -ErrorRecord $_ -Target $instance -Continue
                        }
                    }
                }
            } else {
                if ($Pscmdlet.ShouldProcess($server.Name, "Updating $db version from $dbversion to $TargetCompatibility")) {
                    $comp = $TargetCompatibility * 10
                    $sql = "ALTER DATABASE $db SET COMPATIBILITY_LEVEL = $comp"
                    try {
                        $db.ExecuteNonQuery($sql)
                        $db.Refresh()
                        Get-DbaDbCompatibility -SqlInstance $server -Database $db.Name
                    } catch {
                        Stop-Function -Message "Failed to change Compatibility Level" -ErrorRecord $_ -Target $instance -Continue
                    }
                }
            }
        }
    }
}

tools\dbatools\functions\Set-DbaCmConnection.ps1

function Set-DbaCmConnection {
    <#
    .SYNOPSIS
        Configures a connection object for use in remote computer management.

    .DESCRIPTION
        Configures a connection object for use in remote computer management.
        This function will either create new records for computers that have no connection registered so far, or it will configure existing connections if already present.

        As such it can be handy in making bulk-edits on connections or manually adjusting some settings.

    .PARAMETER ComputerName
        The computer to build the connection object for.

    .PARAMETER Credential
        The credential to register.

    .PARAMETER UseWindowsCredentials
        Whether using the default windows credentials is legit.
        Not setting this will not exclude using windows credentials, but only not pre-confirm them as working.

    .PARAMETER OverrideExplicitCredential
        Setting this will enable the credential override.
        The override will cause the system to ignore explicitly specified credentials, so long as known, good credentials are available.

    .PARAMETER OverrideConnectionPolicy
        Setting this will configure the connection policy override.
        By default, global configurations enforce, which connection type is available at all and which is disabled.

    .PARAMETER DisabledConnectionTypes
        Explicitly disable connection types.
        These types will then not be used for connecting to the computer.

    .PARAMETER DisableBadCredentialCache
        Will prevent the caching of credentials if set to true.

    .PARAMETER DisableCimPersistence
        Will prevent Cim-Sessions to be reused.

    .PARAMETER DisableCredentialAutoRegister
        Will prevent working credentials from being automatically cached

    .PARAMETER EnableCredentialFailover
        Will enable automatic failing over to known to work credentials, when using bad credentials.
        By default, passing bad credentials will cause the Computer Management functions to interrupt with a warning (Or exception if in silent mode).

    .PARAMETER WindowsCredentialsAreBad
        Will prevent the windows credentials of the currently logged on user from being used for the remote connection.

    .PARAMETER CimWinRMOptions
        Specify a set of options to use when connecting to the target computer using CIM over WinRM.
        Use 'New-CimSessionOption' to create such an object.

    .PARAMETER CimDCOMOptions
        Specify a set of options to use when connecting to the target computer using CIM over DCOM.
        Use 'New-CimSessionOption' to create such an object.

    .PARAMETER AddBadCredential
        Adds credentials to the bad credential cache.
        These credentials will not be used when connecting to the target remote computer.

    .PARAMETER RemoveBadCredential
        Removes credentials from the bad credential cache.

    .PARAMETER ClearBadCredential
        Clears the cache of credentials that didn't worked.
        Will be applied before adding entries to the credential cache.

    .PARAMETER ClearCredential
        Clears the cache of credentials that worked.
        Will be applied before adding entries to the credential cache.

    .PARAMETER ResetCredential
        Resets all credential-related caches:
        - Clears bad credential cache
        - Removes last working credential
        - Un-Confirms the windows credentials as working
        - Un-Confirms the windows credentials as not working

        Automatically implies the parameters -ClearCredential and -ClearBadCredential. Using them together is redundant.
        Will be applied before adding entries to the credential cache.

    .PARAMETER ResetConnectionStatus
        Restores all connection status to default, as if no connection protocol had ever been tested.

    .PARAMETER ResetConfiguration
        Restores the configuration back to system default.
        Configuration elements are the basic behavior controlling settings, such as whether to cache bad credentials, etc.
        These can be configured globally using the dbatools configuration system and overridden locally on a per-connection basis.
        For a list of all available settings, use "Get-DbatoolsConfig -Module ComputerManagement".

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: ComputerManagement, CIM
        Author: Friedrich Weinmann (@FredWeinmann)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/set-DbaCmConnection

    .EXAMPLE
        PS C:\> Get-DbaCmConnection sql2014 | Set-DbaCmConnection -ClearBadCredential -UseWindowsCredentials

        Retrieves the already existing connection to sql2014, removes the list of not working credentials and configures it to default to the credentials of the logged on user.

    .EXAMPLE
        PS C:\> Get-DbaCmConnection | Set-DbaCmConnection -RemoveBadCredential $cred

        Removes the credentials stored in $cred from all connections' list of "known to not work" credentials.
        Handy to update changes in privilege.

    .EXAMPLE
        PS C:\> Get-DbaCmConnection | Export-Clixml .\connections.xml
        PS C:\> Import-Clixml .\connections.xml | Set-DbaCmConnection -ResetConfiguration

        At first, the current cached connections are stored in an xml file. At a later time - possibly in the profile when starting the console again - those connections are imported again and applied again to the connection cache.

        In this example, the configuration settings will also be reset, since after re-import those will be set to explicit, rather than deriving them from the global settings.
        In many cases, using the default settings is desirable. For specific settings, use New-DbaCmConnection as part of the profile in order to explicitly configure a connection.

    #>
    [CmdletBinding(SupportsShouldProcess, DefaultParameterSetName = 'Credential')]
    param (
        [Parameter(ValueFromPipeline)]
        [Sqlcollaborative.Dbatools.Parameter.DbaCmConnectionParameter[]]
        $ComputerName = $env:COMPUTERNAME,

        [Parameter(ParameterSetName = "Credential")]
        [PSCredential]
        $Credential,

        [Parameter(ParameterSetName = "Windows")]
        [switch]
        $UseWindowsCredentials,

        [switch]
        $OverrideExplicitCredential,

        [switch]
        $OverrideConnectionPolicy,

        [Sqlcollaborative.Dbatools.Connection.ManagementConnectionType]
        $DisabledConnectionTypes = 'None',

        [switch]
        $DisableBadCredentialCache,

        [switch]
        $DisableCimPersistence,

        [switch]
        $DisableCredentialAutoRegister,

        [switch]
        $EnableCredentialFailover,

        [Parameter(ParameterSetName = "Credential")]
        [switch]
        $WindowsCredentialsAreBad,

        [Microsoft.Management.Infrastructure.Options.WSManSessionOptions]
        $CimWinRMOptions,

        [Microsoft.Management.Infrastructure.Options.DComSessionOptions]
        $CimDCOMOptions,

        [System.Management.Automation.PSCredential[]]
        $AddBadCredential,

        [System.Management.Automation.PSCredential[]]
        $RemoveBadCredential,

        [switch]
        $ClearBadCredential,

        [switch]
        $ClearCredential,

        [switch]
        $ResetCredential,

        [switch]
        $ResetConnectionStatus,

        [switch]
        $ResetConfiguration,

        [switch]
        [Alias('Silent')]$EnableException
    )

    begin {
        Write-Message -Level InternalComment -Message "Starting execution"
        Write-Message -Level Verbose -Message "Bound parameters: $($PSBoundParameters.Keys -join ", ")"

        $disable_cache = Get-DbatoolsConfigValue -Name 'ComputerManagement.Cache.Disable.All' -Fallback $false
    }
    process {
        foreach ($connectionObject in $ComputerName) {
            if ($Pscmdlet.ShouldProcess($($connectionObject.Connection.ComputerName), "Setting Connection")) {
                if (-not $connectionObject.Success) { Stop-Function -Message "Failed to interpret computername input: $($connectionObject.InputObject)" -Category InvalidArgument -Target $connectionObject.InputObject -Continue }
                Write-Message -Level VeryVerbose -Message "Processing computer: $($connectionObject.Connection.ComputerName)"

                $connection = $connectionObject.Connection

                if ($ResetConfiguration) {
                    Write-Message -Level Verbose -Message "Resetting the configuration to system default"

                    $connection.RestoreDefaultConfiguration()
                }

                if ($ResetConnectionStatus) {
                    Write-Message -Level Verbose -Message "Resetting the connection status"

                    $connection.CimRM = 'Unknown'
                    $connection.CimDCOM = 'Unknown'
                    $connection.Wmi = 'Unknown'
                    $connection.PowerShellRemoting = 'Unknown'

                    $connection.LastCimRM = New-Object System.DateTime(0)
                    $connection.LastCimDCOM = New-Object System.DateTime(0)
                    $connection.LastWmi = New-Object System.DateTime(0)
                    $connection.LastPowerShellRemoting = New-Object System.DateTime(0)
                }

                if ($ResetCredential) {
                    Write-Message -Level Verbose -Message "Resetting credentials"

                    $connection.KnownBadCredentials.Clear()
                    $connection.Credentials = $null
                    $connection.UseWindowsCredentials = $false
                    $connection.WindowsCredentialsAreBad = $false
                } else {
                    if ($ClearBadCredential) {
                        Write-Message -Level Verbose -Message "Clearing bad credentials"

                        $connection.KnownBadCredentials.Clear()
                        $connection.WindowsCredentialsAreBad = $false
                    }

                    if ($ClearCredential) {
                        Write-Message -Level Verbose -Message "Clearing credentials"

                        $connection.Credentials = $null
                        $connection.UseWindowsCredentials = $false
                    }
                }

                foreach ($badCred in $RemoveBadCredential) {
                    $connection.RemoveBadCredential($badCred)
                }

                foreach ($badCred in $AddBadCredential) {
                    $connection.AddBadCredential($badCred)
                }

                if (Test-Bound "Credential") { $connection.Credentials = $Credential }
                if ($UseWindowsCredentials) {
                    $connection.Credentials = $null
                    $connection.UseWindowsCredentials = $UseWindowsCredentials
                }
                if (Test-Bound "OverrideExplicitCredential") { $connection.OverrideExplicitCredential = $OverrideExplicitCredential }
                if (Test-Bound "DisabledConnectionTypes") { $connection.DisabledConnectionTypes = $DisabledConnectionTypes }
                if (Test-Bound "DisableBadCredentialCache") { $connection.DisableBadCredentialCache = $DisableBadCredentialCache }
                if (Test-Bound "DisableCimPersistence") { $connection.DisableCimPersistence = $DisableCimPersistence }
                if (Test-Bound "DisableCredentialAutoRegister") { $connection.DisableCredentialAutoRegister = $DisableCredentialAutoRegister }
                if (Test-Bound "EnableCredentialFailover") { $connection.DisableCredentialAutoRegister = $EnableCredentialFailover }
                if (Test-Bound "WindowsCredentialsAreBad") { $connection.WindowsCredentialsAreBad = $WindowsCredentialsAreBad }
                if (Test-Bound "CimWinRMOptions") { $connection.CimWinRMOptions = $CimWinRMOptions }
                if (Test-Bound "CimDCOMOptions") { $connection.CimDCOMOptions = $CimDCOMOptions }
                if (Test-Bound "OverrideConnectionPolicy") { $connection.OverrideConnectionPolicy = $OverrideConnectionPolicy }

                if (-not $disable_cache) {
                    Write-Message -Level Verbose -Message "Writing connection to cache"
                    [Sqlcollaborative.Dbatools.Connection.ConnectionHost]::Connections[$connectionObject.Connection.ComputerName] = $connection
                } else { Write-Message -Level Verbose -Message "Skipping writing to cache, since the cache has been disabled!" }
                $connection
            }
        }
    }
    end {
        Write-Message -Level InternalComment -Message "Stopping execution"
    }
}

tools\dbatools\functions\Test-DbaPowerPlan.ps1

function Test-DbaPowerPlan {
    <#
    .SYNOPSIS
        Checks the Power Plan settings for compliance with best practices, which recommend High Performance for SQL Server.

    .DESCRIPTION
        Checks the Power Plan settings on a computer against best practices recommendations. If one server is checked, only $true or $false is returned. If multiple servers are checked, each server's name and an isBestPractice field are returned.

        References:
        https://support.microsoft.com/en-us/kb/2207548
        http://www.sqlskills.com/blogs/glenn/windows-power-plan-effects-on-newer-intel-processors/

    .PARAMETER ComputerName
        The server(s) to check Power Plan settings on.

    .PARAMETER Credential
        Specifies a PSCredential object to use in authenticating to the server(s), instead of the current user account.

    .PARAMETER CustomPowerPlan
        If your organization uses a custom power plan that's considered best practice, specify it here.

    .PARAMETER Detailed
        Output all properties, will be deprecated in 1.0.0 release.

    .PARAMETER InputObject
        Enables piping from Get-DbaPowerPlan

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: PowerPlan
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Test-DbaPowerPlan

    .EXAMPLE
        PS C:\> Test-DbaPowerPlan -ComputerName sqlserver2014a

        Checks the Power Plan settings for sqlserver2014a and indicates whether or not it complies with best practices.

    .EXAMPLE
        PS C:\> Test-DbaPowerPlan -ComputerName sqlserver2014a -CustomPowerPlan 'Maximum Performance'

        Checks the Power Plan settings for sqlserver2014a and indicates whether or not it is set to the custom plan "Maximum Performance".

       #>
    param (
        [parameter(ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "SqlInstance")]
        [DbaInstance[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [string]$CustomPowerPlan,
        [parameter(ValueFromPipeline)]
        [pscustomobject]$InputObject,
        [switch]$Detailed,
        [switch]$EnableException
    )

    begin {
        Test-DbaDeprecation -DeprecatedOn 1.0.0 -Parameter Detailed

        $bpPowerPlan = [PSCustomObject]@{
            InstanceID  = '8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
            ElementName = $null
        }
    }

    process {
        if (Test-Bound -ParameterName ComputerName) {
            $InputObject += Get-DbaPowerPlan -ComputerName $ComputerName -Credential $Credential
        }

        foreach ($powerPlan in $InputObject) {
            $computer = $powerPlan.ComputerName
            $Credential = $powerPlan.Credential

            $server = Resolve-DbaNetworkName -ComputerName $computer -Credential $Credential

            $computerResolved = $server.FullComputerName

            if (-not $computerResolved) {
                Stop-Function -Message "Couldn't resolve hostname. Skipping." -Continue
            }

            $splatDbaCmObject = @{
                ComputerName    = $computerResolved
                EnableException = $true
            }

            if (Test-Bound "Credential") {
                $splatDbaCmObject["Credential"] = $Credential
            }

            Write-Message -Level Verbose -Message "Getting Power Plan information from $computer."

            try {
                $powerPlans = Get-DbaCmObject @splatDbaCmObject -ClassName Win32_PowerPlan -Namespace "root\cimv2\power" | Select-Object ElementName, InstanceId, IsActive
            } catch {
                if ($_.Exception -match "namespace") {
                    Stop-Function -Message "Can't get Power Plan Info for $computer. Unsupported operating system." -Continue -ErrorRecord $_ -Target $computer
                } else {
                    Stop-Function -Message "Can't get Power Plan Info for $computer. Check logs for more details." -Continue -ErrorRecord $_ -Target $computer
                }
            }

            $powerPlan = $powerPlans | Where-Object IsActive -eq 'True' | Select-Object ElementName, InstanceID
            $powerPlan.InstanceID = $powerPlan.InstanceID.Split('{')[1].Split('}')[0]

            if ($null -eq $powerPlan.InstanceID) {
                $powerPlan.ElementName = "Unknown"
            }
            if ($CustomPowerPlan) {
                $bpPowerPlan.ElementName = $CustomPowerPlan
                $bpPowerPlan.InstanceID = $($powerPlans | Where-Object {
                        $_.ElementName -eq $CustomPowerPlan
                    }).InstanceID
            } else {
                $bpPowerPlan.ElementName = $($powerPlans | Where-Object {
                        $_.InstanceID.Split('{')[1].Split('}')[0] -eq $bpPowerPlan.InstanceID
                    }).ElementName
                if ($null -eq $bpPowerplan.ElementName) {
                    $bpPowerPlan.ElementName = "You do not have the high performance plan installed on this machine."
                }
            }

            Write-Message -Level Verbose -Message "Recommended GUID is $($bpPowerPlan.InstanceID) and you have $($powerPlan.InstanceID)."

            if ($null -eq $powerPlan.InstanceID) {
                $powerPlan.ElementName = "Unknown"
            }

            if ($powerPlan.InstanceID -eq $bpPowerPlan.InstanceID) {
                $isBestPractice = $true
            } else {
                $isBestPractice = $false
            }

            [PSCustomObject]@{
                ComputerName         = $computer
                ActivePowerPlan      = $powerPlan.ElementName
                RecommendedPowerPlan = $bpPowerPlan.ElementName
                isBestPractice       = $isBestPractice
                Credential           = $Credential
            } | Select-DefaultView -ExcludeProperty Credential
        }
    }
}

tools\dbatools\functions\Test-DbaRepLatency.ps1

function Test-DbaRepLatency {
    <#
    .SYNOPSIS
        Displays replication latency for all transactional publications for a server or database.

    .DESCRIPTION
        Creates tracer tokens to determine latency between the publisher/distributor and the distributor/subscriber
        for all transactional publications for a server, database, or publication.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER Database
        The database(s) to process. If unspecified, all databases will be processed.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER PublicationName
        The publication(s) to process. If unspecified, all publications will be processed.

    .PARAMETER TimeToLive
        How long, in seconds, to wait for a tracer token to complete its journey from the publisher to the subscriber.
        If unspecified, all tracer tokens will take as long as they need to process results.

    .PARAMETER RetainToken
        Retains the tracer tokens created for each publication. If unspecified, all tracer tokens created will be discarded.

    .PARAMETER DisplayTokenHistory
        Displays all tracer tokens in each publication. If unspecified, the current tracer token created will be only token displayed.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Replication
        Author: Colin Douglas

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Test-DbaRepLatency

    .EXAMPLE
        PS C:\> Test-DbaRepLatency -SqlInstance sql2008, sqlserver2012

        Return replication latency for all transactional publications for servers sql2008 and sqlserver2012.

    .EXAMPLE
        PS C:\> Test-DbaRepLatency -SqlInstance sql2008 -Database TestDB

        Return replication latency for all transactional publications on server sql2008 for only the TestDB database

    .EXAMPLE
        PS C:\> Test-DbaRepLatency -SqlInstance sql2008 -Database TestDB -PublicationName TestDB_Pub

        Return replication latency for the TestDB_Pub publication for the TestDB database located on the server sql2008.

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [DbaInstanceParameter[]] $SqlInstance, #Publisher
        [object[]]$Database,
        [PSCredential]$SqlCredential,
        [object[]]$PublicationName,
        [int]$TimeToLive,
        [switch]$RetainToken,
        [switch]$DisplayTokenHistory,
        [switch]$EnableException
    )

    process {

        foreach ($instance in $SqlInstance) {


            # Connect to the publisher
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $publicationNames = Get-DbaRepPublication -SqlInstance $server -Database $Database -SqlCredential $SqlCredentials -PublicationType "Transactional"

            if ($PublicationName) {
                $publicationNames = $publicationNames | Where-Object PublicationName -in $PublicationName
            }


            foreach ($publication in $publicationNames) {

                # Create an instance of TransPublication
                $transPub = New-Object Microsoft.SqlServer.Replication.TransPublication

                $transPub.Name = $publication.PublicationName
                $transPub.DatabaseName = $publication.Database

                # Set the Name and DatabaseName properties for the publication, and set the ConnectionContext property to the connection created in step 1.
                $transPub.ConnectionContext = $server.ConnectionContext.SqlConnectionObject

                # Call the LoadProperties method to get the properties of the object. If this method returns false, either the publication properties in Step 3 were defined incorrectly or the publication does not exist.
                if (!$transPub.LoadProperties()) {
                    Stop-Function -Message "LoadProperties() failed. The publication does not exist." -Continue
                }

                # Call the PostTracerToken method. This method inserts a tracer token into the publication's Transaction log.
                $transPub.PostTracerToken() | Out-Null
            }

            ##################################################################################
            ### Determine Latency and validate connections for a transactional publication ###
`           ##################################################################################

            $repServer = New-Object Microsoft.SqlServer.Replication.ReplicationServer

            # Set the Name and DatabaseName properties for the Replication Server, and set the ConnectionContext property to the connection created in step 1.
            $repServer.ConnectionContext = $server.ConnectionContext.SqlConnectionObject

            $distributionServer = $repServer.DistributionServer
            $distributionDatabase = $repServer.DistributionDatabase

            # Step 1: Connect to the distributor

            try {
                $distServer = Connect-SqlInstance -SqlInstance $DistributionServer -SqlCredential $SqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $DistributionServer -Continue
            }

            foreach ($publication in $publicationNames) {

                $pubMon = New-Object Microsoft.SqlServer.Replication.PublicationMonitor

                $pubMon.Name = $publication.PublicationName
                $pubMon.DistributionDBName = $distributionDatabase
                $pubMon.PublisherName = $publication.Server
                $pubMon.PublicationDBName = $publication.Database

                $pubMon.ConnectionContext = $distServer.ConnectionContext.SqlConnectionObject;


                # Call the LoadProperties method to get the properties of the object. If this method returns false, either the publication monitor properties in Step 3 were defined incorrectly or the publication does not exist.
                if (!$pubMon.LoadProperties()) {
                    Stop-Function -Message "LoadProperties() failed. The publication does not exist." -Continue
                }

                $tokenList = $pubMon.EnumTracerTokens()

                if (!$DisplayTokenHistory) {
                    $tokenList = $tokenList[0]
                }


                foreach ($token in $tokenList) {

                    $tracerTokenId = $token.TracerTokenId

                    $tokenInfo = $pubMon.EnumTracerTokenHistory($tracerTokenId)

                    $timer = 0

                    $continue = $true

                    while (($tokenInfo.Tables[0].Rows[0].subscriber_latency -eq [System.DBNull]::Value) -and $continue ) {
                        if ($TimeToLive -and ($timer -gt $TimeToLive)) {
                            $continue = $false
                            Stop-Function -Message "TimeToLive has been reached for token: $tracerTokenId" -Continue
                        }

                        Start-Sleep -Seconds 1
                        $timer += 1
                        $tokenInfo = $PubMon.EnumTracerTokenHistory($tracerTokenId)
                    }


                    foreach ($info in $tokenInfo.Tables[0].Rows) {

                        $totalLatency = if (($info.distributor_latency -eq [System.DBNull]::Value) -or ($info.subscriber_latency -eq [System.DBNull]::Value)) {
                            [System.DBNull]::Value
                        } else {
                            ($info.distributor_latency + $info.subscriber_latency)
                        }

                        [PSCustomObject]@{
                            ComputerName                   = $server.ComputerName
                            InstanceName                   = $server.InstanceName
                            SqlInstance                    = $server.SqlInstance
                            TokenID                        = $tracerTokenId
                            TokenCreateDate                = $token.PublisherCommitTime
                            PublicationServer              = $publication.Server
                            PublicationDB                  = $publication.Database
                            PublicationName                = $publication.PublicationName
                            PublicationType                = $publication.PublicationType
                            DistributionServer             = $distributionServer
                            DistributionDB                 = $distributionDatabase
                            SubscriberServer               = $info.subscriber
                            SubscriberDB                   = $info.subscriber_db
                            PublisherToDistributorLatency  = $info.distributor_latency
                            DistributorToSubscriberLatency = $info.subscriber_latency
                            TotalLatency                   = $totalLatency
                        } | Select-DefaultView -ExcludeProperty PublicationType


                        if (!$RetainToken) {

                            $pubMon.CleanUpTracerTokenHistory($tracerTokenId)

                        }

                    }
                }
            }
        }
    }
}

tools\dbatools\functions\Set-DbaAvailabilityGroup.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Set-DbaAvailabilityGroup {
    <#
    .SYNOPSIS
        Sets availability group properties on a SQL Server instance.

    .DESCRIPTION
        Sets availability group properties on a SQL Server instance.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. Server version must be SQL Server version 2012 or higher.

    .PARAMETER SqlCredential
        Login to the SqlInstance instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER AvailabilityGroup
        Only set specific availability group properties.

    .PARAMETER AllAvailabilityGroups
        Set properties for all availability group on an instance.

    .PARAMETER DtcSupportEnabled
        Enables DtcSupport.

    .PARAMETER ClusterType
        Cluster type of the Availability Group. Only supported in SQL Server 2017 and above.
        Options include: External, Wsfc or None.

    .PARAMETER AutomatedBackupPreference
        Specifies how replicas in the primary role are treated in the evaluation to pick the desired replica to perform a backup.

    .PARAMETER FailureConditionLevel
        Specifies the different conditions that can trigger an automatic failover in Availability Group.

    .PARAMETER HealthCheckTimeout
        This setting used to specify the length of time, in milliseconds, that the SQL Server resource DLL should wait for information returned by the sp_server_diagnostics stored procedure before reporting the Always On Failover Cluster Instance (FCI) as unresponsive.

        Changes that are made to the timeout settings are effective immediately and do not require a restart of the SQL Server resource.

        Defaults is 30000 (30 seconds).

    .PARAMETER BasicAvailabilityGroup
        Indicates whether the availability group is basic. Basic availability groups like pumpkin spice and uggs.

        https://docs.microsoft.com/en-us/sql/database-engine/availability-groups/windows/basic-availability-groups-always-on-availability-groups

    .PARAMETER DatabaseHealthTrigger
        Indicates whether the availability group triggers the database health.

    .PARAMETER IsDistributedAvailabilityGroup
        Indicates whether the availability group is distributed.

    .PARAMETER InputObject
        Enables piping from Get-DbaAvailabilityGroup.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: AvailabilityGroup, HA, AG
        Author: Chrissy LeMaire (@cl), netnerds.net
        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Set-DbaAvailabilityGroup

    .EXAMPLE
        PS C:\> Get-DbaAvailabilityGroup -SqlInstance sql2016 | Set-DbaAvailabilityGroup -DtcSupportEnabled

        Enables DTC for all availability groups on sql2016

       .EXAMPLE
        PS C:\> Get-DbaAvailabilityGroup -SqlInstance sql2016 -AvailabilityGroup AG1 | Set-DbaAvailabilityGroup -DtcSupportEnabled:$false

        Disables DTC support for the availability group AG1

        .EXAMPLE
        PS C:\> Set-DbaAvailabilityGroup -SqlInstance sql2016 -AvailabilityGroup AG1 -DtcSupportEnabled:$false

        Disables DTC support for the availability group AG1
    #>

    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'Medium')]
    param (
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$AvailabilityGroup,
        [switch]$AllAvailabilityGroups,
        [switch]$DtcSupportEnabled,
        [ValidateSet('External', 'Wsfc', 'None')]
        [string]$ClusterType,
        [ValidateSet('None', 'Primary', 'Secondary', 'SecondaryOnly')]
        [string]$AutomatedBackupPreference,
        [ValidateSet('OnAnyQualifiedFailureCondition', 'OnCriticalServerErrors', 'OnModerateServerErrors', 'OnServerDown', 'OnServerUnresponsive')]
        [string]$FailureConditionLevel,
        [int]$HealthCheckTimeout,
        [switch]$BasicAvailabilityGroup,
        [switch]$DatabaseHealthTrigger,
        [switch]$IsDistributedAvailabilityGroup,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.AvailabilityGroup[]]$InputObject,
        [switch]$EnableException
    )
    process {
        if ((Test-Bound -ParameterName SqlInstance) -and (Test-Bound -Not -ParameterName AvailabilityGroup, AllAvailabilityGroups)) {
            Stop-Function -Message "You must specify AllAvailabilityGroups groups or AvailabilityGroups when using the SqlInstance parameter."
            return
        }
        if ($SqlInstance) {
            $InputObject += Get-DbaAvailabilityGroup -SqlInstance $SqlInstance -SqlCredential $SqlCredential -AvailabilityGroup $AvailabilityGroup
        }
        $props = "Name", "AutomatedBackupPreference", "BasicAvailabilityGroup", "ClusterType", "DatabaseHealthTrigger", "DtcSupportEnabled", "FailureConditionLevel", "HealthCheckTimeout", "IsDistributedAvailabilityGroup"

        foreach ($ag in $InputObject) {
            try {
                if ($Pscmdlet.ShouldProcess($ag.Parent.Name, "Seting properties on $ag")) {
                    foreach ($prop in $props) {
                        if (Test-Bound -ParameterName $prop) {
                            $ag.$prop = (Get-Variable -Name $prop -ValueOnly)
                        }
                    }
                    $ag.Alter()
                    $ag
                }
            } catch {
                Stop-Function -Message "Failure" -ErrorRecord $_ -Continue
            }
        }
    }
}

tools\dbatools\functions\Test-DbaSpn.ps1

#ValidationTags#FlowControl,Pipeline#
function Test-DbaSpn {
    <#
    .SYNOPSIS
        Test-DbaSpn will determine what SPNs *should* be set for a given server (and any instances of SQL running on it) and return
        whether the SPNs are set or not.

    .DESCRIPTION
        This function is designed to take in a server name(s) and attempt to determine required SPNs. It was initially written to mimic the (previously) broken functionality of the Microsoft Kerberos Configuration manager and SQL Server 2016.

        - For any instances with TCP/IP enabled, the script will determine which port(s) the instances are listening on and generate the required SPNs.
        - For named instances NOT using dynamic ports, the script will generate a port-based SPN for those instances as well.
        - At a minimum, the script will test a base, port-less SPN for each instance discovered.

        Once the required SPNs are generated, the script will connect to Active Directory and search for any of the SPNs (if any) that are already set. The function will return a custom object(s) that contains the server name checked, the instance name discovered, the account the service is running under, and what the "required" SPN should be. It will also return a boolean property indicating if the SPN is set in Active Directory or not.

    .PARAMETER ComputerName
        The computer you want to discover any SQL Server instances on. This parameter is required.

    .PARAMETER Credential
        The credential you want to use to connect to the remote server and active directory.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: SPN
        Author: Drew Furgiuele (@pittfurg), http://www.port1433.com | niphlod

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Test-DbaSpn

    .EXAMPLE
        Test-DbaSpn -ComputerName SQLSERVERA -Credential ad\sqldba

        Connects to a computer (SQLSERVERA) and queries WMI for all SQL instances and return "required" SPNs. It will then take each SPN it generates
        and query Active Directory to make sure the SPNs are set.

    .EXAMPLE
        Test-DbaSpn -ComputerName SQLSERVERA,SQLSERVERB -Credential ad\sqldba

        Connects to multiple computers (SQLSERVERA, SQLSERVERB) and queries WMI for all SQL instances and return "required" SPNs.
        It will then take each SPN it generates and query Active Directory to make sure the SPNs are set.

    .EXAMPLE
        Test-DbaSpn -ComputerName SQLSERVERC -Credential ad\sqldba

        Connects to a computer (SQLSERVERC) on a specified and queries WMI for all SQL instances and return "required" SPNs.
        It will then take each SPN it generates and query Active Directory to make sure the SPNs are set. Note that the credential you pass must have be a valid login with appropriate rights on the domain

    #>
    [cmdletbinding()]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseOutputTypeCorrectly", "", Justification = "PSSA Rule Ignored by BOH")]
    param (
        [Parameter(Mandatory, ValueFromPipeline)]
        [DbaInstance[]]$ComputerName,
        [PSCredential]$Credential,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {
        # spare the cmdlet to search for the same account over and over
        $resultCache = @{}
    }
    process {
        foreach ($computer in $ComputerName) {
            try {
                $resolved = Resolve-DbaNetworkName -ComputerName $computer.ComputerName -Credential $Credential -ErrorAction Stop
            } catch {
                $resolved = Resolve-DbaNetworkName -ComputerName $computer.ComputerName -Turbo
            }

            if ($null -eq $resolved.IPAddress) {
                Write-Message -Level Warning -Message "Cannot resolve IP address, moving on."
                continue
            }

            $hostEntry = $resolved.FullComputerName

            Write-Message -Message "Resolved ComputerName to FQDN: $hostEntry" -Level Verbose

            $Scriptblock = {

                function Convert-SqlVersion {
                    [cmdletbinding()]
                    param (
                        [version]$version
                    )

                    switch ($version.Major) {
                        9 { "SQL Server 2005" }
                        10 {
                            if ($version.Minor -eq 0) {
                                "SQL Server 2008"
                            } else {
                                "SQL Server 2008 R2"
                            }
                        }
                        11 { "SQL Server 2012" }
                        12 { "SQL Server 2014" }
                        13 { "SQL Server 2016" }
                        14 { "SQL Server 2017" }
                        default { $version }
                    }
                }

                $spns = @()
                $servereName = $args[0]
                $hostEntry = $args[1]
                $instanceName = $args[2]
                $instanceCount = $wmi.ServerInstances.Count

                <# DO NOT use Write-Message as this is inside of a script block #>
                Write-Verbose "Found $instanceCount instances"

                foreach ($instance in $wmi.ServerInstances) {
                    $spn = [pscustomobject] @{
                        ComputerName           = $servereName
                        InstanceName           = $instanceName
                        #SKUNAME
                        SqlProduct             = $null
                        InstanceServiceAccount = $null
                        RequiredSPN            = $null
                        IsSet                  = $false
                        Cluster                = $false
                        TcpEnabled             = $false
                        Port                   = $null
                        DynamicPort            = $false
                        Warning                = "None"
                        Error                  = "None"
                        # for piping
                        Credential             = $Credential
                    }

                    $spn.InstanceName = $instance.Name
                    $instanceName = $spn.InstanceName

                    <# DO NOT use Write-Message as this is inside of a script block #>
                    Write-Verbose "Parsing $instanceName"

                    $services = $wmi.Services | Where-Object DisplayName -EQ "SQL Server ($instanceName)"
                    $spn.InstanceServiceAccount = $services.ServiceAccount
                    $spn.Cluster = ($services.advancedproperties | Where-Object Name -EQ 'Clustered').Value

                    if ($spn.Cluster) {
                        $hostEntry = ($services.advancedproperties | Where-Object Name -EQ 'VSNAME').Value.ToLower()
                        <# DO NOT use Write-Message as this is inside of a script block #>
                        Write-Verbose "Found cluster $hostEntry"
                        $hostEntry = ([System.Net.Dns]::GetHostEntry($hostEntry)).HostName
                        $spn.ComputerName = $hostEntry
                    }

                    $rawVersion = [version]($services.AdvancedProperties | Where-Object Name -EQ 'VERSION').Value

                    $version = Convert-SqlVersion $rawVersion
                    $skuName = ($services.AdvancedProperties | Where-Object Name -EQ 'SKUNAME').Value

                    $spn.SqlProduct = "$version $skuName"

                    #is tcp enabled on this instance? If not, we don't need an spn, son
                    if ((($instance.ServerProtocols | Where-Object { $_.Displayname -eq "TCP/IP" }).ProtocolProperties | Where-Object { $_.Name -eq "Enabled" }).Value -eq $true) {
                        <# DO NOT use Write-Message as this is inside of a script block #>
                        Write-Verbose "TCP is enabled, gathering SPN requirements"
                        $spn.TcpEnabled = $true
                        #Each instance has a default SPN of MSSQLSvc\<fqdn> or MSSSQLSvc\<fqdn>:Instance
                        if ($instance.Name -eq "MSSQLSERVER") {
                            $spn.RequiredSPN = "MSSQLSvc/$hostEntry"
                        } else {
                            $spn.RequiredSPN = "MSSQLSvc/" + $hostEntry + ":" + $instance.Name
                        }
                    }

                    $spns += $spn
                }
                # Now, for each spn, do we need a port set? Only if TCP is enabled and NOT DYNAMIC!
                foreach ($spn in $spns) {
                    $ports = @()

                    $ips = (($wmi.ServerInstances | Where-Object { $_.Name -eq $spn.InstanceName }).ServerProtocols | Where-Object { $_.DisplayName -eq "TCP/IP" -and $_.IsEnabled -eq "True" }).IpAddresses
                    $ipAllPort = $null
                    foreach ($ip in $ips) {
                        if ($ip.Name -eq "IPAll") {
                            $ipAllPort = ($ip.IPAddressProperties | Where-Object { $_.Name -eq "TCPPort" }).Value
                            if (($ip.IpAddressProperties | Where-Object { $_.Name -eq "TcpDynamicPorts" }).Value -ne "") {
                                $ipAllPort = ($ip.IPAddressProperties | Where-Object { $_.Name -eq "TcpDynamicPorts" }).Value + "d"
                            }
                        } else {
                            $enabled = ($ip.IPAddressProperties | Where-Object { $_.Name -eq "Enabled" }).Value
                            $active = ($ip.IPAddressProperties | Where-Object { $_.Name -eq "Active" }).Value
                            $tcpDynamicPorts = ($ip.IPAddressProperties | Where-Object { $_.Name -eq "TcpDynamicPorts" }).Value
                            if ($enabled -and $active -and $tcpDynamicPorts -eq "") {
                                $ports += ($ip.IPAddressProperties | Where-Object { $_.Name -eq "TCPPort" }).Value
                            } elseif ($enabled -and $active -and $tcpDynamicPorts -ne "") {
                                $ports += $ipAllPort + "d"
                            }
                        }
                    }
                    if ($ipAllPort -ne "") {
                        #IPAll overrides any set ports. Not sure why that's the way it is?
                        $ports = $ipAllPort
                    }

                    $ports = $ports | Select-Object -Unique
                    foreach ($port in $ports) {
                        $newspn = $spn.PSObject.Copy()
                        if ($port -like "*d") {
                            $newspn.Port = ($port.replace("d", ""))
                            $newspn.RequiredSPN = $newspn.RequiredSPN.Replace($newSPN.InstanceName, $newspn.Port)
                            $newspn.DynamicPort = $true
                            $newspn.Warning = "Dynamic port is enabled"
                        } else {
                            #If this is a named instance, replace the instance name with a port number (for non-dynamic ported named instances)
                            $newspn.Port = $port
                            $newspn.DynamicPort = $false

                            if ($newspn.InstanceName -eq "MSSQLSERVER") {
                                $newspn.RequiredSPN = $newspn.RequiredSPN + ":" + $port
                            } else {
                                $newspn.RequiredSPN = $newspn.RequiredSPN.Replace($newSPN.InstanceName, $newspn.Port)
                            }
                        }
                        $spns += $newspn
                    }
                }
                $spns
            }


            try {
                $spns = Invoke-ManagedComputerCommand -ComputerName $hostEntry -ScriptBlock $Scriptblock -ArgumentList $resolved.FullComputerName, $hostEntry, $computer.InstanceName -Credential $Credential -ErrorAction Stop
            } catch {
                Stop-Function -Message "Couldn't connect to $computer" -ErrorRecord $_ -Continue
            }

            #Now query AD for each required SPN
            foreach ($spn in $spns) {
                $searchfor = 'User'
                if ($spn.InstanceServiceAccount -eq 'LocalSystem' -or $spn.InstanceServiceAccount -like 'NT SERVICE\*') {
                    Write-Message -Level Verbose -Message "Virtual account detected, changing target registration to computername"
                    $spn.InstanceServiceAccount = "$($resolved.Domain)\$($resolved.ComputerName)$"
                    $searchfor = 'Computer'
                } elseif ($spn.InstanceServiceAccount -like '*\*$') {
                    Write-Message -Level Verbose -Message "Managed Service Account detected"
                    $searchfor = 'Computer'
                }

                $serviceAccount = $spn.InstanceServiceAccount
                # spare the cmdlet to search for the same account over and over
                if ($spn.InstanceServiceAccount -notin $resultCache.Keys) {
                    Write-Message -Message "Searching for $serviceAccount" -Level Verbose
                    try {
                        $result = Get-DbaADObject -ADObject $serviceAccount -Type $searchfor -Credential $Credential -EnableException
                        $resultCache[$spn.InstanceServiceAccount] = $result
                    } catch {
                        if (![System.String]::IsNullOrEmpty($spn.InstanceServiceAccount)) {
                            Write-Message -Message "AD lookup failure. This may be because the domain cannot be resolved for the SQL Server service account ($serviceAccount)." -Level Warning
                        }
                    }
                } else {
                    $result = $resultCache[$spn.InstanceServiceAccount]
                }
                if ($result.Count -gt 0) {
                    try {
                        $results = $result.GetUnderlyingObject()
                        if ($results.Properties.servicePrincipalName -contains $spn.RequiredSPN) {
                            $spn.IsSet = $true
                        }
                    } catch {
                        Write-Message -Message "The SQL Service account ($serviceAccount) has been found, but you don't have enough permission to inspect its SPNs" -Level Warning
                        continue
                    }
                } else {
                    Write-Message -Level Warning -Message "SQL Service account not found. Results may not be accurate."
                    $spn
                    continue
                }
                if (!$spn.IsSet -and $spn.TcpEnabled) {
                    $spn.Error = "SPN missing"
                }

                $spn | Select-DefaultView -ExcludeProperty Credential, DomainName
            }
        }
    }
}

tools\dbatools\functions\Test-DbaTempDbConfig.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Test-DbaTempdbConfig {
    <#
    .SYNOPSIS
        Evaluates tempdb against several rules to match best practices.

    .DESCRIPTION
        Evaluates tempdb against a set of rules to match best practices. The rules are:

        * TF 1118 enabled - Is Trace Flag 1118 enabled (See KB328551).
        * File Count - Does the count of data files in tempdb match the number of logical cores, up to 8?
        * File Growth - Are any files set to have percentage growth? Best practice is all files have an explicit growth value.
        * File Location - Is tempdb located on the C:\? Best practice says to locate it elsewhere.
        * File MaxSize Set (optional) - Do any files have a max size value? Max size could cause tempdb problems if it isn't allowed to grow.
        * Data File Size Equal - Are the sizes of all the tempdb data files the same?

        Other rules can be added at a future date.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. SQL Server 2005 and higher are supported.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Detailed
        Output all properties, will be depreciated in 1.0.0 release.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: tempdb, configuration
        Author: Michael Fal (@Mike_Fal), http://mikefal.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        Based on Amit Bannerjee's (@banerjeeamit) Get-TempDB function (https://github.com/amitmsft/SqlOnAzureVM/blob/master/Get-TempdbFiles.ps1)

    .LINK
        https://dbatools.io/Test-DbaTempdbConfig

    .EXAMPLE
        PS C:\> Test-DbaTempdbConfig -SqlInstance localhost

        Checks tempdb on the localhost machine.

    .EXAMPLE
        PS C:\> Test-DbaTempdbConfig -SqlInstance localhost | Select-Object *

        Checks tempdb on the localhost machine. All rest results are shown.

    .EXAMPLE
        PS C:\> Get-DbaCmsRegServer -SqlInstance sqlserver2014a | Test-DbaTempdbConfig | Select-Object * | Out-GridView

        Checks tempdb configuration for a group of servers from SQL Server Central Management Server (CMS). Output includes all columns. Send output to GridView.
    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstance[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [switch]$Detailed,
        [switch]$EnableException
    )
    begin {
        Test-DbaDeprecation -DeprecatedOn 1.0.0 -Parameter Detailed
    }
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            # removed previous assumption that 2016+ will have it enabled
            $tfCheck = $server.Databases['tempdb'].Query("DBCC TRACEON (3604);DBCC TRACESTATUS(-1)")
            $current = ($tfCheck.TraceFlag -join ',').Contains('1118')

            [PSCustomObject]@{
                ComputerName   = $server.ComputerName
                InstanceName   = $server.ServiceName
                SqlInstance    = $server.DomainInstanceName
                Rule           = 'TF 1118 Enabled'
                Recommended    = $true
                CurrentSetting = $current
                IsBestPractice = $current -eq $true
                Notes          = 'KB328551 describes how TF 1118 can benefit performance. SQL Server 2016 has this functionality enabled by default.'
            }

            Write-Message -Level Verbose -Message "TF 1118 evaluated"

            #get files and log files
            $tempdbFiles = Get-DbaDbFile -SqlInstance $server -Database tempdb
            [array]$dataFiles = $tempdbFiles | Where-Object Type -ne 1
            $logFiles = $tempdbFiles | Where-Object Type -eq 1
            Write-Message -Level Verbose -Message "TempDB file objects gathered"

            [PSCustomObject]@{
                ComputerName   = $server.ComputerName
                InstanceName   = $server.ServiceName
                SqlInstance    = $server.DomainInstanceName
                Rule           = 'File Count'
                Recommended    = [Math]::Min(8, $server.Processors)
                CurrentSetting = $dataFiles.Count
                IsBestPractice = $dataFiles.Count -eq [Math]::Min(8, $server.Processors)
                Notes          = 'Microsoft recommends that the number of tempdb data files is equal to the number of logical cores up to 8.'
            }

            Write-Message -Level Verbose -Message "File counts evaluated."

            #test file growth
            $percData = $dataFiles | Where-Object GrowthType -ne 'KB' | Measure-Object
            $percLog = $logFiles | Where-Object GrowthType -ne 'KB' | Measure-Object

            $totalCount = $percData.Count + $percLog.Count
            if ($totalCount -gt 0) {
                $totalCount = $true
            } else {
                $totalCount = $false
            }

            [PSCustomObject]@{
                ComputerName   = $server.ComputerName
                InstanceName   = $server.ServiceName
                SqlInstance    = $server.DomainInstanceName
                Rule           = 'File Growth in Percent'
                Recommended    = $false
                CurrentSetting = $totalCount
                IsBestPractice = $totalCount -eq $false
                Notes          = 'Set file growth to explicit values, not by percent.'
            }

            Write-Message -Level Verbose -Message "File growth settings evaluated."
            #test file Location

            $cdata = ($dataFiles | Where-Object PhysicalName -like 'C:*' | Measure-Object).Count + ($logFiles | Where-Object PhysicalName -like 'C:*' | Measure-Object).Count
            if ($cdata -gt 0) {
                $cdata = $true
            } else {
                $cdata = $false
            }

            [PSCustomObject]@{
                ComputerName   = $server.ComputerName
                InstanceName   = $server.ServiceName
                SqlInstance    = $server.DomainInstanceName
                Rule           = 'File Location'
                Recommended    = $false
                CurrentSetting = $cdata
                IsBestPractice = $cdata -eq $false
                Notes          = "Do not place your tempdb files on C:\."
            }

            Write-Message -Level Verbose -Message "File locations evaluated."

            #Test growth limits
            $growthLimits = ($dataFiles | Where-Object MaxSize -gt 0 | Measure-Object).Count + ($logFiles | Where-Object MaxSize -gt 0 | Measure-Object).Count
            if ($growthLimits -gt 0) {
                $growthLimits = $true
            } else {
                $growthLimits = $false
            }

            [PSCustomObject]@{
                ComputerName   = $server.ComputerName
                InstanceName   = $server.ServiceName
                SqlInstance    = $server.DomainInstanceName
                Rule           = 'File MaxSize Set'
                Recommended    = $false
                CurrentSetting = $growthLimits
                IsBestPractice = $growthLimits -eq $false
                Notes          = "Consider setting your tempdb files to unlimited growth."
            }

            Write-Message -Level Verbose -Message "MaxSize values evaluated."

            #Test Data File Size Equal
            $distinctCountSizeDataFiles = ($dataFiles | Group-Object -Property Size | Measure-Object).Count

            if ($distinctCountSizeDataFiles -eq 1) {
                $equalSizeDataFiles = $true
            } else {
                $equalSizeDataFiles = $false
            }

            $value = [PSCustomObject]@{
                ComputerName   = $server.ComputerName
                InstanceName   = $server.ServiceName
                SqlInstance    = $server.DomainInstanceName
                Rule           = 'Data File Size Equal'
                Recommended    = $true
                CurrentSetting = $equalSizeDataFiles
                IsBestPractice = $equalSizeDataFiles -eq $true
                Notes          = "Consider creating equally sized data files."
            }
            Write-Message -Level Verbose -Message "Data File Size Equal evaluated."
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Test-SqlTempDbConfiguration
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Test-DbaTempDbConfiguration
    }
}

tools\dbatools\functions\Test-DbaWindowsLogin.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Test-DbaWindowsLogin {
    <#
    .SYNOPSIS
        Test-DbaWindowsLogin finds any logins on SQL instance that are AD logins with either disabled AD user accounts or ones that no longer exist

    .DESCRIPTION
        The purpose of this function is to find SQL Server logins that are used by active directory users that are either disabled or removed from the domain. It allows you to keep your logins accurate and up to date by removing accounts that are no longer needed.

    .PARAMETER SqlInstance
        The SQL Server instance you're checking logins on. You must have sysadmin access and server version must be SQL Server version 2000 or higher.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Login
        Specifies a list of logins to include in the results. Options for this list are auto-populated from the server.

    .PARAMETER ExcludeLogin
        Specifies a list of logins to exclude from the results. Options for this list are auto-populated from the server.

    .PARAMETER FilterBy
        Specifies the object types to return. By default, both Logins and Groups are returned. Valid options for this parameter are 'GroupsOnly' and 'LoginsOnly'.

    .PARAMETER IgnoreDomains
        Specifies a list of Active Directory domains to ignore. By default, all domains in the forest as well as all trusted domains are traversed.

    .PARAMETER Detailed
        Output all properties, will be depreciated in 1.0.0 release.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Login, Security
        Author: Stephen Bennett, https://sqlnotesfromtheunderground.wordpress.com/ | Chrissy LeMaire (@cl)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Test-DbaWindowsLogin

    .EXAMPLE
        PS C:\> Test-DbaWindowsLogin -SqlInstance Dev01

        Tests all logins in the current Active Directory domain that are either disabled or do not exist on the SQL Server instance Dev01

    .EXAMPLE
        PS C:\> Test-DbaWindowsLogin -SqlInstance Dev01 -FilterBy GroupsOnly | Select-Object -Property *

        Tests all Active Directory groups that have logins on Dev01, and shows all information for those logins

    .EXAMPLE
        PS C:\> Test-DbaWindowsLogin -SqlInstance Dev01 -IgnoreDomains testdomain

        Tests all Domain logins excluding any that are from the testdomain

    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "SqlServers")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [object[]]$Login,
        [object[]]$ExcludeLogin,
        [ValidateSet("LoginsOnly", "GroupsOnly", "None")]
        [string]$FilterBy = "None",
        [string[]]$IgnoreDomains,
        [switch]$Detailed,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        Test-DbaDeprecation -DeprecatedOn 1.0.0 -Parameter Detailed

        if ($IgnoreDomains) {
            $IgnoreDomainsNormalized = $IgnoreDomains.ToUpper()
            Write-Message -Message ("Excluding logins for domains " + ($IgnoreDomains -join ',')) -Level Verbose
        }

        $mappingRaw = @{
            'SCRIPT'                                 = 1
            'ACCOUNTDISABLE'                         = 2
            'HOMEDIR_REQUIRED'                       = 8
            'LOCKOUT'                                = 16
            'PASSWD_NOTREQD'                         = 32
            'PASSWD_CANT_CHANGE'                     = 64
            'ENCRYPTED_TEXT_PASSWORD_ALLOWED'        = 128
            'TEMP_DUPLICATE_ACCOUNT'                 = 256
            'NORMAL_ACCOUNT'                         = 512
            'INTERDOMAIN_TRUST_ACCOUNT'              = 2048
            'WORKSTATION_TRUST_ACCOUNT'              = 4096
            'SERVER_TRUST_ACCOUNT'                   = 8192
            'DONT_EXPIRE_PASSWD'                     = 65536
            'MNS_LOGON_ACCOUNT'                      = 131072
            'SMARTCARD_REQUIRED'                     = 262144
            'TRUSTED_FOR_DELEGATION'                 = 524288
            'NOT_DELEGATED'                          = 1048576
            'USE_DES_KEY_ONLY'                       = 2097152
            'DONT_REQUIRE_PREAUTH'                   = 4194304
            'PASSWORD_EXPIRED'                       = 8388608
            'TRUSTED_TO_AUTHENTICATE_FOR_DELEGATION' = 16777216
            'NO_AUTH_DATA_REQUIRED'                  = 33554432
            'PARTIAL_SECRETS_ACCOUNT'                = 67108864
        }
    }
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
                Write-Message -Message "Connected to: $instance." -Level Verbose
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }


            # we can only validate AD logins
            $allWindowsLoginsGroups = $server.Logins | Where-Object { $_.LoginType -in ('WindowsUser', 'WindowsGroup') }

            # we cannot validate local users
            $allWindowsLoginsGroups = $allWindowsLoginsGroups | Where-Object { $_.Name.StartsWith("NT ") -eq $false -and $_.Name.StartsWith($server.ComputerName) -eq $false -and $_.Name.StartsWith("BUILTIN") -eq $false }
            if ($Login) {
                $allWindowsLoginsGroups = $allWindowsLoginsGroups | Where-Object Name -In $Login
            }
            if ($ExcludeLogin) {
                $allWindowsLoginsGroups = $allWindowsLoginsGroups | Where-Object Name -NotIn $ExcludeLogin
            }
            switch ($FilterBy) {
                "LoginsOnly" {
                    Write-Message -Message "Search restricted to logins." -Level Verbose
                    $windowsLogins = $allWindowsLoginsGroups | Where-Object LoginType -eq 'WindowsUser'
                }
                "GroupsOnly" {
                    Write-Message -Message "Search restricted to groups." -Level Verbose
                    $windowsGroups = $allWindowsLoginsGroups | Where-Object LoginType -eq 'WindowsGroup'
                }
                "None" {
                    Write-Message -Message "Search both logins and groups." -Level Verbose
                    $windowsLogins = $allWindowsLoginsGroups | Where-Object LoginType -eq 'WindowsUser'
                    $windowsGroups = $allWindowsLoginsGroups | Where-Object LoginType -eq 'WindowsGroup'
                }
            }
            foreach ($login in $windowsLogins) {
                $adLogin = $login.Name
                $loginSid = $login.Sid -join ''
                $domain, $username = $adLogin.Split("\")
                if ($domain.ToUpper() -in $IgnoreDomainsNormalized) {
                    Write-Message -Message "Skipping Login $adLogin." -Level Verbose
                    continue
                }
                Write-Message -Message "Parsing Login $adLogin." -Level Verbose
                $exists = $false
                try {
                    $u = Get-DbaADObject -ADObject $adLogin -Type User -EnableException
                    if ($null -eq $u -and $adLogin -like '*$') {
                        Write-Message -Message "Parsing Login as computer" -Level Verbose
                        $u = Get-DbaADObject -ADObject $adLogin -Type Computer -EnableException
                        $adType = 'Computer'
                    } else {
                        $adType = 'User'
                    }
                    $foundUser = $u.GetUnderlyingObject()
                    $foundSid = $foundUser.ObjectSid.Value -join ''
                    if ($foundUser) {
                        $exists = $true
                    }
                    if ($foundSid -ne $loginSid) {
                        Write-Message -Message "SID mismatch detected for $adLogin." -Level Warning
                        Write-Message -Message "SID mismatch detected for $adLogin (MSSQL: $loginSid, AD: $foundSid)." -Level Debug
                        $exists = $false
                    }
                } catch {
                    Write-Message -Message "AD Searcher Error for $username." -Level Warning
                }

                $uac = $foundUser.Properties.UserAccountControl

                $additionalProps = @{
                    AccountNotDelegated               = $null
                    AllowReversiblePasswordEncryption = $null
                    CannotChangePassword              = $null
                    PasswordExpired                   = $null
                    LockedOut                         = $null
                    Enabled                           = $null
                    PasswordNeverExpires              = $null
                    PasswordNotRequired               = $null
                    SmartcardLogonRequired            = $null
                    TrustedForDelegation              = $null
                }
                if ($uac) {
                    $additionalProps = @{
                        AccountNotDelegated               = [bool]($uac.Value -band $mappingRaw['NOT_DELEGATED'])
                        AllowReversiblePasswordEncryption = [bool]($uac.Value -band $mappingRaw['ENCRYPTED_TEXT_PASSWORD_ALLOWED'])
                        CannotChangePassword              = [bool]($uac.Value -band $mappingRaw['PASSWD_CANT_CHANGE'])
                        PasswordExpired                   = [bool]($uac.Value -band $mappingRaw['PASSWORD_EXPIRED'])
                        LockedOut                         = [bool]($uac.Value -band $mappingRaw['LOCKOUT'])
                        Enabled                           = !($uac.Value -band $mappingRaw['ACCOUNTDISABLE'])
                        PasswordNeverExpires              = [bool]($uac.Value -band $mappingRaw['DONT_EXPIRE_PASSWD'])
                        PasswordNotRequired               = [bool]($uac.Value -band $mappingRaw['PASSWD_NOTREQD'])
                        SmartcardLogonRequired            = [bool]($uac.Value -band $mappingRaw['SMARTCARD_REQUIRED'])
                        TrustedForDelegation              = [bool]($uac.Value -band $mappingRaw['TRUSTED_FOR_DELEGATION'])
                        UserAccountControl                = $uac.Value
                    }
                }
                $rtn = [PSCustomObject]@{
                    Server                            = $server.DomainInstanceName
                    Domain                            = $domain
                    Login                             = $username
                    Type                              = $adType
                    Found                             = $exists
                    DisabledInSQLServer               = $login.IsDisabled
                    AccountNotDelegated               = $additionalProps.AccountNotDelegated
                    AllowReversiblePasswordEncryption = $additionalProps.AllowReversiblePasswordEncryption
                    CannotChangePassword              = $additionalProps.CannotChangePassword
                    PasswordExpired                   = $additionalProps.PasswordExpired
                    LockedOut                         = $additionalProps.LockedOut
                    Enabled                           = $additionalProps.Enabled
                    PasswordNeverExpires              = $additionalProps.PasswordNeverExpires
                    PasswordNotRequired               = $additionalProps.PasswordNotRequired
                    SmartcardLogonRequired            = $additionalProps.SmartcardLogonRequired
                    TrustedForDelegation              = $additionalProps.TrustedForDelegation
                    UserAccountControl                = $additionalProps.UserAccountControl
                }

                Select-DefaultView -InputObject $rtn -ExcludeProperty AccountNotDelegated, AllowReversiblePasswordEncryption, CannotChangePassword, PasswordNeverExpires, SmartcardLogonRequired, TrustedForDelegation, UserAccountControl

            }

            foreach ($login in $windowsGroups) {
                $adLogin = $login.Name
                $loginSid = $login.Sid -join ''
                $domain, $groupName = $adLogin.Split("\")
                if ($domain.ToUpper() -in $IgnoreDomainsNormalized) {
                    Write-Message -Message "Skipping Login $adLogin." -Level Verbose
                    continue
                }
                Write-Message -Message "Parsing Login $adLogin on $server." -Level Verbose
                $exists = $false
                try {
                    $u = Get-DbaADObject -ADObject $adLogin -Type Group -EnableException
                    $foundUser = $u.GetUnderlyingObject()
                    $foundSid = $foundUser.objectSid.Value -join ''
                    if ($foundUser) {
                        $exists = $true
                    }
                    if ($foundSid -ne $loginSid) {
                        Write-Message -Message "SID mismatch detected for $adLogin." -Level Warning
                        Write-Message -Message "SID mismatch detected for $adLogin (MSSQL: $loginSid, AD: $foundSid)." -Level Debug
                        $exists = $false
                    }
                } catch {
                    Write-Message -Message "AD Searcher Error for $groupName on $server" -Level Warning
                }
                $rtn = [PSCustomObject]@{
                    Server                            = $server.DomainInstanceName
                    Domain                            = $domain
                    Login                             = $groupName
                    Type                              = "Group"
                    Found                             = $exists
                    DisabledInSQLServer               = $login.IsDisabled
                    AccountNotDelegated               = $null
                    AllowReversiblePasswordEncryption = $null
                    CannotChangePassword              = $null
                    PasswordExpired                   = $null
                    LockedOut                         = $null
                    Enabled                           = $null
                    PasswordNeverExpires              = $null
                    PasswordNotRequired               = $null
                    SmartcardLogonRequired            = $null
                    TrustedForDelegation              = $null
                    UserAccountControl                = $null
                }

                Select-DefaultView -InputObject $rtn -ExcludeProperty AccountNotDelegated, AllowReversiblePasswordEncryption, CannotChangePassword, PasswordNeverExpires, SmartcardLogonRequired, TrustedForDelegation, UserAccountControl

            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Test-DbaValidLogin
    }
}

tools\dbatools\functions\Uninstall-DbaSqlWatch.ps1

#ValidationTags#CodeStyle,Messaging,FlowControl,Pipeline#
Function Uninstall-DbaSqlWatch {
    <#
    .SYNOPSIS
        Uninstalls SqlWatch.

    .DESCRIPTION
        Deletes all user objects, agent jobs, and historical data associated with SqlWatch.

    .PARAMETER SqlInstance
        SQL Server name or SMO object representing the SQL Server to connect to.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        Specifies the database to install SqlWatch into. Defaults to master.

    .PARAMETER Confirm
        Prompts to confirm actions

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: SqlWatch
        Author: Ken K (github.com/koglerk)
        Website: https://sqlwatch.io
        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Uninstall-DbaSqlWatch

    .EXAMPLE
        Uninstall-DbaSqlWatch -SqlInstance server1

        Deletes all user objects, agent jobs, and historical data associated with SqlWatch from the master database.
       #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "Low")]
    param (
        [Parameter(Mandatory, ValueFromPipeline)]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string]$Database = "master",
        [switch]$EnableException
    )

    begin {

        # validate database parameter

        if (Test-Bound -Not -ParameterName 'DacfxPath') {
            $dacfxPath = "$script:PSModuleRoot\bin\smo\Microsoft.SqlServer.Dac.dll"
        }

        if ((Test-Path $dacfxPath) -eq $false) {
            Stop-Function -Message 'No usable version of Dac Fx found.'
        } else {
            try {
                Add-Type -Path $dacfxPath
                Write-Message -Level Verbose -Message "Dac Fx loaded."
            } catch {
                Stop-Function -Message 'No usable version of Dac Fx found.' -ErrorRecord $_
            }
        }
    }
    process {
        if (Test-FunctionInterrupt) {
            return
        }

        foreach ($instance in $SqlInstance) {

            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            # get SqlWatch objects
            $tables = Get-DbaDbTable -SqlInstance $server -Database $Database | Where-Object {$PSItem.Name -like "sql_perf_mon_*" -or $PSItem.Name -like "logger_*" }
            $views = Get-DbaDbView -SqlInstance $server -Database $Database | Where-Object {$PSItem.Name -like "vw_sql_perf_mon_*" }
            $sprocs = Get-DbaDbStoredProcedure -SqlInstance $server -Database $Database | Where-Object {$PSItem.Name -like "sp_sql_perf_mon_*" -or $PSItem.Name -like "usp_logger_*" }
            $agentJobs = Get-DbaAgentJob -SqlInstance $server | Where-Object { ($PSItem.Name -like "SqlWatch-*") -or ($PSItem.Name -like "DBA-PERF-*") }

            if ($PSCmdlet.ShouldProcess($server, "Removing SqlWatch SQL Agent jobs")) {
                try {
                    Write-Message -Level Verbose -Message "Removing SQL Agent jobs from $server."
                    $agentJobs | Remove-DbaAgentJob | Out-Null
                } catch {
                    Stop-Function -Message "Could not remove all SqlWatch Agent Jobs on $server." -ErrorRecord $_ -Target $server -Continue
                }
            }

            if ($PSCmdlet.ShouldProcess($server, "Removing SqlWatch stored procedures")) {
                try {
                    Write-Message -Level Verbose -Message "Removing SqlWatch stored procedures from $database on $server."
                    $dropScript = ""
                    $sprocs | ForEach-Object {
                        $dropScript += "DROP PROCEDURE $($PSItem.Name);`n"
                    }
                    if ($dropScript) {
                        Invoke-DbaQuery -SqlInstance $server -Database $Database -Query $dropScript
                    }
                } catch {
                    Stop-Function -Message "Could not remove all SqlWatch stored procedures from $database on $server." -ErrorRecord $_ -Target $server -Continue
                }
            }

            if ($PSCmdlet.ShouldProcess($server, "Removing SqlWatch views")) {
                try {
                    Write-Message -Level Verbose -Message "Removing SqlWatch views from $database on $server."
                    $dropScript = ""
                    $views | ForEach-Object {
                        $dropScript += "DROP VIEW $($PSItem.Name);`n"
                    }
                    if ($dropScript) {
                        Invoke-DbaQuery -SqlInstance $server -Database $Database -Query $dropScript
                    }
                } catch {
                    Stop-Function -Message "Could not remove all SqlWatch views from $database on $server." -ErrorRecord $_ -Target $server -Continue
                }
            }

            if ($PSCmdlet.ShouldProcess($server, "Removing SqlWatch tables")) {
                try {
                    Write-Message -Level Verbose -Message "Removing foreign keys from SqlWatch tables in $database on $server."
                    if ($tables.ForeignKeys) {
                        $tables.ForeignKeys | ForEach-Object { $PSItem.Drop() }
                    }
                } catch {
                    Stop-Function -Message "Could not remove all foreign keys from SqlWatch tables in $database on $server." -ErrorRecord $_ -Target $server -Continue
                }

                try {
                    Write-Message -Level Verbose -Message "Removing SqlWatch tables from $database on $server."
                    $dropScript = ""
                    $tables | ForEach-Object {
                        $dropScript += "DROP TABLE $($PSItem.Name);`n"
                    }
                    if ($dropScript) {
                        Invoke-DbaQuery -SqlInstance $server -Database $Database -Query $dropScript
                    }
                } catch {
                    Stop-Function -Message "Could not remove all SqlWatch tables from $database on $server." -ErrorRecord $_ -Target $server -Continue
                }
            }

            if ($PSCmdlet.ShouldProcess($server, "Unpublishing DACPAC")) {
                try {
                    Write-Message -Level Verbose -Message "Unpublishing SqlWatch DACPAC from $database on $server."
                    $connectionString = $server | Select-Object -ExpandProperty ConnectionContext
                    $dacServices = New-Object Microsoft.SqlServer.Dac.DacServices $connectionString
                    $dacServices.Unregister($Database)
                } catch {
                    Stop-Function -Message "Failed to unpublish SqlWatch DACPAC from $database on $server." -ErrorRecord $_
                }
            }
        }
    }
}

tools\dbatools\functions\Uninstall-DbaWatchUpdate.ps1

function Uninstall-DbaWatchUpdate {
    <#
    .SYNOPSIS
        Removes the scheduled task created for Watch-DbaUpdate by Install-DbaWatchUpdate so that notifications no longer pop up.

    .DESCRIPTION
        Removes the scheduled task created for Watch-DbaUpdate by Install-DbaWatchUpdate so that notifications no longer pop up.

    .NOTES
        Tags: JustForFun, Module
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Uninstall-DbaWatchUpdate

    .EXAMPLE
        PS C:\> Uninstall-DbaWatchUpdate

        Removes the scheduled task created by Install-DbaWatchUpdate.

    #>
    process {
        if (([Environment]::OSVersion).Version.Major -lt 10) {
            Write-Message -Level Warning -Message "This command only supports Windows 10 and higher."
            return
        }

        <# Does not utilize message system because of script block #>
        $script = {
            try {
                $task = Get-ScheduledTask -TaskName "dbatools version check" -ErrorAction SilentlyContinue

                if ($null -eq $task) {
                    Write-Message -Level Warning -Message "Task doesn't exist. Skipping removal."
                } else {
                    Write-Message -Level Output -Message "Removing watchupdate.xml."
                    $file = "$env:LOCALAPPDATA\dbatools\watchupdate.xml"
                    Remove-Item $file -ErrorAction SilentlyContinue

                    Write-Message -Level Output -Message "Removing Scheduled Task 'dbatools version check'."
                    $task | Unregister-ScheduledTask -Confirm:$false -ErrorAction Stop

                    Write-Message -Level Output -Message "Task removed"

                    Start-Sleep -Seconds 2
                }
            } catch {
                Write-Message -Level Warning -Message "Task could not be deleted. Please remove 'dbatools version check' manually."
            }
        }
        # Needs admin credentials to remove the task because of the way it was setup

        $task = Get-ScheduledTask -TaskName "dbatools version check" -ErrorAction SilentlyContinue

        if ($null -eq $task) {
            Write-Message -Level Warning -Message "dbatools update watcher is not installed."
            return
        }

        if (-not ([Security.Principal.WindowsPrincipal][Security.Principal.WindowsIdentity]::GetCurrent()).IsInRole([Security.Principal.WindowsBuiltInRole] "Administrator")) {
            Write-Message -Level Warning -Message "Removal of this scheduled task requires elevated permissions."
            Start-Process powershell -Verb runAs -ArgumentList Uninstall-DbaWatchUpdate -Wait
        } else {
            Invoke-Command -ScriptBlock $script
        }

        Write-Message -Level Output -Message "All done!"
    }
}

tools\dbatools\functions\Update-DbaInstance.ps1

function Update-DbaInstance {
    <#
    .SYNOPSIS
        Invokes installation of SQL Server Service Packs and Cumulative Updates on local and remote servers.

    .DESCRIPTION
        Starts and automated process of updating SQL Server installation to a specific version defined in the parameters.
        The command will:

        * Search for SQL Server installations in a remote registry
        * Check if current settings are applicable to the current SQL Server versions
        * Search for a KB executable in a folder specified in -Path
        * Establish a PSRemote connection to the target machine if necessary
        * Extract KB to a temporary folder in a current user's profile
        * Run the installation from the temporary folder updating all instances on the computer at once
        * Remove temporary files
        * Restart the computer (if -Restart is specified)
        * Repeat for each consequent KB and computer

        The impact of this function is set to High, if you don't want to receive interactive prompts, set -Confirm to $false.
        Credentials are a required parameter for remote machines. Without specifying -Credential, the installation will fail due to lack of permissions.

        CredSSP is a recommended transport for running the updates remotely. Update-DbaInstance will attempt to reconfigure
        local and remote hosts to support CredSSP, which is why it is desirable to run this command in an elevated console at all times.
        CVE-2018-0886 security update is required for both local and remote hosts. If CredSSP connections are failing, make sure to
        apply recent security updates prior to doing anything else.

        Always backup databases and configurations prior to upgrade.

    .PARAMETER ComputerName
        Target computer with SQL instance or instsances.

    .PARAMETER Credential
        Windows Credential with permission to log on to the remote server. Must be specified for any remote connection.

    .PARAMETER Type
        Type of the update: All | ServicePack | CumulativeUpdate.
        Default: All
        Use -Version to limit upgrade to a certain Major version of SQL Server.

    .PARAMETER KB
        Install a specific update or list of updates. Can be a number of a string KBXXXXXXX.

    .PARAMETER Version
        A target version of the installation you want to reach. If not specified, a latest available version would be used by default.
        Can be defined using the following general pattern: <MajorVersion><SPX><CUX>.
        Any part of the pattern can be ommitted if needed:
        2008R2SP1 - will update SQL 2008R2 to SP1
        2016CU3 - will update SQL 2016 to CU3 of current Service Pack installed
        SP0CU3 - will update all existing SQL Server versions to RTM CU3 without installing any service packs
        SP1CU7 - will update all existing SQL Server versions to SP1 and then (after restart if -Restart is specified) to SP1CU7
        CU7 - will update all existing SQL Server versions to CU7 of current Service Pack installed

    .PARAMETER Path
        Path to the folder(s) with SQL Server patches downloaded. It will be scanned recursively for available patches.
        Path should be available from both server with SQL Server installation and client that runs the command.
        All file names should match the pattern used by Microsoft: SQLServer####*-KB###-*x##*.exe
        If a file is missing in the repository, the installation will fail.
        Consider setting the following configuration if you want to omit this parameter: `Set-DbatoolsConfig -Name Path.SQLServerUpdates -Value '\\path\to\updates'`

    .PARAMETER Restart
        Restart computer automatically after a successful installation of a patch and wait until it comes back online.
        Using this parameter is the only way to chain-install more than 1 patch on a computer, since every single patch will require a restart of said computer.

    .PARAMETER Continue
        Continues a failed installation attempt when specified. Will abort a previously failed installation otherwise.

    .PARAMETER InstanceName
        Only updates a specific instance(s).

    .PARAMETER Throttle
        Maximum number of computers updated in parallel. Once reached, the update operations will queue up.
        Default: 50

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.


    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Install, Patching, SP, CU, Instance
        Author: Kirill Kravtsov (@nvarscar) https://nvarscar.wordpress.com/

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        Requires Local Admin rights on destination computer(s).

    .EXAMPLE
        PS C:\> Update-DbaInstance -ComputerName SQL1 -Version SP3 -Path \\network\share

        Updates all applicable SQL Server installations on SQL1 to SP3.
        Binary files for the update will be searched among all files and folders recursively in \\network\share.
        Prompts for confirmation before the update.

    .EXAMPLE
        PS C:\> Update-DbaInstance -ComputerName SQL1, SQL2 -Restart -Path \\network\share -Confirm:$false

        Updates all applicable SQL Server installations on SQL1 and SQL2 with the most recent patch.
        It will install latest ServicePack, restart the computers, install latest Cumulative Update, and finally restart the computer once again.
        Binary files for the update will be searched among all files and folders recursively in \\network\share.
        Does not prompt for confirmation.

    .EXAMPLE
        PS C:\> Update-DbaInstance -ComputerName SQL1 -Version 2012 -Type ServicePack -Path \\network\share

        Updates SQL Server 2012 on SQL1 with the most recent ServicePack found in your patch repository.
        Binary files for the update will be searched among all files and folders recursively in \\network\share.
        Prompts for confirmation before the update.

    .EXAMPLE
        PS C:\> Update-DbaInstance -ComputerName SQL1 -KB 123456 -Restart -Path \\network\share -Confirm:$false

        Installs KB 123456 on SQL1 and restarts the computer.
        Binary files for the update will be searched among all files and folders recursively in \\network\share.
        Does not prompt for confirmation.

    .EXAMPLE
        PS C:\> Update-DbaInstance -ComputerName Server1 -Version SQL2012SP3, SQL2016SP2CU3 -Path \\network\share -Restart -Confirm:$false

        Updates SQL 2012 to SP3 and SQL 2016 to SP2CU3 on Server1. Each update will be followed by a restart.
        Binary files for the update will be searched among all files and folders recursively in \\network\share.
        Does not prompt for confirmation.

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'High', DefaultParameterSetName = 'Version')]
    Param (
        [parameter(ValueFromPipeline, Position = 1)]
        [Alias("cn", "host", "Server")]
        [DbaInstanceParameter[]]$ComputerName = $env:COMPUTERNAME,
        [pscredential]$Credential,
        [Parameter(ParameterSetName = 'Version')]
        [ValidateNotNullOrEmpty()]
        [string[]]$Version,
        [Parameter(ParameterSetName = 'Version')]
        [ValidateSet('All', 'ServicePack', 'CumulativeUpdate')]
        [string[]]$Type = @('All'),
        [Parameter(Mandatory, ParameterSetName = 'KB')]
        [ValidateNotNullOrEmpty()]
        [string[]]$KB,
        [Alias("Instance")]
        [string]$InstanceName,
        [string[]]$Path,
        [switch]$Restart,
        [switch]$Continue,
        [ValidateNotNull()]
        [int]$Throttle = 50,
        [switch]$EnableException
    )
    begin {
        #Validating parameters
        if ($PSCmdlet.ParameterSetName -eq 'Version') {
            foreach ($v in $Version) {
                if ($v -notmatch '^((SQL)?\d{4}(R2)?)?\s*(RTM|SP\d+)?\s*(CU\d+)?$') {
                    Stop-Function -Category InvalidArgument -Message "$Version is an incorrect Version value, please refer to Get-Help Update-DbaInstance -Parameter Version"
                    return
                }
            }
        } elseif ($PSCmdlet.ParameterSetName -eq 'KB') {
            $kbList = @()
            foreach ($kbItem in $KB) {
                if ($kbItem -match '^(KB)?(\d+)$') {
                    $kbList += $Matches[2]
                } else {
                    Stop-Function -Category InvalidArgument -Message "$kbItem is an incorrect KB value, please refer to Get-Help Update-DbaInstance -Parameter KB"
                    return
                }
            }
        }
        $actions = @()
        $actionTemplate = @{}
        if ($InstanceName) { $actionTemplate.InstanceName = $InstanceName }
        if ($Continue) { $actionTemplate.Continue = $Continue }
        #Putting together list of actions based on current ParameterSet
        if ($PSCmdlet.ParameterSetName -eq 'Version') {
            if ($Type -contains 'All') { $typeList = @('ServicePack', 'CumulativeUpdate') }
            else { $typeList = $Type | Sort-Object -Descending }
            foreach ($ver in $Version) {
                $currentAction = $actionTemplate.Clone()
                if ($ver -and $ver -match '^(SQL)?(\d{4}(R2)?)?\s*(RTM|SP)?(\d+)?(CU)?(\d+)?') {
                    $majorV, $spV, $cuV = $Matches[2, 5, 7]
                    Write-Message -Level Debug -Message "Parsed Version as Major $majorV SP $spV CU $cuV"
                    # Add appropriate fields to the splat
                    # Add version to every field
                    if ($null -ne $majorV) {
                        $currentAction += @{
                            MajorVersion = $majorV
                        }
                        # When version is the only thing that is specified, we want all the types added
                        if ($null -eq $spV -and $null -eq $cuV) {
                            foreach ($currentType in $typeList) {
                                $actions += $currentAction.Clone() + @{ Type = $currentType }
                            }
                        }
                    }
                    #when SP# is specified
                    if ($null -ne $spV) {
                        $currentAction += @{
                            ServicePack = $spV
                        }
                        # ignore SP0 and trigger only when SP is in Type
                        if ($spV -ne '0' -and 'ServicePack' -in $typeList) {
                            $actions += $currentAction.Clone()
                        }
                    }
                    # When CU# is specified, but ignore CU0 and trigger only when CU is in Type
                    if ($null -ne $cuV -and $cuV -ne '0' -and 'CumulativeUpdate' -in $typeList) {
                        $actions += $currentAction.Clone() + @{ CumulativeUpdate = $cuV }
                    }
                } else {
                    Stop-Function -Category InvalidArgument -Message "$ver is an incorrect Version value, please refer to Get-Help Update-DbaInstance -Parameter Version"
                    return
                }
            }
            # If no version specified, simply apply latest $currentType
            if (!$Version) {
                foreach ($currentType in $typeList) {
                    $currentAction = $actionTemplate.Clone() + @{
                        Type = $currentType
                    }
                    $actions += $currentAction
                }
            }
        } elseif ($PSCmdlet.ParameterSetName -eq 'KB') {
            foreach ($kbItem in $kbList) {
                $currentAction = $actionTemplate.Clone() + @{
                    KB = $kbItem
                }
                $actions += $currentAction
            }
        }
        # debug message
        foreach ($a in $actions) {
            Write-Message -Level Debug -Message "Added installation action $($a | ConvertTo-Json -Depth 1 -Compress)"
        }
        # defining how to process the final results
        $outputHandler = {
            $_ | Select-DefaultView -Property ComputerName, MajorVersion, TargetLevel, KB, Successful, Restarted, InstanceName, Installer, Notes
            if ($_.Successful -eq $false) {
                Write-Message -Level Warning -Message "Update failed: $($_.Notes -join ' | ')"
            }
        }
    }
    process {
        if (Test-FunctionInterrupt) { return }

        #Resolve all the provided names
        $resolvedComputers = @()
        foreach ($computer in $ComputerName) {
            $null = Test-ElevationRequirement -ComputerName $computer -Continue
            if (!$computer.IsLocalHost) {
                if (!$Credential) {
                    Write-Message -Level Warning -Message "Explicit credentials are required when running agains remote hosts. Make sure to define the -Credential parameter"
                }
            }
            if ($resolvedComputer = Resolve-DbaNetworkName -ComputerName $computer.ComputerName) {
                $resolvedComputers += $resolvedComputer.FullComputerName
            }
        }
        #Leave only unique computer names
        $resolvedComputers = $resolvedComputers | Sort-Object -Unique
        #Process planned actions and gather installation actions
        $installActions = @()
        :computers foreach ($resolvedName in $resolvedComputers) {
            $activity = "Preparing to update SQL Server on $resolvedName"
            ## Find the current version on the computer
            Write-ProgressHelper -ExcludePercent -Activity $activity -StepNumber 0 -Message "Gathering all SQL Server instance versions"
            $components = Get-SQLInstanceComponent -ComputerName $resolvedName -Credential $Credential
            if (!$components) {
                Stop-Function -Message "No SQL Server installations found on $resolvedName" -Continue
            }
            Write-Message -Level Debug -Message "Found $(($components | Measure-Object).Count) existing SQL Server instance components: $(($components | Foreach-Object { "$($_.InstanceName)($($_.InstanceType) $($_.Version.NameLevel))" }) -join ',')"
            # Filter for specific instance name
            if ($InstanceName) {
                $components = $components | Where-Object {$_.InstanceName -eq $InstanceName }
            }
            $upgrades = @()
            :actions foreach ($currentAction in $actions) {
                if (Test-PendingReboot -ComputerName $resolvedName) {
                    #Exit the actions loop altogether - nothing can be installed here anyways
                    Stop-Function -Message "$resolvedName is pending a reboot. Reboot the computer before proceeding." -Continue -ContinueLabel computers
                }
                # Pass only relevant components
                if ($currentAction.MajorVersion) {
                    Write-Message -Level Debug -Message "Limiting components to version $($currentAction.MajorVersion)"
                    $selectedComponents = $components | Where-Object { $_.Version.NameLevel -contains $currentAction.MajorVersion }
                    $currentAction.Remove('MajorVersion')
                } else {
                    $selectedComponents = $components
                }
                Write-ProgressHelper -ExcludePercent -Activity $activity -Message "Looking for a KB file for a chosen version"
                Write-Message -Level Debug -Message "Looking for appropriate KB file on $resolvedName with following params: $($currentAction | ConvertTo-Json -Depth 1 -Compress)"
                $upgradeDetails = Get-SqlServerUpdate @currentAction -ComputerName $resolvedName -Credential $Credential -Restart $Restart -Path $Path -Component $selectedComponents
                if ($upgradeDetails.Successful -contains $false) {
                    #Exit the actions loop altogether - upgrade cannot be performed
                    $upgradeDetails
                    Stop-Function -Message "Update cannot be applied to $resolvedName | $($upgradeDetails.Notes)" -Continue -ContinueLabel computers
                } else {
                    # update components to mirror the updated version - will be used for multi-step upgrades
                    foreach ($component in $components) {
                        if ($component.Version.NameLevel -in $upgradeDetails.TargetVersion.NameLevel) {
                            $component.Version = $upgradeDetails.TargetVersion | Where-Object NameLevel -eq $component.Version.NameLevel
                        }
                    }
                    $upgrades += $upgradeDetails
                }
            }
            if ($upgrades) {
                Write-ProgressHelper -ExcludePercent -Activity $activity -Message "Preparing installation"
                $chosenVersions = ($upgrades | ForEach-Object { "$($_.MajorVersion) to $($_.TargetLevel) (KB$($_.KB))" }) -join ', '
                if ($PSCmdlet.ShouldProcess($resolvedName, "Update $chosenVersions")) {
                    $installActions += [pscustomobject]@{
                        ComputerName = $resolvedName
                        Actions      = $upgrades
                    }
                } else {
                    $whatIfMode = $true
                }
            }
            Write-Progress -Activity $activity -Completed
        }
        # Declare the installation script
        $installScript = {
            $computer = $_.ComputerName
            Write-Message -Level Debug -Message "Processing $($computer) with $(($_.Actions | Measure-Object).Count) actions" -FunctionName Update-DbaInstance
            $activity = "Updating SQL Server components on $computer"
            #foreach action passed to the script for this particular computer
            foreach ($currentAction in $_.Actions) {
                $output = $currentAction
                $output.Successful = $false
                ## Start the installation sequence
                Write-ProgressHelper -ExcludePercent -Activity $activity -Message "Launching installation of $($currentAction.TargetLevel) KB$($currentAction.KB) ($($currentAction.Installer)) for SQL$($currentAction.MajorVersion) ($($currentAction.Build))"
                $execParams = @{
                    ComputerName = $computer
                    ErrorAction  = 'Stop'
                }
                if ($Credential) { $execParams += @{ Credential = $Credential }
                }
                # Find a temporary folder to extract to - the drive that has most free space
                $chosenDrive = (Get-DbaDiskSpace -ComputerName $computer -Credential $Credential | Sort-Object -Property Free -Descending | Select-Object -First 1).Name
                if (!$chosenDrive) {
                    # Fall back to the system drive
                    $chosenDrive = Invoke-Command2 -ComputerName $computer -Credential $Credential -ScriptBlock { $env:SystemDrive } -Raw -ErrorAction Stop
                }
                $spExtractPath = $chosenDrive.TrimEnd('\') + "\dbatools_KB$($currentAction.KB)_Extract"
                if ($spExtractPath) {
                    $output.ExtractPath = $spExtractPath
                    try {
                        # Extract file
                        Write-ProgressHelper -ExcludePercent -Activity $activity -Message "Extracting $($currentAction.Installer) to $spExtractPath"
                        Write-Message -Level Verbose -Message "Extracting $($currentAction.Installer) to $spExtractPath" -FunctionName Update-DbaInstance
                        $extractResult = Invoke-Program @execParams -Path $currentAction.Installer -ArgumentList "/x`:`"$spExtractPath`" /quiet" -EnableException $true
                        if (-not $extractResult.Successful) {
                            $output.Notes = "Extraction failed with exit code $($extractResult.ExitCode)"
                            Stop-Function -Message $output.Notes -FunctionName Update-DbaInstance
                            return $output
                        }
                        # Install the patch
                        if ($currentAction.InstanceName) {
                            $instanceClause = "/instancename=$($currentAction.InstanceName)"
                        } else {
                            $instanceClause = '/allinstances'
                        }
                        Write-ProgressHelper -ExcludePercent -Activity $activity -Message "Now installing update SQL$($currentAction.MajorVersion)$($currentAction.TargetLevel) from $spExtractPath"
                        Write-Message -Level Verbose -Message "Starting installation from $spExtractPath" -FunctionName Update-DbaInstance
                        $updateResult = Invoke-Program @execParams -Path "$spExtractPath\setup.exe" -ArgumentList @('/quiet', $instanceClause, '/IAcceptSQLServerLicenseTerms') -WorkingDirectory $spExtractPath -EnableException $true
                        if ($updateResult.Successful) {
                            $output.Successful = $true
                        } else {
                            $output.Notes = "Update failed with exit code $($updateResult.ExitCode)"
                            Stop-Function -Message $output.Notes -FunctionName Update-DbaInstance
                            return $output
                        }
                        $output.Log = $updateResult.stdout
                    } catch {
                        Stop-Function -Message "Upgrade failed" -ErrorRecord $_ -FunctionName Update-DbaInstance
                        $output.Notes = $_.Exception.Notes
                        return $output
                    } finally {
                        ## Cleanup temp
                        Write-ProgressHelper -ExcludePercent -Activity $activity -Message "Cleaning up extracted files from $spExtractPath"
                        try {
                            Write-ProgressHelper -ExcludePercent -Activity $activity -Message "Removing temporary files"
                            $null = Invoke-Command2 @execParams -ScriptBlock {
                                if ($args[0] -like '*\dbatools_KB*_Extract' -and (Test-Path $args[0])) {
                                    Remove-Item -Recurse -Force -LiteralPath $args[0] -ErrorAction Stop
                                }
                            } -Raw -ArgumentList $spExtractPath
                        } catch {
                            $message = "Failed to cleanup temp folder on computer $($computer)`: $($_.Exception.Message)"
                            Write-Message -Level Verbose -Message $message -FunctionName Update-DbaInstance
                            $output.Notes += $message
                        }
                    }
                }
                if ($Restart) {
                    # Restart the computer
                    Write-ProgressHelper -ExcludePercent -Activity $activity -Message "Restarting computer $($computer) and waiting for it to come back online"
                    Write-Message -Level Verbose "Restarting computer $($computer) and waiting for it to come back online" -FunctionName Update-DbaInstance
                    try {
                        $null = Restart-Computer @execParams -Wait -For WinRm -Force
                        $output.Restarted = $true
                    } catch {
                        Stop-Function -Message "Failed to restart computer" -ErrorRecord $_ -FunctionName Update-DbaInstance
                        return $output
                    }
                } else {
                    $output.Notes = "Restart is required for computer $($computer) to finish the installation of SQL$($currentAction.MajorVersion)$($currentAction.TargetLevel)"
                }
                $output
                Write-Progress -Activity $activity -Completed
            }
        }
        # check how many computers we are looking at and decide upon parallelism
        if ($installActions.Count -eq 1) {
            $installActions | ForEach-Object -Process $installScript | ForEach-Object -Process $outputHandler
        } elseif ($installActions.Count -ge 2) {
            $installActions | Invoke-Parallel -ImportModules -ImportVariables -ScriptBlock $installScript -Throttle $Throttle | ForEach-Object -Process $outputHandler
        } elseif (-not $whatIfMode) {
            Write-Message -Level Warning -Message "No applicable updates were found"
        }
    }
}

tools\dbatools\functions\Update-DbaServiceAccount.ps1

function Update-DbaServiceAccount {
    <#
    .SYNOPSIS
        Changes service account (or just its password) of the SQL Server service.

    .DESCRIPTION
        Reconfigure the service account or update the password of the specified SQL Server service. The service will be restarted in the event of changing the account.

    .PARAMETER ComputerName
        The target SQL Server instance or instances.

    .PARAMETER Credential
        Windows Credential with permission to log on to the server running the SQL instance

    .PARAMETER InputObject
        A collection of services. Basically, any object that has ComputerName and ServiceName properties. Can be piped from Get-DbaService.

    .PARAMETER ServiceName
        A name of the service on which the action is performed. E.g. MSSQLSERVER or SqlAgent$INSTANCENAME

    .PARAMETER ServiceCredential
        Windows Credential object under which the service will be setup to run. Cannot be used with -Username. For local service accounts use one of the following usernames with empty password:
        LOCALSERVICE
        NETWORKSERVICE
        LOCALSYSTEM

    .PARAMETER PreviousPassword
        An old password of the service account. Optional when run under local admin privileges.

    .PARAMETER SecurePassword
        New password of the service account. The function will ask for a password if not specified. MSAs and local system accounts will ignore the password.

    .PARAMETER Username
        Username of the service account. Cannot be used with -ServiceCredential. For local service accounts use one of the following usernames omitting the -SecurePassword parameter:
        LOCALSERVICE
        NETWORKSERVICE
        LOCALSYSTEM

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Service, SqlServer, Instance, Connect
        Author: Kirill Kravtsov (@nvarscar)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        Requires Local Admin rights on destination computer(s).

    .EXAMPLE
        PS C:\> $SecurePassword = ConvertTo-SecureString 'Qwerty1234' -AsPlainText -Force
        Update-DbaServiceAccount -ComputerName sql1 -ServiceName 'MSSQL$MYINSTANCE' -SecurePassword $SecurePassword

        Changes the current service account's password of the service MSSQL$MYINSTANCE to 'Qwerty1234'

    .EXAMPLE
        PS C:\> $cred = Get-Credential
        PS C:\> Get-DbaService sql1 -Type Engine,Agent -Instance MYINSTANCE | Update-DbaServiceAccount -ServiceCredential $cred

        Requests credentials from the user and configures them as a service account for the SQL Server engine and agent services of the instance sql1\MYINSTANCE

    .EXAMPLE
        PS C:\> Update-DbaServiceAccount -ComputerName sql1,sql2 -ServiceName 'MSSQLSERVER','SQLSERVERAGENT' -Username NETWORKSERVICE

        Configures SQL Server engine and agent services on the machines sql1 and sql2 to run under Network Service system user.

    .EXAMPLE
        PS C:\> Get-DbaService sql1 -Type Engine -Instance MSSQLSERVER | Update-DbaServiceAccount -Username 'MyDomain\sqluser1'

        Configures SQL Server engine service on the machine sql1 to run under MyDomain\sqluser1. Will request user to input the account password.

    #>
    [CmdletBinding(SupportsShouldProcess, DefaultParameterSetName = "ServiceName" )]
    param (
        [parameter(ParameterSetName = "ServiceName")]
        [Alias("cn", "host", "Server")]
        [DbaInstanceParameter[]]$ComputerName = $env:COMPUTERNAME,
        [PSCredential]$Credential,
        [parameter(ValueFromPipeline, Mandatory, ParameterSetName = "InputObject")]
        [Alias("ServiceCollection")]
        [object[]]$InputObject,
        [parameter(ParameterSetName = "ServiceName", Position = 1, Mandatory)]
        [Alias("Name", "Service")]
        [string[]]$ServiceName,
        [Alias("User")]
        [string]$Username,
        [PSCredential]$ServiceCredential,
        [securestring]$PreviousPassword = (New-Object System.Security.SecureString),
        [Alias("Password", "NewPassword")]
        [securestring]$SecurePassword = (New-Object System.Security.SecureString),
        [switch]$EnableException
    )
    begin {
        $svcCollection = @()
        $scriptAccountChange = {
            $service = $wmi.Services[$args[0]]
            $service.SetServiceAccount($args[1], $args[2])
            $service.Alter()
        }
        $scriptPasswordChange = {
            $service = $wmi.Services[$args[0]]
            $service.ChangePassword($args[1], $args[2])
            $service.Alter()
        }
        #Check parameters
        if ($Username) {
            $actionType = 'Account'
            if ($ServiceCredential) {
                Stop-Function -EnableException $EnableException -Message "You cannot specify both -UserName and -ServiceCredential parameters" -Category InvalidArgument
                return
            }
            #System logins should not have a domain name, whitespaces or passwords
            $trimmedUsername = (Split-Path $Username -Leaf).Trim().Replace(' ', '')
            #Request password input if password was not specified and account is not MSA or system login
            if ($SecurePassword.Length -eq 0 -and $PSBoundParameters.Keys -notcontains 'SecurePassword' -and $trimmedUsername -notin 'NETWORKSERVICE', 'LOCALSYSTEM', 'LOCALSERVICE' -and $Username.EndsWith('$') -eq $false -and $Username.StartsWith('NT Service\') -eq $false) {
                $SecurePassword = Read-Host -Prompt "Input new password for account $UserName" -AsSecureString
                $NewPassword2 = Read-Host -Prompt "Repeat password" -AsSecureString
                if ((New-Object System.Management.Automation.PSCredential ("user", $SecurePassword)).GetNetworkCredential().Password -ne `
                    (New-Object System.Management.Automation.PSCredential ("user", $NewPassword2)).GetNetworkCredential().Password) {
                    Stop-Function -Message "Passwords do not match" -Category InvalidArgument -EnableException $EnableException
                    return
                }
            }
            $currentCredential = New-Object System.Management.Automation.PSCredential ($Username, $SecurePassword)
        } elseif ($ServiceCredential) {
            $actionType = 'Account'
            $currentCredential = $ServiceCredential
        } else {
            $actionType = 'Password'
        }
        if ($actionType -eq 'Account') {
            #System logins should not have a domain name, whitespaces or passwords
            $credUserName = (Split-Path $currentCredential.UserName -Leaf).Trim().Replace(' ', '')
            #Check for system logins and replace the Credential object to simplify passing localsystem-like login names
            if ($credUserName -in 'NETWORKSERVICE', 'LOCALSYSTEM', 'LOCALSERVICE') {
                $currentCredential = New-Object System.Management.Automation.PSCredential ($credUserName, (New-Object System.Security.SecureString))
            }
        }
    }
    process {
        if ($PsCmdlet.ParameterSetName -match 'ServiceName') {
            foreach ($Computer in $ComputerName.ComputerName) {
                $Server = Resolve-DbaNetworkName -ComputerName $Computer -Credential $credential
                if ($Server.ComputerName) {
                    foreach ($service in $ServiceName) {
                        $svcCollection += [psobject]@{
                            ComputerName = $server.ComputerName
                            ServiceName  = $service
                        }
                    }
                } else {
                    Stop-Function -EnableException $EnableException -Message "Failed to connect to $Computer" -Continue
                }
            }
        } elseif ($PsCmdlet.ParameterSetName -match 'InputObject') {
            foreach ($service in $InputObject) {
                $Server = Resolve-DbaNetworkName -ComputerName $service.ComputerName -Credential $credential
                if ($Server.ComputerName) {
                    $svcCollection += [psobject]@{
                        ComputerName = $Server.ComputerName
                        ServiceName  = $service.ServiceName
                    }
                } else {
                    Stop-Function -EnableException $EnableException -Message "Failed to connect to $($service.ComputerName)" -Continue
                }
            }
        }

    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Update-DbaSqlServiceAccount

        foreach ($svc in $svcCollection) {
            if ($serviceObject = Get-DbaService -ComputerName $svc.ComputerName -ServiceName $svc.ServiceName -Credential $Credential -EnableException:$EnableException) {
                $outMessage = $outStatus = $agent = $null
                if ($actionType -eq 'Password' -and $SecurePassword.Length -eq 0) {
                    $currentPassword = Read-Host -Prompt "New password for $($serviceObject.StartName) ($($svc.ServiceName) on $($svc.ComputerName))" -AsSecureString
                    $currentPassword2 = Read-Host -Prompt "Repeat password" -AsSecureString
                    if ((New-Object System.Management.Automation.PSCredential ("user", $currentPassword)).GetNetworkCredential().Password -ne `
                        (New-Object System.Management.Automation.PSCredential ("user", $currentPassword2)).GetNetworkCredential().Password) {
                        Stop-Function -Message "Passwords do not match. This service will not be updated" -Category InvalidArgument -EnableException $EnableException -Continue
                    }
                } else {
                    $currentPassword = $SecurePassword
                }
                if ($serviceObject.ServiceType -eq 'Engine') {
                    #Get SQL Agent running status
                    $agent = Get-DbaService -ComputerName $svc.ComputerName -Type Agent -InstanceName $serviceObject.InstanceName
                }
                if ($PsCmdlet.ShouldProcess($serviceObject, "Changing account information for service $($svc.ServiceName) on $($svc.ComputerName)")) {
                    try {
                        if ($actionType -eq 'Account') {
                            Write-Message -Level Verbose -Message "Attempting an account change for service $($svc.ServiceName) on $($svc.ComputerName)"
                            $null = Invoke-ManagedComputerCommand -ComputerName $svc.ComputerName -Credential $Credential -ScriptBlock $scriptAccountChange -ArgumentList @($svc.ServiceName, $currentCredential.UserName, $currentCredential.GetNetworkCredential().Password) -EnableException:$EnableException
                            $outMessage = "The login account for the service has been successfully set."
                        } elseif ($actionType -eq 'Password') {
                            Write-Message -Level Verbose -Message "Attempting a password change for service $($svc.ServiceName) on $($svc.ComputerName)"
                            $null = Invoke-ManagedComputerCommand -ComputerName $svc.ComputerName -Credential $Credential -ScriptBlock $scriptPasswordChange -ArgumentList @($svc.ServiceName, (New-Object System.Management.Automation.PSCredential ("user", $PreviousPassword)).GetNetworkCredential().Password, (New-Object System.Management.Automation.PSCredential ("user", $currentPassword)).GetNetworkCredential().Password) -EnableException:$EnableException
                            $outMessage = "The password has been successfully changed."
                        }
                        $outStatus = 'Successful'
                    } catch {
                        $outStatus = 'Failed'
                        $outMessage = $_.Exception.Message
                        Write-Message -Level Warning -Message $_.Exception.Message -EnableException $EnableException.ToBool()
                    }
                } else {
                    $outStatus = 'Successful'
                    $outMessage = 'No changes made - running in -WhatIf mode.'
                }
                if ($serviceObject.ServiceType -eq 'Engine' -and $actionType -eq 'Account' -and $outStatus -eq 'Successful' -and $agent.State -eq 'Running') {
                    #Restart SQL Agent after SQL Engine has been restarted
                    if ($PsCmdlet.ShouldProcess($serviceObject, "Starting SQL Agent after Engine account change on $($svc.ComputerName)")) {
                        $res = Start-DbaService -ComputerName $svc.ComputerName -Type Agent -InstanceName $serviceObject.InstanceName
                        if ($res.Status -ne 'Successful') {
                            Write-Message -Level Warning -Message "Failed to restart SQL Agent after changing credentials. $($res.Message)"
                        }
                    }
                }
                $serviceObject = Get-DbaService -ComputerName $svc.ComputerName -ServiceName $svc.ServiceName -Credential $Credential -EnableException:$EnableException
                Add-Member -Force -InputObject $serviceObject -NotePropertyName Message -NotePropertyValue $outMessage
                Add-Member -Force -InputObject $serviceObject -NotePropertyName Status -NotePropertyValue $outStatus
                Select-DefaultView -InputObject $serviceObject -Property ComputerName, ServiceName, State, StartName, Status, Message
            } Else {
                Stop-Function -Message "The service $($svc.ServiceName) has not been found on $($svc.ComputerName)" -EnableException $EnableException -Continue
            }
        }
    }
}

tools\dbatools\functions\Set-DbaAgReplica.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Set-DbaAgReplica {
    <#
    .SYNOPSIS
        Sets the properties for a replica to an availability group on a SQL Server instance.

    .DESCRIPTION
        Sets the properties for a replica to an availability group on a SQL Server instance.

        Automatically creates a database mirroring endpoint if required.

   .PARAMETER SqlInstance
        The target SQL Server instance or instances. Server version must be SQL Server version 2012 or higher.

    .PARAMETER SqlCredential
        Login to the SqlInstance instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Replica
        The replicas to modify.

    .PARAMETER AvailabilityGroup
        The availability group of the replica.

    .PARAMETER AvailabilityMode
        Sets the availability mode of the availability group replica. Options are: AsynchronousCommit and SynchronousCommit. SynchronousCommit is default.

    .PARAMETER FailoverMode
        Sets the failover mode of the availability group replica. Options are Automatic and Manual.

    .PARAMETER BackupPriority
        Sets the backup priority availability group replica. Default is 50.

    .PARAMETER EndpointUrl
        The endpoint URL.

     .PARAMETER InputObject
        Enables piping from Get-DbaAgReplica.

    .PARAMETER ConnectionModeInPrimaryRole
        Sets the connection intent modes of an Availability Replica in primary role.

    .PARAMETER ConnectionModeInSecondaryRole
        Sets the connection modes of an Availability Replica in secondary role.

    .PARAMETER ReadonlyRoutingConnectionUrl
        Sets the read only routing connection url for the availability replica.

    .PARAMETER SeedingMode
        Specifies how the secondary replica will be initially seeded.

        Automatic enables direct seeding. This method will seed the secondary replica over the network. This method does not require you to backup and restore a copy of the primary database on the replica.

        Manual requires you to create a backup of the database on the primary replica and manually restore that backup on the secondary replica.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: AvailabilityGroup, HA, AG
        Author: Chrissy LeMaire (@cl), netnerds.net
        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Set-DbaAgReplica

    .EXAMPLE
        PS C:\> Set-DbaAgReplica -SqlInstance sql2016 -Replica sql2016 -AvailabilityGroup SharePoint -BackupPriority 5000

        Sets the backup priority to 5000 for the sql2016 replica for the SharePoint availability group on sql2016

    .EXAMPLE
        PS C:\> Get-DbaAgReplica -SqlInstance sql2016 | Out-GridView -Passthru | Set-DbaAgReplica -BackupPriority 5000

        Sets the backup priority to 5000 for the selected availability groups.
       #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'Medium')]
    param (
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string]$AvailabilityGroup,
        [string]$Replica,
        [ValidateSet('AsynchronousCommit', 'SynchronousCommit')]
        [string]$AvailabilityMode,
        [ValidateSet('Automatic', 'Manual', 'External')]
        [string]$FailoverMode,
        [int]$BackupPriority,
        [ValidateSet('AllowAllConnections', 'AllowReadWriteConnections')]
        [string]$ConnectionModeInPrimaryRole,
        [ValidateSet('AllowAllConnections', 'AllowNoConnections', 'AllowReadIntentConnectionsOnly')]
        [string]$ConnectionModeInSecondaryRole,
        [ValidateSet('Automatic', 'Manual')]
        [string]$SeedingMode,
        [string]$EndpointUrl,
        [string]$ReadonlyRoutingConnectionUrl,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.AvailabilityReplica]$InputObject,
        [switch]$EnableException
    )
    process {
        if (-not $InputObject) {
            if (-not $AvailabilityGroup -or -not $Replica) {
                Stop-Function -Message "You must specify an AvailabilityGroup and replica or pipe in an availabilty group to continue."
                return
            }
        }

        if ($SqlInstance) {
            $InputObject += Get-DbaAgReplica -SqlInstance $SqlInstance -SqlCredential $SqlCredential -AvailabilityGroup $AvailabilityGroup -Replica $Replica
        }

        foreach ($agreplica in $InputObject) {
            $server = $agreplica.Parent.Parent
            if ($Pscmdlet.ShouldProcess($server.Name, "Modifying replica for $($agreplica.Name) named $Name")) {
                try {
                    if ($EndpointUrl) {
                        $agreplica.EndpointUrl = $EndpointUrl
                    }

                    if ($FailoverMode) {
                        $agreplica.FailoverMode = [Microsoft.SqlServer.Management.Smo.AvailabilityReplicaFailoverMode]::$FailoverMode
                    }

                    if ($AvailabilityMode) {
                        $agreplica.AvailabilityMode = [Microsoft.SqlServer.Management.Smo.AvailabilityReplicaAvailabilityMode]::$AvailabilityMode
                    }

                    if ($ConnectionModeInPrimaryRole) {
                        $agreplica.ConnectionModeInPrimaryRole = [Microsoft.SqlServer.Management.Smo.AvailabilityReplicaConnectionModeInPrimaryRole]::$ConnectionModeInPrimaryRole
                    }

                    if ($ConnectionModeInSecondaryRole) {
                        $agreplica.ConnectionModeInSecondaryRole = [Microsoft.SqlServer.Management.Smo.AvailabilityReplicaConnectionModeInSecondaryRole]::$ConnectionModeInSecondaryRole
                    }

                    if ($BackupPriority) {
                        $agreplica.BackupPriority = $BackupPriority
                    }

                    if ($ReadonlyRoutingConnectionUrl) {
                        $agreplica.ReadonlyRoutingConnectionUrl = $ReadonlyRoutingConnectionUrl
                    }

                    if ($SeedingMode) {
                        $agreplica.SeedingMode = $SeedingMode
                    }

                    $agreplica.Alter()
                    $agreplica

                } catch {
                    Stop-Function -Message "Failure" -ErrorRecord $_ -Continue
                }
            }
        }
    }
}

tools\dbatools\functions\Watch-DbaDbLogin.ps1

function Watch-DbaDbLogin {
    <#
    .SYNOPSIS
        Tracks SQL Server logins: which host they came from, what database they're using, and what program is being used to log in.

    .DESCRIPTION
        Watch-DbaDbLogin uses SQL Server DMV's to track logins into a SQL Server table. This is helpful when you need to migrate a SQL Server and update connection strings, but have inadequate documentation on which servers/applications are logging into your SQL instance.

        Running this script every 5 minutes for a week should give you a sufficient idea about database and login usage.

    .PARAMETER SqlInstance
        The SQL Server that stores the Watch database.

    .PARAMETER SqlCms
        Specifies a Central Management Server to query for a list of servers to watch.

    .PARAMETER ServersFromFile
        Specifies a file containing a list of servers to watch. This file must contain one server name per line.

    .PARAMETER Database
        The name of the Watch database.

    .PARAMETER Table
        The name of the Watch table. By default, this is DbaTools-WatchDbLogins.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Login
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT
        Requires: sysadmin access on all SQL Servers for the most accurate results

    .LINK
        https://dbatools.io/Watch-DbaDbLogin

    .EXAMPLE
        PS C:\> Watch-DbaDbLogin -SqlInstance sqlserver -SqlCms SqlCms1

        A list of all database instances within the Central Management Server SqlCms1 is generated. Using this list, the script enumerates all the processes and gathers login information and saves it to the table Dblogins in the DatabaseLogins database on SQL Server sqlserver.

    .EXAMPLE
        PS C:\> Watch-DbaDbLogin -SqlInstance sqlcluster -Database CentralAudit -ServersFromFile .\sqlservers.txt

        A list of servers is gathered from the file sqlservers.txt in the current directory. Using this list, the script enumerates all the processes and gathers login information and saves it to the table Dblogins in the CentralAudit database on SQL Server sqlcluster.

    .EXAMPLE
        PS C:\> Watch-DbaDbLogin -SqlInstance sqlserver -SqlCms SqlCms1 -SqlCredential $cred

        A list of servers is generated using database instance names within the SQL2014Clusters group on the Central Management Server SqlCms1. Using this list, the script enumerates all the processes and gathers login information and saves it to the table Dblogins in the DatabaseLogins database on sqlserver.

    #>
    [CmdletBinding(DefaultParameterSetName = "Default")]
    param (
        [parameter(Mandatory)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstance]$SqlInstance,
        [object]$Database,
        [string]$Table = "DbaTools-WatchDbLogins",
        [PSCredential]$SqlCredential,

        # Central Management Server
        [string]$SqlCms,

        # File with one server per line
        [string]$ServersFromFile,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        if (Test-Bound 'SqlCms', 'ServersFromFile' -Not) {
            Stop-Function -Message "You must specify a server list source using -SqlCms or -ServersFromFile"
            return
        }

        try {
            $serverDest = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential
        } catch {
            Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $SqlInstance -Continue
        }

        $systemdbs = "master", "msdb", "model", "tempdb"
        $excludedPrograms = "Microsoft SQL Server Management Studio - Query", "SQL Management"

        <#
            Get servers to query from Central Management Server or File
        #>
        if ($SqlCms) {
            try {
                $servers = Get-DbaCmsRegServerName -SqlInstance $SqlCms -SqlCredential $SqlCredential -EnableException
            } catch {
                Stop-Function -Message "The CMS server, $SqlCms, was not accessible." -Target $SqlCms -ErrorRecord $_
                return
            }
        }
        if (Test-Bound 'ServersFromFile') {
            if (Test-Path $ServersFromFile) {
                $servers = Get-Content $ServersFromFile
            } else {
                Stop-Function -Message "$ServersFromFile was not found." -Target $ServersFromFile
                return
            }
        }

        <#
            Process each server
        #>
        foreach ($instance in $servers) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            if (!(Test-SqlSa $server)) {
                Write-Message -Level Warning -Message "Not a sysadmin on $instance, resultset would be underwhelming. Skipping.";
                continue
            }

            $sql = "
            SELECT
                s.login_time AS [LoginTime]
                , s.login_name AS [Login]
                , ISNULL(s.host_name,N'') AS [Host]
                , ISNULL(s.program_name,N'') AS [Program]
                , ISNULL(r.database_id,N'') AS [DatabaseId]
                , ISNULL(DB_NAME(r.database_id),N'') AS [Database]
                , CAST(~s.is_user_process AS bit) AS [IsSystem]
                , CaptureTime = (SELECT GETDATE())
            FROM sys.dm_exec_sessions AS s
            LEFT OUTER JOIN sys.dm_exec_requests AS r
                ON r.session_id = s.session_id"
            Write-Message -Level Debug -Message $sql

            $procs = $server.Query($sql) | Where-Object { $_.Host -ne $instance.ComputerName -and ![string]::IsNullOrEmpty($_.Host) }
            $procs = $procs | Where-Object { $systemdbs -notcontains $_.Database -and $excludedPrograms -notcontains $_.Program }

            if ($procs.Count -gt 0) {
                $procs | Select-Object @{Label = "ComputerName"; Expression = {$server.ComputerName}}, @{Label = "InstanceName"; Expression = {$server.ServiceName}}, @{Label = "SqlInstance"; Expression = {$server.DomainInstanceName}}, LoginTime, Login, Host, Program, DatabaseId, Database, IsSystem, CaptureTime | ConvertTo-DbaDataTable | Write-DbaDataTable -SqlInstance $serverDest -Database $Database -Table $Table -AutoCreateTable

                Write-Message -Level Output -Message "Added process information for $instance to datatable."
            } else {
                Write-Message -Level Verbose -Message "No data returned for $instance."
            }
        }
    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Watch-SqlDbLogin
    }
}

tools\dbatools\functions\Start-DbaEndpoint.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Start-DbaEndpoint {
    <#
    .SYNOPSIS
        Starts endpoints on a SQL Server instance.

    .DESCRIPTION
        Starts endpoints on a SQL Server instance.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Endpoint
        Only start specific endpoints.

    .PARAMETER AllEndpoints
        Start all endpoints on an instance.

    .PARAMETER InputObject
        Enables piping from Get-Endpoint.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Endpoint
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Start-DbaEndpoint

    .EXAMPLE
        PS C:\> Start-DbaEndpoint -SqlInstance sqlserver2012 -AllEndpoints

        Starts all endpoints on the sqlserver2014 instance.

    .EXAMPLE
        PS C:\> Start-DbaEndpoint -SqlInstance sqlserver2012 -Endpoint endpoint1,endpoint2 -SqlCredential sqladmin

        Logs into sqlserver2012 using alternative credentials and starts the endpoint1 and endpoint2 endpoints.

    .EXAMPLE
        PS C:\> Get-Endpoint -SqlInstance sqlserver2012 -Endpoint endpoint1 | Start-DbaEndpoint

        Starts the endpoints returned from the Get-Endpoint function.

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'Low')]
    param (
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$EndPoint,
        [switch]$AllEndpoints,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Endpoint[]]$InputObject,
        [switch]$EnableException
    )

    process {
        if ((Test-Bound -ParameterName SqlInstance) -And (Test-Bound -Not -ParameterName Endpoint, AllEndpoints)) {
            Stop-Function -Message "You must specify AllEndpoints or Endpoint when using the SqlInstance parameter."
            return
        }
        foreach ($instance in $SqlInstance) {
            $InputObject += Get-DbaEndpoint -SqlInstance $instance -SqlCredential $SqlCredential -EndPoint $Endpoint
        }

        foreach ($ep in $InputObject) {
            try {
                if ($Pscmdlet.ShouldProcess($ep.Parent.Name, "Starting $ep")) {
                    $ep.Start()
                    $ep
                }
            } catch {
                Stop-Function -Message "Failure" -ErrorRecord $_ -Continue
            }
        }
    }
}

tools\dbatools\functions\Start-DbaTrace.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Start-DbaTrace {
    <#
    .SYNOPSIS
        Starts SQL Server traces

    .DESCRIPTION
        Starts SQL Server traces

    .PARAMETER SqlInstance
        The target SQL Server instance

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Id
        A list of trace ids

    .PARAMETER InputObject
        Internal parameter for piping

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Security, Trace
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Start-DbaTrace -SqlInstance sql2008

        Starts all traces on sql2008

    .EXAMPLE
        PS C:\> Start-DbaTrace -SqlInstance sql2008 -Id 1

        Starts all trace with ID 1 on sql2008

    .EXAMPLE
        PS C:\> Get-DbaTrace -SqlInstance sql2008 | Out-GridView -PassThru | Start-DbaTrace

        Starts selected traces on sql2008

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [int[]]$Id,
        [parameter(ValueFromPipeline)]
        [object[]]$InputObject,
        [switch]$EnableException
    )
    process {
        if (-not $InputObject -and $SqlInstance) {
            $InputObject = Get-DbaTrace -SqlInstance $SqlInstance -SqlCredential $SqlCredential -Id $Id
        }

        foreach ($trace in $InputObject) {
            if (-not $trace.id -and -not $trace.Parent) {
                Stop-Function -Message "Input is of the wrong type. Use Get-DbaTrace." -Continue
                return
            }

            $server = $trace.Parent
            $traceid = $trace.id
            $default = Get-DbaTrace -SqlInstance $server -Default

            if ($default.id -eq $traceid) {
                Stop-Function -Message "The default trace on $server cannot be started. Use Set-DbaSpConfigure to turn it on." -Continue
            }

            $sql = "sp_trace_setstatus $traceid, 1"
            if ($Pscmdlet.ShouldProcess($traceid, "Starting the TraceID on $server")) {
                try {
                    $server.Query($sql)
                    Get-DbaTrace -SqlInstance $server -Id $traceid
                } catch {
                    Stop-Function -Message "Failure" -ErrorRecord $_ -Target $server -Continue
                    return
                }
            }
        }
    }
}

tools\dbatools\functions\Stop-DbaEndpoint.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Stop-DbaEndpoint {
    <#
    .SYNOPSIS
        Stops endpoints on a SQL Server instance.

    .DESCRIPTION
        Stops endpoints on a SQL Server instance.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Endpoint
        Only stop specific endpoints.

    .PARAMETER AllEndpoints
        Stops all endpoints on an instance.

    .PARAMETER InputObject
        Enables piping from Get-Endpoint.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Endpoint
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Stop-DbaEndpoint

    .EXAMPLE
        PS C:\> Stop-DbaEndpoint -SqlInstance sql2017a -AllEndpoints

        Stops all endpoints on the sqlserver2014 instance.

    .EXAMPLE
        PS C:\> Stop-DbaEndpoint -SqlInstance sql2017a -Endpoint endpoint1,endpoint2

        Stops the endpoint1 and endpoint2 endpoints.

    .EXAMPLE
        PS C:\> Get-Endpoint -SqlInstance sql2017a -Endpoint endpoint1 | Stop-DbaEndpoint

        Stops the endpoints returned from the Get-Endpoint command.

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'High')]
    param (
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$EndPoint,
        [switch]$AllEndpoints,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Endpoint[]]$InputObject,
        [switch]$EnableException
    )

    process {
        if ((Test-Bound -ParameterName SqlInstance) -And (Test-Bound -Not -ParameterName Endpoint, AllEndpoints)) {
            Stop-Function -Message "You must specify AllEndpoints or Endpoint when using the SqlInstance parameter."
            return
        }
        foreach ($instance in $SqlInstance) {
            $InputObject += Get-DbaEndpoint -SqlInstance $instance -SqlCredential $SqlCredential -EndPoint $Endpoint
        }

        foreach ($ep in $InputObject) {
            try {
                if ($Pscmdlet.ShouldProcess($ep.Parent.Name, "Stopping $ep")) {
                    $ep.Stop()
                    $ep
                }
            } catch {
                Stop-Function -Message "Failure" -ErrorRecord $_ -Continue
            }
        }
    }
}

tools\dbatools\functions\Stop-DbaXESmartTarget.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Stop-DbaXESmartTarget {
    <#
    .SYNOPSIS
        Stops an XESmartTarget PowerShell job. Useful if you want to run a target, but not right now.

    .DESCRIPTION
        Stops an XESmartTarget PowerShell job. Useful if you want to run a target, but not right now.

    .PARAMETER InputObject
        The XESmartTarget job object.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: ExtendedEvent, XE, XEvent
        Author: Chrissy LeMaire (@cl) | SmartTarget by Gianluca Sartori (@spaghettidba)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Stop-DbaXESmartTarget
        https://github.com/spaghettidba/XESmartTarget/wiki

    .EXAMPLE
        PS C:\> Get-DbaXESmartTarget | Stop-DbaXESmartTarget

        Stops all XESmartTarget jobs.

    .EXAMPLE
        PS C:\> Get-DbaXESmartTarget | Where-Object Id -eq 2 | Stop-DbaXESmartTarget

        Stops a specific XESmartTarget job.

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [object[]]$InputObject,
        [switch]$EnableException
    )
    process {
        if ($Pscmdlet.ShouldProcess("localhost", "Stopping job $id")) {
            try {
                $id = $InputObject.Id
                Write-Message -Level Output -Message "Stopping job $id, this may take a couple minutes."
                Get-Job -ID $InputObject.Id | Stop-Job
                Write-Message -Level Output -Message "Successfully Stopped $id. If you need to remove the job for good, use Remove-DbaXESmartTarget."
            } catch {
                Stop-Function -Message "Failure" -ErrorRecord $_
            }
        }
    }
}

tools\dbatools\functions\Sync-DbaAvailabilityGroup.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Sync-DbaAvailabilityGroup {
    <#
    .SYNOPSIS
        Syncs depdendent objects such as jobs, logins and custom errors for availability groups

    .DESCRIPTION
        Syncs depdendent objects for availability groups. Such objects include:

        SpConfigure
        CustomErrors
        Credentials
        DatabaseMail
        LinkedServers
        Logins
        LoginPermissions
        SystemTriggers
        DatabaseOwner
        AgentCategory
        AgentOperator
        AgentAlert
        AgentProxy
        AgentSchedule
        AgentJob

        Note that any of these can be excluded. For specific object exclusions (such as a single job), using the underlying Copy-Dba* command will be required.

        This command does not filter by which logins are in use by the ag databases or which linked servers are used. All objects that are not excluded will be copied like hulk smash.

    .PARAMETER Primary
        The primary SQL Server instance. Server version must be SQL Server version 2012 or higher.

    .PARAMETER PrimarySqlCredential
        Login to the primary instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Secondary
        The target SQL Server instance or instances. Server version must be SQL Server version 2012 or higher.

    .PARAMETER SecondarySqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER AvailabilityGroup
        The name of the Availability Group.

    .PARAMETER Exclude
        Exclude one or more objects to export

        SpConfigure
        CustomErrors
        Credentials
        DatabaseMail
        LinkedServers
        Logins
        LoginPermissions
        SystemTriggers
        DatabaseOwner
        AgentCategory
        AgentOperator
        AgentAlert
        AgentProxy
        AgentSchedule
        AgentJob

    .PARAMETER Login
        Specific logins to sync. If unspecified, all logins will be processed.

    .PARAMETER ExcludeLogin
        Specific logins to exclude when performing the sync. If unspecified, all logins will be processed.

    .PARAMETER Job
        Specific jobs to sync. If unspecified, all logins will be processed.

    .PARAMETER ExcludeJob
         Specific jobs to exclude when performing the sync. If unspecified, all logins will be processed.

    .PARAMETER InputObject
        Enables piping from Get-DbaAvailabilityGroup.

    .PARAMETER Force
        If this switch is enabled, the objects will dropped and recreated on Destination.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: HA
        Author: Chrissy LeMaire (@cl), netnerds.net
        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Sync-DbaAvailabilityGroup

    .EXAMPLE
        PS C:\> Sync-DbaAvailabilityGroup -Primary sql2016a -AvailabilityGroup db3

        Syncs the following on all replicas found in the db3 AG:
        SpConfigure, CustomErrors, Credentials, DatabaseMail, LinkedServers
        Logins, LoginPermissions, SystemTriggers, DatabaseOwner, AgentCategory,
        AgentOperator, AgentAlert, AgentProxy, AgentScheduleAgentJob

    .EXAMPLE
        PS C:\> Get-DbaAvailabilityGroup -SqlInstance sql2016a | Sync-DbaAvailabilityGroup -ExcludeType LoginPermissions, LinkedServers -ExcludeLogin login1, login2 -Job job1, job2

        Syncs the following on all replicas found in the db3 AG:
        SpConfigure, CustomErrors, Credentials, DatabaseMail, Logins,
        SystemTriggers, DatabaseOwner, AgentCategory, AgentOperator
        AgentAlert, AgentProxy, AgentScheduleAgentJob.

        Copies all logins except for login1 and login2 and only syncs job1 and job2

    .EXAMPLE
        PS C:\> Get-DbaAvailabilityGroup -SqlInstance sql2016a | Sync-DbaAvailabilityGroup -WhatIf

        Shows what would happen if the command were to run but doesn't actually perform the action.
    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'Medium')]
    param (
        [DbaInstanceParameter]$Primary,
        [PSCredential]$PrimarySqlCredential,
        [DbaInstanceParameter[]]$Secondary,
        [PSCredential]$SecondarySqlCredential,
        [string]$AvailabilityGroup,
        [Alias("ExcludeType")]
        [ValidateSet('AgentCategory', 'AgentOperator', 'AgentAlert', 'AgentProxy', 'AgentSchedule', 'AgentJob', 'Credentials', 'CustomErrors', 'DatabaseMail', 'DatabaseOwner', 'LinkedServers', 'Logins', 'LoginPermissions', 'SpConfigure', 'SystemTriggers')]
        [string[]]$Exclude,
        [string[]]$Login,
        [string[]]$ExcludeLogin,
        [string[]]$Job,
        [string[]]$ExcludeJob,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.AvailabilityGroup[]]$InputObject,
        [switch]$Force,
        [switch]$EnableException
    )
    begin {
        $allcombos = @()
    }
    process {
        if (-not $AvailabilityGroup -and -not $Secondary -and -not $InputObject) {
            Stop-Function -Message "You must specify a secondary or an availability group."
            return
        }

        if ($InputObject) {
            $server = $InputObject.Parent
        } else {
            try {
                $server = Connect-SqlInstance -SqlInstance $Primary -SqlCredential $PrimarySqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $Primary
                return
            }
        }

        if ($AvailabilityGroup) {
            $InputObject += Get-DbaAvailabilityGroup -SqlInstance $server -AvailabilityGroup $AvailabilityGroup
        }

        if ($InputObject) {
            $Secondary += (($InputObject.AvailabilityReplicas | Where-Object Name -ne $server.DomainInstanceName).Name | Select-Object -Unique)
        }

        if ($Secondary) {
            $Secondary = $Secondary | Sort-Object
            $secondaries = @()
            foreach ($computer in $Secondary) {
                try {
                    $secondaries += Connect-SqlInstance -SqlInstance $computer -SqlCredential $SecondarySqlCredential
                } catch {
                    Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $Primary
                    return
                }
            }
        }

        $thiscombo = [pscustomobject]@{
            PrimaryServer   = $server
            SecondaryServer = $secondaries
        }

        # In the event that someone pipes in an availability group, this will keep the syncer from running a bunch of times
        $dupe = $false

        foreach ($ag in $allcombos) {
            if ($ag.PrimaryServer.Name -eq $thiscombo.PrimaryServer.Name -and
                $ag.SecondaryServer.Name.ToString() -eq $thiscombo.SecondaryServer.Name.ToString()) {
                $dupe = $true
            }
        }

        if ($dupe -eq $false) {
            $allcombos += $thiscombo
        }
    }

    end {
        if (Test-FunctionInterrupt) { return }

        # now that all combinations have been figured out, begin sync without duplicating work
        foreach ($ag in $allcombos) {
            $server = $ag.PrimaryServer
            $secondaries = $ag.SecondaryServer

            $stepCounter = 0
            $activity = "Syncing availability group $AvailabilityGroup"

            if (-not $secondaries) {
                Stop-Function -Message "No secondaries found."
                return
            }

            $primaryserver = $server.Name
            $secondaryservers = $secondaries.Name -join ", "

            if ($Exclude -notcontains "SpConfigure") {
                if ($PSCmdlet.ShouldProcess("Syncing SQL Server Configuration from $primaryserver to $secondaryservers")) {
                    Write-ProgressHelper -Activity $activity -StepNumber ($stepCounter++) -Message "Syncing SQL Server Configuration"
                    Copy-DbaSpConfigure -Source $server -Destination $secondaries
                }
            }

            if ($Exclude -notcontains "Logins") {
                if ($PSCmdlet.ShouldProcess("Syncing logins from $primaryserver to $secondaryservers")) {
                    Write-ProgressHelper -Activity $activity -StepNumber ($stepCounter++) -Message "Syncing logins"
                    Copy-DbaLogin -Source $server -Destination $secondaries -ExcludeLogin $ExcludeLogin -Force:$Force
                }
            }

            if ($Exclude -notcontains "DatabaseOwner") {
                if ($PSCmdlet.ShouldProcess("Updating database owners to match newly migrated logins from $primaryserver to $secondaryservers")) {
                    Write-ProgressHelper -Activity $activity -StepNumber ($stepCounter++) -Message "Updating database owners to match newly migrated logins"
                    foreach ($sec in $secondaries) {
                        $null = Update-SqlDbOwner -Source $server -Destination $sec
                    }
                }
            }

            if ($Exclude -notcontains "CustomErrors") {
                if ($PSCmdlet.ShouldProcess("Syncing custom errors (user defined messages) from $primaryserver to $secondaryservers")) {
                    Write-ProgressHelper -Activity $activity -StepNumber ($stepCounter++) -Message "Syncing custom errors (user defined messages)"
                    Copy-DbaCustomError -Source $server -Destination $secondaries -Force:$Force
                }
            }

            if ($Exclude -notcontains "Credentials") {
                if ($PSCmdlet.ShouldProcess("Syncing SQL credentials from $primaryserver to $secondaryservers")) {
                    Write-ProgressHelper -Activity $activity -StepNumber ($stepCounter++) -Message "Syncing SQL credentials"
                    Copy-DbaCredential -Source $server -Destination $secondaries -Force:$Force
                }
            }

            if ($Exclude -notcontains "DatabaseMail") {
                if ($PSCmdlet.ShouldProcess("Syncing database mail from $primaryserver to $secondaryservers")) {
                    Write-ProgressHelper -Activity $activity -StepNumber ($stepCounter++) -Message "Syncing database mail"
                    Copy-DbaDbMail -Source $server -Destination $secondaries -Force:$Force
                }
            }

            if ($Exclude -notcontains "LinkedServers") {
                if ($PSCmdlet.ShouldProcess("Syncing linked servers from $primaryserver to $secondaryservers")) {
                    Write-ProgressHelper -Activity $activity -StepNumber ($stepCounter++) -Message "Syncing linked servers"
                    Copy-DbaLinkedServer -Source $server -Destination $secondaries -Force:$Force
                }
            }

            if ($Exclude -notcontains "SystemTriggers") {
                if ($PSCmdlet.ShouldProcess("Syncing System Triggers from $primaryserver to $secondaryservers")) {
                    Write-ProgressHelper -Activity $activity -StepNumber ($stepCounter++) -Message "Syncing System Triggers"
                    Copy-DbaServerTrigger -Source $server -Destination $secondaries -Force:$Force
                }
            }

            if ($Exclude -notcontains "AgentCategory") {
                if ($PSCmdlet.ShouldProcess("Syncing Agent Categories from $primaryserver to $secondaryservers")) {
                    Write-ProgressHelper -Activity $activity -StepNumber ($stepCounter++) -Message "Syncing Agent Categories"
                    Copy-DbaAgentJobCategory -Source $server -Destination $secondaries -Force:$force
                    $secondaries.JobServer.JobCategories.Refresh()
                    $secondaries.JobServer.OperatorCategories.Refresh()
                    $secondaries.JobServer.AlertCategories.Refresh()
                }
            }

            if ($Exclude -notcontains "AgentOperator") {
                if ($PSCmdlet.ShouldProcess("Syncing Agent Operators from $primaryserver to $secondaryservers")) {
                    Write-ProgressHelper -Activity $activity -StepNumber ($stepCounter++) -Message "Syncing Agent Operators"
                    Copy-DbaAgentOperator -Source $server -Destination $secondaries -Force:$force
                    $secondaries.JobServer.Operators.Refresh()
                }
            }

            if ($Exclude -notcontains "AgentAlert") {
                if ($PSCmdlet.ShouldProcess("Syncing Agent Alerts from $primaryserver to $secondaryservers")) {
                    Write-ProgressHelper -Activity $activity -StepNumber ($stepCounter++) -Message "Syncing Agent Alerts"
                    Copy-DbaAgentAlert -Source $server -Destination $secondaries -Force:$force -IncludeDefaults
                    $secondaries.JobServer.Alerts.Refresh()
                }
            }

            if ($Exclude -notcontains "AgentProxy") {
                if ($PSCmdlet.ShouldProcess("Syncing Agent Proxy Accounts from $primaryserver to $secondaryservers")) {
                    Write-ProgressHelper -Activity $activity -StepNumber ($stepCounter++) -Message "Syncing Agent Proxy Accounts"
                    Copy-DbaAgentProxy -Source $server -Destination $secondaries -Force:$force
                    $secondaries.JobServer.ProxyAccounts.Refresh()
                }
            }

            if ($Exclude -notcontains "AgentSchedule") {
                if ($PSCmdlet.ShouldProcess("Syncing Agent Schedules from $primaryserver to $secondaryservers")) {
                    Write-ProgressHelper -Activity $activity -StepNumber ($stepCounter++) -Message "Syncing Agent Schedules"
                    Copy-DbaAgentSchedule -Source $server -Destination $secondaries -Force:$force
                    $secondaries.JobServer.SharedSchedules.Refresh()
                    $secondaries.JobServer.Refresh()
                    $secondaries.Refresh()
                }
            }

            if ($Exclude -notcontains "AgentJob") {
                if ($PSCmdlet.ShouldProcess("Syncing Agent Jobs from $primaryserver to $secondaryservers")) {
                    Write-ProgressHelper -Activity $activity -StepNumber ($stepCounter++) -Message "Syncing Agent Jobs"
                    Copy-DbaAgentJob -Source $server -Destination $secondaries -Force:$force -Job $Job -ExcludeJob $ExcludeJob
                }
            }

            if ($Exclude -notcontains "LoginPermissions") {
                if ($PSCmdlet.ShouldProcess("Syncing login permissions from $primaryserver to $secondaryservers")) {
                    Write-ProgressHelper -Activity $activity -StepNumber ($stepCounter++) -Message "Syncing login permissions"
                    Sync-DbaLoginPermission -Source $server -Destination $secondaries -Login $Login -ExcludeLogin $ExcludeLogin
                }
            }
        }
    }
}

tools\dbatools\internal\configurations\settings\assets.ps1

<#
This is designed for all online assets you need configurations for.
#>

# The default path where dbatools stores persistent data
Set-DbatoolsConfig -FullName 'assets.sqlbuildreference' -Value 'https://sqlcollaborative.github.io/assets/dbatools-buildref-index.json' -Initialize -Validation string -Handler { } -Description "The url where dbatools fetches the up to date buildreference index (e.g. for Get-DbaBuildReference)"

tools\dbatools\functions\Test-DbaLinkedServerConnection.ps1

function Test-DbaLinkedServerConnection {
    <#
    .SYNOPSIS
        Test all linked servers from the sql servers passed

    .DESCRIPTION
        Test each linked server on the instance

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Credential object used to connect to the SQL Server as a different user

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.

        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: LinkedServer
        Author: Thomas LaRock ( https://thomaslarock.com )

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Test-DbaLinkedServerConnection

    .EXAMPLE
        PS C:\> Test-DbaLinkedServerConnection -SqlInstance DEV01

        Test all Linked Servers for the SQL Server instance DEV01

    .EXAMPLE
        PS C:\> Test-DbaLinkedServerConnection -SqlInstance sql2016 | Out-File C:\temp\results.txt

        Test all Linked Servers for the SQL Server instance sql2016 and output results to file

    .EXAMPLE
        PS C:\> Test-DbaLinkedServerConnection -SqlInstance sql2016, sql2014, sql2012

        Test all Linked Servers for the SQL Server instances sql2016, sql2014 and sql2012

    .EXAMPLE
        PS C:\> $servers = "sql2016","sql2014","sql2012"
        PS C:\> $servers | Test-DbaLinkedServerConnection -SqlCredential sqladmin

        Test all Linked Servers for the SQL Server instances sql2016, sql2014 and sql2012 using SQL login credentials

    .EXAMPLE
        PS C:\> $servers | Get-DbaLinkedServer | Test-DbaLinkedServerConnection

        Test all Linked Servers for the SQL Server instances sql2016, sql2014 and sql2012

    #>
    [CmdletBinding()]
    param (
        [Parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstance[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        foreach ($instance in $SqlInstance) {
            if ($instance.LinkedLive) {
                $linkedServerCollection = $instance.LinkedServer
            } else {
                try {
                    $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
                } catch {
                    Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
                }
            }

            $linkedServerCollection = $server.LinkedServers

            foreach ($ls in $linkedServerCollection) {
                Write-Message -Level Verbose -Message "Testing linked server $($ls.name) on server $($ls.parent.name)"
                try {
                    $null = $ls.TestConnection()
                    $result = "Success"
                    $connectivity = $true
                } catch {
                    $result = $_.Exception.InnerException.InnerException.Message
                    $connectivity = $false
                }

                New-Object Sqlcollaborative.Dbatools.Validation.LinkedServerResult($ls.parent.ComputerName, $ls.parent.ServiceName, $ls.parent.DomainInstanceName, $ls.Name, $ls.DataSource, $connectivity, $result)
            }
        }
    }
}

tools\dbatools\functions\Test-DbaLoginPassword.ps1

function Test-DbaLoginPassword {
    <#
    .SYNOPSIS
        Test-DbaLoginPassword finds any logins on SQL instance that are SQL Logins and have a password that is either null or same as the login

    .DESCRIPTION
        The purpose of this function is to find SQL Server logins that have no password or the same password as login. You can add your own password to check for or add them to a csv file.
        By default it will test for empty password and the same password as username.

    .PARAMETER SqlInstance
        The SQL Server instance you're checking logins on. You must have sysadmin access and server version must be SQL Server version 2008 or higher.

    .PARAMETER SqlCredential
        Allows you to login to servers using SQL Logins instead of Windows Authentication (AKA Integrated or Trusted). To use:

        $scred = Get-Credential, then pass $scred object to the -SqlCredential parameter.

        Windows Authentication will be used if SqlCredential is not specified. SQL Server does not accept Windows credentials being passed as credentials.

        To connect as a different Windows user, run PowerShell as that user.

    .PARAMETER Dictionary
        Specifies a list of passwords to include in the test for weak passwords.

    .PARAMETER Login
        The login(s) to process.

    .PARAMETER InputObject
        Allows piping from Get-DbaLogin.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Login, Security
        Author: Peter Samuelsson

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Test-DbaLoginPassword

    .EXAMPLE
        PS C:\> Test-DbaLoginPassword -SqlInstance Dev01

        Test all SQL logins that the password is null or same as username on SQL server instance Dev01

    .EXAMPLE
        PS C:\> Test-DbaLoginPassword -SqlInstance Dev01 -Login sqladmin

        Test the 'sqladmin' SQL login that the password is null or same as username on SQL server instance Dev01

    .EXAMPLE
        PS C:\> Test-DbaLoginPassword -SqlInstance Dev01 -Dictionary Test1,test2

        Test all SQL logins that the password is null, same as username or Test1,Test2 on SQL server instance Dev0

    .EXAMPLE
        PS C:\> Get-DbaLogin -SqlInstance "sql2017","sql2016" | Test-DbaLoginPassword

        Test all logins on sql2017 and sql2016

    .EXAMPLE
        PS C:\> $servers | Get-DbaLogin | Out-GridView -PassThru | Test-DbaLoginPassword

        Test selected logins on all servers in the $servers variable

    #>
    [CmdletBinding()]
    param (
        [Alias("ServerInstance", "SqlServer", "SqlServers")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [String[]]$Login,
        [String[]]$Dictionary,
        [Parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Login[]]$InputObject,
        [switch]$EnableException
    )

    begin {
        $CheckPasses = "''", "'@@Name'"
        if ($Dictionary) {
            $Dictionary | ForEach-Object { $CheckPasses += "'" + $psitem + "'" }
        }

        foreach ($CheckPass in $CheckPasses) {
            if ($CheckPasses.IndexOf($CheckPass) -eq 0) {
                $checks = "SELECT " + $CheckPass
            } else {
                $checks += "
        UNION SELECT " + $CheckPass
            }
        }

        $sql = "DECLARE @WeakPwdList TABLE(WeakPwd NVARCHAR(255))
            --Define weak password list
            --Use @@Name if users password contain their name
            INSERT INTO @WeakPwdList(WeakPwd)
            $checks

            SELECT SERVERPROPERTY('MachineName') AS [ComputerName],
                ISNULL(SERVERPROPERTY('InstanceName'), 'MSSQLSERVER') AS InstanceName,
                SERVERPROPERTY('ServerName') AS [SqlInstance],
                SysLogins.name as SqlLogin,
                WeakPassword = 'True',
                REPLACE(WeakPassword.WeakPwd,'@@Name',SysLogins.name) As [Password],
                SysLogins.is_disabled as Disabled,
                SysLogins.create_date as CreatedDate,
                SysLogins.modify_date as ModifiedDate,
                SysLogins.default_database_name as DefaultDatabase
            FROM sys.sql_logins SysLogins
            INNER JOIN @WeakPwdList WeakPassword ON (PWDCOMPARE(WeakPassword.WeakPwd, password_hash) = 1
                OR PWDCOMPARE(REPLACE(WeakPassword.WeakPwd,'@@Name',SysLogins.name),password_hash) = 1)"
    }
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential -MinimumVersion 10
                Write-Message -Message "Connected to: $instance." -Level Verbose
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }
            $InputObject += Get-DbaLogin -SqlInstance $server -Login $Login
        }

        $logins += $InputObject
    }
    end {
        $servers = $logins | Select-Object -Unique -ExpandProperty Parent
        $names = $logins | Select-Object -Unique -ExpandProperty Name

        foreach ($serverinstance in $servers) {
            Write-Message -Level Debug -Message "Executing $sql"
            Write-Message -Level Verbose -Message "Testing: same username as Password"
            Write-Message -Level Verbose -Message "Testing: the following Passwords $CheckPasses"
            try {
                $serverinstance.Query("$sql") | Where-Object SqlLogin -in $names
            } catch {
                Stop-Function -Message "Failure" -ErrorRecord $_ -Target $serverinstance -Continue
            }
        }
    }
}

tools\dbatools\functions\Test-DbaOptimizeForAdHoc.ps1

function Test-DbaOptimizeForAdHoc {
    <#
    .SYNOPSIS
        Displays information relating to SQL Server Optimize for AdHoc Workloads setting.  Works on SQL Server 2008-2016.

    .DESCRIPTION
        When this option is set, plan cache size is further reduced for single-use ad hoc OLTP workload.

        More info: https://msdn.microsoft.com/en-us/library/cc645587.aspx
        http://www.sqlservercentral.com/blogs/glennberry/2011/02/25/some-suggested-sql-server-2008-r2-instance-configuration-settings/

        These are just general recommendations for SQL Server and are a good starting point for setting the "optimize for ad-hoc workloads" option.

    .PARAMETER SqlInstance
        A collection of one or more SQL Server instance names to query.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message. This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting. Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Configure, SPConfigure
        Author: Brandon Abshire, netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Test-DbaOptimizeForAdHoc

    .EXAMPLE
        PS C:\> Test-DbaOptimizeForAdHoc -SqlInstance sql2008, sqlserver2012

        Validates whether Optimize for AdHoc Workloads setting is enabled for servers sql2008 and sqlserver2012.

    #>
    [CmdletBinding()]
    param (
        [parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer", "SqlServers")]
        [DbaInstance[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        $notesAdHocZero = "Recommended configuration is 1 (enabled)."
        $notesAsRecommended = "Configuration is already set as recommended."
        $recommendedValue = 1
    }
    process {

        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential -MinimumVersion 10
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            #Get current configured value
            $optimizeAdHoc = $server.Configuration.OptimizeAdhocWorkloads.ConfigValue

            #Setting notes for optimize adhoc value
            if ($optimizeAdHoc -eq $recommendedValue) {
                $notes = $notesAsRecommended
            } else {
                $notes = $notesAdHocZero
            }

            [pscustomobject]@{
                ComputerName             = $server.ComputerName
                InstanceName             = $server.ServiceName
                SqlInstance              = $server.DomainInstanceName
                CurrentOptimizeAdHoc     = $optimizeAdHoc
                RecommendedOptimizeAdHoc = $recommendedValue
                Notes                    = $notes
            }
        }
    }
}

tools\dbatools\functions\Test-DbaPath.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Test-DbaPath {
    <#
    .SYNOPSIS
        Tests if file or directory exists from the perspective of the SQL Server service account.

    .DESCRIPTION
        Uses master.dbo.xp_fileexist to determine if a file or directory exists.

    .PARAMETER SqlInstance
        The SQL Server you want to run the test on.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Path
        The Path to test. This can be a file or directory

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Path, ServiceAccount
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Test-DbaPath

    .EXAMPLE
        PS C:\> Test-DbaPath -SqlInstance sqlcluster -Path L:\MSAS12.MSSQLSERVER\OLAP

        Tests whether the service account running the "sqlcluster" SQL Server instance can access L:\MSAS12.MSSQLSERVER\OLAP. Logs into sqlcluster using Windows credentials.

    .EXAMPLE
        PS C:\> $credential = Get-Credential
        PS C:\> Test-DbaPath -SqlInstance sqlcluster -SqlCredential $credential -Path L:\MSAS12.MSSQLSERVER\OLAP

        Tests whether the service account running the "sqlcluster" SQL Server instance can access L:\MSAS12.MSSQLSERVER\OLAP. Logs into sqlcluster using SQL authentication.

    #>
    [CmdletBinding()]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseOutputTypeCorrectly", "", Justification = "PSSA Rule Ignored by BOH")]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Parameter(Mandatory)]
        [object]$Path,
        [Alias('Silent')]
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -ErrorRecord $_ -Target $instance -Continue
            }
            $counter = [pscustomobject] @{ Value = 0 }
            $groupSize = 100
            $RawPath = $Path
            $Path = [string[]]$Path
            $groups = $Path | Group-Object -Property { [math]::Floor($counter.Value++ / $groupSize) }
            foreach ($g in $groups) {
                $PathsBatch = $g.Group
                $query = @()
                foreach ($p in $PathsBatch) {
                    $query += "EXEC master.dbo.xp_fileexist '$p'"
                }
                $sql = $query -join ';'
                $batchresult = $server.ConnectionContext.ExecuteWithResults($sql)
                if ($Path.Count -eq 1 -and $SqlInstance.Count -eq 1 -and (-not($RawPath -is [array]))) {
                    if ($batchresult.Tables.rows[0] -eq $true -or $batchresult.Tables.rows[1] -eq $true) {
                        return $true
                    } else {
                        return $false
                    }
                } else {
                    $i = 0
                    foreach ($r in $batchresult.tables.rows) {
                        $DoesPass = $r[0] -eq $true -or $r[1] -eq $true
                        [pscustomobject]@{
                            SqlInstance  = $server.Name
                            InstanceName = $server.ServiceName
                            ComputerName = $server.ComputerName
                            FilePath     = $PathsBatch[$i]
                            FileExists   = $DoesPass
                            IsContainer  = $r[1] -eq $true
                        }
                        $i += 1
                    }
                }
            }
        }

    }
    end {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Test-SqlPath
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -EnableException:$false -Alias Test-DbaSqlPath
    }
}

tools\dbatools\functions\Test-DbaServerName.ps1

function Test-DbaServerName {
    <#
    .SYNOPSIS
        Tests to see if it's possible to easily rename the server at the SQL Server instance level, or if it even needs to be changed.

    .DESCRIPTION
        When a SQL Server's host OS is renamed, the SQL Server should be as well. This helps with Availability Groups and Kerberos.

        This command helps determine if your OS and SQL Server names match, and whether a rename is required.

        It then checks conditions that would prevent a rename, such as database mirroring and replication.

        https://www.mssqltips.com/sqlservertip/2525/steps-to-change-the-server-name-for-a-sql-server-machine/

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Detailed
        Output all properties, will be deprecated in 1.0.0 release.

    .PARAMETER ExcludeSsrs
        If this switch is enabled, checking for SQL Server Reporting Services will be skipped.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: SPN, ServerName
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Test-DbaServerName

    .EXAMPLE
        PS C:\> Test-DbaServerName -SqlInstance sqlserver2014a

        Returns ServerInstanceName, SqlServerName, IsEqual and RenameRequired for sqlserver2014a.

    .EXAMPLE
        PS C:\> Test-DbaServerName -SqlInstance sqlserver2014a, sql2016

        Returns ServerInstanceName, SqlServerName, IsEqual and RenameRequired for sqlserver2014a and sql2016.

    .EXAMPLE
        PS C:\> Test-DbaServerName -SqlInstance sqlserver2014a, sql2016 -ExcludeSsrs

        Returns ServerInstanceName, SqlServerName, IsEqual and RenameRequired for sqlserver2014a and sql2016, but skips validating if SSRS is installed on both instances.

    .EXAMPLE
        PS C:\> Test-DbaServerName -SqlInstance sqlserver2014a, sql2016 | Select-Object *

        Returns ServerInstanceName, SqlServerName, IsEqual and RenameRequired for sqlserver2014a and sql2016.
        If a Rename is required, it will also show Updatable, and Reasons if the server name is not updatable.

    #>
    [CmdletBinding()]
    [OutputType([System.Collections.ArrayList])]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstance[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [switch]$Detailed,
        [Alias("NoWarning")]
        [switch]$ExcludeSsrs,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        Test-DbaDeprecation -DeprecatedOn 1.0.0 -Parameter Detailed
        Test-DbaDeprecation -DeprecatedOn 1.0.0 -Parameter NoWarning
    }
    process {

        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential -MinimumVersion 9
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            if ($server.IsClustered) {
                Write-Message -Level Warning -Message "$instance is a cluster. Renaming clusters is not supported by Microsoft."
            }

            $sqlInstanceName = $server.Query("SELECT @@servername AS ServerName").ServerName
            $instance = $server.InstanceName

            if ($instance.Length -eq 0) {
                $serverInstanceName = $server.NetName
                $instance = "MSSQLSERVER"
            } else {
                $netname = $server.NetName
                $serverInstanceName = "$netname\$instance"
            }

            $serverInfo = [PSCustomObject]@{
                ComputerName   = $server.NetName
                ServerName     = $sqlInstanceName
                InstanceName   = $server.ServiceName
                SqlInstance    = $server.DomainInstanceName
                RenameRequired = $serverInstanceName -ne $sqlInstanceName
                Updatable      = "N/A"
                Warnings       = $null
                Blockers       = $null
            }

            $reasons = @()
            $ssrsService = "SQL Server Reporting Services ($instance)"

            Write-Message -Level Verbose -Message "Checking for $serverName on $netBiosName"
            $rs = $null
            if ($SkipSsrs -eq $false -or $NoWarning -eq $false) {
                try {
                    $rs = Get-DbaService -ComputerName $instance.ComputerName -InstanceName $server.ServiceName -Type SSRS -EnableException -WarningAction Stop
                } catch {
                    Write-Message -Level Warning -Message "Unable to pull information on $ssrsService." -ErrorRecord $_ -Target $instance
                }
            }

            if ($null -ne $rs -or $rs.Count -gt 0) {
                if ($rs.State -eq 'Running') {
                    $rstext = "$ssrsService must be stopped and updated."
                } else {
                    $rstext = "$ssrsService exists. When it is started again, it must be updated."
                }
                $serverInfo.Warnings = $rstext
            } else {
                $serverInfo.Warnings = "N/A"
            }

            # check for mirroring
            $mirroredDb = $server.Databases | Where-Object { $_.IsMirroringEnabled -eq $true }

            Write-Message -Level Debug -Message "Found the following mirrored dbs: $($mirroredDb.Name)"

            if ($mirroredDb.Length -gt 0) {
                $dbs = $mirroredDb.Name -join ", "
                $reasons += "Databases are being mirrored: $dbs"
            }

            # check for replication
            $sql = "SELECT name FROM sys.databases WHERE is_published = 1 OR is_subscribed = 1 OR is_distributor = 1"
            Write-Message -Level Debug -Message "SQL Statement: $sql"
            $replicatedDb = $server.Query($sql)

            if ($replicatedDb.Count -gt 0) {
                $dbs = $replicatedDb.Name -join ", "
                $reasons += "Database(s) are involved in replication: $dbs"
            }

            # check for even more replication
            $sql = "SELECT srl.remote_name as RemoteLoginName FROM sys.remote_logins srl JOIN sys.sysservers sss ON srl.server_id = sss.srvid"
            Write-Message -Level Debug -Message "SQL Statement: $sql"
            $results = $server.Query($sql)

            if ($results.RemoteLoginName.Count -gt 0) {
                $remoteLogins = $results.RemoteLoginName -join ", "
                $reasons += "Remote logins still exist: $remoteLogins"
            }

            if ($reasons.Length -gt 0) {
                $serverInfo.Updatable = $false
                $serverInfo.Blockers = $reasons
            } else {
                $serverInfo.Updatable = $true
                $serverInfo.Blockers = "N/A"
            }

            $serverInfo | Select-DefaultView -ExcludeProperty InstanceName, SqlInstance
        }
    }
}

tools\dbatools\functions\Update-dbatools.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Update-Dbatools {
    <#
    .SYNOPSIS
        Exported function. Updates dbatools. Deletes current copy and replaces it with freshest copy.

    .DESCRIPTION
        Exported function. Updates dbatools. Deletes current copy and replaces it with freshest copy.

    .PARAMETER Development
        If this switch is enabled, the current development branch will be installed. By default, the latest official release is installed.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .NOTES
        Tags: Module
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Update-DbaTools

    .EXAMPLE
        PS C:\> Update-Dbatools

        Updates dbatools. Deletes current copy and replaces it with freshest copy.

    .EXAMPLE
        PS C:\> Update-Dbatools -dev

        Updates dbatools to the current development branch. Deletes current copy and replaces it with latest from github.

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "Low")]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseSingularNouns", "", Justification = "It is the proper noun of the cmdlet")]
    param(
        [Alias("dev", "devbranch")]
        [switch]$Development,
        [Alias('Silent')]
        [switch]$EnableException
    )
    $MyModuleBase = [SqlCollaborative.Dbatools.dbaSystem.SystemHost]::ModuleBase
    $InstallScript = join-path -path $MyModuleBase -ChildPath "install.ps1";
    if ($Development) {
        Write-Message -Level Verbose -Message "Installing dev/beta channel via $Installscript.";
        if ($PSCmdlet.ShouldProcess("development branch", "Updating dbatools")) {
            & $InstallScript -beta;
        }
    } else {
        Write-Message -Level Verbose -Message "Installing release version via $Installscript."
        if ($PSCmdlet.ShouldProcess("release branch", "Updating dbatools")) {
            & $InstallScript;
        }
    }
}

tools\dbatools\functions\Set-DbaAgListener.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Set-DbaAgListener {
    <#
    .SYNOPSIS
        Sets a listener property for an availability group on a SQL Server instance.

    .DESCRIPTION
        Sets a listener property for an availability group on a SQL Server instance.

        Basically, only the port is settable at this time, so this command updates the listener port.

   .PARAMETER SqlInstance
        The target SQL Server instance or instances. Server version must be SQL Server version 2012 or higher.

    .PARAMETER SqlCredential
        Login to the SqlInstance instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER AvailabilityGroup
        The Availability Group to which a property will be changed.

    .PARAMETER Port
        Sets the port number used to communicate with the availability group.

    .PARAMETER Listener
        Modify only specific listeners.

    .PARAMETER InputObject
        Enables piping from Get-DbaAvailabilityGroup

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: AvailabilityGroup, HA, AG
        Author: Chrissy LeMaire (@cl), netnerds.net
        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Set-DbaAgListener

    .EXAMPLE
        PS C:\> Set-DbaAgListener -SqlInstance sql2017 -AvailabilityGroup SharePoint -Port 14333

        Changes the port for the SharePoint AG Listener on sql2017. Prompts for confirmation.

    .EXAMPLE
        PS C:\> Get-DbaAgListener -SqlInstance sql2017 | Out-GridView -Passthru | Set-DbaAgListener -Port 1433 -Confirm:$false

        Changes the port for selected AG listeners to 1433. Does not prompt for confirmation.
    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'High')]
    param (
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$AvailabilityGroup,
        [string[]]$Listener,
        [Parameter(Mandatory)]
        [int]$Port,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.AvailabilityGroup[]]$InputObject,
        [switch]$EnableException
    )
    process {
        if ((Test-Bound -ParameterName SqlInstance) -and (Test-Bound -Not -ParameterName AvailabilityGroup)) {
            Stop-Function -Message "You must specify one or more databases and one or more Availability Groups when using the SqlInstance parameter."
            return
        }

        if ($SqlInstance) {
            $InputObject += Get-DbaAgListener -SqlInstance $SqlInstance -SqlCredential $SqlCredential -AvailabilityGroup $AvailabilityGroup -Listener $Listener
        }

        foreach ($aglistener in $InputObject) {
            if ($Pscmdlet.ShouldProcess($ag.Parent.Name, "Setting port to $Port for $($ag.Name)")) {
                try {
                    $aglistener.PortNumber = $Port
                    $aglistener.Alter()
                    $aglistener
                } catch {
                    Stop-Function -Message "Failure" -ErrorRecord $_
                }
            }
        }
    }
}

tools\dbatools\functions\Set-DbaAgentServer.ps1

function Set-DbaAgentServer {
    <#
    .SYNOPSIS
        Set-DbaAgentServer updates properties of a SQL Agent Server.

    .DESCRIPTION
        Set-DbaAgentServer updates properties in the SQL Server Server with parameters supplied.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2000 or greater.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER InputObject
        Enables piping agent server objects

    .PARAMETER AgentLogLevel
        Specifies the agent log level.
        Allowed values 1, "Errors", 2, "Warnings", 3, "Errors, Warnings", 4, "Informational", 5, "Errors, Informational", 6, "Warnings, Informational", 7, "All"
        The text value can either be lowercase, uppercase or something in between as long as the text is correct.

    .PARAMETER AgentMailType
        Specifies the agent mail type.
        Allowed values 0, "SqlAgentMail", 1, "DatabaseMail"
        The text value can either be lowercase, uppercase or something in between as long as the text is correct.

    .PARAMETER AgentShutdownWaitTime
        The Agent Shutdown Wait Time value of the server agent.

    .PARAMETER DatabaseMailProfile
        The Database Mail Profile to be used. Must exists on database mail profiles.

    .PARAMETER ErrorLogFile
        Error log file location

    .PARAMETER IdleCpuDuration
        Idle CPU Duration value to be used

    .PARAMETER IdleCpuPercentage
        Idle CPU Percentage value to be used

    .PARAMETER CpuPolling
        Enable or Disable the Polling.
        Allowed values Enabled, Disabled

    .PARAMETER LocalHostAlias
        The value for Local Host Alias configuration

    .PARAMETER LoginTimeout
        The value for Login Timeout configuration

    .PARAMETER MaximumHistoryRows
        Indicates the Maximum job history log size (in rows). If you want to turn it off use the value -1

    .PARAMETER MaximumJobHistoryRows
        Indicates the Maximum job history rows per job. If you want to turn it off use the value 0

    .PARAMETER NetSendRecipient
        The Net send recipient value

    .PARAMETER ReplaceAlertTokens
        Enable or Disable the Token replacement property.
        Allowed values Enabled, Disabled

    .PARAMETER SaveInSentFolder
        Enable or Disable the copy of the sent messages is save in the Sent Items folder.
        Allowed values Enabled, Disabled

    .PARAMETER SqlAgentAutoStart
        Enable or Disable the SQL Agent Auto Start.
        Allowed values Enabled, Disabled

    .PARAMETER SqlAgentMailProfile
        The SQL Server Agent Mail Profile to be used. Must exists on database mail profiles.

    .PARAMETER SqlAgentRestart
        Enable or Disable the SQL Agent Restart.
        Allowed values Enabled, Disabled

    .PARAMETER SqlServerRestart
        Enable or Disable the SQL Server Restart.
        Allowed values Enabled, Disabled

    .PARAMETER WriteOemErrorLog
        Enable or Disable the Write OEM Error Log.
        Allowed values Enabled, Disabled

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Agent, Server
        Author: Cláudio Silva (@claudioessilva), https://claudioessilva.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Set-DbaAgentServer

    .EXAMPLE
        PS C:\> Set-DbaAgentServer -SqlInstance sql1 -MaximumHistoryRows 10000 -MaximumJobHistoryRows 100

        Changes the job history retention to 10000 rows with an maximum of 100 rows per job.

    .EXAMPLE
        PS C:\> Set-DbaAgentServer -SqlInstance sql1 -CpuPolling Enabled

        Enable the CPU Polling configurations.

    .EXAMPLE
        PS C:\> Set-DbaAgentServer -SqlInstance sql1, sql2, sql3 -AgentLogLevel 'Errors, Warnings'

        Set the agent log level to Errors and Warnings on multiple servers.

    .EXAMPLE
        PS C:\> Set-DbaAgentServer -SqlInstance sql1 -CpuPolling Disabled

        Disable the CPU Polling configurations.

    #>
    [CmdletBinding(SupportsShouldProcess = $true, ConfirmImpact = "Low")]
    param (
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Agent.JobServer[]]$InputObject,
        [ValidateSet(1, "Errors", 2, "Warnings", 3, "Errors, Warnings", 4, "Informational", 5, "Errors, Informational", 6, "Warnings, Informational", 7, "All")]
        [object]$AgentLogLevel,
        [ValidateSet(0, "SqlAgentMail", 1, "DatabaseMail")]
        [object]$AgentMailType,
        [int]$AgentShutdownWaitTime,
        [string]$DatabaseMailProfile,
        [string]$ErrorLogFile,
        [int]$IdleCpuDuration,
        [int]$IdleCpuPercentage,
        [ValidateSet("Enabled", "Disabled")]
        [string]$CpuPolling,
        [string]$LocalHostAlias,
        [int]$LoginTimeout,
        [int]$MaximumHistoryRows,
        [int]$MaximumJobHistoryRows,
        [string]$NetSendRecipient,
        [ValidateSet("Enabled", "Disabled")]
        [string]$ReplaceAlertTokens,
        [ValidateSet("Enabled", "Disabled")]
        [string]$SaveInSentFolder,
        [ValidateSet("Enabled", "Disabled")]
        [string]$SqlAgentAutoStart,
        [string]$SqlAgentMailProfile,
        [ValidateSet("Enabled", "Disabled")]
        [string]$SqlAgentRestart,
        [ValidateSet("Enabled", "Disabled")]
        [string]$SqlServerRestart,
        [ValidateSet("Enabled", "Disabled")]
        [string]$WriteOemErrorLog,
        [switch]$EnableException
    )

    begin {
        # Check of the agent mail type is of type string and set the integer value
        if (($AgentMailType -notin 0, 1) -and ($null -ne $AgentMailType)) {
            $AgentMailType = switch ($AgentMailType) { "SqlAgentMail" { 0 } "DatabaseMail" { 1 } }
        }

        # Check of the agent log level is of type string and set the integer value
        if (($AgentLogLevel -notin 0, 1) -and ($null -ne $AgentLogLevel)) {
            $AgentLogLevel = switch ($AgentLogLevel) { "Errors" { 1 } "Warnings" { 2 } "Errors, Warnings" { 3 } "Informational" { 4 } "Errors, Informational" { 5 } "Warnings, Informational" { 6 } "All" { 7 } }
        }
    }
    process {

        if (Test-FunctionInterrupt) { return }

        if ((-not $InputObject) -and (-not $SqlInstance)) {
            Stop-Function -Message "You must specify an Instance or pipe in results from another command" -Target $sqlinstance
            return
        }

        foreach ($instance in $sqlinstance) {
            # Try connecting to the instance
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            $InputObject += $server.JobServer
            $InputObject.Refresh()
        }

        foreach ($jobServer in $InputObject) {
            $server = $jobServer.Parent

            #region job server options
            # Settings the options for the job server
            if ($AgentLogLevel) {
                Write-Message -Message "Setting Agent log level to $AgentLogLevel" -Level Verbose
                $jobServer.AgentLogLevel = $AgentLogLevel
            }

            if ($AgentMailType) {
                Write-Message -Message "Setting Agent Mail Type to $AgentMailType" -Level Verbose
                $jobServer.AgentMailType = $AgentMailType
            }

            if ($AgentShutdownWaitTime) {
                Write-Message -Message "Setting Agent Shutdown Wait Time to $AgentShutdownWaitTime" -Level Verbose
                $jobServer.AgentShutdownWaitTime = $AgentShutdownWaitTime
            }

            if ($DatabaseMailProfile) {
                if ($DatabaseMailProfile -in (Get-DbaDbMail -SqlInstance $server).Profiles.Name) {
                    Write-Message -Message "Setting Database Mail Profile to $DatabaseMailProfile" -Level Verbose
                    $jobServer.DatabaseMailProfile = $DatabaseMailProfile
                } else {
                    Write-Message -Message "Database mail profile not found on $server" -Level Warning
                }
            }

            if ($ErrorLogFile) {
                Write-Message -Message "Setting agent server ErrorLogFile to $ErrorLogFile" -Level Verbose
                $jobServer.ErrorLogFile = $ErrorLogFile
            }

            if ($IdleCpuDuration) {
                Write-Message -Message "Setting agent server IdleCpuDuration to $IdleCpuDuration" -Level Verbose
                $jobServer.IdleCpuDuration = $IdleCpuDuration
            }

            if ($IdleCpuPercentage) {
                Write-Message -Message "Setting agent server IdleCpuPercentage to $IdleCpuPercentage" -Level Verbose
                $jobServer.IdleCpuPercentage = $IdleCpuPercentage
            }

            if ($CpuPolling) {
                Write-Message -Message "Setting agent server IsCpuPollingEnabled to $IsCpuPollingEnabled" -Level Verbose
                $jobServer.IsCpuPollingEnabled = if ($CpuPolling -eq "Enabled") {$true} else {$false}
            }

            if ($LocalHostAlias) {
                Write-Message -Message "Setting agent server LocalHostAlias to $LocalHostAlias" -Level Verbose
                $jobServer.LocalHostAlias = $LocalHostAlias
            }

            if ($LoginTimeout) {
                Write-Message -Message "Setting agent server LoginTimeout to $LoginTimeout" -Level Verbose
                $jobServer.LoginTimeout = $LoginTimeout
            }

            if ($MaximumHistoryRows) {
                Write-Message -Message "Setting agent server MaximumHistoryRows to $MaximumHistoryRows" -Level Verbose
                $jobServer.MaximumHistoryRows = $MaximumHistoryRows
            }

            if ($MaximumJobHistoryRows) {
                Write-Message -Message "Setting agent server MaximumJobHistoryRows to $MaximumJobHistoryRows" -Level Verbose
                $jobServer.MaximumJobHistoryRows = $MaximumJobHistoryRows
            }

            if ($NetSendRecipient) {
                Write-Message -Message "Setting agent server NetSendRecipient to $NetSendRecipient" -Level Verbose
                $jobServer.NetSendRecipient = $NetSendRecipient
            }

            if ($ReplaceAlertTokens) {
                Write-Message -Message "Setting agent server ReplaceAlertTokensEnabled to $ReplaceAlertTokens" -Level Verbose
                $jobServer.ReplaceAlertTokens = if ($ReplaceAlertTokens -eq "Enabled") {$true} else {$false}
            }

            if ($SaveInSentFolder) {
                Write-Message -Message "Setting agent server SaveInSentFolder to $SaveInSentFolder" -Level Verbose
                $jobServer.SaveInSentFolder = if ($SaveInSentFolder -eq "Enabled") {$true} else {$false}
            }

            if ($SqlAgentAutoStart) {
                Write-Message -Message "Setting agent server SqlAgentAutoStart to $SqlAgentAutoStart" -Level Verbose
                $jobServer.SqlAgentAutoStart = if ($SqlAgentAutoStart -eq "Enabled") {$true} else {$false}
            }

            if ($SqlAgentMailProfile) {
                Write-Message -Message "Setting agent server SqlAgentMailProfile to $SqlAgentMailProfile" -Level Verbose
                $jobServer.SqlAgentMailProfile = $SqlAgentMailProfile
            }

            if ($SqlAgentRestart) {
                Write-Message -Message "Setting agent server SqlAgentRestart to $SqlAgentRestart" -Level Verbose
                $jobServer.SqlAgentRestart = if ($SqlAgentRestart -eq "Enabled") {$true} else {$false}
            }

            if ($SqlServerRestart) {
                Write-Message -Message "Setting agent server SqlServerRestart to $SqlServerRestart" -Level Verbose
                $jobServer.SqlServerRestart = if ($SqlServerRestart -eq "Enabled") {$true} else {$false}
            }

            if ($WriteOemErrorLog) {
                Write-Message -Message "Setting agent server WriteOemErrorLog to $WriteOemErrorLog" -Level Verbose
                $jobServer.WriteOemErrorLog = if ($WriteOemErrorLog -eq "Enabled") {$true} else {$false}
            }

            #endregion server agent options

            # Execute
            if ($PSCmdlet.ShouldProcess($SqlInstance, "Changing the agent server")) {
                try {
                    Write-Message -Message "Changing the agent server" -Level Verbose

                    # Change the agent server
                    $jobServer.Alter()
                } catch {
                    Stop-Function -Message "Something went wrong changing the agent server" -ErrorRecord $_ -Target $instance -Continue
                }

                Get-DbaAgentServer -SqlInstance $server | Where-Object Name -eq $jobServer.name
            }
        }
    }
    end {
        Write-Message -Message "Finished changing agent server(s)" -Level Verbose
    }
}

tools\dbatools\functions\Set-DbaAgentSchedule.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Set-DbaAgentSchedule {
    <#
    .SYNOPSIS
        Set-DbaAgentSchedule updates a schedule in the msdb database.

    .DESCRIPTION
        Set-DbaAgentSchedule will help update a schedule for a job. It does not attach the schedule to a job.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2000 or greater.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Job
        The name of the job that has the schedule.

    .PARAMETER ScheduleName
        The name of the schedule.

    .PARAMETER NewName
        The new name for the schedule.

    .PARAMETER Enabled
        Set the schedule to enabled.

    .PARAMETER Disabled
        Set the schedule to disabled.

    .PARAMETER FrequencyType
        A value indicating when a job is to be executed.
        Allowed values are 1, "Once", 4, "Daily", 8, "Weekly", 16, "Monthly", 32, "MonthlyRelative", 64, "AgentStart", 128 or "IdleComputer"

    .PARAMETER FrequencyInterval
        The days that a job is executed
        Allowed values are 1, "Sunday", 2, "Monday", 4, "Tuesday", 8, "Wednesday", 16, "Thursday", 32, "Friday", 64, "Saturday", 62, "Weekdays", 65, "Weekend", 127, "EveryDay".
        If 62, "Weekdays", 65, "Weekend", 127, "EveryDay" is used it overwwrites any other value that has been passed before.

    .PARAMETER FrequencySubdayType
        Specifies the units for the subday FrequencyInterval.
        Allowed values are 1, "Time", 2, "Seconds", 4, "Minutes", 8 or "Hours"

    .PARAMETER FrequencySubdayInterval
        The number of subday type periods to occur between each execution of a job.

    .PARAMETER FrequencySubdayInterval
        The number of subday type periods to occur between each execution of a job.

    .PARAMETER FrequencyRelativeInterval
        A job's occurrence of FrequencyInterval in each month, if FrequencyInterval is 32 (monthlyrelative).

    .PARAMETER FrequencyRecurrenceFactor
        The number of weeks or months between the scheduled execution of a job. FrequencyRecurrenceFactor is used only if FrequencyType is 8, "Weekly", 16, "Monthly", 32 or "MonthlyRelative".

    .PARAMETER StartDate
        The date on which execution of a job can begin.

    .PARAMETER EndDate
        The date on which execution of a job can stop.

    .PARAMETER StartTime
        The time on any day to begin execution of a job. Format HHMMSS / 24 hour clock.
        Example: '010000' for 01:00:00 AM.
        Example: '140000' for 02:00:00 PM.

    .PARAMETER EndTime
        The time on any day to end execution of a job. Format HHMMSS / 24 hour clock.
        Example: '010000' for 01:00:00 AM.
        Example: '140000' for 02:00:00 PM.

    .PARAMETER Owner
        The name of the server principal that owns the schedule. If no value is given the schedule is owned by the creator.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER Force
        The force parameter will ignore some errors in the parameters and assume defaults.
        It will also remove the any present schedules with the same name for the specific job.

    .NOTES
        Tags: Agent, Job, JobStep
        Author: Sander Stad (@sqlstad, sqlstad.nl)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Set-DbaAgentSchedule

    .EXAMPLE
        PS C:\> Set-DbaAgentSchedule -SqlInstance sql1 -Job Job1 -ScheduleName daily -Enabled

        Changes the schedule for Job1 with the name 'daily' to enabled

    .EXAMPLE
        PS C:\> Set-DbaAgentSchedule -SqlInstance sql1 -Job Job1 -ScheduleName daily -NewName weekly -FrequencyType Weekly -FrequencyInterval Monday, Wednesday, Friday

        Changes the schedule for Job1 with the name daily to have a new name weekly

    .EXAMPLE
        PS C:\> Set-DbaAgentSchedule -SqlInstance sql1 -Job Job1, Job2, Job3 -ScheduleName daily -StartTime '230000'

        Changes the start time of the schedule for Job1 to 11 PM for multiple jobs

    .EXAMPLE
        PS C:\> Set-DbaAgentSchedule -SqlInstance sql1, sql2, sql3 -Job Job1 -ScheduleName daily -Enabled

        Changes the schedule for Job1 with the name daily to enabled on multiple servers

    .EXAMPLE
        PS C:\> sql1, sql2, sql3 | Set-DbaAgentSchedule -Job Job1 -ScheduleName 'daily' -Enabled

        Changes the schedule for Job1 with the name 'daily' to enabled on multiple servers using pipe line

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "Low")]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Parameter(Mandatory, ValueFromPipeline)]
        [ValidateNotNullOrEmpty()]
        [object[]]$Job,
        [Parameter(Mandatory, ValueFromPipeline)]
        [ValidateNotNullOrEmpty()]
        [string]$ScheduleName,
        [string]$NewName,
        [switch]$Enabled,
        [switch]$Disabled,
        [ValidateSet(1, "Once", 4, "Daily", 8, "Weekly", 16, "Monthly", 32, "MonthlyRelative", 64, "AgentStart", 128, "IdleComputer")]
        [object]$FrequencyType,
        [object[]]$FrequencyInterval,
        [ValidateSet(1, "Time", 2, "Seconds", 4, "Minutes", 8, "Hours")]
        [object]$FrequencySubdayType,
        [int]$FrequencySubdayInterval,
        [ValidateSet('Unused', 'First', 'Second', 'Third', 'Fourth', 'Last')]
        [object]$FrequencyRelativeInterval,
        [int]$FrequencyRecurrenceFactor,
        [string]$StartDate,
        [string]$EndDate,
        [string]$StartTime,
        [string]$EndTime,
        [Alias('Silent')]
        [switch]$EnableException,
        [switch]$Force
    )

    begin {

        # Check of the FrequencyType value is of type string and set the integer value
        if ($FrequencyType -notin 0, 1, 4, 8, 16, 32, 64, 128) {
            [int]$FrequencyType = switch ($FrequencyType) { "Once" { 1 } "Daily" { 4 } "Weekly" { 8 } "Monthly" { 16 } "MonthlyRelative" { 32 } "AgentStart" { 64 } "IdleComputer" { 128 } }
        }

        # Check of the FrequencySubdayType value is of type string and set the integer value
        if ($FrequencySubdayType -notin 0, 1, 2, 4, 8) {
            [int]$FrequencySubdayType = switch ($FrequencySubdayType) { "Time" { 1 } "Seconds" { 2 } "Minutes" { 4 } "Hours" { 8 } default {0} }
        }

        # Check if the interval is valid
        if (($FrequencyType -eq 4) -and ($FrequencyInterval -lt 1 -or $FrequencyInterval -ge 365)) {
            Stop-Function -Message "The interval $FrequencyInterval needs to be higher than 1 and lower than 365 when using a daily frequency the interval." -Target $SqlInstance
            return
        }

        # Check if the recurrence factor is set for weekly or monthly interval
        if (($FrequencyType -in 8, 16) -and $FrequencyRecurrenceFactor -lt 1) {
            if ($Force) {
                $FrequencyRecurrenceFactor = 1
                Write-Message -Message "Recurrence factor not set for weekly or monthly interval. Setting it to $FrequencyRecurrenceFactor." -Level Verbose
            } else {
                Stop-Function -Message "The recurrence factor $FrequencyRecurrenceFactor needs to be at least on when using a weekly or monthly interval." -Target $SqlInstance
                return
            }
        }

        # Check the subday interval
        if (($FrequencySubdayType -in 2, 4) -and (-not ($FrequencySubdayInterval -ge 1 -or $FrequencySubdayInterval -le 59))) {
            Stop-Function -Message "Subday interval $FrequencySubdayInterval must be between 1 and 59 when subday type is 2, 'Seconds', 4 or 'Minutes'" -Target $SqlInstance
            return
        } elseif (($FrequencySubdayType -eq 8) -and (-not ($FrequencySubdayInterval -ge 1 -and $FrequencySubdayInterval -le 23))) {
            Stop-Function -Message "Subday interval $FrequencySubdayInterval must be between 1 and 23 when subday type is 8 or 'Hours" -Target $SqlInstance
            return
        }

        # Check of the FrequencyInterval value is of type string and set the integer value
        if (($null -ne $FrequencyType)) {
            # Create the interval to hold the value(s)
            [int]$Interval = 0

            # If the FrequencyInterval is set for the weekly FrequencyType
            if ($FrequencyType -eq 8) {
                # Loop through the array
                foreach ($Item in $FrequencyInterval) {
                    switch ($Item) {
                        "Sunday" { $Interval += 1 }
                        "Monday" { $Interval += 2 }
                        "Tuesday" { $Interval += 4 }
                        "Wednesday" { $Interval += 8 }
                        "Thursday" { $Interval += 16 }
                        "Friday" { $Interval += 32 }
                        "Saturday" { $Interval += 64 }
                        "Weekdays" { $Interval = 62 }
                        "Weekend" { $Interval = 65 }
                        "EveryDay" {$Interval = 127 }
                        1 { $Interval += 1 }
                        2 { $Interval += 2 }
                        4 { $Interval += 4 }
                        8 { $Interval += 8 }
                        16 { $Interval += 16 }
                        31 { $Interval += 32 }
                        64 { $Interval += 64 }
                        62 { $Interval = 62 }
                        65 { $Interval = 65 }
                        127 {$Interval = 127 }
                    }
                }
            }

            # If the FrequencyInterval is set for the relative monthly FrequencyInterval
            if ($FrequencyType -eq 32) {
                # Loop through the array
                foreach ($Item in $FrequencyInterval) {
                    switch ($Item) {
                        "Sunday" { $Interval += 1 }
                        "Monday" { $Interval += 2 }
                        "Tuesday" { $Interval += 3 }
                        "Wednesday" { $Interval += 4 }
                        "Thursday" { $Interval += 5 }
                        "Friday" { $Interval += 6 }
                        "Saturday" { $Interval += 7 }
                        "Day" { $Interval += 8 }
                        "Weekday" { $Interval += 9 }
                        "WeekendDay" { $Interval += 10 }
                        1 { $Interval += 1 }
                        2 { $Interval += 2 }
                        3 { $Interval += 3 }
                        4 { $Interval += 4 }
                        5 { $Interval += 5 }
                        6 { $Interval += 6 }
                        7 { $Interval += 7 }
                        8 { $Interval += 8 }
                        9 { $Interval += 9 }
                        10 { $Interval += 10 }
                    }
                }
            }
        }

        # Check of the relative FrequencyInterval value is of type string and set the integer value
        if (($FrequencyRelativeInterval -notin 1, 2, 4, 8, 16) -and $null -ne $FrequencyRelativeInterval) {
            [int]$FrequencyRelativeInterval = switch ($FrequencyRelativeInterval) { "First" { 1 } "Second" { 2 } "Third" { 4 } "Fourth" { 8 } "Last" { 16 } "Unused" { 0 } default { 0 }}
        }

        # Check if the interval is valid
        if (($FrequencyType -eq 4) -and ($FrequencyInterval -lt 1 -or $FrequencyInterval -ge 365)) {
            Stop-Function -Message "The interval $FrequencyInterval needs to be higher than 1 and lower than 365 when using a daily frequency the interval." -Target $SqlInstance
            return
        }

        # Setup the regex
        $RegexDate = '(?<!\d)(?:(?:(?:1[6-9]|[2-9]\d)?\d{2})(?:(?:(?:0[13578]|1[02])31)|(?:(?:0[1,3-9]|1[0-2])(?:29|30)))|(?:(?:(?:(?:1[6-9]|[2-9]\d)?(?:0[48]|[2468][048]|[13579][26])|(?:(?:16|[2468][048]|[3579][26])00)))0229)|(?:(?:1[6-9]|[2-9]\d)?\d{2})(?:(?:0?[1-9])|(?:1[0-2]))(?:0?[1-9]|1\d|2[0-8]))(?!\d)'
        $RegexTime = '^(?:(?:([01]?\d|2[0-3]))?([0-5]?\d))?([0-5]?\d)$'

        # Check the start date
        if ($StartDate -and ($StartDate -notmatch $RegexDate)) {
            Stop-Function -Message "Start date $StartDate needs to be a valid date with format yyyyMMdd" -Target $SqlInstance
            return
        }

        # Check the end date
        if ($EndDate -and ($EndDate -notmatch $RegexDate)) {
            Stop-Function -Message "End date $EndDate needs to be a valid date with format yyyyMMdd" -Target $SqlInstance
            return
        } elseif ($EndDate -lt $StartDate) {
            Stop-Function -Message "End date $EndDate cannot be before start date $StartDate" -Target $SqlInstance
            return
        }

        # Check the start time
        if ($StartTime -and ($StartTime -notmatch $RegexTime)) {
            Stop-Function -Message "Start time $StartTime needs to match between '000000' and '235959'" -Target $SqlInstance
            return
        }

        # Check the end time
        if ($EndTime -and ($EndTime -notmatch $RegexTime)) {
            Stop-Function -Message "End time $EndTime needs to match between '000000' and '235959'" -Target $SqlInstance
            return
        }

        #Format dates and times
        if ($StartDate) {
            $StartDate = $StartDate.Insert(6, '-').Insert(4, '-')
        }
        if ($EndDate) {
            $EndDate = $EndDate.Insert(6, '-').Insert(4, '-')
        }
        if ($StartTime) {
            $StartTime = $StartTime.Insert(4, ':').Insert(2, ':')
        }
        if ($EndTime) {
            $EndTime = $EndTime.Insert(4, ':').Insert(2, ':')
        }
    }

    process {

        if (Test-FunctionInterrupt) { return }

        foreach ($instance in $sqlinstance) {

            foreach ($j in $Job) {

                # Try connecting to the instance
                try {
                    $Server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
                } catch {
                    Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
                }

                # Check if the job exists
                if ($Server.JobServer.Jobs.Name -notcontains $j) {
                    Write-Message -Message "Job $j doesn't exists on $instance" -Level Warning
                } else {
                    # Check if the job schedule exists
                    if ($Server.JobServer.Jobs[$j].JobSchedules.Name -notcontains $ScheduleName) {
                        Stop-Function -Message "Schedule $ScheduleName doesn't exists for job $j on $instance" -Target $instance -Continue
                    } else {
                        # Get the job schedule
                        # If for some reason the there are multiple schedules with the same name, the first on is chosen
                        $JobSchedule = $Server.JobServer.Jobs[$j].JobSchedules[$ScheduleName][0]

                        #region job step options
                        # Setting the options for the job schedule
                        if ($NewName) {
                            Write-Message -Message "Setting job schedule name to $NewName for schedule $ScheduleName" -Level Verbose
                            $JobSchedule.Rename($NewName)
                        }

                        if ($Enabled) {
                            Write-Message -Message "Setting job schedule to enabled for schedule $ScheduleName" -Level Verbose
                            $JobSchedule.IsEnabled = $true
                        }

                        if ($Disabled) {
                            Write-Message -Message "Setting job schedule to disabled for schedule $ScheduleName" -Level Verbose
                            $JobSchedule.IsEnabled = $false
                        }

                        if ($FrequencyType -ge 1) {
                            Write-Message -Message "Setting job schedule frequency to $FrequencyType for schedule $ScheduleName" -Level Verbose
                            $JobSchedule.FrequencyTypes = $FrequencyType
                        }

                        if ($Interval -ge 1) {
                            Write-Message -Message "Setting job schedule frequency interval to $Interval for schedule $ScheduleName" -Level Verbose
                            $JobSchedule.FrequencyInterval = $Interval
                        }

                        if ($FrequencySubdayType -ge 1) {
                            Write-Message -Message "Setting job schedule frequency subday type to $FrequencySubdayType for schedule $ScheduleName" -Level Verbose
                            $JobSchedule.FrequencySubDayTypes = $FrequencySubdayType
                        }

                        if ($FrequencySubdayInterval -ge 1) {
                            Write-Message -Message "Setting job schedule frequency subday interval to $FrequencySubdayInterval for schedule $ScheduleName" -Level Verbose
                            $JobSchedule.FrequencySubDayInterval = $FrequencySubdayInterval
                        }

                        if (($FrequencyRelativeInterval -ge 1) -and ($FrequencyType -eq 32)) {
                            Write-Message -Message "Setting job schedule frequency relative interval to $FrequencyRelativeInterval for schedule $ScheduleName" -Level Verbose
                            $JobSchedule.FrequencyRelativeIntervals = $FrequencyRelativeInterval
                        }

                        if (($FrequencyRecurrenceFactor -ge 1) -and ($FrequencyType -in 8, 16, 32)) {
                            Write-Message -Message "Setting job schedule frequency recurrence factor to $FrequencyRecurrenceFactor for schedule $ScheduleName" -Level Verbose
                            $JobSchedule.FrequencyRecurrenceFactor = $FrequencyRecurrenceFactor
                        }

                        if ($StartDate) {
                            Write-Message -Message "Setting job schedule start date to $StartDate for schedule $ScheduleName" -Level Verbose
                            $JobSchedule.StartDate = $StartDate
                        }

                        if ($EndDate) {
                            Write-Message -Message "Setting job schedule end date to $EndDate for schedule $ScheduleName" -Level Verbose
                            $JobSchedule.EndDate = $EndDate
                        }

                        if ($StartTime) {
                            Write-Message -Message "Setting job schedule start time to $StartTime for schedule $ScheduleName" -Level Verbose
                            $JobSchedule.ActiveStartTimeOfDay = $StartTime
                        }

                        if ($EndTime) {
                            Write-Message -Message "Setting job schedule end time to $EndTime for schedule $ScheduleName" -Level Verbose
                            $JobSchedule.ActiveStartTimeOfDay = $EndTime
                        }
                        #endregion job step options

                        # Execute the query
                        if ($PSCmdlet.ShouldProcess($instance, "Changing the schedule $ScheduleName for job $j on $instance")) {
                            try {
                                # Excute the query and save the result
                                Write-Message -Message "Changing the schedule $ScheduleName for job $j" -Level Verbose

                                $JobSchedule.Alter()

                            } catch {
                                Stop-Function -Message "Something went wrong changing the schedule" -Target $instance -ErrorRecord $_ -Continue
                                return
                            }
                        }
                    }
                }
            } # foreach object job
        } # foreach object instance
    } # process

    end {
        if (Test-FunctionInterrupt) { return }
        Write-Message -Message "Finished changing the job schedule(s)" -Level Verbose
    }
}

tools\dbatools\internal\configurations\settings\userinteraction.ps1

<#
This configuration file is for all settings of how dbatools interacts with users
#>

# Configure the message levels at which the function will write either an info, a verbose message or debug message
# Used by the internal "Write-Message" function
Set-DbatoolsConfig -Name 'message.maximuminfo' -Value 3 -Initialize -Validation integer0to9 -Handler { [Sqlcollaborative.Dbatools.Message.MessageHost]::MaximumInformation = $args[0] } -Description "The maximum message level to still display to the user directly."
Set-DbatoolsConfig -Name 'message.maximumverbose' -Value 6 -Initialize -Validation integer0to9 -Handler { [Sqlcollaborative.Dbatools.Message.MessageHost]::MaximumVerbose = $args[0] } -Description "The maxium message level where verbose information is still written."
Set-DbatoolsConfig -Name 'message.maximumdebug' -Value 9 -Initialize -Validation integer0to9 -Handler { [Sqlcollaborative.Dbatools.Message.MessageHost]::MaximumDebug = $args[0] } -Description "The maximum message level where debug information is still written."
Set-DbatoolsConfig -Name 'message.minimuminfo' -Value 1 -Initialize -Validation integer0to9 -Handler { [Sqlcollaborative.Dbatools.Message.MessageHost]::MinimumInformation = $args[0] } -Description "The minimum required message level for messages that will be shown to the user."
Set-DbatoolsConfig -Name 'message.minimumverbose' -Value 4 -Initialize -Validation integer0to9 -Handler { [Sqlcollaborative.Dbatools.Message.MessageHost]::MinimumVerbose = $args[0] } -Description "The minimum required message level where verbose information is written."
Set-DbatoolsConfig -Name 'message.minimumdebug' -Value 1 -Initialize -Validation integer0to9 -Handler { [Sqlcollaborative.Dbatools.Message.MessageHost]::MinimumDebug = $args[0] } -Description "The minimum required message level where debug information is written."

# Default color used by the "Write-Message" function in info mode
Set-DbatoolsConfig -Name 'message.infocolor' -Value 'Cyan' -Initialize -Validation consolecolor -Handler { [Sqlcollaborative.Dbatools.Message.MessageHost]::InfoColor = $args[0] } -Description "The color to use when writing text to the screen on PowerShell."
Set-DbatoolsConfig -Name 'message.developercolor' -Value 'Grey' -Initialize -Validation consolecolor -Handler { [Sqlcollaborative.Dbatools.Message.MessageHost]::DeveloperColor = $args[0] } -Description "The color to use when writing text with developer specific additional information to the screen on PowerShell."
Set-DbatoolsConfig -Name 'message.info.color.emphasis' -Value 'green' -Initialize -Validation "consolecolor" -Handler { [Sqlcollaborative.Dbatools.Message.MessageHost]::InfoColorEmphasis = $args[0] } -Description "The color to use when emphasizing written text to the screen on PowerShell."
Set-DbatoolsConfig -Name 'message.info.color.subtle' -Value 'gray' -Initialize -Validation "consolecolor" -Handler { [Sqlcollaborative.Dbatools.Message.MessageHost]::InfoColorSubtle = $args[0] } -Description "The color to use when making writing text to the screen on PowerShell appear subtle."
Set-DbatoolsConfig -Name 'message.consoleoutput.disable' -Value $false -Initialize -Validation "bool" -Handler { [Sqlcollaborative.Dbatools.Message.MessageHost]::DisableVerbosity = $args[0] } -Description "Global toggle that allows disabling all regular messages to screen. Messages from '-Verbose' and '-Debug' are unaffected"
Set-DbatoolsConfig -Name 'message.transform.errorqueuesize' -Value 512 -Initialize -Validation "integerpositive" -Handler { [Sqlcollaborative.Dbatools.Message.MessageHost]::TransformErrorQueueSize = $args[0] } -Description "The size of the queue for transformation errors. May be useful for advanced development, but can be ignored usually."
Set-DbatoolsConfig -Name 'message.nestedlevel.decrement' -Value 0 -Initialize -Validation "integer0to9" -Handler { [Sqlcollaborative.Dbatools.Message.MessageHost]::NestedLevelDecrement = $args[0] } -Description "How many levels should be reduced per callstack depth. This makes commands less verbose, the more nested they are called"

# Messaging mode in non-critical terminations
Set-DbatoolsConfig -Name 'message.mode.default' -Value ([DbaMode]::Strict) -Initialize -Validation string -Handler { } -Description "The mode controls how some functions handle non-critical terminations by default. Strict: Write a warning | Lazy: Write a message | Report: Generate a report object"
Set-DbatoolsConfig -Name 'message.mode.lazymessagelevel' -Value 4 -Initialize -Validation integer0to9 -Handler { } -Description "At what level will the lazy message be written? (By default invisible to the user)"

# Enable Developer mode
Set-DbatoolsConfig -Name 'developer.mode.enable' -Value $false -Initialize -Validation bool -Handler { [Sqlcollaborative.Dbatools.Message.MessageHost]::DeveloperMode = $args[0] } -Description "Developermode enables advanced logging and verbosity features. There is little benefit for enabling this as a regular user. but developers can use it to more easily troubleshoot issues."

# Message display style options
Set-DbatoolsConfig -Name 'message.style.breadcrumbs' -Value $false -Initialize -Validation "bool" -Handler { [Sqlcollaborative.Dbatools.Message.MessageHost]::EnableMessageBreadcrumbs = $args[0] } -Description "Controls how messages are displayed. Enables Breadcrumb display, showing the entire callstack. Takes precedence over command name display."
Set-DbatoolsConfig -Name 'message.style.functionname' -Value $true -Initialize -Validation "bool" -Handler { [Sqlcollaborative.Dbatools.Message.MessageHost]::EnableMessageDisplayCommand = $args[0] } -Description "Controls how messages are displayed. Enables command name, showing the name of the writing command. Is overwritten by enabling breadcrumbs."
Set-DbatoolsConfig -Name 'message.style.timestamp' -Value $true -Initialize -Validation "bool" -Handler { [Sqlcollaborative.Dbatools.Message.MessageHost]::EnableMessageTimestamp = $args[0] } -Description "Controls how messages are displayed. Enables timestamp display, including a timestamp in each message."

tools\dbatools\internal\configurations\validation\bool.ps1

Register-DbatoolsConfigValidation -Name "bool" -ScriptBlock {
    param (
        $Value
    )

    $Result = New-Object PSObject -Property @{
        Success = $True
        Value   = $null
        Message = ""
    }
    try {
        if ($Value.GetType().FullName -ne "System.Boolean") {
            $Result.Message = "Not a boolean: $Value"
            $Result.Success = $False
            return $Result
        }
    } catch {
        $Result.Message = "Not a boolean: $Value"
        $Result.Success = $False
        return $Result
    }

    $Result.Value = $Value

    return $Result
}

tools\dbatools\functions\Set-DbaAgentJobStep.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Set-DbaAgentJobStep {
    <#
    .SYNOPSIS
        Set-DbaAgentJobStep updates a job step.

    .DESCRIPTION
        Set-DbaAgentJobStep updates a job step in the SQL Server Agent with parameters supplied.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2000 or greater.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Job
        The name of the job. Can be null if the the job id is being used.

    .PARAMETER StepName
        The name of the step.

    .PARAMETER NewName
        The new name for the step in case it needs to be renamed.

    .PARAMETER SubSystem
        The subsystem used by the SQL Server Agent service to execute command.
        Allowed values 'ActiveScripting','AnalysisCommand','AnalysisQuery','CmdExec','Distribution','LogReader','Merge','PowerShell','QueueReader','Snapshot','Ssis','TransactSql'

    .PARAMETER Command
        The commands to be executed by SQLServerAgent service through subsystem.

    .PARAMETER CmdExecSuccessCode
        The value returned by a CmdExec subsystem command to indicate that command executed successfully.

    .PARAMETER OnSuccessAction
        The action to perform if the step succeeds.
        Allowed values  "QuitWithSuccess" (default), "QuitWithFailure", "GoToNextStep", "GoToStep".
        The text value van either be lowercase, uppercase or something in between as long as the text is correct.

    .PARAMETER OnSuccessStepId
        The ID of the step in this job to execute if the step succeeds and OnSuccessAction is "GoToNextStep".

    .PARAMETER OnFailAction
        The action to perform if the step fails.
        Allowed values  "QuitWithSuccess" (default), "QuitWithFailure", "GoToNextStep", "GoToStep".
        The text value van either be lowercase, uppercase or something in between as long as the text is correct.

    .PARAMETER OnFailStepId
        The ID of the step in this job to execute if the step fails and OnFailAction is "GoToNextStep".

    .PARAMETER Database
        The name of the database in which to execute a Transact-SQL step. The default is 'master'.

    .PARAMETER DatabaseUser
        The name of the user account to use when executing a Transact-SQL step. The default is 'sa'.

    .PARAMETER RetryAttempts
        The number of retry attempts to use if this step fails. The default is 0.

    .PARAMETER RetryInterval
        The amount of time in minutes between retry attempts. The default is 0.

    .PARAMETER OutputFileName
        The name of the file in which the output of this step is saved.

    .PARAMETER Flag
        Sets the flag(s) for the job step.

        Flag                                    Description
        ----------------------------------------------------------------------------
        AppendAllCmdExecOutputToJobHistory      Job history, including command output, is appended to the job history file.
        AppendToJobHistory                      Job history is appended to the job history file.
        AppendToLogFile                         Job history is appended to the SQL Server log file.
        AppendToTableLog                        Job history is appended to a log table.
        LogToTableWithOverwrite                 Job history is written to a log table, overwriting previous contents.
        None                                    Job history is not appended to a file.
        ProvideStopProcessEvent                 Job processing is stopped.

    .PARAMETER ProxyName
        The name of the proxy that the job step runs as.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER Force
        The force parameter will ignore some errors in the parameters and assume defaults.

    .NOTES
        Tags: Agent, Job, JobStep
        Author: Sander Stad (@sqlstad), sqlstad.nl

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Set-DbaAgentJobStep

    .EXAMPLE
        PS C:\> Set-DbaAgentJobStep -SqlInstance sql1 -Job Job1 -StepName Step1 -NewName Step2

        Changes the name of the step in "Job1" with the name Step1 to Step2

    .EXAMPLE
        PS C:\> Set-DbaAgentJobStep -SqlInstance sql1 -Job Job1 -StepName Step1 -Database msdb

        Changes the database of the step in "Job1" with the name Step1 to msdb

    .EXAMPLE
        PS C:\> Set-DbaAgentJobStep -SqlInstance sql1 -Job Job1, Job2 -StepName Step1 -Database msdb

        Changes job steps in multiple jobs with the name Step1 to msdb

    .EXAMPLE
        PS C:\> Set-DbaAgentJobStep -SqlInstance sql1, sql2, sql3 -Job Job1, Job2 -StepName Step1 -Database msdb

        Changes job steps in multiple jobs on multiple servers with the name Step1 to msdb

    .EXAMPLE
        PS C:\> Set-DbaAgentJobStep -SqlInstance sql1, sql2, sql3 -Job Job1 -StepName Step1 -Database msdb

        Changes the database of the step in "Job1" with the name Step1 to msdb for multiple servers

    .EXAMPLE
        PS C:\> sql1, sql2, sql3 | Set-DbaAgentJobStep -Job Job1 -StepName Step1 -Database msdb

        Changes the database of the step in "Job1" with the name Step1 to msdb for multiple servers using pipeline

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "Low")]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [object[]]$Job,
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [string]$StepName,
        [string]$NewName,
        [ValidateSet('ActiveScripting', 'AnalysisCommand', 'AnalysisQuery', 'CmdExec', 'Distribution', 'LogReader', 'Merge', 'PowerShell', 'QueueReader', 'Snapshot', 'Ssis', 'TransactSql')]
        [string]$Subsystem,
        [string]$Command,
        [int]$CmdExecSuccessCode,
        [ValidateSet('QuitWithSuccess', 'QuitWithFailure', 'GoToNextStep', 'GoToStep')]
        [string]$OnSuccessAction,
        [int]$OnSuccessStepId,
        [ValidateSet('QuitWithSuccess', 'QuitWithFailure', 'GoToNextStep', 'GoToStep')]
        [string]$OnFailAction,
        [int]$OnFailStepId,
        [string]$Database,
        [string]$DatabaseUser,
        [int]$RetryAttempts,
        [int]$RetryInterval,
        [string]$OutputFileName,
        [ValidateSet('AppendAllCmdExecOutputToJobHistory', 'AppendToJobHistory', 'AppendToLogFile', 'LogToTableWithOverwrite', 'None', 'ProvideStopProcessEvent')]
        [string[]]$Flag,
        [string]$ProxyName,
        [Alias('Silent')]
        [switch]$EnableException,
        [switch]$Force
    )

    begin {
        # Check the parameter on success step id
        if (($OnSuccessAction -ne 'GoToStep') -and ($OnSuccessStepId -ge 1)) {
            Stop-Function -Message "Parameter OnSuccessStepId can only be used with OnSuccessAction 'GoToStep'." -Target $SqlInstance
            return
        }

        # Check the parameter on success step id
        if (($OnFailAction -ne 'GoToStep') -and ($OnFailStepId -ge 1)) {
            Stop-Function -Message "Parameter OnFailStepId can only be used with OnFailAction 'GoToStep'." -Target $SqlInstance
            return
        }
    }

    process {

        if (Test-FunctionInterrupt) { return }

        foreach ($instance in $sqlinstance) {

            # Try connecting to the instance
            try {
                $Server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            foreach ($j in $Job) {

                # Check if the job exists
                if ($Server.JobServer.Jobs.Name -notcontains $j) {
                    Stop-Function -Message "Job $j doesn't exists on $instance" -Target $instance -Continue
                } else {
                    # Check if the job step exists
                    if ($Server.JobServer.Jobs[$j].JobSteps.Name -notcontains $StepName) {
                        Stop-Function -Message "Step $StepName doesn't exists for job $j" -Target $instance -Continue
                    } else {

                        # Get the job step
                        $JobStep = $Server.JobServer.Jobs[$j].JobSteps[$StepName]

                        Write-Message -Message "Modifying job $j on $instance" -Level Verbose

                        #region job step options
                        # Setting the options for the job step
                        if ($NewName) {
                            Write-Message -Message "Setting job step name to $NewName" -Level Verbose
                            $JobStep.Rename($NewName)
                        }

                        if ($Subsystem) {
                            Write-Message -Message "Setting job step subsystem to $Subsystem" -Level Verbose
                            $JobStep.Subsystem = $Subsystem
                        }

                        if ($Command) {
                            Write-Message -Message "Setting job step command to $Command" -Level Verbose
                            $JobStep.Command = $Command
                        }

                        if ($CmdExecSuccessCode) {
                            Write-Message -Message "Setting job step command exec success code to $CmdExecSuccessCode" -Level Verbose
                            $JobStep.CommandExecutionSuccessCode = $CmdExecSuccessCode
                        }

                        if ($OnSuccessAction) {
                            Write-Message -Message "Setting job step success action to $OnSuccessAction" -Level Verbose
                            $JobStep.OnSuccessAction = $OnSuccessAction
                        }

                        if ($OnSuccessStepId) {
                            Write-Message -Message "Setting job step success step id to $OnSuccessStepId" -Level Verbose
                            $JobStep.OnSuccessStep = $OnSuccessStepId
                        }

                        if ($OnFailAction) {
                            Write-Message -Message "Setting job step fail action to $OnFailAction" -Level Verbose
                            $JobStep.OnFailAction = $OnFailAction
                        }

                        if ($OnFailStepId) {
                            Write-Message -Message "Setting job step fail step id to $OnFailStepId" -Level Verbose
                            $JobStep.OnFailStep = $OnFailStepId
                        }

                        if ($Database) {
                            # Check if the database is present on the server
                            if ($Server.Databases.Name -contains $Database) {
                                Write-Message -Message "Setting job step database name to $Database" -Level Verbose
                                $JobStep.DatabaseName = $Database
                            } else {
                                Stop-Function -Message "The database is not present on instance $instance." -Target $instance -Continue
                            }
                        }

                        if (($DatabaseUser) -and ($Database)) {
                            # Check if the username is present in the database
                            if ($Server.Databases[$Database].Users.Name -contains $DatabaseUser) {
                                Write-Message -Message "Setting job step database username to $DatabaseUser" -Level Verbose
                                $JobStep.DatabaseUserName = $DatabaseUser
                            } else {
                                Stop-Function -Message "The database user is not present in the database $Database on instance $instance." -Target $instance -Continue
                            }
                        }

                        if ($RetryAttempts) {
                            Write-Message -Message "Setting job step retry attempts to $RetryAttempts" -Level Verbose
                            $JobStep.RetryAttempts = $RetryAttempts
                        }

                        if ($RetryInterval) {
                            Write-Message -Message "Setting job step retry interval to $RetryInterval" -Level Verbose
                            $JobStep.RetryInterval = $RetryInterval
                        }

                        if ($OutputFileName) {
                            Write-Message -Message "Setting job step output file name to $OutputFileName" -Level Verbose
                            $JobStep.OutputFileName = $OutputFileName
                        }

                        if ($ProxyName) {
                            # Check if the proxy exists
                            if ($Server.JobServer.ProxyAccounts.Name -contains $ProxyName) {
                                Write-Message -Message "Setting job step proxy name to $ProxyName" -Level Verbose
                                $JobStep.ProxyName = $ProxyName
                            } else {
                                Stop-Function -Message "The proxy name $ProxyName doesn't exist on instance $instance." -Target $instance -Continue
                            }
                        }

                        if ($Flag.Count -ge 1) {
                            Write-Message -Message "Setting job step flag(s) to $($Flags -join ',')" -Level Verbose
                            $JobStep.JobStepFlags = $Flag
                        }
                        #region job step options

                        # Execute
                        if ($PSCmdlet.ShouldProcess($instance, "Changing the job step $StepName for job $j")) {
                            try {
                                Write-Message -Message "Changing the job step $StepName for job $j" -Level Verbose

                                # Change the job step
                                $JobStep.Alter()
                            } catch {
                                Stop-Function -Message "Something went wrong changing the job step" -ErrorRecord $_ -Target $instance -Continue
                            }
                        }
                    }
                }

            } # foreach object job
        } # foreach object intance
    } # process

    end {
        if (Test-FunctionInterrupt) { return }
        Write-Message -Message "Finished changing job step(s)" -Level Verbose
    }
}

tools\dbatools\internal\configurations\validation\datetime.ps1

Register-DbatoolsConfigValidation -Name "datetime" -ScriptBlock {
    param (
        $Value
    )

    $Result = New-Object PSObject -Property @{
        Success = $True
        Value   = $null
        Message = ""
    }

    try { [DateTime]$DateTime = $Value }
    catch {
        $Result.Message = "Not a DateTime: $Value"
        $Result.Success = $False
        return $Result
    }

    $Result.Value = $DateTime

    return $Result
}

tools\dbatools\internal\configurations\validation\double.ps1

Register-DbatoolsConfigValidation -Name "double" -ScriptBlock {
    param (
        $Value
    )

    $Result = New-Object PSOBject -Property @{
        Success = $True
        Value   = $null
        Message = ""
    }

    try { [double]$number = $Value }
    catch {
        $Result.Message = "Not a double: $Value"
        $Result.Success = $False
        return $Result
    }

    $Result.Value = $number

    return $Result
}

tools\dbatools\internal\configurations\validation\integer.ps1

Register-DbatoolsConfigValidation -Name "integer" -ScriptBlock {
    param (
        $Value
    )

    $Result = New-Object PSOBject -Property @{
        Success = $True
        Value   = $null
        Message = ""
    }

    try { [int]$number = $Value }
    catch {
        $Result.Message = "Not an integer: $Value"
        $Result.Success = $False
        return $Result
    }

    $Result.Value = $number

    return $Result
}

tools\dbatools\internal\configurations\validation\integer0to9.ps1

Register-DbatoolsConfigValidation -Name "integer0to9" -ScriptBlock {
    param (
        $Value
    )

    $Result = New-Object PSOBject -Property @{
        Success = $True
        Value   = $null
        Message = ""
    }

    try { [int]$number = $Value }
    catch {
        $Result.Message = "Not an integer: $Value"
        $Result.Success = $False
        return $Result
    }

    if (($number -lt 0) -or ($number -gt 9)) {
        $Result.Message = "Out of range. Specify a number ranging from 0 to 9"
        $Result.Success = $False
        return $Result
    }

    $Result.Value = $Number

    return $Result
}

tools\dbatools\internal\configurations\validation\integerpositive.ps1

Register-DbatoolsConfigValidation -Name "integerpositive" -ScriptBlock {
    param (
        $Value
    )

    $Result = New-Object PSOBject -Property @{
        Success = $True
        Value   = $null
        Message = ""
    }

    try { [int]$number = $Value }
    catch {
        $Result.Message = "Not an integer: $Value"
        $Result.Success = $False
        return $Result
    }

    if ($number -lt 0) {
        $Result.Message = "Negative value: $Value"
        $Result.Success = $False
        return $Result
    }

    $Result.Value = $number

    return $Result
}

tools\dbatools\functions\Set-DbaAgentJobOwner.ps1

function Set-DbaAgentJobOwner {
    <#
    .SYNOPSIS
        Sets SQL Agent job owners with a desired login if jobs do not match that owner.

    .DESCRIPTION
        This function alters SQL Agent Job ownership to match a specified login if their current owner does not match the target login. By default, the target login will be 'sa',
        but the the user may specify a different login for ownership. This be applied to all jobs or only to a select collection of jobs.

        Best practice reference: http://sqlmag.com/blog/sql-server-tip-assign-ownership-jobs-sysadmin-account

        If the 'sa' account was renamed, the new name will be used.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Job
        Specifies the job(s) to process. Options for this list are auto-populated from the server. If unspecified, all jobs will be processed.

    .PARAMETER ExcludeJob
        Specifies the job(s) to exclude from processing. Options for this list are auto-populated from the server.

    .PARAMETER InputObject
        Enables piped input from Get-DbaAgentJob

    .PARAMETER Login
        Specifies the login that you wish check for ownership. This defaults to 'sa' or the sysadmin name if sa was renamed. This must be a valid security principal which exists on the target server.

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Agent, Job
        Author: Michael Fal (@Mike_Fal), http://mikefal.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Set-DbaAgentJobOwner

    .EXAMPLE
        PS C:\> Set-DbaAgentJobOwner -SqlInstance localhost

        Sets SQL Agent Job owner to sa on all jobs where the owner does not match sa.

    .EXAMPLE
        PS C:\> Set-DbaAgentJobOwner -SqlInstance localhost -Login DOMAIN\account

        Sets SQL Agent Job owner to 'DOMAIN\account' on all jobs where the owner does not match 'DOMAIN\account'. Note
        that Login must be a valid security principal that exists on the target server.

    .EXAMPLE
        PS C:\> Set-DbaAgentJobOwner -SqlInstance localhost -Job job1, job2

        Sets SQL Agent Job owner to 'sa' on the job1 and job2 jobs if their current owner does not match 'sa'.

    .EXAMPLE
        PS C:\> 'sqlserver','sql2016' | Set-DbaAgentJobOwner

        Sets SQL Agent Job owner to sa on all jobs where the owner does not match sa on both sqlserver and sql2016.

    .EXAMPLE
        PS C:\> Get-DbaAgentJob -SqlInstance vmsql | Where-Object OwnerLoginName -eq login1 | Set-DbaAgentJobOwner -TargetLogin login2 | Out-Gridview

        Sets SQL Agent Job owner to login2 where their current owner is login1 on instance vmsql. Send result to gridview.
    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [parameter(ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias("Jobs")]
        [object[]]$Job,
        [object[]]$ExcludeJob,
        [Parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Agent.Job[]]$InputObject,
        [Alias("TargetLogin")]
        [string]$Login,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {
        Test-DbaDeprecation -DeprecatedOn "1.0.0" -Alias Set-DbaJobOwner
    }
    process {
        foreach ($instance in $SqlInstance) {
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            #Get job list. If value for -Job is passed, massage to make it a string array.
            #Otherwise, use all jobs on the instance where owner not equal to -TargetLogin
            Write-Message -Level Verbose -Message "Gathering jobs to update."

            if ($Job) {
                $jobcollection = $server.JobServer.Jobs | Where-Object {$Job -contains $_.Name}
            } else {
                $jobcollection = $server.JobServer.Jobs
            }

            if ($ExcludeJob) {
                $jobcollection = $jobcollection | Where-Object { $ExcludeJob -notcontains $_.Name }
            }

            $InputObject += $jobcollection
        }

        Write-Message -Level Verbose -Message "Updating $($InputObject.Count) job(s)."
        foreach ($agentJob in $InputObject) {
            $jobname = $agentJob.Name
            $server = $agentJob.Parent.Parent

            if (-not $Login) {
                # dynamic sa name for orgs who have changed their sa name
                $newLogin = ($server.logins | Where-Object { $_.id -eq 1 }).Name
            } else {
                $newLogin = $Login
            }

            #Validate login
            if ($agentJob.OwnerLoginName -eq $newLogin) {
                $status = 'Skipped'
                $notes = "Owner already set"
            } else {
                if (($server.Logins.Name) -notcontains $newLogin) {
                    $status = 'Failed'
                    $notes = "Login $newLogin not valid"
                } else {
                    if ($server.logins[$newLogin].LoginType -eq 'WindowsGroup') {
                        $status = 'Failed'
                        $notes = "$newLogin is a Windows Group and can not be a job owner."
                    } else {
                        if ($PSCmdlet.ShouldProcess($instance, "Setting job owner for $jobname to $newLogin")) {
                            try {
                                Write-Message -Level Verbose -Message "Setting job owner for $jobname to $newLogin on $instance."
                                #Set job owner to $TargetLogin (default 'sa')
                                $agentJob.OwnerLoginName = $newLogin
                                $agentJob.Alter()
                                $status = 'Succesful'
                                $notes = ''
                            } catch {
                                Stop-Function -Message "Issue setting job owner on $jobName." -Target $jobName -InnerErrorRecord $_ -Category InvalidOperation
                            }
                        }
                    }
                }
            }
            Add-Member -Force -InputObject $agentJob -MemberType NoteProperty -Name ComputerName -value $server.ComputerName
            Add-Member -Force -InputObject $agentJob -MemberType NoteProperty -Name InstanceName -value $server.ServiceName
            Add-Member -Force -InputObject $agentJob -MemberType NoteProperty -Name SqlInstance -value $server.DomainInstanceName
            Add-Member -Force -InputObject $agentJob -MemberType NoteProperty -Name Status -value $status
            Add-Member -Force -InputObject $agentJob -MemberType NoteProperty -Name Notes -value $notes
            Select-DefaultView -InputObject $agentJob -Property ComputerName, InstanceName, SqlInstance, Name, Category, OwnerLoginName, Status, Notes
        }
    }
}

tools\dbatools\functions\Set-DbaAgentJobOutputFile.ps1

function Set-DbaAgentJobOutputFile {
    <#
    .Synopsis
        Set the output file for a step within an Agent job.

    .DESCRIPTION
        Sets the Output File for a step of an agent job with the Job Names and steps provided dynamically if required

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SQLCredential
        Credential object used to connect to the SQL Server as a different user be it Windows or SQL Server. Windows users are determined by the existence of a backslash, so if you are intending to use an alternative Windows connection instead of a SQL login, ensure it contains a backslash.

    .PARAMETER Job
        The job to process - this list is auto-populated from the server.

    .PARAMETER Step
        The Agent Job Step to provide Output File Path for. Also available dynamically

    .PARAMETER OutputFile
        The Full Path to the New Output file

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Agent, Job, SqlAgent
        Author: Rob Sewell, https://sqldbawithabeard.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Set-DbaAgentJobOutputFile -SqlInstance SERVERNAME -Job 'The Agent Job' -OutPutFile E:\Logs\AgentJobStepOutput.txt

        Sets the Job step for The Agent job on SERVERNAME to E:\Logs\AgentJobStepOutput.txt

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [Parameter(Mandatory, HelpMessage = 'The SQL Server Instance',
            ValueFromPipeline,
            ValueFromPipelineByPropertyName = $true,
            ValueFromRemainingArguments = $false,
            Position = 0)]
        [ValidateNotNull()]
        [ValidateNotNullOrEmpty()]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [Parameter(HelpMessage = 'SQL Credential',
            ValueFromPipeline,
            ValueFromPipelineByPropertyName = $true,
            ValueFromRemainingArguments = $false)]
        [PSCredential]$SqlCredential,
        [object[]]$Job,
        [Parameter(HelpMessage = 'The Job Step name',
            ValueFromPipeline,
            ValueFromPipelineByPropertyName = $true)]
        [ValidateNotNull()]
        [ValidateNotNullOrEmpty()]
        [object[]]$Step,
        [Parameter(Mandatory, HelpMessage = 'The Full Output File Path',
            ValueFromPipeline,
            ValueFromPipelineByPropertyName = $true,
            ValueFromRemainingArguments = $false)]
        [ValidateNotNull()]
        [ValidateNotNullOrEmpty()]
        [string]$OutputFile,
        [Alias('Silent')]
        [switch]$EnableException
    )

    foreach ($instance in $sqlinstance) {
        try {
            $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
        } catch {
            Write-Message -Level Warning -Message "Failed to connect to: $instance"
            continue
        }

        if (!$Job) {
            # This is because jobname isn't yet required
            Write-Message -Level Warning -Message "You must specify a job using the -Job parameter."
            return
        }

        foreach ($name in $Job) {
            $currentJob = $server.JobServer.Jobs[$name]

            if ($Step) {
                $steps = $currentJob.JobSteps | Where-Object Name -in $Step

                if (!$steps) {
                    Write-Message -Level Warning -Message "$Step didn't return any steps"
                    return
                }
            } else {
                if (($currentJob.JobSteps).Count -gt 1) {
                    Write-Message -Level Output -Message "Which Job Step do you wish to add output file to?"
                    $steps = $currentJob.JobSteps | Out-GridView -Title "Choose the Job Steps to add an output file to" -PassThru -Verbose
                } else {
                    $steps = $currentJob.JobSteps
                }
            }

            if (!$steps) {
                $steps = $currentJob.JobSteps
            }

            foreach ($jobstep in $steps) {
                $currentoutputfile = $jobstep.OutputFileName

                Write-Message -Level Verbose -Message "Current Output File for $currentJob is $currentoutputfile"
                Write-Message -Level Verbose -Message "Adding $OutputFile to $jobstep for $currentJob"

                try {
                    if ($Pscmdlet.ShouldProcess($jobstep, "Changing Output File from $currentoutputfile to $OutputFile")) {
                        $jobstep.OutputFileName = $OutputFile
                        $jobstep.Alter()
                        $jobstep.Refresh()

                        [pscustomobject]@{
                            ComputerName   = $server.ComputerName
                            InstanceName   = $server.ServiceName
                            SqlInstance    = $server.DomainInstanceName
                            Job            = $currentJob.Name
                            JobStep        = $jobstep.Name
                            OutputFileName = $currentoutputfile
                        }
                    }
                } catch {
                    Stop-Function -Message "Failed to add $OutputFile to $jobstep for $currentJob" -InnerErrorRecord $_ -Target $currentJob
                }
            }
        }
    }
}

tools\dbatools\internal\configurations\validation\string.ps1

Register-DbatoolsConfigValidation -Name "string" -ScriptBlock {
    param (
        $Value
    )

    $Result = New-Object PSObject -Property @{
        Success = $True
        Value   = $null
        Message = ""
    }

    try {
        # Seriously, this should work for almost anybody and anything
        [string]$data = $Value
    } catch {
        $Result.Message = "Not a string: $Value"
        $Result.Success = $False
        return $Result
    }

    if ([string]::IsNullOrEmpty($data)) {
        $Result.Message = "Is an empty string: $Value"
        $Result.Success = $False
        return $Result
    }

    if ($data -eq $Value.GetType().FullName) {
        $Result.Message = "Is an object with no proper string representation: $Value"
        $Result.Success = $False
        return $Result
    }

    $Result.Value = $data

    return $Result
}

tools\dbatools\internal\configurations\validation\timespan.ps1

Register-DbatoolsConfigValidation -Name "timespan" -ScriptBlock {
    param (
        $Value
    )

    $Result = New-Object PSObject -Property @{
        Success = $True
        Value   = $null
        Message = ""
    }

    try { [timespan]$timespan = $Value }
    catch {
        $Result.Message = "Not a Timespan: $Value"
        $Result.Success = $False
        return $Result
    }

    $Result.Value = $timespan

    return $Result
}

tools\dbatools\functions\Set-DbaAgentJobCategory.ps1

function Set-DbaAgentJobCategory {
    <#
    .SYNOPSIS
        Set-DbaAgentJobCategory changes a job category.

    .DESCRIPTION
        Set-DbaAgentJobCategory makes it possible to change a job category.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2000 or greater.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Category
        The name of the category

    .PARAMETER NewName
        New name of the job category

    .PARAMETER Force
        The force parameter will ignore some errors in the parameters and assume defaults.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Agent, Job, JobCategory
        Author: Sander Stad (@sqlstad), sqlstad.nl

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Set-DbaAgentJobCategory

    .EXAMPLE
        PS C:\> New-DbaAgentJobCategory -SqlInstance sql1 -Category 'Category 1' -NewName 'Category 2'

        Change the name of the category from 'Category 1' to 'Category 2'.

    .EXAMPLE
        PS C:\> Set-DbaAgentJobCategory -SqlInstance sql1, sql2 -Category Category1, Category2 -NewName cat1, cat2

        Rename multiple jobs in one go on multiple servers.

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "Low")]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseOutputTypeCorrectly", "", Justification = "PSSA Rule Ignored by BOH")]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [ValidateNotNullOrEmpty()]
        [string[]]$Category,
        [string[]]$NewName,
        [switch]$Force,
        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        # Create array list to hold the results
        $collection = New-Object System.Collections.ArrayList

        # Check if multiple categories are being changed
        if ($Category.Count -gt 1 -and $NewName.Count -eq 1) {
            Stop-Function -Message "You cannot rename multiple jobs to the same name" -Target $instance
        }
    }

    process {

        foreach ($instance in $sqlinstance) {
            # Try connecting to the instance
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            # Loop through each of the categories
            foreach ($cat in $Category) {
                # Check if the category exists
                if ($cat -notin $server.JobServer.JobCategories.Name) {
                    Stop-Function -Message "Job category $cat doesn't exist on $instance" -Target $instance -Continue
                }

                # Check if the category already exists
                if ($NewName -and ($NewName -in $server.JobServer.JobCategories.Name)) {
                    Stop-Function -Message "Job category $NewName already exists on $instance" -Target $instance -Continue
                }

                if ($PSCmdlet.ShouldProcess($instance, "Changing the job category $Category")) {
                    try {
                        # Get the job category object
                        $currentCategory = $server.JobServer.JobCategories[$cat]

                        Write-Message -Message "Changing job category $cat" -Level Verbose

                        # Get and set the original and new values
                        $originalCategoryName = $currentCategory.Name
                        $newCategoryName = $null

                        # Check if the job category needs to be renamed
                        if ($NewName) {
                            $currentCategory.Rename($NewName[$Category.IndexOf($cat)])
                            $newCategoryName = $currentCategory.Name
                        }

                        Get-DbaAgentJobCategory -SqlInstance $server -Category $newCategoryName
                    } catch {
                        Stop-Function -Message "Something went wrong changing the job category $cat on $instance" -Target $cat -Continue -ErrorRecord $_
                    }
                }
            }
        }
    }
    end {
        Write-Message -Message "Finished changing job category." -Level Verbose
    }
}

tools\dbatools\functions\Set-DbaAgentJob.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Set-DbaAgentJob {
    <#
    .SYNOPSIS
        Set-DbaAgentJob updates a job.

    .DESCRIPTION
        Set-DbaAgentJob updates a job in the SQL Server Agent with parameters supplied.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2000 or greater.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Job
        The name of the job.

    .PARAMETER Schedule
        Schedule to attach to job. This can be more than one schedule.

    .PARAMETER ScheduleId
        Schedule ID to attach to job. This can be more than one schedule ID.

    .PARAMETER NewName
        The new name for the job.

    .PARAMETER Enabled
        Enabled the job.

    .PARAMETER Disabled
        Disabled the job

    .PARAMETER Description
        The description of the job.

    .PARAMETER StartStepId
        The identification number of the first step to execute for the job.

    .PARAMETER Category
        The category of the job.

    .PARAMETER OwnerLogin
        The name of the login that owns the job.

    .PARAMETER EventLogLevel
        Specifies when to place an entry in the Microsoft Windows application log for this job.
        Allowed values 0, "Never", 1, "OnSuccess", 2, "OnFailure", 3, "Always"
        The text value van either be lowercase, uppercase or something in between as long as the text is correct.

    .PARAMETER EmailLevel
        Specifies when to send an e-mail upon the completion of this job.
        Allowed values 0, "Never", 1, "OnSuccess", 2, "OnFailure", 3, "Always"
        The text value van either be lowercase, uppercase or something in between as long as the text is correct.

    .PARAMETER NetsendLevel
        Specifies when to send a network message upon the completion of this job.
        Allowed values 0, "Never", 1, "OnSuccess", 2, "OnFailure", 3, "Always"
        The text value van either be lowercase, uppercase or something in between as long as the text is correct.

    .PARAMETER PageLevel
        Specifies when to send a page upon the completion of this job.
        Allowed values 0, "Never", 1, "OnSuccess", 2, "OnFailure", 3, "Always"
        The text value van either be lowercase, uppercase or something in between as long as the text is correct.

    .PARAMETER EmailOperator
        The e-mail name of the operator to whom the e-mail is sent when EmailLevel is reached.

    .PARAMETER NetsendOperator
        The name of the operator to whom the network message is sent.

    .PARAMETER PageOperator
        The name of the operator to whom a page is sent.

    .PARAMETER DeleteLevel
        Specifies when to delete the job.
        Allowed values 0, "Never", 1, "OnSuccess", 2, "OnFailure", 3, "Always"
        The text value van either be lowercase, uppercase or something in between as long as the text is correct.

    .PARAMETER Force
        The force parameter will ignore some errors in the parameters and assume defaults.

    .PARAMETER InputObject
        Enables piping job objects

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Agent, Job
        Author: Sander Stad (@sqlstad), sqlstad.nl

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Set-DbaAgentJob

    .EXAMPLE
        PS C:\> Set-DbaAgentJob sql1 -Job Job1 -Disabled

        Changes the job to disabled

    .EXAMPLE
        PS C:\> Set-DbaAgentJob sql1 -Job Job1 -OwnerLogin user1

        Changes the owner of the job

    .EXAMPLE
        PS C:\> Set-DbaAgentJob -SqlInstance sql1 -Job Job1 -EventLogLevel OnSuccess

        Changes the job and sets the notification to write to the Windows Application event log on success

    .EXAMPLE
        PS C:\> Set-DbaAgentJob -SqlInstance sql1 -Job Job1 -EmailLevel OnFailure -EmailOperator dba

        Changes the job and sets the notification to send an e-mail to the e-mail operator

    .EXAMPLE
        PS C:\> Set-DbaAgentJob -SqlInstance sql1 -Job Job1, Job2, Job3 -Enabled

        Changes multiple jobs to enabled

    .EXAMPLE
        PS C:\> Set-DbaAgentJob -SqlInstance sql1, sql2, sql3 -Job Job1, Job2, Job3 -Enabled

        Changes multiple jobs to enabled on multiple servers

    .EXAMPLE
        PS C:\> Set-DbaAgentJob -SqlInstance sql1 -Job Job1 -Description 'Just another job' -Whatif

        Doesn't Change the job but shows what would happen.

    .EXAMPLE
        PS C:\> Set-DbaAgentJob -SqlInstance sql1, sql2, sql3 -Job 'Job One' -Description 'Job One'

        Changes a job with the name "Job1" on multiple servers to have another description

    .EXAMPLE
        PS C:\> sql1, sql2, sql3 | Set-DbaAgentJob -Job Job1 -Description 'Job One'

        Changes a job with the name "Job1" on multiple servers to have another description using pipe line

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "Low")]
    param (
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [object[]]$Job,
        [object[]]$Schedule,
        [int[]]$ScheduleId,
        [string]$NewName,
        [switch]$Enabled,
        [switch]$Disabled,
        [string]$Description,
        [int]$StartStepId,
        [string]$Category,
        [string]$OwnerLogin,
        [ValidateSet(0, "Never", 1, "OnSuccess", 2, "OnFailure", 3, "Always")]
        [object]$EventLogLevel,
        [ValidateSet(0, "Never", 1, "OnSuccess", 2, "OnFailure", 3, "Always")]
        [object]$EmailLevel,
        [ValidateSet(0, "Never", 1, "OnSuccess", 2, "OnFailure", 3, "Always")]
        [object]$NetsendLevel,
        [ValidateSet(0, "Never", 1, "OnSuccess", 2, "OnFailure", 3, "Always")]
        [object]$PageLevel,
        [string]$EmailOperator,
        [string]$NetsendOperator,
        [string]$PageOperator,
        [ValidateSet(0, "Never", 1, "OnSuccess", 2, "OnFailure", 3, "Always")]
        [object]$DeleteLevel,
        [switch]$Force,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Agent.Job[]]$InputObject,
        [switch][Alias('Silent')]
        $EnableException
    )

    begin {
        # Check of the event log level is of type string and set the integer value
        if (($EventLogLevel -notin 0, 1, 2, 3) -and ($null -ne $EventLogLevel)) {
            $EventLogLevel = switch ($EventLogLevel) { "Never" { 0 } "OnSuccess" { 1 } "OnFailure" { 2 } "Always" { 3 } }
        }

        # Check of the email level is of type string and set the integer value
        if (($EmailLevel -notin 0, 1, 2, 3) -and ($null -ne $EmailLevel)) {
            $EmailLevel = switch ($EmailLevel) { "Never" { 0 } "OnSuccess" { 1 } "OnFailure" { 2 } "Always" { 3 } }
        }

        # Check of the net send level is of type string and set the integer value
        if (($NetsendLevel -notin 0, 1, 2, 3) -and ($null -ne $NetsendLevel)) {
            $NetsendLevel = switch ($NetsendLevel) { "Never" { 0 } "OnSuccess" { 1 } "OnFailure" { 2 } "Always" { 3 } }
        }

        # Check of the page level is of type string and set the integer value
        if (($PageLevel -notin 0, 1, 2, 3) -and ($null -ne $PageLevel)) {
            $PageLevel = switch ($PageLevel) { "Never" { 0 } "OnSuccess" { 1 } "OnFailure" { 2 } "Always" { 3 } }
        }

        # Check of the delete level is of type string and set the integer value
        if (($DeleteLevel -notin 0, 1, 2, 3) -and ($null -ne $DeleteLevel)) {
            $DeleteLevel = switch ($DeleteLevel) { "Never" { 0 } "OnSuccess" { 1 } "OnFailure" { 2 } "Always" { 3 } }
        }

        # Check the e-mail operator name
        if (($EmailLevel -ge 1) -and (-not $EmailOperator)) {
            Stop-Function -Message "Please set the e-mail operator when the e-mail level parameter is set." -Target $sqlinstance
            return
        }

        # Check the e-mail operator name
        if (($NetsendLevel -ge 1) -and (-not $NetsendOperator)) {
            Stop-Function -Message "Please set the netsend operator when the netsend level parameter is set." -Target $sqlinstance
            return
        }

        # Check the e-mail operator name
        if (($PageLevel -ge 1) -and (-not $PageOperator)) {
            Stop-Function -Message "Please set the page operator when the page level parameter is set." -Target $sqlinstance
            return
        }
    }

    process {

        if (Test-FunctionInterrupt) { return }

        if ((-not $InputObject) -and (-not $Job)) {
            Stop-Function -Message "You must specify a job name or pipe in results from another command" -Target $sqlinstance
            return
        }

        foreach ($instance in $sqlinstance) {
            # Try connecting to the instance
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }

            foreach ($j in $Job) {

                # Check if the job exists
                if ($server.JobServer.Jobs.Name -notcontains $j) {
                    Stop-Function -Message "Job $j doesn't exists on $instance" -Target $instance
                } else {
                    # Get the job
                    try {
                        $InputObject += $server.JobServer.Jobs[$j]

                        # Refresh the object
                        $InputObject.Refresh()
                    } catch {
                        Stop-Function -Message "Something went wrong retrieving the job" -Target $j -ErrorRecord $_ -Continue
                    }
                }
            }
        }

        foreach ($currentjob in $InputObject) {
            $server = $currentjob.Parent.Parent

            #region job options
            # Settings the options for the job
            if ($NewName) {
                Write-Message -Message "Setting job name to $NewName" -Level Verbose
                $currentjob.Rename($NewName)
            }

            if ($Schedule) {
                # Loop through each of the schedules
                foreach ($s in $Schedule) {
                    if ($server.JobServer.SharedSchedules.Name -contains $s) {
                        # Get the schedule ID
                        $sID = $server.JobServer.SharedSchedules[$s].ID

                        # Add schedule to job
                        Write-Message -Message "Adding schedule id $sID to job" -Level Verbose
                        $currentjob.AddSharedSchedule($sID)
                    } else {
                        Stop-Function -Message "Schedule $s cannot be found on instance $instance" -Target $s -Continue
                    }

                }
            }

            if ($ScheduleId) {
                # Loop through each of the schedules IDs
                foreach ($sID in $ScheduleId) {
                    # Check if the schedule is
                    if ($server.JobServer.SharedSchedules.ID -contains $sID) {
                        # Add schedule to job
                        Write-Message -Message "Adding schedule id $sID to job" -Level Verbose
                        $currentjob.AddSharedSchedule($sID)

                    } else {
                        Stop-Function -Message "Schedule ID $sID cannot be found on instance $instance" -Target $sID -Continue
                    }
                }
            }

            if ($Enabled) {
                Write-Message -Message "Setting job to enabled" -Level Verbose
                $currentjob.IsEnabled = $true
            }

            if ($Disabled) {
                Write-Message -Message "Setting job to disabled" -Level Verbose
                $currentjob.IsEnabled = $false
            }

            if ($Description) {
                Write-Message -Message "Setting job description to $Description" -Level Verbose
                $currentjob.Description = $Description
            }

            if ($Category) {
                # Check if the job category exists
                if ($Category -notin $server.JobServer.JobCategories.Name) {
                    if ($Force) {
                        if ($PSCmdlet.ShouldProcess($instance, "Creating job category on $instance")) {
                            try {
                                # Create the category
                                New-DbaAgentJobCategory -SqlInstance $instance -Category $Category

                                Write-Message -Message "Setting job category to $Category" -Level Verbose
                                $currentjob.Category = $Category
                            } catch {
                                Stop-Function -Message "Couldn't create job category $Category from $instance" -Target $instance -ErrorRecord $_
                            }
                        }
                    } else {
                        Stop-Function -Message "Job category $Category doesn't exist on $instance. Use -Force to create it." -Target $instance
                        return
                    }
                } else {
                    Write-Message -Message "Setting job category to $Category" -Level Verbose
                    $currentjob.Category = $Category
                }
            }

            if ($StartStepId) {
                # Get the job steps
                $currentjobSteps = $currentjob.JobSteps

                # Check if there are any job steps
                if ($currentjobSteps.Count -ge 1) {
                    # Check if the start step id value is one of the job steps in the job
                    if ($currentjobSteps.ID -contains $StartStepId) {
                        Write-Message -Message "Setting job start step id to $StartStepId" -Level Verbose
                        $currentjob.StartStepID = $StartStepId
                    } else {
                        Write-Message -Message "The step id is not present in job $j on instance $instance" -Warning
                    }

                } else {
                    Stop-Function -Message "There are no job steps present for job $j on instance $instance" -Target $instance -Continue
                }

            }

            if ($OwnerLogin) {
                # Check if the login name is present on the instance
                if ($server.Logins.Name -contains $OwnerLogin) {
                    Write-Message -Message "Setting job owner login name to $OwnerLogin" -Level Verbose
                    $currentjob.OwnerLoginName = $OwnerLogin
                } else {
                    Stop-Function -Message "The given owner log in name $OwnerLogin does not exist on instance $instance" -Target $instance -Continue
                }
            }

            if ($EventLogLevel) {
                Write-Message -Message "Setting job event log level to $EventlogLevel" -Level Verbose
                $currentjob.EventLogLevel = $EventLogLevel
            }

            if ($EmailLevel) {
                # Check if the notifiction needs to be removed
                if ($EmailLevel -eq 0) {
                    # Remove the operator
                    $currentjob.OperatorToEmail = $null

                    # Remove the notification
                    $currentjob.EmailLevel = $EmailLevel
                } else {
                    # Check if either the operator e-mail parameter is set or the operator is set in the job
                    if ($EmailOperator -or $currentjob.OperatorToEmail) {
                        Write-Message -Message "Setting job e-mail level to $EmailLevel" -Level Verbose
                        $currentjob.EmailLevel = $EmailLevel
                    } else {
                        Stop-Function -Message "Cannot set e-mail level $EmailLevel without a valid e-mail operator name" -Target $instance -Continue
                    }
                }
            }

            if ($NetsendLevel) {
                # Check if the notifiction needs to be removed
                if ($NetsendLevel -eq 0) {
                    # Remove the operator
                    $currentjob.OperatorToNetSend = $null

                    # Remove the notification
                    $currentjob.NetSendLevel = $NetsendLevel
                } else {
                    # Check if either the operator netsend parameter is set or the operator is set in the job
                    if ($NetsendOperator -or $currentjob.OperatorToNetSend) {
                        Write-Message -Message "Setting job netsend level to $NetsendLevel" -Level Verbose
                        $currentjob.NetSendLevel = $NetsendLevel
                    } else {
                        Stop-Function -Message "Cannot set netsend level $NetsendLevel without a valid netsend operator name" -Target $instance -Continue
                    }
                }
            }

            if ($PageLevel) {
                # Check if the notifiction needs to be removed
                if ($PageLevel -eq 0) {
                    # Remove the operator
                    $currentjob.OperatorToPage = $null

                    # Remove the notification
                    $currentjob.PageLevel = $PageLevel
                } else {
                    # Check if either the operator pager parameter is set or the operator is set in the job
                    if ($PageOperator -or $currentjob.OperatorToPage) {
                        Write-Message -Message "Setting job pager level to $PageLevel" -Level Verbose
                        $currentjob.PageLevel = $PageLevel
                    } else {
                        Stop-Function -Message "Cannot set page level $PageLevel without a valid netsend operator name" -Target $instance -Continue
                    }
                }
            }

            # Check the current setting of the job's email level
            if ($EmailOperator) {
                # Check if the operator name is present
                if ($server.JobServer.Operators.Name -contains $EmailOperator) {
                    Write-Message -Message "Setting job e-mail operator to $EmailOperator" -Level Verbose
                    $currentjob.OperatorToEmail = $EmailOperator
                } else {
                    Stop-Function -Message "The e-mail operator name $EmailOperator does not exist on instance $instance. Exiting.." -Target $j -Continue
                }
            }

            if ($NetsendOperator) {
                # Check if the operator name is present
                if ($server.JobServer.Operators.Name -contains $NetsendOperator) {
                    Write-Message -Message "Setting job netsend operator to $NetsendOperator" -Level Verbose
                    $currentjob.OperatorToNetSend = $NetsendOperator
                } else {
                    Stop-Function -Message "The netsend operator name $NetsendOperator does not exist on instance $instance. Exiting.." -Target $j -Continue
                }
            }

            if ($PageOperator) {
                # Check if the operator name is present
                if ($server.JobServer.Operators.Name -contains $PageOperator) {
                    Write-Message -Message "Setting job pager operator to $PageOperator" -Level Verbose
                    $currentjob.OperatorToPage = $PageOperator
                } else {
                    Stop-Function -Message "The page operator name $PageOperator does not exist on instance $instance. Exiting.." -Target $instance -Continue
                }
            }

            if ($DeleteLevel) {
                Write-Message -Message "Setting job delete level to $DeleteLevel" -Level Verbose
                $currentjob.DeleteLevel = $DeleteLevel
            }
            #endregion job options

            # Execute
            if ($PSCmdlet.ShouldProcess($SqlInstance, "Changing the job $j")) {
                try {
                    Write-Message -Message "Changing the job" -Level Verbose

                    # Change the job
                    $currentjob.Alter()
                } catch {
                    Stop-Function -Message "Something went wrong changing the job" -ErrorRecord $_ -Target $instance -Continue
                }
                Get-DbaAgentJob -SqlInstance $server | Where-Object Name -eq $currentjob.name
            }
        }
    }

    end {
        Write-Message -Message "Finished changing job(s)" -Level Verbose
    }
}

tools\dbatools\functions\Set-DbaAgentAlert.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Set-DbaAgentAlert {
    <#
    .SYNOPSIS
        Set-DbaAgentAlert updates a the status of a SQL Agent Alert.

    .DESCRIPTION
        Set-DbaAgentAlert updates an alert in the SQL Server Agent with parameters supplied.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2000 or greater.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Alert
        The name of the alert.

    .PARAMETER NewName
        The new name for the alert.

    .PARAMETER Enabled
        Enabled the alert.

    .PARAMETER Disabled
        Disabled the alert.

    .PARAMETER Force
        The force parameter will ignore some errors in the parameters and assume defaults.

    .PARAMETER InputObject
        Enables piping alert objects

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Agent, Alert
        Author: Garry Bargsley (@gbargsley), garrybargsley.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Set-DbaAgentAlert

    .EXAMPLE
        PS C:\> Set-DbaAgentAlert -SqlInstance sql1 -Alert 'Severity 025: Fatal Error' -Disabled

        Changes the alert to disabled.

    .EXAMPLE
        PS C:\> Set-DbaAgentAlert -SqlInstance sql1 -Alert 'Severity 025: Fatal Error', 'Error Number 825', 'Error Number 824' -Enabled

        Changes multiple alerts to enabled.

    .EXAMPLE
        PS C:\> Set-DbaAgentAlert -SqlInstance sql1, sql2, sql3 -Alert 'Severity 025: Fatal Error', 'Error Number 825', 'Error Number 824' -Enabled

        Changes multiple alerts to enabled on multiple servers.

    .EXAMPLE
        PS C:\> Set-DbaAgentAlert -SqlInstance sql1 -Alert 'Severity 025: Fatal Error' -Disabled -WhatIf

        Doesn't Change the alert but shows what would happen.

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "Low")]
    param (
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [object[]]$Alert,
        [string]$NewName,
        [switch]$Enabled,
        [switch]$Disabled,
        [switch]$Force,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Agent.Alert[]]$InputObject,
        [switch][Alias('Silent')]
        $EnableException
    )

    begin {
    }
    process {

        if (Test-FunctionInterrupt) { return }

        if ((-not $InputObject) -and (-not $Alert)) {
            Stop-Function -Message "You must specify an alert name or pipe in results from another command" -Target $sqlinstance
            return
        }

        foreach ($instance in $sqlinstance) {
            # Try connecting to the instance
            try {
                $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $SqlCredential
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
            }
            foreach ($a in $Alert) {
                # Check if the alert exists
                if ($server.JobServer.Alerts.Name -notcontains $a) {
                    Stop-Function -Message "Alert $a doesn't exists on $instance" -Target $instance
                } else {
                    # Get the alert
                    try {
                        $InputObject += $server.JobServer.Alerts[$a]

                        # Refresh the object
                        $InputObject.Refresh()
                    } catch {
                        Stop-Function -Message "Something went wrong retrieving the alert" -Target $a -ErrorRecord $_ -Continue
                    }
                }
            }
        }

        foreach ($currentalert in $InputObject) {
            $server = $currentalert.Parent.Parent

            #region alert options
            # Settings the options for the alert
            if ($NewName) {
                Write-Message -Message "Setting alert name to $NewName" -Level Verbose
                $currentalert.Rename($NewName)
            }

            if ($Enabled) {
                Write-Message -Message "Setting alert to enabled" -Level Verbose
                $currentalert.IsEnabled = $true
            }

            if ($Disabled) {
                Write-Message -Message "Setting alert to disabled" -Level Verbose
                $currentalert.IsEnabled = $false
            }

            #endregion alert options

            # Execute
            if ($PSCmdlet.ShouldProcess($SqlInstance, "Changing the alert $a")) {
                try {
                    Write-Message -Message "Changing the alert" -Level Verbose

                    # Change the alert
                    $currentalert.Alter()
                } catch {
                    Stop-Function -Message "Something went wrong changing the alert" -ErrorRecord $_ -Target $instance -Continue
                }
                Get-DbaAgentAlert -SqlInstance $server | Where-Object Name -eq $currentalert.name
            }
        }
    }
}

tools\dbatools\functions\Select-DbaBackupInformation.ps1

function Select-DbaBackupInformation {
    <#
    .SYNOPSIS
        Select a subset of backups from a dbatools backup history object

    .DESCRIPTION
        Select-DbaBackupInformation filters out a subset of backups from the dbatools backup history object with parameters supplied.

    .PARAMETER BackupHistory
        A dbatools.BackupHistory object containing backup history records

    .PARAMETER RestoreTime
        The point in time you want to restore to

    .PARAMETER IgnoreLogs
        This switch will cause Log Backups to be ignored. So will restore to the last Full or Diff backup only

    .PARAMETER IgnoreDiffs
        This switch will cause Differential backups to be ignored. Unless IgnoreLogs is specified, restore to point in time will still occur, just using all available log backups

    .PARAMETER DatabaseName
        A string array of Database Names that you want to filter to

    .PARAMETER ServerName
        A string array of Server Names that you want to filter

    .PARAMETER ContinuePoints
        The Output of Get-RestoreContinuableDatabase while provides 'Database',redo_start_lsn,'FirstRecoveryForkID' values. Used to filter backups to continue a restore on a database
        Sets IgnoreDiffs, and also filters databases to only those within the ContinuePoints object, or the ContinuePoints object AND DatabaseName if both specified

    .PARAMETER LastRestoreType
        The Output of Get-DbaDbRestoreHistory -last
        This is used to check the last type of backup to a database to see if a differential backup can be restored

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Backup, Restore
        Author:Stuart Moore (@napalmgram), stuart-moore.com

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Select-DbaBackupInformation

    .EXAMPLE
        PS C:\> $Backups = Get-DbaBackupInformation -SqlInstance Server1 -Path \\server1\backups$
        PS C:\> $FilteredBackups = $Backups | Select-DbaBackupInformation -RestoreTime (Get-Date).AddHours(-1)

        Returns all backups needed to restore all the backups in \\server1\backups$ to 1 hour ago

    .EXAMPLE
        PS C:\> $Backups = Get-DbaBackupInformation -SqlInstance Server1 -Path \\server1\backups$
        PS C:\> $FilteredBackups = $Backups | Select-DbaBackupInformation -RestoreTime (Get-Date).AddHours(-1) -DatabaseName ProdFinance

        Returns all the backups needed to restore Database ProdFinance to an hour ago

    .EXAMPLE
        PS C:\> $Backups = Get-DbaBackupInformation -SqlInstance Server1 -Path \\server1\backups$
        PS C:\> $FilteredBackups = $Backups | Select-DbaBackupInformation -RestoreTime (Get-Date).AddHours(-1) -IgnoreLogs

        Returns all the backups in \\server1\backups$ to restore to as close prior to 1 hour ago as can be managed with only full and differential backups

    .EXAMPLE
        PS C:\> $Backups = Get-DbaBackupInformation -SqlInstance Server1 -Path \\server1\backups$
        PS C:\> $FilteredBackups = $Backups | Select-DbaBackupInformation -RestoreTime (Get-Date).AddHours(-1) -IgnoreDiffs

        Returns all the backups in \\server1\backups$ to restore to 1 hour ago using only Full and Diff backups.

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [object]$BackupHistory,
        [DateTime]$RestoreTime = (get-date).addmonths(1),
        [switch]$IgnoreLogs,
        [switch]$IgnoreDiffs,
        [string[]]$DatabaseName,
        [string[]]$ServerName,
        [object]$ContinuePoints,
        [object]$LastRestoreType,
        [switch]$EnableException
    )
    begin {
        $InternalHistory = @()
        $IgnoreFull = $false
        if ((Test-Bound -ParameterName ContinuePoints) -and $null -ne $ContinuePoints) {
            Write-Message -Message "ContinuePoints provided so setting up for a continue" -Level Verbose
            $IgnoreFull = $true
            $Continue = $True
            if (Test-Bound -ParameterName DatabaseName) {
                $DatabaseName = $DatabaseName | Where-Object {$_ -in ($ContinuePoints | Select-Object -Property Database).Database}

                $DroppedDatabases = $DatabaseName | Where-Object {$_ -notin ($ContinuePoints | Select-Object -Property Database).Database}
                if ($null -ne $DroppedDatabases) {
                    Write-Message -Message "$($DroppedDatabases.join(',')) filtered out as not in ContinuePoints" -Level Verbose
                }
            } else {
                $DatabaseName = ($ContinuePoints | Select-Object -Property Database).Database
            }
        }
    }
    process {
        $internalHistory += $BackupHistory
    }

    end {
        ForEach ($History in $InternalHistory) {
            if ("RestoreTime" -notin $History.PSobject.Properties.name) {
                $History | Add-Member -Name 'RestoreTime' -Type NoteProperty -Value $RestoreTime
            }
        }
        if ((Test-Bound -ParameterName DatabaseName) -and '' -ne $DatabaseName) {
            Write-Message -Message "Filtering by DatabaseName" -Level Verbose
            #  $InternalHistory = $InternalHistory | Where-Object {$_.Database -in $DatabaseName}
        }

        if (Test-Bound -ParameterName ServerName) {
            Write-Message -Message "Filtering by ServerName" -Level Verbose
            $InternalHistory = $InternalHistory | Where-Object {$_.InstanceName -in $servername}
        }

        $Databases = ($InternalHistory | Select-Object -Property Database -unique).Database
        if ($continue -and $Databases.count -gt 1 -and $DatabaseName.count -gt 1) {
            Stop-Function -Message "Cannot perform continuing restores on multiple databases with renames, exiting"
            return
        }


        ForEach ($Database in $Databases) {
            #Cope with restores renaming the db
            # $database = the name of database in the backups being scanned
            # $databasefilter = the name of the database the backups are being restore to/against
            if ($null -ne $DatabaseName) {
                $databasefilter = $DatabaseName
            } else {
                $databasefilter = $database
            }

            if ($true -eq $Continue) {
                #Test if Database is in a continuing state and the LSN to continue from:
                if ($Databasefilter -in ($ContinuePoints | Select-Object -Property Database).Database) {
                    Write-Message -Message "$Database in ContinuePoints, will attmept to continue" -Level verbose
                    $IgnoreFull = $True
                    #Check what the last backup restored was
                    if (($LastRestoreType | Where-Object {$_.Database -eq $Databasefilter}).RestoreType -eq 'log') {
                        #log Backup last restored, so diffs cannot be used
                        $IgnoreDiffs = $true
                    } else {
                        #Last restore was a diff or full, so can restore diffs or logs
                        $IgnoreDiffs = $false
                    }
                } else {
                    Write-Message -Message "$Database not in ContinuePoints, will attmept normal restore" -Level Warning
                }
            }

            $dbhistory = @()
            $DatabaseHistory = $internalhistory | Where-Object {$_.Database -eq $Database}
            #For a standard restore, work out the full backup
            if ($false -eq $IgnoreFull) {
                $Full = $DatabaseHistory | Where-Object {$_.Type -in ('Full', 'Database') -and $_.Start -le $RestoreTime} | Sort-Object -Property LastLsn -Descending | Select-Object -First 1
                if ($full.Fullname) {
                    $full.Fullname = ($DatabaseHistory | Where-Object { $_.Type -in ('Full', 'Database') -and $_.BackupSetID -eq $Full.BackupSetID }).Fullname
                } else {
                    Stop-Function -Message "Fullname property not found. This could mean that a full backup could not be found or the command must be re-run with the -Continue switch."
                    return
                }
                $dbHistory += $full
            } elseif ($true -eq $IgnoreFull -and $false -eq $IgnoreDiffs) {
                #Fake the Full backup
                Write-Message -Message "Continuing, so setting a fake full backup from the existing database"
                $Full = [PsCustomObject]@{
                    CheckpointLSN = ($ContinuePoints | Where-Object {$_.Database -eq $DatabaseFilter}).differential_base_lsn
                }
            }

            if ($false -eq $IgnoreDiffs) {
                Write-Message -Message "processing diffs" -Level Verbose
                $Diff = $DatabaseHistory | Where-Object {$_.Type -in ('Differential', 'Database Differential') -and $_.Start -le $RestoreTime -and $_.DatabaseBackupLSN -eq $Full.CheckpointLSN} | Sort-Object -Property LastLsn -Descending | Select-Object -First 1
                if ($null -ne $Diff) {
                    if ($Diff.FullName) {
                        $Diff.FullName = ($DatabaseHistory | Where-Object { $_.Type -in ('Differential', 'Database Differential') -and $_.BackupSetID -eq $diff.BackupSetID }).Fullname
                    } else {
                        Stop-Function -Message "Fullname property not found. This could mean that a full backup could not be found or the command must be re-run with the -Continue switch."
                        return
                    }
                    $dbhistory += $Diff
                }
            }

            #Sort out the LSN for the log restores
            if ($null -ne ($dbHistory | Sort-Object -Property LastLsn -Descending | select-object -First 1).lastLsn) {
                #We have history so use this
                [bigint]$LogBaseLsn = ($dbHistory | Sort-Object -Property LastLsn -Descending | select-object -First 1).lastLsn.ToString()
                $FirstRecoveryForkID = $Full.FirstRecoveryForkID
                Write-Message -Level Verbose -Message "Found LogBaseLsn: $LogBaseLsn and FirstRecoveryForkID: $FirstRecoveryForkID"
            } else {
                Write-Message -Message "No full or diff, so attempting to pull from Continue informmation" -Level Verbose
                try {
                    [bigint]$LogBaseLsn = ($ContinuePoints | Where-Object {$_.Database -eq $DatabaseFilter}).redo_start_lsn
                    $FirstRecoveryForkID = ($ContinuePoints | Where-Object {$_.Database -eq $DatabaseFilter}).FirstRecoveryForkID
                    Write-Message -Level Verbose -Message "Found LogBaseLsn: $LogBaseLsn and FirstRecoveryForkID: $FirstRecoveryForkID from Continue information"
                } catch {
                    Stop-Function -Message "Failed to find LSN or RecoveryForkID for $DatabaseFilter" -Category InvalidOperation -Target $DatabaseFilter
                }
            }

            if ($true -eq $IgnoreFull -and $true -eq $IgnoreDiffs) {
                #Set a Fake starting LSN
            }

            if ($false -eq $IgnoreLogs) {
                $FilteredLogs = $DatabaseHistory | Where-Object {$_.Type -in ('Log', 'Transaction Log') -and $_.Start -le $RestoreTime -and $_.LastLSN.ToString() -ge $LogBaseLsn -and $_.FirstLSN -ne $_.LastLSN}  | Sort-Object -Property LastLsn, FirstLsn
                $GroupedLogs = $FilteredLogs | Group-Object -Property LastLSN, FirstLSN
                ForEach ($Group in $GroupedLogs) {
                    $Log = $DatabaseHistory | Where-Object { $_.BackupSetID -eq $Group.group[0].BackupSetID } | select-object -First 1
                    if ($Log.FullName) {
                        $Log.FullName = ($DatabaseHistory | Where-Object { $_.BackupSetID -eq $Group.group[0].BackupSetID }).Fullname
                    } else {
                        Stop-Function -Message "Fullname property not found. This could mean that a full backup could not be found or the command must be re-run with the -Continue switch."
                        return
                    }
                    #$dbhistory += $Log
                    $dbhistory += $DatabaseHistory | Where-Object {$_.BackupSetID -eq $Group.group[0].BackupSetID}
                }
                # Get Last T-log
                $dbHistory += $DatabaseHistory | Where-Object {$_.Type -in ('Log', 'Transaction Log') -and $_.End -ge $RestoreTime -and $_.DatabaseBackupLSN -eq $Full.CheckpointLSN} | Sort-Object -Property LastLsn, FirstLsn  | Select-Object -First 1
            }
            $dbhistory
        }
    }
}

tools\dbatools\functions\Save-DbaDiagnosticQueryScript.ps1

function Save-DbaDiagnosticQueryScript {
    <#
    .SYNOPSIS
        Save-DbaDiagnosticQueryScript downloads the most recent version of all Glenn Berry DMV scripts

    .DESCRIPTION
        The dbatools module will have the diagnostic queries pre-installed. Use this only to update to a more recent version or specific versions.

        This function is mainly used by Invoke-DbaDiagnosticQuery, but can also be used independently to download the Glenn Berry DMV scripts.

        Use this function to pre-download the scripts from a device with an Internet connection.

        The function Invoke-DbaDiagnosticQuery will try to download these scripts automatically, but it obviously needs an internet connection to do that.

    .PARAMETER Path
        Specifies the path to the output

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Diagnostic, DMV, Troubleshooting
        Author: Andre Kamman (@AndreKamman), http://clouddba.io

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        PS C:\> Save-DbaDiagnosticQueryScript -Path c:\temp

        Downloads the most recent version of all Glenn Berry DMV scripts to the specified location.
        If Path is not specified, the "My Documents" location will be used.

    #>
    [CmdletBinding()]
    param (
        [System.IO.FileInfo]$Path = [Environment]::GetFolderPath("mydocuments"),
        [Alias('Silent')]
        [switch]$EnableException
    )
    function Get-WebData {
        param ($uri)
        try {
            try {
                $data = (Invoke-TlsWebRequest -uri $uri -ErrorAction Stop)
            } catch {
                (New-Object System.Net.WebClient).Proxy.Credentials = [System.Net.CredentialCache]::DefaultNetworkCredentials
                $data = (Invoke-TlsWebRequest -uri $uri -ErrorAction Stop)
            }
            return $data
        } catch {
            Stop-Function -Message "Invoke-TlsWebRequest failed: $_" -Target $data -ErrorRecord $_
            return
        }
    }

    if (-not (Test-Path $Path)) {
        Stop-Function -Message "Path does not exist or access denied" -Target $path
        return
    }

    Add-Type -AssemblyName System.Web
    $glenberryrss = "http://www.sqlskills.com/blogs/glenn/feed/"
    $glenberrysql = @()

    Write-Message -Level Output -Message "Downloading RSS Feed"
    $rss = [xml](get-webdata -uri $glenberryrss)
    $Feed = $rss.rss.Channel

    $glenberrysql = @()
    $RssPostFilter = "SQL Server Diagnostic Information Queries for*"
    $DropboxLinkFilter = "*dropbox.com*"
    $LinkTitleFilter = "*Diagnostic*"

    foreach ($post in $Feed.item) {
        if ($post.title -like $RssPostFilter) {
            # We found the first post that matches it, lets go visit and scrape.
            $page = Get-WebData -uri $post.link
            $glenberrysql += ($page.Links | Where-Object { $_.href -like $DropboxLinkFilter -and $_.innerText -like $LinkTitleFilter } | ForEach-Object {
                    [pscustomobject]@{
                        URL        = $_.href
                        SQLVersion = $_.innerText -replace " Diagnostic Information Queries", "" -replace "SQL Server ", "" -replace ' ', ''
                        FileYear   = ($post.title -split " ")[-1]
                        FileMonth  = "{0:00}" -f [int]([CultureInfo]::InvariantCulture.DateTimeFormat.MonthNames.IndexOf(($post.title -split " ")[-2]))
                    }
                })
            break
        }
    }
    Write-Message -Level Output -Message "Found $($glenberrysql.Count) documents to download"
    foreach ($doc in $glenberrysql) {
        try {
            Write-Message -Level Output -Message "Downloading $($doc.URL)"
            $filename = "{0}\SQLServerDiagnosticQueries_{1}_{2}.sql" -f $Path, $doc.SQLVersion, "$($doc.FileYear)$($doc.FileMonth)"
            Invoke-TlsWebRequest -Uri $doc.URL -OutFile $filename -ErrorAction Stop
        } catch {
            Stop-Function -Message "Requesting and writing file failed: $_" -Target $filename -ErrorRecord $_
            return
        }
    }
}

tools\dbatools\functions\Revoke-DbaAgPermission.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Revoke-DbaAgPermission {
    <#
    .SYNOPSIS
        Revokes endpoint and availability group permissions to a login.

    .DESCRIPTION
        Revokes endpoint and availability group permissions to a login.

   .PARAMETER SqlInstance
        The target SQL Server instance or instances. Server version must be SQL Server version 2012 or higher.

    .PARAMETER SqlCredential
        Login to the SqlInstance instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Login
        The login or logins to modify.

    .PARAMETER AvailabilityGroup
        Only modify specific availability groups.

    .PARAMETER Type
        Specify type: Endpoint or AvailabilityGroup. Endpoint will modify the DatabaseMirror endpoint type.

    .PARAMETER Permission
        Revokes one or more permissions:
            Alter
            Connect
            Control
            CreateAnyDatabase
            CreateSequence
            Delete
            Execute
            Impersonate
            Insert
            Receive
            References
            Select
            Send
            TakeOwnership
            Update
            ViewChangeTracking
            ViewDefinition

        Connect is default.

    .PARAMETER InputObject
        Enables piping from Get-DbaLogin.

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: AvailabilityGroup, HA, AG
        Author: Chrissy LeMaire (@cl), netnerds.net
        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Revoke-DbaAgPermission

    .EXAMPLE
        PS C:\> Revoke-DbaAgPermission -SqlInstance sql2017a -Type AvailabilityGroup -AvailabilityGroup SharePoint -Login ad\spservice -Permission CreateAnyDatabase

        Removes CreateAnyDatabase permissions from ad\spservice on the SharePoint availability group on sql2017a. Does not prompt for confirmation.

    .EXAMPLE
        PS C:\> Revoke-DbaAgPermission -SqlInstance sql2017a -Type AvailabilityGroup -AvailabilityGroup ag1, ag2 -Login ad\spservice -Permission CreateAnyDatabase -Confirm

        Removes CreateAnyDatabase permissions from ad\spservice on the ag1 and ag2 availability groups on sql2017a. Prompts for confirmation.

    .EXAMPLE
        PS C:\> Get-DbaLogin -SqlInstance sql2017a | Out-GridView -Passthru | Revoke-DbaAgPermission -Type EndPoint

        Revokes the selected logins Connect permissions on the DatabaseMirroring endpoint for sql2017a.
    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'Low')]
    param (
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$Login,
        [string[]]$AvailabilityGroup,
        [parameter(Mandatory)]
        [ValidateSet('Endpoint', 'AvailabilityGroup')]
        [string[]]$Type,
        [ValidateSet('Alter', 'Connect', 'Control', 'CreateAnyDatabase', 'CreateSequence', 'Delete', 'Execute', 'Impersonate', 'Insert', 'Receive', 'References', 'Select', 'Send', 'TakeOwnership', 'Update', 'ViewChangeTracking', 'ViewDefinition')]
        [string[]]$Permission = "Connect",
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Login[]]$InputObject,
        [switch]$EnableException
    )
    process {
        if ($SqlInstance -and -not $Login -and -not $AvailabilityGroup) {
            Stop-Function -Message "You must specify one or more logins when using the SqlInstance parameter."
            return
        }

        if ($Type -contains "AvailabilityGroup" -and -not $AvailabilityGroup) {
            Stop-Function -Message "You must specify at least one availability group when using the AvailabilityGroup type."
            return
        }

        foreach ($instance in $SqlInstance) {
            if ($perm -contains "CreateAnyDatabase") {
                try {
                    $server = Connect-SqlInstance -SqlInstance $instance -SqlCredential $sqlcredential
                } catch {
                    Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $instance -Continue
                }

                foreach ($ag in $AvailabilityGroup) {
                    try {
                        $server.Query("ALTER AVAILABILITY GROUP $ag GRANT CREATE ANY DATABASE")
                    } catch {
                        Stop-Function -Message "Failure" -ErrorRecord $_ -Target $instance
                        return
                    }
                }
            } elseif ($Login) {
                $InputObject += Get-DbaLogin -SqlInstance $instance -SqlCredential $SqlCredential -Login $Login
                foreach ($account in $Login) {
                    if ($account -notin $InputObject.Name) {
                        try {
                            $InputObject += New-DbaLogin -SqlInstance $server -Login $account -EnableException
                        } catch {
                            Stop-Function -Message "Failure" -ErrorRecord $_ -Target $instance
                            return
                        }
                    }
                }
            }
        }

        foreach ($account in $InputObject) {
            $server = $account.Parent
            if ($Type -contains "Endpoint") {
                $server.Endpoints.Refresh()
                $endpoint = $server.Endpoints | Where-Object EndpointType -eq DatabaseMirroring

                if (-not $endpoint) {
                    Stop-Function -Message "DatabaseMirroring endpoint does not exist on $server" -Target $server -Continue
                }

                foreach ($perm in $Permission) {
                    if ($Pscmdlet.ShouldProcess($server.Name, "Revokeing $perm on $endpoint")) {
                        if ($perm -in 'CreateAnyDatabase') {
                            Stop-Function -Message "$perm not supported by endpoints" -Continue
                        }
                        try {
                            $bigperms = New-Object Microsoft.SqlServer.Management.Smo.ObjectPermissionSet([Microsoft.SqlServer.Management.Smo.ObjectPermission]::$perm)
                            $endpoint.Revoke($bigperms, $account.Name)
                            [pscustomobject]@{
                                ComputerName = $account.ComputerName
                                InstanceName = $account.InstanceName
                                SqlInstance  = $account.SqlInstance
                                Name         = $account.Name
                                Permission   = $perm
                                Type         = "Revoke"
                                Status       = "Success"
                            }
                        } catch {
                            Stop-Function -Message "Failure" -ErrorRecord $_ -Target $ag -Continue
                        }
                    }
                }
            }

            if ($Type -contains "AvailabilityGroup") {
                $ags = Get-DbaAvailabilityGroup -SqlInstance $account.Parent -AvailabilityGroup $AvailabilityGroup
                foreach ($ag in $ags) {
                    foreach ($perm in $Permission) {
                        if ($perm -notin 'Alter', 'Control', 'TakeOwnership', 'ViewDefinition') {
                            Stop-Function -Message "$perm not supported by availability groups" -Continue
                        }
                        if ($Pscmdlet.ShouldProcess($server.Name, "Revokeing $perm on $ags")) {
                            try {
                                $bigperms = New-Object Microsoft.SqlServer.Management.Smo.ObjectPermissionSet([Microsoft.SqlServer.Management.Smo.ObjectPermission]::$perm)
                                $ag.Revoke($bigperms, $account.Name)
                                [pscustomobject]@{
                                    ComputerName = $account.ComputerName
                                    InstanceName = $account.InstanceName
                                    SqlInstance  = $account.SqlInstance
                                    Name         = $account.Name
                                    Permission   = $perm
                                    Type         = "Revoke"
                                    Status       = "Success"
                                }
                            } catch {
                                Stop-Function -Message "Failure" -ErrorRecord $_ -Target $ag -Continue
                            }
                        }
                    }
                }
            }
        }
    }
}

tools\dbatools\functions\Resume-DbaAgDbDataMovement.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Resume-DbaAgDbDataMovement {
    <#
    .SYNOPSIS
        Resumes data movement for an availability group database on a SQL Server instance.

    .DESCRIPTION
        Resumes data movement for an availability group database on a SQL Server instance.

   .PARAMETER SqlInstance
        The target SQL Server instance or instances. Server version must be SQL Server version 2012 or higher.

    .PARAMETER SqlCredential
        Login to the SqlInstance instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The database or databases to resume movement upon.

    .PARAMETER AvailabilityGroup
        The availability group where the database movement will be resumeed.

    .PARAMETER InputObject
        Enables piping from Get-DbaAgDatabase

    .PARAMETER WhatIf
        Shows what would happen if the command were to run. No actions are actually performed.

    .PARAMETER Confirm
        Prompts you for confirmation before executing any changing operations within the command.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: AvailabilityGroup, HA, AG
        Author: Chrissy LeMaire (@cl), netnerds.net
        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Resume-DbaAgDbDataMovement

    .EXAMPLE
        PS C:\> Resume-DbaAgDbDataMovement -SqlInstance sql2017a -AvailabilityGroup ag1 -Database db1, db2

        Resumes data movement on db1 and db2 to ag1 on sql2017a. Prompts for confirmation.

    .EXAMPLE
        PS C:\> Get-DbaAgDatabase -SqlInstance sql2017a, sql2019 | Out-GridView -Passthru | Resume-DbaAgDbDataMovement -Confirm:$false

        Resumes data movement on the selected availability group databases. Does not prompt for confirmation.

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'High')]
    param (
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string]$AvailabilityGroup,
        [string[]]$Database,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.AvailabilityDatabase[]]$InputObject,
        [switch]$EnableException
    )
    process {
        if ((Test-Bound -ParameterName SqlInstance)) {
            if ((Test-Bound -Not -ParameterName Database) -and (Test-Bound -Not -ParameterName AvailabilityGroup)) {
                Stop-Function -Message "You must specify one or more databases and one Availability Groups when using the SqlInstance parameter."
                return
            }
        }

        foreach ($instance in $SqlInstance) {
            $InputObject += Get-DbaAgDatabase -SqlInstance $instance -SqlCredential $SqlCredential -Database $Database
        }

        foreach ($agdb in $InputObject) {
            if ($Pscmdlet.ShouldProcess($ag.Parent.Name, "Seting availability group $db to $($db.Parent.Name)")) {
                try {
                    $null = $agdb.ResumeDataMovement()
                    $agdb
                } catch {
                    Stop-Function -Message "Failure" -ErrorRecord $_ -Continue
                }
            }
        }
    }
}

tools\dbatools\functions\Watch-DbaXESession.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Watch-DbaXESession {
    <#
    .SYNOPSIS
        Watch live XEvent Data as it happens

    .DESCRIPTION
        Watch live XEvent Data as it happens. This command runs until you stop the session, kill the PowerShell session, or Ctrl-C.

        Thanks to Dave Mason (@BeginTry) for some straightforward code samples https://itsalljustelectrons.blogspot.be/2017/01/SQL-Server-Extended-Event-Handling-Via-Powershell.html

    .PARAMETER SqlInstance
        The target SQL Server instance or instances. You must have sysadmin access and server version must be SQL Server version 2008 or higher.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Session
        Only return a specific session. Options for this parameter are auto-populated from the server.

    .PARAMETER Raw
        If this switch is enabled, the Microsoft.SqlServer.XEvent.Linq.QueryableXEventData enumeration object is returned.

    .PARAMETER InputObject
        Accepts an XESession object returned by Get-DbaXESession.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: ExtendedEvent, XE, XEvent
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Watch-DbaXESession

    .EXAMPLE
        PS C:\> Watch-DbaXESession -SqlInstance sql2017 -Session system_health

        Shows events for the system_health session as it happens.

    .EXAMPLE
        PS C:\> Watch-DbaXESession -SqlInstance sql2017 -Session system_health | Export-Csv -NoTypeInformation -Path C:\temp\system_health.csv

        Exports live events to CSV. Ctrl-C may not not cancel out of it - fastest way is to stop the session.

    .EXAMPLE
        PS C:\> Get-DbaXESession -SqlInstance sql2017 -Session system_health | Start-DbaXESession | Watch-DbaXESession | Export-Csv -NoTypeInformation -Path C:\temp\system_health.csv

        Exports live events to CSV. Ctrl-C may not not cancel out of this. The fastest way to do so is to stop the session.

    #>
    [CmdletBinding(DefaultParameterSetName = "Default")]
    param (
        [parameter(ValueFromPipeline, ParameterSetName = "instance", Mandatory)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string]$Session,
        [parameter(ValueFromPipeline, ParameterSetName = "piped", Mandatory)]
        [Microsoft.SqlServer.Management.XEvent.Session]$InputObject,
        [switch]$Raw,
        [switch][Alias('Silent')]
        $EnableException
    )
    process {
        if (-not $SqlInstance) {

        } else {
            try {
                $server = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential -MinimumVersion 11
            } catch {
                Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $SqlInstance -Continue
            }
            $SqlConn = $server.ConnectionContext.SqlConnectionObject
            $SqlStoreConnection = New-Object Microsoft.SqlServer.Management.Sdk.Sfc.SqlStoreConnection $SqlConn
            $XEStore = New-Object  Microsoft.SqlServer.Management.XEvent.XEStore $SqlStoreConnection
            Write-Message -Level Verbose -Message "Getting XEvents Sessions on $SqlInstance."
            $InputObject += $XEStore.sessions | Where-Object Name -eq $Session
        }

        foreach ($xesession in $InputObject) {
            $server = $xesession.Parent
            $sessionname = $xesession.Name
            Write-Message -Level Verbose -Message "Watching $sessionname on $($server.Name)."

            if (-not $xesession.IsRunning -and -not $xesession.IsRunning) {
                Stop-Function -Message "$($xesession.Name) is not running on $($server.Name)" -Continue
            }

            # Setup all columns for csv but do it in an order
            $columns = @("name", "timestamp")
            $newcolumns = @()

            $fields = ($xesession.Events.EventFields.Name | Select-Object -Unique)
            foreach ($column in $fields) {
                $newcolumns += $column.TrimStart("collect_")
            }

            $actions = ($xesession.Events.Actions.Name | Select-Object -Unique)
            foreach ($action in $actions) {
                $newcolumns += ($action -Split '\.')[-1]
            }

            $newcolumns = $newcolumns | Sort-Object
            $columns = ($columns += $newcolumns) | Select-Object -Unique

            try {
                $xevent = New-Object -TypeName Microsoft.SqlServer.XEvent.Linq.QueryableXEventData(
                    ($server.ConnectionContext.ConnectionString),
                    ($xesession.Name),
                    [Microsoft.SqlServer.XEvent.Linq.EventStreamSourceOptions]::EventStream,
                    [Microsoft.SqlServer.XEvent.Linq.EventStreamCacheOptions]::DoNotCache
                )

                if ($raw) {
                    return $xevent
                }

                # Format output
                foreach ($event in $xevent) {
                    $hash = [ordered]@{}

                    foreach ($column in $columns) {
                        $null = $hash.Add($column, $event.$column) # this basically adds name and timestamp then nulls
                    }

                    foreach ($action in $event.Actions) {
                        $hash[$action.Name] = $action.Value
                    }

                    foreach ($field in $event.Fields) {
                        $hash[$field.Name] = $field.Value
                    }

                    [PSCustomObject]($hash)
                }
            } catch {
                Start-Sleep 1
                $status = Get-DbaXESession -SqlInstance $server -Session $sessionname
                if ($status.Status -ne "Running") {
                    Stop-Function -Message "$($xesession.Name) was stopped."
                } else {
                    Stop-Function -Message "Failure" -ErrorRecord $_ -Target $sessionname
                }
            } finally {
                if ($xevent -is [IDisposable]) {
                    $xevent.Dispose()
                }
            }
        }
    }
}

tools\dbatools\functions\Write-DbaDataTable.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Write-DbaDataTable {
    <#
    .SYNOPSIS
        Writes data to a SQL Server Table.

    .DESCRIPTION
        Writes a .NET DataTable to a SQL Server table using SQL Bulk Copy.

    .PARAMETER SqlInstance
        The target SQL Server instance or instances.

    .PARAMETER SqlCredential
        Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

    .PARAMETER Database
        The database to import the table into.

    .PARAMETER InputObject
        This is the DataTable (or data row) to import to SQL Server.

    .PARAMETER Table
        The table name to import data into. You can specify a one, two, or three part table name. If you specify a one or two part name, you must also use -Database.

        If the table does not exist, you can use -AutoCreateTable to automatically create the table with inefficient data types.

        If the object has special characters please wrap them in square brackets [ ].
        Using dbo.First.Table will try to import to a table named 'Table' on schema 'First' and database 'dbo'.
        The correct way to import to a table named 'First.Table' on schema 'dbo' is by passing dbo.[First.Table]
        Any actual usage of the ] must be escaped by duplicating the ] character.
        The correct way to import to a table Name] in schema Schema.Name is by passing [Schema.Name].[Name]]]

    .PARAMETER Schema
        Defaults to dbo if no schema is specified.

    .PARAMETER BatchSize
        The BatchSize for the import defaults to 5000.

    .PARAMETER NotifyAfter
        Sets the option to show the notification after so many rows of import

    .PARAMETER AutoCreateTable
        If this switch is enabled, the table will be created if it does not already exist. The table will be created with sub-optimal data types such as nvarchar(max)

    .PARAMETER NoTableLock
        If this switch is enabled, a table lock (TABLOCK) will not be placed on the destination table. By default, this operation will lock the destination table while running.

    .PARAMETER CheckConstraints
        If this switch is enabled, the SqlBulkCopy option to process check constraints will be enabled.

        Per Microsoft "Check constraints while data is being inserted. By default, constraints are not checked."

    .PARAMETER FireTriggers
        If this switch is enabled, the SqlBulkCopy option to fire insert triggers will be enabled.

        Per Microsoft "When specified, cause the server to fire the insert triggers for the rows being inserted into the Database."

    .PARAMETER KeepIdentity
        If this switch is enabled, the SqlBulkCopy option to preserve source identity values will be enabled.

        Per Microsoft "Preserve source identity values. When not specified, identity values are assigned by the destination."

    .PARAMETER KeepNulls
        If this switch is enabled, the SqlBulkCopy option to preserve NULL values will be enabled.

        Per Microsoft "Preserve null values in the destination table regardless of the settings for default values. When not specified, null values are replaced by default values where applicable."

    .PARAMETER Truncate
        If this switch is enabled, the destination table will be truncated after prompting for confirmation.

    .PARAMETER BulkCopyTimeOut
        Value in seconds for the BulkCopy operations timeout. The default is 30 seconds.

    .PARAMETER RegularUser
        Deprecated - now all connections are regular user (don't require admin)

    .PARAMETER WhatIf
        If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

    .PARAMETER Confirm
        If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER UseDynamicStringLength
        By default, all string columns will be NVARCHAR(MAX).
        If this switch is enabled, all columns will get the length specified by the column's MaxLength property (if specified)

    .NOTES
        Tags: DataTable, Insert
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Write-DbaDataTable

    .EXAMPLE
        PS C:\> $DataTable = Import-Csv C:\temp\customers.csv
        PS C:\> Write-DbaDataTable -SqlInstance sql2014 -InputObject $DataTable -Table mydb.dbo.customers

        Performs a bulk insert of all the data in customers.csv into database mydb, schema dbo, table customers. A progress bar will be shown as rows are inserted. If the destination table does not exist, the import will be halted.

    .EXAMPLE
        PS C:\> $DataTable = Import-Csv C:\temp\customers.csv
        PS C:\> $DataTable | Write-DbaDataTable -SqlInstance sql2014 -Table mydb.dbo.customers

        Performs a row by row insert of the data in customers.csv. This is significantly slower than a bulk insert and will not show a progress bar.
        This method is not recommended. Use -InputObject instead.

    .EXAMPLE
        PS C:\> $DataTable = Import-Csv C:\temp\customers.csv
        PS C:\> Write-DbaDataTable -SqlInstance sql2014 -InputObject $DataTable -Table mydb.dbo.customers -AutoCreateTable -Confirm

        Performs a bulk insert of all the data in customers.csv. If mydb.dbo.customers does not exist, it will be created with inefficient but forgiving DataTypes.

        Prompts for confirmation before a variety of steps.

    .EXAMPLE
        PS C:\> $DataTable = Import-Csv C:\temp\customers.csv
        PS C:\> Write-DbaDataTable -SqlInstance sql2014 -InputObject $DataTable -Table mydb.dbo.customers -Truncate

        Performs a bulk insert of all the data in customers.csv. Prior to importing into mydb.dbo.customers, the user is informed that the table will be truncated and asks for confirmation. The user is prompted again to perform the import.

    .EXAMPLE
        PS C:\> $DataTable = Import-Csv C:\temp\customers.csv
        PS C:\> Write-DbaDataTable -SqlInstance sql2014 -InputObject $DataTable -Database mydb -Table customers -KeepNulls

        Performs a bulk insert of all the data in customers.csv into mydb.dbo.customers. Because Schema was not specified, dbo was used. NULL values in the destination table will be preserved.

    .EXAMPLE
        PS C:\> $passwd = ConvertTo-SecureString "P@ssw0rd" -AsPlainText -Force
        PS C:\> $AzureCredential = New-Object System.Management.Automation.PSCredential("AzureAccount"),$passwd)
        PS C:\> $DataTable = Import-Csv C:\temp\customers.csv
        PS C:\> Write-DbaDataTable -SqlInstance AzureDB.database.windows.net -InputObject $DataTable -Database mydb -Table customers -KeepNulls -Credential $AzureCredential -BulkCopyTimeOut 300

        This performs the same operation as the previous example, but against a SQL Azure Database instance using the required credentials.

    .EXAMPLE
        PS C:\> $process = Get-Process
        PS C:\> Write-DbaDataTable -InputObject $process -SqlInstance sql2014 -Table "[[DbName]]].[Schema.With.Dots].[`"[Process]]`"]" -AutoCreateTable

        Creates a table based on the Process object with over 60 columns, converted from PowerShell data types to SQL Server data types. After the table is created a bulk insert is performed to add process information into the table
        Writes the results of Get-Process to a table named: "[Process]" in schema named: Schema.With.Dots in database named: [DbName]
        The Table name, Schema name and Database name must be wrapped in square brackets [ ]
        Special charcters like " must be escaped by a ` charcter.
        In addition any actual instance of the ] character must be escaped by being duplicated.

        This is an example of the type conversion in action. All process properties are converted, including special types like TimeSpan. Script properties are resolved before the type conversion starts thanks to ConvertTo-DbaDataTable.

    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "Low")]
    param (
        [Parameter(Position = 0, Mandatory)]
        [Alias("ServerInstance", "SqlServer")]
        [ValidateNotNull()]
        [DbaInstanceParameter]$SqlInstance,
        [Parameter(Position = 1)]
        [ValidateNotNull()]
        [Alias("Credential")]
        [PSCredential]$SqlCredential,
        [Parameter(Position = 2)]
        [object]$Database,
        [Parameter(Mandatory, ValueFromPipeline)]
        [Alias("DataTable")]
        [ValidateNotNull()]
        [object]$InputObject,
        [Parameter(Position = 3, Mandatory)]
        [ValidateNotNullOrEmpty()]
        [string]$Table,
        [Parameter(Position = 4)]
        [ValidateNotNullOrEmpty()]
        [string]$Schema = 'dbo',
        [ValidateNotNull()]
        [int]$BatchSize = 50000,
        [ValidateNotNull()]
        [int]$NotifyAfter = 5000,
        [switch]$AutoCreateTable,
        [switch]$NoTableLock,
        [switch]$CheckConstraints,
        [switch]$FireTriggers,
        [switch]$KeepIdentity,
        [switch]$KeepNulls,
        [switch]$Truncate,
        [ValidateNotNull()]
        [int]$bulkCopyTimeOut = 5000,
        [switch]$RegularUser,
        [Alias('Silent')]
        [switch]$EnableException,
        [switch]$UseDynamicStringLength
    )

    begin {
        # Null variable to make sure upper-scope variables don't interfere later
        $steppablePipeline = $null

        #region Utility Functions
        function Invoke-BulkCopy {
            <#
            .SYNOPSIS
                Copies a datatable in bulk over to a table.

            .DESCRIPTION
                Copies a datatable in bulk over to a table.

            .PARAMETER DataTable
                The datatable to copy.

            .PARAMETER SqlInstance
                Needs not be specified. The SqlInstance targeted. For message purposes only.

            .PARAMETER Fqtn
                Needs not be specified. The fqtn written to. For message purposes only.

            .PARAMETER BulkCopy
                Needs not be specified. The bulk copy object used to perform the copy operation.
        #>
            [CmdletBinding()]
            param (
                $DataTable,
                [DbaInstance]$SqlInstance = $SqlInstance,
                [string]$Fqtn = $fqtn,
                $BulkCopy = $bulkCopy
            )
            Write-Message -Level Verbose -Message "Importing in bulk to $fqtn"

            $rowCount = $DataTable.Rows.Count
            if ($rowCount -eq 0) {
                $rowCount = 1
            }

            if ($Pscmdlet.ShouldProcess($SqlInstance, "Writing $rowCount rows to $Fqtn")) {
                $bulkCopy.WriteToServer($DataTable)
                if ($rowCount -is [int]) {
                    Write-Progress -id 1 -activity "Inserting $rowCount rows" -status "Complete" -Completed
                }
            }
        }

        function New-Table {
            <#
            .SYNOPSIS
                Creates a table, based upon a DataTable.

            .DESCRIPTION
                Creates a table, based upon a DataTable.

            .PARAMETER DataTable
                The DataTable to base the table structure upon.

            .PARAMETER PStoSQLTypes
                Automatically inherits from parent.

            .PARAMETER SqlInstance
                Automatically inherits from parent.

            .PARAMETER Fqtn
                Automatically inherits from parent.

            .PARAMETER Server
                Automatically inherits from parent.

            .PARAMETER DatabaseName
                Automatically inherits from parent.

            .PARAMETER EnableException
                By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
                This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
                Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

            .PARAMETER UseDynamicStringLength
                Automatically inherits from parent.
        #>
            [CmdletBinding(SupportsShouldProcess)]
            param (
                $DataTable,
                $PStoSQLTypes = $PStoSQLTypes,
                $SqlInstance = $SqlInstance,
                $Fqtn = $fqtn,
                $Server = $server,
                $DatabaseName = $databaseName,
                [switch]$EnableException
            )

            Write-Message -Level Verbose -Message "Creating table for $fqtn"

            # Get SQL datatypes by best guess on first data row
            $sqlDataTypes = @();
            $columns = $DataTable.Columns

            if ($null -eq $columns) {
                $columns = $DataTable.Table.Columns
            }

            foreach ($column in $columns) {
                $sqlColumnName = $column.ColumnName

                try {
                    $columnValue = $DataTable.Rows[0].$sqlColumnName
                } catch {
                    $columnValue = $DataTable.$sqlColumnName
                }

                if ($null -eq $columnValue) {
                    $columnValue = $DataTable.$sqlColumnName
                }

                <#
                PS to SQL type conversion
                If data type exists in hash table, use the corresponding SQL type
                Else, fallback to nvarchar.
                If UseDynamicStringLength is specified, the DataColumn MaxLength is used if specified
            #>
                if ($PStoSQLTypes.Keys -contains $column.DataType) {
                    $sqlDataType = $PStoSQLTypes[$($column.DataType.toString())]
                    if ($UseDynamicStringLength -and $column.MaxLength -gt 0 -and ($column.DataType -in ("String", "System.String"))) {
                        $sqlDataType = $sqlDataType.Replace("(MAX)", "($($column.MaxLength))")
                    }
                } else {
                    $sqlDataType = "nvarchar(MAX)"
                }

                $sqlDataTypes += "[$sqlColumnName] $sqlDataType"
            }

            $sql = "BEGIN CREATE TABLE $fqtn ($($sqlDataTypes -join ' NULL,')) END"

            Write-Message -Level Debug -Message $sql

            if ($Pscmdlet.ShouldProcess($SqlInstance, "Creating table $Fqtn")) {
                try {
                    $null = $Server.Databases[$DatabaseName].Query($sql)
                } catch {
                    Stop-Function -Message "The following query failed: $sql" -ErrorRecord $_
                    return
                }
            }
        }

        #endregion Utility Functions

        #region Prepare type for bulk copy
        if (-not $Truncate) { $ConfirmPreference = "None" }

        # Getting the total rows copied is a challenge. Use SqlBulkCopyExtension.
        # http://stackoverflow.com/questions/1188384/sqlbulkcopy-row-count-when-complete

        $sourcecode = 'namespace System.Data.SqlClient {
            using Reflection;

            public static class SqlBulkCopyExtension
            {
                const String _rowsCopiedFieldName = "_rowsCopied";
                static FieldInfo _rowsCopiedField = null;

                public static int RowsCopiedCount(this SqlBulkCopy bulkCopy)
                {
                    if (_rowsCopiedField == null) _rowsCopiedField = typeof(SqlBulkCopy).GetField(_rowsCopiedFieldName, BindingFlags.NonPublic | BindingFlags.GetField | BindingFlags.Instance);
                    return (int)_rowsCopiedField.GetValue(bulkCopy);
                }
            }
        }'
        # Load the basics
        if (-not $script:core) {
            try {
                Add-Type -ReferencedAssemblies System.Data.dll -TypeDefinition $sourcecode -ErrorAction Stop
            } catch {
                $null = 1
            }
        }
        #endregion Prepare type for bulk copy

        #region Resolve Full Qualified Table Name
        $fqtnObj = Get-TableNameParts $Table

        if ($fqtnObj.$parsed) {
            Stop-Function -Message "Unable to parse $($fqtnObj.InputValue) as a valid tablename."
            return
        }

        if ($null -eq $fqtnObj.Database -and $null -eq $Database) {
            Stop-Function -Message "You must specify a database or fully qualified table name."
            return
        }

        if (Test-Bound -ParameterName Database) {
            if ($null -eq $fqtnObj.Database) {
                $databaseName = "$Database"
            } else {
                if ($fqtnObj.Database -eq $Database) {
                    $databaseName = "$Database"
                } else {
                    Stop-Function -Message "The database parameter $($Database) differs from value from the fully qualified table name $($fqtnObj.Database)."
                    return
                }
            }
        } else {
            $databaseName = $fqtnObj.Database
        }

        if ($fqtnObj.Schema) {
            $schemaName = $fqtnObj.Schema
        } else {
            $schemaName = $Schema
        }

        $tableName = $fqtnObj.Table

        $quotedFQTN = New-Object System.Text.StringBuilder

        [void]$quotedFQTN.Append( '[' )
        if ($databaseName.Contains(']')) {
            [void]$quotedFQTN.Append( $databaseName.Replace(']', ']]') )
        } else {
            [void]$quotedFQTN.Append( $databaseName )
        }
        [void]$quotedFQTN.Append( '].' )

        [void]$quotedFQTN.Append( '[' )
        if ($schemaName.Contains(']')) {
            [void]$quotedFQTN.Append( $schemaName.Replace(']', ']]') )
        } else {
            [void]$quotedFQTN.Append( $schemaName )
        }
        [void]$quotedFQTN.Append( '].' )

        [void]$quotedFQTN.Append( '[' )
        if ($tableName.Contains(']')) {
            [void]$quotedFQTN.Append( $tableName.Replace(']', ']]') )
        } else {
            [void]$quotedFQTN.Append( $tableName )
        }
        [void]$quotedFQTN.Append( ']' )

        $fqtn = $quotedFQTN.ToString()
        Write-Message -Level SomewhatVerbose -Message "FQTN processed: $fqtn"
        #endregion Resolve Full Qualified Table Name

        #region Connect to server and get database
        try {
            $server = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential
        } catch {
            Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $SqlInstance
            return
        }

        if ($server.ServerType -eq 'SqlAzureDatabase') {
            <#
                For some reasons SMO wants an initial pull when talking to Azure Sql DB
                This will throw and be caught, and then we can continue as normal.
            #>
            try {
                $null = $server.Databases
            } catch {
                # here to avoid an empty catch
                $null = 1
            }
        }
        $databaseObject = $server.Databases[$databaseName]
        #endregion Connect to server and get database

        #region Prepare database and bulk operations
        if ($null -eq $databaseObject) {
            Stop-Function -Message "$databaseName does not exist." -Target $SqlInstance
            return
        }

        $databaseObject.Tables.Refresh()
        if ($schemaName -notin $databaseObject.Schemas.Name) {
            Stop-Function -Message "Schema does not exist."
            return
        }

        $tableExists = ($tableName -in $databaseObject.Tables.Name) -and ($databaseObject.Tables.Schema -eq $schemaName)

        if ((-not $tableExists) -and (-not $AutoCreateTable)) {
            Stop-Function -Message "Table does not exist and automatic creation of the table has not been selected. Specify the '-AutoCreateTable'-parameter to generate a suitable table."
            return
        }

        $bulkCopyOptions = 0
        $options = "TableLock", "CheckConstraints", "FireTriggers", "KeepIdentity", "KeepNulls", "Default"

        foreach ($option in $options) {
            $optionValue = Get-Variable $option -ValueOnly -ErrorAction SilentlyContinue
            if ($option -eq "TableLock" -and (!$NoTableLock)) {
                $optionValue = $true
            }
            if ($optionValue -eq $true) {
                $bulkCopyOptions += $([Data.SqlClient.SqlBulkCopyOptions]::$option).value__
            }
        }

        if ($Truncate -eq $true) {
            if ($Pscmdlet.ShouldProcess($SqlInstance, "Truncating $fqtn")) {
                try {
                    Write-Message -Level Output -Message "Truncating $fqtn."
                    $null = $server.Databases[$databaseName].Query("TRUNCATE TABLE $fqtn")
                } catch {
                    Write-Message -Level Warning -Message "Could not truncate $fqtn. Table may not exist or may have key constraints." -ErrorRecord $_
                }
            }
        }

        $bulkCopy = New-Object Data.SqlClient.SqlBulkCopy("$($server.ConnectionContext.ConnectionString);Database=$databaseName", $bulkCopyOptions)
        $bulkCopy.DestinationTableName = $fqtn
        $bulkCopy.BatchSize = $BatchSize
        $bulkCopy.NotifyAfter = $NotifyAfter
        $bulkCopy.BulkCopyTimeOut = $BulkCopyTimeOut

        $elapsed = [System.Diagnostics.Stopwatch]::StartNew()
        # Add RowCount output
        $bulkCopy.Add_SqlRowsCopied( {
                $script:totalRows = $args[1].RowsCopied
                $percent = [int](($script:totalRows / $rowCount) * 100)
                $timeTaken = [math]::Round($elapsed.Elapsed.TotalSeconds, 1)
                Write-Progress -id 1 -activity "Inserting $rowCount rows." -PercentComplete $percent -Status ([System.String]::Format("Progress: {0} rows ({1}%) in {2} seconds", $script:totalRows, $percent, $timeTaken))
            })

        $PStoSQLTypes = @{
            #PS datatype      = SQL data type
            'System.Int32'    = 'int';
            'System.UInt32'   = 'bigint';
            'System.Int16'    = 'smallint';
            'System.UInt16'   = 'int';
            'System.Int64'    = 'bigint';
            'System.UInt64'   = 'decimal(20,0)';
            'System.Decimal'  = 'decimal(38,5)';
            'System.Single'   = 'bigint';
            'System.Double'   = 'float';
            'System.Byte'     = 'tinyint';
            'System.SByte'    = 'smallint';
            'System.TimeSpan' = 'nvarchar(30)';
            'System.String'   = 'nvarchar(MAX)';
            'System.Char'     = 'nvarchar(1)'
            'System.DateTime' = 'datetime2';
            'System.Boolean'  = 'bit';
            'System.Guid'     = 'uniqueidentifier';
            'Int32'           = 'int';
            'UInt32'          = 'bigint';
            'Int16'           = 'smallint';
            'UInt16'          = 'int';
            'Int64'           = 'bigint';
            'UInt64'          = 'decimal(20,0)';
            'Decimal'         = 'decimal(38,5)';
            'Single'          = 'bigint';
            'Double'          = 'float';
            'Byte'            = 'tinyint';
            'SByte'           = 'smallint';
            'TimeSpan'        = 'nvarchar(30)';
            'String'          = 'nvarchar(MAX)';
            'Char'            = 'nvarchar(1)'
            'DateTime'        = 'datetime2';
            'Boolean'         = 'bit';
            'Bool'            = 'bit';
            'Guid'            = 'uniqueidentifier';
            'int'             = 'int';
            'long'            = 'bigint';
        }

        $validTypes = @([System.Data.DataSet], [System.Data.DataTable], [System.Data.DataRow], [System.Data.DataRow[]])
        #endregion Prepare database and bulk operations

        #region ConvertTo-DbaDataTable wrapper
        try {
            $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand('ConvertTo-DbaDataTable', [System.Management.Automation.CommandTypes]::Function)
            $splatCDDT = @{
                TimeSpanType = (Get-DbatoolsConfigValue -FullName 'commands.write-dbadatatable.timespantype' -Fallback 'TotalMilliseconds')
                SizeType     = (Get-DbatoolsConfigValue -FullName 'commands.write-dbadatatable.sizetype' -Fallback 'Int64')
                IgnoreNull   = (Get-DbatoolsConfigValue -FullName 'commands.write-dbadatatable.ignorenull' -Fallback $false)
                Raw          = (Get-DbatoolsConfigValue -FullName 'commands.write-dbadatatable.raw' -Fallback $false)
            }
            $scriptCmd = { & $wrappedCmd @splatCDDT }
            $steppablePipeline = $scriptCmd.GetSteppablePipeline()
            $steppablePipeline.Begin($true)
        } catch {
            Stop-Function -Message "Failed to initialize "
        }
        #endregion ConvertTo-DbaDataTable wrapper
    }
    process {
        if (Test-FunctionInterrupt) { return }

        if ($null -ne $InputObject) { $inputType = $InputObject.GetType() }
        else { $inputType = $null }

        if ($inputType -eq [System.Data.DataSet]) {
            $inputData = $InputObject.Tables
            $inputType = [System.Data.DataTable[]]
        } else {
            $inputData = $InputObject
        }

        #region Scenario 1: Single valid table
        if ($inputType -in $validTypes) {
            if (-not $tableExists) {
                try {
                    New-Table -DataTable $InputObject -EnableException
                    $tableExists = $true
                } catch {
                    Stop-Function -Message "Failed to create table $fqtn" -ErrorRecord $_ -Target $SqlInstance
                    return
                }
            }

            try { Invoke-BulkCopy -DataTable $InputObject }
            catch {
                Stop-Function -Message "Failed to bulk import to $fqtn" -ErrorRecord $_ -Target $SqlInstance
            }
            return
        }
        #endregion Scenario 1: Single valid table

        foreach ($object in $inputData) {
            #region Scenario 2: Multiple valid tables
            if ($object.GetType() -in $validTypes) {
                if (-not $tableExists) {
                    try {
                        New-Table -DataTable $object -EnableException
                        $tableExists = $true
                    } catch {
                        Stop-Function -Message "Failed to create table $fqtn" -ErrorRecord $_ -Target $SqlInstance
                        return
                    }
                }

                try { Invoke-BulkCopy -DataTable $object }
                catch {
                    Stop-Function -Message "Failed to bulk import to $fqtn" -ErrorRecord $_ -Target $SqlInstance -Continue
                }
                continue
            }
            #endregion Scenario 2: Multiple valid tables

            #region Scenario 3: Invalid data types
            else {
                $null = $steppablePipeline.Process($object)
                continue
            }
            #endregion Scenario 3: Invalid data types
        }
    }
    end {
        #region ConvertTo-DbaDataTable wrapper
        if ($null -ne $steppablePipeline) {
            $dataTable = $steppablePipeline.End()

            if (-not $tableExists) {
                try {
                    New-Table -DataTable $dataTable[0] -EnableException
                    $tableExists = $true
                } catch {
                    Stop-Function -Message "Failed to create table $fqtn" -ErrorRecord $_ -Target $SqlInstance
                    return
                }
            }

            try { Invoke-BulkCopy -DataTable $dataTable[0] }
            catch {
                Stop-Function -Message "Failed to bulk import to $fqtn" -ErrorRecord $_ -Target $SqlInstance
            }
        }
        #endregion ConvertTo-DbaDataTable wrapper

        if ($bulkCopy) {
            $bulkCopy.Close()
            $bulkCopy.Dispose()
        }
        Test-DbaDeprecation -DeprecatedOn 1.0.0 -Parameter RegularUser
    }
}

tools\dbatools\install.ps1

[CmdletBinding()]
param (
    [string]$Path,
    [switch]$Beta
)

function Write-LocalMessage {
    [CmdletBinding()]
    param (
        [string]$Message
    )

    if (Test-Path function:Write-Message) { Write-Message -Level Output -Message $Message }
    else { Write-Host $Message }
}

try {
    Update-Module dbatools -Erroraction Stop
    Write-LocalMessage -Message "Updated using the PowerShell Gallery"
    return
} catch {
    Write-LocalMessage -Message "dbatools was not installed by the PowerShell Gallery, continuing with web install."
}

$currentVersionTls = [Net.ServicePointManager]::SecurityProtocol
$currentSupportableTls = [Math]::Max($currentVersionTls.value__, [Net.SecurityProtocolType]::Tls.value__)
$availableTls = [enum]::GetValues('Net.SecurityProtocolType') | Where-Object {
    $_ -gt $currentSupportableTls
}
$availableTls | ForEach-Object {
    [Net.ServicePointManager]::SecurityProtocol = [Net.ServicePointManager]::SecurityProtocol -bor $_
}

$dbatools_copydllmode = $true
$module = Import-Module -Name dbatools -ErrorAction SilentlyContinue
$localpath = $module.ModuleBase

if ($null -eq $localpath) {
    $localpath = "$HOME\Documents\WindowsPowerShell\Modules\dbatools"
} else {
    Write-LocalMessage -Message "Updating current install"
}

try {
    if (-not $path) {
        if ($PSCommandPath.Length -gt 0) {
            $path = Split-Path $PSCommandPath
            if ($path -match "github") {
                Write-LocalMessage -Message "Looks like this installer is run from your GitHub Repo, defaulting to psmodulepath"
                $path = $localpath
            }
        } else {
            $path = $localpath
        }
    }
} catch {
    $path = $localpath
}

if (-not $path -or (Test-Path -Path "$path\.git")) {
    $path = $localpath
}

If ($lib = [appdomain]::CurrentDomain.GetAssemblies() | Where-Object FullName -like "dbatools, *") {
    if ($lib.Location -like "$Path\*") {
        Write-LocalMessage @"
We have detected dbatools to be already imported from
$path
In a manner that prevents us from updating it, since dll files have been locked.
In order to ensure a valid update, please:
- Close all consoles that have dbatools imported (Remove-Module dbatools is NOT enough)
- Start a new PowerShell console
- Run '`$dbatools_copydllmode = `$true' (without the single-quotes)
- Import dbatools and run Update-Dbatools
If done in this order, the binaries will be copied to another location before import, allowing for a save update.
"@
        return
    }
}

Write-LocalMessage -Message "Installing module to $path"

if (!(Test-Path -Path $path)) {
    try {
        Write-LocalMessage -Message "Creating directory: $path"
        New-Item -Path $path -ItemType Directory | Out-Null
    } catch {
        throw "Can't create $Path. You may need to Run as Administrator: $_"
    }
}

if ($beta) {
    $url = 'https://dbatools.io/devzip'
    $branch = "development"
} else {
    $url = 'https://dbatools.io/zip'
    $branch = "master"
}

$temp = ([System.IO.Path]::GetTempPath()).TrimEnd("\")
$zipfile = "$temp\dbatools.zip"

Write-LocalMessage -Message "Downloading archive from github"
try {
    (New-Object System.Net.WebClient).DownloadFile($url, $zipfile)
} catch {
    try {
        #try with default proxy and usersettings
        Write-LocalMessage -Message "Probably using a proxy for internet access, trying default proxy settings"
        $wc = (New-Object System.Net.WebClient)
        $wc.Proxy.Credentials = [System.Net.CredentialCache]::DefaultNetworkCredentials
        $wc.DownloadFile($url, $zipfile)
    } catch {
        Write-Warning "Error downloading file :( $_"
        return
    }
}

# Unblock if there's a block
Unblock-File $zipfile -ErrorAction SilentlyContinue

Write-LocalMessage -Message "Unzipping"

# Keep it backwards compatible
Remove-Item -ErrorAction SilentlyContinue "$temp\dbatools-$branch" -Recurse -Force
Remove-Item -ErrorAction SilentlyContinue "$temp\dbatools-old" -Recurse -Force
$null = New-Item "$temp\dbatools-old" -ItemType Directory
$shell = New-Object -ComObject Shell.Application
$zipPackage = $shell.NameSpace($zipfile)
$destinationFolder = $shell.NameSpace($temp)
$destinationFolder.CopyHere($zipPackage.Items())

Write-LocalMessage -Message "Applying Update"
Write-LocalMessage -Message "1) Backing up previous installation"
Copy-Item -Path "$Path\*" -Destination "$temp\dbatools-old" -ErrorAction Stop
try {
    Write-LocalMessage -Message "2) Cleaning up installation directory"
    Remove-Item "$Path\*" -Recurse -Force -ErrorAction Stop
} catch {
    Write-LocalMessage -Message @"
Failed to clean up installation directory, rolling back update.
This usually has one of two causes:
- Insufficient privileges (need to run as admin)
- A file is locked - generally a dll file from having the module imported in some process.

You can run the following line before importing dbatools to prevent file locking:
`$dbatools_copydllmode = `$true
But it increases the time needed to import the module, so we only recommend using it for updates.

Exception:
$_
"@
    Copy-Item -Path "$temp\dbatools-old\*" -Destination $path -ErrorAction Ignore -Recurse
    Remove-Item "$temp\dbatools-old" -Recurse -Force
    return
}
Write-LocalMessage -Message "3) Setting up current version"
Move-Item -Path "$temp\dbatools-$branch\*" -Destination $path -ErrorAction SilentlyContinue -Force
Remove-Item -Path "$temp\dbatools-$branch" -Recurse -Force
Remove-Item "$temp\dbatools-old" -Recurse -Force
Remove-Item -Path $zipfile -Recurse -Force

Write-LocalMessage -Message "Done! Please report any bugs to dbatools.io/issues or [email protected]."
if (Get-Module dbatools) {
    Write-LocalMessage -Message @"

Please restart PowerShell before working with dbatools.
"@
} else {
    Import-Module "$path\dbatools.psd1" -Force
    Write-LocalMessage @"

dbatools v $((Get-Module dbatools).Version)
# Commands available: $((Get-Command -Module dbatools -CommandType Function | Measure-Object).Count)

"@
}
[Net.ServicePointManager]::SecurityProtocol = $currentVersionTls
Write-LocalMessage -Message "`n`nIf you experience any function missing errors after update, please restart PowerShell or reload your profile."
# SIG # Begin signature block
# MIIcYgYJKoZIhvcNAQcCoIIcUzCCHE8CAQExCzAJBgUrDgMCGgUAMGkGCisGAQQB
# gjcCAQSgWzBZMDQGCisGAQQBgjcCAR4wJgIDAQAABBAfzDtgWUsITrck0sYpfvNR
# AgEAAgEAAgEAAgEAAgEAMCEwCQYFKw4DAhoFAAQUBX7xyD/g2AIoCKG+yQp8AF7/
# +GuggheRMIIFGjCCBAKgAwIBAgIQAsF1KHTVwoQxhSrYoGRpyjANBgkqhkiG9w0B
# AQsFADByMQswCQYDVQQGEwJVUzEVMBMGA1UEChMMRGlnaUNlcnQgSW5jMRkwFwYD
# VQQLExB3d3cuZGlnaWNlcnQuY29tMTEwLwYDVQQDEyhEaWdpQ2VydCBTSEEyIEFz
# c3VyZWQgSUQgQ29kZSBTaWduaW5nIENBMB4XDTE3MDUwOTAwMDAwMFoXDTIwMDUx
# MzEyMDAwMFowVzELMAkGA1UEBhMCVVMxETAPBgNVBAgTCFZpcmdpbmlhMQ8wDQYD
# VQQHEwZWaWVubmExETAPBgNVBAoTCGRiYXRvb2xzMREwDwYDVQQDEwhkYmF0b29s
# czCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAI8ng7JxnekL0AO4qQgt
# Kr6p3q3SNOPh+SUZH+SyY8EA2I3wR7BMoT7rnZNolTwGjUXn7bRC6vISWg16N202
# 1RBWdTGW2rVPBVLF4HA46jle4hcpEVquXdj3yGYa99ko1w2FOWzLjKvtLqj4tzOh
# K7wa/Gbmv0Si/FU6oOmctzYMI0QXtEG7lR1HsJT5kywwmgcjyuiN28iBIhT6man0
# Ib6xKDv40PblKq5c9AFVldXUGVeBJbLhcEAA1nSPSLGdc7j4J2SulGISYY7ocuX3
# tkv01te72Mv2KkqqpfkLEAQjXgtM0hlgwuc8/A4if+I0YtboCMkVQuwBpbR9/6ys
# Z+sCAwEAAaOCAcUwggHBMB8GA1UdIwQYMBaAFFrEuXsqCqOl6nEDwGD5LfZldQ5Y
# MB0GA1UdDgQWBBRcxSkFqeA3vvHU0aq2mVpFRSOdmjAOBgNVHQ8BAf8EBAMCB4Aw
# EwYDVR0lBAwwCgYIKwYBBQUHAwMwdwYDVR0fBHAwbjA1oDOgMYYvaHR0cDovL2Ny
# bDMuZGlnaWNlcnQuY29tL3NoYTItYXNzdXJlZC1jcy1nMS5jcmwwNaAzoDGGL2h0
# dHA6Ly9jcmw0LmRpZ2ljZXJ0LmNvbS9zaGEyLWFzc3VyZWQtY3MtZzEuY3JsMEwG
# A1UdIARFMEMwNwYJYIZIAYb9bAMBMCowKAYIKwYBBQUHAgEWHGh0dHBzOi8vd3d3
# LmRpZ2ljZXJ0LmNvbS9DUFMwCAYGZ4EMAQQBMIGEBggrBgEFBQcBAQR4MHYwJAYI
# KwYBBQUHMAGGGGh0dHA6Ly9vY3NwLmRpZ2ljZXJ0LmNvbTBOBggrBgEFBQcwAoZC
# aHR0cDovL2NhY2VydHMuZGlnaWNlcnQuY29tL0RpZ2lDZXJ0U0hBMkFzc3VyZWRJ
# RENvZGVTaWduaW5nQ0EuY3J0MAwGA1UdEwEB/wQCMAAwDQYJKoZIhvcNAQELBQAD
# ggEBANuBGTbzCRhgG0Th09J0m/qDqohWMx6ZOFKhMoKl8f/l6IwyDrkG48JBkWOA
# QYXNAzvp3Ro7aGCNJKRAOcIjNKYef/PFRfFQvMe07nQIj78G8x0q44ZpOVCp9uVj
# sLmIvsmF1dcYhOWs9BOG/Zp9augJUtlYpo4JW+iuZHCqjhKzIc74rEEiZd0hSm8M
# asshvBUSB9e8do/7RhaKezvlciDaFBQvg5s0fICsEhULBRhoyVOiUKUcemprPiTD
# xh3buBLuN0bBayjWmOMlkG1Z6i8DUvWlPGz9jiBT3ONBqxXfghXLL6n8PhfppBhn
# daPQO8+SqF5rqrlyBPmRRaTz2GQwggUwMIIEGKADAgECAhAECRgbX9W7ZnVTQ7Vv
# lVAIMA0GCSqGSIb3DQEBCwUAMGUxCzAJBgNVBAYTAlVTMRUwEwYDVQQKEwxEaWdp
# Q2VydCBJbmMxGTAXBgNVBAsTEHd3dy5kaWdpY2VydC5jb20xJDAiBgNVBAMTG0Rp
# Z2lDZXJ0IEFzc3VyZWQgSUQgUm9vdCBDQTAeFw0xMzEwMjIxMjAwMDBaFw0yODEw
# MjIxMjAwMDBaMHIxCzAJBgNVBAYTAlVTMRUwEwYDVQQKEwxEaWdpQ2VydCBJbmMx
# GTAXBgNVBAsTEHd3dy5kaWdpY2VydC5jb20xMTAvBgNVBAMTKERpZ2lDZXJ0IFNI
# QTIgQXNzdXJlZCBJRCBDb2RlIFNpZ25pbmcgQ0EwggEiMA0GCSqGSIb3DQEBAQUA
# A4IBDwAwggEKAoIBAQD407Mcfw4Rr2d3B9MLMUkZz9D7RZmxOttE9X/lqJ3bMtdx
# 6nadBS63j/qSQ8Cl+YnUNxnXtqrwnIal2CWsDnkoOn7p0WfTxvspJ8fTeyOU5JEj
# lpB3gvmhhCNmElQzUHSxKCa7JGnCwlLyFGeKiUXULaGj6YgsIJWuHEqHCN8M9eJN
# YBi+qsSyrnAxZjNxPqxwoqvOf+l8y5Kh5TsxHM/q8grkV7tKtel05iv+bMt+dDk2
# DZDv5LVOpKnqagqrhPOsZ061xPeM0SAlI+sIZD5SlsHyDxL0xY4PwaLoLFH3c7y9
# hbFig3NBggfkOItqcyDQD2RzPJ6fpjOp/RnfJZPRAgMBAAGjggHNMIIByTASBgNV
# HRMBAf8ECDAGAQH/AgEAMA4GA1UdDwEB/wQEAwIBhjATBgNVHSUEDDAKBggrBgEF
# BQcDAzB5BggrBgEFBQcBAQRtMGswJAYIKwYBBQUHMAGGGGh0dHA6Ly9vY3NwLmRp
# Z2ljZXJ0LmNvbTBDBggrBgEFBQcwAoY3aHR0cDovL2NhY2VydHMuZGlnaWNlcnQu
# Y29tL0RpZ2lDZXJ0QXNzdXJlZElEUm9vdENBLmNydDCBgQYDVR0fBHoweDA6oDig
# NoY0aHR0cDovL2NybDQuZGlnaWNlcnQuY29tL0RpZ2lDZXJ0QXNzdXJlZElEUm9v
# dENBLmNybDA6oDigNoY0aHR0cDovL2NybDMuZGlnaWNlcnQuY29tL0RpZ2lDZXJ0
# QXNzdXJlZElEUm9vdENBLmNybDBPBgNVHSAESDBGMDgGCmCGSAGG/WwAAgQwKjAo
# BggrBgEFBQcCARYcaHR0cHM6Ly93d3cuZGlnaWNlcnQuY29tL0NQUzAKBghghkgB
# hv1sAzAdBgNVHQ4EFgQUWsS5eyoKo6XqcQPAYPkt9mV1DlgwHwYDVR0jBBgwFoAU
# Reuir/SSy4IxLVGLp6chnfNtyA8wDQYJKoZIhvcNAQELBQADggEBAD7sDVoks/Mi
# 0RXILHwlKXaoHV0cLToaxO8wYdd+C2D9wz0PxK+L/e8q3yBVN7Dh9tGSdQ9RtG6l
# jlriXiSBThCk7j9xjmMOE0ut119EefM2FAaK95xGTlz/kLEbBw6RFfu6r7VRwo0k
# riTGxycqoSkoGjpxKAI8LpGjwCUR4pwUR6F6aGivm6dcIFzZcbEMj7uo+MUSaJ/P
# QMtARKUT8OZkDCUIQjKyNookAv4vcn4c10lFluhZHen6dGRrsutmQ9qzsIzV6Q3d
# 9gEgzpkxYz0IGhizgZtPxpMQBvwHgfqL2vmCSfdibqFT+hKUGIUukpHqaGxEMrJm
# oecYpJpkUe8wggZqMIIFUqADAgECAhADAZoCOv9YsWvW1ermF/BmMA0GCSqGSIb3
# DQEBBQUAMGIxCzAJBgNVBAYTAlVTMRUwEwYDVQQKEwxEaWdpQ2VydCBJbmMxGTAX
# BgNVBAsTEHd3dy5kaWdpY2VydC5jb20xITAfBgNVBAMTGERpZ2lDZXJ0IEFzc3Vy
# ZWQgSUQgQ0EtMTAeFw0xNDEwMjIwMDAwMDBaFw0yNDEwMjIwMDAwMDBaMEcxCzAJ
# BgNVBAYTAlVTMREwDwYDVQQKEwhEaWdpQ2VydDElMCMGA1UEAxMcRGlnaUNlcnQg
# VGltZXN0YW1wIFJlc3BvbmRlcjCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoC
# ggEBAKNkXfx8s+CCNeDg9sYq5kl1O8xu4FOpnx9kWeZ8a39rjJ1V+JLjntVaY1sC
# SVDZg85vZu7dy4XpX6X51Id0iEQ7Gcnl9ZGfxhQ5rCTqqEsskYnMXij0ZLZQt/US
# s3OWCmejvmGfrvP9Enh1DqZbFP1FI46GRFV9GIYFjFWHeUhG98oOjafeTl/iqLYt
# WQJhiGFyGGi5uHzu5uc0LzF3gTAfuzYBje8n4/ea8EwxZI3j6/oZh6h+z+yMDDZb
# esF6uHjHyQYuRhDIjegEYNu8c3T6Ttj+qkDxss5wRoPp2kChWTrZFQlXmVYwk/PJ
# YczQCMxr7GJCkawCwO+k8IkRj3cCAwEAAaOCAzUwggMxMA4GA1UdDwEB/wQEAwIH
# gDAMBgNVHRMBAf8EAjAAMBYGA1UdJQEB/wQMMAoGCCsGAQUFBwMIMIIBvwYDVR0g
# BIIBtjCCAbIwggGhBglghkgBhv1sBwEwggGSMCgGCCsGAQUFBwIBFhxodHRwczov
# L3d3dy5kaWdpY2VydC5jb20vQ1BTMIIBZAYIKwYBBQUHAgIwggFWHoIBUgBBAG4A
# eQAgAHUAcwBlACAAbwBmACAAdABoAGkAcwAgAEMAZQByAHQAaQBmAGkAYwBhAHQA
# ZQAgAGMAbwBuAHMAdABpAHQAdQB0AGUAcwAgAGEAYwBjAGUAcAB0AGEAbgBjAGUA
# IABvAGYAIAB0AGgAZQAgAEQAaQBnAGkAQwBlAHIAdAAgAEMAUAAvAEMAUABTACAA
# YQBuAGQAIAB0AGgAZQAgAFIAZQBsAHkAaQBuAGcAIABQAGEAcgB0AHkAIABBAGcA
# cgBlAGUAbQBlAG4AdAAgAHcAaABpAGMAaAAgAGwAaQBtAGkAdAAgAGwAaQBhAGIA
# aQBsAGkAdAB5ACAAYQBuAGQAIABhAHIAZQAgAGkAbgBjAG8AcgBwAG8AcgBhAHQA
# ZQBkACAAaABlAHIAZQBpAG4AIABiAHkAIAByAGUAZgBlAHIAZQBuAGMAZQAuMAsG
# CWCGSAGG/WwDFTAfBgNVHSMEGDAWgBQVABIrE5iymQftHt+ivlcNK2cCzTAdBgNV
# HQ4EFgQUYVpNJLZJMp1KKnkag0v0HonByn0wfQYDVR0fBHYwdDA4oDagNIYyaHR0
# cDovL2NybDMuZGlnaWNlcnQuY29tL0RpZ2lDZXJ0QXNzdXJlZElEQ0EtMS5jcmww
# OKA2oDSGMmh0dHA6Ly9jcmw0LmRpZ2ljZXJ0LmNvbS9EaWdpQ2VydEFzc3VyZWRJ
# RENBLTEuY3JsMHcGCCsGAQUFBwEBBGswaTAkBggrBgEFBQcwAYYYaHR0cDovL29j
# c3AuZGlnaWNlcnQuY29tMEEGCCsGAQUFBzAChjVodHRwOi8vY2FjZXJ0cy5kaWdp
# Y2VydC5jb20vRGlnaUNlcnRBc3N1cmVkSURDQS0xLmNydDANBgkqhkiG9w0BAQUF
# AAOCAQEAnSV+GzNNsiaBXJuGziMgD4CH5Yj//7HUaiwx7ToXGXEXzakbvFoWOQCd
# 42yE5FpA+94GAYw3+puxnSR+/iCkV61bt5qwYCbqaVchXTQvH3Gwg5QZBWs1kBCg
# e5fH9j/n4hFBpr1i2fAnPTgdKG86Ugnw7HBi02JLsOBzppLA044x2C/jbRcTBu7k
# A7YUq/OPQ6dxnSHdFMoVXZJB2vkPgdGZdA0mxA5/G7X1oPHGdwYoFenYk+VVFvC7
# Cqsc21xIJ2bIo4sKHOWV2q7ELlmgYd3a822iYemKC23sEhi991VUQAOSK2vCUcIK
# SK+w1G7g9BQKOhvjjz3Kr2qNe9zYRDCCBs0wggW1oAMCAQICEAb9+QOWA63qAArr
# Pye7uhswDQYJKoZIhvcNAQEFBQAwZTELMAkGA1UEBhMCVVMxFTATBgNVBAoTDERp
# Z2lDZXJ0IEluYzEZMBcGA1UECxMQd3d3LmRpZ2ljZXJ0LmNvbTEkMCIGA1UEAxMb
# RGlnaUNlcnQgQXNzdXJlZCBJRCBSb290IENBMB4XDTA2MTExMDAwMDAwMFoXDTIx
# MTExMDAwMDAwMFowYjELMAkGA1UEBhMCVVMxFTATBgNVBAoTDERpZ2lDZXJ0IElu
# YzEZMBcGA1UECxMQd3d3LmRpZ2ljZXJ0LmNvbTEhMB8GA1UEAxMYRGlnaUNlcnQg
# QXNzdXJlZCBJRCBDQS0xMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEA
# 6IItmfnKwkKVpYBzQHDSnlZUXKnE0kEGj8kz/E1FkVyBn+0snPgWWd+etSQVwpi5
# tHdJ3InECtqvy15r7a2wcTHrzzpADEZNk+yLejYIA6sMNP4YSYL+x8cxSIB8HqIP
# kg5QycaH6zY/2DDD/6b3+6LNb3Mj/qxWBZDwMiEWicZwiPkFl32jx0PdAug7Pe2x
# QaPtP77blUjE7h6z8rwMK5nQxl0SQoHhg26Ccz8mSxSQrllmCsSNvtLOBq6thG9I
# hJtPQLnxTPKvmPv2zkBdXPao8S+v7Iki8msYZbHBc63X8djPHgp0XEK4aH631XcK
# J1Z8D2KkPzIUYJX9BwSiCQIDAQABo4IDejCCA3YwDgYDVR0PAQH/BAQDAgGGMDsG
# A1UdJQQ0MDIGCCsGAQUFBwMBBggrBgEFBQcDAgYIKwYBBQUHAwMGCCsGAQUFBwME
# BggrBgEFBQcDCDCCAdIGA1UdIASCAckwggHFMIIBtAYKYIZIAYb9bAABBDCCAaQw
# OgYIKwYBBQUHAgEWLmh0dHA6Ly93d3cuZGlnaWNlcnQuY29tL3NzbC1jcHMtcmVw
# b3NpdG9yeS5odG0wggFkBggrBgEFBQcCAjCCAVYeggFSAEEAbgB5ACAAdQBzAGUA
# IABvAGYAIAB0AGgAaQBzACAAQwBlAHIAdABpAGYAaQBjAGEAdABlACAAYwBvAG4A
# cwB0AGkAdAB1AHQAZQBzACAAYQBjAGMAZQBwAHQAYQBuAGMAZQAgAG8AZgAgAHQA
# aABlACAARABpAGcAaQBDAGUAcgB0ACAAQwBQAC8AQwBQAFMAIABhAG4AZAAgAHQA
# aABlACAAUgBlAGwAeQBpAG4AZwAgAFAAYQByAHQAeQAgAEEAZwByAGUAZQBtAGUA
# bgB0ACAAdwBoAGkAYwBoACAAbABpAG0AaQB0ACAAbABpAGEAYgBpAGwAaQB0AHkA
# IABhAG4AZAAgAGEAcgBlACAAaQBuAGMAbwByAHAAbwByAGEAdABlAGQAIABoAGUA
# cgBlAGkAbgAgAGIAeQAgAHIAZQBmAGUAcgBlAG4AYwBlAC4wCwYJYIZIAYb9bAMV
# MBIGA1UdEwEB/wQIMAYBAf8CAQAweQYIKwYBBQUHAQEEbTBrMCQGCCsGAQUFBzAB
# hhhodHRwOi8vb2NzcC5kaWdpY2VydC5jb20wQwYIKwYBBQUHMAKGN2h0dHA6Ly9j
# YWNlcnRzLmRpZ2ljZXJ0LmNvbS9EaWdpQ2VydEFzc3VyZWRJRFJvb3RDQS5jcnQw
# gYEGA1UdHwR6MHgwOqA4oDaGNGh0dHA6Ly9jcmwzLmRpZ2ljZXJ0LmNvbS9EaWdp
# Q2VydEFzc3VyZWRJRFJvb3RDQS5jcmwwOqA4oDaGNGh0dHA6Ly9jcmw0LmRpZ2lj
# ZXJ0LmNvbS9EaWdpQ2VydEFzc3VyZWRJRFJvb3RDQS5jcmwwHQYDVR0OBBYEFBUA
# EisTmLKZB+0e36K+Vw0rZwLNMB8GA1UdIwQYMBaAFEXroq/0ksuCMS1Ri6enIZ3z
# bcgPMA0GCSqGSIb3DQEBBQUAA4IBAQBGUD7Jtygkpzgdtlspr1LPUukxR6tWXHvV
# DQtBs+/sdR90OPKyXGGinJXDUOSCuSPRujqGcq04eKx1XRcXNHJHhZRW0eu7NoR3
# zCSl8wQZVann4+erYs37iy2QwsDStZS9Xk+xBdIOPRqpFFumhjFiqKgz5Js5p8T1
# zh14dpQlc+Qqq8+cdkvtX8JLFuRLcEwAiR78xXm8TBJX/l/hHrwCXaj++wc4Tw3G
# XZG5D2dFzdaD7eeSDY2xaYxP+1ngIw/Sqq4AfO6cQg7PkdcntxbuD8O9fAqg7iwI
# VYUiuOsYGk38KiGtSTGDR5V3cdyxG0tLHBCcdxTBnU8vWpUIKRAmMYIEOzCCBDcC
# AQEwgYYwcjELMAkGA1UEBhMCVVMxFTATBgNVBAoTDERpZ2lDZXJ0IEluYzEZMBcG
# A1UECxMQd3d3LmRpZ2ljZXJ0LmNvbTExMC8GA1UEAxMoRGlnaUNlcnQgU0hBMiBB
# c3N1cmVkIElEIENvZGUgU2lnbmluZyBDQQIQAsF1KHTVwoQxhSrYoGRpyjAJBgUr
# DgMCGgUAoHgwGAYKKwYBBAGCNwIBDDEKMAigAoAAoQKAADAZBgkqhkiG9w0BCQMx
# DAYKKwYBBAGCNwIBBDAcBgorBgEEAYI3AgELMQ4wDAYKKwYBBAGCNwIBFTAjBgkq
# hkiG9w0BCQQxFgQUJG2qmbkxMSfcmauDcSrIyGH89VYwDQYJKoZIhvcNAQEBBQAE
# ggEAEEMPAz1Jq4IhIzcxlG2P1bTEggImMGFtnHiZvhApxmu/cb9xxVLSSGhc/iql
# 2/FDM/HSjlxhFqNeY1y67ADhptftY94+Lng1hW8tPtq1RdFEgb1BOmQj6ZNEfPXl
# artCM9uA7uGv8t45I9TklFlljaOqD41gTpGqjPux9bJTPtQLhFXFddMEv9BqKTIX
# MWea5psrRM+pp8LqpYPty9pMomNRqiX86hKF4VhUNSkb7Dw4qNv1CvoeHV/OPok3
# kSgKlOgkY08eQE9/fdQebqvLMQbFvT2QH3ZdL2naqU+JfOb6yNX9YCdVNOasBvwc
# qbftY7bkvXjVavpitMcVqVwZPqGCAg8wggILBgkqhkiG9w0BCQYxggH8MIIB+AIB
# ATB2MGIxCzAJBgNVBAYTAlVTMRUwEwYDVQQKEwxEaWdpQ2VydCBJbmMxGTAXBgNV
# BAsTEHd3dy5kaWdpY2VydC5jb20xITAfBgNVBAMTGERpZ2lDZXJ0IEFzc3VyZWQg
# SUQgQ0EtMQIQAwGaAjr/WLFr1tXq5hfwZjAJBgUrDgMCGgUAoF0wGAYJKoZIhvcN
# AQkDMQsGCSqGSIb3DQEHATAcBgkqhkiG9w0BCQUxDxcNMTgxMjA3MTAzMzM1WjAj
# BgkqhkiG9w0BCQQxFgQU47h5ZKo0VO6Ks83Bq9vU3j1z9lIwDQYJKoZIhvcNAQEB
# BQAEggEATEgrXu+9At1o6kXiqWX3DsmSh+uxmcUrDrvgsX2HMQNqLqL+3ViRe1JX
# xD3+OS3+1xtbF9EYc/RNpnGCamS/Mq4Bi/oq8rkijgTYts1LrPsnHPzm9NYZW/ec
# LDmqDaEVUFC0teDpt1+sWIoxA9aFryVv572p8kPf4r+kbVIazG+obXSwYjCxe00F
# MNW1muVesBVrbeqkdTcYL88jSN6GrAl7C32VlfpA6Hjb/G+RGxo+QbSUm7J09NT0
# fu9GWSBLhJQxU67G++ldb9ETJAE2AGxFtZj8iYhcHiNCJ/D2SkLS0ton+3Mx48Km
# mytUaXmaDhW0p5Rs263OT/VKr4Qctg==
# SIG # End signature block

tools\dbatools\internal\configurations\configuration.ps1

<#

#-------------------------#
# Warning Warning Warning #
#-------------------------#

This is the global configuration management file.

DO NOT EDIT THIS FILE!!!!!
Disobedience shall be answered by the wrath of Fred.
You've been warned.
;)

The purpose of this file is to manage the configuration system.
That means, messing with this may mess with every function using this infrastructure.
Don't, unless you know what you do.

#---------------------------------------#
# Implementing the configuration system #
#---------------------------------------#

The configuration system is designed, to keep as much hard coded configuration out of the functions.
Instead we keep it in a central location: The Configuration store (= this folder).

In Order to put something here, either find a configuration file whose topic suits you and add configuration there,
or create your own file. The configuration system is loaded last during module import process, so you have access to all
that dbatools has to offer (Keep module load times in mind though).

Examples are better than a thousand words:

a) Setting the configuration value
# Put this in a configuration file in this folder
Set-DbatoolsConfig -Name 'Path.DbatoolsLog' -Value "$($env:AppData)\PowerShell\dbatools" -Initialize -Description "Sopmething meaningful here"

b) Retrieving the configuration value in your function
# Put this in the function that uses this setting
$path = Get-DbatoolsConfigValue -Name 'Path.DbatoolsLog' -FallBack $env:temp

# Explanation #
#-------------#

In step a), which is run during module import, we assign the configuration of the name 'Path.DbatoolsLog' the value "$($env:AppData)\PowerShell\dbatools"
Unless there already IS a value set to this name (that's what the '-Default' switch is doing).
That means, that if a user had a different configuration value in his profile, that value will win. Userchoice over preset.
ALL configurations defined by the module should be 'default' values.

In step b), which will be run whenever the function is called within which it is written, we retrieve the value stored behind the name 'Path.DbatoolsLog'.
If there is nothing there (for example, if the user accidentally removed or nulled the configuration), then it will fall back to using "$($env:temp)\dbatools.log"

#>

#region Paths
$script:path_RegistryUserDefault = "HKCU:\SOFTWARE\Microsoft\WindowsPowerShell\dbatools\Config\Default"
$script:path_RegistryUserEnforced = "HKCU:\SOFTWARE\Microsoft\WindowsPowerShell\dbatools\Config\Enforced"
$script:path_RegistryMachineDefault = "HKLM:\SOFTWARE\Microsoft\WindowsPowerShell\dbatools\Config\Default"
$script:path_RegistryMachineEnforced = "HKLM:\SOFTWARE\Microsoft\WindowsPowerShell\dbatools\Config\Enforced"
$psVersionName = "WindowsPowerShell"
if ($PSVersionTable.PSVersion.Major -ge 6) { $psVersionName = "PowerShell" }

#region User Local
if ($IsLinux -or $IsMacOs)
{
    # Defaults to $Env:XDG_CONFIG_HOME on Linux or MacOS ($HOME/.config/)
    $fileUserLocal = $Env:XDG_CONFIG_HOME
    if (-not $fileUserLocal) { $fileUserLocal = Join-Path $HOME .config/ }
    
    $script:path_FileUserLocal = Join-DbaPath $fileUserLocal $psVersionName "dbatools/"
}
else
{
    # Defaults to $Env:LocalAppData on Windows
    $script:path_FileUserLocal = Join-Path $Env:LocalAppData "$psVersionName\dbatools\Config"
    if (-not $script:path_FileUserLocal) { $script:path_FileUserLocal = Join-Path ([Environment]::GetFolderPath("LocalApplicationData")) "$psVersionName\dbatools\Config" }
}
#endregion User Local

#region User Shared
if ($IsLinux -or $IsMacOs)
{
    # Defaults to the first value in $Env:XDG_CONFIG_DIRS on Linux or MacOS (or $HOME/.local/share/)
    $fileUserShared = @($Env:XDG_CONFIG_DIRS -split ([IO.Path]::PathSeparator))[0]
    if (-not $fileUserShared) { $fileUserShared = Join-Path $HOME .local/share/ }
    
    $script:path_FileUserShared = Join-DbaPath $fileUserShared $psVersionName "dbatools/"
    $script:AppData = $fileUserShared
}
else
{
    # Defaults to $Env:AppData on Windows
    $script:path_FileUserShared = Join-DbaPath $Env:AppData $psVersionName "dbatools" "Config"
    $script:AppData = $Env:APPDATA
    if (-not $Env:AppData)
    {
        $script:path_FileUserShared = Join-DbaPath ([Environment]::GetFolderPath("ApplicationData")) $psVersionName "dbatools" "Config"
        $script:AppData = [Environment]::GetFolderPath("ApplicationData")
    }
}
#endregion User Shared

#region System
if ($IsLinux -or $IsMacOs)
{
    # Defaults to /etc/xdg elsewhere
    $XdgConfigDirs = $Env:XDG_CONFIG_DIRS -split ([IO.Path]::PathSeparator) | Where-Object { $_ -and (Test-Path $_) }
    if ($XdgConfigDirs.Count -gt 1) { $basePath = $XdgConfigDirs[1] }
    else { $basePath = "/etc/xdg/" }
    $script:path_FileSystem = Join-DbaPath $basePath $psVersionName "dbatools/"
}
else
{
    # Defaults to $Env:ProgramData on Windows
    $script:path_FileSystem = Join-DbaPath $Env:ProgramData $psVersionName "dbatools" "Config"
    if (-not $script:path_FileSystem) { $script:path_FileSystem = Join-DbaPath ([Environment]::GetFolderPath("CommonApplicationData")) $psVersionName "dbatools" "Config" }
}
#endregion System

#region Special Paths
# $script:AppData is already OS localized
$script:path_Logging = Join-DbaPath $script:AppData $psVersionName "dbatools" "Logs"
$script:path_typedata = Join-DbaPath $script:AppData $psVersionName "dbatools" "TypeData"
#endregion Special Paths
#endregion Paths

# Determine Registry Availability
$script:NoRegistry = $false
if (($PSVersionTable.PSVersion.Major -ge 6) -and ($PSVersionTable.OS -notlike "*Windows*"))
{
    $script:NoRegistry = $true
}

$configpath = Resolve-Path "$script:PSModuleRoot\internal\configurations"

# Import configuration validation
foreach ($file in (Get-ChildItem -Path (Resolve-Path "$configpath\validation")))
{
    if ($script:doDotSource) { . $file.FullName }
    else { . ([scriptblock]::Create([io.file]::ReadAllText($file.FullName))) }
}

# Import other configuration files
foreach ($file in (Get-ChildItem -Path (Resolve-Path "$configpath\settings")))
{
    if ($script:doDotSource) { . $file.FullName }
    else { . ([scriptblock]::Create([io.file]::ReadAllText($file.FullName))) }
}

if (-not [Sqlcollaborative.Dbatools.Configuration.ConfigurationHost]::ImportFromRegistryDone)
{
    # Read config from all settings
    $config_hash = Read-DbatoolsConfigPersisted -Scope 127
    
    foreach ($value in $config_hash.Values)
    {
        try
        {
            if (-not $value.KeepPersisted) { Set-DbatoolsConfig -FullName $value.FullName -Value $value.Value -EnableException }
            else { Set-DbatoolsConfig -FullName $value.FullName -PersistedValue $value.Value -PersistedType $value.Type -EnableException }
            [Sqlcollaborative.Dbatools.Configuration.ConfigurationHost]::Configurations[$value.FullName.ToLower()].PolicySet = $value.Policy
            [Sqlcollaborative.Dbatools.Configuration.ConfigurationHost]::Configurations[$value.FullName.ToLower()].PolicyEnforced = $value.Enforced
        }
        catch { }
    }
    
    if ($null -ne $global:dbatools_config)
    {
        if ($global:dbatools_config.GetType().FullName -eq "System.Management.Automation.ScriptBlock")
        {
            [System.Management.Automation.ScriptBlock]::Create($global:dbatools_config.ToString()).Invoke()
        }
    }
    
    [Sqlcollaborative.Dbatools.Configuration.ConfigurationHost]::ImportFromRegistryDone = $true
}

tools\dbatools\internal\dynamicparams\delimiter.ps1

#region Initialize Cache
if (-not [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["delimiter"]) {
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["delimiter"] = @{ }
}
#endregion Initialize Cache

#region Tepp Data return
$ScriptBlock = {
    param (
        $commandName,
        $parameterName,
        $wordToComplete,
        $commandAst,
        $fakeBoundParameter
    )

    @("``t", "|", ";", " ", ",", "       ")
}

Register-DbaTeppScriptblock -ScriptBlock $ScriptBlock -Name Delimiter
#endregion Tepp Data return

tools\dbatools\internal\configurations\settings\commands.ps1

# Write-DbaDataTable: Settings for ConvertTo-DbaDataTable
Set-DbatoolsConfig -FullName 'commands.write-dbadatatable.timespantype' -Value 'TotalMilliseconds' -Initialize -Validation string -Description "When passing random objects at Write-DbaDataTable, it will convert them to a DataTable before writing it, using ConvertTo-DbaDataTable. This setting controls how Timespan objects are converted"
Set-DbatoolsConfig -FullName 'commands.write-dbadatatable.sizetype' -Value 'Int64' -Initialize -Validation string -Description "When passing random objects at Write-DbaDataTable, it will convert them to a DataTable before writing it, using ConvertTo-DbaDataTable. This setting controls how Size objects are converted"
Set-DbatoolsConfig -FullName 'commands.write-dbadatatable.ignorenull' -Value $false -Initialize -Validation bool -Description "When passing random objects at Write-DbaDataTable, it will convert them to a DataTable before writing it, using ConvertTo-DbaDataTable. This setting controls whether null objects will be ignored, rather than generating an empty row"
Set-DbatoolsConfig -FullName 'commands.write-dbadatatable.raw' -Value $false -Initialize -Validation bool -Description "When passing random objects at Write-DbaDataTable, it will convert them to a DataTable before writing it, using ConvertTo-DbaDataTable. This setting controls whether all properties will be stored as string (`$true) or as much as possible in their native type (`$false)"

tools\dbatools\internal\configurations\settings\computermanagement.ps1

<#
This is designed for all things that control how anything that caches acts
#>

# Sets the default timeout on bad connections
Set-DbatoolsConfig -FullName 'ComputerManagement.BadConnectionTimeout' -Value (New-TimeSpan -Minutes 15) -Initialize -Validation timespan -Handler { [Sqlcollaborative.Dbatools.Connection.ConnectionHost]::BadConnectionTimeout = $args[0] } -Description 'The timeout used on bad computer management connections. When a connection using a protocol fails, it will not be reattempted for this timespan.'

# Disable the management cache entire
Set-DbatoolsConfig -FullName 'ComputerManagement.Cache.Disable.All' -Value $false -Initialize -Validation bool -Handler { [Sqlcollaborative.Dbatools.Connection.ConnectionHost]::DisableCache = $args[0] } -Description 'Globally disables all caching done by the Computer Management functions'

# Disables the caching of bad credentials, which is kept in order to avoid reusing them
Set-DbatoolsConfig -FullName 'ComputerManagement.Cache.Disable.BadCredentialList' -Value $false -Initialize -Validation bool -Handler { [Sqlcollaborative.Dbatools.Connection.ConnectionHost]::DisableBadCredentialCache = $args[0] } -Description 'Disables the caching of bad credentials. dbatools caches bad logon credentials for wmi/cim and will not reuse them.'

# Disables reuse of CIM Sessions
Set-DbatoolsConfig -FullName 'ComputerManagement.Cache.Disable.CimPersistence' -Value $false -Initialize -Validation bool -Handler { [Sqlcollaborative.Dbatools.Connection.ConnectionHost]::DisableCimPersistence = $args[0] } -Description 'Disables the reuse of Cim Sessions. Setting this config to "true" will hurt Computer Management Performance, but may be necessary in some rare cases'

# Disables automatic caching of working credentials
Set-DbatoolsConfig -FullName 'ComputerManagement.Cache.Disable.CredentialAutoRegister' -Value $false -Initialize -Validation bool -Handler { [Sqlcollaborative.Dbatools.Connection.ConnectionHost]::DisableCredentialAutoRegister = $args[0] } -Description 'Disables the automatic registration of working credentials. dbatools will caches the last working credential when connecting using wmi/cim and will use those rather than using known bad credentials'

# Enables automatic failover of credentials. If enabled, CM will use known-to-work credentials in case of non-working credentials
Set-DbatoolsConfig -FullName 'ComputerManagement.Cache.Enable.CredentialFailover' -Value $false -Initialize -Validation bool -Handler { [Sqlcollaborative.Dbatools.Connection.ConnectionHost]::EnableCredentialFailover = $args[0] } -Description 'Enables automatically failing over to known to work credentials, when specified credentials will not work.'

# Force-Overrides explicit credentials with cached-as-working credentials
Set-DbatoolsConfig -FullName 'ComputerManagement.Cache.Force.OverrideExplicitCredential' -Value $false -Initialize -Validation bool -Handler { [Sqlcollaborative.Dbatools.Connection.ConnectionHost]::OverrideExplicitCredential = $args[0] } -Description 'Enabling this will force the use of the last credentials known to work, rather than even trying explicit credentials.'

# Disables or enables globally which Remote Management channels can be used
Set-DbatoolsConfig -FullName 'ComputerManagement.Type.Disable.CimRM' -Value $false -Initialize -Validation bool -Handler { [Sqlcollaborative.Dbatools.Connection.ConnectionHost]::DisableConnectionCimRM = $args[0] } -Description 'Globally disables all connections using Cim over WinRM'
Set-DbatoolsConfig -FullName 'ComputerManagement.Type.Disable.CimDCOM' -Value $false -Initialize -Validation bool -Handler { [Sqlcollaborative.Dbatools.Connection.ConnectionHost]::DisableConnectionCimDCOM = $args[0] } -Description 'Globally disables all connections using Cim over DCOM'
Set-DbatoolsConfig -FullName 'ComputerManagement.Type.Disable.WMI' -Value $true -Initialize -Validation bool -Handler { [Sqlcollaborative.Dbatools.Connection.ConnectionHost]::DisableConnectionWMI = $args[0] } -Description 'Globally disables all connections using WMI'
Set-DbatoolsConfig -FullName 'ComputerManagement.Type.Disable.PowerShellRemoting' -Value $true -Initialize -Validation bool -Handler { [Sqlcollaborative.Dbatools.Connection.ConnectionHost]::DisableConnectionPowerShellRemoting = $args[0] } -Description 'Globally disables all connections using PowerShell Remoting'
#TODO: Implement Handler for type validation

tools\dbatools\internal\configurations\settings\formatting.ps1

# The default formatting style for dates
Set-DbatoolsConfig -FullName 'Formatting.Date' -Value "dd MMM yyyy" -Initialize -Validation string -Handler { [Sqlcollaborative.Dbatools.Utility.UtilityHost]::FormatDate = $args[0] } -Description "The default formatting of Dates"

# The default formatting style for full datetime objects
Set-DbatoolsConfig -FullName 'Formatting.DateTime' -Value "yyyy-MM-dd HH:mm:ss.fff" -Initialize -Validation string -Handler { [Sqlcollaborative.Dbatools.Utility.UtilityHost]::FormatDateTime = $args[0] } -Description "The default formatting style for full datetime objects"

# The default formatting style for time objects
Set-DbatoolsConfig -FullName 'Formatting.Time' -Value "HH:mm:ss" -Initialize -Validation string -Handler { [Sqlcollaborative.Dbatools.Utility.UtilityHost]::FormatTime = $args[0] } -Description "The default formatting style for full datetime objects"

# Disable custom Datetime formats
Set-DbatoolsConfig -FullName 'Formatting.Disable.CustomDateTime' -Value $false -Initialize -Validation bool -Handler { [Sqlcollaborative.Dbatools.Utility.UtilityHost]::DisableCustomDateTime = $args[0] } -Description "Controls whether custom DateTime formats are used or whether to default back to DateTime standard."

# Disable custom TimeSpan formats
Set-DbatoolsConfig -FullName 'Formatting.Disable.CustomTimeSpan' -Value $false -Initialize -Validation bool -Handler { [Sqlcollaborative.Dbatools.Utility.UtilityHost]::DisableCustomTimeSpan = $args[0] } -Description "Controls whether custom TimeSpan formats are used or whether to default back to DateTime standard."

Set-DbatoolsConfig -FullName 'Formatting.size.style' -Value ([Sqlcollaborative.Dbatools.Utility.SizeStyle]::Dynamic) -Initialize -Validation sizestyle -Handler { [Sqlcollaborative.Dbatools.Utility.UtilityHost]::SizeStyle = $args[0] } -Description "Controls how size objects are displayed by default. Generally, their string representation is calculated to be user friendly (dynamic), can be updated to 'plain' number or a specific size. Can be overriden on a per-object basis."
Set-DbatoolsConfig -FullName 'Formatting.size.digits' -Value 2 -Initialize -Validation integer0to9 -Handler { [Sqlcollaborative.Dbatools.Utility.UtilityHost]::SizeDigits = $args[0] } -Description "How many digits are used when displaying a size object."

tools\dbatools\internal\configurations\settings\import.ps1

# Handle dotsourcing on import
Set-DbatoolsConfig -Name 'Import.DoDotSource' -Value $false -Initialize -Validation bool -Handler {
    try {
        if (-not (Test-Path "HKCU:\SOFTWARE\Microsoft\WindowsPowerShell\dbatools\System")) {
            $null = New-Item "HKCU:\SOFTWARE\Microsoft\WindowsPowerShell\dbatools\System" -ItemType Container -Force -ErrorAction Stop
        }
        if ($args[0]) {
            $null = New-ItemProperty "HKCU:\SOFTWARE\Microsoft\WindowsPowerShell\dbatools\System" -Name DoDotSource -PropertyType DWORD -Value 1 -Force -ErrorAction Stop
        } else {
            $null = New-ItemProperty "HKCU:\SOFTWARE\Microsoft\WindowsPowerShell\dbatools\System" -Name DoDotSource -PropertyType DWORD -Value 0 -Force -ErrorAction Stop
        }
        # Scope Boundary exception: $cfg is defined in Set-DbatoolsConfig
        Register-DbatoolsConfig -Config $cfg
    } catch {
        Write-Message -Level Warning -Message "Failed to apply configuration 'Import.DoDotSource'" -ErrorRecord $_ -Target 'Import.DoDotSource'
    }
} -Description "Causes the module to be imported using dotsourcing. Security policy may require it, also useful for debugging. This configuration setting persists across all PowerShell consoles for this user!"

# Handle dotsourcing on import
Set-DbatoolsConfig -Name 'Import.StrictSecurityMode' -Value $false -Initialize -Validation bool -Handler {
    try {
        if (-not (Test-Path "HKCU:\SOFTWARE\Microsoft\WindowsPowerShell\dbatools\System")) {
            $null = New-Item "HKCU:\SOFTWARE\Microsoft\WindowsPowerShell\dbatools\System" -ItemType Container -Force -ErrorAction Stop
        }
        if ($args[0]) {
            $null = New-ItemProperty "HKCU:\SOFTWARE\Microsoft\WindowsPowerShell\dbatools\System" -Name StrictSecurityMode -PropertyType DWORD -Value 1 -Force -ErrorAction Stop
        } else {
            $null = New-ItemProperty "HKCU:\SOFTWARE\Microsoft\WindowsPowerShell\dbatools\System" -Name StrictSecurityMode -PropertyType DWORD -Value 0 -Force -ErrorAction Stop
        }
        # Scope Boundary exception: $cfg is defined in Set-DbatoolsConfig
        Register-DbatoolsConfig -Config $cfg
    } catch {
        Write-Message -Level Warning -Message "Failed to apply configuration 'Import.StrictSecurityMode'" -ErrorRecord $_ -Target 'Import.StrictSecurityMode'
    }
} -Description "Causes the module to import its components only from the module directory. This makes it harder to update the module, but may be required by security policy. This configuration setting persists across all PowerShell consoles for this user!"

# Handle dotsourcing on import
Set-DbatoolsConfig -Name 'Import.AlwaysBuildLibrary' -Value $false -Initialize -Validation bool -Handler {
    try {
        if (-not (Test-Path "HKCU:\SOFTWARE\Microsoft\WindowsPowerShell\dbatools\System")) {
            $null = New-Item "HKCU:\SOFTWARE\Microsoft\WindowsPowerShell\dbatools\System" -ItemType Container -Force -ErrorAction Stop
        }
        if ($args[0]) {
            $null = New-ItemProperty "HKCU:\SOFTWARE\Microsoft\WindowsPowerShell\dbatools\System" -Name AlwaysBuildLibrary -PropertyType DWORD -Value 1 -Force -ErrorAction Stop
        } else {
            $null = New-ItemProperty "HKCU:\SOFTWARE\Microsoft\WindowsPowerShell\dbatools\System" -Name AlwaysBuildLibrary -PropertyType DWORD -Value 0 -Force -ErrorAction Stop
        }
        # Scope Boundary exception: $cfg is defined in Set-DbatoolsConfig
        Register-DbatoolsConfig -Config $cfg
    } catch {
        Write-Message -Level Warning -Message "Failed to apply configuration 'Import.AlwaysBuildLibrary'" -ErrorRecord $_ -Target 'Import.AlwaysBuildLibrary'
    }
} -Description "Causes the module to compile the library from source on every import. Of interest for developers only, as this imposes a significant increase in import time. This configuration setting persists across all PowerShell consoles for this user!"

# Handle dotsourcing on import
Set-DbatoolsConfig -Name 'Import.SerialImport' -Value $false -Initialize -Validation bool -Handler {
    try {
        if (-not (Test-Path "HKCU:\SOFTWARE\Microsoft\WindowsPowerShell\dbatools\System")) {
            $null = New-Item "HKCU:\SOFTWARE\Microsoft\WindowsPowerShell\dbatools\System" -ItemType Container -Force -ErrorAction Stop
        }
        if ($args[0]) {
            $null = New-ItemProperty "HKCU:\SOFTWARE\Microsoft\WindowsPowerShell\dbatools\System" -Name SerialImport -PropertyType DWORD -Value 1 -Force -ErrorAction Stop
        } else {
            $null = New-ItemProperty "HKCU:\SOFTWARE\Microsoft\WindowsPowerShell\dbatools\System" -Name SerialImport -PropertyType DWORD -Value 0 -Force -ErrorAction Stop
        }
        # Scope Boundary exception: $cfg is defined in Set-DbatoolsConfig
        Register-DbatoolsConfig -Config $cfg
    } catch {
        Write-Message -Level Warning -Message "Failed to apply configuration 'Import.SerialImport'" -ErrorRecord $_ -Target 'Import.SerialImport'
    }
} -Description "Enabling this will cause the module to perform import in a serial manner, not parallelizing anything. This will impose a significant delay on import, but reduces the CPU impact during import. Setting this for an unattended script may be useful to avoid resource alerts. Can be set on script level by placing the following code in the first line: '`$dbatools_serialimport = `$true'. This configuration setting persists across all PowerShell consoles for this user."

# Check for SqlPs
Set-DbatoolsConfig -Name 'Import.SqlpsCheck' -Value $true -Initialize -Validation bool -Description "Does not warn about sqlps being imported at the time of the dbatools import"

tools\dbatools\internal\configurations\settings\logging.ps1

<#
This is for all configuration values regarding the logging system

NOTES:
- All these configurations should have a handler, as the logging system relies entirely on static fields for performance reasons
- If you want to change the default values, change them both here AND in the C# library
#>

Set-DbatoolsConfig -FullName 'Logging.MaxErrorCount' -Value 128 -Initialize -Validation integerpositive -Handler { [Sqlcollaborative.Dbatools.Message.LogHost]::MaxErrorCount = $args[0] } -Description "The maximum number of error records maintained in-memory. This setting is on a per-Process basis. Runspaces share, jobs or other consoles counted separately."
Set-DbatoolsConfig -FullName 'Logging.MaxMessageCount' -Value 1024 -Initialize -Validation integerpositive -Handler { [Sqlcollaborative.Dbatools.Message.LogHost]::MaxMessageCount = $args[0] } -Description "The maximum number of messages that can be maintained in the in-memory message queue. This setting is on a per-Process basis. Runspaces share, jobs or other consoles counted separately."
Set-DbatoolsConfig -FullName 'Logging.MaxMessagefileBytes' -Value 5MB -Initialize -Validation integerpositive -Handler { [Sqlcollaborative.Dbatools.Message.LogHost]::MaxMessagefileBytes = $args[0] } -Description "The maximum size of a given logfile. When reaching this limit, the file will be abandoned and a new log created. Set to 0 to not limit the size. This setting is on a per-Process basis. Runspaces share, jobs or other consoles counted separately."
Set-DbatoolsConfig -FullName 'Logging.MaxMessagefileCount' -Value 5 -Initialize -Validation integerpositive -Handler { [Sqlcollaborative.Dbatools.Message.LogHost]::MaxMessagefileCount = $args[0] } -Description "The maximum number of logfiles maintained at a time. Exceeding this number will cause the oldest to be culled. Set to 0 to disable the limit. This setting is on a per-Process basis. Runspaces share, jobs or other consoles counted separately."
Set-DbatoolsConfig -FullName 'Logging.MaxErrorFileBytes' -Value 20MB -Initialize -Validation integerpositive -Handler { [Sqlcollaborative.Dbatools.Message.LogHost]::MaxErrorFileBytes = $args[0] } -Description "The maximum size all error files combined may have. When this number is exceeded, the oldest entry is culled. This setting is on a per-Process basis. Runspaces share, jobs or other consoles counted separately."
Set-DbatoolsConfig -FullName 'Logging.MaxTotalFolderSize' -Value 100MB -Initialize -Validation integerpositive -Handler { [Sqlcollaborative.Dbatools.Message.LogHost]::MaxTotalFolderSize = $args[0] } -Description "This is the upper limit of length all items in the log folder may have combined across all processes."
Set-DbatoolsConfig -FullName 'Logging.MaxLogFileAge' -Value (New-TimeSpan -Days 7) -Initialize -Validation timespan -Handler { [Sqlcollaborative.Dbatools.Message.LogHost]::MaxLogFileAge = $args[0] } -Description "Any logfile older than this will automatically be cleansed. This setting is global."
Set-DbatoolsConfig -FullName 'Logging.MessageLogFileEnabled' -Value $true -Initialize -Validation bool -Handler { [Sqlcollaborative.Dbatools.Message.LogHost]::MessageLogFileEnabled = $args[0] } -Description "Governs, whether a log file for the system messages is written. This setting is on a per-Process basis. Runspaces share, jobs or other consoles counted separately."
Set-DbatoolsConfig -FullName 'Logging.MessageLogEnabled' -Value $true -Initialize -Validation bool -Handler { [Sqlcollaborative.Dbatools.Message.LogHost]::MessageLogEnabled = $args[0] } -Description "Governs, whether a log of recent messages is kept in memory. This setting is on a per-Process basis. Runspaces share, jobs or other consoles counted separately."
Set-DbatoolsConfig -FullName 'Logging.ErrorLogFileEnabled' -Value $true -Initialize -Validation bool -Handler { [Sqlcollaborative.Dbatools.Message.LogHost]::ErrorLogFileEnabled = $args[0] } -Description "Governs, whether log files for errors are written. This setting is on a per-Process basis. Runspaces share, jobs or other consoles counted separately."
Set-DbatoolsConfig -FullName 'Logging.ErrorLogEnabled' -Value $true -Initialize -Validation bool -Handler { [Sqlcollaborative.Dbatools.Message.LogHost]::ErrorLogEnabled = $args[0] } -Description "Governs, whether a log of recent errors is kept in memory. This setting is on a per-Process basis. Runspaces share, jobs or other consoles counted separately."

tools\dbatools\internal\configurations\settings\paths.ps1

<#
This is designed for all paths you need configurations for.
#>

# The default path where dbatools stores persistent data
Set-DbatoolsConfig -FullName 'Path.DbatoolsData' -Value (Join-DbaPath $script:AppData "PowerShell" "dbatools") -Initialize -Validation string -Handler {  } -Description "The path where dbatools stores persistent data on a per user basis."

# The default path where dbatools stores temporary data
Set-DbatoolsConfig -FullName 'Path.DbatoolsTemp' -Value ([System.IO.Path]::GetTempPath()).TrimEnd("\") -Initialize -Validation string -Handler { } -Description "The path where dbatools stores temporary data."

# The default path for writing logs
Set-DbatoolsConfig -FullName 'Path.DbatoolsLogPath' -Value (Join-DbaPath $script:AppData "PowerShell" "dbatools") -Initialize -Validation string -Handler { [Sqlcollaborative.Dbatools.Message.LogHost]::LoggingPath = $args[0] } -Description "The path where dbatools writes all its logs and debugging information."

# The default Path for where the tags Json is stored
Set-DbatoolsConfig -FullName 'Path.TagCache' -Value (Resolve-Path "$script:PSModuleRoot\bin\dbatools-index.json") -Initialize -Validation string -Handler { } -Description "The file in which dbatools stores the tag cache. That cache is used in Find-DbaCommand for more comfortable autocomplete"

# The default Path for the server list (Get-DbaServerList, etc)
Set-DbatoolsConfig -FullName 'Path.Servers' -Value (Join-DbaPath $script:AppData "PowerShell" "dbatools" "servers.xml") -Initialize -Validation string -Handler { } -Description "The file in which dbatools stores the current user's server list, as managed by Get/Add/Update-DbaServerList"

tools\dbatools\internal\configurations\settings\remoting.ps1

# Handles PowerShell Session scrapping timeout
Set-DbatoolsConfig -FullName 'PSRemoting.Sessions.ExpirationTimeout' -Value (New-TimeSpan -Minutes 5) -Initialize -Validation timespan -Handler { [Sqlcollaborative.Dbatools.Connection.ConnectionHost]::PSSessionTimeout = $args[0] } -Description 'The timeout interval for PowerShell remote sessions. Dbatools will kill sessions that have been idle for this amount of time.'

# Disables session caching
Set-DbatoolsConfig -FullName 'PSRemoting.Sessions.Enable' -Value $true -Initialize -Validation bool -Handler { [Sqlcollaborative.Dbatools.Connection.ConnectionHost]::PSSessionCacheEnabled = $args[0] } -Description 'Globally enables session caching for PowerShell remoting'

# Prefer CredSSP failback in Invoke-Program
Set-DbatoolsConfig -FullName 'PSRemoting.Sessions.UsePSSessionConfiguration' -Value $false -Initialize -Validation bool -Description 'Skip CredSSP connection attempt and use a PSSessionConfiguration workaround when executing Invoke-Program'

tools\dbatools\functions\Watch-DbaUpdate.ps1

function Watch-DbaUpdate {
    <#
    .SYNOPSIS
        Just for fun - checks the PowerShell Gallery every 1 hour for updates to dbatools. Notifies once per release.

    .DESCRIPTION
        Just for fun - checks the PowerShell Gallery every 1 hour for updates to dbatools. Notifies once max per release.

        Anyone know how to make it clickable so that it opens an URL?

    .NOTES
        Tags: JustForFun, Module
        Author: Chrissy LeMaire (@cl), netnerds.net

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Watch-DbaUpdate

    .EXAMPLE
        PS C:\> Watch-DbaUpdate

        Watches the gallery for updates to dbatools.

    #>
    [cmdletbinding()]
    param()
    process {
        if (([Environment]::OSVersion).Version.Major -lt 10) {
            Write-Message -Level Warning -Message "This command only supports Windows 10 and higher."
            return
        }

        if ($null -eq (Get-ScheduledTask -TaskName "dbatools version check" -ErrorAction SilentlyContinue)) {
            Install-DbaWatchUpdate
        }

        # leave this in for the scheduled task
        $module = Get-Module -Name dbatools

        if (-not $module) {
            Import-Module dbatools
            $module = Get-Module -Name dbatools
        }

        $galleryVersion = (Find-Module -Name dbatools -Repository PSGallery).Version
        $localVersion = $module.Version

        if ($galleryVersion -le $localVersion) { return }

        $file = "$env:LOCALAPPDATA\dbatools\watchupdate.xml"

        $new = [PSCustomObject]@{
            NotifyVersion = $galleryVersion
        }

        # now that notifications stay until they are checked, we just have to keep
        # track of the last version we notified about

        if (Test-Path $file) {
            $old = Import-Clixml -Path $file -ErrorAction SilentlyContinue

            if ($galleryVersion -gt $old.NotifyVersion) {
                Export-Clixml -InputObject $new -Path $file
                Show-Notification -GalleryVersion $galleryVersion
            }
        } else {
            $directory = Split-Path $file

            if (!(Test-Path $directory)) {
                $null = New-Item -ItemType Directory -Path $directory
            }

            Export-Clixml -InputObject $new -Path $file
            Show-Notification -GalleryVersion $galleryVersion
        }
    }
}

tools\dbatools\internal\configurations\settings\sql.ps1

# Controls the timeout on sql connects
Set-DbatoolsConfig -FullName 'sql.connection.timeout' -Value 15 -Initialize -Validation integerpositive -Handler { [Sqlcollaborative.Dbatools.Connection.ConnectionHost]::SqlConnectionTimeout = $args[0] } -Description "The number of seconds before sql server connection attempts are aborted"

tools\dbatools\internal\configurations\settings\tabexpansion.ps1

# Sets the default interval and timeout for TEPP updates
Set-DbatoolsConfig -FullName 'TabExpansion.UpdateInterval' -Value (New-TimeSpan -Minutes 3) -Initialize -Validation timespan -Handler { [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::TeppUpdateInterval = $args[0] } -Description 'The frequency in which TEPP tries to update each cache for autocompletion'
Set-DbatoolsConfig -FullName 'TabExpansion.UpdateTimeout' -Value (New-TimeSpan -Seconds 30) -Initialize -Validation timespan -Handler { [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::TeppUpdateTimeout = $args[0] } -Description 'After this timespan has passed without connections to a server, the TEPP updater will no longer update the cache.'

# Disable the management cache entire
Set-DbatoolsConfig -FullName 'TabExpansion.Disable' -Value $false -Initialize -Validation bool -Handler {
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::TeppDisabled = $args[0]

    # Disable Async TEPP runspace if not needed
    if ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::TeppAsyncDisabled -or [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::TeppDisabled) {
        [Sqlcollaborative.Dbatools.Runspace.RunspaceHost]::Runspaces["dbatools-teppasynccache"].Stop()
    } else {
        [Sqlcollaborative.Dbatools.Runspace.RunspaceHost]::Runspaces["dbatools-teppasynccache"].Start()
    }
} -Description 'Globally disables all TEPP functionality by dbatools'
Set-DbatoolsConfig -FullName 'TabExpansion.Disable.Asynchronous' -Value $false -Initialize -Validation bool -Handler {
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::TeppAsyncDisabled = $args[0]

    # Disable Async TEPP runspace if not needed
    if ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::TeppAsyncDisabled -or [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::TeppDisabled) {
        [Sqlcollaborative.Dbatools.Runspace.RunspaceHost]::Runspaces["dbatools-teppasynccache"].Stop()
    } else {
        [Sqlcollaborative.Dbatools.Runspace.RunspaceHost]::Runspaces["dbatools-teppasynccache"].Start()
    }
} -Description 'Globally disables asynchronous TEPP updates in the background'
Set-DbatoolsConfig -FullName 'TabExpansion.Disable.Synchronous' -Value $true -Initialize -Validation bool -Handler { [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::TeppSyncDisabled = $args[0] } -Description 'Globally disables synchronous TEPP updates, performed whenever connecting o the server. If this is not disabled, it will only perform updates that are fast to perform, in order to minimize performance impact. This may lead to some TEPP functionality loss if asynchronous updates are disabled.'

tools\dbatools\internal\configurations\validation\consolecolor.ps1

Register-DbatoolsConfigValidation -Name "consolecolor" -ScriptBlock {
    param (
        $Value
    )

    $Result = New-Object PSObject -Property @{
        Success = $True
        Value   = $null
        Message = ""
    }

    try { [System.ConsoleColor]$color = $Value }
    catch {
        $Result.Message = "Not a console color: $Value"
        $Result.Success = $False
        return $Result
    }

    $Result.Value = $color

    return $Result
}

tools\dbatools\internal\configurations\validation\long.ps1

Register-DbatoolsConfigValidation -Name "long" -ScriptBlock {
    param (
        $Value
    )

    $Result = New-Object PSOBject -Property @{
        Success = $True
        Value   = $null
        Message = ""
    }

    try { [long]$number = $Value }
    catch {
        $Result.Message = "Not a long: $Value"
        $Result.Success = $False
        return $Result
    }

    $Result.Value = $number

    return $Result
}

tools\dbatools\internal\configurations\validation\sizestyle.ps1

Register-DbatoolsConfigValidation -Name "sizestyle" -ScriptBlock {
    param (
        $Value
    )

    $Result = New-Object PSObject -Property @{
        Success = $True
        Value   = $null
        Message = ""
    }

    try { [Sqlcollaborative.Dbatools.Utility.SizeStyle]$style = $Value }
    catch {
        $Result.Message = "Not a size style: $Value"
        $Result.Success = $False
        return $Result
    }

    $Result.Value = $style

    return $Result
}

tools\dbatools\internal\dynamicparams\alert.ps1

#region Initialize Cache
if (-not [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["alert"]) {
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["alert"] = @{ }
}
#endregion Initialize Cache

#region Tepp Data return
$ScriptBlock = {
    param (
        $commandName,

        $parameterName,

        $wordToComplete,

        $commandAst,

        $fakeBoundParameter
    )


    $server = $fakeBoundParameter['SqlInstance']

    if (-not $server) {
        $server = $fakeBoundParameter['Source']
    }

    if (-not $server) {
        $server = $fakeBoundParameter['ComputerName']
    }

    if (-not $server) { return }

    try {
        [DbaInstanceParameter]$parServer = $server | Select-Object -First 1
    } catch {
        return
    }

    if ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["alert"][$parServer.FullSmoName.ToLower()]) {
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["alert"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    }

    try {
        $serverObject = Connect-SqlInstance -SqlInstance $parServer -SqlCredential $fakeBoundParameter['SqlCredential'] -ErrorAction Stop
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["alert"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    } catch {
        return
    }
}

Register-DbaTeppScriptblock -ScriptBlock $ScriptBlock -Name alert
#endregion Tepp Data return

#region Update Cache
$ScriptBlock = {

    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["alert"][$FullSmoName] = $server.JobServer.Alerts.Name
}
Register-DbaTeppInstanceCacheBuilder -ScriptBlock $ScriptBlock
#endregion Update Cache

tools\dbatools\internal\dynamicparams\alertcategory.ps1

#region Initialize Cache
if (-not [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["alertcategory"]) {
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["alertcategory"] = @{ }
}
#endregion Initialize Cache

#region Tepp Data return
$ScriptBlock = {
    param (
        $commandName,

        $parameterName,

        $wordToComplete,

        $commandAst,

        $fakeBoundParameter
    )


    $server = $fakeBoundParameter['SqlInstance']

    if (-not $server) {
        $server = $fakeBoundParameter['Source']
    }

    if (-not $server) {
        $server = $fakeBoundParameter['ComputerName']
    }

    if (-not $server) { return }

    try {
        [DbaInstanceParameter]$parServer = $server | Select-Object -First 1
    } catch {
        return
    }

    if ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["alertcategory"][$parServer.FullSmoName.ToLower()]) {
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["alertcategory"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    }

    try {
        $serverObject = Connect-SqlInstance -SqlInstance $parServer -SqlCredential $fakeBoundParameter['SqlCredential'] -ErrorAction Stop
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["alertcategory"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    } catch {
        return
    }
}

Register-DbaTeppScriptblock -ScriptBlock $ScriptBlock -Name AlertCategory
#endregion Tepp Data return

#region Update Cache
$ScriptBlock = {

    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["alertcategory"][$FullSmoName] = $server.JobServer.AlertCategories.Name
}
Register-DbaTeppInstanceCacheBuilder -ScriptBlock $ScriptBlock
#endregion Update Cache

tools\dbatools\internal\dynamicparams\audit.ps1

#region Initialize Cache
if (-not [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["audit"]) {
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["audit"] = @{ }
}
#endregion Initialize Cache

#region Tepp Data return
$ScriptBlock = {
    param (
        $commandName,

        $parameterName,

        $wordToComplete,

        $commandAst,

        $fakeBoundParameter
    )


    $server = $fakeBoundParameter['SqlInstance']

    if (-not $server) {
        $server = $fakeBoundParameter['Source']
    }

    if (-not $server) {
        $server = $fakeBoundParameter['ComputerName']
    }

    if (-not $server) { return }

    try {
        [DbaInstanceParameter]$parServer = $server | Select-Object -First 1
    } catch {
        return
    }

    if ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["audit"][$parServer.FullSmoName.ToLower()]) {
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["audit"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    }

    try {
        $serverObject = Connect-SqlInstance -SqlInstance $parServer -SqlCredential $fakeBoundParameter['SqlCredential'] -ErrorAction Stop
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["audit"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    } catch {
        return
    }
}

Register-DbaTeppScriptblock -ScriptBlock $ScriptBlock -Name Audit
#endregion Tepp Data return

#region Update Cache
$ScriptBlock = {

    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["audit"][$FullSmoName] = $server.Audits.Name
}
Register-DbaTeppInstanceCacheBuilder -ScriptBlock $ScriptBlock
#endregion Update Cache

tools\dbatools\internal\dynamicparams\auditspecification.ps1

#region Initialize Cache
if (-not [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["auditspecification"]) {
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["auditspecification"] = @{ }
}
#endregion Initialize Cache

#region Tepp Data return
$ScriptBlock = {
    param (
        $commandName,

        $parameterName,

        $wordToComplete,

        $commandAst,

        $fakeBoundParameter
    )


    $server = $fakeBoundParameter['SqlInstance']

    if (-not $server) {
        $server = $fakeBoundParameter['Source']
    }

    if (-not $server) {
        $server = $fakeBoundParameter['ComputerName']
    }

    if (-not $server) { return }

    try {
        [DbaInstanceParameter]$parServer = $server | Select-Object -First 1
    } catch {
        return
    }

    if ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["auditspecification"][$parServer.FullSmoName.ToLower()]) {
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["auditspecification"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    }

    try {
        $serverObject = Connect-SqlInstance -SqlInstance $parServer -SqlCredential $fakeBoundParameter['SqlCredential'] -ErrorAction Stop
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["auditspecification"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    } catch {
        return
    }
}

Register-DbaTeppScriptblock -ScriptBlock $ScriptBlock -Name AuditSpecification
#endregion Tepp Data return

#region Update Cache
$ScriptBlock = {

    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["auditspecification"][$FullSmoName] = $server.AuditSpecifications.Name
}
Register-DbaTeppInstanceCacheBuilder -ScriptBlock $ScriptBlock
#endregion Update Cache

tools\dbatools\internal\dynamicparams\availabilitygroup.ps1

#region Initialize Cache
if (-not [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["availabilitygroup"]) {
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["availabilitygroup"] = @{ }
}
#endregion Initialize Cache

#region Tepp Data return
$ScriptBlock = {
    param (
        $commandName,

        $parameterName,

        $wordToComplete,

        $commandAst,

        $fakeBoundParameter
    )


    $server = $fakeBoundParameter['SqlInstance']

    if (-not $server) {
        $server = $fakeBoundParameter['Source']
    }

    if (-not $server) {
        $server = $fakeBoundParameter['ComputerName']
    }

    if (-not $server) { return }

    try {
        [DbaInstanceParameter]$parServer = $server | Select-Object -First 1
    } catch {
        return
    }

    if ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["availabilitygroup"][$parServer.FullSmoName.ToLower()]) {
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["availabilitygroup"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    }

    try {
        $serverObject = Connect-SqlInstance -SqlInstance $parServer -SqlCredential $fakeBoundParameter['SqlCredential'] -ErrorAction Stop
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["availabilitygroup"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    } catch {
        return
    }
}

Register-DbaTeppScriptblock -ScriptBlock $ScriptBlock -Name AvailabilityGroup
#endregion Tepp Data return

#region Update Cache
$ScriptBlock = {

    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["availabilitygroup"][$FullSmoName] = $server.AvailabilityGroups.Name
}
Register-DbaTeppInstanceCacheBuilder -ScriptBlock $ScriptBlock
#endregion Update Cache

tools\dbatools\internal\dynamicparams\backupdevice.ps1

#region Initialize Cache
if (-not [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["backupdevice"]) {
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["backupdevice"] = @{ }
}
#endregion Initialize Cache

#region Tepp Data return
$ScriptBlock = {
    param (
        $commandName,

        $parameterName,

        $wordToComplete,

        $commandAst,

        $fakeBoundParameter
    )


    $server = $fakeBoundParameter['SqlInstance']

    if (-not $server) {
        $server = $fakeBoundParameter['Source']
    }

    if (-not $server) {
        $server = $fakeBoundParameter['ComputerName']
    }

    if (-not $server) { return }

    try {
        [DbaInstanceParameter]$parServer = $server | Select-Object -First 1
    } catch {
        return
    }

    if ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["backupdevice"][$parServer.FullSmoName.ToLower()]) {
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["backupdevice"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    }

    try {
        $serverObject = Connect-SqlInstance -SqlInstance $parServer -SqlCredential $fakeBoundParameter['SqlCredential'] -ErrorAction Stop
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["backupdevice"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    } catch {
        return
    }
}

Register-DbaTeppScriptblock -ScriptBlock $ScriptBlock -Name BackupDevice
#endregion Tepp Data return

#region Update Cache
$ScriptBlock = {

    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["backupdevice"][$FullSmoName] = $server.BackupDevices.Name
}
Register-DbaTeppInstanceCacheBuilder -ScriptBlock $ScriptBlock
#endregion Update Cache

tools\dbatools\internal\dynamicparams\credential.ps1

#region Initialize Cache
if (-not [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["credential"]) {
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["credential"] = @{ }
}
#endregion Initialize Cache

#region Tepp Data return
$ScriptBlock = {
    param (
        $commandName,

        $parameterName,

        $wordToComplete,

        $commandAst,

        $fakeBoundParameter
    )


    $server = $fakeBoundParameter['SqlInstance']

    if (-not $server) {
        $server = $fakeBoundParameter['Source']
    }

    if (-not $server) {
        $server = $fakeBoundParameter['ComputerName']
    }

    if (-not $server) { return }

    try {
        [DbaInstanceParameter]$parServer = $server | Select-Object -First 1
    } catch {
        return
    }

    if ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["credential"][$parServer.FullSmoName.ToLower()]) {
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["credential"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    }

    try {
        $serverObject = Connect-SqlInstance -SqlInstance $parServer -SqlCredential $fakeBoundParameter['SqlCredential'] -ErrorAction Stop
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["credential"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    } catch {
        return
    }
}

Register-DbaTeppScriptblock -ScriptBlock $ScriptBlock -Name Credential
#endregion Tepp Data return

#region Update Cache
$ScriptBlock = {

    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["credential"][$FullSmoName] = $server.Credentials.Name
}
Register-DbaTeppInstanceCacheBuilder -ScriptBlock $ScriptBlock
#endregion Update Cache

tools\dbatools\internal\dynamicparams\customerror.ps1

#region Initialize Cache
if (-not [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["customerror"]) {
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["customerror"] = @{ }
}
#endregion Initialize Cache

#region Tepp Data return
$ScriptBlock = {
    param (
        $commandName,

        $parameterName,

        $wordToComplete,

        $commandAst,

        $fakeBoundParameter
    )


    $server = $fakeBoundParameter['SqlInstance']

    if (-not $server) {
        $server = $fakeBoundParameter['Source']
    }

    if (-not $server) {
        $server = $fakeBoundParameter['ComputerName']
    }

    if (-not $server) { return }

    try {
        [DbaInstanceParameter]$parServer = $server | Select-Object -First 1
    } catch {
        return
    }

    if ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["customerror"][$parServer.FullSmoName.ToLower()]) {
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["customerror"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    }

    try {
        $serverObject = Connect-SqlInstance -SqlInstance $parServer -SqlCredential $fakeBoundParameter['SqlCredential'] -ErrorAction Stop
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["customerror"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    } catch {
        return
    }
}

Register-DbaTeppScriptblock -ScriptBlock $ScriptBlock -Name CustomError
#endregion Tepp Data return

#region Update Cache
$ScriptBlock = {

    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["customerror"][$FullSmoName] = $server.UserDefinedMessages.ID
}
Register-DbaTeppInstanceCacheBuilder -ScriptBlock $ScriptBlock
#endregion Update Cache

tools\dbatools\internal\dynamicparams\database.ps1

#region Initialize Cache
if (-not [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["database"]) {
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["database"] = @{ }
}
#endregion Initialize Cache

#region Tepp Data return
$ScriptBlock = {
    param (
        $commandName,

        $parameterName,

        $wordToComplete,

        $commandAst,

        $fakeBoundParameter
    )


    $server = $fakeBoundParameter['SqlInstance']

    if (-not $server) {
        $server = $fakeBoundParameter['Source']
    }

    if (-not $server) {
        $server = $fakeBoundParameter['ComputerName']
    }

    if (-not $server) { return }

    try {
        [DbaInstanceParameter]$parServer = $server | Select-Object -First 1
    } catch {
        return
    }

    if ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["database"][$parServer.FullSmoName.ToLower()]) {
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["database"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    }

    try {
        $serverObject = Connect-SqlInstance -SqlInstance $parServer -SqlCredential $fakeBoundParameter['SqlCredential'] -ErrorAction Stop
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["database"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    } catch {
        return
    }
}

Register-DbaTeppScriptblock -ScriptBlock $ScriptBlock -Name Database
#endregion Tepp Data return

#region Update Cache
$ScriptBlock = {
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["database"][$FullSmoName] = $server.Databases.Name
}
Register-DbaTeppInstanceCacheBuilder -ScriptBlock $ScriptBlock
#endregion Update Cache

tools\dbatools\internal\dynamicparams\endpoint.ps1

#region Initialize Cache
if (-not [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["endpoint"]) {
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["endpoint"] = @{ }
}
#endregion Initialize Cache

#region Tepp Data return
$ScriptBlock = {
    param (
        $commandName,

        $parameterName,

        $wordToComplete,

        $commandAst,

        $fakeBoundParameter
    )


    $server = $fakeBoundParameter['SqlInstance']

    if (-not $server) {
        $server = $fakeBoundParameter['Source']
    }

    if (-not $server) {
        $server = $fakeBoundParameter['ComputerName']
    }

    if (-not $server) { return }

    try {
        [DbaInstanceParameter]$parServer = $server | Select-Object -First 1
    } catch {
        return
    }

    if ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["endpoint"][$parServer.FullSmoName.ToLower()]) {
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["endpoint"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    }

    try {
        $serverObject = Connect-SqlInstance -SqlInstance $parServer -SqlCredential $fakeBoundParameter['SqlCredential'] -ErrorAction Stop
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["endpoint"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    } catch {
        return
    }
}

Register-DbaTeppScriptblock -ScriptBlock $ScriptBlock -Name Endpoint
#endregion Tepp Data return

#region Update Cache
$ScriptBlock = {

    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["endpoint"][$FullSmoName] = ($server.Endpoints | Where-Object IsSystemObject -eq $false).Name
}
Register-DbaTeppInstanceCacheBuilder -ScriptBlock $ScriptBlock
#endregion Update Cache

tools\dbatools\internal\dynamicparams\group.ps1

#region Initialize Cache
if (-not [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["group"]) {
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["group"] = @{ }
}
#endregion Initialize Cache

#region Tepp Data return
$ScriptBlock = {
    param (
        $commandName,

        $parameterName,

        $wordToComplete,

        $commandAst,

        $fakeBoundParameter
    )


    $server = $fakeBoundParameter['SqlInstance']

    if (-not $server) {
        $server = $fakeBoundParameter['Source']
    }

    if (-not $server) {
        $server = $fakeBoundParameter['ComputerName']
    }

    if (-not $server) { return }

    try {
        [DbaInstanceParameter]$parServer = $server | Select-Object -First 1
    } catch {
        return
    }

    if ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["group"][$parServer.FullSmoName.ToLower()]) {
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["group"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    }

    try {
        $serverObject = Connect-SqlInstance -SqlInstance $parServer -SqlCredential $fakeBoundParameter['SqlCredential'] -ErrorAction Stop
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["group"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    } catch {
        return
    }
}

Register-DbaTeppScriptblock -ScriptBlock $ScriptBlock -Name Group
#endregion Tepp Data return

#region Update Cache
$ScriptBlock = {

    $cms = New-Object Microsoft.SqlServer.Management.RegisteredServers.RegisteredServersStore($server.ConnectionContext.SqlConnectionObject)
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["group"][$FullSmoName] = $cms.DatabaseEngineServerGroup.ServerGroups.Name
}
Register-DbaTeppInstanceCacheBuilder -ScriptBlock $ScriptBlock
#endregion Update Cache

tools\dbatools\internal\dynamicparams\instanceproperty.ps1

#region Initialize Cache
if (-not [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["instanceproperty"]) {
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["instanceproperty"] = @{ }
}
#endregion Initialize Cache

#region Tepp Data return
$ScriptBlock = {
    param (
        $commandName,

        $parameterName,

        $wordToComplete,

        $commandAst,

        $fakeBoundParameter
    )


    $server = $fakeBoundParameter['SqlInstance']

    if (-not $server) {
        $server = $fakeBoundParameter['Source']
    }

    if (-not $server) {
        $server = $fakeBoundParameter['ComputerName']
    }

    if (-not $server) { return }

    try {
        [DbaInstanceParameter]$parServer = $server | Select-Object -First 1
    } catch {
        return
    }

    if ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["instanceproperty"][$parServer.FullSmoName.ToLower()]) {
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["instanceproperty"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    }

    try {
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["instanceproperty"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    } catch {
        return
    }
}

Register-DbaTeppScriptblock -ScriptBlock $ScriptBlock -Name InstanceProperty
#endregion Tepp Data return

#region Update Cache
$ScriptBlock = {
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["instanceproperty"][$FullSmoName] = $server.Information.Properties.Name + $server.UserOptions.Properties.Name + $server.Settings.Properties.Name
}
Register-DbaTeppInstanceCacheBuilder -ScriptBlock $ScriptBlock
#endregion Update Cache

tools\dbatools\internal\dynamicparams\job.ps1

#region Initialize Cache
if (-not [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["job"]) {
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["job"] = @{ }
}
#endregion Initialize Cache

#region Tepp Data return
$ScriptBlock = {
    param (
        $commandName,
        $parameterName,
        $wordToComplete,
        $commandAst,
        $fakeBoundParameter
    )


    $server = $fakeBoundParameter['SqlInstance']

    if (-not $server) {
        $server = $fakeBoundParameter['Source']
    }

    if (-not $server) {
        $server = $fakeBoundParameter['ComputerName']
    }

    if (-not $server) { return }

    try {
        [DbaInstanceParameter]$parServer = $server | Select-Object -First 1
    } catch {
        return
    }

    if ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["job"][$parServer.FullSmoName.ToLower()]) {
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["job"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    }

    try {
        $serverObject = Connect-SqlInstance -SqlInstance $parServer -SqlCredential $fakeBoundParameter['SqlCredential'] -ErrorAction Stop
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["job"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    } catch {
        return
    }
}

Register-DbaTeppScriptblock -ScriptBlock $ScriptBlock -Name Job
#endregion Tepp Data return

#region Update Cache
$ScriptBlock = {
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["job"][$FullSmoName] = $server.JobServer.Jobs.Name
}
Register-DbaTeppInstanceCacheBuilder -ScriptBlock $ScriptBlock
#endregion Update Cache

tools\dbatools\internal\dynamicparams\jobcategory.ps1

#region Initialize Cache
if (-not [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["jobcategory"]) {
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["jobcategory"] = @{ }
}
#endregion Initialize Cache

#region Tepp Data return
$ScriptBlock = {
    param (
        $commandName,

        $parameterName,

        $wordToComplete,

        $commandAst,

        $fakeBoundParameter
    )


    $server = $fakeBoundParameter['SqlInstance']

    if (-not $server) {
        $server = $fakeBoundParameter['Source']
    }

    if (-not $server) {
        $server = $fakeBoundParameter['ComputerName']
    }

    if (-not $server) { return }

    try {
        [DbaInstanceParameter]$parServer = $server | Select-Object -First 1
    } catch {
        return
    }

    if ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["jobcategory"][$parServer.FullSmoName.ToLower()]) {
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["jobcategory"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    }

    try {
        $serverObject = Connect-SqlInstance -SqlInstance $parServer -SqlCredential $fakeBoundParameter['SqlCredential'] -ErrorAction Stop
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["jobcategory"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    } catch {
        return
    }
}

Register-DbaTeppScriptblock -ScriptBlock $ScriptBlock -Name JobCategory
#endregion Tepp Data return

#region Update Cache
$ScriptBlock = {

    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["jobcategory"][$FullSmoName] = $server.JobServer.JobCategories.Name
}
Register-DbaTeppInstanceCacheBuilder -ScriptBlock $ScriptBlock
#endregion Update Cache

tools\dbatools\internal\dynamicparams\config.ps1

#region Tepp Data return: FullName
$ScriptBlock = {
    param (
        $commandName,

        $parameterName,

        $wordToComplete,

        $commandAst,

        $fakeBoundParameter
    )


    foreach ($name in ([Sqlcollaborative.Dbatools.Configuration.ConfigurationHost]::Configurations.Values | Where-Object { -not $_.Hidden -and ($_.FullName -Like "$wordToComplete*") } | Select-Object -ExpandProperty FullName | Sort-Object)) {
        New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
    }
}

Register-DbaTeppScriptblock -ScriptBlock $ScriptBlock -Name config
#endregion Tepp Data return: FullName

#region Tepp Data return: Name
$ScriptBlock = {
    param (
        $commandName,

        $parameterName,

        $wordToComplete,

        $commandAst,

        $fakeBoundParameter
    )


    $moduleName = "*"
    if ($fakeBoundParameter.Module) { $moduleName = $fakeBoundParameter.Module }

    foreach ($name in ([Sqlcollaborative.Dbatools.Configuration.ConfigurationHost]::Configurations.Values | Where-Object { (-not $_.Hidden) -and ($_.Name -Like "$wordToComplete*") -and ($_.Module -like $moduleName) } | Select-Object -ExpandProperty Name | Sort-Object)) {
        New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
    }
}

Register-DbaTeppScriptblock -ScriptBlock $ScriptBlock -Name config_name
#endregion Tepp Data return: Name

#region Tepp Data return: Module
$ScriptBlock = {
    param (
        $commandName,

        $parameterName,

        $wordToComplete,

        $commandAst,

        $fakeBoundParameter
    )


    foreach ($name in ([Sqlcollaborative.Dbatools.Configuration.ConfigurationHost]::Configurations.Values.Module | Select-Object -Unique | Where-DbaObject -Like "$wordToComplete*" | Sort-Object )) {
        New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
    }
}

Register-DbaTeppScriptblock -ScriptBlock $ScriptBlock -Name configmodule
#endregion Tepp Data return: Module

tools\dbatools\internal\dynamicparams\configname.ps1

#region Initialize Cache
if (-not [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["configname"]) {
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["configname"] = @{ }
}
#endregion Initialize Cache

#region Tepp Data return
$ScriptBlock = {
    param (
        $commandName,

        $parameterName,

        $wordToComplete,

        $commandAst,

        $fakeBoundParameter
    )


    $server = $fakeBoundParameter['SqlInstance']

    if (-not $server) {
        $server = $fakeBoundParameter['Source']
    }

    if (-not $server) {
        $server = $fakeBoundParameter['ComputerName']
    }

    if (-not $server) { return }

    try {
        [DbaInstanceParameter]$parServer = $server | Select-Object -First 1
    } catch {
        return
    }

    if ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["configname"][$parServer.FullSmoName.ToLower()]) {
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["configname"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    }

    try {
        $serverObject = Connect-SqlInstance -SqlInstance $parServer -SqlCredential $fakeBoundParameter['SqlCredential'] -ErrorAction Stop
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["configname"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    } catch {
        return
    }
}

Register-DbaTeppScriptblock -ScriptBlock $ScriptBlock -Name ConfigName
#endregion Tepp Data return

#region Update Cache
$ScriptBlock = {

    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["configname"][$FullSmoName] = (Get-Member -InputObject $server.Configuration -MemberType Property -Force | Where-Object Name -NotIn 'Parent',
        'Properties').Name
}
Register-DbaTeppInstanceCacheBuilder -ScriptBlock $ScriptBlock
#endregion Update Cache

tools\dbatools\internal\dynamicparams\servertrigger.ps1

#region Initialize Cache
if (-not [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["servertrigger"]) {
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["servertrigger"] = @{ }
}
#endregion Initialize Cache

#region Tepp Data return
$ScriptBlock = {
    param (
        $commandName,

        $parameterName,

        $wordToComplete,

        $commandAst,

        $fakeBoundParameter
    )


    $server = $fakeBoundParameter['SqlInstance']

    if (-not $server) {
        $server = $fakeBoundParameter['Source']
    }

    if (-not $server) {
        $server = $fakeBoundParameter['ComputerName']
    }

    if (-not $server) { return }

    try {
        [DbaInstanceParameter]$parServer = $server | Select-Object -First 1
    } catch {
        return
    }

    if ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["servertrigger"][$parServer.FullSmoName.ToLower()]) {
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["servertrigger"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    }

    try {
        $serverObject = Connect-SqlInstance -SqlInstance $parServer -SqlCredential $fakeBoundParameter['SqlCredential'] -ErrorAction Stop
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["servertrigger"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    } catch {
        return
    }
}

Register-DbaTeppScriptblock -ScriptBlock $ScriptBlock -Name ServerTrigger
#endregion Tepp Data return

#region Update Cache
$ScriptBlock = {

    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["servertrigger"][$FullSmoName] = $server.Triggers.Name
}
Register-DbaTeppInstanceCacheBuilder -ScriptBlock $ScriptBlock
#endregion Update Cache

tools\dbatools\internal\dynamicparams\session.ps1

#region Initialize Cache
if (-not [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["session"]) {
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["session"] = @{ }
}
#endregion Initialize Cache

#region Tepp Data return
$ScriptBlock = {
    param (
        $commandName,

        $parameterName,

        $wordToComplete,

        $commandAst,

        $fakeBoundParameter
    )


    $server = $fakeBoundParameter['SqlInstance']

    if (-not $server) {
        $server = $fakeBoundParameter['Source']
    }

    if (-not $server) {
        $server = $fakeBoundParameter['ComputerName']
    }

    if (-not $server) { return }

    try {
        [DbaInstanceParameter]$parServer = $server | Select-Object -First 1
    } catch {
        return
    }

    if ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["session"][$parServer.FullSmoName.ToLower()]) {
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["session"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    }

    try {
        $serverObject = Connect-SqlInstance -SqlInstance $parServer -SqlCredential $fakeBoundParameter['SqlCredential'] -ErrorAction Stop
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["session"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    } catch {
        return
    }
}

Register-DbaTeppScriptblock -ScriptBlock $ScriptBlock -Name session
#endregion Tepp Data return

#region Update Cache
$ScriptBlock = {

    $SqlConn = $server.ConnectionContext.SqlConnectionObject
    $SqlStoreConnection = New-Object Microsoft.SqlServer.Management.Sdk.Sfc.SqlStoreConnection $SqlConn
    $XEStore = New-Object  Microsoft.SqlServer.Management.XEvent.XEStore $SqlStoreConnection
    $xesessions = $XEStore.sessions
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["session"][$FullSmoName] = $xesessions.Name
}
Register-DbaTeppInstanceCacheBuilder -ScriptBlock $ScriptBlock
#endregion Update Cache

tools\dbatools\internal\dynamicparams\linkedserver.ps1

#region Initialize Cache
if (-not [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["linkedserver"]) {
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["linkedserver"] = @{ }
}
#endregion Initialize Cache

#region Tepp Data return
$ScriptBlock = {
    param (
        $commandName,

        $parameterName,

        $wordToComplete,

        $commandAst,

        $fakeBoundParameter
    )


    $server = $fakeBoundParameter['SqlInstance']

    if (-not $server) {
        $server = $fakeBoundParameter['Source']
    }

    if (-not $server) {
        $server = $fakeBoundParameter['ComputerName']
    }

    if (-not $server) { return }

    try {
        [DbaInstanceParameter]$parServer = $server | Select-Object -First 1
    } catch {
        return
    }

    if ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["linkedserver"][$parServer.FullSmoName.ToLower()]) {
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["linkedserver"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    }

    try {
        $serverObject = Connect-SqlInstance -SqlInstance $parServer -SqlCredential $fakeBoundParameter['SqlCredential'] -ErrorAction Stop
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["linkedserver"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    } catch {
        return
    }
}

Register-DbaTeppScriptblock -ScriptBlock $ScriptBlock -Name LinkedServer
#endregion Tepp Data return

#region Update Cache
$ScriptBlock = {

    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["linkedserver"][$FullSmoName] = $server.LinkedServers.Name
}
Register-DbaTeppInstanceCacheBuilder -ScriptBlock $ScriptBlock
#endregion Update Cache

tools\dbatools\internal\dynamicparams\login.ps1

#region Initialize Cache
if (-not [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["login"]) {
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["login"] = @{ }
}
#endregion Initialize Cache

#region Tepp Data return
$ScriptBlock = {
    param (
        $commandName,
        $parameterName,
        $wordToComplete,
        $commandAst,
        $fakeBoundParameter
    )


    $server = $fakeBoundParameter['SqlInstance']

    if (-not $server) {
        $server = $fakeBoundParameter['Source']
    }

    if (-not $server) {
        $server = $fakeBoundParameter['ComputerName']
    }

    if (-not $server) { return }

    try {
        [DbaInstanceParameter]$parServer = $server | Select-Object -First 1
    } catch {
        return
    }

    if ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["login"][$parServer.FullSmoName.ToLower()]) {
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["login"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    }

    try {
        $serverObject = Connect-SqlInstance -SqlInstance $parServer -SqlCredential $fakeBoundParameter['SqlCredential'] -ErrorAction Stop
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["login"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    } catch {
        return
    }
}

Register-DbaTeppScriptblock -ScriptBlock $ScriptBlock -Name Login
#endregion Tepp Data return

#region Update Cache
$ScriptBlock = {
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["login"][$FullSmoName] = $server.Logins.Name
}
Register-DbaTeppInstanceCacheBuilder -ScriptBlock $ScriptBlock
#endregion Update Cache

tools\dbatools\internal\dynamicparams\mailaccount.ps1

#region Initialize Cache
if (-not [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["mailaccount"]) {
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["mailaccount"] = @{ }
}
#endregion Initialize Cache

#region Tepp Data return
$ScriptBlock = {
    param (
        $commandName,

        $parameterName,

        $wordToComplete,

        $commandAst,

        $fakeBoundParameter
    )


    $server = $fakeBoundParameter['SqlInstance']

    if (-not $server) {
        $server = $fakeBoundParameter['Source']
    }

    if (-not $server) {
        $server = $fakeBoundParameter['ComputerName']
    }

    if (-not $server) { return }

    try {
        [DbaInstanceParameter]$parServer = $server | Select-Object -First 1
    } catch {
        return
    }

    if ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["mailaccount"][$parServer.FullSmoName.ToLower()]) {
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["mailaccount"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    }

    try {
        $serverObject = Connect-SqlInstance -SqlInstance $parServer -SqlCredential $fakeBoundParameter['SqlCredential'] -ErrorAction Stop
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["mailaccount"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    } catch {
        return
    }
}

Register-DbaTeppScriptblock -ScriptBlock $ScriptBlock -Name MailAccount
#endregion Tepp Data return

#region Update Cache
$ScriptBlock = {

    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["mailaccount"][$FullSmoName] = $server.Mail.Accounts.Name
}
Register-DbaTeppInstanceCacheBuilder -ScriptBlock $ScriptBlock
#endregion Update Cache

tools\dbatools\internal\dynamicparams\mailprofile.ps1

#region Initialize Cache
if (-not [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["mailprofile"]) {
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["mailprofile"] = @{ }
}
#endregion Initialize Cache

#region Tepp Data return
$ScriptBlock = {
    param (
        $commandName,

        $parameterName,

        $wordToComplete,

        $commandAst,

        $fakeBoundParameter
    )


    $server = $fakeBoundParameter['SqlInstance']

    if (-not $server) {
        $server = $fakeBoundParameter['Source']
    }

    if (-not $server) {
        $server = $fakeBoundParameter['ComputerName']
    }

    if (-not $server) { return }

    try {
        [DbaInstanceParameter]$parServer = $server | Select-Object -First 1
    } catch {
        return
    }

    if ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["mailprofile"][$parServer.FullSmoName.ToLower()]) {
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["mailprofile"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    }

    try {
        $serverObject = Connect-SqlInstance -SqlInstance $parServer -SqlCredential $fakeBoundParameter['SqlCredential'] -ErrorAction Stop
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["mailprofile"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    } catch {
        return
    }
}

Register-DbaTeppScriptblock -ScriptBlock $ScriptBlock -Name MailProfile
#endregion Tepp Data return

#region Update Cache
$ScriptBlock = {

    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["mailprofile"][$FullSmoName] = $server.Mail.Profiles.Name
}
Register-DbaTeppInstanceCacheBuilder -ScriptBlock $ScriptBlock
#endregion Update Cache

tools\dbatools\internal\dynamicparams\mailserver.ps1

#region Initialize Cache
if (-not [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["mailserver"]) {
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["mailserver"] = @{ }
}
#endregion Initialize Cache

#region Tepp Data return
$ScriptBlock = {
    param (
        $commandName,

        $parameterName,

        $wordToComplete,

        $commandAst,

        $fakeBoundParameter
    )


    $server = $fakeBoundParameter['SqlInstance']

    if (-not $server) {
        $server = $fakeBoundParameter['Source']
    }

    if (-not $server) {
        $server = $fakeBoundParameter['ComputerName']
    }

    if (-not $server) { return }

    try {
        [DbaInstanceParameter]$parServer = $server | Select-Object -First 1
    } catch {
        return
    }

    if ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["mailserver"][$parServer.FullSmoName.ToLower()]) {
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["mailserver"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    }

    try {
        $serverObject = Connect-SqlInstance -SqlInstance $parServer -SqlCredential $fakeBoundParameter['SqlCredential'] -ErrorAction Stop
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["mailserver"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    } catch {
        return
    }
}

Register-DbaTeppScriptblock -ScriptBlock $ScriptBlock -Name MailServer
#endregion Tepp Data return

#region Update Cache
$ScriptBlock = {

    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["mailserver"][$FullSmoName] = $server.Mail.Accounts.MailServers.Name
}
Register-DbaTeppInstanceCacheBuilder -ScriptBlock $ScriptBlock
#endregion Update Cache

tools\dbatools\internal\dynamicparams\operator.ps1

#region Initialize Cache
if (-not [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["operator"]) {
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["operator"] = @{ }
}
#endregion Initialize Cache

#region Tepp Data return
$ScriptBlock = {
    param (
        $commandName,

        $parameterName,

        $wordToComplete,

        $commandAst,

        $fakeBoundParameter
    )


    $server = $fakeBoundParameter['SqlInstance']

    if (-not $server) {
        $server = $fakeBoundParameter['Source']
    }

    if (-not $server) {
        $server = $fakeBoundParameter['ComputerName']
    }

    if (-not $server) { return }

    try {
        [DbaInstanceParameter]$parServer = $server | Select-Object -First 1
    } catch {
        return
    }

    if ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["operator"][$parServer.FullSmoName.ToLower()]) {
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["operator"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    }

    try {
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["operator"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    } catch {
        return
    }
}

Register-DbaTeppScriptblock -ScriptBlock $ScriptBlock -Name Operator
#endregion Tepp Data return

#region Update Cache
$ScriptBlock = {
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["operator"][$FullSmoName] = $server.JobServer.Operators.Name
}
Register-DbaTeppInstanceCacheBuilder -ScriptBlock $ScriptBlock
#endregion Update Cache

tools\dbatools\internal\dynamicparams\operatorcategory.ps1

#region Initialize Cache
if (-not [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["operatorcategory"]) {
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["operatorcategory"] = @{ }
}
#endregion Initialize Cache

#region Tepp Data return
$ScriptBlock = {
    param (
        $commandName,

        $parameterName,

        $wordToComplete,

        $commandAst,

        $fakeBoundParameter
    )


    $server = $fakeBoundParameter['SqlInstance']

    if (-not $server) {
        $server = $fakeBoundParameter['Source']
    }

    if (-not $server) {
        $server = $fakeBoundParameter['ComputerName']
    }

    if (-not $server) { return }

    try {
        [DbaInstanceParameter]$parServer = $server | Select-Object -First 1
    } catch {
        return
    }

    if ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["operatorcategory"][$parServer.FullSmoName.ToLower()]) {
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["operatorcategory"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    }

    try {
        $serverObject = Connect-SqlInstance -SqlInstance $parServer -SqlCredential $fakeBoundParameter['SqlCredential'] -ErrorAction Stop
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["operatorcategory"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    } catch {
        return
    }
}

Register-DbaTeppScriptblock -ScriptBlock $ScriptBlock -Name OperatorCategory
#endregion Tepp Data return

#region Update Cache
$ScriptBlock = {

    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["operatorcategory"][$FullSmoName] = $server.JobServer.OperatorCategories.Name
}
Register-DbaTeppInstanceCacheBuilder -ScriptBlock $ScriptBlock
#endregion Update Cache

tools\dbatools\internal\dynamicparams\perfmontemplate.ps1

#region Initialize Cache
if (-not [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["perfmontemplate"]) {
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["perfmontemplate"] = @{ }
}
#endregion Initialize Cache

#region Tepp Data return
$ScriptBlock = {
    param (
        $commandName,
        $parameterName,
        $wordToComplete,
        $commandAst,
        $fakeBoundParameter
    )

    $files = (Get-ChildItem "$script:PSModuleRoot\bin\perfmontemplates\collectorsets\*.xml").BaseName
    foreach ($file in $files) {
        "'$file'"
    }
}

Register-DbaTeppScriptblock -ScriptBlock $ScriptBlock -Name perfmontemplate
#endregion Tepp Data return

tools\dbatools\internal\dynamicparams\powerplan.ps1

#region Initialize Cache
if (-not [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["powerplan"]) {
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["powerplan"] = @()
}
#endregion Initialize Cache

#region Tepp Data return
$ScriptBlock = {
    param (
        $commandName,
        $parameterName,
        $wordToComplete,
        $commandAst,
        $fakeBoundParameter
    )


    foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["powerplan"] | Where-DbaObject -Like "$wordToComplete*")) {
        New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
    }
}
Register-DbaTeppScriptblock -ScriptBlock $ScriptBlock -Name "powerplan"
#endregion Tepp Data return

#region Initialize Cache
if (-not [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["powerplan"]) {
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["powerplan"] = 'High Performance', 'Balanced', 'Power saver'
}
#endregion Initialize Cache
Register-DbaTeppScriptblock -ScriptBlock $ScriptBlock -Name powerplan
#endregion Tepp Data return

tools\dbatools\internal\dynamicparams\processHostname.ps1

$scriptBlock = {
    param (
        $commandName,

        $parameterName,

        $wordToComplete,

        $commandAst,

        $fakeBoundParameter
    )


    $server = $fakeBoundParameter['SqlInstance']
    if (-not $server) {
        return
    }
    $sqlCredential = $fakeBoundParameter['SqlCredential']

    try {
        if ($sqlCredential) { $instance = Connect-SqlInstance -SqlInstance $server -ErrorAction Stop }
        else { $instance = Connect-SqlInstance -SqlInstance $server -ErrorAction Stop }

        $instance.EnumProcesses().Host | Select-Object -Unique | Where-DbaObject -Like "$wordToComplete*" | ForEach-Object {
            if (-not ([string]::IsNullOrWhiteSpace($_))) { New-DbaTeppCompletionResult -CompletionText $_ -ToolTip $_ }
        }
    } catch {
        return
    } finally {
    }
}

Register-DbaTeppScriptblock -ScriptBlock $scriptBlock -Name processhostname

tools\dbatools\internal\dynamicparams\processProgram.ps1

$scriptBlock = {
    param (
        $commandName,

        $parameterName,

        $wordToComplete,

        $commandAst,

        $fakeBoundParameter
    )


    $server = $fakeBoundParameter['SqlInstance']
    if (-not $server) {
        return
    }
    $sqlCredential = $fakeBoundParameter['SqlCredential']

    try {
        if ($sqlCredential) { $instance = Connect-SqlInstance -SqlInstance $server -ErrorAction Stop  }
        else { $instance = Connect-SqlInstance -SqlInstance $server -ErrorAction Stop }

        $instance.EnumProcesses().Program | Select-Object -Unique | Where-DbaObject -Like "$wordToComplete*" | ForEach-Object {
            if (-not ([string]::IsNullOrWhiteSpace($_))) { New-DbaTeppCompletionResult -CompletionText $_ -ToolTip $_ }
        }
    } catch {
        return
    } finally {
    }
}

Register-DbaTeppScriptblock -ScriptBlock $scriptBlock -Name processprogram

tools\dbatools\internal\dynamicparams\processSpid.ps1

$scriptBlock = {
    param (
        $commandName,

        $parameterName,

        $wordToComplete,

        $commandAst,

        $fakeBoundParameter
    )


    $server = $fakeBoundParameter['SqlInstance']
    if (-not $server) {
        return
    }
    $sqlCredential = $fakeBoundParameter['SqlCredential']

    try {
        if ($sqlCredential) { $instance = Connect-SqlInstance -SqlInstance $server -ErrorAction Stop }
        else { $instance = Connect-SqlInstance -SqlInstance $server -ErrorAction Stop }

        $instance.EnumProcesses().Spid | Select-Object -Unique | Where-DbaObject -Like "$wordToComplete*" | ForEach-Object {
            if (-not ([string]::IsNullOrWhiteSpace($_))) { New-DbaTeppCompletionResult -CompletionText $_ -ToolTip $_ }
        }
    } catch {
        return
    } finally {
    }
}

Register-DbaTeppScriptblock -ScriptBlock $scriptBlock -Name processspid

tools\dbatools\internal\dynamicparams\proxyaccount.ps1

#region Initialize Cache
if (-not [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["proxyaccount"]) {
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["proxyaccount"] = @{ }
}
#endregion Initialize Cache

#region Tepp Data return
$ScriptBlock = {
    param (
        $commandName,

        $parameterName,

        $wordToComplete,

        $commandAst,

        $fakeBoundParameter
    )


    $server = $fakeBoundParameter['SqlInstance']

    if (-not $server) {
        $server = $fakeBoundParameter['Source']
    }

    if (-not $server) {
        $server = $fakeBoundParameter['ComputerName']
    }

    if (-not $server) { return }

    try {
        [DbaInstanceParameter]$parServer = $server | Select-Object -First 1
    } catch {
        return
    }

    if ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["proxyaccount"][$parServer.FullSmoName.ToLower()]) {
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["proxyaccount"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    }

    try {
        $serverObject = Connect-SqlInstance -SqlInstance $parServer -SqlCredential $fakeBoundParameter['SqlCredential'] -ErrorAction Stop
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["proxyaccount"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    } catch {
        return
    }
}

Register-DbaTeppScriptblock -ScriptBlock $ScriptBlock -Name ProxyAccount
#endregion Tepp Data return

#region Update Cache
$ScriptBlock = {

    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["proxyaccount"][$FullSmoName] = $server.JobServer.ProxyAccounts.Name
}
Register-DbaTeppInstanceCacheBuilder -ScriptBlock $ScriptBlock
#endregion Update Cache

tools\dbatools\internal\dynamicparams\resourcepool.ps1

#region Initialize Cache
if (-not [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["resourcepool"]) {
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["resourcepool"] = @{ }
}
#endregion Initialize Cache

#region Tepp Data return
$ScriptBlock = {
    param (
        $commandName,

        $parameterName,

        $wordToComplete,

        $commandAst,

        $fakeBoundParameter
    )


    $server = $fakeBoundParameter['SqlInstance']

    if (-not $server) {
        $server = $fakeBoundParameter['Source']
    }

    if (-not $server) {
        $server = $fakeBoundParameter['ComputerName']
    }

    if (-not $server) { return }

    try {
        [DbaInstanceParameter]$parServer = $server | Select-Object -First 1
    } catch {
        return
    }

    if ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["resourcepool"][$parServer.FullSmoName.ToLower()]) {
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["resourcepool"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    }

    try {
        $serverObject = Connect-SqlInstance -SqlInstance $parServer -SqlCredential $fakeBoundParameter['SqlCredential'] -ErrorAction Stop
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["resourcepool"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    } catch {
        return
    }
}

Register-DbaTeppScriptblock -ScriptBlock $ScriptBlock -Name ResourcePool
#endregion Tepp Data return

#region Update Cache
$ScriptBlock = {

    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["resourcepool"][$FullSmoName] = ($server.ResourceGovernor.ResourcePools | Where-Object Name -NotIn 'internal', 'default').Name
}
Register-DbaTeppInstanceCacheBuilder -ScriptBlock $ScriptBlock
#endregion Update Cache

tools\dbatools\internal\dynamicparams\schedule.ps1

#region Initialize Cache
if (-not [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["schedule"]) {
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["schedule"] = @{ }
}
#endregion Initialize Cache

#region Tepp Data return
$ScriptBlock = {
    param (
        $commandName,

        $parameterName,

        $wordToComplete,

        $commandAst,

        $fakeBoundParameter
    )


    $server = $fakeBoundParameter['SqlInstance']

    if (-not $server) {
        $server = $fakeBoundParameter['Source']
    }

    if (-not $server) {
        $server = $fakeBoundParameter['ComputerName']
    }

    if (-not $server) { return }

    try {
        [DbaInstanceParameter]$parServer = $server | Select-Object -First 1
    } catch {
        return
    }

    if ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["schedule"][$parServer.FullSmoName.ToLower()]) {
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["schedule"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    }

    try {
        $serverObject = Connect-SqlInstance -SqlInstance $parServer -SqlCredential $fakeBoundParameter['SqlCredential'] -ErrorAction Stop
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["schedule"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    } catch {
        return
    }
}

Register-DbaTeppScriptblock -ScriptBlock $ScriptBlock -Name Schedule
#endregion Tepp Data return

#region Update Cache
$ScriptBlock = {

    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["schedule"][$FullSmoName] = $server.JobServer.SharedSchedules.Name
}
Register-DbaTeppInstanceCacheBuilder -ScriptBlock $ScriptBlock
#endregion Update Cache

tools\dbatools\internal\functions\configuration\Write-DbatoolsConfigFile.ps1

function Write-DbatoolsConfigFile
{
<#
    .SYNOPSIS
        Handles config export to file.
    
    .DESCRIPTION
        Handles config export to file.
    
    .PARAMETER Config
        The configuration items to export.
    
    .PARAMETER Path
        The path to export to.
        Needs to point to the specific file to export to.
        Will create the folder structure if needed.
    
    .PARAMETER Replace
        Completely replaces previous file contents.
        By default, it will integrate settings into one coherent configuration file.
    
    .EXAMPLE
        PS C:\> Write-DbatoolsConfigFile -Config $items -Path .\file.json
    
        Exports all settings stored in $items to .\file.json.
        If the file already exists, the new settings will be merged into the existing file.
#>
    [CmdletBinding()]
    Param (
        [Sqlcollaborative.Dbatools.Configuration.Config[]]
        $Config,
        
        [string]
        $Path,
        
        [switch]
        $Replace
    )
    
    begin
    {
        $parent = Split-Path -Path $Path
        if (-not (Test-Path $parent))
        {
            $null = New-Item $parent -ItemType Directory -Force
        }
        
        $data = @{ }
        if ((Test-Path $Path) -and (-not $Replace))
        {
            foreach ($item in (Get-Content -Path $Path -Encoding UTF8 | ConvertFrom-Json))
            {
                $data[$item.FullName] = $item
            }
        }
    }
    process
    {
        foreach ($item in $Config)
        {
            $datum = @{
                Version  = 1
                FullName = $item.FullName
            }
            if ($item.SimpleExport)
            {
                $datum["Data"] = $item.Value
            }
            else
            {
                $persisted = [Sqlcollaborative.Dbatools.Configuration.ConfigurationHost]::ConvertToPersistedValue($item.Value)
                $datum["Value"] = $persisted.PersistedValue
                $datum["Type"] = $persisted.PersistedType
                $datum["Style"] = "default"
            }
            
            $data[$item.FullName] = [pscustomobject]$datum
        }
    }
    end
    {
        $data.Values | ConvertTo-Json | Set-Content -Path $Path -Encoding UTF8 -ErrorAction Stop
    }
}

tools\dbatools\internal\dynamicparams\snapshot.ps1

#region Initialize Cache
if (-not [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["snapshot"]) {
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["snapshot"] = @{ }
}
#endregion Initialize Cache

#region Tepp Data return
$ScriptBlock = {
    param (
        $commandName,

        $parameterName,

        $wordToComplete,

        $commandAst,

        $fakeBoundParameter
    )


    $server = $fakeBoundParameter['SqlInstance']

    if (-not $server) {
        $server = $fakeBoundParameter['Source']
    }

    if (-not $server) {
        $server = $fakeBoundParameter['ComputerName']
    }

    if (-not $server) { return }

    try {
        [DbaInstanceParameter]$parServer = $server | Select-Object -First 1
    } catch {
        return
    }

    if ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["snapshot"][$parServer.FullSmoName.ToLower()]) {
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["snapshot"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    }

    try {
        foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["snapshot"][$parServer.FullSmoName.ToLower()] | Where-DbaObject -Like "$wordToComplete*")) {
            New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
        }
        return
    } catch {
        return
    }
}

Register-DbaTeppScriptblock -ScriptBlock $ScriptBlock -Name snapshot
#endregion Tepp Data return

#region Update Cache
$ScriptBlock = {
    if ($PSVersionTable.PSVersion.Major -ge 4) { [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["snapshot"][$FullSmoName] = $server.Databases.Where( { $_.IsDatabaseSnapShot }).Name }
    else { [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["snapshot"][$FullSmoName] = ($server.Databases | Where-Object IsDatabaseSnapShot).Name }
}
Register-DbaTeppInstanceCacheBuilder -ScriptBlock $ScriptBlock
#endregion Update Cache

tools\dbatools\internal\dynamicparams\sqlinstance.ps1

#region Initialize Cache
if (-not [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["sqlinstance"]) {
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["sqlinstance"] = @()
}
#endregion Initialize Cache

#region Tepp Data return
$ScriptBlock = {
    param (
        $commandName,

        $parameterName,

        $wordToComplete,

        $commandAst,

        $fakeBoundParameter
    )


    foreach ($name in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["sqlinstance"] | Where-DbaObject -Like "$wordToComplete*")) {
        New-DbaTeppCompletionResult -CompletionText $name -ToolTip $name
    }
}
Register-DbaTeppScriptblock -ScriptBlock $ScriptBlock -Name "sqlinstance"
#endregion Tepp Data return

tools\dbatools\internal\dynamicparams\tag.ps1

$ScriptBlock = {
    param (
        $commandName,

        $parameterName,

        $wordToComplete,

        $commandAst,

        $fakeBoundParameter
    )

    # Hack till we get this working
    function New-CompletionResult {
        param ([Parameter(Position = 0, ValueFromPipelineByPropertyName, Mandatory, ValueFromPipeline)]
            [ValidateNotNullOrEmpty()]
            [string]
            $CompletionText,

            [Parameter(Position = 1, ValueFromPipelineByPropertyName)]
            [string]
            $ToolTip,

            [Parameter(Position = 2, ValueFromPipelineByPropertyName)]
            [string]
            $ListItemText,

            [System.Management.Automation.CompletionResultType]
            $CompletionResultType = [System.Management.Automation.CompletionResultType]::ParameterValue,

            [switch]
            $NoQuotes = $false
        )

        process {
            $toolTipToUse = if ($ToolTip -eq '') { $CompletionText }
            else { $ToolTip }
            $listItemToUse = if ($ListItemText -eq '') { $CompletionText }
            else { $ListItemText }

            # If the caller explicitly requests that quotes
            # not be included, via the -NoQuotes parameter,
            # then skip adding quotes.

            if ($CompletionResultType -eq [System.Management.Automation.CompletionResultType]::ParameterValue -and -not $NoQuotes) {
                # Add single quotes for the caller in case they are needed.
                # We use the parser to robustly determine how it will treat
                # the argument.  If we end up with too many tokens, or if
                # the parser found something expandable in the results, we
                # know quotes are needed.

                $tokens = $null
                $null = [System.Management.Automation.Language.Parser]::ParseInput("echo $CompletionText", [ref]$tokens, [ref]$null)
                if ($tokens.Length -ne 3 -or
                    ($tokens[1] -is [System.Management.Automation.Language.StringExpandableToken] -and
                        $tokens[1].Kind -eq [System.Management.Automation.Language.TokenKind]::Generic)) {
                    $CompletionText = "'$CompletionText'"
                }
            }
            return New-Object System.Management.Automation.CompletionResult `
            ($CompletionText, $listItemToUse, $CompletionResultType, $toolTipToUse.Trim())
        }

    }

    $moduledirectory = (Get-Module -Name dbatools).ModuleBase
    $idxfile = "$moduledirectory\bin\dbatools-index.json"
    $json = Get-Content $idxfile | ConvertFrom-Json
    $cleantags = @()
    $tags = $json.Tags

    foreach ($tag in $tags) {
        if ($null -ne $tag) {
            $cleantags += $tag.Trim()
        }
    }

    $collection = $cleantags | Select-Object -Unique

    if ($collection) {
        foreach ($item in $collection) {
            New-CompletionResult -CompletionText $item -ToolTip $item
        }
    }
}

Register-DbaTeppScriptblock -ScriptBlock $ScriptBlock -Name "tag"

tools\dbatools\internal\dynamicparams\xesessiontemplate.ps1

#region Initialize Cache
if (-not [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["xesessiontemplate"]) {
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["xesessiontemplate"] = @{ }
}
#endregion Initialize Cache

#region Tepp Data return
$ScriptBlock = {
    param (
        $commandName,
        $parameterName,
        $wordToComplete,
        $commandAst,
        $fakeBoundParameter
    )

    $files = (Get-ChildItem "$script:PSModuleRoot\bin\xetemplates\*.xml").BaseName
    foreach ($file in $files) {
        "'$file'"
    }
}

Register-DbaTeppScriptblock -ScriptBlock $ScriptBlock -Name xesessiontemplate
#endregion Tepp Data return

tools\dbatools\internal\functions\configuration\Read-DbatoolsConfigFile.ps1

function Read-DbatoolsConfigFile
{
<#
    .SYNOPSIS
        Reads a configuration file and parses it.
    
    .DESCRIPTION
        Reads a configuration file and parses it.
    
    .PARAMETER Path
        The path to the file to parse.
    
    .PARAMETER WebLink
        The link to a website to download straight as raw json.
    
    .PARAMETER RawJson
        Raw json data to interpret.
    
    .EXAMPLE
        PS C:\> Read-DbatoolsConfigFile -Path config.json
    
        Reads the config.json file and returns interpreted configuration objects.
#>
    [CmdletBinding()]
    param (
        [Parameter(Mandatory = $true, ParameterSetName = 'Path')]
        [string]
        $Path,
        
        [Parameter(Mandatory = $true, ParameterSetName = 'Weblink')]
        [string]
        $Weblink,
        
        [Parameter(Mandatory = $true, ParameterSetName = 'RawJson')]
        [string]
        $RawJson
    )
    
    #region Utility Function
    function New-ConfigItem
    {
        [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseShouldProcessForStateChangingFunctions", "")]
        [CmdletBinding()]
        param (
            $FullName,
            
            $Value,
            
            $Type,
            
            [switch]
            $KeepPersisted,
            
            [switch]
            $Enforced,
            
            [switch]
            $Policy
        )
        
        [pscustomobject]@{
            FullName        = $FullName
            Value            = $Value
            Type            = $Type
            KeepPersisted   = $KeepPersisted
            Enforced        = $Enforced
            Policy            = $Policy
        }
    }
    
    function Get-WebContent
    {
        [CmdletBinding()]
        param (
            [string]
            $WebLink
        )
        
        $webClient = New-Object System.Net.WebClient
        $webClient.Encoding = [System.Text.Encoding]::UTF8
        $webClient.DownloadString($WebLink)
    }
    #endregion Utility Function
    
    if ($Path)
    {
        if (-not (Test-Path $Path)) { return }
        $data = Get-Content -Path $Path -Encoding UTF8 | ConvertFrom-Json -ErrorAction Stop
    }
    if ($Weblink)
    {
        $data = Get-WebContent -WebLink $Weblink | ConvertFrom-Json -ErrorAction Stop
    }
    if ($RawJson)
    {
        $data = $RawJson | ConvertFrom-Json -ErrorAction Stop
    }
    
    foreach ($item in $data)
    {
        #region No Version
        if (-not $item.Version)
        {
            New-ConfigItem -FullName $item.FullName -Value ([Sqlcollaborative.Dbatools.Configuration.ConfigurationHost]::ConvertFromPersistedValue($item.Value, $item.Type))
        }
        #endregion No Version
        
        #region Version One
        if ($item.Version -eq 1)
        {
            if ((-not $item.Style) -or ($item.Style -eq "Simple")) { New-ConfigItem -FullName $item.FullName -Value $item.Data }
            else
            {
                if (($item.Type -eq "Object") -or ($item.Type -eq 12))
                {
                    New-ConfigItem -FullName $item.FullName -Value $item.Value -Type "Object" -KeepPersisted
                }
                else
                {
                    New-ConfigItem -FullName $item.FullName -Value ([Sqlcollaborative.Dbatools.Configuration.ConfigurationHost]::ConvertFromPersistedValue($item.Value, $item.Type))
                }
            }
        }
        #endregion Version One
    }
}

tools\dbatools\internal\functions\configuration\Read-DbatoolsConfigPersisted.ps1

function Read-DbatoolsConfigPersisted
{
<#
    .SYNOPSIS
        Reads configurations from persisted file / registry.
    
    .DESCRIPTION
        Reads configurations from persisted file / registry.
    
    .PARAMETER Scope
        Where to read from.
    
    .PARAMETER Module
        Load module specific data.
        Use this to load on-demand configuration only when the module is imported.
        Useful when using the config system as cache.
    
    .PARAMETER ModuleVersion
        The configuration version of the module-settings to load.
    
    .PARAMETER Hashtable
        Rather than returning results, insert them into this hashtable.
    
    .PARAMETER Default
        When inserting into a hashtable, existing values are overwritten by default.
        Enabling this setting will cause it to only insert values if the key does not exist yet.
    
    .EXAMPLE
        Read-DbatoolsConfigPersisted -Scope 127
    
        Read all persisted default configuration items in the default mandated order.
#>
    [OutputType([System.Collections.Hashtable])]
    [CmdletBinding()]
    Param (
        [Sqlcollaborative.Dbatools.Configuration.ConfigScope]
        $Scope,
        
        [string]
        $Module,
        
        [int]
        $ModuleVersion = 1,
        
        [System.Collections.Hashtable]
        $Hashtable,
        
        [switch]
        $Default
    )
    
    begin
    {
        #region Helper Functions
        function New-ConfigItem
        {
            [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseShouldProcessForStateChangingFunctions", "")]
            [CmdletBinding()]
            param (
                $FullName,
                
                $Value,
                
                $Type,
                
                [switch]
                $KeepPersisted,
                
                [switch]
                $Enforced,
                
                [switch]
                $Policy
            )
            
            [pscustomobject]@{
                FullName      = $FullName
                Value         = $Value
                Type          = $Type
                KeepPersisted = $KeepPersisted
                Enforced      = $Enforced
                Policy        = $Policy
            }
        }
        
        function Read-Registry
        {
            [CmdletBinding()]
            param (
                $Path,
                
                [switch]
                $Enforced
            )
            
            if (-not (Test-Path $Path)) { return }
            
            $common = 'PSPath', 'PSParentPath', 'PSChildName', 'PSDrive', 'PSProvider'
            
            foreach ($item in ((Get-ItemProperty -Path $Path -ErrorAction Ignore).PSObject.Properties | Where-Object Name -NotIn $common))
            {
                if ($item.Value -like "Object:*")
                {
                    $data = $item.Value.Split(":", 2)
                    New-ConfigItem -FullName $item.Name -Type $data[0] -Value $data[1] -KeepPersisted -Enforced:$Enforced -Policy
                }
                else
                {
                    try { New-ConfigItem -FullName $item.Name -Value ([Sqlcollaborative.Dbatools.Configuration.ConfigurationHost]::ConvertFromPersistedValue($item.Value)) -Policy }
                    catch
                    {
                        Write-Message -Level Warning -Message "Failed to load configuration from Registry: $($item.Name)" -ErrorRecord $_ -Target "$Path : $($item.Name)"
                    }
                }
            }
        }
        #endregion Helper Functions
        
        if (-not $Hashtable) { $results = @{ } }
        else { $results = $Hashtable }
        
        if ($Module) { $filename = "$($Module.ToLower())-$($ModuleVersion).json" }
        else { $filename = "psf_config.json" }
    }
    process
    {
        #region File - Computer Wide
        if ($Scope -band 64)
        {
            foreach ($item in (Read-DbatoolsConfigFile -Path (Join-Path $script:path_FileSystem $filename)))
            {
                if (-not $Default) { $results[$item.FullName] = $item }
                elseif (-not $results.ContainsKey($item.FullName)) { $results[$item.FullName] = $item }
            }
        }
        #endregion File - Computer Wide
        
        #region Registry - Computer Wide
        if (($Scope -band 4) -and (-not $script:NoRegistry))
        {
            foreach ($item in (Read-Registry -Path $script:path_RegistryMachineDefault))
            {
                if (-not $Default) { $results[$item.FullName] = $item }
                elseif (-not $results.ContainsKey($item.FullName)) { $results[$item.FullName] = $item }
            }
        }
        #endregion Registry - Computer Wide
        
        #region File - User Shared
        if ($Scope -band 32)
        {
            foreach ($item in (Read-DbatoolsConfigFile -Path (Join-Path $script:path_FileUserShared $filename)))
            {
                if (-not $Default) { $results[$item.FullName] = $item }
                elseif (-not $results.ContainsKey($item.FullName)) { $results[$item.FullName] = $item }
            }
        }
        #endregion File - User Shared
        
        #region Registry - User Shared
        if (($Scope -band 1) -and (-not $script:NoRegistry))
        {
            foreach ($item in (Read-Registry -Path $script:path_RegistryUserDefault))
            {
                if (-not $Default) { $results[$item.FullName] = $item }
                elseif (-not $results.ContainsKey($item.FullName)) { $results[$item.FullName] = $item }
            }
        }
        #endregion Registry - User Shared
        
        #region File - User Local
        if ($Scope -band 16)
        {
            foreach ($item in (Read-DbatoolsConfigFile -Path (Join-Path $script:path_FileUserLocal $filename)))
            {
                if (-not $Default) { $results[$item.FullName] = $item }
                elseif (-not $results.ContainsKey($item.FullName)) { $results[$item.FullName] = $item }
            }
        }
        #endregion File - User Local
        
        #region Registry - User Enforced
        if (($Scope -band 2) -and (-not $script:NoRegistry))
        {
            foreach ($item in (Read-Registry -Path $script:path_RegistryUserEnforced -Enforced))
            {
                if (-not $Default) { $results[$item.FullName] = $item }
                elseif (-not $results.ContainsKey($item.FullName)) { $results[$item.FullName] = $item }
            }
        }
        #endregion Registry - User Enforced
        
        #region Registry - System Enforced
        if (($Scope -band 8) -and (-not $script:NoRegistry))
        {
            foreach ($item in (Read-Registry -Path $script:path_RegistryMachineEnforced -Enforced))
            {
                if (-not $Default) { $results[$item.FullName] = $item }
                elseif (-not $results.ContainsKey($item.FullName)) { $results[$item.FullName] = $item }
            }
        }
        #endregion Registry - System Enforced
    }
    end
    {
        $results
    }
}

tools\dbatools\internal\functions\configuration\Register-DbatoolsConfigValidation.ps1

function Register-DbatoolsConfigValidation {
    <#
        .SYNOPSIS
            Registers a validation scriptblock for use with the configuration system.

        .DESCRIPTION
            Registers a validation scriptblock for use with the configuration system.

            The scriptblock must be designed according to a few guidelines:
            - It must not throw exceptions
            - It must accept a single parameter (the value to be tested)
            - It must return an object with three properties: 'Message', 'Value' and 'Success'.
            The Success property should be boolean and indicate whether the value is valid.
            The Value property contains the validated input. The scriptblock may legally convert the input (For example from string to int in case of integer validation)
            The message contains a string that will be passed along to an exception in case the input is NOT valid.

        .PARAMETER Name
            The name under which to register the validation scriptblock

        .PARAMETER ScriptBlock
            The scriptblock to register

        .EXAMPLE
            PS C:\> Register-DbatoolsConfigValidation -Name IntPositive -ScriptBlock $scriptblock

            Registers the scriptblock stored in $scriptblock as validation with the name IntPositive
       #>
    [CmdletBinding()]
    param (
        [Parameter(Mandatory)]
        [string]
        $Name,

        [Parameter(Mandatory)]
        [ScriptBlock]
        $ScriptBlock
    )

    [Sqlcollaborative.Dbatools.Configuration.ConfigurationHost]::Validation[$Name.ToLower()] = $ScriptBlock
}

tools\dbatools\internal\functions\Connect-AsServer.ps1

function Connect-AsServer {
    <#
.SYNOPSIS
Internal function that creates SMO server object.

.DESCRIPTION
Internal function that creates SMO server object.

.PARAMETER AsServer
Analysis Server

.PARAMETER ParameterConnection
Shorten the timeout

.NOTES
Website: https://dbatools.io
Copyright: (c) 2018 by dbatools, licensed under MIT
License: MIT https://opensource.org/licenses/MIT

.EXAMPLE
Connect-AsServer -AsServer localhost
Connects to SSAS on the local server

    #>
    [CmdletBinding()]
    param (
        [Parameter(Mandatory)]
        [object]$AsServer,
        [switch]$ParameterConnection
    )

    if ($AsServer.GetType() -eq [Microsoft.AnalysisServices.Server]) {

        if ($ParameterConnection) {
            $paramserver = New-Object Microsoft.AnalysisServices.Server
            $paramserver.Connect("Data Source=$($AsServer.Name);Connect Timeout=2")
            return $paramserver
        }

        if ($AsServer.Connected -eq $false) { $AsServer.Connect("Data Source=$($AsServer.Name);Connect Timeout=3") }
        return $AsServer
    }

    $server = New-Object Microsoft.AnalysisServices.Server

    try {
        if ($ParameterConnection) {
            $server.Connect("Data Source=$AsServer;Connect Timeout=2")
        } else { $server.Connect("Data Source=$AsServer;Connect Timeout=3") }
    } catch {
        $message = $_.Exception.InnerException
        $message = $message.ToString()
        $message = ($message -Split '-->')[0]
        $message = ($message -Split 'at System.Data.SqlClient')[0]
        $message = ($message -Split 'at System.Data.ProviderBase')[0]
        throw "Can't connect to $asserver`: $message "
    }

    return $server
}

tools\dbatools\internal\functions\Connect-ReplicationDB.ps1

#Helper Function
function Connect-ReplicationDB {
    param (
        [object]$Server,
        [object]$Database
    )

    $repDB = New-Object Microsoft.SqlServer.Replication.ReplicationDatabase

    $repDB.Name = $Database.Name
    $repDB.ConnectionContext = $Server.ConnectionContext.SqlConnectionObject

    if (!$repDB.LoadProperties()) {
        Write-Message -Level Verbose -Message "Skipping $($Database.Name). Failed to load properties correctly."
    }

    return $repDB
}

tools\dbatools\internal\functions\flowcontrol\Test-Windows.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Test-Windows {
    <#
        .SYNOPSIS
            Internal tool, used to detect non-Windows platforms

        .DESCRIPTION
            Some things don't work with Windows, this is an easy way to detect

        .EXAMPLE
            if (-not (Test-Windows)) { return }

            The calling function will stop if this function returns true.
    #>
    [CmdletBinding()]
    param (
        [switch]$NoWarn
    )

    if (($PSVersionTable.Keys -contains "Platform") -and $psversiontable.Platform -ne "Win32NT") {
        if (-not $NoWarn) {
            Write-Message -Level Warning -Message "This command is not supported on non-Windows platforms :("
        }
        return $false
    }

    return $true
}

tools\dbatools\internal\functions\Get-BackupAncientHistory.ps1

function Get-BackupAncientHistory {
    <#
        .SYNOPSIS
            Returns details of the last full backup of a SQL Server 2000 database

        .DESCRIPTION
            Backup History command to pull limited history from a SQL 2000 instance. If not using SQL 2000, please use Get-DbaBackupHistory which pulls more infomation, and has more options. This is just here to cope with 2k and copy-DbaDatabase issues

        .PARAMETER SqlInstance
            SQL Server name or SMO object representing the SQL Server to connect to. This can be a collection and receive pipeline input to allow the function to be executed against multiple SQL Server instances.

        .PARAMETER Credential
            Credential object used to connect to the SQL Server Instance as a different user. This can be a Windows or SQL Server account. Windows users are determined by the existence of a backslash, so if you are intending to use an alternative Windows connection instead of a SQL login, ensure it contains a backslash.

        .PARAMETER Database
            Specifies one or more database(s) to process. If unspecified, all databases will be processed.

        .NOTES
        Author: Stuart Moore (@napalmgram), stuart-moore.com

        dbatools PowerShell module (https://dbatools.io, [email protected])
       Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

       #>
    [CmdletBinding(DefaultParameterSetName = "Default")]
    param (
        [parameter(Mandatory)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter]$SqlInstance,
        [Alias("Credential")]
        [PsCredential]$SqlCredential,
        [Alias("Databases")]
        [object[]]$Database,
        [string]$FileNameStub,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {
        try {
            $server = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential
        } catch {
            Stop-Function -Message "Failed to process Instance $SqlInstance." -InnerErrorRecord $_ -Target $SqlInstance -Continue
        }
        if ($server.SoftwareVersionMajor -gt 8) {
            Write-Message -Level Warning -Message "This is not the function you're looking for. This is for SQL 2000 only, please use Get-DbaBackupHistory instead. It's much nicer"
        }

        $databases = @()
        if ($null -ne $Database) {
            ForEach ($db in $Database) {
                $databases += [PScustomObject]@{name = $db}
            }
        } else {
            $databases = $server.Databases
        }
    }

    process {
        foreach ($db in $Database) {
            Write-Message -Level Verbose -Message "Processing database $db"
            $sql = "
            SELECT
            a.Server,
             a.[Database],
             a.Username,
             a.Start,
             a.[End],
             a.Duration,
             a.[Path],
             a.Type,
            NULL as TotalSize,
             a.MediaSetId,
             a.BackupSetID,
             a.Software,
              a.position,
              a.first_lsn,
              a.database_backup_lsn,
              a.checkpoint_lsn,
              a.last_lsn,
             a.first_lsn as 'FirstLSN',
              a.database_backup_lsn as 'DatabaseBackupLsn',
              a.checkpoint_lsn as 'CheckpointLsn',
              a.last_lsn as 'Lastlsn',
              a.software_major_version,
             a.DeviceType,
                NULL as is_copy_only,
            NULL as last_recovery_fork_guid
            FROM (
            SELECT
              backupset.database_name AS [Database],
              backupset.user_name AS Username,
              backupset.backup_start_date AS Start,
              backupset.server_name as [Server],
              backupset.backup_finish_date AS [End],
              DATEDIFF(SECOND, backupset.backup_start_date, backupset.backup_finish_date) AS Duration,
              mediafamily.physical_device_name AS Path,
              CASE backupset.type
             WHEN 'L' THEN 'Log'
             WHEN 'D' THEN 'Full'
             WHEN 'F' THEN 'File'
             WHEN 'I' THEN 'Differential'
             WHEN 'G' THEN 'Differential File'
             WHEN 'P' THEN 'Partial Full'
             WHEN 'Q' THEN 'Partial Differential'
             ELSE NULL
              END AS Type,
              backupset.media_set_id AS MediaSetId,
              mediafamily.media_family_id as mediafamilyid,
              backupset.backup_set_id as BackupSetID,
              CASE mediafamily.device_type
             WHEN 2 THEN 'Disk'
             WHEN 102 THEN 'Permanent Disk Device'
             WHEN 5 THEN 'Tape'
             WHEN 105 THEN 'Permanent Tape Device'
             WHEN 6 THEN 'Pipe'
             WHEN 106 THEN 'Permanent Pipe Device'
             WHEN 7 THEN 'Virtual Device'
             ELSE 'Unknown'
             END AS DeviceType,
              backupset.position,
              backupset.first_lsn,
              backupset.database_backup_lsn,
              backupset.checkpoint_lsn,
              backupset.last_lsn,
              backupset.software_major_version,
              mediaset.software_name AS Software
            FROM msdb..backupmediafamily AS mediafamily
            JOIN msdb..backupmediaset AS mediaset
              ON mediafamily.media_set_id = mediaset.media_set_id
            JOIN msdb..backupset AS backupset
              ON backupset.media_set_id = mediaset.media_set_id
            WHERE backupset.database_name = '$db'
                    ) AS a
            where  a.backupsetid in (Select max(backup_set_id) from msdb..backupset where database_name='$db')"
            Write-Message -Level Debug -Message $sql
            $results = $server.ConnectionContext.ExecuteWithResults($sql).Tables.Rows | Select-Object * -ExcludeProperty BackupSetRank, RowError, Rowstate, table, itemarray, haserrors
            Write-Message -Level SomewhatVerbose -Message "Processing as grouped output."
            $GroupedResults = $results | Group-Object -Property backupsetid
            Write-Message -Level SomewhatVerbose -Message "$($GroupedResults.Count) result-groups found."
            $groupResults = @()
            foreach ($group in $GroupedResults) {

                $fileSql = "select file_type as FileType, logical_name as LogicalName, physical_name as PhysicalName
                            from msdb.dbo.backupfile where backup_set_id='$($Group.group[0].BackupSetID)'"

                Write-Message -Level Debug -Message "FileSQL: $fileSql"

                $historyObject = New-Object Sqlcollaborative.Dbatools.Database.BackupHistory
                $historyObject.ComputerName = $server.ComputerName
                $historyObject.InstanceName = $server.ServiceName
                $historyObject.SqlInstance = $server.DomainInstanceName
                $historyObject.Database = $group.Group[0].Database
                $historyObject.UserName = $group.Group[0].UserName
                $historyObject.Start = ($group.Group.Start | Measure-Object -Minimum).Minimum
                $historyObject.End = ($group.Group.End | Measure-Object -Maximum).Maximum
                $historyObject.Duration = New-TimeSpan -Seconds ($group.Group.Duration | Measure-Object -Maximum).Maximum
                $historyObject.Path = $group.Group.Path
                $historyObject.TotalSize = $NULL
                $historyObject.Type = $group.Group[0].Type
                $historyObject.BackupSetId = $group.Group[0].BackupSetId
                $historyObject.DeviceType = $group.Group[0].DeviceType
                $historyObject.Software = $group.Group[0].Software
                $historyObject.FullName = $group.Group.Path
                $historyObject.FileList = $server.ConnectionContext.ExecuteWithResults($fileSql).Tables.Rows
                $historyObject.Position = $group.Group[0].Position
                $historyObject.FirstLsn = $group.Group[0].First_LSN
                $historyObject.DatabaseBackupLsn = $group.Group[0].database_backup_lsn
                $historyObject.CheckpointLsn = $group.Group[0].checkpoint_lsn
                $historyObject.LastLsn = $group.Group[0].Last_Lsn
                $historyObject.SoftwareVersionMajor = $group.Group[0].Software_Major_Version
                $historyObject.IsCopyOnly = if ($group.Group[0].is_copy_only -eq 1) {
                    $true
                } else {
                    $false
                }
                $groupResults += $historyObject
            }
            $groupResults | Sort-Object -Property LastLsn, Type
        }

    }

    END {}
}

tools\dbatools\internal\functions\Get-DecryptedObject.ps1

function Get-DecryptedObject {
    <#
            .SYNOPSIS
                Internal function.

                This function is heavily based on Antti Rantasaari's script at http://goo.gl/wpqSib
                Antti Rantasaari 2014, NetSPI
                License: BSD 3-Clause http://opensource.org/licenses/BSD-3-Clause
    #>
    param (
        [Parameter(Mandatory)]
        [Microsoft.SqlServer.Management.Smo.Server]$SqlInstance,
        [Parameter(Mandatory)]
        [ValidateSet("LinkedServer", "Credential")]
        [string]$Type,
        [switch]$EnableException
    )

    $server = $SqlInstance
    $sourceName = $server.Name

    # Query Service Master Key from the database - remove padding from the key
    # key_id 102 eq service master key, thumbprint 3 means encrypted with machinekey
    Write-Message -Level Verbose -Message "Querying service master key"
    $sql = "SELECT substring(crypt_property,9,len(crypt_property)-8) as smk FROM sys.key_encryptions WHERE key_id=102 and (thumbprint=0x03 or thumbprint=0x0300000001)"
    try {
        $smkbytes = $server.Query($sql).smk
    } catch {
        Stop-Function -Message "Can't execute query on $sourcename" -Target $server -ErrorRecord $_
        return
    }

    $sourceNetBios = Resolve-NetBiosName $server
    $instance = $server.InstanceName
    $serviceInstanceId = $server.ServiceInstanceId

    Write-Message -Level Verbose -Message "Get entropy from the registry - hopefully finds the right SQL server instance"

    try {
        [byte[]]$entropy = Invoke-Command2 -Raw -Credential $Credential -ComputerName $sourceNetBios -argumentlist $serviceInstanceId {
            $serviceInstanceId = $args[0]
            $entropy = (Get-ItemProperty -Path "HKLM:\SOFTWARE\Microsoft\Microsoft SQL Server\$serviceInstanceId\Security\" -ErrorAction Stop).Entropy
            return $entropy
        }
    } catch {
        Stop-Function -Message "Can't access registry keys on $sourceName. Do you have administrative access to the Windows registry on $SqlInstance Otherwise, we're out of ideas." -Target $source
        return
    }

    Write-Message -Level Verbose -Message "Decrypt the service master key"
    try {
        $serviceKey = Invoke-Command2 -Raw -Credential $Credential -ComputerName $sourceNetBios -ArgumentList $smkbytes, $Entropy {
            Add-Type -AssemblyName System.Security
            Add-Type -AssemblyName System.Core
            $smkbytes = $args[0]; $Entropy = $args[1]
            $serviceKey = [System.Security.Cryptography.ProtectedData]::Unprotect($smkbytes, $Entropy, 'LocalMachine')
            return $serviceKey
        }
    } catch {
        Stop-Function -Message "Can't unprotect registry data on $sourcename. Do you have administrative access to the Windows registry on $sourcename? Otherwise, we're out of ideas." -Target $source
        return
    }

    # Choose the encryption algorithm based on the SMK length - 3DES for 2008, AES for 2012
    # Choose IV length based on the algorithm
    Write-Message -Level Verbose -Message "Choose the encryption algorithm based on the SMK length - 3DES for 2008, AES for 2012"

    if (($serviceKey.Length -ne 16) -and ($serviceKey.Length -ne 32)) {
        Write-Message -Level Verbose -Message "ServiceKey found: $serviceKey.Length"
        Stop-Function -Message "Unknown key size. Do you have administrative access to the Windows registry on $sourcename? Otherwise, we're out of ideas." -Target $source
        return
    }

    if ($serviceKey.Length -eq 16) {
        $decryptor = New-Object System.Security.Cryptography.TripleDESCryptoServiceProvider
        $ivlen = 8
    } elseif ($serviceKey.Length -eq 32) {
        $decryptor = New-Object System.Security.Cryptography.AESCryptoServiceProvider
        $ivlen = 16
    }

    <#
                Query link server password information from the Db.
                Remove header from pwdhash, extract IV (as iv) and ciphertext (as pass)
                Ignore links with blank credentials (integrated auth ?)
            #>

    Write-Message -Level Verbose -Message "Query link server password information from the Db."

    try {
        if (-not $server.IsClustered) {
            $connString = "Server=ADMIN:$sourceNetBios\$instance;Trusted_Connection=True"
        } else {
            $dacEnabled = $server.Configuration.RemoteDacConnectionsEnabled.ConfigValue

            if ($dacEnabled -eq $false) {
                If ($Pscmdlet.ShouldProcess($server.Name, "Enabling DAC on clustered instance.")) {
                    Write-Message -Level Verbose -Message "DAC must be enabled for clusters, even when accessed from active node. Enabling."
                    $server.Configuration.RemoteDacConnectionsEnabled.ConfigValue = $true
                    $server.Configuration.Alter()
                }
            }

            $connString = "Server=ADMIN:$sourceName;Trusted_Connection=True"
        }
    } catch {
        Stop-Function -Message "Failure enabling DAC on $sourcename" -Target $source -ErrorRecord $_
    }

    <# NOTE: This query is accessing syslnklgns table. Can only be done via the DAC connection #>

    $sql = switch ($Type) {
        "LinkedServer" {
            "SELECT sysservers.srvname,
                syslnklgns.Name,
                substring(syslnklgns.pwdhash,5,$ivlen) iv,
                substring(syslnklgns.pwdhash,$($ivlen + 5),
                len(syslnklgns.pwdhash)-$($ivlen + 4)) pass
            FROM master.sys.syslnklgns
                inner join master.sys.sysservers
                on syslnklgns.srvid=sysservers.srvid
            WHERE len(pwdhash) > 0"
        }
        "Credential" {
            "SELECT QUOTENAME(name) AS name,credential_identity,substring(imageval,5,$ivlen) iv, substring(imageval,$($ivlen + 5),len(imageval)-$($ivlen + 4)) pass from sys.Credentials cred inner join sys.sysobjvalues obj on cred.credential_id = obj.objid where valclass=28 and valnum=2"
        }
    }

    Write-Message -Level Debug -Message $sql
    Write-Message -Level Verbose -Message "Get entropy from the registry"

    try {
        $results = Invoke-Command2 -ErrorAction Stop -Raw -Credential $Credential -ComputerName $sourceNetBios -ArgumentList $connString, $sql {
            $connString = $args[0]; $sql = $args[1]
            $conn = New-Object System.Data.SqlClient.SQLConnection($connString)
            $cmd = New-Object System.Data.SqlClient.SqlCommand($sql, $conn)
            $dt = New-Object System.Data.DataTable
            $conn.open()
            $dt.Load($cmd.ExecuteReader())
            $conn.Close()
            $conn.Dispose()
            return $dt
        }
    } catch {
        try {
            $conn.Close()
            $conn.Dispose()
        } catch {
            $null = 1
        }
        Stop-Function -Message "Can't establish local DAC connection on $sourcename." -Target $server -ErrorRecord $_
        return
    }

    if ($server.IsClustered -and $dacEnabled -eq $false) {
        If ($Pscmdlet.ShouldProcess($server.Name, "Disabling DAC on clustered instance.")) {
            try {
                Write-Message -Level Verbose -Message "Setting DAC config back to 0."
                $server.Configuration.RemoteDacConnectionsEnabled.ConfigValue = $false
                $server.Configuration.Alter()
            } catch {
                Stop-Function -Message "Can't establish local DAC connection on $sourcename" -Target $server -ErrorRecord $_
                return
            }
        }
    }

    Write-Message -Level Verbose -Message "Go through each row in results"
    foreach ($result in $results) {
        # decrypt the password using the service master key and the extracted IV
        $decryptor.Padding = "None"
        $decrypt = $decryptor.Createdecryptor($serviceKey, $result.iv)
        $stream = New-Object System.IO.MemoryStream ( , $result.pass)
        $crypto = New-Object System.Security.Cryptography.CryptoStream $stream, $decrypt, "Write"

        $crypto.Write($result.pass, 0, $result.pass.Length)
        [byte[]]$decrypted = $stream.ToArray()

        # convert decrypted password to unicode
        $encode = New-Object System.Text.UnicodeEncoding

        # Print results - removing the weird padding (8 bytes in the front, some bytes at the end)...
        # Might cause problems but so far seems to work.. may be dependant on SQL server version...
        # If problems arise remove the next three lines..
        $i = 8; foreach ($b in $decrypted) { if ($decrypted[$i] -ne 0 -and $decrypted[$i + 1] -ne 0 -or $i -eq $decrypted.Length) { $i -= 1; break; }; $i += 1; }
        $decrypted = $decrypted[8 .. $i]

        if ($Type -eq "LinkedServer") {
            $name = $result.srvname
            $identity = $result.Name
        } else {
            $name = $result.name
            $identity = $result.credential_identity
        }
        [pscustomobject]@{
            Name     = $name
            Identity = $identity
            Password = $encode.GetString($decrypted)
        }
    }
}

tools\dbatools\internal\functions\Get-CodePage.ps1

function Get-CodePage {
    <#
        .SYNOPSIS
            Converts Microsoft's code page ID to human readable format

        .DESCRIPTION
            Converts Microsoft's code page ID to human readable format

        .PARAMETER Id
            The code page ID

        .EXAMPLE
            Get-CodePage 1252

            Returns a pscustomobject with id, alias and name
       #>
    [CmdletBinding()]
    param (
        [int]$id
    )
    process {
        $encoding = [System.Text.Encoding]::GetEncoding($id)
        $IncludeProps = 'CodePage', 'BodyName', 'EncodingName', 'HeaderName', 'WebName', 'IsSingleByte'
        Select-DefaultView -InputObject $encoding -Property $IncludeProps
    }
}

tools\dbatools\internal\functions\Get-DbaADObject.ps1

#ValidationTags#FlowControl,Pipeline#
function Get-DbaADObject {
    <#
    .SYNOPSIS
    Get-DbaADObject tries to facilitate searching AD with dbatools, which ATM can't require AD cmdlets.

    .DESCRIPTION
    As working with multiple domains, forests, ldap filters, partitions, etc is quite hard to grasp, let's try to do "the right thing" here and
    facilitate everybody's work with it. It either returns the exact matched result or None if it isn't found. You can inspect the raw object
    calling GetUnderlyingObject() on the returned object.

    .PARAMETER ADObject
    Pass in both the domain and the login name in Domain\sAMAccountName format (the one everybody is accustomed to)
    You can also pass a UserPrincipalName format (with the correct IdentityType, either with Domain\UserPrincipalName or UserPrincipalName@Domain)
    Beware: the "Domain" part of the UPN *can* be different from the real domain, see "UPN suffixes" (https://msdn.microsoft.com/en-us/library/windows/desktop/aa380525(v=vs.85).aspx)
    It's always best to pass the real domain name in (see the examples)
    For any other format, please beware that the domain part must always be specified (again, for the best result, before the slash)

    .PARAMETER Type
    You *should* always know what you are asking for. Please pass in Computer,Group or User to help speeding up the search

    .PARAMETER IdentityType
    By default objects are searched using sAMAccountName format, here you can pass different representation that need to match the passed in ADObject

    .PARAMETER Credential
    Use this credential to connect to the domain and search for the needed ADObject. If not passed, uses the current process' one.

    .PARAMETER SearchAllDomains
    Search for the object in all domains connected to the current one. If you are unsure what domain the object is coming from,
    using this switch will search through all domains in your forest and also in the ones that are trusted. This is HEAVY, but it can save
    some headaches.

    .PARAMETER EnableException
            By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
            This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
            Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
    Author: Niphlod, https://github.com/niphlod
    Tags:
    dbatools PowerShell module (https://dbatools.io, [email protected])
   Copyright: (c) 2018 by dbatools, licensed under MIT
    License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
    Get-DbaADObject -ADObject "contoso\ctrlb" -Type User

    Searches in the contoso domain for a ctrlb user

    .EXAMPLE
    Get-DbaADObject -ADObject "[email protected]" -Type User -IdentityType UserPrincipalName

    Searches in the contoso domain for a ctrlb user using the UserPrincipalName format. Again, beware of the UPN suffixes in elaborate AD structures!

    .EXAMPLE
    Get-DbaADObject -ADObject "contoso\[email protected]" -Type User -IdentityType UserPrincipalName

    Searches in the contoso domain for a [email protected] user using the UserPrincipalName format. This kind of search is better than the previous one
    because it takes into account possible UPN suffixes

    .EXAMPLE
    Get-DbaADObject -ADObject "[email protected]" -Type User -IdentityType UserPrincipalName -SearchAllDomains

    As a last resort, searches in all the current forest for a [email protected] user using the UserPrincipalName format

    .EXAMPLE
    Get-DbaADObject -ADObject "contoso\sqlcollaborative" -Type Group

    Searches in the contoso domain for a sqlcollaborative group

    .EXAMPLE
    Get-DbaADObject -ADObject "contoso\SqlInstance2014$" -Type Group

    Searches in the contoso domain for a SqlInstance2014 computer (remember the ending $ for computer objects)

    .EXAMPLE
    Get-DbaADObject -ADObject "contoso\ctrlb" -Type User -EnableException

    Searches in the contoso domain for a ctrlb user, suppressing all error messages and throw exceptions that can be caught instead

    #>
    [CmdletBinding()]
    param (
        [string[]]$ADObject,
        [ValidateSet("User", "Group", "Computer")]
        [string]$Type,

        [ValidateSet("DistinguishedName", "Guid", "Name", "SamAccountName", "Sid", "UserPrincipalName")]
        [string]$IdentityType = "SamAccountName",

        [PSCredential]$Credential,
        [switch]$SearchAllDomains,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {
        try {
            Add-Type -AssemblyName System.DirectoryServices.AccountManagement
        } catch {
            Stop-Function -Message "Failed to load the required module $($_.Exception.Message)" -EnableException $EnableException -InnerErrorRecord $_
            return
        }
        switch ($Type) {
            "User" {
                $searchClass = [System.DirectoryServices.AccountManagement.UserPrincipal]
            }
            "Group" {
                $searchClass = [System.DirectoryServices.AccountManagement.GroupPrincipal]
            }
            "Computer" {
                $searchClass = [System.DirectoryServices.AccountManagement.ComputerPrincipal]
            }
            default {
                $searchClass = [System.DirectoryServices.AccountManagement.Principal]
            }
        }

        function Get-DbaADObjectInternal($Domain, $IdentityType, $obj, $EnableException) {
            try {
                # can we simply resolve the passed domain ? This has the benefit of raising almost instantly if the domain is not valid
                $Context = New-Object System.DirectoryServices.ActiveDirectory.DirectoryContext('Domain', $Domain)
                $null = [System.DirectoryServices.ActiveDirectory.Domain]::GetDomain($Context)
                if ($Credential) {
                    $ctx = New-Object System.DirectoryServices.AccountManagement.PrincipalContext('Domain', $Domain, $Credential.UserName, $Credential.GetNetworkCredential().Password)
                } else {
                    $ctx = New-Object System.DirectoryServices.AccountManagement.PrincipalContext('Domain', $Domain)
                }
                $found = $searchClass::FindByIdentity($ctx, $IdentityType, $obj)
                $found
            } catch {
                Stop-Function -Message "Errors trying to connect to the domain $Domain $($_.Exception.Message)" -EnableException $EnableException -InnerErrorRecord $_ -Target $ADObj
            }
        }
    }
    process {
        if (Test-FunctionInterrupt) { return }
        foreach ($ADObj in $ADObject) {
            # passing the domain as the first part before the \ wins always in defining the domain to search into
            $Splitted = $ADObj.Split("\")
            if ($Splitted.Length -ne 2) {
                # we can also take the object@domain format
                $Splitted = $ADObj.Split("@")
                if ($Splitted.Length -ne 2) {
                    Stop-Function -Message "You need to pass ADObject either DOMAIN\object or object@domain format" -Continue -EnableException $EnableException
                } else {
                    if ($IdentityType -ne 'UserPrincipalName') {
                        $obj, $Domain = $Splitted
                    } else {
                        # if searching for a UserPrincipalName format without a specific domain passed in before the slash,
                        # we can assume there are no custom UPN suffixes in place
                        $obj, $Domain = $AdObj, $Splitted[1]
                    }
                }
            } else {
                $Domain, $obj = $Splitted
            }
            if ($SearchAllDomains) {
                Write-Message -Message "Searching for $obj under all domains in $IdentityType format" -Level VeryVerbose
                # if we're lucky, we can resolve the domain right away
                try {
                    Get-DbaADObjectInternal -Domain $Domain -IdentityType $IdentityType -obj $obj -EnableException $true
                } catch {
                    # if not, let's build up all domains
                    $ForestObject = [System.DirectoryServices.ActiveDirectory.Forest]::GetCurrentForest()
                    $AllDomains = $ForestObject.Domains.Name
                    foreach ($ForestDomain in $AllDomains) {
                        Write-Message -Message "Searching for $obj under domain $ForestDomain in $IdentityType format" -Level VeryVerbose
                        $found = Get-DbaADObjectInternal -Domain $ForestDomain -IdentityType $IdentityType -obj $obj
                        if ($found) {
                            $found
                            break
                        }
                    }
                    # we are very unlucky, let's search also in all trusted domains
                    $AllTrusted = ($ForestObject.GetAllTrustRelationships().TopLevelNames | Where-Object Status -eq 'Enabled').Name
                    foreach ($ForestDomain in $AllTrusted) {
                        Write-Message -Message "Searching for $obj under domain $ForestDomain in $IdentityType format" -Level VeryVerbose
                        $found = Get-DbaADObjectInternal -Domain $ForestDomain -IdentityType $IdentityType -obj $obj
                        if ($found) {
                            $found
                            break
                        }
                    }
                }
            } else {
                Write-Message -Message "Searching for $obj under domain $domain in $IdentityType format" -Level VeryVerbose
                Get-DbaADObjectInternal -Domain $Domain -IdentityType $IdentityType -obj $obj
            }
        }
    }
}

tools\dbatools\internal\functions\Get-InternalService.ps1

function Get-InternalService {
    <#
    .SYNOPSIS
        Uses WMI/CIM to scan for the existance of a specific windows services.

    .DESCRIPTION
        Uses WMI/CIM to scan for the existance of a specific windows services.

        Use Get-InternalService if you are interested in scanning for sql server services exclusively.

    .PARAMETER ComputerName
        The computer to target. Uses localhost by default.

    .PARAMETER Name
        The name of the service to search for.

    .PARAMETER DisplayName
        The display-name of the service to search for.

    .PARAMETER Credential
        The credentials to use when connecting to the computer.

    .PARAMETER DoNotUse
        Connection Protocols that should not be used when retrieving the information.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .EXAMPLE
        Get-InternalService -Name LanmanServer

        Returns information on the LanmanServer service from localhost.

    .EXAMPLE
        Get-ADComputer -Filter * | Get-InternalService -Name Browser

        First retrieves all computer accounts from active directory, then scans all of those computers for the browser service.
        Note: THis may take seriously long time, you may also want to filter out computers that are offline before scanning for services.

    .EXAMPLE
        Get-InternalService -ComputerName "server1","server2","server3" -Name Lanman%

        Scans the servers server1, server2 and server3 for all services whose name starts with 'lanman'
    #>
    [CmdletBinding()]
    param (
        [string[]]
        $Name,

        [string[]]
        $DisplayName,

        [Parameter(ValueFromPipeline)]
        [Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter[]]
        $ComputerName = $env:COMPUTERNAME,

        [System.Management.Automation.PSCredential]
        $Credential,

        [Sqlcollaborative.Dbatools.Connection.ManagementConnectionType[]]
        $DoNotUse,

        [switch]
        [Alias('Silent')]$EnableException
    )

    begin {
        Write-Message -Level InternalComment -Message "Starting"
        Write-Message -Level System -Message "Bound parameters: $($PSBoundParameters.Keys -join ", ")"

        if (-not (Test-Bound "Name") -and -not (Test-Bound "DisplayName")) {
            $Name = "%"
        }
    }
    process {
        :main foreach ($computer in $ComputerName) {
            Write-Message -Level VeryVerbose -Message "Processing queries to $($computer.ComputerName)" -Target $computer.ComputerName
            foreach ($serviceName in $Name) {
                Write-Message -Level Verbose -Message "Searching for services with name: $serviceName" -Target $computer.ComputerName
                try {
                    if (Test-Bound "Credential") { Get-DbaCmObject -Query "SELECT * FROM Win32_Service WHERE Name LIKE '$serviceName'" -ComputerName $computer.ComputerName -Credential $Credential -EnableException -DoNotUse $DoNotUse }
                    else { Get-DbaCmObject -Query "SELECT * FROM Win32_Service WHERE Name LIKE '$serviceName'" -ComputerName $computer.ComputerName -EnableException -DoNotUse $DoNotUse }
                } catch {
                    if ($_.CategoryInfo.Category -eq "OpenError") {
                        Stop-Function -Message "Failed to access computer $($computer.ComputerName)" -ErrorRecord $_ -Target $computer.ComputerName -Continue -ContinueLabel main
                    } else {
                        Stop-Function -Message "Failed to retrieve service" -ErrorRecord $_ -Target $computer.ComputerName -Continue
                    }
                }
            }

            foreach ($serviceDisplayName in $DisplayName) {
                Write-Message -Level Verbose -Message "Searching for services with display name: $serviceDisplayName" -Target $computer.ComputerName
                try {
                    if (Test-Bound "Credential") { Get-DbaCmObject -Query "SELECT * FROM Win32_Service WHERE DisplayName LIKE '$serviceDisplayName'" -ComputerName $computer.ComputerName -Credential $Credential -EnableException -DoNotUse $DoNotUse }
                    else { Get-DbaCmObject -Query "SELECT * FROM Win32_Service WHERE DisplayName LIKE '$serviceDisplayName'" -ComputerName $computer.ComputerName -EnableException -DoNotUse $DoNotUse }
                } catch {
                    if ($_.CategoryInfo.Category -eq "OpenError") {
                        Stop-Function -Message "Failed to access computer $($computer.ComputerName)" -ErrorRecord $_ -Target $computer.ComputerName -Continue -ContinueLabel main
                    } else {
                        Stop-Function -Message "Failed to retrieve service" -ErrorRecord $_ -Target $computer.ComputerName -Continue
                    }
                }
            }
        }
    }
    end {
        Write-Message -Level InternalComment -Message "Ending"
    }
}

tools\dbatools\internal\functions\Get-JobList.ps1

function Get-JobList {
    <#
    .SYNOPSIS
        Helper function to get SQL Agent jobs.
    .DESCRIPTION
        Helper function to get all SQL Agent jobs or provide filter
    .PARAMETER SqlInstance
        SQL Server instance
    .PARAMETER SqlCredential
        Credential to use if SqlInstance did not include it.
    .PARAMETER JobFilter
        Object of jobs to filter on, also supports wildcard patterns
    .PARAMETER StepFilter
        Object of job steps to filter on, also supports wildcard patterns
    .PARAMETER Not
        Reverse results where object returned excludes filtered content.
    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .EXAMPLE
        Get-JobList -SqlInstance sql2016

        Returns the full JobServer.Jobs object found on sql2016
    .EXAMPLE
        Get-JobList -SqlInstance sql2016 -JobFilter '*job*'

        Returns the Job object for each job name found to have "job" in the name on sql2016
    .EXAMPLE
        Get-JobList -SqlInstance sql2016 -JobFilter '*job*' -Not

        Returns any Job object that does not have "job" in the name on sql2016
    .EXAMPLE
        Get-JobList -SqlInstance YourServer -JobFilter 'JobName'

        Returns the Job object where the job name is 'JobName' on sql2016
    .EXAMPLE
        Get-JobList -SqlInstance YourServer -JobFilter 'JobName' -Not

        Returns any Job object where the job name is not 'JobName' on sql2016
    .EXAMPLE
        Get-JobList -SqlInstance YourServer -JobFilter job_3_upload, job_3_download

        Returns the Job object for where job is job_3_upload or job_3_download on sql2016
    .EXAMPLE
        Get-JobList -SqlInstance YourServer -JobFilter job_3_upload, job_3_download -Not

        Returns any Job object where job is not job_3_upload or job_3_download on sql2016
    .NOTES
        Author: Shawn Melton (@wsmelton)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT
       #>
    [cmdletbinding()]
    param(
        [Parameter(ValueFromPipeline)]
        [DbaInstanceParameter]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$JobFilter,
        [string[]]$StepFilter,
        [switch]$Not,
        [Alias('Silent')]
        [switch]$EnableException
    )
    process {
        $server = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential

        $jobs = $server.JobServer.Jobs
        if ( (Test-Bound 'JobFilter') -or (Test-Bound 'StepFilter') ) {
            if ($JobFilter.Count -gt 1) {
                if ($Not) {
                    $jobs | Where-Object Name -NotIn $JobFilter
                } else {
                    $jobs | Where-Object Name -In $JobFilter
                }
            } else {
                foreach ($job in $jobs) {
                    if ($JobFilter -match '`*') {
                        if ($Not) {
                            $job | Where-Object Name -NotLike $JobFilter
                        } else {
                            $job | Where-Object Name -Like $JobFilter
                        }
                    } else {
                        if ($Not) {
                            $job | Where-Object Name -NE $JobFilter
                        } else {
                            $job | Where-Object Name -EQ $JobFilter
                        }
                    }
                    if ($StepFilter -match '`*') {
                        if ($Not) {
                            $stepFound = $job.JobSteps | Where-Object Name -NotLike $StepFilter
                            if ($stepFound.Count -gt 0) {
                                $job
                            }
                        } else {
                            $stepFound = $job.JobSteps | Where-Object Name -Like $StepFilter
                            if ($stepFound.Count -gt 0) {
                                $job
                            }
                        }
                    } elseif ($StepName.Count -gt 1) {
                        if ($Not) {
                            $stepFound = $job.JobSteps | Where-Object Name -NotIn $StepName
                            if ($stepFound.Count -gt 0) {
                                $job
                            }
                        } else {
                            $stepFound = $job.JobSteps | Where-Object Name -In $StepName
                            if ($stepFound.Count -gt 0) {
                                $job
                            }
                        }
                    } else {
                        if ($Not) {
                            $stepFound = $job.JobSteps | Where-Object Name -NE $StepName
                            if ($stepFound.Count -gt 0) {
                                $job
                            }
                        } else {
                            $stepFound = $job.JobSteps | Where-Object Name -EQ $StepName
                            if ($stepFound.Count -gt 0) {
                                $job
                            }
                        }
                    }
                }
            }
        } else {
            $jobs
        }
    }
}

tools\dbatools\internal\functions\Get-Language.ps1

function Get-Language {
    <#
        .SYNOPSIS
            Converts Microsoft's language ID to human readable format

        .DESCRIPTION
            Converts Microsoft's language ID to human readable format

        .PARAMETER Id
            The language ID

        .EXAMPLE
            Get-Language 1033

            Returns a pscustomobject with id, alias and name
       #>
    [CmdletBinding()]
    param (
        [int]$id
    )
    process {

        $culture = [System.Globalization.CultureInfo]::GetCultureInfo($id)

        $excludeProps = 'Parent', 'IetfLanguageTag', 'CompareInfo', 'TextInfo', 'IsNeutralCulture', 'NumberFormat', 'DateTimeFormat', 'Calendar'
        , 'OptionalCalendars', 'UseUserOverride', 'IsReadOnly'
        Select-DefaultView -InputObject $culture -ExcludeProperty $excludeProps
    }
}

tools\dbatools\internal\functions\Get-DbaDbPhysicalFile.ps1

function Get-DbaDbPhysicalFile {
    <#
    .SYNOPSIS
    Gets raw information about physical files linked to databases

    .DESCRIPTION
    Fastest way to fetch just the paths of the physical files for every database on the instance, also for offline databases.
    Incidentally, it also fetches the paths for MMO and FS filegroups.
    This is partly already in Get-DbaDbFile, but this internal needs to stay lean and fast, as it's heavily used in top-level functions

    .PARAMETER SqlInstance
    SMO object representing the SQL Server to connect to.

    .EXAMPLE
    Get-DbaDbPhysicalFile -SqlInstance server1\instance2

    .NOTES
        Author: Simone Bizzotto

        dbatools PowerShell module (https://dbatools.io, [email protected])
       Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT
       #>
    [CmdletBinding()]
    param(
        [parameter(Mandatory)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]
        $SqlCredential
    )
    try {
        $Server = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential
    } catch {
        Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $SqlInstance
        return
    }
    if ($Server.versionMajor -le 8) {
        $sql = "SELECT DB_NAME(dbid) AS Name, filename AS PhysicalName FROM sysaltfiles"
    } else {
        $sql = "SELECT DB_NAME(database_id) AS Name, physical_name AS PhysicalName FROM sys.master_files"
    }
    Write-Message -Level Debug -Message "$sql"
    try {
        $Server.Query($sql)
    } catch {
        throw "Error enumerating files"
    }
}

tools\dbatools\internal\functions\Connect-SqlInstance.ps1

function Connect-SqlInstance {
    <#
    .SYNOPSIS
        Internal function to establish smo connections.

    .DESCRIPTION
        Internal function to establish smo connections.

        Can interpret any of the following types of information:
        - String
        - Smo Server objects
        - Smo Linked Server objects

        Related Docs, Pull Requests and Issues:

    Connect commands and alt Windows Credential fix
    https://github.com/sqlcollaborative/dbatools/pull/3835

    Connect-*Instance, fix errors with Windows logins
    https://github.com/sqlcollaborative/dbatools/pull/4426

    Invoke-DbaSqlQuery fails to use proper Windows credentials
    https://github.com/sqlcollaborative/dbatools/issues/3780

    Fixed auth issue
    https://github.com/sqlcollaborative/dbatools/pull/3809

    Connecting to an Instance of SQL Server
    https://docs.microsoft.com/en-us/sql/relational-databases/server-management-objects-smo/create-program/connecting-to-an-instance-of-sql-server

    SQL Server Connection Pooling (ADO.NET)
    https://docs.microsoft.com/en-us/dotnet/framework/data/adonet/sql-server-connection-pooling

    .PARAMETER SqlInstance
        The SQL Server instance to restore to.

    .PARAMETER SqlCredential
        Allows you to login to servers using SQL Logins as opposed to Windows Auth/Integrated/Trusted.

    .PARAMETER ParameterConnection
        This call is for dynamic parameters only and is no longer used, actually.

    .PARAMETER AzureUnsupported
        Throw if Azure is detected but not supported

    .PARAMETER RegularUser
        The connection doesn't require SA privileges.
        By default, the assumption is that SA is no longer required.

    .PARAMETER MinimumVersion
       The minimum version that the calling command will support

    .PARAMETER StatementTimeout
        Sets the number of seconds a statement is given to run before failing with a timeout error.

    .EXAMPLE
        Connect-SqlInstance -SqlInstance sql2014

        Connect to the Server sql2014 with native credentials.
    #>
    [CmdletBinding()]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSAvoidDefaultValueSwitchParameter", "")]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSAvoidUsingEmptyCatchBlock", "")]
    param (
        [Parameter(Mandatory)]
        [object]$SqlInstance,
        [object]$SqlCredential,
        [switch]$ParameterConnection,
        [switch]$RegularUser = $true,
        [int]$StatementTimeout,
        [int]$MinimumVersion,
        [switch]$AzureUnsupported,
        [switch]$NonPooled
    )

    #region Utility functions
    function Invoke-TEPPCacheUpdate {
        [CmdletBinding()]
        param (
            [System.Management.Automation.ScriptBlock]$ScriptBlock
        )

        try {
            [ScriptBlock]::Create($scriptBlock).Invoke()
        } catch {
            # If the SQL Server version doesn't support the feature, we ignore it and silently continue
            if ($_.Exception.InnerException.InnerException.GetType().FullName -eq "Microsoft.SqlServer.Management.Sdk.Sfc.InvalidVersionEnumeratorException") {
                return
            }

            if ($ENV:APPVEYOR_BUILD_FOLDER -or ([Sqlcollaborative.Dbatools.Message.MEssageHost]::DeveloperMode)) { throw }
            else {
                Write-Message -Level Warning -Message "Failed TEPP Caching: $($scriptBlock.ToString() | Select-String '"(.*?)"' | ForEach-Object { $_.Matches[0].Groups[1].Value })" -ErrorRecord $_ 3>$null
            }
        }
    }
    #endregion Utility functions

    #region Ensure Credential integrity
    <#
    Usually, the parameter type should have been not object but off the PSCredential type.
    When binding null to a PSCredential type parameter on PS3-4, it'd then show a prompt, asking for username and password.

    In order to avoid that and having to refactor lots of functions (and to avoid making regular scripts harder to read), we created this workaround.
    #>
    if ($SqlCredential) {
        if ($SqlCredential.GetType() -ne [System.Management.Automation.PSCredential]) {
            throw "The credential parameter was of a non-supported type. Only specify PSCredentials such as generated from Get-Credential. Input was of type $($SqlCredential.GetType().FullName)"
        }
    }
    #endregion Ensure Credential integrity

    #region Safely convert input into instance parameters
    <#
    This is a bit ugly, but:
    In some cases functions would directly pass their own input through when the parameter on the calling function was typed as [object[]].
    This would break the base parameter class, as it'd automatically be an array and the parameterclass is not designed to handle arrays (Shouldn't have to).

    Note: Multiple servers in one call were never supported, those old functions were liable to break anyway and should be fixed soonest.
    #>
    if ($SqlInstance.GetType() -eq [Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter]) {
        [DbaInstanceParameter]$ConvertedSqlInstance = $SqlInstance
        if ($ConvertedSqlInstance.Type -like "SqlConnection") {
            [DbaInstanceParameter]$ConvertedSqlInstance = New-Object Microsoft.SqlServer.Management.Smo.Server($ConvertedSqlInstance.InputObject)
        }
    } else {
        [DbaInstanceParameter]$ConvertedSqlInstance = [DbaInstanceParameter]($SqlInstance | Select-Object -First 1)

        if ($SqlInstance.Count -gt 1) {
            Write-Message -Level Warning -EnableException $true -Message "More than on server was specified when calling Connect-SqlInstance from $((Get-PSCallStack)[1].Command)"
        }
    }
    #endregion Safely convert input into instance parameters

    #region Input Object was a server object
    if ($ConvertedSqlInstance.InputObject.GetType() -eq [Microsoft.SqlServer.Management.Smo.Server]) {
        $server = $ConvertedSqlInstance.InputObject
        $authtypeSMO = $SqlCredential.UserName -like '*\*'
        if ($server.ConnectionContext.IsOpen -eq $false) {
            if ($NonPooled) {
                # When the Connect method is called, the connection is not automatically released.
                # The Disconnect method must be called explicitly to release the connection to the connection pool.
                # https://docs.microsoft.com/en-us/sql/relational-databases/server-management-objects-smo/create-program/disconnecting-from-an-instance-of-sql-server
                $server.ConnectionContext.Connect()
            } elseif ($authtypeSMO -eq "Windows Authentication with Credential") {
                # Make it connect in a natural way, hard to explain.
                # See https://docs.microsoft.com/en-us/sql/relational-databases/server-management-objects-smo/create-program/connecting-to-an-instance-of-sql-server
                $null = $server.Information.Version

                # Sometimes, however, the above may not connect as promised. Force it.
                # See https://github.com/sqlcollaborative/dbatools/pull/4426
                if ($server.ConnectionContext.IsOpen -eq $false) {
                    $server.ConnectionContext.Connect()
                }
            } else {
                # SqlConnectionObject.Open() enables connection pooling does not support
                # alternative Windows Credentials and passes default credentials
                # See https://github.com/sqlcollaborative/dbatools/pull/3809
                $server.ConnectionContext.SqlConnectionObject.Open()
            }
        }

        # Register the connected instance, so that the TEPP updater knows it's been connected to and starts building the cache
        [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::SetInstance($ConvertedSqlInstance.FullSmoName.ToLower(), $server.ConnectionContext.Copy(), ($server.ConnectionContext.FixedServerRoles -match "SysAdmin"))

        # Update cache for instance names
        if ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["sqlinstance"] -notcontains $ConvertedSqlInstance.FullSmoName.ToLower()) {
            [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["sqlinstance"] += $ConvertedSqlInstance.FullSmoName.ToLower()
        }

        # Update lots of registered stuff
        if (-not [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::TeppSyncDisabled) {
            $FullSmoName = $ConvertedSqlInstance.FullSmoName.ToLower()
            foreach ($scriptBlock in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::TeppGatherScriptsFast)) {
                Invoke-TEPPCacheUpdate -ScriptBlock $scriptBlock
            }
        }

        # Make ComputerName easily available in the server object
        if (-not $server.ComputerName) {
            if (-not $server.NetName -or $SqlInstance -match '\.') {
                $parsedcomputername = $ConvertedSqlInstance.ComputerName
            } else {
                $parsedcomputername = $server.NetName
            }
            Add-Member -InputObject $server -NotePropertyName ComputerName -NotePropertyValue $parsedcomputername -Force
        }
        return $server
    }
    #endregion Input Object was a server object

    #region Input Object was anything else

    $server = New-Object Microsoft.SqlServer.Management.Smo.Server $ConvertedSqlInstance.FullSmoName
    $server.ConnectionContext.ApplicationName = "dbatools PowerShell module - dbatools.io"
    if ($ConvertedSqlInstance.IsConnectionString) { $server.ConnectionContext.ConnectionString = $ConvertedSqlInstance.InputObject }

    try {
        if (Test-Bound -ParameterName 'StatementTimeout') {
            $server.ConnectionContext.StatementTimeout = $StatementTimeout
        }
        $server.ConnectionContext.ConnectTimeout = [Sqlcollaborative.Dbatools.Connection.ConnectionHost]::SqlConnectionTimeout

        if ($null -ne $SqlCredential.UserName) {
            $username = ($SqlCredential.UserName).TrimStart("\")

            # support both ad\username and username@ad
            if ($username -like "*\*" -or $username -like "*@*") {
                if ($username -like "*\*") {
                    $domain, $login = $username.Split("\")
                    $authtype = "Windows Authentication with Credential"
                    if ($domain) {
                        $formatteduser = "$login@$domain"
                    } else {
                        $formatteduser = $username.Split("\")[1]
                    }
                } else {
                    $formatteduser = $SqlCredential.UserName
                }

                $server.ConnectionContext.LoginSecure = $true
                $server.ConnectionContext.ConnectAsUser = $true
                $server.ConnectionContext.ConnectAsUserName = $formatteduser
                $server.ConnectionContext.ConnectAsUserPassword = ($SqlCredential).GetNetworkCredential().Password
            } else {
                $authtype = "SQL Authentication"
                $server.ConnectionContext.LoginSecure = $false
                $server.ConnectionContext.set_Login($username)
                $server.ConnectionContext.set_SecurePassword($SqlCredential.Password)
            }
        }
    } catch { }

    try {
        if ($NonPooled) {
            # When the Connect method is called, the connection is not automatically released.
            # The Disconnect method must be called explicitly to release the connection to the connection pool.
            # https://docs.microsoft.com/en-us/sql/relational-databases/server-management-objects-smo/create-program/disconnecting-from-an-instance-of-sql-server
            $server.ConnectionContext.Connect()
        } elseif ($authtype -eq "Windows Authentication with Credential") {
            # Make it connect in a natural way, hard to explain.
            # See https://docs.microsoft.com/en-us/sql/relational-databases/server-management-objects-smo/create-program/connecting-to-an-instance-of-sql-server
            $null = $server.Information.Version

            # Sometimes, however, the above may not connect as promised. Force it.
            # See https://github.com/sqlcollaborative/dbatools/pull/4426
            if ($server.ConnectionContext.IsOpen -eq $false) {
                $server.ConnectionContext.Connect()
            }
        } else {
            # SqlConnectionObject.Open() enables connection pooling does not support
            # alternative Windows Credentials and passes default credentials
            # See https://github.com/sqlcollaborative/dbatools/pull/3809
            $server.ConnectionContext.SqlConnectionObject.Open()
        }
    } catch {
        $message = $_.Exception.InnerException.InnerException
        if ($message) {
            # This is messy but it works to provide users with straightforward & detailed errors
            $message = $message.ToString()
            $message = ($message -Split '-->')[0]
            $message = ($message -Split 'at System.Data.SqlClient')[0]
            $message = ($message -Split 'at System.Data.ProviderBase')[0]

            if ($message -match "network path was not found") {
                $message = "Can't connect to $sqlinstance`: System.Data.SqlClient.SqlException (0x80131904): A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections."
            }

            throw "Can't connect to $ConvertedSqlInstance`: $message "
        } else {
            throw $_
        }
    }

    if ($MinimumVersion -and $server.VersionMajor) {
        if ($server.versionMajor -lt $MinimumVersion) {
            throw "SQL Server version $MinimumVersion required - $server not supported."
        }
    }

    if ($AzureUnsupported -and $server.DatabaseEngineType -eq "SqlAzureDatabase") {
        throw "Azure SQL Database not supported"
    }

    if (-not $RegularUser) {
        if ($server.ConnectionContext.FixedServerRoles -notmatch "SysAdmin") {
            throw "Not a sysadmin on $ConvertedSqlInstance. Quitting."
        }
    }
    #'PrimaryFilePath' seems the culprit for slow SMO on databases
    $Fields2000_Db = 'Collation', 'CompatibilityLevel', 'CreateDate', 'ID', 'IsAccessible', 'IsFullTextEnabled', 'IsSystemObject', 'IsUpdateable', 'LastBackupDate', 'LastDifferentialBackupDate', 'LastLogBackupDate', 'Name', 'Owner', 'ReadOnly', 'RecoveryModel', 'ReplicationOptions', 'Status', 'Version'
    $Fields200x_Db = $Fields2000_Db + @('BrokerEnabled', 'DatabaseSnapshotBaseName', 'IsMirroringEnabled', 'Trustworthy')
    $Fields201x_Db = $Fields200x_Db + @('ActiveConnections', 'AvailabilityDatabaseSynchronizationState', 'AvailabilityGroupName', 'ContainmentType', 'EncryptionEnabled')

    $Fields2000_Login = 'CreateDate', 'DateLastModified', 'DefaultDatabase', 'DenyWindowsLogin', 'IsSystemObject', 'Language', 'LanguageAlias', 'LoginType', 'Name', 'Sid', 'WindowsLoginAccessType'
    $Fields200x_Login = $Fields2000_Login + @('AsymmetricKey', 'Certificate', 'Credential', 'ID', 'IsDisabled', 'IsLocked', 'IsPasswordExpired', 'MustChangePassword', 'PasswordExpirationEnabled', 'PasswordPolicyEnforced')
    $Fields201x_Login = $Fields200x_Login + @('PasswordHashAlgorithm')

    try {
        if ($Server.ServerType -ne 'SqlAzureDatabase') {
            $server.SetDefaultInitFields([Microsoft.SqlServer.Management.Smo.Trigger], 'IsSystemObject')
            $server.SetDefaultInitFields([Microsoft.SqlServer.Management.Smo.Schema], 'IsSystemObject')
            $server.SetDefaultInitFields([Microsoft.SqlServer.Management.Smo.SqlAssembly], 'IsSystemObject')
            $server.SetDefaultInitFields([Microsoft.SqlServer.Management.Smo.Table], 'IsSystemObject')
            $server.SetDefaultInitFields([Microsoft.SqlServer.Management.Smo.View], 'IsSystemObject')
            $server.SetDefaultInitFields([Microsoft.SqlServer.Management.Smo.StoredProcedure], 'IsSystemObject')
            $server.SetDefaultInitFields([Microsoft.SqlServer.Management.Smo.UserDefinedFunction], 'IsSystemObject')

            if ($server.VersionMajor -eq 8) {
                # 2000
                $initFieldsDb = New-Object System.Collections.Specialized.StringCollection
                [void]$initFieldsDb.AddRange($Fields2000_Db)
                $initFieldsLogin = New-Object System.Collections.Specialized.StringCollection
                [void]$initFieldsLogin.AddRange($Fields2000_Login)
                $server.SetDefaultInitFields([Microsoft.SqlServer.Management.Smo.Database], $initFieldsDb)
                $server.SetDefaultInitFields([Microsoft.SqlServer.Management.Smo.Login], $initFieldsLogin)
            } elseif ($server.VersionMajor -eq 9 -or $server.VersionMajor -eq 10) {
                # 2005 and 2008
                $initFieldsDb = New-Object System.Collections.Specialized.StringCollection
                [void]$initFieldsDb.AddRange($Fields200x_Db)
                $initFieldsLogin = New-Object System.Collections.Specialized.StringCollection
                [void]$initFieldsLogin.AddRange($Fields200x_Login)
                $server.SetDefaultInitFields([Microsoft.SqlServer.Management.Smo.Database], $initFieldsDb)
                $server.SetDefaultInitFields([Microsoft.SqlServer.Management.Smo.Login], $initFieldsLogin)
            } else {
                # 2012 and above
                $initFieldsDb = New-Object System.Collections.Specialized.StringCollection
                [void]$initFieldsDb.AddRange($Fields201x_Db)
                $initFieldsLogin = New-Object System.Collections.Specialized.StringCollection
                [void]$initFieldsLogin.AddRange($Fields201x_Login)
                $server.SetDefaultInitFields([Microsoft.SqlServer.Management.Smo.Database], $initFieldsDb)
                $server.SetDefaultInitFields([Microsoft.SqlServer.Management.Smo.Login], $initFieldsLogin)
            }
        }
    } catch {
        # perhaps a DLL issue, continue going
    }

    # Register the connected instance, so that the TEPP updater knows it's been connected to and starts building the cache
    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::SetInstance($ConvertedSqlInstance.FullSmoName.ToLower(), $server.ConnectionContext.Copy(), ($server.ConnectionContext.FixedServerRoles -match "SysAdmin"))

    # Update cache for instance names
    if ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["sqlinstance"] -notcontains $ConvertedSqlInstance.FullSmoName.ToLower()) {
        [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Cache["sqlinstance"] += $ConvertedSqlInstance.FullSmoName.ToLower()
    }

    # Update lots of registered stuff
    if (-not [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::TeppSyncDisabled) {
        $FullSmoName = $ConvertedSqlInstance.FullSmoName.ToLower()
        foreach ($scriptBlock in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::TeppGatherScriptsFast)) {
            Invoke-TEPPCacheUpdate -ScriptBlock $scriptBlock
        }
    }

    if (-not $server.ComputerName) {
        if (-not $server.NetName -or $SqlInstance -match '\.') {
            $parsedcomputername = $ConvertedSqlInstance.ComputerName
        } else {
            $parsedcomputername = $server.NetName
        }
        Add-Member -InputObject $server -NotePropertyName ComputerName -NotePropertyValue $parsedcomputername -Force
    }
    return $server
    #endregion Input Object was anything else
}

tools\dbatools\internal\functions\Get-RegServerGroupReverseParse.ps1

function Get-RegServerGroupReverseParse ($object) {
    if ($object.Name -eq 'DatabaseEngineServerGroup') {
        $object.Name
    } else {
        $name = @()
        do {
            $name += $object.Name.Split("\")[0]
            $object = $object.Parent
        }
        until ($object.Name -eq 'DatabaseEngineServerGroup')

        [array]::Reverse($name)
        $name -join '\'
    }
}

tools\dbatools\internal\functions\Get-RegServerParent.ps1

function Get-RegServerParent {
    [cmdletbinding()]
    param (
        [object]$InputObject
    )
    process {
        $parentcount = 0
        do {
            if ($null -ne $InputObject.Parent) {
                $InputObject = $InputObject.Parent
            }
        }
        until ($null -ne $InputObject.ServerConnection -or $parentcount++ -gt 10)


        if ($parentcount -lt 10) {
            $InputObject
        }
    }
}

tools\dbatools\internal\functions\Convert-ByteToHexString.ps1

function Convert-ByteToHexString {
    <#
    .SYNOPSIS
    Converts byte object into hex string

    .DESCRIPTION
    Converts byte object ([byte[]]@(1,100,23,54)) into the hex string (e.g. '0x01641736')
    Used when working with SMO logins and their byte parameters: sids and hashed passwords

    .PARAMETER InputObject
    Input byte[] object (e.g. [byte[]]@(18,52))

    .NOTES
    Tags: Login, Internal
    Author: Kirill Kravtsov (@nvarscar)
    dbatools PowerShell module (https://dbatools.io, [email protected])
   Copyright: (c) 2018 by dbatools, licensed under MIT
    License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
    Convert-ByteToHexString ([byte[]]@(1,100,23,54))

    Returns hex string '0x01641736'

    .EXAMPLE
    Convert-ByteToHexString 18,52

    Returns hex string '0x1234'
    #>
    param ([byte[]]$InputObject)
    $outString = "0x"
    $InputObject | ForEach-Object { $outString += ("{0:X}" -f $_).PadLeft(2, "0") }
    $outString
}

tools\dbatools\internal\functions\Convert-DbaLsn.ps1

function Convert-DbaLSN {
    <#
    .SYNOPSIS
        Converts Lsns betweent Hex and/or numeric formats

    .DESCRIPTION
        Function takes an LSN in either split Hexadecimal format () or numberic

        It then returns both formats in an object

    .PARAMETER LSN
        The LSN value to be converted

    .EXAMPLE
        PS C:\ $output = Convert-DbaLSN -LSN 0000002f:000044aa:002b

        Will return object $Output with the following value
        $Output.HexLSN = 0000002f:000044aa:002b
        $Output.NumbericLSN =
          #>
    [CmdletBinding()]
    param(
        [string]$LSN,
        [Alias('Silent')]
        [switch]$EnableException
    )

    if ($LSN -match '^[a-fA-F0-9]{8}:[a-fA-F0-9]{8}:[a-fA-F0-9]{4}$') {
        Write-Message -Message 'Hexadecimal LSN passed in, converting to numeric' -Level Verbose
        $sections = $LSN.Split(':')
        $sect1 = [System.Convert]::ToInt64($sections[0], 16).ToString()
        $sect2 = [System.Convert]::ToInt64($sections[1], 16).ToString().PadLeft(10, '0')
        $sect3 = [System.Convert]::ToInt64($sections[2], 16).ToString().PadLeft(5, '0')
        $Hexadecimal = $LSN
        $Numeric = $sect1 + $sect2 + $sect3

    } elseif ($LSN -match '^[0-9]{15}[0-9]+$') {
        Write-Message -Message 'Numeric LSN passed in, converting to Hexadecimal' -Level Verbose
        $sect1 = '{0:x}' -f [System.Convert]::ToString($LSN.Substring(0, $LSN.length - 15), 16).PadLeft(8, '0')
        $sect2 = '{0:x}' -f [System.Convert]::ToString($LSN.Substring($lsn.length - 14, 9), 16).PadLeft(8, '0')
        $sect3 = '{0:x}' -f [System.Convert]::ToString($LSN.Substring($lsn.length - 5, 5), 16).PadLeft(4, '0')
        $Numeric = $LSN
        $Hexadecimal = $sect1 + ':' + $sect2 + ':' + $sect3
    } else {
        Stop-Function -Message 'LSN passed in is neither Numeric nor in the correct hexadecimal format'
        return
    }

    [PSCustomObject]@{
        Hexadecimal = $Hexadecimal
        Numeric     = $Numeric
    }
}

tools\dbatools\internal\functions\Convert-DbaTimelineStatusColor.ps1

function Convert-DbaTimelineStatusColor {
    <#
        .SYNOPSIS
            Converts literal string status to a html color

        .DESCRIPTION
            This function acceptes Agnet Job status as literal string input and covnerts to html color.
            This is internal function, part of ConvertTo-DbaTimeline

        .PARAMETER Status

            The Status input parameter must be a valid SQL Agent Job status as literal string as defined in MS Books:
                Status of the job execution:
                    Failed
                    Succeeded
                    Retry
                    Canceled
                    In Progress

        .NOTES
            Tags: Internal
            Author: Marcin Gminski (@marcingminski)

            Dependency: None
            Requirements: None

            Website: https://dbatools.io
            Copyright: (c) 2018 by dbatools, licensed under MIT
-           License: MIT https://opensource.org/licenses/MIT

        .LINK
            --internal function, not exposed to end user

        .EXAMPLE
            Convert-DbaTimelineStatusColor ("Succeeded")

            Returned string: #36B300
    #>

    [CmdletBinding()]
    param (
        [Parameter(Mandatory)]
        [string]
        $Status
    )
    $out = switch ($Status) {
        "Failed" {"#FF3D3D"}
        "Succeeded" {"#36B300"}
        "Retry" {"#FFFF00"}
        "Canceled" {"#C2C2C2"}
        "In Progress" {"#00CCFF"}
        default {"#FF00CC"}
    }
    return $out
}

tools\dbatools\internal\functions\Convert-DbVersionToSqlVersion.ps1

function Convert-DbVersionToSqlVersion {
    <#
.SYNOPSIS
Internal function that makes db versions human readable

.DESCRIPTION
Internal function that makes db versions human readable

.PARAMETER dbversion
Analysis Server

.EXAMPLE
Convert-DbVersionToSqlVersion -dbversion 856

Returns "SQL Server vNext CTP1"

    #>
    param (
        [string]$dbversion
    )

    $dbversion = switch ($dbversion) {
        869 { "SQL Server 2017"}
        856 { "SQL Server vNext CTP1" }
        852 { "SQL Server 2016" }
        829 { "SQL Server 2016 Prerelease" }
        782 { "SQL Server 2014" }
        706 { "SQL Server 2012" }
        684 { "SQL Server 2012 CTP1" }
        661 { "SQL Server 2008 R2" }
        660 { "SQL Server 2008 R2" }
        655 { "SQL Server 2008 SP2+" }
        612 { "SQL Server 2005" }
        611 { "SQL Server 2005" }
        539 { "SQL Server 2000" }
        515 { "SQL Server 7.0" }
        408 { "SQL Server 6.5" }
        default { $dbversion }
    }

    return $dbversion
}

tools\dbatools\internal\functions\Convert-HexStringToByte.ps1

function Convert-HexStringToByte {
    <#
    .SYNOPSIS
    Converts hex string into byte object

    .DESCRIPTION
    Converts hex string (e.g. '0x01641736') into the byte object ([byte[]]@(1,100,23,54))
    Used when working with SMO logins and their byte parameters: sids and hashed passwords

    .PARAMETER InputObject
    Input hex string (e.g. '0x1234' or 'DBA2FF')

    .NOTES
    Tags: Login, Internal
    Author: Kirill Kravtsov (@nvarscar)
    dbatools PowerShell module (https://dbatools.io, [email protected])
   Copyright: (c) 2018 by dbatools, licensed under MIT
    License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
    Convert-HexStringToByte '0x01641736'

    Returns byte[] object [byte[]]@(1,100,23,54)

    .EXAMPLE
    Convert-HexStringToByte '1234'

    Returns byte[] object [byte[]]@(18,52)
    #>
    param (
        [string]$InputObject
    )
    $hexString = $InputObject.TrimStart("0x")
    if ($hexString.Length % 2 -eq 1) { $hexString = '0' + $hexString }
    [byte[]]$outByte = $null; $outByte += 0 .. (($hexString.Length) / 2 - 1) | ForEach-Object { [Int16]::Parse($hexString.Substring($_ * 2, 2), 'HexNumber') }
    Return $outByte
}

tools\dbatools\internal\functions\ConvertTo-JsDate.ps1

function ConvertTo-JsDate {
    <#
        .SYNOPSIS
            Converts Datetime input to a Java Script date format

        .DESCRIPTION
            This function acceptes date time input and converts to a Java script compatible format.
            Java Script date time format:
                New date (yyyy, MM, dd, HH, mm, ss)

            This is internal function part of ConvertTo-DbaTimeline

        .PARAMETER InputDate

            The InputDate parameter must be a valid datetime type

        .NOTES
            Tags: Internal
            Author: Marcin Gminski (@marcingminski)

            Dependency: None
            Requirements: None

            Website: https://dbatools.io
            Copyright: (c) 2018 by dbatools, licensed under MIT
-           License: MIT https://opensource.org/licenses/MIT

        .LINK
            --internal function, not exposed to end user

        .EXAMPLE
            ConvertTo-JsDate (Get-Date)

            Returned output: new Date(2018, 7, 14, 07, 40, 42)
       #>

    [CmdletBinding()]
    param (
        [Parameter(Mandatory)]
        [datetime]
        $InputDate
    )
    [string]$out = "new Date($(Get-Date $InputDate -format "yyyy"), $($(Get-Date $InputDate -format "MM")-1), $(Get-Date $InputDate -format "dd"), $(Get-Date $InputDate -format "HH"), $(Get-Date $InputDate -format "mm"), $(Get-Date $InputDate -format "ss"))"
    return $out
}

tools\dbatools\internal\functions\Disconnect-Regserver.ps1

function Disconnect-Regserver ($Server) {
    $i = 0
    do { $server = $server.Parent }
    until ($null -ne $server.ServerConnection -or $i++ -gt 20)
    if ($server.ServerConnection) {
        $server.ServerConnection.Disconnect()
    }
}

tools\dbatools\internal\functions\Find-SqlServerUpdate.ps1

function Find-SqlServerUpdate {
    <#
        .SYNOPSIS
            Returns a SQL Server KB filesystem object based on parameters
        .DESCRIPTION
            Recursively searches specified folder for a file that matches the following pattern:
            "SQLServer$MajorVersion*-KB$KB-*$Architecture*.exe"

        .EXAMPLE
            PS> Find-SqlServerUpdate -MajorVersion 2016 -KB 412348 -Path \\my\updates

            Looks for SQLServer2016*-KB412348-*x64*.exe in \\my\updates and all the subfolders
    #>
    [OutputType('System.IO.FileInfo')]
    [CmdletBinding()]
    Param
    (
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [string]$MajorVersion,
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [string]$KB,
        [ValidateSet('x86', 'x64')]
        [string]$Architecture = 'x64',
        [string[]]$Path = (Get-DbatoolsConfigValue -Name 'Path.SQLServerUpdates'),
        [bool]$EnableException = $EnableException

    )
    begin {
    }
    process {
        if (!$Path) {
            Stop-Function -Message "Path to SQL Server updates folder is not set. Consider running Set-DbatoolsConfig -Name Path.SQLServerUpdates -Value '\\path\to\updates' or specify the path in the original command"
            return
        }
        $filter = "SQLServer$MajorVersion*-KB$KB-*$Architecture*.exe"
        Write-Message -Level Verbose -Message "Using filter [$filter] to check for updates in $Path"
        try {
            foreach ($folder in (Get-Item -Path $Path -ErrorAction Stop)) {
                $file = Get-ChildItem -Path $folder -Filter $filter -File -Recurse -ErrorAction Stop
                if ($file) {
                    return $file | Select-Object -First 1
                }
            }
        } catch {
            Stop-Function -Message "Failed to enumerate files in $Path" -ErrorRecord $_
            return
        }
    }
}

tools\dbatools\internal\functions\flowcontrol\Invoke-Parallel.ps1

function Invoke-Parallel {
    <#
    .SYNOPSIS
        Function to control parallel processing using runspaces

    .DESCRIPTION
        Function to control parallel processing using runspaces

            Note that each runspace will not have access to variables and commands loaded in your session or in other runspaces by default.
            This behaviour can be changed with parameters.

    .PARAMETER ScriptFile
        File to run against all input objects.  Must include parameter to take in the input object, or use $args.  Optionally, include parameter to take in parameter.  Example: C:\script.ps1

    .PARAMETER ScriptBlock
        Scriptblock to run against all computers.

        You may use $Using:<Variable> language in PowerShell 3 and later.

            The parameter block is added for you, allowing behaviour similar to foreach-object:
                Refer to the input object as $_.
                Refer to the parameter parameter as $parameter

    .PARAMETER InputObject
        Run script against these specified objects.

    .PARAMETER Parameter
        This object is passed to every script block.  You can use it to pass information to the script block; for example, the path to a logging folder

            Reference this object as $parameter if using the scriptblock parameterset.

    .PARAMETER ImportVariables
        If specified, get user session variables and add them to the initial session state

    .PARAMETER ImportModules
        If specified, get loaded modules and pssnapins, add them to the initial session state

    .PARAMETER Throttle
        Maximum number of threads to run at a single time.

    .PARAMETER SleepTimer
        Milliseconds to sleep after checking for completed runspaces and in a few other spots.  I would not recommend dropping below 200 or increasing above 500

    .PARAMETER RunspaceTimeout
        Maximum time in seconds a single thread can run.  If execution of your code takes longer than this, it is disposed.  Default: 0 (seconds)

        WARNING:  Using this parameter requires that maxQueue be set to throttle (it will be by default) for accurate timing.  Details here:
        http://gallery.technet.microsoft.com/Run-Parallel-Parallel-377fd430

    .PARAMETER NoCloseOnTimeout
        Do not dispose of timed out tasks or attempt to close the runspace if threads have timed out. This will prevent the script from hanging in certain situations where threads become non-responsive, at the expense of leaking memory within the PowerShell host.

    .PARAMETER MaxQueue
        Maximum number of powershell instances to add to runspace pool.  If this is higher than $throttle, $timeout will be inaccurate

        If this is equal or less than throttle, there will be a performance impact

        The default value is $throttle times 3, if $runspaceTimeout is not specified
        The default value is $throttle, if $runspaceTimeout is specified

    .PARAMETER LogFile
        Path to a file where we can log results, including run time for each thread, whether it completes, completes with errors, or times out.

    .PARAMETER AppendLog
        Append to existing log

    .PARAMETER Quiet
        Disable progress bar

    .EXAMPLE
        Each example uses Test-ForPacs.ps1 which includes the following code:
            param($computer)

            if(test-connection $computer -count 1 -quiet -BufferSize 16){
                $object = [pscustomobject] @{
                    Computer=$computer;
                    Available=1;
                    Kodak=$(
                        if((test-path "\\$computer\c$\users\public\desktop\Kodak Direct View Pacs.url") -or (test-path "\\$computer\c$\documents and settings\all users\desktop\Kodak Direct View Pacs.url") ){"1"}else{"0"}
                    )
                }
            }
            else{
                $object = [pscustomobject] @{
                    Computer=$computer;
                    Available=0;
                    Kodak="NA"
                }
            }

            $object

    .EXAMPLE
        Invoke-Parallel -scriptfile C:\public\Test-ForPacs.ps1 -inputobject $(get-content C:\pcs.txt) -runspaceTimeout 10 -throttle 10

            Pulls list of PCs from C:\pcs.txt,
            Runs Test-ForPacs against each
            If any query takes longer than 10 seconds, it is disposed
            Only run 10 threads at a time

    .EXAMPLE
        Invoke-Parallel -scriptfile C:\public\Test-ForPacs.ps1 -inputobject c-is-ts-91, c-is-ts-95

            Runs against c-is-ts-91, c-is-ts-95 (-computername)
            Runs Test-ForPacs against each

    .EXAMPLE
        $stuff = [pscustomobject] @{
            ContentFile = "windows\system32\drivers\etc\hosts"
            Logfile = "C:\temp\log.txt"
        }

        $computers | Invoke-Parallel -parameter $stuff {
            $contentFile = join-path "\\$_\c$" $parameter.contentfile
            Get-Content $contentFile |
                set-content $parameter.logfile
        }

        This example uses the parameter argument.  This parameter is a single object.  To pass multiple items into the script block, we create a custom object (using a PowerShell v3 language) with properties we want to pass in.

        Inside the script block, $parameter is used to reference this parameter object.  This example sets a content file, gets content from that file, and sets it to a predefined log file.

    .EXAMPLE
        $test = 5
        1..2 | Invoke-Parallel -ImportVariables {$_ * $test}

        Add variables from the current session to the session state.  Without -ImportVariables $Test would not be accessible

    .EXAMPLE
        $test = 5
        1..2 | Invoke-Parallel {$_ * $Using:test}

        Reference a variable from the current session with the $Using:<Variable> syntax.  Requires PowerShell 3 or later. Note that -ImportVariables parameter is no longer necessary.

    .FUNCTIONALITY
        PowerShell Language

    .NOTES
        Credit to Boe Prox for the base runspace code and $Using implementation
            http://learn-powershell.net/2012/05/10/speedy-network-information-query-using-powershell/
            http://gallery.technet.microsoft.com/scriptcenter/Speedy-Network-Information-5b1406fb#content
            https://github.com/proxb/PoshRSJob/

        Credit to T Bryce Yehl for the Quiet and NoCloseOnTimeout implementations

        Credit to Sergei Vorobev for the many ideas and contributions that have improved functionality, reliability, and ease of use

    .LINK
        https://github.com/RamblingCookieMonster/Invoke-Parallel
    #>
    [cmdletbinding(DefaultParameterSetName = 'ScriptBlock')]
    param (
        [Parameter(Position = 0, ParameterSetName = 'ScriptBlock')]
        [System.Management.Automation.ScriptBlock]$ScriptBlock,

        [Parameter(ParameterSetName = 'ScriptFile')]
        [ValidateScript( {Test-Path $_ -pathtype leaf})]
        $ScriptFile,

        [Parameter(Mandatory = $true, ValueFromPipeline = $true)]
        [Alias('CN', '__Server', 'IPAddress', 'Server', 'ComputerName')]
        [PSObject]$InputObject,

        [PSObject]$Parameter,

        [switch]$ImportVariables,
        [switch]$ImportModules,
        [switch]$ImportFunctions,

        [int]$Throttle = 20,
        [int]$SleepTimer = 200,
        [int]$RunspaceTimeout = 0,
        [switch]$NoCloseOnTimeout = $false,
        [int]$MaxQueue,

        [validatescript( {Test-Path (Split-Path $_ -parent)})]
        [switch] $AppendLog = $false,
        [string]$LogFile,

        [switch] $Quiet = $false
    )
    begin {
        # save default runspace
        $defaultrunspace = [System.Management.Automation.Runspaces.Runspace]::DefaultRunspace
        #No max queue specified?  Estimate one.
        #We use the script scope to resolve an odd PowerShell 2 issue where MaxQueue isn't seen later in the function
        if ( -not $PSBoundParameters.ContainsKey('MaxQueue') ) {
            if ($RunspaceTimeout -ne 0) { $script:MaxQueue = $Throttle }
            else { $script:MaxQueue = $Throttle * 3 }
        } else {
            $script:MaxQueue = $MaxQueue
        }
        $ProgressId = Get-Random
        Write-Verbose "Throttle: '$throttle' SleepTimer '$sleepTimer' runSpaceTimeout '$runspaceTimeout' maxQueue '$maxQueue' logFile '$logFile'"

        #If they want to import variables or modules, create a clean runspace, get loaded items, use those to exclude items
        if ($ImportVariables -or $ImportModules -or $ImportFunctions) {
            $StandardUserEnv = [powershell]::Create().addscript( {

                    #Get modules, snapins, functions in this clean runspace
                    $Modules = Get-Module | Select-Object -ExpandProperty Name
                    $Snapins = Get-PSSnapin | Select-Object -ExpandProperty Name
                    $Functions = Get-ChildItem function:\ | Select-Object -ExpandProperty Name

                    #Get variables in this clean runspace
                    #Called last to get vars like $? into session
                    $Variables = Get-Variable | Select-Object -ExpandProperty Name

                    #Return a hashtable where we can access each.
                    @{
                        Variables = $Variables
                        Modules   = $Modules
                        Snapins   = $Snapins
                        Functions = $Functions
                    }
                }).invoke()[0]

            if ($ImportVariables) {
                #Exclude common parameters, bound parameters, and automatic variables
                Function _temp {[cmdletbinding(SupportsShouldProcess)] param() }
                $VariablesToExclude = @( (Get-Command _temp | Select-Object -ExpandProperty parameters).Keys + $PSBoundParameters.Keys + $StandardUserEnv.Variables )
                Write-Verbose "Excluding variables $( ($VariablesToExclude | Sort-Object ) -join ", ")"

                # we don't use 'Get-Variable -Exclude', because it uses regexps.
                # One of the veriables that we pass is '$?'.
                # There could be other variables with such problems.
                # Scope 2 required if we move to a real module
                $UserVariables = @( Get-Variable | Where-Object { -not ($VariablesToExclude -contains $_.Name) } )
                Write-Verbose "Found variables to import: $( ($UserVariables | Select-Object -expandproperty Name | Sort-Object ) -join ", " | Out-String).`n"
            }
            if ($ImportModules) {
                $UserModules = @( Get-Module | Where-Object {$StandardUserEnv.Modules -notcontains $_.Name -and (Test-Path $_.Path -ErrorAction SilentlyContinue)} | Select-Object -ExpandProperty Path )
                $UserSnapins = @( Get-PSSnapin | Select-Object -ExpandProperty Name | Where-Object {$StandardUserEnv.Snapins -notcontains $_ } )
            }
            if ($ImportFunctions) {
                $UserFunctions = @( Get-ChildItem function:\ | Where-Object { $StandardUserEnv.Functions -notcontains $_.Name } )
            }
        }

        #region functions
        Function Get-RunspaceData {
            [cmdletbinding()]
            param( [switch]$Wait )
            #loop through runspaces
            #if $wait is specified, keep looping until all complete
            Do {
                #set more to false for tracking completion
                $more = $false

                #Progress bar if we have inputobject count (bound parameter)
                if (-not $Quiet) {
                    Write-Progress -Id $ProgressId -Activity "Running Query" -Status "Starting threads"`
                        -CurrentOperation "$startedCount threads defined - $totalCount input objects - $script:completedCount input objects processed"`
                        -PercentComplete $( Try { $script:completedCount / $totalCount * 100 } Catch {0} )
                }

                #run through each runspace.
                Foreach ($runspace in $runspaces) {

                    #get the duration - inaccurate
                    $currentdate = Get-Date
                    $runtime = $currentdate - $runspace.startTime
                    $runMin = [math]::Round( $runtime.totalminutes , 2 )

                    #set up log object
                    $log = "" | Select-Object Date, Action, Runtime, Status, Details
                    $log.Action = "Removing:'$($runspace.object)'"
                    $log.Date = $currentdate
                    $log.Runtime = "$runMin minutes"

                    #If runspace completed, end invoke, dispose, recycle, counter++
                    If ($runspace.Runspace.isCompleted) {

                        $script:completedCount++

                        #check if there were errors
                        if ($runspace.powershell.Streams.Error.Count -gt 0) {
                            #set the logging info and move the file to completed
                            $log.status = "CompletedWithErrors"
                            Write-Verbose ($log | ConvertTo-Csv -Delimiter ";" -NoTypeInformation)[1]
                            foreach ($ErrorRecord in $runspace.powershell.Streams.Error) {
                                Write-Error -ErrorRecord $ErrorRecord
                            }
                        } else {
                            #add logging details and cleanup
                            $log.status = "Completed"
                            Write-Verbose ($log | ConvertTo-Csv -Delimiter ";" -NoTypeInformation)[1]
                        }

                        #everything is logged, clean up the runspace
                        $runspace.powershell.EndInvoke($runspace.Runspace)
                        $runspace.powershell.dispose()
                        $runspace.Runspace = $null
                        $runspace.powershell = $null
                    }
                    #If runtime exceeds max, dispose the runspace
                    ElseIf ( $runspaceTimeout -ne 0 -and $runtime.totalseconds -gt $runspaceTimeout) {
                        $script:completedCount++
                        $timedOutTasks = $true

                        #add logging details and cleanup
                        $log.status = "TimedOut"
                        Write-Verbose ($log | ConvertTo-Csv -Delimiter ";" -NoTypeInformation)[1]
                        Write-Error "Runspace timed out at $($runtime.totalseconds) seconds for the object:`n$($runspace.object | out-string)"

                        #Depending on how it hangs, we could still get stuck here as dispose calls a synchronous method on the powershell instance
                        if (!$noCloseOnTimeout) { $runspace.powershell.dispose() }
                        $runspace.Runspace = $null
                        $runspace.powershell = $null
                        $completedCount++
                    }

                    #If runspace isn't null set more to true
                    ElseIf ($runspace.Runspace -ne $null ) {
                        $log = $null
                        $more = $true
                    }

                    #log the results if a log file was indicated
                    if ($logFile -and $log) {
                        ($log | ConvertTo-Csv -Delimiter ";" -NoTypeInformation)[1] | out-file $LogFile -append
                    }
                }

                #Clean out unused runspace jobs
                $temphash = $runspaces.clone()
                $temphash | Where-Object { $_.runspace -eq $Null } | ForEach-Object {
                    $Runspaces.remove($_)
                }

                #sleep for a bit if we will loop again
                if ($PSBoundParameters['Wait']) { Start-Sleep -milliseconds $SleepTimer }

                #Loop again only if -wait parameter and there are more runspaces to process
            } while ($more -and $PSBoundParameters['Wait'])

            #End of runspace function
        }
        #endregion functions

        #region Init

        if ($PSCmdlet.ParameterSetName -eq 'ScriptFile') {
            $ScriptBlock = [scriptblock]::Create( $(Get-Content $ScriptFile | out-string) )
        } elseif ($PSCmdlet.ParameterSetName -eq 'ScriptBlock') {
            #Start building parameter names for the param block
            [string[]]$ParamsToAdd = '$_'
            if ( $PSBoundParameters.ContainsKey('Parameter') ) {
                $ParamsToAdd += '$Parameter'
            }

            $UsingVariableData = $Null

            # This code enables $Using support through the AST.
            # This is entirely from  Boe Prox, and his https://github.com/proxb/PoshRSJob module; all credit to Boe!

            if ($PSVersionTable.PSVersion.Major -gt 2) {
                #Extract using references
                $UsingVariables = $ScriptBlock.ast.FindAll( {$args[0] -is [System.Management.Automation.Language.UsingExpressionAst]}, $True)

                If ($UsingVariables) {
                    $List = New-Object 'System.Collections.Generic.List`1[System.Management.Automation.Language.VariableExpressionAst]'
                    ForEach ($Ast in $UsingVariables) {
                        [void]$list.Add($Ast.SubExpression)
                    }

                    $UsingVar = $UsingVariables | Group-Object -Property SubExpression | ForEach-Object {$_.Group | Select-Object -First 1}

                    #Extract the name, value, and create replacements for each
                    $UsingVariableData = ForEach ($Var in $UsingVar) {
                        try {
                            $Value = Get-Variable -Name $Var.SubExpression.VariablePath.UserPath -ErrorAction Stop
                            [pscustomobject]@{
                                Name       = $Var.SubExpression.Extent.Text
                                Value      = $Value.Value
                                NewName    = ('$__using_{0}' -f $Var.SubExpression.VariablePath.UserPath)
                                NewVarName = ('__using_{0}' -f $Var.SubExpression.VariablePath.UserPath)
                            }
                        } catch {
                            Write-Error "$($Var.SubExpression.Extent.Text) is not a valid Using: variable!"
                        }
                    }
                    $ParamsToAdd += $UsingVariableData | Select-Object -ExpandProperty NewName -Unique

                    $NewParams = $UsingVariableData.NewName -join ', '
                    $Tuple = [Tuple]::Create($list, $NewParams)
                    $bindingFlags = [Reflection.BindingFlags]"Default,NonPublic,Instance"
                    $GetWithInputHandlingForInvokeCommandImpl = ($ScriptBlock.ast.gettype().GetMethod('GetWithInputHandlingForInvokeCommandImpl', $bindingFlags))

                    $StringScriptBlock = $GetWithInputHandlingForInvokeCommandImpl.Invoke($ScriptBlock.ast, @($Tuple))

                    $ScriptBlock = [scriptblock]::Create($StringScriptBlock)

                    Write-Verbose $StringScriptBlock
                }
            }

            $ScriptBlock = $ExecutionContext.InvokeCommand.NewScriptBlock("param($($ParamsToAdd -Join ", "))`r`n" + $Scriptblock.ToString())
        } else {
            Throw "Must provide ScriptBlock or ScriptFile"; Break
        }

        Write-Debug "`$ScriptBlock: $($ScriptBlock | Out-String)"
        Write-Verbose "Creating runspace pool and session states"

        #If specified, add variables and modules/snapins to session state
        $sessionstate = [System.Management.Automation.Runspaces.InitialSessionState]::CreateDefault()
        $sessionstate.Variables.Add((New-Object -TypeName System.Management.Automation.Runspaces.SessionStateVariableEntry -ArgumentList 'WarningPreference', 'SilentlyContinue', $null))
        if ($ImportVariables -and $UserVariables.count -gt 0) {
            foreach ($Variable in $UserVariables) {
                $sessionstate.Variables.Add((New-Object -TypeName System.Management.Automation.Runspaces.SessionStateVariableEntry -ArgumentList $Variable.Name, $Variable.Value, $null) )
            }
        }
        if ($ImportModules) {
            if ($UserModules.count -gt 0) {
                foreach ($ModulePath in $UserModules) {
                    $sessionstate.ImportPSModule($ModulePath)
                }
            }
            if ($UserSnapins.count -gt 0) {
                foreach ($PSSnapin in $UserSnapins) {
                    [void]$sessionstate.ImportPSSnapIn($PSSnapin, [ref]$null)
                }
            }
        }
        if ($ImportFunctions -and $UserFunctions.count -gt 0) {
            foreach ($FunctionDef in $UserFunctions) {
                $sessionstate.Commands.Add((New-Object System.Management.Automation.Runspaces.SessionStateFunctionEntry -ArgumentList $FunctionDef.Name, $FunctionDef.ScriptBlock))
            }
        }

        #Create runspace pool
        $runspacepool = [runspacefactory]::CreateRunspacePool(1, $Throttle, $sessionstate, $Host)
        $runspacepool.Open()

        Write-Verbose "Creating empty collection to hold runspace jobs"
        $Script:runspaces = New-Object System.Collections.ArrayList

        #If inputObject is bound get a total count and set bound to true
        $bound = $PSBoundParameters.keys -contains "InputObject"
        if (-not $bound) {
            [System.Collections.ArrayList]$allObjects = @()
        }

        #Set up log file if specified
        if ( $LogFile -and (-not (Test-Path $LogFile) -or $AppendLog -eq $false)) {
            New-Item -ItemType file -Path $logFile -Force | Out-Null
            ("" | Select-Object -Property Date, Action, Runtime, Status, Details | ConvertTo-Csv -NoTypeInformation -Delimiter ";")[0] | Out-File $LogFile
        }

        #write initial log entry
        $log = "" | Select-Object -Property Date, Action, Runtime, Status, Details
        $log.Date = Get-Date
        $log.Action = "Batch processing started"
        $log.Runtime = $null
        $log.Status = "Started"
        $log.Details = $null
        if ($logFile) {
            ($log | convertto-csv -Delimiter ";" -NoTypeInformation)[1] | Out-File $LogFile -Append
        }
        $timedOutTasks = $false
        #endregion INIT
    }
    process {
        #add piped objects to all objects or set all objects to bound input object parameter
        if ($bound) {
            $allObjects = $InputObject
        } else {
            [void]$allObjects.add( $InputObject )
        }
    }
    end {
        #Use Try/Finally to catch Ctrl+C and clean up.
        try {
            #counts for progress
            $totalCount = $allObjects.count
            $script:completedCount = 0
            $startedCount = 0
            foreach ($object in $allObjects) {
                #region add scripts to runspace pool
                #Create the powershell instance, set verbose if needed, supply the scriptblock and parameters
                $powershell = [powershell]::Create()

                if ($VerbosePreference -eq 'Continue') {
                    [void]$PowerShell.AddScript( {$VerbosePreference = 'Continue'})
                }

                [void]$PowerShell.AddScript($ScriptBlock).AddArgument($object)

                if ($parameter) {
                    [void]$PowerShell.AddArgument($parameter)
                }

                # $Using support from Boe Prox
                if ($UsingVariableData) {
                    Foreach ($UsingVariable in $UsingVariableData) {
                        Write-Verbose "Adding $($UsingVariable.Name) with value: $($UsingVariable.Value)"
                        [void]$PowerShell.AddArgument($UsingVariable.Value)
                    }
                }

                #Add the runspace into the powershell instance
                $powershell.RunspacePool = $runspacepool

                #Create a temporary collection for each runspace
                $temp = "" | Select-Object PowerShell, StartTime, object, Runspace
                $temp.PowerShell = $powershell
                $temp.StartTime = Get-Date
                $temp.object = $object

                #Save the handle output when calling BeginInvoke() that will be used later to end the runspace
                $temp.Runspace = $powershell.BeginInvoke()
                $startedCount++

                #Add the temp tracking info to $runspaces collection
                Write-Verbose ( "Adding {0} to collection at {1}" -f $temp.object, $temp.starttime.tostring() )
                $runspaces.Add($temp) | Out-Null

                #loop through existing runspaces one time
                Get-RunspaceData

                #If we have more running than max queue (used to control timeout accuracy)
                #Script scope resolves odd PowerShell 2 issue
                $firstRun = $true
                while ($runspaces.count -ge $Script:MaxQueue) {
                    #give verbose output
                    if ($firstRun) {
                        Write-Verbose "$($runspaces.count) items running - exceeded $Script:MaxQueue limit."
                    }
                    $firstRun = $false

                    #run get-runspace data and sleep for a short while
                    Get-RunspaceData
                    Start-Sleep -Milliseconds $sleepTimer
                }
                #endregion add scripts to runspace pool
            }
            Write-Verbose ( "Finish processing the remaining runspace jobs: {0}" -f ( @($runspaces | Where-Object {$_.Runspace -ne $Null}).Count) )

            Get-RunspaceData -wait
            if (-not $quiet) {
                Write-Progress -Id $ProgressId -Activity "Running Query" -Status "Starting threads" -Completed
            }
        } finally {
            #Close the runspace pool, unless we specified no close on timeout and something timed out
            if ( ($timedOutTasks -eq $false) -or ( ($timedOutTasks -eq $true) -and ($noCloseOnTimeout -eq $false) ) ) {
                Write-Verbose "Closing the runspace pool"
                $runspacepool.close()
            }
            #collect garbage
            [gc]::Collect()
        }
        [System.Management.Automation.Runspaces.Runspace]::DefaultRunspace = $defaultrunspace
    }
}

tools\dbatools\internal\functions\Get-SqlSaLogin.ps1

function Get-SqlSaLogin {
    <#
        .SYNOPSIS
            Internal function. Gets the name of the sa login in case someone changed it.
        .PARAMETER SqlInstance
            The SQL Server instance.
        .PARAMETER SqlCredential
            Allows you to login to servers using SQL Logins instead of Windows Authentication (AKA Integrated or Trusted).
       #>
    [CmdletBinding()]
    param (
        [Parameter(Mandatory)]
        [Alias("ServerInstance", "SqlServer")]
        [object]$SqlInstance,
        [PSCredential]$SqlCredential
    )
    $server = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential
    $sa = $server.Logins | Where-Object Id -eq 1
    return $sa.Name
}

tools\dbatools\internal\functions\Get-SqlServerUpdate.ps1

function Get-SqlServerUpdate {
    <#
    Originally based on https://github.com/adbertram/PSSqlUpdater
    Internal function. Provides information on the update path for a specific set of SQL Server instances based on current and target SQL Server levels.
    Component parameter is using the output object of Get-SqlInstanceComponent.
    #>
    [CmdletBinding(DefaultParameterSetName = 'Latest')]
    param
    (
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [DbaInstanceParameter]$ComputerName,
        [pscredential]$Credential,
        [Parameter(Mandatory, ParameterSetName = 'Latest')]
        [ValidateSet('ServicePack', 'CumulativeUpdate')]
        [string]$Type,
        [object[]]$Component,
        [Parameter(ParameterSetName = 'Number')]
        [int]$ServicePack,
        [Parameter(ParameterSetName = 'Number')]
        [int]$CumulativeUpdate,
        [Parameter(Mandatory, ParameterSetName = 'KB')]
        [ValidateNotNullOrEmpty()]
        [string]$KB,
        [bool]$Restart,
        [string]$InstanceName,
        [string[]]$Path,
        [bool]$EnableException = $EnableException,
        [bool]$Continue
    )
    process {

        # check if any type of the update was specified
        if ($PSCmdlet.ParameterSetName -eq 'Number' -and -not ((Test-Bound ServicePack) -or (Test-Bound CumulativeUpdate))) {
            Stop-Function -Message "No update was specified, provide at least one value for either SP/CU"
            return
        }
        $computer = $ComputerName.ComputerName
        $verCount = ($Component | Measure-Object).Count
        $verDesc = ($Component | Foreach-Object { "$($_.Version.NameLevel) ($($_.Version.Build))" }) -join ', '
        Write-Message -Level Debug -Message "Selected $verCount existing SQL Server version(s): $verDesc"

        # Group by version
        $currentVersionGroups = $Component | Group-Object -Property { $_.Version.NameLevel }
        #Check if more than one version is found
        if (($currentVersionGroups | Measure-Object ).Count -gt 1 -and ($CumulativeUpdate -or $ServicePack) -and !$MajorVersion) {
            Stop-Function -Message "Updating multiple different versions of SQL Server to a specific SP/CU is not supported. Please specify a version of SQL Server on $computer that you want to update."
            return
        }
        ## Find the architecture of the computer
        if ($arch = (Get-DbaCmObject -ComputerName $computer -ClassName 'Win32_ComputerSystem').SystemType) {
            if ($arch -eq 'x64-based PC') {
                $arch = 'x64'
            } else {
                $arch = 'x86'
            }
        } else {
            Write-Message -Level Warning -Message "Failed to determine the arch of $computer, using x64 by default"
            $arch = 'x64'
        }
        $targetLevel = ''
        # Launch a setup sequence for each version found
        foreach ($currentGroup in $currentVersionGroups) {
            $currentMajorVersion = "SQL" + $currentGroup.Name
            $currentMajorNumber = $currentGroup.Name

            # Use the earliest version in case specifics are needed
            $currentVersion = $currentGroup.Group | Sort-Object -Property { $_.Version.BuildLevel } | Select-Object -ExpandProperty Version -First 1

            #create output object
            $output = [pscustomobject]@{
                ComputerName  = $ComputerName
                MajorVersion  = $currentMajorNumber
                Build         = $currentVersion.Build
                TargetVersion = $null
                TargetLevel   = $null
                KB            = $null
                Successful    = $false
                Restarted     = $false
                InstanceName  = $InstanceName
                Installer     = $null
                ExtractPath   = $null
                Notes         = $null
                ExitCode      = $null
                Log           = $null
            }

            # create a parameter set for Find-SqlServerUpdate
            $kbLookupParams = @{
                Architecture = $arch
                MajorVersion = $currentGroup.Name
                Path         = $Path
            }
            # Find target KB number based on provided SP/CU levels or KB numbers
            if ($CumulativeUpdate -gt 0) {
                #Cumulative update is present - installing CU
                if (Test-Bound -Parameter ServicePack) {
                    #Service pack is present - using it as a reference
                    $targetKB = Get-DbaBuildReference -MajorVersion $currentMajorNumber -ServicePack $ServicePack -CumulativeUpdate $CumulativeUpdate
                } else {
                    #Service pack not present - using current SP level
                    $targetSP = $currentVersion.SPLevel | Where-Object { $_ -ne 'LATEST' } | Select-Object -First 1
                    $targetKB = Get-DbaBuildReference -MajorVersion $currentMajorNumber -ServicePack $targetSP -CumulativeUpdate $CumulativeUpdate
                }
            } elseif ($ServicePack -gt 0) {
                #Service pack number was passed without CU - installing service pack
                $targetKB = Get-DbaBuildReference -MajorVersion $currentMajorNumber -ServicePack $ServicePack
            } elseif ($KB) {
                $targetKB = Get-DbaBuildReference -KB $KB
                if ($targetKB -and $currentMajorNumber -ne $targetKB.NameLevel) {
                    Write-Message -Level Debug -Message "$($targetKB.NameLevel) is not a target Major version $($currentMajorNumber), skipping"
                    continue
                }
            } else {
                #No parameters = latest patch. Find latest SQL Server build and corresponding SP and CU KBs
                $latestCU = Test-DbaBuild -Build $currentVersion.BuildLevel -MaxBehind '0CU'
                if (!$latestCU.Compliant) {
                    #more recent build is found, get KB number depending on what is the current upgrade $Type
                    $targetKB = Get-DbaBuildReference -Build $latestCU.BuildTarget
                    $targetSP = $targetKB.SPLevel | Where-Object { $_ -ne 'LATEST' } | Select-Object -First 1
                    if ($Type -eq 'CumulativeUpdate') {
                        if ($currentVersion.SPLevel -notcontains 'LATEST') {
                            $currentSP = $currentVersion.SPLevel | Where-Object { $_ -ne 'LATEST' } | Select-Object -First 1
                            Stop-Function -Message "Current SP version $currentMajorVersion$currentSP is not the latest available. Make sure to upgade to latest SP level before applying latest CU." -Continue
                        }
                        $targetLevel = "$($targetKB.SPLevel | Where-Object { $_ -ne 'LATEST' })$($targetKB.CULevel)"
                        Write-Message -Level Debug -Message "Found a latest Cumulative Update $targetLevel (KB$($targetKB.KBLevel))"
                    } elseif ($Type -eq 'ServicePack') {
                        $targetKB = Get-DbaBuildReference -MajorVersion $targetKB.NameLevel -ServicePack $targetSP
                        $targetLevel = $targetKB.SPLevel | Where-Object { $_ -ne 'LATEST' }
                        if ($currentVersion.SPLevel -contains 'LATEST') {
                            Write-Message -Message "No need to update $currentMajorVersion to $targetLevel - it's already on the latest SP version" -Level Verbose
                            continue
                        }
                        Write-Message -Level Debug -Message "Found a latest Service Pack $targetLevel (KB$($targetKB.KBLevel))"
                    }
                } else {
                    Write-Message -Message "$($currentVersion.Build) on computer [$($computer)] is already the latest available." -Level Verbose
                    continue
                }
            }
            if ($targetKB.KBLevel) {
                if ($targetKB.MatchType -ne 'Exact') {
                    Stop-Function -Message "Couldn't find an exact build match with specified parameters while updating $currentMajorVersion" -Continue
                }
                $output.TargetVersion = $targetKB
                $targetLevel = "$($targetKB.SPLevel | Where-Object { $_ -ne 'LATEST' })$($targetKB.CULevel)"
                $targetKBLevel = $targetKB.KBLevel | Select-Object -First 1
                Write-Message -Level Verbose -Message "Upgrading SQL$($targetKB.NameLevel) to $targetLevel (KB$($targetKBLevel))"
                $kbLookupParams.KB = $targetKBLevel
            } else {
                $output.Notes = "Could not find a KB$KB reference for $currentMajorVersion SP $ServicePack CU $CumulativeUpdate"
                $output
                Stop-Function -Message $output.Notes -Continue
            }

            # Compare versions - whether to proceed with the installation
            $needsUpgrade = $false
            foreach ($currentComponent in $currentGroup.Group) {
                $groupVersion = $currentComponent.Version
                #target version is less than requested
                if ($groupVersion.BuildLevel -lt $targetKB.BuildLevel) {
                    $needsUpgrade = $true
                }
                #target version is the same but installation has failed last time
                elseif ($groupVersion.BuildLevel -eq $targetKB.BuildLevel -and $Continue -and $currentComponent.Resume) {
                    $needsUpgrade = $true
                }
            }
            if (!$needsUpgrade) {
                Write-Message -Message "Current $currentMajorVersion version $($currentVersion.BuildLevel) on computer [$($computer)] matches or already higher than target version $($targetKB.BuildLevel)" -Level Verbose
                continue
            }

            $output.TargetLevel = $targetLevel
            $output.KB = $kbLookupParams.KB
            ## Find the installer to use

            $installer = Find-SqlServerUpdate @kbLookupParams
            if (!$installer) {
                $output.Notes = "Could not find installer for the $currentMajorVersion update KB$($kbLookupParams.KB)"
                $output
                Stop-Function -Message $output.Notes -Continue
            }
            $output.Installer = $installer.FullName
            $output.Successful = $true
            #Return the object for further processing
            $output
        }
    }
}

tools\dbatools\internal\functions\flowcontrol\Invoke-SteppablePipeline.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Invoke-SteppablePipeline {
    <#
    .SYNOPSIS
        Allows using steppable pipelines on the pipeline.

    .DESCRIPTION
        Allows using steppable pipelines on the pipeline.

    .PARAMETER InputObject
        The object(s) to process
        Should only receive input from the pipeline!

    .PARAMETER Pipeline
        The pipeline to execute

    .EXAMPLE
        PS C:\> Get-ChildItem | Invoke-SteppablePipeline -Pipeline $steppablePipeline

        Processes the object returned by Get-ChildItem in the pipeline defined
    #>
    [CmdletBinding()]
    param (
        [Parameter(ValueFromPipeline)]
        $InputObject,

        [Parameter(Mandatory)]
        $Pipeline
    )

    process {
        $Pipeline.Process($InputObject)
    }
}

tools\dbatools\internal\functions\flowcontrol\Stop-Function.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#

function Stop-Function {
    <#
    .SYNOPSIS
        Function that interrupts a function.

    .DESCRIPTION
        Function that interrupts a function.

        This function is a utility function used by other functions to reduce error catching overhead.
        It is designed to allow gracefully terminating a function with a warning by default and also allow opt-in into terminating errors.
        It also allows simple integration into loops.

        Note:
        When calling this function with the intent to terminate the calling function in non-EnableException mode too, you need to add a return below the call.

    .PARAMETER Message
        A message to pass along, explaining just what the error was.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER Category
        What category does this termination belong to?
        Mandatory so long as no inner exception is passed.

    .PARAMETER ErrorRecord
        An option to include an inner exception in the error record (and in the exception thrown, if one is thrown).
        Use this, whenever you call Stop-Function in a catch block.

        Note:
        Pass the full error record, not just the exception.

    .PARAMETER Tag
        Tags to add to the message written.
        This allows filtering and grouping by category of message, targeting specific messages.

    .PARAMETER FunctionName
        The name of the function to crash.
        This parameter is very optional, since it automatically selects the name of the calling function.
        The function name is used as part of the errorid.
        That in turn allows easily figuring out, which exception belonged to which function when checking out the $error variable.

    .PARAMETER File
        The file in which Stop-Function was called.
        Will be automatically set, but can be overridden when necessary.

    .PARAMETER Line
        The line on which Stop-Function was called.
        Will be automatically set, but can be overridden when necessary.

    .PARAMETER Target
        The object that was processed when the error was thrown.
        For example, if you were trying to process a Database Server object when the processing failed, add the object here.
        This object will be in the error record (which will be written, even in non-EnableException mode, just won't show it).
        If you specify such an object, it becomes simple to actually figure out, just where things failed at.

    .PARAMETER Exception
        Allows specifying an inner exception as input object. This will be passed on to the logging and used for messages.
        When specifying both ErrorRecord AND Exception, Exception wins, but ErrorRecord is still used for record metadata.

    .PARAMETER OverrideExceptionMessage
        Disables automatic appending of exception messages.
        Use in cases where you already have a speaking message interpretation and do not need the original message.

    .PARAMETER Continue
        This will cause the function to call continue while not running silently.
        Useful when mass-processing items where an error shouldn't break the loop.

    .PARAMETER SilentlyContinue
        This will cause the function to call continue while running silently.
        Useful when mass-processing items where an error shouldn't break the loop.

    .PARAMETER ContinueLabel
        When specifying a label in combination with "-Continue" or "-SilentlyContinue", this function will call continue with this specified label.
        Helpful when trying to continue on an upper level named loop.

    .EXAMPLE
        Stop-Function -Message "Foo failed bar!" -EnableException $EnableException -ErrorRecord $_
        return

        Depending on whether $EnableException is true or false it will:
        - Throw a bloody terminating error. Game over.
        - Write a nice warning about how Foo failed bar, then terminate the function. The return on the next line will then end the calling function.

    .EXAMPLE
        Stop-Function -Message "Foo failed bar!" -EnableException $EnableException -Category InvalidOperation -Target $foo -Continue

        Depending on whether $silent is true or false it will:
        - Throw a bloody terminating error. Game over.
        - Write a nice warning about how Foo failed bar, then call continue to process the next item in the loop.
        In both cases, the error record added to $error will have the content of $foo added, the better to figure out what went wrong.
    #>
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseShouldProcessForStateChangingFunctions", "")]
    [CmdletBinding(DefaultParameterSetName = 'Plain')]
    param (
        [Parameter(Mandatory)]
        [string]
        $Message,

        [bool]
        [Alias('Silent')]
        $EnableException = $EnableException,

        [Parameter(ParameterSetName = 'Plain')]
        [Parameter(ParameterSetName = 'Exception')]
        [System.Management.Automation.ErrorCategory]
        $Category = ([System.Management.Automation.ErrorCategory]::NotSpecified),

        [Parameter(ParameterSetName = 'Exception')]
        [Alias('InnerErrorRecord')]
        [System.Management.Automation.ErrorRecord[]]
        $ErrorRecord,

        [string[]]
        $Tag,

        [string]
        $FunctionName = ((Get-PSCallStack)[0].Command),

        [string]
        $File,

        [int]
        $Line,

        [object]
        $Target,

        [System.Exception]
        $Exception,

        [switch]
        $OverrideExceptionMessage,

        [switch]
        $Continue,

        [switch]
        $SilentlyContinue,

        [string]
        $ContinueLabel
    )

    #region Initialize information on the calling command
    $callStack = (Get-PSCallStack)[1]
    if (-not $FunctionName) { $FunctionName = $callStack.Command }
    $ModuleName = "dbatools"
    if (-not $File) { $File = $callStack.Position.File }
    if (-not $Line) { $Line = $callStack.Position.StartLineNumber }
    #endregion Initialize information on the calling command

    #region Apply Transforms
    #region Target Transform
    if ($null -ne $Target) {
        $Target = Convert-DbaMessageTarget -Target $Target -FunctionName $FunctionName -ModuleName $ModuleName
    }
    #endregion Target Transform

    #region Exception Transforms
    if ($Exception) {
        $Exception = Convert-DbaMessageException -Exception $Exception -FunctionName $FunctionName -ModuleName $ModuleName
    } elseif ($ErrorRecord) {
        $int = 0
        while ($int -lt $ErrorRecord.Length) {
            $tempException = Convert-DbaMessageException -Exception $ErrorRecord[$int].Exception -FunctionName $FunctionName -ModuleName $ModuleName
            if ($tempException -ne $ErrorRecord[$int].Exception) {
                $ErrorRecord[$int] = New-Object System.Management.Automation.ErrorRecord($tempException, $ErrorRecord[$int].FullyQualifiedErrorId, $ErrorRecord[$int].CategoryInfo.Category, $ErrorRecord[$int].TargetObject)
            }

            $int++
        }
    }
    #endregion Exception Transforms
    #endregion Apply Transforms

    #region Message Handling
    $records = @()

    if ($ErrorRecord -or $Exception) {
        if ($ErrorRecord) {
            foreach ($record in $ErrorRecord) {
                $msg = Get-ErrorMessage -Record $record
                if (-not $Exception) { $newException = New-Object System.Exception($msg, $record.Exception) }
                else { $newException = $Exception }
                if ($record.CategoryInfo.Category) { $Category = $record.CategoryInfo.Category }
                $records += New-Object System.Management.Automation.ErrorRecord($newException, "$($ModuleName)_$FunctionName", $Category, $Target)
            }
        } else {
            $records += New-Object System.Management.Automation.ErrorRecord($Exception, "$($ModuleName)_$FunctionName", $Category, $Target)
        }

        # Manage Debugging
        if ($EnableException) { Write-Message -Level Warning -Message $Message -EnableException $EnableException -FunctionName $FunctionName -Target $Target -ErrorRecord $records -Tag $Tag -ModuleName $ModuleName -OverrideExceptionMessage:$OverrideExceptionMessage -File $File -Line $Line 3>$null }
        else { Write-Message -Level Warning -Message $Message -EnableException $EnableException -FunctionName $FunctionName -Target $Target -ErrorRecord $records -Tag $Tag -ModuleName $ModuleName -OverrideExceptionMessage:$OverrideExceptionMessage -File $File -Line $Line }
    } else {
        $exception = New-Object System.Exception($Message)
        $records += New-Object System.Management.Automation.ErrorRecord($Exception, "dbatools_$FunctionName", $Category, $Target)

        # Manage Debugging
        if ($EnableException) { Write-Message -Level Warning -Message $Message -EnableException $EnableException -FunctionName $FunctionName -Target $Target -ErrorRecord $records -Tag $Tag -ModuleName $ModuleName -OverrideExceptionMessage:$true -File $File -Line $Line 3>$null}
        else { Write-Message -Level Warning -Message $Message -EnableException $EnableException -FunctionName $FunctionName -Target $Target -ErrorRecord $records -Tag $Tag -ModuleName $ModuleName -OverrideExceptionMessage:$true -File $File -Line $Line }
    }
    #endregion Message Handling



    #region EnableException Mode
    if ($EnableException) {
        if ($SilentlyContinue) {
            foreach ($record in $records) { Write-Error -Message $record -Category $Category -TargetObject $Target -Exception $record.Exception -ErrorId "dbatools_$FunctionName" -ErrorAction Continue }
            if ($ContinueLabel) { continue $ContinueLabel }
            else { Continue }
        }

        # Extra insurance that it'll stop
        Set-Variable -Name "__dbatools_interrupt_function_78Q9VPrM6999g6zo24Qn83m09XF56InEn4hFrA8Fwhu5xJrs6r" -Scope 1 -Value $true

        throw $records[0]
    }
    #endregion EnableException Mode

    #region Non-EnableException Mode
    else {
        # This ensures that the error is stored in the $error variable AND has its Stacktrace (simply adding the record would lack the stacktrace)
        foreach ($record in $records) {
            $null = Write-Error -Message $record -Category $Category -TargetObject $Target -Exception $record.Exception -ErrorId "dbatools_$FunctionName" -ErrorAction Continue 2>&1
        }

        if ($Continue) {
            if ($ContinueLabel) { continue $ContinueLabel }
            else { Continue }
        } else {
            # Make sure the function knows it should be stopping
            Set-Variable -Name "__dbatools_interrupt_function_78Q9VPrM6999g6zo24Qn83m09XF56InEn4hFrA8Fwhu5xJrs6r" -Scope 1 -Value $true

            return
        }
    }
    #endregion Non-EnableException Mode
}

tools\dbatools\internal\functions\flowcontrol\Test-Bound.ps1

function Test-Bound {
    <#
        .SYNOPSIS
            Helperfunction that tests, whether a parameter was bound.

        .DESCRIPTION
            Helperfunction that tests, whether a parameter was bound.

        .PARAMETER ParameterName
            The name(s) of the parameter that is tested for being bound.
            By default, the check is true when AT LEAST one was bound.

        .PARAMETER Not
            Reverses the result. Returns true if NOT bound and false if bound.

        .PARAMETER And
            All specified parameters must be present, rather than at least one of them.

        .PARAMETER BoundParameters
            The hashtable of bound parameters. Is automatically inherited from the calling function via default value. Needs not be bound explicitly.

        .EXAMPLE
            if (Test-Bound "Day")
            {

            }

            Snippet as part of a function. Will check whether the parameter "Day" was bound. If yes, whatever logic is in the conditional will be executed.

        .EXAMPLE
            Test-Bound -Not 'Login', 'Spid', 'ExcludeSpid', 'Host', 'Program', 'Database'

            Returns whether none of the parameters above were specified.

        .EXAMPLE
            Test-Bound -And 'Login', 'Spid', 'ExcludeSpid', 'Host', 'Program', 'Database'

            Returns whether any of the specified parameters was not bound
       #>
    [CmdletBinding()]
    param (
        [Parameter(Mandatory, Position = 0)]
        [string[]]
        $ParameterName,

        [Alias('Reverse')]
        [switch]
        $Not,

        [switch]
        $And,

        [object]
        $BoundParameters = (Get-PSCallStack)[0].InvocationInfo.BoundParameters
    )

    if ($And) {
        $test = $true
    } else {
        $test = $false
    }

    foreach ($name in $ParameterName) {
        if ($And) {
            if (-not $BoundParameters.ContainsKey($name)) { $test = $false }
        } else {
            if ($BoundParameters.ContainsKey($name)) { $test = $true }
        }
    }

    return ((-not $Not) -eq $test)
}

tools\dbatools\internal\functions\flowcontrol\Test-DbaDeprecation.ps1

function Test-DbaDeprecation {
    <#
        .SYNOPSIS
            Tests whether a function or one of its parameters was called by a bad name.

        .DESCRIPTION
            Tests whether a function or one of its parameters was called by a bad name.
            This allows giving deprecation warnings - once per session - whenever a user uses something we are planning on removing.

            For example, when renaming a function, we give a grace period by adding an Alias for that function with its old name.
            However, we do not want to carry along this alias forever, so we give warning ahead of time using this function.
            When reaching the specified version, we then can safely remove the alias.

            Furthermore, this function is used for testing, whether such a removal was properly done.

        .PARAMETER DeprecatedOn
            The version this parameter or alias will be removed in.
            Generally, deprecated parameters and aliases should only be removed on major releases.

        .PARAMETER FunctionName
            Automatically filled with the calling function.
            The name of the function that contains either a deprecated alias or parameter.

        .PARAMETER Call
            The InvocationInfo of the calling function.
            Automatically filled.

        .PARAMETER Parameter
            The parameter that has become deprecated.
            On renamed parameters, keep a parameter-alias. This function will notice, when the alias is used.

        .PARAMETER Alias
            The alias of the command that will be deprecated.

        .PARAMETER CustomMessage
            This function will generate a default message. However, this may not always be appropriate.
            Use CustomMessage to tailor a response to the necessity of the moment.

        .PARAMETER EnableException
            By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
            This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
            Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

        .EXAMPLE
            PS C:\> Test-DbaDeprecation -DeprecatedOn "1.0.0.0" -Parameter 'Details'

            Will - once per session - complain if the parameter 'Details' is used.
            Will cause tests to fail, if it's still in the code after release 1.0.0.0.

        .EXAMPLE
            PS C:\> Test-DbaDeprecation -DeprecatedOn "1.0.0.0" -Alias Copy-SqlDatabase

            Will - once per session - complain if the alias 'Copy-SqlDatabase' is used.
            Will cause tests to fail, if it's still in the code after release 1.0.0.0.
       #>
    [CmdletBinding()]
    param (
        [Parameter(Mandatory)]
        [Version]
        $DeprecatedOn,

        [string]
        $FunctionName = (Get-PSCallStack)[0].Command,

        [object]
        $Call = (Get-PSCallStack)[0].InvocationInfo,

        [Parameter(ParameterSetName = "Param", Mandatory)]
        [string]
        $Parameter,

        [Parameter(ParameterSetName = "Alias", Mandatory)]
        [string]
        $Alias,

        [string]
        $CustomMessage,

        [bool]
        [Alias('Silent')]
        $EnableException = $EnableException
    )

    switch ($PSCmdlet.ParameterSetName) {
        "Param" {
            $ast = [System.Management.Automation.Language.Parser]::ParseInput($Call.Line, [ref]$null, [ref]$null)
            $objects = $ast.FindAll( { $args[0] -is [System.Management.Automation.Language.CommandAst] }, $true)
            $sub = $objects | Where-Object Parent -Like "$($Call.InvocationName)*" | Select-Object -First 1

            if ($sub.CommandElements | Where-Object ParameterName -eq $Parameter) {
                if ($CustomMessage) { $Message = $CustomMessage }
                else { $Message = "Using the parameter $Parameter is deprecated. This parameter will be removed in version $DeprecatedOn or before, check in the documentation what parameter to use instead" }

                Write-Message -Message $Message -Level Warning -FunctionName $FunctionName -Once "Deprecated.Alias.$Alias"
            }
        }

        "Alias" {
            if ($Alias -eq $Call.InvocationName) {
                if ($CustomMessage) { $Message = $CustomMessage }
                else { $Message = "Using the alias $Alias is deprecated. This alias will be removed in version $DeprecatedOn or before, use $FunctionName instead. Invoke-DbatoolsRenameHelper can also help rename commands within your scripts." }

                Write-Message -Message $Message -Level Warning -FunctionName $FunctionName -Once "Deprecated.Alias.$Alias"
            }
        }
    }
}

tools\dbatools\internal\functions\Initialize-CredSSP.ps1

function Initialize-CredSSP {
    <#
    .SYNOPSIS
        Configure local and remote computers to use Credssp protocol

    .DESCRIPTION
        Enables both local and remote machine to participate in a Credssp session.
        Local computer will be told to trust the Delegate (remote) computer.
        Remote computer will be configured to act as a server and accept client connections from local computer.

    .PARAMETER ComputerName
        Remote computer name

    .PARAMETER Credential
        PSCredential object used for authentication

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .EXAMPLE
        PS C:\> Initialize-CredSSP MyRemoteComputer
        # Configure CredSSP protocol to connect to remote computer MyRemoteComputer
    .EXAMPLE
        PS C:\> $cred = Get-Credential
        PS C:\> Initialize-CredSSP -ComputerName PC2 -Credential $cred
        # Configure CredSSP protocol to connect to remote computer with custom credentials
#>

    Param (
        [Parameter(Mandatory, Position = 1)]
        [string]$ComputerName,
        [pscredential]$Credential,
        [bool]$EnableException
    )

    #Configure local machine
    #Start local WinRM service
    if ((Get-Service WinRM).Status -ne 'Running') {
        $null = Get-Service WinRM -ErrorAction Stop | Start-Service -ErrorAction Stop
        Start-Sleep -Seconds 1
    }
    #Get current config
    try {
        $sspList = Get-WSManCredSSP -ErrorAction Stop

    } catch {
        Stop-Function -Message "Failed to get a list of CredSSP hosts" -ErrorRecord $_
        return
    }
    #Enable delegation to a remote server if not declared already
    if ($sspList -and $sspList[0] -notmatch "wsman\/$([regex]::Escape($ComputerName))[\,$]") {
        Write-Message -Level Verbose -Message "Configuring local host to use CredSSP"
        try {
            # Enable client SSP on local machine
            $null = Enable-WSManCredSSP -role Client -DelegateComputer $ComputerName -Force -ErrorAction Stop
        } catch {
            Stop-Function -Message "Failed to configure local CredSSP as a client" -ErrorRecord $_
        }
    }

    # Configure remote machine
    Write-Message -Level Verbose -Message "Configuring remote host to use CredSSP"
    try {
        Invoke-Command2 -ComputerName $ComputerName -Credential $Credential -Raw -ScriptBlock {
            $sspList = Get-WSManCredSSP -ErrorAction Stop
            if ($sspList[1] -ne 'This computer is configured to receive credentials from a remote client computer.') {
                $null = Enable-WSManCredSSP -Role Server -Force -ErrorAction Stop
            }
            # netsh http add iplisten 127.0.0.1 - whaattt?
        }
    } catch {
        Stop-Function -Message "Failed to configure remote CredSSP on $ComputerName as a server" -ErrorRecord $_
    }
}

tools\dbatools\internal\functions\Invoke-Alter.ps1

function Invoke-Alter {
    <#
        For stubborn .net objects that won't throw properly
       #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [object]$Object
    )
    process {
        if ($Pscmdlet.ShouldProcess($Name, "Performing create")) {
            $ErrorActionPreference = 'Stop'
            $EnableException = $true
            $Object.Alter()
        }
    }
}

tools\dbatools\internal\functions\Invoke-Command2.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Invoke-Command2 {
    <#
        .SYNOPSIS
            Wrapper function that calls Invoke-Command and gracefully handles credentials.

        .DESCRIPTION
            Wrapper function that calls Invoke-Command and gracefully handles credentials.

        .PARAMETER ComputerName
            Default: $env:COMPUTERNAME
            The computer to invoke the scriptblock on.

        .PARAMETER Credential
            The credentials to use.
            Can accept $null on older PowerShell versions, since it expects type object, not PSCredential

        .PARAMETER ScriptBlock
            The code to run on the targeted system

        .PARAMETER InputObject
            Object that could be used in the ScriptBlock as $Input.
            NOTE:
            The object will be de-serialized once passed through the remote pipeline.
            Some objects (like hashtables) do not support de-serialization.

        .PARAMETER Authentication
            Choose an authentication to use for the connection

        .PARAMETER ConfigurationName
            Name of the remote PSSessionConfiguration to use.
            Should be registered already using Register-PSSessionConfiguration or internal Register-RemoteSessionConfiguration.

        .PARAMETER ArgumentList
            Any arguments to pass to the scriptblock being run

        .PARAMETER Raw
            Passes through the raw return data, rather than prettifying stuff.

        .EXAMPLE
            PS C:\> Invoke-Command2 -ComputerName sql2014 -Credential $Credential -ScriptBlock { dir }

            Executes the scriptblock '{ dir }' on the computer sql2014 using the credentials stored in $Credential.
            If $Credential is null, no harm done.
    #>
    [CmdletBinding()]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUsePSCredentialType", "")]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSAvoidUsingPlainTextForPassword", "")]
    param (
        [DbaInstanceParameter]$ComputerName = $env:COMPUTERNAME,
        [object]$Credential,
        [scriptblock]$ScriptBlock,
        [object[]]$ArgumentList,
        [parameter(ValueFromPipeline)]
        [object[]]$InputObject,
        [ValidateSet('Default', 'Basic', 'Negotiate', 'NegotiateWithImplicitCredential', 'Credssp', 'Digest', 'Kerberos')]
        [string]$Authentication = 'Default',
        [string]$ConfigurationName,
        [switch]$Raw
    )
    <# Note: Credential stays as an object type for legacy reasons. #>

    $InvokeCommandSplat = @{
        ScriptBlock = $ScriptBlock
    }
    if ($ArgumentList) {
        $InvokeCommandSplat["ArgumentList"] = $ArgumentList
    }
    if ($InputObject) {
        $InvokeCommandSplat["InputObject"] = $InputObject
    }
    if (-not $ComputerName.IsLocalHost) {
        $runspaceId = [System.Management.Automation.Runspaces.Runspace]::DefaultRunspace.InstanceId
        # sessions with different Authentication should have different session names
        if ($ConfigurationName) {
            $sessionName = "dbatools_$($Authentication)_$($ConfigurationName)_$runspaceId"
        } else {
            $sessionName = "dbatools_$($Authentication)_$runspaceId"
        }

        # Retrieve a session from the session cache, if available (it's unique per runspace)
        $currentSession = [Sqlcollaborative.Dbatools.Connection.ConnectionHost]::PSSessionGet($runspaceId, $ComputerName.ComputerName) | Where-Object { $_.State -Match "Opened|Disconnected" -and $_.Name -eq $sessionName }
        if (-not $currentSession) {
            Write-Message -Level Debug "Creating new $Authentication session [$sessionName] for $($ComputerName.ComputerName)"
            $psSessionSplat = @{
                ComputerName   = $ComputerName.ComputerName
                Authentication = $Authentication
                Name           = $sessionName
                ErrorAction    = 'Stop'
            }
            if (Test-Windows -NoWarn) {
                $timeout = New-PSSessionOption -IdleTimeout (New-TimeSpan -Minutes 10).TotalMilliSeconds
                $psSessionSplat += @{ SessionOption = $timeout }
            }
            if ($Credential) {
                $psSessionSplat += @{ Credential = $Credential }
            }
            if ($ConfigurationName) {
                $psSessionSplat += @{ ConfigurationName = $ConfigurationName }
            }
            $currentSession = New-PSSession @psSessionSplat
            $InvokeCommandSplat["Session"] = $currentSession
        } else {
            Write-Message -Level Debug "Found an existing session $sessionName, reusing it"
            if ($currentSession.State -eq "Disconnected") {
                $null = $currentSession | Connect-PSSession -ErrorAction Stop
            }
            $InvokeCommandSplat["Session"] = $currentSession

            # Refresh the session registration if registered, to reset countdown until purge
            [Sqlcollaborative.Dbatools.Connection.ConnectionHost]::PSSessionSet($runspaceId, $ComputerName.ComputerName, $currentSession)
        }
    }

    if ($Raw) {
        Invoke-Command @InvokeCommandSplat
    } else {
        Invoke-Command @InvokeCommandSplat | Select-Object -Property * -ExcludeProperty PSComputerName, RunspaceId, PSShowComputerName
    }

    if (-not $ComputerName.IsLocalhost) {
        # Tell the system to clean up if the session expires
        [Sqlcollaborative.Dbatools.Connection.ConnectionHost]::PSSessionSet($runspaceId, $ComputerName.ComputerName, $currentSession)

        if (-not (Get-DbatoolsConfigValue -FullName 'PSRemoting.Sessions.Enable' -Fallback $true)) {
            $currentSession | Remove-PSSession
        }
    }
}

tools\dbatools\internal\functions\flowcontrol\Test-ElevationRequirement.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#

function Test-ElevationRequirement {
    <#
        .SYNOPSIS
            Command that tests, whether the process runs elevated and has to run as such.

        .DESCRIPTION
            Command that tests, whether the process runs elevated and has to run as such.
            Some commands require to be run elevated, when executed against localhost, but not when run against a remote computer.
            This command handles that test and manages the reaction to it.

        .PARAMETER ComputerName
            The computer that is being targeted by the calling command.
            This must be a localhost variety, for it to be able to fail.

        .PARAMETER Continue
            When using the native capability to terminate on fail, this will call continue in non-EnableException mode.

        .PARAMETER ContinueLabel
            When using the native capability to terminate on fail, and using a continue mode, the continue will continue with this label.

        .PARAMETER SilentlyContinue
            When using the native capability to terminate on fail, this will call continue in EnableException mode.

        .PARAMETER NoStop
            Does not call stop-function when the test fails, rather only returns $false instead

        .PARAMETER EnableException
            By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
            This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
            Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

        .EXAMPLE
            $null = Test-ElevationRequirement -ComputerName $instance -Continue

            This will test whether the currently processed instance is localhost and the process is running elevated.
            If it should have elevation but is not running with elevation:
            - In silent mode it will termiante with an exception
            - In default mode, it will continue with the next instance

        .EXAMPLE
            if (-not ( Test-ElevationRequirement -ComputerName $instance -NoStop)) {
                # Do whatever
            }

        This will test whether the currently processed instance is localhost and the process is running elevated.
        If it isn't running elevated but should be, the overall condition will be met and the if-block is executed.
    #>
    [CmdletBinding(DefaultParameterSetName = 'Stop')]
    param (
        [DbaInstanceParameter]
        $ComputerName,

        [Parameter(ParameterSetName = 'Stop')]
        [switch]
        $Continue,

        [Parameter(ParameterSetName = 'Stop')]
        [string]
        $ContinueLabel,

        [Parameter(ParameterSetName = 'Stop')]
        [switch]
        $SilentlyContinue,

        [Parameter(ParameterSetName = 'NoStop')]
        [switch]
        $NoStop,

        [bool]
        [Alias('Silent')]
        $EnableException = $EnableException
    )

    $isElevated = ([Security.Principal.WindowsPrincipal][Security.Principal.WindowsIdentity]::GetCurrent()).IsInRole([Security.Principal.WindowsBuiltInRole]::Administrator)
    $testResult = $true
    if ($ComputerName.IsLocalHost -and (-not $isElevated)) { $testResult = $false }

    if ($PSCmdlet.ParameterSetName -like "NoStop") {
        return $testResult
    } elseif ($PSCmdlet.ParameterSetName -like "Stop") {
        if ($testResult) { return $testResult }

        $splatStopFunction = @{
            Message = "Console not elevated, but elevation is required to perform some actions on localhost for this command."
        }

        if (Test-Bound "Continue") { $splatStopFunction["Continue"] = $Continue }
        if (Test-Bound "ContinueLabel") { $splatStopFunction["ContinueLabel"] = $ContinueLabel }
        if (Test-Bound "SilentlyContinue") { $splatStopFunction["SilentlyContinue"] = $SilentlyContinue }

        . Stop-Function @splatStopFunction -FunctionName (Get-PSCallStack)[1].Command
        return $testResult
    }
}

tools\dbatools\internal\functions\Invoke-DbaAsync.ps1

function Invoke-DbaAsync {
    <#
        .SYNOPSIS
            Runs a T-SQL script.

        .DESCRIPTION
            Runs a T-SQL script. It's a stripped down version of https://github.com/sqlcollaborative/Invoke-SqlCmd2 and adapted to use dbatools' facilities.
            If you're looking for a public usable function, see Invoke-DbaQuery

        .PARAMETER SQLConnection
            Specifies an existing SQLConnection object to use in connecting to SQL Server.

        .PARAMETER Query
            Specifies one or more queries to be run. The queries can be Transact-SQL, XQuery statements, or sqlcmd commands. Multiple queries in a single batch may be separated by a semicolon.

            Do not specify the sqlcmd GO separator (or, use the ParseGo parameter). Escape any double quotation marks included in the string.

            Consider using bracketed identifiers such as [MyTable] instead of quoted identifiers such as "MyTable".

        .PARAMETER QueryTimeout
            Specifies the number of seconds before the queries time out.

        .PARAMETER As
            Specifies output type. Valid options for this parameter are 'DataSet', 'DataTable', 'DataRow', 'PSObject', and 'SingleValue'

            PSObject output introduces overhead but adds flexibility for working with results: http://powershell.org/wp/forums/topic/dealing-with-dbnull/

        .PARAMETER SqlParameters
            Specifies a hashtable of parameters for parameterized SQL queries.  http://blog.codinghorror.com/give-me-parameterized-sql-or-give-me-death/

            Example:

        .PARAMETER AppendServerInstance
            If this switch is enabled, the SQL Server instance will be appended to PSObject and DataRow output.


        .PARAMETER MessagesToOutput
            Use this switch to have on the output stream messages too (e.g. PRINT statements). Output will hold the resultset too. See examples for detail

        .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
       #>

    param (
        [Alias('Connection', 'Conn')]
        [ValidateNotNullOrEmpty()]
        [Microsoft.SqlServer.Management.Common.ServerConnection]$SQLConnection,

        [Parameter(Mandatory, Position = 0, ParameterSetName = "Query")]
        [string]
        $Query,

        [ValidateSet("DataSet", "DataTable", "DataRow", "PSObject", "SingleValue")]
        [string]
        $As = "DataRow",

        [System.Collections.IDictionary]
        $SqlParameters,

        [switch]
        $AppendServerInstance,

        [Int32]$QueryTimeout = 600,

        [switch]
        $MessagesToOutput,

        [switch]
        $EnableException
    )

    begin {
        function Resolve-SqlError {
            param($Err)
            if ($Err) {
                if ($Err.Exception.GetType().Name -eq 'SqlException') {
                    # For SQL exception
                    #$Err = $_
                    Write-Message -Level Debug -Message "Capture SQL Error"
                    if ($PSBoundParameters.Verbose) {
                        Write-Message -Level Verbose -Message "SQL Error:  $Err"
                    } #Shiyang, add the verbose output of exception
                    switch ($ErrorActionPreference.ToString()) {
                        { 'SilentlyContinue', 'Ignore' -contains $_ } {   }
                        'Stop' { throw $Err }
                        'Continue' { throw $Err }
                        Default { Throw $Err }
                    }
                } else {
                    # For other exception
                    Write-Message -Level Debug -Message "Capture Other Error"
                    if ($PSBoundParameters.Verbose) {
                        Write-Message -Level Verbose -Message "Other Error:  $Err"
                    }
                    switch ($ErrorActionPreference.ToString()) {
                        { 'SilentlyContinue', 'Ignore' -contains $_ } { }
                        'Stop' { throw $Err }
                        'Continue' { throw $Err }
                        Default { throw $Err }
                    }
                }
            }

        }

        if ($As -eq "PSObject") {
            #This code scrubs DBNulls.  Props to Dave Wyatt
            $cSharp = @'
                using System;
                using System.Data;
                using System.Management.Automation;

                public class DBNullScrubber
                {
                    public static PSObject DataRowToPSObject(DataRow row)
                    {
                        PSObject psObject = new PSObject();

                        if (row != null && (row.RowState & DataRowState.Detached) != DataRowState.Detached)
                        {
                            foreach (DataColumn column in row.Table.Columns)
                            {
                                Object value = null;
                                if (!row.IsNull(column))
                                {
                                    value = row[column];
                                }

                                psObject.Properties.Add(new PSNoteProperty(column.ColumnName, value));
                            }
                        }

                        return psObject;
                    }
                }
'@

            try {
                Add-Type -TypeDefinition $cSharp -ReferencedAssemblies 'System.Data', 'System.Xml' -ErrorAction stop
            } catch {
                if (-not $_.ToString() -like "*The type name 'DBNullScrubber' already exists*") {
                    Write-Warning "Could not load DBNullScrubber.  Defaulting to DataRow output: $_."
                    $As = "Datarow"
                }
            }
        }

        $GoSplitterRegex = [regex]'(?smi)^[\s]*GO[\s]*$'

    }
    process {
        $Conn = $SQLConnection.SqlConnectionObject


        Write-Message -Level Debug -Message "Stripping GOs from source"
        $Pieces = $GoSplitterRegex.Split($Query)

        # Only execute non-empty statements
        $Pieces = $Pieces | Where-Object { $_.Trim().Length -gt 0 }
        foreach ($piece in $Pieces) {
            $cmd = New-Object system.Data.SqlClient.SqlCommand($piece, $conn)
            $cmd.CommandTimeout = $QueryTimeout

            if ($null -ne $SqlParameters) {
                $SqlParameters.GetEnumerator() |
                    ForEach-Object {
                    if ($null -ne $_.Value) {
                        $cmd.Parameters.AddWithValue($_.Key, $_.Value)
                    } else {
                        $cmd.Parameters.AddWithValue($_.Key, [DBNull]::Value)
                    }
                } > $null
            }

            $ds = New-Object system.Data.DataSet
            $da = New-Object system.Data.SqlClient.SqlDataAdapter($cmd)

            if ($MessagesToOutput) {
                $defaultrunspace = [System.Management.Automation.Runspaces.Runspace]::DefaultRunspace
                $pool = [RunspaceFactory]::CreateRunspacePool(1, [int]$env:NUMBER_OF_PROCESSORS + 1)
                $pool.ApartmentState = "MTA"
                $pool.Open()
                $runspaces = @()
                $scriptblock = {
                    param ($da, $ds, $conn, $queue )
                    $conn.FireInfoMessageEventOnUserErrors = $false
                    $handler = [System.Data.SqlClient.SqlInfoMessageEventHandler] { $queue.Enqueue($_) }
                    $conn.add_InfoMessage($handler)
                    $Err = $null
                    try {
                        [void]$da.fill($ds)
                    } catch {
                        $Err = $_
                    } finally {
                        $conn.remove_InfoMessage($handler)
                    }
                    return $Err
                }
                $queue = New-Object System.Collections.Concurrent.ConcurrentQueue[string]
                $runspace = [PowerShell]::Create()
                $null = $runspace.AddScript($scriptblock)
                $null = $runspace.AddArgument($da)
                $null = $runspace.AddArgument($ds)
                $null = $runspace.AddArgument($Conn)
                $null = $runspace.AddArgument($queue)
                $runspace.RunspacePool = $pool
                $runspaces += [PSCustomObject]@{ Pipe = $runspace; Status = $runspace.BeginInvoke() }
                # While streaming ...
                while ($runspaces.Status.IsCompleted -notcontains $true) {
                    $item = $null
                    if ($queue.TryDequeue([ref]$item)) {
                        "$item"
                    }
                }
                # Drain the stream as the runspace is closed, just to be safe
                if ($queue.IsEmpty -ne $true) {
                    $item = $null
                    while ($queue.TryDequeue([ref]$item)) {
                        "$item"
                    }
                }
                foreach ($runspace in $runspaces) {
                    $results = $runspace.Pipe.EndInvoke($runspace.Status)
                    $runspace.Pipe.Dispose()
                    if ($null -ne $results) {
                        Resolve-SqlError $results[0]
                    }
                }
                $pool.Close()
                $pool.Dispose()
                [System.Management.Automation.Runspaces.Runspace]::DefaultRunspace = $defaultrunspace
            } else {
                #Following EventHandler is used for PRINT and RAISERROR T-SQL statements. Executed when -Verbose parameter specified by caller and no -MessageToOutput
                if ($PSBoundParameters.Verbose) {
                    $conn.FireInfoMessageEventOnUserErrors = $false
                    $handler = [System.Data.SqlClient.SqlInfoMessageEventHandler] { Write-Verbose -Message "$($_)" }
                    $conn.add_InfoMessage($handler)
                }
                try {
                    [void]$da.fill($ds)
                } catch {
                    $Err = $_
                } finally {
                    if ($PSBoundParameters.Verbose) {
                        $conn.remove_InfoMessage($handler)
                    }
                }
                Resolve-SqlError $Err
            }
            if ($AppendServerInstance) {
                #Basics from Chad Miller
                $Column = New-Object Data.DataColumn
                $Column.ColumnName = "ServerInstance"

                if ($ds.Tables.Count -ne 0) {
                    $ds.Tables[0].Columns.Add($Column)
                    Foreach ($row in $ds.Tables[0]) {
                        $row.ServerInstance = $SQLConnection.ServerInstance
                    }
                }
            }

            switch ($As) {
                'DataSet' {
                    $ds
                }
                'DataTable' {
                    $ds.Tables
                }
                'DataRow' {
                    if ($ds.Tables.Count -ne 0) {
                        $ds.Tables[0]
                    }
                }
                'PSObject' {
                    if ($ds.Tables.Count -ne 0) {
                        #Scrub DBNulls - Provides convenient results you can use comparisons with
                        #Introduces overhead (e.g. ~2000 rows w/ ~80 columns went from .15 Seconds to .65 Seconds - depending on your data could be much more!)
                        foreach ($row in $ds.Tables[0].Rows) {
                            [DBNullScrubber]::DataRowToPSObject($row)
                        }
                    }
                }
                'SingleValue' {
                    if ($ds.Tables.Count -ne 0) {
                        $ds.Tables[0] | Select-Object -ExpandProperty $ds.Tables[0].Columns[0].ColumnName
                    }
                }
            }
        } #foreach ($piece in $Pieces)

    }
}

tools\dbatools\internal\functions\Invoke-DbaDatabaseCorruption.ps1

function Invoke-DbaDbCorruption {
    <#
      .SYNOPSIS
      Utilizes the DBCC WRITEPAGE functionality  to corrupt a specific database table for testing.  In no uncertain terms, this is a non-production command.
      This will absolutely break your databases and that is its only purpose.
      Using DBCC WritePage will definitely void any support options for your database.

      .DESCRIPTION
      This command can be used to verify your tests for corruption are successful, and to demo various scenarios for corrupting page data.
      This command will take an instance and database (and optionally a table) and set the database to single user mode, corrupt either the specified table or the first table it finds, and returns it to multi-user.

      .PARAMETER SqlInstance
      The SQL Server instance holding the databases to be removed.You must have sysadmin access and Server version must be SQL Server version 2000 or higher.

      .PARAMETER SqlCredential
      Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

      .PARAMETER Database
      The single database you would like to corrupt, this command does not support multiple databases (on purpose.)

      .PARAMETER Table
      The specific table you want corrupted, if you do not choose one, the first user table (alphabetically) will be chosen for corruption.

      .PARAMETER WhatIf
      If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.

      .PARAMETER Confirm
      If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.

      .PARAMETER EnableException
      By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
      This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
      Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

      .NOTES
      Tags: Corruption, Testing
      Author: Constantine Kokkinos (@mobileck https://constantinekokkinos.com)
      Reference: https://www.sqlskills.com/blogs/paul/dbcc-writepage/
      Website: https://dbatools.io
      Copyright: (c) 2018 by dbatools, licensed under MIT
      License: MIT https://opensource.org/licenses/MIT

      .LINK
      https://dbatools.io/Invoke-DbaDbCorruption

      .EXAMPLE
      Invoke-DbaDbCorruption -SqlInstance sql2016 -Database containeddb
      Prompts for confirmation then selects the first table in database containeddb and corrupts it (by putting database into single user mode, writing to garbage to its first non-iam page, and returning it to multi-user.)

      .EXAMPLE
      Invoke-DbaDbCorruption -SqlInstance sql2016 -Database containeddb -Table Customers -Confirm:$false
      Does not prompt and immediately corrupts table customers in database containeddb on the sql2016 instance (by putting database into single user mode, writing to garbage to its first non-iam page, and returning it to multi-user.)
    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = 'High')]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter]$SqlInstance,
        [Alias("Credential")]
        [PSCredential]
        $SqlCredential,
        [parameter(Mandatory)]
        [string]$Database,
        [string]$Table,
        [Alias('Silent')]
        [switch]$EnableException
    )
    # For later if we want to do bit flipping.
    # function Dbcc-ReadPage {
    #   param (
    #     $SqlInstance,
    #     $Database,
    #     $TableName,
    #     $IndexID = 1
    #   )
    #   $DbccPage = "DBCC PAGE (N'$Database',N'$($TableName)',$IndexID)"
    #   Write-Message -Level Verbose -Message "$DbccPage"
    #   $pages = $SqlInstance.Query($DbccPage) | Where-Object { $_.IAMFID -ne [DBNull]::Value }
    #   return $Pages
    # }

    function Dbcc-Index {
        [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseApprovedVerbs", "")]
        [CmdletBinding()]
        param (
            $SqlInstance,
            $Database,
            $TableName,
            $IndexID = 1
        )
        $DbccInd = "DBCC IND (N'$Database',N'$($TableName)',$IndexID)"
        Write-Message -Level Verbose -Message "$DbccInd"
        $pages = $SqlInstance.Query($DbccInd) | Where-Object { $_.IAMFID -ne [DBNull]::Value }
        return $Pages
    }
    function Dbcc-WritePage {
        [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseApprovedVerbs", "")]
        [CmdletBinding()]
        param (
            $SqlInstance,
            $Database,
            $FileId = 1,
            $PageId,
            $Offset = 4000,
            $NumberOfBytesToChange = 1,
            $HexString = '0x45',
            $bypassbufferpool = 1
        )
        $DbccWritePage = "DBCC WRITEPAGE (N'$Database', $FileId, $PageId, $Offset, $NumberOfBytesToChange, $HexString, $bypassbufferpool);"
        Write-Message -Level Verbose -Message "$DbccWritePage"
        $WriteInfo = $SqlInstance.Databases[$Database].Query($DbccWritePage)
        return $WriteInfo
    }

    if ("master", "tempdb", "model", "msdb" -contains $Database) {
        Stop-Function -Message "You may not corrupt system databases."
        return
    }

    try {
        $Server = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential -MinimumVersion 9
    } catch {
        Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $SqlInstance
        return
    }

    $db = $Server.Databases | Where-Object { $_.Name -eq $Database }
    if (!$db) {
        Stop-Function -Message "The database specified does not exist."
        return
    }
    if ($Table) {
        $tb = $db.Tables | Where-Object Name -eq $Table
    } else {
        $tb = $db.Tables | Select-Object -First 1
    }

    if (-not $tb) {
        Stop-Function -Message "There are no accessible tables in $Database on $SqlInstance." -Target $Database
        return
    }

    $RowCount = $db.Query("select top 1 * from $($tb.name)")
    if ($RowCount.count -eq 0) {
        Stop-Function -Message "The table $tb has no rows" -Target $table
        return
    }

    if ($Pscmdlet.ShouldProcess("$db on $SqlInstance", "Corrupt $tb in $Database")) {
        $pages = Dbcc-Index -SqlInstance $Server -Database $Database -TableName $tb.Name | Select-Object -First 1
        #Dbcc-ReadPage -SqlInstance $Server -Database $Database -PageId $pages.PagePID -FileId $pages.PageFID
        Write-Message -Level Verbose -Message "Setting single-user mode."
        $null = Stop-DbaProcess -SqlInstance $Server -Database $Database
        $null = Set-DbaDbState -SqlServer $Server -Database $Database -SingleUser -Force

        try {
            Write-Message -Level Verbose -Message "Stopping processes in target database."
            $null = Stop-DbaProcess -SqlInstance $Server -Database $Database
            Write-Message -Level Verbose -Message "Corrupting data."
            Dbcc-WritePage -SqlInstance $Server -Database $Database -PageId $pages.PagePID -FileId $pages.PageFID
        } catch {
            $Server.ConnectionContext.Disconnect()
            $Server.ConnectionContext.Connect()
            $null = Set-DbaDbState -SqlServer $Server -Database $Database -MultiUser -Force
            Stop-Function -Message "Failed to write page" -Category WriteError -ErrorRecord $_ -Target $instance
            return
        }

        Write-Message -Level Verbose -Message "Setting database into multi-user mode."
        # If you do not disconnect and reconnect, multiuser fails.
        $Server.ConnectionContext.Disconnect()
        $Server.ConnectionContext.Connect()
        $null = Set-DbaDbState -SqlServer $Server -Database $Database -MultiUser -Force

        [pscustomobject]@{
            ComputerName = $Server.ComputerName
            InstanceName = $Server.ServiceName
            SqlInstance  = $Server.DomainInstanceName
            Database     = $db.Name
            Table        = $tb.Name
            Status       = "Corrupted"
        }
    }
}

tools\dbatools\internal\functions\Invoke-DbaDiagnosticQueryScriptParser.ps1

function Invoke-DbaDiagnosticQueryScriptParser {
    [CmdletBinding(DefaultParameterSetName = "Default")]

    Param(
        [parameter(Mandatory)]
        [ValidateScript( {Test-Path $_})]
        [System.IO.FileInfo]$filename,
        [Switch]$ExcludeQueryTextColumn,
        [Switch]$ExcludePlanColumn,
        [Switch]$NoColumnParsing
    )

    $out = "Parsing file {0}" -f $filename
    write-verbose -Message $out

    $ParsedScript = @()
    [string]$scriptpart = ""

    $fullscript = Get-Content -Path $filename

    $start = $false
    $querynr = 0
    $DBSpecific = $false

    if ($ExcludeQueryTextColumn) {$QueryTextColumn = ""}  else {$QueryTextColumn = ", t.[text] AS [Complete Query Text]"}
    if ($ExcludePlanColumn) {$PlanTextColumn = ""} else {$PlanTextColumn = ", qp.query_plan AS [Query Plan]"}

    foreach ($line in $fullscript) {
        if ($start -eq $false) {
            if (($line -match "You have the correct major version of SQL Server for this diagnostic information script") -or ($line.StartsWith("-- Server level queries ***"))) {
                $start = $true
            }
            continue
        }

        if ($line.StartsWith("-- Database specific queries ***") -or ($line.StartsWith("-- Switch to user database **"))) {
            $DBSpecific = $true
        }

        if (!$NoColumnParsing) {
            if (($line -match "-- uncomment out these columns if not copying results to Excel") -or ($line -match "-- comment out this column if copying results to Excel")) {
                $line = $QueryTextColumn + $PlanTextColumn
            }
        }

        if ($line -match "-{2,}\s{1,}(.*) \(Query (\d*)\) \((\D*)\)") {
            $prev_querydescription = $Matches[1]
            $prev_querynr = $Matches[2]
            $prev_queryname = $Matches[3]

            if ($querynr -gt 0) {
                $properties = @{QueryNr = $querynr; QueryName = $queryname; DBSpecific = $DBSpecific; Description = $queryDescription; Text = $scriptpart}
                $newscript = New-Object -TypeName PSObject -Property $properties
                $ParsedScript += $newscript
                $scriptpart = ""
            }

            $querydescription = $prev_querydescription
            $querynr = $prev_querynr
            $queryname = $prev_queryname
        } else {
            if (!$line.startswith("--") -and ($line.trim() -ne "") -and ($null -ne $line) -and ($line -ne "\n")) {
                $scriptpart += $line + "`n"
            }
        }
    }

    $properties = @{QueryNr = $querynr; QueryName = $queryname; DBSpecific = $DBSpecific; Description = $queryDescription; Text = $scriptpart}
    $newscript = New-Object -TypeName PSObject -Property $properties
    $ParsedScript += $newscript
    $ParsedScript
}

tools\dbatools\internal\functions\Invoke-DbMirrorValidation.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#
function Invoke-DbMirrorValidation {
    <#
        .SYNOPSIS
            Validates if a mirror is ready

        .DESCRIPTION
            Validates if a mirror is ready

            Thanks to https://github.com/mmessano/PowerShell/blob/master/SQL-ConfigureDatabaseMirroring.ps1

        .PARAMETER Primary
            SQL Server name or SMO object representing the primary SQL Server.

        .PARAMETER PrimarySqlCredential
            Login to the primary instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

        .PARAMETER Mirror
            SQL Server name or SMO object representing the mirror SQL Server.

        .PARAMETER MirrorSqlCredential
            Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

        .PARAMETER Witness
            SQL Server name or SMO object representing the witness SQL Server.

        .PARAMETER WitnessSqlCredential
            Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

        .PARAMETER Database
                The database or databases to mirror

        .PARAMETER SharedPath
                The network share where the backups will be

        .PARAMETER InputObject
                Enables piping from Get-DbaDatabase

        .PARAMETER EnableException
            By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
            This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
            Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

        .NOTES
            Tags: Mirror, HA
            Author: Chrissy LeMaire (@cl), netnerds.net
            dbatools PowerShell module (https://dbatools.io, [email protected])
           Copyright: (c) 2018 by dbatools, licensed under MIT
            License: MIT https://opensource.org/licenses/MIT
        .EXAMPLE
            PS C:\> $params = @{
                    Primary = 'sql2017a'
                    Mirror = 'sql2017b'
                    MirrorSqlCredential = 'sqladmin'
                    Witness = 'sql2019'
                    Database = 'onthewall'
                    SharedPath = '\\nas\sql\share'
                }

            PS C:\> Invoke-DbMirrorValidation @params

            Do things

       #>
    [CmdletBinding()]
    param (
        [DbaInstanceParameter]$Primary,
        [PSCredential]$PrimarySqlCredential,
        [parameter(Mandatory)]
        [DbaInstanceParameter[]]$Mirror,
        [PSCredential]$MirrorSqlCredential,
        [DbaInstanceParameter]$Witness,
        [PSCredential]$WitnessSqlCredential,
        [string[]]$Database,
        [string]$SharedPath,
        [parameter(ValueFromPipeline)]
        [Microsoft.SqlServer.Management.Smo.Database[]]$InputObject,
        [switch]$EnableException
    )
    process {
        if ((Test-Bound -ParameterName Primary) -and (Test-Bound -Not -ParameterName Database)) {
            Stop-Function -Message "Database is required when SqlInstance is specified"
            return
        }

        if ($Primary) {
            $InputObject += Get-DbaDatabase -SqlInstance $Primary -SqlCredential $SqlCredential -Database $Database
        }

        foreach ($db in $InputObject) {
            $server = $db.Parent
            $dbname = $db.Name
            $canmirror = $true
            $dest = Connect-DbaInstance -SqlInstance $Mirror -Credential $MirrorSqlCredential

            $endpoints = @()
            $endpoints += Get-DbaEndpoint -SqlInstance $server | Where-Object EndpointType -eq DatabaseMirroring
            $endpoints += Get-DbaEndpoint -SqlInstance $dest | Where-Object EndpointType -eq DatabaseMirroring

            if (Test-Bound -ParameterName Witness) {
                try {
                    $witserver = Connect-DbaInstance -SqlInstance $Witness -SqlCredential $WitnessSqlCredential
                    $endpoints += Get-DbaEndpoint -SqlInstance $witserver | Where-Object EndpointType -eq DatabaseMirroring
                    $witdb = Get-DbaDatabase -SqlInstance $witserver -Database $db.Name
                    $wexists = $true

                    if ($witdb.Status -ne 'Restoring') {
                        $canmirror = $false
                    }

                    if ($witdb) {
                        $witexists = $true
                    } else {
                        Write-Message -Level Verbose -Message "Database ($dbname) exists on witness server"
                        $canmirror = $false
                        $witexists = $false
                    }
                } catch {
                    $wexists = $false
                    $canmirror = $false
                }
            }

            if ($db.MirroringStatus -ne [Microsoft.SqlServer.Management.Smo.MirroringStatus]::None) {
                Write-Message -Level Verbose -Message "Cannot setup mirroring on database ($dbname) due to its current mirroring state: $($db.MirroringStatus)"
                $canmirror = $false
            }

            if ($db.Status -ne [Microsoft.SqlServer.Management.Smo.DatabaseStatus]::Normal) {
                Write-Message -Level Verbose -Message "Cannot setup mirroring on database ($dbname) due to its current Status: $($db.Status)"
                $canmirror = $false
            }

            if ($db.RecoveryModel -ne 'Full') {
                Write-Message -Level Verbose -Message "Cannot setup mirroring on database ($dbname) due to its current recovery model: $($db.RecoveryModel)"
                $canmirror = $false
            }

            $destdb = Get-DbaDatabase -SqlInstance $dest -Database $db.Name

            if ($destdb.RecoveryModel -ne 'Full') {
                $canmirror = $false
            }

            if ($destdb.Status -ne 'Restoring') {
                $canmirror = $false
            }

            if ($destdb) {
                $destdbexists = $true
            } else {
                Write-Message -Level Verbose -Message "Database ($dbname) does not exist on mirror server"
                $canmirror = $false
                $destdbexists = $false
            }

            if ((Test-Bound -ParameterName SharedPath) -and -not (Test-DbaPath -SqlInstance $dest -Path $SharedPath)) {
                Write-Message -Level Verbose -Message "Cannot access $SharedPath from $($destdb.Parent.Name)"
                $canmirror = $false
                $nexists = $false
            } else {
                $nexists = $true
            }

            if ($server.EngineEdition -ne $dest.EngineEdition) {
                Write-Message -Level Verbose -Message "This mirroring configuration is not supported. Because the principal server instance, $server, is $($server.EngineEdition) Edition, the mirror server instance must also be $($server.EngineEdition) Edition."
                $canmirror = $false
                $edition = $false
            } else {
                $edition = $true
            }

            # There's a better way to do this but I'm sleepy
            if ((Test-Bound -ParameterName Witness)) {
                if ($endpoints.Count -eq 3) {
                    $endpointpass = $true
                } else {
                    $endpointpass = $false
                }
            } else {
                if ($endpoints.Count -eq 2) {
                    $endpointpass = $true
                } else {
                    $endpointpass = $false
                }
            }

            $results = [pscustomobject]@{
                Primary                 = $Primary
                Mirror                  = $Mirror
                Witness                 = $Witness
                Database                = $db.Name
                RecoveryModel           = $db.RecoveryModel
                MirroringStatus         = $db.MirroringStatus
                State                   = $db.Status
                EndPoints               = $endpointpass
                DatabaseExistsOnMirror  = $destdbexists
                DatabaseExistsOnWitness = $witexists
                OnlineWitness           = $wexists
                EditionMatch            = $edition
                AccessibleShare         = $nexists
                DestinationDbStatus     = $destdb.Status
                WitnessDbStatus         = $witdb.Status
                ValidationPassed        = $canmirror
            }

            if ((Test-Bound -ParameterName Witness)) {
                $results | Select-DefaultView -Property Primary, Mirror, Witness, Database, RecoveryModel, MirroringStatus, State, EndPoints, DatabaseExistsOnMirror, OnlineWitness, DatabaseExistsOnWitness, EditionMatch, AccessibleShare, DestinationDbStatus, WitnessDbStatus, ValidationPassed
            } else {
                $results | Select-DefaultView -Property Primary, Mirror, Database, RecoveryModel, MirroringStatus, State, EndPoints, DatabaseExistsOnMirror, EditionMatch, AccessibleShare, DestinationDbStatus, ValidationPassed
            }
        }
    }
}

tools\dbatools\internal\functions\flowcontrol\Test-FunctionInterrupt.ps1

#ValidationTags#Messaging,FlowControl,Pipeline,CodeStyle#

function Test-FunctionInterrupt {
    <#
        .SYNOPSIS
            Internal tool, used to gracefully interrupt a function.

        .DESCRIPTION
            This helper function is designed to work in tandem with Stop-Function.
            When gracefully terminating a function, there is a major issue:
            "Return" will only stop the current one of the three blocks (Begin, Process, End).
            All other statements have side effects or produce lots of red text.

            So, Stop-Function writes a variable into the parent scope, that signals the function should cease.
            This function then checks for that very variable and returns true if it is set.

            This avoids having to handle odd variables in the parent function and causes the least impact on contributors.

        .EXAMPLE
            if (Test-FunctionInterrupt) { return }

            The calling function will stop if this function returns true.
       #>
    [CmdletBinding()]
    param (

    )

    $var = Get-Variable -Name "__dbatools_interrupt_function_78Q9VPrM6999g6zo24Qn83m09XF56InEn4hFrA8Fwhu5xJrs6r" -Scope 1 -ErrorAction Ignore
    if ($var.Value) { return $true }

    return $false
}

tools\dbatools\internal\functions\Get-DbaReportingService.ps1

function Get-DbaReportingService {
    <#
    .SYNOPSIS
        Gets the SQL Server Reporting Services on a computer.

    .DESCRIPTION
        Gets the SQL Server Reporting Services on one or more computers.

        Requires Local Admin rights on destination computer(s).

    .PARAMETER ComputerName
        The target SQL Server instance or instances.

    .PARAMETER InstanceName
        Only returns services that belong to the specific instances.

    .PARAMETER Credential
        Credential object used to connect to the computer as a different user.

    .PARAMETER ServiceName
        Can be used to specify service names explicitly, without looking for service types/instances.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .NOTES
        Tags: Service, SqlServer, Instance, Connect
        Author: Kirill Kravtsov ( @nvarscar )

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .LINK
        https://dbatools.io/Get-DbaService

    .EXAMPLE
        PS C:\> Get-DbaReportingService -ComputerName sqlserver2014a

        Gets the Reporting Services on computer sqlserver2014a.

    .EXAMPLE
        PS C:\> $cred = Get-Credential WindowsUser
        PS C:\> Get-DbaReportingService -ComputerName sql1,sql2 -Credential $cred  | Out-GridView

        Gets the Reporting Services on computers sql1 and sql2 via the user WindowsUser, and shows them in a grid view.

    .EXAMPLE
        PS C:\> Get-DbaReportingService -ComputerName sql1,sql2 -InstanceName MSSQLSERVER

        Gets the Reporting Services related to the default instance MSSQLSERVER on computers sql1 and sql2.

    .EXAMPLE
        PS C:\> $MyServers =  Get-Content .\servers.txt
        PS C:\> Get-DbaReportingService -ComputerName $MyServers -ServiceName MSSQLSERVER,SQLSERVERAGENT

        Gets the Reporting Services with ServiceName MSSQLSERVER or SQLSERVERAGENT  for all the servers that are stored in the file. Every line in the file can only contain one hostname for a server.

    .EXAMPLE
        PS C:\> $services = Get-DbaReportingService -ComputerName sql1
        PS C:\> $services.ChangeStartMode('Manual')

        Gets the Reporting Services on computer sql1 and changes their startup mode to 'Manual'.

    .EXAMPLE
        PS C:\> (Get-DbaReportingService -ComputerName sql1).Restart($true)

        Calls a Restart method for each Reporting service on computer sql1.

    #>
    [CmdletBinding()]
    param (
        [parameter(ValueFromPipeline, Position = 1)]
        [Alias("cn", "host", "Server")]
        [DbaInstanceParameter[]]$ComputerName = $env:COMPUTERNAME,
        [Alias("Instance")]
        [string[]]$InstanceName,
        [PSCredential]$Credential,
        [string[]]$ServiceName,
        [Alias('Silent')]
        [switch]$EnableException
    )
    begin {
        $searchClause = ""
        #If filtering by service name create a dynamic WHERE clause
        if ($ServiceName) {
            $searchClause = " WHERE ServiceName = '$($ServiceName -join "' OR ServiceName = '")'"
        }
    }
    process {
        foreach ($computer in $ComputerName) {
            Write-Message -Level VeryVerbose -Message "Getting Reporting Server namespace on $Computer" -Target $Computer
            try {
                $namespaces = Get-DbaCmObject -ComputerName $Computer -NameSpace root\Microsoft\SQLServer\ReportServer -Query "Select Name FROM __NAMESPACE" -EnableException -Credential $credential
            } catch {
                Write-Message -Level Verbose -Message "No SQLServer\ReportServer Namespace on $Computer. Please note that this function is available from SQL 2005 up."
                return
            }
            # querying SqlService namespace
            ForEach ($namespace in $namespaces) {
                Write-Message -Level Verbose -Message "Getting version from the namespace $($namespace.Name) on $Computer." -Target $Computer
                try {
                    $namespaceVersion = Get-DbaCmObject -ComputerName $Computer -Namespace "root\Microsoft\SQLServer\ReportServer\$($namespace.Name)" -Query "SELECT Name FROM __NAMESPACE" -EnableException
                } catch {
                    Stop-Function -EnableException $EnableException -Message "No version Namespace on $Computer. Please note that this function is available from SQL 2005 up." -Continue
                }
                try {
                    $cimQuery = "SELECT * FROM MSReportServer_ConfigurationSetting" + $searchClause
                    $services = Get-DbaCmObject -ComputerName $Computer -Namespace "root\Microsoft\SQLServer\ReportServer\$($namespace.Name)\$($namespaceVersion.Name)\Admin" -Query $cimQuery -EnableException
                } catch {
                    Stop-Function -EnableException $EnableException -Message "Failed to acquire services from namespace $($namespace.Name)\$($namespaceVersion.Name)." -Target $Computer -ErrorRecord $_ -Continue
                }
                ForEach ($service in $services) {
                    if (!$InstanceName -or $service.InstanceName -in $InstanceName) {
                        #Add other properties and methods
                        Add-Member -Force -InputObject $service -MemberType NoteProperty -Name ServiceType -Value 'SSRS'
                        Add-Member -Force -InputObject $service -MemberType AliasProperty -Name StartName -Value WindowsServiceIdentityActual

                        try {
                            $service32 = Get-DbaCmObject -ComputerName $Computer -Namespace "root\cimv2" -Query "SELECT * FROM Win32_Service WHERE Name = '$($service.ServiceName)'" -EnableException
                        } catch {
                            Stop-Function -EnableException $EnableException -Message "Failed to acquire services32" -Target $Computer -ErrorRecord $_ -Continue
                        }
                        Add-Member -Force -InputObject $service -MemberType NoteProperty -Name ComputerName -Value $service32.SystemName
                        Add-Member -Force -InputObject $service -MemberType NoteProperty -Name State -Value $service32.State
                        $startMode = switch ($service32.StartMode) {
                            Auto { 'Automatic' } #Replacing for consistency to match other SQL Services
                            default { $_ }
                        }
                        Add-Member -Force -InputObject $service -MemberType NoteProperty -Name StartMode -Value $startMode
                        Add-Member -Force -InputObject $service -MemberType NoteProperty -Name DisplayName -Value $service32.DisplayName
                        Add-Member -Force -InputObject $service -NotePropertyName ServicePriority -NotePropertyValue 100
                        Add-Member -Force -InputObject $service -MemberType ScriptMethod -Name "Stop" -Value {
                            param ([bool]$Force = $false)
                            Stop-DbaService -InputObject $this -Force:$Force
                        }
                        Add-Member -Force -InputObject $service -MemberType ScriptMethod -Name "Start" -Value { Start-DbaService -InputObject $this }
                        Add-Member -Force -InputObject $service -MemberType ScriptMethod -Name "Restart" -Value {
                            param ([bool]$Force = $false)
                            Restart-DbaService -InputObject $this -Force:$Force
                        }
                        Add-Member -Force -InputObject $service -MemberType ScriptMethod -Name "ChangeStartMode" -Value {
                            param (
                                [parameter(Mandatory)]
                                [string]$Mode
                            )
                            $supportedModes = @("Automatic", "Manual", "Disabled")
                            if ($Mode -notin $supportedModes) {
                                Stop-Function -Message ("Incorrect mode '$Mode'. Use one of the following values: {0}" -f ($supportedModes -join ' | ')) -EnableException $false -FunctionName 'Get-DbaService'
                                Return
                            }
                            Set-ServiceStartMode -InputObject $this -Mode $Mode -ErrorAction Stop
                            $this.StartMode = $Mode
                        }
                        $defaults = "ComputerName", "ServiceName", "ServiceType", "InstanceName", "DisplayName", "StartName", "State", "StartMode"
                        Select-DefaultView -InputObject $service -Property $defaults -TypeName DbaSqlService
                    }
                }
            }
        }
    }
    end {

    }
}

tools\dbatools\internal\functions\Invoke-SmoCheck.ps1

function Invoke-SmoCheck {
    <#
    .SYNOPSIS
    Checks for PowerShell SMO version vs SQL Server's SMO version.

    #>
    [CmdletBinding()]
    param (
        [Parameter(Mandatory)]
        [object]$SqlInstance
    )

    if ($script:smocheck -ne $true) {
        $script:smocheck = $true
        $smo = (([AppDomain]::CurrentDomain.GetAssemblies() | Where-Object { $_.Fullname -like "Microsoft.SqlServer.SMO,*" }).FullName -Split ", ")[1]
        $smo = ([version]$smo.TrimStart("Version=")).Major
        $serverversion = $SqlInstance.version.major

        if ($serverversion - $smo -gt 1) {
            Write-Warning "Your version of SMO is $smo, which is significantly older than $($SqlInstance.name)'s version $($SqlInstance.version.major)."
            Write-Warning "This may present an issue when migrating certain portions of SQL Server."
            Write-Warning "If you encounter issues, consider upgrading SMO."
        }
    }
}

tools\dbatools\internal\functions\Get-DBAServiceErrorMessage.ps1

function Get-DbaServiceErrorMessage {
    <#
    .SYNOPSIS
    Internal function. Returns the list of error code messages for Windows service management.

    #>
    param(
        [parameter(ValueFromPipeline, Position = 1)]
        [int]$ErrorNumber
    )
    $returnCodes = @("The request was accepted.",
        "The request is not supported.",
        "The user did not have the necessary access.",
        "The service cannot be stopped because other services that are running are dependent on it.",
        "The requested control code is not valid, or it is unacceptable to the service.",
        "The requested control code cannot be sent to the service because the state of the service (Win32_BaseService.State property) is equal to 0, 1, or 2.",
        "The service has not been started.",
        "The service did not respond to the start request in a timely fashion.",
        "Unknown failure when starting the service.",
        "The directory path to the service executable file was not found.",
        "The service is already running.",
        "The database to add a new service is locked.",
        "A dependency this service relies on has been removed from the system.",
        "The service failed to find the service needed from a dependent service.",
        "The service has been disabled from the system.",
        "The service does not have the correct authentication to run on the system.",
        "This service is being removed from the system.",
        "The service has no execution thread.",
        "The service has circular dependencies when it starts.",
        "A service is running under the same name.",
        "The service name has invalid characters.",
        "Invalid parameters have been passed to the service.",
        "The account under which this service runs is either invalid or lacks the permissions to run the service.",
        "The service exists in the database of services available from the system.",
        "The service is currently paused in the system.")
    if ($ErrorNumber) {
        if ($ErrorNumber -in 0..($returnCodes.Length - 1)) { Return $returnCodes[$ErrorNumber] }
        else { Return "Unknown error." }
    } else {
        $returnCodes
    }
}

tools\dbatools\internal\functions\Get-DbaSysDbUserObjectScript.ps1

function Get-DbaSysDbUserObjectScript {
    <#
        .SYNOPSIS
            Gets all user objects found in source SQL Server's master, msdb and model databases to the destination.
       #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter]$SqlInstance,
        [PSCredential]$SqlCredential,
        [switch]$EnableException
    )
    begin {
        function get-sqltypename ($type) {
            switch ($type) {
                "VIEW" { "view" }
                "SQL_TABLE_VALUED_FUNCTION" { "User table valued fsunction" }
                "DEFAULT_CONSTRAINT" { "User default constraint" }
                "SQL_STORED_PROCEDURE" { "User stored procedure" }
                "RULE" { "User rule" }
                "SQL_INLINE_TABLE_VALUED_FUNCTION" { "User inline table valued function" }
                "SQL_TRIGGER" { "User server trigger" }
                "SQL_SCALAR_FUNCTION" { "User scalar function" }
                default { $type }
            }
        }
    }
    process {
        try {
            $server = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential
        } catch {
            Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $Source
            return
        }

        if (!(Test-SqlSa -SqlInstance $server -SqlCredential $SqlCredential)) {
            Stop-Function -Message "Not a sysadmin on $source. Quitting."
            return
        }

        $systemDbs = "master", "model", "msdb"

        foreach ($systemDb in $systemDbs) {
            $smodb = $server.databases[$systemDb]
            $destdb = $server.databases[$systemDb]
            Write-Output "USE $systemDb"
            Write-Output "GO"
            $tables = $smodb.Tables | Where-Object IsSystemObject -ne $true
            $schemas = $smodb.Schemas | Where-Object IsSystemObject -ne $true
            $transfer = New-Object Microsoft.SqlServer.Management.Smo.Transfer $smodb
            $null = $transfer.CopyAllObjects = $false
            $null = $transfer.Options.WithDependencies = $true
            $null = $transfer.ObjectList.Add($schema)
            $null = $transfer.Options.ScriptBatchTerminator = $true
            try { $transfer.ScriptTransfer() }
            catch { }
            Write-Output "GO"

            foreach ($table in $tables) {
                Write-Output "GO"
                $transfer = New-Object Microsoft.SqlServer.Management.Smo.Transfer $smodb
                $null = $transfer.CopyAllObjects = $false
                $null = $transfer.Options.WithDependencies = $true
                $null = $transfer.Options.ScriptBatchTerminator = $true
                $null = $transfer.ObjectList.Add($table)
                try { $transfer.ScriptTransfer() } catch {}
            }

            $userobjects = Get-DbaModule -SqlInstance $server -Database $systemDb -ExcludeSystemObjects | Sort-Object Type
            Write-Message -Level Verbose -Message "Copying from $systemDb"
            foreach ($userobject in $userobjects) {
                Write-Output "GO"
                $name = "[$($userobject.SchemaName)].[$($userobject.Name)]"
                $db = $userobject.Database
                $type = get-sqltypename $userobject.Type
                $userobject.Definition
                $schema = $userobject.SchemaName
                $result = Get-DbaModule -SqlInstance $server -ExcludeSystemObjects -Database $db |
                    Where-Object { $psitem.Name -eq $userobject.Name -and $psitem.Type -eq $userobject.Type }
                $smobject = switch ($userobject.Type) {
                    "VIEW" { $smodb.Views.Item($userobject.Name, $userobject.SchemaName) }
                    "SQL_STORED_PROCEDURE" { $smodb.StoredProcedures.Item($userobject.Name, $userobject.SchemaName) }
                    "RULE" { $smodb.Rules.Item($userobject.Name, $userobject.SchemaName) }
                    "SQL_TRIGGER" { $smodb.Triggers.Item($userobject.Name, $userobject.SchemaName) }
                    "SQL_TABLE_VALUED_FUNCTION" { $smodb.UserDefinedFunctions.Item($name) }
                    "SQL_INLINE_TABLE_VALUED_FUNCTION" { $smodb.UserDefinedFunctions.Item($name) }
                    "SQL_SCALAR_FUNCTION" { $smodb.UserDefinedFunctions.Item($name) }
                }

                $smobject = switch ($userobject.Type) {
                    "VIEW" { $smodb.Views.Item($userobject.Name, $userobject.SchemaName) }
                    "SQL_STORED_PROCEDURE" { $smodb.StoredProcedures.Item($userobject.Name, $userobject.SchemaName) }
                    "RULE" { $smodb.Rules.Item($userobject.Name, $userobject.SchemaName) }
                    "SQL_TRIGGER" { $smodb.Triggers.Item($userobject.Name, $userobject.SchemaName) }
                }
                if ($smobject) {
                    $transfer = New-Object Microsoft.SqlServer.Management.Smo.Transfer $smodb
                    $null = $transfer.CopyAllObjects = $false
                    $null = $transfer.Options.WithDependencies = $true
                    $null = $transfer.ObjectList.Add($smobject)
                    $null = $transfer.Options.ScriptBatchTerminator = $true
                    try { $transfer.ScriptTransfer() } catch {}
                }
            }
        }
    }
}

tools\dbatools\internal\functions\Join-AdminUnc.ps1

function Join-AdminUnc {
    <#
    .SYNOPSIS
    Internal function. Parses a path to make it an admin UNC.
    #>
    [CmdletBinding()]
    param (
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [string]$servername,
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [string]$filepath

    )

    if (!$filepath) { return }
    if ($filepath.StartsWith("\\")) { return $filepath }

    $servername = $servername.Split("\")[0]

    if ($filepath.length -gt 0 -and $filepath -ne [System.DbNull]::Value) {
        $newpath = Join-Path "\\$servername\" $filepath.replace(':', '$')
        return $newpath
    } else { return }
}

tools\dbatools\internal\functions\Join-SomePath.ps1

function Join-SomePath {
    <#
    An internal command that does not require the local path to exist

    Boo, this does not work, but keeping it for future ref.
       #>
    [CmdletBinding()]
    param (
        [string]$Path,
        [string]$ChildPath
    )
    process {
        [IO.Path]::Combine($Path, $ChildPath)
    }
}

tools\dbatools\internal\functions\Get-DirectoryRestoreFile.ps1

function Get-DirectoryRestoreFile {
    <#
.SYNOPSIS
Internal Function to get SQL Server backfiles from a specified folder

.DESCRIPTION
Takes path, checks for validity. Scans for usual backup file
    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [string]$Path,
        [switch]$Recurse,
        [Alias('Silent')]
        [switch]$EnableException
    )

    Write-Message -Level Verbose -Message "Starting"
    Write-Message -Level Verbose -Message "Checking Path"
    if ((Test-Path $Path) -ne $true) {
        Stop-Function -Message "$Path is not reachable"
        return
    }
    #Path needs to end \* to use includes, which is faster than Where-Object
    $PathCheckArray = $path.ToCharArray()
    if ($PathCheckArray[-2] -eq '\' -and $PathCheckArray[-1] -eq '*') {
        #We're good
    } elseif ($PathCheckArray[-2] -ne '\' -and $PathCheckArray[-1] -eq '*') {
        $Path = ($PathCheckArray[0..(($PathCheckArray.length) - 2)] -join ('')) + "\*"
    } elseif ($PathCheckArray[-2] -eq '\' -and $PathCheckArray[-1] -ne '*') {
        #Append a * to the end
        $Path = "$Path*"
    } elseif ($PathCheckArray[-2] -ne '\' -and $PathCheckArray[-1] -ne '*') {
        #Append a \* to the end
        $Path = "$Path\*"
    }
    Write-Message -Level Verbose -Message "Scanning $path"
    $Results = Get-ChildItem -path $Path -Recurse:$Recurse | Where-Object {$_.PsIsContainer -eq $false}
    return $Results
}

tools\dbatools\internal\functions\Get-ErrorMessage.ps1

function Get-ErrorMessage {
    [CmdletBinding()]
    param (
        [Parameter(Mandatory, ValueFromPipeline)]
        [System.Management.Automation.ErrorRecord]$Record
    )
    process {
        $innermessage = $Record.Exception.InnerException.InnerException.InnerException.InnerException.InnerException.Message
        if (-not $innermessage) { $innermessage = $Record.Exception.InnerException.InnerException.InnerException.InnerException.Message }
        if (-not $innermessage) { $innermessage = $Record.Exception.InnerException.InnerException.InnerException.Message }
        if (-not $innermessage) { $innermessage = $Record.Exception.InnerException.InnerException.Message }
        if (-not $innermessage) { $innermessage = $Record.Exception.InnerException.Message }
        if (-not $innermessage) { $innermessage = $Record.Exception.Message }
        return $innermessage
    }
}

tools\dbatools\internal\functions\Get-OfflineSqlFileStructure.ps1

function Get-OfflineSqlFileStructure {
    <#
.SYNOPSIS
Internal function. Returns dictionary object that contains file structures for SQL databases.

    #>
    [CmdletBinding()]
    param (
        [Parameter(Mandatory, Position = 0)]
        [ValidateNotNullOrEmpty()]
        [object]$SqlInstance,
        [Parameter(Mandatory, Position = 1)]
        [string]$dbname,
        [Parameter(Mandatory, Position = 2)]
        [object]$filelist,
        [Parameter(Position = 3)]
        [bool]$ReuseSourceFolderStructure,
        [PSCredential]$SqlCredential
    )

    $server = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential

    $destinationfiles = @{ };
    $logfiles = $filelist | Where-Object { $_.Type -eq "L" }
    $datafiles = $filelist | Where-Object { $_.Type -ne "L" }
    $filestream = $filelist | Where-Object { $_.Type -eq "S" }

    if ($filestream) {
        $sql = "select coalesce(SERVERPROPERTY('FilestreamConfiguredLevel'),0) as fs"
        $fscheck = $server.databases['master'].ExecuteWithResults($sql)
        if ($fscheck.tables.fs -eq 0) { return $false }
    }

    # Data Files
    foreach ($file in $datafiles) {
        # Destination File Structure
        $d = @{ }
        if ($ReuseSourceFolderStructure -eq $true) {
            $d.physical = $file.PhysicalName
        } else {
            $directory = Get-SqlDefaultPaths $server data
            $filename = Split-Path $($file.PhysicalName) -leaf
            $d.physical = "$directory\$filename"
        }

        $d.logical = $file.LogicalName
        $destinationfiles.add($file.LogicalName, $d)
    }

    # Log Files
    foreach ($file in $logfiles) {
        $d = @{ }
        if ($ReuseSourceFolderStructure) {
            $d.physical = $file.PhysicalName
        } else {
            $directory = Get-SqlDefaultPaths $server log
            $filename = Split-Path $($file.PhysicalName) -leaf
            $d.physical = "$directory\$filename"
        }

        $d.logical = $file.LogicalName
        $destinationfiles.add($file.LogicalName, $d)
    }

    return $destinationfiles
}

tools\dbatools\internal\functions\Get-PasswordHash.ps1

function Get-PasswordHash {
    <#
    .SYNOPSIS
    Generates a password hash for SQL Server login

    .DESCRIPTION
    Generates a hash string based on the plaintext or securestring password and a SQL Server version. Salt is optional

    .PARAMETER Password
    Either plain text or Securestring password

    .PARAMETER SqlMajorVersion
    Major version of the SQL Server. Defines the hash algorithm.

    .PARAMETER byteSalt
    Optional. Inserts custom salt into the hash instead of randomly generating new salt

    .NOTES
    Tags: Login, Internal
    Author: Kirill Kravtsov (@nvarscar)
    dbatools PowerShell module (https://dbatools.io, [email protected])
   Copyright: (c) 2018 by dbatools, licensed under MIT
    License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
    Get-PasswordHash $securePassword 11

    Generates password hash for SQL 2012

    .EXAMPLE
    Get-PasswordHash $securePassword 9 $byte

    Generates password hash for SQL 2005 using custom salt from the $byte variable

    #>
    param (
        [object]$Password,
        $SqlMajorVersion,
        [byte[]]$byteSalt
    )
    #Choose hash algorithm
    if ($SqlMajorVersion -lt 11) {
        $algorithm = 'SHA1'
        $hashVersion = '0100'
    } else {
        $algorithm = 'SHA512'
        $hashVersion = '0200'
    }

    #Generate salt
    if (!$byteSalt) {
        0 .. 3 | ForEach-Object { $byteSalt += Get-Random -Minimum 0 -Maximum 255 }
    }

    #Convert salt to a hex string
    [string]$stringSalt = ""
    $byteSalt | ForEach-Object { $stringSalt += ("{0:X}" -f $_).PadLeft(2, "0") }

    #Extract password
    if ($Password.GetType().Name -eq 'SecureString') {
        $cred = New-Object System.Management.Automation.PSCredential -ArgumentList 'foo', $Password
        $plainPassword = $cred.GetNetworkCredential().Password
    } else {
        $plainPassword = $Password
    }
    #Get byte representation of the password string
    $enc = [system.Text.Encoding]::Unicode
    $data = $enc.GetBytes($plainPassword)
    #Run hash algorithm
    $hash = [Security.Cryptography.HashAlgorithm]::Create($algorithm)
    $bytes = $hash.ComputeHash($data + $byteSalt)
    #Construct hex string
    $hashString = "0x$hashVersion$stringSalt"
    $bytes | ForEach-Object { $hashString += ("{0:X2}" -f $_).PadLeft(2, "0") }
    #Add UPPERCASE hash for SQL 2000 and lower
    if ($SqlMajorVersion -lt 9) {
        $data = $enc.GetBytes($plainPassword.ToUpper())
        $bytes = $hash.ComputeHash($data + $byteSalt)
        $bytes | ForEach-Object { $hashString += ("{0:X2}" -f $_).PadLeft(2, "0") }
    }
    return $hashString
}

tools\dbatools\internal\functions\Get-DbaFileStreamFolder.ps1

function Get-DbaFileStreamFolder {
    <#

    .SYNOPSIS
        Returns basic information about Filestream folders from a Sql Instance

    .DESCRIPTION
        Given a SQL Instance, and an optional list of databases returns the FileStream containing folders on that Instance. Without the Database parameter, all dbs with FileStream are returned

    .PARAMETER SqlInstance
        The Sql Server instance to be queries

    .PARAMETER SqlCredential
        A Sql Credential to connect to $SqlInstance

    .PARAMETER Database
        Database to be tested, multiple databases may be specified as a comma seperated list.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .EXAMPLE
        Get-DbaFileStreamFolder -SqlInstance server1\instance2

        Returns all FileStream folders from server1\instance2

    .EXAMPLE
        Get-DbaFileStreamFolder -SqlInstance server1\instance2 -Database Archive

        Returns any FileStream folders from the Archive database on server1\instance2

    .NOTES
    Author:Stuart Moore (@napalmgram stuart-moore.com )


    Website: https://dbatools.io
    Copyright: (c) 2018 by dbatools, licensed under MIT
    License: MIT https://opensource.org/licenses/MIT
       #>
    param (
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string[]]$Database,
        [switch]$EnableException
    )

    begin {
        try {
            $server = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential
        } catch {
            Stop-Function -Message "Failed to process Instance $SqlInstance." -InnerErrorRecord $_ -Target $SqlInstance -Continue
        }
    }

    process {
        $sql = "select d.name as 'dbname', mf.Physical_Name from sys.master_files mf inner join sys.databases d on mf.database_id = d.database_id
        where mf.type=2"
        $databases = @()
        if ($null -ne $Database) {
            ForEach ($db in $Database) {
                $databases += "'$db'"
            }
            $sql = $sql + " and d.name in ( $($databases -join ',') )"
        }

        $results = $server.ConnectionContext.ExecuteWithResults($sql).Tables.Rows | Select-Object * -ExcludeProperty  RowError, Rowstate, table, itemarray, haserrors
        foreach ($result in $results) {
            [PsCustomObject]@{
                ServerInstance   = $SqlInstance
                Database         = $result.dbname
                FileStreamFolder = $result.Physical_Name
            }
        }


    }

    END {}
}

tools\dbatools\internal\functions\Get-ResourceState.ps1

function Get-ResourceState ($state) {
    switch ($state) {
        -1 { "Unknown" }
        0 { "Inherited" }
        1 { "Initializing" }
        2 { "Online" }
        3 { "Offline" }
        4 { "Failed" }
        128 { "Pending" }
        129 { "Online Pending" }
        130 { "Offline Pending" }
    }
}

tools\dbatools\internal\functions\Get-RestoreContinuableDatabase.ps1

function Get-RestoreContinuableDatabase {
    <#
    .SYNOPSIS
    Gets a list of databases from a SQL instance that are in a state for further restores

    .DESCRIPTION
    Takes a SQL instance and checks for databases with a redo_start_lsn value, and returns the database name and that value
    -gt SQl 2005 it comes from master.sys.master_files
    -eq SQL 2000 DBCC DBINFO
    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [object]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Alias('Silent')]
        [switch]$EnableException
    )

    try {
        $Server = Connect-SqlInstance -Sqlinstance $SqlInstance -SqlCredential $SqlCredential
    } catch {
        Write-Message -Level Warning -Message "Cannot connect to $SqlInstance"
        break
    }
    if ($Server.VersionMajor -ge 9) {
        $sql = "select distinct db_name(database_id) as 'Database', differential_base_lsn, redo_start_lsn, redo_start_fork_guid as 'FirstRecoveryForkID' from master.sys.master_files where redo_start_lsn is not NULL"
    } else {
        $sql = "
              CREATE TABLE #db_info
                (
                ParentObject NVARCHAR(128) COLLATE database_default ,
                Object       NVARCHAR(128) COLLATE database_default,
                Field        NVARCHAR(128) COLLATE database_default,
                Value        SQL_VARIANT
                )"
    }
    $server.ConnectionContext.ExecuteWithResults($sql).Tables.Rows
}

tools\dbatools\internal\functions\Get-SaLoginName.ps1

function Get-SaLoginName {
    <#
    .SYNOPSIS
    Gets the login matching the standard "sa" user

    .DESCRIPTION
    Gets the login matching the standard "sa" user, useful in case of renames

    .PARAMETER SqlInstance
    The SQL Server instance.

    .PARAMETER SqlCredential
    Allows you to login to servers using SQL Logins instead of Windows Authentication (AKA Integrated or Trusted).

    .EXAMPLE
    Get-SaLoginName -SqlInstance base\sql2016

    .NOTES
        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT
       #>
    [CmdletBinding()]
    param (
        [Parameter(Mandatory)]
        [Alias("ServerInstance", "SqlServer")]
        [object]$SqlInstance,
        [PSCredential]$SqlCredential
    )

    $server = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential
    $saname = ($server.logins | Where-Object { $_.id -eq 1 }).Name

    return $saname
}

tools\dbatools\internal\functions\Get-SmoServerForDynamicParams.ps1

function Get-SmoServerForDynamicParams {
    ##############################
    # THIS DOES NOT SEEM TO BE USED
    ##############################
    if ($fakeBoundParameter.length -eq 0) { return }

    $SqlInstance = $fakeBoundParameter['SqlInstance']
    $sqlcredential = $fakeBoundParameter['SqlCredential']

    if ($null -eq $SqlInstance) {
        $SqlInstance = $fakeBoundParameter['sqlinstance']
    }
    if ($null -eq $SqlInstance) {
        $SqlInstance = $fakeBoundParameter['source']
    }
    if ($null -eq $sqlcredential) {
        $sqlcredential = $fakeBoundParameter['Credential']
    }

    if ($SqlInstance) {
        Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential -ParameterConnection
    }
}

tools\dbatools\internal\functions\Get-SqlCmdVars.ps1

function Get-SqlCmdVars {
    <#
        .SYNOPSIS
            Retrieves the values of PowerShell parameters and updates values of SqlmdVars listed in the publish.xml.

        .DESCRIPTION
            Attempt to resolve SQLCmd variables via matching powershell variables explicitly defined in the current context.
            To try and avoid 'bad' default values getting deployed, block a deployment if we have SqlCmd variables that aren't defined in current context.
            Function has one reference and is executed when the "getSqlCmdVars" switch is included.
        .PARAMETER SqlCommandVariableValues
            Mandatory. The SqlCommandVariableValues from the DeployOptions property in the Microsoft.SqlServer.Dac.DacProfile
        .PARAMETER EnableException
            By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
            This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
            Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

        .NOTES
            Author: Richie lee (@bzzzt_io)

            Website: https://dbatools.io
            Copyright: (c) 2018 by dbatools, licensed under MIT
            License: MIT https://opensource.org/licenses/MIT
        .LINK
            https://dbatools.io/Test-Noun

        .EXAMPLE
        Imagine content of MyDbProject.publish.xml is as follows -
        <?xml version="1.0" encoding="utf-8"?>
        <Project ToolsVersion="14.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
        <PropertyGroup>
            <IncludeCompositeObjects>True</IncludeCompositeObjects>
            <TargetDatabaseName>MyDbProject</TargetDatabaseName>
            <DeployScriptFileName>MyDbProject.sql</DeployScriptFileName>
            <TargetConnectionString>Data Source=.;Integrated Security=True;Persist Security Info=False;Pooling=False;MultipleActiveResultSets=False;Connect Timeout=60;Encrypt=False;TrustServerCertificate=True</TargetConnectionString>
            <BlockOnPossibleDataLoss>True</BlockOnPossibleDataLoss>
            <CreateNewDatabase>False</CreateNewDatabase>
            <ProfileVersionNumber>1</ProfileVersionNumber>
        </PropertyGroup>
        <ItemGroup>
            <SqlCmdVariable Include="DeployTag">
            <Value>OldValue</Value>
            </SqlCmdVariable>
        </ItemGroup>
        </Project>
        We will need one PowerShell parameter named $DeployTag to update the value

        The following scenario will fail as no $deployTag -
        "
            $publishXml =  "C:\MyDbProject\bin\Debug\MyDbProject.publish.xml"
            $dacProfile = [Microsoft.SqlServer.Dac.DacProfile]::Load($publishXml)
            Get-SqlCmdVars $dacProfile.DeployOptions.SqlCommandVariableValues -EnableException
        "
        This scenario will pass.
        "
            $deployTag = "NewValue"
            $publishXml =  "C:\MyDbProject\bin\Debug\MyDbProject.publish.xml"
            $dacProfile = [Microsoft.SqlServer.Dac.DacProfile]::Load($publishXml)
            Get-SqlCmdVars $dacProfile.DeployOptions.SqlCommandVariableValues -EnableException
        "
       #>
    [CmdletBinding()]
    param
    (
        [Parameter(Mandatory)]
        $SqlCommandVariableValues,
        [switch]$EnableException
    )
    $missingVariables = @()
    $keys = $($SqlCommandVariableValues.Keys)
    foreach ($var in $keys) {
        if (Test-Path variable:$var) {
            $value = Get-Variable $var -ValueOnly
            $SqlCommandVariableValues[$var] = $value
        } else {
            $missingVariables += $var
        }
    }
    if ($missingVariables.Count -gt 0) {
        $errorMsg = 'The following SqlCmd variables are not defined in the session (but are defined in the publish profile): {0}' -f ($missingVariables -join " `n")
        Stop-Function -Message $errorMsg -EnableException $EnableException
    }
}

tools\dbatools\internal\functions\Get-SqlDefaultPaths.ps1

function Get-SqlDefaultPaths {
    <#
    .SYNOPSIS
        Internal function. Returns the default data and log paths for SQL Server. Needed because SMO's server.defaultpath is sometimes null.
    #>
    [CmdletBinding()]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseSingularNouns", "")]
    param (
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [Alias("ServerInstance", "SqlServer")]
        [object]$SqlInstance,
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [string]$filetype,
        [PSCredential]$SqlCredential
    )

    try {
        if ($SqlInstance -isnot [Microsoft.SqlServer.Management.Smo.SqlSmoObject]) {
            $Server = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential
        } else {
            $server = $SqlInstance
        }
    } catch {
        Write-Message -Lvel Warning -Message "Cannot connect to $SqlInstance"
        break
    }
    switch ($filetype) { "mdf" { $filetype = "data" } "ldf" { $filetype = "log" } }

    if ($filetype -eq "log") {
        # First attempt
        $filepath = $server.DefaultLog
        # Second attempt
        if ($filepath.Length -eq 0) { $filepath = $server.Information.MasterDbLogPath }
        # Third attempt
        if ($filepath.Length -eq 0) {
            $sql = "select SERVERPROPERTY('InstanceDefaultLogPath') as physical_name"
            $filepath = $server.ConnectionContext.ExecuteScalar($sql)
        }
    } else {
        # First attempt
        $filepath = $server.DefaultFile
        # Second attempt
        if ($filepath.Length -eq 0) { $filepath = $server.Information.MasterDbPath }
        # Third attempt
        if ($filepath.Length -eq 0) {
            $sql = "select SERVERPROPERTY('InstanceDefaultDataPath') as physical_name"
            $filepath = $server.ConnectionContext.ExecuteScalar($sql)
        }
    }

    if ($filepath.Length -eq 0) { throw "Cannot determine the required directory path" }
    $filepath = $filepath.TrimEnd("\")
    return $filepath
}

tools\dbatools\internal\functions\Get-SqlDefaultSpConfigure.ps1

function Get-SqlDefaultSpConfigure {
    <#
        .SYNOPSIS
        Internal function. Returns the default sp_configure options for a given version of SQL Server.

        .NOTES
        Server Configuration Options BOL (links subject to change):
        SQL Server 2017 - https://technet.microsoft.com/en-us/library/ms189631(v=sql.140).aspx
        SQL Server 2016 - https://technet.microsoft.com/en-us/library/ms189631(v=sql.130).aspx
        SQL Server 2014 - http://technet.microsoft.com/en-us/library/ms189631(v=sql.120).aspx
        SQL Server 2012 - http://technet.microsoft.com/en-us/library/ms189631(v=sql.110).aspx
        SQL Server 2008 R2 - http://technet.microsoft.com/en-us/library/ms189631(v=sql.105).aspx
        SQL Server 2008 - http://technet.microsoft.com/en-us/library/ms189631(v=sql.100).aspx
        SQL Server 2005 - http://technet.microsoft.com/en-us/library/ms189631(v=sql.90).aspx
        SQL Server 2000 - http://technet.microsoft.com/en-us/library/aa196706(v=sql.80).aspx (requires PDF download)

        .EXAMPLE
        Get-SqlDefaultSpConfigure -SqlVersion 11
        Returns a list of sp_configure (sys.configurations) items for SQL 2012.

    #>
    [CmdletBinding()]
    param (
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [Alias("Version")]
        [object]$SqlVersion
    )

    switch ($SqlVersion) {

        #region SQL2000
        8 {
            [pscustomobject]@{
                "affinity mask"                  = 0
                "allow updates"                  = 0
                "awe enabled"                    = 0
                "c2 audit mode"                  = 0
                "cost threshold for parallelism" = 5
                "Cross DB Ownership Chaining"    = 0
                "cursor threshold"               = -1
                "default full-text language"     = 1033
                "default language"               = 0
                "fill factor (%)"                = 0
                "index create memory (KB)"       = 0
                "lightweight pooling"            = 0
                "locks"                          = 0
                "max degree of parallelism"      = 0
                "max server memory (MB)"         = 2147483647
                "max text repl size (B)"         = 65536
                "max worker threads"             = 255
                "media retention"                = 0
                "min memory per query (KB)"      = 1024
                "min server memory (MB)"         = 0
                "nested triggers"                = 1
                "network packet size (B)"        = 4096
                "open objects"                   = 0
                "priority boost"                 = 0
                "query governor cost limit"      = 0
                "query wait (s)"                 = -1
                "recovery interval (min)"        = 0
                "remote access"                  = 1
                "remote login timeout (s)"       = 20
                "remote proc trans"              = 0
                "remote query timeout (s)"       = 600
                "scan for startup procs"         = 0
                "set working set size"           = 0
                "show advanced options"          = 0
                "two digit year cutoff"          = 2049
                "user connections"               = 0
                "user options"                   = 0
            }
        }
        #endregion SQL2000

        #region SQL2005
        9 {
            [pscustomobject]@{
                "Ad Hoc Distributed Queries"         = 0
                "affinity I/O mask"                  = 0
                "affinity64 I/O mask"                = 0
                "affinity mask"                      = 0
                "affinity64 mask"                    = 0
                "Agent XPs"                          = 0
                "allow updates"                      = 0
                "awe enabled"                        = 0
                "blocked process threshold"          = 0
                "c2 audit mode"                      = 0
                "clr enabled"                        = 0
                "common criteria compliance enabled" = 0
                "cost threshold for parallelism"     = 5
                "cross db ownership chaining"        = 0
                "cursor threshold"                   = -1
                "Database Mail XPs"                  = 0
                "default full-text language"         = 1033
                "default language"                   = 0
                "default trace enabled"              = 1
                "disallow results from triggers"     = 0
                "fill factor (%)"                    = 0
                "ft crawl bandwidth (max)"           = 100
                "ft crawl bandwidth (min)"           = 0
                "ft notify bandwidth (max)"          = 100
                "ft notify bandwidth (min)"          = 0
                "index create memory (KB)"           = 0
                "in-doubt xact resolution"           = 0
                "lightweight pooling"                = 0
                "locks"                              = 0
                "max degree of parallelism"          = 0
                "max full-text crawl range"          = 4
                "max server memory (MB)"             = 2147483647
                "max text repl size (B)"             = 65536
                "max worker threads"                 = 0
                "media retention"                    = 0
                "min memory per query (KB)"          = 1024
                "min server memory (MB)"             = 8
                "nested triggers"                    = 1
                "network packet size (B)"            = 4096
                "Ole Automation Procedures"          = 0
                "open objects"                       = 0
                "PH timeout (s)"                     = 60
                "precompute rank"                    = 0
                "priority boost"                     = 0
                "query governor cost limit"          = 0
                "query wait (s)"                     = -1
                "recovery interval (min)"            = 0
                "remote access"                      = 1
                "remote admin connections"           = 0
                "remote login timeout (s)"           = 20
                "remote proc trans"                  = 0
                "remote query timeout (s)"           = 600
                "Replication XPs"                    = 0
                "scan for startup procs"             = 0
                "server trigger recursion"           = 1
                "set working set size"               = 0
                "show advanced options"              = 0
                "SMO and DMO XPs"                    = 1
                "SQL Mail XPs"                       = 0
                "transform noise words"              = 0
                "two digit year cutoff"              = 2049
                "user connections"                   = 0
                "User Instance Timeout"              = 60
                "user instances enabled"             = 0
                "user options"                       = 0
                "Web Assistant Procedures"           = 0
                "xp_cmdshell"                        = 0
            }
        }

        #endregion SQL2005

        #region SQL2008&2008R2
        10 {
            [pscustomobject]@{
                "access check cache bucket count"    = 0
                "access check cache quota"           = 0
                "Ad Hoc Distributed Queries"         = 0
                "affinity I/O mask"                  = 0
                "affinity64 I/O mask"                = 0
                "affinity mask"                      = 0
                "affinity64 mask"                    = 0
                "Agent XPs"                          = 0
                "allow updates"                      = 0
                "awe enabled"                        = 0
                "backup compression default"         = 0
                "blocked process threshold (s)"      = 0
                "c2 audit mode"                      = 0
                "clr enabled"                        = 0
                "common criteria compliance enabled" = 0
                "cost threshold for parallelism"     = 5
                "cross db ownership chaining"        = 0
                "cursor threshold"                   = -1
                "Database Mail XPs"                  = 0
                "default full-text language"         = 1033
                "default language"                   = 0
                "default trace enabled"              = 1
                "disallow results from triggers"     = 0
                "EKM provider enabled"               = 0
                "filestream access level"            = 0
                "fill factor (%)"                    = 0
                "ft crawl bandwidth (max)"           = 100
                "ft crawl bandwidth (min)"           = 0
                "ft notify bandwidth (max)"          = 100
                "ft notify bandwidth (min)"          = 0
                "index create memory (KB)"           = 0
                "in-doubt xact resolution"           = 0
                "lightweight pooling"                = 0
                "locks"                              = 0
                "max degree of parallelism"          = 0
                "max full-text crawl range"          = 4
                "max server memory (MB)"             = 2147483647
                "max text repl size (B)"             = 65536
                "max worker threads"                 = 0
                "media retention"                    = 0
                "min memory per query (KB)"          = 1024
                "min server memory (MB)"             = 0
                "nested triggers"                    = 1
                "network packet size (B)"            = 4096
                "Ole Automation Procedures"          = 0
                "open objects"                       = 0
                "optimize for ad hoc workloads"      = 0
                "PH timeout (s)"                     = 60
                "precompute rank"                    = 0
                "priority boost"                     = 0
                "query governor cost limit"          = 0
                "query wait (s)"                     = -1
                "recovery interval (min)"            = 0
                "remote access"                      = 1
                "remote admin connections"           = 0
                "remote login timeout (s)"           = 20
                "remote proc trans"                  = 0
                "remote query timeout (s)"           = 600
                "Replication XPs"                    = 0
                "scan for startup procs"             = 0
                "server trigger recursion"           = 1
                "set working set size"               = 0
                "show advanced options"              = 0
                "SMO and DMO XPs"                    = 1
                "SQL Mail XPs"                       = 0
                "transform noise words"              = 0
                "two digit year cutoff"              = 2049
                "user connections"                   = 0
                "User Instance Timeout"              = 60
                "user instances enabled"             = 0
                "user options"                       = 0
                "xp_cmdshell"                        = 0
            }
        }
        #endregion SQL2008&2008R2

        #region SQL2012
        11 {
            [pscustomobject]@{
                "access check cache bucket count"    = 0
                "access check cache quota"           = 0
                "Ad Hoc Distributed Queries"         = 0
                "affinity I/O mask"                  = 0
                "affinity64 I/O mask"                = 0
                "affinity mask"                      = 0
                "affinity64 mask"                    = 0
                "Agent XPs"                          = 0
                "allow updates"                      = 0
                "backup compression default"         = 0
                "blocked process threshold (s)"      = 0
                "c2 audit mode"                      = 0
                "clr enabled"                        = 0
                "common criteria compliance enabled" = 0
                "contained database authentication"  = 0
                "cost threshold for parallelism"     = 5
                "cross db ownership chaining"        = 0
                "cursor threshold"                   = -1
                "Database Mail XPs"                  = 0
                "default full-text language"         = 1033
                "default language"                   = 0
                "default trace enabled"              = 1
                "disallow results from triggers"     = 0
                "EKM provider enabled"               = 0
                "filestream access level"            = 0
                "fill factor (%)"                    = 0
                "ft crawl bandwidth (max)"           = 100
                "ft crawl bandwidth (min)"           = 0
                "ft notify bandwidth (max)"          = 100
                "ft notify bandwidth (min)"          = 0
                "index create memory (KB)"           = 0
                "in-doubt xact resolution"           = 0
                "lightweight pooling"                = 0
                "locks"                              = 0
                "max degree of parallelism"          = 0
                "max full-text crawl range"          = 4
                "max server memory (MB)"             = 2147483647
                "max text repl size (B)"             = 65536
                "max worker threads"                 = 0
                "media retention"                    = 0
                "min memory per query (KB)"          = 1024
                "min server memory (MB)"             = 0
                "nested triggers"                    = 1
                "network packet size (B)"            = 4096
                "Ole Automation Procedures"          = 0
                "open objects"                       = 0
                "optimize for ad hoc workloads"      = 0
                "PH timeout (s)"                     = 60
                "precompute rank"                    = 0
                "priority boost"                     = 0
                "query governor cost limit"          = 0
                "query wait (s)"                     = -1
                "recovery interval (min)"            = 0
                "remote access"                      = 1
                "remote admin connections"           = 0
                "remote login timeout (s)"           = 10
                "remote proc trans"                  = 0
                "remote query timeout (s)"           = 600
                "Replication XPs"                    = 0
                "scan for startup procs"             = 0
                "server trigger recursion"           = 1
                "set working set size"               = 0
                "show advanced options"              = 0
                "SMO and DMO XPs"                    = 1
                "transform noise words"              = 0
                "two digit year cutoff"              = 2049
                "user connections"                   = 0
                "User Instance Timeout"              = 60
                "user instances enabled"             = 0
                "user options"                       = 0
                "xp_cmdshell"                        = 0
            }
        }
        #endregion SQL2012

        #region SQL2014
        12 {
            [pscustomobject]@{
                "access check cache bucket count"    = 0
                "access check cache quota"           = 0
                "Ad Hoc Distributed Queries"         = 0
                "affinity I/O mask"                  = 0
                "affinity64 I/O mask"                = 0
                "affinity mask"                      = 0
                "affinity64 mask"                    = 0
                "Agent XPs"                          = 0
                "allow updates"                      = 0
                "backup checksum default"            = 0
                "backup compression default"         = 0
                "blocked process threshold (s)"      = 0
                "c2 audit mode"                      = 0
                "clr enabled"                        = 0
                "common criteria compliance enabled" = 0
                "contained database authentication"  = 0
                "cost threshold for parallelism"     = 5
                "cross db ownership chaining"        = 0
                "cursor threshold"                   = -1
                "Database Mail XPs"                  = 0
                "default full-text language"         = 1033
                "default language"                   = 0
                "default trace enabled"              = 1
                "disallow results from triggers"     = 0
                "EKM provider enabled"               = 0
                "filestream access level"            = 0
                "fill factor (%)"                    = 0
                "ft crawl bandwidth (max)"           = 100
                "ft crawl bandwidth (min)"           = 0
                "ft notify bandwidth (max)"          = 100
                "ft notify bandwidth (min)"          = 0
                "index create memory (KB)"           = 0
                "in-doubt xact resolution"           = 0
                "lightweight pooling"                = 0
                "locks"                              = 0
                "max degree of parallelism"          = 0
                "max full-text crawl range"          = 4
                "max server memory (MB)"             = 2147483647
                "max text repl size (B)"             = 65536
                "max worker threads"                 = 0
                "media retention"                    = 0
                "min memory per query (KB)"          = 1024
                "min server memory (MB)"             = 0
                "nested triggers"                    = 1
                "network packet size (B)"            = 4096
                "Ole Automation Procedures"          = 0
                "open objects"                       = 0
                "optimize for ad hoc workloads"      = 0
                "PH timeout (s)"                     = 60
                "precompute rank"                    = 0
                "priority boost"                     = 0
                "query governor cost limit"          = 0
                "query wait (s)"                     = -1
                "recovery interval (min)"            = 0
                "remote access"                      = 1
                "remote admin connections"           = 0
                "remote login timeout (s)"           = 10
                "remote proc trans"                  = 0
                "remote query timeout (s)"           = 600
                "Replication XPs"                    = 0
                "scan for startup procs"             = 0
                "server trigger recursion"           = 1
                "set working set size"               = 0
                "show advanced options"              = 0
                "SMO and DMO XPs"                    = 1
                "transform noise words"              = 0
                "two digit year cutoff"              = 2049
                "user connections"                   = 0
                "User Instance Timeout"              = 60
                "user instances enabled"             = 0
                "user options"                       = 0
                "xp_cmdshell"                        = 0
            }
        }
        #endregion SQL2014

        #region SQL2016
        13 {
            [pscustomobject]@{
                "access check cache bucket count"    = 0
                "access check cache quota"           = 0
                "Ad Hoc Distributed Queries"         = 0
                "affinity I/O mask"                  = 0
                "affinity64 I/O mask"                = 0
                "affinity mask"                      = 0
                "affinity64 mask"                    = 0
                "Agent XPs"                          = 0
                "allow polybase export"              = 0
                "allow updates"                      = 0
                "automatic soft-NUMA disabled"       = 0
                "backup checksum default"            = 0
                "backup compression default"         = 0
                "blocked process threshold (s)"      = 0
                "c2 audit mode"                      = 0
                "clr enabled"                        = 0
                "common criteria compliance enabled" = 0
                "contained database authentication"  = 0
                "cost threshold for parallelism"     = 5
                "cross db ownership chaining"        = 0
                "cursor threshold"                   = -1
                "Database Mail XPs"                  = 0
                "default full-text language"         = 1033
                "default language"                   = 0
                "default trace enabled"              = 1
                "disallow results from triggers"     = 0
                "EKM provider enabled"               = 0
                "external scripts enabled"           = 0
                "filestream access level"            = 0
                "fill factor (%)"                    = 0
                "ft crawl bandwidth (max)"           = 100
                "ft crawl bandwidth (min)"           = 0
                "ft notify bandwidth (max)"          = 100
                "ft notify bandwidth (min)"          = 0
                "hadoop connectivity"                = 0
                "index create memory (KB)"           = 0
                "in-doubt xact resolution"           = 0
                "lightweight pooling"                = 0
                "locks"                              = 0
                "max degree of parallelism"          = 0
                "max full-text crawl range"          = 4
                "max server memory (MB)"             = 2147483647
                "max text repl size (B)"             = 65536
                "max worker threads"                 = 0
                "media retention"                    = 0
                "min memory per query (KB)"          = 1024
                "min server memory (MB)"             = 0
                "nested triggers"                    = 1
                "network packet size (B)"            = 4096
                "Ole Automation Procedures"          = 0
                "open objects"                       = 0
                "optimize for ad hoc workloads"      = 0
                "PH timeout (s)"                     = 60
                "polybase network encryption"        = 1
                "precompute rank"                    = 0
                "priority boost"                     = 0
                "query governor cost limit"          = 0
                "query wait (s)"                     = -1
                "recovery interval (min)"            = 0
                "remote access"                      = 1
                "remote admin connections"           = 0
                "remote data archive"                = 0
                "remote login timeout (s)"           = 10
                "remote proc trans"                  = 0
                "remote query timeout (s)"           = 600
                "Replication XPs"                    = 0
                "scan for startup procs"             = 0
                "server trigger recursion"           = 1
                "set working set size"               = 0
                "show advanced options"              = 0
                "SMO and DMO XPs"                    = 1
                "transform noise words"              = 0
                "two digit year cutoff"              = 2049
                "user connections"                   = 0
                "User Instance Timeout"              = 60
                "user instances enabled"             = 0
                "user options"                       = 0
                "xp_cmdshell"                        = 0
            }
        }
        #endregion SQL2016

        #region SQL2017
        14 {
            [pscustomobject]@{
                "access check cache bucket count"    = 0
                "access check cache quota"           = 0
                "Ad Hoc Distributed Queries"         = 0
                "affinity I/O mask"                  = 0
                "affinity mask"                      = 0
                "affinity64 I/O mask"                = 0
                "affinity64 mask"                    = 0
                "Agent XPs"                          = 0
                "allow polybase export"              = 0
                "allow updates"                      = 0
                "automatic soft-NUMA disabled"       = 0
                "backup checksum default"            = 0
                "backup compression default"         = 0
                "blocked process threshold (s)"      = 0
                "c2 audit mode"                      = 0
                "clr enabled"                        = 0
                "clr strict security"                = 1
                "common criteria compliance enabled" = 0
                "contained database authentication"  = 0
                "cost threshold for parallelism"     = 5
                "cross db ownership chaining"        = 0
                "cursor threshold"                   = -1
                "Database Mail XPs"                  = 0
                "default full-text language"         = 1033
                "default language"                   = 0
                "default trace enabled"              = 1
                "disallow results from triggers"     = 0
                "EKM provider enabled"               = 0
                "external scripts enabled"           = 0
                "filestream access level"            = 0
                "fill factor (%)"                    = 0
                "ft crawl bandwidth (max)"           = 100
                "ft crawl bandwidth (min)"           = 0
                "ft notify bandwidth (max)"          = 100
                "ft notify bandwidth (min)"          = 0
                "hadoop connectivity"                = 0
                "index create memory (KB)"           = 0
                "in-doubt xact resolution"           = 0
                "lightweight pooling"                = 0
                "locks"                              = 0
                "max degree of parallelism"          = 0
                "max full-text crawl range"          = 4
                "max server memory (MB)"             = 2147483647
                "max text repl size (B)"             = 65536
                "max worker threads"                 = 0
                "media retention"                    = 0
                "min memory per query (KB)"          = 1024
                "min server memory (MB)"             = 0
                "nested triggers"                    = 1
                "network packet size (B)"            = 4096
                "Ole Automation Procedures"          = 0
                "open objects"                       = 0
                "optimize for ad hoc workloads"      = 0
                "PH timeout (s)"                     = 60
                "polybase network encryption"        = 1
                "precompute rank"                    = 0
                "priority boost"                     = 0
                "query governor cost limit"          = 0
                "query wait (s)"                     = -1
                "recovery interval (min)"            = 0
                "remote access"                      = 1
                "remote admin connections"           = 0
                "remote data archive"                = 0
                "remote login timeout (s)"           = 10
                "remote proc trans"                  = 0
                "remote query timeout (s)"           = 600
                "Replication XPs"                    = 0
                "scan for startup procs"             = 0
                "server trigger recursion"           = 1
                "set working set size"               = 0
                "show advanced options"              = 0
                "SMO and DMO XPs"                    = 1
                "transform noise words"              = 0
                "two digit year cutoff"              = 2049
                "user connections"                   = 0
                "User Instance Timeout"              = 60
                "user instances enabled"             = 0
                "user options"                       = 0
                "xp_cmdshell"                        = 0

            }
        }
        #endregion SQL2017


    }

}

tools\dbatools\internal\functions\New-DbaLogShippingSecondaryPrimary.ps1

function New-DbaLogShippingSecondaryPrimary {
    <#
        .SYNOPSIS
            New-DbaLogShippingPrimarySecondary sets up the primary information for the primary database.

        .DESCRIPTION
            New-DbaLogShippingPrimarySecondary sets up the primary information, adds local and remote monitor links,
            and creates copy and restore jobs for the specified primary database.
            This is executed on the secondary server.

        .PARAMETER SqlInstance
            SQL Server instance. You must have sysadmin access and server version must be SQL Server version 2000 or greater.

        .PARAMETER SqlCredential
            Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

        .PARAMETER BackupSourceDirectory
            The directory where transaction log backup files from the primary server are stored.

        .PARAMETER BackupDestinationDirectory
            The directory on the secondary server where backup files are copied to.

        .PARAMETER CopyJob
            The name to use for the SQL Server Agent job being created to copy transaction log backups to the secondary server.

        .PARAMETER CopyJobID
            The UID associated with the copy job on the secondary server.

        .PARAMETER FileRetentionPeriod
            The length of time, in minutes, that a backup file is retained on the secondary server in the path specified by the BackupDestinationDirectory parameter before being deleted.
            The default is 14420.

        .PARAMETER MonitorServer
            Is the name of the monitor server. The default is the secondary server.

        .PARAMETER MonitorServerLogin
            Is the username of the account used to access the monitor server.

        .PARAMETER MonitorServerPassword
            Is the password of the account used to access the monitor server.

        .PARAMETER MonitorServerSecurityMode
            The security mode used to connect to the monitor server. Allowed values are 0, "sqlserver", 1, "windows"
            The default is 1 or Windows.

        .PARAMETER PrimaryServer
            The name of the primary instance of the Microsoft SQL Server Database Engine in the log shipping configuration.

        .PARAMETER PrimaryDatabase
            Is the name of the database on the primary server.

        .PARAMETER RestoreJob
            Is the name of the SQL Server Agent job on the secondary server that restores the backups to the secondary database.

        .PARAMETER RestoreJobID
            The UID associated with the restore job on the secondary server.

        .PARAMETER WhatIf
            Shows what would happen if the command were to run. No actions are actually performed.

        .PARAMETER Confirm
            Prompts you for confirmation before executing any changing operations within the command.

        .PARAMETER EnableException
            By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
            This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
            Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

        .PARAMETER Force
            The force parameter will ignore some errors in the parameters and assume defaults.
            It will also remove the any present schedules with the same name for the specific job.

        .NOTES
            Author: Sander Stad (@sqlstad, sqlstad.nl)
            Website: https://dbatools.io
            Copyright: (c) 2018 by dbatools, licensed under MIT
            License: MIT https://opensource.org/licenses/MIT

        .LINK
            https://dbatools.io/New-DbaLogShippingPrimarySecondary

        .EXAMPLE
            New-DbaLogShippingSecondaryPrimary -SqlInstance sql2 -BackupSourceDirectory "\\sql1\logshipping\DB1" -BackupDestinationDirectory D:\Data\logshippingdestination\DB1_DR -CopyJob LSCopy_sql2_DB1_DR -FileRetentionPeriod 4320 -MonitorServer sql2 -MonitorServerSecurityMode 'Windows' -PrimaryServer sql1 -PrimaryDatabase DB1 -RestoreJob LSRestore_sql2_DB1_DR
    #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "Low")]
    param (
        [parameter(Mandatory)]
        [Alias("ServerInstance", "SqlServer")]
        [object]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [string]$BackupSourceDirectory,
        [string]$BackupDestinationDirectory,
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [string]$CopyJob,
        [int]$FileRetentionPeriod = 14420,
        [string]$MonitorServer,
        [PSCredential]$MonitorCredential,
        [Parameter(Mandatory)]
        [ValidateSet(0, "sqlserver", 1, "windows")]
        [object]$MonitorServerSecurityMode = 1,
        [object]$PrimaryServer,
        [PSCredential]$PrimarySqlCredential,
        [object]$PrimaryDatabase,
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [string]$RestoreJob,
        [Alias('Silent')]
        [switch]$EnableException,
        [switch]$Force
    )

    # Try connecting to the instance
    try {
        $ServerSecondary = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential
    } catch {
        Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $SqlInstance -Continue
    }

    # Try connecting to the instance
    try {
        $ServerPrimary = Connect-SqlInstance -SqlInstance $PrimaryServer -SqlCredential $PrimarySqlCredential
    } catch {
        Stop-Function -Message "Failure" -Category ConnectionError -ErrorRecord $_ -Target $PrimaryServer -Continue
    }

    # Check if the backup UNC path is correct and reachable
    if ([bool]([uri]$BackupDestinationDirectory).IsUnc -and $BackupDestinationDirectory -notmatch '^\\(?:\\[^<>:`"/\\|?*]+)+$') {
        Stop-Function -Message "The backup destination path should be formatted in the form \\server\share." -Target $SqlInstance
        return
    } else {
        if (-not ((Test-Path $BackupDestinationDirectory -PathType Container -IsValid) -and ((Get-Item $BackupDestinationDirectory).PSProvider.Name -eq 'FileSystem'))) {
            Stop-Function -Message "The backup destination path is not valid or can't be reached." -Target $SqlInstance
            return
        }
    }

    # Check the MonitorServer
    if (-not $MonitorServer -and $Force) {
        $MonitorServer = $SqlInstance
        Write-Message -Message "Setting monitor server to $MonitorServer." -Level Verbose
    }

    # Check of the MonitorServerSecurityMode value is of type string and set the integer value
    if ($MonitorServerSecurityMode -notin 0, 1) {
        $MonitorServerSecurityMode = switch ($MonitorServerSecurityMode) {"WINDOWS" { 1 } "SQLSERVER" { 0 } }
        Write-Message -Message "Setting monitor server security mode to $MonitorServerSecurityMode." -Level Verbose
    }

    # Check the MonitorServerSecurityMode if it's SQL Server authentication
    if ($MonitorServerSecurityMode -eq 0 -and -not $MonitorCredential) {
        Stop-Function -Message "The MonitorServerCredential cannot be empty when using SQL Server authentication." -Target $SqlInstance -Continue
        return
    } elseif ($MonitorServerSecurityMode -eq 0 -and $MonitorCredential) {
        # Get the username and password from the credential
        $MonitorLogin = $MonitorCredential.UserName
        $MonitorPassword = $MonitorCredential.GetNetworkCredential().Password

        # Check if the user is in the database
        if ($ServerSecondary.Databases['master'].Users.Name -notcontains $MonitorLogin) {
            Stop-Function -Message "User $MonitorLogin for monitor login must be in the master database." -Target $SqlInstance -Continue
            return
        }
    }

    # Check if the database is present on the primary sql server
    if ($ServerPrimary.Databases.Name -notcontains $PrimaryDatabase) {
        Stop-Function -Message "Database $PrimaryDatabase is not available on instance $PrimaryServer" -Target $PrimaryServer -Continue
        return
    }

    # Set up the query
    $Query = "
        DECLARE @LS_Secondary__CopyJobId AS uniqueidentifier
        DECLARE @LS_Secondary__RestoreJobId	AS uniqueidentifier
        DECLARE @LS_Secondary__SecondaryId AS uniqueidentifier
        EXEC master.sys.sp_add_log_shipping_secondary_primary
                @primary_server = N'$PrimaryServer'
                ,@primary_database = N'$PrimaryDatabase'
                ,@backup_source_directory = N'$BackupSourceDirectory'
                ,@backup_destination_directory = N'$BackupDestinationDirectory'
                ,@copy_job_name = N'$CopyJob'
                ,@restore_job_name = N'$RestoreJob'
                ,@file_retention_period = $FileRetentionPeriod
                ,@copy_job_id = @LS_Secondary__CopyJobId OUTPUT
                ,@restore_job_id = @LS_Secondary__RestoreJobId OUTPUT
                ,@secondary_id = @LS_Secondary__SecondaryId OUTPUT "

    if ($MonitorServer) {
        $Query += ",@monitor_server = N'$MonitorServer'
                ,@monitor_server_security_mode = $($MonitorServerSecurityMode) "
    }


    # Check the MonitorServerSecurityMode if it's SQL Server authentication
    if ($MonitorServerSecurityMode -eq 0 -and $MonitorServer) {
        $Query += ",@monitor_server_login = N'$MonitorLogin'
            ,@monitor_server_password = N'$MonitorPassword' "
    }

    if ($ServerSecondary.Version.Major -gt 9) {
        $Query += ",@overwrite = 1;"
    } else {
        $Query += ";"
    }

    # Execute the query to add the log shipping primary
    if ($PSCmdlet.ShouldProcess($SqlServer, ("Configuring logshipping making settings for the primary database to secondary database on $SqlInstance"))) {
        try {
            Write-Message -Message "Configuring logshipping making settings for the primary database." -Level Verbose
            Write-Message -Message "Executing query:`n$Query" -Level Verbose
            $ServerSecondary.Query($Query)
        } catch {
            Write-Message -Message "$($_.Exception.InnerException.InnerException.InnerException.InnerException.Message)" -Level Warning
            Stop-Function -Message "Error executing the query.`n$($_.Exception.Message)"  -ErrorRecord $_ -Target $SqlInstance -Continue
        }
    }

    Write-Message -Message "Finished configuring of secondary database to primary database $PrimaryDatabase." -Level Verbose
}

tools\dbatools\internal\functions\Register-RemoteSessionConfiguration.ps1

function Register-RemoteSessionConfiguration {
    <#
    .SYNOPSIS
        Registers a PSSessionConfiguration on a remote machine
    .DESCRIPTION
        Registers a session with a custom credentials on a remote machine through WinRM.
        Designed to overcome the double-hop issue and as an alternative to CredSSP protocol.
    #>
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSAvoidUsingConvertToSecureStringWithPlainText", "")]
    [CmdletBinding()]
    Param (
        [Parameter(Mandatory)]
        $ComputerName,
        [ValidateNotNullOrEmpty()]
        [string]$Name = "dbatools_remotesession",
        [Parameter(Mandatory)]
        [pscredential]$Credential,
        [pscredential]$RunAsCredential = $Credential
    )
    begin {

    }
    process {
        $createRunasSession = {
            Param (
                $Name,
                $user,
                $pwd
            )
            $output = [pscustomobject]@{ 'Name' = $Name; 'Status' = $null ; Successful = $false }
            if ($PSVersionTable.PSVersion -le '2.0') {
                $output.Status = "Current version of Powershell $($PSVersionTable.PSVersion) does not support SessionConfiguration with custom credentials. Minimum requirement is 3.0"
                return $output
            }
            $credential = New-Object System.Management.Automation.PSCredential @($user, (ConvertTo-SecureString -Force -AsPlainText $pwd))
            try {
                $existing = Get-PSSessionConfiguration -Name $Name -ErrorAction Stop 2>$null
            } catch {
                $null = 1
            }
            try {
                if ($null -eq $existing) {
                    $null = Register-PSSessionConfiguration -Name $Name -RunAsCredential $credential -Force -ErrorAction Stop -NoServiceRestart 3>$null
                    $output.Status = 'Created'
                    $output.Successful = $true
                    return $output
                } else {
                    Set-PSSessionConfiguration -Name $Name -RunAsCredential $credential -Force -ErrorAction Stop -NoServiceRestart 3>$null
                    $output.Status = 'Updated'
                    $output.Successful = $true
                    return $output
                }
            } catch {
                $output.Status = "Failed`: $($_.Exception.Message)"
                return $output
            }
        }
        try {
            $registerIt = Invoke-Command2 -ComputerName $ComputerName -Credential $Credential -ScriptBlock $createRunasSession -ArgumentList @(
                $Name,
                $RunAsCredential.UserName,
                $RunAsCredential.GetNetworkCredential().Password
            ) -Raw
        } catch {
            Stop-Function -Message "Failure during remote session configuration execution" -ErrorRecord $_ -EnableException $true
        }
        if ($registerIt) {
            Write-Message -Level Debug -Message "Configuration attempt returned the following status`: $($registerIt.Status)"
            if ($registerIt.Status -in 'Updated', 'Created') {
                Write-Message -Level Verbose -Message "Restarting WinRm service on $ComputerName"
                Restart-WinRMService -ComputerName $ComputerName -Credential $Credential
            }
            return $registerIt
        }
    }
}

tools\dbatools\internal\functions\Remove-InvalidFileNameChars.ps1

Function Remove-InvalidFileNameChars {
    param(
        [Parameter(Mandatory = $true,
            Position = 0,
            ValueFromPipeline = $true,
            ValueFromPipelineByPropertyName = $true)]
        [String]$Name
    )

    $invalidChars = [IO.Path]::GetInvalidFileNameChars() -join ''
    $re = "[{0}]" -f [RegEx]::Escape($invalidChars)
    return ($Name -replace $re)
}

tools\dbatools\internal\functions\Resolve-IpAddress.ps1

function Resolve-IpAddress {
    # Uses the Beard's method to resolve IPs
    [CmdletBinding()]
    param (
        [Parameter(Mandatory)]
        [Alias("ServerInstance", "SqlInstance", "ComputerName", "SqlServer")]
        [object]$Server
    )

    if ($Server.GetType() -eq [Microsoft.SqlServer.Management.Smo.Server]) {
        return $ipaddress = ((Test-Connection $Server.ComputerName -Count 1 -ErrorAction SilentlyContinue).Ipv4Address).IPAddressToString
    } else {
        return $ipaddress = ((Test-Connection $server.Split('\')[0] -Count 1 -ErrorAction SilentlyContinue).Ipv4Address).IPAddressToString
    }
}

tools\dbatools\internal\functions\Resolve-NetBiosName.ps1

function Resolve-NetBiosName {
    <#
.SYNOPSIS
Internal function. Takes a best guess at the NetBIOS name of a server.
    #>
    [CmdletBinding()]
    param (
        [Parameter(Mandatory)]
        [Alias("ServerInstance", "SqlServer")]
        [object]$SqlInstance,
        [PSCredential]$SqlCredential
    )
    $server = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential
    $server.ComputerName
}

tools\dbatools\internal\functions\Resolve-SqlIpAddress.ps1

function Resolve-SqlIpAddress {
    [CmdletBinding()]
    param (
        [Parameter(Mandatory)]
        [Alias("ServerInstance", "SqlServer")]
        [object]$SqlInstance,
        [PSCredential]$SqlCredential
    )

    $server = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential
    $servernetbios = $server.ComputerNamePhysicalNetBIOS
    $ipaddr = (Test-Connection $servernetbios -count 1).Ipv4Address
    return $ipaddr
}

tools\dbatools\internal\functions\Restart-WinRMService.ps1

function Restart-WinRMService {
    <#
    .SYNOPSIS
        Restarts WinRM service on a remote machine and waits for it to get back up
    .DESCRIPTION
        Restarts WinRM service on a remote machine and waits for it to get back up by attempting to establish a WinRM session.
    #>

    [CmdletBinding(SupportsShouldProcess)]
    Param (
        [Parameter(Mandatory)]
        $ComputerName,
        [pscredential]$Credential,
        [int]$Timeout = 30
    )
    begin {

    }
    process {
        if ($PSCmdlet.ShouldProcess($ComputerName, "Restarting WinRm service")) {
            $restartService = {
                $null = Get-Service -Name WinRM -ErrorAction Stop | Restart-Service -ErrorAction Stop
            }
            try {
                $null = Invoke-Command2 -ComputerName $ComputerName -Credential $Credential -ScriptBlock $restartService -Raw -ErrorAction Stop
            } catch [System.Management.Automation.Remoting.PSRemotingTransportException] {
                Write-Message -Level Debug "Expected exception - the pipe was disconnected | $($_.Exception.Message)"
            } catch {
                Write-Message -Level Warning "Failed to restart WinRM service on $ComputerName"
            }
            Write-Message -Level Debug "Removing existing local sessions to $ComputerName - they are no longer valid"
            $runspaceId = [System.Management.Automation.Runspaces.Runspace]::DefaultRunspace.InstanceId
            # Retrieve a session from the session cache, if available (it's unique per runspace)
            $currentSessions = [Sqlcollaborative.Dbatools.Connection.ConnectionHost]::PSSessionGet($runspaceId, $ComputerName)
            $currentSessions | Remove-PSSession
            Write-Message -Level Debug "Waiting for the WinRM service to restart on $ComputerName"
            $waitCounter = 0
            while ($waitCounter -lt $Timeout * 5) {
                try {
                    $available = Invoke-Command2 -ComputerName $ComputerName -Credential $Credential -ScriptBlock { $true } -Raw -ErrorAction Stop
                } catch {
                    Write-Message -Level Debug -Message "Still waiting for the WinRM service to restart on $ComputerName"
                }
                if ($available) { break }
                Start-Sleep -Milliseconds 200
                $waitCounter++
            }
        }
    }
}

tools\dbatools\internal\functions\runspaces\Get-DbaRunspace.ps1

function Get-DbaRunspace {
    <#
    .SYNOPSIS
        Returns registered runspaces.

    .DESCRIPTION
        Returns a list of runspaces that have been registered with dbatools

    .PARAMETER Name
        Default: "*"
        Only registered runspaces of similar names are returned.

    .EXAMPLE
        PS C:\> Get-DbaRunspace

        Returns all registered runspaces

    .EXAMPLE
        PS C:\> Get-DbaRunspace -Name 'mymodule.maintenance'

        Returns the runspace registered under the name 'mymodule.maintenance'
    #>
    [CmdletBinding()]
    param (
        [string]
        $Name = "*"
    )

    [Sqlcollaborative.Dbatools.Runspace.RunspaceHost]::Runspaces.Values | Where-Object Name -Like $Name
}

tools\dbatools\internal\functions\runspaces\Register-DbaMaintenanceTask.ps1

function Register-DbaMaintenanceTask {
    <#
        .SYNOPSIS
            Allows scheduling maintenance tasks, that are perfomed in the background.

        .DESCRIPTION
            Allows scheduling maintenance tasks, that are perfomed in the background.

            All scriptblocks scheduled like this will be performed on a separate runspace and have access to all internal dbatools commands.
            None of the scriptblocks will affect the main session (so you cannot manipulate variables, etc.)

        .PARAMETER Name
            The name of the task.
            Must be unique, otherwise it will update the existing task.

        .PARAMETER ScriptBlock
            The task/scriptblock that should be performed as part of the maintenance.
            It will have all of dbatools including internal commands available.

        .PARAMETER Once
            Whether the interval should be performed only once.

        .PARAMETER Interval
            The interval at which the task should be repeated.

        .PARAMETER Delay
            How far after the initial registration should the maintenance script wait before processing this.
            This can be used to delay background stuff that should not content with items that would be good to have as part of the module import.
            Some library specific items can be moved to maintenance if their processing would take too much time on original import, even if it is desirable to have them available as soon as possible.

        .PARAMETER Priority
            How important is this task?
            If multiple tasks are due at the same maintenance cycle, the more critical one will be processed first.

        .PARAMETER EnableException
            By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
            This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
            Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

        .EXAMPLE
            PS C:\> Register-DbaMaintenanceTask -Name 'value1' -ScriptBlock $ScriptBlock -Once
       #>

    [CmdletBinding()]
    param (
        [Parameter(Mandatory)]
        [string]
        $Name,

        [Parameter(Mandatory)]
        [System.Management.Automation.ScriptBlock]
        $ScriptBlock,

        [Parameter(Mandatory, ParameterSetName = "Once")]
        [switch]
        $Once,

        [Parameter(Mandatory, ParameterSetName = "Repeating")]
        [System.TimeSpan]
        $Interval,

        [System.TimeSpan]
        $Delay,

        [Sqlcollaborative.Dbatools.Maintenance.MaintenancePriority]
        $Priority = "Medium",

        [switch]
        [Alias('Silent')]$EnableException
    )

    #region Case: Task already registered
    if ([Sqlcollaborative.Dbatools.Maintenance.MaintenanceHost]::Tasks.ContainsKey($Name.ToLower())) {
        $task = [Sqlcollaborative.Dbatools.Maintenance.MaintenanceHost]::Tasks[$Name.ToLower()]
        if ($task.ScriptBlock -ne $ScriptBlock) { $task.ScriptBlock = $ScriptBlock }
        if (Test-Bound -ParameterName Once) { $task.Once = $Once }
        if (Test-Bound -ParameterName Interval) {
            $task.Once = $false
            $task.Interval = $Interval
        }
        if (Test-Bound -ParameterName Delay) { $task.Delay = $Delay }
        if (Test-Bound -ParameterName Priority) { $task.Priority = $Priority }
    }
    #endregion Case: Task already registered

    #region New Task
    else {
        $task = New-Object Sqlcollaborative.Dbatools.Maintenance.MaintenanceTask
        $task.Name = $Name.ToLower()
        $task.ScriptBlock = $ScriptBlock
        if (Test-Bound -ParameterName Once) { $task.Once = $true }
        if (Test-Bound -ParameterName Interval) {
            if ($Interval.Ticks -le 0) {
                Stop-Function -Message "Failed to register task: $Name - Interval cannot be 0 or less" -Category InvalidArgument
                return
            } else { $task.Interval = $Interval }
        }
        if (Test-Bound -ParameterName Delay) { $task.Delay = $Delay }
        $task.Priority = $Priority
        $task.Registered = Get-Date
        [Sqlcollaborative.Dbatools.Maintenance.MaintenanceHost]::Tasks[$Name.ToLower()] = $task
    }
    #endregion New Task
}

tools\dbatools\internal\functions\Get-SqlFileStructure.ps1

function Get-SqlFileStructure {
    <#
    .SYNOPSIS
    Internal function. Returns custom object that contains file structures on destination paths (\\SqlInstance\m$\mssql\etc\etc\file.mdf) for
    source and destination servers.
    #>
    [CmdletBinding()]
    param (
        [Parameter(Mandatory, Position = 0)]
        [ValidateNotNullOrEmpty()]
        [object]$source,
        [Parameter(Mandatory, Position = 1)]
        [ValidateNotNullOrEmpty()]
        [object]$destination,
        [Parameter(Position = 2)]
        [bool]$ReuseSourceFolderStructure,
        [PSCredential]$SourceSqlCredential,
        [PSCredential]$DestinationSqlCredential
    )

    $sourceserver = Connect-SqlInstance -SqlInstance $Source -SqlCredential $SourceSqlCredential
    $source = $sourceserver.DomainInstanceName
    $destserver = Connect-SqlInstance -SqlInstance $Destination -SqlCredential $DestinationSqlCredential
    $destination = $destserver.DomainInstanceName

    $sourcenetbios = Resolve-NetBiosName $sourceserver
    $destnetbios = Resolve-NetBiosName $destserver

    $dbcollection = @{ };

    foreach ($db in $sourceserver.databases) {
        $dbstatus = $db.status.toString()
        if ($dbstatus.StartsWith("Normal") -eq $false) { continue }
        $destinationfiles = @{ }; $sourcefiles = @{ }

        # Data Files
        foreach ($filegroup in $db.filegroups) {
            foreach ($file in $filegroup.files) {
                # Destination File Structure
                $d = @{ }
                if ($ReuseSourceFolderStructure) {
                    $d.physical = $file.filename
                } else {
                    $directory = Get-SqlDefaultPaths $destserver data
                    $filename = Split-Path $($file.filename) -leaf
                    $d.physical = "$directory\$filename"
                }
                $d.logical = $file.name
                $d.remotefilename = Join-AdminUnc $destnetbios $d.physical
                $destinationfiles.add($file.name, $d)

                # Source File Structure
                $s = @{ }
                $s.logical = $file.name
                $s.physical = $file.filename
                $s.remotefilename = Join-AdminUnc $sourcenetbios $s.physical
                $sourcefiles.add($file.name, $s)
            }
        }

        # Add support for Full Text Catalogs in SQL Server 2005 and below
        if ($sourceserver.VersionMajor -lt 10) {
            foreach ($ftc in $db.FullTextCatalogs) {
                # Destination File Structure
                $d = @{ }
                $pre = "sysft_"
                $name = $ftc.name
                $physical = $ftc.RootPath
                $logical = "$pre$name"
                if ($ReuseSourceFolderStructure) {
                    $d.physical = $physical
                } else {
                    $directory = Get-SqlDefaultPaths $destserver data
                    if ($destserver.VersionMajor -lt 10) { $directory = "$directory\FTDATA" }
                    $filename = Split-Path($physical) -leaf
                    $d.physical = "$directory\$filename"
                }
                $d.logical = $logical
                $d.remotefilename = Join-AdminUnc $destnetbios $d.physical
                $destinationfiles.add($logical, $d)

                # Source File Structure
                $s = @{ }
                $pre = "sysft_"
                $name = $ftc.name
                $physical = $ftc.RootPath
                $logical = "$pre$name"

                $s.logical = $logical
                $s.physical = $physical
                $s.remotefilename = Join-AdminUnc $sourcenetbios $s.physical
                $sourcefiles.add($logical, $s)
            }
        }

        # Log Files
        foreach ($file in $db.logfiles) {
            $d = @{ }
            if ($ReuseSourceFolderStructure) {
                $d.physical = $file.filename
            } else {
                $directory = Get-SqlDefaultPaths $destserver log
                $filename = Split-Path $($file.filename) -leaf
                $d.physical = "$directory\$filename"
            }
            $d.logical = $file.name
            $d.remotefilename = Join-AdminUnc $destnetbios $d.physical
            $destinationfiles.add($file.name, $d)

            $s = @{ }
            $s.logical = $file.name
            $s.physical = $file.filename
            $s.remotefilename = Join-AdminUnc $sourcenetbios $s.physical
            $sourcefiles.add($file.name, $s)
        }

        $location = @{ }
        $location.add("Destination", $destinationfiles)
        $location.add("Source", $sourcefiles)
        $dbcollection.Add($($db.name), $location)
    }

    $filestructure = [pscustomobject]@{ "databases" = $dbcollection }
    return $filestructure
}

tools\dbatools\internal\functions\runspaces\Start-DbaRunspace.ps1

function Start-DbaRunspace {
    <#
    .SYNOPSIS
        Starts a managed runspace

    .DESCRIPTION
        Starts a runspace that was registered to dbatools
        Simply registering does not automatically start a given runspace. Only by executing this function will it take effect.

    .PARAMETER Name
        The name of the registered runspace to launch

    .PARAMETER Runspace
        The runspace to launch. Returned by Get-DbaRunspace

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .EXAMPLE
        PS C:\> Start-DbaRunspace -Name 'mymodule.maintenance'

        Starts the runspace registered under the name 'mymodule.maintenance'
    #>
    [CmdletBinding()]
    param (
        [Parameter(ValueFromPipeline)]
        [string[]]
        $Name,

        [Parameter(ValueFromPipeline)]
        [Sqlcollaborative.Dbatools.Runspace.RunspaceContainer[]]
        $Runspace,

        [switch]
        [Alias('Silent')]$EnableException
    )

    process {
        foreach ($item in $Name) {
            # Ignore all output from Get-DbaRunspace - it'll be handled by the second loop
            if ($item -eq "Sqlcollaborative.Dbatools.Runspace.runspacecontainer") { continue }

            if ([Sqlcollaborative.Dbatools.Runspace.RunspaceHost]::Runspaces.ContainsKey($item.ToLower())) {
                try {
                    Write-Message -Level Verbose -Message "Starting runspace: $($item.ToLower())" -Target $item.ToLower()
                    [Sqlcollaborative.Dbatools.Runspace.RunspaceHost]::Runspaces[$item.ToLower()].Start()
                } catch {
                    Stop-Function -Message "Failed to start runspace: $($item.ToLower())" -EnableException $EnableException -Target $item.ToLower() -Continue
                }
            } else {
                Stop-Function -Message "Failed to start runspace: $($item.ToLower()) | No runspace registered under this name!" -EnableException $EnableException -Category InvalidArgument -Tag "fail", "argument", "runspace", "start" -Target $item.ToLower() -Continue
            }
        }

        foreach ($item in $Runspace) {
            try {
                Write-Message -Level Verbose -Message "Starting runspace: $($item.Name.ToLower())" -Target $item
                $item.Start()
            } catch {
                Stop-Function -Message "Failed to start runspace: $($item.Name.ToLower())" -EnableException $EnableException -Target $item -Continue
            }
        }
    }
}

tools\dbatools\internal\functions\runspaces\Stop-DbaRunspace.ps1

function Stop-DbaRunspace {
    <#
    .SYNOPSIS
        Stops a managed runspace

    .DESCRIPTION
        Stops a runspace that was registered to dbatools.
        Will not cause errors if the runspace is already halted.

        Runspaces may not automatically terminate immediately when calling this function.
        Depending on the implementation of the scriptblock, this may in fact take a little time.
        If the scriptblock hasn't finished and terminated the runspace in a seemingly time, it will be killed by the system.
        This timeout is by default 30 seconds, but can be altered by using the Configuration System.
        For example, this line will increase the timeout to 60 seconds:
        Set-DbatoolsConfig Runspace.StopTimeout 60

    .PARAMETER Name
        The name of the registered runspace to stop

    .PARAMETER Runspace
        The runspace to stop. Returned by Get-DbaRunspace

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .EXAMPLE
        PS C:\> Stop-DbaRunspace -Name 'mymodule.maintenance'

        Stops the runspace registered under the name 'mymodule.maintenance'
    #>
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseShouldProcessForStateChangingFunctions", "")]
    [CmdletBinding()]
    param (
        [Parameter(ValueFromPipeline)]
        [string[]]
        $Name,

        [Parameter(ValueFromPipeline)]
        [Sqlcollaborative.Dbatools.Runspace.RunspaceContainer[]]
        $Runspace,

        [switch]
        [Alias('Silent')]$EnableException
    )

    process {
        foreach ($item in $Name) {
            # Ignore all output from Get-DbaRunspace - it'll be handled by the second loop
            if ($item -eq "Sqlcollaborative.Dbatools.Runspace.runspacecontainer") { continue }

            if ([Sqlcollaborative.Dbatools.Runspace.RunspaceHost]::Runspaces.ContainsKey($item.ToLower())) {
                try {
                    Write-Message -Level Verbose -Message "Stopping runspace: $($item.ToLower())" -Target $item.ToLower()
                    [Sqlcollaborative.Dbatools.Runspace.RunspaceHost]::Runspaces[$item.ToLower()].Stop()
                } catch {
                    Stop-Function -Message "Failed to stop runspace: $($item.ToLower())" -EnableException $EnableException -Target $item.ToLower() -Continue
                }
            } else {
                Stop-Function -Message "Failed to stop runspace: $($item.ToLower()) | No runspace registered under this name!" -EnableException $EnableException -Category InvalidArgument -Target $item.ToLower() -Continue
            }
        }

        foreach ($item in $Runspace) {
            try {
                Write-Message -Level Verbose -Message "Stopping runspace: $($item.Name.ToLower())" -Target $item
                $item.Stop()
            } catch {
                Stop-Function -Message "Failed to stop runspace: $($item.Name.ToLower())" -EnableException $EnableException -Target $item -Continue
            }
        }
    }
}

tools\dbatools\internal\functions\Select-DefaultView.ps1

function Select-DefaultView {
    <#

    This command enables us to send full on objects to the pipeline without the user seeing it

    See it in action in Get-DbaDbSnapshot and Remove-DbaDbSnapshot

    a lot of this is from boe, thanks boe!
    https://learn-powershell.net/2013/08/03/quick-hits-set-the-default-property-display-in-powershell-on-custom-objects/

    TypeName creates a new type so that we can use ps1xml to modify the output
       #>

    [CmdletBinding()]
    param (
        [parameter(ValueFromPipeline)]
        [object]
        $InputObject,

        [string[]]
        $Property,

        [string[]]
        $ExcludeProperty,

        [string]
        $TypeName
    )
    process {

        if ($null -eq $InputObject) { return }

        if ($TypeName) {
            $InputObject.PSObject.TypeNames.Insert(0, "dbatools.$TypeName")
        }

        if ($ExcludeProperty) {
            if ($InputObject.GetType().Name.ToString() -eq 'DataRow') {
                $ExcludeProperty += 'Item', 'RowError', 'RowState', 'Table', 'ItemArray', 'HasErrors'
            }

            $props = ($InputObject | Get-Member | Where-Object MemberType -in 'Property', 'NoteProperty', 'AliasProperty' | Where-Object { $_.Name -notin $ExcludeProperty }).Name
            $defaultset = New-Object System.Management.Automation.PSPropertySet('DefaultDisplayPropertySet', [string[]]$props)
        } else {
            # property needs to be string
            if ("$property" -like "* as *") {
                $newproperty = @()
                foreach ($p in $property) {
                    if ($p -like "* as *") {
                        $old, $new = $p -isplit " as "
                        # Do not be tempted to not pipe here
                        $inputobject | Add-Member -Force -MemberType AliasProperty -Name $new -Value $old -ErrorAction SilentlyContinue
                        $newproperty += $new
                    } else {
                        $newproperty += $p
                    }
                }
                $property = $newproperty
            }
            $defaultset = New-Object System.Management.Automation.PSPropertySet('DefaultDisplayPropertySet', [string[]]$Property)
        }

        $standardmembers = [System.Management.Automation.PSMemberInfo[]]@($defaultset)

        # Do not be tempted to not pipe here
        $inputobject | Add-Member -Force -MemberType MemberSet -Name PSStandardMembers -Value $standardmembers -ErrorAction SilentlyContinue

        $inputobject
    }
}

tools\dbatools\internal\functions\Set-ServiceStartMode.ps1

function Set-ServiceStartMode {
    <#
        .SYNOPSIS
        Internal function. Implements the method that changes startup mode of the SQL Server service.

        .DESCRIPTION
        Accepts objects from Get-DbaService and performs a corresponding action.

        .PARAMETER InputObject
        A collection of services from Get-DbaService.

        .PARAMETER Mode
        Startup mode of the service: Automatic, Manual or Disabled.

        .PARAMETER WhatIf
        Shows what would happen if the cmdlet runs. The cmdlet is not run.

        .PARAMETER Confirm
        Prompts you for confirmation before running the cmdlet.

        .NOTES
        Author: Kirill Kravtsov ( @nvarscar )

        dbatools PowerShell module (https://dbatools.io)
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

        .EXAMPLE
        Get-DbaService -ComputerName sql1 | Set-ServiceStartMode -Mode 'Manual'

        Sets all SQL services on sql1 to Manual startup.

        .EXAMPLE
        $services = Get-DbaService -ComputerName sql1
        Set-ServiceStartMode -InputObject $services -Mode 'Automatic'

        Sets all SQL services on sql1 to Automatic startup.

    #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [string]$Mode,
        [parameter(ValueFromPipeline, Mandatory)]
        [object[]]$InputObject
    )
    begin {
        $callStack = Get-PSCallStack
        if ($callStack.Length -gt 1) {
            $callerName = $callStack[1].Command
        } else {
            $callerName = $callStack[0].Command
        }
        $ProcessArray = @()
    }
    process {
        #Get all the objects from the pipeline before proceeding
        $ProcessArray += $InputObject
    }
    end {
        foreach ($service in $ProcessArray) {
            #Get WMI object
            $Wmi = Get-DbaCmObject -ComputerName $service.ComputerName -Namespace "root\cimv2" -Query "SELECT * FROM Win32_Service WHERE Name = '$($service.ServiceName)'" -EnableException
            if ($Pscmdlet.ShouldProcess($Wmi, "Changing the Start Mode to $Mode")) {
                $x = $Wmi | Invoke-CimMethod -MethodName ChangeStartMode -Arguments @{ StartMode = $Mode }
                if ($x.ReturnValue -ne 0) {
                    Stop-Function -EnableException $EnableException -Message ("The attempt to change the start mode of $($service.ServiceName) on $($service.ComputerName) returned the following message: " + (Get-DbaServiceErrorMessage $x.ReturnValue))
                    return
                }
            }
        }
    }
}

tools\dbatools\internal\functions\Set-WmiFilestreamSetting.ps1

function Set-FileSystemSetting {
    # not available in SQL WMI
    [CmdletBinding()]
    param (
        [DbaInstance]$Instance,
        [PSCredential]$Credential,
        [string]$ShareName,
        [int]$FilestreamLevel
    )
    begin {
        function Get-WmiFilestreamReturnValue {
            [CmdletBinding()]
            param (
                [object]$Value
            )
            switch ($Value) {
                2147217396 {
                    "Filestream not supported on instance"
                }
                2147217386 {
                    "Filestream cannot change share"
                }
                2147024713 {
                    "Duplicate sharename"
                }
                2147024891 {
                    "Access denied"
                }
                2147023681 {
                    "Invalid sharename"
                }
                2147024690 {
                    "Sharename too long"
                }
                2147019889 {
                    "Primary node not enabled "
                }
                2147019848 {
                    "Sharename node mismatch"
                }
                214721740 {
                    "General error"
                }
                { 2147021885 -or 2147945411 -or 0 } {
                    "The requested operation is successful. Changes will not be effective until the service is restarted."
                }
                default {
                    $return.ReturnValue
                }
            }
        }

        function Get-WmiFilestreamSetting {
            # not available in SQL WMI
            [CmdletBinding()]
            param (
                [DbaInstance]$Instance,
                [PSCredential]$Credential
            )

            $computer = $computerName = $Machine = $instance.ComputerName
            $instanceName = $instance.InstanceName

            Write-Message -Level Verbose -Message "Attempting to connect to $computer's WMI"
            $ognamespace = Get-DbaCmObject -EnableException -ComputerName $computerName -Namespace root\Microsoft\SQLServer -Query "SELECT NAME FROM __NAMESPACE WHERE NAME LIKE 'ComputerManagement%'"
            $namespace = $ognamespace | Where-Object {
                (Get-DbaCmObject -EnableException -ComputerName $computerName -Namespace $("root\Microsoft\SQLServer\" + $_.Name) -ClassName FilestreamSettings).Count -gt 0
            } |
                Sort-Object Name -Descending | Select-Object -First 1

            if (-not $namespace) {
                $namespace = $ognamespace
            }

            if ($namespace.Name) {
                if ($Credential) {
                    $wmi = Get-WmiObject -Credential $Credential -ErrorAction Stop -ComputerName $computerName -Namespace $("root\Microsoft\SQLServer\" + $namespace.Name) -Class FilestreamSettings | Where-Object InstanceName -eq $instanceName | Select-Object -First 1
                } else {
                    $wmi = Get-WmiObject -ErrorAction Stop -ComputerName $computerName -Namespace $("root\Microsoft\SQLServer\" + $namespace.Name) -Class FilestreamSettings | Where-Object InstanceName -eq $instanceName | Select-Object -First 1
                }
            }
            $wmi
        }
    }
    process {
        # Server level
        if ($Force -or $PSCmdlet.ShouldProcess($instance, "Enabling filestream")) {
            try {
                $wmi = Get-WmiFilestreamSetting -Instance $instance -ErrorAction Stop
                if ($ShareName) {
                    $null = $wmi.ShareName = $ShareName
                }
                $return = $wmi.EnableFilestream($FileStreamLevel, $instance.InstanceName)
                $returnvalue = Get-WmiFilestreamReturnValue -Value $return.ReturnValue
            } catch {
                Stop-Function -Message "Failure" -ErrorRecord $_ -Continue
            }
        }
        $returnvalue
    }
}

tools\dbatools\internal\functions\Show-Notification.ps1

function Show-Notification {
    param(
        $GalleryVersion,
        $Title = "dbatools update",
        $Text = "Version $GalleryVersion is now available"
    )
    # ensure the dbatools 'app' exists in registry so that it doesn't immediately disappear from Action Center
    $regPath = 'HKCU:\SOFTWARE\Microsoft\Windows\CurrentVersion\Notifications\Settings'
    $appId = "{1AC14E77-02E7-4E5D-B744-2EB1AE5198B7}\WindowsPowerShell\v1.0\powershell.exe"

    if (!(Test-Path -Path "$regPath\$appId")) {
        Write-Verbose "Adding required registry entry at $("$regPath\$appId")"
        $null = New-Item -Path "$regPath\$appId" -Force
        $null = New-ItemProperty -Path "$regPath\$appId" -Name 'ShowInActionCenter' -Value 1 -PropertyType 'DWORD' -Force
    }
    $null = [Windows.UI.Notifications.ToastNotificationManager, Windows.UI.Notifications, ContentType = WindowsRuntime]
    $template = [Windows.UI.Notifications.ToastTemplateType]::ToastImageAndText02
    [xml]$toastTemplate = ([Windows.UI.Notifications.ToastNotificationManager]::GetTemplateContent($template).GetXml())

    [xml]$toastTemplate = "
    <toast launch=`"app-defined-string`">
        <visual>
            <binding template=`"ToastGeneric`">
                <text>`"$Title`"</text>
                <text>`"$Text`"</text>
            </binding>
        </visual>
        <actions>
            <action activationType=`"background`" content=`"OK`" arguments=`"later`"/>
        </actions>
    </toast>"

    $toastXml = New-Object -TypeName Windows.Data.Xml.Dom.XmlDocument
    $toastXml.LoadXml($toastTemplate.OuterXml)

    $notify = [Windows.UI.Notifications.ToastNotificationManager]::CreateToastNotifier($appId)
    $notify.Show($toastXml)
}

tools\dbatools\internal\functions\Start-DbccCheck.ps1

function Start-DbccCheck {
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [object]$server,
        [string]$dbname,
        [switch]$table
    )

    $servername = $server.name

    if ($Pscmdlet.ShouldProcess($sourceserver, "Running dbcc check on $dbname on $servername")) {
        if ($server.ConnectionContext.StatementTimeout = 0 -ne 0) {
            $server.ConnectionContext.StatementTimeout = 0
        }

        try {
            if ($table) {
                $null = $server.databases[$dbname].CheckTables('None')
                Write-Verbose "Dbcc CheckTables finished successfully for $dbname on $servername"
            } else {
                $null = $server.Query("DBCC CHECKDB ([$dbname])")
                Write-Verbose "Dbcc CHECKDB finished successfully for $dbname on $servername"
            }
            return "Success"
        } catch {
            $message = $_.Exception
            if ($null -ne $_.Exception.InnerException) { $message = $_.Exception.InnerException }

            # english cleanup only sorry
            try {
                $newmessage = ($message -split "at Microsoft.SqlServer.Management.Common.ConnectionManager.ExecuteTSql")[0]
                $newmessage = ($newmessage -split "Microsoft.SqlServer.Management.Common.ExecutionFailureException:")[1]
                $newmessage = ($newmessage -replace "An exception occurred while executing a Transact-SQL statement or batch. ---> System.Data.SqlClient.SqlException:").Trim()
                $message = $newmessage
            } catch {
                $null
            }
            return $message.Trim()
        }
    }
}

tools\dbatools\internal\functions\Get-SqlInstanceComponent.ps1

function Get-SQLInstanceComponent {
    <#
    .SYNOPSIS
        Retrieves SQL server information from a local or remote servers.
    .DESCRIPTION
        Retrieves SQL server information from a local or remote servers. Pulls all instances from a SQL server and
        detects if in a cluster or not.
    .PARAMETER ComputerName
        Local or remote systems to query for SQL information.
    .NOTES
        Tags: Install, Patching, SP, CU, Instance
        Author: Kirill Kravtsov (@nvarscar) https://nvarscar.wordpress.com/

        Based on https://github.com/adbertram/PSSqlUpdater
        The majority of this function was created by Boe Prox.
    .EXAMPLE
        Get-SQLInstanceComponent -ComputerName SQL01 -Component SSDS
        ComputerName  : BDT005-BT-SQL
        InstanceType  : Database Engine
        InstanceName  : MSSQLSERVER
        InstanceID    : MSSQL11.MSSQLSERVER
        Edition       : Enterprise Edition
        Version       : 11.1.3000.0
        Caption       : SQL Server 2012
        IsCluster     : False
        IsClusterNode : False
        ClusterName   :
        ClusterNodes  : {}
        FullName      : BDT005-BT-SQL
        Description
        -----------
        Retrieves the SQL instance information from SQL01 for component type SSDS (Database Engine).
    .EXAMPLE
        Get-SQLInstanceComponent -ComputerName SQL01
        ComputerName  : BDT005-BT-SQL
        InstanceType  : Analysis Services
        InstanceName  : MSSQLSERVER
        InstanceID    : MSAS11.MSSQLSERVER
        Edition       : Enterprise Edition
        Version       : 11.1.3000.0
        Caption       : SQL Server 2012
        IsCluster     : False
        IsClusterNode : False
        ClusterName   :
        ClusterNodes  : {}
        FullName      : BDT005-BT-SQL
        ComputerName  : BDT005-BT-SQL
        InstanceType  : Reporting Services
        InstanceName  : MSSQLSERVER
        InstanceID    : MSRS11.MSSQLSERVER
        Edition       : Enterprise Edition
        Version       : 11.1.3000.0
        Caption       : SQL Server 2012
        IsCluster     : False
        IsClusterNode : False
        ClusterName   :
        ClusterNodes  : {}
        FullName      : BDT005-BT-SQL
        Description
        -----------
        Retrieves the SQL instance information from SQL01 for all component types (SSAS, SSDS, SSRS).
    #>

    [CmdletBinding()]
    param
    (
        [Parameter(ValueFromPipeline, ValueFromPipelineByPropertyName)]
        [Alias('Computer', 'DNSHostName', 'IPAddress')]
        [DbaInstanceParameter[]]$ComputerName = $Env:COMPUTERNAME,
        [ValidateSet('SSDS', 'SSAS', 'SSRS')]
        [string[]]$Component = @('SSDS', 'SSAS', 'SSRS'),
        [pscredential]$Credential,
        [bool]$EnableException = $EnableException
    )

    begin {

        $regScript = {
            Param (
                [ValidateSet('SSDS', 'SSAS', 'SSRS')]
                [string[]]$Component = @('SSDS', 'SSAS', 'SSRS')
            )
            $componentNameMap = @(
                [pscustomobject]@{
                    ComponentName = 'SSAS';
                    DisplayName   = 'Analysis Services';
                    RegKeyName    = "OLAP";
                },
                [pscustomobject]@{
                    ComponentName = 'SSDS';
                    DisplayName   = 'Database Engine';
                    RegKeyName    = 'SQL';
                },
                [pscustomobject]@{
                    ComponentName = 'SSRS';
                    DisplayName   = 'Reporting Services';
                    RegKeyName    = 'RS';
                }
            );

            function Get-SQLInstanceDetail {
                <#
                    .SYNOPSIS
                        The majority of this function was created by Boe Prox.
                #>
                param
                (
                    [Parameter(Mandatory, ValueFromPipeline, ValueFromPipelineByPropertyName)]
                    [string[]]$Instance,

                    [Parameter(Mandatory)]
                    [ValidateNotNullOrEmpty()]
                    [Microsoft.Win32.RegistryKey]$RegKey,

                    [Parameter(Mandatory)]
                    [ValidateNotNullOrEmpty()]
                    [Microsoft.Win32.RegistryKey]$reg,

                    [Parameter(Mandatory)]
                    [ValidateNotNullOrEmpty()]
                    [string]$RegPath
                )
                process {
                    #region Process each instance
                    foreach ($sqlInstance in $Instance) {
                        $log = @()
                        $nodes = New-Object System.Collections.ArrayList;
                        $clusterName = $null;
                        $isCluster = $false;
                        $instanceValue = $regKey.GetValue($sqlInstance);
                        $log += "Working with $regPath\$instanceValue on $computer"
                        $instanceReg = $reg.OpenSubKey("$regPath\\$instanceValue");
                        if ($instanceReg.GetSubKeyNames() -contains 'Cluster') {
                            $isCluster = $true;
                            $instanceRegCluster = $instanceReg.OpenSubKey('Cluster');
                            $clusterName = $instanceRegCluster.GetValue('ClusterName');
                            #Write-Message -Level Verbose -Message "Getting cluster node names";
                            $clusterReg = $reg.OpenSubKey("Cluster\\Nodes");
                            $clusterNodes = $clusterReg.GetSubKeyNames();
                            if ($clusterNodes) {
                                foreach ($clusterNode in $clusterNodes) {
                                    $null = $nodes.Add($clusterReg.OpenSubKey($clusterNode).GetValue("NodeName").ToUpper());
                                }
                            }
                        }

                        #region Gather additional information about SQL instance
                        $instanceRegSetup = $instanceReg.OpenSubKey("Setup")

                        #region Get SQL instance directory
                        try {
                            $instanceDir = $instanceRegSetup.GetValue("SqlProgramDir");
                            if (([System.IO.Path]::GetPathRoot($instanceDir) -ne $instanceDir) -and $instanceDir.EndsWith("\")) {
                                $instanceDir = $instanceDir.Substring(0, $instanceDir.Length - 1);
                            }
                        } catch {
                            $instanceDir = $null;
                        }
                        #endregion Get SQL instance directory

                        #region Get SQL edition
                        try {
                            $edition = $instanceRegSetup.GetValue("Edition");
                        } catch {
                            $edition = $null;
                        }
                        #endregion Get SQL edition

                        #region Get resume value
                        try {
                            $resume = [bool][int]$instanceRegSetup.GetValue("Resume");
                        } catch {
                            $resume = $false;
                        }
                        #endregion Get resume value

                        #region Get SQL version
                        $version = $null
                        try {
                            $versionHash = @{
                                '11' = 'SQLServer2012'
                                '12' = 'SQLServer2014'
                                '13' = 'SQLServer2016'
                                '14' = 'SQL2017'
                                '15' = 'SQL2019'
                            }
                            $version = $instanceRegSetup.GetValue("Version");
                            $log += "Found version $version"
                            if ($patchVersion = $instanceRegSetup.GetValue("PatchLevel")) {
                                $log += "Using patch version $patchVersion over $version"
                                $version = $patchVersion
                            }
                            # if patch version is not available - use global reg node to extract the latest patch
                            $majorVersion = $version.Split('.')[0]
                            if (!$patchVersion -and $majorVersion -and $versionHash[$majorVersion]) {
                                $verKey = $reg.OpenSubKey("SOFTWARE\\Microsoft\\Microsoft SQL Server\\$($majorVersion)0\\$($versionHash[$majorVersion])\\CurrentVersion")
                                $version = $verKey.GetValue('Version')
                                $log += "New version from the CurrentVersion key: $version"
                            }
                        } catch {
                            $log += "Failed to read one of the reg keys, found version $version so far"
                        }
                        #endregion Get SQL version

                        #region Get exe version
                        try {
                            # attempt to recover a real version of a sqlservr.exe by getting file properties from a remote machine
                            # not sure how to support SSRS/SSAS, as SSDS is the only one that has binary path in the Setup node
                            if ($binRoot = $instanceRegSetup.GetValue("SQLBinRoot")) {
                                $fileVersion = Invoke-Command2 -ArgumentList $binRoot -Raw -Credential $Credential -ComputerName $computer -ScriptBlock {
                                    Param (
                                        $Path
                                    )
                                    (Get-Item -Path (Join-Path $Path "sqlservr.exe") -ErrorAction Stop).VersionInfo.ProductVersion
                                }
                                if ($fileVersion) {
                                    $version = $fileVersion
                                    $log += "New version from the binary file: $version"
                                }
                            }
                        } catch {
                            $log += "Failed to get exe version, leaving $version as is"
                        }
                        #endregion Get exe version

                        #endregion Gather additional information about SQL instance

                        #region Generate return object
                        [pscustomobject]@{
                            ComputerName  = $computer.ToUpper();
                            InstanceName  = $sqlInstance;
                            InstanceID    = $instanceValue;
                            InstanceDir   = $instanceDir;
                            Edition       = $edition;
                            Version       = $version;
                            Caption       = {
                                switch -regex ($version) {
                                    "^11" { "SQL Server 2012"; break }
                                    "^10\.5" { "SQL Server 2008 R2"; break }
                                    "^10" { "SQL Server 2008"; break }
                                    "^9" { "SQL Server 2005"; break }
                                    "^8" { "SQL Server 2000"; break }
                                    default { "Unknown"; }
                                }
                            }.InvokeReturnAsIs();
                            IsCluster     = $isCluster;
                            IsClusterNode = ($nodes -contains $computer);
                            ClusterName   = $clusterName;
                            ClusterNodes  = ($nodes -ne $computer);
                            FullName      = {
                                if ($sqlInstance -eq "MSSQLSERVER") {
                                    $computer.ToUpper();
                                } else {
                                    "$($computer.ToUpper())\$($sqlInstance)";
                                }
                            }.InvokeReturnAsIs();
                            Log           = $log
                            Resume        = $resume
                        }
                        #endregion Generate return object
                    }
                    #endregion Process each instance
                }
            }
            $reg = [Microsoft.Win32.RegistryKey]::OpenBaseKey('LocalMachine', 'Default')
            $baseKeys = "SOFTWARE\\Microsoft\\Microsoft SQL Server", "SOFTWARE\\Wow6432Node\\Microsoft\\Microsoft SQL Server";
            if ($reg.OpenSubKey($baseKeys[0])) {
                $regPath = $baseKeys[0];
            } elseif ($reg.OpenSubKey($baseKeys[1])) {
                $regPath = $baseKeys[1];
            } else {
                throw "Failed to find any regkeys on $env:computername"
            }

            $computer = $Env:COMPUTERNAME

            $regKey = $reg.OpenSubKey("$regPath");
            if ($regKey.GetSubKeyNames() -contains "Instance Names") {
                foreach ($componentName in $Component) {
                    $componentRegKeyName = $componentNameMap |
                        Where-Object { $_.ComponentName -eq $componentName } |
                        Select-Object -ExpandProperty RegKeyName;
                    $regKey = $reg.OpenSubKey("$regPath\\Instance Names\\{0}" -f $componentRegKeyName);
                    if ($regKey) {
                        foreach ($regValueName in $regKey.GetValueNames()) {
                            if ($componentRegKeyName -eq 'RS' -and $regValueName -eq 'PBIRS') { continue } #filtering out Power BI - not supported
                            if ($componentRegKeyName -eq 'RS' -and $regValueName -eq 'SSRS') { continue }  #filtering out SSRS2017+ - not supported
                            $result = Get-SQLInstanceDetail -RegPath $regPath -Reg $reg -RegKey $regKey -Instance $regValueName;
                            $result | Add-Member -Type NoteProperty -Name InstanceType -Value ($componentNameMap | Where-Object { $_.ComponentName -eq $componentName }).DisplayName -PassThru
                        }
                    }
                }
            } elseif ($regKey.GetValueNames() -contains 'InstalledInstances') {
                $isCluster = $false;
                $regKey.GetValue('InstalledInstances') | ForEach-Object {
                    Get-SQLInstanceDetail -RegPath $regPath -Reg $reg -RegKey $regKey -Instance $_;
                };
            } else {
                throw "Failed to find any instance names on $env:computername"
            }
        }
    }
    process {
        foreach ($computer in $ComputerName) {
            try {
                $results = Invoke-Command2 -ComputerName $computer -ScriptBlock $regScript -Credential $Credential -ErrorAction Stop -Raw -ArgumentList @($Component)
            } catch {
                Stop-Function -Message "Failed to get instance components from $computer" -ErrorRecord $_ -Continue
            }
            # Log is stored in the log property, pile it all into the debug log
            foreach ($logEntry in $results.Log) {
                Write-Message -Level Debug -Message $logEntry
            }
            foreach ($result in $results) {
                #Replace first decimal of the minor build with a 0, since we're using build numbers here
                #Refer to https://sqlserverbuilds.blogspot.com/
                Write-Message -Level Debug -Message "Converting version $($result.Version) to [version]"
                $newVersion = New-Object -TypeName System.Version -ArgumentList ([string]$result.Version)
                $newVersion = New-Object -TypeName System.Version -ArgumentList ($newVersion.Major , ($newVersion.Minor - $newVersion.Minor % 10), $newVersion.Build)
                Write-Message -Level Debug -Message "Converted version $($result.Version) to $newVersion"
                #Find a proper build reference and replace Version property
                $result.Version = Get-DbaBuildReference -Build $newVersion
                $result | Select-Object -ExcludeProperty Log
            }
        }
    }
}

tools\dbatools\internal\functions\Get-TableNameParts.ps1

function Get-TableNameParts {
    <#
    .SYNOPSIS
        Parse a one, two, or three part table name into seperate paths

    .DESCRIPTION
    Generates a hash string based on the plaintext or securestring password and a SQL Server version. Salt is optional

    .PARAMETER Table
        The table name to parse. You can specify a one, two, or three part table name.
        If the object has special characters they must be wrapped in square brackets [ ].
        If the name contains character ']' this must be escaped by duplicating the character

    .NOTES
        Tags: Table, Internal
        Author: Patrick Flynn (@sqllensman)

        Website: https://dbatools.io
        Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        Get-TableNameParts 'table'

        Parses a three-part name into its constitute parts.

    .EXAMPLE
        Get-TableNameParts '[Bad. Name]]].[Schema.With.Dots]]].[Another .Silly]] Name..]'

        Parses a three-part name into its constitute parts. Uses square brackets to enclose special characters.
    #>
    param (
        [string]$Table
    )
    process {
        $fqtns = @()
        #Tables with a ']' charcter in name need to be handeled
        #Require charcter to be escaped by being duplicated as per T-SQL QuoteName function
        #These need to be temporarily replaced to allow name to be parsed.
        $t = $Table
        if ($t.Contains(']]')) {
            for ($i = 0; $i -le 65535; $i++) {
                $hexStr = '{0:X4}' -f $i
                $char = [regex]::Unescape("\u$($HexStr)")
                if (!$Table.Contains($Char)) {
                    $fixChar = $Char
                    $t = $t.Replace(']]', $fixChar)
                    Break
                }
            }
        } else {
            $fixChar = $null
        }
        $splitName = [regex]::Matches($t, "(\[.+?\])|([^\.]+)").Value
        $dotcount = $splitName.Count

        $splitDb = $Schema = $tbl = $null

        switch ($dotcount) {
            1 {
                $tbl = $t
                $parsed = $true
            }
            2 {
                $schema = $splitName[0]
                $tbl = $splitName[1]
                $parsed = $true
            }
            3 {
                $splitDb = $splitName[0]
                $schema = $splitName[1]
                $tbl = $splitName[2]
                $parsed = $true
            }
            default {
                $parsed = $false
            }
        }
        if ($splitDb -like "[[]*[]]") {
            $splitDb = $splitDb.Substring(1, ($splitDb.Length - 2))
            if ($fixChar) {
                $splitDb = $splitDb.Replace($fixChar, ']')
            }
        }

        if ($schema -like "[[]*[]]") {
            $schema = $schema.Substring(1, ($schema.Length - 2))
            if ($fixChar) {
                $schema = $schema.Replace($fixChar, ']')
            }
        }

        if ($tbl -like "[[]*[]]") {
            $tbl = $tbl.Substring(1, ($tbl.Length - 2))
            if ($fixChar) {
                $tbl = $tbl.Replace($fixChar, ']')
            }
        }
        $fqtns = [PSCustomObject] @{
            InputValue = $Table
            Database   = $splitDb
            Schema     = $Schema
            Table      = $tbl
            Parsed     = $parsed
        }
        return $fqtns
    }
}

tools\dbatools\internal\functions\Get-WmiHadr.ps1

function Get-WmiHadr {
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter[]]$SqlInstance,
        [PSCredential]$Credential,
        [Alias('Silent')]
        [switch]$EnableException
    )
    process {
        foreach ($instance in $SqlInstance) {

            try {
                $computer = $computerName = $instance.ComputerName
                $instanceName = $instance.InstanceName
                $currentState = Invoke-ManagedComputerCommand -ComputerName $computerName -ScriptBlock { $wmi.Services[$args[0]] | Select-Object IsHadrEnabled } -ArgumentList $instanceName -Credential $Credential
            } catch {
                Stop-Function -Message "Failure connecting to $computer" -Category ConnectionError -ErrorRecord $_ -Target $instance
                return
            }

            if ($null -eq $currentState.IsHadrEnabled) {
                $isenabled = $false
            } else {
                $isenabled = $currentState.IsHadrEnabled
            }
            [PSCustomObject]@{
                ComputerName  = $computer
                InstanceName  = $instanceName
                SqlInstance   = $instance.FullName
                IsHadrEnabled = $isenabled
            }
        }
    }
}

tools\dbatools\internal\functions\Get-XpDirTreeRestoreFile.ps1

function Get-XpDirTreeRestoreFile {
    <#
    .SYNOPSIS
        Internal Function to get SQL Server backfiles from a specified folder using xp_dirtree

    .DESCRIPTION
        Takes path, checks for validity. Scans for usual backup file

    .PARAMETER Path
        The path to retrieve the restore for.

    .PARAMETER SqlInstance
        The SQL Server that you're connecting to.

    .PARAMETER SqlCredential
        Credential object used to connect to the SQL Server as a different user

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .EXAMPLE
        PS C:\> Get-XpDirTreeRestoreFile -Path '\\foo\bar\' -SqlInstance $SqlInstance

        Tests whether the instance $SqlInstance has access to the path \\foo\bar\
    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [string]$Path,
        [parameter(Mandatory)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter]$SqlInstance,
        [System.Management.Automation.PSCredential]$SqlCredential,
        [Alias('Silent')]
        [switch]$EnableException,
        [switch]$NoRecurse
    )

    Write-Message -Level InternalComment -Message "Starting"

    $server = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential
    $pathSep = Get-DbaPathSep -Server $server
    if (($path -like '*.bak') -or ($path -like '*.trn')) {
        # For a future person who knows what's up, please replace this comment with the reason this is empty
    } elseif ($Path[-1] -ne $pathSep) {
        $Path = $Path + $pathSep
    }

    if (!(Test-DbaPath -SqlInstance $server -path $path)) {
        Stop-Function -Message "SqlInstance $SqlInstance cannot access $path" -EnableException $true
    }
    if (!(Test-DbaPath -SqlInstance $server -path $Path)) {
        Stop-Function -Message "SqlInstance $SqlInstance cannot access $Path" -EnableException $true
    }
    if ($server.VersionMajor -ge 14) {
        # this is all kinds of cool, api could be expanded sooo much here
        $sql = "SELECT file_or_directory_name AS subdirectory, ~CONVERT(BIT, is_directory) as [file], 1 as depth
        FROM sys.dm_os_enumerate_filesystem('$Path', '*')
        WHERE  [level] = 0"
    } elseif ($server.VersionMajor -lt 9) {
        $sql = "EXEC master..xp_dirtree '$Path',1,1;"
    } else {
        $sql = "EXEC master.sys.xp_dirtree '$Path',1,1;"
    }
    #$queryResult = Invoke-DbaQuery -SqlInstance $SqlInstance -Credential $SqlCredential -Database tempdb -Query $query
    $queryResult = $server.Query($sql)
    Write-Message -Level Debug -Message $sql
    $dirs = $queryResult | Where-Object file -eq 0
    $Results = @()
    $Results += $queryResult | Where-Object file -eq 1 | Select-Object @{ Name = "FullName"; Expression = { $path + $_.subdirectory } }

    if ($True -ne $NoRecurse) {
        foreach ($d in $dirs) {
            $fullpath = $path + $d.subdirectory
            Write-Message -Level Verbose -Message "Enumerating subdirectory '$fullpath'"
            $Results += Get-XpDirTreeRestoreFile -Path $fullpath -SqlInstance $server
        }
    }
    return $Results
}

tools\dbatools\internal\functions\Import-DbaCmdlet.ps1

function Import-DbaCmdlet {
    <#
    .SYNOPSIS
        Loads a cmdlet into the current context.

    .DESCRIPTION
        Loads a cmdlet into the current context.
        This can be used to register a cmdlet during module import, making it easy to have hybrid modules publishing both cmdlets and functions.
        Can also be used to register cmdlets written in PowerShell classes.

    .PARAMETER Name
        The name of the cmdlet to register.

    .PARAMETER Type
        The type of the class implementing the cmdlet.

    .PARAMETER HelpFile
        Path to the help XML containing the help for the cmdlet.

    .PARAMETER Module
        Module to inject the cmdlet into.

    .EXAMPLE
        PS C:\> Import-DbaCmdlet -Name Get-Something -Type ([GetSomethingCommand])

        Imports the Get-Something cmdlet into the current context.

    .EXAMPLE
        PS C:\> Import-DbaCmdlet -Name Get-Something -Type ([GetSomethingCommand]) -Module (Get-Module PSReadline)

        Imports the Get-Something cmdlet into the PSReadline module.

    .NOTES
        Original Author: Chris Dent
        Link: https://www.indented.co.uk/cmdlets-without-a-dll/
    #>
    [CmdletBinding()]
    param (
        [Parameter(Mandatory)]
        [String]
        $Name,

        [Parameter(Mandatory)]
        [Type]
        $Type,

        [string]
        $HelpFile,

        [System.Management.Automation.PSModuleInfo]
        $Module
    )

    begin {
        $scriptBlock = {
            param (
                [String]
                $Name,

                [Type]
                $Type,

                [string]
                $HelpFile
            )

            $sessionStateCmdletEntry = New-Object System.Management.Automation.Runspaces.SessionStateCmdletEntry(
                $Name,
                $Type,
                $HelpFile
            )

            # System.Management.Automation.Runspaces.LocalPipeline will let us get at ExecutionContext.
            # Note: $ExecutionContext is *not* an instance of this object.
            $pipelineType = [PowerShell].Assembly.GetType('System.Management.Automation.Runspaces.LocalPipeline')
            $method = $pipelineType.GetMethod(
                'GetExecutionContextFromTLS',
                [System.Reflection.BindingFlags]'Static,NonPublic'
            )

            # Invoke the method to get an instance of ExecutionContext.
            $context = $method.Invoke(
                $null,
                [System.Reflection.BindingFlags]'Static,NonPublic',
                $null,
                $null,
                (Get-Culture)
            )

            # Get the SessionStateInternal type
            $internalType = [PowerShell].Assembly.GetType('System.Management.Automation.SessionStateInternal')

            # Get a valid constructor which accepts a param of type ExecutionContext
            $constructor = $internalType.GetConstructor(
                [System.Reflection.BindingFlags]'Instance,NonPublic',
                $null,
                $context.GetType(),
                $null
            )

            # Get the SessionStateInternal for this execution context
            $sessionStateInternal = $constructor.Invoke($context)

            # Get the method which allows Cmdlets to be added to the session
            $method = $internalType.GetMethod(
                'AddSessionStateEntry',
                [System.Reflection.BindingFlags]'Instance,NonPublic',
                $null,
                $sessionStateCmdletEntry.GetType(),
                $null
            )
            # Invoke the method.
            $method.Invoke($sessionStateInternal, $sessionStateCmdletEntry)
        }
    }

    process {
        if (-not $Module) { $scriptBlock.Invoke($Name, $Type, $HelpFile) }
        else { $Module.Invoke($scriptBlock, @($Name, $Type, $HelpFile)) }
    }
}

tools\dbatools\internal\functions\Invoke-Create.ps1

function Invoke-Create {
    <#
        For stubborn .net objects that won't throw properly
       #>
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [object]$Object
    )
    process {
        if ($Object.Name) {
            $Name = $Object.Name
        } else {
            $Name = "target object"
        }
        if ($Pscmdlet.ShouldProcess($Name, "Performing create")) {
            $ErrorActionPreference = 'Stop'
            $EnableException = $true
            $Object.Create()
        }
    }
}

tools\dbatools\internal\functions\Get-DbaPathSep.ps1

function Get-DbaPathSep {
    <#
    Gets the instance path separator, if exists, or return the default one
       #>
    [CmdletBinding()]
    param (
        [object]$Server
    )

    $pathSep = $Server.PathSeparator
    if ($pathSep.Length -eq 0) {
        $pathSep = '\'
    }
    return $pathSep
}

tools\dbatools\internal\functions\Invoke-TagCommand.ps1

function Invoke-TagCommand ([string]$Tag, [string]$Keyword) {
    <#
.SYNOPSIS
    An internal command, feel free to ignore.

.EXAMPLE
    Tag-Command -Tag Restore -Keyword Restore
    Tag-Command -Tag Backup -Keyword Backup
    Tag-Command -Tag Orphan -Keyword Orphan
    Tag-Command -Tag DisasterRecovery -Keyword Attach
    Tag-Command -Tag DisasterRecovery -Keyword Detach
    Tag-Command -Tag Snapshot -Keyword Snapshot
    Tag-Command -Tag Memory -Keyword Memory
    Tag-Command -Tag DisasterRecovery -Keyword Restore
    Tag-Command -Tag DisasterRecovery -Keyword Backup
    Tag-Command -Tag Storage -Keyword disk
    Tag-Command -Tag Storage -Keyword storage
    Tag-Command -Tag Migration -Keyword "Copy-"
    Tag-Command -Tag SPN -Keyword Kerberos
    Tag-Command -Tag SPN -Keyword SPN
    Tag-Command -Tag CIM -Keyword CimSession
    Tag-Command -Tag SQLWMI -Keyword Invoke-ManagedComputerCommand
    Tag-Command -Tag WSMan -Keyword Invoke-Command

    #>

    $tagsRex = ([regex]'(?m)^[\s]{0,15}Tags:(.*)$')
    $modulepath = (Get-Module -Name dbatools).Path
    $directory = Split-Path $modulepath
    $basedir = "$directory\functions\"
    Import-Module $modulepath -force
    $allfiles = Get-ChildItem $basedir
    foreach ($f in $allfiles) {
        if ($f -eq "Find-DbaCommand.ps1") { continue }

        $content = Get-Content $f.fullname
        if ($content -like "*$keyword*") {
            Write-Message -Level Warning -Message "$f needs a tag tag"
            $cmdname = $f.name.replace('.ps1', '')

            $fullhelp = get-help $cmdname -full

            $as = $fullhelp.alertset | out-string

            $tags = $tagsrex.Match($as).Groups[1].Value

            if ($tags) {
                $tags = $tags.ToString().split(',').Trim()
                Write-Message -Level Warning -Message "adding tags to existing ones"
                if ($tag -in $tags) {
                    Write-Message -Level Warning -Message "tag $tag is already present"
                    continue
                }
                $out = @()
                foreach ($line in $content) {
                    if ($line.trim().startsWith('Tags:')) {
                        $out += "$line, $tag"
                    } else {
                        $out += $line
                    }
                }
                Write-Message -Level Warning -Message "replacing content into $($f.fullname)"
                $out -join "`r`n" | Set-Content $f.fullname -Encoding UTF8

            } else {
                Write-Message -Level Warning -Message "need to add tags"
                $out = @()
                foreach ($line in $content) {
                    if ($line.startsWith('.NOTES')) {
                        $out += '.NOTES'
                        $out += "Tags: $tag"
                    } else {
                        $out += $line
                    }
                }
                Write-Message -Level Warning -Message "replacing content into $($f.fullname)"
                $out -join "`r`n" | Set-Content $f.fullname -Encoding UTF8
            }
        }
    }
}

tools\dbatools\internal\functions\Invoke-TlsWebRequest.ps1

function Invoke-TlsWebRequest {
    <#
    Internal utility that mimics invoke-webrequest
    but enables all tls available version
    rather than the default, which on a lot
    of standard installations is just TLS 1.0

       #>
    $currentVersionTls = [Net.ServicePointManager]::SecurityProtocol
    $currentSupportableTls = [Math]::Max($currentVersionTls.value__, [Net.SecurityProtocolType]::Tls.value__)
    $availableTls = [enum]::GetValues('Net.SecurityProtocolType') | Where-Object { $_ -gt $currentSupportableTls }
    $availableTls | ForEach-Object {
        [Net.ServicePointManager]::SecurityProtocol = [Net.ServicePointManager]::SecurityProtocol -bor $_
    }

    Invoke-WebRequest @Args

    [Net.ServicePointManager]::SecurityProtocol = $currentVersionTls
}

tools\dbatools\internal\functions\message\Convert-DbaMessageException.ps1

function Convert-DbaMessageException {
    <#
    .SYNOPSIS
        Transforms the Exception input to the message system.

    .DESCRIPTION
        Transforms the Exception input to the message system.

        If there is an exception running a transformation scriptblock, it will log the error in the transform error queue and return the original object instead.

    .PARAMETER Exception
        The input Exception object, that might have to be transformed (may not either)

    .PARAMETER FunctionName
        The function writing the message

    .PARAMETER ModuleName
        The module, that the function writing the message is part of

    .EXAMPLE
        PS C:\> Convert-DbaMessageException -Exception $Exception -FunctionName 'Get-Test' -ModuleName 'MyModule'

        Checks internal storage for definitions that require a Exception transform, and either returns the original object or the transformed object.
    #>
    [CmdletBinding()]
    param (
        [Parameter(Mandatory)]
        $Exception,

        [Parameter(Mandatory)]
        [string]
        $FunctionName,

        [Parameter(Mandatory)]
        [string]
        $ModuleName
    )

    if ($null -eq $Exception) { return }

    $typeName = $Exception.GetType().FullName.ToLower()

    if ([Sqlcollaborative.Dbatools.Message.MessageHost]::ExceptionTransforms.ContainsKey($typeName)) {
        $scriptBlock = [Sqlcollaborative.Dbatools.Message.MessageHost]::ExceptionTransforms[$typeName]
        try {
            $tempException = $ExecutionContext.InvokeCommand.InvokeScript($false, ([scriptblock]::Create($scriptBlock.ToString())), $null, $Exception)
            return $tempException
        } catch {
            [Sqlcollaborative.Dbatools.Message.MessageHost]::WriteTransformError($_, $FunctionName, $ModuleName, $Exception, "Exception", ([System.Management.Automation.Runspaces.Runspace]::DefaultRunspace.InstanceId))
            return $Exception
        }
    }

    if ($transform = [Sqlcollaborative.Dbatools.Message.MessageHost]::ExceptionTransformList.Get($typeName, $ModuleName, $FunctionName)) {
        try {
            $tempException = $ExecutionContext.InvokeCommand.InvokeScript($false, ([scriptblock]::Create($transform.ScriptBlock.ToString())), $null, $Exception)
            return $tempException
        } catch {
            [Sqlcollaborative.Dbatools.Message.MessageHost]::WriteTransformError($_, $FunctionName, $ModuleName, $Exception, "Target", ([System.Management.Automation.Runspaces.Runspace]::DefaultRunspace.InstanceId))
            return $Exception
        }
    }

    return $Exception
}

tools\dbatools\internal\functions\message\Convert-DbaMessageLevel.ps1

function Convert-DbaMessageLevel {
    <#
    .SYNOPSIS
        Processes the effective message level of a message

    .DESCRIPTION
        Processes the effective message level of a message
        - Applies level decrements
        - Applies message level modifiers

    .PARAMETER OriginalLevel
        The level the message was originally written to

    .PARAMETER FromStopFunction
        Whether the message was passed through Stop-Function first.
        This is used to increment the automatic message level decrement counter by 1 (so it ignores the fact, that it was passed through Stop-Function).
        The automatic message level decrement functionality allows users to make nested commands' messages be less verbose.

    .PARAMETER Tags
        The tags that were added to the message

    .PARAMETER FunctionName
        The function that wrote the message.

    .PARAMETER ModuleName
        The module the function writing the message comes from.

    .EXAMPLE
        Convert-DbaMessageLevel -OriginalLevel $Level -FromStopFunction $fromStopFunction -Tags $Tag -FunctionName $FunctionName -ModuleName $ModuleName

        This will convert the original level of $Level based on the transformation rules for levels.
    #>
    [CmdletBinding()]
    param (
        [Parameter(Mandatory)]
        [Sqlcollaborative.Dbatools.Message.MessageLevel]
        $OriginalLevel,

        [Parameter(Mandatory)]
        [bool]
        $FromStopFunction,

        [Parameter(Mandatory)]
        [AllowNull()]
        [string[]]
        $Tags,

        [Parameter(Mandatory)]
        [string]
        $FunctionName,

        [Parameter(Mandatory)]
        [string]
        $ModuleName
    )

    $number = $OriginalLevel.value__

    if ([Sqlcollaborative.Dbatools.Message.MessageHost]::NestedLevelDecrement -gt 0) {
        $depth = (Get-PSCallStack).Count - 3
        if ($FromStopFunction) { $depth = $depth - 1 }
        $number = $number + $depth * ([Sqlcollaborative.Dbatools.Message.MessageHost]::NestedLevelDecrement)
    }

    foreach ($modifier in [Sqlcollaborative.Dbatools.Message.MessageHost]::MessageLevelModifiers.Values) {
        if ($modifier.AppliesTo($FunctionName, $ModuleName, $Tags)) {
            $number = $number + $modifier.Modifier
        }
    }

    # Finalize number and return
    if ($number -lt 1) { $number = 1 }
    if ($number -gt 9) { $number = 9 }
    return ([Sqlcollaborative.Dbatools.Message.MessageLevel]$number)
}

tools\dbatools\internal\functions\message\Convert-DbaMessageTarget.ps1

function Convert-DbaMessageTarget {
    <#
    .SYNOPSIS
        Transforms the target input to the message system.

    .DESCRIPTION
        Transforms the target input to the message system.

        If there is an exception running a transformation scriptblock, it will log the error in the transform error queue and return the original object instead.

    .PARAMETER Target
        The input target object, that might have to be transformed (may not either)

    .PARAMETER FunctionName
        The function writing the message

    .PARAMETER ModuleName
        The module, that the function writing the message is part of

    .EXAMPLE
        PS C:\> Convert-DbaMessageTarget -Target $Target -FunctionName 'Get-Test' -ModuleName 'MyModule'

        Checks internal storage for definitions that require a target transform, and either returns the original object or the transformed object.
    #>
    [CmdletBinding()]
    param (
        [Parameter(Mandatory)]
        $Target,

        [Parameter(Mandatory)]
        [string]
        $FunctionName,

        [Parameter(Mandatory)]
        [string]
        $ModuleName
    )

    if ($null -eq $Target) { return }

    $typeName = $Target.GetType().FullName.ToLower()

    if ([Sqlcollaborative.Dbatools.Message.MessageHost]::TargetTransforms.ContainsKey($typeName)) {
        $scriptBlock = [Sqlcollaborative.Dbatools.Message.MessageHost]::TargetTransforms[$typeName]
        try {
            $tempTarget = $ExecutionContext.InvokeCommand.InvokeScript($false, ([scriptblock]::Create($scriptBlock.ToString())), $null, $Target)
            return $tempTarget
        } catch {
            [Sqlcollaborative.Dbatools.Message.MessageHost]::WriteTransformError($_, $FunctionName, $ModuleName, $Target, "Target", ([System.Management.Automation.Runspaces.Runspace]::DefaultRunspace.InstanceId))
            return $Target
        }
    }

    if ($transform = [Sqlcollaborative.Dbatools.Message.MessageHost]::TargetTransformlist.Get($typeName, $ModuleName, $FunctionName)) {
        try {
            $tempTarget = $ExecutionContext.InvokeCommand.InvokeScript($false, ([scriptblock]::Create($transform.ScriptBlock.ToString())), $null, $Target)
            return $tempTarget
        } catch {
            [Sqlcollaborative.Dbatools.Message.MessageHost]::WriteTransformError($_, $FunctionName, $ModuleName, $Target, "Target", ([System.Management.Automation.Runspaces.Runspace]::DefaultRunspace.InstanceId))
            return $Target
        }
    }

    return $Target
}

tools\dbatools\internal\functions\message\Get-DbaMessageLevelModifier.ps1

function Get-DbaMessageLevelModifier {
    <#
    .SYNOPSIS
        Returns all registered message level modifiers with similar name.

    .DESCRIPTION
        Returns all registered message level modifiers with similar name.

        Message level modifiers are created using New-DbaMessageLevelModifier and allow dynamically modifying the actual message level written by commands.

    .PARAMETER Name
        Default: "*"
        A name filter - only commands that are similar to the filter will be returned.

    .EXAMPLE
        PS C:\> Get-DbaMessageLevelModifier

        Returns all message level filters

    .EXAMPLE
        PS C:\> Get-DbaMessageLevelModifier -Name "mymodule.*"

        Returns all message level filters that start with "mymodule."
    #>
    [CmdletBinding()]
    param (
        [string]
        $Name = "*"
    )

    ([Sqlcollaborative.Dbatools.Message.MessageHost]::MessageLevelModifiers.Values) | Where-Object Name -Like $Name
}

tools\dbatools\internal\functions\message\New-DbaMessageLevelModifier.ps1

function New-DbaMessageLevelModifier {
    <#
    .SYNOPSIS
        Allows modifying message levels by powerful filters.

    .DESCRIPTION
        Allows modifying message levels by powerful filters.

        This is designed to allow a developer to have more control over what is written how during the development process.
        It also allows a debug user to fine tune what he is shown.

        This functionality is NOT designed for default implementation within a module.
        Instead, set healthy message levels for your own messages and leave others to tend to their own levels.

        Note:
        Adding too many level modifiers may impact performance, use with discretion.

    .PARAMETER Name
        The name of the level modifier.
        Can be arbitrary, but must be unique. Not case sensitive.

    .PARAMETER Modifier
        The level modifier to apply.
        - Use a negative value to make a message more relevant
        - Use a positive value to make a message less relevant
        While not limited to this range, the original levels range from 1 through 9:
        - 1-3 : Written to host and debug by default
        - 4-6 : Written to verbose and debug by default
        - 7-9 : Internas, written only to debug

    .PARAMETER IncludeFunctionName
        Only messages from functions with one of these exact names will be considered.

    .PARAMETER ExcludeFunctionName
        Messages from functions with one of these exact names will be ignored.

    .PARAMETER IncludeModuleName
        Only messages from modules with one of these exact names will be considered.

    .PARAMETER ExcludeModuleName
        Messages from module with one of these exact names will be ignored.

    .PARAMETER IncludeTags
        Only messages that contain one of these tags will be considered.

    .PARAMETER ExcludeTags
        Messages that contain one of these tags will be ignored.

    .PARAMETER EnableException
        This parameters disables user-friendly warnings and enables the throwing of exceptions.
        This is less user friendly, but allows catching exceptions in calling scripts.

    .EXAMPLE
        PS C:\> New-DbaMessageLevelModifier -Name 'MyModule-Include' -Modifier -9 -IncludeModuleName MyModule
        PS C:\> New-DbaMessageLevelModifier -Name 'MyModule-Exclude' -Modifier 9 -ExcludeModuleName MyModule

        These settings will cause all messages from the module 'MyModule' to be highly prioritized and almost certainly written to host.
        It will also make it highly unlikely, that messages from other modules will even be considered for anything but the lowest level.

        This is useful when prioritizing your own module during development.
    #>
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseShouldProcessForStateChangingFunctions", "")]
    [CmdletBinding()]
    param (
        [Parameter(Mandatory)]
        [string]
        $Name,

        [Parameter(Mandatory)]
        [int]
        $Modifier,

        [string]
        $IncludeFunctionName,

        [string]
        $ExcludeFunctionName,

        [string]
        $IncludeModuleName,

        [string]
        $ExcludeModuleName,

        [string[]]
        $IncludeTags,

        [string[]]
        $ExcludeTags,

        [switch]
        $EnableException
    )

    if (Test-Bound -ParameterName IncludeFunctionName, ExcludeFunctionName, IncludeModuleName, ExcludeModuleName, IncludeTags, ExcludeTags -Not) {
        Stop-Function -Message "Must specify at least one condition in order to apply message level modifier!" -EnableException $EnableException -Category InvalidArgument
        return
    }

    $levelModifier = New-Object Sqlcollaborative.Dbatools.Message.MessageLevelModifier
    $levelModifier.Name = $Name.ToLower()
    $levelModifier.Modifier = $Modifier

    if (Test-Bound -ParameterName IncludeFunctionName) {
        $levelModifier.IncludeFunctionName = $IncludeFunctionName
    }

    if (Test-Bound -ParameterName ExcludeFunctionName) {
        $levelModifier.ExcludeFunctionName = $ExcludeFunctionName
    }

    if (Test-Bound -ParameterName IncludeModuleName) {
        $levelModifier.IncludeModuleName = $IncludeModuleName
    }

    if (Test-Bound -ParameterName ExcludeModuleName) {
        $levelModifier.ExcludeModuleName = $ExcludeModuleName
    }

    if (Test-Bound -ParameterName IncludeTags) {
        $levelModifier.IncludeTags = $IncludeTags
    }

    if (Test-Bound -ParameterName ExcludeTags) {
        $levelModifier.ExcludeTags = $ExcludeTags
    }

    [Sqlcollaborative.Dbatools.Message.MessageHost]::MessageLevelModifiers[$levelModifier.Name] = $levelModifier

    $levelModifier
}

tools\dbatools\internal\functions\Unregister-RemoteSessionConfiguration.ps1

function Unregister-RemoteSessionConfiguration {
    <#
    .SYNOPSIS
        Unregisters a PSSessionConfiguration on a remote machine
    .DESCRIPTION
        Unregisters a session previously created with Register-RemoteSessionConfiguration through WinRM.
    #>
    [CmdletBinding()]
    Param (
        [parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        $ComputerName,
        [parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [string]$Name,
        [pscredential]$Credential
    )
    begin {

    }
    process {
        $removeRunasSession = {
            Param (
                $Name
            )
            $existing = Get-PSSessionConfiguration -Name $Name -ErrorAction SilentlyContinue
            if ($null -eq $existing) {
                return [pscustomobject]@{ 'Name' = $Name ; 'Status' = 'Not found'; Successful = $true }
            } else {
                try {
                    Unregister-PSSessionConfiguration -Name $Name -Force -ErrorAction Stop -NoServiceRestart 3>$null
                    [pscustomobject]@{ 'Name' = $Name; 'Status' = 'Unregistered' ; Successful = $true }
                } catch {
                    return [pscustomobject]@{ 'Name' = $Name ; 'Status' = $_  ; Successful = $false}
                }
            }
        }

        try {
            $unregisterIt = Invoke-Command2 -ComputerName $ComputerName -Credential $Credential -ScriptBlock $removeRunasSession -ArgumentList @($Name) -Raw
        } catch {
            Stop-Function -Message "Failure during remote session configuration execution" -ErrorRecord $_ -EnableException $true
        }
        if ($unregisterIt) {
            Write-Message -Level Debug -Message "Configuration attempt returned the following status`: $($unregisterIt.Status)"
            if ($unregisterIt.Status -eq 'Unregistered') {
                Write-Message -Level Verbose -Message "Restarting WinRm service on $ComputerName"
                Restart-WinRMService -ComputerName $ComputerName -Credential $Credential
            }
            return $unregisterIt
        }
    }
}

tools\dbatools\internal\functions\Update-ServiceStatus.ps1

function Update-ServiceStatus {
    <#
    .SYNOPSIS
        Internal function. Sends start/stop request to a SQL Server service and wait for the result.

    .DESCRIPTION
        Accepts objects from Get-DbaService and performs a corresponding action.

    .PARAMETER Credential
        Credential object used to connect to the computer as a different user.

    .PARAMETER Timeout
        How long to wait for the start/stop request completion before moving on.

    .PARAMETER InputObject
        A collection of services from Get-DbaService

    .PARAMETER Action
        Start or stop.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .PARAMETER WhatIf
        Shows what would happen if the cmdlet runs. The cmdlet is not run.

    .PARAMETER Confirm
        Prompts you for confirmation before running the cmdlet.

    .NOTES
        Author: Kirill Kravtsov ( @nvarscar )
        Tags:
        dbatools PowerShell module (https://dbatools.io)
       Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        $InputObject = Get-DbaService -ComputerName sql1
        Update-ServiceStatus -InputObject $InputObject -Action 'stop' -Timeout 30
        Update-ServiceStatus -InputObject $InputObject -Action 'start' -Timeout 30

        Restarts SQL services on sql1

    .EXAMPLE
        $InputObject = Get-DbaService -ComputerName sql1
        $credential = Get-Credential
        Update-ServiceStatus -InputObject $InputObject -Action 'stop' -Timeout 0 -Credential $credential

        Stops SQL services on sql1 and waits indefinitely for them to stop. Uses $credential to authorize on the server.
    #>
    [CmdletBinding(SupportsShouldProcess)]
    param(
        [parameter(ValueFromPipeline, Mandatory)]
        [object[]]$InputObject,
        [parameter(Mandatory)]
        [string[]]$Action,
        [int]$Timeout = 60,
        [PSCredential] $Credential,
        [bool][Alias('Silent')]$EnableException
    )
    begin {
        $callStack = Get-PSCallStack
        if ($callStack.Length -gt 1) {
            $callerName = $callStack[1].Command
        } else {
            $callerName = $callStack[0].Command
        }
        #Prepare the service control script block
        $svcControlBlock = {
            $group = $_.Group
            $computerName = $_.Name
            $servicePriorityCollection = $group.ServicePriority | Select-Object -unique | Sort-Object -Property @{ Expression = { [int]$_ }; Descending = $action -ne 'stop' }
            foreach ($priority in $servicePriorityCollection) {
                $services = $group | Where-Object { $_.ServicePriority -eq $priority }
                $servicesToRestart = @()
                foreach ($service in $services) {
                    if ('dbatools.DbaSqlService' -in $service.PSObject.TypeNames) {
                        $cimObject = $service._CimObject
                        if (($cimObject.State -eq 'Running' -and $action -eq 'start') -or ($cimObject.State -eq 'Stopped' -and $action -eq 'stop')) {
                            $service | Add-Member -Force -NotePropertyName Status -NotePropertyValue 'Successful' -PassThru |
                                Add-Member -Force -NotePropertyName Message -NotePropertyValue "The service is already $actionText, no action required" -PassThru
                        } elseif ($cimObject.StartMode -eq 'Disabled' -and $action -in 'start', 'restart') {
                            $service | Add-Member -Force -NotePropertyName Status -NotePropertyValue 'Failed' -PassThru |
                                Add-Member -Force -NotePropertyName Message -NotePropertyValue "The service is disabled and cannot be $actionText" -PassThru
                        } else {
                            $servicesToRestart += $service
                        }
                    } else {
                        throw "Unknown object in pipeline - make sure to use Get-DbaService cmdlet"
                    }
                }
                #Set desired $action
                if ($action -in 'start', 'restart') {
                    $methodName = 'StartService'
                    $desiredState = 'Running'
                    $undesiredState = 'Stopped'
                } elseif ($action -eq 'stop') {
                    $methodName = 'StopService'
                    $desiredState = 'Stopped'
                    $undesiredState = 'Running'
                }
                $invokeResults = @()
                foreach ($service in $servicesToRestart) {
                    if ($Pscmdlet.ShouldProcess("Sending $action request to service $($service.ServiceName) on $($service.ComputerName)")) {
                        #Invoke corresponding CIM method
                        $invokeResult = Invoke-CimMethod -InputObject $service._CimObject -MethodName $methodName
                        $invokeResults += [psobject]@{
                            InvokeResult    = $invokeResult
                            ServiceState    = $invokeResult.State
                            ServiceExitCode = $invokeResult.ReturnValue
                            CheckPending    = $true
                            Service         = $service
                        }
                    }
                }

                $startTime = Get-Date
                if ($Pscmdlet.ShouldProcess("Waiting the services to $action on $computerName")) {
                    #Wait for the service to complete the action until timeout
                    while ($invokeResults.CheckPending -contains $true) {
                        foreach ($result in ($invokeResults | Where-Object CheckPending -eq $true)) {
                            try {
                                #Refresh Cim instance - not using Get-DbaCmObject because module is not loaded here, but it only refreshes existing object
                                $result.Service._CimObject = $result.Service._CimObject | Get-CimInstance
                            } catch {
                                $result.ServiceExitCode = -3
                                $result.ServiceState = 'Unknown'
                                $result.CheckPending = $false
                                continue
                            }
                            $result.ServiceState = $result.Service._CimObject.State
                            #Failed or succeeded
                            if ($result.ServiceExitCode -ne 0 -or $result.ServiceState -eq $desiredState) {
                                $result.CheckPending = $false
                                continue
                            }
                            #Failed after being in the Pending state
                            if ($result.CheckPending -and $result.ServiceState -eq $undesiredState) {
                                $result.ServiceExitCode = -2
                                $result.CheckPending = $false
                                continue
                            }
                            #Timed out
                            if ($timeout -gt 0 -and ((Get-Date) - $startTime).TotalSeconds -gt $timeout) {
                                $result.ServiceExitCode = -1
                                $result.CheckPending = $false
                                continue
                            }
                            #Still pending - leave CheckPending as is and run again
                        }
                        Start-Sleep -Milliseconds 200
                    }
                }
                foreach ($result in $invokeResults) {
                    #Add status
                    $status = switch ($result.ServiceExitCode) {
                        0 { 'Successful' }
                        10 { 'Successful '} #Already running - FullText service is started automatically
                        default { 'Failed' }
                    }
                    Add-Member -Force -InputObject $result.Service -NotePropertyName Status -NotePropertyValue $status
                    #Add error message
                    $errorMessageFromReturnValue = if ($result.ServiceExitCode -in 0..($errorCodes.Length - 1)) {
                        $errorCodes[$result.ServiceExitCode]
                    } else { "Unknown error." }
                    $message = switch ($result.ServiceExitCode) {
                        -2 { "The service failed to $action." }
                        -1 { "The attempt to $action the service has timed out." }
                        0 { "Service was successfully $actionText." }
                        default { "The attempt to $action the service returned the following error: $errorMessageFromReturnValue" }
                    }
                    Add-Member -Force -InputObject $result.Service -NotePropertyName Message -NotePropertyValue $message
                    # Refresh service state for the object
                    if ($result.ServiceState) { $result.Service.State = $result.ServiceState }
                    $result
                }
            }
        }

        $actionText = switch ($action) { stop { 'stopped' }; start { 'started' }; restart { 'restarted' } }
        $errorCodes = Get-DbaServiceErrorMessage
    }

    process {
        #Group services for each computer
        $serviceComputerGroup = $InputObject | Group-Object -Property ComputerName
        foreach ($group in $serviceComputerGroup) {
            Write-Message -Message "Getting CIM objects from computer $($group.Name)"
            $serviceNames = $group.Group.ServiceName -join "' OR name = '"
            try {
                $svcCim = Get-DbaCmObject -ComputerName $group.Name -Namespace "root\cimv2" -query "SELECT * FROM Win32_Service WHERE name = '$serviceNames'" -Credential $credential
            } catch {
                Stop-Function -EnableException $EnableException -FunctionName $callerName -Message ("The attempt to get CIM session for the services on $($group.Name) returned the following error: " + ($_.Exception.Message -join ' ')) -Category ConnectionError -ErrorRecord $_
            }
            foreach ($service in $group.Group) {
                if ($cimObject = ($svcCim | Where-Object Name -eq $service.ServiceName)) {
                    Add-Member -Force -InputObject $service -NotePropertyName _CimObject -NotePropertyValue $cimObject
                } else {
                    Stop-Function -Message "Failed to retrieve service name $($service.ServiceName) from the CIM object collection - the service will not be processed" -Continue -Target $group.Name
                }
            }
        }
        if ($Pscmdlet.ShouldProcess("Running the following service action: $action")) {
            if ($serviceComputerGroup) {
                try {
                    $serviceComputerGroup | Invoke-Parallel -ScriptBlock $svcControlBlock -Throttle 50 -ImportVariables | ForEach-Object {
                        if ($_.ServiceExitCode) {
                            $target = "$($_.Service.ServiceName) on $($_.Service.ComputerName)"
                            Write-Message -Level Warning -Message "($target) $($_.Service.Message)" -Target $target
                            if ($_.Service.ServiceType -eq 'Engine' -and $_.ServiceExitCode -eq 3) {
                                Write-Message -Level Warning -Message "($target) Run the command with '-Force' switch to force the restart of a dependent SQL Agent" -Target $target
                            }
                        }
                        $_.Service | Select-DefaultView -Property ComputerName, ServiceName, InstanceName, ServiceType, State, Status, Message
                    }
                } catch {
                    Stop-Function -Message "Multi-threaded execution returned an error" -ErrorRecord $_ -EnableException $EnableException -FunctionName $callerName
                }
            }
        }
    }
    end {
    }
}

tools\dbatools\internal\functions\message\Register-DbaMessageEvent.ps1

function Register-DbaMessageEvent {
    <#
    .SYNOPSIS
        Registers an event to when a message is written.

    .DESCRIPTION
        Registers an event to when a message is written.
        These events will fire whenever the written message fulfills the specified filter criteria.

        This allows integrating direct alerts and reactions to messages as they occur.

        Warnings:
        - Adding many subscriptions can impact overall performance, even without triggering.
        - Events are executed synchronously. executing complex operations may introduce a significant delay to the command execution.

        It is recommended to push processing that involves outside resources to a separate runspace, then use the event to pass the object as trigger.
        The TaskEngine component may prove to be just what is needed to accomplish this.

    .PARAMETER Name
        The name of the subscription.
        Each subscription must have a name, subscriptions of equal name will overwrite each other.
        This is in order to avoid having runspace uses explode the number of subscriptions on each invocation.

    .PARAMETER ScriptBlock
        The scriptblock to execute.
        It will receive the message entry (as returned by Get-DbatoolsLog) as its sole argument.

    .PARAMETER MessageFilter
        Filter by message content. Understands wildcards, but not regex.

    .PARAMETER ModuleNameFilter
        Filter by Name of the module, from which the message comes. Understands wildcards, but not regex.

    .PARAMETER FunctionNameFilter
        Filter by Name of the function, from which the message comes. Understands wildcards, but not regex.

    .PARAMETER TargetFilter
        Filter by target object. Performs equality comparison on an object level.

    .PARAMETER LevelFilter
        Include only messages of the specified levels.

    .PARAMETER TagFilter
        Only include messages with any of the specified tags.

    .PARAMETER RunspaceFilter
        Only include messages which were written by the specified runspace.
        You can find out the current runspace ID by running this:
        [System.Management.Automation.Runspaces.Runspace]::DefaultRunspace.InstanceId
        You can retrieve the primary runspace - the Guid used by the runspace the user sees - by running this:
        [Sqlcollaborative.Dbatools.Utility.UtilityHost]::PrimaryRunspace

    .EXAMPLE
        PS C:\> Register-DbaMessageEvent -Name 'Mymodule.OffloadTrigger' -ScriptBlock $ScriptBlock -Tag 'engine' -Module 'MyModule' -Level Warning

        Registers an event subscription ...
        - Under the name 'Mymodule.OffloadTrigger' ...
        - To execute $ScriptBlock ...
        - Whenever a message is written with the tag 'engine' by the module 'MyModule' at the level 'Warning'
    #>
    [CmdletBinding(PositionalBinding = $false)]
    param (
        [Parameter(Mandatory)]
        [string]
        $Name,

        [Parameter(Mandatory)]
        [System.Management.Automation.ScriptBlock]
        $ScriptBlock,

        [string]
        $MessageFilter,

        [string]
        $ModuleNameFilter,

        [string]
        $FunctionNameFilter,

        $TargetFilter,

        [Sqlcollaborative.Dbatools.Message.MessageLevel[]]
        $LevelFilter,

        [string[]]
        $TagFilter,

        [System.Guid]
        $RunspaceFilter
    )

    $newName = $Name.ToLower()
    $eventSubscription = New-Object Sqlcollaborative.Dbatools.Message.MessageEventSubscription
    $eventSubscription.Name = $newName
    $eventSubscription.ScriptBlock = $ScriptBlock

    if (Test-Bound -ParameterName MessageFilter) {
        $eventSubscription.MessageFilter = $MessageFilter
    }

    if (Test-Bound -ParameterName ModuleNameFilter) {
        $eventSubscription.ModuleNameFilter = $ModuleNameFilter
    }

    if (Test-Bound -ParameterName FunctionNameFilter) {
        $eventSubscription.FunctionNameFilter = $FunctionNameFilter
    }

    if (Test-Bound -ParameterName TargetFilter) {
        $eventSubscription.TargetFilter = $TargetFilter
    }

    if (Test-Bound -ParameterName LevelFilter) {
        $eventSubscription.LevelFilter = $LevelFilter
    }

    if (Test-Bound -ParameterName TagFilter) {
        $eventSubscription.TagFilter = $TagFilter
    }

    if (Test-Bound -ParameterName RunspaceFilter) {
        $eventSubscription.RunspaceFilter = $RunspaceFilter
    }

    [Sqlcollaborative.Dbatools.Message.MessageHost]::Events[$newName] = $eventSubscription
}

tools\dbatools\internal\functions\message\Register-DbaMessageTransform.ps1

function Register-DbaMessageTransform {
    <#
    .SYNOPSIS
        Registers a scriptblock that can transform message content.

    .DESCRIPTION
        Registers a scriptblock that can transform message content.
        This can be used to convert some kinds of input. Specifically:

        Target:
        When specifying a target, this target may require some conversion.
        For example, an object containing a live connection may need to have a static copy stored instead,
        as otherwise its export on a different runspace may cause access violations.

        Exceptions:
        Some exceptions may need transforming.
        For example some APIs might wrap the actual exception into a common wrapper.
        In this scenario you may want the actual exception in order to provide more specific information.

        In all instances, the scriptblock will be called, receiving only the relevant object as its sole input.

        Note: This transformation is performed synchronously on the active runspace. Complex scriptblocks may delay execution times when a matching object is passed.

    .PARAMETER TargetType
        The full typename of the target object to apply the scriptblock to.
        All objects of that typename will be processed through that scriptblock.

    .PARAMETER ExceptionType
        The full typename of the exception object to apply the scriptblock to.
        All objects of that typename will be processed through that scriptblock.
        Note: In case of error records, the type of the Exception Property is inspected. The error record as a whole will not be touched, except for having its exception exchanged.

    .PARAMETER ScriptBlock
        The scriptblock that performs the transformation.

    .PARAMETER TargetTypeFilter
        A filter for the typename of the target object to transform.
        Supports wildcards, but not regex.
        WARNING: Adding too many filter-type transforms may impact overall performance, try to avoid using them!

    .PARAMETER ExceptionTypeFilter
        A filter for the typename of the exception object to transform.
        Supports wildcards, but not regex.
        WARNING: Adding too many filter-type transforms may impact overall performance, try to avoid using them!

    .PARAMETER FunctionNameFilter
        Default: "*"
        Allows filtering by function name, in order to consider whether the function is affected.
        Supports wildcards, but not regex.
        WARNING: Adding too many filter-type transforms may impact overall performance, try to avoid using them!

    .PARAMETER ModuleNameFilter
        Default: "*"
        Allows filtering by module name, in order to consider whether the function is affected.
        Supports wildcards, but not regex.
        WARNING: Adding too many filter-type transforms may impact overall performance, try to avoid using them!

    .EXAMPLE
        PS C:\> Register-DbaMessageTransform -TargetType 'mymodule.category.classname' -ScriptBlock $ScriptBlock

        Whenever a target object of type 'mymodule.category.classname' is specified, invoke $ScriptBlock (with the object as sole argument) and store the result as target instead.

    .EXAMPLE
        PS C:\> Register-DbaMessageTransform -ExceptionType 'mymodule.category.exceptionname' -ScriptBlock $ScriptBlock

        Whenever an exception or error record of type 'mymodule.category.classname' is specified, invoke $ScriptBlock (with the object as sole argument) and store the result as exception instead.
        If the full error record is specified, only the updated exception will be inserted

    .EXAMPLE
        PS C:\> Register-DbaMessageTransform -TargetTypeFilter 'mymodule.category.*' -ScriptBlock $ScriptBlock

        Adds a transform for all target objects that are of a type whose full name starts with 'mymodule.category.'
        All target objects matching that typename will be run through the specified scriptblock, which in return generates the new target object.
    #>
    [CmdletBinding(PositionalBinding = $false)]
    param (
        [Parameter(Mandatory, ParameterSetName = "Target")]
        [string]
        $TargetType,

        [Parameter(Mandatory, ParameterSetName = "Exception")]
        [string]
        $ExceptionType,

        [Parameter(Mandatory)]
        [ScriptBlock]
        $ScriptBlock,

        [Parameter(Mandatory, ParameterSetName = "TargetFilter")]
        [string]
        $TargetTypeFilter,

        [Parameter(Mandatory, ParameterSetName = "ExceptionFilter")]
        [string]
        $ExceptionTypeFilter,

        [Parameter(ParameterSetName = "TargetFilter")]
        [Parameter(ParameterSetName = "ExceptionFilter")]
        $FunctionNameFilter = "*",

        [Parameter(ParameterSetName = "TargetFilter")]
        [Parameter(ParameterSetName = "ExceptionFilter")]
        $ModuleNameFilter = "*"
    )

    process {
        if ($TargetType) { [Sqlcollaborative.Dbatools.Message.MessageHost]::TargetTransforms[$TargetType.ToLower()] = $ScriptBlock }
        if ($ExceptionType) { [Sqlcollaborative.Dbatools.Message.MessageHost]::ExceptionTransforms[$ExceptionType.ToLower()] = $ScriptBlock }

        if ($TargetTypeFilter) {
            $condition = New-Object Sqlcollaborative.Dbatools.Message.TransformCondition($TargetTypeFilter, $ModuleNameFilter, $FunctionNameFilter, $ScriptBlock, "Target")
            [Sqlcollaborative.Dbatools.Message.MessageHost]::TargetTransformList.Add($condition)
        }

        if ($ExceptionTypeFilter) {
            $condition = New-Object Sqlcollaborative.Dbatools.Message.TransformCondition($ExceptionTypeFilter, $ModuleNameFilter, $FunctionNameFilter, $ScriptBlock, "Exception")
            [Sqlcollaborative.Dbatools.Message.MessageHost]::ExceptionTransformList.Add($condition)
        }
    }
}

tools\dbatools\internal\functions\Update-SqlPermission.ps1

function Update-SqlPermission {
    <#
        .SYNOPSIS
            Internal function. Updates permission sets, roles, database mappings on server and databases
        .PARAMETER SourceServer
            Source Server
        .PARAMETER SourceLogin
            Source login
        .PARAMETER DestServer
            Destination Server
        .PARAMETER DestLogin
            Destination Login
        .PARAMETER EnableException
            Use this switch to disable any kind of verbose messages
    #>
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseSingularNouns", "")]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseShouldProcessForStateChangingFunctions", "")]
    [CmdletBinding(SupportsShouldProcess)]
    param (
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [object]$SourceServer,
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [object]$SourceLogin,
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [object]$DestServer,
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [object]$DestLogin,
        [Alias('Silent')]
        [switch]$EnableException
    )

    $destination = $DestServer.DomainInstanceName
    $source = $SourceServer.DomainInstanceName
    $userName = $SourceLogin.Name

    # Server Roles: sysadmin, bulklogin, etc
    foreach ($role in $SourceServer.Roles) {
        $roleName = $role.Name
        $destRole = $DestServer.Roles[$roleName]

        if ($null -ne $destRole) {
            try {
                $destRoleMembers = $destRole.EnumMemberNames()
            } catch {
                $destRoleMembers = $destRole.EnumServerRoleMembers()
            }
        }

        try {
            $roleMembers = $role.EnumMemberNames()
        } catch {
            $roleMembers = $role.EnumServerRoleMembers()
        }

        if ($roleMembers -contains $userName) {
            if ($null -ne $destRole) {
                if ($Pscmdlet.ShouldProcess($destination, "Adding $userName to $roleName server role.")) {
                    try {
                        $destRole.AddMember($userName)
                        Write-Message -Level Verbose -Message "Adding $userName to $roleName server role on $destination successfully performed."
                    } catch {
                        Stop-Function -Message "Failed to add $userName to $roleName server role on $destination." -Target $role -ErrorRecord $_
                    }
                }
            }
        }

        # Remove for Syncs
        if ($roleMembers -notcontains $userName -and $destRoleMembers -contains $userName -and $null -ne $destRole) {
            if ($Pscmdlet.ShouldProcess($destination, "Adding $userName to $roleName server role.")) {
                try {
                    $destRole.DropMember($userName)
                    Write-Message -Level Verbose -Message "Removing $userName from $destRoleName server role on $destination successfully performed."
                } catch {
                    Stop-Function -Message "Failed to remove $userName from $destRoleName server role on $destination." -Target $role -ErrorRecord $_
                }
            }
        }
    }

    $ownedJobs = $SourceServer.JobServer.Jobs | Where-Object OwnerLoginName -eq $userName
    foreach ($ownedJob in $ownedJobs) {
        if ($null -ne $DestServer.JobServer.Jobs[$ownedJob.Name]) {
            if ($Pscmdlet.ShouldProcess($destination, "Changing of job owner to $userName for $($ownedJob.Name).")) {
                try {
                    $destOwnedJob = $DestServer.JobServer.Jobs | Where-Object { $_.Name -eq $ownedJobs.Name }
                    $destOwnedJob.Set_OwnerLoginName($userName)
                    $destOwnedJob.Alter()
                    Write-Message -Level Verbose -Message "Changing job owner to $userName for $($ownedJob.Name) on $destination successfully performed."
                } catch {
                    Stop-Function -Message "Failed to change job owner for $($ownedJob.Name) on $destination." -Target $ownedJob -ErrorRecord $_
                }
            }
        }
    }

    if ($SourceServer.VersionMajor -ge 9 -and $DestServer.VersionMajor -ge 9) {
        <#
            These operations are only supported by SQL Server 2005 and above.
            Securables: Connect SQL, View any database, Administer Bulk Operations, etc.
        #>

        $perms = $SourceServer.EnumServerPermissions($userName)
        foreach ($perm in $perms) {
            $permState = $perm.PermissionState
            if ($permState -eq "GrantWithGrant") {
                $grantWithGrant = $true;
                $permState = "grant"
            } else {
                $grantWithGrant = $false
            }

            $permSet = New-Object Microsoft.SqlServer.Management.Smo.ServerPermissionSet($perm.PermissionType)
            if ($Pscmdlet.ShouldProcess($destination, "$permState on $($perm.PermissionType) for $userName.")) {
                try {
                    $DestServer.PSObject.Methods[$permState].Invoke($permSet, $userName, $grantWithGrant)
                    Write-Message -Level Verbose -Message "$permState $($perm.PermissionType) to $userName on $destination successfully performed."
                } catch {
                    Stop-Function -Message "Failed to $permState $($perm.PermissionType) to $userName on $destination." -Target $perm -ErrorRecord $_
                }
            }

            # for Syncs
            $destPerms = $DestServer.EnumServerPermissions($userName)
            foreach ($perm in $destPerms) {
                $permState = $perm.PermissionState
                $sourcePerm = $perms | Where-Object { $_.PermissionType -eq $perm.PermissionType -and $_.PermissionState -eq $permState }

                if ($null -eq $sourcePerm) {
                    if ($Pscmdlet.ShouldProcess($destination, "Revoking $($perm.PermissionType) for $userName.")) {
                        try {
                            $permSet = New-Object Microsoft.SqlServer.Management.Smo.ServerPermissionSet($perm.PermissionType)

                            if ($permState -eq "GrantWithGrant") {
                                $grantWithGrant = $true;
                                $permState = "grant"
                            } else {
                                $grantWithGrant = $false
                            }

                            $DestServer.PSObject.Methods["Revoke"].Invoke($permSet, $userName, $false, $grantWithGrant)
                            Write-Message -Level Verbose -Message "Revoking $($perm.PermissionType) for $userName on $destination successfully performed."
                        } catch {
                            Stop-Function -Message "Failed to revoke $($perm.PermissionType) from $userName on $destination." -Target $perm -ErrorRecord $_
                        }
                    }
                }
            }
        }

        # Credential mapping. Credential removal not currently supported for Syncs.
        $loginCredentials = $SourceServer.Credentials | Where-Object { $_.Identity -eq $SourceLogin.Name }
        foreach ($credential in $loginCredentials) {
            if ($null -eq $DestServer.Credentials[$credential.Name]) {
                if ($Pscmdlet.ShouldProcess($destination, "Creating credential $($credential.Name) for $userName.")) {
                    try {
                        $newCred = New-Object Microsoft.SqlServer.Management.Smo.Credential($DestServer, $credential.Name)
                        $newCred.Identity = $SourceLogin.Name
                        $newCred.Create()
                        Write-Message -Level Verbose -Message "Creating credential $($credential.Name) for $userName on $destination successfully performed."
                    } catch {
                        Stop-Function -Message "Failed to create credential $($credential.Name) for $userName on $destination." -Target $credential -ErrorRecord $_
                    }
                }
            }
        }
    }

    if ($DestServer.VersionMajor -lt 9) {
        Write-Message -Level Warning -Message "SQL Server 2005 or greater required for database mappings.";
        continue
    }

    # For Sync, if info doesn't exist in EnumDatabaseMappings, then no big deal.
    foreach ($db in $DestLogin.EnumDatabaseMappings()) {
        $dbName = $db.DbName
        $destDb = $DestServer.Databases[$dbName]
        $sourceDb = $SourceServer.Databases[$dbName]
        $dbUsername = $db.Username;
        $dbLogin = $db.LoginName

        if ($null -ne $sourceDb) {
            if (-not $sourceDb.IsAccessible) {
                Write-Message -Level Verbose -Message "Database [$($sourceDb.Name)] is not accessible on $source. Skipping."
                continue
            }
            if (-not $destDb.IsAccessible) {
                Write-Message -Level Verbose -Message "Database [$($sourceDb.Name)] is not accessible on destination. Skipping."
                continue
            }
            if ((Get-DbaAgDatabase -SqlInstance $DestServer -Database $dbName -ErrorAction Ignore -WarningAction SilentlyContinue)) {
                Write-Message -Level Verbose -Message "Database [$dbName] is part of an availability group. Skipping."
                continue
            }
            if ($null -eq $sourceDb.Users[$dbUsername] -and $null -eq $destDb.Users[$dbUsername]) {
                if ($Pscmdlet.ShouldProcess($destination, "Dropping user $dbUsername from $dbName.")) {
                    try {
                        $destDb.Users[$dbUsername].Drop()
                        Write-Message -Level Verbose -Message "Dropping user $dbUsername (login: $dbLogin) from $dbName on destination successfully performed."
                        Write-Message -Level Verbose -Message "Any schema in $dbaName owned by $dbUsername may still exist."
                    } catch {
                        Stop-Function -Message "Failed to drop $dbUsername (login: $dbLogin) from $dbName on destination." -Target $db -ErrorRecord $_
                    }
                }
            }

            # Remove user from role. Role removal not currently supported for Syncs.
            # TODO: reassign if dbo, application roles
            foreach ($destRole in $destDb.Roles) {
                $destRoleName = $destRole.Name
                $sourceRole = $sourceDb.Roles[$destRoleName]
                if ($null -eq $sourceRole) {
                    if ($sourceRole.EnumMembers() -notcontains $dbUsername -and $destRole.EnumMembers() -contains $dbUsername) {
                        if ($dbUsername -ne "dbo") {
                            if ($Pscmdlet.ShouldProcess($destination, "Dropping user $userName from $destRoleName database role in $dbName.")) {
                                try {
                                    $destRole.DropMember($dbUsername)
                                    $destDb.Alter()
                                    Write-Message -Level Verbose -Message "Dropping user $dbUsername (login: $dbLogin) from $destRoleName database role in $dbName on $destination successfully performed."
                                } catch {
                                    Stop-Function -Message "Failed to remove $dbUsername (login: $dbLogin) from $destRoleName database role in $dbName on $destination." -Target $destRole -ErrorRecord $_
                                }
                            }
                        }
                    }
                }
            }

            # Remove Connect, Alter Any Assembly, etc
            $destPerms = $destDb.EnumDatabasePermissions($userName)
            $perms = $sourceDb.EnumDatabasePermissions($userName)
            # for Syncs
            foreach ($perm in $destPerms) {
                $permState = $perm.PermissionState
                $sourcePerm = $perms | Where-Object { $_.PermissionType -eq $perm.PermissionType -and $_.PermissionState -eq $permState }
                if ($null -eq $sourcePerm) {
                    if ($Pscmdlet.ShouldProcess($destination, "Revoking $($perm.PermissionType) from $userName in $dbName.")) {
                        try {
                            $permSet = New-Object Microsoft.SqlServer.Management.Smo.DatabasePermissionSet($perm.PermissionType)

                            if ($permState -eq "GrantWithGrant") {
                                $grantWithGrant = $true;
                                $permState = "grant"
                            } else {
                                $grantWithGrant = $false
                            }

                            $destDb.PSObject.Methods["Revoke"].Invoke($permSet, $userName, $false, $grantWithGrant)
                            Write-Message -Level Verbose -Message "Revoking $($perm.PermissionType) from $userName in $dbName on $destination successfully performed."
                        } catch {
                            Stop-Function -Message "Failed to revoke $($perm.PermissionType) from $userName in $dbName on $destination." -Target $perm -ErrorRecord $_
                        }
                    }
                }
            }
        }
    }

    # Adding database mappings and securables
    foreach ($db in $SourceLogin.EnumDatabaseMappings()) {
        $dbName = $db.DbName
        $destDb = $DestServer.Databases[$dbName]
        $sourceDb = $SourceServer.Databases[$dbName]
        $dbUsername = $db.Username;
        $dbLogin = $db.LoginName

        if ($null -ne $destDb) {
            if (-not $destDb.IsAccessible) {
                Write-Message -Level Verbose -Message "Database [$dbName] is not accessible. Skipping."
                continue
            }

            if ((Get-DbaAgDatabase -SqlInstance $DestServer -Database $dbName -ErrorAction Ignore -WarningAction SilentlyContinue)) {
                Write-Message -Level Verbose -Message "Database [$dbName] is part of an availability group. Skipping."
                continue
            }
            if ($null -eq $destDb.Users[$dbUsername]) {
                if ($Pscmdlet.ShouldProcess($destination, "Adding $dbUsername to $dbName.")) {
                    $sql = $SourceServer.Databases[$dbName].Users[$dbUsername].Script() | Out-String
                    try {
                        $destDb.ExecuteNonQuery($sql)
                        Write-Message -Level Verbose -Message "Adding user $dbUsername (login: $dbLogin) to $dbName successfully performed."
                    } catch {
                        Stop-Function -Message "Failed to add $dbUsername (login: $dbLogin) to $dbName on $destination." -Target $db -ErrorRecord $_
                    }
                }
            }

            # Db owner
            if ($sourceDb.Owner -eq $userName) {
                if ($Pscmdlet.ShouldProcess($destination, "Changing $dbName dbowner to $userName.")) {
                    try {
                        $result = Update-SqlDbOwner $SourceServer $DestServer -DbName $dbName
                        if ($result -eq $true) {
                            Write-Message -Level Verbose -Message "Changed $($destDb.Name) owner to $($sourceDb.owner)."
                        } else {
                            Write-Message -Level Warning -Message "Failed to update $($destDb.Name) owner to $($sourceDb.owner)."
                        }
                    } catch {
                        Write-Message -Level Warning -Message "Failed to update $($destDb.Name) owner to $($sourceDb.owner)."
                    }
                }
            }

            # Database Roles: db_owner, db_datareader, etc
            foreach ($role in $sourceDb.Roles) {
                if ($role.EnumMembers() -contains $userName) {
                    $roleName = $role.Name
                    $destDbRole = $destDb.Roles[$roleName]

                    if ($null -ne $destDbRole -and $dbUsername -ne "dbo" -and $destDbRole.EnumMembers() -notcontains $userName) {
                        if ($Pscmdlet.ShouldProcess($destination, "Adding $userName to $roleName database role in $dbName.")) {
                            try {
                                $destDbRole.AddMember($userName)
                                $destDb.Alter()
                                Write-Message -Level Verbose -Message "Adding $userName to $roleName database role in $dbName on $destination successfully performed."
                            } catch {
                                Stop-Function -Message "Failed to add $userName to $roleName database role in $dbName on $destination." -Target $role -ErrorRecord $_
                            }
                        }
                    }
                }
            }

            # Connect, Alter Any Assembly, etc
            $perms = $sourceDb.EnumDatabasePermissions($userName)
            foreach ($perm in $perms) {
                $permState = $perm.PermissionState
                if ($permState -eq "GrantWithGrant") {
                    $grantWithGrant = $true;
                    $permState = "grant"
                } else {
                    $grantWithGrant = $false
                }
                $permSet = New-Object Microsoft.SqlServer.Management.Smo.DatabasePermissionSet($perm.PermissionType)

                if ($Pscmdlet.ShouldProcess($destination, "$permState on $($perm.PermissionType) for $userName on $dbName")) {
                    try {
                        $destDb.PSObject.Methods[$permState].Invoke($permSet, $userName, $grantWithGrant)
                        Write-Message -Level Verbose -Message "$permState on $($perm.PermissionType) to $userName on $dbName on $destination successfully performed."
                    } catch {
                        Stop-Function -Message "Failed to perform $permState on $($perm.PermissionType) to $userName on $dbName on $destination." -Target $perm -ErrorRecord $_
                    }
                }
            }
        }
    }
}

tools\dbatools\internal\functions\utility\Join-DbaPath.ps1

function Join-DbaPath
{
<#
    .SYNOPSIS
        Performs multisegment path joins.
    
    .DESCRIPTION
        Performs multisegment path joins.
    
    .PARAMETER Path
        The basepath to join on.
    
    .PARAMETER Child
        Any number of child paths to add.
    
    .EXAMPLE
        PS C:\> Join-DbaPath -Path 'C:\temp' 'Foo' 'Bar'
    
        Returns 'C:\temp\Foo\Bar' on windows.
        Returns 'C:/temp/Foo/Bar' on non-windows.
#>
    [CmdletBinding()]
    param (
        [Parameter(Mandatory = $true, Position = 0)]
        [string]
        $Path,
        
        [Parameter(ValueFromRemainingArguments = $true)]
        [string[]]
        $Child
    )
    
    $resultingPath = $Path
    if (($PSVersionTable.PSVersion.Major -ge 6) -and (-not $script:isWindows))
    {
        $resultingPath = $resultingPath.Replace("\", "/")
    }
    else { $resultingPath = $resultingPath.Replace("/", "\") }
    
    foreach ($childItem in $Child)
    {
        $resultingPath = Join-Path -Path $resultingPath -ChildPath $childItem
    }
    
    $resultingPath
}

tools\dbatools\internal\functions\utility\Resolve-DbaPath.ps1

function Resolve-DbaPath
{
<#
    .SYNOPSIS
        Resolves a path.
    
    .DESCRIPTION
        Resolves a path.
        Will try to resolve to paths including some basic path validation and resolution.
        Will fail if the path cannot be resolved (so an existing path must be reached at).
    
    .PARAMETER Path
        The path to validate.
    
    .PARAMETER Provider
        Ensure the path is of the expected provider.
        Allows ensuring one does not operate in the wrong provider.
        Common providers include the filesystem, the registry or the active directory.
    
    .PARAMETER SingleItem
        Ensure the path should resolve to a single path only.
        This may - intentionally or not - trip up wildcard paths.
    
    .PARAMETER NewChild
        Assumes one wishes to create a new child item.
        The parent path will be resolved and must validate true.
        The final leaf will be treated as a leaf item that does not exist yet.
    
    .EXAMPLE
        PS C:\> Resolve-DbaPath -Path report.log -Provider FileSystem -NewChild -SingleItem
    
        Ensures the resolved path is a FileSystem path.
        This will resolve to the current folder and the file report.log.
        Will not ensure the file exists or doesn't exist.
        If the current path is in a different provider, it will throw an exception.
    
    .EXAMPLE
        PS C:\> Resolve-DbaPath -Path ..\*
    
        This will resolve all items in the parent folder, whatever the current path or drive might be.
#>
    [CmdletBinding()]
    param (
        [Parameter(Mandatory = $true, Position = 0, ValueFromPipeline = $true)]
        [string[]]
        $Path,
        
        [string]
        $Provider,
        
        [switch]
        $SingleItem,
        
        [switch]
        $NewChild
    )
    
    process
    {
        foreach ($inputPath in $Path)
        {
            if ($inputPath -eq ".")
            {
                $inputPath = (Get-Location).Path
            }
            if ($NewChild)
            {
                $parent = Split-Path -Path $inputPath
                $child = Split-Path -Path $inputPath -Leaf
                
                try
                {
                    if (-not $parent) { $parentPath = Get-Location -ErrorAction Stop }
                    else { $parentPath = Resolve-Path $parent -ErrorAction Stop }
                }
                catch { Stop-Function -Message "Failed to resolve path" -ErrorRecord $_ -EnableException $true }
                
                if ($SingleItem -and (($parentPath | Measure-Object).Count -gt 1))
                {
                    Stop-Function -Message "Could not resolve to a single parent path!" -EnableException $true
                }
                
                if ($Provider -and ($parentPath.Provider.Name -ne $Provider))
                {
                    Stop-Function -Message "Resolved provider is $($parentPath.Provider.Name) when it should be $($Provider)" -EnableException $true
                }
                
                foreach ($parentItem in $parentPath)
                {
                    Join-Path $parentItem.ProviderPath $child
                }
            }
            else
            {
                try { $resolvedPaths = Resolve-Path $inputPath -ErrorAction Stop }
                catch { Stop-Function -Message "Failed to resolve path" -ErrorRecord $_ -EnableException $true }
                
                if ($SingleItem -and (($resolvedPaths | Measure-Object).Count -gt 1))
                {
                    Stop-Function -Message "Could not resolve to a single parent path!" -EnableException $true
                }
                
                if ($Provider -and ($resolvedPaths.Provider.Name -ne $Provider))
                {
                    Stop-Function -Message "Resolved provider is $($resolvedPaths.Provider.Name) when it should be $($Provider)" -EnableException $true
                }
                
                $resolvedPaths.ProviderPath
            }
        }
    }
}

tools\dbatools\internal\functions\Where-DbaObject.ps1

function global:Where-DbaObject {
    <#
        .SYNOPSIS
            A slightly more efficient filter function than Where-Object.

        .DESCRIPTION
            A slightly more efficient filter function than Where-Object.
            In case multiple filters are set, any one hit will work.

        .PARAMETER InputObject
            The object to process.

        .PARAMETER PropertyName
            Whether a property should be tested, rather than the input object itself.

        .PARAMETER Equals
            Tests for equality.

        .PARAMETER NotEquals
            Tests for inequality.

        .PARAMETER Like
            Tests for similarity.

        .PARAMETER NotLike
            Tests for non-similarity.

        .PARAMETER In
            Tests, whether the input is contained in a specified list.

        .PARAMETER NotIn
            Tests, whether the input is not contained in a specified list.

        .PARAMETER Match
            Tests for regex match.

        .PARAMETER NotMatch
            Tests for regex non-match.

        .EXAMPLE
            dir | Where-DbaObject Length -gt 1024

            Scans the current folder and filters out all files smaller then 1024 bytes

        .EXAMPLE
            "foo","bar" | Where-DbaObject -match "o"

            Filters out all strings that don't contain the letter "o"
       #>
    [CmdletBinding()]
    param (
        [Parameter(ValueFromPipeline, Mandatory)]
        [object]
        $InputObject,

        [Parameter(Position = 0)]
        [Alias('Property')]
        [string]
        $PropertyName,

        [Alias('Eq')]
        [object]
        $Equals,

        [Alias('Ne')]
        [object]
        $NotEquals,

        [object]
        $Like,

        [object]
        $NotLike,

        [object]
        $In,

        [object]
        $NotIn,

        [object]
        $Match,

        [object]
        $NotMatch
    )

    begin {
        $TestEquals = Test-Bound -ParameterName Equals
        $TestNotEquals = Test-Bound -ParameterName NotEquals
        $TestLike = Test-Bound -ParameterName Like
        $TestNotLike = Test-Bound -ParameterName NotLike
        $TestIn = Test-Bound -ParameterName In
        $TestNotIn = Test-Bound -ParameterName NotIn
        $TestMatch = Test-Bound -ParameterName Match
        $TestNotMatch = Test-Bound -ParameterName NotMatch

        $TestObject = -not ($TestEquals -or $TestNotEquals -or $TestLike -or $TestNotLike -or $TestIn -or $TestNotIn -or $TestMatch -or $TestNotMatch)

        $TestProperty = Test-Bound -ParameterName PropertyName
    }
    process {
        foreach ($item in $InputObject) {
            #region Test Property
            if ($TestProperty) {
                if ($TestObject -and $item.$PropertyName) { return $item }

                if ($TestEquals -and ($item.$PropertyName -eq $Equals)) { return $item }
                if ($TestNotEquals -and ($item.$PropertyName -ne $NotEquals)) { return $item }
                if ($TestLike -and ($item.$PropertyName -like $Like)) { return $item }
                if ($TestNotLike -and ($item.$PropertyName -notlike $NotLike)) { return $item }
                if ($TestIn -and ($item.$PropertyName -In $In)) { return $item }
                if ($TestNotIn -and ($item.$PropertyName -NotIn $NotIn)) { return $item }
                if ($TestMatch -and ($item.$PropertyName -Match $Match)) { return $item }
                if ($TestNotMatch -and ($item.$PropertyName -NotMatch $NotMatch)) { return $item }
            }
            #endregion Test Property
            #region Test Object
            else {
                if ($TestObject -and $item) { return $item }

                if ($TestEquals -and ($item -eq $Equals)) { return $item }
                if ($TestNotEquals -and ($item -ne $NotEquals)) { return $item }
                if ($TestLike -and ($item -like $Like)) { return $item }
                if ($TestNotLike -and ($item -notlike $NotLike)) { return $item }
                if ($TestIn -and ($item -In $In)) { return $item }
                if ($TestNotIn -and ($item -NotIn $NotIn)) { return $item }
                if ($TestMatch -and ($item -Match $Match)) { return $item }
                if ($TestNotMatch -and ($item -NotMatch $NotMatch)) { return $item }
            }
            #endregion Test Object
        }
    }
    end {

    }
}

(Get-Item Function:\Where-DbaObject).Visibility = "Private"

tools\dbatools\internal\functions\message\Remove-DbaMessageLevelModifier.ps1

function Remove-DbaMessageLevelModifier {
    <#
    .SYNOPSIS
        Removes a message level modifier.

    .DESCRIPTION
        Removes a message level modifier.

        Message Level Modifiers can be created by using New-DbaMessageLevelModifier.
        They are used to emphasize or deemphasize messages, in order to help with debugging.

    .PARAMETER Name
        Name of the message level modifier to remove.

    .PARAMETER Modifier
        The actual modifier to remove, as returned by Get-DbaMessageLevelModifier.

    .PARAMETER EnableException
        This parameters disables user-friendly warnings and enables the throwing of exceptions.
        This is less user friendly, but allows catching exceptions in calling scripts.

    .EXAMPLE
        PS C:\> Get-DbaMessageLevelModifier | Remove-DbaMessageLevelModifier

        Removes all message level modifiers, restoring everything to their default levels.

    .EXAMPLE
        PS C:\> Remove-DbaMessageLevelModifier -Name "mymodule.foo"

        Removes the message level modifier named "mymodule.foo"
    #>
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseShouldProcessForStateChangingFunctions", "")]
    [CmdletBinding()]
    param (
        [Parameter(ValueFromPipeline)]
        [string[]]
        $Name,

        [Parameter(ValueFromPipeline)]
        [Sqlcollaborative.Dbatools.Message.MessageLevelModifier[]]
        $Modifier,

        [switch]
        $EnableException
    )

    process {
        foreach ($item in $Name) {
            if ($item -eq "Sqlcollaborative.Dbatools.Message.MessageLevelModifier") { continue }

            if ([Sqlcollaborative.Dbatools.Message.MessageHost]::MessageLevelModifiers.ContainsKey($item.ToLower())) {
                [Sqlcollaborative.Dbatools.Message.MessageHost]::MessageLevelModifiers.Remove($item.ToLower())
            } else {
                Stop-Function -Message "No message level modifier of name $item found!" -EnableException $EnableException -Category InvalidArgument -Continue
            }
        }
        foreach ($item in $Modifier) {
            if ([Sqlcollaborative.Dbatools.Message.MessageHost]::MessageLevelModifiers.ContainsKey($item.Name)) {
                [Sqlcollaborative.Dbatools.Message.MessageHost]::MessageLevelModifiers.Remove($item.Name)
            } else {
                Stop-Function -Message "No message level modifier of name $($item.Name) found!" -EnableException $EnableException -Category InvalidArgument -Continue
            }
        }
    }
}

tools\dbatools\internal\functions\message\Write-HostColor.ps1

function Write-HostColor {
    <#
    .SYNOPSIS
        Function that recognizes html-style tags to insert color into printed text.

    .DESCRIPTION
        Function that recognizes html-style tags to insert color into printed text.

        Color tags should be designed to look like this:
        <c="<console color>">Text</c>
        For example this would be a valid string:
        "This message should <c="red">partially be painted in red</c>!"

        This allows specifying color within strings and avoids having to piece together colored text in multiple calls to Write-Host.
        Only colors that are part of the ConsoleColor enumeration can be used. Bad colors will be ignored in favor of the default color.

    .PARAMETER String
        The message to write to host.

    .PARAMETER DefaultColor
        Default: (Get-DbatoolsConfigValue -Name "message.infocolor")
        The color to write stuff to host in when no (or bad) color-code was specified.

    .EXAMPLE
        Write-HostColor -String 'This is going to be <c="red">bloody red</c> text! And this is <c="green">green stuff</c> for extra color'

        Will print the specified line in multiple colors

    .EXAMPLE
        $string1 = 'This is going to be <c="red">bloody red</c> text! And this is <c="green">green stuff</c> for extra color'
        $string2 = '<c="red">bloody red</c> text! And this is <c="green">green stuff</c> for extra color'
        $string3 = 'This is going to be <c="red">bloody red</c> text! And this is <c="green">green stuff</c>'
        $string1, $string2, $string3 | Write-HostColor -DefaultColor "Magenta"

        Will print all three lines, respecting the color-codes, but use the color "Magenta" as default color.

    .EXAMPLE
        $stringLong = @"
        Dear <c="red">Sirs</c><c="green"> and</c> <c="blue">Madams</c>,

        it has come to our attention that you are not sufficiently <c="darkblue">awesome!</c>
        Kindly improve your <c="yellow">AP</c> (<c="magenta">awesome-ness points</c>) by at least 50% to maintain you membership in Awesome Inc!

        You have <c="green">27 3/4</c> days time to meet this deadline. <c="darkyellow">After this we will unfortunately be forced to rend you assunder and sacrifice your remains to the devil</c>.

        Best regards,
        <c="red">Luzifer</c>
        "@
        Write-HostColor -String $stringLong

        Will print a long multiline text in its entirety while still respecting the colorcodes
    #>
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSAvoidUsingWriteHost", "")]
    [CmdletBinding()]
    param (
        [Parameter(ValueFromPipeline)]
        [string[]]
        $String,

        [ConsoleColor]
        $DefaultColor = (Get-DbatoolsConfigValue -Name "message.infocolor")
    )
    process {
        foreach ($line in $String) {
            foreach ($row in $line.Split("`n").Split([environment]::NewLine)) {
                if ($row -notlike '*<c=["'']*["'']>*</c>*') { Write-Host -Object $row -ForegroundColor $DefaultColor }
                else {
                    $match = ($row | Select-String '<c=["''](.*?)["'']>(.*?)</c>' -AllMatches).Matches
                    $index = 0
                    $count = 0

                    while ($count -le $match.Count) {
                        if ($count -lt $Match.Count) {
                            Write-Host -Object $row.SubString($index, ($match[$count].Index - $Index)) -ForegroundColor $DefaultColor -NoNewline
                            try { Write-Host -Object $match[$count].Groups[2].Value -ForegroundColor $match[$count].Groups[1].Value -NoNewline -ErrorAction Stop }
                            catch { Write-Host -Object $match[$count].Groups[2].Value -ForegroundColor $DefaultColor -NoNewline -ErrorAction Stop }

                            $index = $match[$count].Index + $match[$count].Length
                            $count++
                        } else {
                            Write-Host -Object $row.SubString($index) -ForegroundColor $DefaultColor
                            $count++
                        }
                    }
                }
            }
        }
    }
}

tools\dbatools\internal\maintenance\tempcleanup.ps1

$scriptBlock = {
    Get-ChildItem -Path $env:TEMP -Filter dbatools* | Remove-Item -ErrorAction Ignore -Recurse
}
Register-DbaMaintenanceTask -Name "tempcleanup" -ScriptBlock $scriptBlock -Once -Delay (New-TimeSpan -Minutes 1) -Priority Low

tools\dbatools\internal\functions\New-DbaLogShippingPrimaryDatabase.ps1

function New-DbaLogShippingPrimaryDatabase {
    <#
        .SYNOPSIS
            New-DbaLogShippingPrimaryDatabase add the primary database to log shipping

        .DESCRIPTION
            New-DbaLogShippingPrimaryDatabase will add the primary database to log shipping.
            This is executed on the primary server.

        .PARAMETER SqlInstance
            SQL Server instance. You must have sysadmin access and server version must be SQL Server version 2000 or greater.

        .PARAMETER SqlCredential
            Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

        .PARAMETER Database
            Database to set up log shipping for.

        .PARAMETER BackupDirectory
            Is the path to the backup folder on the primary server.

        .PARAMETER BackupJob
            Is the name of the SQL Server Agent job on the primary server that copies the backup into the backup folder.

        .PARAMETER BackupJobID
            The SQL Server Agent job ID associated with the backup job on the primary server.

        .PARAMETER BackupRetention
            Is the length of time, in minutes, to retain the log backup file in the backup directory on the primary server.

        .PARAMETER BackupShare
            Is the network path to the backup directory on the primary server.

        .PARAMETER BackupThreshold
            Is the length of time, in minutes, after the last backup before a threshold_alert error is raised.
            The default is 60.

        .PARAMETER CompressBackup
            Enables the use of backup compression

        .PARAMETER ThresholdAlert
            Is the length of time, in minutes, when the alert is to be raised when the backup threshold is exceeded.
            The default is 14,420.

        .PARAMETER HistoryRetention
            Is the length of time in minutes in which the history will be retained.
            The default is 14420.

        .PARAMETER MonitorServer
            Is the name of the monitor server.
            The default is the name of the primary server.

        .PARAMETER MonitorCredential
            Allows you to login to enter a secure credential.
            This is only needed in combination with MonitorServerSecurityMode having either a 0 or 'sqlserver' value.
            To use: $scred = Get-Credential, then pass $scred object to the -MonitorCredential parameter.

        .PARAMETER MonitorServerSecurityMode
            The security mode used to connect to the monitor server. Allowed values are 0, "sqlserver", 1, "windows"
            The default is 1 or Windows.

        .PARAMETER ThresholdAlertEnabled
            Specifies whether an alert will be raised when backup threshold is exceeded.
            The default is 0.

        .PARAMETER WhatIf
            Shows what would happen if the command were to run. No actions are actually performed.

        .PARAMETER Confirm
            Prompts you for confirmation before executing any changing operations within the command.

        .PARAMETER EnableException
            By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
            This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
            Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

        .PARAMETER Force
            The force parameter will ignore some errors in the parameters and assume defaults.
            It will also remove the any present schedules with the same name for the specific job.

        .NOTES
            Author: Sander Stad (@sqlstad, sqlstad.nl)
            Website: https://dbatools.io
            Copyright: (c) 2018 by dbatools, licensed under MIT
            License: MIT https://opensource.org/licenses/MIT

        .EXAMPLE
            New-DbaLogShippingPrimaryDatabase -SqlInstance sql1 -Database DB1 -BackupDirectory D:\data\logshipping -BackupJob LSBackup_DB1 -BackupRetention 4320 -BackupShare "\\sql1\logshipping" -BackupThreshold 60 -CompressBackup -HistoryRetention 14420 -MonitorServer sql1 -ThresholdAlertEnabled

       #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "Low")]

    param (
        [parameter(Mandatory)]
        [Alias("ServerInstance", "SqlServer")]
        [object]$SqlInstance,
        [System.Management.Automation.PSCredential]$SqlCredential,
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [object]$Database,
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [string]$BackupDirectory,
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [string]$BackupJob,
        [Parameter(Mandatory)]
        [int]$BackupRetention,
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [string]$BackupShare,
        [int]$BackupThreshold = 60,
        [switch]$CompressBackup,
        [int]$ThresholdAlert = 14420,
        [int]$HistoryRetention = 14420,
        [string]$MonitorServer,
        [ValidateSet(0, "sqlserver", 1, "windows")]
        [object]$MonitorServerSecurityMode = 1,
        [System.Management.Automation.PSCredential]$MonitorCredential,
        [switch]$ThresholdAlertEnabled,
        [Alias('Silent')]
        [switch]$EnableException,
        [switch]$Force
    )

    # Try connecting to the instance
    try {
        $server = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential
    } catch {
        Stop-Function -Message "Could not connect to Sql Server instance" -Target $SqlInstance -Continue
    }

    # Check if the backup UNC path is correct and reachable
    if ([bool]([uri]$BackupShare).IsUnc -and $BackupShare -notmatch '^\\(?:\\[^<>:`"/\\|?*]+)+$') {
        Stop-Function -Message "The backup share path $BackupShare should be formatted in the form \\server\share." -Target $SqlInstance
        return
    } else {
        if (-not ((Test-Path $BackupShare -PathType Container -IsValid) -and ((Get-Item $BackupShare).PSProvider.Name -eq 'FileSystem'))) {
            Stop-Function -Message "The backup share path $BackupShare is not valid or can't be reached." -Target $SqlInstance
            return
        }
    }

    # Check the backup compression
    if ($CompressBackup -eq $true) {
        Write-Message -Message "Setting backup compression to 1." -Level Verbose
        $BackupCompression = 1
    } elseif ($CompressBackup -eq $false) {
        Write-Message -Message "Setting backup compression to 0." -Level Verbose
        $BackupCompression = 0
    } elseif (-not $CompressBackup) {
        $defaultCompression = (Get-DbaSpConfigure -SqlInstance $SqlInstance -ConfigName DefaultBackupCompression).ConfiguredValue
        Write-Message -Message "Setting backup compression to default value $defaultCompression." -Level Verbose
        $BackupCompression = $defaultCompression

    }

    # Check of the MonitorServerSecurityMode value is of type string and set the integer value
    if ($MonitorServerSecurityMode -notin 0, 1) {
        $MonitorServerSecurityMode = switch ($MonitorServerSecurityMode) {"WINDOWS" { 1 } "SQLSERVER" { 0 } }
        Write-Message -Message "Setting monitor server security mode to $MonitorServerSecurityMode." -Level Verbose
    }

    # Check the MonitorServer
    if (-not $MonitorServer -and $Force) {
        Write-Message -Message "Setting monitor server to $SqlInstance." -Level Verbose
        $MonitorServer = $SqlInstance
    }

    # Check the MonitorServerSecurityMode if it's SQL Server authentication
    if ($MonitorServerSecurityMode -eq 0 -and -not $MonitorCredential) {
        Stop-Function -Message "The MonitorServerCredential cannot be empty when using SQL Server authentication." -Target $SqlInstance
        return
    } elseif ($MonitorServerSecurityMode -eq 0 -and $MonitorCredential) {
        # Get the username and password from the credential
        $MonitorLogin = $MonitorCredential.UserName
        $MonitorPassword = $MonitorCredential.GetNetworkCredential().Password

        # Check if the user is in the database
        if ($server.Databases['master'].Users.Name -notcontains $MonitorLogin) {
            Stop-Function -Message "User $MonitorLogin for monitor login must be in the master database." -Target $SqlInstance
            return
        }
    }

    # Check if the database is present on the source sql server
    if ($server.Databases.Name -notcontains $Database) {
        Stop-Function -Message "Database $Database is not available on instance $SqlInstance" -Target $SqlInstance
        return
    }

    # Check the if Threshold alert needs to be enabled
    if ($ThresholdAlertEnabled) {
        [int]$ThresholdAlertEnabled = 1
        Write-Message -Message "Setting Threshold alert to $ThresholdAlertEnabled." -Level Verbose
    } else {
        [int]$ThresholdAlertEnabled = 0
        Write-Message -Message "Setting Threshold alert to $ThresholdAlertEnabled." -Level Verbose
    }

    # Set the log shipping primary
    $Query = "
        DECLARE @LS_BackupJobId AS uniqueidentifier;
        DECLARE @LS_PrimaryId AS uniqueidentifier;
        EXEC master.sys.sp_add_log_shipping_primary_database
            @database = N'$Database'
            ,@backup_directory = N'$BackupDirectory'
            ,@backup_share = N'$BackupShare'
            ,@backup_job_name = N'$BackupJob'
            ,@backup_retention_period = $BackupRetention"

    if ($SqlInstance.Version.Major -gt 9) {
        $Query += ",@backup_compression = $BackupCompression"
    }

    if ($MonitorServer) {
        $Query += ",@monitor_server = N'$MonitorServer'
            ,@monitor_server_security_mode = $MonitorServerSecurityMode
            ,@threshold_alert = $ThresholdAlert
            ,@threshold_alert_enabled = $ThresholdAlertEnabled"
    }

    $Query += ",@backup_threshold = $BackupThreshold
            ,@history_retention_period = $HistoryRetention
            ,@backup_job_id = @LS_BackupJobId OUTPUT
            ,@primary_id = @LS_PrimaryId OUTPUT "

    # Check the MonitorServerSecurityMode if it's SQL Server authentication
    if ($MonitorServer -and $MonitorServerSecurityMode -eq 0 ) {
        $Query += ",@monitor_server_login = N'$MonitorLogin'
            ,@monitor_server_password = N'$MonitorPassword' "
    }

    if ($server.Version.Major -gt 9) {
        $Query += ",@overwrite = 1;"
    } else {
        $Query += ";"
    }

    # Execute the query to add the log shipping primary
    if ($PSCmdlet.ShouldProcess($SqlServer, ("Configuring logshipping for primary database $Database on $SqlInstance"))) {
        try {
            Write-Message -Message "Configuring logshipping for primary database $Database." -Level Verbose
            Write-Message -Message "Executing query:`n$Query" -Level Verbose
            $server.Query($Query)
        } catch {
            Write-Message -Message "$($_.Exception.InnerException.InnerException.InnerException.InnerException.Message)" -Level Warning
            Stop-Function -Message "Error executing the query.`n$($_.Exception.Message)`n$($Query)" -ErrorRecord $_ -Target $SqlInstance -Continue
        }
    }

    Write-Message -Message "Finished adding the primary database $Database to log shipping." -Level Verbose

}

tools\dbatools\internal\scripts\cmdlets.ps1

<#
Registers the cmdlets published by this module.
Necessary for full hybrid module support.
#>
$commonParam = @{
    HelpFile = "$($PSModuleRoot)\en-us\dbatools.dll-Help.xml"
    Module   = $ExecutionContext.SessionState.Module
}

Import-DbaCmdlet @commonParam -Name Write-Message -Type ([Sqlcollaborative.Dbatools.Commands.WriteMessageCommand])
Import-DbaCmdlet @commonParam -Name Select-DbaObject -Type ([Sqlcollaborative.Dbatools.Commands.SelectDbaObjectCommand])
Import-DbaCmdlet @commonParam -Name Set-DbatoolsConfig -Type ([Sqlcollaborative.Dbatools.Commands.SetDbatoolsConfigCommand])

tools\dbatools\internal\scripts\dbatools-maintenance.ps1

foreach ($item in (Get-ChildItem "$script:PSModuleRoot\internal\maintenance" -Filter *.ps1)) {
    if ($script:doDotSource) { . $item.FullName }
    else { $ExecutionContext.InvokeCommand.InvokeScript($false, ([scriptblock]::Create([io.file]::ReadAllText($item.FullName))), $null, $null) }
}

$scriptBlock = {
    $script:___ScriptName = 'dbatools-maintenance'

    # Import module in a way where internals are available
    $dbatools_disableTimeMeasurements = $true
    Import-Module "$([Sqlcollaborative.Dbatools.dbaSystem.SystemHost]::ModuleBase)\dbatools.psm1"

    try {
        #region Main Execution
        while ($true) {
            # This portion is critical to gracefully closing the script
            if ([Sqlcollaborative.Dbatools.Runspace.RunspaceHost]::Runspaces[$___ScriptName.ToLower()].State -notlike "Running") {
                break
            }

            $task = $null
            $tasksDone = @()
            while ($task = [Sqlcollaborative.Dbatools.Maintenance.MaintenanceHost]::GetNextTask($tasksDone)) {
                try { ([ScriptBlock]::Create($task.ScriptBlock.ToString())).Invoke() }
                catch { Write-Message -EnableException $false -Level Verbose -Message "[Maintenance] Task '$($task.Name)' failed to execute: $_" -ErrorRecord $_ -FunctionName "task:Maintenance" -Target $task }
                $task.LastExecution = Get-Date
                $tasksDone += $task.Name
            }

            Start-Sleep -Seconds 5
        }
        #endregion Main Execution
    } catch {  }
    finally {
        [Sqlcollaborative.Dbatools.Runspace.RunspaceHost]::Runspaces[$___ScriptName.ToLower()].SignalStopped()
    }
}

Register-DbaRunspace -ScriptBlock $scriptBlock -Name "dbatools-maintenance"
Start-DbaRunspace -Name "dbatools-maintenance"

tools\dbatools\internal\scripts\insertTepp.ps1

if (Get-Command TabExpansionPlusPlus\Register-ArgumentCompleter -ErrorAction Ignore) {
    $script:TEPP = $true
} else {
    $script:TEPP = $false
}

$functions = Get-ChildItem function:\*-Dba*
[Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::DbatoolsCommands = $functions
$names = $functions.Name

#region Automatic TEPP by parameter name
Register-DbaTeppArgumentCompleter -Command $names -Parameter Alert -Name Alert -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter AlertCategory -Name AlertCategory -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter Audit -Name Audit -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter AuditSpecification -Name AuditSpecification -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter AvailabilityGroup -Name AvailabilityGroup -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter BackupDevice -Name BackupDevice -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter ConfigName -Name ConfigName -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter Credential -Name Credential -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter CredentialIdentity -Name Credential -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter CustomError -Name CustomError -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter Database -Name Database -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter Endpoint -Name Endpoint -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter ExcludeAlert -Name Alert -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter ExcludeAlertCategory -Name AlertCategory -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter ExcludeAudit -Name Audit -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter ExcludeAuditSpecification -Name AuditSpecification -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter ExcludeAvailabilityGroup -Name AvailabilityGroup -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter ExcludeBackupDevice -Name BackupDevice -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter ExcludeConfigName -Name ConfigName -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter ExcludeCredential -Name Credential -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter ExcludeCredentialIdentity -Name Credential -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter ExcludeCustomError -Name CustomError -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter ExcludeDatabase -Name Database -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter ExcludeEndpoint -Name Endpoint -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter ExcludeGroup -Name Group -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter ExcludeJob -Name Job -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter ExcludeJobCategory -Name JobCategory -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter ExcludeLinkedServer -Name LinkedServer -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter ExcludeLogin -Name Login -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter ExcludeMailAccount -Name MailAccount -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter ExcludeMailProfile -Name MailProfile -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter ExcludeMailServer -Name MailServer -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter ExcludeOperator -Name Operator -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter ExcludeProxyAccount -Name ProxyAccount -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter ExcludeResourcePool -Name ResourcePool -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter ExcludeSchedule -Name Schedule -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter ExcludeServerTrigger -Name ServerTrigger -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter ExcludeSession -Name Session -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter ExcludeSnapshot -Name Snapshot -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter Group -Name Group -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter Job -Name Job -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter JobCategory -Name JobCategory -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter LinkedServer -Name LinkedServer -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter Login -Name Login -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter MailAccount -Name MailAccount -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter MailProfile -Name MailProfile -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter MailServer -Name MailServer -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter Operator -Name Operator -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter ProxyAccount -Name ProxyAccount -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter ResourcePool -Name ResourcePool -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter Schedule -Name Schedule -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter ServerTrigger -Name ServerTrigger -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter Session -Name Session -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter Snapshot -Name Snapshot -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter SqlInstance -Name SqlInstance -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter InstanceProperty -Name InstanceProperty -All
Register-DbaTeppArgumentCompleter -Command $names -Parameter PowerPlan -Name PowerPlan -All
#endregion Automatic TEPP by parameter name

#region Explicit TEPP
Register-DbaTeppArgumentCompleter -Command "Import-DbaCsv" -Parameter Delimiter -Name delimiter
Register-DbaTeppArgumentCompleter -Command "Find-DbaCommand" -Parameter Tag -Name tag
Register-DbaTeppArgumentCompleter -Command "Get-DbatoolsConfig", "Get-DbatoolsConfigValue", "Register-DbatoolsConfig", "Set-DbatoolsConfig" -Parameter FullName -Name config
Register-DbaTeppArgumentCompleter -Command "Get-DbatoolsConfig", "Register-DbatoolsConfig", "Set-DbatoolsConfig" -Parameter Module -Name configmodule
Register-DbaTeppArgumentCompleter -Command "Get-DbatoolsConfig", "Register-DbatoolsConfig", "Set-DbatoolsConfig" -Parameter Name -Name config_name
Register-DbaTeppArgumentCompleter -Command "Get-DbaProcess", "Stop-DbaProcess" -Parameter ExcludeSpid -Name processSpid
Register-DbaTeppArgumentCompleter -Command "Get-DbaProcess", "Stop-DbaProcess" -Parameter Hostname -Name processHostname
Register-DbaTeppArgumentCompleter -Command "Get-DbaProcess", "Stop-DbaProcess" -Parameter Program -Name processProgram
Register-DbaTeppArgumentCompleter -Command "Get-DbaProcess", "Stop-DbaProcess" -Parameter Spid -Name processSpid
Register-DbaTeppArgumentCompleter -Command "Import-DbaXESessionTemplate", "Get-DbaXESessionTemplate", "Export-DbaXESessionTemplate" -Parameter Template -Name xesessiontemplate
Register-DbaTeppArgumentCompleter -Command "Import-DbaPfDataCollectorSetTemplate", "Get-DbaPfDataCollectorSetTemplate", "Export-DbaPfDataCollectorSetTemplate"  -Parameter Template -Name perfmontemplate
#endregion Explicit TEPP

tools\dbatools\internal\scripts\logfilescript.ps1

$scriptBlock = {
    $script:___ScriptName = 'dbatools-logging'

    #region Helper Functions
    function Clean-ErrorXml {
        [CmdletBinding()]
        param (
            $Path
        )

        $totalLength = $Null
        $files = Get-ChildItem -Path $Path.FullName -Filter "dbatools_$($pid)_error_*.xml" | Sort-Object LastWriteTime
        $totalLength = $files | Measure-Object Length -Sum | Select-Object -ExpandProperty Sum
        if (([Sqlcollaborative.Dbatools.Message.LogHost]::MaxErrorFileBytes) -gt $totalLength) { return }

        $removed = 0
        foreach ($file in $files) {
            $removed += $file.Length
            Remove-Item -Path $file.FullName -Force -Confirm:$false

            if (($totalLength - $removed) -lt ([Sqlcollaborative.Dbatools.Message.LogHost]::MaxErrorFileBytes)) { break }
        }
    }

    function Clean-MessageLog {
        [CmdletBinding()]
        param (
            $Path
        )

        if ([Sqlcollaborative.Dbatools.Message.LogHost]::MaxMessagefileCount -eq 0) { return }

        $files = Get-ChildItem -Path $Path.FullName -Filter "dbatools_$($pid)_message_*.log" | Sort-Object LastWriteTime
        if (([Sqlcollaborative.Dbatools.Message.LogHost]::MaxMessagefileCount) -ge $files.Count) { return }

        $removed = 0
        foreach ($file in $files) {
            $removed++
            Remove-Item -Path $file.FullName -Force -Confirm:$false

            if (($files.Count - $removed) -le ([Sqlcollaborative.Dbatools.Message.LogHost]::MaxMessagefileCount)) { break }
        }
    }

    function Clean-GlobalLog {
        [CmdletBinding()]
        param (
            $Path
        )

        # Kill too old files
        Get-ChildItem -Path "$($Path.FullName)\*" -Include "*.xml", "*.log" -Filter "*" | Where-Object LastWriteTime -LT ((Get-Date) - ([Sqlcollaborative.Dbatools.Message.LogHost]::MaxLogFileAge)) |Remove-Item -Force -Confirm:$false

        # Handle the global overcrowding
        $files = Get-ChildItem -Path "$($Path.FullName)\*" -Include "*.xml", "*.log" -Filter "*" | Sort-Object LastWriteTime
        if (-not ($files)) { return }
        $totalLength = $files | Measure-Object Length -Sum | Select-Object -ExpandProperty Sum

        if (([Sqlcollaborative.Dbatools.Message.LogHost]::MaxTotalFolderSize) -gt $totalLength) { return }

        $removed = 0
        foreach ($file in $files) {
            $removed += $file.Length
            Remove-Item -Path $file.FullName -Force -Confirm:$false

            if (($totalLength - $removed) -lt ([Sqlcollaborative.Dbatools.Message.LogHost]::MaxTotalFolderSize)) { break }
        }
    }
    #endregion Helper Functions

    try {
        while ($true) {
            # This portion is critical to gracefully closing the script
            if ([Sqlcollaborative.Dbatools.Runspace.RunspaceHost]::Runspaces[$___ScriptName.ToLower()].State -notlike "Running") {
                break
            }

            $path = [Sqlcollaborative.Dbatools.Message.LogHost]::LoggingPath
            if (-not (Test-Path $path)) {
                $root = New-Item $path -ItemType Directory -Force -ErrorAction Stop
            } else { $root = Get-Item -Path $path }

            try { [int]$num_Error = (Get-ChildItem -Path $root.FullName -Filter "dbatools_$($pid)_error_*.xml" | Sort-Object LastWriteTime -Descending | Select-Object -First 1 -ExpandProperty Name | Select-String -Pattern "(\d+)" -AllMatches).Matches[1].Value }
            catch { }
            try { [int]$num_Message = (Get-ChildItem -Path $root.FullName -Filter "dbatools_$($pid)_message_*.log" | Sort-Object LastWriteTime -Descending | Select-Object -First 1 -ExpandProperty Name | Select-String -Pattern "(\d+)" -AllMatches).Matches[1].Value }
            catch { }
            if (-not ($num_Error)) { $num_Error = 0 }
            if (-not ($num_Message)) { $num_Message = 0 }

            #region Process Errors
            while ([Sqlcollaborative.Dbatools.Message.LogHost]::OutQueueError.Count -gt 0) {
                $num_Error++

                $Record = $null
                [Sqlcollaborative.Dbatools.Message.LogHost]::OutQueueError.TryDequeue([ref]$Record)

                if ($Record) {
                    $Record | Export-Clixml -Path "$($root.FullName)\dbatools_$($pid)_error_$($num_Error).xml" -Depth 3
                }

                Clean-ErrorXml -Path $root
            }
            #endregion Process Errors

            #region Process Logs
            while ([Sqlcollaborative.Dbatools.Message.LogHost]::OutQueueLog.Count -gt 0) {
                $CurrentFile = "$($root.FullName)\dbatools_$($pid)_message_$($num_Message).log"
                if (Test-Path $CurrentFile) {
                    $item = Get-Item $CurrentFile
                    if ($item.Length -gt ([Sqlcollaborative.Dbatools.Message.LogHost]::MaxMessagefileBytes)) {
                        $num_Message++
                        $CurrentFile = "$($root.FullName)\dbatools_$($pid)_message_$($num_Message).log"
                    }
                }

                $Entry = $null
                [Sqlcollaborative.Dbatools.Message.LogHost]::OutQueueLog.TryDequeue([ref]$Entry)
                if ($Entry) {
                    Add-Content -Path $CurrentFile -Value (ConvertTo-Csv -InputObject $Entry -NoTypeInformation)[1]
                }
            }
            #endregion Process Logs

            Clean-MessageLog -Path $root
            Clean-GlobalLog -Path $root

            Start-Sleep -Seconds 5
        }
    } catch { }
    finally {
        [Sqlcollaborative.Dbatools.Runspace.RunspaceHost]::Runspaces[$___ScriptName.ToLower()].SignalStopped()
    }
}

Register-DbaRunspace -ScriptBlock $scriptBlock -Name "dbatools-logging"
Start-DbaRunspace -Name "dbatools-logging"

tools\dbatools\internal\functions\New-DbaLogShippingPrimarySecondary.ps1

function New-DbaLogShippingPrimarySecondary {
    <#
        .SYNOPSIS
            New-DbaLogShippingPrimarySecondary adds an entry for a secondary database.

        .DESCRIPTION
            New-DbaLogShippingPrimarySecondary adds an entry for a secondary database.
            This is executed on the primary server.

        .PARAMETER SqlInstance
            SQL Server instance. You must have sysadmin access and server version must be SQL Server version 2000 or greater.

        .PARAMETER SqlCredential
            Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

        .PARAMETER PrimaryDatabase
            Is the name of the database on the primary server.

        .PARAMETER SecondaryDatabase
            Is the name of the secondary database.

        .PARAMETER SecondaryServer
            Is the name of the secondary server.

        .PARAMETER SecondarySqlCredential
            Allows you to login to servers using SQL Logins as opposed to Windows Auth/Integrated/Trusted. To use:
            $scred = Get-Credential, then pass $scred object to the -SecondarySqlCredential parameter.

        .PARAMETER WhatIf
            Shows what would happen if the command were to run. No actions are actually performed.

        .PARAMETER Confirm
            Prompts you for confirmation before executing any changing operations within the command.

        .PARAMETER EnableException
            By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
            This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
            Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

        .NOTES
            Author: Sander Stad (@sqlstad, sqlstad.nl)
            Website: https://dbatools.io
            Copyright: (c) 2018 by dbatools, licensed under MIT
            License: MIT https://opensource.org/licenses/MIT

        .LINK
            https://dbatools.io/New-DbaLogShippingPrimarySecondary

        .EXAMPLE
            New-DbaLogShippingPrimarySecondary -SqlInstance sql1 -PrimaryDatabase DB1 -SecondaryServer sql2 -SecondaryDatabase DB1_DR
       #>
    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "Low")]
    param (
        [parameter(Mandatory)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter]$SqlInstance,
        [PSCredential]$SqlCredential,
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [object]$PrimaryDatabase,
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [object]$SecondaryDatabase,
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [DBAInstanceParameter]$SecondaryServer,
        [PSCredential]$SecondarySqlCredential,
        [Alias('Silent')]
        [switch]$EnableException
    )

    # Try connecting to the instance
    try {
        $ServerPrimary = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential
    } catch {
        Stop-Function -Message "Could not connect to Sql Server instance" -Target $SqlInstance -Continue
    }

    # Try connecting to the instance
    try {
        $ServerSecondary = Connect-SqlInstance -SqlInstance $SecondaryServer -SqlCredential $SecondarySqlCredential
    } catch {
        Stop-Function -Message "Could not connect to Sql Server instance" -Target $SecondaryServer -Continue
    }

    # Check if the database is present on the source sql server
    if ($ServerPrimary.Databases.Name -notcontains $PrimaryDatabase) {
        Stop-Function -Message "Database $PrimaryDatabase is not available on instance $SqlInstance" -ErrorRecord $_ -Target $SqlInstance -Continue
    }

    # Check if the database is present on the destination sql server
    if ($ServerSecondary.Databases.Name -notcontains $SecondaryDatabase) {
        Stop-Function -Message "Database $SecondaryDatabase is not available on instance $SecondaryServer" -ErrorRecord $_ -Target $SecondaryServer -Continue
    }

    $Query = "SELECT primary_database FROM msdb.dbo.log_shipping_primary_databases WHERE primary_database = '$PrimaryDatabase'"

    try {
        Write-Message -Message "Executing query:`n$Query" -Level Verbose
        $Result = $ServerPrimary.Query($Query)
        if ($Result.Count -eq 0 -or $Result[0] -ne $PrimaryDatabase) {
            Stop-Function -Message "Database $PrimaryDatabase does not exist as log shipping primary.`nPlease run New-DbaLogShippingPrimaryDatabase first."  -ErrorRecord $_ -Target $SqlInstance -Continue
        }
    } catch {
        Stop-Function -Message "Error executing the query.`n$($_.Exception.Message)`n$Query" -ErrorRecord $_ -Target $SqlInstance -Continue
    }

    # Set the query for the log shipping primary and secondary
    $Query = "EXEC master.sys.sp_add_log_shipping_primary_secondary
        @primary_database = N'$PrimaryDatabase'
        ,@secondary_server = N'$SecondaryServer'
        ,@secondary_database = N'$SecondaryDatabase' "

    if ($ServerPrimary.Version.Major -gt 9) {
        $Query += ",@overwrite = 1;"
    } else {
        $Query += ";"
    }

    # Execute the query to add the log shipping primary
    if ($PSCmdlet.ShouldProcess($SqlInstance, ("Configuring logshipping connecting the primary database $PrimaryDatabase to secondary database $SecondaryDatabase on $SqlInstance"))) {
        try {
            Write-Message -Message "Configuring logshipping connecting the primary database $PrimaryDatabase to secondary database $SecondaryDatabase on $SqlInstance." -Level Verbose
            Write-Message -Message "Executing query:`n$Query" -Level Verbose
            $ServerPrimary.Query($Query)
        } catch {
            Write-Message -Message "$($_.Exception.InnerException.InnerException.InnerException.InnerException.Message)" -Level Warning
            Stop-Function -Message "Error executing the query.`n$($_.Exception.Message)`n$Query" -ErrorRecord $_ -Target $SqlInstance -Continue
        }
    }

    Write-Message -Message "Finished configuring of primary database $PrimaryDatabase to secondary database $SecondaryDatabase." -Level Verbose

}

tools\dbatools\internal\functions\New-DbaLogShippingSecondaryDatabase.ps1

function New-DbaLogShippingSecondaryDatabase {
    <#
        .SYNOPSIS
            New-DbaLogShippingSecondaryDatabase sets up a secondary databases for log shipping.

        .DESCRIPTION
            New-DbaLogShippingSecondaryDatabase sets up a secondary databases for log shipping.
            This is executed on the secondary server.

        .PARAMETER SqlInstance
            SQL Server instance. You must have sysadmin access and server version must be SQL Server version 2000 or greater.

        .PARAMETER SqlCredential
            Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)

        .PARAMETER BufferCount
            The total number of buffers used by the backup or restore operation.
            The default is -1.

        .PARAMETER BlockSize
            The size, in bytes, that is used as the block size for the backup device.
            The default is -1.

        .PARAMETER DisconnectUsers
            If set to 1, users are disconnected from the secondary database when a restore operation is performed.
            Te default is 0.

        .PARAMETER HistoryRetention
            Is the length of time in minutes in which the history is retained.
            The default is 14420.

        .PARAMETER MaxTransferSize
            The size, in bytes, of the maximum input or output request which is issued by SQL Server to the backup device.

        .PARAMETER PrimaryServer
            The name of the primary instance of the Microsoft SQL Server Database Engine in the log shipping configuration.

        .PARAMETER PrimaryDatabase
            Is the name of the database on the primary server.

        .PARAMETER RestoreAll
            If set to 1, the secondary server restores all available transaction log backups when the restore job runs.
            The default is 1.

        .PARAMETER RestoreDelay
            The amount of time, in minutes, that the secondary server waits before restoring a given backup file.
            The default is 0.

        .PARAMETER RestoreMode
            The restore mode for the secondary database. The default is 0.
            0 = Restore log with NORECOVERY.
            1 = Restore log with STANDBY.

        .PARAMETER RestoreThreshold
            The number of minutes allowed to elapse between restore operations before an alert is generated.

        .PARAMETER SecondaryDatabase
            Is the name of the secondary database.

        .PARAMETER ThresholdAlert
            Is the alert to be raised when the backup threshold is exceeded.
            The default is 14420.

        .PARAMETER ThresholdAlertEnabled
            Specifies whether an alert is raised when backup_threshold is exceeded.

        .PARAMETER WhatIf
            Shows what would happen if the command were to run. No actions are actually performed.

        .PARAMETER Confirm
            Prompts you for confirmation before executing any changing operations within the command.

        .PARAMETER EnableException
            By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
            This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
            Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

        .PARAMETER Force
            The force parameter will ignore some errors in the parameters and assume defaults.
            It will also remove the any present schedules with the same name for the specific job.

        .NOTES
            Author: Sander Stad (@sqlstad, sqlstad.nl)
            Website: https://dbatools.io
            Copyright: (c) 2018 by dbatools, licensed under MIT
            License: MIT https://opensource.org/licenses/MIT

        .EXAMPLE
            New-DbaLogShippingSecondaryDatabase -SqlInstance sql2 -SecondaryDatabase DB1_DR -PrimaryServer sql1 -PrimaryDatabase DB1 -RestoreDelay 0 -RestoreMode standby -DisconnectUsers -RestoreThreshold 45 -ThresholdAlertEnabled -HistoryRetention 14420
       #>

    [CmdletBinding(SupportsShouldProcess, ConfirmImpact = "Low")]

    param (
        [parameter(Mandatory)]
        [Alias("ServerInstance", "SqlServer")]
        [DbaInstanceParameter]$SqlInstance,
        [PSCredential]$SqlCredential,
        [int]$BufferCount = -1,
        [int]$BlockSize = -1,
        [switch]$DisconnectUsers,
        [int]$HistoryRetention = 14420,
        [int]$MaxTransferSize,
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [DbaInstanceParameter]$PrimaryServer,
        [PSCredential]$PrimarySqlCredential,
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [object]$PrimaryDatabase,
        [int]$RestoreAll = 1,
        [int]$RestoreDelay = 0,
        [ValidateSet(0, 'NoRecovery', 1, 'Standby')]
        [object]$RestoreMode = 0,
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [int]$RestoreThreshold,
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [object]$SecondaryDatabase,
        [int]$ThresholdAlert = 14420,
        [switch]$ThresholdAlertEnabled,
        [Alias('Silent')]
        [switch]$EnableException,
        [switch]$Force
    )

    # Try connecting to the instance
    try {
        $ServerSecondary = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential
    } catch {
        Stop-Function -Message "Failure" -Category ConnectionError -Target $SqlInstance -ErrorRecord $_ -Continue
    }

    # Try connecting to the instance
    try {
        $ServerPrimary = Connect-SqlInstance -SqlInstance $PrimaryServer -SqlCredential $PrimarySqlCredential
    } catch {
        Stop-Function -Message "Failure" -Category ConnectionError -Target $PrimaryServer -ErrorRecord $_ -Continue
    }

    # Check if the database is present on the primary sql server
    if ($ServerPrimary.Databases.Name -notcontains $PrimaryDatabase) {
        Stop-Function -Message "Database $PrimaryDatabase is not available on instance $PrimaryServer" -Target $PrimaryServer -Continue
    }

    # Check if the database is present on the primary sql server
    if ($ServerSecondary.Databases.Name -notcontains $SecondaryDatabase) {
        Stop-Function -Message "Database $SecondaryDatabase is not available on instance $ServerSecondary" -Target $SqlInstance -Continue
    }

    # Check the restore mode
    if ($RestoreMode -notin 0, 1) {
        $RestoreMode = switch ($RestoreMode) { "NoRecovery" { 0}  "Standby" { 1 } }
        Write-Message -Message "Setting restore mode to $RestoreMode." -Level Verbose
    }

    # Check the if Threshold alert needs to be enabled
    if ($ThresholdAlertEnabled) {
        [int]$ThresholdAlertEnabled = 1
        Write-Message -Message "Setting Threshold alert to $ThresholdAlertEnabled." -Level Verbose
    } else {
        [int]$ThresholdAlertEnabled = 0
        Write-Message -Message "Setting Threshold alert to $ThresholdAlertEnabled." -Level Verbose
    }

    # Checking the option to disconnect users
    if ($DisconnectUsers) {
        [int]$DisconnectUsers = 1
        Write-Message -Message "Setting disconnect users to $DisconnectUsers." -Level Verbose
    } else {
        [int]$DisconnectUsers = 0
        Write-Message -Message "Setting disconnect users to $DisconnectUsers." -Level Verbose
    }

    # Check hte combination of the restore mode with the option to disconnect users
    if ($RestoreMode -eq 0 -and $DisconnectUsers -ne 0) {
        if ($Force) {
            [int]$DisconnectUsers = 0
            Write-Message -Message "Illegal combination of database restore mode $RestoreMode and disconnect users $DisconnectUsers. Setting it to $DisconnectUsers." -Level Warning
        } else {
            Stop-Function -Message "Illegal combination of database restore mode $RestoreMode and disconnect users $DisconnectUsers." -Target $SqlInstance -Continue
        }
    }

    # Set up the query
    $Query = "EXEC master.sys.sp_add_log_shipping_secondary_database
        @secondary_database = '$SecondaryDatabase'
        ,@primary_server = '$PrimaryServer'
        ,@primary_database = '$PrimaryDatabase'
        ,@restore_delay = $RestoreDelay
        ,@restore_all = $RestoreAll
        ,@restore_mode = $RestoreMode
        ,@disconnect_users = $DisconnectUsers
        ,@restore_threshold = $RestoreThreshold
        ,@threshold_alert = $ThresholdAlert
        ,@threshold_alert_enabled = $ThresholdAlertEnabled
        ,@history_retention_period = $HistoryRetention "

    # Addinf extra options to the query when needed
    if ($BlockSize -ne -1) {
        $Query += ",@block_size = $BlockSize"
    }

    if ($BufferCount -ne -1) {
        $Query += ",@buffer_count = $BufferCount"
    }

    if ($MaxTransferSize -ge 1) {
        $Query += ",@max_transfer_size = $MaxTransferSize"
    }

    if ($ServerSecondary.Version.Major -gt 9) {
        $Query += ",@overwrite = 1;"
    } else {
        $Query += ";"
    }

    # Execute the query to add the log shipping primary
    if ($PSCmdlet.ShouldProcess($SqlServer, ("Configuring logshipping for secondary database $SecondaryDatabase on $SqlInstance"))) {
        try {
            Write-Message -Message "Configuring logshipping for secondary database $SecondaryDatabase on $SqlInstance." -Level Verbose
            Write-Message -Message "Executing query:`n$Query" -Level Verbose
            $ServerSecondary.Query($Query)
        } catch {
            Write-Message -Message "$($_.Exception.InnerException.InnerException.InnerException.InnerException.Message)" -Level Warning
            Stop-Function -Message "Error executing the query.`n$($_.Exception.Message)`n$Query"  -ErrorRecord $_ -Target $SqlInstance -Continue
        }
    }

    Write-Message -Message "Finished adding the secondary database $SecondaryDatabase to log shipping." -Level Verbose

}

tools\dbatools\internal\functions\runspaces\Register-DbaRunspace.ps1

function Register-DbaRunspace {
    <#
    .SYNOPSIS
        Registers a scriptblock to run in the background.

    .DESCRIPTION
        This function registers a scriptblock to run in separate runspace.
        This is different from most runspace solutions, in that it is designed for permanent background tasks that need to be done.
        It guarantees a single copy of the task to run within the powershell process, even when running the same module in many runspaces in parallel.

        Updating:
        If this function is called multiple times, targeting the same name, it will update the scriptblock.
        - If that scriptblock is the same as the previous scriptblock, nothing changes
        - If that scriptblock is different from the previous ones, it will be registered, but will not be executed right away!
          Only after stopping and starting the runspace will it operate under the new scriptblock.

    .PARAMETER ScriptBlock
        The scriptblock to run in a dedicated runspace

    .PARAMETER Name
        The name to register the scriptblock under.

    .PARAMETER EnableException
        By default, when something goes wrong we try to catch it, interpret it and give you a friendly warning message.
        This avoids overwhelming you with "sea of red" exceptions, but is inconvenient because it basically disables advanced scripting.
        Using this switch turns this "nice by default" feature off and enables you to catch exceptions with your own try/catch.

    .EXAMPLE
        PS C:\> Register-DbaRunspace -ScriptBlock $scriptBlock -Name 'mymodule.maintenance'

        Registers the script defined in $scriptBlock under the name 'mymodule.maintenance'
        It does not start the runspace yet. If it already exists, it will overwrite the scriptblock without affecting the running script.

    .EXAMPLE
        PS C:\> Register-DbaRunspace -ScriptBlock $scriptBlock -Name 'mymodule.maintenance'
        PS C:\> Start-DbaRunspace -Name 'mymodule.maintenance'

        Registers the script defined in $scriptBlock under the name 'mymodule.maintenance'
        Then it starts the runspace, running the registered $scriptBlock
    #>
    [CmdletBinding(PositionalBinding = $false)]
    param
    (
        [Parameter(Mandatory)]
        [Scriptblock]
        $ScriptBlock,

        [Parameter(Mandatory)]
        [String]
        $Name,

        [switch]
        [Alias('Silent')]
        $EnableException
    )

    if ([Sqlcollaborative.Dbatools.Runspace.RunspaceHost]::Runspaces.ContainsKey($Name.ToLower())) {
        Write-Message -Level Verbose -Message "Updating runspace: $($Name.ToLower())" -Target $Name.ToLower()
        [Sqlcollaborative.Dbatools.Runspace.RunspaceHost]::Runspaces[$Name.ToLower()].SetScript($ScriptBlock)
    } else {
        Write-Message -Level Verbose -Message "Registering runspace: $($Name.ToLower())" -Target $Name.ToLower()
        [Sqlcollaborative.Dbatools.Runspace.RunspaceHost]::Runspaces[$Name.ToLower()] = New-Object Sqlcollaborative.Dbatools.Runspace.RunspaceContainer($Name.ToLower(), $ScriptBlock)
    }
}

tools\dbatools\internal\functions\tabcompletion\New-DbaTeppCompletionResult.ps1

function global:New-DbaTeppCompletionResult {
    <#
        .SYNOPSIS
            Generates a completion result for dbatools internal tab completion.

        .DESCRIPTION
            Generates a completion result for dbatools internal tab completion.

        .PARAMETER CompletionText
            The text to propose.

        .PARAMETER ToolTip
            The tooltip to show in tooltip-aware hosts (ISE, mostly)

        .PARAMETER ListItemText
            ???

        .PARAMETER CompletionResultType
            The type of object that is being completed.
            By default it generates one of type paramter value.

        .PARAMETER NoQuotes
            Whether to put the result in quotes or not.

        .EXAMPLE
            New-DbaTeppCompletionResult -CompletionText 'master' -ToolTip 'master'

            Returns a CompletionResult with the text and tooltip 'master'
    #>
    param (
        [Parameter(Position = 0, ValueFromPipelineByPropertyName = $true, Mandatory, ValueFromPipeline)]
        [ValidateNotNullOrEmpty()]
        [string]
        $CompletionText,

        [Parameter(Position = 1, ValueFromPipelineByPropertyName = $true)]
        [string]
        $ToolTip,

        [Parameter(Position = 2, ValueFromPipelineByPropertyName = $true)]
        [string]
        $ListItemText,

        [System.Management.Automation.CompletionResultType]
        $CompletionResultType = [System.Management.Automation.CompletionResultType]::ParameterValue,

        [switch]
        $NoQuotes = $false
    )

    process {
        $toolTipToUse = if ($ToolTip -eq '') { $CompletionText }
        else { $ToolTip }
        $listItemToUse = if ($ListItemText -eq '') { $CompletionText }
        else { $ListItemText }

        # If the caller explicitly requests that quotes
        # not be included, via the -NoQuotes parameter,
        # then skip adding quotes.

        if ($CompletionResultType -eq [System.Management.Automation.CompletionResultType]::ParameterValue -and -not $NoQuotes) {
            # Add single quotes for the caller in case they are needed.
            # We use the parser to robustly determine how it will treat
            # the argument.  If we end up with too many tokens, or if
            # the parser found something expandable in the results, we
            # know quotes are needed.

            $tokens = $null
            $null = [System.Management.Automation.Language.Parser]::ParseInput("echo $CompletionText", [ref]$tokens, [ref]$null)
            if ($tokens.Length -ne 3 -or ($tokens[1] -is [System.Management.Automation.Language.StringExpandableToken] -and $tokens[1].Kind -eq [System.Management.Automation.Language.TokenKind]::Generic)) {
                $CompletionText = "'$CompletionText'"
            }
        }
        return New-Object System.Management.Automation.CompletionResult($CompletionText, $listItemToUse, $CompletionResultType, $toolTipToUse.Trim())
    }
}

(Get-Item Function:\New-DbaTeppCompletionResult).Visibility = "Private"

tools\dbatools\internal\functions\Invoke-ManagedComputerCommand.ps1

function Invoke-ManagedComputerCommand {
    <#
        .SYNOPSIS
            Runs wmi commands against a target system.

        .DESCRIPTION
            Runs wmi commands against a target system.
            Either directly or over PowerShell remoting.

        .PARAMETER ComputerName
            The target to run against. Must be resolvable.

        .PARAMETER Credential
            Credentials to use when using PowerShell remoting.

        .PARAMETER ScriptBlock
            The scriptblock to execute.
            Use $wmi to access the smo wmi object.
            Must not include a param block!

        .PARAMETER ArgumentList
            The arguments to pass to your scriptblock.
            Access them within the scriptblock using the automatic variable $args

        .PARAMETER EnableException
            Left in for legacy reasons. This command will throw no matter what
       #>
    [CmdletBinding()]
    param (
        [Parameter(Mandatory)]
        [Alias("Server")]
        [dbainstanceparameter]$ComputerName,
        [PSCredential]$Credential,
        [Parameter(Mandatory)]
        [scriptblock]$ScriptBlock,
        [string[]]$ArgumentList,
        [switch][Alias('Silent')]
        $EnableException # Left in for legacy but this command needs to throw
    )

    $computer = $ComputerName.ComputerName

    $null = Test-ElevationRequirement -ComputerName $computer -EnableException $true

    $resolved = Resolve-DbaNetworkName -ComputerName $computer -Turbo
    $ipaddr = $resolved.IpAddress
    $ArgumentList += $ipaddr

    [scriptblock]$setupScriptBlock = {
        $ipaddr = $args[$args.GetUpperBound(0)]

        # Just in case we go remote, ensure the assembly is loaded
        [void][System.Reflection.Assembly]::LoadWithPartialName('Microsoft.SqlServer.SqlWmiManagement')
        $wmi = New-Object Microsoft.SqlServer.Management.Smo.Wmi.ManagedComputer $ipaddr
        $null = $wmi.Initialize()
    }

    $prescriptblock = $setupScriptBlock.ToString()
    $postscriptblock = $ScriptBlock.ToString()

    $scriptblock = [ScriptBlock]::Create("$prescriptblock  $postscriptblock")
    Write-Message -Level Verbose -Message "Connecting to SQL WMI on $computer."

    try {
        Invoke-Command2 -ScriptBlock $ScriptBlock -ArgumentList $ArgumentList -Credential $Credential -ErrorAction Stop
    } catch {
        Write-Message -Level Verbose -Message "Local connection attempt to $computer failed. Connecting remotely."

        # For surely resolve stuff, and going by default with kerberos, this needs to match FullComputerName
        $hostname = $resolved.FullComputerName

        Invoke-Command2 -ScriptBlock $ScriptBlock -ArgumentList $ArgumentList -ComputerName $hostname -ErrorAction Stop
    }
}

tools\dbatools\internal\functions\Invoke-Program.ps1

function Invoke-Program {
    <#
    .SYNOPSIS
        Invokes a remote execution of a file using specific credentials.

    .DESCRIPTION
    Based on https://github.com/adbertram/PSSqlUpdater
    Invokes a remote execution of a file passing credentials over the network to avoid a double-hop issue
    and gain privileges necessary to execute any kind of executables.

    First it tries to initialize a CredSSP connection by configuring both Client and Server to run CredSSP connections.

    If CredSSP connection fails, it falls back to a less secure PSSessionConfiguration workaround, which registers
    a temporary session configuration on a target machine (PS3.0+) and re-creates current PSSession to use remote
    configuration by default.

    .PARAMETER ComputerName
        Remote computer name

    .PARAMETER Path
        Path to the executable

    .PARAMETER Credential
        Credential object that will be used for authentication

    .PARAMETER ArgumentList
        List of arguments to pass to the executable

    .PARAMETER ExpandStrings
        The strings in ArgumentList and WorkingDirectory will be evaluated remotely on a target machine.

    .PARAMETER SuccessReturnCode
        Return codes that will be acknowledged as successful execution. Defaults to 0 (success), 3010 (restart required)

    .PARAMETER WorkingDirectory
        Working directory for the process

    .PARAMETER UsePSSessionConfiguration
        Skips the CredSSP attempts and proceeds directly to PSSessionConfiguration connections

    .EXAMPLE
        PS C:\> Invoke-Program -ComputerName ServerA -Credentials $cred -Path "C:\temp\setup.exe" -ArgumentList '/quiet' -WorkingDirectory 'C:'

        Starts "setup.exe /quiet" on ServerA under provided credentials. C:\ will be set as a working directory.

    #>
    [CmdletBinding()]
    [OutputType([System.Management.Automation.PSObject])]
    param
    (
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [string]$Path,
        [DbaInstanceParameter]$ComputerName = $env:COMPUTERNAME,
        [pscredential]$Credential,
        [ValidateNotNullOrEmpty()]
        [string[]]$ArgumentList,
        [bool]$ExpandStrings = $false,
        [ValidateNotNullOrEmpty()]
        [string]$WorkingDirectory,
        [ValidateNotNullOrEmpty()]
        [uint32[]]$SuccessReturnCode = @(0, 3010),
        [switch]$Raw,
        [bool]$UsePSSessionConfiguration = (Get-DbatoolsConfigValue -Name 'psremoting.Sessions.UsePSSessionConfiguration' -Fallback $false),
        [bool]$EnableException = $EnableException
    )
    process {
        $startProcess = {
            Param  (
                $Path,
                $ArgumentList,
                $ExpandStrings,
                $WorkingDirectory,
                $SuccessReturnCode
            )
            $output = [pscustomobject]@{
                ComputerName     = $env:COMPUTERNAME
                Path             = $Path
                ArgumentList     = $ArgumentList
                WorkingDirectory = $WorkingDirectory
                Successful       = $false
                stdout           = $null
                stderr           = $null
                ExitCode         = $null
            }
            $processStartInfo = New-Object System.Diagnostics.ProcessStartInfo
            $processStartInfo.FileName = $Path
            if ($ArgumentList) {
                $processStartInfo.Arguments = $ArgumentList
                if ($ExpandStrings) {
                    $processStartInfo.Arguments = $ExecutionContext.InvokeCommand.ExpandString($ArgumentList)
                }
            }
            if ($WorkingDirectory) {
                $processStartInfo.WorkingDirectory = $WorkingDirectory
                if ($ExpandStrings) {
                    $processStartInfo.WorkingDirectory = $ExecutionContext.InvokeCommand.ExpandString($WorkingDirectory)
                }
            }
            $processStartInfo.UseShellExecute = $false # This is critical for installs to function on core servers
            $processStartInfo.CreateNoWindow = $true
            $processStartInfo.RedirectStandardError = $true
            $processStartInfo.RedirectStandardOutput = $true
            $ps = New-Object System.Diagnostics.Process
            $ps.StartInfo = $processStartInfo
            $started = $ps.Start()
            if ($started) {
                $stdOut = $ps.StandardOutput.ReadToEnd()
                $stdErr = $ps.StandardError.ReadToEnd()
                $ps.WaitForExit()
                # assign output object values
                $output.stdout = $stdOut
                $output.stderr = $stdErr
                $output.ExitCode = $ps.ExitCode
                # Check the exit code of the process to see if it succeeded.
                if ($ps.ExitCode -in $SuccessReturnCode) {
                    $output.Successful = $true
                }
                $output
            }
        }

        $argList = @(
            $Path,
            $ArgumentList,
            $ExpandStrings,
            $WorkingDirectory,
            $SuccessReturnCode
        )

        $params = @{
            ScriptBlock  = $startProcess
            ArgumentList = $argList
            ComputerName = $ComputerName
            Credential   = $Credential
        }

        Write-Message -Level Debug -Message "Acceptable success return codes are [$($SuccessReturnCode -join ',')]"

        if (!$ComputerName.IsLocalHost) {
            if (!$Credential) {
                Stop-Function -Message "Explicit credentials are required when running agains remote hosts. Make sure to define the -Credential parameter"
                return
            }
            # Try to use CredSSP first, otherwise fall back to PSSession configurations with custom user/password
            if (!$UsePSSessionConfiguration) {
                Write-Message -Level Verbose -Message "Attempting to configure CredSSP for remote connections"
                Initialize-CredSSP -ComputerName $ComputerName -Credential $Credential -EnableException $false
                $sspSuccessful = $true
                Write-Message -Level Verbose -Message "Starting process [$Path] with arguments [$ArgumentList] on $ComputerName through CredSSP"
                try {
                    $output = Invoke-Command2 @params -Authentication CredSSP -Raw -ErrorAction Stop
                } catch [System.Management.Automation.Remoting.PSRemotingTransportException] {
                    Write-Message -Level Warning -Message "CredSSP to $ComputerName unsuccessful, falling back to PSSession configurations | $($_.Exception.Message)"
                    $sspSuccessful = $false
                } catch {
                    Stop-Function -Message "Remote CredSSP execution failed" -ErrorRecord $_
                    return
                }
            }
            if ($UsePSSessionConfiguration -or !$sspSuccessful) {
                $configuration = Register-RemoteSessionConfiguration -Computer $ComputerName -Credential $Credential -Name dbatoolsInvokeProgram
                if ($configuration.Successful) {
                    Write-Message -Level Debug -Message "RemoteSessionConfiguration ($($configuration.Name)) was successful, using it."
                    Write-Message -Level Verbose -Message "Starting process [$Path] with arguments [$ArgumentList] on $ComputerName using PS session configuration"
                    try {
                        $output = Invoke-Command2 @params -ConfigurationName $configuration.Name -Raw -ErrorAction Stop
                    } catch {
                        Stop-Function -Message "Remote SessionConfiguration execution failed" -ErrorRecord $_
                        return
                    } finally {
                        # Unregister PSRemote configurations once completed. It's slow, but necessary - otherwise we're gonna leave unnesessary junk on a remote
                        Write-Message -Level Verbose -Message "Unregistering any leftover PSSession Configurations on $ComputerName"
                        $unreg = Unregister-RemoteSessionConfiguration -ComputerName $ComputerName -Credential $Credential -Name dbatoolsInvokeProgram
                        if (!$unreg.Successful) {
                            Stop-Function -Message "Failed to unregister PSSession Configurations on $ComputerName | $($configuration.Status)" -EnableException $false
                        }
                    }
                } else {
                    Stop-Function -Message "RemoteSession configuration unsuccessful, no valid connection options found | $($configuration.Status)"
                    return
                }
            }
        } else {
            Write-Message -Level Verbose -Message "Starting process [$Path] with arguments [$ArgumentList] locally"
            $output = Invoke-Command2 @params -Raw -ErrorAction Stop
        }
        Write-Message -Level Debug -Message "Process [$Path] returned exit code $($output.ExitCode)"
        if ($Raw) {
            if ($output.Successful) {
                return $output.stdout
            } else {
                $message = "Error running [$Path]: exited with errorcode $($output.ExitCode)`:`n$($output.StdErr)`n$($output.StdOut)"
                Stop-Function -Message "Program execution failed | $message"
            }
        } else {
            # Select * to ensure that the object is a generic object and not a de-serialized one from a remote session
            return $output | Select-Object -Property * -ExcludeProperty PSComputerName, RunspaceId | Select-DefaultView -Property ComputerName, Path, Successful, ExitCode, stdout
        }
    }
}

tools\dbatools\internal\functions\Test-PendingReboot.ps1

function Test-PendingReboot {
    <#
        .SYNOPSIS
            Based on https://github.com/adbertram/PSSqlUpdater
            This function tests various registry values to see if the local computer is pending a reboot
        .NOTES
            Inspiration from: https://gallery.technet.microsoft.com/scriptcenter/Get-PendingReboot-Query-bdb79542
        .EXAMPLE
            PS> Test-PendingReboot

            This example checks various registry values to see if the local computer is pending a reboot.
    #>
    [OutputType([bool])]
    [CmdletBinding()]
    param
    (
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [DbaInstanceParameter]$ComputerName,
        [ValidateNotNullOrEmpty()]
        [pscredential]$Credential,
        [bool]$EnableException = $EnableException
    )
    process {
        try {
            $icmParams = @{
                ComputerName = $ComputerName.ComputerName
                Raw          = $true
            }
            if ($PSBoundParameters.ContainsKey('Credential')) {
                $icmParams.Credential = $Credential
            }

            $OperatingSystem = Get-DbaCmObject -ComputerName $ComputerName.ComputerName -ClassName Win32_OperatingSystem

            # If Vista/2008 & Above query the CBS Reg Key
            If ($OperatingSystem.BuildNumber -ge 6001) {
                $PendingReboot = Invoke-Command2 @icmParams -ScriptBlock { Get-ItemProperty -Path 'HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\Component Based Servicing' -Name 'RebootPending' -ErrorAction SilentlyContinue }
                if ($PendingReboot) {
                    Write-Message -Level Verbose -Message 'Reboot pending detected in the Component Based Servicing registry key'
                    return $true
                }
            }

            # Query WUAU from the registry
            $PendingReboot = Invoke-Command2 @icmParams -ScriptBlock { Get-ItemProperty -Path 'HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update' -Name 'RebootRequired' -ErrorAction SilentlyContinue }
            if ($PendingReboot) {
                Write-Message -Level Verbose -Message 'WUAU has a reboot pending'
                return $true
            }

            # Query PendingFileRenameOperations from the registry
            $PendingReboot = Invoke-Command2 @icmParams -ScriptBlock { Get-ItemProperty -Path 'HKLM:\SYSTEM\CurrentControlSet\Control\Session Manager' -Name 'PendingFileRenameOperations' -ErrorAction SilentlyContinue }
            if ($PendingReboot -and $PendingReboot.PendingFileRenameOperations) {
                Write-Message -Level Verbose -Message 'Reboot pending in the PendingFileRenameOperations registry value'
                return $true
            }
            return $false
        } catch {
            Stop-Function -Message "Failed to obtain any intormation from remote registry on $ComputerName" -ErrorRecord $_
        }
    }
}

tools\dbatools\internal\functions\Test-PSRemoting.ps1

#requires -version 3.0

function Test-PSRemoting {
    <#
    Jeff Hicks
    https://www.petri.com/test-network-connectivity-powershell-test-connection-cmdlet
    #>
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUsePSCredentialType", "")]
    [Cmdletbinding()]
    param(
        [Parameter(Position = 0, Mandatory, ValueFromPipeline)]
        [DbaInstance]$ComputerName,
        $Credential = [System.Management.Automation.PSCredential]::Empty,
        [Alias('Silent')]
        [switch]$EnableException
    )

    process {
        Write-Message -Level VeryVerbose -Message "Testing $($ComputerName.Computername)"
        try {
            $null = Test-WSMan -ComputerName $ComputerName.ComputerName -Credential $Credential -Authentication Default -ErrorAction Stop
            $true
        } catch {
            $false
            Stop-Function -Message "Testing $($ComputerName.Computername)" -Target $ComputerName -ErrorRecord $_
        }

    } #process

} #close function

tools\dbatools\internal\functions\Test-SqlAgent.ps1

function Test-SqlAgent {
    <#
    .SYNOPSIS
        Internal function. Checks to see if SQL Server Agent is running on a server.
    #>
    [CmdletBinding()]
    param (
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [Alias("ServerInstance", "SqlServer")]
        [object]$SqlInstance,
        [PSCredential]$SqlCredential
    )

    if ($SqlInstance.GetType() -ne [Microsoft.SqlServer.Management.Smo.Server]) {
        $SqlInstance = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential
    }

    if ($null -eq $SqlInstance.JobServer) { return $false }
    try { $null = $SqlInstance.JobServer.script(); return $true }
    catch { return $false }
}

tools\dbatools\internal\functions\Test-SqlLoginAccess.ps1

function Test-SqlLoginAccess {
    <#
    .SYNOPSIS
        Internal function. Ensures login has access on SQL Server.
    #>
    [CmdletBinding()]
    param (
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [Alias("ServerInstance", "SqlServer")]
        [object]$SqlInstance,
        [PSCredential]$SqlCredential,
        [string]$Login
        #[switch]$Detailed - can return if its a login or just has access
    )

    if ($SqlInstance.GetType() -ne [Microsoft.SqlServer.Management.Smo.Server]) {
        $SqlInstance = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential
    }

    if (($SqlInstance.Logins.Name) -notcontains $Login) {
        try {
            $rows = $SqlInstance.ConnectionContext.ExecuteScalar("EXEC xp_logininfo '$Login'")

            if (($rows | Measure-Object).Count -eq 0) {
                return $false
            }
        } catch {
            return $false
        }
    }
    return $true
}

tools\dbatools\internal\functions\Test-SqlQueryComplete.ps1

function Test-SqlQueryComplete {
    param (
        [Alias("SqlInstance", "SqlServer")]
        [object]$server,
        [string]$sql,
        [switch]$checkpid
    )

    if ($checkpid) {
        $sqlpid = " and session_id = $sqlpid"
    }

    $sqlpid = $server.ConnectionContext.ProcessID
    $sqlpid = " and session_id = $sqlpid"
    $sql = $sql.Replace("'", "''")
    $testsql = "select sqltext.text FROM sys.dm_exec_requests req CROSS APPLY sys.dm_exec_sql_text(sql_handle) AS sqltext where text = '$sql' $sqlpid"

    if ($server.ConnectionContext.ExecuteScalar($testsql) -ne $null) {
        return $false
    } else {
        return $true
    }
}

tools\dbatools\internal\functions\Test-SqlSa.ps1

function Test-SqlSa {
    <#
    .SYNOPSIS
        Internal function. Ensures sysadmin account access on SQL Server.
    #>
    [CmdletBinding()]
    param (
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [Alias("ServerInstance", "SqlServer")]
        [object]$SqlInstance,
        [PSCredential]$SqlCredential
    )

    try {

        if ($SqlInstance.GetType() -eq [Microsoft.SqlServer.Management.Smo.Server]) {
            return ($SqlInstance.ConnectionContext.FixedServerRoles -match "SysAdmin")
        }

        $server = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential
        return ($server.ConnectionContext.FixedServerRoles -match "SysAdmin")
    } catch { return $false }
}

tools\dbatools\internal\functions\Update-SqlDbOwner.ps1

function Update-SqlDbOwner {
    <#
    .SYNOPSIS
        Internal function. Updates specified database dbowner.
    #>
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseShouldProcessForStateChangingFunctions", "")]
    [CmdletBinding()]
    param (
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [object]$Source,
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [object]$Destination,
        [string]$DbName,
        [PSCredential]$SourceSqlCredential,
        [PSCredential]$DestinationSqlCredential,
        [switch]$EnableException
    )

    $sourceServer = Connect-SqlInstance -SqlInstance $Source -SqlCredential $SourceSqlCredential
    $destServer = Connect-SqlInstance -SqlInstance $Destination -SqlCredential $DestinationSqlCredential

    $source = $sourceServer.DomainInstanceName
    $destination = $destServer.DomainInstanceName

    if ($DbName.length -eq 0) {
        $databases = ($sourceServer.Databases | Where-Object { $destServer.databases.name -contains $_.name -and $_.IsSystemObject -eq $false }).Name
    } else { $databases = $DbName }

    foreach ($DbName in $databases) {
        $destdb = $destServer.databases[$DbName]
        $dbowner = $sourceServer.databases[$DbName].owner

        if ($destdb.owner -ne $dbowner) {
            if ($destdb.Status -ne 'Normal') {
                Write-Message -Level Output -Message "Database status not normal. Skipping dbowner update."
                continue
            }
            if ((Get-DbaAgDatabase -SqlInstance $DestServer -Database $dbName)) {
                Write-Message -Level Verbose -Message "Database [$dbName] is part of an availability group. Skipping."
                continue
            }
            
            if ($null -eq $dbowner -or $null -eq $destServer.logins[$dbowner]) {
                try {
                    $dbowner = ($destServer.logins | Where-Object { $_.id -eq 1 }).Name
                } catch {
                    $dbowner = "sa"
                }
            }

            try {
                if ($destdb.ReadOnly -eq $true) {
                    $changeroback = $true
                    Update-SqlDbReadOnly $destServer $DbName $false
                }

                $destdb.SetOwner($dbowner)
                Write-Output "Changed $DbName owner to $dbowner"

                if ($changeroback) {
                    Update-SqlDbReadOnly $destServer $DbName $true
                    $changeroback = $null
                }
            } catch {
                Stop-Function -Message "Failed to update $DbName owner to $dbowner." -ErrorRecord $_
            }
        } else {
            Write-Message -Level Verbose -Message "Proper owner already set on $DbName"
        }
    }
}

tools\dbatools\internal\functions\Update-SqlDbReadOnly.ps1

function Update-SqlDbReadOnly {
    <#
    .SYNOPSIS
        Internal function. Updates specified database to read-only or read-write. Necessary because SMO doesn't appear to support NO_WAIT.
    #>
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseShouldProcessForStateChangingFunctions", "")]
    [CmdletBinding()]
    param (
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [Alias("ServerInstance", "SqlServer")]
        [object]$SqlInstance,
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [string]$dbname,
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [bool]$readonly
    )

    if ($readonly) {
        Stop-DbaProcess -SqlInstance $SqlInstance -Database $dbname
        $sql = "ALTER DATABASE [$dbname] SET READ_ONLY WITH NO_WAIT"
    } else {
        $sql = "ALTER DATABASE [$dbname] SET READ_WRITE WITH NO_WAIT"
    }

    try {
        $server = Connect-SqlInstance -SqlInstance $SqlInstance
        $null = $server.Query($sql)
        Write-Message -Level Verbose -Message "Changed ReadOnly status to $readonly for $dbname on $($server.name)"
        return $true
    } catch {
        Write-Message -Level Warning "Could not change readonly status for $dbname on $($server.name)"
        return $false
    }
}

tools\dbatools\internal\functions\Write-ProgressHelper.ps1

function Write-ProgressHelper {
    # thanks adam!
    # https://www.adamtheautomator.com/building-progress-bar-powershell-scripts/
    param (
        [int]$StepNumber,
        [string]$Activity,
        [string]$Message,
        [int]$TotalSteps,
        [switch]$ExcludePercent
    )

    $caller = (Get-PSCallStack)[1].Command

    if (-not $Activity) {
        $Activity = switch ($caller) {
            "Export-DbaInstance" {
                "Performing Instance Export for $instance"
            }
            "Install-DbaSqlWatch" {
                "Installing SQLWatch"
            }
            "Invoke-DbaDbLogShipRecovery" {
                "Performing log shipping recovery"
            }
            "Invoke-DbaDbLogShipRecovery" {
                "Performing log shipping recovery"
            }
            "Invoke-DbaDbMirroring" {
                "Setting up mirroring"
            }
            "New-DbaAvailabilityGroup" {
                "Adding new availability group"
            }
            "Sync-DbaAvailabilityGroup" {
                "Syncing availability group"
            }
            "Sync-DbaAvailabilityGroup" {
                "Syncing availability group"
            }
            default {
                "Executing $caller"
            }
        }
    }

    if ($ExcludePercent) {
        Write-Progress -Activity $Activity -Status $Message
    } else {
        if (-not $TotalSteps -and $caller -ne '<ScriptBlock>') {
            $TotalSteps = ([regex]::Matches((Get-Command -Module dbatools -Name $caller).Definition, "Write-ProgressHelper")).Count
        }
        if (-not $TotalSteps) {
            $percentComplete = 0
        } else {
            $percentComplete = ($StepNumber / $TotalSteps) * 100
        }
        Write-Progress -Activity $Activity -Status $Message -PercentComplete $percentComplete
    }
}

tools\dbatools\internal\maintenance\PSSession-Cleanup.ps1

$scriptBlock = {
    while ([Sqlcollaborative.Dbatools.Connection.ConnectionHost]::PSSessionCountExpired -gt 0) {
        $session = $null
        $session = [Sqlcollaborative.Dbatools.Connection.ConnectionHost]::PSSessionPurgeExpired()
        if ($null -ne $session) { $session | Remove-PSSession }
    }
}
Register-DbaMaintenanceTask -Name "pssession_cleanup" -ScriptBlock $scriptBlock -Delay (New-TimeSpan -Minutes 1) -Priority Low -Interval (New-TimeSpan -Minutes 1)

# Cleans up local references in the current runspace. All actual termination logic is handled by the task above
$script:pssession_cleanup_timer = New-Object System.Timers.TImer
$script:pssession_cleanup_timer.Interval = 60000
$null = Register-ObjectEvent -InputObject $script:pssession_cleanup_timer -EventName elapsed -SourceIdentifier dbatools_Timer -Action { Get-PSSession | Where-Object State -Like Closed | Remove-PSSession } -ErrorAction Ignore
$script:pssession_cleanup_timer.Start()

tools\dbatools\internal\maintenance\teppInsertTask.ps1

$scriptBlock = {
    $ModuleRoot = [Sqlcollaborative.Dbatools.dbaSystem.SystemHost]::ModuleBase

    $ExecutionContext.InvokeCommand.InvokeScript($false, ([scriptblock]::Create([io.file]::ReadAllText("$ModuleRoot\internal\functions\Register-DbaTeppScriptblock.ps1"))), $null, $null)
    $ExecutionContext.InvokeCommand.InvokeScript($false, ([scriptblock]::Create([io.file]::ReadAllText("$ModuleRoot\internal\functions\Register-DbaTeppInstanceCacheBuilder.ps1"))), $null, $null)

    foreach ($file in (Get-ChildItem "$ModuleRoot\internal\dynamicparams\*.ps1")) {
        $ExecutionContext.InvokeCommand.InvokeScript($false, ([scriptblock]::Create([io.file]::ReadAllText($file.FullName))), $null, $null)
    }

    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::CalculateTabExpansion()
}
Register-DbaMaintenanceTask -Name "teppInsertTask" -ScriptBlock $scriptBlock -Once

tools\dbatools\internal\scripts\message-transforms.ps1

Register-DbaMessageTransform -TargetType 'Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter' -ScriptBlock {
    $args[0].FullSmoName
}
Register-DbaMessageTransform -TargetType 'Microsoft.SqlServer.Management.Smo.Server' -ScriptBlock {
    ([Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter]$args[0]).FullSmoName
}

Register-DbaMessageTransform -ExceptionTypeFilter '*' -ScriptBlock {
    if ($args[0] -is [System.Data.SqlClient.SqlException]) { return $args[0] }

    $item = $args[0]
    while ($item.InnerException) {
        $item = $item.InnerException
        if ($item -is [System.Data.SqlClient.SqlException]) { return $item }
    }

    return $args[0]
}

tools\dbatools\internal\scripts\smoLibraryImport.ps1

$scriptBlock = {
    param (
        $ModuleRoot,

        $DllRoot,

        $DoCopy
    )

    function Copy-Assembly {
        [CmdletBinding()]
        param (
            [string]$ModuleRoot,
            [string]$DllRoot,
            [bool]$DoCopy,
            [string]$Name
        )
        $DllRoot = (Resolve-Path -Path $DllRoot)
        
        if (-not $DoCopy) {
            return
        }
        if ((Resolve-Path -Path "$ModuleRoot\bin\smo") -eq $DllRoot) {
            return
        }

        if (-not (Test-Path $DllRoot)) {
            $null = New-Item -Path $DllRoot -ItemType Directory -ErrorAction Ignore
        }

        Copy-Item -Path (Resolve-Path -Path "$ModuleRoot\bin\smo\$Name.dll") -Destination $DllRoot
    }
    
    #region Names
    if ($PSVersionTable.PSEdition -eq "Core") {
        $names = @(
            'Microsoft.Data.Tools.Sql.BatchParser',
            'Microsoft.SqlServer.ConnectionInfo',
            'Microsoft.SqlServer.Management.Dmf',
            'Microsoft.SqlServer.Management.PSProvider',
            'Microsoft.SqlServer.Management.PSSnapins',
            'Microsoft.SqlServer.Management.Sdk.Sfc',
            'Microsoft.SqlServer.Management.XEvent',
            'Microsoft.SqlServer.Management.XEventDbScoped',
            'Microsoft.SqlServer.Management.XEventDbScopedEnum',
            'Microsoft.SqlServer.Management.XEventEnum',
            'Microsoft.SqlServer.Smo',
            'Microsoft.SqlServer.SmoExtended',
            'Microsoft.SqlServer.SqlEnum',
            'System.Security.SecureString',
            'Microsoft.Data.Tools.Schema.Sql',
            'Microsoft.Data.Tools.Utilities',
            'Microsoft.SqlServer.Dac',
            'Microsoft.SqlServer.Dac.Extensions',
            'Microsoft.SqlServer.TransactSql.ScriptDom',
            'Microsoft.SqlServer.Types'
        )
    } else {
        $names = @(
            'Microsoft.SqlServer.Smo',
            'Microsoft.SqlServer.Dmf',
            'Microsoft.SqlServer.SqlWmiManagement',
            'Microsoft.SqlServer.ConnectionInfo',
            'Microsoft.SqlServer.SmoExtended',
            'Microsoft.SqlServer.Management.RegisteredServers',
            'Microsoft.SqlServer.Management.Sdk.Sfc',
            'Microsoft.SqlServer.SqlEnum',
            'Microsoft.SqlServer.RegSvrEnum',
            'Microsoft.SqlServer.WmiEnum',
            'Microsoft.SqlServer.ServiceBrokerEnum',
            'Microsoft.SqlServer.Management.Collector',
            'Microsoft.SqlServer.Management.CollectorEnum',
            'Microsoft.SqlServer.Management.Utility',
            'Microsoft.SqlServer.Management.UtilityEnum',
            'Microsoft.SqlServer.Management.HadrDMF',
            'Microsoft.SqlServer.VulnerabilityAssessment.Model',
            
            'Microsoft.SqlServer.BatchParser',
            'Microsoft.SqlServer.BatchParserClient',
            'Microsoft.SqlServer.BulkInsertTaskConnections',
            'Microsoft.SqlServer.DTSRuntimeWrap',
            'Microsoft.SqlServer.DtsServer.Interop',
            'Microsoft.SqlServer.DTSUtilities',
            'Microsoft.SqlServer.ForEachFileEnumeratorWrap',
            'Microsoft.SqlServer.ManagedDTS',
            'Microsoft.SqlServer.IntegrationServices.ODataConnectionManager',
            'Microsoft.SqlServer.IntegrationServices.ODataSrc',
            'Microsoft.SqlServer.PipelineHost',
            'Microsoft.SqlServer.PackageFormatUpdate',
            'Microsoft.SqlServer.Replication',
            'Microsoft.SqlServer.SqlCEDest',
            'Microsoft.SqlServer.SQLTask',
            'Microsoft.SqlServer.TxScript',
            'Microsoft.SqlServer.XE.Core',
            'Microsoft.SqlServer.XEvent.Configuration',
            'Microsoft.SqlServer.XEvent',
            'Microsoft.SqlServer.XEvent.Linq',
            'Microsoft.SqlServer.XmlSrc',
            'Microsoft.SqlServer.Rmo',
            'Microsoft.SqlServer.DTSPipelineWrap',
            'Microsoft.SqlServer.ScriptTask',
            
            'Accessibility',
            'EnvDTE',
            'Microsoft.AnalysisServices.AppLocal.Core',
            'Microsoft.AnalysisServices.AppLocal',
            'Microsoft.Azure.KeyVault.Core',
            'Microsoft.Data.Edm',
            'Microsoft.Data.OData',
            'Microsoft.Practices.TransientFaultHandling.Core',
            'Microsoft.DataTransfer.Common.Utils',
            'Microsoft.SqlServer.ASTasks',
            'Microsoft.SqlServer.ConnectionInfoExtended',
            'Microsoft.SqlServer.DataProfiler',
            'Microsoft.SqlServer.DataProfilingTask',
            'Microsoft.SqlServer.Diagnostics.STrace',
            'Microsoft.SqlServer.Dmf.Common',
            
            'Microsoft.SqlServer.DMQueryTask',
            'Microsoft.SqlServer.DTEnum',
            'Microsoft.SqlServer.Dts.Design',
            'Microsoft.SqlServer.Dts.DtsClient',
            'Microsoft.SqlServer.DtsMsg',
            'Microsoft.SqlServer.Edition',
            'Microsoft.SqlServer.ExecProcTask',
            'Microsoft.SqlServer.ExpressionTask',
            'Microsoft.SqlServer.FileSystemTask',
            'Microsoft.SqlServer.ForEachADOEnumerator',
            'Microsoft.SqlServer.ForEachFromVarEnumerator',
            'Microsoft.SqlServer.ForEachNodeListEnumerator',
            'Microsoft.SqlServer.ForEachSMOEnumerator',
            'Microsoft.SqlServer.FtpTask',
            'Microsoft.SqlServer.GridControl',
            'Microsoft.SqlServer.Instapi',
            'Microsoft.SqlServer.IntegrationServices.ClusterManagement',
            'Microsoft.SqlServer.IntegrationServices.Common.ObjectModel',
            'Microsoft.SqlServer.IntegrationServices.ISServerDBUpgrade',
            'Microsoft.SqlServer.IntegrationServices.Server.Common',
            'Microsoft.SqlServer.IntegrationServices.Server',
            'Microsoft.SqlServer.IntegrationServices.Server.IPC',
            'Microsoft.SqlServer.IntegrationServices.server.shared',
            'Microsoft.SqlServer.IntegrationServices.TaskScheduler',
            'Microsoft.SqlServer.ManagedConnections',
            'Microsoft.SqlServer.Management.CollectorTasks',
            'Microsoft.SqlServer.Management.HelpViewer',
            'Microsoft.SqlServer.Management.IntegrationServices',
            'Microsoft.SqlServer.Management.IntegrationServicesEnum',
            'Microsoft.SqlServer.Management.Sdk.Scripting',
            'Microsoft.SqlServer.Management.Sdk.SqlStudio',
            'Microsoft.SqlServer.Management.SmartAdminPolicies',
            'Microsoft.SqlServer.Management.SqlParser',
            'Microsoft.SqlServer.Management.SystemMetadataProvider',
            'Microsoft.SqlServer.Management.XEvent',
            'Microsoft.SqlServer.Management.XEventDbScoped',
            'Microsoft.SqlServer.Management.XEventDbScopedEnum',
            'Microsoft.SqlServer.Management.XEventEnum',
            'Microsoft.SqlServer.MSMQTask',
            'Microsoft.SqlServer.PipelineXML',
            'Microsoft.SqlServer.PolicyEnum',
            'Microsoft.SqlServer.Replication.BusinessLogicSupport',
            'Microsoft.SqlServer.SendMailTask',
            'Microsoft.SqlServer.SqlClrProvider',
            'Microsoft.SqlServer.SQLTaskConnectionsWrap',
            'Microsoft.SqlServer.SqlTDiagm',
            'Microsoft.SqlServer.SString',
            'Microsoft.SqlServer.TransferDatabasesTask',
            'Microsoft.SqlServer.TransferErrorMessagesTask',
            'Microsoft.SqlServer.TransferJobsTask',
            'Microsoft.SqlServer.TransferLoginsTask',
            'Microsoft.SqlServer.TransferObjectsTask',
            'Microsoft.SqlServer.TransferSqlServerObjectsTask',
            'Microsoft.SqlServer.TransferStoredProceduresTask',
            'Microsoft.SqlServer.Types',
            'Microsoft.SqlServer.Types.resources',
            'Microsoft.SqlServer.VSTAScriptingLib',
            'Microsoft.SqlServer.WebServiceTask',
            'Microsoft.SqlServer.WMIDRTask',
            'Microsoft.SqlServer.WMIEWTask',
            'Microsoft.SqlServer.XMLTask',
            'Microsoft.SqlServer.Dmf.Adapters',
            'Microsoft.SqlServer.DmfSqlClrWrapper'
        )
    }
    #endregion Names

    foreach ($name in $names) {
        Copy-Assembly -ModuleRoot $ModuleRoot -DllRoot $DllRoot -DoCopy $DoCopy -Name $name
    }
    if ($PSVersionTable.PSEdition -eq "Core") {
        foreach ($name in $names) {
            Add-Type -Path (Resolve-Path -Path "$DllRoot\coreclr\$name.dll")
        }
    } else {
        foreach ($name in $names) {
            Add-Type -Path (Resolve-Path -Path "$DllRoot\$name.dll")
        }
    }
}

$smo = (Resolve-Path -Path "$script:DllRoot\smo")

if ($script:serialImport) {
    $scriptBlock.Invoke($script:PSModuleRoot, "$script:DllRoot\smo", (-not $script:strictSecurityMode))
} else {
    $script:smoRunspace = [System.Management.Automation.PowerShell]::Create()
    if ($script:smoRunspace.Runspace.Name) {
        try { $script:smoRunspace.Runspace.Name = "dbatools-import-smo" }
        catch { }
    }
    $script:smoRunspace.AddScript($scriptBlock).AddArgument($script:PSModuleRoot).AddArgument($smo).AddArgument((-not $script:strictSecurityMode))
    $script:smoRunspace.BeginInvoke()
}

tools\dbatools\internal\scripts\updateTeppAsync.ps1

$scriptBlock = {
    $script:___ScriptName = 'dbatools-teppasynccache'

    #region Utility Functions
    function Get-PriorityServer {
        [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::InstanceAccess.Values | Where-Object -Property LastUpdate -LT (New-Object System.DateTime(1, 1, 1, 1, 1, 1))
    }

    function Get-ActionableServer {
        [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::InstanceAccess.Values | Where-Object -Property LastUpdate -LT ((Get-Date) - ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::TeppUpdateInterval)) | Where-Object -Property LastUpdate -GT ((Get-Date) - ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::TeppUpdateTimeout))
    }

    function Update-TeppCache {
        [CmdletBinding()]
        param (
            [Parameter(ValueFromPipeline)]
            $ServerAccess
        )

        begin {

        }
        process {
            if ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::TeppUdaterStopper) { break }

            foreach ($instance in $ServerAccess) {
                if ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::TeppUdaterStopper) { break }
                $server = New-Object Microsoft.SqlServer.Management.Smo.Server($instance.ConnectionObject)
                try {
                    $server.ConnectionContext.Connect()
                } catch {
                    continue
                }

                $FullSmoName = ([Sqlcollaborative.Dbatools.Parameter.DbaInstanceParameter]$server).FullSmoName.ToLower()

                foreach ($scriptBlock in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::TeppGatherScriptsFast)) {
                    # Workaround to avoid stupid issue with scriptblock from different runspace
                    [ScriptBlock]::Create($scriptBlock).Invoke()
                }

                foreach ($scriptBlock in ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::TeppGatherScriptsSlow)) {
                    # Workaround to avoid stupid issue with scriptblock from different runspace
                    [ScriptBlock]::Create($scriptBlock).Invoke()
                }

                $server.ConnectionContext.Disconnect()

                $instance.LastUpdate = Get-Date
            }
        }
        end {

        }
    }
    #endregion Utility Functions

    try {
        #region Main Execution
        while ($true) {
            # This portion is critical to gracefully closing the script
            if ([Sqlcollaborative.Dbatools.Runspace.RunspaceHost]::Runspaces[$___ScriptName.ToLower()].State -notlike "Running") {
                break
            }

            Get-PriorityServer | Update-TeppCache

            Get-ActionableServer | Update-TeppCache

            Start-Sleep -Seconds 5
        }
        #endregion Main Execution
    } catch { }
    finally {
        [Sqlcollaborative.Dbatools.Runspace.RunspaceHost]::Runspaces[$___ScriptName.ToLower()].SignalStopped()
    }
}

Register-DbaRunspace -ScriptBlock $scriptBlock -Name "dbatools-teppasynccache"
if (-not ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::TeppAsyncDisabled -or [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::TeppDisabled)) {
    Start-DbaRunspace -Name "dbatools-teppasynccache"
}

tools\dbatools\LICENSE

tools\dbatools\optional\Compress-Archive.ps1

if ($PSVersionTable.PSVersion.Major -lt 5) {

    <#
Copied from the Microsoft Module: Microsoft.PowerShell.Archive
Which ships with PowerShell Version 5 but will run under v3.
    #>



    function Compress-Archive {
        <#
            .SYNOPSIS
                Creates an archive, or zipped file, from specified files and folders.

            .DESCRIPTION
                The Compress-Archive cmdlet creates a zipped (or compressed) archive file from one or more specified files or folders. An archive file allows multiple files to be packaged, and optionally compressed, into a single zipped file for easier distribution and storage. An archive file can be compressed by using the compression algorithm specified by the CompressionLevel parameter.

                Because Compress-Archive relies upon the Microsoft .NET Framework API System.IO.Compression.ZipArchive to compress files, the maximum file size that you can compress by using Compress-Archive is currently 2 GB. This is a limitation of the underlying API.

            .PARAMETER Path
                Specifies the path or paths to the files that you want to add to the archive zipped file. This parameter can accept wildcard characters. Wildcard characters allow you to add all files in a folder to your zipped archive file. To specify multiple paths, and include files in multiple locations in your output zipped file, use commas to separate the paths.

            .PARAMETER LiteralPath
                Specifies the path or paths to the files that you want to add to the archive zipped file. Unlike the Path parameter, the value of LiteralPath is used exactly as it is typed. No characters are interpreted as wildcards. If the path includes escape characters, enclose each escape character in single quotation marks, to instruct Windows PowerShell not to interpret any characters as escape sequences. To specify multiple paths, and include files in multiple locations in your output zipped file, use commas to separate the paths.

            .PARAMETER DestinationPath
                Specifies the path to the archive output file. This parameter is required. The specified DestinationPath value should include the desired name of the output zipped file; it specifies either the absolute or relative path to the zipped file. If the file name specified in DestinationPath does not have a .zip file name extension, the cmdlet adds a .zip file name extension.

            .PARAMETER CompressionLevel
                Specifies how much compression to apply when you are creating the archive file. Faster compression requires less time to create the file, but can result in larger file sizes. The acceptable values for this parameter are:

                - Fastest. Use the fastest compression method available to decrease processing time; this can result in larger file sizes.
                - NoCompression. Do not compress the source files.
                - Optimal. Processing time is dependent on file size.

                If this parameter is not specified, the command uses the default value, Optimal.

            .PARAMETER Update
                Updates the specified archive by replacing older versions of files in the archive with newer versions of files that have the same names. You can also add this parameter to add files to an existing archive.

            .PARAMETER Force
                @{Text=}

            .PARAMETER Confirm
                Prompts you for confirmation before running the cmdlet.

            .PARAMETER WhatIf
                Shows what would happen if the cmdlet runs. The cmdlet is not run.

            .EXAMPLE
                Example 1: Create an archive file

                PS C:\>Compress-Archive -LiteralPath C:\Reference\Draftdoc.docx, C:\Reference\Images\diagram2.vsd -CompressionLevel Optimal -DestinationPath C:\Archives\Draft.Zip

                This command creates a new archive file, Draft.zip, by compressing two files, Draftdoc.docx and diagram2.vsd, specified by the LiteralPath parameter. The compression level specified for this operation is Optimal.

            .EXAMPLE
                Example 2: Create an archive with wildcard characters

                PS C:\>Compress-Archive -Path C:\Reference\* -CompressionLevel Fastest -DestinationPath C:\Archives\Draft

                This command creates a new archive file, Draft.zip, in the C:\Archives folder. Note that though the file name extension .zip was not added to the value of the DestinationPath parameter, Windows PowerShell appends this to the specified archive file name automatically. The new archive file contains every file in the C:\Reference folder, because a wildcard character was used in place of specific file names in the Path parameter. The specified compression level is Fastest, which might result in a larger output file, but compresses a large number of files faster.

            .EXAMPLE
                Example 3: Update an existing archive file

                PS C:\>Compress-Archive -Path C:\Reference\* -Update -DestinationPath C:\Archives\Draft.Zip

                This command updates an existing archive file, Draft.Zip, in the C:\Archives folder. The command is run to update Draft.Zip with newer versions of existing files that came from the C:\Reference folder, and also to add new files that have been added to C:\Reference since Draft.Zip was initially created.

            .EXAMPLE
                Example 4: Create an archive from an entire folder

                PS C:\>Compress-Archive -Path C:\Reference -DestinationPath C:\Archives\Draft

                This command creates an archive from an entire folder, C:\Reference. Note that though the file name extension .zip was not added to the value of the DestinationPath parameter, Windows PowerShell appends this to the specified archive file name automatically.
        #>
        [CmdletBinding(DefaultParameterSetName = "Path", SupportsShouldProcess, HelpUri = "http://go.microsoft.com/fwlink/?LinkID=393252")]
        param
        (
            [parameter (Mandatory, Position = 0, ParameterSetName = "Path", ValueFromPipeline, ValueFromPipelineByPropertyName = $true)]
            [parameter (Mandatory, Position = 0, ParameterSetName = "PathWithForce", ValueFromPipeline, ValueFromPipelineByPropertyName = $true)]
            [parameter (Mandatory, Position = 0, ParameterSetName = "PathWithUpdate", ValueFromPipeline, ValueFromPipelineByPropertyName = $true)]
            [ValidateNotNullOrEmpty()]
            [string[]]
            $Path,

            [parameter (Mandatory, ParameterSetName = "LiteralPath", ValueFromPipeline = $false, ValueFromPipelineByPropertyName = $true)]
            [parameter (Mandatory, ParameterSetName = "LiteralPathWithForce", ValueFromPipeline = $false, ValueFromPipelineByPropertyName = $true)]
            [parameter (Mandatory, ParameterSetName = "LiteralPathWithUpdate", ValueFromPipeline = $false, ValueFromPipelineByPropertyName = $true)]
            [ValidateNotNullOrEmpty()]
            [Alias("PSPath")]
            [string[]]
            $LiteralPath,

            [parameter (Mandatory,
                Position = 1,
                ValueFromPipeline = $false,
                ValueFromPipelineByPropertyName = $false)]
            [ValidateNotNullOrEmpty()]
            [string]
            $DestinationPath,

            [parameter (
                mandatory = $false,
                ValueFromPipeline = $false,
                ValueFromPipelineByPropertyName = $false)]
            [ValidateSet("Optimal", "NoCompression", "Fastest")]
            [string]
            $CompressionLevel = "Optimal",

            [parameter(Mandatory, ParameterSetName = "PathWithUpdate", ValueFromPipeline = $false, ValueFromPipelineByPropertyName = $false)]
            [parameter(Mandatory, ParameterSetName = "LiteralPathWithUpdate", ValueFromPipeline = $false, ValueFromPipelineByPropertyName = $false)]
            [switch]
            $Update = $false,

            [parameter(Mandatory, ParameterSetName = "PathWithForce", ValueFromPipeline = $false, ValueFromPipelineByPropertyName = $false)]
            [parameter(Mandatory, ParameterSetName = "LiteralPathWithForce", ValueFromPipeline = $false, ValueFromPipelineByPropertyName = $false)]
            [switch]
            $Force = $false
        )

        BEGIN {
            Add-Type -AssemblyName System.IO.Compression -ErrorAction Ignore
            Add-Type -AssemblyName System.IO.Compression.FileSystem -ErrorAction Ignore

            $zipFileExtension = ".zip"

            $LocalizedData = ConvertFrom-StringData @'
    PathNotFoundError=The path '{0}' either does not exist or is not a valid file system path.
    ExpandArchiveInValidDestinationPath=The path '{0}' is not a valid file system directory path.
    InvalidZipFileExtensionError={0} is not a supported archive file format. {1} is the only supported archive file format.
    ArchiveFileIsReadOnly=The attributes of the archive file {0} is set to 'ReadOnly' hence it cannot be updated. If you intend to update the existing archive file, remove the 'ReadOnly' attribute on the archive file else use -Force parameter to override and create a new archive file.
    ZipFileExistError=The archive file {0} already exists. Use the -Update parameter to update the existing archive file or use the -Force parameter to overwrite the existing archive file.
    DuplicatePathFoundError=The input to {0} parameter contains a duplicate path '{1}'. Provide a unique set of paths as input to {2} parameter.
    ArchiveFileIsEmpty=The archive file {0} is empty.
    CompressProgressBarText=The archive file '{0}' creation is in progress...
    ExpandProgressBarText=The archive file '{0}' expansion is in progress...
    AppendArchiveFileExtensionMessage=The archive file path '{0}' supplied to the DestinationPath patameter does not include .zip extension. Hence .zip is appended to the supplied DestinationPath path and the archive file would be created at '{1}'.
    AddItemtoArchiveFile=Adding '{0}'.
    CreateFileAtExpandedPath=Created '{0}'.
    InvalidArchiveFilePathError=The archive file path '{0}' specified as input to the {1} parameter is resolving to multiple file system paths. Provide a unique path to the {2} parameter where the archive file has to be created.
    InvalidExpandedDirPathError=The directory path '{0}' specified as input to the DestinationPath parameter is resolving to multiple file system paths. Provide a unique path to the Destination parameter where the archive file contents have to be expanded.
    FileExistsError=Failed to create file '{0}' while expanding the archive file '{1}' contents as the file '{2}' already exists. Use the -Force parameter if you want to overwrite the existing directory '{3}' contents when expanding the archive file.
    DeleteArchiveFile=The partially created archive file '{0}' is deleted as it is not usable.
    InvalidDestinationPath=The destination path '{0}' does not contain a valid archive file name.
    PreparingToCompressVerboseMessage=Preparing to compress...
    PreparingToExpandVerboseMessage=Preparing to expand...
'@

            #region Utility Functions
            function GetResolvedPathHelper {
                param
                (
                    [string[]]
                    $path,

                    [boolean]
                    $isLiteralPath,

                    [System.Management.Automation.PSCmdlet]
                    $callerPSCmdlet
                )

                $resolvedPaths = @()

                # null and empty check are are already done on Path parameter at the cmdlet layer.
                foreach ($currentPath in $path) {
                    try {
                        if ($isLiteralPath) {
                            $currentResolvedPaths = Resolve-Path -LiteralPath $currentPath -ErrorAction Stop
                        } else {
                            $currentResolvedPaths = Resolve-Path -Path $currentPath -ErrorAction Stop
                        }
                    } catch {
                        $errorMessage = ($LocalizedData.PathNotFoundError -f $currentPath)
                        $exception = New-Object System.InvalidOperationException $errorMessage, $_.Exception
                        $errorRecord = CreateErrorRecordHelper "ArchiveCmdletPathNotFound" $null ([System.Management.Automation.ErrorCategory]::InvalidArgument) $exception $currentPath
                        $callerPSCmdlet.ThrowTerminatingError($errorRecord)
                    }

                    foreach ($currentResolvedPath in $currentResolvedPaths) {
                        $resolvedPaths += $currentResolvedPath.ProviderPath
                    }
                }

                $resolvedPaths
            }

            function Add-CompressionAssemblies {

                if ($PSEdition -eq "Desktop") {
                    Add-Type -AssemblyName System.IO.Compression
                    Add-Type -AssemblyName System.IO.Compression.FileSystem
                }
            }

            function IsValidFileSystemPath {
                param
                (
                    [string[]]
                    $path
                )

                $result = $true;

                # null and empty check are are already done on Path parameter at the cmdlet layer.
                foreach ($currentPath in $path) {
                    if (!([System.IO.File]::Exists($currentPath) -or [System.IO.Directory]::Exists($currentPath))) {
                        $errorMessage = ($LocalizedData.PathNotFoundError -f $currentPath)
                        ThrowTerminatingErrorHelper "PathNotFound" $errorMessage ([System.Management.Automation.ErrorCategory]::InvalidArgument) $currentPath
                    }
                }

                return $result;
            }


            function ValidateDuplicateFileSystemPath {
                param
                (
                    [string]
                    $inputParameter,

                    [string[]]
                    $path
                )

                $uniqueInputPaths = @()

                # null and empty check are are already done on Path parameter at the cmdlet layer.
                foreach ($currentPath in $path) {
                    $currentInputPath = $currentPath.ToUpper()
                    if ($uniqueInputPaths.Contains($currentInputPath)) {
                        $errorMessage = ($LocalizedData.DuplicatePathFoundError -f $inputParameter, $currentPath, $inputParameter)
                        ThrowTerminatingErrorHelper "DuplicatePathFound" $errorMessage ([System.Management.Automation.ErrorCategory]::InvalidArgument) $currentPath
                    } else {
                        $uniqueInputPaths += $currentInputPath
                    }
                }
            }

            function CompressionLevelMapper {
                param
                (
                    [string]
                    $compressionLevel
                )

                $compressionLevelFormat = [System.IO.Compression.CompressionLevel]::Optimal

                # CompressionLevel format is already validated at the cmdlet layer.
                switch ($compressionLevel.ToString()) {
                    "Fastest" {
                        $compressionLevelFormat = [System.IO.Compression.CompressionLevel]::Fastest
                    }
                    "NoCompression" {
                        $compressionLevelFormat = [System.IO.Compression.CompressionLevel]::NoCompression
                    }
                }

                return $compressionLevelFormat
            }

            function CompressArchiveHelper {
                param
                (
                    [string[]]
                    $sourcePath,

                    [string]
                    $destinationPath,

                    [string]
                    $compressionLevel,

                    [bool]
                    $isUpdateMode
                )

                $numberOfItemsArchived = 0
                $sourceFilePaths = @()
                $sourceDirPaths = @()

                foreach ($currentPath in $sourcePath) {
                    $result = Test-Path -LiteralPath $currentPath -PathType Leaf
                    if ($result -eq $true) {
                        $sourceFilePaths += $currentPath
                    } else {
                        $sourceDirPaths += $currentPath
                    }
                }

                # The Soure Path contains one or more directory (this directory can have files under it) and no files to be compressed.
                if ($sourceFilePaths.Count -eq 0 -and $sourceDirPaths.Count -gt 0) {
                    $currentSegmentWeight = 100 / [double]$sourceDirPaths.Count
                    $previousSegmentWeight = 0
                    foreach ($currentSourceDirPath in $sourceDirPaths) {
                        $count = CompressSingleDirHelper $currentSourceDirPath $destinationPath $compressionLevel $true $isUpdateMode $previousSegmentWeight $currentSegmentWeight
                        $numberOfItemsArchived += $count
                        $previousSegmentWeight += $currentSegmentWeight
                    }
                }

                # The Soure Path contains only files to be compressed.
                elseIf ($sourceFilePaths.Count -gt 0 -and $sourceDirPaths.Count -eq 0) {
                    # $previousSegmentWeight is equal to 0 as there are no prior segments.
                    # $currentSegmentWeight is set to 100 as all files have equal weightage.
                    $previousSegmentWeight = 0
                    $currentSegmentWeight = 100

                    $numberOfItemsArchived = CompressFilesHelper $sourceFilePaths $destinationPath $compressionLevel $isUpdateMode $previousSegmentWeight $currentSegmentWeight
                }
                # The Soure Path contains one or more files and one or more directories (this directory can have files under it) to be compressed.
                elseif ($sourceFilePaths.Count -gt 0 -and $sourceDirPaths.Count -gt 0) {
                    # each directory is considered as an individual segments & all the individual files are clubed in to a separate sgemnet.
                    $currentSegmentWeight = 100 / [double]($sourceDirPaths.Count + 1)
                    $previousSegmentWeight = 0

                    foreach ($currentSourceDirPath in $sourceDirPaths) {
                        $count = CompressSingleDirHelper $currentSourceDirPath $destinationPath $compressionLevel $true $isUpdateMode $previousSegmentWeight $currentSegmentWeight
                        $numberOfItemsArchived += $count
                        $previousSegmentWeight += $currentSegmentWeight
                    }

                    $count = CompressFilesHelper $sourceFilePaths $destinationPath $compressionLevel $isUpdateMode $previousSegmentWeight $currentSegmentWeight
                    $numberOfItemsArchived += $count
                }

                return $numberOfItemsArchived
            }

            function CompressFilesHelper {
                param
                (
                    [string[]]
                    $sourceFilePaths,

                    [string]
                    $destinationPath,

                    [string]
                    $compressionLevel,

                    [bool]
                    $isUpdateMode,

                    [double]
                    $previousSegmentWeight,

                    [double]
                    $currentSegmentWeight
                )

                $numberOfItemsArchived = ZipArchiveHelper $sourceFilePaths $destinationPath $compressionLevel $isUpdateMode $null $previousSegmentWeight $currentSegmentWeight

                return $numberOfItemsArchived
            }

            function CompressSingleDirHelper {
                param
                (
                    [string]
                    $sourceDirPath,

                    [string]
                    $destinationPath,

                    [string]
                    $compressionLevel,

                    [bool]
                    $useParentDirAsRoot,

                    [bool]
                    $isUpdateMode,

                    [double]
                    $previousSegmentWeight,

                    [double]
                    $currentSegmentWeight
                )

                [System.Collections.Generic.List[System.String]]$subDirFiles = @()

                if ($useParentDirAsRoot) {
                    $sourceDirInfo = New-Object -TypeName System.IO.DirectoryInfo -ArgumentList $sourceDirPath
                    $sourceDirFullName = $sourceDirInfo.Parent.FullName

                    # If the directory is present at the drive level the DirectoryInfo.Parent include '\' example: C:\
                    # On the other hand if the directory exists at a deper level then DirectoryInfo.Parent
                    # has just the path (without an ending '\'). example C:\source
                    if ($sourceDirFullName.Length -eq 3) {
                        $modifiedSourceDirFullName = $sourceDirFullName
                    } else {
                        $modifiedSourceDirFullName = $sourceDirFullName + "\"
                    }
                } else {
                    $sourceDirFullName = $sourceDirPath
                    $modifiedSourceDirFullName = $sourceDirFullName + "\"
                }

                $dirContents = Get-ChildItem -LiteralPath $sourceDirPath -Recurse
                foreach ($currentContent in $dirContents) {
                    $isContainer = $currentContent -is [System.IO.DirectoryInfo]
                    if (!$isContainer) {
                        $subDirFiles.Add($currentContent.FullName)
                    } else {
                        # The currentContent points to a directory.
                        # We need to check if the directory is an empty directory, if so such a
                        # directory has to be explictly added to the archive file.
                        # if there are no files in the directory the GetFiles() API returns an empty array.
                        $files = $currentContent.GetFiles()
                        if ($files.Count -eq 0) {
                            $subDirFiles.Add($currentContent.FullName + "\")
                        }
                    }
                }

                $numberOfItemsArchived = ZipArchiveHelper $subDirFiles.ToArray() $destinationPath $compressionLevel $isUpdateMode $modifiedSourceDirFullName $previousSegmentWeight $currentSegmentWeight

                return $numberOfItemsArchived
            }

            function ZipArchiveHelper {
                param
                (
                    [System.Collections.Generic.List[System.String]]
                    $sourcePaths,

                    [string]
                    $destinationPath,

                    [string]
                    $compressionLevel,

                    [bool]
                    $isUpdateMode,

                    [string]
                    $modifiedSourceDirFullName,

                    [double]
                    $previousSegmentWeight,

                    [double]
                    $currentSegmentWeight
                )

                $numberOfItemsArchived = 0
                $fileMode = [System.IO.FileMode]::Create
                $result = Test-Path -LiteralPath $DestinationPath -PathType Leaf
                if ($result -eq $true) {
                    $fileMode = [System.IO.FileMode]::Open
                }

                Add-CompressionAssemblies

                try {
                    # At this point we are sure that the archive file has write access.
                    $archiveFileStreamArgs = @($destinationPath, $fileMode)
                    $archiveFileStream = New-Object -TypeName System.IO.FileStream -ArgumentList $archiveFileStreamArgs

                    $zipArchiveArgs = @($archiveFileStream, [System.IO.Compression.ZipArchiveMode]::Update, $false)
                    $zipArchive = New-Object -TypeName System.IO.Compression.ZipArchive -ArgumentList $zipArchiveArgs

                    $currentEntryCount = 0
                    $progressBarStatus = ($LocalizedData.CompressProgressBarText -f $destinationPath)
                    $bufferSize = 4kb
                    $buffer = New-Object Byte[] $bufferSize

                    foreach ($currentFilePath in $sourcePaths) {
                        if ($modifiedSourceDirFullName -ne $null -and $modifiedSourceDirFullName.Length -gt 0) {
                            $index = $currentFilePath.IndexOf($modifiedSourceDirFullName, [System.StringComparison]::OrdinalIgnoreCase)
                            $currentFilePathSubString = $currentFilePath.Substring($index, $modifiedSourceDirFullName.Length)
                            $relativeFilePath = $currentFilePath.Replace($currentFilePathSubString, "").Trim()
                        } else {
                            $relativeFilePath = [System.IO.Path]::GetFileName($currentFilePath)
                        }

                        # Update mode is selected.
                        # Check to see if archive file already contains one or more zip files in it.
                        if ($isUpdateMode -eq $true -and $zipArchive.Entries.Count -gt 0) {
                            $entryToBeUpdated = $null

                            # Check if the file already exists in the archive file.
                            # If so replace it with new file from the input source.
                            # If the file does not exist in the archive file then default to
                            # create mode and create the entry in the archive file.

                            foreach ($currentArchiveEntry in $zipArchive.Entries) {
                                if ($currentArchiveEntry.FullName -eq $relativeFilePath) {
                                    $entryToBeUpdated = $currentArchiveEntry
                                    break
                                }
                            }

                            if ($entryToBeUpdated -ne $null) {
                                $addItemtoArchiveFileMessage = ($LocalizedData.AddItemtoArchiveFile -f $currentFilePath)
                                $entryToBeUpdated.Delete()
                            }
                        }

                        $compression = CompressionLevelMapper $compressionLevel

                        # If a directory needs to be added to an archive file,
                        # by convention the .Net API's expect the path of the diretcory
                        # to end with '\' to detect the path as an directory.
                        if (!$relativeFilePath.EndsWith("\", [StringComparison]::OrdinalIgnoreCase)) {
                            try {
                                try {
                                    $currentFileStream = [System.IO.File]::Open($currentFilePath, [System.IO.FileMode]::Open, [System.IO.FileAccess]::Read)
                                } catch {
                                    # Failed to access the file. Write a non terminating error to the pipeline
                                    # and move on with the remaining files.
                                    $exception = $_.Exception
                                    if ($null -ne $_.Exception -and
                                        $null -ne $_.Exception.InnerException) {
                                        $exception = $_.Exception.InnerException
                                    }
                                    $errorRecord = CreateErrorRecordHelper "CompressArchiveUnauthorizedAccessError" $null ([System.Management.Automation.ErrorCategory]::PermissionDenied) $exception $currentFilePath
                                    Write-Error -ErrorRecord $errorRecord
                                }

                                if ($null -ne $currentFileStream) {
                                    $srcStream = New-Object System.IO.BinaryReader $currentFileStream

                                    $currentArchiveEntry = $zipArchive.CreateEntry($relativeFilePath, $compression)

                                    # Updating  the File Creation time so that the same timestamp would be retained after expanding the compressed file.
                                    # At this point we are sure that Get-ChildItem would succeed.
                                    $currentArchiveEntry.LastWriteTime = (Get-Item -LiteralPath $currentFilePath).LastWriteTime

                                    $destStream = New-Object System.IO.BinaryWriter $currentArchiveEntry.Open()

                                    while ($numberOfBytesRead = $srcStream.Read($buffer, 0, $bufferSize)) {
                                        $destStream.Write($buffer, 0, $numberOfBytesRead)
                                        $destStream.Flush()
                                    }

                                    $numberOfItemsArchived += 1
                                    $addItemtoArchiveFileMessage = ($LocalizedData.AddItemtoArchiveFile -f $currentFilePath)
                                }
                            } finally {
                                If ($null -ne $currentFileStream) {
                                    $currentFileStream.Dispose()
                                }
                                If ($null -ne $srcStream) {
                                    $srcStream.Dispose()
                                }
                                If ($null -ne $destStream) {
                                    $destStream.Dispose()
                                }
                            }
                        } else {
                            $currentArchiveEntry = $zipArchive.CreateEntry("$relativeFilePath", $compression)
                            $numberOfItemsArchived += 1
                            $addItemtoArchiveFileMessage = ($LocalizedData.AddItemtoArchiveFile -f $currentFilePath)
                        }

                        if ($null -ne $addItemtoArchiveFileMessage) {
                            Write-Verbose $addItemtoArchiveFileMessage
                        }

                        $currentEntryCount += 1
                        ProgressBarHelper "Compress-Archive" $progressBarStatus $previousSegmentWeight $currentSegmentWeight $sourcePaths.Count  $currentEntryCount
                    }
                } finally {
                    If ($null -ne $zipArchive) {
                        $zipArchive.Dispose()
                    }

                    If ($null -ne $archiveFileStream) {
                        $archiveFileStream.Dispose()
                    }

                    # Complete writing progress.
                    Write-Progress -Activity "Compress-Archive" -Completed
                }

                return $numberOfItemsArchived
            }

            <############################################################################################
# ValidateArchivePathHelper: This is a helper function used to validate the archive file
# path & its file format. The only supported archive file format is .zip
############################################################################################>
            function ValidateArchivePathHelper {
                param
                (
                    [string]
                    $archiveFile
                )

                if ([System.IO.File]::Exists($archiveFile)) {
                    $extension = [system.IO.Path]::GetExtension($archiveFile)

                    # Invalid file extension is specifed for the zip file.
                    if ($extension -ne $zipFileExtension) {
                        $errorMessage = ($LocalizedData.InvalidZipFileExtensionError -f $extension, $zipFileExtension)
                        ThrowTerminatingErrorHelper "NotSupportedArchiveFileExtension" $errorMessage ([System.Management.Automation.ErrorCategory]::InvalidArgument) $extension
                    }
                } else {
                    $errorMessage = ($LocalizedData.PathNotFoundError -f $archiveFile)
                    ThrowTerminatingErrorHelper "PathNotFound" $errorMessage ([System.Management.Automation.ErrorCategory]::InvalidArgument) $archiveFile
                }
            }

            <############################################################################################
# ExpandArchiveHelper: This is a helper function used to expand the archive file contents
# to the specified directory.
############################################################################################>
            function ExpandArchiveHelper {
                param
                (
                    [string]
                    $archiveFile,

                    [string]
                    $expandedDir,

                    [ref]
                    $expandedItems,

                    [boolean]
                    $force,

                    [boolean]
                    $isVerbose,

                    [boolean]
                    $isConfirm
                )

                Add-CompressionAssemblies

                try {
                    # The existance of archive file has already been validated by ValidateArchivePathHelper
                    # before calling this helper function.
                    $archiveFileStreamArgs = @($archiveFile, [System.IO.FileMode]::Open, [System.IO.FileAccess]::Read)
                    $archiveFileStream = New-Object -TypeName System.IO.FileStream -ArgumentList $archiveFileStreamArgs

                    $zipArchiveArgs = @($archiveFileStream, [System.IO.Compression.ZipArchiveMode]::Read, $false)
                    $zipArchive = New-Object -TypeName System.IO.Compression.ZipArchive -ArgumentList $zipArchiveArgs

                    if ($zipArchive.Entries.Count -eq 0) {
                        $archiveFileIsEmpty = ($LocalizedData.ArchiveFileIsEmpty -f $archiveFile)
                        Write-Verbose $archiveFileIsEmpty
                        return
                    }

                    $currentEntryCount = 0
                    $progressBarStatus = ($LocalizedData.ExpandProgressBarText -f $archiveFile)

                    # The archive entries can either be empty directories or files.
                    foreach ($currentArchiveEntry in $zipArchive.Entries) {
                        $currentArchiveEntryPath = Join-Path -Path $expandedDir -ChildPath $currentArchiveEntry.FullName
                        $extension = [system.IO.Path]::GetExtension($currentArchiveEntryPath)

                        # The current archive entry is an empty directory
                        # The FullName of the Archive Entry representing a directory would end with a trailing '\'.
                        if ($extension -eq [string]::Empty -and
                            $currentArchiveEntryPath.EndsWith("\", [StringComparison]::OrdinalIgnoreCase)) {
                            $pathExists = Test-Path -LiteralPath $currentArchiveEntryPath

                            # The current archive entry expects an empty directory.
                            # Check if the existing directory is empty. If its not empty
                            # then it means that user has added this directory by other means.
                            if ($pathExists -eq $false) {
                                New-Item $currentArchiveEntryPath -ItemType Directory -Confirm:$isConfirm | Out-Null

                                if (Test-Path -LiteralPath $currentArchiveEntryPath -PathType Container) {
                                    $addEmptyDirectorytoExpandedPathMessage = ($LocalizedData.AddItemtoArchiveFile -f $currentArchiveEntryPath)
                                    Write-Verbose $addEmptyDirectorytoExpandedPathMessage

                                    $expandedItems.Value += $currentArchiveEntryPath
                                }
                            }
                        } else {
                            try {
                                $currentArchiveEntryFileInfo = New-Object -TypeName System.IO.FileInfo -ArgumentList $currentArchiveEntryPath
                                $parentDirExists = Test-Path -LiteralPath $currentArchiveEntryFileInfo.DirectoryName -PathType Container

                                # If the Parent directory of the current entry in the archive file does not exist, then create it.
                                if ($parentDirExists -eq $false) {
                                    New-Item $currentArchiveEntryFileInfo.DirectoryName -ItemType Directory -Confirm:$isConfirm | Out-Null

                                    if (!(Test-Path -LiteralPath $currentArchiveEntryFileInfo.DirectoryName -PathType Container)) {
                                        # The directory referred by $currentArchiveEntryFileInfo.DirectoryName was not successfully created.
                                        # This could be because the user has specified -Confirm paramter when Expand-Archive was invoked
                                        # and authorization was not provided when confirmation was prompted. In such a scenario,
                                        # we skip the current file in the archive and continue with the remaining archive file contents.
                                        Continue
                                    }

                                    $expandedItems.Value += $currentArchiveEntryFileInfo.DirectoryName
                                }

                                $hasNonTerminatingError = $false

                                # Check if the file in to which the current archive entry contents
                                # would be expanded already exists.
                                if ($currentArchiveEntryFileInfo.Exists) {
                                    if ($force) {
                                        Remove-Item -LiteralPath $currentArchiveEntryFileInfo.FullName -Force -ErrorVariable ev -Verbose:$isVerbose -Confirm:$isConfirm
                                        if ($ev -ne $null) {
                                            $hasNonTerminatingError = $true
                                        }

                                        if (Test-Path -LiteralPath $currentArchiveEntryFileInfo.FullName -PathType Leaf) {
                                            # The file referred by $currentArchiveEntryFileInfo.FullName was not successfully removed.
                                            # This could be because the user has specified -Confirm paramter when Expand-Archive was invoked
                                            # and authorization was not provided when confirmation was prompted. In such a scenario,
                                            # we skip the current file in the archive and continue with the remaining archive file contents.
                                            Continue
                                        }
                                    } else {
                                        # Write non-terminating error to the pipeline.
                                        $errorMessage = ($LocalizedData.FileExistsError -f $currentArchiveEntryFileInfo.FullName, $archiveFile, $currentArchiveEntryFileInfo.FullName, $currentArchiveEntryFileInfo.FullName)
                                        $errorRecord = CreateErrorRecordHelper "ExpandArchiveFileExists" $errorMessage ([System.Management.Automation.ErrorCategory]::InvalidOperation) $null $currentArchiveEntryFileInfo.FullName
                                        Write-Error -ErrorRecord $errorRecord
                                        $hasNonTerminatingError = $true
                                    }
                                }

                                if (!$hasNonTerminatingError) {
                                    [System.IO.Compression.ZipFileExtensions]::ExtractToFile($currentArchiveEntry, $currentArchiveEntryPath, $false)

                                    # Add the expanded file path to the $expandedItems array,
                                    # to keep track of all the expanded files created while expanding the archive file.
                                    # If user enters CTRL + C then at that point of time, all these expanded files
                                    # would be deleted as part of the clean up process.
                                    $expandedItems.Value += $currentArchiveEntryPath

                                    $addFiletoExpandedPathMessage = ($LocalizedData.CreateFileAtExpandedPath -f $currentArchiveEntryPath)
                                    Write-Verbose $addFiletoExpandedPathMessage
                                }
                            } finally {
                                If ($null -ne $destStream) {
                                    $destStream.Dispose()
                                }

                                If ($null -ne $srcStream) {
                                    $srcStream.Dispose()
                                }
                            }
                        }

                        $currentEntryCount += 1
                        # $currentSegmentWeight is Set to 100 giving equal weightage to each file that is getting expanded.
                        # $previousSegmentWeight is set to 0 as there are no prior segments.
                        $previousSegmentWeight = 0
                        $currentSegmentWeight = 100
                        ProgressBarHelper "Expand-Archive" $progressBarStatus $previousSegmentWeight $currentSegmentWeight $zipArchive.Entries.Count  $currentEntryCount
                    }
                } finally {
                    If ($null -ne $zipArchive) {
                        $zipArchive.Dispose()
                    }

                    If ($null -ne $archiveFileStream) {
                        $archiveFileStream.Dispose()
                    }

                    # Complete writing progress.
                    Write-Progress -Activity "Expand-Archive" -Completed
                }
            }

            <############################################################################################
# ProgressBarHelper: This is a helper function used to display progress message.
# This function is used by both Compress-Archive & Expand-Archive to display archive file
# creation/expansion progress.
############################################################################################>
            function ProgressBarHelper {
                param
                (
                    [string]
                    $cmdletName,

                    [string]
                    $status,

                    [double]
                    $previousSegmentWeight,

                    [double]
                    $currentSegmentWeight,

                    [int]
                    $totalNumberofEntries,

                    [int]
                    $currentEntryCount
                )

                if ($currentEntryCount -gt 0 -and
                    $totalNumberofEntries -gt 0 -and
                    $previousSegmentWeight -ge 0 -and
                    $currentSegmentWeight -gt 0) {
                    $entryDefaultWeight = $currentSegmentWeight / [double]$totalNumberofEntries

                    $percentComplete = $previousSegmentWeight + ($entryDefaultWeight * $currentEntryCount)
                    Write-Progress -Activity $cmdletName -Status $status -PercentComplete $percentComplete
                }
            }

            <############################################################################################
# CSVHelper: This is a helper function used to append comma after each path specifid by
# the SourcePath array. This helper function is used to display all the user supplied paths
# in the WhatIf message.
############################################################################################>
            function CSVHelper {
                param
                (
                    [string[]]
                    $sourcePath
                )

                # SourcePath has already been validated by the calling funcation.
                if ($sourcePath.Count -gt 1) {
                    $sourcePathInCsvFormat = "`n"
                    for ($currentIndex = 0; $currentIndex -lt $sourcePath.Count; $currentIndex++) {
                        if ($currentIndex -eq $sourcePath.Count - 1) {
                            $sourcePathInCsvFormat += $sourcePath[$currentIndex]
                        } else {
                            $sourcePathInCsvFormat += $sourcePath[$currentIndex] + "`n"
                        }
                    }
                } else {
                    $sourcePathInCsvFormat = $sourcePath
                }

                return $sourcePathInCsvFormat
            }

            <############################################################################################
# ThrowTerminatingErrorHelper: This is a helper function used to throw terminating error.
############################################################################################>
            function ThrowTerminatingErrorHelper {
                param
                (
                    [string]
                    $errorId,

                    [string]
                    $errorMessage,

                    [System.Management.Automation.ErrorCategory]
                    $errorCategory,

                    [object]
                    $targetObject,

                    [Exception]
                    $innerException
                )

                if ($innerException -eq $null) {
                    $exception = New-object System.IO.IOException $errorMessage
                } else {
                    $exception = New-Object System.IO.IOException $errorMessage, $innerException
                }

                $exception = New-Object System.IO.IOException $errorMessage
                $errorRecord = New-Object System.Management.Automation.ErrorRecord $exception, $errorId, $errorCategory, $targetObject
                $PSCmdlet.ThrowTerminatingError($errorRecord)
            }

            <############################################################################################
# CreateErrorRecordHelper: This is a helper function used to create an ErrorRecord
############################################################################################>
            function CreateErrorRecordHelper {
                param
                (
                    [string]
                    $errorId,

                    [string]
                    $errorMessage,

                    [System.Management.Automation.ErrorCategory]
                    $errorCategory,

                    [Exception]
                    $exception,

                    [object]
                    $targetObject
                )

                if ($null -eq $exception) {
                    $exception = New-Object System.IO.IOException $errorMessage
                }

                $errorRecord = New-Object System.Management.Automation.ErrorRecord $exception, $errorId, $errorCategory, $targetObject
                return $errorRecord
            }
            #endregion Utility Functions

            $inputPaths = @()
            $destinationParentDir = [system.IO.Path]::GetDirectoryName($DestinationPath)
            if ($null -eq $destinationParentDir) {
                $errorMessage = ($LocalizedData.InvalidDestinationPath -f $DestinationPath)
                ThrowTerminatingErrorHelper "InvalidArchiveFilePath" $errorMessage ([System.Management.Automation.ErrorCategory]::InvalidArgument) $DestinationPath
            }

            if ($destinationParentDir -eq [string]::Empty) {
                $destinationParentDir = '.'
            }

            $achiveFileName = [system.IO.Path]::GetFileName($DestinationPath)
            $destinationParentDir = GetResolvedPathHelper $destinationParentDir $false $PSCmdlet

            if ($destinationParentDir.Count -gt 1) {
                $errorMessage = ($LocalizedData.InvalidArchiveFilePathError -f $DestinationPath, "DestinationPath", "DestinationPath")
                ThrowTerminatingErrorHelper "InvalidArchiveFilePath" $errorMessage ([System.Management.Automation.ErrorCategory]::InvalidArgument) $DestinationPath
            }

            IsValidFileSystemPath $destinationParentDir | Out-Null
            $DestinationPath = Join-Path -Path $destinationParentDir -ChildPath $achiveFileName

            # GetExtension API does not validate for the actual existance of the path.
            $extension = [system.IO.Path]::GetExtension($DestinationPath)

            # If user does not specify .Zip extension, we append it.
            If ($extension -eq [string]::Empty) {
                $DestinationPathWithOutExtension = $DestinationPath
                $DestinationPath = $DestinationPathWithOutExtension + $zipFileExtension
                $appendArchiveFileExtensionMessage = ($LocalizedData.AppendArchiveFileExtensionMessage -f $DestinationPathWithOutExtension, $DestinationPath)
                Write-Verbose $appendArchiveFileExtensionMessage
            } else {
                # Invalid file extension is specified for the zip file to be created.
                if ($extension -ne $zipFileExtension) {
                    $errorMessage = ($LocalizedData.InvalidZipFileExtensionError -f $extension, $zipFileExtension)
                    ThrowTerminatingErrorHelper "NotSupportedArchiveFileExtension" $errorMessage ([System.Management.Automation.ErrorCategory]::InvalidArgument) $extension
                }
            }

            $archiveFileExist = Test-Path -LiteralPath $DestinationPath -PathType Leaf

            if ($archiveFileExist -and ($Update -eq $false -and $Force -eq $false)) {
                $errorMessage = ($LocalizedData.ZipFileExistError -f $DestinationPath)
                ThrowTerminatingErrorHelper "ArchiveFileExists" $errorMessage ([System.Management.Automation.ErrorCategory]::InvalidArgument) $DestinationPath
            }

            # If archive file already exists and if -Update is specified, then we check to see
            # if we have write access permission to update the existing archive file.
            if ($archiveFileExist -and $Update -eq $true) {
                $item = Get-Item -Path $DestinationPath
                if ($item.Attributes.ToString().Contains("ReadOnly")) {
                    $errorMessage = ($LocalizedData.ArchiveFileIsReadOnly -f $DestinationPath)
                    ThrowTerminatingErrorHelper "ArchiveFileIsReadOnly" $errorMessage ([System.Management.Automation.ErrorCategory]::InvalidOperation) $DestinationPath
                }
            }

            $isWhatIf = $psboundparameters.ContainsKey("WhatIf")
            if (!$isWhatIf) {
                $preparingToCompressVerboseMessage = ($LocalizedData.PreparingToCompressVerboseMessage)
                Write-Verbose $preparingToCompressVerboseMessage

                $progressBarStatus = ($LocalizedData.CompressProgressBarText -f $DestinationPath)
                ProgressBarHelper "Compress-Archive" $progressBarStatus 0 100 100 1
            }
        }
        PROCESS {
            if ($PsCmdlet.ParameterSetName -eq "Path" -or
                $PsCmdlet.ParameterSetName -eq "PathWithForce" -or
                $PsCmdlet.ParameterSetName -eq "PathWithUpdate") {
                $inputPaths += $Path
            }

            if ($PsCmdlet.ParameterSetName -eq "LiteralPath" -or
                $PsCmdlet.ParameterSetName -eq "LiteralPathWithForce" -or
                $PsCmdlet.ParameterSetName -eq "LiteralPathWithUpdate") {
                $inputPaths += $LiteralPath
            }
        }
        END {
            # If archive file already exists and if -Force is specified, we delete the
            # existing artchive file and create a brand new one.
            if (($PsCmdlet.ParameterSetName -eq "PathWithForce" -or
                    $PsCmdlet.ParameterSetName -eq "LiteralPathWithForce") -and $archiveFileExist) {
                Remove-Item -Path $DestinationPath -Force -ErrorAction Stop
            }

            # Validate Source Path depeding on parameter set being used.
            # The specified source path conatins one or more files or directories that needs
            # to be compressed.
            $isLiteralPathUsed = $false
            if ($PsCmdlet.ParameterSetName -eq "LiteralPath" -or
                $PsCmdlet.ParameterSetName -eq "LiteralPathWithForce" -or
                $PsCmdlet.ParameterSetName -eq "LiteralPathWithUpdate") {
                $isLiteralPathUsed = $true
            }

            ValidateDuplicateFileSystemPath $PsCmdlet.ParameterSetName $inputPaths
            $resolvedPaths = GetResolvedPathHelper $inputPaths $isLiteralPathUsed $PSCmdlet
            IsValidFileSystemPath $resolvedPaths | Out-Null

            $sourcePath = $resolvedPaths;

            # CSVHelper: This is a helper function used to append comma after each path specifid by
            # the $sourcePath array. The comma saperated paths are displayed in the -WhatIf message.
            $sourcePathInCsvFormat = CSVHelper $sourcePath
            if ($pscmdlet.ShouldProcess($sourcePathInCsvFormat)) {
                try {
                    # StopProcessing is not avaliable in Script cmdlets. However the pipleline execution
                    # is terminated when ever 'CTRL + C' is entered by user to terminate the cmdlet execution.
                    # The finally block is executed whenever pipleline is terminated.
                    # $isArchiveFileProcessingComplete variable is used to track if 'CTRL + C' is entered by the
                    # user.
                    $isArchiveFileProcessingComplete = $false

                    $numberOfItemsArchived = CompressArchiveHelper $sourcePath $DestinationPath $CompressionLevel $Update

                    $isArchiveFileProcessingComplete = $true
                } finally {
                    # The $isArchiveFileProcessingComplete would be set to $false if user has typed 'CTRL + C' to
                    # terminate the cmdlet execution or if an unhandled exception is thrown.
                    # $numberOfItemsArchived contains the count of number of files or directories add to the archive file.
                    # If the newly created archive file is empty then we delete it as its not usable.
                    if (($isArchiveFileProcessingComplete -eq $false) -or
                        ($numberOfItemsArchived -eq 0)) {
                        $DeleteArchiveFileMessage = ($LocalizedData.DeleteArchiveFile -f $DestinationPath)
                        Write-Verbose $DeleteArchiveFileMessage

                        # delete the partial archive file created.
                        if (Test-Path $DestinationPath) {
                            Remove-Item -LiteralPath $DestinationPath -Force -Recurse -ErrorAction SilentlyContinue
                        }
                    }
                }
            }
        }
    }
}

tools\dbatools\internal\functions\tabcompletion\Register-DbaTeppArgumentCompleter.ps1

function Register-DbaTeppArgumentCompleter {
    <#
        .SYNOPSIS
            Registers a parameter for a prestored Tepp.

        .DESCRIPTION
            Registers a parameter for a prestored Tepp.
            This function allows easily registering a function's parameter for Tepp in the function-file, rather than in a centralized location.

        .PARAMETER Command
            Name of the command whose parameter should receive Tepp.
            Supports multiple commands at the same time in order to optimize performance.

        .PARAMETER Parameter
            Name of the parameter that should be Tepp'ed.

        .PARAMETER Name
            Name of the Tepp Completioner to use.
            Defaults to the parameter name.
            Best practice requires a Completioner to be named the same as the completed parameter, in which case this parameter needs not be specified.
            However sometimes that may not be universally possible, which is when this parameter comes in.

        .PARAMETER All
            Whether this TEPP applies to all commands in dbatools that have the specified parameter.

        .EXAMPLE
            Register-DbaTeppArgumentCompleter -Command Get-DbaBackupHistory -Parameter Database

            Registers the "Database" parameter of the Get-DbaBackupHistory to receive Database-Tepp
       #>
    [CmdletBinding()]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSAvoidUsingEmptyCatchBlock", "")]
    param (
        [string[]]$Command,
        [string[]]$Parameter,
        [string]$Name,
        [switch]$All
    )

    #region ScriptBlock
    $scriptBlock = {
        param (
            $commandName,
            $parameterName,
            $wordToComplete,
            $commandAst,
            $fakeBoundParameter
        )

        if ($teppScript = [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::GetTeppScript($commandName, $parameterName)) {
            $start = Get-Date
            $teppScript.LastExecution = $start
            $teppScript.LastDuration = New-Object System.TimeSpan(-1) # Null it, just in case. It's a new start.

            try { $ExecutionContext.InvokeCommand.InvokeScript($true, ([System.Management.Automation.ScriptBlock]::Create($teppScript.ScriptBlock.ToString())), $null, @($commandName, $parameterName, $wordToComplete, $commandAst, $fakeBoundParameter)) }
            catch { }

            $teppScript.LastDuration = (Get-Date) - $start
        }
    }
    #endregion ScriptBlock

    foreach ($p in $Parameter) {
        $lowername = $PSBoundParameters.Name

        if ($null -eq $lowername) {
            $lowername = $p.ToLower()
        } else {
            $lowername = $lowername.ToLower()
        }

        if ($All) { [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::AddTabCompletionSet("*", $p, $lowername) }
        else {
            foreach ($c in $Command) {
                [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::AddTabCompletionSet($c, $p, $lowername)
            }
        }

        if ($script:TEPP) {
            TabExpansionPlusPlus\Register-ArgumentCompleter -CommandName $Command -ParameterName $p -ScriptBlock $scriptBlock
        } else {
            Register-ArgumentCompleter -CommandName $Command -ParameterName $p -ScriptBlock $scriptBlock
        }
    }
}

tools\dbatools\internal\functions\tabcompletion\Register-DbaTeppInstanceCacheBuilder.ps1

function Register-DbaTeppInstanceCacheBuilder {
    <#
        .SYNOPSIS
            Registers a scriptblock used to build the TEPP cache from an instance connection.

        .DESCRIPTION
            Registers a scriptblock used to build the TEPP cache from an instance connection.
            Used only on import of the module.

        .PARAMETER ScriptBlock
            The ScriptBlock used to build the cache.

            The ScriptBlock may assume the following two variables to exist:
            - $FullSmoName (A string containing the full SMO name as presented by the DbaInstanceParameter class-interpreted input)
            - $server (An SMO connection object)

        .PARAMETER Slow
            This switch implies a gathering process that takes too much time to be performed synchronously.
            Basically, when retrieving the information takes more than 25ms on an average server (on top of establishing the original connection), this switch should be set.

        .EXAMPLE
            Register-DbaTeppInstanceCacheBuilder -ScriptBlock $ScriptBlock

            Registers the scriptblock stored in the aptly named variable $ScriptBlock as a fest cache building scriptblock.
            Note: The scriptblock must execute swiftly! (less than 25ms)

        .EXAMPLE
            Register-DbaTeppInstanceCacheBuilder -ScriptBlock $ScriptBlock -Slow

            Registers the scriptblock stored in the aptly named variable $ScriptBlock as a slow cache building scriptblock.
            This is suitable for cache building scriptblocks that take a while to execute.

        .NOTES
            Additional information about the function.
       #>
    [CmdletBinding()]
    param (
        [Parameter(Mandatory)]
        [System.Management.Automation.ScriptBlock]
        $ScriptBlock,

        [switch]
        $Slow
    )

    if ($Slow -and ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::TeppGatherScriptsSlow -notcontains $ScriptBlock)) {
        [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::TeppGatherScriptsSlow.Add($ScriptBlock)
    } elseif ([Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::TeppGatherScriptsFast -notcontains $ScriptBlock) {
        [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::TeppGatherScriptsFast.Add($ScriptBlock)
    }
}

tools\dbatools\internal\functions\tabcompletion\Register-DbaTeppScriptBlock.ps1

function Register-DbaTeppScriptblock {
    <#
        .SYNOPSIS
            Registers a scriptblock under name, to later be available for TabExpansion.

        .DESCRIPTION
            Registers a scriptblock under name, to later be available for TabExpansion.

        .PARAMETER ScriptBlock
            The scriptblock to register.

        .PARAMETER Name
            The name under which the scriptblock should be registered.

        .EXAMPLE
            Register-DbaTeppScriptblock -ScriptBlock $scriptBlock -Name MyFirstTeppScriptBlock

            Stores the scriptblock stored in $scriptBlock under the name "MyFirstTeppScriptBlock"
       #>
    [CmdletBinding()]
    param (
        [System.Management.Automation.ScriptBlock]
        $ScriptBlock,

        [string]
        $Name
    )

    $scp = New-Object Sqlcollaborative.Dbatools.TabExpansion.ScriptContainer
    $scp.Name = $Name.ToLower()
    $scp.ScriptBlock = $ScriptBlock
    $scp.LastDuration = New-TimeSpan -Seconds -1

    [Sqlcollaborative.Dbatools.TabExpansion.TabExpansionHost]::Scripts[$Name.ToLower()] = $scp
}

tools\dbatools\internal\functions\Test-ComputerTarget.ps1

function Test-ComputerTarget {
    <#
    .SYNOPSIS
        Validates whether the input string can be legally used to target a computer.

    .DESCRIPTION
        Validates whether the input string can be legally used to target a computer.
        It will consider:
        - Names (NETBIOS/dns)
        - IPv4 Addresses
        - IPv6 Addresses
        It will resolve idn names into default ascii names according to the official rules, before rendering judgement.

    .PARAMETER ComputerName
        The name to verify

    .EXAMPLE
        PS C:\> Test-ComputerTarget -ComputerName 'server1'

        Will test whether 'server1' is a legal computername (hint: it is)

    .EXAMPLE
        PS C:\> "foo", "bar", "foo bar" | Test-ComputerTarget

        Will test, whether the names passed to it are legal targets.
        - The first two will pass, the last one will fail
        - Note that it will only return boolean values, so the order needs to be remembered (due to this, using it by pipeline on more than one object is not really recommended).
    #>
    [CmdletBinding()]
    param (
        [Parameter(ValueFromPipeline, Mandatory)]
        [string[]]
        $ComputerName
    )

    process {
        foreach ($Computer in $ComputerName) {
            [Sqlcollaborative.Dbatools.Utility.Validation]::IsValidComputerTarget($ComputerName)
        }
    }
}

tools\dbatools\internal\functions\Test-DbaLsnChain.ps1

function Test-DbaLsnChain {
    <#
    .SYNOPSIS
        Checks that a filtered array from Get-FilteredRestore contains a restorabel chain of LSNs

    .DESCRIPTION
        Finds the anchoring Full backup (or multiple if it's a striped set).
        Then filters to ensure that all the backups are from that anchor point (LastLSN) and that they're all on the same RecoveryForkID
        Then checks that we have either enough Diffs and T-log backups to get to where we want to go. And checks that there is no break between
        LastLSN and FirstLSN in sequential files

    .PARAMETER FilteredRestoreFiles
        This is just an object consisting of the output from Read-DbaBackupHeader. Normally this will have been filtered down to a restorable chain
        before arriving here. (ie; only 1 anchoring Full backup)

    .NOTES
        Author: Stuart Moore (@napalmgram), stuart-moore.com
        Tags:
        dbatools PowerShell module (https://dbatools.io, [email protected])
       Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        Test-DbaLsnChain -FilteredRestoreFiles $FilteredFiles

        Checks that the Restore chain in $FilteredFiles is complete and can be fully restored

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory, ValueFromPipeline)]
        [object[]]$FilteredRestoreFiles,
        [switch]$Continue,
        [switch]$EnableException
    )


    begin {
        #Need to anchor  with full backup:
        $TestHistory = @()
    }
    process {
        foreach ($bh in $FilteredRestoreFiles) {
            $TestHistory += $bh
        }
    }
    end {
        if ($continue) {
            return $true
        }
        Write-Message -Level Verbose -Message "Testing LSN Chain"
        if ($null -eq $TestHistory[0].BackupTypeDescription) {
            $TypeName = 'Type'
        } else {
            $TypeName = "BackupTypeDescription"
        }
        Write-Message -Level VeryVerbose -Message "Testing LSN Chain - Type $typename"
        $FullDBAnchor = $TestHistory | Where-Object {$_.$TypeName -in ('Database', 'Full') }

        if (($FullDBAnchor | Group-Object -Property FirstLSN | Measure-Object).Count -ne 1) {
            $cnt = ($FullDBAnchor | Group-Object -Property FirstLSN | Measure-Object).Count
            foreach ($tFile in $FullDBAnchor) {
                Write-Message -Level Debug -Message "$($tfile.FirstLsn) - $($tfile.TypeName)"
            }
            Write-Message -Level Verbose -Message "db count = $cnt"
            Write-Message -Level Warning -Message "More than 1 full backup from a different LSN, or less than 1, neither supported"

            return $false
            break;
        }

        #Via LSN chain:
        [BigInt]$CheckPointLSN = ($FullDBAnchor | Select-Object -First 1).CheckPointLSN.ToString()
        [BigInt]$FullDBLastLSN = ($FullDBAnchor | Select-Object -First 1).LastLSN.ToString()
        $BackupWrongLSN = $FilteredRestoreFiles | Where-Object {$_.DatabaseBackupLSN -ne $CheckPointLSN}
        #Should be 0 in there, if not, lets check that they're from during the full backup
        if ($BackupWrongLSN.count -gt 0 ) {
            if (($BackupWrongLSN | Where-Object {[BigInt]$_.LastLSN.ToString() -lt $FullDBLastLSN}).count -gt 0) {
                Write-Message -Level Warning -Message "We have non matching LSNs - not supported"
                return $false
                break;
            }
        }
        $DiffAnchor = $TestHistory | Where-Object {$_.$TypeName -in ('Database Differential', 'Differential')}
        #Check for no more than a single Differential backup
        if (($DiffAnchor.FirstLSN | Select-Object -unique | Measure-Object).count -gt 1) {
            Write-Message -Level Warning -Message "More than 1 differential backup, not supported"
            return $false
            break;
        } elseif (($DiffAnchor | Measure-Object).Count -eq 1) {
            Write-Message -Level VeryVerbose -Message "Found a diff file, setting Log Anchor"
            $TlogAnchor = $DiffAnchor
        } else {
            $TlogAnchor = $FullDBAnchor
        }


        #Check T-log LSNs form a chain.
        $TranLogBackups = $TestHistory | Where-Object {$_.$TypeName -in ('Transaction Log', 'Log') -and $_.DatabaseBackupLSN -eq $FullDBAnchor.CheckPointLSN} | Sort-Object -Property LastLSN, FirstLsn
        for ($i = 0; $i -lt ($TranLogBackups.count)) {
            Write-Message -Level Debug -Message "looping t logs"
            if ($i -eq 0) {
                if ($TranLogBackups[$i].FirstLSN -gt $TlogAnchor.LastLSN) {
                    Write-Message -Level Warning -Message "Break in LSN Chain between $($TlogAnchor.FullName) and $($TranLogBackups[($i)].FullName) "
                    Write-Message -Level Verbose -Message "Anchor $($TlogAnchor.LastLSN) - FirstLSN $($TranLogBackups[$i].FirstLSN)"
                    return $false
                    break
                }
            } else {
                if ($TranLogBackups[($i - 1)].LastLsn -ne $TranLogBackups[($i)].FirstLSN -and ($TranLogBackups[($i)] -ne $TranLogBackups[($i - 1)])) {
                    Write-Message -Level Warning -Message "Break in transaction log between $($TranLogBackups[($i-1)].FullName) and $($TranLogBackups[($i)].FullName) "
                    return $false
                    break
                }
            }
            $i++

        }
        Write-Message -Level VeryVerbose -Message "Passed LSN Chain checks"
        return $true
    }
}

tools\dbatools\internal\functions\Test-DbaRestoreVersion.ps1

function Test-DbaRestoreVersion {
    <#
    .SYNOPSIS
        Checks that the restore files are from a version of SQL Server that can be restored on the target version

    .DESCRIPTION
        Finds the anchoring Full backup (or multiple if it's a striped set).
        Then filters to ensure that all the backups are from that anchor point (LastLSN) and that they're all on the same RecoveryForkID
        Then checks that we have either enough Diffs and T-log backups to get to where we want to go. And checks that there is no break between
        LastLSN and FirstLSN in sequential files

    .PARAMETER FilteredRestoreFiles
        This is just an object consisting of the output from Read-DbaBackupHeader. Normally this will have been filtered down to a restorable chain
        before arriving here. (ie; only 1 anchoring Full backup)

    .PARAMETER SqlInstance
        Sql Server Instance against which the restore is going to be performed

    .PARAMETER SqlCredential
        Credential for connecting to SqlInstance

    .PARAMETER SystemDatabaseRestore
        Switch when restoring system databases

    .NOTES
        Author: Stuart Moore (@napalmgram), stuart-moore.com
        Tags:
        dbatools PowerShell module (https://dbatools.io, [email protected])
       Copyright: (c) 2018 by dbatools, licensed under MIT
        License: MIT https://opensource.org/licenses/MIT

    .EXAMPLE
        Test-DbaRestoreVersion -FilteredRestoreFiles $FilteredFiles -SqlInstance server1\instance1

        Checks that the Restore chain in $FilteredFiles is compatible with the SQL Server version of server1\instance1

    #>
    [CmdletBinding()]
    param (
        [parameter(Mandatory)]
        [Alias("ServerInstance", "SqlServer")]
        [object]$SqlInstance,
        [parameter(Mandatory)]
        [object[]]$FilteredRestoreFiles,
        [PSCredential]$SqlCredential,
        [switch]$SystemDatabaseRestore
    )
    $RestoreVersion = ($FilteredRestoreFiles.SoftwareVersionMajor | Measure-Object -average).average
    Write-Message -Level Verbose -Message "RestoreVersion is $RestoreVersion"
    #Test to make sure we don't have an upgrade mid backup chain, there's a reason I'm paranoid..
    if ([int]$RestoreVersion -ne $RestoreVersion) {
        Write-Message -Level Warning -Message "Version number change during backups - $RestoreVersion"
        return $false
        break
    }
    #Can't restore backwards
    try {
        if ($SqlInstance -isnot [Microsoft.SqlServer.Management.Smo.SqlSmoObject]) {
            $Newconnection = $true
            $Server = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $SqlCredential
        } else {
            $server = $SqlInstance
        }
    } catch {
        Write-Message -Level Warning -Message "Cannot connect to $SqlInstance"
        break
    }

    if ($SystemDatabaseRestore) {
        if ($RestoreVersion -ne $Server.VersionMajor) {
            Write-Message -Level Warning -Message "For System Database restore versions must match)"
            return $false
            break
        }
    } else {
        if ($RestoreVersion -gt $Server.VersionMajor) {
            Write-Message -Level Warning -Message "Backups are from a newer version of SQL Server than $($Server.Name)"
            return $false
            break
        }

        if (($Server.VersionMajor -gt 10 -and $RestoreVersion -lt 9)  ) {
            Write-Message -Level Warning -Message "This version - $RestoreVersion - too old to restore on to $($Server.Name)"
            return $false
            break
        }
    }
    if ($Newconnection) {
        $server.ConnectionContext.Disconnect()
    }
    return $True
}

tools\dbatools\optional\Expand-Archive.ps1

if ($PSVersionTable.PSVersion.Major -lt 5) {


    <#
Copied from the Microsoft Module: Microsoft.PowerShell.Archive
Which ships with PowerShell Version 5 but will run under v3.
    #>



    function Expand-Archive {
        <#
            .SYNOPSIS
                Extracts files from a specified archive (zipped) file.

            .DESCRIPTION
                The Expand-Archive cmdlet extracts files from a specified zipped archive file to a specified destination folder. An archive file allows multiple files to be packaged, and optionally compressed, into a single zipped file for easier distribution and storage.

            .PARAMETER Path
                Specifies the path to the archive file.

            .PARAMETER LiteralPath
                Specifies the path to an archive file. Unlike the Path parameter, the value of LiteralPath is used exactly as it is typed. Wildcard characters are not supported. If the path includes escape characters, enclose each escape character in single quotation marks, to instruct Windows PowerShell not to interpret any characters as escape sequences.

            .PARAMETER DestinationPath
                Specifies the path to the folder in which you want the command to save extracted files. Enter the path to a folder, but do not specify a file name or file name extension. This parameter is required.

            .PARAMETER Force
                Forces the command to run without asking for user confirmation.

            .PARAMETER Confirm
                Prompts you for confirmation before running the cmdlet.

            .PARAMETER WhatIf
                Shows what would happen if the cmdlet runs. The cmdlet is not run.

            .EXAMPLE
                Example 1: Extract the contents of an archive

                PS C:\>Expand-Archive -LiteralPath C:\Archives\Draft.Zip -DestinationPath C:\Reference

                This command extracts the contents of an existing archive file, Draft.zip, into the folder specified by the DestinationPath parameter, C:\Reference.

            .EXAMPLE
                Example 2: Extract the contents of an archive in the current folder

                PS C:\>Expand-Archive -Path Draft.Zip -DestinationPath C:\Reference

                This command extracts the contents of an existing archive file in the current folder, Draft.zip, into the folder specified by the DestinationPath parameter, C:\Reference.
        #>
        [CmdletBinding(
            DefaultParameterSetName = "Path",
            SupportsShouldProcess,
            HelpUri = "http://go.microsoft.com/fwlink/?LinkID=393253")]
        param
        (
            [parameter (
                Mandatory,
                Position = 0,
                ParameterSetName = "Path",
                ValueFromPipeline,
                ValueFromPipelineByPropertyName = $true)]
            [ValidateNotNullOrEmpty()]
            [string]
            $Path,

            [parameter (
                Mandatory,
                ParameterSetName = "LiteralPath",
                ValueFromPipelineByPropertyName = $true)]
            [ValidateNotNullOrEmpty()]
            [Alias("PSPath")]
            [string]
            $LiteralPath,

            [parameter (
                Position = 1,
                ValueFromPipeline = $false,
                ValueFromPipelineByPropertyName = $false)]
            [ValidateNotNullOrEmpty()]
            [string]
            $DestinationPath,

            [parameter (
                ValueFromPipeline = $false,
                ValueFromPipelineByPropertyName = $false)]
            [switch]
            $Force
        )

        BEGIN {
            Add-Type -AssemblyName System.IO.Compression -ErrorAction Ignore
            Add-Type -AssemblyName System.IO.Compression.FileSystem -ErrorAction Ignore

            $zipFileExtension = ".zip"

            $LocalizedData = ConvertFrom-StringData @'
    PathNotFoundError=The path '{0}' either does not exist or is not a valid file system path.
    ExpandArchiveInValidDestinationPath=The path '{0}' is not a valid file system directory path.
    InvalidZipFileExtensionError={0} is not a supported archive file format. {1} is the only supported archive file format.
    ArchiveFileIsReadOnly=The attributes of the archive file {0} is set to 'ReadOnly' hence it cannot be updated. If you intend to update the existing archive file, remove the 'ReadOnly' attribute on the archive file else use -Force parameter to override and create a new archive file.
    ZipFileExistError=The archive file {0} already exists. Use the -Update parameter to update the existing archive file or use the -Force parameter to overwrite the existing archive file.
    DuplicatePathFoundError=The input to {0} parameter contains a duplicate path '{1}'. Provide a unique set of paths as input to {2} parameter.
    ArchiveFileIsEmpty=The archive file {0} is empty.
    CompressProgressBarText=The archive file '{0}' creation is in progress...
    ExpandProgressBarText=The archive file '{0}' expansion is in progress...
    AppendArchiveFileExtensionMessage=The archive file path '{0}' supplied to the DestinationPath patameter does not include .zip extension. Hence .zip is appended to the supplied DestinationPath path and the archive file would be created at '{1}'.
    AddItemtoArchiveFile=Adding '{0}'.
    CreateFileAtExpandedPath=Created '{0}'.
    InvalidArchiveFilePathError=The archive file path '{0}' specified as input to the {1} parameter is resolving to multiple file system paths. Provide a unique path to the {2} parameter where the archive file has to be created.
    InvalidExpandedDirPathError=The directory path '{0}' specified as input to the DestinationPath parameter is resolving to multiple file system paths. Provide a unique path to the Destination parameter where the archive file contents have to be expanded.
    FileExistsError=Failed to create file '{0}' while expanding the archive file '{1}' contents as the file '{2}' already exists. Use the -Force parameter if you want to overwrite the existing directory '{3}' contents when expanding the archive file.
    DeleteArchiveFile=The partially created archive file '{0}' is deleted as it is not usable.
    InvalidDestinationPath=The destination path '{0}' does not contain a valid archive file name.
    PreparingToCompressVerboseMessage=Preparing to compress...
    PreparingToExpandVerboseMessage=Preparing to expand...
'@

            #region Utility Functions
            function GetResolvedPathHelper {
                param
                (
                    [string[]]
                    $path,

                    [boolean]
                    $isLiteralPath,

                    [System.Management.Automation.PSCmdlet]
                    $callerPSCmdlet
                )

                $resolvedPaths = @()

                # null and empty check are are already done on Path parameter at the cmdlet layer.
                foreach ($currentPath in $path) {
                    try {
                        if ($isLiteralPath) {
                            $currentResolvedPaths = Resolve-Path -LiteralPath $currentPath -ErrorAction Stop
                        } else {
                            $currentResolvedPaths = Resolve-Path -Path $currentPath -ErrorAction Stop
                        }
                    } catch {
                        $errorMessage = ($LocalizedData.PathNotFoundError -f $currentPath)
                        $exception = New-Object System.InvalidOperationException $errorMessage, $_.Exception
                        $errorRecord = CreateErrorRecordHelper "ArchiveCmdletPathNotFound" $null ([System.Management.Automation.ErrorCategory]::InvalidArgument) $exception $currentPath
                        $callerPSCmdlet.ThrowTerminatingError($errorRecord)
                    }

                    foreach ($currentResolvedPath in $currentResolvedPaths) {
                        $resolvedPaths += $currentResolvedPath.ProviderPath
                    }
                }

                $resolvedPaths
            }

            function Add-CompressionAssemblies {

                if ($PSEdition -eq "Desktop") {
                    Add-Type -AssemblyName System.IO.Compression
                    Add-Type -AssemblyName System.IO.Compression.FileSystem
                }
            }

            function IsValidFileSystemPath {
                param
                (
                    [string[]]
                    $path
                )

                $result = $true;

                # null and empty check are are already done on Path parameter at the cmdlet layer.
                foreach ($currentPath in $path) {
                    if (!([System.IO.File]::Exists($currentPath) -or [System.IO.Directory]::Exists($currentPath))) {
                        $errorMessage = ($LocalizedData.PathNotFoundError -f $currentPath)
                        ThrowTerminatingErrorHelper "PathNotFound" $errorMessage ([System.Management.Automation.ErrorCategory]::InvalidArgument) $currentPath
                    }
                }

                return $result;
            }


            function ValidateDuplicateFileSystemPath {
                param
                (
                    [string]
                    $inputParameter,

                    [string[]]
                    $path
                )

                $uniqueInputPaths = @()

                # null and empty check are are already done on Path parameter at the cmdlet layer.
                foreach ($currentPath in $path) {
                    $currentInputPath = $currentPath.ToUpper()
                    if ($uniqueInputPaths.Contains($currentInputPath)) {
                        $errorMessage = ($LocalizedData.DuplicatePathFoundError -f $inputParameter, $currentPath, $inputParameter)
                        ThrowTerminatingErrorHelper "DuplicatePathFound" $errorMessage ([System.Management.Automation.ErrorCategory]::InvalidArgument) $currentPath
                    } else {
                        $uniqueInputPaths += $currentInputPath
                    }
                }
            }

            function CompressionLevelMapper {
                param
                (
                    [string]
                    $compressionLevel
                )

                $compressionLevelFormat = [System.IO.Compression.CompressionLevel]::Optimal

                # CompressionLevel format is already validated at the cmdlet layer.
                switch ($compressionLevel.ToString()) {
                    "Fastest" {
                        $compressionLevelFormat = [System.IO.Compression.CompressionLevel]::Fastest
                    }
                    "NoCompression" {
                        $compressionLevelFormat = [System.IO.Compression.CompressionLevel]::NoCompression
                    }
                }

                return $compressionLevelFormat
            }

            function CompressArchiveHelper {
                param
                (
                    [string[]]
                    $sourcePath,

                    [string]
                    $destinationPath,

                    [string]
                    $compressionLevel,

                    [bool]
                    $isUpdateMode
                )

                $numberOfItemsArchived = 0
                $sourceFilePaths = @()
                $sourceDirPaths = @()

                foreach ($currentPath in $sourcePath) {
                    $result = Test-Path -LiteralPath $currentPath -PathType Leaf
                    if ($result -eq $true) {
                        $sourceFilePaths += $currentPath
                    } else {
                        $sourceDirPaths += $currentPath
                    }
                }

                # The Soure Path contains one or more directory (this directory can have files under it) and no files to be compressed.
                if ($sourceFilePaths.Count -eq 0 -and $sourceDirPaths.Count -gt 0) {
                    $currentSegmentWeight = 100 / [double]$sourceDirPaths.Count
                    $previousSegmentWeight = 0
                    foreach ($currentSourceDirPath in $sourceDirPaths) {
                        $count = CompressSingleDirHelper $currentSourceDirPath $destinationPath $compressionLevel $true $isUpdateMode $previousSegmentWeight $currentSegmentWeight
                        $numberOfItemsArchived += $count
                        $previousSegmentWeight += $currentSegmentWeight
                    }
                }

                # The Soure Path contains only files to be compressed.
                elseIf ($sourceFilePaths.Count -gt 0 -and $sourceDirPaths.Count -eq 0) {
                    # $previousSegmentWeight is equal to 0 as there are no prior segments.
                    # $currentSegmentWeight is set to 100 as all files have equal weightage.
                    $previousSegmentWeight = 0
                    $currentSegmentWeight = 100

                    $numberOfItemsArchived = CompressFilesHelper $sourceFilePaths $destinationPath $compressionLevel $isUpdateMode $previousSegmentWeight $currentSegmentWeight
                }
                # The Soure Path contains one or more files and one or more directories (this directory can have files under it) to be compressed.
                elseif ($sourceFilePaths.Count -gt 0 -and $sourceDirPaths.Count -gt 0) {
                    # each directory is considered as an individual segments & all the individual files are clubed in to a separate sgemnet.
                    $currentSegmentWeight = 100 / [double]($sourceDirPaths.Count + 1)
                    $previousSegmentWeight = 0

                    foreach ($currentSourceDirPath in $sourceDirPaths) {
                        $count = CompressSingleDirHelper $currentSourceDirPath $destinationPath $compressionLevel $true $isUpdateMode $previousSegmentWeight $currentSegmentWeight
                        $numberOfItemsArchived += $count
                        $previousSegmentWeight += $currentSegmentWeight
                    }

                    $count = CompressFilesHelper $sourceFilePaths $destinationPath $compressionLevel $isUpdateMode $previousSegmentWeight $currentSegmentWeight
                    $numberOfItemsArchived += $count
                }

                return $numberOfItemsArchived
            }

            function CompressFilesHelper {
                param
                (
                    [string[]]
                    $sourceFilePaths,

                    [string]
                    $destinationPath,

                    [string]
                    $compressionLevel,

                    [bool]
                    $isUpdateMode,

                    [double]
                    $previousSegmentWeight,

                    [double]
                    $currentSegmentWeight
                )

                $numberOfItemsArchived = ZipArchiveHelper $sourceFilePaths $destinationPath $compressionLevel $isUpdateMode $null $previousSegmentWeight $currentSegmentWeight

                return $numberOfItemsArchived
            }

            function CompressSingleDirHelper {
                param
                (
                    [string]
                    $sourceDirPath,

                    [string]
                    $destinationPath,

                    [string]
                    $compressionLevel,

                    [bool]
                    $useParentDirAsRoot,

                    [bool]
                    $isUpdateMode,

                    [double]
                    $previousSegmentWeight,

                    [double]
                    $currentSegmentWeight
                )

                [System.Collections.Generic.List[System.String]]$subDirFiles = @()

                if ($useParentDirAsRoot) {
                    $sourceDirInfo = New-Object -TypeName System.IO.DirectoryInfo -ArgumentList $sourceDirPath
                    $sourceDirFullName = $sourceDirInfo.Parent.FullName

                    # If the directory is present at the drive level the DirectoryInfo.Parent include '\' example: C:\
                    # On the other hand if the directory exists at a deper level then DirectoryInfo.Parent
                    # has just the path (without an ending '\'). example C:\source
                    if ($sourceDirFullName.Length -eq 3) {
                        $modifiedSourceDirFullName = $sourceDirFullName
                    } else {
                        $modifiedSourceDirFullName = $sourceDirFullName + "\"
                    }
                } else {
                    $sourceDirFullName = $sourceDirPath
                    $modifiedSourceDirFullName = $sourceDirFullName + "\"
                }

                $dirContents = Get-ChildItem -LiteralPath $sourceDirPath -Recurse
                foreach ($currentContent in $dirContents) {
                    $isContainer = $currentContent -is [System.IO.DirectoryInfo]
                    if (!$isContainer) {
                        $subDirFiles.Add($currentContent.FullName)
                    } else {
                        # The currentContent points to a directory.
                        # We need to check if the directory is an empty directory, if so such a
                        # directory has to be explictly added to the archive file.
                        # if there are no files in the directory the GetFiles() API returns an empty array.
                        $files = $currentContent.GetFiles()
                        if ($files.Count -eq 0) {
                            $subDirFiles.Add($currentContent.FullName + "\")
                        }
                    }
                }

                $numberOfItemsArchived = ZipArchiveHelper $subDirFiles.ToArray() $destinationPath $compressionLevel $isUpdateMode $modifiedSourceDirFullName $previousSegmentWeight $currentSegmentWeight

                return $numberOfItemsArchived
            }

            function ZipArchiveHelper {
                param
                (
                    [System.Collections.Generic.List[System.String]]
                    $sourcePaths,

                    [string]
                    $destinationPath,

                    [string]
                    $compressionLevel,

                    [bool]
                    $isUpdateMode,

                    [string]
                    $modifiedSourceDirFullName,

                    [double]
                    $previousSegmentWeight,

                    [double]
                    $currentSegmentWeight
                )

                $numberOfItemsArchived = 0
                $fileMode = [System.IO.FileMode]::Create
                $result = Test-Path -LiteralPath $DestinationPath -PathType Leaf
                if ($result -eq $true) {
                    $fileMode = [System.IO.FileMode]::Open
                }

                Add-CompressionAssemblies

                try {
                    # At this point we are sure that the archive file has write access.
                    $archiveFileStreamArgs = @($destinationPath, $fileMode)
                    $archiveFileStream = New-Object -TypeName System.IO.FileStream -ArgumentList $archiveFileStreamArgs

                    $zipArchiveArgs = @($archiveFileStream, [System.IO.Compression.ZipArchiveMode]::Update, $false)
                    $zipArchive = New-Object -TypeName System.IO.Compression.ZipArchive -ArgumentList $zipArchiveArgs

                    $currentEntryCount = 0
                    $progressBarStatus = ($LocalizedData.CompressProgressBarText -f $destinationPath)
                    $bufferSize = 4kb
                    $buffer = New-Object Byte[] $bufferSize

                    foreach ($currentFilePath in $sourcePaths) {
                        if ($modifiedSourceDirFullName -ne $null -and $modifiedSourceDirFullName.Length -gt 0) {
                            $index = $currentFilePath.IndexOf($modifiedSourceDirFullName, [System.StringComparison]::OrdinalIgnoreCase)
                            $currentFilePathSubString = $currentFilePath.Substring($index, $modifiedSourceDirFullName.Length)
                            $relativeFilePath = $currentFilePath.Replace($currentFilePathSubString, "").Trim()
                        } else {
                            $relativeFilePath = [System.IO.Path]::GetFileName($currentFilePath)
                        }

                        # Update mode is selected.
                        # Check to see if archive file already contains one or more zip files in it.
                        if ($isUpdateMode -eq $true -and $zipArchive.Entries.Count -gt 0) {
                            $entryToBeUpdated = $null

                            # Check if the file already exists in the archive file.
                            # If so replace it with new file from the input source.
                            # If the file does not exist in the archive file then default to
                            # create mode and create the entry in the archive file.

                            foreach ($currentArchiveEntry in $zipArchive.Entries) {
                                if ($currentArchiveEntry.FullName -eq $relativeFilePath) {
                                    $entryToBeUpdated = $currentArchiveEntry
                                    break
                                }
                            }

                            if ($entryToBeUpdated -ne $null) {
                                $addItemtoArchiveFileMessage = ($LocalizedData.AddItemtoArchiveFile -f $currentFilePath)
                                $entryToBeUpdated.Delete()
                            }
                        }

                        $compression = CompressionLevelMapper $compressionLevel

                        # If a directory needs to be added to an archive file,
                        # by convention the .Net API's expect the path of the diretcory
                        # to end with '\' to detect the path as an directory.
                        if (!$relativeFilePath.EndsWith("\", [StringComparison]::OrdinalIgnoreCase)) {
                            try {
                                try {
                                    $currentFileStream = [System.IO.File]::Open($currentFilePath, [System.IO.FileMode]::Open, [System.IO.FileAccess]::Read)
                                } catch {
                                    # Failed to access the file. Write a non terminating error to the pipeline
                                    # and move on with the remaining files.
                                    $exception = $_.Exception
                                    if ($null -ne $_.Exception -and
                                        $null -ne $_.Exception.InnerException) {
                                        $exception = $_.Exception.InnerException
                                    }
                                    $errorRecord = CreateErrorRecordHelper "CompressArchiveUnauthorizedAccessError" $null ([System.Management.Automation.ErrorCategory]::PermissionDenied) $exception $currentFilePath
                                    Write-Error -ErrorRecord $errorRecord
                                }

                                if ($null -ne $currentFileStream) {
                                    $srcStream = New-Object System.IO.BinaryReader $currentFileStream

                                    $currentArchiveEntry = $zipArchive.CreateEntry($relativeFilePath, $compression)

                                    # Updating  the File Creation time so that the same timestamp would be retained after expanding the compressed file.
                                    # At this point we are sure that Get-ChildItem would succeed.
                                    $currentArchiveEntry.LastWriteTime = (Get-Item -LiteralPath $currentFilePath).LastWriteTime

                                    $destStream = New-Object System.IO.BinaryWriter $currentArchiveEntry.Open()

                                    while ($numberOfBytesRead = $srcStream.Read($buffer, 0, $bufferSize)) {
                                        $destStream.Write($buffer, 0, $numberOfBytesRead)
                                        $destStream.Flush()
                                    }

                                    $numberOfItemsArchived += 1
                                    $addItemtoArchiveFileMessage = ($LocalizedData.AddItemtoArchiveFile -f $currentFilePath)
                                }
                            } finally {
                                If ($null -ne $currentFileStream) {
                                    $currentFileStream.Dispose()
                                }
                                If ($null -ne $srcStream) {
                                    $srcStream.Dispose()
                                }
                                If ($null -ne $destStream) {
                                    $destStream.Dispose()
                                }
                            }
                        } else {
                            $currentArchiveEntry = $zipArchive.CreateEntry("$relativeFilePath", $compression)
                            $numberOfItemsArchived += 1
                            $addItemtoArchiveFileMessage = ($LocalizedData.AddItemtoArchiveFile -f $currentFilePath)
                        }

                        if ($null -ne $addItemtoArchiveFileMessage) {
                            Write-Verbose $addItemtoArchiveFileMessage
                        }

                        $currentEntryCount += 1
                        ProgressBarHelper "Compress-Archive" $progressBarStatus $previousSegmentWeight $currentSegmentWeight $sourcePaths.Count  $currentEntryCount
                    }
                } finally {
                    If ($null -ne $zipArchive) {
                        $zipArchive.Dispose()
                    }

                    If ($null -ne $archiveFileStream) {
                        $archiveFileStream.Dispose()
                    }

                    # Complete writing progress.
                    Write-Progress -Activity "Compress-Archive" -Completed
                }

                return $numberOfItemsArchived
            }

            <############################################################################################
# ValidateArchivePathHelper: This is a helper function used to validate the archive file
# path & its file format. The only supported archive file format is .zip
############################################################################################>
            function ValidateArchivePathHelper {
                param
                (
                    [string]
                    $archiveFile
                )

                if ([System.IO.File]::Exists($archiveFile)) {
                    $extension = [system.IO.Path]::GetExtension($archiveFile)

                    # Invalid file extension is specifed for the zip file.
                    if ($extension -ne $zipFileExtension) {
                        $errorMessage = ($LocalizedData.InvalidZipFileExtensionError -f $extension, $zipFileExtension)
                        ThrowTerminatingErrorHelper "NotSupportedArchiveFileExtension" $errorMessage ([System.Management.Automation.ErrorCategory]::InvalidArgument) $extension
                    }
                } else {
                    $errorMessage = ($LocalizedData.PathNotFoundError -f $archiveFile)
                    ThrowTerminatingErrorHelper "PathNotFound" $errorMessage ([System.Management.Automation.ErrorCategory]::InvalidArgument) $archiveFile
                }
            }

            <############################################################################################
# ExpandArchiveHelper: This is a helper function used to expand the archive file contents
# to the specified directory.
############################################################################################>
            function ExpandArchiveHelper {
                param
                (
                    [string]
                    $archiveFile,

                    [string]
                    $expandedDir,

                    [ref]
                    $expandedItems,

                    [boolean]
                    $force,

                    [boolean]
                    $isVerbose,

                    [boolean]
                    $isConfirm
                )

                Add-CompressionAssemblies

                try {
                    # The existance of archive file has already been validated by ValidateArchivePathHelper
                    # before calling this helper function.
                    $archiveFileStreamArgs = @($archiveFile, [System.IO.FileMode]::Open, [System.IO.FileAccess]::Read)
                    $archiveFileStream = New-Object -TypeName System.IO.FileStream -ArgumentList $archiveFileStreamArgs

                    $zipArchiveArgs = @($archiveFileStream, [System.IO.Compression.ZipArchiveMode]::Read, $false)
                    $zipArchive = New-Object -TypeName System.IO.Compression.ZipArchive -ArgumentList $zipArchiveArgs

                    if ($zipArchive.Entries.Count -eq 0) {
                        $archiveFileIsEmpty = ($LocalizedData.ArchiveFileIsEmpty -f $archiveFile)
                        Write-Verbose $archiveFileIsEmpty
                        return
                    }

                    $currentEntryCount = 0
                    $progressBarStatus = ($LocalizedData.ExpandProgressBarText -f $archiveFile)

                    # The archive entries can either be empty directories or files.
                    foreach ($currentArchiveEntry in $zipArchive.Entries) {
                        $currentArchiveEntryPath = Join-Path -Path $expandedDir -ChildPath $currentArchiveEntry.FullName
                        $extension = [system.IO.Path]::GetExtension($currentArchiveEntryPath)

                        # The current archive entry is an empty directory
                        # The FullName of the Archive Entry representing a directory would end with a trailing '\'.
                        if ($extension -eq [string]::Empty -and
                            $currentArchiveEntryPath.EndsWith("\", [StringComparison]::OrdinalIgnoreCase)) {
                            $pathExists = Test-Path -LiteralPath $currentArchiveEntryPath

                            # The current archive entry expects an empty directory.
                            # Check if the existing directory is empty. If its not empty
                            # then it means that user has added this directory by other means.
                            if ($pathExists -eq $false) {
                                New-Item $currentArchiveEntryPath -ItemType Directory -Confirm:$isConfirm | Out-Null

                                if (Test-Path -LiteralPath $currentArchiveEntryPath -PathType Container) {
                                    $addEmptyDirectorytoExpandedPathMessage = ($LocalizedData.AddItemtoArchiveFile -f $currentArchiveEntryPath)
                                    Write-Verbose $addEmptyDirectorytoExpandedPathMessage

                                    $expandedItems.Value += $currentArchiveEntryPath
                                }
                            }
                        } else {
                            try {
                                $currentArchiveEntryFileInfo = New-Object -TypeName System.IO.FileInfo -ArgumentList $currentArchiveEntryPath
                                $parentDirExists = Test-Path -LiteralPath $currentArchiveEntryFileInfo.DirectoryName -PathType Container

                                # If the Parent directory of the current entry in the archive file does not exist, then create it.
                                if ($parentDirExists -eq $false) {
                                    New-Item $currentArchiveEntryFileInfo.DirectoryName -ItemType Directory -Confirm:$isConfirm | Out-Null

                                    if (!(Test-Path -LiteralPath $currentArchiveEntryFileInfo.DirectoryName -PathType Container)) {
                                        # The directory referred by $currentArchiveEntryFileInfo.DirectoryName was not successfully created.
                                        # This could be because the user has specified -Confirm paramter when Expand-Archive was invoked
                                        # and authorization was not provided when confirmation was prompted. In such a scenario,
                                        # we skip the current file in the archive and continue with the remaining archive file contents.
                                        Continue
                                    }

                                    $expandedItems.Value += $currentArchiveEntryFileInfo.DirectoryName
                                }

                                $hasNonTerminatingError = $false

                                # Check if the file in to which the current archive entry contents
                                # would be expanded already exists.
                                if ($currentArchiveEntryFileInfo.Exists) {
                                    if ($force) {
                                        Remove-Item -LiteralPath $currentArchiveEntryFileInfo.FullName -Force -ErrorVariable ev -Verbose:$isVerbose -Confirm:$isConfirm
                                        if ($ev -ne $null) {
                                            $hasNonTerminatingError = $true
                                        }

                                        if (Test-Path -LiteralPath $currentArchiveEntryFileInfo.FullName -PathType Leaf) {
                                            # The file referred by $currentArchiveEntryFileInfo.FullName was not successfully removed.
                                            # This could be because the user has specified -Confirm paramter when Expand-Archive was invoked
                                            # and authorization was not provided when confirmation was prompted. In such a scenario,
                                            # we skip the current file in the archive and continue with the remaining archive file contents.
                                            Continue
                                        }
                                    } else {
                                        # Write non-terminating error to the pipeline.
                                        $errorMessage = ($LocalizedData.FileExistsError -f $currentArchiveEntryFileInfo.FullName, $archiveFile, $currentArchiveEntryFileInfo.FullName, $currentArchiveEntryFileInfo.FullName)
                                        $errorRecord = CreateErrorRecordHelper "ExpandArchiveFileExists" $errorMessage ([System.Management.Automation.ErrorCategory]::InvalidOperation) $null $currentArchiveEntryFileInfo.FullName
                                        Write-Error -ErrorRecord $errorRecord
                                        $hasNonTerminatingError = $true
                                    }
                                }

                                if (!$hasNonTerminatingError) {
                                    [System.IO.Compression.ZipFileExtensions]::ExtractToFile($currentArchiveEntry, $currentArchiveEntryPath, $false)

                                    # Add the expanded file path to the $expandedItems array,
                                    # to keep track of all the expanded files created while expanding the archive file.
                                    # If user enters CTRL + C then at that point of time, all these expanded files
                                    # would be deleted as part of the clean up process.
                                    $expandedItems.Value += $currentArchiveEntryPath

                                    $addFiletoExpandedPathMessage = ($LocalizedData.CreateFileAtExpandedPath -f $currentArchiveEntryPath)
                                    Write-Verbose $addFiletoExpandedPathMessage
                                }
                            } finally {
                                If ($null -ne $destStream) {
                                    $destStream.Dispose()
                                }

                                If ($null -ne $srcStream) {
                                    $srcStream.Dispose()
                                }
                            }
                        }

                        $currentEntryCount += 1
                        # $currentSegmentWeight is Set to 100 giving equal weightage to each file that is getting expanded.
                        # $previousSegmentWeight is set to 0 as there are no prior segments.
                        $previousSegmentWeight = 0
                        $currentSegmentWeight = 100
                        ProgressBarHelper "Expand-Archive" $progressBarStatus $previousSegmentWeight $currentSegmentWeight $zipArchive.Entries.Count  $currentEntryCount
                    }
                } finally {
                    If ($null -ne $zipArchive) {
                        $zipArchive.Dispose()
                    }

                    If ($null -ne $archiveFileStream) {
                        $archiveFileStream.Dispose()
                    }

                    # Complete writing progress.
                    Write-Progress -Activity "Expand-Archive" -Completed
                }
            }

            <############################################################################################
# ProgressBarHelper: This is a helper function used to display progress message.
# This function is used by both Compress-Archive & Expand-Archive to display archive file
# creation/expansion progress.
############################################################################################>
            function ProgressBarHelper {
                param
                (
                    [string]
                    $cmdletName,

                    [string]
                    $status,

                    [double]
                    $previousSegmentWeight,

                    [double]
                    $currentSegmentWeight,

                    [int]
                    $totalNumberofEntries,

                    [int]
                    $currentEntryCount
                )

                if ($currentEntryCount -gt 0 -and
                    $totalNumberofEntries -gt 0 -and
                    $previousSegmentWeight -ge 0 -and
                    $currentSegmentWeight -gt 0) {
                    $entryDefaultWeight = $currentSegmentWeight / [double]$totalNumberofEntries

                    $percentComplete = $previousSegmentWeight + ($entryDefaultWeight * $currentEntryCount)
                    Write-Progress -Activity $cmdletName -Status $status -PercentComplete $percentComplete
                }
            }

            <############################################################################################
# CSVHelper: This is a helper function used to append comma after each path specifid by
# the SourcePath array. This helper function is used to display all the user supplied paths
# in the WhatIf message.
############################################################################################>
            function CSVHelper {
                param
                (
                    [string[]]
                    $sourcePath
                )

                # SourcePath has already been validated by the calling funcation.
                if ($sourcePath.Count -gt 1) {
                    $sourcePathInCsvFormat = "`n"
                    for ($currentIndex = 0; $currentIndex -lt $sourcePath.Count; $currentIndex++) {
                        if ($currentIndex -eq $sourcePath.Count - 1) {
                            $sourcePathInCsvFormat += $sourcePath[$currentIndex]
                        } else {
                            $sourcePathInCsvFormat += $sourcePath[$currentIndex] + "`n"
                        }
                    }
                } else {
                    $sourcePathInCsvFormat = $sourcePath
                }

                return $sourcePathInCsvFormat
            }

            <############################################################################################
# ThrowTerminatingErrorHelper: This is a helper function used to throw terminating error.
############################################################################################>
            function ThrowTerminatingErrorHelper {
                param
                (
                    [string]
                    $errorId,

                    [string]
                    $errorMessage,

                    [System.Management.Automation.ErrorCategory]
                    $errorCategory,

                    [object]
                    $targetObject,

                    [Exception]
                    $innerException
                )

                if ($innerException -eq $null) {
                    $exception = New-object System.IO.IOException $errorMessage
                } else {
                    $exception = New-Object System.IO.IOException $errorMessage, $innerException
                }

                $exception = New-Object System.IO.IOException $errorMessage
                $errorRecord = New-Object System.Management.Automation.ErrorRecord $exception, $errorId, $errorCategory, $targetObject
                $PSCmdlet.ThrowTerminatingError($errorRecord)
            }

            <############################################################################################
# CreateErrorRecordHelper: This is a helper function used to create an ErrorRecord
############################################################################################>
            function CreateErrorRecordHelper {
                param
                (
                    [string]
                    $errorId,

                    [string]
                    $errorMessage,

                    [System.Management.Automation.ErrorCategory]
                    $errorCategory,

                    [Exception]
                    $exception,

                    [object]
                    $targetObject
                )

                if ($null -eq $exception) {
                    $exception = New-Object System.IO.IOException $errorMessage
                }

                $errorRecord = New-Object System.Management.Automation.ErrorRecord $exception, $errorId, $errorCategory, $targetObject
                return $errorRecord
            }
            #endregion Utility Functions

            $isVerbose = $psboundparameters.ContainsKey("Verbose")
            $isConfirm = $psboundparameters.ContainsKey("Confirm")

            $isDestinationPathProvided = $true
            if ($DestinationPath -eq [string]::Empty) {
                $resolvedDestinationPath = $pwd
                $isDestinationPathProvided = $false
            } else {
                $destinationPathExists = Test-Path -Path $DestinationPath -PathType Container
                if ($destinationPathExists) {
                    $resolvedDestinationPath = GetResolvedPathHelper $DestinationPath $false $PSCmdlet
                    if ($resolvedDestinationPath.Count -gt 1) {
                        $errorMessage = ($LocalizedData.InvalidExpandedDirPathError -f $DestinationPath)
                        ThrowTerminatingErrorHelper "InvalidDestinationPath" $errorMessage ([System.Management.Automation.ErrorCategory]::InvalidArgument) $DestinationPath
                    }

                    # At this point we are sure that the provided path resolves to a valid single path.
                    # Calling Resolve-Path again to get the underlying provider name.
                    $suppliedDestinationPath = Resolve-Path -Path $DestinationPath
                    if ($suppliedDestinationPath.Provider.Name -ne "FileSystem") {
                        $errorMessage = ($LocalizedData.ExpandArchiveInValidDestinationPath -f $DestinationPath)
                        ThrowTerminatingErrorHelper "InvalidDirectoryPath" $errorMessage ([System.Management.Automation.ErrorCategory]::InvalidArgument) $DestinationPath
                    }
                } else {
                    $createdItem = New-Item -Path $DestinationPath -ItemType Directory -Confirm:$isConfirm -Verbose:$isVerbose -ErrorAction Stop
                    if ($createdItem -ne $null -and $createdItem.PSProvider.Name -ne "FileSystem") {
                        Remove-Item "$DestinationPath" -Force -Recurse -ErrorAction SilentlyContinue
                        $errorMessage = ($LocalizedData.ExpandArchiveInValidDestinationPath -f $DestinationPath)
                        ThrowTerminatingErrorHelper "InvalidDirectoryPath" $errorMessage ([System.Management.Automation.ErrorCategory]::InvalidArgument) $DestinationPath
                    }

                    $resolvedDestinationPath = GetResolvedPathHelper $DestinationPath $true $PSCmdlet
                }
            }

            $isWhatIf = $psboundparameters.ContainsKey("WhatIf")
            if (!$isWhatIf) {
                $preparingToExpandVerboseMessage = ($LocalizedData.PreparingToExpandVerboseMessage)
                Write-Verbose $preparingToExpandVerboseMessage

                $progressBarStatus = ($LocalizedData.ExpandProgressBarText -f $DestinationPath)
                ProgressBarHelper "Expand-Archive" $progressBarStatus 0 100 100 1
            }
        }
        PROCESS {
            switch ($PsCmdlet.ParameterSetName) {
                "Path" {
                    $resolvedSourcePaths = GetResolvedPathHelper $Path $false $PSCmdlet

                    if ($resolvedSourcePaths.Count -gt 1) {
                        $errorMessage = ($LocalizedData.InvalidArchiveFilePathError -f $Path, $PsCmdlet.ParameterSetName, $PsCmdlet.ParameterSetName)
                        ThrowTerminatingErrorHelper "InvalidArchiveFilePath" $errorMessage ([System.Management.Automation.ErrorCategory]::InvalidArgument) $Path
                    }
                }
                "LiteralPath" {
                    $resolvedSourcePaths = GetResolvedPathHelper $LiteralPath $true $PSCmdlet

                    if ($resolvedSourcePaths.Count -gt 1) {
                        $errorMessage = ($LocalizedData.InvalidArchiveFilePathError -f $LiteralPath, $PsCmdlet.ParameterSetName, $PsCmdlet.ParameterSetName)
                        ThrowTerminatingErrorHelper "InvalidArchiveFilePath" $errorMessage ([System.Management.Automation.ErrorCategory]::InvalidArgument) $LiteralPath
                    }
                }
            }

            ValidateArchivePathHelper $resolvedSourcePaths

            if ($pscmdlet.ShouldProcess($resolvedSourcePaths)) {
                $expandedItems = @()

                try {
                    # StopProcessing is not avaliable in Script cmdlets. However the pipleline execution
                    # is terminated when ever 'CTRL + C' is entered by user to terminate the cmdlet execution.
                    # The finally block is executed whenever pipleline is terminated.
                    # $isArchiveFileProcessingComplete variable is used to track if 'CTRL + C' is entered by the
                    # user.
                    $isArchiveFileProcessingComplete = $false

                    # The User has not provided a destination path, hence we use '$pwd\ArchiveFileName' as the directory where the
                    # archive file contents would be expanded. If the path '$pwd\ArchiveFileName' already exists then we use the
                    # Windows default mechanism of appending a counter value at the end of the directory name where the contents
                    # would be expanded.
                    if (!$isDestinationPathProvided) {
                        $archiveFile = New-Object System.IO.FileInfo $resolvedSourcePaths
                        $resolvedDestinationPath = Join-Path -Path $resolvedDestinationPath -ChildPath $archiveFile.BaseName
                        $destinationPathExists = Test-Path -LiteralPath $resolvedDestinationPath -PathType Container

                        if (!$destinationPathExists) {
                            New-Item -Path $resolvedDestinationPath -ItemType Directory -Confirm:$isConfirm -Verbose:$isVerbose -ErrorAction Stop | Out-Null
                        }
                    }

                    ExpandArchiveHelper $resolvedSourcePaths $resolvedDestinationPath ([ref]$expandedItems) $Force $isVerbose $isConfirm

                    $isArchiveFileProcessingComplete = $true
                } finally {
                    # The $isArchiveFileProcessingComplete would be set to $false if user has typed 'CTRL + C' to
                    # terminate the cmdlet execution or if an unhandled exception is thrown.
                    if ($isArchiveFileProcessingComplete -eq $false) {
                        if ($expandedItems.Count -gt 0) {
                            # delete the expanded file/directory as the archive
                            # file was not completly expanded.
                            $expandedItems | ForEach-Object { Remove-Item $_ -Force -Recurse }
                        }
                    }
                }
            }
        }
    }
}

tools\dbatools\internal\functions\Test-HostOSLinux.ps1

function Test-HostOSLinux {
    param (
        [object]$SqlInstance,
        [object]$sqlcredential
    )

    $server = Connect-SqlInstance -SqlInstance $SqlInstance -SqlCredential $sqlcredential
    $server.ConnectionContext.ExecuteScalar("SELECT @@VERSION") -match "Linux"
}

tools\dbatools\optional\TabExpansionPlusPlus.ps1

if (-not (Get-Command -Name Register-ArgumentCompleter -ErrorAction Ignore)) {

    #############################################################################
    #
    # TabExpansionPlusPlus
    #
    #

    <#
Copyright (c) 2013, Jason Shirk
All rights reserved.

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this
   list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
   this list of conditions and the following disclaimer in the documentation
   and/or other materials provided with the distribution.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

    #>

    # Save off the previous tab completion so it can be restored if this module
    # is removed.
    $oldTabExpansion = $function:TabExpansion
    $oldTabExpansion2 = $function:TabExpansion2

    [bool]$updatedTypeData = $false


    #region Exported utility functions for completers

    #############################################################################
    #
    # Helper function to create a new completion results
    #
    function New-CompletionResult {
        param ([Parameter(Position = 0, ValueFromPipelineByPropertyName, Mandatory, ValueFromPipeline)]
            [ValidateNotNullOrEmpty()]
            [string]
            $CompletionText,

            [Parameter(Position = 1, ValueFromPipelineByPropertyName)]
            [string]
            $ToolTip,

            [Parameter(Position = 2, ValueFromPipelineByPropertyName)]
            [string]
            $ListItemText,

            [System.Management.Automation.CompletionResultType]
            $CompletionResultType = [System.Management.Automation.CompletionResultType]::ParameterValue,

            [switch]
            $NoQuotes = $false
        )

        process {
            $toolTipToUse = if ($ToolTip -eq '') { $CompletionText }
            else { $ToolTip }
            $listItemToUse = if ($ListItemText -eq '') { $CompletionText }
            else { $ListItemText }

            # If the caller explicitly requests that quotes
            # not be included, via the -NoQuotes parameter,
            # then skip adding quotes.

            if ($CompletionResultType -eq [System.Management.Automation.CompletionResultType]::ParameterValue -and -not $NoQuotes) {
                # Add single quotes for the caller in case they are needed.
                # We use the parser to robustly determine how it will treat
                # the argument.  If we end up with too many tokens, or if
                # the parser found something expandable in the results, we
                # know quotes are needed.

                $tokens = $null
                $null = [System.Management.Automation.Language.Parser]::ParseInput("echo $CompletionText", [ref]$tokens, [ref]$null)
                if ($tokens.Length -ne 3 -or
                    ($tokens[1] -is [System.Management.Automation.Language.StringExpandableToken] -and
                        $tokens[1].Kind -eq [System.Management.Automation.Language.TokenKind]::Generic)) {
                    $CompletionText = "'$CompletionText'"
                }
            }
            return New-Object System.Management.Automation.CompletionResult `
            ($CompletionText, $listItemToUse, $CompletionResultType, $toolTipToUse.Trim())
        }

    }

    #############################################################################
    #
    # .SYNOPSIS
    #
    #     This is a simple wrapper of Get-Command gets commands with a given
    #     parameter ignoring commands that use the parameter name as an alias.
    #
    function Get-CommandWithParameter {
        [CmdletBinding(DefaultParameterSetName = 'AllCommandSet')]
        param (
            [Parameter(ParameterSetName = 'AllCommandSet', Position = 0, ValueFromPipeline, ValueFromPipelineByPropertyName)]
            [ValidateNotNullOrEmpty()]
            [string[]]
            ${Name},

            [Parameter(ParameterSetName = 'CmdletSet', ValueFromPipelineByPropertyName)]
            [string[]]
            ${Verb},

            [Parameter(ParameterSetName = 'CmdletSet', ValueFromPipelineByPropertyName)]
            [string[]]
            ${Noun},

            [Parameter(ValueFromPipelineByPropertyName)]
            [string[]]
            ${Module},

            [ValidateNotNullOrEmpty()]
            [Parameter(Mandatory)]
            [string]
            ${ParameterName})

        begin {
            $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand('Get-Command', [System.Management.Automation.CommandTypes]::Cmdlet)
            $scriptCmd = { & $wrappedCmd @PSBoundParameters | Where-Object { $_.Parameters[$ParameterName] -ne $null } }
            $steppablePipeline = $scriptCmd.GetSteppablePipeline($myInvocation.CommandOrigin)
            $steppablePipeline.Begin($PSCmdlet)
        }
        process {
            $steppablePipeline.Process($_)
        }
        end {
            $steppablePipeline.End()
        }
    }

    #############################################################################
    #
    function Set-CompletionPrivateData {
        param (
            [ValidateNotNullOrEmpty()]
            [string]
            $Key,

            [object]
            $Value,

            [ValidateNotNullOrEmpty()]
            [int]
            $ExpirationSeconds = 604800
        )

        $Cache = [PSCustomObject]@{
            Value          = $Value
            ExpirationTime = (Get-Date).AddSeconds($ExpirationSeconds)
        }
        $completionPrivateData[$key] = $Cache
    }

    #############################################################################
    #
    function Get-CompletionPrivateData {
        param (
            [ValidateNotNullOrEmpty()]
            [string]
            $Key)

        if (!$Key)
        { return $completionPrivateData }

        $cacheValue = $completionPrivateData[$key]
        if ((Get-Date) -lt $cacheValue.ExpirationTime) {
            return $cacheValue.Value
        }
    }

    #############################################################################
    #
    function Get-CompletionWithExtension {
        param ([string]
            $lastWord,

            [string[]]
            $extensions)

        [System.Management.Automation.CompletionCompleters]::CompleteFilename($lastWord) |
            Where-Object {
            # Use ListItemText because it won't be quoted, CompletionText might be
            [System.IO.Path]::GetExtension($_.ListItemText) -in $extensions
        }
    }

    #############################################################################
    #
    function New-CommandTree {
        [CmdletBinding(DefaultParameterSetName = 'Default')]
        param (
            [Parameter(Position = 0, Mandatory, ParameterSetName = 'Default')]
            [Parameter(Position = 0, Mandatory, ParameterSetName = 'Argument')]
            [ValidateNotNullOrEmpty()]
            [string]
            $Completion,

            [Parameter(Position = 1, Mandatory, ParameterSetName = 'Default')]
            [Parameter(Position = 1, Mandatory, ParameterSetName = 'Argument')]
            [string]
            $Tooltip,

            [Parameter(ParameterSetName = 'Argument')]
            [switch]
            $Argument,

            [Parameter(Position = 2, ParameterSetName = 'Default')]
            [Parameter(Position = 1, ParameterSetName = 'ScriptBlockSet')]
            [scriptblock]
            $SubCommands,

            [Parameter(Position = 0, Mandatory, ParameterSetName = 'ScriptBlockSet')]
            [scriptblock]
            $CompletionGenerator
        )

        $actualSubCommands = $null
        if ($null -ne $SubCommands) {
            $actualSubCommands = [NativeCommandTreeNode[]](& $SubCommands)
        }

        switch ($PSCmdlet.ParameterSetName) {
            'Default' {
                New-Object NativeCommandTreeNode $Completion, $Tooltip, $actualSubCommands
                break
            }
            'Argument' {
                New-Object NativeCommandTreeNode $Completion, $Tooltip, $true
            }
            'ScriptBlockSet' {
                New-Object NativeCommandTreeNode $CompletionGenerator, $actualSubCommands
                break
            }
        }
    }

    #############################################################################
    #
    function Get-CommandTreeCompletion {
        param ($wordToComplete,

            $commandAst,

            [NativeCommandTreeNode[]]
            $CommandTree)

        $commandElements = $commandAst.CommandElements

        # Skip the first command element - it's the command name
        # Iterate through the remaining elements, stopping early
        # if we find the element that matches $wordToComplete.
        for ($i = 1; $i -lt $commandElements.Count; $i++) {
            if (!($commandElements[$i] -is [System.Management.Automation.Language.StringConstantExpressionAst])) {
                # Ignore arguments that are expressions.  In some rare cases this
                # could cause strange completions because the context is incorrect, e.g.:
                #    $c = 'advfirewall'
                #    netsh $c firewall
                # Here we would be in advfirewall firewall context, but we'd complete as
                # though we were in firewall context.
                continue
            }

            if ($commandElements[$i].Value -eq $wordToComplete) {
                $CommandTree = $CommandTree |
                    Where-Object { $_.Command -like "$wordToComplete*" -or $_.CompletionGenerator -ne $null }
                break
            }

            foreach ($subCommand in $CommandTree) {
                if ($subCommand.Command -eq $commandElements[$i].Value) {
                    if (!$subCommand.Argument) {
                        $CommandTree = $subCommand.SubCommands
                    }
                    break
                }
            }
        }

        if ($null -ne $CommandTree) {
            $CommandTree | ForEach-Object {
                if ($_.Command) {
                    $toolTip = if ($_.Tooltip) { $_.Tooltip }
                    else { $_.Command }
                    New-CompletionResult -CompletionText $_.Command -ToolTip $toolTip
                } else {
                    & $_.CompletionGenerator $wordToComplete $commandAst
                }
            }
        }
    }

    #endregion Exported utility functions for completers

    #region Exported functions

    #############################################################################
    #
    # .SYNOPSIS
    #     Register a ScriptBlock to perform argument completion for a
    #     given command or parameter.
    #
    # .DESCRIPTION
    #     Argument completion can be extended without needing to do any
    #     parsing in many cases. By registering a handler for specific
    #     commands and/or parameters, PowerShell will call the handler
    #     when appropriate.
    #
    #     There are 2 kinds of extensions - native and PowerShell. Native
    #     refers to commands external to PowerShell, e.g. net.exe. PowerShell
    #     completion covers any functions, scripts, or cmdlets where PowerShell
    #     can determine the correct parameter being completed.
    #
    #     When registering a native handler, you must specify the CommandName
    #     parameter. The CommandName is typically specified without any path
    #     or extension. If specifying a path and/or an extension, completion
    #     will only work when the command is specified that way when requesting
    #     completion.
    #
    #     When registering a PowerShell handler, you must specify the
    #     ParameterName parameter. The CommandName is optional - PowerShell will
    #     first try to find a handler based on the command and parameter, but
    #     if none is found, then it will try just the parameter name. This way,
    #     you could specify a handler for all commands that have a specific
    #     parameter.
    #
    #     A handler needs to return instances of
    #     System.Management.Automation.CompletionResult.
    #
    #     A native handler is passed 2 parameters:
    #
    #         param($wordToComplete, $commandAst)
    #
    #     $wordToComplete  - The argument being completed, possibly an empty string
    #     $commandAst      - The ast of the command being completed.
    #
    #     A PowerShell handler is passed 5 parameters:
    #
    #         param($commandName, $parameterName, $wordToComplete, $commandAst, $fakeBoundParameter)
    #
    #     $commandName        - The command name
    #     $parameterName      - The parameter name
    #     $wordToComplete     - The argument being completed, possibly an empty string
    #     $commandAst         - The parsed representation of the command being completed.
    #     $fakeBoundParameter - Like $PSBoundParameters, contains values for some of the parameters.
    #                           Certain values are not included, this does not mean a parameter was
    #                           not specified, just that getting the value could have had unintended
    #                           side effects, so no value was computed.
    #
    # .PARAMETER ParameterName
    #     The name of the parameter that the Completion parameter supports.
    #     This parameter is not supported for native completion and is
    #     mandatory for script completion.
    #
    # .PARAMETER CommandName
    #     The name of the command that the Completion parameter supports.
    #     This parameter is mandatory for native completion and is optional
    #     for script completion.
    #
    # .PARAMETER Completion
    #     A ScriptBlock that returns instances of CompletionResult. For
    #     native completion, the script block parameters are
    #
    #         param($wordToComplete, $commandAst)
    #
    #     For script completion, the parameters are:
    #
    #         param($commandName, $parameterName, $wordToComplete, $commandAst, $fakeBoundParameter)
    #
    # .PARAMETER Description
    #     A description of how the completion can be used.
    #
    function Register-ArgumentCompleter {
        [CmdletBinding(DefaultParameterSetName = "PowerShellSet")]
        param (
            [Parameter(ParameterSetName = "NativeSet", Mandatory)]
            [Parameter(ParameterSetName = "PowerShellSet")]
            [string[]]
            $CommandName = "",

            [Parameter(ParameterSetName = "PowerShellSet", Mandatory)]
            [string]
            $ParameterName = "",

            [Parameter(Mandatory)]
            [scriptblock]
            $ScriptBlock,

            [string]
            $Description,

            [Parameter(ParameterSetName = "NativeSet")]
            [switch]
            $Native)

        $fnDefn = $ScriptBlock.Ast -as [System.Management.Automation.Language.FunctionDefinitionAst]
        if (!$Description) {
            # See if the script block is really a function, if so, use the function name.
            $Description = if ($fnDefn -ne $null) { $fnDefn.Name }
            else { "" }
        }

        if ($MyInvocation.ScriptName -ne (& { $MyInvocation.ScriptName })) {
            # Make an unbound copy of the script block so it has access to TabExpansionPlusPlus when invoked.
            # We can skip this step if we created the script block (Register-ArgumentCompleter was
            # called internally).
            if ($fnDefn -ne $null) {
                $ScriptBlock = $ScriptBlock.Ast.Body.GetScriptBlock() # Don't reparse, just get a new ScriptBlock.
            } else {
                $ScriptBlock = $ScriptBlock.Ast.GetScriptBlock() # Don't reparse, just get a new ScriptBlock.
            }
        }

        foreach ($command in $CommandName) {
            if ($command -and $ParameterName) {
                $command += ":"
            }

            $key = if ($Native) { 'NativeArgumentCompleters' }
            else { 'CustomArgumentCompleters' }
            $tabExpansionOptions[$key]["${command}${ParameterName}"] = $ScriptBlock

            $tabExpansionDescriptions["${command}${ParameterName}$Native"] = $Description
        }
    }

    #############################################################################
    #
    # .SYNOPSIS
    #     Tests the registered argument completer
    #
    # .DESCRIPTION
    #     Invokes the registered parameteter completer for a specified command to make it easier to test
    #     a completer
    #
    # .EXAMPLE
    #  Test-ArgumentCompleter -CommandName Get-Verb -ParameterName Verb -WordToComplete Sta
    #
    # Test what would be completed if Get-Verb -Verb Sta<Tab> was typed at the prompt
    #
    # .EXAMPLE
    #  Test-ArgumentCompleter -NativeCommand Robocopy -WordToComplete /
    #
    # Test what would be completed if Robocopy /<Tab> was typed at the prompt
    #
    function Test-ArgumentCompleter {
        [CmdletBinding(DefaultParametersetName = 'PS')]
        param
        (
            [Parameter(Mandatory, Position = 1, ParameterSetName = 'PS')]
            [string]
            $CommandName
            ,

            [Parameter(Mandatory, Position = 2, ParameterSetName = 'PS')]
            [string]
            $ParameterName
            ,

            [Parameter(ParameterSetName = 'PS')]
            [System.Management.Automation.Language.CommandAst]
            $commandAst
            ,

            [Parameter(ParameterSetName = 'PS')]
            [Hashtable]
            $FakeBoundParameters = @{ }
            ,

            [Parameter(Mandatory, Position = 1, ParameterSetName = 'NativeCommand')]
            [string]
            $NativeCommand
            ,

            [Parameter(Position = 2, ParameterSetName = 'NativeCommand')]
            [Parameter(Position = 3, ParameterSetName = 'PS')]
            [string]
            $WordToComplete = ''

        )

        if ($PSCmdlet.ParameterSetName -eq 'NativeCommand') {
            $Tokens = $null
            $Errors = $null
            $ast = [System.Management.Automation.Language.Parser]::ParseInput($NativeCommand, [ref]$Tokens, [ref]$Errors)
            $commandAst = $ast.EndBlock.Statements[0].PipelineElements[0]
            $command = $commandAst.GetCommandName()
            $completer = $tabExpansionOptions.NativeArgumentCompleters[$command]
            if (-not $Completer) {
                throw "No argument completer registered for command '$Command' (from $NativeCommand)"
            }
            & $completer $WordToComplete $commandAst
        } else {
            $completer = $tabExpansionOptions.CustomArgumentCompleters["${CommandName}:$ParameterName"]
            if (-not $Completer) {
                throw "No argument completer registered for '${CommandName}:$ParameterName'"
            }
            & $completer $CommandName $ParameterName $WordToComplete $commandAst $FakeBoundParameters
        }
    }

    #############################################################################
    #
    # .SYNOPSIS
    # Retrieves a list of argument completers that have been loaded into the
    # PowerShell session.
    #
    # .PARAMETER Name
    # The name of the argument complete to retrieve. This parameter supports
    # wildcards (asterisk).
    #
    # .EXAMPLE
    # Get-ArgumentCompleter -Name *Azure*;
    function Get-ArgumentCompleter {
        [CmdletBinding()]
        param ([string[]]
            $Name = '*')

        if (!$updatedTypeData) {
            # Define the default display properties for the objects returned by Get-ArgumentCompleter
            [string[]]$properties = "Command", "Parameter"
            Update-TypeData -TypeName 'TabExpansionPlusPlus.ArgumentCompleter' -DefaultDisplayPropertySet $properties -Force
            $updatedTypeData = $true
        }

        function WriteCompleters {
            function WriteCompleter($command, $parameter, $native, $scriptblock) {
                foreach ($n in $Name) {
                    if ($command -like $n) {
                        $c = $command
                        if ($command -and $parameter) { $c += ':' }
                        $description = $tabExpansionDescriptions["${c}${parameter}${native}"]
                        $completer = [pscustomobject]@{
                            Command     = $command
                            Parameter   = $parameter
                            Native      = $native
                            Description = $description
                            ScriptBlock = $scriptblock
                            File        = if ($scriptblock.File) { Split-Path -Leaf -Path $scriptblock.File }
                        }

                        $completer.PSTypeNames.Add('TabExpansionPlusPlus.ArgumentCompleter')
                        Write-Output $completer

                        break
                    }
                }
            }

            foreach ($pair in $tabExpansionOptions.CustomArgumentCompleters.GetEnumerator()) {
                if ($pair.Key -match '^(.*):(.*)$') {
                    $command = $matches[1]
                    $parameter = $matches[2]
                } else {
                    $parameter = $pair.Key
                    $command = ""
                }

                WriteCompleter $command $parameter $false $pair.Value
            }

            foreach ($pair in $tabExpansionOptions.NativeArgumentCompleters.GetEnumerator()) {
                WriteCompleter $pair.Key '' $true $pair.Value
            }
        }

        WriteCompleters | Sort-Object -Property Native, Command, Parameter
    }

    #############################################################################
    #
    # .SYNOPSIS
    #     Register a ScriptBlock to perform argument completion for a
    #     given command or parameter.
    #
    # .DESCRIPTION
    #
    # .PARAMETER Option
    #
    #     The name of the option.
    #
    # .PARAMETER Value
    #
    #     The value to set for Option. Typically this will be $true.
    #
    function Set-TabExpansionOption {
        param (
            [ValidateSet('ExcludeHiddenFiles',
                'RelativePaths',
                'LiteralPaths',
                'IgnoreHiddenShares',
                'AppendBackslash')]
            [string]
            $Option,

            [object]
            $Value = $true)

        $tabExpansionOptions[$option] = $value
    }

    #endregion Exported functions

    #region Internal utility functions

    #############################################################################
    #
    # This function checks if an attribute argument's name can be completed.
    # For example:
    #     [Parameter(<TAB>
    #     [Parameter(Po<TAB>
    #     [CmdletBinding(DefaultPa<TAB>
    #
    function TryAttributeArgumentCompletion {
        param (
            [System.Management.Automation.Language.Ast]
            $ast,

            [int]
            $offset
        )

        $results = @()
        $matchIndex = -1

        try {
            # We want to find any NamedAttributeArgumentAst objects where the Ast extent includes $offset
            $offsetInExtentPredicate = {
                param ($ast)
                return $offset -gt $ast.Extent.StartOffset -and
                $offset -le $ast.Extent.EndOffset
            }
            $asts = $ast.FindAll($offsetInExtentPredicate, $true)

            $attributeType = $null
            $attributeArgumentName = ""
            $replacementIndex = $offset
            $replacementLength = 0

            $attributeArg = $asts | Where-Object { $_ -is [System.Management.Automation.Language.NamedAttributeArgumentAst] } | Select-Object -First 1
            if ($null -ne $attributeArg) {
                $attributeAst = [System.Management.Automation.Language.AttributeAst]$attributeArg.Parent
                $attributeType = $attributeAst.TypeName.GetReflectionAttributeType()
                $attributeArgumentName = $attributeArg.ArgumentName
                $replacementIndex = $attributeArg.Extent.StartOffset
                $replacementLength = $attributeArg.ArgumentName.Length
            } else {
                $attributeAst = $asts | Where-Object { $_ -is [System.Management.Automation.Language.AttributeAst] } | Select-Object -First 1
                if ($null -ne $attributeAst) {
                    $attributeType = $attributeAst.TypeName.GetReflectionAttributeType()
                }
            }

            if ($null -ne $attributeType) {
                $results = $attributeType.GetProperties('Public,Instance') |
                    Where-Object {
                    # Ignore TypeId (all attributes inherit it)
                    $_.Name -like "$attributeArgumentName*" -and $_.Name -ne 'TypeId'
                } |
                    Sort-Object -Property Name |
                    ForEach-Object {
                    $propType = [Microsoft.PowerShell.ToStringCodeMethods]::Type($_.PropertyType)
                    $propName = $_.Name
                    New-CompletionResult $propName -ToolTip "$propType $propName" -CompletionResultType Property
                }

                return [PSCustomObject]@{
                    Results           = $results
                    ReplacementIndex  = $replacementIndex
                    ReplacementLength = $replacementLength
                }
            }
        } catch { }
    }

    #############################################################################
    #
    # This function completes native commands options starting with - or --
    # works around a bug in PowerShell that causes it to not complete
    # native command options starting with - or --
    #
    function TryNativeCommandOptionCompletion {
        param (
            [System.Management.Automation.Language.Ast]
            $ast,

            [int]
            $offset
        )

        $results = @()
        $replacementIndex = $offset
        $replacementLength = 0
        try {
            # We want to find any Command element objects where the Ast extent includes $offset
            $offsetInOptionExtentPredicate = {
                param ($ast)
                return $offset -gt $ast.Extent.StartOffset -and
                $offset -le $ast.Extent.EndOffset -and
                $ast.Extent.Text.StartsWith('-')
            }
            $option = $ast.Find($offsetInOptionExtentPredicate, $true)
            if ($option -ne $null) {
                $command = $option.Parent -as [System.Management.Automation.Language.CommandAst]
                if ($command -ne $null) {
                    $nativeCommand = [System.IO.Path]::GetFileNameWithoutExtension($command.CommandElements[0].Value)
                    $nativeCompleter = $tabExpansionOptions.NativeArgumentCompleters[$nativeCommand]

                    if ($nativeCompleter) {
                        $results = @(& $nativeCompleter $option.ToString() $command)
                        if ($results.Count -gt 0) {
                            $replacementIndex = $option.Extent.StartOffset
                            $replacementLength = $option.Extent.Text.Length
                        }
                    }
                }
            }
        } catch { }

        return [PSCustomObject]@{
            Results           = $results
            ReplacementIndex  = $replacementIndex
            ReplacementLength = $replacementLength
        }
    }


    #endregion Internal utility functions

    #############################################################################
    #
    # This function is partly a copy of the V3 TabExpansion2, adding a few
    # capabilities such as completing attribute arguments and excluding hidden
    # files from results.
    #
    function global:TabExpansion2 {
        [CmdletBinding(DefaultParameterSetName = 'ScriptInputSet')]
        param (
            [Parameter(ParameterSetName = 'ScriptInputSet', Mandatory, Position = 0)]
            [string]
            $inputScript,

            [Parameter(ParameterSetName = 'ScriptInputSet', Mandatory, Position = 1)]
            [int]
            $cursorColumn,

            [Parameter(ParameterSetName = 'AstInputSet', Mandatory, Position = 0)]
            [System.Management.Automation.Language.Ast]
            $ast,

            [Parameter(ParameterSetName = 'AstInputSet', Mandatory, Position = 1)]
            [System.Management.Automation.Language.Token[]]
            $tokens,

            [Parameter(ParameterSetName = 'AstInputSet', Mandatory, Position = 2)]
            [System.Management.Automation.Language.IScriptPosition]
            $positionOfCursor,

            [Parameter(ParameterSetName = 'ScriptInputSet', Position = 2)]
            [Parameter(ParameterSetName = 'AstInputSet', Position = 3)]
            [Hashtable]
            $options = $null
        )

        if ($null -ne $options) {
            $options += $tabExpansionOptions
        } else {
            $options = $tabExpansionOptions
        }

        if ($psCmdlet.ParameterSetName -eq 'ScriptInputSet') {
            $results = [System.Management.Automation.CommandCompletion]::CompleteInput(
                <#inputScript#>                $inputScript,
                <#cursorColumn#>                $cursorColumn,
                <#options#>                $options)
        } else {
            $results = [System.Management.Automation.CommandCompletion]::CompleteInput(
                <#ast#>                $ast,
                <#tokens#>                $tokens,
                <#positionOfCursor#>                $positionOfCursor,
                <#options#>                $options)
        }

        if ($results.CompletionMatches.Count -eq 0) {
            # Built-in didn't succeed, try our own completions here.
            if ($psCmdlet.ParameterSetName -eq 'ScriptInputSet') {
                $ast = [System.Management.Automation.Language.Parser]::ParseInput($inputScript, [ref]$tokens, [ref]$null)
            } else {
                $cursorColumn = $positionOfCursor.Offset
            }

            # workaround PowerShell bug that case it to not invoking native completers for - or --
            # making it hard to complete options for many commands
            $nativeCommandResults = TryNativeCommandOptionCompletion -ast $ast -offset $cursorColumn
            if ($null -ne $nativeCommandResults) {
                $results.ReplacementIndex = $nativeCommandResults.ReplacementIndex
                $results.ReplacementLength = $nativeCommandResults.ReplacementLength
                if ($results.CompletionMatches.IsReadOnly) {
                    # Workaround where PowerShell returns a readonly collection that we need to add to.
                    $collection = new-object System.Collections.ObjectModel.Collection[System.Management.Automation.CompletionResult]
                    $results.GetType().GetProperty('CompletionMatches').SetValue($results, $collection)
                }
                $nativeCommandResults.Results | ForEach-Object {
                    $results.CompletionMatches.Add($_)
                }
            }

            $attributeResults = TryAttributeArgumentCompletion $ast $cursorColumn
            if ($null -ne $attributeResults) {
                $results.ReplacementIndex = $attributeResults.ReplacementIndex
                $results.ReplacementLength = $attributeResults.ReplacementLength
                if ($results.CompletionMatches.IsReadOnly) {
                    # Workaround where PowerShell returns a readonly collection that we need to add to.
                    $collection = new-object System.Collections.ObjectModel.Collection[System.Management.Automation.CompletionResult]
                    $results.GetType().GetProperty('CompletionMatches').SetValue($results, $collection)
                }
                $attributeResults.Results | ForEach-Object {
                    $results.CompletionMatches.Add($_)
                }
            }
        }

        if ($options.ExcludeHiddenFiles) {
            foreach ($result in @($results.CompletionMatches)) {
                if ($result.ResultType -eq [System.Management.Automation.CompletionResultType]::ProviderItem -or
                    $result.ResultType -eq [System.Management.Automation.CompletionResultType]::ProviderContainer) {
                    try {
                        $item = Get-Item -LiteralPath $result.CompletionText -ErrorAction Stop
                    } catch {
                        # If Get-Item w/o -Force fails, it is probably hidden, so exclude the result
                        $null = $results.CompletionMatches.Remove($result)
                    }
                }
            }
        }
        if ($options.AppendBackslash -and
            $results.CompletionMatches.ResultType -contains [System.Management.Automation.CompletionResultType]::ProviderContainer) {
            foreach ($result in @($results.CompletionMatches)) {
                if ($result.ResultType -eq [System.Management.Automation.CompletionResultType]::ProviderContainer) {
                    $completionText = $result.CompletionText
                    $lastChar = $completionText[-1]
                    $lastIsQuote = ($lastChar -eq '"' -or $lastChar -eq "'")
                    if ($lastIsQuote) {
                        $lastChar = $completionText[-2]
                    }

                    if ($lastChar -ne '\') {
                        $null = $results.CompletionMatches.Remove($result)

                        if ($lastIsQuote) {
                            $completionText =
                            $completionText.Substring(0, $completionText.Length - 1) +
                            '\' + $completionText[-1]
                        } else {
                            $completionText = $completionText + '\'
                        }

                        $updatedResult = New-Object System.Management.Automation.CompletionResult `
                        ($completionText, $result.ListItemText, $result.ResultType, $result.ToolTip)
                        $results.CompletionMatches.Add($updatedResult)
                    }
                }
            }
        }

        if ($results.CompletionMatches.Count -eq 0) {
            # No results, if this module has overridden another TabExpansion2 function, call it
            # but only if it's not the built-in function (which we assume if function isn't
            # defined in a file.
            if ($oldTabExpansion2 -ne $null -and $oldTabExpansion2.File -ne $null) {
                return (& $oldTabExpansion2 @PSBoundParameters)
            }
        }

        return $results
    }


    #############################################################################
    #
    # Main
    #

    Add-Type @"
using System;
using System.Management.Automation;

public class NativeCommandTreeNode
{
    private NativeCommandTreeNode(NativeCommandTreeNode[] subCommands)
    {
        SubCommands = subCommands;
    }

    public NativeCommandTreeNode(string command, NativeCommandTreeNode[] subCommands)
        : this(command, null, subCommands)
    {
    }

    public NativeCommandTreeNode(string command, string tooltip, NativeCommandTreeNode[] subCommands)
        : this(subCommands)
    {
        this.Command = command;
        this.Tooltip = tooltip;
    }

    public NativeCommandTreeNode(string command, string tooltip, bool argument)
        : this(null)
    {
        this.Command = command;
        this.Tooltip = tooltip;
        this.Argument = true;
    }

    public NativeCommandTreeNode(ScriptBlock completionGenerator, NativeCommandTreeNode[] subCommands)
        : this(subCommands)
    {
        this.CompletionGenerator = completionGenerator;
    }

    public string Command { get; private set; }
    public string Tooltip { get; private set; }
    public bool Argument { get; private set; }
    public ScriptBlock CompletionGenerator { get; private set; }
    public NativeCommandTreeNode[] SubCommands { get; private set; }
}
"@

    # Custom completions are saved in this hashtable
    $tabExpansionOptions = @{
        CustomArgumentCompleters = @{ }
        NativeArgumentCompleters = @{ }
    }
    # Descriptions for the above completions saved in this hashtable
    $tabExpansionDescriptions = @{ }
    # And private data for the above completions cached in this hashtable
    $completionPrivateData = @{ }
}

tools\dbatools\PSGetModuleInfo.xml

<Objs Version="1.1.0.1" xmlns="http://schemas.microsoft.com/powershell/2004/04">
  <Obj RefId="0">
    <TN RefId="0">
      <T>Microsoft.PowerShell.Commands.PSRepositoryItemInfo</T>
      <T>System.Management.Automation.PSCustomObject</T>
      <T>System.Object</T>
    </TN>
    <MS>
      <S N="Name">dbatools</S>
      <S N="Version">0.9.711</S>
      <S N="Type">Module</S>
      <S N="Description">The community module that enables SQL Server Pros to automate database development and server administration</S>
      <S N="Author">Chrissy LeMaire</S>
      <Obj N="CompanyName" RefId="1">
        <TN RefId="1">
          <T>System.Object[]</T>
          <T>System.Array</T>
          <T>System.Object</T>
        </TN>
        <LST>
          <S>chrissylemaire</S>
          <S>FWN</S>
          <S>SQLDBAWithABeard</S>
          <S>wsmelton</S>
        </LST>
      </Obj>
      <S N="Copyright">Copyright (c) 2018 by dbatools, licensed under MIT</S>
      <DT N="PublishedDate">2018-12-07T10:36:43+00:00</DT>
      <Nil N="InstalledDate" />
      <Nil N="UpdatedDate" />
      <URI N="LicenseUri">https://opensource.org/licenses/MIT</URI>
      <URI N="ProjectUri">https://dbatools.io/</URI>
      <URI N="IconUri">https://dbatools.io/logo.png</URI>
      <Obj N="Tags" RefId="2">
        <TNRef RefId="1" />
        <LST>
          <S>sqlserver</S>
          <S>migrations</S>
          <S>sql</S>
          <S>dba</S>
          <S>databases</S>
          <S>PSModule</S>
        </LST>
      </Obj>
      <Obj N="Includes" RefId="3">
        <TN RefId="2">
          <T>System.Collections.Hashtable</T>
          <T>System.Object</T>
        </TN>
        <DCT>
          <En>
            <S N="Key">Function</S>
            <Obj N="Value" RefId="4">
              <TNRef RefId="1" />
              <LST>
                <S>Start-DbaMigration</S>
                <S>Copy-DbaDatabase</S>
                <S>Copy-DbaLogin</S>
                <S>Copy-DbaAgentServer</S>
                <S>Copy-DbaSpConfigure</S>
                <S>Copy-DbaDbMail</S>
                <S>Copy-DbaDbAssembly</S>
                <S>Copy-DbaAgentSchedule</S>
                <S>Copy-DbaAgentOperator</S>
                <S>Copy-DbaAgentJob</S>
                <S>Copy-DbaCustomError</S>
                <S>Copy-DbaServerAuditSpecification</S>
                <S>Copy-DbaEndpoint</S>
                <S>Copy-DbaServerAudit</S>
                <S>Copy-DbaServerRole</S>
                <S>Copy-DbaResourceGovernor</S>
                <S>Copy-DbaXESession</S>
                <S>Copy-DbaBackupDevice</S>
                <S>Copy-DbaServerTrigger</S>
                <S>Copy-DbaCmsRegServer</S>
                <S>Copy-DbaSysDbUserObject</S>
                <S>Copy-DbaAgentProxy</S>
                <S>Copy-DbaAgentAlert</S>
                <S>Get-DbaDetachedDatabaseInfo</S>
                <S>Restore-DbaBackupFromDirectory</S>
                <S>Copy-DbaAgentJobCategory</S>
                <S>Test-DbaPath</S>
                <S>Export-DbaLogin</S>
                <S>Watch-DbaDbLogin</S>
                <S>Expand-DbaDbLogFile</S>
                <S>Test-DbaMigrationConstraint</S>
                <S>Test-DbaNetworkLatency</S>
                <S>Find-DbaDuplicateIndex</S>
                <S>Remove-DbaDatabaseSafely</S>
                <S>Set-DbaTempdbConfig</S>
                <S>Test-DbaTempdbConfig</S>
                <S>Repair-DbaOrphanUser</S>
                <S>Remove-DbaOrphanUser</S>
                <S>Find-DbaDbUnusedIndex</S>
                <S>Get-DbaDbSpace</S>
                <S>Test-DbaDbOwner</S>
                <S>Set-DbaDbOwner</S>
                <S>Test-DbaJobOwner</S>
                <S>Set-DbaAgentJobOwner</S>
                <S>Test-DbaDbVirtualLogFile</S>
                <S>Get-DbaDbRestoreHistory</S>
                <S>Get-DbaTcpPort</S>
                <S>Test-DbaDbCompatibility</S>
                <S>Test-DbaDbCollation</S>
                <S>Test-DbaConnectionAuthScheme</S>
                <S>Test-DbaServerName</S>
                <S>Repair-DbaServerName</S>
                <S>Stop-DbaProcess</S>
                <S>Find-DbaOrphanedFile</S>
                <S>Get-DbaAvailabilityGroup</S>
                <S>Get-DbaLastGoodCheckDb</S>
                <S>Get-DbaProcess</S>
                <S>Get-DbaRunningJob</S>
                <S>Set-DbaMaxDop</S>
                <S>Test-DbaDbRecoveryModel</S>
                <S>Test-DbaMaxDop</S>
                <S>Remove-DbaBackup</S>
                <S>Get-DbaPermission</S>
                <S>Get-DbaLastBackup</S>
                <S>Connect-DbaInstance</S>
                <S>Get-DbaBackupHistory</S>
                <S>Read-DbaBackupHeader</S>
                <S>Test-DbaLastBackup</S>
                <S>Get-DbaMaxMemory</S>
                <S>Set-DbaMaxMemory</S>
                <S>Get-DbaDbSnapshot</S>
                <S>Remove-DbaDbSnapshot</S>
                <S>Get-DbaDbRoleMember</S>
                <S>Get-DbaServerRoleMember</S>
                <S>Resolve-DbaNetworkName</S>
                <S>Export-DbaAvailabilityGroup</S>
                <S>Write-DbaDataTable</S>
                <S>New-DbaDbSnapshot</S>
                <S>Restore-DbaDbSnapshot</S>
                <S>Get-DbaServerTrigger</S>
                <S>Get-DbaDbTrigger</S>
                <S>Get-DbaDbState</S>
                <S>Set-DbaDbState</S>
                <S>Get-DbaHelpIndex</S>
                <S>Get-DbaAgentAlert</S>
                <S>Get-DbaAgentOperator</S>
                <S>Get-DbaSpConfigure</S>
                <S>Rename-DbaLogin</S>
                <S>Find-DbaAgentJob</S>
                <S>Find-DbaDatabase</S>
                <S>Get-DbaXESession</S>
                <S>Test-DbaOptimizeForAdHoc</S>
                <S>Find-DbaStoredProcedure</S>
                <S>Measure-DbaBackupThroughput</S>
                <S>Get-DbaDatabase</S>
                <S>Find-DbaUserObject</S>
                <S>Get-DbaDependency</S>
                <S>Find-DbaCommand</S>
                <S>Backup-DbaDatabase</S>
                <S>New-DbaDirectory</S>
                <S>Get-DbaDbQueryStoreOption</S>
                <S>Set-DbaDbQueryStoreOption</S>
                <S>Restore-DbaDatabase</S>
                <S>Copy-DbaDbQueryStoreOption</S>
                <S>Get-DbaExecutionPlan</S>
                <S>Export-DbaExecutionPlan</S>
                <S>Set-DbaSpConfigure</S>
                <S>Test-DbaIdentityUsage</S>
                <S>Get-DbaDbAssembly</S>
                <S>Get-DbaAgentJob</S>
                <S>Get-DbaCustomError</S>
                <S>Get-DbaCredential</S>
                <S>Get-DbaBackupDevice</S>
                <S>Get-DbaAgentProxy</S>
                <S>Get-DbaDbEncryption</S>
                <S>Remove-DbaDatabase</S>
                <S>Get-DbaQueryExecutionTime</S>
                <S>Get-DbaTempdbUsage</S>
                <S>Find-DbaDbGrowthEvent</S>
                <S>Test-DbaLinkedServerConnection</S>
                <S>Get-DbaDbFile</S>
                <S>Read-DbaTransactionLog</S>
                <S>Get-DbaDbTable</S>
                <S>Invoke-DbaDbShrink</S>
                <S>Get-DbaEstimatedCompletionTime</S>
                <S>Get-DbaLinkedServer</S>
                <S>New-DbaAgentJob</S>
                <S>Get-DbaLogin</S>
                <S>New-DbaScriptingOption</S>
                <S>Save-DbaDiagnosticQueryScript</S>
                <S>Invoke-DbaDiagnosticQuery</S>
                <S>Export-DbaDiagnosticQuery</S>
                <S>Invoke-DbaWhoIsActive</S>
                <S>Set-DbaAgentJob</S>
                <S>Remove-DbaAgentJob</S>
                <S>New-DbaAgentJobStep</S>
                <S>Set-DbaAgentJobStep</S>
                <S>Remove-DbaAgentJobStep</S>
                <S>New-DbaAgentSchedule</S>
                <S>Set-DbaAgentSchedule</S>
                <S>Remove-DbaAgentSchedule</S>
                <S>Backup-DbaDbCertificate</S>
                <S>Get-DbaDbCertificate</S>
                <S>Get-DbaEndpoint</S>
                <S>Get-DbaDbMasterKey</S>
                <S>Get-DbaSchemaChangeHistory</S>
                <S>Get-DbaServerAudit</S>
                <S>Get-DbaServerAuditSpecification</S>
                <S>Get-DbaProductKey</S>
                <S>Get-DbatoolsLog</S>
                <S>Restore-DbaDbCertificate</S>
                <S>New-DbaDbCertificate</S>
                <S>New-DbaDbMasterKey</S>
                <S>New-DbaServiceMasterKey</S>
                <S>Remove-DbaDbCertificate</S>
                <S>Remove-DbaDbMasterKey</S>
                <S>New-DbaConnectionStringBuilder</S>
                <S>Get-DbaInstanceProperty</S>
                <S>Get-DbaInstanceUserOption</S>
                <S>New-DbaConnectionString</S>
                <S>Get-DbaAgentSchedule</S>
                <S>Read-DbaTraceFile</S>
                <S>Get-DbaServerInstallDate</S>
                <S>Backup-DbaDbMasterKey</S>
                <S>Get-DbaAgentJobHistory</S>
                <S>Get-DbaMaintenanceSolutionLog</S>
                <S>Invoke-DbaDbLogShipRecovery</S>
                <S>Find-DbaTrigger</S>
                <S>Find-DbaView</S>
                <S>Invoke-DbaDbUpgrade</S>
                <S>Get-DbaDbUser</S>
                <S>Get-DbaAgentLog</S>
                <S>Get-DbaDbMailLog</S>
                <S>Get-DbaDbMailHistory</S>
                <S>Get-DbaDbView</S>
                <S>Get-DbaDbUdf</S>
                <S>Get-DbaDbPartitionFunction</S>
                <S>Get-DbaDbPartitionScheme</S>
                <S>Get-DbaDefaultPath</S>
                <S>Get-DbaDbStoredProcedure</S>
                <S>Test-DbaDbCompression</S>
                <S>Mount-DbaDatabase</S>
                <S>Dismount-DbaDatabase</S>
                <S>Get-DbaAgReplica</S>
                <S>Get-DbaAgDatabase</S>
                <S>Get-DbaModule</S>
                <S>Sync-DbaLoginPermission</S>
                <S>New-DbaCredential</S>
                <S>Get-DbaFile</S>
                <S>Set-DbaDbCompression</S>
                <S>Get-DbaTraceFlag</S>
                <S>Invoke-DbaCycleErrorLog</S>
                <S>Get-DbaAvailableCollation</S>
                <S>Get-DbaUserPermission</S>
                <S>Get-DbaAgHadr</S>
                <S>Find-DbaSimilarTable</S>
                <S>Get-DbaTrace</S>
                <S>Get-DbaSuspectPage</S>
                <S>Get-DbaWaitStatistic</S>
                <S>Clear-DbaWaitStatistics</S>
                <S>Get-DbaTopResourceUsage</S>
                <S>New-DbaLogin</S>
                <S>Get-DbaAgListener</S>
                <S>Invoke-DbaDbClone</S>
                <S>Disable-DbaTraceFlag</S>
                <S>Enable-DbaTraceFlag</S>
                <S>Start-DbaAgentJob</S>
                <S>Stop-DbaAgentJob</S>
                <S>New-DbaAgentProxy</S>
                <S>Test-DbaDbLogShipStatus</S>
                <S>Get-DbaXESessionTarget</S>
                <S>New-DbaXESmartTargetResponse</S>
                <S>New-DbaXESmartTarget</S>
                <S>Get-DbaDbVirtualLogFile</S>
                <S>Get-DbaBackupInformation</S>
                <S>Start-DbaXESession</S>
                <S>Stop-DbaXESession</S>
                <S>Set-DbaDbRecoveryModel</S>
                <S>Get-DbaDbRecoveryModel</S>
                <S>Get-DbaWaitingTask</S>
                <S>Remove-DbaDbUser</S>
                <S>Get-DbaDump</S>
                <S>Invoke-DbaAdvancedRestore</S>
                <S>Format-DbaBackupInformation</S>
                <S>Get-DbaAgentJobStep</S>
                <S>Test-DbaBackupInformation</S>
                <S>Invoke-DbaBalanceDataFiles</S>
                <S>Select-DbaBackupInformation</S>
                <S>Publish-DbaDacPackage</S>
                <S>Copy-DbaDbTableData</S>
                <S>Invoke-DbaQuery</S>
                <S>Remove-DbaLogin</S>
                <S>Get-DbaAgentJobCategory</S>
                <S>New-DbaAgentJobCategory</S>
                <S>Remove-DbaAgentJobCategory</S>
                <S>Set-DbaAgentJobCategory</S>
                <S>Get-DbaDbRole</S>
                <S>Get-DbaServerRole</S>
                <S>Find-DbaBackup</S>
                <S>Remove-DbaXESession</S>
                <S>New-DbaXESession</S>
                <S>Get-DbaXEStore</S>
                <S>New-DbaXESmartTableWriter</S>
                <S>New-DbaXESmartReplay</S>
                <S>New-DbaXESmartEmail</S>
                <S>New-DbaXESmartQueryExec</S>
                <S>Start-DbaXESmartTarget</S>
                <S>Get-DbaOrphanUser</S>
                <S>Get-DbaOpenTransaction</S>
                <S>Get-DbaDbLogShipError</S>
                <S>Test-DbaBuild</S>
                <S>Get-DbaXESessionTemplate</S>
                <S>ConvertTo-DbaXESession</S>
                <S>Start-DbaTrace</S>
                <S>Stop-DbaTrace</S>
                <S>Remove-DbaTrace</S>
                <S>Set-DbaLogin</S>
                <S>Copy-DbaXESessionTemplate</S>
                <S>Get-DbaXEObject</S>
                <S>ConvertTo-DbaDataTable</S>
                <S>Find-DbaDisabledIndex</S>
                <S>Get-DbaXESmartTarget</S>
                <S>Remove-DbaXESmartTarget</S>
                <S>Stop-DbaXESmartTarget</S>
                <S>Get-DbaCmsRegServerGroup</S>
                <S>New-DbaDbUser</S>
                <S>Measure-DbaDiskSpaceRequirement</S>
                <S>New-DbaXESmartCsvWriter</S>
                <S>Invoke-DbaXeReplay</S>
                <S>Find-DbaInstance</S>
                <S>Test-DbaDiskSpeed</S>
                <S>Get-DbaDbExtentDiff</S>
                <S>Read-DbaAuditFile</S>
                <S>Get-DbaDbCompression</S>
                <S>Invoke-DbaDbDecryptObject</S>
                <S>Get-DbaDbForeignKey</S>
                <S>Get-DbaDbCheckConstraint</S>
                <S>Set-DbaAgentAlert</S>
                <S>Get-DbaWaitResource</S>
                <S>Get-DbaDbPageInfo</S>
                <S>Get-DbaConnection</S>
                <S>Test-DbaLoginPassword</S>
                <S>Get-DbaErrorLogConfig</S>
                <S>Set-DbaErrorLogConfig</S>
                <S>Get-DbaPlanCache</S>
                <S>Clear-DbaPlanCache</S>
                <S>ConvertTo-DbaTimeline</S>
                <S>Get-DbaDbMail</S>
                <S>Get-DbaDbMailAccount</S>
                <S>Get-DbaDbMailProfile</S>
                <S>Get-DbaDbMailConfig</S>
                <S>Get-DbaDbMailServer</S>
                <S>Get-DbaResourceGovernor</S>
                <S>Get-DbaRgResourcePool</S>
                <S>Get-DbaRgWorkloadGroup</S>
                <S>Get-DbaRgClassifierFunction</S>
                <S>Export-DbaInstance</S>
                <S>Invoke-DbatoolsRenameHelper</S>
                <S>Measure-DbatoolsImport</S>
                <S>Get-DbaDeprecatedFeature</S>
                <S>Test-DbaDeprecatedFeature</S>
                <S>Get-DbaDbFeatureUsage</S>
                <S>Stop-DbaEndpoint</S>
                <S>Start-DbaEndpoint</S>
                <S>Set-DbaDbMirror</S>
                <S>Repair-DbaDbMirror</S>
                <S>Remove-DbaEndpoint</S>
                <S>Remove-DbaDbMirrorMonitor</S>
                <S>Remove-DbaDbMirror</S>
                <S>New-DbaEndpoint</S>
                <S>Invoke-DbaDbMirroring</S>
                <S>Invoke-DbaDbMirrorFailover</S>
                <S>Get-DbaDbMirrorMonitor</S>
                <S>Get-DbaDbMirror</S>
                <S>Add-DbaDbMirrorMonitor</S>
                <S>Test-DbaEndpoint</S>
                <S>Get-DbaDbSharePoint</S>
                <S>Get-DbaDbMemoryUsage</S>
                <S>Clear-DbaLatchStatistics</S>
                <S>Get-DbaCpuRingBuffer</S>
                <S>Get-DbaIoLatency</S>
                <S>Get-DbaLatchStatistic</S>
                <S>Get-DbaSpinLockStatistic</S>
                <S>Add-DbaAgDatabase</S>
                <S>Add-DbaAgListener</S>
                <S>Add-DbaAgReplica</S>
                <S>Grant-DbaAgPermission</S>
                <S>Invoke-DbaAgFailover</S>
                <S>Join-DbaAvailabilityGroup</S>
                <S>New-DbaAvailabilityGroup</S>
                <S>Remove-DbaAgDatabase</S>
                <S>Remove-DbaAgListener</S>
                <S>Remove-DbaAvailabilityGroup</S>
                <S>Revoke-DbaAgPermission</S>
                <S>Get-DbaDbCompatibility</S>
                <S>Set-DbaDbCompatibility</S>
                <S>Invoke-DbatoolsFormatter</S>
                <S>Remove-DbaAgReplica</S>
                <S>Resume-DbaAgDbDataMovement</S>
                <S>Set-DbaAgListener</S>
                <S>Set-DbaAgReplica</S>
                <S>Set-DbaAvailabilityGroup</S>
                <S>Set-DbaEndpoint</S>
                <S>Suspend-DbaAgDbDataMovement</S>
                <S>Sync-DbaAvailabilityGroup</S>
                <S>Get-DbaMemoryCondition</S>
                <S>Remove-DbaDbBackupRestoreHistory</S>
                <S>New-DbaDatabase</S>
                <S>New-DbaDacOption</S>
                <S>Get-DbaDbccHelp</S>
                <S>Get-DbaDbccMemoryStatus</S>
                <S>Get-DbaDbccProcCache</S>
                <S>Get-DbaDbccUserOption</S>
                <S>Get-DbaAgentServer</S>
                <S>Set-DbaAgentServer</S>
                <S>Invoke-DbaDbccFreeCache</S>
                <S>Export-DbatoolsConfig</S>
                <S>Import-DbatoolsConfig</S>
                <S>Reset-DbatoolsConfig</S>
                <S>Unregister-DbatoolsConfig</S>
                <S>Join-DbaPath</S>
                <S>Resolve-DbaPath</S>
                <S>Export-DbaUser</S>
                <S>Get-DbaSsisExecutionHistory</S>
                <S>Get-DbaRepDistributor</S>
                <S>Get-DbaCmsRegServerStore</S>
                <S>Copy-DbaPolicyManagement</S>
                <S>Copy-DbaDataCollector</S>
                <S>Get-DbaCmsRegServer</S>
                <S>Copy-DbaSsisCatalog</S>
                <S>New-DbaSsisCatalog</S>
                <S>Get-DbaSsisEnvironmentVariable</S>
                <S>Get-DbaPbmCategory</S>
                <S>Get-DbaPbmCategorySubscription</S>
                <S>Get-DbaPbmCondition</S>
                <S>Get-DbaPbmObjectSet</S>
                <S>Get-DbaPbmPolicy</S>
                <S>Get-DbaPbmStore</S>
                <S>Add-DbaCmsRegServer</S>
                <S>Add-DbaCmsRegServerGroup</S>
                <S>Export-DbaCmsRegServer</S>
                <S>Import-DbaCmsRegServer</S>
                <S>Move-DbaCmsRegServer</S>
                <S>Move-DbaCmsRegServerGroup</S>
                <S>Remove-DbaCmsRegServer</S>
                <S>Remove-DbaCmsRegServerGroup</S>
                <S>Get-DbaRepPublication</S>
                <S>Test-DbaRepLatency</S>
                <S>Export-DbaRepServerSetting</S>
                <S>Get-DbaRepServer</S>
                <S>Install-DbaSqlWatch</S>
                <S>Uninstall-DbaSqlWatch</S>
                <S>Get-DbaRegistryRoot</S>
                <S>Install-DbaMaintenanceSolution</S>
                <S>New-DbatoolsSupportPackage</S>
                <S>Export-DbaScript</S>
                <S>Get-DbaAgentJobOutputFile</S>
                <S>Set-DbaAgentJobOutputFile</S>
                <S>Get-DbaBuildReference</S>
                <S>New-DbaDacProfile</S>
                <S>Import-DbaXESessionTemplate</S>
                <S>Export-DbaXESessionTemplate</S>
                <S>Import-DbaSpConfigure</S>
                <S>Export-DbaSpConfigure</S>
                <S>Update-Dbatools</S>
                <S>Install-DbaWhoIsActive</S>
                <S>Install-DbaFirstResponderKit</S>
                <S>Read-DbaXEFile</S>
                <S>Watch-DbaXESession</S>
                <S>Test-DbaMaxMemory</S>
                <S>Rename-DbaDatabase</S>
                <S>Update-DbaInstance</S>
                <S>Invoke-DbaPfRelog</S>
                <S>Get-DbaPfDataCollectorCounter</S>
                <S>Get-DbaPfDataCollectorCounterSample</S>
                <S>Get-DbaPfDataCollector</S>
                <S>Get-DbaPfDataCollectorSet</S>
                <S>Start-DbaPfDataCollectorSet</S>
                <S>Stop-DbaPfDataCollectorSet</S>
                <S>Export-DbaPfDataCollectorSetTemplate</S>
                <S>Get-DbaPfDataCollectorSetTemplate</S>
                <S>Import-DbaPfDataCollectorSetTemplate</S>
                <S>Remove-DbaPfDataCollectorSet</S>
                <S>Add-DbaPfDataCollectorCounter</S>
                <S>Remove-DbaPfDataCollectorCounter</S>
                <S>Get-DbaPfAvailableCounter</S>
                <S>Export-DbaXECsv</S>
                <S>Get-DbaOperatingSystem</S>
                <S>Get-DbaComputerSystem</S>
                <S>Set-DbaPrivilege</S>
                <S>Set-DbaTcpPort</S>
                <S>Set-DbaCmConnection</S>
                <S>Get-DbaUptime</S>
                <S>Get-DbaMemoryUsage</S>
                <S>Clear-DbaConnectionPool</S>
                <S>Get-DbaLocaleSetting</S>
                <S>Get-DbaFilestream</S>
                <S>Enable-DbaFilestream</S>
                <S>Disable-DbaFilestream</S>
                <S>Get-DbaCpuUsage</S>
                <S>Get-DbaPowerPlan</S>
                <S>Get-DbaWsfcAvailableDisk</S>
                <S>Get-DbaWsfcCluster</S>
                <S>Get-DbaWsfcDisk</S>
                <S>Get-DbaWsfcNetwork</S>
                <S>Get-DbaWsfcNetworkInterface</S>
                <S>Get-DbaWsfcNode</S>
                <S>Get-DbaWsfcResource</S>
                <S>Get-DbaWsfcResourceType</S>
                <S>Get-DbaWsfcRole</S>
                <S>Get-DbaWsfcSharedVolume</S>
                <S>Export-DbaCredential</S>
                <S>Export-DbaLinkedServer</S>
                <S>Get-DbaFeature</S>
                <S>Update-DbaServiceAccount</S>
                <S>Remove-DbaClientAlias</S>
                <S>Disable-DbaAgHadr</S>
                <S>Enable-DbaAgHadr</S>
                <S>Stop-DbaService</S>
                <S>Start-DbaService</S>
                <S>Restart-DbaService</S>
                <S>New-DbaClientAlias</S>
                <S>Get-DbaClientAlias</S>
                <S>Remove-DbaNetworkCertificate</S>
                <S>Enable-DbaForceNetworkEncryption</S>
                <S>Disable-DbaForceNetworkEncryption</S>
                <S>Get-DbaForceNetworkEncryption</S>
                <S>Remove-DbaComputerCertificate</S>
                <S>New-DbaComputerCertificate</S>
                <S>Get-DbaComputerCertificate</S>
                <S>Add-DbaComputerCertificate</S>
                <S>Get-DbaNetworkCertificate</S>
                <S>Set-DbaNetworkCertificate</S>
                <S>Invoke-DbaDbLogShipping</S>
                <S>New-DbaCmConnection</S>
                <S>Get-DbaCmConnection</S>
                <S>Remove-DbaCmConnection</S>
                <S>Test-DbaCmConnection</S>
                <S>Get-DbaCmObject</S>
                <S>Set-DbaStartupParameter</S>
                <S>Get-DbaNetworkActivity</S>
                <S>Get-DbaServerProtocol</S>
                <S>Watch-DbaUpdate</S>
                <S>Uninstall-DbaWatchUpdate</S>
                <S>Install-DbaWatchUpdate</S>
                <S>Get-DbaPrivilege</S>
                <S>Get-DbaMsdtc</S>
                <S>Get-DbaPageFileSetting</S>
                <S>Copy-DbaCredential</S>
                <S>Test-DbaConnection</S>
                <S>Reset-DbaAdmin</S>
                <S>Copy-DbaLinkedServer</S>
                <S>Get-DbaDiskSpace</S>
                <S>Test-DbaDiskAllocation</S>
                <S>Test-DbaPowerPlan</S>
                <S>Set-DbaPowerPlan</S>
                <S>Test-DbaDiskAlignment</S>
                <S>Get-DbaStartupParameter</S>
                <S>Get-DbaSpn</S>
                <S>Test-DbaSpn</S>
                <S>Set-DbaSpn</S>
                <S>Remove-DbaSpn</S>
                <S>Get-DbaService</S>
                <S>Get-DbaClientProtocol</S>
                <S>Get-DbaWindowsLog</S>
                <S>Show-DbaServerFileSystem</S>
                <S>Show-DbaDbList</S>
                <S>Test-DbaWindowsLogin</S>
                <S>Find-DbaLoginInGroup</S>
                <S>Import-DbaCsv</S>
                <S>Export-DbaDacPackage</S>
                <S>Get-DbatoolsConfig</S>
                <S>Get-DbatoolsConfigValue</S>
                <S>Register-DbatoolsConfig</S>
                <S>Get-DbaErrorLog</S>
                <S>Get-DbaManagementObject</S>
                <S>Test-DbaManagementObject</S>
              </LST>
            </Obj>
          </En>
          <En>
            <S N="Key">RoleCapability</S>
            <Obj N="Value" RefId="5">
              <TNRef RefId="1" />
              <LST />
            </Obj>
          </En>
          <En>
            <S N="Key">Command</S>
            <Obj N="Value" RefId="6">
              <TNRef RefId="1" />
              <LST>
                <S>Select-DbaObject</S>
                <S>Set-DbatoolsConfig</S>
                <S>Start-DbaMigration</S>
                <S>Copy-DbaDatabase</S>
                <S>Copy-DbaLogin</S>
                <S>Copy-DbaAgentServer</S>
                <S>Copy-DbaSpConfigure</S>
                <S>Copy-DbaDbMail</S>
                <S>Copy-DbaDbAssembly</S>
                <S>Copy-DbaAgentSchedule</S>
                <S>Copy-DbaAgentOperator</S>
                <S>Copy-DbaAgentJob</S>
                <S>Copy-DbaCustomError</S>
                <S>Copy-DbaServerAuditSpecification</S>
                <S>Copy-DbaEndpoint</S>
                <S>Copy-DbaServerAudit</S>
                <S>Copy-DbaServerRole</S>
                <S>Copy-DbaResourceGovernor</S>
                <S>Copy-DbaXESession</S>
                <S>Copy-DbaBackupDevice</S>
                <S>Copy-DbaServerTrigger</S>
                <S>Copy-DbaCmsRegServer</S>
                <S>Copy-DbaSysDbUserObject</S>
                <S>Copy-DbaAgentProxy</S>
                <S>Copy-DbaAgentAlert</S>
                <S>Get-DbaDetachedDatabaseInfo</S>
                <S>Restore-DbaBackupFromDirectory</S>
                <S>Copy-DbaAgentJobCategory</S>
                <S>Test-DbaPath</S>
                <S>Export-DbaLogin</S>
                <S>Watch-DbaDbLogin</S>
                <S>Expand-DbaDbLogFile</S>
                <S>Test-DbaMigrationConstraint</S>
                <S>Test-DbaNetworkLatency</S>
                <S>Find-DbaDuplicateIndex</S>
                <S>Remove-DbaDatabaseSafely</S>
                <S>Set-DbaTempdbConfig</S>
                <S>Test-DbaTempdbConfig</S>
                <S>Repair-DbaOrphanUser</S>
                <S>Remove-DbaOrphanUser</S>
                <S>Find-DbaDbUnusedIndex</S>
                <S>Get-DbaDbSpace</S>
                <S>Test-DbaDbOwner</S>
                <S>Set-DbaDbOwner</S>
                <S>Test-DbaJobOwner</S>
                <S>Set-DbaAgentJobOwner</S>
                <S>Test-DbaDbVirtualLogFile</S>
                <S>Get-DbaDbRestoreHistory</S>
                <S>Get-DbaTcpPort</S>
                <S>Test-DbaDbCompatibility</S>
                <S>Test-DbaDbCollation</S>
                <S>Test-DbaConnectionAuthScheme</S>
                <S>Test-DbaServerName</S>
                <S>Repair-DbaServerName</S>
                <S>Stop-DbaProcess</S>
                <S>Find-DbaOrphanedFile</S>
                <S>Get-DbaAvailabilityGroup</S>
                <S>Get-DbaLastGoodCheckDb</S>
                <S>Get-DbaProcess</S>
                <S>Get-DbaRunningJob</S>
                <S>Set-DbaMaxDop</S>
                <S>Test-DbaDbRecoveryModel</S>
                <S>Test-DbaMaxDop</S>
                <S>Remove-DbaBackup</S>
                <S>Get-DbaPermission</S>
                <S>Get-DbaLastBackup</S>
                <S>Connect-DbaInstance</S>
                <S>Get-DbaBackupHistory</S>
                <S>Read-DbaBackupHeader</S>
                <S>Test-DbaLastBackup</S>
                <S>Get-DbaMaxMemory</S>
                <S>Set-DbaMaxMemory</S>
                <S>Get-DbaDbSnapshot</S>
                <S>Remove-DbaDbSnapshot</S>
                <S>Get-DbaDbRoleMember</S>
                <S>Get-DbaServerRoleMember</S>
                <S>Resolve-DbaNetworkName</S>
                <S>Export-DbaAvailabilityGroup</S>
                <S>Write-DbaDataTable</S>
                <S>New-DbaDbSnapshot</S>
                <S>Restore-DbaDbSnapshot</S>
                <S>Get-DbaServerTrigger</S>
                <S>Get-DbaDbTrigger</S>
                <S>Get-DbaDbState</S>
                <S>Set-DbaDbState</S>
                <S>Get-DbaHelpIndex</S>
                <S>Get-DbaAgentAlert</S>
                <S>Get-DbaAgentOperator</S>
                <S>Get-DbaSpConfigure</S>
                <S>Rename-DbaLogin</S>
                <S>Find-DbaAgentJob</S>
                <S>Find-DbaDatabase</S>
                <S>Get-DbaXESession</S>
                <S>Test-DbaOptimizeForAdHoc</S>
                <S>Find-DbaStoredProcedure</S>
                <S>Measure-DbaBackupThroughput</S>
                <S>Get-DbaDatabase</S>
                <S>Find-DbaUserObject</S>
                <S>Get-DbaDependency</S>
                <S>Find-DbaCommand</S>
                <S>Backup-DbaDatabase</S>
                <S>New-DbaDirectory</S>
                <S>Get-DbaDbQueryStoreOption</S>
                <S>Set-DbaDbQueryStoreOption</S>
                <S>Restore-DbaDatabase</S>
                <S>Copy-DbaDbQueryStoreOption</S>
                <S>Get-DbaExecutionPlan</S>
                <S>Export-DbaExecutionPlan</S>
                <S>Set-DbaSpConfigure</S>
                <S>Test-DbaIdentityUsage</S>
                <S>Get-DbaDbAssembly</S>
                <S>Get-DbaAgentJob</S>
                <S>Get-DbaCustomError</S>
                <S>Get-DbaCredential</S>
                <S>Get-DbaBackupDevice</S>
                <S>Get-DbaAgentProxy</S>
                <S>Get-DbaDbEncryption</S>
                <S>Remove-DbaDatabase</S>
                <S>Get-DbaQueryExecutionTime</S>
                <S>Get-DbaTempdbUsage</S>
                <S>Find-DbaDbGrowthEvent</S>
                <S>Test-DbaLinkedServerConnection</S>
                <S>Get-DbaDbFile</S>
                <S>Read-DbaTransactionLog</S>
                <S>Get-DbaDbTable</S>
                <S>Invoke-DbaDbShrink</S>
                <S>Get-DbaEstimatedCompletionTime</S>
                <S>Get-DbaLinkedServer</S>
                <S>New-DbaAgentJob</S>
                <S>Get-DbaLogin</S>
                <S>New-DbaScriptingOption</S>
                <S>Save-DbaDiagnosticQueryScript</S>
                <S>Invoke-DbaDiagnosticQuery</S>
                <S>Export-DbaDiagnosticQuery</S>
                <S>Invoke-DbaWhoIsActive</S>
                <S>Set-DbaAgentJob</S>
                <S>Remove-DbaAgentJob</S>
                <S>New-DbaAgentJobStep</S>
                <S>Set-DbaAgentJobStep</S>
                <S>Remove-DbaAgentJobStep</S>
                <S>New-DbaAgentSchedule</S>
                <S>Set-DbaAgentSchedule</S>
                <S>Remove-DbaAgentSchedule</S>
                <S>Backup-DbaDbCertificate</S>
                <S>Get-DbaDbCertificate</S>
                <S>Get-DbaEndpoint</S>
                <S>Get-DbaDbMasterKey</S>
                <S>Get-DbaSchemaChangeHistory</S>
                <S>Get-DbaServerAudit</S>
                <S>Get-DbaServerAuditSpecification</S>
                <S>Get-DbaProductKey</S>
                <S>Get-DbatoolsLog</S>
                <S>Restore-DbaDbCertificate</S>
                <S>New-DbaDbCertificate</S>
                <S>New-DbaDbMasterKey</S>
                <S>New-DbaServiceMasterKey</S>
                <S>Remove-DbaDbCertificate</S>
                <S>Remove-DbaDbMasterKey</S>
                <S>New-DbaConnectionStringBuilder</S>
                <S>Get-DbaInstanceProperty</S>
                <S>Get-DbaInstanceUserOption</S>
                <S>New-DbaConnectionString</S>
                <S>Get-DbaAgentSchedule</S>
                <S>Read-DbaTraceFile</S>
                <S>Get-DbaServerInstallDate</S>
                <S>Backup-DbaDbMasterKey</S>
                <S>Get-DbaAgentJobHistory</S>
                <S>Get-DbaMaintenanceSolutionLog</S>
                <S>Invoke-DbaDbLogShipRecovery</S>
                <S>Find-DbaTrigger</S>
                <S>Find-DbaView</S>
                <S>Invoke-DbaDbUpgrade</S>
                <S>Get-DbaDbUser</S>
                <S>Get-DbaAgentLog</S>
                <S>Get-DbaDbMailLog</S>
                <S>Get-DbaDbMailHistory</S>
                <S>Get-DbaDbView</S>
                <S>Get-DbaDbUdf</S>
                <S>Get-DbaDbPartitionFunction</S>
                <S>Get-DbaDbPartitionScheme</S>
                <S>Get-DbaDefaultPath</S>
                <S>Get-DbaDbStoredProcedure</S>
                <S>Test-DbaDbCompression</S>
                <S>Mount-DbaDatabase</S>
                <S>Dismount-DbaDatabase</S>
                <S>Get-DbaAgReplica</S>
                <S>Get-DbaAgDatabase</S>
                <S>Get-DbaModule</S>
                <S>Sync-DbaLoginPermission</S>
                <S>New-DbaCredential</S>
                <S>Get-DbaFile</S>
                <S>Set-DbaDbCompression</S>
                <S>Get-DbaTraceFlag</S>
                <S>Invoke-DbaCycleErrorLog</S>
                <S>Get-DbaAvailableCollation</S>
                <S>Get-DbaUserPermission</S>
                <S>Get-DbaAgHadr</S>
                <S>Find-DbaSimilarTable</S>
                <S>Get-DbaTrace</S>
                <S>Get-DbaSuspectPage</S>
                <S>Get-DbaWaitStatistic</S>
                <S>Clear-DbaWaitStatistics</S>
                <S>Get-DbaTopResourceUsage</S>
                <S>New-DbaLogin</S>
                <S>Get-DbaAgListener</S>
                <S>Invoke-DbaDbClone</S>
                <S>Disable-DbaTraceFlag</S>
                <S>Enable-DbaTraceFlag</S>
                <S>Start-DbaAgentJob</S>
                <S>Stop-DbaAgentJob</S>
                <S>New-DbaAgentProxy</S>
                <S>Test-DbaDbLogShipStatus</S>
                <S>Get-DbaXESessionTarget</S>
                <S>New-DbaXESmartTargetResponse</S>
                <S>New-DbaXESmartTarget</S>
                <S>Get-DbaDbVirtualLogFile</S>
                <S>Get-DbaBackupInformation</S>
                <S>Start-DbaXESession</S>
                <S>Stop-DbaXESession</S>
                <S>Set-DbaDbRecoveryModel</S>
                <S>Get-DbaDbRecoveryModel</S>
                <S>Get-DbaWaitingTask</S>
                <S>Remove-DbaDbUser</S>
                <S>Get-DbaDump</S>
                <S>Invoke-DbaAdvancedRestore</S>
                <S>Format-DbaBackupInformation</S>
                <S>Get-DbaAgentJobStep</S>
                <S>Test-DbaBackupInformation</S>
                <S>Invoke-DbaBalanceDataFiles</S>
                <S>Select-DbaBackupInformation</S>
                <S>Publish-DbaDacPackage</S>
                <S>Copy-DbaDbTableData</S>
                <S>Invoke-DbaQuery</S>
                <S>Remove-DbaLogin</S>
                <S>Get-DbaAgentJobCategory</S>
                <S>New-DbaAgentJobCategory</S>
                <S>Remove-DbaAgentJobCategory</S>
                <S>Set-DbaAgentJobCategory</S>
                <S>Get-DbaDbRole</S>
                <S>Get-DbaServerRole</S>
                <S>Find-DbaBackup</S>
                <S>Remove-DbaXESession</S>
                <S>New-DbaXESession</S>
                <S>Get-DbaXEStore</S>
                <S>New-DbaXESmartTableWriter</S>
                <S>New-DbaXESmartReplay</S>
                <S>New-DbaXESmartEmail</S>
                <S>New-DbaXESmartQueryExec</S>
                <S>Start-DbaXESmartTarget</S>
                <S>Get-DbaOrphanUser</S>
                <S>Get-DbaOpenTransaction</S>
                <S>Get-DbaDbLogShipError</S>
                <S>Test-DbaBuild</S>
                <S>Get-DbaXESessionTemplate</S>
                <S>ConvertTo-DbaXESession</S>
                <S>Start-DbaTrace</S>
                <S>Stop-DbaTrace</S>
                <S>Remove-DbaTrace</S>
                <S>Set-DbaLogin</S>
                <S>Copy-DbaXESessionTemplate</S>
                <S>Get-DbaXEObject</S>
                <S>ConvertTo-DbaDataTable</S>
                <S>Find-DbaDisabledIndex</S>
                <S>Get-DbaXESmartTarget</S>
                <S>Remove-DbaXESmartTarget</S>
                <S>Stop-DbaXESmartTarget</S>
                <S>Get-DbaCmsRegServerGroup</S>
                <S>New-DbaDbUser</S>
                <S>Measure-DbaDiskSpaceRequirement</S>
                <S>New-DbaXESmartCsvWriter</S>
                <S>Invoke-DbaXeReplay</S>
                <S>Find-DbaInstance</S>
                <S>Test-DbaDiskSpeed</S>
                <S>Get-DbaDbExtentDiff</S>
                <S>Read-DbaAuditFile</S>
                <S>Get-DbaDbCompression</S>
                <S>Invoke-DbaDbDecryptObject</S>
                <S>Get-DbaDbForeignKey</S>
                <S>Get-DbaDbCheckConstraint</S>
                <S>Set-DbaAgentAlert</S>
                <S>Get-DbaWaitResource</S>
                <S>Get-DbaDbPageInfo</S>
                <S>Get-DbaConnection</S>
                <S>Test-DbaLoginPassword</S>
                <S>Get-DbaErrorLogConfig</S>
                <S>Set-DbaErrorLogConfig</S>
                <S>Get-DbaPlanCache</S>
                <S>Clear-DbaPlanCache</S>
                <S>ConvertTo-DbaTimeline</S>
                <S>Get-DbaDbMail</S>
                <S>Get-DbaDbMailAccount</S>
                <S>Get-DbaDbMailProfile</S>
                <S>Get-DbaDbMailConfig</S>
                <S>Get-DbaDbMailServer</S>
                <S>Get-DbaResourceGovernor</S>
                <S>Get-DbaRgResourcePool</S>
                <S>Get-DbaRgWorkloadGroup</S>
                <S>Get-DbaRgClassifierFunction</S>
                <S>Export-DbaInstance</S>
                <S>Invoke-DbatoolsRenameHelper</S>
                <S>Measure-DbatoolsImport</S>
                <S>Get-DbaDeprecatedFeature</S>
                <S>Test-DbaDeprecatedFeature</S>
                <S>Get-DbaDbFeatureUsage</S>
                <S>Stop-DbaEndpoint</S>
                <S>Start-DbaEndpoint</S>
                <S>Set-DbaDbMirror</S>
                <S>Repair-DbaDbMirror</S>
                <S>Remove-DbaEndpoint</S>
                <S>Remove-DbaDbMirrorMonitor</S>
                <S>Remove-DbaDbMirror</S>
                <S>New-DbaEndpoint</S>
                <S>Invoke-DbaDbMirroring</S>
                <S>Invoke-DbaDbMirrorFailover</S>
                <S>Get-DbaDbMirrorMonitor</S>
                <S>Get-DbaDbMirror</S>
                <S>Add-DbaDbMirrorMonitor</S>
                <S>Test-DbaEndpoint</S>
                <S>Get-DbaDbSharePoint</S>
                <S>Get-DbaDbMemoryUsage</S>
                <S>Clear-DbaLatchStatistics</S>
                <S>Get-DbaCpuRingBuffer</S>
                <S>Get-DbaIoLatency</S>
                <S>Get-DbaLatchStatistic</S>
                <S>Get-DbaSpinLockStatistic</S>
                <S>Add-DbaAgDatabase</S>
                <S>Add-DbaAgListener</S>
                <S>Add-DbaAgReplica</S>
                <S>Grant-DbaAgPermission</S>
                <S>Invoke-DbaAgFailover</S>
                <S>Join-DbaAvailabilityGroup</S>
                <S>New-DbaAvailabilityGroup</S>
                <S>Remove-DbaAgDatabase</S>
                <S>Remove-DbaAgListener</S>
                <S>Remove-DbaAvailabilityGroup</S>
                <S>Revoke-DbaAgPermission</S>
                <S>Get-DbaDbCompatibility</S>
                <S>Set-DbaDbCompatibility</S>
                <S>Invoke-DbatoolsFormatter</S>
                <S>Remove-DbaAgReplica</S>
                <S>Resume-DbaAgDbDataMovement</S>
                <S>Set-DbaAgListener</S>
                <S>Set-DbaAgReplica</S>
                <S>Set-DbaAvailabilityGroup</S>
                <S>Set-DbaEndpoint</S>
                <S>Suspend-DbaAgDbDataMovement</S>
                <S>Sync-DbaAvailabilityGroup</S>
                <S>Get-DbaMemoryCondition</S>
                <S>Remove-DbaDbBackupRestoreHistory</S>
                <S>New-DbaDatabase</S>
                <S>New-DbaDacOption</S>
                <S>Get-DbaDbccHelp</S>
                <S>Get-DbaDbccMemoryStatus</S>
                <S>Get-DbaDbccProcCache</S>
                <S>Get-DbaDbccUserOption</S>
                <S>Get-DbaAgentServer</S>
                <S>Set-DbaAgentServer</S>
                <S>Invoke-DbaDbccFreeCache</S>
                <S>Export-DbatoolsConfig</S>
                <S>Import-DbatoolsConfig</S>
                <S>Reset-DbatoolsConfig</S>
                <S>Unregister-DbatoolsConfig</S>
                <S>Join-DbaPath</S>
                <S>Resolve-DbaPath</S>
                <S>Export-DbaUser</S>
                <S>Get-DbaSsisExecutionHistory</S>
                <S>Get-DbaRepDistributor</S>
                <S>Get-DbaCmsRegServerStore</S>
                <S>Copy-DbaPolicyManagement</S>
                <S>Copy-DbaDataCollector</S>
                <S>Get-DbaCmsRegServer</S>
                <S>Copy-DbaSsisCatalog</S>
                <S>New-DbaSsisCatalog</S>
                <S>Get-DbaSsisEnvironmentVariable</S>
                <S>Get-DbaPbmCategory</S>
                <S>Get-DbaPbmCategorySubscription</S>
                <S>Get-DbaPbmCondition</S>
                <S>Get-DbaPbmObjectSet</S>
                <S>Get-DbaPbmPolicy</S>
                <S>Get-DbaPbmStore</S>
                <S>Add-DbaCmsRegServer</S>
                <S>Add-DbaCmsRegServerGroup</S>
                <S>Export-DbaCmsRegServer</S>
                <S>Import-DbaCmsRegServer</S>
                <S>Move-DbaCmsRegServer</S>
                <S>Move-DbaCmsRegServerGroup</S>
                <S>Remove-DbaCmsRegServer</S>
                <S>Remove-DbaCmsRegServerGroup</S>
                <S>Get-DbaRepPublication</S>
                <S>Test-DbaRepLatency</S>
                <S>Export-DbaRepServerSetting</S>
                <S>Get-DbaRepServer</S>
                <S>Install-DbaSqlWatch</S>
                <S>Uninstall-DbaSqlWatch</S>
                <S>Get-DbaRegistryRoot</S>
                <S>Install-DbaMaintenanceSolution</S>
                <S>New-DbatoolsSupportPackage</S>
                <S>Export-DbaScript</S>
                <S>Get-DbaAgentJobOutputFile</S>
                <S>Set-DbaAgentJobOutputFile</S>
                <S>Get-DbaBuildReference</S>
                <S>New-DbaDacProfile</S>
                <S>Import-DbaXESessionTemplate</S>
                <S>Export-DbaXESessionTemplate</S>
                <S>Import-DbaSpConfigure</S>
                <S>Export-DbaSpConfigure</S>
                <S>Update-Dbatools</S>
                <S>Install-DbaWhoIsActive</S>
                <S>Install-DbaFirstResponderKit</S>
                <S>Read-DbaXEFile</S>
                <S>Watch-DbaXESession</S>
                <S>Test-DbaMaxMemory</S>
                <S>Rename-DbaDatabase</S>
                <S>Update-DbaInstance</S>
                <S>Invoke-DbaPfRelog</S>
                <S>Get-DbaPfDataCollectorCounter</S>
                <S>Get-DbaPfDataCollectorCounterSample</S>
                <S>Get-DbaPfDataCollector</S>
                <S>Get-DbaPfDataCollectorSet</S>
                <S>Start-DbaPfDataCollectorSet</S>
                <S>Stop-DbaPfDataCollectorSet</S>
                <S>Export-DbaPfDataCollectorSetTemplate</S>
                <S>Get-DbaPfDataCollectorSetTemplate</S>
                <S>Import-DbaPfDataCollectorSetTemplate</S>
                <S>Remove-DbaPfDataCollectorSet</S>
                <S>Add-DbaPfDataCollectorCounter</S>
                <S>Remove-DbaPfDataCollectorCounter</S>
                <S>Get-DbaPfAvailableCounter</S>
                <S>Export-DbaXECsv</S>
                <S>Get-DbaOperatingSystem</S>
                <S>Get-DbaComputerSystem</S>
                <S>Set-DbaPrivilege</S>
                <S>Set-DbaTcpPort</S>
                <S>Set-DbaCmConnection</S>
                <S>Get-DbaUptime</S>
                <S>Get-DbaMemoryUsage</S>
                <S>Clear-DbaConnectionPool</S>
                <S>Get-DbaLocaleSetting</S>
                <S>Get-DbaFilestream</S>
                <S>Enable-DbaFilestream</S>
                <S>Disable-DbaFilestream</S>
                <S>Get-DbaCpuUsage</S>
                <S>Get-DbaPowerPlan</S>
                <S>Get-DbaWsfcAvailableDisk</S>
                <S>Get-DbaWsfcCluster</S>
                <S>Get-DbaWsfcDisk</S>
                <S>Get-DbaWsfcNetwork</S>
                <S>Get-DbaWsfcNetworkInterface</S>
                <S>Get-DbaWsfcNode</S>
                <S>Get-DbaWsfcResource</S>
                <S>Get-DbaWsfcResourceType</S>
                <S>Get-DbaWsfcRole</S>
                <S>Get-DbaWsfcSharedVolume</S>
                <S>Export-DbaCredential</S>
                <S>Export-DbaLinkedServer</S>
                <S>Get-DbaFeature</S>
                <S>Update-DbaServiceAccount</S>
                <S>Remove-DbaClientAlias</S>
                <S>Disable-DbaAgHadr</S>
                <S>Enable-DbaAgHadr</S>
                <S>Stop-DbaService</S>
                <S>Start-DbaService</S>
                <S>Restart-DbaService</S>
                <S>New-DbaClientAlias</S>
                <S>Get-DbaClientAlias</S>
                <S>Remove-DbaNetworkCertificate</S>
                <S>Enable-DbaForceNetworkEncryption</S>
                <S>Disable-DbaForceNetworkEncryption</S>
                <S>Get-DbaForceNetworkEncryption</S>
                <S>Remove-DbaComputerCertificate</S>
                <S>New-DbaComputerCertificate</S>
                <S>Get-DbaComputerCertificate</S>
                <S>Add-DbaComputerCertificate</S>
                <S>Get-DbaNetworkCertificate</S>
                <S>Set-DbaNetworkCertificate</S>
                <S>Invoke-DbaDbLogShipping</S>
                <S>New-DbaCmConnection</S>
                <S>Get-DbaCmConnection</S>
                <S>Remove-DbaCmConnection</S>
                <S>Test-DbaCmConnection</S>
                <S>Get-DbaCmObject</S>
                <S>Set-DbaStartupParameter</S>
                <S>Get-DbaNetworkActivity</S>
                <S>Get-DbaServerProtocol</S>
                <S>Watch-DbaUpdate</S>
                <S>Uninstall-DbaWatchUpdate</S>
                <S>Install-DbaWatchUpdate</S>
                <S>Get-DbaPrivilege</S>
                <S>Get-DbaMsdtc</S>
                <S>Get-DbaPageFileSetting</S>
                <S>Copy-DbaCredential</S>
                <S>Test-DbaConnection</S>
                <S>Reset-DbaAdmin</S>
                <S>Copy-DbaLinkedServer</S>
                <S>Get-DbaDiskSpace</S>
                <S>Test-DbaDiskAllocation</S>
                <S>Test-DbaPowerPlan</S>
                <S>Set-DbaPowerPlan</S>
                <S>Test-DbaDiskAlignment</S>
                <S>Get-DbaStartupParameter</S>
                <S>Get-DbaSpn</S>
                <S>Test-DbaSpn</S>
                <S>Set-DbaSpn</S>
                <S>Remove-DbaSpn</S>
                <S>Get-DbaService</S>
                <S>Get-DbaClientProtocol</S>
                <S>Get-DbaWindowsLog</S>
                <S>Show-DbaServerFileSystem</S>
                <S>Show-DbaDbList</S>
                <S>Test-DbaWindowsLogin</S>
                <S>Find-DbaLoginInGroup</S>
                <S>Import-DbaCsv</S>
                <S>Export-DbaDacPackage</S>
                <S>Get-DbatoolsConfig</S>
                <S>Get-DbatoolsConfigValue</S>
                <S>Register-DbatoolsConfig</S>
                <S>Get-DbaErrorLog</S>
                <S>Get-DbaManagementObject</S>
                <S>Test-DbaManagementObject</S>
              </LST>
            </Obj>
          </En>
          <En>
            <S N="Key">DscResource</S>
            <Obj N="Value" RefId="7">
              <TNRef RefId="1" />
              <LST />
            </Obj>
          </En>
          <En>
            <S N="Key">Workflow</S>
            <Obj N="Value" RefId="8">
              <TNRef RefId="1" />
              <LST />
            </Obj>
          </En>
          <En>
            <S N="Key">Cmdlet</S>
            <Obj N="Value" RefId="9">
              <TNRef RefId="1" />
              <LST>
                <S>Select-DbaObject</S>
                <S>Set-DbatoolsConfig</S>
              </LST>
            </Obj>
          </En>
        </DCT>
      </Obj>
      <Nil N="PowerShellGetFormatVersion" />
      <S N="ReleaseNotes">https://dbatools.io/changelog</S>
      <Obj N="Dependencies" RefId="10">
        <TNRef RefId="1" />
        <LST />
      </Obj>
      <S N="RepositorySourceLocation">https://www.powershellgallery.com/api/v2/</S>
      <S N="Repository">PSGallery</S>
      <S N="PackageManagementProvider">NuGet</S>
      <Obj N="AdditionalMetadata" RefId="11">
        <TN RefId="3">
          <T>System.Management.Automation.PSCustomObject</T>
          <T>System.Object</T>
        </TN>
        <MS>
          <S N="copyright">Copyright (c) 2018 by dbatools, licensed under MIT</S>
          <S N="description">The community module that enables SQL Server Pros to automate database development and server administration</S>
          <S N="requireLicenseAcceptance">True</S>
          <S N="releaseNotes">https://dbatools.io/changelog</S>
          <S N="isLatestVersion">True</S>
          <S N="isAbsoluteLatestVersion">True</S>
          <S N="versionDownloadCount">38</S>
          <S N="downloadCount">103995</S>
          <S N="packageSize">21057745</S>
          <S N="published">12/7/2018 10:36:43 AM +00:00</S>
          <S N="created">12/7/2018 10:36:43 AM +00:00</S>
          <S N="lastUpdated">12/7/2018 12:06:29 PM +00:00</S>
          <S N="tags">sqlserver migrations sql dba databases PSModule PSCmdlet_Select-DbaObject PSCommand_Select-DbaObject PSCmdlet_Set-DbatoolsConfig PSCommand_Set-DbatoolsConfig PSIncludes_Cmdlet PSFunction_Start-DbaMigration PSCommand_Start-DbaMigration PSFunction_Copy-DbaDatabase PSCommand_Copy-DbaDatabase PSFunction_Copy-DbaLogin PSCommand_Copy-DbaLogin PSFunction_Copy-DbaAgentServer PSCommand_Copy-DbaAgentServer PSFunction_Copy-DbaSpConfigure PSCommand_Copy-DbaSpConfigure PSFunction_Copy-DbaDbMail PSCommand_Copy-DbaDbMail PSFunction_Copy-DbaDbAssembly PSCommand_Copy-DbaDbAssembly PSFunction_Copy-DbaAgentSchedule PSCommand_Copy-DbaAgentSchedule PSFunction_Copy-DbaAgentOperator PSCommand_Copy-DbaAgentOperator PSFunction_Copy-DbaAgentJob PSCommand_Copy-DbaAgentJob PSFunction_Copy-DbaCustomError PSCommand_Copy-DbaCustomError PSFunction_Copy-DbaServerAuditSpecification PSCommand_Copy-DbaServerAuditSpecification PSFunction_Copy-DbaEndpoint PSCommand_Copy-DbaEndpoint PSFunction_Copy-DbaServerAudit PSCommand_Copy-DbaServerAudit PSFunction_Copy-DbaServerRole PSCommand_Copy-DbaServerRole PSFunction_Copy-DbaResourceGovernor PSCommand_Copy-DbaResourceGovernor PSFunction_Copy-DbaXESession PSCommand_Copy-DbaXESession PSFunction_Copy-DbaBackupDevice PSCommand_Copy-DbaBackupDevice PSFunction_Copy-DbaServerTrigger PSCommand_Copy-DbaServerTrigger PSFunction_Copy-DbaCmsRegServer PSCommand_Copy-DbaCmsRegServer PSFunction_Copy-DbaSysDbUserObject PSCommand_Copy-DbaSysDbUserObject PSFunction_Copy-DbaAgentProxy PSCommand_Copy-DbaAgentProxy PSFunction_Copy-DbaAgentAlert PSCommand_Copy-DbaAgentAlert PSFunction_Get-DbaDetachedDatabaseInfo PSCommand_Get-DbaDetachedDatabaseInfo PSFunction_Restore-DbaBackupFromDirectory PSCommand_Restore-DbaBackupFromDirectory PSFunction_Copy-DbaAgentJobCategory PSCommand_Copy-DbaAgentJobCategory PSFunction_Test-DbaPath PSCommand_Test-DbaPath PSFunction_Export-DbaLogin PSCommand_Export-DbaLogin PSFunction_Watch-DbaDbLogin PSCommand_Watch-DbaDbLogin PSFunction_Expand-DbaDbLogFile PSCommand_Expand-DbaDbLogFile PSFunction_Test-DbaMigrationConstraint PSCommand_Test-DbaMigrationConstraint PSFunction_Test-DbaNetworkLatency PSCommand_Test-DbaNetworkLatency PSFunction_Find-DbaDuplicateIndex PSCommand_Find-DbaDuplicateIndex PSFunction_Remove-DbaDatabaseSafely PSCommand_Remove-DbaDatabaseSafely PSFunction_Set-DbaTempdbConfig PSCommand_Set-DbaTempdbConfig PSFunction_Test-DbaTempdbConfig PSCommand_Test-DbaTempdbConfig PSFunction_Repair-DbaOrphanUser PSCommand_Repair-DbaOrphanUser PSFunction_Remove-DbaOrphanUser PSCommand_Remove-DbaOrphanUser PSFunction_Find-DbaDbUnusedIndex PSCommand_Find-DbaDbUnusedIndex PSFunction_Get-DbaDbSpace PSCommand_Get-DbaDbSpace PSFunction_Test-DbaDbOwner PSCommand_Test-DbaDbOwner PSFunction_Set-DbaDbOwner PSCommand_Set-DbaDbOwner PSFunction_Test-DbaJobOwner PSCommand_Test-DbaJobOwner PSFunction_Set-DbaAgentJobOwner PSCommand_Set-DbaAgentJobOwner PSFunction_Test-DbaDbVirtualLogFile PSCommand_Test-DbaDbVirtualLogFile PSFunction_Get-DbaDbRestoreHistory PSCommand_Get-DbaDbRestoreHistory PSFunction_Get-DbaTcpPort PSCommand_Get-DbaTcpPort PSFunction_Test-DbaDbCompatibility PSCommand_Test-DbaDbCompatibility PSFunction_Test-DbaDbCollation PSCommand_Test-DbaDbCollation PSFunction_Test-DbaConnectionAuthScheme PSCommand_Test-DbaConnectionAuthScheme PSFunction_Test-DbaServerName PSCommand_Test-DbaServerName PSFunction_Repair-DbaServerName PSCommand_Repair-DbaServerName PSFunction_Stop-DbaProcess PSCommand_Stop-DbaProcess PSFunction_Find-DbaOrphanedFile PSCommand_Find-DbaOrphanedFile PSFunction_Get-DbaAvailabilityGroup PSCommand_Get-DbaAvailabilityGroup PSFunction_Get-DbaLastGoodCheckDb PSCommand_Get-DbaLastGoodCheckDb PSFunction_Get-DbaProcess PSCommand_Get-DbaProcess PSFunction_Get-DbaRunningJob PSCommand_Get-DbaRunningJob PSFunction_Set-DbaMaxDop PSCommand_Set-DbaMaxDop PSFunction_Test-DbaDbRecoveryModel PSCommand_Test-DbaDbRecoveryModel PSFunction_Test-DbaMaxDop PSCommand_Test-DbaMaxDop PSFunction_Remove-DbaBackup PSCommand_Remove-DbaBackup PSFunction_Get-DbaPermission PSCommand_Get-DbaPermission PSFunction_Get-DbaLastBackup PSCommand_Get-DbaLastBackup PSFunction_Connect-DbaInstance PSCommand_Connect-DbaInstance PSFunction_Get-DbaBackupHistory PSCommand_Get-DbaBackupHistory PSFunction_Read-DbaBackupHeader PSCommand_Read-DbaBackupHeader PSFunction_Test-DbaLastBackup PSCommand_Test-DbaLastBackup PSFunction_Get-DbaMaxMemory PSCommand_Get-DbaMaxMemory PSFunction_Set-DbaMaxMemory PSCommand_Set-DbaMaxMemory PSFunction_Get-DbaDbSnapshot PSCommand_Get-DbaDbSnapshot PSFunction_Remove-DbaDbSnapshot PSCommand_Remove-DbaDbSnapshot PSFunction_Get-DbaDbRoleMember PSCommand_Get-DbaDbRoleMember PSFunction_Get-DbaServerRoleMember PSCommand_Get-DbaServerRoleMember PSFunction_Resolve-DbaNetworkName PSCommand_Resolve-DbaNetworkName PSFunction_Export-DbaAvailabilityGroup PSCommand_Export-DbaAvailabilityGroup PSFunction_Write-DbaDataTable PSCommand_Write-DbaDataTable PSFunction_New-DbaDbSnapshot PSCommand_New-DbaDbSnapshot PSFunction_Restore-DbaDbSnapshot PSCommand_Restore-DbaDbSnapshot PSFunction_Get-DbaServerTrigger PSCommand_Get-DbaServerTrigger PSFunction_Get-DbaDbTrigger PSCommand_Get-DbaDbTrigger PSFunction_Get-DbaDbState PSCommand_Get-DbaDbState PSFunction_Set-DbaDbState PSCommand_Set-DbaDbState PSFunction_Get-DbaHelpIndex PSCommand_Get-DbaHelpIndex PSFunction_Get-DbaAgentAlert PSCommand_Get-DbaAgentAlert PSFunction_Get-DbaAgentOperator PSCommand_Get-DbaAgentOperator PSFunction_Get-DbaSpConfigure PSCommand_Get-DbaSpConfigure PSFunction_Rename-DbaLogin PSCommand_Rename-DbaLogin PSFunction_Find-DbaAgentJob PSCommand_Find-DbaAgentJob PSFunction_Find-DbaDatabase PSCommand_Find-DbaDatabase PSFunction_Get-DbaXESession PSCommand_Get-DbaXESession PSFunction_Test-DbaOptimizeForAdHoc PSCommand_Test-DbaOptimizeForAdHoc PSFunction_Find-DbaStoredProcedure PSCommand_Find-DbaStoredProcedure PSFunction_Measure-DbaBackupThroughput PSCommand_Measure-DbaBackupThroughput PSFunction_Get-DbaDatabase PSCommand_Get-DbaDatabase PSFunction_Find-DbaUserObject PSCommand_Find-DbaUserObject PSFunction_Get-DbaDependency PSCommand_Get-DbaDependency PSFunction_Find-DbaCommand PSCommand_Find-DbaCommand PSFunction_Backup-DbaDatabase PSCommand_Backup-DbaDatabase PSFunction_New-DbaDirectory PSCommand_New-DbaDirectory PSFunction_Get-DbaDbQueryStoreOption PSCommand_Get-DbaDbQueryStoreOption PSFunction_Set-DbaDbQueryStoreOption PSCommand_Set-DbaDbQueryStoreOption PSFunction_Restore-DbaDatabase PSCommand_Restore-DbaDatabase PSFunction_Copy-DbaDbQueryStoreOption PSCommand_Copy-DbaDbQueryStoreOption PSFunction_Get-DbaExecutionPlan PSCommand_Get-DbaExecutionPlan PSFunction_Export-DbaExecutionPlan PSCommand_Export-DbaExecutionPlan PSFunction_Set-DbaSpConfigure PSCommand_Set-DbaSpConfigure PSFunction_Test-DbaIdentityUsage PSCommand_Test-DbaIdentityUsage PSFunction_Get-DbaDbAssembly PSCommand_Get-DbaDbAssembly PSFunction_Get-DbaAgentJob PSCommand_Get-DbaAgentJob PSFunction_Get-DbaCustomError PSCommand_Get-DbaCustomError PSFunction_Get-DbaCredential PSCommand_Get-DbaCredential PSFunction_Get-DbaBackupDevice PSCommand_Get-DbaBackupDevice PSFunction_Get-DbaAgentProxy PSCommand_Get-DbaAgentProxy PSFunction_Get-DbaDbEncryption PSCommand_Get-DbaDbEncryption PSFunction_Remove-DbaDatabase PSCommand_Remove-DbaDatabase PSFunction_Get-DbaQueryExecutionTime PSCommand_Get-DbaQueryExecutionTime PSFunction_Get-DbaTempdbUsage PSCommand_Get-DbaTempdbUsage PSFunction_Find-DbaDbGrowthEvent PSCommand_Find-DbaDbGrowthEvent PSFunction_Test-DbaLinkedServerConnection PSCommand_Test-DbaLinkedServerConnection PSFunction_Get-DbaDbFile PSCommand_Get-DbaDbFile PSFunction_Read-DbaTransactionLog PSCommand_Read-DbaTransactionLog PSFunction_Get-DbaDbTable PSCommand_Get-DbaDbTable PSFunction_Invoke-DbaDbShrink PSCommand_Invoke-DbaDbShrink PSFunction_Get-DbaEstimatedCompletionTime PSCommand_Get-DbaEstimatedCompletionTime PSFunction_Get-DbaLinkedServer PSCommand_Get-DbaLinkedServer PSFunction_New-DbaAgentJob PSCommand_New-DbaAgentJob PSFunction_Get-DbaLogin PSCommand_Get-DbaLogin PSFunction_New-DbaScriptingOption PSCommand_New-DbaScriptingOption PSFunction_Save-DbaDiagnosticQueryScript PSCommand_Save-DbaDiagnosticQueryScript PSFunction_Invoke-DbaDiagnosticQuery PSCommand_Invoke-DbaDiagnosticQuery PSFunction_Export-DbaDiagnosticQuery PSCommand_Export-DbaDiagnosticQuery PSFunction_Invoke-DbaWhoIsActive PSCommand_Invoke-DbaWhoIsActive PSFunction_Set-DbaAgentJob PSCommand_Set-DbaAgentJob PSFunction_Remove-DbaAgentJob PSCommand_Remove-DbaAgentJob PSFunction_New-DbaAgentJobStep PSCommand_New-DbaAgentJobStep PSFunction_Set-DbaAgentJobStep PSCommand_Set-DbaAgentJobStep PSFunction_Remove-DbaAgentJobStep PSCommand_Remove-DbaAgentJobStep PSFunction_New-DbaAgentSchedule PSCommand_New-DbaAgentSchedule PSFunction_Set-DbaAgentSchedule PSCommand_Set-DbaAgentSchedule PSFunction_Remove-DbaAgentSchedule PSCommand_Remove-DbaAgentSchedule PSFunction_Backup-DbaDbCertificate PSCommand_Backup-DbaDbCertificate PSFunction_Get-DbaDbCertificate PSCommand_Get-DbaDbCertificate PSFunction_Get-DbaEndpoint PSCommand_Get-DbaEndpoint PSFunction_Get-DbaDbMasterKey PSCommand_Get-DbaDbMasterKey PSFunction_Get-DbaSchemaChangeHistory PSCommand_Get-DbaSchemaChangeHistory PSFunction_Get-DbaServerAudit PSCommand_Get-DbaServerAudit PSFunction_Get-DbaServerAuditSpecification PSCommand_Get-DbaServerAuditSpecification PSFunction_Get-DbaProductKey PSCommand_Get-DbaProductKey PSFunction_Get-DbatoolsLog PSCommand_Get-DbatoolsLog PSFunction_Restore-DbaDbCertificate PSCommand_Restore-DbaDbCertificate PSFunction_New-DbaDbCertificate PSCommand_New-DbaDbCertificate PSFunction_New-DbaDbMasterKey PSCommand_New-DbaDbMasterKey PSFunction_New-DbaServiceMasterKey PSCommand_New-DbaServiceMasterKey PSFunction_Remove-DbaDbCertificate PSCommand_Remove-DbaDbCertificate PSFunction_Remove-DbaDbMasterKey PSCommand_Remove-DbaDbMasterKey PSFunction_New-DbaConnectionStringBuilder PSCommand_New-DbaConnectionStringBuilder PSFunction_Get-DbaInstanceProperty PSCommand_Get-DbaInstanceProperty PSFunction_Get-DbaInstanceUserOption PSCommand_Get-DbaInstanceUserOption PSFunction_New-DbaConnectionString PSCommand_New-DbaConnectionString PSFunction_Get-DbaAgentSchedule PSCommand_Get-DbaAgentSchedule PSFunction_Read-DbaTraceFile PSCommand_Read-DbaTraceFile PSFunction_Get-DbaServerInstallDate PSCommand_Get-DbaServerInstallDate PSFunction_Backup-DbaDbMasterKey PSCommand_Backup-DbaDbMasterKey PSFunction_Get-DbaAgentJobHistory PSCommand_Get-DbaAgentJobHistory PSFunction_Get-DbaMaintenanceSolutionLog PSCommand_Get-DbaMaintenanceSolutionLog PSFunction_Invoke-DbaDbLogShipRecovery PSCommand_Invoke-DbaDbLogShipRecovery PSFunction_Find-DbaTrigger PSCommand_Find-DbaTrigger PSFunction_Find-DbaView PSCommand_Find-DbaView PSFunction_Invoke-DbaDbUpgrade PSCommand_Invoke-DbaDbUpgrade PSFunction_Get-DbaDbUser PSCommand_Get-DbaDbUser PSFunction_Get-DbaAgentLog PSCommand_Get-DbaAgentLog PSFunction_Get-DbaDbMailLog PSCommand_Get-DbaDbMailLog PSFunction_Get-DbaDbMailHistory PSCommand_Get-DbaDbMailHistory PSFunction_Get-DbaDbView PSCommand_Get-DbaDbView PSFunction_Get-DbaDbUdf PSCommand_Get-DbaDbUdf PSFunction_Get-DbaDbPartitionFunction PSCommand_Get-DbaDbPartitionFunction PSFunction_Get-DbaDbPartitionScheme PSCommand_Get-DbaDbPartitionScheme PSFunction_Get-DbaDefaultPath PSCommand_Get-DbaDefaultPath PSFunction_Get-DbaDbStoredProcedure PSCommand_Get-DbaDbStoredProcedure PSFunction_Test-DbaDbCompression PSCommand_Test-DbaDbCompression PSFunction_Mount-DbaDatabase PSCommand_Mount-DbaDatabase PSFunction_Dismount-DbaDatabase PSCommand_Dismount-DbaDatabase PSFunction_Get-DbaAgReplica PSCommand_Get-DbaAgReplica PSFunction_Get-DbaAgDatabase PSCommand_Get-DbaAgDatabase PSFunction_Get-DbaModule PSCommand_Get-DbaModule PSFunction_Sync-DbaLoginPermission PSCommand_Sync-DbaLoginPermission PSFunction_New-DbaCredential PSCommand_New-DbaCredential PSFunction_Get-DbaFile PSCommand_Get-DbaFile PSFunction_Set-DbaDbCompression PSCommand_Set-DbaDbCompression PSFunction_Get-DbaTraceFlag PSCommand_Get-DbaTraceFlag PSFunction_Invoke-DbaCycleErrorLog PSCommand_Invoke-DbaCycleErrorLog PSFunction_Get-DbaAvailableCollation PSCommand_Get-DbaAvailableCollation PSFunction_Get-DbaUserPermission PSCommand_Get-DbaUserPermission PSFunction_Get-DbaAgHadr PSCommand_Get-DbaAgHadr PSFunction_Find-DbaSimilarTable PSCommand_Find-DbaSimilarTable PSFunction_Get-DbaTrace PSCommand_Get-DbaTrace PSFunction_Get-DbaSuspectPage PSCommand_Get-DbaSuspectPage PSFunction_Get-DbaWaitStatistic PSCommand_Get-DbaWaitStatistic PSFunction_Clear-DbaWaitStatistics PSCommand_Clear-DbaWaitStatistics PSFunction_Get-DbaTopResourceUsage PSCommand_Get-DbaTopResourceUsage PSFunction_New-DbaLogin PSCommand_New-DbaLogin PSFunction_Get-DbaAgListener PSCommand_Get-DbaAgListener PSFunction_Invoke-DbaDbClone PSCommand_Invoke-DbaDbClone PSFunction_Disable-DbaTraceFlag PSCommand_Disable-DbaTraceFlag PSFunction_Enable-DbaTraceFlag PSCommand_Enable-DbaTraceFlag PSFunction_Start-DbaAgentJob PSCommand_Start-DbaAgentJob PSFunction_Stop-DbaAgentJob PSCommand_Stop-DbaAgentJob PSFunction_New-DbaAgentProxy PSCommand_New-DbaAgentProxy PSFunction_Test-DbaDbLogShipStatus PSCommand_Test-DbaDbLogShipStatus PSFunction_Get-DbaXESessionTarget PSCommand_Get-DbaXESessionTarget PSFunction_New-DbaXESmartTargetResponse PSCommand_New-DbaXESmartTargetResponse PSFunction_New-DbaXESmartTarget PSCommand_New-DbaXESmartTarget PSFunction_Get-DbaDbVirtualLogFile PSCommand_Get-DbaDbVirtualLogFile PSFunction_Get-DbaBackupInformation PSCommand_Get-DbaBackupInformation PSFunction_Start-DbaXESession PSCommand_Start-DbaXESession PSFunction_Stop-DbaXESession PSCommand_Stop-DbaXESession PSFunction_Set-DbaDbRecoveryModel PSCommand_Set-DbaDbRecoveryModel PSFunction_Get-DbaDbRecoveryModel PSCommand_Get-DbaDbRecoveryModel PSFunction_Get-DbaWaitingTask PSCommand_Get-DbaWaitingTask PSFunction_Remove-DbaDbUser PSCommand_Remove-DbaDbUser PSFunction_Get-DbaDump PSCommand_Get-DbaDump PSFunction_Invoke-DbaAdvancedRestore PSCommand_Invoke-DbaAdvancedRestore PSFunction_Format-DbaBackupInformation PSCommand_Format-DbaBackupInformation PSFunction_Get-DbaAgentJobStep PSCommand_Get-DbaAgentJobStep PSFunction_Test-DbaBackupInformation PSCommand_Test-DbaBackupInformation PSFunction_Invoke-DbaBalanceDataFiles PSCommand_Invoke-DbaBalanceDataFiles PSFunction_Select-DbaBackupInformation PSCommand_Select-DbaBackupInformation PSFunction_Publish-DbaDacPackage PSCommand_Publish-DbaDacPackage PSFunction_Copy-DbaDbTableData PSCommand_Copy-DbaDbTableData PSFunction_Invoke-DbaQuery PSCommand_Invoke-DbaQuery PSFunction_Remove-DbaLogin PSCommand_Remove-DbaLogin PSFunction_Get-DbaAgentJobCategory PSCommand_Get-DbaAgentJobCategory PSFunction_New-DbaAgentJobCategory PSCommand_New-DbaAgentJobCategory PSFunction_Remove-DbaAgentJobCategory PSCommand_Remove-DbaAgentJobCategory PSFunction_Set-DbaAgentJobCategory PSCommand_Set-DbaAgentJobCategory PSFunction_Get-DbaDbRole PSCommand_Get-DbaDbRole PSFunction_Get-DbaServerRole PSCommand_Get-DbaServerRole PSFunction_Find-DbaBackup PSCommand_Find-DbaBackup PSFunction_Remove-DbaXESession PSCommand_Remove-DbaXESession PSFunction_New-DbaXESession PSCommand_New-DbaXESession PSFunction_Get-DbaXEStore PSCommand_Get-DbaXEStore PSFunction_New-DbaXESmartTableWriter PSCommand_New-DbaXESmartTableWriter PSFunction_New-DbaXESmartReplay PSCommand_New-DbaXESmartReplay PSFunction_New-DbaXESmartEmail PSCommand_New-DbaXESmartEmail PSFunction_New-DbaXESmartQueryExec PSCommand_New-DbaXESmartQueryExec PSFunction_Start-DbaXESmartTarget PSCommand_Start-DbaXESmartTarget PSFunction_Get-DbaOrphanUser PSCommand_Get-DbaOrphanUser PSFunction_Get-DbaOpenTransaction PSCommand_Get-DbaOpenTransaction PSFunction_Get-DbaDbLogShipError PSCommand_Get-DbaDbLogShipError PSFunction_Test-DbaBuild PSCommand_Test-DbaBuild PSFunction_Get-DbaXESessionTemplate PSCommand_Get-DbaXESessionTemplate PSFunction_ConvertTo-DbaXESession PSCommand_ConvertTo-DbaXESession PSFunction_Start-DbaTrace PSCommand_Start-DbaTrace PSFunction_Stop-DbaTrace PSCommand_Stop-DbaTrace PSFunction_Remove-DbaTrace PSCommand_Remove-DbaTrace PSFunction_Set-DbaLogin PSCommand_Set-DbaLogin PSFunction_Copy-DbaXESessionTemplate PSCommand_Copy-DbaXESessionTemplate PSFunction_Get-DbaXEObject PSCommand_Get-DbaXEObject PSFunction_ConvertTo-DbaDataTable PSCommand_ConvertTo-DbaDataTable PSFunction_Find-DbaDisabledIndex PSCommand_Find-DbaDisabledIndex PSFunction_Get-DbaXESmartTarget PSCommand_Get-DbaXESmartTarget PSFunction_Remove-DbaXESmartTarget PSCommand_Remove-DbaXESmartTarget PSFunction_Stop-DbaXESmartTarget PSCommand_Stop-DbaXESmartTarget PSFunction_Get-DbaCmsRegServerGroup PSCommand_Get-DbaCmsRegServerGroup PSFunction_New-DbaDbUser PSCommand_New-DbaDbUser PSFunction_Measure-DbaDiskSpaceRequirement PSCommand_Measure-DbaDiskSpaceRequirement PSFunction_New-DbaXESmartCsvWriter PSCommand_New-DbaXESmartCsvWriter PSFunction_Invoke-DbaXeReplay PSCommand_Invoke-DbaXeReplay PSFunction_Find-DbaInstance PSCommand_Find-DbaInstance PSFunction_Test-DbaDiskSpeed PSCommand_Test-DbaDiskSpeed PSFunction_Get-DbaDbExtentDiff PSCommand_Get-DbaDbExtentDiff PSFunction_Read-DbaAuditFile PSCommand_Read-DbaAuditFile PSFunction_Get-DbaDbCompression PSCommand_Get-DbaDbCompression PSFunction_Invoke-DbaDbDecryptObject PSCommand_Invoke-DbaDbDecryptObject PSFunction_Get-DbaDbForeignKey PSCommand_Get-DbaDbForeignKey PSFunction_Get-DbaDbCheckConstraint PSCommand_Get-DbaDbCheckConstraint PSFunction_Set-DbaAgentAlert PSCommand_Set-DbaAgentAlert PSFunction_Get-DbaWaitResource PSCommand_Get-DbaWaitResource PSFunction_Get-DbaDbPageInfo PSCommand_Get-DbaDbPageInfo PSFunction_Get-DbaConnection PSCommand_Get-DbaConnection PSFunction_Test-DbaLoginPassword PSCommand_Test-DbaLoginPassword PSFunction_Get-DbaErrorLogConfig PSCommand_Get-DbaErrorLogConfig PSFunction_Set-DbaErrorLogConfig PSCommand_Set-DbaErrorLogConfig PSFunction_Get-DbaPlanCache PSCommand_Get-DbaPlanCache PSFunction_Clear-DbaPlanCache PSCommand_Clear-DbaPlanCache PSFunction_ConvertTo-DbaTimeline PSCommand_ConvertTo-DbaTimeline PSFunction_Get-DbaDbMail PSCommand_Get-DbaDbMail PSFunction_Get-DbaDbMailAccount PSCommand_Get-DbaDbMailAccount PSFunction_Get-DbaDbMailProfile PSCommand_Get-DbaDbMailProfile PSFunction_Get-DbaDbMailConfig PSCommand_Get-DbaDbMailConfig PSFunction_Get-DbaDbMailServer PSCommand_Get-DbaDbMailServer PSFunction_Get-DbaResourceGovernor PSCommand_Get-DbaResourceGovernor PSFunction_Get-DbaRgResourcePool PSCommand_Get-DbaRgResourcePool PSFunction_Get-DbaRgWorkloadGroup PSCommand_Get-DbaRgWorkloadGroup PSFunction_Get-DbaRgClassifierFunction PSCommand_Get-DbaRgClassifierFunction PSFunction_Export-DbaInstance PSCommand_Export-DbaInstance PSFunction_Invoke-DbatoolsRenameHelper PSCommand_Invoke-DbatoolsRenameHelper PSFunction_Measure-DbatoolsImport PSCommand_Measure-DbatoolsImport PSFunction_Get-DbaDeprecatedFeature PSCommand_Get-DbaDeprecatedFeature PSFunction_Test-DbaDeprecatedFeature PSCommand_Test-DbaDeprecatedFeature PSFunction_Get-DbaDbFeatureUsage PSCommand_Get-DbaDbFeatureUsage PSFunction_Stop-DbaEndpoint PSCommand_Stop-DbaEndpoint PSFunction_Start-DbaEndpoint PSCommand_Start-DbaEndpoint PSFunction_Set-DbaDbMirror PSCommand_Set-DbaDbMirror PSFunction_Repair-DbaDbMirror PSCommand_Repair-DbaDbMirror PSFunction_Remove-DbaEndpoint PSCommand_Remove-DbaEndpoint PSFunction_Remove-DbaDbMirrorMonitor PSCommand_Remove-DbaDbMirrorMonitor PSFunction_Remove-DbaDbMirror PSCommand_Remove-DbaDbMirror PSFunction_New-DbaEndpoint PSCommand_New-DbaEndpoint PSFunction_Invoke-DbaDbMirroring PSCommand_Invoke-DbaDbMirroring PSFunction_Invoke-DbaDbMirrorFailover PSCommand_Invoke-DbaDbMirrorFailover PSFunction_Get-DbaDbMirrorMonitor PSCommand_Get-DbaDbMirrorMonitor PSFunction_Get-DbaDbMirror PSCommand_Get-DbaDbMirror PSFunction_Add-DbaDbMirrorMonitor PSCommand_Add-DbaDbMirrorMonitor PSFunction_Test-DbaEndpoint PSCommand_Test-DbaEndpoint PSFunction_Get-DbaDbSharePoint PSCommand_Get-DbaDbSharePoint PSFunction_Get-DbaDbMemoryUsage PSCommand_Get-DbaDbMemoryUsage PSFunction_Clear-DbaLatchStatistics PSCommand_Clear-DbaLatchStatistics PSFunction_Get-DbaCpuRingBuffer PSCommand_Get-DbaCpuRingBuffer PSFunction_Get-DbaIoLatency PSCommand_Get-DbaIoLatency PSFunction_Get-DbaLatchStatistic PSCommand_Get-DbaLatchStatistic PSFunction_Get-DbaSpinLockStatistic PSCommand_Get-DbaSpinLockStatistic PSFunction_Add-DbaAgDatabase PSCommand_Add-DbaAgDatabase PSFunction_Add-DbaAgListener PSCommand_Add-DbaAgListener PSFunction_Add-DbaAgReplica PSCommand_Add-DbaAgReplica PSFunction_Grant-DbaAgPermission PSCommand_Grant-DbaAgPermission PSFunction_Invoke-DbaAgFailover PSCommand_Invoke-DbaAgFailover PSFunction_Join-DbaAvailabilityGroup PSCommand_Join-DbaAvailabilityGroup PSFunction_New-DbaAvailabilityGroup PSCommand_New-DbaAvailabilityGroup PSFunction_Remove-DbaAgDatabase PSCommand_Remove-DbaAgDatabase PSFunction_Remove-DbaAgListener PSCommand_Remove-DbaAgListener PSFunction_Remove-DbaAvailabilityGroup PSCommand_Remove-DbaAvailabilityGroup PSFunction_Revoke-DbaAgPermission PSCommand_Revoke-DbaAgPermission PSFunction_Get-DbaDbCompatibility PSCommand_Get-DbaDbCompatibility PSFunction_Set-DbaDbCompatibility PSCommand_Set-DbaDbCompatibility PSFunction_Invoke-DbatoolsFormatter PSCommand_Invoke-DbatoolsFormatter PSFunction_Remove-DbaAgReplica PSCommand_Remove-DbaAgReplica PSFunction_Resume-DbaAgDbDataMovement PSCommand_Resume-DbaAgDbDataMovement PSFunction_Set-DbaAgListener PSCommand_Set-DbaAgListener PSFunction_Set-DbaAgReplica PSCommand_Set-DbaAgReplica PSFunction_Set-DbaAvailabilityGroup PSCommand_Set-DbaAvailabilityGroup PSFunction_Set-DbaEndpoint PSCommand_Set-DbaEndpoint PSFunction_Suspend-DbaAgDbDataMovement PSCommand_Suspend-DbaAgDbDataMovement PSFunction_Sync-DbaAvailabilityGroup PSCommand_Sync-DbaAvailabilityGroup PSFunction_Get-DbaMemoryCondition PSCommand_Get-DbaMemoryCondition PSFunction_Remove-DbaDbBackupRestoreHistory PSCommand_Remove-DbaDbBackupRestoreHistory PSFunction_New-DbaDatabase PSCommand_New-DbaDatabase PSFunction_New-DbaDacOption PSCommand_New-DbaDacOption PSFunction_Get-DbaDbccHelp PSCommand_Get-DbaDbccHelp PSFunction_Get-DbaDbccMemoryStatus PSCommand_Get-DbaDbccMemoryStatus PSFunction_Get-DbaDbccProcCache PSCommand_Get-DbaDbccProcCache PSFunction_Get-DbaDbccUserOption PSCommand_Get-DbaDbccUserOption PSFunction_Get-DbaAgentServer PSCommand_Get-DbaAgentServer PSFunction_Set-DbaAgentServer PSCommand_Set-DbaAgentServer PSFunction_Invoke-DbaDbccFreeCache PSCommand_Invoke-DbaDbccFreeCache PSFunction_Export-DbatoolsConfig PSCommand_Export-DbatoolsConfig PSFunction_Import-DbatoolsConfig PSCommand_Import-DbatoolsConfig PSFunction_Reset-DbatoolsConfig PSCommand_Reset-DbatoolsConfig PSFunction_Unregister-DbatoolsConfig PSCommand_Unregister-DbatoolsConfig PSFunction_Join-DbaPath PSCommand_Join-DbaPath PSFunction_Resolve-DbaPath PSCommand_Resolve-DbaPath PSFunction_Export-DbaUser PSCommand_Export-DbaUser PSFunction_Get-DbaSsisExecutionHistory PSCommand_Get-DbaSsisExecutionHistory PSFunction_Get-DbaRepDistributor PSCommand_Get-DbaRepDistributor PSFunction_Get-DbaCmsRegServerStore PSCommand_Get-DbaCmsRegServerStore PSFunction_Copy-DbaPolicyManagement PSCommand_Copy-DbaPolicyManagement PSFunction_Copy-DbaDataCollector PSCommand_Copy-DbaDataCollector PSFunction_Get-DbaCmsRegServer PSCommand_Get-DbaCmsRegServer PSFunction_Copy-DbaSsisCatalog PSCommand_Copy-DbaSsisCatalog PSFunction_New-DbaSsisCatalog PSCommand_New-DbaSsisCatalog PSFunction_Get-DbaSsisEnvironmentVariable PSCommand_Get-DbaSsisEnvironmentVariable PSFunction_Get-DbaPbmCategory PSCommand_Get-DbaPbmCategory PSFunction_Get-DbaPbmCategorySubscription PSCommand_Get-DbaPbmCategorySubscription PSFunction_Get-DbaPbmCondition PSCommand_Get-DbaPbmCondition PSFunction_Get-DbaPbmObjectSet PSCommand_Get-DbaPbmObjectSet PSFunction_Get-DbaPbmPolicy PSCommand_Get-DbaPbmPolicy PSFunction_Get-DbaPbmStore PSCommand_Get-DbaPbmStore PSFunction_Add-DbaCmsRegServer PSCommand_Add-DbaCmsRegServer PSFunction_Add-DbaCmsRegServerGroup PSCommand_Add-DbaCmsRegServerGroup PSFunction_Export-DbaCmsRegServer PSCommand_Export-DbaCmsRegServer PSFunction_Import-DbaCmsRegServer PSCommand_Import-DbaCmsRegServer PSFunction_Move-DbaCmsRegServer PSCommand_Move-DbaCmsRegServer PSFunction_Move-DbaCmsRegServerGroup PSCommand_Move-DbaCmsRegServerGroup PSFunction_Remove-DbaCmsRegServer PSCommand_Remove-DbaCmsRegServer PSFunction_Remove-DbaCmsRegServerGroup PSCommand_Remove-DbaCmsRegServerGroup PSFunction_Get-DbaRepPublication PSCommand_Get-DbaRepPublication PSFunction_Test-DbaRepLatency PSCommand_Test-DbaRepLatency PSFunction_Export-DbaRepServerSetting PSCommand_Export-DbaRepServerSetting PSFunction_Get-DbaRepServer PSCommand_Get-DbaRepServer PSFunction_Install-DbaSqlWatch PSCommand_Install-DbaSqlWatch PSFunction_Uninstall-DbaSqlWatch PSCommand_Uninstall-DbaSqlWatch PSFunction_Get-DbaRegistryRoot PSCommand_Get-DbaRegistryRoot PSFunction_Install-DbaMaintenanceSolution PSCommand_Install-DbaMaintenanceSolution PSFunction_New-DbatoolsSupportPackage PSCommand_New-DbatoolsSupportPackage PSFunction_Export-DbaScript PSCommand_Export-DbaScript PSFunction_Get-DbaAgentJobOutputFile PSCommand_Get-DbaAgentJobOutputFile PSFunction_Set-DbaAgentJobOutputFile PSCommand_Set-DbaAgentJobOutputFile PSFunction_Get-DbaBuildReference PSCommand_Get-DbaBuildReference PSFunction_New-DbaDacProfile PSCommand_New-DbaDacProfile PSFunction_Import-DbaXESessionTemplate PSCommand_Import-DbaXESessionTemplate PSFunction_Export-DbaXESessionTemplate PSCommand_Export-DbaXESessionTemplate PSFunction_Import-DbaSpConfigure PSCommand_Import-DbaSpConfigure PSFunction_Export-DbaSpConfigure PSCommand_Export-DbaSpConfigure PSFunction_Update-Dbatools PSCommand_Update-Dbatools PSFunction_Install-DbaWhoIsActive PSCommand_Install-DbaWhoIsActive PSFunction_Install-DbaFirstResponderKit PSCommand_Install-DbaFirstResponderKit PSFunction_Read-DbaXEFile PSCommand_Read-DbaXEFile PSFunction_Watch-DbaXESession PSCommand_Watch-DbaXESession PSFunction_Test-DbaMaxMemory PSCommand_Test-DbaMaxMemory PSFunction_Rename-DbaDatabase PSCommand_Rename-DbaDatabase PSFunction_Update-DbaInstance PSCommand_Update-DbaInstance PSFunction_Invoke-DbaPfRelog PSCommand_Invoke-DbaPfRelog PSFunction_Get-DbaPfDataCollectorCounter PSCommand_Get-DbaPfDataCollectorCounter PSFunction_Get-DbaPfDataCollectorCounterSample PSCommand_Get-DbaPfDataCollectorCounterSample PSFunction_Get-DbaPfDataCollector PSCommand_Get-DbaPfDataCollector PSFunction_Get-DbaPfDataCollectorSet PSCommand_Get-DbaPfDataCollectorSet PSFunction_Start-DbaPfDataCollectorSet PSCommand_Start-DbaPfDataCollectorSet PSFunction_Stop-DbaPfDataCollectorSet PSCommand_Stop-DbaPfDataCollectorSet PSFunction_Export-DbaPfDataCollectorSetTemplate PSCommand_Export-DbaPfDataCollectorSetTemplate PSFunction_Get-DbaPfDataCollectorSetTemplate PSCommand_Get-DbaPfDataCollectorSetTemplate PSFunction_Import-DbaPfDataCollectorSetTemplate PSCommand_Import-DbaPfDataCollectorSetTemplate PSFunction_Remove-DbaPfDataCollectorSet PSCommand_Remove-DbaPfDataCollectorSet PSFunction_Add-DbaPfDataCollectorCounter PSCommand_Add-DbaPfDataCollectorCounter PSFunction_Remove-DbaPfDataCollectorCounter PSCommand_Remove-DbaPfDataCollectorCounter PSFunction_Get-DbaPfAvailableCounter PSCommand_Get-DbaPfAvailableCounter PSFunction_Export-DbaXECsv PSCommand_Export-DbaXECsv PSFunction_Get-DbaOperatingSystem PSCommand_Get-DbaOperatingSystem PSFunction_Get-DbaComputerSystem PSCommand_Get-DbaComputerSystem PSFunction_Set-DbaPrivilege PSCommand_Set-DbaPrivilege PSFunction_Set-DbaTcpPort PSCommand_Set-DbaTcpPort PSFunction_Set-DbaCmConnection PSCommand_Set-DbaCmConnection PSFunction_Get-DbaUptime PSCommand_Get-DbaUptime PSFunction_Get-DbaMemoryUsage PSCommand_Get-DbaMemoryUsage PSFunction_Clear-DbaConnectionPool PSCommand_Clear-DbaConnectionPool PSFunction_Get-DbaLocaleSetting PSCommand_Get-DbaLocaleSetting PSFunction_Get-DbaFilestream PSCommand_Get-DbaFilestream PSFunction_Enable-DbaFilestream PSCommand_Enable-DbaFilestream PSFunction_Disable-DbaFilestream PSCommand_Disable-DbaFilestream PSFunction_Get-DbaCpuUsage PSCommand_Get-DbaCpuUsage PSFunction_Get-DbaPowerPlan PSCommand_Get-DbaPowerPlan PSFunction_Get-DbaWsfcAvailableDisk PSCommand_Get-DbaWsfcAvailableDisk PSFunction_Get-DbaWsfcCluster PSCommand_Get-DbaWsfcCluster PSFunction_Get-DbaWsfcDisk PSCommand_Get-DbaWsfcDisk PSFunction_Get-DbaWsfcNetwork PSCommand_Get-DbaWsfcNetwork PSFunction_Get-DbaWsfcNetworkInterface PSCommand_Get-DbaWsfcNetworkInterface PSFunction_Get-DbaWsfcNode PSCommand_Get-DbaWsfcNode PSFunction_Get-DbaWsfcResource PSCommand_Get-DbaWsfcResource PSFunction_Get-DbaWsfcResourceType PSCommand_Get-DbaWsfcResourceType PSFunction_Get-DbaWsfcRole PSCommand_Get-DbaWsfcRole PSFunction_Get-DbaWsfcSharedVolume PSCommand_Get-DbaWsfcSharedVolume PSFunction_Export-DbaCredential PSCommand_Export-DbaCredential PSFunction_Export-DbaLinkedServer PSCommand_Export-DbaLinkedServer PSFunction_Get-DbaFeature PSCommand_Get-DbaFeature PSFunction_Update-DbaServiceAccount PSCommand_Update-DbaServiceAccount PSFunction_Remove-DbaClientAlias PSCommand_Remove-DbaClientAlias PSFunction_Disable-DbaAgHadr PSCommand_Disable-DbaAgHadr PSFunction_Enable-DbaAgHadr PSCommand_Enable-DbaAgHadr PSFunction_Stop-DbaService PSCommand_Stop-DbaService PSFunction_Start-DbaService PSCommand_Start-DbaService PSFunction_Restart-DbaService PSCommand_Restart-DbaService PSFunction_New-DbaClientAlias PSCommand_New-DbaClientAlias PSFunction_Get-DbaClientAlias PSCommand_Get-DbaClientAlias PSFunction_Remove-DbaNetworkCertificate PSCommand_Remove-DbaNetworkCertificate PSFunction_Enable-DbaForceNetworkEncryption PSCommand_Enable-DbaForceNetworkEncryption PSFunction_Disable-DbaForceNetworkEncryption PSCommand_Disable-DbaForceNetworkEncryption PSFunction_Get-DbaForceNetworkEncryption PSCommand_Get-DbaForceNetworkEncryption PSFunction_Remove-DbaComputerCertificate PSCommand_Remove-DbaComputerCertificate PSFunction_New-DbaComputerCertificate PSCommand_New-DbaComputerCertificate PSFunction_Get-DbaComputerCertificate PSCommand_Get-DbaComputerCertificate PSFunction_Add-DbaComputerCertificate PSCommand_Add-DbaComputerCertificate PSFunction_Get-DbaNetworkCertificate PSCommand_Get-DbaNetworkCertificate PSFunction_Set-DbaNetworkCertificate PSCommand_Set-DbaNetworkCertificate PSFunction_Invoke-DbaDbLogShipping PSCommand_Invoke-DbaDbLogShipping PSFunction_New-DbaCmConnection PSCommand_New-DbaCmConnection PSFunction_Get-DbaCmConnection PSCommand_Get-DbaCmConnection PSFunction_Remove-DbaCmConnection PSCommand_Remove-DbaCmConnection PSFunction_Test-DbaCmConnection PSCommand_Test-DbaCmConnection PSFunction_Get-DbaCmObject PSCommand_Get-DbaCmObject PSFunction_Set-DbaStartupParameter PSCommand_Set-DbaStartupParameter PSFunction_Get-DbaNetworkActivity PSCommand_Get-DbaNetworkActivity PSFunction_Get-DbaServerProtocol PSCommand_Get-DbaServerProtocol PSFunction_Watch-DbaUpdate PSCommand_Watch-DbaUpdate PSFunction_Uninstall-DbaWatchUpdate PSCommand_Uninstall-DbaWatchUpdate PSFunction_Install-DbaWatchUpdate PSCommand_Install-DbaWatchUpdate PSFunction_Get-DbaPrivilege PSCommand_Get-DbaPrivilege PSFunction_Get-DbaMsdtc PSCommand_Get-DbaMsdtc PSFunction_Get-DbaPageFileSetting PSCommand_Get-DbaPageFileSetting PSFunction_Copy-DbaCredential PSCommand_Copy-DbaCredential PSFunction_Test-DbaConnection PSCommand_Test-DbaConnection PSFunction_Reset-DbaAdmin PSCommand_Reset-DbaAdmin PSFunction_Copy-DbaLinkedServer PSCommand_Copy-DbaLinkedServer PSFunction_Get-DbaDiskSpace PSCommand_Get-DbaDiskSpace PSFunction_Test-DbaDiskAllocation PSCommand_Test-DbaDiskAllocation PSFunction_Test-DbaPowerPlan PSCommand_Test-DbaPowerPlan PSFunction_Set-DbaPowerPlan PSCommand_Set-DbaPowerPlan PSFunction_Test-DbaDiskAlignment PSCommand_Test-DbaDiskAlignment PSFunction_Get-DbaStartupParameter PSCommand_Get-DbaStartupParameter PSFunction_Get-DbaSpn PSCommand_Get-DbaSpn PSFunction_Test-DbaSpn PSCommand_Test-DbaSpn PSFunction_Set-DbaSpn PSCommand_Set-DbaSpn PSFunction_Remove-DbaSpn PSCommand_Remove-DbaSpn PSFunction_Get-DbaService PSCommand_Get-DbaService PSFunction_Get-DbaClientProtocol PSCommand_Get-DbaClientProtocol PSFunction_Get-DbaWindowsLog PSCommand_Get-DbaWindowsLog PSFunction_Show-DbaServerFileSystem PSCommand_Show-DbaServerFileSystem PSFunction_Show-DbaDbList PSCommand_Show-DbaDbList PSFunction_Test-DbaWindowsLogin PSCommand_Test-DbaWindowsLogin PSFunction_Find-DbaLoginInGroup PSCommand_Find-DbaLoginInGroup PSFunction_Import-DbaCsv PSCommand_Import-DbaCsv PSFunction_Export-DbaDacPackage PSCommand_Export-DbaDacPackage PSFunction_Get-DbatoolsConfig PSCommand_Get-DbatoolsConfig PSFunction_Get-DbatoolsConfigValue PSCommand_Get-DbatoolsConfigValue PSFunction_Register-DbatoolsConfig PSCommand_Register-DbatoolsConfig PSFunction_Get-DbaErrorLog PSCommand_Get-DbaErrorLog PSFunction_Get-DbaManagementObject PSCommand_Get-DbaManagementObject PSFunction_Test-DbaManagementObject PSCommand_Test-DbaManagementObject PSIncludes_Function</S>
          <S N="developmentDependency">False</S>
          <S N="updated">2018-12-07T12:06:29Z</S>
          <S N="NormalizedVersion">0.9.711</S>
          <S N="Authors">Chrissy LeMaire</S>
          <S N="IsPrerelease">false</S>
          <S N="ItemType">Module</S>
          <S N="FileList">dbatools.nuspec|allcommands.zip|changelog.md|contributing.md|dbatools.psd1|dbatools.psm1|install.ps1|LICENSE|readme.md|bin\build-project.ps1|bin\dbatools-buildref-index.json|bin\dbatools-index.json|bin\dbatools.dll|bin\dbatools.pdb|bin\dbatools.xml|bin\library.ps1|bin\PSScriptAnalyzerRules.psd1|bin\sp_SQLskills_ConvertTraceToEEs.sql|bin\stig.sql|bin\thor.png|bin\type-extensions.ps1|bin\typealiases.ps1|bin\xetemplates-metadata.xml|bin\bcp\bcp.exe|bin\bcp\Resources\1033\bcp.rll|bin\csv\LumenWorks.Framework.IO.dll|bin\diagnosticquery\SQLServerDiagnosticQueries_2005_201810.sql|bin\diagnosticquery\SQLServerDiagnosticQueries_2008R2_201810.sql|bin\diagnosticquery\SQLServerDiagnosticQueries_2008_201810.sql|bin\diagnosticquery\SQLServerDiagnosticQueries_2012_201810.sql|bin\diagnosticquery\SQLServerDiagnosticQueries_2014_201810.sql|bin\diagnosticquery\SQLServerDiagnosticQueries_2016SP2_201810.sql|bin\diagnosticquery\SQLServerDiagnosticQueries_2016_201810.sql|bin\diagnosticquery\SQLServerDiagnosticQueries_2017_201810.sql|bin\diagnosticquery\SQLServerDiagnosticQueries_AzureSQLDatabase_201810.sql|bin\net452\dbatools.dll|bin\net452\dbatools.pdb|bin\net452\dbatools.xml|bin\netcoreapp2.1\dbatools.deps.json|bin\netcoreapp2.1\dbatools.dll|bin\netcoreapp2.1\dbatools.pdb|bin\netcoreapp2.1\dbatools.xml|bin\perfmontemplates\collectorsets.xml|bin\perfmontemplates\collectorsets\Long Running Queries.xml|bin\perfmontemplates\collectorsets\PAL - SQL Server 2005.xml|bin\perfmontemplates\collectorsets\PAL - SQL Server 2008 and R2.xml|bin\perfmontemplates\collectorsets\PAL - SQL Server 2012.xml|bin\perfmontemplates\collectorsets\PAL - SQL Server 2014 and Up.xml|bin\projects\dbatools\.vs\dbatools\v15\.suo|bin\smo\Accessibility.dll|bin\smo\Microsoft.AnalysisServices.AppLocal.Core.dll|bin\smo\Microsoft.AnalysisServices.AppLocal.dll|bin\smo\Microsoft.Azure.KeyVault.Core.dll|bin\smo\Microsoft.Data.Edm.dll|bin\smo\Microsoft.Data.OData.dll|bin\smo\Microsoft.Data.Tools.Components.dll|bin\smo\Microsoft.Data.Tools.Contracts.dll|bin\smo\Microsoft.Data.Tools.Schema.Sql.dll|bin\smo\Microsoft.Data.Tools.Schema.SqlTasks.targets|bin\smo\Microsoft.Data.Tools.Schema.Tasks.Sql.dll|bin\smo\Microsoft.Data.Tools.Schema.Utilities.Sql.dll|bin\smo\Microsoft.Data.Tools.Utilities.dll|bin\smo\Microsoft.DataTransfer.Common.Utils.dll|bin\smo\Microsoft.Practices.TransientFaultHandling.Core.dll|bin\smo\Microsoft.SqlServer.BatchParser.dll|bin\smo\Microsoft.SqlServer.BatchParserClient.dll|bin\smo\Microsoft.SqlServer.BulkInsertTaskConnections.dll|bin\smo\Microsoft.SqlServer.ConnectionInfo.dll|bin\smo\Microsoft.SqlServer.ConnectionInfoExtended.dll|bin\smo\Microsoft.SqlServer.Dac.dll|bin\smo\Microsoft.SqlServer.Dac.Extensions.dll|bin\smo\Microsoft.SqlServer.Dac.Extensions.xml|bin\smo\Microsoft.SqlServer.Dac.xml|bin\smo\Microsoft.SqlServer.Diagnostics.Strace.dll|bin\smo\Microsoft.SqlServer.Dmf.Common.dll|bin\smo\Microsoft.SqlServer.Dmf.dll|bin\smo\Microsoft.SqlServer.DmfSqlClrWrapper.dll|bin\smo\Microsoft.SqlServer.DtsServer.Interop.dll|bin\smo\Microsoft.SqlServer.IntegrationServices.ClusterManagement.dll|bin\smo\Microsoft.SqlServer.IntegrationServices.ISServerDBUpgrade.dll|bin\smo\Microsoft.SqlServer.IntegrationServices.Server.Common.dll|bin\smo\Microsoft.SqlServer.IntegrationServices.Server.dll|bin\smo\Microsoft.SqlServer.IntegrationServices.Server.IPC.dll|bin\smo\Microsoft.SqlServer.IntegrationServices.server.shared.dll|bin\smo\Microsoft.SqlServer.IntegrationServices.SqlTaskScheduler.dll|bin\smo\Microsoft.SqlServer.IntegrationServices.TaskScheduler.dll|bin\smo\Microsoft.SqlServer.IntegrationServices.WorkerAgent.dll|bin\smo\Microsoft.SqlServer.Management.AlwaysEncrypted.AzureKeyVaultProvider.dll|bin\smo\Microsoft.SqlServer.Management.AlwaysEncrypted.Management.dll|bin\smo\Microsoft.SqlServer.Management.AlwaysEncrypted.Types.dll|bin\smo\Microsoft.SqlServer.Management.AzureAuthenticationManagement.dll|bin\smo\Microsoft.SqlServer.Management.CloudAdapter.Client.dll|bin\smo\Microsoft.SqlServer.Management.CloudAdapter.Data.dll|bin\smo\Microsoft.SqlServer.Management.Collector.dll|bin\smo\Microsoft.SqlServer.Management.CollectorEnum.dll|bin\smo\Microsoft.SqlServer.Management.Dac.UniversalAuthProvider.dll|bin\smo\Microsoft.SqlServer.Management.HadrDmf.dll|bin\smo\Microsoft.SqlServer.Management.InMemoryOLTPMigrationAdvisor.dll|bin\smo\Microsoft.SqlServer.Management.IntegrationServices.dll|bin\smo\Microsoft.SqlServer.Management.IntegrationServicesEnum.dll|bin\smo\Microsoft.SqlServer.Management.RegisteredServers.dll|bin\smo\Microsoft.SqlServer.Management.Sdk.Scripting.dll|bin\smo\Microsoft.SqlServer.Management.Sdk.Sfc.dll|bin\smo\Microsoft.SqlServer.Management.SDK.SqlStudio.dll|bin\smo\Microsoft.SqlServer.Management.SmartAdminPolicies.dll|bin\smo\Microsoft.SqlServer.Management.Utility.dll|bin\smo\Microsoft.SqlServer.Management.UtilityEnum.dll|bin\smo\Microsoft.SqlServer.Management.XEvent.dll|bin\smo\Microsoft.SqlServer.Management.XEventDbScoped.dll|bin\smo\Microsoft.SqlServer.Management.XEventDbScopedEnum.dll|bin\smo\Microsoft.SqlServer.Management.XEventEnum.dll|bin\smo\Microsoft.SqlServer.OlapEnum.dll|bin\smo\Microsoft.SqlServer.PolicyEnum.dll|bin\smo\Microsoft.SqlServer.RegSvrEnum.dll|bin\smo\Microsoft.SqlServer.ReplEnum.dll|bin\smo\Microsoft.SqlServer.Replication.BusinessLogicSupport.dll|bin\smo\Microsoft.SqlServer.Replication.dll|bin\smo\Microsoft.SqlServer.Rmo.dll|bin\smo\Microsoft.SqlServer.ServiceBrokerEnum.dll|bin\smo\Microsoft.SqlServer.Smo.dll|bin\smo\Microsoft.SqlServer.SmoExtended.dll|bin\smo\Microsoft.SqlServer.SqlClrProvider.dll|bin\smo\Microsoft.SqlServer.SqlEnum.dll|bin\smo\Microsoft.SqlServer.SqlTDiagm.dll|bin\smo\Microsoft.SqlServer.SqlWmiManagement.dll|bin\smo\Microsoft.SqlServer.SString.dll|bin\smo\Microsoft.SqlServer.TransactSql.ScriptDom.dll|bin\smo\Microsoft.SqlServer.VulnerabilityAssessment.Model.dll|bin\smo\Microsoft.SqlServer.WmiEnum.dll|bin\smo\Microsoft.SqlServer.XE.Core.dll|bin\smo\Microsoft.SqlServer.XEvent.Configuration.dll|bin\smo\Microsoft.SqlServer.XEvent.dll|bin\smo\Microsoft.SqlServer.XEvent.Linq.dll|bin\smo\smo-deps.txt|bin\smo\sqlpackage.exe|bin\smo\sqlpackage.exe.config|bin\smo\coreclr\Microsoft.Data.Tools.Schema.Sql.dll|bin\smo\coreclr\Microsoft.Data.Tools.Sql.BatchParser.dll|bin\smo\coreclr\Microsoft.Data.Tools.Utilities.dll|bin\smo\coreclr\Microsoft.SqlServer.ConnectionInfo.dll|bin\smo\coreclr\Microsoft.SqlServer.Dac.dll|bin\smo\coreclr\Microsoft.SqlServer.Dac.Extensions.dll|bin\smo\coreclr\Microsoft.SqlServer.Management.Dmf.dll|bin\smo\coreclr\Microsoft.SqlServer.Management.PSProvider.dll|bin\smo\coreclr\Microsoft.SqlServer.Management.PSSnapins.dll|bin\smo\coreclr\Microsoft.SqlServer.Management.Sdk.Sfc.dll|bin\smo\coreclr\Microsoft.SqlServer.Management.XEvent.dll|bin\smo\coreclr\Microsoft.SqlServer.Management.XEventDbScoped.dll|bin\smo\coreclr\Microsoft.SqlServer.Management.XEventDbScopedEnum.dll|bin\smo\coreclr\Microsoft.SqlServer.Management.XEventEnum.dll|bin\smo\coreclr\Microsoft.SqlServer.Smo.dll|bin\smo\coreclr\Microsoft.SqlServer.SmoExtended.dll|bin\smo\coreclr\Microsoft.SqlServer.SqlEnum.dll|bin\smo\coreclr\Microsoft.SqlServer.TransactSql.ScriptDom.dll|bin\smo\coreclr\Microsoft.SqlServer.Types.dll|bin\smo\coreclr\System.Security.SecureString.dll|bin\sqlcmd\SQLCMD.EXE|bin\sqlcmd\Resources\1033\license_SQLCMD.txt|bin\sqlcmd\Resources\1033\SQLCMD.rll|bin\third-party-licenses\sql-server-data-tools-license-terms-vs2017.md|bin\third-party-licenses\sql-server-data-tools-license-terms.md|bin\third-party-licenses\ThirdPartyNoticesDacFramework.rtf|bin\XESmartTarget\CommandLine.dll|bin\XESmartTarget\CsvHelper.dll|bin\XESmartTarget\DouglasCrockford.JsMin.dll|bin\XESmartTarget\NLog.dll|bin\XESmartTarget\NLog.dll.nlog|bin\XESmartTarget\SmartFormat.dll|bin\XESmartTarget\XESmartTarget.Core.dll|bin\XEtemplates\15 Second IO Error.xml|bin\XEtemplates\Activity Detail Tracking.xml|bin\XEtemplates\Activity Tracking.xml|bin\XEtemplates\AlwaysOn Health Enhanced.xml|bin\XEtemplates\Blocked Process Report.xml|bin\XEtemplates\Connection Detail Tracking.xml|bin\XEtemplates\Connection Tracking.xml|bin\XEtemplates\Count Query Locks.xml|bin\XEtemplates\Database File IO.xml|bin\XEtemplates\Database Health 2012.xml|bin\XEtemplates\Database Health 2014.xml|bin\XEtemplates\Database Health 2016 and Above.xml|bin\XEtemplates\Deadlock Graphs.xml|bin\XEtemplates\Default Profiler Trace.xml|bin\XEtemplates\Deprecated Feature Usage.xml|bin\XEtemplates\Failing Queries.xml|bin\XEtemplates\Function Executions.xml|bin\XEtemplates\Index Page Splits.xml|bin\XEtemplates\Log File IO Detail Tracking.xml|bin\XEtemplates\Log File IO Tracking.xml|bin\XEtemplates\Login Tracker.xml|bin\XEtemplates\Long Running Queries.xml|bin\XEtemplates\Overly Complex Queries.xml|bin\XEtemplates\Profiler SP Counts.xml|bin\XEtemplates\Profiler Standard.xml|bin\XEtemplates\Profiler TSQL Duration.xml|bin\XEtemplates\Profiler TSQL Locks.xml|bin\XEtemplates\Profiler TSQL Replay.xml|bin\XEtemplates\Profiler TSQL SPs.xml|bin\XEtemplates\Profiler TSQL.xml|bin\XEtemplates\Profiler Tuning.xml|bin\XEtemplates\Queries and Resources.xml|bin\XEtemplates\Query Batch Detail Sampling.xml|bin\XEtemplates\Query Batch Sampling.xml|bin\XEtemplates\Query Batch Tracking.xml|bin\XEtemplates\Query Detail Sampling.xml|bin\XEtemplates\Query Detail Tracking.xml|bin\XEtemplates\Query Timeouts.xml|bin\XEtemplates\Query Wait Statistics Detail.xml|bin\XEtemplates\Query Wait Statistics.xml|bin\XEtemplates\Stored Procedure Parameters.xml|en-us\about_dbatools.help.txt|en-us\about_dbatools_importoptions.help.txt|en-us\about_dbatools_support.help.txt|functions\Add-DbaAgDatabase.ps1|functions\Add-DbaAgListener.ps1|functions\Add-DbaAgReplica.ps1|functions\Add-DbaCmsRegServer.ps1|functions\Add-DbaCmsRegServerGroup.ps1|functions\Add-DbaComputerCertificate.ps1|functions\Add-DbaDbMirrorMonitor.ps1|functions\Add-DbaPfDataCollectorCounter.ps1|functions\Backup-DbaDatabase.ps1|functions\Backup-DbaDbCertificate.ps1|functions\Backup-DbaDbMasterKey.ps1|functions\Clear-DbaConnectionPool.ps1|functions\Clear-DbaLatchStatistics.ps1|functions\Clear-DbaPlanCache.ps1|functions\Clear-DbaWaitStatistics.ps1|functions\Connect-DbaInstance.ps1|functions\ConvertTo-DbaDataTable.ps1|functions\ConvertTo-DbaTimeline.ps1|functions\ConvertTo-DbaXESession.ps1|functions\Copy-DbaAgentAlert.ps1|functions\Copy-DbaAgentJob.ps1|functions\Copy-DbaAgentJobCategory.ps1|functions\Copy-DbaAgentOperator.ps1|functions\Copy-DbaAgentProxy.ps1|functions\Copy-DbaAgentSchedule.ps1|functions\Copy-DbaAgentServer.ps1|functions\Copy-DbaBackupDevice.ps1|functions\Copy-DbaCmsRegServer.ps1|functions\Copy-DbaCredential.ps1|functions\Copy-DbaCustomError.ps1|functions\Copy-DbaDatabase.ps1|functions\Copy-DbaDataCollector.ps1|functions\Copy-DbaDbAssembly.ps1|functions\Copy-DbaDbMail.ps1|functions\Copy-DbaDbQueryStoreOption.ps1|functions\Copy-DbaDbTableData.ps1|functions\Copy-DbaEndpoint.ps1|functions\Copy-DbaLinkedServer.ps1|functions\Copy-DbaLogin.ps1|functions\Copy-DbaPolicyManagement.ps1|functions\Copy-DbaResourceGovernor.ps1|functions\Copy-DbaServerAudit.ps1|functions\Copy-DbaServerAuditSpecification.ps1|functions\Copy-DbaServerTrigger.ps1|functions\Copy-DbaSpConfigure.ps1|functions\Copy-DbaSsisCatalog.ps1|functions\Copy-DbaSysDbUserObject.ps1|functions\Copy-DbaXESession.ps1|functions\Copy-DbaXESessionTemplate.ps1|functions\Disable-DbaAgHadr.ps1|functions\Disable-DbaFilestream.ps1|functions\Disable-DbaForceNetworkEncryption.ps1|functions\Disable-DbaTraceFlag.ps1|functions\Dismount-DbaDatabase.ps1|functions\Enable-DbaAgHadr.ps1|functions\Enable-DbaFilestream.ps1|functions\Enable-DbaForceNetworkEncryption.ps1|functions\Enable-DbaTraceFlag.ps1|functions\Expand-DbaDbLogFile.ps1|functions\Export-DbaAvailabilityGroup.ps1|functions\Export-DbaCmsRegServer.ps1|functions\Export-DbaCredential.ps1|functions\Export-DbaDacPackage.ps1|functions\Export-DbaDiagnosticQuery.ps1|functions\Export-DbaExecutionPlan.ps1|functions\Export-DbaInstance.ps1|functions\Export-DbaLinkedServer.ps1|functions\Export-DbaLogin.ps1|functions\Export-DbaPfDataCollectorSetTemplate.ps1|functions\Export-DbaRepServerSetting.ps1|functions\Export-DbaScript.ps1|functions\Export-DbaSpConfigure.ps1|functions\Export-DbaUser.ps1|functions\Export-DbaXECsv.ps1|functions\Export-DbaXESessionTemplate.ps1|functions\Find-DbaAgentJob.ps1|functions\Find-DbaBackup.ps1|functions\Find-DbaCommand.ps1|functions\Find-DbaDatabase.ps1|functions\Find-DbaDbGrowthEvent.ps1|functions\Find-DbaDbUnusedIndex.ps1|functions\Find-DbaDisabledIndex.ps1|functions\Find-DbaDuplicateIndex.ps1|functions\Find-DbaInstance.ps1|functions\Find-DbaLoginInGroup.ps1|functions\Find-DbaOrphanedFile.ps1|functions\Find-DbaSimilarTable.ps1|functions\Find-DbaStoredProcedure.ps1|functions\Find-DbaTrigger.ps1|functions\Find-DbaUserObject.ps1|functions\Find-DbaView.ps1|functions\Format-DbaBackupInformation.ps1|functions\Get-DbaAgDatabase.ps1|functions\Get-DbaAgentAlert.ps1|functions\Get-DbaAgentJob.ps1|functions\Get-DbaAgentJobCategory.ps1|functions\Get-DbaAgentJobHistory.ps1|functions\Get-DbaAgentJobOutputFile.ps1|functions\Get-DbaAgentJobStep.ps1|functions\Get-DbaAgentLog.ps1|functions\Get-DbaAgentOperator.ps1|functions\Get-DbaAgentProxy.ps1|functions\Get-DbaAgentSchedule.ps1|functions\Get-DbaAgentServer.ps1|functions\Get-DbaAgHadr.ps1|functions\Get-DbaAgListener.ps1|functions\Get-DbaAgReplica.ps1|functions\Get-DbaAvailabilityGroup.ps1|functions\Get-DbaAvailableCollation.ps1|functions\Get-DbaBackupDevice.ps1|functions\Get-DbaBackupHistory.ps1|functions\Get-DbaBackupInformation.ps1|functions\Get-DbaBuildReference.ps1|functions\Get-DbaClientAlias.ps1|functions\Get-DbaClientProtocol.ps1|functions\Get-DbaCmConnection.ps1|functions\Get-DbaCmObject.ps1|functions\Get-DbaCmsRegServer.ps1|functions\Get-DbaCmsRegServerGroup.ps1|functions\Get-DbaCmsRegServerStore.ps1|functions\Get-DbaComputerCertificate.ps1|functions\Get-DbaComputerSystem.ps1|functions\Get-DbaConnection.ps1|functions\Get-DbaCpuRingBuffer.ps1|functions\Get-DbaCpuUsage.ps1|functions\Get-DbaCredential.ps1|functions\Get-DbaCustomError.ps1|functions\Get-DbaDatabase.ps1|functions\Get-DbaDbAssembly.ps1|functions\Get-DbaDbccHelp.ps1|functions\Get-DbaDbccMemoryStatus.ps1|functions\Get-DbaDbccProcCache.ps1|functions\Get-DbaDbccUserOption.ps1|functions\Get-DbaDbCertificate.ps1|functions\Get-DbaDbCheckConstraint.ps1|functions\Get-DbaDbCompatibility.ps1|functions\Get-DbaDbCompression.ps1|functions\Get-DbaDbEncryption.ps1|functions\Get-DbaDbExtentDiff.ps1|functions\Get-DbaDbFeatureUsage.ps1|functions\Get-DbaDbFile.ps1|functions\Get-DbaDbForeignKey.ps1|functions\Get-DbaDbLogShipError.ps1|functions\Get-DbaDbMail.ps1|functions\Get-DbaDbMailAccount.ps1|functions\Get-DbaDbMailConfig.ps1|functions\Get-DbaDbMailHistory.ps1|functions\Get-DbaDbMailLog.ps1|functions\Get-DbaDbMailProfile.ps1|functions\Get-DbaDbMailServer.ps1|functions\Get-DbaDbMasterKey.ps1|functions\Get-DbaDbMemoryUsage.ps1|functions\Get-DbaDbMirror.ps1|functions\Get-DbaDbMirrorMonitor.ps1|functions\Get-DbaDbPageInfo.ps1|functions\Get-DbaDbPartitionFunction.ps1|functions\Get-DbaDbPartitionScheme.ps1|functions\Get-DbaDbQueryStoreOption.ps1|functions\Get-DbaDbRecoveryModel.ps1|functions\Get-DbaDbRestoreHistory.ps1|functions\Get-DbaDbRoleMember.ps1|functions\Get-DbaDbSharePoint.ps1|functions\Get-DbaDbSnapshot.ps1|functions\Get-DbaDbSpace.ps1|functions\Get-DbaDbState.ps1|functions\Get-DbaDbStoredProcedure.ps1|functions\Get-DbaDbTable.ps1|functions\Get-DbaDbTrigger.ps1|functions\Get-DbaDbUdf.ps1|functions\Get-DbaDbUser.ps1|functions\Get-DbaDbView.ps1|functions\Get-DbaDbVirtualLogFile.ps1|functions\Get-DbaDefaultPath.ps1|functions\Get-DbaDependency.ps1|functions\Get-DbaDeprecatedFeature.ps1|functions\Get-DbaDetachedDatabaseInfo.ps1|functions\Get-DbaDiskSpace.ps1|functions\Get-DbaDump.ps1|functions\Get-DbaEndpoint.ps1|functions\Get-DbaErrorLog.ps1|functions\Get-DbaErrorLogConfig.ps1|functions\Get-DbaEstimatedCompletionTime.ps1|functions\Get-DbaExecutionPlan.ps1|functions\Get-DbaFeature.ps1|functions\Get-DbaFile.ps1|functions\Get-DbaFilestream.ps1|functions\Get-DbaForceNetworkEncryption.ps1|functions\Get-DbaHelpIndex.ps1|functions\Get-DbaInstanceProperty.ps1|functions\Get-DbaInstanceUserOption.ps1|functions\Get-DbaIoLatency.ps1|functions\Get-DbaLastBackup.ps1|functions\Get-DbaLastGoodCheckDb.ps1|functions\Get-DbaLatchStatistic.ps1|functions\Get-DbaLinkedServer.ps1|functions\Get-DbaLocaleSetting.ps1|functions\Get-DbaLogin.ps1|functions\Get-DbaMaintenanceSolutionLog.ps1|functions\Get-DbaManagementObject.ps1|functions\Get-DbaMaxMemory.ps1|functions\Get-DbaMemoryCondition.ps1|functions\Get-DbaMemoryUsage.ps1|functions\Get-DbaModule.ps1|functions\Get-DbaMsdtc.ps1|functions\Get-DbaNetworkActivity.ps1|functions\Get-DbaNetworkCertificate.ps1|functions\Get-DbaOpenTransaction.ps1|functions\Get-DbaOperatingSystem.ps1|functions\Get-DbaOrphanUser.ps1|functions\Get-DbaPageFileSetting.ps1|functions\Get-DbaPbmCategory.ps1|functions\Get-DbaPbmCategorySubscription.ps1|functions\Get-DbaPbmCondition.ps1|functions\Get-DbaPbmObjectSet.ps1|functions\Get-DbaPbmPolicy.ps1|functions\Get-DbaPbmStore.ps1|functions\Get-DbaPermission.ps1|functions\Get-DbaPfAvailableCounter.ps1|functions\Get-DbaPfDataCollector.ps1|functions\Get-DbaPfDataCollectorCounter.ps1|functions\Get-DbaPfDataCollectorCounterSample.ps1|functions\Get-DbaPfDataCollectorSet.ps1|functions\Get-DbaPfDataCollectorSetTemplate.ps1|functions\Get-DbaPlanCache.ps1|functions\Get-DbaPowerPlan.ps1|functions\Get-DbaPrivilege.ps1|functions\Get-DbaProcess.ps1|functions\Get-DbaProductKey.ps1|functions\Get-DbaQueryExecutionTime.ps1|functions\Get-DbaRegistryRoot.ps1|functions\Get-DbaRepDistributor.ps1|functions\Get-DbaRepPublication.ps1|functions\Get-DbaRepServer.ps1|functions\Get-DbaResourceGovernor.ps1|functions\Get-DbaRgClassifierFunction.ps1|functions\Get-DbaRgResourcePool.ps1|functions\Get-DbaRgWorkloadGroup.ps1|functions\Get-DbaRunningJob.ps1|functions\Get-DbaSchemaChangeHistory.ps1|functions\Get-DbaServerAudit.ps1|functions\Get-DbaServerAuditSpecification.ps1|functions\Get-DbaServerInstallDate.ps1|functions\Get-DbaServerProtocol.ps1|functions\Get-DbaServerRole.ps1|functions\Get-DbaServerRoleMember.ps1|functions\Get-DbaServerTrigger.ps1|functions\Get-DbaService.ps1|functions\Get-DbaSpConfigure.ps1|functions\Get-DbaSpinLockStatistic.ps1|functions\Get-DbaSpn.ps1|functions\Get-DbaSsisEnvironmentVariable.ps1|functions\Get-DbaSsisExecutionHistory.ps1|functions\Get-DbaStartupParameter.ps1|functions\Get-DbaSuspectPage.ps1|functions\Get-DbaTcpPort.ps1|functions\Get-DbaTempdbUsage.ps1|functions\Get-DbatoolsLog.ps1|functions\Get-DbaTopResourceUsage.ps1|functions\Get-DbaTrace.ps1|functions\Get-DbaTraceFlag.ps1|functions\Get-DbaUptime.ps1|functions\Get-DbaUserPermission.ps1|functions\Get-DbaWaitingTask.ps1|functions\Get-DbaWaitResource.ps1|functions\Get-DbaWaitStatistic.ps1|functions\Get-DbaWindowsLog.ps1|functions\Get-DbaWsfcAvailableDisk.ps1|functions\Get-DbaWsfcCluster.ps1|functions\Get-DbaWsfcDisk.ps1|functions\Get-DbaWsfcNetwork.ps1|functions\Get-DbaWsfcNetworkInterface.ps1|functions\Get-DbaWsfcNode.ps1|functions\Get-DbaWsfcResource.ps1|functions\Get-DbaWsfcResourceType.ps1|functions\Get-DbaWsfcRole.ps1|functions\Get-DbaWsfcSharedVolume.ps1|functions\Get-DbaXEObject.ps1|functions\Get-DbaXESession.ps1|functions\Get-DbaXESessionTarget.ps1|functions\Get-DbaXESessionTargetFile.ps1|functions\Get-DbaXESessionTemplate.ps1|functions\Get-DbaXESmartTarget.ps1|functions\Get-DbaXEStore.ps1|functions\Grant-DbaAgPermission.ps1|functions\Import-DbaCmsRegServer.ps1|functions\Import-DbaCsv.ps1|functions\Import-DbaPfDataCollectorSetTemplate.ps1|functions\Import-DbaSpConfigure.ps1|functions\Import-DbaXESessionTemplate.ps1|functions\Install-DbaFirstResponderKit.ps1|functions\Install-DbaMaintenanceSolution.ps1|functions\Install-DbaSqlWatch.ps1|functions\Install-DbaWatchUpdate.ps1|functions\Install-DbaWhoIsActive.ps1|functions\Invoke-DbaAdvancedRestore.ps1|functions\Invoke-DbaAgFailover.ps1|functions\Invoke-DbaBalanceDataFiles.ps1|functions\Invoke-DbaCycleErrorLog.ps1|functions\Invoke-DbaDbccFreeCache.ps1|functions\Invoke-DbaDbClone.ps1|functions\Invoke-DbaDbDecryptObject.ps1|functions\Invoke-DbaDbLogShipping.ps1|functions\Invoke-DbaDbLogShipRecovery.ps1|functions\Invoke-DbaDbMirrorFailover.ps1|functions\Invoke-DbaDbMirroring.ps1|functions\Invoke-DbaDbShrink.ps1|functions\Invoke-DbaDbUpgrade.ps1|functions\Invoke-DbaDiagnosticQuery.ps1|functions\Invoke-DbaPfRelog.ps1|functions\Invoke-DbaQuery.ps1|functions\Invoke-DbatoolsFormatter.ps1|functions\Invoke-DbatoolsRenameHelper.ps1|functions\Invoke-DbaWhoisActive.ps1|functions\Invoke-DbaXEReplay.ps1|functions\Invoke-SqlCmd2.ps1|functions\Join-DbaAvailabilityGroup.ps1|functions\Measure-DbaBackupThroughput.ps1|functions\Measure-DbaDiskSpaceRequirement.ps1|functions\Measure-DbatoolsImport.ps1|functions\Mount-DbaDatabase.ps1|functions\Move-DbaCmsRegServer.ps1|functions\Move-DbaCmsRegServerGroup.ps1|functions\New-DbaAgentJob.ps1|functions\New-DbaAgentJobCategory.ps1|functions\New-DbaAgentJobStep.ps1|functions\New-DbaAgentProxy.ps1|functions\New-DbaAgentSchedule.ps1|functions\New-DbaAvailabilityGroup.ps1|functions\New-DbaClientAlias.ps1|functions\New-DbaCmConnection.ps1|functions\New-DbaComputerCertificate.ps1|functions\New-DbaConnectionString.ps1|functions\New-DbaConnectionStringBuilder.ps1|functions\New-DbaCredential.ps1|functions\New-DbaDacOption.ps1|functions\New-DbaDacProfile.ps1|functions\New-DbaDatabase.ps1|functions\New-DbaDbCertificate.ps1|functions\New-DbaDbMasterKey.ps1|functions\New-DbaDbSnapshot.ps1|functions\New-DbaDbUser.ps1|functions\New-DbaDirectory.ps1|functions\New-DbaEndpoint.ps1|functions\New-DbaLogin.ps1|functions\New-DbaScriptingOption.ps1|functions\New-DbaServiceMasterKey.ps1|functions\New-DbaSsisCatalog.ps1|functions\New-DbatoolsSupportPackage.ps1|functions\New-DbaXESession.ps1|functions\New-DbaXESmartCsvWriter.ps1|functions\New-DbaXESmartEmail.ps1|functions\New-DbaXESmartQueryExec.ps1|functions\New-DbaXESmartReplay.ps1|functions\New-DbaXESmartTableWriter.ps1|functions\Publish-DbaDacPackage.ps1|functions\Read-DbaAuditFile.ps1|functions\Read-DbaBackupHeader.ps1|functions\Read-DbaTraceFile.ps1|functions\Read-DbaTransactionLog.ps1|functions\Read-DbaXEFile.ps1|functions\Remove-DbaAgDatabase.ps1|functions\Remove-DbaAgentJob.ps1|functions\Remove-DbaAgentJobCategory.ps1|functions\Remove-DbaAgentJobStep.ps1|functions\Remove-DbaAgentSchedule.ps1|functions\Remove-DbaAgListener.ps1|functions\Remove-DbaAgReplica.ps1|functions\Remove-DbaAvailabilityGroup.ps1|functions\Remove-DbaBackup.ps1|functions\Remove-DbaClientAlias.ps1|functions\Remove-DbaCmConnection.ps1|functions\Remove-DbaCmsRegServer.ps1|functions\Remove-DbaCmsRegServerGroup.ps1|functions\Remove-DbaComputerCertificate.ps1|functions\Remove-DbaDatabase.ps1|functions\Remove-DbaDatabaseSafely.ps1|functions\Remove-DbaDbBackupRestoreHistory.ps1|functions\Remove-DbaDbCertificate.ps1|functions\Remove-DbaDbMasterKey.ps1|functions\Remove-DbaDbMirror.ps1|functions\Remove-DbaDbMirrorMonitor.ps1|functions\Remove-DbaDbSnapshot.ps1|functions\Remove-DbaDbUser.ps1|functions\Remove-DbaEndpoint.ps1|functions\Remove-DbaLogin.ps1|functions\Remove-DbaNetworkCertificate.ps1|functions\Remove-DbaOrphanUser.ps1|functions\Remove-DbaPfDataCollectorCounter.ps1|functions\Remove-DbaPfDataCollectorSet.ps1|functions\Remove-DbaSpn.ps1|functions\Remove-DbaTrace.ps1|functions\Remove-DbaXESession.ps1|functions\Remove-DbaXESmartTarget.ps1|functions\Rename-DbaDatabase.ps1|functions\Rename-DbaLogin.ps1|functions\Repair-DbaDbMirror.ps1|functions\Repair-DbaOrphanUser.ps1|functions\Repair-DbaServerName.ps1|functions\Reset-DbaAdmin.ps1|functions\Resolve-DbaNetworkName.ps1|functions\Restart-DbaService.ps1|functions\Restore-DbaBackupFromDirectory.ps1|functions\Restore-DbaDatabase.ps1|functions\Restore-DbaDbCertificate.ps1|functions\Restore-DbaDbSnapshot.ps1|functions\Resume-DbaAgDbDataMovement.ps1|functions\Revoke-DbaAgPermission.ps1|functions\Save-DbaDiagnosticQueryScript.ps1|functions\Select-DbaBackupInformation.ps1|functions\Set-DbaAgentAlert.ps1|functions\Set-DbaAgentJob.ps1|functions\Set-DbaAgentJobCategory.ps1|functions\Set-DbaAgentJobOutputFile.ps1|functions\Set-DbaAgentJobOwner.ps1|functions\Set-DbaAgentJobStep.ps1|functions\Set-DbaAgentSchedule.ps1|functions\Set-DbaAgentServer.ps1|functions\Set-DbaAgListener.ps1|functions\Set-DbaAgReplica.ps1|functions\Set-DbaAvailabilityGroup.ps1|functions\Set-DbaCmConnection.ps1|functions\Set-DbaDbCompatibility.ps1|functions\Set-DbaDbCompression.ps1|functions\Set-DbaDbMirror.ps1|functions\Set-DbaDbOwner.ps1|functions\Set-DbaDbQueryStoreOption.ps1|functions\Set-DbaDbRecoveryModel.ps1|functions\Set-DbaDbState.ps1|functions\Set-DbaEndpoint.ps1|functions\Set-DbaErrorLogConfig.ps1|functions\Set-DbaLogin.ps1|functions\Set-DbaMaxDop.ps1|functions\Set-DbaMaxMemory.ps1|functions\Set-DbaNetworkCertificate.ps1|functions\Set-DbaPowerPlan.ps1|functions\Set-DbaPrivilege.ps1|functions\Set-DbaSpConfigure.ps1|functions\Set-DbaSpn.ps1|functions\Set-DbaStartupParameter.ps1|functions\Set-DbaTcpPort.ps1|functions\Set-DbaTempDbConfig.ps1|functions\Show-DbaDbList.ps1|functions\Show-DbaServerFileSystem.ps1|functions\Start-DbaAgentJob.ps1|functions\Start-DbaEndpoint.ps1|functions\Start-DbaMigration.ps1|functions\Start-DbaPfDataCollectorSet.ps1|functions\Start-DbaService.ps1|functions\Start-DbaTrace.ps1|functions\Start-DbaXESession.ps1|functions\Start-DbaXESmartTarget.ps1|functions\Stop-DbaAgentJob.ps1|functions\Stop-DbaEndpoint.ps1|functions\Stop-DbaPfDataCollectorSet.ps1|functions\Stop-DbaProcess.ps1|functions\Stop-DbaService.ps1|functions\Stop-DbaTrace.ps1|functions\Stop-DbaXESession.ps1|functions\Stop-DbaXESmartTarget.ps1|functions\Suspend-DbaAgDbDataMovement.ps1|functions\Sync-DbaAvailabilityGroup.ps1|functions\Sync-DbaLoginPermission.ps1|functions\Test-DbaBackupInformation.ps1|functions\Test-DbaBuild.ps1|functions\Test-DbaCmConnection.ps1|functions\Test-DbaConnection.ps1|functions\Test-DbaConnectionAuthScheme.ps1|functions\Test-DbaDbCollation.ps1|functions\Test-DbaDbCompatibility.ps1|functions\Test-DbaDbCompression.ps1|functions\Test-DbaDbLogShipStatus.ps1|functions\Test-DbaDbOwner.ps1|functions\Test-DbaDbRecoveryModel.ps1|functions\Test-DbaDbVirtualLogFile.ps1|functions\Test-DbaDeprecatedFeature.ps1|functions\Test-DbaDiskAlignment.ps1|functions\Test-DbaDiskAllocation.ps1|functions\Test-DbaDiskSpeed.ps1|functions\Test-DbaEndpoint.ps1|functions\Test-DbaIdentityUsage.ps1|functions\Test-DbaJobOwner.ps1|functions\Test-DbaLastBackup.ps1|functions\Test-DbaLinkedServerConnection.ps1|functions\Test-DbaLoginPassword.ps1|functions\Test-DbaManagementObject.ps1|functions\Test-DbaMaxDop.ps1|functions\Test-DbaMaxMemory.ps1|functions\Test-DbaMigrationConstraint.ps1|functions\Test-DbaNetworkLatency.ps1|functions\Test-DbaOptimizeForAdHoc.ps1|functions\Test-DbaPath.ps1|functions\Test-DbaPowerPlan.ps1|functions\Test-DbaRepLatency.ps1|functions\Test-DbaServerName.ps1|functions\Test-DbaSpn.ps1|functions\Test-DbaTempDbConfig.ps1|functions\Test-DbaWindowsLogin.ps1|functions\Uninstall-DbaSqlWatch.ps1|functions\Uninstall-DbaWatchUpdate.ps1|functions\Update-DbaInstance.ps1|functions\Update-DbaServiceAccount.ps1|functions\Update-dbatools.ps1|functions\Watch-DbaDbLogin.ps1|functions\Watch-DbaUpdate.ps1|functions\Watch-DbaXESession.ps1|functions\Write-DbaDataTable.ps1|functions\configuration\Export-DbatoolsConfig.ps1|functions\configuration\Get-DbatoolsConfig.ps1|functions\configuration\Get-DbatoolsConfigValue.ps1|functions\configuration\Import-DbatoolsConfig.ps1|functions\configuration\Register-DbatoolsConfig.ps1|functions\configuration\Reset-DbatoolsConfig.ps1|functions\configuration\Unregister-DbatoolsConfig.ps1|internal\configurations\configuration.ps1|internal\configurations\settings\assets.ps1|internal\configurations\settings\commands.ps1|internal\configurations\settings\computermanagement.ps1|internal\configurations\settings\formatting.ps1|internal\configurations\settings\import.ps1|internal\configurations\settings\logging.ps1|internal\configurations\settings\paths.ps1|internal\configurations\settings\remoting.ps1|internal\configurations\settings\sql.ps1|internal\configurations\settings\tabexpansion.ps1|internal\configurations\settings\userinteraction.ps1|internal\configurations\validation\bool.ps1|internal\configurations\validation\consolecolor.ps1|internal\configurations\validation\datetime.ps1|internal\configurations\validation\double.ps1|internal\configurations\validation\integer.ps1|internal\configurations\validation\integer0to9.ps1|internal\configurations\validation\integerpositive.ps1|internal\configurations\validation\long.ps1|internal\configurations\validation\sizestyle.ps1|internal\configurations\validation\string.ps1|internal\configurations\validation\timespan.ps1|internal\dynamicparams\alert.ps1|internal\dynamicparams\alertcategory.ps1|internal\dynamicparams\audit.ps1|internal\dynamicparams\auditspecification.ps1|internal\dynamicparams\availabilitygroup.ps1|internal\dynamicparams\backupdevice.ps1|internal\dynamicparams\config.ps1|internal\dynamicparams\configname.ps1|internal\dynamicparams\credential.ps1|internal\dynamicparams\customerror.ps1|internal\dynamicparams\database.ps1|internal\dynamicparams\delimiter.ps1|internal\dynamicparams\endpoint.ps1|internal\dynamicparams\group.ps1|internal\dynamicparams\instanceproperty.ps1|internal\dynamicparams\job.ps1|internal\dynamicparams\jobcategory.ps1|internal\dynamicparams\linkedserver.ps1|internal\dynamicparams\login.ps1|internal\dynamicparams\mailaccount.ps1|internal\dynamicparams\mailprofile.ps1|internal\dynamicparams\mailserver.ps1|internal\dynamicparams\operator.ps1|internal\dynamicparams\operatorcategory.ps1|internal\dynamicparams\perfmontemplate.ps1|internal\dynamicparams\powerplan.ps1|internal\dynamicparams\processHostname.ps1|internal\dynamicparams\processProgram.ps1|internal\dynamicparams\processSpid.ps1|internal\dynamicparams\proxyaccount.ps1|internal\dynamicparams\resourcepool.ps1|internal\dynamicparams\schedule.ps1|internal\dynamicparams\servertrigger.ps1|internal\dynamicparams\session.ps1|internal\dynamicparams\snapshot.ps1|internal\dynamicparams\sqlinstance.ps1|internal\dynamicparams\tag.ps1|internal\dynamicparams\xesessiontemplate.ps1|internal\functions\Connect-AsServer.ps1|internal\functions\Connect-ReplicationDB.ps1|internal\functions\Connect-SqlInstance.ps1|internal\functions\Convert-ByteToHexString.ps1|internal\functions\Convert-DbaLsn.ps1|internal\functions\Convert-DbaTimelineStatusColor.ps1|internal\functions\Convert-DbVersionToSqlVersion.ps1|internal\functions\Convert-HexStringToByte.ps1|internal\functions\ConvertTo-JsDate.ps1|internal\functions\Disconnect-Regserver.ps1|internal\functions\Find-SqlServerUpdate.ps1|internal\functions\Get-BackupAncientHistory.ps1|internal\functions\Get-CodePage.ps1|internal\functions\Get-DbaADObject.ps1|internal\functions\Get-DbaDbPhysicalFile.ps1|internal\functions\Get-DbaFileStreamFolder.ps1|internal\functions\Get-DbaPathSep.ps1|internal\functions\Get-DbaReportingService.ps1|internal\functions\Get-DBAServiceErrorMessage.ps1|internal\functions\Get-DbaSysDbUserObjectScript.ps1|internal\functions\Get-DecryptedObject.ps1|internal\functions\Get-DirectoryRestoreFile.ps1|internal\functions\Get-ErrorMessage.ps1|internal\functions\Get-InternalService.ps1|internal\functions\Get-JobList.ps1|internal\functions\Get-Language.ps1|internal\functions\Get-OfflineSqlFileStructure.ps1|internal\functions\Get-PasswordHash.ps1|internal\functions\Get-RegServerGroupReverseParse.ps1|internal\functions\Get-RegServerParent.ps1|internal\functions\Get-ResourceState.ps1|internal\functions\Get-RestoreContinuableDatabase.ps1|internal\functions\Get-SaLoginName.ps1|internal\functions\Get-SmoServerForDynamicParams.ps1|internal\functions\Get-SqlCmdVars.ps1|internal\functions\Get-SqlDefaultPaths.ps1|internal\functions\Get-SqlDefaultSpConfigure.ps1|internal\functions\Get-SqlFileStructure.ps1|internal\functions\Get-SqlInstanceComponent.ps1|internal\functions\Get-SqlSaLogin.ps1|internal\functions\Get-SqlServerUpdate.ps1|internal\functions\Get-TableNameParts.ps1|internal\functions\Get-WmiHadr.ps1|internal\functions\Get-XpDirTreeRestoreFile.ps1|internal\functions\Import-DbaCmdlet.ps1|internal\functions\Initialize-CredSSP.ps1|internal\functions\Invoke-Alter.ps1|internal\functions\Invoke-Command2.ps1|internal\functions\Invoke-Create.ps1|internal\functions\Invoke-DbaAsync.ps1|internal\functions\Invoke-DbaDatabaseCorruption.ps1|internal\functions\Invoke-DbaDiagnosticQueryScriptParser.ps1|internal\functions\Invoke-DbMirrorValidation.ps1|internal\functions\Invoke-ManagedComputerCommand.ps1|internal\functions\Invoke-Program.ps1|internal\functions\Invoke-SmoCheck.ps1|internal\functions\Invoke-TagCommand.ps1|internal\functions\Invoke-TlsWebRequest.ps1|internal\functions\Join-AdminUnc.ps1|internal\functions\Join-SomePath.ps1|internal\functions\New-DbaLogShippingPrimaryDatabase.ps1|internal\functions\New-DbaLogShippingPrimarySecondary.ps1|internal\functions\New-DbaLogShippingSecondaryDatabase.ps1|internal\functions\New-DbaLogShippingSecondaryPrimary.ps1|internal\functions\Register-RemoteSessionConfiguration.ps1|internal\functions\Remove-InvalidFileNameChars.ps1|internal\functions\Resolve-IpAddress.ps1|internal\functions\Resolve-NetBiosName.ps1|internal\functions\Resolve-SqlIpAddress.ps1|internal\functions\Restart-WinRMService.ps1|internal\functions\Select-DefaultView.ps1|internal\functions\Set-ServiceStartMode.ps1|internal\functions\Set-WmiFilestreamSetting.ps1|internal\functions\Show-Notification.ps1|internal\functions\Start-DbccCheck.ps1|internal\functions\Test-ComputerTarget.ps1|internal\functions\Test-DbaLsnChain.ps1|internal\functions\Test-DbaRestoreVersion.ps1|internal\functions\Test-HostOSLinux.ps1|internal\functions\Test-PendingReboot.ps1|internal\functions\Test-PSRemoting.ps1|internal\functions\Test-SqlAgent.ps1|internal\functions\Test-SqlLoginAccess.ps1|internal\functions\Test-SqlQueryComplete.ps1|internal\functions\Test-SqlSa.ps1|internal\functions\Unregister-RemoteSessionConfiguration.ps1|internal\functions\Update-ServiceStatus.ps1|internal\functions\Update-SqlDbOwner.ps1|internal\functions\Update-SqlDbReadOnly.ps1|internal\functions\Update-SqlPermission.ps1|internal\functions\Where-DbaObject.ps1|internal\functions\Write-ProgressHelper.ps1|internal\functions\configuration\Read-DbatoolsConfigFile.ps1|internal\functions\configuration\Read-DbatoolsConfigPersisted.ps1|internal\functions\configuration\Register-DbatoolsConfigValidation.ps1|internal\functions\configuration\Write-DbatoolsConfigFile.ps1|internal\functions\flowcontrol\Invoke-Parallel.ps1|internal\functions\flowcontrol\Invoke-SteppablePipeline.ps1|internal\functions\flowcontrol\Stop-Function.ps1|internal\functions\flowcontrol\Test-Bound.ps1|internal\functions\flowcontrol\Test-DbaDeprecation.ps1|internal\functions\flowcontrol\Test-ElevationRequirement.ps1|internal\functions\flowcontrol\Test-FunctionInterrupt.ps1|internal\functions\flowcontrol\Test-Windows.ps1|internal\functions\message\Convert-DbaMessageException.ps1|internal\functions\message\Convert-DbaMessageLevel.ps1|internal\functions\message\Convert-DbaMessageTarget.ps1|internal\functions\message\Get-DbaMessageLevelModifier.ps1|internal\functions\message\New-DbaMessageLevelModifier.ps1|internal\functions\message\Register-DbaMessageEvent.ps1|internal\functions\message\Register-DbaMessageTransform.ps1|internal\functions\message\Remove-DbaMessageLevelModifier.ps1|internal\functions\message\Write-HostColor.ps1|internal\functions\runspaces\Get-DbaRunspace.ps1|internal\functions\runspaces\Register-DbaMaintenanceTask.ps1|internal\functions\runspaces\Register-DbaRunspace.ps1|internal\functions\runspaces\Start-DbaRunspace.ps1|internal\functions\runspaces\Stop-DbaRunspace.ps1|internal\functions\tabcompletion\New-DbaTeppCompletionResult.ps1|internal\functions\tabcompletion\Register-DbaTeppArgumentCompleter.ps1|internal\functions\tabcompletion\Register-DbaTeppInstanceCacheBuilder.ps1|internal\functions\tabcompletion\Register-DbaTeppScriptBlock.ps1|internal\functions\utility\Join-DbaPath.ps1|internal\functions\utility\Resolve-DbaPath.ps1|internal\maintenance\PSSession-Cleanup.ps1|internal\maintenance\tempcleanup.ps1|internal\maintenance\teppInsertTask.ps1|internal\scripts\cmdlets.ps1|internal\scripts\dbatools-maintenance.ps1|internal\scripts\insertTepp.ps1|internal\scripts\logfilescript.ps1|internal\scripts\message-transforms.ps1|internal\scripts\smoLibraryImport.ps1|internal\scripts\updateTeppAsync.ps1|optional\Compress-Archive.ps1|optional\Expand-Archive.ps1|optional\Get-GenericArgumentCompleter.ps1|optional\TabExpansionPlusPlus.ps1|xml\dbatools.Format.ps1xml|xml\dbatools.Types.ps1xml</S>
          <S N="GUID">9d139310-ce45-41ce-8e8b-d76335aa1789</S>
          <S N="PowerShellVersion">3.0</S>
          <S N="CompanyName">dbatools.io</S>
        </MS>
      </Obj>
      <S N="InstalledLocation">C:\Users\appveyor\AppData\Local\Temp\1\8309ab5c-ddeb-4850-90b1-6b8074c7383c\dbatools\0.9.711</S>
    </MS>
  </Obj>
</Objs>

tools\dbatools\readme.md

# dbatools

<img align="left" src=https://blog.netnerds.net/wp-content/uploads/2016/05/dbatools.png alt="dbatools logo">  dbatools is sort of like a command-line SQL Server Management Studio. The project initially started out as Start-SqlMigration.ps1, but has now grown into a collection of [over 500 commands](https://dbatools.io/commands) that help automate SQL Server tasks and encourage best practices.

Got ideas for new commands? Please propose them as [issues](https://dbatools.io/issues) and let us know what you'd like to see. Bug reports should also be filed under this repository's [issues](https://github.com/sqlcollaborative/dbatools/issues) section.

There's also over 1500 of us on the [SQL Server Community Slack](https://sqlcommunity.slack.com) in the #dbatools channel. Need an invite? Check out the [self-invite page](https://dbatools.io/slack/). Drop by if you'd like to chat about dbatools or even [join the team](https://dbatools.io/team)!

## Installer

dbatools now works on PowerShell Core (aka PowerShell 6+). This means that you can run a large majority of our commands on <strong>Linux</strong> and <strong>macoS </strong>🤩👍

Run the following from an administrative prompt to install dbatools from the PowerShell Gallery:
```powershell
Install-Module dbatools
```

Or if you don't have a version of PowerShell that supports the Gallery, you can install it manually:
```powershell
Invoke-Expression (Invoke-WebRequest https://dbatools.io/in)
```

Note: please only use `Invoke-Expression (Invoke-WebRequest..)` from sources you trust, like us 👍

## Usage scenarios

In addition to the simple things you can do in SSMS (like starting a job), we've also read a whole bunch of docs and came up with commands that do nifty things quickly.

* Lost sysadmin access and need to regain entry to your SQL Server? Use [Reset-DbaAdmin](http://dbatools.io/Reset-DbaAdmin).
* Need to easily test your backups? Use [Test-DbaLastBackup](http://dbatools.io/Test-DbaLastBackup).
* SPN management got you down? Use [our suite of SPN commands](http://dbatools.io/schwifty) to find which SPNs are missing and easily add them.
* Got so many databases you can't keep track? Congrats on your big ol' environment! Use [Find-DbaDatabase](http://dbatools.io/Find-DbaDatabase) to easily find your database.

## Usage examples

As previously mentioned, dbatools now offers [over 400 commands](https://dbatools.io/commands)! [Here are some of the ones we highlight at conferences](https://gist.github.com/potatoqualitee/e8932b64aeb6ef404e252d656b6318a2) - PowerShell v3 and above required. (See below for important information about alternative logins and specifying SQL Server ports).

```powershell
# Set some vars
$new = "localhost\sql2016"
$old = $instance = "localhost"
$allservers = $old, $new

# Alternatively, use Registered Servers
$allservers = Get-DbaCmsRegServer -SqlInstance $instance

# Need to restore a database? It can be as simple as this:
Restore-DbaDatabase -SqlInstance $instance -Path "C:\temp\AdventureWorks2012-Full Database Backup.bak"

# Use Ola Hallengren's backup script? We can restore an *ENTIRE INSTANCE* with just one line
Get-ChildItem -Directory \\workstation\backups\sql2012 | Restore-DbaDatabase -SqlInstance $new

# What about if you need to make a backup? And you are logging in with alternative credentials?
Get-DbaDatabase -SqlInstance $new -SqlCredential sqladmin | Backup-DbaDatabase

# Testing your backups is crazy easy!
Start-Process https://dbatools.io/Test-DbaLastBackup
Test-DbaLastBackup -SqlInstance $old | Out-GridView

# But what if you want to test your backups on a different server?
Test-DbaLastBackup -SqlInstance $old -Destination $new | Out-GridView

# Nowadays, we don't just backup databases. Now, we're backing up logins
Export-DbaLogin -SqlInstance $instance -Path C:\temp\logins.sql
Invoke-Item C:\temp\logins.sql

# And Agent Jobs
Get-DbaAgentJob -SqlInstance $old | Export-DbaScript -Path C:\temp\jobs.sql

# What if you just want to script out your restore?
Get-ChildItem -Directory \\workstation\backups\subset\ | Restore-DbaDatabase -SqlInstance $new -OutputScriptOnly -WithReplace | Out-File -Filepath c:\temp\restore.sql
Invoke-Item c:\temp\restore.sql

# You've probably heard about how easy migrations can be with dbatools. Here's an example
$startDbaMigrationSplat = @{
    Source = $old
    Destination = $new
    BackupRestore = $true
    SharedPath = 'C:\temp'
    NoSysDbUserObjects = $true
    NoCredentials = $true
    NoBackupDevices = $true
    NoEndPoints = $true
}

Start-DbaMigration @startDbaMigrationSplat -Force | Select * | Out-GridView

# Know how snapshots used to be a PITA? Now they're super easy
New-DbaDbSnapshot -SqlInstance $new -Database db1 -Name db1_snapshot
Get-DbaDbSnapshot -SqlInstance $new
Get-DbaProcess -SqlInstance $new -Database db1 | Stop-DbaProcess
Restore-DbaFromDatabaseSnapshot -SqlInstance $new -Database db1 -Snapshot db1_snapshot
Remove-DbaDbSnapshot -SqlInstance $new -Snapshot db1_snapshot # or -Database db1

# Have you tested your last good DBCC CHECKDB? We've got a command for that
$old | Get-DbaLastGoodCheckDb | Out-GridView

# Here's how you can find your integrity jobs and easily start them. Then, you can watch them run, and finally check your newest DBCC CHECKDB results
$old | Get-DbaAgentJob | Where Name -match integrity | Start-DbaAgentJob
$old | Get-DbaRunningJob
$old | Get-DbaLastGoodCheckDb | Out-GridView

# Our new build website is super useful!
Start-Process https://dbatools.io/builds

# You can use the same JSON the website uses to check the status of your own environment
$allservers | Get-DbaBuildReference

# We evaluated 37,545 SQL Server stored procedures on 9 servers in 8.67 seconds!
$new | Find-DbaStoredProcedure -Pattern dbatools

# Have an employee who is leaving? Find all of their objects.
$allservers | Find-DbaUserObject -Pattern ad\jdoe | Out-GridView

# Find detached databases, by example
Detach-DbaDatabase -SqlInstance $instance -Database AdventureWorks2012
Find-DbaOrphanedFile -SqlInstance $instance | Out-GridView

# Check out how complete our sp_configure command is
Get-DbaSpConfigure -SqlInstance $new | Out-GridView

# Easily update configuration values
Set-DbaSpConfigure -SqlInstance $new -ConfigName XPCmdShellEnabled -Value $true

# DB Cloning too!
Invoke-DbaDbClone -SqlInstance $new -Database db1 -CloneDatabase db1_clone | Out-GridView

# Read and watch XEvents
Get-DbaXESession -SqlInstance $new -Session system_health | Read-DbaXEFile
Get-DbaXESession -SqlInstance $new -Session system_health | Read-DbaXEFile | Select -ExpandProperty Fields | Out-GridView

# Reset-DbaAdmin
Reset-DbaAdmin -SqlInstance $instance -Login sqladmin -Verbose
Get-DbaDatabase -SqlInstance $instance -SqlCredential sqladmin

# sp_whoisactive
Install-DbaWhoIsActive -SqlInstance $instance -Database master
Invoke-DbaWhoIsActive -SqlInstance $instance -ShowOwnSpid -ShowSystemSpids

# Diagnostic query!
$instance | Invoke-DbaDiagnosticQuery -UseSelectionHelper | Export-DbaDiagnosticQuery -Path $home
Invoke-Item $home

# Ola, yall
$instance | Install-DbaMaintenanceSolution -ReplaceExisting -BackupLocation C:\temp -InstallJobs

# Startup parameters
Get-DbaStartupParameter -SqlInstance $instance
Set-DbaStartupParameter -SqlInstance $instance -SingleUser -WhatIf

# Database clone
Invoke-DbaDbClone -SqlInstance $new -Database dbwithsprocs -CloneDatabase dbwithsprocs_clone

# Schema change and Pester tests
Get-DbaSchemaChangeHistory -SqlInstance $new -Database tempdb

# Get Db Free Space AND write it to table
Get-DbaDbSpace -SqlInstance $instance | Out-GridView
Get-DbaDbSpace -SqlInstance $instance -IncludeSystemDB | ConvertTo-DbaDataTable | Write-DbaDataTable -SqlInstance $instance -Database tempdb -Table DiskSpaceExample -AutoCreateTable
Invoke-DbaQuery -SqlInstance $instance -Database tempdb -Query 'SELECT * FROM dbo.DiskSpaceExample' | Out-GridView

# History
Get-Command -Module dbatools *history*

# Identity usage
Test-DbaIdentityUsage -SqlInstance $instance | Out-GridView

# Test/Set SQL max memory
$allservers | Get-DbaMaxMemory
$allservers | Test-DbaMaxMemory | Format-Table
$allservers | Test-DbaMaxMemory | Where-Object { $_.SqlMaxMB -gt $_.TotalMB } | Set-DbaMaxMemory -WhatIf
Set-DbaMaxMemory -SqlInstance $instance -MaxMb 1023

# Testing sql server linked server connections
Test-DbaLinkedServerConnection -SqlInstance $instance

# See protocols
Get-DbaServerProtocol -ComputerName $instance | Out-GridView

# Reads trace files - default trace by default
Read-DbaTraceFile -SqlInstance $instance | Out-GridView

# don't have remoting access? Explore the filesystem. Uses master.sys.xp_dirtree
Get-DbaFile -SqlInstance $instance

# Test your SPNs and see what'd happen if you'd set them
$servers | Test-DbaSpn | Out-GridView
$servers | Test-DbaSpn | Out-GridView -PassThru | Set-DbaSpn -WhatIf

# Get Virtual Log File information
Get-DbaDbVirtualLogFile -SqlInstance $new -Database db1
Get-DbaDbVirtualLogFile -SqlInstance $new -Database db1 | Measure-Object

```

## Important Note

#### Alternative SQL Credentials

By default, all SQL-based commands will login to SQL Server using Trusted/Windows Authentication. To use alternative credentials, including SQL Logins or alternative Windows credentials, use the `-SqlCredential`. This parameter accepts the results of `Get-Credential` which generates a [PSCredential](https://docs.microsoft.com/en-us/powershell/module/microsoft.powershell.security/get-credential?view=powershell-5.1) object.

```powershell
Get-DbaDatabase -SqlInstance sql2017 -SqlCredential sqladmin
```

<a href="https://dbatools.io/wp-content/uploads/2016/05/cred.jpg"><img class="aligncenter size-full wp-image-6897" src="https://dbatools.io/wp-content/uploads/2016/05/cred.jpg" alt="" width="322" height="261" /></a>

A few (or maybe just one - [Restore-DbaDatabase](/Restore-DbaDatabase)), you can also use `-AzureCredential`.

#### Alternative Windows Credentials

For commands that access Windows such as [Get-DbaDiskSpace](/Get-DbaDiskSpace), you will pass the `-Credential` parameter.

```powershell
$cred = Get-Credential ad\winadmin
Get-DbaDiskSpace -ComputerName sql2017 -Credential $cred
```

To store credentials to disk, please read more at [Jaap Brasser's blog](https://www.jaapbrasser.com/quickly-and-securely-storing-your-credentials-powershell/).

#### Servers with custom ports

If you use non-default ports and SQL Browser is disabled, you can access servers using a semicolon (functionality we've added) or a comma (the way Microsoft does it).

```powershell
-SqlInstance sql2017:55559
-SqlInstance 'sql2017,55559'
```

Note that PowerShell sees commas as arrays, so you must surround the host name with quotes.

## Support

dbatools aims to support as many configurations as possible, including

* PowerShell v3 and above
* Windows, macOS and Linux
* SQL Server 2000 - 2017
* Express - Datacenter Edition
* Clustered and stand-alone instances
* Windows and SQL authentication
* Default and named instances
* Multiple instances on one server
* Auto-populated parameters for command-line completion (think -Database and -Login)

Read more at our website at [dbatools.io](https://dbatools.io)

## Contributing

Want to contribute to the project? We'd love to have you! Visit our [contributing.md](https://github.com/sqlcollaborative/dbatools/blob/master/contributing.md) for a jump start.

tools\dbatools\xml\dbatools.Format.ps1xml

tools\dbatools\xml\dbatools.Types.ps1xml

tools\LICENSE.txt

From: https://raw.githubusercontent.com/sqlcollaborative/dbatools/master/LICENSE

LICENSE

MIT License

Copyright (c) 2018 Chrissy LeMaire

Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all
copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE.

tools\VERIFICATION.txt

VERIFICATION
Verification is intended to assist the Chocolatey moderators and community in verifying that this package's contents are trustworthy.

To verify the files using the project source:

1. Please go to the project source location (https://github.com/sqlcollaborative/dbatools) and download the source files;
2. Build the source to create the binary files to verify;
3. Use Get-FileHash -Path <FILE TO VERIFY> to get the file hash value from both the built file (from step 1 above) and the file from the package and compare them;

Alternatively you can download the module from the PowerShell Gallery ...

    Save-Module -Name dbatools -Path <PATH TO DOWNLOAD TO>

... and compare the files from the package against those in the installed module. Again use Get-FileHash -Path <FILE TO VERIFY> to retrieve those hash values.

tools\dbatools\optional\Get-GenericArgumentCompleter.ps1

if (-not (Get-Command -Name Register-ArgumentCompleter -ErrorAction Ignore)) {
    Function Get-GenericArgumentCompleter {
        param (
            [string]$name,
            [object]$collection
        )

        Register-ArgumentCompleter -ParameterName $name -ScriptBlock {
            param (
                $commandName,
                $parameterName,
                $wordToComplete,
                $commandAst,
                $fakeBoundParameter
            )

            if ($collection) {
                foreach ($item in $collection) {
                    New-CompletionResult -CompletionText $item -ToolTip $item
                }
            }
        }
    }
}

Virus Scan Results

dbatools.0.9.711.nupkg (3e2651462662) - ## / 60

In cases where actual malware is found, the packages are subject to removal. Software sometimes has false positives. Moderators do not necessarily validate the safety of the underlying software, only that a package retrieves software from the official distribution point and/or validate embedded software against official distribution point (where distribution rights allow redistribution).

Chocolatey Pro provides runtime protection from possible malware.

Version History

Version	Downloads	Last Updated	Status
dbatools (PowerShell Module) 2.1.14	5	Friday, April 12, 2024	Waiting for Maintainer
dbatools (PowerShell Module) 2.1.13	446	Friday, April 12, 2024	Approved
dbatools (PowerShell Module) 2.1.12	567	Saturday, March 30, 2024	Approved
dbatools (PowerShell Module) 2.1.11	607	Saturday, March 16, 2024	Approved
dbatools (PowerShell Module) 2.1.10	333	Saturday, March 9, 2024	Approved
dbatools (PowerShell Module) 2.1.9	42	Saturday, March 9, 2024	Approved
dbatools (PowerShell Module) 2.1.8	634	Thursday, February 22, 2024	Approved
dbatools (PowerShell Module) 2.1.6	1078	Friday, December 22, 2023	Approved
dbatools (PowerShell Module) 2.1.5	899	Sunday, November 5, 2023	Approved
dbatools (PowerShell Module) 2.1.4	660	Saturday, October 14, 2023	Approved
dbatools (PowerShell Module) 2.1.3	282	Wednesday, October 11, 2023	Approved
dbatools (PowerShell Module) 2.1.2	430	Wednesday, October 4, 2023	Approved
dbatools (PowerShell Module) 2.1.1	415	Friday, September 29, 2023	Approved
dbatools (PowerShell Module) 2.1.0	514	Thursday, September 21, 2023	Approved
dbatools (PowerShell Module) 2.0.4	2318	Friday, June 9, 2023	Approved
dbatools (PowerShell Module) 1.1.145	5874	Friday, January 27, 2023	Approved
dbatools (PowerShell Module) 1.1.144	227	Thursday, January 26, 2023	Approved
dbatools (PowerShell Module) 1.1.143	1844	Thursday, November 17, 2022	Approved
dbatools (PowerShell Module) 1.1.142	1136	Sunday, October 23, 2022	Approved
dbatools (PowerShell Module) 1.1.141	142	Friday, October 21, 2022	Approved
dbatools (PowerShell Module) 1.1.140	319	Monday, October 17, 2022	Approved
dbatools (PowerShell Module) 1.1.139	472	Tuesday, October 11, 2022	Approved
dbatools (PowerShell Module) 1.1.138	270	Tuesday, October 11, 2022	Approved
dbatools (PowerShell Module) 1.1.137	345	Thursday, October 6, 2022	Approved
dbatools (PowerShell Module) 1.1.136	390	Friday, September 30, 2022	Approved
dbatools (PowerShell Module) 1.1.134	494	Wednesday, September 21, 2022	Approved
dbatools (PowerShell Module) 1.1.133	298	Saturday, September 17, 2022	Approved
dbatools (PowerShell Module) 1.1.132	529	Friday, September 9, 2022	Approved
dbatools (PowerShell Module) 1.1.131	140	Friday, September 9, 2022	Approved
dbatools (PowerShell Module) 1.1.130	181	Wednesday, September 7, 2022	Approved
dbatools (PowerShell Module) 1.1.129	261	Monday, September 5, 2022	Approved
dbatools (PowerShell Module) 1.1.128	370	Tuesday, August 30, 2022	Approved
dbatools (PowerShell Module) 1.1.127	347	Wednesday, August 24, 2022	Approved
dbatools (PowerShell Module) 1.1.126	359	Friday, August 19, 2022	Approved
dbatools (PowerShell Module) 1.1.125	291	Tuesday, August 16, 2022	Approved
dbatools (PowerShell Module) 1.1.124	175	Tuesday, August 16, 2022	Approved
dbatools (PowerShell Module) 1.1.122	467	Saturday, August 6, 2022	Approved
dbatools (PowerShell Module) 1.1.121	239	Thursday, August 4, 2022	Approved
dbatools (PowerShell Module) 1.1.120	291	Monday, August 1, 2022	Approved
dbatools (PowerShell Module) 1.1.119	242	Saturday, July 30, 2022	Approved
dbatools (PowerShell Module) 1.1.118	389	Monday, July 25, 2022	Approved
dbatools (PowerShell Module) 1.1.117	270	Thursday, July 21, 2022	Approved
dbatools (PowerShell Module) 1.1.116	135	Thursday, July 21, 2022	Approved
dbatools (PowerShell Module) 1.1.115	130	Thursday, July 21, 2022	Approved
dbatools (PowerShell Module) 1.1.114	441	Thursday, July 14, 2022	Approved
dbatools (PowerShell Module) 1.1.113	290	Monday, July 11, 2022	Approved
dbatools (PowerShell Module) 1.1.112	250	Friday, July 8, 2022	Approved
dbatools (PowerShell Module) 1.1.111	330	Sunday, July 3, 2022	Approved
dbatools (PowerShell Module) 1.1.110	203	Thursday, June 30, 2022	Approved
dbatools (PowerShell Module) 1.1.109	224	Wednesday, June 29, 2022	Approved
dbatools (PowerShell Module) 1.1.108	366	Friday, June 24, 2022	Approved
dbatools (PowerShell Module) 1.1.107	274	Wednesday, June 22, 2022	Approved
dbatools (PowerShell Module) 1.1.106	526	Wednesday, June 15, 2022	Approved
dbatools (PowerShell Module) 1.1.105	110	Wednesday, June 15, 2022	Approved
dbatools (PowerShell Module) 1.1.104	203	Tuesday, June 14, 2022	Approved
dbatools (PowerShell Module) 1.1.103	451	Sunday, June 5, 2022	Approved
dbatools (PowerShell Module) 1.1.102	234	Thursday, June 2, 2022	Approved
dbatools (PowerShell Module) 1.1.101	311	Sunday, May 29, 2022	Approved
dbatools (PowerShell Module) 1.1.100	139	Saturday, May 28, 2022	Approved
dbatools (PowerShell Module) 1.1.99	192	Friday, May 27, 2022	Approved
dbatools (PowerShell Module) 1.1.98	244	Tuesday, May 24, 2022	Approved
dbatools (PowerShell Module) 1.1.97	131	Tuesday, May 24, 2022	Approved
dbatools (PowerShell Module) 1.1.96	506	Saturday, May 21, 2022	Approved
dbatools (PowerShell Module) 1.1.95	970	Wednesday, May 11, 2022	Approved
dbatools (PowerShell Module) 1.1.94	49	Tuesday, May 10, 2022	Approved
dbatools (PowerShell Module) 1.1.93	218	Tuesday, May 10, 2022	Approved
dbatools (PowerShell Module) 1.1.92	357	Sunday, May 8, 2022	Approved
dbatools (PowerShell Module) 1.1.91	304	Friday, May 6, 2022	Approved
dbatools (PowerShell Module) 1.1.90	309	Wednesday, May 4, 2022	Approved
dbatools (PowerShell Module) 1.1.89	620	Thursday, April 28, 2022	Approved
dbatools (PowerShell Module) 1.1.88	1377	Friday, April 8, 2022	Approved
dbatools (PowerShell Module) 1.1.87	250	Wednesday, April 6, 2022	Approved
dbatools (PowerShell Module) 1.1.86	244	Monday, April 4, 2022	Approved
dbatools (PowerShell Module) 1.1.85	312	Saturday, April 2, 2022	Approved
dbatools (PowerShell Module) 1.1.84	470	Thursday, March 31, 2022	Approved
dbatools (PowerShell Module) 1.1.83	238	Tuesday, March 29, 2022	Approved
dbatools (PowerShell Module) 1.1.82	653	Friday, March 25, 2022	Approved
dbatools (PowerShell Module) 1.1.81	917	Wednesday, March 16, 2022	Approved
dbatools (PowerShell Module) 1.1.80	186	Tuesday, March 15, 2022	Approved
dbatools (PowerShell Module) 1.1.79	142	Monday, March 14, 2022	Approved
dbatools (PowerShell Module) 1.1.78	588	Friday, March 11, 2022	Approved
dbatools (PowerShell Module) 1.1.77	92	Friday, March 11, 2022	Approved
dbatools (PowerShell Module) 1.1.76	747	Saturday, March 5, 2022	Approved
dbatools (PowerShell Module) 1.1.75	786	Saturday, February 26, 2022	Approved
dbatools (PowerShell Module) 1.1.74	193	Thursday, February 24, 2022	Approved
dbatools (PowerShell Module) 1.1.73	220	Tuesday, February 22, 2022	Approved
dbatools (PowerShell Module) 1.1.72	251	Monday, February 21, 2022	Approved
dbatools (PowerShell Module) 1.1.71	682	Tuesday, February 15, 2022	Approved
dbatools (PowerShell Module) 1.1.70	762	Wednesday, February 9, 2022	Approved
dbatools (PowerShell Module) 1.1.69	265	Monday, February 7, 2022	Approved
dbatools (PowerShell Module) 1.1.68	150	Monday, February 7, 2022	Approved
dbatools (PowerShell Module) 1.1.67	521	Saturday, February 5, 2022	Approved
dbatools (PowerShell Module) 1.1.66	158	Friday, February 4, 2022	Approved
dbatools (PowerShell Module) 1.1.65	230	Thursday, February 3, 2022	Approved
dbatools (PowerShell Module) 1.1.64	102	Wednesday, February 2, 2022	Approved
dbatools (PowerShell Module) 1.1.63	239	Tuesday, February 1, 2022	Approved
dbatools (PowerShell Module) 1.1.62	332	Sunday, January 30, 2022	Approved
dbatools (PowerShell Module) 1.1.61	354	Saturday, January 29, 2022	Approved
dbatools (PowerShell Module) 1.1.60	303	Tuesday, January 25, 2022	Approved
dbatools (PowerShell Module) 1.1.59	630	Thursday, January 20, 2022	Approved
dbatools (PowerShell Module) 1.1.58	124	Thursday, January 20, 2022	Approved
dbatools (PowerShell Module) 1.1.57	139	Thursday, January 20, 2022	Approved
dbatools (PowerShell Module) 1.1.56	232	Tuesday, January 18, 2022	Approved
dbatools (PowerShell Module) 1.1.55	143	Tuesday, January 18, 2022	Approved
dbatools (PowerShell Module) 1.1.54	540	Saturday, January 15, 2022	Approved
dbatools (PowerShell Module) 1.1.53	152	Friday, January 14, 2022	Approved
dbatools (PowerShell Module) 1.1.52	84	Friday, January 14, 2022	Approved
dbatools (PowerShell Module) 1.1.51	162	Thursday, January 13, 2022	Approved
dbatools (PowerShell Module) 1.1.50	206	Tuesday, January 11, 2022	Approved
dbatools (PowerShell Module) 1.1.49	631	Thursday, January 6, 2022	Approved
dbatools (PowerShell Module) 1.1.48	243	Tuesday, January 4, 2022	Approved
dbatools (PowerShell Module) 1.1.46	835	Thursday, December 23, 2021	Approved
dbatools (PowerShell Module) 1.1.45	184	Wednesday, December 22, 2021	Approved
dbatools (PowerShell Module) 1.1.44	742	Tuesday, December 14, 2021	Approved
dbatools (PowerShell Module) 1.1.43	614	Friday, December 10, 2021	Approved
dbatools (PowerShell Module) 1.1.42	210	Wednesday, December 8, 2021	Approved
dbatools (PowerShell Module) 1.1.41	650	Friday, December 3, 2021	Approved
dbatools (PowerShell Module) 1.1.40	214	Wednesday, December 1, 2021	Approved
dbatools (PowerShell Module) 1.1.39	194	Monday, November 29, 2021	Approved
dbatools (PowerShell Module) 1.1.38	683	Wednesday, November 24, 2021	Approved
dbatools (PowerShell Module) 1.1.37	180	Tuesday, November 23, 2021	Approved
dbatools (PowerShell Module) 1.1.36	664	Friday, November 19, 2021	Approved
dbatools (PowerShell Module) 1.1.35	362	Monday, November 15, 2021	Approved
dbatools (PowerShell Module) 1.1.34	569	Thursday, November 11, 2021	Approved
dbatools (PowerShell Module) 1.1.33	231	Tuesday, November 9, 2021	Approved
dbatools (PowerShell Module) 1.1.32	602	Saturday, November 6, 2021	Approved
dbatools (PowerShell Module) 1.1.31	419	Monday, November 1, 2021	Approved
dbatools (PowerShell Module) 1.1.30	90	Monday, November 1, 2021	Approved
dbatools (PowerShell Module) 1.1.29	470	Thursday, October 28, 2021	Approved
dbatools (PowerShell Module) 1.1.28	92	Thursday, October 28, 2021	Approved
dbatools (PowerShell Module) 1.1.27	293	Tuesday, October 26, 2021	Approved
dbatools (PowerShell Module) 1.1.26	470	Saturday, October 23, 2021	Approved
dbatools (PowerShell Module) 1.1.25	304	Wednesday, October 20, 2021	Approved
dbatools (PowerShell Module) 1.1.24	817	Tuesday, October 12, 2021	Approved
dbatools (PowerShell Module) 1.1.23	712	Wednesday, October 6, 2021	Approved
dbatools (PowerShell Module) 1.1.22	264	Tuesday, October 5, 2021	Approved
dbatools (PowerShell Module) 1.1.21	835	Monday, September 27, 2021	Approved
dbatools (PowerShell Module) 1.1.20	600	Wednesday, September 22, 2021	Approved
dbatools (PowerShell Module) 1.1.19	609	Saturday, September 18, 2021	Approved
dbatools (PowerShell Module) 1.1.18	351	Wednesday, September 15, 2021	Approved
dbatools (PowerShell Module) 1.1.17	91	Tuesday, September 14, 2021	Approved
dbatools (PowerShell Module) 1.1.16	109	Tuesday, September 14, 2021	Approved
dbatools (PowerShell Module) 1.1.15	1000	Thursday, September 2, 2021	Approved
dbatools (PowerShell Module) 1.1.14	69	Tuesday, August 31, 2021	Approved
dbatools (PowerShell Module) 1.1.13	279	Tuesday, August 31, 2021	Approved
dbatools (PowerShell Module) 1.1.12	916	Tuesday, August 24, 2021	Approved
dbatools (PowerShell Module) 1.1.11	1068	Wednesday, August 11, 2021	Approved
dbatools (PowerShell Module) 1.1.10	225	Tuesday, August 10, 2021	Approved
dbatools (PowerShell Module) 1.1.9	619	Thursday, August 5, 2021	Approved
dbatools (PowerShell Module) 1.1.8	106	Thursday, August 5, 2021	Approved
dbatools (PowerShell Module) 1.1.7	232	Tuesday, August 3, 2021	Approved
dbatools (PowerShell Module) 1.1.6	199	Monday, August 2, 2021	Approved
dbatools (PowerShell Module) 1.1.5	510	Saturday, July 31, 2021	Approved
dbatools (PowerShell Module) 1.1.4	155	Friday, July 30, 2021	Approved
dbatools (PowerShell Module) 1.1.3	156	Friday, July 30, 2021	Approved
dbatools (PowerShell Module) 1.1.1	202	Tuesday, July 27, 2021	Approved
dbatools (PowerShell Module) 1.1.0	653	Friday, July 23, 2021	Approved
dbatools (PowerShell Module) 1.0.173	758	Tuesday, July 13, 2021	Approved
dbatools (PowerShell Module) 1.0.171	260	Monday, July 12, 2021	Approved
dbatools (PowerShell Module) 1.0.170	608	Wednesday, July 7, 2021	Approved
dbatools (PowerShell Module) 1.0.169	183	Tuesday, July 6, 2021	Approved
dbatools (PowerShell Module) 1.0.168	385	Sunday, July 4, 2021	Approved
dbatools (PowerShell Module) 1.0.167	311	Saturday, July 3, 2021	Approved
dbatools (PowerShell Module) 1.0.166	179	Friday, July 2, 2021	Approved
dbatools (PowerShell Module) 1.0.165	329	Tuesday, June 29, 2021	Approved
dbatools (PowerShell Module) 1.0.164	448	Friday, June 25, 2021	Approved
dbatools (PowerShell Module) 1.0.163	212	Thursday, June 24, 2021	Approved
dbatools (PowerShell Module) 1.0.162	245	Tuesday, June 22, 2021	Approved
dbatools (PowerShell Module) 1.0.161	173	Monday, June 21, 2021	Approved
dbatools (PowerShell Module) 1.0.160	323	Friday, June 18, 2021	Approved
dbatools (PowerShell Module) 1.0.156	605	Friday, June 11, 2021	Approved
dbatools (PowerShell Module) 1.0.155	304	Wednesday, June 9, 2021	Approved
dbatools (PowerShell Module) 1.0.153	984	Wednesday, May 26, 2021	Approved
dbatools (PowerShell Module) 1.0.152	219	Tuesday, May 25, 2021	Approved
dbatools (PowerShell Module) 1.0.151	376	Sunday, May 23, 2021	Approved
dbatools (PowerShell Module) 1.0.150	144	Saturday, May 22, 2021	Approved
dbatools (PowerShell Module) 1.0.149	404	Wednesday, May 19, 2021	Approved
dbatools (PowerShell Module) 1.0.148	340	Friday, May 14, 2021	Approved
dbatools (PowerShell Module) 1.0.147	524	Thursday, May 6, 2021	Approved
dbatools (PowerShell Module) 1.0.146	207	Wednesday, May 5, 2021	Approved
dbatools (PowerShell Module) 1.0.145	821	Sunday, April 18, 2021	Approved
dbatools (PowerShell Module) 1.0.144	132	Sunday, April 18, 2021	Approved
dbatools (PowerShell Module) 1.0.142	839	Sunday, April 4, 2021	Approved
dbatools (PowerShell Module) 1.0.141	1096	Thursday, March 11, 2021	Approved
dbatools (PowerShell Module) 1.0.140	812	Tuesday, February 23, 2021	Approved
dbatools (PowerShell Module) 1.0.139	514	Tuesday, February 16, 2021	Approved
dbatools (PowerShell Module) 1.0.138	213	Monday, February 15, 2021	Approved
dbatools (PowerShell Module) 1.0.137	1615	Tuesday, January 19, 2021	Approved
dbatools (PowerShell Module) 1.0.136	1020	Monday, December 28, 2020	Approved
dbatools (PowerShell Module) 1.0.135	1037	Sunday, December 6, 2020	Approved
dbatools (PowerShell Module) 1.0.134	173	Friday, December 4, 2020	Approved
dbatools (PowerShell Module) 1.0.133	534	Monday, November 23, 2020	Approved
dbatools (PowerShell Module) 1.0.131	419	Monday, November 16, 2020	Approved
dbatools (PowerShell Module) 1.0.130	701	Friday, November 6, 2020	Approved
dbatools (PowerShell Module) 1.0.128	518	Monday, November 2, 2020	Approved
dbatools (PowerShell Module) 1.0.127	327	Wednesday, October 28, 2020	Approved
dbatools (PowerShell Module) 1.0.126	590	Thursday, October 22, 2020	Approved
dbatools (PowerShell Module) 1.0.125	500	Saturday, October 17, 2020	Approved
dbatools (PowerShell Module) 1.0.124	572	Wednesday, October 7, 2020	Approved
dbatools (PowerShell Module) 1.0.123	452	Friday, October 2, 2020	Approved
dbatools (PowerShell Module) 1.0.122	202	Thursday, October 1, 2020	Approved
dbatools (PowerShell Module) 1.0.121	378	Friday, September 25, 2020	Approved
dbatools (PowerShell Module) 1.0.120	568	Friday, September 18, 2020	Approved
dbatools (PowerShell Module) 1.0.119	385	Monday, September 14, 2020	Approved
dbatools (PowerShell Module) 1.0.116	782	Friday, August 28, 2020	Approved
dbatools (PowerShell Module) 1.0.115	1408	Saturday, July 25, 2020	Approved
dbatools (PowerShell Module) 1.0.114	1121	Saturday, July 4, 2020	Approved
dbatools (PowerShell Module) 1.0.113	948	Monday, June 15, 2020	Approved
dbatools (PowerShell Module) 1.0.112	869	Tuesday, June 2, 2020	Approved
dbatools (PowerShell Module) 1.0.111	785	Friday, May 22, 2020	Approved
dbatools (PowerShell Module) 1.0.110	194	Thursday, May 21, 2020	Approved
dbatools (PowerShell Module) 1.0.109	639	Thursday, May 14, 2020	Approved
dbatools (PowerShell Module) 1.0.108	791	Wednesday, May 6, 2020	Approved
dbatools (PowerShell Module) 1.0.107	676	Monday, April 27, 2020	Approved
dbatools (PowerShell Module) 1.0.106	513	Monday, April 20, 2020	Approved
dbatools (PowerShell Module) 1.0.105	500	Wednesday, April 15, 2020	Approved
dbatools (PowerShell Module) 1.0.104	845	Monday, March 30, 2020	Approved
dbatools (PowerShell Module) 1.0.103	558	Monday, March 23, 2020	Approved
dbatools (PowerShell Module) 1.0.102	429	Thursday, March 19, 2020	Approved
dbatools (PowerShell Module) 1.0.101	684	Tuesday, March 3, 2020	Approved
dbatools (PowerShell Module) 1.0.100	414	Friday, February 28, 2020	Approved
dbatools (PowerShell Module) 1.0.99	255	Thursday, February 27, 2020	Approved
dbatools (PowerShell Module) 1.0.97	647	Saturday, February 15, 2020	Approved
dbatools (PowerShell Module) 1.0.96	224	Saturday, February 15, 2020	Approved
dbatools (PowerShell Module) 1.0.95	227	Friday, February 14, 2020	Approved
dbatools (PowerShell Module) 1.0.93	271	Wednesday, February 12, 2020	Approved
dbatools (PowerShell Module) 1.0.92	326	Monday, February 10, 2020	Approved
dbatools (PowerShell Module) 1.0.91	391	Thursday, February 6, 2020	Approved
dbatools (PowerShell Module) 1.0.90	279	Monday, February 3, 2020	Approved
dbatools (PowerShell Module) 1.0.89	292	Saturday, February 1, 2020	Approved
dbatools (PowerShell Module) 1.0.88	503	Saturday, January 25, 2020	Approved
dbatools (PowerShell Module) 1.0.87	267	Thursday, January 23, 2020	Approved
dbatools (PowerShell Module) 1.0.86	260	Thursday, January 23, 2020	Approved
dbatools (PowerShell Module) 1.0.85	241	Monday, January 20, 2020	Approved
dbatools (PowerShell Module) 1.0.84	384	Friday, January 17, 2020	Approved
dbatools (PowerShell Module) 1.0.83	413	Friday, January 10, 2020	Approved
dbatools (PowerShell Module) 1.0.81	295	Wednesday, January 8, 2020	Approved
dbatools (PowerShell Module) 1.0.80	310	Monday, January 6, 2020	Approved
dbatools (PowerShell Module) 1.0.79	297	Friday, January 3, 2020	Approved
dbatools (PowerShell Module) 1.0.78	233	Thursday, January 2, 2020	Approved
dbatools (PowerShell Module) 1.0.77	302	Friday, December 20, 2019	Approved
dbatools (PowerShell Module) 1.0.75	486	Sunday, December 8, 2019	Approved
dbatools (PowerShell Module) 1.0.74	358	Monday, December 2, 2019	Approved
dbatools (PowerShell Module) 1.0.73	392	Friday, November 22, 2019	Approved
dbatools (PowerShell Module) 1.0.72	339	Tuesday, November 19, 2019	Approved
dbatools (PowerShell Module) 1.0.71	346	Thursday, November 14, 2019	Approved
dbatools (PowerShell Module) 1.0.68	276	Monday, November 11, 2019	Approved
dbatools (PowerShell Module) 1.0.67	587	Tuesday, November 5, 2019	Approved
dbatools (PowerShell Module) 1.0.66	213	Monday, November 4, 2019	Approved
dbatools (PowerShell Module) 1.0.65	316	Friday, November 1, 2019	Approved
dbatools (PowerShell Module) 1.0.64	284	Tuesday, October 29, 2019	Approved
dbatools (PowerShell Module) 1.0.62	283	Monday, October 28, 2019	Approved
dbatools (PowerShell Module) 1.0.61	279	Thursday, October 24, 2019	Approved
dbatools (PowerShell Module) 1.0.60	278	Tuesday, October 22, 2019	Approved
dbatools (PowerShell Module) 1.0.59	226	Monday, October 21, 2019	Approved
dbatools (PowerShell Module) 1.0.58	259	Sunday, October 20, 2019	Approved
dbatools (PowerShell Module) 1.0.57	252	Friday, October 18, 2019	Approved
dbatools (PowerShell Module) 1.0.55	200	Friday, October 18, 2019	Approved
dbatools (PowerShell Module) 1.0.54	271	Thursday, October 17, 2019	Approved
dbatools (PowerShell Module) 1.0.53	266	Tuesday, October 15, 2019	Approved
dbatools (PowerShell Module) 1.0.52	318	Monday, October 7, 2019	Approved
dbatools (PowerShell Module) 1.0.51	316	Wednesday, October 2, 2019	Approved
dbatools (PowerShell Module) 1.0.50	309	Friday, September 27, 2019	Approved
dbatools (PowerShell Module) 1.0.49	337	Tuesday, September 24, 2019	Approved
dbatools (PowerShell Module) 1.0.48	262	Monday, September 23, 2019	Approved
dbatools (PowerShell Module) 1.0.47	282	Friday, September 20, 2019	Approved
dbatools (PowerShell Module) 1.0.46	379	Saturday, September 14, 2019	Approved
dbatools (PowerShell Module) 1.0.45	246	Friday, September 13, 2019	Approved
dbatools (PowerShell Module) 1.0.44	257	Thursday, September 12, 2019	Approved
dbatools (PowerShell Module) 1.0.43	275	Tuesday, September 10, 2019	Approved
dbatools (PowerShell Module) 1.0.42	268	Sunday, September 8, 2019	Approved
dbatools (PowerShell Module) 1.0.41	238	Saturday, September 7, 2019	Approved
dbatools (PowerShell Module) 1.0.40	258	Thursday, September 5, 2019	Approved
dbatools (PowerShell Module) 1.0.39	524	Wednesday, September 4, 2019	Approved
dbatools (PowerShell Module) 1.0.38	459	Wednesday, August 28, 2019	Approved
dbatools (PowerShell Module) 1.0.36	263	Tuesday, August 27, 2019	Approved
dbatools (PowerShell Module) 1.0.35	347	Thursday, August 22, 2019	Approved
dbatools (PowerShell Module) 1.0.34	276	Monday, August 19, 2019	Approved
dbatools (PowerShell Module) 1.0.33	302	Thursday, August 15, 2019	Approved
dbatools (PowerShell Module) 1.0.32	263	Wednesday, August 14, 2019	Approved
dbatools (PowerShell Module) 1.0.30	344	Thursday, August 8, 2019	Approved
dbatools (PowerShell Module) 1.0.29	288	Saturday, August 3, 2019	Approved
dbatools (PowerShell Module) 1.0.28	240	Friday, August 2, 2019	Approved
dbatools (PowerShell Module) 1.0.27	281	Wednesday, July 31, 2019	Approved
dbatools (PowerShell Module) 1.0.26	235	Monday, July 29, 2019	Approved
dbatools (PowerShell Module) 1.0.25	215	Monday, July 29, 2019	Approved
dbatools (PowerShell Module) 1.0.23	355	Tuesday, July 23, 2019	Approved
dbatools (PowerShell Module) 1.0.22	353	Tuesday, July 16, 2019	Approved
dbatools (PowerShell Module) 1.0.21	311	Friday, July 12, 2019	Approved
dbatools (PowerShell Module) 1.0.20	300	Wednesday, July 10, 2019	Approved
dbatools (PowerShell Module) 1.0.19	239	Wednesday, July 10, 2019	Approved
dbatools (PowerShell Module) 1.0.17	268	Tuesday, July 9, 2019	Approved
dbatools (PowerShell Module) 1.0.15	285	Saturday, July 6, 2019	Approved
dbatools (PowerShell Module) 1.0.14	213	Friday, July 5, 2019	Approved
dbatools (PowerShell Module) 1.0.13	227	Thursday, July 4, 2019	Approved
dbatools (PowerShell Module) 1.0.12	293	Tuesday, July 2, 2019	Approved
dbatools (PowerShell Module) 1.0.11	197	Monday, July 1, 2019	Approved
dbatools (PowerShell Module) 1.0.10	232	Saturday, June 29, 2019	Approved
dbatools (PowerShell Module) 1.0.9	306	Wednesday, June 26, 2019	Approved
dbatools (PowerShell Module) 1.0.6	240	Wednesday, June 26, 2019	Approved
dbatools (PowerShell Module) 1.0.5	247	Monday, June 24, 2019	Approved
dbatools (PowerShell Module) 1.0.4	281	Sunday, June 23, 2019	Approved
dbatools (PowerShell Module) 1.0.3	239	Sunday, June 23, 2019	Approved
dbatools (PowerShell Module) 1.0.2	267	Friday, June 21, 2019	Approved
dbatools (PowerShell Module) 1.0.0	305	Thursday, June 20, 2019	Approved
dbatools (PowerShell Module) 0.9.834	451	Friday, May 31, 2019	Approved
dbatools (PowerShell Module) 0.9.833	231	Thursday, May 30, 2019	Approved
dbatools (PowerShell Module) 0.9.832	298	Friday, May 24, 2019	Approved
dbatools (PowerShell Module) 0.9.831	275	Thursday, May 23, 2019	Approved
dbatools (PowerShell Module) 0.9.830	282	Tuesday, May 21, 2019	Approved
dbatools (PowerShell Module) 0.9.829	208	Friday, May 17, 2019	Approved
dbatools (PowerShell Module) 0.9.828	289	Wednesday, May 15, 2019	Approved
dbatools (PowerShell Module) 0.9.827	278	Tuesday, May 14, 2019	Approved
dbatools (PowerShell Module) 0.9.826	266	Monday, May 13, 2019	Approved
dbatools (PowerShell Module) 0.9.825	307	Friday, May 10, 2019	Approved
dbatools (PowerShell Module) 0.9.824	254	Friday, May 10, 2019	Approved
dbatools (PowerShell Module) 0.9.823	264	Wednesday, May 8, 2019	Approved
dbatools (PowerShell Module) 0.9.822	287	Monday, May 6, 2019	Approved
dbatools (PowerShell Module) 0.9.821	317	Friday, May 3, 2019	Approved
dbatools (PowerShell Module) 0.9.819	267	Wednesday, May 1, 2019	Approved
dbatools (PowerShell Module) 0.9.818	261	Tuesday, April 30, 2019	Approved
dbatools (PowerShell Module) 0.9.817	236	Tuesday, April 30, 2019	Approved
dbatools (PowerShell Module) 0.9.815	238	Tuesday, April 30, 2019	Approved
dbatools (PowerShell Module) 0.9.814	255	Monday, April 29, 2019	Approved
dbatools (PowerShell Module) 0.9.812	286	Saturday, April 27, 2019	Approved
dbatools (PowerShell Module) 0.9.811	247	Thursday, April 25, 2019	Approved
dbatools (PowerShell Module) 0.9.810	287	Thursday, April 25, 2019	Approved
dbatools (PowerShell Module) 0.9.809	296	Saturday, April 20, 2019	Approved
dbatools (PowerShell Module) 0.9.808	232	Thursday, April 18, 2019	Approved
dbatools (PowerShell Module) 0.9.807	232	Wednesday, April 17, 2019	Approved
dbatools (PowerShell Module) 0.9.804	290	Monday, April 15, 2019	Approved
dbatools (PowerShell Module) 0.9.803	299	Wednesday, April 10, 2019	Approved
dbatools (PowerShell Module) 0.9.802	299	Sunday, April 7, 2019	Approved
dbatools (PowerShell Module) 0.9.801	260	Thursday, April 4, 2019	Approved
dbatools (PowerShell Module) 0.9.800	300	Monday, April 1, 2019	Approved
dbatools (PowerShell Module) 0.9.799	243	Sunday, March 31, 2019	Approved
dbatools (PowerShell Module) 0.9.798	254	Thursday, March 28, 2019	Approved
dbatools (PowerShell Module) 0.9.797	258	Tuesday, March 26, 2019	Approved
dbatools (PowerShell Module) 0.9.795	240	Sunday, March 24, 2019	Approved
dbatools (PowerShell Module) 0.9.794	263	Saturday, March 23, 2019	Approved
dbatools (PowerShell Module) 0.9.793	254	Thursday, March 21, 2019	Approved
dbatools (PowerShell Module) 0.9.792	279	Wednesday, March 20, 2019	Approved
dbatools (PowerShell Module) 0.9.785	196	Saturday, March 16, 2019	Approved
dbatools (PowerShell Module) 0.9.784	209	Tuesday, March 12, 2019	Approved
dbatools (PowerShell Module) 0.9.782	178	Monday, March 11, 2019	Approved
dbatools (PowerShell Module) 0.9.781	172	Saturday, March 9, 2019	Approved
dbatools (PowerShell Module) 0.9.780	196	Thursday, March 7, 2019	Approved
dbatools (PowerShell Module) 0.9.779	190	Wednesday, March 6, 2019	Approved
dbatools (PowerShell Module) 0.9.778	149	Tuesday, March 5, 2019	Approved
dbatools (PowerShell Module) 0.9.777	143	Monday, March 4, 2019	Approved
dbatools (PowerShell Module) 0.9.775	220	Tuesday, February 26, 2019	Approved
dbatools (PowerShell Module) 0.9.774	152	Tuesday, February 26, 2019	Approved
dbatools (PowerShell Module) 0.9.773	220	Monday, February 25, 2019	Approved
dbatools (PowerShell Module) 0.9.772	199	Sunday, February 24, 2019	Approved
dbatools (PowerShell Module) 0.9.771	190	Wednesday, February 20, 2019	Approved
dbatools (PowerShell Module) 0.9.770	245	Sunday, February 17, 2019	Approved
dbatools (PowerShell Module) 0.9.757	215	Tuesday, February 12, 2019	Approved
dbatools (PowerShell Module) 0.9.755	200	Sunday, February 10, 2019	Approved
dbatools (PowerShell Module) 0.9.754	179	Thursday, February 7, 2019	Approved
dbatools (PowerShell Module) 0.9.753	143	Thursday, February 7, 2019	Approved
dbatools (PowerShell Module) 0.9.752	179	Sunday, February 3, 2019	Approved
dbatools (PowerShell Module) 0.9.751	174	Thursday, January 31, 2019	Approved
dbatools (PowerShell Module) 0.9.750	302	Friday, January 25, 2019	Approved
dbatools (PowerShell Module) 0.9.749	249	Thursday, January 24, 2019	Approved
dbatools (PowerShell Module) 0.9.748	256	Thursday, January 24, 2019	Approved
dbatools (PowerShell Module) 0.9.747	382	Thursday, January 24, 2019	Approved
dbatools (PowerShell Module) 0.9.745	189	Wednesday, January 23, 2019	Approved
dbatools (PowerShell Module) 0.9.744	190	Wednesday, January 23, 2019	Approved
dbatools (PowerShell Module) 0.9.743	310	Monday, January 21, 2019	Approved
dbatools (PowerShell Module) 0.9.742	245	Tuesday, January 15, 2019	Approved
dbatools (PowerShell Module) 0.9.740	286	Friday, January 11, 2019	Approved
dbatools (PowerShell Module) 0.9.739	166	Friday, January 11, 2019	Approved
dbatools (PowerShell Module) 0.9.738	199	Thursday, January 10, 2019	Approved
dbatools (PowerShell Module) 0.9.737	190	Wednesday, January 9, 2019	Approved
dbatools (PowerShell Module) 0.9.735	166	Tuesday, January 8, 2019	Approved
dbatools (PowerShell Module) 0.9.734	263	Thursday, January 3, 2019	Approved
dbatools (PowerShell Module) 0.9.733	230	Monday, December 31, 2018	Approved
dbatools (PowerShell Module) 0.9.732	216	Thursday, December 27, 2018	Approved
dbatools (PowerShell Module) 0.9.731	202	Sunday, December 23, 2018	Approved
dbatools (PowerShell Module) 0.9.730	255	Friday, December 21, 2018	Approved
dbatools (PowerShell Module) 0.9.725	219	Thursday, December 20, 2018	Approved
dbatools (PowerShell Module) 0.9.724	192	Thursday, December 20, 2018	Approved
dbatools (PowerShell Module) 0.9.722	177	Wednesday, December 19, 2018	Approved
dbatools (PowerShell Module) 0.9.721	213	Tuesday, December 18, 2018	Approved
dbatools (PowerShell Module) 0.9.720	250	Sunday, December 16, 2018	Approved
dbatools (PowerShell Module) 0.9.719	206	Saturday, December 15, 2018	Approved
dbatools (PowerShell Module) 0.9.718	191	Friday, December 14, 2018	Approved
dbatools (PowerShell Module) 0.9.717	202	Friday, December 14, 2018	Approved
dbatools (PowerShell Module) 0.9.715	198	Thursday, December 13, 2018	Approved
dbatools (PowerShell Module) 0.9.714	247	Monday, December 10, 2018	Approved
dbatools (PowerShell Module) 0.9.712	311	Sunday, December 9, 2018	Approved
dbatools (PowerShell Module) 0.9.711	441	Friday, December 7, 2018	Approved
dbatools (PowerShell Module) 0.9.710	381	Thursday, December 6, 2018	Approved
dbatools (PowerShell Module) 0.9.709	195	Tuesday, December 4, 2018	Approved
dbatools (PowerShell Module) 0.9.707	141	Tuesday, December 4, 2018	Approved
dbatools (PowerShell Module) 0.9.704	205	Monday, December 3, 2018	Approved
dbatools (PowerShell Module) 0.9.703	188	Monday, December 3, 2018	Approved
dbatools (PowerShell Module) 0.9.702	140	Sunday, December 2, 2018	Approved
dbatools (PowerShell Module) 0.9.701	181	Saturday, December 1, 2018	Approved
dbatools (PowerShell Module) 0.9.538	184	Friday, November 30, 2018	Approved
dbatools (PowerShell Module) 0.9.537	179	Friday, November 30, 2018	Approved
dbatools (PowerShell Module) 0.9.535	153	Thursday, November 29, 2018	Approved
dbatools (PowerShell Module) 0.9.533	219	Wednesday, November 28, 2018	Approved
dbatools (PowerShell Module) 0.9.532	181	Tuesday, November 27, 2018	Approved
dbatools (PowerShell Module) 0.9.531	182	Sunday, November 25, 2018	Approved
dbatools (PowerShell Module) 0.9.530	162	Saturday, November 24, 2018	Approved
dbatools (PowerShell Module) 0.9.527	175	Saturday, November 24, 2018	Approved
dbatools (PowerShell Module) 0.9.523	141	Friday, November 23, 2018	Approved
dbatools (PowerShell Module) 0.9.521	245	Thursday, November 22, 2018	Approved
dbatools (PowerShell Module) 0.9.520	184	Thursday, November 22, 2018	Approved
dbatools (PowerShell Module) 0.9.519	195	Sunday, November 18, 2018	Approved
dbatools (PowerShell Module) 0.9.518	138	Friday, November 16, 2018	Approved
dbatools (PowerShell Module) 0.9.517	201	Friday, November 16, 2018	Approved
dbatools (PowerShell Module) 0.9.512	166	Wednesday, November 14, 2018	Approved
dbatools (PowerShell Module) 0.9.510	202	Wednesday, November 14, 2018	Approved
dbatools (PowerShell Module) 0.9.509	183	Monday, November 12, 2018	Approved
dbatools (PowerShell Module) 0.9.508	190	Monday, November 12, 2018	Approved
dbatools (PowerShell Module) 0.9.507	168	Saturday, November 10, 2018	Approved
dbatools (PowerShell Module) 0.9.504	170	Thursday, November 8, 2018	Approved
dbatools (PowerShell Module) 0.9.503	168	Thursday, November 8, 2018	Approved
dbatools (PowerShell Module) 0.9.502	156	Wednesday, November 7, 2018	Approved
dbatools (PowerShell Module) 0.9.501	176	Monday, November 5, 2018	Approved
dbatools (PowerShell Module) 0.9.500	175	Saturday, November 3, 2018	Approved
dbatools (PowerShell Module) 0.9.499	205	Friday, November 2, 2018	Approved
dbatools (PowerShell Module) 0.9.498	141	Friday, November 2, 2018	Approved
dbatools (PowerShell Module) 0.9.497	140	Wednesday, October 31, 2018	Approved
dbatools (PowerShell Module) 0.9.495	175	Tuesday, October 30, 2018	Approved
dbatools (PowerShell Module) 0.9.494	161	Tuesday, October 30, 2018	Approved
dbatools (PowerShell Module) 0.9.492	156	Sunday, October 28, 2018	Approved
dbatools (PowerShell Module) 0.9.491	187	Friday, October 26, 2018	Approved
dbatools (PowerShell Module) 0.9.490	149	Wednesday, October 24, 2018	Approved
dbatools (PowerShell Module) 0.9.489	160	Wednesday, October 24, 2018	Approved
dbatools (PowerShell Module) 0.9.487	209	Friday, October 19, 2018	Approved
dbatools (PowerShell Module) 0.9.485	122	Thursday, October 18, 2018	Approved
dbatools (PowerShell Module) 0.9.484	170	Tuesday, October 16, 2018	Approved
dbatools (PowerShell Module) 0.9.483	164	Monday, October 15, 2018	Approved
dbatools (PowerShell Module) 0.9.481	186	Monday, October 15, 2018	Approved
dbatools (PowerShell Module) 0.9.479	177	Monday, October 15, 2018	Approved
dbatools (PowerShell Module) 0.9.477	149	Friday, October 12, 2018	Approved
dbatools (PowerShell Module) 0.9.475	139	Friday, October 12, 2018	Approved
dbatools (PowerShell Module) 0.9.472	183	Tuesday, October 9, 2018	Approved
dbatools (PowerShell Module) 0.9.471	161	Monday, October 8, 2018	Approved
dbatools (PowerShell Module) 0.9.470	166	Sunday, October 7, 2018	Approved
dbatools (PowerShell Module) 0.9.459	161	Sunday, October 7, 2018	Approved
dbatools (PowerShell Module) 0.9.458	178	Saturday, October 6, 2018	Approved
dbatools (PowerShell Module) 0.9.455	193	Friday, October 5, 2018	Approved
dbatools (PowerShell Module) 0.9.454	166	Thursday, October 4, 2018	Approved
dbatools (PowerShell Module) 0.9.450	177	Monday, October 1, 2018	Approved
dbatools (PowerShell Module) 0.9.447	178	Saturday, September 29, 2018	Approved
dbatools (PowerShell Module) 0.9.445	135	Thursday, September 27, 2018	Approved
dbatools (PowerShell Module) 0.9.442	160	Wednesday, September 26, 2018	Approved
dbatools (PowerShell Module) 0.9.440	144	Wednesday, September 26, 2018	Approved
dbatools (PowerShell Module) 0.9.439	159	Wednesday, September 26, 2018	Approved
dbatools (PowerShell Module) 0.9.438	169	Wednesday, September 26, 2018	Approved
dbatools (PowerShell Module) 0.9.435	176	Monday, September 24, 2018	Approved
dbatools (PowerShell Module) 0.9.434	169	Sunday, September 23, 2018	Approved
dbatools (PowerShell Module) 0.9.433	172	Friday, September 21, 2018	Approved
dbatools (PowerShell Module) 0.9.432	143	Friday, September 21, 2018	Approved
dbatools (PowerShell Module) 0.9.431	176	Wednesday, September 19, 2018	Approved
dbatools (PowerShell Module) 0.9.428	145	Wednesday, September 19, 2018	Approved
dbatools (PowerShell Module) 0.9.427	152	Tuesday, September 18, 2018	Approved
dbatools (PowerShell Module) 0.9.424	175	Tuesday, September 18, 2018	Approved
dbatools (PowerShell Module) 0.9.422	194	Monday, September 17, 2018	Approved
dbatools (PowerShell Module) 0.9.419	170	Friday, September 14, 2018	Approved
dbatools (PowerShell Module) 0.9.417	435	Sunday, September 9, 2018	Approved
dbatools (PowerShell Module) 0.9.415	157	Saturday, September 8, 2018	Approved
dbatools (PowerShell Module) 0.9.412	147	Saturday, September 8, 2018	Approved
dbatools (PowerShell Module) 0.9.411	155	Friday, September 7, 2018	Approved
dbatools (PowerShell Module) 0.9.410	206	Friday, September 7, 2018	Approved
dbatools (PowerShell Module) 0.9.402	161	Thursday, September 6, 2018	Approved
dbatools (PowerShell Module) 0.9.400	146	Wednesday, September 5, 2018	Approved
dbatools (PowerShell Module) 0.9.399	182	Friday, August 31, 2018	Approved
dbatools (PowerShell Module) 0.9.398	189	Friday, August 31, 2018	Approved
dbatools (PowerShell Module) 0.9.395	244	Tuesday, August 28, 2018	Approved
dbatools (PowerShell Module) 0.9.394	169	Monday, August 27, 2018	Approved
dbatools (PowerShell Module) 0.9.393	199	Friday, August 24, 2018	Approved
dbatools (PowerShell Module) 0.9.392	171	Wednesday, August 22, 2018	Approved
dbatools (PowerShell Module) 0.9.390	161	Tuesday, August 21, 2018	Approved
dbatools (PowerShell Module) 0.9.389	163	Sunday, August 19, 2018	Approved
dbatools (PowerShell Module) 0.9.388	139	Friday, August 17, 2018	Approved
dbatools (PowerShell Module) 0.9.387	196	Thursday, August 16, 2018	Approved
dbatools (PowerShell Module) 0.9.385	216	Wednesday, August 8, 2018	Approved
dbatools (PowerShell Module) 0.9.384	199	Friday, August 3, 2018	Approved
dbatools (PowerShell Module) 0.9.383	170	Thursday, August 2, 2018	Approved
dbatools (PowerShell Module) 0.9.382	218	Thursday, July 26, 2018	Approved
dbatools (PowerShell Module) 0.9.381	153	Thursday, July 26, 2018	Approved
dbatools (PowerShell Module) 0.9.380	181	Tuesday, July 24, 2018	Approved
dbatools (PowerShell Module) 0.9.378	213	Monday, July 23, 2018	Approved
dbatools (PowerShell Module) 0.9.377	191	Saturday, July 21, 2018	Approved
dbatools (PowerShell Module) 0.9.376	213	Wednesday, July 18, 2018	Approved
dbatools (PowerShell Module) 0.9.375	211	Monday, July 16, 2018	Approved
dbatools (PowerShell Module) 0.9.362	239	Friday, June 29, 2018	Approved

2018 Chrissy LeMaire

Release Notes

https://github.com/sqlcollaborative/dbatools/releases

Dependencies

This package has no dependencies.

Discussion for the dbatools (PowerShell Module) Package

Ground Rules:

This discussion is only about dbatools (PowerShell Module) and the dbatools (PowerShell Module) package. If you have feedback for Chocolatey, please contact the Google Group.
This discussion will carry over multiple versions. If you have a comment about a particular version, please note that in your comments.
The maintainers of this Chocolatey Package will be notified about new comments that are posted to this Disqus thread, however, it is NOT a guarantee that you will get a response. If you do not hear back from the maintainers after posting a message below, please follow up by using the link on the left side of this page or follow this link to contact maintainers. If you still hear nothing back, please follow the package triage process.
Tell us what you love about the package or dbatools (PowerShell Module), or tell us what needs improvement.
Share your experiences with the package, or extra configuration or gotchas that you've found.
If you use a url, the comment will be flagged for moderation until you've been whitelisted. Disqus moderated comments are approved on a weekly schedule if not sooner. It could take between 1-5 days for your comment to show up.